This commit was manufactured by cvs2svn to create tag 'V1_1_8_4mdk'.V1_1_8_4mdk

399 files changed, 0 insertions, 722304 deletions

diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
deleted file mode 100644
index 10f4f0706..000000000
--- a/perl-install/ChangeLog
+++ /dev/null
@@ -1,25270 +0,0 @@
-2002/07/08  daouda
-
-	* Makefile.config: 
-	  - add drakbug
-
-	* drakxtools.spec: 
-	  - add dir recursively
-
-	* standalone/drakbug: 
-	  - detect package automatically when app is chosen
-	  - standalone app
-
-2002/07/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mount.c: small readability & size enhancement
-
-2002/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: in case the licence is refused, ask for
-	confirmation
-	help perl_checker
-
-	* diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind
-	buttons) for the raid tab
-
-	* diskdrake/interactive.pm: make Clear_all work on a LVM VG
-	make Clear_all remove partitions from raids
-
-	* Makefile: create the list_modules symlink
-	make test_pms should now work (was pb with list_modules.pm)
-
-2002/07/08  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: 
-	  - remove save_report menu entry, this is done by service_harddrake
-	  - move $in declaration near where it's used
-	eide hard disks : print master/slave for bus_location
-	  - remove dead stuff
-	  - comment some stuff
-	minor simplication
-	various cleanups:
-	  - move all harddrake modules to harddrake namespace
-	 - replace two use by require so that it's not done at compil time
-	   but at runtime
-	 - there was a missing $ in harddrake::ui.pm
-
-	* harddrake/TODO: update todo list
-
-	* install_steps_interactive.pm, standalone/draknet, harddrake/bttv.pm,
-	standalone/harddrake2, standalone/service_harddrake, harddrake/data.pm:
-	various cleanups:
-	  - move all harddrake modules to harddrake namespace
-	 - replace two use by require so that it's not done at compil time
-	   but at runtime
-	 - there was a missing $ in harddrake::ui.pm
-
-	* drakxtools.spec: 
-	  - some stuff moved into Makefile.drakxtools
-	  - fix harddrake menu entry
-	  - fix build
-	fixes for missing files
-	enhanced description
-
-	* modules.pm: 
-	  - s/snd-card/snd/
-	  - make some code clearer
-
-	* Makefile.drakxtools: 
-	  - simplifications
-	  - harddrake support is complete
-
-	* scanner.pm: this doesn't need either "#!/usr/bin/perl" nor "use lib
-	qw(/usr/lib/libDrakX);"
-
-	* standalone/drakxtv: 
-	  - fix options handling
-	  - use "perl -w"
-	  - s/bttv/harddrake::bttv/ due to recent changes
-
-2002/07/07  daouda
-
-	* drakxtools.spec: 
-	  - directory should exist before mv'ing things (mkdir
-	%%buildroot%%_initrddir)
-
-2002/07/07  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: smarter raidAutoStartRaidtab
-	great new raidAutoStartRaidtab allowing to handle existing software
-	raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-
-	* fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
-	software raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-
-	* devices.pm: use c::total_sectors() instead of BLKGETSIZE
-
-	* diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
-	marked dirty on any actions that destroy the raid
-
-2002/07/07  daouda
-
-	* Makefile: 
-	  - remove share/wizard.rc in DISTFILE
-
-	* drakxtools.spec: 
-	  - directory should exist before mv'ing things (mkdir
-	%%buildroot%%_initrddir)
-	  - mv typo in %install section (titi sux)
-
-2002/07/07  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: smarter raidAutoStartRaidtab
-	great new raidAutoStartRaidtab allowing to handle existing software
-	raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-	remove detect_devices::check (including the annoying log about no
-	modules for the pci entry)
-
-	* modules.pm: new "append_to_etc_modules" function
-	remove detect_devices::check (including the annoying log about no
-	modules for the pci entry)
-
-	* fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
-	software raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-
-	* any.pm: small regexp cleanup
-
-	* fs.pm, partition_table.pm: for greater symmetry with smb, drop isNfs in
-	favour of isThisFs('nfs', ...)
-
-	* interactive_newt.pm: make the buttons work in all cases
-	  - workaround segfaults
-	  - ensure the perl values are set when calling the clicked_may_quit
-	callback
-
-	* devices.pm: use c::total_sectors() instead of BLKGETSIZE
-
-	* diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
-	marked dirty on any actions that destroy the raid
-
-2002/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (ask_users): the user name length must be <= 32
-
-	* diskdrake/interactive.pm (as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* Makefile.config: standalone/drakbug doesn't exist! (why did deush add
-	it???)
-	it is standalone/harddrake2, not standalone/harddrake (poor deush must
-	be loosing his brain :p)
-
-	* diskdrake/hd_gtk.pm: s/check_type/diskdrake::interactive::check_type/
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-	(as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* fsedit.pm: /root and /mnt must "remain within the root filesystem" (ie
-	can't be used as mountpoints), dixit redhat
-	(package_needed_for_partition_type): return the package needed for a
-	partition type
-	(check_type): cleanup
-
-	* install_any.pm (setDefaultPackages): use
-	fsedit::package_needed_for_partition_type to get things like jfsprogs
-
-	* fs.pm: supermount now handles fs=auto, using it :)
-
-	* Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-
-2002/07/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Makefile.config: add the harddrake service which was missing
-
-	* printer.pm: try to simplify
-
-	* harddrake/ui.pm: simplify: use reverse
-	  - help system:
-	  - add an help entry in help menu;
-	   - begin to describe information fields
-	
-	   - reformat license in about window
-	
-	  - information frame (mostly fixing incoherency between various hw
-	  classes fields)
-	
-	   - s/media type/media class/
-	
-	   - s/info/Hardware id/
-	
-	   - s/device/device file/
-	
-	   - split description into manufacturer/description
-	
-	   - eide devices:
-	
-		  - rename bus as bus_location
-	
-	       - set interface_type as bus
-	
-	   - scsi devices:
-	
-	       - set bus to SCSI
-	
-		  - set bus_location to bus:id fields
-	
-	   - don't print pci subids when non set
-	
-	   - remove fields that were already used above (vendor id subvendor
-	     subid pci_bus pci_device pci_function)
-	
-	  - no need to return window after program exit
-	
-	  - print usage if needed
-	
-	  - embed hardware tree in a "detected hardware" frame
-	
-	  - cleanups:
-	
-	   - rename widget2 as frame
-	
-	   - remove dead commented code
-
-	* drakxtools.spec: add harddrake2 service
-
-	* standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/usb.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/hw_network.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/cd.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/tv.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/modem.png,
-	standalone/icons/harddrake2/K7.png: add harddrake2 icons
-
-2002/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (ask_users): the user name length must be <= 32
-
-	* commands.pm: adapt to new modprobe.pm
-
-	* diskdrake/hd_gtk.pm: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-	(as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* diskdrake/interactive.pm (as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-	(Resize): resize2fs handles ext3 :)
-
-	* install_any.pm (setDefaultPackages): use
-	fsedit::package_needed_for_partition_type to get things like jfsprogs
-	when merge_fstabs, handle in a different way mtab and fstab (or
-	manualFstab)
-	=> this allows to force the type&options in manualFstab
-
-	* fsedit.pm (package_needed_for_partition_type): return the package needed
-	for a partition type
-	(check_type): cleanup
-
-	* docs/comparisons: various remarks about mandrake
-
-	* partition_table_lvm_PV.pm: Allows people having PVs on unpartitioned
-	disks to install
-	(but no way to create such beasts)
-
-	* Makefile.config: standalone/drakbug doesn't exist! (why did deush add
-	it???)
-	it is standalone/harddrake2, not standalone/harddrake (poor deush must
-	be loosing his brain :p)
-	add harddrake pm's
-
-	* partition_table.pm: Allows people having PVs on unpartitioned disks to
-	install
-	(but no way to create such beasts)
-	cleanup
-
-	* fs.pm: supermount now handles fs=auto, using it :)
-	when merge_fstabs, handle in a different way mtab and fstab (or
-	manualFstab)
-	=> this allows to force the type&options in manualFstab
-
-	* Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-
-2002/07/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/lsnetdrake: simplify
-
-	* Makefile: add harddrake to DISTFILES
-
-	* printer.pm: try to simplify
-
-	* harddrake/TODO: add bits regarding eide and scsi
-
-	* standalone/harddrake2: add missing 'use lib' due to harddrak::ui changes
-
-	* harddrake/ui.pm: simplify: use reverse
-	  - help system:
-	  - add an help entry in help menu;
-	   - begin to describe information fields
-	
-	   - reformat license in about window
-	
-	  - information frame (mostly fixing incoherency between various hw
-	  classes fields)
-	
-	   - s/media type/media class/
-	
-	   - s/info/Hardware id/
-	
-	   - s/device/device file/
-	
-	   - split description into manufacturer/description
-	
-	   - eide devices:
-	
-		  - rename bus as bus_location
-	
-	       - set interface_type as bus
-	
-	   - scsi devices:
-	
-	       - set bus to SCSI
-	
-		  - set bus_location to bus:id fields
-	
-	   - don't print pci subids when non set
-	
-	   - remove fields that were already used above (vendor id subvendor
-	     subid pci_bus pci_device pci_function)
-	
-	  - no need to return window after program exit
-	
-	  - print usage if needed
-	
-	  - embed hardware tree in a "detected hardware" frame
-	
-	  - cleanups:
-	
-	   - rename widget2 as frame
-	
-	   - remove dead commented code
-
-	* harddrake/data.pm: add a configurator for sound
-
-	* standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/usb.png,
-	standalone/icons/harddrake2/hw_network.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/cd.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/K7.png,
-	standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/modem.png: add harddrake2 icons
-
-2002/07/05  daouda
-
-	* Makefile.config: 
-	  - add harddrake drakbug drakTermServ to STANDALONEPMS_
-
-	* drakxtools.spec: 
-	  - snapshot
-	  - new entries:
-	o harddrake2 : new hardware detection && configuration tool
-		o drakbugreport: bug reporting tool a la Kde (not working!)
-		o drakTermServ : configuration tool for diskless stations.
-
-2002/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (prepare_write_fstab): for supermount, have "none" as the device
-	(cleaner, and
-	more coherent with the "supermount" script (tx to FredC))
-
-2002/07/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* install_steps_interactive.pm: minimize startup: only load
-	harddrake::bttv if the user click on "tv
-	card" field in the hw summary window
-	use harddrake::bttv to let people configure their tv card if it's
-	misdetected
-
-	* harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
-	a module)
-	POSIX is no more used too.
-
-	* harddrake/bttv.pm: remove device test: there're only two harddrake::bttv
-	users,
-	install_steps_interactive.pm and drakxtv which both have already
-	tested that a bttv managed tv card is there.
-	  - add more tv cards
-	  - enable users to select number of buffers for mmap()
-	  - better description for pll setting
-	
-	  - add tooltips help for some entries
-	tv cards list:
-	
-		- split multi-cards entries
-	
-	     - reverse the hash (needed since now bttv card types are not
-	       anymore unique)
-	
-		- complete the list from various sources
-	
-		- use a tree to display the list, it's clearer now since it's
-	       splitted by vendors
-	
-	  - longer message
-	  - remove uneeded stuff for modules ("#!/..", "use lib..", "use
-	  standalone", ...)
-	
-	  - simplify bttv options managment:
-	
-	   - use if_, thanks MDK::Common
-	
-	   - s/mapn/map by using a hash at first
-	
-	   - s/mapn{if}/map{if_}
-	
-	  - don't read/write modules.conf here, drakx take care of that for us
-	
-	thus, the test program became:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use bttv;
-	use interactive;
-	use modules;
-	
-	modules::read_conf;
-	bttv::config('interactive'->vnew());
-	modules::write_conf;
-	spec29: bttv configuration part of drakxtv.
-	it can be used by:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use harddrake::bttv;
-	use interactive;
-	
-	bttv::config('interactive'->vnew());
-
-	* drakxtools.spec: fix typo
-	fix dirs1/dirs2 mismatch
-	  - M-q descriptions
-	  - simplify file lists building
-	  - we can use several -f on one "%%files" line
-
-	* standalone/drakxtv: if we're root and there's a tv card managed by bttv,
-	offer to
-	configure bttv trough harddrake::bttv
-
-	* tools/cvslog2changelog.pl: typo fix
-
-	* harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/05  François Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: 
-	  - handle /lib/i686 case
-	  - replace Mandrake/RPMS with Mandrake/RPMS*
-
-2002/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/config.h,
-	mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/pcmcia/tcic.h,
-	mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c:
-	pcmcia is now pcmcia_ (it was to begin with a clean branch of unmodified
-	sources)
-
-2002/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: make it work with "use
-	strict"
-	do not look at the mar files anymore, only use kernel/modules.pl (and so
-	list_modules.pm)
-
-	* diskdrake/interactive.pm: handle comments in fstab
-
-	* fs.pm (merge_info_from_fstab): try to keep options from merged fstab IF
-	the entry is for the same mountpoint AND the same device
-	handle comments in fstab
-
-	* share/rpmsrate: add gnupg in "4 SYSTEM", so that rpm do not *Require*
-	gnupg, only suggest it very strongly :)
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: 
-	  - do not use mar files for the list of modules, use list_modules.pm
-	via kernel/modules.pl instead
-	  - use read_pcitable to parse usbtable
-
-2002/07/05  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
-	a module)
-	POSIX is no more used too.
-
-	* drakxtools.spec: fix typo
-	fix dirs1/dirs2 mismatch
-	  - M-q descriptions
-	  - simplify file lists building
-	  - we can use several -f on one "%%files" line
-	  - add preliminary harddrake support
-	
-	  - clean %post
-	
-	  - bump version number
-
-	* harddrake/bttv.pm: 
-	  - remove uneeded stuff for modules ("#!/..", "use lib..", "use
-	standalone", ...)
-	  - simplify bttv options managment:
-	
-	   - use if_, thanks MDK::Common
-	
-	   - s/mapn/map by using a hash at first
-	
-	   - s/mapn{if}/map{if_}
-	
-	  - don't read/write modules.conf here, drakx take care of that for us
-	
-	thus, the test program became:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use bttv;
-	use interactive;
-	use modules;
-	
-	modules::read_conf;
-	bttv::config('interactive'->vnew());
-	modules::write_conf;
-	spec29: bttv configuration part of drakxtv.
-	it can be used by:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use harddrake::bttv;
-	use interactive;
-	
-	bttv::config('interactive'->vnew());
-
-	* Makefile: don't use sed when not needed
-
-	* install_steps_interactive.pm: minimize startup: only load
-	harddrake::bttv if the user click on "tv
-	card" field in the hw summary window
-	use harddrake::bttv to let people configure their tv card if it's
-	misdetected
-
-	* harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
-	printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
-	install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
-	modules.pm
-
-	* c/stuff.xs.pm: adapt to new ldetect
-
-	* modules.pm: reworked, cleaned:
-	  - the list of modules is moved to kernel/list_modules.pm (and a few
-	functions too)
-	  - new "add_probeall" function (similar to "add_alias")
-	  -> used for scsi_hostadapter and usb-interface
-	  - "load_multi" removed in favour of "load" which is now more powerful
-	  - load_thiskind renamed load_category
-	  - get_that_type renamed probe_category
-	  - %modules::drivers dropped (handled for list_modules)
-	still more cleanup to come
-
-	* rescue/make_rescue_img: adapt to the move all.modules ->
-	kernel/all.modules  and  all.kernels -> kernel/all.kernels
-
-	* modparm.pm: rework, cleanup, simplify and make it work
-
-	* install2: create symlink list_modules.pm in current directory for
-	testing purpose
-
-	* Makefile: when building the tar for drakxtools, handle specially
-	list_modules.pm
-	adapt to the move all.modules -> kernel/all.modules  and  all.kernels ->
-	kernel/all.kernels
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
-	containing:
-	  - all.modules all.kernels update_kernel
-	  - part of perl-install/modules.pm now in kernel/list_modules.pm and
-	kernel/modules.pl
-	  - update_kernel cleaned (it doesn't mention module names anymore, it
-	is now in kernel/modules.pl)
-	  - cleanup Makefile
-	  - mdk-stage1 doesn't depend on perl-install anymore
-	(more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
-	* any.pm: reworked & cleaned the kernel modules part
-	  - adapt to new modules.pm
-	  - adapt to new modparm.pm
-	  - renamed setup_thiskind to load_category
-	  - renamed setup_thiskind_backend to load_category_no_message
-
-	* share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04  daouda
-
-	* standalone/draknet: 
-	  - don't display clear password
-
-2002/07/04  fcrozat
-
-	* share/rpmsrate: Fix GNOME2 packages
-	Install urw-fonts when installing XFree
-
-2002/07/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/fr.po: updated French file
-
-	* lang.pm: Changed some languages to defautl to utf-8
-	removed X11_NOT_LOCALIZED (now Gnome2 fully supports right-to-left
-	languages)
-
-2002/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
-	printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
-	install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
-	modules.pm
-
-	* c/stuff.xs.pm: adapt to new ldetect
-
-	* modules.pm: reworked, cleaned:
-	  - the list of modules is moved to kernel/list_modules.pm (and a few
-	functions too)
-	  - new "add_probeall" function (similar to "add_alias")
-	  -> used for scsi_hostadapter and usb-interface
-	  - "load_multi" removed in favour of "load" which is now more powerful
-	  - load_thiskind renamed load_category
-	  - get_that_type renamed probe_category
-	  - %modules::drivers dropped (handled for list_modules)
-	still more cleanup to come
-
-	* getpkgs_deps, do_resize_fat: removed since unused
-
-	* Makefile, rescue/make_rescue_img: adapt to the move all.modules ->
-	kernel/all.modules  and  all.kernels -> kernel/all.kernels
-
-	* modparm.pm: rework, cleanup, simplify and make it work
-
-	* install2: create symlink list_modules.pm in current directory for
-	testing purpose
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
-	containing:
-	  - all.modules all.kernels update_kernel
-	  - part of perl-install/modules.pm now in kernel/list_modules.pm and
-	kernel/modules.pl
-	  - update_kernel cleaned (it doesn't mention module names anymore, it
-	is now in kernel/modules.pl)
-	  - cleanup Makefile
-	  - mdk-stage1 doesn't depend on perl-install anymore
-	(more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
-	* tools/specific_arch: simplified using MDK::Common
-
-	* any.pm: reworked & cleaned the kernel modules part
-	  - adapt to new modules.pm
-	  - adapt to new modparm.pm
-	  - renamed setup_thiskind to load_category
-	  - renamed setup_thiskind_backend to load_category_no_message
-
-	* share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* harddrake/TODO: add harddrake2 todo list
-
-	* harddrake/data.pm: get rid of 'use vars'
-	remove wait_message hack for printerdraker, better use class_discard
-	harddrake2: "the return of the vengeance son"
-	  - harddrake/data.pm: the data structure
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-	* harddrake/ui.pm: don't stack signals on config buttons
-	  - remove no more used @pid_launched
-	  - better GUI reactivity: don't wait for config tool to complete, just
-	  "fork and forget" [(c) us air force] and refuse to run another
-	  config tool until the first one to complete
-	print "Running $configurator ..." in status bar while running a config
-	tool
-	  - POSIX is needed for POSIX::wait
-	  - move strict and standalone require at top
-	
-	  - c is unused
-	
-	  - comment exceptions in devices loop (ie skip classes without any
-	  devices or any detector
-	
-	  - optimize away $pid
-	fix move from harddrake.pm to harddrake/data.pm:
-	
-	  - menu does appear
-	
-	  - information fields are translated from raw to english again
-	harddrake2: "the return of the vengeance son"
-	
-	  - harddrake/data.pm: the data structure
-	
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-	* detect_devices.pm: add tapes() for harddrake2
-
-	* standalone/harddrake2, standalone/service_harddrake: harddrake2: "the
-	return of the vengeance son"
-	  - harddrake/data.pm: the data structure
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-2002/07/03  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: fixed static definition when non static
-	declaration (gcc limitation).
-	added conditional code around network detection.
-
-2002/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/minilibc.c,
-	mdk-stage1/newt/newt.c, mdk-stage1/bzlib/bzlib.c,
-	mdk-stage1/newt/listbox.c, mdk-stage1/newt-frontend.c,
-	mdk-stage1/disk.c, mdk-stage1/modules.c, mdk-stage1/stage1.c,
-	mdk-stage1/newt/checkboxtree.c, mdk-stage1/mar/mar-frontend.c,
-	mdk-stage1/Makefile.common, mdk-stage1/url.c, mdk-stage1/newt/textbox.c,
-	mdk-stage1/newt/grid.c, mdk-stage1/dhcp.c, mdk-stage1/init.c,
-	mdk-stage1/automatic.c, mdk-stage1/newt/entry.c: compile with -W
-
-2002/07/02  daouda
-
-	* my_gtk.pm: 
-	  - fill a combo by default :
-	gtkcombo_setpopdown_strings($combo_widget,@strings)
-
-2002/07/02  gbeauchesne
-
-	* c/smp.c: 
-	  - TODO: Update ia64 check with /proc/pal/cpuX ?
-	  - TODO: Update x86_64 check when SMP machines are actually available
-	  - Conditionalize compilation of main() with TEST macro
-
-2002/07/02  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: try harder to find the full list of servers available,
-	using "smbclient -L" to
-	check the workgroup masters
-
-2002/07/01  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm (raw_hd_mount_point): nicer default mount point
-
-2002/06/28  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, network/smb.pm, network/smbnfs.pm: 
-	  - add authentification in diskdrake --smb (esp. for windows NT)
-	  - use "credentials=" to put the passwords
-	(ideas and investigations from Stew Benedict,
-	integrated by Pixel, but need testing)
-	Known bug: if you want to change the password when there are 2 entries
-	in fstab
-	  using the same username=/password=, writing the credentials is done in
-	random order,
-	  => you've got one chance in 2 that the password is changed :-(
-
-	* fs.pm: 
-	  - add authentification in diskdrake --smb (esp. for windows NT)
-	  - use "credentials=" to put the passwords
-	(ideas and investigations from Stew Benedict,
-	integrated by Pixel, but need testing)
-	Known bug: if you want to change the password when there are 2 entries
-	in fstab
-	  using the same username=/password=, writing the credentials is done in
-	random order,
-	  => you've got one chance in 2 that the password is changed :-(
-	handle spaces in mount points and devices (using \040)
-
-2002/06/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ, standalone/icons/drakTS.620x57.png: Add
-	drakTermServ application and icon.
-
-2002/06/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm: ensure
-	licence step is asked in any case (ie. even when selectLanguage is
-	automatic)
-
-	* any.pm: "my" variables where needed
-
-2002/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po, share/po/ar.po: Updated po files
-
-2002/06/19  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Makefile: corrected rules to make distributable rpms.
-
-2002/06/19  François Pons  <fpons@mandrakesoft.com>
-
-	* patch/patch-oem-hp.pl: added patch-oem.pl file used to generate HP
-	Mandrake Linux 8.2.
-
-2002/06/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: remove a few drivers so that hd.img and network.img are
-	possible with latest BOOT kernel
-
-2002/06/19  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: use "wide links = no" for exporting via samba
-	(thanks to Jan Schäfer)
-
-	* fs.pm: mounting of ntfs after install really mount the partition (thanks
-	to Buchan Milne)
-
-2002/06/18  daouda
-
-	* my_gtk.pm: 
-	  - add gtkset_text, gtkprepend_text, gtkappend_text for entry widgets
-
-2002/06/18  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Makefile.drakxtools: manage security subdir.
-
-	* Makefile: added targets to build test and distribution rpms and srpms
-	(localrpm,
-	localsrpm, rpm, srpm).
-	added security to the installed directories
-
-	* pam.net_monitor, diskdrake/diskdrake.html, drakxtools.spec,
-	apps.net_monitor: ripped from the srpm
-
-2002/06/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2002/06/17  cbelisle
-
-	* standalone/draksec: added server, user and network advanced options
-
-	* any.pm: draksec: customize entries for each options (lists, checkboxes
-	and text boxes)
-	Added user,server and network advanced options
-
-	* security/msec.pm: 
-	  - Customize entries for each options (checkboxes, text boxes and
-	lists)
-	added network, server and user advanced options
-
-2002/06/15  alus
-
-	* share/po/pl.po: updates
-
-2002/06/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Catalan doesn't have French fallback anymore
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/06/11  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: added /tmp in @suggestions_mntpoints (as suggested by
-	Philippe Coulon)
-
-2002/06/10  cbelisle
-
-	* standalone/draksec: Add an entry for the security user email
-
-	* security/msec.pm: Initial commit
-
-	* any.pm: Add security user email entry in draksec
-
-2002/06/10  daouda
-
-	* network/tools.pm: 
-	  - choose country according to timezone.
-
-2002/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/syncrpms: english fix
-
-2002/06/10  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: s/class/class_/ for ldetect 0.4
-
-2002/06/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* timezone.pm: remove duplicate entry in ntp_servers
-
-	* interactive_gtk.pm, my_gtk.pm: split ask_browse_tree_info from
-	interactive_gtk
-	to my_gtk between widgets creation and real
-	stuff so that we can now call it with widgets
-	places differently
-
-2002/06/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated po file
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: adapt to new lilo
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-	* bootloader.pm: adapt to new lilo
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
-	install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
-	fixes thx to vincent meyer
-
-2002/06/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
-	instead of weird style
-	with clearall unset & auto_allocate set
-
-2002/05/29  alus
-
-	* share/po/pl.po: little fixes
-
-2002/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm: remove typo fix when it's not a fix :-)
-	small typo
-	remove typo (hopefully really a typo ;p)
-
-	* any.pm: be a bit more polite
-
-2002/05/27  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: make sure patch is always read after defcfg to take
-	precedance.
-
-2002/05/27  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15  alus
-
-	* share/po/Changelog: info about polish translation
-
-2002/05/14  alus
-
-	* share/po/pl.po: polish finished
-	updated polish translation
-	polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13  alus
-
-	* share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libbzip2* and more explanations about failing compilation
-
-	* mdk-stage1/Makefile, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/probing.c:
-	adapt to gcc-3.1
-
-2002/05/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
-	* share/po/eu.po: small corrections
-
-2002/04/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: support USB2 controllers as
-	well
-
-2002/04/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed some machine with two present i830 CGC but only
-	one in reality.
-
-	* detect_devices.pm: updated usbMice to take care of device declared as
-	Mouse:USB in usbtable (was
-	not the case !)
-
-2002/04/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootlook.pm: a few english fixes
-
-	* any.pm: fixes
-	english fixes from v meyer
-	a few english fixes thx to vincent meyer
-
-2002/04/19  alus
-
-	* share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-	* share/po/hu.po: updated po file
-
-2002/04/18  alus
-
-	* share/po/pl.po: 3 more long messages
-	one entry
-	stil working....
-
-2002/04/17  alus
-
-	* share/po/pl.po: Mostly finished polish translation
-	translations, fixes etc...
-
-2002/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: final candidate.
-
-	* rescue/tree/etc/oem: final candidate.
-	add gcc-cpp to oem install.
-
-2002/04/16  alus
-
-	* share/po/pl.po: still working
-	Few fixes
-	Updated translation. Many strings is not yet translated...
-
-2002/04/16  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: sync with oem-prepare
-	fixed stupid error.
-	forget packdrake module invocation.
-	fixed to support non standard rpm filename.
-
-	* tools/oem-prepare: add gcc-cpp to always installed.
-	disable unselection of some package (gmc, all gcc3.0 stuff).
-
-2002/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: only main version of automake
-
-2002/04/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated po file
-
-2002/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
-	dialog box
-
-2002/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: Another small fix
-	Small corrections
-
-2002/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/mt.po: updated Maltese file
-
-2002/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: small typo correction
-
-2002/04/10  warly
-
-	* share/rpmsrate: autofs -> 2
-
-2002/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
-	and iptables
-	packages conflict
-
-2002/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm, partition_table_gpt.pm,
-	partition_table_empty.pm, partition_table_bsd.pm,
-	partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
-	error message (thanks to Brian J. Murrell)
-
-2002/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed a bunch of things
-
-	* install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
-	partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
-	printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
-	network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
-	network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
-	strings
-
-2002/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
-	drakfloppy strings
-
-2002/04/07  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakfloppy: moving from his own rpm to drakxtools
-
-	* Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  sdupont
-
-	* standalone/drakbackup: please yduret, do not commit these changes on cvs
-	before to test it.
-	you can say "bugs fixes" only if you have corrected  some errors but not
-	if you create it!
-	the backup on cd was disabled because the backend is not available for
-	moment.
-
-	* standalone/drakfont: remove uninteresting yduret changes,
-	would it be possible to know what are your "bugs fixies" ?
-	to yduret: I'm the creator of this program so please do not remove my
-	changes.
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
-	install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
-	fixes thx to vincent meyer
-
-2002/06/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
-	instead of weird style
-	with clearall unset & auto_allocate set
-
-2002/05/29  alus
-
-	* share/po/pl.po: little fixes
-
-2002/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm: remove typo fix when it's not a fix :-)
-	small typo
-	remove typo (hopefully really a typo ;p)
-
-	* any.pm: be a bit more polite
-
-2002/05/27  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: make sure patch is always read after defcfg to take
-	precedance.
-
-2002/05/27  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15  alus
-
-	* share/po/Changelog: info about polish translation
-
-2002/05/14  alus
-
-	* share/po/pl.po: polish finished
-	updated polish translation
-	polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13  alus
-
-	* share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libbzip2* and more explanations about failing compilation
-
-	* mdk-stage1/Makefile, mdk-stage1/probing.c: adapt to gcc-3.1
-
-2002/05/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
-	* share/po/eu.po: small corrections
-
-2002/04/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed some machine with two present i830 CGC but only
-	one in reality.
-
-	* detect_devices.pm: updated usbMice to take care of device declared as
-	Mouse:USB in usbtable (was
-	not the case !)
-
-2002/04/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootlook.pm: a few english fixes
-
-	* any.pm: fixes
-	english fixes from v meyer
-	a few english fixes thx to vincent meyer
-
-2002/04/19  alus
-
-	* share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-	* share/po/hu.po: updated po file
-
-2002/04/18  alus
-
-	* share/po/pl.po: 3 more long messages
-	one entry
-	stil working....
-
-2002/04/17  alus
-
-	* share/po/pl.po: Mostly finished polish translation
-	translations, fixes etc...
-
-2002/04/16  alus
-
-	* share/po/pl.po: still working
-	Few fixes
-	Updated translation. Many strings is not yet translated...
-
-2002/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: only main version of automake
-
-2002/04/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated po file
-
-2002/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
-	dialog box
-
-2002/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: Another small fix
-	Small corrections
-
-2002/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/mt.po: updated Maltese file
-
-2002/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: small typo correction
-
-2002/04/10  warly
-
-	* share/rpmsrate: autofs -> 2
-
-2002/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
-	and iptables
-	packages conflict
-
-2002/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm, partition_table_gpt.pm,
-	partition_table_empty.pm, partition_table_bsd.pm,
-	partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
-	error message (thanks to Brian J. Murrell)
-
-2002/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed a bunch of things
-
-	* install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
-	partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
-	printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
-	network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
-	network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
-	strings
-
-2002/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
-	drakfloppy strings
-
-2002/04/07  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakfloppy: moving from his own rpm to drakxtools
-
-	* Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  sdupont
-
-	* standalone/drakbackup: please yduret, do not commit these changes on cvs
-	before to test it.
-	you can say "bugs fixes" only if you have corrected  some errors but not
-	if you create it!
-	the backup on cd was disabled because the backend is not available for
-	moment.
-
-	* standalone/drakfont: remove uninteresting yduret changes,
-	would it be possible to know what are your "bugs fixies" ?
-	to yduret: I'm the creator of this program so please do not remove my
-	changes.
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
-	doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
-	doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: do not have "root=" with no root (needed for memtest)
-	(thanks to Borsenkow Andrej)
-
-	* share/rpmsrate: add tmpwatch (since it is not mandatory any more)
-
-2002/03/30  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakfont: bugs fixes, code clean up,
-	more mdkish..
-
-2002/03/26  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Fixed several problems related to HP
-	multi-function devices:
-	  - Parallel multi-function devices worked only on the first (onboard)
-	parallel
-	port.
-	  - HP LaserJet 2200 needs HPOJ for printing via USB.
-	  - For the HP OfficeJet D series the scanning instructions were not
-	shown.
-	  - HPOJ does not work with HP PhotoSmart 10xx, 11xx, and 12xx.
-
-2002/03/22  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: cleaned gtkpowerpack
-
-2002/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: use /root rather than /tmp for some temp files (security
-	suxx)
-
-2002/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list: rpm 4.0.4
-
-	* mdk-stage1/network.c: don't save DHCP_HOSTNAME if the value is void
-
-2002/03/20  sdupont
-
-	* standalone/drakfont: fixing problems
-	exchanging: ttmkfdir by  /usr/X11R6/bin/mkttfdir
-	which generate correct fonts.dir
-
-	* standalone/drakbackup: remove backup on cd
-
-2002/03/20  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: use log for what is not related to explanations
-
-2002/03/19  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/updatehdlist: take care of commercial medium (not syncable).
-
-2002/03/19  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: 
-	  - default tv norm is pal rather than ntsc (because of alphabetical
-	sort) since it's the most used tv norm
-	  - figure out tv norm & country (aka frequency table) from locales
-	
-	  - add a hash based on lang in order to do this
-	
-	  - add --no-guess if one doesn't want drakxtv to automagically guess tv
-	  norm and geographic area through locales (lang.pm)
-	
-	  - log with standalone::explanations:
-	
-		 - guessed values from locales: language, tv norm and country
-	
-		 - runned command to scan for tv channels
-	
-	  	 - ~/.xawtv creation
-	
-	
-	  - s/bcast/broadcast/ in displayed messages
-	
-	  - add -h and --help support
-
-2002/03/18  dam's  <damien@mandrakesoft.com>
-
-	* install_gtk.pm, mouse.pm, my_gtk.pm: corrected create_xpm API
-
-2002/03/18  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed to support rpm filename incoherent to standard
-	naming for commercial
-	packages (commercial are *really* shit (almost, for the hope) all the
-	time ?)
-
-2002/03/16  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
-	connection.
-
-2002/03/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/ar.po: updated po file
-
-2002/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/16  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
-	connection.
-
-2002/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/15  fabman
-
-	* share/po/es.po: updated bad lilo/grub/yaboot translation
-	updated spanish translations
-
-2002/03/15  François Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: force mkinitrd *really* for bootsplash.
-	force initrd regeneration for oem on some case (maybe the cause of
-	bootsplash
-	perturbation, as maintainer don't even known why it is running correctly
-	:-)
-
-	* pkgs.pm: do not try to get synthesis if hdlist is available as an handle
-	on file (typical
-	for updates).
-
-	* share/rpmsrate: remove doublon on NVIDIA_nforce.
-	update to 6mdk for NVIDIA_nforce*
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: yet again add some dropped entities from drakx-help.xml
-	add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
-
-	* install_steps_interactive.pm: 
-	  - remove obsolete code
-	  - the result is to use directly $availableC instead $size2install
-	which was min($availableC, $max_size)
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: do not try to get synthesis if hdlist is available as an handle
-	on file (typical
-	for updates).
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: yet again add some dropped entities from drakx-help.xml
-	add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
-	s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
-	drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
-	drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po: updated po file
-
-2002/03/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakxtv: english
-
-2002/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/da.po, share/po/no.po: updated po files
-
-	* share/po/eu.po: updated po file
-
-	* lang.pm: changed LANGUAGE for basque
-
-	* share/po/ja.po: added \n in advertising
-
-2002/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: CHARSET"iso-8859-1" and CHARSET"iso-8859-15" is no good
-	for english which has CHARSET"C", adding it
-
-	* share/rpmsrate.server: obsolete
-
-2002/03/14  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: 
-	  - add SECAM to france description to ease user comprehension
-	  - remove unused variables
-	  - revert gc & dam's (also known as the usual suckers) garbage
-	  who'ven't the hardware to test:
-	
-		- explain in source why we don't try to install xawtv (see below)
-	
-		- just display a message if xawtv isn't installed
-		  since drakx should have installed it
-	
-		- let it be runned as root again (how many times i'm
-		  supposed to restore this behaviour)
-	
-		- retest with a tv card
-	
-	  - use %ENV rather than relying on shell ~ expansion
-	
-	  - if tv card wasn't detected, ask the user to spam us
-	
-	  - factorize $in->exit() out of scan4tvchannels()
-	
-	  - add to TODO list the possibility to install xawtv if needed
-	
-	  - check scantv return value and display an error message
-	
-	  - also if the wrapper was runned on console, display a nice
-	  message saying one can now run xawtv under X11
-
-2002/03/14  warly
-
-	* share/rpmsrate: add commercial apps
-
-2002/03/14  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/logdrake: fix some bug
-	fix * bug in field matching/ not matching
-
-2002/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/03/13  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: sync with oem (removed mach32 server).
-	sync with oem.
-	remove bzflag.
-	synced with oem script.
-
-	* rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
-	remove Mach8 and Mono driver for oem only.
-	remove bzflag.
-	fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-2002/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/03/13  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: sync with oem (removed mach32 server).
-	sync with oem.
-	remove bzflag.
-	synced with oem script.
-
-	* rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
-	remove Mach8 and Mono driver for oem only.
-	remove bzflag.
-	fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-2002/03/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/eu.po: updated po files
-
-2002/03/13  warly
-
-	* share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/13  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-	* tools/oem-prepare: synced with oem script.
-
-2002/03/13  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add openoffice with weight = 2
-
-2002/03/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/vi.po, share/po/cs.po, share/po/hu.po,
-	share/po/eu.po: updated po files
-
-	* lang.pm: small console font changes
-	set default console fotns for latin1/0 to lat1-16 and lat0-16;
-	the font lat0-sun16 is missing some chars of iso-8859-1/15 !
-
-2002/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: add gcc and gcc-c++ in @preferred
-
-2002/03/13  warly
-
-	* share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/12  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: onboot option only in expert mode
-	corrected domainname bug; added onboot option
-
-2002/03/12  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakfont: minor bug correction
-
-	* standalone/net_monitor: greater timeout
-
-	* network/tools.pm, network/netconnect.pm: changed timeout for testing
-	internet connection
-
-2002/03/12  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: remove synthesis if not found (filesize is 0)
-
-	* Xconfigurator.pm: avoid Utah GLX only if > 800MB, not if <= 800MB (!)
-
-	* install_any.pm: added fix to support update hdlist renaming (ie hdlist
-	of update are always hdlist.cz).
-	remove old synthesis file, to make sure gzip can build a new one.
-
-	* share/rpmsrate: added nforce support (hack by adding kernel version
-	inside)
-
-2002/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/ga.po: fixed email address
-
-	* share/po/zh_TW.po: updated po file
-
-2002/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, bootloader.pm: don't have "quiet" boot in the server
-	meta_class
-
-	* pkgs.pm: "fam" is not a naughtyServers
-	remove the old "boa" comment
-	adapt naughtyServers for 8.2
-
-2002/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few missing translations
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt.po, share/po/ga.po, share/po/de.po, share/po/az.po,
-	share/po/pt_BR.po, share/po/nl.po, share/po/ja.po, share/po/id.po,
-	share/po/ar.po, share/po/mt.po, share/po/eo.po, share/po/da.po: updated
-	po files
-
-	* share/po/eu.po, share/po/it.po: updated po files
-	merged with new strings from manuals
-
-	* share/po/DrakX.pot, share/po/fr.po: merged with new strings from manuals
-
-	* share/po/be.po, share/po/bg.po, share/po/et.po, share/po/hr.po,
-	share/po/ko.po, share/po/is.po, share/po/pl.po, share/po/no.po,
-	share/po/fi.po, share/po/el.po, share/po/lt.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/bs.po,
-	share/po/cs.po, share/po/af.po: updated po files (finished merging with
-	manual strings)
-	updated po files
-
-	* share/po/hu.po: updated po files
-	updated po files
-
-	* share/po/cy.po: updated po file
-	updated po files
-
-	* share/po/es.po: updated Spanish
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/sr.po, share/po/tr.po,
-	share/po/ru.po, share/po/wa.po, share/po/sv.po, share/po/th.po,
-	share/po/sk.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
-	share/po/ro.po, share/po/zh_TW.po: updated po files (finished merging
-	with manual strings)
-
-2002/03/11  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.config: added drakproxy
-
-	* standalone/drakxtv: added embedded mode
-
-2002/03/11  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: for updates, make tree as flat instead in order to
-	see all packages.
-
-2002/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: webmin: 3
-
-	* standalone/drakxtv: 
-	  - install xawtv when necessary instead of
-	telling people to use urpmi (titi sucks)
-	  - prints out a message when no tv card
-	has been detected
-
-	* share/po/fr.po: small ortograf
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/it.po, share/po/eu.po: merged with new strings
-	from manuals
-
-	* share/po/DrakX.pot: merged with new strings from manuals
-	updated GErman file
-
-	* share/po/de.po: updated GErman file
-
-	* share/po/es.po: updated Spanish
-
-2002/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (fullname2mouse): workaround when "1 Button" is not found
-
-	* install_steps.pm, install2.pm: 
-	  - default security level now set in miscellaneousBefore
-	  - default security level is 3 in meta_class server
-
-	* install_any.pm: 
-	  - fix the setting of compssUsersChoices in auto_install when it is
-	empty
-	  - set the default compssUsersChoices adapted to the server meta_class
-
-	* share/rpmsrate: remove phpgroupware from OFFICE (since it appeas twice,
-	the rate is 4, and it requires apache, and ...)
-
-	* Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
-	* install_steps_gtk.pm: 
-	  - remove the hack for not displaying Utilities in classic meta_class
-	  - new compssUsers groups for the server meta_class
-
-	* share/compssUsers: remove "Utilities" here instead of removing it
-	hackily in install_steps_gtk
-
-	* share/compssUsers.server: fix the path=Utilities for the Utilities
-	section
-
-2002/03/11  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Small text fix.
-	Security fix: Give a warning that SMB passwords can easily be revealed
-	by normal users when printing on a Windows-hosted printer is set up.
-
-	* detect_devices.pm: Reverted parts of the last change, they broke in
-	non-DevFS environments (e. g. during installation).
-
-2002/03/11  warly
-
-	* share/rpmsrate: add bwbserver_linux in rpmsate for BeeWeb server
-
-	* share/compssUsers.server: remove ICEWM choice
-
-2002/03/11  Yves Duret <yduret@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: added yduret entry in user.
-
-2002/03/11  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: add Rage Mobility as bad card for XF4 (was already bad
-	card for XF3) (gégé report).
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/de.po, share/po/DrakX.pot: updated GErman file
-
-2002/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm (Mount_point): when files exist in the chosen
-	mount point, propose migration
-
-	* install_steps_interactive.pm: search /commercial/i instead of
-	/Application/ before showing the commercial license
-
-	* standalone/drakboot, bootloader.pm: fix Stew sucks
-
-	* install2.pm, install_steps.pm: 
-	  - default security level now set in miscellaneousBefore
-	  - default security level is 3 in meta_class server
-
-	* install_steps_gtk.pm: 
-	  - remove the hack for not displaying Utilities in classic meta_class
-	  - new compssUsers groups for the server meta_class
-	search /commercial/i instead of /Application/ before showing the
-	commercial license
-
-	* install_any.pm: 
-	  - fix the setting of compssUsersChoices in auto_install when it is
-	empty
-	  - set the default compssUsersChoices adapted to the server meta_class
-
-	* Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
-	* share/compssUsers: remove "Utilities" here instead of removing it
-	hackily in install_steps_gtk
-
-	* share/compssUsers.server: fix the path=Utilities for the Utilities
-	section
-
-2002/03/11  yduret
-
-	* standalone/scannerdrake: re-re-re-re-re-re-uncomment the pkgs check
-	line.
-
-2002/03/10  chipaux
-
-	* share/po/fr.po: Corrected few typo mistakes.
-
-2002/03/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: gcize damienization
-
-	* share/rpmsrate: put userdrake together with drakconf so that
-	userdrake is not missing (till)
-
-2002/03/10  siegel
-
-	* share/po/help_xml2pm.pl: added tag filename
-
-	* any.pm: added missing i18n _()
-
-	* share/po/de.po: update
-	and still fixes ...
-	updates
-	update
-
-2002/03/10  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Protect the Star Office/OpenOffice.org configuration against
-	manual changing of the "update-alternatives" assignment of the "lpr"
-	command.
-
-	* detect_devices.pm: Made USB printer auto-detection more stable and
-	reliable.
-
-2002/03/10  yduret
-
-	* standalone/scannerdrake: added ASK DEVICE support
-
-	* scanner.pm: added ASK support for more interactiveness during
-	configuration
-
-2002/03/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: comply better to ClientID stuff
-
-2002/03/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated po file
-
-2002/03/09  yduret
-
-	* standalone/scannerdrake: added sum up at the end
-	uncomment line that checks if sane rpm is installed or not (thx gc).
-	i sux,
-
-2002/03/08  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakproxy: drakproxy rewritten
-	working drakproxy
-
-	* install_steps.pm: corrected network up/down when network install
-
-	* standalone/drakfont: ergonomy changed to fit in mcc
-	corrected network up/down when network install
-
-	* network/network.pm: proxy settings corrected
-
-2002/03/08  fabman
-
-	* share/po/es.po: updated spanish translation
-
-2002/03/08  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed allowNVIDIA_rpms to take care of new kernel naming
-	conventions.
-
-	* standalone/XFdrake: fixed NVIDIA support to use newer kernel naming
-	conventions.
-
-	* Xconfigurator.pm: fixed possible additional XFree packages not installed
-	if server is already
-	installed.
-
-2002/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: missing translations + a few changes
-
-	* mdk-stage1/probing.c: have 4 seconds of delay for usb stuff
-	to show up rather than seconds
-
-2002/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/it.po: updated po files
-
-	* share/po/es.po: corrected typo
-
-	* share/po/da.po: updated Danish file
-
-	* lang.pm, share/locales-skeleton.tar.bz2: Added symlinks in
-	locales-skeleton so non primary chinese encodings
-	can work
-
-	* share/po/ar.po: updated po file
-
-	* share/po/cy.po: removed the "translation" of licence, it was random
-	text.
-
-2002/03/07  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po, modparm.pm: corrected
-
-2002/03/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/newt-frontend.c: english fix thx to till & phil
-
-2002/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated po file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2002/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: removing quota choices for reiserfs
-
-2002/03/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: make gc happy
-
-	* modparm.pm, share/po/fr.po: corrected
-
-	* standalone/draknet: corrected network/internet restart when already
-	connected
-
-	* network/netconnect.pm: corrected bad previous behaviour
-
-	* standalone/drakfont: corrected bad system command
-
-	* share/advertising/02-internet_icon.png,
-	share/advertising/05-contcenter_icon.png,
-	share/advertising/10-MDKexpert_icon.png, share/advertising/06-user.pl,
-	share/advertising/08-games.pl, share/advertising/02-internet.pl,
-	share/advertising/03-graphic_icon.png, share/advertising/07-server.pl,
-	share/advertising/12-MDKstore_icon.png,
-	share/advertising/06-user_icon.png,
-	share/advertising/07-server_icon.png, share/advertising/09-MDKcampus.pl,
-	share/advertising/10-MDKexpert.pl, share/advertising/05-contcenter.pl,
-	share/advertising/04-develop.pl,
-	share/advertising/09-MDKcampus_icon.png,
-	share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
-	share/advertising/04-develop_icon.png,
-	share/advertising/08-games_icon.png: changed icon sizes
-
-2002/03/07  fcrozat
-
-	* share/rpmsrate: Evolution is not dependent on GNOME selection (not
-	require gnome-core)
-
-2002/03/07  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: avoid destroying some files in /etc.
-
-	* install_steps_interactive.pm: fixed package tree with a given medium.
-
-	* any.pm: fix autologin sometimes activated without user intervention.
-
-2002/03/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: generate_automatic_stage1_params: also save
-	the interface number in case the machine will
-	have several interfaces; clean code a bit
-
-	* mdk-stage1/network.c: better error msg regarding pcmcia net
-	adapters supported either with pcmcia.img
-	or network.img (amaury sucks)
-
-	* install_steps_auto_install.pm: in replay mode, since
-	$o->{interactiveSteps}
-	exists, we can't simply ||= @graphical_steps,
-	we need to push to ensure that the
-	@graphical_steps is always honoured
-
-	* standalone/drakgw: 
-	  - call net_monitor to disable internet
-	connection before network-restart
-	  - user return value when status'ing the
-	  initscripts rather than grepping their
-	  text output
-
-	* modules.pm: try to avoid segfaulting probeall stuff
-	add ns83820 gigabit (goes to other.img)
-
-	* rescue/rescue-doc: english fixes thx to phil
-
-2002/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* standalone/drakfont: Added a missing _( ) around a text
-
-	* share/po/vi.po, share/po/cy.po, share/po/hu.po, share/po/id.po: updated
-	po files
-
-	* share/po/ko.po, share/po/ca.po, share/po/tr.po: commented out the
-	translations using argument switching (not yet handled by DrakX)
-
-	* bootlook.pm, standalone/drakboot: i18n changes
-
-	* keyboard.pm: corrected the locale->keyboard list building
-	make keyboard selection choose first the 5 first chars of lang;
-	then the 2 first chars;
-
-	* share/po/eu.po: commented out the translations using argument switching
-	(not yet handled by DrakX)
-	updated po file
-
-2002/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix fileshare custom config
-	fix *some* stew errors
-
-	* bootloader.pm: "--timeout=" must be after terminal
-	add --timeout=... for "terminal serial ..." line in grub's menu.lst
-	fix *some* stew errors
-
-	* install_any.pm: don't have the adsl & modem passwords in report.bug
-
-	* detect_devices.pm (zips__faking_ide_scsi): fix returned value in
-	standalone
-	(getSCSI): don't call isFloppyOrHD for ZIPs (lowers the number of kernel
-	error when there is no floppy)
-
-	* fs.pm: removing quota choices for reiserfs
-
-2002/03/07  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* any.pm, bootlook.pm, standalone/drakboot, bootloader.pm: drakboot
-	functionality for PPC
-
-2002/03/07  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of network not being started by Printerdrake
-	during installation.
-
-2002/03/07  warly
-
-	* share/compssUsers.server, share/compssUsers, share/rpmsrate: update
-	server, merge with normal rpmsrate
-
-2002/03/06  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/no.po, share/po/cy.po: updated po file
-
-2002/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset (nfs_exports::update_server): ensure portmap is
-	running
-
-2002/03/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected font stuff
-
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: no 3D with Utah GLX (XF 3.3) if more than 800 MB.
-
-	* pkgs.pm: fixed error when using multiple removable media and user
-	aborted installation
-	(for some other error) and hdlists cannot be retrieved.
-	add save of synthesis too when partitions are reformated, so that urpmi
-	is happy after.
-	fixed when hdlist gives no new package (new name) but only obsoleted
-	package or
-	updated package, ie security updates may appreciate.
-
-	* install_any.pm: update for newer pkgs module (fix for abort during
-	installation).
-
-	* rescue/tree/etc/oem: allow oem script to be executable from standard cd
-	set (powerpack or other).
-
-2002/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po: updated po file
-	updated pot file
-
-	* share/po/fr.po, share/po/cy.po, share/po/id.po, share/po/zh_TW.po:
-	updated pot file
-	updated some po files
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2002/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: add @preferred libxpm4
-
-	* lang.pm: fix typo in %xim (for chineese)
-	  - create the kde share/config's directory, so that kde config files
-	are created in any case
-	  - in user_only localedrake, ensure the /etc/sysconfig/i18n is taken
-	into account when ~/.i18n doesn't exist (thanks to F.Crozat)
-
-	* install_any.pm: ensure the fstab is kept on upgrade
-	(g_auto_install): use "interactiveSteps" field instead of pushing in
-	@install_steps_auto_install::graphical_steps
-
-	* standalone/localedrake: when called by kcontrol with --apply, don't
-	modify kde config files, kcontrol takes care of it more nicely
-
-	* diskdrake/interactive.pm: translate the actions
-	choose to activate crypto. type password. unselect encryption. Select
-	encryption again, you were not asked for password. Fixed
-	use formatError
-
-	* bootloader.pm (add_append): don't add to entries of type 'other'
-
-	* devices.pm (find_free_loop): fix
-
-	* install_steps_interactive.pm, install_steps.pm: ensure the fstab is kept
-	on upgrade
-
-	* fsedit.pm: do not allow encrypted /var
-
-2002/03/06  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: print an error message if xawtv isn't installed
-	fix conflict between i18n and complete signal handler (ie return key
-	and not value)
-
-2002/03/06  warly
-
-	* share/rpmsrate: remove abiword
-
-2002/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/probe.c: an old sucking PCI card needs oldskool
-	i82365 :-((, ugly patch
-
-2002/03/05  warly
-
-	* share/rpmsrate: add Fred Bastok modif
-	remove too many duplicate in i18n packages that are now automatically
-	added
-
-2002/03/05  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* modules.pm: Add USB2 controller
-
-2002/03/05  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected expert option in install mode
-	added expert mode
-
-	* my_gtk.pm: greater interstice
-
-	* modparm.pm: cosmetic
-	gzipped modules handled
-
-2002/03/05  fcrozat
-
-	* share/rpmsrate: Install xlockmore when installing gnome, since
-	xscreensaver can't lock
-	root desktop..
-
-2002/03/05  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivate v4l module if DRI is enabled and r128
-	driver used.
-
-	* install_steps.pm: added auto restore of some files (/etc/profile) needed
-	by upgrade (from .rpmnew).
-	added log for hasNetwork (so that we can understand why installUpdates
-	do nothing).
-
-	* crypto.pm: avoid trying to find hdlist-updates.cz in existing medium
-	(instead of ftp one).
-
-	* fs.pm: fixed hd install to allow using specific directory.
-
-	* install_any.pm: fix duplicate synthesis.hdlist.xxx file present in
-	/var/lib/urpmi, and
-	furthermore uncompressed :-(
-	fixed possible bug when generating synthesis file for urpmi
-	installation.
-
-2002/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c, mdk-stage1/dhcp.h, mdk-stage1/network.c: save
-	dhcp_hostname for stage2
-
-	* install_any.pm: fix bug in generating automatic stage1
-	params for http
-
-	* modules.pm: aironet core sucking thing
-
-2002/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po: updated po files
-
-2002/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: if mem=nopentium is given on cmdline, have it after
-	install
-
-	* modules.pm (extract_modules): created (was done in load_raw)
-
-2002/03/05  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator.pm: use UseFBDev for r128 - PPC
-
-2002/03/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added support for HP's newest MF devices: HP OfficeJet
-	D series, HP LaserJet 33xx MFP.
-	Fixed bug of printerdrake sometimes assuming the user has an MF device
-	when he has typed the device file name in the expert mode.
-
-2002/03/05  yduret
-
-	* bootlook.pm: fix nobody bug
-
-	* standalone/logdrake: mail alert: use eval {} to catch wizcancel
-
-2002/03/04  dam's  <damien@mandrakesoft.com>
-
-	* modparm.pm: corected weirdness, I suck
-
-2002/03/04  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fix scroll total to match reality.
-	fixed interpretation of size of package when doing an install (this can
-	be
-	severe, need testing).
-
-2002/03/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cy.po, share/po/id.po: updated po file
-
-2002/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (gtkicons_labels_widget): since style is not set either, use
-	the widget and ask it the style->font. This *works*
-	(gtkicons_labels_widget): pass the style instead of directly passing the
-	font
-
-2002/03/03  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Let Star Office/OpenOffice.org configuration corrcet a bug
-	in the PostScript produced by these programs so that the Euro symbol is
-	printed correctly.
-
-2002/03/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated po file
-
-2002/03/02  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: better name for windobe new 0x42 special id (their
-	own LVM marker)
-
-	* detect_devices.pm: better jaz detection (thanks to Randy Welch)
-
-2002/03/02  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/da.po, share/po/vi.po, share/po/hu.po: updated
-	po files
-
-	* share/po/tr.po: updated po file
-
-2002/03/02  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: add lvreduce & lvextend
-
-	* detect_devices.pm: fix ide zip name when there are already some other
-	SCSI drives
-	ZIPs and Jazz's are not floppies
-
-	* diskdrake/interactive.pm (Resize): ensure we call lv_resize from lvm and
-	adjust_* for normal partitions, even for destructive resizes
-
-2002/03/02  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix gc's bulshit
-
-2002/03/01  dam's  <damien@mandrakesoft.com>
-
-	* services.pm: corrected translation used for shell command
-
-	* my_gtk.pm: style & font correction
-
-2002/03/01  François Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
-	* rescue/tree/etc/oem: added ext3 support.
-
-	* share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
-	* install_any.pm: reset correct setup_postinstall_rpms calling.
-	removed some card where 3D is not installed by default:
-	Riva128, Radeon 8500 and Rage Mobility card.
-	removed staling debug code.
-	fixed bad copied package (if one is not found).
-
-	* tools/oem-prepare: added handling of newer rpmsrate format with INSTALL
-	category.
-
-	* pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
-	handling.
-	only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few missing trads
-	please translators, keep two newlines when
-	there are two newlines in original string,
-	it's on purpose
-
-2002/03/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated po files
-
-	* share/po/fr.po: fixed two typos
-	small corrections (non breakable spaces)
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
-	Xdrakres completly obsolete)
-
-	* standalone/localedrake: restrict localedrake to installed lang
-
-	* lang.pm: restrict localedrake to installed lang
-	add 'C' in %charset2kde_font (so that english has normal fonts)
-
-	* bootloader.pm: 
-	  - do not indent "disk=... bios=..."
-	  - $lilo->{first_hd_device} can be used to tell which drive is the
-	first one
-	for the BIOS. Useful when the bootloader is installed on a partition and
-	not
-	on the MBR.
-	read "disk=/dev/xxx bios=0x8x" and save it
-
-	* any.pm: restrict localedrake to installed lang
-	ask which hard drive is the booting one when there is mixed kind of
-	drives
-	(scsi+ide, ide2+ide) and the bootloader is not installed on MBR
-
-2002/03/01  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Reduced the paths to search for Star/Open Office, on systems
-	without these applications installed the search needed a significant
-	time.
-
-2002/03/01  François Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
-	* share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
-	* install_any.pm: removed staling debug code.
-	fixed bad copied package (if one is not found).
-
-	* pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
-	handling.
-	only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: add hostname/domain in dhcp negociation,
-	thx to david@eastcott.net
-
-	* share/po/fr.po: please translators, keep two newlines when
-	there are two newlines in original string,
-	it's on purpose
-
-2002/03/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/zh_TW.po, share/po/hu.po: updated po files
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
-	Xdrakres completly obsolete)
-
-	* detect_devices.pm: add is_a_recent_computer()
-
-	* any.pm: call dcop as user
-
-	* lang.pm: add 'C' in %charset2kde_font (so that english has normal fonts)
-	switch en_GB, *_CH, da, es@tradicional and wa to iso-8859-15
-
-	* bootloader.pm: read "disk=/dev/xxx bios=0x8x" and save it
-
-	* mouse.pm: special case for non detected usb interface on a box with no
-	mouse.
-	we *must* find out if there really is no usb, otherwise the box may
-	not be accessible via the keyboard (if the keyboard is USB)
-	the only way to know this is to make a full pci probe
-
-2002/02/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: bugfixs
-	corrected translation for crontab
-
-	* modparm.pm: corrected modinfo path for isa modules during install
-
-2002/02/28  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: try to fix if no chosen width has been found.
-	removed Radeon 8500 from DRI capable cards.
-
-	* rescue/tree/etc/oem: added curl as a bonus for oem install (it will be
-	used by urpmi)
-	added a2ps as a bonus (it fetch tetex where oem limited disk usage do
-	not agree
-	a lot).
-	fixed bad copy of install packages.
-
-	* tools/oem-prepare: added curl as a bonus for oem install (it will be
-	used by urpmi)
-	added a2ps as a bonus (it fetch tetex where oem limited disk usage do
-	not agree
-	a lot).
-	fixed bad copy of INSTALL packages.
-
-2002/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: more precise msg when can't access kernel modules because
-	we still have many dumb people on cooker asking what's going on
-
-	* install_steps_interactive.pm: small english fix
-
-2002/02/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/de.po, share/po/no.po: updated po files
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-	* share/po/sv.po: updated Swedish file
-	updated pot file
-
-2002/02/28  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
-	"no" could be either "no-dvorak" or "no-latin1")
-
-	* keyboard.pm (loadkeys_files): ensure each file appear only once
-
-2002/02/28  siegel
-
-	* share/po/de.po: and another part of updates
-	updates
-
-2002/02/28  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: last translation but not least.
-	further updates
-	update french translation
-
-2002/02/28  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-marble3d.rc: rechanged bg for camille
-
-	* standalone/drakbackup: corrected translation for crontab
-
-2002/02/28  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed bad copy of install packages.
-
-	* tools/oem-prepare: fixed bad copy of INSTALL packages.
-
-	* Xconfigurator.pm: removed Radeon 8500 from DRI capable cards.
-
-2002/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/aliases, rescue/list: include /sbin/fsck.ext3 since our users are
-	so dumb
-
-2002/02/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2002/02/28  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
-	"no" could be either "no-dvorak" or "no-latin1")
-
-	* keyboard.pm (loadkeys_files): ensure each file appear only once
-
-	* bootloader.pm: add "nowarn" in lilo.conf
-
-	* install_steps.pm, fs.pm: use the "soft" option by default for /mnt/nfs
-	and for "diskdrake --nfs"
-
-2002/02/28  sdupont
-
-	* standalone/drakfont: including 'su' mode on drakfont.
-
-2002/02/28  siegel
-
-	* share/po/de.po: updated missing strings
-
-2002/02/28  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Re-activated function to specify a CUPS server in
-	another network and to switch to manual CUPS configuration.
-	  - Fixes/Improvements on Star Office/Open Office support:
-	o When one switches the spooler, the entries of the printers under the
-	     old spooler are removed from Star Office/Open Office
-	   o Printers on remote CUPS servers (which are known through
-	broadcasting)
-	     can be added to Star Office/Open Office
-
-	* share/rpmsrate.server, share/rpmsrate: Added "curl" to install section,
-	it is needed by printerdrake.
-
-	* printer.pm: 
-	  - Fixes/Improvements on Star Office/Open Office support:
-	o When one switches the spooler, the entries of the printers under the
-	     old spooler are removed from Star Office/Open Office
-	   o Printers on remote CUPS servers (which are known through
-	broadcasting)
-	     can be added to Star Office/Open Office
-
-2002/02/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-2002/02/27  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: 
-	  - Improved fully automatic adding of printer queue:
-	o Ask for a queue name if more than one printer is detected
-	   o Let user confirm the model automatically chosen from the database
-	   o Set correct paper size according to the language/country
-	  - When one chooses a "CUPS + GIMP-Print" driver now all important
-	options
-	  are displayed directly (without needing "Advanced" button).
-	  - Made less warning appearing on the console from where "printerdrake"
-	was
-	  called.
-
-2002/02/27  fabman
-
-	* share/po/es.po: converted to UTF-8
-
-2002/02/27  François Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: fix missing version listed when doing update.
-
-2002/02/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few translations
-
-	* mdk-stage1/rescue-gui.c, rescue/restore_ms_boot, rescue/list.i386,
-	rescue/make_rescue_img: add "restore Windows Boot Loader" to rescue
-
-	* install_steps_interactive.pm: formatAlaTex for congratz msg
-	xfs + bootdisk = warning_msg
-
-	* share/rpmsrate: flightgear is now fully lowercase
-	glaxium
-
-	* mdk-stage1/pcmcia_/probe.c: add Keld Jørn Simonsen <keld@dkuug.dk>'s O2
-	Micro
-	CardBus controller, and two other PCI entries which
-	have close descriptions
-
-	* mdk-stage1/pcmcia_/merge_from_pcitable: misc
-	also report when pcitable is "too old"
-	write a short perl program to easily merge new
-	cardbus controllers from pcitable into probe.c
-
-2002/02/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: updated po file
-
-2002/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: simplify pyDict
-
-	* install_steps_interactive.pm: ensure a keyboard is only once available,
-	either in advanced or normal, but
-	not in both (tx2fredl)
-
-	* share/po/da.po: 
-	  - it is UTF-8
-	  - fix line splitting
-
-	* lang.pm: workaround iso-8859-1 charset based languages not displayed
-	correctly at install
-	  - %lang2country is the authority, so if the country given by
-	%lang2country doesn't exist in KDE, return C
-	  - fix be,sp,sr
-	  - s/def/default/ (typo)
-	  - add some utf kde fonts
-
-2002/02/27  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: update french translation
-
-	* standalone/drakxtv: 
-	  - simplify an ACTION||fallback;fallback into ACTION;fallback
-	  - print a message saying that xawtv can be used now at the end of the
-	channels auto-probing in case of direct use from cl and not from
-	  XawTV wrapper (from qa test) aka let the world be better :-)
-
-	* share/po/br.po: minor update
-	update brezhoneg translation
-
-2002/02/26  dam's  <damien@mandrakesoft.com>
-
-	* modparm.pm: corrected bad sprintf
-
-2002/02/26  fabman
-
-	* share/po/es.po: updated spanish translations
-
-2002/02/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version 8.2
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/sv.po, share/po/hu.po: updated po files
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
-	diskdrake/interactive.pm: propose some mount points for
-	removable/nfs/smb
-
-	* install_steps_interactive.pm: if no sound card are detected AND the user
-	selected things needing a sound card, propose a special case for ISA
-	cards
-
-	* share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
-	when asked for a ISA
-	sound card)
-
-	* my_gtk.pm (@icon_paths): ease testing
-
-2002/02/26  siegel
-
-	* share/po/de.po: updates
-
-2002/02/26  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: corrected ttf/TTF and xfs restart
-
-	* share/logo-mandrake.png: new logo
-
-2002/02/26  fabman
-
-	* share/po/es.po: updated spanish translations
-
-2002/02/26  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix translation of test program.
-
-2002/02/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fclose.c: don't segfault when fclose(NULL)
-
-	* share/po/fr.po: 
-	  - explain where to put nbsp spaces, explain
-	what's nbsp spaces, explain how to compose them
-	  - add a few missing nbsp spaces
-	  - translate a few more things
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* any.pm: fixed English typo
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
-	diskdrake/interactive.pm: propose some mount points for
-	removable/nfs/smb
-
-	* Xconfigurator.pm: make perl_checker happy
-	have "Ok  More  Show all" instead of "Ok  Cancel  Show all"
-	set the locale properly instead of setting the translated messages in
-	the script
-
-	* any.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	(devfssymlinkf): use /etc/devfs/conf.d/name.conf instead of putting the
-	symlink in lib/dev-state
-
-	* share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
-	when asked for a ISA
-	sound card)
-	add xine in VIDEO 4
-
-	* install_steps.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	don't add mem=nopentium anymore. kernel people says it's not needed and
-	bad
-	for performance. It also means any bug must be addressed to them
-	create /dev/dvd for DVDs
-
-	* my_gtk.pm (@icon_paths): ease testing
-
-	* lang.pm: create bindtextdomain which does only part of the load_mo job
-
-	* install_steps_interactive.pm: if no sound card are detected AND the user
-	selected things needing a sound card, propose a special case for ISA
-	cards
-
-	* detect_devices.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	cleanup
-
-	* fs.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-
-2002/02/26  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: Ti Powerbook uses non-std 1152x768, rather than
-	1152x864
-
-2002/02/26  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: use "xvt -T" rather than "xvt --title": now not only
-	we support rxvt
-	and xterm but konsole too.
-	the only one missing is gnome-terminal which has -t but not -T
-	update comments
-	  - remove useless "no_edit => 1"
-	  - use interactive_gtk to determine if we're runned under X11 (ie
-	authorized acces to X11 server, X11 context, ...)
-	  - add a note to remember that we should add a method to detect if we
-	  run under X11 if/when we implement interactive_qt
-	  - simplify code :
-		* remove is_tv and simplify its code to be a one-liner (replace a
-		  foreach by a scalar context)
-		* use format to prevent reverse lookup on scantv run thus
-		  enabling to reverse the initial hash table
-	  - all cases (newt, gtk, wt/wo xvt, ...) have been re tested on real
-	hw.
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated po file
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated po file
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/25  dam's  <damien@mandrakesoft.com>
-
-	* any.pm, modparm.pm: corrected modules parameters functions
-
-	* standalone/drakfont: debug
-
-2002/02/25  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixes for cursor or
-	nasty pixel displayed using syslinux-1.67-3mdk
-
-2002/02/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: don't put accents for bootloader, we can just use 7bit
-	chars
-	(titi sucks bigtime)
-	add a few nbsp spaces
-
-	* rescue/list: add mt-st DAT stuff for joeghi (ghibo)
-
-2002/02/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2002/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: ignore-table is a global flag, so put it there (when
-	needed)
-
-	* standalone/drakboot: add --testing
-
-	* modules.pm, install_steps.pm, fs.pm, detect_devices.pm: use ide-scsi for
-	ide zips
-
-	* install_steps_interactive.pm: sort the list of keyboards
-
-2002/02/25  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: fix a typo (thanks gc)
-
-2002/02/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ru.po, share/po/sp.po, share/po/ca.po, share/po/th.po,
-	share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/ro.po,
-	share/po/sv.po, share/po/sr.po, share/po/da.po, share/po/el.po,
-	share/po/et.po, share/po/cs.po, share/po/tr.po, share/po/az.po,
-	share/po/eu.po: updated some po files
-
-2002/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: fix permission
-
-2002/02/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cy.po, share/po/Makefile: updated Welsh file
-
-	* share/po/zh_CN.po, share/po/DrakX.pot, share/po/eu.po, share/po/vi.po,
-	share/po/wa.po, share/po/zh_TW.po: udated Vietnamese file
-
-	* install_steps_interactive.pm: removed useless _( ) around a string
-	displayed in English only
-
-	* share/po/be.po, share/po/bg.po, share/po/sk.po, share/po/ar.po,
-	share/po/sl.po, share/po/br.po, share/po/bs.po, share/po/sv.po,
-	share/po/af.po: updated some po files
-
-2002/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_newt.pm: 
-	  - use simplify_string to ensure multi-line and too long strings are
-	not used
-	(hacky, but no other solution)
-	  - set $::setstep like interactive_gtk is doing (??)
-
-	* partition_table_empty.pm: handle MBR containing the same character (0 or
-	"l")
-
-	* diskdrake/interactive.pm: not_edit'able filesystem type (allow esp. a
-	nicer newt version)
-
-	* devices.pm (devices::make): following a good advice from Andrej
-	Borsenkow, return the
-	file even if the device file doesn't exist the caller will fail or not.
-	The
-	advantage is better compatibility than raising an exception
-	devices::make doesn't mknod with devfs
-
-	* detect_devices.pm: no need to catch the exception from devices::make
-	anymore
-	devices::make doesn't mknod with devfs
-
-	* fs.pm: nicer error message when mount fails
-
-	* share/rpmsrate: adding gphoto2
-
-	* install_steps_interactive.pm: when passwords do not match, focus on
-	first password entry, not the second (thanks to garrick)
-
-	* Xconfigurator_consts.pm: remove Option "sw_cursor" for "SiS 6326" since
-	it's already handled in Xconfigurator.pm
-
-	* my_gtk.pm: fix @icon_paths to include /usr/share/libDrakX/pixmaps
-	(thanks to garrick)
-
-	* modules.pm: remove "-f" option for insmod
-
-2002/02/23  siegel
-
-	* share/po/de.po: fixed silly error
-	updates
-
-2002/02/23  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of printers
-	in Star Office and Open Office.
-
-2002/02/22  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/02-internet.pl, share/advertising/07-server.pl,
-	share/advertising/11-consul.pl, share/advertising/09-MDKcampus.pl,
-	share/advertising/01-gnu.pl, share/advertising/13-Nvert.pl,
-	share/advertising/06-user.pl, share/advertising/10-MDKexpert.pl,
-	share/advertising/04-develop.pl, share/advertising/05-contcenter.pl,
-	share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
-	share/advertising/08-games.pl: corrected advertising text
-
-	* share/po/fr.po: corrected bad translation
-
-	* my_gtk.pm: corrected icon paths
-
-2002/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: exit the pur_gtk version after launching the wizard
-	version
-
-	* any.pm: better rephrasing
-	change name and description of security levels
-
-	* share/rpmsrate: powermanga: 2 -> 3
-
-2002/02/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/DrakX.pot: updated Danish file
-
-	* lang.pm: start of support of kde fonts
-	fixed some keyboard names
-
-	* keyboard.pm: fixed some keyboard names
-	added the two ?win_toggle choices
-	some info useful for keyboard handling
-
-	* share/keyboards.tar.bz2: fixed some keyboard names
-
-	* share/po/hu.po: updated hungarian file
-
-2002/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: even smarted process to kill selection
-
-	* lang.pm: fix 2 entries in charset2kde_font
-	  - remove non needed entries in lang2country
-	  - fix syntax errors
-	  - rename kdefont in charset2kde_font
-	  - much cleanup
-	use invalid instead of unknown for errors when checking
-	put back the less deep langs
-	have the tree less deep (esp. nicer when not displaying UTF-8 entries)
-	not translating in console installs (esp. newt) when the font is missing
-	restrict the langs displayed to non utf8 during install
-	fix warning message
-	disable perl warnings when checking
-	make perl_checker happy
-
-	* devices.pm: add atibm (thanks to Robin Pollard)
-
-	* bootloader.pm: put ignore-table to disable lilo's partition table
-	checking
-	(esp. the checking of the CHS geometry vs linear geometry)
-
-	* Xconfigurator_consts.pm: fix syntax typo
-
-	* Makefile: 
-	  - exclude urpm from perl_checker
-	  - add checking keyboard.pm
-
-	* install_steps_interactive.pm, install2.pm, install_steps.pm: not
-	translating in console installs (esp. newt) when the font is missing
-
-	* keyboard.pm: use invalid instead of unknown for errors when checking
-	change the message
-	disable perl warnings when checking
-	  - add checks for the various data structures
-	  - fix another typo for usb2drakxkbd
-	fix typo
-
-	* share/rpmsrate: add procmail in SYSTEM 4
-	add samba-doc samba-winbind samba-swat
-
-	* Xconfigurator.pm: workaround set_active failing
-
-	* any.pm: use the setupBootloader help instead of setupBootloaderGeneral
-	restrict the langs displayed to non utf8 during install
-
-2002/02/22  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: update TODO list;
-	explain what is HRC
-
-	* share/po/fr.po: further translations
-	update french translation
-
-2002/02/21  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected icon list
-
-2002/02/21  fabman
-
-	* share/po/es.po: updated spanish po file
-
-2002/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: spacecup no more exists
-	armagetron is nice, no use to install gltron as well
-	autoconf2.5 and automake1.5
-
-	* interactive.pm: when not in X and needs su, use consolehelper now
-	use consolehelper when no "kdeinit: kwin" process
-	is running
-
-2002/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm, install_any.pm: ensure lvm tools don't need to be all installed
-	at the same time
-
-	* lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
-	getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
-	* share/rpmsrate: add kinput2-wnn4
-
-2002/02/21  siegel
-
-	* share/po/de.po: update
-
-2002/02/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Removed "Manual configuration" button when "Local
-	Printer" dialog is started from the queue modification menu (Recommended
-	mode).
-	Improved matching of printer names resulting from auto-detection with
-	names in the database.
-
-2002/02/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: final batch of typos fixes (next time, please run a
-	check speller)
-	fix more typos
-	update french translation;
-	fix typos
-
-	* diskdrake/interactive.pm: shorter displayed message
-
-2002/02/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: changed button label
-
-	* standalone/icons/gmon.png, standalone/icons/categ.png,
-	standalone/icons/verti.png, standalone/icons/drakbackup.540x57.png,
-	standalone/icons/net_c.png, standalone/icons/ic82-system-40.png,
-	standalone/icons/wiz_drakgw.png, standalone/icons/ic-drakfont-48.png,
-	standalone/icons/ic82-back-up-16.png,
-	standalone/icons/wiz_scannerdrake.png,
-	standalone/icons/ic82-discdurwhat-40.png,
-	standalone/icons/ic82-tape-40.png, standalone/icons/ic82-network-40.png,
-	standalone/icons/smbnfs_default.png, standalone/icons/smbnfs_server.png,
-	standalone/icons/hori.png, standalone/icons/wiz_draknet.png,
-	standalone/icons/smbnfs_mounted.png, standalone/icons/wiz_firewall.png,
-	standalone/icons/wiz_default_up.png,
-	standalone/icons/ic82-back-up-32.png, standalone/icons/ic82-CD-40.png,
-	standalone/icons/ic82-systemeplus-40.png,
-	standalone/icons/ic82-back-up-48.png,
-	standalone/icons/ic82-dossier-32.png, standalone/icons/net_d.png,
-	standalone/icons/ic82-moreoption-40.png,
-	standalone/icons/smbnfs_has_mntpoint.png, standalone/icons/tradi.png,
-	standalone/icons/wiz_printerdrake.png,
-	standalone/icons/wiz_default_left.png,
-	standalone/icons/eth_card_mini2.png, standalone/icons/net_u.png,
-	standalone/icons/ic82-users-40.png, standalone/icons/mdk_logo.png,
-	standalone/icons/ic82-others-40.png, standalone/icons/ic82-when-40.png,
-	standalone/icons/draknet_step.png, standalone/icons/drakfont.620x57.png,
-	standalone/icons/ic82-where-40.png: added new gfx only standalone
-
-	* pixmaps/categ.png, pixmaps/verti.png, pixmaps/ic82-moreoption-40.png,
-	pixmaps/ic82-system-40.png, pixmaps/net_c.png,
-	pixmaps/ic-drakfont-48.png, pixmaps/ic82-CD-40.png,
-	pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
-	pixmaps/draknet_step.png, pixmaps/ic82-dossier-32.png,
-	pixmaps/ic82-back-up-48.png, pixmaps/smbnfs_server.png,
-	pixmaps/ic82-discdurwhat-40.png, pixmaps/smbnfs_default.png,
-	pixmaps/gmon.png, pixmaps/drakbackup.540x57.png,
-	pixmaps/smbnfs_mounted.png, pixmaps/wiz_printerdrake.png,
-	pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
-	pixmaps/drakfont.620x57.png, pixmaps/ic82-tape-40.png,
-	pixmaps/wiz_draknet.png, pixmaps/net_d.png,
-	pixmaps/ic82-systemeplus-40.png, pixmaps/wiz_drakgw.png,
-	pixmaps/mdk_logo.png, pixmaps/ic82-users-40.png,
-	pixmaps/ic82-back-up-16.png, pixmaps/hori.png, pixmaps/tradi.png,
-	pixmaps/smbnfs_has_mntpoint.png, pixmaps/eth_card_mini2.png,
-	pixmaps/wiz_firewall.png, pixmaps/net_u.png, pixmaps/ic82-where-40.png,
-	pixmaps/ic82-others-40.png, pixmaps/ic82-network-40.png,
-	pixmaps/wiz_scannerdrake.png: removed gfx not used during install
-
-2002/02/21  François Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: fixed another not seen 8.1 reference in label.
-	fixed 8.1 release hard coded.
-
-2002/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fi.po: updated pot file
-	updated Finnish file
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/themes/blueHeart-button4.png, share/themes-DarkMarble.rc,
-	install_gtk.pm, share/themes/DarkMarble-button3_out.png,
-	share/themes.rc, share/themes/blueHeart-brown_bg1.png,
-	share/themes/DarkMarble-button3_in.png, share/themes-blueHeart.rc,
-	share/themes/DarkMarble-check_on.png,
-	share/themes/blueHeart-button1.png,
-	share/themes/DarkMarble-check_off.png,
-	share/themes/blueHeart-button2.png, share/themes/DarkMarble-gloom2.png,
-	share/themes/DarkMarble-button3_in_prelight.png,
-	share/themes/DarkMarble-button3_out_prelight.png: remove DarkMarble and
-	blueHeart themes
-
-	* bootloader.pm: have devfs=nomount for failsafe
-
-	* Makefile.config, share/po/Makefile: make a difference between PMS and
-	ALLPMS. For install, only use PMS
-
-	* lvm.pm: ensure lvm tools don't need to be all installed at the same time
-
-	* Makefile: template.in stuff removed
-	make a difference between PMS and ALLPMS. For install, only use PMS
-
-	* pkgs.pm: smarter choosing of processes to kill
-
-	* tools/i386/netboot/make_boot_network: cleanup
-
-	* modules.pm: add aic7xxx_old
-
-	* install_any.pm: ensure lvm tools don't need to be all installed at the
-	same time
-	(remove_bigseldom_used): remove xf86Wacom.so & mkfs.xfs
-	DarkMarble theme is removed
-	(kdeicons_postinstall): remove this obsolete code
-	no special case for installing imwheel
-
-	* lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
-	getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
-	* network/smbnfs.pm, network/nfs.pm: nicer conditional displaying of nfs
-	comment
-
-2002/02/21  siegel
-
-	* share/po/de.po: update
-	snapshot
-
-2002/02/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added "type => 'list'" to the printer modification
-	menu, it appeared as a drop-down list during the installation.
-
-2002/02/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: more translatable strings;
-	hide scantv output on console;
-	check that we're under X11 before running scantv in an xterm
-
-2002/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/doc/UPDATEMODULES: add an example on modules with options
-	first line comment no more necessary
-	s/row/column/, silly me
-
-	* standalone.pm: explanations stuff: no reason to use "updated" at a place
-	when we
-	use "modified" at the rest of the locations..
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-	updated Spanish file
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (ejectCdrom): display "files still open:" for all
-	processes when umounting fail
-
-	* pkgs.pm: much simpler & stronger killing of still running processes
-
-	* mouse.pm: USB|Generic is 3 button mice, add a USB 2 Button entry
-
-2002/02/20  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-marble3d.rc: updated theme
-
-	* network/adsl.pm: mgmt install corrected
-
-2002/02/20  daouda
-
-	* share/rpmsrate: 
-	  - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20  fcrozat
-
-	* share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, tools/oem-prepare: synced with newer rpmsrate of
-	DrakX and newer method to select INSTALL packages.
-
-	* standalone/XFdrake: fixed NVIDIA package in urpmi db by directly using
-	urpm library instead of
-	parsing (now removed) depslist.ordered file.
-
-	* Xconfigurator.pm: fixed default value if selecting a card (use previous
-	one or existing one).
-	added XFree 4 driver choice if Other|Unlisted is chosen.
-	fixed cancel on card selection so that previous choice is not lost.
-
-	* Xconfigurator_consts.pm: added @allbutfbdrivers and @alldrivers for
-	listing XFree 4 drivers.
-
-2002/02/20  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add gcc3.0-c++ and libstdc++3.0-devel
-	  - Prefer gcc3.0-java over gcc-java
-	  - Remove BasiliskII-sheepnet since it does no longer exist
-	  - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated FRench file
-
-	* share/po/es.po: updated Spanish file
-	updated Spanish file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix s/SILO/LILO/
-
-	* fsedit.pm: have "with /usr" translated
-
-	* install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
-	button
-
-	* steps.pm: move installUpdates after configureX (workaround for bad
-	timeouts during installing updates)
-
-	* install_steps.pm, any.pm, standalone/draksec: factorize and update the
-	reading of previous security level
-
-2002/02/20  siegel
-
-	* share/po/de.po: update
-
-2002/02/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update french translations
-
-2002/02/20  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/13-Nvert.pl: changed toll free
-
-	* my_gtk.pm: added mcc kill if wait message
-
-	* standalone/logdrake: cosmetic change, mcc compliance
-
-2002/02/20  daouda
-
-	* share/rpmsrate: 
-	  - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20  fcrozat
-
-	* share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: fixed INSTALL category in rpmsrate for copying
-	file when changing cd (was an
-	limitation in read_rpmsrate when a package having a category and INSTALL
-	caused
-	INSTALL to be dropped).
-
-2002/02/20  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add gcc3.0-c++ and libstdc++3.0-devel
-	  - Prefer gcc3.0-java over gcc-java
-	  - Remove BasiliskII-sheepnet since it does no longer exist
-	  - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/advertising/07-server.pl, share/advertising/01-gnu.pl: Improved
-	English strings
-
-	* share/po/hu.po, share/po/es.po, share/po/ar.po: updated Hungarian and
-	Spanish files
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove fsck_option (obsolete)
-
-	* share/po/fr.po: fix s/SILO/LILO/
-
-	* fsedit.pm: have "with /usr" translated
-
-	* install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
-	button
-
-	* steps.pm: move installUpdates after configureX (workaround for bad
-	timeouts during installing updates)
-
-	* install_steps.pm, any.pm, standalone/draksec: factorize and update the
-	reading of previous security level
-
-2002/02/20  siegel
-
-	* share/po/de.po: snapshot
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19  fcrozat
-
-	* share/rpmsrate: 
-	  -Install gnome-vfs-extras when installing nautilus (to get samba
-	browsing)
-	  -don't install nautilus-mozilla, it is pulled by nautilus
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: english fix
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-	* diskdrake/smbnfs_gtk.pm: ugly hack to fix die
-
-2002/02/19  siegel
-
-	* share/po/de.po: updates for beta 3
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
-	$prefix in front of /var/* when missing
-	since we give "lilo.conf" in drakbug_report, let's also
-	give "menu.lst"
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-2002/02/19  siegel
-
-	* share/po/de.po: updates for beta 3
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: setting help
-
-	* share/advertising/10-MDKexpert.png, share/advertising/07-server.png,
-	share/advertising/05-contcenter.png, share/advertising/03-graphic.png,
-	share/advertising/12-MDKstore_icon.png,
-	share/advertising/06-user_icon.png,
-	share/advertising/04-develop_icon.png,
-	share/advertising/12-MDKstore.png, share/advertising/00-thanks.png,
-	share/advertising/06-user.png, share/advertising/02-internet_icon.png,
-	share/advertising/04-develop.png,
-	share/advertising/05-contcenter_icon.png,
-	share/advertising/10-MDKexpert_icon.png, share/advertising/13-Nvert.png,
-	share/advertising/11-consul.png, share/advertising/03-graphic_icon.png,
-	share/advertising/02-internet.png, share/advertising/07-server_icon.png,
-	share/advertising/01-gnu.png, share/advertising/08-games.png,
-	share/advertising/09-MDKcampus.png,
-	share/advertising/09-MDKcampus_icon.png,
-	share/advertising/08-games_icon.png: re-adding with -kb
-	removing for re-adding with -kb
-	added advertising for translation
-
-	* share/advertising/essi.p: blah
-	added advertising for translation
-
-	* my_gtk.pm: new icon handler
-
-	* Makefile.config: addde share/advertising/*.pl for translation
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-	* share/advertising/00-thanks.pl, share/advertising/06-user.pl,
-	share/advertising/08-games.pl, share/advertising/list,
-	share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl,
-	share/advertising/11-consul.pl, share/advertising/13-Nvert.pl,
-	share/advertising/02-internet.pl, share/advertising/07-server.pl,
-	share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl,
-	share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl,
-	share/advertising/03-graphic.pl: added advertising for translation
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
-	$prefix in front of /var/* when missing
-	since we give "lilo.conf" in drakbug_report, let's also
-	give "menu.lst"
-
-2002/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/hu.po: updated Vietnamese and Hungarian files
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-	* install2.pm: anchor the -IP match at the end of the string
-	move loading /tmp/network from stage1 before doing the auto_install
-	stuff to
-	allow the -IP feature on auto_install file name
-
-	* share/rpmsrate: add grub in 4 SYSTEM
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* standalone/printerdrake, printer.pm: Assured that the default page size
-	is "Letter" for US/Canada and "A4" for the rest of the world.
-	The "Description" field of a printer queue is filled in with printer
-	manufacturer and model by default.
-	Removed unused varaiables in /usr/sbin/printerdrake.
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-	Assured that the default page size is "Letter" for US/Canada and "A4"
-	for the rest of the world.
-	The "Description" field of a printer queue is filled in with printer
-	manufacturer and model by default.
-	Removed unused varaiables in /usr/sbin/printerdrake.
-
-	* install_steps_interactive.pm: Replaced "a4" and "letter" by "A4" and
-	"Letter" so that Foomatic recognizes
-	the paper sizes.
-	Also use "Letter" paper for "en_CA" and "fr_CA" locales.
-
-2002/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: when no net device found, print a msg to tell
-	that now most pcmcia network adapters are supported
-	with network.img
-
-2002/02/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/DrakX.pot, share/po/th.po,
-	share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po,
-	share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po,
-	share/po/vi.po, share/po/uk.po, share/po/wa.po, share/po/sv.po,
-	share/po/zh_TW.po, share/po/it.po: updated pot file
-
-2002/02/18  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm, standalone/localedrake: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-
-	* install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
-2002/02/18  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/02/18  fcrozat
-
-	* share/rpmsrate: Install Guppi when installing gnumeric
-
-2002/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: titi sucks again
-
-2002/02/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po: updated Slovak ile
-	updated pot file
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	updated pot file
-
-2002/02/18  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: 
-	  - remove media_type cdrom-burner, use {capacity} instead
-	  - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - add Cancel
-	  - move "click here" in "Search servers" on the right side
-	  - remove Export
-	  - fix bug
-
-	* share/rpmsrate: raise xsane in SCANNER (Yves Duret)
-	raise mkisofs & cdrecord in BURNER
-
-	* Xconfigurator.pm: workaround not having the right to connect to our new
-	created test server.
-	info about the pb (sorry for the french):
-	quand on lance le serveur
-	  - via xdm/kdm/startx, ca utilise xauth, xhost est fermé
-	  - via X/xinit, xhost est ouvert sur localhost, xauth n'est pas utilisé
-	  *sauf* si X/xinit est lancé à partir d'un X *et* .Xauthority est non
-	vide.
-	    dans ce cas, xhost est fermé, et aucun xauth n'est ajouté
-	    une conséquence, c'est que XFdrake ne peut pas accéder au X de
-	    test si XFdrake est lancé sous X ou "xauth list" est non vide
-	      exception: quand on lance le xdm/kdm en root, xhost n'est pas
-	fermé,
-	         pas contre il est fermé en root & startx.
-
-	* any.pm (fileshare_config): rework the custom message and launch
-	userdrake
-	(report_bug): add lilo.conf
-
-	* standalone/localedrake: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-	change the message & ask wether to logout or not
-
-	* lang.pm: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-	(lang2kde_lang): add missing valid_kde_langs
-	fuzzy language finding between available langs when it doesn't match
-	(useful for upgrades where fr_FR was fr_FR@euro)
-
-	* diskdrake/interactive.pm: remove cdrom-burner from media_type set
-
-	* install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
-	* fs.pm (mount_options_unpack): add usrquota and grpquota for
-	ext2/ext3/reiserfs/xfs
-	  - remove media_type cdrom-burner, use {capacity} instead
-	  - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
-	* share/compssUsers: add EDITORS in Development/Development
-	add EDITORS in Development/Development
-
-2002/02/18  yduret
-
-	* bootlook.pm: remove aurora part (commented for the moment)
-
-	* standalone/scannerdrake: HP OfficeJet support
-	scsi/parport preliminary support
-
-	* scanner.pm: update
-	scsi parport preliminary support
-	no more show unsupported scanner
-	common output for ScannerDB update from sane *.desc files and from
-	usbtable
-
-2002/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm: warn_if_renumbered now also done at install
-
-2002/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: have icewm-light in any case (to be used as a failsafe
-	window manager)
-	add hotplug, usbutils and usbview with the new flag USB
-
-	* install_any.pm: hotplug now handled via rpmsrate and the USB flag
-	add some log to know why umounting /tmp/image fail
-
-	* diskdrake/interactive.pm: warn_if_renumbered now also done at install
-	force scalar context for warp_text
-
-	* share/po/id.xsl, share/po/help_xml2pm.pl: use xsltproc as a filter to
-	remove entities
-
-	* share/po/Makefile (clean): remove .memdump
-
-	* any.pm (autologin): do not allow empty user name since no autologin can
-	already be achieved by choosing "No"
-
-	* install2.pm: do not use run_program::xxx, use directly "system" so that
-	stdout is kept unchanged during "postInstall" execution
-
-	* network/smb.pm: fix typo (s/nfs/smbfs/)
-
-2002/02/17  siegel
-
-	* help.pm: new version for 8.2
-
-	* share/po/de.po: new german version
-
-	* share/po/help_xml2pm.pl: added check for missing xsltproc
-	fix perl warnings after adding -w
-
-	* share/po/.cvsignore: added .memdump
-
-	* share/po/Makefile: allow me to work with a symlink to doc in this
-	directory
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm: 
-	  - LVs "device" field were containing "/dev/vg/number" whereas it must
-	be "vg/name"
-	  - added lv_resize
-
-	* diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
-	* crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig.pm: 
-	  - prefer XKB available from existing XF86Config over
-	/etc/sysconfig/keyboard KEYTABLE
-	  - fix translating from /etc/sysconfig/keyboard KEYTABLE to XKB
-
-	* diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
-	* interactive_newt.pm: do not trash error messages if testing
-
-	* lang.pm (country2lang): created
-	(write): ensure it doesn't fail when kdeglobals is not writable (eg: the
-	directory doesn't exist)
-	(list): return the languages in a "specific" order (favours non utf8
-	over utf8)
-
-	* crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
-	* install_steps_interactive.pm (setupSCSI): when "clicked", ask "Do you
-	have any SCSI interfaces" instead
-	of assuming there is a SCSI interface and asking the driver name
-
-	* lvm.pm: 
-	  - LVs "device" field were containing "/dev/vg/number" whereas it must
-	be "vg/name"
-	  - added lv_resize
-	  - call pvcreate with "-y -ff"
-	  - created LVs are notFormatted
-
-	* interactive.pm: 
-	  - fix non X + testing + su
-	  - since "interactive" takes care of "format" for type "combo", remove
-	"format" (so that interactive_newt which switch to type "list" don't
-	apply
-	"format" once again)
-
-	* standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (country2lang): created
-	(write): ensure it doesn't fail when kdeglobals is not writable (eg: the
-	directory doesn't exist)
-	(list): return the languages in a "specific" order (favours non utf8
-	over utf8)
-	fix call to update_gnomekderc
-
-	* standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/sk.po, share/po/cs.po, share/po/es.po: updated Czech, Spanish
-	and Slovak files
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm: fix call to update_gnomekderc
-	remove unused & unneeded special %lang2kde_lang
-	  - add lang::check
-	  - fix utf-ko -> utf_ko
-	  - fix utf-14 -> utf_14
-	  - modify share/config/kdeglobals
-	  - add charset2kde_charset, lang2country, lang2kde_lang
-
-2002/02/15  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: embedded mode correction
-
-	* my_gtk.pm: highlight in gtk icon widget
-
-	* share/themes/mdk-check_on.png, share/themes/mdk-toggle_off.png,
-	share/themes/mdk-toggle_on.png, share/themes/mdk-check_off.png: new gfx
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
-	share/step-orange-on.xpm, share/step-green-on.xpm,
-	share/step-red-click.xpm: new gfx
-	new gfx
-
-2002/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/fi.po, share/po/DrakX.pot, share/po/fr.po,
-	share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/hu.po,
-	share/po/eu.po: updated Basque file; fixed a msgid change
-
-	* share/po/sv.po: updated Swedish file
-	updated Basque file; fixed a msgid change
-
-2002/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm: remove assigning STDIN to /dev/null since:
-	  - programs should not use STDIN
-	  - the "postInstall" script for auto_install's is more happy still
-	having the STDIN.
-
-	* diskdrake/smbnfs_gtk.pm, pixmaps/smbnfs_has_mntpoint.png,
-	pixmaps/smbnfs_default.png, pixmaps/smbnfs_mounted.png,
-	pixmaps/smbnfs_server.png: add icons showing if a mount-point is
-	associated or if the share is mounted
-
-	* pkgs.pm: fix typo
-
-	* diskdrake/interactive.pm: use the new warp_text
-
-	* install_steps.pm: use lang::charset2kde_charset
-
-	* standalone/localedrake: lang::write doesn't need the filename anymore
-
-	* any.pm: use 'combo' instead of 'type' for bootloader choice and security
-	choice
-	(requested by fredb&dadou)
-
-	* interactive_gtk.pm: force scalar for Gtk::Label->new with warp_text
-
-	* interactive.pm: favour "combo" over "list" in any case
-
-	* Makefile (check): add lang::check checking
-
-2002/02/15  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update translation
-
-2002/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
-	* network/smb.pm, network/smbnfs.pm, network/nfs.pm: cleaner & OOed code,
-	with more code sharing
-
-	* interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
-	feature
-
-	* my_gtk.pm (ctree_set_icon): new function
-
-	* diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
-	mount-point is associated are coming
-
-	* standalone/diskdrake: fix expert and testing options handling
-
-2002/02/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: embedded mode
-	drakfont embedde mode
-
-	* share/step-red-on.xpm, share/step-red.xpm, share/step-orange.xpm,
-	share/step-orange-on.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-red-click.xpm,
-	share/step-green-on.xpm: new gfx
-
-2002/02/14  erwan
-
-	* tools/i386/netboot/ni5010/pxegrub, tools/i386/netboot/epic100/stage1,
-	tools/i386/netboot/epic100/stage2, tools/i386/netboot/3c90x/pxegrub,
-	tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/ni5210/nbgrub,
-	tools/i386/netboot/otulip/stage1, tools/i386/netboot/otulip/stage2,
-	tools/i386/netboot/exos205/nbgrub, tools/i386/netboot/eepro/stage1,
-	tools/i386/netboot/eepro/stage2, tools/i386/netboot/3c529/nbgrub,
-	tools/i386/netboot/smc9000/pxegrub, tools/i386/netboot/ne2100/stage1,
-	tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/pxegrub,
-	tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/ne/stage1,
-	tools/i386/netboot/ne/stage2, tools/i386/netboot/tulip/nbgrub,
-	tools/i386/netboot/sk_g16/nbgrub, tools/i386/netboot/eepro100/pxegrub,
-	tools/i386/netboot/tiara/nbgrub, tools/i386/netboot/rtl8139/stage1,
-	tools/i386/netboot/rtl8139/stage2, tools/i386/netboot/tiara/pxegrub,
-	tools/i386/netboot/lance/nbgrub, tools/i386/netboot/depca/nbgrub,
-	tools/i386/netboot/ni6510/stage1, tools/i386/netboot/3c90x/nbgrub,
-	tools/i386/netboot/ni6510/stage2, tools/i386/netboot/smc9000/stage1,
-	tools/i386/netboot/smc9000/stage2, tools/i386/netboot/3c509/pxegrub,
-	tools/i386/netboot/3c509/stage1, tools/i386/netboot/3c509/stage2,
-	tools/i386/netboot/sis900/pxegrub, tools/i386/netboot/ne2100/pxegrub,
-	tools/i386/netboot/3c595/nbgrub, tools/i386/netboot/eepro/pxegrub,
-	tools/i386/netboot/wd/nbgrub, tools/i386/netboot/ns8390/nbgrub,
-	tools/i386/netboot/ni5210/stage1, tools/i386/netboot/ni5010/nbgrub,
-	tools/i386/netboot/ni5210/stage2, tools/i386/netboot/exos205/stage1,
-	tools/i386/netboot/exos205/stage2, tools/i386/netboot/eepro100/nbgrub,
-	tools/i386/netboot/3c529/stage1, tools/i386/netboot/3c529/stage2,
-	tools/i386/netboot/sis900/stage1, tools/i386/netboot/tulip/stage1,
-	tools/i386/netboot/sis900/stage2, tools/i386/netboot/tulip/stage2,
-	tools/i386/netboot/sk_g16/stage1, tools/i386/netboot/w89c840/nbgrub,
-	tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/tiara/stage1,
-	tools/i386/netboot/tiara/stage2, tools/i386/netboot/depca/stage1,
-	tools/i386/netboot/lance/stage1, tools/i386/netboot/3c90x/stage1,
-	tools/i386/netboot/depca/stage2, tools/i386/netboot/lance/stage2,
-	tools/i386/netboot/3c90x/stage2, tools/i386/netboot/otulip/pxegrub,
-	tools/i386/netboot/tulip/pxegrub, tools/i386/netboot/epic100/nbgrub,
-	tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/pxegrub,
-	tools/i386/netboot/3c595/stage2, tools/i386/netboot/w89c840/pxegrub,
-	tools/i386/netboot/wd/stage1, tools/i386/netboot/wd/pxegrub,
-	tools/i386/netboot/wd/stage2, tools/i386/netboot/otulip/nbgrub,
-	tools/i386/netboot/ns8390/stage1, tools/i386/netboot/eepro/nbgrub,
-	tools/i386/netboot/ni5010/stage1, tools/i386/netboot/ns8390/stage2,
-	tools/i386/netboot/ni5010/stage2, tools/i386/netboot/ne2100/nbgrub,
-	tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/eepro100/stage1,
-	tools/i386/netboot/eepro100/stage2, tools/i386/netboot/ne/nbgrub,
-	tools/i386/netboot/depca/pxegrub, tools/i386/netboot/ne/pxegrub,
-	tools/i386/netboot/w89c840/stage1, tools/i386/netboot/rtl8139/nbgrub,
-	tools/i386/netboot/w89c840/stage2, tools/i386/netboot/sk_g16/pxegrub,
-	tools/i386/netboot/lance/pxegrub, tools/i386/netboot/ni6510/nbgrub,
-	tools/i386/netboot/smc9000/nbgrub, tools/i386/netboot/3c529/pxegrub,
-	tools/i386/netboot/3c595/pxegrub, tools/i386/netboot/ns8390/pxegrub,
-	tools/i386/netboot/epic100/pxegrub, tools/i386/netboot/3c509/nbgrub: New
-	version of grub (0.91) with allstage and pxegrub
-
-	* tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/3c507/stage1,
-	tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c503/nbgrub,
-	tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c507/nbgrub,
-	tools/i386/netboot/3c503/stage1, tools/i386/netboot/3c503/stage2:
-	Fixning some file missing in netboot
-
-2002/02/14  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed obsoletes management according to urpmi code.
-
-2002/02/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ga.po, share/po/cy.po, share/po/is.po, share/po/ar.po,
-	share/po/sl.po, share/po/ro.po: Instead of temporary removingfiles from
-	CVS put a rule in Makefile to
-	don't use them (thanks Thierry)
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/pt_BR.po: updted Brazilian file
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po,
-	share/po/ru.po, share/po/hr.po, share/po/ko.po, share/po/nl.po,
-	share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated some po files; removed the ones
-	too lowly translated for the 8.2
-
-	* share/po/vi.po: updated Vietnamese file
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/Makefile: Instead of temporary removingfiles from CVS put a
-	rule in Makefile to
-	don't use them (thanks Thierry)
-
-2002/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
-	* network/smbnfs.pm, network/smb.pm, network/nfs.pm: cleaner & OOed code,
-	with more code sharing
-
-	* interactive.pm: if testing, don't use kdesu
-
-	* install_steps.pm: gzip report.bug
-
-	* interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
-	feature
-
-	* standalone/diskdrake: fix expert and testing options handling
-
-	* my_gtk.pm (ctree_set_icon): new function
-
-	* c/stuff.xs.pm: undef'ing some macros used by 2 independent sources et
-	still needed :-(
-	#include iconv.h is needed even when C_RPM is undefined
-
-	* diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
-	mount-point is associated are coming
-
-2002/02/14  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/br.po: update
-	convert to utf-8
-
-	* standalone/drakxtv: uses xawtv internal strings instead of frequencies
-	tables ids as values
-	in %freqtables in order to enhance drakxtv robustness when
-	translators'll
-	arrive. thus we'll pass right strings to scantv instead of translated
-	ones
-	explain how we manage the "all frequencies" case
-	display sorted tv norms
-
-2002/02/13  erwan
-
-	* tools/i386/netboot/device.map, tools/i386/netboot/makeImages: Adding
-	missing file on netboot
-
-	* tools/i386/netboot/make_boot_network, tools/i386/netboot/grub: updating
-	grub in netboot
-
-2002/02/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: avoid generating headers for copying file in
-	postinstall-rpm directory.
-	make sure not to crash if a package that should have been in CD1 is
-	somewhere
-	else.
-	fixed stupid typo.
-	removed all @needToCopy... variables and now use INSTALL category in
-	rpmsrate.
-
-	* share/rpmsrate: updated INSTALL category with the merge of DrakX
-	obsoleted list (it will use
-	INSTALL now :-)
-
-	* pkgs.pm: added extension to setSelectedFromCompssList.
-
-	* share/rpmsrate.server: synced INSTALL category with standard rpmsrate.
-
-2002/02/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Danish and Hungarian files
-
-	* share/po/da.po: updated Danish file
-	updated Danish and Hungarian files
-
-2002/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* network/nfs.pm: $server->{ip} is no more mandatory
-
-	* network/smb.pm: don't show shares ending with "$"
-	$server->{ip} is no more mandatory
-
-	* any.pm (setupBootloader): switch from "list" to "combo"
-
-	* fs.pm (fstab_to_string): unsetting mount points in standalone will now
-	work
-	  - handle WORM type in /proc/scsi/scsi
-	  - added media_type cdrom-burner
-	  - adapting to new media_type
-	  - nicer fd&hd testing
-
-	* diskdrake/smbnfs_gtk.pm: have the fstab entries shown by default
-
-	* detect_devices.pm, diskdrake/interactive.pm: 
-	  - handle WORM type in /proc/scsi/scsi
-	  - added media_type cdrom-burner
-	  - adapting to new media_type
-	  - nicer fd&hd testing
-
-2002/02/13  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: When one visited the help page of a remote CUPS printer
-	afterwards the full
-	printer modification menu was shown, not only the one for remote CUPS
-	printers. This is fixed now.
-
-2002/02/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/DrakX.pot: updated Czech and Walloon files
-
-	* share/po/cs.po: updated Czech file
-	updated Czech and Walloon files
-
-2002/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
-2002/02/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm: In the USB auto-detection checked whether and where
-	the device node was
-	created.
-
-2002/02/12  dam's  <damien@mandrakesoft.com>
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/themes/mdk-check_on.png, share/step-green-click.xpm,
-	share/step-green.xpm, share/step-red-click.xpm,
-	share/themes/mdk-check_off.png: new gfx
-
-	* standalone/drakbackup, network/network.pm: bug correction
-
-2002/02/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
-	* docs/README.pxe: cleanup the .cfg
-
-	* share/rpmsrate: 
-	  - move bootsplash from SYSTEM to X
-	  - lower Aurora
-
-2002/02/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed:
-	  - Endless loop when entering printerdrake during installation in
-	recommended
-	mode without local printer
-	  - Printerdrake was not closed when one was in the "Add Printer"
-	sequence
-	  during installation and one clicked another installation item (entries
-	  on left hand side)
-	  - When configuring printing only after installation Printerdrake tried
-	to
-	  check the installed queues without Foomatic being installed (bug was
-	  already in 8.1, but noone discovered it).
-	  - CUPS died when one tried to add a (local) printer in recommended
-	mode
-	  after installation.
-	  - Improved text for the dialog telling that no local printer was
-	detected.
-	  - The list of auto-detected printers appeared as drop-down menu and
-	not as
-	  a list.
-
-	* detect_devices.pm: In the USB auto-detection checked whether and where
-	the device node was
-	created.
-	Fixes on device auto-detection:
-	  - Made USB printer auto-detection routine in "detect_devices.pm"
-	creating
-	the appropriate device nodes (needed for USB printers being recognized
-	  during installation).
-	  - Fixed "devices.pm" to be able to handle device files with numbers
-	geater
-	  than 9 (ex: /dev/usb/lp10).
-
-	* standalone/printerdrake: 
-	  - Assure that Foomatic is installed before checking existing printer
-	queues.
-
-	* devices.pm: Fixes on device auto-detection:
-	  - Made USB printer auto-detection routine in "detect_devices.pm"
-	creating
-	the appropriate device nodes (needed for USB printers being recognized
-	  during installation).
-	  - Fixed "devices.pm" to be able to handle device files with numbers
-	geater
-	  than 9 (ex: /dev/usb/lp10).
-
-	* printer.pm: Added forgotten '$prefix'es.
-	Fixed:
-	  - Endless loop when entering printerdrake during installation in
-	recommended
-	mode without local printer
-	  - Printerdrake was not closed when one was in the "Add Printer"
-	sequence
-	  during installation and one clicked another installation item (entries
-	  on left hand side)
-	  - When configuring printing only after installation Printerdrake tried
-	to
-	  check the installed queues without Foomatic being installed (bug was
-	  already in 8.1, but noone discovered it).
-	  - CUPS died when one tried to add a (local) printer in recommended
-	mode
-	  after installation.
-	  - Improved text for the dialog telling that no local printer was
-	detected.
-	  - The list of auto-detected printers appeared as drop-down menu and
-	not as
-	  a list.
-
-2002/02/11  dam's  <damien@mandrakesoft.com>
-
-	* share/list: added modinfo
-
-	* network/netconnect.pm: added cancel for first step
-
-2002/02/11  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: fixed syntax error...
-
-	* Xconfigurator.pm: avoid testing fbdev driver.
-
-	* install_steps.pm: added Aurora or bootsplash for getting a need on frame
-	buffer.
-	added fbdev for GeForce Integrated.
-
-2002/02/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/vi.po, share/po/hu.po: updated Danish,
-	Hungarian and Vietnamese files
-
-2002/02/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: booh, fpons was faster than me on "bootsplash wanting
-	fb". Keeping my solution ;p
-
-	* c/stuff.xs.pm: "standard_charset" and "iconv" are needed even when C_RPM
-	is undefined
-
-	* any.pm: allow to edit the initrd field (thx to randy.k.wilson)
-
-	* install_any.pm (@needToCopy): add "ntp"
-
-2002/02/11  warly
-
-	* share/rpmsrate: remove dev from INSTALL, the sun is rising, and there
-	are no more needs to have ppp in the INSTALL section, as the darkness is
-	going away...
-
-2002/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: in case there is both ata66 (hde) and ata33 hard drives, go to
-	expert
-	questions directly (it would need a semi_auto asking on which drive the
-	bios
-	boots...)
-
-2002/02/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2002/02/09  daouda
-
-	* share/rpmsrate: 
-	  - add rfbdrake to NETWORKING_REMOTE_ACCESS and
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help.pm file
-
-	* share/po/fi.po, share/po/DrakX.pot, share/po/help_xml2pm.pl,
-	share/po/es.po, share/po/fr.po, share/po/sv.po, share/po/da.po,
-	share/po/de.po, share/po/hu.po, share/po/it.po, share/po/eu.po: merged
-	with the manual help
-
-2002/02/09  warly
-
-	* share/rpmsrate: add ppp in INSTALL
-	add dev in INSTALL
-
-2002/02/08  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_drakgw.png, pixmaps/wiz_default_up.png,
-	pixmaps/wiz_firewall.png, pixmaps/wiz_draknet.png: new gfx
-
-	* network/network.pm: corrected wireless modules
-
-2002/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales-skeleton.tar.bz2: Added choice of charset for
-	various languages
-
-2002/02/08  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/SHORTCUTS: add F1 & F2
-
-2002/02/08  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added instructions for scanning on HP's MF devices to
-	the printer help page.
-	HP PhotoSmart printers do not scan, so do not show how to scan with
-	them.
-	Do not let dialogs of network configuration correction appear embedded
-	in the "Add printer" wizard.
-	Completed wizard mode for adding a printer in both recommended and
-	expert mode.
-
-	* printer.pm: Enabled transferring queues of HP multi-function devices
-	between spoolers.
-	CUPS 1.1.13 dies on SIGHUP, do normal restart instead.
-	Completed wizard mode for adding a printer in both recommended and
-	expert mode.
-
-2002/02/08  warly
-
-	* share/rpmsrate: add bootsplash in system 4
-
-2002/02/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm: fix error causing a bad window sizing when there is
-	a horiz scroll
-
-2002/02/07  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: fixed shadow when testing X
-
-2002/02/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/help_xml2pm.pl: fixed email address
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - don't pop the "do you want to install samba?"
-	  - rwindow is not a window when embedded, so set_default_size only if
-	possible
-
-	* my_gtk.pm: make perl_checker happy
-	ensure no more than one child is in the Plug
-
-	* interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
-	* interactive_gtk.pm: fix error causing a bad window sizing when there is
-	a horiz scroll
-	(exit): ensure USR1 is sent to mcc
-
-	* Xconfigurator.pm: allow to edit the hsyncrange and vsyncrange when
-	choosing monitor "Custom"
-
-	* install2.pm, install_steps.pm: create and use miscellaneousAfter (so
-	that SECURE_LEVEL is set *after* asking)
-
-	* diskdrake/interactive.pm (Options): wrap the help text
-
-	* standalone/diskdrake: handle --embedded xxx xxx
-
-2002/02/07  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv, Makefile.config: add drakxtv (scantv gui)
-
-	* standalone/localedrake: fix pixel stuff: don't restart wm on cancel
-
-2002/02/07  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: beta 2
-
-	* printerdrake.pm: corrected wizard pb
-
-	* my_gtk.pm: wizard fixes
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): precise the type when mounting in standalone (for smb,
-	nfs would not need it)
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - don't pop the "do you want to install samba?"
-	  - rwindow is not a window when embedded, so set_default_size only if
-	possible
-
-	* interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
-	* my_gtk.pm: ensure no more than one child is in the Plug
-
-	* standalone/diskdrake: handle --embedded xxx xxx
-
-	* interactive_gtk.pm (exit): ensure USR1 is sent to mcc
-
-2002/02/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: removed ugly pink and ugly left bar for wizard mode
-
-2002/02/06  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, tools/oem-prepare: better handling of group linked
-	to hardware or options.
-
-2002/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: have frozen-bubble in GAMES at level 4
-
-2002/02/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/fi.po, share/po/DrakX.pot: updated French file
-
-2002/02/06  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Automatic configuration of the scanning part of HP's
-	multi-function devices.
-
-	* printerdrake.pm: Added some stuff for the Wizard mode.
-	Automatic configuration of the scanning part of HP's multi-function
-	devices.
-	Updated automatic package installation in printerdrake, no "kups" and
-	"qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
-	"rpmsrate" and "rpmsrate.server" appropriately.
-
-	* share/rpmsrate.server, share/rpmsrate: Added scanning packages to
-	INSTALL section, for HP MF device installation by printerdrake.
-	Updated automatic package installation in printerdrake, no "kups" and
-	"qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
-	"rpmsrate" and "rpmsrate.server" appropriately.
-
-2002/02/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
-	HP's multi-function devices.
-
-2002/02/05  dam's  <damien@mandrakesoft.com>
-
-	* standalone/logdrake: wizard updated
-	correction for mcc.
-
-2002/02/05  François Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate.server: synced with normal rpmsrate for Basque
-	management.
-
-	* install2.pm: auto_allocate for oem mode is not needed as oem script
-	create all necessary partition.
-
-	* install_any.pm: add support for Basque (no KDE).
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: newer syslinux 1.67.
-
-	* share/rpmsrate: add support for Basque (no netscape in such case)
-
-	* rescue/tree/etc/oem: select preferred kernel as kernel-\d.
-
-	* install_steps.pm: fixed logic, when someone want /root/drakx,
-	it has to check /root/drakx and not /root only.
-
-2002/02/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/sbin/modprobe: don't do insmod -f, it's not really necessary
-	and it taints the kernel (pabo)
-
-	* rescue/tree/etc/profile: use LD_LIBRARY_PATH in rescue so that PATH'ing
-	in /mnt
-	can really be used
-
-2002/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
-	* Xconfigurator.pm: testFinalConfig now always returns true if test is
-	skipped because of a bad_card (back to the old behaviour, this was no
-	good (the aim is to enable changing the monitor when test is skipped))
-
-	* share/po/fr.po: fix "Details" translated in "Détails de la partition"
-	but is used at different
-	place where the meaning has nothing to do with "partitions"
-
-2002/02/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
-	HP's multi-function devices.
-
-2002/02/05  warly
-
-	* share/compssUsers.server: remove non server group from rpmsrate.server
-	add utilities group in compssUser.server
-	(webmin,ssh-server,wizards,monitoring)
-
-	* share/rpmsrate.server: begin rpmsrate.server cleaning
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
-	* Xconfigurator.pm: testFinalConfig now always returns true if test is
-	skipped because of a bad_card (back to the old behaviour, this was no
-	good (the aim is to enable changing the monitor when test is skipped))
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: log the "chkconfig --del gpm" when there is a serial
-	mouse
-
-2002/02/04  dam's  <damien@mandrakesoft.com>
-
-	* standalone/logdrake: corrected typo. Yvounet, check your code!!
-	embedded, explain
-
-	* my_gtk.pm: bug correction
-
-	* standalone/drakfont, services.pm, network/netconnect.pm: applied cooker
-	guy english review
-
-2002/02/04  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added v4l module all the time (along with dbe already
-	present).
-
-2002/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: have numlock activated when isLaptop rather than
-	$o->{pcmcia}
-
-2002/02/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
-	share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po,
-	share/po/sr.po, share/po/el.po, share/po/et.po, share/po/sk.po,
-	share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
-	share/po/uk.po, share/po/eo.po, share/po/nl.po, share/po/wa.po,
-	share/po/sv.po, share/po/zh_TW.po: updated some po files
-
-2002/02/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix creating /etc/security/msec/server
-
-	* share/po/fr.po: fix "More" translation
-
-2002/02/04  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Made HP multi-function devices configured
-	with HPOJ being displayed correctly by printerdrake.
-
-	* detect_devices.pm: Replace "Hewlett-Packard" by "HP" when HP device is
-	detected on a parallel port.
-
-2002/02/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update french translations
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: force a few more "list"s instead of "combo" boxes
-	since "format" is now handled for combo boxes, combo boxes are used in
-	much too many places. Fix this by forcing type "list" for some cases,
-	and using type "list" when a ask_from has only one entry
-
-	* interactive.pm: since "format" is now handled for combo boxes, combo
-	boxes are used in much too many places. Fix this by forcing type "list"
-	for some cases, and using type "list" when a ask_from has only one entry
-
-	* bootloader.pm: 
-	  - fix some vga text modes 80x30
-	  - chmod 600 lilo.conf when a password is given
-	  - fix general "append"
-	(thanks to David Eastcott)
-	"password" works without "restricted", not the other way round (reported
-	by David Eastcott)
-	fix typo
-
-2002/02/03  warly
-
-	* share/rpmsrate.server: synchronize with current cooker rpmsrate
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: force a few more "list"s instead of "combo" boxes
-	since "format" is now handled for combo boxes, combo boxes are used in
-	much too many places. Fix this by forcing type "list" for some cases,
-	and using type "list" when a ask_from has only one entry
-
-	* interactive.pm: since "format" is now handled for combo boxes, combo
-	boxes are used in much too many places. Fix this by forcing type "list"
-	for some cases, and using type "list" when a ask_from has only one entry
-
-	* bootloader.pm: fix typo
-	help lilo when there is hdd with no hdc drive (needs testing!)
-
-2002/02/03  warly
-
-	* share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
-	compssUsers.server
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: help lilo when there is hdd with no hdc drive (needs
-	testing!)
-
-2002/02/03  warly
-
-	* share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
-	compssUsers.server
-
-2002/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: XFree is now 4.2
-
-	* standalone/fileshareset: fix dropping samba sections which don't have
-	any "path="
-
-2002/02/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/DrakX.pot: updated Swedish file
-
-	* share/po/fr.po: merged again French file to recover some lost strings;
-	and added non breakable spaces at all the needed places as required
-	by French typography
-
-2002/02/01  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm: please perl_checker
-
-	* install_interactive.pm: use from_Mb for choosing the size of the windows
-	partition
-
-	* install_steps.pm: create symlink /etc/security/msec/server in security >
-	3
-
-2002/02/01  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: First steps of the implementation for the "Add printer"
-	wizard.
-
-	* detect_devices.pm: Made auto-detection working for HP DeskJet 840C on
-	USB
-	General improvements for reliability of USB printer auto-detection
-
-2002/02/01  yduret
-
-	* pixmaps/wiz_scannerdrake.png: readding it with -kb option (i am still
-	jeune and boulet)
-	rm for readding with -kb option (i am jeune and boulet)
-
-	* standalone/logdrake: ergo fix thx dadou report
-	fix --explain=foo bug that prevent to show anything
-
-	* bootlook.pm: ergo fix thx dadou report...
-
-2002/02/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm, standalone/drakbackup, printerdrake.pm,
-	standalone/logdrake: changed some strings to make translation easier
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/01  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm: please perl_checker
-
-	* install_interactive.pm: use from_Mb for choosing the size of the windows
-	partition
-
-	* Xconfigurator.pm: testFinalConfig now returns false if test is skipped
-	because of a bad_card or
-	verybad_card and $skip_badcard is not set
-
-2002/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/keyboards.tar.bz2, keyboard.pm: Added Tamil language and
-	keyboard choices (KDE is translated to Tamil)
-
-2002/01/31  yduret
-
-	* pixmaps/wiz_scannerdrake.png: on rajoute la zolie image
-
-2002/01/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* Xconfigurator.pm: Added setting of model=jp106 for Japanese keyboard
-
-	* keyboard.pm, share/keyboards.tar.bz2: Added Bulgarian "phonetic"
-	keyboard
-
-	* lang.pm: Enabled "ms" language in the language selection list (there are
-	Gnome and KDE
-	translations for it)
-
-	* share/po/be.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
-	share/po/es.po, share/po/bg.po, share/po/de.po, share/po/et.po,
-	share/po/el.po, share/po/ru.po, share/po/br.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/nl.po, share/po/ro.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po:
-	updated some po files
-
-2002/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add gnome-core in GNOME (used to be required?)
-
-	* Xconfigurator_consts.pm, Xconfigurator.pm: move "what is the
-	running_window_manager" and "ask_window_manager_to_logout" to any.pm
-
-	* any.pm (ask_window_manager_to_logout, running_window_manager): created
-	from Xconfigurator and cleaned
-	(selectLanguage): if $langs is empty, don't ask for "other languages"
-
-	* pixmaps/wiz_printerdrake.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* standalone/localedrake: now works in normal user: it modifies the
-	~/.i18n (todo: handle kde crazy variables?)
-
-	* lang.pm: handle read'ing and write'ing to a specified file (useful
-	example: ~/.i18n)
-
-2002/01/30  sdupont
-
-	* standalone/drakbackup: complex merging....
-	change /var/drakbackup to /var/lib/drakbackup
-	crontab update
-	mail report update
-	sendmail update
-	require rpm mode
-	code optimisation
-	remove about gi
-	new help function
-
-2002/01/29  Till Kamppeter <till@mandrakesoft.com>
-
-	* pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
-	printerdrake.
-
-	* printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
-	wizard.
-	Improvements for the selection of a local printer, especially when no or
-	one printer was detected.
-
-2002/01/29  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: icons placements are better
-
-2002/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakbug_report, standalone/drakautoinst, install2.pm,
-	install_any.pm, install_steps.pm, log.pm, docs/README, pkgs.pm: move
-	/root/* files (ddebug.log, install.log, report.bug,
-	auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
-	and also save stage1.log there
-
-	* partition_table_raw.pm: add new pixel-made grub signature
-
-	* crypto.pm: update land2tzs accordingly to new url2land
-	Add url2land entries for nl, it, at
-
-	* any.pm: move /root/* files (ddebug.log, install.log, report.bug,
-	auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
-	and also save stage1.log there
-	rephrase a little bit highest level
-	to not refer to "level 4" anymore
-	use formatAlaTeX for describing security levels
-
-	* install_steps_interactive.pm: fix thanks to chipaux msg about mkbootdisk
-
-2002/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/sv.po, share/po/hr.po, share/po/de.po,
-	share/po/DrakX.pot, help.pm, share/po/it.po, share/po/eu.po,
-	share/po/es.po: updated pot file with help messages from manual
-
-2002/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: handle "format" for combo's
-
-	* bootloader.pm: use the new format for combo's to clean code handling
-	{vga} field
-
-	* diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
-	* any.pm: use the new format for combo's to clean code handling {vga}
-	field
-	handle the case where samba and/or nfs-utils are not installed
-
-	* install_steps.pm: move the various bootloader::add_append's in
-	setupBootloaderBefore
-
-	* diskdrake/smbnfs_gtk.pm: handle the case where samba and/or nfs-utils
-	are not installed
-
-	* install_steps_interactive.pm: visually unselect X and docs when minimal
-	install
-	"With X" choice is now working
-	handle "Cancel" on language selection
-
-2002/01/29  Till Kamppeter <till@mandrakesoft.com>
-
-	* pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
-	printerdrake.
-
-	* printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
-	wizard.
-	Improvements for the selection of a local printer, especially when no or
-	one printer was detected.
-
-2002/01/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* interactive.pm: fix pixel's minimal example using interactive.
-
-2002/01/29  yduret
-
-	* docs/interactive/ask_from_list, docs/interactive/wait_message,
-	docs/interactive/ask_from_treelist, docs/interactive/ask_from_listf,
-	docs/interactive/ask_from: added some snipet coe for example
-
-	* standalone/logdrake: logdrake is now under gi/perl-install/standalone
-
-2002/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
-	* install_steps.pm: move the various bootloader::add_append's in
-	setupBootloaderBefore
-
-2002/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: do the few new translations
-
-	* standalone.pm: try to reflect hierarchy for */*.pm
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
-	printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
-	share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
-	standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
-	share/po/id.po: Corrected various English typos
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo
-
-	* partition_table.pm: warn if partitions have been renumbered due to a
-	partition being added or removed
-
-	* diskdrake/interactive.pm: don't warn_if_renumbered during install
-	warn if partitions have been renumbered due to a partition being added
-	or removed
-
-2002/01/28  siegel
-
-	* share/po/de.po: new german version
-
-2002/01/28  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Replaced "sleep" commands by a subroutine which waits
-	exactly until CUPS is ready.
-	CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
-	is not "known" to it.
-
-	* printer.pm: Removed debug helper line.
-	Replaced "sleep" commands by a subroutine which waits exactly until CUPS
-	is ready.
-	CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
-	is not "known" to it.
-
-2002/01/28  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/br.po: update brezhoneg translations
-
-	* share/po/fr.po: more french translations
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
-	printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
-	share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
-	standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
-	share/po/id.po: Corrected various English typos
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo
-
-	* diskdrake/interactive.pm, partition_table.pm: warn if partitions have
-	been renumbered due to a partition being added or removed
-
-2002/01/28  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm, network/netconnect.pm: debug network testing
-
-2002/01/28  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated color of
-	scroll bar and reduced its size.
-
-	* bootloader.pm: fixed get_append if key=mem.
-	timeout passed to 10 instead of 5.
-
-2002/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: update games rates
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (remove_advertising): ensure removing /tmp/drakx-images
-	can't fail
-
-	* any.pm: simpler&nicer solution for writing kppprc in utf8
-	have kppprc strings in utf8
-
-	* detect_devices.pm: remove test code
-
-	* install_steps.pm, bootloader.pm: cleanup perImageAppend code (hopefully
-	handling nicely the mem=nopentium case)
-
-	* diskdrake/smbnfs_gtk.pm: don't use wait_message's when waiting (waiting
-	is usually very short), use a waiting cursor instead.
-	(the wait_message's were causing bad interactivity stuff)
-
-2002/01/27  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: add a minimal example
-
-	* services.pm: 
-	  - move the require on my_gtk to ask_standalone_gtk
-	  - cleanup
-
-	* Makefile.config: 
-	  - adapt to new diskdrake modules
-	  - add logdrake to STANDALONEPMS_
-
-	* my_gtk.pm: strange protection against ensure_focus generating a "focus"
-	event causing a
-	dead-loop (reminder: ensure_focus helps ensuring a widget is focused)
-
-	* Makefile.drakxtools, standalone.pm, Makefile, diskdrake_interactive.pm,
-	install_interactive.pm, diskdrake.pm: 
-	  - adapt to new diskdrake modules
-	  - some cleanup in drakxtools build
-
-	* diskdrake/removable.pm: remove debugging code
-	new diskdrake modules (diskdrake_interactive is now
-	diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
-	created from diskdrake.pm)
-
-	* diskdrake/interactive.pm, diskdrake/hd_gtk.pm,
-	diskdrake/removable_gtk.pm: new diskdrake modules (diskdrake_interactive
-	is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk,
-	others created from diskdrake.pm)
-
-	* diskdrake/smbnfs_gtk.pm: fix updating the actions
-	new diskdrake modules (diskdrake_interactive is now
-	diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
-	created from diskdrake.pm)
-
-	* network/nfs.pm: find_exports: add a timeout
-
-	* fs.pm: new function fstab_to_string
-
-	* standalone/diskdrake: handle --removable *and* --removable=<dev>
-	handle --removable=<dev>
-	  - new options --hd, --nfs, --smb, --removable
-	  - adapt to new diskdrake modules
-	  - save $all_hds->{current_fstab} to know if /etc/fstab must be saved
-
-2002/01/25  fabman
-
-	* share/po/es.po: updated spanish translation
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add devfsd
-
-	* install_any.pm: remove_advertising: use rm_rf since we don't have the
-	real list of files (the .pl's are not in @advertising_images)
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Less important options only shown when
-	"Advanced" button clicked.
-	Handling of cursor position in the main window improved.
-	Handling of empty printer queue list in main window improved.
-	Removed line breaks from longer texts, so that text flows into window
-	nicely
-	Minor text improvements.
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install_any.pm: advertising engine updated
-
-	* share/logo-mandrake.png: beta logo
-
-	* install_steps_gtk.pm: corrected decy
-	advertising engine updated
-
-2002/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: please find a better fix
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
-	linux
-	fix spelling
-
-	* Makefile: call clean-rpmsrate
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm, install_any.pm: advertising engine updated
-
-	* share/po/fr.po: typo
-
-	* share/logo-mandrake.png: beta logo
-
-2002/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: please find a better fix
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: ensure errors propagate
-
-	* bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
-	linux
-	fix spelling
-
-	* Makefile: call clean-rpmsrate
-
-	* mdk-stage1/pci-resource/Makefile: silly shell
-	ensure errors propagate
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po: typo
-	corrected too long label Mise à niveau deas paquetages seule. please
-	find a better FIX
-
-2002/01/25  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: cosmetic changes.
-
-	* pkgs.pm: fixed try opening to trigger changeCD callback.
-
-2002/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add msec in any install
-	  - use BIGMEM flag for kernel-enterprise
-	  - use SMP flag for kernel-smp
-	(those 2 goes together with Warly's clean-rpmsrate)
-	add flag DOCS which should work together with !excludedocs
-
-	* any.pm: ensure grub is installed if grub is chosen
-
-	* install_any.pm: 
-	  - add DOCS (based on !excludedocs)
-	  - set BIGMEM and SMP flags
-	(since kernel-smp and kernel-enterprise sub-numbers are better handled
-	by
-	 rpmsrate together with Warly's clean-rpmsrate)
-
-	* install_steps_interactive.pm, install2.pm: minimal install now handles
-	excludedocs
-
-	* install_steps.pm: log excludedocs
-	minimal install now handles excludedocs
-	put devfs=mount only if devfsd is installed
-
-	* diskdrake_interactive.pm: truncate lvm name to 63 characters since
-	longer vg names are not allowed
-
-2002/01/24  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm, printer.pm, printerdrake.pm: Fixed bug of empty menu
-	entry appearing after adding a new printer.
-	Modified "Local Printer" dialog to be more newbie-friendly.
-
-2002/01/23  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: updated speedtouch code to use pppoa3
-
-	* my_gtk.pm: removed font loading
-
-2002/01/23  François Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: fixed to allow multiple mem=xxx parameter (especially
-	mem=nopentium).
-
-	* install_steps.pm: restored mem=nopentium.
-	removed mem=nopentium.
-
-2002/01/23  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: name mangling max length set to 12
-	use name mangling for samba labels
-
-2002/01/23  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: New user interface in main window
-	More printer info in printer modification window
-	Better support for remote CUPS printers
-
-2002/01/22  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: improved widget_icons
-
-	* install_steps.pm: added net_cnx_pg output when configuring network in
-	auto install
-
-2002/01/22  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added support to save already existing synthesis file.
-
-	* install_any.pm: changed code to build synthesis file, check if they have
-	not already been copied
-	from mirror, or build them using parsehdlist.
-
-2002/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: Translate a few things more
-
-2002/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: cleanup error messages (and fix diskdrake's)
-	defaults to ext3 instead of ext2
-
-	* interactive.pm: add "quit_if_double_click" and "tree_expanded" flags
-	(request from till)
-	add feature "allow_empty_list" for "list" entries (disables the special
-	cases for 0 and 1 element lists)
-
-	* install_any.pm, diskdrake.pm: cleanup error messages (and fix
-	diskdrake's)
-
-	* install_interactive.pm, raid.pm: defaults to ext3 instead of ext2
-
-	* partition_table.pm: remove unused auto_win_extended stuff
-	handle extended partitions with no partitions inside (esp. for the first
-	hda5 & windows XP)
-
-	* bootloader.pm: 
-	  - fix default not being formatted like labels for lilo
-	  - check the label is not already used *case-sensitively*
-	  - check a kernel_or_dev is given
-
-	* any.pm: 
-	  - remove the default entry when that entry is removed
-	  - use allow_empty_list for displaying the entries
-	  - fix default not being formatted like labels for lilo
-	  - check the label is not already used *case-sensitively*
-	  - check a kernel_or_dev is given
-
-	* fsedit.pm: yet again better error reporting
-	defaults to ext3 instead of ext2
-
-	* standalone/drakboot, bootlook.pm: fix yves's code duplication of
-	lilo_choice (use $::lilo_choice in bootlook)
-
-	* interactive_gtk.pm: add "quit_if_double_click" and "tree_expanded" flags
-	(request from till)
-
-	* install_steps_interactive.pm: cleanup error messages (and fix
-	diskdrake's)
-	better messages for the minimal installs
-
-	* standalone/diskdrake: yet again better error reporting
-	cleanup error messages (and fix diskdrake's)
-
-	* share/rpmsrate: move mandrake-mime from SYSTEM to X
-	lower sndconfig
-
-2002/01/22  fcrozat
-
-	* share/rpmsrate: Really install gnome control center when installing
-	GNOME
-
-2002/01/22  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: added mem=nopentium for any Athlon or Duron processor.
-
-2002/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Makefile: exclude standalone from testing
-
-	* share/po/fr.po: resolve small conflict
-
-2002/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: add the new "mii" module to 'net_raw'
-
-	* install_steps_interactive.pm: better messages for the minimal installs
-	fix a few cancel's (reported by slegros)
-	don't ask security level in non-expert
-
-	* install_steps_gtk.pm, install_interactive.pm: fix a few cancel's
-	(reported by slegros)
-
-	* share/rpmsrate: move mandrake-mime from SYSTEM to X
-	lower sndconfig
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
-	* install_steps_interactive.pm, install2.pm: can't call
-	any::config_libsafe so early during install, move it where msec is
-	called
-
-	* any.pm: quiet perl's warning
-
-2002/01/21  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm: fixed network conf in auto install
-	corrected network down
-
-	* my_gtk.pm: removed debug print
-	icons widget improvment : icon placment, highlighting
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: increase the size of the "Choose action" box
-
-	* diskdrake_interactive.pm: remove the "Active" partition feature
-
-	* interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
-	* install2.pm: can't call any::config_libsafe so early during install,
-	move it where msec is called
-
-	* install_steps_interactive.pm: can't call any::config_libsafe so early
-	during install, move it where msec is called
-	cleanup, update, enhance security level choice
-
-	* standalone/draksec: cleanup, update, enhance security level choice
-
-	* install_steps.pm: remove deprecated msec groups adding
-	cleanup
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: newer grub
-
-	* any.pm: quiet perl's warning
-	cleanup, update, enhance security level choice
-	when creating users, add handling of xgrp/rpm/adm/wheel groups in high
-	security
-	fix advice about "usermod -G"
-
-	* tools/i386/netboot/menu.lst.example: add gateway parameter
-
-2002/01/21  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new ugly icon
-
-	* install_steps.pm: corrected network down
-
-2002/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: add helvR12_iso15
-
-	* install_steps_interactive.pm: """ When I choose a / partition smaller
-	than 200 MB, the installation
-	gives me an error message complaining that my system does not
-	    have enough free space for the installation, although basesystem
-	install
-	    require less than 100 MB. """
-	up to around 250MB, minimal install is chosen.
-	questions are: base system only, or no X, or normal.
-
-2002/01/21  siegel
-
-	* share/po/de.po: updates
-
-	* standalone/drakbackup: fixed i18n bugs
-
-2002/01/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: call msec with run_commands=0 to fix the network reloading
-	(causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakbackup: sorry, _("$_") is not allowed
-
-2002/01/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix "`msgid' and `msgstr' entries do not both end with
-	'\n'"
-
-	* install2.pm: call msec with run_commands=0 to fix the network reloading
-	(causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20  yduret
-
-	* timezone.pm: added Italy (time.ien.it) in
-
-2002/01/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: Rework English syntax in drakbackup - hopefully
-	I've got the intent correct ;^)
-
-2002/01/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm: Replaced USB printer auto-detection by a more
-	reliable method.
-
-2002/01/18  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: changed Update -> Upgrade for installation
-	class.
-
-2002/01/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/draknet: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - fix an english typo, s/connexion/connection/
-
-	* standalone/drakgw: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - write higher-level 'explanations'
-	  - small fix, s/`ls ..`/glob(..)/
-
-	* standalone/scannerdrake: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - fix a small english problem
-
-	* share/po/fr.po: reduce a lot of fuzzy and untranslations
-	large stuff from printerdrake, drakbackup and drakfont still to do :-)
-
-	* c/stuff.xs.pm, standalone/printerdrake, standalone/net_monitor,
-	standalone/drakautoinst, standalone/keyboarddrake,
-	standalone/localedrake, standalone/livedrake, standalone/drakboot,
-	standalone/draksec, standalone/tinyfirewall, standalone/mousedrake,
-	standalone/drakxservices, standalone.pm, standalone/drakproxy,
-	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
-	standalone/drakxconf, log.pm, standalone/logdrake,
-	standalone/drakbackup, standalone/drakfont: 
-	  - write the 'common' part of the 'explanations' stuff,
-	with nice help from Pixel for the tough Perl part
-	  - move 'use standalone' up in all standalone apps,
-	  to comply to 'explanations'
-
-2002/01/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2,
-	share/fonts.tar.bz2: changes to get in line with new XFree86
-
-2002/01/18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
-	locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: add update flag for urpmi medium.
-
-	* install_steps_interactive.pm: even if user cancel update of package on
-	tree, allow urpmi to install the medium.
-	avoid downNetwork as no difference are made between ethernet or ppp.
-	fixed typo.
-	allow cancel when installUpdates.
-
-	* crypto.pm: add update medium for crypto for urpmi (flag update).
-	fixed typo.
-	allow selection/deselection of update medium (for cancel of
-	installation).
-
-	* install_steps_gtk.pm: allow choosePackageTree to display a cancel if a
-	specific medium has been given.
-
-2002/01/18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
-	locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18  sdupont
-
-	* standalone/drakfont: update warning messages (qa).
-
-	* standalone/drakbackup: fix traduction problems and more ...
-
-2002/01/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm, diskdrake_interactive.pm: better error message when auto
-	allocate doesn't do anything
-
-2002/01/17  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm, network/netconnect.pm: draknet : success message only
-	if success
-
-	* my_gtk.pm: added timeout for redrawing icon widget
-
-2002/01/17  fcrozat
-
-	* share/rpmsrate: kdebase-nsplugins will be installed by default when
-	selecting KDE
-
-2002/01/17  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid upgrading a package by selection on files unless it has
-	been obsoleted.
-
-2002/01/17  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: check the mountpoint is valid for encrypting (disallow "/"
-	and "/usr")
-
-	* fsedit.pm, diskdrake_interactive.pm: better error message when auto
-	allocate doesn't do anything
-	check the mountpoint is valid for encrypting (disallow "/" and "/usr")
-
-	* fs.pm: do not create /swap
-
-	* services.pm: move service apcupsd from Printing to System
-
-	* bootloader.pm: fix many disks bios remapping (esp. booting on scsi when
-	ide is present)
-
-2002/01/17  sdupont
-
-	* standalone/drakbackup: stable version for qa pkg.
-	(without unstables options)
-
-2002/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix cancel on scsi module loading
-
-2002/01/16  sdupont
-
-	* standalone/drakbackup: update send mail.
-	(pixel mode. ;))
-
-2002/01/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: installUpdates: use formatAlaTeX
-
-2002/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix cancel on scsi module loading
-
-	* install_steps_interactive.pm: don't drop default_packages in "Base
-	system only"
-
-	* standalone/fileshareset: add locking to ensure things are in a proper
-	state
-
-2002/01/15  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: advertising engine amelioration
-
-	* my_gtk.pm: automatic icon placement in icon_labels_widget
-
-2002/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: remove the test trick
-	encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
-	diskdrake.pm: encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-2002/01/15  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn_consts.pm: updated
-
-2002/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: remove the test trick
-	encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
-	diskdrake.pm: encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* any.pm: have ddcxinfos take the best result of every run
-
-2002/01/15  sdupont
-
-	* standalone/drakfont: fix progress bar problem.
-	some gi updates:
-	  - windows font importation.
-	 - advanced font importation.
-	 - licence interface.
-	 - ...
-
-	* standalone/drakbackup: new ./drakbackup --show-conf
-	fix daemon problem (media to use).
-	update informations on drakbackup report mail.
-	__ 3290 lines.
-	man pages fr created.
-	some code cleaning on backend mode. (all_user_list && return_path)
-	new functions on backend mode:
-		- show-conf
-		- debug
-	        - help
-	        - version.
-
-2002/01/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - eata is SCSI adapter, not 'disk' adapter
-	  - have eata module in boot floppies
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: we need also "big" modules in
-	pci ids
-
-	* share/rpmsrate: have lbreakout weigthed 4 instead of 2
-
-	* mdk-stage1/modules.c: suggest other.img in file-not-found-in-archive
-	(sugg David Faure
-	and Pixel)
-
-2002/01/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo (making auto installs working again)
-
-2002/01/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: s/lbreakout/lbreakout2/
-
-	* install_steps_interactive.pm: cleanup
-
-2002/01/13  sdupont
-
-	* standalone/drakbackup: some updates ...
-	in "more option" steps user could choose to receive a report by mail for
-	each backups.
-	ftp backup work.
-	fix time problems.
-	remove doc from file.
-	security fix for configuration file.
-
-2002/01/11  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: advertising engine works !
-	champagne.
-	still some display bugs, but they will be corrected later.
-	need new ads and adequat description file
-	new advertising engine
-
-	* install_any.pm: modifications for new avertising engine
-
-	* my_gtk.pm: new icons placement
-
-2002/01/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po,
-	share/po/tr.po, share/po/ar.po, share/po/az.po, share/po/eu.po,
-	share/po/sl.po, share/po/vi.po, share/po/eo.po, share/po/wa.po,
-	share/po/sv.po, share/po/zh_TW.po, share/po/Makefile, share/po/af.po,
-	share/po/it.po: updated Spanish file; merged help-* files
-
-2002/01/11  sdupont
-
-	* standalone/drakbackup: update header pixmaps.
-	correction of message problem.
-
-	* pixmaps/drakfont.620x57.png, pixmaps/BDO-drakebackup1.png,
-	pixmaps/drakbackup.540x57.png: update pixmaps for drakbakup & drakfont.
-
-	* standalone/drakfont: update header pixmaps.
-
-2002/01/10  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: domainname corection
-
-	* network/network.pm: domainname corection
-	corrected network domainname pb
-
-	* install2.pm: corrected read_resolv => read_conf
-
-2002/01/10  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: english taste inspired by daminette.
-
-2002/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/lsparts: better looking output of type of partition (%x => %0x)
-
-2002/01/09  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, standalone/net_monitor, standalone/draknet,
-	network/network.pm, network/modem.pm, network/netconnect.pm: big merge
-	from update 8.1 with cvs
-	First part. Part 2 following
-
-	* my_gtk.pm: added bold option in text creation. Some corrections
-
-	* install_steps_interactive.pm: corrected fpons typo
-
-2002/01/09  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-	fixed stupid.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/08  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: cosmetik
-
-2002/01/08  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: added eval around pixmap drawing for advertising.
-
-2002/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakbackup: another round of bad use of _() fixes.
-	fixed bad use of _().
-
-2002/01/08  sdupont
-
-	* standalone/drakbackup: drakbackup work ...
-	incremental backup and restore work.
-
-2002/01/08  François Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-	* standalone/drakautoinst: removed stupid invocation of _("$_"), is it
-	correct code to change it to $_ only ?
-
-2002/01/08  François Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-	* standalone/drakautoinst: removed stupid invocation of _("$_"), is it
-	correct code to change it to $_ only ?
-
-2002/01/08  François Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-2002/01/07  François Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-2002/01/07  François Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-2002/01/07  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: socmetic
-	typo
-	added debug mode for the whole install
-
-	* my_gtk.pm: removed print
-	new pack_start functions, powerpack sub added (code from adrien)
-	incorporated adrien's code to generalize pack functions
-	minor bug fixes
-
-	* install_steps.pm, network/netconnect.pm: corrected network connection
-	during install
-
-	* install2: added debug mode for the whole install
-
-2002/01/07  François Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-	* Makefile: fixed overwriting of install2 filtering, keep diagnostic and
-	strict for debug mode.
-
-2002/01/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: also log server name for HTTP install
-
-2002/01/04  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, install_steps.pm, network/tools.pm, my_gtk.pm,
-	network/netconnect.pm: corrected minor bugs in network (among others bug
-	"modifying read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-
-2002/01/04  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected minor bugs in network (among others bug "modifying
-	read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-	corrected font display : no useless font->height, but ascent + descent
-	updated
-
-	* network/isdn_consts.pm: changed asus isdn hisax identify
-
-	* network/adsl.pm, install_steps.pm, network/tools.pm,
-	network/netconnect.pm: corrected minor bugs in network (among others bug
-	"modifying read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-
-2002/01/04  François Pons  <fpons@mandrakesoft.com>
-
-	* http.pm, install2.pm, steps.pm, install_any.pm: added update
-	installation support to install (big modifs need testing).
-
-	* pkgs.pm: allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* crypto.pm: removed test code.
-	allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps_interactive.pm: removed obsoleted comment.
-	allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps_gtk.pm: fixed empty flat package selection when giving a
-	limit to medium.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps.pm: allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	fix for auto updates.
-	added update installation support to install (big modifs need testing).
-
-2002/01/04  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: enable easy patch-adding of pcitable and usbtable
-	entries
-
-2002/01/03  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: user can be equal to 500
-
-2002/01/03  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated code to create synthesis file (including
-	provides on files).
-
-2002/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ar.po: updated Arabic file
-
-2002/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, Xconfig.pm: save the output of ddcxinfos before
-	modprobe'ing i810fb, and use that output for Xconfig (when i810fb is
-	modprobe'd, ddc probe doesn't work anymore)
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: fix english messages
-
-	* share/rpmsrate: as asked by Vincent Danen, lower uucp and raise sudo
-
-	* pkgs.pm: prefer gcc-cpp
-
-	* interactive_gtk.pm, interactive.pm: toggle Advanced/Basic button
-
-	* any.pm: fix english messages
-	save the output of ddcxinfos before modprobe'ing i810fb, and use that
-	output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work
-	anymore)
-
-2002/01/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: changed @euro locales to plain names; now old currencies ones
-	are obsolete
-
-2001/12/31  sdupont
-
-	* standalone/drakfont: new fixed size and add a head pixmap (to update).
-
-	* standalone/drakbackup: lots of update ...
-	  - cron work.
-	 - backup incremental & normal work.
-	 - corrupted backup data files supported.
-	 - error messages updated.
-	 - aff list of backup data files pbs.
-	 - test all backup files before to restore it.
-
-2001/12/30  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
-	root reserved part is 0% (and not 5%)
-
-2001/12/30  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
-	root reserved part is 0% (and not 5%)
-
-2001/12/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectMouse): when selecting a usb mouse,
-	call setup_thiskind with
-	at_least_one=1 (so that pci_class probe is used and so unknown
-	serial_usb
-	recognised (cf ldetect))
-
-	* modules.pm (load_thiskind): allow $probe_type to be given, allowing
-	forced pci probe (unsafe)
-
-	* any.pm (setup_thiskind_backend): when at_least_one==1, try load_thiskind
-	forcing
-	pci_class probe when no modules is found.
-
-2001/12/28  sdupont
-
-	* standalone/drakbackup: update select data on backup cd
-
-2001/12/27  sdupont
-
-	* standalone/drakbackup: fix of user selection during restore step.
-			remove return_file_date.
-			change algo for incremental backup.
-
-2001/12/26  sdupont
-
-	* standalone/drakbackup: some gi corrections & update.
-	 incremental restore.
-
-2001/12/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: s/use pkgs/require pkgs/ since pkgs::versionCompare is
-	only used during install
-
-	* my_gtk.pm: export gtkcolor (used in install_steps_gtk)
-	make perl_checker happy
-
-2001/12/22  sdupont
-
-	* pixmaps/backup_bot.png, pixmaps/cdrom.png, pixmaps/backup_time.png,
-	pixmaps/backup_bot2.png, pixmaps/backup_left.png, pixmaps/net.png,
-	pixmaps/backup_hd.png, pixmaps/backup_title.png,
-	pixmaps/backup_left2.png, pixmaps/filedialog.png, pixmaps/hd.png,
-	pixmaps/backup_options.png, pixmaps/backup_net.png: remove old
-	drakbackup pixmaps files.
-
-	* pixmaps/ic82-back-up-16.png, pixmaps/ic82-discdurwhat-40.png,
-	pixmaps/ic82-tape-40.png, pixmaps/ic82-moreoption-40.png,
-	pixmaps/ic82-where-40.png, pixmaps/ic82-system-40.png,
-	pixmaps/ic82-others-40.png, pixmaps/ic82-systemeplus-40.png,
-	pixmaps/ic82-network-40.png, pixmaps/ic82-CD-40.png,
-	pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
-	pixmaps/ic82-users-40.png, pixmaps/ic82-dossier-32.png,
-	pixmaps/ic82-back-up-48.png: drakbackup designer icons.
-
-	* standalone/drakbackup: add pixmaps on backup step.
-	new designer pixmaps on drakbackup.
-
-2001/12/21  sdupont
-
-	* standalone/drakbackup: some update in file name parsing...
-	etc ...
-
-	* pixmaps/BDO-drakebackup1.png: drakbackup
-
-2001/12/20  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: API changed, so call changed
-
-	* share/logo-mandrake.png: new ayo logo
-
-2001/12/20  sdupont
-
-	* standalone/drakbackup: update the todo header
-	the REQUIRE header
-	& code cleaning
-	  - tar -cvf tarfilename --after-date="sept 1, 2000" /home
-	   l.380 incremental: date -> if already exist do find -m ... | tar ...
-	   non incremental: date + delete old before the backup
-	  - correct detection of backups during restore.
-	  - gi for other media during restore. hd-> ok
-	  - backend for build backup update and support
-	  incremental backups.
-	  - real incremental backup
-	update resore & help.
-
-2001/12/19  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: update graphical backend
-
-2001/12/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add dl2k.o (nic module) per request of nplanel
-
-2001/12/19  sdupont
-
-	* standalone/drakbackup: 
-	  - gi for other media during restore. hd-> ok
-	  - backend for build backup update and support
-	incremental backups.
-	  - real incremental backup
-	add other media source during restore.
-	  - update help & license.
-	  - code cleaning.
-	  - ask during whqt sys step if user want to backup critical
-	  files, like /etc/passwd /etc/group /etc/fstab
-	  - use preserve permissions during tar
-	  - begin of total backup step.( all partitions wanted, windows
-	partitions for example!)
-	  - remove replace mode (backup_*_version is enought)
-
-2001/12/18  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: fixed dam's sucking (syntax error only, code is
-	untested).
-
-2001/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix typos
-
-2001/12/18  sdupont
-
-	* standalone/drakfont: include new pixmap on main menu.
-
-	* standalone/drakbackup: sort lists in all lists selection.
-			correct use of incremental backup
-			parse of restore & system state.
-	fix restore user selection problems
-	fix build backup data selection problems
-	ect ...
-	drakbackup -> drakxtools.rpm
-
-	* pixmaps/ic-drakfont-48.png: drakfont pixmap...
-
-2001/12/18  yduret
-
-	* standalone/logdrake: fix console mode : exit now
-
-2001/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix typos
-
-2001/12/17  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: power graphical backend update : text is now
-	centered
-
-	* my_gtk.pm: power graphical backend update : text is now centered
-	updated new graphical backend
-
-2001/12/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm, standalone/drakgw: drakgw for gold
-
-	* tools/pcmcia_config.patch: remove permanently (using
-	patch_pcmcia_config.pl now)
-
-2001/12/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
-	tmpfs
-
-2001/12/17  sdupont
-
-	* standalone/drakbackup:
-	________________________________________________________________
-	DONE:
-	incremental backups have depends whith replace options.
-	     gtklist not maximized.
-	     restore mode.
-	     view date during restore
-	     view size of file, date & hours during backup on CD
-	________________________________________________________________
-
-2001/12/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
-	tmpfs
-
-2001/12/14  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new picture for 8.2.
-
-2001/12/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: change again way of selection
-	PCI entries :
-	what's in mar files --> what's given by modules (e.g. just
-	as update_kernel does)
-
-2001/12/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: use "askdisplay" to ask a question at begining of install
-	for what
-	display you want to use during install
-
-	* Makefile, tools/patch_pcmcia_config.pl: externalize patch_pcmcia_config
-	(from make_boot_img)
-	because we need it in perl-install/Makefile also
-
-	* mdk-stage1/rescue-gui.c, rescue/make_rescue_img, rescue/rescue-doc,
-	rescue/Makefile: have a bunch of Rescue documentation directly
-	available from the Rescue-menu following suggestions
-	by Denis among others
-
-2001/12/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: enable easy screenshot'ing
-	  - ensure /usr is formatted if / is
-	  - remove /var/lib/rpm if /var is kept
-
-	* common.pm, docs/README: enable easy screenshot'ing
-
-2001/12/12  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/make_rescue_img: larger rescue image on PPC to accomodate huge
-	xfs module
-
-	* bootloader.pm: mods to address new yaboot's lack of symlink ability, xfs
-	initrd load
-
-2001/12/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/stage1.h: support
-	"filename" in DHCP answers and give this
-	to stage2 as --kickstart parameter
-
-2001/12/11  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, keyboard.pm: finish journalled fs usage - PPC,
-	add "\n" keyboard.pm, new modelines
-
-2001/12/10  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added network package not present in @needToCopy
-	(package that may be installed
-	by DrakX to avoid re-asking of CD1).
-
-	* bootloader.pm: added safe guard against looping symlink.
-
-2001/12/10  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, bootloader.pm: 
-	  - fix bootloader::add_append
-	  - add handling of serial console
-
-	* http.pm, install_any.pm: enable http:// in auto_install file location
-
-2001/12/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
-	* install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
-	* bootloader.pm (suggest, add_kernel): much cleanup
-
-	* diskdrake.pm: fix call to fileshare_config
-
-2001/12/05  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: updateed logo
-
-2001/12/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile, mdk-stage1/pcmcia_/cardmgr.c: 
-	  - fix problems with sockets not initialized (disabling
-	hotplug support -> cardmgr handles sockets)
-	  - fix problems with PCMCIA net adapters now using PCI
-	  modules, by adding PCMCIA base code in `network.img'
-
-2001/12/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
-	* pkgs.pm (selectPackage): hard coded preference to simple kernel
-
-	* install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
-	* diskdrake.pm: fix call to fileshare_config
-
-	* steps.pm: createBootdisk now after setupBootloader (together with dumber
-	install_any::kernelVersion)
-
-	* network/tools.pm: fix missing ";" (thanks to Robert Fox)
-
-	* bootloader.pm (suggest, add_kernel): much cleanup
-
-	* fs.pm: fix type "smb" vs "smbfs", and handle options in fs::mount
-
-2001/12/05  sdupont
-
-	* pixmaps/backup_bot2.png: update pixmaps
-
-	* standalone/drakbackup: todo : scp ssl sftp rsync connections perl || c ?
-	done : bzip2 backup
-	merge
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: corrected pixmap path
-	corrected pixmap path
-
-	* Makefile.config: added drakbackup drakfont
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm, mdk-stage1/log.c, docs/README: save stage1.log and have it in
-	report.bug
-
-	* mdk-stage1/automatic.c, mdk-stage1/doc/TECH-INFOS: support shorter
-	versions of automatic keywords to beat problems with very long kernel
-	commandlines
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-	* c/stuff.xs.pm: floppy_info: add missing close(fd)
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: cleaner smbclient call
-
-	* install_steps.pm: re-enable supermount by default
-
-2001/12/04  sdupont
-
-	* pixmaps/backup_bot.png, pixmaps/backup_left.png: correct colors
-	problems.
-
-	* standalone/drakbackup: bzip2 ok for compression to see: decomp without
-	pbs whith tar.gz and tar.bz2
-	todo: update mode -> decomp + update tar file + recomp
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: re-enable supermount by default
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fix bad parsing of package to copy (when one doen't
-	exist anymore) in
-	postinstall_rpms directory.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: re-enable supermount by default
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: additional package for wlan
-
-	* network/tools.pm: corrected pipe reading
-
-2001/12/04  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: make sure lilo is installed on automatic mode.
-
-	* install_any.pm: fix bad parsing of package to copy (when one doen't
-	exist anymore) in
-	postinstall_rpms directory.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-	* mdk-stage1/modules.c: fpons is a sucking chief
-
-	* modules.pm, mdk-stage1/usb-resource/update-usb-ids.pl,
-	mdk-stage1/Makefile, mdk-stage1/.cvsignore, mdk-stage1/probing.c:
-	support install from USB CDROMS (using usb-storage)
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  sdupont
-
-	* standalone/drakbackup: last update... for cooker
-	drakbackup deamon -> ok
-	drakbackup cvs -> to do (only for /etc)
-	drakbackup wizard -> only last step
-	drakbackup cd -> device detection and ask for only iso file.
-	drakbackup net -> do rsync
-	drakbackup begin -> todo : update initial message
-	update help and about.
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: additional package for wlan
-
-2001/12/04  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: make sure lilo is installed on automatic mode.
-
-	* mdk-stage1/modules.c: fixed gégé sucking.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: fpons is a sucking chief
-
-2001/12/04  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: fixed gégé sucking.
-
-2001/12/04  sdupont
-
-	* standalone/drakbackup: update...
-
-2001/12/03  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed use gtk
-
-2001/12/03  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/updatehdlist: initial revision, simple way to update a local set
-	of medium from /RPMS.
-
-2001/12/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: typo of last commit (unused variable -> could not
-	compile)
-
-2001/12/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/hu.po, share/po/es.po: updated Hungarian
-	and Spanish files
-
-2001/12/03  sdupont
-
-	* standalone/drakbackup: update
-	option step.
-	write other file content.
-	restore gi.
-
-2001/12/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/12/01  sdupont
-
-	* standalone/drakbackup: do not include browser cache.
-
-2001/11/30  François Pons  <fpons@mandrakesoft.com>
-
-	* docs/spec-DrakX-8.0.html: added spec (forgotten for quite a long)
-
-2001/11/30  gbeauchesne
-
-	* partition_table_gpt.pm: 
-	  - cleanups from mainline
-
-	* modules.pm: Suckiness fixes from mainline (gc):
-	  - Do parse /proc/modules in reverse order
-	  - Fix "convert old scsi_hostadapter's to new probeall" scheme
-
-	* bootloader.pm: 
-	  - Don't forget to link the initrd to the real image in /boot/efi/ too
-	  - Remove DEBUG printouts in install_efi_boot_menu
-
-2001/11/30  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm, any.pm, Makefile.drakxtools, standalone/diskdrake,
-	Makefile.config, diskdrake.pm: fileshare should be ok, handle diskdrake
-	--fileshare, fix smb import
-
-2001/11/30  sdupont
-
-	* pixmaps/backup_left2.png: drakbackup pixmap
-
-	* standalone/drakbackup: backend mode-> ok for hd
-	we can use drakbackup !.
-	todo :
-		backend mode:
-			- net
-			- cd
-	
-		advanced mode:
-			- device detection (cd writer)
-	
-		wizard:
-			- end of this step.
-	
-		gi:
-			- option step in adnanced step to choice
-			for example tar.gz or tar.gz2 ...
-	update
-	restore step 1 & 2.
-	adv step -> ok
-	todo: wizard ...
-	little update!
-	
-	variables correction in advanced step.
-	wizard user question, sys question & daemon
-
-2001/11/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Remove linux_logo
-
-2001/11/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add wvlan_cs
-
-	* mdk-stage1/modules.c: remove unneeded handling of "alias
-	scsi_hostadapter"
-
-	* mdk-stage1/stage1.c: add another expert_third_party_modules at the end
-	of enabling-pcmcia-stuff
-
-2001/11/29  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: remove the export tree for nfs/smb feature, remove some
-	test code
-	tentative version with export/import nfs/smb tree (committed to have it
-	in CVS as the export tree is already deprecated)
-
-	* standalone/fileshareset: 
-	  - allow root to export everything
-	  - remove empty mntpoint (from smb)
-
-2001/11/29  sdupont
-
-	* standalone/drakbackup: just update....
-	advanced: users correction during save.
-	user pass, user login, path to save local or on host
-	          combo for network protocol.
-	wizrad:   already to do!
-	CDRW burn:     todo: devices detection (see to_fond_cd).
-	code cleaning.
-
-	* standalone/drakfont: cleanning code.
-
-2001/11/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - fix pixel sucks of not parsing /proc/modules in
-	reverse order
-	  - be more in sync regarding names of pcmcia drivers
-
-	* any.pm: add modules.conf in report.bug
-
-2001/11/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/zh_TW.po: updated Chinese file
-
-2001/11/28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (read_conf): fix "convert old scsi_hostadapter's to new
-	probeall"
-
-	* standalone/drakbackup: make check_what_user works
-
-	* standalone/fileshareset: better description
-	gr_mem in getgrent is space separated, not comma separated
-	add samba handling. Should be finished now :)
-
-2001/11/28  sdupont
-
-	* pixmaps/backup_bot2.png, pixmaps/quit.png: drakbackup pixmaps.
-
-	* standalone/drakbackup: no important changement!
-	clean code
-	update!
-	for gc & Warly: some fixes, correction of advanced, wizard and after
-	advanced steps.
-	the user have a better gestion during advanced step, the protocols ftp,
-	sftp, scp, rsync
-	are now include in advanced step..... etc ;-)
-	todo: when checkbuttonbox are clicked for user choice set it to 0 or 1
-	juste after.
-	clean code.
-	new after advanced step, correction of checkbuttons problems & new
-	pixmaps.
-
-2001/11/27  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: updated, cooker style
-
-2001/11/27  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: avoid problem of array reference badly evaluated.
-
-2001/11/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/mailchangelog.pl: beurk
-	changelog is at linux-mandrake not mandrakesoft
-
-	* install_steps.pm: i810 -> no FB at boot
-
-2001/11/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_gpt.pm (generate_guid): cleanup
-
-	* any.pm (setupBootloader): s/last/return/
-
-2001/11/27  sdupont
-
-	* standalone/drakbackup: advanced step...
-	update.
-	advanced mode ... and ...
-	read and use user list correctly, advanced step user list.
-
-	* pixmaps/hd.png, pixmaps/net.png, pixmaps/cdrom.png: pixmaps for
-	drakbackup.
-
-2001/11/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.rtl8139: add rtl8139 netboot file that works
-
-	* tools/i386/netboot/stage1.rtl8139: add rtl8139 netboot file that works
-	stage1/stage2 of rtl8139 didn't work
-
-2001/11/26  dam's  <damien@mandrakesoft.com>
-
-	* common.pm, my_gtk.pm: new features for new mcc
-
-2001/11/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: getAndSaveAutoInstallFloppy: don't die when output'ing
-	of
-	auto_inst.cfg is not possible
-
-2001/11/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: add $o->{excludedocs} feature
-
-	* Makefile.drakxtools: remove unneeded files (*.bs and .exists)
-
-	* interactive_gtk.pm: cleanup
-
-2001/11/26  sdupont
-
-	* standalone/drakbackup: new gi, advanced step.
-	update.
-	gawk cmds.
-	better use for read and save conf. file now on
-	/etc/draxtools/drakbackup/drakbackup.cfg
-
-	* pixmaps/backup_hd.png, pixmaps/backup_options.png,
-	pixmaps/backup_net.png, pixmaps/backup_time.png: png files for
-	DrakBackup.
-
-2001/11/25  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: first version. for the moment, only nfs.
-
-2001/11/25  sdupont
-
-	* standalone/drakbackup: update of read_conf_file and default mode.
-
-2001/11/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/es.po: updated Spanish and Danish files
-
-2001/11/24  sdupont
-
-	* standalone/drakfont: about...
-
-	* standalone/drakbackup: update
-	update gi ,build of system, user, other, options interfaces.
-	advanced step.
-
-2001/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: package for pcmcia is now called "pcmcia-cs"
-
-	* any.pm, detect_devices.pm: pcmcia: /var/run/stab is nor
-	/var/lib/pcmcia/stab
-	yes it probably doesn't bring anything valuable but it's
-	how life is :-)
-
-2001/11/23  sdupont
-
-	* standalone/drakbackup: radio buttons & information message.
-	change gi interface, include help, about and pixmaps (backup_*.png on
-	standalone/pixmaps directory)
-
-2001/11/22  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed loading of agpgart module for i810 card.
-
-2001/11/22  sdupont
-
-	* standalone/drakfont: about button & GPL license.
-
-	* standalone/drakbackup: update gi.
-	TODO: separate all the boxes.
-	include wizard and advanced in pixmaps.
-	update
-	notebook gi.
-
-2001/11/21  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
-	mdk-stage1/init-data/msgboot-blank.img.bz2,
-	mdk-stage1/init-data/msgboot.img.bz2: fixed typo in help.msg
-
-	* Xconfigurator.pm: hack for SiS 640 for laptop.
-
-	* install_any.pm: fixed install_urpmi to build a correct urpmi db.
-
-2001/11/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: i810fb
-	migrate pcmcia in drakx to use in-kernel version (only
-	for 2.4, though --> pcmcia in 2.2 no longer supported)
-
-	* install_steps_interactive.pm, Makefile, c/Makefile.PL: migrate pcmcia in
-	drakx to use in-kernel version (only
-	for 2.4, though --> pcmcia in 2.2 no longer supported)
-
-	* install2.pm: i810fb
-
-	* mdk-stage1/stage1.c, mdk-stage1/pcmcia_/lex_config.c,
-	mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/yacc_config.c,
-	mdk-stage1/pcmcia_/Makefile, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia_/pcmcia.h, mdk-stage1/pcmcia_/ds.h,
-	mdk-stage1/pcmcia_/probe.c: migrate to pcmcia support from kernel,
-	patching untouched imported
-	sources from pcmcia-cs-3.1.29, to ease further updates of vendor
-	code (start from a clean pcmcia_ subdir)
-
-2001/11/21  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (suggestions_mntpoint): if there's no server suggestion, use
-	the simple
-	one, so that 'simple' is the only one required when someone modifies
-	%fsedit::suggestions
-
-2001/11/20  gbeauchesne
-
-	* partition_table.pm: 
-	  - Add isEfi() to isOtherAvailableFS() test so that install doesn't
-	suggest
-	to format /boot/efi by default. That way, we could preserve (shame on
-	us)
-	  EFI boot partition generated by Windows XP 64 bits...
-
-2001/11/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c,
-	mdk-stage1/pcmcia_/bulkmem.h, mdk-stage1/pcmcia_/cardmgr.h,
-	mdk-stage1/pcmcia_/vg468.h, mdk-stage1/pcmcia_/driver_ops.h,
-	mdk-stage1/pcmcia_/i82365.h, mdk-stage1/pcmcia_/cirrus.h,
-	mdk-stage1/pcmcia_/version.h, mdk-stage1/pcmcia_/cistpl.h,
-	mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/cs_types.h,
-	mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/yacc_config.h,
-	mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/tcic.h,
-	mdk-stage1/pcmcia_/probe.c: Initial revision
-	version 3.1.29
-
-2001/11/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_stdio.pm: for po i can't use $ for string interpolation
-
-2001/11/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm, standalone/scannerdrake: Corrected English errors
-
-	* share/po/hu.po, share/po/cs.po: updated pot file
-	updated Czech and Hungarian files
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/af.po:
-	updated pot file
-
-2001/11/19  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (setupBootloader): fix typo
-	(setupBootloader): fix typo
-
-2001/11/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Last correction was wrong, reverted it.
-
-2001/11/19  yduret
-
-	* standalone/scannerdrake: added dynamic support
-
-2001/11/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: syntax cleanup
-	  - a little cleanup
-	  - in case there is both scsi and ide hard drives, go to expert
-	questions
-	directly (it would need a semi_auto asking on which drive the bios
-	boots...)
-
-2001/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* keyboard.pm: Added Swedish dvorak keyboard
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/help_xml2pm.pl, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/11/12  sdupont
-
-	* standalone/drakbackup: new backup tool.
-	backend_mode with options.
-	        begin interactive mode.
-
-2001/10/29  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: code correction
-
-2001/10/29  gbeauchesne
-
-	* rescue/list.ia64: 
-	  - Add xfs_repair and efibootmgr
-
-2001/10/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd
-
-	* modules.pm: here too
-	CDCEther looks good, I add it
-
-2001/10/29  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/pcmcia_config.patch: adapt for new pcmcia-cs
-
-2001/10/29  sdupont
-
-	* standalone/drakfont: Copyright (C)
-	correction of warning & code cleaning.
-	the end.... i think...
-	updated
-	uninstall interface & progress bar
-	uninstall interface : lists & progress bar
-	new progress bar update
-	todo: second list
-
-2001/10/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: cleaning
-
-2001/10/27  daouda
-
-	* devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module
-
-	* share/rpmsrate: 
-	  - increase icewm weight.
-
-2001/10/26  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst, standalone/drakfont: progress bar hack
-
-2001/10/26  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools
-
-	* partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end
-	on GPT
-
-2001/10/26  sdupont
-
-	* standalone/drakfont: updated.
-	search correct progress bar mode implementation.
-	updated
-	fix some bugs & interface progress implementation.
-	TODO:
-	progress before backend.
-		search if directory already exist before custom install.
-
-2001/10/25  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst: simple variables handled, code compression.
-	The new and shiny drakautoinst is coming. P|-|34R
-	The new drakautoinst is coming. P|-|34R
-
-	* pixmaps/mdk_logo.png: additional logo
-
-	* standalone/drakfont: code correction
-
-2001/10/25  sdupont
-
-	* standalone/drakfont: merge differents versions.
-	file sector, list of fonts for advanced install...
-	applications choice, license widget, help widget.
-
-2001/10/24  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: updated
-	updated
-	updated, lot of bugs.
-	updated
-
-	* my_gtk.pm: added set_editable
-
-2001/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h,
-	mdk-stage1/.cvsignore, rescue/install_bootloader,
-	rescue/tree/etc/rc.sysinit, rescue/Makefile,
-	mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile,
-	rescue/tree/etc/issue, rescue/make_rescue_img,
-	mdk-stage1/newt-frontend.c: 
-	  - add a GUI to the rescue
-	  - provide guessmounts with better efficiency and output, go to
-	console, and reboot
-	  - provide install_bootloader which runs lilo from /mnt if it seems
-	safe
-	  - add lsparts to rescue, which prints partitions with detected types
-
-2001/10/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: replace /initrd with /lib/initrd
-	(hds): in case of GPT, allow ext2 to be replaced by any kind of
-	partitions (esp. EFI)
-
-	* partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm,
-	partition_table_raw.pm: add methods first_usable_sector and
-	last_usable_sector
-
-	* fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd
-
-2001/10/24  sdupont
-
-	* standalone/drakfont: scroll
-	`
-	import_status & progress.
-	gi update.
-
-2001/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm: tagged as translatable some left out strigns
-
-2001/10/23  sdupont
-
-	* standalone/drakfont: gi update
-	doc and progress bar.
-	gui: install from directory
-	gui supported.
-
-2001/10/23  yduret
-
-	* share/po/fr.po: fixed fohtes grammar
-
-2001/10/22  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: speedtouch config : added usa vpi vci
-
-2001/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: oops forgot to umount after "updatemodules"...
-
-2001/10/22  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...)
-
-2001/10/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed connection device setting for "oki4w" driver.
-
-2001/10/19  gbeauchesne
-
-	* partition_table_gpt.pm: 
-	  - Use /dev/random through devices::make() instead of /dev/urandom
-	  - Localize file descriptor
-	  - Capitalize error message if no /dev/random found
-
-	* partition_table.pm: 
-	  - s/Win98 FAT32/FAT32/
-	  - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/
-	  - Add "FAT32" to @important_types for IA-64 & /boot/efi
-
-2001/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: small fix
-
-2001/10/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: OOize can_raw_add
-
-	* partition_table.pm: handle empty $hd->{primary}{raw} (happens with no
-	partitions on ia64)
-	  - raw_add, can_raw_add moved to partition_table_raw
-	  - using raw_removed
-
-	* partition_table_dos.pm: better handling of CHS overflow (mainly for non
-	cylinder-boundary aligned part (like ia64))
-
-	* partition_table_raw.pm (adjustEnd): in case the end is totalsectors,
-	don't adjust since totalsectors / cylinder_size may not be an integer
-	(zero_MBR): defaults to GPT on ia64
-	(raw_add, can_raw_add, raw_removed): created, can now be overloaded in
-	partition_table_*.pm's
-	(get_geometry): keep the total_sectors as given by c::total_sectors,
-	don't try to recompute it based on nb_cylinders (for hds where
-	total_sectors is not a multiple of nb_cylinders)
-
-	* common.pm: cleanup
-
-	* partition_table_gpt.pm: fix ending is last sector, not next one
-	add TODO for partition entry guid
-	  - writing partition table now works
-	  - creating a new partition table now works (except GUIDs generation)
-
-2001/10/18  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: corrected GET_FL and co
-
-2001/10/18  François Pons  <fpons@mandrakesoft.com>
-
-	* standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now
-	use rgb.txt instead).
-
-2001/10/18  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_gpt.pm: 
-	  - add checksum verif on partition entries
-	  - detect the type of partition since the partition table types seem
-	quite poor
-	read part of GPT partition table working
-
-	* fsedit.pm: 
-	  - add checksum verif on partition entries
-	  - detect the type of partition since the partition table types seem
-	quite poor
-
-	* partition_table.pm: read part of GPT partition table working
-	shorter GPT name
-
-	* detect_devices.pm: safer modprobe ide-floppy
-
-2001/10/18  sdupont
-
-	* standalone/drakfont: change Fontmap ghostscript file.
-	drakfont support now .gsf fonts
-	end of backend......
-	update
-
-2001/10/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: typo
-
-2001/10/17  sdupont
-
-	* standalone/drakfont: implementation of type1 fonts removing.
-	ghostscript, xfs and staroffice tested and supported.
-
-2001/10/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: correct bad level display
-
-	* standalone/interactive_http/Makefile: makes rpmlint happy
-
-2001/10/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: print checks
-
-	* rescue/tree/etc/rc.sysinit: better phrasing
-
-2001/10/16  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl,
-	rescue/list.ppc: typo in update kernel by /me
-	fine-tune sanity_check for ppc
-	move /dev/nvram from list.ppc to devices.pl
-
-2001/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/10/15  yduret
-
-	* scanner.pm: wonderful perl forgotten
-
-2001/10/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also
-	supported
-
-2001/10/12  sdupont
-
-	* standalone/drakfont: support all installations, and support xfs,
-	ghostcript, staroffice.
-	todo aplli: openoffice, gimp, abiword, netscape & other browsers...
-	todo or to see: --strong  ttmkfdir -c ???
-	emd of backend..
-
-2001/10/11  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: multiple card configuration bug corrected.
-	allelluia.
-
-	* network/tools.pm: aded use c
-
-	* standalone/drakfont: code review
-
-2001/10/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again
-
-2001/10/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom
-
-2001/10/11  sdupont
-
-	* docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
-	docs/drakfont/drakfont.dvi: clean directory..
-
-	* docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia,
-	docs/drakfont/dia_srcs/drakfont_uninstall.dia,
-	docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files...
-
-	* standalone/drakfont: improved....
-	improved && implement remove fonts for xfs
-	improved
-	improved
-	optimisation
-	correction of option install --replace
-	dialog of install options
-	correction of install option.
-
-	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg,
-	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg &
-	ps with -kb option
-	clean...2
-
-2001/10/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: typo
-	improved options handling
-
-	* standalone/net_monitor: ergo and features improvments, pipe handling
-	correction
-
-	* network/tools.pm: updated
-
-2001/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language
-
-2001/10/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: normalize the default type entry ("entry")
-
-	* interactive_gtk.pm: fix typo (on clicked_may_quit)
-
-2001/10/10  sdupont
-
-	* standalone/drakfont: option replace for "install from" &
-	windows_import...
-	update install dir
-	better for --install
-	new version of drakfont. in perl langage.
-
-	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux,
-	docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
-	docs/drakfont/drakfont.tex, docs/drakfont/Makefile,
-	docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi,
-	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs
-	drakfont
-
-2001/10/10  yduret
-
-	* standalone/scannerdrake: first apparition on earth..
-
-	* Makefile.config: added scannerdrake
-
-2001/10/09  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: removed trash
-	connection test is now in background, corrects the interface freeze
-	problem
-
-	* pixmaps/net_u.png: new pixmap for draknet/net_monitor
-
-	* standalone/net_monitor, standalone/draknet: connection test is now in
-	background, corrects the interface freeze problem
-
-2001/10/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2001/10/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: fix detecting read-only drives (like memory-sticks)
-
-	* partition_table.pm: make perl_checker happy
-
-	* partition_table_raw.pm: fix detecting read-only drives (like
-	memory-sticks)
-	make perl_checker happy
-
-	* modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care
-	of usb-storage if possible, so that patch on usb floppy works
-
-2001/10/09  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux
-	keycodes on PPC, add additional Apple modelines
-
-	* install_steps_interactive.pm: re-enable PPC bootloader setup
-
-2001/10/08  dam's  <damien@mandrakesoft.com>
-
-	* c/stuff.xs.pm: added FL_GET and FL_SET
-
-2001/10/08  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as
-	they have been
-	removed from the skip list for stage1.
-
-	* rescue/tree/etc/oem: added silly modification to avoid using more than 7
-	partition for DAC960 (/home
-	and /var are not created in the current state).
-
-2001/10/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: ia64
-
-	* mdk-stage1/Makefile: 8.1 -> cooker
-
-2001/10/08  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm, partition_table.pm: yet a few other ataraid cases
-
-2001/10/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* partition_table_raw.pm, partition_table.pm: updates to accomodate IBM
-	PPC systems with DOS partition table
-
-2001/10/05  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added (missing) creation of
-	/hd/boot/grub/device.map (needed for
-	CompactSmartArray).
-
-2001/10/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: kdegames : 2 -> 4
-
-2001/10/04  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fix (work around) parted problem when it refuse to
-	use all disk space for
-	partition.
-	added another psacct log file in touch.
-	fixed typo on scalar reference for psacct bug.
-	updated with 8.1 OEM ProSuite.
-
-	* tools/oem-prepare: updated with 8.1 OEM ProSuite.
-
-2001/10/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2001/10/04  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm: is little-endian, so use "V" instead of "I"
-
-2001/10/03  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: synced with oem script.
-	removed 3D games not installed by default.
-
-	* rescue/tree/etc/oem: fixed typo in produced patch.
-	added extension to pro suite CD (added kernel-enterprise to possibly
-	installable
-	and install kernel22).
-	removed 3D games not installed by default.
-	added missing xmms-arts.
-	allow halting.
-
-2001/10/03  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: yet another ataraid support patch
-
-2001/10/02  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix previous hack.
-	added hack to do "/sbin/depmod -a" for NVIDIA driver.
-
-2001/10/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: new pci-ids.h
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: better look
-
-	* share/po/fr.po: small fix
-
-	* standalone/drakgw: don't call pkgs_install when no package needs to be
-	installed
-
-2001/10/02  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: bloody ataraid detection
-
-	* devices.pm: ataraid devices support
-
-2001/10/01  François Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT.
-
-	* rescue/tree/etc/oem: added CHARSET support, removed kernel22 and
-	kernel-enterprise from list of
-	package installable in oem mode, added possibility to set language on
-	/etc/oem
-	script invocation.
-
-	* install_steps_interactive.pm: avoid chooseCD on oem install.
-
-	* install_steps_gtk.pm: avoid asking for changing CD on oem install.
-
-	* install_any.pm: use $boot_medium for default medium in oem install,
-	avoid using kernel22 or
-	kernel-enterprise in oem install (space available is too tight on CD oem
-	version).
-
-	* tools/oem-prepare: synced with oem script.
-
-2001/10/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects
-	what's in the marfiles
-
-2001/10/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2001/09/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* docs/README: New adress where to find the kernel BOOT
-
-2001/09/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/09/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/drvinst: don't install usb keyboard drivers more than once
-	try to fix usb keyboards
-
-2001/09/27  kjx
-
-	* share/po/zh_CN.po: translating
-
-2001/09/26  gbeauchesne
-
-	* install_any.pm: 
-	  - Suggest /boot/efi on IA-64 for the first VFAT partition found,
-	instead
-	of /mnt/windows
-
-	* bootloader.pm: 
-	  - bootloader.pm (suggest): don't search for dos (or windows) boot
-	partition
-	on IA-64 since ELILO can only boot Linux.
-	  - bootloader.pm (write_lilo_conf): don't cry if we don't have
-	/boot/boot.b
-	  or boot/message on IA-64.
-
-	* rescue/list.ia64: 
-	  - Add file list for "rescue" disk
-
-	* share/list.ia64, partition_table.pm: 
-	  - partition_table.pm: Add XFS suggestion for IA-64
-	  - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS
-
-2001/09/25  baudens
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/
-	Remove totally crazy translation.
-	Translators, please use your brain!
-
-2001/09/25  gbeauchesne
-
-	* partition_table.pm: 
-	  - Add ReiserFS and Ext3fs entries for IA-64
-
-2001/09/25  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): cleanup comments
-
-2001/09/25  warly
-
-	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
-	installed for newbie and drakfirsttime does not fail.
-	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
-	does not fail.
-
-2001/09/25  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: allow non ejectable medium to allow all
-	hdlists on the bootable medium.
-	make current boot medium already selected if multiple hdlist are on this
-	boot medium.
-
-2001/09/25  warly
-
-	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
-	installed for newbie and drakfirsttime does not fail.
-	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
-	does not fail.
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po: corrected translation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h,
-	mdk-stage1/disk.c: hd.img now detects partition types... backport from
-	DrakX :-)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount_part): fix for iso loopback mounted
-
-	* share/po/fr.po: fix
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/isdn.pm: type assignation bug fix
-	corrected type assignation
-
-	* share/po/fr.po: corrected bad translation
-
-	* standalone/draknet: corrected type assignation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
-	value)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount_part): fix for iso loopback mounted
-
-	* share/po/fr.po: fix
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: corrected isdn firmware
-
-	* network/adsl.pm, network/isdn.pm: type assignation bug fix
-	corrected type assignation
-
-	* share/po/fr.po: corrected bad translation
-
-	* standalone/draknet: corrected type assignation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
-	value)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix small error merging existing fstab
-
-	* share/po/fr.po: fix
-
-	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
-	for now)
-
-	* diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm: bug fix
-
-	* modules.pm: corrected isdn firmware
-
-	* network/isdn.pm, network/adsl.pm: type assignation bug fix
-	corrected type assignation
-
-	* standalone/draknet: corrected type assignation
-
-	* install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd
-	during install
-
-2001/09/24  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
-	problems reported with it.
-
-	* share/rpmsrate: allow rpm build for non expert who choose development.
-
-	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
-	packages).
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix small error merging existing fstab
-	add "iocharset=" for cdrom
-
-	* install_steps.pm: 
-	  - disable supermount by default
-	  - cleanup nsswitch.conf wins removing
-
-	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
-	for now)
-
-	* diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24  siegel
-
-	* share/po/de.po: new german version
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm: bug fix
-
-2001/09/24  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
-	problems reported with it.
-
-	* share/rpmsrate: allow rpm build for non expert who choose development.
-	removed any reference to XFree86-glide-module or Glide_XXX packages.
-
-	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
-	hash keys orders in
-	install_steps_interactive::chooseCD().
-
-	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
-	packages).
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: add "iocharset=" for cdrom
-
-	* install_steps.pm: 
-	  - disable supermount by default
-	  - cleanup nsswitch.conf wins removing
-
-2001/09/24  François Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: removed any reference to XFree86-glide-module or
-	Glide_XXX packages.
-
-	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
-	hash keys orders in
-	install_steps_interactive::chooseCD().
-
-2001/09/24  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: File permission settings during install were not done.
-	Fixed.
-
-2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: misc typo correction
-
-	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
-	* share/rpmsrate: simplify (for the moment)
-	do not force X flag, have it selected for any "Graphical Environment"
-
-	* share/compssUsers, install_any.pm: do not force X flag, have it selected
-	for any "Graphical Environment"
-
-2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2001/09/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
-	* fsedit.pm: add magic SWAPSPACE2
-
-	* bootloader.pm: allow bootloader on fat partitions
-
-	* share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag,
-	have it selected for any "Graphical Environment"
-
-2001/09/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version is 8.1
-
-2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated Bosnian file
-
-2001/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, install2.pm: 
-	  - cleanup noatime option setting
-	  - cleanup exec option setting (must noexec => 0 instead of exec => 1)
-
-	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2001/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added support for automatic /dev/... file permissions
-	setting by devfsd.
-	Improved matching of auto-detection results with database entries.
-	Given hint to the user to select the correct model when matching fails.
-
-	* printer.pm: Added support for automatic /dev/... file permissions
-	setting by devfsd.
-
-2001/09/21  François Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: avoid detecting plip for live upgrade.
-
-2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some
-	functionality is lost
-	small fix for "vn" keyboard (enable toggle key)
-
-	* share/po/ko.po: updated Korean file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* printerdrake.pm: small fix
-
-2001/09/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: When one changes the driver of a freshly
-	added printer, the cursor was not pointed to the old driver, fixed.
-	Fixed paper size not set according to chosen language during
-	installation.
-
-2001/09/21  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: typo
-
-2001/09/21  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: reworked medium management.
-	moved com_license to parent package (as code that show the license is
-	now
-	available even for non gtk install).
-
-	* Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade.
-
-	* pkgs.pm, install_any.pm: reworked medium management.
-
-	* detect_devices.pm: avoid detecting plip for live upgrade.
-
-	* install_steps_interactive.pm: avoid keeping testing code.
-	reworked medium management.
-	added code to support changeable cdrom, set a unique copy of license for
-	installing commercial application as package variable (exported).
-
-2001/09/21  gbeauchesne
-
-	* share/po/no.po: remove trailing '\n'
-
-2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po, share/po/no.po: updated pot file
-	updated pot file
-	updated Norwegian and Hungarian files
-	updated pot file
-
-	* help.pm: updated help file
-
-	* share/po/help_xml2pm.pl: updated pot file
-
-	* printerdrake.pm: small fix
-	changed text strings to be more translator friendly
-	(NEVER EVER cut a phrase)
-
-	* share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file
-	updated pot file
-	corrected extra \n
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-	updated pot file
-	updated pot file
-
-	* keyboard.pm: adapted keyboard priority numbers (it is useless to give a
-	multichoice with a
-	value higher than 90)
-
-	* share/po/zh_TW.po: updated pot file
-	updated pot file
-
-2001/09/21  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: write password in lilo.conf even if it's also done by
-	msec, otherwise lilo will fail with restricted only
-
-	* install_steps.pm: Ensure $o->{superuser}{name} is temporary
-
-	* share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for
-	libsafe and kernel22-secure
-
-2001/09/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Added a forgotten "_( ... )".
-
-2001/09/21  warly
-
-	* share/rpmsrate: add gnomemeeting and openmcu
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
-	flag modifications in
-	diskdrake do not escape from diskdrake
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	check bad blocks for xfs and jfs
-
-2001/09/20  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't reapply the conf, if already applied.
-	usefull for dhcp, because the network should be restarted after
-	configured
-
-	* network/adsl.pm: test if microcode is there
-
-	* bootlook.pm: removed blocking die
-
-2001/09/20  fcrozat
-
-	* share/rpmsrate: Add gnome-user-docs to GNOME install
-	Install Mdk eazel engine for gnome
-
-2001/09/20  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
-	this cause
-	problem in live_upgrade.
-
-	* Xconfigurator.pm: added VideoRam for ET 6x00 card.
-
-	* network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: misc
-
-2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/cs.po: updated Czech file
-
-	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
-	Chinese and Dutch files
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
-	flag modifications in
-	diskdrake do not escape from diskdrake
-
-	* share/rpmsrate: raise i18n fonts
-
-	* fsedit.pm (hds): do a get_major_minor where needed
-
-	* lang.pm: replace xcin by chinput as per Alex request
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	check bad blocks for xfs and jfs
-
-2001/09/20  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed flow of the program for the "recommended" mode of
-	the installation.
-
-2001/09/20  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't reapply the conf, if already applied.
-	usefull for dhcp, because the network should be restarted after
-	configured
-
-	* mouse.pm: text positionning
-
-	* standalone/net_monitor: less gethostbyname
-
-2001/09/20  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
-	this cause
-	problem in live_upgrade.
-
-	* network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
-	Chinese and Dutch files
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: raise i18n fonts
-	s/telnet-server/telnet-server-krb5/
-
-	* fsedit.pm (hds): do a get_major_minor where needed
-
-	* fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type
-
-	* lang.pm: replace xcin by chinput as per Alex request
-
-	* printerdrake.pm: back out the modif from till as asked by till
-
-2001/09/20  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Make it possible to configure more than 1 printer in a
-	"recommended" mode installation.
-
-2001/09/19  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
-	restart at better place
-
-2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: updated pot file
-	updated help xml
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
-	share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
-	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po:
-	updated help xml
-
-	* share/po/wa.po: updated pot file
-	updated pot file
-
-2001/09/19  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
-	restart at better place
-
-2001/09/19  fcrozat
-
-	* share/rpmsrate: Add mdk-eazel-engine
-
-	* share/po/fr.po: Fix french mistakes
-
-2001/09/19  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added code to check if package are really installed.
-
-	* Xconfigurator.pm: Rage 128 doesn't like XF3 at all.
-	make only bad card Riva128 for testing XF4.
-	Riva128 is now a bad card.
-
-2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: raklet quoting
-
-	* share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19  Pixel  <pixel@mandrakesoft.com>
-
-	* loopback.pm (create): don't use seek to create big files otherwise you
-	get hole and
-	swapon doesn't like it
-
-	* any.pm (ask_users): default icon "man"
-
-	* lang.pm: compatibility with older $o->{lang} names (for auto_installs)
-
-	* install2.pm: initial support for server install
-	compatibility with older $o->{lang} names (for auto_installs)
-
-	* install_steps_gtk.pm: initial support for server install
-
-	* printerdrake.pm: help perl_checker
-
-	* pkgs.pm, share/rpmsrate, install_any.pm: 
-	  - gmc instead of nautilus for non-latin1 installs
-	  - introduce CHARSET flag and use it
-
-2001/09/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Network is now only required (and checked) for remote
-	printers.
-	Several buglets fixed in remote CUPS server dialog.
-
-	* printerdrake.pm: Removed a forgotten debug help line from the code.
-	Fixed typo in dialog text of high/paranoid security.
-	Network is now only required (and checked) for remote printers.
-	Several buglets fixed in remote CUPS server dialog.
-
-2001/09/18  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't ask to connect if lan or dhcp
-
-2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: don't create bootdisk by default
-
-	* share/po/fr.po: misc
-
-2001/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
-	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
-	installs
-
-2001/09/18  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch
-
-	* network/netconnect.pm: don't ask to connect if lan or dhcp
-
-	* standalone/drakgw: debug
-
-2001/09/18  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added X group with SYSTEM.
-	finally work arounded rpm bug by flepied.
-
-	* detect_devices.pm: added back full pci probe for stage2 command lspci.
-	removed full pci probe for stringlist (used for generating report_bug).
-
-	* install_steps_interactive.pm: now finally really fixed printer label in
-	summary dialog.
-	fixed printer description in summary (again).
-	fixed no printer displayed (at least, print Remote CUPS server).
-
-	* commands.pm: make lspci a full pci probe instead of safe pci probe.
-
-2001/09/18  gbeauchesne
-
-	* Xconfigurator.pm: 
-	  - Force XFree 4 on IA-64. No XFree 3.3.X there...
-
-	* tools/ia64/elilo.efi: 
-	  - elilo 3.1
-
-2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: don't create bootdisk by default
-
-	* standalone/drakautoinst: have "manual" and "replay" translated
-
-	* share/po/fr.po: misc
-
-2001/09/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files
-
-2001/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2: 
-	  - remove ISO-8859-5, KOI8-R and KOI8-U
-	  - cleanup packdrake extracting locales
-	  - cleanup/fixes lang.pm
-
-	* install_steps.pm: fix setting kdmrc for latin1
-
-	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
-	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
-	installs
-
-2001/09/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/list: updated for rpm 4.0.3.
-
-	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
-	"rpm --root" but need more testing.
-
-	* standalone/XFdrake: removed comment.
-	added support to configure NVIDIA driver if everything is correctly
-	installed.
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, fsedit.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-
-2001/09/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
-	in expert install.
-
-2001/09/17  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: no expert mode needed to choose gateway
-
-2001/09/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/list: updated for rpm 4.0.3.
-
-	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
-	"rpm --root" but need more testing.
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-	* Xconfigurator.pm: deactivating bad card test (too).
-
-	* standalone/XFdrake: removed comment.
-	added support to configure NVIDIA driver if everything is correctly
-	installed.
-
-2001/09/17  odin
-
-	* share/po/fr.po: updated fr.po
-
-2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting
-	English language but also euro symbol can choose it.
-	fixed Belgian keyboard
-
-	* share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and
-	Wallon files; corrected error syntax in French file
-
-	* lang.pm: Added choice of "English|Ireland (euro)" so people wanting
-	English language but also euro symbol can choose it.
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-	(mount): do not hand update /etc/mtab for nfs mounts, already done by
-	mount(8)
-	(set_default_options): disable iocharset= and codepage= for supermount
-
-	* partition_table.pm (adjust_main_extended): do not use linux extended
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-	* standalone/drakbug_report: fix
-
-	* fsedit.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-
-2001/09/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
-	in expert install.
-	Do not die when "chkconfig" fails (needed for "security_check").
-	Added "-q" option to foomatic-configure (should not get interactive).
-	Added handling of high and paranoid security levels.
-
-	* printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert
-	mode installation.
-	Added handling of high and paranoid security levels.
-
-2001/09/17  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-	* fs.pm (set_default_options): disable iocharset= and codepage= for
-	supermount
-
-2001/09/17  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-
-	* pkgs.pm (read_rpmsrate): fix bug
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug which prevented from printing the option list
-	during install.
-	Fixed bug which prevents printerdrake from running without PDQ
-	installed.
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-	more up to my need ALL flag in compssUsersChoice
-	remove auto-install special case (initialisation of compssUsersChoice)
-
-	* share/rpmsrate: 
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from
-	MDK::Common
-
-2001/09/16  siegel
-
-	* share/po/help_xml2pm.pl: added "systemitem"
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug which prevents printerdrake from running without
-	PDQ installed.
-
-2001/09/16  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm, my_gtk.pm: bugfix + cosmetic changes
-
-2001/09/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help.pm file
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: "please click on ..." for removable, nfs, smb.
-
-	* fsedit.pm: enhance lvm handling (mostly standalone)
-	  - cleanup & enhance raid mdstat reading (now works with or without
-	devfs mounted)
-	  - chunk size is buggy?
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-	more up to my need ALL flag in compssUsersChoice
-	remove auto-install special case (initialisation of compssUsersChoice)
-	use new mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* share/rpmsrate: 
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* verify_c: add special case for c::to_utf8
-
-	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-	use new mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* services.pm, install2.pm, lang.pm, commands.pm, loopback.pm,
-	tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm,
-	network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm,
-	any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new
-	mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly
-	standalone)
-
-	* devices.pm (make): ensure it never returns a non-absolute name
-	(it happened with make("foo") when cwd=/dev and /dev/foo existed)
-
-2001/09/16  siegel
-
-	* share/po/help_xml2pm.pl: added "systemitem"
-	added commet explainig that help.pm is automatically generated.
-
-	* .cvsignore: added .*.sw? for vim users
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added possibility to list command line
-	options for the printers and to give the users help for printing
-	Fixed bug of sometimes appearing the wron dialog after printing test
-	pages
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix options appearing twice in fstab
-
-	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix options appearing twice in fstab
-
-	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  civileme
-
-	* help.pm: Added a dialog in English for users selecting a printing system
-	since no other
-	OS seems to offer such a choice during install.
-
-2001/09/15  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: better connection testing
-
-	* network/tools.pm: more timeout
-
-	* network/adsl.pm: avoid asking 2 times to restart the ethernet card
-
-	* mouse.pm: readded darea realization
-
-2001/09/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: make gtk-themes installed when Gnome is choosen
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/wa.po, share/po/hu.po: updated Hungarian file
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.config, tools/Makefile: add aewm-drakx
-
-	* install_steps_gtk.pm: makes cancel on mouse selection works even better
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c,
-	tools/aewm-drakx/README: 
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* any.pm: i18n kdmrc
-	fix user icons choice
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install2.pm: don't warn if modules are missing when testing
-
-	* bootloader.pm: find error in /tmp/.error only if exception is "xxx
-	failed"
-	(write_lilo_conf): ensure linear and lba32 are not both set
-
-	* share/po/fake_c.pl: fix a tricky hack
-
-	* my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no
-	more keyboard focus)
-
-	* c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_interactive.pm: fix typo
-	find error in /tmp/.error only if exception is "xxx failed"
-	makes cancel on mouse selection works even better
-	fix cancel on mouse choice
-
-	* install_steps.pm: i18n kdmrc
-	enable supermount again
-
-	* network/adsl.pm: correct dams typo
-
-	* fs.pm (write_fstab): fix supermount moving from options to fstype
-
-	* steps.pm: find error in /tmp/.error only if exception is "xxx failed"
-
-	* tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c,
-	tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on
-	new map_request event (fix summary step)
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  siegel
-
-	* share/po/de.po: fixed another typo
-	new string
-
-	* printerdrake.pm: added missing _()
-
-	* standalone/draksec: use " instead of ' to get i18n
-
-	* standalone/draknet: fixed missing _()
-
-2001/09/15  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added the PDQ panic button.
-	Removed a superfluous "set_help" line.
-	Save default spooler at program start, fixed typos in comments.
-	Command line commands as "lpr", "lpq", ... are mapped to the correct
-	spooler now.
-	Fixed bug of a waiting message appearing together with a dialog
-	Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type
-	for a printer
-
-	* printer.pm: Added the PDQ panic button.
-	Command line commands as "lpr", "lpq", ... are mapped to the correct
-	spooler now.
-
-	* standalone/printerdrake: Fixed bug of spooler choice via command line
-	options being ignored.
-
-2001/09/15  warly
-
-	* share/rpmsrate: add drakfirsttime
-
-2001/09/14  dam's  <damien@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: make test_pms happy
-
-	* install_any.pm: pptp-adsl instead of pptp-adsl-fr
-
-	* Xconfigurator.pm: no shadow when X test
-
-	* standalone.pm: bugfix
-
-	* my_gtk.pm: no icon if wizard
-	no shadow when X test
-	shadow color
-
-	* bootlook.pm: bugfix
-	iautologin correction
-
-	* mouse.pm: trying to remove draw
-
-	* network/adsl.pm: debug
-	pptp-adsl instead of pptp-adsl-fr
-	bugfix
-	updated speedtouch handling.
-
-2001/09/14  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: removed S3 ViRGE card from card with problem with
-	frame buffer as it works fine.
-
-	* Xconfigurator.pm: fixed filtering of depth for newt version.
-	depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as
-	depth
-	32 simply doesn't work, even if DRI guide says it works :-) 24 bit works
-	fine
-	for Rage 128.
-	apply restriction on depth available when changing resolution, removed
-	S3 ViRGE
-	from experimental 3D accelerated card list as it really does not work,
-	allow on
-	second pass to change card configuration to choose server (experimental
-	server
-	are still only available to expert), added support for UseCCEFor2D for
-	Rage 128
-	card if a TV card is installed (set to true, else set to false), added
-	support
-	for Rage Mobility M... card that are Rage 128 Mobile chipset, improved
-	error
-	message display to catch only appropriate error message of XFree 4.1.0
-	only,
-	added support for 32 bits for DRI using Matrox card, improved info
-	message with
-	real version of XFree used (anybody) and identifier from PCI probe
-	(expert).
-
-2001/09/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target
-
-	* mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using
-	a reduced form of mkinitrd_helper for mkinitrd (only
-	to provide a dietlibc-enabled static insmod)
-
-2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-
-	* share/po/ko.po: updated Korean file
-
-	* share/po/da.po: updated Danish file
-	updated Danish file
-
-	* share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files
-
-2001/09/14  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm, install_any.pm: when testing for bad drives, if
-	opening for writing fails, remove the drive from the hard drive list
-	(useful for Smartmedia readers)
-
-	* pkgs.pm: update correctSize and invCorrectSize (now linear)
-
-	* share/po/fr.po: fix odin bug (please run msgfmt before committing!)
-
-	* share/rpmsrate: do not install Aurora in russian
-
-2001/09/14  siegel
-
-	* share/po/de.po: updates
-
-	* standalone/drakautoinst: Check exisence of "/root/replay_install.img"
-	before anything else ...
-
-2001/09/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added "set_help" lines for installer help texts.
-	Raw queue entry added, so cursor not always on "Alps MD-1000" when no
-	printer
-	detected.
-	Resolved conflict.
-	Now it is checked whether the network is configured and running.
-	draknet is called when the network is not configured.
-	It is checked whether the spooler is automatically started at boot.
-	The oki4daemon is started when needed.
-	Lexmarks inkjet drivers are fully integrated.
-	The permissions of the device files are set so that normal users can
-	print with PDQ.
-
-	* standalone/printerdrake: Fixed spooler selection by command line.
-
-	* printer.pm: Raw queue entry added, so cursor not always on "Alps
-	MD-1000" when no printer
-	detected.
-	Made network checking working on non-english systems.
-	Now it is checked whether the network is configured and running.
-	draknet is called when the network is not configured.
-	It is checked whether the spooler is automatically started at boot.
-	The oki4daemon is started when needed.
-	Lexmarks inkjet drivers are fully integrated.
-	The permissions of the device files are set so that normal users can
-	print with PDQ.
-
-2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
-	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13  odin
-
-	* share/po/fr.po: updated up to 6648
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: new migration feature for creation of
-	partitions on existing mount points
-
-	* diskdrake.pm: 
-	  - add back shortcuts
-	  - red colored buttons in nfs/smb/removable
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated
-
-	* my_gtk.pm: updated
-	addde /usr/share/icons in path for pixmaps search
-	shadow reduced to 5 pixels
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
-	trouble to XFree86 4.1.0.
-
-	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
-	fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13  odin
-
-	* share/po/fr.po: updated up to 6648
-	updated fr.po
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add krozat
-
-	* any.pm (inspect): use a safer dir when standalone
-
-	* install_steps.pm: extend disable KDE GreetString to
-	ja|ko|zh|ru|th|vi|be|bg
-	do not translate kdm GreetString in ja|ko|zh (what about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-	* diskdrake_interactive.pm: new migration feature for creation of
-	partitions on existing mount points
-
-	* diskdrake.pm: 
-	  - add back shortcuts
-	  - red colored buttons in nfs/smb/removable
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install_steps_interactive.pm (selectKeyboard): don't prompt in newbie
-	mode if >=90, not >90
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: shadow reduced to 5 pixels
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
-	fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-
-	* services.pm: updated repartition of services into category, network
-	category are commented so
-	that service will to "Other" one.
-
-	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
-	trouble to XFree86 4.1.0.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: filtered the list from lang2keyboard to display only valid
-	keyboards
-
-	* c/stuff.xs.pm: add partition adding on the fly trick
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
-	about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  François Pons  <fpons@mandrakesoft.com>
-
-	* lang.pm: fixed bad $localedir in load_mo().
-
-	* g_auto_install: updated so that this scripts is running again.
-
-	* install2.pm: do not output error message for bad kernel if using
-	--g_auto_install.
-
-	* install_steps_interactive.pm: fixed Printer name reporting for a
-	specific printer.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* services.pm: updated repartition of services into category, network
-	category are commented so
-	that service will to "Other" one.
-
-	* live_install2: updated #! as ../perl is not used.
-
-	* my_gtk.pm: synced with --g_auto_install mode.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-	* Xconfigurator.pm: fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-	synced with --g_auto_install mode.
-	disable testing with all SiS card except SiS 630 under XF4.
-
-2001/09/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po,
-	share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po,
-	share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
-	share/po/id.po: updated pot file
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: filtered the list from lang2keyboard to display only valid
-	keyboards
-
-	* c/stuff.xs.pm: add partition adding on the fly trick
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install2.pm (selectKeyboard): remove code causing
-	install_steps::selectKeyboard to be skipped
-
-	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
-	about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/12  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: typo
-	new color for shadow
-	corrected shadow handling
-	no shadow if liveupdate
-
-	* share/help.png: new help
-
-	* mouse.pm: removed debug code
-
-	* network/tools.pm, network/netconnect.pm, network/ethernet.pm,
-	network/isdn.pm, network/adsl.pm, network/modem.pm: new default
-	connection handling
-
-	* standalone.pm: added wait message while installing package
-
-2001/09/12  daouda
-
-	* standalone/drakbug_report: add Mandrake release section
-
-2001/09/12  fcrozat
-
-	* share/rpmsrate: Fix gnome install
-
-2001/09/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: removed obsolete --nocpi flag for install2.
-	avoid probing usb device (for mouse) if --noauto is given.
-
-	* install_steps.pm: disabled frame buffer for most of the SiS display card
-	except SiS 630.
-
-	* Xconfigurator.pm: added MGA G550 as always having two head.
-
-	* live_install2: fix when switching perl version.
-
-	* live_install: use system perl instead.
-
-2001/09/12  gbeauchesne
-
-	* share/list.ia64, share/list, share/list.i386: 
-	  - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to...
-	  - list.i386: ... Here.
-	  - list.ia64: Updates.
-
-2001/09/12  odin
-
-	* share/po/fr.po: updated fr.po
-
-2001/09/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po,
-	share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po,
-	share/po/it.po, share/po/af.po: updated pot file
-
-	* help.pm: new version with [ and ]
-
-	* lang.pm: commented out utf-8 russian locale, for now
-
-2001/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: fix typo
-	added wonderful lsnetdrake
-
-	* modules.pm, install2.pm: display error when the kernel mismatch the
-	modules
-
-	* docs/README: explain how to get the boot kernels
-
-	* install_steps_gtk.pm (choosePackagesTree): translate the categories
-
-	* standalone/drakbug_report: cleanup
-
-	* bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels
-	(suggest): no "quiet" boot for smp and enterprise kernels
-	allow grub even for more than 800MB
-
-	* Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake
-
-2001/09/12  siegel
-
-	* share/po/de.po: new & shiny verion
-
-	* share/po/help_xml2pm.pl: fixed silly error
-	added keycap patch
-
-2001/09/12  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected shadow handling
-	no shadow if liveupdate
-	table undef corrected
-	removed shadows if standalone
-
-	* standalone/drakgw, standalone/draknet: corrected wizard mode in newt
-	mode
-
-	* mouse.pm: removed debug code
-
-	* network/netconnect.pm: corrected splash in non X mode
-
-2001/09/12  daouda
-
-	* standalone/drakbug_report: add Mandrake release section
-
-2001/09/12  François Pons  <fpons@mandrakesoft.com>
-
-	* live_install2: fix when switching perl version.
-
-	* live_install: use system perl instead.
-
-2001/09/12  kjx
-
-	* share/po/zh_CN.po: revison
-
-2001/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README: explain how to get the boot kernels
-
-	* install_steps_gtk.pm (choosePackagesTree): translate the categories
-
-	* standalone/drakbug_report: cleanup
-
-	* bootloader.pm: allow grub even for more than 800MB
-
-2001/09/11  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: removed useless print
-	don't detect ethx if no autodetection.
-	implement smarter checkboxes
-
-	* mouse.pm: test updated
-	mouse test worked
-
-	* network/ethernet.pm: don't detect ethx if no autodetection.
-	implement smarter checkboxes
-
-	* pixmaps/arrow_down.xpm: pixmap corrected
-	new arrows
-
-	* pixmaps/arrow_up.xpm: new arrows
-
-	* share/rpmsrate: added ibod
-	added isdn-light
-
-	* interactive_gtk.pm, my_gtk.pm: fear the shaped windows...
-
-2001/09/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: small fix
-
-	* share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po,
-	share/po/it.po: updated Hungarian file;
-	updated pot file
-
-2001/09/11  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile (tar-drakxtools): remove the building of "help" for drakxtools
-
-	* bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not
-	a primary
-	partition (otherwise lilo dies)
-
-2001/09/10  dam's  <damien@mandrakesoft.com>
-
-	* network/modem.pm, network/ethernet.pm: detect_devices
-
-	* standalone/net_monitor, network/network.pm: removed timeout:1 in
-	resolv.conf, modified timeout scanning in draknet/net_monitor
-
-	* install_gtk.pm, install_steps_gtk.pm: mouse test moved
-
-	* mouse.pm: test_mouse moved
-
-	* my_gtk.pm: added border
-	window decorations
-	no set_events if embedded
-
-	* standalone/draknet: removed timeout:1 in resolv.conf, modified timeout
-	scanning in draknet/net_monitor
-	debug
-
-	* standalone/mousedrake: don't fork the code
-
-	* network/adsl.pm: debug
-	debug
-
-2001/09/10  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated g_auto_install() for newer printerdrake
-	interface.
-
-	* modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into
-	detect_devices::pcmcia_probe.
-
-	* mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for
-	blank.img floppy image.
-
-	* install_steps_interactive.pm, mouse.pm: added hid type usb mouse
-	support.
-
-	* Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz,
-	1024x480 but not automatically used).
-
-2001/09/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: plop
-	some adjustements in Games section
-
-2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/de.po: updated German file; added choice of
-	various quotes in help_xml2pm.pl
-	Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/zh_TW.po: updated Chinese file
-
-	* share/po/ko.po: updated Korean file
-	Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/help_xml2pm.pl: updated German file; added choice of various
-	quotes in help_xml2pm.pl
-
-2001/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: 
-	  - make diskdrake work in embedded mode
-	  - $my_gtk::pop_it used where it should
-
-	* detect_devices.pm: fix ide-scsi appearing 2 times when standalone
-	because both in /proc/ide
-	and /proc/scsi/scsi
-
-	* share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars
-	  - skip directories missing drakx-help.xml
-	  - convert to the right charset (taken from $lang.po)
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-	* diskdrake.pm: 
-	  - make diskdrake work in embedded mode
-	  - $my_gtk::pop_it used where it should
-	fix Umount and Mount when i18ned for nfs/smb
-	don't display Wizard if wizard done before DrakX
-
-	* share/po/Makefile, share/po/.cvsignore: 
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-2001/09/10  siegel
-
-	* share/po/de.po: updates
-
-2001/09/10  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue
-	modified to not get
-	interactive when overwriting a file.
-	Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be
-	able to
-	  identify which PPD from /usr/share/cups/model was used (for
-	auto-install).
-
-2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated pot file;
-	removed translations that are too low on percentage.
-
-2001/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl: 
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: probeall handling
-
-2001/09/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue
-
-2001/09/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/sv.po: updated Swedish file
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (ejectCdrom): fix D state on exit
-
-	* diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm: 
-	  - "Wizard" and "More" are back
-	  - allow "Use for loopback" when there is already a loopback
-	  - set the options on newly created partitions
-	  - recompute_loopbacks called after modification of loopbacks, no more
-	before reading
-	  - restrict the lenght of the lines in partition description
-	  - make loopback work
-
-	* interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm:
-	clicked_may_quit used in place of clicked+exception to work-around
-	perl-GTK bug (?)
-
-	* share/po/i18n_compssUsers: ensure we're not adding a string already
-	there (otherwise msgmerge yells)
-
-	* share/po/help_xml2pm.pl, share/po/.cvsignore: xml help
-	handling/enhancing for multi-langs
-
-	* modules.pm: probeall handling
-	(write_conf): switch to "probeall scsi_hostadapter ..."
-
-	* share/po/Makefile: xml help handling/enhancing for multi-langs
-	xml help handling/enhancing for multi-langs
-
-	* partition_table.pm (get_normal_parts_and_holes): remove only small
-	holes, not small partitions
-
-	* fs.pm (set_default_options): remove iocharset=... for nfs (why was it
-	there?)
-
-2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix some ortograf
-
-	* share/rpmsrate: lvm not installed for everyone ?!
-
-2001/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: force exitInstall to be non automatic
-
-	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
-	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
-	installs work again
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): switch to "probeall scsi_hostadapter ..."
-
-2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix some ortograf
-
-	* share/rpmsrate: lvm not installed for everyone ?!
-
-	* modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't
-	flush it when
-	it didn't decide to put any modules in it (to leave user's modules) (2)
-	it
-	doesn't remove the last line (3) it uses stronger regexp'es for
-	substitution to not remove modules that have names made of other modules
-	names subsets
-
-2001/09/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2001/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm: fix font in iso-15
-
-	* modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..."
-
-	* interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak
-	with nested subs)
-
-	* share/diskdrake.rc: change name
-
-	* install_steps_auto_install.pm: force exitInstall to be non automatic
-
-	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
-	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
-	installs work again
-
-	* timezone.pm: Asia/Taipei for Traditional Chinese
-
-	* detect_devices.pm: remove debug code
-
-2001/09/07  daouda
-
-	* share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07  fcrozat
-
-	* share/rpmsrate: Add grio500
-
-2001/09/07  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
-	result).
-	fix all Matrox card used with XF4 which really does not like X in frame
-	buffer
-	(unable to restore frame buffer of DrakX).
-
-2001/09/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386,
-	rescue/tree/etc/rc.sysinit: ext3, xfs, jfs
-
-	* bootloader.pm: use -v for mkinitrd
-
-	* share/po/fr.po: "reseaux" and plurals
-	misc
-
-	* share/rpmsrate: some work on games
-
-2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files
-
-2001/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: cleanup po
-
-	* install_steps.pm: s|kdmrc|kdm/kdmrc|
-
-	* lang.pm: fix load_mo call
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
-	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
-	disable_forced_fsck called for ext3 formatting
-	(Type): disable fsck when migrated ext2->ext3
-
-	* fs.pm: disable_forced_fsck called for ext3 formatting
-
-2001/09/07  siegel
-
-	* share/po/de.po: updates
-
-2001/09/07  Till Kamppeter <till@mandrakesoft.com>
-
-	* standalone/printerdrake, printer.pm, printerdrake.pm: Data structure
-	fitted for auto-install to work
-	Optimized program to be much faster
-	Many more waiting messages
-	Many bugfixes
-
-2001/09/07  daouda
-
-	* share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07  fcrozat
-
-	* share/rpmsrate: Add grio500
-
-2001/09/07  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
-	result).
-	fix all Matrox card used with XF4 which really does not like X in frame
-	buffer
-	(unable to restore frame buffer of DrakX).
-
-2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* any.pm: Changed simple quote to double quote for a translatable string
-	(otherwise
-	it isn't seen)
-
-	* share/po/es.po: updated Spanish file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po,
-	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	updated pot file
-
-	* share/po/sv.po: updated Swedish file
-	updated pot file
-
-2001/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: s|kdmrc|kdm/kdmrc|
-	remove the "konsole and gnome-terminal are lamers in exotic languages,
-	link them to something better"
-
-	* bootloader.pm (write_lilo_conf): fix typo
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
-	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
-	disable_forced_fsck called for ext3 formatting
-	(Type): disable fsck when migrated ext2->ext3
-
-	* install_any.pm, keyboard.pm: cleanup
-
-	* partition_table.pm, share/list: add xfs
-
-	* fs.pm: disable_forced_fsck called for ext3 formatting
-
-	* share/rpmsrate: add jfsprogs
-
-2001/09/07  siegel
-
-	* share/po/de.po: updates
-	updates/fixes
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-
-2001/09/06  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
-	XFree 4.1.0 is not bad, and
-	all NVIDIA card are no more considered bad.
-
-	* pkgs.pm: fixed retry of package 3 times everytime even if first install
-	succeeded, now
-	after first successfull install, go to next package to install.
-
-	* install_steps.pm: removed some cards for allowing frame buffer.
-
-2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: works now ;p
-
-2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX
-	corrected lang.pm to have coherence in locale usage (it was the source
-	of much of the problems); changed keyboard.pm to ignore charset encoding
-	in locale name for locale -> keyboard guessing.
-	removed unused gconv modules, converted az.po to utf-8 (as it was the
-	only
-	remaining az.po on Earth still in a non standard encoding)
-
-	* share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2,
-	keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in
-	locale usage (it was the source
-	of much of the problems); changed keyboard.pm to ignore charset encoding
-	in locale name for locale -> keyboard guessing.
-	removed unused gconv modules, converted az.po to utf-8 (as it was the
-	only
-	remaining az.po on Earth still in a non standard encoding)
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: fix keyboard config + some cleanup
-	cleanup (use /proc/self instead of /proc/$$)
-
-	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
-	keyboard config + some cleanup
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-
-2001/09/06  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
-	XFree 4.1.0 is not bad, and
-	all NVIDIA card are no more considered bad.
-	avoid using @resolutions_laptop, now use only @resolutions, this means
-	1400x1050
-	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
-	(so
-	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
-	file).
-
-	* install_steps.pm: removed some cards for allowing frame buffer.
-	fix log when configuring printer queue.
-
-	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
-	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
-	and
-	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
-	* pkgs.pm: fixed retry of package 3 times everytime even if first install
-	succeeded, now
-	after first successfull install, go to next package to install.
-
-	* install_any.pm: update printer data for g_auto_install.
-
-2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: works now ;p
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: fix keyboard config + some cleanup
-	cleanup (use /proc/self instead of /proc/$$)
-
-	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
-	keyboard config + some cleanup
-
-	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
-	type
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-	new mouse test
-
-2001/09/06  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: revert previous patch, this is not usable with current rpm as
-	it complains if
-	one the file has a modified MD5SUM against the header describing it in
-	the
-	hdlist, so this is most of the time useless.
-	guess filename if the file is not found (for an rpm file during
-	installation),
-	so try with release incremented in such case (good for Cooker user or
-	local
-	tester using network installation).
-
-	* install_steps.pm: fix log when configuring printer queue.
-
-	* Xconfigurator.pm: avoid using @resolutions_laptop, now use only
-	@resolutions, this means 1400x1050
-	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
-	(so
-	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
-	file).
-
-	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
-	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
-	and
-	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
-	* install_any.pm: update printer data for g_auto_install.
-
-	* printerdrake.pm: revert previous commit.
-	added a missing ifup lo, on some case (auto_install) it fails.
-
-	* printer.pm: start ifup lo before starting service cups.
-
-2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/ga.po, share/po/no.po: updated Irish and Norwegian files
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend,
-	fix the use
-
-	* diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names
-
-	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
-	type
-
-	* timezone.pm (ntp_server): fix (step-tickers was empty)
-
-2001/09/05  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor, standalone/draknet: corrected opeions
-
-	* standalone/mousedrake: typo
-	updated
-
-	* network/tools.pm: corrected initcript
-
-	* pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm,
-	pixmaps/mouse_left.xpm: new pixmaps
-
-2001/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/diskdrake: fix function called
-
-2001/09/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Set default printer (all spoolers), manual
-	config (CUPS), bugfixes, clean-ups.
-
-2001/09/05  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
-	pixmaps/wiz_drakgw.png: new icons
-
-	* share/themes-mdk.rc: updated theme
-
-	* standalone/draknet: interface display corrected
-
-	* share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons
-
-	* install_gtk.pm: 2 sec without sensitives buttons
-
-	* network/netconnect.pm: only if standalone
-
-	* pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png,
-	pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png,
-	pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png,
-	pixmaps/bootdisk.png: new pixmaps
-
-2001/09/05  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed display of XFdrake test image (fcrozat).
-
-	* install_steps.pm: fixed typo preventing removable devices to be seen in
-	/etc/fstab.
-	fixed configurePrinter (used for auto_install).
-
-	* install_steps_interactive.pm: avoid asking when using existing partition
-	for magic partition with a real
-	mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so
-	partition is
-	not unmountable).
-
-	* bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown
-	lilo.
-
-	* fs.pm: fix bad creation of /mnt/hd for an hd installation without
-	ramdisk.
-	support setting /tmp/hdimage in /etc/fstab even if memory is low (not
-	using ramdisk).
-
-	* install_any.pm: filtering $o->{printer} for g_auto_install().
-	allow installing urpmi on hd install even if low memory (so not using
-	ramdisk).
-
-	* diskdrake_interactive.pm: Do not use for loopback of magic partition
-	(/tmp/hdimage).
-
-2001/09/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1
-
-2001/09/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated Bosnian file
-
-	* share/po/uk.po: updated Ukrainian file
-
-2001/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: use EISA_ID in more cases to have the name
-	non-case dependent EISA comparison
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* Xconfig.pm: fix typos
-	non-case dependent EISA comparison
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* modules.pm: favor tmscsim over AM53C974
-
-	* tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* standalone/diskdrake: fix function called
-
-2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	Updated Danish file; updated pot file
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix typo
-
-2001/09/04  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Fitted to the new Foomatic version.
-	Fixed bug of spooler change only working when language is English.
-
-2001/09/04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix bad vga= which go for some install.
-
-2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* network/netconnect.pm: small english change
-
-	* mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff
-
-	* share/rpmsrate: tetex-doc
-
-	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	Updated Danish file; updated pot file
-
-	* share/po/ja.po: updated Japanese file
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): use "above" instead of "post-install"
-
-	* partition_table.pm: re-add JFS
-
-	* fsedit.pm, common.pm, bootloader.pm: 
-	  - don't expand symlinks in grub's menu.lst
-	  - better use of /proc/partitions verification
-
-	* detect_devices.pm (getCompaqSmartArray): add yet another location for
-	cpqarray location
-
-	* fs.pm: fix typo
-	mount ext3 as ext2 during install for speed up
-
-2001/09/04  fcrozat
-
-	* share/rpmsrate: Add plugins for KDE and Mozilla
-
-2001/09/04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix bad vga= which go for some install.
-
-	* pkgs.pm: cleanup to avoid invalid file error.
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): use "above" instead of "post-install"
-
-	* fs.pm: mount ext3 as ext2 during install for speed up
-
-	* partition_table.pm: re-add JFS
-
-	* fsedit.pm, common.pm, bootloader.pm: 
-	  - don't expand symlinks in grub's menu.lst
-	  - better use of /proc/partitions verification
-
-	* detect_devices.pm (getCompaqSmartArray): add yet another location for
-	cpqarray location
-
-2001/09/04  yduret
-
-	* my_gtk.pm: emebedded mode fix
-
-	* interactive_gtk.pm, diskdrake.pm: embedded mode fix
-
-2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzy-ise a few things, translate a few things
-
-2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated Korean file
-
-2001/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix for lvm (non-)creation of devices
-
-2001/09/03  yduret
-
-	* my_gtk.pm, diskdrake.pm: fix Embedded mode
-
-2001/09/03  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: added timeout in resolv.conf
-
-2001/09/03  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated to use new urpmi.cfg format for install_urpmi,
-	make sure the directory
-	is not given for ftp and http install ($dir).
-
-	* Xconfigurator_consts.pm: added 1920x1440 and 2048x1536.
-
-	* Xconfig.pm: make sure a staling Mouse2 is not present unless it really
-	physically exists.
-
-2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add axnet_cs to pcmcia category
-
-	* mdk-stage1/probing.c: change `scd' with `sr'
-
-2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/ko.po: updated Korean file
-
-2001/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm (ntp_server): also set /etc/ntp/step-tickers
-
-	* fsedit.pm, devices.pm: fix mtab reading and pseudo-device use
-
-	* interactive_gtk.pm: better sizing for combo boxes
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	to propose already formatted
-	fat partitions
-
-	* share/list: those files disappeared ??
-
-	* fs.pm: fix for lvm (non-)creation of devices
-	(set_default_options): created
-	fix mtab reading and pseudo-device use
-
-	* diskdrake.pm (smb_create, nfs_create): make the "New" button work
-	(raw_hd_mount_point): fix checking the same mount point
-	(try_): fix error displaying
-
-	* partition_table.pm: fix switching to 0x85 extended when
-	remove_empty_extended is called
-
-2001/09/03  yduret
-
-	* standalone/net_monitor: sync with new logdrake command line options
-
-2001/09/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated bosnian file
-	Added Bosnian file
-
-2001/09/01  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid deleting package from %packages in install() when closing
-	fd associated,
-	if the open is called again (?), it will cause an invalid file (seems to
-	happens
-	on some invalid file).
-
-2001/08/31  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: corrected yesno interpretation
-	libsafe modification
-
-	* network/netconnect.pm: corrected profil recording for modem
-
-	* standalone/net_monitor: correted typo
-
-	* network/ethernet.pm: corrected zero return when cable configuring
-
-	* any.pm: corrected autologin : no uc anymore
-
-	* network/modem.pm: added domainname2 setting
-
-	* share/logo-mandrake.png: new logo
-
-2001/08/31  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added missing AlwaysCore line for second mouse for
-	XF3.
-
-	* mouse.pm: added missing AlwaysCore line for second mouse in XF3.
-
-	* standalone.pm: add option --allow-medium-change to force asking question
-	even if --auto is
-	given on command line of urpmi, for installing package so that a dialog
-	appears.
-
-2001/08/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES
-	section
-	have "numlock" in INSTALL because it's the only package which goes to
-	CD#2
-	when you unselect all groups, so having it here will allow not changing
-	CD
-	with this kind of small install
-
-2001/08/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian
-	and Spanish files
-
-	* share/po/sv.po: updated Swedish file
-	updated Ukrainian and Spanish files
-
-2001/08/31  siegel
-
-	* share/help_sav.png: not used any more
-
-	* share/po/de.po: updates
-
-	* share/logo-mandrake2.png, share/logo-mandrake_trans.png,
-	share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old
-	versions => not in use any more
-
-2001/08/31  yduret
-
-	* bootlook.pm: updated code
-
-2001/08/30  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: nicer display
-
-	* standalone/draknet: added use common.pm (can be usefull, eh?)
-
-	* network/network.pm: silently /sbin/ip
-	track_network_id only if laptop
-
-2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: Updated Danishfile
-	updated pot file (I had lost the group descriptions, sorry, they are
-	back now)
-	moved chinese files to charset independent names
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I
-	had lost the group descriptions, sorry, they are back now)
-	moved chinese files to charset independent names
-
-2001/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (read): it works now
-
-	* help.pm: fixed (was utf8)
-
-	* install_steps_gtk.pm (new): call interactive_gtk::new
-
-	* install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial
-	mouse) before service choice
-
-	* pkgs.pm (naughtyServers): update for 8.1
-
-2001/08/30  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: corrected icon display
-
-	* my_gtk.pm: new wizard
-
-	* interactive_gtk.pm: corrected wizard mode display height/width
-
-	* standalone/draknet: added draknet client installation
-
-	* network/network.pm: track_network_id only if laptop
-	dhcp package installation
-
-	* pixmaps/wiz_default_left.png: new logo
-
-2001/08/30  François Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: make sure to update all symlink according to any mouse (max 2)
-	probed.
-	fix previous fixes on mouse::write_conf
-
-	* standalone/mousedrake: fix previous fix (typo).
-	keep mouse specific paramater if user does not change its mouse.
-	make sure --auto is not interactive on some part.
-	use default value for port device if a serial mouse.
-
-	* printer.pm: fixed foomatic failed (no lo up since ifup lo don't run)
-
-	* Makefile: ugly to make sure standalone/pixmaps is not here when building
-	tar-drakxtools.
-
-	* Xconfig.pm: when reading existing configuration for mouse, update
-	type|name for second mouse too.
-	make sure default to set 3 for nbuttons for getinfoFromXF86Config for
-	second
-	mouse if this mouse has 3 buttons.
-
-	* Xconfigurator.pm: for single heads mode, no screen id should be set in
-	file (or XFree is going
-	mad, but he is right, no ?)
-
-	* install_any.pm: if a medium is refused, get rid of it definitively until
-	it is accepted again.
-
-2001/08/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: have a wait_message during installation of
-	bootloader
-
-	* mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA
-	Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28
-
-2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese,
-	Spanish and Vietnamese files
-
-2001/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: allow LVM on RAID
-
-	* help.pm: fixed (was utf8)
-
-	* any.pm: cleanup
-
-	* pkgs.pm (naughtyServers): update for 8.1
-
-	* lang.pm (read): it works now
-
-	* fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if
-	removable
-	media
-
-	* share/po/Makefile: fix utf8 translation of xml file
-
-	* interactive_gtk.pm: fix&cleanup window size
-
-	* tools/Makefile: cleanup unneeded stuff
-
-2001/08/30  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/30  warly
-
-	* share/rpmsrate: add koffice-i18n diald vlan-utils
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix language selection
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
-	in /)
-
-2001/08/29  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed if undef encountered in depslist when installing package
-	(traversing
-	depslist as $depOrder).
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix language selection
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* install_steps_gtk.pm (installPackages): have Ok button by default for
-	asking for changing CD
-
-	* bootloader.pm (mkbootdisk): cleanup
-
-	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
-	in /)
-
-	* devices.pm: remove fd0H1440 and fd1H1440
-
-	* modules.pm: remove "msdos"
-
-2001/08/29  François Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
-	already defined.
-
-	* standalone/mousedrake: try to merge already existing mouse configuration
-	with what has been probed,
-	change if mouse is really changed as probe is incomplete.
-
-	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-	* pkgs.pm: fixed if undef encountered in depslist when installing package
-	(traversing
-	depslist as $depOrder).
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* keyboard.pm (loadkeys_files): fixed
-
-	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
-	Makefile.config: add localedrake (not tested)
-
-	* rescue/make_rescue_img: make it work (do not have the dev in /)
-	cleanup, speedup, use mknod for devices
-
-	* install_steps_gtk.pm (installPackages): have Ok button by default for
-	asking for changing CD
-
-	* rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices
-
-	* bootloader.pm (mkbootdisk): cleanup
-
-	* rescue/dirs: make it work (do not have the dev in /)
-
-	* devices.pm: remove fd0H1440 and fd1H1440
-
-	* modules.pm: remove "msdos"
-
-2001/08/29  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch
-	configuration
-
-2001/08/29  François Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
-	already defined.
-
-	* install_steps.pm: add support for mandatory frame buffer support (SiS
-	630) need them for XF3 to
-	work properly, XF4 does work with it nicely.
-
-	* Xconfigurator.pm: make sure Port entry for wacom is placed first.
-
-	* standalone/mousedrake: try to merge already existing mouse configuration
-	with what has been probed,
-	change if mouse is really changed as probe is incomplete.
-
-	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: games
-
-2001/08/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle
-	symlinks device and devfs devices
-
-	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
-	Makefile.config: add localedrake (not tested)
-
-	* install_steps.pm: no need to have devfs=nomount anymore in root raid
-	do not modify fstab options in upgrade
-
-	* keyboard.pm (loadkeys_files): fixed
-	fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup
-
-	* diskdrake_interactive.pm: try to better handle symlinks device and devfs
-	devices
-	(main): fix
-	(Create): fix typo causing primaryOrExtended to be ignored
-
-	* rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup,
-	speedup, use mknod for devices
-
-	* c/stuff.xs.pm, detect_devices.pm: better floppy detection/info
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm, install2.pm: corrected icon handling
-
-	* services.pm: added cupslpd in printing section
-
-2001/08/28  François Pons  <fpons@mandrakesoft.com>
-
-	* Makefile.config: really fix typo...
-	fixed typo.
-
-2001/08/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove the temporary file /tmp/autoinst.img
-
-	* install_steps.pm, install_steps_interactive.pm: propose to format / and
-	/usr even if isFormatted. More generally do not trust isFormatted to
-	show which partitions to format
-
-2001/08/28  siegel
-
-	* ChangeLog, keyboard.pm: 
-	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
-	if no laptop is detected (= give users the chance to know about the
-	existence of this variable).
-
-2001/08/28  yduret
-
-	* standalone/diskdrake: embedded mode nicer
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm, install2.pm: corrected icon handling
-
-2001/08/28  François Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added /sbin/e2fsck
-
-	* share/aliases: added fsck.ext2 -> e2fsck (now in list file)
-	removed e2fsck.shared as e2fsprogs now provide a shared version instead
-	of a
-	static one.
-
-	* Makefile.config: really fix typo...
-	fixed typo.
-	removed reference to e2fsck.shared (now use e2fsck from package which is
-	shared
-	since 1.23-2mdk).
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove the temporary file /tmp/autoinst.img
-
-2001/08/28  siegel
-
-	* ChangeLog, keyboard.pm: 
-	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
-	if no laptop is detected (= give users the chance to know about the
-	existence of this variable).
-
-2001/08/28  yduret
-
-	* standalone/diskdrake: embedded mode nicer
-
-2001/08/28  Stefan Siegel  <siegel@mandrakesoft.com>
-
-	* keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard 
-	if no laptop is detected (= give users the chance to know about
-	the existence of this variable).
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: typo
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: default the licence agreement to "Refuse"
-
-	* standalone/drakboot: security fix and various
-	move to all_hds stuff
-
-	* c/stuff.xs.pm, bootloader.pm: security fix and various
-
-2001/08/28  warly
-
-	* share/rpmsrate: move libsafe to SERVER_OTHER 2
-	added prelude, libsafe...
-
-2001/08/28  yduret
-
-	* standalone/drakxconf: readded dsikdrake
-	added new items, remove some old ones
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: corrected hwaddr setting and draknet first window
-	display
-	corrected typo
-
-	* network/netconnect.pm: corrected hwaddr setting and draknet first window
-	display
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: corrected hwaddr setting and draknet first window
-	display
-	corrected typo
-
-	* network/netconnect.pm: corrected hwaddr setting and draknet first window
-	display
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: nicer help display
-
-	* share/keyboards.tar.bz2: fix the rights
-
-	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected bad window size
-
-	* network/network.pm: make it compile
-	corrected hwaddr stuff
-	added HWADDR
-
-	* network/tools.pm: corrected internet initscript
-
-	* any.pm, mouse.pm: make it compile
-	add_devfslink
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
-	Added Latvian keyboard
-
-	* share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX
-
-	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: nicer help display
-
-	* diskdrake.pm: use empty hash instead of the raid/loopback array
-
-	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected bad window size
-
-	* network/network.pm: added HWADDR
-
-	* network/tools.pm: corrected internet initscript
-
-2001/08/27  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej
-	patch to support CHAP again.
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
-	Added Latvian keyboard
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: use empty hash instead of the raid/loopback array
-
-2001/08/26  warly
-
-	* share/rpmsrate: add some important packages
-
-2001/08/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: require -> use
-
-	* install_any.pm: save the .img file so that multi-cd install won't ask to
-	re-enter first cd
-
-2001/08/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/26  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/.cvsignore: fetch directly the latest
-	drakx-help.xml
-
-2001/08/25  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakbug_report: add "rpm -qa"
-
-	* bootlook.pm: fix deprecated call standalone::pkgs_install
-
-	* diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/25  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm, steps.pm: icon correction
-
-2001/08/25  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): accept mounting iso9660 filesystem as it should be
-	(write_fstab): enable mounting more than one swap :)
-
-	* bootlook.pm: fix deprecated call standalone::pkgs_install
-
-	* install_steps.pm: added the missing security parameter to
-	set_default_options
-
-	* diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm,
-	pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal
-	pix
-
-	* standalone/mousedrake: updated mouse test
-
-2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
-	uncompressing of ramdisk will rulz now
-
-	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
-	parameter provided in network steps
-
-	* mdk-stage1/probing.c: 
-	  - descr of proc files
-	  - fix small typo (segfault or not segfault? that's the question)
-	enable install from Compaq Smart Array
-
-	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
-	than gcc statically
-
-	* mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart
-	Array
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/pcmcia_config.patch: update the patch
-
-	* Makefile (test_pms): make perl_checker skip help.pm
-	ensure no .orig are generated when the pcmcia patch is applied
-
-	* tools/make_mdkinst_stage2: give a little more free space (esp. for
-	russian lang)
-
-	* lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates
-	help.pm from xml doc done by doc team
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: bugfix, speedtouch help
-
-	* standalone/mousedrake: updated mouse test
-
-2001/08/24  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed possible bug (not sorted partition when calling
-	mount_part).
-
-	* install_any.pm: fixed hdInstallPath for an hd installation without
-	usingRamdisk (not installing
-	urpmi in such case).
-	updated packages to copy for printerdrake, removed almost obsoletes
-	XFree86
-	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
-	3DLabs)
-	which means user will have to change CD back to CD#1 if he a such a
-	card.
-	removed obsolete code for cond_remount and cond_umount and update
-	hdInstallPath
-	for hd installation.
-
-	* diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of
-	common::useRamdisk().
-	take care mount point action is available for the hd installation
-	partition only
-	if a ramdisk is used (as it can be unmounted).
-	use more global isMagicPart instead of isInstallHdPart.
-	added real_mntpoint documentation and take care of hd install partition
-	for
-	available actions.
-
-	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
-	partition.
-	fixed partition never seen as mounted, added special case for
-	real_mntpoint to
-	remount magic partition on the right place.
-
-2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
-	uncompressing of ramdisk will rulz now
-
-	* mdk-stage1/automatic.c: revert my auto->interactive patch
-
-	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
-	parameter provided in network steps
-
-	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
-	than gcc statically
-
-	* mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable
-	install from Compaq Smart Array
-
-2001/08/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm:
-	enabling euro and utf-8 for some languages; added unicode font
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-
-	* tools/pcmcia_config.patch: update the patch
-
-	* lang.pm: no need for UTF-8/LC_CTYPE
-	(load_mo): if not usingRamdisk, don't try getFile
-
-	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-	(Done): do not write fstab nor ask about it in install
-
-	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-	* Makefile: ensure no .orig are generated when the pcmcia patch is applied
-
-	* partition_table.pm (write): do not die when real_mntpoint fs fail to
-	unmount/remount, just log
-	(write): unmount+remount real_mntpoint before doing the kernel_read
-
-	* share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
-	* pkgs.pm: fix "invalid file"
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: speedtouch configuration
-
-	* my_gtk.pm: gtk_create_xpm handles no absolute xpm path
-
-	* pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm:
-	added new mouse pixmap for mousedrake
-
-	* network/adsl.pm: bugfix, speedtouch help
-	added aliases for speedtouch stuff
-	speedtouch configuration
-	removed adsl detectioin, once again.
-
-	* standalone/mousedrake: no absolute pixmap reference
-	new mousedrake. experimental
-
-	* network/tools.pm: speedtouch configuration
-	export write_initscript, correct initscript.
-
-2001/08/24  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed possible bug (not sorted partition when calling
-	mount_part).
-
-	* diskdrake_interactive.pm: take care mount point action is available for
-	the hd installation partition only
-	if a ramdisk is used (as it can be unmounted).
-	use more global isMagicPart instead of isInstallHdPart.
-	added real_mntpoint documentation and take care of hd install partition
-	for
-	available actions.
-
-	* install_any.pm: fixed hdInstallPath for an hd installation without
-	usingRamdisk (not installing
-	urpmi in such case).
-	updated packages to copy for printerdrake, removed almost obsoletes
-	XFree86
-	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
-	3DLabs)
-	which means user will have to change CD back to CD#1 if he a such a
-	card.
-	removed obsolete code for cond_remount and cond_umount and update
-	hdInstallPath
-	for hd installation.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
-	mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures
-	and updated documentation.
-
-	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
-	partition.
-	fixed partition never seen as mounted, added special case for
-	real_mntpoint to
-	remount magic partition on the right place.
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (write): do not die when real_mntpoint fs fail to
-	unmount/remount, just log
-	(write): unmount+remount real_mntpoint before doing the kernel_read
-
-	* install_steps.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-
-	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-	(Done): do not write fstab nor ask about it in install
-
-	* lang.pm (load_mo): if not usingRamdisk, don't try getFile
-
-	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-2001/08/24  siegel
-
-	* share/po/de.po: New & shiny german version
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/el.po: updated Greek file
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/23  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: at_boot connection,resolvconf in profiles
-
-	* standalone/draksec: addedlibsafe option
-
-	* network/adsl.pm: restart network after having tested adsl. experimental
-
-2001/08/23  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: removed unusefull greping when building package
-	tree.
-
-2001/08/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: work on GAMES section
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/lv.po: updated Latvian file
-
-2001/08/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not
-	using ramdisk
-	(disable_user_view): damned kdmrc moved
-
-	* diskdrake_interactive.pm: cancel at startup will now exit
-	ask wether to save fstab
-	(part_possible_actions): have "Mount point" first to please fpons
-
-	* fs.pm: keep the freq&passno of /etc/fstab
-
-	* tools/i386/netboot/menu.lst.example,
-	tools/i386/netboot/make_boot_network,
-	tools/i386/netboot/automatic.para.default: as we now have
-	menu.lst.example, i remove automatic.para for more flexibility
-
-	* lang.pm: fix locale support when usingRamdisk
-
-2001/08/22  anoncvs
-
-	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
-	<dxiaoming@mandrakesoft.com>
-	Updated chinese (simplied) translation.
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
-	* network/nfs.pm: pleac perl_checker
-
-	* interactive_gtk.pm: more intelligent setting back the selected value in
-	the clist and ctree
-	(done already for entry)
-	  - fix entries editing causing the cursor to go to the end of line
-	  - select the text
-
-	* c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside
-	otherwise LOG is closed and rpmlib tries to write in it and ...
-
-2001/08/22  anoncvs
-
-	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
-	<dxiaoming@mandrakesoft.com>
-	Updated chinese (simplied) translation.
-
-2001/08/22  fabman
-
-	* share/po/es.po: updated spanish .po files for DrakX and drakbootdisk
-
-2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
-	entries are not given
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
-	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
-	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
-	but ramdisk Read Only
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
-	* bootlook.pm: fix typo
-
-	* network/nfs.pm: pleac perl_checker
-
-	* install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed
-	and rpmlib tries to write in it and ...
-	do not call configurePrinter if no printer is wanted
-
-	* interactive_gtk.pm: more intelligent setting back the selected value in
-	the clist and ctree
-	(done already for entry)
-	  - fix entries editing causing the cursor to go to the end of line
-	  - select the text
-
-	* c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is
-	closed and rpmlib tries to write in it and ...
-
-2001/08/22  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: fixed int and float checking which should accept
-	negative number (added explicit
-	positive too), cleaned code for some perl idioms.
-
-	* install_steps.pm: updated configurePrinter to use foomatic printer
-	configuration.
-
-2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
-	entries are not given
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
-	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
-	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
-	but ramdisk Read Only
-
-2001/08/22  kjx
-
-	* share/po/zh_CN.GB2312.po: review
-	review
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootlook.pm: fix typo
-
-	* install_steps_auto_install.pm: don't have formatPartitions interactive
-	by default
-
-	* install_steps.pm: do not call configurePrinter if no printer is wanted
-
-2001/08/22  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/21  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: added rpcinfo to the tar
-	corrected bad Makefile : rpcinfo-flushed.c comes from tools.
-
-	* standalone/draknet: ergonomy correction
-
-	* network/tools.pm: corrected qq bug
-	corrected bug
-
-	* standalone/net_monitor: log updatede
-	removed memoty leak
-	time connection label
-
-2001/08/21  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved installation code of foomatic (only)
-	if a printer may be chosen.
-
-	* install_any.pm: fixed hd installation for urpmi.
-
-	* printerdrake.pm: slight rewrite of some perl idioms.
-
-2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2001/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5
-
-	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
-	install
-
-	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
-	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-
-	* install_any.pm: cleanup
-
-	* install_steps_interactive.pm: fix '$' in i18n message
-
-2001/08/21  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: removed memoty leak
-	time connection label
-
-	* network/tools.pm, network/modem.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm: generik internet initscript, planq
-	the children again
-
-	* network/adsl.pm: speedtouch config
-	generik internet initscript, planq the children again
-
-2001/08/21  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed hd installation for urpmi.
-
-2001/08/21  kjx
-
-	* share/po/zh_CN.GB2312.po: review
-
-2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix spelling error
-
-	* install_any.pm: cleanup
-	install hotplug if usb (i kept usbd just in case)
-
-	* diskdrake_interactive.pm (Create): force no sorting on filesystems,
-	editable mount points
-
-	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
-	install
-
-	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
-	* install_steps_interactive.pm: fix '$' in i18n message
-
-	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-	umask=0 only if security level < 3
-
-2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
-	nowhere)
-
-2001/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: basic nfs handling in drakx
-	fix bug 4257
-
-	* detect_devices.pm (raidAutoStart): fix for when kmod is there
-
-	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
-	with devfs
-
-	* diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder
-	to umount /tmp/hdimage only when needed
-
-	* Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm,
-	tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in
-	drakx
-
-2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
-	nowhere)
-
-2001/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request
-	of Alex Hulse <axh0@aber.ac.uk> on cooker)
-
-	* detect_devices.pm (raidAutoStart): fix for when kmod is there
-
-	* diskdrake.pm: remove test code
-
-	* fs.pm: fix bug 4257
-
-	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
-	with devfs
-
-	* install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder
-	to umount /tmp/hdimage only when needed
-
-	* interactive_gtk.pm (wait_message_nextW): fix previous text == new text
-	causing no
-	expose_event causing dead loop
-
-2001/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: save fstab on exit
-
-	* fsedit.pm: various typos fix
-
-	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	make the devfs= mount or nomount choice based on raid-based root work
-
-	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	fix diskdrake requiring gtk
-	add some test code
-
-	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
-	removed unless we're in ramdisk
-	various typos fix
-
-	* install_steps_interactive.pm, common.pm, install2.pm, install_any.pm,
-	lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-
-2001/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: major fs.pm rework + adaptation to it
-	don't show nfs/smb/removable in install
-	basic smb handling
-
-	* network/smb.pm: basic smb handling
-
-	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	make the devfs= mount or nomount choice based on raid-based root work
-	disable supermount for the moment
-	major fs.pm rework + adaptation to it
-
-	* install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in
-	usingRamdisk, ensure no files are removed unless we're in ramdisk
-	simplify
-
-	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	fix diskdrake requiring gtk
-	add some test code
-	major fs.pm rework + adaptation to it
-
-	* install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files
-	are removed unless we're in ramdisk
-	major fs.pm rework + adaptation to it
-
-	* partition_table.pm: remove JFS from @important_types (too broken for the
-	moment)
-	remove isSupermount (was unused)
-
-	* common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in
-	usingRamdisk, ensure no files are removed unless we're in ramdisk
-
-	* interactive_gtk.pm (create_ctree): fix focusing (the assumption number
-	of leaves = number of lines is dumb)
-
-	* fsedit.pm: various typos fix
-	major fs.pm rework + adaptation to it
-
-	* bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it
-
-	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
-	removed unless we're in ramdisk
-	various typos fix
-	major fs.pm rework + adaptation to it
-	cleanup
-	basic smb handling
-
-	* diskdrake_interactive.pm: save fstab on exit
-	major fs.pm rework + adaptation to it
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: basic nfs/smb handling in diskdrake
-	fixes and function prototype removing
-
-	* diskdrake.pm: basic nfs/smb handling in diskdrake
-	nicer mount options code (for autofs and supermount)
-
-	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-
-	* interactive_gtk.pm: fix bug in box's height use
-
-	* partition_table.pm, any.pm: fixes and function prototype removing
-
-	* interactive.pm: readd the sorting based on size when no sorting is
-	precised
-
-	* my_gtk.pm (n_line_size): bigger spacing for 'various'
-
-	* standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb
-	handling in diskdrake
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (n_line_size): bigger spacing for 'various'
-	enhance look, fix ask_fileW
-
-	* fs.pm: basic nfs/smb handling in diskdrake
-	fixes and function prototype removing
-	(write_fstab): add notail for reiserfs partitions in any case
-	cleanup mounting options parsing
-
-	* diskdrake.pm: basic nfs/smb handling in diskdrake
-	nicer mount options code (for autofs and supermount)
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-	cleanup mounting options parsing
-
-	* raid.pm: update the raid size as it should be
-
-	* diskdrake_interactive.pm: basic nfs/smb handling in diskdrake
-	less verbose resize_reiserfs
-	update the raid size as it should be
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* fsedit.pm: basic nfs/smb handling in diskdrake
-	update the raid size as it should be
-
-	* network/tools.pm: fix typo
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* partition_table.pm: fixes and function prototype removing
-
-	* install_steps_interactive.pm, standalone/drakautoinst, proxy.pm,
-	install_interactive.pm, network/ethernet.pm, interactive_http.pm,
-	printerdrake.pm, Xconfigurator.pm, network/netconnect.pm,
-	network/network.pm, interactive_newt.pm, network/modem.pm: big renaming
-	of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered
-	in ask_from_
-
-	* standalone/diskdrake: basic nfs/smb handling in diskdrake
-
-	* any.pm: fixes and function prototype removing
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* interactive_gtk.pm: fix bug in box's height use
-	better radiobox keyboard handling
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-	enhance look, fix ask_fileW
-
-	* interactive.pm: readd the sorting based on size when no sorting is
-	precised
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-	do not use devfs with root software raid
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix pass $all_hds->{hds} instead of
-	$all_hds
-
-2001/08/18  siegel
-
-	* share/po/de.po: new german version
-
-	* standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm,
-	network/network.pm, raid.pm: fixed i18n
-
-	* printerdrake.pm: i18n fixes
-
-2001/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
-
-	* standalone/interactive_http/interactive_http.cgi: fix typo
-	restrict the progs callable to a few one.
-
-	* standalone/interactive_http/index.html.pl,
-	standalone/interactive_http/index.html: autogenerate index.html
-
-	* fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice
-	(with IA-like stripping of unused options)
-
-	* c/stuff.xs.pm: is_ext3 is needed in standalone
-	Xtest not needed in standalone
-
-	* c/Makefile.PL: is_ext3 is needed in standalone
-
-	* standalone/interactive_http/miniserv.init,
-	standalone/interactive_http/Makefile: restrict the progs callable to a
-	few one.
-
-	* Makefile.drakxtools: fix po not build, add interactive_http in DIRS
-
-	* modules.pm: move back sunhme in sparc only
-
-2001/08/17  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone
-
-	* interactive.pm, install2.pm: removed no_incon
-
-	* standalone/net_monitor: added no internet connection configured label on
-	button
-
-	* network/netconnect.pm, network/ethernet.pm: corrected connection script
-	creation
-
-2001/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of
-	unused options)
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm,
-	standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm,
-	any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell
-	lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* diskdrake_interactive.pm: add mount options choice (with IA-like
-	stripping of unused options)
-	(part_possible_actions): have possible actions sorted the way we want
-	(Type): fix ext2->ext3 detection
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* modules.pm: move back sunhme in sparc only
-
-2001/08/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* share/rpmsrate: Corrected listing of packages for printing in 'INSTALL'
-	section.
-
-2001/08/17  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-	remove shapecfg and gpa
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of CUPS not being installed during
-	installation
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, install_any.pm: add remove_unused to have more place for mo
-	files
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of CUPS not being installed during
-	installation
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: add remove_unused to have more place for mo files
-	(getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the
-	unmounting at end of install to fail
-
-	* install2.pm: add remove_unused to have more place for mo files
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-
-2001/08/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated French file
-
-	* share/po/sk.po: updated Slovak file
-
-	* lang.pm: Added explicit setting of XFree86 internal XIM for Thai
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop
-	which caused the
-	unmounting at end of install to fail
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-	add kernel in INSTALL
-	s/DrakConf/drakconf/
-
-2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian,
-	Italian and Korean files
-
-	* share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and
-	Serbian files
-
-2001/08/15  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/diskdrake: oops reverting modifs commited by error
-	fix XkbOptions handling
-
-	* standalone/keyboarddrake: fix XkbOptions handling
-
-2001/08/15  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Let the "Options" button only appear when
-	the queue is Foomatic or with PPD (CUPS)
-
-2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean
-	files
-
-	* share/po/es.po: updated spanish and Indonesian files
-
-	* share/po/id.po: updated Indonesian, Italian and Korean files
-	updated spanish and Indonesian files
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: added options
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: oops, fix type of installing X or not
-	  - fix choice of packages when auto install
-
-	* Makefile.config: add drakautoinst in drakxtools standalone binaries
-
-	* install_steps_interactive.pm, install2.pm: 
-	  - fix createBootdisk with auto
-	  - fix setupBootloader with auto
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* install_steps.pm, network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: add number-only device-name handling (eg: "801" is "sda1")
-
-	* interactive_gtk.pm, interactive.pm: 
-	  - small fixes (esp. gtk sensitive handling)
-	  - add ask_file
-	  - add "gtk" preference field
-
-	* my_gtk.pm: remove ask_file (was unused)
-
-	* http.pm: cleanup to please perl_checker
-
-	* Makefile (TAGS): add MDK/Common files
-
-	* services.pm: cleanup (it was working, but wasn't nice)
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected activation button
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: oops, fix type of installing X or not
-	  - fix choice of packages when auto install
-
-	* Makefile.config: add drakautoinst in drakxtools standalone binaries
-
-	* install_steps_interactive.pm, install2.pm: 
-	  - fix createBootdisk with auto
-	  - fix setupBootloader with auto
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* install_steps.pm, network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix typo?
-
-2001/08/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Transfer queues non-interactively when switching
-	between LPD and LPRng.
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected activation button
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm,
-	network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-	* install_any.pm: 
-	  - fix choice of packages when auto install
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix typo?
-
-2001/08/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Removed superfluous lines.
-
-	* printerdrake.pm: Transfer queues non-interactively when switching
-	between LPD and LPRng.
-	Wait message for queue transfer, manufacturer name bugfix
-
-2001/08/13  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage.
-	Removing old version of eepro100 (no stage1).
-
-	* tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage.
-
-2001/08/13  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: corrected 'no icon'
-
-	* network/adsl.pm, network/netconnect.pm: adsl autodetection activated
-	(planq the children)
-
-2001/08/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather
-	than from ..
-	initial revision for drakautoinst
-	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
-	  - use additional fields {auto} and {noauto}, by step, to ease
-	interactive auto install and oem stuff
-	  - in install2.pm, perform each step either from the interactive class
-	or from install_steps, according to the {auto} flag
-	  - id, tell each step to not try to be automatic if {noauto}
-	  - in the install, have auto install bootdisk created in install_any so
-	we can always write a bootdisk (from install_steps) for further use from
-	drakautoinst in standalone
-	  - interactive version of install_steps_auto_install is now inheriting
-	from the interactive class, so we can click on a previous automatic step
-	and have it interactively during an interactive auto install
-
-	* install_steps.pm, install_steps_interactive.pm,
-	install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm:
-	initial revision for drakautoinst
-	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
-	  - use additional fields {auto} and {noauto}, by step, to ease
-	interactive auto install and oem stuff
-	  - in install2.pm, perform each step either from the interactive class
-	or from install_steps, according to the {auto} flag
-	  - id, tell each step to not try to be automatic if {noauto}
-	  - in the install, have auto install bootdisk created in install_any so
-	we can always write a bootdisk (from install_steps) for further use from
-	drakautoinst in standalone
-	  - interactive version of install_steps_auto_install is now inheriting
-	from the interactive class, so we can click on a previous automatic step
-	and have it interactively during an interactive auto install
-
-2001/08/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm:
-	auto_inst enhancements
-
-	* install_steps_interactive.pm, standalone/XFdrake, install_steps.pm,
-	Xconfigurator.pm: really use a class_discard for Xconfigurator::main
-
-	* devices.pm: add /dev/hd[mt] handling
-
-2001/08/13  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/13  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Automatic transfer of queues when changing the spooler.
-	Update printer queue list when exiting during install, so that the
-	"Summary" entry is correct.
-	When one sayd "No" on the test page, the modify dialog was not pointing
-	to the current printer
-
-	* printer.pm: Automatic transfer of queues when changing the spooler.
-	The photo test page was not printed during installation.
-
-	* interactive.pm: Tree lists are sorted again now.
-
-2001/08/13  yduret
-
-	* standalone/drakxconf: removed diskdrake from the choice
-
-2001/08/12  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: longer timeout
-
-2001/08/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix ortograf typo
-
-2001/08/12  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: po->mo is no longer gonna be nasty with us
-
-	* interactive_gtk.pm: clean the nice till fix
-
-	* tools/cvslog2changelog.pl: add till
-
-	* Makefile: ensure locales.tar.bz2 in perl-install/share is build
-	po->mo is no longer gonna be nasty with us
-
-2001/08/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* interactive.pm: Lists get only sorted when the "sort" option is given.
-
-	* printer.pm, printerdrake.pm: Check files before checking RPM database =>
-	Acceleration, waiting windows
-
-2001/08/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
-	share/themes/mdk-bg.png: new theme for beta
-
-	* share/theme-editor.pl: updated
-	now works.
-
-2001/08/11  tkamppeter
-
-	* printer.pm, printerdrake.pm: Restructuring continued and debugged
-
-2001/08/10  dam's  <damien@mandrakesoft.com>
-
-	* share/theme-editor.pl: added theme editor
-
-	* network/tools.pm: corrected password file substitution
-
-	* network/ethernet.pm: remove Data::Dumper
-
-	* network/netconnect.pm: added spped and timeout handling for isdn
-
-	* any.pm: corrected autologin question
-
-	* network/isdn.pm: tomeout option deactivated.
-
-	* standalone/draknet: corrected internet cnfiguration pop up, and some
-	other studds
-	ifup/down ethx, anew pixmap for list
-
-	* my_gtk.pm: removed Datta::Dump use
-
-	* pixmaps/eth_card_mini2.png: added
-
-2001/08/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: small font fix
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* share/po/bg.po: updated Bulgarian file
-	updated pot file
-
-2001/08/10  yduret
-
-	* bootlook.pm: corrected vnew usage (thx gc)
-
-2001/08/09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: added missing use
-	added pixmap for eth. Some factorisation
-
-	* network/tools.pm: added useless function type2interface for future use
-
-	* my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for
-	standalone mode.
-
-	* network/isdn.pm: labels corrections
-
-2001/08/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake,
-	standalone/drakxservices, standalone/net_monitor, standalone/draknet,
-	standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake,
-	standalone/drakxconf, standalone/adduserdrake, standalone/livedrake,
-	standalone/drakboot, standalone/draksec: use vnew the right way
-	everywhere
-
-	* standalone/drakgw: use vnew the right way everywhere
-	  - if package installs fail, redo one by one to know which one failed
-	  - try to not end up with a failing configuration file, if program is
-	brutally stopped
-	  - if unrecognized config file, don't fail, rather ignore it and
-	proceed
-	  - run dhcpd_update feature (if present) after setup of dhcp server
-
-	* share/rpmsrate: put traceroute in network client also, for claudio
-
-2001/08/09  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone.pm, install_any.pm: rename interactive_pkgs in
-	pkgs_interactive
-
-2001/08/09  siegel
-
-	* standalone/interactive_http/miniserv.logrotate,
-	standalone/interactive_http/Makefile: Added logrotate for
-	"/var/log/drakxtools_http.log"
-
-2001/08/09  tkamppeter
-
-	* printer.pm, printerdrake.pm: New structure for queue modification,
-	general structure clean-up
-
-2001/08/09  yduret
-
-	* bootlook.pm: readded in->do_pkg->install (i sux)
-	rewrite in a more drakx fashion
-
-	* my_gtk.pm: added gtkset_sensitive in wrapper..
-
-2001/08/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: typo
-	makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-	* Makefile: skip module CGI in test_pms (perl_checker)
-
-	* fsedit.pm (check_mntpoint): remove /root from directories that "should
-	remain within the root filesystem"
-
-	* proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm,
-	printerdrake.pm, standalone/drakgw, standalone/draknet,
-	network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy,
-	standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake,
-	network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add
-	interactive_pkgs stuff
-
-	* install_steps_interactive.pm: installing foomatic before doing anything
-	about printer
-	add interactive_pkgs stuff
-
-	* Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-	* install_any.pm (remove, remove_nodeps): fix typo
-	makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-2001/08/08  tkamppeter
-
-	* install_steps_interactive.pm: Installation fitted to new printerdrake
-
-	* printer.pm: Different choosable test pages available now
-	Corrected init script calls in the (start|stop|restart)_service
-	functions
-
-	* printerdrake.pm: Different choosable test pages available now
-	Removed superfluous line in install_spooler function
-
-2001/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): add drakxtools-http
-
-2001/08/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: nex features
-
-	* network/netconnect.pm: removed debugging message
-
-	* network/isdn.pm: corrected pkgs use -> require
-
-	* my_gtk.pm: added gtkset_relief
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb
-	removing for re-adding with -kb
-
-2001/08/07  tkamppeter
-
-	* printer.pm, printerdrake.pm: Automatic installation of all needed
-	packages
-
-2001/08/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected label
-
-	* network/netconnect.pm: removed debugging message
-
-	* standalone/net_monitor: nex features
-	added color choice
-	lot of improvments
-
-	* network/isdn.pm: corrected pkgs use -> require
-
-	* my_gtk.pm: added gtkset_relief
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c: say that it's a data read error, when we can't load
-	the ramdisk
-
-	* mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system
-	wide bzlib.h but our own provided one
-
-2001/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/tree/etc/issue: fix distrib number
-
-	* interactive.pm: adding http feature, mainly for standalone tools
-
-	* standalone/miniserv.pem, standalone/miniserv.pl: Initial revision
-	import
-
-	* standalone/interactive_http/miniserv.pl: add interactive_http
-	Initial revision
-
-	* resize_fat/main.pm: fix
-
-	* partition_table.pm: nicer names for journalised fs
-
-	* Makefile.drakxtools, standalone/interactive_http/miniserv.init,
-	standalone/interactive_http/index.html,
-	standalone/interactive_http/interactive_http.cgi,
-	standalone/interactive_http/miniserv.conf,
-	standalone/interactive_http/miniserv.pam,
-	standalone/interactive_http/miniserv.users, Makefile,
-	standalone/interactive_http/Makefile: add interactive_http
-
-	* interactive_http.pm, standalone/interactive_http.cgi: add
-	interactive_http
-	adding http feature, mainly for standalone tools
-
-	* share/diskdrake.rc: have every journalised in darkred
-
-	* c/stuff.xs.pm: add S_IFIFO
-
-	* standalone/interactive_http/miniserv.pem: Initial revision
-
-2001/08/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: debugging, profile coding, isdn 128 debugging
-	corrected gtkradio : shift instead of pop
-
-	* interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift
-	instead of pop
-
-	* network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging,
-	profile coding, isdn 128 debugging
-
-2001/08/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/i386/busybox: try a busybox with better globbing under the SHELL
-
-2001/08/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/de.po: Updates to German file by Peer Dunker <peer46@gmx.net>
-
-	* share/po/vi.po: updated Vietnamese file
-
-2001/08/06  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: kernel_arch removed
-
-	* fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc)
-
-	* interactive_gtk.pm, interactive_newt.pm: cleanup, functions already
-	defined in interactive
-
-2001/08/06  yduret
-
-	* tinyfirewall.pm: use MDK::Common;
-	use network::netconnect;
-
-	* standalone/drakgw: use MDK::Common;
-	use network::netconnect; and update functions call from netconnect
-
-2001/08/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eo.po: updated Esperanto file
-
-2001/08/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: switch to gtk install when
-	interactiveSteps is defined
-
-2001/08/05  tkamppeter
-
-	* printer.pm, printerdrake.pm: Automatic installation and start of the
-	desired printer spooler
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: add tune2fs enabling switching from ext2 to ext3
-
-	* fs.pm, fsedit.pm, partition_table.pm: add ext3 support
-
-	* diskdrake.pm: add ext3 support
-	(Type): handle lossless switch from ext2 to ext3
-
-	* pkgs.pm: make perl_checker happy
-
-	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
-	* common.pm: moved arch() and alike to MDK::Common::System
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): simplify, fix
-	setSelectedFromCompssList not called in
-	expert even the first_time (especially nasty for auto_installs)
-
-	* fs.pm, partition_table.pm, fsedit.pm: add ext3 support
-
-	* diskdrake.pm: add ext3 support
-	(Type): handle lossless switch from ext2 to ext3
-
-	* install_steps_gtk.pm: add the feather feature, but do not enable it
-
-	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
-	(wait_msg doesn't
-	exist anywhere, it must be a fpons typo)
-
-	* pkgs.pm: make perl_checker happy
-
-	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
-	* bootloader.pm: as when lilo is selected, we don't try to install grub,
-	just create the
-	config file in case it may be useful
-
-	* common.pm: moved arch() and alike to MDK::Common::System
-
-	* partition_table_raw.pm: add yaboot detection
-
-	* install_any.pm, share/rpmsrate: create a new flags "X" selected by
-	default, contain what X related packages
-	which were in "SYSTEM"
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): simplify, fix
-	setSelectedFromCompssList not called in
-	expert even the first_time (especially nasty for auto_installs)
-
-	* install_steps_gtk.pm: add the feather feature, but do not enable it
-
-	* bootloader.pm: as when lilo is selected, we don't try to install grub,
-	just create the
-	config file in case it may be useful
-
-	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
-	(wait_msg doesn't
-	exist anywhere, it must be a fpons typo)
-
-	* share/rpmsrate, install_any.pm: create a new flags "X" selected by
-	default, contain what X related packages
-	which were in "SYSTEM"
-
-2001/08/03  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor, network/tools.pm, network/netconnect.pm,
-	network/isdn.pm: debugging, 128Kb/s ISDN
-
-	* Makefile.drakxtools, Makefile: added network pms
-
-2001/08/03  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: typo fix
-	replace isJfs/isXfs/... with isThisFs("jfs"
-
-	* install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs"
-	update_userkderc is now called update_gnomekderc
-
-	* Makefile: better po skipping
-
-	* commands.pm (sync): (re-?)add
-
-	* fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm:
-	replace isJfs/isXfs/... with isThisFs("jfs"
-
-	* fsedit.pm (check_mntpoint): /root should remain within the root
-	filesystem
-
-	* install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr
-	update_userkderc is now called update_gnomekderc
-
-2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: 
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-	* mdk-stage1/doc/TECH-INFOS: 
-	  - small update
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, services.pm, install_interactive.pm,
-	network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of
-	testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk
-	is in ISA of the object
-
-	* partition_table.pm, fsedit.pm, diskdrake.pm: JFS support
-
-2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: 
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-	* mdk-stage1/doc/TECH-INFOS: 
-	  - small update
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: instead of testing if ref($in) or ref($o) contains
-	/gtk/, test if interactive_gtk is in ISA of the object
-	add jfs support
-
-	* install_steps_interactive.pm, services.pm, install_interactive.pm,
-	network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in)
-	or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the
-	object
-
-	* partition_table.pm: JFS support
-	add jfs support
-
-	* fsedit.pm, diskdrake.pm: JFS support
-
-	* tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
-	* fs.pm, share/list: add jfs support
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
-	* fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support
-
-2001/08/01  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: write_on_text writes in blue instead of black
-
-	* network/isdn.pm: typo
-	added de-installation before installateion
-
-	* network/netconnect.pm: translation correction
-
-2001/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
-	auto_installs
-
-	* raid.pm (new): now works with a list of partitions
-
-2001/08/01  tkamppeter
-
-	* printer.pm: Fixed bug in recognizing the printer ID in the Foomatic
-	overview.
-
-2001/08/01  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: write_on_text writes in blue instead of black
-
-	* network/isdn.pm: typo
-	added de-installation before installateion
-
-	* network/netconnect.pm: translation correction
-
-2001/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
-	auto_installs
-
-	* raid.pm (new): now works with a list of partitions
-
-2001/07/31  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: added splash screen between different
-	configurations. Added splash wizard mode
-	added intro step for each configuration type.
-
-	* network/tools.pm: corrected ask_connect_now
-
-	* my_gtk.pm: added write_on pixmap : a function to write text on pixma,
-	using fonts.
-
-	* network/ethernet.pm: added intro step for each configuration type.
-
-2001/07/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: after copying the auto install floppy,
-	sync in case you shall remove the
-	floppy right after the LED switches off yet the kernel decides to not
-	flush
-	everything
-
-	* modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet
-	installs
-
-	* bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux
-	so..)
-
-2001/07/31  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (translate): empty string translation is an empty string
-
-	* install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/
-
-	* share/rpmsrate: add cpio
-	lower gurpmi (5->4)
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale
-	support
-	better handling of locales
-
-	* Makefile.drakxtools (install): s/cp -rf/cp -rfL/   (-L = --dereference,
-	aka always follow symbolic links)
-
-	* install_steps_gtk.pm (installPackages): make $show_advertising a global
-	state (for Vincent Meyer)
-
-	* share/Makefile, Makefile: better handling of locales
-
-	* install_steps_auto_install.pm: remove bad prototype
-
-2001/07/30  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: added cable internet connection selection
-	added internet connection selection in case of multiple configurations
-
-	* network/netconnect.pm: corrected ask_connect_now behaviour
-	corrected ask_connect_now
-	debug
-	added internet connection selection in case of multiple configurations
-
-	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
-	corrected ask_connect_now
-	added internet connection selection in case of multiple configurations
-
-2001/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
-	hdlist files"
-	occurs when the hdlists are in fact not available
-
-	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
-	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
-	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
-	based on installed glibc
-
-	* printer.pm, printerdrake.pm: use MDK::Common
-	i wonder why it was included and Till used an older version without
-	merging?
-
-	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
-	yet)
-
-	* share/rpmsrate: raise rxvt (4->5)
-	lower rpmdrake & harddrake (5->4)
-	remove rootfiles (unneeded)
-
-	* Makefile: use -excludeMDK::Common::Globals for perl_checker
-	automatic handling of locales.tar.bz2 based on installed glibc
-
-2001/07/30  tkamppeter
-
-	* printer.pm, printerdrake.pm: In beginners mode one chooses only the
-	printer, not the driver (default driver)
-
-2001/07/30  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: debug
-	added internet connection selection in case of multiple configurations
-
-	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
-	added internet connection selection in case of multiple configurations
-
-	* network/ethernet.pm: added cable internet connection selection
-	added internet connection selection in case of multiple configurations
-
-2001/07/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h:
-	have a memory limit also for Rescue (different one)
-
-2001/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: use MDK::Common
-	i wonder why it was included and Till used an older version without
-	merging?
-
-	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
-	yet)
-
-	* share/rpmsrate: raise rxvt (4->5)
-	lower rpmdrake & harddrake (5->4)
-	remove rootfiles (unneeded)
-
-	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
-	hdlist files"
-	occurs when the hdlists are in fact not available
-
-	* Makefile: use -excludeMDK::Common::Globals for perl_checker
-	automatic handling of locales.tar.bz2 based on installed glibc
-
-	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
-	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
-	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
-	based on installed glibc
-
-2001/07/28  tkamppeter
-
-	* printer.pm, printerdrake.pm: Support for PPD files of PostScript
-	printers (when CUPS is used)
-
-2001/07/27  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree
-	is seen as a package.
-
-	* interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on
-	cancel (previously always 1).
-	added a before leaving code to clean added reference (else it seems to
-	bahave
-	strangely on changing steps).
-	fixed wrong reference to added icons to ask_browse_tree_info_refW.
-
-	* services.pm: allow cancel on services which do not change anything.
-
-	* install_steps_interactive.pm: changed warn dialog to okcancel dialog
-	when asking user to insert Boot floppy
-	used or Update Modules floppy (die may cause to rerun install else).
-
-2001/07/27  gbeauchesne
-
-	* install_steps_gtk.pm: 
-	  - install_steps_gtk.pm (launchX) : create /var/log, if not existent,
-	for
-	XFree86.log
-
-2001/07/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: allow to escape from Update Modules if you don't
-	want to insert an ext2 floppy
-	Disk -> Floppy for Update Modules disk
-
-2001/07/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm,
-	Xconfigurator.pm: last of sync with PPC beta mods
-
-2001/07/27  tkamppeter
-
-	* standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake
-	changed to use Foomatic, driver options, spooler change
-
-2001/07/26  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn.pm: added firmware loading/configuration
-	not loading the module at detection.
-
-	* standalone/draknet: MDK::common correction
-
-	* modules.pm: added default option id="HiSax" to isdn module
-
-2001/07/26  fcrozat
-
-	* share/po/fr.po: Fix spelling of 'molette'
-
-2001/07/26  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: added blank and updatemodules options to DrakX.
-
-	* bootloader.pm: added prioritary kernel entry 'default' as the kernel
-	typically copied from a
-	modified blank.img file with a kernel (no initrd.img necessary to
-	build).
-	This kernel takes precedance over any other kernel.
-
-	* install_steps_interactive.pm: really fixes Diskette with Floppy.
-	fix typo as Diskette to Floppy.
-	add support for new modules load as described by GG.
-
-	* install_steps.pm: fixed some silly typo and tiny bugs.
-	fixed typo as Diskette to Floppy.
-	add support for modified blank.img floppy and Update Modules floppy.
-	In first case copy kernel to /boot/vmlinuz-default to be taken into
-	account by
-	bootloader suggestion method.
-	In second case, check installed kernel and update any modules listed in
-	the
-	Update Modules floppy.
-
-2001/07/26  gbeauchesne
-
-	* bootloader.pm: 
-	  - Don't set "lba32" on ia64
-
-2001/07/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass
-	"--blank" to DrakX when module loading is disabled
-	  - add "changedisk" feature
-	  - add "updatemodules" feature
-
-	* mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h: 
-	  - add "changedisk" feature
-	  - add "updatemodules" feature
-
-	* mdk-stage1/probing.c: silently load usb controllers
-
-2001/07/25  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: fixed new network organization
-
-	* standalone/net_monitor: updated. Profile handling.
-
-	* network/isdn_consts.pm: updated ISDN detection. Added firmware handling
-	and drivers other than hisax
-
-2001/07/25  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed no test (or die test) to void package read on depslist
-	(allowed to keep
-	package indexing good on multi-arch).
-	cleaned code to examine depslist.ordered and packages list.
-
-	* rescue/make_rescue_img: fixed to use perl-MDK-Common.
-
-	* tools/syncrpms: fixed still missing rpmtools:: before a version_compare
-	...
-
-2001/07/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: small typo
-
-	* mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting
-
-2001/07/25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile (install): build mo's
-
-	* commands: move to MDK::Common, bool->to_bool
-
-	* common.pm: do not export sync, keep it in common (esp. so that it
-	doesn't conflict with my_gtk::sync
-	(removeXiBSuffix): add TB (tera)
-
-	* share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common
-
-	* share/verify_modules.pl: new common syntax
-
-	* Makefile: 
-	  - temporary hack to have at least good UTF-8 based locales (otherwise
-	rpmlib segfaults)
-	  - touch share/po/*.po, so that they are not rebuilded (pablo takes
-	care of them)
-
-	* share/list: add MDK::Common::Globals
-
-	* partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm,
-	install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not
-	export sync, keep it in common (esp. so that it doesn't conflict with
-	my_gtk::sync
-
-2001/07/25  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: add decriptions for integrated Apple
-	Network/SCSI hardware
-
-2001/07/24  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm:
-	corrected speed fax + PCI, updated configuration
-
-2001/07/24  daouda
-
-	* bootlook.pm: better runlevel handling -> persistent level choice
-
-2001/07/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/07/24  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm: move to MDK::Common, bool->to_bool
-	fix syntax
-	removed/renamed unused/seldom-used functions
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* swap.pm: temporary hack to have at least good UTF-8 based locales
-	(otherwise rpmlib segfaults)
-	move to MDK::Common, bool->to_bool
-
-	* unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the
-	functional alternative to chomp (and works on lists)
-
-	* globals.pm, perl2fcalls: 
-	  - globals is now MDK::Common::Globals
-	  - perl2fcalls is now /usr/bin/perl_checker
-
-	* install_steps_gtk.pm: move to MDK::Common, bool->to_bool
-	move to MDK::Common, bool->to_bool
-	removed/renamed unused/seldom-used functions
-
-	* common.pm: move to MDK::Common, bool->to_bool
-	cleanup (remove unused stuff and dangerous prototypes)
-	removed/renamed unused/seldom-used functions
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* network/tools.pm, network/adsl.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm, network/modem.pm: 
-	  - globals is now MDK::Common::Globals
-	  - perl2fcalls is now /usr/bin/perl_checker
-	move to MDK::Common, bool->to_bool
-
-	* partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm,
-	standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm,
-	partition_table_mac.pm, standalone/mousedrake, devices.pm,
-	install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm,
-	install_steps_stdio.pm, loopback.pm, resize_fat/any.pm,
-	standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm,
-	interactive_gtk.pm, standalone/drakxservices, fsedit.pm,
-	network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm,
-	resize_fat/directory.pm, standalone/net_monitor,
-	install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm,
-	lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec,
-	standalone/drakxconf, resize_fat/info_sector.pm,
-	standalone/adduserdrake, sbus_probing/main.pm, printer.pm,
-	partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm,
-	Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm,
-	standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm,
-	interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm,
-	bootloader.pm: move to MDK::Common, bool->to_bool
-
-	* services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool
-	removed/renamed unused/seldom-used functions
-
-	* standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm,
-	detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* Makefile: temporary hack to have at least good UTF-8 based locales
-	(otherwise rpmlib segfaults)
-	move to MDK::Common, bool->to_bool
-	move to MDK::Common, bool->to_bool
-
-2001/07/23  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm, network/tools.pm, network/isdn_consts.pm,
-	network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light.
-	Only 64kb/s and still some debuf stuff to be fixed.
-
-2001/07/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files
-
-2001/07/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: cleanup
-
-	* c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile,
-	tools/make_mdkinst_stage2, lang.pm, share/po/Makefile,
-	share/po/.cvsignore: do not use the po's directly. Use mo's through
-	gettext
-
-2001/07/22  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/isdn.pm: updated isdn config, moved
-	isdn_data from netconnect_const to isdn_const
-	big work on isdn. Not finished
-
-	* modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm:
-	big work on isdn. Not finished
-
-	* network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn
-	config, moved isdn_data from netconnect_const to isdn_const
-
-2001/07/20  François Pons  <fpons@mandrakesoft.com>
-
-	* docs/README.pxe: initial release, dhcpd and tftpd only.
-
-2001/07/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/el.po: updated Greek file
-
-2001/07/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl
-
-	* lang.pm: fix
-	(load_po): enhance readability
-
-	* share/po/fake_c.pl: cleanup
-	externalize the pm 2 pm_.c in fake_c.pl
-
-	* common.pm (translate): basic plural forms handling (not finished)
-
-	* help.pm: fix missing ``"''
-
-	* bootloader.pm: fix
-	(install_lilo): order fat partitions first
-
-2001/07/19  dam's  <damien@mandrakesoft.com>
-
-	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
-	share/help.png: new color
-
-	* network/netconnect.pm: correct bug. thanx to the little stagiaire.
-
-2001/07/19  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
-	graphic logo for 8.1
-
-2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
-	share/po/eu.po: updated Croatian file
-
-2001/07/19  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
-	graphic logo for 8.1
-
-	* Xconfigurator.pm: fixed problable freeze on pci probe.
-
-2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
-	share/po/eu.po: updated Croatian file
-
-2001/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* globals.pm: no strict 'refs' instead of 'vars'
-
-	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
-	ask_install_simple (obsolete)
-
-	* install_steps_auto_install.pm: fix exit install in graphical
-	auto_install's
-
-2001/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based
-	on Michael Brown <mbrown@fensystems.co.uk> patch:
-	  - enables graphical steps in auto_installs for more than gtk
-	  - various cleanup
-
-	* globals.pm: no strict 'refs' instead of 'vars'
-
-	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
-	ask_install_simple (obsolete)
-
-2001/07/18  mbadaire
-
-	* modules.pm, install_any.pm, bootloader.pm: IA64 adaptation
-
-2001/07/18  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm, install_steps.pm, install_steps_interactive.pm,
-	tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm,
-	diskdrake.pm: roll back some changes from PPC beta - OldWorld vs
-	NewWorld bootloader
-	modem detection on ttyS0, new sound module in 2.4.4
-
-2001/07/17  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4
-	and S3 ViRGE on reboot
-	with Aurora).
-
-	* Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test
-	for these card.
-
-2001/07/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no
-	more used)
-
-	* keyboard.pm: small keyboard changes
-
-2001/07/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-2001/07/12  François Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
-	fsck succeeded in
-	fixing partition and now is ok).
-
-	* run_program.pm: changed exit code of failed exec in rooted to 128
-	instead of 1 (may clash with
-	exit code of fsck else).
-
-	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/12  François Pons  <fpons@mandrakesoft.com>
-
-	* interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW
-	(default).
-
-	* services.pm: reworked to use new service layout for install.
-
-	* install_steps_gtk.pm: use common code for tree with info dialog
-	(individual package selection).
-
-	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
-	fsck succeeded in
-	fixing partition and now is ok).
-
-	* interactive_gtk.pm: merging common code for individual package selection
-	and service to create
-	ask_browse_tree_info_refW, added featrures for group icon always
-	up-to-date
-	(take some memory but not too much, not used if flat model).
-
-	* run_program.pm: changed exit code of failed exec in rooted to 128
-	instead of 1 (may clash with
-	exit code of fsck else).
-
-	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/10  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build,
-	define TIOCSCTTY, Makefile mods
-
-2001/07/09  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added multiple tries if a transaction of only one package
-	fails.
-
-	* install_any.pm: added LDAP support for authentication.
-
-	* install_steps_interactive.pm: added LDAP support for password
-	authentication, updated root password window look.
-
-	* bootloader.pm: fixed compilation error.
-	removed compilation error, the resolution is not quite good and may be
-	reworked :-)
-
-	* help.pm: updated root password help.
-
-2001/07/09  mbadaire
-
-	* bootloader.pm: modify lilo.conf to elilo.conf if arch ia64
-
-	* common.pm: Add IA64 support
-
-2001/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
-	boot partition is
-	set correctly again
-
-2001/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
-	boot partition is
-	set correctly again
-
-2001/07/06  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
-	still causes dead
-	lock and may not reproduce correct list. take care of choice that need
-	to be
-	examined before else another package may be chosen if choice is not
-	satisfied
-	when selecting packages.
-
-	* install_any.pm: change all 8 space into a tabulation, this is simple and
-	may change visual
-	aspect but it gives correct output and filesize by 40%.
-
-2001/07/06  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
-	still causes dead
-	lock and may not reproduce correct list. take care of choice that need
-	to be
-	examined before else another package may be chosen if choice is not
-	satisfied
-	when selecting packages.
-
-	* install_any.pm: change all 8 space into a tabulation, this is simple and
-	may change visual
-	aspect but it gives correct output and filesize by 40%.
-
-2001/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl: some workarounds
-
-2001/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl: some workarounds
-
-2001/07/05  François Pons  <fpons@mandrakesoft.com>
-
-	* keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a
-	laptop is detected.
-
-2001/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: add usb net descriptions
-
-2001/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (file2part): created
-
-	* any.pm: ia64 bootloader configuration adaptations
-
-	* bootloader.pm: typo fix
-	ia64 bootloader configuration adaptations
-
-2001/07/04  dam's  <damien@mandrakesoft.com>
-
-	* globals.pm: added error handling
-
-	* network/netconnect.pm, network/ethernet.pm: modularized. It compiles,
-	runs, and works for some stuff.
-	modularization continuated
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-	corrected
-
-	* standalone/draknet: corrected
-
-	* network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and
-	works for some stuff.
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-	corrected
-
-	* network/network.pm: modularized. It compiles, runs, and works for some
-	stuff.
-	modularization continuated
-
-	* network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and
-	works for some stuff.
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-
-	* docs/net_object_class.fig: updated doc
-
-2001/07/04  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added missing last Card read from Cards+ file.
-	allow S3 card to have VideoRam uncommented, fix 86c368 video driver that
-	seems
-	needing VideoRam too.
-	fixed need of video ram if 86c368 and S3 ViRGE.
-
-	* install_any.pm: another too wide string truncated to 80 chars.
-	make auto_inst.cfg file no longer than 80 chars wide.
-
-	* install_steps_interactive.pm: added back timezone settings (thanks
-	FredC).
-
-2001/07/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*"
-
-	* mdk-stage1/newt-frontend.c: very nice things happen when you hardcode
-	arrays to a too small value
-
-	* docs/HACKING: update -d in order to get all the directories...
-
-2001/07/04  mbadaire
-
-	* tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64,
-	tools/ia64/e2fsck.shared: Ia64 Adaptation
-
-	* install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list,
-	share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64
-	adaptation
-
-2001/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (selected_leaves): fix dead-loop
-	(selected_leaves): make it work with loops (eg: mandrake_desk loops with
-	control-center resulting on none of them being a leaf)
-
-	* perl2fcalls: check exclude_uses before reporting bad use of "use"
-	exclude module globals from use's to look at
-
-	* globals.pm (import): yet another fix
-	fix a pb when init is called before another import
-	typo correction
-	enhanced: shared values are grouped together based on a name
-	module to share constant values between modules
-
-	* fsedit.pm: add /boot/efi in suggestions for ia64
-
-	* install_interactive.pm, install_steps.pm: fix typo
-	verify a /boot/efi partition exists
-
-	* Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list,
-	share/list.sparc: remove busybox as default shell. Only use it as the
-	interactive shell on tty2
-
-2001/07/03  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect_consts.pm, network/tools.pm,
-	network/modem.pm, network/netconnect.pm, network/isdn.pm: network
-	subsystem now compiles. Enjoy
-
-	* docs/net_object_class.fig: documentation about net modules structure
-
-2001/07/03  François Pons  <fpons@mandrakesoft.com>
-
-	* network/netconnect.pm: fix another dam's sucks
-	fix dam's sucks
-
-	* network/netconnect_consts.pm, Makefile.config: fix dam's sucks
-
-	* standalone/XFdrake: expert is allowed to choose frame buffer.
-
-	* install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage
-	package selection file used by
-	auto_install too from packages tree directly on floppies.
-
-	* share/floppy.png: updated size to 16x22 to be more aligned.
-	for loading/saving packages selection.
-
-	* install_any.pm: modified g_default_packages to be used from package tree
-	save on floppy.
-
-	* install_steps_gtk.pm: added Load/Save on floppy.
-	added improve choice of package, well not very usefull but asked by
-	higher
-	people :-)
-
-2001/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/rp-pppoe/gui/html/props-basic.png,
-	mdk-stage1/rp-pppoe/gui/html/props-options.png,
-	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
-	mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop
-
-	* modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore,
-	mdk-stage1/usb-resource/Makefile,
-	mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile,
-	mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support
-	for install from USB Network Adapters
-
-2001/07/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po,
-	share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po,
-	share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po,
-	share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po,
-	share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file
-
-2001/07/03  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm (configureTimezone): propose a list of NTP servers
-	(ntp_server): fix
-	add ntp handling
-
-	* fs.pm (mount): fix fsck.ext2'ing
-	(mount): add fsck.ext2 before ext2-mounting
-
-	* share/themes/DarkMarble-gloom2.png: re-adding with -kb
-	re-adding with -kb
-
-	* pixmaps/user.png: re-adding with -kb
-	removing for re-adding with -kb
-	re-adding with -kb
-	removing for re-adding with -kb
-
-	* share/themes/blueHeart-button4.png, share/reload.png,
-	share/themes/focus.png, share/themes/DarkMarble-button3_in.png,
-	share/logo-mandrake.png, share/themes/marble3d-check1.png,
-	share/themes/blueHeart-button_def.png, share/rpm-semiselected.png,
-	share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png,
-	share/rpm-installed.png, share/themes/marble3d-button1.png,
-	share/logo-mandrake_sav.png, share/themes/mdk-button1.png,
-	share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png,
-	share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png,
-	share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png,
-	pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png,
-	share/themes/marble3d-button4.png, pixmaps/bootloader.png,
-	share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png,
-	share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png,
-	share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png,
-	share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png,
-	pixmaps/rootpasswd.png, share/help.png,
-	share/themes/DarkMarble-check_on.png,
-	share/themes/blueHeart-button1.png, pixmaps/keyboard.png,
-	pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png,
-	share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png,
-	pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* install_any.pm, install_steps.pm: add ntp handling
-
-	* tools/addchangelog.pl: reverted the last erroneous modif
-	re-adding with -kb
-
-	* tools/ntp_servers.pl: get a formatted list of NTP servers from an
-	authorised source
-
-	* install_steps_interactive.pm (doPartitionDisks): better error message
-	when no root partition is found
-	(configureTimezone): propose a list of NTP servers
-	add ntp handling
-
-	* docs/comparisons: re-adding with -kb
-
-2001/07/02  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: new network sources reorganizationCVS:
-	----------------------------------------------------------------------
-
-	* share/list: added modinfo
-
-	* modparm.pm: syntax correction
-
-	* network/netconnect_consts.pm, network.pm, standalone/draknet,
-	network/tools.pm, netconnect.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm, network/adsl.pm,
-	network/network.pm, network/modem.pm, netconnect_consts.pm: new network
-	sources reorganization
-
-2001/07/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: update po files
-
-2001/07/02  Pixel  <pixel@mandrakesoft.com>
-
-	* crypto.pm: remove buggy prototype
-
-	* share/po/Makefile: yet even better i18n strings extraction
-	  - fix to add some missing messages
-	  - add more verif
-
-	* c/stuff.xs.pm: use size_t instead of int where it should
-
-	* Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in
-	XF3)
-
-	* share/po/b_dump_strings.pm: high level i18n messages getting. only
-	partial stuff. Used only for verification
-
-	* perl2fcalls: add handling of using pkg::func when func is provided by
-	pkg2 use'd by pkg
-
-2001/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-2001/06/25  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: switch from llseek to lseek64
-
-2001/06/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/06/22  François Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: take care of enterprise kernel if installed.
-
-	* install_any.pm: automagically install kernel-enterprise if memory is
-	greater than 800MB.
-
-2001/06/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzyise
-
-2001/06/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, install_steps_interactive.pm,
-	share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/
-
-2001/06/21  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added minimal support for rpmtools >= 3.0
-
-2001/06/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: generate_automatic_stage1_params: listize
-	use busybox for the shell of stage2
-
-	* mdk-stage1/Makefile: defaults to not spawn shell
-
-	* mdk-stage1/hack: kloug
-
-	* Makefile, tools/i386/busybox, share/list.ppc, share/list,
-	share/list.alpha, share/aliases: use busybox for the shell of stage2
-
-2001/06/21  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-	s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-	* genmodparm: remove duplicate, look in gi/tools
-
-	* standalone/printerdrake, install2, docs/HACKING, tools/genmodparm,
-	mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README,
-	standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit,
-	mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm,
-	mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl,
-	bootloader.pm: s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-	* mdk-stage1/make_boot_img: remove GG sux
-	s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-2001/06/11  dam's  <damien@mandrakesoft.com>
-
-	* proxy.pm: updated
-	typoCVS:
-	----------------------------------------------------------------------
-	proxy
-
-	* my_gtk.pm: added gtkset_layout
-
-	* standalone/drakproxy: corrected CVS:
-	----------------------------------------------------------------------
-	updated
-	perlised
-
-	* interactive.pm: no icon if wizard
-
-2001/06/11  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: added some bigger memory range.
-
-	* Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when
-	modifying mga_dma = 0
-	really fix the Matrox G200 PCI card acceleration using XF3, by disabling
-	DMA on
-	/etc/X11/glx.conf
-	added magic probe of resolution found, if the probed resolution seems
-	strange
-	according to memory available, it try to let the user select the right
-	resolution and depth.
-
-	* install_steps.pm, printer.pm: applied patches given for printer
-	configuration bug reported by David Eastcott.
-
-2001/06/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: have PPP drivers in net_raw rather than in net
-	add PPP modules for 'net' drivers
-
-	* rescue/tree/etc/rc.sysinit: minor changes
-
-	* rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much
-	as possible before rebooting the rescue
-
-	* mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c,
-	mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h,
-	mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c,
-	mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl
-	pppoe installation available
-	Initial revision
-	import initial ppp sources
-
-	* mdk-stage1/dhcp.c: change location of error message when no reply
-	received
-
-	* mdk-stage1/rp-pppoe/man/pppoe-relay.8,
-	mdk-stage1/rp-pppoe/configs/firewall-masq,
-	mdk-stage1/rp-pppoe/gui/html/props-nic.png,
-	mdk-stage1/rp-pppoe/src/pppoe-sniff.c,
-	mdk-stage1/rp-pppoe/configs/firewall-standalone,
-	mdk-stage1/rp-pppoe/gui/html/tkpppoe.html,
-	mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui,
-	mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8,
-	mdk-stage1/rp-pppoe/scripts/adsl-start.in,
-	mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go,
-	mdk-stage1/rp-pppoe/man/pppoe.8,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
-	mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in,
-	mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c,
-	mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c,
-	mdk-stage1/rp-pppoe/man/pppoe-server.8,
-	mdk-stage1/rp-pppoe/configs/pppoe.conf,
-	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
-	mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh,
-	mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure,
-	mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c,
-	mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c,
-	mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h,
-	mdk-stage1/rp-pppoe/scripts/adsl-init.in,
-	mdk-stage1/rp-pppoe/rp-pppoe.spec,
-	mdk-stage1/rp-pppoe/scripts/adsl-connect.in,
-	mdk-stage1/rp-pppoe/man/pppoe.conf.5,
-	mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in,
-	mdk-stage1/rp-pppoe/man/adsl-start.8,
-	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
-	mdk-stage1/rp-pppoe/rp-pppoe-gui.spec,
-	mdk-stage1/rp-pppoe/gui/html/props-basic.png,
-	mdk-stage1/rp-pppoe/man/adsl-status.8,
-	mdk-stage1/rp-pppoe/configs/pppoe-server-options,
-	mdk-stage1/rp-pppoe/man/adsl-connect.8,
-	mdk-stage1/rp-pppoe/scripts/adsl-setup.in,
-	mdk-stage1/rp-pppoe/scripts/adsl-stop.in,
-	mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c,
-	mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c,
-	mdk-stage1/rp-pppoe/README,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
-	mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1,
-	mdk-stage1/rp-pppoe/scripts/adsl-status,
-	mdk-stage1/rp-pppoe/man/adsl-setup.8,
-	mdk-stage1/rp-pppoe/gui/html/props-options.png,
-	mdk-stage1/rp-pppoe/src/configure.in,
-	mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c,
-	mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in,
-	mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c,
-	mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision
-	import initial sources from rp-pppoe v3.0
-
-	* mdk-stage1/Makefile: change handling of .depend in Makefile
-	have adsl pppoe installation available
-
-	* mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD
-	that will show us '**' for passwords
-
-	* mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore,
-	mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore,
-	mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c,
-	mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile,
-	mdk-stage1/make_boot_img: have adsl pppoe installation available
-
-	* detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to
-	autodetect raid arrays (still needs a kernel that implements the
-	ioctl..)
-
-	* tools/Makefile: perl 5.6.1 now
-
-	* mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from
-	my code anymore, expect the bootloader to set the parameter correctly
-
-	* mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README,
-	mdk-stage1/ppp/solaris/Makefile.sol2,
-	mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down,
-	mdk-stage1/ppp/solaris/Makefile.sol2-64,
-	mdk-stage1/ppp/include/net/ppp_defs.h,
-	mdk-stage1/ppp/pppstats/Makefile.sunos4,
-	mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c,
-	mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h,
-	mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux,
-	mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c,
-	mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2,
-	mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h,
-	mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2,
-	mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc,
-	mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c,
-	mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c,
-	mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c,
-	mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h,
-	mdk-stage1/ppp/svr4/ppp_comp_mod.c,
-	mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c,
-	mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer,
-	mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h,
-	mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h,
-	mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c,
-	mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets,
-	mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8,
-	mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2,
-	mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile,
-	mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4,
-	mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX,
-	mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c,
-	mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh,
-	mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c,
-	mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8,
-	mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h,
-	mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h,
-	mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c,
-	mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs,
-	mdk-stage1/ppp/pppd/sys-linux.c.wtmp,
-	mdk-stage1/ppp/include/linux/if_pppvar.h,
-	mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux,
-	mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam,
-	mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3,
-	mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c,
-	mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c,
-	mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile,
-	mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8,
-	mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h,
-	mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ,
-	mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c,
-	mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2,
-	mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh,
-	mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL,
-	mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c,
-	mdk-stage1/ppp/pppd/plugins/passprompt.c,
-	mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c,
-	mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback,
-	mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP,
-	mdk-stage1/ppp/pppd/Makefile.sol2,
-	mdk-stage1/ppp/pppd/plugins/minconn.c,
-	mdk-stage1/ppp/etc.ppp/options.options,
-	mdk-stage1/ppp/pppdump/Makefile.linux.makeopt,
-	mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem,
-	mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System,
-	mdk-stage1/ppp/etc.ppp/chap-secrets,
-	mdk-stage1/ppp/pppstats/Makefile.linux,
-	mdk-stage1/ppp/sample/pap-secrets,
-	mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8,
-	mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on,
-	mdk-stage1/ppp/include/linux/ppp_defs.h,
-	mdk-stage1/ppp/scripts/chatchat/chatchat.c,
-	mdk-stage1/ppp/scripts/chatchat/README,
-	mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master,
-	mdk-stage1/ppp/svr4/Makedefs,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c,
-	mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h,
-	mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2,
-	mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc,
-	mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c,
-	mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux,
-	mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer,
-	mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux,
-	mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master,
-	mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h,
-	mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c,
-	mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h,
-	mdk-stage1/ppp/pppd/Makefile.linux.makeopt,
-	mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh,
-	mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add,
-	mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h,
-	mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c,
-	mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf,
-	mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h,
-	mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top,
-	mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c,
-	mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c,
-	mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h,
-	mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top,
-	mdk-stage1/ppp/svr4/Makefile.svr4,
-	mdk-stage1/ppp/pppd/plugins/Makefile.linux,
-	mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision
-	import initial ppp sources
-
-2001/06/11  odin
-
-	* standalone/drakproxy: first import of drakproxy
-
-2001/06/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): don't check /usr/bin/urpmi, better check
-	/usr/sbin/urpmi.update
-
-	* commands.pm (grep_): add a missing semi-colon
-
-	* share/compssUsers: remove NIS which is handled by DrakX (titi sucks)
-
-2001/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit,
-	rescue/Makefile: 
-	  - add 'guessmounts' that mimics RH's detecting of partitions when
-	rescue starts
-
-2001/06/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-	* share/po/ru.po, share/po/DrakX.pot: updated Russian file
-
-2001/06/10  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/guessmounts: pixelization (tested!)
-
-	* install_any.pm (g_auto_install): more comments in auto_inst.cfg file
-
-2001/06/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list.i386: rescuept is in /sbin now
-
-	* share/list: rescuept in /sbin now
-
-2001/06/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: don't wait on upping lo interface
-
-	* mdk-stage1/modules.c: fix minor bug detecting when modules are present
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c:
-	i need working random suite for ppp with dietlibc
-
-	* mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two
-	stage1 processes!
-
-2001/06/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-2001/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): notail in any case
-
-	* tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst,
-	tools/i386/netboot/.cvsignore: menu.lst is now a local file created from
-	the example
-
-	* share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1
-
-	* Makefile: fix
-
-2001/06/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file
-
-2001/06/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: use -FULL postfix for common .c files targetting
-	stage1-full
-
-	* mdk-stage1/stage1.c: minor fix
-
-	* mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs,
-	i want to link against glibc too
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c:
-	
-	  - have strncat behave the same way as in glibc
-	  - declare that we're using the DIETLIBC in include/stdlib.h, so I can
-	change my mind in "dns.c" to handle broken glibc which is not capable of
-	doing name resolution with a static binary
-
-	* mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c,
-	mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c,
-	mdk-stage1/url.c, mdk-stage1/network.h: 
-	  - first draft of adsl support
-	  - get back some code for supporting broken glibc unable to resolve
-	when linked statically
-
-	* mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c,
-	mdk-stage1/dietlibc/lib/tcsetattr.c,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/include/netdb.h,
-	mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe
-	stuff compile better
-
-2001/05/31  daouda
-
-	* bootlook.pm: add runlevel chooser feature
-
-2001/05/31  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: check presence of files from list and list.ARCH
-
-	* Makefile (get_needed_files): exit with error message if files from
-	share/list (and
-	share/list.ARCH) are missing
-
-	* install2.pm: hide step formatPartitions when upgrading
-
-2001/05/30  mbadaire
-
-	* mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c,
-	mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile,
-	mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c: 
-	  - allow build on ia64
-	  - have CFLAGS centralized in Makefile.common (should help ports such
-	as alpha)
-	  - better looking sub makefiles
-
-2001/05/30  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.drakxtools (install): ensure pm's in subdirs don't have
-	/use(diagnostics|vars|strict)/
-
-2001/05/29  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
-	name for lpr.
-
-2001/05/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/compssUsers: add NIS client to network clients
-
-2001/05/29  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
-	name for lpr.
-
-2001/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly
-	rewritten..)
-
-2001/05/25  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix
-	bootstrap creation, formatting sequence
-
-	* install_steps_interactive.pm: fix bootstrap information screen back to
-	orig with missing ":" - PPC
-	add hfs support to rescue - PPC, fix bootstrap creation, formatting
-	sequence
-
-2001/05/25  siegel
-
-	* share/po/de.po: updated time
-	moved to UTF-8
-
-2001/05/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-2001/05/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): autoExitInstall set if not replay (was
-	the opposite)
-
-2001/05/23  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/list: add scd0...
-
-2001/05/22  siegel
-
-	* share/po/de.po: updates
-
-2001/05/21  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation
-	of PPC boot CD on x86 platform
-
-2001/05/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: 
-	  - better detect when IP is not good
-	  - error_msg when netmask seems invalid
-	  - don't log too much `guessing netmask'
-
-	* mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits
-	each
-
-2001/05/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed parted that ask for confirmation if partition
-	table is not right (MAXDATA
-	for example), this cause parted to ignore warning.
-	added blank space between partition windows and linux to help resolving
-	above case.
-	fixed hole in partitionning (need testing), use fdisk to get disk
-	geometry and
-	create partition that matches cylinder boundaries (no more
-	approximation).
-	make sure to create all partitions including /home.
-
-2001/05/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers
-	don't write nonsense code to separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/probing.c: unify user notification of network and scsi
-	devices that make load of drivers
-	don't write nonsense code to separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
-	mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c,
-	mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to
-	separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/frontend-common.c: plop
-
-2001/05/16  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png,
-	pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png,
-	pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png,
-	pixmaps/bootdisk.png, pixmaps/services.png: added icons
-
-	* standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot,
-	standalone/draksec, standalone/drakxservices, standalone/drakgw,
-	standalone/XFdrake, standalone/adduserdrake: added icon management
-
-	* my_gtk.pm, interactive.pm: icons management
-
-	* install2.pm: added icons management
-
-	* standalone/draknet: added icon managment
-
-	* pixmaps/printer.png: added icon
-
-2001/05/16  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added support for /var creation, and more specific
-	package selection for server.
-	Include option support by VERSION file.
-
-2001/05/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h,
-	mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README,
-	mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff
-	and code from stage1
-
-2001/05/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po:
-	updated Turkish file
-
-2001/05/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: fix yet again DrakX.pot making
-
-	* partition_table.pm: re-add reiserfs as it should
-	add xfs
-
-2001/05/15  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be
-	usefull.
-
-2001/05/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: libresolv deprecated in GLIBC
-	have stage1-full with pcmcia also compile with dietlibc, cool!
-
-	* mdk-stage1/network.c: fix guess netmask
-	configure_net_device is only used internally
-
-	* mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling
-	interface (use of enum rather than guessing single numbers..)
-
-	* mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines
-
-	* mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile
-	with dietlibc, cool!
-	  - build glibc and dietlibc targets
-	  - bzero string buffer before sscanf call (dietlibc implementation)
-	  - verify returns of ioperm so that I can use it in test mode
-
-	* mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/dietlibc/include/sys/io.h,
-	mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia
-	also compile with dietlibc, cool!
-
-	* mdk-stage1/stage1.c: a bit of size reduction plus some language change
-	blurk
-
-	* mdk-stage1/WHY-DIETLIBC: advocate dietlibc
-
-	* mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author
-
-	* mdk-stage1/disk.c: bzero string buffer before sscanf call, security for
-	dietlibc implementation
-
-	* mdk-stage1/network.h: configure_net_device is only used internally
-
-	* mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c: 
-	  - build glibc and dietlibc targets
-	  - bzero string buffer before sscanf call (dietlibc implementation)
-	  - verify returns of ioperm so that I can use it in test mode
-
-	* standalone/drakgw: full path for iptables
-
-	* mdk-stage1/probing.c: allow wait_message calls to be multi-lines
-	nicer layout for PCI detection messages
-	better modules handling interface (use of enum rather than guessing
-	single numbers..)
-
-2001/05/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po, share/po/ar.po: Updated Turkish file
-
-	* share/keyboards.tar.bz2: Added north-african keyboard
-
-	* keyboard.pm: added arabic azerty keyboard
-
-2001/05/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: fix messages to i18n extracting
-
-2001/05/14  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* fs.pm: s|mkxfs|mkfs.xfs|;
-
-2001/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: use new gethostby* interface
-
-	* mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data
-	which provides the busybox
-
-	* mdk-stage1/network.c: Have the wait_message() with the sleep()
-	  - complies to gethostby functions
-	  - add sleep(2) so that net intf is really up before operation
-	  - more logs
-	  - FTP: don't try to close control connection with data socket, erhm
-	:-(
-	  - debug netmask guessing, with stdio-frontend
-
-	* mdk-stage1/Makefile: i can compile slang and newt with dietlibc now
-	every targets build with dietlibc
-
-	* mdk-stage1/make_boot_img: use busybox for my debugging purpose
-
-	* mdk-stage1/tools.c: no need to poll() for data at beginning of
-	load_ramdisk_fd, it was a fix of another problem (bug with file stdio
-	operations with sockets in dietlibc)
-
-	* mdk-stage1/dietlibc/Makefile: build this new dietlibc
-	import new version of dietlibc
-
-	* mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions
-	provided by dietlibc
-
-	* mdk-stage1/url.c: use poll() rather than select(), smaller code size
-
-	* mdk-stage1/stage1.c: we don't use this sucking sash no more
-	we now use `busybox' compiled with the marvellous dietlibc, which
-	provides no less than 73 usefull binaries
-
-	* mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c,
-	mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c,
-	mdk-stage1/dietlibc/include/sys/ipc.h,
-	mdk-stage1/dietlibc/alpha/sendmsg.S,
-	mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c,
-	mdk-stage1/dietlibc/sparc/__testandset.S,
-	mdk-stage1/dietlibc/syscalls.s/open.S,
-	mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h,
-	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S,
-	mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h,
-	mdk-stage1/dietlibc/include/sys/syscall.h,
-	mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c,
-	mdk-stage1/dietlibc/syscalls.s/ptrace.s,
-	mdk-stage1/dietlibc/lib/isprint.c,
-	mdk-stage1/dietlibc/syscalls.s/dietstat.S,
-	mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c,
-	mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h,
-	mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c,
-	mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S,
-	mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c,
-	mdk-stage1/dietlibc/include/sys/sem.h,
-	mdk-stage1/dietlibc/syscalls.s/query_module.S,
-	mdk-stage1/dietlibc/lib/strchr.c,
-	mdk-stage1/dietlibc/syscalls.s/dietfstat64.S,
-	mdk-stage1/dietlibc/syscalls.s/lstat64.S,
-	mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c,
-	mdk-stage1/dietlibc/lib/perror.c,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c,
-	mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c,
-	mdk-stage1/dietlibc/include/utmp.h,
-	mdk-stage1/dietlibc/syscalls.s/sendfile.S,
-	mdk-stage1/dietlibc/syscalls.s/nice.S,
-	mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
-	mdk-stage1/dietlibc/syscalls.s/select.S,
-	mdk-stage1/dietlibc/include/sys/mtio.h,
-	mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S,
-	mdk-stage1/dietlibc/lib/__telldir.c,
-	mdk-stage1/dietlibc/i386/__testandset.S,
-	mdk-stage1/dietlibc/lib/remove.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S,
-	mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c,
-	mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c,
-	mdk-stage1/dietlibc/include/sys/un.h,
-	mdk-stage1/dietlibc/alpha/connect.S,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/lib/sigfillset.c,
-	mdk-stage1/dietlibc/lib/sigismember.c,
-	mdk-stage1/dietlibc/syscalls.s/dietstat64.S,
-	mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c,
-	mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c,
-	mdk-stage1/dietlibc/lib/tcsetpgrp.c,
-	mdk-stage1/dietlibc/sparc/Makefile.add,
-	mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S,
-	mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c,
-	mdk-stage1/dietlibc/include/inttypes.h,
-	mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S,
-	mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c,
-	mdk-stage1/dietlibc/alpha/recvmsg.S,
-	mdk-stage1/dietlibc/syscalls.s/fork.S,
-	mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c,
-	mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S,
-	mdk-stage1/dietlibc/include/features.h,
-	mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c,
-	mdk-stage1/dietlibc/syscalls.s/writev.S,
-	mdk-stage1/dietlibc/lib/fputs.c,
-	mdk-stage1/dietlibc/alpha/sigprocmask.S,
-	mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h,
-	mdk-stage1/dietlibc/syscalls.s/nanosleep.S,
-	mdk-stage1/dietlibc/syscalls.s/creat.S,
-	mdk-stage1/dietlibc/include/sys/sysinfo.h,
-	mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S,
-	mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c,
-	mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c,
-	mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S,
-	mdk-stage1/dietlibc/include/dirent.h,
-	mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c,
-	mdk-stage1/dietlibc/include/net/route.h,
-	mdk-stage1/dietlibc/syscalls.s/exit.S,
-	mdk-stage1/dietlibc/include/pthread.h,
-	mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S,
-	mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c,
-	mdk-stage1/dietlibc/lib/execvp.c,
-	mdk-stage1/dietlibc/syscalls.s/__reboot.S,
-	mdk-stage1/dietlibc/lib/stdin.c,
-	mdk-stage1/dietlibc/syscalls.s/getitimer.S,
-	mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c,
-	mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S,
-	mdk-stage1/dietlibc/sparc/fork.S,
-	mdk-stage1/dietlibc/syscalls.s/__pread.S,
-	mdk-stage1/dietlibc/include/sys/poll.h,
-	mdk-stage1/dietlibc/syscalls.s/personality.S,
-	mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h,
-	mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h,
-	mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c,
-	mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c,
-	mdk-stage1/dietlibc/include/sys/param.h,
-	mdk-stage1/dietlibc/syscalls.s/__getpagesize.S,
-	mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S,
-	mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c,
-	mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h,
-	mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S,
-	mdk-stage1/dietlibc/include/sys/kd.h,
-	mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_yield.S,
-	mdk-stage1/dietlibc/include/sys/mman.h,
-	mdk-stage1/dietlibc/lib/__readdir.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c,
-	mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c,
-	mdk-stage1/dietlibc/alpha/reml.S,
-	mdk-stage1/dietlibc/syscalls.s/fcntl.S,
-	mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c,
-	mdk-stage1/dietlibc/syscalls.s/ipc.S,
-	mdk-stage1/dietlibc/syscalls.s/mlockall.S,
-	mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c,
-	mdk-stage1/dietlibc/include/sys/msg.h,
-	mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
-	mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c,
-	mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c,
-	mdk-stage1/dietlibc/include/net/if_arp.h,
-	mdk-stage1/dietlibc/lib/execlp.c,
-	mdk-stage1/dietlibc/syscalls.s/stat64.S,
-	mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h,
-	mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c,
-	mdk-stage1/dietlibc/syscalls.s/fstat64.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_setparam.S,
-	mdk-stage1/dietlibc/include/sys/reboot.h,
-	mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c,
-	mdk-stage1/dietlibc/include/sys/sendfile.h,
-	mdk-stage1/dietlibc/include/sys/syslog.h,
-	mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_getparam.S,
-	mdk-stage1/dietlibc/lib/vsnprintf.c,
-	mdk-stage1/dietlibc/include/signal.h,
-	mdk-stage1/dietlibc/syscalls.s/pause.S,
-	mdk-stage1/dietlibc/include/arpa/inet.h,
-	mdk-stage1/dietlibc/include/sys/wait.h,
-	mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c,
-	mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c,
-	mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c,
-	mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c,
-	mdk-stage1/dietlibc/lib/__ltostr.c,
-	mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c,
-	mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S,
-	mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c,
-	mdk-stage1/dietlibc/lib/htons.c,
-	mdk-stage1/dietlibc/syscalls.s/sigaltstack.S,
-	mdk-stage1/dietlibc/include/sys/resource.h,
-	mdk-stage1/dietlibc/lib/__stat64_cvt.c,
-	mdk-stage1/dietlibc/lib/localtime.c,
-	mdk-stage1/dietlibc/alpha/seteuid.c,
-	mdk-stage1/dietlibc/syscalls.s/stime.S,
-	mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c,
-	mdk-stage1/dietlibc/ppc/Makefile.add,
-	mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c,
-	mdk-stage1/dietlibc/include/net/if.h,
-	mdk-stage1/dietlibc/include/shadow.h,
-	mdk-stage1/dietlibc/lib/__rewinddir.c,
-	mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c,
-	mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h,
-	mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c,
-	mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S,
-	mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c,
-	mdk-stage1/dietlibc/include/regex.h,
-	mdk-stage1/dietlibc/include/sys/ptrace.h,
-	mdk-stage1/dietlibc/lib/tcdrain.c,
-	mdk-stage1/dietlibc/syscalls.s/lstat.S,
-	mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c,
-	mdk-stage1/dietlibc/lib/random.c,
-	mdk-stage1/dietlibc/syscalls.s/times.S,
-	mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
-	mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S,
-	mdk-stage1/dietlibc/syscalls.s/dietlstat64.S,
-	mdk-stage1/dietlibc/ppc/__testandset.S,
-	mdk-stage1/dietlibc/include/mntent.h,
-	mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/dietlibc/syscalls.s/fstat.S,
-	mdk-stage1/dietlibc/syscalls.s/llseek.S,
-	mdk-stage1/dietlibc/lib/strsep.c,
-	mdk-stage1/dietlibc/include/sys/stat.h,
-	mdk-stage1/dietlibc/syscalls.s/munlockall.S,
-	mdk-stage1/dietlibc/syscalls.s/setpriority.S,
-	mdk-stage1/dietlibc/include/assert.h,
-	mdk-stage1/dietlibc/include/strings.h,
-	mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c,
-	mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c,
-	mdk-stage1/dietlibc/ppc/__longjmp.S,
-	mdk-stage1/dietlibc/lib/__closedir.c,
-	mdk-stage1/dietlibc/include/sys/signal.h,
-	mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c,
-	mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore,
-	mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h,
-	mdk-stage1/dietlibc/lib/tm_conv.c,
-	mdk-stage1/dietlibc/syscalls.s/reboot.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S,
-	mdk-stage1/dietlibc/syscalls.s/umount2.S,
-	mdk-stage1/dietlibc/syscalls.s/readv.S,
-	mdk-stage1/dietlibc/lib/__fxstat.c,
-	mdk-stage1/dietlibc/include/sys/select.h,
-	mdk-stage1/dietlibc/syscalls.s/syslog.S,
-	mdk-stage1/dietlibc/syscalls.s/sysinfo.S,
-	mdk-stage1/dietlibc/lib/fprintf.c,
-	mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README,
-	mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c,
-	mdk-stage1/dietlibc/syscalls.s/getcwd.S,
-	mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c,
-	mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S,
-	mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S,
-	mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S,
-	mdk-stage1/dietlibc/lib/__opendir.c,
-	mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c,
-	mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c,
-	mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c,
-	mdk-stage1/dietlibc/lib/__getcwd.c,
-	mdk-stage1/dietlibc/include/netinet/in.h,
-	mdk-stage1/dietlibc/lib/shmctl.c,
-	mdk-stage1/dietlibc/syscalls.s/dietlstat.S,
-	mdk-stage1/dietlibc/include/arpa/nameser.h,
-	mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c,
-	mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c,
-	mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S,
-	mdk-stage1/dietlibc/lib/stderr.c,
-	mdk-stage1/dietlibc/syscalls.s/close.S,
-	mdk-stage1/dietlibc/syscalls.s/dietfstat.S,
-	mdk-stage1/dietlibc/include/locale.h,
-	mdk-stage1/dietlibc/syscalls.s/getpriority.S,
-	mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c,
-	mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c,
-	mdk-stage1/dietlibc/include/sys/mount.h,
-	mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S,
-	mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h,
-	mdk-stage1/dietlibc/lib/islower.c,
-	mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c,
-	mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c,
-	mdk-stage1/dietlibc/include/ctype.h,
-	mdk-stage1/dietlibc/include/netdb.h,
-	mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c,
-	mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c,
-	mdk-stage1/dietlibc/syscalls.s/waitpid.S,
-	mdk-stage1/dietlibc/lib/strtoul.c,
-	mdk-stage1/dietlibc/syscalls.s/stat.S,
-	mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc
-
-	* mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers
-
-	* mdk-stage1/dietlibc/include/stdio.h,
-	mdk-stage1/dietlibc/include/stdlib.h,
-	mdk-stage1/dietlibc/include/math.h,
-	mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile
-	with dietlibc
-	import new version of dietlibc
-
-	* mdk-stage1/Makefile.common: new dietlibc binaries location
-
-	* mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc
-	now
-
-	* mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc
-
-	* mdk-stage1/dhcp.c: Have the wait_message() with the sleep()
-	  - add a sleep(2) after ioctl ifupping so that further operation can
-	work normally
-	  - more logs
-
-2001/05/14  kjx
-
-	* share/po/zh_CN.GB2312.po: process untranslated
-
-2001/05/14  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling
-
-2001/05/11  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed missing package which may be selected on
-	hardware during real install.
-
-	* rescue/tree/etc/oem: added support to change boot entries when invoking
-	oem script.
-	fixed missing SCSI support and driver module loading.
-	fixed missing speficic packages not installed on HW detected.
-
-2001/05/08  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: VBox -> HBox in Embedded mode
-
-	* standalone/mousedrake: code cleaned and debugged
-	added mouse test. Ugly
-
-2001/05/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: fix minor stuff
-	re-include correct layout for [] choices, in a smaller way than before
-
-	* mdk-stage1/tools.c: minor fix
-	needs to poll() for available data before loading ramdisk because ftp
-	transfers would fail in some situations
-
-	* mdk-stage1/init.c: new maxim
-
-	* mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star
-	is printed when last blocks of file are read
-
-	* mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS:
-	----------------------------------------------------------------------
-
-2001/05/08  siegel
-
-	* share/po/de.po: fixed plenty ugly typos
-
-2001/05/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po: updated Brazilian file
-
-2001/05/07  yduret
-
-	* docs/README.devel: fix one typo
-
-	* any.pm, bootloader.pm: updated install_lilo() according to new lilo
-	package
-	(/boot/lilo-{menu,graphic,text})
-
-2001/05/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad output and bad adsl script
-
-2001/05/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install2.pm: workaround for msec hang on PPC
-
-2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC,
-	don't run xmodmap, PPC SMP routine placeholder
-
-2001/05/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/04/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: nicer layout for progressbar and
-	statusreport, when update_progression
-	Provide some description of the drivers
-
-	* docs/HACKING: fix
-	pserver -> ext
-
-	* mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h,
-	mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h,
-	mdk-stage1/modules.c: Provide some description of the drivers
-
-2001/04/30  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/
-
-	* docs/advocacy: fuck'em all
-
-2001/04/26  François Pons  <fpons@mandrakesoft.com>
-
-	* docs/README.devel, docs/README: added some more comments for DrakX code
-	source and usage.
-
-2001/04/25  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed use of VERSION file to find language.
-	prepare a oem disk to be used by moving all files that will not be
-	installed by oem (oem-master disk preparation).
-
-	* rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed
-	usage of free space on disk, added NVIDIA packages to install.
-
-	* rescue/tree/etc/oem-server: added missing VERSION file.
-	fixed usage of free space on disk, added NVIDIA packages to install.
-
-	* rescue/tree/etc/oem: added missing autologin package.
-	added option to enable oem mode.
-	added missing VERSION file.
-	fixed usage of free space on disk, added NVIDIA packages to install.
-
-2001/04/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version is labelled "cooker"
-
-2001/04/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c:
-	integrate fg's fixes for includes
-
-2001/04/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha,
-	rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc
-
-2001/04/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: fix bug that trashes the network config of stage1
-	during stage2, when no DNS is provided
-
-2001/04/18  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: last corrections
-
-	* standalone/draknet, netconnect.pm: last corrections
-	corrected internet connection test, and parameters editing
-
-	* install_steps_gtk.pm: corrected cursor on details
-
-2001/04/18  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE
-	* drakprofile in level 1
-	* swapped tkinter and python-devel
-	* vnc-server in NETWORKING_REMOTE_ACCESS_SERVER
-	* vnc-SVGALIB in level 2
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed embedded
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: restored grub as everything seems fine.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-
-	* install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV
-
-2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* standalone/draknet: fixed typo
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Basque file
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  warly
-
-	* share/rpmsrate: put MAKEDEV at end of line
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed embedded
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: restored grub as everything seems fine.
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-	* install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Basque file
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): set NIS to broadcast
-	when NIS asked. Empty NIS still means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* any.pm: removed Grub if Embedded
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: minor bug.
-
-	* any.pm: removed Grub if Embedded
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: updated
-	updated
-
-	* network.pm: dhcpd -> dhcpcd
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* netconnect.pm: minor bug.
-	dhcpd -> dhcpcd
-
-	* standalone/draknet: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-2001/04/16  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added missing rio500 in closure.
-	finally fixed menu by generating /etc/rpm/macros file.
-	added missing LF.
-	now fixed menu problems.
-	try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of
-	fr:fr_FR.
-	really disable server.
-	maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* fs.pm: restored not neccessary to load reiserfs for formating.
-	loading reiserfs module before formatting.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-	* mdk-stage1/TECH-INFOS: update doc
-
-	* share/po/fr.po: fix minor thing
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* standalone/net_monitor: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-2001/04/16  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
-	"fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: bugfix
-	added update thread
-	corrected bad install package.
-	updated expert mode
-
-	* network.pm, install_steps.pm: corrected bad install package.
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* tinyfirewall.pm: corrected package installation
-
-	* standalone/net_monitor: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-	* netconnect.pm: debug
-	corrected bad install package.
-
-2001/04/16  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
-	"fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-	* install_any.pm (g_auto_install): do not take 'mkbootdisk'
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/15  fabman
-
-	* share/po/es.po: updates
-
-2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix minor typo
-
-2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/gl.po: updated Galician file
-
-2001/04/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
-	Workstation, Server) to make gg happy
-
-2001/04/15  fabman
-
-	* share/po/es.po: updates
-
-2001/04/15  fcrozat
-
-	* share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories
-
-2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix minor typo
-
-2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files
-
-2001/04/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
-	Workstation, Server) to make gg happy
-
-	* printerdrake.pm (main): restore the "Ok" button for the queues
-	manipulation
-
-	* any.pm (write_passwd_user): fix use of local
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): add an eval
-	around "require log" to keep perl from going totally mad (getting things
-	like v18.843.482 required--this is only v5.6.0)
-
-2001/04/15  yduret
-
-	* bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to
-	mcc normally
-	fix layout & size
-
-2001/04/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected isdn detect display
-
-	* standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7
-
-2001/04/14  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
-	selection of packages.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): add apache
-
-	* install_gtk.pm (createXconf): ensure the mouse device is created (mainly
-	for auto_inst)
-
-	* install_steps_interactive.pm (exitInstall): fix bad i18n of Replay
-	button (thx2submarine)
-
-2001/04/14  warly
-
-	* share/rpmsrate: lower viavoicemenu to 1 to avoid error message for
-	powerpack boxes without ViaVoice
-
-2001/04/14  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
-	selection of packages.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code
-
-2001/04/14  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to gzip synthesis file.
-	safe guard generation of synthesis file.
-	fixed umask on urpmi list file and generate synthesis file for each
-	hdlist.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
-	/mnt/etc/gtk) instead of /etc/gtkrc
-
-	* any.pm (autologin): spurious messages of chksession  -> dave nul
-
-	* interactive_newt.pm (exit): fix the exit code
-	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
-	them exist...)
-	(waitbox): remove spurious '0' in wait_messages
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14  warly
-
-	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
-	and list
-
-2001/04/14  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to gzip synthesis file.
-	safe guard generation of synthesis file.
-	fixed umask on urpmi list file and generate synthesis file for each
-	hdlist.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
-	/mnt/etc/gtk) instead of /etc/gtkrc
-
-	* any.pm (autologin): spurious messages of chksession  -> dave nul
-
-	* interactive_newt.pm (exit): fix the exit code
-	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
-	them exist...)
-	(waitbox): remove spurious '0' in wait_messages
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse
-	setup for PPC
-
-2001/04/14  warly
-
-	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
-	and list
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
-	opened).
-
-2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: Updated Norwegian file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated po files
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): reverse message
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
-	ru(winkeys), it is redondant
-
-	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
-	* any.pm (ask_users): do not have an empty icon. better not ask for icon
-	if no icon
-
-2001/04/13  siegel
-
-	* share/po/de.po: updates
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
-	opened).
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): reverse message
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
-	ru(winkeys), it is redondant
-
-	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
-	* any.pm (ask_users): do not have an empty icon. better not ask for icon
-	if no icon
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* standalone/draknet: message corrected
-	updated
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* bootlook.pm: embedded = 0 -> local
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-	add DATABASES to Database
-	add icons for server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* network.pm: updated wireless configuration
-
-	* netconnect.pm: corrected loop in isdn + other things
-
-	* bootlook.pm: embedded = 0 -> local
-
-	* standalone/draknet: updated
-	added delete event
-
-2001/04/13  François Pons  <fpons@mandrakesoft.com>
-
-	* netconnect.pm: fixed syntax error :-)
-
-	* install_steps.pm, install_steps_gtk.pm: added conditional update-menus
-	if package are installed.
-
-	* install_steps_interactive.pm: added conditional update-menus if package
-	are installed.
-	make sure update-menus is called after installing cups related packages.
-
-2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated
-	Croatian and Swedish files
-
-	* share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po,
-	share/po/is.po, share/po/cs.po: Removed po files with too low leve lof
-	translating ( < 60% )
-	so they are not included on final CD
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* bootlook.pm: don't use Locale::GetText, use DrakX's i18n
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* my_gtk.pm (new): make dams happy
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add DATABASES to Database
-	add icons for server
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: remove unnecessary redhat history code
-
-2001/04/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed wrong kernel version extraction (typically for
-	upgrade).
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* interactive.pm: removed strict die on empty list.
-
-	* live_install2: added some gtk and gdk_imlib missing variables.
-
-	* live_install: removed gtk variable for data, moved to second script.
-
-	* modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: remove unneeded #define
-
-	* standalone/drakgw: add some rule so later on tinyfirewall will not
-	prevent everything from working
-
-	* share/po/fr.po: minor fix
-	write some ppc translations
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Updated Italian file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm: use run_program and remove "require run_program"s
-
-	* my_gtk.pm (main): only accept X (gdk) events key_press, key_release and
-	exposure (so
-	that not to receive motion_notify which would generate focus_out in
-	non-interesting cases)
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): fix the test
-	for empty lists
-	(ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: if neuneu but explicited clicked, don't skip
-	corrected pcmcia driver
-
-2001/04/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* common.pm: improved bestMatchSentence2.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* interactive.pm: removed strict die on empty list.
-
-	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: add some rule so later on tinyfirewall will not
-	prevent everything from working
-
-	* share/po/fr.po: write some ppc translations
-	un-dadouize a problem
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Updated Italian file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix no advertising with less
-	than 20MB of packages
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* install_steps_interactive.pm (configureX): fix for X test at install
-	with exotic fonts
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected typo
-	added use bootloader
-
-	* standalone/net_monitor: typo
-
-	* netconnect.pm: if neuneu but explicited clicked, don't skip
-	corrected pcmcia driver
-	corrected typo
-
-	* lang.pm: pixel sux
-
-	* network.pm, standalone/draknet: corrected network connection
-
-	* my_gtk.pm: corrected set_modal
-
-2001/04/12  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* common.pm: improved bestMatchSentence2.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: un-dadouize a problem
-	sync
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po,
-	share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po,
-	share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
-	share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po,
-	share/po/id.po: Updated Chinese file
-
-	* share/po/it.po: Updated Italian file
-	Updated Chinese file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix no advertising with less
-	than 20MB of packages
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* install_steps_interactive.pm (configureX): fix for X test at install
-	with exotic fonts
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  siegel
-
-	* share/po/de.po: new german version
-
-2001/04/12  yduret
-
-	* bootlook.pm: added some stuff
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected typo
-	added use bootloader
-
-	* netconnect.pm: corrected typo
-
-2001/04/12  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/12  siegel
-
-	* share/po/de.po: new german version
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: tooltips
-
-	* netconnect.pm: updated
-
-	* my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): relook
-
-	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
-	big
-
-	* share/compssUsers: adapt for new profile choosing layout
-
-2001/04/11  yduret
-
-	* bootlook.pm: bug fix in autologin
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: tooltips
-
-	* bootlook.pm: updated
-	corrected
-
-	* tinyfirewall.pm: installation of package : not at the same place
-
-	* netconnect.pm: updated
-	added driver for pcmcia, corrected eth conf for pppoe
-
-2001/04/11  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added missing LD_LOADER for calling rpm.
-
-	* printerdrake.pm: fixed probe on kernel 2.4.
-	make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on
-	upgrade.
-
-	* detect_devices.pm: avoid need of shell for live upgrade on serial_probe
-	(removed 2>/dev/null which
-	is not necessary).
-	fixed printer probe (usb and parallel).
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* lang.pm: added missing LD_LOADER reference and remove old code
-	commented.
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzyize
-	sync with new msg in services.pm and compssUsers
-	sync with pablo update
-	fixes of translations
-	write the shitload of untranslated and fuzzy msg
-
-	* standalone/tinyfirewall: i18n title
-
-	* services.pm: have many more services tooltipped from here so we can get
-	translations afterwards
-
-	* share/compssUsers: fix typos of rpmsrate groups
-
-	* standalone/drakgw: kosmetik
-	do i18n for title also
-
-2001/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: Added reference to netscape-chinese_big5 file
-
-	* share/po/DrakX.pot, share/po/wa.po: Updated Walloon file
-	Updated po files
-	Updated Slovak, Walloon and Polish files
-
-	* share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po,
-	share/po/ca.po, share/po/cs.po: Updated po files
-	Updated Slovak, Walloon and Polish files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po,
-	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po,
-	share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/af.po: Updated po files
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* share/compssUsers: adapt for new profile choosing layout
-
-	* Makefile: take cardmgr-*
-
-	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
-	big
-	translate the ``path'' in profile selection
-
-	* share/po/i18n_compssUsers: relooking
-
-	* any.pm (setupBootloader): translate the bootloaders to use
-	(setupBootloader): nicer look&feel
-
-	* install_any.pm (fsck_option): add a closing ``"'' so that strings to
-	i18n extraction works
-	(fsck_option): add a closing ``"'' so that strings to i18n extraction
-	works
-	(check_prog): make it work
-
-	* install_steps_gtk.pm (reallyChooseGroups): relook
-	(installPackages): pressing "Details" gives you more detailed info
-	(reallyChooseGroups): start relooking
-	(installPackages): don't display advertising if less 20MB of packages
-	translate the ``path'' in profile selection
-
-2001/04/11  warly
-
-	* share/compssUsers: Add descr for servers
-
-2001/04/11  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* services.pm: have many more services tooltipped from here so we can get
-	translations afterwards
-
-	* share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-	* share/compssUsers: fix typos of rpmsrate groups
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-
-	* diskdrake.pm (More): fix exception relaunching
-
-	* install_any.pm (check_prog): make it work
-
-	* any.pm (setupBootloader): nicer look&feel
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* Makefile: take cardmgr-*
-
-2001/04/11  fabman
-
-	* share/po/es.po: updated spanish .po file
-
-2001/04/11  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
-	  - completly remove po's (will be getFile'd)
-	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* share/aliases: add rmmod -> insmod_
-
-	* lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-	* Makefile: take cardmgr-*
-
-	* install_any.pm (check_prog): make it work
-	(check_prog): if a prog isn't available, try to fetch it via getFile
-	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
-	stage2
-	to allow a getAndSaveFile.
-	(getAndSaveFile): if only one arg is given, assume the name is the same
-
-	* standalone/XFdrake: fix bug for running xfs
-
-	* any.pm (setupBootloader): nicer look&feel
-
-	* diskdrake.pm (More): fix exception relaunching
-	check resize_reiserfs is there or get it
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-	in install, call install_any::check_prog to allow shadow progs which are
-	fetched when needed via getFile
-
-	* share/list: remove rmmod (is now a symlink)
-
-2001/04/11  siegel
-
-	* share/po/de.po: updated german version
-
-2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: Updated Catalan file
-
-2001/04/10  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: 
-	  - fix wiz_*.png removing
-	  - fix copying cardmgr* which included cardmgr.o
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
-	  - completly remove po's (will be getFile'd)
-	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
-	* standalone/XFdrake: fix bug for running xfs
-
-	* diskdrake.pm: check resize_reiserfs is there or get it
-
-	* share/aliases: add rmmod -> insmod_
-
-	* install_any.pm (check_prog): if a prog isn't available, try to fetch it
-	via getFile
-	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
-	stage2
-	to allow a getAndSaveFile.
-	(getAndSaveFile): if only one arg is given, assume the name is the same
-
-	* share/list: remove rmmod (is now a symlink)
-
-	* run_program.pm: in install, call install_any::check_prog to allow shadow
-	progs which are
-	fetched when needed via getFile
-
-	* lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-2001/04/10  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad network restart
-
-	* my_gtk.pm: corrected bad font
-
-	* network.pm: get rid of ifcfg-
-	minor correction
-
-2001/04/10  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed selection of CDs.
-
-	* devices.pm: added input/event class of devices (necessary for usb wacom
-	at install)
-
-2001/04/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
-	mdk-stage1/mkinitrd_helper/Makefile: 
-	  - honour quiet mode at boot time
-	  - fake modprobe to shut up kmod
-
-	* bootlook.pm: do not use french in i18n'ed msg yvounet!!
-
-	* standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth
-	interoperation with bastille-firewall
-
-2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: Updated Czech file
-	Updated po files
-
-	* share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated
-	Indonesian, Japanese, Korean and Vietnamese files
-	Updated po files
-
-	* share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing
-	translatable string
-	Updated po files
-
-	* share/po/ca.po: Updated Catalan file
-	Updated po files
-
-	* share/locales.tar.bz2: Added missing file for Vietnamese
-
-	* share/po/bg.po: Updated Bulgarian file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po,
-	share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files
-
-2001/04/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq
-	'')
-	(create_boxradio): handle double_click
-	(ask_from_entries_refW): use radio boxes instead of list/clist if small
-	number
-	of choices
-	(create_ctree): handle single click on node opens the node
-
-	* my_gtk.pm: create and use gtkset_tip
-	(_create_window): XSetInputFocus done only on expose_event of the
-	topmost window
-	(new): ensure only one modal
-
-	* Xconfigurator.pm (main): have an "Ok" button to leave
-
-	* install_steps_gtk.pm: use gtkset_tip
-	(choosePackagesTree): fix "Show automatically selected packages"
-	create and use gtkset_tip
-
-	* Makefile: 
-	  - fix wiz_*.png removing
-	  - fix copying cardmgr* which included cardmgr.o
-
-2001/04/10  warly
-
-	* share/rpmsrate: add viavoicemenu_{us,gr,fe}
-
-2001/04/10  yduret
-
-	* bootlook.pm: grub/lilo mode
-
-2001/04/10  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad network restart
-
-	* my_gtk.pm: corrected bad font
-
-	* network.pm: get rid of ifcfg-
-	minor correction
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: typo
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
-	size as the check is done before rounding.
-
-	* bootloader.pm (install_grub): altconfigfile only if /boot is not
-	reiserfs :-/
-
-	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
-	modules.cz)
-
-	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
-	based on pciusbtable
-
-	* share/compssUsers, share/rpmsrate: 
-	  - SOUND is now a flag
-	  - AUDIO is the group
-
-2001/04/09  siegel
-
-	* tinyfirewall.pm: i18n fixes
-
-2001/04/09  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixes of grub installation using hd.img
-	fix the fix for loopback mounting of hd.img.
-
-	* Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth.
-
-	* pkgs.pm: changed transaction error management this way: if a transaction
-	fails, DrakX
-	tries to make as many transaction as there are package that have failed
-	to be
-	installed (this means one transaction of only one package). This help
-	installing
-	most package that are correct (as a transaction that failed cause all
-	remaining
-	package to be not installed).
-
-2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: 8.0rc -> 8.0
-
-	* rescue/tree/etc/oem: fix english thanks to Kevin
-
-	* standalone/drakgw: do not die when an initscript returns non-0
-	(initscripts too buggy)
-
-2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Danish file
-
-	* any.pm: changed  ISO_8859-1 TO ISO-8859-1
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
-	use it for kdm message
-
-	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
-	size as the check is done before rounding.
-
-	* bootloader.pm (install_grub): altconfigfile only if /boot is not
-	reiserfs :-/
-
-	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
-	modules.cz)
-
-	* install2.pm (main): sets umask (seems like default one is no more 022,
-	kernel change?)
-
-	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
-	(especially for abnt2 (br))
-
-	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
-	based on pciusbtable
-
-	* share/compssUsers, share/rpmsrate: 
-	  - SOUND is now a flag
-	  - AUDIO is the group
-
-	* lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09  siegel
-
-	* share/po/de.po: fixes
-
-	* Xconfigurator.pm: fixed i18n bug
-
-2001/04/09  yduret
-
-	* standalone/tinyfirewall: button policy (thx gc)
-
-	* standalone/drakgw: deyvounification : remove some un-useful comments in
-	code
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected
-
-	* standalone.pm: install function now returns the return value of the
-	system.
-
-	* netconnect.pm: corrected buggy cable
-	removed buggy modem screen repetition
-
-2001/04/09  François Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
-	applied).
-	fixed cancel support.
-	added conditional restart of gpm on mouse configuration change.
-
-	* fs.pm: removed notail option for reiserfs.
-
-	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
-	DrakConf only).
-
-	* install_any.pm: added missing package to copy.
-
-	* rescue/tree/etc/oem: fixes of grub installation using hd.img
-	fix the fix for loopback mounting of hd.img.
-	fixed hd.img access right.
-	make kernel22 installed for every oem install...
-	moved some package to closure instead of installed.
-	added some missing packages.
-	added nolock option for nfsmount.
-	added missing package to copy.
-
-2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton
-
-	* mdk-stage1/Makefile: 8.0beta -> 8.0rc
-
-	* standalone/drakgw: fix for when there is an already existing rc.firewall
-	complies with old format of drakgw so that upgrades will work
-
-	* rescue/tree/etc/oem: fix english thanks to Kevin
-
-2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* any.pm: changed  ISO_8859-1 TO ISO-8859-1
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
-	use it for kdm message
-
-	* interactive.pm (ask_from_treelistf): make it behaves correctly when
-	"cancel" is clicked
-
-	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
-	(especially for abnt2 (br))
-
-	* install2.pm (main): sets umask (seems like default one is no more 022,
-	kernel change?)
-	(main): log the umask
-
-	* devices.pm (entry): add hd[ijkl]*
-
-	* bootloader.pm (install_lilo): better handling of map-drive (there's not
-	always only 2 disks!)
-
-	* lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09  siegel
-
-	* share/po/de.po: fixes
-
-2001/04/09  yduret
-
-	* standalone/drakboot: added lilo/grub
-
-	* bootlook.pm: added lilo/grub mode
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: removed use install_any
-
-	* tinyfirewall.pm: corrected
-
-	* netconnect.pm: corrected buggy cable
-	removed buggy modem screen repetition
-	corrected bad bug when creating new profile
-
-	* standalone.pm: install function now returns the return value of the
-	system.
-
-	* Makefile: removed install_any
-
-2001/04/09  François Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
-	applied).
-	fixed cancel support.
-	added conditional restart of gpm on mouse configuration change.
-
-	* rescue/tree/etc/oem: fixed hd.img access right.
-	make kernel22 installed for every oem install...
-	moved some package to closure instead of installed.
-	added some missing packages.
-	added nolock option for nfsmount.
-	added missing package to copy.
-
-	* fs.pm: removed notail option for reiserfs.
-
-	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
-	DrakConf only).
-
-	* printer.pm: added Till patch for printer (raw queue and PostScript
-	queue).
-
-	* install_any.pm: added missing package to copy.
-
-2001/04/09  kjx
-
-	* share/po/zh_CN.GB2312.po: translate before 8.0 release
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): log the umask
-
-	* interactive.pm (ask_from_treelistf): make it behaves correctly when
-	"cancel" is clicked
-
-	* devices.pm (entry): add hd[ijkl]*
-
-	* bootloader.pm (install_lilo): better handling of map-drive (there's not
-	always only 2 disks!)
-
-2001/04/09  yduret
-
-	* bootlook.pm: fix, added lilo/grub frame
-	fixed till bug
-
-2001/04/08  dam's  <damien@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get
-	rid of kisdn
-
-	* tinyfirewall.pm: updated
-	added package installation
-
-	* netconnect.pm: get rid of kisdn
-	updated
-	no more askwarn in wizard mode
-	updated
-
-	* standalone/tinyfirewall, standalone/drakgw, my_gtk.pm,
-	netconnect_consts.pm: updated
-
-	* standalone/net_monitor: removed Data::Dumper
-	typo
-
-	* standalone/draknet: updated
-	typo
-	corrected bad isdn field
-
-2001/04/08  daouda
-
-	* share/rpmsrate: increase quanta weight .
-
-2001/04/08  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: correct my mistakes on removing some modules from stage1 and
-	stage2 (-> remove only from stage1)
-
-2001/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/compssUsers.desktop, standalone/draknet: Fixed some english typos
-
-	* standalone/net_monitor, netconnect.pm: Some English changes
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Fixed some english typos
-	Updated pot file and various po files
-
-2001/04/08  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (write): remove debugging info :-(
-
-	* bootloader.pm (suggest): add option "quiet" to the kernel in fb
-	(requested by chmou)
-
-	* install_steps.pm (afterInstallPackages): remove setting of kde charset
-	in kdeglobals (kde is a grown-up now)
-
-2001/04/08  siegel
-
-	* share/po/de.po: new german version
-	updates
-
-2001/04/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo
-	typo
-	net_monitor incorporation
-
-	* standalone/net_monitor, Makefile.config: net_monitor incorporation
-
-2001/04/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po: updated Croatian files
-
-	* share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot,
-	share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and
-	Walloon files
-
-2001/04/07  warly
-
-	* share/compssUsers: PCL-CVS release v2_9_9
-	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
-	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
-	In directory .:
-	              Modified                compssUsers
-	In directory po:
-	patched       Up-To-Date              po/DrakX.pot
-	patched       Up-To-Date              po/ca.po
-	patched       Up-To-Date              po/de.po
-	patched       Up-To-Date              po/hr.po
-	patched       Up-To-Date              po/id.po
-	patched       Up-To-Date              po/it.po
-	patched       Up-To-Date              po/ja.po
-	patched       Up-To-Date              po/ko.po
-	patched       Up-To-Date              po/sp.po
-	patched       Up-To-Date              po/sr.po
-	patched       Up-To-Date              po/vi.po
-	patched       Up-To-Date              po/wa.po
-	
-	  --------------------- End ---------------------
-	  -- last cmd: cvs -f update -d -P --
-
-	* share/rpmsrate: PCL-CVS release v2_9_9
-	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
-	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
-	In directory .:
-	              Modified                rpmsrate
-	
-	  --------------------- End ---------------------
-	  -- last cmd: cvs -f update -d -P --
-
-2001/04/06  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-
-2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: use jeff's suggestions to remove some old stuff
-	Sun Happy Meal only for Sparc
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-	
-	  - do not print warning when we are in AUTOMATIC and insmod failed
-	because of file-not-found in mar file (raid cards, etc)
-	  - print "please include msg from Alt-F3" for this warning message to
-	ease further support
-	  - print pci entry of cards found in te logs
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
-	mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files
-
-	* share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files
-
-2001/04/06  siegel
-
-	* share/po/de.po: updates
-
-2001/04/06  yduret
-
-	* standalone/drakgw: swap cancel/configure button
-
-2001/04/06  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: dead code
-
-	* standalone/net_monitor: updated
-
-	* netconnect.pm: be quiet
-
-2001/04/06  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-	fixed if label does not exists and grub refuse to read.
-
-	* install_steps_interactive.pm: fixed typo for cups checking of
-	installation.
-	fixed "No printer" after configuring cups for remove server.
-	added log for CD medium chosen par user.
-
-	* pkgs.pm: added killing on child process of transaction that have been
-	detached (typically
-	with pid > transaction_pid and parent is 1).
-
-2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - correct yvounetification in i18n stuff
-	  - remove some remaining debugging printings
-	  - add a bit more of explanations when starting drakgw in wizard mode
-
-	* modules.pm: re integrate some TR net cards
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-	
-	  - do not print warning when we are in AUTOMATIC and insmod failed
-	because of file-not-found in mar file (raid cards, etc)
-	  - print "please include msg from Alt-F3" for this warning message to
-	ease further support
-	  - print pci entry of cards found in te logs
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Thai file
-	Updated pot file
-
-2001/04/06  yduret
-
-	* standalone/drakgw: swap cancel/configure button
-
-2001/04/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: addde tk like routines
-
-	* netconnect.pm: be quiet
-	correctedInternetAccessTye and ADSLType
-
-	* Makefile: iCorrected missing file install_any.pm. pixel sux.
-
-	* standalone/draknet2: dead code
-
-	* standalone/net_monitor: updated
-	updated
-	updated
-	updated
-	updated
-	added
-
-	* pixmaps/net_d.png, pixmaps/net_c.png: added
-
-	* share/logo-mandrake.png: new icon
-
-2001/04/06  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed if label does not exists and grub refuse to
-	read.
-
-	* install_steps_interactive.pm: fixed typo for cups checking of
-	installation.
-	fixed "No printer" after configuring cups for remove server.
-	added log for CD medium chosen par user.
-
-	* pkgs.pm: added killing on child process of transaction that have been
-	detached (typically
-	with pid > transaction_pid and parent is 1).
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Thai file
-	Updated pot file
-
-2001/04/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
-	every modules.cz except the
-	biggest one
-
-	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
-	and use it
-
-	* install_any.pm: add write_fstab
-	create install_any::write_fstab and use it
-
-2001/04/06  yduret
-
-	* bootlook.pm: minor fix
-
-	* standalone/drakgw: recoded a embedded && gtk mode
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (fs_options): created (gets codepage and iocharset)
-
-	* common.pm (if_): better logging of the error
-
-2001/04/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
-	every modules.cz except the
-	biggest one
-
-	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
-	and use it
-
-	* install_any.pm: add write_fstab
-	create install_any::write_fstab and use it
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakboot: 
-	  - fix getting result of fsedit::hds
-	  - cleanup
-
-	* lang.pm (fs_options): created (gets codepage and iocharset)
-
-	* common.pm (if_): better logging of the error
-	(getVarsFromSh): fix for AA="" inspired by chmou the Great (but the
-	Great
-	what?)
-
-	* bootloader.pm (install_grub): small fix
-	(install_lilo): fix lilo's dumbness (when lilo warns about not the first
-	drive, it usually fails)
-
-	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-	* install_steps_interactive.pm (addUser): default autologin to first user
-	in beginner
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (autologin): fix
-	ask for autologin
-
-	* install_steps_interactive.pm: ask for autologin
-	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
-	was used. Better have a look at /proc/cmdline
-
-	* bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about
-	not the first drive, it usually fails)
-
-	* pkgs.pm, share/rpmsrate: 
-	  - s/PCI/HW/
-	  - add rio500
-
-	* install_any.pm (kernelVersion): fix enormous stupid typo
-
-	* common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great
-	(but the Great
-	what?)
-
-	* install_steps.pm (exitInstall): oups, report_bug is no more in
-	commands::
-
-	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
-	automatically selected
-	packages' to go along with the new description
-
-	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
-	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
-	* install_any.pm (kernelVersion): fix enormous stupid typo
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* install_steps.pm (exitInstall): oups, report_bug is no more in
-	commands::
-	(configureXBefore): fix the xkb verification (was broken for things like
-	``de(nodeadkeys)'')
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* any.pm: ask for autologin
-
-	* fs.pm (format_reiserfs): quietly format reiserfs
-
-	* commands.pm: 
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* install_steps_interactive.pm: ask for autologin
-	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
-	was used. Better have a look at /proc/cmdline
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* share/rpmsrate: 
-	  - add ldetect
-	  - the default Aurora chose is the categorizing one
-
-2001/04/05  siegel
-
-	* share/po/de.po: fixed typo
-
-2001/04/05  yduret
-
-	* bootlook.pm: fix pablo mess
-	install autolgin just if we want to autolog :)
-
-2001/04/05  dam's  <damien@mandrakesoft.com>
-
-	* ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure
-	vs msec.
-
-	* my_gtk.pm: added gtksize
-
-2001/04/05  fcrozat
-
-	* share/rpmsrate: No longer propose nautilus-mozilla (required by
-	nautilus)
-	propose nautilus-trilobite (for Eazel services)
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
-	automatically selected
-	packages' to go along with the new description
-
-	* commands.pm, install_steps_interactive.pm, install_any.pm: 
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* fs.pm (format_reiserfs): quietly format reiserfs
-
-	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
-	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
-	* share/rpmsrate: 
-	  - add ldetect
-	  - the default Aurora chose is the categorizing one
-
-	* install_steps.pm (configureXBefore): fix the xkb verification (was
-	broken for things like ``de(nodeadkeys)'')
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-2001/04/05  siegel
-
-	* share/po/de.po: fixed typo
-
-2001/04/05  yduret
-
-	* bootlook.pm: fix pablo mess
-	install autolgin just if we want to autolog :)
-
-2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make sure to insmod parport_probe alone as it is not
-	available in 2.4 kernel and
-	this this not a problem (silent error).
-	added complete callback to check queue name under cups does contains
-	only letters, numerics or underscore.
-
-	* install_steps_interactive.pm: fixed printer description in summary.
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure
-	to remove 32 bits depth
-	for such card.
-
-	* detect_devices.pm: fixed parport probe for printer under 2.4 kernel.
-
-	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
-	some times.
-
-	* printer.pm: added die on error of lpadmin.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (tv): add ultracam & usbvideo
-	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
-	skip them
-	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
-	skip them
-
-	* install_any.pm (kernelVersion): cleanup
-
-2001/04/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm: kernelVersion mods for PPC
-
-2001/04/04  daouda
-
-	* share/rpmsrate: add gatos for ati tv card .
-
-2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04  François Pons  <fpons@mandrakesoft.com>
-
-	* live_install: unset locale environment for safety
-
-	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
-	(needed for live upgrade so
-	that error message are not printed)
-
-	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
-	some times.
-
-	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
-	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): better handling for tv, photo and scanner
-
-	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
-	stage1, so skip them
-	  - add photo, tv and scanner
-	  - add pegasus and kaweth modules
-
-2001/04/04  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo
-
-2001/04/04  daouda
-
-	* share/rpmsrate: add gatos for ati tv card .
-	reput klyx but in lower weight (2)
-	removed klyx from rpmsrate (bad idea according to pixel )
-	add klyx in install "Office KDE"
-
-2001/04/04  François Pons  <fpons@mandrakesoft.com>
-
-	* live_install: unset locale environment for safety
-
-	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
-	(needed for live upgrade so
-	that error message are not printed)
-
-	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
-	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* install_steps.pm: disable frame buffer for Matrox cards.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): better handling for tv, photo and scanner
-
-	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
-	stage1, so skip them
-	  - add photo, tv and scanner
-	  - add pegasus and kaweth modules
-
-	* share/compssUsers: remove TV (it is a hardware flag)
-
-2001/04/03  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: keep mount point configuration trhough multi-passes of
-	diskdrake and others.
-
-	* Xconfigurator.pm: prefer XF3 for SiS card.
-
-2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file
-
-2001/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: do not use isSpecial which should only be used on
-	partitions
-	(main): do not have loopback pseudo hd in hds out of diskdrake
-
-	* modules.pm (load_raw): add the require install_any
-
-	* share/rpmsrate: restore Aurora (i really don't understand what i've done
-	with flag AURORA a month ago) to a simple behaviour
-
-	* install_steps_interactive.pm (choosePackages): do not make a special
-	case for upgrades (was: select the
-	min size, which was on contradiction with profile selection)
-
-	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
-	* standalone/mousedrake: fix horrible error (using an undefined $o)
-
-	* share/list: add back mkreiserfs
-
-	* standalone/XFdrake: don't start xfs if skiptest
-
-	* fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains
-	only true
-	hard drives (not pseudo one like raid, loopback and lvm)
-
-	* bootloader.pm (suggest): trap strange error. Should not really fix the
-	pb
-
-	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
-	detetection
-
-	* lang.pm (charset): fix for chineese which have charset in the name
-
-	* Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
-	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
-	dependencies"
-
-	* install_any.pm (setPackages): don't preselect profiles in upgrade
-	(setPackages): handle Flag:<theflag>
-	(setPackages): install kernel22 if install kernel is a 2.2
-
-	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
-	(didn't
-	propose to format it)
-	protect the loading of module lvm-mod
-
-2001/04/03  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button
-	emulation
-
-2001/04/03  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: a lot of bugfixs
-	corrected bad flag test
-	corrected bad priority
-
-	* standalone/draknet: typo
-	bug fixes
-	removed debugging messages and Data::Dumper
-	corrected bad flag test
-
-2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file
-
-2001/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_raw): add the require install_any
-
-	* share/rpmsrate: restore Aurora (i really don't understand what i've done
-	with flag AURORA a month ago) to a simple behaviour
-
-	* lang.pm (charset): fix for chineese which have charset in the name
-
-	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
-	detetection
-
-	* Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
-	* install_steps_interactive.pm (choosePackages): do not make a special
-	case for upgrades (was: select the
-	min size, which was on contradiction with profile selection)
-
-	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
-	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
-	dependencies"
-
-	* install_any.pm (setPackages): don't preselect profiles in upgrade
-	(setPackages): handle Flag:<theflag>
-	(setPackages): install kernel22 if install kernel is a 2.2
-
-	* share/list: add back mkreiserfs
-
-	* standalone/XFdrake: don't start xfs if skiptest
-
-	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
-	(didn't
-	propose to format it)
-	protect the loading of module lvm-mod
-
-2001/04/02  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: corrected petite's mistake
-
-	* netconnect.pm: protecting against non existent files
-
-2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix
-	comply to all.kernels policy
-
-	* tools/make_mdkinst_stage2: fix remove of alternate cz modules
-
-2001/04/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: Updated Czech file
-
-	* lang.pm: codepage option to mount requires only numeric values, eg "437"
-	and not "cp437"
-	Changed accordingly in the lists
-
-	* share/rpmsrate: Install latin2 Postscript fonts for latin2 locales,
-	install fonts-ttf-thai for Thai locale
-
-2001/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile: small cleanup for pcmcia_probe.c
-
-	* tools/Makefile (install): s/-r/-rf/
-
-	* install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/
-	(setPackages): install imwheel if nbuttons > 3
-
-	* c/Makefile.PL: small cleanup for pcmcia_probe.c
-	don't use pcmcia_probe.o from stage1, better compile it here, otherwise
-	perl-install require mdk-stage1 to do compiled => circular dependency
-
-	* Makefile: ignore dams or at least dams errors
-
-	* c/.cvsignore: add pcmcia_probe.c
-
-2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/make_rescue_img: fix pixelization (aka take advantage of
-	all.kernels/.main)
-
-2001/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile (install): s/-r/-rf/
-
-2001/03/30  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile (install): fix the globbing for packdrake.pm and
-	rpmtools.pm
-
-2001/03/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/drvinst: test for "Card:" and not install, some videoboards are
-	not reported as DISPLAY_VGA :-(
-
-	* tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img,
-	mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more
-	than one boot kernel :-)
-
-	* rescue/list.i386: add reiserfsck
-
-2001/03/29  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: bad message at the end if kernel2.4
-
-	* netconnect.pm: added missing Device in Ethx when saving/loading
-
-	* standalone/draknet: translation
-
-2001/03/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/tinyfirewall: typo
-
-	* interactive_gtk.pm: corrected pixel shit if embedded
-
-	* standalone/draksec: embedded mode
-
-	* standalone/draknet: corrected gtkpng in gtkwpm
-	added translation
-
-	* bootlook.pm: cute button box
-
-	* tinyfirewall.pm: workaround to make it work if kernel 2.4
-
-2001/03/28  fcrozat
-
-	* share/rpmsrate: gmc is back in standard GNOME install, for people with
-	existing home
-
-2001/03/28  François Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for
-	standalone XFdrake and mousedrake (multi-mouse and
-	correct probe (USB)).
-
-	* Xconfig.pm: re-fix mouse fix.
-	fixed wrong mouse probe.
-	fixed for standalone XFdrake and mousedrake (multi-mouse and
-	correct probe (USB)).
-
-	* Xconfigurator.pm: restore multi mouse support for XF3.
-
-2001/03/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish,
-	Finnish, Croatian and Turkish files
-
-	* share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files
-
-	* share/po/az.po: Updated Azeri and Danish files
-
-	* share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
-	files
-	Updated Finnish, Korean and Slovak files
-
-	* share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
-	files
-	Updated Azeri and Danish files
-
-2001/03/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: add fstab in the log
-
-	* interactive_gtk.pm: better default_size setting
-
-	* commands.pm: fix typo
-	add fstab in the log
-
-	* install_gtk.pm (test_mouse): ensure the test mouse is not too big
-
-2001/03/28  warly
-
-	* share/rpmsrate: add some commercial apps
-
-2001/03/27  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: added kill USR2 before main
-
-	* share/help.png: changed help button
-
-	* share/help.xpm: changed help
-
-	* tinyfirewall.pm: workaround to make it xork.
-
-2001/03/27  François Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
-	* Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported
-	currently.
-
-2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po,
-	share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po,
-	share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese,
-	Indonesian, Japanese, Korean and Walloon files
-	changed i18n_compssUsers to make "path" i18n'able
-
-2001/03/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: warnAboutNaughtyServers
-	(setPackages): default profiles selection to GNOME, KDE, CONFIG
-
-	* install_steps_interactive.pm: warnAboutNaughtyServers
-	(summary): fix displaying of printer configured
-
-	* pkgs.pm: warnAboutNaughtyServers
-
-	* install_steps_gtk.pm (installPackages): catch the no png file exception
-	(in case warly is dumb again)
-
-	* my_gtk.pm: try to fix displaying in draksec
-	(create_box_with_title): save the box_size in field "box_size"
-
-	* install2.pm, any.pm: remove use of Bastille. get back to the good state
-	we had :)
-
-	* interactive_gtk.pm: try to fix displaying in draksec
-
-	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
-	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
-	LOCALES"zh"
-	  - raise WindowMaker
-	  - add xfce
-	  - am-utils is a server
-	  - raise some stuff in CONFIG to have stuff there
-	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
-	  - DrakConf from 5 to 4
-
-	* lang.pm (langsLANGUAGE): give the list of languages
-
-2001/03/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm: change verbage on bootloader warning
-
-2001/03/27  siegel
-
-	* share/po/de.po: minor typo-fixes
-
-2001/03/27  dam's  <damien@mandrakesoft.com>
-
-	* share/help.png: changed help button
-
-	* share/help.xpm: changed help
-
-2001/03/27  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now
-	postponed at end of install
-	and only if rpm-4.0 or above has been installed.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
-	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added
-	support for two mice (laptop). The second mice is generally PS/2 as
-	probe can says it is present.
-
-2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm, install2.pm: remove use of Bastille. get back to the good state
-	we had :)
-
-	* install_any.pm: warnAboutNaughtyServers
-	(setPackages): default profiles selection to GNOME, KDE, CONFIG
-
-	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
-	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
-	LOCALES"zh"
-	  - raise WindowMaker
-	  - add xfce
-	  - am-utils is a server
-	  - raise some stuff in CONFIG to have stuff there
-	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
-	  - DrakConf from 5 to 4
-
-	* install_steps_interactive.pm: warnAboutNaughtyServers
-	(summary): fix displaying of printer configured
-
-	* lang.pm (langsLANGUAGE): give the list of languages
-
-	* pkgs.pm: warnAboutNaughtyServers
-
-	* install_steps_gtk.pm (installPackages): catch the no png file exception
-	(in case warly is dumb again)
-
-2001/03/27  siegel
-
-	* share/po/i18n_compssUsers: i18n group names
-
-	* share/po/de.po: minor typo-fixes
-	new german version
-
-2001/03/26  daouda
-
-	* share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate)
-
-2001/03/26  fcrozat
-
-	* share/rpmsrate: Install xscreensaver when installing GNOME
-
-2001/03/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: first attempt at pixelization of code (till's cups
-	patches)
-
-2001/03/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon
-	files
-
-	* share/po/vi.po: Updated Croatian, vietnamese and Walloon files
-	Updated Portuguese, Swedish and Thai files
-
-	* share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po,
-	share/po/sv.po: Updated Portuguese, Swedish and Thai files
-
-2001/03/25  Pixel  <pixel@mandrakesoft.com>
-
-	* http.pm (getFile): verify the return value of the server. If not 200
-	(aka Ok),
-	return undef
-
-	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
-	and libqtcups2 for kups in
-	pkg_install_if_requires_satisfied
-
-2001/03/25  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/25  fabman
-
-	* share/po/es.po: updated spanish .po file
-
-2001/03/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: Updated Korean file
-
-	* share/po/sv.po: Updated Swedish file
-
-2001/03/25  Pixel  <pixel@mandrakesoft.com>
-
-	* http.pm (getFile): verify the return value of the server. If not 200
-	(aka Ok),
-	return undef
-
-	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
-	and libqtcups2 for kups in
-	pkg_install_if_requires_satisfied
-
-	* any.pm (ask_users): fix dead-loop
-
-	* bootloader.pm (suggest): add entry for nt
-
-2001/03/25  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: Updated Vietnamese file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which
-	is unneeded (and "member" of merge2pcitable
-	was clashing)
-
-	* any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user
-	is given.
-
-	* install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users
-
-	* install_any.pm (disable_user_view): created, takes care of gdm too
-	(taken from msec)
-
-	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
-	francois's bugs ;pp
-
-	* timezone.pm (%l2t): fix for fuzzyChoice
-
-	* share/keyboards.tar.bz2: 
-	  - readding with -kb
-	  - fixing permissions on xmodmap.kr
-	remove before adding again with -kb
-
-	* modules.pm: have natsemi in network.img
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
-	francois's bugs ;pp
-
-	* timezone.pm (%l2t): fix for fuzzyChoice
-
-	* modules.pm: 
-	  - add missing modules (now in sync with pcitable)
-	  - add 'media' class
-	  - cleanup
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (copy_advertising): fix escaping $f causing perl to
-	segfault :-(
-	(copy_advertising): handle i18n'ed advertising
-
-	* pkgs.pm: cleanup
-
-	* modules.pm: 
-	  - add missing modules (now in sync with pcitable)
-	  - add 'media' class
-	  - cleanup
-
-2001/03/24  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected bad exited. reincorporated some ugly code,
-	need fixing
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (copy_advertising): handle i18n'ed advertising
-
-	* modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel
-	2.4
-
-2001/03/23  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed screen id for Device to be present whenever the
-	same BusID is used.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* printerdrake.pm: Do not ask to configure a printer if standalone,
-	previously only for embended.
-
-	* Xconfig.pm: fixed typo for wacom.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
-	multiple tablet support (wacom), moved usb probe for mouse and tablet
-	at the beginning.
-
-2001/03/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
-	(ask_from_listf_no_check): fix the fix fix
-
-	* common.pm (formatError): created
-
-	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
-	DHCP/BOOTP
-
-	* diskdrake.pm (try): format the error (no more "at line ...")
-	(Add2LVM): "new" was not i18n'ed
-
-	* install_steps_interactive.pm (exitInstall): no "cancel" button
-
-	* partition_table.pm: add Empty to bad_types
-
-	* fsedit.pm (change_type): When changing a partition type from ext2fs to
-	Linux RAID
-	(or LVM), the mount point should be removed.
-
-2001/03/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/23  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected bad translation
-	correctedd typo
-	updated
-	code cleaning
-	tinyfirewall now works.
-
-	* Makefile.config: added tinyfirewall
-
-	* any.pm, mouse.pm: added /dev/modem in modem list selection
-
-	* standalone/drakxconf: added tinyfirewall entry
-
-	* standalone/tinyfirewall: added update code
-	updated wrapper to launch tinyfirewall in embedded mode
-
-	* netconnect.pm: added /dev/modem in modem list selection
-	netconnect doesn't write the file 1
-
-2001/03/23  fcrozat
-
-	* share/rpmsrate: nautilus-mozilla and xalf are installed by default in
-	GNOME
-	gmc is not installed by default in GNOME
-	gabber gaim are moved to instant messaging
-	gcombust in moved to GNOME CD burner
-	gtm is installed by GNOME/File transfer
-	mozilla is installed by default as www browser
-	galeon is installed by default as www browser for GNOME
-
-2001/03/23  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/syncrpms: added size-stamp test to copy identical file in version,
-	release.
-
-	* Xconfig.pm: fixed typo for wacom.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe
-	for mouse and tablet
-	at the beginning.
-	fixed wrong usage of Screen keyword in Device section, should be present
-	and
-	reseted for any multi head card with only one BusID.
-
-	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
-	multiple tablet support (wacom), moved usb probe for mouse and tablet
-	at the beginning.
-
-2001/03/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file
-	Updated Finnish file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Added Vietnamese file
-
-2001/03/23  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: ifix the dams stuff
-
-	* install_steps_interactive.pm (exitInstall): no "cancel" button
-
-	* share/po/i18n_compssUsers: fix for better compliance with po format
-
-	* netconnect.pm: ifix the dams stuff
-	cleanup and enable gzip'ed isdn.db
-
-	* Makefile: gzip ldetect-lst files
-
-	* modules.pm: add i810_audio (still need a script to add missing one and
-	keep in sync)
-
-	* bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives
-
-	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
-	(ask_from_listf_no_check): fix the fix fix
-	(ask_from_listf_no_check): fix the bad fix
-
-	* common.pm (formatError): created
-	(openFileMaybeCompressed, catMaybeCompressed): added
-	(getVarsFromSh): take care of comments
-
-	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
-	DHCP/BOOTP
-
-	* partition_table.pm: add Empty to bad_types
-
-	* mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug)
-
-	* fsedit.pm (change_type): When changing a partition type from ext2fs to
-	Linux RAID
-	(or LVM), the mount point should be removed.
-
-	* detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale
-	(isFloppyOrHD): floppy type is 'fd', not 'floppy'
-	(stringlist): nicer (a la new lspcidrake)
-
-	* Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and
-	MonitorsDB
-
-	* diskdrake.pm (try): format the error (no more "at line ...")
-	(Add2LVM): "new" was not i18n'ed
-
-2001/03/23  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC,
-	use vmlinux for PPC
-	prepend of_dev to initrd stanza in yaboot.conf
-	add 1-button mouse for PPC
-
-2001/03/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/22  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139:
-	Add 8139 grub stage.
-
-2001/03/22  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected mapn
-
-	* standalone/draknet: removed use Data::Dumper
-
-	* netconnect.pm: removed mail informat oin
-	comment update
-
-	* tinyfirewall.pm: removed use Data::Dumper
-	working on tinyfirewall
-
-2001/03/22  fabman
-
-	* share/po/es.po: changed "swap" for "intercambio" in the spanish .po
-	files
-	updated DrakX, menudrake and urpmi es.po files
-
-2001/03/22  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed wrong access to undefined value promoted to
-	empty array reference.
-
-2001/03/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c, mdk-stage1/tools.h: 
-	  - fix detection of more than 3 scsi attached devices
-	  - cleaner code for cmp of ptr against static strings
-
-2001/03/22  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake: remove test ugliness of dams
-
-	* c/Makefile.PL: no pcmcia_probe in drakxtools
-
-	* modules.pm (load_thiskind): indent as it should be
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): fix the message
-	which was uptodate only for
-	sparc :-(
-
-	* Xconfigurator.pm: no need for "use Data::Dumper;"
-
-2001/03/22  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should
-	have been mace
-
-2001/03/22  yduret
-
-	* bootlook.pm: mapn works tx dams
-	nmap
-	added mapn fun to reduce code.. testing it
-	added install of rpm
-	xpm  png files
-
-	* pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm,
-	pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm,
-	pixmaps/verti.xpm: convert xpm to png
-
-2001/03/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool
-
-	* netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug
-
-2001/03/21  François Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: added pci id reference.
-
-	* c/stuff.xs.pm: added support for pci id extraction.
-
-	* Xconfigurator.pm: fixed wrong XFree4 version reference.
-	fixed null string in monitor identifier.
-	added multi-head support in XFdrake.
-
-2001/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: honour embedded mode
-
-	* share/compssUsers: move NETWORKING_FILE (contains stuff for nfs
-	mounting..) from Internet
-	Station to Network Computer
-
-2001/03/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated
-	Croatian and Serbian files
-
-	* share/po/sp.po, share/po/sr.po: Updated Serbian files
-	Updated Croatian and Serbian files
-
-	* share/po/az.po: Updated Azeri file
-	Updated Croatian and Serbian files
-
-	* share/po/sk.po: Updated Azeri and Slovak files
-	Updated Croatian and Serbian files
-
-	* lang.pm: Added fields to charsets table holding info for mount
-	(iocharset and
-	codepage mount options)
-
-2001/03/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_default_packages): nice warning if mount in vfat fails
-
-	* share/rpmsrate: move webmin to CONFIG
-	remove ipchains and iptables, raise gfcc
-
-	* docs/README: add cvs howto
-
-	* install_steps_interactive.pm (summary): fix
-
-	* detect_devices.pm: old code
-
-	* bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo
-	doesn't like them
-	(add_kernel): cleanup
-	(suggest): make it work with kernel22-secure and no kernel22
-
-	* modules.pm (when_load): move the alias sound to when_load, don't check
-	ppc as it
-	could be used for non-ppc
-	(load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for
-	every
-	load_thiskind, not only scsi one
-
-	* c/stuff.xs.pm (from_utf8): as pablo said...
-
-2001/03/21  siegel
-
-	* share/po/de.po: new german version
-	new german version
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (@drivers_by_category): if_ization
-	(load_thiskind): cleanup
-
-2001/03/21  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (add_kernel): cleanup
-	(suggest): make it work with kernel22-secure and no kernel22
-
-	* share/rpmsrate: remove ipchains and iptables, raise gfcc
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: no wizard if warning
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix pcmcia functions only on x86
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-	* modules.pm (@drivers_by_category): if_ization
-	(load_thiskind): cleanup
-
-	* any.pm, install2.pm, share/rpmsrate: use bastille backend
-
-	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-
-	* install_steps.pm, install_any.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add
-	routine for - PPC
-	any.pm: double "Append" entry in expert mode for yaboot.conf - PPC
-	install_steps_interactive: setup dmasound - PPC
-	modules.pm: load Mac hardware modules - PPC
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bug in reading resolv.conf, and changed chmod
-	for net_cnx_*
-
-	* interactive.pm: no wizard if warning
-
-	* standalone/draknet: added update after {dis}connecting
-
-2001/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* diskdrake.pm: fix formatting of raid
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: use bastille backend
-	  - add nautilus
-
-	* install_steps_interactive.pm: fix pcmcia functions only on x86
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-	(setupSCSI): don't pcmcia_probe if testing
-	  - tellAboutProprietaryModules moved to setupSCSI
-	  - miscellaneous step re-enabled, called Security
-	  - pcmcia_probe moved to setupSCSI, skipped in noauto
-
-	* any.pm: use bastille backend
-
-	* install2.pm: use bastille backend
-	  - tellAboutProprietaryModules moved to setupSCSI
-	  - miscellaneous step re-enabled, called Security
-	  - pcmcia_probe moved to setupSCSI, skipped in noauto
-	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
-	parameter any more)
-
-	* netconnect.pm (modem_detect_backend): cleanup
-
-	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
-	parameter any more)
-
-	* Makefile: install cardmgr
-
-	* install_any.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-	(setPackages): install usbd in case of usb
-
-	* install_steps.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC
-	detect_devices.pm: forgot to remove commented code after test
-	netconnect.pm: load macserial module for PPC
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet, netconnect.pm: improved connection windows, and
-	loading / saving of /etc/sysconfig/network-scripot/netècnx*
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add nautilus
-
-	* install_any.pm (setPackages): install usbd in case of usb
-
-	* Makefile: install cardmgr
-
-2001/03/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fsedit.pm: fix loopback appearing twice in format partition
-
-	* diskdrake.pm: fix "loopback" name of loopback tab in diskdrake
-
-2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated korean file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (computeGroupSize): fix hacks, better hacks
-	(saveCompssUsers): fix
-
-	* install_steps_interactive.pm (chooseGroups):
-	  - make the computed size work
-	  - unselectAll when a profile is unselected
-
-	* interactive_gtk.pm (ask_from_entries_refW): better sizing in case of
-	scrolls
-
-2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected graphical layout for newbies
-
-	* netconnect.pm: added net_cnx_{up, down} save
-
-2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated korean file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (computeGroupSize): fix hacks, better hacks
-	(saveCompssUsers): fix
-
-	* share/rpmsrate: 
-	  - add rxvt-CJK
-	  - exchange xterm and rxvt
-	  - move bc from SCIENCES to SYSTEM
-
-	* interactive_newt.pm (ask_from_entries_refW):
-	  - ensure the width is less than $width - 7 (in french and 80x25, the
-	treelist was too big)
-	  - if term is very big, use 10 lines instead of 5
-	  - if no button is asked, but one in any case otherwise it's buggy
-
-	* install_steps_interactive.pm (chooseGroups):
-	  - make the computed size work
-	  - unselectAll when a profile is unselected
-
-	* interactive.pm (ask_from_listf_no_check): fix fix
-	(ask_from_listf_no_check): fix the filtering of exceptions
-
-2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for
-	hd-install when you provide a not valid ISO (cd #2 for example)
-
-	* mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h,
-	mdk-stage1/log.h: use some help with __attribute__
-
-2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup
-
-	* mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync
-
-	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
-	editing ask_from_entries in stdio mode
-
-	* mdk-stage1/pci-resource/Makefile: do not use marfiles for deps
-
-2001/03/17  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
-	* install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
-	* share/rpmsrate: add gpm & evolution
-
-2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to
-	work with dietlibc
-
-	* mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET
-	for testing purposes..
-
-	* mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new
-	mkinitrd package release
-
-	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
-	editing ask_from_entries in stdio mode
-
-2001/03/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese
-	keyboard
-
-	* keyboard.pm: Added choice of Korean keyboard
-
-2001/03/17  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
-	* install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
-	* share/rpmsrate: add gpm & evolution
-
-2001/03/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/Makefile: refine deps
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile,
-	mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper
-
-	* mdk-stage1/insmod-busybox/insmod.c: force load
-
-2001/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): set flag "TV" when bttv hardware is there
-
-	* share/compssUsers, share/rpmsrate: move out TV from VIDEO
-
-	* diskdrake.pm (Type): fix the code verifying size >32 for reiserfs
-
-	* modules.pm (write_conf): better logging
-
-	* c/stuff.xs.pm: add from_utf8
-
-	* c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and
-	description
-
-2001/03/16  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert,
-	tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic,
-	mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad
-	gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot -
-	remove/re-add - did not use -kb switch - thx Pixel
-
-2001/03/15  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: SiS card are no more prefered for XF3.
-	added standalone support to prefer XF3 or XF4 to
-	keep current used server version.
-
-	* standalone/XFdrake: remove duplicate begin label.
-	take care of existing configuration.
-
-2001/03/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: skip dc395x_trm on stage1
-	dc395x_trm is back in 2.4
-
-	* share/compssUsers: try to enhance
-
-2001/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2001/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says
-	this is not needed anymore :)
-
-2001/03/15  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot,
-	tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot,
-	tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD,
-	mkhybrid-1.12b5.4, yaboot: create PPC CD
-
-	* install_steps_interactive.pm, detect_devices.pm, bootloader.pm:
-	bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed
-	temporary file read/write per Pixel
-
-	* Xconfigurator.pm: force 1024x768 on Powerbook
-
-	* tools/ppc/README: README: README for creating PPC boot CD
-
-2001/03/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: changed label + profile before types..
-
-2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po,
-	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po,
-	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po:
-	corrected the script and updated po files
-
-2001/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: keep only one Development entry
-
-	* install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation
-
-	* bootlook.pm: fix for perl2fcalls
-
-	* install_steps_interactive.pm (chooseGroups): disable the size display as
-	it is wrong (for the beta2)
-
-2001/03/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm,
-	partition_table_mac.pm, bootloader.pm: fix bootstrap partition
-	creation/tracking
-	allow Xpmac to launch in 2 modes based on cmdline
-
-2001/03/14  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: changed label + profile before types..
-
-2001/03/14  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed unselect management of choice, propagate unselection
-	correctly to all
-	packages requiring unselected package.
-
-	* install_any.pm: use LD_LOADER when invoking parshedlist.
-
-2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/nl.po: updated Norwegian file
-
-	* share/locales.tar.bz2, share/gconv.tar.bz2, share/list,
-	share/fonts.tar.bz2: new fonts and locale files
-
-	* share/po/ko.po: Fixed email of Korean translator
-	updated Korean file
-
-	* install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm:
-	completed language list
-	completed language->keyboard guessing list
-	aesthetic changes to an English message (removed \n and let gtk+
-	do the formatting, it is nicer)
-
-	* share/po/az.po: Updated Azeri file
-
-2001/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: fix the compssUsers interpretation
-	(readCompssUsers): change the key of compssUsers, added "label"
-	(computeGroupSize): fix bug
-	(computeGroupSize): fix logging
-
-	* share/gconv.tar.bz2: moved to share/list
-
-	* bootlook.pm: fix for perl2fcalls
-
-	* share/rpmsrate: CLIENT & SERVER is prohibited
-
-	* timezone.pm: 
-	  - add many timezones
-	  - defaults to GMT
-	  - verifier added
-
-	* install_steps_gtk.pm: fix the compssUsers interpretation
-	(choosePackagesTree): fix
-
-	* common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return
-	the number
-	of matched words/characters
-
-	* share/compssUsers: keep only one Development entry
-	CLIENT & SERVER is prohibited
-
-	* install_steps_interactive.pm (chooseGroups): disable the size display as
-	it is wrong (for the beta2)
-	(chooseGroups): add path for seperating groups, use "label" for the
-	group text
-
-	* Makefile: remove gconv
-
-2001/03/13  siegel
-
-	* share/po/de.po: Fixed typos.
-
-2001/03/13  siegel
-
-	* share/po/de.po: Fixed typos.
-
-2001/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/help.png: changed
-
-2001/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers
-	for the tree
-
-	* standalone/drakgw: pixelization
-
-	* share/rpmsrate: HDF can't be at the beginning of the line or it will be
-	taken as a flag
-	moved icewm to SYSTEM with !KDE !GNOME
-
-	* pkgs.pm: compss is deprecated. use compssUsers for the tree
-	(readCompssUsers): get the "path"
-
-	* install_steps.pm: compss is deprecated. use compssUsers for the tree
-	renamef created and used
-
-	* detect_devices.pm (burners): don't use cdroms() which return scdX for
-	ide burners, and
-	isBurner don't use the same technique. so use get() and grep for type
-	"cdrom"
-
-	* install_any.pm: compss is deprecated. use compssUsers for the tree
-	(setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA
-	renamef created and used
-
-	* install_steps_interactive.pm: compss is deprecated. use compssUsers for
-	the tree
-	(chooseGroups): fix to get back the icons
-	(chooseGroups): size computed should work
-
-	* common.pm: renamef created and used
-
-2001/03/13  siegel
-
-	* share/po/de.po: new german translation
-
-2001/03/13  warly
-
-	* share/compssUsers: fix {W,w}orkstation
-	remove ^Server and ^Development
-
-2001/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakgw: pixelization
-
-	* install_steps_interactive.pm (chooseGroups): size computed should work
-
-	* share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME
-
-	* install_steps.pm, common.pm, install_any.pm: renamef created and used
-
-2001/03/12  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: removed wizard pixmap from install
-
-	* pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated
-	added pixmap for wizard
-
-	* my_gtk.pm: new wizard layout, with pixmaps.
-	added ugly workaround for ugly Hseparator
-
-	* share/step-red.png, share/step-orange.png, share/step-orange-click.png,
-	share/step-green-click.png, share/step-green.png, share/step-red-on.png,
-	share/step-orange-on.png, share/step-green-on.png,
-	share/step-green_s.png, share/step-red-click.png: removing bad png
-	files...
-
-	* share/help.png: new help button. blah
-
-	* install_any.pm: typo
-
-	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated
-
-	* netconnect.pm: corrected askokcancel -> askyesorno
-
-	* interactive.pm: corrected bad okcanel in wizard mode
-
-	* install_steps_interactive.pm: added $::isInstall
-
-	* share/logo-mandrake_trans.png: new logo for other themes
-
-	* services.pm: removed use Data::Dumper
-	corrected bug in display
-
-2001/03/12  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm,
-	live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should
-	work for other
-	combination but not tested. fixed locale usage and gtk environment
-	interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX).
-	created LD_LOADER environment variable to keep track of right ELF loader
-	to be used for the GLIBC used by the live update. added internal PATH
-	to LD_LIBRARY_PATH as ELF loader only check this one and not PATH.
-
-2001/03/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - make it work as a wizard
-	  - make it work with iptables (kernel-2.4)
-
-	* modules.pm: reflect Jeff Garzik's answers to my questions on kernel@
-
-2001/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po,
-	share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po,
-	share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque
-	file
-
-2001/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): save the compssUsers flattened
-	for rpmdrake
-
-	* install_steps_interactive.pm (summary): remove 'clicked' (labels are
-	used)
-	put everything in %compssUsers, use field flags for the flags :)
-
-	* pkgs.pm (computeGroupSize): log what is found
-	(saveCompssUsers): make it work
-	(readCompssUsers): clean-up
-	(saveCompssUsers): created
-	put everything in %compssUsers, use field flags for the flags :)
-	(computeGroupSize): created
-
-	* share/rpmsrate: lower Zope (anyway Zope is not in main)
-
-	* fsedit.pm (hds): search for existing lvm in @hds *and* @lvms
-
-	* commands.pm (loadkeys): created
-
-	* install_any.pm (setPackages): don't readCompssUsers with $o->{packages}
-	(setPackages): kernel-secure doesn't exist anymore, use kernel22-secure.
-	don't use kernel-secure as a kernel-smp.
-	put everything in %compssUsers, use field flags for the flags :)
-	(setPackages): set compssUsersChoice "3D" if 3D enabled graphic card
-
-	* interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries
-	add "label" type
-
-	* share/compssUsers: change the path format
-
-	* detect_devices.pm (get_mac_model): fix for perl2fcalls
-
-	* interactive.pm: add "label" type
-
-2001/03/12  warly
-
-	* share/compssUsers: add some NETWORKING_* that were empty
-	dispach some DEVELOPMENT and SERVER to more appropriate groups
-	added path
-
-	* share/rpmsrate: add some NETWORKING_* that were empty
-	dispach some DEVELOPMENT and SERVER to more appropriate groups
-
-2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ftp.pm: do not retry on 550 file unavailable
-
-2001/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled
-	graphic card
-
-2001/03/11  dam's  <damien@mandrakesoft.com>
-
-	* services.pm: no more restart button
-
-2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ftp.pm: do not retry on 550 file unavailable
-
-2001/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (summary): fix clicked empty handler
-
-	* share/rpmsrate: 
-	  - lower tftp-server
-	  - a lot of modifs (thanks to Prana)
-
-2001/03/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakxservices: embedded mode
-
-	* my_gtk.pm: added gtkset_border_width
-	typo again
-	typo
-	added gtkmove
-	added gtkset_modal and gtkappenditems
-
-	* services.pm: fixed big bug.
-	imajor improvement.
-	improved.
-
-2001/03/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Korean file
-
-2001/03/09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakxconf: added harddrake
-
-	* my_gtk.pm: applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-	added gtkradio
-
-	* bootlook.pm: workaround for the graphical layout.
-
-	* install_steps_gtk.pm: applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-
-	* printerdrake.pm: if embedded -> no first question
-
-	* interactive_gtk.pm: added tooltips to create_boxradio
-	applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-
-2001/03/09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
-	DEVELOPEMENT
-
-2001/03/09  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: keyboard mapping for PPC
-
-	* detect_devices.pm: routine to detect MacIntosh model code
-
-2001/03/09  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: added gtkradio
-
-	* standalone/draknet: changed graphical layout, expert mode
-
-2001/03/09  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (read_rpmsrate): handle the special case of packages requiring
-	locales-*,
-	adding the flag LOCALES"*" for them
-
-	* install_steps_interactive.pm (choosePackages): moved the log to
-	install2::choosePackages (to have it in
-	auto_installs too)
-
-	* install_any.pm (setPackages): set compssUsersChoice LOCALES"*"
-
-	* install2.pm (choosePackages): log groups choosen
-
-	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
-	DEVELOPEMENT
-	  - chineese packages
-	  - move Aurora's to AURORA (DrakX take care of Aurora)
-
-	* install_steps_gtk.pm (remove_advertising): created
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* verify_c: fix the regexp
-
-	* detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: applied if__
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* verify_c: fix the regexp
-
-	* share/rpmsrate: add i18n'ed packages
-
-	* detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* common.pm: added if__
-
-	* netconnect.pm: applied if__
-
-2001/03/08  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: avoid using e2fsck, else it abort by checking partition
-	size (which differs).
-	fix resize ext2 by using resize2fs.
-
-	* pkgs.pm: changed choice of package for selection.
-
-	* share/list: added resize2fs and dumpe2fs, removed ext2resize which is
-	replaced.
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not
-	honoured by kernel
-
-2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: advertising modifs
-	(setPackages): use burners instead of IDEburners
-
-	* bootloader.pm: cleanup
-
-	* interactive.pm (ask_from_listf_no_check): catch wizcancel and return
-	undef
-
-	* fs.pm (write_fstab): change again for 'none' checking the mount point
-	(write_fstab): special case for device ``none'' (which can be mounted
-	twice or more :)
-
-	* my_gtk.pm (_create_window): on delete_event, destroy the window and
-	raise wizcancel
-
-	* share/po/fr.po: fix bad translation
-
-	* share/rpmsrate: add i18n'ed packages
-	raise kdebase
-
-	* install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs
-
-	* detect_devices.pm: cleanup
-	(isBurner): use syslog to detect scsi burners
-
-2001/03/08  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp
-
-	* partition_table_mac.pm: fixed variable referencing - thx Pixel
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad pci number -> string
-
-2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated
-	Bulgarian, Catalan and Serbian files
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (dev2grub): better error reporting
-
-	* tools/cvslog2changelog.pl (%users): add stew
-
-	* install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix
-
-	* share/rpmsrate: raise kdebase
-	xcdroast is the best cd burner ui, raise it above others
-	lower some EDITORS
-	raise vim-X11
-	lower xrn, raise pan
-
-	* install_any.pm (setPackages): use burners instead of IDEburners
-	(setPackages): at least set BURNER for ide burners
-
-	* any.pm: cleanup
-
-	* install_steps_interactive.pm, install2.pm: re-add miscellaneous step,
-	but always hidden (aka automatic)
-
-	* detect_devices.pm (isBurner): use syslog to detect scsi burners
-
-	* fs.pm (write_fstab): special case for device ``none'' (which can be
-	mounted
-	twice or more :)
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
-	(without mem=)
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad pci number -> string
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
-	(without mem=)
-
-2001/03/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected default focus after detection
-	don't test adsl if net install
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): remove the alias block-major-11 as it's
-	overriding the
-	default alias to sr_mod, and is uneeded with scsi_hostadapter being
-	added
-	to /etc/modules.conf
-
-	* share/rpmsrate: lower heartbeat
-
-2001/03/07  sbenedict
-
-	* help.pm: * perl-install/help.pm  - typo in yaboot help
-
-	* any.pm: * perl-install/any.pm - fixed two $l vs. @l references -
-	bootloader menu, need image/boot in rec mode PPC
-	CVl:
-	----------------------------------------------------------------------
-
-	* devices.pm: * perl-install/devices.pm - add adbmouse
-
-2001/03/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages
-
-2001/03/07  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm, bootloader.pm: fixed support for other kernel for
-	bootloader entries.
-	automatically add 2.2 entries for kernel22 (manage hack-kernel too).
-
-	* Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card.
-
-	* pkgs.pm: added support for killing all child process of a transaction,
-	necessary to be
-	able to umount cdrom and eject it correctly.
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: use gb16fs instead of gb16st
-
-	* modules.pm (add_alias): remove the alias block-major-11 as it's
-	overriding the
-	default alias to sr_mod, and is uneeded with scsi_hostadapter being
-	added
-	to /etc/modules.conf
-
-	* share/rpmsrate: lower heartbeat
-	lower Mesa's rate
-
-	* install2.pm (main): save $@ in $err so that it's not modified before
-	being used
-
-	* share/locales.tar.bz2: remove ending '/' in symlinks not pleasing
-	packdrake
-
-	* standalone/drakboot: make it please perl2fcalls
-
-2001/03/07  sbenedict
-
-	* bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force
-	XF4 for PPC in recommended mode
-	* perl-install/bootloader.pm - rework get_of_dev to work in live install
-
-	* install_steps_interactive.pm, any.pm, partition_table_mac.pm: *
-	perl-install/any.pm - change in partition_table_mac'xxx syntax
-	* perl-install/install_steps_interactive.pm - change in
-	partition_table_mac'xxx syntax
-	
-	* perl-install/partition_table_mac.pm - change in
-	partition_table_mac'xxx syntax
-
-2001/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: Fixed French typos reported by tester
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: use gb16fs instead of gb16st
-
-	* fsedit.pm: fix typo
-
-	* install2.pm (main): save $@ in $err so that it's not modified before
-	being used
-
-	* share/rpmsrate: lower Mesa's rate
-
-	* standalone/drakboot: make it please perl2fcalls
-
-2001/03/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad %intf while savung
-	don't ask configuration if expert
-	now detecting adsl
-
-	* standalone/draknet: remmoved 'quiting appli' screen
-
-2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: fix save of automatic stage1 info for static network
-
-	* mdk-stage1/init.c: do not display from syslog msg's from RPM telling
-	that it
-	installed/removed some pkg's
-
-	* mdk-stage1/Makefile: fix includes for init
-
-2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese
-	file
-
-2001/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* perl2fcalls: 
-	  - small fix for bootlook.pm
-	  - don't display reused
-
-	* detect_devices.pm (stringlist): if no text description, display ids
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): comment old code
-	(summary): fixes
-	(setupSCSI): cleanup
-	(summary): display sound/tv/isdn cards found
-
-	* fsedit.pm (check_mntpoint): don't allow LVM on / or /boot
-	(@suggestions_mntpoints): add /boot
-
-	* install_any.pm: hack to make perl2fcalls happy
-	(getHds): fix for no hd detected in newbie installs
-	(setPackages): s/snd-slot/sound-slot/
-
-	* install_steps_auto_install.pm (@graphical_steps): add
-	beforeInstallPackages so that advertisings are there
-
-	* install2.pm (setupSCSI): remove autoSCSI, cleanup
-
-	* http.pm, ftp.pm: don't use install_any
-
-	* modules.pm: add cciss
-
-	* partition_table.pm (add): create 3 primaries before creating an extended
-	if DAC960 (/dev/rd/*)
-	(add): max number of parts for rd, ida and cciss
-
-2001/03/06  yduret
-
-	* bootlook.pm: pixelisation
-
-2001/03/06  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: corrected bad file search
-	corrected intf setting
-
-	* standalone/draknet: added enable/disable networking button.
-
-	* standalone/drakxconf: updated to be launched frome DrakConf if no
-	DISPLAY
-
-	* netconnect.pm: now detecting adsl
-	typo
-	better load_conf
-
-	* Xconfigurator.pm: cleaned png displaying
-
-	* common.pm: setinhash -> set_in_hash
-	added setinhash
-
-	* fs.pm: typo
-	use set_in_hash
-
-2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic
-	mode
-
-	* mdk-stage1/Makefile: fix includes for init
-
-2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: corrected some typos, Updated Japanese file
-	updated Lithuanian file
-
-	* help.pm, standalone/draknet: corrected some typos, Updated Japanese file
-
-2001/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to
-	any::runlevel
-
-	* partition_table.pm (add): max number of parts for rd, ida and cciss
-
-	* fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash
-
-	* diskdrake.pm (Create): pixelization
-
-	* fsedit.pm (hds): pixelization
-
-	* install_steps_auto_install.pm (@graphical_steps): add
-	beforeInstallPackages so that advertisings are there
-
-	* modules.pm: add cciss
-
-	* install2.pm (main): remove unloading vfat (not needed anymore with
-	mdk-stage1)
-
-2001/03/05  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
-
-	* Makefile: added pixmaps copying
-
-2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* netconnect.pm, bootlook.pm, help.pm: fixed English typos
-
-2001/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use
-	generate_automatic_stage1_params
-
-	* c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK
-
-	* install_any.pm (generate_automatic_stage1_params): replace
-	generate_ks_cfg
-
-2001/03/05  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: added pixmaps copying
-
-	* standalone/draknet: required gtk only if needed, added redirection to
-	newt if needed
-
-	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
-	corrected short circuit if network install
-	corrected bad end message,
-	added copying of resolv.conf & modules.conf
-
-	* install2.pm: moved askrootpasswd and adduser before network conf
-
-	* network.pm: removed old NS0 fetching. /etc/resolv.conf is read in
-	install2.pm now
-	removed setdefaultroute and sethostname
-
-2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Latvian, Belarussian and Spanish files
-
-2001/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm (lv_create): fix typo
-
-	* bootloader.pm: add use devices
-	(install_grub): ensure the translated messages are not too big the hard
-	way
-
-	* install_any.pm (generate_automatic_stage1_params): replace
-	generate_ks_cfg
-	(install_urpmi): have "use hdlist ..." in any case
-
-	* my_gtk.pm: XSetInputFocus now done in perl-GTK
-	(_create_window): don't care about c::XSetInputFocus not existing
-
-	* any.pm (setupBootloader): pixelization
-	(setupBootloader): fix call to get_append
-
-	* interactive.pm (vnew): cleanup
-
-	* common.pm (salt): cleanup
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use
-	generate_automatic_stage1_params
-
-	* c/stuff.xs.pm: XSetInputFocus now done in perl-GTK
-
-	* c/Makefile.PL: compile fix
-
-	* diskdrake.pm (create_buttons4partitions_): fix for displaying LVM
-
-	* Xconfigurator.pm (xtest): use external xtest if standalone
-
-	* install2.pm (main): remove unloading vfat (not needed anymore with
-	mdk-stage1)
-
-2001/03/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	diskdrake.pm, share/po/af.po: updated po files
-
-2001/03/04  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work
-
-	* share/rpmsrate: 
-	  - remove autologin
-	  - move X11R6-contrib to DEVELOPEMENT and lower rate
-
-2001/03/04  stew   <sbenedict@mandrakesoft.com>
-
-	* any.pm - changes to enable yaboot configuration for PPC
-
-	* diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap
-
-	* install_steps_interactive.pm - auto-add Apple Bootstrap - PPC
-
-2001/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake,
-	install_interactive.pm, install2.pm: small fixes for LVM
-
-	* diskdrake.pm: don't default the LVM name to 'pp' ;pp
-	small fixes for LVM
-
-2001/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: small fixes for LVM
-	(doPartitionDisksAfter): small adaptation for LVMs
-	use run_or_die
-
-	* fsedit.pm: small fixes for LVM
-	(hds): detect LVMs and return them
-	(add): handling of LVMs
-	(@partitions_signatures): add new magic of reiserfs
-
-	* bootloader.pm: use run_or_die
-
-	* run_program.pm (run_or_die, rooted_or_die): created
-
-	* install_steps_interactive.pm: cleanup
-
-	* install_any.pm (getHds): handle LVMs. $o->{lvms} contain them
-	(setPackages): ask for installation of package lvm when needed
-	(suggest_mount_points, find_root_parts): take $fstab as arg instead of
-	$hds
-
-	* install2.pm: small fixes for LVM
-	(formatPartitions): call vgscan if needed when / is mounted
-
-	* devices.pm (make): better caller in error
-
-	* share/list: add progs for LVM handling
-
-	* install_interactive.pm: small fixes for LVM
-
-	* diskdrake.pm: small fixes for LVM
-	  - addition of drive to notebook cleaned
-	  - various clean-up
-	  - handling of LVMs
-
-	* standalone/diskdrake: small fixes for LVM
-	small adaptation
-
-	* lvm.pm: small fixes for LVM
-	creation
-
-	* partition_table.pm: add isLVMBased
-
-2001/03/02  stew   <sbenedict@mandrakesoft.com>
-
-	* commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC
-
-	* install_steps.pm - no bootfloppy, added yaboot.conf - PPC
-
-	* install_interactive.pm - pdisk vs. fdisk - PPC
-
-	* bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz
-
-2001/03/02  stew   <sbenedict@mandrakesoft.com>
-
-	* c/smp.c -stanza for PPC
-	
-	* detect_devices.pm - added code for MO devices
-
-	* help.pm - help information for yaboot - PPC
-
-	* partition_table.pm - PPC mods
-
-	* partition_table_mac.pm - PPC mods 
-
-	* modules.pm - PPC mods - parallel port not used
-
-	* diskdrake.pm - PPC mods - display like pdisk
-
-	* install2.pm - PPC mod - no bootdisk
-
-	* fs.pm - bootstrap partition - PPC
-	
-2001/02/27  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: pop up a dialog to quit X when accepting
-	configuration
-
-2001/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm (@MBR_signatures): add yet another grub signature
-
-	* devices.pm (entry): add fd0H1440 and fd1H1440
-
-	* bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be
-	created
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm,
-	pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy
-
-	* Makefile: typo
-	new pixmap policy
-
-	* bootlook.pm: typo
-	new pixmap policy
-	need to be merged with bootloader
-
-	* standalone/draknet: reincluded Gtk + init Gtk
-	thiskind -> thiskind_backend
-	new pixmap policy
-
-	* standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po,
-	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers
-	script to produce a correct pot file
-	Updated Estonian and Walloon files
-
-	* bootlook.pm: changed I_() to _() so xgettext cna find the translatable
-	strings
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakgw: pixelization
-
-	* install_steps.pm: remove unneeded "use install_interactive"
-
-	* install_steps_gtk.pm (copy_advertising): fix changing for
-	advertising_images
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: should correct bad resolv.conf when swithcinf in
-	standalone embedded mode. Not Certified
-	fixed standalone edition
-	corrected wizard mode.
-
-	* Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap
-	policy
-
-	* standalone/draknet: new pixmap policy
-	fixed standalone edition
-
-	* bootlook.pm: need to be merged with bootloader
-
-	* interactive_gtk.pm: if wizard, show the button
-
-	* standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (if_): fix for use in scalar context
-
-	* install_steps_interactive.pm (summary): translate mouse description
-
-	* install_steps.pm: remove unneeded "use install_interactive"
-
-	* install_steps_gtk.pm (copy_advertising): fix changing for
-	advertising_images
-
-2001/02/26  warly
-
-	* share/compssUsers, share/rpmsrate: remove some packages
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: if wizard, show the button
-
-	* netconnect.pm: corrected wizard mode.
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (if_): fix for use in scalar context
-
-	* install_steps_interactive.pm (summary): translate mouse description
-
-2001/02/25  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo.
-
-	* netconnect.pm: profile handling.
-	profile handling
-	corrected wizard.
-
-	* standalone/draknet: profile handling.
-	profile handling
-
-	* install_steps_interactive.pm: updated
-
-2001/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the load_deps before all the loadO's
-
-	* install_any.pm (g_auto_install): have formatMountPartitions graphical if
-	$graphical
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1"
-	for replay
-
-	* interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists
-	center the chosen value
-
-2001/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install2.pm: move writing to config files from
-	install2::selectKeyboard to install_steps
-
-	* share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in
-	the CVS since the current cooker version is too recent
-
-	* commands.pm (more): handle 'q' to quit
-
-2001/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile (stuff): fix the fix's fix :'-(
-
-	* detect_devices.pm (pci_probe): fix to clean the log
-
-	* install_steps_interactive.pm (setRootPassword): NIS server must be
-	editable
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
-	fully automated install'.
-
-	* install_steps_auto_install.pm (@graphical_steps): specify which step
-	should be interactive
-
-	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-
-	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
-	(configurePrinter): if_'ization
-
-	* install_steps_interactive.pm (exitInstall): ask wether Replay or
-	Automated
-	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
-	automated install'.
-	(summary): nicer mouse name
-
-2001/02/23  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard
-	layout, no use gtk in draknet, minor bugfixes
-
-2001/02/23  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added accessor the rpmsrate data of packages.
-	avoid rebuilding the database for oem, rpm db is assumed to be fine.
-
-	* rescue/make_rescue_img: removed kernel_reread program.
-
-	* rescue/tree/etc/oem: removed server from selection.
-	added mutli CD support to OEM (NFS/DVD transparent)
-	fixed selection of package now select much more than before.
-	fixed root partition size set to the minimum.
-
-2001/02/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: move xterm to SYSTEM
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if
-	needed
-
-	* install_steps_auto_install.pm (@graphical_steps): specify which step
-	should be interactive
-
-	* c/stuff.xs.pm: hack for macroporcessing in term.h
-	use C_DRAKX
-
-	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
-	(configurePrinter): if_'ization
-
-	* share/rpmsrate: add packages installed on demand by DrakX. they are
-	specifically flagged
-	or flagged 'INSTALL'
-
-	* perl2fcalls: handling of ``package''->import(``what to import'')
-
-	* interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest
-
-	* Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0
-
-	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
-	fully automated install'.
-
-	* c/Makefile.PL: use C_DRAKX
-
-	* pkgs.pm (setSelectedFromCompssList): fix the fix
-
-	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-	add setting C_DRAKX to 1 by default
-
-	* install_steps_interactive.pm (exitInstall): ask wether Replay or
-	Automated
-	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
-	automated install'.
-	(summary): nicer mouse name
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): double clicking on list
-	means 'Ok'
-
-	* pkgs.pm (setSelectedFromCompssList): fix sillyness
-
-2001/02/22  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corected infinite loop
-
-2001/02/22  François Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: minor cleanup to edit partition size more easily.
-	brand new version written in perl, support repartitionning on the fly of
-	the
-	hard disk and resize of already present FAT partition.
-
-	* rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit
-	more cleaner (added dependancy).
-	added missing file for rescue to enable new oem install.
-
-2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-modutils/include/elf_hppa64.h,
-	mdk-stage1/insmod-modutils/util/alias.h,
-	mdk-stage1/insmod-modutils/util/xstrcat.c,
-	mdk-stage1/insmod-modutils/util/gzfiles.c,
-	mdk-stage1/insmod-modutils/include/elf_arm.h,
-	mdk-stage1/insmod-modutils/util/sys_qm.c,
-	mdk-stage1/insmod-modutils/util/modstat.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc.c,
-	mdk-stage1/insmod-modutils/include/elf_m68k.h,
-	mdk-stage1/insmod-modutils/Makefile,
-	mdk-stage1/insmod-modutils/util/xstrdup.c,
-	mdk-stage1/insmod-modutils/obj/obj_arm.c,
-	mdk-stage1/insmod-modutils/obj/obj_m68k.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc64.h,
-	mdk-stage1/insmod-modutils/util/sys_dm.c,
-	mdk-stage1/insmod-modutils/include/elf_s390.h,
-	mdk-stage1/insmod-modutils/obj/obj_s390.c,
-	mdk-stage1/insmod-modutils/util/xmalloc.c,
-	mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h,
-	mdk-stage1/insmod-modutils/util/xftw.c,
-	mdk-stage1/insmod-modutils/include/elf_i386.h,
-	mdk-stage1/insmod-modutils/util/sys_gks.c,
-	mdk-stage1/insmod-modutils/util/snap_shot.c,
-	mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c,
-	mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h,
-	mdk-stage1/insmod-modutils/include/elf_ppc.h,
-	mdk-stage1/insmod-modutils/obj/obj_reloc.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc.h,
-	mdk-stage1/insmod-modutils/util/sys_nim.c,
-	mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile,
-	mdk-stage1/insmod-modutils/include/elf_hppa.h,
-	mdk-stage1/insmod-busybox/insmod.c,
-	mdk-stage1/insmod-modutils/util/meta_expand.c,
-	mdk-stage1/insmod-modutils/util/arch64.c,
-	mdk-stage1/insmod-modutils/obj/obj_load.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa.c,
-	mdk-stage1/insmod-busybox/insmod.h,
-	mdk-stage1/insmod-modutils/include/elf_ia64.h,
-	mdk-stage1/insmod-modutils/obj/obj_ia64.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
-	mdk-stage1/insmod-modutils/include/elf_mips.h,
-	mdk-stage1/insmod-modutils/include/module.h,
-	mdk-stage1/insmod-modutils/obj/obj_mips.c,
-	mdk-stage1/insmod-modutils/util/sys_cm.c,
-	mdk-stage1/insmod-modutils/obj/obj_alpha.c,
-	mdk-stage1/insmod-modutils/include/kerneld.h,
-	mdk-stage1/insmod-modutils/util/xrealloc.c,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/insmod-frontend.c,
-	mdk-stage1/insmod-modutils/obj/obj_common.c,
-	mdk-stage1/insmod-modutils/include/modstat.h,
-	mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/insmod-modutils/include/config.h,
-	mdk-stage1/insmod-modutils/util/logger.c,
-	mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
-	mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h,
-	mdk-stage1/insmod-modutils/util/config.c,
-	mdk-stage1/insmod-modutils/include/version.h,
-	mdk-stage1/insmod-modutils/include/kallsyms.h,
-	mdk-stage1/insmod-modutils/include/elf_alpha.h,
-	mdk-stage1/insmod-modutils/util/sys_oim.c,
-	mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
-	not
-	over existing /etc/fstab. Fix some stupid stuff
-
-	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
-	* install2.pm (main): don't set a special $remote_path PATH for
-	postInstallNonRooted
-	(otherwise install's modprobe is not used, and you can't "modprobe
-	vfat",
-	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
-	found.
-
-	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
-	non-scrolled
-
-2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c,
-	mdk-stage1/init-libc-headers.h,
-	mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile,
-	mdk-stage1/init.c, mdk-stage1/minilibc.h,
-	mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/include/signal.h: have "init" compiled against
-	dietlibc (rather than glibc) on non-Intel arch's
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: $graphical is now a module variable. Can
-	be changed from everywhere
-
-	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
-	not
-	over existing /etc/fstab. Fix some stupid stuff
-
-	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
-	* install2.pm (main): don't set a special $remote_path PATH for
-	postInstallNonRooted
-	(otherwise install's modprobe is not used, and you can't "modprobe
-	vfat",
-	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
-	found.
-
-	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
-	non-scrolled
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): fix setting
-	type to 'list' in
-	case of format. should be only set if type is unset
-	(ask_from_entries_refH_powered_normalize): if list+format then type is
-	'list', combo not accepted (hacky?)
-
-	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
-	call create_okcancel
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): if list+format
-	then type is
-	'list', combo not accepted (hacky?)
-
-	* install_steps_auto_install.pm: $graphical is now a module variable. Can
-	be changed from everywhere
-
-	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
-	call create_okcancel
-
-2001/02/21  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, netconnect.pm: netconnect recode, wizard compatible.
-	network.pm modified for wizard. Still need work for ask_yesorno,
-	ask_okcancel. +debugging of course
-
-	* standalone/draknet: updated (don't remember what)
-
-2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/Makefile,
-	mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c,
-	mdk-stage1/minilibc.h, mdk-stage1/minilibc.c,
-	mdk-stage1/init-libc-headers.h: 
-	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
-	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
-	  - cleanup of "init"
-
-	* mdk-stage1/init.c: 
-	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
-	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
-	  - cleanup of "init"
-	fix up syslog logging stuff
-
-2001/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (generateAutoInstFloppy): removed
-
-	* install_any.pm (g_auto_install): use selected_leaves for
-	default_packages to reduce the
-	list of packages (aka cleanup auto_inst.cfg)
-	(g_default_packages): created
-
-	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
-	and g_default_packages calls in
-	advanced
-
-	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
-	* pkgs.pm (selected_leaves): created
-
-	* install2.pm (main): do postInstallNonRooted before postInstall (so that
-	'modprobe
-	vfat' can be done in postInstallNonRooted and used in postInstall)
-	  - move the loadO of patch/defcfg after loading modules.dep
-	  - generateAutoInstFloppy is no more a step
-	  - removed use Data::Dumper
-
-2001/02/21  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Add iputils to SYSTEM.
-
-2001/02/21  dam's  <damien@mandrakesoft.com>
-
-	* docs/wizard.doc: putain de doc de merde pout petite qui est trop débile
-
-	* interactive.pm, my_gtk.pm: corrected wizard mode.
-
-2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/TECH-INFOS: sync doc with disk automatic installs
-
-	* mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk
-	installs
-
-2001/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (generateAutoInstFloppy): removed
-
-	* install_any.pm (g_auto_install): use selected_leaves for
-	default_packages to reduce the
-	list of packages (aka cleanup auto_inst.cfg)
-	(g_default_packages): created
-
-	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
-	and g_default_packages calls in
-	advanced
-
-	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
-	* pkgs.pm (selected_leaves): created
-
-	* install2.pm (main): do postInstallNonRooted before postInstall (so that
-	'modprobe
-	vfat' can be done in postInstallNonRooted and used in postInstall)
-	  - move the loadO of patch/defcfg after loading modules.dep
-	  - generateAutoInstFloppy is no more a step
-	  - removed use Data::Dumper
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* printerdrake.pm: fix typo
-
-	* install_steps.pm, install_steps_gtk.pm, install_any.pm: better
-	advertising support
-
-2001/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP
-	installs, make use of Content-Length when available, to display
-	progressbar
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: various
-	  - pcmcia_config.patch now in tools (no more in install which is
-	removed)
-	  - copy xpm's (until step icons work with png's)
-	  - transform group icons in pngs
-
-	* modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various
-
-	* tools/pcmcia_config.patch: pcmcia_config.patch now here
-
-	* printerdrake.pm: fix typo
-
-	* install_any.pm, install_steps.pm, install_steps_gtk.pm: better
-	advertising support
-
-2001/02/20  warly
-
-	* share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate
-
-2001/02/20  François Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE
-	env variable to choose rpmrc file for rpmlib used
-	by DrakX, neccessary for live update from a 7.2 or older.
-	Check that if something goes wrong with rebuilddb, avoid removing
-	old rpm-3 db files.
-	Make sure live_install can start from top directory too.
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: various
-	  - pcmcia_config.patch now in tools (no more in install which is
-	removed)
-	  - copy xpm's (until step icons work with png's)
-	  - transform group icons in pngs
-
-	* modules.pm, class_discard.pm: various
-
-	* tools/pcmcia_config.patch: pcmcia_config.patch now here
-
-	* my_gtk.pm, Xconfigurator.pm: various
-	major move. now ask_from_list returns false when canceled (it doesn't
-	die 'ask_from_list canceled' anymore)
-
-	* interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm,
-	netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm,
-	any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list
-	returns false when canceled (it doesn't die 'ask_from_list canceled'
-	anymore)
-
-2001/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: try to print errno's stuff when symlink to
-	/tmp/stage2 failed
-
-	* mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4
-
-2001/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Estonian file
-
-2001/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on
-	cancel
-
-	* my_gtk.pm (create_packtable): don't use attach_raw anymore (was a
-	sillyme)
-
-2001/02/18  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: typo
-	make fbastok happy about button placement.
-	little improvements.
-
-2001/02/16  dam's  <damien@mandrakesoft.com>
-
-	* install_gtk.pm: corrected xpm mask
-
-	* network.pm: wireless eth support corrected.
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
-	share/step-orange-on.xpm, share/step-green-on.xpm,
-	share/step-red-click.xpm: re added these xpm files against display mask
-	pb.
-
-2001/02/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: better ansi colors
-
-	* mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers
-
-	* mdk-stage1/stdio-frontend.c: display more nicely when there is a long
-	list to choose from (1, 2 or 4 columns)
-
-2001/02/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc
-
-2001/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix i_images
-
-	* fsedit.pm (suggestions_mntpoint): fix
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix i_images
-	(installPackages): traktolpilization and advertising
-
-	* Makefile (get_needed_files): copy png files instead of xpm's
-
-	* fsedit.pm (suggestions_mntpoint): fix
-
-	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
-	* share/list: add GdkImlib stuff
-
-	* perl2fcalls: add Gtk::Gdk::ImlibImage
-
-	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
-	if it exists
-
-2001/02/15  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm,
-	install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to
-	test the faces2xpm stuff.
-
-	* share/step-orange-click.xpm, share/rpm-selected.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm,
-	share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm,
-	share/step-red-click.xpm, share/step-green-on.xpm,
-	share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm,
-	share/reload.xpm, share/rpm-semiselected.xpm,
-	share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm,
-	share/step-red-on.xpm: removed, png are used instead.
-
-	* standalone/draknet: updated internet and added eth conf
-
-	* share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead.
-	added png images
-
-	* share/step-red.png, share/step-orange.png, share/reload.png,
-	share/logo-mandrake.png, share/rpm-semiselected.png,
-	share/logo-mandrake-Desktop.png, share/rpm-installed.png,
-	share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png,
-	share/rpm-selected.png, share/step-orange-click.png,
-	share/step-green-click.png, share/step-green.png, share/rpm-base.png,
-	share/logo-mandrake2.png, share/ftin.png, share/help.png,
-	share/step-orange-on.png, share/step-green-on.png, share/ftout.png,
-	share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc,
-	share/rpm-unselected.png: added png images
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile (get_needed_files): copy png files instead of xpm's
-
-	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
-	if it exists
-	(selectKeyboard): give clicked as parameter
-
-	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
-	* fsedit.pm (suggestions_mntpoint): fix typo
-
-	* share/list: add GdkImlib stuff
-
-	* perl2fcalls: add Gtk::Gdk::ImlibImage
-
-	* install_steps_interactive.pm (summary): better message for i18n
-
-	* install_steps_gtk.pm (installPackages): traktolpilization and
-	advertising
-
-2001/02/14  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, standalone/draknet: wireless updated
-
-	* share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin
-	theme :)
-
-2001/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): add user in group usb
-
-2001/02/14  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: valentin theme :)
-	added drawing theme section
-
-	* network.pm: wireless updated
-	updated wireless eth support
-
-	* standalone/draknet: wireless updated
-
-	* share/help.xpm, share/logo-mandrake.xpm: valentin theme :)
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: network con initiated in draknet.
-	netconnect improvement.
-	typo
-
-	* network.pm: typo
-	corrected domainname setting
-
-	* standalone/draknet: network con initiated in draknet.
-	netconnect improvement.
-
-2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/frontend.h, mdk-stage1/network.h,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c,
-	mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c,
-	mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff
-
-	* mdk-stage1/modules.c: ask for modules parameters everytime in expert
-	mode, to avoid wrong autodetections in certain cases
-	  - better log of nfs mount errors
-	  - don't insmod modules already present (important for bzip2 slowness)
-
-	* mdk-stage1/cdrom.c: better error msg thx to mcdtg
-
-	* mdk-stage1/mount.c, mdk-stage1/nfsmount.c: 
-	  - better log of nfs mount errors
-	  - don't insmod modules already present (important for bzip2 slowness)
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue
-	better console messages at startup
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: profile handling updated
-
-	* network.pm: typo
-	corrected domainname setting
-
-	* netconnect.pm: finished load_conf
-
-2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/make_rescue_img, rescue/list: include libs for hostname resolving
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at
-	startup
-
-	* mdk-stage1/tools.c: 
-	  - save /etc/resolv.conf for rescue
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
-	non-expert
-
-	* any.pm: md5 now done via crypt
-
-	* install_steps.pm (exitInstall): catch exception of output report.bug
-	(for gc)
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
-	non-expert
-
-	* tools/cvslog2changelog.pl: fix for gc & fpons
-	fix for fredl broken CVS
-
-	* any.pm: md5 now done via crypt
-
-	* install_steps.pm (exitInstall): catch exception of output report.bug
-	(for gc)
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* network.pm: experimental wireless eth support. Not tested
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: fix for gc & fpons
-	fix for fredl broken CVS
-
-	* c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can
-	be done via crypt of glibc, so remove all this
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* any.pm: merging difference
-
-	* netconnect.pm: corrected profile handling
-
-	* network.pm: experimental wireless eth support. Not tested
-
-2001/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
-	docs, rescue, tools)
-
-2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: do not close un unbound socket!!
-
-	* c/stuff.xs.pm: close socket everytime in hasNetDevice
-
-	* mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future
-	potential confusions
-
-	* modules.pm: re include some network modules
-
-2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list: fix vi trouble
-	  - add lspci, lspcidrake, vim-minimal
-	  - better /etc/issue
-	  - better PS1
-	  - write embryonic tool (installation of detected drivers according to
-	pci cards)
-
-	* rescue/aliases, rescue/tree/etc/issue: fix vi trouble
-
-	* rescue/list.i386, rescue/make_rescue_img, rescue/drvinst: 
-	  - add lspci, lspcidrake, vim-minimal
-	  - better /etc/issue
-	  - better PS1
-	  - write embryonic tool (installation of detected drivers according to
-	pci cards)
-
-2001/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/drvinst: pixelization
-
-	* docs/README: fix doc about Mandrake/base/compss
-
-	* install_steps_gtk.pm (choosePackagesTree): non first choice packages are
-	in "Other".
-
-	* install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate
-	partitions choice modified. diskdrake in expert asks what kind
-	of auto_allocation is wanted, others choose 'simple' in
-	%fsedit::suggestions
-
-	* install2.pm: auto_allocate partitions choice modified. diskdrake in
-	expert asks what kind
-	of auto_allocation is wanted, others choose 'simple' in
-	%fsedit::suggestions
-	(main): gc has done it again! /tmp/conf.modules is now
-	/etc/modules.conf,
-	so load both to keep compatibility.
-
-	* my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list)
-
-	* interactive_gtk.pm (ask_from_entries_refW): use
-	$common->{advanced_label}
-	(create_ctree): add keyboard shortcuts
-	(create_clist): moveto only if row_is_visible
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label
-	defaults to
-	_("Advanced")
-
-	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
-	docs, rescue, tools)
-
-	* install_steps_interactive.pm (configurePrinter): cleanup,
-	pkg_install_if_requires_satisfied('xpp',
-	'kups') only if a printer is configured (for the case when _("Would you
-	like to configure a printer?") is answered no)
-
-	* rescue/tree/etc/rc.sysinit: add floppy module for 2.4
-
-2001/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
-	* install_any.pm: add preConfigureTimezone
-	add step summary. remove steps configureTimezone and configurePrinter
-
-	* install_interactive.pm: cleanup
-
-	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
-	  - lang2keyboards handle keyboard percentages
-	  - xmodmaps now named keyboards
-
-	* install_steps_interactive.pm: add step summary. remove steps
-	configureTimezone and configurePrinter, modify selectKeyboard
-
-	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
-	steps configureTimezone and configurePrinter
-
-	* netconnect.pm: corrected back $install call
-
-2001/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
-	  - lang2keyboards handle keyboard percentages
-	  - xmodmaps now named keyboards
-
-	* install_steps_interactive.pm: add step summary. remove steps
-	configureTimezone and configurePrinter, modify selectKeyboard
-
-	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
-	* install_any.pm: add preConfigureTimezone
-	add step summary. remove steps configureTimezone and configurePrinter
-
-	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
-	steps configureTimezone and configurePrinter
-
-	* install_interactive.pm: cleanup
-
-	* netconnect.pm: corrected back $install call
-
-2001/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm,
-	timezone.pm: configureTimezone doesn't take parameter
-	/etc/sysconfig/clock
-
-2001/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button
-	handling, quite weird behaviour though cuz of newt sillyness
-
-	* install2.pm: configureTimezone doesn't take parameter
-	/etc/sysconfig/clock
-	(main): have compatibility with old stage1 (rhimage -> image)
-	(formatPartitions):
-	s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans|
-	as it should now be (see lang.pm 1.143)
-
-	* install_steps.pm, install_steps_interactive.pm, timezone.pm:
-	configureTimezone doesn't take parameter /etc/sysconfig/clock
-
-2001/02/09  siegel
-
-	* share/po/de.po: new german version
-
-2001/02/08  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakgw: implemented or updated embedded mode
-	added embedded and (ugly) wizard mode.
-
-	* standalone/printerdrake, standalone/mousedrake, standalone/diskdrake,
-	standalone/keyboarddrake: implemented or updated embedded mode
-
-	* standalone/draknet: implemented or updated embedded mode
-	added embedded mode
-
-	* standalone/XFdrake: implemented or updated embedded mode
-	corrected compilation bug.
-
-	* standalone/drakboot: implemented or updated embedded mode
-	updated embedded mode. Should work, not tested in real world
-
-	* netconnect.pm: removed testing wizard instruction
-
-2001/02/08  François Pons  <fpons@mandrakesoft.com>
-
-	* ftp.pm: fixed wrong URLPREFIX formation if no user given.
-
-	* standalone/XFdrake: fix the previous changelog wich was wrong (bad
-	spelling),
-	added a char in comment to allow a new release (thanks to pixel :-)
-	make sure SHARE_PATH is set.
-	fixed SHARE_PATH to make sure it is setted.
-
-	* Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer
-	XF3 for SiS card.
-
-	* pkgs.pm: fixed problem for updating hdlist after going back to partition
-	step.
-
-2001/02/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c:
-	better memory detection (from wonderful drakx)
-
-2001/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Norwegian file
-
-2001/02/08  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (availableRamMB): cleanup
-
-	* standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in
-	standalone
-
-2001/02/07  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed unknown package ARRAY... and locales selection
-	according to langs.
-
-	* modules.pm: fixed module name without text for SCSI configuration
-	dialog, add log.
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c,
-	mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c,
-	mdk-stage1/network.c: 
-	  - use description of network cards when you have to select between
-	interfaces; has accuracy even in the case of multiple interface for a
-	given kernel module
-	  - write down a small "shell" to change parameters on the fly (needs
-	compile option SPAWN_INTERACTIVE)
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): better fix for getting
-	max install size.
-	(choosePackages): call setSelectedFromCompssList with empty
-	compssUsersChoice meaning max
-
-	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed unknown package ARRAY... and locales selection
-	according to langs.
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): better fix for getting
-	max install size.
-	(choosePackages): call setSelectedFromCompssList with empty
-	compssUsersChoice meaning max
-
-	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Add usbd to SYSTEM.
-
-2001/02/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: updated wizard mode, intro and other stuff
-
-	* interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode
-
-	* share/logo-mandrake.xpm: new logo
-
-2001/02/07  François Pons  <fpons@mandrakesoft.com>
-
-	* http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too)
-	caused by forked DrakX
-	with latent ftp connection.
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  siegel
-
-	* share/po/de.po: new german version
-
-2001/02/06  François Pons  <fpons@mandrakesoft.com>
-
-	* ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid
-	opening
-	and closing connection too fast for each transaction). There seems
-	to be some problem for retrieving twice a package, this cause huge pause
-	between each transaction, the best is to avoid them so ?
-
-2001/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c,
-	mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c,
-	mdk-stage1/modules.c, mdk-stage1/disk.c: 
-	  - slighty change the message when exiting successfully from install,
-	to not mess with abnormal termination
-	  - get back dialog for hostname and domain in case of unable to guess
-	domain
-	  - try to resolve DNS if self-ip can't resolve, to guess domain
-	  - remember entries so that when there is a problem you don't have to
-	re-enter everything (ncurses sucking stuff in case of stdio-frontend..)
-	  - use larger buffer for list_directory since in /dev there can be
-	*many* files
-
-2001/02/05  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles.
-
-	* standalone/draknet: added infos recovering.
-
-	* netconnect.pm: added load_conf() to recover saved infos from conffile.
-
-2001/02/05  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: removed abusive white char.
-	updated to use urpmi new format (change fakemedium to better label)
-	fixed frame buffer usage if not enabled (installation of Aurora)
-	clean up and remove unused code.
-
-	* ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore.
-
-	* pkgs.pm: updated to use urpmi new format (change fakemedium to better
-	label)
-
-	* Xconfigurator.pm: Removed Device3Dfx as it is no more.
-
-	* install_steps.pm: fixed frame buffer usage if not enabled (installation
-	of Aurora)
-	clean up and remove unused code.
-
-2001/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/list: updated list of gconv modules
-
-2001/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (head_tail): fix usage
-
-	* interactive_gtk.pm (create_ctree): node_moveto done only if
-	node_is_visible is not full
-
-2001/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with
-	file-not-found in args
-
-2001/02/04  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_newt.pm: fix adaptation to the terminal size, should now
-	work in 80x25
-
-	* Xconfigurator.pm (monitorConfiguration): better handling of auto_install
-
-	* install_steps_interactive.pm (choosePackages): don't call
-	chooseSizeToInstall even with experts
-
-	* install_steps_gtk.pm (charsetChanged): re-create steps window
-
-2001/02/03  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm, standalone/draknet, netconnect.pm: corrected module.conf
-	update, net conf saving, and no wizard by default.
-
-2001/02/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
-	auto_installs
-
-	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
-	the right charset the windows
-
-	* install_steps_interactive.pm (selectLanguage): call charsetChanged
-
-	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
-	move ftp to SYSTEM so that it is installed
-
-	* Makefile: install cardmgr
-
-	* modules.pm (configure_pcmcia): cleanup
-
-2001/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
-	auto_installs
-
-	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
-	the right charset the windows
-
-	* install_steps_interactive.pm (selectLanguage): call charsetChanged
-
-	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
-	move ftp to SYSTEM so that it is installed
-
-	* Makefile: install cardmgr
-
-	* modules.pm (configure_pcmcia): cleanup
-
-2001/02/02  dam's  <damien@mandrakesoft.com>
-
-	* share/wizard.rc: added rc file for wizard mode
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
-	fails and
-	auto_install and not provided any info about the monitor
-
-	* my_gtk.pm (gtkcreate_xpm): error handling with error message
-
-	* share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP
-
-	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
-	/etc/sysconfig/i18n
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-	* install_any.pm (setPackages): in auto_installs, default to all groups
-	chosen, unless
-	compssUsersChoice exist. Won't change anything unless compssListLevel is
-	used of course
-
-	* Xconfigurator_consts.pm: add low_default_monitor for default of
-	auto_installs
-
-	* interactive_gtk.pm (ask_from_entries_refW): use gtkxpm
-
-	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
-	diskdrake.pm: using the new formatXiB
-
-	* detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to
-	the fact that kernel
-	2.4 uses /proc/driver/array instead of /proc/array. Also adapted the
-	regexp now that ida/c0d0p? is no more at the beginning of the line.
-	(get): cleanup, remove hasIDE hasSCSI...
-
-	* common.pm (formatXiB): created, format a number in human readable format
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-2001/02/02  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm,
-	standalone/diskdrake: recoded wizard mode
-	corrected some stuff.
-	trying not to break draknet for cooker snapshot
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
-	fails and
-	auto_install and not provided any info about the monitor
-
-	* install_any.pm (setPackages): in auto_installs, default to all groups
-	chosen, unless
-	compssUsersChoice exist. Won't change anything unless compssListLevel is
-	used of course
-
-	* share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i
-	chose was glibc-2.1 :-(
-	this one en_US and seems all right!
-
-	* Xconfigurator_consts.pm: add low_default_monitor for default of
-	auto_installs
-
-	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
-	diskdrake.pm: using the new formatXiB
-
-	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
-	/etc/sysconfig/i18n
-
-	* common.pm (formatXiB): created, format a number in human readable format
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-2001/02/01  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: new draknet snapshot. Still unuseable
-
-	* interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in
-	install.
-
-2001/01/31  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corected translation and conflict.
-
-2001/01/31  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: added missing die if modprobe failed on live upgrade.
-
-	* pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm
-	file
-	if everything has been successfull.
-
-	* install_steps.pm: changed to clean selection for non expert as used for
-	group selection
-	because it is not cleaned, need better solution TODO.
-
-2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES
-	BEFORE COLON (:);
-	and it is "Profile" and not "Profil")
-	CV:
-	----------------------------------------------------------------------
-
-2001/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackagesTree): created, simple
-	ask_many_from_list to choose
-	individual packages
-	(choosePackages): log for debug
-	(choosePackages): don't ask to install in beginner. Max is chosen
-	(setRootPassword): help not based on installClass being server or not
-	(selectInstallClass): remove installClass choice (was
-	normal/devel/server)
-	(chooseGroups): fix for individual package selection flag
-
-	* netconnect.pm (get_net_device): more cleanup syntax
-	(get_net_device): cleanup syntax
-
-	* install_steps.pm (selectLanguage): warning for debug
-	(miscellaneousBefore): don't use installClass to decide to use
-	supermount
-	or not. Choice is done on $::corporate. Can't say "no supermount in
-	server
-	installs" anymore
-	(selectInstallClass): emptied
-	(setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
-	* install_any.pm (g_auto_install): installClass removed
-	(setPackages): do not preselect compssUsers entries
-
-	* install2.pm (main): don't set installClass=normal meta_class desktop
-	(deprecated)
-	(miscellaneous): TYPE= removed (was installClass)
-	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
-	ask in a set of possibilities
-	($o): replace fclass by fbeginner and fexpert
-	($o): default security level to 2 since it can't be based on
-	installClass (deprecated)
-
-	* install_steps_gtk.pm: restore window size for time being
-
-	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
-	* Xconfigurator.pm (main): better error message for auto_install failing
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
-	drakx. Still
-	need finding the guilty
-
-2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: more kbd corrections
-	fixed soem keybopard values
-
-2001/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackagesTree): created, simple
-	ask_many_from_list to choose
-	individual packages
-	(choosePackages): log for debug
-	(choosePackages): don't ask to install in beginner. Max is chosen
-	(setRootPassword): help not based on installClass being server or not
-	(selectInstallClass): remove installClass choice (was
-	normal/devel/server)
-	(chooseGroups): fix for individual package selection flag
-
-	* install_steps.pm (selectLanguage): warning for debug
-	(miscellaneousBefore): don't use installClass to decide to use
-	supermount
-	or not. Choice is done on $::corporate. Can't say "no supermount in
-	server
-	installs" anymore
-	(selectInstallClass): emptied
-	(setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
-	* install_any.pm (g_auto_install): installClass removed
-	(setPackages): do not preselect compssUsers entries
-
-	* install2.pm (main): don't set installClass=normal meta_class desktop
-	(deprecated)
-	(miscellaneous): TYPE= removed (was installClass)
-	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
-	ask in a set of possibilities
-	($o): replace fclass by fbeginner and fexpert
-	($o): default security level to 2 since it can't be based on
-	installClass (deprecated)
-
-	* install_steps_gtk.pm: restore window size for time being
-
-	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
-	* Xconfigurator.pm (main): better error message for auto_install failing
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
-	drakx. Still
-	need finding the guilty
-
-2001/01/30  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: new draknet. unstable
-
-	* netconnect.pm: updated
-	debugged network card configuration after pixelisation.
-
-2001/01/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from
-	trying to set progressbar to more than 100% (rescue is more compressed
-	than drakx)
-
-	* share/rpmsrate: add ldetect to config stuff I want to have on all
-	installs (lspcidrake)
-
-2001/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, netconnect.pm, install_interactive.pm:
-	adapt format functions given to ask_from_listf. $_ is no more set
-
-	* mouse.pm (detect): replace commands::modprobe by modules::load as it
-	should (or??)
-
-	* perl2etags: adapt to new etags (emacs 21) format
-
-	* raid.pm (make): replace commands::modprobe by modules::load as it should
-	(or??)
-
-	* perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his
-	regexps
-
-	* share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number
-	separator instead of ".".
-	The sheer result is:
-	"0.6" * 10  gives 0
-	"0,6" * 10  gives 6
-	
-	So i have overwritten misc/LC_NUMERIC with
-	/usr/share/locale/en/LC_NUMERIC and
-	it works nicely now :)
-
-2001/01/29  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakboot: corrected typo
-
-2001/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - deprecate "hdreiser.img" since we have room for "reiserfs.o" in
-	"hd.img"
-	  - following deprecation of "other.img", reintegrate big modules in
-	relevant boot disks
-
-2001/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/po/et.po: updated Estonian file
-
-2001/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain
-	more than one ida/c0d0p*
-
-2001/01/28  dam's  <damien@mandrakesoft.com>
-
-	* share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  siegel
-
-	* share/po/de.po: new german version
-
-2001/01/26  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: updated embedded mode
-
-	* standalone/drakboot: added embedded mode
-
-2001/01/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile
-	bzlib
-
-	* mdk-stage1/stage1.c: restore passing of pcmcia info to stage2
-
-	* mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c,
-	mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c,
-	mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c,
-	mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c,
-	mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: 
-	  - use bzlib instead of zlib to reduce overall size
-	  - take home my own bzlib code to (1) reduce code size with good
-	compile options (2) make it compile and link against dietlibc
-
-	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h,
-	mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h,
-	mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/26  siegel
-
-	* share/po/de.po: .
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: disable steps 'packages choice', 'configure X', and
-	'configure' 'printer'
-
-	* install_steps_interactive.pm: don't oblige user addition
-
-	* network.pm: display ethernet module
-
-	* netconnect.pm: network informations filled into
-	$prefix/var/lib/naat/configuration
-
-2001/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh ->
-	/usr/bin/sh for stage2
-
-	* mdk-stage1/probing.h: better tightness of probing stuff
-
-	* mdk-stage1/probing.c: better tightness of probing stuff
-	print warning message when insmod of PCI-detected device fails
-
-	* mdk-stage1/stage1.c: 
-	  - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives
-	  - remove fat/vfat modules from some boot floppies now that we don't
-	need it anymore
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of
-	tulip network cards, kernel-2.4 has strange way to classify some of its
-	net modules..
-
-2001/01/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Waw, italian translator is very fast :)
-	updated Indonesian and Italian fiels
-
-	* share/po/id.po: updated Indonesian and Italian fiels
-
-	* share/locales.tar.bz2: added iso9 locale definitions
-
-	* lang.pm: fixed LANGUAGE for mk locale
-
-2001/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (spawnShell): fix error message
-
-2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: 
-	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
-	  - remove unecessary device files
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
-	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
-	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
-	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
-	* install_steps.pm (afterInstallPackages): cleanup
-
-	* interactive.pm: better documentation of ask_from_entries_refH features
-	(entry)
-
-2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: 
-	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
-	  - remove unecessary device files
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
-	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
-	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
-	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
-	* install_steps.pm (afterInstallPackages): cleanup
-
-	* interactive.pm: better documentation of ask_from_entries_refH features
-	(entry)
-
-2001/01/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file
-
-2001/01/22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm, netconnect.pm: corrected slide bar, and
-	added network conf save in /root/networking.tmp
-
-2001/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: add automatic support in choice of NET device, in
-	case of multiple NET devices
-	consistent dot-terminated error messages, consistent no-dot log messages
-	re-put Netmask input per default (void entry -> automatic guess)
-
-	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent
-	dot-terminated error messages, consistent no-dot log messages
-
-2001/01/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated po files
-
-	* share/po/wa.po: updated po files
-	updated pot file
-
-	* install2.pm, lang.pm: fixed the places where console fonts and related
-	files are put under
-	/etc/sysconfig to the places really used by console-tools
-
-	* share/po/DrakX.pot: updated pot file
-
-	* share/po/hr.po: updated po files
-	updated Croatian file
-
-2001/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way,
-	read_rpmsrate
-	can be called standalone.
-
-	* network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm,
-	install_interactive.pm, install2.pm, partition_table.pm, install_any.pm,
-	any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is
-	deprecated, replaced by !$::expert
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
-	network/ftp installs
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
-	network/ftp installs
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: fix remaining perror's
-
-	* mdk-stage1/stage1.c: fix remaining perror's
-	  - better msg in fatal errors
-	  - do not include code to spawn a shell for releases
-
-2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectMouse): use ask_from_treelist_
-
-	* interactive.pm (ask_from_treelist_): created, split with the separator,
-	call translate on
-	words, then re-join.
-
-2001/01/19  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixes for CD not changeable.
-
-	* install_steps_interactive.pm: fixed unselect group and inoperant
-	individual package selection.
-	removed expert mode and install class.
-
-2001/01/18  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed obligation of relative large install, now
-	minimum is lesser.
-
-	* install_steps_gtk.pm: make sure no ratio above 1 can occur, still need
-	to see why as it happens
-	on install-abort-choices-install or
-	install-abort-choices-fs-format(none)-choices-install
-
-	* live_install: update live install to match /tmp/image instead of
-	/tmp/rhimage.
-
-2001/01/17  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, install_any.pm: fixes with /tmp/rhimage and
-	/tmp/image.
-
-	* pkgs.pm: update to use new header file format in hdlist (added arch) but
-	depslist has not it...
-
-	* install2.pm: fixes with /tmp/rhimage and /tmp/image
-
-2001/01/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated bulgarian file
-
-2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c: use strrchr instead of doing it by hand
-
-	* mdk-stage1/insmod-busybox/busybox.h,
-	mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c:
-	
-	  - replace remaining perror's with log_perror's
-	  - little code cleanup
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2,
-	mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c,
-	mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: 
-	  - add load of third party modules in Expert mode (PS rulz)
-
-2001/01/12  siegel
-
-	* share/po/de.po: updates
-
-2001/01/12  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed addUser for invocation of
-	any::ask_users.
-	fixed bad invocation of installation of X server.
-
-2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: add more memory carefulness with CDROM install
-	  - add wait_message for initializing of CDROM's (it can be long when
-	it's SCSI)
-	  - print CDROM drive names (model) in dialogs
-
-	* mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: 
-	  - fix behaviour with bad ISO images (DISK installs)
-	  - better dialogs for DISK installs
-
-2001/01/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: make lang list in format for tree-selector
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/disk.c: fix failing umount for DISK installs in some failing
-	loopback situations
-	act nicely when no partitions are found on some disk
-
-	* mdk-stage1/modules.h: polish generic blank.img situation (no modules
-	and/or modules.dep available)
-
-	* mdk-stage1/lomount.c: fix failing umount for DISK installs in some
-	failing loopback situations
-	better log messages
-	continue anyway when insmod'ing of modules fail (for blank.img)
-
-	* mdk-stage1/probing.c: close some fd's
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img
-	situation (no modules and/or modules.dep available)
-	continue anyway when insmod'ing of modules fail (for blank.img)
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile, mdk-stage1/disk.c: 
-	  - add DISK install from ISO image file
-	  - add FTP
-	  - add HTTP
-	  - use single place for mountpoints and static directories
-
-	* mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: 
-	  - add DISK install from ISO image file
-
-	* mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
-	mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: 
-	  - add FTP
-	  - add HTTP
-	  - use single place for mountpoints and static directories
-
-	* mdk-stage1/insmod-busybox/Config.h: tweak config
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: adduserdrake may handles autologin
-
-	* install_steps.pm (addUser): set autologin
-
-	* install2.pm (addUser): moved setAuthentication to install_steps::addUser
-
-	* install_steps_interactive.pm (addUser): fix
-
-2001/01/11  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, ChangeLog,
-	netconnect.pm: updated
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when
-	mar or marfiles not available to perform consistency check
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* interactive_gtk.pm (create_ctree): fix default value selecting failing
-	(in case of "format")
-	(ask_from_entries_refW): apply "format" on label when icon is missing
-	for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
-	icon is missing for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at
-	the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake
-	and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): moved to package any
-
-	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
-	icon is missing for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at
-	the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake
-	and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated)
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal
-	size
-
-	* mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c:
-	remove warnings from compile
-
-2001/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
-	callback on clist/list/ctree
-
-	* install_steps.pm (addUser): use any::pack_passwd
-	(setRootPassword): use any::unpack_passwd and any::pack_passwd
-
-	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
-	generic
-	(autologin): use $install which is now generic
-
-	* install_steps_interactive.pm (selectLanguage): many_languages choice
-	moved there as advanced
-
-	* my_gtk.pm (create_packtable): yet another try to have something nice :)
-	!! uses Gtk::Table::attach_raw which is available in
-	perl-GTK-0.7004-6mdk !!
-	(create_box_with_title): with the size given to set_usize for the scroll
-	containing the text widget in case of long text. and don't let the
-	scroll
-	grow.
-	(gtktext_insert): remove adding an ending "\n" (no more needed?)
-
-	* any.pm (setAutologin): cleanup
-	(pack_passwd, unpack_passwd): created
-
-2001/01/10  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: corrected last message . firewall
-
-2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm,
-	parport*, plip)
-
-2001/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
-	callback on clist/list/ctree
-
-	* install_steps.pm (addUser): use any::pack_passwd
-	(setRootPassword): use any::unpack_passwd and any::pack_passwd
-
-	* my_gtk.pm (create_packtable): yet another try to have something nice :)
-	!! uses Gtk::Table::attach_raw which is available in
-	perl-GTK-0.7004-6mdk !!
-	(create_box_with_title): with the size given to set_usize for the scroll
-	containing the text widget in case of long text. and don't let the
-	scroll
-	grow.
-	(gtktext_insert): remove adding an ending "\n" (no more needed?)
-
-	* any.pm (setAutologin): cleanup
-	(pack_passwd, unpack_passwd): created
-
-	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
-	generic
-	(autologin): use $install which is now generic
-
-	* install_steps_interactive.pm (selectLanguage): many_languages choice
-	moved there as advanced
-
-	* standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2,
-	standalone/livedrake, standalone/drakboot, standalone/draksec,
-	standalone/netdrake, standalone/mousedrake, standalone/drakgw,
-	standalone/drakxservices, standalone.pm, standalone/draknet,
-	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
-	standalone/drakxconf: use standalone and standalone::pkgs_install
-
-2001/01/09  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (drakx_version): nicer (4gc)
-
-	* install2.pm (main): log::l the drakx_version
-
-	* my_gtk.pm (create_packtable): no_expand option added
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): field
-	"disabled" added,
-	"advanced_messages" added
-
-	* lang.pm (langs): created (transform the $o->{langs} hash ref in a list)
-	(pack_langs): use lang::langs
-
-	* install_steps.pm (selectLanguage): $o->{langs} is now a ref so
-	initialize as such
-
-	* Makefile (get_needed_files): generate /usr/share/VERSION which contains
-	the version
-	of ChangeLog (which is updated at each upload)
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): handle "check
-	for bad blocks" as advanced
-	(setRootPassword): remove choosing non-md5 or non-shadow passwords.
-
-	* install_any.pm (setPackages): use lang::langs instead of using
-	$o->{langs} as a array ref (it is not so anymore)
-	(spawnShell): print the drakx_version
-
-2001/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: fixes
-	(ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH
-	(ask_from_entries_refH_powered): remove "1;" (was there for debugging)
-
-	* interactive_gtk.pm: fixes
-	(ask_from_treelistW): removed
-	(create_ctree): created, used for ``type => treelist'' entries
-
-	* my_gtk.pm: fixes
-
-	* ChangeLog: New snapshot uploaded
-
-2001/01/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated
-	Czech, Norwegian and Serbian files
-
-2001/01/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: update code for new ask_from_entries_refH
-	which doesn't handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-	(selectLanguage, selectKeyboard): use ask_from_entries_refH instead of
-	ask_from_listf_, it enables the use of advanced
-
-	* any.pm, printerdrake.pm: update code for new ask_from_entries_refH which
-	doesn't handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-
-	* interactive.pm: update code for new ask_from_entries_refH which doesn't
-	handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-	(ask_from_listf_no_check): replaces ask_from_list_no_check
-	(ask_from_entries_refH_powered): sorts the list if needed or wanted
-
-	* partition_table_raw.pm (test_for_bad_drives): created
-	- ugly stuff needed mainly for Western Digital IDE drives
-	- try writing what we've just read, yells if it fails
-	- testing on last sector of head #0 (unused in 99% cases)
-
-	* ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an
-	non-existent
-	file, stressing the ftp server :-/ )
-	for the moment, just release cdrom.img, hd.img and hdreiser.img
-	others should should come...
-
-	* install_steps.pm: for the moment, just release cdrom.img, hd.img and
-	hdreiser.img
-	others should should come...
-
-	* interactive_gtk.pm (ask_from_listW): removed
-	(create_list): calls "format" on list elems before prompting them
-	(create_clist): created
-	(ask_from_entries_refW): calls create_clist in case of list with no help
-
-	* install_steps_gtk.pm (installPackages): autoflush stdout before beeping
-	(installPackages): don't take into account the time when prompting the
-	user
-
-	* common.pm (may_apply): added
-
-	* install_any.pm (getHds): test_for_bad_drives called on hard drives
-	(getHds): ensure $o->{hds} is not set until the hard drives are checked
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* ChangeLog: New snapshot uploaded
-	New snapshot uploaded
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* ChangeLog: New snapshot uploaded
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* standalone/rpmdrake: deprecated (and has been for a long time now)
-
-	* network.pm, install_steps_interactive.pm, netconnect.pm,
-	install_interactive.pm, standalone/adduserdrake, any.pm,
-	Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm:
-	ask_from_entries_refH parameter format has changed so change all
-	accesses to it.
-
-2001/01/05  François Pons  <fpons@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: forget _exit in child process after a fork of
-	DrakX
-	removed need of packdrake binary
-
-	* Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames
-
-	* live_install2: cleanup to keep libperl.so but the right one
-
-	* live_install: no more copy of files on live system, now use environment
-	variable by DrakX cleanup
-
-	* perl2fcalls: added packdrake call (via new but incomplete) and package
-
-	* install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary
-
-	* netconnect.pm: fixed syntax error
-
-	* modules.pm: eval insmoding ide-cd (just in case)
-	removed need of packdrake binary
-
-2001/01/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan
-	and Japanese files
-
-2001/01/05  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm: help cperl-mode
-
-	* interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm,
-	interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to
-	new ask_from's:
-	- ask_from_entries_ref is deprecated, use ask_from_entries_refH
-	- ask_from_list now calls ask_from_entries_refH_powered
-	still not done:
-	- ask_from_treelist should use ask_from_entries_refH_powered,
-	and lists with no help should use CList (List is bad)
-	- keyboard and mouse binding is still rough
-	- enhance the look
-
-	* keyboard.pm: add the percentage of each keyboard types (as a comment for
-	now)
-
-2001/01/04  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: cleaned... everything should be buggy.
-
-2001/01/04  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed some old $p->{file} by new $p->[$FILE]
-	code cleanup and fixes for lilo not upgrade
-
-2001/01/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* install_any.pm: fixed the functions doing the lists of languages
-
-	* lang.pm: fixed the functions doing the lists of languages
-	The list of languages now has complete locale names insted of just
-	language
-	code (that is needed to differentiate zh_CN and zh_TW among others)
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file
-
-	* share/po/eu.po: updated Basque file
-	updated Brazilian file
-
-2001/01/04  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: some pixelization using the new if_
-
-	* install_steps_interactive.pm (setRootPassword): fix pixelization
-	keep $o->{langs} unpacked to simplify things
-	if_ pixelization
-
-	* common.pm (%EXPORT_TAGS): add if_ in "common" exported tags
-	(if_): created. Use it to replace things like
-	($::expert ? $val : ()) by if_($::expert, $val)
-
-	* keyboard.pm: nl keyboard is not used, so defaults to us_intl
-
-	* lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs}
-	unpacked to simplify things
-
-	* netconnect.pm: quite a few clean-up (and buggying)
-
-2001/01/03  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: admin user removed before beeing added
-
-	* netconnect.pm: corrected typo
-	LAN is configured with default value if firewall
-
-2001/01/03  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: fixed invocation of change_type by clicking on legend
-	unless expert
-
-	* install2.pm: fixed usage with testing
-
-	* install_steps.pm: fixed some other services to start in case something
-	gets wrong,
-	this fixes some deadlock on upgrade from 7.0.
-	fixed usage with testing
-
-	* partition_table.pm: fixed overlapping partitions between one extended
-	and one regular primary.
-	should be accepted (log printed instead of error) as diskdrake allow
-	their
-	creation in expert.
-
-2001/01/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add checks of dependencies on marfiles
-	fix a couple of broken dependencies in modules.pm
-
-2001/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format
-
-2001/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the setting of PATH and spawnShell *after*
-	setting $prefix
-
-2000/12/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: added a few locales dependences
-
-2000/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (addUser): typo fix
-
-	* ChangeLog: New snapshot uploaded
-
-	* ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (addUser): typo fix
-
-	* ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/28  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and
-	jako
-
-2000/12/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* keyboard.pm: Add the very ghost option REMOVE_MOD_META_L.
-
-2000/12/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Lithuanian file
-
-2000/12/22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: corrected admin user
-	setting for firewall install.
-
-2000/12/22  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: fixed load_multi on live.
-	added back all removed module with the new great mdk-stage1 of gégé.
-
-2000/12/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: make them work with kernel-2.4 by disabling non existent
-	modules
-
-2000/12/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage
-
-2000/12/21  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: New snapshot uploaded
-
-2000/12/21  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: firewall : automatic class set when firewall (beginner=0)
-
-	* install_steps_interactive.pm: if firewall, admin password obliged
-
-	* install_steps.pm: added setAdminpassword (a little bit redundant, sorry)
-
-	* any.pm: corrected module stuff.. Thanx to pixel
-
-2000/12/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectMouse): unsure the device exists
-
-	* unused/christmas-karaoke.patch: handle isa cards
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: New snapshot uploaded
-	New snapshot uploaded
-
-2000/12/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
-	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
-	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
-	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
-	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
-	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
-	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
-	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
-	standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
-	* unused/christmas-karaoke.patch: Happy Christmas :)
-
-	* install_any.pm: spawnShell: set DISPLAY, just in case :)
-
-	* install2.pm: set PATH before doing spawnShell
-
-	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-	* ChangeLog: New snapshot uploaded
-
-2000/12/18  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: added embedded support for control-center
-	corrected embedded support.
-	new control center and related
-
-	* netconnect.pm: corrected typo
-	corrected typo
-
-	* standalone/drakxservices, standalone/control-center, ChangeLog,
-	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
-	standalone/drakboot: new control center and related
-
-	* install_gtk.pm: added firewall support
-
-	* install2.pm: included firewall handling
-	changed firewall comportement
-
-	* install_steps_interactive.pm: changed firewall comportement
-
-	* modules.pm: corrected bad mergeinconf
-
-2000/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
-	cfI/xfI
-	remove isdndb.net
-
-2000/12/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
-	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
-	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
-	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
-	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
-	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
-	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
-	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
-	standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
-	* unused/christmas-karaoke.patch: Happy Christmas :)
-
-	* install_any.pm: spawnShell: set DISPLAY, just in case :)
-
-	* install2.pm: set PATH before doing spawnShell
-
-	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-2000/12/18  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: added embedded support for control-center
-	corrected embedded support.
-	new control center and related
-
-	* netconnect.pm: corrected typo
-	corrected typo
-
-	* standalone/drakxservices, standalone/control-center, ChangeLog,
-	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
-	standalone/drakboot: new control center and related
-
-	* install_gtk.pm: added firewall support
-
-	* install2.pm: included firewall handling
-	changed firewall comportement
-
-	* install_steps_interactive.pm: changed firewall comportement
-
-	* modules.pm: corrected bad mergeinconf
-
-2000/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
-	cfI/xfI
-	remove isdndb.net
-
-2000/12/16  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake, standalone/drakgw: use ldetect-lst
-
-	* Makefile.drakxtools: fix daminetsex
-	use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* share/list: use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* any.pm: fix daminetsex
-
-	* modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm,
-	mouse.pm: use ldetect-lst for usb => now auto detects mice types :)
-
-	* c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto
-	detects mice types :)
-	use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* Makefile.config: fix daminetsex
-	use ldetect-lst
-
-	* Makefile: use ldetect-lst for usb => now auto detects mice types :)
-	use ldetect-lst
-
-	* netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm,
-	Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net,
-	share/Cards2CardsNames: pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-2000/12/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst
-
-	* install_steps.pm: clean all unneeded stuff
-
-2000/12/14  dam's  <damien@mandrakesoft.com>
-
-	* any_new.pm, netconnect_new.pm: preparing for big jump.
-
-	* netconnect.pm: Big jump. The *_new.pm are replaced by *.pm
-	Everything should work, but you better test :)
-
-	* standalone/control-center: big improvement and cosmetic changes
-	a lot of improvement. Is able to launch multiples soft passing in
-	arguments.
-	new file. Its location should change soon.
-
-	* any.pm: Big jump. The *_new.pm are replaced by *.pm
-	Everything should work, but you better test :)
-	corrected typo.
-
-2000/12/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: obsoleted by rpmsrate
-
-	* share/rpmsrate: obsoletes compssList
-
-	* share/compssUsers, install_steps.pm, install_steps_interactive.pm,
-	Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm:
-	move from compssList to rpmsrate
-
-	* Newt/Newt.xs: cleanup (use of alloca to pass parameters)
-
-2000/12/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: updated Italian file
-
-2000/12/12  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo + if firewall, don't display 'disable network'
-
-	* standalone/draknet2: new version... still working on it
-
-	* ChangeLog: commit
-
-	* share/themes-mdk-Firewall.rc: added firewall theme
-
-	* modules.pm: my fault, corrected renaud's patch incorporation
-
-	* share/logo-mandrake-Firewall.xpm: new logo
-
-2000/12/12  François Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added packdrake.pm as packdrake has been splited.
-
-	* pkgs.pm: fixed versionCompare to always return number. added checking of
-	version to
-	select obsoletes on upgrade.
-
-2000/12/11  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: Radeon uses 3D now.
-
-	* lang.pm: fixed write_langs for upgrade.
-	i18n sucking fixes.
-
-	* Xconfigurator.pm: Radeon uses 3D hw accel theoritically now.
-
-2000/12/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Added configuration of Vietnamese input server
-
-2000/12/09  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: remove debugging code
-
-	* install2.pm (selectInstallClass): give $clicked to selectInstallClass
-
-	* interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to
-	null in case of error
-	on hidden entry cuz newt doesn't display null entries, disturbing
-
-	* install_steps_interactive.pm (formatMountPartitions): the format
-	partition dialog created at first use,
-	so that it doesn't appear if no partitions are formatted.
-	(selectInstallClass): ensure expert choice is kept if it was prechosen
-	(selectInstallClass): if expert pre-chosen, ensure expert is kept
-
-	* interactive_gtk.pm, install_steps.pm: small renicing
-
-2000/12/08  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed bug in list of packages provided by another one.
-
-2000/12/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po,
-	share/po/az.po, share/po/tr.po: updated Brazilian file
-
-2000/12/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): warn if VERSION file doesn't exist
-	(formatPartitions): call rotate_logs after mounting the partitions
-
-	* mouse.pm (write_conf): fix to make make test_pms happy
-
-	* install_steps.pm (exitInstall): save the report.bug in /root/report.bug
-
-	* any.pm (rotate_logs): created, rotates ddebug.log and install.log in
-	/root
-
-	* ftp.pm (new): retry in case of ftp connection/login
-
-	* commands.pm: report_bug: created, returns a string
-
-2000/12/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected ADSL connection choice.
-	corrected typo
-
-2000/12/06  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: erare humanum es
-	firewall begins to infect the install :).
-	new meta_class.
-
-	* share/logo-mandrake-Firewall.xpm: aded logo for firewall
-
-	* install_gtk.pm: corrected errors
-	left pixmap centered if firewall
-	improved the firewall theme.
-	errare humanum es
-	firewall infects the install.
-	The logo is changed if firewall.
-
-2000/12/06  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: add possibility to use keyboarddrake
-	non-interactive (aka give the keyboard as
-	first parameter)
-
-	* lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm,
-	install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted.
-	Now rpm uses %_install_langs in /etc/rpm/macros
-
-2000/12/05  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: final fixes to versionCompare to make sure no deadlock can
-	occurs.
-
-	* Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration.
-
-2000/12/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po,
-	share/po/es.po: updated several pofiles
-
-2000/12/04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: use isCdNotEjectable.
-
-	* common.pm: added function isCdNotEjectable.
-
-	* share/Cards+: SiS620 card are said to be unsupported by XF4.
-
-	* pkgs.pm: load only one hdlist in memory if CD is not ejectable (low
-	memory).
-	fixed compareVersion for deadlock. removed silly CODE print on deporder
-	problems.
-
-	* Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode.
-
-2000/12/03  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: incorporated cmodifications in the firewall branch
-
-	* netconnect.pm: netconnect_new > netconnect.pm
-
-	* netconnect_consts.pm: incorporated in the firewall branch.
-
-	* standalone/draknet2: incoporated in the firewall branch
-
-	* any_new.pm: any_new > any, so we remove it now.
-
-	* netconnect_new.pm: netconnect_new > netconnect, so we remove it now.
-	incorporated in the firewall branch
-
-	* modules.pm: incorporated modifications to the firewall branch. Hope they
-	won't break anything...
-
-2000/12/02  dam's  <damien@mandrakesoft.com>
-
-	* share/po/az.po: correction in firewall incorporated
-
-	* ChangeLog: first attempt ro build the firewall install
-
-	* standalone/mousedrake: incorporated in the firewall branch
-
-	* share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated
-	in the firewall branch
-
-2000/11/28  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: included reno's patches. Now should work without kudzu.
-	branch to build the firewall install.
-
-	* standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm,
-	standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm,
-	standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm,
-	standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm,
-	standalone/pixmaps/isdn.xpm: Initial revision
-	branch to build the firewall install.
-
-	* partition_table_dos.pm, share/po/bg.po, share/po/sr.po,
-	share/template.in/cdrom.kdelnk.in,
-	share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c,
-	Makefile, share/consolefonts/lat0-sun16,
-	share/themes/DarkMarble-check_off.png,
-	share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc,
-	do_resize_fat, share/po/wa.po, share/po/is.po,
-	share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm,
-	class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm,
-	install_interactive.pm, c/README, Xconfig.pm, share/themes.rc,
-	share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc,
-	share/themes-blueHeart.rc, pkgs.pm, keyboard.pm,
-	share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po,
-	standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm,
-	share/step-green-click.xpm, partition_table_sun.pm,
-	share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c,
-	share/po/.cvsignore, share/ftin.xpm, standalone/draksec,
-	resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm,
-	Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm,
-	share/themes/marble3d-button4.png, share/rpm-unselected.xpm,
-	share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png,
-	c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm,
-	standalone/livedrake, share/diskdrake.rc,
-	share/themes/DarkMarble-check_on.png, standalone/draknet,
-	share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png,
-	share/po/ro.po, share/list, share/po/cs.po, share/po/be.po,
-	share/po/sp.po, share/step-orange-click.xpm, modparm.pm,
-	share/step-green.xpm, share/rpm-base.xpm,
-	share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po,
-	share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm,
-	share/Cards2CardsNames, Newt/Makefile.PL,
-	share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po,
-	share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po,
-	standalone/icons/findf.xpm, share/po/lt.po,
-	share/themes/mdk-check_off.png, fs.pm, c/.cvsignore,
-	share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm,
-	detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm,
-	standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm,
-	Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po,
-	share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm,
-	share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po,
-	resize_fat/.cvsignore, install_steps_interactive.pm,
-	share/themes/mdk-button4.png, live_install, standalone/draknet2,
-	any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm,
-	share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm,
-	share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl,
-	swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake,
-	g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po,
-	partition_table_mac.pm, standalone/mousedrake, devices.pm,
-	share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po,
-	share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm,
-	share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po,
-	Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc,
-	share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c,
-	share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm,
-	perl2etags, share/po/Changelog, standalone/drakboot,
-	resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc,
-	share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po,
-	share/MonitorsDB, share/template.in/Dos_.kdelnk.in,
-	standalone/printerdrake, services.pm, share/kmap2bkmap,
-	share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po,
-	common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm,
-	install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16,
-	share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames,
-	c/Makefile.PL, share/themes-mdk-Desktop.rc,
-	share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm,
-	share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw,
-	share/po/sl.po, standalone/rpmdrake, share/makedev.sh,
-	share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc,
-	install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm,
-	my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList,
-	share/po/fr.po, share/themes/DarkMarble-button3_in.png,
-	standalone/icons/ftin.xpm, share/modparm.lst, raid.pm,
-	standalone/diskdrake, share/po/ko.po,
-	share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop,
-	share/po/ja.po, any.pm, share/isdndb.net,
-	share/template.in/floppy.kdelnk.in, share/step-green-on.xpm,
-	share/step-red-click.xpm, share/po/Makefile, help.pm,
-	share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po,
-	share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po,
-	loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm,
-	Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm,
-	standalone/drakxservices, resize_fat/Makefile, fsedit.pm,
-	interactive_stdio.pm, live_install2, resize_fat/directory.pm,
-	share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot,
-	share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po,
-	share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm,
-	share/themes/marble3d-check2.png, ftp.pm, c/md5.h,
-	standalone/adduserdrake, share/themes/marble3d-button2.png,
-	partition_table_raw.pm, share/template.in/zip.kdelnk.in,
-	share/locales.tar.bz2, standalone/icons/fileopen.xpm,
-	share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm,
-	commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po,
-	interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png,
-	interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm,
-	bootloader.pm, share/po/af.po: branch to build the firewall install.
-
-2000/11/28  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: change upgrade section for keyboard.
-
-	* install_steps_gtk.pm: extended chooseSizeToInstall.
-
-	* install_steps.pm: updated comment.
-
-	* pkgs.pm: fixed misuse of map with values returing list which are indexed
-	afterward.
-
-	* install_any.pm: removed some more logs.
-
-	* keyboard.pm: keep track of unknown keyboard (for upgrade)
-
-	* install_steps_interactive.pm: modified def_mark to 59 (gl hw
-	acceleration level) and upgrade use this level
-	for newbies so.
-	make sure a recommended upgrade get the minimum and a little more (80).
-	choose default size according to a default mark (currently 49).
-
-2000/11/27  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_consts.pm: added isdn Gazel card 10b5 1151
-
-2000/11/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (@bad_types): list of the different type of extended
-	partitions
-	(important_types): remove @bad_types from important_types
-
-2000/11/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ru.po: updated Russian file
-
-2000/11/24  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: doc + split
-
-	* netconnect_new.pm: added depmod after having writed modules.conf
-
-	* standalone/mousedrake: splited
-
-2000/11/24  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid .la files for selection.
-
-	* install_steps.pm: added missing portmap.
-
-2000/11/23  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: progressbar.
-
-2000/11/23  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: updated with
-	structural change of pkgs.
-
-	* install_any.pm: removed some ugly logs.
-	updated with structural change of pkgs.
-
-	* install_steps.pm: added tempory fix for initscripts %post.
-	updated with structural change of pkgs.
-
-	* pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk.
-	removed ugly log on transaction.
-	added special case to avoid counting kernels space when upgrading
-	as these package are not upgraded (just installed).
-	Memory usage optimization, change structure of storing
-	package informations. lot of fork to make sure of
-	freeing memory by perl (no free on used hashes or arrays
-	usable by other than perl), now upgrade takes as much as
-	install which takes at least 0.5Mb less than before.
-
-2000/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: put all tina stuff to weight 0
-
-2000/11/21  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files,
-	keep
-	wacom entries.
-
-	* Xconfigurator.pm: upgrade for XF86Config, take care of resolution and
-	depth wanted.
-
-	* install_steps.pm: always try to get default from /etc/X11/XF86Config
-	removing logs.
-
-	* pkgs.pm: cosmetic changes for upgrade, removing some logs.
-
-	* install_steps_interactive.pm: removed code to ask if take care of
-	/etc/X11/XF86Config* files.
-	added wait message during rebuild of rpm database as it takes some time.
-
-	* Xconfigurator_new.pm: WARNING
-
-2000/11/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2000/11/20  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: clean up as today filelist is no more.
-	use parsehdlist from rpmtools-2.1-3mdk or above instead of
-	perl code from DrakX forking to simulate a filelist server.
-	this increase performance by 100 to 150% on selection of
-	packages to upgrade.
-
-	* share/list: added parsehdlist.
-
-	* c/stuff.xs.pm: removed logs.
-
-2000/11/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/Cards+: add radeon
-
-	* install_steps_auto_install.pm (exitInstall): fix message
-
-	* install_steps.pm (afterInstallPackages): moved the
-	writeandclean_ldsoconf here
-
-	* fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points
-
-2000/11/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: add openuniverse to the list of gl apps
-
-2000/11/16  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: corrected isdn_get_{list, info}
-
-2000/11/16  François Pons  <fpons@mandrakesoft.com>
-
-	* share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-)
-
-	* modules.pm: tempory version for current glibc, a lot of module have been
-	removed due to
-	problem of stage1 increase in size when compiled with glibc-2.2 and
-	current
-	modutils.
-
-	* c/Makefile.PL: updated with rpmlib 4.
-
-	* c/stuff.xs.pm: completed something that seems to work almost correctly
-	at the first look
-	with rpmlib 4.
-
-2000/11/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: add netscape-german, thx to florin
-	isdn4k-utils gets same weight as isdn4net, thx to Florin
-
-2000/11/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/sk.po: updated Slovak file
-
-2000/11/15  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: added isdn_get_list and isdn_get_info
-	calls modules::write_conf to fill the modules.conf.
-
-	* Xconfigurator_new.pm: added to fork frontends backends. Not operationnal
-	at all for now.
-
-	* modules.pm: when loading a new module, add an alias for it, even in
-	standalone mode.
-
-2000/11/15  François Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.xs.pm: updated for rpm 4.
-
-	* pkgs.pm: rpmdepOrder again (for new TAGp)
-
-2000/11/15  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile.PL: add librpmio
-
-	* c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc
-	(dev_t)
-
-2000/11/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: better structure for the ethx-driver.
-	added call to add_alias and write_conf
-
-	* standalone/draknet2: updated
-
-2000/11/14  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: removed foreach (<... which are eating memory
-	fork install on upgrade for searching trhough filelist, this saves
-	about 20Mb of memory before rpmlib transaction are started so its is
-	more than 2 times faster for upgrading a system, sorry it was
-	effectively
-	a machine two overloaded that makes the upgrade slower.
-	make rpmlib not to check size as DrakX should do it.
-	added special cases for selection of packages according to files, avoid
-	all kde-i18n packages if their locales-$lang is not selected, avoid
-	a -devel package if only one files is updated (typical for fixes on
-	package by moving files around).
-	
-	deactivated rpmdepOrder as it should be done directly in
-	depslist.ordered
-	file.
-	
-	fixed obsoletes which never run correctly, even if almost no package are
-	selected explicitely this way.
-	
-	added log during selection of packages to upgrade to keep a track of
-	what DrakX is doing.
-
-	* modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm,
-	Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm,
-	printer.pm, Xconfigurator.pm: removed foreach (<... which are eating
-	memory
-
-2000/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2000/11/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: Integrate Till's patches for better work with Cups.
-
-2000/11/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake: fix for bug #1350
-	(mousedrake dies with: Undefined subroutine &mouse::serial_ports_names)
-
-	* pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and
-	.cz22 for
-	.cz2) that makes for than one CD install breaks :-(
-
-2000/11/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2000/11/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: draknet2 : new version of draknet, post-install
-	only, uses only libDrakX backend, beautyfull
-
-	* netconnect_new.pm: completed adsl_conf_backend
-	corrected conf_network_card_backend : return interface and module
-	separately
-	splitted pppconfig.
-
-2000/11/10  François Pons  <fpons@mandrakesoft.com>
-
-	* share/po/fr.po: typo fixing
-
-	* printerdrake.pm: fixed wrong case for managing IP for remove CUPS server
-	updated typo for remote CUPS server configuration dialog
-
-2000/11/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files
-
-	* share/po/wa.po, share/po/da.po: updated Danish and Walloon files
-
-2000/11/10  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent
-	section)
-
-2000/11/09  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: added handling for 2 ethernet cards with the same module
-
-2000/11/09  François Pons  <fpons@mandrakesoft.com>
-
-	* share/po/fr.po: add some missing translation (mainly printer for CUPS
-	remote config)
-
-	* printer.pm: make sure to restart cups when cupsd.conf is modified.
-
-	* printerdrake.pm: fixed modification of BrowsePoll on a existing file.
-
-2000/11/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: updated
-
-2000/11/08  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: make sure class discarding do not destroy result
-
-	* pkgs.pm: added new function for selected or installed accessor on pkg
-	make sure package already installed for oem are marked as selected, as
-	some
-	code refer to this state to perform some actions (install_urpmi)
-
-	* install_steps.pm: fixed for urpmi again;
-
-	* printerdrake.pm: add management of BrowsePoll <ip>:<port> in
-	/etc/cups/cupsd.conf
-
-	* printer.pm: add minimal management of /etc/cups/cupsd.conf
-
-2000/11/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136)
-
-2000/11/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-2000/11/07  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: now there are 8 ttyS* available for configuration. Used for
-	internal modem configuration that uses ttyS* > 3
-
-	* netconnect_new.pm: ttyS0 -> ttyS7 available for configuration
-	some doc
-
-2000/11/07  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128).
-
-	* install_steps_interactive.pm: use of install_any::boot_medium to avoid
-	listing medium used for boot
-
-	* install_any.pm: use of $boot_medium where the boot medium is used
-	(default 1)
-
-2000/11/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to
-	<sileryti@mail.com>
-
-2000/11/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): in oem, configureX automatic
-	(main): $::oem is now global :-(  (needed in install_steps.pm)
-
-	* install_steps.pm (afterInstallPackages): give medium 'cdrom' to
-	install_urpmi in case of $::oem
-
-2000/11/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: backend/frontend fork complete
-
-	* any_new.pm: load_thiskind changed to load_thiskind_backend, the wait
-	function is passed by argument
-
-	* network.pm: configureNetwork2 commented.
-
-2000/11/06  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: created function for examining already installed package on
-	install (oem).
-
-	* install2.pm: add a flag to allow by default formating /
-
-	* install_steps.pm: conditionnal format of / and use already installed
-	packages if any on install.
-
-2000/11/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius
-	<ajulius@yahoo.com>
-
-2000/11/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file
-	GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to
-	ascii transliteration for them
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds
-
-2000/11/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (formatPartitions): formatMountPartitions done even in
-	upgrade
-	(main): set $o->{partitioning}{use_existing_root} in oem
-
-	* install_steps.pm (doPartitionDisksAfter): remove the mount_all which is
-	plain dumb
-	(doPartitionDisksAfter): fs::mount_all moved here
-	(doPartitionDisks): use $o->{partitioning}{use_existing_root}
-
-	* install_any.pm (use_root_part): fs::mount_all really removed
-	(use_root_part): fs::mount_all removed
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): don't propose
-	already mounted partitions
-	(installCrypto): nicer layout
-
-2000/11/05  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse'
-
-2000/11/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette
-	<yves@maniette.com>
-
-2000/11/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eo.po: updated Esperanto file
-
-2000/10/31  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: continuing forking frontend - backend. adsl ist
-	nearly finished
-
-	* any_new.pm: added this file to fork frontends and backends in any.pm
-
-2000/10/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux
-	tu damsera
-
-2000/10/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-
-	* share/keyboards.tar.bz2: updated keyboards
-
-2000/10/30  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (load_po): backslash @ in po strings, otherwise the eval fails
-
-2000/10/28  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: new version of draknet. Splited frontends - backends
-
-2000/10/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-2000/10/27  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: remove the noising rpm output command line when loging
-	installed rpm
-	size (only usefull for live_update and just for conveniance).
-
-	* pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP
-	hack)
-	before reading a compssUsers file.
-
-	* live_install: add VERSION in list of file that have to be symlinked.
-
-	* common.pm: list_skels returns list of existing directory and writeable.
-
-	* live_install2: Make sure to remove font path in /tmp/drakx before
-	exiting.
-
-2000/10/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and
-	Turkish files
-
-2000/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: fortune-mod gets 10/0/10 on request from egil
-
-2000/10/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-2000/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: updated Catalan file
-
-2000/10/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns
-	to please jl :)
-
-	* detect_devices.pm (floppies, probeall): add require "modules" as it
-	should be
-
-	* install_interactive.pm (partitionWizardSolutions): add "require
-	resize_fat::main" as it should be
-
-2000/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has
-	74/0/74
-
-2000/10/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish
-	and Ukrainian files
-
-2000/10/20  fabman
-
-	* share/po/es.po: updated
-
-2000/10/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: ntp to -1/-1/-1
-
-2000/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: put all packages requiring kde1-compat to 0 except
-	kisdn-free
-	aumix now gets a high weight (79) because it's required to save the
-	mixer
-	settings at shutdown
-
-2000/10/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212)
-
-2000/10/19  tlb
-
-	* share/po/da.po: 100%, Troels Liebe Bentsen.
-
-2000/10/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: Added AZeri file
-
-	* share/po/no.po: updated Norwegian file
-
-2000/10/17  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused
-	code in ineractive_gtk
-	added some isdn card in pcitable
-	corrected typos, and made ISA isdn work
-
-2000/10/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/lv.po: updated Latvian file
-
-2000/10/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-	* standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace
-	setting
-
-2000/10/16  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (cdroms): fix the setting of scdX for ide burners
-
-	* share/compssList: sympa is -1 except for server
-
-	* keyboard.pm (write): small pixelization (neater now)
-
-	* install_steps.pm (installPackages): don't run ldconfig in g_auto_install
-
-2000/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2000/10/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: small fix for Swedish locale
-
-	* share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po,
-	share/po/wa.po, share/po/de.po: updated Bulgarian file
-
-2000/10/13  François Pons  <fpons@mandrakesoft.com>
-
-	* partition_table_empty.pm: empty partition table as assumed only if the
-	MBR is really composed of only null chars.
-
-2000/10/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: added viavoicemenu
-
-2000/10/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (ask_mntpoint_s): dqs
-
-2000/10/11  Pixel  <pixel@mandrakesoft.com>
-
-	* .cvsignore: ignore flog files
-
-	* install2.pm (main): test
-
-	* ChangeLog: qsdqsd
-
-	* install_steps_interactive.pm: * (selectKeyboard): set default
-	$o->{langs} to $o->{lang}
-
-2000/10/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, ChangeLog: make only one call to urpmi in order to
-	install all the needed rpm's
-
-2000/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/es.po: updated Norwegian file
-
-	* share/po/pl.po: updated Polish file
-
-	* share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file
-
-2000/10/10  tlb
-
-	* share/po/da.po: 99%.
-
-2000-10-10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: make only one call to urpmi in order
-	to install all the needed rpm's
-
-2000-10-10  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-10  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: increase $::VERSION
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: update after Dam's new messages in netconnect
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): remove the handling of
-	doc desktop icons. see dadou
-
-2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: new list (with icons)
-
-	* share/list: add icons for compssUsers
-
-2000-10-09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: added wait message
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/themes-*.rc: change the fg[INSENSITIVE] entry
-
-2000-10-09  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added tuxracer in OpenGL games to install if an
-	accelerated card has been found.
-
-2000-10-09  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): asking connection after writing start/stop scripts.
-	(adsl_conf): if during install, don't use chkconfig, make the
-	links directly for the adsl init script.
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): UserView in kdmrc is
-	now true by default. So put false if security >= 3 instead of
-	removing it.
-
-2000-10-09  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: default speed of modem set to 115200.
-
-	* fs.pm: fixed format of RAID partition.
-
-	* install_interactive.pm: take into account RAID partitions for
-	searching / partition.
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (selectKeyboard): don't assume $o->{langs} is set
-	(selectLanguage): don't set $o->{langs} (so that you can go back
-	and it works)
-
-	* common.pm (round_up, round_down): ensure number is an integer
-
-	* install_steps_interactive.pm (chooseGroups): take into account
-	the min_level to compute the size
-
-2000-10-08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): move the
-	computing of max_size before calling chooseGroups (not the one for
-	desktop meta_class)
-	(chooseGroups): compute the size of Miscellaneous
-
-2000-10-07  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: don't install locales-* even in 'all' install
-	(those files are usefull if RPM_INSTALL_LANG doesn't include that
-	lang)	
-
-2000-10-07  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-07  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (install): log the gonna be installed packages (-> be
-	able to track not installed packages that should have been
-	installed)	
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf
-	(intro): connection detection improved : now use "ifconfig | grep interface"
-	(pppConfig): corrected cnx_up/down
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): don't fail if
-	kdeglobals file is not there	
-
-	* share/compssUsers.desktop: fix icons
-
-	* detect_devices.pm (cdroms): fix for scsi cdrom drives
-
-	* pci_probing/pcitable: put cs46xx instead of snd-card-cs461x
-	(dixit jeff)
-
-	* diskdrake.pm (Resize): comment ext2&reiserfs resizing for the
-	moment	
-
-2000-10-06  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Xconfigurator.pm (write_XF86Config): added mode of wacom devices
-
-2000-10-06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (ask_connect_now): connection is now tested.
-
-2000-10-06  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: updated
-	license.
-
-	* Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by
-	DRI, use only Mesa with Utah GLX, fixed autologin for avoiding
-	drakres and no wm available, moved Riva128 card from experimental
-	to stable, fixed presentations of text.
-
-	* pci_probing/pcitable: fixed Cirrus Logic sound card.
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: fixed bad call to hasUsb...
-
-	* share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep
-	530, 620 and 6326 with XFree 4.0.1.
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore	
-
-	* install_steps.pm (afterInstallPackages): put the Charset in
-	kdeglobals, otherwise kde uses charset iso8859-1 :(
-
-	* lang.pm (charset): created
-
-	* common.pm (update_userkderc): fix it, change the argument
-	passing	
-
-2000-10-05  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: raise kde-i18n-*, should be installed whenever
-	kdebase is installed
-
-	* pci_probing/pcitable: integrate patch from viet (concerns
-	sym53c8xx cards)
-
-	* share/compssUsers: use "documentation" as the database icon
-
-	* install_steps_interactive.pm (chooseGroups): fix to accept icons
-	not in the format "*_section.xpm"
-
-	* install2.pm (miscellaneous): put yes/no in sysconfig/usb entries	
-
-2000-10-05  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (adsl_conf): updated pppoe conf.
-	(main): added $netc->{minus_one} to avoid to count dhcp configured
-	eth when asking to share the connection.
-	(adsl-pppoe): improvement. Should work now.
-	(miscellaneous): corrected chmod 755 to 744 for connections scripts
-
-	* netconnect.pm (main): network is stopped then started, instead
-	of restarted.
-
-2000-10-05  François Pons  <fpons@mandrakesoft.com>
-
-	* live_install: added icons (this fixes the yellow on white
-	tooltips problem).
-
-	* install_any.pm: added ghostscript-utils in the list of packages
-	to copy when changing CD.
-
-	* printerdrake.pm: install ghostscript-utils if a lexmark printer
-	is selected on cups.
-
-2000-10-05  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (loadO): look for auto_inst.cfg in /, not in
-	/Mandrake/base	
-
-2000-10-05  François Pons  <fpons@mandrakesoft.com>
-
-	* netconnect.pm: fixed syntax error.
-
-	* share/po/i18n_compssUsers: simplified version and fixed
-	dependancies to pkgs.pm (for building drakxtools).
-
-2000-10-04  François Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: removed 80 pixel on height for live upgrade.
-
-	* install_steps.pm: do not set keyboard when live upgrade after
-	setting the language.
-
-	* install_steps_gtk.pm: fixed the trying to start a X server on
-	live.
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/i18n_compssUsers: fake module ``c'' so that no need to
-	build DrakX to use i18n_compssUsers
-
-	* install_steps_interactive.pm (selectLanguage): update license
-
-	* install_steps_gtk.pm (installPackages): add second license for
-	shitty soft (commercial one)
-
-2000-10-04  dam's  <damien@mandrakesoft.com>
-
-	* draknet (netconnect.pm and network.pm): various translations
-	corrected, network is restarted, buttons connect/disconnect
-	debugged. 
-
-2000-10-04  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): kill prefdm instead of autologin
-
-	* install_any.pm (find_root_parts): don't use
-	suggest_mount_points, it couldn't do what we wanted	
-	(guess_mount_point): created, contains the common stuff between
-	suggest_mount_points and find_root_parts
-
-2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: fix some failing/untranslated i18n messages
-
-	* share/po/fr.po: write translations according to drakgw
-	
-2000-10-04  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed bad card for 3D Rage Pro.
-
-	* install_any.pm: removed Aurora for SiS card, add more case for
-	detecting right cdrom for live upgrade, fixed wrong list of
-	packages for laptops.
-
-	* c/stuff.xs.pm: added time interval of 200ms between update of
-	progression bar of install, make sure the last step is seen.
-
-2000-10-04  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (when_load): stricter regexp for $type is scsi or not
-	(so that scsi_mod with is scsi_raw doesn't get an alias
-	scsi_hostadapter)	
-
-	* detect_devices.pm (isLS120Drive): extend the regexp to include
-	"Caleb Technology - 144MB FDD UHD Floppy"
-
-	* detect_devices.pm (burners, IDEburners): reworked, renamed, now
-	works!	
-	* c/stuff.xs.pm (isBurner): created
-
-	* modules.pm (load_ide): make sure ide-cd is loaded!
-
-	* install_steps_interactive.pm (chooseGroups): the label and help
-	are now translated (at least will be), so use the translations
-
-2000-10-03  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile (DrakX.pot): added the to-be-translated from
-	compssUsers
-	* share/po/i18n_compssUsers: read the compssUsers's and output the
-	to-be-translated in po format
-
-	* log.pm (l): log to STDERR instead of STDOUT
-
-	* install_any.pm (loadO): use first floppy drive available (won't
-	help much though, as stage1 doesn't follow this...)
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): don't propose autologin in
-	security > 3
-
-	* common.pm (availableRamMB): HACK HACK if i810 and memsize,
-	returns 127
-
-	* bootloader.pm (suggest): don't use grub if more than 800MB
-
-2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/validate.pl: create this tool
-	
-	* share/po/fr.po: fix many typos
-
-	* share/po/fr.po: make compssUsers translation
-
-2000-10-03  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: changed resolution allocation.
-
-	* fs.pm: removed no more used log.
-
-	* install2.pm: add exit button if live upgrade.
-
-	* install_any.pm: increased minimal available size to 65Mb.
-
-	* install_steps.pm, standalone/printerdrake: fixed cups to CUPS
-	for mode.
-
-	* printerdrake.pm: fixed not_edit for lpr mode of printerdrake.
-
-	* share/Cards+: fixed Savage2000 entry.
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-03  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated bad card with Rage Mobility card.
-
-	* live_install: added test of root user, abort if not root.
-
-2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed bug #518 and fixed other misc errors
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-02  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm (Resize): fix to make ext2resizing work a little
-	better	
-
-	* install_steps.pm: fixed installation of urpmi configuration.
-
-	* detect_devices.pm: updated comment about UltraDMA66/100
-	management.
-
-	* modules.pm: updated comment about UltraDMA66/100 management.
-
-	* diskdrake.pm: adding a cylinder for the minimum of the resize
-	and if there is nothing to do for resize, simply return.
-
-	* install_any.pm: added missing require pkgs.
-
-2000-10-02  Pixel  <pixel@mandrakesoft.com>
-
-	* many files: remove many lnx4win special cases which are not
-	needed anymore        
-	
-	* any.pm (addUsers): grpuser output goes to Mr Dave
-
-	* bootloader.pm (install_lilo): change the default color of menu
-
-	* install_steps_interactive.pm (choosePackages): add 300MB choice
-	in desktop
-
-	* mouse.pm (fullnames): fix i18n fix
-
-	* install_steps.pm (miscellaneous): don't add ide2=0x... for
-	ultra66 (otherwise chmouel is not happy, so is hdc being hde)
-	
-	* Xconfigurator.pm (main): add handling of icewm logout
-
-	* c/stuff.xs.pm: changed the stepping of "Progressing installing package"
-
-2000-10-02  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): infos are written only when needed.
-	* netconnect.pm (intro): connection checking now works.
-	
-2000-10-02  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like
-	jeff request.
-
-2000-09-30  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-30  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: a LOT of bugs fixed. draknet is now completely
-	brok^H^H^H^Hfrozen.
-
-2000-09-29  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-29  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (adsl_conf): dhcp should better work.
-
-	* network.pm (configureNetwork): remove connection script if a
-	gateway is given.
-
-	* common.pm (setVarsInShMode): created. chmod the file with
-	permissions passed in argument.
-
-2000-09-29  François Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm (load): fixed when standalone, use modprobe.
-
-	* pkgs.pm: added preference for wu-ftpd.
-
-	* detect_devices.pm: added code to proble USB printer.
-
-	* printer.pm: fixed missing PRINTER=yes on CUPS configuration for
-	USB printer.
-
-	* install_steps.pm: removed possibilty to add an user in urpmi
-	group (jloup).
-
-	* install_steps_interactive.pm: log if CD not ejectable.
-
-2000-09-29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: sync with latest packages
-
-	* install_steps_interactive.pm (selectLanguage($)): s/42/43/ in
-	  MandrakeSoft physical address 
-
-2000-09-29  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-29  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (intro): detection of internet
-	configuration/connexion state.
-	
-	* network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_thiskind): add read_already_loaded cuz of
-	pcmcia	
-
-2000-09-28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: add nasty DrakSync and DrakProfile with 50 0 50
-
-2000-09-28  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): the minimum is 25
-	in beginner, not 10
-
-	* pkgs.pm (readCompssUsers): fix reading description
-
-	* install_steps.pm (afterInstallPackages): remove the code to
-	handle RPM-GPG-KEYS
-
-2000-09-28  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_list_with_helpW): no more theme
-	parsing, no more draknet.rc
-
-	* netconnect.pm (read_net_conf): no adsl tree anymore.
-
-	* netconnect.pm: drakgw called if enough card are installed.
-
-	* netconnect.pm: minor bugs correction.
-
-2000-09-28  François Pons  <fpons@mandrakesoft.com>
-
-	* Makefile.config: added livedrake for drakxtools.
-	* diskdrake.pm: use corrected partition size when resizing a dos
-	partition (like the others).
-	* install_any.pm: no more pnm2ppa packages and others in package
-	to copy when changing CD.
-	* live_install: exec live_install2 instead.
-	* live_install2: contains post live upgrade stuff now.
-	* printerdrake.pm: protect set_help() usage by if $::isInstall,
-	removed reference to package pnm2ppa and others.
-	* standalone/livedrake: initial release for drakxtools.
-
-2000-09-28  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partitionWizardSolutions): fix the limit
-	cases for lnx4win	
-
-	* share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation	
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): set $size2install
-	to $availableC in desktop install, as it should be
-
-	* install2.pm (choosePackages): remove the code for removing kdesu
-	in high security...
-
-	* install_steps_interactive.pm (createBootdisk): format more
-	nicely the text
-
-	* install_steps_gtk.pm (installPackages): add 10 seconds to have a
-	better estimation
-
-	* install_steps_interactive.pm (chooseGroups): now returns a boolean
-	(choosePackages): use chooseGroups return value to redo
-	choosePackages	
-
-	* install_steps_gtk.pm (selectMouse): if mouse type is none, then
-	don't test!
-
-	* Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom
-
-	* various: replace all Rescue by Update
-
-	* pkgs.pm (readCompssUsers): read description for groups
-	
-	* install_steps_interactive.pm (chooseGroups): add description for
-	groups	
-
-2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers.desktop: added description
-
-	* share/compssUsers: added description
-
-	* share/compssUsers.desktop: added icon support, reordered,
-	  renamed
-
-	* share/compssUsers: reordered, renamed
-
-2000-09-27  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectLanguage): intregrate
-	license again
-
-	* pkgs.pm (readCompssUsers): reads compssUsers.meta_class
-
-	* diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/''
-	(as should be)
-
-	* install_steps_gtk.pm (selectInstallClass1): if @$l (list of
-	install classes) contains only one element, call
-	install_steps_interactive::selectInstallClass1	
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fix for
-	"no partitions selected to format"
-
-	* my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie	
-
-2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: more for gnupg, -11 for sucking things,
-          changed compss-groups to be less than 70.
-
-	* share/compssUsers: modified compssUsers with Warly, added
-          compssUsers.desktop, simplified for KD (now uses Graphical
-	  Desktop/KDE instead of listing all relevant packages)
-
-2000-09-27  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (get_info_adsl_providers, read_adsl_providers):
-	Created. adsl provider tree. 
-	(set_net_conf): better informations storing.
-
-	* my_gtk.pm (new): windows are always centered if standalone.
-
-2000-09-27  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed
-	3D hw acceleration for i815 (VideoRam). prefer XF3 for all
-	NeoMagic cards.
-	* install_gtk.pm: re-enabled themes on live upgrade but without
-	modifying background image.
-	* install_steps_gtk.pm: fixed missing help.
-	* live_install: lot of fixes to enable DrakX font, keep upgraded
-	system clean (libperl.so which allows graphical login).
-	* pkgs.pm: added function allowedToUpgrade to filter kernel
-	package.
-
-2000-09-27  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): if `clicked' don't go
-	to auto mode
-
-	* Xconfigurator.pm (monitorConfiguration): fix the translated
-	'Generic' which is not so (and must not be so) anymore
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: remove all Unskip code
-
-	* my_gtk.pm (_create_window): add shortcut alt-e to switch to
-	expert
-
-	* Xconfigurator.pm (resolutionsConfiguration): fix for setting
-	legal resolution
-
-	* install_steps_interactive.pm (selectLanguage): use formatAlaTeX
-	on the license
-
-2000-09-26  François Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: added mounting of swap partition when mounting them
-	all (this can help :-) 
-	* pkgs.pm: fixed correction size code to make (really) a true
-	bijection between corrected and rpm size.
-
-2000-09-26  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectLanguage): integrate the
-	license (temporary one)
-
-	* modules.pm (write_conf): fix the /etc/modules generation
-
-	* interactive_gtk.pm (ask_many_from_listW): if more than 5 entries
-	in icon format, use scrollbar. In non-icon format, use scrollbar
-	for more than 11 entries.
-
-	* commands.pm (bug): add ddcxinfos
-
-	* pci_probing/pcitable: replace tulip by de4x5 for 2104x cards	
-
-2000-09-26  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added more 3D Rage Pro card for 3D
-	acceleration with Utah-GLX (Rage Mobility, Rage XC/XL),
-	modified identification for checking acceleration.
-	* install_any.pm: added automatic installation (up 60) for
-	OpenGL games if a graphic card MAY BE accelerated.
-	* live_install: fixed perl idioms in pure shell script and added
-	packdrake symlink if not already installed.
-	* share/compssList: changed level to -1 for all needing 3D hw
-	acceleration packages.
-
-2000-09-26  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (write_resolv_conf): write temp dns line to be used
-	with new initscripts package. Use to set dns live.
-
-2000-09-26  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (read): catch exception if fullname2mouse fails (eg:
-	old FULLNAME format)
-
-2000-09-25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/MonitorsDB: merge with latest redhat MonitorsDB
-
-	* pci_probing/pcitable: major merge with latest redhat pcitable
-
-	* share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to
-	"Rage 128", added "Rage 128 Mobility"
-
-	* install_any.pm (getAvailableSpace): keep 10% of free space on
-	big partitions
-
-	* Xconfigurator.pm (readMonitorsDB): don't translate Generic
-	(otherwise, only a part is translated, see MonitorsDB for the
-	non-translated part)
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* install_gtk.pm (test_mouse): smaller box to fit in 640x480
-
-	* install_steps.pm (afterInstallPackages, beforeInstallPackages):
-	RPM-GPG-KEYS is copied before installing packages
-
-	* pkgs.pm (readCompssUsers): handle icons in compssUsers
-
-	* common.pm (truncate_list): ensure the list is not too big
-
-	* install_steps_gtk.pm (choosePackagesTree): restrict the list to
-	20 elements if it is too big (use truncate_list)
-
-2000-09-25  François Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: add Video mode for entry.
-	* fs.pm: updated for live upgrade.
-	* install2.pm: dropped unuseful steps filtering.
-	* install_any.pm: fixed wrong Device3Dfx package name and clean
-	postinstall rpms directory on upgrade before filling it.
-	* install_gtk.pm: removed window restrictions of live upgrade.
-	* install_steps.pm: fixed initrd symlink following in case of
-	upgrade.
-	* install_steps_gtk.pm, install_steps_interactive.pm: keep always
-	upgrade on live upgrade.
-	* modules.pm: may fixed pcmcia lost driver (typically on network).
-	* pkgs.pm: fixed (uggly?) usage of floating perl data on perl
-	script :-)
-	* printer.pm: back to "Generic PostScript" for default printer (jloup).
-	* printerdrake.pm: make sure an expert can choose among available
-	devices.
-
-2000-09-25  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (write_resolv_conf): write '# ppp temp entry adsl' in
-	/etc/resolv.conf if needed.
-
-	* netconnect.pm : adsl connection does'nt need any dns anymore.
-
-	* netconnect.pm (read_net_conf): created. draknet now stores and
-	reload the config.
-	
-	* netconnect.pm (main): if the user is french and uses french
-	keyboard, don't ask his country.
-
-2000-09-25  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: added 8139too
-
-	* share/Cards+: GeForce2 DDR is handled by driver "nv"
-
-	* Xconfigurator.pm (main): in killall X for Xdrakres, also killall
-	kdm/xdm/gdm/autologin :)
-
-2000-09-25  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-25  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (configureNetwork): Warn user if he already
-	configured the interface.
-
-2000-09-24  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (mergein_conf): created. call read_conf, fills
-	%modules::conf and set $modules::scsi
-
-2000-09-24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit
-
-2000-09-24  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-24  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (bug): use first floppy drive instead of fd0 hard
-	coded (nice for LS120's)
-
-	* install_steps_gtk.pm (selectMouse): if device changed, do the
-	test	
-	* standalone/mousedrake: fix for serial mice
-	* install_steps_interactive.pm (selectMouse): fix for serial mice
-
-2000-09-23  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (conf_network_card): now displays the modules of
-	detected ethernet cards.
-
-2000-09-22  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): calls drakegw.
-	* netconnect.pm (get_net_device): fixed
-
-2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw:
-	  - added logs
-	  - added verbose mode
-          - fixed wrong stopping of named in other languages than english
-
-	* netconnect.pm (get_net_device): try to fix it..
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard,
-	choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list
-	(): 
-
-	* interactive.pm (ask_many_from_list): now only ask_many_from_list
-	exists, obsoleting ask_many_from_list_ref and
-	ask_many_from_list_with_help. More flexible and nicer
-	* interactive_newt.pm (ask_many_from_listW): adapted to new
-	calling type
-	* interactive_gtk.pm (ask_many_from_listW): adapted to new calling
-	type, handle 'shadow' and 'icon2f'
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win}
-
-	* Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for
-	i810	
-	(testFinalConfig): i810 is a verybad_card, aka can't test anything
-	on it :-(
-	(main): fork to background and stay there while waiting for the WM
-	to exit
-	(testFinalConfig): update the backgroung image path
-
-	* interactive_gtk.pm (exit): flush X before leaving (otherwise the
-	mousecursor is not restored)
-
-	* run_program.pm (rooted): don't redirect the stdout and stderr to
-	ddebug.log if not $::isInstall
-
-	* log.pm (l): log on stdout/stderr if !isInstall and !isStandalone
-
-	* modules.pm (load_raw): redirect stderr to tty5
-
-	* install2.pm (main): set variable $::isInstall
-
-2000-09-22  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: now includes information from netconnect to
-	ignore the interface used for Internet connection
-
-2000-09-22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectInstallClass1): pixel's typo.
-
-	* netconnect.pm (get_net_device): added get_net_device to know
-	which interface has been used to configure the internet connection.
-	(conf_network_card): ask to restart network if dhcp too.
-	(main): enable dialing when modem.
-
-	* network.pm (configureNetworkIntf): changed label to warn people
-	about already configured eth cards.
-
-2000-09-22  François Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: added Desktop themes.
-	* share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png:
-	initial release.
-	* install2.pm: moved back to all steps for live upgrade.
-	* install_gtk.pm: select right logo if desktop.
-	* install_steps_interactive, install_steps_gtk.pm: avoid asking if
-	upgrade for a live upgrade.
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: add some call to log_sizes to log the
-	installed size
-
-	* install_steps_gtk.pm (installPackages): beep before changeMedium		
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf): try to call the f translation
-	function on the default value with the index
-
-	* install_steps.pm (afterInstallPackages): make the gpg code work,
-	changed the call to 
-	"gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS"
-
-	* detect_devices.pm: cleanup and removed unused code
-
-2000-09-21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* detect_devices.pm (getNet()): really remove plip in standalone
-
-2000-09-21  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, netconnect.pm: changed NETWORKING reference
-	from false to no.
-	* printer.pm: changed timeout from 30 to 60.
-	* printerdrake.pm: added wait message when waiting for cups to
-	start.
-	* pci_probing/pcitable: added erwan VIA Rhine board.
-	* network.pm: added DHCP_HOSTNAME reference.
-
-2000-09-21  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: fix for XF4
-
-	* Xconfigurator.pm (write_XF86Config): comment the omit
-	xfree86-dga	
-
-	* install_steps.pm (afterInstallPackages): configure GPG public
-	keyring with mandrake key	
-
-	* standalone/mousedrake: updated/fixed for new mouse handling	
-
-	* install2.pm (main): update for handling oem installs
-
-	* many files: relGetFile cleanup, updated calls to getFile and
-	getAndSaveFile accordingly
-
-	* Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg
-
-	* detect_devices.pm (@netdevices): plip removed in standalone,
-	otherwise plip is always there (because of kmod)
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): replace
-	the die "cancel" by die "already displayed", so that no error is
-	displayed.
-
-	* pci_probing/pcitable: replace some rtl8139 by 8139too, added
-	cards DELTA8139 and ADDTRON8139 (for jeff)
-
-	* Xconfigurator.pm (show_info): also show the colordepth and
-	resolution. don't show server if none, show XF4 driver if there's
-	one.	
-	(main): change the "Forget the changes" to "Keep the changes?"
-	with displaying the current configuration.
-
-2000-09-21  François Pons  <fpons@mandrakesoft.com>
-
-	* printer.pm: changed "PostScript" ppd default description to "Raw
-	queue (no filtering)", asked by Till.
-	* Xconfigurator.pm: add log of what user select for 3D hw
-	acceleration.
-	* share/compssList: changed XFree86-glide-module to -2 because the
-	level is the same for XFree86-Glide* which may have multiple
-	different version installed due to dependancies of the first one.
-
-2000-09-21  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (conf_network_card): added check when dhcp. Cable connection
-	should now work.
-
-2000-09-21  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (exitInstall): call $o->exit if
-	"Some steps are not completed"
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (install_loadlin_config_sys,
-	install_loadlin_desktop): extracted from install_loadlin, do not
-	call them anymore (remove it?)
-	(suggest): put grub in lnx4win install
-
-	* common.pm (availableRamMB): fixed (round to a multiple of 4)	
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (get_info_isdn_providers & read_isdn_providers):
-	read file in /usr/share and $prefix/usr/share 
-	(isdn_write_config): corrected file to be sh compliant.
-	(isdn_write_config): added default route settings for isdn.
-
-2000-09-20  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* pci_probing/pcitable: replace es1371 by snd-card-ens1371
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 
-
-2000-09-20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume 
-
-	* standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: used new package install function.
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (isFloppyOrHD): detects wether a device is a
-	floppy or not based on its size (for scsi floppy)
-
-	* Xconfigurator.pm (testFinalConfig): check if "server" OR
-	"driver" field is set (otherwise XF4 only card won't pass)
-
-	* bootloader.pm (suggest): fix for ``installing the last cooker
-	from kenobi:/I on an smp machine i don't get anymore an entry for
-	linux-up'' (c chmouel)
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])
-
-2000-09-20  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (get_pcmcia_devices): fix (especially, now ethernet
-	should be detected)
-
-	* lang.pm (get_langs): created, gives rpm install langs
-	* install_any.pm (setPackages): give langs::get_langs() to
-	readCompssList	
-	* pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
-	$langs instead. This fixes the RPM_INSTALL_LANG=all install.
-
-2000-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* netconnect.pm: make dhcp-client, pump and such not translatable.
-	Those are program names and should therefore not be translated,
-	that only confuses translators
-
-2000-09-19  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): corrected @users definition and
-	passwd cat.
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* many files: changed some access to get_root to get_root_	
-	
-	* install_steps_interactive.pm (choosePackages): added code for
-	desktop meta_class install type
-
-	* install_steps_gtk.pm (selectMouse): cleanup, give parameter
-	emulate3buttons to setMouseLive
-	* c/stuff.xs.pm (setMouseLive): add argument emulate3buttons
-
-2000-09-19  Guillaume Cottenceau <gc@mandrakesoft.com>
-
-	* interactive*.pm: changed `suspend' and `resume' to behave as expected,
-	added `enter_console' and `leave_console'
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
-	META_CLASS
-
-	* Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
-	result (not enough VideoRam), also remove the found resolutions
-	* Xconfigurator.pm (main): remove the automatic searching of
-	resolutions	
-	* Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
-	automatic searching of resolutions.
-
-	* mouse.pm (fullnames): changed the `_' in `[' before Other
-	(nicer, uh?)
-
-	* install2.pm (selectMouse): changed clicked to !first_time
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (testFinalConfig): remove the bloody prototype
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-18  Dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator (autologin): do it eve, if newbie. Autologin is
-	now in separated function.
-	
-2000-09-18  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (testFinalConfig): don't skip the test in auto
-	if called via "Test again"
-	* Xconfigurator.pm (resolutionsConfiguration): ensure all depth
-	are bounded
-
-	* bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
-	classic and no-fb
-
-	* fsedit.pm (check_mntpoint): add a check for /etc /lib... which
-	must not be mount points. Also check that /home, /tmp and /usr are
-	on trueFS
-
-	* interactive.pm (ask_from_entries_ref): add bounding of "val" in
-	case of type "range". die if min > max.
-
-2000-09-18  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): nicer
-	partition/device display
-
-	* partition_table_raw.pm (zero_MBR): add on the fly require of the
-	good partition_table_$type
-
-	* detect_devices.pm (cdroms): fix (yet again) the scd$nb device
-	assignment to ide burners
-
-	* install_steps.pm (afterInstallPackages): comment out a part of
-	the icons mess messing
-
-	* Xconfigurator.pm (cardConfiguration): move Unlisted to
-	Other/Unlisted
-	* share/CardsNames: updated (for Voodoo5)
-
-	* install_steps_gtk.pm (selectMouse): fix the test to know wether
-	the guy has changed the mouse type (to know wether to test the
-	mouse or not)
-
-	* install_steps_interactive.pm (selectLanguage): add the license
-	
-	* install_steps_interactive.pm (choosePackages): have the
-	"Recommended" size be the default 
-	(in the choice Minimum/Recommanded/Complete)
-	
-	* diskdrake.pm (Type): fix a typo
-
-	* install_steps.pm (doPartitionDisksAfter): mark partition as
-	mounted	
-
-2000-09-17  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-17  Pixel  <pixel@mandrakesoft.com>
-
-	* install/pcmcia_config.patch: cleaned
-	
-	* diskdrake.pm (Create, Type): have type field not_editable
-
-	* tools/make_mdkinst_stage2: use TMPDIR if available
-
-2000-09-16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): move
-	the setting of toFormat before asking for bad blocks, seems to fix
-	things?? weird :-/
-
-	* network.pm (miscellaneousNetwork): fix the setting of focus on
-	error (tx2Thomas Poindessous :)	
-
-	* install_steps_interactive.pm (configurePrinter): changed
-	"Cancel" to "None" (for Thomas Poindessous :)
-
-	* printer.pm (poll_ppd_base): max polling time raised from 10s to
-	30s (for Till)	
-
-	* install_steps.pm (ask_mntpoint_s): don't force partition type to
-	be ext2 (at least if it's a known fs) (for Warly)
-
-2000-09-15  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (set_help): save the help message displayed
-	in $o->{current_help}
-	* install_gtk.pm (create_big_help): display $o->{current_help}
-
-	* mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.	
-	* install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
-	* install2.pm (selectMouse): adapted for mouse::read now returning
-	an hash ref
-
-	* detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
-	one function (now takes the device in the parameter)
-
-	* interactive.pm (ask_from_treelistf): added (just like
-	ask_from_listf, but with a tree)
-
-	* Xconfigurator.pm: the reference is now nbuttons to
-	know wether to put Emulate3Buttons or ZAxisMapping.
-	* Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
-	Banshee too.
-
-	* Xconfig.pm: guess nbuttons based on Emulate3Buttons and
-	ZAxisMapping.
-
-	* common.pm (availableRamMB): replace availableRam, now use the
-	size of /proc/kcore (what else to find the real ramsize?)
-
-	* common.pm (cat__): created
-
-	* install2.pm (main): add field meta_class in $o. Can be
-	'desktop', in case option desktop is given, or if /desktop/i is
-	found in /VERSION
-
-	* install_steps.pm (miscellaneous): for lnx4win, always have
-	'mem=' (so that the initrd is visible by both windows
-
-	* install2.pm (main): add option "desktop"
-
-	* install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format
-
-	* install_interactive.pm (partitionWizardSolutions): 
-	use only TrueFS for existing_part
-	(partitionWizard): have only "loopback" for lnx4win
-
-	* pci_probing/pcitable: associate Voodoo5 with Voodoo5
-
-	* share/Cards+: add Voodoo5
-
-	* bootloader.pm (suggest): add entry linux-nonfb (called linux-up
-	for smp)
-
-2000-09-14  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-12  François Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm, mouse.pm: moved probing serial port before to
-	detect a wacom tablet (even if a PS/2 or USB mouse is found).
-	* help.pm: corrected reference to previous version of LM (jloup).
-	* install2.pm: removed duplicate code for getting network
-	configuration, using network module.
-	* netconnect.pm: intf is now a hash and no more an array.
-	* network.pm: changed nature of intf to hash from array, reworked
-	write_resolv_conf function to keep old code in comment but only
-	when not used anymore (to make it easier by hand modification).
-	* printer.pm: SOCKET accessible to expert only (jloup).
-	* printerdrake.pm: local port only available for expert if a
-	printer has been detected (jloup).
-
-2000-09-11  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: reorganized choices of 3D optimizations, added
-	experimental support for expert users.
-	* install_steps_interactive.pm: removed question to keep XF3.
-
-2000-09-05  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: removed all previous URI specific mode and
-	added socket and expert URI general mode.
-	* printer.pm: fixed bugs, start lo interface before cups.
-
-2000-09-04  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added pnm2ppa and lm110 support in cups
-	configuration. probe for printer device (parallel) and try to
-	install usb for printer.
-	* printer.pm: removed local printer configuration for cups (keep
-	only local configuration using URI).
-
-2000-09-01  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
-	is installed, make 16bits by default on 3D hardware acceleration,
-	fixed selection of hardware for hardware acceleration.
-	* install_steps.pm: add cups for printer configuration, used for
-	auto_install. added new function to add packages only if requires
-	are already satisfied.
-	* standalone/printerdrake: updated.
-
-2000-08-31  dam's  <damien@mandrakesoft.com>
-
-	* moved many things to network.pm and any.pm
-	* everything should be broken now.
-
-2000-08-31  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: removed printer default config (now obsoleted).
-	* install_steps_interactive.pm: add cups support.
-	* printerdrake.pm: add cups support.
-	* printer.pm: add cups support.
-
-2000-08-31  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* install_any.pm (setPackages): install the right glide module
-	according to the Voodoo card detected.
-
-	* Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
-	(autoDefaultDepth): default depth to 16 for Voodoo cards except
-	for Voodo5 ones.
-
-2000-08-29  dam's  <damien@mandrakesoft.com>
-
-	* moved pppConfig in netconnect.pm and any.pm
-	* moved miscellaneousNetwork in any
-	* modem configuration is now useable in standalone mode.
-
-2000-08-29 David BAUDENS <baudens@mandrakesoft.com>
-
-	* install_steps_interactive.pm: change Small/Normal/Full ->
-	  Minimum/Recommanded/Complete (aka make FredB happy)
-
-2000-08-28  dam's  <damien@mandrakesoft.com>
-
-	* draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
-	and french alcatel ADSL implemented.
-	* Xconfigurator.pm (autologin) : use of the new autologin system.
-
-2000-08-24  François Pons  <fpons@mandrakesoft.com>
-
-	* ../update_kernel*: changed reference from extract_archive to
-	packadrake.
-	* Makefile*: added live_install and live_install2.
-	* Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
-	Pro AGP card type, commented SiS and S3ViRGE support by GLX.
-	* commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
-	updated to use packdrake now.
-	* install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
-	manage live upgrade.
-	* modules.pm: use standard modprobe command for load in live
-	upgrade.
-	* netconnect.pm: added minimal modification for being compilable.
-	* rescue/list: added packdrake and sfdisk.
-	* live_install, live_install2: live upgrade of package.
-
-2000-08-22  dam's  <damien@mandrakesoft.com>
-
-	* drakfuck (netconnect):finished isdn PCI/ISA card implemetation
-	* added isdndb.net: providers database
-
-2000-08-20  dam's  <damien@mandrakesoft.com>
-
-	* moved Netconnect.pm to netconnect.pm
-	* moved DrakFuck to drakfuck
-
-2000-08-18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/Cards+: for i810, force VideoRam
-
-2000-08-18  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: added isdn type in @drivers_by_category. corrected
-	load_thiskind (thx pixel) : it's not unsafe anymore
-	* Netconnect.pm: just display PCI isdn card recognized.
-	
-2000-08-17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: many cleanup. moved some functions to common,
-	any or install_interactive (newly created)
-
-2000-08-16  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm(configureNetwork): added call to
-	isdn configuration
-	* added standalone/DrakFuck: standalone entry point to configure
-	internet connexion.
-	* added Netconnect.pm: internet connexion functions.
-
-2000-08-11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectInstallClass): yet a bigger
-	warning so that people don't choose expert installs. Also set the
-	focus on "Custom" by default.
-	
-	* install_steps_interactive.pm (doPartitionDisks): created, calls
-	the wizard.
-	* install_steps.pm (doPartitionDisksBefore,
-	doPartitionDisksAfter): created (was mainly in
-	install2::doPartitionDisks)
-	* install2.pm (doPartitionDisks): much cleanup
-	* install_any.pm (partitionWizard): working state (still rough)
-
-2000-08-08  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
-	cdrom addmedia
-
-2000-08-07  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Resize): 
-	* install_steps_gtk.pm (doPartitionDisks): remove the
-	before_leaving ensuring the filehandle is closed
-	* resize_fat/main.pm (DESTROY): use a better solution for ensuring
-	the filehandle is closed
-
-2000-08-07  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added SiS6326 in the list of chipset that
-	needVideoRam, reported on ml.
-	* install_steps.pm: fixed auto install of printer.
-
-2000-08-06  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf): created this GREAT function
-	that should have been created a long time ago.
-	* any.pm, install_any.pm, install_steps_gtk.pm,
-	install_steps_interactive.pm: a lot of rewrite to use the new
-	ask_from_listf, a lot of nice cleanup!
-
-	* fs.pm (df): created, returns the free space of the part. Save it
-	in $part->{free}
-
-	* install_steps_gtk.pm (doPartitionDisks): ensure the closing of
-	the device in case of error
-	* resize_fat/main.pm (new): ensure the closing of the device in
-	case of error
-
-	* install_any.pm (partitionWizard): the great partitioning wizard
-	is created. Not finished yet (nor called from anywhere)
-
-	* install_steps.pm (doPartitionDisksLnx4win): created function out
-	of doPartitionDisks
-
-	* install_steps_gtk.pm (installPackages): removed the displaying
-	of size to install (people are bothered cuz not the same size)
-
-2000-08-06  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_steps_window): use drawing area
-	instead of button. Implemented all steps events. 
-
-2000-08-05  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): test a hack for usb mouse via hub
-	(sparhawk@enteract.com)	
-
-	* fsedit.pm (undo): force isDirty and needKernelReread only if hd
-	hasBeenDirty, otherwise believe the flag saved
-	* partition_table.pm (write): flag hd as hasBeenDirty
-
-	* install2.pm: a few renaming of methods so that the step names
-	correspond to install2 function and install_steps* methods (eg:
-	configureX & setupXfree unified to configureX)
-
-2000-08-04  dam's  <damien@mandrakesoft.com>
-
-	* any.pm (setAutoLogin): added this method to write xdm-config
-	* Xconfigurator.pm: clenead autologin code and use of above method
-
-2000-08-04  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
-	it in case of max_size reached. only purpose is the log!
-
-	* install_steps_interactive.pm (choosePackages): in newbie, ask
-	between Small/Medium/Full install
-	* install_steps_interactive.pm (choosePackages): in expert, have
-	the min_mark be 0 instead of 1
-
-	* common.pm (find_index): added this nice function
-
-	* install_any.pm (getAvailableSpace_mounted): use common::df
-	* loopback.pm (getFree): use common::df
-	* commands.pm (df): use common::df
-	* common.pm (df): added
-
-	* diskdrake.pm (Resize)): add resizing of reiserfs
-	* share/list.i386: add resize_reiserfs
-
-
-2000-08-02  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm : autologin is functionall. When wmsession.d is
-	more up to date, I'll add the list of wm to launch at boot. It
-	writes in /etc/X11/xdm/xdm-config.
-	
-2000-08-01  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (miscellaneous): modify as chmouel want (aka, ""
-	instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)
-
-	* services.pm: separation between interaction and action.
-	* install_steps.pm (servicesConfig): the job is now done here	
-	* install_steps_interactive.pm (servicesConfig): only the asking
-	part	
-
-2000-08-01  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed the below fixe, now ok.
-	* Xconfigurator.pm: fixed a bug for using default card flags
-	setting, add support for GeForce DDR for both 3.3 and 4.0.
-	* pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
-	XFree 3.3 as unsupported in XFree 4.0.
-	* share/Cards+: added "NVIDIA GeForce2 DDR (generic)".
-
-2000-07-31  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed provided package with choice in deps used with a
-	base package, complicated but kernel-fb or similar can be
-	unselected now.
-
-2000-07-27  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: changed expert message to ask
-	using XFree 3.3 instead of XFree 4.0 used by default (server).
-	* Xconfigurator.pm: make sure only one server is installed,
-	default to XFree 4.0 if supported unless XFree 3.3 accept
-	3D acceleration and not XFree 4.0, ask user in such case.
-	* pci_probing/pcitable: added Intel 815 pci ids.
-
-2000-07-26  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: applied new LN stars, logo title and help
-	logo. improved steps appearences.
-	* modified share/step-*.xpm
-	* added share/help.xpm
-	* updated ../HACKING to ling help logo.
-
-2000-07-21  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: enable 3D acceleration configuration with
-	XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
-	Utah-GLX accelerated module.
-
-2000-07-20  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
-	{miscellaneous}{autologuser} + {miscellaneous}{autologing}.
-	* move some README content to ../HACKING
-
-2000-07-19  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: added autologin boxes.
-	result is in {miscellaneous}{autologin} and in
-	{miscellaneous}{autologuser}
-	
-2000-07-19  François Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: added default root to existing root device when adding
-	an entry in bootloader.
-	* bootloader.pm: avoid duplicating entry (floppy and old-floppy)
-	when they are identical.
-	manage hackkernel by suggest an entry by default if installed.
-	* install_steps.pm: reworked symlink closure for bootloader
-	to keep previous configuration.
-
-2000-07-11  François Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
-	this include a configure_entry from silo.pm to build a initrd if
-	used.
-	* share/compssList: added kde2 packages.
-	* share/compssUsers: added kde2 group, renamed kde to kde1 group
-	specific.
-
-2000-07-07  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm (choosePackages): always execute setPackage to copy
-	hdlist* and depslist files (support mixed partitionDisks and
-	choosePackages).
-	* install_any.pm (setPackages): avoid clearing upgrade flag.
-	* install_steps.pm (choosePackages): use $first_time to avoid
-	reselection of packages according to compssList.
-	* install_steps_interactive (choosePackages): use $first_time and
-	$individual to avoid reselection of packages according if user go
-	back to step choosePackages.
-	* pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
-	depslist files in /var/lib/urpmi.
-	* diskdrake.pm: fixed uneditable combo for Mount point action.
-
-2000-06-23  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: better approach for Sun* server in newbie.
-	* fs.pm: added romfs support for mount.
-	* fsedit.pm: changed auto allocation for partitions for sparc*.
-	* install2.pm: restored bootdisk creation and auto install boot
-	disk creation for sparc*.
-	* install_any.pm: changed vfat to romfs when mounting kickstart
-	floppy on sparc*.
-	* install_steps.pm: avoid proposing formating sunos partition.
-	* install_steps_interactive.pm: boot disk for sparc* and support for
-	installation of SILO on /boot partition (sparc*).
-	* install_steps_newt.pm: removed cylinder 0 bug warning.
-	* interactive.pm: fixed typo for not_edit set to 1 by default.
-	* partition_table.pm: fixed get_holes on sparc* where a whole disk
-	partition caused problems.
-	* partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
-	* silo.pm: handle /boot partition, install silo.conf in /boot and
-	make a symlink from /etc.
-	* share/list.sparc: added losetup and genromfs for boot disk creation.
-
-2000-06-21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: changed the way console font data is written; not all
-	of the [0], [1], [2] values must defined, so three cases must be used.
-	Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
-	be used by console-tools to load the proper compose table
-
-2000-06-20  François Pons  <fpons@mandrakesoft.com>
-
-	* c/sbus.c: added some functions for silo.c integration.
-	* c/silo.c: initial release including write in prom, and translation
-	of disk name from openprom to linux, rh version modified.
-	* silo.pm: added write in prom, support of sunos boot from silo.
-	* partition_table.pm: added support for ufs partition like windows one.
-	* install_steps_interactive.pm: added other entries in silo.
-	* install_steps.pm: support sunos partition.
-	* install_any.pm: automatically mount sunos partition with diskdrake.
-	* fsedit.pm: added /mnt/sunos suggested mount point.
-	* fs.pm: added ufs support for mount.
-
-2000-06-19  François Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: modified for getting sparc crypto file for sparc*.
-	* modules.pm: make sure to load sd_mod when needed.
-	* pci_probing/main.pm: always use loaw_endian in pci structs.
-	* pci_probing/translate-pcitable.pl: added arch specific module name
-	translation.
-
-2000-06-16  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): rename conf.modules to modules.conf if
-	needed. Outputs to modules.conf
-
-	* detect_devices.pm (cdroms): fix using scd0 for ide-burners when
-	already a scsi cdrom drive
-
-2000-06-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* pkgs.pm: added 'acon' requirement for all right-to-left languages
-
-2000-06-07  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: added SunOS partition as blue for diskdrake.
-	* install_steps_interactive.pm: make sure of no division by zero may
-	happen.
-	* install_steps_newt.pm: added WARNING for fdisk on sparc*.
-	* modules.pm: make sure of loading sd_mod module after any scsi module.
-	* sbus_probing/main.pm: insmod openprom before trying sbus probing.
-	* pkgs.pm: corrected by use of parabolic solution for size approximation.
-	* silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.
-
-2000-06-05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* install_steps.pm,lang.pm: added load_console_font, to load the 
-	proper console fonts (text mode install is not very useful otherwise)
-
-2000-06-03  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
-	* diskdrake.pm (Type): don't accept less than 32MB part for reiserfs
-
-2000-06-01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
-	it fits better with the other fonts. Added a 'README' file with
-	some comments and the required copyright notice
-
-2000-05-29  François Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added support for SBUS card autodetection.
-	* commands.pm: added lssbus to list SBUS devices detected.
-	* detect_devices.pm: removed alpha restriction on USB.
-	* install_steps_interactive.pm: added SBUS support.
-	* c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
-	* c/stuff.xs.pm: added wrapper for sbus.c interface.
-	* sbus_probing/main.pm: initial revision (inspired from kudzu).
-
-2000-05-27 Adam Lebsack <adam@mandrakesoft.com>
-
-	* share/list.ppc: various PPC modifications, for HFS
-	* partition_table_mac.pm: bug fixes
-	* partition_table.pm: various HFS fixes, isHiddenMacPart()
-	* diskdrake.pm: added HFS to top buttons when run on PPC
-	* keyboard.pm: fixed name of mac-fr2-ext keymap
-	* install_steps_gtk.pm: added Xpmac server support for PPC.
-	* install_steps_interactive.pm: disallow hardware configuration on PPC for
-	now.  All drivers should be in the kernel. setup_this_kind().
-	* fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
-	our partition table read.  Added PPC grep condition for PPC in get_visible_fstab.
-	* fs.pm: fix argument for HFS formatting.	
-	* Makefile: special installation of PPC files.
-
-2000-05-25  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
-	alpha|sparc.
-
-2000-05-25  François Pons  <fpons@mandrakesoft.com>
-
-	* silo.pm: added configure_entry to try creating an initrd for an image
-	entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
-	* commands.pm: fixed insmod command to take modules64.cz* on sparc*
-	* install2.pm: removed create boot disk and create auto install disk on
-	sparc*. force writing of /etc/conf.modules for step setupBootloader.
-	* install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
-	* install_steps_interactive.pm: added missing $prefix for glob_. call
-	configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
-	* modules.pm: updated alias for sparc*.
-	* any.pm: fixed proprable wrong test for setupBootloader in beginner at
-	the very beginning.
-	* printer.pm: fixed typo.
-	* Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
-	resolution for these server too.
-
-2000-05-24  François Pons  <fpons@mandrakesoft.com>
-
-	* partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
-	* partition_table_sun.pm: fixed a bug when reading partition table
-	with unused partition in the middle of the table.
-
-2000-05-23  François Pons  <fpons@mandrakesoft.com>
-
-	* common.pm: update arch to take into account sparc and sparc64. added
-	better_arch and compat_arch function.
-	* silo.pm: fixed adding new kernel automatically.
-	* install2.pm: removed create boot disk stuff for sparc*.
-	* install_steps.pm: added initrd generation for alpha. added ldconfig
-	at end of installation. removed /usr/bin/dumpkeys existence test on
-	sparc*, should be added in the future.
-	* install_steps_interactive.pm: removed supermount for sparc*.
-	* install_steps_gtk.pm: added /dev/kbd device creation and permedia2
-	support for sparc*. removed screen limit of 1024x768.
-	* detect_devices.pm: fixed problem on machine with really no IDE interface.
-	* modules.pm: added support for 32 and 64 bit architectures on sparc*.
-	* install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
-	partition.
-	* pkgs.pm: added support for multi-arch rpm file (need for sparc*),
-	fixed correctSize and invCorrectSize to take back a linear approximation
-	above 9Gb approximatively. removed ftp rewind as broken currently.
-	* keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
-	globing (removed) against existing '*'.
-	* partition_table.pm: removed support for non SUN partition table, as it
-	may freeze the kernel or may be blanked?
-	* Xconfigurator.pm: take Sun24 server by default on sparc*, add support
-	for permedia2 card (3DLabs server).
-	* share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
-	* Makefile: added support for modules and modules64 for sparc*.
-	* c/stuff.xs.pm: added kernel_arch function for getting the current true
-	architecture provided by the kernel (uname -m).
-
-2000-05-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): the URL link to doc must
-	be $lang/index.html, not only $lang.
-
-	* standalone/mousedrake: add handling of XF86Config-4
-
-	* any.pm (setupBootloader): fix bug (was adding 2 glob_'s)
-
-2000-05-08  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the touch of some files here to please linuxconf
-	
-	* install2.pm (miscellaneous): s/KBD/KEYBOARD/
-
-	* lilo.pm (install_grub): don't keep symlinks for reiserfs
-	* lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)
-
-	* install_any.pm (getHds): default mount point for windobe in
-	lowercased for StartOffice(!)
-
-2000-05-08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
-	  Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
-	* keyboard.pm: Added new Lithuanian keyboard and changed the
-	  string for brazilian ABNT-2 to state more clearly its ABNT nature
-	  (it is not a standard PC keyboard; it uses some different keycodes)
-
-2000-05-07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): return availableCorrected
-	instead of available
-
-	* pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)
-
-	* modules.pm (text2driver): same as text2lang below
-	* keyboard.pm (text2keyboard): same as text2lang below
-	* lang.pm (text2lang): replace the while (... each) by a foreach
-	(keys) (because each is dangerous if loop is exited)
-
-	* install_steps_interactive.pm (selectKeyboard): better handling
-	of multiple langs question.
-
-	* ftp.pm (new): Timeout set to 60 (seconds), was default (120)
-
-	* install_steps_interactive.pm (setup_thiskind): remove ide-*
-	from modules displayed as loaded.
-
-2000-05-06  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (check_mntpoint): verify that standard mntpoints (/
-	/usr) are not on not trueFS
-
-	* any.pm (setupBootloader): add $prefix for the 2 glob_'s
-
-2000-05-07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua
-
-2000-05-06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* printerdrake.pm: fixed English error
-
-2000-05-05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): remove the special case
-	for fbdev.
-
-	* install_steps_interactive.pm (setup_thiskind): replace return by
-	next in case load_module fails.
-
-	* install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade
-
-	* Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
-	* Xconfigurator.pm (testFinalConfig): force $bad_card for xf4
-
-	* pkgs.pm (correctSize): updated for 7.1
-
-	* install_any.pm (getAvailableSpace): move the removing of
-	$minAvailableSize here.
-
-2000-05-04  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (configurePrinter): give clicked to printerConfig
-
-	* interactive.pm (ask_from_entries_ref): set default val if not_edit
-
-	* interactive_newt.pm (ask_from_entries_refW): remove setting of
-	default val. Now done in interactive::ask_from_entries_ref
-
-	* interactive_gtk.pm (ask_from_entries_refW): handle empty value
-
-	* modules.pm (read_already_loaded): ensure that already loaded
-	modules are put in %loaded.
-	* modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)
-
-	* lilo.pm (install_lilo): truncate label's to 15 chars
-
-	* install_any.pm (generate_ks_cfg): fix missing space
-	* install_any.pm (generate_ks_cfg): fix bug for nfs comand
-
-	* install2.pm: get rid of autoformat
-	* install_steps.pm (choosePartitionsToFormat): get rid of autoformat
-
-2000-05-03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (setupBootloader): replace ask_many_from_list by
-	ask_from_list for bootloader choice
-
-	* services.pm (drakxservices): stop immediately service if removed
-
-	* install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
-	* install_steps.pm (afterInstallPackages): touch some files to
-	please linuxconf
-
-2000-05-03  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: updated min size, fixed kppprc generation.
-	* install_any.pm: make sure postinstall-rpm is here before
-	erasing (avoid error on reboot only).
-
-2000-05-02  Pixel  <pixel@mandrakesoft.com>
-
-	* raid.pm (format_part): don't call raid::make if part is already
-	formatted (as raidstop fails)
-
-	* Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
-	more	
-
-	* install_steps_interactive.pm (setup_thiskind): make insmod'ing
-	fail a simple warning.
-
-	* Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
-	* share/MonitorsDB: take new one from RedHat
-
-	* standalone/drakboot: added kfloppy
-
-	* g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
-	not to have it)
-
-2000-05-01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): remove
-	NIS_server, use NIS instead
-	* install_any.pm (setAuthentication): remove NIS_server, use NIS instead
-
-	* standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist
-
-2000-04-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): fix yet another bug for
-	ttf from windobe handling
-
-	* install_steps_interactive.pm (selectInstallClass): hide beginner
-	mode in corporate. Display special help.
-
-2000-04-29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
-	text to be properly aligned (reported by Craig Chang
-	<craig_chang@taipei.siscomm.com.tw>)
-	* common.pm: now that po handling is correct, I changed the order
-	of reading variables so that it follows the standards ($LANGUAGE first)
-	* share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251
-
-2000-04-28  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps*.pm: added support for selection of package during
-	upgrade the same way it is done for installation. added check of
-	minimal size, abort else (at least let the user know about :-)
-	fixed crypto if no network interface available.
-	* install2.pm: fixed problem during upgrade that lost network
-	configuration.
-
-2000-04-28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_raw): don't call commands::insmod, do it in
-	place. Merge with load_multi
-
-	* install_steps.pm (afterInstallPackages): fix windobe ttfonts
-	symlinking	
-
-	* Xconfigurator.pm (cardConfiguration): load module agpgart for
-	i810
-	
-	* install_any.pm (getHds): changed the mount point setting for
-	windows partitions as device_windobe is not unique
-
-2000-04-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_steps_window): changed to adapt to
-	new hidden format
-
-	* install2.pm (@installSteps): changed the way hidden is handled.
-	Now it is a true perl expression (great power now)
-
-	* install_steps_gtk.pm (selectInstallClass1): update steps window
-	before asking normal/devel/server. Nicer!
-
-	* install_steps_interactive.pm (configureNetwork): when "Cancel"
-	pressed at network interface configuration do not skip all
-	configuration.	
-
-2000-04-26  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm (pppConfig): modified a lot, removed template
-	file for ifcfg and chat file.
-
-2000-04-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): use a fix width for
-	the tree column (so that the checkbox are always visible without
-	scrolling)	
-
-	* standalone/drakboot: drakfloppy and gfloppy are X only, no need
-	to propose them in console
-	
-	* install_any.pm (relGetFile): added auto_inst to files to get
-	from Mandrake/base
-
-	* install2.pm (main): changed auto_inst behaviour
-
-	* standalone/adduserdrake: fix a bug (s/$o/$in/g)
-
-	* interactive_newt.pm (ask_from_entries_refW): now handling
-	complete/changed/focus_out callbacks (at least more than before)	
-
-	* Newt/Newt.xs: added rough callback handling
-
-2000-04-25  François Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added support for PPA more easily, allow
-	printers entry using ppa driver event if pnm2ppa not installed,
-	install it if neccessary after.
-	* network.pm, install_steps.pm, install_steps_interactive.pm:
-	added support for stoping a network interface, usefull for ppp0 to
-	avoid using it too long.
-	* install_steps.pm: fixed missing local on pap_secrets file.
-
-2000-04-25  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (install): moved the generation of the keytable here. It
-	is used by both lilo & grub (lilo is not always installed as was
-	assumed)	
-
-	* common.pm (formatAlaTeX): remove bounding spaces
-
-	* pkgs.pm (setSelectedFromCompssList): remove the hack for min
-	mark 25 in beginner
-	* install_steps_interactive.pm (choosePackages): set $min_mark to
-	25 in beginner
-
-2000-04-24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setupXfree): add a yesorno
-	question for choosing between XF4 and XF3 in expert
-
-	* install_steps_gtk.pm (choosePackagesTree): enlarge the tree window
-
-	* install_any.pm (update_userkderc): make sure uid and gid are kept
-
-	* diskdrake.pm (Create): add Extended_0x85 as a choice for expert
-
-	* partition_table.pm (add_extended): handle a 3rd arg,
-	$extended_type to tell which kind of extended partition is wanted
-	* partition_table.pm (adjust_main_extended): in non-expert,
-	automatically set extended to linux-extended if there's only
-	linux-type partitions.	
-
-2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>
-
-	* install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
-	  and not for byte. RAM is expressed in megabytes -> MB
-
-2000-04-19  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed crazy mutli CD manipulation.
-	* printer.pm: fixed wrong prototype of print_pages.
-	* install2.pm: set version to 7.1 for crypto stuff.
-	* crypto.pm: commented ackbar crypto site.
-
-2000-04-17  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
-	linuxconf)	
-
-2000-04-14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): don't
-	ask about checking bad blocks for reiserfs, cuz not handled
-
-	* fs.pm (mount): reiserfs handling
-	* fs.pm (format_reiserfs): added
-	* fs.pm (write_fstab): add option "notail" for reiserfs if
-	the partition holds the kernel (/boot or /)
-
-	* partition_table.pm (isTrueFS): added, replaces most occurences
-	of isExt2
-
-2000-04-12  François Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: force installation step if package have been
-	selected on step choose packages.
-	* install_any.pm: protected against die in perl (setstep or
-	theme_changed).
-
-2000-04-11  François Pons  <fpons@mandrakesoft.com>
-
-	* resize_fat: added some limits verification.
-	* interactive_gtk.pm: corrected swap of arg with help adding.
-
-2000-04-10  François Pons  <fpons@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
-	which is used by printerdrake only. drops key bindings.
-
-2000-04-07  François Pons  <fpons@mandrakesoft.com>
-
-	* tools/serial_probe: obsoleting pnp_serial which is now replaced
-	by this one, taken from kudzu, really faster and probe all serial
-	devices at one time. modified to probe correctly modem :-)
-	* mouse.pm: updated to use serial_probe interface of
-	detect_devices.pm.
-	* detect_devices.pm: modified to use serial_probe, cache probed
-	devices to avoid reprobing.
-
-2000-04-06  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps.pm: added support
-	for peerdns options of ppp, so removed dns address unless expert.
-
-2000-04-05  François Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm, install_steps_interactive.pm, install2.pm,
-	install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
-	and depslist-crypto. dependancies are not supported but with a
-	simpler format of depslist file where closure are not done and
-	only package name are used for dependancies.
-	* pkgs.pm: added better support for multi CD manipulation,
-	including selection and refus.
-
-2000-04-04  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: modified selection packages from compssList by
-	incremental selection, much more quickly.
-	added selected medium for selecting a package.
-	* install_any.pm: refused media hash transfered to selected value
-	of media table.
-	@needToCopy list should only have package of default medium.
-
-2000-04-03  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (format_ext2): add options "-b 1024 -O none" for alpha
-
-2000-03-31  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: made changeMedium sub modification
-	permanent.
-	* pkgs.pm: modified upgrade to avoid use of header.
-
-2000-03-31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: some more choices for PPC keyboards
-
-2000-03-30  François Pons  <fpons@mandrakesoft.com>
-
-	* install2pm: added eval around loading af_packet and postinstall
-	copy of RPMS.
-	* devices.pm: added /dev/kdb for SPARC.
-	* install_any.pm: modified multi CD management, postinstall copy
-	of RPMS.
-	* install_steps_gtk.pm: added support for Xsun server for SPARC.
-	* install_steps_interactive.pm: added multi CD dialog box for
-	selecting CD available. Serialized ethernet configuration and ppp
-	configuration.
-	* pkgs.pm: added check for infinite recursion for bad depslist.
-	* printer.pm: better test for reparse of printerdb.
-	* Xconfigurator.pm: added support for Xsun server for SPARC.
-
-2000-03-30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): enhance tree selection
-
-2000-03-29  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (wait_messageW): add some padding (nicer)
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): created,
-	creates a floppy for auto installs.
-
-	* install_any.pm (generate_ks_cfg): created, generates stage1
-	ks.cfg file
-
-	* share/po/DrakX.pot: added special comment for grub entry
-
-2000-03-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): sort langs for
-	many-lang install
-
-	* mouse.pm (write): add WHEEL telling if a wheel mouse is there
-
-2000-03-28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added entries for all three Armenian keyboards
-
-2000-03-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (install_urpmi): full support for multi-hdlist's	
-
-	* pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
-	$prefix/var/lib/urpmi
-	* pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
-	fake name. Access via /tmp/$hdlist is given for non-fake name
-
-	* detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)
-
-2000-03-25  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm: updated to the new format of entries. It was an hash.
-	Now the key is field kernel_or_dev, and entries is an array.
-	
-	(get): added, it returns the entry using a kernel
-	   (needed because entries is no more a hash)
-
-	* install_steps_interactive.pm (setupLILO): adapted to the new format
-
-	* Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling	
-
-	* fsedit.pm (suggest_part): if suggested part contains a field
-	"hd", ensure the partition is created on this hard drive
-
-	* install2.pm (main): before leaving installation, remove
-	/var/lib/urpmi if urpmi not installed	
-
-	* diskdrake.pm (Resize): ext2resize to size $part->{size} instead
-	of $size
-
-2000-03-24  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (hasHPT): added. Now nice handling of hpt366
-	(ultra66) without rebooting and making special floppy :)
-
-	* lilo.pm (install_grub): much better grub configuration (better
-	than lilo's :pp)
-
-	* install_steps.pm (setupBootloaderBefore): remove entry floppy
-	for security > 3
-
-2000-03-23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectMouse): added, takes care of telling
-	the X server if the user changed the mouse type. Only done if
-	a serial mouse is chosen.
-
-	* install_steps_newt.pm (doPartitionDisks): add a call to
-
-	* mouse.pm (write): added "device=" in etc/sysconfig/mouse for
-	devfs (it looses the symlink /dev/mouse)
-
-2000-03-22  Pixel  <pixel@mandrakesoft.com>
-
-	* pci_probing/pcitable: replace Server:Rage128 by proper XFree entry
-
-2000-03-20  François Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm, fs.pm, install_any.pm: added supports for
-	LS-120 floppy drive and icons on desktop of KDE (untested).
-	* printer.pm, printerdrake.pm: added supports for PPA interface in
-	new rhs-printfilters, always enable "Print text as postscript"
-	option for such printers.
-
-2000-03-20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: changed XKB name for Swedish keyboard
-	  changed XKB names for Russian and German keyboards
-	  added a choice for "Croatian" keyboard
-	* share/compss{,List}: added various new locales-*, ispell-* 
-	  and netscape-* files. changed ppa to pnm2ppa.
-
-2000-03-17  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: added setup for all configured queue.
-	* install_steps_interactive.pm: modified for retrieving packages
-	or current configuration.
-	* printer.pm: correction, tested retrieve of printer
-	configuration without printtool comments in printcap file: added
-	update of entry according to gsdriver used (untested again).
-	* printerdrake.pm: better handling of cancel, manage of multiple
-	queue definition together (as lp|My printer).
-
-2000-03-16  François Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved in printerdrake.pm the test
-	of printer usage.
-	* printerdrake.pm: heavy modification to handle multiple queue,
-	corrected some bugs too, added much more features as printtool.
-	* printer.pm: added more features for filter, allow printer to be
-	retrieved without help of printtool id in printcap file (untested).
-
-2000-03-14  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Loopback): handling of the file loopback: test
-	existence of the file and take its size.
-
-2000-03-14  François Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: corrected for duplicate file on other CD.
-
-2000-03-13  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (floppies): don't return hash but the device name
-
-2000-03-13  François Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: small correction for multiple media
-	installation.
-	* tools/syncrpms: added for handling synchronisation of multiple source
-	rpm directories (and multiple target), include cleaning.
-	* tools/closurepkgs: tools to get rpm that may be installed by DrakX
-	after normal packages installation (printer, network, X11...), may
-	be used to duplicate on other CD some important stuff of the first
-	one.
-
-2000-03-12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): compute the
-	max_size very simply (sum of all package sizes), otherwise too costly
-
-	* pkgs.pm (install): call cleanHeaders at the end
-	* pkgs.pm (cleanHeaders): created
-
-	* install2.pm (miscellaneous): /etc/msec/init.sh is now
-	/usr/sbin/msec (yoann thanks for not telling :pp)
-
-	* pkgs.pm (install): remove the $prefix of mountpoints for not
-	enough room to install error message
-
-2000-03-11  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (_create_window): add callback on focus to
-	ensure_focus. The result is no more 3 focus states with 2 buttons.
-
-	* interactive_gtk.pm (ask_from_treelistW): better keyboard handling
-
-	* raid.pm (make): check the result of mkraid. Suggest raidtools
-	are missing in standalone diskdrake
-
-	* devices.pm (set_loop): created, searches for an available
-	loopback and sets the file to it
-
-	* lilo.pm (dev2grub): fixed a missing slash
-
-	* interactive_gtk.pm (wait_message_nextW): do not update if same
-	message, otherwise silly gtk won't do anything and we'll wait
-	forever :(
-
-2000-03-10  François Pons  <fpons@mandrakesoft.com>
-
-	* *.pm: heavy modification to take into account multiple media
-	installation.
-
-2000-03-10  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (@install_classes): cleanup, no more i18n (is now in
-	install_steps_interactive), remove old entries
-
-2000-03-09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): don't add alias block-major-11 in every case
-	* modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)
-
-	* fs.pm (format_*): move the @options before the device
-
-	* loopback.pm: created, added a lot of stuff for loopback in
-	diskdrake.pm, fs.pm...
-
-2000-03-08  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: %type2fs replaced ox402 by 0x402
-
-	* detect_devices.pm (cdroms): fix "scd" (should be "scd0")
-
-	* install_any.pm (install_urpmi): update for new hdlist.cz2
-
-2000-03-07  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/
-
-	* install_steps_interactive.pm (addUser): force add a normal user
-	for security 4
-
-2000-03-05  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
-	(tis the Gtk-Perl 0.7002 was of doing)
-
-2000-03-04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): add ide-floppy to the modprobes of
-	post-install supermount
-
-2000-03-03  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (ps): add RSS to ps command
-
-2000-03-02 Adam Lebsack <adam@mandrakesoft.com>
-
-	* mouse.pm: added mac mouse detection to mouse::detect.
-	* detect_devices.pm: added a routine to probe /dev/usbmouse on macs.
-
-2000-03-01  François Pons  <fpons@mandrakesoft.com>
-
-	* *.pm: heavy modification to take into account smaller
-	transaction during installation.
-	still a lot of test to perform, no provides updated currently and
-	building of hdlist.cz2 and depslist.ordered need old files...
-	nothing done for hdlist.gz during post installation, but
-	hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
-	installation of packages as extract_archive need a true file].
-
-2000-03-01  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (install_grub): creation
-
-	* network.pm (write_interface_conf): ONBOOT = !pcmcia
-
-	* install_steps_gtk.pm (new): more intelligent SIGCHLD handler
-
-2000-02-29  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: moved common network stuff from "net" to "network"
-	(modules like nfs lockd...)
-
-	* fs.pm (write_fstab): moved the sort to the right place
-
-	* services.pm (drakxservices): chkconfig --list is i18n'ed :(
-	set LANGUAGE=C before
-
-	* partition_table_raw.pm (get_geometry): geom{cylinders} must not
-	be a decimal value :)
-
-	* install_steps_gtk.pm (create_logo_window): set_name logo for
-	logo window
-	* share/install.rc: force disabling of background image theme
-
-	* install_steps_gtk.pm (enteringStep): add step information for
-	console 1
-
-	* any.pm (addKdmIcon): new function
-	* install_steps.pm (addUser): handle field icon
-	* install_steps_interactive.pm (addUser): add choice of kdm icon
-	* standalone/adduserdrake: add choice of kdm icon
-
-	* diskdrake.pm (ask_all_data...): change for easier i18n
-
-	* install_steps.pm (miscellaneous): add CLEAN_TMP handling
-	(need cleaning?)
-	* install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
-	option in expert
-	* install2.pm (miscellaneous): add CLEAN_TMP option for
-	/etc/sysconfig/system	
-
-	* install_steps_interactive.pm (miscellaneous): forbidden
-	useSupermount if high security.	
-
-	* mouse.pm (detect): fix bug (ttyS instead of ttyS0)
-
-2000-02-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
-	svga and accel. SVGA also wants 16 bpp. added ugly modeline for
-	800x600.	
-
-	* partition_table_raw.pm (get_geometry): when the
-	HDIO_GET_IDENTITY fails, defaults to what GETGEO gave
-
-	* install2.pm (main): use modules::load_multi to increase boot
-	start time
-
-	* modules.pm (load_multi): added this function for loading many
-	modules at once.
-
-	* install_steps_gtk.pm (new): increase time before timeout
-
-	* detect_devices.pm (cdroms): change the device associated with
-	ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(	
-
-	* modules.pm (write_conf): sort scsi_hostadapter's
-
-2000-02-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): load ide-probe and the like in 'prereq' type
-	so no aliases are added to conf.modules
-
-2000-02-25  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm (make): small code cleanup
-
-	* partition_table_raw.pm (adjustEnd): more explicit error message
-
-	* fsedit.pm (allocatePartitions): fix a bug (size was getting too
-	big after each allocation) making adjustEnd cry
-
-2000-02-24  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (new): added the "new" method to initialize
-	windowheight for isStandalone
-
-	* install_steps_gtk.pm (new): returns undef in case no X server
-	works	
-
-	* install2.pm (main): moved the ejectCdrom from install_steps::END
-	to here
-	* install2.pm (main): fix the $SIG{SEGV} handler
-	* install2.pm (main): added a "try again" in text install if the
-	"new" fails
-
-	* install_steps_interactive.pm (createBootdisk): fix an error for
-	non fdX choice of floppy drive
-	
-	* install_steps_interactive.pm (setup_thiskind): remove the
-	"defined @l"
-
-2000-02-23  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (%suggestedPartitions): remove any /boot entries
-	* install2.pm (selectInstallClass): removed the special code to
-	/boot entries from suggestedPartitions for on non-intel (and it
-	was buggy :)
-	* fsedit.pm (@suggestions): remove the /boot entry
-	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
-	* fsedit.pm (suggest_part): remove the 1024 cylinder special case
-
-	* install_steps_interactive.pm (setupLILO): replace linear option
-	by lba32
-
-	* lilo.pm (suggest): add lba32 by default
-
-	* install_steps_interactive.pm (load_thiskind): moved the HPT
-	stuff to install_any::ultra66 and call it.
-	Add sound card configuration (3 lines :)
-
-	* my_gtk.pm and interactive_gtk: resize the list and tree based on
-	root window size
-
-	* install_steps_gtk: $width and $height goes $::rootwidth and
-	$::rootheight, also other dimensions goes global (main::)
-
-	* commands.pm (strings): replace the typo \{$n,} by {$n,}
-
-2000-02-23  François Pons  <fpons@mandrakesoft.com>
-
-	* build_archive, extract_archive: changed format of TOC to speed
-	up extraction of archive, now 5 to 6 times faster to read TOC :-)
-	
-2000-02-22  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: load "Cards" database only to translate NAME
-	to fields. Added file CardsNames created from Cards using
-	share/Cards2CardsNames. Kind of list of normalized NAMEs	
-
-	* MonitorsDB: replace the ` ' separator for vendor by `|'
-
-	* install_steps_interactive.pm (timeConfig): use ask_from_treelist	
-
-	* interactive_gtk.pm (ask_from_treelist): creation of
-	ask_from_treelist. Usage is just the same as ask_from_list with
-	one more argument (the separator eg: |, /)
-
-2000-02-21  François Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: fixed deadlock while trying to create partition
-	when available space is equal or less than 2 cylinders. fixed
-	Create action on corrupted partition by removing stalling window.
-	Blocked partition table writing if there are error by forcing user
-	to correct partition table.
-	* partition_table.pm: fixed typo in verifyParts with cdie, added
-	verifyParts on Resize action.
-	
-2000-02-21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_big_help): display the help in full
-	screen	
-
-	* my_gtk.pm (_create_window): add big help on F1
-
-	* common.pm (add2hash): now returns the first parameter
-
-	* mouse.pm (detect): really defaults to serial mouse
-
-	* interactive.pm: add ask_many_from_list_with_help and
-	ask_many_from_list_with_help_ref
-
-	* services.pm: creation, it handles what was in
-	standalone/drakxservices
-
-2000-02-18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (createXconf): added /dev/ (X wants
-	"/dev/psaux" and not "psaux")
-
-	* diskdrake.pm (Create): show start sector even for non-expert on
-	non-i386
-
-2000-02-16  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): add defaults to serial mouse
-
-	* install_steps_gtk.pm (createXconf): remove the defaults to
-	serial mouse
-
-2000-02-15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: "After %s partition %s," inlined otherwise does
-	not please pablo and translators...
-
-2000-02-14  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): hide start sector choice for non-expert
-
-2000-02-11  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm (get_geometry): do not use the cylinder
-	number given by HDIO_GETGEO cuz limited to 16bits. Compute using
-	the total_sectors using HDIO_GET_IDENTITY
-
-	* c/stuff.xs.pm: added total_sectors (gives the number of sector
-	of a drive)
-
-	* modules.pm (load): ignore error in loading prereq's
-	
-	* modules.pm (@drivers_by_category): rcpci instead of rcpci45,
-	z85230 added
-
-	* commands.pm (mount): add modules::load_deps otherwise the
-	fs::mount won't succeed insmoding vfat if needed
-
-2000-02-11  François Pons  <fpons@mandrakesoft.com>
-
-	* fixed diskdrake to handle limit case when creating and resizing
-	partition table, address size limit and start sector limit.
-
-2000-02-11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): add a callback on SEGV
-	-> message printed
-	-> that way, ENDs are called (otherwise skipped)
-
-	* install_steps_interactive.pm (setup_thiskind): handles the undef
-	value returned by load_thiskind
-	
-	* install_steps_interactive.pm (exitInstall): do not call
-	install_steps::exitInstall
-
-	* install_steps (exitInstall): removed
-	* install_steps (END): added (it does ejectCdrom)
-
-	* install_steps_interactive.pm (load_thiskind): returns undef if
-	error loading a module
-
-	* fs.pm (format_part): changed the prototype from $;$@ to $;@
-	otherwise, @options always have a value (mostly undef) and mkdosfs
-	fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)
-
-	* install_steps_interactive.pm (setup_thiskind):
-	add a $auto_probe_pci that overrules $o->{auto_probe_pci}
-	(that way no pci probe the second time)
-
-2000-02-10  François Pons  <fpons@mandrakesoft.com>
-
-	* heavy modification of build_archive and extract_archive to manage
-	a TOC directly in archive file, handle bzip2 or gzip compression,
-	extract_archive can extract multiple files a time, with minimal
-	invocation of uncompress program and follow symlink and expand
-	directory contents.
-	* use build_archive/extract_archive for locales.
-	* fixed a min/max in install_steps_gtk for Resize/Create partition.
-	* fixed adjustEnd with dos partition table, take care of magic 63
-	sectors at beginning of partitions, a more solid method should be
-	used for that.
-
-2000-02-10  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_thiskind): skip modules "unknown" and "ignore"
-
-2000-02-09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (add): cdie if maximum number of partitions
-	handled by linux is reached
-
-	* Xconfigurator.pm (chooseResolutionsGtk): display the graphic
-	card or server found
-
-	* install_any.pm (relGetFile): for mdkinst files, take care not to
-	have a double '/' (see debbugs #591)
-
-	* install_steps_interactive.pm (configureNetwork):
-	purpose: add ability to configure both modem and lan
-	         clean up the behaviour
-
-	* fs.pm (write_fstab): 
-	purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
-	also: rewrite of the part writing the fstab. 
diff --git a/perl-install/Makefile b/perl-install/Makefile
deleted file mode 100644
index 6f0ba6759..000000000
--- a/perl-install/Makefile
+++ /dev/null
@@ -1,233 +0,0 @@
-PACKAGE=drakxtools
-PKGVERSION:=$(shell rpm -q --qf '%{VERSION}\n' --specfile $(PACKAGE).spec|head -1)
-RELEASE:=$(shell rpm -q --qf '%{RELEASE}\n' --specfile $(PACKAGE).spec|head -1)
-TAG := $(shell echo "V$(PKGVERSION)_$(RELEASE)" | tr -- '-.' '__')
-
-include Makefile.config
-
-POFILES   = $(shell ls share/po/*.po)
-MOFILES   = $(POFILES:%.po=%.mo)
-DISTFILES = Makefile Makefile.config Newt apps.net_monitor diskdrake c ddcprobe drakxtools.spec pam.net_monitor serial_probe share/po sbus_probing resize_fat share/diskdrake.rc $(STANDALONEPMS) standalone/icons pixmaps network standalone/interactive_http rpcinfo-flushed.c *.pm security harddrake
-OTHERS     = $(OTHERDIRS) $(OTHERFILES)
-OTHERDIRS  = tools/ddcprobe tools/serial_probe
-OTHERFILES = tools/rpcinfo-flushed.c
-
-.PHONY: all $(DIRS) install clean stage2 full_stage2 verify_c 
-
-all: list_modules.pm TAGS $(DIRS)
-
-list_modules.pm:
-	ln -sf ../kernel/list_modules.pm
-
-TAGS: $(ALLPMS)
-	etags -o - $^ /usr/lib/perl5/site_perl/*/MDK/Common/*.pm | ./perl2etags > $@
-
-clean:
-	for i in $(DIRS) share/po; do $(MAKE) -C $$i clean; done
-	rm -rf auto ../drakxtools.tar.bz2
-	find . -name "*~" -o -name ".#*" -o -name "TAGS" -o -name "*.old" | xargs rm -f
-
-check:
-	$(MAKE) -C share/po check
-	perl -I. -Mlang -e 'lang::check'
-	perl -I. -Mkeyboard -e 'keyboard::check'
-
-localcopy: clean
-	rm -rf standalone/pixmaps
-	$(MAKE) -C ../tools clean
-	cd .. ; rm -rf $(PACKAGE)-$(PKGVERSION) ; cp -af perl-install $(PACKAGE)-$(PKGVERSION) ; cp -af $(OTHERS) $(PACKAGE)-$(PKGVERSION)
-
-$(DIRS):
-	install -d auto
-	$(MAKE) -C $@
-
-test_pms: verify_c
-	for i in install2 install_steps_*.pm standalone/keyboarddrake standalone/XFdrake standalone/drakboot; do perl_checker -I. -no_cw -excludec -excludehelp -excluderesize_fat::c_rewritten -excludeMDK::Common::Globals -excludeCGI -excludestandalone -excludeurpm $$i; done
-	for i in install2 install_steps_*.pm; do perl -cw -I. $$i; done
-
-verify_c:
-	./verify_c $(ALLPMS)
-
-%.mo: %.po
-	msgfmt -o $@ $<
-
-install_pms: $(DIRS)
-	for i in `perl -ne 's/sub (\w+?)_? {.*/$$1/ and print' commands.pm` sync; do ln -sf commands $(DEST)/usr/bin/$$i; done
-
-	install -d $(DESTREP4PMS)
-	for i in $(PMS); do \
-		dest=$(DESTREP4PMS)/`dirname $$i`; \
-		install -d $$dest; \
-		perl -ne 'print' $$i > $(DESTREP4PMS)/$$i; \
-		perl -pe 's/#[-+].*//; $$_ = "\n" if (/^=head/ .. /^=cut/) || /use (diagnostics|vars|strict)/' $$i > $(DESTREP4PMS)/$$i; \
-	done
-	if [ "x$(PERL_INSTALL_DEBUG)" == "x" ]; then \
-		perl -pi -e 's|#!/usr/bin/perl -d.*\n|#!/usr/bin/perl\n|' $(DESTREP4PMS)/install2; \
-	else \
-		perl -pe 's|#!/usr/bin/perl.*\n|#!/usr/bin/perl -d \n|' install2 > $(DESTREP4PMS)/install2; \
-	fi \
-
-	rm -f $(DESTREP4PMS)/{bootlook,tinyfirewall}.pm
-
-	cp share/*.rc $(DESTREP4PMS)
-	chmod a+x $(DESTREP4PMS)/install2
-	chmod a+x $(DESTREP4PMS)/commands
-	chmod a+x $(DESTREP4PMS)/g_auto_install
-	chmod a+x $(DESTREP4PMS)/live_install*
-
-get_needed_files: $(DIRS) $(MOFILES)
-	$(MAKE) -C share
-
-#	export PERL_INSTALL_TEST=1 ; strace -f -e trace=file -o '| grep -v "(No such file or directory)" | sed -e "s/[^\"]*\"//" -e "s/\".*//" | grep "^/" | grep -v -e "^/tmp" -e "^/home" -e "^/proc" -e "^/var" -e "^/dev" -e "^/etc" -e "^/usr/lib/rpm" > /tmp/list ' $(PERL) -d install2 < /dev/null
-	eval `perl -V:version`; \
-	cat share/list `../tools/specific_arch share/list` | \
-	perl -pe "s/ARCH/$(ARCH)/g" | perl -pe "s/PERL_VERSION/$$version/g" > /tmp/list
-
-	@missing=`perl -lne 'print if !-e $$_' /tmp/list`; [ -z "$$missing" ] || { echo "missing files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$missing" ; echo "missing files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-
-	find auto -follow -name "*.so" >> /tmp/list
-
-	for i in $(LOCALFILES) `cat /tmp/list` ; do \
-		ldd $$i 2>/dev/null | grep "=>" | perl -pe 's/.*=> //; s/ .*//; s,^/lib/.*?/,/lib/,' | sort | uniq >> /tmp/list; \
-	done
-
-	perl -Mlang -I. -e 'print "$$_\n" foreach lang::console_font_files()' >> /tmp/list
-
-	install -d $(DEST)/etc
-	install -d $(DEST)/etc/sysconfig/network-scripts
-	install -d $(DEST)/lib
-	install -d $(DEST)/bin
-	install -d $(DEST)/usr/bin
-	install -d $(DEST)/usr/lib
-	install -d $(DEST)/usr/share
-	install -d $(DEST)/usr/share/gtk
-	install -d $(DEST)/usr/share/xmodmap
-	install -d $(DEST)/usr/X11R6/lib/X11
-	install -d $(ROOTDEST)/Mandrake/base
-	install -s $(LOCALFILES) $(DEST)/usr/bin
-#	cp -f $(LOCALFILES2) $(DEST)/usr/bin
-	ln -s ../X11R6/lib/X11 $(DEST)/usr/lib/X11
-ifeq (sparc,$(ARCH))
-	cp -a /usr/X11R6/lib/X11/xkb $(DEST)/usr/X11R6/lib/X11
-	rm -f $(DEST)/usr/X11R6/lib/X11/xkb/compiled
-	ln -s /tmp $(DEST)/usr/X11R6/lib/X11/xkb/compiled
-	ln -s /usr/X11R6/lib/X11/xkb/xkbcomp $(DEST)/usr/bin/xkbcomp
-endif
-ifeq (i386,$(ARCH))
-	install -s /sbin/cardmgr $(DEST)/usr/bin
-endif
-
-	for i in `cat /tmp/list`; do \
-	    if (echo $$i | grep -q "lib/[^/]*\.so"); then \
-	      install -s $$i $(DEST)/lib; \
-	    else \
-	      d=$$i; \
-	      (echo $$d | grep -q "^[^/]") && d="$(REP4PMS)/$$d"; \
-	      d=`echo $(DEST)/$$d | sed 's/\/usr\/local\//\/usr\//'`; \
-	      install -d `dirname $$d` && \
-	      if (echo $$i | grep -q "\.pm"); then \
-	    	 perl -pe '$$_ =~ /^__END__/ and exit(0);' $$i > $$d; \
-	      elif (echo $$i | grep -q "\.so"); then \
-	    	      install -s $$i $$d; \
-	      else \
-	    	      cp -f $$i $$d; \
-	      fi; \
-	    fi; \
-	done
-	mv -f $(DEST)/lib/libimlib-png.so $(DEST)/usr/lib
-
-#	# transform xpm's in png's
-	for i in $(DEST)/usr/share/icons/*.xpm; do convert $$i $${i%xpm}png; rm $$i; done
-
-	mv -f $(DEST)/bin/* $(DEST)/sbin/* $(DEST)/usr/bin
-	cd $(DEST)/usr/bin ; mv insmod insmod_
-	rmdir $(DEST)/bin $(DEST)/sbin
-
-	perl -ane 'symlink "$$F[1]", "$(DEST)/usr/bin/$$F[0]"' share/aliases
-
-ifeq (i386,$(ARCH))
-	cp ../tools/i386/busybox $(DEST)/usr/bin
-endif
-	ln -sf ash $(DEST)/usr/bin/sh
-
-	for i in fonts keyboards locales keymaps; do tar xfj `../tools/specific_arch share/$$i.tar.bz2` -C $(DEST); done
-
-	grep ChangeLog CVS/Entries > $(DEST)/usr/share/VERSION
-
-	gzip -9f $(DEST)/usr/share/ldetect-lst/*
-
-	cd share ; cp -a modparm.lst $(DEST)/usr/share
-	cd share ; cp -a consolefonts $(DEST)/usr/share
-	-cd share ; cp -f *.png *.xpm $(DEST)/usr/share
-	-cd pixmaps ; cp -f *.png *.xpm $(DEST)/usr/share ; rm -f $(DEST)/usr/share/wiz_*
-	cd share ; cp -a themes $(DEST)/usr/share/gtk
-	cd share ; cp compssUsers compssUsers.* rpmsrate $(ROOTDEST)/Mandrake/base
-
-	clean-rpmsrate $(ROOTDEST)/Mandrake/base/rpmsrate $(ROOTDEST)/Mandrake/RPMS*
-
-	for i in ../kernel/modules.description ../kernel/all.modules/modules.cz*; do cp -f $$i $(DEST)/lib/; done
-
-	$(MAKE) -C share/po install NAME=libDrakX LOCALEDIR=$(DEST)/usr/share/locale_special
-
-#	echo -e '#!/bin/sh\n\nexec "/usr/bin/sh"' > $(DEST)/usr/bin/runinstall2
-#	chmod a+x $(DEST)/usr/bin/runinstall2
-
-ifeq (i386,$(ARCH))
-	cp -a /etc/pcmcia $(DEST)/etc
-	../tools/patch_pcmcia_config.pl $(DEST)/etc/pcmcia/config ../kernel/all.modules/`cat ../kernel/all.kernels/.main`/modules.dep
-endif
-
-	find $(DEST) -name CVS | xargs rm -rf
-
-full_stage2:
-	if [ `id -u` = 0 ]; then rm -rf $(DEST); else $(SUDO) rm -rf $(DEST); fi
-	mkdir -p $(DEST)
-	$(MAKE) get_needed_files 
-	$(MAKE) stage2
-
-stage2:
-	$(MAKE) install_pms
-	$(ROOTDEST)/misc/make_mdkinst_stage2 $(DEST) $(ROOTDEST)/Mandrake/base/mdkinst_stage2
-
-# rules to build a test rpm
-
-localrpm: localdist buildrpm
-
-localsrpm: localdist buildsrpm
-
-localdist: cleandist localcopy tar
-
-cleandist:
-	rm -rf ../$(PACKAGE)-$(PKGVERSION) ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-tar:
-	cd ../$(PACKAGE)-$(PKGVERSION) && perl -pi -e 's/^C_RPM.*/C_RPM=0/; s/^C_DRAKX.*/C_DRAKX=0/' c/Makefile
-	cd ../$(PACKAGE)-$(PKGVERSION) && perl -pi -e 's/^all: help/all:/' share/po/Makefile
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -rf install* pkgs.pm help.pm ftp.pm http.pm crypto.pm t.pm debug.log `find -name CVS`
-	cd ../$(PACKAGE)-$(PKGVERSION) && mv -f Makefile.drakxtools Makefile
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -f list_modules.pm && cp -f ../kernel/list_modules.pm .
-	cd ..; tar cfj $(PACKAGE)-$(PKGVERSION).tar.bz2 $(patsubst %,$(PACKAGE)-$(PKGVERSION)/%,$(DISTFILES))
-	cd ..; rm -rf $(PACKAGE)-$(PKGVERSION)
-
-buildrpm:
-	rpm -ta ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-buildsrpm:
-	rpm -ts ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-# rules to build a distributable rpm
-
-rpm: cvstag dist buildrpm
-
-srpm: cvstag dist buildsrpm
-
-dist: cleandist export tar
-
-export:
-	cd ..; cvs export -d $(PACKAGE)-$(PKGVERSION) -r $(TAG) $(PACKAGE)
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -rf $(OTHERDIRS) && set -x && for f in $(OTHERDIRS); do cvs -d `cat ../CVS/Root` export -r $(TAG) -d `basename $$f` gi/$$f; done
-	cd ..; set -x && for f in $(OTHERFILES); do cvs -d `cat ../CVS/Root` export -r $(TAG) -d $(PACKAGE)-$(PKGVERSION) gi/$$f; done
-
-cvstag:
-	cvs tag $(CVSTAGOPT) $(TAG)
-	cd ..; cvs tag $(CVSTAGOPT) $(TAG) $(OTHERS)
diff --git a/perl-install/Makefile.config b/perl-install/Makefile.config
deleted file mode 100644
index fd03e45fb..000000000
--- a/perl-install/Makefile.config
+++ /dev/null
@@ -1,23 +0,0 @@
-# -*- Makefile -*-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
-VERSION     = 2.2.10-BOOT                                                                             
-SUDO        = sudo
-SO_FILES    = c/blib/arch/auto/c/c.so                                                                 
-PMS         = *.pm Newt/*.pm c/stuff.pm resize_fat/*.pm sbus_probing/*.pm network/*.pm diskdrake/*.pm harddrake/*.pm commands install2 g_auto_install live_install live_install2 share/advertising/*.pl
-STANDALONEPMS_ = diskdrake XFdrake mousedrake printerdrake logdrake keyboarddrake draknet drakbackup drakfont drakproxy localedrake net_monitor drakbug_report tinyfirewall drakxconf drakxservices draksec drakboot adduserdrake drakgw drakautoinst livedrake lsnetdrake scannerdrake fileshareset drakxtv drakfloppy harddrake2 drakTermServ service_harddrake drakbug
-STANDALONEPMS = $(STANDALONEPMS_:%=standalone/%)
-ALLPMS	    = $(PMS) $(STANDALONEPMS)
-REP4PMS     = /usr/bin/perl-install
-ROOTDEST    = /export
-DEST        = $(ROOTDEST)/Mandrake/mdkinst
-STAGE2      = $(ROOTDEST)/Mandrake/base/mdkinst_stage2
-BASE        = $(ROOTDEST)/Mandrake/base
-DESTREP4PMS = $(DEST)$(REP4PMS)
-PERL        = perl
-LOCALFILES  = $(patsubst %, ../tools/%,ddcprobe/ddcxinfos aewm-drakx/aewm-drakx serial_probe/serial_probe xhost+)
-DIRS        = c Newt resize_fat #po 
-CFLAGS	    = -Wall
-override CFLAGS  += -pipe
-
diff --git a/perl-install/Makefile.drakxtools b/perl-install/Makefile.drakxtools
deleted file mode 100644
index e5e7f4ae8..000000000
--- a/perl-install/Makefile.drakxtools
+++ /dev/null
@@ -1,62 +0,0 @@
-# -*- Makefile -*-
-include Makefile.config
-
-INLIBDEST_DIRS = Newt c resize_fat sbus_probing 
-HAVEINST_DIRS = share/po standalone/interactive_http
-DIRS = $(INLIBDEST_DIRS) $(HAVEINST_DIRS) ddcprobe serial_probe harddrake
-NAME = libDrakX
-PREFIX = 
-LIBDIR = $(PREFIX)/usr/lib
-DATADIR = $(PREFIX)/usr/share
-BINDEST = $(PREFIX)/usr/bin
-SBINDEST = $(PREFIX)/usr/sbin
-ETCDEST = $(PREFIX)/etc/gtk
-BINX11DEST = $(PREFIX)/usr/X11R6/bin
-LIBX11DEST = $(PREFIX)/usr/X11R6/lib/X11
-LIBDEST = $(LIBDIR)/$(NAME)
-PIXDIR = $(DATADIR)/$(NAME)/pixmaps
-INITDIR =  $(PREFIX)/etc/rc.d/init.d
-.PHONY: $(DIRS)
-
-all: rpcinfo-flushed $(DIRS)
-
-$(DIRS):
-	install -d auto
-	rm -f share/po/DrakX.pot # force rebuild of po's
-	[ ! -e $@/Makefile ] || $(MAKE) -C $@
-
-install:
-	mkdir -p $(BINDEST) $(ETCDEST) $(SBINDEST) $(DATADIR)/pixmaps $(LIBDEST)/{network,security,harddrake} $(BINX11DEST) $(LIBX11DEST) $(PIXDIR) $(INITDIR)
-	install -d $(INLIBDEST_DIRS:%=$(LIBDEST)/%)
-	install $(STANDALONEPMS) $(SBINDEST)
-	install -s rpcinfo-flushed ddcprobe/ddcxinfos serial_probe/serial_probe $(SBINDEST)
-	ln -s ../../$(patsubst $(PREFIX)/usr%,%,$(SBINDEST))/XFdrake $(BINX11DEST)/Xdrakres
-	ln -s fileshareset $(SBINDEST)/filesharelist
-	mv -f $(SBINDEST)/lsnetdrake $(BINDEST)/lsnetdrake
-
-	install -m 644 *.pm $(LIBDEST)
-	for i in network harddrake security; do install -m 644 $$i/*.pm $(LIBDEST)/$$i/;done
-	install -m 644 pixmaps/* $(PIXDIR)
-	install -m 644 share/diskdrake.rc $(DATADIR)/$(NAME)
-
-	install -d $(PREFIX)/etc/security
-	echo 'RESTRICT=yes' > $(PREFIX)/etc/security/fileshare.conf
-
-	install -m 644 $(patsubst %,Newt/%.pm,Newt) $(LIBDEST)/Newt
-	install -m 644 $(patsubst %,c/%.pm,stuff) $(LIBDEST)/c
-	install -m 644 $(patsubst %,sbus_probing/%.pm,main) $(LIBDEST)/sbus_probing
-	install -m 644 $(patsubst %,resize_fat/%.pm,main any boot_sector c_rewritten dir_entry directory fat info_sector io) $(LIBDEST)/resize_fat
-
-	install -d $(LIBDEST)/diskdrake
-	install -m 644 diskdrake/*.pm $(LIBDEST)/diskdrake
-
-	find $(LIBDEST) -name "*.pm" | xargs perl -pi -e '$$_ = "\n" if /\s*use\s+(diagnostics|vars|strict)/'
-
-	for i in $(HAVEINST_DIRS); do \
-		$(MAKE) -C $$i install PREFIX=$(PREFIX) DATADIR=$(DATADIR) NAME=$(NAME) ; \
-	done
-
-	find auto -follow -name .exists -o -name "*.bs" | xargs rm -f
-	cp -rfL auto standalone/icons $(LIBDEST)
-	mv $(LIBDEST)/icons/harddrake2/ $(DATADIR)/pixmaps/
-	mv $(SBINDEST)/service_harddrake $(INITDIR)/harddrake
diff --git a/perl-install/Newt/.cvsignore b/perl-install/Newt/.cvsignore
deleted file mode 100644
index c296b7faf..000000000
--- a/perl-install/Newt/.cvsignore
+++ /dev/null
@@ -1,6 +0,0 @@
-Newt.bs
-Newt.c
-pm_to_blib
-blib
-Makefile
-Makefile_c
diff --git a/perl-install/Newt/Av_CharPtrPtr.c b/perl-install/Newt/Av_CharPtrPtr.c
deleted file mode 100644
index f28fa6315..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.c
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include "Av_CharPtrPtr.h"  /* XS_*_charPtrPtr() */
-#ifdef __cplusplus
-}
-#endif
-
-
-/* Used by the INPUT typemap for char**.
- * Will convert a Perl AV* (containing strings) to a C char**.
- */
-char **
-XS_unpack_charPtrPtr( rv )
-SV *rv;
-{
-	AV *av;
-	SV **ssv;
-	char **s;
-	int avlen;
-	int x;
-
-	if( SvROK( rv ) && (SvTYPE(SvRV(rv)) == SVt_PVAV) )
-		av = (AV*)SvRV(rv);
-	else {
-		warn("XS_unpack_charPtrPtr: rv was not an AV ref");
-		return( (char**)NULL );
-	}
-
-	/* is it empty? */
-	avlen = av_len(av);
-	if( avlen < 0 ){
-		warn("XS_unpack_charPtrPtr: array was empty");
-		return( (char**)NULL );
-	}
-
-	/* av_len+2 == number of strings, plus 1 for an end-of-array sentinel.
-	 */
-	s = (char **)safemalloc( sizeof(char*) * (avlen + 2) );
-	if( s == NULL ){
-		warn("XS_unpack_charPtrPtr: unable to malloc char**");
-		return( (char**)NULL );
-	}
-	for( x = 0; x <= avlen; ++x ){
-		ssv = av_fetch( av, x, 0 );
-		if( ssv != NULL ){
-			if( SvPOK( *ssv ) ){
-				s[x] = (char *)safemalloc( SvCUR(*ssv) + 1 );
-				if( s[x] == NULL )
-					warn("XS_unpack_charPtrPtr: unable to malloc char*");
-				else
-					strcpy( s[x], SvPV( *ssv, PL_na ) );
-			}
-			else
-				warn("XS_unpack_charPtrPtr: array elem %d was not a string.", x );
-		}
-		else
-			s[x] = (char*)NULL;
-	}
-	s[x] = (char*)NULL; /* sentinel */
-	return( s );
-}
-
-/* Used by the OUTPUT typemap for char**.
- * Will convert a C char** to a Perl AV*.
- */
-void
-XS_pack_charPtrPtr( st, s )
-SV *st;
-char **s;
-{
-	AV *av = newAV();
-	SV *sv;
-	char **c;
-
-	for( c = s; *c != NULL; ++c ){
-		sv = newSVpv( *c, 0 );
-		av_push( av, sv );
-	}
-	sv = newSVrv( st, NULL );	/* upgrade stack SV to an RV */
-	SvREFCNT_dec( sv );	/* discard */
-	SvRV( st ) = (SV*)av;	/* make stack RV point at our AV */
-}
-
-
-/* cleanup the temporary char** from XS_unpack_charPtrPtr */
-void
-XS_release_charPtrPtr(s)
-char **s;
-{
-	char **c;
-	for( c = s; *c != NULL; ++c )
-		safefree( *c );
-	safefree( s );
-}
-
diff --git a/perl-install/Newt/Av_CharPtrPtr.h b/perl-install/Newt/Av_CharPtrPtr.h
deleted file mode 100644
index 765f1a731..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.h
+++ /dev/null
@@ -1,4 +0,0 @@
-char ** XS_unpack_charPtrPtr _(( SV *rv ));
-void XS_pack_charPtrPtr _(( SV *st, char **s ));
-void XS_release_charPtrPtr _(( char **s ));
-
diff --git a/perl-install/Newt/Makefile b/perl-install/Newt/Makefile
deleted file mode 100644
index cb80c5ab7..000000000
--- a/perl-install/Newt/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-Newt: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/Newt ; ln -s ../Newt/blib/arch/auto/Newt ../auto
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o
diff --git a/perl-install/Newt/Makefile.PL b/perl-install/Newt/Makefile.PL
deleted file mode 100644
index 6378a8f31..000000000
--- a/perl-install/Newt/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
-    'NAME'	=> 'Newt',
-    'OBJECT'    => 'Av_CharPtrPtr.o Newt.o',
-    'MAKEFILE'  => 'Makefile_c',
-    'OPTIMIZE'  => '-Os',
-    'VERSION_FROM' => 'Newt.pm', # finds $VERSION
-    'LIBS'	=> ['-lnewt -lslang'],
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-);
diff --git a/perl-install/Newt/Newt.pm b/perl-install/Newt/Newt.pm
deleted file mode 100644
index fdf9c0232..000000000
--- a/perl-install/Newt/Newt.pm
+++ /dev/null
@@ -1,16 +0,0 @@
-package Newt; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-use DynaLoader;
-
-use vars qw($VERSION @ISA);
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-bootstrap Newt $VERSION;
-
-package Newt::Component; # $Id$
-package Newt::Grid; # $Id$
-
-
-1;
diff --git a/perl-install/Newt/Newt.xs b/perl-install/Newt/Newt.xs
deleted file mode 100644
index fba7c5455..000000000
--- a/perl-install/Newt/Newt.xs
+++ /dev/null
@@ -1,478 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include <newt.h>
-
-static void suspend() {
-  newtSuspend();
-  raise(SIGTSTP);
-  newtResume();
-}
-
-static void componentCallback(newtComponent co, void *data) {
-  dSP;
-  PUSHMARK(SP);
-  perl_call_sv((SV *) data, G_DISCARD);
-}
-
-
-typedef newtComponent Newt__Component;
-typedef newtGrid Newt__Grid;
-
-
-MODULE = Newt		PACKAGE = Newt 	PREFIX = newt
-
-void
-DESTROY()
-	CODE:
-	{
-		newtFinished();
-	}
-
-int
-newtInit()
-
-int
-newtFinished()
-
-void
-newtCls()
-
-void
-newtSuspend()
-
-void
-newtResume()
-
-int
-newtCenteredWindow(width,height,title)
-	int width;
-	int height;
-	const char * title;
-
-void
-newtPopWindow()
-
-void
-newtRefresh()
-
-void
-newtPushHelpLine(text)
-	const char * text;
-
-void
-newtDrawRootText(row,col,text)
-	int row;
-	int col;
-	const char * text;
-
-void
-newtGetScreenSize()
-  PPCODE:
-{
-  int cols, rows;
-  newtGetScreenSize(&cols, &rows);
-  PUSHs(sv_2mortal(newSViv(cols)));
-  PUSHs(sv_2mortal(newSViv(rows)));
-}
-
-void
-newtSetSuspendCallback()
-	CODE:
-	{
-	  newtSetSuspendCallback(suspend, NULL);
-	}
-
-
-void
-newtWinMessage(title,buttonText,text)
-	char * title;
-	char * buttonText;
-	char * text;
-
-int
-newtWinChoice(title,button1,button2,text)
-	char * title;
-	char * button1;
-	char * button2;
-	char * text;
-
-int
-newtWinTernary(title,button1,button2,button3,message)
-	char * title;
-	char * button1;
-	char * button2;
-	char * button3;
-	char * message;
-
-void
-newtWinMenu(title,text,suggestedWidth,flexDown,flexUp,maxListHeight,list,def,buttons, ...)
-	char * title;
-	char * text;
-	int suggestedWidth;
-	int flexDown;
-	int flexUp;
-	int maxListHeight;
-	char **list;
-	int def;
-	char *buttons;
-        PPCODE:
-	{
-	  int button;
-#define nb 8
-#define a(i) SvPV(ST(i + nb),PL_na)
-	  button = newtWinMenu(title, text, suggestedWidth, flexDown, flexUp, maxListHeight, list, &def,
-			       items > nb +  0 ? a( 0) : NULL,
-			       items > nb +  1 ? a( 1) : NULL,
-			       items > nb +  2 ? a( 2) : NULL,
-			       items > nb +  3 ? a( 3) : NULL,
-			       items > nb +  4 ? a( 4) : NULL,
-			       items > nb +  5 ? a( 5) : NULL,
-			       items > nb +  6 ? a( 6) : NULL,
-			       items > nb +  7 ? a( 7) : NULL,
-			       items > nb +  8 ? a( 8) : NULL,
-			       items > nb +  9 ? a( 9) : NULL,
-			       items > nb + 10 ? a(10) : NULL, 
-			       NULL);
-#undef a
-	  EXTEND(SP, 2);
- 	  PUSHs(sv_2mortal(newSViv(button)));
- 	  PUSHs(sv_2mortal(newSViv(def)));
-	}
-
-MODULE = Newt		PACKAGE = Newt::Component 	PREFIX = newt
-
-void
-addCallback(co, callback)
-  Newt::Component co;
-  SV *callback;
-  CODE:
-  newtComponentAddCallback(co, componentCallback, callback);
-
-Newt::Component
-newtCompactButton(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-Newt::Component
-newtButton(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-Newt::Component
-newtCheckbox(left,top,text,defValue,seq)
-	int left;
-	int top;
-	const char * text;
-	char *defValue;
-	const char * seq;
-  CODE: 
-  RETVAL = newtCheckbox(left, top, text, defValue[0], seq, NULL);
-  OUTPUT:
-  RETVAL
-
-int
-newtCheckboxGetValue(co)
-	Newt::Component co;
-
-void
-newtCheckboxSetValue(co, value)
-	Newt::Component co;
-	char *value;
-  CODE: 
-  newtCheckboxSetValue(co, value[0]);
-
-Newt::Component
-newtLabel(left,top,text)
-	int left;
-	int top;
-	const char * text;
-
-void
-newtLabelSetText(co,text)
-	Newt::Component co;
-	const char * text;
-
-Newt::Component
-newtVerticalScrollbar(left,top,height,normalColorset,thumbColorset)
-	int left;
-	int top;
-	int height;
-	int normalColorset;
-	int thumbColorset;
-
-void
-newtScrollbarSet(co,where,total)
-	Newt::Component co;
-	int where;
-	int total;
-
-Newt::Component
-newtListbox(left,top,height,flags)
-	int left;
-	int top;
-	int height;
-	int flags;
-
-SV *
-newtListboxGetCurrent(co)
-	Newt::Component co;
-CODE:
-        RETVAL = SvREFCNT_inc(newtListboxGetCurrent(co));
-OUTPUT:
-	RETVAL
-
-
-void
-newtListboxSetCurrent(co,indice)
-	Newt::Component co;
-	int indice;
-
-void
-newtListboxSetWidth(co,width)
-	Newt::Component co;
-	int width;
-
-int
-newtListboxAddEntry(co,text,data)
-	Newt::Component co;
-	const char * text;
-	SV * data;
-CODE:
-	RETVAL = newtListboxAddEntry(co, text, data);
-OUTPUT:
-	RETVAL
-
-Newt::Component
-newtTextboxReflowed(left,top,text,width,flexDown,flexUp,flags)
-	int left;
-	int top;
-	char * text;
-	int width;
-	int flexDown;
-	int flexUp;
-	int flags;
-
-Newt::Component
-newtTextbox(left,top,width,height,flags)
-	int left;
-	int top;
-	int width;
-	int height;
-	int flags;
-
-void
-newtTextboxSetText(co,text)
-	Newt::Component co;
-	const char * text;
-
-void
-newtTextboxSetHeight(co,height)
-	Newt::Component co;
-	int height;
-
-int
-newtTextboxGetNumLines(co)
-	Newt::Component co;
-
-char *
-newtReflowText(text,width,flexDown,flexUp,actualWidth,actualHeight)
-	char * text;
-	int width;
-	int flexDown;
-	int flexUp;
-	int * actualWidth;
-	int * actualHeight;
-
-Newt::Component
-newtForm(vertBar,help,flags)
-	Newt::Component vertBar;
-	const char * help;
-	int flags;
-
-void
-newtFormSetSize(co)
-	Newt::Component co;
-
-Newt::Component
-newtFormGetCurrent(co)
-	Newt::Component co;
-
-void
-newtFormSetBackground(co,color)
-	Newt::Component co;
-	int color;
-
-void
-newtFormSetCurrent(co,subco)
-	Newt::Component co;
-	Newt::Component subco;
-
-void
-newtFormAddComponent(form,co)
-	Newt::Component form;
-	Newt::Component co;
-
-void
-newtFormAddGrid(form,grid,recurse)
-	Newt::Component form;
-	Newt::Grid grid;
-        int recurse;
-  CODE:
-  newtGridAddComponentsToForm(grid,form,recurse);
-
-void
-newtFormSetHeight(co,height)
-	Newt::Component co;
-	int height;
-
-void
-newtFormSetWidth(co,width)
-	Newt::Component co;
-	int width;
-
-Newt::Component
-newtRunForm(form)
-	Newt::Component form;
-
-void
-newtDrawForm(form)
-	Newt::Component form;
-
-Newt::Component
-newtEntry(left,top,initialValue,width,flag)
-	int left;
-	int top;
-	const char * initialValue;
-	int width;
-        int flag;
-	CODE:
-	{
-		char *result;
-		RETVAL = newtEntry(left,top,initialValue,width,&result,flag);
-	}
-	OUTPUT:
-	RETVAL
-
-void
-newtEntrySet(co,value,cursorAtEnd)
-	Newt::Component co;
-	const char * value;
-	int cursorAtEnd;
-
-char *
-newtEntryGetValue(co)
-	Newt::Component co;
-
-void
-newtFormDestroy(form)
-	Newt::Component form;
-
-MODULE = Newt		PACKAGE = Newt::Grid 	PREFIX = newt
-
-Newt::Grid
-newtCreateGrid(cols,rows)
-	int cols;
-	int rows;
-
-Newt::Grid
-HCloseStacked(first, ...)
-	Newt::Component first;
-     CODE:
-	{
-	  int i;
-	  newtComponent *p = alloca(sizeof(newtComponent) * (2 * items + 1));
-	  for (i = 0; i < items; i++) {
-	    p[2 * i] = 1;
-	    p[2 * i + 1] = (newtComponent)SvIV((SV*)SvRV( ST(i) ));
-	  }
-	  p[2 * items] = NULL;
-          RETVAL = ((newtGrid (*)()) newtGridHCloseStacked)();
-	}
-OUTPUT:
-RETVAL
-
-
-Newt::Grid
-newtGridBasicWindow(text,middle,buttons)
-	Newt::Component text;
-	Newt::Grid middle;
-	Newt::Grid buttons;
-
-
-Newt::Grid
-newtGridSimpleWindow(text,middle,buttons)
-	Newt::Component text;
-	Newt::Component middle;
-	Newt::Grid buttons;
-
-void
-newtGridSetField(grid,col,row,type,val,padLeft,padTop,padRight,padBottom,anchor,flags)
-	Newt::Grid grid;
-	int col;
-	int row;
-	enum newtGridElement type;
-	void * val;
-	int padLeft;
-	int padTop;
-	int padRight;
-	int padBottom;
-	int anchor;
-	int flags;
-
-
-void
-newtGridFree(grid,recurse)
-	Newt::Grid grid;
-	int recurse;
-
-void
-newtGridPlace(grid,left,top)
-	Newt::Grid grid;
-        int left;
-        int top;
-
-void
-newtGridGetSize(grid)
-	Newt::Grid grid;
- PPCODE:
-{
-  int width;
-  int height;
-  newtGridGetSize(grid, &width, &height);
-  PUSHs(sv_2mortal(newSViv(width)));
-  PUSHs(sv_2mortal(newSViv(height)));
-}
-
-void
-newtGridWrappedWindow(grid,title)
-	Newt::Grid grid;
-	char * title;
-	
-Newt::Grid
-newtButtonBar(button1, ...)
-	char * button1;
- PPCODE:
-	{
-	  static newtComponent p[11];
-	  int i;
-	  EXTEND(SP, items + 1);
-#define a(i) (char *)SvPV(ST(i),PL_na)
-          PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Grid", 
-	     newtButtonBar(items >  0 ? a( 0) : NULL, items >  0 ? &p[ 0] : NULL, 
-			   items >  1 ? a( 1) : NULL, items >  1 ? &p[ 1] : NULL, 
-			   items >  2 ? a( 2) : NULL, items >  2 ? &p[ 2] : NULL, 
-			   items >  3 ? a( 3) : NULL, items >  3 ? &p[ 3] : NULL, 
-			   items >  4 ? a( 4) : NULL, items >  4 ? &p[ 4] : NULL, 
-			   items >  5 ? a( 5) : NULL, items >  5 ? &p[ 5] : NULL, 
-			   items >  6 ? a( 6) : NULL, items >  6 ? &p[ 6] : NULL, 
-			   items >  7 ? a( 7) : NULL, items >  7 ? &p[ 7] : NULL, 
-			   items >  8 ? a( 8) : NULL, items >  8 ? &p[ 8] : NULL, 
-			   items >  9 ? a( 9) : NULL, items >  9 ? &p[ 9] : NULL, 
-			   items > 10 ? a(10) : NULL, items > 10 ? &p[10] : NULL,  
-			   NULL)));
-#undef a
-        for (i = 0; i < items; i++) PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Component", p[i]));
-	}
diff --git a/perl-install/Newt/typemap b/perl-install/Newt/typemap
deleted file mode 100644
index 5aaa2f668..000000000
--- a/perl-install/Newt/typemap
+++ /dev/null
@@ -1,25 +0,0 @@
-TYPEMAP
-
-const char *		T_PV
-const void *		T_PV
-int *			T_PV
-void **			T_PACKED
-
-enum newtFlagsSense	T_IV
-enum newtGridElement	T_IV
-SV **			T_SV
-
-Newt::Component		NewtComponent
-Newt::Grid		NewtGrid
-
-INPUT
-NewtComponent
-	$var = ($type) SvIV((SV*)SvRV($arg))
-NewtGrid
-	$var = ($type) SvIV((SV*)SvRV($arg))
-
-OUTPUT
-NewtComponent
-	sv_setref_pv($arg, "Newt::Component", (void*) $var);
-NewtGrid
-	sv_setref_pv($arg, "Newt::Grid", (void*) $var);
diff --git a/perl-install/any.pm b/perl-install/any.pm
deleted file mode 100644
index 2e97c9bc5..000000000
--- a/perl-install/any.pm
+++ /dev/null
@@ -1,1188 +0,0 @@
-package any; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use partition_table qw(:types);
-use fsedit;
-use fs;
-use lang;
-use run_program;
-use modules;
-use log;
-use c;
-
-sub drakx_version { 
-    sprintf "DrakX v%s built %s", $::testing ? ('TEST', scalar gmtime()) : (split('/', cat_("$ENV{SHARE_PATH}/VERSION")))[2,3];
-}
-
-sub facesdir {
-    my ($prefix) = @_;
-    "$prefix/usr/share/mdk/faces/";
-}
-sub face2png {
-    my ($face, $prefix) = @_;
-    facesdir($prefix) . $face . ".png";
-}
-sub facesnames {
-    my ($prefix) = @_;
-    my $dir = facesdir($prefix);
-    my @l = grep { /^[A-Z]/ } all($dir);
-    map { if_(/(.*)\.png/, $1) } (@l ? @l : all($dir));
-}
-
-sub addKdmIcon {
-    my ($prefix, $user, $icon) = @_;
-    my $dest = "$prefix/usr/share/faces/$user.png";
-    eval { cp_af(facesdir($prefix) . $icon . ".png", $dest) } if $icon;
-}
-
-sub allocUsers {
-    my ($prefix, $users) = @_;
-    my @m = my @l = facesnames($prefix);
-    foreach (grep { !$_->{icon} || $_->{icon} eq "automagic" } @$users) {
-	$_->{auto_icon} = splice(@m, rand(@m), 1); #- known biased (see cookbook for better)
-	log::l("auto_icon is $_->{auto_icon}");
-	@m = @l unless @m;
-    }
-}
-
-sub addUsers {
-    my ($prefix, $users) = @_;
-    my $msec = "$prefix/etc/security/msec";
-
-    allocUsers($prefix, $users);
-    foreach my $u (@$users) {
-	run_program::rooted($prefix, "usermod", "-G", join(",", @{$u->{groups}}), $u->{name}) if !is_empty_array_ref($u->{groups});
-	addKdmIcon($prefix, $u->{name}, delete $u->{auto_icon} || $u->{icon});
-    }
-}
-
-sub crypt {
-    my ($password, $md5) = @_;
-    crypt($password, $md5 ? '$1$' . salt(8) : salt(2));
-}
-sub enableShadow {
-    my ($prefix) = @_;
-    run_program::rooted($prefix, "pwconv")  or log::l("pwconv failed");
-    run_program::rooted($prefix, "grpconv") or log::l("grpconv failed");
-}
-sub enableMD5Shadow { #- NO MORE USED
-    my ($prefix, $shadow, $md5) = @_;
-    substInFile {
-	if (/^password.*pam_pwdb.so/) {
-	    s/\s*shadow//; s/\s*md5//;
-	    s/$/ shadow/ if $shadow;
-	    s/$/ md5/ if $md5;
-	}
-    } grep { -r $_ } map { "$prefix/etc/pam.d/$_" } qw(login rlogin passwd);
-}
-
-sub grub_installed {
-    my ($in) = @_;
-    my $f = "/usr/sbin/grub";
-    $in->do_pkgs->install('grub') if !-e $f;
-    -e $f;
-}
-
-sub setupBootloader {
-    my ($in, $b, $all_hds, $fstab, $security, $prefix, $more) = @_;
-    my $hds = $all_hds->{hds};
-
-    $more++ if $b->{bootUnsafe};
-    my $automatic = !$::expert && $more < 1;
-    my $semi_auto = !$::expert && arch() !~ /ia64/;
-    my $ask_per_entries = $::expert || $more > 1;
-    my $prev_boot = $b->{boot};
-    my $mixed_kind_of_disks = 
-      (grep { $_->{device} =~ /^sd/ } @$hds) && (grep { $_->{device} =~ /^hd/ } @$hds) ||
-      (grep { $_->{device} =~ /^hd[fghi]/ } @$hds) && (grep { $_->{device} =~ /^hd[abcd]/ } @$hds);
-
-    if ($mixed_kind_of_disks) {
-	$automatic = $semi_auto = 0;
-	#- full expert questions when there is 2 kind of disks
-	#- it would need a semi_auto asking on which drive the bios boots...
-    }
-    $automatic = 0 if arch() =~ /ppc/; #- no auto for PPC yet
-	
-    if ($automatic) {
-	#- automatic
-    } elsif ($semi_auto) {
-	my @l = (__("First sector of drive (MBR)"), __("First sector of boot partition"));
-
-	$in->set_help('setupBootloaderBeginner') unless $::isStandalone;
-	if (arch() =~ /sparc/) {
-	    $b->{use_partition} = $in->ask_from_list_(_("SILO Installation"),
-						      _("Where do you want to install the bootloader?"),
-						      \@l, $l[$b->{use_partition}]) or return 0;
-	} elsif (arch() =~ /ppc/) {
-		if (defined $partition_table_mac::bootstrap_part) {
-			$b->{boot} = $partition_table_mac::bootstrap_part;
-			log::l("set bootstrap to $b->{boot}"); 
-		} else {
-			die "no bootstrap partition - yaboot.conf creation failed";
-		}
-	} else {
-	    my $boot = $hds->[0]{device};
-	    my $onmbr = "/dev/$boot" eq $b->{boot};
-	    $b->{boot} = "/dev/" . ($in->ask_from_list_(_("LILO/grub Installation"),
-							_("Where do you want to install the bootloader?"),
-							\@l, $l[!$onmbr]) eq $l[0] 
-				    ? $boot : fsedit::get_root($fstab, 'boot')->{device});
-	}
-    } else {
-	$in->set_help(arch() =~ /sparc/ ? "setupSILOGeneral" :  arch() =~ /ppc/ ? 'setupYabootGeneral' :"setupBootloader") unless $::isStandalone; #- TO MERGE ?
-
-	my @silo_install_lang = (_("First sector of drive (MBR)"), _("First sector of boot partition"));
-	my $silo_install_lang = $silo_install_lang[$b->{use_partition}];
-
-	my %bootloaders = (if_(exists $b->{methods}{silo},
-			       __("SILO")                     => sub { $b->{methods}{silo} = 1 }),
-			   if_(exists $b->{methods}{lilo},
-			       __("LILO with text menu")      => sub { $b->{methods}{lilo} = "lilo-menu" },
-			       __("LILO with graphical menu") => sub { $b->{methods}{lilo} = "lilo-graphic" }),
-			   if_(exists $b->{methods}{grub},
-			       #- put lilo if grub is chosen, so that /etc/lilo.conf is generated
-			       __("Grub")                     => sub { $b->{methods}{grub} = 1;
-								       exists $b->{methods}{lilo}
-									 and $b->{methods}{lilo} = "lilo-menu" }),
-			   if_(exists $b->{methods}{loadlin},
-			       __("Boot from DOS/Windows (loadlin)") => sub { $b->{methods}{loadlin} = 1 }),
-			   if_(exists $b->{methods}{yaboot},
-			       __("Yaboot") => sub { $b->{methods}{yaboot} = 1 }),
-			  );
-	my $bootloader = arch() =~ /sparc/ ? __("SILO") : arch() =~ /ppc/ ? __("Yaboot") : __("LILO with graphical menu");
-	my $profiles = bootloader::has_profiles($b);
-	my $memsize = bootloader::get_append($b, 'mem');
-	my $prev_clean_tmp = my $clean_tmp = grep { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special} ||= []};
-
-	$b->{vga} ||= 'normal';
-	if (arch() !~ /ppc/) {
-	$in->ask_from('', _("Bootloader main options"), [
-{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },
-    arch() =~ /sparc/ ? (
-{ label => _("Bootloader installation"), val => \$silo_install_lang, list => \@silo_install_lang },
-) : if_(arch() !~ /ia64/,
-{ label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (@$hds, grep { !isFat($_) } @$fstab)), detect_devices::floppies_dev() ], not_edit => !$::expert },
-{ label => _("LBA (doesn't work on old BIOSes)"), val => \$b->{lba32}, type => "bool", text => "lba", advanced => 1 },
-{ label => _("Compact"), val => \$b->{compact}, type => "bool", text => _("compact"), advanced => 1 },
-{ label => _("Video mode"), val => \$b->{vga}, list => [ keys %bootloader::vga_modes ], not_edit => !$::expert, format => sub { $bootloader::vga_modes{$_[0]} }, advanced => 1 },
-),
-{ label => _("Delay before booting default image"), val => \$b->{timeout} },
-    if_($security >= 4,
-{ label => _("Password"), val => \$b->{password}, hidden => 1 },
-{ label => _("Password (again)"), val => \$b->{password2}, hidden => 1 },
-{ label => _("Restrict command line options"), val => \$b->{restricted}, type => "bool", text => _("restrict") },
-    ),
-{ label => _("Clean /tmp at each boot"), val => \$clean_tmp, type => 'bool', advanced => 1 },
-{ label => _("Precise RAM size if needed (found %d MB)", availableRamMB()), val => \$memsize, advanced => 1 },
-    if_(detect_devices::isLaptop,
-{ label => _("Enable multi profiles"), val => \$profiles, type => 'bool', advanced => 1 },
-    ),
-],
-				 complete => sub {
-				     !$memsize || $memsize =~ /K$/ || $memsize =~ s/^(\d+)M?$/$1M/i or $in->ask_warn('', _("Give the ram size in MB")), return 1;
-#-				     $security > 4 && length($b->{password}) < 6 and $in->ask_warn('', _("At this level of security, a password (and a good one) in lilo is requested")), return 1;
-				     $b->{restricted} && !$b->{password} and $in->ask_warn('', _("Option ``Restrict command line options'' is of no use without a password")), return 1;
-				     $b->{password} eq $b->{password2} or !$b->{restricted} or $in->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return 1;
-				     0;
-				 }
-				) or return 0;
-	} else {
-	$b->{boot} = $partition_table_mac::bootstrap_part;	
-	$in->ask_from('', _("Bootloader main options"), [
-	{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },	
-	{ label => _("Init Message"), val => \$b->{'init-message'} },
-	{ label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (grep { isAppleBootstrap($_) } @$fstab))], not_edit => !$::expert },
-	{ label => _("Open Firmware Delay"), val => \$b->{delay} },
-	{ label => _("Kernel Boot Timeout"), val => \$b->{timeout} },
-	{ label => _("Enable CD Boot?"), val => \$b->{enablecdboot}, type => "bool" },
-	{ label => _("Enable OF Boot?"), val => \$b->{enableofboot}, type => "bool" },
-	{ label => _("Default OS?"), val=> \$b->{defaultos}, list => [ 'linux', 'macos', 'macosx', 'darwin' ] },
-	]) or return 0;				
-	}
-	
-	$b->{methods}{$_} = 0 foreach keys %{$b->{methods}};
-	$bootloaders{$bootloader} and $bootloaders{$bootloader}->();
-
-	grub_installed($in) or return 1 if $b->{methods}{grub};
-
-	#- at least one method
-	grep_each { $::b } %{$b->{methods}} or return 0;
-
-	$b->{use_partition} = $silo_install_lang eq _("First sector of drive (MBR)") ? 0 : 1;
-
-	bootloader::set_profiles($b, $profiles);
-	bootloader::add_append($b, "mem", $memsize);
-
-	if ($prev_clean_tmp != $clean_tmp) {
-	    if ($clean_tmp) {
-		push @{$all_hds->{special}}, { device => 'none', mntpoint => '/tmp', type => 'tmpfs' };
-	    } else {
-		@{$all_hds->{special}} = grep { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special}};
-	    }
-	}
-    }
-
-    #- remove bios mapping if the user changed the boot device
-    delete $b->{bios} if $b->{boot} ne $prev_boot;
-
-    if ($mixed_kind_of_disks && 
-#	$b->{boot} !~ /$hds->[0]{device}/ && #- not the first disk
-	$b->{boot} =~ /\d$/ && #- on a partition
-	is_empty_hash_ref($b->{bios}) && #- some bios mapping already there
-	arch() !~ /ppc/) {
-	my $hd = $in->ask_from_listf('', _("You decided to install the bootloader on a partition.
-This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
-
-On which drive are you booting?"), \&partition_table::description, $hds) or goto &setupBootloader;
-	$b->{first_hd_device} = "/dev/$hd->{device}";
-    }
-
-    $ask_per_entries or return 1;
-
-    while (1) {
-	$in->set_help(arch() =~ /sparc/ ? 'setupSILOAddEntry' : arch() =~ /ppc/ ? 'setupYabootAddEntry' : 'setupBootloaderAddEntry') unless $::isStandalone;
-	my ($c, $e);
-	$in->ask_from_(
-		{
-		 messages => 
-_("Here are the entries on your boot menu so far.
-You can add some more or change the existing ones."),
-		 ok => '',
-},
-		[ { val => \$e, type => 'combo', format => sub {
-		    my ($e) = @_;
-		    ref $e ? 
-		      "$e->{label} ($e->{kernel_or_dev})" . ($b->{default} eq $e->{label} && "  *") : 
-		      translate($e);
-		}, list => [ @{$b->{entries}} ], allow_empty_list => 1 },
-		  (map { my $s = $_; { val => translate($_), clicked_may_quit => sub { $c = $s; 1 } } } (if_(@{$b->{entries}} > 0, __("Modify")), __("Add"), __("Done"))),
-		]
-	);
-	!$c || $c eq "Done" and last;
-
-	if ($c eq "Add") {
-	    my @labels = map { $_->{label} } @{$b->{entries}};
-	    my $prefix;
-	    if ($in->ask_from_list_('', _("Which type of entry do you want to add?"),
-				    [ __("Linux"), arch() =~ /sparc/ ? __("Other OS (SunOS...)") : arch() =~ /ppc/ ? 
-				   __("Other OS (MacOS...)") : __("Other OS (windows...)") ]
-				   ) eq "Linux") {
-		$e = { type => 'image',
-		       root => '/dev/' . fsedit::get_root($fstab)->{device}, #- assume a good default.
-		     };
-		$prefix = "linux";
-	    } else {
-		$e = { type => 'other' };
-		$prefix = arch() =~ /sparc/ ? "sunos" : arch() =~ /ppc/ ? "macos" : "windows";;
-	    }
-	    $e->{label} = $prefix;
-	    for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
-	}
-	my %old_e = %$e;
-	my $default = my $old_default = $e->{label} eq $b->{default};
-
-	my @l;
-	if ($e->{type} eq "image") { 
-	    @l = (
-{ label => _("Image"), val => \$e->{kernel_or_dev}, list => [ map { s/$prefix//; $_ } glob_("$prefix/boot/vmlinuz*") ], not_edit => 0 },
-{ label => _("Root"), val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-{ label => _("Append"), val => \$e->{append} },
-  if_(arch !~ /ppc|ia64/,
-{ label => _("Video mode"), val => \$e->{vga}, list => [ keys %bootloader::vga_modes ], format => sub { $bootloader::vga_modes{$_[0]} }, not_edit => !$::expert },
-),
-{ label => _("Initrd"), val => \$e->{initrd}, list => [ map { s/$prefix//; $_ } glob_("$prefix/boot/initrd*") ], not_edit => 0 },
-{ label => _("Read-write"), val => \$e->{'read-write'}, type => 'bool' }
-	    );
-	    @l = @l[0..2] unless $::expert;
-	} else {
-	    @l = ( 
-{ label => _("Root"), val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-if_(arch() !~ /sparc|ppc|ia64/,
-{ label => _("Table"), val => \$e->{table}, list => [ '', map { "/dev/$_->{device}" } @$hds ], not_edit => !$::expert },
-{ label => _("Unsafe"), val => \$e->{unsafe}, type => 'bool' }
-),
-	    );
-	    @l = $l[0] unless $::expert;
-	}
-if (arch() !~ /ppc/) {
-	@l = (
-{ label => _("Label"), val => \$e->{label} },
-@l,
-{ label => _("Default"), val => \$default, type => 'bool' },
-	);
-} else {
-	@l = ({ label => _("Label"), val => \$e->{label}, list=> ['macos', 'macosx', 'darwin'] },
-	@l );
-	if ($e->{type} eq "image") {
-		@l = ({ label => _("Label"), val => \$e->{label} },
-		$::expert ? @l[1..4] : (@l[1..2], { label => _("Append"), val => \$e->{append} }) ,
-		if_($::expert, { label => _("Initrd-size"), val => \$e->{initrdsize}, list => [ '', '4096', '8192', '16384', '24576' ] }),
-		if_($::expert, $l[5]),
-		{ label => _("NoVideo"), val => \$e->{novideo}, type => 'bool' },
-		{ label => _("Default"), val => \$default, type => 'bool' }
-		);
-	}
-}
-
-	if ($in->ask_from_(
-	    { 
-	     if_($c ne "Add", cancel => _("Remove entry")),
-	     callbacks => {
-	       complete => sub {
-		   $e->{label} or $in->ask_warn('', _("Empty label not allowed")), return 1;
-		   $e->{kernel_or_dev} or $in->ask_warn('', $e->{type} eq 'image' ? _("You must specify a kernel image") : _("You must specify a root partition")), return 1;
-		   member(lc $e->{label}, map { lc $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $in->ask_warn('', _("This label is already used")), return 1;
-		   0;
-	       } } }, \@l)) {
-	    $b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
-	    require bootloader;
-	    bootloader::configure_entry($prefix, $e); #- hack to make sure initrd file are built.
-
-	    push @{$b->{entries}}, $e if $c eq "Add";
-	} else {
-	    delete $b->{default} if $b->{default} eq $e->{label};
-	    @{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
-	}
-    }
-    1;
-}
-
-my @etc_pass_fields = qw(name pw uid gid realname home shell);
-sub unpack_passwd {
-    my ($l) = @_;
-    my %l; @l{@etc_pass_fields} = split ':', chomp_($l);
-    \%l;
-}
-sub pack_passwd {
-    my ($l) = @_;
-    join(':', @$l{@etc_pass_fields}) . "\n";
-}
-
-sub get_autologin {
-    my ($prefix, $o) = @_;
-    my %l = getVarsFromSh("$prefix/etc/sysconfig/autologin");
-    $o->{autologin} ||= $l{USER};
-    %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-    $o->{desktop} ||= $l{DESKTOP};
-}
-
-sub set_autologin {
-  my ($prefix, $user, $desktop) = @_;
-
-  if ($user) {
-      my %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-      $l{DESKTOP} = $desktop;
-      setVarsInSh("$prefix/etc/sysconfig/desktop", \%l);
-      log::l("cat $prefix/etc/sysconfig/desktop ($desktop):\n", cat_("$prefix/etc/sysconfig/desktop"));
-  }
-  setVarsInSh("$prefix/etc/sysconfig/autologin",
-	      { USER => $user, AUTOLOGIN => bool2yesno($user), EXEC => "/usr/X11R6/bin/startx" });
-  log::l("cat $prefix/etc/sysconfig/autologin ($user):\n", cat_("$prefix/etc/sysconfig/autologin"));
-}
-
-sub rotate_log {
-    my ($f) = @_;
-    if (-e $f) {
-	my $i = 1;
-	for (; -e "$f$i" || -e "$f$i.gz"; $i++) {}
-	rename $f, "$f$i";
-    }
-}
-sub rotate_logs {
-    my ($prefix) = @_;
-    rotate_log("$prefix/root/drakx/$_") foreach qw(ddebug.log install.log);
-}
-
-sub writeandclean_ldsoconf {
-    my ($prefix) = @_;
-    my $file = "$prefix/etc/ld.so.conf";
-    output $file,
-      grep { !m|^(/usr)?/lib$| } #- no need to have /lib and /usr/lib in ld.so.conf
-	uniq cat_($file), "/usr/X11R6/lib\n";
-}
-
-sub shells {
-    my ($prefix) = @_;
-    grep { -x "$prefix$_" } chomp_(cat_("$prefix/etc/shells"));
-}
-
-sub inspect {
-    my ($part, $prefix, $rw) = @_;
-
-    isMountableRW($part) or return;
-
-    my $dir = $::isInstall ? "/tmp/inspect_tmp_dir" : "/root/.inspect_tmp_dir";
-
-    if ($part->{isMounted}) {
-	$dir = ($prefix || '') . $part->{mntpoint};
-    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
-	$dir = '';
-    } else {
-	mkdir $dir, 0700;
-	eval { fs::mount($part->{device}, $dir, type2fs($part), !$rw) };
-	$@ and return;
-    }
-    my $h = before_leaving {
-	if (!$part->{isMounted} && $dir) {
-	    fs::umount($dir);
-	    unlink($dir)
-	}
-    };
-    $h->{dir} = $dir;
-    $h;
-}
-
-#-----modem conf
-sub pppConfig {
-    my ($in, $modem, $prefix) = @_;
-    $modem or return;
-
-    if ($modem->{device} ne "/dev/modem") {
-	devfssymlinkf($modem->{device}, 'modem', $prefix) or log::l("creation of $prefix/dev/modem failed")
-    }
-    $in->do_pkgs->install('ppp') if !$::testing;
-
-    my %toreplace;
-    $toreplace{$_} = $modem->{$_} foreach qw(connection phone login passwd auth domain dns1 dns2);
-    $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, }}{$modem->{auth}};
-    $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, 'CHAP' => 3 }}{$modem->{auth}};
-    $toreplace{phone} =~ s/\D//g;
-    $toreplace{dnsserver} = join ',', map { $modem->{$_} } "dns1", "dns2";
-    $toreplace{dnsserver} .= $toreplace{dnsserver} && ',';
-
-    #- using peerdns or dns1,dns2 avoid writing a /etc/resolv.conf file.
-    $toreplace{peerdns} = "yes";
-
-    $toreplace{connection} ||= 'DialupConnection';
-    $toreplace{domain} ||= 'localdomain';
-    $toreplace{intf} ||= 'ppp0';
-    $toreplace{papname} = ($modem->{auth} eq 'PAP' || $modem->{auth} eq 'CHAP') && $toreplace{login};
-
-    #- build ifcfg-ppp0.
-    my $ifcfg = "$prefix/etc/sysconfig/network-scripts/ifcfg-ppp0";
-    local *IFCFG; open IFCFG, ">$ifcfg" or die "Can't open $ifcfg";
-    print IFCFG <<END;
-DEVICE="$toreplace{intf}"
-ONBOOT="no"
-USERCTL="no"
-MODEMPORT="/dev/modem"
-LINESPEED="115200"
-PERSIST="yes"
-DEFABORT="yes"
-DEBUG="yes"
-INITSTRING="ATZ"
-DEFROUTE="yes"
-HARDFLOWCTL="yes"
-ESCAPECHARS="no"
-PPPOPTIONS=""
-PAPNAME="$toreplace{papname}"
-REMIP=""
-NETMASK=""
-IPADDR=""
-MRU=""
-MTU=""
-DISCONNECTTIMEOUT="5"
-RETRYTIMEOUT="60"
-BOOTPROTO="none"
-PEERDNS="$toreplace{peerdns}"
-END
-    foreach (1..2) {
-	if ($toreplace{"dns$_"}) {
-	    print IFCFG <<END;
-DNS$_=$toreplace{"dns$_"}
-END
-	}
-    }
-    close IFCFG;
-
-    #- build chat-ppp0.
-    my $chat = "$prefix/etc/sysconfig/network-scripts/chat-ppp0";
-    local *CHAT; open CHAT, ">$chat" or die "Can't open $chat";
-    print CHAT <<END;
-'ABORT' 'BUSY'
-'ABORT' 'ERROR'
-'ABORT' 'NO CARRIER'
-'ABORT' 'NO DIALTONE'
-'ABORT' 'Invalid Login'
-'ABORT' 'Login incorrect'
-'' 'ATZ'
-END
-    if ($modem->{special_command}) {
-	print CHAT <<END;
-'OK' '$modem->{special_command}'
-END
-    }
-    print CHAT <<END;
-'OK' 'ATDT$toreplace{phone}'
-'CONNECT' ''
-END
-    if ($modem->{auth} eq 'Terminal-based' || $modem->{auth} eq 'Script-based') {
-	print CHAT <<END;
-'ogin:--ogin:' '$toreplace{login}'
-'ord:' '$toreplace{passwd}'
-END
-    }
-    print CHAT <<END;
-'TIMEOUT' '5'
-'~--' ''
-END
-    close CHAT;
-    chmod 0600, $chat;
-
-    if ($modem->{auth} eq 'PAP' || $modem->{auth} eq 'CHAP') {
-	#- need to create a secrets file for the connection.
-	my $secrets = "$prefix/etc/ppp/" . lc($modem->{auth}) . "-secrets";
-	my @l = cat_($secrets);
-	my $replaced = 0;
-	do { $replaced ||= 1
-	       if s/^\s*"?$toreplace{login}"?\s+ppp0\s+(\S+)/"$toreplace{login}"  ppp0  "$toreplace{passwd}"/; } foreach @l;
-	if ($replaced) {
-	    local *F;
-	    open F, ">$secrets" or die "Can't open $secrets: $!";
-	    print F @l;
-        } else {
-	    local *F;
-	    open F, ">>$secrets" or die "Can't open $secrets: $!";
-	    print F "$toreplace{login}  ppp0  \"$toreplace{passwd}\"\n";
-	}
-	#- restore access right to secrets file, just in case.
-	chmod 0600, $secrets;
-    }
-
-    #- install kppprc file according to used configuration.
-    mkdir_p("$prefix/usr/share/config");
-
-    {
-	local *KPPPRC;
-	open KPPPRC, ">$prefix/usr/share/config/kppprc" or die "Can't open $prefix/usr/share/config/kppprc: $!";
-	#chmod 0600, "$prefix/usr/share/config/kppprc";
-	print KPPPRC c::to_utf8(<<END);
-# KDE Config File
-[Account0]
-ExDNSDisabled=0
-AutoName=0
-ScriptArguments=
-AccountingEnabled=0
-DialString=ATDT
-Phonenumber=$toreplace{phone}
-IPAddr=0.0.0.0
-Domain=$toreplace{domain}
-Name=$toreplace{connection}
-VolumeAccountingEnabled=0
-pppdArguments=
-Password=$toreplace{passwd}
-BeforeDisconnect=
-Command=
-ScriptCommands=
-Authentication=$toreplace{kpppauth}
-DNS=$toreplace{dnsserver}
-SubnetMask=0.0.0.0
-AccountingFile=
-DefaultRoute=1
-Username=$toreplace{login}
-Gateway=0.0.0.0
-StorePassword=1
-DisconnectCommand=
-[Modem]
-BusyWait=0
-Enter=CR
-FlowControl=CRTSCTS
-Volume=0
-Timeout=60
-UseCDLine=0
-UseLockFile=1
-Device=/dev/modem
-Speed=115200
-[Graph]
-InBytes=0,0,255
-Text=0,0,0
-Background=255,255,255
-Enabled=true
-OutBytes=255,0,0
-[General]
-QuitOnDisconnect=0
-ShowLogWindow=0
-DisconnectOnXServerExit=1
-DefaultAccount=$toreplace{connection}
-iconifyOnConnect=1
-Hint_QuickHelp=0
-AutomaticRedial=0
-PPPDebug=0
-NumberOfAccounts=1
-ShowClock=1
-DockIntoPanel=0
-pppdTimeout=30
-END
-    }
-    miscellaneousNetwork($prefix);
-}
-
-sub miscellaneousNetwork {
-    my ($prefix) = @_;
-    setVarsInSh ("$prefix/etc/profile.d/proxy.sh",  $::o->{miscellaneous}, qw(http_proxy ftp_proxy));
-    setVarsInCsh("$prefix/etc/profile.d/proxy.csh", $::o->{miscellaneous}, qw(http_proxy ftp_proxy));
-}
-
-sub load_category_no_message {
-    my ($category, $at_least_one) = @_;
-    my @l;
-    @l = modules::load_category($category, undef);
-    @l = modules::load_category($category, undef, 'force') if !@l && $at_least_one;
-    @l;
-}
-
-sub load_category {
-    my ($in, $category, $auto, $at_least_one) = @_;
-
-    my @l;
-    if (!$::noauto) {
-	my $w;
-	my $wait_message = sub { $w = wait_load_module($in, $category, @_) };
-	@l = modules::load_category($category, $wait_message);
-	@l = modules::load_category($category, $wait_message, 'force') if !@l && $at_least_one;
-    }
-    if (my @err = grep { $_ } map { $_->{error} } @l) {
-	$in->ask_warn('', join("\n", @err));
-    }
-    return @l if $auto && (@l || !$at_least_one);
-
-    @l = map { $_->{description} } @l;
-
-    if ($at_least_one && !@l) {
-	@l = load_category__prompt($in, $category) or return;
-    }
-
-    load_category__prompt_for_more($in, $category, @l);
-}
-
-sub load_category__prompt_for_more {
-    my ($in, $category, @l) = @_;
-
-    (my $msg_type = $category) =~ s/\|.*//;
-
-    while (1) {
-	my $msg = @l ?
-	  [ _("Found %s %s interfaces", join(", ", @l), $msg_type),
-	    _("Do you have another one?") ] :
-	  _("Do you have any %s interfaces?", $msg_type);
-
-	my $opt = [ __("Yes"), __("No") ];
-	push @$opt, __("See hardware info") if $::expert;
-	my $r = $in->ask_from_list_('', $msg, $opt, "No") or die 'already displayed';
-	if ($r eq "No") { return @l }
-	if ($r eq "Yes") {
-	    push @l, load_category__prompt($in, $category) || next;
-	} else {
-	    $in->ask_warn('', [ detect_devices::stringlist() ]);
-	}
-    }
-}
-
-sub wait_load_module {
-    my ($in, $category, $text, $module) = @_;
-#-PO: the first %s is the card type (scsi, network, sound,...)
-#-PO: the second is the vendor+model name
-    $in->wait_message('',
-		     [ _("Installing driver for %s card %s", $category, $text),
-		       if_($::expert, _("(module %s)", $module))
-		     ]);
-}
-
-sub load_module__ask_options {
-    my ($in, $module_descr, $parameters) = @_;
-
-    if (@$parameters) {
-	$in->ask_from('', 
-		      _("You may now provide its options to module %s.\nNote that any address should be entered with the prefix 0x like '0x123'", $module_descr), 
-		      [ map {; { label => $_->[0], help => $_->[1], val => \$_->[2] } } @$parameters ],
-		     ) or return;
-	map { if_($_->[2], "$_->[0]=$_->[2]") } @$parameters;
-    } else {
-	split ' ', $in->ask_from_entry('',
-_("You may now provide options to module %s.
-Options are in format ``name=value name2=value2 ...''.
-For instance, ``io=0x300 irq=7''", $module_descr), _("Module options:"),
-				);
-    }
-}
-
-sub load_category__prompt {
-    my ($in, $category) = @_;
-
-    (my $msg_type = $category) =~ s/\|.*//;
-    my %available_modules = map_each { $::a => $::b ? "$::a ($::b)" : $::a } modules::category2modules_and_description($category);
-    my $module = $in->ask_from_listf('',
-#-PO: the %s is the driver type (scsi, network, sound,...)
-			       _("Which %s driver should I try?", $msg_type),
-			       sub { $available_modules{$_[0]} },
-			       [ keys %available_modules ]) or return;
-    my $module_descr = $available_modules{$module};
-
-    my @options;
-    require modparm;
-    my @parameters = modparm::parameters($module);
-    if (@parameters && $in->ask_from_list_('',
-_("In some cases, the %s driver needs to have extra information to work
-properly, although it normally works fine without. Would you like to specify
-extra options for it or allow the driver to probe your machine for the
-information it needs? Occasionally, probing will hang a computer, but it should
-not cause any damage.", $module_descr), [ __("Autoprobe"), __("Specify options") ], 'Autoprobe') ne 'Autoprobe') {
-	@options = load_module__ask_options($in, $module_descr, \@parameters);
-    }
-    while (1) {
-	eval {
-	    my $w = wait_load_module($in, $category, $module_descr, $module);
-	    log::l("user asked for loading module $module (type $category, desc $module_descr)");
-	    modules::load([ $module, @options ]);
-	};
-	return $module_descr if !$@;
-
-	$in->ask_yesorno('',
-_("Loading module %s failed.
-Do you want to try again with other parameters?", $module_descr), 1) or return;
-
-	@options = load_module__ask_options($in, $module_descr, \@parameters);
-    }
-}
-
-sub ask_users {
-    my ($prefix, $in, $users, $security) = @_;
-
-    my $u if 0; $u ||= {};
-
-    my @shells = map { chomp; $_ } cat_("$prefix/etc/shells");
-    my @icons = facesnames($prefix);
-
-    my %high_security_groups = (
-        xgrp => _("access to X programs"),
-	rpm => _("access to rpm tools"),
-	wheel => _("allow \"su\""),
-	adm => _("access to administrative files"),
-    );
-    while (1) {
-	$u->{password2} ||= $u->{password} ||= '';
-	$u->{shell} ||= '/bin/bash';
-	my $names = @$users ? _("(already added %s)", join(", ", map { $_->{realname} || $_->{name} } @$users)) : '';
-
-	my %groups;
-	my $verif = sub {
-	    $u->{password} eq $u->{password2} or $in->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,2);
-	    $security > 3 && length($u->{password}) < 6 and $in->ask_warn('', _("This password is too simple")), return (1,2);
-	    $u->{name} or $in->ask_warn('', _("Please give a user name")), return (1,0);
-	    $u->{name} =~ /^[a-z0-9_-]+$/ or $in->ask_warn('', _("The user name must contain only lower cased letters, numbers, `-' and `_'")), return (1,0);
-	    length($u->{name}) <= 32 or $in->ask_warn('', _("The user name is too long")), return (1,0);
-	    member($u->{name}, map { $_->{name} } @$users) and $in->ask_warn('', _("This user name is already added")), return (1,0);
-	    return 0;
-	};
-	my $ret = $in->ask_from_(
-	    { title => _("Add user"),
-	      messages => _("Enter a user\n%s", $names),
-	      ok => _("Accept user"),
-	      cancel => $security < 4 || @$users ? _("Done") : '',
-	      callbacks => {
-	          focus_out => sub {
-		      if ($_[0] eq 0) {
-			  $u->{name} ||= lc first($u->{realname} =~ /([\w-]+)/);
-		      }
-		  },
-	          complete => $verif,
-                  canceled => sub { $u->{name} ? &$verif : 0; },
-	    } }, [ 
-	    { label => _("Real name"), val => \$u->{realname} },
-	    { label => _("User name"), val => \$u->{name} },
-            { label => _("Password"),val => \$u->{password}, hidden => 1 },
-            { label => _("Password (again)"), val => \$u->{password2}, hidden => 1 },
-            { label => _("Shell"), val => \$u->{shell}, list => [ shells($prefix) ], not_edit => !$::expert, advanced => 1 },
-	      if_($security <= 3 && @icons,
-	    { label => _("Icon"), val => \ ($u->{icon} ||= 'man'), list => \@icons, icon2f => sub { face2png($_[0], $prefix) }, format => \&translate },
-	      ),
-	      if_($security > 3,
-		  map {; 
-            { label => $_, val => \$groups{$_}, text => $high_security_groups{$_}, type => 'bool' }
-		  } keys %high_security_groups,
-	      ),
-           ],
-        );
-	$u->{groups} = [ grep { $groups{$_} } keys %groups ];
-
-	push @$users, $u if $u->{name};
-	$u = {};
-	$ret or return;
-    }
-}
-
-sub autologin {
-    my ($prefix, $o, $in) = @_;
-
-    my $cmd = $prefix ? "chroot $prefix" : "";
-    my @wm = (split (' ', `$cmd /usr/sbin/chksession -l 2>/dev/null`));
-    my @users = map { $_->{name} } @{$o->{users} || []};
-
-    if (@wm > 1 && @users && !$o->{authentication}{NIS} && $o->{security} <= 2) {
-	add2hash_($o, { autologin => $users[0] });
-
-	$in->ask_from_(
-		       { title => _("Autologin"),
-			 messages => _("I can set up your computer to automatically log on one user.
-Do you want to use this feature?"),
-			 ok => _("Yes"),
-			 cancel => _("No") },
-		       [ { label => _("Choose the default user:"), val => \$o->{autologin}, list => \@users },
-			 { label => _("Choose the window manager to run:"), val => \$o->{desktop}, list => \@wm } ]
-		      )
-	  or delete $o->{autologin};
-    } else {
-	delete $o->{autologin};
-    }
-}
-
-sub selectLanguage {
-    my ($in, $lang, $langs_) = @_;
-    my $langs = $langs_ || {};
-    my @langs = lang::list(exclude_non_necessary_utf8 => $::isInstall, 
-			   exclude_non_installed_langs => !$::isInstall,
-			  );
-    $in->ask_from_(
-	{ messages => _("Please choose a language to use."),
-	  title => 'language choice',
-	  advanced_messages => formatAlaTeX(_("Mandrake Linux can support multiple languages. Select
-the languages you would like to install. They will be available
-when your installation is complete and you restart your system.")),
-	  callbacks => {
-	      focus_out => sub { $langs->{$lang} = 1 },
-	  },
-	},
-	[ { val => \$lang, separator => '|', 
-	    format => \&lang::lang2text, list => \@langs },
-	    if_($langs_, (map {;
-	       { val => \$langs->{$_->[0]}, type => 'bool', disabled => sub { $langs->{all} },
-		 text => $_->[1], advanced => 1,
-	       } 
-	   } sort { $a->[1] cmp $b->[1] } map { [ $_, lang::lang2text($_) ] } lang::list()),
-	  { val => \$langs->{all}, type => 'bool', text => _("All"), advanced => 1 }),
-	]) or return;
-    $lang;
-}
-
-sub write_passwd_user {
-    my ($prefix, $u, $isMD5) = @_;
-
-    $u->{pw} = &crypt($u->{password}, $isMD5) if $u->{password};
-    $u->{shell} ||= '/bin/bash';
-
-    substInFile {
-	my $l = unpack_passwd($_);
-	if ($l->{name} eq $u->{name}) {
-	    add2hash_($u, $l);
-	    $_ = pack_passwd($u);
-	    $u = {};
-	}
-	if (eof && $u->{name}) {
-	    $_ .= pack_passwd($u);
-	}
-    } "$prefix/etc/passwd";
-}
-
-sub set_login_serial_console {
-    my ($prefix, $port, $speed) = @_;
-
-    my $line = "s$port:12345:respawn:/sbin/getty ttyS$port DT$speed ansi\n";
-    substInFile { s/^s$port:.*//; $_ = "$line" if eof } "$prefix/etc/inittab";
-}
-
-
-sub runlevel {
-    my ($prefix, $runlevel) = @_;
-    my $f = "$prefix/etc/inittab";
-    -r $f or log::l("missing inittab!!!"), return;
-    if ($runlevel) {
-	substInFile { s/^id:\d:initdefault:\s*$/id:$runlevel:initdefault:\n/ } $f;
-    } else {
-	cat_($f) =~ /^id:(\d):initdefault:\s*$/ && $1;
-    }
-}
-
-sub report_bug {
-    my ($prefix, @other) = @_;
-
-    sub header { "
-********************************************************************************
-* $_[0]
-********************************************************************************";
-    }
-
-    join '', map { chomp; "$_\n" }
-      header("lspci"), detect_devices::stringlist(),
-      header("pci_devices"), cat_("/proc/bus/pci/devices"),
-      header("fdisk"), arch() =~ /ppc/ ? `$ENV{LD_LOADER} pdisk -l` : `$ENV{LD_LOADER} fdisk -l`,
-      header("scsi"), cat_("/proc/scsi/scsi"),
-      header("lsmod"), cat_("/proc/modules"),
-      header("cmdline"), cat_("/proc/cmdline"),
-      header("pcmcia: stab"), cat_("$prefix/var/lib/pcmcia/stab") || cat_("$prefix/var/run/stab"),
-      header("usb"), cat_("/proc/bus/usb/devices"),
-      header("partitions"), cat_("/proc/partitions"),
-      header("cpuinfo"), cat_("/proc/cpuinfo"),
-      header("syslog"), cat_("/tmp/syslog") || cat_("$prefix/var/log/syslog"),
-      header("ddcxinfos"), ddcxinfos(),
-      header("stage1.log"), cat_("/tmp/stage1.log") || cat_("$prefix/root/drakx/stage1.log"),
-      header("ddebug.log"), cat_("/tmp/ddebug.log") || cat_("$prefix/root/drakx/ddebug.log"),
-      header("install.log"), cat_("$prefix/root/drakx/install.log"),
-      header("fstab"), cat_("$prefix/etc/fstab"),
-      header("modules.conf"), cat_("$prefix/etc/modules.conf"),
-      header("lilo.conf"), cat_("$prefix/etc/lilo.conf"),
-      header("menu.lst"), cat_("$prefix/boot/grub/menu.lst"),
-      header("/etc/modules"), cat_("$prefix/etc/modules"),
-      map_index { even($::i) ? header($_) : $_ } @other;
-}
-
-sub devfssymlinkf {
-    my ($if, $of, $prefix) = @_;
-    symlinkf($if, "$prefix/dev/$of");
-
-    output_p("$prefix/etc/devfs/conf.d/$of.conf", 
-"REGISTER	^$if\$	CFUNCTION GLOBAL symlink $if $of
-UNREGISTER	^$if\$	CFUNCTION GLOBAL unlink $of
-");
-}
-
-sub fileshare_config {
-    my ($in, $type) = @_; #- $type is 'nfs', 'smb' or ''
-
-    my $file = '/etc/security/fileshare.conf';
-    my %conf = getVarsFromSh($file);
-
-    my @l = (__("No sharing"), __("Allow all users"), __("Custom"));
-    my $restrict = exists $conf{RESTRICT} ? text2bool($conf{RESTRICT}) : 1;
-
-    if ($restrict) {
-	#- verify we can export in $type
-	my %type2file = (nfs => [ '/etc/init.d/nfs', 'nfs-utils' ], smb => [ '/etc/init.d/smb', 'samba' ]);
-	my @wanted = $type ? $type : keys %type2file;
-	my @have = grep { -e $type2file{$_}[0] } @wanted;
-	if (!@have) {
-	    if (@wanted == 1) {
-		$in->ask_okcancel('', _("The package %s needs to be installed. Do you want to install it?", $type2file{$wanted[0]}[1]), 1) or return;
-	    } else {
-		my %choices;
-		my $wanted = $in->ask_many_from_list('', _("You can export using NFS or Samba. Please select which you'd like to use."),
-						  { list => \@wanted }) or return;
-		@wanted = @$wanted or return;
-	    }
-	    $in->do_pkgs->install(map { $type2file{$_}[1] } @wanted);
-	    @have = grep { -e $type2file{$_}[0] } @wanted;
-	}
-	if (!@have) {
-	    $in->ask_warn('', _("Mandatory package %s is missing", $wanted[0]));
-	    return;
-	}
-    }
-
-    my $r = $in->ask_from_list_('fileshare',
-_("Would you like to allow users to share some of their directories?
-Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.
-
-\"Custom\" permit a per-user granularity.
-"),
-				\@l, $l[$restrict ? 0 : 1]) or return;
-    $restrict = $r ne $l[1];
-    $conf{RESTRICT} = bool2yesno($restrict);
-
-    setVarsInSh($file, \%conf);
-    if ($r eq $l[2]) {
-	# custom
-	if ($in->ask_from_no_check(
-	{
-	 -e '/usr/bin/userdrake' ? (ok => _("Launch userdrake"), cancel => _("Cancel")) : (cancel => ''),
-	 messages =>
-_("The per-user sharing uses the group \"fileshare\". 
-You can use userdrake to add a user in this group.")
-	}, [])) {
-	    if (!fork) { exec "userdrake" or c::_exit(0) }
-	}
-    }
-}
-
-sub ddcxinfos {
-    my @l = `$ENV{LD_LOADER} ddcxinfos`;
-    if ($::isInstall && -e "/tmp/ddcxinfos") {
-	my @l_old = cat_("/tmp/ddcxinfos");
-	if (@l < @l_old) {
-	    log::l("new ddcxinfos is worse, keeping the previous one");
-	    @l = @l_old;
-	} elsif (@l > @l_old) {
-	    log::l("new ddcxinfos is better, dropping the previous one");
-	}
-    }
-    output("/tmp/ddcxinfos", @l) if $::isInstall;
-    @l;
-}
-
-sub config_libsafe {
-    my ($prefix, $libsafe) = @_;
-    my %t = getVarsFromSh("$prefix/etc/sysconfig/system");
-    if (@_ > 1) {
-	$t{LIBSAFE} = bool2yesno($libsafe);
-	setVarsInSh("$prefix/etc/sysconfig/system", \%t);
-    }
-    text2bool($t{LIBSAFE});
-}
-
-sub choose_security_options {
-    my ($in, $security, $libsafe, $email, $options) = @_;
-    my $expert_file = "/etc/security/msec/expert_mode";
-		      
-    my @shown_options = ();
-    my $key = "";
-    my $i=0;
-    my $title;
-		        
-    my $expert_section = cat_($expert_file);
-
-    if ($expert_section == 0) { $title = _("DrakSec - Network Advanced Options"); }
-    elsif ($expert_section == 1) { $title = _("DrakSec - User Advanced Options"); }
-    elsif ($expert_section == 2) { $title = _("DrakSec - Server Advanced Options"); }
-
-    for $key (keys %$options) {
-       $shown_options[$i]->{label} = "$options->{$key}{label}";
-       $shown_options[$i]->{val} = $options->{$key}{val};
-       $shown_options[$i]->{list} = $options->{$key}{list};
-       $shown_options[$i]->{type} = $options->{$key}{type};
-       $i++;
-    }
-
-    $in->ask_from(
-         $title,
-         _("Choose advanced security options\n\n"),
-         [
-            @shown_options
-         ]
-    );
-}
-
-sub choose_security_level {
-    my ($in, $security, $libsafe) = @_;
-    my $expert_file = "/etc/security/msec/expert_mode";
-
-    my $email;
-
-    my %l = (
-      0 => _("Welcome To Crackers"),
-      1 => _("Poor"),
-      2 => _("Standard"),
-      3 => _("High"),
-      4 => _("Higher"),
-      5 => _("Paranoid"),
-    );
-    my %help = (
-      0 => _("This level is to be used with care. It makes your system more easy to use,
-but very sensitive: it must not be used for a machine connected to others
-or to the Internet. There is no password access."),
-      1 => _("Password are now enabled, but use as a networked computer is still not recommended."),
-      2 => _("This is the standard security recommended for a computer that will be used to connect to the Internet as a client."),
-      3 => _("There are already some restrictions, and more automatic checks are run every night."),
-      4 => _("With this security level, the use of this system as a server becomes possible.
-The security is now high enough to use the system as a server which can accept
-connections from many clients. Note: if your machine is only a client on the Internet, you should better choose a lower level."),
-      5 => _("This is similar to the previous level, but the system is entirely closed and security features are at their maximum."),
-    );
-    delete @l{0,1};
-    delete $l{5} if !$::expert;
-
-    $in->ask_from(
-            ("DrakSec Basic Options"),
-            ("Please choose the desired security level") . "\n\n" .
-            join('', map { "$l{$_}: " . formatAlaTeX($help{$_}) . "\n\n" } keys %l),
-            [
-              { label => _("Security level"), val => $security, list => [ sort keys %l ], format => sub { $l{$_} } },
-                if_($in->do_pkgs->is_installed('libsafe') && arch() =~ /^i.86/,
-                { label => _("Use libsafe for servers"), val => $libsafe, type => 'bool', text =>
-                  _("A library which defends against buffer overflow and format string attacks.") } ),
-                { label => _("Security user (login or email)"), val => $email, },
-                { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "0"; close EXPERT; },
-                  val => _("NETWORK-RELATED SECURITY OPTIONS") },
-                { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "1"; close EXPERT; },
-                  val => _("USER-RELATED SECURITY OPTIONS") },
-                { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "2"; close EXPERT; },
-                  val => _("SERVER-RELATED SECURITY OPTIONS") }
-            ],
-    );
-													 }
-
-sub running_window_manager {
-    my @window_managers = (
-	'kdeinit: kwin', 
-	qw(gnome-session icewm wmaker kwm afterstep fvwm fvwm2 fvwm95 mwm twm enlightenment xfce blackbox sawfish olvwm),
-    );
-    foreach (@window_managers) {
-	return $_ if `/sbin/pidof "$_"` > 0;
-    }
-    '';
-}
-
-sub ask_window_manager_to_logout {
-    my ($wm) = @_;
-    
-    my %h = (
-	'kwm' => "kwmcom logout",
-	'kdeinit: kwin' => "su $ENV{USER} -c 'dcop kdesktop default logout'",
-	'gnome-session' => "save-session --kill",
-	'icewm' => "killall -QUIT icewm",
-    );
-    system($h{$wm} || return);
-    1;
-}
-
-sub get_secure_level {
-    my ($prefix) = @_;
-
-    cat_("/etc/profile")           =~ /export SECURE_LEVEL=(\d+)/ && $1 || #- 8.0 msec
-    cat_("/etc/profile.d/msec.sh") =~ /export SECURE_LEVEL=(\d+)/ && $1 || #- 8.1 msec
-      ${{ getVarsFromSh("$prefix/etc/sysconfig/msec") }}{SECURE_LEVEL}  || #- 8.2 msec
-	$ENV{SECURE_LEVEL};
-}
-
-sub alloc_raw_device {
-    my ($prefix, $device) = @_;
-    my $used = 0;
-    my $raw_dev;
-    substInFile {
-	$used = max($used, $1) if m|^\s*/dev/raw/raw(\d+)|;
-	if (eof) {
-	    $raw_dev = "raw/raw" . ($used + 1);
-	    $_ .= "/dev/$raw_dev /dev/$device\n";
-	}
-    } "$prefix/etc/sysconfig/rawdevices";
-    $raw_dev;
-}
-
-sub config_dvd {
-    my ($prefix) = @_;
-    if (my @dvds = grep { detect_devices::isDvdDrive($_) } detect_devices::cdroms__faking_ide_scsi()) {
-	log::l("configuring DVD");
-	#- create /dev/dvd symlink
-	each_index {
-	    devfssymlinkf($_->{device}, 'dvd' . ($::i ? $::i + 1 : ''), $prefix);
-	} @dvds;
-	if (my $raw_dev = alloc_raw_device($prefix, 'dvd')) {
-	    devfssymlinkf($raw_dev, 'rdvd', $prefix);
-	}	
-    }
-}
-
-sub config_mtools {
-    my ($prefix) = @_;
-    my ($f1, $f2) = detect_devices::floppies_dev();
-    substInFile {
-	s|drive a: file="(.*?)"|drive a: file="/dev/$f1"|;
-	s|drive b: file="(.*?)"|drive b: file="/dev/$f2"| if $f2;
-    } "$prefix/etc/mtools.conf"
-}
-
-1;
diff --git a/perl-install/apps.net_monitor b/perl-install/apps.net_monitor
deleted file mode 100644
index d4dea7f88..000000000
--- a/perl-install/apps.net_monitor
+++ /dev/null
@@ -1,4 +0,0 @@
-USER=root
-PROGRAM=/usr/sbin/net_monitor.real
-SESSION=true
-FALLBACK=false
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
deleted file mode 100644
index df290424d..000000000
--- a/perl-install/bootloader.pm
+++ /dev/null
@@ -1,1073 +0,0 @@
-package bootloader; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%vga_modes);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use log;
-use any;
-use fsedit;
-use devices;
-use loopback;
-use detect_devices;
-use partition_table_raw;
-use run_program;
-use modules;
-
-
-%vga_modes = (
-'ask' => "Ask at boot",
-'normal' => "Normal",
-'0x0f01' => "80x50",
-'0x0f02' => "80x43",
-'0x0f03' => "80x28",
-'0x0f05' => "80x30",
-'0x0f06' => "80x34",
-'0x0f07' => "80x60",
-'0x0122' => "100x30",
- 785 => "640x480 in 16 bits (FrameBuffer only)",
- 788 => "800x600 in 16 bits (FrameBuffer only)",
- 791 => "1024x768 in 16 bits (FrameBuffer only)",
- 794 => "1280x1024 in 16 bits (FrameBuffer only)",
-);
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-sub get {
-    my ($kernel, $bootloader) = @_;
-    $_->{kernel_or_dev} && $_->{kernel_or_dev} eq $kernel and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-sub get_label {
-    my ($label, $bootloader) = @_;
-    $_->{label} && $_->{label} eq $label and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-
-sub mkinitrd($$$) {
-    my ($prefix, $kernelVersion, $initrdImage) = @_;
-
-    $::oem or $::testing || -e "$prefix/$initrdImage" and return;
-
-    my $loop_boot = loopback::prepare_boot($prefix);
-
-    modules::load('loop');
-    run_program::rooted($prefix, "mkinitrd", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion) or unlink("$prefix/$initrdImage");
-
-    loopback::save_boot($loop_boot);
-
-    -e "$prefix/$initrdImage" or die "mkinitrd failed";
-}
-
-sub mkbootdisk($$$;$) {
-    my ($prefix, $kernelVersion, $dev, $append) = @_;
-
-    modules::load(if_(arch() =~ /sparc/, 'romfs'), 'loop');
-    my @l = qw(mkbootdisk --noprompt); 
-    push @l, "--appendargs", $append if $append;
-    eval { modules::load('vfat') };
-    run_program::rooted_or_die($prefix, @l, "--device", "/dev/$dev", $kernelVersion);
-}
-
-sub read($$) {
-    my ($prefix, $file) = @_;
-    my $global = 1;
-    my ($e, $v, $f);
-    my %b;
-    foreach (cat_("$prefix$file")) {
-	($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
-
-	if (/^(image|other)$/) {
-	    if (arch() =~ /ppc/) {
-		$v =~ s/hd:\d+,//g;
-	    }   
-	    push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
-	    $global = 0;
-	} elsif ($global) {
-	    if ($_ eq 'disk' && $v =~ /(\S+)\s+bios\s*=\s*(\S+)/) {
-		$b{bios}{$1} = $2;
-	    } elsif ($_ eq 'bios') {
-		$b{bios}{$b{disk}} = $v;
-	    } elsif ($_ eq 'init-message') {
-		$v =~ s/\\n//g; 
-		$v =~ s/"//g;
-		$b{'init-message'} = $v;
-	    } else {
-		$b{$_} = $v || 1;
-	    }
-	} else {
-	    if ((/map-drive/ .. /to/) && /to/) {
-		$e->{mapdrive}{$e->{'map-drive'}} = $v;
-	    } else {
-		if (arch() =~ /ppc/) {
-		    $v =~ s/hd:\d+,//g;
-		    $v =~ s/"//g;
-		}
-		$e->{$_} = $v || 1;
-	    }
-	}
-    }
-    if (arch() !~ /ppc/) {
-	delete $b{timeout} unless $b{prompt};
-	$_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
-	$b{timeout} = $b{timeout} / 10 if $b{timeout};
-	$b{message} = cat_("$prefix$b{message}") if $b{message};
-    }
-    \%b;
-}
-
-sub suggest_onmbr {
-    my ($hds) = @_;
-    
-    my $type = partition_table_raw::typeOfMBR($hds->[0]{device});
-    !$type || member($type, qw(dos dummy lilo grub empty)), !$type;
-}
-
-sub compare_entries ($$) {
-    my ($a, $b) = @_;
-    my %entries;
-
-    @entries{keys %$a, keys %$b} = ();
-    $a->{$_} eq $b->{$_} and delete $entries{$_} foreach keys %entries;
-    scalar keys %entries;
-}
-
-sub add_entry($$) {
-    my ($entries, $v) = @_;
-    my (%usedold, $freeold);
-
-    do { $usedold{$1 || 0} = 1 if $_->{label} =~ /^old([^_]*)_/ } foreach @$entries;
-    foreach (0..scalar keys %usedold) { exists $usedold{$_} or $freeold = $_ || '', last }
-
-    foreach (@$entries) {
-	if ($_->{label} eq $v->{label}) {
-	    compare_entries($_, $v) or return; #- avoid inserting it twice as another entry already exists !
-	    $_->{label} = "old${freeold}_$_->{label}";
-	}
-    }
-    push @$entries, $v;
-}
-
-sub add_kernel {
-    my ($prefix, $lilo, $version, $ext, $root, $v) = @_;
-
-    #- new versions of yaboot don't handle symlinks
-    my $ppcext = $ext;
-    if (arch() =~ /ppc/) {
-	$ext = "-$version";
-    }
-
-    log::l("adding vmlinuz$ext as vmlinuz-$version");
-    -e "$prefix/boot/vmlinuz-$version" or log::l("unable to find kernel image $prefix/boot/vmlinuz-$version"), return;
-    my $image = "/boot/vmlinuz" . ($ext ne "-$version" &&
-				   symlinkf("vmlinuz-$version", "$prefix/boot/vmlinuz$ext") ? $ext : "-$version");
-    my $initrd = eval { 
-	mkinitrd($prefix, $version, "/boot/initrd-$version.img");
-	"/boot/initrd" . ($ext ne "-$version" &&
-			  symlinkf("initrd-$version.img", "$prefix/boot/initrd$ext.img") ? $ext : "-$version") . ".img";
-    };
-    my $label = $ext =~ /-(default)/ ? $1 : "linux$ext";
-
-    #- more yaboot concessions - PPC
-    if (arch() =~ /ppc/) {
-	$label = $ppcext =~ /-(default)/ ? $1 : "linux$ppcext";
-    }
-
-    add2hash($v,
-	     {
-	      type => 'image',
-	      root => "/dev/$root",
-	      label => $label,
-	      kernel_or_dev => $image,
-	      initrd => $initrd,
-	      append => $lilo->{perImageAppend},
-	     });
-    add_entry($lilo->{entries}, $v);
-    $v;
-}
-
-sub unpack_append {
-    my ($s) = @_;
-    my @l = split(' ', $s);
-    [ grep { !/=/ } @l ], [ map { if_(/(.*?)=(.*)/, [$1, $2]) } @l ];
-}
-sub pack_append {
-    my ($simple, $dict) = @_;
-    join(' ', @$simple, map { "$_->[0]=$_->[1]" } @$dict);
-}
-
-sub append__mem_is_memsize { $_[0] =~ /^\d+[kM]?$/i }
-
-sub get_append {
-    my ($b, $key) = @_;
-    my (undef, $dict) = unpack_append($b->{perImageAppend});
-    my @l = map { $_->[1] } grep { $_->[0] eq $key } @$dict;
-
-    #- suppose we want the memsize
-    @l = grep { append__mem_is_memsize($_) } @l if $key eq 'mem';
-
-    log::l("more than one $key in $b->{perImageAppend}") if @l > 1;
-    $l[0];
-}
-sub add_append {
-    my ($b, $key, $val) = @_;
-
-    foreach (\$b->{perImageAppend}, map { \$_->{append} } grep { $_->{type} eq 'image' } @{$b->{entries}}) {
-	my ($simple, $dict) = unpack_append($$_);
-	@$dict = grep { $_->[0] ne $key || $key eq 'mem' && append__mem_is_memsize($_->[1]) != append__mem_is_memsize($val) } @$dict;
-	push @$dict, [ $key, $val ] if $val;
-	$$_ = pack_append($simple, $dict);
-	log::l("add_append: $$_");
-    }
-}
-sub may_append {
-    my ($b, $key, $val) = @_;
-    add_append($b, $key, $val) if !get_append($b, $key);
-}
-
-sub configure_entry($$) {
-    my ($prefix, $entry) = @_;
-    if ($entry->{type} eq 'image') {
-	my $specific_version;
-	$entry->{kernel_or_dev} =~ /vmlinu.-(.*)/ and $specific_version = $1;
-	readlink("$prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
-
-	if ($specific_version) {
-	    $entry->{initrd} or $entry->{initrd} = "/boot/initrd-$specific_version.img";
-	    if (! -e "$prefix/$entry->{initrd}" || $::oem) {
-		eval { mkinitrd($prefix, $specific_version, "$entry->{initrd}") };
-		undef $entry->{initrd} if $@;
-	    }
-	}
-    }
-    $entry;
-}
-
-sub dev2prompath { #- SPARC only
-    my ($dev) = @_;
-    my ($wd, $num) = $dev =~ /^(.*\D)(\d*)$/;
-    require c;
-    $dev = c::disk2PromPath($wd) and $dev = $dev =~ /^sd\(/ ? "$dev$num" : "$dev;$num";
-    $dev;
-}
-
-sub get_kernels_and_labels {
-    my ($prefix) = @_;
-    my $dir = "$prefix/boot";
-    my @l = grep { /^vmlinuz-/ } all($dir);
-    my @kernels = grep { ! -l "$dir/$_" } @l;
-
-    my @preferred = ('', 'secure', 'enterprise', 'smp');
-    my %weights = map_index { $_ => $::i } @preferred;
-    
-    require pkgs;
-    @kernels = 
-      sort { pkgs::versionCompare($b->[1], $a->[1]) || $weights{$a->[2]} <=> $weights{$b->[2]} } 
-      map {
-	  if (my ($version, $ext) = /vmlinuz-((?:[\-.\d]*(?:mdk)?)*)(.*)/) {
-	      [ "$version$ext", $version, $ext ];
-	  } else {
-	      log::l("non recognised kernel name $_");
-	      ();
-	  }
-      } @kernels;
-
-    my %majors;
-    foreach (@kernels) {
-	push @{$majors{$1}}, $_ if $_->[1] =~ /^(2\.\d+)/
-    }
-    while (my ($major, $l) = each %majors) {
-	$l->[0][1] = $major if @$l == 1;
-    }
-
-    my %labels;
-    foreach (@kernels) {
-	my ($complete_version, $version, $ext) = @$_;
-	my $label = '';
-	if (exists $labels{$label}) {
-	    $label = "-$ext";
-	    if (!$ext || $labels{$label}) {
-		$label = "-$version$ext";
-	    }
-	}
-	$labels{$label} = $complete_version;
-    }
-    %labels;
-}
-
-sub suggest {
-    my ($prefix, $lilo, $hds, $fstab, $vga_fb, $quiet) = @_;
-    my $root_part = fsedit::get_root($fstab);
-    my $root = isLoopback($root_part) ? "loop7" : $root_part->{device};
-    my $boot = fsedit::get_root($fstab, 'boot')->{device};
-    my $partition = first($boot =~ /\D*(\d*)/);
-    #- PPC xfs module requires enlarged initrd
-    my $xfsroot = isThisFs("xfs", $root_part);
-
-    require c; c::initSilo() if arch() =~ /sparc/;
-
-    my ($onmbr, $unsafe) = $lilo->{crushMbr} ? (1, 0) : suggest_onmbr($hds);
-    add2hash_($lilo, arch() =~ /sparc/ ?
-	{
-	 entries => [],
-	 timeout => 10,
-	 use_partition => 0, #- we should almost always have a whole disk partition.
-	 root          => "/dev/$root",
-	 partition     => $partition || 1,
-	 boot          => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
-	} : arch() =~ /ppc/ ?
-	{
-	 defaultos => "linux",
-	 entries => [],
-	 'init-message' => "Welcome to Mandrake Linux!",
-	 delay => 30,	#- OpenFirmware delay
-	 timeout => 50,
-	 enableofboot => 1,
-	 enablecdboot => 1,
-	 useboot => $boot,
-	 xfsroot => $xfsroot,
-	} :
-	{
-	 bootUnsafe => $unsafe,
-	 entries => [],
-	 timeout => $onmbr && 10,
-	 nowarn => 1,
-	   if_(arch() !~ /ia64/,
-	 lba32 => 1,
-	 boot => "/dev/" . ($onmbr ? $hds->[0]{device} : fsedit::get_root($fstab, 'boot')->{device}),
-	 map => "/boot/map",
-         ),
-	});
-
-    if (!$lilo->{message} || $lilo->{message} eq "1") {
-	$lilo->{message} = join('', cat_("$prefix/boot/message"));
-	if (!$lilo->{message}) {
-	    my $msg_en =
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-__("Welcome to %s the operating system chooser!
-
-Choose an operating system in the list above or
-wait %d seconds for default boot.
-
-");
-	    my $msg = translate($msg_en);
-	    #- use the english version if more than 20% of 8bits chars
-	    $msg = $msg_en if int(grep { $_ & 0x80 } unpack "c*", $msg) / length($msg) > 0.2;
-	    $lilo->{message} = sprintf $msg, arch() =~ /sparc/ ? "SILO" : "LILO", $lilo->{timeout};
-	}
-    }
-
-    add2hash_($lilo, { memsize => $1 }) if cat_("/proc/cmdline") =~ /\bmem=(\d+[KkMm]?)(?:\s.*)?$/;
-    if (my ($s, $port, $speed) = cat_("/proc/cmdline") =~ /console=(ttyS(\d),(\d+)\S*)/) {
-	log::l("serial console $s $port $speed");
-	add_append($lilo, 'console' => $s);
-	any::set_login_serial_console($prefix, $port, $speed);
-    }
-
-    my %labels = get_kernels_and_labels($prefix);
-    $labels{''} or die "no kernel installed";
-
-    while (my ($ext, $version) = each %labels) {
-	my $entry = add_kernel($prefix, $lilo, $version, $ext, $root,
-	       {
-		if_($vga_fb && $ext eq '', vga => $vga_fb), #- using framebuffer
-	       });
-	$entry->{append} .= " quiet" if $vga_fb && $version !~ /smp|enterprise/ && $quiet;
-
-	if ($vga_fb && $ext eq '') {
-	    add_kernel($prefix, $lilo, $version, $ext, $root, { label => 'linux-nonfb' });
-	}
-    }
-    my $failsafe = add_kernel($prefix, $lilo, $labels{''}, '', $root, { label => 'failsafe' });
-    $failsafe->{append} =~ s/devfs=mount/devfs=nomount/;
-    $failsafe->{append} .= " failsafe";
-
-    if (arch() =~ /sparc/) {
-	#- search for SunOS, it could be a really better approach to take into account
-	#- partition type for mounting point.
-	my $sunos = 0;
-	foreach (@$hds) {
-	    foreach (@{$_->{primary}{normal}}) {
-		my $path = $_->{device} =~ m|^/| && $_->{device} !~ m|^/dev/| ? $_->{device} : dev2prompath($_->{device});
-		add_entry($lilo->{entries},
-			  {
-			   type => 'other',
-			   kernel_or_dev => $path,
-			   label => "sunos"   . ($sunos++ ? $sunos : ''),
-			  }) if $path && isSunOS($_) && type2name($_->{type}) =~ /root/i;
-	    }
-	}
-    } elsif (arch() =~ /ppc/) {
-	#- if we identified a MacOS partition earlier - add it
-	if (defined $partition_table_mac::macos_part) {
-	    add_entry($lilo->{entries},
-		      {
-		       label => "macos",
-		       kernel_or_dev => $partition_table_mac::macos_part
-		      });
-	}
-    } elsif (arch() !~ /ia64/) {
-	#- search for dos (or windows) boot partition. Don't look in extended partitions!
-	my %nbs;
-	foreach (@$hds) {
-	    foreach (@{$_->{primary}{normal}}) {
-		my $label = isNT($_) ? 'NT' : isDos($_) ? 'dos' : 'windows';
-		add_entry($lilo->{entries},
-			  {
-			   type => 'other',
-			   kernel_or_dev => "/dev/$_->{device}",
-			   label => $label . ($nbs{$label}++ ? $nbs{$label} : ''),
-			     if_($_->{device} =~ /[1-4]$/, 
-			   table => "/dev/$_->{rootDevice}"
-				),
-			   unsafe => 1
-			  }) if isNT($_) || isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) });
-	    }
-	}
-    }
-    foreach ('secure', 'enterprise', 'smp') {
-	if (get_label("linux-$_", $lilo)) {
-	    $lilo->{default} ||= "linux-$_";
-	    last;
-	}
-    }
-    $lilo->{default} ||= "linux";
-
-    my %l = (
-	     yaboot => to_bool(arch() =~ /ppc/),
-	     silo => to_bool(arch() =~ /sparc/),
-	     lilo => to_bool(arch() !~ /sparc|ppc/) && !isLoopback(fsedit::get_root($fstab)),
-	     grub => to_bool(arch() !~ /sparc|ppc/ && !isRAID(fsedit::get_root($fstab))),
-	     loadlin => to_bool(arch() !~ /sparc|ppc/) && -e "/initrd/loopfs/lnx4win",
-	    );
-    unless ($lilo->{methods}) {
-	$lilo->{methods} ||= { map { $_ => 1 } grep { $l{$_} } keys %l };
-	if ($lilo->{methods}{lilo} && -e "$prefix/boot/message-graphic") {
-	    $lilo->{methods}{lilo} = "lilo-graphic";
-	    exists $lilo->{methods}{grub} and $lilo->{methods}{grub} = undef;
-	}
-    }
-}
-
-sub suggest_floppy {
-    my ($bootloader) = @_;
-
-    my $floppy = detect_devices::floppy() or return;
-    $floppy eq 'fd0' or log::l("suggest_floppy: not adding $floppy"), return;
-
-    add_entry($bootloader->{entries},
-      {
-       type => 'other',
-       kernel_or_dev => '/dev/fd0',
-       label => 'floppy',
-       unsafe => 1
-      });
-}
-
-sub keytable($$) {
-    my ($prefix, $f) = @_;
-    local $_ = $f;
-    if ($_ && !/\.klt$/) {
-	$f = "/boot/$_.klt";
-	run_program::rooted($prefix, "keytab-lilo.pl", ">", $f, $_) or undef $f;
-    }
-    $f && -r "$prefix/$f" && $f;
-}
-
-sub has_profiles { to_bool(get_label("office", $b)) }
-sub set_profiles {
-    my ($b, $want_profiles) = @_;
-
-    my $office = get_label("office", $b);
-    if ($want_profiles xor $office) {
-	my $e = get_label("linux", $b);
-	if ($want_profiles) {
-	    push @{$b->{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
-	    $e->{append} .= " prof=Home";
-	} else {
-	    # remove profiles
-	    $e->{append} =~ s/\s*prof=\w+//;
-	    @{$b->{entries}} = grep { $_ != $office } @{$b->{entries}};
-	}
-    }
-
-}
-
-sub get_of_dev($$) {
-	my ($prefix, $unix_dev) = @_;
-	#- don't care much for this - need to run ofpath rooted, and I need the result
-	#- In test mode, just run on "/", otherwise you can't get to the /proc files		
-	if ($::testing) {
-		$prefix = "";
-	}
-	run_program::rooted_or_die($prefix, "/usr/local/sbin/ofpath $unix_dev", ">", "/tmp/ofpath");
-	open(FILE, "$prefix/tmp/ofpath") || die "Can't open $prefix/tmp/ofpath";
-	my $of_dev = "";
-	local $_ = "";
-	while (<FILE>){
-		$of_dev = $_;
-	}
-	chop($of_dev);
-	my @del_file = ($prefix . "/tmp/ofpath");
-	unlink (@del_file);
-	log::l("OF Device: $of_dev");
-	$of_dev;
-}
-
-sub install_yaboot($$$) {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    $lilo->{prompt} = $lilo->{timeout};
-
-    if ($lilo->{message}) {
-	local *F;
-	open F, ">$prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
-    }
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/etc/yaboot.conf";
-	open F, ">$f" or die "cannot create yaboot config file: $f";
-	log::l("writing yaboot config to $f");
-
-	print F "#yaboot.conf - generated by DrakX";
-	print F "init-message=\"\\n$lilo->{'init-message'}\\n\"" if $lilo->{'init-message'};
-
-	if ($lilo->{boot}) {
-	    print F "boot=$lilo->{boot}";
-	    my $of_dev = get_of_dev($prefix, $lilo->{boot});
-	    print F "ofboot=$of_dev";
-	} else {
-	    die "no bootstrap partition defined."
-	}
-	
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(delay timeout);
-	print F "install=/usr/local/lib/yaboot/yaboot";
-	print F "magicboot=/usr/local/lib/yaboot/ofboot";
-	$lilo->{$_} and print F $_ foreach qw(enablecdboot enableofboot);
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(defaultos default);
-	#- print F "nonvram";
-	my $boot = "/dev/" . $lilo->{useboot} if $lilo->{useboot};
-		
-	foreach (@{$lilo->{entries}}) {
-
-	    if ($_->{type} eq "image") {
-		my $of_dev = '';
-		if (($boot !~ /$_->{root}/) && $boot) {
-		    $of_dev = get_of_dev($prefix, $boot);
-		    print F "$_->{type}=$of_dev," . substr($_->{kernel_or_dev}, 5);
-		} else {
-		    $of_dev = get_of_dev($prefix, $_->{root});    			
-		    print F "$_->{type}=$of_dev,$_->{kernel_or_dev}";
-		}
-		print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
-		print F "\troot=$_->{root}";
-		if (($boot !~ /$_->{root}/) && $boot) {
-		    print F "\tinitrd=$of_dev," . substr($_->{initrd}, 5) if $_->{initrd};
-		} else {
-		    print F "\tinitrd=$of_dev,$_->{initrd}" if $_->{initrd};
-		}
-		#- xfs module on PPC requires larger initrd - say 6MB?
-		print F "\tinitrd-size=6144" if $lilo->{xfsroot};
-		print F "\tappend=\" $_->{append}\"" if $_->{append};
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    } else {
-		my $of_dev = get_of_dev($prefix, $_->{kernel_or_dev});
-		print F "$_->{label}=$of_dev";		
-	    }
-	}
-    }
-    log::l("Installing boot loader...");
-    my $f = "$prefix/tmp/of_boot_dev";
-    my $of_dev = get_of_dev($prefix, $lilo->{boot});
-    output($f, "$of_dev\n");  
-    $::testing and return;
-    if (defined $install_steps_interactive::new_bootstrap) {
-	run_program::run("hformat", "$lilo->{boot}") or die "hformat failed";
-    }	
-    run_program::rooted_or_die($prefix, "/sbin/ybin", "2>", "/tmp/.error");
-    unlink "$prefix/tmp/.error";	
-}
-
-sub install_silo($$$) {
-    my ($prefix, $silo, $fstab) = @_;
-    my $boot = fsedit::get_root($fstab, 'boot')->{device};
-    my ($wd, $num) = $boot =~ /^(.*\D)(\d*)$/;
-
-    #- setup boot promvars for.
-    require c;
-    if ($boot =~ /^md/) {
-	#- get all mbr devices according to /boot are listed,
-	#- then join all zero based partition translated to prom with ';'.
-	#- keep bootdev with the first of above.
-	log::l("/boot is present on raid partition which is not currently supported for promvars");
-    } else {
-	if (!$silo->{use_partition}) {
-	    foreach (@$fstab) {
-		if (!$_->{start} && $_->{device} =~ /$wd/) {
-		    $boot = $_->{device};
-		    log::l("found a zero based partition in $wd as $boot");
-		    last;
-		}
-	    }
-	}
-	$silo->{bootalias} = c::disk2PromPath($boot);
-	$silo->{bootdev} = $silo->{bootalias};
-        log::l("preparing promvars for device=$boot");
-    }
-    c::hasAliases() or log::l("clearing promvars alias as non supported"), $silo->{bootalias} = '';
-
-    if ($silo->{message}) {
-	local *F;
-	open F, ">$prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
-    }
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
-	symlinkf "../boot/silo.conf", "$prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
-	open F, ">$f" or die "cannot create silo config file: $f";
-	log::l("writing silo config to $f");
-
-	$silo->{$_} and print F "$_=$silo->{$_}" foreach qw(partition root default append);
-	$silo->{$_} and print F $_ foreach qw(restricted);
-	print F "password=", $silo->{password} if $silo->{restricted} && $silo->{password}; #- also done by msec
-	print F "timeout=", round(10 * $silo->{timeout}) if $silo->{timeout};
-	print F "message=$silo->{boot}/message" if $silo->{message};
-
-	foreach (@{$silo->{entries}}) {#my ($v, $e) = each %{$silo->{entries}}) {
-	    my $type = "$_->{type}=$_->{kernel_or_dev}"; $type =~ s|/boot|$silo->{boot}|;
-	    print F $type;
-	    print F "\tlabel=$_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $initrd = $_->{initrd}; $initrd =~ s|/boot|$silo->{boot}|;
-		print F "\tpartition=$_->{partition}" if $_->{partition};
-		print F "\troot=$_->{root}" if $_->{root};
-		print F "\tinitrd=$initrd" if $_->{initrd};
-		print F "\tappend=\"$1\"" if $_->{append} =~ /^\s*"?(.*?)"?\s*$/;
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    }
-	}
-    }
-    log::l("Installing boot loader...");
-    $::testing and return;
-    run_program::rooted($prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or 
-        run_program::rooted_or_die($prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ());
-    unlink "$prefix/tmp/.error";
-
-    #- try writing in the prom.
-    log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
-    require c;
-    c::setPromVars($silo->{bootalias}, $silo->{bootdev});
-}
-
-sub make_label_lilo_compatible {
-    my ($label) = @_; 
-    $label = substr($label, 0, 15); #- lilo doesn't handle more than 15 char long labels
-    $label =~ s/\s/_/g; #- lilo doesn't like spaces
-    $label;
-}
-
-sub write_lilo_conf {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    $lilo->{prompt} = $lilo->{timeout};
-
-    delete $lilo->{linear} if $lilo->{lba32};
-
-    my $file2fullname = sub {
-	my ($file) = @_;
-	if (arch() =~ /ia64/) {
-	    (my $part, $file) = fsedit::file2part($prefix, $fstab, $file);
-	    my %hds = map_index { $_ => "hd$::i" } map { $_->{device} } 
-	      sort { isFat($b) <=> isFat($a) || $a->{device} cmp $b->{device} } fsedit::get_fstab(@$hds);
-	    %hds->{$part->{device}} . ":" . $file;
-	} else {
-	    $file
-	}
-    };
-
-    my %bios2dev = map_index { $::i => $_ } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot});
-    my %dev2bios = reverse %bios2dev;
-
-    if (is_empty_hash_ref($lilo->{bios} ||= {})) {
-	my $dev = $hds->[0]{device};
-	if ($dev2bios{$dev}) {
-	    log::l("Since we're booting on $bios2dev{0}, make it bios=0x80, whereas $dev is now " . (0x80 + $dev2bios{$dev}));
-	    $lilo->{bios}{"/dev/$bios2dev{0}"} = '0x80';
-	    $lilo->{bios}{"/dev/$dev"} = sprintf("0x%x", 0x80 + $dev2bios{$dev});
-	}
-	foreach (0 .. 3) {
-	    my ($letter) = $bios2dev{$_} =~ /hd([^ac])/; #- at least hda and hdc are handled correctly :-/
-	    next if $lilo->{bios}{"/dev/$bios2dev{$_}"} || !$letter;
-	    next if 
-	      $_ > 0	     #- always print if first disk is hdb, hdd, hde...
-		&& $bios2dev{$_ - 1} eq "hd" . chr(ord($letter) - 1);
-	    #- no need to help lilo with hdb (resp. hdd, hdf...)
-	    log::l("Helping lilo: $bios2dev{$_} must be " . (0x80 + $_));
-	    $lilo->{bios}{"/dev/$bios2dev{$_}"} = sprintf("0x%x", 0x80 + $_);
-	}
-    }
-
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = arch() =~ /ia64/ ? "$prefix/boot/efi/elilo.conf" : "$prefix/etc/lilo.conf";
-
-	open F, ">$f" or die "cannot create lilo config file: $f";
-	log::l("writing lilo config to $f");
-
-	chmod 0600, $f if $lilo->{password};
-
-	#- normalize: RESTRICTED is only valid if PASSWORD is set
-	delete $lilo->{restricted} if !$lilo->{password};
-
-	local $lilo->{default} = make_label_lilo_compatible($lilo->{default});
-	$lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(boot map install vga default keytable);
-	$lilo->{$_} and print F $_ foreach qw(linear lba32 compact prompt nowarn restricted);
-	print F "append=\"$lilo->{append}\"" if $lilo->{append};
- 	print F "password=", $lilo->{password} if $lilo->{password}; #- also done by msec
-	print F "timeout=", round(10 * $lilo->{timeout}) if $lilo->{timeout};
-	print F "serial=", $1 if get_append($lilo, 'console') =~ /ttyS(.*)/;
-
-	print F "message=/boot/message" if (arch() !~ /ia64/);
-	print F "menu-scheme=wb:bw:wb:bw" if (arch() !~ /ia64/);
-
-	print F "ignore-table" if grep { $_->{unsafe} && $_->{table} } @{$lilo->{entries}};
-
-	while (my ($dev, $bios) = each %{$lilo->{bios}}) {
-	    print F "disk=$dev bios=$bios";
-	}
-
-	foreach (@{$lilo->{entries}}) {
-	    print F "$_->{type}=", $file2fullname->($_->{kernel_or_dev});
-	    print F "\tlabel=", make_label_lilo_compatible($_->{label});
-
-	    if ($_->{type} eq "image") {		
-		print F "\troot=$_->{root}" if $_->{root};
-		print F "\tinitrd=", $file2fullname->($_->{initrd}) if $_->{initrd};
-		print F "\tappend=\"$_->{append}\"" if $_->{append};
-		print F "\tvga=$_->{vga}" if $_->{vga};
-		print F "\tread-write" if $_->{'read-write'};
-		print F "\tread-only" if !$_->{'read-write'};
-	    } else {
-		print F "\ttable=$_->{table}" if $_->{table};
-		print F "\tunsafe" if $_->{unsafe} && !$_->{table};
-		
-		if (my ($dev) = $_->{table} =~ m|/dev/(.*)|) {
-		    if ($dev2bios{$dev}) {
-			#- boot off the nth drive, so reverse the BIOS maps
-			my $nb = sprintf("0x%x", 0x80 + $dev2bios{$dev});
-			$_->{mapdrive} ||= { '0x80' => $nb, $nb => '0x80' }; 
-		    }
-		}
-		while (my ($from, $to) = each %{$_->{mapdrive} || {}}) {
-		    print F "\tmap-drive=$from";
-		    print F "\t   to=$to";
-		}
-	    }
-	}
-    }
-}
-
-sub install_lilo {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    $lilo->{install} = 'text' if $lilo->{methods}{lilo} eq 'lilo-text';
-    output("$prefix/boot/message-text", $lilo->{message}) if $lilo->{message};
-    symlinkf "message-" . ($lilo->{methods}{lilo} eq 'lilo-graphic' ? 'graphic' : 'text'), "$prefix/boot/message";
-
-    write_lilo_conf($prefix, $lilo, $fstab, $hds);
-
-    log::l("Installing boot loader...");
-    $::testing and return;
-    run_program::rooted_or_die($prefix, "lilo", "2>", "/tmp/.error") if (arch() !~ /ia64/);
-    unlink "$prefix/tmp/.error";
-}
-
-sub dev2bios {
-    my ($hds, $where) = @_;
-    $where =~ s|/dev/||;
-    my @dev = map { $_->{device} } @$hds;
-    member($where, @dev) or ($where) = @dev; #- if not on mbr, 
-
-    s/h(d[e-g])/x$1/ foreach $where, @dev; #- emulates ultra66 as xd_
-
-    my $start = substr($where, 0, 2);
-
-    my $translate = sub {
-	$_ eq $where ? "aaa" : #- if exact match, value it first
-	  /^$start(.*)/ ? "ad$1" : #- if same class (ide/scsi/ultra66), value it before other classes
-	    $_;
-    };
-    @dev = map { $_->[0] }
-           sort { $a->[1] cmp $b->[1] }
-	   map { [ $_, &$translate ] } @dev;
-
-    s/x(d.)/h$1/ foreach @dev; #- switch back;
-
-    @dev;
-}
-
-sub dev2grub {
-    my ($dev, $dev2bios) = @_;
-    $dev =~ m|^(/dev/)?(...)(.*)$| or die "dev2grub (bad device $dev), caller is " . join(":", caller());
-    my $grub = $dev2bios->{$2} or die "dev2grub ($2)";
-    "($grub" . ($3 && "," . ($3 - 1)) . ")";
-}
-
-sub write_grub_config {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-    my %dev2bios = (
-      (map_index { $_ => "fd$::i" } detect_devices::floppies_dev()),
-      (map_index { $_ => "hd$::i" } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot})),
-    );
-
-    {
-	my %bios2dev = reverse %dev2bios;
-	output "$prefix/boot/grub/device.map", 
-	  join '', map { "($_) /dev/$bios2dev{$_}\n" } sort keys %bios2dev;
-    }
-    my $bootIsReiser = isThisFs("reiserfs", fsedit::get_root($fstab, 'boot'));
-    my $file2grub = sub {
-	my ($part, $file) = fsedit::file2part($prefix, $fstab, $_[0], 'keep_simple_symlinks');
-	dev2grub($part->{device}, \%dev2bios) . $file;
-    };
-    {
-	local *F;
-        local $\ = "\n";
-	my $f = "$prefix/boot/grub/menu.lst";
-	open F, ">$f" or die "cannot create grub config file: $f";
-	log::l("writing grub config to $f");
-
-	$lilo->{$_} and print F "$_ $lilo->{$_}" foreach qw(timeout);
-
-	print F "color black/cyan yellow/cyan";
-	print F "i18n ", $file2grub->("/boot/grub/messages");
-	print F "keytable ", $file2grub->($lilo->{keytable}) if $lilo->{keytable};
-	print F "serial --unit=$1 --speed=$2\nterminal --timeout=" . ($lilo->{timeout} || 0) . " console serial" if get_append($lilo, 'console') =~ /ttyS(\d),(\d+)/;
-
-	#- since we use notail in reiserfs, altconfigfile is broken :-(
-	unless ($bootIsReiser) {
-	    print F "altconfigfile ", $file2grub->(my $once = "/boot/grub/menu.once");
-	    output "$prefix$once", " " x 100;
-	}
-
-	map_index {
-	    print F "default $::i" if $_->{label} eq $lilo->{default};
-	} @{$lilo->{entries}};
-
-	foreach (@{$lilo->{entries}}) {
-	    print F "\ntitle $_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $vga = $_->{vga} || $lilo->{vga};
-		printf F "kernel %s root=%s %s%s%s\n",
-		  $file2grub->($_->{kernel_or_dev}),
-		  $_->{root} =~ /loop7/ ? "707" : $_->{root}, #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-		  $_->{append},
-		  $_->{'read-write'} && " rw",
-		  $vga && $vga ne "normal" && " vga=$vga";
-		print F "initrd ", $file2grub->($_->{initrd}) if $_->{initrd};
-	    } else {
-		print F "root ", dev2grub($_->{kernel_or_dev}, \%dev2bios);
-		if ($_->{kernel_or_dev} !~ /fd/) {
-		    #- boot off the second drive, so reverse the BIOS maps
-		    $_->{mapdrive} ||= { '0x80' => '0x81', '0x81' => '0x80' } 
-		      if $_->{table} && ($lilo->{first_hd_device} || $lilo->{boot}) !~ /$_->{table}/;
-	    
-		    map_each { print F "map ($::b) ($::a)" } %{$_->{mapdrive} || {}};
-
-		    print F "makeactive";
-		}
-		print F "chainloader +1";
-	    }
-	}
-    }
-    my $hd = fsedit::get_root($fstab, 'boot')->{rootDevice};
-
-    my $dev = dev2grub($lilo->{first_hd_device} || $lilo->{boot}, \%dev2bios);
-    my ($s1, $s2, $m) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
-    my $f = "/boot/grub/install.sh";
-    output "$prefix$f",
-"grub --device-map=/boot/grub/device.map --batch <<EOF
-install $s1 d $dev $s2 p $m
-quit
-EOF
-";
-
-     output "$prefix/boot/grub/messages", map { substr(translate($_) . "\n", 0, 78) } ( #- ensure the translated messages are not too big the hard way
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Welcome to GRUB the operating system chooser!"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Use the %c and %c keys for selecting which entry is highlighted."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Press enter to boot the selected OS, \'e\' to edit the"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("commands before booting, or \'c\' for a command-line."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("The highlighted entry will be booted automatically in %d seconds."),
-);
-   
-    my $e = "$prefix/boot/.enough_space";
-    output $e, 1; -s $e or die _("not enough room in /boot");
-    unlink $e;
-    $f;
-}
-
-sub install_grub {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    my $f = write_grub_config($prefix, $lilo, $fstab, $hds);
-
-    log::l("Installing boot loader...");
-    $::testing and return;
-    symlink "$prefix/boot", "/boot";
-    run_program::run_or_die("sh", $f);
-    unlink "$prefix/tmp/.error.grub", "/boot";
-}
-
-sub lnx4win_file { 
-    my $lilo = shift;
-    map { local $_ = $_; s,/,\\,g; "$lilo->{boot_drive}:\\lnx4win$_" } @_;
-}
-
-sub loadlin_cmd {
-    my ($prefix, $lilo) = @_;
-    my $e = get_label("linux", $lilo) || first(grep { $_->{type} eq "image" } @{$lilo->{entries}});
-
-    cp_af("$prefix$e->{kernel_or_dev}", "$prefix/boot/vmlinuz") unless -e "$prefix/boot/vmlinuz";
-    cp_af("$prefix$e->{initrd}", "$prefix/boot/initrd.img") unless -e "$prefix/boot/initrd.img";
-
-    $e->{label}, sprintf"%s %s initrd=%s root=%s $e->{append}", 
-      lnx4win_file($lilo, "/loadlin.exe", "/boot/vmlinuz", "/boot/initrd.img"),
-	$e->{root} =~ /loop7/ ? "0707" : $e->{root}; #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-}
-
-sub install_loadlin {
-    my ($prefix, $lilo, $fstab) = @_;
-
-    my $boot;
-    ($boot) = grep { $lilo->{boot} eq "/dev/$_->{device}" } @$fstab;
-    ($boot) = grep { loopback::carryRootLoopback($_) } @$fstab unless $boot && $boot->{device_windobe};
-    ($boot) = grep { isFat($_) } @$fstab unless $boot && $boot->{device_windobe};
-    log::l("loadlin device is $boot->{device} (windobe $boot->{device_windobe})");
-    $lilo->{boot_drive} = $boot->{device_windobe};
-
-    my ($winpart) = grep { $_->{device_windobe} eq 'C' } @$fstab;
-    log::l("winpart is $winpart->{device}");
-    my $winhandle = any::inspect($winpart, $prefix, 'rw');
-    my $windrive = $winhandle->{dir};
-    log::l("windrive is $windrive");
-
-    my ($label, $cmd) = loadlin_cmd($prefix, $lilo);
-
-    #install_loadlin_config_sys($lilo, $windrive, $label, $cmd);
-    #install_loadlin_desktop($lilo, $windrive);
-
-    output "/initrd/loopfs/lnx4win/linux.bat", unix2dos(
-'@echo off
-echo Mandrake Linux
-smartdrv /C
-' . "$cmd\n");
-
-}
-
-sub install_loadlin_config_sys {
-    my ($lilo, $windrive, $label, $cmd) = @_;
-
-    my $config_sys = "$windrive/config.sys";
-    local $_ = cat_($config_sys);
-    output "$windrive/config.mdk", $_ if $_;
-    
-    my $timeout = $lilo->{timeout} || 1;
-
-    $_ = "
-[Menu]
-menuitem=Windows
-menudefault=Windows,$timeout
-
-[Windows]
-" . $_ if !/^\Q[Menu]/m;
-
-    #- remove existing entry
-    s/^menuitem=$label\s*//mi;    
-    s/\n\[$label\].*?(\n\[|$)/$1/si;
-
-    #- add entry
-    s/(.*\nmenuitem=[^\n]*)/$1\nmenuitem=$label/s;
-
-    $_ .= "
-[$label]
-shell=$cmd
-";
-    output $config_sys, unix2dos($_);
-}
-
-sub install_loadlin_desktop {
-    my ($lilo, $windrive) = @_;
-    my $windir = lc(cat_("$windrive/msdos.sys") =~ /^WinDir=.:\\(\S+)/m ? $1 : "windows");
-
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#-PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-    foreach (__("Desktop"),
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows 
-	     __("Start Menu")) {
-        my $d = "$windrive/$windir/" . translate($_);
-        -d $d or $d = "$windrive/$windir/$_";
-        -d $d or log::l("can't find windows $d directory"), next;
-        output "$d/Linux4Win.url", unix2dos(sprintf 
-q([InternetShortcut]
-URL=file:\lnx4win\lnx4win.exe
-WorkingDirectory=%s
-IconFile=%s
-IconIndex=0
-), lnx4win_file($lilo, "/", "/lnx4win.ico"));
-    }
-}
-
-
-sub install {
-    my ($prefix, $lilo, $fstab, $hds) = @_;
-
-    if (my ($p) = grep { $lilo->{boot} =~ /\Q$_->{device}/ } @$fstab) {
-	die _("You can't install the bootloader on a %s partition\n", partition_table::type2fs($p))
-	  if isThisFs('xfs', $p);
-    }
-    $lilo->{keytable} = keytable($prefix, $lilo->{keytable});
-
-    if (exists $lilo->{methods}{grub}) {
-	#- when lilo is selected, we don't try to install grub. 
-	#- just create the config file in case it may be useful
-	eval { write_grub_config($prefix, $lilo, $fstab, $hds) };
-    }
-
-    my %l = grep_each { $::b } %{$lilo->{methods}};
-    my @rcs = map {
-	c::is_secure_file('/tmp/.error') or die "can't ensure a safe /tmp/.error";
-	my $f = $bootloader::{"install_$_"} or die "unknown bootloader method $_";
-	eval { $f->(@_) };
-	$@;
-    } reverse sort keys %l; #- reverse sort for having grub installed after lilo if both are there.
-    
-    return if grep { !$_ } @rcs; #- at least one worked?
-    die first(map { $_ } @rcs);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/bootlook.pm b/perl-install/bootlook.pm
deleted file mode 100644
index 8747db249..000000000
--- a/perl-install/bootlook.pm
+++ /dev/null
@@ -1,321 +0,0 @@
-#!/usr/bin/perl -w
-
-# Control-center
-
-# Copyright (C) 2001 MandrakeSoft
-# Yves Duret <yduret at mandrakesoft.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-
-use MDK::Common;
-use Gtk;
-use Config;
-init Gtk;
-use POSIX;
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use standalone;
-use any;
-use bootloader;
-use fs;
-use my_gtk qw(:helpers :wrappers :ask);
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~/--embedded (\S*) (\S*)/;
-if ($::isEmbedded) {
-  print "EMBED\n";
-  print "XID : $::XID\n";
-  print "CCPID :  $::CCPID\n";
-}
-
-my $in = 'interactive'->vnew('su', 'default');
-local $_ = join '', @ARGV;
-
-/-h/ and die _("no help implemented yet.\n");
-/-version/ and die 'version: $Id$'."\n";
-
-my @winm;
-my @usernames;
-parse_etc_passwd();
-
-my $x_mode = isXlaunched();
-my $a_mode = (-e "/etc/aurora/Monitor") ? 1 : 0;
-my $l_mode = isAutologin();
-my %auto_mode = get_autologin("");
-my $inmain = 0;
-my $lilogrub = chomp_(`detectloader -q`);
-
-my $window = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window ("toplevel");
-$window->signal_connect(delete_event => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) });
-$window->set_title(_("Boot Style Configuration") );
-$window->border_width(2);
-#$window->realize;
-
-# drakX mode
-my ($t_pixmap, $t_mask) = gtkcreate_png("tradi.png");
-my ($h_pixmap, $h_mask) = gtkcreate_png("hori.png");
-my ($v_pixmap, $v_mask) = gtkcreate_png("verti.png");
-my ($g_pixmap, $g_mask) = gtkcreate_png("gmon.png");
-my ($c_pixmap, $c_mask) = gtkcreate_png("categ.png");
-
-# a pixmap widget to contain the pixmap
-my $pixmap = new Gtk::Pixmap($h_pixmap, $h_mask);
-
-### menus definition
-# the menus are not shown
-# but they provides shiny shortcut like C-q
-my @menu_items = ( { path => _("/_File"), type => '<Branch>' },
-		   { path => _("/File/_Quit"), accelerator => _("<control>Q"), callback    => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) } },
-		 );
-my $menubar = get_main_menu( $window );
-######### menus end
-
-my $user_combo = new Gtk::Combo;
-$user_combo->set_popdown_strings(@usernames);
-$user_combo->entry->set_text($auto_mode{autologin}) if ($auto_mode{autologin});
-my $desktop_combo =new Gtk::Combo;
-$desktop_combo->set_popdown_strings(get_wm());
-$desktop_combo->entry->set_text($auto_mode{desktop}) if ($auto_mode{desktop});
-my $a_c_button = new Gtk::RadioButton (_("NewStyle Categorizing Monitor"));
-my $a_h_button = new Gtk::RadioButton _("NewStyle Monitor"), $a_c_button;
-my $a_v_button = new Gtk::RadioButton _("Traditional Monitor"), $a_c_button;
-my $a_g_button = new Gtk::RadioButton _("Traditional Gtk+ Monitor"),$a_c_button ;
-my $a_button = new Gtk::CheckButton(_("Launch Aurora at boot time"));
-my $a_box = new Gtk::VBox(0, 0);
-my $x_box = new Gtk::VBox(0, 0);
-my $disp_mode = arch() =~ /ppc/ ? _("Yaboot mode") : _("Lilo/grub mode");
-gtkadd($window,
-       gtkpack__ (my $global_vbox = new Gtk::VBox(0,0),
-		  gtkadd (new Gtk::Frame ("$disp_mode"),
-#			  gtkpack__(new Gtk::VBox(0,0),
-				    (gtkpack_(gtkset_border_width(new Gtk::HBox(0, 0),5),
-					      1,_("You are currently using %s as your boot manager.
-Click on Configure to launch the setup wizard.", $lilogrub),
-					      0,gtksignal_connect(new Gtk::Button (_("Configure")), clicked => $::lilo_choice),
-					     )),
-#				    "" #we need some place under the button -- replaced by gtkset_border_width( for the moment
-#				   )
-				     
-			 ),
-		  # aurora
-# 		  gtkadd (new Gtk::Frame (_("Boot mode")),
-# 			  gtkpack__ (new Gtk::HBox(0,0),
-# 				     gtkpack__ (new Gtk::VBox(0, 5),
-# 						gtksignal_connect ($a_button, clicked => sub {
-# 								       if ($inmain) {
-# 									   $a_box->set_sensitive(!$a_mode);
-# 									   $a_mode = !$a_mode;
-# 									   if ($a_mode) {
-# 									       $pixmap->set($c_pixmap, $c_mask) if $a_c_button->get_active();
-# 									       $pixmap->set($h_pixmap, $h_mask) if $a_h_button->get_active();
-# 									       $pixmap->set($v_pixmap, $v_mask) if $a_v_button->get_active();
-# 									       $pixmap->set($g_pixmap, $g_mask) if $a_g_button->get_active();
-# 									   } else {
-# 									       $pixmap->set($t_pixmap, $t_mask);
-# 									   }
-# 										   }
-# 								   }),
-# 						gtkpack__ ( gtkset_sensitive ($a_box, $a_mode),
-# 							    gtksignal_connect ($a_c_button,clicked => sub{$pixmap->set($c_pixmap, $c_mask)}),
-# 							    gtksignal_connect ($a_h_button,clicked => sub{$pixmap->set($h_pixmap, $h_mask)}),
-# 							    gtksignal_connect ($a_v_button,clicked => sub{$pixmap->set($v_pixmap, $v_mask)}),
-# 							    gtksignal_connect ($a_g_button,clicked => sub{$pixmap->set($g_pixmap, $g_mask)})
-# 							  )
-# 					      ),
-# 				     gtkpack__ (new Gtk::HBox(0,0), $pixmap)
-# 				    )
-# 			 ),
-		  # X
-		  gtkadd (new Gtk::Frame (_("System mode")),
-			  gtkpack__ (new Gtk::VBox(0, 5),
-				     gtksignal_connect(gtkset_active(new Gtk::CheckButton (_("Launch the graphical environment when your system starts")), $x_mode ), clicked => sub {
-							   $x_box->set_sensitive(!$x_mode);
-							   $x_mode = !$x_mode;
-						       }),
-				     gtkpack__ (gtkset_sensitive ($x_box, $x_mode),
-						gtkset_active($x_no_button  = new Gtk::RadioButton (_("No, I don't want autologin")), !$l_mode),
-						gtkpack__ (new Gtk::HBox(0, 10),
-							   gtkset_active($x_yes_button = new Gtk::RadioButton((_("Yes, I want autologin with this (user, desktop)")), $x_no_button), $l_mode),
-							   gtkpack__ (new Gtk::VBox(0, 10),
-								      $user_combo,
-								      $desktop_combo
-								     )
-							  )
-					       )
-				    )
-			 ),
-		 gtkadd (gtkset_layout(new Gtk::HButtonBox,-end),
-			 gtksignal_connect(new Gtk::Button (_("OK")), clicked=>sub{updateInit();updateAutologin();updateAurora();$::isEmbedded ? kill(USR1,$::CCPID) : Gtk->exit(0)}),
-			 gtksignal_connect(new Gtk::Button (_("Cancel")), clicked => sub {$::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0)})
-			)
-	       )
-      );
-
-$a_button->set_active($a_mode); # up == false == "0"
-if ($a_mode) {
-    my $a = readlink "/etc/aurora/Monitor";
-    $a =~ s#/lib/aurora/Monitors/##;
-    if ($a eq "NewStyle-Categorizing-WsLib") {$a_c_button->set_active(1);  $pixmap->set($c_pixmap, $c_mask);}
-    if ($a eq "NewStyle-WsLib") {$a_h_button->set_active(1);  $pixmap->set($h_pixmap, $h_mask);}
-    if ($a eq "Traditional-WsLib") {$a_v_button->set_active(1); $pixmap->set($v_pixmap, $v_mask);}  
-    if ($a eq "Traditional-Gtk+") {$a_g_button->set_active(1); $pixmap->set($g_pixmap, $g_mask);}
-} else {
-    $pixmap->set($t_pixmap, $t_mask);
-}
-
-$window->show_all();
-Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill USR2, $::CCPID;
-$inmain=1;
-Gtk->main;
-Gtk->exit(0);
-
-#-------------------------------------------------------------
-# get user names to put in combo  
-#-------------------------------------------------------------
-
-sub parse_etc_passwd
-{
-    my ($uname, $uid);
-    setpwent();
-    do {
-	@user_info = getpwent();
-	($uname, $uid) = @user_info[0,2];
-	push (@usernames, $uname) if ($uid > 500) and !($uname eq "nobody");
-    } while (@user_info);
-}
-
-sub get_wm
-{
-    @winm = (split (' ', `/usr/sbin/chksession -l`));
-}
-
-#-------------------------------------------------------------
-# menu callback functions
-#-------------------------------------------------------------
-
-sub print_hello {
-  print( "mcdtg !\n" );
-}
-
-sub get_main_menu {
-  my ( $window ) = @_;
-
-  my $accel_group = new Gtk::AccelGroup();
-  my $item_factory = new Gtk::ItemFactory( 'Gtk::MenuBar', '<main>', $accel_group );
-  $item_factory->create_items( @menu_items );
-  $window->add_accel_group( $accel_group );
-  return ( $item_factory->get_widget( '<main>' ) );
-}
-
-#-------------------------------------------------------------
-# launch X functions
-#-------------------------------------------------------------
-
-sub isXlaunched {
-    my $line;
-    open INITTAB, "/etc/inittab" or die _("can not open /etc/inittab for reading: %s", $!);
-    while (<INITTAB>) {
-	if (/id:([1-6]):initdefault:/) { $line = $_; last; }
-    }
-    close INITTAB;
-    $line =~ s/id:([1-6]):initdefault:/$1/;
-    return ($line-3);
-}
-
-sub updateInit {
-    my $runlevel = ($x_mode) ? 5 : 3;
-    substInFile { s/^id:\d:initdefault:\s*$/id:$runlevel:initdefault:\n/ } "/etc/inittab";
-}
-
-#-------------------------------------------------------------
-# aurora functions
-#-------------------------------------------------------------
-
-
-
-sub updateAurora {
-    if ($a_mode) {
-        if ($a_c_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/NewStyle-Categorizing-WsLib",    "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-NewStyle-Categorizing-WsLib)) if !(-e "/lib/aurora/Monitors/NewStyle-Categorizing-WsLib");
-        }
-        if ($a_h_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/NewStyle-WsLib",    "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-NewStyle-WsLib)) if !(-e "/lib/aurora/Monitors/NewStyle-WsLib");
-        }
-        if ($a_v_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/Traditional-WsLib", "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-Traditional-WsLib)) if !(-e "/lib/aurora/Monitors/Traditional-WsLib");
-        }
-        if ($a_g_button->get_active()) {
-            symlinkf("/lib/aurora/Monitors/Traditional-Gtk+",  "/etc/aurora/Monitor");
-            $in->do_pkgs->install(q(Aurora-Monitor-Traditional-Gtk+)) if !(-e "/lib/aurora/Monitors/Traditional-Gtk+");
-	}
-    } else {
-	unlink "/etc/aurora/Monitor";
-    }
-    
-}
-
-#-------------------------------------------------------------
-# launch autologin functions
-#-------------------------------------------------------------
-
-sub isAutologin {
-    my $line;
-    open AUTOLOGIN, "/etc/sysconfig/autologin";
-    while (<AUTOLOGIN>) {
-	if (/AUTOLOGIN=(yes|no)/) { $line = $_; last; }
-    }
-    close AUTOLOGIN;
-    $line =~ s/AUTOLOGIN=(yes|no)/$1/;
-    chomp ($line);
-    $line =  ($line eq "yes");
-    my %au = get_autologin('');
-    return ($line && defined $au{autologin});
-}
-
-sub get_autologin {
-    my ($prefix) = @_;
-    my %o;
-    my %l = getVarsFromSh("$prefix/etc/sysconfig/autologin");
-
-    $o{autologin} = $l{USER};
-    %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
-    $o{desktop} = $l{DESKTOP};
-    %o;
-}
-
-sub updateAutologin {
-    my ($usern,$deskt)=($user_combo->entry->get_text(), $desktop_combo->entry->get_text());
-    if ($x_yes_button->get_active()) {
-	$in->do_pkgs->install('autologin') if $x_mode;
-	set_autologin('',$usern,$deskt);
-    } else {
-	set_autologin('',undef) if ($x_no_button->get_active());
-    }
-}
- 
-sub set_autologin {
-  my ($prefix, $user, $desktop) = @_;
-  output "$prefix/etc/sysconfig/desktop", uc($desktop), "\n" if $user;
-  setVarsInSh("$prefix/etc/sysconfig/autologin",
-	      { USER => $user, AUTOLOGIN => bool2yesno($user), EXEC => "/usr/X11R6/bin/startx" });
-  chmod 0600, "$prefix/etc/sysconfig/autologin";
-#  log::l("cat $prefix/etc/sysconfig/autologin: ", cat_("$prefix/etc/sysconfig/autologin"));
-}
-
-
diff --git a/perl-install/c.pm b/perl-install/c.pm
deleted file mode 100644
index aa03b9b1e..000000000
--- a/perl-install/c.pm
+++ /dev/null
@@ -1,19 +0,0 @@
-package c; # $Id$
-
-use vars qw($AUTOLOAD);
-
-use c::stuff;
-use MDK::Common;
-
-sub AUTOLOAD {
-    $AUTOLOAD =~ /::(.*)/;
-    my @l = eval { &{$c::stuff::{$1}} };
-    if (my $err = $@) {
-	$err =~ /Undefined subroutine &main::/ ?
-	  die("can't find function $AUTOLOAD\n" . backtrace()) :
-	  die($err);	
-    }
-    wantarray ? @l : $l[0];
-}
-
-1;
diff --git a/perl-install/c/.cvsignore b/perl-install/c/.cvsignore
deleted file mode 100644
index 665b57e54..000000000
--- a/perl-install/c/.cvsignore
+++ /dev/null
@@ -1,9 +0,0 @@
-Makefile
-Makefile_c
-stuff.c
-stuff.bs
-pm_to_blib
-Makefile_c.old
-blib
-stuff.xs
-pcmcia_probe.c
diff --git a/perl-install/c/Makefile b/perl-install/c/Makefile
deleted file mode 100644
index e58cab335..000000000
--- a/perl-install/c/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-.PHONY: clean
-
-C_RPM = 1
-C_DRAKX = 1
-
-stuff: %: %.xs
-	test -e Makefile_c || C_RPM=$(C_RPM) C_DRAKX=$(C_DRAKX) perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/c ; ln -s ../c/blib/arch/auto ../auto/c
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o stuff.xs pcmcia_probe.c
-
-stuff.xs: %: %.pm
-	rm -f $@
-	C_RPM=$(C_RPM) C_DRAKX=$(C_DRAKX) perl $< > $@
-	chmod a-w $@
diff --git a/perl-install/c/Makefile.PL b/perl-install/c/Makefile.PL
deleted file mode 100644
index 9a27c3592..000000000
--- a/perl-install/c/Makefile.PL
+++ /dev/null
@@ -1,23 +0,0 @@
-use ExtUtils::MakeMaker;
-use Config;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-my $libs = '-lldetect -lext2fs';
-$libs .= ' -L/usr/X11R6/lib -lX11 -lgdk -lXxf86misc' if $ENV{C_DRAKX};
-$libs .= ' -lrpm -lrpmdb -lrpmio -lpopt -lz' if $ENV{C_RPM};
-
-my $pcmcia_dir = $ENV{C_DRAKX} && $Config{archname} =~ /i.86/ ? '../../mdk-stage1/pcmcia_' : '';
-
-symlink "$pcmcia_dir/probe.c", "probe.c" if $pcmcia_dir;
-
-WriteMakefile(
-    'NAME'	=> 'stuff',
-    'OPTIMIZE'  => '-Os',
-    'MAKEFILE'  => 'Makefile_c',
-    'OBJECT'    => "stuff.o smp.o sbus.o silo.o" . ($pcmcia_dir && " probe.o"),
-    'VERSION_FROM' => 'stuff.pm', # finds $VERSION
-    'LIBS'	=> [$libs],   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-    'INC'	=> "-I/usr/include/rpm `gtk-config --cflags` `glib-config --cflags`" . ($pcmcia_dir && " -I$pcmcia_dir -I$pcmcia_dir/.."), 
-);
diff --git a/perl-install/c/README b/perl-install/c/README
deleted file mode 100644
index b5ad1224f..000000000
--- a/perl-install/c/README
+++ /dev/null
@@ -1,3 +0,0 @@
-md5.c, md5_crypt.c and md5.h are taken from pam (dir modules/pam_pwdb)
-
-smp.c is taken from RedHat's install
diff --git a/perl-install/c/sbus.c b/perl-install/c/sbus.c
deleted file mode 100644
index 85d44fa79..000000000
--- a/perl-install/c/sbus.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* This file is inspired from source code of kudzu from Red Hat, Inc.
- * It has been modified to keep only "what is needed" in C, the prom_walk
- * has been rewritten in perl for convenience :-)
- *
- * Copyright notice from original version.
- * sbus.c: Probe for Sun SBUS and UPA framebuffers using OpenPROM,
- *         SBUS SCSI and Ethernet cards and SBUS or EBUS audio chips.
- *
- * Copyright (C) 1998, 1999 Jakub Jelinek (jj@ultra.linux.cz)
- *           (C) 1999 Red Hat, Inc.
- * 
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- */
-
-#ifdef __sparc__
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-
-static char *promdev = "/dev/openprom";
-static int promfd = -1;
-static int prom_current_node;
-#define MAX_PROP        128
-#define MAX_VAL         (4096-128-4)
-static char buf[4096];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-int prom_open()
-{
-    int prom_root_node;
-
-    if (promfd == -1) {
-        promfd = open(promdev, O_RDONLY);
-	if (promfd == -1)
-	    return 0;
-    }
-    prom_root_node = prom_getsibling(0);
-    if (!prom_root_node) {
-        close(promfd);
-	promfd = -1;
-	return 0;
-    }
-    return prom_root_node;
-}
-
-void prom_close()
-{
-    if (promfd != -1) {
-        close(promfd);
-	promfd = -1;
-    }
-}
-
-int prom_getsibling(int node)
-{
-    DECL_OP(sizeof(int));
-        
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMNEXT, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-int prom_getchild(int node)
-{
-    DECL_OP(sizeof(int));
-        
-    if (!node || node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMCHILD, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-char *prom_getopt(char *var, int *lenp)
-{
-    DECL_OP(MAX_VAL);
-        
-    strcpy (op->oprom_array, var);
-    if (ioctl (promfd, OPROMGETOPT, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-void prom_setopt(char *var, char *value) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    strcpy (op->oprom_array + strlen (var) + 1, value);
-    ioctl (promfd, OPROMSETOPT, op);
-}
-
-char *prom_getproperty(char *prop, int *lenp)
-{
-    DECL_OP(MAX_VAL);
-        
-    strcpy (op->oprom_array, prop);
-    if (ioctl (promfd, OPROMGETPROP, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-int prom_getbool(char *prop)
-{
-    DECL_OP(0);
-
-    *(int *)op->oprom_array = 0;
-    for (;;) {
-        op->oprom_size = MAX_PROP;
-	if (ioctl(promfd, OPROMNXTPROP, op) < 0)
-	    return 0;
-	if (!op->oprom_size)
-	    return 0;
-	if (!strcmp (op->oprom_array, prop))
-	    return 1;
-    }
-}
-
-int prom_pci2node(int bus, int devfn) {
-    DECL_OP(2*sizeof(int));
-    
-    ((int *)op->oprom_array)[0] = bus;
-    ((int *)op->oprom_array)[1] = devfn;
-    if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-#else
-int prom_open() { return 0; }
-void prom_close() {}
-int prom_getsibling(int node) { return 0; }
-int prom_getchild(int node) { return 0; }
-char *prom_getopt(char *var, int *lenp) { return 0; /* NULL */ }
-void prom_setopt(char *var, char *value) {}
-char *prom_getproperty(char *prop, int *lenp) { return 0; /* NULL */ }
-int prom_getbool(char *prop) { return 0; }
-int prom_pci2node(int bus, int devfn) { return 0; }
-#endif /* __sparc__ */
diff --git a/perl-install/c/silo.c b/perl-install/c/silo.c
deleted file mode 100644
index 2fd621f4e..000000000
--- a/perl-install/c/silo.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/* silo.c: Conversions between SCSI and IDE disk names
- *	   and OpenPROM fully qualified paths.
- *
- * Modified for DrakX light integration.
- * Copyright (C) 1999, 2000 Jakub Jelinek <jakub@redhat.com>
- * 
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __sparc__
-
-#define _GNU_SOURCE
-#include <fcntl.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-#include <ctype.h>
-#include <dirent.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-
-#ifndef OPROMSETCUR
-#define OPROMSETCUR	0x20004FF0
-#define OPROMPCI2NODE	0x20004FF1
-#define OPROMPATH2NODE	0x20004FF2
-#endif
-
-static int hasaliases;
-static char *promdev = "/dev/openprom";
-static int promfd;
-static char sd_targets[10] = "31204567";
-static int p1275 = 0;
-static int prom_root_node, prom_current_node;
-static int promvers;
-static void (*prom_walk_callback)(int node);
-static char prom_path[1024];
-#define MAX_PROP	128
-#define MAX_VAL		(4096-128-4)
-static char buf[4096];
-static char regstr[40];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-static int
-prom_setcur(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMSETCUR, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_getsibling(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMNEXT, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_getchild(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (!node || node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMCHILD, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static char *
-prom_getproperty(char *prop, int *lenp) {
-    DECL_OP(MAX_VAL);
-    
-    strcpy (op->oprom_array, prop);
-    if (ioctl (promfd, OPROMGETPROP, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-static char *
-prom_getopt(char *var, int *lenp) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    if (ioctl (promfd, OPROMGETOPT, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-static void
-prom_setopt(char *var, char *value) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    strcpy (op->oprom_array + strlen (var) + 1, value);
-    ioctl (promfd, OPROMSETOPT, op);
-}
-
-static int
-prom_getbool(char *prop) {
-    DECL_OP(0);
-
-    *(int *)op->oprom_array = 0;
-    for (;;) {
-        op->oprom_size = MAX_PROP;
-            if (ioctl(promfd, OPROMNXTPROP, op) < 0)
-                return 0;
-            if (!op->oprom_size)
-                return 0;
-            if (!strcmp (op->oprom_array, prop))
-                return 1;
-    }
-}
-
-static int
-prom_pci2node(int bus, int devfn) {
-    DECL_OP(2*sizeof(int));
-    
-    ((int *)op->oprom_array)[0] = bus;
-    ((int *)op->oprom_array)[1] = devfn;
-    if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_path2node(char *path) {
-    DECL_OP(MAX_VAL);
-    
-    strcpy (op->oprom_array, path);
-    if (ioctl (promfd, OPROMPATH2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-#define PW_TYPE_SBUS	1
-#define PW_TYPE_PCI	2
-#define PW_TYPE_EBUS	3
-
-static void
-prom_walk(char *path, int parent, int node, int type) {
-    int nextnode;
-    int len, ntype = type;
-    char *prop;
-    
-    prop = prom_getproperty("name", &len);
-    if (prop && len > 0) {
-        if ((!strcmp(prop, "sbus") || !strcmp(prop, "sbi")) && !type)
-            ntype = PW_TYPE_SBUS;
-        else if (!strcmp(prop, "ebus") && type == PW_TYPE_PCI)
-            ntype = PW_TYPE_EBUS;
-        else if (!strcmp(prop, "pci") && !type)
-            ntype = PW_TYPE_PCI;
-    }
-    *path = '/';
-    strcpy (path + 1, prop);
-    prop = prom_getproperty("reg", &len);
-    if (prop && len >= 4) {
-        unsigned int *reg = (unsigned int *)prop;
-        int cnt = 0;
-        if (!p1275 || (type == PW_TYPE_SBUS))
-	    sprintf (regstr, "@%x,%x", reg[0], reg[1]);
-        else if (type == PW_TYPE_PCI) {
-	    if ((reg[0] >> 8) & 7)
-		sprintf (regstr, "@%x,%x", (reg[0] >> 11) & 0x1f, (reg[0] >> 8) & 7);
-	    else
-		sprintf (regstr, "@%x", (reg[0] >> 11) & 0x1f);
-        } else if (len == 4)
-	    sprintf (regstr, "@%x", reg[0]);
-        else {
-	    unsigned int regs[2];
-
-	    /* Things get more complicated on UPA. If upa-portid exists,
-	       then address is @upa-portid,second-int-in-reg, otherwise
-	       it is @first-int-in-reg/16,second-int-in-reg (well, probably
-	       upa-portid always exists, but just to be safe). */
-	    memcpy (regs, reg, sizeof(regs));
-	    prop = prom_getproperty("upa-portid", &len);
-	    if (prop && len == 4) {
-		reg = (unsigned int *)prop;
-		sprintf (regstr, "@%x,%x", reg[0], regs[1]); 
-	    } else
-	        sprintf (regstr, "@%x,%x", regs[0] >> 4, regs[1]);
-	}
-        for (nextnode = prom_getchild(parent); nextnode; nextnode = prom_getsibling(nextnode)) {
-	    prop = prom_getproperty("name", &len);
-	    if (prop && len > 0 && !strcmp (path + 1, prop))
-		cnt++;
-	}
-        if (cnt > 1)
-	    strcat (path, regstr);
-    }
-
-    prom_walk_callback(node);
-
-    nextnode = prom_getchild(node);
-    if (nextnode)
-        prom_walk(strchr (path, 0), node, nextnode, ntype);
-    nextnode = prom_getsibling(node);
-    if (nextnode)
-        prom_walk(path, parent, nextnode, type);
-}
-
-static int
-prom_init(int mode) {    
-    struct utsname u;
-
-    promfd = open(promdev, mode);
-    if (promfd == -1)
-	return -1;
-    prom_root_node = prom_getsibling(0);
-    if (!prom_root_node)
-	return -1;
-
-    if (!uname (&u) && !strcmp (u.machine, "sparc64"))
-	p1275 = 1;
-    return 0;
-}
-
-#define SDSK_TYPE_IDE	1
-#define SDSK_TYPE_SD	2
-#define SDSK_TYPE_PLN	3
-#define SDSK_TYPE_FC	4
-
-static struct sdsk_disk {
-    unsigned int prom_node;
-    unsigned int type, host, hi, mid, lo;
-    unsigned char *prom_name;
-} *hd = NULL, *sd = NULL;
-static int hdlen, sdlen;
-
-static void
-scan_walk_callback(int node) {
-    int nextnode;
-    char *prop;
-    int len, disk;
-    static int v0ctrl = 0;
-
-    for (disk = 0; disk < hdlen + sdlen; disk++) {
-	if (hd[disk].prom_node == node) {
-	    switch (hd[disk].type) {
-	    case SDSK_TYPE_IDE:
-		for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0 && (!strcmp (prop, "ata") || !strcmp (prop, "disk")))
-			break;
-		}
-		if (!nextnode)
-		    continue;
-		if (prop[0] == 'a')
-		    sprintf (prop, "/ata@%x,0/cmdk@%x,0", hd[disk].hi, hd[disk].lo);
-		else
-		    sprintf (prop, "/disk@%x,0", hd[disk].hi * 2 + hd[disk].lo);
-		break;
-	    case SDSK_TYPE_SD:
-		for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
-		    prop = prom_getproperty("compatible", &len);
-		    if (prop && len > 0 && !strcmp (prop, "sd"))
-			break;
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0 && (!strcmp (prop, "sd") || !strcmp (prop, "disk")))
-			break;
-		}
-		if (!nextnode || hd[disk].hi)
-		    continue;
-		if (promvers) {
-		    char name[1024];
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0)
-			strcpy (name, prop);
-		    else
-			strcpy (name, "sd");
-		    if (!prop)
-			prop = ((struct openpromio *)buf)->oprom_array;
-		    sprintf (prop, "/%s@%x,%x", name, hd[disk].mid, hd[disk].lo);
-		} else {
-		    int i;
-		    for (i = 0; sd_targets[i]; i++)
-			if (sd_targets[i] == '0' + hd[disk].mid)
-			    break;
-		    if (!sd_targets[i])
-			i = hd[disk].mid;
-		    sprintf (prop, "sd(%d,%d,", v0ctrl, i);
-		}
-		break;
-	    case SDSK_TYPE_PLN:
-		prop = ((struct openpromio *)buf)->oprom_array;
-		sprintf (prop, "/SUNW,pln@%x,%x/SUNW,ssd@%x,%x",
-			 hd[disk].lo & 0xf0000000, hd[disk].lo & 0xffffff,
-			 hd[disk].hi, hd[disk].mid);
-		break;
-	    case SDSK_TYPE_FC:
-		prop = ((struct openpromio *)buf)->oprom_array;
-		sprintf (prop, "/sf@0,0/ssd@w%08x%08x,%x", hd[disk].hi, hd[disk].mid, hd[disk].lo);
-		break;
-	    default:
-		continue;
-	    }
-	    hd[disk].prom_name = malloc (strlen (prom_path) + strlen(prop) + 3);
-	    if (!hd[disk].prom_name)
-		continue;
-	    if (promvers)
-		strcpy (hd[disk].prom_name, prom_path);
-	    else
-		hd[disk].prom_name[0] = '\0';
-	    strcat (hd[disk].prom_name, prop);
-	}
-    }
-    v0ctrl++;
-}
-
-static int
-scan_ide(void) {
-    DIR * dir;
-    char path[80];
-    char buffer[512];
-    int fd, i, disk;
-    struct dirent * ent;
-    int pci_bus, pci_devfn;
-
-    if (access("/proc/ide", R_OK)) return 0;
-
-    if (!(dir = opendir("/proc/ide"))) {
-	return 1;
-    }
-
-    while ((ent = readdir(dir))) {
-	if (ent->d_name[0] == 'h' && ent->d_name[1] == 'd' &&
-	    ent->d_name[2] >= 'a' && ent->d_name[2] <= 'z' &&
-	    ent->d_name[3] == '\0') {
-	    disk = ent->d_name[2] - 'a';
-	    if (disk >= hdlen) {
-		hd = (struct sdsk_disk *)realloc(hd, ((disk&~3)+4)*sizeof(struct sdsk_disk));
-		memset (hd + hdlen, 0, ((disk&~3)+4-hdlen)*sizeof(struct sdsk_disk));
-		hdlen = (disk&~3)+4;
-	    }
-	    for (i = (disk & ~3); i <= (disk | 3); i++) {
-		if (hd[i].type)
-		    break;
-	    }
-	    if (i > (disk | 3)) {
-		sprintf(path, "/proc/ide/%s", ent->d_name);
-		if (readlink(path, buffer, 512) < 5)
-		    continue;
-		if (strncmp(buffer, "ide", 3) ||
-		    !isdigit(buffer[3]) ||
-		    buffer[4] != '/')
-		    continue;
-		buffer[4] = 0;
-		sprintf(path, "/proc/ide/%s/config", buffer);
-		if ((fd = open(path, O_RDONLY)) < 0)
-		    continue;
-		i = read(fd, buffer, 50);
-		close(fd);
-		if (i < 50) continue;
-		if (sscanf (buffer, "pci bus %x device %x ",
-			    &pci_bus, &pci_devfn) != 2)
-			continue;
-		hd[disk].prom_node = prom_pci2node (pci_bus, pci_devfn);
-	    } else
-	    	hd[disk].prom_node = hd[i].prom_node;
-	    hd[disk].type = SDSK_TYPE_IDE;
-	    hd[disk].hi = (disk & 2) >> 1;
-	    hd[disk].lo = (disk & 1);
-	}
-    }
-
-    closedir(dir);
-
-    return 0;
-}
-
-static int
-scan_scsi(void) {
-    FILE *f;
-    DIR * dir, *dirhba;
-    struct dirent * ent, *enthba;
-    struct stat st;
-    char * p, * q;
-    char buf[512];
-    char path[128];
-    int disk = 0;
-    int host, channel, id, lun;
-    int prom_node, pci_bus, pci_devfn;
-
-    if (access("/proc/scsi/scsi", R_OK)) {
-	return 0;
-    }
-
-    f = fopen("/proc/scsi/scsi", "r");
-    if (f == NULL) return 1;
-
-    if (fgets(buf, sizeof(buf), f) == NULL) {
-	fclose(f);
-	return 1;
-    }
-    if (!strcmp(buf, "Attached devices: none\n")) {
-	fclose(f);
-	return 0;
-    }
-
-    while (fgets(buf, sizeof(buf), f) != NULL) {
-	if (sscanf(buf, "Host: scsi%d Channel: %d Id: %d Lun: %d\n",
-		   &host, &channel, &id, &lun) != 4)
-	    break;
-	if (fgets(buf, sizeof(buf), f) == NULL)
-	    break;
-	if (strncmp(buf, "  Vendor:", 9))
-	    break;
-	if (fgets(buf, sizeof(buf), f) == NULL)
-	    break;
-	if (strncmp(buf, "  Type:   ", 10))
-	    break;
-	if (!strncmp(buf+10, "Direct-Access", 13)) {
-	    if (disk >= sdlen) {
-		hd = (struct sdsk_disk *)
-		     realloc(hd, (hdlen+(disk&~3)+4)*sizeof(struct sdsk_disk));
-		sd = hd + hdlen;
-		memset (sd + sdlen, 0,
-			((disk&~3)+4-sdlen)*sizeof(struct sdsk_disk));
-		sdlen = (disk&~3)+4;
-	    }
-	    sd[disk].type = SDSK_TYPE_SD;
-	    sd[disk].host = host;
-	    sd[disk].hi = channel;
-	    sd[disk].mid = id;
-	    sd[disk].lo = lun;
-	    disk++;
-	}
-    }
-    fclose (f);
-
-    if (!(dir = opendir("/proc/scsi"))) {
-	if (!hdlen && hd) {
-	    free(hd);
-	    hd = NULL;
-	}
-	sd = NULL;
-	sdlen = 0;
-	return 1;
-    }
-
-    while ((ent = readdir(dir))) {
-	if (!strcmp (ent->d_name, "scsi") || ent->d_name[0] == '.')
-	    continue;
-	sprintf (path, "/proc/scsi/%s", ent->d_name);
-	if (stat (path, &st) < 0 || !S_ISDIR (st.st_mode))
-	    continue;
-	if (!(dirhba = opendir(path)))
-	    continue;
-
-	while ((enthba = readdir(dirhba))) {
-	    if (enthba->d_name[0] == '.')
-		continue;
-	    host = atoi(enthba->d_name);
-	    sprintf (path, "/proc/scsi/%s/%s", ent->d_name, enthba->d_name);
-	    f = fopen (path, "r");
-	    if (f == NULL) continue;
-
-	    if (!strcmp (ent->d_name, "esp") ||
-		!strcmp (ent->d_name, "qlogicpti") ||
-		!strcmp (ent->d_name, "fcal"))
-		p = "PROM node";
-	    else if (!strcmp (ent->d_name, "pluto"))
-		p = "serial ";
-	    else
-		p = "PCI bus";
-	    while (fgets (buf, sizeof(buf), f) != NULL) {
-		q = strstr (buf, p);
-		if (q == NULL) continue;
-		prom_node = 0;
-		switch (p[1]) {
-		case 'R':
-		    if (sscanf (q, "PROM node %x", &prom_node) == 1)
-			q = NULL;
-		    break;
-		case 'e':
-		    if (sscanf (q, "serial 000000%x %*dx%*d on soc%*d port %x PROM node %x",
-				&id, &lun, &prom_node) == 3 &&
-			lun >= 10 && lun <= 11) {
-			q = NULL;
-		    }
-		    break;
-		case 'C':
-		    if (sscanf (q, "PCI bus %x device %x", &pci_bus, &pci_devfn) == 2) {
-			q = NULL;
-			prom_node = prom_pci2node (pci_bus, pci_devfn);
-		    }
-		    break;
-		}
-		if (q == NULL) {
-		    for (disk = 0; disk < sdlen; disk++)
-			if (sd[disk].host == host && sd[disk].type) {
-			    sd[disk].prom_node = prom_node;
-			    if (p[1] == 'e') {
-				sd[disk].type = SDSK_TYPE_PLN;
-				sd[disk].lo = (lun << 28) | id;
-			    } else if (!strcmp (ent->d_name, "fcal"))
-				sd[disk].type = SDSK_TYPE_FC;
-			}
-		}
-	    }
-	    if (!strcmp (ent->d_name, "fcal")) {
-		while (fgets (buf, sizeof(buf), f) != NULL) {
-		    unsigned long long ll;
-		    if (sscanf (buf, " [AL-PA: %*x, Id: %d, Port WWN: %Lx, Node WWN: ", &id, &ll) == 2) {
-			for (disk = 0; disk < sdlen; disk++)
-			if (sd[disk].host == host && sd[disk].mid == id) {
-			    sd[disk].hi = ll >> 32;
-			    sd[disk].mid = ll;
-			}
-		    }
-		}
-	    }
-	    fclose(f);
-	}
-	closedir(dirhba);
-    }
-    closedir(dir);
-    return 0;
-}
-
-static int get_prom_ver(void)
-{
-    FILE *f = fopen ("/proc/cpuinfo","r");
-    int ver = 0;
-    char buffer[1024];
-    char *p;
-                    
-    if (f) {
-	while (fgets (buffer, 1024, f)) {
-	    if (!strncmp (buffer, "promlib", 7)) {
-		p = strstr (buffer, "Version ");
-		if (p) {
-		    p += 8;
-		    if (*p == '0' || (*p >= '2' && *p <= '3')) {
-			ver = *p - '0';
-		    }
-		}
-		break;
-	    }
-	}
-	fclose(f);
-    }
-    if (!ver) {
-	int len;
-        p = prom_getopt("sd-targets", &len);
-        if (p && len > 0 && len <= 8)
-	    strcpy(sd_targets, p);
-    }
-    return ver;
-}
-
-static void check_aliases(void) {
-    int nextnode, len;
-    char *prop;
-    hasaliases = 0;
-    for (nextnode = prom_getchild(prom_root_node); nextnode; nextnode = prom_getsibling(nextnode)) {
-	prop = prom_getproperty("name", &len);
-	if (prop && len > 0 && !strcmp (prop, "aliases"))
-	    hasaliases = 1;
-    }
-}
-
-char *prom_root_name = NULL;
-
-static void get_root_name(void) {
-    int len;
-    char *prop;
-    
-    prom_getsibling(0);
-    prop = prom_getproperty("name", &len);
-    if (prop && len > 0)
-	prom_root_name = strdup(prop);
-}
-
-int init_sbusdisk(void) {
-    if (prom_init(O_RDONLY))
-	return -1;
-    promvers = get_prom_ver();
-    check_aliases();
-    get_root_name();
-    scan_ide();
-    scan_scsi();
-    prom_walk_callback = scan_walk_callback;
-    prom_walk(prom_path, prom_root_node, prom_getchild (prom_root_node), 0);
-    close(promfd);
-    return 0;
-}
-
-void set_prom_vars(char *linuxAlias, char *bootDevice) {
-    int len;
-    int aliasDone = 0;
-    if (prom_init(O_RDWR))
-	return;
-    if (linuxAlias && hasaliases) {
-	char *use_nvramrc;
-	char nvramrc[2048];
-	char *p, *q, *r, *s;
-	int enabled = -1;
-	int count;
-
-	use_nvramrc = prom_getopt ("use-nvramrc?", &len);
-	if (len > 0) {
-	    if (!strcasecmp (use_nvramrc, "false"))
-		enabled = 0;
-	    else if (!strcasecmp (use_nvramrc, "true"))
-		enabled = 1;
-	}
-	if (enabled != -1) {
-	    p = prom_getopt ("nvramrc", &len);
-	    if (p) {
-		memcpy (nvramrc, p, len);
-		nvramrc [len] = 0;
-		q = nvramrc;
-		for (;;) {
-		    /* If there is already `devalias linux /some/ugly/prom/path'
-		       make sure we fully understand that and remove it. */
-		    if (!strncmp (q, "devalias", 8) && (q[8] == ' ' || q[8] == '\t')) {
-			for (r = q + 9; *r == ' ' || *r == '\t'; r++);
-			if (!strncmp (r, "linux", 5)) {
-			    for (s = r + 5; *s && *s != ' ' && *s != '\t'; s++);
-			    if (!*s) break;
-			    if (s == r + 5 ||
-				(r[5] == '#' && r[6] >= '0' && r[6] <= '9' &&
-				 (s == r + 7 ||
-				  (r[7] >= '0' && r[7] <= '9' && s == r + 8)))) {
-				for (r = s + 1; *r == ' ' || *r == '\t'; r++);
-				for (; *r && *r != ' ' && *r != '\t' && *r != '\n'; r++);
-				for (; *r == ' ' || *r == '\t'; r++);
-				if (*r == '\n') {
-				    r++;
-				    memmove (q, r, strlen(r) + 1);
-				    continue;
-				}
-			    }
-			}
-		    }
-		    q = strchr (q, '\n');
-		    if (!q) break;
-		    q++;
-		}
-		len = strlen (nvramrc);
-		if (len && nvramrc [len-1] != '\n')
-		    nvramrc [len++] = '\n';
-		p = nvramrc + len;
-		p = stpcpy (p, "devalias linux ");
-		r = linuxAlias;
-		q = strchr (r, ';');
-		count = 1;
-		while (q) {
-		    memcpy (p, r, q - r);
-		    p += q - r;
-		    sprintf (p, "\ndevalias linux#%d ", count++);
-		    p = strchr (p, 0);
-		    r = q + 1;
-		    q = strchr (r, ';');
-		}
-		p = stpcpy (p, r);
-		*p++ = '\n';
-		*p = 0;
-		prom_setopt ("nvramrc", nvramrc);
-		if (!enabled)
-		    prom_setopt ("use-nvramrc?", "true");
-		aliasDone = 1;
-	    }
-	}
-    }
-    if (bootDevice) {
-	char *p;
-	if (aliasDone)
-	    bootDevice = "linux";
-	p = prom_getopt ("boot-device", &len);
-	if (p) {
-	    prom_setopt ("boot-device", bootDevice);
-	    prom_setopt ("boot-file", "");
-	} else {
-	    p = prom_getopt ("boot-from", &len);
-	    if (p)
-		prom_setopt ("boot-from", bootDevice);
-	}
-    }
-    close(promfd);
-}
-
-#ifdef STANDALONE_SILO
-
-int main(void) {
-    int i;
-
-    init_sbusdisk();
-    set_prom_vars ("/sbus@1f,0/espdma/esp/sd@1,0:c;/sbus@1f,0/espdma/esp/sd@1,0:g;/sbus@1f,0/espdma/esp/sd@1,0:h", "linux");
-    printf ("prom root name `%s'\n", prom_root_name);
-    for (i = 0; i < hdlen; i++) {
-	if (hd[i].type)
-		printf ("hd%c %x %d %d %d\n", i + 'a', hd[i].prom_node,
-						    hd[i].hi, hd[i].mid, hd[i].lo);
-	if (hd[i].prom_name) printf ("%s\n", hd[i].prom_name);
-    }
-    for (i = 0; i < sdlen; i++) {
-	if (sd[i].type) {
-	    if (i < 26)
-		printf ("sd%c %x %d %d %d\n", i + 'a', sd[i].prom_node,
-						    sd[i].hi, sd[i].mid, sd[i].lo);
-	    else
-		printf ("sd%c%c %x %d %d %d\n", (i / 26) + 'a' - 1, (i % 26) + 'a', sd[i].prom_node,
-						    sd[i].hi, sd[i].mid, sd[i].lo);
-	}
-	if (sd[i].prom_name) printf ("%s\n", sd[i].prom_name);
-    }
-    exit(0);
-}
-
-#else
-
-void
-initSilo ()
-{
-    return init_sbusdisk();
-}
-
-char *
-disk2PromPath (unsigned char *disk)
-{
-    static unsigned char prompath[1024];
-    int diskno = -1, part;
-
-    if (disk[0] == 'h' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
-	diskno = disk[2] - 'a';
-	disk += 3;
-    } else if (disk[0] == 's' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
-	if (disk[3] >= 'a' && disk[3] <= 'z') {
-	    diskno = (disk[2] - 'a' + 1) * 26 + (disk[3] - 'a');
-	    disk += 4;
-	} else {
-	    diskno = disk[2] - 'a';
-	    disk += 3;
-	}
-	if (diskno >= 128)
-	    diskno = -1;
-	else
-	    diskno += hdlen;
-    }
-    if (diskno == -1)
-	part = -1;
-    else if (!disk[0])
-	part = 3;
-    else {
-	part = atoi (disk);
-	if (part <= 0 || part > 8) part = -1;
-    }
-    if (diskno < 0 || part == -1 ||
-	diskno >= hdlen + sdlen || !hd[diskno].prom_name) {
-	return NULL;
-    }
-    if (!promvers)
-	sprintf (prompath, "%s%d)", hd[diskno].prom_name, part ? part - 1 : 2);
-    else {
-	if (part)
-	    sprintf (prompath, "%s:%c", hd[diskno].prom_name, part + 'a' - 1);
-	else
-	    strcpy (prompath, hd[diskno].prom_name);
-    }
-    return prompath;
-}
-
-int
-hasAliases (void)
-{
-    return hasaliases;
-}
-
-char *
-promRootName (void)
-{
-    return prom_root_name ? prom_root_name : "";
-}
-
-void
-setPromVars (char *linuxAlias, char *bootDevice)
-{
-    if (linuxAlias && !*linuxAlias) linuxAlias = NULL;
-    if (bootDevice && !*bootDevice) bootDevice = NULL;
-    set_prom_vars (linuxAlias, bootDevice);
-}
-
-#endif
-
-#else
-void initSilo() {}
-char *disk2PromPath(unsigned char *disk) { return 0; /* NULL */ }
-int hasAliases(void) { return 0; }
-char *promRootName(void) { return 0; /* NULL */ }
-void setPromVars(char *linuxAlias, char *bootDevice) {}
-#endif /* __sparc__ */
diff --git a/perl-install/c/smp-test.c b/perl-install/c/smp-test.c
deleted file mode 100644
index f644449b8..000000000
--- a/perl-install/c/smp-test.c
+++ /dev/null
@@ -1,6 +0,0 @@
-main() {
-  if (detectSMP())
-    printf("has smp\n");
-  else
-    printf("no smp\n");
-}
diff --git a/perl-install/c/smp.c b/perl-install/c/smp.c
deleted file mode 100644
index baf786cc6..000000000
--- a/perl-install/c/smp.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
-[_Anarchy_(alan@lightning.swansea.uk.linux.org)] you should do one check
-   though - if the board seems to be SMP and the CPU in /proc/cpuinfo is non
-   intel dont install an SMP kernel - thats a dual pentium board with a cyrix
-   or similar single cpu in it
-*/
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <string.h>
-#include <errno.h>
-
-#ifdef __alpha__
-int alphaDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-	char buff[1024];
-	
-	while (fgets (buff, 1024, f) != NULL) {
-	    if (!strncmp (buff, "cpus detected\t\t: ", 17)) {
-		if (strtoul (buff + 17, NULL, 0) > 1)
-		    issmp = 1;
-		break;
-	    }
-	}
-	fclose(f);
-    } else
-	return -1;
-    
-    return issmp;
-}
-#endif /* __alpha__ */
-
-#ifdef __sparc__
-int sparcDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-	char buff[1024];
-	
-	while (fgets (buff, 1024, f) != NULL) {
-	    if (!strncmp (buff, "ncpus probed\t: ", 15)) {
-		if (strtoul (buff + 15, NULL, 0) > 1)
-		    issmp = 1;
-		break;
-	    }
-	}
-	fclose(f);
-    } else
-	return -1;
-    
-    return issmp;
-}
-#endif /* __sparc__ */
-
-/* just a placeholder for now - don't have an SMP machine
-   need something in place to build - s.benedict */
-
-#ifdef __powerpc__
-int ppcDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-        char buff[1024];
-        
-        while (fgets (buff, 1024, f) != NULL) {
-            if (!strncmp (buff, "ncpus active\t: ", 15)) {
-                if (strtoul (buff + 15, NULL, 0) > 1)
-                    issmp = 1;
-                break;
-            }
-        }
-        fclose(f);
-    } else
-        return -1;
-    
-    return issmp;
-}
-#endif /* __powerpc__ */
-
-#ifdef __i386__
-/*
- * Copyright (c) 1996, by Steve Passe
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. The name of the developer may NOT be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      $Id$
- */
-
-/*
- * mptable.c
- */
-
-#define VMAJOR                  2
-#define VMINOR                  0
-#define VDELTA                  12
-
-/*
- * this will cause the raw mp table to be dumped to /tmp/mpdump
- *
-#define RAW_DUMP
- */
-
-#define MP_SIG                  0x5f504d5f      /* _MP_ */
-#define EXTENDED_PROCESSING_READY
-#define OEM_PROCESSING_READY_NOT
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-
-#define LINUX 1
-#if LINUX
-typedef unsigned int vm_offset_t;
-#else
-#include <machine/types.h>
-#endif
-
-/* EBDA is @ 40:0e in real-mode terms */
-#define EBDA_POINTER            0x040e          /* location of EBDA pointer */
-
-/* CMOS 'top of mem' is @ 40:13 in real-mode terms */
-#define TOPOFMEM_POINTER        0x0413          /* BIOS: base memory size */
-
-#define DEFAULT_TOPOFMEM        0xa0000
-
-#define BIOS_BASE               0xf0000
-#define BIOS_BASE2              0xe0000
-#define BIOS_SIZE               0x10000
-#define ONE_KBYTE               1024
-
-#define GROPE_AREA1             0x80000
-#define GROPE_AREA2             0x90000
-#define GROPE_SIZE              0x10000
-
-/* MP Floating Pointer Structure */
-typedef struct MPFPS {
-    char        signature[ 4 ];
-    void*       pap;
-    u_char      length;
-    u_char      spec_rev;
-    u_char      checksum;
-    u_char      mpfb1;
-    u_char      mpfb2;
-    u_char      mpfb3;
-    u_char      mpfb4;
-    u_char      mpfb5;
-} mpfps_t;
-
-/* MP Configuration Table Header */
-typedef struct MPCTH {
-    char        signature[ 4 ];
-    u_short     base_table_length;
-    u_char      spec_rev;
-    u_char      checksum;
-    u_char      oem_id[ 8 ];
-    u_char      product_id[ 12 ];
-    void*       oem_table_pointer;
-    u_short     oem_table_size;
-    u_short     entry_count;
-    void*       apic_address;
-    u_short     extended_table_length;
-    u_char      extended_table_checksum;
-    u_char      reserved;
-} mpcth_t;
-
-typedef struct PROCENTRY {
-    u_char      type;
-    u_char      apicID;
-    u_char      apicVersion;
-    u_char      cpuFlags;
-    u_long      cpuSignature;
-    u_long      featureFlags;
-    u_long      reserved1;
-    u_long      reserved2;
-} ProcEntry;
-
-#define PROCENTRY_FLAG_EN       0x01
-
-static void seekEntry( vm_offset_t addr );
-static void apic_probe( vm_offset_t* paddr, int* where );
-static void readEntry( void* entry, int size );
-
-/* global data */
-static int     pfd;            /* physical /dev/mem fd */
-static int     verbose = 0;
-static int     grope = 0;
-
-static int
-readType()
-{
-    u_char      type;
-
-    if ( read( pfd, &type, sizeof( u_char ) ) != sizeof( u_char ) ) {
-        perror( "type read" );
-        fprintf( stderr, "\npfd: %d", pfd );
-        fflush( stderr );
-        exit( 1 );
-    }
-
-    if ( lseek( pfd, -1, SEEK_CUR ) < 0 ) {
-        perror( "type seek" );
-        exit( 1 );
-    }
-
-    return (int)type;
-}
-
-static int intelDetectSMP(void)
-{
-    vm_offset_t paddr;
-    int         where;
-    mpfps_t     mpfps;
-    int		rc = 0;
-    int		ncpus = 0;
-    
-    /* open physical memory for access to MP structures */
-    if ( (pfd = open( "/dev/mem", O_RDONLY )) < 0 ) {
-	return 0;
-    }
-
-    /* probe for MP structures */
-    apic_probe( &paddr, &where );
-    if ( where <= 0 )
-	return 0;
-
-    seekEntry( paddr );
-    readEntry( &mpfps, sizeof( mpfps_t ) );
-
-    if (mpfps.mpfb1)
-	/* old style */
-	rc = 1;
-    else {
-	/* go to the config table */
-	mpcth_t     cth;
-	int count, i;
-	    
-	paddr = (vm_offset_t) mpfps.pap;
-	seekEntry( paddr );
-	readEntry( &cth, sizeof( cth ) );
-	/* if we don't have any entries, the kernel sure
-	   won't be able to set up mp.  Needs at least one entry
-	   for smp kernel */
-	if (cth.entry_count <= 1) {
-	    close (pfd);
-	    return 0;
-	}
-	count = cth.entry_count;
-	for (i = 0; i < count; i++) {
-	    if ( readType() == 0 ) {
-		ProcEntry   entry;
-		readEntry( &entry, sizeof( entry ) );
-		if (entry.cpuFlags & PROCENTRY_FLAG_EN)
-		    ncpus++;
-	    }
-	}
-	if (ncpus > 1)
-	    rc = 1;
-    }
-
-    close (pfd);
-    return rc;
-}
-
-/*
- * set PHYSICAL address of MP floating pointer structure
- */
-#define NEXT(X)         ((X) += 4)
-static void
-apic_probe( vm_offset_t* paddr, int* where )
-{
-    /*
-     * c rewrite of apic_probe() by Jack F. Vogel
-     */
-
-    int         x;
-    u_short     segment;
-    vm_offset_t target;
-    u_int       buffer[ BIOS_SIZE / sizeof( int ) ];
-
-    if ( verbose )
-        printf( "\n" );
-
-    /* search Extended Bios Data Area, if present */
-    if ( verbose )
-        printf( " looking for EBDA pointer @ 0x%04x, ", EBDA_POINTER );
-    seekEntry( (vm_offset_t)EBDA_POINTER );
-    readEntry( &segment, 2 );
-    if ( segment ) {                /* search EBDA */
-        target = (vm_offset_t)segment << 4;
-        if ( verbose )
-            printf( "found, searching EBDA @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, ONE_KBYTE );
-
-        for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 1;
-                *paddr = (x * sizeof( unsigned int )) + target;
-                return;
-            }
-        }
-    }
-    else {
-        if ( verbose )
-            printf( "NOT found\n" );
-    }
-
-    /* read CMOS for real top of mem */
-    seekEntry( (vm_offset_t)TOPOFMEM_POINTER );
-    readEntry( &segment, 2 );
-    --segment;                                          /* less ONE_KBYTE */
-    target = segment * 1024;
-    if ( verbose )
-        printf( " searching CMOS 'top of mem' @ 0x%08x (%dK)\n",
-                target, segment );
-    seekEntry( target );
-    readEntry( buffer, ONE_KBYTE );
-
-    for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 2;
-            *paddr = (x * sizeof( unsigned int )) + target;
-            return;
-        }
-    }
-
-    /* we don't necessarily believe CMOS, check base of the last 1K of 640K */
-    if ( target != (DEFAULT_TOPOFMEM - 1024)) {
-        target = (DEFAULT_TOPOFMEM - 1024);
-        if ( verbose )
-            printf( " searching default 'top of mem' @ 0x%08x (%dK)\n",
-                    target, (target / 1024) );
-        seekEntry( target );
-        readEntry( buffer, ONE_KBYTE );
-
-        for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 3;
-                *paddr = (x * sizeof( unsigned int )) + target;
-                return;
-            }
-        }
-    }
-
-    /* search the BIOS */
-    if ( verbose )
-        printf( " searching BIOS @ 0x%08x\n", BIOS_BASE );
-    seekEntry( BIOS_BASE );
-    readEntry( buffer, BIOS_SIZE );
-
-    for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 4;
-            *paddr = (x * sizeof( unsigned int )) + BIOS_BASE;
-            return;
-        }
-    }
-
-    /* search the extended BIOS */
-    if ( verbose )
-        printf( " searching extended BIOS @ 0x%08x\n", BIOS_BASE2 );
-    seekEntry( BIOS_BASE2 );
-    readEntry( buffer, BIOS_SIZE );
-
-    for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 5;
-            *paddr = (x * sizeof( unsigned int )) + BIOS_BASE2;
-            return;
-        }
-    }
-
-    if ( grope ) {
-        /* search additional memory */
-        target = GROPE_AREA1;
-        if ( verbose )
-            printf( " groping memory @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, GROPE_SIZE );
-
-        for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 6;
-                *paddr = (x * sizeof( unsigned int )) + GROPE_AREA1;
-                return;
-            }
-        }
-
-        target = GROPE_AREA2;
-        if ( verbose )
-            printf( " groping memory @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, GROPE_SIZE );
-
-        for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 7;
-                *paddr = (x * sizeof( unsigned int )) + GROPE_AREA2;
-                return;
-            }
-        }
-    }
-
-    *where = 0;
-    *paddr = (vm_offset_t)0;
-}
-
-
-/*
- *
- */
-static void
-seekEntry( vm_offset_t addr )
-{
-    if ( lseek( pfd, (off_t)addr, SEEK_SET ) < 0 ) {
-        return;
-        perror( "/dev/mem seek" );
-        exit( 1 );
-    }
-}
-
-
-/*
- *
- */
-static void
-readEntry( void* entry, int size )
-{
-    if ( read( pfd, entry, size ) != size ) {
-        return;
-        perror( "readEntry" );
-        exit( 1 );
-    }
-}
-
-
-#endif /* __i386__ */
-
-int detectSMP(void)
-{
-    static int isSMP = -1;
-
-    if (isSMP != -1)
-	return isSMP;
-
-#ifdef __i386__
-    return isSMP = intelDetectSMP();
-#elif __sparc__
-    return isSMP = sparcDetectSMP();
-#elif __alpha__
-    return isSMP = alphaDetectSMP();
-#elif __powerpc__
-    return isSMP = ppcDetectSMP();
-#elif __ia64__
-	/* TODO: Update to check against /proc/pal/cpuX */
-    return isSMP = 1;
-#elif __x86_64__
-	/* TODO: Update when SMP machines are there */
-	return isSMP = 0;
-#else
-    #error unknown architecture
-#endif
-}
-
-#if TEST
-int main() {
-  if (detectSMP())
-    printf("has smp\n");
-  else
-    printf("no smp\n");
-}
-#endif
diff --git a/perl-install/c/smp.h b/perl-install/c/smp.h
deleted file mode 100644
index 3255cc489..000000000
--- a/perl-install/c/smp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef SMP_H
-#define SMP_H
-
-int detectSMP(void);
-
-#endif /* SMP_H */
diff --git a/perl-install/c/stuff.pm b/perl-install/c/stuff.pm
deleted file mode 100644
index 918abee6c..000000000
--- a/perl-install/c/stuff.pm
+++ /dev/null
@@ -1,34 +0,0 @@
-package c::stuff; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-
-bootstrap c::stuff $VERSION;
-
-sub from_utf8 { iconv($_[0], "utf-8", standard_charset()) }
-sub to_utf8 { iconv($_[0], standard_charset(), "utf-8") }
-
-sub headerGetEntry {
-    my ($h, $q) = @_;
-    $h or log::l("empty header in headerGetEntry"), return;
-    $q eq 'name' and return headerGetEntry_string($h, RPMTAG_NAME());
-    $q eq 'group' and return from_utf8(headerGetEntry_string($h, RPMTAG_GROUP()));
-    $q eq 'version' and return headerGetEntry_string($h, RPMTAG_VERSION());
-    $q eq 'release' and return headerGetEntry_string($h, RPMTAG_RELEASE());
-    $q eq 'epoch' and return headerGetEntry_int($h, RPMTAG_EPOCH());
-    $q eq 'summary' and return from_utf8(headerGetEntry_string($h, RPMTAG_SUMMARY()));
-    $q eq 'description' and return from_utf8(headerGetEntry_string($h, RPMTAG_DESCRIPTION()));
-    $q eq 'arch' and return headerGetEntry_string($h, RPMTAG_ARCH());
-    $q eq 'size' and return headerGetEntry_int($h, RPMTAG_SIZE());
-    $q eq 'obsoletes' and return headerGetEntry_string_list($h, RPMTAG_OBSOLETES());
-    $q eq 'requires' and return headerGetEntry_string_list($h, RPMTAG_REQUIRENAME());
-    $q eq 'fileflags' and return headerGetEntry_int_list($h, RPMTAG_FILEFLAGS());
-    $q eq 'filenames' and return headerGetEntry_filenames($h);
-}
-
-1;
diff --git a/perl-install/class_discard.pm b/perl-install/class_discard.pm
deleted file mode 100644
index 7ecd1375b..000000000
--- a/perl-install/class_discard.pm
+++ /dev/null
@@ -1,11 +0,0 @@
-package class_discard; # $Id$
-
-use log;
-
-sub new { bless {}, "class_discard" }
-
-sub AUTOLOAD {
-    log::l("class_discard: $AUTOLOAD called at ", caller);
-}
-
-1;
diff --git a/perl-install/commands b/perl-install/commands
deleted file mode 100755
index baa02f232..000000000
--- a/perl-install/commands
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/bin/perl
-
-use diagnostics;
-use strict;
-
-use lib qw(/usr/bin/perl-install .);
-use common;
-use commands;
-
-my $progname = basename($0);
-
-# hack as some functions are defined by perl... so chmod -> chmod_
-&{$commands::{$progname} || $commands::{$progname . "_"} || \&err}(@ARGV), exit 0;
-
-sub err { die "$0: unknown program (unimplemented)\n"; }
diff --git a/perl-install/commands.pm b/perl-install/commands.pm
deleted file mode 100644
index 36b0297e5..000000000
--- a/perl-install/commands.pm
+++ /dev/null
@@ -1,587 +0,0 @@
-#-########################################################################
-#- This file implement many common shell commands:
-#- true, false, cat, which, dirname, basename, rmdir, lsmod, grep, tr,
-#- mount, umount, mkdir, mknod, ln, rm, chmod, chown, mkswap, swapon,
-#- swapoff, ls, cp, ps, dd, head, tail, strings, hexdump, more, insmod,
-#- modprobe, route, df, kill, lspci, lssbus, dmesg, sort, du, 
-#-########################################################################
-package commands; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($printable_chars);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my $BUFFER_SIZE = 1024;
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub getopts {
-    my $o = shift;
-    my @r = map { '' } (@_ = split //, $_[0]);
-    while (1) {
-	local $_ = $o->[0];
-	$_ && /^-/ or return @r;
-	for (my $i = 0; $i < @_; $i++) { /$_[$i]/ and $r[$i] = $_[$i]; }
-	shift @$o;
-    }
-    @r;
-}
-
-sub true { exit 0 }
-sub false { exit 1 }
-sub cat { @ARGV = @_; print while <> }
-sub which { ARG: foreach (@_) { foreach my $c (split /:/, $ENV{PATH}) { -x "$c/$_" and print("$c/$_\n"), next ARG; }}}
-sub dirname_ { print dirname(@_), "\n" }
-sub basename_ { print basename(@_), "\n" }
-sub rmdir_ { foreach (@_) { rmdir $_ or die "rmdir: can't remove $_\n" } }
-sub lsmod { print "Module                  Size  Used by\n"; cat("/proc/modules"); }
-
-sub grep_ {
-    my ($h, $v, $i) = getopts(\@_, qw(hvi));
-    @_ == 0 || $h and die "usage: grep <regexp> [files...]\n";
-    my $r = shift;
-    $r = qr/$r/i if $i;
-    @ARGV = @_; (/$r/ ? $v || print : $v && print) while <>;
-}
-
-sub tr_ {
-    my ($s, $c, $d) = getopts(\@_, qw(s c d));
-    @_ >= 1 + (!$d || $s) or die "usage: tr [-c] [-s [-d]] <set1> <set2> [files...]\n    or tr [-c] -d <set1> [files...]\n";
-    my $set1 = shift;
-    my $set2; !$d || $s and $set2 = shift;
-    @ARGV = @_;
-    eval "(tr/$set1/$set2/$s$d$c, print) while <>";
-}
-
-sub mount {
-    @_ or return cat("/proc/mounts");
-    my ($t, $r) = getopts(\@_, qw(tr));
-    my $fs = $t && shift;
-
-    @_ == 2 or die "usage: mount [-r] [-t <fs>] <device> <dir>\n",
-    "       (use -r for readonly)\n",
-    "       (if /dev/ is left off the device name, a temporary node will be created)\n";
-
-    my ($dev, $where) = @_;
-    $fs ||= $where =~ /:/ ? "nfs" :
-            $dev =~ /fd/ ? "vfat" : "ext2";
-
-    require fs;
-    require modules;
-    modules::load_dependencies("/modules/modules.dep");
-    fs::mount($dev, $where, $fs, $r);
-}
-
-sub umount {
-    @_ == 1 or die "umount expects a single argument\n";
-
-    require fs;
-    fs::umount($_[0]);
-}
-
-sub mkdir_ {
-    my ($rec) = getopts(\@_, qw(p));
-    mkdir_p($_) foreach @_;
-}
-
-
-sub mknod {
-    if (@_ == 1) {
-	require devices;
-	eval { devices::make($_[0]) }; $@ and die "mknod: failed to create $_[0]\n";
-    } elsif (@_ == 4) {
-	require c;
-	my $mode = $ {{"b" => c::S_IFBLK(), "c" => c::S_IFCHR()}}{$_[1]} or die "unknown node type $_[1]\n";
-	syscall_('mknod', my $a = $_[0], $mode | 0600, makedev($_[2], $_[3])) or die "mknod failed: $!\n";
-    } else { die "usage: mknod <path> [b|c] <major> <minor> or mknod <path>\n"; }
-}
-
-sub ln {
-    my ($force, $soft) = getopts(\@_, qw(fs));
-    @_ >= 1 or die "usage: ln [-s] [-f] <source> [<dest>]\n";
-
-    my ($source, $dest) = @_;
-    $dest ||= basename($source);
-
-    $force and unlink $dest;
-
-    ($soft ? symlink($source, $dest) : link($source, $dest)) or die "ln failed: $!\n";
-}
-
-sub rm {
-    my ($rec, undef) = getopts(\@_, qw(rf));
-
-    my $rm; $rm = sub {
-	foreach (@_) {
-	    if (!-l $_ && -d $_) {
-		$rec or die "$_ is a directory\n";
-		&$rm(glob_($_));
-		rmdir $_ or die "can't remove directory $_: $!\n";
-	    } else { unlink $_ or die "rm of $_ failed: $!\n" }
-	}
-    };
-    &$rm(@_);
-}
-
-sub chmod_ {
-    @_ >= 2 or die "usage: chmod <mode> <files>\n";
-
-    my $mode = shift;
-    $mode =~ /^[0-7]+$/ or die "illegal mode $mode\n";
-
-    foreach (@_) { chmod oct($mode), $_ or die "chmod failed $_: $!\n" }
-}
-
-sub chown_ {
-    my ($rec, undef) = getopts(\@_, qw(r));
-    local $_ = shift or die "usage: chown [-r] name[.group] <files>\n";
-
-    my ($name, $group) = (split('\.'), $_);
-
-    my ($uid, $gid) = (getpwnam($name) || $name, getgrnam($group) || $group);
-
-    my $chown; $chown = sub {
-	foreach (@_) {
-	    chown $uid, $gid, $_ or die "chown of file $_ failed: $!\n";
-	    -d $_ && $rec and &$chown(glob_($_));
-	}
-    };
-    &$chown(@_);
-}
-
-sub mkswap {
-    @_ == 1 or die "mkswap <device>\n";
-    require swap;
-    swap::enable($_[0], 0);
-}
-
-sub swapon {
-    @_ == 1 or die "swapon <file>\n";
-    require swap;
-    swap::swapon($_[0]);
-}
-sub swapoff {
-    @_ == 1 or die "swapoff <file>\n";
-    require swap;
-    swap::swapoff($_[0]);
-}
-
-sub uncpio {
-    @_ and die "uncpio reads from stdin\n";
-
-#    cpioInstallArchive(gzdopen(0, "r"), NULL, 0, NULL, NULL, &fail);
-}
-
-
-sub rights {
-    my $r = '-' x 9;
-    my @rights = (qw(x w r x w r x w r), ['t', 0], ['s', 3], ['s', 6]);
-    for (my $i = 0; $i < @rights; $i++) {
-	if (vec(pack("S", $_[0]), $i, 1)) {
-	    my ($val, $place) = $i >= 9 ? @{$rights[$i]} : ($rights[$i], $i);
-	    my $old = \substr($r, 8 - $place, 1);
-	    $$old = ($$old eq '-' && $i >= 9) ? uc $val : $val;
-	}
-    }
-    my @types = split //, "_pc_d_b_-_l_s";
-    $types[$_[0] >> 12 & 0xf] . $r;
-}
-
-sub displaySize {
-    my $m = $_[0] >> 12;
-    $m == 4 || $m == 8 || $m == 10;
-}
-
-sub ls {
-    my ($l , $h) = getopts(\@_, qw(lh));
-    $h and die "usage: ls [-l] <files...>\n";
-
-    @_ or @_ = '.';
-    @_ == 1 && -d $_[0] and @_ = glob_($_[0]);
-    foreach (sort @_) {
-	if ($l) {
-	    my @s = lstat or warn("can't stat file $_\n"), next;
-	    formline(
-"@<<<<<<<<< @<<<<<<< @<<<<<<< @>>>>>>>> @>>>>>>>>>>>>>>> @*\n",
-		     rights($s[2]), getpwuid $s[4] || $s[4], getgrgid $s[5] || $s[5],
-		     displaySize($s[2]) ? $s[7] : join(", ", unmakedev($s[6])),
-		     scalar localtime $s[9], -l $_ ? "$_ -> " . readlink $_ : $_);
-	    print $^A; $^A = '';
-	} else { print "$_\n"; }
-    }
-}
-sub cp {
-    my ($force) = getopts(\@_, qw(f));
-    @_ >= 2 or die "usage: cp [-f] <sources> <dest>\n(this cp does -Rl by default)\n";
-
-    my $cp; $cp = sub {
-	my $dest = pop @_;
-
-	@_ or return;
-	@_ == 1 || -d $dest or die "cp: copying multiple files, but last argument ($dest) is not a directory\n";
-
-	foreach my $src (@_) {
-	    my $dest = $dest;
-	    -d $dest and $dest .= "/" . basename($src);
-
-	    if (-e $dest) {
-		$force ? unlink $dest : die "file $dest already exist\n";
-	    }
-
-	    if (-d $src) {
-		-d $dest or mkdir $dest, (stat($src))[2] or die "mkdir: can't create directory $dest: $!\n";
-		&$cp(glob_($src), $dest);
-	    } elsif (-l $src) {
-		unless (symlink((readlink($src) || die "readlink failed: $!"), $dest)) {
-		    my $msg = "symlink: can't create symlink $dest: $!\n";
-		    $force ? warn $msg : die $msg;		    
-		}
-	    } else {
-		local (*F, *G);
-		open F, $src or die "can't open $src for reading: $!\n";
-		open G, "> $dest" or $force or die "can't create $dest : $!\n";
-		local $_;
-		while (<F>) { print G $_ }
-		chmod((stat($src))[2], $dest);
-	    }
-	}
-    };
-    &$cp(@_);
-}
-
-sub ps {
-    @_ and die "usage: ps\n";
-    my ($pid, $rss, $cpu, $cmd);
-    my ($uptime) = split ' ', first(cat_("/proc/uptime"));
-    my $hertz = 100;
-
-    require c;
-    my $page = c::getpagesize() / 1024;
-
-    open PS, ">&STDOUT";
-    format PS_TOP =
-  PID   RSS %CPU CMD
-.
-    format PS =
-@>>>> @>>>> @>>> @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-$pid, $rss, $cpu, $cmd
-.
-    foreach $pid (sort {$a <=> $b} grep { /\d+/ } all('/proc')) {
-	 my @l = split(' ', cat_("/proc/$pid/stat"));
-	 $cpu = sprintf "%2.1f", max(0, min(99, ($l[13] + $l[14]) * 100 / $hertz / ($uptime - $l[21] / $hertz)));
-	 $rss = (split ' ', cat_("/proc/$pid/stat"))[23] * $page;
-	 (($cmd) = cat_("/proc/$pid/cmdline")) =~ s/\0/ /g;
-	 $cmd ||= (split ' ', (cat_("/proc/$pid/stat"))[0])[1];
-	 write PS;
-    }
-}
-
-
-sub dd {
-    my $u = "usage: dd [-h] [-p] [if=<file>] [of=<file>] [bs=<number>] [count=<number>]\n";
-    my ($help, $percent) = getopts(\@_, qw(hp));
-    die $u if $help;
-    my %h = (if => *STDIN, of => *STDOUT, bs => 512, count => undef);
-    foreach (@_) {
-	/(.*?)=(.*)/ && exists $h{$1} or die $u;
-	$h{$1} = $2;
-    }
-    local (*IF, *OF); my ($tmp, $nb, $read);
-    ref $h{if} eq 'GLOB' ? *IF = $h{if} : sysopen(IF, $h{if}, 0   ) || die "error: can't open file $h{if}\n";
-    ref $h{of} eq 'GLOB' ? *OF = $h{of} : sysopen(OF, $h{of}, 0x41) || die "error: can't open file $h{of}\n";
-
-    $h{bs} = removeXiBSuffix($h{bs});
-
-    for ($nb = 0; !$h{count} || $nb < $h{count}; $nb++) {
-	printf "\r%02.1d%%", 100 * $nb / $h{count} if $h{count} && $percent;
-	$read = sysread(IF, $tmp, $h{bs}) or $h{count} ? die "error: can't read block $nb\n" : last;
-	syswrite(OF, $tmp) or die "error: can't write block $nb\n";
-	$read < $h{bs} and $read = 1, last;
-    }
-    print STDERR "\r$nb+$read records in\n";
-    print STDERR   "$nb+$read records out\n";
-}
-
-sub head_tail {
-    my ($h, $n) = getopts(\@_, qw(hn));
-    $h || @_ < to_bool($n) and die "usage: $0 [-h] [-n lines] [<file>]\n";
-    $n = $n ? shift : 10;
-    local *F; @_ ? open(F, $_[0]) || die "error: can't open file $_[0]\n" : (*F = *STDIN);
-
-    local $_;
-    if ($0 eq 'head') {
-	while (<F>) { $n-- or return; print }
-    } else {
-	@_ = (); while (<F>) { push @_, $_; @_ > $n and shift; }
-	print @_;
-    }
-}
-sub head { $0 = 'head'; &head_tail }
-sub tail { $0 = 'tail'; &head_tail }
-
-sub strings {
-    my ($h, $o, $n) = getopts(\@_, qw(hon));
-    $h and die "usage: strings [-o] [-n min-length] [<files>]\n";
-    $n = $n ? shift : 4;
-    $/ = "\0"; @ARGV = @_; my $l = 0; while (<>) {
-	while (/[$printable_chars]{$n,}/og) {
-	    printf "%07d ", ($l + length $') if $o;
-	    print "$&\n" ;
-	}
-	$l += length;
-    } continue { $l = 0 if eof }
-}
-
-sub hexdump {
-    my $i = 0; $/ = \16; @ARGV = @_; while (<>) {
-	printf "%08lX  ", $i; $i += 16;
-	print join(" ", (map { sprintf "%02X", $_ } unpack("C*", $_)),
-		   ($_ =~ s/[^$printable_chars]/./og, $_)[1]), "\n";
-    }
-}
-
-sub more {
-    @ARGV = @_;
-    require devices;
-    my $tty = devices::make('tty');
-    local *IN; open IN, "<$tty" or die "can't open $tty\n";
-    my $n = 0; while (<>) {
-	if (++$n == 25) {
-	    my $v = <IN>;
-	    $v =~ /^q/ and exit 0;
-	    $n = 0;
-	}
-	print
-    }
-}
-
-sub pack_ {
-    my $t;
-    foreach (@_) {
-	if (-d $_) {
-	    pack_(glob_($_));
-	} else {
-	    print -s $_, "\n";
-	    print $_, "\n";
-
-	    local *F;
-	    open F, $_ or die "can't read file $_: $!\n";
-	    while (read F, $t, $BUFFER_SIZE) { print $t; }
-	}
-    }
-}
-
-sub unpack_ {
-    my $t;
-    @_ == 1 or die "give me one and only one file to unpack\n";
-    local *F;
-    open F, $_[0] or die "can't open file $_: $!\n";
-    while (1) {
-	my $size = chomp_(scalar <F>);
-	defined $size or last;
-	$size =~ /^\d+$/ or die "bad format (can't find file size)\n";
-	my $filename = chomp_(scalar <F>) or die "expecting filename\n";
-
-	print "$filename\n";
-	my $dir = dirname($filename);
-	-d $dir or mkdir_p($dir);
-
-	local *G;
-	open G, "> $filename" or die "can't write file $filename: $!\n";
-	while ($size) {
-	    $size -= read(F, $t, min($size, $BUFFER_SIZE)) || die "data for file $filename is missing\n";
-	    print G $t or die "error writing to file $filename: $!\n";
-	}
-    }
-}
-
-sub insmod {
-    my ($h) = getopts(\@_, qw(h));
-    $h || @_ == 0 and die "usage: insmod <module> [options]\n";
-    my $f = local $_ = shift;
-
-    require run_program;
-
-    #- try to install the module if it exist else extract it from archive.
-    #- needed for cardmgr.
-    unless (-r $f) {
-	$_ = $1 if m@.*/([^/]*)\.o@;
-	unless (-r ($f = "/lib/modules/$_.o")) {
-	    $f = "/tmp/$_.o";
-	    my $cz = "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz"; -e $cz or $cz .= "2";
-	    if (-e $cz) {
-		eval {
-		    require packdrake;
-		    my $packer = new packdrake($cz, quiet => 1);
-		    $packer->extract_archive("/tmp", "$_.o");
-		};
-	    } elsif (-e "/lib/modules.cpio.bz2") {
-		run_program::run("cd /tmp ; $ENV{LD_LOADER} bzip2 -cd /lib/modules.cpio.bz2 | $ENV{LD_LOADER} cpio -i $_.o");
-	    } else {
-		die "unable to find an archive for modules";
-	    }
-	}
-    }
-    -r $f or die "can't find module $_";
-    run_program::run(["/usr/bin/insmod_", "insmod"], "-f", $f, @_) or die("insmod $_ failed");
-    unlink $f;
-}
-
-sub modprobe {
-    my ($h) = getopts(\@_, qw(h));
-    $h || @_ == 0 and die "usage: modprobe <module> [options]\n";
-    my $name = shift;
-    require modules;
-    modules::load_dependencies("/modules/modules.dep");
-    modules::load([ $name, @_ ]);
-}
-
-sub route {
-    @_ == 0 or die "usage: route\nsorry, no modification handled\n";
-    my ($titles, @l) = cat_("/proc/net/route");
-    my @titles = split ' ', $titles;
-    my %l;
-    open ROUTE, ">&STDOUT";
-    format ROUTE_TOP =
-Destination    Gateway        Mask           Iface
-.
-    format ROUTE =
-@<<<<<<<<<<<<  @<<<<<<<<<<<<  @<<<<<<<<<<<<  @<<<<<<<
-$l{Destination}, $l{Gateway}, $l{Mask}, $l{Iface}
-.
-    foreach (@l) {
-	/^\s*$/ and next;
-	@l{@titles} = split;
-	$_ = join ".", reverse map { hex } unpack "a2a2a2a2", $_ foreach @l{qw(Destination Gateway Mask)};
-	$l{Destination} = 'default' if $l{Destination} eq "0.0.0.0";
-	$l{Gateway}     = '*'       if $l{Gateway}     eq "0.0.0.0";
-	write ROUTE;
-    }
-}
-
-sub df {
-    my ($h) = getopts(\@_, qw(h));
-    my ($dev, $size, $free, $used, $use, $mntpoint);
-    open DF, ">&STDOUT";
-    format DF_TOP =
-Filesystem          Size      Used    Avail     Use  Mounted on
-.
-    format DF =
-@<<<<<<<<<<<<<<<< @>>>>>>> @>>>>>>> @>>>>>>> @>>>>>% @<<<<<<<<<<<<<<<<<<<<<<<<<
-$dev, $size, $used, $free, $use, $mntpoint
-.
-    my %h;
-    foreach (cat_("/proc/mounts"), cat_("/etc/mtab")) {
-	($dev, $mntpoint) = split;
-	$h{$dev} = $mntpoint;
-    }
-    foreach $dev (sort keys %h) {
-	($size, $free) = MDK::Common::System::df($mntpoint = $h{$dev});
-	$size or next;
-
-	$use = int (100 * ($size - $free) / $size);
-	$used = $size - $free;
-	if ($h) {
-	    $used = int ($used / 1024) . "M";
-	    $size = int ($size / 1024) . "M";
-	    $free = int ($free / 1024) . "M";
-	}
-	write DF if $size;
-    }
-}
-
-sub kill {
-    my $signal = 15;
-    @_ or die "usage: kill [-<signal>] pids\n";
-    $signal = (shift, $1)[1] if $_[0] =~ /^-(.*)/;
-    kill $signal, @_ or die "kill failed: $!\n";
-}
-
-sub lspci {
-    require detect_devices;
-    print join "\n", detect_devices::stringlist(1), '';
-}
-*lssbus = *lspci;
-
-sub dmesg { print cat_("/tmp/syslog"); }
-
-sub sort {
-    my ($n, $h) = getopts(\@_, qw(nh));
-    $h and die "usage: sort [-n] [<file>]\n";
-    local *F; @_ ? open(F, $_[0]) || die "error: can't open file $_[0]\n" : (*F = *STDIN);
-    if ($n) {
-	print sort { $a <=> $b } <F>;
-    } else {
-	print sort <F>;
-    }
-}
-
-sub du {
-    my ($s, $h) = getopts(\@_, qw(sh));
-    $h || !$s and die "usage: du -s [<directories>]\n";
-
-    my $f; $f = sub {
-	my ($e) = @_;
-	my $s = (lstat($e))[12];
-	$s += sum(map { &$f($_) } glob_("$e/*")) if !-l $e && -d $e;
-	$s;
-    };
-    print &$f($_) >> 1, "\t$_\n" foreach @_ ? @_ : glob_("*");
-}
-
-sub  install_cpio($$;@) {
-    my ($dir, $name, @more) = @_; 
-
-    return "$dir/$name" if -e "$dir/$name";
-
-    my $cpio = "$dir.cpio.bz2";
-    -e $cpio or return;
-
-    eval { rm("-r", $dir) };
-    mkdir $dir, 0755;
-    require run_program;
-    
-    my $more = join " ", map { $_ && "$_ $_/*" } @more;
-    run_program::run("cd $dir ; $ENV{LD_LOADER} bzip2 -cd $cpio | $ENV{LD_LOADER} cpio -id $name $name/* $more");
-
-    "$dir/$name";
-}
-
-sub bug {
-    my ($h) = getopts(\@_, "h");
-    $h and die "usage: bug\nput file report.bug on fat formatted floppy\n";
-
-    require detect_devices;
-    mount devices::make(detect_devices::floppy()), "/fd0";
-
-    require install_any;
-    output("/fd0/report.bug", install_any::report_bug("/mnt")); #- no other way :-(
-    umount "/fd0";
-    common::sync();
-}
-
-sub loadkeys {
-    my ($h) = getopts(\@_, "h");
-    $h || @_ != 1 and die "usage: loadkeys <keyboard>\n";
-
-    require keyboard;
-    keyboard::setup($_[0]);
-}
-
-sub sync { common::sync() }
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
diff --git a/perl-install/common.pm b/perl-install/common.pm
deleted file mode 100644
index f39cda588..000000000
--- a/perl-install/common.pm
+++ /dev/null
@@ -1,172 +0,0 @@
-package common; # $Id$
-
-use MDK::Common;
-use MDK::Common::System;
-use diagnostics;
-use strict;
-use vars qw(@ISA @EXPORT $SECTORSIZE);
-
-@ISA = qw(Exporter);
-# no need to export ``_''
-@EXPORT = qw($SECTORSIZE __ translate untranslate formatXiB removeXiBSuffix formatTime setVirtual makedev unmakedev salt);
-
-# perl_checker: RE-EXPORT-ALL
-push @EXPORT, @MDK::Common::EXPORT;
-
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-$SECTORSIZE      = 512;
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-
-sub _ {
-    my $s = shift @_; my $t = translate($s);
-    sprintf $t, @_;
-}
-sub __ { $_[0] }
-
-sub salt {
-    my ($nb) = @_;
-    require devices;
-    local *F;
-    open F, devices::make("random") or die "missing random";
-    my $s; read F, $s, $nb;
-    local $_ = pack "b8" x $nb, unpack "b6" x $nb, $s;
-    tr [\0-\x3f] [0-9a-zA-Z./];
-    $_;
-}
-
-sub makedev { ($_[0] << 8) | $_[1] }
-sub unmakedev { $_[0] >> 8, $_[0] & 0xff }
-
-sub translate {
-    my ($s) = @_;
-    $s ? c::dgettext('libDrakX', $s) : '';
-}
-
-sub untranslate {
-    my $s = shift || return;
-    foreach (@_) { translate($_) eq $s and return $_ }
-    die "untranslate failed";
-}
-
-BEGIN { undef *availableRamMB }
-sub availableRamMB()  { 
-    my $s = MDK::Common::System::availableRamMB();
-    #- HACK HACK: if i810 and memsize
-    require detect_devices;
-    return $s - 1 if $s == 128 && grep { $_->{driver} =~ /i810/ } detect_devices::probeall();
-    $s;
-}
-
-sub setVirtual {
-    my $vt = '';
-    local *C;
-    sysopen C, "/dev/console", 2 or die "failed to open /dev/console: $!";
-    ioctl(C, c::VT_GETSTATE(), $vt) or die "ioctl VT_GETSTATE failed";
-    ioctl(C, c::VT_ACTIVATE(), $_[0]) or die "ioctl VT_ACTIVATE failed";
-    ioctl(C, c::VT_WAITACTIVE(), $_[0]) or die "ioctl VT_WAITACTIVE failed";
-    unpack "S", $vt;
-}
-
-
-sub removeXiBSuffix {
-    local $_ = shift;
-
-    /(\d+)\s*kB?$/i and return $1 * 1024;
-    /(\d+)\s*MB?$/i and return $1 * 1024 * 1024;
-    /(\d+)\s*GB?$/i and return $1 * 1024 * 1024 * 1024;
-    /(\d+)\s*TB?$/i and return $1 * 1024 * 1024 * 1024 * 1024;
-    $_;
-}
-sub formatXiB {
-    my ($newnb, $newbase) = (@_, 1);
-    my ($nb, $base);
-    my $decr = sub { 
-	($nb, $base) = ($newnb, $newbase);
-	$base >= 1024 ? ($newbase = $base / 1024) : ($newnb = $nb / 1024);
-    };
-    foreach ('', _("KB"), _("MB"), _("GB")) {
-	$decr->(); 
-	if ($newnb < 1 && $newnb * $newbase < 1) {
-	    my $v = $nb * $base;
-	    my $s = $v < 10 && int(10 * $v - 10 * int($v));
-	    return int($v) . ($s ? ".$s" : '') . $_;
-	}
-    }
-    int($newnb * $newbase) . _("TB");
-}
-
-sub formatTime {
-    my ($s, $m, $h) = gmtime($_[0]);
-    if ($h) {
-	sprintf "%02d:%02d", $h, $m;
-    } elsif ($m > 1) {
-	_("%d minutes", $m);
-    } elsif ($m == 1) {
-	_("1 minute");
-    } else {
-	_("%d seconds", $s);
-    }
-}
-
-sub usingRamdisk { scalar(grep { /ram3/ } cat_("/proc/mounts")) }
-
-sub expand_symlinks_but_simple {
-    my ($f) = @_;
-    my $link = readlink($f);
-    my $f2 = expand_symlinks($f);
-    if ($link && $link !~ m|/|) {
-	# put back the last simple symlink
-	$f2 =~ s|\Q$link\E$|basename($f)|e;
-    }
-    $f2
-}
-
-sub sync { &MDK::Common::System::sync }
-
-# Group the list by n. Returns a reference of lists of length n
-sub group_n_lm {
-    my $n = shift;
-    my @l;
-    push @l, [ splice(@_, 0, $n) ] while (@_);
-    @l
-}
-
-sub screenshot_dir__and_move {
-    my ($dir1, $dir2) = ("$::o->{prefix}/root", '/tmp/stage2');
-    if (-e $dir1) {
-	if (-e "$dir2/DrakX-screenshots") {
-	    cp_af("$dir2/DrakX-screenshots", $dir1);
-	    rm_rf("$dir2/DrakX-screenshots");
-	}
-	$dir1;
-    } else {
-	$dir2;
-    }
-}
-
-sub take_screenshot {
-    my ($in) = @_;
-    my $dir = screenshot_dir__and_move() . '/DrakX-screenshots';
-    my $warn;
-    if (!-e $dir) {
-	mkdir $dir or $in->ask_warn('', _("Can't make screenshots before partitioning")), return;
-	$warn = 1;
-    }
-    my $nb = 1;
-    $nb++ while -e "$dir/$nb.png";
-    system("fb2png /dev/fb0 $dir/$nb.png 0");
-
-    $in->ask_warn('', _("Screenshots will be available after install in %s", "/root/DrakX-screenshots")) if $warn;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/crypto.pm b/perl-install/crypto.pm
deleted file mode 100644
index 6a33baff2..000000000
--- a/perl-install/crypto.pm
+++ /dev/null
@@ -1,167 +0,0 @@
-package crypto; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::System;
-use common;
-use log;
-use ftp;
-
-my %url2land = (
-		fr => _("France"),
-		cr => _("Costa Rica"),
-		be => _("Belgium"),
-		cz => _("Czech Republic"),
-		de => _("Germany"),
-		gr => _("Greece"),
-		no => _("Norway"),
-		se => _("Sweden"),
-		nl => _("Netherlands"),
-		it => _("Italy"),
-		at => _("Austria"),
-	       );
-
-my %land2tzs = (
-		_("France") => [ 'Europe/Paris', 'Europe/Brussels', 'Europe/Berlin' ],
-		_("Belgium") => [ 'Europe/Brussels', 'Europe/Paris', 'Europe/Berlin' ],
-		_("Czech Republic") => [ 'Europe/Prague', 'Europe/Berlin' ],
-		_("Germany") => [ 'Europe/Berlin', 'Europe/Prague' ],
-		_("Greece") => [ 'Europe/Athens', 'Europe/Prague' ],
-		_("Norway") => [ 'Europe/Oslo', 'Europe/Stockholm' ],
-		_("Sweden") => [ 'Europe/Stockholm', 'Europe/Oslo' ],
-		_("United States") => [ 'America/New_York', 'Canada/Atlantic', 'Asia/Tokyo', 'Australia/Sydney', 'Europe/Paris' ],
-		_("Netherlands") => [ 'Europe/Amsterdam', 'Europe/Brussels', 'Europe/Berlin' ],
-		_("Italy") => [ 'Europe/Rome', 'Europe/Brussels', 'Europe/Paris' ],
-		_("Austria") => [ 'Europe/Vienna', 'Europe/Brussels', 'Europe/Berlin' ],
-	       );
-
-my %static_mirrors = (
-#		      "ackbar" => [ "Ackbar", "/updates", "a", "a" ],
-		     );
-
-my %mirrors = ();
-
-my %deps = (
-  'libcrypto.so.0' => 'openssl',
-  'libssl.so.0' => 'openssl',
-  'mod_sxnet.so' => 'mod_ssl-sxnet',
-);
-
-sub require2package { $deps{$_[0]} || $_[0] }
-sub mirror2text { $mirrors{$_[0]} && ($mirrors{$_[0]}[0] . '|' . $_[0]) }
-
-sub mirrors {
-    unless (keys %mirrors) {
-	#- contact the following URL to retrieve list of mirror.
-	#- http://www.linux-mandrake.com/mirrorsfull.list
-	require http;
-	my $f = http::getFile("http://www.linux-mandrake.com/mirrorsfull.list");
-
-	local $SIG{ALRM} = sub { die "timeout" };
-	alarm 60; 
-	foreach (<$f>) {
-	    my ($arch, $url, $dir) = m|updates([^:]*):ftp://([^/]*)(/\S*)| or next;
-	    MDK::Common::System::compat_arch($arch) or
-		log::l("ignoring updates from $url because of incompatible arch: $arch"), next;
-	    my $land = _("United States");
-	    foreach (keys %url2land) {
-		my $qu = quotemeta $_;
-		$url =~ /\.$qu(?:\..*)?$/ and $land = $url2land{$_};
-	    }
-	    $mirrors{$url} = [ $land, $dir ];
-	}
-	http::getFile('/XXX'); #- close connection.
-	alarm 0; 
-
-	#- now add static mirror (in case of something wrong happened above).
-	add2hash(\%mirrors, \%static_mirrors);
-    }
-    keys %mirrors;
-}
-
-sub bestMirror {
-    my ($string) = @_;
-    my %mirror2value;
-
-    foreach my $url (mirrors()) {
-	my $value = 0;
-	my $cvalue = mirrors();
-
-	$mirror2value{$url} ||= 1 + $cvalue;
-	foreach (@{$land2tzs{$mirrors{$url}[0]} || []}) {
-	    $_ eq $string and $mirror2value{$url} > $value and $mirror2value{$url} = $value;
-	    (split '/')[0] eq (split '/', $string)[0] and $mirror2value{$url} > $cvalue and $mirror2value{$url} = $cvalue;
-	    ++$value;
-	}
-    }
-    my ($min_value) = sort { $a <=> $b } values %mirror2value;
-
-    my @possible = grep { $mirror2value{$_} == $min_value } keys %mirror2value;
-    push @possible, grep { $mirror2value{$_} == $min_value } keys %mirror2value;
-    push @possible, grep { $mirror2value{$_} == 1 + $min_value } keys %mirror2value;
-
-    $possible[rand @possible];
-}
-
-#- hack to retrieve Mandrake Linux version...
-sub version {
-    require pkgs;
-    my $pkg = pkgs::packageByName($::o->{packages}, 'mandrake-release');
-    $pkg && pkgs::packageVersion($pkg) || '8.2'; #- safe but dangerous ;-)
-}
-
-sub dir { $mirrors{$_[0]}[1] . '/' . version() }
-sub ftp($) { ftp::new($_[0], dir($_[0])) }
-
-sub getFile {
-    my ($file, $host) = @_;
-    $host ||= $crypto::host;
-    my $dir = dir($host) . ($file =~ /\.rpm$/ && "/RPMS");
-    log::l("getting crypto file $file on directory $dir with login $mirrors{$host}[2]");
-    my ($ftp, $retr) = ftp::new($host, $dir,
-				$mirrors{$host}[2] ? $mirrors{$host}[2] : (),
-				$mirrors{$host}[3] ? $mirrors{$host}[3] : ()
-			       );
-    $$retr->close if $$retr;
-    $$retr   = $ftp->retr($file) or ftp::rewindGetFile();
-    $$retr ||= $ftp->retr($file);
-}
-
-sub getDepslist { getFile("depslist-crypto", $_[0]) or die "unable to get depslist-crypto" }
-
-sub getPackages {
-    my ($prefix, $packages, $mirror) = @_;
-
-    $crypto::host = $mirror;
-
-    #- check first if there is something to get...
-    my $fhdlist = getFile("base/hdlist.cz", $mirror);
-    unless ($fhdlist) {
-	log::l("no updates available, bailing out");
-	return;
-    }
-    
-    #- extract hdlist of crypto, then depslist.
-    require pkgs;
-    my $update_medium = pkgs::psUsingHdlist($prefix, 'ftp', $packages, "hdlist-updates.cz", "1u", "RPMS",
-					    "Updates for Mandrake Linux " . version(), 1, $fhdlist) and
-					      log::l("read updates hdlist");
-    #- keep in mind where is the URL prefix used according to mirror (for install_any::install_urpmi).
-    $update_medium->{prefix} = "ftp://$mirror" . dir($mirror);
-    #- (re-)enable the medium to allow install of package,
-    #- make it an update medium (for install_any::install_urpmi).
-    $update_medium->{selected} = 1;
-    $update_medium->{update} = 1;
-
-    return $update_medium;
-}
-
-sub get {
-    my ($mirror, $dir, @files) = @_;
-    foreach (@files) {
-	log::l("crypto: downloading $_");
-	ftp($mirror)->get($_, "$dir/$_") 
-    }
-    int @files;
-}
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
deleted file mode 100644
index 893161f08..000000000
--- a/perl-install/detect_devices.pm
+++ /dev/null
@@ -1,597 +0,0 @@
-package detect_devices; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($pcitable_addons $usbtable_addons);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use log;
-use common;
-use devices;
-use run_program;
-use c;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my @netdevices = map { my $l = $_; map { "$l$_" } (0..3) } qw(eth tr fddi plip);
-my %serialprobe = ();
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub dev_is_devfs { -e "/dev/.devfsd" }
-
-
-sub get {
-    #- Detect the default BIOS boot harddrive is kind of tricky. We may have IDE,
-    #- SCSI and RAID devices on the same machine. From what I see so far, the default
-    #- BIOS boot harddrive will be
-    #- 1. The first IDE device if IDE exists. Or
-    #- 2. The first SCSI device if SCSI exists. Or
-    #- 3. The first RAID device if RAID exists.
-
-    getIDE(), getSCSI(), getDAC960(), getCompaqSmartArray(), getATARAID();
-}
-sub hds         { grep { $_->{media_type} eq 'hd' && ($::isStandalone || !isRemovableDrive($_)) } get() }
-sub tapes       { grep { $_->{media_type} eq 'tape' && ($::isStandalone || !isRemovableDrive($_)) } get() }
-sub cdroms      { grep { $_->{media_type} eq 'cdrom' } get() }
-sub burners     { grep { isBurner($_) } cdroms() }
-sub dvdroms     { grep { isDvdDrive($_) } cdroms() }
-sub raw_zips    { grep { member($_->{media_type}, 'fd', 'hd') && isZipDrive($_) } get() }
-#-sub jazzs     { grep { member($_->{media_type}, 'fd', 'hd') && isJazzDrive($_) } get() }
-sub ls120s      { grep { member($_->{media_type}, 'fd', 'hd') && isLS120Drive($_) } get() }
-sub zips        { map { $_->{device} .= 4; $_ } raw_zips() }
-
-sub cdroms__faking_ide_scsi {
-    my @l = cdroms();
-    return @l if $::isStandalone;
-    if (my @l_ide = grep { $_->{interface_type} eq 'ide' && isBurner($_) } @l) {
-	require modules;
-	modules::add_alias('scsi_hostadapter', 'ide-scsi');
-	my $nb = 1 + max(-1, map { $_->{device} =~ /scd(\d+)/ } @l);
-	foreach my $e (@l_ide) {	    
-	    log::l("IDEBurner: $e->{device}");
-	    $e->{device} = "scd" . $nb++;
-	}
-    }
-    @l;
-}
-sub zips__faking_ide_scsi {
-    my @l = raw_zips();
-    if (my @l_ide = grep { $_->{interface_type} eq 'ide' && $::isInstall } @l) {
-	require modules;
-	modules::add_alias('scsi_hostadapter', 'ide-scsi');
-	my $nb = 1 + max(-1, map { if_($_->{device} =~ /sd(\w+)/, ord($1) - ord('a')) } getSCSI());
-	foreach my $e (@l_ide) {	    
-	    my $faked = "sd" . chr(ord('a') + $nb++);
-	    log::l("IDE Zip: $e->{device} => $faked");
-	    $e->{device} = $faked;
-	}
-    }
-    map { $_->{device} .= 4; $_ } @l;
-}
-
-sub floppies() {
-    require modules;
-    eval { modules::load("floppy") };
-    my @fds = map {
-	my $info = (!dev_is_devfs() || -e "/dev/$_") && c::floppy_info(devices::make($_));
-	if_($info && $info ne '(null)', { device => $_, media_type => 'fd', info => $info })
-    } qw(fd0 fd1);
-    my @ide = ls120s() and eval { modules::load("ide-floppy") };
-
-    eval { modules::load("usb-storage") } if usbStorage();
-    my @scsi = grep { $_->{media_type} eq 'fd' && !isZipDrive($_) && !isJazzDrive($_) } getSCSI();
-    @ide, @scsi, @fds;
-}
-sub floppies_dev() { map { $_->{device} } floppies() }
-sub floppy { first(floppies_dev()) }
-#- example ls120, model = "LS-120 SLIM 02 UHD Floppy"
-
-sub get_sys_cdrom_info {
-    my (@drives) = @_;
-
-    my @drives_order;
-    foreach (cat_("/proc/sys/dev/cdrom/info")) {
-	my ($t, $l) = split ':';
-	my @l = split ' ', $l;
-	if ($t eq 'drive name') {
-	    @drives_order = map {
-		s/^sr/scd/;
-		my $dev = $_;
-		first(grep { $_->{device} eq $dev } @drives);
-	    } @l;
-	} else {
-	    my $capacity;
-	    if ($t eq 'Can write CD-R') {
-		$capacity = 'burner';
-	    } elsif ($t eq 'Can read DVD') {
-		$capacity = 'DVD';
-	    }
-	    if ($capacity) {
-		each_index {
-		    ($drives_order[$::i] || {})->{capacity} .= "$capacity " if $_;
-		} @l;
-	    }
-	}
-    }
-}
-
-sub isBurner { 
-    my ($e) = @_;
-    $e->{capacity} =~ /burner/ and return 1;
-      
-    #- do not work for SCSI
-    my $f = tryOpen($e->{device}); #- SCSI burner are not detected this way.
-    $f && c::isBurner(fileno($f));
-}
-sub isDvdDrive {
-    my ($e) = @_;
-    $e->{capacity} =~ /DVD/ || $e->{info} =~ /DVD/ and return 1;
-
-    #- do not work for SCSI
-    my $f = tryOpen($e->{device});
-    $f && c::isDvdDrive(fileno($f));
-}
-sub isZipDrive { $_[0]->{info} =~ /ZIP\s+\d+/ } #- accept ZIP 100, untested for bigger ZIP drive.
-sub isJazzDrive { $_[0]->{info} =~ /\bJAZZ?\b/i } #- accept "iomega jaz 1GB"
-sub isLS120Drive { $_[0]->{info} =~ /LS-?120|144MB/ }
-sub isRemovableDrive { &isZipDrive || &isLS120Drive || $_[0]->{media_type} eq 'fd' } #-or &isJazzDrive }
-
-sub isFloppyOrHD {
-    my ($dev) = @_;
-    require partition_table_raw;
-    my $geom = partition_table_raw::get_geometry(devices::make($dev));
-    $geom->{totalsectors} < 10 << 11 ? 'fd' : 'hd';
-}
-
-sub getSCSI() {
-    my @drives;
-    my ($driveNum, $cdromNum, $tapeNum) = qw(0 0 0);
-    my $err = sub { chop; die "unexpected line in /proc/scsi/scsi: $_"; };
-    local $_;
-
-    local *F;
-    open F, "/proc/scsi/scsi" or return;
-    local $_ = <F>; /^Attached devices:/ or return &$err();
-    while ($_ = <F>) {
-	my ($id) = /^Host:.*?Id: (\d+)/ or return &$err();
-	$_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or return &$err();
-	$_ = <F>; my ($type) = /^\s*Type:\s*(.*)/ or &$err();
-	my $dev = { info => "$vendor $model", id => $id, bus => 0 };
-	if ($type =~ /Direct-Access/) {
-	    $dev->{device} = "sd" . chr($driveNum++ + ord('a'));
-	    $dev->{media_type} = isZipDrive($dev) ? 'hd' : isFloppyOrHD($dev->{device});
-	} elsif ($type =~ /Sequential-Access/) {
-	    $dev->{device} = "st" . $tapeNum++;
-	    $dev->{media_type} = 'tape';
-	} elsif ($type =~ /(CD-ROM|WORM)/) {
-	    $dev->{device} = "scd" . $cdromNum++;
-	    $dev->{media_type} = 'cdrom';
-	}
-	push @drives, $dev if $dev->{device};
-    }
-    get_sys_cdrom_info(@drives);
-    @drives;
-}
-
-sub getIDE() {
-    my @idi;
-
-    #- what about a system with absolutely no IDE on it, like some sparc machine.
-    -e "/proc/ide" or return ();
-
-    #- Great. 2.2 kernel, things are much easier and less error prone.
-    foreach my $d (sort @{[glob_('/proc/ide/hd*')]}) {
-	cat_("$d/driver") =~ /ide-scsi/ and next; #- already appears in /proc/scsi/scsi
-	my $t = chomp_(cat_("$d/media"));
-	my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
-	my $info = chomp_(cat_("$d/model")) || "(none)";
-
-	my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
-	push @idi, { media_type => $type, device => basename($d), info => $info, bus => $num/2, id => $num%2, interface_type => 'ide' };
-    }
-    get_sys_cdrom_info(@idi);
-    @idi;
-}
-
-sub getCompaqSmartArray() {
-    my (@idi, $f);
-
-    foreach ('array/ida', 'cpqarray/ida', 'cciss/cciss') {
-	my $prefix = "/proc/driver/$_"; #- kernel 2.4 places it here
-	$prefix = "/proc/$_" if !-e "${prefix}0"; #- kernel 2.2
-
-	my ($name) = m|/(.*)|;
-	for (my $i = 0; -r ($f = "${prefix}$i"); $i++) {
-	    foreach (cat_($f)) {
-		if (m|^\s*($name/.*?):|) {
-		    push @idi, { device => $1, info => "Compaq RAID logical disk", media_type => 'hd', interface_type => 'ida' };
-		}
-	    }
-	}
-    }
-    @idi;
-}
-
-sub getDAC960() {
-    my %idi;
-
-    #- We are looking for lines of this format:DAC960#0:
-    #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
-    foreach (syslog()) {
-	my ($device, $info) = m|/dev/(rd/.*?): (.*?),| or next;
-	$idi{$device} = { info => $info, media_type => 'hd', device => $device, interface_type => 'dac960' };
-    }
-    values %idi;
-}
-
-sub getATARAID {
-    my %l;
-    foreach (syslog()) {
-	my ($device) = m|^\s*(ataraid/d\d+):| or next;
-	$l{$device} = { info => 'ATARAID block device', media_type => 'hd', device => $device, interface_type => 'ataraid' };
-	log::l("ATARAID: $device");
-    }
-    values %l;
-}
-
-sub getNet() {
-    grep { !(($::isStandalone || $::live) && /plip/) && c::hasNetDevice($_) } @netdevices;
-}
-
-#sub getISDN() {
-#    mapgrep(sub {member (($_[0] =~ /\s*(\w*):/), @netdevices), $1 }, split(/\n/, cat_("/proc/net/dev")));
-#}
-
-$pcitable_addons = <<'EOF';
-# add here lines conforming the pcitable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
-EOF
-
-$usbtable_addons = <<'EOF';
-# add here lines conforming the usbtable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
-EOF
-
-sub add_addons {
-    my ($addons, @l) = @_;
-
-    foreach (split "\n", $addons) {
-	/^\s/ and die "bad detect_devices::probeall_addons line \"$_\"";
-	s/^#.*//;
-	s/"(.*?)"/$1/g;
-	next if /^$/;
-	my ($vendor, $id, $driver, $description) = split("\t", $_, 4) or die "bad detect_devices::probeall_addons line \"$_\"";
-	foreach (@l) {
-	    $_->{vendor} == hex $vendor && $_->{id} == hex $id or next;
-	    put_in_hash($_, { driver => $driver, description => $description });
-	}
-    }
-    @l;
-}
-
-sub pci_probe {
-    my ($probe_type) = @_;
-    log::l("full pci_probe") if $probe_type;
-    add_addons($pcitable_addons, map {
-	my %l;
-	@l{qw(vendor id subvendor subid pci_bus pci_device pci_function media_type driver description)} = split "\t";
-	$l{$_} = hex $l{$_} foreach qw(vendor id subvendor subid);
-	$l{bus} = 'PCI';
-	\%l
-    } c::pci_probe($probe_type || 0));
-}
-
-sub usb_probe {
-    -e "/proc/bus/usb/devices" or return ();
-
-    add_addons($usbtable_addons, map {
-	my %l;
-	@l{qw(vendor id media_type driver description)} = split "\t";
-	$l{$_} = hex $l{$_} foreach qw(vendor id);
-	$l{bus} = 'USB';
-	\%l
-    } c::usb_probe());
-}
-
-sub pcmcia_probe {
-    -e '/var/run/stab' || -e '/var/lib/pcmcia/stab' or return ();
-
-    my (@devs, $desc);
-    foreach (cat_('/var/run/stab'), cat_('/var/lib/pcmcia/stab')) {
-	if (/^Socket\s+\d+:\s+(.*)/) {
-	    $desc = $1;
-	} else {
-	    my (undef, $type, $module, undef, $device) = split;
-	    push @devs, { description => $desc, driver => $module, type => $type, device => $device };
-	}
-    }
-    @devs;
-}
-
-# pci_probe with $probe_type is unsafe for pci! (bug in kernel&hardware)
-# pcmcia_probe provides field "device", used in network.pm
-# => probeall with $probe_type is unsafe
-sub probeall {
-    my ($probe_type) = @_;
-    require sbus_probing::main;
-    pci_probe($probe_type), usb_probe(), pcmcia_probe(), sbus_probing::main::probe();
-}
-sub matching_desc {
-    my ($regexp) = @_;
-    grep { $_->{description} =~ /$regexp/i } probeall();
-}
-sub stringlist { 
-    map {
-	sprintf("%-16s: %s%s%s", 
-		$_->{driver} ? $_->{driver} : 'unknown', 
-		$_->{description} eq '(null)' ? sprintf("Vendor=0x%04x Device=0x%04x", $_->{vendor}, $_->{id}) : $_->{description},
-		$_->{media_type} ? sprintf(" [%s]", $_->{media_type}) : '',
-		$_->{subid} && $_->{subid} != 0xffff ? sprintf(" SubVendor=0x%04x SubDevice=0x%04x", $_->{subvendor}, $_->{subid}) : '',
-	       );
-    } probeall(@_); 
-}
-
-sub tryOpen($) {
-    local *F;
-    sysopen F, devices::make($_[0]), c::O_NONBLOCK() and *F;
-}
-
-sub tryWrite($) {
-    local *F;
-    sysopen F, devices::make($_[0]), 1 | c::O_NONBLOCK() and *F;
-}
-
-sub syslog {
-    -r "/tmp/syslog" and return map { /<\d+>(.*)/ } cat_("/tmp/syslog");
-    `$ENV{LD_LOADER} /bin/dmesg`;
-}
-
-sub get_mac_model() {
-    my $mac_model = cat_("/proc/device-tree/model") || die "Can't open /proc/device-tree/model";
-    log::l("Mac model: $mac_model");
-    $mac_model;	
-}
-
-sub get_mac_generation() {
-    my $generation = cat_("/proc/cpuinfo") || die "Can't open /proc/cpuinfo";
-    my @genarray = split(/\n/, $generation);
-    my $count = 0;
-    while ($count <= @genarray) {
-	if ($genarray[$count] =~ /pmac-generation/) {
-	    @genarray = split(/:/, $genarray[$count]);
-	    return $genarray[1];
-	}
-	$count++;
-    }
-    return "Unknown Generation";	
-}
-
-sub hasSMP { c::detectSMP() }
-sub hasPCMCIA { $::o->{pcmcia} } #- because /proc/pcmcia seems not to be present on 2.4 at least (or use /var/run/stab)
-
-#- try to detect a laptop, we assume pcmcia service is an indication of a laptop or
-#- the following regexp to match graphics card apparently only used for such systems.
-sub isLaptop {
-    hasPCMCIA() || (matching_desc('C&T.*655[45]\d') || matching_desc('C&T.*68554') ||
-		    matching_desc('Neomagic.*Magic(Media|Graph)') ||
-		    matching_desc('ViRGE.MX') || matching_desc('S3.*Savage.*[IM]X') ||
-		    matching_desc('ATI.*(Mobility|LT)'));
-}
-
-sub hasUltra66 {
-    die "hasUltra66 deprecated";
-    #- keep it BUT DO NOT USE IT as now included in kernel.
-    cat_("/proc/cmdline") =~ /(ide2=(\S+)(\s+ide3=(\S+))?)/ and return $1;
-
-    my @l = map { $_->{verbatim} } matching_desc('HPT|Ultra66') or return;
-    
-    my $ide = sprintf "ide2=0x%x,0x%x ide3=0x%x,0x%x",
-      @l == 2 ?
-	(map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..4] } @l) :
-	(map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..6] } @l);
-
-    log::l("HPT|Ultra66: found $ide");
-    $ide;
-}
-
-sub whatParport() {
-    my @res = ();
-    foreach (0..3) {
-	my $elem = {};
-	local *F;
-	open F, "/proc/parport/$_/autoprobe" or open F, "/proc/sys/dev/parport/parport$_/autoprobe" or next;
-	{
-	    local $_;
-	    while (<F>) { 
-		if (/(.*):(.*);/) {
-		    $elem->{$1} = $2;
-		    $elem->{$1} =~ s/Hewlett[-\s_]Packard/HP/;
-		    $elem->{$1} =~ s/HEWLETT[-\s_]PACKARD/HP/;
-		}
-	    }
-	}
-	push @res, { port => "/dev/lp$_", val => $elem};
-    }
-    @res;
-}
-
-sub usbMice      { grep { ($_->{media_type} =~ /\|Mouse/ || $_->{driver} =~ /Mouse:USB/) &&
-			    $_->{driver} !~ /Tablet:wacom/} usb_probe() };
-sub usbWacom     { grep { $_->{driver} =~ /Tablet:wacom/ } usb_probe() }
-sub usbKeyboards { grep { $_->{media_type} =~ /\|Keyboard/ } usb_probe() }
-sub usbStorage   { grep { $_->{media_type} =~ /Mass Storage\|/ } usb_probe() }
-
-sub whatUsbport() {
-    # The printer manufacturer and model names obtained with the usb_probe()
-    # function were very messy, once there was a lot of noise around the
-    # manufacturers name ("Inc.", "SA", "International", ...) and second,
-    # all Epson inkjets answered with the name "Epson Stylus Color 760" which
-    # lead many newbies to install their Epson Stylus Photo XXX as an Epson
-    # Stylus Color 760 ...
-    #
-    # This routine based on an ioctl request gives very clean and correct
-    # manufacturer and model names, so that they are easily matched to the
-    # printer entries in the Foomatic database
-    my $i; 
-    my @res = ();
-    foreach $i (0..15) {
-	my $port = "/dev/usb/lp$i";
-	my $realport = devices::make("$port");
-	next if (!$realport);
-	next if (! -r $realport);
-	open PORT, "$realport" or do next;
-	my $idstr = "";
-	# Calculation of IOCTL function 0x84005001 (to get device ID
-	# string):
-	# len = 1024
-	# IOCNR_GET_DEVICE_ID = 1
-	# LPIOC_GET_DEVICE_ID(len) =
-	#     _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
-	# _IOC(), _IOC_READ as defined in /usr/include/asm/ioctl.h
-	# Use "eval" so that program does not stop when IOCTL fails
-	eval{ my $output = "\0" x 1024; 
-	      ioctl(PORT, 0x84005001, $output);
-	      $idstr = $output; } or do {
-		  close PORT;
-		  next;
-	      };
-	close PORT;
-	# Remove non-printable characters
-	$idstr =~ tr/[\x00-\x1f]/\./;
-	# Extract the printer data from the ID string
-	my ($manufacturer, $model, $description) = ("", "", "");
-	if (($idstr =~ /MFG:([^;]+);/) ||
-	    ($idstr =~ /MANUFACTURER:([^;]+);/)) {
-	    $manufacturer = $1;
-	    $manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
-	    $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
-	}
-	if (($idstr =~ /MDL:([^;]+);/) ||
-	    ($idstr =~ /MODEL:([^;]+);/)) {
-	    $model = $1;
-	}
-	if (($idstr =~ /DES:([^;]+);/) ||
-	    ($idstr =~ /DESCRIPTION:([^;]+);/)) {
-	    $description = $1;
-	    $description =~ s/Hewlett[-\s_]Packard/HP/;
-	    $description =~ s/HEWLETT[-\s_]PACKARD/HP/;
-	}
-	# Was there a manufacturer and a model in the string?
-	if (($manufacturer eq "") || ($model eq "")) {
-	    next;
-	}
-	# No description field? Make one out of manufacturer and model.
-	if ($description eq "") {
-	    $description = "$manufacturer $model";
-	}
-	# Store this auto-detection result in the data structure
-	push @res, { port => $port, val => 
-		     { CLASS => 'PRINTER',
-		       MODEL => $model,
-		       MANUFACTURER => $manufacturer,
-		       DESCRIPTION => $description,
-		   }};
-    }
-    @res;
-}
-
-#-CLASS:PRINTER;
-#-MODEL:HP LaserJet 1100;
-#-MANUFACTURER:Hewlett-Packard;
-#-DESCRIPTION:HP LaserJet 1100 Printer;
-#-COMMAND SET:MLC,PCL,PJL;
-sub whatPrinter() {
-    my @res = (whatParport(), whatUsbport());
-    grep { $_->{val}{CLASS} eq "PRINTER"} @res;
-}
-
-sub whatPrinterPort() {
-    grep { tryWrite($_)} qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9);
-}
-
-sub probeSerialDevices {
-    #- make sure the device are created before probing.
-    foreach (0..3) { devices::make("/dev/ttyS$_") }
-
-    #- for device already probed, we can safely (assuming device are
-    #- not moved during install :-)
-    #- include /dev/mouse device if using an X server.
-    -d "/var/lock" or mkdir "/var/lock", 0755;
-    -l "/dev/mouse" and $serialprobe{"/dev/" . readlink "/dev/mouse"} = undef;
-    foreach (keys %serialprobe) { m|^/dev/(.*)| and touch "/var/lock/LCK..$1" }
-
-    print STDERR "Please wait while probing serial ports...\n";
-    #- start probing all serial ports... really faster than before ...
-    #- ... but still take some time :-)
-    local *F; open F, "$ENV{LD_LOADER} serial_probe |";
-    local $_;
-    my %current = (); while (<F>) {
-	$serialprobe{$current{DEVICE}} = { %current } and %current = () if /^\s*$/ && $current{DEVICE};
-	$current{$1} = $2 if /^([^=]+)=(.*?)\s*$/;
-    }
-    close F;
-
-    foreach (values %serialprobe) {
-	$_->{DESCRIPTION} =~ /modem/i and $_->{CLASS} = 'MODEM'; #- hack to make sure a modem is detected.
-	$_->{DESCRIPTION} =~ /olitec/i and $_->{CLASS} = 'MODEM'; #- hack to make sure such modem gets detected.
-	log::l("probed $_->{DESCRIPTION} of class $_->{CLASS} on device $_->{DEVICE}");
-    }
-}
-
-sub probeSerial($) { $serialprobe{$_[0]} }
-
-sub hasModem($) {
-    $serialprobe{$_[0]} and $serialprobe{$_[0]}{CLASS} eq 'MODEM' and $serialprobe{$_[0]}{DESCRIPTION};
-}
-
-sub hasMousePS2 {
-    my $t; sysread(tryOpen($_[0]) || return, $t, 256) != 1 || $t ne "\xFE";
-}
-
-sub raidAutoStartIoctl {
-    local *F;
-    sysopen F, devices::make("md0"), 2 or return;
-    ioctl F, 2324, 0;
-}
-
-sub raidAutoStartRaidtab {
-    my (@parts) = @_;
-    require raid;
-    #- faking a raidtab, it seems to be working :-)))
-    #- (choosing any inactive md)
-    raid::inactivate_all();
-    foreach (@parts) {
-	my ($nb) = grep { !raid::is_active("md$_") } 0..7;
-	output("/etc/raidtab", "raiddev /dev/md$nb\n  device " . devices::make($_->{device}) . "\n");
-	run_program::run('raidstart', devices::make("md$nb"));
-    }
-}
-
-sub raidAutoStart {
-    my (@parts) = @_;
-
-    log::l("raidAutoStart");
-    eval { modules::load('md') };
-    my %personalities = ( '1' => 'linear', '2' => 'raid0', '3' => 'raid1', '4' => 'raid5' );
-    raidAutoStartIoctl() or raidAutoStartRaidtab(@parts);
-    if (my @needed_perso = map { 
-	if_(/^kmod: failed.*md-personality-(.)/ ||
-	    /^md: personality (.) is not loaded/, $personalities{$1}) } syslog()) {
-	eval { modules::load(@needed_perso) };
-	raidAutoStartIoctl() or raidAutoStartRaidtab(@parts);
-    }
-}
-
-sub is_a_recent_computer {
-    my ($frequence) = map { /cpu MHz\s*:\s*(.*)/ } cat_("/proc/cpuinfo");
-    $frequence > 600;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
diff --git a/perl-install/devices.pm b/perl-install/devices.pm
deleted file mode 100644
index 260793e30..000000000
--- a/perl-install/devices.pm
+++ /dev/null
@@ -1,185 +0,0 @@
-package devices; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use run_program;
-use log;
-use c;
-
-sub size($) {
-    local *F;
-    sysopen F, $_[0], 0 or log::l("open $_[0]: $!"), return 0;
-
-    my $valid_offset = sub { sysseek(F, $_[0], 0) && sysread(F, my $a, 1) };
-
-    #- first try getting the size nicely
-    if (my $size = c::total_sectors(fileno F)) {
-	return $size * $common::SECTORSIZE;
-    }
-
-    #- sad it didn't work, well searching the size using the dichotomy algorithm!
-    my $low = 0;
-    my ($high, $mid);
-
-    #- first find n where 2^n < size <= 2^n+1
-    for ($high = 1; $high > 0 && &$valid_offset($high); $high *= 2) { $low = $high; }
-
-    while ($low < $high - 1) {
-	$mid = int ($low + $high) / 2;
-	&$valid_offset($mid) ? $low : $high = $mid;
-    }
-    $low + 1;
-}
-
-sub del_loop {
-    my ($dev) = @_;
-    run_program::run("losetup", "-d", $dev);
-}
-sub find_free_loop {
-    foreach (0..7) {
-	my $dev = make("loop$_");
-	local *F;
-	sysopen F, $dev, 2 or next;
-	!ioctl(F, c::LOOP_GET_STATUS(), my $tmp) && $! == 6 or next; #- 6 == ENXIO
-	close F;
-	return $dev;
-    }
-    die "no free loop found";
-}
-sub set_loop {
-    my ($file, $encrypt_key, $encryption) = @_;
-    my $dev = find_free_loop();
-
-    if ($encrypt_key && $encryption) {
-	my $cmd = "losetup -p 0 -e $encryption $dev $file";
-	log::l("calling $cmd");
-	local *F;
-	open F, "|$cmd";
-	print F $encrypt_key;
-	close F or die "losetup failed";
-    } else {
-	run_program::run("losetup", $dev, $file) or return;
-    }
-    $dev;
-}
-
-sub entry {
-    my ($type, $major, $minor);
-    local ($_) = @_;
-
-    if (/^0x([\da-f]{3,4})$/i) {
-	$type = c::S_IFBLK();
-	($major, $minor) = unmakedev(hex $1);
-    } elsif (/^sd(.)(\d{0,2})/) {
-	$type = c::S_IFBLK();
-	$major = 8;
-	$minor = 16 * (ord($1) - ord('a')) + ($2 || 0);
-    } elsif (/^hd(.)(\d{0,2})/) {
-	$type = c::S_IFBLK();
-	($major, $minor) =
-	    @{ $ {{'a' => [3, 0], 'b' => [3, 64],
-		   'c' => [22,0], 'd' => [22,64],
-		   'e' => [33,0], 'f' => [33,64],
-		   'g' => [34,0], 'h' => [34,64],
-		   'i' => [56,0], 'j' => [56,64],
-		   'k' => [57,0], 'l' => [57,64],
-                   'm' => [88,0], 'n' => [88,64],
-                   'o' => [89,0], 'p' => [89,64],
-                   'q' => [90,0], 'r' => [90,64],
-                   's' => [91,0], 't' => [91,64],
-	       }}{$1} or die "unknown device $_" };
-	$minor += $2 || 0;
-    } elsif (/^ram(.*)/) {
-	$type = c::S_IFBLK();
-	$major = 1;
-	$minor = $1 eq '' ? 1 : $1;
-    } elsif (m|^rd/c(\d+)d(\d+)(p(\d+))?|) {
-	# dac 960 "rd/cXdXXpX"
-        $type = c::S_IFBLK();
-	$major = 48 + $1;
-	$minor = 8 * $2 + $4;
-    } elsif (m,(ida|cciss)/c(\d+)d(\d+)(?:p(\d+))?,) {
-	# Compaq Smart Array "ida/c0d0{p1}"
-	$type = c::S_IFBLK();
-	$major = ($1 eq 'ida' ? 72 : 104) + $2;
-	$minor = 16 * $3 + ($4 || 0);
-    } elsif (m,(ataraid)/d(\d+)(?:p(\d+))?,) {
-	# ATA raid "ataraid/d0{p1}"
-	$type = c::S_IFBLK();
-	$major = 114;
-	$minor = 16 * $1 + ($2 || 0);
-    } elsif (/(.*?)(\d+)$/) {
-	    ($type, $major, $minor) =
-	     @{ ${{"fd"          => [ c::S_IFBLK(), 2,  0 ],
-		   "hidbp-mse-"  => [ c::S_IFCHR(), 10, 32 ],
-		   "lp"          => [ c::S_IFCHR(), 6,  0 ],
-		   "usb/lp"      => [ c::S_IFCHR(), 180, 0 ],
-		   "input/event" => [ c::S_IFCHR(), 13, 64 ],
-		   "loop"        => [ c::S_IFBLK(), 7,  0 ],
-		   "md"          => [ c::S_IFBLK(), 9,  0 ],
-		   "nst"         => [ c::S_IFCHR(), 9, 128],
-		   "scd"         => [ c::S_IFBLK(), 11, 0 ],
-		   "ttyS"        => [ c::S_IFCHR(), 4, 64 ],
-	       }}{$1}};
-	    $minor += $2;
-    }
-    unless ($type) {
-	($type, $major, $minor) =
-	     @{ ${{"aztcd"   => [ c::S_IFBLK(), 29, 0 ],
-		   "bpcd"    => [ c::S_IFBLK(), 41, 0 ],
-		   "cdu31a"  => [ c::S_IFBLK(), 15, 0 ],
-		   "cdu535"  => [ c::S_IFBLK(), 24, 0 ],
-		   "cm206cd" => [ c::S_IFBLK(), 32, 0 ],
-		   "gscd"    => [ c::S_IFBLK(), 16, 0 ],
-		   "mcd"     => [ c::S_IFBLK(), 23, 0 ],
-		   "mcdx"    => [ c::S_IFBLK(), 20, 0 ],
-		   "mem"     => [ c::S_IFCHR(), 1,  1 ],
-		   "optcd"   => [ c::S_IFBLK(), 17, 0 ],
-		   "kbd"     => [ c::S_IFCHR(), 11, 0 ],
-		   "psaux"   => [ c::S_IFCHR(), 10, 1 ],
-		   "atibm"   => [ c::S_IFCHR(), 10, 3 ],
-		   "random"  => [ c::S_IFCHR(), 1,  8 ],
-		   "sbpcd"   => [ c::S_IFBLK(), 25, 0 ],
-		   "sjcd"    => [ c::S_IFBLK(), 18, 0 ],
-		   "tty"     => [ c::S_IFCHR(),  5, 0 ],
-		   "usbmouse"=> [ c::S_IFCHR(), 13, 63], #- aka /dev/input/mice
-		   "adbmouse"=> [ c::S_IFCHR(), 10, 10], #- PPC
-		   "zero"    => [ c::S_IFCHR(), 1,  5 ],		     
-	       }}{$_} or die "unknown device $_ (caller is " . join(":", caller()) . ")" };
-    }
-    ($type, $major, $minor);
-}
-
-
-sub make($) {
-    local $_ = my $file = $_[0];
-
-    if (m,^(.*/(?:dev|tmp))/(.*),) {
-	$_ = $2;
-    } else {
-	$file =~ m|^/| && -e $file or $file = "/tmp/$_";
-	$file =~ m|^/| && -e $file or $file = "/dev/$_";
-    }
-    -e $file and return $file; #- assume nobody takes fun at creating files named as device
-
-    my ($type, $major, $minor) = eval { entry($_) };
-    $@ and die "unknown device $_ (caller is " . join(":", caller()) . ")";
-
-    if ($file =~ m|/dev/| && -e '/dev/.devfsd') {
-	#- argh, creating devices is no good with devfs...
-	#- return the file even if the device file doesn't exist
-	#- the caller will fail or not, better compatibility than raising an exception here
-	return $file;
-    }
-
-    #- make a directory for this inode if needed.
-    mkdir dirname($file), 0755;
-
-    syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or die "mknod failed (dev $_): $!";
-
-    $file;
-}
-
-1;
diff --git a/perl-install/diskdrake/diskdrake.html b/perl-install/diskdrake/diskdrake.html
deleted file mode 100644
index 7e85c3cde..000000000
--- a/perl-install/diskdrake/diskdrake.html
+++ /dev/null
@@ -1,139 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
-<html>
-  <head>
-    <title>DiskDrake</title>
-  </head>
-  <body bgcolor="#ffffff">
-
-<center>
-<table width=80% border=0 cellpadding=10 cellspacing=10>
-<tr>
-<td bgcolor=#ffffff>
-
-    <p>
-    <img src="images/diskdrake1-def.jpg" alt="diskdrake logo" width=400 height=100>
-    <p>  
-
-    <H2>I- What's it?</H2>
-
-      The purpose of the DiskDrake project is to make easier the hard disk
-      partitionning. It is graphical, simple and powerful. The license is
-      the GPL (General Public License).
-      <BR>
-      Different skill levels will be available (newbie, advanced user, expert).
-      <BR>
-      It's written entirely in Perl and Perl/Gtk. It uses resize_fat which is
-      a perl rewrite of the work of Andrew Clausen (libresize).
-      <P>
-      DiskDrake is a project from MandrakeSoft, the company behind the popular
-      <a href="http://www.linux-mandrake.com">Linux-Mandrake</a>
-      operating-system.
-      <P>
-      A <A href="http://www.eatel.net/~john/diskdrake/faq.html">FAQ</A> is in construction.
-
-    <H2>II - What's available now</H2>
-
-    DiskDrake should be usable now...
-
-    it can:
-    <UL>
-	<LI> create partitions
-	<LI> delete partitions
-	<LI> change type of partition
-	<LI> format partitions
-	<LI> assign a mount point (<IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(21/07/99)</SMALL> propose a list
-	of classic mount points and verify the mount point is valid)
-	<LI> mount partitions
-	<LI> resize fat partitions
-	<LI> resize partitions (when not caring loosing its data)
-	<LI> clear partition table
-	<LI> auto allocation (usefull for install)
-	<LI> write fstab
-    </UL>
-
-with nice contextual menu (shortcuts available, but dangerous as all actions are
-available, whereas with the contextual menu these actions are hidden. This will
-change)
-
-    <P><IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(25/07/99)</SMALL> 
-    A new Expert button appear now. It toggles between
-    expert and normal mode. Some changes in information displayed:
-    <UL>
-       <LI> when you click (or focus) the drive tab (eg: hda), you get
-       information about your drive: size, geometry
-       (cylinders/sectors/heads number), type (eg: IBM DDRS-39130D), and bus/id.
-       In normal mode you have only the size.
-       <LI> the windows drive letter (eg: C: D: ...)
-       <LI> the `start sector' information from normal mode, it still appears in
-       expert mode
-       <LI> the start&end cylinder of each partition is now displayed in expert
-       mode
-       <LI> the type is displayed numerically in expert mode
-    </UL>
-
-    <P><IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(25/07/99)</SMALL>
-    The mount point in the `Create' window and `Change type' window is now a
-    combo box. It lets you choose between classical mount points (/ /usr /var
-    ...) but with already allocated mount points removed.
-
-    <H2>III - Actual developpment</H2>
-
-    We need people!!!
-
-    <UL>
-      <LI><B>Tests</B> and remove bugs (no known yet :)
-      <LI>integrate ext2resize (which has been release in version 1.0.0 <IMG
-      SRC="/images/updated.gif" ALT="updated"><SMALL>(26/07/99)</SMALL>)
-      <LI>add possibility to move partition without loosing data (by copying all
-      data) <IMG SRC="/images/updated.gif" ALT="updated">
-      <LI>Improve the look
-      <LI>Add a text-only version
-      <LI>Help text, tutorial...
-      <LI>Internationalization
-      <LI>Add some features...
-      <LI>Packaging (rpm, deb, slp...)
-    </UL>
-	
-    <H2>IV- ScreenShot</H2>
-
-    Warning: features was the main focus, so don't be too hard :)
-
-    <P>
-      <CENTER><IMG SRC="1.gif"></IMG></CENTER>
-      <CENTER>DiskDrake main interface</CENTER>      
-      
-      <BR>
-      <CENTER><IMG SRC="3.gif"></IMG></CENTER>
-      <CENTER>create dialog box</CENTER>      
-      
-    <H2>V - Contacts</H2>
-    
-    A Mailing List has been created to allow developpers to discuss about DiskDrake.<BR>
-
-    <P>
-    Send a mail to: <A HREF="mailto:sympa@linux-mandrake.com">sympa@linux-mandrake.com</A>
-
-    <BR>Put in the subject: subscribe diskdrake
-    <BR>When you're subscribed, send your messages to: <A HREF="mailto:diskdrake@linux-mandrake.com">diskdrake@linux-mandrake.com</A>
-
-    <P>Otherwise you can contact directly the <A HREF="mailto:pixel@linux-mandrake.com">project leader</A>.
-
-    <H2>VI - Download</H2>
-    
-    Warning: You must have <a href="http://www.perl.com/CPAN/modules/by-module/Gtk/Gtk-Perl-0.5121.tar.gz">Gtk-Perl</a>.
-    You can get the rpm from the <a href="http://linux-mandrake.com/cooker/">Cooker</a> distribution.
-   
-    <P>You also need perl version 5.00503 or better
-
-    <P> Here you can find the plain tgz or a rpm:
-    <a href="ftp://ftp.phys.ttu.edu/pub/mandrake-devel/contrib/others/diskdrake/">diskdrake</a> (Other mirrors in <a href="http://linux-mandrake.com/cooker/">Cooker</a>)
-
-</td>
-</tr>
-</table>
-<p>
-<a href="/en/fpowerpack.php3"><img src="/images/mandrake6.0-loop.gif" width=468 height=60 alt="Mandrake 6.0 PowerPack"></a>
-</center>    
-  </body>
-  <address><a href="mailto:pixel@linux-mandrake.com"></a></address>
-</html>
diff --git a/perl-install/diskdrake/hd_gtk.pm b/perl-install/diskdrake/hd_gtk.pm
deleted file mode 100644
index 2de971f89..000000000
--- a/perl-install/diskdrake/hd_gtk.pm
+++ /dev/null
@@ -1,382 +0,0 @@
-package diskdrake::hd_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::main;
-use my_gtk qw(:helpers :wrappers :ask);
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use diskdrake::interactive;
-use run_program;
-use loopback;
-use devices;
-use raid;
-use any;
-use log;
-use fsedit;
-use fs;
-
-my ($width, $height, $minwidth) = (400, 50, 5);
-my ($all_hds, $in, $current_kind, $current_entry, $update_all);
-my ($w, @notebook, $done_button);
-
-=begin
-
-struct {
-  string name      # which is displayed in tab of the notebook
-  bool no_auto     # wether the kind can disappear after creation
-  string type      # one of { 'hd', 'raid', 'lvm', 'loopback', 'removable', 'nfs', 'smb' }
-  hd | hd_lvm | part_raid[] | part_loopback[] | raw_hd[]  val
-
-  # 
-  widget main_box
-  widget display_box
-  widget action_box
-  widget info_box
-} current_kind
-
-part current_entry
-
-notebook current_kind[]
-
-=cut
-
-sub main {
-    ($in, $all_hds, my $nowizard) = @_;
-
-    @notebook = ();
-
-    local $in->{grab} = 1;
-
-    $w = my_gtk->new('DiskDrake');
-    my $rc = "/usr/share/libDrakX/diskdrake.rc";
-    -r $rc or $rc = dirname(__FILE__) . "/../diskdrake.rc";
-    -r $rc or $rc = dirname(__FILE__) . "/../share/diskdrake.rc";
-    Gtk::Rc->parse($rc);
-
-    # TODO
-#    is_empty_array_ref($all_hds->{raids}) or raid::stopAll;
-#    updateLoopback();
-
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::VBox(0,7),
-		    0, (my $filesystems_button_box = filesystems_button_box()),
-		    1, (my $notebook_widget = new Gtk::Notebook),
-		    0, (my $per_kind_action_box = new Gtk::HBox(0,0)),
-		    0, (my $general_action_box  = new Gtk::HBox(0,0)),
-		   ),
-	  );
-    my $lock;
-    $update_all = sub {
-	$lock and return;
-	$lock = 1;
-	partition_table::assign_device_numbers($_) foreach fsedit::all_hds($all_hds);
-	create_automatic_notebooks($notebook_widget);
-	general_action_box($general_action_box, $nowizard);
-	per_kind_action_box($per_kind_action_box, $current_kind);
-	current_kind_changed($in, $current_kind);
-	current_entry_changed($current_kind, $current_entry);
-	$lock = 0;
-    };
-    create_automatic_notebooks($notebook_widget);
-
-    $notebook_widget->signal_connect('switch_page' => sub {
-	$current_kind = $notebook[$_[2]];
-	$current_entry = '';
-	$update_all->();
-    });
-    $w->sync;
-    $done_button->grab_focus;
-    $my_gtk::pop_it = 1;
-    $in->ask_okcancel(_("Read carefully!"), _("Please make a backup of your data first"), 1) or return
-      if $::isStandalone;
-    $in->ask_warn('', 
-_("If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
-at the beginning of the disk")) if (arch() eq 'alpha') and !$::isEmbedded;
-
-    $w->main;
-}
-
-sub try {
-    my ($name, @args) = @_;
-    my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
-    try_($name, \&{$f}, @args);
-}
-sub try_ {
-    my ($name, $f, @args) = @_;
-
-    fsedit::undo_prepare($all_hds) if $name ne 'Undo';
-
-    my $v = eval { $f->($in, @args, $all_hds) };
-    if (my $err = $@) {
-	$err =~ /setstep/ and die '';
-    	$in->ask_warn(_("Error"), formatError($err));
-    }
-
-    $current_entry = '' if !diskdrake::interactive::is_part_existing($current_entry, $all_hds);
-    $update_all->();
-
-    if ($v && member($name, 'Done', 'Wizard')) {
-	$::isEmbedded ? kill( 'USR1', $::CCPID) : Gtk->main_quit; 
-    }
-}
-
-################################################################################
-# generic: helpers
-################################################################################
-sub add_kind2notebook {
-    my ($notebook_widget, $kind) = @_;
-    die if $kind->{main_box};
-
-    $kind->{display_box} = gtkset_usize(new Gtk::HBox(0,0), $width, $height);
-    $kind->{action_box} = gtkset_usize(new Gtk::VBox(0,0), 150, 180);
-    $kind->{info_box} = new Gtk::VBox(0,0);
-    $kind->{main_box} =
-      gtkpack_(new Gtk::VBox(0,7),
-	       0, $kind->{display_box},
-	       1, gtkpack_(new Gtk::HBox(0,7),
-			   0, $kind->{action_box},
-			   1, $kind->{info_box}));
-    my_gtk::add2notebook($notebook_widget, $kind->{name}, $kind->{main_box});
-    push @notebook, $kind;
-    $kind;
-}
-
-sub general_action_box {
-    my ($box, $nowizard) = @_;
-    $_->widget->destroy foreach $box->children;
-    my @actions = (if_($::isInstall && !$nowizard, __("Wizard")), 
-		   diskdrake::interactive::general_possible_actions($in, $all_hds), 
-		   __("Done"));
-    foreach my $s (@actions) {
-	my $button = new Gtk::Button(translate($s));
-	$done_button = $button if $s eq 'Done';
-	gtkadd($box, gtksignal_connect($button, clicked => sub { try($s) }));
-    }
-}
-sub per_kind_action_box {
-    my ($box, $kind) = @_;
-    $_->widget->destroy foreach $box->children;
-
-    $kind->{type} =~ /hd|lvm/ or return;
-
-    foreach my $s (diskdrake::interactive::hd_possible_actions($in, kind2hd($kind), $all_hds)) {
-	gtkadd($box, 
-	       gtksignal_connect(new Gtk::Button(translate($s)),
-				 clicked => sub { try($s, kind2hd($kind)) }));
-    }
-}
-sub per_entry_action_box {
-    my ($box, $kind, $entry) = @_;
-    $_->widget->destroy foreach $box->children;
-
-    if ($entry) {
-	my @buttons = map { 
-	    my $s = $_;
-	    my $w = new Gtk::Button(translate($s));
-	    $w->signal_connect(clicked => sub { try($s, kind2hd($kind), $entry) });
-	    $w;
-	} diskdrake::interactive::part_possible_actions($in, kind2hd($kind), $entry, $all_hds);
-
-	gtkadd($box, gtkadd(new Gtk::Frame(_("Choose action")),
-			    createScrolledWindow(gtkpack__(new Gtk::VBox(0,0), @buttons)))) if @buttons;
-    } else {
-	my $txt = !$::isStandalone && fsedit::is_one_big_fat($all_hds->{hds}) ?
-_("You have one big FAT partition
-(generally used by MicroSoft Dos/Windows).
-I suggest you first resize that partition
-(click on it, then click on \"Resize\")") : _("Please click on a partition");
-	gtkpack($box, gtktext_insert(new Gtk::Text, $txt));
-    }
-}
-
-sub per_entry_info_box {
-    my ($box, $kind, $entry) = @_;
-    $_->widget->destroy foreach $box->children;
-    my $info;
-    if ($entry) {
-	$info = diskdrake::interactive::format_part_info(kind2hd($kind), $entry);
-    } elsif ($kind->{type} =~ /hd|lvm/) {
-	$info = diskdrake::interactive::format_hd_info($kind->{val});
-    }
-    gtkpack($box, gtkadd(new Gtk::Frame(_("Details")), gtkset_justify(new Gtk::Label($info), 'left')));
-}
-
-sub current_kind_changed {
-    my ($in, $kind) = @_;
-
-    $_->widget->destroy foreach $kind->{display_box}->children;
-
-    my $v = $kind->{val};
-    my @parts = 
-      $kind->{type} eq 'raid' ? grep {$_} @$v :
-      $kind->{type} eq 'loopback' ? @$v : fsedit::get_fstab_and_holes($v);
-    my $totalsectors = 
-      $kind->{type} =~ /raid|loopback/ ? sum(map { $_->{size} } @parts) : $v->{totalsectors};
-    create_buttons4partitions($kind, $totalsectors, @parts);
-}
-
-sub current_entry_changed {
-    my ($kind, $entry) = @_;
-    $current_entry = $entry;
-    if ($kind) {
-	per_entry_action_box($kind->{action_box}, $kind, $entry);
-	per_entry_info_box($kind->{info_box}, $kind, $entry);
-    }
-}
-
-sub create_automatic_notebooks {
-    my ($notebook_widget) = @_;
-    my @l = fsedit::all_hds($all_hds);
-
-    $_->{marked} = 0 foreach @notebook;
-    my $may_add = sub {
-	my ($kind) = @_;
-	my @l = grep { $kind->{val} == $_->{val} } @notebook;
-	@l > 1 and log::l("weird: create_automatic_notebooks");
-	$kind = $l[0] || add_kind2notebook($notebook_widget, $kind);
-	$kind->{marked} = 1;
-    };
-    $may_add->(hd2kind($_)) foreach @{$all_hds->{hds}};
-    $may_add->(lvm2kind($_)) foreach @{$all_hds->{lvms}};
-    $may_add->(raid2kind()) if grep {$_} @{$all_hds->{raids}};
-    $may_add->(loopback2kind()) if @{$all_hds->{loopbacks}};
-
-    @notebook = grep_index {
-	my $b = $_->{marked} or $notebook_widget->remove_page($::i);
-	$b;
-    } @notebook;
-    @notebook or die '';
-}
-
-################################################################################
-# parts: helpers
-################################################################################
-sub create_buttons4partitions {
-    my ($kind, $totalsectors, @parts) = @_;
-
-    $width = max($width, 0.9 * second($w->{window}->window->get_size)) if $w->{window}->window;
-
-    my $ratio = $totalsectors ? ($width - @parts * $minwidth) / $totalsectors : 1;
-    while (1) {
-	my $totalwidth = sum(map { $_->{size} * $ratio + $minwidth } @parts);
-	$totalwidth <= $width and last;
-	$ratio /= $totalwidth / $width * 1.1;
-    }
-
-    foreach my $entry (@parts) {
-	my $w = new Gtk::Button($entry->{mntpoint} || '') or die '';
-	$w->signal_connect(focus_in_event     => sub { current_entry_changed($kind, $entry) });
-	$w->signal_connect(button_press_event => sub { current_entry_changed($kind, $entry) });
-	$w->signal_connect(key_press_event => sub {
-	    my ($w, $e) = @_;
-	    $e->{state} & 4 or return; 
-	    my $c = chr $e->{keyval};
-
-	    foreach my $s (diskdrake::interactive::part_possible_actions($in, kind2hd($kind), $entry, $all_hds)) {
-		${{
-		    Create => 'c', Delete => 'd', Format => 'f', 
-		    Loopback => 'l', Resize => 'r', Type => 't', 
-		    Mount => 'M', Unmount => 'u', 'Mount point' => 'm',
-		    'Add to LVM' => 'L', 'Remove from LVM' => 'L', 
-		    'Add to RAID' => 'R', 'Remove from RAID' => 'R',
-		}}{$s} eq $c or next;
-
-		try($s, kind2hd($kind), $entry);
-		last;
-	    }
-	});
-	$w->set_name("PART_" . type2name($entry->{type}));
-	$w->set_usize($entry->{size} * $ratio + $minwidth, 0);
-	gtkpack__($kind->{display_box}, $w);
-	$w->grab_focus if $current_entry && fsedit::is_same_part($current_entry, $entry);
-    }
-}
-
-
-################################################################################
-# disks: helpers
-################################################################################
-sub current_hd { 
-    $current_kind->{type} eq 'hd' or die 'current_hd called but $current_kind is not an hd';
-    $current_kind->{val};
-}
-sub current_part {
-    current_hd();
-    $current_entry;
-}
-
-sub kind2hd {
-    my ($kind) = @_;
-    $kind->{type} =~ /hd|lvm/ ? $kind->{val} : {}
-}
-
-sub hd2kind {
-    my ($hd) = @_;
-    { type => 'hd', name => $hd->{device}, val => $hd };
-}
-
-sub filesystems_button_box() {
-    my @types = (__("Ext2"), __("Journalised FS"), __("Swap"), arch() =~ /sparc/ ? __("SunOS") : arch() eq "ppc" ? __("HFS") : __("FAT"),
-		 __("Other"), __("Empty"));
-    my %name2type = (Ext2 => 0x83, 'Journalised FS' => 0x483, Swap => 0x82, Other => 1, FAT => 0xb, HFS => 0x402);
-
-    gtkpack(new Gtk::HBox(0,0), 
-	    _("Filesystem types:"),
-	    map { my $w = new Gtk::Button(translate($_));
-		  my $t = $name2type{$_};
-		  $w->signal_connect(clicked => sub { try_('', \&createOrChangeType, $t, current_hd(), current_part()) });
-		  $w->can_focus(0);
-		  $w->set_name($_); 
-		  $w;
-	    } @types);
-}
-
-sub createOrChangeType {
-    my ($in, $type, $hd, $part, $all_hds) = @_;
-
-    $part ||= !fsedit::get_fstab($hd) && 
-              { type => 0, start => 1, size => $hd->{totalsectors} - 1 };
-    $part or return;
-    if ($type == 1) {
-	$in->ask_warn('', _("Use ``%s'' instead", $part->{type} ? _("Type") : _("Create")));
-    } elsif (!$type) {
-	$in->ask_warn('', _("Use ``%s'' instead", _("Delete"))) if $part->{type};
-    } elsif ($part->{type}) {
-	return unless $::expert;
-	return if $type == $part->{type};
-	isBusy($part) and $in->ask_warn('', _("Use ``Unmount'' first")), return;
-	diskdrake::interactive::ask_alldatawillbelost($in, $part, __("After changing type of partition %s, all data on this partition will be lost")) or return;
-	diskdrake::interactive::check_type($in, $type, $hd, $part) and fsedit::change_type($type, $hd, $part);
-    } else {
-	$part->{type} = $type;
-	diskdrake::interactive::Create($in, $hd, $part, $all_hds);
-    }
-}
-
-################################################################################
-# lvms: helpers
-################################################################################
-sub lvm2kind {
-    my ($lvm) = @_;
-    { type => 'lvm', name => $lvm->{LVMname}, val => $lvm };
-}
-
-################################################################################
-# raids: helpers
-################################################################################
-sub raid2kind {
-    { type => 'raid', name => 'raid', val => $all_hds->{raids} };
-}
-
-################################################################################
-# loopbacks: helpers
-################################################################################
-sub loopback2kind {
-    { type => 'loopback', name => 'loopback', val => $all_hds->{loopbacks} };
-}
-
-1;
diff --git a/perl-install/diskdrake/interactive.pm b/perl-install/diskdrake/interactive.pm
deleted file mode 100644
index 1b62cdc47..000000000
--- a/perl-install/diskdrake/interactive.pm
+++ /dev/null
@@ -1,1171 +0,0 @@
-package diskdrake::interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use run_program;
-use loopback;
-use devices;
-use fsedit;
-use raid;
-use any;
-use log;
-use fs;
-
-
-=begin
-
-struct part {
-  int active            # one of { 0 | 0x80 }  x86 only, primary only
-  int start             # in sectors
-  int size              # in sectors
-  int type              # 0x82, 0x83, 0x6 ...
-  string device         # 'hda5', 'sdc1' ...
-  string rootDevice     # 'sda', 'hdc' ...
-  string real_mntpoint  # directly on real /, '/tmp/hdimage' ...
-  string mntpoint       # '/', '/usr' ...
-  string options        # 'defaults', 'noauto'
-  string device_windobe # 'C', 'D' ...
-  string encrypt_key    # [0-9A-Za-z./]{20,}
-  string comment        # comment to have in fstab
-
-  bool isMounted
-
-  bool isFormatted
-  bool notFormatted 
-    #  isFormatted                  means the device is formatted
-    # !isFormatted &&  notFormatted means the device is not formatted
-    # !isFormatted && !notFormatted means we don't know which state we're in
-
-  int raid          # for partitions of type isRawRAID and which isPartOfRAID, the raid device number
-  string lvm        # partition used as a PV for the VG with {lvm} as LVMname
-  loopback loopback[]   # loopback living on this partition
-
-  # internal
-  string real_device     # '/dev/loop0', '/dev/loop1' ...
-
-  # internal CHS (Cylinder/Head/Sector)
-  int start_cyl, start_head, start_sec, end_cyl, end_head, end_sec, 
-}
-
-struct part_allocate inherits part {
-  int maxsize        # in sectors (alike "size")
-  int ratio          # 
-  string hd          # 'hda', 'hdc'
-  string parts       # for creating raid partitions. eg: 'foo bar' where 'foo' and 'bar' are mntpoint
-}
-
-struct part_raid inherits part {
-  string chunk-size  # usually '64k'
-  string level       # one of { 0, 1, 4, 5, 'linear' }
-
-  part disks[]
-
-  # invalid: active, start, rootDevice, device_windobe?, CHS
-}
-
-struct part_loopback inherits part {
-  string loopback_file   # absolute file name which is relative to the partition
-  part loopback_device   # where the loopback file live
-
-  # device is special here: it is the absolute filename of the loopback file.
-
-  # invalid: active, start, rootDevice, device_windobe, CHS
-}
-
-struct part_lvm inherits part {
-  # invalid: active, start, device_windobe, CHS
-}
-
-
-struct partition_table_elem {
-  part normal[]     #
-  part extended     # the main/next extended
-  part raw[4]       # primary partitions
-}
-
-struct geom {
-  int heads 
-  int sectors
-  int cylinders
-  int totalcylinders # for SUN, forget it
-  int start          # always 0, forget it
-}
-
-struct hd {
-  int totalsectors      # size in sectors
-  string device         # 'hda', 'sdc' ...
-  string device_alias   # 'cdrom', 'floppy' ...
-  string media_type     # one of { 'hd', 'cdrom', 'fd', 'tape' }
-  string capacity       # contain of the strings of { 'burner', 'DVD' }
-  string info           # name of the hd, eg: 'QUANTUM ATLAS IV 9 WLS'
-
-  bool isDirty          # does it need to be written to the disk 
-  bool needKernelReread # must we tell the kernel to reread the partition table
-  bool hasBeenDirty     # for undo
-  bool rebootNeeded     # happens when a kernel reread failed
-  bool partitionsRenumbered # happens when you
-                            # - remove an extended partition which is not the last one
-                            # - add an extended partition which is the first extended partition
-  int bus, id
-  
-  partition_table_elem primary
-  partition_table_elem extended[]
-
-  geom geom
-
-  # internal
-  string prefix         # for some RAID arrays device=>c0d0 and prefix=>c0d0p
-  string file           # '/dev/hda' ...
-}
-
-struct hd_lvm inherits hd {
-  int PE_size           # block size (granularity, similar to cylinder size on x86)
-  string LVMname        # VG name
-
-  part_lvm disks[]
-
-  # invalid: bus, id, extended, geom
-}
-
-struct raw_hd inherits hd {
-  string type       # 0x82, 0x83, 'nfs', ...
-  string mntpoint   # '/', '/usr' ...
-  string options    # 'defaults', 'noauto'
-
-  # invalid: isDirty, needKernelReread, hasBeenDirty, rebootNeeded, primary, extended
-}
-
-struct all_hds {
-  hd hds[]
-  hd_lvm lvms[]
-  part_raid raids[]     # indexed by number: raids[$n]{device} is "md$n"
-  part_loopback loopbacks[]
-  raw_hd raw_hds[]
-  raw_hd nfss[]
-  raw_hd smbs[]
-  raw_hd special[]
-
-  # internal: if fstab_to_string($all_hds) eq current_fstab then no need to save
-  string current_fstab
-}
-
-
-=cut
-
-
-sub main {
-    my ($in, $all_hds) = @_;
-
-    if ($in->isa('interactive_gtk')) {
-	require diskdrake::hd_gtk;
-	goto &diskdrake::hd_gtk::main;
-    }
-
-    my ($current_part, $current_hd);
-    
-    while (1) {
-	my $choose_txt = $current_part ? __("Choose another partition") : __("Choose a partition");
-	my $parts_and_holes = [ fsedit::get_all_fstab_and_holes($all_hds) ];
-	my $choose_part = sub {
-	    $current_part = $in->ask_from_listf('diskdrake', translate($choose_txt), sub { format_part_info_short(fsedit::part2hd($_[0], $all_hds), $_[0]) }, $parts_and_holes, $current_part) || return;
-	    $current_hd = fsedit::part2hd($current_part, $all_hds);
-	};
-
-	$choose_part->() if !$current_part;
-	return if !$current_part;
-
-	my %actions = my @actions = (
-            if_($current_part, 
-          (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $current_hd, $current_part, $all_hds) } } part_possible_actions($in, $current_hd, $current_part, $all_hds)),
-		'____________________________' => sub {},
-            ),
-            if_(@$parts_and_holes > 1, $choose_txt => $choose_part),
-	    if_($current_hd,
-	  (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $current_hd, $all_hds) } } hd_possible_actions_interactive($in, $current_hd, $all_hds)),
-	    ), 
-	  (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $all_hds) } } general_possible_actions($in, $all_hds)),
-        );
-	my ($actions) = list2kv(@actions);
-	my $a;
-	if ($current_part) {
-	    $in->ask_from_({
-			    cancel => _("Exit"), 
-			    title => 'diskdrake',
-			    messages => format_part_info($current_hd, $current_part),
-			   },
-			   [ { val => \$a, list => $actions, format => \&translate, type => 'list', sort => 0, gtk => { use_boxradio => 0 } } ]) or last;
-	    $actions{$a}();
-	    $current_hd = $current_part = '' if !is_part_existing($current_part, $all_hds);	    
-	} else {
-	    $choose_part->();
-	}
-	partition_table::assign_device_numbers($_) foreach fsedit::all_hds($all_hds);
-    }
-    Done($in, $all_hds) or goto &main;
-}
-
-
-
-
-################################################################################
-# general actions
-################################################################################
-sub general_possible_actions {
-    __("Undo"), ($::expert ? __("Toggle to normal mode") : __("Toggle to expert mode"));
-}
-
-
-sub Undo {
-    my ($in, $all_hds) = @_;
-    fsedit::undo($all_hds);
-}
-
-sub Wizard {
-    $::o->{wizard} = 1;
-    goto &Done;
-}
-
-sub Done {
-    my ($in, $all_hds) = @_;
-    eval { raid::verify($all_hds->{raids}) };
-    if (my $err = $@) {
-	$::expert or die;
-	$in->ask_okcancel('', [ formatError($err), _("Continue anyway?")]) or return;
-    }
-    foreach (@{$all_hds->{hds}}) {
-	if (!write_partitions($in, $_)) {
-	    return if !$::isStandalone;
-	    $in->ask_yesorno(_("Quit without saving"), _("Quit without writing the partition table?"), 1) or return;
-	}
-    }
-    if (!$::isInstall) {
-	my $new = fs::fstab_to_string($all_hds);
-	if ($new ne $all_hds->{current_fstab} && $in->ask_yesorno('', _("Do you want to save /etc/fstab modifications"), 1)) {
-	    $all_hds->{current_fstab} = $new;
-	    fs::write_fstab($all_hds);
-	}
-    }
-    1;
-}
-
-################################################################################
-# per-hd actions
-################################################################################
-sub hd_possible_actions {
-    __("Clear all"), if_($::isInstall, __("Auto allocate")), __("More");
-}
-sub hd_possible_actions_interactive {
-    hd_possible_actions(), __("Hard drive information");
-}
-
-sub Clear_all {
-    my ($in, $hd, $all_hds) = @_;
-
-    my @parts = partition_table::get_normal_parts($hd);
-    foreach (@parts) {
-	RemoveFromLVM($in, $hd, $_, $all_hds) if isPartOfLVM($_);
-	RemoveFromRAID($in, $hd, $_, $all_hds) if isPartOfRAID($_);
-    }
-    if (isLVM($hd)) {
-	lvm::lv_delete($hd, $_) foreach @parts
-    } else {
-	partition_table_raw::zero_MBR_and_dirty($hd);
-    }
-}
-
-sub Auto_allocate {
-    my ($in, $hd, $all_hds) = @_;
-    my $suggestions = partitions_suggestions($in) or return;
-
-    my %all_hds_ = %$all_hds;
-    $all_hds_{hds} = [ sort { $a == $hd ? -1 : 1 } @{$all_hds->{hds}} ];
-
-    eval { fsedit::auto_allocate(\%all_hds_, $suggestions) };
-    if ($@) {
-	$@ =~ /partition table already full/ or die;
-
-	$in->ask_warn("", [ 
-			   _("All primary partitions are used"),
-			   _("I can't add any more partition"), 
-			   _("To have more partitions, please delete one to be able to create an extended partition"),
-			  ]);
-    }
-}
-
-sub More {
-    my ($in, $hd) = @_;
-
-    $in->ask_from('', '',
-	    [
-	     { val => _("Save partition table"),    clicked_may_quit => sub { SaveInFile($in, $hd);   1 } },
-	     { val => _("Restore partition table"), clicked_may_quit => sub { ReadFromFile($in, $hd); 1 } },
-	     { val => _("Rescue partition table"),  clicked_may_quit => sub { Rescuept($in, $hd);     1 } },
-	         if_($::isInstall, 
-	     { val => _("Reload partition table"), clicked => sub { 
-		   $::o->{all_hds} = fsedit::empty_all_hds();
-		   die "setstep doPartitionDisks\n" if $::setstep;
-	       } }),
-	         if_($::isInstall, 
-	     { text => _("Removable media automounting"), val => \$::o->{useSupermount}, type => 'bool' },
-		 ),
-	    ],
-    );
-}
-
-sub ReadFromFile {
-    my ($in, $hd) = @_;
-
-    my $file = $::isStandalone ? $in->ask_file(_("Select file")) : devices::make("fd0") or return;
-
-    eval {
-    catch_cdie { partition_table::load($hd, $file) }
-      sub {
-	  $@ =~ /bad totalsectors/ or return;
-	  $in->ask_yesorno('',
-_("The backup partition table has not the same size
-Still continue?"), 0);
-      };
-    };
-    if (my $err = $@) {
-    	$in->ask_warn(_("Error"), formatError($err));
-    }
-}
-
-sub SaveInFile {
-    my ($in, $hd) = @_;
-
-    my $file = $::isStandalone ?
-		 $in->ask_file(_("Select file")) :
-                 $in->ask_okcancel(_("Warning"),
-_("Insert a floppy in drive
-All data on this floppy will be lost"), 1) && devices::make(detect_devices::floppy()) or return;
-
-    eval { partition_table::save($hd, $file) };
-    if (my $err = $@) {
-    	$in->ask_warn(_("Error"), formatError($err));
-    }
-}
-
-sub Rescuept {
-    my ($in, $hd) = @_;
-    my $w = $in->wait_message('', _("Trying to rescue partition table"));
-    fsedit::rescuept($hd);
-}
-
-sub Hd_info {
-    my ($in, $hd) = @_;
-    $in->ask_warn('', [ _("Detailed information"), format_hd_info($hd) ]);
-}
-
-################################################################################
-# per-part actions
-################################################################################
-
-sub part_possible_actions {
-    my ($in, $hd, $part, $all_hds) = @_;
-    $part or return;
-
-    my %actions = my @l = (
-        __("Mount point")      => '($part->{real_mntpoint} && common::usingRamdisk()) || (!isBusy && !isSwap && !isNonMountable)',
-        __("Type")             => '!isBusy && $::expert',
-        __("Options")          => '$::expert',
-        __("Resize")	       => '!isBusy && !isSpecial || isLVM($hd) && isMounted && isThisFs("xfs", $part)',
-        __("Move")             => '!isBusy && !isSpecial && $::expert && 0', # disable for the moment
-        __("Format")           => '!isBusy && ($::expert || $::isStandalone)',
-        __("Mount")            => '!isBusy && (hasMntpoint || isSwap) && maybeFormatted && ($::expert || $::isStandalone)',
-        __("Add to RAID")      => '!isBusy && isRawRAID && !isSpecial',
-        __("Add to LVM")       => '!isBusy && isRawLVM',
-        __("Unmount")          => '!$part->{real_mntpoint} && isMounted',
-        __("Delete")	       => '!isBusy',
-        __("Remove from RAID") => 'isPartOfRAID',
-        __("Remove from LVM")  => 'isPartOfLVM',
-        __("Modify RAID")      => 'isPartOfRAID && !isMounted($all_hds->{raids}[$part->{raid}])',
-        __("Use for loopback") => '!$part->{real_mntpoint} && isMountableRW && !isSpecial && hasMntpoint && $::expert',
-    );
-    my ($actions_names) = list2kv(@l);
-    my %macros = (
-        hasMntpoint => '$part->{mntpoint}',
-        isPrimary => 'isPrimary($part, $hd)',
-    );
-    if ($part->{type} == 0) {
-	__("Create");
-    } else {
-        grep { 
-    	    my $cond = $actions{$_};
-    	    while (my ($k, $v) = each %macros) {
-    	        $cond =~ s/$k/qq(($v))/e;
-    	    }
-    	    $cond =~ s/(^|[^:\$]) \b ([a-z]\w{3,}) \b ($|[\s&\)])/$1 . $2 . '($part)' . $3/exg;
-    	    eval $cond;
-        } @$actions_names;
-    }
-}
-
-sub Create {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my ($def_start, $def_size, $max) = ($part->{start}, $part->{size}, $part->{start} + $part->{size});
-
-    $part->{maxsize} = $part->{size}; $part->{size} = 0;
-    if (!fsedit::suggest_part($part, $all_hds)) {
-	$part->{size} = $part->{maxsize};
-	$part->{type} ||= 0x483;
-    }
-
-    #- update adjustment for start and size, take into account the minimum partition size
-    #- including one less sector for start due to a capacity to increase the adjustement by
-    #- one.
-    my ($primaryOrExtended, $migrate_files);
-    my $type = type2name($part->{type});
-    my $mb_size = $part->{size} >> 11;
-    my $has_startsector = ($::expert || arch() !~ /i.86/) && !isLVM($hd);
-
-    my $w = $in->ask_from(_("Create a new partition"), '',
-        [
-           if_($has_startsector,
-         { label => _("Start sector: "), val => \$part->{start}, min => $def_start, max => ($max - min_partition_size($hd)), type => 'range' },
-           ),
-         { label => _("Size in MB: "), val => \$mb_size, min => min_partition_size($hd) >> 11, max => $def_size >> 11, type => 'range' },
-         { label => _("Filesystem type: "), val => \$type, list => [ partition_table::important_types() ], sort => 0 },
-         { label => _("Mount point: "), val => \$part->{mntpoint}, list => [ fsedit::suggestions_mntpoint($all_hds), '' ],
-           disabled => sub { my $p = { type => name2type($type) }; isSwap($p) || isNonMountable($p) }, type => 'combo', not_edit => 0,
-         },
-           if_($::expert && $hd->hasExtended,
-         { label => _("Preference: "), val => \$primaryOrExtended, list => [ '', "Extended", "Primary", if_($::expert, "Extended_0x85") ] },
-           ),
-        ], changed => sub {
-	    if ($part->{start} + ($mb_size << 11) > $max) {
-		if ($_[0] == 0) {
-		    # Start sector changed => restricting Size
-		    $mb_size = ($max - $part->{start}) >> 11; 
-		} else {
-		    # Size changed => restricting Start sector
-		    $part->{start} = $max - ($mb_size << 11); 
-		}
-	    }
-        }, complete => sub {
-	    $part->{size} = from_Mb($mb_size, min_partition_size($hd), $max - $part->{start}); #- need this to be able to get back the approximation of using MB
-	    $part->{type} = name2type($type);
-	    $part->{mntpoint} = '' if isNonMountable($part);
-	    $part->{mntpoint} = 'swap' if isSwap($part);
-	    fs::set_default_options($part);
-
-	    check($in, $hd, $part, $all_hds) or return 1;
-	    $migrate_files = need_migration($in, $part->{mntpoint}) or return 1;
-
-	    fsedit::add($hd, $part, $all_hds, { force => 1, primaryOrExtended => $primaryOrExtended });
-	    0;
-	},
-    ) or return;
-
-    warn_if_renumbered($in, $hd);
-
-    if ($migrate_files eq 'migrate') {
-	format_($in, $hd, $part, $all_hds) or return;
-	migrate_files($in, $hd, $part);
-	fs::mount_part($part);
-    }
-}
-
-sub Delete {
-    my ($in, $hd, $part, $all_hds) = @_;
-    if (isRAID($part)) {
-	raid::delete($all_hds->{raids}, $part);
-    } elsif (isLVM($hd)) {
-	lvm::lv_delete($hd, $part);
-    } elsif (isLoopback($part)) {
-	my $f = "$part->{loopback_device}{mntpoint}$part->{loopback_file}";
-	if (-e $f && $in->ask_yesorno('', _("Remove the loopback file?"))) {
-	    unlink $f;
-	}
-	my $l = $part->{loopback_device}{loopback};
-	@$l = grep { $_ != $part } @$l;
-	delete $part->{loopback_device}{loopback} if @$l == 0;
-	fsedit::recompute_loopbacks($all_hds);
-    } else {
-	if (arch() =~ /ppc/) {
-	    undef $partition_table_mac::bootstrap_part if (isAppleBootstrap($part) && ($part->{device} = $partition_table_mac::bootstrap_part));
-	}
-	partition_table::remove($hd, $part);
-	warn_if_renumbered($in, $hd);
-    }
-}
-
-sub Type {
-    my ($in, $hd, $part) = @_;
-
-    my $warn = sub { ask_alldatawillbelost($in, $part, __("After changing type of partition %s, all data on this partition will be lost")) };
-
-    #- for ext2, warn after choosing as ext2->ext3 can be achieved without loosing any data :)
-    isExt2($part) or $warn->() or return;
-
-    my $type_name = type2name($part->{type});
-    $in->ask_from(_("Change partition type"),
-		  _("Which filesystem do you want?"),
-		  [ { label => _("Type"), val => \$type_name, list => [ partition_table::important_types() ], sort => 0, not_edit => !$::expert } ]) or return;
-
-    my $type = $type_name && name2type($type_name);
-
-    if (isExt2($part) && isThisFs('ext3', { type => $type })) {
-	my $w = $in->wait_message('', _("Switching from ext2 to ext3"));
-	if (run_program::run("tune2fs", "-j", devices::make($part->{device}))) {
-	    $part->{type} = $type;
-	    $part->{isFormatted} = 1; #- assume that if tune2fs works, partition is formatted
-
-	    #- disable the fsck (don't do it together with -j in case -j fails?)
-	    fs::disable_forced_fsck($part->{device});	    
-	    return;
-	}
-    }
-    #- either we switch to non-ext3 or switching losslessly to ext3 failed
-    !isExt2($part) or $warn->() or return;
-
-    if (defined $type) {
-	check_type($in, $type, $hd, $part) and fsedit::change_type($type, $hd, $part);
-    }
-}
-
-sub Mount_point {
-    my ($in, $hd, $part, $all_hds) = @_;
-
-    my $migrate_files;
-    my $mntpoint = $part->{mntpoint} || do {
-	my $part_ = { %$part };
-	if (fsedit::suggest_part($part_, $all_hds)) {
-	    fsedit::has_mntpoint('/', $all_hds) || $part_->{mntpoint} eq '/boot' ? $part_->{mntpoint} : '/';
-	} else { '' }
-    };
-    $in->ask_from(
-        '',
-        isLoopback($part) ? _("Where do you want to mount loopback file %s?", $part->{loopback_file}) :
-			    _("Where do you want to mount device %s?", $part->{device}),
-	[ { label => _("Mount point"), val => \$mntpoint, 
-	    list => [ if_($mntpoint, $mntpoint), fsedit::suggestions_mntpoint($all_hds), '' ], 
-	    not_edit => !$::expert } ],
-	complete => sub {
-	    !isPartOfLoopback($part) || $mntpoint or $in->ask_warn('', 
-_("Can't unset mount point as this partition is used for loop back.
-Remove the loopback first")), return 1;
-	    $part->{mntpoint} eq $mntpoint || check_mntpoint($in, $mntpoint, $hd, $part, $all_hds) or return 1;
-    	    $migrate_files = need_migration($in, $mntpoint) or return 1;
-	    0;
-	}
-    ) or return;
-    $part->{mntpoint} = $mntpoint;
-
-    if ($migrate_files eq 'migrate') {
-	format_($in, $hd, $part, $all_hds) or return;
-	migrate_files($in, $hd, $part);
-	fs::mount_part($part);
-    }
-}
-sub Mount_point_raw_hd {
-    my ($in, $part, $all_hds, $propositions) = @_;
-
-    my $mntpoint = $part->{mntpoint};
-    $in->ask_from(
-        '',
-        _("Where do you want to mount device %s?", $part->{device}),
-	[ { label => _("Mount point"), val => \$mntpoint, 
-	    list => [ if_($mntpoint, $mntpoint), '', @$propositions ], 
-	    not_edit => 0 } ],
-	complete => sub {
-	    $part->{mntpoint} eq $mntpoint || check_mntpoint($in, $mntpoint, {}, $part, $all_hds) or return 1;
-	    0;
-	}
-    ) or return;
-    $part->{mntpoint} = $mntpoint;
-}
-
-sub Resize {
-    my ($in, $hd, $part) = @_;
-    my (%nice_resize, $block_count, $free_block, $block_size);
-    my ($min, $max) = (min_partition_size($hd), partition_table::next_start($hd, $part) - $part->{start});
-
-    if (maybeFormatted($part)) {
-	# here we may have a non-formatted or a formatted partition
-	# -> doing as if it was formatted
-
-	if (isFat($part)) {
-	    write_partitions($in, $hd) or return;
-	    #- try to resize without losing data
-	    my $w = $in->wait_message(_("Resizing"), _("Computing FAT filesystem bounds"));
-
-	    $nice_resize{fat} = resize_fat::main->new($part->{device}, devices::make($part->{device}));
-	    $min = max($min, $nice_resize{fat}->min_size);
-	    $max = min($max, $nice_resize{fat}->max_size);	    
-	} elsif (isExt2($part) || isThisFs('ext3', $part)) {
-	    write_partitions($in, $hd) or return;
-	    $nice_resize{ext2} = devices::make($part->{device});
-	    my $r = `dumpe2fs $nice_resize{ext2} 2>/dev/null`;
-	    $r =~ /Block count:\s*(\d+)/ and $block_count = $1;
-	    $r =~ /Free blocks:\s*(\d+)/ and $free_block = $1;
-	    $r =~ /Block size:\s*(\d+)/ and $block_size = $1;
-	    log::l("dumpe2fs $nice_resize{ext2} gives: Block_count=$block_count, Free_blocks=$free_block, Block_size=$block_size");
-	    if ($block_count && $free_block && $block_size) {
-		$min = max($min, ($block_count - $free_block) * $block_size / 512);
-		$max = min($max, $block_count * $block_size / 512);
-	    } else {
-		delete $nice_resize{ext2};
-	    }
-	} elsif (isThisFs("reiserfs", $part)) {
-	    write_partitions($in, $hd) or return;
-	    if (defined (my $free = fs::df($part))) {
-		$nice_resize{reiserfs} = 1;		  
-		$min = max($min, $free);
-	    }
-	} elsif (isThisFs('xfs', $part) && isLVM($hd) && $::isStandalone && isMounted($part)) {
-	    $min = $part->{size}; #- ensure the user can only increase
-	    $nice_resize{xfs} = 1;
-	}
-	#- make sure that even after normalizing the size to cylinder boundaries, the minimun will be saved,
-	#- this save at least a cylinder (less than 8Mb).
-	$min += partition_table_raw::cylinder_size($hd);
-	$min >= $max and return $in->ask_warn('', _("This partition is not resizeable"));
-
-	#- for these, we have tools to resize partition table
-	#- without losing data (or at least we hope so :-)
-	if (%nice_resize) {
-	    ask_alldatamaybelost($in, $part, __("All data on this partition should be backed-up")) or return;
-	} else {
-	    ask_alldatawillbelost($in, $part, __("After resizing partition %s, all data on this partition will be lost")) or return;
-	}
-    }
-
-    my $mb_size = $part->{size} >> 11;
-    $in->ask_from(_("Resize"), _("Choose the new size"), [ 
-		   { label => _("New size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
-		]) or return;
-
-
-    my $size = from_Mb($mb_size, $min, $max);
-    $part->{size} == $size and return;
-
-    my $oldsize = $part->{size};
-    $hd->{isDirty} = $hd->{needKernelReread} = 1;
-    $part->{size} = $size;
-    $hd->adjustEnd($part);
-
-    undef $@;
-    my $b = before_leaving { $@ and $part->{size} = $oldsize };
-    my $w = $in->wait_message(_("Resizing"), '');
-
-    if (isLVM($hd)) {
-	lvm::lv_resize($part, $oldsize) if $size > $oldsize;	
-    }
-
-    if ($nice_resize{fat}) {
-	local *log::l = sub { $w->set(join(' ', @_)) };
-	$nice_resize{fat}->resize($part->{size});
-    } elsif ($nice_resize{ext2}) {
-	my $s = int(($part->{size} << 9) / $block_size);
-	log::l("resize2fs $nice_resize{ext2} to size $s in block of $block_size bytes");
-	system "resize2fs", "-pf", $nice_resize{ext2}, $s;
-    } elsif ($nice_resize{reiserfs}) {
-	log::l("reiser resize to $part->{size} sectors");
-	install_any::check_prog ("resize_reiserfs") if $::isInstall;
-	system "resize_reiserfs", "-f", "-q", "-s" . $part->{size}/2 . "K", devices::make($part->{device});
-    } elsif ($nice_resize{xfs}) {
-	system "xfs_growfs", $part->{mntpoint};
-    }
-
-    if (%nice_resize) {
-	$part->{isFormatted} = 1;
-    } else {
-	$part->{notFormatted} = 1;
-	$part->{isFormatted} = 0;
-	partition_table::verifyParts($hd);
-    }
-
-    if (isLVM($hd)) {
-	lvm::lv_resize($part, $oldsize) if $size < $oldsize;
-    } else {
-	partition_table::adjust_local_extended($hd, $part);
-	partition_table::adjust_main_extended($hd);
-    }
-}
-sub Move {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $hd2 = $in->ask_from_listf(_("Move"),
-				  _("Which disk do you want to move it to?"), \&partition_table::description, @{$all_hds->{hds}}) or return;
-    my $start2 = $in->ask_from_entry(_("Sector"),
-				     _("Which sector do you want to move it to?"));
-    defined $start2 or return;
-
-    my $w = $in->wait_message(_("Moving"), _("Moving partition..."));
-    fsedit::move($hd, $part, $hd2, $start2);
-}
-sub Format {
-    my ($in, $hd, $part, $all_hds) = @_;
-    format_($in, $hd, $part, $all_hds);
-}
-sub Mount {
-    my ($in, $hd, $part) = @_;
-    write_partitions($in, $hd) or return;
-    fs::mount_part($part);
-}
-sub Add2RAID {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $raids = $all_hds->{raids};
-
-    local $_ = @$raids == () ? "new" :
-      $in->ask_from_list_('', _("Choose an existing RAID to add to"),
-			  [ (grep {$_} map_index { $_ && "md$::i" } @$raids), __("new") ]) or return;
-
-    if (/new/) {
-	my $nb1 = raid::new($raids, $part);
-	defined modifyRAID($in, $raids, $nb1) or return raid::delete($raids, $nb1);
-    } else {
-	raid::add($raids, $part, $_);
-    }
-    raid::update(@$raids);
-}
-sub Add2LVM {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $lvms = $all_hds->{lvms};
-    write_partitions($in, $_) or return foreach isRAID($part) ? @{$all_hds->{hds}} : $hd;
-
-    my $lvm = $in->ask_from_listf_('', _("Choose an existing LVM to add to"),
-				  sub { ref $_[0] ? $_[0]{LVMname} : $_[0] },
-				  [ @$lvms, __("new") ]) or return;
-    if (!ref $lvm) {
-	# create new lvm
-	my $name = $in->ask_from_entry('', _("LVM name?")) or return;
-	$name =~ s/\W/_/g;
-	$name = substr($name, 0, 63); # max length must be < NAME_LEN / 2  where NAME_LEN is 128
-	$lvm = bless { disks => [], LVMname => $name }, 'lvm';
-	push @$lvms, $lvm;
-    }
-    $part->{lvm} = $lvm->{LVMname};
-    push @{$lvm->{disks}}, $part;
-    delete $part->{mntpoint};
-
-    require lvm;
-    lvm::check($in) if $::isStandalone;
-    lvm::vg_add($part);
-    lvm::update_size($lvm);
-}
-sub Unmount {
-    my ($in, $hd, $part) = @_;
-    fs::umount_part($part);
-}
-sub RemoveFromRAID { 
-    my ($in, $hd, $part, $all_hds) = @_;
-    raid::removeDisk($all_hds->{raids}, $part);
-}
-sub RemoveFromLVM {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $lvms = $all_hds->{lvms};
-    isPartOfLVM($part) or die;
-    my ($lvm) = grep { $_->{LVMname} eq $part->{lvm} } @$lvms;
-    lvm::vg_destroy($lvm);
-    @$lvms = grep { $_ != $lvm } @$lvms;
-}
-sub ModifyRAID { 
-    my ($in, $hd, $part, $all_hds) = @_;
-    modifyRAID($in, $all_hds->{raids}, $part->{raid});
-}
-sub Loopback {
-    my ($in, $hd, $real_part, $all_hds) = @_;
-
-    write_partitions($in, $hd) or return;
-
-    my $handle = any::inspect($real_part) or $in->ask_warn('', _("This partition can't be used for loopback")), return;
-
-    my ($min, $max) = (1, loopback::getFree($handle->{dir}, $real_part)); 
-    my $part = { maxsize => $max, size => 0, loopback_device => $real_part, notFormatted => 1 };
-    if (!fsedit::suggest_part($part, $all_hds)) {
-	$part->{size} = $part->{maxsize};
-	$part->{type} ||= 0x483;
-    }
-    delete $part->{mntpoint}; # we don't want the suggested mntpoint
-
-    my $type = type2name($part->{type});
-    my $mb_size = $part->{size} >> 11;
-    $in->ask_from(_("Loopback"), '', [
-		  { label => _("Loopback file name: "), val => \$part->{loopback_file} },
-		  { label => _("Size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
-		  { label => _("Filesystem type: "), val => \$type, list => [ partition_table::important_types() ], not_edit => !$::expert, sort => 0 },
-             ],
-	     complete => sub {
-		 $part->{loopback_file} or $in->ask_warn('', _("Give a file name")), return 1, 0;
-		 $part->{loopback_file} =~ s|^([^/])|/$1|;
-		 if (my $size = loopback::verifFile($handle->{dir}, $part->{loopback_file}, $real_part)) {
-		     $size == -1 and $in->ask_warn('', _("File already used by another loopback, choose another one")), return 1, 0;
-		     $in->ask_yesorno('', _("File already exists. Use it?")) or return 1, 0;
-		     delete $part->{notFormatted};
-		     $part->{size} = divide($size, 512);
-		 } else {
-		     $part->{size} = from_Mb($mb_size, $min, $max);
-		 }
-		 0;
-	     }) or return;
-    $part->{type} = name2type($type);
-    push @{$real_part->{loopback}}, $part;
-    fsedit::recompute_loopbacks($all_hds);
-}
-
-sub Options {
-    my ($in, $hd, $part, $all_hds) = @_;
-
-    my @simple_options = qw(user noauto supermount);
-
-    my (undef, $user_implies) = fs::mount_options();
-    my ($options, $unknown) = fs::mount_options_unpack($part);
-    my %help = fs::mount_options_help(keys %$options);
-
-    my $prev_user = $options->{user};
-    $in->ask_from(_("Mount options"),
-		  '',
-		  [ 
-		   (map {; 
-			 { label => $_, text => scalar warp_text(formatAlaTeX($help{$_})), val => \$options->{$_}, 
-			   advanced => !$part->{rootDevice} && !member($_, @simple_options), if_(!/=$/, type => 'bool'), }
-		     } keys %$options),
-		    { label => _("Various"), val => \$unknown, advanced => 1 },
-		  ],
-		  changed => sub {
-		      if ($prev_user != $options->{user}) {
-			  $prev_user = $options->{user};
-			  $options->{$_} = $options->{user} foreach @$user_implies;
-		      }
-		      if ($options->{encrypted}) {
-			  # modify $part->{options} for the check
-			  local $part->{options};
-			  fs::mount_options_pack($part, $options, $unknown);
-			  if (!check($in, $hd, $part, $all_hds)) {
-			      $options->{encrypted} = 0;
-			  } elsif (!$part->{encrypt_key} && !isSwap($part)) {
-			      if (my $encrypt_key = choose_encrypt_key($in)) {
-				  $options->{'encryption='} = 'AES128';
-				  $part->{encrypt_key} = $encrypt_key;
-			      } else {
-				  $options->{encrypted} = 0;
-			      }
-			  }
-		      } else {
-			  delete $options->{'encryption='};
-			  delete $part->{encrypt_key};
-		      }
-		  },
-		 ) or return;
-
-    fs::mount_options_pack($part, $options, $unknown);
-}
-
-
-{ 
-    no strict; 
-    *{"Toggle to normal mode"} = sub { $::expert = 0 };
-    *{"Toggle to expert mode"} = sub { $::expert = 1 };
-    *{"Clear all"} = *Clear_all;
-    *{"Auto allocate"} = *Auto_allocate;
-    *{"Mount point"} = *Mount_point;
-    *{"Modify RAID"} = *ModifyRAID;
-    *{"Add to RAID"} = *Add2RAID;
-    *{"Remove from RAID"} = *RemoveFromRAID; 
-    *{"Add to LVM"} = *Add2LVM;
-    *{"Remove from LVM"} = *RemoveFromLVM; 
-    *{"Use for loopback"} = *Loopback;
-    *{"Hard drive information"} = *Hd_info;
-}
-
-
-################################################################################
-# helpers
-################################################################################
-
-sub is_part_existing {
-    my ($part, $all_hds) = @_;
-    $part && grep { fsedit::is_same_part($part, $_) } fsedit::get_all_fstab_and_holes($all_hds);
-}
-
-sub modifyRAID {
-    my ($in, $raids, $nb) = @_;
-    my $md = "md$nb";
-    $in->ask_from('', '',
-		  [
-{ label => _("device"), val => \$md, list => [ map { "md$_" } grep { $nb == $_ || !$raids->[$_] } 0..8 ] },
-{ label => _("level"), val => \$raids->[$nb]{level}, list => [ qw(0 1 4 5 linear) ] },
-{ label => _("chunk size"), val => \$raids->[$nb]{'chunk-size'} },
-		  ],
-		 ) or return;
-    raid::updateSize($raids->[$nb]); # changing the raid level changes the size available
-    raid::changeNb($raids, $nb, first($md =~ /(\d+)/));
-}
-
-
-sub ask_alldatamaybelost {
-    my ($in, $part, $msg) = @_;
-
-    maybeFormatted($part) or return 1;
-
-    #- here we may have a non-formatted or a formatted partition
-    #- -> doing as if it was formatted
-    $in->ask_okcancel(_("Read carefully!"), [ _("Be careful: this operation is dangerous."), _($msg, $part->{device}) ], 1);
-}
-sub ask_alldatawillbelost {
-    my ($in, $part, $msg) = @_;
-
-    maybeFormatted($part) or return 1;
-
-    #- here we may have a non-formatted or a formatted partition
-    #- -> doing as if it was formatted
-    $in->ask_okcancel(_("Read carefully!"), _($msg, $part->{device}), 1);
-}
-
-sub partitions_suggestions {
-    my ($in) = @_;
-    my $t = $::expert ? 
-      $in->ask_from_list_('', _("What type of partitioning?"), [ keys %fsedit::suggestions ]) :
-      'simple';
-    $fsedit::suggestions{$t};
-}
-
-sub check_type {
-    my ($in, $type, $hd, $part) = @_;
-    eval { fsedit::check_type($type, $hd, $part) };
-    if (my $err = $@) {
-	$in->ask_warn('', $err);
-	return;
-    }
-    if ($::isStandalone) {
-	if (my $pkg = fsedit::package_needed_for_partition_type({ type => $type })) {
-	    my $fs = type2fs({ type => $type });
-	    if (!-x "/sbin/mkfs.$fs") {
-		$in->ask_yesorno('', _("The package %s is needed. Install it?", $pkg), 1) or return;
-		$in->do_pkgs->install($pkg);
-	    }
-	    -x "/sbin/mkfs.$fs" or $in->ask_warn('', "Mandatory package $pkg is missing"), return;
-	}
-    }
-    1;
-}
-sub check_mntpoint {
-    my ($in, $mntpoint, $hd, $part, $all_hds) = @_;
-    eval { fsedit::check_mntpoint($mntpoint, $hd, $part, $all_hds) };
-    local $_ = $@;
-    if (m|/boot ending on cylinder > 1024|) {
-	$in->ask_warn('',
-_("Sorry I won't accept to create /boot so far onto the drive (on a cylinder > 1024).
-Either you use LILO and it won't work, or you don't use LILO and you don't need /boot"));
-    } elsif (m|/ ending on cylinder > 1024|) {
-	$in->ask_warn('',
-_("The partition you've selected to add as root (/) is physically located beyond
-the 1024th cylinder of the hard drive, and you have no /boot partition.
-If you plan to use the LILO boot manager, be careful to add a /boot partition"));
-	undef $_;
-    } elsif (m|raid / with no /boot|) {
-	$in->ask_warn('',
-_("You've selected a software RAID partition as root (/).
-No bootloader is able to handle this without a /boot partition.
-So be careful to add a /boot partition"));
-	undef $_;
-    } elsif ($_) {
-	$in->ask_warn('', formatError($_));
-    }
-    !$_;
-}
-sub check {
-    my ($in, $hd, $part, $all_hds) = @_;
-    check_type($in, $part->{type}, $hd, $part) &&
-      check_mntpoint($in, $part->{mntpoint}, $hd, $part, $all_hds);
-}
-
-sub write_partitions {
-    my ($in, $hd) = @_;
-    $hd->{isDirty} or return 1;
-    isLVM($hd) and return 1;
-
-    $in->ask_okcancel(_("Read carefully!"), _("Partition table of drive %s is going to be written to disk!", $hd->{device}), 1) or return;
-    if (!$::testing) {
-	partition_table::write($hd);
-    }
-    $hd->{rebootNeeded} and die _("You'll need to reboot before the modification can take place");
-    1;
-}
-
-sub unmount {
-    my ($hd, $part) = @_;
-    fs::umount_part($part);
-}
-sub format_ {
-    my ($in, $hd, $part, $all_hds) = @_;
-    write_partitions($in, $_) or return foreach isRAID($part) ? @{$all_hds->{hds}} : $hd;
-    ask_alldatawillbelost($in, $part, __("After formatting partition %s, all data on this partition will be lost")) or return;
-    $part->{isFormatted} = 0; #- force format;
-    my $w = $in->wait_message(_("Formatting"), 
-			      isLoopback($part) ? _("Formatting loopback file %s", $part->{loopback_file}) :
-			                          _("Formatting partition %s", $part->{device}));
-    fs::format_part($all_hds->{raids}, $part);
-    1;
-}
-
-sub need_migration {
-    my ($in, $mntpoint) = @_;
-
-    my @l = grep { $_ ne "lost+found" } all($mntpoint);
-    if (@l && $::isStandalone) {
-	my $choice;
-	my @choices = (__("Move files to the new partition"), __("Hide files"));
-	$in->ask_from('', _("Directory %s already contains data\n(%s)", $mntpoint, formatList(5, @l)), 
-		      [ { val => \$choice, list => \@choices, type => 'list' } ]) or return;
-	$choice eq $choices[0] ? 'migrate' : 'hide';
-    } else {
-	'hide';
-    }    
-}
-
-sub migrate_files {
-    my ($in, $hd, $part, $all_hds) = @_;
-
-    my $wait = $in->wait_message('', _("Moving files to the new partition"));
-    my $handle = any::inspect($part, '', 'rw');
-    my @l = glob_("$part->{mntpoint}/*");
-    foreach (@l) {
-	$wait->set(_("Copying %s", $_)); 
-	system("cp", "-a", $_, $handle->{dir});
-    }
-    foreach (@l) {
-	$wait->set(_("Removing %s", $_)); 
-	system("rm", "-rf", $_);
-    }
-}
-
-sub warn_if_renumbered {
-    my ($in, $hd) = @_;
-    my $l = delete $hd->{partitionsRenumbered};
-    return if is_empty_array_ref($l);
-
-    my @l = map { _("partition %s is now known as %s", @$_) } @$l;
-    $in->ask_warn('', join("\n", 'Partitions have been renumbered: ', @l));
-}
-
-#- unit of $mb is mega bytes, min and max are in sectors, this
-#- function is used to convert back to sectors count the size of
-#- a partition ($mb) given from the interface (on Resize or Create).
-#- modified to take into account a true bounding with min and max.
-sub from_Mb {
-    my ($mb, $min, $max) = @_;
-    $mb <= $min >> 11 and return $min;
-    $mb >= $max >> 11 and return $max;
-    $mb * 2048;
-}
-
-sub format_part_info {
-    my ($hd, $part) = @_;
-
-    my $info = '';
-
-    $info .= _("Mount point: ") . "$part->{mntpoint}\n" if $part->{mntpoint};
-    $info .= _("Device: ") . "$part->{device}\n" if $part->{device} && !isLoopback($part);
-    $info .= _("DOS drive letter: %s (just a guess)\n", $part->{device_windobe}) if $part->{device_windobe};
-    if (arch() eq "ppc") {
-      my $new_value = $part->{pType};
-      $new_value =~ s/[^A-Za-z0-9_]//g;
-      $info .= _("Type: ") . $new_value . ($::expert ? sprintf " (0x%x)", $part->{type} : '') . "\n";
-      if (defined $part->{pName}) {
-      	$new_value = $part->{pName};
-      	$new_value =~ s/[^A-Za-z0-9_]//g;
-      	$info .= _("Name: ") . $new_value . "\n";
-      }
-    } elsif ($part->{type}) {
-	my $type = substr(type2name($part->{type}), 0, 40); # limit the length
-	$info .= _("Type: ") . $type . ($::expert ? sprintf " (0x%x)", $part->{type} : '') . "\n";
-    } else {
-	$info .= _("Empty") . "\n";
-    }
-    $info .= _("Start: sector %s\n", $part->{start}) if $::expert && !isSpecial($part);
-    $info .= _("Size: %s", formatXiB($part->{size}, 512));
-    $info .= sprintf " (%s%%)", int 100 * $part->{size} / $hd->{totalsectors} if $hd->{totalsectors};
-    $info .= _(", %s sectors", $part->{size}) if $::expert;
-    $info .= "\n";
-    $info .= _("Cylinder %d to %d\n", $part->{start} / $hd->cylinder_size(), ($part->{start} + $part->{size} - 1) / $hd->cylinder_size()) if ($::expert || !$part->{type}) && !isSpecial($part);
-    $info .= _("Formatted\n") if $part->{isFormatted};
-    $info .= _("Not formatted\n") if !$part->{isFormatted} && $part->{notFormatted};
-    $info .= _("Mounted\n") if $part->{isMounted};
-    $info .= _("RAID md%s\n", $part->{raid}) if isPartOfRAID($part);
-    $info .= sprintf "LVM %s\n", $part->{lvm} if isPartOfLVM($part);
-    $info .= _("Loopback file(s):\n   %s\n", join(", ", map { $_->{loopback_file} } @{$part->{loopback}})) if isPartOfLoopback($part);
-    $info .= _("Partition booted by default\n    (for MS-DOS boot, not for lilo)\n") if $part->{active} && $::expert;
-    if (isRAID($part)) {
-	$info .= _("Level %s\n", $part->{level});
-	$info .= _("Chunk size %s\n", $part->{'chunk-size'});
-	$info .= _("RAID-disks %s\n", join ", ", map { $_->{device} } @{$part->{disks}});
-    } elsif (isLoopback($part)) {
-	$info .= _("Loopback file name: %s", $part->{loopback_file});
-    }
-    if (isApple($part)) {
-	$info .= _("\nChances are, this partition is\na Driver partition, you should\nprobably leave it alone.\n");
-    }
-    if (isAppleBootstrap($part)) {
-	$info .= _("\nThis special Bootstrap\npartition is for\ndual-booting your system.\n");
-    }
-    # restrict the length of the lines
-    $info =~ s/(.{60}).*/$1.../mg;
-    $info;
-}
-
-sub format_part_info_short { 
-    my ($hd, $part) = @_;
-    $part->{type} ? 
-      partition_table::description($part) :
-      format_part_info($hd, $part);
-}
-
-sub format_hd_info {
-    my ($hd) = @_;
-
-    my $info = '';
-    $info .= _("Device: ") . "$hd->{device}\n";
-    $info .= _("Size: %s\n", formatXiB($hd->{totalsectors}, 512)) if $hd->{totalsectors};
-    $info .= _("Geometry: %s cylinders, %s heads, %s sectors\n", @{$hd->{geom}}{qw(cylinders heads sectors)}) if $::expert && $hd->{geom};
-    $info .= _("Info: ") . ($hd->{info} || $hd->{media_type}) . "\n" if $::expert && ($hd->{info} || $hd->{media_type});
-    $info .= _("LVM-disks %s\n", join ", ", map {$_->{device}} @{$hd->{disks}}) if isLVM($hd) && $hd->{disks};
-    $info .= _("Partition table type: %s\n", $1) if $::expert && ref($hd) =~ /_([^_]+)$/;
-    $info .= _("on bus %d id %d\n", $hd->{bus}, $hd->{id}) if $::expert && exists $hd->{bus};
-    $info;
-}
-
-sub format_raw_hd_info {
-    my ($raw_hd) = @_;
-
-    my $info = '';
-    $info .= _("Mount point: ") . "$raw_hd->{mntpoint}\n" if $raw_hd->{mntpoint};
-    $info .= format_hd_info($raw_hd);
-    if ($raw_hd->{type}) {
-	my $type = substr(type2name($raw_hd->{type}), 0, 40); # limit the length
-	$info .= _("Type: ") . $type . "\n";
-    }
-    $info .= _("Options: %s", $raw_hd->{options}) if $raw_hd->{options};
-    $info;
-}
-
-#- get the minimal size of partition in sectors to help diskdrake on
-#- limit cases, include a cylinder + start of a eventually following
-#- logical partition.
-sub min_partition_size { $_[0]->cylinder_size() + 2*$_[0]->{geom}{sectors} }
-
-
-sub choose_encrypt_key {
-    my ($in) = @_;
-
-    my ($encrypt_key, $encrypt_key2);
-    $in->ask_from_(
-		       {
-         title => _("Filesystem encryption key"), 
-	 messages => _("Choose your filesystem encryption key"),
-	 callbacks => { 
-	     complete => sub {
-		 length $encrypt_key < 20 and $in->ask_warn('', _("This encryption key is too simple (must be at least %d characters long)", 20)), return (1,0);
-		 $encrypt_key eq $encrypt_key2 or $in->ask_warn('', [ _("The encryption keys do not match"), _("Please try again") ]), return (1,1);
-		 return 0
-        } } }, [
-{ label => _("Encryption key"), val => \$encrypt_key,  hidden => 1 },
-{ label => _("Encryption key (again)"), val => \$encrypt_key2, hidden => 1 },
-    ]) && $encrypt_key;
-}
diff --git a/perl-install/diskdrake/removable.pm b/perl-install/diskdrake/removable.pm
deleted file mode 100644
index 58eb2b302..000000000
--- a/perl-install/diskdrake/removable.pm
+++ /dev/null
@@ -1,53 +0,0 @@
-package diskdrake::removable; # $Id$
-
-use diagnostics;
-use strict;
-use diskdrake::interactive;
-use common;
-use fsedit;
-use fs;
-
-sub main {
-    my ($in, $all_hds, $raw_hd) = @_;
-    my %actions = my @actions = actions();
-    my $action;
-    while ($action ne 'Done') {
-	$action = $in->ask_from_list_('', 
-					 diskdrake::interactive::format_raw_hd_info($raw_hd), 
-					 [ map { $_->[0] } group_by2 @actions ], 'Done') or return;
-	$actions{$action}->($in, $raw_hd, $all_hds);
-    }
-}
-
-sub actions {
-    (
-     __("Mount point") => \&mount_point,
-     __("Options") => \&options,
-     __("Type") => \&type,
-     __("Done") => \&done,
-    );
-}
-
-sub done {
-    my ($in, $raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Done($in, $all_hds);
-}
-sub options {
-    my ($in, $raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Options($in, {}, $raw_hd, $all_hds);
-}
-sub mount_point { 
-    my ($in, $raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Mount_point_raw_hd($in, $raw_hd, $all_hds, [ "/mnt/$raw_hd->{device}" ] );
-}
-sub type {
-    my ($in, $raw_hd) = @_;
-    my @fs = ('auto', fs::auto_fs());
-    my $type = $raw_hd->{type};
-    $in->ask_from(_("Change type"),
-			      _("Which filesystem do you want?"),
-			      [ { label => _("Type"), val => \$type, list => [@fs], not_edit => !$::expert } ]) or return;
-    $raw_hd->{type} = $type;
-}
-
-1;
diff --git a/perl-install/diskdrake/removable_gtk.pm b/perl-install/diskdrake/removable_gtk.pm
deleted file mode 100644
index da897b67a..000000000
--- a/perl-install/diskdrake/removable_gtk.pm
+++ /dev/null
@@ -1,31 +0,0 @@
-package diskdrake::removable_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use my_gtk qw(:helpers :wrappers :ask);
-
-
-sub per_entry_action_box {
-    my ($box, $kind, $entry) = @_;
-    $_->widget->destroy foreach $box->children;
-
-    if ($entry) {
-	my @l = (
-		 _("Mount point") => \&raw_hd_mount_point,
-		 _("Options") => \&raw_hd_options,
-		 _("Type") => \&removable_type,
-		);
-	@buttons = map_each {
-	    my ($txt, $f) = @_;
-	    gtksignal_connect(new Gtk::Button($txt), clicked => sub { try_('', $f, $entry) });
-	} group_by2 @l;
-
-	gtkadd($box, gtkadd(new Gtk::Frame(_("Choose action")),
-			    createScrolledWindow(gtkpack__(new Gtk::VBox(0,0), @buttons)))) if @buttons;
-	    
-    } else {
-	my $txt = _("Please click on a medium");
-	gtkpack($box, gtktext_insert(new Gtk::Text, $txt));
-    }
-}
diff --git a/perl-install/diskdrake/smbnfs_gtk.pm b/perl-install/diskdrake/smbnfs_gtk.pm
deleted file mode 100644
index 545d925fd..000000000
--- a/perl-install/diskdrake/smbnfs_gtk.pm
+++ /dev/null
@@ -1,266 +0,0 @@
-package diskdrake::smbnfs_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use any;
-use fs;
-use diskdrake::interactive;
-use common;
-use interactive;
-use network::smb;
-use network::nfs;
-use my_gtk qw(:helpers :wrappers :ask);
-
-my ($all_hds, $in, $tree, $current_entry, $current_leaf, %icons);
-
-sub main {
-    ($in, $all_hds, my $type) = @_;
-    my ($kind) = $type eq 'smb' ? smb2kind() : nfs2kind();
-    {
-	local $my_gtk::pop_it = 1;
-	$kind->check($in) or return;
-    }
-
-    my $w = my_gtk->new('DiskDrake');
-
-    add_smbnfs($w->{window}, $kind);
-    $w->{rwindow}->set_default_size(400, 300) if $w->{rwindow}->can('set_default_size');
-    $w->{window}->show_all;
-    $w->main;
-}
-
-################################################################################
-# nfs/smb: helpers
-################################################################################
-sub try {
-    my ($kind, $name, @args) = @_;
-    my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
-    try_($kind, $name, \&{$f}, @args);
-}
-sub try_ {
-    my ($kind, $name, $f, @args) = @_;
-    eval { $f->($in, @args, $all_hds); };
-    if (my $err = $@) {
-	$in->ask_warn(_("Error"), formatError($err));
-    }
-    update($kind);
-    Gtk->main_quit if member($name, 'Cancel', 'Done');
-}
-
-sub raw_hd_options {
-    my ($in, $raw_hd) = @_;
-    diskdrake::interactive::Options($in, {}, $raw_hd);
-}
-sub raw_hd_mount_point {
-    my ($in, $raw_hd) = @_;
-    my ($default) = $raw_hd->{device} =~ m|([^/]+)$|;
-    $default =~ s/\s+/-/g;
-    diskdrake::interactive::Mount_point_raw_hd($in, $raw_hd, $all_hds, [ "/mnt/$default" ]);
-}
-
-sub per_entry_info_box {
-    my ($box, $kind, $entry) = @_;
-    $_->isa('Gtk::Button') or $_->destroy foreach map { $_->widget } $box->children;
-    my $info;
-    if ($entry) {
-	$info = diskdrake::interactive::format_raw_hd_info($entry);
-    }
-    gtkpack($box, gtkadd(new Gtk::Frame(_("Details")), gtkset_justify(new Gtk::Label($info), 'left')));
-}
-
-sub per_entry_action_box {
-    my ($box, $kind, $entry) = @_;
-    $_->widget->destroy foreach $box->children;
-
-    my @buttons;
-
-    push @buttons, map {
-	  my $s = $_;
-	  gtksignal_connect(new Gtk::Button(translate($s)), clicked => sub { try($kind, $s, {}, $entry) });
-      } (if_($entry->{isMounted}, __("Unmount")),
-	 if_($entry->{mntpoint} && !$entry->{isMounted}, __("Mount"))) if $entry;
-
-    my @l = (
-	     if_($entry, __("Mount point") => \&raw_hd_mount_point),
-	     if_($entry && $entry->{mntpoint}, __("Options") => \&raw_hd_options),
-	     __("Cancel") => sub {},
-	     __("Done") => \&done,
-	    );
-    push @buttons, map {
-	my ($txt, $f) = @$_;
-	gtksignal_connect(new Gtk::Button(translate($txt)), clicked => sub { try_($kind, $txt, $f, $entry) });
-    } group_by2(@l);
-
-    gtkadd($box, gtkpack(new Gtk::HBox(0,0), @buttons));
-}
-
-sub done {
-    my ($in) = @_;
-    diskdrake::interactive::Done($in, $all_hds);
-}
-
-sub set_export_icon {
-    my ($entry, $w) = @_;
-    $entry ||= {};
-    my $icon = $icons{$entry->{isMounted} ? 'mounted' : $entry->{mntpoint} ? 'has_mntpoint' : 'default'};
-    my_gtk::ctree_set_icon($tree, $w, @$icon);
-}
-
-sub update {
-    my ($kind) = @_;
-    per_entry_action_box($kind->{action_box}, $kind, $current_entry);
-    per_entry_info_box($kind->{info_box}, $kind, $current_entry);
-    set_export_icon($current_entry, $current_leaf) if $current_entry;
-}
-
-sub find_fstab_entry {
-    my ($kind, $e, $add_or_not) = @_;
-
-    my $fs_entry = $kind->to_fstab_entry($e);
-
-    if (my ($fs_entry_) = grep { $fs_entry->{device} eq $_->{device} } @{$kind->{val}}) {
-	$fs_entry_;
-    } elsif ($add_or_not) {
-	push @{$kind->{val}}, $fs_entry;
-	$fs_entry;
-    } else {
-	undef;
-    }
-}
-
-sub import_ctree {
-    my ($kind, $info_box) = @_;
-    my (%servers_displayed, %wservers, %wexports, $inside);
-
-    $tree = Gtk::CTree->new(1, 0);
-    $tree->set_column_auto_resize(0, 1);
-    $tree->set_selection_mode('browse');
-    $tree->set_row_height($tree->style->font->ascent + $tree->style->font->descent + 1);
-
-    foreach ('default', 'server', 'has_mntpoint', 'mounted') {
-	$icons{$_} = [ gtkcreate_png("smbnfs_$_") ];
-    }
-
-    my $add_server = sub {
-	my ($server) = @_;
-	my $name = $server->{name} || $server->{ip};
-	$servers_displayed{$name} ||= do {
-	    my $w = $tree->insert_node(undef, undef, [$name], 5, (undef) x 4, 0, 0);
-	    my_gtk::ctree_set_icon($tree, $w, @{$icons{server}});
-	    $wservers{$w->{_gtk}} = $server;
-	    $w;
-	};
-    };
-
-    my $find_exports; $find_exports = sub {
-	my ($server) = @_;
-	my @l = eval { $kind->find_exports($server) };
-	return @l if !$@;
-
-	if ($server->{username}) {
-	    $in->ask_warn('', _("Can't login using username %s (bad password?)", $server->{username}));
-	    network::smb::remove_bad_credentials($server);
-	} else {
-	    if (my @l = network::smb::authentifications_available($server)) {
-		my $user = $in->ask_from_list_(_("Domain Authentication Required"),
-					       _("Which username"), [ @l, __("Another one") ]) or return;
-		if ($user ne 'Another one') {
-		    network::smb::read_credentials($server, $user);
-		    goto $find_exports;
-		}
-	    }
-	}
-
-	if ($in->ask_from(_("Domain Authentication Required"),
-		      _("Please enter your username, password and domain name to access this host."),
-		      [ 
-		       { label => _("Username"), val => \$server->{username} },
-		       { label => _("Password"), val => \$server->{password} },
-		       { label => _("Domain"), val => \$server->{domain} },
-		      ])) {
-	    goto $find_exports;
-	} else {
-	    delete $server->{username};
-	    ();
-	}	
-    };
-
-    my $add_exports = sub {
-	my ($node) = @_;
-	$tree->expand($node);
-	foreach ($find_exports->($wservers{$node->{_gtk}} || return)) { #- can't die here since insert_node provoque a tree_select_row before the %wservers is filled
-	    my $w = $tree->insert_node($node, undef, [$kind->to_string($_)], 5, (undef) x 4, 1, 0);
-	    set_export_icon(find_fstab_entry($kind, $_), $w);
-	    $wexports{$w->{_gtk}} = $_;
-	}
-    };
-
-    { 
-	my $search = new Gtk::Button(_("Search servers"));
-	gtkpack__($info_box, 
-		  gtksignal_connect($search,
-				    clicked => sub {
-					$add_server->($_) foreach sort { $a->{name} cmp $b->{name} } $kind->find_servers;
-					$search->destroy;
-				    }));
-    }
-
-    foreach (uniq(map { ($kind->from_dev($_->{device}))[0] } @{$kind->{val}})) {
-	my $node = $add_server->({ name => $_ });
-	$add_exports->($node);
-    }
-
-    $tree->signal_connect(tree_select_row => sub { 
-	my $curr = $_[1];
-	$inside and return;
-	$inside = 1;
-	if ($curr->row->is_leaf) {
-	    $current_leaf = $curr;
-	    $current_entry = find_fstab_entry($kind, $wexports{$curr->{_gtk}} || die(''), 'add');
-	} else {
-	    if (!$curr->row->children) {
-		gtkset_mousecursor_wait($tree->window);
-		my_gtk::flush();
-		$add_exports->($curr);		
-		gtkset_mousecursor_normal($tree->window);
-	    }
-	    $current_entry = undef;
-	}
-	update($kind);
-	$inside = 0;
-    });
-    $tree;
-}
-
-sub add_smbnfs {
-    my ($widget, $kind) = @_;
-    die if $kind->{main_box};
-
-    $kind->{info_box} = new Gtk::VBox(0,0);
-    $kind->{display_box} = createScrolledWindow(import_ctree($kind, $kind->{info_box}));
-    $kind->{action_box} = new Gtk::HBox(0,0);
-    $kind->{main_box} =
-      gtkpack_(new Gtk::VBox(0,7),
-	       1, gtkpack(new Gtk::HBox(0,7),
-			  gtkset_usize($kind->{display_box}, 200, 0),
-			  $kind->{info_box}),
-	       0, $kind->{action_box},
-	     );
-
-    $widget->add($kind->{main_box});
-    $current_entry = undef;
-    update($kind);
-    $kind;
-}
-
-sub nfs2kind {
-    network::nfs->new({ type => 'nfs', name => 'NFS', val => $all_hds->{nfss}, no_auto => 1 });
-}
-
-sub smb2kind {
-    network::smb->new({ type => 'smb', name => 'Samba', val => $all_hds->{smbs}, no_auto => 1 });
-}
-
-
-1;
diff --git a/perl-install/drakxtools.spec b/perl-install/drakxtools.spec
deleted file mode 100644
index d59cc4514..000000000
--- a/perl-install/drakxtools.spec
+++ /dev/null
@@ -1,1167 +0,0 @@
-Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
-Name:    drakxtools
-Version: 1.1.8
-Release: 3mdk
-Url: http://www.linux-mandrake.com/drakx/
-Source0: %name-%version.tar.bz2
-License: GPL
-Group: System/Configuration/Other
-Requires: %{name}-newt = %version-%release, perl-GTK >= 0.6123, perl-GTK-GdkImlib, XFree86-100dpi-fonts, XFree86-75dpi-fonts, /usr/X11R6/bin/xtest, detect-lst >= 0.9.72, font-tools, usermode >= 1.44-4mdk, perl-MDK-Common >= 1.0.2-13mdk, groff
-Conflicts: drakconf < 0.96-10mdk
-BuildRequires:        e2fsprogs-devel
-BuildRequires:        gcc
-BuildRequires:        gettext
-BuildRequires:        gtk+-devel
-BuildRequires:        ldetect-devel
-BuildRequires:        ncurses-devel
-BuildRequires:        newt-devel
-BuildRequires:        perl-devel
-BuildRoot: %_tmppath/%name-buildroot
-
-%package newt
-Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
-Group: System/Configuration/Other
-Requires: perl-base >= 5.600-29mdk, urpmi, modutils >= 2.3.11, ldetect-lst >= 0.1.2-32mdk, usermode-consoleonly >= 1.44-4mdk
-Obsoletes: diskdrake setuptool
-Obsoletes: Xconfigurator mouseconfig kbdconfig printtool 
-Provides: diskdrake setuptool Xconfigurator mouseconfig kbdconfig printtool
-
-%package http
-Summary: The drakxtools via http
-Group: System/Configuration/Other
-Requires: %{name}-newt = %version-%release, perl-Net_SSLeay, perl-Authen-PAM, perl-CGI
-
-%package -n harddrake
-Summary: Main Hardware Configuration/Information Tool
-Group: System/Configuration/Hardware
-Requires: %{name}-newt = %version-%release
-Obsoletes: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-Provides: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-
-%package -n harddrake-ui
-Summary: Main Hardware Configuration/Information Tool
-Group: System/Configuration/Hardware
-Requires: %name = %version-%release
-Obsoletes: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-Provides: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-
-%description
-Contains , diskdrake, drakautoinst, drakbackup, drakboot, drakfont, draknet,
-drakxtv, keyboarddrake, liveupdate, lspcidrake, mousedrake, printerdrake
-and XFdrake.
-
-diskdrake: The purpose of the DiskDrake project is to make hard disk
-partitioning easier. It is graphical, simple and powerful. Different
-skill levels are available (newbie, advanced user, expert). It's
-written entirely in Perl and Perl/Gtk. It uses resize_fat which is a
-perl rewrite of the work of Andrew Clausen (libresize).
-
-drakautoinst: help you configure an automatic installation replay
-
-drakbackup: backup and restore your system.
-
-drakboot: configures your boot configuration (Lilo/GRUB, Aurora, X, autologin)
-mousedrake: configures and autodetects your mouse
-
-drakfont: import some fonts in the system.
-
-draknet: LAN/Internet connection configuration. It handles ethernet,
-ISDN, DSL, cable, modem.
-
-drakxtv: auto configure tv card for xawtv grabber
-keyboarddrake: configures your keyboard (both console and X)
-
-liveupdate: live update software.
-
-lspcidrake: displays your pci information, *and* the corresponding
-kernel module.
-
-printerdrake: detects and configures your printer
-
-XFdrake: menu-driven program which walks you through setting up your X
-server. It works on console and under X :)
-It autodetects both monitor and video card if possible.
-
-
-%description newt
-This add the capability to be runned behind a web server to the drakx tools.
-See package %{name}
-
-%description http
-See package %{name}
-
-%description -n harddrake
-The harddrake service is a hardware probing tool run at system boot
-time to determine what hardware has been added or removed from the
-system.
-It then offer to run needed config tool to update the OS
-configuration.
-
-
-%description -n harddrake-ui
-This is the main configuration tool for hardware that calls all the
-other configuration tools.
-It offers a nice GUI that show the hardware configuration splitted by
-hardware classes.
-
-
-%prep
-%setup -q
-
-%build
-%make
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-%make PREFIX=$RPM_BUILD_ROOT install
-mkdir -p $RPM_BUILD_ROOT/{%_initrddir,etc/sysconfig/harddrake2}
-touch $RPM_BUILD_ROOT/etc/sysconfig/harddrake2/previous_hw
-
-mv ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor \
-   ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor.real
-ln -sf %{_bindir}/consolehelper ${RPM_BUILD_ROOT}%{_sbindir}/net_monitor
-mkdir -p ${RPM_BUILD_ROOT}%{_sysconfdir}/{pam.d,security/console.apps}
-cp pam.net_monitor $RPM_BUILD_ROOT%{_sysconfdir}/pam.d/net_monitor
-cp apps.net_monitor $RPM_BUILD_ROOT%{_sysconfdir}/security/console.apps/net_monitor
-
-dirs1="usr/lib/libDrakX usr/share/libDrakX"
-(cd $RPM_BUILD_ROOT ; find $dirs1 usr/bin usr/sbin ! -type d -printf "/%%p\n")|egrep -v 'bin/.*harddrake' > %{name}.list
-(cd $RPM_BUILD_ROOT ; find $dirs1 -type d -printf "%%%%dir /%%p\n") >> %{name}.list
-
-perl -ni -e '/gtk|icons|pixmaps|XFdrake|bootlook|drakbackup|drakfont|logdrake|net_monitor/ ? print STDERR $_ : print' %{name}.list 2> %{name}-gtk.list
-perl -ni -e '/http/ ? print STDERR $_ : print' %{name}.list 2> %{name}-http.list
-
-#mdk menu entry
-mkdir -p $RPM_BUILD_ROOT/%_menudir
-cat > $RPM_BUILD_ROOT%_menudir/harddrake-ui <<EOF
-?package(harddrake-ui):\
-	needs="X11"\
-	section="Configuration/Hardware"\
-	title="HardDrake"\
-	longtitle="Hardware Central Configuration/information tool"\
-	command="/usr/sbin/harddrake2"\
-	icon="harddrake.png"
-EOF
-%find_lang libDrakX
-cat libDrakX.lang >> %name.list
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-[[ ! -e /usr/X11R6/bin/Xconfigurator ]] && %__ln_s -f ../sbin/XFdrake /usr/X11R6/bin/Xconfigurator
-[[ ! -e %_sbindir/kbdconfig ]] && %__ln_s -f keyboarddrake %_sbindir/kbdconfig
-[[ ! -e %_sbindir/setuptool ]] && %__ln_s -f drakxconf %_sbindir/setuptool
-[[ ! -e %_sbindir/mouseconfig ]] && %__ln_s -f mousedrake %_sbindir/mouseconfig
-[[ ! -e %_bindir/printtool ]] && %__ln_s -f ../sbin/printerdrake %_bindir/printtool
-:
-
-%postun
-for i in /usr/X11R6/bin/Xconfigurator %_sbindir/kbdconfig %_sbindir/mouseconfig %_bindir/printtool;do
-    [[ -L $i ]] && %__rm -f $i
-done
-
-%post http
-%_post_service drakxtools_http
-
-%preun http
-%_preun_service drakxtools_http
-
-%post -n harddrake
-%_initrddir/harddrake start
-
-%post -n harddrake-ui
-%update_menus
-
-%postun -n harddrake-ui
-%clean_menus
-
-
-%files newt -f %name.list
-%defattr(-,root,root)
-%config(noreplace) /etc/security/fileshare.conf
-%doc diskdrake/diskdrake.html
-%attr(4755,root,root) %_sbindir/fileshareset
-
-%files -f %{name}-gtk.list
-%defattr(-,root,root)
-%config(noreplace) %_sysconfdir/pam.d/net_monitor
-%config(noreplace) %_sysconfdir/security/console.apps/net_monitor
-/usr/X11R6/bin/*
-
-%files -n harddrake
-%defattr(-,root,root)
-%config(noreplace) %_initrddir/harddrake
-%dir /etc/sysconfig/harddrake2/
-%config(noreplace) /etc/sysconfig/harddrake2/previous_hw
-
-%files -n harddrake-ui
-%defattr(-,root,root)
-%_sbindir/harddrake2
-%_datadir/pixmaps/harddrake2
-%_menudir/harddrake-ui
-
-%files http -f %{name}-http.list
-%defattr(-,root,root)
-%dir %{_sysconfdir}/drakxtools_http
-%config(noreplace) %_sysconfdir/pam.d/miniserv
-%config(noreplace) %_sysconfdir/init.d/drakxtools_http
-%config(noreplace) %_sysconfdir/drakxtools_http/conf
-%config(noreplace) %_sysconfdir/drakxtools_http/authorised_progs
-%config(noreplace) %_sysconfdir/logrotate.d/drakxtools-http
-
-%changelog 
-* Mon Jul  8 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-3mdk
-- harddrake2:
-	o no need to 'use strict' in "binary" => remove warnings 
-
-- spec:
-	o reorder entries in description
-	o list all entries in first line of description
-	o fix post: add start argument
-
-* Mon Jul 08 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-2mdk
-- spec :
-  o enhance descriptions
-  o various spec clean
-  o harddrake :
- 	* obsoletes/provides libdetect-lst, libdetect-lst-devel, detect,
-	  detect-lst, kudzu-devel
-	* split package between harddrake and harddrake-ui to minimize
-    	  the harddrake service dependancies
-	* add missing /etc/sysconfig/harddrake2
-- harddrake2 :
-  o cache detect_devices::probeall(1) so that hw probe is run once
-  o hw configuration :
-  	* eide devices: split up info field into vendor and model fields
-  o ui:
-	* enhanced help
-	* mice:
-		- s/nbuttons/Number of buttons/ 
-		- delete qw(MOUSETYPE XMOUSETYPE unsafe)
-	* complete help
-	* center the main window
-	* remove drakx decorations
-	* don't display "run config tool" button if no configurator
-	  availlable
-  o logic:
-	* skip configuration on firt run
-	* don't restart harddrake on install
-	* skip hw classes without configurator (which'll have a
-	  configurator after porting updfstab)
-  o service :
-	* only do the job at startup
-	* add "please wait" message
-	* really don't cry when no previous config
-
-* Mon Jul 08 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-1mdk
-- snapshot
-- new entries: 
-	o harddrake2 : new hardware detection && configuration tool
-	o drakbugreport: bug reporting tool a la Kde (not working!)
-	o drakTermServ : configuration tool for diskless stations.
-- updated programs :
-	o drakxtv: if runned by root, offer to configure bttv for most tv cards
-	o disdrake:
-		* enhanced raid & lvm support,
-		* check if programs (ie jfsprogs) are installed
-		* cleanups
-	o Xconfigurator: bug fix
-- general : better supermout support, use new libldetect, various bug fixes
-
-* Tue Jun 18 2002 Frederic Lepied <flepied@mandrakesoft.com> 1.1.7-99mdk
-- added new draksec from Christian and a new way to build the packages (make rpm)
-
-* Mon Apr 15 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.7-98mdk
-- snapshot
-- add drakxtv description
-- drakxtv : now auto guess the country and the freq table
-
-* Fri Mar 15 2002 dam's <damien@mandrakesoft.com> 1.1.7-97mdk
-- snapshot. final release 1
-
-* Tue Mar 12 2002 dam's <damien@mandrakesoft.com> 1.1.7-96mdk
-- added onboot options foreach network cards
-- resolv.conf and domain name bug fixed
-
-* Tue Mar 12 2002 dam's <damien@mandrakesoft.com> 1.1.7-95mdk
-- included drakproxy
-- corrected various timeout (net_monitor, internet connection tests)
-- snapshot
-
-* Mon Mar 11 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-94mdk
-- various
-
-* Fri Mar  8 2002 dam's <damien@mandrakesoft.com> 1.1.7-93mdk
-- drakfont GUI corrected
-- new drakproxy
-
-* Fri Mar 08 2002 François Pons <fpons@mandrakesoft.com> 1.1.7-92mdk
-- fixes for NVIDIA drivers support in XFdrake.
-
-* Thu Mar  7 2002 dam's <damien@mandrakesoft.com> 1.1.7-91mdk
-- lot of bugfixes
-- (dams)
-	* standalone/net_monitor: make gc happy
-	* modparm.pm, share/po/fr.po: corrected
-	* standalone/draknet: corrected network/internet restart when already
-	connected
-	* standalone/drakfont: corrected bad system command
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-- (gc)
-	* standalone/drakgw: 
-	  - call net_monitor to disable internet connection before
-	    network-restart
-	  - user return value when status'ing the
-	  initscripts rather than grepping their text output
-- (pixel)
-	* standalone/fileshareset (nfs_exports::update_server): ensure portmap
-	is running
-
-* Wed Mar  6 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-90mdk
-- corrected font in wizard (dams)
-- localedrake: (pixel)
-  * fix dummy entries in .i18n for chineese
-  * take sysconfig/i18n into account when no .i18n
-  * when called by kcontrol with --apply, don't modify kde config files,
-    kcontrol takes care of it more nicely
-- diskdrake: translate actions in text mode (pixel)
-- drakxtv fixed (titi)
-
-* Sun Mar  3 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-89mdk
-- (gtkicons_labels_widget): pass the widget instead of directly passing the font
-  (for drakconf)
-
-* Sun Mar  3 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-88mdk
-- (gtkicons_labels_widget): pass the style instead of directly passing the font
-  (for drakconf)
-
-* Fri Mar  1 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-87mdk
-- new snapshot (including a modified localedrake)
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-86mdk
-- corrected modinfo path. isa modules options should now work.
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-85mdk
-- corrected spec so that net_monitor.real get included too.
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-84mdk
-- snapshot
-
-* Wed Feb 27 2002 dam's <damien@mandrakesoft.com> 1.1.7-83mdk
-- snapshot
-
-* Tue Feb 26 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-82mdk
-- move XFdrake to drakxtools from drakxtools-newt 
-(otherwise it doesn't work, since it needs perl-GTK & xtest)
-
-* Tue Feb 26 2002 dam's <damien@mandrakesoft.com> 1.1.7-81mdk
-- added groff require
-
-* Tue Feb 26 2002 dam's <damien@mandrakesoft.com> 1.1.7-80mdk
-- isa card modules correction. Should work in post install
-- drakfont correction
-
-* Sat Feb 23 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-79mdk
-- require latest perl-MDK-Common
-- corrected icon paths (thanks to garrick)
-- don't create devices when /dev is devfs mounted (thanks to Andrej Borsenkow)
-
-* Fri Feb 22 2002 dam's <damien@mandrakesoft.com> 1.1.7-78mdk
-- corrected icon paths
-
-* Thu Feb 21 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-77mdk
-- now we can live without kdesu ; and drakxtools-newt only requires
-  usermode-consoleonly
-
-* Tue Feb 19 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-76mdk
-- fix diskdrake --nfs & --smb
-
-* Tue Feb 19 2002 dam's <damien@mandrakesoft.com> 1.1.7-75mdk
-- required specific version of perl MDK Common
-
-* Tue Feb 19 2002 dam's <damien@mandrakesoft.com> 1.1.7-74mdk
-- various things not described by the last packager
-- new png/wpm search policy in my_gtk
-
-* Mon Feb 18 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-73mdk
-- snapshot
-
-* Sat Feb 16 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-72mdk
-- localedrake now handles KDE
-- diskdrake now handles XFS on LVM live resizing (growing only)
-
-* Fri Feb 15 2002 dam's <damien@mandrakesoft.com> 1.1.7-71mdk
-- snapshot
-
-* Thu Feb 14 2002 dam's <damien@mandrakesoft.com> 1.1.7-70mdk
-- snapshot
-
-* Mon Feb 11 2002 dam's <damien@mandrakesoft.com> 1.1.7-69mdk
-- fixed bad stuff.so in drakxtools
-
-* Fri Feb  8 2002 dam's <damien@mandrakesoft.com> 1.1.7-68mdk
-- new gfx
-- various fix
-- major printerdrake updates
-
-* Thu Feb 07 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.7-67mdk
-- add drakxtv
-
-* Thu Feb  7 2002 dam's <damien@mandrakesoft.com> 1.1.7-66mdk
-- new package, various wizard, mygtk, disdrake improvment.
-
-* Wed Feb  6 2002 dam's <damien@mandrakesoft.com> 1.1.7-65mdk
-- logdrake updates
-- wizard fix
-
-* Tue Jan 29 2002 dam's <damien@mandrakesoft.com> 1.1.7-64mdk
-- last mygtk, drakbackup...
-- disdrake fixed
-- snapshot
-
-* Sun Jan 27 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-63mdk
-- cleanup drakxtools-newt (move all gtk stuff to drakxtools)
-- reworked and split diskdrake
-- add logdrake
-
-* Fri Jan 25 2002 dam's <damien@mandrakesoft.com> 1.1.7-62mdk
-- bug corrections, improvements
-- new advertising engine
-- new gtkicons_labels_widget
-
-* Tue Jan 22 2002 dam's <damien@mandrakesoft.com> 1.1.7-61mdk
-- new gtkicons_labels_widget for new mcc.
-
-* Fri Jan 18 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-60mdk
-- first support for 'Explanations'
-
-* Fri Jan 18 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-59mdk
-- Drakbackup without unstable options for qa. 
-- DrakFont update warning message (qa).
-
-* Wed Jan 16 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-58mdk
-- ensure lsnetdrake is included
-
-* Tue Jan 15 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-57mdk
-- Drakbackup daemon, backend mode (-show-conf -daemon -debug -help -version) and report mail corrections.
-- DrakFont gi and progress bar problems.
-
-* Tue Jan 14 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-56mdk
-- New drakbackup version, ftp backup work, new pixmaps.
-- DrakFont with new pixmaps. 
-
-* Mon Jan 14 2002 Stefan van der Eijk <stefan@eijk.nu> 1.1.7-55mdk
-- BuildRequires
-
-* Fri Jan 11 2002 dam's <damien@mandrakesoft.com> 1.1.7-54mdk
-- snapshot
-
-* Wed Jan  9 2002 dam's <damien@mandrakesoft.com> 1.1.7-53mdk
-- snapshot
-- new code in my_gtk
-
-* Tue Jan  8 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-52mdk
-- New drakbackup version, incremental backup and restore should work. 
-
-* Sat Dec 22 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-51mdk
-- fix  conflicts in drakbackup cvs version.
-
-* Sat Dec 22 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-50mdk
-- new drakbackup version.
-
-* Mon Dec 10 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-49mdk
-- fix drakfont path problem.
-- new version of drakbakup
-
-* Wed Dec  5 2001 dam's <damien@mandrakesoft.com> 1.1.7-48mdk
-- corrected syntax error
-
-* Tue Dec  4 2001 dam's <damien@mandrakesoft.com> 1.1.7-47mdk
-- avoid network test freeze
-- added drackbackup
-- snapshot
-
-* Fri Nov 30 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-46mdk
-- add diskdrake --fileshare
-
-* Thu Nov 29 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-45mdk
-- new diskdrake including fileshareset/filesharelist stuff
-
-* Mon Nov 26 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-44mdk
-- use the CVS, not my devel (instable) version
-
-* Fri Nov 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-43mdk
-- any.pm fixed
-
-* Mon Nov 19 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-42mdk
-- scannerdrake update to add dynamic support
-
-* Mon Nov 12 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-41mdk
-- scannerdrake update with new fat ScannerDB
-
-* Mon Nov  5 2001 dam's <damien@mandrakesoft.com> 1.1.7-40mdk
-- corrected typo in drakautoinst
-
-* Fri Nov  2 2001 dam's <damien@mandrakesoft.com> 1.1.7-39mdk
-- release
-
-* Fri Oct 26 2001 dam's <damien@mandrakesoft.com> 1.1.7-38mdk
-- drakautoinst & drakfont updated
-
-* Thu Oct 25 2001 dam's <damien@mandrakesoft.com> 1.1.7-37mdk
-- big improvement on drakautoinst
-- draknet : connection script updated 
-
-* Thu Oct 18 2001 dam's <damien@mandrakesoft.com> 1.1.7-36mdk
-- draknet/net_monitor corrected
-- corrected bad stuff.so
-
-* Tue Oct 16 2001 dam's <damien@mandrakesoft.com> 1.1.7-35mdk
-- make rplint happier
-
-* Wed Oct 10 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-34mdk
-- snapshot with scanner stuff
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-33mdk
-- snapshot
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-32mdk
-- Last translations.
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-31mdk
-- snapshot. draknet bugfix.
-
-* Sun Sep 23 2001 dam's <damien@mandrakesoft.com> 1.1.7-30mdk
-- snapshot. Included last printer and draknet corrections.
-
-* Fri Sep 21 2001 dam's <damien@mandrakesoft.com> 1.1.7-29mdk
-- typo in adsl.pm, Xconfigurator fix.
-
-* Thu Sep 20 2001 dam's <damien@mandrakesoft.com> 1.1.7-28mdk
-- snapshot. draknet works now. 
-
-* Wed Sep 19 2001 dam's <damien@mandrakesoft.com> 1.1.7-27mdk
-- snapshot
-
-* Mon Sep 17 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-26mdk
-- snapshot
-
-* Mon Sep 17 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-25mdk
-- snapshot
-
-* Sat Sep 15 2001 dam's <damien@mandrakesoft.com> 1.1.7-24mdk
-- snapshot with printer, draknet & install fixes
-
-* Fri Sep 14 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-23mdk
-- snapshot with latest XFdrake fixes.
-
-* Fri Sep 14 2001 dam's <damien@mandrakesoft.com> 1.1.7-22mdk
-- snapshot
-
-* Thu Sep 13 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-21mdk
-- fix Xinerama for Matrox cards (restore XFree86 4.1.0 without DRI).
-- removed Modeline 1024x768 in 97.6 Hz which troubles XF4 a lot.
-
-* Thu Sep 13 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-20mdk
-- snapshot with XFdrake fixes (G550 support, no DRI with Xinerama,
-  no XFree86 3.3.6 proposed wiht dual head).
-
-* Wed Sep 12 2001 dam's <damien@mandrakesoft.com> 1.1.7-19mdk
-- snapshot
-
-* Wed Sep 12 2001 dam's <damien@mandrakesoft.com> 1.1.7-18mdk
-- snapshot.
-
-* Mon Sep 10 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-17mdk
-- remove dependency on "perl" since pixel added Data::Dumper in perl-base
-
-* Mon Sep 10 2001 dam's <damien@mandrakesoft.com> 1.1.7-16mdk
-- new snapshot, bug corrections.
-
-* Thu Sep  6 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-15mdk
-- drakgw should be working now
-
-* Tue Sep 04 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-14mdk
-- snaphsot, better interaction with mcc (diskdrake printerdrake).
-
-* Tue Sep  4 2001 dam's <damien@mandrakesoft.com> 1.1.7-13mdk
-- snapshot.
-
-* Thu Aug 30 2001 dam's <damien@mandrakesoft.com> 1.1.7-12mdk
-- snapshot. locales corected, nicer wizards.
-
-* Thu Aug 30 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-11mdk
-- new snapshot, mousedrake fixes again.
-
-* Wed Aug 29 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-10mdk
-- new snapshot, mousedrake fixes.
-
-* Fri Aug 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-9mdk
-- snapshot for 8.1 beta2.
-
-* Fri Aug 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-8mdk
-- bugfix.
-- new snapshot. mousedrake experimental.
-
-* Thu Aug 23 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-7mdk
-- fix drakboot bug
-- macros to fix some rpmlint warnings
-
-* Wed Aug 22 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-6mdk
-- put a require on "perl" which is needed for Data::Dumper in drakautoinst
-
-* Wed Aug 22 2001 dam's <damien@mandrakesoft.com> 1.1.7-5mdk
-- snapshot. draknet improvments, bug fixes.
-
-* Mon Aug 20 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-4mdk
-- new fstab munching code
-
-* Sat Aug 18 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-3mdk
-- new diskdrake (with interactive version => newt)
-- drakxtools-http fix
-
-* Tue Aug 14 2001 dam's <damien@mandrakesoft.com> 1.1.7-2mdk
-- added doc (it's a shame...)
-
-* Tue Aug 14 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-1mdk
-- add drakautoinst
-
-* Mon Aug 13 2001 dam's <damien@mandrakesoft.com> 1.1.6-3mdk
-- snapshot
-
-* Tue Aug  7 2001 dam's <damien@mandrakesoft.com> 1.1.6-2mdk
-- added draknet_splash pixmap
-
-* Tue Aug  7 2001 Pixel <pixel@mandrakesoft.com> 1.1.6-1mdk
-- add drakxtools_http
-
-* Fri Aug  3 2001 dam's <damien@mandrakesoft.com> 1.1.5-106mdk
-- added network/*.pm
-
-* Tue Jul 31 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-105mdk
-- add require perl-MDK-Common
-- fix for cp -rf (fuck FreeBSD (c))
-
-* Tue Jul 31 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-104mdk
-- fix my error: %%files with 2 times "-f <file>" doesn't work :-(
-
-* Mon Jul 30 2001 dam's <damien@mandrakesoft.com> 1.1.5-103mdk
-- updated with cooker install.
-- added require on XFree86-75dpi-fonts
-- merged with pixel specfile to handle mo.
-
-* Mon May  7 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-102mdk
-- updated bootloader.pm according to new lilo package (lilo-{menu,graphic,text})
-
-* Wed Apr 25 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-101mdk
-- updated with oem update for DrakX.
-- minor bug correction on printerdrake.
-- added minor features to XFdrake.
-
-* Wed Apr 18 2001 dam's <damien@mandrakesoft.com> 1.1.5-100mdk
-- added require on usermode.
-- added source 2 and 3.
-- snapshot. netconnect corrections. final package
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-99mdk
-- snapshot. mousedrake corrected. RC6
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-98mdk
-- snapshot. autologin corrected. RC5
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-97mdk
-- snapshot. RC4
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-96mdk
-- snapshot. RC3
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-95mdk
-- snapshot. RC2
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-94mdk
-- snapshot. RC
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-93mdk
-- draknet and tinyfirewall fixes
-
-* Sun Apr 15 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-92mdk
-- bootlook fix & layout
-
-* Fri Apr 13 2001 dam's <damien@mandrakesoft.com> 1.1.5-91mdk
-- snapshot
-
-* Fri Apr 13 2001 dam's <damien@mandrakesoft.com> 1.1.5-90mdk
-- snapshot
-
-* Thu Apr 12 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-89mdk
-- snapshot
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-88mdk
-- snapshot. pcmcia network corrected
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-87mdk
-- snapshot. Better network configuration
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-86mdk
-- snapshot.
-
-* Wed Apr 11 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-85mdk
-- really fix printerdrake and snap.
-
-* Wed Apr 11 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-84mdk
-- fix printerdrake and snap.
-
-* Tue Apr 10 2001 dam's <damien@mandrakesoft.com> 1.1.5-83mdk
-- bug correction.
-
-* Mon Apr  9 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-82mdk
-- snap as always
-
-* Mon Apr  9 2001 Yves Duret <yduret@mandraksoft.com> 1.1.5-81mdk
-- snaphshot again and again
-
-* Mon Apr  9 2001 dam's <damien@mandrakesoft.com> 1.1.5-80mdk
-- snapshot. bug fix
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-79mdk
-- snapshot. bug fix.
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-78mdk
-- added require on XFree86-100dpi-fonts
-- various debugging
-- new tinyfirewall
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-77mdk
-- snapshot
-- net_monitor added.
-
-* Fri Apr  6 2001 dam's <damien@mandrakesoft.com> 1.1.5-76mdk
-- corrected compilation error.
-
-* Fri Apr  6 2001 yves <yduret@mandrakesoft.com> 1.1.5-75mdk
-- snapshot : drakgw updated, boot config fix
-
-* Thu Apr  5 2001 dam's <damien@mandrakesoft.com> 1.1.5-74mdk
-- snapshot.
-
-* Mon Apr  2 2001 dam's <damien@mandrakesoft.com> 1.1.5-73mdk
-- snapshot.
-
-* Mon Apr  2 2001 dam's <damien@mandrakesoft.com> 1.1.5-72mdk
-- snapshot, typo fixs.
-
-* Fri Mar 30 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-71mdk
-- snapshot & fixes
-
-* Fri Mar 30 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-70mdk
-- snapshot : boot coonfig updated
-
-* Thu Mar 29 2001 dam's <damien@mandrakesoft.com> 1.1.5-69mdk
-- snapshot
-
-* Thu Mar 29 2001 dam's <damien@mandrakesoft.com> 1.1.5-68mdk
-- snapshot.
-
-* Thu Mar 29 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-67mdk
-- new snapshot (XFdrake should be working)
-
-* Wed Mar 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-66mdk
-- corrected tinyfirewall last step
-
-* Wed Mar 28 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-65mdk
-- fixed wrong generation of second mouse support
-
-* Wed Mar 28 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-64mdk
-- fixed multi-mouse support for XF3
-- fixed XFdrake (read old config file before so probe overwrite)
-
-* Wed Mar 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-63mdk
-- added draksec embedded mode
-- corrected tinyfirewall for 2.4 kernels
-- corrected bad translations in draknet
-
-* Tue Mar 27 2001 dam's <damien@mandrakesoft.com> 1.1.5-62mdk
-- idem.
-
-* Sat Mar 24 2001 dam's <damien@mandrakesoft.com> 1.1.5-61mdk
-- corrected tinyfirewall
-
-* Fri Mar 23 2001 dam's <damien@mandrakesoft.com> 1.1.5-60mdk
-- snapshot
-- corrected require.
-
-* Fri Mar 23 2001 dam's <damien@mandrakesoft.com> 1.1.5-59mdk
-- added ldetect in require.
-- tinyfirewall included.
-
-* Thu Mar 22 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-58mdk
-- updated drakboot, new snapshot
-
-* Thu Mar 22 2001 dam's <damien@mandrakesoft.com> 1.1.5-57mdk
-- draknet without mail conf, new snapshot.
-
-* Thu Mar 22 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-56mdk
-- new version that will work with perl-base (at least XFdrake)
-
-* Thu Mar 22 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-55mdk
-- require perl-base not perl, it should be enough
-
-* Thu Mar 22 2001 dam's <damien@mandrakesoft.com> 1.1.5-54mdk
-- first release with tinyfirewall. Not stable.
-- corrected gmon pb, I suck.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-53mdk
-- corrected bad links.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-52mdk
-- no crash anymore.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-51mdk
-- updated draknet. new snapshot.
-
-* Wed Mar 14 2001 dam's <damien@mandrakesoft.com> 1.1.5-50mdk
-- some minor label improvements.
-
-* Tue Mar 13 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-49mdk
-- updated bootlook
-- macros
-
-* Mon Mar 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-48mdk
-- correted wizard pixmaps name
-
-* Mon Mar 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-47mdk
-- new and shinny drakxservices
-
-* Tue Mar  6 2001 dam's <damien@mandrakesoft.com> 1.1.5-46mdk
-- XFdrake works + other improvements
-
-* Thu Mar  1 2001 dam's <damien@mandrakesoft.com> 1.1.5-45mdk
-- updated embedded mode.
-
-* Wed Feb 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-44mdk
-- XFdrake : new look.
-- draknet : some corrections.
-- install : some improvements
-
-* Mon Feb 26 2001 dam's <damien@mandrakesoft.com> 1.1.5-43mdk
-- corrected draknet, and some other stuff
-
-* Mon Feb 26 2001 dam's <damien@mandrakesoft.com> 1.1.5-42mdk
-- new draknet, with wizard and profiles.
-- drakboot short-circuited.
-- new pixmaps policy.
-
-* Fri Feb 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-41mdk
-- require perl-GTK-GdkImlib, fix XFdrake and draknet with no perl-GTK
-
-* Fri Feb 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-40mdk
-- split in drakxtools and drakxtools-newt
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-39mdk
-- install() and SHAR_PATH bug fixed in standalone.pm
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-38mdk
-- bug fix.
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-37mdk
-- bug correction inclusion.
-
-* Wed Feb  7 2001 dam's <damien@mandrakesoft.com> 1.1.5-36mdk
-- snapshot. Included embedded mode (for control-center), and wizard mode.
-
-* Mon Dec 18 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-35mdk
-- new version (lspcidrake not here anymore, requires ldetect-lst => don't
-include pcitable/... anymore)
-
-
-* Tue Nov 14 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-34mdk
-- snapshot
-- get rid of the rpmlib dependency
-
-* Sat Oct 21 2000 dam's <damien@mandrakesoft.com> 1.1.5-33mdk
-- RC1_fixed tagged cvs version.
-- Video cards handling enhanced
-- isa isdn-cards and non detected isdn pci-cards spported.
-
-* Thu Oct 19 2000 dam's <damien@mandrakesoft.com> 1.1.5-32mdk
-- snapshot.
-
-* Mon Oct  9 2000 dam's <damien@mandrakesoft.com> 1.1.5-31mdk
-- snapshot.
-
-* Fri Oct  6 2000 dam's <damien@mandrakesoft.com> 1.1.5-30mdk
-- snapshot.
-
-* Fri Oct  6 2000 dam's <damien@mandrakesoft.com> 1.1.5-29.1mdk
-- snapshot. not fully stable.
-
-* Thu Oct  5 2000 dam's <damien@mandrakesoft.com> 1.1.5-29mdk
-- snapshot.
-
-* Thu Oct 05 2000 François Pons <fpons@mandrakesoft.com> 1.1.5-28mdk
-- snapshot.
-
-* Tue Oct 03 2000 François Pons <fpons@mandrakesoft.com> 1.1.5-27mdk
-- snapshot.
-
-* Sun Oct  1 2000 dam's <damien@mandrakesoft.com> 1.1.5-26mdk
-- snapshot.
-
-* Sat Sep 30 2000 dam's <damien@mandrakesoft.com> 1.1.5-25mdk
-- snapshot.
-
-* Sat Sep 30 2000 dam's <damien@mandrakesoft.com> 1.1.5-24mdk
-- snapshot. draknet frozen.
-
-* Fri Sep 29 2000 dam's <damien@mandrakesoft.com> 1.1.5-23mdk
-- snapshot.
-
-* Thu Sep 28 2000 dam's <damien@mandrakesoft.com> 1.1.5-22mdk
-- modified spec.
-- snapshot
-- liveupdate
-
-* Wed Sep 27 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-21mdk
-- snapshot
-
-* Tue Sep 26 2000 dam's <damien@mandrakesoft.com> 1.1.5-20mdk
-- snapshot
-
-* Mon Sep 25 2000 dam's <damien@mandrakesoft.com> 1.1.5-19mdk
-- snapshot.
-
-* Fri Sep 22 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-18mdk
-- new snapshot
-- remove BuildRequires kudzu-devel, I suck bigtime..
-
-* Thu Sep 21 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-17mdk
-- new snapshot
-- BuildRequires kudzu-devel since ddcprobe/ddcxinfos.c uses /usr/include/vbe.h
-
-* Wed Sep 20 2000 dam's <damien@mandrakesoft.com> 1.1.5-16mdk
-- cvs snapshot. See changelog file
-
-* Wed Sep 20 2000 dam's <damien@mandrakesoft.com> 1.1.5-15mdk
-- cvs snapshot. See changelog file
-
-* Fri Sep 15 2000 dam's <damien@mandrakesoft.com> 1.1.5-14mdk
-- cvs snapshot.
-- draknet : better dsl configuration.
-
-* Thu Sep 14 2000 dam's <damien@mandrakesoft.com> 1.1.5-13mdk
-- cvs snapshot.
-- draknet : wizard mode. isdn_db.txt moved to /usr/share. No makedev.sh any more
-
-* Mon Sep 11 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-12mdk
-- add handling for gnome and kde2 in Xdrakres
-
-* Thu Sep  7 2000 dam's <damien@mandrakesoft.com> 1.1.5-11mdk
-- corrected draknet launch error.
-
-* Thu Sep  7 2000 dam's <damien@mandrakesoft.com> 1.1.5-10mdk
-- ISDN connection should work. test it!
-
-* Tue Sep  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-9mdk
-- setAutologin fixed in XFdrake
-
-* Tue Sep  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-8mdk
-- adduserdrake fixed
-
-* Sat Sep  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-7mdk
-- fix some typos in standalone/keyboarddrake
-- add require perl
-
-* Sat Sep  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-6mdk
-- add %%lang tags
-
-* Tue Aug 29 2000 dam's <damien@mandrakesoft.com> 1.1.5-5mdk
-- draknet : isa cards better recognized.
-
-* Mon Aug 28 2000 dam's <damien@mandrakesoft.com> 1.1.5-4mdk
-- corrected draknet. Please test it!
-
-* Sun Aug 27 2000 dam's <damien@mandrakesoft.com> 1.1.5-3mdk
-- Added draknet in standalone
-
-* Fri Aug 18 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-2mdk
-- add requires to modutils >= 2.3.11 because drakgw is reading
-  /etc/modules.conf which has been introduced in 2.3.11
-
-* Fri Aug 18 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-1mdk
-- added `drakgw' in standalone (Internet Connection Sharing tool)
-
-* Fri Aug 11 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-3mdk
-- new snapshot
-
-* Thu Aug 10 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-2mdk
-- add noreplace for diskdrake.rc
-
-* Thu Aug 10 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-1mdk
-- new snapshot
-
-* Mon Aug 07 2000 Frederic Lepied <flepied@mandrakesoft.com> 1.1.3-2mdk
-- automatically added BuildRequires
-
-* Fri Jul 21 2000 Pixel <pixel@mandrakesoft.com> 1.1.3-1mdk
-- new version, BM
-
-* Wed Jul 05 2000 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.2-2mdk
-- build against new libbz2
-
-* Mon Jun 26 2000 Pixel <pixel@mandrakesoft.com> 1.1.2-1mdk
-- new version
-
-* Tue Jun 13 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-13mdk
-- hopefully fix XFdrake and DDR nvidia cards (silly xfree that is)
-
-* Mon Jun  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-12mdk
-- fix sbus missing
-
-* Sat Jun  3 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-10mdk
-- fix draksec calling init.sh instead of msec
-
-* Thu May 25 2000 Chmouel Boudjnah <chmouel@mandrakesoft.com> 1.1.1-9mdk
-- Don't display x86 stuff on drakboot when we are on others arch.
-
-* Thu May 25 2000 François Pons <fpons@mandrakesoft.com> 1.1.1-8mdk
-- update with first version for sparc and sparc64.
-- fix for printer configuration for SAMBA and NCP (security issue).
-
-* Tue May  9 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-7mdk
-- many small fixes (bis)
-
-* Tue May  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-6mdk
-- many small fixes
-
-* Wed Apr 26 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-5mdk
-- new version (fix in adduserdrake, enhance interactive_newt)
-
-* Wed Apr 19 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-4mdk
-- llseek works, not lseek64 :(  (need more testing)
-
-* Wed Apr 19 2000 François Pons <fpons@mandrakesoft.com> 1.1.1-3mdk
-- updated with CVS of DrakX.
-
-* Fri Mar 31 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-2mdk
-- obsoletes setuptool, link setuptool to drakxconf
-
-* Fri Mar 31 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-1mdk
-- new version (added drakboot for lilo/grub, XFdrake -xf4 for XFree4)
-
-* Sat Mar 25 2000 Pixel <pixel@mandrakesoft.com> 1.1-1mdk
-- new group
-- new version
-
-* Wed Jan 12 2000 François PONS <fpons@mandrakesoft.com>
-- complete update with DrakX, small fixe on printerdrake again.
-
-* Wed Jan 12 2000 François PONS <fpons@mandrakesoft.com>
-- corrected missing generic postscript and text driver for
-  printderdrake.
-
-* Wed Jan 12 2000 François PONS <fpons@mandrakesoft.com>
-- corrected bad resolution setting in printerdrake.
-
-* Wed Jan 12 2000 François PONS <fpons@mandrakesoft.com>
-- fixed print on STDOUT in printerdrake.
-- corrected printerdrake against not available drivers in gs.
-
-* Mon Jan 10 2000 Pixel <pixel@mandrakesoft.com>
-- new version (bis)
-- printerdrake install rhs-printfilters via urpmi if needed
-
-* Fri Jan 07 2000 François PONS <fpons@mandrakesoft.com>
-- updated XFdrake and PrinterDrake.
-
-* Fri Jan  7 2000 Pixel <pixel@mandrakesoft.com>
-- fixed a bug causing no i18n for rpmdrake
-- add require urpmi
-
-* Thu Jan  6 2000 Pixel <pixel@mandrakesoft.com>
-- fix an error case in XFdrake
-
-* Tue Jan  4 2000 Pixel <pixel@mandrakesoft.com>
-- adduserdrake accept user names on command line
-- minor fixes
-
-* Fri Dec 31 1999 Pixel <pixel@mandrakesoft.com>
-- 32mdk
-
-* Wed Dec 29 1999 Pixel <pixel@mandrakesoft.com>
-- make rpmlint happier
-- minor fixes
-
-* Mon Dec 27 1999 Pixel <pixel@mandrakesoft.com>
-- better XFdrake and minor fixes
-
-* Fri Dec 24 1999 Pixel <pixel@mandrakesoft.com>
-- new version (better adduserdrake and more)
-- add /usr/bin/* (for lspcidrake)
-
-* Wed Dec 22 1999 Pixel <pixel@mandrakesoft.com>
-- do not try display :0 if DISPLAY is unset
-
-* Mon Dec 20 1999 Pixel <pixel@mandrakesoft.com>
-- fixed a bug in drakxservices
-- XFdrake now install XFree86 and XFree86-75dpi-fonts if needed
-- XFdrake now calls /etc/rc.d/init.d/xfs start if needed
-- minor fix
-
-* Sat Dec 18 1999 Pixel <pixel@mandrakesoft.com>
-- added kpackage's icons for rpmdrake
-
-* Thu Dec 16 1999 Pixel <pixel@mandrakesoft.com>
-- bzip2 .po's
-- mount /proc in XFdrake to avoid freeze when called by kudzu
-- added Xdrakres
-
-* Thu Dec 16 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Remove the netdrake ghost.
-
-* Thu Dec 16 1999 Pixel <pixel@mandrakesoft.com>
-- fix draksec
-- many changes in libDrakX
-
-* Sat Dec 11 1999 Pixel <pixel@mandrakesoft.com>
-- adduserdrake added and some more
-
-* Thu Dec  9 1999 Pixel <pixel@linux-mandrake.com>
-- added drakxconf, drakxservices
-- handle non root via kdesu if X
-- warning go to syslog
-
-* Wed Dec  8 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Add %post and %postun to link redhat tools to our tools.
-- Obsoletes: Xconfigurator mouseconfig kbdconfig printtool
-- A lots of changes/fix.
-
-* Thu Dec  2 1999 Pixel <pixel@linux-mandrake.com>
-- keyboarddrake added, and many changes
-- fixed typos
-
-* Fri Nov 26 1999 Pixel <pixel@linux-mandrake.com>
-- new version (printerdrake) (did i say lspcidrake was there too?)
-
-* Wed Nov 24 1999 Pixel <pixel@linux-mandrake.com>
-- new version
-- fixed *.o bundled in the %source
-
-* Sun Nov 21 1999 Pixel <pixel@mandrakesoft.com>
-- removed %config for diskdrake.rc (should i?)
-- removed xtest from the requires
-- added %config for diskdrake.rc (should i?)
-- strip .so and ddcxinfos (nice rpmlint :)
-
-* Sat Nov 20 1999 Pixel <pixel@mandrakesoft.com>
-- added MonitorsDB to %files (silly me:-!)
-
-* Thu Nov 18 1999 Pixel <pixel@mandrakesoft.com>
-- precised the required version for perl-GTK
-
-* Thu Nov 18 1999 Pixel <pixel@mandrakesoft.com>
-- First version
-
-
-# end of file
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
deleted file mode 100644
index 10da0e72c..000000000
--- a/perl-install/fs.pm
+++ /dev/null
@@ -1,868 +0,0 @@
-package fs; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::System;
-use MDK::Common::Various;
-use common;
-use log;
-use devices;
-use partition_table qw(:types);
-use run_program;
-use swap;
-use detect_devices;
-use modules;
-use fsedit;
-use loopback;
-
-
-sub read_fstab {
-    my ($prefix, $file, $all_options) = @_;
-
-    my %comments;
-    my $comment;
-    my @l = grep {
-	if (/^\s*#/) {
-	    $comment .= chomp_($_) . "\n";
-	    0;
-	} else {
-	    $comments{$_} = $comment if $comment;
-	    $comment = '';
-	    1;
-	}
-    } cat_("$prefix$file");
-
-    #- attach comments at the end of fstab to the previous line
-    $comments{$l[-1]} = $comment if $comment;
-
-    map {
-	my ($dev, $mntpoint, $type, $options, $freq, $passno) = split;
-	my $comment = $comments{$_};
-
-	$options = 'defaults' if $options eq 'rw'; # clean-up for mtab read
-
-	$type = fs2type($type);
-	if ($type eq 'supermount') {
-	    # normalize this bloody supermount
-	    $options = join(",", 'supermount', grep {
-		if (/fs=(.*)/) {
-		    $type = $1;
-		    0;
-		} elsif (/dev=(.*)/) {
-		    $dev = $1;
-		    0;
-		} elsif ($_ eq '--') {
-		    0;
-		} else {
-		    1;
-		}
-	    } split(',', $options));
-	} elsif ($type eq 'smb') {
-	    # prefering type "smbfs" over "smb"
-	    $type = 'smbfs';
-	}
-	$mntpoint =~ s/\\040/ /g;
-	$dev =~ s/\\040/ /g;
-
-	my $h = { 
-		 device => $dev, mntpoint => $mntpoint, type => $type, 
-		 options => $options, comment => $comment,
-		 if_($all_options, freq => $freq, passno => $passno),
-		};
-
-	($h->{major}, $h->{minor}) = unmakedev((stat "$prefix$dev")[6]);
-
-	if ($dev =~ m,/(tmp|dev)/,) {
-	    my $symlink = readlink("$prefix$dev");
-	    $dev =~ s,/(tmp|dev)/,,;
-
-	    if ($symlink =~ m|^[^/]+$|) {
-		$h->{device_alias} = $dev;
-		$h->{device} = $symlink;
-	    } else {
-		$h->{device} = $dev;
-	    }
-	}
-
-	if ($h->{options} =~ /credentials=/) {
-	    require network::smb;
-	    #- remove credentials=file with username=foo,password=bar,domain=zoo
-	    #- the other way is done in fstab_to_string
-	    my ($options, $unknown) = mount_options_unpack($h);
-	    my $file = delete $options->{'credentials='};
-	    my $credentials = network::smb::read_credentials_raw("$prefix$file");
-	    if ($credentials->{username}) {
-		$options->{"$_="} = $credentials->{$_} foreach qw(username password domain);
-		mount_options_pack($h, $options, $unknown);
-	    }
-	}
-
-	$h;
-    } @l;
-}
-
-sub merge_fstabs {
-    my ($loose, $fstab, @l) = @_;
-
-    foreach my $p (@$fstab) {
-	my ($p2) = grep { fsedit::is_same_hd($_, $p) } @l or next;
-	@l       = grep { !fsedit::is_same_hd($_, $p) } @l;
-
-	$p->{mntpoint} = $p2->{mntpoint} if delete $p->{unsafeMntpoint};
-
-	$p->{type} = $p2->{type} if $p2->{type} && !$loose;
-	$p->{options} = $p2->{options} if $p2->{options} && !$loose;
-	#- important to get isMounted property else DrakX may try to mount already mounted partitions :-(
-	add2hash($p, $p2);
-	$p->{device_alias} ||= $p2->{device_alias} || $p2->{device} if $p->{device} ne $p2->{device} && $p2->{device} !~ m|/|;
-
-	$p->{type} && $p2->{type} && $p->{type} ne $p2->{type} && type2fs($p) ne type2fs($p2) &&
-	  $p->{type} ne 'auto' && $p2->{type} ne 'auto' and
-	    log::l("err, fstab and partition table do not agree for $p->{device} type: " .
-		   (type2fs($p) || type2name($p->{type})) . " vs ", (type2fs($p2) || type2name($p2->{type})));
-    }
-    @l;
-}
-
-sub add2all_hds {
-    my ($all_hds, @l) = @_;
-
-    @l = merge_fstabs('', [ fsedit::get_really_all_fstab($all_hds) ], @l);
-
-    foreach (@l) {
-	my $s = 
-	    isThisFs('nfs', $_) ? 'nfss' :
-	    isThisFs('smbfs', $_) ? 'smbs' :
-	    'special';
-	push @{$all_hds->{$s}}, $_;
-    }
-}
-
-sub get_major_minor {
-    eval {
-	my (undef, $major, $minor) = devices::entry($_->{device});
-	($_->{major}, $_->{minor}) = ($major, $minor);
-    } foreach @_;
-}
-
-sub merge_info_from_mtab {
-    my ($fstab) = @_;
-
-    my @l1 = map { my $l = $_; 
-		   my %l = (type => fs2type('swap')); 
-		   $l{$_} = $l->{$_} foreach qw(device major minor); 
-		   \%l;
-	       } read_fstab('', '/proc/swaps');
-    
-    my @l2 = map { read_fstab('', $_) } '/etc/mtab', '/proc/mounts';
-
-    foreach (@l1, @l2) {
-	log::l("found mounted partition on $_->{device} with $_->{mntpoint}");
-	if ($::isInstall && $_->{mntpoint} eq '/tmp/hdimage') {
-	    log::l("found hdimage on $_->{device}");
-	    $_->{real_mntpoint} = delete $_->{mntpoint};
-	    $_->{mntpoint} = common::usingRamdisk() && "/mnt/hd"; #- remap for hd install.
-	}
-	$_->{isMounted} = $_->{isFormatted} = 1;
-	delete $_->{options};
-    } 
-    merge_fstabs('loose', $fstab, @l1, @l2);
-}
-
-# - when using "$loose", it does not merge in type&options from the fstab
-sub merge_info_from_fstab {
-    my ($fstab, $prefix, $uniq, $loose) = @_;
-
-    my @l = grep { 
-	if ($uniq) {
-	    my $part = fsedit::mntpoint2part($_->{mntpoint}, $fstab);
-	    !$part || fsedit::is_same_hd($part, $_); #- keep it only if it is the mountpoint AND the same device
-	} else {
-	    1;
-	}
-    } read_fstab($prefix, "/etc/fstab", 'all_options');
-
-    merge_fstabs($loose, $fstab, @l);
-}
-
-sub prepare_write_fstab {
-    my ($all_hds, $prefix, $keep_smb_credentials) = @_;
-    $prefix ||= '';
-
-    my @l1 = (fsedit::get_really_all_fstab($all_hds), @{$all_hds->{special}});
-    my @l2 = read_fstab($prefix, "/etc/fstab", 'all_options');
-
-    {
-	#- remove entries from @l2 that are given by @l1
-	#- this is needed to allow to unset a mount point
-	my %new; 
-	$new{$_->{device}} = 1 foreach @l1;
-	delete $new{none}; #- special case for device "none" which can be _mounted_ more than once
-	@l2 = grep { !$new{$_->{device}} } @l2;
-    }
-
-    my %new;
-    my @smb_credentials;
-    my @l = map { 
-	my $device = 
-	  $_->{device} eq 'none' || member($_->{type}, qw(nfs smbfs)) ? 
-	      $_->{device} : 
-	  isLoopback($_) ? 
-	      ($_->{mntpoint} eq '/' ? "/initrd/loopfs" : "$_->{loopback_device}{mntpoint}") . $_->{loopback_file} :
-	  do {
-	      my $dir = $_->{device} =~ m|^/| ? '' : '/dev/';
-	      eval { devices::make("$prefix$dir$_->{device}") };
-	      "$dir$_->{device}";
-	  };
-
-	my $real_mntpoint = $_->{mntpoint} || ${{ '/tmp/hdimage' => '/mnt/hd' }}{$_->{real_mntpoint}};
-	mkdir("$prefix$real_mntpoint", 0755) if $real_mntpoint =~ m|^/|;
-	my $mntpoint = loopback::carryRootLoopback($_) ? '/initrd/loopfs' : $real_mntpoint;
-
-	my ($freq, $passno) =
-	  exists $_->{freq} ?
-	    ($_->{freq}, $_->{passno}) :
-	  isTrueFS($_) && $_->{options} !~ /encryption=/ ? 
-	    (1, $_->{mntpoint} eq '/' ? 1 : loopback::carryRootLoopback($_) ? 0 : 2) : 
-	    (0, 0);
-
-	if (($device eq 'none' || !$new{$device}) && ($mntpoint eq 'swap' || !$new{$mntpoint})) {
-	    #- keep in mind the new line for fstab.
-	    $new{$device} = 1;
-	    $new{$mntpoint} = 1;
-
-	    my $options = $_->{options};
-
-	    if (isThisFs('smbfs', $_) && $options =~ /password=/ && !$keep_smb_credentials) {
-		require network::smb;
-		if (my ($opts, $smb_credentials) = network::smb::fstab_entry_to_credentials($_)) {
-		    $options = $opts;
-		    push @smb_credentials, $smb_credentials;
-		}
-	    }
-
-	    my $type = type2fs($_);
-
-	    my $dev = $_->{device_alias} ? "/dev/$_->{device_alias}" : $device;
-
-	    $mntpoint =~ s/ /\\040/g;
-	    $dev =~ s/ /\\040/g;
-
-	    # handle bloody supermount special case
-	    if ($options =~ /supermount/) {
-		my @l = grep { $_ ne 'supermount' } split(',', $options);
-		my @l1 = grep { member($_, 'ro', 'exec') } @l;
-		my @l2 = difference2(\@l, \@l1);
-		$options = join(",", "dev=$dev", "fs=$type", @l1, if_(@l2, '--', @l2));
-		($dev, $type) = ('none', 'supermount');
-	    }
-
-	    [ $mntpoint, $_->{comment} . join(' ', $dev, $mntpoint, $type, $options || 'defaults', $freq, $passno) . "\n" ];
-	} else {
-	    ()
-	}
-    } grep { $_->{device} && ($_->{mntpoint} || $_->{real_mntpoint}) && $_->{type} } (@l1, @l2);
-
-    join('', map { $_->[1] } sort { $a->[0] cmp $b->[0] } @l), \@smb_credentials;
-}
-
-sub fstab_to_string {
-    my ($all_hds, $prefix) = @_;
-    my ($s, undef) = prepare_write_fstab($all_hds, $prefix, 'keep_smb_credentials');
-    $s;
-}
-
-sub write_fstab {
-    my ($all_hds, $prefix) = @_;
-    log::l("writing $prefix/etc/fstab");
-    my ($s, $smb_credentials) = prepare_write_fstab($all_hds, $prefix, '');
-    output("$prefix/etc/fstab", $s);
-    network::smb::save_credentials($_) foreach @$smb_credentials;
-}
-
-sub auto_fs() {
-    grep { chop; $_ && !/nodev/ } cat_("/etc/filesystems");
-}
-
-sub mount_options {
-    my %non_defaults = (
-			sync => 'async', noatime => 'atime', noauto => 'auto', ro => 'rw', 
-			user => 'nouser', nodev => 'dev', noexec => 'exec', nosuid => 'suid',
-		       );
-    my @user_implies = qw(noexec nodev nosuid);
-    \%non_defaults, \@user_implies;
-}
-
-# simple function
-# use mount_options_unpack + mount_options_pack for advanced stuff
-sub add_options(\$@) {
-    my ($option, @options) = @_;
-    my %l; @l{split(',', $$option), @options} = (); delete $l{defaults};
-    $$option = join(',', keys %l) || "defaults";
-}
-
-sub mount_options_unpack {
-    my ($part) = @_;
-    my $packed_options = $part->{options};
-
-    my ($non_defaults, $user_implies) = mount_options();
-
-    my @auto_fs = auto_fs();
-    my %per_fs = (
-		  iso9660 => [ qw(unhide) ],
-		  vfat => [ qw(umask=0) ],
-		  nfs => [ qw(rsize=8192 wsize=8192) ],
-		  smbfs => [ qw(username= password=) ],
-		  reiserfs => [ 'notail' ],
-		 );
-    push @{$per_fs{$_}}, 'usrquota', 'grpquota' foreach 'ext2', 'ext3', 'xfs';
-
-    while (my ($fs, $l) = each %per_fs) {
-	isThisFs($fs, $part) || $part->{type} eq 'auto' && member($fs, @auto_fs) or next;
-	$non_defaults->{$_} = 1 foreach @$l;
-    }
-
-    $non_defaults->{encrypted} = 1 if !$part->{isFormatted} || isSwap($part);
-
-    $non_defaults->{supermount} = 1 if member(type2fs($part), 'auto', @auto_fs);
-
-    my $defaults = { reverse %$non_defaults };
-    my %options = map { $_ => '' } keys %$non_defaults;
-    my @unknown;
-    foreach (split(",", $packed_options)) {
-	if ($_ eq 'user') {
-	    $options{$_} = 1 foreach ('user', @$user_implies);
-	} elsif (exists $non_defaults->{$_}) {
-	    $options{$_} = 1;
-	} elsif ($defaults->{$_}) {
-	    $options{$defaults->{$_}} = 0;
-	} elsif (/(.*?=)(.*)/) {
-	    $options{$1} = $2;
-	} else {
-	    push @unknown, $_;
-	}
-    }
-    # merge those, for cleaner help
-    $options{'rsize=8192,wsize=8192'} = delete $options{'rsize=8192'} && delete $options{'wsize=8192'}
-      if exists $options{'rsize=8192'};
-
-    my $unknown = join(",", @unknown);
-    \%options, $unknown;
-}
-
-sub mount_options_pack_ {
-    my ($part, $options, $unknown) = @_;
-
-    my ($non_defaults, $user_implies) = mount_options();
-    my @l;
-
-    if (delete $options->{user}) {
-	push @l, 'user';
-	foreach (@$user_implies) {
-	    if (!delete $options->{$_}) {
-		# overriding
-		$options->{$non_defaults->{$_}} = 1;
-	    }
-	}
-    }
-    push @l, map_each { if_($::b, $::a =~ /=$/ ? "$::a$::b" : $::a) } %$options;
-    push @l, $unknown;
-
-    join(",", uniq(grep { $_ } @l));
-}
-sub mount_options_pack {
-    my ($part, $options, $unknown) = @_;
-    $part->{options} = mount_options_pack_($part, $options, $unknown);
-    MDK::Common::Various::noreturn();
-}
-
-sub mount_options_help {
-    my %help = map { $_ => '' } @_;
-    my %short = map { if_(/(.*?)=/, "$1=" => $_) } keys %help;
-
-    foreach (split(':', $ENV{LANGUAGE}), '') {
-	my $manpage = "/usr/share/man/$_/man8/mount.8.bz2";
-	-e $manpage or next;
-
-	my ($tp, $option);
-	foreach (`bzip2 -dc $manpage`) {
-	    my $prev_tp = $tp;
-	    $tp = /^\.(TP|RE)/;
-	    my ($s) = /^\.B (.*)/;
-	    if ($prev_tp && $s eq '\-o' .. /X^/) {
-		if (my $v = $prev_tp && $s =~ /^[a-z]/i .. $tp) {
-		    if ($v == 1) {
-			$s = $short{$s} || $s;
-			$option = exists $help{$s} && !$help{$s} ? $s : '';
-		    } elsif ($v !~ 'E0') {
-			s/\\//g;
-			s/\s*"(.*?)"\s*/$1/g if s/^\.BR\s+//;
-			s/^\.B\s+//;
-			$help{$option} .= $_ if $option;
-		    }
-		}        
-	    }
-	}
-    }
-    %help;
-}
-
-sub set_default_options {
-    my ($part, $is_removable, $useSupermount, $security, $iocharset, $codepage) = @_;
-
-    my ($options, $unknown) = mount_options_unpack($part);
-
-    if ($is_removable) {
-	$options->{supermount} = $useSupermount;
-	$part->{type} = 'auto';	# if supermount, code below will handle choosing the right type
-    }
-
-    my $is_auto = isThisFs('auto', $part);
-
-    if ($part->{media_type} eq 'cdrom') {
-	$options->{ro} = 1;
-    }
-
-    if ($part->{media_type} eq 'fd') {
-	# slow device so don't loose time, write now!
-	$options->{sync} = 1;
-    }
-
-    if (isTrueFS($part)) {
-	#- noatime on laptops (do not wake up the hd)
-	#- Do  not  update  inode  access times on this
-	#- file system (e.g, for faster access  on  the
-	#- news spool to speed up news servers).
-	$options->{noatime} = detect_devices::isLaptop();
-    }
-    if (isThisFs('nfs', $part)) {
-	put_in_hash($options, { 
-			       nosuid => 1, 'rsize=8192,wsize=8192' => 1, soft => 1,
-			      });
-    }
-    if (isFat($part) || $is_auto) {
-
-	put_in_hash($options, {
-			       user => 1, noexec => 0,
-			      }) if !exists $part->{rootDevice}; # partition means no removable media
-
-	put_in_hash($options, {
-			       'umask=0' => $security < 3, 'iocharset=' => $iocharset, 'codepage=' => $codepage,
-			      });
-    }
-    if (isThisFs('ntfs', $part) || $is_auto) {
-	put_in_hash($options, { 'iocharset=' => $iocharset });
-    }
-    if (isThisFs('iso9660', $part) || $is_auto) {
-	put_in_hash($options, { user => 1, noexec => 0, 'iocharset=' => $iocharset });
-    }
-    if (isThisFs('reiserfs', $part)) {
-	$options->{notail} = 1;
-    }
-    if (isLoopback($part) && !isSwap($part)) { #- no need for loop option for swap files
-	$options->{loop} = 1;
-    }
-
-    # rationalize: no need for user
-    if ($options->{autofs} || $options->{supermount}) {
-	$options->{user} = 0;
-    }
-
-    # have noauto when we have user
-    $options->{noauto} = 1 if $options->{user}; 
-
-    if ($options->{user}) {
-	# ensure security  (user_implies - noexec as noexec is not a security matter)
-	$options->{$_} = 1 foreach 'nodev', 'nosuid';
-    }
-
-    mount_options_pack($part, $options, $unknown);
-}
-
-sub set_all_default_options {
-    my ($all_hds, $useSupermount, $security, $iocharset, $codepage) = @_;
-
-    my @removables = @{$all_hds->{raw_hds}};
-
-    foreach my $part (fsedit::get_really_all_fstab($all_hds)) {
-	set_default_options($part, member($part, @removables), $useSupermount, $security, $iocharset, $codepage);
-    }
-}
-
-sub set_removable_mntpoints {
-    my ($all_hds) = @_;
-
-    my %names;
-    foreach (@{$all_hds->{raw_hds}}) {
-	my $name = $_->{media_type};
-	if (member($name, 'hd', 'fd')) {
-	    if (detect_devices::isZipDrive($_)) {
-		$name = 'zip';
-	    } elsif ($name eq 'fd') {
-		$name = 'floppy';
-	    } else {
-		log::l("set_removable_mntpoints: don't know what to with hd $_->{device}");
-		next;
-	    }
-	}
-	if ($name) {
-	    my $s = ++$names{$name};
-	    $_->{mntpoint} ||= "/mnt/$name" . ($s == 1 ? '' : $s);
-	}
-    }
-}
-
-sub get_raw_hds {
-    my ($prefix, $all_hds) = @_;
-
-    $all_hds->{raw_hds} = 
-      [ 
-       detect_devices::floppies(), 
-       detect_devices::cdroms__faking_ide_scsi(), 
-       detect_devices::zips__faking_ide_scsi(),
-      ];
-    get_major_minor(@{$all_hds->{raw_hds}});
-
-    my @fstab = read_fstab($prefix, "/etc/fstab", 'all_options');
-    $all_hds->{nfss} = [ grep { isThisFs('nfs', $_) } @fstab ];
-    $all_hds->{smbs} = [ grep { isThisFs('smbfs', $_) } @fstab ];
-    $all_hds->{special} = [
-       (grep { isThisFs('tmpfs', $_) } @fstab),
-       { device => 'none', mntpoint => '/proc', type => 'proc' },
-       { device => 'none', mntpoint => '/dev/pts', type => 'devpts', options => 'mode=0620' },
-    ];
-}
-
-################################################################################
-# formatting functions
-################################################################################
-sub disable_forced_fsck {
-    my ($dev) = @_;
-    run_program::run("tune2fs", "-c0", "-i0", devices::make($dev));
-}
-
-sub format_ext2($@) {
-    #- mke2fs -b (1024|2048|4096) -c -i(1024 > 262144) -N (1 > 100000000) -m (0-100%) -L volume-label
-    #- tune2fs
-    my ($dev, @options) = @_;
-    $dev =~ m,(rd|ida|cciss)/, and push @options, qw(-b 4096 -R stride=16); #- For RAID only.
-    push @options, qw(-b 1024 -O none) if arch() =~ /alpha/;
-    run_program::run("mke2fs", @options, devices::make($dev)) or die _("%s formatting of %s failed", "ext2", $dev);
-}
-sub format_ext3 {
-    my ($dev, @options) = @_;
-    format_ext2($dev, "-j", @options);
-    disable_forced_fsck($dev);
-}
-sub format_reiserfs {
-    my ($dev, @options) = @_;
-    #TODO add -h tea
-    run_program::run("mkreiserfs", "-ff", @options, devices::make($dev)) or die _("%s formatting of %s failed", "reiserfs", $dev);
-}
-sub format_xfs {
-    my ($dev, @options) = @_;
-    run_program::run("mkfs.xfs", "-f", "-q", @options, devices::make($dev)) or die _("%s formatting of %s failed", "xfs", $dev);
-}
-sub format_jfs {
-    my ($dev, @options) = @_;
-    run_program::run("mkfs.jfs", "-f", @options, devices::make($dev)) or die _("%s formatting of %s failed", "jfs", $dev);
-}
-sub format_dos {
-    my ($dev, @options) = @_;
-    run_program::run("mkdosfs", @options, devices::make($dev)) or die _("%s formatting of %s failed", "dos", $dev);
-}
-sub format_hfs {
-    my ($dev, @options) = @_;
-    run_program::run("hformat", @options, devices::make($dev)) or die _("%s formatting of %s failed", "HFS", $dev);
-}
-sub real_format_part {
-    my ($part) = @_;
-
-    $part->{isFormatted} and return;
-
-    my $dev = $part->{real_device} || $part->{device};
-
-    my @options = $part->{toFormatCheck} ? "-c" : ();
-    log::l("formatting device $dev (type ", type2name($part->{type}), ")");
-
-    if (isExt2($part)) {
-	push @options, "-F" if isLoopback($part);
-	push @options, "-m", "0" if $part->{mntpoint} =~ m|^/home|;
-	format_ext2($dev, @options);
-    } elsif (isThisFs("ext3", $part)) {
-	push @options, "-m", "0" if $part->{mntpoint} =~ m|^/home|;
-        format_ext3($dev, @options);
-    } elsif (isThisFs("reiserfs", $part)) {
-        format_reiserfs($dev, @options, if_(c::kernel_version() =~ /^\Q2.2/, "-v", "1"));
-    } elsif (isThisFs("xfs", $part)) {
-        format_xfs($dev, @options);
-    } elsif (isThisFs("jfs", $part)) {
-        format_jfs($dev, @options);
-    } elsif (isDos($part)) {
-        format_dos($dev, @options);
-    } elsif (isWin($part)) {
-        format_dos($dev, @options, '-F', 32);
-    } elsif (isThisFs('hfs', $part)) {
-        format_hfs($dev, @options, '-l', "Untitled");
-    } elsif (isAppleBootstrap($part)) {
-        format_hfs($dev, @options, '-l', "bootstrap");
-    } elsif (isSwap($part)) {
-	my $check_blocks = grep { /^-c$/ } @options;
-        swap::make($dev, $check_blocks);
-    } else {
-	die _("I don't know how to format %s in type %s", $_->{device}, type2name($_->{type}));
-    }
-    $part->{isFormatted} = 1;
-}
-sub format_part {
-    my ($raids, $part, $prefix) = @_;
-    if (isRAID($part)) {
-	require raid;
-	raid::format_part($raids, $part);
-    } elsif (isLoopback($part)) {
-	loopback::format_part($part, $prefix);
-    } else {
-	real_format_part($part);
-    }
-}
-
-################################################################################
-# mounting functions
-################################################################################
-sub set_loop {
-    my ($part) = @_;
-    if (!$part->{real_device}) {
-	eval { modules::load('loop') };
-	$part->{real_device} = devices::set_loop(devices::make($part->{device}), $part->{encrypt_key}, $part->{options} =~ /encryption=(\w+)/);
-    }
-}
-
-sub formatMount_part {
-    my ($part, $raids, $fstab, $prefix, $callback) = @_;
-
-    if (isLoopback($part)) {
-	formatMount_part($part->{loopback_device}, $raids, $fstab, $prefix, $callback);
-    }
-    if (my $p = up_mount_point($part->{mntpoint}, $fstab)) {
-	formatMount_part($p, $raids, $fstab, $prefix, $callback) unless loopback::carryRootLoopback($part);
-    }
-    if ($part->{encrypt_key}) {
-	set_loop($part);
-    }
-    if ($part->{toFormat}) {
-	$callback->($part) if $callback;
-	format_part($raids, $part, $prefix);
-    }
-    mount_part($part, $prefix);
-}
-
-sub formatMount_all {
-    my ($raids, $fstab, $prefix, $callback) = @_;
-    formatMount_part($_, $raids, $fstab, $prefix, $callback) 
-      foreach sort { isLoopback($a) ? 1 : isSwap($a) ? -1 : 0 } grep { $_->{mntpoint} } @$fstab;
-
-    #- ensure the link is there
-    loopback::carryRootCreateSymlink($_, $prefix) foreach @$fstab;
-
-    #- for fun :)
-    #- that way, when install exits via ctrl-c, it gives hand to partition
-    eval {
-	local $SIG{__DIE__} = 'ignore';
-	my ($type, $major, $minor) = devices::entry(fsedit::get_root($fstab)->{device});
-	output "/proc/sys/kernel/real-root-dev", makedev($major, $minor);
-    };
-}
-
-sub mount {
-    my ($dev, $where, $fs, $rdonly, $options) = @_;
-    log::l("mounting $dev on $where as type $fs, options $options");
-
-    -d $where or mkdir_p($where);
-
-    my @fs_modules = qw(vfat hfs romfs ufs reiserfs xfs jfs ext3);
-
-    if (member($fs, 'smb', 'smbfs', 'nfs', 'ntfs') && $::isStandalone) {
-	system('mount', '-t', $fs, $dev, $where, '-o', $options) == 0 or die _("mounting partition %s in directory %s failed", $dev, $where);
-	return; #- do not update mtab, already done by mount(8)
-    } elsif (member($fs, 'ext2', 'proc', 'usbdevfs', 'iso9660', @fs_modules)) {
-	$dev = devices::make($dev) if $fs ne 'proc' && $fs ne 'usbdevfs';
-	$where =~ s|/$||;
-
-	my $flag = c::MS_MGC_VAL();
-	$flag |= c::MS_RDONLY() if $rdonly;
-	my $mount_opt = "";
-
-	if ($fs eq 'vfat') {
-	    $mount_opt = 'check=relaxed';
-	} elsif ($fs eq 'reiserfs') {
-	    #- could be better if we knew if there is a /boot or not
-	    #- without knowing it, / is forced to be mounted with notail
-	    # if $where =~ m|/(boot)?$|;
-	    $mount_opt = 'notail'; #- notail in any case
-	} elsif ($fs eq 'ext2') {
-	    run_program::run("fsck.ext2", "-a", $dev);
-	    $? & 0x0100 and log::l("fsck corrected partition $dev");
-	    $? & 0xfeff and die _("fsck failed with exit code %d or signal %d", $? >> 8, $? & 255);
-	}
-	if (member($fs, @fs_modules)) {
-	    eval { modules::load($fs) };
-	} elsif ($fs eq 'iso9660') {
-	    eval { modules::load('isofs') };
-	}
-	if ($fs eq 'ext3' && $::isInstall) {
-	    # ext3 mount to use the journal
-	    syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die _("mounting partition %s in directory %s failed", $dev, $where) . " ($!)";
-	    syscall_('umount', $where);
-	    # really mount as ext2 during install for speed up
-	    $fs = 'ext2';
-	}
-	log::l("calling mount($dev, $where, $fs, $flag, $mount_opt)");
-	syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die _("mounting partition %s in directory %s failed", $dev, $where) . " ($!)";
-    } else {
-	log::l("skipping mounting $fs partition");
-	return;
-    }
-    local *F;
-    open F, ">>/etc/mtab" or return; #- fail silently, /etc must be read-only
-    print F "$dev $where $fs defaults 0 0\n";
-}
-
-#- takes the mount point to umount (can also be the device)
-sub umount {
-    my ($mntpoint) = @_;
-    $mntpoint =~ s|/$||;
-    log::l("calling umount($mntpoint)");
-    syscall_('umount', $mntpoint) or die _("error unmounting %s: %s", $mntpoint, "$!");
-
-    substInFile { $_ = '' if /(^|\s)$mntpoint\s/ } '/etc/mtab'; #- don't care about error, if we can't read, we won't manage to write... (and mess mtab)
-}
-
-sub mount_part {
-    my ($part, $prefix, $rdonly) = @_;
-
-    #- root carrier's link can't be mounted
-    loopback::carryRootCreateSymlink($part, $prefix);
-
-    log::l("isMounted=$part->{isMounted}, real_mntpoint=$part->{real_mntpoint}, mntpoint=$part->{mntpoint}");
-    if ($part->{isMounted} && $part->{real_mntpoint} && $part->{mntpoint}) {
-	log::l("remounting partition on $prefix$part->{mntpoint} instead of $part->{real_mntpoint}");
-	if ($::isInstall) { #- ensure partition will not be busy.
-	    require install_any;
-	    install_any::getFile('XXX');
-	}
-	eval {
-	    umount($part->{real_mntpoint});
-	    rmdir $part->{real_mntpoint};
-	    symlinkf "$prefix$part->{mntpoint}", $part->{real_mntpoint};
-	    delete $part->{real_mntpoint};
-	    $part->{isMounted} = 0;
-	};
-    }
-
-    return if $part->{isMounted};
-
-    unless ($::testing) {
-	if (isSwap($part)) {
-	    swap::swapon($part->{device});
-	} else {
-	    $part->{mntpoint} or die "missing mount point for partition $part->{device}";
-
-	    my $mntpoint = ($prefix || '') . $part->{mntpoint};
-	    if (isLoopback($part) || $part->{encrypt_key}) {
-		set_loop($part);
-	    } elsif (loopback::carryRootLoopback($part)) {
-		$mntpoint = "/initrd/loopfs";
-	    }
-	    my $dev = $part->{real_device} || $part->{device};
-	    mount($dev, $mntpoint, type2fs($part), $rdonly, $part->{options});
-	    rmdir "$mntpoint/lost+found";
-	}
-    }
-    $part->{isMounted} = $part->{isFormatted} = 1; #- assume that if mount works, partition is formatted
-}
-
-sub umount_part {
-    my ($part, $prefix) = @_;
-
-    $part->{isMounted} || $part->{real_mntpoint} or return;
-
-    unless ($::testing) {
-	if (isSwap($part)) {
-	    swap::swapoff($part->{device});
-	} elsif (loopback::carryRootLoopback($part)) {
-	    umount("/initrd/loopfs");
-	} else {
-	    umount(($prefix || '') . $part->{mntpoint} || devices::make($part->{device}));
-	    devices::del_loop(delete $part->{real_device}) if $part->{real_device};
-	}
-    }
-    $part->{isMounted} = 0;
-}
-
-sub mount_all($;$$) {
-    my ($fstab, $prefix) = @_;
-
-    #- TODO fsck, create check_mount_all ?
-    log::l("mounting all filesystems");
-
-    #- order mount by alphabetical ordre, that way / < /home < /home/httpd...
-    foreach (sort { $a->{mntpoint} cmp $b->{mntpoint} } grep { isSwap($_) || $_->{mntpoint} && isTrueFS($_) } @$fstab) {
-	mount_part($_, $prefix);
-    }
-}
-
-sub umount_all($;$) {
-    my ($fstab, $prefix) = @_;
-
-    log::l("unmounting all filesystems");
-
-    foreach (sort { $b->{mntpoint} cmp $a->{mntpoint} } @$fstab) {
-	$_->{mntpoint} and umount_part($_, $prefix);
-    }
-}
-
-################################################################################
-# various functions
-################################################################################
-sub df {
-    my ($part, $prefix) = @_;
-    my $dir = "/tmp/tmp_fs_df";
-
-    return $part->{free} if exists $part->{free};
-
-    if ($part->{isMounted}) {
-	$dir = ($prefix || '') . $part->{mntpoint};
-    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
-	return; #- won't even try!
-    } else {
-	mkdir $dir;
-	eval { mount($part->{device}, $dir, type2fs($part), 'readonly') };
-	if ($@) {
-	    $part->{notFormatted} = 1;
-	    $part->{isFormatted} = 0;
-	    unlink $dir;
-	    return;
-	}
-    }
-    my (undef, $free) = MDK::Common::System::df($dir);
-
-    if (!$part->{isMounted}) {
-	umount($dir);
-	unlink($dir)
-    }
-
-    $part->{free} = 2 * $free if defined $free;
-    $part->{free};
-}
-
-sub up_mount_point {
-    my ($mntpoint, $fstab) = @_;
-    while (1) {
-	$mntpoint = dirname($mntpoint);
-	$mntpoint ne "." or return;
-	$_->{mntpoint} eq $mntpoint and return $_ foreach @$fstab;
-    }
-}
-
-1;
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
deleted file mode 100644
index 5b700d387..000000000
--- a/perl-install/fsedit.pm
+++ /dev/null
@@ -1,741 +0,0 @@
-package fsedit; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%suggestions);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use fsedit;
-use devices;
-use loopback;
-use log;
-use fs;
-
-%suggestions = (
-  __("simple") => [
-    { mntpoint => "/",     size => 300 << 11, type =>0x483, ratio => 5, maxsize =>3500 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "/home", size => 300 << 11, type =>0x483, ratio => 3 },
-  ], __("with /usr") => [
-    { mntpoint => "/",     size => 150 << 11, type =>0x483, ratio => 1, maxsize => 500 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "/usr",  size => 300 << 11, type =>0x483, ratio => 4, maxsize =>3000 << 11 },
-    { mntpoint => "/home", size => 100 << 11, type =>0x483, ratio => 5 },
-  ], __("server") => [
-    { mntpoint => "/",     size => 150 << 11, type =>0x483, ratio => 1, maxsize => 250 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, type => 0x82, ratio => 2, maxsize => 400 << 11 },
-    { mntpoint => "/usr",  size => 300 << 11, type =>0x483, ratio => 3, maxsize =>3000 << 11 },
-    { mntpoint => "/var",  size => 100 << 11, type =>0x483, ratio => 4 },
-    { mntpoint => "/home", size => 100 << 11, type =>0x483, ratio => 5 },
-  ],
-);
-foreach (values %suggestions) {
-    if (arch() =~ /ia64/) {
-	@$_ = ({ mntpoint => "/boot/efi", size => 50 << 11, type => 0xb, ratio => 1, maxsize => 150 << 11 }, @$_);
-    }
-}
-
-my @suggestions_mntpoints = (
-    "/var/ftp", "/var/www", "/boot", '/tmp',
-    arch() =~ /sparc/ ? "/mnt/sunos" : arch() =~ /ppc/ ? "/mnt/macos" : "/mnt/windows",
-    #- RedHat also has /usr/local and /opt
-);
-
-my @partitions_signatures = (
-    [ 0x8e, 0, "HM\1\0" ],
-    [ 0x83, 0x438, "\x53\xEF" ],
-    [ 0x183, 0x10034, "ReIsErFs" ],
-    [ 0x183, 0x10034, "ReIsEr2Fs" ],
-    [ 0x283, 0, 'XFSB', 0x200, 'XAGF', 0x400, 'XAGI' ],
-    [ 0x383, 0x8000, 'JFS1' ],
-    [ 0x82, 4086, "SWAP-SPACE" ],
-    [ 0x82, 4086, "SWAPSPACE2" ],
-    [ 0x7,  0x1FE, "\x55\xAA", 0x3, "NTFS" ],
-    [ 0xc,  0x1FE, "\x55\xAA", 0x52, "FAT32" ],
-arch() !~ /^sparc/ ? (
-    [ 0x6,  0x1FE, "\x55\xAA", 0x36, "FAT" ],
-) : (),
-);
-
-sub typeOfPart { 
-    my $dev = devices::make($_[0]);
-    my $t = typeFromMagic($dev, @partitions_signatures);
-    if ($t == 0x83) {
-	#- there is no magic to differentiate ext3 and ext2. Using libext2fs
-	#- to check if it has a journal
-	$t = 0x483 if c::is_ext3($dev);
-    }
-    $t;
-}
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub empty_all_hds {
-    { hds => [], lvms => [], raids => [], loopbacks => [], raw_hds => [], nfss => [], smbs => [], special => [] };
-}
-sub recompute_loopbacks {
-    my ($all_hds) = @_;
-    my @fstab = get_all_fstab($all_hds);
-    @{$all_hds->{loopbacks}} = map { isPartOfLoopback($_) ? @{$_->{loopback}} : () } @fstab;
-}
-
-sub raids {
-    my ($hds) = @_;
-
-    my @parts = get_fstab(@$hds);
-    {
-	my @l = grep { isRawRAID($_) } @parts or return [];
-	detect_devices::raidAutoStart(@l);
-    }
-
-    fs::get_major_minor(@parts);
-    my %devname2part = map { $_->{dev} => { %$_, device => $_->{dev} } } read_partitions();
-
-    my @raids;
-    my @mdstat = cat_("/proc/mdstat");
-    for (my $i = 0; $i < @mdstat; $i++) {
-
-	my ($nb, $level, $mdparts) = 
-	  #- line format is:
-	  #- md%d : {in}?active{ (read-only)}? {linear|raid1|raid4|raid5}{ DEVNAME[%d]{(F)}?}*
-	  $mdstat[$i] =~ /^md(.).* ([^ \[\]]+) (\S+\[\d+\].*)/ or next;
-
-	$level =~ s/raid//; #- { linear | raid0 | raid1 | raid5 } -> { linear | 0 | 1 | 5 }
-
-	my $chunks = $mdstat[$i+1] =~ /(\S+) chunks/ ? $1 : "64k";
-
-	my @raw_mdparts = map { /([^\[]+)/ } split ' ', $mdparts;
-	my @mdparts = 
-	  map { 
-	      my $mdpart = $devname2part{$_} || { device => $_ };
-	      if (my ($part) = grep { is_same_hd($mdpart, $_) } @parts) {
-		  $part->{raid} = $nb;
-		  delete $part->{mntpoint};
-		  $part;
-	      } else {
-		  #- forget it when not found? that way it won't break much... beurk.
-		  ();
-	      }
-	  } @raw_mdparts;
-
-	my $type = typeOfPart("md$nb");
-	log::l("RAID: found md$nb (raid $level) chunks $chunks ", if_($type, "type $type "), "with parts ", join(", ", @raw_mdparts));
-	$raids[$nb] = { 'chunk-size' => $chunks, type => $type || 0x83, disks => \@mdparts,
-			device => "md$nb", notFormatted => !$type, level => $level };
-    }
-    require raid;
-    raid::update(@raids);
-    \@raids;
-}
-
-sub hds {
-    my ($drives, $flags) = @_;
-    my (@hds);
-    my $rc;
-
-    foreach (@$drives) {
-	my $file = devices::make($_->{device});
-
-	my $hd = partition_table_raw::get_geometry($file) or log::l("An error occurred while getting the geometry of block device $file: $!"), next;
-	add2hash_($hd, $_);
-	$hd->{file} = $file;
-	$hd->{prefix} = $hd->{device};
-	# for RAID arrays of format c0d0p1
-	$hd->{prefix} .= "p" if $hd->{prefix} =~ m,(rd|ida|cciss|ataraid)/,;
-
-	eval { partition_table::read($hd, $flags->{clearall} || member($_->{device}, @{$flags->{clear} || []})) };
-	if ($@) {
-	    cdie "ask_before_blanking:$@";
-	    partition_table_raw::zero_MBR($hd);
-	}
-	member($_->{device}, @{$flags->{clear} || []}) and partition_table::remove($hd, $_)
-	  foreach partition_table::get_normal_parts($hd);
-
-	# special case for Various type
-	$_->{type} = typeOfPart($_->{device}) || 0x100 foreach grep { $_->{type} == 0x100 } partition_table::get_normal_parts($hd);
-
-	#- special case for type overloading (eg: reiserfs is 0x183)
-	foreach (grep { isExt2($_) } partition_table::get_normal_parts($hd)) {
-	    my $type = typeOfPart($_->{device});
-	    $_->{type} = $type if $type > 0x100 || $type && $hd->isa('partition_table_gpt');
-	}
-	push @hds, $hd;
-    }
-    #- detect raids before LVM allowing LVM on raid
-    my $raids = raids(\@hds);
-    my $all_hds = { %{ empty_all_hds() }, hds => \@hds, lvms => [], raids => $raids };
-
-    my @lvms;
-    if (my @pvs = grep { isRawLVM($_) } get_all_fstab($all_hds)) {
-	#- otherwise vgscan won't find them
-	devices::make($_->{device}) foreach @pvs; 
-	require lvm;
-	foreach (@pvs) {
-	    my $name = lvm::get_vg($_) or next;
-	    my ($lvm) = grep { $_->{LVMname} eq $name } @lvms;
-	    if (!$lvm) {
-		$lvm = bless { disks => [], LVMname => $name }, 'lvm';
-		lvm::update_size($lvm);
-		lvm::get_lvs($lvm);
-		push @lvms, $lvm;
-	    }
-	    $_->{lvm} = $name;
-	    push @{$lvm->{disks}}, $_;
-	}
-    }
-    $all_hds->{lvms} = \@lvms;
-
-    fs::get_major_minor(get_all_fstab($all_hds));
-
-    $all_hds;
-}
-
-
-sub read_partitions() {
-    my (undef, undef, @all) = cat_("/proc/partitions");
-    grep {
-	$_->{size} != 1 &&	 # skip main extended partition
-	$_->{size} != 0x3fffffff # skip cdroms (otherwise stops cd-audios)
-    } map { 
-	my %l; 
-	@l{qw(major minor size dev)} = split; 
-	\%l;
-    } @all;
-}
-
-sub readProcPartitions {
-    my ($hds) = @_;
-
-    my @all = read_partitions();
-    my @parts = grep { $_->{dev} =~ /\d$/ } @all;
-    my @disks = grep { $_->{dev} !~ /\d$/ } @all;
-
-    my $devfs_like = grep { $_->{dev} =~ m|/disc$| } @disks;
-
-    my %devfs2normal = map {
-	my (undef, $major, $minor) = devices::entry($_->{device});
-	my ($disk) = grep { $_->{major} == $major && $_->{minor} == $minor } @disks;
-	$disk->{dev} => $_->{device};
-    } @$hds;
-
-    foreach my $part (@parts) {
-	my $dev;
-	if ($devfs_like) {
-	    $dev = -e "/dev/$part->{dev}" ? $part->{dev} : sprintf("0x%x%02x", $part->{major}, $part->{minor});
-	    $part->{rootDevice} = $devfs2normal{dirname($part->{dev}) . '/disc'};
-	} else {
-	    $dev = $part->{dev};
-	    foreach my $hd (@$hds) {
-		$part->{rootDevice} = $hd->{device} if $part->{dev} =~ /^$hd->{device}./;
-	    }
-	}
-	$part->{device} = $dev;
-	$part->{start} = 0;	# unknown, but we don't care
-	$part->{size} *= 2;	# from KB to sectors
-	$part->{type} = typeOfPart($dev); 
-
-	delete $part->{dev}; # cleanup
-    }
-    @parts;
-}
-
-sub all_hds {
-    my ($all_hds) = @_;
-    (@{$all_hds->{hds}}, @{$all_hds->{lvms}});
-}
-sub part2hd {
-    my ($part, $all_hds) = @_;
-    my ($hd) = grep { $part->{rootDevice} eq $_->{device} } all_hds($all_hds);
-    $hd;
-}
-
-sub is_same_hd {
-    my ($hd1, $hd2) = @_;
-    if ($hd1->{major} && $hd2->{major}) {
-	$hd1->{major} == $hd2->{major} && $hd1->{minor} == $hd2->{minor};
-    } else {
-	$hd1->{device} eq $hd2->{device};
-    }
-}
-
-sub is_same_part {
-    my ($part1, $part2) = @_;
-    foreach ('start', 'size', 'type', 'rootDevice') {
-	$part1->{$_} eq $part2->{$_} or return;
-    }
-    1;
-}
-
-#- get all normal partition including special ones as found on sparc.
-sub get_fstab {
-    map { partition_table::get_normal_parts($_) } @_;
-}
-
-#- get normal partition that should be visible for working on.
-sub get_visible_fstab {
-    grep { $_ && !partition_table::isWholedisk($_) && !partition_table::isHiddenMacPart($_) }
-      map { partition_table::get_normal_parts($_) } @_;
-}
-
-sub get_fstab_and_holes {
-    map {
-	if (isLVM($_)) {
-	    my @parts = partition_table::get_normal_parts($_);
-	    my $free = $_->{totalsectors} - sum map { $_->{size} } @parts;
-	    my $free_part = { start => 0, size => $free, type => 0, rootDevice => $_->{device} };
-	    @parts, if_($free >= $_->cylinder_size, $free_part);
-	} else {
-	    partition_table::get_normal_parts_and_holes($_);
-	}
-    } @_;
-}
-sub get_holes {
-    grep { $_->{type} == 0 } get_fstab_and_holes(@_);
-}
-
-sub get_all_fstab {
-    my ($all_hds) = @_;
-    my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    @parts, @raids, @{$all_hds->{loopbacks}};
-}
-sub get_really_all_fstab {
-    my ($all_hds) = @_;
-    my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    @parts, @raids, @{$all_hds->{loopbacks}}, @{$all_hds->{raw_hds}}, @{$all_hds->{nfss}}, @{$all_hds->{smbs}};
-}
-sub get_all_fstab_and_holes {
-    my ($all_hds) = @_;
-    my @raids = grep {$_} @{$all_hds->{raids}};
-    get_fstab_and_holes(all_hds($all_hds)), @raids, @{$all_hds->{loopbacks}};
-}
-sub get_all_holes {
-    my ($all_hds) = @_;
-    grep { $_->{type} == 0 } get_all_fstab_and_holes($all_hds);
-}
-
-sub all_free_space {
-    my ($all_hds) = @_;
-    sum map { $_->{size} } get_all_holes($all_hds);
-}
-sub free_space {
-    sum map { $_->{size} } get_holes(@_);
-}
-
-sub is_one_big_fat {
-    my ($hds) = @_;
-    @$hds == 1 or return;
-
-    my @l = get_fstab(@$hds);
-    @l == 1 && isFat($l[0]) && free_space(@$hds) < 10 << 11;
-}
-
-sub file2part {
-    my ($prefix, $fstab, $file, $keep_simple_symlinks) = @_;    
-    my $part;
-
-    $file = $keep_simple_symlinks ? common::expand_symlinks_but_simple("$prefix$file") : expand_symlinks("$prefix$file");
-    unless ($file =~ s/^$prefix//) {
-	my ($part) = grep { loopback::carryRootLoopback($_) } @$fstab or die;
-	log::l("found $part->{mntpoint}");
-	$file =~ s|/initrd/loopfs|$part->{mntpoint}|;
-    }
-    foreach (@$fstab) {
-	my $m = $_->{mntpoint};
-	$part = $_ if 
-	  $file =~ /^\Q$m/ && 
-	    (!$part || length $part->{mntpoint} < length $m);
-    }
-    $part or die "file2part: not found $file";
-    $file =~ s|$part->{mntpoint}/?|/|;
-    ($part, $file);
-}
-
-
-sub computeSize {
-    my ($part, $best, $all_hds, $suggestions) = @_;
-    my $max = $part->{maxsize} || $part->{size};
-    return min($max, $best->{size}) unless $best->{ratio};
-
-    my $free_space = all_free_space($all_hds);
-    my @l = my @L = grep { 
-	if (!has_mntpoint($_->{mntpoint}, $all_hds) && $free_space >= $_->{size}) {
-	    $free_space -= $_->{size};
-	    1;
-	} else { 0 } } @$suggestions;
-
-    my $tot_ratios = 0;
-    while (1) {
-	my $old_free_space = $free_space;
-	my $old_tot_ratios = $tot_ratios;
-
-	$tot_ratios = sum(map { $_->{ratio} } @l);
-	last if $tot_ratios == $old_tot_ratios;
-
-	@l = grep { 
-	    if ($_->{ratio} && $_->{maxsize} && $tot_ratios &&
-		$_->{size} + $_->{ratio} / $tot_ratios * $old_free_space >= $_->{maxsize}) {
-		return min($max, $best->{maxsize}) if $best->{mntpoint} eq $_->{mntpoint};
-		$free_space -= $_->{maxsize} - $_->{size};
-		0;
-	    } else {
-		$_->{ratio};
-	    } 
-	} @l;
-    }
-    my $size = int min($max, $best->{size} + $free_space * ($tot_ratios && $best->{ratio} / $tot_ratios));
-    #- verify other entry can fill the hole
-    if (grep { $_->{size} < $max - $size } @L) { $size } else { $max }
-}
-
-sub suggest_part {
-    my ($part, $all_hds, $suggestions) = @_;
-    $suggestions ||= $suggestions{server} || $suggestions{simple};
-
-    my $has_swap = grep { isSwap($_) } get_all_fstab($all_hds);
-
-    my ($best, $second) =
-      grep { !$_->{maxsize} || $part->{size} <= $_->{maxsize} }
-      grep { $_->{size} <= ($part->{maxsize} || $part->{size}) }
-      grep { !has_mntpoint($_->{mntpoint}, $all_hds) || isSwap($_) && !$has_swap }
-      grep { !$_->{hd} || $_->{hd} eq $part->{rootDevice} }
-      grep { !$part->{type} || $part->{type} == $_->{type} || isTrueFS($part) && isTrueFS($_) }
-	@$suggestions or return;
-
-#-    if (arch() =~ /i.86/) {
-#-	  $best = $second if
-#-	    $best->{mntpoint} eq '/boot' &&
-#-	    $part->{start} + $best->{size} > 1024 * $hd->cylinder_size(); #- if the empty slot is beyond the 1024th cylinder, no use having /boot
-#-    }
-
-    defined $best or return; #- sorry no suggestion :(
-
-    $part->{mntpoint} = $best->{mntpoint};
-    $part->{type} = $best->{type} if !(isTrueFS($best) && isTrueFS($part));
-    $part->{size} = computeSize($part, $best, $all_hds, $suggestions);
-    $part->{options} = $best->{options} if $best->{options};
-    1;
-}
-
-sub suggestions_mntpoint {
-    my ($all_hds) = @_;
-    sort grep { !/swap/ && !has_mntpoint($_, $all_hds) }
-      (@suggestions_mntpoints, map { $_->{mntpoint} } @{$suggestions{server} || $suggestions{simple}});
-}
-
-#-sub partitionDrives {
-#-
-#-    my $cmd = "/sbin/fdisk";
-#-    -x $cmd or $cmd = "/usr/bin/fdisk";
-#-
-#-    my $drives = findDrivesPresent() or die "You don't have any hard drives available! You probably forgot to configure a SCSI controller.";
-#-
-#-    foreach (@$drives) {
-#-	 my $text = "/dev/" . $_->{device};
-#-	 $text .= " - SCSI ID " . $_->{id} if $_->{device} =~ /^sd/;
-#-	 $text .= " - Model " . $_->{info};
-#-	 $text .= " array" if $_->{device} =~ /^c.d/;
-#-
-#-	 #- truncate at 50 columns for now
-#-	 $text = substr $text, 0, 50;
-#-    }
-#-    #-TODO TODO
-#-}
-
-
-sub mntpoint2part {
-    my ($mntpoint, $fstab) = @_;
-    first(grep { $mntpoint eq $_->{mntpoint} } @$fstab);
-}
-sub has_mntpoint {
-    my ($mntpoint, $all_hds) = @_;
-    mntpoint2part($mntpoint, [ get_really_all_fstab($all_hds) ]);
-}
-sub get_root_ {
-    my ($fstab, $boot) = @_;
-    $boot && mntpoint2part("/boot", $fstab) || mntpoint2part("/", $fstab);
-}
-sub get_root { &get_root_ || {} }
-
-#- do this before modifying $part->{type}
-sub check_type {
-    my ($type, $hd, $part) = @_;
-    isThisFs("jfs", { type => $type }) && $part->{size} < 16 << 11 and die _("You can't use JFS for partitions smaller than 16MB");
-    isThisFs("reiserfs", { type => $type }) && $part->{size} < 32 << 11 and die _("You can't use ReiserFS for partitions smaller than 32MB");
-}
-
-sub package_needed_for_partition_type {
-    my ($part) = @_;
-    my %l = (
-	reiserfs => 'reiserfsprogs',
-	xfs => 'xfsprogs',
-        jfs => 'jfsprogs',
-    );
-    $l{type2fs($part)};
-}
-
-#- do this before modifying $part->{mntpoint}
-#- $part->{mntpoint} should not be used here, use $mntpoint instead
-sub check_mntpoint {
-    my ($mntpoint, $hd, $part, $all_hds) = @_;
-
-    $mntpoint eq '' || isSwap($part) || isNonMountable($part) and return;
-    $mntpoint =~ m|^/| or die _("Mount points must begin with a leading /");
-    $mntpoint ne $part->{mntpoint} && has_mntpoint($mntpoint, $all_hds) and die _("There is already a partition with mount point %s\n", $mntpoint);
-
-    die "raid / with no /boot" 
-      if $mntpoint eq "/" && isRAID($part) && !has_mntpoint("/boot", $all_hds);
-    die _("You can't use a LVM Logical Volume for mount point %s", $mntpoint)
-      if ($mntpoint eq '/' || $mntpoint eq '/boot') && isLVM($hd);
-    die _("This directory should remain within the root filesystem")
-      if member($mntpoint, qw(/bin /dev /etc /lib /sbin /root /mnt));
-    die _("You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n")
-      if !isTrueFS($part) && member($mntpoint, qw(/ /home /tmp /usr /var));
-    die _("You can't use an encrypted file system for mount point %s", $mntpoint)
-      if $part->{options} =~ /encrypted/ && member($mntpoint, qw(/ /usr /var));
-
-    local $part->{mntpoint} = $mntpoint;
-    loopback::check_circular_mounts($hd, $part, $all_hds);
-}
-
-sub check {
-    my ($hd, $part, $all_hds) = @_;
-    check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
-    check_type($part->{type}, $hd, $part);
-}
-
-sub add {
-    my ($hd, $part, $all_hds, $options) = @_;
-
-    isSwap($part) ?
-      ($part->{mntpoint} = 'swap') :
-      $options->{force} || check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
-
-    delete $part->{maxsize};
-
-    if (isLVM($hd)) {
-	lvm::lv_create($hd, $part);
-    } else {
-	partition_table::add($hd, $part, $options->{primaryOrExtended});
-    }
-}
-
-sub allocatePartitions {
-    my ($all_hds, $to_add) = @_;
-
-    foreach my $part (get_all_holes($all_hds)) {
-	my ($start, $size, $dev) = @$part{"start", "size", "rootDevice"};
-	my $part;
-	while (suggest_part($part = { start => $start, size => 0, maxsize => $size, rootDevice => $dev }, 
-			    $all_hds, $to_add)) {
-	    my ($hd) = fsedit::part2hd($part, $all_hds);
-	    add($hd, $part, $all_hds);
-	    $size -= $part->{size} + $part->{start} - $start;
-	    $start = $part->{start} + $part->{size};
-	}
-    }
-}
-
-sub auto_allocate {
-    my ($all_hds, $suggestions) = @_;
-    my $before = listlength(fsedit::get_all_fstab($all_hds));
-
-    my $suggestions_ = $suggestions || $suggestions{simple};
-    allocatePartitions($all_hds, $suggestions_);
-    auto_allocate_raids($all_hds, $suggestions) if $suggestions;
-
-    partition_table::assign_device_numbers($_) foreach @{$all_hds->{hds}};
-
-    if ($before == listlength(fsedit::get_all_fstab($all_hds))) {
-	# find out why auto_allocate failed
-	if (my @l = grep { !has_mntpoint($_->{mntpoint}, $all_hds) } @$suggestions_) {
-	    die _("Not enough free space for auto-allocating");
-	} else {
-	    die _("Nothing to do");
-	}
-    }
-}
-
-sub auto_allocate_raids {
-    my ($all_hds, $suggestions) = @_;
-
-    my @raids = grep { isRawRAID($_) } get_all_fstab($all_hds) or return;
-    if (@raids) {
-	require raid;
-	my @mds = grep { $_->{hd} =~ /md/ } @$suggestions;
-	foreach my $md (@mds) {
-	    my @raids_ = grep { !$md->{parts} || $md->{parts} =~ /\Q$_->{mntpoint}/ } @raids;
-	    @raids = difference2(\@raids, \@raids_);
-	    my $nb = raid::new($all_hds->{raids}, @raids_);
-	    my $part = $all_hds->{raids}[$nb];
-
-	    my %h = %$md;
-	    delete @h{'hd', 'parts'};
-	    put_in_hash($part, \%h); # mntpoint, level, chunk-size, type
-	    raid::updateSize($part);
-	}
-    }
-}
-
-sub undo_prepare {
-    my ($all_hds) = @_;
-    require Data::Dumper;
-    $Data::Dumper::Purity = 1;
-    foreach (@{$all_hds->{hds}}) {
-	my @h = @{$_}{@partition_table::fields2save};
-	push @{$_->{undo}}, Data::Dumper->Dump([\@h], ['$h']);
-    }
-}
-sub undo {
-    my ($all_hds) = @_;
-    foreach (@{$all_hds->{hds}}) {
-	my $h; eval pop @{$_->{undo}} || next;
-	@{$_}{@partition_table::fields2save} = @$h;
-
-	$_->{isDirty} = $_->{needKernelReread} = 1 if $_->{hasBeenDirty};
-    }
-    
-}
-
-sub move {
-    my ($hd, $part, $hd2, $sector2) = @_;
-
-    die 'TODO'; # doesn't work for the moment
-    my $part1 = { %$part };
-    my $part2 = { %$part };
-    $part2->{start} = $sector2;
-    $part2->{size} += $hd2->cylinder_size() - 1;
-    partition_table::remove($hd, $part);
-    {
-	local ($part2->{notFormatted}, $part2->{isFormatted}); #- do not allow partition::add to change this
-	partition_table::add($hd2, $part2);
-    }
-
-    return if $part2->{notFormatted} && !$part2->{isFormatted} || $::testing;
-
-    local (*F, *G);
-    sysopen F, $hd->{file}, 0 or die '';
-    sysopen G, $hd2->{file}, 2 or die _("Error opening %s for writing: %s", $hd2->{file}, "$!");
-
-    my $base = $part1->{start};
-    my $base2 = $part2->{start};
-    my $step = 10;
-    if ($hd eq $hd2) {
-	$base == $base2 and return;
-	$step = min($step, abs($base2 - $base));
-
-	if ($base < $base2) {
-	    $base  += $part1->{size} - $step;
-	    $base2 += $part1->{size} - $step;
-	    $step = -$step;
-	}
-    }
-
-    my $f = sub {
-	$base  < 0 and $base2 += -$base,  $base  = 0;
-	$base2 < 0 and $base  += -$base2, $base2 = 0;
-	c::lseek_sector(fileno(F), $base,  0) or die "seeking to sector $base failed on drive $hd->{device}";
-	c::lseek_sector(fileno(G), $base2, 0) or die "seeking to sector $base2 failed on drive $hd2->{device}";
-
-	my $buf;
-	sysread F, $buf, $SECTORSIZE * abs($_[0]) or die '';
-	syswrite G, $buf;
-    };
-
-    for (my $i = 0; $i < $part1->{size} / abs($step); $i++, $base += $step, $base2 += $step) {
-	print "$base $base2\n";
-	&$f($step);
-    }
-    if (my $v = ($part1->{size} % abs($step)) * sign($step)) {
-	$base += $v;
-	$base2 += $v;
-	&$f($v);
-    }
-}
-
-sub change_type {
-    my ($type, $hd, $part) = @_;
-    $type != $part->{type} or return;
-    check_type($type, $hd, $part);
-    $hd->{isDirty} = 1;
-    $part->{mntpoint} = '' if isSwap($part) && $part->{mntpoint} eq "swap";
-    $part->{mntpoint} = '' if isRawLVM({ type => $type }) || isRawRAID({ type => $type });
-    $part->{type} = $type;
-    $part->{notFormatted} = 1;
-    $part->{isFormatted} = 0;    
-}
-
-sub rescuept($) {
-    my ($hd) = @_;
-    my ($ext, @hd);
-
-    my $dev = devices::make($hd->{device});
-    local *F; open F, "rescuept $dev|";
-    local $_;
-    while (<F>) {
-	my ($st, $si, $id) = /start=\s*(\d+),\s*size=\s*(\d+),\s*Id=\s*(\d+)/ or next;
-	my $part = { start => $st, size => $si, type => hex($id) };
-	if (isExtended($part)) {
-	    $ext = $part;
-	} else {
-	    push @hd, $part;
-	}
-    }
-    close F or die "rescuept failed";
-
-    partition_table_raw::zero_MBR($hd);
-    foreach (@hd) {
-	my $b = partition_table::verifyInside($_, $ext);
-	if ($b) {
-	    $_->{start}--;
-	    $_->{size}++;
-	}
-	local $_->{notFormatted};
-
-	partition_table::add($hd, $_, ($b ? 'Extended' : 'Primary'), 1);
-    }
-}
-
-sub verifyHds {
-    my ($hds, $readonly, $ok) = @_;
-
-    if (is_empty_array_ref($hds)) { #- no way
-	die _("An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem");
-    }
-
-    my @parts = readProcPartitions($hds);
-    foreach my $hd (@$hds) {
-	my @l1 = partition_table::get_normal_parts($hd);
-	my @l2 = grep { $_->{rootDevice} eq $hd->{device} } @parts;
-	if (int(@l1) != int(@l2) && arch() ne 'ppc') {
-	    log::l(sprintf
-		   "/proc/partitions doesn't agree with drakx %d != %d:\n%s\n", int(@l1), int(@l2),
-		   "/proc/partitions: " . join(", ", map { "$_->{device} ($_->{rootDevice})" } @parts));
-	    $ok = 0;
-	}
-    }
-
-    if ($readonly && !$ok) {
-	log::l("using /proc/partitions as diskdrake failed :(");
-	foreach my $hd (@$hds) {
-	    partition_table_raw::zero_MBR($hd);
-	    $hd->{primary} = { normal => [ grep { $hd->{device} eq $_->{rootDevice} } @parts ] };
-	}
-	$ok = 1;
-    }
-    $readonly && get_fstab(@$hds) == 0 and die _("You don't have any partitions!");
-    $ok;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/ftp.pm b/perl-install/ftp.pm
deleted file mode 100644
index 20b837b8c..000000000
--- a/perl-install/ftp.pm
+++ /dev/null
@@ -1,84 +0,0 @@
-package ftp; # $Id$
-
-use Net::FTP;
-
-use network;
-use log;
-
-my %hosts;
-
-1;
-
-sub fromEnv() {
-    #- now URLPREFIX is generated from what is given by mdk-stage1 which is only this 4 variables.
-    $ENV{URLPREFIX} = "ftp://" . ($ENV{LOGIN} && ("$ENV{LOGIN}" . ($ENV{PASSWORD} && ":$ENV{PASSWORD}") . '@')) .
-      "$ENV{HOST}/$ENV{PREFIX}";
-    @ENV{qw(HOST PREFIX LOGIN PASSWORD)};
-}
-
-sub new {
-    my ($host, $prefix, $login, $password) = @_;
-    my @l = do { if ($hosts{"$host$prefix"}) {
-	@{$hosts{"$host$prefix"}};
-    } else {
-	my %options = (Passive => 1, Timeout => 60, Port => 21);
-	$options{Firewall} = $ENV{PROXY} if $ENV{PROXY};
-	$options{Port} = $ENV{PROXYPORT} if $ENV{PROXYPORT};
-	unless ($login) {
-	    $login = 'anonymous';
-	    $password = '-drakx@';
-	}
-
-	my $ftp;
-	foreach (1..10) {
-	    $ftp = Net::FTP->new(network::resolv($host), %options) or die;
-	    $ftp && $ftp->login($login, $password) and last;
-
-	    log::l("ftp login failed, sleeping before trying again");
-	    sleep 5 * $_;
-	}
-	$ftp or die "unable to open ftp connection to $host";
-	$ftp->binary;
-	$ftp->cwd($prefix);
-
-	my @l = ($ftp, \ (my $retr = undef));
-	$hosts{"$host$prefix"} = \@l;
-	@l;
-    }};
-    wantarray ? @l : $l[0];
-}
-
-sub getFile {
-    my ($f, @para) = @_;
-    $f eq 'XXX' and rewindGetFile(), return; #- special case to force closing connection.
-    foreach (1..3) {
-	my ($ftp, $retr) = new(@para ? @para : fromEnv);
-	$$retr->close if $$retr;
-	$$retr = $ftp->retr($f) and return $$retr;
-	($ftp->code == 550) and log::l("FTP: 550 file unavailable"), return;
-	rewindGetFile();
-	log::l("ftp get failed, sleeping before trying again");
-	sleep 1;
-    }
-}
-
-#-sub closeFiles() {
-#-    #- close any existing connections
-#-    foreach (values %hosts) {
-#-	  my $retr = $_->[1] if ref $_;
-#-	  $$retr->close if $$retr;
-#-	  undef $$retr;
-#-    }
-#-}
-
-sub rewindGetFile() {
-    #- close any existing connection.
-    foreach (values %hosts) {
-	my ($ftp, $retr) = @{$_ || []};
-	$$retr->close if $$retr;
-	$ftp->close() if $ftp;
-    }
-
-    #- make sure to reconnect to server.
-    %hosts = ();
-}
diff --git a/perl-install/g_auto_install b/perl-install/g_auto_install
deleted file mode 100755
index dd7655ee5..000000000
--- a/perl-install/g_auto_install
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/usr/bin/perl
-
-my $dir = `pwd`;
-chomp $dir;
-$dir .= "/../../..";
-
-#- avoid polluting environment with specific locales.
-delete $ENV{$_} foreach qw(LC_MONETARY LC_CTYPE LC_NUMERIC LC_MESSAGES LC_TIME LC_COLLATE LANGUAGE LANG RPM_INSTALL_LANG);
-
-if ($ENV{DISPLAY}) {
-    system "xset", "+fp", "$dir/usr/X11R6/lib/X11/fonts/";
-    system "xset", "fp", "rehash";
-}
-
-#- perl version of the install, we use directly the version we found,
-#- this means there SHOULD BE no module compiled for an older version of perl
-#- which will be used by DrakX.
-my ($version, $arch) = (glob "$dir/usr/lib/perl5/*/*/CORE/libperl.so")[0] =~ m|$dir/usr/lib/perl5/([^/]*)/([^/]*)/CORE/libperl.so|;
-
-#- keep it mind the ELF loader to use.
-$ENV{LD_LOADER} = "$dir/lib/ld-linux.so.2";
-
-$ENV{LOCPATH}="$dir/usr/share/locale";
-$ENV{GCONV_PATH}="$dir/usr/lib/gconv";
-$ENV{PERL5LIB} = join ":", map { "$dir/usr/lib/perl5/$_" } ("$version/$arch",
-							    "$version",
-							    "site_perl/$version/$arch",
-							    "site_perl/$version",
-							    "site_perl");
-$ENV{LD_LIBRARY_PATH} = "$dir/usr/bin:$dir/bin:$dir/sbin:$dir/usr/sbin:$dir/usr/X11R6/bin:$dir/lib:$dir/usr/lib:$dir/usr/lib/perl5/$version/$arch/CORE";
-$ENV{PATH} = join(":", map { "$dir/$_" } split ":", "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin") . ":$ENV{PATH}";
-$ENV{SHARE_PATH} = "$dir/usr/share";
-$ENV{RPMRC_FILE} = "$dir/usr/lib/rpm/rpmrc";
-$ENV{GTK_DATA_PREFIX} = "$dir/usr";
-$ENV{GTK_EXE_PREFIX} = "$dir/usr";
-$ENV{GDK_IMLIB_PATH} = "$dir/usr/lib";
-
-system $ENV{LD_LOADER}, "../perl", "./install2", "--g_auto_install", @ARGV;
-
-#- at this point, unwind above else they will not run correctly (wrong ld-linux.so.2)
-delete $ENV{GTK_EXE_PREFIX};
-delete $ENV{RPMRC_FILE};
-delete $ENV{LOCPATH};
-delete $ENV{SHARE_PATH};
-delete $ENV{PATH};
-delete $ENV{LD_LIBRARY_PATH};
-delete $ENV{PERL5LIB};
-delete $ENV{LD_LOADER};
-
-if ($ENV{DISPLAY}) {
-    system "xset", "-fp", "$dir/usr/X11R6/lib/X11/fonts/";
-    system "xset", "fp", "rehash";
-}
diff --git a/perl-install/harddrake/TODO b/perl-install/harddrake/TODO
deleted file mode 100644
index fb923790d..000000000
--- a/perl-install/harddrake/TODO
+++ /dev/null
@@ -1,170 +0,0 @@
--*- outline -*-
-
-* Harddrake TODO:
-** fixes
-*** IDE, SCSI: bus => bus_id, bus="IDE/SCSI" => move into DrakX
-*** SCSI: get vendor string
-*** timeout on dialogs in service
-*** initscript run harddrake service redirected to /dev/null :-(
-*** mouse.pm: only probe serial if :
-**** serial mouse previously detected
-**** no non-serial mouse found
-
-** wishes
-*** move all drakx tools into just a small one-liner that uses real <tool>.pm
-    so that harddrake and mcc reduces their memory usage pattern and
-    be faster (the next fast step will be to use perl6/parrot)
-*** non needed stuff to run X must be posponed after X11 startup
-**** eg: scanner/audio/printer/floppy/cdrom/tape/tv/webcam/joystick/ ... 
-**** different modes:
-***** neuneu => automatic config in service (ie for mouse/video card/...)
-***** expert => run config tools
-
-*** mode neuneu/expert => automatic/tools
-
-** voir dadou -> interface
-
-** missing
-*** check4modem
-*** config module (module options configuration button) => expert only
-*** mode expert => oui/non (cf dadou)
-*** add updfstab
-*** make all drakx tools a simple one-liner that call right module so that
-    harddrake2 and mcc can load these tools without more ram eater
-*** enable the user to force a module (isa, isapnp, ...)
-*** detect pcimcia:
-  	
-    foreach (detect_devices::pcmcia_probe()) {
-        printf "m: %-15s t: %-20s d: %-12s  d: %s\n",
-              $_->{driver}, $_->{type}, $_->{device}, $_->{description}
-    }
-
-
-** ensure scannerdrake use is ok (=> yvounet)
-
-* Postponed
-** use fbgtk+2 when booting on fbcon for smoother GUI
-*** pixel, convert perl-GTK to gtk+2 :-)
-
-** for to send a message for unknown hardware to install@mandrakesoft.com
-*** use drakbugreport ?
-
-    Subject: [UNKNOW HARDWARE] or a new other ml
-        -> do you konw how to configure it under linux ?
-        -> description
-
-
-
-* / no hope / useless :
-** Once we've swtiched to perl-5.8, consider doing:
-    use Storable;
-    retrieve %oldconfig
-    store %config, $previous_conf;
-
-** enable a string to be passed as detector; in that case, do ourself the =~
-** alter detect_devices in order to only probe one time
-** detect *ALL* mouses if more than one (mousedrake?)
-
-**  in Mandrake 9.0 :
-
-    "Mass storage" => (Floppy,
-				   Disk,
-				   Cdrom,
-				   Tape)
-
-    "Network" => (Ethernetcard,
-			   Modem,
-			   Isdn)
-    "Multimedia" => (Videocard,
-				 Tvcard,
-				 Soundcard,
-				 Webcam)
-    "System" => (Bridge,
-			  Cpu,
-			  Memory)
-
-
-    "Publishing" => (Printer,
-				 Scanner)
-
-    "Pointing" => (Mouse,
-			    Joystick)
-
-    "Buses" => (Ideinterface,
-			 Scsiinterface,
-			 Usbinterface,
-			 );
-
-    "Unknown/Others",
-
-
-* Suggestion
-Subject: Re: [Cooker] Optional ALSA Support for SB Live!
-From: Fabrice FACORAT <f.faber@netcourrier.com>
-To: cooker@linux-mandrake.com
-In-Reply-To: <m2ofhvtpaq.fsf@vador.mandrakesoft.com>
-References: <20020311051222.47DC087CA5@yavin.mandrax.org> 
-	<m2ofhvtpaq.fsf@vador.mandrakesoft.com>
-Date: 11 Mar 2002 11:12:31 +0100
-Message-Id: <1015841551.3895.31.camel@bastard.localdomain>
-
-Le lun 11/03/2002 à 10:41, Thierry Vignaud a écrit :
- 
-> >   In Mandrake 8.1 rerunning Harddrake post-setup would switch over
-> > to ALSA (which supports MIDI synth), however in 8.2 the only way to
-> > get ALSA support is to manually edit the modules.conf file. This
-> > would be disasterous for someone who isn't familar with
-> > modules.conf, but had been instructed on the mandrake-expert/newbie
-> > lists (as many had been) to simply rerun Harddrake on the sound card
-> > to get ALSA (and hence MIDI synth support).
-> 
-> give me the result of lspcidrake -f -v so that i switch your card
-> from oss to alsa.
-
-no please.
-just one month ago you switch SBLive from Alsa to OSS ( cause drakX
-set it as OSS and harddrake as Alsa ).
-There were also a discussion concerning the fact that Alsa doesn't
-support emu-tools and so all available options.
-Last but not least, several peoples report pbs with Alsa ( is sound is
-too high you have disturbances ). So someone is going to ask you for
-OSS as it want to use some features os SBLive, etc ...
-
-To my mind the best way for this ( but too late for 8.2 ) will be to
-have a tool called soundrake. Thanks to this tools, you choose at the
-beginning if you want to use OSS or alsa and then try to correctly
-configure your sound card. This tool should be able to work in
-embended mo in harddrake or harddrake2 ( infos concerning this so long
-awaiting harddrake 2 ? ).
-
-In order to make this tool be a perfect tool, it should be able to
-advice user concerning the advantage and the disadvantage of each
-driver ( indeed alsa sometimes is better than OSS as it support full
-duplex and wave mixing on more sound cards ).
-It's also disturbing is harddrake set alsa by default and XrakX set
-OSS by default as sometimes by lanching harddrake ( just to see what
-happen ) you lose ( or seems to lose ) your sound card ( mute mixer )
-
-For example :
-+ launch harddrake
-+ use autodetection : yes/no
-+ if auto detects enable, it detects a SBLive.
-+ explanations text concerning the fact that :
-   if I use OSS I will be able to use sounds effects, live drive and
-others things ( AC-3 passthrough ) thanks to the emu10k1-tools packages
-( available on CD sets and installable via Software Manager )
-   if I use Alsa, I won't be able to use emu10k1-tools but at the
-contrary I will be able to use midi software as alsa module support midi
-+ ask user which one he wants to use : OSS / Alsa ?
-+ set the sound card drivers and modules.conf according to user wishes
-+ <mode= dream> if I select OSS, installed emu10k1-tools and provide a
-GUI to configure them </mode = dream>
-+ <mode= dream> if I select Alsa unmute at least PCM and Vol or display
-a warning saying that by default Alsa mute everything ( configure alsa
-service so that it save mixer settings )
-+ test the sound ( mandrake sound theme )
-+ do you hear something ?
-+ yes -> your sound card have been properly set.
-+ if no -> try the others drivers set or send lspcidrake -v to
-somebody@somewhere.org to check for support for your sound card
-+ Do you ahave another sound card ?
diff --git a/perl-install/harddrake/data.pm b/perl-install/harddrake/data.pm
deleted file mode 100644
index bff9c42f8..000000000
--- a/perl-install/harddrake/data.pm
+++ /dev/null
@@ -1,70 +0,0 @@
-package harddrake::data;
-
-use strict;
-use detect_devices;
-use MDK::Common;
-use class_discard;
-
-our (@ISA, @EXPORT_OK) = (qw(Exporter), (qw(version tree)));
-our ($version, $sbindir, $bindir) = ("1.1.5", "/usr/sbin", "/usr/bin");
-
-# Update me each time you handle one more devices class (aka configurator)
-sub unknown {
-    grep { $_->{media_type} !~ /tape|DISPLAY|MULTIMEDIA_VIDEO|BRIDGE|NETWORK|MULTIMEDIA_AUDIO/ } detect_devices::probeall(1);
-}
-
-
-# tree format ("CLASS_ID", "type", "type_icon", configurator, detect_sub)
-# NEVER, NEVER alter CLASS_ID or you'll harddrake2 service to detect changes
-# in hw configuration ... :-(
-
-my @devices = detect_devices::probeall(1);
-
-our @tree =
-    (
-	["FLOPPY","Floppy", "floppy.png", "",\&detect_devices::floppies],
-	["HARDDISK","Disk", "harddisk.png", "$sbindir/diskdrake", \&detect_devices::hds],
-	["CDROM","Cdrom", "cd.png", "", \&detect_devices::cdroms],
-	["TAPE","Tape", "tape.png", "", \&detect_devices::tapes],
-#	["CDBURNER","Cd burners", "cd.png", "", \&detect_devices::burners],
-
-	["VIDEO","Videocard", "video.png", "$sbindir/XFdrake", 
-	 sub {grep { $_->{driver} =~ /^(Card|Server):/ || $_->{media_type} =~ 'DISPLAY_VGA' } @devices }],
-	["TV","Tvcard", "tv.png", "/usr/bin/XawTV", 
-	 sub {grep { $_->{media_type} =~ 'MULTIMEDIA_VIDEO' } @devices}],
-	["AUDIO","Soundcard", "sound.png", "$bindir/aumix", 
-	 sub {grep { $_->{media_type} =~ 'MULTIMEDIA_AUDIO' } @devices}],
-#	"MULTIMEDIA_AUDIO" => "/usr/bin/X11/sounddrake";
-	["WEBCAM","Webcam", "webcam.png", "", sub {}],
-	["ETHERNET","Ethernetcard", "hw_network.png", "$sbindir/draknet", sub {
-	    #- generic NIC detection for USB seems broken (class, subclass, 
-	    #- protocol report are not accurate) so I'll need to verify against
-	    #- known drivers :-(
-	    my @usbnet = qw/CDCEther catc kaweth pegasus usbnet/;
-	    # should be taken from detect_devices.pm or modules.pm. it's identical
-	    
-	    grep { $_->{media_type} =~ /^NETWORK/ || member($_->{driver}, @usbnet) } @devices}],
-#	["","Tokenring cards", "Ethernetcard.png", "", \&detect_devices::getNet],
-#	["","FDDI cards", "Ethernetcard.png", "", \&detect_devices::getNet],
-#	["","Modem", "Modem.png", "", \&detect_devices::getNet],
-#	["","Isdn", "", "", \&detect_devices::getNet]
-
-	["BRIDGE","Bridge", "memory.png", "", sub {grep { $_->{media_type} =~ 'BRIDGE' } @devices}],
-# 	["","Cpu", "cpu.png", "", sub {}],
-#	["","Memory", "memory.png", "", sub {}],
-	["UNKNOWN","Unknown/Others", "unknown.png", "" , \&unknown],
-
-	["PRINTER","Printer", "hw_printer.png", "$sbindir/printerdrake", 
-	 sub { require printerdrake; printerdrake::auto_detect(class_discard->new)  } ],
-	["SCANNER","Scanner", "scanner.png", "$sbindir/scannerdrake",
-	 sub { require scanner; scanner::findScannerUsbport() }],
-	["MOUSE","Mouse", "hw_mouse.png", "$sbindir/mousedrake", sub { require mouse; &mouse::detect()}],
-	["JOYSTICK","Joystick", "joystick.png", "", sub {}]
-
-#	["","Ideinterface", "Ideinterface.png", "", "STORAGE_IDE"],
-#	["","Scsiinterface", "Scsiinterface.png", "", \&detect_devices::getSCSI],
-#	["","Usbinterface", "Usbinterface.png", "", \&detect_devices::usb_probe]
-	);
-
-
-1;
diff --git a/perl-install/harddrake/ui.pm b/perl-install/harddrake/ui.pm
deleted file mode 100644
index d95731148..000000000
--- a/perl-install/harddrake/ui.pm
+++ /dev/null
diff --git a/perl-install/help.pm b/perl-install/help.pm
deleted file mode 100644
index 283f4464c..000000000
--- a/perl-install/help.pm
+++ /dev/null
@@ -1,903 +0,0 @@
-package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated 
-#            from the manuals !!! 
-#            Write a mail to <documentation@mandrakesoft.com> if
-#            you want it changed.
-
-%steps = (
-empty => '',
-
-addUser => 
-__("GNU/Linux is a multiuser system, and this means that each user can have his
-own preferences, his own files and so on. You can read the ``User Guide''
-to learn more. But unlike \"root\", which is the administrator, the users
-you will add here will not be entitled to change anything except their own
-files and their own configuration. You will have to create at least one
-regular user for yourself. That account is where you should log in for
-routine use. Although it is very practical to log in as \"root\" everyday,
-it may also be very dangerous! The slightest mistake could mean that your
-system would not work any more. If you make a serious mistake as a regular
-user, you may only lose some information, but not the entire system.
-
-First, you have to enter your real name. This is not mandatory, of course
-as you can actually enter whatever you want. DrakX will then take the first
-word you have entered in the box and will bring it over to the \"User
-name\". This is the name this particular user will use to log onto the
-system. You can change it. You then have to enter a password here. A
-non-privileged (regular) user's password is not as crucial as \"root\"' one
-from a security point of view, but that is no reason to neglect it: after
-all, your files are at risk.
-
-If you click on \"Accept user\", you can then add as many as you want. Add
-a user for each one of your friends: your father or your sister, for
-example. When you finish adding all the users you want, select \"Done\".
-
-Clicking the \"Advanced\" button allows you to change the default \"shell\"
-for that user (bash by default)."),
-
-ask_mntpoint_s => 
-__("Listed above are the existing Linux partitions detected on your hard drive.
-You can keep the choices made by the wizard, they are good for most common
-installations. If you make any changes, you must at least define a root
-partition (\"/\"). Do not choose too small a partition or you will not be
-able to install enough software. If you want to store your data on a
-separate partition, you will also need to create a partition for \"/home\"
-(only possible if you have more than one Linux partition available).
-
-Each partition is listed as follows: \"Name\", \"Capacity\".
-
-\"Name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc."),
-
-chooseCd => 
-__("The Mandrake Linux installation is spread out over several CD-ROMs. DrakX
-knows if a selected package is located on another CD-ROM and will eject the
-current CD and ask you to insert a different one as required."),
-
-choosePackages => 
-__("It is now time to specify which programs you wish to install on your
-system. There are thousands of packages available for Mandrake Linux, and
-you are not supposed to know them all by heart.
-
-If you are performing a standard installation from a CD-ROM, you will first
-be asked to specify the CDs you currently have (in Expert mode only). Check
-the CD labels and highlight the boxes corresponding to the CDs you have
-available for installation. Click \"OK\" when you are ready to continue.
-
-Packages are sorted in groups corresponding to a particular use of your
-machine. The groups themselves are sorted into four sections:
-
- * \"Workstation\": if you plan to use your machine as a workstation, select
-one or more of the corresponding groups;
-
- * \"Development\": if your machine is to be used for programming, choose
-the desired group(s);
-
- * \"Server\": if your machine is intended to be a server, you will be able
-to select which of the most common services you wish to install on your
-machine;
-
- * \"Graphical Environment\": finally, this is where you will choose your
-preferred graphical environment. At least one must be selected if you want
-to have a graphical workstation!
-
-Moving the mouse cursor over a group name will display a short explanatory
-text about that group. If you deselect all groups when performing a regular
-installation (by opposition to an upgrade), a dialog will pop up proposing
-different options for a minimal installation:
-
- * \"With X\": install the fewer packages possible to have a working
-graphical desktop;
-
- * \"With basic documentation\": installs the base system plus basic
-utilities and their documentation. This installation is suitable for
-setting up a server;
-
- * \"Truly minimal install\": will install the strict minimum necessary to
-get a working Linux system, in command line only. This installation is
-about 65Mb large.
-
-You can check the \"Individual package selection\" box, which is useful if
-you are familiar with the packages being offered or if you want to have
-total control over what will be installed.
-
-If you started the installation in \"Upgrade\" mode, you can unselect all
-groups to avoid installing any new package. This is useful for repairing or
-updating an existing system."),
-
-choosePackagesTree => 
-__("Finally, depending on whether or not you selected individual packages, you
-will be presented a tree containing all packages classified by groups and
-subgroups. While browsing the tree, you can select entire groups,
-subgroups, or individual packages.
-
-Whenever you select a package on the tree, a description appears on the
-right. When your selection is finished, click the \"Install\" button which
-will then launch the installation process. Depending on the speed of your
-hardware and the number of packages that need to be installed, it may take
-a while to complete the process. An estimate of the time it will take to
-install everything is displayed on the screen, to help you gauge if there
-is sufficient time to enjoy a cup of coffee.
-
-!! If a server package has been selected, either intentionally or because
-it was part of a whole group, you will be asked to confirm that you really
-want those servers to be installed. Under Mandrake Linux, any installed
-servers are started by default at boot time. Even if they are safe and have
-no known issues at the time the distribution was shipped, it may happen
-that security holes are discovered after this version of Mandrake Linux was
-finalized. If you do not know what a particular service is supposed to do
-or why it is being installed, then click \"No\". Clicking \"Yes\" will
-install the listed services and they will be started automatically by
-default. !!
-
-The \"Automatic dependencies\" option simply disables the warning dialog
-which appears whenever the installer automatically selects a package. This
-occurs because it has determined that it needs to satisfy a dependency with
-another package in order to successfully complete the installation.
-
-The tiny floppy disk icon at the bottom of the list allows to load the
-package list chosen during a previous installation. Clicking on this icon
-will ask you to insert a floppy disk previously created at the end of
-another installation. See the second tip of last step on how to create such
-a floppy."),
-
-configureNetwork => 
-__("You are now proposed to set up your Internet/network connection. If you
-wish to connect your computer to the Internet or to a local network, click
-\"OK\". The autodetection of network devices and modem will be launched. If
-this detection fails, uncheck the \"Use auto detection\" box next time. You
-may also choose not to configure the network, or do it later; in that case,
-simply click the \"Cancel\" button.
-
-Available connections are: traditional modem, ISDN modem, ADSL connection,
-cable modem, and finally a simple LAN connection (Ethernet).
-
-Here, we will not detail each configuration. Simply make sure that you have
-all the parameters from your Internet Service Provider or system
-administrator.
-
-You can consult the ``User Guide'' chapter about Internet connections for
-details about the configuration, or simply wait until your system is
-installed and use the program described there to configure your connection.
-
-If you wish to configure the network later after installation, or if you
-are finished configuring your network connection, click \"Cancel\"."),
-
-configureServices => 
-__("You may now choose which services you wish to start at boot time.
-
-Here are presented all the services available with the current
-installation. Review them carefully and uncheck those which are not always
-needed at boot time.
-
-You can get a short explanatory text about a service by selecting a
-specific service. However, if you are not sure whether a service is useful
-or not, it is safer to leave the default behavior.
-
-!! At this stage, be very careful if you intend to use your machine as a
-server: you will probably not want to start any services which you do not
-need. Please remember that several services can be dangerous if they are
-enabled on a server. In general, select only the services you really need.
-!!"),
-
-configureTimezoneGMT => 
-__("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in
-local time according to the time zone you selected. It is however possible
-to deactivate this by deselecting \"Hardware clock set to GMT\" so that the
-hardware clock is the same as the system clock. This is useful when the
-machine is hosting another operating system like Windows.
-
-The \"Automatic time synchronization\" option will automatically regulate
-the clock by connecting to a remote time server on the Internet. In the
-list that is presented, choose a server located near you. Of course you
-must have a working Internet connection for this feature to work. It will
-actually install on your machine a time server which can be optionally used
-by other machines on your local network."),
-
-configureX => 
-__("X (for X Window System) is the heart of the GNU/Linux graphical interface
-on which all the graphical environments (KDE, GNOME, AfterStep,
-WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX
-will try to configure X automatically.
-
-It is extremely rare for it to fail, unless the hardware is very old (or
-very new). If it succeeds, it will start X automatically with the best
-resolution possible, depending on the size of the monitor. A window will
-then appear and ask you if you can see it.
-
-If you are doing an \"Expert\" installation, you will enter the X
-configuration wizard. See the corresponding section of the manual for more
-information about this wizard.
-
-If you can see the message during the test, and answer \"Yes\", then DrakX
-will proceed to the next step. If you cannot see the message, it simply
-means that the configuration was wrong and the test will automatically end
-after 10 seconds, restoring the screen."),
-
-configureXmain => 
-__("The first time you try the X configuration, you may not be very satisfied
-with its display (screen is too small, shifted left or right...). Hence,
-even if X starts up correctly, DrakX then asks you if the configuration
-suits you. It will also propose to change it by displaying a list of valid
-modes it could find, asking you to select one.
-
-As a last resort, if you still cannot get X to work, choose \"Change
-graphics card\", select \"Unlisted card\", and when prompted on which
-server, choose \"FBDev\". This is a failsafe option which works with any
-modern graphics card. Then choose \"Test again\" to be sure."),
-
-configureXxdm => 
-__("Finally, you will be asked whether you want to see the graphical interface
-at boot. Note this question will be asked even if you chose not to test the
-configuration. Obviously, you want to answer \"No\" if your machine is to
-act as a server, or if you were not successful in getting the display
-configured."),
-
-createBootdisk => 
-__("The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by
-booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<
-at the prompt. But in case your computer cannot boot from the CD-ROM, you
-should come back to this step for help in at least two situations:
-
- * when installing the bootloader, DrakX will rewrite the boot sector (MBR)
-of your main disk (unless you are using another boot manager), to allow you
-to start up with either Windows or GNU/Linux (assuming you have Windows in
-your system). If you need to reinstall Windows, the Microsoft install
-process will rewrite the boot sector, and then you will not be able to
-start GNU/Linux!
-
- * if a problem arises and you cannot start up GNU/Linux from the hard disk,
-this floppy disk will be the only means of starting up GNU/Linux. It
-contains a fair number of system tools for restoring a system, which has
-crashed due to a power failure, an unfortunate typing error, a typo in a
-password, or any other reason.
-
-When you click on this step, you will be asked to enter a disk inside the
-drive. The floppy disk you will insert must be empty or contain data which
-you do not need. You will not have to format it since DrakX will rewrite
-the whole disk."),
-
-doPartitionDisks => 
-__("At this point, you need to choose where you want to install the Mandrake
-Linux operating system on your hard drive. If your hard drive is empty or
-if an existing operating system is using all the available space, you will
-need to partition it. Basically, partitioning a hard drive consists of
-logically dividing it to create space to install your new Mandrake Linux
-system.
-
-Because the partitioning process' effects are usually irreversible,
-partitioning can be intimidating and stressful if you are an inexperienced
-user. Fortunately, there is a wizard which simplifies this process. Before
-beginning, please consult the manual and take your time.
-
-If you are running the installation in Expert mode, you will enter
-DiskDrake, the Mandrake Linux partitioning tool, which allows you to
-fine-tune your partitions. See the DiskDrake section in the ``User Guide''.
-From the installation interface, you can use the wizards as described here
-by clicking the dialog's \"Wizard\" button.
-
-If partitions have already been defined, either from a previous
-installation or from another partitioning tool, simply select those to
-install your Linux system.
-
-If partitions are not defined, you will need to create them using the
-wizard. Depending on your hard drive configuration, several options are
-available:
-
- * \"Use free space\": this option will simply lead to an automatic
-partitioning of your blank drive(s). You will not be prompted further;
-
- * \"Use existing partition\": the wizard has detected one or more existing
-Linux partitions on your hard drive. If you want to use them, choose this
-option;
-
- * \"Use the free space on the Windows; partition\": if MicrosoftWindows is
-installed on your hard drive and takes all the space available on it, you
-have to create free space for Linux data. To do so, you can delete your
-MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert
-mode'' solutions) or resize your MicrosoftWindows partition. Resizing can
-be performed without the loss of any data, provided you previously
-defragment the Windows partition. Backing up your data won't hurt either..
-This solution is recommended if you want to use both Mandrake Linux and
-MicrosoftWindows on the same computer.
-
-   Before choosing this option, please understand that after this procedure,
-the size of your MicrosoftWindows partition will be smaller than at the
-present time. You will have less free space under MicrosoftWindows to store
-your data or to install new software;
-
- * \"Erase entire disk\": if you want to delete all data and all partitions
-present on your hard drive and replace them with your new Mandrake Linux
-system, choose this option. Be careful with this solution because you will
-not be able to revert your choice after you confirm;
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Remove Windows\": this will simply erase everything on the drive and
-begin fresh, partitioning everything from scratch. All data on your disk
-will be lost;
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Expert mode\": choose this option if you want to manually partition
-your hard drive. Be careful it is a powerful but dangerous choice. You can
-very easily lose all your data. Hence, do not choose this unless you know
-what you are doing."),
-
-exitInstall => 
-__("There you are. Installation is now complete and your GNU/Linux system is
-ready to use. Just click \"OK\" to reboot the system. You can start
-GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as
-soon as the computer has booted up again.
-
-The \"Advanced\" button (in Expert mode only) shows two more buttons to:
-
- * \"generate auto-install floppy\": to create an installation floppy disk
-which will automatically perform a whole installation without the help of
-an operator, similar to the installation you just configured.
-
-   Note that two different options are available after clicking the button:
-
-    * \"Replay\". This is a partially automated installation as the
-partitioning step (and only this one) remains interactive;
-
-    * \"Automated\". Fully automated installation: the hard disk is completely
-rewritten, all data is lost.
-
-   This feature is very handy when installing a great number of similar
-machines. See the Auto install section on our web site;
-
- * \"Save packages selection\"(*): saves the package selection as done
-previously. Then, when doing another installation, insert the floppy inside
-the drive and run the installation going to the help screen by pressing on
-the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.
-
-(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
-\"mformat a:\")"),
-
-formatPartitions => 
-__("Any partitions that have been newly defined must be formatted for use
-(formatting means creating a filesystem).
-
-At this time, you may wish to reformat some already existing partitions to
-erase any data they contain. If you wish to do that, please select those
-partitions as well.
-
-Please note that it is not necessary to reformat all pre-existing
-partitions. You must reformat the partitions containing the operating
-system (such as \"/\", \"/usr\" or \"/var\") but you do not have to
-reformat partitions containing data that you wish to keep (typically
-\"/home\").
-
-Please be careful when selecting partitions. After formatting, all data on
-the selected partitions will be deleted and you will not be able to recover
-any of it.
-
-Click on \"OK\" when you are ready to format partitions.
-
-Click on \"Cancel\" if you want to choose another partition for your new
-Mandrake Linux operating system installation.
-
-Click on \"Advanced\" if you wish to select partitions that will be checked
-for bad blocks on the disk."),
-
-installPackages => 
-__("Your new Mandrake Linux operating system is currently being installed.
-Depending on the number of packages you will be installing and the speed of
-your computer, this operation could take from a few minutes to a
-significant amount of time.
-
-Please be patient."),
-
-installUpdates => 
-__("At the time you are installing Mandrake Linux, it is likely that some
-packages have been updated since the initial release. Some bugs may have
-been fixed, and security issues solved. To allow you to benefit from these
-updates, you are now proposed to download them from the Internet. Choose
-\"Yes\" if you have a working Internet connection, or \"No\" if you prefer
-to install updated packages later.
-
-Choosing \"Yes\" displays a list of places from which updates can be
-retrieved. Choose the one nearest you. Then a package-selection tree
-appears: review the selection, and press \"Install\" to retrieve and
-install the selected package(s), or \"Cancel\" to abort."),
-
-license => 
-__("Before continuing, you should read carefully the terms of the license. It
-covers the whole Mandrake Linux distribution, and if you do not agree with
-all the terms in it, click on the \"Refuse\" button which will immediately
-terminate the installation. To continue with the installation, click on the
-\"Accept\" button."),
-
-miscellaneous => 
-__("At this point, it is time to choose the security level desired for the
-machine. As a rule of thumb, the more exposed the machine is, and the more
-the data stored in it is crucial, the higher the security level should be.
-However, a higher security level is generally obtained at the expense of
-easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''
-to get more information about the meaning of these levels.
-
-If you do not know what to choose, keep the default option."),
-
-partition_with_diskdrake => 
-__("At this point, you need to choose which partition(s) will be used for the
-installation of your Mandrake Linux system. If partitions have already been
-defined, either from a previous installation of GNU/Linux or from another
-partitioning tool, you can use existing partitions. Otherwise, hard drive
-partitions must be defined.
-
-To create partitions, you must first select a hard drive. You can select
-the disk for partitioning by clicking on ``hda'' for the first IDE drive,
-``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
-
-To partition the selected hard drive, you can use these options:
-
- * \"Clear all\": this option deletes all partitions on the selected hard
-drive;
-
- * \"Auto allocate\": this option enables to automatically create \"Ext2\"
-and swap partitions in free space of your hard drive;
-
- * \"More\": gives access to additional features:
-
-    * \"Save partition table\": saves the partition table to a floppy. Useful
-for later partition-table recovery if necessary. It is strongly recommended
-to perform this step;
-
-    * \"Restore partition table\": allows to restore a previously saved
-partition table from floppy disk;
-
-    * \"Rescue partition table\": if your partition table is damaged, you can
-try to recover it using this option. Please be careful and remember that it
-can fail;
-
-    * \"Reload partition table\": discards all changes and loads your initial
-partition table;
-
-    * \"Removable media automounting\": unchecking this option will force users
-to manually mount and unmount removable medias such as floppies and
-CD-ROMs.
-
- * \"Wizard\": use this option if you wish to use a wizard to partition your
-hard drive. This is recommended if you do not have a good knowledge of
-partitioning;
-
- * \"Undo\": use this option to cancel your changes;
-
- * \"Toggle to normal/expert mode\": allows additional actions on partitions
-(type, options, format) and gives more information;
-
- * \"Done\": when you are finished partitioning your hard drive, this will
-save your changes back to disk.
-
-Note: you can reach any option using the keyboard. Navigate through the
-partitions using [Tab] and [Up/Down] arrows.
-
-When a partition is selected, you can use:
-
- * Ctrl-c to create a new partition (when an empty partition is selected);
-
- * Ctrl-d to delete a partition;
-
- * Ctrl-m to set the mount point.
-
-To get information about the different filesystem types available, please
-read the ext2fs chapter from the ``Reference Manual''.
-
-If you are installing on a PPC machine, you will want to create a small HFS
-``bootstrap'' partition of at least 1MB, which will be used by the yaboot
-bootloader. If you opt to make the partition a bit larger, say 50MB, you
-may find it a useful place to store a spare kernel and ramdisk images for
-emergency boot situations."),
-
-resizeFATChoose => 
-__("More than one Microsoft partition has been detected on your hard drive.
-Please choose the one you want to resize in order to install your new
-Mandrake Linux operating system.
-
-Each partition is listed as follows: \"Linux name\", \"Windows name\"
-\"Capacity\".
-
-\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc.
-
-\"Windows name\" is the letter of your hard drive under Windows (the first
-disk or partition is called \"C:\")."),
-
-resizeFATWait => 
-__("Please be patient. This operation can take several minutes."),
-
-selectInstallClass => 
-__("DrakX now needs to know if you want to perform a default (\"Recommended\")
-installation or if you want to have greater control (\"Expert\"). You can
-also choose to do a new install or an upgrade of an existing Mandrake Linux
-system:
-
- * \"Install\": completely wipes out the old system. In fact, depending on
-what currently holds your machine, you will be able to keep some old (Linux
-or other) partitions unchanged;
-
- * \"Upgrade\": this installation class allows to simply update the packages
-currently installed on your Mandrake Linux system. It keeps the current
-partitions of your hard drives as well as user configurations. All other
-configuration steps remain available with respect to plain installation;
-
- * \"Upgrade Packages Only\": this brand new class allows to upgrade an
-existing Mandrake Linux system while keeping all system configurations
-unchanged. Adding new packages to the current installation is also
-possible.
-
-Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"
-release.
-
-Depending on your knowledge of GNU/Linux, select one of the following
-choices:
-
- * Recommended: choose this if you have never installed a GNU/Linux
-operating system. The installation will be very easy and you will only be
-asked a few questions;
-
- * Expert: if you have a good knowledge of GNU/Linux, you can choose this
-installation class. The expert installation will allow you to perform a
-highly-customized installation. Answering some of the questions can be
-difficult if you do not have a good knowledge of GNU/Linux, so do not
-choose this unless you know what you are doing."),
-
-selectKeyboard => 
-__("Normally, DrakX selects the right keyboard for you (depending on the
-language you have chosen) and you won't even see this step. However, you
-might not have a keyboard that corresponds exactly to your language: for
-example, if you are an English speaking Swiss person, you may still want
-your keyboard to be a Swiss keyboard. Or if you speak English but are
-located in Quebec, you may find yourself in the same situation. In both
-cases, you will have to go back to this installation step and select an
-appropriate keyboard from the list.
-
-Click on the \"More\" button to be presented with the complete list of
-supported keyboards."),
-
-selectLanguage => 
-__("Please choose your preferred language for installation and system usage.
-
-Clicking on the \"Advanced\" button will allow you to select other
-languages to be installed on your workstation. Selecting other languages
-will install the language-specific files for system documentation and
-applications. For example, if you will host users from Spain on your
-machine, select English as the main language in the tree view and in the
-Advanced section click on the box corresponding to \"Spanish|Spain\".
-
-Note that multiple languages may be installed. Once you have selected any
-additional locales, click the \"OK\" button to continue."),
-
-selectMouse => 
-__("DrakX generally detects the number of buttons your mouse has. If not, it
-assumes you have a two-button mouse and will set it up for third-button
-emulation. DrakX will automatically know whether it is a PS/2, serial or
-USB mouse.
-
-If you wish to specify a different type of mouse select the appropriate
-type from the provided list.
-
-If you choose a mouse other than the default, a test screen will be
-displayed. Use the buttons and wheel to verify that the settings are
-correct. If the mouse is not working well, press the space bar or [Return]
-to \"Cancel\" and choose again."),
-
-selectSerialPort => 
-__("Please select the correct port. For example, the \"COM1\" port under
-Windows is named \"ttyS0\" under GNU/Linux."),
-
-setRootPassword => 
-__("This is the most crucial decision point for the security of your GNU/Linux
-system: you have to enter the \"root\" password. \"root\" is the system
-administrator and is the only one authorized to make updates, add users,
-change the overall system configuration, and so on. In short, \"root\" can
-do everything! That is why you must choose a password that is difficult to
-guess DrakX will tell you if it is too easy. As you can see, you can choose
-not to enter a password, but we strongly advise you against this if only
-for one reason: do not think that because you booted GNU/Linux that your
-other operating systems are safe from mistakes. Since \"root\" can overcome
-all limitations and unintentionally erase all data on partitions by
-carelessly accessing the partitions themselves, it is important for it to
-be difficult to become \"root\".
-
-The password should be a mixture of alphanumeric characters and at least 8
-characters long. Never write down the \"root\" password it makes it too
-easy to compromise a system.
-
-However, please do not make the password too long or complicated because
-you must be able to remember it without too much effort.
-
-The password will not be displayed on screen as you type it in. Hence, you
-will have to type the password twice to reduce the chance of a typing
-error. If you do happen to make the same typing error twice, this
-``incorrect'' password will have to be used the first time you connect.
-
-In Expert mode, you will be asked if you will be connecting to an
-authentication server, like NIS or LDAP.
-
-If your network uses the LDAP (or NIS) protocol for authentication, select
-\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your
-network administrator.
-
-If your computer is not connected to any administrated network, you will
-want to choose \"Local files\" for authentication."),
-
-setupBootloader => 
-__("LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally
-automated. In fact, DrakX analyzes the disk boot sector and acts
-accordingly, depending on what it finds here:
-
- * if a Windows boot sector is found, it will replace it with a grub/LILO
-boot sector. Hence, you will be able to load either GNU/Linux or another
-OS;
-
- * if a grub or LILO boot sector is found, it will replace it with a new
-one.
-
-If in doubt, DrakX will display a dialog with various options.
-
- * \"Bootloader to use\": you have three choices:
-
-    * \"GRUB\": if you prefer grub (text menu).
-
-    * \"LILO with graphical menu\": if you prefer LILO with its graphical
-interface.
-
-    * \"LILO with text menu\": if you prefer LILO with its text menu interface.
-
- * \"Boot device\": in most cases, you will not change the default
-(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the
-second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");
-
- * \"Delay before booting the default image\": when rebooting the computer,
-this is the delay granted to the user to choose in the bootloader menu,
-another boot entry than the default one.
-
-!! Beware that if you choose not to install a bootloader (by selecting
-\"Cancel\" here), you must ensure that you have a way to boot your Mandrake
-Linux system! Also, be sure you know what you do before changing any of the
-options. !!
-
-Clicking the \"Advanced\" button in this dialog will offer many advanced
-options, which are reserved to the expert user.
-
-After you have configured the general bootloader parameters, the list of
-boot options which will be available at boot time will be displayed.
-
-If there is another operating system installed on your machine, it will
-automatically be added to the boot menu. Here, you can choose to fine-tune
-the existing options. Select an entry and click \"Modify\" to modify or
-remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next
-installation step."),
-
-setupBootloaderAddEntry => 
-__("LILO (the LInux LOader) and grub are bootloaders: they are able to boot
-either GNU/Linux or any other operating system present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful to choose the correct parameters.
-
-You may also not want to give access to these other operating systems to
-anyone. In which case, you can delete the corresponding entries. But then,
-you will need a boot disk in order to boot those other operating systems!"),
-
-setupBootloaderBeginner => 
-__("You must indicate where you wish to place the information required to boot
-to GNU/Linux.
-
-Unless you know exactly what you are doing, choose \"First sector of drive
-(MBR)\"."),
-
-setupDefaultSpooler => 
-__("Here, we select a printing system for your computer. Other OSs may offer
-you one, but Mandrake Linux offers three.
-
- * \"pdq\" which means ``print, don't queue'', is the choice if you have a
-direct connection to your printer and you want to be able to panic out of
-printer jams, and you do not have networked printers. It will handle only
-very simple network cases and is somewhat slow for networks. Pick \"pdq\"
-if this is your maiden voyage to GNU/Linux. You can change your choices
-after installation by running PrinterDrake from the Mandrake Control Center
-and clicking the expert button.
-
- * \"CUPS\"``Common Unix Printing System'', is excellent at printing to your
-local printer and also halfway-around the planet. It is simple and can act
-as a server or a client for the ancient \"lpd\" printing system. Hence, it
-is compatible with the systems that went before. It can do many tricks, but
-the basic setup is almost as easy as \"pdq\". If you need this to emulate
-an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has
-graphical front-ends for printing or choosing printer options.
-
- * \"lprNG\"``line printer daemon New Generation''. This system can do
-approximately the same things the others can do, but it will print to
-printers mounted on a Novell Network, because it supports the IPX protocol,
-and it can print directly to shell commands. If you have need of Novell or
-printing to commands without using a separate pipe construct, use lprNG.
-Otherwise, CUPS is preferable as it is simpler and better at working over
-networks."),
-
-setupSCSI => 
-__("DrakX now detects any IDE device present in your computer. It will also
-scan for one or more PCI SCSI card(s) on your system. If a SCSI card is
-found, DrakX will automatically install the appropriate driver.
-
-Because hardware detection does not always detect a piece of hardware,
-DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"
-if you know that there is a SCSI card installed in your machine. You will
-be presented a list of SCSI cards to choose from. Click \"No\" if you have
-no SCSI hardware. If you are unsure, you can check the list of hardware
-detected in your machine by selecting \"See hardware info\" and clicking
-\"OK\". Examine the list of hardware and then click on the \"OK\" button to
-return to the SCSI interface question.
-
-If you have to manually specify your adapter, DrakX will ask if you want to
-specify options for it. You should allow DrakX to probe the hardware for
-the card-specific options which the hardware needs to initialize. This
-usually works well.
-
-If DrakX is not able to probe for the options which need to be passed, you
-will need to provide options to the driver manually. Please review the
-``User Guide'' (chapter 3, in the ``Collecting Information on Your
-Hardware'' section) for hints on retrieving the parameters required from
-hardware documentation, from the manufacturer's web site (if you have
-Internet access) or from MicrosoftWindows (if you used this hardware with
-Windows on your system)."),
-
-setupYabootAddEntry => 
-__("You can add additional entries for yaboot, either for other operating
-systems, alternate kernels, or for an emergency boot image.
-
-For other OSs, the entry consists only of a label and the \"root\"
-partition.
-
-For Linux, there are a few possible options:
-
- * Label: this is simply the name you will have to type at the yaboot prompt
-to select this boot option;
-
- * Image: this would be the name of the kernel to boot. Typically, vmlinux
-or a variation of vmlinux with an extension;
-
- * Root: the \"root\" device or ``/'' for your Linux installation;
-
- * Append: on Apple hardware, the kernel append option is used quite often
-to assist in initializing video hardware, or to enable keyboard mouse
-button emulation for the often lacking 2nd and 3rd mouse buttons on a stock
-Apple mouse. The following are some examples:
-
-         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
-
-         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
-
- * Initrd: this option can be used either to load initial modules, before
-the boot device is available, or to load a ramdisk image for an emergency
-boot situation;
-
- * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you
-need to allocate a large ramdisk, this option can be used;
-
- * Read-write: normally the \"root\" partition is initially brought up in
-read-only, to allow a file system check before the system becomes ``live''.
-Here, you can override this option;
-
- * NoVideo: should the Apple video hardware prove to be exceptionally
-problematic, you can select this option to boot in ``novideo'' mode, with
-native frame buffer support;
-
- * Default: selects this entry as being the default Linux selection,
-selectable by just pressing ENTER at the yaboot prompt. This entry will
-also be highlighted with a ``*'', if you press [Tab] to see the boot
-selections."),
-
-setupYabootGeneral => 
-__("Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot
-either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,
-these other operating systems are correctly detected and installed. If this
-is not the case, you can add an entry by hand in this screen. Be careful to
-choose the correct parameters.
-
-Yaboot's main options are:
-
- * Init Message: a simple text message displayed before the boot prompt;
-
- * Boot Device: indicates where you want to place the information required
-to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier
-to hold this information;
-
- * Open Firmware Delay: unlike LILO, there are two delays available with
-yaboot. The first delay is measured in seconds and at this point, you can
-choose between CD, OF boot, MacOS or Linux;
-
- * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
-After selecting Linux, you will have this delay in 0.1 second before your
-default kernel description is selected;
-
- * Enable CD Boot?: checking this option allows you to choose ``C'' for CD
-at the first boot prompt;
-
- * Enable OF Boot?: checking this option allows you to choose ``N'' for Open
-Firmware at the first boot prompt;
-
- * Default OS: you can select which OS will boot by default when the Open
-Firmware Delay expires."),
-
-summary => 
-__("Here are presented various parameters concerning your machine. Depending on
-your installed hardware, you may or not, see the following entries:
-
- * \"Mouse\": check the current mouse configuration and click on the button
-to change it if necessary;
-
- * \"Keyboard\": check the current keyboard map configuration and click on
-the button to change that if necessary;
-
- * \"Timezone\": DrakX, by default, guesses your time zone from the language
-you have chosen. But here again, as for the choice of a keyboard, you may
-not be in the country for which the chosen language should correspond.
-Hence, you may need to click on the \"Timezone\" button in order to
-configure the clock according to the time zone you are in;
-
- * \"Printer\": clicking on the \"No Printer\" button will open the printer
-configuration wizard;
-
- * \"Sound card\": if a sound card is detected on your system, it is
-displayed here. No modification possible at installation time;
-
- * \"TV card\": if a TV card is detected on your system, it is displayed
-here. No modification possible at installation time;
-
- * \"ISDN card\": if an ISDN card is detected on your system, it is
-displayed here. You can click on the button to change the parameters
-associated with it."),
-
-takeOverHdChoose => 
-__("Choose the hard drive you want to erase in order to install your new
-Mandrake Linux partition. Be careful, all data present on it will be lost
-and will not be recoverable!"),
-
-takeOverHdConfirm => 
-__("Click on \"OK\" if you want to delete all data and partitions present on
-this hard drive. Be careful, after clicking on \"OK\", you will not be able
-to recover any data and partitions present on this hard drive, including
-any Windows data.
-
-Click on \"Cancel\" to cancel this operation without losing any data and
-partitions present on this hard drive."),
-);
diff --git a/perl-install/http.pm b/perl-install/http.pm
deleted file mode 100644
index 8d1e8d5de..000000000
--- a/perl-install/http.pm
+++ /dev/null
@@ -1,42 +0,0 @@
-package http; # $Id$
-
-use IO::Socket;
-use network;
-
-
-my $sock;
-
-sub getFile {
-    local($^W) = 0;
-
-    my ($url) = @_;
-    $sock->close if $sock;
-    $url =~ m|/XXX$| and return; #- force closing connection.
-
-    my ($host, $port, $path) = $url =~ m,^http://([^/:]+)(?::(\d+))?(/\S*)?$,;
-    $host = network::resolv($host);
-
-    $sock = IO::Socket::INET->new(PeerAddr => $host,
-				  PeerPort => $port || 80,
-				  Proto    => 'tcp',
-				  Timeout  => 60) or die "can't connect $@";
-    $sock->autoflush;
-    print $sock join("\015\012" =>
-		     "GET $path HTTP/1.0",
-		     "Host: $host" . ($port && ":$port"),
-		     "User-Agent: DrakX/vivelinuxabaszindozs",
-		     "", "");
-
-    #- skip until empty line
-    my ($now, $last, $buf, $tmp) = 0;
-    my $read = sub { sysread($sock, $buf, 1) || die; $tmp .= $buf };
-    do {
-	$last = $now;
-	&$read; &$read if $buf =~ /\015/;
-	$now = $buf =~ /\012/;
-    } until ($now && $last);
-
-    $tmp =~ /^.*\b200\b/ ? $sock : undef;
-}
-
-1;
diff --git a/perl-install/install2 b/perl-install/install2
deleted file mode 100755
index b26684f9f..000000000
--- a/perl-install/install2
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/usr/bin/perl
-#- PERL_INSTALL_DEBUG is used to launch stage2 in debug mode
-
-#- Mandrake Graphic Install $Id$
-#- Copyright (C) 1999/2000 MandrakeSoft (pixel@mandrakesoft.com)
-#-
-#- This program is free software; you can redistribute it and/or modify
-#- it under the terms of the GNU General Public License as published by
-#- the Free Software Foundation; either version 2, or (at your option)
-#- any later version.
-#-
-#- This program is distributed in the hope that it will be useful,
-#- but WITHOUT ANY WARRANTY; without even the implied warranty of
-#- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#- GNU General Public License for more details.
-#-
-#- You should have received a copy of the GNU General Public License
-#- along with this program; if not, write to the Free Software
-#- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use diagnostics;
-use strict;
-
-BEGIN {
-    #- for testing purpose
-    (my $f = __FILE__) =~ s|install2$|list_modules.pm|;
-    -e $f or symlink '../kernel/list_modules.pm', $f;
-}
-
-use lib qw(/usr/bin/perl-install .);
-use install2;
-
-$::testing = $ENV{PERL_INSTALL_TEST};
-$::isStandalone = 0;
-
-install2::main(@ARGV);
-
-c::_exit(0);
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
deleted file mode 100644
index 0b5c58b92..000000000
--- a/perl-install/install2.pm
+++ /dev/null
@@ -1,642 +0,0 @@
-
-package install2; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($o $version);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use steps;
-use common;
-use install_any qw(:all);
-use install_steps;
-use lang;
-use keyboard;
-use mouse;
-use fsedit;
-use devices;
-use partition_table qw(:types);
-use modules;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use fs;
-#-$::corporate=1;
-
-
-#-#######################################################################################
-#-$O
-#-the big struct which contain, well everything (globals + the interactive methods ...)
-#-if you want to do a kickstart file, you just have to add all the required fields (see for example
-#-the variable $default)
-#-#######################################################################################
-$o = $::o = {
-#    bootloader => { linear => 0, lba32 => 1, message => 1, timeout => 5, restricted => 0 },
-    mkbootdisk => 0, #- no mkbootdisk if 0 or undef, find a floppy with 1, or fd1
-#-    packages   => [ qw() ],
-    partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0 }, #-, readonly => 0 },
-    authentication => { md5 => 1, shadow => 1 },
-    lang         => 'en_US',
-    isUpgrade    => 0,
-    toRemove     => [],
-    toSave       => [],
-#-    simple_themes => 1,
-
-    timezone => {
-#-                   timezone => "Europe/Paris",
-#-                   UTC      => 1,
-                },
-#-    superuser => { password => 'a', shell => '/bin/bash', realname => 'God' },
-#-    user => { name => 'foo', password => 'bar', home => '/home/foo', shell => '/bin/bash', realname => 'really, it is foo' },
-
-#-    keyboard => 'de',
-#-    display => "192.168.1.19:1",
-    steps        => \%steps::installSteps,
-    orderedSteps => \@steps::orderedInstallSteps,
-
-#- for the list of fields available for user and superuser, see @etc_pass_fields in install_steps.pm
-#-    intf => { eth0 => { DEVICE => "eth0", IPADDR => '1.2.3.4', NETMASK => '255.255.255.128' } },
-
-#-step : the current one
-#-prefix
-#-mouse
-#-keyboard
-#-netc
-#-methods
-#-packages compss
-#-printer haveone entry(cf printer.pm)
-
-};
-
-
-sub installStepsCall {
-    my ($o, $auto, $fun, @args) = @_;
-    $fun = "install_steps::$fun" if $auto;
-    $o->$fun(@args);
-}
-
-#-######################################################################################
-#- Steps Functions
-#- each step function are called with two arguments : clicked(because if you are a
-#- beginner you can force the the step) and the entered number
-#-######################################################################################
-
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectLanguage', $ent_number == 1);
-
-    $o->acceptLicence;
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    require pkgs;
-    my ($first_time) = $ent_number == 1;
-
-    add2hash($o->{mouse} ||= {}, mouse::read($o->{prefix})) if $o->{isUpgrade} && $first_time;
-
-    installStepsCall($o, $auto, 'selectMouse', !$first_time || $clicked);
-
-    addToBeDone { mouse::write($o->{prefix}, $o->{mouse}) } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    if (!$::live && !$::g_auto_install && !$o->{blank} && !$::testing) {
-	-s modules::cz_file() or die _("Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)", modules::cz_file());
-    }
-
-    installStepsCall($o, $auto, 'setupSCSI', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($clicked, $first_time, $auto) = ($_[0], $_[1] == 1, $_[2]);
-
-    if ($o->{isUpgrade} && $first_time && $o->{keyboard_unsafe}) {
-	my $keyboard = keyboard::read($o->{prefix});
-	$keyboard and $o->{keyboard} = $keyboard;
-    }
-    installStepsCall($o, $auto, 'selectKeyboard', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectInstallClass', $clicked);
-
-    if ($o->{steps}{choosePackages}{entered} >= 1 && !$o->{steps}{installPackages}{done}) {
-	installStepsCall($o, $auto, 'setPackages');
-	installStepsCall($o, $auto, 'selectPackagesToUpgrade') if $o->{isUpgrade};
-    }
-    if ($o->{isUpgrade}) {
-	@{$o->{orderedSteps}} = map { /setupSCSI/ ? ($_, "doPartitionDisks") : $_ }
-	                        grep { !/doPartitionDisks/ } @{$o->{orderedSteps}};
-	$o->{keepConfiguration} and @{$o->{orderedSteps}} = grep { !/selectMouse|selectKeyboard|miscellaneous|setRootPassword|addUser|configureNetwork|installUpdates|summary|configureServices|configureX/ } @{$o->{orderedSteps}};
-	my $s; foreach (@{$o->{orderedSteps}}) {
-	    $s->{next} = $_ if $s;
-	    $s = $o->{steps}{$_};
-	}
-    }
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($clicked, $ent_number, $auto) = @_;
-    $o->{steps}{formatPartitions}{done} = 0;
-    installStepsCall($o, $auto, 'doPartitionDisksBefore');
-    installStepsCall($o, $auto, 'doPartitionDisks');
-    installStepsCall($o, $auto, 'doPartitionDisksAfter');
-}
-
-sub formatPartitions {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    $o->{steps}{choosePackages}{done} = 0;
-    installStepsCall($o, $auto, 'choosePartitionsToFormat', $o->{fstab}) if !$o->{isUpgrade};
-    my $want_root_formated = fsedit::get_root($o->{fstab})->{toFormat};
-    if ($want_root_formated) {
-	foreach ('/usr') {
-	    my $part = fsedit::mntpoint2part($_, $o->{fstab}) or next;
-	    $part->{toFormat} or die _("You must also format %s", $_);
-	}
-    }
-    installStepsCall($o, $auto, 'formatMountPartitions', $o->{fstab}) if !$::testing;
-
-    if ($want_root_formated) {
-	#- we formatted /, ensure /var/lib/rpm is cleaned otherwise bad things can happen
-	#- (especially when /var is *not* formatted)
-	eval { rm_rf("$o->{prefix}/var/lib/rpm") };
-    }
-
-    mkdir "$o->{prefix}/$_", 0755 foreach 
-      qw(dev etc etc/profile.d etc/rpm etc/sysconfig etc/sysconfig/console 
-	etc/sysconfig/network-scripts etc/sysconfig/console/consolefonts 
-	etc/sysconfig/console/consoletrans
-	home mnt tmp var var/tmp var/lib var/lib/rpm var/lib/urpmi);
-    mkdir "$o->{prefix}/$_", 0700 foreach qw(root root/tmp root/drakx);
-
-    common::screenshot_dir__and_move();
-
-    any::rotate_logs($o->{prefix});
-
-    require raid;
-    raid::prepare_prefixed($o->{all_hds}{raids}, $o->{prefix});
-}
-
-#------------------------------------------------------------------------------
-sub choosePackages {
-    my ($clicked, $ent_number, $auto) = @_;
-    require pkgs;
-
-    #- always setPackages as it may have to copy hdlist files and depslist file.
-    installStepsCall($o, $auto, 'setPackages');
-    installStepsCall($o, $auto, 'selectPackagesToUpgrade') if $o->{isUpgrade} && $ent_number == 1;
-
-    installStepsCall($o, $auto, 'choosePackages', $o->{packages}, $o->{compssUsers}, $ent_number == 1);
-    log::l("compssUsersChoice's: ", join(" ", grep { $o->{compssUsersChoice}{$_} } keys %{$o->{compssUsersChoice}}));
-
-    #- check pre-condition where base backage has to be selected.
-    pkgs::packageFlagSelected(pkgs::packageByName($o->{packages}, 'basesystem')) or die "basesystem package not selected";
-
-    #- check if there are package that need installation.
-    $o->{steps}{installPackages}{done} = 0 if $o->{steps}{installPackages}{done} && pkgs::packagesToInstall($o->{packages}) > 0;
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'readBootloaderConfigBeforeInstall') if $ent_number == 1;
-
-    installStepsCall($o, $auto, 'beforeInstallPackages');
-    installStepsCall($o, $auto, 'installPackages');
-    installStepsCall($o, $auto, 'afterInstallPackages');
-}
-#------------------------------------------------------------------------------
-sub miscellaneous {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'miscellaneousBefore', $clicked);
-    installStepsCall($o, $auto, 'miscellaneous', $clicked);
-    installStepsCall($o, $auto, 'miscellaneousAfter', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub summary {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'summary', $ent_number == 1);
-}
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($clicked, $ent_number, $auto) = @_;
-    #- get current configuration of network device.
-    require network;
-    eval { network::read_all_conf($o->{prefix}, $o->{netc} ||= {}, $o->{intf} ||= {}) };
-    installStepsCall($o, $auto, 'configureNetwork', $ent_number == 1, $clicked);
-}
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'installCrypto');
-}
-#------------------------------------------------------------------------------
-sub installUpdates {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'installUpdates');
-}
-#------------------------------------------------------------------------------
-sub configureServices {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'configureServices', $clicked);
-}
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $o->{isUpgrade};
-
-    installStepsCall($o, $auto, 'setRootPassword', $clicked);
-    addToBeDone { install_any::setAuthentication($o) } 'installPackages';
-}
-#------------------------------------------------------------------------------
-sub addUser {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $o->{isUpgrade} && !$clicked;
-
-    installStepsCall($o, $auto, 'addUser', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
-    my ($clicked, $ent_number, $auto) = @_;
-    modules::write_conf($o->{prefix});
-    installStepsCall($o, $auto, 'createBootdisk', $ent_number == 1, $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
-    my ($clicked, $ent_number, $auto) = @_;
-    return if $::g_auto_install;
-
-    modules::write_conf($o->{prefix});
-
-    installStepsCall($o, $auto, 'setupBootloaderBefore') if $ent_number == 1;
-    installStepsCall($o, $auto, 'setupBootloader', $ent_number-1 + $clicked*2); #- gore :-(
-
-    local $ENV{DRAKX_PASSWORD} = $o->{bootloader}{password};
-    local $ENV{DURING_INSTALL} = 1;
-    run_program::rooted($o->{prefix}, "/usr/sbin/msec", "-o", "run_commands=0", "-o", "log=stderr", $o->{security});
-    any::config_libsafe($o->{prefix}, $o->{libsafe});
-}
-#------------------------------------------------------------------------------
-sub configureX {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    #- done here and also at the end of install2.pm, just in case...
-    install_any::write_fstab($o);
-    modules::write_conf($o->{prefix});
-
-    require pkgs;
-    installStepsCall($o, $auto, 'configureX', $clicked) if pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'XFree86')) && !$o->{X}{disabled} || $clicked || $::testing;
-}
-#------------------------------------------------------------------------------
-sub exitInstall {
-    my ($clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'exitInstall', getNextStep() eq 'exitInstall');
-}
-
-
-sub start_i810fb {
-
-    my ($vga) = cat_('/proc/cmdline') =~ /vga=(\S+)/;
-    return if !$vga || listlength(cat_('/proc/fb'));
-
-    my %vga_to_xres = (0x311 => '640', 0x314 => '800', 0x317 => '1024');
-    my $xres = $vga_to_xres{$vga} || '800';
-
-    log::l("trying to load i810fb module with xres <$xres> (vga was <$vga>)");
-    eval {
-	any::ddcxinfos(); # keep the result otherwise ddcxinfos doesn't return good results afterwards
-	modules::load([ 'i810fb',
-			"xres=$xres", 'hsync1=32', 'hsync2=48', 'vsync1=50', 'vsync2=70',  #- this sucking i810fb does not accept floating point numbers in hsync!
-			 'vram=2', 'bpp=16', 'accel=1', 'mtrr=1', 'hwcur=1', 'xcon=4' ]);
-    };
-}
-
-
-#-######################################################################################
-#- MAIN
-#-######################################################################################
-sub main {
-    $SIG{__DIE__} = sub { chomp(my $err = $_[0]); log::l("warning: $err") };
-    $SIG{SEGV} = sub { 
-	my $msg = "segmentation fault: seems like memory is missing as the install crashes"; print "$msg\n"; log::l($msg);
-	$o->ask_warn('', $msg);
-	setVirtual(1);
-	require install_steps_auto_install;
-	install_steps_auto_install_non_interactive::errorInStep ();
-    };
-    $ENV{PERL_BADLANG} = 1;
-    umask 022;
-
-    $::isInstall = 1;
-    $::expert = $::g_auto_install = 0;
-
-#-    c::unlimit_core() unless $::testing;
-
-    my ($cfg, $patch, @auto);
-    my %cmdline; map { 
-	my ($n, $v) = split '=';
-	$cmdline{$n} = $v || 1;
-    } split ' ', cat_("/proc/cmdline");
-
-    my $opt; foreach (@_) {
-	if (/^--?(.*)/) {
-	    $cmdline{$opt} = 1 if $opt;
-	    $opt = $1;
-	} else {
-	    $cmdline{$opt} = $_ if $opt;
-	    $opt = '';
-	}
-    } $cmdline{$opt} = 1 if $opt;
-    
-    map_each {
-	my ($n, $v) = @_;
-	my $f = ${{
-	    oem       => sub { $::oem = $v },
-	    lang      => sub { $o->{lang} = $v },
-	    flang     => sub { $o->{lang} = $v ; push @auto, 'selectLanguage' },
-	    method    => sub { $o->{method} = $v },
-	    pcmcia    => sub { $o->{pcmcia} = $v },
-	    vga16     => sub { $o->{vga16} = $v },
-	    vga       => sub { $o->{vga} = $v },
-	    step      => sub { $o->{steps}{first} = $v },
-	    expert    => sub { $::expert = $v },
-	    fbeginner => sub { $::expert = 0; push @auto, 'selectInstallClass' },
-	    fexpert   => sub { $::expert = 1; push @auto, 'selectInstallClass' },
-	    desktop   => sub { $o->{meta_class} = 'desktop' },
-	    firewall  => sub { $o->{meta_class} = 'firewall'; push @auto, 'selectInstallClass'},
-	    lnx4win   => sub { $o->{lnx4win} = 1 },
-	    readonly  => sub { $o->{partitioning}{readonly} = $v ne "0" },
-	    display   => sub { $o->{display} = $v },
-	    askdisplay => sub { print "Please enter the X11 display to perform the install on ? "; $o->{display} = chomp_(scalar(<STDIN>)) },
-	    security  => sub { $o->{security} = $v },
-	    live      => sub { $::live = 1 },
-	    noauto    => sub { $::noauto = 1 },
-	    test      => sub { $::testing = 1 },
-	    patch     => sub { $patch = 1 },
-	    defcfg    => sub { $cfg = $v },
-	    newt      => sub { $o->{interactive} = "newt" },
-	    text      => sub { $o->{interactive} = "newt" },
-	    stdio     => sub { $o->{interactive} = "stdio"},
-	    corporate => sub { $::corporate = 1 },
-	    kickstart => sub { $::auto_install = $v },
-	    auto_install => sub { $::auto_install = $v },
-	    simple_themes => sub { $o->{simple_themes} = 1 },
-	    useless_thing_accepted => sub { $o->{useless_thing_accepted} = 1 },
-	    alawindows => sub { $o->{security} = 0; $o->{partitioning}{clearall} = 1; $o->{bootloader}{crushMbr} = 1 },
-	    fdisk => sub { $o->{partitioning}{fdisk} = 1 },
-	    g_auto_install => sub { $::testing = $::g_auto_install = 1; $o->{partitioning}{auto_allocate} = 1 },
-	    nomouseprobe => sub { $o->{nomouseprobe} = $v },
-	    blank         => sub { $o->{blank} = 1},
-	    updatemodules => sub { $o->{updatemodules} = 1},
-	}}{lc $n}; &$f if $f;
-    } %cmdline;
-
-    if ($::testing) {
-	$ENV{SHARE_PATH} ||= "/export/Mandrake/mdkinst/usr/share";
-	$ENV{SHARE_PATH} = "/usr/share" if !-e $ENV{SHARE_PATH};
-    } else {
-	$ENV{SHARE_PATH} ||= "/usr/share";
-    }
-
-    undef $::auto_install if $cfg;
-    if ($::g_auto_install) {
-	(my $root = `/bin/pwd`) =~ s|(/[^/]*){5}$||;
-	symlinkf $root, "/tmp/image" or die "unable to create link /tmp/image";
-	$o->{method} ||= "cdrom";
-	$o->{mkbootdisk} = 0;
-    }
-    unless ($::testing || $::live) {
-	symlink "rhimage", "/tmp/image"; #- for compatibility with old stage1
-	unlink $_ foreach "/modules/modules.mar", "/sbin/stage1";
-    }
-
-    print STDERR "in second stage install\n";
-    log::openLog(($::testing || $o->{localInstall}) && 'debug.log');
-    log::l("second stage install running (", any::drakx_version(), ")");
-
-    $o->{prefix} = $::testing ? "/tmp/test-perl-install" : $::live ? "" : "/mnt";
-    $o->{root}   = $::testing ? "/tmp/root-perl-install" : "/";
-    $o->{isUpgrade} = 1 if $::live;
-    mkdir $o->{prefix}, 0755;
-    mkdir $o->{root}, 0755;
-    devices::make("/dev/zero"); #- needed by ddcxinfos
-
-    #-  make sure we don't pick up any gunk from the outside world
-    my $remote_path = "$o->{prefix}/sbin:$o->{prefix}/bin:$o->{prefix}/usr/sbin:$o->{prefix}/usr/bin:$o->{prefix}/usr/X11R6/bin";
-    $ENV{PATH} = "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin:$remote_path" unless $::g_auto_install;
-
-    eval { spawnShell() };
-
-    $o->{prefix} = $::testing ? "/tmp/test-perl-install" : $::live ? "" : "/mnt";
-    mkdir $o->{prefix}, 0755;
-
-    modules::load_dependencies(($::testing ? ".." : "") . "/modules/modules.dep");
-    modules::read_stage1_conf($_) foreach "/tmp/conf.modules", "/etc/modules.conf";
-    modules::read_already_loaded();
-
-    #- done before auto_install is called to allow the -IP feature on auto_install file name
-    if (-e '/tmp/network') {
-	require network;
-	#- get stage1 network configuration if any.
-	log::l('found /tmp/network');
-	$o->{netc} ||= {};
-	add2hash($o->{netc}, network::read_conf('/tmp/network'));
-	if (my ($file) = glob_('/tmp/ifcfg-*')) {
-	    log::l("found network config file $file");
-	    my $l = network::read_interface_conf($file);
-	    $o->{intf} ||= { $l->{DEVICE} => $l };
-	}
-	if (-e '/etc/resolv.conf') {
-	    my $file ='/etc/resolv.conf';
-	    log::l("found network config file $file");
-	    add2hash($o->{netc}, network::read_resolv_conf($file));
-	}
-    }
-
-    #- done after module dependencies are loaded for "vfat depends on fat"
-    if ($::auto_install) {
-	if ($::auto_install =~ /-IP(\.pl)?$/) {
-	    my $ip = join('', map { sprintf "%02X", $_ } split '\.', $o->{intf}{IPADDR});
-	    $::auto_install =~ s/-IP(\.pl)?$/-$ip$1/;
-	}
-	require install_steps_auto_install;
-	eval { $o = $::o = install_any::loadO($o, $::auto_install) };
-	if ($@) {
-	    if ($o->{useless_thing_accepted}) { #- Pixel's hack to be able to fail through
-		log::l("error using auto_install, continuing");
-		undef $::auto_install;
-	    } else {
-		print "Error using auto_install\n$@\n";
-		install_steps_auto_install_non_interactive::errorInStep ();
-	    }
-	} else {
-	    log::l("auto install config file loaded successfully");
-	}
-    }
-    $o->{interactive} ||= 'gtk' if !$::auto_install;
- 
-    if ($o->{interactive} eq "gtk" && availableMemory < 22 * 1024) {
- 	log::l("switching to newt install cuz not enough memory");
- 	$o->{interactive} = "newt";
-    }
-    require"install_steps_$o->{interactive}.pm" if $o->{interactive}; #- no space to skip perl2fcalls
-
-    #- needed before accessing floppy (in case of usb floppy)
-    $::noauto or modules::load_category('bus/usb'); 
-
-    #- patch should be read after defcfg in order to take precedance.
-    eval { $o = $::o = install_any::loadO($o, $cfg) } if $cfg;
-    eval { $o = $::o = install_any::loadO($o, "patch") } if $patch;
-
-    eval { modules::load("af_packet") };
-
-    map_index {
-	modules::add_alias("sound-slot-$::i", $_->{driver});
-    } modules::probe_category('multimedia/sound');
-
-    #- needed very early for install_steps_gtk
-    eval { ($o->{mouse}, @{$o->{wacom} = []}) = mouse::detect() } unless $o->{nomouseprobe} || $o->{mouse};
-
-    $o->{lang} = lang::set($o->{lang}) if $o->{lang} ne 'en_US'; #- mainly for defcfg
-
-    start_i810fb();
-
-    $o->{allowFB} = listlength(cat_("/proc/fb"));
-
-    my $VERSION = cat__(install_any::getFile("VERSION")) or do { print "VERSION file missing\n"; sleep 5 };
-    $o->{lnx4win} = 1 if $VERSION =~ /lnx4win/i;
-    $o->{meta_class} = 'desktop' if $VERSION =~ /desktop/i;
-    $o->{meta_class} = 'firewall' if $VERSION =~ /firewall/i;
-    $o->{meta_class} = 'server' if $VERSION =~ /server/i;
-    if ($::oem) {
-	$o->{partitioning}{use_existing_root} = 1;
-	$o->{compssListLevel} = 4;
-	push @auto, 'selectInstallClass', 'doPartitionDisks', 'choosePackages', 'configureTimezone', 'exitInstall';
-    }
-
-    foreach (@auto) {
-	my $s = $o->{steps}{/::(.*)/ ? $1 : $_} or next;
-	$s->{auto} = $s->{hidden} = 1;
-    }
-
-    my $o_;
-    while (1) {
-    	$o_ = $::auto_install ?
-    	  install_steps_auto_install->new($o) :
-    	    $o->{interactive} eq "stdio" ?
-    	  install_steps_stdio->new($o) :
-    	    $o->{interactive} eq "newt" ?
-    	  install_steps_newt->new($o) :
-    	    $o->{interactive} eq "gtk" ?
-    	  install_steps_gtk->new($o) :
-    	    die "unknown install type";
-	$o_ and last;
-
-	$o->{interactive} = "newt";
-	require install_steps_newt;
-    }
-    $::o = $o = $o_;
-
-    install_any::remove_unused() if common::usingRamdisk();
-
-    #-the main cycle
-    my $clicked = 0;
-    MAIN: for ($o->{step} = $o->{steps}{first};; $o->{step} = getNextStep()) {
-	$o->{steps}{$o->{step}}{entered}++;
-	$o->enteringStep($o->{step});
-	if ($o->{steps}{$o->{step}}{icon}) { $o->{icon} = $o->{steps}{$o->{step}}{icon} } else { undef $o->{icon} }
-	eval {
-	    &{$install2::{$o->{step}}}($clicked || $o->{steps}{$o->{step}}{noauto},
-				       $o->{steps}{$o->{step}}{entered},
-				       $clicked ? 0 : $o->{steps}{$o->{step}}{auto});
-	};
-	my $err = $@;
-	$o->kill_action;
-	$clicked = 0;
-	if ($err) {
-	    local $_ = $err;
-	    $o->kill_action;
-	    if (/^setstep (.*)/) {
-		$o->{step} = $1;
-		$o->{steps}{$1}{done} = 0;
-		$clicked = 1;
-		redo MAIN;
-	    }
-	    /^theme_changed$/ and redo MAIN;
-	    unless (/^already displayed/) {
-		eval { $o->errorInStep($_) };
-		$o->{steps}{$o->{step}}{auto} = 0;
-		$err = $@;
-		$err and next;
-	    }
-	    $o->{step} = $o->{steps}{$o->{step}}{onError};
-	    next MAIN unless $o->{steps}{$o->{step}}{reachable}; #- sanity check: avoid a step not reachable on error.
-	    redo MAIN;
-	}
-	$o->{steps}{$o->{step}}{done} = 1;
-	$o->leavingStep($o->{step});
-
-	last if $o->{step} eq 'exitInstall';
-    }
-    install_any::clean_postinstall_rpms();
-    install_any::log_sizes($o);
-    install_any::remove_advertising($o);
-    install_any::write_fstab($o);
-    modules::write_conf($o->{prefix});
-
-    #- mainly for auto_install's
-    #- do not use run_program::xxx because it doesn't leave stdin/stdout unchanged
-    system("bash", "-c", $o->{postInstallNonRooted}) if $o->{postInstallNonRooted};
-    system("chroot", $o->{prefix}, "bash", "-c", $o->{postInstall}) if $o->{postInstall};
-
-    install_any::ejectCdrom();
-
-    #- to ensure linuxconf doesn't cry against those files being in the future
-    foreach ('/etc/modules.conf', '/etc/crontab', '/etc/sysconfig/mouse', '/etc/sysconfig/network', '/etc/X11/fs/config') {
-	my $now = time - 24 * 60 * 60;
-	utime $now, $now, "$o->{prefix}/$_";
-    }
-    $::live or install_any::killCardServices();
-
-    #- make sure failed upgrade will not hurt too much.
-    install_steps::cleanIfFailedUpgrade($o);
-
-    -e "$o->{prefix}/usr/sbin/urpmi.update" or eval { rm_rf("$o->{prefix}/var/lib/urpmi") };
-
-    #- copy latest log files
-    eval { cp_af("/tmp/$_", "$o->{prefix}/root/drakx") foreach qw(ddebug.log stage1.log) };
-
-    #- ala pixel? :-) [fpons]
-    common::sync(); common::sync();
-
-    log::l("installation complete, leaving");
-    log::l("files still open by install2: ", readlink($_)) foreach glob_("/proc/self/fd/*");
-    print "\n" x 80;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
deleted file mode 100644
index 78283cf96..000000000
--- a/perl-install/install_any.pm
+++ /dev/null
@@ -1,1149 +0,0 @@
-package install_any; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $boot_medium @advertising_images);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    all => [ qw(getNextStep spawnShell addToBeDone) ],
-);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use run_program;
-use partition_table qw(:types);
-use partition_table_raw;
-use devices;
-use fsedit;
-use modules;
-use detect_devices;
-use lang;
-use any;
-use log;
-use fs;
-
-#- boot medium (the first medium to take into account).
-$boot_medium = 1;
-
-#-######################################################################################
-#- Media change variables&functions
-#-######################################################################################
-my $postinstall_rpms = '';
-my $current_medium = $boot_medium;
-my $asked_medium = $boot_medium;
-my $cdrom = undef;
-sub useMedium($) {
-    #- before ejecting the first CD, there are some files to copy!
-    #- does nothing if the function has already been called.
-    $_[0] > 1 and $::o->{method} eq 'cdrom' and setup_postinstall_rpms($::o->{prefix}, $::o->{packages});
-
-    $asked_medium eq $_[0] or log::l("selecting new medium '$_[0]'");
-    $asked_medium = $_[0];
-}
-sub changeMedium($$) {
-    my ($method, $medium) = @_;
-    log::l("change to medium $medium for method $method (refused by default)");
-    0;
-}
-sub relGetFile($) {
-    local $_ = $_[0];
-    m|\.rpm$| ? "$::o->{packages}{mediums}{$asked_medium}{rpmsdir}/$_" : $_;
-}
-sub askChangeMedium($$) {
-    my ($method, $medium) = @_;
-    my $allow;
-    do {
-	eval { $allow = changeMedium($method, $medium) };
-    } while ($@); #- really it is not allowed to die in changeMedium!!! or install will cores with rpmlib!!!
-    log::l($allow ? "accepting medium $medium" : "refusing medium $medium");
-    $allow;
-}
-sub errorOpeningFile($) {
-    my ($file) = @_;
-    $file eq 'XXX' and return; #- special case to force closing file after rpmlib transaction.
-    $current_medium eq $asked_medium and log::l("errorOpeningFile $file"), return; #- nothing to do in such case.
-    $::o->{packages}{mediums}{$asked_medium}{selected} or return; #- not selected means no need for worying about.
-
-    my $max = 32; #- always refuse after $max tries.
-    if ($::o->{method} eq "cdrom") {
-	cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
-	return unless $cdrom;
-	ejectCdrom($cdrom);
-	while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
-	    $current_medium = $asked_medium;
-	    eval { fs::mount($cdrom, "/tmp/image", "iso9660", 'readonly') };
-	    my $getFile = getFile($file); 
-	    $getFile && @advertising_images and copy_advertising($::o);
-	    $getFile and return $getFile;
-	    $current_medium = 'unknown'; #- don't know what CD is inserted now.
-	    ejectCdrom($cdrom);
-	    --$max;
-	}
-    } else {
-	while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
-	    $current_medium = $asked_medium;
-	    my $getFile = getFile($file); $getFile and return $getFile;
-	    $current_medium = 'unknown'; #- don't know what CD image has been copied.
-	    --$max;
-	}
-    }
-
-    #- keep in mind the asked medium has been refused on this way.
-    #- this means it is no more selected.
-    $::o->{packages}{mediums}{$asked_medium}{selected} = undef;
-
-    #- on cancel, we can expect the current medium to be undefined too,
-    #- this enable remounting if selecting a package back.
-    $current_medium = 'unknown';
-
-    return;
-}
-sub getFile {
-    my ($f, $method) = @_;
-    log::l("getFile $f:$method");
-    my $rel = relGetFile($f);
-    do {
-	if ($f =~ m|^http://|) {
-	    require http;
-	    http::getFile($f);
-	} elsif ($method =~ /crypto|update/i) {
-	    require crypto;
-	    crypto::getFile($f);
-	} elsif ($::o->{method} eq "ftp") {
-	    require ftp;
-	    ftp::getFile($rel);
-	} elsif ($::o->{method} eq "http") {
-	    require http;
-	    http::getFile("$ENV{URLPREFIX}/$rel");
-	} else {
-	    #- try to open the file, but examine if it is present in the repository, this allow
-	    #- handling changing a media when some of the file on the first CD has been copied
-	    #- to other to avoid media change...
-	    my $f2 = "$postinstall_rpms/$f";
-	    $f2 = "/tmp/image/$rel" unless $postinstall_rpms && -e $f2;
-	    open GETFILE, $f2 and *GETFILE;
-	}
-    } || errorOpeningFile($f);
-}
-sub getAndSaveFile {
-    my ($file, $local) = @_ == 1 ? ("Mandrake/mdkinst$_[0]", $_[0]) : @_;
-    local *F; open F, ">$local" or return;
-    local $/ = \ (16 * 1024);
-    my $f = ref($file) ? $file : getFile($file) or return;
-    local $_;
-    while (<$f>) { syswrite F, $_ }
-    1;
-}
-
-
-#-######################################################################################
-#- Post installation RPMS from cdrom only, functions
-#-######################################################################################
-sub setup_postinstall_rpms($$) {
-    my ($prefix, $packages) = @_;
-
-    $postinstall_rpms and return;
-    $postinstall_rpms = "$prefix/usr/postinstall-rpm";
-
-    require pkgs;
-
-    log::l("postinstall rpms directory set to $postinstall_rpms");
-    clean_postinstall_rpms(); #- make sure in case of previous upgrade problem.
-    mkdir_p($postinstall_rpms);
-
-    my %toCopy;
-    #- compute closure of package that may be copied, use INSTALL category
-    #- in rpmsrate.
-    foreach (@{$packages->{needToCopy} || []}) {
-	my $p = pkgs::packageByName($packages, $_);
-	pkgs::selectPackage($packages, $p, 0, \%toCopy);
-    }
-
-    my @toCopy = grep { $_ && pkgs::packageFlagSelected($_) == 0 } map { pkgs::packageByName($packages, $_) } keys %toCopy;
-
-    #- extract headers of package, this is necessary for getting
-    #- the complete filename of each package.
-    #- copy the package files in the postinstall RPMS directory.
-    #- last arg is default medium '' known as the CD#1.
-    #- cp_af doesn't handle correctly a missing file.
-    eval { cp_af((grep { -r $_ } map { "/tmp/image/" . relGetFile(pkgs::packageFile($_)) } @toCopy), $postinstall_rpms) };
-
-    log::l("copying Auto Install Floppy");
-    getAndSaveInstallFloppy($::o, "$postinstall_rpms/auto_install.img");
-}
-
-sub clean_postinstall_rpms() {
-    $postinstall_rpms and -d $postinstall_rpms and rm_rf($postinstall_rpms);
-}
-
-
-#-######################################################################################
-#- Specific Hardware to take into account and associated rpms to install
-#-######################################################################################
-sub allowNVIDIA_rpms {
-    my ($packages) = @_;
-    require pkgs;
-    if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
-	#- at this point, we can allow using NVIDIA 3D acceleration packages.
-	my @rpms;
-	foreach (keys %{$packages->{names}}) {
-	    my ($ext, $version, $release) = /kernel[^-]*(-smp|-enterprise|-secure)?(?:-(\d.*?)\.(\d+mdk))?$/ or next;
-	    my $p = pkgs::packageByName($packages, $_);
-	    pkgs::packageSelectedOrInstalled($p) or next;
-	    $version or ($version, $release) = (pkgs::packageVersion($p), pkgs::packageRelease($p));
-	    my $name = "NVIDIA_kernel-$version-$release$ext";
-	    pkgs::packageByName($packages, $name) or return;
-	    push @rpms, $name;
-	}
-	@rpms > 0 or return;
-	return [ @rpms, "NVIDIA_GLX" ];
-    }
-}
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub kernelVersion {
-    my ($o) = @_;
-    my $kernel = readlink "$o->{prefix}/boot/vmlinuz" || first(all("$o->{prefix}/boot"));
-    first($kernel =~ /vmlinuz-(.*)/);
-}
-
-
-sub getNextStep {
-    my ($s) = $::o->{steps}{first};
-    $s = $::o->{steps}{$s}{next} while $::o->{steps}{$s}{done} || !$::o->{steps}{$s}{reachable};
-    $s;
-}
-
-sub spawnShell {
-    return if $::o->{localInstall} || $::testing;
-
-    -x "/bin/sh" or die "cannot open shell - /bin/sh doesn't exist";
-
-    fork and return;
-
-    $ENV{DISPLAY} ||= ":0"; #- why not :pp
-
-    local *F;
-    sysopen F, "/dev/tty2", 2 or die "cannot open /dev/tty2 -- no shell will be provided";
-
-    open STDIN, "<&F" or die '';
-    open STDOUT, ">&F" or die '';
-    open STDERR, ">&F" or die '';
-    close F;
-
-    print any::drakx_version(), "\n";
-
-    c::setsid();
-
-    ioctl(STDIN, c::TIOCSCTTY(), 0) or warn "could not set new controlling tty: $!";
-
-    my $busybox = "/usr/bin/busybox";
-    exec {-e $busybox ? $busybox : "/bin/sh"} "/bin/sh" or log::l("exec of /bin/sh failed: $!");
-}
-
-sub getAvailableSpace {
-    my ($o) = @_;
-
-    #- make sure of this place to be available for installation, this could help a lot.
-    #- currently doing a very small install use 36Mb of postinstall-rpm, but installing
-    #- these packages may eat up to 90Mb (of course not all the server may be installed!).
-    #- 65mb may be a good choice to avoid almost all problem of insuficient space left...
-    my $minAvailableSize = 65 * sqr(1024);
-
-    my $n = !$::testing && getAvailableSpace_mounted($o->{prefix}) || 
-            getAvailableSpace_raw($o->{fstab}) * 512 / 1.07;
-    $n - max(0.1 * $n, $minAvailableSize);
-}
-
-sub getAvailableSpace_mounted {
-    my ($prefix) = @_;
-    my $dir = -d "$prefix/usr" ? "$prefix/usr" : "$prefix";
-    my (undef, $free) = MDK::Common::System::df($dir) or return;
-    log::l("getAvailableSpace_mounted $free KB");
-    $free * 1024 || 1;
-}
-sub getAvailableSpace_raw {
-    my ($fstab) = @_;
-
-    do { $_->{mntpoint} eq '/usr' and return $_->{size} } foreach @$fstab;
-    do { $_->{mntpoint} eq '/'    and return $_->{size} } foreach @$fstab;
-
-    if ($::testing) {
-	my $nb = 450;
-	log::l("taking ${nb}MB for testing");
-	return $nb << 11;
-    }
-    die "missing root partition";
-}
-
-sub preConfigureTimezone {
-    my ($o) = @_;
-    require timezone;
-   
-    #- can't be done in install cuz' timeconfig %post creates funny things
-    add2hash($o->{timezone}, { timezone::read($o->{prefix}) }) if $o->{isUpgrade};
-
-    $o->{timezone}{timezone} ||= timezone::bestTimezone(lang::lang2text($o->{lang}));
-
-    my $utc = $::expert && !grep { isFat($_) || isNT($_) } @{$o->{fstab}};
-    my $ntp = timezone::ntp_server($o->{prefix});
-    add2hash_($o->{timezone}, { UTC => $utc, ntp => $ntp });
-}
-
-sub setPackages {
-    my ($o) = @_;
-
-    require pkgs;
-    if (!$o->{packages} || is_empty_hash_ref($o->{packages}{names})) {
-	$o->{packages} = pkgs::psUsingHdlists($o->{prefix}, $o->{method});
-
-	pkgs::getDeps($o->{prefix}, $o->{packages});
-	pkgs::selectPackage($o->{packages},
-			    pkgs::packageByName($o->{packages}, 'basesystem') || die("missing basesystem package"), 1);
-
-	#- must be done after selecting base packages (to save memory)
-	pkgs::getProvides($o->{packages});
-
-	#- must be done after getProvides
-	pkgs::read_rpmsrate($o->{packages}, getFile("Mandrake/base/rpmsrate"));
-	($o->{compssUsers}, $o->{compssUsersSorted}) = pkgs::readCompssUsers($o->{meta_class});
-
-	#- preselect default_packages and compssUsersChoices.
-	setDefaultPackages($o);
-    } else {
-	#- this has to be done to make sure necessary files for urpmi are
-	#- present.
-	pkgs::psUpdateHdlistsDeps($o->{prefix}, $o->{method}, $o->{packages});
-    }
-}
-
-sub setDefaultPackages {
-    my ($o, $clean) = @_;
-
-    if ($clean) {
-	delete $o->{$_} foreach qw(default_packages compssUsersChoice); #- clean modified variables.
-    }
-
-    push @{$o->{default_packages}}, "nfs-utils-clients" if $o->{method} eq "nfs";
-    push @{$o->{default_packages}}, "numlock" if $o->{miscellaneous}{numlock};
-    push @{$o->{default_packages}}, "kernel22" if !$::oem && c::kernel_version() =~ /^\Q2.2/;
-    push @{$o->{default_packages}}, "raidtools" if !is_empty_array_ref($o->{all_hds}{raids});
-    push @{$o->{default_packages}}, "lvm" if !is_empty_array_ref($o->{all_hds}{lvms});
-    push @{$o->{default_packages}}, "alsa", "alsa-utils" if modules::get_alias("sound-slot-0") =~ /^snd-card-/;
-    push @{$o->{default_packages}}, uniq(grep {$_} map { fsedit::package_needed_for_partition_type($_) } @{$o->{fstab}});
-
-    #- if no cleaning needed, populate by default, clean is used for second or more call to this function.
-    unless ($clean) {
-	if ($::auto_install && ($o->{compssUsersChoice} || {})->{ALL}) {
-	    $o->{compssUsersChoice}{$_} = 1 foreach map { @{$o->{compssUsers}{$_}{flags}} } @{$o->{compssUsersSorted}};
-	}
-	if (!$o->{compssUsersChoice} && !$o->{isUpgrade}) {
-	    #- by default, choose:
-	    if ($o->{meta_class} eq 'server') {
-		$o->{compssUsersChoice}{$_} = 1 foreach 'X', 'MONITORING', 'NETWORKING_REMOTE_ACCESS_SERVER';
-	    } else {
-		$o->{compssUsersChoice}{$_} = 1 foreach 'GNOME', 'KDE', 'CONFIG', 'X';
-		$o->{lang} eq 'eu_ES' and $o->{compssUsersChoice}{KDE} = 0;
-		$o->{compssUsersChoice}{$_} = 1
-		  foreach map { @{$o->{compssUsers}{$_}{flags}} } 'Workstation|Office Workstation', 'Workstation|Internet station';
-	    }
-	}
-    }
-    $o->{compssUsersChoice}{uc($_)} = 1 foreach grep { modules::probe_category("multimedia/$_") } modules::sub_categories('multimedia');
-    $o->{compssUsersChoice}{uc($_)} = 1 foreach map { $_->{driver} =~ /Flag:(.*)/ } detect_devices::probeall();
-    $o->{compssUsersChoice}{SYSTEM} = 1;
-    $o->{compssUsersChoice}{DOCS} = !$o->{excludedocs};
-    $o->{compssUsersChoice}{BURNER} = 1 if detect_devices::burners();
-    $o->{compssUsersChoice}{DVD} = 1 if detect_devices::dvdroms();
-    $o->{compssUsersChoice}{USB} = 1 if modules::get_alias("usb-interface");
-    $o->{compssUsersChoice}{PCMCIA} = 1 if detect_devices::hasPCMCIA();
-    $o->{compssUsersChoice}{HIGH_SECURITY} = 1 if $o->{security} > 3;
-    $o->{compssUsersChoice}{BIGMEM} = 1 if !$::oem && (availableRamMB() > 800) && (arch() !~ /ia64/);
-    $o->{compssUsersChoice}{SMP} = 1 if detect_devices::hasSMP();
-    $o->{compssUsersChoice}{'3D'} = 1 if 
-      detect_devices::matching_desc('Matrox.* G[245][05]0') ||
-      detect_devices::matching_desc('Rage X[CL]') ||
-      detect_devices::matching_desc('3D Rage (?:LT|Pro)') ||
-      detect_devices::matching_desc('Voodoo [35]') ||
-      detect_devices::matching_desc('Voodoo Banshee') ||
-      detect_devices::matching_desc('8281[05].* CGC') ||
-      detect_devices::matching_desc('Rage 128') ||
-      detect_devices::matching_desc('Radeon ') && !detect_devices::matching_desc('Radeon 8500') ||
-      detect_devices::matching_desc('[nN]Vidia.*T[nN]T2') || #- TNT2 cards
-      detect_devices::matching_desc('[nN]Vidia.*NV[56]') ||
-      detect_devices::matching_desc('[nN]Vidia.*Vanta') ||
-      detect_devices::matching_desc('[nN]Vidia.*GeForce') || #- GeForce cards
-      detect_devices::matching_desc('[nN]Vidia.*NV1[15]') ||
-      detect_devices::matching_desc('[nN]Vidia.*Quadro');
-
-
-    foreach (map { substr($_, 0, 2) } lang::langs($o->{langs})) {
-	pkgs::packageByName($o->{packages}, "locales-$_") or next;
-	push @{$o->{default_packages}}, "locales-$_";
-	$o->{compssUsersChoice}{qq(LOCALES"$_")} = 1; #- mainly for zh in case of zh_TW.Big5
-    }
-    foreach (lang::langsLANGUAGE($o->{langs})) {
-	$o->{compssUsersChoice}{qq(LOCALES"$_")} = 1;
-    }
-    $o->{compssUsersChoice}{'CHARSET"' . lang::lang2charset($o->{lang}) . '"'} = 1;
-}
-
-sub unselectMostPackages {
-    my ($o) = @_;
-    pkgs::unselectAllPackages($o->{packages});
-    pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || next) foreach @{$o->{default_packages}};
-}
-
-sub warnAboutNaughtyServers {
-    my ($o) = @_;
-    my @naughtyServers = pkgs::naughtyServers($o->{packages}) or return 1;
-    if (!$o->ask_yesorno('', 
-formatAlaTeX(_("You have selected the following server(s): %s
-
-
-These servers are activated by default. They don't have any known security
-issues, but some new could be found. In that case, you must make sure to upgrade
-as soon as possible.
-
-
-Do you really want to install these servers?
-", join(", ", @naughtyServers))), 1)) {
-	pkgs::unselectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_)) foreach @naughtyServers;
-    }
-}
-
-sub addToBeDone(&$) {
-    my ($f, $step) = @_;
-
-    return &$f() if $::o->{steps}{$step}{done};
-
-    push @{$::o->{steps}{$step}{toBeDone}}, $f;
-}
-
-sub setAuthentication {
-    my ($o) = @_;
-    my ($shadow, $md5, $ldap, $nis) = @{$o->{authentication} || {}}{qw(shadow md5 LDAP NIS)};
-    my $p = $o->{prefix};
-    #- obsoleted always enabled (in /etc/pam.d/system-auth furthermore) #any::enableMD5Shadow($p, $shadow, $md5);
-    any::enableShadow($p) if $shadow;
-    if ($ldap) {
-	$o->pkg_install(qw(chkauth openldap-clients nss_ldap pam_ldap));
-	run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "ldap", "-D", $o->{netc}{LDAPDOMAIN}, "-s", $ldap);
-    } elsif ($nis) {
-	#$o->pkg_install(qw(chkauth ypbind yp-tools net-tools));
-	#run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "yp", $domain, "-s", $nis);
-	$o->pkg_install("ypbind");
-	my $domain = $o->{netc}{NISDOMAIN};
-	$domain || $nis ne "broadcast" or die _("Can't use broadcast with no NIS domain");
-	my $t = $domain ? "domain $domain" . ($nis ne "broadcast" && " server")
-	                : "ypserver";
-	substInFile {
-	    $_ = "#~$_" unless /^#/;
-	    $_ .= "$t $nis\n" if eof;
-	} "$p/etc/yp.conf";
-	require network;
-	network::write_conf("$p/etc/sysconfig/network", $o->{netc});
-    }
-}
-
-sub killCardServices {
-    my $pid = chomp_(cat_("/tmp/cardmgr.pid"));
-    $pid and kill(15, $pid); #- send SIGTERM
-}
-
-sub unlockCdrom(;$) {
-    my ($cdrom) = @_;
-    $cdrom or cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
-    eval { $cdrom and ioctl detect_devices::tryOpen($1), c::CDROM_LOCKDOOR(), 0 };
-}
-sub ejectCdrom(;$) {
-    my ($cdrom) = @_;
-    getFile("XXX"); #- close still opened filehandle
-    $cdrom ||= $1 if cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image),;
-    if ($cdrom) {
-	#- umount BEFORE opening the cdrom device otherwise the umount will
-	#- D state if the cdrom is already removed
-	eval { fs::umount("/tmp/image") };
-	if ($@) { log::l("files still open: ", readlink($_)) foreach map { glob_("$_/fd/*") } glob_("/proc/*") }
-	eval { ioctl detect_devices::tryOpen($cdrom), c::CDROMEJECT(), 1 };	
-    }
-}
-
-sub setupFB {
-    my ($o, $vga) = @_;
-
-    $vga ||= 785; #- assume at least 640x480x16.
-
-    require bootloader;
-    #- update bootloader entries with vga, all kernel are now framebuffer.
-    foreach (qw(vmlinuz vmlinuz-secure vmlinuz-smp vmlinuz-hack)) {
-	if (my $e = bootloader::get("/boot/$_", $o->{bootloader})) {
-	    $e->{vga} = $vga;
-	}
-    }
-    bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
-    1;
-}
-
-sub hdInstallPath() {
-    my $tail = first(readlink("/tmp/image") =~ m|^/tmp/hdimage/(.*)|);
-    my $head = first(readlink("/tmp/hdimage") =~ m|$::o->{prefix}(.*)|);
-    $tail && ($head ? "$head/$tail" : "/mnt/hd/$tail");
-}
-
-sub install_urpmi {
-    my ($prefix, $method, $mediums) = @_;
-
-    #- rare case where urpmi cannot be installed (no hd install path).
-    $method eq 'disk' && !hdInstallPath() and return;
-
-    my @cfg = map {
-	my $name = $_->{fakemedium};
-
-	local *LIST;
-	my $mask = umask 077;
-	open LIST, ">$prefix/var/lib/urpmi/list.$name" or log::l("failed to write list.$name");
-	umask $mask;
-
-	my $dir = ($_->{prefix} || ${{ nfs => "file://mnt/nfs", 
-				       disk => "file:/" . hdInstallPath(),
-				       ftp => $ENV{URLPREFIX},
-				       http => $ENV{URLPREFIX},
-				       cdrom => "removable://mnt/cdrom" }}{$method}) . "/$_->{rpmsdir}";
-
-	local *FILES; open FILES, "$ENV{LD_LOADER} parsehdlist /tmp/$_->{hdlist} |";
-	print LIST "$dir/$_\n" foreach chomp_(<FILES>);
-	close FILES or log::l("parsehdlist failed"), return;
-	close LIST;
-
-	#- build synthesis file if there are still not existing (ie not copied from mirror).
-	if (-s "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz" <= 32) {
-	    unlink "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz";
-	    run_program::rooted($prefix, "parsehdlist", ">", "/var/lib/urpmi/synthesis.hdlist.$name",
-				"--synthesis", "/var/lib/urpmi/hdlist.$name.cz");
-	    run_program::rooted($prefix, "gzip", "-S", ".cz", "/var/lib/urpmi/synthesis.hdlist.$name");
-	}
-
-	my ($qname, $qdir) = ($name, $dir);
-	$qname =~ s/(\s)/\\$1/g; $qdir =~ s/(\s)/\\$1/g;
-
-	#- output new urpmi.cfg format here.
-	"$qname " . ($dir !~ /^(ftp|http)/ && $qdir) . " {
-  hdlist: hdlist.$name.cz
-  with_hdlist: ../base/" . ($_->{update} ? "hdlist.cz" : $_->{hdlist}) . "
-  list: list.$name" . ($dir =~ /removable:/ && "
-  removable: /dev/cdrom") . ($_->{update} && "
-  update") . "
-}
-
-";
-    } sort { $a->{medium} <=> $b->{medium} } values %$mediums;
-    eval { output "$prefix/etc/urpmi/urpmi.cfg", @cfg };
-}
-
-
-#-###############################################################################
-#- kde stuff
-#-###############################################################################
-sub kderc_largedisplay {
-    my ($prefix) = @_;
-
-    update_gnomekderc($_, 'KDE', 
-		     Contrast => 7,
-		     kfmIconStyle => "Large",
-		     kpanelIconStyle => "Normal", #- to change to Large when icons looks better
-		     KDEIconStyle => "Large") foreach list_skels($prefix, '.kderc');
-
-    substInFile {
-	s/^(GridWidth)=85/$1=100/;
-	s/^(GridHeight)=70/$1=75/;
-    } $_ foreach list_skels($prefix, '.kde/share/config/kfmrc');
-}
-
-sub kdeicons_postinstall {
-    my ($prefix) = @_;
-
-    #- parse etc/fstab file to search for dos/win, floppy, zip, cdroms icons.
-    #- handle both supermount and fsdev usage.
-    my %l = (
-	     'cdrom' => [ 'cdrom', 'Cd-Rom' ],
-	     'zip' => [ 'zip', 'Zip' ],
-	     'floppy-ls' => [ 'floppy', 'LS-120' ],
-	     'floppy' => [ 'floppy', 'Floppy' ],
-    );
-    foreach (fs::read_fstab($prefix, "/etc/fstab")) {
-
-	my ($name_, $nb) = $_->{mntpoint} =~ m|.*/(\S+?)(\d*)$/|;
-	my ($name, $text) = @{$l{$name_} || []};
-
-	my $f = ${{
-	    supermount => sub { $name .= '.fsdev' if $name },
-	    vfat => sub { $name = 'Dos_'; $text = $name_ },
-	}}{$_->{type}};
-	&$f if $f;
-
-	template2userfile($prefix, 
-			  "$ENV{SHARE_PATH}/$name.kdelnk.in",
-			  "Desktop/$text" .  ($nb && " $nb"). ".kdelnk",
-			  1, %$_) if $name;
-    }
-
-    # rename the .kdelnk to the name found in the .kdelnk as kde doesn't use it
-    # for displaying
-    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
-	foreach (grep { /\.kdelnk$/ } all($dir)) {
-	    cat_("$dir/$_") =~ /^Name\[\Q$ENV{LANG}\E\]=(.{2,14})$/m
-	      and rename "$dir/$_", "$dir/$1.kdelnk";
-	}
-    }
-}
-
-sub kdemove_desktop_file {
-    my ($prefix) = @_;
-    my @toMove = qw(doc.kdelnk news.kdelnk updates.kdelnk home.kdelnk printer.kdelnk floppy.kdelnk cdrom.kdelnk FLOPPY.kdelnk CDROM.kdelnk);
-
-    #- remove any existing save in Trash of each user and
-    #- move appropriate file there after an upgrade.
-    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
-	renamef("$dir/$_", "$dir/Trash/$_") 
-	  foreach grep { -e "$dir/$_" } @toMove, grep { /\.rpmorig$/ } all($dir)
-    }
-}
-
-
-#-###############################################################################
-#- auto_install stuff
-#-###############################################################################
-sub auto_inst_file() { ($::g_auto_install ? "/tmp" : "$::o->{prefix}/root/drakx") . "/auto_inst.cfg.pl" }
-
-sub report_bug {
-    my ($prefix) = @_;
-    any::report_bug($prefix, 'auto_inst' => g_auto_install('', 1));
-}
-
-sub g_auto_install {
-    my ($replay, $respect_privacy) = @_;
-    my $o = {};
-
-    require pkgs;
-    $o->{default_packages} = pkgs::selected_leaves($::o->{packages});
-
-    my @fields = qw(mntpoint type size);
-    $o->{partitions} = [ map { my %l; @l{@fields} = @$_{@fields}; \%l } grep { $_->{mntpoint} } @{$::o->{fstab}} ];
-    
-    exists $::o->{$_} and $o->{$_} = $::o->{$_} foreach qw(lang authentication mouse wacom netc timezone superuser intf keyboard users partitioning isUpgrade manualFstab nomouseprobe crypto security netcnx useSupermount autoExitInstall mkbootdisk); #- TODO modules bootloader 
-
-    if (my $printer = $::o->{printer}) {
-	$o->{printer}{$_} = $::o->{printer}{$_} foreach qw(SPOOLER DEFAULT BROWSEPOLLADDR BROWSEPOLLPORT MANUALCUPSCONFIG);
-	$o->{printer}{configured} = {};
-	foreach my $queue (keys %{$::o->{printer}{configured}}) {
-	    my $val = $::o->{printer}{configured}{$queue}{queuedata};
-	    exists $val->{$_} and $o->{printer}{configured}{$queue}{queuedata}{$_} = $val->{$_} foreach keys %{$val || {}};
-	}
-    }
-
-    if (my $card = $::o->{X}{card}) {
-	$o->{X}{$_} = $::o->{X}{$_} foreach qw(default_depth resolution_wanted);
-	if ($o->{X}{default_depth} and my $depth = $card->{depth}{$o->{X}{default_depth}}) {
-	    $depth ||= [];
-	    $o->{X}{resolution_wanted} ||= join "x", @{$depth->[0]} unless is_empty_array_ref($depth->[0]);
-	    $o->{X}{monitor} = $::o->{X}{monitor} if $::o->{X}{monitor}{manual};
-	}
-    }
-
-    local $o->{partitioning}{auto_allocate} = !$replay;
-    $o->{autoExitInstall} = !$replay;
-    $o->{interactiveSteps} = [ 'doPartitionDisks', 'formatPartitions'] if $replay;
-
-    #- deep copy because we're modifying it below
-    $o->{users} = [ @{$o->{users} || []} ];
-
-    my @user_info_to_remove = (
-	if_($respect_privacy, qw(name realname home pw)), 
-	qw(oldu oldg password password2),
-    );
-    $_ = { %{$_ || {}} }, delete @$_{@user_info_to_remove} foreach $o->{superuser}, @{$o->{users} || []};
-
-    if ($respect_privacy && $o->{netcnx}) {
-	if (my $type = $o->{netcnx}{type}) {
-	    my @netcnx_type_to_remove = qw(passwd passwd2 login phone_in phone_out);
-	    $_ = { %{$_ || {}} }, delete @$_{@netcnx_type_to_remove} foreach $o->{netcnx}{$type};
-	}
-    }
-    
-    require Data::Dumper;
-    my $str = join('', 
-"#!/usr/bin/perl -cw
-#
-# You should check the syntax of this file before using it in an auto-install.
-# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
-# (note the '#!/usr/bin/perl -cw' on the first line).
-", Data::Dumper->Dump([$o], ['$o']), "\0");
-    $str =~ s/ {8}/\t/g; #- replace all 8 space char by only one tabulation, this reduces file size so much :-)
-    $str;
-}
-
-sub getAndSaveInstallFloppy {
-    my ($o, $where) = @_;
-    if ($postinstall_rpms && -d $postinstall_rpms && -r "$postinstall_rpms/auto_install.img") {
-	log::l("getAndSaveInstallFloppy: using file saved as $postinstall_rpms/auto_install.img");
-	cp_af("$postinstall_rpms/auto_install.img", $where);
-    } else {
-	my $image = cat_("/proc/cmdline") =~ /pcmcia/ ? "pcmcia" :
-	  ${{ disk => 'hd', cdrom => 'cdrom', ftp => 'network', nfs => 'network', http => 'network' }}{$o->{method}};
-	$image .= arch() =~ /sparc64/ && "64"; #- for sparc64 there are a specific set of image.
-	getAndSaveFile("images/$image.img", $where) or log::l("failed to write Install Floppy ($image.img) to $where"), return;
-    }
-    1;
-}
-
-sub getAndSaveAutoInstallFloppy {
-    my ($o, $replay, $where) = @_;
-
-    eval { modules::load('loop') };
-
-    if (arch() =~ /sparc/) {
-	my $imagefile = "$o->{prefix}/tmp/autoinst.img";
-	my $mountdir = "$o->{prefix}/tmp/mount"; -d $mountdir or mkdir $mountdir, 0755;
-	my $workdir = "$o->{prefix}/tmp/work"; -d $workdir or rmdir $workdir;
-
-	getAndSaveInstallFloppy($o, $imagefile) or return;
-        devices::make($_) foreach qw(/dev/loop6 /dev/ram);
-
-        run_program::run("losetup", "/dev/loop6", $imagefile);
-        fs::mount("/dev/loop6", $mountdir, "romfs", 'readonly');
-        cp_af($mountdir, $workdir);
-        fs::umount($mountdir);
-        run_program::run("losetup", "-d", "/dev/loop6");
-
-	substInFile { s/timeout.*//; s/^(\s*append\s*=\s*\".*)\"/$1 kickstart=floppy\"/ } "$workdir/silo.conf"; #" for po
-#-TODO	output "$workdir/ks.cfg", generate_ks_cfg($o);
-	output "$workdir/boot.msg", "\n7m",
-"!! If you press enter, an auto-install is going to start.
-    ALL data on this computer is going to be lost,
-    including any Windows partitions !!
-", "7m\n";
-
-	local $o->{partitioning}{clearall} = 1;
-	output("$workdir/auto_inst.cfg", g_auto_install());
-
-        run_program::run("genromfs", "-d", $workdir, "-f", "/dev/ram", "-A", "2048,/..", "-a", "512", "-V", "DrakX autoinst");
-        fs::mount("/dev/ram", $mountdir, 'romfs', 0);
-        run_program::run("silo", "-r", $mountdir, "-F", "-i", "/fd.b", "-b", "/second.b", "-C", "/silo.conf");
-        fs::umount($mountdir);
-	require commands;
-        commands::dd("if=/dev/ram", "of=$where", "bs=1440", "count=1024");
-
-        rm_rf($workdir, $mountdir, $imagefile);
-    } elsif (arch() =~ /ia64/) {
-	#- nothing yet
-    } else {
-	my $imagefile = "$o->{prefix}/root/autoinst.img";
-	my $mountdir = "$o->{prefix}/root/aif-mount"; -d $mountdir or mkdir $mountdir, 0755;
-
-	my $param = 'kickstart=floppy ' . generate_automatic_stage1_params($o);
-
-	getAndSaveInstallFloppy($o, $imagefile) or return;
-
-	my $dev = devices::set_loop($imagefile) or log::l("couldn't set loopback device"), return;
-        fs::mount($dev, $mountdir, 'vfat', 0);
-
-	substInFile { 
-	    s/timeout.*/$replay ? 'timeout 1' : ''/e;
-	    s/^(\s*append)/$1 $param/ 
-	} "$mountdir/syslinux.cfg";
-
-	unlink "$mountdir/help.msg";
-	output "$mountdir/boot.msg", "\n0c",
-"!! If you press enter, an auto-install is going to start.
-   All data on this computer is going to be lost,
-   including any Windows partitions !!
-", "07\n" if !$replay;
-
-	local $o->{partitioning}{clearall} = !$replay;
-	eval { output("$mountdir/auto_inst.cfg", g_auto_install($replay)); };
-	$@ and log::l("Warning: <$@>");
-
-	fs::umount($mountdir);
-	rmdir $mountdir;
-	devices::del_loop($dev);
-	require commands;
-	commands::dd("if=$imagefile", "of=$where", "bs=1440", "count=1024");
-	unlink $imagefile;
-    }
-    1;
-}
-
-
-sub g_default_packages {
-    my ($o, $quiet) = @_;
-
-    my $floppy = detect_devices::floppy();
-
-    while (1) {
-	$o->ask_okcancel('', _("Insert a FAT formatted floppy in drive %s", $floppy), 1) or return;
-
-	eval { fs::mount(devices::make($floppy), "/floppy", "vfat", 0) };
-	last if !$@;
-	$o->ask_warn('', _("This floppy is not FAT formatted"));
-    }
-
-    require Data::Dumper;
-    my $str = Data::Dumper->Dump([ { default_packages => pkgs::selected_leaves($o->{packages}) } ], ['$o']);
-    $str =~ s/ {8}/\t/g;
-    output('/floppy/auto_inst.cfg', 
-	   "# You should always check the syntax with 'perl -cw auto_inst.cfg.pl'\n",
-	   "# before testing.  To use it, boot with ``linux defcfg=floppy''\n",
-	   $str, "\0");
-    fs::umount("/floppy");
-
-    $quiet or $o->ask_warn('', _("To use this saved packages selection, boot installation with ``linux defcfg=floppy''"));
-}
-
-sub loadO {
-    my ($O, $f) = @_; $f ||= auto_inst_file;
-    my $o;
-    if ($f =~ /^(floppy|patch)$/) {
-	my $f = $f eq "floppy" ? 'auto_inst.cfg' : "patch";
-	unless ($::testing) {
-	    fs::mount(devices::make(detect_devices::floppy()), "/mnt", (arch() =~ /sparc/ ? "romfs" : "vfat"), 'readonly');
-	    $f = "/mnt/$f";
-	}
-	-e $f or $f .= '.pl';
-
-	my $b = before_leaving {
-	    fs::umount("/mnt") unless $::testing;
-	    modules::unload(qw(vfat fat));
-	};
-	$o = loadO($O, $f);
-    } else {
-	-e "$f.pl" and $f .= ".pl" unless -e $f;
-
-	my $fh = -e $f ? do { local *F; open F, $f; *F } : getFile($f) or die _("Error reading file %s", $f);
-	{
-	    local $/ = "\0";
-	    no strict;
-	    eval <$fh>;
-	    close $fh;
-	    $@ and die;
-	}
-	add2hash_($o ||= {}, $O);
-    }
-    bless $o, ref $O;
-}
-
-sub generate_automatic_stage1_params {
-    my ($o) = @_;
-
-    my @ks = "method:$o->{method}";
-
-    if ($o->{method} eq 'http') {
-	"$ENV{URLPREFIX}" =~ m|http://([^/:]+)/(.*)| or die;
-	push @ks, "server:$1", "directory:$2";
-    } elsif ($o->{method} eq 'ftp') {
-	push @ks,  "server:$ENV{HOST}", "directory:$ENV{PREFIX}", "user:$ENV{LOGIN}", "pass:$ENV{PASSWORD}";
-    } elsif ($o->{method} eq 'nfs') {
-	cat_("/proc/mounts") =~ m|(\S+):(\S+)\s+/tmp/image nfs| or die;
-	push @ks, "server:$1", "directory:$2";
-    }
-
-    if (member($o->{method}, qw(http ftp nfs))) {
-	my ($intf) = values %{$o->{intf}};
-	push @ks, "interface:$intf->{DEVICE}";
-	if ($intf->{BOOTPROTO} eq 'dhcp') {
-	    push @ks, "network:dhcp";
-	} else {
-	    require network;
-	    push @ks, "network:static", "ip:$intf->{IPADDR}", "netmask:$intf->{NETMASK}", "gateway:$o->{netc}{GATEWAY}";
-	    my @dnss = network::dnsServers($o->{netc});
-	    push @ks, "dns:$dnss[0]" if @dnss;
-	}
-    }
-    
-    "automatic=".join(',', @ks);
-}
-
-sub guess_mount_point {
-    my ($part, $prefix, $user) = @_;
-
-    my %l = (
-	     '/'     => 'etc/fstab',
-	     '/boot' => 'vmlinuz',
-	     '/tmp'  => '.X11-unix',
-	     '/usr'  => 'X11R6',
-	     '/var'  => 'catman',
-	    );
-
-    my $handle = any::inspect($part, $prefix) or return;
-    my $d = $handle->{dir};
-    my ($mnt) = grep { -e "$d/$l{$_}" } keys %l;
-    $mnt ||= (stat("$d/.bashrc"))[4] ? '/root' : '/home/user' . ++$$user if -e "$d/.bashrc";
-    $mnt ||= (grep { -d $_ && (stat($_))[4] >= 500 && -e "$_/.bashrc" } glob_("$d")) ? '/home' : '';
-    ($mnt, $handle);
-}
-
-sub suggest_mount_points {
-    my ($fstab, $prefix, $uniq) = @_;
-
-    my $user;
-    foreach my $part (grep { isTrueFS($_) } @$fstab) {
-	$part->{mntpoint} && !$part->{unsafeMntpoint} and next; #- if already found via an fstab
-
-	my ($mnt, $handle) = guess_mount_point($part, $prefix, \$user) or next;
-
-	next if $uniq && fsedit::mntpoint2part($mnt, $fstab);
-	$part->{mntpoint} = $mnt; delete $part->{unsafeMntpoint};
-
-	#- try to find other mount points via fstab
-	fs::merge_info_from_fstab($fstab, $handle->{dir}, $uniq, 'loose') if $mnt eq '/';
-    }
-    $_->{mntpoint} and log::l("suggest_mount_points: $_->{device} -> $_->{mntpoint}") foreach @$fstab;
-}
-
-#- mainly for finding the root partitions for upgrade
-sub find_root_parts {
-    my ($fstab, $prefix) = @_;
-    log::l("find_root_parts");
-    my $user;
-    grep { 
-	my ($mnt) = guess_mount_point($_, $prefix, \$user);
-	$mnt eq '/';
-    } @$fstab;
-}
-sub use_root_part {
-    my ($all_hds, $part, $prefix) = @_;
-    my $fstab = [ fsedit::get_really_all_fstab($all_hds) ];
-    {
-	my $handle = any::inspect($part, $prefix) or die;
-	fs::merge_info_from_fstab($fstab, $handle->{dir}, 'uniq');
-    }
-    map { $_->{mntpoint} = 'swap' } grep { isSwap($_) } @$fstab; #- use all available swap.
-}
-
-sub getHds {
-    my ($o, $f_err) = @_;
-    my $ok = 1;
-    my $try_scsi = !$::expert;
-    my $flags = $o->{partitioning};
-
-    my @drives = detect_devices::hds();
-#    add2hash_($o->{partitioning}, { readonly => 1 }) if partition_table_raw::typeOfMBR($drives[0]{device}) eq 'system_commander';
-
-  getHds: 
-    my $all_hds = catch_cdie { fsedit::hds(\@drives, $flags) }
-      sub {
-	  $ok = 0;
-	  my $err = formatError($@);
-	  log::l("error reading partition table: $err");
-	  !$flags->{readonly} && $f_err and $f_err->($err);
-      };
-    my $hds = $all_hds->{hds};
-
-    if (is_empty_array_ref($hds) && $try_scsi) {
-	$try_scsi = 0;
-	$o->setupSCSI; #- ask for an unautodetected scsi card
-	goto getHds;
-    }
-    if (!$::testing) {
-	@$hds = grep { eval { partition_table_raw::test_for_bad_drives($_) }; !$@ } @$hds;
-    }
-
-    $ok = fsedit::verifyHds($hds, $flags->{readonly}, $ok)
-        if !($flags->{clearall} || $flags->{clear});
-
-    #- try to figure out if the same number of hds is available, use them if ok.
-    $ok && $hds && @$hds > 0 && @{$o->{all_hds}{hds} || []} == @$hds and return $ok;
-
-    fs::get_raw_hds('', $all_hds);
-    fs::add2all_hds($all_hds, @{$o->{manualFstab}});
-
-    $o->{all_hds} = $all_hds;
-    $o->{fstab} = [ fsedit::get_all_fstab($all_hds) ];
-    fs::merge_info_from_mtab($o->{fstab});
-
-    my @win = grep { isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) }) } @{$o->{fstab}};
-    log::l("win parts: ", join ",", map { $_->{device} } @win) if @win;
-    if (@win == 1) {
-	#- Suggest /boot/efi on ia64.
-	$win[0]{mntpoint} = arch() =~ /ia64/ ? "/boot/efi" : "/mnt/windows";
-    } else {
-	my %w; foreach (@win) {
-	    my $v = $w{$_->{device_windobe}}++;
-	    $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/win_" . lc($_->{device_windobe}) . ($v ? $v+1 : ''); #- lc cuz of StartOffice(!) cf dadou
-	}
-    }
-
-    my @sunos = grep { isSunOS($_) && type2name($_->{type}) =~ /root/i } @{$o->{fstab}}; #- take only into account root partitions.
-    if (@sunos) {
-	my $v = '';
-	map { $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/sunos" . ($v && ++$v) } @sunos;
-    }
-    #- a good job is to mount SunOS root partition, and to use mount point described here in /etc/vfstab.
-
-    $ok;
-}
-
-sub log_sizes {
-    my ($o) = @_;
-    my @df = MDK::Common::System::df($o->{prefix});
-    log::l(sprintf "Installed: %s(df), %s(rpm)",
-	   formatXiB($df[0] - $df[1], 1024),
-	   formatXiB(sum(`$ENV{LD_LOADER} rpm --root $o->{prefix}/ -qa --queryformat "%{size}\n"`))) if -x "$o->{prefix}/bin/rpm";
-}
-
-sub copy_advertising {
-    my ($o) = @_;
-
-    return if $::rootwidth < 800;
-
-    my $f;
-    my $source_dir = "Mandrake/share/advertising";
-    foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
-	$f = getFile("$source_dir$_/list") or next;
-	$source_dir = "$source_dir$_";
-    }
-    if (my @files = <$f>) {
-	my $dir = "$o->{prefix}/tmp/drakx-images";
-	mkdir $dir;
-	unlink glob_("$dir/*");
-	foreach (@files) {
-	    chomp;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.png/\.pl/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.pl/_icon\.png/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/_icon\.png/\.png/;
-	}
-	@advertising_images = map { "$dir/$_" } @files;
-    }
-}
-
-sub remove_advertising {
-    my ($o) = @_;
-    eval { rm_rf("$o->{prefix}/tmp/drakx-images") };
-    @advertising_images = ();
-}
-
-sub disable_user_view {
-    my ($prefix) = @_;
-    substInFile { s/^UserView=.*/UserView=true/ } "$prefix/usr/share/config/kdm/kdmrc";
-    substInFile { s/^Browser=.*/Browser=0/ } "$prefix/etc/X11/gdm/gdm.conf";
-}
-
-sub write_fstab {
-    my ($o) = @_;
-    fs::write_fstab($o->{all_hds}, $o->{prefix}) if !$::live;
-}
-
-my @bigseldom_used_groups = (
-);
-
-sub check_prog {
-    my ($f) = @_;
-
-    my @l = $f !~ m|^/| ?
-        map { "$_/$f" } split(":", $ENV{PATH}) :
-	$f;
-    return if grep { -x $_ } @l;
-
-    common::usingRamdisk() or log::l("ERROR: check_prog can't find the program $f and we're not using ramdisk"), return;
-
-    my ($f_) = map { m|^/| ? $_ : "/usr/bin/$_" } $f;
-    remove_bigseldom_used();
-    foreach (@bigseldom_used_groups) {
-	my (@l) = map { m|^/| ? $_ : "/usr/bin/$_" } @$_;
-	if (member($f_, @l)) {
-	    foreach (@l) {
-		getAndSaveFile($_);
-		chmod 0755, $_;
-	    }
-	    return;
-	}
-    }
-    getAndSaveFile($f_);
-    chmod 0755, $f_;
-}
-
-sub remove_unused {
-    $::testing and return;
-    if ($::o->isa('interactive_gtk')) {
-	unlink glob_("/lib/lib$_*") foreach qw(slang newt);
-	unlink "/usr/bin/perl-install/auto/Newt/Newt.so";
-    } else {
-	unlink glob_("/usr/X11R6/bin/XF*");
-    }
-}
-
-sub remove_bigseldom_used {
-    log::l("remove_bigseldom_used");
-    $::testing and return;
-    remove_unused();
-    unlink "/usr/X11R6/lib/modules/xf86Wacom.so";
-    unlink glob_("/usr/share/gtk/themes/$_*") foreach qw(marble3d);
-    unlink(m|^/| ? $_ : "/usr/bin/$_") foreach 
-      ((map { @$_ } @bigseldom_used_groups),
-       qw(pvcreate pvdisplay vgchange vgcreate vgdisplay vgextend vgremove vgscan lvcreate lvdisplay lvremove /lib/liblvm.so),
-       qw(mkreiserfs resize_reiserfs mkfs.xfs),
-      );
-}
-
-################################################################################
-package pkgs_interactive;
-use run_program;
-use common;
-use pkgs;
-
-sub install_steps::do_pkgs {
-    my ($o) = @_;
-    bless { o => $o }, 'pkgs_interactive';
-}
-
-sub install {
-    my ($do, @l) = @_;
-    $do->{o}->pkg_install(@l);
-}
-
-sub is_installed {
-    my ($do, @l) = @_;
-    foreach (@l) {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	$p && pkgs::packageFlagSelected($p) or return;
-    }
-    1;
-}
-
-sub remove {
-    my ($do, @l) = @_;
-
-    @l = grep {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	pkgs::unselectPackage($do->{o}->{packages}, $p) if $p;
-	$p;
-    } @l;
-    run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', @l);
-}
-
-sub remove_nodeps {
-    my ($do, @l) = @_;
-
-    @l = grep {
-	my $p = pkgs::packageByName($do->{o}->{packages}, $_);
-	pkgs::packageSetFlagSelected($p, 0) if $p;
-	$p;
-    } @l;
-    run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', '--nodeps', @l);
-}
-################################################################################
-
-package install_any;
-
-1;
diff --git a/perl-install/install_gtk.pm b/perl-install/install_gtk.pm
deleted file mode 100644
index a30298158..000000000
--- a/perl-install/install_gtk.pm
+++ /dev/null
@@ -1,440 +0,0 @@
-package install_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use my_gtk qw(:helpers :wrappers);
-use common;
-use lang;
-use devices;
-
-#-#####################################################################################
-#-INTERN CONSTANT
-#-#####################################################################################
-my @themes_vga16 = qw(blue blackwhite savane);
-my @themes_desktop = qw(mdk-Desktop marble3d);
-my @themes_firewall = qw(mdk-Firewall);
-my @themes = qw(mdk marble3d);
-
-my (@background1, @background2);
-
-
-#------------------------------------------------------------------------------
-sub load_rc {
-    my ($name) = @_;
-
-    if (my ($f) = grep { -r $_ } map { "$_/$name.rc" } ("share", $ENV{SHARE_PATH}, dirname(__FILE__))) {
-	Gtk::Rc->parse($f);
-	foreach (cat_($f)) {
-	    if (/style\s+"background"/ .. /^\s*$/) {
-		@background1 = map { $_ * 256 * 257 } split ',', $1 if /NORMAL.*\{(.*)\}/;
-		@background2 = map { $_ * 256 * 257 } split ',', $1 if /PRELIGHT.*\{(.*)\}/;
-	    }
-	}
-    }
-}
-
-sub default_theme {
-    my ($o) = @_;
-    @themes = @themes_desktop if $o->{meta_class} eq 'desktop';
-    @themes = @themes_firewall if $o->{meta_class} eq 'firewall';
-    @themes = @themes_vga16 if $o->{simple_themes} || $o->{vga16};
-    install_theme($o, $o->{theme} || $themes[0]);
-}
-
-#------------------------------------------------------------------------------
-sub install_theme {
-    my ($o, $theme) = @_;
-
-    $o->{theme} = $theme || $o->{theme};
-
-    load_rc($_) foreach "themes-$o->{theme}", "install", "themes";
-
-    if (my ($font, $font2) = lang::get_x_fontset($o->{lang}, $::rootwidth < 800 ? 10 : 12)) {
-	$font2 ||= $font;
-	Gtk::Rc->parse_string(qq(
-style "default-font" 
-{
-   fontset = "$font,*"
-}
-style "small-font"
-{
-   fontset = "$font2,*"
-}
-widget "*" style "default-font"
-widget "*Steps*" style "small-font"
-
-));
-    }
-
-    gtkset_background(@background1) unless $::live; #- || testing;
-
-    create_logo_window($o);
-    create_help_window($o);
-}
-
-#------------------------------------------------------------------------------
-sub create_big_help {
-    my ($o) = @_;
-    my $w = my_gtk->new('', grab => 1, force_position => [ $::stepswidth, $::logoheight ]);
-    $w->{rwindow}->set_usize($::logowidth, $::rootheight - $::logoheight);
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::VBox(0,0),
-		    1, createScrolledWindow(gtktext_insert(new Gtk::Text, $o->{current_help})),
-		    0, gtksignal_connect(my $ok = new Gtk::Button(_("Ok")), "clicked" => sub { Gtk->main_quit }),
-		   ));
-    $ok->grab_focus;
-    $w->main;
-    gtkset_mousecursor_normal();
-}
-
-#------------------------------------------------------------------------------
-sub create_help_window {
-    my ($o) = @_;
-
-    my $w;
-    if ($w = $o->{help_window}) {
-	$_->destroy foreach $w->{window}->children;
-    } else {
-	$w = bless {}, 'my_gtk';
-	$w->{rwindow} = $w->{window} = new Gtk::Window;
-	$w->{rwindow}->set_uposition($::rootwidth - $::helpwidth, $::rootheight - $::helpheight);
-	$w->{rwindow}->set_usize($::helpwidth, $::helpheight);
-	$w->{rwindow}->set_title('skip');
-	$w->sync;
-    }
-    my $pixmap = gtkpng("$ENV{SHARE_PATH}/help.png");
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::HBox(0,-2),
-		    0, gtkadd(gtksignal_connect(new Gtk::Button, clicked => sub { create_big_help($o) }), $pixmap),
-		    1, createScrolledWindow($o->{help_window_text} = new Gtk::Text),
-		   ));
-    $o->set_help($o->{step}) if $o->{step};
-    $w->show;
-    $o->{help_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub create_steps_window {
-    my ($o) = @_;
-
-    my $PIX_H = my $PIX_W = 21;
-
-    $o->{steps_window}->destroy if $o->{steps_window};
-
-    my $w = bless {}, 'my_gtk';
-    $w->{rwindow} = $w->{window} = new Gtk::Window;
-    $w->{rwindow}->set_uposition(0, 0);
-    $w->{rwindow}->set_usize($::stepswidth, $::stepsheight);
-    $w->{rwindow}->set_name('Steps');
-    $w->{rwindow}->set_events('button_press_mask');
-    $w->{rwindow}->set_title('skip');
-    #$w->show;
-
-    gtkadd($w->{window},
-	   gtkpack_(new Gtk::VBox(0,0),
-		    (map {; 1, $_ } map {
-			my $step_name = $_;
-			my $step = $o->{steps}{$_};
-			my $darea = new Gtk::DrawingArea;
-			my $in_button;
-			my $draw_pix = sub {
-			    my ($map, $mask) = gtkcreate_xpm($_[0]);
-			    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-							 $map, 0, 0,
-							 ($darea->allocation->[2]-$PIX_W)/2 + 3,
-							 ($darea->allocation->[3]-$PIX_H)/2,
-							 $PIX_W , $PIX_H );
-			};
-
-			my $f = sub { 
-			    my ($type) = @_;
-			    my $color = $step->{done} ? 'green' : $step->{entered} ? 'orange' : 'red';
-			    "$ENV{SHARE_PATH}/step-$color$type.xpm";
-			};
-			$darea->set_usize($PIX_W+3,$PIX_H);
-			$darea->set_events(['exposure_mask', 'enter_notify_mask', 'leave_notify_mask', 'button_press_mask', 'button_release_mask' ]);
-			$darea->signal_connect(expose_event => sub { $draw_pix->($f->('')) });
-			if ($step->{reachable}) {
-			    $darea->signal_connect(enter_notify_event => sub { $in_button=1; $draw_pix->($f->('-on')); });
-			    $darea->signal_connect(leave_notify_event => sub { undef $in_button; $draw_pix->($f->('')); });
-			    $darea->signal_connect(button_press_event => sub { $draw_pix->($f->('-click')); });
-			    $darea->signal_connect(button_release_event => sub { $in_button && die "setstep $step_name\n" });
-			}
-			gtkpack_(new Gtk::HBox(0,5), 0, $darea, 0, new Gtk::Label(translate($step->{text})));
-		    } grep {
-			!eval $o->{steps}{$_}{hidden};
-		    } @{$o->{orderedSteps}}),
-		    0, gtkpack(new Gtk::HBox(0,0), map {
-			my $t = $_;
-			my $w = new Gtk::Button('');
-			$w->set_name($t);
-			$w->set_usize(0, 7);
-			gtksignal_connect($w, clicked => sub {
-			    $::setstep or return; #- just as setstep s
-			    install_theme($o, $t); die "theme_changed\n" 
-			});
-		    } @themes)));
-    $w->show;
-    $o->{steps_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub create_logo_window {
-    my ($o) = @_;
-
-    gtkdestroy($o->{logo_window});
-    my $w = bless {}, 'my_gtk';
-    $w->{rwindow} = $w->{window} = new Gtk::Window;
-    $w->{rwindow}->set_uposition($::stepswidth, 0);
-    $w->{rwindow}->set_usize($::logowidth, $::logoheight);
-    $w->{rwindow}->set_name("logo");
-    $w->{rwindow}->set_title('skip');
-    $w->show;
-    my $file = $o->{meta_class} eq 'desktop' ? "logo-mandrake-Desktop.png" : "logo-mandrake.png";
-    $o->{meta_class} eq 'firewall' and $file = "logo-mandrake-Firewall.png";
-    -r $file or $file = "$ENV{SHARE_PATH}/$file";
-    -r $file and gtkadd($w->{window}, gtkpng($file));
-    $o->{logo_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub init_sizes() {
-    ($::rootheight,  $::rootwidth)    = my_gtk::gtkroot()->get_size;
-    $::live and $::rootheight -= 80;
-    #- ($::rootheight,  $::rootwidth)    = (min(768, $::rootheight), min(1024, $::rootwidth));
-    ($::stepswidth,  $::stepsheight)  = (145, $::rootheight);
-    ($::logowidth,   $::logoheight)   = ($::rootwidth - $::stepswidth, 40);
-    ($::helpwidth,   $::helpheight)   = ($::rootwidth - $::stepswidth, 104);
-    ($::windowwidth, $::windowheight) = ($::rootwidth - $::stepswidth, $::rootheight - $::helpheight - $::logoheight);
-}
-
-#------------------------------------------------------------------------------
-sub createXconf {
-    my ($file, $mouse_type, $mouse_dev, $wacom_dev) = @_;
-
-    devices::make("/dev/kbd") if arch() =~ /^sparc/; #- used by Xsun style server.
-    symlinkf(devices::make($mouse_dev), "/dev/mouse");
-
-    #- needed for imlib to start on 8-bit depth visual.
-    symlink("/tmp/stage2/etc/imrc", "/etc/imrc");
-    symlink("/tmp/stage2/etc/im_palette.pal", "etc/im_palette.pal");
-
-if (arch() =~ /^ia64/) {
-     require Xconfigurator;
-     my ($card) = Xconfigurator::cardConfigurationAuto();
-     Xconfigurator::updateCardAccordingName($card, $card->{type}) if $card && $card->{type};
-    local *F;
-    open F, ">$file" or die "can't create X configuration file $file";
-    print F <<END;
-
-Section "Files"
-   FontPath   "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "InputDevice"
-    Identifier "Keyboard1"
-    Driver      "Keyboard"
-    Option "AutoRepeat"  "250 30"
-    Option "XkbDisable"
-
-    Option "XkbRules" "xfree86"
-    Option "XkbModel" "pc105"
-    Option "XkbLayout" ""
-EndSection
-
-Section "InputDevice"
-    Identifier  "Mouse1"
-    Driver      "mouse"
-    Option "Protocol"    "$mouse_type"
-    Option "Device"      "/dev/mouse"
-EndSection
-
-Section "Monitor"
-    Identifier "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
-    VendorName "Unknown"
-    ModelName  "Unknown"
-    HorizSync  31.5-35.5
-    VertRefresh 50-70
-EndSection
-
-Section "Device"
-    Identifier "Generic VGA"
-    Driver     "vga"
-EndSection
-
-Section "Device"
-    Identifier  "device1"
-    VendorName  "Unknown"
-    BoardName   "Unknown"
-    Driver      "$card->{driver}"
-EndSection
-
-Section "Screen"
-    Identifier "screen1"
-    Device      "device1"
-    Monitor     "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
-    DefaultColorDepth 16
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "ServerLayout"
-    Identifier "layout1"
-    Screen     "screen1"
-    InputDevice "Mouse1" "CorePointer"
-    InputDevice "Keyboard1" "CoreKeyboard"
-EndSection
-
-END
-
-
-}
-else
-  {
-
-
-    my $wacom;
-    if ($wacom_dev) {
-	$wacom_dev = devices::make($wacom_dev);
-	$wacom = <<END;
-Section "Module"
-   Load "xf86Wacom.so"
-EndSection
-
-Section "XInput"
-    SubSection "WacomStylus"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-    SubSection "WacomCursor"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-    SubSection "WacomEraser"
-        Port "$wacom_dev"
-        AlwaysCore
-    EndSubSection
-EndSection
-END
-    }
-
-    local *F;
-    open F, ">$file" or die "can't create X configuration file $file";
-    print F <<END;
-Section "Files"
-   FontPath   "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "Keyboard"
-   Protocol    "Standard"
-   AutoRepeat  0 0
-
-   LeftAlt         Meta
-   RightAlt        Meta
-   ScrollLock      Compose
-   RightCtl        Control
-END
-
-    if (arch() =~ /^sparc/) {
-	print F <<END;
-   XkbRules    "sun"
-   XkbModel    "sun"
-   XkbLayout   "us"
-   XkbCompat   "compat/complete"
-   XkbTypes    "types/complete"
-   XkbKeycodes "sun(type5)"
-   XkbGeometry "sun(type5)"
-   XkbSymbols  "sun/us(sun5)"
-END
-    } else {
-	print F "    XkbDisable\n";
-    }
-
-    print F <<END;
-EndSection
-
-Section "Pointer"
-   Protocol    "$mouse_type"
-   Device      "/dev/mouse"
-   ZAxisMapping 4 5
-EndSection
-
-$wacom
-
-Section "Monitor"
-   Identifier  "My Monitor"
-   VendorName  "Unknown"
-   ModelName   "Unknown"
-   HorizSync   31.5-35.5
-   VertRefresh 50-70
-   Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
-   Modeline "640x480"     28.3   640  664  760  800   480  491  493  525
-   ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
-EndSection
-
-
-Section "Device"
-   Identifier "Generic VGA"
-   VendorName "Unknown"
-   BoardName "Unknown"
-   Chipset "generic"
-EndSection
-
-Section "Device"
-   Identifier "svga"
-   VendorName "Unknown"
-   BoardName "Unknown"
-EndSection
-
-Section "Screen"
-    Driver      "vga16"
-    Device      "Generic VGA"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Modes       "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver      "fbdev"
-    Device      "Generic VGA"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "default"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver "svga"
-    Device      "svga"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-
-Section "Screen"
-    Driver      "accel"
-    Device      "svga"
-    Monitor     "My Monitor"
-    Subsection "Display"
-        Depth       16
-        Modes       "800x600" "640x480"
-        ViewPort    0 0
-    EndSubsection
-EndSection
-END
-}
-}
-#-   ModeLine "640x480"     28     640  672  768  800   480  490  492  525
-
-1;
diff --git a/perl-install/install_interactive.pm b/perl-install/install_interactive.pm
deleted file mode 100644
index b9ee10de7..000000000
--- a/perl-install/install_interactive.pm
+++ /dev/null
@@ -1,272 +0,0 @@
-package install_interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars;
-
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use install_steps;
-use devices;
-use fsedit;
-use log;
-use fs;
-
-
-sub tellAboutProprietaryModules {
-    my ($o) = @_;
-    my @l = grep {$_} map { $_->{driver} =~ /^Bad:(.*)/ && $1 } detect_devices::probeall();
-    $o->ask_warn('', 
-_("Some hardware on your computer needs ``proprietary'' drivers to work.
-You can find some information about them at: %s", join(", ", @l))) if @l;
-}
-
-#- unit of $mb is mega bytes, min and max are in sectors, this
-#- function is used to convert back to sectors count the size of
-#- a partition ($mb) given from the interface (on Resize or Create).
-#- modified to take into account a true bounding with min and max.
-sub from_Mb {
-    my ($mb, $min, $max) = @_;
-    $mb <= $min >> 11 and return $min;
-    $mb >= $max >> 11 and return $max;
-    $mb * 2048;
-}
-
-sub partition_with_diskdrake {
-    my ($o, $all_hds, $nowizard) = @_;
-    my $ok; 
-
-    $o->set_help('partition_with_diskdrake');
-    do {
-	$ok = 1;
-	require diskdrake::interactive;
-	{
-	    local $::expert = $::expert;
-	    diskdrake::interactive::main($o, $all_hds, $nowizard);
-	}
-	if (delete $o->{wizard}) {
-	    partitionWizard($o, 'nodiskdrake') or redo;
-	    return 1;
-	}
-	my @fstab = fsedit::get_all_fstab($all_hds);
-	
-	unless (fsedit::get_root_(\@fstab)) {
-	    $ok = 0;
-	    $o->ask_okcancel('', _("You must have a root partition.
-For this, create a partition (or click on an existing one).
-Then choose action ``Mount point'' and set it to `/'"), 1) or return;
-	}
-	if (!grep { isSwap($_) } @fstab) {
-	    $o->ask_warn('', _("You must have a swap partition")), $ok=0 if !$::expert;
-	    $ok &&= $::expert || $o->ask_okcancel('', _("You don't have a swap partition.\n\nContinue anyway?"));
-	}
-	if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $all_hds)) {
-	    $o->ask_warn('', _("You must have a FAT partition mounted in /boot/efi"));
-	    $ok = '';
-	}
-    } until $ok;
-    1;
-}
-
-sub partitionWizardSolutions {
-    my ($o, $all_hds, $fstab, $readonly) = @_;
-    my $hds = $all_hds->{hds};
-    my @wizlog;
-    my (@solutions, %solutions);
-
-    my $min_linux = 400 << 11;
-    my $max_linux = 3000 << 11;
-    my $min_swap = 50 << 11;
-    my $max_swap = 300 << 11;
-    my $min_freewin = 100 << 11;
-
-    # each solution is a [ score, text, function ], where the function retunrs true if succeeded
-
-    my @good_hds = grep { $_->can_raw_add } @$hds;
-    if (fsedit::free_space(@good_hds) > $min_linux and !$readonly) {
-	$solutions{free_space} = [ 20, _("Use free space"), sub { fsedit::auto_allocate($all_hds); 1 } ]
-    } else { 
-	push @wizlog, _("Not enough free space to allocate new partitions") . ": " .
-	  (@good_hds ? 
-	   fsedit::free_space(@good_hds) . " < $min_linux" :
-	   "no harddrive on which partitions can be added") if !$readonly;
-    }
-
-    if (my @truefs = grep { isTrueFS($_) } @$fstab) {
-	#- value twice the ext2 partitions
-	$solutions{existing_part} = [ 6 + @truefs + @$fstab, _("Use existing partitions"), sub { $o->ask_mntpoint_s($fstab) } ]
-    } else {
-	push @wizlog, _("There is no existing partition to use");
-    }
-
-    my @fats = grep { isFat($_) } @$fstab;
-    fs::df($_) foreach @fats;
-    if (my @ok_forloopback = sort { $b->{free} <=> $a->{free} } grep { $_->{free} > $min_linux + $min_swap + $min_freewin } @fats) {
-	$solutions{loopback} = 
-	  [ -10 - @fats, _("Use the Windows partition for loopback"), 
-	    sub { 
-		my ($s_root, $s_swap);
-		my $part = $o->ask_from_listf('', _("Which partition do you want to use for Linux4Win?"), \&partition_table::description, \@ok_forloopback) or return;
-		$max_swap = $min_swap + 1 if $part->{free} - $max_swap < $min_linux;
-		$o->ask_from('', _("Choose the sizes"), [ 
-		   { label => _("Root partition size in MB: "), val => \$s_root, min => $min_linux >> 11, max => min($part->{free} - $max_swap, $max_linux) >> 11, type => 'range' },
-		   { label => _("Swap partition size in MB: "), val => \$s_swap, min => $min_swap >> 11,  max => $max_swap >> 11, type => 'range' },
-		]) or return;
-		push @{$part->{loopback}}, 
-		  { type =>0x483, loopback_file => '/lnx4win/linuxsys.img', mntpoint => '/',    size => $s_root << 11, loopback_device => $part, notFormatted => 1 },
-		  { type => 0x82, loopback_file => '/lnx4win/swapfile',     mntpoint => 'swap', size => $s_swap << 11, loopback_device => $part, notFormatted => 1 };
-		fsedit::recompute_loopbacks($all_hds);
-		1;
-	    } ];
-	$solutions{resize_fat} = 
-	  [ 6 - @fats, _("Use the free space on the Windows partition"),
-	    sub {
-		$o->set_help('resizeFATChoose');
-		my $part = $o->ask_from_listf('', _("Which partition do you want to resize?"), \&partition_table::description, \@ok_forloopback) or return;
-		$o->set_help('resizeFATWait');
-		my $w = $o->wait_message(_("Resizing"), _("Resizing Windows partition"));
-		require resize_fat::main;
-		my $resize_fat = eval { resize_fat::main->new($part->{device}, devices::make($part->{device})) };
-		$@ and die _("The FAT resizer is unable to handle your partition, 
-the following error occured: %s", $@);
-		my $min_win = $resize_fat->min_size;
-		$part->{size} > $min_linux + $min_swap + $min_freewin + $min_win or die _("Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.");
-		$o->ask_okcancel('', _("WARNING!
-
-DrakX will now resize your Windows partition. Be careful:
-this operation is dangerous. If you have not already done
-so, you should first exit the installation, run scandisk
-under Windows (and optionally run defrag), then restart the
-installation. You should also backup your data.
-When sure, press Ok.")) or return;
-
-		my $mb_size = $part->{size} >> 11;
-		$o->ask_from('', _("Which size do you want to keep for Windows on"), [
-                   { label => _("partition %s", partition_table::description($part)), val => \$mb_size, min => $min_win >> 11, max => ($part->{size} - $min_linux - $min_swap) >> 11, type => 'range' },
-                ]) or return;
-
-		my $size = from_Mb($mb_size, $min_win, $part->{size});
-
-		local *log::l = sub { $w->set(join(' ', @_)) };
-		eval { $resize_fat->resize($size) };
-		$@ and die _("FAT resizing failed: %s", $@);
-
-		$part->{size} = $size;
-		$part->{isFormatted} = 1;
-		
-		my ($hd) = fsedit::part2hd($part, $all_hds);
-		$hd->{isDirty} = $hd->{needKernelReread} = 1;
-		$hd->adjustEnd($part);
-		partition_table::adjust_local_extended($hd, $part);
-		partition_table::adjust_main_extended($hd);
-
-		fsedit::auto_allocate($all_hds);
-		1;
-	    } ] if !$readonly;
-    } else {
-	push @wizlog, _("There is no FAT partition to resize or to use as loopback (or not enough space left)") .
-	  @fats ? "\nFAT partitions:" . join('', map { "\n  $_->{device} $_->{free} (" . ($min_linux + $min_swap + $min_freewin) . ")" } @fats) : '';
-    }
-
-    if (@$fstab && !$readonly) {
-	$solutions{wipe_drive} =
-	  [ 10, fsedit::is_one_big_fat($hds) ? _("Remove Windows(TM)") : _("Erase entire disk"), 
-	    sub {
-		$o->set_help('takeOverHdChoose');
-		my $hd = $o->ask_from_listf('', _("You have more than one hard drive, which one do you install linux on?"),
-					    \&partition_table::description, $hds) or return;
-		$o->set_help('takeOverHdConfirm');
-		$o->ask_okcancel('', _("ALL existing partitions and their data will be lost on drive %s", partition_table::description($hd))) or return;
-		partition_table_raw::zero_MBR($hd);
-		fsedit::auto_allocate($all_hds);
-		1;
-	    } ];
-    }
-
-    if (!$readonly) {
-	$solutions{diskdrake} = [ 0, _("Custom disk partitioning"), sub { partition_with_diskdrake($o, $all_hds, 'nowizard') } ];
-    }
-
-    $solutions{fdisk} =
-      [ -10, _("Use fdisk"), sub { 
-	    $o->enter_console;
-	    foreach (@$hds) {
-		print "\n" x 10, _("You can now partition %s.
-When you are done, don't forget to save using `w'", partition_table::description($_));
-		print "\n\n";
-		my $pid = 0;
-		if (arch() =~ /ppc/) {
-			$pid = fork or exec "pdisk", devices::make($_->{device});
-		} else {
-			$pid = fork or exec "fdisk", devices::make($_->{device});
-		}			
-		waitpid($pid, 0);
-	    }
-	    $o->leave_console;
-	    0;
-	} ] if $o->{partitioning}{fdisk};
-
-    log::l("partitioning wizard log:\n", (map { ">>wizlog>>$_\n" } @wizlog));
-    %solutions;
-}
-
-sub partitionWizard {
-    my ($o, $nodiskdrake) = @_;
-
-    $o->set_help('doPartitionDisks');
-
-    my %solutions = partitionWizardSolutions($o, $o->{all_hds}, $o->{fstab}, $o->{partitioning}{readonly});
-    if ($o->{lnx4win}) {
-	if ($solutions{loopback}) {
-	    %solutions = (loopback => $solutions{loopback});
-	} else {
-	    $o->ask_warn('', _("You don't have enough free space on your Windows partition")) if grep { isFat($_) } @{$o->{fstab}}
-	}
-    }
-
-    delete $solutions{diskdrake} if $nodiskdrake;
-
-    my @solutions = sort { $b->[0] <=> $a->[0] } values %solutions;
-
-    my $level = $::expert ? -9999 : 0;
-    my @sol = grep { $_->[0] >= $level } @solutions;
-
-    log::l(      "solutions found: " . join('', map {$_->[1]} @sol) . 
-	   " (all solutions found: " . join('', map {$_->[1]} @solutions) . ")");
-
-    @solutions = @sol if @sol > 1;
-    log::l("solutions: ", int @solutions);
-    @solutions or $o->ask_warn('', _("I can't find any room for installing")), die 'already displayed';
-
-    my $ok; while (!$ok) {
-	log::l('HERE: ', join(',', map { $_->[1] } @solutions));
-	if (my $sol = $o->ask_from_listf('', _("The DrakX Partitioning wizard found the following solutions:"), sub { $_[0][1] }, \@solutions)) {
-	    log::l("partitionWizard calling solution $sol->[1]");
-	    eval { $ok = $sol->[2]->() };
-	    die if $@ =~ /setstep/;
-	    $ok &&= !$@;
-	    $@ and $o->ask_warn('', _("Partitioning failed: %s", $@));
-	} else {
-	    $nodiskdrake ? return : die "setstep setupSCSI\n";
-	}
-    }
-    1;
-}
-
-sub upNetwork {
-    my ($o, $pppAvoided) = @_;
-    my $w = $o->wait_message('', _("Bringing up the network"));
-    install_steps::upNetwork($o, $pppAvoided);
-}
-sub downNetwork {
-    my ($o, $pppOnly) = @_;
-    my $w = $o->wait_message('', _("Bringing down the network"));
-    install_steps::downNetwork($o, $pppOnly);
-}
-
-
-
-1;
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
deleted file mode 100644
index fb5ca0659..000000000
--- a/perl-install/install_steps.pm
+++ /dev/null
@@ -1,1068 +0,0 @@
-package install_steps; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@filesToSaveForUpgrade @filesNewerToUseAfterUpgrade @ISA);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_any qw(:all);
-use partition_table qw(:types);
-use detect_devices;
-use modules;
-use run_program;
-use lang;
-use keyboard;
-use fsedit;
-use loopback;
-use pkgs;
-use any;
-use log;
-use fs;
-
-@filesToSaveForUpgrade = qw(
-/etc/ld.so.conf /etc/fstab /etc/hosts /etc/conf.modules /etc/modules.conf
-);
-
-@filesNewerToUseAfterUpgrade = qw(
-/etc/profile
-);
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($$) {
-    my ($type, $o) = @_;
-
-    bless $o, ref $type || $type;
-    return $o;
-}
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub enteringStep {
-    my ($o, $step) = @_;
-    log::l("starting step `$step'");
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    log::l("step `$step' finished");
-
-    if (-d "$o->{prefix}/root/drakx") {
-	eval { cp_af("/tmp/ddebug.log", "$o->{prefix}/root/drakx") };
-	output(install_any::auto_inst_file(), install_any::g_auto_install(1));
-    }
-
-    for (my $s = $o->{steps}{first}; $s; $s = $o->{steps}{$s}{next}) {
-	#- the reachability property must be recomputed each time to take
-	#- into account failed step.
-	next if $o->{steps}{$s}{done} && !$o->{steps}{$s}{redoable};
-
-	my $reachable = 1;
-	if (my $needs = $o->{steps}{$s}{needs}) {
-	    my @l = ref $needs ? @$needs : $needs;
-	    $reachable = min(map { $o->{steps}{$_}{done} || 0 } @l);
-	}
-	$o->{steps}{$s}{reachable} = 1 if $reachable;
-    }
-    $o->{steps}{$step}{reachable} = $o->{steps}{$step}{redoable};
-
-    while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) {
-	eval { &$f() };
-	$o->ask_warn(_("Error"), [
-_("An error occurred, but I don't know how to handle it nicely.
-Continue at your own risk."), $@ ]) if $@;
-    }
-}
-
-sub errorInStep($$) { print "error :(\n"; c::_exit(1) }
-sub kill_action {}
-sub set_help { 1 }
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($o) = @_;
-    lang::set($o->{lang}, !$o->isa('interactive_gtk'));
-    $o->{langs} ||= { $o->{lang} => 1 };
-
-    log::l("selectLanguage: pack_langs ", lang::pack_langs($o->{langs}));
-
-    if ($o->{keyboard_unsafe} || !$o->{keyboard}) {
-	$o->{keyboard_unsafe} = 1;
-	$o->{keyboard} = keyboard::lang2keyboard($o->{lang});
-	keyboard::setup($o->{keyboard}) if !$::live;
-    }
-
-    addToBeDone {
-	lang::write_langs($o->{prefix}, $o->{langs});
-    } 'formatPartitions' unless $::g_auto_install;
-    addToBeDone {
-	lang::write($o->{prefix}, $o->{lang});
-    } 'installPackages' unless $::g_auto_install;
-}
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($o) = @_;
-    keyboard::setup($o->{keyboard});
-
-    addToBeDone {
-	keyboard::write($o->{prefix}, $o->{keyboard}, lang::lang2charset($o->{lang}));
-    } 'installPackages' unless $::g_auto_install;
-}
-#------------------------------------------------------------------------------
-sub acceptLicence {}
-sub selectPath {}
-#------------------------------------------------------------------------------
-sub selectInstallClass {}
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($o) = @_;
-    modules::configure_pcmcia($o->{pcmcia}) if $o->{pcmcia};
-    modules::load_ide();
-    modules::load_category('disk/scsi|hardware_raid');
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksBefore {
-    my ($o) = @_;
-    eval { 
-	close *pkgs::LOG;
-	eval { fs::umount("$o->{prefix}/proc") };
-	eval {          fs::umount_all($o->{fstab}, $o->{prefix}) };
-	eval { sleep 1; fs::umount_all($o->{fstab}, $o->{prefix}) } if $@; #- HACK
-    } if $o->{fstab} && !$::testing && !$::live;
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksAfter {
-    my ($o) = @_;
-
-    if (!$::testing) {
-	my $hds = $o->{all_hds}{hds};
-	partition_table::write($_) foreach @$hds;
-	$_->{rebootNeeded} and $o->rebootNeeded foreach @$hds;
-    }
-
-    fs::set_removable_mntpoints($o->{all_hds});
-    fs::set_all_default_options($o->{all_hds}, $o->{useSupermount}, $o->{security}, lang::fs_options($o->{lang}))
-	if !$o->{isUpgrade};
-
-    $o->{fstab} = [ fsedit::get_all_fstab($o->{all_hds}) ];
-    fsedit::get_root_($o->{fstab}) or die "Oops, no root partition";
-
-    if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) {
-	die "Need bootstrap partition to boot system!" if !(defined $partition_table_mac::bootstrap_part);
-    }
-    
-    if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $o->{all_hds})) {
-	die _("You must have a FAT partition mounted in /boot/efi");
-    }
-
-    if ($o->{partitioning}{use_existing_root}) {
-	#- ensure those partitions are mounted so that they are not proposed in choosePartitionsToFormat
-	fs::mount_part($_, $o->{prefix}) foreach (sort { $a->{mntpoint} cmp $b->{mntpoint} }
-						  grep { $_->{mntpoint} && maybeFormatted($_) } @{$o->{fstab}});
-    }
-
-    cat_("/proc/mounts") =~ m|(\S+)\s+/tmp/image nfs| &&
-      !grep { $_->{mntpoint} eq "/mnt/nfs" } @{$o->{all_hds}{nfss}} and
-	push @{$o->{all_hds}{nfss}}, { type => 'nfs', mntpoint => "/mnt/nfs", device => $1, options => "noauto,ro,nosuid,soft,rsize=8192,wsize=8192" };
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($o) = @_;
-
-    install_any::getHds($o);
-
-    if ($o->{partitioning}{use_existing_root} || $o->{isUpgrade}) {
-	# either one root is defined (and all is ok), or we take the first one we find
-	my $p = fsedit::get_root_($o->{fstab}) || first(install_any::find_root_parts($o->{fstab}, $o->{prefix})) or die;
-	install_any::use_root_part($o->{all_hds}, $p, $o->{prefix});
-    } 
-    if ($o->{partitioning}{auto_allocate}) {
-	fsedit::auto_allocate($o->{all_hds}, $o->{partitions});
-    }
-}
-
-#------------------------------------------------------------------------------
-
-sub ask_mntpoint_s {
-    my ($o, $fstab) = @_;
-
-    #- TODO: set the mntpoints
-
-    my %m; foreach (@$fstab) {
-	my $m = $_->{mntpoint};
-
-	next unless $m && $m ne 'swap'; #- there may be a lot of swap.
-
-	$m{$m} and die _("Duplicate mount point %s", $m);
-	$m{$m} = 1;
-
-	#- in case the type does not correspond, force it to ext2
-	$_->{type} = 0x83 if $m =~ m|^/| && !isFat($_) && !isTrueFS($_);
-    }
-    1;
-}
-
-
-sub rebootNeeded($) {
-    my ($o) = @_;
-    log::l("Rebooting...");
-    c::_exit(0);
-}
-
-sub choosePartitionsToFormat($$) {
-    my ($o, $fstab) = @_;
-
-    foreach (@$fstab) {
-	$_->{mntpoint} = "swap" if isSwap($_);
-	$_->{mntpoint} or next;
-	
-	add2hash_($_, { toFormat => $_->{notFormatted} });
-        $_->{toFormatUnsure} = member($_->{mntpoint}, '/', '/usr');
-
-	if (!$_->{toFormat}) {
-	    my $t = fsedit::typeOfPart($_->{device});
-	    $_->{toFormatUnsure} ||=
-	      #- if detected dos/win, it's not precise enough to just compare the types (too many of them)
-	      (!$t || isOtherAvailableFS({ type => $t }) ? !isOtherAvailableFS($_) : $t != $_->{type});
-	}
-    }
-}
-
-sub formatMountPartitions {
-    my ($o) = @_;
-    fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix});
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
-    my ($o) = @_;
-    install_any::setPackages($o);
-    pkgs::selectPackagesAlreadyInstalled($o->{packages}, $o->{prefix})
-	if !$o->{isUpgrade} && (-r "$o->{prefix}/var/lib/rpm/packages.rpm" || -r "$o->{prefix}/var/lib/rpm/Packages");
-}
-sub selectPackagesToUpgrade {
-    my ($o) = @_;
-    pkgs::selectPackagesToUpgrade($o->{packages}, $o->{prefix}, $o->{base}, $o->{toRemove}, $o->{toSave});
-}
-
-sub choosePackages {
-    my ($o, $packages, $compssUsers, $first_time) = @_;
-
-    #- now for upgrade, package that must be upgraded are
-    #- selected first, after is used the same scheme as install.
-
-    #- make sure we kept some space left for available else the system may
-    #- not be able to start (xfs at least).
-    my $available = install_any::getAvailableSpace($o);
-    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-    log::l(sprintf "available size %s (corrected %s)", formatXiB($available), formatXiB($availableCorrected));
-
-    add2hash_($o, { compssListLevel => 5 }) if !$::auto_install;
-
-    #- avoid destroying user selection of packages but only
-    #- for expert, as they may have done individual selection before.
-    if ($first_time || !$::expert) {
-	install_any::unselectMostPackages($o);
-
-	exists $o->{compssListLevel}
-	  and pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $o->{compssListLevel}, $availableCorrected);
-    }
-    $availableCorrected;
-}
-
-sub beforeInstallPackages {
-    my ($o) = @_;
-
-    #- save these files in case of upgrade failure.
-    if ($o->{isUpgrade}) {
-	foreach (@filesToSaveForUpgrade) {
-	    unlink "$o->{prefix}/$_.mdkgisave";
-	    if (-e "$o->{prefix}/$_") {
-		eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
-	    }
-	}
-	foreach (@filesNewerToUseAfterUpgrade) {
-	    unlink "$o->{prefix}/$_.rpmnew";
-	}
-    }
-
-    #- some packages need such files for proper installation.
-    install_any::write_fstab($o);
-
-    require network;
-    network::add2hosts("$o->{prefix}/etc/hosts", "localhost.localdomain", "127.0.0.1");
-
-    log::l("setting excludedocs to $o->{excludedocs}");
-    substInFile { s/%_excludedocs.*//; $_ .= "%_excludedocs yes\n" if eof && $o->{excludedocs} } "$o->{prefix}/etc/rpm/macros";
-}
-
-sub pkg_install {
-    my ($o, @l) = @_;
-    log::l("selecting packages");
-    require pkgs;
-    if ($::testing) {
-	log::l("selecting package \"$_\"") foreach @l;
-    } else {
-	pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found") foreach @l;
-    }
-    my @toInstall = pkgs::packagesToInstall($o->{packages});
-    if (@toInstall) {
-	log::l("installing packages");
-	$o->installPackages;
-    } else {
-	log::l("all packages selected are already installed, nothing to do")
-    }
-}
-
-sub pkg_install_if_requires_satisfied {
-    my ($o, @l) = @_;
-    require pkgs;
-    foreach (@l) {
-	my %newSelection;
-	my $pkg = pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found";
-	pkgs::selectPackage($o->{packages}, $pkg, 0, \%newSelection);
-	if (scalar(keys %newSelection) == 1) {
-	    pkgs::selectPackage($o->{packages}, $pkg);
-	} else {
-	    log::l("pkg_install_if_requires_satisfied: not selecting $_ because of ", join(", ", keys %newSelection));
-	}
-    }
-    $o->installPackages;
-}
-
-sub installPackages($$) { #- complete REWORK, TODO and TOCHECK!
-    my ($o) = @_;
-    my $packages = $o->{packages};
-
-    if (@{$o->{toRemove} || []}) {
-	#- hack to ensure proper upgrade of packages from other distribution,
-	#- as release number are not mandrake based. this causes save of
-	#- important files and restore them after.
-	foreach (@{$o->{toSave} || []}) {
-	    if (-e "$o->{prefix}/$_") {
-		eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
-	    }
-	}
-	pkgs::remove($o->{prefix}, $o->{toRemove});
-	foreach (@{$o->{toSave} || []}) {
-	    if (-e "$o->{prefix}/$_.mdkgisave") {
-		renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_");
-	    }
-	}
-	$o->{toSave} = [];
-
-	#- hack for compat-glibc to upgrade properly :-(
-	if (pkgs::packageFlagSelected(pkgs::packageByName($packages, 'compat-glibc')) &&
-	    !pkgs::packageFlagInstalled(pkgs::packageByName($packages, 'compat-glibc'))) {
-	    rename "$o->{prefix}/usr/i386-glibc20-linux", "$o->{prefix}/usr/i386-glibc20-linux.mdkgisave";
-	}
-    }
-
-    #- small transaction will be built based on this selection and depslist.
-    my @toInstall = pkgs::packagesToInstall($packages);
-
-    my $time = time;
-    $ENV{DURING_INSTALL} = 1;
-    pkgs::install($o->{prefix}, $o->{isUpgrade}, \@toInstall, $packages->{depslist}, $packages->{mediums});
-    delete $ENV{DURING_INSTALL};
-    run_program::rooted_or_die($o->{prefix}, 'ldconfig') unless $::g_auto_install;
-    log::l("Install took: ", formatTimeRaw(time - $time));
-    install_any::log_sizes($o);
-    scalar(@toInstall); #- return number of packages installed.
-}
-
-sub afterInstallPackages($) {
-    my ($o) = @_;
-
-    return if $::g_auto_install;
-
-    die _("Some important packages didn't get installed properly.
-Either your cdrom drive or your cdrom is defective.
-Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"
-") if grep { m|read failed: Input/output error| } cat_("$o->{prefix}/root/drakx/install.log");
-
-    if (arch() !~ /^sparc/) { #- TODO restore it as may be needed for sparc
-	-x "$o->{prefix}/usr/bin/dumpkeys" or $::testing or die 
-"Some important packages didn't get installed properly.
-
-Please switch to console 2 (using ctrl-alt-f2)
-and look at the log file /tmp/ddebug.log
-
-Consoles 1,3,4,7 may also contain interesting information";
-    }
-
-    #-  why not? cuz weather is nice today :-) [pixel]
-    common::sync(); common::sync();
-
-    if (do {
-	my $p = pkgs::packageByName($o->{packages}, 'devfsd');
-	$p && pkgs::packageFlagInstalled($p)
-    }) {
-        require bootloader;
-	bootloader::may_append($o->{bootloader}, devfs => 'mount');
-    }
-
-    #- generate /etc/lvmtab needed for rc.sysinit
-    run_program::rooted($o->{prefix}, 'vgscan') if -e '/etc/lvmtab';
-
-    #- configure PCMCIA services if needed.
-    modules::write_pcmcia($o->{prefix}, $o->{pcmcia});
-
-    #- for mandrake_firstime
-    touch "$o->{prefix}/var/lock/TMP_1ST";
-
-    any::config_dvd($o->{prefix});
-    any::config_mtools($o->{prefix});
-
-    any::writeandclean_ldsoconf($o->{prefix});
-
-    #- make sure wins is disabled in /etc/nsswitch.conf
-    #- else if eth0 is not existing, glibc segfaults.
-    substInFile { s/\s*wins// if /^\s*hosts\s*:/ } "$o->{prefix}/etc/nsswitch.conf";
-
-    #- make sure some services have been enabled (or a catastrophic restart will occur).
-    #- these are normally base package post install scripts or important services to start.
-    run_program::rooted($o->{prefix}, "chkconfig", "--add", $_) foreach
-			qw(random netfs network rawdevices sound kheader usb keytable syslog crond portmap);
-
-    if ($o->{mouse}{device} =~ /ttyS/) {
-	log::l("disabling gpm for serial mice (doesn't get along nicely with X)");
-	run_program::rooted($o->{prefix}, "chkconfig", "--del", "gpm") 
-    }
-
-    #- call update-menus at the end of package installation
-    run_program::rooted($o->{prefix}, "update-menus");
-
-    if ($o->{pcmcia}) {
-	substInFile { s/.*(TaskBarShowAPMStatus).*/$1=1/ } "$o->{prefix}/usr/lib/X11/icewm/preferences";
-	eval { cp_af("$o->{prefix}/usr/share/applnk/System/kapm.kdelnk",
-		     "$o->{prefix}/etc/skel/Desktop/Autostart/kapm.kdelnk") };
-    }
-
-    $o->install_urpmi;
-
-    if ($o->{lang} =~ /^(zh_TW|th|vi|be|bg)/) {
-	#- skip since we don't have the right font (it badly fails at least for zh_TW)
-    } elsif (my $LANG = lang::lang2LANG($o->{lang})) {
-	my $kdmrc = "$o->{prefix}/usr/share/config/kdm/kdmrc";
-
-	my $kde_charset = lang::charset2kde_charset(lang::lang2charset($o->{lang}));
-	my $welcome = c::to_utf8(_("Welcome to %s", '%n'));
-	substInFile { 
-	    s/^(GreetString)=.*/$1=$welcome/;
-	    s/^(Language)=.*/$1=$LANG/;
-	    if (!member($kde_charset, 'iso8859-1', 'iso8859-15')) { 
-		#- don't keep the default for those
-		s/^(StdFont)=.*/$1=*,12,5,$kde_charset,50,0/;
-		s/^(FailFont)=.*/$1=*,12,5,$kde_charset,75,0/;
-		s/^(GreetFont)=.*/$1=*,24,5,$kde_charset,50,0/;
-	    }
-	} "$o->{prefix}/usr/share/config/kdm/kdmrc";
-
-    }
-    install_any::disable_user_view($o->{prefix}) if $o->{security} >= 3 || $o->{authentication}{NIS};
-    run_program::rooted($o->{prefix}, "kdeDesktopCleanup");
-
-    foreach (list_skels($o->{prefix}, '.kde/share/config/kfmrc')) {
-	my $found;
-	substInFile {
-	    $found ||= /KFM Misc Defaults/;
-	    $_ .= 
-"[KFM Misc Defaults]
-GridWidth=85
-GridHeight=70
-" if eof && !$found;
-	} $_ 
-    }
-
-    #- move some file after an upgrade that may be seriously annoying.
-    #- and rename saved files to .mdkgiorig.
-    if ($o->{isUpgrade}) {
-	my $pkg = pkgs::packageByName($o->{packages}, 'rpm');
-	$pkg && pkgs::packageSelectedOrInstalled($pkg) && pkgs::versionCompare(pkgs::packageVersion($pkg), '4.0') >= 0 and
-	  pkgs::clean_old_rpm_db($o->{prefix});
-
-	log::l("moving previous desktop files that have been updated to Trash of each user");
-	install_any::kdemove_desktop_file($o->{prefix});
-
-	foreach (@filesToSaveForUpgrade) {
-	    renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_.mdkgiorig")
-	      if -e "$o->{prefix}$_.mdkgisave";
-	}
-
-	foreach (@filesNewerToUseAfterUpgrade) {
-	    if (-e "$o->{prefix}/$_.rpmnew" && -e "$o->{prefix}/$_") {
-		renamef("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgiorig");
-		renamef("$o->{prefix}/$_.rpmnew", "$o->{prefix}/$_");
-	    }
-	}
-    }
-
-    if ($o->{blank} || $o->{updatemodules}) {
-	my @l = detect_devices::floppies_dev();
-
-	foreach (qw(blank updatemodules)) {
-	    $o->{$_} eq "1" and $o->{$_} = $l[0] || die _("No floppy drive available");
-	}
-
-	$o->{blank} and $o->copyKernelFromFloppy();
-	$o->{updatemodules} and $o->updateModulesFromFloppy();
-    }
-}
-
-sub copyKernelFromFloppy {
-    my ($o) = @_;
-    return if $::testing || !$o->{blank};
-
-    fs::mount($o->{blank}, "/floppy", "vfat", 0);
-    eval { cp_af("/floppy/vmlinuz", "$o->{prefix}/boot/vmlinuz-default") };
-    if ($@) {
-	log::l("copying of /floppy/vmlinuz from blank modified disk failed: $@");
-    }
-    fs::umount("/floppy");
-}
-
-sub install_urpmi {
-    my ($o) = @_;
-
-    my $pkg = pkgs::packageByName($o->{packages}, 'urpmi');
-    if ($pkg && pkgs::packageSelectedOrInstalled($pkg)) {
-	install_any::install_urpmi($o->{prefix}, 
-				   $::oem ? 'cdrom' : $o->{method}, #- HACK
-				   $o->{packages}{mediums});
-	pkgs::saveCompssUsers($o->{prefix}, $o->{packages}, $o->{compssUsers}, $o->{compssUsersSorted});
-    }
-
-
-}
-
-sub updateModulesFromFloppy {
-    my ($o) = @_;
-    return if $::testing || !$o->{updatemodules};
-
-    fs::mount($o->{updatemodules}, "/floppy", "ext2", 0);
-    foreach (glob_("$o->{prefix}/lib/modules/*")) {
-	my ($kernelVersion) = m,lib/modules/(\S*),;
-	log::l("examining updated modules for kernel $kernelVersion");
-	if (-d "/floppy/$kernelVersion") {
-	    my @src_files = glob_("/floppy/$kernelVersion/*");
-	    my @dest_files = split "\n", `chroot $o->{prefix} find /lib/modules`;
-	    foreach my $s (@src_files) {
-		log::l("found updatable module $s");
-		my ($sfile, $sext) = $s =~ /([^\/\.]*\.o)(?:\.gz|\.bz2)?$/;
-		my $qsfile = quotemeta $sfile;
-		my $qsext = quotemeta $sext;
-		foreach my $target (@dest_files) {
-		    $target =~ /$qsfile/ or next;
-		    eval { cp_af($s, $target) };
-		    if ($@) {
-			log::l("updating module $target by $s failed: $@");
-		    } else {
-			log::l("updating module $target by $s");
-		    }
-		    if ($target !~ /$qsfile$qsext$/) {
-			#- extension differ, first rename target file correctly,
-			#- then uncompress source file, then compress it as expected.
-			my ($basetarget, $text) = $target =~ /(.*?)(\.gz|\.bz2)$/;
-			rename $target, "$basetarget$sext";
-			$sext eq '.gz' and run_program::run("gzip", "-d", "$basetarget$sext");
-			$sext eq '.bz2' and run_program::run("bzip2", "-d", "$basetarget$sext");
-			$text eq '.gz' and run_program::run("gzip", $basetarget);
-			$text eq '.bz2' and run_program::run("bzip2", $basetarget);
-		    }
-		}
-	    }
-	}
-    }
-    fs::umount("/floppy");
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse($) {
-    my ($o) = @_;
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($o) = @_;
-    require network;
-    network::configureNetwork2($o, $o->{prefix}, $o->{netc}, $o->{intf});
-    if ($o->{method} =~ /ftp|http|nfs/) {
-	$o->{netcnx}{type} = 'lan';
-	foreach ("up", "down") {
-	    my $f = "$o->{prefix}/etc/sysconfig/network-scripts/net_cnx_$_";
-	    output $f, "\nif$_ eth0\n";
-	    chmod 0755, $f;
-	}
-	output "$o->{prefix}/etc/sysconfig/network-scripts/net_cnx_pg", "\n/usr/sbin/draknet\n";
-    }
-}
-
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my ($o) = @_;
-    my $u = $o->{crypto} or return; $u->{mirror} && $u->{packages} or return;
-
-    upNetwork($o);
-    require crypto;
-    my @crypto_packages = crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
-    $o->pkg_install(@{$u->{packages}});
-}
-
-sub installUpdates {
-    my ($o) = @_;
-    my $u = $o->{updates} or return; $u->{updates} or return;
-
-    upNetwork($o);
-    require crypto;
-    crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror}) and
-	$o->pkg_install(@{$u->{packages} || []});
-
-    #- re-install urpmi with update security medium.
-    $o->install_urpmi;
-}
-
-sub summary {
-    my ($o) = @_;
-    configureTimezone($o);
-    configurePrinter($o) if $o->{printer};
-}
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
-    my ($o) = @_;
-    install_any::preConfigureTimezone($o);
-
-    $o->pkg_install('ntp') if $o->{timezone}{ntp};
-
-    require timezone;
-    timezone::write($o->{prefix}, $o->{timezone});
-}
-
-#------------------------------------------------------------------------------
-sub configureServices {
-    my ($o) = @_;
-    if ($o->{services}) {
-	require services;
-	services::doit($o, $o->{services}, $o->{prefix});
-    }
-}
-#------------------------------------------------------------------------------
-sub configurePrinter {
-    my($o) = @_;
-    $o->do_pkgs->install('foomatic', 'printer-utils','printer-testpages',
-			 if_($o->do_pkgs->is_installed('gimp'), 'gimpprint'));
-    
-    require printer;
-    eval { add2hash($o->{printer} ||= {}, printer::getinfo($o->{prefix})) }; #- get existing configuration.
-
-    require printerdrake;
-    printerdrake::install_spooler($o->{printer}, $o); #- not interactive...
-
-    foreach (values %{$o->{printer}{configured} || {}}) {
-	log::l("configuring printer queue " . $_->{queuedata}{queue} || $_->{QUEUE});
-	#- when copy is so adulée (sorry french taste :-)
-	#- and when there are some configuration in one place and in another place...
-	$o->{printer}{currentqueue} = {};
-	printer::copy_printer_params($_->{queuedata}, $o->{printer}{currentqueue});
-	printer::copy_printer_params($_, $o->{printer});
-	#- setup all configured queues, which is not the case interactively where
-	#- only the working queue is setup on configuration.
-	printer::configure_queue($o->{printer});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($o) = @_;
-    my $p = $o->{prefix};
-    my $u = $o->{superuser} ||= {};
-    $o->{superuser}{name} = 'root';
-    any::write_passwd_user($o->{prefix}, $o->{superuser}, $o->{authentication}{md5});
-    delete $o->{superuser}{name};
-}
-
-#------------------------------------------------------------------------------
-
-sub addUser {
-    my ($o) = @_;
-    my $p = $o->{prefix};
-    my $users = $o->{users} ||= [];
-
-    my (%uids, %gids); 
-    foreach (glob_("$p/home")) { my ($u, $g) = (stat($_))[4,5]; $uids{$u} = 1; $gids{$g} = 1; }
-
-    foreach (@$users) {
-	$_->{home} ||= "/home/$_->{name}";
-
-	my $u = $_->{uid} || ($_->{oldu} = (stat("$p$_->{home}"))[4]);
-	my $g = $_->{gid} || ($_->{oldg} = (stat("$p$_->{home}"))[5]);
-	#- search for available uid above 501 else initscripts may fail to change language for KDE.
-	if (!$u || getpwuid($u)) { for ($u = 501; getpwuid($u) || $uids{$u}; $u++) {} }
-	if (!$g                ) { for ($g = 501; getgrgid($g) || $gids{$g}; $g++) {} }
-	
-	$_->{uid} = $u; $uids{$u} = 1;
-	$_->{gid} = $g; $gids{$g} = 1;
-
-	push @{$_->{groups} ||= []}, 'usb' if $o->{security} <= 3;
-    }
-
-    any::write_passwd_user($p, $_, $o->{authentication}{md5}) foreach @$users;
-
-    local *F;
-    open F, ">> $p/etc/group" or die "can't append to group file: $!";
-    print F "$_->{name}:x:$_->{gid}:\n" foreach grep { ! getgrgid($_->{gid}) } @$users;
-
-    foreach my $u (@$users) {
-	if (! -d "$p$u->{home}") {
-	    my $mode = $o->{security} < 2 ? 0755 : 0750;
-	    eval { cp_af("$p/etc/skel", "$p$u->{home}") };
-	    if ($@) {
-		log::l("copying of skel failed: $@"); mkdir("$p$u->{home}", $mode); 
-	    } else {
-		chmod $mode, "$p$u->{home}";
-	    }
-	}
-	require commands;
-	eval { commands::chown_("-r", "$u->{uid}.$u->{gid}", "$p$u->{home}") }
-	    if $u->{uid} != $u->{oldu} || $u->{gid} != $u->{oldg};
-    }
-    any::addUsers($p, $users);
-
-    $o->pkg_install("autologin") if $o->{autologin};
-    any::set_autologin($p, $o->{autologin}, $o->{desktop});
-
-    install_any::setAuthentication($o);
-
-    install_any::disable_user_view($p) if @$users == ();
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk($) {
-    my ($o) = @_;
-    my $dev = $o->{mkbootdisk} or return;
-
-    my @l = detect_devices::floppies_dev();
-
-    $dev = shift @l || die _("No floppy drive available")
-      if $dev eq "1"; #- special case meaning autochoose
-
-    return if $::testing;
-
-    require bootloader;
-    bootloader::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
-    $o->{mkbootdisk} = $dev;
-}
-
-#------------------------------------------------------------------------------
-sub readBootloaderConfigBeforeInstall {
-    my ($o) = @_;
-    my ($image, $v);
-
-    require bootloader;
-    add2hash($o->{bootloader} ||= {}, bootloader::read($o->{prefix}, arch() =~ /sparc/ ? "/etc/silo.conf" : arch() =~ /ppc/ ? "/etc/yaboot.conf" : "/etc/lilo.conf"));
-
-    #- since kernel or kernel-smp may not be upgraded, it should be checked
-    #- if there is a need to update existing lilo.conf entries by following
-    #- symlinks before kernel or other packages get installed.
-    #- update everything that could be a filename (for following symlink).
-    foreach my $e (@{$o->{bootloader}{entries}}) {
-	while (my $v = readlink "$o->{prefix}/$e->{kernel_or_dev}") {
-	    $v = "/boot/$v" if $v !~ m|^/|; -e "$o->{prefix}$v" or last;
-	    log::l("renaming /boot/$e->{kernel_or_dev} entry by $v");
-	    $e->{kernel_or_dev} = $v;
-	}
-	while (my $v = readlink "$o->{prefix}/$e->{initrd}") {
-	    $v = "/boot/$v" if $v !~ m|^/|; -e "$o->{prefix}$v" or last;
-	    log::l("renaming /boot/$e->{initrd} entry by $v");
-	    $e->{initrd} = $v;
-	}
-    }
-}
-
-sub setupBootloaderBefore {
-    my ($o) = @_;
-
-    require bootloader;
-    if (my @l = (grep { $_->{interface_type} eq 'ide' } detect_devices::burners(), detect_devices::raw_zips())) {
-	bootloader::add_append($o->{bootloader}, $_->{device}, 'ide-scsi') foreach @l;
-    }
-    if ($o->{miscellaneous}{HDPARM}) {
-	bootloader::add_append($o->{bootloader}, $_, 'autotune') foreach grep { /ide.*/ } all("/proc/ide");
-    }
-    if (grep { /mem=nopentium/ } cat_("/proc/cmdline")) {
-	bootloader::add_append($o->{bootloader}, 'mem', 'nopentium');
-    }
-
-    if (arch() =~ /alpha/) {
-	if (my $dev = fsedit::get_root($o->{fstab})) {
-	    $o->{bootloader}{boot} ||= "/dev/$dev->{rootDevice}";
-	    $o->{bootloader}{root} ||= "/dev/$dev->{device}";
-	    $o->{bootloader}{part_nb} ||= first($dev->{device} =~ /(\d+)/);
-	}
-    } else {
-	#- check for valid fb mode to enable a default boot with frame buffer.
-	my $vga = $o->{allowFB} && (!detect_devices::matching_desc('3D Rage LT') &&
-				    !detect_devices::matching_desc('Rage Mobility [PL]') &&
-				    !detect_devices::matching_desc('i740') &&
-				    !detect_devices::matching_desc('Matrox') &&
-				    !detect_devices::matching_desc('Tseng.*ET6\d00') &&
-				    !detect_devices::matching_desc('SiS.*SG86C2.5') &&
-				    !detect_devices::matching_desc('SiS.*559[78]') &&
-				    !detect_devices::matching_desc('SiS.*300') &&
-				    !detect_devices::matching_desc('SiS.*540') &&
-				    !detect_devices::matching_desc('SiS.*6C?326') &&
-				    !detect_devices::matching_desc('SiS.*6C?236') &&
-				    !detect_devices::matching_desc('Voodoo [35]|Voodoo Banshee') && #- 3d acceleration seems to bug in fb mode
-				    !detect_devices::matching_desc('8281[05].* CGC') #- i810 now have FB support during install but we disable it afterwards
-				   );
-	my $force_vga = $o->{allowFB} && (detect_devices::matching_desc('SiS.*630') || #- SiS 630 need frame buffer.
-					  detect_devices::matching_desc('GeForce.*Integrated') #- needed for fbdev driver (hack).
-					 );
-
-	#- propose the default fb mode for kernel fb, if aurora or bootsplash is installed.
-	my $need_fb = grep {
-	    my $p = pkgs::packageByName($o->{packages}, $_);
-	    $p && pkgs::packageFlagInstalled($p);
-	} 'Aurora', 'bootsplash';
-        bootloader::suggest($o->{prefix}, $o->{bootloader}, $o->{all_hds}{hds}, $o->{fstab},
-			    ($force_vga || $vga && $need_fb) && $o->{vga}, $o->{meta_class} ne 'server');
-	bootloader::suggest_floppy($o->{bootloader}) if $o->{security} <= 3 && arch() !~ /ppc/;
-
-	$o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
-    }
-}
-
-sub setupBootloader($) {
-    my ($o) = @_;
-    return if $::g_auto_install;
-
-    if (arch() =~ /alpha/) {
-	return if $::testing;
-	my $b = $o->{bootloader};
-	$b->{boot} or $o->ask_warn('', "Can't install aboot, not a bsd disklabel"), return;
-		
-	run_program::rooted($o->{prefix}, "swriteboot", $b->{boot}, "/boot/bootlx") or do {
-	    cdie "swriteboot failed";
-	    run_program::rooted($o->{prefix}, "swriteboot", "-f1", $b->{boot}, "/boot/bootlx");
-	};
-	run_program::rooted($o->{prefix}, "abootconf", $b->{boot}, $b->{part_nb});
- 
-        modules::load('loop');
-	output "$o->{prefix}/etc/aboot.conf", 
-	map_index { -e "$o->{prefix}/boot/initrd-$_->[1]" ? 
-			    "$::i:$b->{part_nb}$_->[0] root=$b->{root} initrd=/boot/initrd-$_->[1] $b->{perImageAppend}\n" :
-			    "$::i:$b->{part_nb}$_->[0] root=$b->{root} $b->{perImageAppend}\n" }
-	map { run_program::rooted($o->{prefix}, "mkinitrd", "-f", "/boot/initrd-$_->[1]", "--ifneeded", $_->[1]) ;#or
-	  #unlink "$o->{prefix}/boot/initrd-$_->[1]";$_ } grep { $_->[0] && $_->[1] }
-	  $_ } grep { $_->[0] && $_->[1] }
-	map { [ m|$o->{prefix}(/boot/vmlinux-(.*))| ] } glob_("$o->{prefix}/boot/vmlinux-*");
-#	output "$o->{prefix}/etc/aboot.conf", 
-#	  map_index { "$::i:$b->{part_nb}$_ root=$b->{root} $b->{perImageAppend}\n" }
-#	    map { /$o->{prefix}(.*)/ } eval { glob_("$o->{prefix}/boot/vmlinux*") };
-    } else {
-	require bootloader;
-	bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub configureXBefore {
-    my ($o) = @_;
-    my $xkb = $o->{X}{keyboard}{xkb_keymap} || keyboard::keyboard2xkb($o->{keyboard});
-    $xkb = '' if !($xkb && $xkb =~ /([^(]*)/ && -e "$o->{prefix}/usr/X11R6/lib/X11/xkb/symbols/$1");
-    if (!$xkb && (my $f = keyboard::xmodmap_file($o->{keyboard}))) {
-	cp_af($f, "$o->{prefix}/etc/X11/xinit/Xmodmap");	
-	$xkb = '';
-    }
-    {
-	my $f = "$o->{prefix}/etc/sysconfig/i18n";
-	setVarsInSh($f, add2hash_({ XKB_IN_USE => $xkb ? '': 'no' }, { getVarsFromSh($f) }));
-    }
-    $o->{X}{keyboard}{xkb_keymap} = $xkb;
-    $o->{X}{mouse} = $o->{mouse};
-    $o->{X}{wacom} = $o->{wacom};
-
-    require Xconfig;
-    Xconfig::getinfoFromDDC($o->{X});
-    Xconfig::getinfoFromXF86Config($o->{X}, $o->{prefix}); #- take default from here at least.
-
-    #- keep this here if the package has to be updated.
-    $o->pkg_install("XFree86");
-}
-sub configureX {
-    my ($o) = @_;
-    $o->configureXBefore;
-
-    require Xconfigurator;
-    require class_discard;
-    { local $::testing = 0; #- unset testing
-      local $::auto = 1;
-      $o->{X}{skiptest} = 1;
-      Xconfigurator::main($o->{prefix}, $o->{X}, class_discard->new, $o->do_pkgs,
-			  { allowFB          => $o->{allowFB},
-			    allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
-			  });
-    }
-    $o->configureXAfter;
-}
-sub configureXAfter {
-    my ($o) = @_;
-    if ($o->{X}{card}{server} eq 'FBDev') {
-	unless (install_any::setupFB($o, Xconfigurator::getVGAMode($o->{X}))) {
-	    log::l("disabling automatic start-up of X11 if any as setup framebuffer failed");
-	    any::runlevel($o->{prefix}, 3) unless $::testing; #- disable automatic start-up of X11 on error.
-	}
-    }
-    if ($o->{X}{default_depth} >= 16 && $o->{X}{card}{default_wres} >= 1024) {
-	log::l("setting large icon style for kde");
-	install_any::kderc_largedisplay($o->{prefix});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub miscellaneousBefore {
-    my ($o) = @_;
-
-    my %s = getVarsFromSh("$o->{prefix}/etc/sysconfig/system");
-    $o->{miscellaneous}{HDPARM} = $s{HDPARM} if exists $s{HDPARM};
-    $o->{security} ||= any::get_secure_level($o->{prefix}) || ($o->{meta_class} eq 'server' ? 3 : 2);
-
-    log::l("security $o->{security}");
-
-    add2hash_($o->{miscellaneous} ||= {}, { numlock => !detect_devices::isLaptop() });
-}
-sub miscellaneous {
-    my ($o) = @_;
-    #- keep some given parameters
-    #-TODO
-}
-sub miscellaneousAfter {
-    my ($o) = @_;
-    add2hash_ $o, { useSupermount => 1 && $o->{security} < 4 && arch() !~ /sparc/ && !$::corporate };
-
-    $ENV{SECURE_LEVEL} = $o->{security}; #- deprecated with chkconfig 1.3.4-2mdk, uses /etc/sysconfig/msec
-
-    addToBeDone {
-	mkdir_p("$o->{prefix}/etc/security/msec");
-	symlink "server.$o->{security}", "$o->{prefix}/etc/security/msec/server" if $o->{security} > 3;
-	setVarsInSh("$o->{prefix}/etc/sysconfig/msec", { SECURE_LEVEL => $o->{security} });
-    } 'formatPartitions';
-
-    addToBeDone {
-	setVarsInSh("$o->{prefix}/etc/sysconfig/system", { 
-            CLASS => $::expert && 'expert' || 'beginner',
-            SECURITY => $o->{security},
-	    META_CLASS => $o->{meta_class} || 'PowerPack',
-        });
-	substInFile { s/KEYBOARD_AT_BOOT=.*/KEYBOARD_AT_BOOT=yes/ } "$o->{prefix}/etc/sysconfig/usb" if detect_devices::usbKeyboards();
-
-    } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall { 
-    my ($o) = @_;
-    eval { 
-	my $report = '/root/drakx/report.bug';
-	output "$o->{prefix}$report", install_any::report_bug($o->{prefix});
-	run_program::rooted($o->{prefix}, 'gzip', $report);
-    };
-    install_any::getAndSaveAutoInstallFloppy($o, 1, "$o->{prefix}/root/drakx/replay_install.img" );
-    eval { output "$o->{prefix}/root/drakx/README", "This directory contains several installation-related files,
-mostly log files (very useful if you ever report a bug!).
-
-Beware that some Mandrake tools rely on the contents of some
-of these files... so remove any file from here at your own
-risk!
-" };
-    install_any::unlockCdrom;
-    install_any::log_sizes($o);
-}
-
-#------------------------------------------------------------------------------
-sub hasNetwork {
-    my ($o) = @_;
-    $o->{netcnx}{type} && $o->{netc}{NETWORKING} ne 'no' and return 1;
-    log::l("no network seems to be configured for internet ($o->{netcnx}{type},$o->{netc}{NETWORKING})");
-    0;
-}
-
-#------------------------------------------------------------------------------
-sub upNetwork {
-    my ($o, $pppAvoided) = @_;
-
-    #- do not destroy this file if prefix is '' or even '/' (could it happens ?).
-    if (length($o->{prefix}) > 1) {
-	symlinkf("$o->{prefix}/etc/$_", "/etc/$_") foreach (qw(resolv.conf protocols services));
-    }
-    member($o->{method}, qw(ftp http nfs)) and return 1;
-    modules::write_conf($o->{prefix});
-    if (hasNetwork($o)) {
-	if ($o->{netcnx}{type} =~ /adsl|lan|cable/) {
-	    require network::netconnect;
-	    network::netconnect::start_internet($o);
-	    return 1;
-	} elsif (!$pppAvoided) {
-	    eval { modules::load(qw(serial ppp bsd_comp ppp_deflate)) };
-	    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "start");
-	    require network::netconnect;
-	    network::netconnect::start_internet($o);
-	    return 1;
-	}
-    }
-    $::testing;
-}
-
-#------------------------------------------------------------------------------
-sub downNetwork {
-    my ($o, $costlyOnly) = @_;
-
-    $o->{method} eq "ftp" || $o->{method} eq "http" || $o->{method} eq "nfs" and return 1;
-    modules::write_conf($o->{prefix});
-    if (hasNetwork($o)) {
-	if (!$costlyOnly) {
-	    require network::netconnect;
-	    network::netconnect::stop_internet($o);
-	    return 1;
-	} elsif ($o->{netc}{type} !~ /adsl|lan|cable/) {
-	    require network::netconnect;
-	    network::netconnect::stop_internet($o);
-	    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "stop");
-	    eval { modules::unload(qw(ppp_deflate bsd_comp ppp serial)) };
-	    return 1;
-	}
-    }
-    $::testing;
-}
-
-#------------------------------------------------------------------------------
-sub cleanIfFailedUpgrade($) {
-    my ($o) = @_;
-
-    #- if an upgrade has failed, there should be .mdkgisave files around.
-    if ($o->{isUpgrade}) {
-	foreach (@filesToSaveForUpgrade) {
-	    if (-e "$o->{prefix}/$_" && -e "$o->{prefix}/$_.mdkgisave") {
-		rename "$o->{prefix}/$_", "$o->{prefix}/$_.mdkginew"; #- keep new files around in case !
-		rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_";
-	    }
-	}
-    }
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_steps_auto_install.pm b/perl-install/install_steps_auto_install.pm
deleted file mode 100644
index cd0282800..000000000
--- a/perl-install/install_steps_auto_install.pm
+++ /dev/null
@@ -1,111 +0,0 @@
-package install_steps_auto_install; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $graphical @graphical_steps);
-
-@ISA = qw(install_steps);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_steps;
-
-sub new {
-    my ($type, $o) = @_;
-
-    # Handle legacy options
-    $o->{interactive} ||= 'gtk' if $graphical || !is_empty_array_ref($o->{interactiveSteps});
-    push @{$o->{interactiveSteps}}, qw(installPackages exitInstall), @graphical_steps;
-
-    if ($o->{interactive}) {
-        my $interactiveClass = "install_steps_$o->{interactive}";
-	require"$interactiveClass.pm"; #- no space to skip perl2fcalls
-
-	@ISA = ($interactiveClass, @ISA);
-
-	for (my $f = $o->{steps}{first}; $f; $f = $o->{steps}{$f}{next}) {
-	    my $auto_name = member($f, @{$o->{interactiveSteps}}) ? 'noauto' : 'auto';
-	    $o->{steps}{$f}{$auto_name} = 1;
-	}
-
-	goto &{$::{$interactiveClass . "::"}{new}};
-    } else {
-	@ISA = ('install_steps_auto_install_non_interactive', @ISA);
-	(bless {}, ref $type || $type)->install_steps::new($o);
-    }
-}
-
-
-sub exitInstall {
-    my ($o, $alldone) = @_;
-    return if $o->{autoExitInstall};
-
-    if ($o->{interactive}) {
-	$o->SUPER::exitInstall($alldone);
-    } else {
-	install_steps::exitInstall($o);
-	print "\a";
-	print "Auto installation complete (the postInstall is not done yet though)\n";
-	print "Press <Enter> to reboot\n";
-	<STDIN>;
-    }
-}
-
-
-#-######################################################################################
-#- install_steps_auto_install_non_interactive package
-#-######################################################################################
-package install_steps_auto_install_non_interactive;
-
-use install_steps;
-use lang;
-use modules;
-use common;
-use log;
-
-sub configureNetwork {
-    my ($o) = @_;
-    modules::load_category('network/main|usb');
-    goto &install_steps::configureNetwork;
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    my ($s, $t) = (__("Entering step `%s'\n"), $o->{steps}{$step}{text});
-    ($s, $t) = (translate($s), translate($t)) if $ENV{LANG} !~ /ja|ko|zh/;
-    print sprintf($s, $t);
-    $o->install_steps::enteringStep($step);
-}
-
-sub ask_warn {
-    log::l(ref $_[1] ? join " ", @{$_[1]} : $_[1]);
-}
-
-sub wait_message {}
-
-sub errorInStep {
-    print "error :(\n"; 
-    print "switch to console f2 for a shell\n";
-    print "Press <Enter> to reboot\n";
-    <STDIN>;
-    c::_exit(0);
-}
-
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o) = @_;
-    $o->install_steps::selectLanguage;
-    lang::load_console_font($o->{lang});
-}
-
-sub installPackages {
-    my ($o, $packages) = @_;
-    catch_cdie { $o->install_steps::installPackages($packages) } sub { print "$@\n"; 1 }
-}
-
-1;
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
deleted file mode 100644
index 5bebf5c84..000000000
--- a/perl-install/install_steps_gtk.pm
+++ /dev/null
@@ -1,703 +0,0 @@
-package install_steps_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_gtk);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive_gtk;
-use common;
-use my_gtk qw(:helpers :wrappers);
-use Gtk;
-use devices;
-use modules;
-use install_gtk;
-use install_any;
-use mouse;
-use help;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub new($$) {
-    my ($type, $o) = @_;
-
-    my $old = $SIG{__DIE__};
-    $SIG{__DIE__} = sub { $_[0] !~ /my_gtk\.pm/ and goto $old };
-
-    $ENV{DISPLAY} ||= $o->{display} || ":0";
-    unless ($::testing) {
-	if ($ENV{DISPLAY} eq ":0" && !$::live) {
-	    my $f = "/tmp/Xconf";
-	    install_gtk::createXconf($f, @{$o->{mouse}}{"XMOUSETYPE", "device"}, $o->{wacom}[0]);
-	    devices::make("/dev/kbd");
-
-	    local (*T1, *T2);
-	    open T1, ">/dev/tty5";
-	    open T2, ">/dev/tty6";
-
-	    my $launchX = sub {
-		my $ok = 1;
-		my $xpmac_opts = cat_("/proc/cmdline");
-		unless (-d "/var/log" ) { mkdir("/var/log"); }
-		local $SIG{CHLD} = sub { $ok = 0 if waitpid(-1, c::WNOHANG()) > 0 };
-		unless (fork) {
-		    exec $_[0], (arch() =~ /^sparc/ || arch() eq "ppc" ? () : ("-kb")), "-dpms","-s" ,"240",
-		      ($_[0] =~ /Xpmac/ ? $xpmac_opts !~ /ofonly/ ? ("-mode", "17", "-depth", "32") : ("-mach64"):()),
-		      ($_[0] =~ /Xsun/ || $_[0] =~ /Xpmac/ ? ("-fp", "/usr/X11R6/lib/X11/fonts:unscaled") :
-		       ("-allowMouseOpenFail", "-xf86config", $f)) or exit 1;
-		}
-		foreach (1..60) {
-		    sleep 1;
-		    log::l("Server died"), return 0 if !$ok;
-		    if (c::Xtest($ENV{DISPLAY})) {
-			fork || exec("aewm-drakx") || exec("true");
-			return 1;
-		    }
-		}
-		log::l("Timeout!!");
-		0;
-	    };
-	    my @servers = qw(FBDev VGA16); #-)
-	    if (arch() eq "alpha") {
-		require Xconfigurator;
-		my $card = Xconfigurator::cardConfigurationAuto();
-		Xconfigurator::updateCardAccordingName($card, $card->{type}) if $card && $card->{type};
-		@servers = $card->{server} || "TGA";
-		#-@servers = qw(SVGA 3DLabs TGA) 
-	    } elsif (arch() =~ /^sparc/) {
-		local $_ = cat_("/proc/fb");
-		if (/Mach64/) { @servers = qw(Mach64) }
-		elsif (/Permedia2/) { @servers = qw(3DLabs) }
-		else { @servers = qw(Xsun24) }
-	    } elsif (arch() =~ /ia64/) {
-		@servers= 'XFree86';
-	    } elsif (arch() eq "ppc") {
-	    	@servers = qw(Xpmac);
-            }
-
-	    foreach (@servers) {
-		log::l("Trying with server $_");
-		my $dir = "/usr/X11R6/bin";
-		my $prog = /Xsun|Xpmac|XFree86/ ? $_ : "XF86_$_";
-		unless (-x "$dir/$prog") {
-		    unlink $_ foreach glob_("$dir/X*");
-		    install_any::getAndSaveFile("Mandrake/mdkinst$dir/$prog", "$dir/$prog") or die "failed to get server $prog: $!";
-		    chmod 0755, "$dir/$prog";
-		}
-		if (/FB/) {
-		    !$o->{vga16} && $o->{allowFB} or next;
-
-		    $o->{allowFB} = &$launchX($prog) #- keep in mind FB is used.
-		      and goto OK;
-		} else {
-		    $o->{vga16} = 1 if /VGA16/;
-		    &$launchX($prog) and goto OK;
-		}
-	    }
-	    return undef;
-	}
-    }
-  OK:
-    install_gtk::init_sizes();
-    install_gtk::default_theme($o);
-    install_gtk::create_logo_window($o);
-
-    $my_gtk::force_center = [ $::rootwidth - $::windowwidth, $::logoheight, $::windowwidth, $::windowheight ];
-
-    $o = (bless {}, ref $type || $type)->SUPER::new($o);
-    $o->interactive_gtk::new;
-    $o;
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-
-    printf "Entering step `%s'\n", $o->{steps}{$step}{text};
-    $o->SUPER::enteringStep($step);
-    install_gtk::create_steps_window($o);
-    install_gtk::create_help_window($o);
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    $o->SUPER::leavingStep($step);
-}
-
-
-sub charsetChanged {
-    my ($o) = @_;
-    Gtk->set_locale;
-    install_gtk::install_theme($o);
-    install_gtk::create_steps_window($o);
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o, $first_time) = @_;
-    $o->SUPER::selectLanguage;
-  
-    $o->ask_warn('',
-_("Your system is low on resources. You may have some problem installing
-Mandrake Linux. If that occurs, you can try a text install instead. For this,
-press `F1' when booting on CDROM, then enter `text'.")) if $first_time && availableRamMB() < 60; # 60MB
-
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
-    my ($o, $verif, $l, $def, $l2, $def2) = @_;
-    $::live || @$l == 1 and return $o->SUPER::selectInstallClass1($verif, $l, $def, $l2, $def2);
-
-    my $w = my_gtk->new(_("Install Class"));
-    my $focused;
-    gtkadd($w->{window},
-	   gtkpack($w->create_box_with_title(_("Please choose one of the following classes of installation:")),
-		   (my @radios = gtkradio($def, @$l)),
-		   gtkadd(create_vbox(),
-			  map { my $v = $_; 
-				my $b = new Gtk::Button(translate($_));
-				$focused = $b if $_ eq $def2;
-				gtksignal_connect($b, "clicked" => sub { $w->{retval} = $v; Gtk->main_quit });
-			    } @$l2)
-		  ));
-    $focused->grab_focus if $focused;
-    $w->main;
-
-    mapn { $verif->($_[1]) if $_[0]->active } \@radios, $l;
-    install_gtk::create_steps_window($o);
-
-    $w->{retval};
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($o, $force) = @_;
-    my %old = %{$o->{mouse}};
-    $o->SUPER::selectMouse($force) or return;
-    my $mouse = $o->{mouse};
-    $mouse->{type} eq 'none' ||
-      $old{type}   eq $mouse->{type}   && 
-      $old{name}   eq $mouse->{name}   &&
-      $old{device} eq $mouse->{device} && !$force and return;
-
-    local $my_gtk::grab = 1; #- unsure a crazy mouse don't go wild clicking everywhere
-
-    while (1) {
-	log::l("telling X server to use another mouse");
-	eval { modules::load('serial') } if $mouse->{device} =~ /ttyS/;
-
-	if (!$::testing) {
-	    devices::make($mouse->{device});
-	    symlinkf($mouse->{device}, "/dev/mouse");
-	    c::setMouseLive($ENV{DISPLAY}, mouse::xmouse2xId($mouse->{XMOUSETYPE}), $mouse->{nbuttons} < 3);
-	}
-	mouse::test_mouse_install($mouse) and return;
-	$o->SUPER::selectMouse(1);
-	$mouse = $o->{mouse};
-    } 
-}
-
-#------------------------------------------------------------------------------
-sub chooseSizeToInstall {
-    my ($o, $packages, $min_size, $def_size, $max_size_, $availableC, $individual) = @_;
-    my $max_size = min($max_size_, $availableC);
-    my $enough = $max_size == $max_size_;
-    my $percentage = int 100 * $max_size / $max_size_;
-
-    #- don't ask anything if the difference between min and max is too small
-    log::l("chooseSizeToInstall: min_size=$min_size, def_size=$def_size, max_size=$max_size_, available=$availableC");
-    return $max_size if $min_size && $max_size / $min_size < 1.05;
-
-    log::l("choosing size to install between $min_size and $max_size");
-    my $w = my_gtk->new('');
-    my $adj = create_adjustment(int(100 * $def_size / $max_size_), $min_size * 100 / $max_size_, $percentage);
-    my $spin = gtkset_usize(new Gtk::SpinButton($adj, 0, 0), 20, 0);
-    my $val;
-
-    require pkgs;
-    gtkadd($w->{window},
-	  gtkpack(new Gtk::VBox(0,20),
-		  _("The total size for the groups you have selected is approximately %d MB.\n", pkgs::correctSize($max_size_ / sqr(1024))) .
-		  ($enough ?
-_("If you wish to install less than this size,
-select the percentage of packages that you want to install.
-
-A low percentage will install only the most important packages;
-a percentage of 100%% will install all selected packages.") : 
-_("You have space on your disk for only %d%% of these packages.
-
-If you wish to install less than this,
-select the percentage of packages that you want to install.
-A low percentage will install only the most important packages;
-a percentage of %d%% will install as many packages as possible.", $percentage, $percentage))
-. ($individual ? "\n\n" . _("You will be able to choose them more specifically in the next step.") : ''),
-		 create_packtable({},
-				  [ _("Percentage of packages to install") . '  ', $spin, "%", my $mb = new Gtk::Label ],
-				  [ undef, new Gtk::HScrollbar($adj) ],
-			       ),
-		 create_okcancel($w)
-		)
-	 );
-    $spin->signal_connect(changed => my $changed = sub { 
-	$val = $spin->get_value_as_int / 100 * $max_size_;
-	$mb->set(sprintf("(%dMB)", pkgs::correctSize($val / sqr(1024)))); 
-    }); &$changed();
-    $spin->signal_connect(activate => sub { $w->{retval} = 1; Gtk->main_quit });
-    $spin->grab_focus();
-    $w->main and $val + 1; #- add a single byte (hack?) to make selection of 0 bytes ok.
-}
-
-sub reallyChooseGroups {
-    my ($o, $size_to_display, $individual, $val) = @_;
-
-    my $w = my_gtk->new('');
-    my $tips = new Gtk::Tooltips;
-    my $w_size = new Gtk::Label(&$size_to_display);
-
-    my $entry = sub {
-	my ($e) = @_;
-	my $text = translate($o->{compssUsers}{$e}{label});
-	my $help = translate($o->{compssUsers}{$e}{descr});
-
-	my $file = do {
-	    my $f = "$ENV{SHARE_PATH}/icons/" . ($o->{compssUsers}{$e}{icons} || 'default');
-	    -e "$f.png" or $f .= "_section";
-	    -e "$f.png" or $f = "$ENV{SHARE_PATH}/icons/default_section";
-	    "$f.png";
-	};
-	my $check = Gtk::CheckButton->new($text);
-	$check->set_active($val->{$e});
-	$check->signal_connect(clicked => sub { 
-	    $val->{$e} = $check->get_active;
-	    $w_size->set(&$size_to_display);
-	});
-	gtkset_tip($tips, $check, $help);
-	gtkpack_(new Gtk::HBox(0,0), 0, gtkpng($file), 1, $check);
-	#$check;
-    };
-    my $entries_in_path = sub {
-	my ($path) = @_;
-	translate($path), map { $entry->($_) } grep { $o->{compssUsers}{$_}{path} eq $path } @{$o->{compssUsersSorted}};
-    };
-    gtkadd($w->{window},
-	   gtkpack($w->create_box_with_title(_("Package Group Selection")),
-		   gtkpack_(new Gtk::VBox(0,0),
-			   1, gtkpack_(new Gtk::HBox(0,0),
-			        $o->{meta_class} eq 'server' ? (
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Server'),
-					  ),
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Graphical Environment'),
-					   '',
-					   $entries_in_path->('Development'),
-					   '',
-					   $entries_in_path->('Utilities'),
-					  ),
-				) : (
-				   1, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Workstation'),
-					   '',
-					   $entry->('Development|Development'),
-					   $entry->('Development|Documentation'),
-					  ),
-				   0, gtkpack(new Gtk::VBox(0,0), 
-					   $entries_in_path->('Server'),
-					   '',
-					   $entries_in_path->('Graphical Environment'),
-					  ),
-				),
-			   )),
-		   '',
-		   gtkadd(new Gtk::HBox(0,0),
-			  $w_size,
-			  if_($individual, do {
-			      my $check = Gtk::CheckButton->new(_("Individual package selection"));
-			      $check->set_active($$individual);
-			      $check->signal_connect(clicked => sub { $$individual = $check->get_active });
-			      $check;
-			  }),
-			  gtksignal_connect(new Gtk::Button(_("Ok")), clicked => sub { Gtk->main_quit }),
-			 ),
-		  ),
-	  );
-    $w->{rwindow}->set_default_size($::windowwidth * 0.8, $::windowheight * 0.8);
-    $w->main;
-    1;    
-}
-
-
-sub choosePackagesTree {
-    my ($o, $packages, $limit_to_medium) = @_;
-
-    my $available = install_any::getAvailableSpace($o);
-    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-
-    my $common; $common = { get_status => sub {
-				my $size = pkgs::selectedSize($packages);
-				_("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available / sqr(1024));
-			    },
-			    node_state => sub {
-				my $p = pkgs::packageByName($packages,$_[0]) or return;
-				pkgs::packageMedium($packages, $p)->{selected} or return;
-				pkgs::packageFlagBase($p) and return 'base';
-				pkgs::packageFlagInstalled($p) and return 'installed';
-				pkgs::packageFlagSelected($p) and return 'selected';
-				return 'unselected';
-			    },
-			    build_tree => sub {
-				my ($add_node, $flat) = @_;
-				if ($flat) {
-				    foreach (sort keys %{$packages->{names}}) {
-					!$limit_to_medium ||
-					  pkgs::packageMedium($packages, $packages->{names}{$_}) == $limit_to_medium or next;
-					$add_node->($_, undef);
-				    }
-				} else {
-				    foreach my $root (@{$o->{compssUsersSorted}}) {
-					my (%fl, @firstchoice, @others);
-					#$fl{$_} = $o->{compssUsersChoice}{$_} foreach @{$o->{compssUsers}{$root}{flags}}; #- FEATURE:improve choce of packages...
-					$fl{$_} = 1 foreach @{$o->{compssUsers}{$root}{flags}};
-					foreach my $p (values %{$packages->{names}}) {
-					    !$limit_to_medium || pkgs::packageMedium($packages, $p) == $limit_to_medium or next;
-					    my ($rate, @flags) = pkgs::packageRateRFlags($p);
-					    next if !($rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags);
-					    $rate >= 3 ?
-					      push(@firstchoice, pkgs::packageName($p)) :
-						push(@others,      pkgs::packageName($p));
-					}
-					my $root2 = join('|', map { translate($_) } split('\|', $root));
-					$add_node->($_, $root2                   ) foreach sort @firstchoice;
-					$add_node->($_, $root2 . '|' . _("Other")) foreach sort @others;
-				    }
-				}
-			    },
-			    get_info => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return '';
-				pkgs::extractHeaders($o->{prefix}, [$p], $packages->{mediums});
-				pkgs::packageHeader($p) or die;
-
-				my $imp = translate($pkgs::compssListDesc{pkgs::packageFlagBase($p) ?
-									  5 : pkgs::packageRate($p)});
-
-				my $info = $@ ? _("Bad package") :
-				  (_("Name: %s\n", pkgs::packageName($p)) .
-				   _("Version: %s\n", pkgs::packageVersion($p) . '-' . pkgs::packageRelease($p)) .
-				   _("Size: %d KB\n", pkgs::packageSize($p) / 1024) .
-				   ($imp && _("Importance: %s\n", $imp)) . "\n" .
-				   formatLines(c::headerGetEntry(pkgs::packageHeader($p), 'description')));
-				pkgs::packageFreeHeader($p);
-				return $info;
-			    },
-			    toggle_nodes => sub {
-				my $set_state = shift @_;
-				my @n = map { pkgs::packageByName($packages, $_) } @_;
-				my %l;
-				my $isSelection = !pkgs::packageFlagSelected($n[0]);
-				foreach (@n) {
-				    pkgs::togglePackageSelection($packages, $_, my $l = {});
-				    @l{grep {$l->{$_}} keys %$l} = ();
-				}
-				if (my @l = keys %l) {
-				    #- check for size before trying to select.
-				    my $size = pkgs::selectedSize($packages);
-				    foreach (@l) {
-					my $p = $packages->{names}{$_};
-					pkgs::packageFlagSelected($p) or $size += pkgs::packageSize($p);
-				    }
-				    if (pkgs::correctSize($size / sqr(1024)) > $available / sqr(1024)) {
-					return $o->ask_warn('', _("You can't select this package as there is not enough space left to install it"));
-				    }
-
-				    @l > @n && $common->{state}{auto_deps} and
-				      $o->ask_okcancel('', [ $isSelection ? 
-							     _("The following packages are going to be installed") :
-							     _("The following packages are going to be removed"),
-							     common::formatList(20, sort @l) ], 1) || return;
-				    if ($isSelection) {
-					pkgs::selectPackage($packages, $_) foreach @n;
-				    } else {
-					pkgs::unselectPackage($packages, $_) foreach @n;
-				    }
-				    foreach (@l) {
-					my $p = pkgs::packageByName($packages, $_);
-					$set_state->($_, pkgs::packageFlagSelected($p) ? 'selected' : 'unselected');
-				    }
-				} else {
-				    $o->ask_warn('', _("You can't select/unselect this package"));
-				}
-			    },
-			    grep_allowed_to_toggle => sub {
-				grep { $_ ne _("Other") && !pkgs::packageFlagBase(pkgs::packageByName($packages, $_)) } @_;
-			    },
-			    grep_unselected => sub {
-				grep { !pkgs::packageFlagSelected(pkgs::packageByName($packages, $_)) } @_;
-			    },
-			    check_interactive_to_toggle => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return;
-				if (pkgs::packageFlagBase($p)) {
-				    $o->ask_warn('', _("This is a mandatory package, it can't be unselected"));
-				} elsif (pkgs::packageFlagInstalled($p)) {
-				    $o->ask_warn('', _("You can't unselect this package. It is already installed"));
-				} elsif (pkgs::packageFlagUpgrade($p)) {
-				    if ($::expert) {
-					if (pkgs::packageFlagSelected($p)) {
-					    $o->ask_yesorno('', _("This package must be upgraded.\nAre you sure you want to deselect it?")) or return;
-					}
-					return 1;
-				    } else {
-					$o->ask_warn('', _("You can't unselect this package. It must be upgraded"));
-				    }
-				} else { return 1; }
-				return;
-			    },
-			    auto_deps => _("Show automatically selected packages"),
-			    ok => _("Install"),
-			    cancel => $limit_to_medium && _("Cancel"),
-			    icons => [ { icon         => 'floppy',
-					 help         => _("Load/Save on floppy"),
-					 wait_message => _("Updating package selection"),
-					 code         => sub { $o->loadSavePackagesOnFloppy($packages); 1; },
-				       }, 
-				       if_(0, 
-				       { icon         => 'feather',
-					 help         => _("Minimal install"),
-					 code         => sub {
-					     
-					     install_any::unselectMostPackages($o);
-					     pkgs::setSelectedFromCompssList($packages, { SYSTEM => 1 }, 4, $availableCorrected);
-					     1;
-					 } }),
-				     ],
-			    state => {
-				      auto_deps => 1,
-				      flat      => $limit_to_medium,
-				     },
-			  };
-
-    $o->set_help('choosePackagesTree');
-    $o->ask_browse_tree_info('', _("Choose the packages you want to install"), $common);
-}
-
-#------------------------------------------------------------------------------
-sub beforeInstallPackages {
-    my ($o) = @_;    
-    $o->SUPER::beforeInstallPackages;
-    install_any::copy_advertising($o);
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($o, $packages) = @_;
-
-    my ($current_total_size, $last_size, $nb, $total_size, $start_time, $last_dtime, $trans_progress_total);
-
-    my $w = my_gtk->new(_("Installing"));
-    $w->sync;
-    my $text = new Gtk::Label;
-    my ($advertising, $change_time, $i);
-    my $show_advertising if 0;
-    $show_advertising = to_bool(@install_any::advertising_images) if !defined $show_advertising;
-    my ($msg, $msg_time_remaining, $msg_time_total) = map { new Gtk::Label($_) } '', (_("Estimating")) x 2;
-    my ($progress, $progress_total) = map { new Gtk::ProgressBar } (1..2);
-    $w->{rwindow}->set_policy(1, 1, 1);
-    gtkadd($w->{window}, my $box = new Gtk::VBox(0,10));
-    $box->pack_end(gtkshow(gtkpack(gtkset_usize(new Gtk::VBox(0,5), $::windowwidth * 0.8, 0),
-			   $msg, $progress,
-			   create_packtable({},
-					    [_("Time remaining "), $msg_time_remaining],
-#					    [_("Total time "), $msg_time_total],
-					   ),
-			   $text,
-			   $progress_total,
-			   gtkadd(create_hbox(),
-				  my $cancel = new Gtk::Button(_("Cancel")),
-				  my $details = new Gtk::Button(_("Details")),
-				  ),
-			  )), 0, 1, 0);
-    $details->hide if !@install_any::advertising_images;
-    $w->sync;
-    $msg->set(_("Please wait, preparing installation..."));
-    gtkset_mousecursor_normal($cancel->window);
-    gtkset_mousecursor_normal($details->window);
-    my $advertize = sub {
-	@install_any::advertising_images or return;
-	$show_advertising ? $_->hide : $_->show foreach $msg, $progress, $text;
-	gtkdestroy($advertising) if $advertising;
-	if ($show_advertising && $_[0]) {
-	    $change_time = time();
-	    my $f = $install_any::advertising_images[$i++ % @install_any::advertising_images];
-	    log::l("advertising $f");
-	    my $pl = $f; $pl =~ s/\.png$/\.pl/;
-	    my $icon_name = $f; $icon_name =~ s/\.png$/_icon\.png/;
-	    my ($draw_text, $width, $height, @data, $icon, $icon_dx, $icon_dy, $icon_px);
-	    -e $pl and $draw_text = 1;
-	    eval(cat_($pl)) if $draw_text;
-	    my ($pix, undef) = gtkcreate_png($f);
-	    if ($icon) {
-		($icon_px, undef) = gtkcreate_png($icon_name);
-	    }
-	    my $dbl_area;
-	    my $darea = new Gtk::DrawingArea;
-	    gtkpack($box, $advertising = !$draw_text ?
-		    gtkpng($f) :
-		    gtksignal_connect(gtkset_usize($darea, $width, $height), expose_event => sub {
-			       my ($dx, $dy) = ($darea->allocation->[2], $darea->allocation->[3]);
-			       if (!defined($dbl_area)) {
-				   $dbl_area = new Gtk::Gdk::Pixmap($darea->window, $dx, $dy);
-				   $dbl_area->draw_rectangle($darea->style->bg_gc('active'), 1, 0, 0, $dx, $dy);
-				   $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
-							  $pix, 0, 0, ($dx-$width)/2, 0, $width, $height);
-				   my $gc_text = new Gtk::Gdk::GC($darea->window);
-				   $gc_text->set_foreground(gtkcolor(65535, 65535, 65535));
-				   my $yicon = 0;
-				   my $decy = 0;
-				   my $first = 1;
-				   foreach (@data) {
-				       my ($text, $x, $y, $area_width, $area_height, $bold) = @$_;
-				       my ($width, $height, $lines, $widths, $heights, $ascents, $descents) =
-					 get_text_coord ($text, $darea, $area_width, $area_height, 1, 0, 1, 1);
-				       if ($first && $icon) {
-					   my $iconx = ($dx-$width)/2 + $x + ${$widths}[0] - $icon_dx;
-					   my $icony = $y + ${$heights}[0] - $icon_dy/2;
-					   $icony > 0 or $icony = 0;
-					   $dbl_area->draw_pixmap($darea->style->bg_gc('normal'), $icon_px, 0, 0,
-								  $iconx, $icony, $icon_dx, $icon_dy
-								 );
-					   $yicon = $icony + $icon_dy;
-				       }
-				       my $i = 0;
-				       $yicon > $y + ${$heights}[0] and $decy = $yicon - ($y + ${$heights}[$i]);
-				       foreach (@{$lines}) {
-					   $dbl_area->draw_string($darea->style->font, $gc_text,
-								  ($dx-$width)/2 + $x + ${$widths}[$i], ( $first ? 0 : $decy ) + $y + ${$heights}[$i], $_);
- 					   $bold and $dbl_area->draw_string($darea->style->font, $gc_text,
-									    ($dx-$width)/2 + $x + ${$widths}[$i] + 1, ( $first ? 0 : $decy ) + $y + ${$heights}[$i], $_);
-					   $i++;
-				       }
-				       $first = 0;
-				   }
-			       }
-			       $darea->window->draw_pixmap($darea->style->bg_gc('normal'),
-							   $dbl_area, 0, 0, 0, 0, $dx, $dy);
-			   }));
-	} else {
-	    $advertising = undef;
-	}
-    };
-
-    $cancel->signal_connect(clicked => sub { $pkgs::cancel_install = 1 });
-    $details->signal_connect(clicked => sub {
-	invbool \$show_advertising;
-	$advertize->(1);
-    });
-    $advertize->();
-
-    my $oldInstallCallback = \&pkgs::installCallback;
-    local *pkgs::installCallback = sub {
-	my $m = shift;
-	if ($m =~ /^Starting installation/) {
-	    $nb = $_[0];
-	    $total_size = $_[1]; $current_total_size = 0;
-	    $start_time = time();
-	    $msg->set(_("%d packages", $nb));
-	    $w->flush;
-	} elsif ($m =~ /^Starting installing package/) {
-	    $progress->update(0);
-	    my $name = $_[0];
-	    $msg->set(_("Installing package %s", $name));
-	    $current_total_size += $last_size;
-	    my $p = pkgs::packageByName($o->{packages}, $name);
-	    $last_size = c::headerGetEntry(pkgs::packageHeader($p), 'size');
-	    $text->set((split /\n/, c::headerGetEntry(pkgs::packageHeader($p), 'summary'))[0] || '');
-	    $advertize->(1) if $show_advertising && $total_size > 20_000_000 && time() - $change_time > 20;
-	    $w->flush;
-	} elsif ($m =~ /^Progressing installing package/) {
-	    $progress->update($_[2] ? $_[1] / $_[2] : 0);
-
-	    my $dtime = time() - $start_time;
-	    my $ratio = 
-	      $total_size == 0 ? 0 :
-		pkgs::size2time($current_total_size + $_[1], $total_size) / pkgs::size2time($total_size, $total_size);
-	    $ratio >= 1 and $ratio = 1;
-	    my $total_time = $ratio ? $dtime / $ratio : time();
-
-#-	    my $ratio2 = $total_size == 0 ? 0 : ($current_total_size + $_[1]) / $total_size;
-#-	    log::l(sprintf("XXXX advance %d %d %s", $current_total_size + $_[1], $dtime, formatTimeRaw($total_time)));
-
-	    $progress_total->update($ratio);
-	    if ($dtime != $last_dtime && $current_total_size > 80_000_000) {
-		$msg_time_total->set(formatTime(10 * round($total_time / 10) + 10));
-#-		$msg_time_total->set(formatTimeRaw($total_time) . "  " . formatTimeRaw($dtime / $ratio2));
-		$msg_time_remaining->set(formatTime(10 * round(max($total_time - $dtime, 0) / 10) + 10));
-		$last_dtime = $dtime;
-	    }
-	    $w->flush;
-	} else { unshift @_, $m; goto $oldInstallCallback }
-    };
-    #- the modification is not local as the box should be living for other package installation.
-    undef *install_any::changeMedium;
-    *install_any::changeMedium = sub {
-	my ($method, $medium) = @_;
-
-	#- if not using a cdrom medium, always abort.
-	if ($method eq 'cdrom' && !$::oem) {
-	    local $my_gtk::grab = 1;
-	    my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	    local $| = 1; print "\a";
-	    my $time = time();
-	    my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($install_steps_interactive::com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
-            $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
-            #- add the elapsed time (otherwise the predicted time will be rubbish)
-            $start_time += time() - $time;
-            return $r;
-	}
-    };
-    my $install_result;
-    catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
-      sub {
-	  if ($@ =~ /^error ordering package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  } elsif ($@ =~ /^error installing package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  }
-	  0;
-      };
-    if ($pkgs::cancel_install) {
-	$pkgs::cancel_install = 0;
-	die 'already displayed';
-    }
-    $w->destroy;
-    $install_result;
-}
-
-sub set_help {
-    my ($o, @l) = @_;
-
-    my @l2 = map { 
-	join("\n\n", map { s/\n/ /mg; $_ } split("\n\n", translate($help::steps{$_})))
-    } @l;
-    $o->{current_help} = join("\n\n\n", @l2);
-    gtktext_insert($o->{help_window_text}, $o->{current_help});
-    1;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
deleted file mode 100644
index fec3d6502..000000000
--- a/perl-install/install_steps_interactive.pm
+++ /dev/null
@@ -1,1360 +0,0 @@
-package install_steps_interactive; # $Id$
-
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $new_bootstrap $com_license);
-
-@ISA = qw(install_steps);
-
-$com_license = _("
-Warning
-
-Please read carefully the terms below. If you disagree with any
-portion, you are not allowed to install the next CD media. Press 'Refuse' 
-to continue the installation without using these media.
-
-
-Some components contained in the next CD media are not governed
-by the GPL License or similar agreements. Each such component is then
-governed by the terms and conditions of its own specific license. 
-Please read carefully and comply with such specific licenses before 
-you use or redistribute the said components. 
-Such licenses will in general prevent the transfer,  duplication 
-(except for backup purposes), redistribution, reverse engineering, 
-de-assembly, de-compilation or modification of the component. 
-Any breach of agreement will immediately terminate your rights under 
-the specific license. Unless the specific license terms grant you such
-rights, you usually cannot install the programs on more than one
-system, or adapt it to be used on a network. In doubt, please contact 
-directly the distributor or editor of the component. 
-Transfer to third parties or copying of such components including the 
-documentation is usually forbidden.
-
-
-All rights to the components of the next CD media belong to their 
-respective authors and are protected by intellectual property and 
-copyright laws applicable to software programs.
-");
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use install_steps;
-use install_interactive;
-use install_any;
-use detect_devices;
-use run_program;
-use devices;
-use fsedit;
-use loopback;
-use mouse;
-use modules;
-use lang;
-use keyboard;
-use any;
-use fs;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub errorInStep($$) {
-    my ($o, $err) = @_;
-    $o->ask_warn(_("Error"), [ _("An error occurred"), formatError($err) ]);
-}
-
-sub kill_action {
-    my ($o) = @_;
-    $o->kill;
-}
-
-sub charsetChanged {}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($o) = @_;
-
-    $o->{lang} = any::selectLanguage($o, $o->{lang}, $o->{langs} ||= {})
-      || return $o->ask_yesorno('', _("Do you really want to leave the installation?")) ? $o->exit : &selectLanguage;
-    install_steps::selectLanguage($o);
-
-    $o->charsetChanged;
-
-    if ($o->isa('interactive_gtk')) {
-	$o->ask_warn('', formatAlaTeX(
-"If you see this message it is because you chose a language for
-which DrakX does not include a translation yet; however the fact
-that it is listed means there is some support for it anyway.
-
-That is, once GNU/Linux will be installed, you will be able to at
-least read and write in that language; and possibly more (various
-fonts, spell checkers, various programs translated etc. that
-varies from language to language).")) if $o->{lang} !~ /^en/ && !lang::load_mo();
-    } else {
-	#- don't use _( ) for this, as it is never translated
-	$o->ask_warn('', "The characters of your language can't be displayed in console,
-so the messages will be displayed in english during installation") if $ENV{LANGUAGE} eq 'C';
-    }
-}
-    
-sub acceptLicence {
-    my ($o) = @_;
-    return if $o->{useless_thing_accepted};
-
-    $o->set_help('license');
-    $o->{useless_thing_accepted} = $o->ask_from_list_(_("License agreement"), formatAlaTeX(
-_("Introduction
-
-The operating system and the different components available in the Mandrake Linux distribution 
-shall be called the \"Software Products\" hereafter. The Software Products include, but are not 
-restricted to, the set of programs, methods, rules and documentation related to the operating 
-system and the different components of the Mandrake Linux distribution.
-
-
-1. License Agreement
-
-Please read this document carefully. This document is a license agreement between you and  
-MandrakeSoft S.A. which applies to the Software Products.
-By installing, duplicating or using the Software Products in any manner, you explicitly 
-accept and fully agree to conform to the terms and conditions of this License. 
-If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
-the Software Products. 
-Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
-with the terms and conditions of this License is void and will terminate your rights under this 
-License. Upon termination of the License,  you must immediately destroy all copies of the 
-Software Products.
-
-
-2. Limited Warranty
-
-The Software Products and attached documentation are provided \"as is\", with no warranty, to the 
-extent permitted by law.
-MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
-incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
-business, interruption of business, financial loss, legal fees and penalties resulting from a court 
-judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
-Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such 
-damages.
-
-LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
-
-To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be 
-liable for any special, incidental, direct or indirect damages whatsoever (including without 
-limitation damages for loss of business, interruption of business, financial loss, legal fees 
-and penalties resulting from a court judgment, or any other consequential loss) arising out 
-of the possession and use of software components or arising out of  downloading software components 
-from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.
-This limited liability applies to, but is not restricted to, the strong cryptography components 
-included in the Software Products.
-
-
-3. The GPL License and Related Licenses
-
-The Software Products consist of components created by different persons or entities.  Most 
-of these components are governed under the terms and conditions of the GNU General Public 
-Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, 
-duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
-and conditions of the license agreement for each component before using any component. Any question 
-on a component license should be addressed to the component author and not to MandrakeSoft.
-The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written 
-by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for 
-further details.
-
-
-4. Intellectual Property Rights
-
-All rights to the components of the Software Products belong to their respective authors and are 
-protected by intellectual property and copyright laws applicable to software programs.
-MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
-parts, by all means and for all purposes.
-\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A.  
-
-
-5. Governing Laws 
-
-If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
-portion is excluded from this contract. You remain bound by the other applicable sections of the 
-agreement.
-The terms and conditions of this License are governed by the Laws of France.
-All disputes on the terms of this license will preferably be settled out of court. As a last 
-resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
-For any question on this document, please contact MandrakeSoft S.A.  
-")), [ __("Accept"), __("Refuse") ], "Refuse") eq "Accept" and return;
-
-    $o->ask_yesorno('', _("Are you sure you refuse the licence?"), 1) and $o->exit;
-
-    &acceptLicence;
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($o, $clicked) = @_;
-
-    my $l = keyboard::lang2keyboards(lang::langs($o->{langs}));
-
-    #- good guess, don't ask
-    return install_steps::selectKeyboard($o) 
-      if !$::expert && !$clicked && $l->[0][1] >= 90 && listlength(lang::langs($o->{langs})) == 1;
-
-    my @best = map { $_->[0] } @$l;
-    push @best, 'us_intl' if !member('us_intl', @best);
-
-    my $format = sub { translate(keyboard::keyboard2text($_[0])) };
-    my $other;
-    my $ext_keyboard = $o->{keyboard};
-    $o->ask_from_(
-	{ title => _("Keyboard"), 
-	  messages => _("Please choose your keyboard layout."),
-	  advanced_messages => _("Here is the full list of keyboards available"),
-	  advanced_label => _("More"),
-	  callbacks => { changed => sub { $other = $_[0]==1 } },
-	},
-	  [ if_(@best > 1, { val => \$o->{keyboard}, type => 'list', format => $format, sort => 1,
-	      list => [ @best ] }),
-	    { val => \$ext_keyboard, type => 'list', format => $format,
-	      list => [ difference2([ keyboard::keyboards ], \@best) ], advanced => @best > 1 }
-	  ]);
-    delete $o->{keyboard_unsafe};
-
-    $o->{keyboard} = $ext_keyboard if $other;
-    install_steps::selectKeyboard($o);
-}
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
-    my ($o, $verif, $l, $def, $l2, $def2) = @_;
-    $verif->($o->ask_from_list(_("Install Class"), _("Which installation class do you want?"), $l, $def) || die 'already displayed');
-
-    $::live ? 'Update' : $o->ask_from_list_(_("Install/Update"), _("Is this an install or an update?"), $l2, $def2);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($o, $clicked) = @_;
-
-    my %c = my @c = (
-      if_(!$::corporate,
-	_("Recommended") => "beginner",
-      ),
-      if_($o->{meta_class} ne 'desktop',
-	_("Expert")	 => "expert",
-      ),
-    );
-    %c = @c = (_("Expert") => "expert") if $::expert && !$clicked;
-
-    $o->set_help('selectInstallClassCorpo') if $::corporate;
-
-    my $verifInstallClass = sub { $::expert = $c{$_[0]} eq "expert" };
-    my $installMode = $o->{isUpgrade} ? $o->{keepConfiguration} ? __("Upgrade packages only") : __("Upgrade") : __("Install");
-
-    $installMode = $o->selectInstallClass1($verifInstallClass,
-					   first(list2kv(@c)), ${{reverse %c}}{$::expert ? "expert" : "beginner"},
-					   [ __("Install"), __("Upgrade"), __("Upgrade packages only") ], $installMode);
-
-    $o->{isUpgrade} = $installMode =~ /Upgrade/;
-    $o->{keepConfiguration} = $installMode =~ /packages only/;
-
-    install_steps::selectInstallClass($o);
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($o, $force) = @_;
-
-    $force ||= $o->{mouse}{unsafe} || $::expert;
-
-    my $prev = $o->{mouse}{type} . '|' . $o->{mouse}{name};
-    $o->{mouse} = mouse::fullname2mouse(
-	$o->ask_from_treelist_('', _("Please choose the type of your mouse."), 
-			       '|', [ mouse::fullnames ], $prev) || return) if $force;
-
-    if ($force && $o->{mouse}{type} eq 'serial') {
-	$o->set_help('selectSerialPort');
-	$o->{mouse}{device} = 
-	  $o->ask_from_listf(_("Mouse Port"),
-			    _("Please choose on which serial port your mouse is connected to."),
-			    \&mouse::serial_port2text,
-			    [ mouse::serial_ports ]) or return;
-    }
-    if (arch() =~ /ppc/ && $o->{mouse}{nbuttons} == 1) {
-	#- set a sane default F11/F12
-	$o->{mouse}{button2_key} = 87;
-	$o->{mouse}{button3_key} = 88;
-	$o->ask_from('', _("Buttons emulation"),
-		[
-		{ label => _("Button 2 Emulation"), val => \$o->{mouse}{button2_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
-		{ label => _("Button 3 Emulation"), val => \$o->{mouse}{button3_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
-		]) or return;
-    }
-    
-    if ($o->{mouse}{device} eq "usbmouse") {
-	any::load_category($o, 'bus/usb', !$::expert, 1, $o->{pcmcia});
-	eval { 
-	    devices::make("usbmouse");
-	    modules::load(qw(hid mousedev usbmouse));
-	};
-    }
-
-    $o->SUPER::selectMouse;
-    1;
-}
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($o, $clicked) = @_;
-
-    if (!$::noauto && arch() =~ /i.86/) {
-	if ($o->{pcmcia} ||= !$::testing && c::pcmcia_probe()) {
-	    my $w = $o->wait_message(_("PCMCIA"), _("Configuring PCMCIA cards..."));
-	    my $results = modules::configure_pcmcia($o->{pcmcia});
-	    $w = undef;
-	    $results and $o->ask_warn('', $results);
-	}
-    }
-    { 
-	my $w = $o->wait_message(_("IDE"), _("Configuring IDE"));
-	modules::load_category('disk/cdrom');
-    }
-    any::load_category($o, 'disk/scsi|hardware_raid', !$::expert && !$clicked, 0, $o->{pcmcia});
-
-    install_interactive::tellAboutProprietaryModules($o) if !$clicked;
-}
-
-sub ask_mntpoint_s {
-    my ($o, $fstab) = @_;
-    $o->set_help('ask_mntpoint_s');
-
-    my @fstab = grep { isTrueFS($_) } @$fstab;
-    @fstab = grep { isSwap($_) } @$fstab if @fstab == 0;
-    @fstab = @$fstab if @fstab == 0;
-    die _("No partition available") if @fstab == 0;
-
-    {
-	my $w = $o->wait_message('', _("Scanning partitions to find mount points"));
-	install_any::suggest_mount_points($fstab, $o->{prefix}, 'uniq');
-	log::l("default mntpoint $_->{mntpoint} $_->{device}") foreach @fstab;
-    }
-    if (@fstab == 1) {
-	$fstab[0]{mntpoint} = '/';
-    } else {
-	$o->ask_from('', 
-				  _("Choose the mount points"),
-				  [ map { { label => partition_table::description($_), 
-					    val => \$_->{mntpoint},
-					    not_edit => 0,
-					    list => [ '', fsedit::suggestions_mntpoint(fsedit::empty_all_hds()) ] }
-					} grep { !$_->{real_mntpoint} || common::usingRamdisk() } @fstab ]) or return;
-    }
-    $o->SUPER::ask_mntpoint_s($fstab);
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($o) = @_;
-
-    my $warned;
-    install_any::getHds($o, sub {
-	my ($err) = @_;
-	$warned = 1;
-	if ($o->ask_yesorno(_("Error"), 
-_("I can't read your partition table, it's too corrupted for me :(
-I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
-The other solution is to not allow DrakX to modify the partition table.
-(the error is %s)
-
-Do you agree to loose all the partitions?
-", $err))) {
-            0;
-        } else {
-            $o->{partitioning}{readonly} = 1;
-            1;
-        }
-    }) or $warned or $o->ask_warn('', 
-_("DiskDrake failed to read correctly the partition table.
-Continue at your own risk!"));
-
-    if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) { #- need to make bootstrap part if NewWorld machine - thx Pixel ;^)
-	if (defined $partition_table_mac::bootstrap_part) {
-	    #- don't do anything if we've got the bootstrap setup
-	    #- otherwise, go ahead and create one somewhere in the drive free space
-	} else {
-	    if (defined $partition_table_mac::freepart_start && $partition_table_mac::freepart_size >= 1) {	        
-		my ($hd) = $partition_table_mac::freepart_device;
-		log::l("creating bootstrap partition on drive /dev/$hd->{device}, block $partition_table_mac::freepart_start");
-		$partition_table_mac::bootstrap_part = $partition_table_mac::freepart_part;	
-		log::l("bootstrap now at $partition_table_mac::bootstrap_part");
-		fsedit::add($hd, { start => $partition_table_mac::freepart_start, size => 1 << 11, type => 0x401, mntpoint => '' }, $o->{all_hds}, { force => 1, primaryOrExtended => 'Primary' });
-		$new_bootstrap = 1;    
-	    } else {
-		$o->ask_warn('',_("No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"));
-	    }
-	}
-    }
-
-    if ($o->{isUpgrade}) {
-	# either one root is defined (and all is ok), or we take the first one we find
-	my $p = fsedit::get_root_($o->{fstab});
-        if (!$p) {
-            my @l = install_any::find_root_parts($o->{fstab}, $o->{prefix}) or die _("No root partition found to perform an upgrade");
-	    $p = $o->ask_from_listf(_("Root Partition"),
-			            _("What is the root partition (/) of your system?"),
-			            \&partition_table::description, \@l) or die "setstep exitInstall\n";
-        }
-	install_any::use_root_part($o->{all_hds}, $p, $o->{prefix});
-    } elsif ($::expert && $o->isa('interactive_gtk')) {
-        install_interactive::partition_with_diskdrake($o, $o->{all_hds});
-    } else {
-        install_interactive::partitionWizard($o);
-    }
-}
-
-#------------------------------------------------------------------------------
-sub rebootNeeded {
-    my ($o) = @_;
-    $o->ask_warn('', _("You need to reboot for the partition table modifications to take place"));
-
-    install_steps::rebootNeeded($o);
-}
-
-#------------------------------------------------------------------------------
-sub choosePartitionsToFormat {
-    my ($o, $fstab) = @_;
-
-    $o->SUPER::choosePartitionsToFormat($fstab);
-
-    my @l = grep { !$_->{isMounted} && $_->{mntpoint} && 
-		   (!isSwap($_) || $::expert) &&
-		   (!isFat($_) || $_->{notFormatted} || $::expert) &&
-		   (!isOtherAvailableFS($_) || $::expert || $_->{toFormat})
-	       } @$fstab;
-    $_->{toFormat} = 1 foreach grep { isSwap($_) && !$::expert } @$fstab;
-
-    return if @l == 0 || !$::expert && 0 == grep { ! $_->{toFormat} } @l;
-
-    #- keep it temporary until the guy has accepted
-    $_->{toFormatTmp} = $_->{toFormat} || $_->{toFormatUnsure} foreach @l;
-
-    $o->ask_from_(
-        { messages => _("Choose the partitions you want to format"),
-          advanced_messages => _("Check bad blocks?"),
-        },
-        [ map { 
-	    my $e = $_;
-	    ({
-	      text => partition_table::description($e), type => 'bool',
-	      val => \$e->{toFormatTmp}
-	     }, if_(!isLoopback($_) && !isThisFs("reiserfs", $_) && !isThisFs("xfs", $_) && !isThisFs("jfs", $_), {
-	      text => partition_table::description($e), type => 'bool', advanced => 1, 
-	      disabled => sub { !$e->{toFormatTmp} },
-	      val => \$e->{toFormatCheck}
-        })) } @l ]
-    ) or die 'already displayed';
-    #- ok now we can really set toFormat
-    foreach (@l) {
-	$_->{toFormat} = delete $_->{toFormatTmp};
-	$_->{isFormatted} = 0;
-    }
-}
-
-
-sub formatMountPartitions {
-    my ($o, $fstab) = @_;
-    my $w;
-    fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix}, sub {
-	my ($part) = @_;
-	$w ||= $o->wait_message('', _("Formatting partitions"));
-	$w->set(isLoopback($part) ?
-		_("Creating and formatting file %s", $part->{loopback_file}) :
-		_("Formatting partition %s", $part->{device}));
-    });
-    die _("Not enough swap space to fulfill installation, please add some") if availableMemory < 40 * 1024;
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Looking for available packages..."));
-    $o->SUPER::setPackages;
-}
-#------------------------------------------------------------------------------
-sub selectPackagesToUpgrade {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Finding packages to upgrade..."));
-    $o->SUPER::selectPackagesToUpgrade();
-}
-#------------------------------------------------------------------------------
-sub choosePackages {
-    my ($o, $packages, $compssUsers, $first_time) = @_;
-
-    #- this is done at the very beginning to take into account
-    #- selection of CD by user if using a cdrom.
-    $o->chooseCD($packages) if $o->{method} eq 'cdrom' && !$::oem;
-
-    my $availableC = install_steps::choosePackages(@_);
-    my $individual = $::expert;
-
-    require pkgs;
-
-    my $min_size = pkgs::selectedSize($packages);
-    $min_size < $availableC or die _("Your system does not have enough space left for installation or upgrade (%d > %d)", $min_size, $availableC);
-
-    my $min_mark = $::expert ? 3 : 4;
-    my $def_mark = 4; #-TODO: was 59, 59 is for packages that need gl hw acceleration.
-
-    my $b = pkgs::saveSelected($packages);
-    pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $def_mark, 0);
-    my $def_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
-    my $level = pkgs::setSelectedFromCompssList($packages, { map { $_ => 1 } map { @{$compssUsers->{$_}{flags}} } @{$o->{compssUsersSorted}} }, $min_mark, 0);
-    my $max_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
-    pkgs::restoreSelected($b);
-
-    $o->chooseGroups($packages, $compssUsers, $min_mark, \$individual, $max_size) if !$::corporate;
-
-    ($o->{packages_}{ind}) =
-      pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $min_mark, $availableC);
-
-    $o->choosePackagesTree($packages) if $individual;
-
-    install_any::warnAboutNaughtyServers($o);
-}
-
-sub chooseSizeToInstall {
-    my ($o, $packages, $min, $def, $max, $availableC) = @_;
-    min($def, $availableC * 0.7);
-}
-sub choosePackagesTree {
-    my ($o, $packages, $limit_to_medium) = @_;
-
-    $o->ask_many_from_list('', _("Choose the packages you want to install"),
-			   {
-			    list => [ grep { !$limit_to_medium || pkgs::packageMedium($packages, $_) == $limit_to_medium }
-				      map { pkgs::packageByName($packages, $_) }
-				      keys %{$packages->{names}} ],
-			    value => \&pkgs::packageFlagSelected,
-			    label => \&pkgs::packageName,
-			    sort => 1,
-			   });
-}
-sub loadSavePackagesOnFloppy {
-    my ($o, $packages) = @_;
-    my $choice = $o->ask_from_listf('', 
-_("Please choose load or save package selection on floppy.
-The format is the same as auto_install generated floppies."),
-				    sub { $_[0]{text} },
-				    [ { text => _("Load from floppy"), code => sub {
-					    while (1) {
-						my $w = $o->wait_message(_("Package selection"), _("Loading from floppy"));
-						log::l("load package selection from floppy");
-						my $O = eval { install_any::loadO({}, 'floppy') };
-						if ($@) {
-						    $w = undef; #- close wait message.
-						    $o->ask_okcancel('', _("Insert a floppy containing package selection"))
-						      or return;
-						} else {
-						    install_any::unselectMostPackages($o);
-						    foreach (@{$O->{default_packages} || []}) {
-							my $pkg = pkgs::packageByName($packages, $_);
-							pkgs::selectPackage($packages, $pkg) if $pkg;
-						    }
-						    return 1;
-						}
-					    }
-					} },
-				      { text => _("Save on floppy"), code => sub {
-					    log::l("save package selection to floppy");
-					    install_any::g_default_packages($o, 'quiet');
-					} },
-				      { text => _("Cancel") },
-				    ]);
-    $choice->{code} and $choice->{code}();
-}
-sub chooseGroups {
-    my ($o, $packages, $compssUsers, $min_level, $individual, $max_size) = @_;
-
-    my $b = pkgs::saveSelected($packages);
-    install_any::unselectMostPackages($o);
-    pkgs::setSelectedFromCompssList($packages, {}, $min_level, $max_size);
-    my $system_size = pkgs::selectedSize($packages);
-    my ($sizes, $pkgs) = pkgs::computeGroupSize($packages, $min_level);
-    pkgs::restoreSelected($b);
-    log::l("system_size: $system_size");
-
-    my @groups = @{$o->{compssUsersSorted}};
-    my %stable_flags = grep_each { $::b } %{$o->{compssUsersChoice}};
-    delete $stable_flags{$_} foreach map { @{$compssUsers->{$_}{flags}} } @groups;
-
-    my $compute_size = sub {
-	my %pkgs;
-	my %flags = %stable_flags; @flags{@_} = ();
-	my $total_size;
-	A: while (my ($k, $size) = each %$sizes) {
-	    Or: foreach (split "\t", $k) {
-		  foreach (split "&&") {
-		      exists $flags{$_} or next Or;
-		  }
-		  $total_size += $size;
-		  $pkgs{$_} = 1 foreach @{$pkgs->{$k}};
-		  next A;
-	      }
-	  }
-	log::l("computed size $total_size");
-	log::l("chooseGroups: ", join(" ", sort keys %pkgs));
-
-	int $total_size;
-    };
-    my %val = map {
-	$_ => ! grep { ! $o->{compssUsersChoice}{$_} } @{$compssUsers->{$_}{flags}}
-    } @groups;
-
-#    @groups = grep { $size{$_} = round_down($size{$_} / sqr(1024), 10) } @groups; #- don't display the empty or small one (eg: because all packages are below $min_level)
-    my ($all, $size);
-    my $available_size = install_any::getAvailableSpace($o) / sqr(1024);
-    my $size_to_display = sub { 
-	my $lsize = $system_size + $compute_size->(map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } @groups);
-
-	#- if a profile is deselected, deselect everything (easier than deselecting the profile packages)
-	$size > $lsize and install_any::unselectMostPackages($o);
-	$size = $lsize;
-	_("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available_size);
-    };
-
-    while (1) {
-	if ($available_size < 140) {
-	    # too small to choose anything. Defaulting to no group chosen
-	    $val{$_} = 0 foreach %val;
-	    last;
-	}
-
-	$o->reallyChooseGroups($size_to_display, $individual, \%val) or return;
-	last if pkgs::correctSize($size / sqr(1024)) < $available_size;
-       
-	$o->ask_warn('', _("Selected size is larger than available space"));	
-    }
-
-    $o->{compssUsersChoice}{$_} = 0 foreach map { @{$compssUsers->{$_}{flags}} } grep { !$val{$_} } keys %val;
-    $o->{compssUsersChoice}{$_} = 1 foreach map { @{$compssUsers->{$_}{flags}} } grep {  $val{$_} } keys %val;
-
-    log::l("compssUsersChoice: " . (!$val{$_} && "not ") . "selected [$_] as [$o->{compssUsers}{$_}{label}]") foreach keys %val;
-
-    #- if no group have been chosen, ask for using base system only, or no X, or normal.
-    unless ($o->{isUpgrade} || grep { $val{$_} } keys %val) {
-	my $docs = !$o->{excludedocs};	
-	my $minimal = !grep { $_ } values %{$o->{compssUsersChoice}};
-
-	$o->ask_from(_("Type of install"), 
-		     _("You haven't selected any group of packages.
-Please choose the minimal installation you want:"),
-		     [
-		      { val => \$o->{compssUsersChoice}{X}, type => 'bool', text => _("With X"), disabled => sub { $minimal } },
-		        if_($::expert || $minimal,
-		      { val => \$docs, type => 'bool', text => _("With basic documentation (recommended!)"), disabled => sub { $minimal } },
-		      { val => \$minimal, type => 'bool', text => _("Truly minimal install (especially no urpmi)") },
-			),
-		     ],
-		     changed => sub { $o->{compssUsersChoice}{X} = $docs = 0 if $minimal },
-	) or return &chooseGroups;
-
-	$o->{excludedocs} = !$docs || $minimal;
-
-	#- reselect according to user selection.
-	if ($minimal) {
-	    $o->{compssUsersChoice}{$_} = 0 foreach keys %{$o->{compssUsersChoice}};
-	} else {
-	    my $X = $o->{compssUsersChoice}{X}; #- don't let setDefaultPackages modify this one
-	    install_any::setDefaultPackages($o, 'clean');
-	    $o->{compssUsersChoice}{X} = $X;
-	}
-	install_any::unselectMostPackages($o);
-    }
-    1;
-}
-
-sub reallyChooseGroups {
-    my ($o, $size_to_display, $individual, $val) = @_;
-
-    my $size_text = &$size_to_display;
-
-    my ($path, $all);
-    $o->ask_from('', _("Package Group Selection"), [
-        { val => \$size_text, type => 'label' }, {},
-	 (map {; 
-	       my $old = $path;
-	       $path = $o->{compssUsers}{$_}{path};
-	       if_($old ne $path, { val => translate($path) }),
-		 {
-		  val => \$val->{$_},
-		  type => 'bool',
-		  disabled => sub { $all },
-		  text => translate($o->{compssUsers}{$_}{label}),
-		  help => translate($o->{compssUsers}{$_}{descr}),
-		 }
-	   } @{$o->{compssUsersSorted}}),
-	 if_($o->{meta_class} eq 'desktop', { text => _("All"), val => \$all, type => 'bool' }),
-	 if_($individual, { text => _("Individual package selection"), val => $individual, advanced => 1, type => 'bool' }),
-    ], changed => sub { $size_text = &$size_to_display }) or return;
-
-    if ($all) {
-	$val->{$_} = 1 foreach keys %$val;
-    }
-    1;    
-}
-
-sub chooseCD {
-    my ($o, $packages) = @_;
-    my @mediums = grep { $_ != $install_any::boot_medium } pkgs::allMediums($packages);
-    my @mediumsDescr = ();
-    my %mediumsDescr = ();
-
-    if (!common::usingRamdisk()) {
-	#- mono-cd in case of no ramdisk
-	foreach (@mediums) {
-	    pkgs::mediumDescr($packages, $install_any::boot_medium) eq pkgs::mediumDescr($packages, $_) and next;
-	    undef $packages->{mediums}{$_}{selected};
-	}
-	log::l("low memory install, using single CD installation (as it is not ejectable)");
-	return;
-    }
-
-    #- the boot medium is already selected.
-    $mediumsDescr{pkgs::mediumDescr($packages, $install_any::boot_medium)} = 1;
-
-    #- build mediumDescr according to mediums, this avoid asking multiple times
-    #- all the medium grouped together on only one CD.
-    foreach (@mediums) {
-	my $descr = pkgs::mediumDescr($packages, $_);
-	exists $mediumsDescr{$descr} or push @mediumsDescr, $descr;
-	$mediumsDescr{$descr} ||= $packages->{mediums}{$_}{selected};
-    }
-
-    #- if no other medium available or a poor beginner, we are choosing for him!
-    #- note first CD is always selected and should not be unselected!
-    return if @mediumsDescr == () || !$::expert;
-
-    $o->set_help('chooseCD');
-    $o->ask_many_from_list('',
-_("If you have all the CDs in the list below, click Ok.
-If you have none of those CDs, click Cancel.
-If only some CDs are missing, unselect them, then click Ok."),
-			   {
-			    list => \@mediumsDescr,
-			    label => sub { _("Cd-Rom labeled \"%s\"", $_[0]) },
-			    val => sub { \$mediumsDescr{$_[0]} },
-			   }) or do {
-			       $mediumsDescr{$_} = 0 foreach @mediumsDescr; #- force unselection of other CDs.
-			   };
-    $o->set_help('choosePackages');
-
-    #- restore true selection of medium (which may have been grouped together)
-    foreach (@mediums) {
-	my $descr = pkgs::mediumDescr($packages, $_);
-	$packages->{mediums}{$_}{selected} = $mediumsDescr{$descr};
-	log::l("select status of medium $_ is $packages->{mediums}{$_}{selected}");
-    }
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($o, $packages) = @_;
-    my ($current, $total) = 0;
-
-    my $w = $o->wait_message(_("Installing"), _("Preparing installation"));
-
-    my $old = \&pkgs::installCallback;
-    local *pkgs::installCallback = sub {
-	my $m = shift;
-	if ($m =~ /^Starting installation/) {
-	    $total = $_[1];
-	} elsif ($m =~ /^Starting installing package/) {
-	    my $name = $_[0];
-	    $w->set(_("Installing package %s\n%d%%", $name, $total && 100 * $current / $total));
-	    $current += pkgs::packageSize(pkgs::packageByName($o->{packages}, $name));
-	} else { unshift @_, $m; goto $old }
-    };
-
-    #- the modification is not local as the box should be living for other package installation.
-    #- BEWARE this is somewhat duplicated (but not exactly from gtk code).
-    undef *install_any::changeMedium;
-    *install_any::changeMedium = sub {
-	my ($method, $medium) = @_;
-
-	#- if not using a cdrom medium, always abort.
-	$method eq 'cdrom' && !$::oem and do {
-	    my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	    local $| = 1; print "\a";
-	    my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
-            $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
-            return $r;
-	};
-    };
-    my $install_result;
-    catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
-      sub {
-	  if ($@ =~ /^error ordering package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  } elsif ($@ =~ /^error installing package list: (.*)/) {
-	      $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  }
-	  0;
-      };
-    if ($pkgs::cancel_install) {
-	$pkgs::cancel_install = 0;
-	die "setstep choosePackages\n";
-    }
-    $install_result;
-}
-
-sub afterInstallPackages($) {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Post-install configuration"));
-    $o->SUPER::afterInstallPackages($o);
-}
-
-sub copyKernelFromFloppy {
-    my ($o) = @_;
-    $o->ask_okcancel('', _("Please insert the Boot floppy used in drive %s", $o->{blank}), 1) or return;
-    $o->SUPER::copyKernelFromFloppy();
-}
-
-sub updateModulesFromFloppy {
-    my ($o) = @_;
-    $o->ask_okcancel('', _("Please insert the Update Modules floppy in drive %s", $o->{updatemodules}), 1) or return;
-    $o->SUPER::updateModulesFromFloppy();
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($o, $first_time, $noauto) = @_;
-    require network::netconnect;
-    network::netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse}, $o, $o->{intf},
-			      $first_time, $o->{lang} eq "fr_FR" && $o->{keyboard} eq "fr", $noauto);
-}
-
-#-configureNetworkIntf moved to network
-
-#-configureNetworkNet moved to network
-#------------------------------------------------------------------------------
-#-pppConfig moved to any.pm
-#------------------------------------------------------------------------------
-sub installCrypto {
-    my $license =
-_("You now have the opportunity to download encryption software.
-
-WARNING:
-
-Due to different general requirements applicable to these software and imposed
-by various jurisdictions, customer and/or end user of theses software should
-ensure that the laws of his/their jurisdiction allow him/them to download, stock
-and/or use these software.
-
-In addition customer and/or end user shall particularly be aware to not infringe
-the laws of his/their jurisdiction. Should customer and/or end user not
-respect the provision of these applicable laws, he/they will incure serious
-sanctions.
-
-In no event shall Mandrakesoft nor its manufacturers and/or suppliers be liable
-for special, indirect or incidental damages whatsoever (including, but not
-limited to loss of profits, business interruption, loss of commercial data and
-other pecuniary losses, and eventual liabilities and indemnification to be paid
-pursuant to a court decision) arising out of use, possession, or the sole
-downloading of these software, to which customer and/or end user could
-eventually have access after having sign up the present agreement.
-
-
-For any queries relating to these agreement, please contact 
-Mandrakesoft, Inc.
-2400 N. Lincoln Avenue Suite 243
-Altadena California 91001
-USA");
-    goto &installUpdates; #- remove old code, keep this one ok though by transfering to installUpdates.
-}
-
-sub installUpdates {
-    my ($o) = @_;
-    my $u = $o->{updates} ||= {};
-    
-    $o->hasNetwork or return;
-
-    is_empty_hash_ref($u) and $o->ask_yesorno('', 
-formatAlaTeX(
-_("You now have the opportunity to download updated packages. These packages
-have been released after the distribution was released. They may
-contain security or bug fixes.
-
-To download these packages, you will need to have a working Internet 
-connection.
-
-Do you want to install the updates ?"))) || return;
-
-    #- bring all interface up for installing crypto packages.
-    install_interactive::upNetwork($o);
-
-    require crypto;
-    eval {
-	my @mirrors = do { my $w = $o->wait_message('',
-						    _("Contacting Mandrake Linux web site to get the list of available mirrors..."));
-			   crypto::mirrors() };
-	#- if no mirror have been found, use current time zone and propose among available.
-	$u->{mirror} ||= crypto::bestMirror($o->{timezone}{timezone});
-	$u->{mirror} = $o->ask_from_treelistf('', 
-					      _("Choose a mirror from which to get the packages"), 
-					      '|',
-					      \&crypto::mirror2text,
-					      \@mirrors,
-					      $u->{mirror});
-    };
-    return if $@ || !$u->{mirror};
-
-    my $update_medium = do {
-	my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages..."));
-	crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
-    };
-
-    if ($update_medium) {
-	if ($o->choosePackagesTree($o->{packages}, $update_medium)) {
-	    $o->pkg_install;
-	} else {
-	    #- make sure to not try to install the packages (which are automatically selected by getPackage above).
-	    #- this is possible by deselecting the medium (which can be re-selected above).
-	    delete $update_medium->{selected};
-	}
-	#- update urpmi even, because there is an hdlist available and everything is good,
-	#- this will allow user to update the medium but update his machine later.
-	$o->install_urpmi;
-    }
- 
-    #- stop interface using ppp only. FIXME REALLY TOCHECK isdn (costly network) ?
-    # FIXME damien install_interactive::downNetwork($o, 'pppOnly');
-}
-
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
-    my ($o, $clicked) = @_;
-
-    require timezone;
-    $o->{timezone}{timezone} = $o->ask_from_treelist('', _("Which is your timezone?"), '/', [ timezone::getTimeZones($::g_auto_install ? '' : $o->{prefix}) ], $o->{timezone}{timezone}) || return;
-    $o->set_help('configureTimezoneGMT');
-
-    my $ntp = to_bool($o->{timezone}{ntp});
-    $o->ask_from('', '', [
-	  { text => _("Hardware clock set to GMT"), val => \$o->{timezone}{UTC}, type => 'bool' },
-	  { text => _("Automatic time synchronization (using NTP)"), val => \$ntp, type => 'bool' },
-    ]) or goto &configureTimezone
-	    if $::expert || $clicked;
-    if ($ntp) {
-	my @servers = split("\n", $timezone::ntp_servers);
-
-	$o->ask_from('', '',
-	    [ { label => _("NTP Server"), val => \$o->{timezone}{ntp}, list => \@servers, not_edit => 0 } ]
-        ) or goto &configureTimezone;
-	$o->{timezone}{ntp} =~ s/.*\((.+)\)/$1/;
-    } else {
-	$o->{timezone}{ntp} = '';
-    }
-    install_steps::configureTimezone($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureServices { 
-    my ($o, $clicked) = @_;
-    require services;
-    $o->{services} = services::ask($o, $o->{prefix}) if $::expert || $clicked;
-    install_steps::configureServices($o);
-}
-
-sub summary {
-    my ($o, $first_time) = @_;
-    require pkgs;
-
-    if ($first_time) {
-	#- auto-detection
-	$o->configurePrinter(0) if !$::expert;
-	install_any::preConfigureTimezone($o);
-    }
-    my $mouse_name;
-    my $format_mouse = sub { $mouse_name = translate($o->{mouse}{type}) . ' ' . translate($o->{mouse}{name}) };
-    &$format_mouse;
-
-    #- format printer description in a better way
-    my $format_printers = sub {
-	my $printer = $o->{printer};
-	if (is_empty_hash_ref($printer->{configured})) {
-	    pkgs::packageFlagInstalled(pkgs::packageByName($o->{packages}, 'cups')) and return _("Remote CUPS server");
-	    return _("No printer");
-	}
-	my $entry;
-	foreach ($printer->{currentqueue},
-		 map { $_->{queuedata} } ($printer->{configured}{$printer->{DEFAULT}}, values %{$printer->{configured}})) {
-	    $_ && ($_->{make} || $_->{model}) and return "$_->{make} $_->{model}";
-	}
-	return _("Remote CUPS server"); #- fall back in case of something wrong.
-    };
-
-    my @sound_cards = (arch() =~ /ppc/ ? \&modules::load_category : \&modules::probe_category)->('multimedia/sound');
-
-    #- if no sound card are detected AND the user selected things needing a sound card,
-    #- propose a special case for ISA cards
-    my $isa_sound_card = 
-      !@sound_cards && ($o->{compssUsersChoice}{GAMES} || $o->{compssUsersChoice}{AUDIO}) &&
-	sub {
-	    if ($o->ask_yesorno('', _("Do you have an ISA sound card?"))) {
-		$o->do_pkgs->install('sndconfig');
-		$o->ask_warn('', _("Run \"sndconfig\" after installation to configure your sound card"));
-	    } else {
-		$o->ask_warn('', _("No sound card detected. Try \"harddrake\" after installation"));
-	    }
-	};
-
-    $o->ask_from_({
-		   messages => _("Summary"),
-		   cancel   => '',
-		  }, [
-{ label => _("Mouse"), val => \$mouse_name, clicked => sub { $o->selectMouse(1); mouse::write($o->{prefix}, $o->{mouse}); &$format_mouse } },
-{ label => _("Keyboard"), val => \$o->{keyboard}, clicked => sub { $o->selectKeyboard(1) }, format => sub { translate(keyboard::keyboard2text($_[0])) } },
-{ label => _("Timezone"), val => \$o->{timezone}{timezone}, clicked => sub { $o->configureTimezone(1) } },
-{ label => _("Printer"), val => \$o->{printer}, clicked => sub { $o->configurePrinter(1) }, format => $format_printers },
-    (map {
-{ label => _("ISDN card"), val => $_->{description}, clicked => sub { $o->configureNetwork } }
-     } grep { $_->{driver} eq 'hisax' } detect_devices::probeall()),
-    (map { 
-{ label => _("Sound card"), val => $_->{description} } 
-     } @sound_cards),
-    if_($isa_sound_card, { label => _("Sound card"), clicked => $isa_sound_card }), 
-    (map {
-{ label => _("TV card"), val => $_->{description}, clicked => sub { 
-      require harddrake::bttv; 
-      harddrake::bttv::config($o);
-} } } grep { $_->{driver} eq 'bttv' } detect_devices::probeall()),
-]);
-    install_steps::configureTimezone($o);  #- do not forget it.
-}
-
-#------------------------------------------------------------------------------
-sub configurePrinter {
-    my ($o, $clicked) = @_;
-    $::corporate && !$clicked and return;
-
-    require printer;
-    require printerdrake;
-
-    #- try to determine if a question should be asked to the user or
-    #- if he is autorized to configure multiple queues.
-    my $ask_multiple_printer = ($::expert || $clicked) && 2 || scalar(printerdrake::auto_detect($o));
-    $ask_multiple_printer-- or return;
-
-    #- install packages needed for printer::getinfo()
-    $::testing or $o->do_pkgs->install('foomatic');
-
-    #- take default configuration, this include choosing the right system
-    #- currently used by the system.
-    my $printer = $o->{printer} ||= {};
-    eval { add2hash($printer, printer::getinfo($o->{prefix})) };
-
-    $printer->{PAPERSIZE} = (($o->{lang} =~ /^en_US/) || 
-                             ($o->{lang} =~ /^en_CA/) || 
-                             ($o->{lang} =~ /^fr_CA/)) ? 'Letter' : 'A4';
-    printerdrake::main($printer, $o, $ask_multiple_printer, sub { install_interactive::upNetwork($o, 'pppAvoided') });
-
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($o, $clicked) = @_;
-    my $sup = $o->{superuser} ||= {};
-    my $auth = ($o->{authentication}{LDAP} && __("LDAP") ||
-		$o->{authentication}{NIS} && __("NIS") ||
-		__("Local files"));
-    $sup->{password2} ||= $sup->{password} ||= "";
-
-    return if $o->{security} < 1 && !$clicked;
-
-    $::isInstall and $o->set_help("setRootPassword", if_($::expert, "setRootPasswordAuth"));
-
-    $o->ask_from_(
-        {
-	 title => _("Set root password"), 
-	 messages => _("Set root password"),
-	 cancel => ($o->{security} <= 2 && !$::corporate ? _("No password") : ''),
-	 callbacks => { 
-	     complete => sub {
-		 $sup->{password} eq $sup->{password2} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,0);
-		 length $sup->{password} < 2 * $o->{security}
-		   and $o->ask_warn('', _("This password is too short (it must be at least %d characters long)", 2 * $o->{security})), return (1,0);
-		 return 0
-        } } }, [
-{ label => _("Password"), val => \$sup->{password},  hidden => 1 },
-{ label => _("Password (again)"), val => \$sup->{password2}, hidden => 1 },
-  if_($::expert,
-{ label => _("Authentication"), val => \$auth, list => [ __("Local files"), __("LDAP"), __("NIS") ], format => \&translate },
-  ),
-			 ]) or return;
-
-    if ($auth eq __("LDAP")) {
-	$o->{authentication}{LDAP} ||= "localhost"; #- any better solution ?
-	$o->{netc}{LDAPDOMAIN} ||= join (',', map { "dc=$_" } split /\./, $o->{netc}{DOMAINNAME});
-	$o->ask_from('',
-		     _("Authentication LDAP"),
-		     [ { label => _("LDAP Base dn"), val => \$o->{netc}{LDAPDOMAIN} },
-		       { label => _("LDAP Server"), val => \$o->{authentication}{LDAP} },
-		     ]) or goto &setRootPassword;
-    } else { $o->{authentication}{LDAP} = '' }
-    if ($auth eq __("NIS")) { 
-	$o->{authentication}{NIS} ||= 'broadcast';
-	$o->ask_from('',
-		     _("Authentication NIS"),
-		     [ { label => _("NIS Domain"), val => \ ($o->{netc}{NISDOMAIN} ||= $o->{netc}{DOMAINNAME}) },
-		       { label => _("NIS Server"), val => \$o->{authentication}{NIS}, list => ["broadcast"], not_edit => 0 },
-		     ]) or goto &setRootPassword;
-    } else { $o->{authentication}{NIS} = '' }
-    install_steps::setRootPassword($o);
-}
-
-#------------------------------------------------------------------------------
-#-addUser
-#------------------------------------------------------------------------------
-sub addUser {
-    my ($o, $clicked) = @_;
-    $o->{users} ||= [];
-
-    if ($o->{security} < 1) {
-	push @{$o->{users}}, { password => 'mandrake', realname => 'default', icon => 'automagic' } 
-	  if !member('mandrake', map { $_->{name} } @{$o->{users}});
-    }
-    if (($o->{security} >= 1 || $clicked)) {
-	any::ask_users($o->{prefix}, $o, $o->{users}, $o->{security});
-    }
-    any::get_autologin($o->{prefix}, $o);
-    any::autologin($o->{prefix}, $o, $o);
-
-    install_steps::addUser($o);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
-    my ($o, $first_time, $noauto) = @_;
-
-    return if !$noauto && $first_time && !$::expert;
-
-    if (arch() =~ /sparc/) {
-	#- as probing floppies is a bit more different on sparc, assume always /dev/fd0.
-	$o->ask_okcancel('',
-			 _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-SILO on your system, or another operating system removes SILO, or SILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures.
-
-If you want to create a bootdisk for your system, insert a floppy in the first
-drive and press \"Ok\"."),
-			 $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
-	my @l = detect_devices::floppies_dev();
-	$o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
-	$o->{mkbootdisk} or return;
-    } else {
-	my @l = detect_devices::floppies_dev();
-	my %l = (
-		 'fd0'  => _("First floppy drive"),
-		 'fd1'  => _("Second floppy drive"),
-		 'Skip' => _("Skip"),
-		 );
-
-	if ($first_time || @l == 1) {
-	    $o->ask_yesorno('', formatAlaTeX(
-			    _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures. Would you like to create a bootdisk for your system?
-%s", isThisFs('xfs', fsedit::get_root($o->{fstab})) ? _("
-
-(WARNING! You're using XFS for your root partition,
-creating a bootdisk on a 1.44 Mb floppy will probably fail,
-because XFS needs a very large driver).") : '')), 
-			    $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
-	    $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
-	} else {
-	    @l or die _("Sorry, no floppy drive available");
-
-	    $o->ask_from_(
-              {
-	       messages => _("Choose the floppy drive you want to use to make the bootdisk"),
-	      }, [ { val => \$o->{mkbootdisk}, list => \@l, format => sub { $l{$_[0]} || $_[0] } } ]
-            ) or return;
-        }
-        $o->ask_warn('', _("Insert a floppy in %s", $l{$o->{mkbootdisk}} || $o->{mkbootdisk}));
-    }
-
-    my $w = $o->wait_message('', _("Creating bootdisk..."));
-    install_steps::createBootdisk($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloaderBefore {
-    my ($o) = @_;
-    my $w = $o->wait_message('', _("Preparing bootloader..."));
-    $o->set_help('empty');
-    $o->SUPER::setupBootloaderBefore($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
-    my ($o, $more) = @_;
-    if (arch() =~ /ppc/) {
-	my $machtype = detect_devices::get_mac_generation();
-	if ($machtype !~ /NewWorld/) {
-	    $o->ask_warn('', _("You appear to have an OldWorld or Unknown\n machine, the yaboot bootloader will not work for you.\nThe install will continue, but you'll\n need to use BootX to boot your machine"));
-	    log::l("OldWorld or Unknown Machine - no yaboot setup");
-	    return;
-	}
-    }
-    if (arch() =~ /^alpha/) {
-	$o->ask_yesorno('', _("Do you want to use aboot?"), 1) or return;
-	catch_cdie { $o->SUPER::setupBootloader } sub {
-	    $o->ask_yesorno('', 
-_("Error installing aboot, 
-try to force installation even if that destroys the first partition?"));
-	};
-    } else {
-	any::setupBootloader($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}, $o->{prefix}, $more) or return;
-
-	{
-	    my $w = $o->wait_message('', _("Installing bootloader"));
-	    eval { $o->SUPER::setupBootloader };
-	}
-	if (my $err = $@) {
-	    $err =~ /failed$/ or die;
-	    $o->ask_warn('', 
-			 [ _("Installation of bootloader failed. The following error occured:"),
-			   grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
-	    unlink "$o->{prefix}/tmp/.error";
-	    die "already displayed";
-	} elsif (arch() =~ /ppc/) {
-	    my $of_boot = cat_("$o->{prefix}/tmp/of_boot_dev") || die "Can't open $o->{prefix}/tmp/of_boot_dev";
-	    chop($of_boot);
-	    unlink "$o->{prefix}/tmp/.error";
-	    $o->ask_warn('', _("You may need to change your Open Firmware boot-device to\n enable the bootloader.  If you don't see the bootloader prompt at\n reboot, hold down Command-Option-O-F at reboot and enter:\n setenv boot-device %s,\\\\:tbxi\n Then type: shut-down\nAt your next boot you should see the bootloader prompt.", $of_boot));
-	}
-    }
-}
-
-sub miscellaneous {
-    my ($o, $clicked) = @_;
-
-    if ($::expert) {
-	any::choose_security_level($o, \$o->{security}, \$o->{libsafe}) or return;
-    }
-    install_steps::miscellaneous($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureX {
-    my ($o, $clicked) = @_;
-    $o->configureXBefore;
-
-    #- strange, xfs must not be started twice...
-    #- trying to stop and restart it does nothing good too...
-    my $xfs_started if 0;
-    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/xfs", "start") unless $::live || $xfs_started;
-    $xfs_started = 1;
-
-    require Xconfigurator;
-    { local $::testing = 0; #- unset testing
-      local $::auto = !$::expert && !$clicked;
-
-      symlink "$o->{prefix}/etc/gtk", "/etc/gtk";
-      Xconfigurator::main($o->{prefix}, $o->{X}, $o, $o->do_pkgs,
-			  { allowFB          => $o->{allowFB},
-			    allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
-			  });
-    }
-    $o->configureXAfter;
-}
-
-#------------------------------------------------------------------------------
-sub generateAutoInstFloppy {
-    my ($o, $replay) = @_;
-
-    my $floppy = detect_devices::floppy();
-
-    $o->ask_okcancel('', _("Insert a blank floppy in drive %s", $floppy), 1) or return;
-
-    my $dev = devices::make($floppy);
-    {
-	my $w = $o->wait_message('', _("Creating auto install floppy..."));
-	install_any::getAndSaveAutoInstallFloppy($o, $replay, $dev) or return;
-    }
-    common::sync();         #- if you shall remove the floppy right after the LED switches off
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall {
-    my ($o, $alldone) = @_;
-
-    return $o->{step} = '' unless $alldone || $o->ask_yesorno('', 
-_("Some steps are not completed.
-
-Do you really want to quit now?"), 0);
-
-    install_steps::exitInstall($o);
-
-    $o->exit unless $alldone;
-
-    $o->ask_from_no_check(
-	{
-	 messages => formatAlaTeX(
-_("Congratulations, installation is complete.
-Remove the boot media and press return to reboot.
-
-
-For information on fixes which are available for this release of Mandrake Linux,
-consult the Errata available from:
-
-
-http://www.linux-mandrake.com/en/82errata.php3
-
-
-Information on configuring your system is available in the post
-install chapter of the Official Mandrake Linux User's Guide.")),
-	 cancel => '',
-	},      
-	[
-	 if_($::expert,
-	     { val => \ (my $t1 = _("Generate auto install floppy")), clicked => sub {
-		   my $t = $o->ask_from_list_('', 
-_("The auto install can be fully automated if wanted,
-in that case it will take over the hard drive!!
-(this is meant for installing on another box).
-
-You may prefer to replay the installation.
-"), [ __("Replay"), __("Automated") ]);
-		   $t and $o->generateAutoInstFloppy($t eq 'Replay');
-	       }, advanced => 1 },
-	     { val => \ (my $t2 = _("Save packages selection")), clicked => sub { install_any::g_default_packages($o) }, advanced => 1 },
-	 ),
-	]
-	) if $alldone && !$::g_auto_install;
-}
-
-
-#-######################################################################################
-#- Misc Steps Functions
-#-######################################################################################
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_steps_newt.pm b/perl-install/install_steps_newt.pm
deleted file mode 100644
index 2292094b0..000000000
--- a/perl-install/install_steps_newt.pm
+++ /dev/null
@@ -1,61 +0,0 @@
-package install_steps_newt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_newt);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive_newt;
-use install_any;
-use devices;
-use lang;
-use common;
-
-my $banner = __();
-
-sub banner {
-    my $banner = translate(__("Mandrake Linux Installation %s"));
-    my $l = first(Newt::GetScreenSize) - length($banner) - length($_[0]) + 1;
-    Newt::DrawRootText(0, 0, sprintf($banner, ' ' x $l . $_[0]));
-    Newt::Refresh;
-}
-
-sub new($$) {
-    my ($type, $o) = @_;
-
-    interactive_newt->new;
-
-    banner('');
-    Newt::PushHelpLine(_("  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "));
-
-    (bless {}, ref $type || $type)->SUPER::new($o);
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    $o->SUPER::enteringStep($step);
-    banner(translate($o->{steps}{$step}{text}));
-}
-
-sub exitInstall { 
-    &install_steps_interactive::exitInstall;
-    interactive_newt::end;
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o) = @_;
-    $o->SUPER::selectLanguage;
-    lang::load_console_font($o->{lang});
-}
-
-
-1;
-
diff --git a/perl-install/install_steps_stdio.pm b/perl-install/install_steps_stdio.pm
deleted file mode 100644
index 518640d29..000000000
--- a/perl-install/install_steps_stdio.pm
+++ /dev/null
@@ -1,40 +0,0 @@
-package install_steps_stdio; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_stdio);
-
-use common;
-use interactive_stdio;
-use install_steps_interactive;
-use lang;
-
-sub new($$) {
-    my ($type, $o) = @_;
-
-    (bless {}, ref $type || $type)->SUPER::new($o);
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    print _("Entering step `%s'\n", translate($o->{steps}{$step}{text}));
-    $o->SUPER::enteringStep($step);
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    $o->SUPER::leavingStep($step);
-    print "--------\n";
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o, $first_time) = @_;
-    $o->SUPER::selectLanguage($first_time);
-    lang::load_console_font($o->{lang});
-}
-
-1;
diff --git a/perl-install/interactive.pm b/perl-install/interactive.pm
deleted file mode 100644
index b22e703a9..000000000
--- a/perl-install/interactive.pm
+++ /dev/null
@@ -1,400 +0,0 @@
-package interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::Func;
-use common;
-
-#- minimal example using interactive:
-#
-#- > use lib qw(/usr/lib/libDrakX);
-#- > use interactive;
-#- > my $in = interactive->vnew;
-#- > $in->ask_okcancel('title', 'question');
-#- > $in->exit;
-
-#- ask_from_entries takes:
-#-  val      => reference to the value
-#-  label    => description
-#-  icon     => icon to put before the description
-#-  help     => tooltip
-#-  advanced => wether it is shown in by default or only in advanced mode
-#-  disabled => function returning wether it should be disabled (grayed)
-#-  gtk      => gtk preferences
-#-  type     => 
-#-     button => (with clicked or clicked_may_quit)
-#-               (type defaults to button if clicked or clicked_may_quit is there)
-#-               (val need not be a reference) (if clicked_may_quit return true, it's as if "Ok" was pressed)
-#-     label => (val need not be a reference) (type defaults to label if val is not a reference) 
-#-     bool (with text)
-#-     range (with min, max)
-#-     combo (with list, not_edit, format)
-#-     list (with list, icon2f (aka icon), separator (aka tree), format (aka pre_format function),
-#-           help can be a hash or a function,
-#-           tree_expanded boolean telling wether the tree should be wide open by default
-#-           quit_if_double_click boolean
-#-           allow_empty_list disables the special cases for 0 and 1 element lists)
-#-     entry (the default) (with hidden)
-#
-#- heritate from this class and you'll get all made interactivity for same steps.
-#- for this you need to provide
-#- - ask_from_listW(o, title, messages, arrayref, default) returns one string of arrayref
-#-
-#- where
-#- - o is the object
-#- - title is a string
-#- - messages is an refarray of strings
-#- - default is an optional string (default is in arrayref)
-#- - arrayref is an arrayref of strings
-#- - arrayref2 contains booleans telling the default state,
-#-
-#- ask_from_list and ask_from_list_ are wrappers around ask_from_biglist and ask_from_smalllist
-#-
-#- ask_from_list_ just translate arrayref before calling ask_from_list and untranslate the result
-#-
-#- ask_from_listW should handle differently small lists and big ones.
-#-
-
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($) {
-    my ($type) = @_;
-
-    bless {}, ref $type || $type;
-}
-
-sub vnew {
-    my ($type, $su, $icon) = @_;
-    $su = $su eq "su";
-    if ($ENV{INTERACTIVE_HTTP}) {
-	require interactive_http;
-	return interactive_http->new;
-    }
-    require c;
-    if ($su) {
-	$ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-	$su = '' if $::testing;
-    }
-    if ($ENV{DISPLAY} && system('/usr/X11R6/bin/xtest') == 0) {
-	if ($su && $>) {
-	    if (`/sbin/pidof "kdeinit: kwin"` > 0) {
-		exec("kdesu", "-c", "$0 @ARGV") or die _("kdesu missing");
-	    } else {
-		exec {'consolehelper'} $0, @ARGV or die _("consolehelper missing");
-	    }
-	}
-	eval { require interactive_gtk };
-	if (!$@) {
-	    my $o = interactive_gtk->new;
-	    if ($icon && $icon ne 'default' && !$::isWizard) { $o->{icon} = $icon } else { undef $o->{icon} }
-	    return $o;
-	}
-    } else {
-	if ($su && $>) {
-	    exec {'consolehelper'} $0, @ARGV or die _("consolehelper missing");
-	}
-    }
-
-    if ($su && $>) {
-	die "you must be root to run this program";
-    }
-    require 'log.pm';
-    undef *log::l;
-    *log::l = sub {}; # otherwise, it will bother us :(
-    require interactive_newt;
-    interactive_newt->new;
-}
-
-sub enter_console {}
-sub leave_console {}
-sub suspend {}
-sub resume {}
-sub end {}
-sub exit { exit($_[0]) }
-
-#-######################################################################################
-#- Interactive functions
-#-######################################################################################
-sub ask_warn {
-    my ($o, $title, $message) = @_;
-    local $::isWizard=0;
-    ask_from_listf_no_check($o, $title, $message, undef, [ _("Ok") ]);
-}
-
-sub ask_yesorno {
-    my ($o, $title, $message, $def, $help) = @_;
-    ask_from_list_($o, $title, $message, [ __("Yes"), __("No") ], $def ? "Yes" : "No", $help) eq "Yes";
-}
-
-sub ask_okcancel {
-    my ($o, $title, $message, $def, $help) = @_;
-
-    if ($::isWizard) {
-	$::no_separator = 1;
-    	$o->ask_from_no_check({ title => $title, messages => $message, focus_cancel => !$def });
-    } else {
-	ask_from_list_($o, $title, $message, [ __("Ok"), __("Cancel") ], $def ? "Ok" : "Cancel", $help) eq "Ok";
-    }
-}
-
-sub ask_file {
-    my ($o, $title, $dir) = @_;
-    $o->ask_fileW($title, $dir);
-}
-sub ask_fileW {
-    my ($o, $title, $dir) = @_;
-    $o->ask_from_entry($title, _("Choose a file"));
-}
-
-sub ask_from_list {
-    my ($o, $title, $message, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, undef, $l, $def, $help);
-}
-
-sub ask_from_list_ {
-    my ($o, $title, $message, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, sub { translate($_[0]) }, $l, $def, $help);
-}
-
-sub ask_from_listf_ {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-    ask_from_listf($o, $title, $message, sub { translate($f->(@_)) }, $l, $def, $help);
-}
-sub ask_from_listf {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-    @$l == 0 and die "ask_from_list: empty list\n" . common::backtrace();
-    @$l == 1 and return $l->[0];
-    goto &ask_from_listf_no_check;
-}
-
-sub ask_from_listf_no_check {
-    my ($o, $title, $message, $f, $l, $def, $help) = @_;
-
-    if (@$l <= 2 && !$::isWizard) {
-	my $ret = eval {
-	    ask_from_no_check($o, 
-	      { title => $title, messages => $message, ok => $l->[0] && may_apply($f, $l->[0]), 
-		if_($l->[1], cancel => may_apply($f, $l->[1]), focus_cancel => $def eq $l->[1]) }, []
-            ) ? $l->[0] : $l->[1];
-	};
-	die if $@ && $@ !~ /^wizcancel/;
-	$@ ? undef : $ret;
-    } else {
-	ask_from($o, $title, $message, [ { val => \$def, type => 'list', list => $l, help => $help, format => $f } ]) && $def;
-    }
-}
-
-sub ask_from_treelist {
-    my ($o, $title, $message, $separator, $l, $def) = @_;
-    ask_from_treelistf($o, $title, $message, $separator, undef, $l, $def);
-}
-sub ask_from_treelist_ {
-    my ($o, $title, $message, $separator, $l, $def) = @_;
-    my $transl = sub { join '|', map { translate($_) } split(quotemeta($separator), $_[0]) }; 
-    ask_from_treelistf($o, $title, $message, $separator, $transl, $l, $def);
-}
-sub ask_from_treelistf {
-    my ($o, $title, $message, $separator, $f, $l, $def) = @_;
-    ask_from($o, $title, $message, [ { val => \$def, separator => $separator, list => $l, format => $f, sort => 1 } ]) or return;
-    $def;
-}
-
-sub ask_many_from_list {
-    my ($o, $title, $message, @l) = @_;
-    @l = grep { @{$_->{list}} } @l or return '';
-    foreach my $h (@l) {
-	$h->{e}{$_} = {
-	    text => may_apply($h->{label}, $_),
-	    val => $h->{val} ? $h->{val}->($_) : do {
-		my $i =
-		  $h->{value} ? $h->{value}->($_) : 
-		    $h->{values} ? member($_, @{$h->{values}}) : 0;
-		\$i;
-	    },
-	    type => 'bool',
-	    help => may_apply($h->{help}, $_, ''),
-	    icon => may_apply($h->{icon2f}, $_, ''),
-	} foreach @{$h->{list}};
-	if ($h->{sort}) {
-	    $h->{list} = [ sort { $h->{e}{$a}{text} cmp $h->{e}{$b}{text} } @{$h->{list}} ];
-	}
-    }
-    $o->ask_from($title, $message, [ map { my $h = $_; map { $h->{e}{$_} } @{$h->{list}} } @l ]) or return;
-
-    @l = map {
-	my $h = $_;
-	[ grep { ${$h->{e}{$_}{val}} } @{$h->{list}} ];
-    } @l;
-    wantarray ? @l : $l[0];
-}
-
-sub ask_from_entry {
-    my ($o, $title, $message, %callback) = @_;
-    first(ask_from_entries($o, $title, $message, [''], %callback));
-}
-sub ask_from_entries {
-    my ($o, $title, $message, $l, %callback) = @_;
-
-    my @l = map { my $i = ''; { label => $_, val => \$i } } @$l;
-
-    $o->ask_from($title, $message, \@l, %callback) ?
-      map { ${$_->{val}} } @l :
-      undef;
-}
-
-#- can get a hash of callback: focus_out changed and complete
-#- moreove if you pass a hash with a field list -> combo
-#- if you pass a hash with a field hidden -> emulate stty -echo
-sub ask_from {
-    my ($o, $title, $message, $l, %callback) = @_;
-    ask_from_($o, { title => $title, messages => $message, callbacks => \%callback }, $l);
-}
-
-
-sub ask_from_normalize {
-    my ($o, $common, $l) = @_;
-
-    foreach my $e (@$l) {
-	if (my $li = $e->{list}) {
-	    if ($e->{sort} || @$li > 10 && !exists $e->{sort}) {
-		my @l2 = map { may_apply($e->{format}, $_) } @$li;
-		my @places = sort { $l2[$a] cmp $l2[$b] } 0 .. $#l2;
-		$e->{list} = $li = [ map { $li->[$_] } @places ];
-	    }
-	    $e->{type} = 'iconlist' if $e->{icon2f};
-	    $e->{type} = 'treelist' if $e->{separator};
-	    add2hash_($e, { not_edit => 1 });
-	    $e->{type} ||= 'combo';
-	    ${$e->{val}} = $li->[0] if ($e->{type} ne 'combo' || $e->{not_edit}) && !member(${$e->{val}}, @$li);
-	    if ($e->{type} eq 'combo' && $e->{format}) {
-		my @l = map { $e->{format}->($_) } @{$e->{list}};
-		delete $e->{format};
-		each_index {
-		    ${$e->{val}} = $l[$::i] if $_ eq ${$e->{val}};
-		} @{$e->{list}};
-		($e->{list}, $e->{saved_list}) = (\@l, $e->{list});
-	    }
-	} elsif ($e->{type} eq 'range') {
-	    $e->{min} <= $e->{max} or die "bad range min $e->{min} > max $e->{max} (called from " . join(':', caller()) . ")";
-	    ${$e->{val}} = max($e->{min}, min(${$e->{val}}, $e->{max}));
-	} elsif ($e->{type} eq 'button' || $e->{clicked} || $e->{clicked_may_quit}) {
-	    $e->{type} = 'button';
-	    $e->{clicked_may_quit} ||= $e->{clicked} ? sub { $e->{clicked}(); 0 } : sub {};	    
-	    $e->{val} = \ (my $v = $e->{val}) if !ref($e->{val});
-	} elsif ($e->{type} eq 'label' || !ref($e->{val})) {
-	    $e->{type} = 'label';
-	    $e->{val} = \ (my $v = $e->{val}) if !ref($e->{val});
-	} else {
-	    $e->{type} ||= 'entry';
-	}
-	$e->{disabled} ||= sub { 0 };
-    }
-
-    #- don't display empty lists and one element lists
-    @$l = grep { 
-	if ($_->{list} && $_->{not_edit} && !$_->{allow_empty_list}) {
-	    if (@{$_->{list}} == ()) {
-		eval {
-		    require log;
-		    log::l("ask_from_normalize: empty list for $_->{label}\n" . common::backtrace());
-		};
-	    }
-	    @{$_->{list}} > 1;
-	} else {
-	    1;
-	}
-    } @$l;
-
-    $common->{advanced_label} ||= _("Advanced");
-    $common->{advanced_label_close} ||= _("Basic");
-    $common->{$_} = [ deref($common->{$_}) ] foreach qw(messages advanced_messages);
-    add2hash_($common, { ok => _("Ok"), cancel => _("Cancel") }) if !exists $common->{ok} && !$::isWizard;
-    add2hash_($common->{callbacks} ||= {}, { changed => sub {}, focus_out => sub {}, complete => sub { 0 }, canceled => sub { 0 } });
-}
-
-sub ask_from_ {
-    my ($o, $common, $l) = @_;
-    ask_from_normalize($o, $common, $l);
-    @$l or return 1;
-    ask_from_real($o, $common, $l);
-}
-sub ask_from_no_check {
-    my ($o, $common, $l) = @_;
-    ask_from_normalize($o, $common, $l);
-    $o->ask_fromW($common, [ grep { !$_->{advanced} } @$l ], [ grep { $_->{advanced} } @$l ]);
-}
-sub ask_from_real {
-    my ($o, $common, $l) = @_;
-    my $v = $o->ask_fromW($common, [ grep { !$_->{advanced} } @$l ], [ grep { $_->{advanced} } @$l ]);
-    %$common = ();
-    foreach my $e (@$l) {
-	my $l = delete $e->{saved_list} or next;
-	each_index {
-	    ${$e->{val}} = $l->[$::i] if $_ eq ${$e->{val}};
-	} @{$e->{list}};
-	$e->{list} = $l;
-    }
-    $v;
-}
-
-
-sub ask_browse_tree_info {
-    my ($o, $title, $message, $common) = @_;
-    add2hash_($common, { ok => _("Ok"), cancel => _("Cancel") });
-    add2hash_($common, { title => $title, message => $message });
-    add2hash_($common, { grep_allowed_to_toggle      => sub { @_ },
-			 grep_unselected             => sub { grep { $common->{node_state}($_) eq 'unselected' } @_ },
-			 check_interactive_to_toggle => sub { 1 },
-			 toggle_nodes                => sub {
-			     my ($set_state, @nodes) = @_;
-			     my $new_state = !$common->{grep_unselected}($nodes[0]) ? 'selected' : 'unselected';
-			     $set_state->($_, $new_state) foreach @nodes;
-			 },
-		       });
-    $o->ask_browse_tree_info_refW($common);
-}
-sub ask_browse_tree_info_refW { #- default definition, do not use with too many items (memory consuming)
-    my ($o, $common) = @_;
-    my ($l, $v, $h) = ([], [], {});
-    $common->{build_tree}(sub {
-			      my ($node) = $common->{grep_allowed_to_toggle}(@_);
-			      if (my $state = $node && $common->{node_state}($node)) {
-				  push @$l, $node;
-				  $state eq 'selected' and push @$v, $node;
-				  $h->{$node} = $state eq 'selected';
-			      }
-			  }, 'flat');
-    add2hash_($common, { list   => $l, #- TODO interactivity of toggle is missing
-			 values => $v,
-			 help   => sub { $common->{get_info}($_[0]) },
-		       });
-    my ($new_v) = $o->ask_many_from_list($common->{title}, $common->{message}, $common) or return;
-    $common->{toggle_nodes}(sub {}, grep { ! delete $h->{$_} } @$new_v);
-    $common->{toggle_nodes}(sub {}, grep { $h->{$_} } keys %$h);
-    1;
-}
-
-sub wait_message {
-    my ($o, $title, $message, $temp) = @_;
-
-    my $w = $o->wait_messageW($title, [ _("Please wait"), deref($message) ]);
-    push @tempory::objects, $w if $temp;
-    my $b = before_leaving { $o->wait_message_endW($w) };
-
-    #- enable access through set
-    MDK::Common::Func::add_f4before_leaving(sub { $o->wait_message_nextW([ deref($_[1]) ], $w) }, $b, 'set');
-    $b;
-}
-
-sub kill {}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/keyboard.pm b/perl-install/keyboard.pm
deleted file mode 100644
index fe2e0f3b0..000000000
--- a/perl-install/keyboard.pm
+++ /dev/null
@@ -1,542 +0,0 @@
-
-package keyboard; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use run_program;
-use log;
-use c;
-
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-my $KMAP_MAGIC = 0x8B39C07F;
-
-#- a best guess of the keyboard layout, based on the choosen locale
-#- beware only the first 5 characters of the locale are used
-my %lang2keyboard =
-(
-  'af' => 'us_intl',
-#-'ar' => 'ar:80 ar_d:70 ar_azerty:60 ar_azerty_d:50',
-  'az' => 'az:80 tr:10 us_intl:5',
-'az_AZ'=> 'az:80 tr:10 us_intl:5',
-  'be' => 'by:80 ru:50 ru_yawerty:40',
-'be_BE'=> 'by:80 ru:50 ru_yawerty:40',
-  'bg' => 'bg_phonetic:60 bg:50',
-'bg_BG'=> 'bg_phonetic:60 bg:50',
-  'br' => 'fr:90',
-  'bs' => 'hr:60 yu:50 si:40',
-  'ca' => 'es:89 fr:15',
-'ca_Es'=> 'es:89 fr:15',
-  'cs' => 'cz_qwerty:70 cz:50',
-  'cy' => 'uk:90',
-'cy_GB'=> 'uk:90',
-  'da' => 'dk:90',
-  'de' => 'de_nodeadkeys:70 de:50',
-'de_AT'=> 'de_nodeadkeys:70 de:50',
-'de_BE'=> 'be:70 de_nodeadkeys:60 de:50',
-'de_CH'=> 'ch_de:70 ch_fr:25 de_nodeadkeys:20 de:15',
-'de_DE'=> 'de_nodeadkeys:70 de:50', 
-'de_LU'=> 'de_nodeadkeys:70 de:50 fr:40 be:35', 
-  'el' => 'gr:90',
-'el_GR'=> 'gr:90',
-  'en' => 'us:90 us_intl:50',
-'en_US'=> 'us:90 us_intl:50',
-'en_GB'=> 'uk:89 us:60 us_intl:50',
-'en_IE'=> 'uk:89 us:60 us_intl:50',
-  'eo' => 'us_intl:89 dvorak:20',
-'eo_XX'=> 'us_intl:89 dvorak:20',
-  'es' => 'es:85 la:80 us_intl:50',
-'es@tr'=> 'es:85 la:80 us_intl:50',
-'es_AR'=> 'la:80 us_intl:50 es:20',
-'es_ES'=> 'es:90',
-'es_MX'=> 'la:80 us_intl:50 es:20',
-  'et' => 'ee:90',
-  'eu' => 'es:89 fr:15',
-'eu_ES'=> 'es:89 fr:15',
-  'fa' => 'ir:90',
-  'fi' => 'fi:90',
-  'fr' => 'fr:90',
-'fr_BE'=> 'be:85 fr:5',
-'fr_CA'=> 'qc:85 fr:5',
-'fr_CH'=> 'ch_fr:70 ch_de:15 fr:10',
-'fr_FR'=> 'fr:90',
-'fr_LU'=> 'fr:70 de_nodeadkeys:50 de:40 be:35', 
-  'ga' => 'uk:90',
-'ga_IE'=> 'uk:90',
-  'gd' => 'uk:90',
-  'gl' => 'es:90',
-'gl_ES'=> 'es:90',
-  'gv' => 'uk:90',
-  'he' => 'il:89 il_phonetic:10',
-'he_IL'=> 'il:89 il_phonetic:10',
-  'hr' => 'hr:80 si:50',
-  'hu' => 'hu:90',
-  'hy' => 'am:80 am_old:10 am_phonetic:5',
-'hy_AM'=> 'am:80 am_old:10 am_phonetic:5',
-  'id' => 'us:90 us_intl:20',
-  'is' => 'is:90',
-  'iu' => 'iu:90',
-  'it' => 'it:90',
-'it_CH'=> 'ch_fr:80 ch_de:60 it:50',
-'it_IT'=> 'it:90',
-  'ja' => 'jp:80 us:50 us_intl:20',
-'ja_JP'=> 'jp:80 us:50 us_intl:20',
-  'ka' => 'ge_la:80 ge_ru:50',
-'ka_GE'=> 'ge_la:80 ge_ru:50',
-  'kl' => 'dk:80 us_intl:30',
-  'ko' => 'kr:80 us:60',
-'ko_KR'=> 'kr:80 us:60',
-  'kw' => 'uk:90',
-  'lo' => 'us:60',
-  'lt' => 'lt:80 lt_new:70 lt_b:60 lt_p:50',
-  'lv' => 'lv:80 lt:40 lt_new:30 lt_b:20 lt_p:10 ee:5',
-  'mi' => 'us_intl:60 uk:20 us:10',
-'mk_MK'=> 'mk:80',
-  'mk' => 'mk:80',
-  'ms' => 'us:90 us_intl:20',
-  'nb' => 'no:85 dvorak_no:10',
-'nl_BE'=> 'be:80 nl:10 us_intl:5',
-'nl_NL'=> 'us_intl:80 nl:15 us:10 uk:5',
-  'nn' => 'no:85 dvorak_no:10',
-  'no' => 'no:85 dvorak_no:10',
-  'oc' => 'fr:90',
-  'ph' => 'us:90 us_intl:20',
-  'pl' => 'pl:80 pl2:60',
-  'pp' => 'br:80 la:20 pt:10 us_intl:30',
-'pt_BR'=> 'br:80 la:20 pt:10 us_intl:30',
-'pt_PT'=> 'pt:80',
-  'ro' => 'ro2:80 ro:40 us_intl:10',
-  'ru' => 'ru:85 ru_yawerty:80',
-'ru_RU'=> 'ru:85 ru_yawerty:80',
-'ru_UA'=> 'ua:50 ru:40 ru_yawerty:30',
-  'sk' => 'sk_qwerty:80 sk:70',
-  'sl' => 'si:80 hr:50',
-  'sp' => 'sr:80',
-'sp_YU'=> 'sr:80',
-  'sq' => 'al:80',
-  'sr' => 'yu:80',
-'sr_YU'=> 'yu:80',
-  'sv' => 'se:85 fi:30 dvorak_se:10',
-'sv_FI'=> 'fi:85 sv:20',
-'sv_SE'=> 'se:85 fi:20',
-  'ta' => 'tml:80',
-'ta_IN'=> 'tml:80',
-  'tg' => 'tj:80 ru_yawerty:40',
-'tg_TJ'=> 'tj:80 ru_yawerty:40',
-  'th' => 'th:90',
-'th_TH'=> 'th:90',
-  'tr' => 'tr_q:85 tr_q:30',
-  'tt' => 'ru:50 ru_yawerty:40',
-  'uk' => 'ua:85 ru:50 ru_yawerty:40',
-'uk_UA'=> 'ua:85 ru:50 ru_yawerty:40',
-  'uz' => 'us:80',
-  'vi' => 'vn:80 us:60 us_intl:50',
-'vi_VN'=> 'vn:80 us:60 us_intl:50',
-  'wa' => 'be:85 fr:5',
-'zh_CN'=> 'us:60',
-'zh_HK'=> 'us:60',
-'zh_TW'=> 'us:60',
-);
-
-# USB kbd table
-# The numeric values are the bCountryCode field (5th byte)  of HID descriptor
-my %usb2drakxkbd =
-(
-  0x00 => undef, #- the keyboard don't tell its layout
-#-0x01 => 'ar',
-  0x02 => 'be',
-#-0x03 => 'ca', #- "Canadian bilingual" ??
-  0x04 => 'qc', #- Canadian French
-  0x05 => 'cz',
-  0x06 => 'dk',
-  0x07 => 'fi',
-  0x08 => 'fr',
-  0x09 => 'de',
-  0x0a => 'gr',
-  0x0b => 'il',
-  0x0c => 'hu',
-  0x0d => 'us_intl', #- "international ISO" ??
-  0x0e => 'it',
-  0x0f => 'jp',
-  0x10 => 'kr', #- Korean
-  0x11 => 'la',
-  0x12 => 'nl',
-  0x13 => 'no',
-  0x14 => 'ir',
-  0x15 => 'pl',
-  0x16 => 'pt',
-  0x17 => 'ru',
-  0x18 => 'sk',
-  0x19 => 'es',
-  0x1a => 'se',
-  0x1b => 'ch_de',
-  0x1c => 'ch_de',
-  0x1d => 'ch_de', #- USB spec says just "Swiss"
-#-0x1e => 'tw', # Taiwan
-  0x1f => 'tr_q',
-  0x20 => 'uk',
-  0x21 => 'us',
-  0x22 => 'yu',
-  0x23 => 'tr_f',
-#- higher codes not attribued as of 2002-02
-);
-
-#- key = extension for Xmodmap file, [0] = description of the keyboard,
-#- [1] = name for loadkeys, [2] = name for XKB, [3] = "1" if it is
-#- a multigroup layout (eg: one with latin/non-latin letters)
-my %keyboards = (
-arch() =~ /^sparc/ ? (
- "cz" => [ __("Czech (QWERTZ)"), "sunt5-cz-us",	    "cz",    0 ],
- "de" => [ __("German"),         "sunt5-de-latin1", "de",    0 ],
- "dvorak" => [ __("Dvorak"),     "sundvorak",       "dvorak",0 ],
- "es" => [ __("Spanish"),        "sunt5-es",        "es",    0 ],
- "fi" => [ __("Finnish"),        "sunt5-fi-latin1", "fi",    0 ],
- "fr" => [ __("French"),         "sunt5-fr-latin1", "fr",    0 ],
- "no" => [ __("Norwegian"),      "sunt4-no-latin1", "no",    0 ],
- "pl" => [ __("Polish"),         "sun-pl-altgraph", "pl",    0 ],
- "ru" => [ __("Russian"),        "sunt5-ru",        "ru",    1 ],
-# TODO: check the console map
- "se" => [ __("Swedish"),        "sunt5-fi-latin1", "se",    0 ],
- "uk" => [ __("UK keyboard"),    "sunt5-uk",        "gb",    0 ],
- "us" => [ __("US keyboard"),    "sunkeymap",       "us",    0 ],
-) : (
- "al" => [ __("Albanian"),       "al",              "al",    0 ],
- "am_old" => [ __("Armenian (old)"),"am_old",	    "am(old)", 1 ],
- "am" => [ __("Armenian (typewriter)"),"am-armscii8","am",   1 ],
- "am_phonetic" => [ __("Armenian (phonetic)"),"am_phonetic","am(phonetic)",1 ],
-#-"ar_azerty" => [ __("Arabic (AZERTY)"),"ar-8859_6","ar(azerty)",1 ],
-#-"ar_azerty_d" => [ __("Arabic (AZERTY, arabic digits)"),"ar-8859_6","ar(azerty_digits)",1 ],
-#-"ar" => [ __("Arabic (QWERTY)"),"ar-8859_6",      "ar",    1 ],
-#-"ar_d" => [ __("Arabic (QWERTY, arabic digits)"),"ar-8859_6","ar(digits)",1 ],
- "az" => [ __("Azerbaidjani (latin)"),"az",         "az",    0 ],
-#"a3" => [ __("Azerbaidjani (cyrillic)"), "az-koi8k","az(cyrillic)",1 ],
- "be" => [ __("Belgian"),        "be2-latin1",      "be",    0 ],
-"bg_phonetic" => [ __("Bulgarian (phonetic)"),"bg", "bg(phonetic)", 1 ],
- "bg" => [ __("Bulgarian (BDS)"), "bg",             "bg",    1 ],
- "br" => [ __("Brazilian (ABNT-2)"),"br-abnt2",     "br",    0 ],
- "by" => [ __("Belarusian"),      "by-cp1251",      "by",    1 ],
- "ch_de" => [ __("Swiss (German layout)"), "sg-latin1", "de_CH", 0 ],
- "ch_fr" => [ __("Swiss (French layout)"), "fr_CH-latin1", "fr_CH", 0 ],
- "cz" => [ __("Czech (QWERTZ)"), "cz-latin2",       "cz",    0 ],
- "cz_qwerty" => [ __("Czech (QWERTY)"), "cz-lat2", "cz_qwerty", 0 ],
- "de" => [ __("German"),         "de-latin1",       "de",    0 ],
- "de_nodeadkeys" => [ __("German (no dead keys)"), "de-latin1-nodeadkeys", "de(nodeadkeys)", 0 ],
- "dk" => [ __("Danish"),         "dk-latin1",       "dk",    0 ],
- "dvorak" => [ __("Dvorak (US)"), "pc-dvorak-latin1", "dvorak", 0 ],
- "dvorak_no" => [ __("Dvorak (Norwegian)"), "no-dvorak", "dvorak(no)", 0 ],
- "dvorak_se" => [ __("Dvorak (Swedish)"), "se-dvorak", "dvorak(se)", 0 ],
- "ee" => [ __("Estonian"),       "ee-latin9",       "ee",    0 ],
- "es" => [ __("Spanish"),        "es-latin1",       "es",    0 ],
- "fi" => [ __("Finnish"),        "fi-latin1",       "fi",    0 ],
- "fr" => [ __("French"),         "fr-latin1",       "fr",    0 ],
- "ge_ru"=>[__("Georgian (\"Russian\" layout)"),"ge_ru-georgian_academy","ge_ru",1],
- "ge_la"=>[__("Georgian (\"Latin\" layout)"),"ge_la-georgian_academy","ge_la",1],
- "gr" => [ __("Greek"),          "gr-8859_7",       "el",    1 ],
- "hu" => [ __("Hungarian"),      "hu-latin2",       "hu",    0 ],
- "hr" => [ __("Croatian"),	 "croat",           "hr",    0 ],
- "il" => [ __("Israeli"),        "il-8859_8",       "il",    1 ],
- "il_phonetic" => [ __("Israeli (Phonetic)"), "hebrew", "il_phonetic", 1 ],
- "ir" => [ __("Iranian"),        "ir-isiri_3342",   "ir",    1 ],
- "is" => [ __("Icelandic"),      "is-latin1",       "is",    0 ],
- "it" => [ __("Italian"),        "it-latin1",       "it",    0 ],
-#"iu" => [ __("Inuktitut"),      "iu",              "iu",    1 ],
- "jp" => [ __("Japanese 106 keys"), "jp106",        "jp",    1 ],
-#There is no XKB korean file yet; but using xmodmap one disables
-# some functioanlity; "us" used for XKB until this is fixed
- "kr" => [ __("Korean keyboard"), "us",             "us",    1 ],
- "la" => [ __("Latin American"), "la-latin1",       "la",    0 ],
- "lt" => [ __("Lithuanian AZERTY (old)"), "lt-latin7", "lt_a", 0 ],
-#- TODO: write a console kbd map for lt_new
- "lt_new" => [ __("Lithuanian AZERTY (new)"), "lt-latin7", "lt_std", 0 ],
- "lt_b" => [ __("Lithuanian \"number row\" QWERTY"), "ltb-latin7", "lt", 0 ],
- "lt_p" => [ __("Lithuanian \"phonetic\" QWERTY"), "ltp-latin7", "lt_p", 0 ],
- "lv" => [ __("Latvian"),	 "lv-latin7",       "lv",    0 ],
- "mk" => [ __("Macedonian"),	 "mk",              "mk",    1 ],
- "nl" => [ __("Dutch"),          "nl-latin1",       "nl",    0 ],
- "no" => [ __("Norwegian"),      "no-latin1",       "no",    0 ],
- "pl" => [ __("Polish (qwerty layout)"), "pl",      "pl",    0 ],
- "pl2" => [ __("Polish (qwertz layout)"), "pl-latin2", "pl2", 0 ],
- "pt" => [ __("Portuguese"),     "pt-latin1",       "pt",    0 ],
- "qc" => [ __("Canadian (Quebec)"), "qc-latin1", "ca_enhanced", 0 ],
-#- TODO: write a console kbd map for ro2
- "ro2" => [ __("Romanian (qwertz)"), "ro2",         "ro2",   0 ],
- "ro" => [ __("Romanian (qwerty)"), "ro",           "ro",    0 ],
- "ru" => [ __("Russian"),        "ru4",             "ru(winkeys)", 1 ],
- "ru_yawerty" => [ __("Russian (Yawerty)"), "ru-yawerty", "ru_yawerty", 1 ],
- "se" => [ __("Swedish"),        "se-latin1",       "se",    0 ],
- "si" => [ __("Slovenian"),      "slovene",         "si",    0 ],
- "sk" => [ __("Slovakian (QWERTZ)"), "sk-qwertz",   "sk",    0 ],
- "sk_qwerty" => [ __("Slovakian (QWERTY)"), "sk-qwerty", "sk_qwerty", 0 ],
-# TODO: console map
- "sr" => [ __("Serbian (cyrillic)"), "sr",          "sr",    0 ],
-# no console kbd that I'm aware of
- "tml" => [ __("Tamil"),	 "us",              "tml",   1 ],
- "th" => [ __("Thai keyboard"),  "th",              "th",    1 ],
-# TODO: console map
- "tj" => [ __("Tajik keyboard"), "ru4",             "tj",    1 ],
- "tr_f" => [ __("Turkish (traditional \"F\" model)"), "trf", "tr_f", 0 ],
- "tr_q" => [ __("Turkish (modern \"Q\" model)"), "tr_q-latin5", "tr", 0 ],
-#-"tw => [ __("Chineses bopomofo"), "tw",           "tw",    1 ],
- "ua" => [ __("Ukrainian"),      "ua",              "ua",    1 ],
- "uk" => [ __("UK keyboard"),    "uk",              "gb",    0 ],
- "us" => [ __("US keyboard"),    "us",              "us",    0 ],
- "us_intl" => [ __("US keyboard (international)"), "us-latin1", "us_intl", 0 ],
- "vn" => [ __("Vietnamese \"numeric row\" QWERTY"),"vn-tcvn", "vn(toggle)", 0 ], 
- "yu" => [ __("Yugoslavian (latin)"), "sr",         "yu",    0 ],
-),
-);
-
-#- list of  possible choices for the key combinations to toggle XKB groups
-#- (eg in X86Config file: XkbOptions "grp:toggle")
-my %kbdgrptoggle =
-(
-  'toggle' => _("Right Alt key"),
-  'shift_toggle' => _("Both Shift keys simultaneously"),
-  'ctrl_shift_toggle' => _("Control and Shift keys simultaneously"),
-  'caps_toggle' => _("CapsLock key"),
-  'ctrl_alt_toggle' => _("Ctrl and Alt keys simultaneously"),
-  'alt_shift_toggle' => _("Alt and Shift keys simultaneously"),
-  'menu_toggle' => _("\"Menu\" key"),
-  'lwin_toggle' => _("Left \"Windows\" key"),
-  'rwin_toggle' => _("Right \"Windows\" key"),
-);
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub keyboards { keys %keyboards }
-sub keyboard2text { $keyboards{$_[0]} && $keyboards{$_[0]}[0] }
-sub keyboard2kmap { $keyboards{$_[0]} && $keyboards{$_[0]}[1] }
-sub keyboard2xkb  { $keyboards{$_[0]} && $keyboards{$_[0]}[2] }
-
-sub loadkeys_files {
-    my ($err) = @_;
-    my $archkbd = arch() =~ /^sparc/ ? "sun" : arch() =~ /i.86/ ? "i386" : arch() =~ /ppc/ ? "mac" : arch();
-    my $p = "/usr/lib/kbd/keymaps/$archkbd";
-    my $post = ".kmap.gz";
-    my %trans = ("cz-latin2" => "cz-lat2");
-    my %find_file;
-    foreach my $dir (all($p)) {
-	$find_file{$dir} = '';
-	foreach (all("$p/$dir")) {
-	    $find_file{$_} and $err->("file $_ is both in $find_file{$_} and $dir") if $err;
-	    $find_file{$_} = "$p/$dir/$_";
-	}
-    }
-    my (@l, %l);
-    foreach (values %keyboards) {
-	local $_ = $trans{$_->[1]} || $_->[1];
-	my $l = $find_file{"$_$post"} || $find_file{first(/(..)/) . $post};
-	if ($l) {
-	    push @l, $l;
-	    foreach (`zgrep include $l | grep "^include"`) {
-		/include\s+"(.*)"/ or die "bad line $_";
-		@l{grep { -e $_ } ("$p/$1.inc.gz")} = ();
-	    }
-	} else {
-	    $err->("invalid loadkeys keytable $_") if $err;
-	}
-    }
-    uniq(@l, keys %l, grep { -e $_ } map { "$p/$_.inc.gz" } qw(compose euro windowkeys linux-keys-bare));
-}
-
-sub unpack_keyboards {
-    my ($k) = @_; $k or return;
-    [ grep { 
-	my $b = $keyboards{$_->[0]};
-	$b or log::l("bad keyboard $_->[0] in %keyboard::lang2keyboard");
-	$b;
-    } map { [ split ':' ] } split ' ', $k ];
-}
-sub lang2keyboards {
-    my @li = sort { $b->[1] <=> $a->[1] } map { @$_ } map {
-	#- first try with the 5 first chars of LANG; if it fails then try with
-	#- with the 2 first chars of LANG before resorting to default. 
-	unpack_keyboards($lang2keyboard{substr($_, 0, 5)}) || unpack_keyboards($lang2keyboard{substr($_, 0, 2)}) || [ [ ($keyboards{$_} ? $_ : "us") => 100 ] ];
-    } @_;
-    \@li;
-}
-sub lang2keyboard {
-    my ($l) = @_;
-    my $kb = lang2keyboards($l)->[0][0];
-    $keyboards{$kb} ? $kb : "us"; #- handle incorrect keyboard mapping to us.
-}
-sub usb2drakxkbd {
-    my ($cc) = @_;
-    my $kb = $usb2drakxkbd{$cc};
-#- TODO: detect when undef is returned because it is actualy not defined
-#- ($cc == 0) and when it is because of an unknown/not listed number;
-#- in that last case it would be nice to display a dialog telling the
-#- user to report the number to us.
-    $kb;
-}
-
-sub load {
-    my ($keymap) = @_;
-    return if $::testing;
-
-    my ($magic, @keymaps) = unpack "I i" . c::MAX_NR_KEYMAPS() . "a*", $keymap;
-    $keymap = pop @keymaps;
-
-    $magic != $KMAP_MAGIC and die "failed to read kmap magic";
-
-    local *F;
-    sysopen F, "/dev/console", 2 or die "failed to open /dev/console: $!";
-
-    my $count = 0;
-    foreach (0 .. c::MAX_NR_KEYMAPS() - 1) {
-	$keymaps[$_] or next;
-
-	my @keymap = unpack "s" . c::NR_KEYS() . "a*", $keymap;
-	$keymap = pop @keymap;
-
-	my $key = -1;
-	foreach my $value (@keymap) {
-	    $key++;
-	    c::KTYP($value) != c::KT_SPEC() or next;
-	    ioctl(F, c::KDSKBENT(), pack("CCS", $_, $key, $value)) or die "keymap ioctl failed ($_ $key $value): $!";
-	 }
-	$count++;
-    }
-    #- log::l("loaded $count keymap tables");
-}
-
-sub xmodmap_file {
-    my ($keyboard) = @_;
-    my $f = "$ENV{SHARE_PATH}/xmodmap/xmodmap.$keyboard";
-    if (! -e $f) {
-	eval {
-	    require packdrake;
-	    my $packer = new packdrake("$ENV{SHARE_PATH}/xmodmap.cz2", quiet => 1);
-	    $packer->extract_archive("/tmp", "xmodmap.$keyboard");
-	};
-	$f = "/tmp/xmodmap.$keyboard";
-    }
-    -e $f && $f;
-}
-
-sub setup {
-    return if arch() =~ /^sparc/;
-
-    #- Xpmac doesn't map keys quite right
-    if (arch() =~ /ppc/ && !$::testing && $ENV{DISPLAY}) {
-	log::l("Fixing Mac keyboard");
-	run_program::run('xmodmap', "-e",  "keycode 59 = BackSpace" );
-	run_program::run('xmodmap', "-e",  "keycode 131 = Shift_R" );
-	run_program::run('xmodmap', "-e",  "add shift = Shift_R" );
-	return;
-    }
-
-    my ($keyboard) = @_;
-    my $o = $keyboards{$keyboard} or return;
-
-    log::l("loading keymap $o->[1]");
-    if (-e (my $f = "$ENV{SHARE_PATH}/keymaps/$o->[1].bkmap")) {
-	load(scalar cat_($f));
-    } else {
-	local *F;
-	if (my $pid = open F, "-|") {
-	    local $/ = undef;
-	    eval { load(join('', <F>)) };
-	    waitpid $pid, 0;
-	} else {
-	    eval {
-		require packdrake;
-		my $packer = new packdrake("$ENV{SHARE_PATH}/keymaps.cz2", quiet => 1);
-		$packer->extract_archive(undef, "$o->[1].bkmap");
-	    };
-	    c::_exit(0);
-	}
-    }
-    my $f = xmodmap_file($keyboard);
-    eval { run_program::run('xmodmap', $f) } if $f && !$::testing && $ENV{DISPLAY};
-}
-
-sub write {
-    my ($prefix, $keyboard, $charset, $isNotDelete) = @_;
-
-    my $config = read_raw($prefix);
-    put_in_hash($config, {
-			  KEYTABLE => keyboard2kmap($keyboard), 
-			  KBCHARSET => $charset,
-			 });
-    add2hash_($config, {
-			DISABLE_WINDOWS_KEY => bool2yesno(detect_devices::isLaptop()),
-			BACKSPACE => $isNotDelete ? "BackSpace" : "Delete",
-		       });
-    setVarsInSh("$prefix/etc/sysconfig/keyboard", $config);
-    run_program::rooted($prefix, "dumpkeys > /etc/sysconfig/console/default.kmap") or log::l("dumpkeys failed");
-    if (arch() =~ /ppc/) {
-	my $s = "dev.mac_hid.keyboard_sends_linux_keycodes = 1\n";
-	substInFile { 
-            $_ = '' if /^\Qdev.mac_hid.keyboard_sends_linux_keycodes/;
-            $_ .= $s if eof;
-        } "$prefix/etc/sysctl.conf";
-    }
-}
-
-sub read_raw {
-    my ($prefix) = @_;
-    my %config = getVarsFromSh("$prefix/etc/sysconfig/keyboard");
-    \%config;
-}
-
-sub read {
-    my ($prefix) = @_;
-    my $keytable = read_raw($prefix)->{KEYTABLE};
-    keyboard2kmap($_) eq $keytable and return $_ foreach keys %keyboards;
-    $keyboards{$keytable} && $keytable; #- keep track of unknown keyboard.
-}
-
-sub check {
-    require lang;
-    $^W = 0;
-
-    my $ok = 1;
-    my $warn = sub {
-	print STDERR "$_[0]\n";
-    };
-    my $err = sub {
-	&$warn;
-	$ok = 0;
-    };
-
-    if (my @l = grep { is_empty_array_ref(lang2keyboards($_)) } lang::list()) {
-	$warn->("no keyboard for langs " . join(" ", @l));
-    }
-    foreach my $lang (lang::list()) {
-	my $l = lang2keyboards($lang);
-	foreach (@$l) {
-	    0 <= $_->[1] && $_->[1] <= 100 or $err->("invalid value $_->[1] in $lang2keyboard{$lang} for $lang in \%lang2keyboard keyboard.pm");
-	    $keyboards{$_->[0]} or $err->("invalid keyboard $_->[0] in $lang2keyboard{$lang} for $lang in \%lang2keyboard keyboard.pm");
-	}
-    }
-    !$_ || $keyboards{$_} or $err->("invalid keyboard $_ in \%usb2drakxkbd keyboard.pm") foreach values %usb2drakxkbd;
-
-    my @xkb_groups = map { if_(/grp:(\S+)/, $1) } cat_('/usr/lib/X11/xkb/rules/xfree86.lst');
-    $err->("invalid xkb group toggle '$_' in \%kbdgrptoggle") foreach difference2([ keys %kbdgrptoggle ], \@xkb_groups);
-    $warn->("unused xkb group toggle '$_'") foreach difference2(\@xkb_groups, [ keys %kbdgrptoggle ]);
-
-    my @xkb_layouts = (#- (map { (split)[0] } grep { /^! layout/ .. /^\s*$/ } cat_('/usr/lib/X11/xkb/rules/xfree86.lst')),
-		       all('/usr/lib/X11/xkb/symbols'),
-		       (map { (split)[2] } cat_('/usr/lib/X11/xkb/symbols.dir')));
-    $err->("invalid xkb layout $_") foreach difference2([ map { keyboard2xkb($_) } keyboards() ], \@xkb_layouts);
-
-    loadkeys_files($err);
-
-    exit($ok ? 0 : 1);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/lang.pm b/perl-install/lang.pm
deleted file mode 100644
index 5c70b235c..000000000
--- a/perl-install/lang.pm
+++ /dev/null
@@ -1,902 +0,0 @@
-package lang; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use log;
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-#- key (to be used in $LC_ALL), [0] = english name, [1] = charset encoding,
-#- [2] = value for $LANG used by DrakX, [3] = value for LANGUAGE (a list of
-#- possible languages, carefully choosen)
-#-
-#- when adding a new language here, also add a line in keyboards list
-
-#
-# NOTE: we cheat for a lot of locales (in particular UTF-8, in DrakX they are
-# the 8bit ones); it's easier like that now. Of course, on the installed
-# system a real UTF-8 locale will be used
-#
-
-my %languages = my @languages = (
-'en_US' => [ 'English|United States',	'C', 'en', 'en_US:en' ],
-'en_GB' => [ 'English|United Kingdom',	'iso-8859-15', 'en', 'en_GB:en' ],
-'en_IE' => [ 'English|Ireland',		'iso-8859-15','en', 'en_IE:en_GB:en' ],
-'en_US.UTF-8'=> [ 'English|UTF-8',	'utf_15',     'en', 'en_US:en' ],
-  'af'  => [ 'Afrikaans',		'iso-8859-1', 'af', 'af:en_ZA' ],
-'ar_EG.UTF-8'=> [ 'Arabic',		'utf_ar',     'ar', 'ar' ],
-#'az_AZ.ISO-8859-9E'=> [ 'Azeri (Latin)','iso-8859-9e','az', 'az:tr' ],
-'az_AZ.UTF-8'=> [ 'Azeri (Latin)',	'utf_az',     'az', 'az:tr' ],
-  'be'  => [ 'Belarussian (CP1251)',	'cp1251',     'be', 'be:be_BY.CP1251:ru_RU.CP1251' ],
-'be_BY.UTF-8'  => [ 'Belarussian (UTF-8)','utf_1251',   'be', 'be:be_BY.CP1251:ru_RU.CP1251' ],
-#- provide aliases for some not very standard names used in po files...
-  'bg'  => [ 'Bulgarian (CP1251)',	'cp1251',     'bg', 'bg:bg.CP1251:bg_BG.CP1251:bg_BG' ],
-'bg_BG.UTF-8'=> [ 'Bulgarian (UTF-8)',	'utf_1251',   'bg', 'bg:bg.CP1251:bg_BG.CP1251:bg_BG' ],
-  'br'  => [ 'Brezhoneg',		'iso-8859-15','br', 'br:fr_FR:fr' ],
-  'bs'  => [ 'Bosnian',			'iso-8859-2', 'bs', 'bs:hr:sr' ],
-'ca_ES' => [ 'Catalan',			'iso-8859-15','ca', 'ca:es_ES:es' ],
-  'cs'  => [ 'Czech',			'iso-8859-2', 'cs', 'cs' ],
-#  'cy'  => [ 'Cymraeg (Welsh)','iso-8859-14','cy', 'cy:en_GB:en' ],
-'cy_GB.UTF-8'=> [ 'Cymraeg (Welsh)',	'utf_14',   'cy', 'cy:en_GB:en' ],
-  'da'  => [ 'Danish',			'iso-8859-15', 'da', 'da' ],		
-'de_AT' => [ 'German|Austria',		'iso-8859-15','de', 'de_AT:de' ],
-'de_BE' => [ 'German|Belgium',		'iso-8859-15','de', 'de_BE:de' ],
-'de_CH' => [ 'German|Switzerland',	'iso-8859-15', 'de', 'de_CH:de' ],
-'de_DE' => [ 'German|Germany',		'iso-8859-15','de', 'de_DE:de' ],
-  'el'  => [ 'Greek',        'iso-8859-7', 'el', 'el' ],
-'el_GR.UTF-8'=> [ 'Greek (UTF-8)',        'utf_el',     'el', 'el' ],
-  'eo'  => [ 'Esperanto',		'utf_3',      'eo', 'eo' ],
-'es_AR' => [ 'Spanish|Argentina',	'iso-8859-1', 'es', 'es_AR:es_UY:es:es_ES' ],
-'es_ES' => [ 'Spanish|Spain (modern sorting)',	'iso-8859-15', 'es', 'es_ES:es' ],
-'es@tradicional' => [ 'Spanish|Spain (traditional sorting)', 'iso-8859-15', 'es', 'es' ],
-'es_ES.UTF-8'=> [ 'Spanish|Spain (UTF-8)','utf_15', 'es', 'es_ES:es' ],
-'es_MX' => [ 'Spanish|Mexico',	'iso-8859-1', 'es', 'es_MX:es:es_ES' ],
-  'et'  => [ 'Estonian',		'iso-8859-15','et', 'et' ],
-'eu_ES' => [ 'Euskara (Basque)','iso-8859-15', 'eu', 'eu' ],
-'fa_IR.UTF-8'=> [ 'Farsi (Iranian)',		'utf_fa', 'fa', 'fa' ],
-'fi_FI' => [ 'Finnish (Suomi)',	'iso-8859-15','fi', 'fi' ],
-#-'fo'  => [ 'Faroese',			'iso-8859-1', 'fo', 'fo' ],
-'fr_BE' => [ 'French|Belgium',	'iso-8859-15','fr', 'fr_BE:fr' ],
-'fr_CA' => [ 'French|Canada',		'iso-8859-15','fr', 'fr_CA:fr' ],
-'fr_CH' => [ 'French|Switzerland',	'iso-8859-15', 'fr', 'fr_CH:fr' ],
-'fr_FR' => [ 'French|France',	'iso-8859-15','fr', 'fr_FR:fr' ],
-'fr_FR.UTF-8'=> [ 'French|France (UTF-8)','utf_15','fr', 'fr_FR:fr' ],
-'ga_IE' => [ 'Gaeilge (Irish)',	'iso-8859-15','ga', 'ga:en_IE:en' ],
-#-'gd'  => [ 'Scottish gaelic',		'iso-8859-14','gd', 'gd:en_GB:en' ],
-'gl_ES' => [ 'Galego (Galician)','iso-8859-15','gl', 'gl:es_ES:pt_PT:pt_BR:es:pt' ],
-#-'gv'	=> [ 'Manx gaelic',		'iso-8859-14','gv', 'gv:en_GB:en' ],
-#- 'iw' was the old code for hebrew language
-#  'he'  => [ 'Hebrew',	'iso-8859-8', 'he', 'he:iw_IL' ],
-'he_IL.UTF-8'=> [ 'Hebrew',		'utf_he',     'he', 'he:iw_IL' ],
-  'hr'  => [ 'Croatian',		'iso-8859-2', 'hr', 'hr' ],
-  'hu'  => [ 'Hungarian', 		'iso-8859-2', 'hu', 'hu' ],
-#'hy_AM.ARMSCII-8'=> [ 'Armenian|ARMSCII-8','armscii-8','hy','hy' ],
-'hy_AM.UTF-8'=> [ 'Armenian',     'utf_hy',     'hy', 'hy' ],
-#- 'in' was the old code for indonesian language; by putting LANGUAGE=id:in_ID
-#- we catch the few catalog files still using the wrong code
-  'id'  => [ 'Indonesian',		'iso-8859-1', 'id', 'id:in_ID' ],
-  'is'  => [ 'Icelandic', 		'iso-8859-1', 'is', 'is' ],
-'it_CH' => [ 'Italian|Switzerland',	'iso-8859-15', 'it', 'it_IT:it' ],
-'it_IT' => [ 'Italian|Italy','iso-8859-15','it', 'it_IT:it' ],
-#-'iu'  => [ 'Inuktitut', 		'unicodeIU',  'iu', 'iu' ],
-  'ja'  => [ 'Japanese',		'jisx0208',   'ja', 'ja_JP.ujis:ja' ],
-'ja_JP.UTF-8'=> [ 'Japanese (UTF-8)',	'utf_ja',     'ja', 'ja_JP.ujis:ja' ],
-'ka_GE.UTF-8'=> [ 'Georgian',  		'utf_ka',     'ka', 'ka' ],
-#-'kl'  => [ 'Greenlandic (inuit)',	'iso-8859-1', 'kl', 'kl' ],
-  'ko'  => [ 'Korean',           'ksc5601',    'ko', 'ko' ],
-'ko_KR.UTF-8'=> [ 'Korean (UTF-8)',       'utf_ko',     'ko', 'ko' ],
-#-'kw'	=> [ 'Cornish gaelic',		'iso-8859-14','kw', 'kw:en_GB:en' ],
-#-'lo'  => [ 'Laotian',			'mulelao-1',  'lo', 'lo' ],
-  'lt'  => [ 'Lithuanian',		'iso-8859-13','lt', 'lt' ],
-  'lv'  => [ 'Latvian',			'iso-8859-13','lv', 'lv' ],   
-  'mi'	=> [ 'Maori',			'iso-8859-13','mi', 'mi' ],
-# 'mk'  => [ 'Macedonian (Cyrillic)','iso-8859-5', 'mk', 'mk' ],
-'mk_MK.UTF-8'=> [ 'Macedonian (Cyrillic)','utf_1251',   'mk', 'mk' ],
-  'ms'  => [ 'Malay',			'iso-8859-1', 'ms', 'ms' ],
-# 'mt'  => [ 'Maltese|ISO-8859-3',	'iso-8859-3', 'mt', 'mt' ],
-'mt_MT.UTF-8'=> [ 'Maltese',	'utf_3',      'mt', 'mt' ],
-'nl_BE' => [ 'Dutch|Belgium',	'iso-8859-15', 'nl', 'nl_BE:nl' ],
-'nl_NL' => [ 'Dutch|Netherlands','iso-8859-15', 'nl', 'nl_NL:nl' ],
-# 'nb' is the new locale name in glibc 2.2
-  'no'  => [ 'Norwegian|Bokmaal',	'iso-8859-1', 'no', 'no:nb:nn:no@nynorsk:no_NY' ],
-# no_NY is used by KDE (but not standard); 'nn' is the new locale in glibc 2.2
-  'nn'	=> [ 'Norwegian|Nynorsk',	'iso-8859-1', 'no', 'nn:no@nynorsk:no_NY:no:nb' ],
-#-'oc'  => [ 'Occitan',			'iso-8859-1', 'oc', 'oc:fr_FR' ],
-#-'pd'	=> [ 'Plauttdietsch',		'iso-8859-1', 'pd', 'pd' ],
-#-'ph'  => [ 'Pilipino',		'iso-8859-1', 'ph', 'ph:tl' ],
-  'pl'  => [ 'Polish',			'iso-8859-2', 'pl', 'pl' ],
-#-'pp'	=> [ 'Papiamento',		'iso-8859-1', 'pp', 'pp' ],
-'pt_BR' => [ 'Portuguese|Brazil',	'iso-8859-1', 'pt_BR', 'pt_BR:pt_PT:pt' ],
-'pt_PT' => [ 'Portuguese|Portugal','iso-8859-15','pt', 'pt_PT:pt:pt_BR' ],
-  'ro'  => [ 'Romanian',  		'iso-8859-2', 'ro', 'ro' ],
-'ru_RU.KOI8-R' => [ 'Russian|KOI8-R',	'koi8-r',     'ru', 'ru_RU:ru' ],
-'ru_RU.CP1251' => [ 'Russian|CP1251',	'cp1251',     'ru', 'ru_RU:ru' ],
-'ru_RU.UTF-8' => [ 'Russian|UTF-8',	'utf_1251',   'ru', 'ru_RU:ru' ],
-  'sk'  => [ 'Slovak',    		'iso-8859-2', 'sk', 'sk' ],
-  'sl'  => [ 'Slovenian',		'iso-8859-2', 'sl', 'sl' ],
-#  'sp'  => [ 'Serbian|Cyrillic (ISO-8859-5)','iso-8859-5', 'sp', 'sp:sr' ],
-#'sp_YU.CP1251'=> [ 'Serbian|Cyrillic (CP1251)','cp1251',    'sp', 'sp:sr' ],
-'sp_YU.UTF-8'=> [ 'Serbian|Cyrillic','utf_1251',   'sp', 'sp:sr' ],
-  'sr'  => [ 'Serbian|Latin (ISO-8859-2)','iso-8859-2','sr', 'sr' ],
-'sr_YU.UTF-8'=> [ 'Serbian|Latin (UTF-8)',	'utf_2',      'sr', 'sr' ],
-  'sv'  => [ 'Swedish',			'iso-8859-1', 'sv', 'sv' ],
-# there is no tamil font curently; so set DrakX encoding to utf_1
-# note: most of the gnome translations for tamil are broken (using bad
-# encoding)
-'ta_IN.UTF-8'=> [ 'Tamil',		'utf_1',      'ta', 'ta' ],
-'tg_TJ.UTF-8'=> [ 'Tajik',		'utf_koi',    'tg', 'tg' ],
-  'th'  => [ 'Thai|TIS-620',            'tis620',     'th', 'th' ],
-'th_TH.UTF-8'=> [ 'Thai (UTF-8)',         'utf_th',     'th', 'th' ],
-  'tr'  => [ 'Turkish',	 		'iso-8859-9', 'tr', 'tr' ],
-#-'tt_RU.UTF-8'=> [ 'Tatar',		'koi8-k',  'tt', 'tt' ],
-#-'ur'	=> [ 'Urdu',			'cp1256',     'ur', 'ur' ],  
-'uk_UA' => [ 'Ukrainian|KOI8-U', 	'koi8-u',     'uk', 'uk_UA:uk' ],
-'uk_UA.CP1251'=> [ 'Ukrainian|CP1251',	'cp1251',     'uk', 'uk_UA:uk' ],
-'uk_UA.UTF-8'=> [ 'Ukrainian|UTF-8',	'utf_1251',   'uk', 'uk_UA:uk' ],
-  'uz'  => [ 'Uzbek',			'iso-8859-1', 'uz', 'uz' ],
-#'vi_VN.TCVN'  => [ 'Vietnamese|TCVN',   'tcvn',     'vi', 'vi' ],
-#'vi_VN.VISCII' => [ 'Vietnamese|VISCII','viscii',   'vi', 'vi' ],
-'vi_VN.UTF-8' => [ 'Vietnamese',  'utf_vi',   'vi', 'vi' ],
-  'wa'  => [ 'Walon',     		'iso-8859-15', 'wa', 'wa:fr_BE:fr' ],
-#-'yi'	=> [ 'Yiddish',			'cp1255',     'yi', 'yi' ],
-# NOTE: 'zh' must be in the LANGUAGE list, it is not used for translations
-# themselves but is needed for our selection of locales-xx packages
-# and the language dependent packages resolution
-#'zh_HK.Big5' => [ 'Chinese|Traditional|Hong Kong|Big5', 'Big5', 'zh_TW.Big5', 'zh_TW.Big5:zh_TW:zh_HK:zh' ],
-#'zh_HK.UTF-8' => [ 'Chinese|Traditional|Hong Kong|UTF-8','utf_tw','zh_HK', 'zh_HK:zh_TW.Big5:zh_TW:zh' ],
-'zh_TW.Big5' => [ 'Chinese|Traditional|Big5', 'Big5', 'zh_TW.Big5', 'zh_TW.Big5:zh_TW:zh_HK:zh' ],
-'zh_TW.UTF-8' => [ 'Chinese|Traditional|UTF-8','utf_tw','zh_TW','zh_TW.Big5:zh_TW.big5:zh_TW:zh_HK:zh' ],
-'zh_CN.GB2312' => [ 'Chinese|Simplified|GB2312', 'gb2312', 'zh_CN.GB2312', 'zh_CN.GB2312:zh_CN:zh' ],
-'zh_CN.UTF-8' => [ 'Chinese|Simplified|UTF-8','utf_cn','zh_CN', 'zh_CN.GB2312:zh_CN:zh' ],
-# does this one works? 
-#'zh_CN.GB18030' => [ 'Chinese|Simplified|GB18030','gb2312','zh_CN', 'zh_CN.GB2312:zh_CN:zh' ],
-);
-@languages = map { $_->[0] } group_by2(@languages);
-
-my %xim = (
-  'zh_TW.Big5' => { 
- 	ENC => 'big5',
- 	XIM => 'xcin',
- 	XIM_PROGRAM => 'xcin',
- 	XMODIFIERS => '"@im=xcin"',
- 	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_TW.Big5@chinput' => {
-	ENC => 'big5',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_TW.UTF-8' => {
-	ENC => 'utf8',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_CN.GB2312' => {
-	ENC => 'gb',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'zh_CN.UTF-8' => {
-	ENC => 'utf8',
-	XIM => 'Chinput',
-	XIM_PROGRAM => 'chinput',
-	XMODIFIERS => '"@im=Chinput"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'ko' => {
-	ENC => 'kr',
-	XIM => 'Ami',
-	# NOTE: there are several possible versions of ami, for the different
-	# desktops (kde, gnome, etc). So XIM_PROGRAM isn't defined; it will
-	# be the xinitrc script, XIM section, that will choose the right one 
-	# XIM_PROGRAM => 'ami',
-	XMODIFIERS => '"@im=Ami"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'ko_KR.UTF-8' => {
-	ENC => 'utf8',
-	XIM => 'Ami',
-	# NOTE: there are several possible versions of ami, for the different
-	# desktops (kde, gnome, etc). So XIM_PROGRAM isn't defined; it will
-	# be the xinitrc script, XIM section, that will choose the right one 
-	# XIM_PROGRAM => 'ami',
-	XMODIFIERS => '"@im=Ami"',
-	CONSOLE_NOT_LOCALIZED => 'yes',
-  },
-  'ja' => {
-	ENC => 'eucj',
-	XIM => 'kinput2',
-	XIM_PROGRAM => 'kinput2',
-	XMODIFIERS => '"@im=kinput2"',
-  },
-  'ja_JP.UTF-8' => {
-	ENC => 'utf8',
-	XIM => 'kinput2',
-	XIM_PROGRAM => 'kinput2',
-	XMODIFIERS => '"@im=kinput2"',
-  },
-  # XFree86 has an internal XIM for Thai that enables syntax checking etc.
-  # 'Passthroug' is no check at all, 'BasicCheck' accepts bad sequences
-  # and convert them to right ones, 'Strict' refuses bad sequences
-  'th' => {
-	XIM_PROGRAM => '/bin/true', # it's an internal module
-	XMODIFIERS => '"@im=BasicCheck"',
-  },
-  # xvnkb is not an XIM input method; but an input method of another
-  # kind, only XIM_PROGRAM needs to be defined
-  'vi' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-  'vi_VN.TCVN' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-  'vi_VN.VISCII' => {
-	XIM_PROGRAM => 'xvnkb',
-  },
-);
-
-sub std2 { "-*-*-medium-r-normal-*-$_[1]-*-*-*-*-*-$_[0]" }
-sub std_ { std2($_[0], 10), std2($_[0], 10) }
-sub std  { std2($_[0], $_[1] || 10), std2($_[0],  8) }
-
-#- [0]: console font name; [1]: sfm map for console font (if needed)
-#- [2]: acm file for console font;
-#- [3]: iocharset param for mount; [4]: codepage parameter for mount
-#- [5]: X11 fontset (for DrakX)
-my %charsets = (
-  "armscii-8"  => [ "arm8",		"armscii8.uni",	"trivial.trans",
-    undef,	undef, std_("armscii-8") ],
-  "utf_hy"     => [ "arm8",		"armscii8.uni",	"trivial.trans",
-    "utf8",	undef, std_("armscii-8") ],
-#- chinese needs special console driver for text mode
-  "Big5"       => [ undef,		undef,		undef,
-	"big5", "950", "-*-*-*-*-*-*-*-*-*-*-*-*-big5-0" ],
-  "utf_tw"     => [ undef,		undef,		undef,
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-big5-0" ],
-  "gb2312"     => [ undef,		undef,		undef,
-	"gb2312", "936", "-*-*-*-*-*-*-*-*-*-*-*-*-gb2312.1980-0" ],
-  "utf_cn"     => [ undef,		undef,		undef,
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-gb2312.1980-0" ],
-  "utf_ka"      => [ "t_geors",		"geors.uni",	"geors_to_geops.trans",
-	"utf8",  undef, "-*-*-*-*-*-*-*-*-*-*-*-*-georgian-academy" ],
-  "C" => [ "lat1-16",	undef,		"iso15",
-	"iso8859-1", "850", sub { std("iso8859-1", @_) } ],
-  "iso-8859-1" => [ "lat1-16",	undef,		"iso1",
-	"iso8859-1", "850", sub { std("iso8859-15", @_) } ],
-  "utf_1"      => [ "lat0-16",	undef,		"iso1",
-	"utf8", undef, sub { std("iso8859-15", @_) } ],
-  "iso-8859-2" => [ "lat2-sun16",	undef,		"iso02",
-	"iso8859-2", "852", sub { std("iso8859-2", @_) } ],
-  "utf_2"      => [ "lat2-sun16",	undef,		"iso02",
-	"utf8", undef, sub { std("iso8859-2", @_) } ],
-  "iso-8859-3" => [ "iso03.f16",	undef,		"iso03",
-	"iso8859-3", undef, std_("iso8859-3") ],
-  "utf_3" => [ "iso03.f16",	undef,		"iso03",
-	"utf8", undef, std_("iso8859-3") ],
-#  "iso-8859-4" => [ "lat4u-16",		undef,		"iso04",
-#	"iso8859-4", "775", std_("iso8859-4") ],
-  "iso-8859-5" => [ "UniCyr_8x16",	undef,	"iso05",
-  	"iso8859-5", "855", sub { std("microsoft-cp1251", @_) } ],
-#-#- arabic needs special console driver for text mode [acon]
-#-#- (and gtk support isn't done yet)
-  "iso-8859-6" => [ "iso06.f16",	"iso06",	"trivial.trans",
-    "iso8859-6", "864", std_("iso8859-6") ],
-  "utf_ar" => [ "iso06.f16",	"iso06",	"trivial.trans",
-    "utf8", "864", std_("iso8859-6") ],
-  "iso-8859-7" => [ "iso07.f16",	undef,	"iso07",
-	"iso8859-7", "869", std_("iso8859-7") ],
-  "utf_el" => [ "iso07.f16",	undef,		"iso07",
-	"utf8", "869", std_("iso8859-7") ],
-#-#- hebrew needs special console driver for text mode [acon]
-#-#- (and gtk support isn't done yet)
-   "iso-8859-8" => [ "iso08.f16",	"iso08",	"trivial.trans",
-#	std_("iso8859-8") ],
-	"iso8859-8", "862", std_("microsoft-cp1255") ],
-  "iso-8859-9" => [ "iso09.f16",	"iso09",	"trivial.trans",
-	"iso8859-9", "857", sub { std("iso8859-9", @_) } ],
-  "iso-8859-13" => [ "tlat7",		"iso13",	"trivial.trans",
-	"iso8859-13", "775", std_("iso8859-13") ],
-  "utf_13" => [ "tlat7",		"iso13",	"trivial.trans",
-	"utf8", "775", std_("iso8859-13") ],
-  "iso-8859-14" => [ "iso14",		undef,		"iso14",
-	"iso8859-14", "850", std_("iso8859-14") ],
-  "utf_14" => [ "iso14",		undef,		"iso14",
-	"utf8", undef, std_("iso8859-14") ],
-  "iso-8859-15" => [ "lat0-16",	undef,		"iso15",
-	"iso8859-15", "850", sub { std("iso8859-15", @_) } ],
-  "utf_15" => [ "lat0-16",	undef,		"iso15",
-	"utf8", undef, sub { std("iso8859-15", @_) } ],
-  "utf_az"      => [ "tiso09e",		"iso09",	"trivial.trans",
-	"utf8", undef, std2("iso8859-9e",10) ],
-#- japanese needs special console driver for text mode [kon2]
-  "jisx0208"   => [ undef,		undef,		"trivial.trans",
-	"euc-jp", "932", "-*-*-*-*-*-*-*-*-*-*-*-*-jisx*.*-0" ],
-  "utf_ja"   => [ undef,		undef,		"trivial.trans",
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-jisx*.*-0" ],
-  "koi8-r"     => [ "UniCyr_8x16",	undef,		"koi8-r",
-	"koi8-r", "866", sub { std("microsoft-cp1251", @_) } ],
-  "koi8-u"     => [ "UniCyr_8x16",	undef,		"koi8-u",
-	"koi8-u", "866", sub { std("microsoft-cp1251", @_) } ],
-  "utf_koi"     => [ "koi8-k",		"iso01",	"trivial.trans",
-	"utf8", undef, std("koi8-k") ],
-  "cp1251"     => [ "UniCyr_8x16",	undef,		"cp1251",
-	"cp1251", "866", sub { std("microsoft-cp1251", @_) } ],
-  "utf_1251"   => [ "UniCyr_8x16",	undef,		"cp1251",
-	"utf8", undef, sub { std("microsoft-cp1251", @_) } ],
-#- Yiddish needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-#  "cp1255"     => [ "iso08.f16",        "iso08",        "trivial.trans",
-#	"cp1255", "862", std_("microsoft-cp1255") ],
-  "utf_he"     => [ "iso08.f16",        "iso08",        "trivial.trans",
-	"utf8", "862", std_("microsoft-cp1255") ],
-#- Urdu needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-#  "cp1256"     => [ undef,              undef,          "trivial.trans",
-#	undef, "864", std_("microsoft-cp1255") ],
-#- korean needs special console driver for text mode
-  "ksc5601"    => [ undef,		undef,		undef,
-	"euc-kr", "949", "-*-*-*-*-*-*-*-*-*-*-*-*-ksc5601.1987-*" ],
-  "utf_ko"    => [ undef,		undef,		undef,
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-ksc5601.1987-*" ],
-#- I have no console font for Thai...
-  "tis620"     => [ undef,		undef,		"trivial.trans",
-	"tis-620", "874", std2("tis620.2533-1",12) ],
-  "utf_th"     => [ undef,		undef,		"trivial.trans",
-	"utf8", "874", std2("tis620.2533-1",12) ],
-  "tcvn"       => [ "tcvn8x16",		"tcvn",		"trivial.trans",
-	undef, undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-  "viscii"     => [ "viscii10-8x16",	"viscii.uni",	"viscii1.0_to_viscii1.1.trans",
-#-	"-*-*-*-*-*-*-*-*-*-*-*-*-viscii1.1-1" ],
-	undef, undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-  "utf_vi"     => [ "tcvn8x16",		"tcvn",		"trivial.trans",
-	"utf8", undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-#- Farsi (iranian) needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-#  "isiri-3342" => [ undef,		undef,		"trivial.trans",
-#	undef, undef, "-*-*-*-*-*-*-*-*-*-*-*-*-isiri-3342" ],
-  "utf_fa" => [ undef,			undef,		"trivial.trans",
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-iso10646-1" ],
-#  "tscii-0" => [ "tamil",		undef,		"trivial.trans",
-#	undef, undef, "-*-*-*-*-*-*-*-*-*-*-*-*-tscii-0" ],
-  "unicode" => [ undef,			undef,		"trivial.trans",
-	"utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-iso10646-1" ],
-);
-
-my %bigfonts = (
-    Big5     => 'taipei16.pcf.gz',
-    gb2312   => 'gb16fs.pcf.gz',
-    jisx0208 => 'k14.pcf.gz',
-    ksc5601  => 'baekmuk_gulim_h_14.pcf.gz',
-    unicode  => 'cu12.pcf.gz',
-);
-
-#- for special cases not handled magically
-my %charset2kde_charset = (
-    gb2312 => 'gb2312.1980-0',
-    jisx0208 => 'jisx0208.1983-0',
-    ksc5601 => 'ksc5601.1987-0',
-    Big5 => 'big5-0',
-    cp1251 => 'microsoft-cp1251',
-    utf8 => 'iso10646-1',
-    tis620 => 'tis620-0',
-);
-
-#- for special cases not handled magically
-my %lang2country = (
-  ar => 'eg',
-  be => 'by',
-  bs => 'bh',
-  cs => 'cz',
-  da => 'dk',
-  el => 'gr',
-  et => 'ee',
-  ko => 'kr',
-  mi => 'nz',
-  ms => 'my',
-  nn => 'no',
-  sl => 'si',
-  sp => 'sr',
-  sv => 'se',
-);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-
-sub list { 
-    my (%options) = @_;
-    my @l = @languages;
-    if ($options{exclude_non_necessary_utf8}) {
-	my %LANGs_non_utf8 = map { lang2LANG($_) => 1 } grep { !/UTF-8/ } @languages;
-	@l = grep { !/UTF-8/ || !$LANGs_non_utf8{lang2LANG($_)} } @l;
-    }
-    if ($options{exclude_non_installed_langs}) {
-	@l = grep { -e "/usr/share/locale/" . lang2LANG($_) . "/LC_CTYPE" } @l;
-    }
-    @l;
-}
-sub lang2text     { exists $languages{$_[0]} && $languages{$_[0]}[0] }
-sub lang2charset  { exists $languages{$_[0]} && $languages{$_[0]}[1] }
-sub lang2LANG     { exists $languages{$_[0]} && $languages{$_[0]}[2] }
-sub lang2LANGUAGE { exists $languages{$_[0]} && $languages{$_[0]}[3] }
-sub getxim { $xim{$_[0]} }
-
-sub lang2country {
-    my ($lang, $prefix) = @_;
-
-    my $dir = "$prefix/usr/share/locale/l10n";
-    my @countries = grep { -d "$dir/$_" } all($dir);
-    my %countries; @countries{@countries} = ();
-
-    my $valid_country = sub {
-	my ($country) = @_;
-	#- fast & dirty solution to ensure bad entries do not happen
-	exists $countries{$country} && $country;
-    };
-
-    my $country;
-    if ($country ||= $lang2country{$lang}) {
-	return $valid_country->($country) ? $country : 'C';
-    }
-    $country ||= $valid_country->(lc($1)) if $lang =~ /([A-Z]+)/;
-    $country ||= $valid_country->(lc($1)) if lang2LANGUAGE($lang) =~ /([A-Z]+)/;
-    $country ||= $valid_country->(substr($lang, 0, 2));
-    $country ||= first(grep { $valid_country->($_) } map { substr($_, 0, 2) } split(':', lang2LANGUAGE($lang)));
-    $country || 'C';
-}
-
-
-sub country2lang {
-    my ($country, $default) = @_;
-
-    my $uc_country = uc $country;
-    my %country2lang = reverse %lang2country;
-    
-    my ($lang1, $lang2);
-    $lang1 ||= $country2lang{$country};
-    $lang1 ||= first(grep { /^$country/    } list());
-    $lang1 ||= first(grep { /_$uc_country/ } list());
-    $lang2 ||= first(grep { int grep { /^$country/    } split(':', lang2LANGUAGE($_)) } list());
-    $lang2 ||= first(grep { int grep { /_$uc_country/ } split(':', lang2LANGUAGE($_)) } list());
-    ($lang1 =~ /UTF-8/ && $lang2 !~ /UTF-8/ ? $lang2 || $lang1 : $lang1 || $lang2) || $default || 'en_US';
-}
-
-sub lang2kde_lang {
-    my ($lang, $default) = @_;
-
-    #- get it using 
-    #- echo C $(rpm -qp --qf "%{name}\n" /RPMS/kde-i18n-*  | sed 's/kde-i18n-//')
-    my @valid_kde_langs = qw(C af az bg ca cs da de el en_GB eo es et fi fr he hu is it ja ko lt lv mt nl no no_NY pl pt pt_BR ro ru sl sk sr sv ta th tr uk xh zh_CN.GB2312 zh_TW.Big5);
-    my %valid_kde_langs; @valid_kde_langs{@valid_kde_langs} = ();
-
-    my $valid_lang = sub {
-	my ($lang) = @_;
-	#- fast & dirty solution to ensure bad entries do not happen
-	$lang eq 'en' ? 'C' :
-	  exists $valid_kde_langs{$lang} ? $lang :
-	  exists $valid_kde_langs{substr($lang, 0, 2)} ? substr($lang, 0, 2) : '';
-    };
-
-    my $r;
-    $r ||= $valid_lang->(lang2LANG($lang));
-    $r ||= first(grep { $valid_lang->($_) } split(':', lang2LANGUAGE($lang)));
-    $r || $default || 'C';
-}
-
-sub kde_lang2lang {
-    my ($klang, $default) = @_;
-    first(grep { /^$klang/ } list()) || $default || 'en_US';
-}
-
-sub kde_lang_country2lang {
-    my ($klang, $country, $default) = @_;
-    my $uc_country = uc $country;
-    # country is used to precise the lang
-    my @choices = grep { /^$klang/ } list();
-    my @sorted = 
-      @choices == 2 && length $choices[0] !~ /[._]/ && $choices[1] =~ /UTF-8/ ? @choices :
-      map { $_->[0] } sort { $b->[1] <=> $a->[1] } map { [ $_ => /_$uc_country/ ] } @choices;
-    
-    $sorted[0] || $default || 'en_US';
-}
-
-sub charset2kde_charset {
-    my ($charset, $default) = @_;
-    my $iocharset = ($charsets{$charset} || [])->[3];
-
-    my @valid_kde_charsets = qw(big5-0 gb2312.1980-0 iso10646-1 iso8859-1 iso8859-4 iso8859-6 iso8859-8 iso8859-13 iso8859-14 iso8859-15 iso8859-2 iso8859-3 iso8859-5 iso8859-7 iso8859-9 koi8-r koi8-u ksc5601.1987-0 jisx0208.1983-0 microsoft-cp1251 tis620-0);
-    my %valid_kde_charsets; @valid_kde_charsets{@valid_kde_charsets} = ();
-
-    my $valid_charset = sub {
-	my ($charset) = @_;
-	#- fast & dirty solution to ensure bad entries do not happen
-	exists $valid_kde_charsets{$charset} && $charset;
-    };
-
-    my $r;
-    $r ||= $valid_charset->($charset2kde_charset{$charset});
-    $r ||= $valid_charset->($charset2kde_charset{$iocharset});
-    $r ||= $valid_charset->($iocharset);
-    $r || $default || 'iso10646-1';
-}
-
-#- font+size for different charsets; the field [0] is the default,
-#- others are overrridens for fixed(1), toolbar(2), menu(3) and taskbar(4)
-my %charset2kde_font = (
-  'C' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'iso-8859-1'  => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'iso-8859-2'  => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'iso-8859-9'  => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'iso-8859-15' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'utf_1'       => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'utf_2'       => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'utf_15'      => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
-  'gb2312' => [ "default-ming,16" ],
-  'jisx0208' => [ "misc-fixed,14", "wadalab-gothic,13" ],
-  'ksc5601' => [ "daewoo-gothic,16" ],
-  'Big5'   => [ "taipei-fixed,16" ],
-  'utf_hy' => [ "clearlyu,17" ],
-  'utf_ka' => [ "clearlyu,17" ],
-  'utf_vi' => [ "misc-fixed,13", "misc-fixed,13", "misc-fixed,10", ],
-  'default' => [ "misc-fixed,13", "misc-fixed,13", "misc-fixed,10", ],
-);
-
-sub charset2kde_font {
-    my ($charset, $type) = @_;
-    my $kdecharset = charset2kde_charset($charset);
-    
-    my $font = $charset2kde_font{$charset} || $charset2kde_font{default};
-    my $r = $font->[$type] || $font->[0];
-
-    #- the format is "font-name,size,5,kdecharset,0,0" I have no idea of the
-    #- meaning of that "5"...
-    "$r,5,$kdecharset,0,0";
-}
-
-sub set { 
-    my ($lang, $translate_for_console) = @_;
-
-    if ($lang && !exists $languages{$lang}) {
-	#- try to find the best lang
-	my ($lang2) = grep { /^\Q$lang/ } list(); #- $lang is not precise enough, choose the first complete
-	my ($lang3) = grep { $lang =~ /^\Q$_/ } list(); #- $lang is too precise, choose the first substring matching
-	log::l("lang::set: fixing $lang with ", $lang2 || $lang3);
-	$lang = $lang2 || $lang3;
-    }
-
-    if ($lang && exists $languages{$lang}) {
-	#- use "packdrake -x" that follow symlinks and expand directory.
-	#- it is necessary as there is a lot of symlinks inside locale.cz2,
-	#- using a compressed cpio archive is nighmare to extract all files.
-	#- reset locale environment variable to avoid any warnings by perl,
-	#- so installation of new locale is done with empty locale ...
-	if (!-e "$ENV{SHARE_PATH}/locale/$lang" && common::usingRamdisk()) {
-	    @ENV{qw(LANG LC_ALL LANGUAGE LINGUAS)} = ();
-
-	    eval { rm_rf("$ENV{SHARE_PATH}/locale") };
-	    eval {
-		require packdrake;
-		my $packer = new packdrake("$ENV{SHARE_PATH}/locale.cz2", quiet => 1);
-		$packer->extract_archive("$ENV{SHARE_PATH}/locale", lang2LANG($lang));
-
-		#- LC_COLLATE and LC_CTYPE are getFile'd (cuz they are big, causing the .cz2 to be *big*)
-		my ($dir) = glob_("$ENV{SHARE_PATH}/locale/*");
-		install_any::getAndSaveFile ("$dir/$_") foreach 'LC_COLLATE', 'LC_CTYPE';
-	    };
-	}
-
-#- set all LC_* variables to a unique locale ("C"), and only redefine
-#- LC_CTYPE (for X11 choosing the fontset) and LANGUAGE (for the po files)
-	$ENV{LC_NUMERIC}		= "C";
-	$ENV{LC_TIME}			= "C";
-	$ENV{LC_COLLATE}		= "C";
-	$ENV{LC_MONETARY}		= "C";
-	$ENV{LC_PAPER}			= "C";
-	$ENV{LC_NAME}			= "C";
-	$ENV{LC_ADDRESS}		= "C";
-	$ENV{LC_TELEPHONE}		= "C";
-	$ENV{LC_MEASUREMENT}	= "C";
-	$ENV{LC_IDENTIFICATION}	= "C";
-
-#- use lang2LANG() to define LC_CTYPE, so DrakX will use a same encoding
-#- for all variations of a same language, eg both 'ru_RU.KOI8-R' and
-#- 'ru_RU.UTF-8' will be handled the same (as 'ru') by DrakX.
-#- that way DrakX only needs a reduced set of locale and fonts support.
-#- of course on the installed system they will be different.
-	$ENV{LC_CTYPE}  = lang2LANG($lang);
-	$ENV{LC_MESSAGES} = lang2LANG($lang);
-	$ENV{LANG}      = lang2LANG($lang);
-
-	if ($translate_for_console && $lang =~ /^(ko|ja|zh|th)/) {
-	    log::l("not translating in console");
-	    $ENV{LANGUAGE}  = 'C';
-	} else {
-	    $ENV{LANGUAGE}  = lang2LANGUAGE($lang);
-	}
-	load_mo();
-    } else {
-	# stick with the default (English) */
-	delete $ENV{LANG};
-	delete $ENV{LC_ALL};
-	delete $ENV{LANGUAGE};
-	delete $ENV{LINGUAS};
-    }
-    $lang;
-}
-
-sub langs {
-    my ($l) = @_;
-    grep { $l->{$_} } keys %$l;
-}
-
-sub langsLANGUAGE {
-    my ($l) = @_;
-    my @l = $l->{all} ? list() : langs($l);
-    uniq(map { split ':', lang2LANGUAGE($_) } @l);
-}
-
-sub pack_langs { 
-    my ($l) = @_; 
-    my $s = $l->{all} ? 'all' : join ':', uniq(map { lang2LANGUAGE($_) } langs($l));
-    $ENV{RPM_INSTALL_LANG} = $s;
-    $s;
-}
-
-sub unpack_langs {
-    my ($s) = @_;
-    my @l = uniq(map { split ':', lang2LANGUAGE($_) } split(':', $s));
-    my @l2 = intersection(\@l, [ keys %languages ]);
-    +{ map { $_ => 1 } @l2 };
-}
-
-sub read {
-    my ($prefix, $user_only) = @_;
-    my ($f1, $f2) = ("$prefix$ENV{HOME}/.i18n", "$prefix/etc/sysconfig/i18n");
-    my %h = getVarsFromSh($user_only && -e $f1 ? $f1 : $f2);
-    my $lang = $h{LC_MESSAGES} || 'en_US';
-    $lang = bestMatchSentence($lang, list()) if !exists $languages{$lang};
-    my $langs = $user_only ? () :
-      cat_("$prefix/etc/rpm/macros") =~ /%_install_langs (.*)/ ? unpack_langs($1) : { $lang => 1 };
-    $lang, $langs;
-}
-
-sub write_langs {
-    my ($prefix, $langs) = @_;
-    my $s = pack_langs($langs);
-    symlink "$prefix/etc/rpm", "/etc/rpm" if $prefix;
-    substInFile { s/%_install_langs.*//; $_ .= "%_install_langs $s\n" if eof && $s } "$prefix/etc/rpm/macros";
-}
-
-sub write { 
-    my ($prefix, $lang, $user_only, $dont_touch_kde_files) = @_;
-
-    $lang or return;
-
-    my $h = {};
-    $h->{$_} = $lang foreach qw(LC_COLLATE LC_CTYPE LC_MESSAGES LC_NUMERIC LC_MONETARY LC_TIME);
-    if ($lang && exists $languages{$lang}) {
-## note: KDE is unable to use the keyboard if LC_* and LANG values differ...
-#	add2hash $h, { LANG => lang2LANG($lang), LANGUAGE => lang2LANGUAGE($lang) };
-	add2hash $h, { LANG => $lang, LANGUAGE => lang2LANGUAGE($lang) };
-
-	my $c = $charsets{lang2charset($lang) || ''};
-	if ($c && !$user_only) {
-	    my $p = "$prefix/usr/lib/kbd";
-	    if ($c->[0]) {
-		eval {
-		    cp_af("$p/consolefonts/$c->[0].psf.gz", "$prefix/etc/sysconfig/console/consolefonts");
-		    add2hash $h, { SYSFONT => $c->[0] };
-		};
-		$@ and log::l("missing console font $c->[0]");
-	    }
-	    if ($c->[1]) {
-		eval {
-		    cp_af(glob_("$p/consoletrans/$c->[1]*"), "$prefix/etc/sysconfig/console/consoletrans");
-		    add2hash $h, { UNIMAP => $c->[1] };
-		};
-		$@ and log::l("missing console unimap file $c->[1]");
-	    }
-	    if ($c->[2]) {
-		eval {
-		    cp_af(glob_("$p/consoletrans/$c->[2]*"), "$prefix/etc/sysconfig/console/consoletrans");
-		    add2hash $h, { SYSFONTACM => $c->[2] };
-		};
-		$@ and log::l("missing console acm file $c->[2]");
-	    }
-
-	}
-	add2hash $h, $xim{$lang};
-    }
-    setVarsInSh($prefix . ($user_only ? "$ENV{HOME}/.i18n" : '/etc/sysconfig/i18n'), $h);
-
-    eval {
-	my $charset = lang2charset($lang);
-	my $confdir = $prefix . ($user_only ? "$ENV{HOME}/.kde" : '/usr') . '/share/config';
-	my ($prev_kde_charset) = cat_("$confdir/kdeglobals") =~ /^Charset=(.*)/mi;
-
-	mkdir_p($confdir);
-
-	update_gnomekderc("$confdir/kdeglobals", Locale => (
-			      Charset => charset2kde_charset($charset),
-			      Country => lang2country($lang, $prefix),
-			      Language => lang2kde_lang($lang),
-			  ));
-
-        if ($prev_kde_charset ne charset2kde_charset($charset)) {
-	    update_gnomekderc("$confdir/kdeglobals", WM => (
-	    		      activeFont => charset2kde_font($charset,0),
-	    		  ));
-	    update_gnomekderc("$confdir/kdeglobals", General => (
-	    		      fixed => charset2kde_font($charset, 1),
-	    		      font => charset2kde_font($charset, 0),
-	    		      menuFont => charset2kde_font($charset, 3),
-	    		      taskbarFont => charset2kde_font($charset, 4),
-	    		      toolBarFont => charset2kde_font($charset, 2),
-	    	          ));
-	    update_gnomekderc("$confdir/konquerorrc", FMSettings => (
-	    		      StandardFont => charset2kde_font($charset, 0),
-	    		  ));
-	    update_gnomekderc("$confdir/kdesktoprc", FMSettings => (
-	    		      StandardFont => charset2kde_font($charset, 0),
-	    		  ));
-	}
-    } if !$dont_touch_kde_files;
-}
-
-sub bindtextdomain() {
-    my $localedir = "$ENV{SHARE_PATH}/locale";
-    $localedir .= "_special" if $::isInstall;
-
-    c::setlocale();
-    c::bindtextdomain('libDrakX', $localedir);
-
-    $localedir;
-}
-
-sub load_mo {
-    my ($lang) = @_;
-
-    my $localedir = bindtextdomain();
-    my $suffix = 'LC_MESSAGES/libDrakX.mo';
-
-    $lang ||= $ENV{LANGUAGE} || $ENV{LC_ALL} || $ENV{LC_MESSAGES} || $ENV{LANG};
-
-    foreach (split ':', $lang) {
-	my $f = "$localedir/$_/$suffix";
-	-s $f and return $_;
-
-	if ($::isInstall && common::usingRamdisk()) {
-	    # cleanup
-	    eval { rm_rf($localedir) };
-	    eval { mkdir_p(dirname("$localedir/$_/$suffix")) };
-	    install_any::getAndSaveFile ("$localedir/$_/$suffix");
-
-	    -s $f and return $_;
-	}
-    }
-    '';
-}
-
-
-
-sub console_font_files {
-    map { -e $_ ? $_ : "$_.gz" }
-      (map { "/usr/lib/kbd/consolefonts/$_.psf" } uniq grep {$_} map { $_->[0] } values %charsets),
-      (map { -e $_ ? $_ : "$_.sfm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep {$_} map { $_->[1] } values %charsets),
-      (map { -e $_ ? $_ : "$_.acm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep {$_} map { $_->[2] } values %charsets),
-}
-
-sub load_console_font {
-    my ($lang) = @_;
-    my ($f, $u, $m) = @{$charsets{lang2charset($lang)} || []};
-
-    require run_program;
-    run_program::run(if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), 
-		     'consolechars', '-v', '-f', $f || 'lat0-sun16',
-		     if_($u, '-u', $u), if_($m, '-m', $m));
-}
-
-#-sub load_font {
-#-    my ($charset) = @_;
-#-    my $fontFile = "lat0-sun16";
-#-
-#-    if (my $c = $charsets{$charset}) {
-#-	   log::l("loading $charset font");
-#-	   $fontFile = $c->[0];
-#-    }
-#-
-#-    # text mode font
-#-    log::l("loading font $ENV{SHARE_PATH}/consolefonts/$fontFile");
-#-    #c::loadFont("/tmp/$fontFile") or log::l("error in loadFont: one of PIO_FONT PIO_UNIMAPCLR PIO_UNIMAP PIO_UNISCRNMAP failed: $!");
-#-    #print STDERR "\033(K";
-#-
-#-}
-
-sub get_x_fontset {
-    my ($lang, $size) = @_;
-
-    my $charset = lang2charset($lang) or return;
-    my $c = $charsets{$charset} or return;
-    if (my $f = $bigfonts{$charset}) {
-	my $dir = "/usr/X11R6/lib/X11/fonts";
-	if (! -e "$dir/$f" && $::isInstall && common::usingRamdisk()) {
-	    unlink "$dir/$_" foreach values %bigfonts;
-	    install_any::remove_bigseldom_used ();
-	    install_any::getAndSaveFile ("$dir/$f");
-	}
-    }
-    my ($big, $small) = @$c[5..6];
-    ($big, $small) = $big->($size) if ref $big;
-    ($big, $small);
-}
-
-sub fs_options {
-    my ($lang) = @_;
-    my $charset = lang2charset($lang) or return;
-    my $c = $charsets{$charset} or return;
-    my ($iocharset, $codepage) = @$c[3..4];
-    $iocharset, $codepage;
-}
-
-sub charset {
-    my ($lang, $prefix) = @_;
-    my $l = lang2LANG($lang);
-    foreach (cat_("$prefix/usr/X11R6/lib/X11/locale/locale.alias")) {
-	/$l:\s+.*\.(\S+)/ and return $1;
-    }
-    $l =~ /.*\.(\S+)/ and return $1;
-}
-
-
-sub check {
-    $^W = 0;
-    my $ok = 1;
-    my $warn = sub {
-	print STDERR "$_[0]\n";
-    };
-    my $err = sub {
-	&$warn;
-	$ok = 0;
-    };
-    
-    my @wanted_charsets = uniq map { lang2charset($_) } list();
-    $err->("invalid charset $_ ($_ does not exist in \%charsets)") foreach difference2(\@wanted_charsets, [ keys %charsets ]);
-    $err->("invalid charset $_ in \%charset2kde_font ($_ does not exist in \%charsets)") foreach difference2([ keys %charset2kde_font ], [ 'default', keys %charsets ]);
-    $warn->("unused charset $_ (given in \%charsets, but not used in \%languages)") foreach difference2([ keys %charsets ], \@wanted_charsets);
-
-    $warn->("unused entry $_ in \%xim") foreach difference2([ keys %xim ], [ list() ]);
-
-    # consolefonts are checked during build via console_font_files()
-
-    if (my @l = difference2([ 'default', keys %charsets ], [ keys %charset2kde_font ])) {
-	$warn->("no kde font for charset " . join(" ", @l));
-    }
-
-    if (my @l = grep { lang2country($_) eq 'C' } list()) {
-	$warn->("no country for langs " . join(" ", @l));
-    }
-    if (my @l = grep { lang2kde_lang($_, 'err') eq 'err' } list()) {
-	$warn->("no KDE lang for langs " . join(" ", @l));
-    }
-    if (my @l = grep { charset2kde_charset($_, 'err') eq 'err' } keys %charsets) {
-	$warn->("no KDE charset for charsets " . join(" ", @l));
-    }
-    exit($ok ? 0 : 1);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/list.sparc b/perl-install/list.sparc
deleted file mode 100644
index 448e0b63e..000000000
--- a/perl-install/list.sparc
+++ /dev/null
@@ -1,74 +0,0 @@
-/bin/ash
-/bin/cpio
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/sbin/fdisk
-/sbin/ifport
-/sbin/insmod
-/sbin/mkraid
-/sbin/rmmod
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/raidstart
-/usr/bin/bzip2
-/usr/bin/perl
-/usr/lib/libimlib-png.so
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/5.00503/AutoLoader.pm
-/usr/lib/perl5/5.00503/Carp.pm
-/usr/lib/perl5/5.00503/Data/Dumper.pm
-/usr/lib/perl5/5.00503/Exporter.pm
-/usr/lib/perl5/5.00503/FileHandle.pm
-/usr/lib/perl5/5.00503/SelectSaver.pm
-/usr/lib/perl5/5.00503/SelfLoader.pm
-/usr/lib/perl5/5.00503/Symbol.pm
-/usr/lib/perl5/5.00503/Time/Local.pm
-/usr/lib/perl5/5.00503/dumpvar.pl
-/usr/lib/perl5/5.00503/sparc-linux/Config.pm
-/usr/lib/perl5/5.00503/sparc-linux/DynaLoader.pm
-/usr/lib/perl5/5.00503/sparc-linux/Fcntl.pm
-/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/5.00503/sparc-linux/IO/File.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Handle.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Seekable.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Socket.pm
-/usr/lib/perl5/5.00503/sparc-linux/Socket.pm
-/usr/lib/perl5/5.00503/sparc-linux/_h2ph_pre.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm-sparc/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm-sparc64/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/5.00503/sparc-linux/auto/IO/IO.so
-/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.so
-/usr/lib/perl5/5.00503/sparc-linux/bits/syscall.ph
-/usr/lib/perl5/5.00503/sparc-linux/sys/syscall.ph
-/usr/lib/perl5/5.00503/sparc-linux/syscall.ph
-/usr/lib/perl5/5.00503/lib.pm
-/usr/lib/perl5/5.00503/overload.pm
-/usr/lib/perl5/5.00503/strict.pm
-/usr/lib/perl5/5.00503/vars.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.so
-/usr/lib/rpm/rpmrc
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/Xsun
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/xf86Wacom.so
diff --git a/perl-install/live_install b/perl-install/live_install
deleted file mode 100755
index 937661a7d..000000000
--- a/perl-install/live_install
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-
-if [ "$UID" -ne 0 ]; then
-    echo >&2 "you need to be root to start live install"
-    exit 3
-fi
-
-if [ -x ./Mandrake/mdkinst/usr/bin/perl-install/live_install2 ]; then
-    dir=`pwd`/Mandrake/mdkinst
-elif [ -x ../../../../../Mandrake/mdkinst/usr/bin/perl-install/live_install2 ]; then
-    dir=`pwd`/../../..
-else
-    echo >&2 "unable to get a working live system to start, check your working directory"
-    exit 2
-fi
-
-/bin/rm -rf /tmp/image
-/bin/mkdir -m 0700 /tmp/image || exit 1
-/bin/rm -rf /tmp/drakx
-/bin/mkdir -m 0700 /tmp/drakx || exit 2
-
-for i in Mandrake RPMS misc boot images VERSION
-do
-    /bin/ln -sf "$dir/../../$i" "/tmp/image/$i" 
-done
-
-/bin/cp -a "$dir/../../Mandrake/mdkinst" "/tmp/drakx"
-
-if [ -x "/tmp/drakx/mdkinst/usr/bin/perl-install/live_install2" ]; then
-    # get correct fonts for DrakX.
-    if [ -n "$DISPLAY" ]; then
-	xset +fp /tmp/drakx/mdkinst/usr/X11R6/lib/X11/fonts/
-	xset fp rehash
-    fi
-
-    # avoid pollution for environment
-    unset LC_MONETARY LC_CTYPE LC_NUMERIC LC_MESSAGES LC_TIME LC_COLLATE LANGUAGE LANG RPM_INSTALL_LANG
-
-    # start DrakX, do not keep shell script in background else the CD is locked by it!!!
-    cd /tmp/drakx/mdkinst/usr/bin/perl-install
-    exec /usr/bin/perl ./live_install2
-fi
-
-echo >&2 "unable to get a working live system to start, check your working directory"
-exit 2
diff --git a/perl-install/live_install2 b/perl-install/live_install2
deleted file mode 100755
index 58c5e9e83..000000000
--- a/perl-install/live_install2
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/usr/bin/perl
-
-my $dir = `pwd`;
-chomp $dir;
-$dir .= "/../../..";
-
-#- perl version of the install, we use directly the version we found,
-#- this means there SHOULD BE no module compiled for an older version of perl
-#- which will be used by DrakX.
-my ($version, $arch) = (glob "$dir/usr/lib/perl5/*/*/CORE/libperl.so")[0] =~ m|$dir/usr/lib/perl5/([^/]*)/([^/]*)/CORE/libperl.so|;
-
-#- keep it mind the ELF loader to use.
-$ENV{LD_LOADER} = "$dir/lib/ld-linux.so.2";
-
-$ENV{LOCPATH}="$dir/usr/share/locale";
-$ENV{GCONV_PATH}="$dir/usr/lib/gconv";
-$ENV{PERL5LIB} = join ":", map { "$dir/usr/lib/perl5/$_" } ("$version/$arch",
-							    "$version",
-							    "site_perl/$version/$arch",
-							    "site_perl/$version",
-							    "site_perl");
-$ENV{LD_LIBRARY_PATH} = "$dir/usr/bin:$dir/bin:$dir/sbin:$dir/usr/sbin:$dir/usr/X11R6/bin:$dir/lib:$dir/usr/lib:$dir/usr/lib/perl5/$version/$arch/CORE";
-$ENV{PATH} = join(":", map { "$dir/$_" } split ":", "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin") . ":$ENV{PATH}";
-$ENV{SHARE_PATH} = "$dir/usr/share";
-$ENV{RPMRC_FILE} = "$dir/usr/lib/rpm/rpmrc";
-$ENV{GTK_DATA_PREFIX} = "$dir/usr";
-$ENV{GTK_EXE_PREFIX} = "$dir/usr";
-$ENV{GDK_IMLIB_PATH} = "$dir/usr/lib";
-
-system $ENV{LD_LOADER}, "../perl", "-i", "-pe", "s,^(.*macrofiles[^/]*)(.*),\$1$dir/usr/lib/rpm/macros:\$2,", $ENV{RPMRC_FILE};
-system $ENV{LD_LOADER}, "../perl", "./install2", "--live", @ARGV;
-
-#- at this point, unwind above else they will not run correctly (wrong ld-linux.so.2)
-delete $ENV{GTK_EXE_PREFIX};
-delete $ENV{RPMRC_FILE};
-delete $ENV{LOCPATH};
-delete $ENV{SHARE_PATH};
-delete $ENV{PATH};
-delete $ENV{LD_LIBRARY_PATH};
-delete $ENV{PERL5LIB};
-delete $ENV{LD_LOADER};
-
-$ENV{DISPLAY} and system "xset", "-fp", "/tmp/drakx/mdkinst/usr/X11R6/lib/X11/fonts/";
-foreach (qw(misc PEX Speedo Type1 mdk 75dpi 100dpi cyrillic)) {
-    -d "/usr/X11R6/lib/X11/fonts/$_" or next;
-    -e "/usr/X11R6/lib/X11/fonts/$_/fonts.dir" and next;
-    chdir "/usr/X11R6/lib/X11/fonts/$_";
-    system "mkfontdir";
-}
-$ENV{DISPLAY} and system "xset", "fp", "rehash";
-
-system "/bin/rm", "-rf", "/tmp/drakx";
-system "/bin/rm", "-rf", "/tmp/rhimage";
-
-exec "/bin/sync";
diff --git a/perl-install/log.pm b/perl-install/log.pm
deleted file mode 100644
index 649ed30a0..000000000
--- a/perl-install/log.pm
+++ /dev/null
@@ -1,58 +0,0 @@
-package log; # $Id$
-
-use diagnostics;
-use strict;
-use c;
-
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my $logOpen = 0;
-my $logDebugMessages = 0;
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub F() { *LOG }
-
-sub l {
-    $logOpen or openLog();
-    if ($::isStandalone) {
-	c::syslog(c::LOG_WARNING(), join("", @_));
-    } elsif ($::isInstall) {
-	print LOG "* ", @_, "\n";
-	print LOG2 "* ", @_, "\n";
-    } else {
-	print STDERR @_, "\n";
-    }
-}
-sub ld { $logDebugMessages and &l }
-sub w { &l }
-
-sub openLog(;$) {
-    if ($::isInstall) {
-	if ($_[0]) { #- useLocal
-	    open LOG, "> $_[0]";# or die "no log possible :(";
-	} else {
-	    open LOG, "> /dev/tty3";# or die "no log possible :(";
-	}
-	open LOG2, ">> /tmp/ddebug.log";# or die "no log possible :(";
-	select((select(LOG),  $| = 1)[0]);
-	select((select(LOG2), $| = 1)[0]);
-    }
-    exists $ENV{DEBUG} and $logDebugMessages = 1;
-    $logOpen = 1;
-}
-
-sub closeLog() { 
-    if ($::isStandalone) {
-	c::closelog();
-    } else { close LOG; close LOG2; }
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/loopback.pm b/perl-install/loopback.pm
deleted file mode 100644
index 24c519ecb..000000000
--- a/perl-install/loopback.pm
+++ /dev/null
@@ -1,129 +0,0 @@
-package loopback; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use partition_table qw(:types);
-use fs;
-use fsedit;
-use log;
-
-
-sub carryRootLoopback {
-    my ($part) = @_;
-    $_->{mntpoint} eq '/' and return 1 foreach @{$part->{loopback} || []};
-    0;
-}
-
-sub check_circular_mounts {
-    my ($hd, $part, $all_hds) = @_;
-
-    my $fstab = [ fsedit::get_all_fstab($all_hds), $part ]; # no pb if $part is already in $all_hds
-
-    my $base_mntpoint = $part->{mntpoint};
-    my $check; $check = sub {
-	my ($part, @seen) = @_;
-	push @seen, $part->{mntpoint} || return;
-	@seen > 1 && $part->{mntpoint} eq $base_mntpoint and die _("Circular mounts %s\n", join(", ", @seen));
-	if (my $part = fs::up_mount_point($part->{mntpoint}, $fstab)) {
-	    #- '/' carrier is a special case, it will be mounted first
-	    $check->($part, @seen) if !carryRootLoopback($part);
-	}
-	if (isLoopback($part)) {
-	    $check->($part->{loopback_device}, @seen);
-	}
-    };
-    $check->($part) if !($base_mntpoint eq '/' && isLoopback($part)); #- '/' is a special case, no loop check
-}
-
-sub carryRootCreateSymlink {
-    my ($part, $prefix) = @_;
-
-    carryRootLoopback($part) or return;
-
-    my $mntpoint = "$prefix$part->{mntpoint}";
-    unless (-e $mntpoint) {
-	eval { mkdir_p(dirname($mntpoint)) };
-	#- do non-relative link for install, should be changed to relative link before rebooting
-	symlink "/initrd/loopfs", $mntpoint;
-
-	mkdir_p("/initrd/loopfs/lnx4win/boot");
-	symlink "/initrd/loopfs/lnx4win/boot", "$prefix/boot";
-    }
-    #- indicate kernel to keep initrd
-    mkdir "$prefix/initrd", 0755;
-}
-
-
-sub format_part {
-    my ($part, $prefix) = @_;
-    fs::mount_part($part->{loopback_device}, $prefix);
-    create($part, $prefix);
-    fs::real_format_part($part);
-}
-
-sub create {
-    my ($part, $prefix) = @_;
-    my $f = $part->{device} = "$prefix$part->{loopback_device}{mntpoint}$part->{loopback_file}";
-    return if -e $f;
-
-    eval { mkdir_p(dirname($f)) };
-
-    log::l("creating loopback file $f ($part->{size} sectors)");
-
-    local *F;
-    my $block_size = 128;
-    my $s = "\0" x (512 * $block_size);
-    sysopen F, $f, 2 | c::O_CREAT() or die "failed to create loopback file";
-    for (my $i = 0; $i < $part->{size}; $i += $block_size) {
-	syswrite F, $s or die "failed to create loopback file";
-    }
-}
-
-sub getFree {
-    my ($dir, $part) = @_;
-    my $freespace = $dir ? 
-      2 * (MDK::Common::System::df($dir))[1] : #- df in KiB
-      $part->{size};
-
-    $freespace - sum map { $_->{size} } @{$part->{loopback} || []};
-}
-
-#- returns the size of the loopback file if it already exists
-#- returns -1 is the loopback file can't be used
-sub verifFile {
-    my ($dir, $file, $part) = @_;
-    -e "$dir$file" and return -s "$dir$file";
-
-    $_->{loopback_file} eq $file and return -1 foreach @{$part->{loopback} || []};
-
-    undef;
-}
-
-sub prepare_boot {
-    my ($prefix) = @_;
-    my $r = readlink "$prefix/boot"; 
-    unlink "$prefix/boot"; 
-    mkdir "$prefix/boot", 0755;
-    [$r, $prefix];
-}
-
-sub save_boot {
-    my ($loop_boot, $prefix) = @{$_[0]};
-    
-    $loop_boot or return;
-
-    my @files = glob_("$prefix/boot/*");
-    cp_af(@files, $loop_boot) if @files;
-    rm_rf("$prefix/boot");
-    symlink $loop_boot, "$prefix/boot";
-}
-
-
-1;
-
diff --git a/perl-install/lvm.pm b/perl-install/lvm.pm
deleted file mode 100644
index 327e07fe2..000000000
--- a/perl-install/lvm.pm
+++ /dev/null
@@ -1,124 +0,0 @@
-package lvm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use fsedit;
-use devices;
-use run_program;
-
-#- for partition_table_xxx emulation
-sub hasExtended { 0 }
-sub adjustStart {}
-sub adjustEnd {}
-sub write {}
-sub cylinder_size { 
-    my ($hd) = @_;
-    $hd->{PE_size};
-}
-
-init();
-
-sub init {
-    eval { modules::load('lvm-mod') };
-    run_program::run('vgscan') if !-e '/etc/lvmtab';
-    run_program::run('vgchange', '-a', 'y');
-}
-
-sub check {
-    my ($in) = @_;
-
-    my $f = '/sbin/pvcreate';
-    -e $f or $in->do_pkgs->install('lvm');
-    -e $f or $in->ask_warn('', "Mandatory package lvm is missing"), return;
-    init();
-    1;
-}
-
-sub get_vg {
-    my ($part) = @_;
-    my $dev = expand_symlinks(devices::make($part->{device}));
-    install_any::check_prog ("pvdisplay") if $::isInstall;
-    (split(':', `pvdisplay -c $dev`))[1];
-}
-
-sub update_size {
-    my ($lvm) = @_;
-    install_any::check_prog ("vgdisplay") if $::isInstall;
-    my @l = split(':', `vgdisplay -c -D $lvm->{LVMname}`);
-    $lvm->{totalsectors} = ($lvm->{PE_size} = $l[12]) * $l[13];
-}
-
-sub get_lvs {
-    my ($lvm) = @_;
-    install_any::check_prog ("vgdisplay") if $::isInstall;
-    my @l = `vgdisplay -v -D $lvm->{LVMname}`;
-    install_any::check_prog ("lvdisplay") if $::isInstall;
-    $lvm->{primary}{normal} = 
-      [
-       map {
-	   my $type = -e "/dev/$_" && fsedit::typeOfPart("/dev/$_");
-	   { device => $_, 
-	     type => $type || 0x83,
-	     size => (split(':', `lvdisplay -D -c /dev/$_`))[6] }
-       } map { m|^LV Name\s+/dev/(\S+)| ? $1 : () } @l
-      ];
-}
-
-sub vg_add {
-    my ($part) = @_;
-    if (my $old_name = get_vg($part)) {
-	run_program::run('vgchange', '-a', 'n', $old_name);
-	run_program::run('vgremove', $old_name);	
-    }
-    my $dev = expand_symlinks(devices::make($part->{device}));
-    run_program::run_or_die('pvcreate', '-y', '-ff', $dev);
-    my $prog = run_program::run('vgdisplay', $part->{lvm}) ? 'vgextend' : 'vgcreate';
-    run_program::run_or_die($prog, $part->{lvm}, $dev);
-}
-
-sub vg_destroy {
-    my ($lvm) = @_;
-
-    is_empty_array_ref($lvm->{primary}{normal}) or die _("Remove the logical volumes first\n");
-    run_program::run('vgchange', '-a', 'n', $lvm->{LVMname});
-    run_program::run_or_die('vgremove', $lvm->{LVMname});
-    foreach (@{$lvm->{disks}}) {
-	delete $_->{lvm};
-	$_->{isFormatted} = 0;
-	$_->{notFormatted} = 1;	
-    }
-}
-
-sub lv_delete {
-    my ($lvm, $lv) = @_;
-
-    run_program::run_or_die('lvremove', '-f', "/dev/$lv->{device}");
-
-    my $list = $lvm->{primary}{normal};
-    @$list = grep { $_ != $lv } @$list;
-}
-
-sub lv_create {
-    my ($lvm, $lv) = @_;
-    my $list = $lvm->{primary}{normal};
-    my $nb = 1 + max(map { basename($_->{device}) } @$list);
-    $lv->{device} = "$lvm->{LVMname}/$nb";
-    run_program::run_or_die('lvcreate', '--size', int($lv->{size} / 2) . 'k', '-n', $nb, $lvm->{LVMname});
-    $lv->{notFormatted} = 1;
-    $lv->{isFormatted} = 0;
-    push @$list, $lv;
-}
-
-sub lv_resize {
-    my ($lv, $oldsize) = @_;
-    run_program::run_or_die($oldsize > $lv->{size} ? ('lvreduce', '-f') : 'lvextend', 
-			    '--size', int($lv->{size} / 2) . 'k', "/dev/$lv->{device}");
-}
-
-1;
diff --git a/perl-install/modparm.pm b/perl-install/modparm.pm
deleted file mode 100644
index 849cc40a1..000000000
--- a/perl-install/modparm.pm
+++ /dev/null
@@ -1,78 +0,0 @@
-package modparm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-
-
-sub parameters {
-  my ($module) = @_;
-
-  my $modinfo = '/sbin/modinfo';
-  -x $modinfo or $modinfo = '/usr/bin/modinfo';
-  -x $modinfo or die _('modinfo is not available');
-
-  if (!$::isStandalone && !$::testing) {
-      modules::extract_modules('/tmp', $module);
-      $module = "/tmp/$module.o";
-  }
-
-  my @parameters;
-  foreach (join_lines(`$modinfo -p $module`)) {
-      chomp;
-      next if /^warning:/;
-      (my $name, $_) = /(\S+)\s+(.*)/s or warn "modparm::get_options_name($module): unknown line\n";
-
-      my $c_types = 'int|string|short|byte|char|long';
-      my ($is_a_number, $description, $min, $max) = (0, '', 1, 1);
-      if (/^($c_types) array \(min = (\d+), max = (\d+)\),?\s*(.*)/s) {
-	  $_ = $4;
-	  #- seems like "char" are buggy entries
-	  ($is_a_number, $min, $max) = ($1 ne 'string', $2, $3) if $1 ne 'char'; 
-      } elsif (/^($c_types),?\s*(.*)/s) {
-	  $_ = $2;
-	  #- here "char" really are size-limited strings, modinfo doesn't display the size limit (but since we don't care about it, it doesn't matter :)
-	  $is_a_number = $1 ne 'string' if $1 ne 'char';
-      } else {
-	  #- for things like "no format character" or "unknown format character"
-      }
-      if (/^description "(.*)",?\s*/s) {
-	  ($description, $_) = ($1, $2);
-      }
-      #- print "STILL HAVE ($_)\n" if $_;
-
-      my $format =
-	$min == 1 && $max == 1 ?
-	  ($is_a_number ? _("a number") : '') :
-	$min == $max ? 
-	  ($is_a_number ? _("%d comma separated numbers", $min) : _("%d comma separated strings", $min)) :
-	$min == 1 ?
-	  ($is_a_number ? _("comma separated numbers") : _("comma separated strings")) :
-        ''; #- to weird and buggy, do not display it
-
-      push @parameters, [ $format ? "$name ($format)" : $name, $description ];
-  }
-  @parameters;
-}
-
-
-sub join_lines {
-    my @l;
-    my $s;
-    foreach (@_) {
-	if (/^\s/) {
-	    $s .= $_;
-	} else {
-	    push @l, $s if $s;
-	    $s = $_;
-	}
-    }
-    @l, if_($s, $s);
-}
-
-1;
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
deleted file mode 100644
index 6a87c4081..000000000
--- a/perl-install/modules.pm
+++ /dev/null
@@ -1,389 +0,0 @@
-package modules; # $Id$
-
-use strict;
-
-use common;
-use detect_devices;
-use run_program;
-use log;
-use list_modules;
-
-my %conf;
-
-sub category2modules_and_description {
-    my ($categories) = @_;
-    my $f = '/lib/modules/' . c::kernel_version() . '/modules.description';
-    -e $f or $f = '/lib/modules.description';
-    my %modules_descriptions = map { /(\S+)\s+(.*)/ } cat_($f);
-    map { $_ => $modules_descriptions{$_} } category2modules($categories);
-}
-
-#-###############################################################################
-#- module loading
-#-###############################################################################
-# handles dependencies
-# eg: load('vfat', 'reiserfs', [ ne2k => 'io=0xXXX', 'dma=5' ])
-sub load {
-    #- keeping the order of modules
-    my %options;
-    my @l = map {
-	my ($name, @options) = ref $_ ? @$_ : $_;
-	$options{$name} = \@options;
-	dependencies_closure($name);
-    } @_;
-
-    @l = difference2([ uniq(@l) ], [ loaded_modules() ]) or return;
-
-    my $network_module = do {
-	my ($network_modules, $other) = partition { module2category($_) =~ m,network/(main|usb), } @l;
-	if (@$network_modules > 1) {
-	    # do it one by one
-	    load($_) foreach @$network_modules;
-	    load(@$other);
-	    return;
-	}
-	$network_modules->[0];
-    };
-    my @network_devices = $network_module ? detect_devices::getNet() : ();
-
-    if ($::testing) {
-	log::l("i would load module $_ (@{$options{$_}})") foreach @l;
-    } elsif ($::isStandalone || $::live) {
-	run_program::run('/sbin/modprobe', $_, @{$options{$_}}) 
-	  or die "insmod'ing module $_ failed" foreach @l;
-    } else {
-	load_raw(map { [ $_ => $options{$_} ] } @l);
-    }
-    sleep 2 if grep { /^(usb-storage|mousedev|printer)$/ } @l;
-
-    if ($network_module) {
-	add_alias($_, $network_module) foreach difference2([ detect_devices::getNet() ], \@network_devices);
-    }
-    when_load($_, @{$options{$_}}) foreach @l;
-}
-
-sub unload {
-    if ($::testing) {
-	log::l("rmmod $_") foreach @_;
-    } else {
-	run_program::run("rmmod", $_) foreach @_;
-    }
-}
-
-sub load_category {
-    my ($category, $wait_message, $probe_type) = @_;
-
-    #- probe_category returns the PCMCIA cards. It doesn't know they are already
-    #- loaded, so:
-    read_already_loaded();
-
-    my @try_modules = (
-      if_($category =~ /scsi/,
-	  if_(arch() !~ /ppc/, 'imm', 'ppa'),
-	  if_(detect_devices::usbStorage(), 'usb-storage'),
-      ),
-      if_(arch() =~ /ppc/, 
-	  if_($category =~ /scsi/, 'mesh', 'mac53c94'),
-	  if_($category =~ /net/, 'bmac', 'gmac', 'mace'),
-	  if_($category =~ /sound/, 'dmasound_awacs'),
-      ),
-    );
-    grep {
-	$wait_message->($_->{description}, $_->{driver}) if $wait_message;
-	eval { load([ $_->{driver}, $_->{options} ]) };
-	$_->{error} = $@;
-
-	!($@ && $_->{try});
-    } probe_category($category, $probe_type),
-      map {; { driver => $_, description => $_, try => 1 } } @try_modules;
-}
-
-sub probe_category {
-    my ($category, $probe_type) = @_;
-
-    my @modules = category2modules($category);
-
-    grep {
-	if ($category eq 'isdn') {
-	    my $b = $_->{driver} =~ /ISDN:([^,]*),?([^,]*),?(.*)/;
-	    if ($b) {
-		$_->{driver} = $1;
-		$_->{options} = $2;
-		$_->{firmware} = $3;
-		$_->{firmware} =~ s/firmware=//;
-		$_->{driver} eq "hisax" and $_->{options} .= " id=HiSax";
-	    }
-	    $b;
-	} else {
-	    member($_->{driver}, @modules);
-	}
-    } detect_devices::probeall($probe_type);
-}
-
-sub load_ide {
-    eval { load("ide-cd"); }
-}
-
-
-#-###############################################################################
-#- modules.conf functions
-#-###############################################################################
-sub get_alias {
-    my ($alias) = @_;
-    $conf{$alias}{alias};
-}
-sub get_options {
-    my ($name) = @_;
-    $conf{$name}{options};
-}
-sub set_options {
-    my ($name, $new_option) = @_;
-    $conf{$name}{options} = $new_option;
-}
-sub add_alias { 
-    my ($alias, $module) = @_;
-    $module =~ /ignore/ and return;
-    /\Q$alias/ && $conf{$_}{alias} && $conf{$_}{alias} eq $module and return $_ foreach keys %conf;
-    log::l("adding alias $alias to $module");
-    $conf{$alias}{alias} ||= $module;
-    $conf{$module}{above} = 'snd-pcm-oss' if $module =~ /^snd-/;
-    $alias;
-}
-sub add_probeall {
-    my ($alias, $module) = @_;
-
-    my $l = $conf{$alias}{probeall} ||= [];
-    push @$l, $module;
-    log::l("setting probeall scsi_hostadapter to @$l");
-}
-
-sub remove_alias($) {
-    my ($name) = @_;
-    foreach (keys %conf) {
-	$conf{$_}{alias} && $conf{$_}{alias} eq $name or next;
-	delete $conf{$_}{alias};
-	return 1;
-    }
-    0;
-}
-
-sub read_conf {
-    my ($file) = @_;
-    my %c;
-
-    foreach (cat_($file)) {
-	next if /^\s*#/;
-	my ($type, $alias, $val) = split(/\s+/, chomp_($_), 3) or next;
-
-	$val = [ split ' ', $val ] if $type eq 'probeall';
-
-	$c{$alias}{$type} = $val;
-    }
-    #- cheating here: not handling aliases of aliases
-    while (my ($k, $v) = each %c) {
-	if (my $a = $v->{alias}) {
-	    local $c{$a}{alias};
-	    delete $v->{probeall};
-	    add2hash($c{$a}, $v);
-	}
-    }
-    #- convert old aliases to new probeall
-    foreach my $name ('scsi_hostadapter', 'usb-interface') {
-	my @old_aliases = 
-	  map { $_->[0] } sort { $a->[1] <=> $b->[1] } 
-	  map { if_(/^$name(\d*)/ && $c{$_}{alias}, [ $_, $1 || 0 ]) } keys %c;
-	foreach my $alias (@old_aliases) {
-	    push @{$c{$name}{probeall} ||= []}, delete $c{$alias}{alias};
-	}
-    }
-
-    \%c;
-}
-
-sub mergein_conf {
-    my ($file) = @_;
-    my $modconfref = read_conf($file);
-    while (my ($key, $value) = each %$modconfref) {
-	$conf{$key}{alias} = $value->{alias} if !exists $conf{$key}{alias};
-	push @{$conf{$key}{probeall} ||= []}, deref($value->{probeall});
-    }
-}
-
-sub write_conf {
-    my ($prefix) = @_;
-
-    my $file = "$prefix/etc/modules.conf";
-    rename "$prefix/etc/conf.modules", $file; #- make the switch to new name if needed
-
-    #- Substitute new aliases in modules.conf (if config has changed)
-    substInFile {
-	my ($type,$alias,$module) = split(/\s+/, chomp_($_), 3);
-	if ($type eq 'post-install' && $alias eq 'supermount') {	    
-	    #- remove the post-install supermount stuff.
-	    $_ = '';
-	} elsif ($type eq 'alias' && $alias =~ /scsi_hostadapter|usb-interface/) {
-	    #- remove old aliases which are replaced by probeall
-	    $_ = '';
-	} elsif (
-	    $conf{$alias}{$type}  &&
-	    $conf{$alias}{$type} ne $module)  {
-	    my $v = join(' ', uniq(deref($conf{$alias}{$type})));
-	    $_ = "$type $alias $v\n";
-	}
-    } $file;
-
-    my $written = read_conf($file);
-
-    local *F;
-    open F, ">> $file" or die("cannot write module config file $file: $!\n");
-    while (my ($mod, $h) = each %conf) {
-	while (my ($type, $v) = each %$h) {
-	    my $v2 = join(' ', uniq(deref($v)));
-	    print F "$type $mod $v2\n" 
-	      if $v2 && !$written->{$mod}{$type};
-	}
-    }
-    my @l = ();
-    push @l, 'scsi_hostadapter' if !is_empty_array_ref($conf{scsi_hostadapter}{probeall});
-    push @l, 'bttv' if grep { $_->{driver} eq 'bttv' } detect_devices::probeall();
-    append_to_etc_modules($prefix, @l);
-}
-
-sub append_to_etc_modules {
-    my ($prefix, @l) = @_;
-    my $l = join '|', map { '^\s*'.$_.'\s*$' } @l;
-    log::l("to put in modules ", join(", ", @l));
-
-    substInFile { 
-	$_ = '' if $l && /$l/;
-	$_ .= join '', map { "$_\n" } @l if eof;
-    } "$prefix/etc/modules";
-}
-
-sub read_stage1_conf {
-    mergein_conf($_[0]);
-}
-
-#-###############################################################################
-#- pcmcia various
-#-###############################################################################
-sub configure_pcmcia {
-    my ($pcic) = @_;
-
-    #- try to setup pcmcia if cardmgr is not running.
-    my $running if 0;
-    return if $running;
-    $running = 1;
-
-    if (c::kernel_version() =~ /^2\.2/) {
-	my $msg = _("PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel.");
-	log::l($msg);
-	return $msg;
-    }
-
-    log::l("i try to configure pcmcia services");
-
-    symlink "/tmp/stage2/$_", $_ foreach "/etc/pcmcia";
-
-    eval {
-	load("pcmcia_core");
-	load($pcic);
-	load("ds");
-    };
-
-    #- run cardmgr in foreground while it is configuring the card.
-    run_program::run("cardmgr", "-f", "-m" ,"/modules");
-    sleep(3);
-    
-    #- make sure to be aware of loaded module by cardmgr.
-    read_already_loaded();
-}
-
-sub write_pcmcia {
-    my ($prefix, $pcmcia) = @_;
-
-    #- should be set after installing the package above otherwise the file will be renamed.
-    setVarsInSh("$prefix/etc/sysconfig/pcmcia", {
-	PCMCIA    => bool2yesno($pcmcia),
-	PCIC      => $pcmcia,
-	PCIC_OPTS => "",
-        CORE_OPTS => "",
-    });
-}
-
-
-#-###############################################################################
-#- internal functions
-#-###############################################################################
-sub loaded_modules { 
-    map { /(\S+)/ } cat_("/proc/modules");
-}
-sub read_already_loaded { 
-    when_load($_) foreach reverse loaded_modules();
-}
-
-sub when_load {
-    my ($name, @options) = @_;
-    my $category = module2category($name);
-
-    if ($category =~ m,disk/(scsi|hardware_raid|usb),) {
-	add_probeall('scsi_hostadapter', $name);
-	eval { load('sd_mod') };
-    }
-    add_alias('sound-slot-0', $name) if $category =~ /sound/;
-    load('snd-pcm-oss') if $name =~ /^snd-/;
-    add_probeall('usb-interface', $name) if $name =~ /usb-[uo]hci/ || $name eq 'ehci-hcd';
-    $conf{$name}{options} = join " ", @options if @options;
-}
-
-sub cz_file { 
-    "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz-" . c::kernel_version();
-}
-
-sub extract_modules {
-    my ($dir, @modules) = @_;
-    my $cz = cz_file();
-    if (!-e $cz) {
-	unlink $_ foreach glob_("/lib/modules*.cz*");
-	require install_any;
-        install_any::getAndSaveFile("Mandrake/mdkinst$cz", $cz) or die "failed to get modules $cz: $!";
-    }
-    eval {
-	require packdrake;
-	my $packer = new packdrake($cz, quiet => 1);
-	$packer->extract_archive($dir, map { "$_.o" } @modules);
-    };
-}
-
-sub load_raw {
-    my @l = @_;
-
-    extract_modules('/tmp', map { $_->[0] } @l);
-    my @failed = grep {
-	my $m = "/tmp/$_->[0].o";
-	if (-e $m && run_program::run(["/usr/bin/insmod_", "insmod"], '2>', '/dev/tty5', $m, @{$_->[1]})) {
-	    unlink $m;
-	    '';
-	} else {
-	    log::l("missing module $_->[0]") if !-e $m;
-	    -e $m;
-	}
-    } @l;
-
-    die "insmod'ing module " . join(", ", map { $_->[0] } @failed) . " failed" if @failed;
-
-    foreach (@l) {
-	if ($_->[0] =~ /usb-[uo]hci/) {
-	    eval {
-		require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-		#- ensure keyboard is working, the kernel must do the job the BIOS was doing
-		sleep 2;
-		load("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	    }
-	}
-    }
-}
-
-
-
-1;
diff --git a/perl-install/mouse.pm b/perl-install/mouse.pm
deleted file mode 100644
index 1ff8c106b..000000000
--- a/perl-install/mouse.pm
+++ /dev/null
@@ -1,565 +0,0 @@
-package mouse; # $Id$
-
-#use diagnostics;
-#use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use detect_devices;
-use run_program;
-use devices;
-use modules;
-use any;
-use log;
-
-my @mouses_fields = qw(nbuttons MOUSETYPE XMOUSETYPE name);
-
-my %mice = 
- arch() =~ /^sparc/ ? 
-(
- 'sunmouse' =>
- [ [ 'sunmouse' ],
-   [ [ 3, 'sun', 'sun', __("Sun - Mouse") ]
-   ]]
-) :
-(
- 'PS/2' => 
- [ [ 'psaux' ],
-   [ [ 2, 'ps/2', 'PS/2', __("Standard") ],
-     [ 5, 'ps/2', 'MouseManPlusPS/2', __("Logitech MouseMan+") ],
-     [ 5, 'imps2', 'IMPS/2', __("Generic PS2 Wheel Mouse") ],
-     [ 5, 'ps/2', 'GlidePointPS/2', __("GlidePoint") ],
-     '',
-     [ 5, 'ps/2', 'ThinkingMousePS/2', __("Kensington Thinking Mouse") ],
-     [ 5, 'netmouse', 'NetMousePS/2', __("Genius NetMouse") ],
-     [ 5, 'netmouse', 'NetScrollPS/2', __("Genius NetScroll") ],
-   ]],
-     
- 'USB' =>
- [ [ 'usbmouse' ],
-   [ if_(arch() eq 'ppc', [ 1, 'ps/2', 'PS/2', __("1 button") ]),
-     [ 2, 'ps/2', 'PS/2', __("Generic 2 Button Mouse") ],
-     [ 3, 'ps/2', 'PS/2', __("Generic") ],
-     [ 5, 'ps/2', 'IMPS/2', __("Wheel") ],
-   ]],
-
- __("serial") =>
- [ [ map { "ttyS$_" } 0..3 ],
-   [ [ 2, 'Microsoft', 'Microsoft', __("Generic 2 Button Mouse") ],
-     [ 3, 'Microsoft', 'Microsoft', __("Generic 3 Button Mouse") ],
-     [ 5, 'ms3', 'IntelliMouse', __("Microsoft IntelliMouse") ],
-     [ 3, 'MouseMan', 'MouseMan', __("Logitech MouseMan") ],
-     [ 2, 'MouseSystems', 'MouseSystems', __("Mouse Systems") ],     
-     '',
-     [ 3, 'logim', 'MouseMan', __("Logitech CC Series") ],
-     [ 5, 'pnp', 'IntelliMouse', __("Logitech MouseMan+/FirstMouse+") ],
-     [ 5, 'ms3', 'IntelliMouse', __("Genius NetMouse") ],
-     [ 2, 'MMSeries', 'MMSeries', __("MM Series") ],
-     [ 2, 'MMHitTab', 'MMHittab', __("MM HitTablet") ],
-     [ 3, 'Logitech', 'Logitech', __("Logitech Mouse (serial, old C7 type)") ],
-     [ 3, 'Microsoft', 'ThinkingMouse', __("Kensington Thinking Mouse") ],
-   ]],
-
- __("busmouse") =>
- [ [ arch() eq 'ppc' ? 'adbmouse' : ('atibm', 'inportbm', 'logibm') ],
-   [ if_(arch() eq 'ppc', [ 1, 'Busmouse', 'BusMouse', __("1 button") ]),
-     [ 2, 'Busmouse', 'BusMouse', __("2 buttons") ],
-     [ 3, 'Busmouse', 'BusMouse', __("3 buttons") ],
-   ]],
-
- __("none") =>
- [ [ 'none' ],
-   [ [ 0, 'none', 'Microsoft', __("No mouse") ],
-   ]],
-);
-
-
-sub xmouse2xId { 
-    #- xmousetypes must be sorted as found in /usr/include/X11/extensions/xf86misc.h
-    #- so that first mean "0", etc
-    my @xmousetypes = (
-		   "Microsoft",
-		   "MouseSystems",
-		   "MMSeries",
-		   "Logitech",
-		   "BusMouse", #MouseMan,
-		   "Logitech",
-		   "PS/2",
-		   "MMHittab",
-		   "GlidePoint",
-		   "IntelliMouse",
-		   "ThinkingMouse",
-		   "IMPS/2",
-		   "ThinkingMousePS/2",
-		   "MouseManPlusPS/2",
-		   "GlidePointPS/2",
-		   "NetMousePS/2",
-		   "NetScrollPS/2",
-		   "SysMouse",
-		   "Auto",
-		   "AceCad",
-		   "WSMouse",
-		   "USB",
-    );
-    my ($id) = @_;
-    $id = 'BusMouse' if $id eq 'MouseMan';
-    my $i; map_index { $_ eq $id and $i = $::i } @xmousetypes; $i;
-}
-
-my %mouse_btn_keymap = (
-    0   => "NONE",
-    67  => "F9",
-    68  => "F10",
-    87  => "F11",
-    88  => "F12",
-    85  => "F13",
-    89  => "F14",
-    90  => "F15",
-    56  => "L-Option/Alt",
-    125 => "L-Command",
-    98  => "Num: /",
-    55  => "Num: *",
-    117 => "Num: =",
-);
-sub ppc_one_button_keys { keys %mouse_btn_keymap }
-sub ppc_one_button_key2text { $mouse_btn_keymap{$_[0]} }
-
-sub raw2mouse {
-    my ($type, $raw) = @_;
-    $raw or return;
-
-    my %l; @l{@mouses_fields} = @$raw;
-    +{ %l, type => $type };
-}
-
-sub update_type_name {
-    my ($mouse) = @_;
-    while (my ($k, $v) = each %mice) {
-	$mouse->{device} =~ /usb/ && $k ne 'USB' and next; #- avoid mixing USB and PS/2 mice.
-	foreach (@{$v->[1]}) {
-	    if ($_->[0] == $mouse->{nbuttons} && $_->[2] eq $mouse->{XMOUSETYPE}) {
-		add2hash($mouse, { MOUSETYPE => $_->[1],
-				   type      => $k,
-				   name      => $_->[3],
-				 });
-		return $mouse;
-	    }
-	}
-    }
-}
-
-sub fullnames { 
-    map_each { 
-	my $type = $::a;
-	grep {$_} map {
-	    if ($_) {
-		my $l = raw2mouse($type, $_);
-		"$type|$l->{name}";
-	    } else { 
-		$type .= "|[" . _("Other") . "]";
-		'';
-	    }
-	} @{$::b->[1]}
-    } %mice;
-}
-
-sub fullname2mouse {
-    my ($fname, %opts) = @_;
-    my ($type, @l) = split '\|', $fname;
-    my ($name) = pop @l;
-  search:
-    $opts{device} ||= $mice{$type}[0][0];
-    foreach (@{$mice{$type}[1]}) {
-	my $l = raw2mouse($type, $_);
-	$name eq $l->{name} and return { %$l, %opts };
-    }
-    if ($name eq '1 Button') {
-	$name = "Generic 2 Button Mouse";
-	goto search;
-    }
-    die "$fname not found ($type, $name)";
-}
-
-sub serial_ports() { map { "ttyS$_" } 0..7 }
-sub serial_port2text {
-    $_[0] =~ /ttyS(\d+)/ ? "$_[0] / COM" . ($1 + 1) : $_[0];
-}
-
-sub read {
-    my ($prefix) = @_;
-    my %mouse = getVarsFromSh "$prefix/etc/sysconfig/mouse";
-    eval { add2hash_(\%mouse, fullname2mouse($mouse{FULLNAME})) };
-    $mouse{device} = readlink "$prefix/dev/mouse" or log::l("reading $prefix/dev/mouse symlink failed");
-    $mouse{nbuttons} = $mouse{XEMU3} eq "yes" ? 2 : $mouse{WHEEL} eq "yes" ? 5 : 3;
-    \%mouse;
-}
-
-sub write {
-    my ($prefix, $mouse) = @_;
-    local $mouse->{FULLNAME} = qq("$mouse->{type}|$mouse->{name}"); #-"
-    local $mouse->{XEMU3} = bool2yesno($mouse->{nbuttons} < 3);
-    local $mouse->{WHEEL} = bool2yesno($mouse->{nbuttons} > 3);
-    setVarsInSh("$prefix/etc/sysconfig/mouse", $mouse, qw(MOUSETYPE XMOUSETYPE FULLNAME XEMU3 WHEEL device));
-    any::devfssymlinkf ($mouse->{device}, 'mouse', $prefix) or log::l("creating $prefix/dev/mouse symlink failed");
-    $mouse->{auxmouse} and any::devfssymlinkf ($mouse->{auxmouse}{device}, 'mouse1', $prefix) or log::l("creating $prefix/dev/mouse1 symlink failed");
-
-    if (arch() =~ /ppc/) {
-	my $s = join('',
-	  "dev.mac_hid.mouse_button_emulation = " . to_bool($mouse->{button2_key} || $mouse->{button3_key}) . "\n",
-	  if_($mouse->{button2_key}, "dev.mac_hid.mouse_button2_keycode = $mouse->{button2_key}\n"),
-	  if_($mouse->{button3_key}, "dev.mac_hid.mouse_button3_keycode = $mouse->{button3_key}\n"),
-	);
-	substInFile { 
-	    $_ = '' if /^\Qdev.mac_hid.mouse_button/;
-	    $_ .= $s if eof;
-	} "$prefix/etc/sysctl.conf";
-	#- hack - dev RPM symlinks to mouse0 - lands on mouse1 with new input layer on PPC input/mice will get both ADB and USB
-	symlinkf "/dev/input/mice", "$prefix/dev/usbmouse" if ($mouse->{device} eq "usbmouse");    
-    }
-}
-
-sub mouseconfig {
-    my ($t, $mouse, @wacom);
-
-    #- Whouah! probing all devices from ttyS0 to ttyS3 once a time!
-    detect_devices::probeSerialDevices();
-
-    #- check new probing methods keep everything used here intact!
-    foreach (0..3) {
-	$t = detect_devices::probeSerial("/dev/ttyS$_");
-	if ($t->{CLASS} eq 'MOUSE') {
-	    $t->{MFG} ||= $t->{MANUFACTURER};
-
-	    $mouse = fullname2mouse("serial|Microsoft IntelliMouse") if $t->{MFG} eq 'MSH' && $t->{MODEL} eq '0001';
-	    $mouse = fullname2mouse("serial|Logitech MouseMan") if $t->{MFG} eq 'LGI' && $t->{MODEL} =~ /^80/;
-	    $mouse = fullname2mouse("serial|Genius NetMouse") if $t->{MFG} eq 'KYE' && $t->{MODEL} eq '0003';
-
-	    $mouse ||= fullname2mouse("serial|Generic 2 Button Mouse"); #- generic by default.
-	    $mouse->{device} = "ttyS$_";
-	    last;
-	} elsif ($t->{CLASS} eq "PEN" || $t->{MANUFACTURER} eq "WAC") {
-	    push @wacom, "ttyS$_";
-	}
-    }
-    $mouse, @wacom;
-}
-
-sub detect() {
-    if (arch() =~ /^sparc/) {
-	return fullname2mouse("sunmouse|Sun - Mouse");
-    }
-    if (arch() eq "ppc") {
-        return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? 
-			      "USB|1 button" :
-			      # No need to search for an ADB mouse.  If I did, the PPC kernel would
-			      # find one whether or not I had one installed!  So..  default to it.
-			      "busmouse|1 button");
-    }
-
-    my @wacom;
-    my $fast_mouse_probe = sub {
-	my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
-
-	if (modules::get_alias("usb-interface")) {
-	    if (my (@l) = detect_devices::usbMice()) {
-		log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
-		eval { modules::load(qw(hid mousedev usbmouse)) };
-		if (!$@ && detect_devices::tryOpen("usbmouse")) {
-		    my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
-		    $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
-		    return $mouse;
-		}
-		eval { modules::unload(qw(usbmouse mousedev hid)) };
-	    }
-	}
-	$auxmouse;
-    };
-
-    if (modules::get_alias("usb-interface")) {
-	my $keep_mouse;
-	if (my (@l) = detect_devices::usbWacom()) {
-	    log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
-	    eval { modules::load("wacom", "evdev"); };
-	    unless ($@) {
-		foreach (0..$#l) {
-		    detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
-		}
-	    }
-	    $keep_mouse or eval { modules::unload("evdev", "wacom"); };
-	}
-    }
-
-    #- at this level, not all possible mice are detected so avoid invoking serial_probe
-    #- which takes a while for its probe.
-    if ($::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$mouse and return ($mouse, @wacom);
-    }
-
-    #- probe serial device to make sure a wacom has been detected.
-    eval { modules::load("serial") };
-    my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
-
-    if (!$::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
-	$r and return ($r, @wacom);
-	$mouse and return ($mouse, @wacom);
-    } else {
-	$r and return ($r, @wacom);
-    }
-
-    #- in case only a wacom has been found, assume an inexistant mouse (necessary).
-    @wacom and return { CLASS      => 'MOUSE',
-			nbuttons   => 2,
-			device     => "nothing",
-			MOUSETYPE  => "Microsoft",
-			XMOUSETYPE => "Microsoft"}, @wacom;
-
-    if (!modules::get_alias("usb-interface") && detect_devices::is_a_recent_computer() && $::isInstall && !$::noauto) {
-	#- special case for non detected usb interface on a box with no mouse.
-	#- we *must* find out if there really is no usb, otherwise the box may
-	#- not be accessible via the keyboard (if the keyboard is USB)
-	#- the only way to know this is to make a full pci probe
-	modules::load_category('bus/usb', '', 'unsafe'); 
-	if (my $mouse = $fast_mouse_probe->()) {
-	    return $mouse;
-	}
-    }
-
-    #- defaults to generic serial mouse on ttyS0.
-    #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
-    return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
-}
-
-#- write_conf : write the mouse infos into the Xconfig files.
-#- input :
-#-  $mouse : the hashtable containing the informations
-#- $mouse input
-#-  $mouse->{nbuttons} : number of buttons : integer
-#-  $mouse->{device} : device of the mouse : string : ex 'psaux'
-#-  $mouse->{XMOUSETYPE} : type of the mouse for gpm : string : ex 'PS/2'
-#-  $mouse->{type} : type (generic ?) of the mouse : string : ex 'PS/2'
-#-  $mouse->{name} : name of the mouse : string : ex 'Standard'
-#-  $mouse->{MOUSETYPE} : type of the mouse : string : ex "ps/2"
-#-  $mouse->{XEMU3} : emulate 3rd button : string : 'yes' or 'no'
-sub write_conf {
-    my ($mouse) = @_;
-
-    &write('', $mouse);
-    modules::write_conf('') if $mouse->{device} eq "usbmouse" && !$::testing;
-
-    my $f = "/etc/X11/XF86Config";
-    my $g = "/etc/X11/XF86Config-4";
-
-    my $update_mouse = sub {
-	my ($mouse) = @_;
-
-	my ($zaxis, $zaxis_aux) = map { [
-					 $_->{nbuttons} > 3 ? [ "ZAxisMapping", "4 5" ] : (),
-					 $_->{nbuttons} > 5 ? [ "ZAxisMapping", "6 7" ] : (),
-					 $_->{nbuttons} < 3 ? ([ "Emulate3Buttons" ], [ "Emulate3Timeout", "50" ]) : ()
-					] } grep { $_ } ($mouse, $mouse->{auxmouse});
-
-	my ($str_zaxis, $str_zaxis_aux) = map { join('', map { qq(\n    $_->[0]) . ($_->[1] && qq( $_->[1])) } @$_)
-					    } grep { $_ } ($zaxis, $zaxis_aux);
-	my $found_auxmouse = 0;
-	substInFile {
-	    if (/^Section\s+"Pointer"/ .. /^EndSection/) {
-		$_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		s|^(\s*Protocol\s+).*|$1"$mouse->{XMOUSETYPE}"|;
-		s|^(\s*Device\s+).*|$1"/dev/$mouse->{device}"$str_zaxis|;
-	    }
-	    if ($mouse->{auxmouse}) {
-		if (/DeviceName\s+"Mouse2"/ .. /^EndSection/) {
-		    $found_auxmouse = 1;
-		    $_ = '' if /(ZAxisMapping|Emulate3|AlwaysCore)/; #- remove existing line
-		    s|^(\s*Protocol\s+).*|$1"$mouse->{auxmouse}{XMOUSETYPE}"|;
-		    s|^(\s*Device\s+).*|$1"/dev/$mouse->{auxmouse}{device}"\n        AlwaysCore$str_zaxis_aux|;
-		}
-	    }
-	} $f if -e $f && !$::testing;
-	substInFile {
-	    if (my $l = /^Section\s+"Pointer"/ .. /^EndSection/) {
-		$l =~ /E/ and $_ .= qq(
-
-Section "XInput"
-    SubSection "Mouse"
-        DeviceName "Mouse2"
-        Protocol   "$mouse->{auxmouse}{XMOUSETYPE}"
-        Device     "/dev/$mouse->{auxmouse}{device}"
-        AlwaysCore$str_zaxis_aux
-    EndSubSection
-EndSection
-);
-	    }
-	} $f if !$found_auxmouse && $mouse->{auxmouse} && -e $f && !$::testing;
-
-	($str_zaxis, $str_zaxis_aux) = map { join('', map { qq(\n    Option "$_->[0]") . ($_->[1] && qq( "$_->[1]")) } @$_)
-					 } grep { $_ } ($zaxis, $zaxis_aux);
-	$found_auxmouse = 0;
-	substInFile {
-	    if (/Identifier\s+"Mouse1"/ .. /^EndSection/) {
-		$_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		s|^(\s*Option\s+"Protocol"\s+).*|$1"$mouse->{XMOUSETYPE}"|; #"
-		s|^(\s*Option\s+"Device"\s+).*|$1"/dev/mouse"$str_zaxis|;
-	    }
-	    if ($mouse->{auxmouse}) {
-		if (/Identifier\s+"Mouse2"/ .. /^EndSection/) {
-		    $found_auxmouse = 1;
-		    $_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
-		    s|^(\s*Option\s+"Protocol"\s+).*|$1"$mouse->{auxmouse}{XMOUSETYPE}"|; #"
-		    s|^(\s*Option\s+"Device"\s+).*|$1"/dev/$mouse->{auxmouse}{device}"$str_zaxis_aux|; #"
-		}
-	    }
-	} $g if -e $g && !$::testing;
-	substInFile {
-	    if (my $l = /Identifier\s+"Mouse1"/ .. /^EndSection/) {
-		$l =~ /E/ and $_ .= qq(
-
-Section "InputDevice"
-    Identifier "Mouse2"
-    Option     "Protocol" "$mouse->{auxmouse}{XMOUSETYPE}"
-    Option     "Device"   "/dev/$mouse->{auxmouse}{XMOUSETYPE}"$str_zaxis_aux
-EndSection
-);
-	    }
-	} $g if !$found_auxmouse && $mouse->{auxmouse} && -e $g && !$::testing;
-    };
-    $update_mouse->($mouse);
-}
-
-sub test_mouse_install {
-    my ($mouse) = @_;
-    require my_gtk;
-    my_gtk->import(qw(:wrappers :helpers));
-    my $w = my_gtk->new;
-    my ($width, $height, $offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25);
-    my $darea = new Gtk::DrawingArea;
-    $darea->set_events([ 'button_press_mask', 'button_release_mask' ]);  #$darea must be unrealized.
-    gtkadd($w->{window},
-  	   gtkpack(my $vbox_grab = new Gtk::VBox(0,0),
-		   gtksize(gtkset_usize($darea, $width+1, $height+1), $width+1, $height+1),
-		   my $okcancel = gtkset_sensitive(create_okcancel($w, '', '', "edge"), 1)
-		  ),
-	  );
-    $okcancel->set_uposition(7, $height-43);
-    Gtk->timeout_add(2000, sub { gtkset_sensitive($okcancel, 1); $okcancel->draw(undef); });
-    test_mouse($mouse, $w, $darea, $width, $height);
-    $w->{window}->set_usize(undef, $height+10);
-    $w->sync; # HACK
-    Gtk::Gdk->pointer_grab($darea->window, 1,
-			   [ 'pointer_motion_mask'],
-			   $darea->window, undef ,0);
-    $w->main;
-}
-
-sub test_mouse_standalone {
-    my ($mouse, $hbox) = @_;
-    require my_gtk;
-    my_gtk->import(qw(:wrappers));
-    my ($width, $height, $offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25);
-    my $darea = new Gtk::DrawingArea;
-    $darea->set_events([ 'button_press_mask', 'button_release_mask' ]);  #$darea must be unrealized.
-    gtkpack($hbox,
-	    gtkpack(gtkset_border_width(new Gtk::VBox(0,10), 10),
-		    gtksize(gtkset_usize($darea, $width+1, $height+1), $width, $height)
-		   )
-	   );
-    test_mouse($mouse, $hbox, $darea, $width, $height);
-}
-
-sub test_mouse {
-    my ($mouse, $w, $darea, $width, $height) = @_;
-
-    $darea->realize();
-    my $wait = 0;
-    my ($m3_image, $m3_mask) = gtkcreate_xpm('mouse_3b.xpm');
-    my ($m3_imagep, $m3_maskp) = gtkcreate_xpm('mouse_3b+.xpm');
-    my ($m3_left, $m3_left_mask) = gtkcreate_xpm('mouse_left.xpm');
-    my ($m3_right, $m3_right_mask) = gtkcreate_xpm('mouse_right.xpm');
-    my ($m3_middle, $m3_middle_mask) = gtkcreate_xpm('mouse_middle.xpm');
-    my ($aru, $aru_mask) = gtkcreate_xpm('arrow_up.xpm');
-    my ($ard, $ard_mask) = gtkcreate_xpm('arrow_down.xpm');
-    my $image = $m3_image;
-    $mouse->{nbuttons} > 3 and $image = $m3_imagep;
-    my $draw_text = sub {
-  	my ($t, $y) = @_;
-  	my $font = $darea->style->font;
-  	my $w = $font->string_width($t);
-  	$darea->window->draw_string($font, $darea->style->black_gc, ($darea->allocation->[2]-$width)/2 + ($width - $w) / 2, ($darea->allocation->[3]-$height)/2 + $y, $t);
-    };
-    my $drawarea; $drawarea = sub { $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-								 $image, 0, 0,
-								 ($darea->allocation->[2]-$width)/2, ($darea->allocation->[3]-$height)/2,
-								 210, 350);
-				    $draw_text->(_("Please test the mouse"), $height - 120);
-				    $draw_text->(_("To activate the mouse,"), $height - 105) if $mouse->{XMOUSETYPE} eq 'IMPS/2';
-				    $draw_text->(_("MOVE YOUR WHEEL!"), $height - 90) if $mouse->{XMOUSETYPE} eq 'IMPS/2';
-				    return if $::isStandalone;
-				    $darea->window->draw_rectangle($darea->style->bg_gc('normal'), 1, 0, $height-65, $width, $height);
-				};
-
-    my $paintButton = sub {
-	my ($nb, $pressed) = @_;
-	my $x = 60 + $nb*33;
-	$drawarea->();
-	if ($nb == 0) {
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_left, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+31, ($darea->allocation->[3]-$height)/2 + 52,
-					 59, 91);
-	} elsif ($nb == 2) {
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_right, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+117, ($darea->allocation->[3]-$height)/2 + 52,
-					 61, 91);
-	} elsif ($nb == 1) {
-	    if ($mouse->{nbuttons} > 3) {
-		$darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					     $m3_middle, 0, 0,
-					     ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					     13, 62);
-	    } else {
-  		$darea->window->draw_arc ( $darea->style->black_gc,
-  					   1, ($darea->allocation->[2]-$width)/2 + $x, ($darea->allocation->[3]-$height)/2 + 90, 20, 25,
-  					   0, 360*64);
-	    }
-	} elsif ($nb == 3) {
-	    $wait=1;
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $aru, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+102, ($darea->allocation->[3]-$height)/2 + 57,
-					 6, 8);
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_middle, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					 13, 62);
-	    Gtk->timeout_add(200, sub { $wait = 0 });
-	} elsif ($nb == 4) {
-	    $wait=1;
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $ard, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+102, ($darea->allocation->[3]-$height)/2 + 131,
-					 6, 8);
-	    $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
-					 $m3_middle, 0, 0,
-					 ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
-					 13, 62);
-	    Gtk->timeout_add(200, sub { $wait = 0 });
-	}
-    };
-    $darea->signal_connect(button_press_event => sub {
-  			       my $b = $_[1]{button};
-			       $paintButton->($b - 1);
-  			   });
-    $darea->signal_connect(button_release_event => sub {
-			       while ($wait) { my_gtk::flush() }
-			       $drawarea->()
-  			   });
-    $darea->signal_connect(expose_event => sub { $drawarea->() });
-    $darea->size($width, $height);
-}
diff --git a/perl-install/my_gtk.pm b/perl-install/my_gtk.pm
deleted file mode 100644
index 0c777d519..000000000
--- a/perl-install/my_gtk.pm
+++ /dev/null
@@ -1,1323 +0,0 @@
-package my_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $border);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    helpers => [ qw(create_okcancel createScrolledWindow create_menu create_notebook create_packtable create_hbox create_vbox create_adjustment create_box_with_title create_treeitem) ],
-    wrappers => [ qw(gtksignal_connect gtkradio gtkpack gtkpack_ gtkpack__ gtkpack2 gtkpack3 gtkpack2_ gtkpack2__ gtkpowerpack gtkset_editable gtksetstyle gtkset_text gtkcombo_setpopdown_strings gtkset_tip gtkappenditems gtkappend gtkset_shadow_type gtkset_layout gtkset_relief gtkadd gtkput gtktext_insert gtkset_usize gtksize gtkset_justify gtkset_active gtkset_sensitive gtkset_modal gtkset_border_width gtkmove gtkresize gtkshow gtkhide gtkdestroy gtkcolor gtkset_mousecursor gtkset_mousecursor_normal gtkset_mousecursor_wait gtkset_background gtkset_default_fontset gtkctree_children gtkxpm gtkpng create_pix_text get_text_coord fill_tiled gtkicons_labels_widget write_on_pixmap gtkcreate_xpm gtkcreate_png gtkbuttonset) ],
-    ask => [ qw(ask_warn ask_okcancel ask_yesorno ask_from_entry) ],
-);
-$EXPORT_TAGS{all} = [ map { @$_ } values %EXPORT_TAGS ];
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-use Gtk;
-use Gtk::Gdk::ImlibImage;
-use c;
-use log;
-use common;
-
-my $forgetTime = 1000; #- in milli-seconds
-$border = 5;
-
-#-###############################################################################
-#- OO stuff
-#-###############################################################################
-sub new {
-    my ($type, $title, %opts) = @_;
-
-    Gtk->init;
-    Gtk::Gdk::ImlibImage->init;
-    Gtk->set_locale;
-    my $o = bless { %opts }, $type;
-    $o->_create_window($title);
-    while (my $e = shift @tempory::objects) { $e->destroy }
-    foreach (@interactive::objects) {
-	$_->{rwindow}->set_modal(0) if $_->{rwindow}->can('set_modal');
-    }
-    push @interactive::objects, $o if !$opts{no_interactive_objects};
-    $o->{rwindow}->set_position('center_always') if $::isStandalone;
-    $o->{rwindow}->set_modal(1) if $my_gtk::grab || $o->{grab};
-    
-    if ($::isWizard && !$my_gtk::pop_it) {
-	$o->{window} = new Gtk::VBox(0,0);
-	$o->{window}->set_border_width($::Wizard_splash ? 0 : 10);
-	$o->{rwindow} = $o->{window};
-	if (!defined($::WizardWindow)) {
-	    $::WizardWindow = new Gtk::Window;
-	    $::WizardWindow->set_position('center_always');
-	    $::WizardWindow->signal_connect(delete_event => sub { die 'wizcancel'});
-	    $::WizardTable = new Gtk::Table(2, 2, 0);
-	    $::WizardWindow->add($::WizardTable);
-	    my $draw1 = new Gtk::DrawingArea;
-	    $draw1->set_usize(540,100);
-	    my $draw2 = new Gtk::DrawingArea;
-	    $draw2->set_usize(100,300);
-	    my ($im_up, $mask_up) = gtkcreate_png($::Wizard_pix_up || "wiz_default_up.png");
-	    my ($y1, $x1) = $im_up->get_size;
-	    my ($im_left, $mask_left) = gtkcreate_png($::Wizard_pix_left || "wiz_default_left.png");
-	    my ($y2, $x2) = $im_left->get_size;
-	    my $style = $draw1->style->copy();
-	    $style->font(Gtk::Gdk::Font->fontset_load("-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*"));
-	    my $w = $style->font->string_width($::Wizard_title);
-	    $draw1->signal_connect(expose_event => sub {
-				       my $i;
-				       for ($i=0;$i<(540/$y1);$i++) {
-					   $draw1->window->draw_pixmap ($draw1->style->bg_gc('normal'),
-									$im_up, 0, 0, 0, $y1*$i,
-									$x1 , $y1 );
-					   $draw1->window->draw_string(
-								       $style->font,
-								       $draw1->style->white_gc,
-								       140+(380-$w)/2, 62,
-								       ($::Wizard_title) );
-				       }
-				   });
-	    $draw2->signal_connect(expose_event => sub {
-				       my $i;
-				       for ($i=0;$i<(300/$y2);$i++) {
-					   $draw2->window->draw_pixmap ($draw2->style->bg_gc('normal'),
-									$im_left, 0, 0, 0, $y2*$i,
-									$x2 , $y2 );
-				       }
-				   });
-	    $::WizardTable->attach($draw1, 0, 2, 0, 1, 'fill', 'fill', 0, 0);
-	    #- $::WizardTable->attach($draw2, 0, 1, 1, 2, 'fill', 'fill', 0, 0);
-	    $::WizardTable->set_usize(540,400);
-	    $::WizardWindow->show_all;
-	    flush();
-	}
-	$::WizardTable->attach($o->{window}, 0, 2, 1, 2, [-fill, -expand], [-fill, -expand], 0, 0);
-    }
-
-    if ($::isEmbedded && !$my_gtk::pop_it && !eval { $::Plug->child }) {
-	$o->{window} = new Gtk::HBox(0,0);
-	$o->{rwindow} = $o->{window};
-	$::Plug ||= new Gtk::Plug ($::XID);
-	$::Plug->show;
-	flush();
-	$::Plug->add($o->{window});
-    }
-    $::CCPID and kill "USR2", $::CCPID;
-    $o;
-}
-sub main {
-    my ($o, $completed, $canceled) = @_;
-    gtkset_mousecursor_normal();
-    my $timeout = Gtk->timeout_add(1000, sub { gtkset_mousecursor_normal(); 1 });
-    my $b = before_leaving { Gtk->timeout_remove($timeout) };
-    $o->{rwindow}->window->set_events(['key_press_mask', 'key_release_mask', 'exposure_mask']) if $o->{rwindow}->window;
-    $o->show;
-
-    do {
-	local $::setstep = 1;
-	Gtk->main;
-    } while ($o->{retval} ? $completed && !$completed->() : $canceled && !$canceled->());
-    $o->destroy;
-    $o->{retval}
-}
-sub show($) {
-    my ($o) = @_;
-    $o->{window}->show;
-    $o->{rwindow}->show;
-}
-sub destroy($) {
-    my ($o) = @_;
-    $o->{rwindow}->destroy;
-    gtkset_mousecursor_wait();
-    flush();
-}
-sub DESTROY { goto &destroy }
-sub sync {
-    my ($o) = @_;
-    show($o);
-    flush();
-}
-sub flush {
-    Gtk->main_iteration while Gtk->events_pending;
-}
-
-sub gtkshow($)         { $_[0]->show; $_[0] }
-sub gtkhide($)         { $_[0]->hide; $_[0] }
-sub gtkdestroy($)      { $_[0] and $_[0]->destroy }
-sub gtkset_usize($$$)  { $_[0]->set_usize($_[1],$_[2]); $_[0] }
-sub gtksize($$$)       { $_[0]->size($_[1],$_[2]); $_[0] }
-sub gtkset_justify($$) { $_[0]->set_justify($_[1]); $_[0] }
-sub gtkset_active($$)  { $_[0]->set_active($_[1]); $_[0] }
-sub gtkset_modal       { $_[0]->set_modal($_[1]); $_[0] }
-sub gtkset_sensitive   { $_[0]->set_sensitive($_[1]); $_[0] }
-sub gtkset_border_width{ $_[0]->set_border_width($_[1]); $_[0] }
-sub gtkmove { $_[0]->window->move($_[1], $_[2]); $_[0] }
-sub gtkresize { $_[0]->window->resize($_[1], $_[2]); $_[0] }
-
-sub gtksignal_connect($@) {
-    my $w = shift;
-    $w->signal_connect(@_);
-    $w
-}
-
-sub gtkradio {
-    my $def = shift;
-    my $radio;
-    map { $radio = new Gtk::RadioButton($_, $radio ? $radio : ());
-	  $radio->set_active($_ eq $def); $radio } @_;
-}
-
-sub gtkpack_($@) { gtkpowerpack('arg', 1, @_) }
-sub gtkpack($@) { gtkpowerpack(1, 1, @_) }
-sub gtkpack__($@) { gtkpowerpack(0, 1, @_) }
-sub gtkpack2_($@) { gtkpowerpack('arg', 0, @_) }
-sub gtkpack2($@) { gtkpowerpack(1, 0, @_) }
-sub gtkpack2__($@) { gtkpowerpack(0, 0, @_) }
-sub gtkpack3 { gtkpowerpack($a?1:0, 0, @_) }
-
-sub gtkpowerpack {
-    #- Get Default Attributes (if any). 2 syntaxes allowed :
-    #- gtkpowerpack( {expand => 1, fill => 0}, $box...) : the attributes are picked from a specified hash ref
-    #- gtkpowerpack(1,0,1, $box, ...) : the attributes are picked from the non-ref list, in the order (expand, fill, padding, pack_end).
-    my $RefDefaultAttrs;
-    if (ref($_[0]) eq 'HASH') { $RefDefaultAttrs = shift }
-    elsif (!ref($_[0])) {
-	$RefDefaultAttrs = {};
-	foreach ("expand", "fill", "padding", "pack_end") {
-	    !ref($_[0]) ? $RefDefaultAttrs->{$_} = shift : last
-	}
-    }
-    my $box = shift;
-
-    while (@_) {
-	#- Get attributes (if specified). 4 syntaxes allowed (default values are undef ie. false...) :
-	#- gtkpowerpack({defaultattrs}, $box, $widget1, $widget2, ...) : the attrs are picked from the default ones (if they exist)
-	#- gtkpowerpack($box, {fill=>1, expand=>0, ...}, $widget1, ...) : the attributes are picked from a specified hash ref
-	#- gtkpowerpack($box, [1,0,1], $widget1, ...) : the attributes are picked from the array ref : (expand, fill, padding, pack_end).
-	#- gtkpowerpack({attr=>'arg'}, $box, 1, $widget1, 0, $widget2, etc...) : the 'arg' value will tell gtkpowerpack to always read the 
-	#- attr value directly in the arg list (avoiding confusion between value 0 and Gtk::Label("0"). That can simplify some writings but
-	#- this arg(s) MUST then be present...
-	my %attr;
-	my $RefAttrs;
-	ref($_[0]) eq 'HASH' || ref($_[0]) eq 'ARRAY' and $RefAttrs = shift;
-	foreach ("expand", "fill", "padding", "pack_end") {
-	    if ($RefDefaultAttrs->{$_} eq 'arg') {
-		ref ($_[0]) and die "error in packing definition\n";
-		$attr{$_} = shift;
-		ref($RefAttrs) eq 'ARRAY' and shift @$RefAttrs;
-	    } elsif (ref($RefAttrs) eq 'HASH' && defined($RefAttrs->{$_})) {
-		$attr{$_} = $RefAttrs->{$_};
-	    } elsif (ref($RefAttrs) eq 'ARRAY') {
-		$attr{$_} = shift @$RefAttrs;
-	    } elsif (defined($RefDefaultAttrs->{$_})) {
-		$attr{$_} = int $RefDefaultAttrs->{$_};
-	    } else {
-		$attr{$_} = 0;
-	    }
-	}
-	#- Get and pack the widget (create it if necessary when it is a label...)
-	my $widget = ref($_[0]) ? shift : new Gtk::Label(shift);
-	if ($attr{pack_end}) { $box->pack_end($widget, $attr{expand}, $attr{fill}, $attr{padding})}
-	else { $box->pack_start($widget, $attr{expand}, $attr{fill}, $attr{padding}) }
-	$widget->show;
-    }
-    $box
-}
-
-sub gtkset_editable {
-    my ($w, $e) = @_;
-    $w->set_editable($e);
-    $w;
-}
-
-sub gtksetstyle {
-    my ($w, $s) = @_;
-    $w->set_style($s);
-    $w;
-}
-
-sub gtkset_text {
-    my ($w, $s) = @_;
-    $w->set_text($s);
-    $w;
-}
-
-sub gtkcombo_setpopdown_strings ($@) {
-    my $w = shift;
-    $w->set_popdown_strings(@_);
-    $w;
-}
-
-sub gtkappend_text {
-    my ($w, $s) = @_;
-    $w->append_text($s);
-    $w;
-}
-
-sub gtkprepend_text {
-    my ($w, $s) = @_;
-    $w->prepend_text($s);
-    $w;
-}
-
-sub gtkset_tip {
-    my ($tips, $w, $tip) = @_;
-    $tips->set_tip($w, $tip) if $tip;
-    $w;
-}
-
-sub gtkappenditems {
-    my $w = shift;
-    map {gtkshow($_) } @_;
-    $w->append_items(@_);
-    $w
-}
-
-sub gtkappend($@) {
-    my $w = shift;
-    foreach (@_) {
-	my $l = $_;
-	ref $l or $l = new Gtk::Label($l);
-	$w->append($l);
-	$l->show;
-    }
-    $w
-}
-
-sub gtkset_shadow_type {
-    $_[0]->set_shadow_type($_[1]);
-    $_[0];
-}
-
-sub gtkset_layout {
-    $_[0]->set_layout($_[1]);
-    $_[0];
-}
-
-sub gtkset_relief {
-    $_[0]->set_relief($_[1]);
-    $_[0];
-}
-
-sub gtkadd($@) {
-    my $w = shift;
-    foreach (@_) {
-	my $l = $_;
-	ref $l or $l = new Gtk::Label($l);
-	$w->add($l);
-	$l->show;
-    }
-    $w
-}
-sub gtkput {
-    my ($w, $w2, $x, $y) = @_;
-    $w->put($w2, $x, $y);
-    $w2->show;
-    $w
-}
-
-sub gtktext_insert {
-    my ($w, $t) = @_;
-    $w->freeze;
-    $w->backward_delete($w->get_length);
-    $w->insert(undef, undef, undef, $t); 
-    #- DEPRECATED? needs \n otherwise in case of one line text the beginning is not shown (even with the vadj->set_value)
-    $w->set_word_wrap(1);
-#-    $w->vadj->set_value(0);
-    $w->thaw;
-    $w;
-}
-
-sub gtkroot {
-    Gtk->init;
-    Gtk->set_locale;
-    Gtk::Gdk::Window->new_foreign(Gtk::Gdk->ROOT_WINDOW);
-}
-
-sub gtkcolor {
-    my ($r, $g, $b) = @_;
-
-    my $color = bless { red => $r, green => $g, blue => $b }, 'Gtk::Gdk::Color';
-    gtkroot()->get_colormap->color_alloc($color);
-}
-
-sub gtkset_mousecursor {
-    my ($type, $w) = @_;
-    ($w || gtkroot())->set_cursor(Gtk::Gdk::Cursor->new($type));
-}
-sub gtkset_mousecursor_normal { gtkset_mousecursor(68, @_) }
-sub gtkset_mousecursor_wait   { gtkset_mousecursor(150, @_) }
-
-sub gtkset_background {
-    my ($r, $g, $b) = @_;
-
-    my $root = gtkroot();
-    my $gc = Gtk::Gdk::GC->new($root);
-
-    my $color = gtkcolor($r, $g, $b);
-    $gc->set_foreground($color);
-    $root->set_background($color);
-
-    my ($h, $w) = $root->get_size;
-    $root->draw_rectangle($gc, 1, 0, 0, $w, $h);
-}
-
-sub gtkset_default_fontset {
-    my ($fontset) = @_;
-
-    my $style = Gtk::Widget->get_default_style;
-    my $f = Gtk::Gdk::Font->fontset_load($fontset) or die '';
-    $style->font($f);
-    Gtk::Widget->set_default_style($style);
-}
-
-sub gtkctree_children {
-    my ($node) = @_;
-    my @l;
-    $node or return;
-    for (my $p = $node->row->children; $p; $p = $p->row->sibling) {
-	push @l, $p;
-    }
-    @l;
-}
-
-my @icon_paths = ($ENV{SHARE_PATH}, "$ENV{SHARE_PATH}/icons", "$ENV{SHARE_PATH}/libDrakX/pixmaps", "/usr/lib/libDrakX/icons", "pixmaps", 'standalone/icons');
-
-sub add_icon_path { @icon_paths = uniq(@icon_paths, @_) }
-
-sub gtkcreate_xpm {
-    my ($f) = @_;
-    my $rw = gtkroot();
-    $f =~ m|.xpm$| or $f="$f.xpm";
-    if ( $f !~ /\//) { -e "$_/$f" and $f="$_/$f", last foreach @icon_paths }
-    my @l = Gtk::Gdk::Pixmap->create_from_xpm($rw, new Gtk::Style->bg('normal'), $f) or die "gtkcreate_xpm: missing pixmap file $f";
-    @l;
-}
-
-sub gtkcreate_png {
-    my ($f) = shift;
-    $f =~ m|.png$| or $f="$f.png";
-    if ( $f !~ /\//) { -e "$_/$f" and $f="$_/$f", last foreach @icon_paths }
-    my $im = Gtk::Gdk::ImlibImage->load_image($f) or die "gtkcreate_png: missing png file $f";
-    $im->render($im->rgb_width, $im->rgb_height);
-    ($im->move_image(), $im->move_mask);
-}
-
-sub gtkbuttonset {
-    my ($button, $str) = @_;
-    $button->child->destroy;
-    $button->add(gtkshow(new Gtk::Label $str));
-    $button;
-}
-
-sub xpm_d { my $w = shift; Gtk::Gdk::Pixmap->create_from_xpm_d($w->window, undef, @_) }
-sub gtkxpm { new Gtk::Pixmap(gtkcreate_xpm(@_)) }
-sub gtkpng { new Gtk::Pixmap(gtkcreate_png(@_)) }
-
-sub create_pix_text {
-    #ref widget, txt, color_txt, [font], [width], [height], flag1, flag2, [background, backsize x y], centeredx, centeredy, bold
-    my ($w, $text, $color_text, $font, $max_width, $max_height, $can_be_greater, $can_be_smaller, $background, $x_back, $y_back, $centeredx, $centeredy, $bold) = @_;
-    my $color_background;
-    my $backpix;
-    if ($color_text =~ /#(\d+)#(\d+)#(\d+)/) { $color_text = gtkcolor(map{$_*65535/255}($1, $2, $3)) }
-    if (ref($background) eq 'Gtk::Gdk::Color') { $color_background = $background }
-    elsif ($background =~ /#(\d+)#(\d+)#(\d+)/) { $color_background = gtkcolor(map{$_*65535/255}($1, $2, $3)) }
-    elsif (ref($background) eq 'Gtk::Gdk::Pixmap' && $x_back && $y_back) { $backpix = 1 }
-    my $fake_darea = new Gtk::DrawingArea;
-    my $style= $fake_darea->style->copy();
-    if (ref($font) eq 'Gtk::Gdk::Font') {
-	$style->font($font);
-    } else {
-	$font and $style->font(Gtk::Gdk::Font->fontset_load($font));
-    }
-    $fake_darea->set_style($style);
-    my ($width, $height, $lines, $widths, $heights) = get_text_coord (
-        $text, $fake_darea, $max_width, $max_height, $can_be_greater, $can_be_smaller, $centeredx, $centeredy);
-    my $pix = new Gtk::Gdk::Pixmap($w->window, $width, $height);
-
-    if ($backpix) {
-	fill_tiled($w, $pix, $background, $x_back, $y_back, $width, $height);
-    } else {
-	$color_background ||= gtkcolor(65535, 65535, 65535);
-	my $gc_background = new Gtk::Gdk::GC($w->window);
-	$gc_background->set_foreground($color_background);
-	$pix->draw_rectangle($gc_background, 1, 0, 0, $width, $height);
-    }
-    $color_text ||= gtkcolor(0, 0, 0);
-    my $gc_text = new Gtk::Gdk::GC($w->window);
-    $gc_text->set_foreground($color_text);
-    my $i = 0;
-    foreach (@{$lines}) {
-	$pix->draw_string($style->font, $gc_text, ${$widths}[$i], ${$heights}[$i], $_);
-	$bold and $pix->draw_string($style->font, $gc_text, ${$widths}[$i] + 1, ${$heights}[$i], $_);
-	$i++;
-    }
-    ($pix, $width, $height);
-}
-
-sub get_text_coord {
-
-    my ($text, $widget4style, $max_width, $max_height, $can_be_greater, $can_be_smaller, $centeredx, $centeredy, $wrap_char) = @_;
-
-    $wrap_char ||= ' ';
-    my $idx = 0;
-    my $real_width = 0;
-    my $real_height = 0;
-    my @lines;
-    my @widths;
-    my @heights;
-    my $height_elem = $widget4style->style->font->ascent + $widget4style->style->font->descent;
-    $heights[0] = 0;
-    my $max_width2 = $max_width;
-    my $height = $heights[0] = $height_elem;
-    my $width = 0;
-    my $flag = 1;
-    my @t = split($wrap_char, $text);
-    my @t2;
-    if ($::isInstall && $::o->{lang} =~ /ja|zh/) {
-	@t = map { $_ . $wrap_char } @t;
-	$wrap_char = '';
-	foreach (@t) {
-	    my @c = split('');
-	    my $i = 0;
-	    my $el = '';
-	    while (1) {
-		$i >= @c and last;
-		$el .= $c[$i];
-		if (ord($c[$i]) >= 128) { $el .= $c[$i+1]; $i++; push @t2, $el; $el = ''}
-		$i++;
-	    }
-	    $el ne '' and push @t2, $el;
-	}
-    } else {
-	@t2 = @t;
-    }
-    foreach (@t2) {
-	my $l = $widget4style->style->font->string_width($_ . (!$flag ? $wrap_char : ''));
-	if ($width + $l > $max_width2 && !$flag) {
-	    $flag = 1;
-	    $height += $height_elem + 1;
-	    $heights[$idx+1] = $height;
-	    $widths[$idx] = $centeredx && !$can_be_smaller ? (max($max_width2-$width, 0))/2 : 0;
-	    $width = 0;
-	    $idx++;
-	}
-	$lines[$idx] = $flag ? "$_" : $lines[$idx] . $wrap_char . "$_";
-	$width += $l;
-	$flag = 0;
-	$l <= $max_width2 or $max_width2 = $l;
-	$width <= $real_width or $real_width = $width;
-    }
-    $height += $height_elem;
-    $widths[$idx] = $centeredx && !$can_be_smaller ? (max($max_width2-$width, 0))/2 : 0;
-
-    $height < $real_height or $real_height = $height;
-    $width = $max_width;
-    $height = $max_height;
-    $real_width < $max_width && $can_be_smaller and $width = $real_width;
-    $real_width > $max_width && $can_be_greater and $width = $real_width;
-    $real_height < $max_height && $can_be_smaller and $height = $real_height;
-    $real_height > $max_height && $can_be_greater and $height = $real_height;
-    if ($centeredy) {
- 	my $dh = ($height-$real_height)/2 + ($height_elem)/2;
- 	@heights = map { $_ + $dh } @heights;
-    }
-    ($width, $height, \@lines, \@widths, \@heights)
-}
-
-sub fill_tiled {
-    my ($w, $pix, $bitmap, $x_back, $y_back, $width, $height) = @_;
-    my ($x2, $y2) = (0, 0);
-    while (1) {
-	$x2 = 0;
-	while (1) {
-	    $pix->draw_pixmap($w->style->bg_gc('normal'),
-			      $bitmap, 0, 0, $x2, $y2, $x_back, $y_back);
-	    $x2 += $x_back;
-	    $x2 >= $width and last;
-	}
-	$y2 += $y_back;
-	$y2 >= $height and last;
-    }
-}
-
-sub gtkicons_labels_widget {
-    my ($args, $w, $color_text, $widget_for_font, $background, $x_back, $y_back, $x_round,
-	$y_round, $x_back2, $y_back2, $icon_width, $icon_height, $exec_func, $exec_hash) = @_;
-
-    my @tab;
-    my $i = 0;
-    my $cursor_hand = new Gtk::Gdk::Cursor 60;
-    my $cursor_normal = new Gtk::Gdk::Cursor 68;
-    foreach (@$args) {
-	my $label = $_->[0];
-	my $dbl_area;
-	my $darea = new Gtk::DrawingArea;
-        my ($icon, undef) = gtkcreate_png($_->[1]);
-	my ($icon_h, undef) = gtkcreate_png("$_->[1]_highlight");
-	$darea->{state} = 0;
-	$darea->signal_connect(expose_event => sub {
-                  my ($dx, $dy) = ($darea->allocation->[2], $darea->allocation->[3]);
-                  if (!defined($dbl_area) || $darea->{state} != $dbl_area->{state}) {
-		      my $state = $darea->{state};
-                      my ($pix, $width, $height) = create_pix_text($darea, $label, $color_text, $widget_for_font->style->font, $x_round, 1,
-                                                               1, 0, $background, $x_back2, $y_back2, 1, 0, $state);
-                      ($dx, $dy) = (max($width, $x_round), $y_round + $height);
-                      $darea->set_usize($dx, $dy);
-                      $dbl_area = new Gtk::Gdk::Pixmap($darea->window, max($width, $x_round), $y_round + $height);
-		      $dbl_area->{state} = $darea->{state};
-                      fill_tiled($darea, $dbl_area, $background, $x_back2, $y_back2, $dx, $dy);
-                      $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
-                                             $darea->{state} ? $icon_h : $icon, 0, 0, ($dx - $icon_width)/2, 0, $icon_width, $icon_height);
-                      $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
-                                             $pix, 0, 0, ($dx - $width)/2, $y_round, $width, $height);
-#                      $dbl_area->draw_rectangle($darea->style->black_gc, 0,
-#						0, 0, max($width, $x_round) - 1 , $y_round + $height - 1);
-                  }
-                  $darea->window->draw_pixmap($darea->style->bg_gc('normal'),
-                                              $dbl_area, 0, 0, 0, 0, $dx, $dy);
-#		  $darea->window->draw_rectangle($darea->style->black_gc, 0,
-#						0, 0, $dx, $dy);
-                  ($darea->{dx}, $darea->{dy}) = ($dx, $dy);
-              });
-	$darea->set_events(['exposure_mask', 'enter_notify_mask', 'leave_notify_mask', 'button_press_mask', 'button_release_mask' ]);
-	$darea->signal_connect( enter_notify_event => sub {
-				    if ($darea->{state} == 0) {
-					$darea->{state} = 1;
-					$darea->draw(undef);
-				    }
-				});
-	$darea->signal_connect( leave_notify_event => sub {
-				    if ($darea->{state} == 1) {
-					$darea->{state} = 0;
-					$darea->draw(undef);
-				    }
-				});
-	my $label_exec = $_->[0];
-	$darea->signal_connect( button_release_event => sub {
-				    $darea->{state} = 0;
-				    $darea->draw(undef);
-				    $exec_func->($exec_hash->{$label_exec});
-#				    $exec_hash->{$label_exec}{function}->($exec_hash->{$label_exec}{arg});
-				});
-	$darea->signal_connect( realize => sub { $darea->window->set_cursor($cursor_hand) });
-	$tab[$i] = $darea;
-	$i++;
-    }
-    my $fixed = new Gtk::Fixed;
-    foreach (@tab) { $fixed->put($_, 75, 65) }
-    my $redraw_function = sub { 
-	$fixed->move(@$_) foreach compute_icons($fixed->allocation->[2], $fixed->allocation->[3], 40, 15, 20, @tab);
-    };
-    $fixed->signal_connect(expose_event => $redraw_function );
-    $fixed->signal_connect(realize => sub {
-			       $fixed->window->set_back_pixmap($background, 0);
-			       $redraw_function->();
-			   });
-    $fixed->{redraw_function} = $redraw_function;
-    $fixed->show_all();
-    my $w_ret = createScrolledWindow($fixed, ['automatic', 'automatic']);
-
-    #- Ugly hacks, don't touch! ########
-    my $timeout2 = Gtk->timeout_add(100, sub { $fixed->set_usize($w_ret->allocation->[2] - 22, 0); 0; });
-    $w_ret->vscrollbar->set_usize(19, undef);
-    gtkset_border_width($w_ret, -2); #- ok, this is very very ugly...
-}
-
-sub ctree_set_icon {
-    my ($tree, $node, $icon_pixmap, $icon_mask) = @_;
-
-    my ($text, $spacing, undef, undef, undef, undef, $isleaf, $expanded) = $tree->get_node_info($node);
-    $tree->set_node_info($node, $text, $spacing, $icon_pixmap, $icon_mask, $icon_pixmap, $icon_mask, $isleaf, $expanded);
-}
-
-sub compute_icons {
-    my ($fx, $fy, $decx, $decy, $interstice, @tab) = @_;
-    my $nb = $#tab;
-    my $nb_sav = $nb;
-    my $index = 0;
-    my @dx2;
-    my @dx;
-    my @dy;
-    my $line_up = 0;
-  bcl_init:
-    @dx2 = undef;
-  bcl:
-    @dx = map{ $_->{dx} } @tab[$index..$index+$nb];
-    $dy[$index] = max(map{ $_->{dy} } @tab[$index..$index+$nb]);
-    foreach (0..$#dx) {
-	if ($dx[$_] > $dx2[$_]) { $dx2[$_] = $dx[$_] } else { $dx[$_] = $dx2[$_] }
-    }
-    my $line_size = 0;
-    $line_size = $decx + sum(@dx2) + $nb * $interstice;
-    if ($line_size > $fx) {
-	$index = 0; $nb--; goto bcl_init;
-    }
-    $nb and $line_up = ($fx-$line_size)/($nb+2);
-    $index += $nb+1;
-    $index <= $#tab and goto bcl;
-    my @ret;
-    my $n = 0;
-    my $y = $decy;
-    my $x = $decx/2 + $line_up;
-    foreach (0..$nb_sav) {
-	$ret[$_] = [$tab[$_], $x, $y];
-	$x += $dx2[$n] + $interstice + $line_up;
-	$n++;
-	if ($n > $nb) {
-	    $n = 0;
-	    $x = $decx/2 + $line_up;
-	    $y += int($dy[$_-$nb]/5)*5 + 15;
-	}
-    }
-    @ret;
-}
-
-sub write_on_pixmap {
-    my ($pixmap, $x_pos, $y_pos, @text)=@_;
-    my ($gdkpixmap, $gdkmask) = $pixmap->get();
-    my ($width, $height) = (440, 250);
-    my $gc = Gtk::Gdk::GC->new(gtkroot());
-    $gc->set_foreground(gtkcolor(8448, 17664, 40191)); #- in hex : 33, 69, 157
-
-    my $darea= new Gtk::DrawingArea();
-    $darea->size($width, $height);
-    $darea->set_usize($width, $height);
-    my $draw = sub {
-	my $style = new Gtk::Style;
-	#- i18n : you can change the font.
-	$style->font(Gtk::Gdk::Font->fontset_load(_("-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*")));
-	my $y_pos2= $y_pos;
-  	foreach (@text) {
-  	    $darea->window->draw_string($style->font, $gc, $x_pos, $y_pos2, $_);
-  	    $y_pos2 += 20;
-  	}
-    };
-    $darea->signal_connect(expose_event => sub { $darea->window->draw_rectangle($darea->style->white_gc, 1, 0, 0, $width, $height);
-						 $darea->window->draw_pixmap
-						   ($darea->style->white_gc,
-						    $gdkpixmap, 0, 0,
-						    ($darea->allocation->[2]-$width)/2, ($darea->allocation->[3]-$height)/2,
-						    $width, $height);
-						 &$draw();
-					     });
-    $darea;
-}
-
-sub n_line_size {
-    my ($nbline, $type, $widget) = @_;
-    my $font = $widget->style->font;
-    my $spacing = ${{ text => 0, various => 17 }}{$type};
-    $nbline * ($font->ascent + $font->descent + $spacing) + 8;
-}
-
-#-###############################################################################
-#- createXXX functions
-
-#- these functions return a widget
-#-###############################################################################
-
-sub create_okcancel {
-    my ($w, $ok, $cancel, $spread, @other) = @_;
-    my $one = ($ok xor $cancel);
-    $spread ||= $::isWizard ? "end" : "spread";
-    $ok ||= $::isWizard ? ($::Wizard_finished ? _("Finish") : _("Next ->")) : _("Ok");
-    $cancel ||= $::isWizard ? _("<- Previous") : _("Cancel");
-    my $b1 = gtksignal_connect($w->{ok} = new Gtk::Button($ok), clicked => $w->{ok_clicked} || sub { $w->{retval} = 1; Gtk->main_quit });
-    my $b2 = !$one && gtksignal_connect($w->{cancel} = new Gtk::Button($cancel), clicked => $w->{cancel_clicked} || sub { log::l("default cancel_clicked"); undef $w->{retval}; Gtk->main_quit });
-    $::isWizard and gtksignal_connect($w->{wizcancel} = new Gtk::Button(_("Cancel")), clicked => sub { die 'wizcancel' });
-    my @l = grep { $_ } $::isWizard ? ($w->{wizcancel}, $::Wizard_no_previous ? () : $b2, $b1): ($b1, $b2);
-    push @l, map { gtksignal_connect(new Gtk::Button($_->[0]), clicked => $_->[1]) } @other;
-
-    $_->can_default($::isWizard) foreach @l;
-    gtkadd(create_hbox($spread), @l);
-}
-
-sub create_box_with_title($@) {
-    my $o = shift;
-
-    my $nbline = sum(map { round(length($_) / 60 + 1/2) } map { split "\n" } @_);
-    $o->{box} = new Gtk::VBox(0,0);
-    $o->{box_size} = n_line_size($nbline, 'text', $o->{box});
-    if (@_ <= 2 && $nbline > 4) {
-	$o->{icon} && !$::isWizard and 
-	  eval { gtkpack__($o->{box}, gtkset_border_width(gtkpack_(new Gtk::HBox(0,0), 1, gtkpng($o->{icon})),5)) };
-	my $wanted = $o->{box_size};
-	$o->{box_size} = min(200, $o->{box_size});
-	my $has_scroll = $o->{box_size} < $wanted;
-
-	my $wtext = new Gtk::Text;
-	$wtext->can_focus($has_scroll);
-	chomp(my $text = join("\n", @_));
-	my $scroll = createScrolledWindow(gtktext_insert($wtext, $text));
-	$scroll->set_usize(400, $o->{box_size});
-	gtkpack__($o->{box}, $scroll);
-    } else {
-	my $a = !$::no_separator;
-	undef $::no_separator;
-	if ($o->{icon} && !$::isWizard) {
-	    gtkpack__($o->{box},
-		      gtkpack_(new Gtk::HBox(0,0),
-			       0, gtkset_usize(new Gtk::VBox(0,0), 15, 0),
-			       0, eval { gtkpng($o->{icon}) },
-			       0, gtkset_usize(new Gtk::VBox(0,0), 15, 0),
-			       1, gtkpack_($o->{box_title} = new Gtk::VBox(0,0),
-					   1, new Gtk::HBox(0,0),
-					   (map {
-					       my $w = ref $_ ? $_ : new Gtk::Label($_);
-					       $::isWizard and $w->set_justify("left");
-					       $w->set_name("Title");
-					       (0, $w);
-					   } map { ref $_ ? $_ : warp_text($_) } @_),
-					   1, new Gtk::HBox(0,0),
-					  )
-			      ),
-		      if_($a, new Gtk::HSeparator)
-		     )
-	} else {
-	    gtkpack__($o->{box},
-		      (map {
-			  my $w = ref $_ ? $_ : new Gtk::Label($_);
-			  $::isWizard and $w->set_justify("left");
-			  $w->set_name("Title");
-			  $w;
-		      } map { ref $_ ? $_ : warp_text($_) } @_),
-		      if_($a, new Gtk::HSeparator)
-		     )
-	}
-    }
-}
-
-sub createScrolledWindow {
-    my ($W, $policy) = @_;
-    my $w = new Gtk::ScrolledWindow(undef, undef);
-    $policy ||= [ 'automatic', 'automatic'];
-    $w->set_policy(@{$policy});
-    member(ref $W, qw(Gtk::CList Gtk::CTree Gtk::Text)) ?
-      $w->add($W) :
-      $w->add_with_viewport($W);
-    $W->can("set_focus_vadjustment") and $W->set_focus_vadjustment($w->get_vadjustment);
-    $W->show;
-    $w
-}
-
-sub create_menu($@) {
-    my $title = shift;
-    my $w = new Gtk::MenuItem($title);
-    $w->set_submenu(gtkshow(gtkappend(new Gtk::Menu, @_)));
-    $w
-}
-
-sub add2notebook {
-    my ($n, $title, $book) = @_;
-
-    my ($w1, $w2) = map { new Gtk::Label($_) } $title, $title;
-    $book->{widget_title} = $w1;
-    $n->append_page_menu($book, $w1, $w2);
-    $book->show;
-    $w1->show;
-    $w2->show;
-}
-
-sub create_notebook(@) {
-    my $n = new Gtk::Notebook;
-    add2notebook($n, splice(@_, 0, 2)) while @_;
-    $n
-}
-
-sub create_adjustment($$$) {
-    my ($val, $min, $max) = @_;
-    new Gtk::Adjustment($val, $min, $max + 1, 1, ($max - $min + 1) / 10, 1);
-}
-
-sub create_packtable($@) {
-    my ($options, @l) = @_;
-    my $w = new Gtk::Table(0, 0, $options->{homogeneous} || 0);
-    map_index {
-	my ($i, $l) = ($_[0], $_);
-	map_index {
-	    my ($j) = @_;
-	    if ($_) {
-		ref $_ or $_ = new Gtk::Label($_);
-		$j != $#$l ?
-		  $w->attach($_, $j, $j + 1, $i, $i + 1, 'fill', 'fill', 5, 0) :
-		  $w->attach($_, $j, $j + 1, $i, $i + 1, 1|4, ref($_) eq 'Gtk::ScrolledWindow' ? 1|4 : 0, 0, 0);
-		$_->show;
-	    }
-	} @$l;
-    } @l;
-    $w->set_col_spacings($options->{col_spacings} || 0);
-    $w->set_row_spacings($options->{row_spacings} || 0);
-    $w
-}
-
-sub create_hbox {
-    my $w = gtkset_border_width(new Gtk::HButtonBox, 3);
-    $w->set_layout($_[0] || "spread");
-    $w;
-}
-sub create_vbox {
-    my $w = new Gtk::VButtonBox;
-    $w->set_layout(-spread);
-    $w;
-}
-
-
-sub _create_window($$) {
-    my ($o, $title) = @_;
-    my $w = new Gtk::Window;
-    my $gc = Gtk::Gdk::GC->new(gtkroot());
-    !$::isStandalone && !$::live && !$::g_auto_install and $my_gtk::shape_width = 3;
-#-  $gc->set_foreground(gtkcolor(8448, 17664, 40191)); #- in hex : 33, 69, 157
-    $gc->set_foreground(gtkcolor(5120, 10752, 22784)); #- in hex : 20, 42, 89
-#-    $gc->set_foreground(gtkcolor(16896, 16896, 16896)); #- in hex : 66, 66, 66
-    my $inner = gtkadd(my $f_ = gtkset_shadow_type(new Gtk::Frame(undef), 'out'),
-		       my $f = gtkset_border_width(gtkset_shadow_type(new Gtk::Frame(undef), 'none'), 3)
-		      );
-    my $table;
-    if ($::isStandalone || $::live || $::g_auto_install || $::noShadow) { gtkadd($w, $inner) } else {
-	my $sqw = $my_gtk::shape_width;
-	gtkadd($w, $table = new Gtk::Table(2, 2, 0));
-	$table->attach( $inner, 0, 1, 0, 1, 1|4, 1|4, 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, $sqw, 1), expose_event => sub {
-					      $_[0]->window->draw_rectangle($_[0]->style->bg_gc('normal'), 1, 0, 0, $sqw, $sqw);
-					      $_[0]->window->draw_rectangle($gc, 1, 0, $sqw, $sqw, $_[0]->allocation->[3]);
-					  }),
-			1, 2, 0, 1, 'fill', 'fill', 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, 1, $sqw), expose_event => sub {
-					      $_[0]->window->draw_rectangle($_[0]->style->bg_gc('normal'), 1, 0, 0, $sqw, $sqw);
-					      $_[0]->window->draw_rectangle($gc, 1, $sqw, 0, $_[0]->allocation->[2], $sqw);
-					  }),
-			0, 1, 1, 2, 'fill', 'fill', 0, 0);
-	$table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, $sqw, $sqw), expose_event => sub {
-					      $_[0]->window->draw_rectangle($gc, 1, 0, 0, $sqw, $sqw);
-					  }),
-			1, 2, 1, 2, 'fill', 'fill', 0, 0);
-	$table->show_all;
-    }
-    $w->set_name("Title");
-    $w->set_title($title);
-
-    $w->signal_connect(expose_event => sub { eval { $interactive::objects[-1]{rwindow} == $w and $w->window->XSetInputFocus } }) if $my_gtk::force_focus || $o->{force_focus};
-    $w->signal_connect(delete_event => sub { $w->destroy; die 'wizcancel' });
-    $w->set_uposition(@{$my_gtk::force_position || $o->{force_position}}) if $my_gtk::force_position || $o->{force_position};
-
-    my $focusing;
-    $w->signal_connect(focus => sub { 
-        return 1 if $focusing;
-	$focusing = 1;
-	Gtk->idle_add(sub { $w->ensure_focus($_[0]); $focusing = 0; 0 }, $_[1]);
-    }) if $w->can('ensure_focus');
-
-    if ($::o->{mouse}{unsafe}) {
-	$w->set_events("pointer_motion_mask");
-	my $signal;
-	$signal = $w->signal_connect(motion_notify_event => sub {
-	    delete $::o->{mouse}{unsafe};
-	    log::l("unsetting unsafe mouse");
-	    $w->signal_disconnect($signal);
-	});
-    }
-    $w->signal_connect(key_press_event => sub {
-	my $d = ${{ 0xffbe => 'help',
-		    0xffbf => 'screenshot',
-	            0xffc9 => 'next',
-		    0xffc8 => 'previous' }}{$_[1]{keyval}};
-
-	if ($d eq "help") {
-	    require install_gtk;
-	    install_gtk::create_big_help($::o);
-	} elsif ($::isInstall && $d eq 'screenshot') {
-	    common::take_screenshot($o);
-	} elsif (chr($_[1]{keyval}) eq 'e' && $_[1]{state} & 8) {
-	    log::l("Switching to " . ($::expert ? "beginner" : "expert"));
-	    $::expert = !$::expert;
-	} elsif ($d) {
-	    #- previous field is created here :(
-	    my $s; foreach (reverse @{$::o->{orderedSteps}}) {
-		$s->{previous} = $_ if $s;
-		$s = $::o->{steps}{$_};
-	    }
-	    $s = $::o->{step};
-	    do { $s = $::o->{steps}{$s}{$d} } until !$s || $::o->{steps}{$s}{reachable};
-	    $::setstep && $s and die "setstep $s\n";
-	}
-    });# if $::isInstall;
-
-    $w->signal_connect(size_allocate => sub {
-	my ($wi, $he) = @{$_[1]}[2,3];
-	my ($X, $Y, $Wi, $He) = @{$my_gtk::force_center || $o->{force_center}};
-        $w->set_uposition(max(0, $X + ($Wi - $wi) / 2), max(0, $Y + ($He - $he) / 2));
-
-	if (!$::isStandalone && !$::live && !$::g_auto_install && !$::noShadow) {
-	    my $sqw = $my_gtk::shape_width; #square width
-	    my $wia = int(($wi+7)/8);
-	    my $s = "\xFF" x ($wia*$he);
-	    my $wib = $wia*8;
-	    my $dif = $wib-$wi;
-	    foreach my $y (0..$sqw-1) { vec($s, $wib-1-$dif-$_+$wib*$y, 1) = 0x0 foreach (0..$sqw-1) }
-	    foreach my $y (0..$sqw-1) { vec($s, (($he-1)*$wib)-$wib*$y+$_, 1) = 0x0 foreach (0..$sqw-1) }
-	    $w->realize;
-	    my $b = Gtk::Gdk::Bitmap->create_from_data($w->window, $s, $wib, $he);
-	    $w->window->shape_combine_mask($b, 0, 0);
-	}
-    }) if ($my_gtk::force_center || $o->{force_center}) && !($my_gtk::force_position || $o->{force_position}) ;
-
-    $o->{window} = $f;
-    $o->{rwindow} = $w;
-    $table and $table->draw(undef);
-}
-
-my ($next_child, $left, $right, $up, $down);
-{
-    my $next_child = sub {
-	my ($c, $dir) = @_;
-
-	my @childs = $c->parent->children;
-   
-	my $i; for ($i = 0; $i < @childs; $i++) {
-	    last if $childs[$i] == $c || $childs[$i]->subtree == $c;
-	}
-	$i += $dir;
-	0 <= $i && $i < @childs ? $childs[$i] : undef;
-    };
-    $left = sub { &$next_child($_[0]->parent, 0); };
-    $right = sub {
-	my ($c) = @_;
-	if ($c->subtree) {
-	    $c->expand;
-	    ($c->subtree->children)[0];
-	} else {
-	    $c;
-	}
-    };
-    $down = sub {
-	my ($c) = @_;
-	return &$right($c) if ref $c eq "Gtk::TreeItem" && $c->subtree && $c->expanded;
-
-	if (my $n = &$next_child($c, 1)) {
-	    $n;
-	} else {
-	    return if ref $c->parent ne 'Gtk::Tree';	
-	    &$down($c->parent);
-	}
-    };
-    $up = sub {
-	my ($c) = @_;
-	if (my $n = &$next_child($c, -1)) {
-	    $n = ($n->subtree->children)[-1] while ref $n eq "Gtk::TreeItem" && $n->subtree && $n->expanded;
-	    $n;
-	} else {
-	    return if ref $c->parent ne 'Gtk::Tree';	
-	    &$left($c);
-	}
-    };
-}
-
-sub create_treeitem($) {
-    my ($name) = @_;
-    
-    my $w = new Gtk::TreeItem($name);
-    $w->signal_connect(key_press_event => sub {
-        my (undef, $e) = @_;
-        local $_ = chr ($e->{keyval});
-
-	if ($e->{keyval} > 0x100) {
-	    my $n;
-	    $n = &$left($w)  if /[Q´\x96]/;
-	    $n = &$right($w) if /[S¶\x98]/;
-	    $n = &$up($w)    if /[R¸\x97]/;
-	    $n = &$down($w)  if /[T²\x99]/;
-	    if ($n) {
-		$n->focus('up');
-		$w->signal_emit_stop("key_press_event"); 
-	    }
-	    $w->expand if /[+«]/;
-	    $w->collapse if /[-\xad]/;
-	    do { 
-		$w->expanded ? $w->collapse : $w->expand; 
-		$w->signal_emit_stop("key_press_event"); 
-	    } if /[\r\x8d]/;
-	}
-        1;
-    });
-    $w;
-}
-
-
-
-#-###############################################################################
-#- ask_XXX
-
-#- just give a title and some args, and it will return the value given by the user
-#-###############################################################################
-
-sub ask_warn       { my $w = my_gtk->new(shift @_); $w->_ask_warn(@_); main($w); }
-sub ask_yesorno    { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Yes"), _("No")); main($w); }
-sub ask_okcancel   { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Is this correct?"), _("Ok"), _("Cancel")); main($w); }
-sub ask_from_entry { my $w = my_gtk->new(shift @_); $w->_ask_from_entry(@_); main($w); }
-
-sub _ask_from_entry($$@) {
-    my ($o, @msgs) = @_;
-    my $entry = new Gtk::Entry;
-    my $f = sub { $o->{retval} = $entry->get_text; Gtk->main_quit };
-    $o->{ok_clicked} = $f;
-    $o->{cancel_clicked} = sub { undef $o->{retval}; Gtk->main_quit };
-
-    gtkadd($o->{window},
-	  gtkpack($o->create_box_with_title(@msgs),
-		 gtksignal_connect($entry, 'activate' => $f),
-		 ($o->{hide_buttons} ? () : create_okcancel($o))),
-	  );
-    $entry->grab_focus;
-}
-
-sub _ask_warn($@) {
-    my ($o, @msgs) = @_;
-    gtkadd($o->{window},
-	  gtkpack($o->create_box_with_title(@msgs),
-		 gtksignal_connect(my $w = new Gtk::Button(_("Ok")), "clicked" => sub { Gtk->main_quit }),
-		 ),
-	  );
-    $w->grab_focus;
-}
-
-sub _ask_okcancel($@) {
-    my ($o, @msgs) = @_;
-    my ($ok, $cancel) = splice @msgs, -2;
-
-    gtkadd($o->{window},
-	   gtkpack(create_box_with_title($o, @msgs),
-		   create_okcancel($o, $ok, $cancel),
-		 )
-	 );
-    $o->{ok}->grab_focus;
-}
-
-
-sub _ask_file {
-    my ($o, $title, $path) = @_;
-    my $f = $o->{rwindow} = new Gtk::FileSelection $title;
-    $f->set_filename($path);
-    $f->ok_button->signal_connect(clicked => sub { $o->{retval} = $f->get_filename ; Gtk->main_quit });
-    $f->cancel_button->signal_connect(clicked => sub { Gtk->main_quit });
-    $f->hide_fileop_buttons;
-}
-
-sub ask_browse_tree_info {
-    my ($common) = @_;
-
-    my $w = my_gtk->new($common->{title});
-    my $tree = Gtk::CTree->new(3, 0);
-    $tree->set_selection_mode('browse');
-    $tree->set_column_auto_resize($_, 1) foreach 1..2;
-    $tree->set_column_width(0, 200);
-
-    gtkadd($w->{window}, 
-	   gtkpack_(new Gtk::VBox(0,5),
-		    0, $common->{message},
-		    1, gtkpack(new Gtk::HBox(0,0),
-			       createScrolledWindow($tree),
-			       gtkadd(gtkset_usize(new Gtk::Frame(_("Info")), $::windowwidth - 490, 0),
-				      createScrolledWindow(my $info = new Gtk::Text),
-				     )),
-		    0, my $l = new Gtk::HBox(0,15),
-		    0, gtkpack(new Gtk::HBox(0,10),
-			       my $go = gtksignal_connect(new Gtk::Button($common->{ok}), "clicked" => sub { $w->{retval} = 1; Gtk->main_quit }),
-			       $common->{cancel} ? (gtksignal_connect(new Gtk::Button($common->{cancel}), "clicked" => sub { $w->{retval} = 0; Gtk->main_quit })) : (),
-			      )
-    ));
-    gtkpack__($l, my $toolbar = new Gtk::Toolbar('horizontal', 'icons'));
-
-    if ($common->{auto_deps}) {
-	gtkpack__($l, gtksignal_connect(gtkset_active(new Gtk::CheckButton($common->{auto_deps}), $common->{state}{auto_deps}),
-					clicked => sub { invbool \$common->{state}{auto_deps} }));
-    }
-    $l->pack_end(my $status = new Gtk::Label, 0, 1, 20);
-
-    $w->{window}->set_usize(map { $_ - 2 * $my_gtk::border - 4 } $::windowwidth, $::windowheight);
-    $go->grab_focus;
-    $w->{rwindow}->show_all;
-
-    my @toolbar = (ftout  =>  [ _("Expand Tree") , sub { $tree->expand_recursive(undef) } ],
-		   ftin   =>  [ _("Collapse Tree") , sub { $tree->collapse_recursive(undef) } ],
-		   reload =>  [ _("Toggle between flat and group sorted"), sub { invbool(\$common->{state}{flat}); $common->{rebuild_tree}->() } ]);
-    foreach my $ic (@{$common->{icons} || []}) {
-	push @toolbar, ( $ic->{icon} => [ $ic->{help}, sub {
-					     if ($ic->{code}) {
-						 my $w = $ic->{wait_message} && $common->{wait_message}->('', $ic->{wait_message});
-						 $ic->{code}();
-						 $common->{rebuild_tree}->();
-					     }
-					 } ]);
-    }
-    my %toolbar = @toolbar;
-    $toolbar->set_button_relief("none");
-    foreach (grep_index { $::i % 2 == 0 } @toolbar) {
-	gtksignal_connect($toolbar->append_item(undef, $toolbar{$_}[0], undef, gtkpng("$ENV{SHARE_PATH}/$_.png")),
-			  clicked => $toolbar{$_}[1]);
-    }
-    $toolbar->set_style("icons");
-
-    my $widgets = { w => $w, tree => $tree, info => $info, status => $status};
-    ask_browse_tree_info_given_widgets($common, $widgets);
-}
-
-sub ask_browse_tree_info_given_widgets {
-    my ($common, $w) = @_;
-    my ($curr, $parent, $prev_label, $idle);
-    my (%wtree, %ptree, %pix);
-    my $update_size = sub {
-	my $new_label = $common->{get_status}();
-	$prev_label ne $new_label and $w->{status}->set($prev_label = $new_label);
-    };
-    
-    my $set_node_state_flat = sub {
-	my ($node, $state) = @_;
-	unless ($pix{$state}) {
-	    foreach ("$ENV{SHARE_PATH}/$state.png", "$ENV{SHARE_PATH}/rpm-$state.png") {
-		if (-e $_) {
-		    $pix{$state} = [ gtkcreate_png($_) ];
-		    last;
-		}
-	    }
-	    $pix{$state} or die "unable to find a pixmap for state $state";
-	}
-	$w->{tree}->node_set_pixmap($node, 1, $pix{$state}[0], $pix{$state}[1]);
-    };
-    my $set_node_state_tree; $set_node_state_tree = sub {
-	my ($node, $state) = @_;
-	unless ($pix{$state}) {
-	    foreach ("$ENV{SHARE_PATH}/$state.png", "$ENV{SHARE_PATH}/rpm-$state.png") {
-		if (-e $_) {
-		    $pix{$state} = [ gtkcreate_png($_) ];
-		    last;
-		}
-	    }
-	    $pix{$state} or die "unable to find a pixmap for state $state";
-	}
-	if ($node->{state} ne $state) {
-	    if ($node->row->is_leaf) {
-		my $parent = $node->row->parent;
-		my $stats = $parent->{state_stats} ||= {}; --$stats->{$node->{state}}; ++$stats->{$state};
-		my @list = grep { $stats->{$_} > 0 } keys %$stats;
-		my $new_state = @list == 1 ? $list[0] : 'semiselected';
-		$parent->{state} ne $new_state and $set_node_state_tree->($parent, $new_state);
-	    }
-	    $w->{tree}->node_set_pixmap($node, 1, $pix{$state}[0], $pix{$state}[1]);
-	    $node->{state} = $state; #- hack to to get this features efficiently.
-	}
-    };
-    my $set_node_state = $common->{state}{flat} ? $set_node_state_flat : $set_node_state_tree;
-
-    my $set_leaf_state = sub {
-	my ($leaf, $state) = @_;
-	$set_node_state->($_, $state) foreach @{$ptree{$leaf}};
-    };
-    my $add_parent; $add_parent = sub {
-	my ($root, $state) = @_;
-	$root or return undef;
-	if (my $w = $wtree{$root}) { return $w }
-	my $s; foreach (split '\|', $root) {
-	    my $s2 = $s ? "$s|$_" : $_;
-	    $wtree{$s2} ||= do {
-		my $n = $w->{tree}->insert_node($s ? $add_parent->($s, $state) : undef, undef, [$_, '', ''], 5, (undef) x 4, 0, 0);
-		$n;
-	    };
-	    $s = $s2;
-	}
-	$set_node_state->($wtree{$s}, $state); #- use this state by default as tree is building.
-	$wtree{$s};
-    };
-    my $add_node = sub {
-	my ($leaf, $root) = @_;
-	my $state = $common->{node_state}($leaf) or return;
-	my $node = $w->{tree}->insert_node($add_parent->($root, $state), undef, [$leaf, '', ''], 5, (undef) x 4, 1, 0);
-	$set_node_state->($node, $state);
-	push @{$ptree{$leaf}}, $node;
-    };
-    $common->{rebuild_tree} = sub {
-	foreach (values %ptree) {
-	    delete $_->{state} foreach @$_;
-	}
-	foreach (values %wtree) {
-	    delete $_->{state};
-	    delete $_->{state_stats};
-	}
-	%ptree = %wtree = ();
-
-	$w->{tree}->freeze;
-	while (1) { $w->{tree}->remove_node($w->{tree}->node_nth(0) || last) }
-
-	$set_node_state = $common->{state}{flat} ? $set_node_state_flat : $set_node_state_tree;
-	$common->{build_tree}($add_node, $common->{state}{flat}, $common->{tree_mode});
-
-	$w->{tree}->thaw;
-	&$update_size;
-    };
-    $common->{rebuild_tree}->();
-    
-    my $display_info = sub { gtktext_insert($w->{info}, $common->{get_info}($curr)); 0 };
-    my $children = sub { map { ($w->{tree}->node_get_pixtext($_, 0))[0] } gtkctree_children($_[0]) };
-    my $toggle = sub {
-	if (ref $curr && ! $_[0]) {
-	    $w->{tree}->toggle_expansion($curr);
-	} else {
-	    if (ref $curr) {
-		my @l = $common->{grep_allowed_to_toggle}($children->($curr)) or return;
-		my @unsel = $common->{grep_unselected}(@l);
-		my @p = @unsel ?
-		  @unsel : # not all is selected, select all
-		    @l;
-		$common->{toggle_nodes}($set_leaf_state, @p);
-		&$update_size;
-		$parent = $curr;
-	    } else {
-		$common->{check_interactive_to_toggle}($curr) and $common->{toggle_nodes}($set_leaf_state, $curr);
-		&$update_size;
-	    }
-	}
-    };
-
-    $w->{tree}->signal_connect(key_press_event => sub {
-        my ($w, $e) = @_;
-	my $c = chr($e->{keyval} & 0xff);
-	$toggle->(0) if $e->{keyval} >= 0x100 ? $c eq "\r" || $c eq "\x8d" : $c eq ' ';
-	1;
-    });
-    $w->{tree}->signal_connect(tree_select_row => sub {
-	Gtk->timeout_remove($idle) if $idle;
-
-	if ($_[1]->row->is_leaf) {
-	    ($curr) = $w->{tree}->node_get_pixtext($_[1], 0);
-	    $parent = $_[1]->row->parent;
-	    $idle = Gtk->timeout_add(100, $display_info);
-	} else {
-	    $curr = $_[1];
-	}
-	$toggle->(1) if $_[2] == 1;
-    });
-    &$update_size;
-    my $b = before_leaving { #- ensure cleaning here.
-	foreach (values %ptree) {
-	    delete $_->{state} foreach @$_;
-	}
-	foreach (values %wtree) {
-	    delete $_->{state};
-	    delete $_->{state_stats};
-	}
-    };
-    $w->{w}->main;
-}
-
-1;
-
-#-###############################################################################
-#- rubbish
-#-###############################################################################
-
-#-sub label_align($$) {
-#-    my $w = shift;
-#-    local $_ = shift;
-#-    $w->set_alignment(!/W/i, !/N/i);
-#-    $w
-#-}
-
diff --git a/perl-install/network.pm b/perl-install/network.pm
deleted file mode 100644
index 9979e439e..000000000
--- a/perl-install/network.pm
+++ /dev/null
@@ -1,5 +0,0 @@
-package network; # $Id$
-
-use network::network;
-
-1;
diff --git a/perl-install/network/adsl.pm b/perl-install/network/adsl.pm
deleted file mode 100644
index d8d2a4758..000000000
--- a/perl-install/network/adsl.pm
+++ /dev/null
@@ -1,172 +0,0 @@
-package network::adsl;
-
-use common;
-use run_program;
-use network::tools;
-use network::ethernet;
-use modules;
-
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(adsl_ask_info adsl_detect adsl_conf adsl_conf_backend);
-
-sub configure {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkADSL');
-  conf_adsl_step1:
-    my $type = $in->ask_from_list_(_("Connect to the Internet"),
-				   _("The most common way to connect with adsl is pppoe.
-Some connections use pptp, a few ones use dhcp.
-If you don't know, choose 'use pppoe'"), [__("use pppoe"), __("use pptp"), __("use dhcp"), __("Alcatel speedtouch usb")]) or return;
-    $type =~ s/use //;
-    if ($type eq 'pppoe') {
-	$in->do_pkgs->install("rp-$type");
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-	#-network::configureNetwork($prefix, $netc, $in, $intf, $first_time);
-#  	if ($::isStandalone and $netc->{NET_DEVICE}) {
-#  	    $in->ask_yesorno(_("Network interface"),
-#  			     _("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1)
-#  	      and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}");
-#  	}
-    }
-    if ($type eq 'dhcp') {
-	$in->do_pkgs->install(qw(dhcpcd));
-	go_ethernet($netc, $intf, 'dhcp', '', '', $first_time) or goto conf_adsl_step1;
-    }
-    if ($type eq 'pptp') {
-	$in->do_pkgs->install(qw(pptp-adsl));
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-    }
-    if ($type =~ /speedtouch/) {
-	$type = 'speedtouch';
-	$in->do_pkgs->install(qw(speedtouch));
-	$netcnx->{type} = "adsl_$type";
-	$netcnx->{"adsl_$type"} = {};
-	$netcnx->{"adsl_$type"}{vpivci} = '';
-	adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
-    }
-    $type =~ /speedtouch/ or $netconnect::need_restart_network = 1;
-    1;
-}
-
-sub adsl_ask_info {
-    my ($adsl, $netc, $intf) = @_;
-    add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
-    add2hash($adsl, { login => '', passwd => '', passwd2 => '' });
-    ask_info2($adsl, $netc);
-}
-
-#- adsl_detect : detect adsl modem on a given interface
-#- input :
-#-  $interface : interface where the modem is supposed to be connected : should be "ethx"
-#- output:
-#-  true/false : success|failed
-sub adsl_detect {
-    return 0;
-    my ($interface) = @_;
-    run_program::rooted($prefix, "ifconfig $interface 10.0.0.10 netmask 255.255.255.0");
-    my $ret=run_program::rooted($prefix, "/bin/ping -c 1 10.0.0.138  2> /dev/null");
-    run_program::rooted($prefix, "ifconfig $interface 0.0.0.0 netmask 255.255.255.0");
-    run_program::rooted($prefix, "/etc/init.d/network restart");
-    $ret;
-}
-
-sub adsl_conf {
-    my ($adsl, $netc, $intf, $adsl_type) = @_;
-
-  adsl_conf_step_1:
-    adsl_ask_info ($adsl, $netc, $intf) or return;
-  adsl_conf_step_2:
-    $adsl_type eq 'speedtouch' or conf_network_card($netc, $intf, 'static' , '10.0.0.10' ) or goto adsl_conf_step_1;
-    adsl_conf_backend($adsl, $netc, $adsl_type);
-    1;
-}
-
-sub adsl_conf_backend {
-    my ($adsl, $netc, $adsl_type, $netcnx) = @_;
-    defined $netcnx and $netc->{adsltype} = $netcnx->{type};
-    $netc->{adsltype} ||= "adsl_$adsl_type";
-    mkdir_p("$prefix/etc/ppp");
-    output("$prefix/etc/ppp/options",
-'lock
-noipdefault
-persist
-noauth
-usepeerdns
-defaultroute
-') if $adsl_type =~ /pptp|pppoe|speedtouch/;
-
-    write_secret_backend($adsl->{login}, $adsl->{passwd});
-
-    if ($adsl_type eq 'pppoe') {
-	substInFile {
-	    s/ETH=.*\n/ETH=$netc->{NET_DEVICE}\n/;
-	    s/USER=.*\n/USER=$adsl->{login}\n/;
-	} "$prefix/etc/ppp/pppoe.conf";
-    }
-
-    if ($adsl_type eq 'speedtouch') {
-	$netc->{vpivci} =~ /(\d+)_(\d+)/;
-	output("$prefix/etc/ppp/peers/adsl", 
-qq{noauth
-noipdefault
-pty "/usr/bin/pppoa3 -vpi $1 -vci $2"
-sync
-kdebug 1
-noaccomp
-nopcomp
-noccp
-novj
-holdoff 4
-maxfail 25
-persist
-usepeerdns
-defaultroute
-user "$adsl->{login}"
-});
-	modules::add_alias($_->[0], $_->[1]) foreach (['char-major-108', 'ppp_generic'],
-						      ['tty-ldisc-3', 'ppp_async'],
-						      ['tty-ldisc-13', 'n_hdlc'],
-						      ['tty-ldisc-14', 'ppp_synctty'],
-						      ['ppp-compress-21', 'bsd_comp'],
-						      ['ppp-compress-24', 'ppp_deflate'],
-						      ['ppp-compress-26', 'ppp_deflate']);
-	$::isStandalone and modules::write_conf($prefix);
-	$in->do_pkgs->install('speedtouch_mgmt');
-	-e "$prefix/usr/share/speedtouch/mgmt.o" or $in->ask_warn('', _('You need the alcatel microcode.
-Download it at
-http://www.alcatel.com/consumer/dsl/dvrreg_lx.htm
-and copy the mgmt.o in /usr/share/speedtouch'));
-    }
-
-    if ($adsl_type eq 'pptp') {
-	write_cnx_script($netc, "adsl",
-"/sbin/route del default
-/usr/bin/pptp 10.0.0.138 name $adsl->{login}
-",
-'/usr/bin/killall pptp pppd
-', $netc->{adsltype}) } elsif ($adsl_type eq 'pppoe') {
-    write_cnx_script($netc, "adsl",
-"/sbin/route del default
-LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C /usr/sbin/adsl-start $netc->{NET_DEVICE} $adsl->{login}
-",
-'/usr/sbin/adsl-stop
-/usr/bin/killall pppoe pppd
-', $netc->{adsltype}) } elsif ($adsl_type eq 'speedtouch') {
-    write_cnx_script($netc, 'adsl',
-'/sbin/route del default
-/usr/share/speedtouch/speedtouch.sh start
-',
-'/usr/share/speedtouch/speedtouch.sh stop
-', $netc->{adsltype}) }
-
-    $netc->{NET_INTERFACE}='ppp0';
-}
-
-1;
diff --git a/perl-install/network/ethernet.pm b/perl-install/network/ethernet.pm
deleted file mode 100644
index e25cb7e68..000000000
--- a/perl-install/network/ethernet.pm
+++ /dev/null
@@ -1,216 +0,0 @@
-package network::ethernet;
-
-use network::network;
-use modules;
-use any;
-use detect_devices;
-use common;
-use run_program;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(configureNetwork conf_network_card conf_network_card_backend go_ethernet);
-
-sub configure_cable {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkCable');
-    $netcnx->{type}='cable';
-    #  		     $netcnx->{cable}={};
-    #  		     $in->ask_from_entries_ref(_("Cable connection"),
-    #  _("Please enter your host name if you know it.
-    #  Some DHCP servers require the hostname to work.
-    #  Your host name should be a fully-qualified host name,
-    #  such as ``mybox.mylab.myco.com''."),
-    #  					       [_("Host name:")], [ \$netcnx->{cable}{hostname} ]);
-    if ($::expert) {
-	my @m=(
-	       { description => "dhcpcd",
-		 c => 1},
-	       { description => "dhcpxd",
-		 c => 3},
-	       { description => "dhcp-client",
-		 c => 4},
-	      );
-	if (my $f = $in->ask_from_listf(_("Connect to the Internet"),
-					_("Which dhcp client do you want to use?
-Default is dhcpcd"),
-					sub { $_[0]{description} },
-					\@m )) {
-	    $f->{c}==1 and $netcnx->{dhcp_client}="dhcpcd" and $in->do_pkgs->install(qw(dhcpcd));
-	    $f->{c}==3 and $netcnx->{dhcp_client}="dhcpxd" and $in->do_pkgs->install(qw(dhcpxd));
-	    $f->{c}==4 and $netcnx->{dhcp_client}="dhcp-client" and $in->do_pkgs->install(qw(dhcp-client));
-	}
-    } else {
-	$in->do_pkgs->install(qw(dhcpcd));
-    }
-    go_ethernet($netc, $intf, 'dhcp', '', '', $first_time);
-    write_cnx_script($netc, "cable",
-qq(
-/sbin/ifup $netc->{NET_DEVICE}
-),
-qq(
-/sbin/ifdown $netc->{NET_DEVICE}
-), $netcnx->{type});
-    1;
-}
-
-sub configure_lan {
-    my ($netcnx, $netc, $intf, $first_time) = @_;
-    $::isInstall and $in->set_help('configureNetworkIP');
-    configureNetwork($netc, $intf, $first_time) or return;
-    configureNetwork2($in, $prefix, $netc, $intf);
-    $netc->{NETWORKING} = "yes";
-    if ($netc->{GATEWAY} || grep { $_->{BOOTPROTO} eq 'dhcp' } values %$intf) {
-	$netcnx->{type}='lan';
-	$netcnx->{NET_DEVICE} = $netc->{NET_DEVICE} = '';
-	$netcnx->{NET_INTERFACE} = 'lan'; #$netc->{NET_INTERFACE};
-        write_cnx_script($netc, "local network",
-qq(
-/etc/rc.d/init.d/network restart
-),
-qq(
-/etc/rc.d/init.d/network stop
-/sbin/ifup lo
-), $netcnx->{type});
-    }
-    $::isStandalone and modules::write_conf($prefix);
-    1;
-}
-
-sub conf_network_card {
-    my ($netc, $intf, $type, $ipadr, $netadr) = @_;
-    #-type =static or dhcp
-    any::load_category($in, 'network/main|usb', !$::expert, 1);
-    my @all_cards=conf_network_card_backend($netc, $intf, $type, undef, $ipadr, $netadr);
-    my $interface;
-    @all_cards == () and $in->ask_warn('', _("No ethernet network adapter has been detected on your system.
-I cannot set up this connection type.")) and return;
-    @all_cards == 1 and $interface = $all_cards[0]->[0] and goto l1;
-    again :
-	$interface = $in->ask_from_list(_("Choose the network interface"),
-					_("Please choose which network adapter you want to use to connect to Internet"),
-					[ map { $_->[0] . ($_->[1] ? " ( using module $_->[1] )" : "") } @all_cards ]
-				       ) or return;
-    defined $interface or goto again;
-  l1:
-    $::isStandalone and modules::write_conf($prefix);
-
-    my $device=conf_network_card_backend($netc, $intf, $type, $interface, $ipadr, $netadr, $interface);
-#      if ( $::isStandalone and !($type eq "dhcp")) {
-#  	$in->ask_yesorno(_("Network interface"),
-#  			  _("I'm about to restart the network device:\n") . $device . _("\nDo you agree?"), 1) and configureNetwork2($in, $prefix, $netc, $intf) and system("$prefix/sbin/ifdown $device;$prefix/sbin/ifup $device");
-#      }
-    1;
-}
-
-#- conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling load_category($in, 'network/main|usb', !$::expert, 1) or load_category_backend before calling this function. Basically, you call this function in 2 times.
-#- input
-#-  $prefix
-#-  $netc
-#-  $intf
-#-  $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
-#-  $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
-#-  $ipadr : facultative, ip address of the interface : string
-#-  $netadr : facultative, netaddress of the interface : string
-#- when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-#- $intf output: $device is the result of
-#-  $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
-#-  $intf->{$device}->{BOOTPROTO} : $type
-#-  $intf->{$device}->{NETMASK} : '255.255.255.0'
-#-  $intf->{$device}->{NETWORK} : $netadr
-#-  $intf->{$device}->{ONBOOT} : "yes"
-#- $netc output:
-#-  $netc->{nb_cards} : nb of ethernet cards
-#-  $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-#- output:
-#-  $all_cards : a list of a list ( [eth1, module1], ... , [ethn, modulen]). Pass the ethx as $interface in further call.
-#-  $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-sub conf_network_card_backend {
-    my ($netc, $intf, $type, $interface, $ipadr, $netadr) = @_;
-    #-type =static or dhcp
-    if (!$interface) {
-	my @all_cards = detect_devices::getNet();
-	$netc->{nb_cards} = @all_cards;
-
-	my @devs = detect_devices::pcmcia_probe();
-	modules::mergein_conf("$prefix/etc/modules.conf");
-	my $saved_driver;
-	return map {
-	    my $interface = $_;
-	    my $a = modules::get_alias($interface);
-	    my $b;
-	    foreach (@devs) {
-		$_->{device} eq $interface and $b = $_->{driver};
-	    }
-	    $a ||= $b;
-	    if ($a) { $saved_driver = $a }
-	    [$interface, $saved_driver];
-	} @all_cards;
-    }
-    my ($device) = $interface =~ /(eth[0-9]+)/ or die("the interface is not an ethx");
-    $netc->{NET_DEVICE} = $device; #- one consider that there is only ONE Internet connection device..
-
-    @{$intf->{$device}}{qw(DEVICE BOOTPROTO   NETMASK     NETWORK ONBOOT)} = 
-                         ($device, $type, '255.255.255.0', $netadr, 'yes');
-
-    $intf->{$device}->{IPADDR} = $ipadr if $ipadr;
-    $device;
-}
-
-sub go_ethernet {
-    my ($netc, $intf, $type, $ipadr, $netadr, $first_time) = @_;
-    conf_network_card($netc, $intf, $type, $ipadr, $netadr) or return;
-    $netc->{NET_INTERFACE}=$netc->{NET_DEVICE};
-    configureNetwork($netc, $intf, $first_time) or return;
-#      if ( $::isStandalone and $netc->{NET_DEVICE}) {
-#  	$in->ask_yesorno(_("Network interface"),
-#  			 _("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1) and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}");
-#      }
-    1;
-}
-
-sub configureNetwork {
-    my ($netc, $intf, $first_time) = @_;
-    local $_;
-    any::load_category($in, 'network/main|usb', !$::expert, 1);
-    my @l = detect_devices::getNet() or die _("no network card found");
-    my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-
-  configureNetwork_step_1:
-    my $n_card=0;
-    $netc ||= {};
-    my $last; foreach (@l) {
-	my $intf2 = findIntf($intf ||= {}, $_);
-	add2hash($intf2, $last);
-	add2hash($intf2, { NETMASK => '255.255.255.0' });
-	configureNetworkIntf($netc, $in, $intf2, $netc->{NET_DEVICE}, 0, $all_cards[$n_card]->[1]) or return;
-
-	$last = $intf2;
-	$n_card++;
-    }
-    #-	  {
-    #-	      my $wait = $o->wait_message(_("Hostname"), _("Determining host name and domain..."));
-    #-	      network::guessHostname($o->{prefix}, $o->{netc}, $o->{intf});
-    #-	  }
-    $last or return;
-    if ($last->{BOOTPROTO} =~ /^(dhcp|bootp)$/) {
-	$netc->{minus_one} = 1;
-	my $dhcp_hostname = $netc->{HOSTNAME};
-	$::isInstall and $in->set_help('configureNetworkHostDHCP');
-	$in->ask_from(_("Configuring network"),
-_("Please enter your host name if you know it.
-Some DHCP servers require the hostname to work.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''."),
-		      [ { label => _("Host name"), val => \$netc->{HOSTNAME} }]) or goto configureNetwork_step_1;
-	$netc->{HOSTNAME} ne $dhcp_hostname and $netc->{DHCP_HOSTNAME} = $netc->{HOSTNAME};
-    } else {
-	configureNetworkNet($in, $netc, $last ||= {}, @l) or goto configureNetwork_step_1;
-    }
-    miscellaneousNetwork($in);
-    1;
-}
-
-1;
diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm
deleted file mode 100644
index 4b081274e..000000000
--- a/perl-install/network/isdn.pm
+++ /dev/null
@@ -1,276 +0,0 @@
-package network::isdn;
-
-use network::isdn_consts;
-use common;
-use any;
-use modules;
-use run_program;
-use log;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-use MDK::Common::File;
-@ISA = qw(Exporter);
-@EXPORT = qw(isdn_write_config isdn_write_config_backend get_info_providers_backend isdn_ask_info isdn_ask_protocol isdn_ask isdn_detect isdn_detect_backend isdn_get_list isdn_get_info);
-
-sub configure {
-    my ($netcnx, $netc) = @_;
-  isdn_step_1:
-    defined $netc->{autodetect}{isdn}{id} and goto intern_pci;
-    $::isInstall and $in->set_help('configureNetworkISDN');
-    my $e = $in->ask_from_list_(_("Network Configuration Wizard"),
-				_("What kind is your ISDN connection?"), [ __("Internal ISDN card"), __("External ISDN modem")]
-			       ) or return;
-    if ($e =~ /card/) {
-      intern_pci:
-	$netc->{isdntype}='isdn_internal';
-	$netcnx->{isdn_internal}={};
-	$netcnx->{isdn_internal}{$_} = $netc->{autodetect}{isdn}{$_} foreach ('description', 'vendor', 'id', 'driver', 'card_type', 'type');
-	isdn_detect($netcnx->{isdn_internal}, $netc) or return;
-    } else {
-	$netc->{isdntype}='isdn_external';
-	$netcnx->{isdn_external}={};
-	$netcnx->{isdn_external}{device}=$netc->{autodetect}{modem};
-	$netcnx->{isdn_external}{special_command}='AT&F&O2B40';
-	require network::modem;
-	network::modem::pppConfig($netcnx->{isdn_external}, $mouse, $netc) or goto isdn_step_1;
-    }
-    1;
-}
-
-sub isdn_write_config {
-    my ($isdn, $netc) = @_;
-  isdn_write_config_step_1:
-    my $e = $in->ask_from_list_(_("Network Configuration Wizard"),
-				    _("Which ISDN configuration do you prefer?
-
-* The Old configuration uses isdn4net. It contains powerfull
-  tools, but is tricky to configure, and not standard.
-
-* The New configuration is easier to understand, more
-  standard, but with less tools.
-
-We recommand the light configuration.
-"), [ __("New configuration (isdn-light)"), __("Old configuration (isdn4net)")]
-			       ) or return;
-    my ($rmpackage, $instpackage) = $e =~ /light/ ? ('isdn4net', 'isdn-light') : ('isdn-light', 'isdn4net');
-    if (!$::isStandalone) {
-	require pkgs;
-	my $p = pkgs::packageByName($in->{packages}, $rmpackage);
-	$p && pkgs::packageFlagSelected($p) and pkgs::unselectPackage($in->{packages}, $p);
-    }
-    run_program::rooted($prefix, "rpm", "-e", "$rmpackage");
-    $in->do_pkgs->install($instpackage, if_($isdn->{speed} =~ /128/, 'ibod'), 'isdn4k-utils');
-    my $light = $e =~ /light/ ? 1 : 0;
-    isdn_write_config_backend($isdn, $light, $netc);
-    1;
-}
-
-sub isdn_write_config_backend {
-    my ($isdn, $light, $netc, $netcnx) = @_;
-    defined $netcnx and $netc->{isdntype} = $netcnx->{type};
-    if ($light) {
-	modules::mergein_conf("$prefix/etc/modules.conf");
-	if ($isdn->{id}) {
-	    isdn_detect_backend($isdn);
-	} else {
-	    my $a="";
-	    defined $isdn->{$_} and $a .= "$_=" . $isdn->{$_} . " " foreach qw(type protocol mem io io0 io1 irq);
-	    $isdn->{driver} eq "hisax" and $a.="id=HiSax";
-	    modules::set_options($isdn->{driver}, $a);
-	}
-	modules::add_alias("ippp0", $isdn->{driver});
-	$::isStandalone and modules::write_conf($prefix);
-	foreach my $f ('ioptions1B', 'ioptions2B') {
-	    substInFile { s/^name .*\n//; $_ .= "name $isdn->{login}\n" if eof  } "$prefix/etc/ppp/$f";
-	    chmod 0600, $f;
-	}
-	foreach my $f ('isdn1B.conf', 'isdn2B.conf') {
-	    my $a=1;
-	    substInFile {
-		s/EAZ =.*/EAZ = $isdn->{phone_in}/;
-		s/PHONE_OUT =.*/PHONE_OUT = $isdn->{phone_out}/;
-		if (/NAME = ippp0/ .. /PPPBIND = 0/) {
-		    s/HUPTIMEOUT =.*/HUPTIMEOUT = $isdn->{huptimeout}/;
-		}
-	    } "$prefix/etc/isdn/$f";
-	    chmod 0600, $f;
-	}
-	my $bundle = $isdn->{speed} =~ /64/ ? "1B" : "2B";
-	symlinkf("isdn" . $bundle . ".conf", "$prefix/etc/isdn/isdnctrl.conf");
-	symlinkf("ioptions" . $bundle, "$prefix/etc/ppp/ioptions");
-    } else {
-	my $f = "$prefix/etc/isdn/profile/link/myisp";
-	output ($f,
-	  qq(
-I4L_USERNAME="$isdn->{login}"
-I4L_SYSNAME=""
-I4L_LOCALMSN="$isdn->{phone_in}"
-I4L_REMOTE_OUT="$isdn->{phone_out}"
-I4L_DIALMODE="$isdn->{dialing_mode}"
-) . if_($isdn->{speed} =~ /128/, 'SLAVE="ippp1"
-'));
-	chmod 0600, $f;
-
-	output "$prefix/etc/isdn/profile/card/mycard",
-	  qq(
-I4L_MODULE="$isdn->{driver}"
-I4L_TYPE="$isdn->{type}"
-I4L_IRQ="$isdn->{irq}"
-I4L_MEMBASE="$isdn->{mem}"
-I4L_PORT="$isdn->{io}"
-I4L_IO0="$isdn->{io0}"
-I4L_IO1="$isdn->{io1}"
-I4L_ID="HiSax"
-I4L_FIRMWARE="$isdn->{firmware}"
-);
-
-	output "$prefix/etc/ppp/ioptions",
-	  "lock
-usepeerdns
-defaultroute
-";
-	system "$prefix/etc/rc.d/init.d/isdn4linux restart";
-    }
-
-    substInFile { s/^FIRMWARE.*\n//; $_ .= qq(FIRMWARE="$isdn->{firmware}"\n) if eof  } "$prefix/etc/sysconfig/network-scripts/ifcfg-ippp0";
-
-    write_secret_backend($isdn->{login}, $isdn->{passwd});
-
-    write_cnx_script($netc, "isdn",
-"/sbin/route del default
-/sbin/ifup ippp0
-/sbin/isdnctrl dial ippp0
-" . if_($isdn->{speed} =~ /128/, "service ibod restart
-"),
-"/sbin/isdnctrl hangup ippp0
-/sbin/ifdown ippp0
-"  . if_($isdn->{speed} =~ /128/, "service ibod stop
-"), $netc->{isdntype});
-    1;
-}
-
-sub get_info_providers_backend {
-    my ($isdn, $netc, $name, $file) = @_;
-    $name eq 'Unlisted - edit manually' and return;
-    foreach (catMaybeCompressed($file)) {
-	chop;
-	my ($name_, $phone, $real, $dns1, $dns2) = split '=>';
-	if ($name eq $name_) {
-	    @{$isdn}{qw(user_name phone_out DOMAINNAME2 dnsServer3 dnsServer2)} =
-	               ((split(/\|/, $name_))[2], $phone, $real, $dns1, $dns2);
-	}
-    }
-}
-
-sub isdn_ask_info {
-    my ($isdn, $netc) = @_;
-    my $f = "$ENV{SHARE_PATH}/ldetect-lst/isdn.db";
-    $f = "$prefix$f" if !-e $f;
-    my $str= $in->ask_from_treelist( _("ISDN Configuration"), _("Select your provider.\nIf it isn't listed, choose Unlisted."),
-				     '|', ['Unlisted - edit manually',
-					   read_providers_backend($f)], 'Unlisted - edit manually')
-      or return;
-    get_info_providers_backend($isdn, $netc, $str || 'Unlisted - edit manually', $f);
-    $isdn->{huptimeout} = 180;
-    $isdn->{$_} ||= '' foreach qw(phone_in phone_out dialing_mode login passwd passwd2 idl speed);
-    add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
-    ask_info2($isdn, $netc);
-}
-
-sub isdn_ask_protocol {
-    my @toto=(
-	      { description => $::expert ? _("Europe protocol (EDSS1)") : _("Europe protocol"),
-		protokol => 2},
-	      { description => $::expert ? _("Protocol for the rest of the world\nNo D-Channel (leased lines)") : _("Protocol for the rest of the world"),
-		protokol => 3}
-	     );
-    my $e = $in->ask_from_listf(_("ISDN Configuration"),
-				_("Which protocol do you want to use?"),
-				sub { $_[0]{description} },
-				\@toto ) or return 0;
-    $e->{protokol};
-}
-
-sub isdn_ask {
-    my ($isdn, $netc, $label) = @_;
-  isdn_ask_step_1:
-    my $e = $in->ask_from_list_(_("ISDN Configuration"),
-				$label . "\n" . _("What kind of card do you have?"),
-				[ __("ISA / PCMCIA"), __("PCI"), __("I don't know") ]
-			       ) or return;
-    if ($e =~ /PCI/) {
-	$isdn->{card_type} = 'pci';
-    } else {
-	$in->ask_from_list_(_("ISDN Configuration"),
-			    _("
-If you have an ISA card, the values on the next screen should be right.\n
-If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.
-"),
-			    [ __("Continue"), __("Abort") ]) eq 'Continue' or goto isdn_ask_step_1;
-	$isdn->{card_type} = 'isa';
-    }
-
-  isdn_ask_step_2:
-    $e = $in->ask_from_listf(_("ISDN Configuration"),
-			     _("Which is your ISDN card?"),
-			     sub { $_[0]{description} },
-			     [ grep {$_->{card} eq $isdn->{card_type}; } @isdndata ] ) or goto isdn_ask_step_1;
-    $e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(driver type mem io io0 io1 irq firmware);
-
-  isdn_ask_step_3:
-    $isdn->{protocol} = isdn_ask_protocol() or goto isdn_ask_step_2;
-  isdn_ask_step_4:
-    isdn_ask_info($isdn, $netc) or goto isdn_ask_step_3;
-    isdn_write_config($isdn, $netc) or goto isdn_ask_step_4;
-    1;
-}
-
-sub isdn_detect {
-    my ($isdn, $netc) = @_;
-    if ($isdn->{id}) {
-  	log::l("found isdn card : $isdn->{description}; vendor : $isdn->{vendor};id : $isdn->{id}; driver : $isdn->{driver}\n");
-	$isdn->{description} =~ s/\|/ -- /;
-	if ($isdn->{type} eq '') {
-	    isdn_ask($isdn, $netc, _("I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.")) or return;
-	} else {
-	  isdn_detect_step_1:
-	    $isdn->{protocol}=isdn_ask_protocol() or return;
-	  isdn_detect_step_2:
-	    isdn_ask_info($isdn, $netc) or goto isdn_detect_step_1;
-	    isdn_write_config($isdn, $netc) or goto isdn_detect_step_2;
-	}
-    } else {
-	isdn_ask($isdn, $netc, _("No ISDN PCI card found. Please select one on the next screen.")) or return;
-    }
-    $netc->{$_}='ippp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
-    1;
-}
-
-sub isdn_detect_backend {
-    my ($isdn) = @_;
-    if (my ($c) = (modules::probe_category('network/isdn'))) {
-  	$isdn->{$_} = $c->{$_} foreach qw(description vendor id driver options firmware);
-	$isdn->{$_} = sprintf("%0x", $isdn->{$_}) foreach ('vendor', 'id');
-	$isdn->{card_type} = 'pci';
-	($isdn->{type}) = $isdn->{options} =~ /type=(\d+)/;
-#	$c->{options} !~ /id=HiSax/ && $isdn->{driver} eq "hisax" and $c->{options} .= " id=HiSax";
-	if ($c->{options} !~ /protocol=/ && $isdn->{protocol} =~ /\d/) {
-	    modules::set_options($c->{driver}, $c->{options} . " protocol=" . $isdn->{protocol});
-	}
-	$c->{options} =~ /protocol=(\d)/ and $isdn->{protocol} = $1;
-    }
-}
-
-sub isdn_get_list {
-    map { $_->{description} } @isdndata;
-}
-
-sub isdn_get_info {
-    my ($desc) = @_;
-    foreach (@isdndata) {
-	return $_ if ($_->{description} eq $desc);
-    }
-}
-
-1;
diff --git a/perl-install/network/isdn_consts.pm b/perl-install/network/isdn_consts.pm
deleted file mode 100644
index 357da529a..000000000
--- a/perl-install/network/isdn_consts.pm
+++ /dev/null
@@ -1,326 +0,0 @@
-package network::isdn; # $Id$
-
-@isdndata =
-  (
-   {description => "Teles 16.0 (ISA)",               #1 irq, mem, io
-    driver => 'hisax',
-    type => '1',
-    irq => '5',
-    mem => '0xd000',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Teles  8.0 (ISA)", #2 irq, mem
-    driver => 'hisax',
-    type => '2',
-    irq => '9',
-    mem => '0xd800',
-    card => 'isa',
-   },
-   {description => "Teles 16.3 (ISA non PnP)", #3 irq, io
-    driver => 'hisax',
-    type => '3',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Teles 16.3c (ISA PnP)", #14 irq, io
-    driver => 'hisax',
-    type => '14',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Creatix/Teles (ISA PnP)",	#4 irq, io0 (ISAC), io1 (HSCX)
-    driver => 'hisax',
-    type => '4',
-    irq => '5',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "Teles generic (PCI)", #21 no parameter
-    driver => 'hisax',
-    type => '21',
-    card => 'pci',
-   },
-   {description => "Teles 16.3 (PCMCIA)",	#8 irq, io
-    driver => 'hisax',
-    type => '8',
-    irq => '',
-    io => '0x',
-    card => 'isa',
-   },
-   {description => "Teles S0Box", #25 irq, io (of the used lpt port)
-    driver => 'hisax',
-    type => '25',
-    irq => '7',
-    io => '0x378',
-    card => 'isa',
-   },
-   {description => "ELSA PCC/PCF cards (ISA)", #6 io or nothing for autodetect (the io is required only if you have n>1 ELSA card )
-    driver => 'hisax',
-    type => '6',
-    io => "",
-    card => 'isa',
-   },
-   {description => "ELSA Quickstep 1000 (ISA)", #7 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '7',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "ELSA Quickstep 1000 (PCI)", #18 no parameter
-    driver => 'hisax',
-    type => '18',
-    card => 'pci',
-   },
-   {description => "ELSA Quickstep 3000 (PCI)", #18 no parameter
-    driver => 'hisax',
-    type => '18',
-    card => 'pci',
-   },
-   {description => "ELSA generic (PCMCIA)", #10 irq, io  (set with card manager)
-    driver => 'hisax',
-    type => '10',
-    irq => '',
-    io => '0x',
-    card => 'isa',
-   },
-   {description => "ELSA MicroLink (PCMCIA)", #10 irq, io  (set with card manager)
-    driver => 'elsa_cs',
-    card => 'isa',
-   },
-   {description => "ITK ix1-micro Rev.2 (ISA)", #9 irq, io
-    driver => 'hisax',
-    type => '9',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Eicon.Diehl Diva (ISA PnP)", #11 irq, io
-    driver => 'hisax',
-    type => '11',
-    irq => '9',
-    io => '0x180',
-    card => 'isa',
-   },
-   {description => "Eicon.Diehl Diva 20 (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20PRO (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20_U (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "Eicon.Diehl Diva 20PRO_U (PCI)", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   {description => "ASUS COM ISDNLink (ISA)", #12 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '12',
-    irq => '5',
-    io => '0x200',
-    card => 'isa',
-   },
-   {description => "ASUS COM ISDNLink (PCI)",
-    driver => 'hisax',
-    type => '35',
-    card => 'pci',
-   },
-   {description => "DynaLink (PCI)",
-    driver => 'hisax',
-    type => '12',
-    card => 'pci',
-   },
-   {description => "DynaLink IS64PH, ASUSCOM (PCI)", #36
-    driver => 'hisax',
-    type => '36',
-    card => 'pci',
-   },
-   {description => "HFC-2BS0 based cards (ISA)", #13 irq, io
-    driver => 'hisax',
-    type => '13',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "HFC 2BDS0 (PCI)", #35 none
-    driver => 'hisax',
-    type => '35',
-    card => 'pci',
-   },
-   {description => "HFC 2BDS0 S+, SP (PCMCIA)", #37 irq,io (pcmcia must be set with cardmgr)
-    driver => 'hisax',
-    type => '37',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Card (ISA)", #15 irq, io
-    driver => 'hisax',
-    type => '15',
-    irq => '9',
-    io=> '0xd80',
-    card => 'isa',
-   },
-   {description => "Sedlbauer PC/104 (ISA)", #15 irq, io
-    driver => 'hisax',
-    type => '15',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Card (PCI)", #15 no parameter
-    driver => 'hisax',
-    type => '15',
-    card => 'pci',
-   },
-   {description => "Sedlbauer Speed Star (PCMCIA)", #22 irq, io (set with card manager)
-    driver => 'sedlbauer_cs',
-    card => 'isa',
-   },
-   {description => "Sedlbauer Speed Fax+ (ISA Pnp)", #28 irq, io (from isapnp setup)
-    driver => 'hisax',
-    type => '28',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-    firmware => '/usr/lib/isdn/ISAR.BIN',
-   },
-   {description => "Sedlbauer Speed Fax+ (PCI)", #28 no parameter
-    driver => 'hisax',
-    type => '28',
-    card => 'pci',
-    firmware => '/usr/lib/isdn/ISAR.BIN',
-   },
-   {description => "USR Sportster internal (ISA)", #16 irq, io
-    driver => 'hisax',
-    type => '16',
-    irq => '9',
-    io=> '0xd80',
-    card => 'isa',
-   },
-   {description => "MIC card (ISA)",	#17 irq, io
-    driver => 'hisax',
-    type => '17',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   {description => "Compaq ISDN S0 card (ISA)", #19 irq, io0, io1, io (from isapnp setup io=IO2)
-    driver => 'hisax',
-    type => '19',
-    irq => '5',
-    io => '0x0000',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "NETjet card (PCI)", #20 no parameter
-    driver => 'hisax',
-    type => '20',
-    card => 'pci',
-   },
-   {description => "Dr. Neuhaus Niccy (ISA PnP)", #24 irq, io0, io1 (from isapnp setup)
-    driver => 'hisax',
-    type => '24',
-    irq => '5',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   {description => "Dr. Neuhaus Niccy (PCI)", ##24 no parameter
-    driver => 'hisax',
-    type => '24',
-    card => 'pci',
-   },
-   {description => "AVM A1 (Fritz) (ISA non PnP)", #5 irq, io
-    driver => 'hisax',
-    type => '5',
-    irq => '10',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "AVM (ISA Pnp)", #27 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '27',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "AVM A1 (Fritz) (PCMCIA)", #26 irq, io (set with card manager)
-    driver => 'hisax',
-    type => '26',
-    irq => '',
-    card => 'isa',
-   },
-   {description => "AVM PCI (Fritz!) (PCI)", #27 no parameter
-    driver => 'hisax',
-    type => '27',
-    card => 'pci',
-   },
-   {description => "AVM B1 (PCI)",
-    driver => 'b1pci',
-    card => 'pci',
-   },
-   {description => "Siemens I-Surf 1.0 (ISA Pnp)", #29 irq, io, memory (from isapnp setup)   
-    driver => 'hisax',
-    type => '29',
-    irq => '9',
-    io => '0xd80',
-    mem => '0xd000',
-    card => 'isa',
-   },
-   {description => "ACER P10 (ISA Pnp)",	#30 irq, io (from isapnp setup)   
-    driver => 'hisax',
-    type => '30',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "HST Saphir (ISA Pnp)", #31 irq, io
-    driver => 'hisax',
-    type => '31',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "Telekom A4T (PCI)", #32 none
-    driver => 'hisax',
-    type => '32',
-    card => 'pci',
-   },
-   {description => "Scitel Quadro (PCI)", #33 subcontroller (4*S0, subctrl 1...4)
-    driver => 'hisax',
-    type => '33',
-    card => 'pci',
-   },
-   {description => "Gazel ISDN cards (ISA)", #34 irq,io
-    driver => 'hisax',
-    type => '34',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   {description => "Gazel ISDN cards (PCI)", #34 none
-    driver => 'hisax',
-    type => '34',
-    card => 'pci',
-   },
-   {description => "W6692 and Winbond based cards (PCI)", #36 none
-    driver => 'hisax',
-    type => '36',
-    card => 'pci',
-   },
-  );
-
-1;
diff --git a/perl-install/network/modem.pm b/perl-install/network/modem.pm
deleted file mode 100644
index 046ebbf8d..000000000
--- a/perl-install/network/modem.pm
+++ /dev/null
@@ -1,91 +0,0 @@
-package network::modem;
-
-use common;
-use any;
-use modules;
-use detect_devices;
-use mouse;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(pppConfig modem_detect_backend);
-
-sub configure{
-    my ($netcnx, $mouse, $netc) = @_;
-    $netcnx->{type}='modem';
-    $netcnx->{$netcnx->{type}}={};
-    $netcnx->{modem}{device}=$netc->{autodetect}{modem};
-  modem_step_1:
-    pppConfig($netcnx->{$netcnx->{type}}, $mouse, $netc) or return;
-    write_cnx_script($netc, "modem",
-q(
-/sbin/route del default
-ifup ppp0
-),
-q(ifdown ppp0
-killall pppd
-), $netcnx->{type});
-    1;
-}
-
-sub pppConfig {
-    my ($modem, $mouse, $netc) = @_;
-
-    $mouse ||={};
-    $mouse->{device} ||= readlink "$prefix/dev/mouse";
-    $::isInstall and $in->set_help('selectSerialPort');
-    $modem->{device} ||= $in->ask_from_listf('', _("Please choose which serial port your modem is connected to."),
-					     \&mouse::serial_port2text,
-					     [ grep { $_ ne $mouse->{device} } (mouse::serial_ports, if_(-e '/dev/modem', '/dev/modem')) ]) || return;
-
-    $::isStandalone || $in->set_help('configureNetworkISP');
-    $in->ask_from('', _("Dialup options"), [
-{ label => _("Connection name"), val => \$modem->{connection} },
-{ label => _("Phone number"), val => \$modem->{phone} },
-{ label => _("Login ID"), val => \$modem->{login} },
-{ label => _("Password"), val => \$modem->{passwd}, hidden => 1 },
-{ label => _("Authentication"), val => \$modem->{auth}, list => [ __("PAP"), __("Terminal-based"), __("Script-based"), __("CHAP") ] },
-{ label => _("Domain name"), val => \$modem->{domain} },
-{ label => _("First DNS Server (optional)"), val => \$modem->{dns1} },
-{ label => _("Second DNS Server (optional)"), val => \$modem->{dns2} },
-    ]) or return;
-    $netc->{DOMAINNAME2} = $modem->{domain};
-    any::pppConfig($in, $modem, $prefix);
-    $netc->{$_}='ppp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
-    1;
-}
-#-AT&F&O2B40
-#- DialString=ATDT0231389595((
-
-#- modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-#- input
-#-  $modem
-#-  $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-#- output:
-#-  $modem->{device} : device where the modem were detected
-sub modem_detect_backend {
-    my ($modem, $mouse) = @_;
-    $mouse ||={};
-    $mouse->{device} ||= readlink "/dev/mouse";
-    my $serdev = arch() =~ /ppc/ ? "macserial" : "serial";
-    eval { modules::load("$serdev") };
-
-    detect_devices::probeSerialDevices();
-    foreach ('modem', map { "ttyS$_" } (0..7)) {
-	next if $mouse->{device} =~ /$_/;
-	next unless -e "/dev/$_";
-	detect_devices::hasModem("/dev/$_") and $modem->{device} = "$_", last;
-    }
-
-    #- add an alias for macserial on PPC
-    modules::add_alias('serial', $serdev) if (arch() =~ /ppc/ && $modem->{device});
-    my @devs = detect_devices::pcmcia_probe();
-    foreach (@devs) {
-	$_->{type} =~ /serial/ and $modem->{device} = $_->{device};
-    }
-
-}
-
-1;
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
deleted file mode 100644
index 4998124a1..000000000
--- a/perl-install/network/netconnect.pm
+++ /dev/null
@@ -1,629 +0,0 @@
-
-package network::netconnect;
-
-use diagnostics;
-use strict;
-use vars qw($isdn_init @isdndata @EXPORT);
-
-use common;
-use log;
-use detect_devices;
-use run_program;
-use modules;
-use any;
-use mouse;
-use network;
-
-use network::tools;
-use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file $connect_prog);
-
-@EXPORT = qw(start_internet stop_internet);
-
-#- intro is called only in standalone.
-sub intro {
-    my ($prefix, $netcnx, $in) = @_;
-    my ($netc, $mouse, $intf) = ({}, {}, {});
-    my $text;
-    my $connected;
-    my $connect_file = "/etc/sysconfig/network-scripts/net_cnx_up";
-    my $disconnect_file = "/etc/sysconfig/network-scripts/net_cnx_down";
-    my $connect_prog = "/etc/sysconfig/network-scripts/net_cnx_pg";
-    read_net_conf($prefix, $netcnx, $netc);
-    if (!$::isWizard) {
-	if (connected()) {
-	    $text=_("You are currently connected to internet.") . (-e $disconnect_file ? _("\nYou can disconnect or reconfigure your connection.") : _("\nYou can reconfigure your connection."));
-	    $connected=1;
-	} else {
-	    $text=_("You are not currently connected to Internet.") . (-e $connect_file ? _("\nYou can connect to Internet or reconfigure your connection.") : _("\nYou can reconfigure your connection."));
-	    $connected=0;
-	}
-	my @l=(
-	       !$connected && -e $connect_file ? { description => _("Connect"),
-						   c => 1} : (),
-	       $connected && -e $disconnect_file ? { description => _("Disconnect"),
-						     c => 2} : (),
-	       { description => _("Configure the connection"),
-		 c => 3},
-	       { description => _("Cancel"),
-		 c => 4},
-	      );
-	my $e = $in->ask_from_listf(_("Internet connection & configuration"),
-				    _($text),
-				    sub { $_[0]{description} },
-				    \@l );
-	run_program::rooted($prefix, $connect_prog) if ($e->{c}==1);
-	run_program::rooted($prefix, $disconnect_file) if ($e->{c}==2);
-	main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0) if ($e->{c}==3);
-	$in->exit(0) if ($e->{c}==4);
-    } else {
-	main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0);
-    }
-}
-
-sub detect {
-    my ($auto_detect, $net_install) = @_;
-    my $isdn={};
-    require network::isdn;
-    network::isdn->import;
-    isdn_detect_backend($isdn);
-    $auto_detect->{isdn}{$_}=$isdn->{$_} foreach qw(description vendor id driver card_type type);
-    $auto_detect->{isdn}{description} =~ s/.*\|//;
-
-    modules::load_category('network/main|usb');
-    require network::ethernet;
-    network::ethernet->import;
-    my @all_cards = conf_network_card_backend (undef, undef, undef, undef, undef, undef);
-    require network::adsl;
-    network::adsl->import;
-    map {
-	( !$net_install and adsl_detect($_->[0]) ) ? $auto_detect->{adsl}=$_->[0] : $auto_detect->{lan}{$_->[0]}=$_->[1]; } @all_cards;
-    my $modem={};
-    require network::modem;
-    network::modem->import;
-    modem_detect_backend($modem);#, $mouse);
-    $modem->{device} and $auto_detect->{modem}=$modem->{device};
-}
-
-sub pre_func {
-    my ($text) = @_;
-    $in->isa('interactive_gtk') or return;
-    $::Wizard_no_previous=1;
-    if ($::isStandalone) {
-	$::Wizard_splash=1;
-	require my_gtk;
-	my_gtk->import(qw(:wrappers));
-	my $W = my_gtk->new(_("Network Configuration Wizard"));
-	gtkadd($W->{window},
-	       gtkpack_(new Gtk::VBox(0, 0),
-			1, write_on_pixmap(gtkpng ("draknet_step"),
-					   20,200,
-					   _("We are now going to configure the %s connection.",_($text)),
-					  ),
-			0, $W->create_okcancel(_("OK"))
-		       )
-	      );
-	$W->main;
-	$::Wizard_splash=0;
-    } else {
-	#- for i18n : %s is the type of connection of the list: (modem, isdn, adsl, cable, local network);
-	$in->ask_okcancel(_("Network Configuration Wizard"), _("\n\n\nWe are now going to configure the %s connection.\n\n\nPress OK to continue.",_($_[0])), 1);
-    }
-    undef $::Wizard_no_previous;
-}
-
-sub init_globals {
-    my ($in, $prefix) = @_;
-    MDK::Common::Globals::init(
-			       in => $in,
-			       prefix => $prefix,
-			       connect_file => "/etc/sysconfig/network-scripts/net_cnx_up",
-			       disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down",
-			       connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg" );
-}
-
-sub main {
-    my ($prefix, $netcnx, $netc, $mouse, $in, $intf, $first_time, $direct_fr, $noauto) = @_;
-    init_globals ($in, $prefix);
-    $netc->{minus_one}=0; #When one configure an eth in dhcp without gateway
-    $::isInstall and $in->set_help('configureNetwork');
-    $::isStandalone and read_net_conf($prefix, $netcnx, $netc); # REDONDANCE with intro. FIXME
-    $netc->{NET_DEVICE}=$netcnx->{NET_DEVICE} if $netcnx->{NET_DEVICE}; # REDONDANCE with read_conf. FIXME
-    $netc->{NET_INTERFACE}=$netcnx->{NET_INTERFACE} if $netcnx->{NET_INTERFACE}; # REDONDANCE with read_conf. FIXME
-    network::read_all_conf($prefix, $netc ||= {}, $intf ||= {});
-
-    modules::mergein_conf("$prefix/etc/modules.conf");
-
-    my $direct_net_install;
-    if ($first_time && $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs")) {
-	(!($::expert || $noauto) or $in->ask_okcancel(_("Network Configuration"),
-						      _("Because you are doing a network installation, your network is already configured.
-Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
-"), 1)) and do {
-    $netcnx->{type}='lan';
-    output "$prefix$connect_file",
-      qq(
-ifup eth0
-);
-    output "$prefix$disconnect_file",
-      qq(
-ifdown eth0
-);
-    chmod 0755, "$prefix$disconnect_file";
-    chmod 0755, "$prefix$connect_file";
-    $direct_net_install = 1;
-    goto step_5;
-};
-    }
-
-    $netc->{autodetection}=1;
-    $netc->{autodetect}={};
-
-  step_1:
-    $::Wizard_no_previous=1;
-    my @profiles=get_profiles();
-    $in->ask_from(_("Network Configuration Wizard"),
-		  _("Welcome to The Network Configuration Wizard.
-
-We are about to configure your internet/network connection.
-If you don't want to use the auto detection, deselect the checkbox.
-"),
-		  [
-		   if_(@profiles > 1, { label => _("Choose the profile to configure"), val => \$netcnx->{PROFILE}, list => \@profiles }),
-		   { label => _("Use auto detection"), val => \$netc->{autodetection}, type => 'bool' },
-		   if_($::isStandalone, { label => _("Expert Mode"), val => \$::expert, type => 'bool' }),
-		  ]
-		 ) or goto step_5;
-    undef $::Wizard_no_previous;
-    set_profile($netcnx);
-    if ($netc->{autodetection}) {
-	my $w = $in->wait_message(_("Network Configuration Wizard"), _("Detecting devices..."));
-	detect($netc->{autodetect}, $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs"));
-    }
-
-  step_2:
-
-    my $set_default;
-    my %conf;
-    $conf{$_} = $netc->{autodetect}{$_} ? 1 : 0 foreach 'modem', 'adsl', 'cable', 'lan';
-    $conf{isdn} = $netc->{autodetect}{isdn}{description} ? 1: 0;
-    my @l = (
-	     [_("Normal modem connection"), $netc->{autodetect}{modem}, __("detected on port %s"), \$conf{modem}],
-	     [_("ISDN connection"), $netc->{autodetect}{isdn}{description}, __("detected %s"), \$conf{isdn}],
-	     [_("ADSL connection"), $netc->{autodetect}{adsl}, __("detected on interface %s"), \$conf{adsl}],
-	     [_("Cable connection"), $netc->{autodetect}{cable}, __("cable connection detected"), \$conf{cable}],
-	     [_("LAN connection"), $netc->{autodetect}{lan}, __("ethernet card(s) detected"), \$conf{lan}]
-	);
-    my $i=0;
-    map { defined $set_default or do { $_->[1] and $set_default=$i; }; $i++; } @l;
-    @l = (
-[_("Normal modem connection") . if_($netc->{autodetect}{modem}, " - " . _("detected on port %s", $netc->{autodetect}{modem})), \$conf{modem}],
-[_("ISDN connection") . if_($netc->{autodetect}{isdn}{description}, " - " . _("detected %s", $netc->{autodetect}{isdn}{description})), \$conf{isdn}],
-[_("ADSL connection") . if_($netc->{autodetect}{adsl}, " - " . _("detected on interface %s", $netc->{autodetect}{adsl})), \$conf{adsl}],
-[_("Cable connection") . if_($netc->{autodetect}{cable}, " - " . _("cable connection detected")), \$conf{cable}],
-[_("LAN connection") . if_($netc->{autodetect}{lan}, " - " . _("ethernet card(s) detected")), \$conf{lan}]
-);
-    $::isInstall and $in->set_help('configureNetwork');
-    my $e = $in->ask_from(_("Network Configuration Wizard"), _("Choose the connection you want to configure"),
-			  [ map { { label => $_->[0], val => $_->[1], type => 'bool' } } @l ],
-			  changed => sub {
-			      return if !$netc->{autodetection};
-			      my $c = 0;
-#-			      $conf{adsl} and $c++;
-			      $conf{cable} and $c++;
-			      my $a = keys(%{$netc->{autodetect}{lan}});
-			      0 < $a && $a <= $c and $conf{lan} = undef;
-			  }
-			 ) or goto step_1;
-
-#    load_conf ($netcnx, $netc, $intf);
-    $conf{modem} and do { pre_func("modem"); require network::modem; network::modem::configure($netcnx, $mouse, $netc) or goto step_2 };
-    $conf{isdn} and do { pre_func("isdn"); require network::isdn; network::isdn::configure($netcnx, $netc) or goto step_2 };
-    $conf{adsl} and do { pre_func("adsl"); require network::adsl; network::adsl::configure($netcnx, $netc, $intf, $first_time) or goto step_2};
-    $conf{cable} and do { pre_func("cable"); require network::ethernet; network::ethernet::configure_cable($netcnx, $netc, $intf, $first_time) or goto step_2; $netconnect::need_restart_network = 1; };
-    $conf{lan} and do { pre_func("local network"); require network::ethernet; network::ethernet::configure_lan($netcnx, $netc, $intf, $first_time) or goto step_2; $netconnect::need_restart_network = 1; };
-
-  step_2_1:
-    my $nb = keys %{$netc->{internet_cnx}};
-    if ($nb < 1) {
-    } elsif ($nb > 1) {
-	$in->ask_from(_("Network Configuration Wizard"),
-		      _("You have configured multiple ways to connect to the Internet.\nChoose the one you want to use.\n\n" . if_(!$::isStandalone, "You may want to configure some profiles after the installation, in the Mandrake Control Center")),
-		      [ { label => _("Internet connection"), val => \$netc->{internet_cnx_choice}, list => [ keys %{$netc->{internet_cnx}} ]} ]
-		     ) or goto step_2;
-    } elsif ($nb == 1) {
-	$netc->{internet_cnx_choice} = (keys %{$netc->{internet_cnx}})[0];
-    }
-    member($netc->{internet_cnx_choice}, ('adsl', 'isdn')) and
-      $netc->{at_boot} = $in->ask_yesorno(_("Network Configuration Wizard"), _("Do you want to start the connection at boot?"));
-    if ($netc->{internet_cnx_choice} ) {
-	write_cnx_script($netc);
-	$netcnx->{type} = $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{type};
-    } else {
-	unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_up";
-	unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_down";
-	undef $netc->{NET_DEVICE};
-    }
-
-    my $success = 1;
-    network::configureNetwork2($in, $prefix, $netc, $intf);
-    my $network_configured = 1;
-
-    if ($netconnect::need_restart_network && $::isStandalone and ($::expert or $in->ask_yesorno(_("Network configuration"),
-							  _("The network needs to be restarted"), 1))) {
-#-	run_program::rooted($prefix, "/etc/rc.d/init.d/network stop");
-	if (!run_program::rooted($prefix, "/etc/rc.d/init.d/network restart")) {
-	    $success = 0;
-	    $in->ask_okcancel(_("Network Configuration"), _("A problem occured while restarting the network: \n\n%s", `/etc/rc.d/init.d/network restart`), 0);
-	}
-    }
-
-    write_initscript();
-    $::isStandalone && member($netc->{internet_cnx_choice}, ('modem', 'adsl', 'isdn')) and
-      $success = ask_connect_now($netc->{internet_cnx_choice});
-
-  step_3:
-
-    my $m = $success ? _("Congratulations, the network and Internet configuration is finished.
-The configuration will now be applied to your system.
-
-") . if_($::isStandalone && $in->isa('interactive_gtk'),
-_("After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."))
-      : _("Problems occured during configuration.
-Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.");
-    if ($::isWizard) {
-	$::Wizard_no_previous=1;
-	$::Wizard_finished=1;
-	$in->ask_okcancel(_("Network Configuration"), $m, 1);
-	undef $::Wizard_no_previous;
-	undef $::Wizard_finished;
-    } else {  $::isStandalone and $in->ask_warn('', $m ); }
-
-  step_5:
-
-    $network_configured or network::configureNetwork2($in, $prefix, $netc, $intf);
-
-    if ($netcnx->{type} =~ /modem/ || $netcnx->{type} =~ /isdn_external/) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-if [ -e /usr/bin/kppp ]; then
-/sbin/route del default
-/usr/bin/kppp &
-else
-/usr/sbin/net_monitor --connect
-fi
-else
-$connect_file
-fi
-);
-    } elsif ($netcnx->{type}) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-/usr/sbin/net_monitor --connect
-else
-$connect_file
-fi
-);
-    } else {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-/usr/sbin/draknet
-);
-    }
-    if ($direct_net_install) {
-	output "$prefix$connect_prog",
-	  qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-/usr/sbin/net_monitor --connect
-else
-$connect_file
-fi
-);
-    }
-    chmod 0755, "$prefix$connect_prog";
-    $netcnx->{$_}=$netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
-
-    $netcnx->{NET_INTERFACE} and set_net_conf($netcnx, $netc);
-    $netcnx->{type} =~ /adsl/ or system("/sbin/chkconfig --del adsl 2> /dev/null");
-    save_conf($netcnx, $netc, $intf);
-
-#-    if ($netc->{NET_DEVICE} and $netc->{NETWORKING} ne 'no' and $::isStandalone and $::expert) {
-#-	  exists $netc->{nb_cards} or do {
-#-	      any::load_category($in, 'network/main|usb', !$::expert, 1);
-#-	      $netc->{nb_cards} = listlength(detect_devices::getNet());
-#-	  };
-#-	  ($netc->{nb_cards} - $netc->{minus_one} - (get_net_device($prefix) =~ /eth.+/ ? 1 : 0) > 0) and $in->ask_okcancel(_("Network Configuration"),
-#-_("Now that your Internet connection is configured,
-#-your computer can be configured to share its Internet connection.
-#-Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
-#-
-#-Would you like to setup the Internet Connection Sharing?
-#-"), 1) and system("/usr/sbin/drakgw --direct");
-#-    }
-}
-
-sub save_conf {
-    my ($netcnx, $netc, $intf)=@_;
-    my $adsl;
-    my $modem;
-    my $isdn;
-    $netcnx->{type} =~ /adsl/ and $adsl=$netcnx->{$netcnx->{type}};
-    $netcnx->{type} eq 'isdn_external' || $netcnx->{type} eq 'modem' and $modem=$netcnx->{$netcnx->{type}};
-    $netcnx->{type} eq 'isdn_internal' and $isdn=$netcnx->{$netcnx->{type}};
-    modules::load_category('network/main|usb');
-    require network::ethernet;
-    network::ethernet->import;
-    my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-
-    $intf = { %$intf };
-
-    output("$prefix/etc/sysconfig/network-scripts/draknet_conf",
-      "SystemName=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-DomainName=" . do { $netc->{HOSTNAME} =~ /\.(.*)/; $1 } . "
-InternetAccessType=" . do { if ($netcnx->{type}) { $netcnx->{type}; } else { $netc->{GATEWAY} ? "lan" : ""; } } . "
-InternetInterface=" . ($netc->{GATEWAY} && (!$netcnx->{type} || $netcnx->{type} eq 'lan') ? $netc->{NET_DEVICE} : $netcnx->{NET_INTERFACE}) . "
-InternetGateway=$netc->{GATEWAY}
-DNSPrimaryIP=$netc->{dnsServer}
-DNSSecondaryIP=$netc->{dnsServer2}
-DNSThirdIP=$netc->{dnsServer3}
-AdminInterface=
-
-" . join ('', map {
-"Eth${_}Known=" . ($intf->{"eth$_"}->{DEVICE} eq "eth$_" ? 'true' : 'false') . "
-Eth${_}IP=" . $intf->{"eth$_"}{IPADDR} . "
-Eth${_}Mask=" . $intf->{"eth$_"}{NETMASK} . "
-Eth${_}Mac=
-Eth${_}BootProto=" . $intf->{"eth$_"}{BOOTPROTO} . "
-Eth${_}OnBoot=" . $intf->{"eth$_"}{ONBOOT} . "
-Eth${_}Hostname=$netc->{HOSTNAME}
-Eth${_}HostAlias=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-Eth${_}Driver=$all_cards[$_]->[1]
-Eth${_}Irq=
-Eth${_}Port=
-Eth${_}DHCPClient=" . ($intf->{"eth$_"}{BOOTPROTO} eq 'dhcp' ? $netcnx->{dhcp_client} : '') . "
-Eth${_}DHCPServerName=" . ($intf->{"eth$_"}{BOOTPROTO} eq 'dhcp' ? $netc->{HOSTNAME} : '') . "\n"
- } (0..9)) .
-"
-
-ISDNDriver=$isdn->{driver}
-ISDNDeviceType=$isdn->{type}
-ISDNIrq=$isdn->{irq}
-ISDNMem=$isdn->{mem}
-ISDNIo=$isdn->{io}
-ISDNIo0=$isdn->{io0}
-ISDNIo1=$isdn->{io1}
-ISDNProtocol=$isdn->{protocol}
-ISDNCardDescription=$isdn->{description}
-ISDNCardVendor=$isdn->{vendor}
-ISDNId=$isdn->{id}
-ISDNProvider=$netc->{DOMAINNAME2}
-ISDNProviderPhone=$isdn->{phone_out}
-ISDNProviderDomain=" . do { $netc->{DOMAINNAME2} =~ /\.(.*)/; $1} . "
-ISDNProviderDNS1=$netc->{dnsServer2}
-ISDNProviderDNS2=$netc->{dnsServer3}
-ISDNDialing=$isdn->{dialing_mode}
-ISDNSpeed=$isdn->{speed}
-ISDNTimeout=$isdn->{huptimeout}
-ISDNHomePhone=$isdn->{phone_in}
-ISDNLogin=$isdn->{login}
-ISDNPassword=$isdn->{passwd}
-ISDNConfirmPassword=$isdn->{passwd2}
-
-PPPInterfacesList=
-PPPDevice=$modem->{device}
-PPPDeviceSpeed=
-PPPConnectionName=$modem->{connection}
-PPPProviderPhone=$modem->{phone}
-PPPProviderDomain=$modem->{domain}
-PPPProviderDNS1=$modem->{dns1}
-PPPProviderDNS2=$modem->{dns2}
-PPPLogin=$modem->{login}
-PPPPassword=$modem->{passwd}
-PPPConfirmPassword=$modem->{passwd}
-PPPAuthentication=$modem->{auth}
-PPPSpecialCommand=" . ($netcnx->{type} eq 'isdn_external' ? $netcnx->{isdn_external}{special_command} : '' ) . "
-
-ADSLInterfacesList=
-ADSLModem=" .  q( # Obsolete information. Please don't use it.) . "
-ADSLType=" . ($netcnx->{type} =~ /adsl/ ? $netcnx->{type} : '') . "
-ADSLProviderDomain=$netc->{DOMAINNAME2}
-ADSLProviderDNS1=$netc->{dnsServer2}
-ADSLProviderDNS2=$netc->{dnsServer3}
-ADSLLogin=$adsl->{login}
-ADSLPassword=$adsl->{passwd}
-DOMAINNAME2=$netc->{DOMAINNAME2}"
-	  );
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    my $a = $netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default";
-    cp_af("$prefix/etc/sysconfig/network-scripts/draknet_conf", "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $a);
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $a;
-    foreach ( ["$prefix$connect_file", "up"],
-	      ["$prefix$disconnect_file", "down"],
-	      ["$prefix$connect_prog", "prog"],
-	      ["$prefix/etc/ppp/ioptions1B", "iop1B"],
-	      ["$prefix/etc/ppp/ioptions2B", "iop2B"],
-	      ["$prefix/etc/isdn/isdn1B.conf", "isdn1B"],
-	      ["$prefix/etc/isdn/isdn2B.conf", "isdn2B"],
-	      ["$prefix/etc/resolv.conf", "resolv"],
-	      ["$prefix/etc/ppp/peers/adsl", "speedtouch"],
-	    ) {
-	my $file = "$prefix/etc/sysconfig/network-scripts/net_" . $_->[1] . "." . $a;
-	-e ($_->[0]) and cp_af($_->[0], $file) and chmod 0755, $file;
-    }
-}
-
-sub set_profile {
-    my ($netcnx, $profile) = @_;
-    $profile ||= $netcnx->{PROFILE};
-    $profile or return;
-    my $f = "$prefix/etc/sysconfig/network-scripts/draknet_conf";
-    -e ($f . "." . $profile) or return;
-    $netcnx->{PROFILE}=$profile;
-    cp_af($f . "." . $profile, $f);
-    foreach ( ["$prefix$connect_file", "up"],
-	      ["$prefix$disconnect_file", "down"],
-	      ["$prefix$connect_prog", "prog"],
-	      ["$prefix/etc/ppp/ioptions1B", "iop1B"],
-	      ["$prefix/etc/ppp/ioptions2B", "iop2B"],
-	      ["$prefix/etc/isdn/isdn1B.conf", "isdn1B"],
-	      ["$prefix/etc/isdn/isdn2B.conf", "isdn2B"],
-	      ["$prefix/etc/resolv.conf", "resolv"],
-	      ["$prefix/etc/ppp/peers/adsl", "speedtouch"],
-	    ) {
-	my $c = "$prefix/etc/sysconfig/network-scripts/net_" . $_->[1] . "." . $profile;
-	-e ($c) and cp_af($c, $_->[0]);
-    }
-}
-
-sub del_profile {
-    my ($netcnx, $profile) = @_;
-    $profile or return;
-    $profile eq "default" and return;
-    rm_rf("$prefix/etc/sysconfig/network-scripts/draknet_conf." . $profile);
-    rm_rf(glob_("$prefix/etc/sysconfig/network-scripts/net_{up,down,prog,iop1B,iop2B,isdn1B,isdn2B,resolv,speedtouch}." . $profile));
-}
-
-sub add_profile {
-    my ($netcnx, $profile) = @_;
-    $profile or return;
-    $profile eq "default" and return;
-    my $cmd1 = "$prefix/etc/sysconfig/network-scripts/draknet_conf." . ($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
-    my $cmd2 = "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $profile;
-    cp_af($cmd1, $cmd2);
-}
-
-sub get_profiles {
-    my @a;
-    my $i=0;
-    foreach (glob("/etc/sysconfig/network-scripts/draknet_conf.*")) {
-	s/.*\.//;
-	$a[$i] = $_;
-	$i++;
-    }
-    @a;
-}
-
-sub load_conf {
-    my ($netcnx, $netc, $intf)=@_;
-    my $adsl_pptp={};
-    my $adsl_pppoe={};
-    my $modem={};
-    my $isdn_external={};
-    my $isdn={};
-    my $system_name;
-    my $domain_name;
-
-    if (-e "$prefix/etc/sysconfig/network-scripts/draknet_conf") {
-	foreach (cat_("$prefix/etc/sysconfig/network-scripts/draknet_conf")) {
-	    /^DNSPrimaryIP=(.*)$/ and $netc->{dnsServer} = $1;
-	    /^DNSSecondaryIP=(.*)$/ and $netc->{dnsServer2} = $1;
-	    /^DNSThirdIP=(.*)$/ and $netc->{dnsServer3} = $1;
-	    /^InternetAccessType=(.*)$/ and $netcnx->{type} = $1;
-	    /^InternetInterface=(.*)$/ and $netcnx->{NET_INTERFACE} = $1;
-	    /^InternetGateway=(.*)$/ and $netc->{GATEWAY} = $1;
-	    /^SystemName=(.*)$/ and $system_name = $1;
-	    /^DomainName=(.*)$/ and $domain_name = $1;
-	    /^Eth([0-9])Known=true$/ and $intf->{"eth$1"}->{DEVICE} = "eth$1";
-	    /^Eth([0-9])IP=(.*)$/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{IPADDR} = $2;
-	    /^Eth([0-9])Mask=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{NETMASK} = $2;
-	    /^Eth([0-9])BootProto=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{BOOTPROTO} = $2;
-	    /^Eth([0-9])OnBoot=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{ONBOOT} = $2;
-	    /^Eth([0-9])Hostname=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $netc->{HOSTNAME} = $2;
-	    /^Eth([0-9])Driver=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{driver} = $2;
-	    /^ISDNDriver=(.*)$/ and $isdn->{driver} = $1;
-	    /^ISDNDeviceType=(.*)$/ and $isdn->{type} = $1;
-	    /^ISDNIrq=(.*)/ and $isdn->{irq} = $1;
-	    /^ISDNMem=(.*)$/ and $isdn->{mem} = $1;
-	    /^ISDNIo=(.*)$/ and $isdn->{io} = $1;
-	    /^ISDNIo0=(.*)$/ and $isdn->{io0} = $1;
-	    /^ISDNIo1=(.*)$/ and $isdn->{io1} = $1;
-	    /^ISDNProtocol=(.*)$/ and $isdn->{protocol} = $1;
-	    /^ISDNCardDescription=(.*)$/ and $isdn->{description} = $1;
-	    /^ISDNCardVendor=(.*)$/ and $isdn->{vendor} = $1;
-	    /^ISDNId=(.*)$/ and $isdn->{id} = $1;
-	    /^ISDNProviderPhone=(.*)$/ and $isdn->{phone_out} = $1;
-	    /^ISDNDialing=(.*)$/ and $isdn->{dialing_mode} = $1;
-	    /^ISDNISDNSpeed=(.*)$/ and $isdn->{speed} = $1;
-	    /^ISDNTimeout=(.*)$/ and $isdn->{huptimeout} = $1;
-	    /^ISDNHomePhone=(.*)$/ and $isdn->{phone_in} = $1;
-	    /^ISDNLogin=(.*)$/ and $isdn->{login} = $1;
-	    /^ISDNPassword=(.*)$/ and $isdn->{passwd} = $1;
-	    /^ISDNConfirmPassword=(.*)$/ and $isdn->{passwd2} = $1;
-
-	    /^PPPDevice=(.*)$/ and $modem->{device} = $1;
-	    /^PPPConnectionName=(.*)$/ and $modem->{connection} = $1;
-	    /^PPPProviderPhone=(.*)$/ and $modem->{phone} = $1;
-	    /^PPPProviderDomain=(.*)$/ and $modem->{domain} = $1;
-	    /^PPPProviderDNS1=(.*)$/ and $modem->{dns1} = $1;
-	    /^PPPProviderDNS2=(.*)$/ and $modem->{dns2} = $1;
-	    /^PPPLogin=(.*)$/ and $modem->{login} = $1;
-	    /^PPPPassword=(.*)$/ and $modem->{passwd} = $1;
-	    /^PPPAuthentication=(.*)$/ and $modem->{auth} = $1;
-	    if (/^PPPSpecialCommand=(.*)$/) {
-		$netcnx->{type} eq 'isdn_external' and $netcnx->{$netcnx->{type}}{special_command} = $1;
-	    }
-	    /^ADSLLogin=(.*)$/ and $adsl_pppoe->{login} = $1;
-	    /^ADSLPassword=(.*)$/ and $adsl_pppoe->{passwd} = $1;
-	    /^DOMAINNAME2=(.*)$/ and $netc->{DOMAINNAME2} = $1;
-	}
-    }
-    $system_name && $domain_name and $netc->{HOSTNAME}=join ('.', $system_name, $domain_name);
-    $adsl_pptp->{$_}=$adsl_pppoe->{$_} foreach ('login', 'passwd', 'passwd2');
-    $isdn_external->{$_}=$modem->{$_} foreach ('device', 'connection', 'phone', 'domain', 'dns1', 'dns2', 'login', 'passwd', 'auth');
-    $netcnx->{adsl_pptp}=$adsl_pptp;
-    $netcnx->{adsl_pppoe}=$adsl_pppoe;
-    $netcnx->{modem}=$modem;
-    $netcnx->{modem}=$isdn_external;
-    $netcnx->{isdn_internal}=$isdn;
-    -e "$prefix/etc/sysconfig/network" and put_in_hash($netc,network::read_conf("$prefix/etc/sysconfig/network"));
-    foreach (glob_("$prefix/etc/sysconfig/ifcfg-*")) {
-	my $l = network::read_interface_conf($_);
-	$intf->{$l->{DEVICE}} = $l;
-    }
-    my $file = "$prefix/etc/resolv.conf";
-    if (-e $file) {
-	put_in_hash($netc, network::read_resolv_conf($file));
-    }
-}
-
-sub get_net_device {
-    ${{ getVarsFromSh("/etc/sysconfig/draknet") }}{NET_DEVICE};
-}
-
-sub read_net_conf {
-    my ($prefix, $netcnx, $netc)=@_;
-    add2hash($netcnx, { getVarsFromSh("$prefix/etc/sysconfig/draknet") });
-    $netc->{$_} = $netcnx->{$_} foreach 'NET_DEVICE', 'NET_INTERFACE';
-    $netcnx->{$netcnx->{type}}||={};
-    add2hash($netcnx->{$netcnx->{type}}, { getVarsFromSh("$prefix/etc/sysconfig/draknet." . $netcnx->{type}) });
-}
-
-sub set_net_conf {
-    my ($netcnx, $netc)=@_;
-    setVarsInShMode("$prefix/etc/sysconfig/draknet", 0600, $netcnx, "NET_DEVICE", "NET_INTERFACE", "type", "PROFILE" );
-    setVarsInShMode("$prefix/etc/sysconfig/draknet." . $netcnx->{type}, 0600, $netcnx->{$netcnx->{type}}); #- doesn't work, don't know why
-    setVarsInShMode("$prefix/etc/sysconfig/draknet.netc", 0600, $netc); #- doesn't work, don't know why
-}
-
-sub start_internet {
-    my ($o) = @_;
-    init_globals ($o, $o->{prefix});
-    run_program::rooted($prefix, $connect_file);
-}
-
-sub stop_internet {
-    my ($o) = @_;
-    init_globals ($o, $o->{prefix});
-    run_program::rooted($prefix, $disconnect_file);
-}
-
-#---------------------------------------------
-#                WONDERFULL pad
-#---------------------------------------------
-1;
diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm
deleted file mode 100644
index 60d8ffd41..000000000
--- a/perl-install/network/network.pm
+++ /dev/null
@@ -1,460 +0,0 @@
-package network::network; # $Id$wir
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use Socket;
-
-use common;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(resolv configureNetworkIntf netmask dns is_ip masked_ip findIntf addDefaultRoute all write_interface_conf read_all_conf dnsServers guessHostname configureNetworkNet read_resolv_conf getVarsFromSh read_interface_conf add2hosts gateway configureNetwork2 write_conf sethostname miscellaneousNetwork down_it read_conf write_resolv_conf up_it);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub read_conf {
-    my ($file) = @_;
-    my %netc = getVarsFromSh($file);
-    \%netc;
-}
-
-sub read_resolv_conf {
-    my ($file) = @_;
-    my @l = qw(dnsServer dnsServer2 dnsServer3);
-    my %netc;
-
-    local *F; open F, $file or die "cannot open $file: $!";
-    local $_;
-    while (<F>) {
-	/^\s*nameserver\s+(\S+)/ and $netc{shift @l} = $1;
-    }
-    \%netc;
-}
-
-sub read_interface_conf {
-    my ($file) = @_;
-    my %intf = getVarsFromSh($file) or die "cannot open file $file: $!";
-
-    $intf{BOOTPROTO} ||= 'static';
-    $intf{isPtp} = $intf{NETWORK} eq '255.255.255.255';
-    $intf{isUp} = 1;
-    \%intf;
-}
-
-sub up_it {
-    my ($prefix, $intfs) = @_;
-    $_->{isUp} and return foreach values %$intfs;
-    my $f = "/etc/resolv.conf"; symlink "$prefix/$f", $f;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/network", "start");
-    $_->{isUp} = 1 foreach values %$intfs;
-}
-
-sub down_it {
-    my ($prefix, $intfs) = @_;
-    run_program::rooted($prefix, "/etc/rc.d/init.d/network", "stop");
-    $_->{isUp} = 1 foreach values %$intfs;
-}
-
-sub write_conf {
-    my ($file, $netc) = @_;
-
-    if ($netc->{HOSTNAME}) {
-	$netc->{HOSTNAME} =~ /\.(.*)$/;
-	$1 and $netc->{DOMAINNAME} = $1;
-    }
-    ($netc->{DOMAINNAME}) ||= 'localdomain';
-    add2hash($netc, {
-		     NETWORKING => "yes",
-		     FORWARD_IPV4 => "false",
-		     HOSTNAME => "localhost.$netc->{DOMAINNAME}",
-		    });
-
-    setVarsInSh($file, $netc, qw(NETWORKING FORWARD_IPV4 DHCP_HOSTNAME HOSTNAME DOMAINNAME GATEWAY GATEWAYDEV NISDOMAIN));
-}
-
-sub write_resolv_conf {
-    my ($file, $netc) = @_;
-
-    #- get the list of used dns.
-    my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
-
-    unless ($netc->{DOMAINNAME} || $netc->{DOMAINNAME2} || keys %used_dns > 0) {
-	unlink($file);
-	log::l("neither domain name nor dns server are configured");
-	return 0;
-    }
-
-    my (%search, %dns, @unknown);
-    local *F; open F, $file;
-    local $_;
-#-    my $options;
-    while (<F>) {
-#-	if (/^[\s]*(options\s+[^#]*).*$/) { $options = $1; $options =~ s/timeout:\d+/timeout:1/; next }
-	/^[#\s]*search\s+(.*?)\s*$/ and $search{$1} = $., next;
-	/^[#\s]*nameserver\s+(.*?)\s*$/ and $dns{$1} = $., next;
-	/^.*# ppp temp entry\s*$/ and next;
-	/^[#\s]*(\S.*?)\s*$/ and push @unknown, $1;
-    }
-#-    $options ||= "options timeout:1";
-
-    close F; open F, ">$file" or die "cannot write $file: $!";
-    print F "# search $_\n" foreach grep { $_ ne "$netc->{DOMAINNAME} $netc->{DOMAINNAME2}" } sort { $search{$a} <=> $search{$b} } keys %search;
-    print F "search $netc->{DOMAINNAME} $netc->{DOMAINNAME2}\n" if ($netc->{DOMAINNAME} || $netc->{DOMAINNAME2});
-#-    print F "$options\n\n";
-    print F "# nameserver $_\n" foreach grep { ! exists $used_dns{$_} } sort { $dns{$a} <=> $dns{$b} } keys %dns;
-    print F "nameserver $_\n" foreach  sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
-    print F "\n";
-    print F "# $_\n" foreach @unknown;
-    print F "\n";
-    print F "# ppp temp entry\n";
-
-    #-res_init();		# reinit the resolver so DNS changes take affect
-    1;
-}
-
-sub write_interface_conf {
-    my ($file, $intf, $prefix) = @_;
-
-    my @ip = split '\.', $intf->{IPADDR};
-    my @mask = split '\.', $intf->{NETMASK};
-    my $hwaddr;
-    $::o->{miscellaneous}{track_network_id} and $hwaddr = -e "$prefix/sbin/ip" && `LC_ALL= LANG= $prefix/sbin/ip -o link show $intf->{DEVICE} 2>/dev/null`;
-    if ($hwaddr) { chomp $hwaddr; $hwaddr =~ s/.*link\/ether\s([0-9a-z:]+)\s.*/$1/; }
-    $hwaddr and $intf->{HWADDR} = undef;
-    add2hash($intf, {
-		     BROADCAST => join('.', mapn { int $_[0] | ~int $_[1] & 255 } \@ip, \@mask),
-		     NETWORK   => join('.', mapn { int $_[0] &      $_[1]       } \@ip, \@mask),
-		     ONBOOT => bool2yesno(!member($intf->{DEVICE}, map { $_->{device} } detect_devices::probeall())),
-		     if_($::o->{miscellaneous}{track_network_id}, HWADDR => $hwaddr)
-		    });
-    setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR), ($intf->{wireless_eth}) ? qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV) : ());
-}
-
-sub add2hosts {
-    my ($file, $hostname, @ips) = @_;
-    my %l;
-    $l{$_} = $hostname foreach @ips;
-
-    local *F;
-    if (-e $file) {
-	open F, $file or die "cannot open $file: $!";
-	/\s*(\S+)(.*)/ and $l{$1} ||= $2 foreach <F>;
-    }
-    log::l("writing host information to $file");
-    open F, ">$file" or die "cannot write $file: $!";
-    while (my ($ip, $v) = each %l) {
-	$ip or next;
-	print F "$ip";
-	if ($v =~ /^\s/) {
-	    print F $v;
-	} else {
-	    print F "\t\t$v";
-	    print F " $1" if $v =~ /(.*?)\./;
-	}
-	print F "\n";
-    }
-}
-
-# The interface/gateway needs to be configured before this will work!
-sub guessHostname {
-    my ($prefix, $netc, $intf) = @_;
-
-    $intf->{isUp} && dnsServers($netc) or return 0;
-    $netc->{HOSTNAME} && $netc->{DOMAINNAME} and return 1;
-
-    write_resolv_conf("$prefix/etc/resolv.conf", $netc);
-
-    my $name = gethostbyaddr(Socket::inet_aton($intf->{IPADDR}), AF_INET) or log::l("reverse name lookup failed"), return 0;
-
-    log::l("reverse name lookup worked");
-
-    add2hash($netc, { HOSTNAME => $name });
-    1;
-}
-
-sub addDefaultRoute {
-    my ($netc) = @_;
-    c::addDefaultRoute($netc->{GATEWAY}) if $netc->{GATEWAY};
-}
-
-sub sethostname {
-    my ($netc) = @_;
-    syscall_('sethostname', $netc->{HOSTNAME}, length $netc->{HOSTNAME}) or log::l("sethostname failed: $!");
-}
-
-sub resolv($) {
-    my ($name) = @_;
-    is_ip($name) and return $name;
-    my $a = join(".", unpack "C4", (gethostbyname $name)[4]);
-    #-log::l("resolved $name in $a");
-    $a;
-}
-
-sub dnsServers {
-    my ($netc) = @_;
-    my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
-    sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
-}
-
-sub findIntf {
-    my ($intf, $device) = @_;
-    $intf->{$device}->{DEVICE} = $device;
-    $intf->{$device};
-}
-#PAD \s* a la fin
-my $ip_regexp = qr/^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/;
-sub is_ip {
-    my ($ip) = @_;
-    return 0 unless $ip =~ $ip_regexp;
-    my @fields = ($1, $2, $3, $4);
-    foreach (@fields) {
-	return 0 if $_ < 0 || $_ > 255;
-    }
-    return 1;
-}
-
-sub netmask {
-    my ($ip) = @_;
-    return "255.255.255.0" unless is_ip($ip);
-    $ip =~ $ip_regexp;
-    if ($1 >= 1 && $1 < 127) {
-	return "255.0.0.0";    #-1.0.0.0 to 127.0.0.0
-    } elsif ($1  >= 128 && $1 <= 191 ){
-	return "255.255.0.0";  #-128.0.0.0 to 191.255.0.0
-    } elsif ($1 >= 192 && $1 <= 223) {
-	return "255.255.255.0";
-    } else {
-	return "255.255.255.255"; #-experimental classes
-    }
-}
-
-sub masked_ip {
-    my ($ip) = @_;
-    return "" unless is_ip($ip);
-    my @mask = netmask($ip) =~ $ip_regexp;
-    my @ip   = $ip          =~ $ip_regexp;
-    for (my $i = 0; $i < @ip; $i++) {
-	$ip[$i] &= int $mask[$i];
-    }
-    join(".", @ip);
-}
-
-sub dns {
-    my ($ip) = @_;
-    my $mask = masked_ip($ip);
-    my @masked = masked_ip($ip) =~ $ip_regexp;
-    $masked[3]  = 2;
-    join (".", @masked);
-
-}
-sub gateway {
-    my ($ip) = @_;
-    my @masked = masked_ip($ip) =~ $ip_regexp;
-    $masked[3]  = 1;
-    join (".", @masked);
-
-}
-
-sub configureNetworkIntf {
-    my ($netc, $in, $intf, $net_device, $skip, $module) = @_;
-    my $text;
-    my @wireless_modules = qw(aironet_cs aironet4500_cs hermes airo orinico_cs orinico airo_cs netwave_cs ray_cs wavelan_cs wvlan_cs airport);
-    my $flag = 0;
-    foreach (@wireless_modules) {
-	$module =~ /$_/ and $flag =1;
-    }
-    if ($flag) {
-	$intf->{wireless_eth} = 1;
-	$netc->{wireless_eth} = 1;
-	$intf->{WIRELESS_MODE} = "Managed";
-	$intf->{WIRELESS_ESSID} = "any";
-#-	$intf->{WIRELESS_NWID} = "";
-#-	$intf->{WIRELESS_FREQ} = "";
-#-	$intf->{WIRELESS_SENS} = "";
-#-	$intf->{WIRELESS_RATE} = "";
-#-	$intf->{WIRELESS_ENC_KEY} = "";
-#-	$intf->{WIRELESS_RTS} = "";
-#-	$intf->{WIRELESS_FRAG} = "";
-#-	$intf->{WIRELESS_IWCONFIG} = "";
-#-	$intf->{WIRELESS_IWSPY} = "";
-#-	$intf->{WIRELESS_IWPRIV} = "";
-    }
-    if ($net_device eq $intf->{DEVICE}) {
-	$skip and return 1;
-	$text = _("WARNING: this device has been previously configured to connect to the Internet.
-Simply accept to keep this device configured.
-Modifying the fields below will override this configuration.");
-    }
-    else {
-	$text = _("Please enter the IP configuration for this machine.
-Each item should be entered as an IP address in dotted-decimal
-notation (for example, 1.2.3.4).");
-    }
-    my $pump = $intf->{BOOTPROTO} =~ /^(dhcp|bootp)$/;
-    delete $intf->{NETWORK};
-    delete $intf->{BROADCAST};
-    my $onboot = 1;
-    my @fields = qw(IPADDR NETMASK);
-    $::isStandalone or $in->set_help('configureNetworkIP');
-    $in->ask_from(_("Configuring network device %s", $intf->{DEVICE}),
-  	          (_("Configuring network device %s", $intf->{DEVICE}) . ( $module ? _(" (driver %s)", $module) : '' ) ."\n\n") .
-	          $text,
-	         [ { label => _("IP address"), val => \$intf->{IPADDR}, disabled => sub { $pump } },
-	           { label => _("Netmask"),     val => \$intf->{NETMASK}, disabled => sub { $pump } },
-	           { label => _("Automatic IP"), val => \$pump, type => "bool", text => _("(bootp/dhcp)") },
-	           if_($::expert, { label => _("Start at boot"), val => \$onboot, type => "bool" }),
-		   if_($intf->{wireless_eth},
-	           { label => "WIRELESS_MODE", val => \$intf->{WIRELESS_MODE}, list => [ "Ad-hoc", "Managed", "Master", "Repeater", "Secondary", "Auto"] },
-	           { label => "WIRELESS_ESSID", val => \$intf->{WIRELESS_ESSID} },
-	           { label => "WIRELESS_NWID", val => \$intf->{WIRELESS_NWID} },
-	           { label => "WIRELESS_FREQ", val => \$intf->{WIRELESS_FREQ} },
-	           { label => "WIRELESS_SENS", val => \$intf->{WIRELESS_SENS} },
-	           { label => "WIRELESS_RATE", val => \$intf->{WIRELESS_RATE} },
-	           { label => "WIRELESS_ENC_KEY", val => \$intf->{WIRELESS_ENC_KEY} },
-	           { label => "WIRELESS_RTS", val => \$intf->{WIRELESS_RTS} },
-	           { label => "WIRELESS_FRAG", val => \$intf->{WIRELESS_FRAG} },
-	           { label => "WIRELESS_IWCONFIG", val => \$intf->{WIRELESS_IWCONFIG} },
-	           { label => "WIRELESS_IWSPY", val => \$intf->{WIRELESS_IWSPY} },
-	           { label => "WIRELESS_IWPRIV", val => \$intf->{WIRELESS_IWPRIV} }
-	           ),
-	         ],
-	         complete => sub {
-	         	 $intf->{BOOTPROTO} = $pump ? "dhcp" : "static";
-	         	 return 0 if $pump;
-	         	 for (my $i = 0; $i < @fields; $i++) {
-	         	     unless (is_ip($intf->{$fields[$i]})) {
-	         		 $in->ask_warn('', _("IP address should be in format 1.2.3.4"));
-	         		 return (1,$i);
-	         	     }
-	         	     return 0;
-	         	 }
-	         	 if ($intf->{WIRELESS_FREQ} !~ /[0-9.]*[kGM]/) {
-	         	     $in->ask_warn('', _('Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough \'0\'.'));
-	         	     return (1,6);
-	         	 }
-	         	 if ($intf->{WIRELESS_RATE} !~ /[0-9.]*[kGM]/) {
-	         	     $in->ask_warn('', _('Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough \'0\'.'));
-	         	     return (1,8);
-	         	 }
-	         },
-	         focus_out => sub {
-	         	 $intf->{NETMASK} ||= netmask($intf->{IPADDR}) unless $_[0]
-	         }
-    	    );
-    $intf->{ONBOOT} = bool2yesno($onboot);
-}
-
-sub configureNetworkNet {
-    my ($in, $netc, $intf, @devices) = @_;
-
-    $netc->{dnsServer} ||= dns($intf->{IPADDR});
-    my $gateway_ex = gateway($intf->{IPADDR});
-#-    $netc->{GATEWAY}   ||= gateway($intf->{IPADDR});
-
-    $::isInstall and $in->set_help('configureNetworkHost');
-    $in->ask_from(_("Configuring network"),
-_("Please enter your host name.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''.
-You may also enter the IP address of the gateway if you have one"),
-			       [ { label => _("Host name"), val => \$netc->{HOSTNAME} },
-				 { label => _("DNS server"), val => \$netc->{dnsServer} },
-				 { label => _("Gateway (e.g. %s)", $gateway_ex), val => \$netc->{GATEWAY} },
-				    if_(@devices > 1,
-				 { label => _("Gateway device"), val => \$netc->{GATEWAYDEV}, list => \@devices },
-				    ),
-			       ],
-			      );
-}
-
-sub miscellaneousNetwork {
-    my ($in, $clicked, $no_track_net) = @_;
-    my $u = $::o->{miscellaneous} ||= {};
-    $::isInstall and $in->set_help('configureNetworkProxy');
-    $u->{track_network_id} = detect_devices::isLaptop();
-    $::expert || $clicked and $in->ask_from('',
-       _("Proxies configuration"),
-       [ { label => _("HTTP proxy"), val => \$u->{http_proxy} },
-         { label => _("FTP proxy"),  val => \$u->{ftp_proxy} },
-	 if_(!$no_track_net, { label => _("Track network card id (useful for laptops)"), val => \$u->{track_network_id}, type => "bool" }),
-       ],
-       complete => sub {
-	   $u->{http_proxy} =~ m,^($|http://), or $in->ask_warn('', _("Proxy should be http://...")), return 1,0;
-	   $u->{ftp_proxy} =~ m,^($|ftp://), or $in->ask_warn('', _("Proxy should be ftp://...")), return 1,1;
-	   0;
-       }
-    ) || return;
-}
-
-sub read_all_conf {
-    my ($prefix, $netc, $intf) = @_;
-    $netc ||= {}; $intf ||= {};
-    add2hash($netc, read_conf("$prefix/etc/sysconfig/network")) if -r "$prefix/etc/sysconfig/network";
-    add2hash($netc, read_resolv_conf("$prefix/etc/resolv.conf")) if -r "$prefix/etc/resolv.conf";
-    foreach (all("$prefix/etc/sysconfig/network-scripts")) {
-	if (/ifcfg-(\w+)/ && $1 ne 'lo' && $1 !~ /ppp/) {
-	    my $intf = findIntf($intf, $1);
-	    add2hash($intf, { getVarsFromSh("$prefix/etc/sysconfig/network-scripts/$_") });
-	}
-    }
-}
-
-#- configureNetwork2 : configure the network interfaces.
-#- input
-#-  $prefix
-#-  $netc
-#-  $intf
-#- $netc input
-#-  NETWORKING : networking flag : string : "yes" by default
-#-  FORWARD_IPV4 : forward IP flag : string : "false" by default
-#-  HOSTNAME : hostname : string : "localhost.localdomain" by default
-#-  DOMAINNAME : domainname : string : $netc->{HOSTNAME} =~ /\.(.*)/ by default
-#-  DOMAINNAME2 : well it's another domainname : have to look further why we used 2
-#-  The following are facultatives
-#-  DHCP_HOSTNAME : If you have a dhcp and want to set the hostname
-#-  GATEWAY : gateway
-#-  GATEWAYDEV : gateway interface
-#-  NISDOMAIN : nis domain
-#-  $netc->{dnsServer} : dns server 1
-#-  $netc->{dnsServer2} : dns server 2
-#-  $netc->{dnsServer3} : dns server 3 : note that we uses the dns1 for the LAN, and the 2 others for the internet conx
-#- $intf input: for each $device (for example ethx)
-#-  $intf->{$device}{IPADDR} : IP address
-#-  $intf->{$device}{NETMASK} : netmask
-#-  $intf->{$device}{DEVICE} : DEVICE = $device
-#-  $intf->{$device}{BOOTPROTO} : boot prototype : "bootp" or "dhcp" or "pump" or ...
-sub configureNetwork2 {
-    my ($in, $prefix, $netc, $intf) = @_;
-    my $etc = "$prefix/etc";
-
-    $netc->{wireless_eth} and $in->do_pkgs->install(qw(wireless-tools));
-    write_conf("$etc/sysconfig/network", $netc);
-    write_resolv_conf("$etc/resolv.conf", $netc);
-    write_interface_conf("$etc/sysconfig/network-scripts/ifcfg-$_->{DEVICE}", $_, $prefix) foreach grep { $_->{DEVICE} } values %$intf;
-    add2hosts("$etc/hosts", $netc->{HOSTNAME}, map { $_->{IPADDR} } values %$intf);
-
-    if (grep { $_->{BOOTPROTO} =~ /^(dhcp)$/ } values %$intf) {
-	$in->do_pkgs->install($netc->{dhcp_client} ? $netc->{dhcp_client} : 'dhcpcd');
-    }
-    if (grep { $_->{BOOTPROTO} =~ /^(pump|bootp)$/ } values %$intf) {
-	$in->do_pkgs->install('pump');
-    }
-    #-res_init();		#- reinit the resolver so DNS changes take affect
-
-    any::miscellaneousNetwork($prefix);
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/network/nfs.pm b/perl-install/network/nfs.pm
deleted file mode 100644
index 58b2dab28..000000000
--- a/perl-install/network/nfs.pm
+++ /dev/null
@@ -1,66 +0,0 @@
-package network::nfs; # $Id$
-
-use strict;
-use diagnostics;
-
-use common;
-use network::network;
-use network::smbnfs;
-use log;
-
-our @ISA = 'network::smbnfs';
-
-sub to_fstab_entry {
-    my ($class, $e) = @_;
-    $class->to_fstab_entry_raw($e, 'nfs');
-}
-sub comment_to_string {
-    my ($class, $comment) = @_;
-    member($comment, qw(* 0.0.0.0/0.0.0.0 (everyone))) ? '' : $comment;
-}
-sub from_dev { 
-    my ($class, $dev) = @_;
-    $dev =~ m|(.*?):(.*)|;
-}
-sub to_dev_raw {
-    my ($class, $server, $name) = @_;
-    $server . ':' . $name;
-}
-
-sub check {
-    my ($class, $in) = @_;
-    $class->raw_check($in, 'nfs-utils-clients', '/usr/sbin/showmount');
-}
-
-sub find_servers {
-    local *F;
-    my $pid = open F, "rpcinfo-flushed -b mountd 2 |";
-    $SIG{ALRM} = sub { kill(15, $pid) };
-    alarm 1;
-
-    my $domain = chomp_(`domainname`);
-    my @servers;
-    while (<F>) {
-	chomp;
-	my ($ip, $name) = /(\S+)\s+(\S+)/ or log::l("bad line in rpcinfo output"), next;
-	$name =~ s/\Q.$domain//; 
-	$name =~ s/\.$//;
-	push @servers, { ip => $ip, if_($name ne '(unknown)', name => $name) };
-    }
-    @servers;
-}
-
-sub find_exports {
-    my ($class, $server) = @_;
-
-    local *F;
-    my $s = $server->{ip} || $server->{name};
-    my $pid = open F, "showmount -e $s |";
-    $SIG{ALRM} = sub { kill(15, $pid) };
-    alarm 5;
-
-    my (undef, @l) = <F>;
-    map { /(\S+)\s*(\S+)/; { name => $1, comment => $2, server => $server } } @l;
-}
-
-1;
diff --git a/perl-install/network/smb.pm b/perl-install/network/smb.pm
deleted file mode 100644
index d212f5122..000000000
--- a/perl-install/network/smb.pm
+++ /dev/null
@@ -1,150 +0,0 @@
-package network::smb; # $Id$
-
-use strict;
-use diagnostics;
-
-use common;
-use fs;
-use network::network;
-use network::smbnfs;
-
-
-our @ISA = 'network::smbnfs';
-
-sub to_fstab_entry {
-    my ($class, $e) = @_;
-    my $part = $class->to_fstab_entry_raw($e, 'smbfs');
-    if ($e->{server}{username}) {
-	my ($options, $unknown) = fs::mount_options_unpack($part);
-	$options->{"$_="} = $e->{server}{$_} foreach qw(username password domain);
-	fs::mount_options_pack($part, $options, $unknown);
-    }
-    $part;
-}
-sub from_dev { 
-    my ($class, $dev) = @_;
-    $dev =~ m|//(.*?)/(.*)|;
-}
-sub to_dev_raw {
-    my ($class, $server, $name) = @_;
-    '//' . $server . '/' . $name;
-}
-
-sub check {
-    my ($class, $in) = @_;
-    $class->raw_check($in, 'samba-client', '/usr/bin/nmblookup');
-}
-
-sub smbclient {
-    my ($server) = @_;
-    my $name  = $server->{name} || $server->{ip};
-    my $ip    = $server->{ip} ? "-I $server->{ip}" : '';
-    my $group = $server->{group} ? " -W $server->{group}" : '';
-
-    my $U = $server->{username} ? "$server->{domain}/$server->{username}%$server->{password}" : '%';
-    `smbclient -U $U -L $name $ip$group`;
-}
-
-sub find_servers {
-    my (undef, @l) = `nmblookup "*"`;
-    s/\s.*\n// foreach @l;
-    my @servers = grep { network::network::is_ip($_) } @l;
-    my %servers;
-    $servers{$_}{ip} = $_ foreach @servers;
-    my ($ip, $browse);
-    foreach (`nmblookup -A @servers`) {
-	my $nb = /^Looking up status of (\S+)/ .. /^$/ or next;
-	if ($nb == 1) {
-	    $ip = $1;
-	} elsif (/<00>/) {
-	    $servers{$ip}{/<GROUP>/ ? 'group' : 'name'} ||= lc first(/(\S+)/);
-	} elsif (/__MSBROWSE__/) {
-	    $browse ||= $servers{$ip};
-	}
-    }
-    if ($browse) {
-	my %l;
-	foreach (smbclient($browse)) {
-	    my $nb = /^\s*Workgroup/ .. /^$/;
-	    $nb > 2 or next;
-	    my ($group, $name) = split(' ', lc($_));
-
-	    # already done
-	    next if grep { $group eq $_->{group} } values %servers;
-
-	    $l{$name} = $group;
-	}
-	if (my @l = keys %l) {
-	    foreach (`nmblookup @l`) {
-		$servers{$1} = { name => $2, group => $l{$2} } if /(\S+)\s+([^<]+)<00>/;
-	    }
-	}
-    }
-    values %servers;
-}
-
-sub find_exports {
-    my ($class, $server) = @_;
-    my @l;
-
-    foreach (smbclient($server)) {
-	chomp;
-	s/^\t//;
-	/NT_STATUS_/ and die $_;
-	my ($name, $type, $comment) = unpack "A15 A10 A*", $_;
-	if ($name eq '---------' && $type eq '----' && $comment eq '-------' .. /^$/) {
-	    push @l, { name => $name, type => $type, comment => $comment, server => $server }
-	      if $type eq 'Disk' && $name !~ /\$$/ && $name !~ /NETLOGON|SYSVOL/;
-	}
-    }
-    @l;
-}
-
-sub authentifications_available {
-    my ($server) = @_;
-    map { if_(/^auth.\Q$server->{name}.\E(.*)/, $1) } all("/etc/samba");
-}
-
-sub to_credentials {
-    my ($server_name, $username) = @_;
-    $username or die 'to_credentials';
-    "/etc/samba/auth.$server_name.$username";
-}
-
-sub fstab_entry_to_credentials {
-    my ($part) = @_;    
-
-    my ($server_name) = network::smb->from_dev($part->{device}) or return;
-
-    my ($options, $unknown) = fs::mount_options_unpack($part);
-    $options->{'username='} && $options->{'password='} or return;
-    my %h = map { $_ => delete $options->{"$_="} } qw(username domain password);
-    $h{file} = $options->{'credentials='} = to_credentials($server_name, $h{username});
-    fs::mount_options_pack_($part, $options, $unknown), \%h;
-}
-
-sub remove_bad_credentials {
-    my ($server) = @_;
-    unlink to_credentials($server->{name}, $server->{username});
-}
-
-sub save_credentials {
-    my ($credentials) = @_;
-    my $file = $credentials->{file};
-    output($file, map { "$_ = $credentials->{$_}\n" } qw(username domain password));
-    chmod(0640, $file);
-}
-
-
-sub read_credentials_raw {
-    my ($file) = @_;
-    my %h = map { /(.*?)\s*=\s*(.*)/ } cat_($file);
-    \%h;
-}
-
-sub read_credentials {
-    my ($server, $username) = @_;
-    put_in_hash($server, read_credentials_raw(to_credentials($server->{name}, $username)));
-}
-
-1;
diff --git a/perl-install/network/smbnfs.pm b/perl-install/network/smbnfs.pm
deleted file mode 100644
index 6b55f6fd0..000000000
--- a/perl-install/network/smbnfs.pm
+++ /dev/null
@@ -1,58 +0,0 @@
-package network::smbnfs; # $Id$
-
-use strict;
-use diagnostics;
-
-use fs;
-
-
-sub new { 
-    my ($class, $v) = @_;
-    bless($v || {}, $class);
-}
-
-sub server_to_string {
-    my ($class, $server) = @_;
-    $server->{name} || $server->{ip};
-}
-sub comment_to_string {
-    my ($class, $comment) = @_;
-    $comment;
-}
-sub to_dev {
-    my ($class, $e) = @_;
-    $class->to_dev_raw($class->server_to_string($e->{server}), $e->{name} || $e->{ip});
-}
-sub to_string {
-    my ($class, $e) = @_;
-    my $comment = $class->comment_to_string($e->{comment});
-    ($e->{name} || $e->{ip}) . ($comment ? " ($comment)" : '');
-}
-
-sub to_fullstring {
-    my ($class, $e) = @_;
-    my $comment = $class->comment_to_string($e->{comment});
-    $class->to_dev($e) . ($comment ? " ($comment)" : '');
-}
-sub to_fstab_entry_raw {
-    my ($class, $e, $type) = @_;
-    my $fs_entry = { device => $class->to_dev($e), type => $type };
-    fs::set_default_options($fs_entry);
-    $fs_entry;
-}
-
-sub raw_check {
-    my ($class, $in, $pkg, $file) = @_;
-    if (! -e $file) {
-	$in->ask_okcancel('', _("The package %s needs to be installed. Do you want to install it?", $pkg), 1) or return;
-	$in->do_pkgs->install($pkg);
-    }
-    if (! -e $file) {
-	$in->ask_warn('', _("Mandatory package %s is missing", $pkg));
-	return;
-    }
-    1;
-}
-
-1;
-
diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm
deleted file mode 100644
index ccc492395..000000000
--- a/perl-install/network/tools.pm
+++ /dev/null
@@ -1,227 +0,0 @@
-package network::tools;
-
-use common;
-use run_program;
-use c;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix $disconnect_file $connect_prog $connect_file);
-use MDK::Common::System qw(getVarsFromSh);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(write_cnx_script write_secret_backend write_initscript ask_connect_now connect_backend disconnect_backend read_providers_backend ask_info2 type2interface connected connected_bg connected2 disconnected);
-@EXPORT_OK = qw($in);
-
-sub write_cnx_script {
-    my ($netc, $type, $up, $down, $type2) = @_;
-    if ($type) {
-	$netc->{internet_cnx}{$type}{$_->[0]}=$_->[1] foreach ([$connect_file, $up], [$disconnect_file, $down]);
-	$netc->{internet_cnx}{$type}{type} = $type2;
-    } else {
-	foreach ($connect_file, $disconnect_file) {
-	    output ("$prefix$_",
-'#!/bin/bash
-' . if_(!$netc->{at_boot}, 'if [ "x$1" == "x--boot_time" ]; then exit; fi
-') . $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{$_});
-	chmod 0755, "$prefix" . $_;
-	}
-    }
-}
-
-sub write_secret_backend {
-    my ($a, $b) = @_;
-    foreach my $i ("pap-secrets", "chap-secrets") {
-	substInFile { s/^'$a'.*\n//; $_ .= "\n'$a' * '$b' * \n" if eof  } "$prefix/etc/ppp/$i";
-    }
-}
-
-sub ask_connect_now {
-    my ($type) = @_;
-    $::Wizard_no_previous=1;
-    #- FIXME : code the exception to be generated by ask_yesorno, to be able to remove the $::Wizard_no_previous=1;
-    if ($in->ask_yesorno(_("Internet configuration"),
-			 _("Do you want to try to connect to the Internet now?")
-			)) {
-	my $up;
-	{
-	    my $w = $in->wait_message('', _("Testing your connection..."), 1);
-	    connect_backend();
-	    my $s = 30;
-	    $type =~ /modem/ and $s=50;
-	    $type =~ /adsl/ and $s=35;
-	    $type =~ /isdn/ and $s=20;
-	    sleep $s;
-	    my $netc = {};
-	    $up=connected();
-	}
-	my $m = $up ? (_("The system is now connected to Internet.") .
-		     if_($::isInstall, _("For security reason, it will be disconnected now.")) ) :
-		       _("The system doesn't seem to be connected to internet.
-Try to reconfigure your connection.");
-	if ($::isWizard) {
-	    $::Wizard_no_previous=1;
-	    $::Wizard_finished=1;
-	    $in->ask_okcancel(_("Network Configuration"), $m, 1);
-	    undef $::Wizard_no_previous;
-	    undef $::Wizard_finished;
-	} else {  $in->ask_warn('', $m ); }
-	$::isInstall and disconnect_backend();
-    }
-    undef $::Wizard_no_previous;
-    $up;
-}
-
-sub connect_backend { run_program::rooted($prefix, "$connect_prog &") }
-
-sub disconnect_backend { run_program::rooted($prefix, "$disconnect_file &") }
-
-sub read_providers_backend { my ($file) = @_; map { /(.*?)=>/ } catMaybeCompressed($file) }
-
-sub ask_info2 {
-    my ($cnx, $netc) = @_;
-    $::isInstall and $in->set_help('configureNetworkDNS');
-    $in->ask_from(_("Connection Configuration"),
-		  _("Please fill or check the field below"),
-		  [
-		   if__($cnx->{irq}, { label => _("Card IRQ"), val => \$cnx->{irq} })  ,
-		   if__($cnx->{mem}, { label => _("Card mem (DMA)"), val => \$cnx->{mem} }),
-		   if__($cnx->{io}, { label => _("Card IO"), val => \$cnx->{io} }),
-		   if__($cnx->{io0}, { label => _("Card IO_0"), val => \$cnx->{io0} }),
-		   if__($cnx->{io1}, { label => _("Card IO_1"), val => \$cnx->{io1} }),
-		   if__($cnx->{phone_in}, { label => _("Your personal phone number"), val => \$cnx->{phone_in} }),
-		   if__($netc->{DOMAINNAME2}, { label => _("Provider name (ex provider.net)"), val => \$netc->{DOMAINNAME2} }),
-		   if__($cnx->{phone_out}, { label => _("Provider phone number"), val => \$cnx->{phone_out} }),
-		   if__($netc->{dnsServer2}, { label => _("Provider dns 1 (optional)"), val => \$netc->{dnsServer2} }),
-		   if__($netc->{dnsServer3}, { label => _("Provider dns 2 (optional)"), val => \$netc->{dnsServer3} }),
-		   if__($cnx->{vpivci}, { label => _("Choose your country"), val => \$netc->{vpivci}, list => detect_timezone() }),
-		   if__($cnx->{dialing_mode}, { label => _("Dialing mode"), val => \$cnx->{dialing_mode},list=>["auto","manual"]}),
-		   if__($cnx->{speed}, { label => _("Connection speed"), val => \$cnx->{speed}, list => ["64 Kb/s", "128 Kb/s"]}),
-		   if__($cnx->{huptimeout}, { label => _("Connection timeout (in sec)"), val => \$cnx->{huptimeout} }),
-		   if__($cnx->{login}, { label => _("Account Login (user name)"), val => \$cnx->{login} }),
-		   if__($cnx->{passwd}, { label => _("Account Password"),  val => \$cnx->{passwd} }),
-		  ]
-		 ) or return;
-    if ($netc->{vpivci}) {
-	foreach (['Netherlands', '8_48'], ['France', '8_35'], ['Belgium', '8_35'], ['Italy', '8_35'], ['UK', '0_38'], ['USA', '8_35']) {
-	    $netc->{vpivci} eq $_->[0] and $netc->{vpivci} = $_->[1];
-	}
-    }
-    1;
-}
-
-sub detect_timezone {
-    my %tmz2country = ( 
-		       'Europe/Paris' => _("France"),
-		       'Europe/Amsterdam' => _("Netherlands"),
-		       'Europe/Rome' => _("Italy"),
-		       'Europe/Brussels' => _("Belgium"), 
-		       'America/New_York' => _("United States"),
-		       'Europe/London' => _("United Kingdom") 
-		      );
-    my %tm_parse = MDK::Common::System::getVarsFromSh('/etc/sysconfig/clock');
-    foreach (keys %tmz2country) {
-	if ($_ eq $tm_parse{ZONE}) {
-	    unshift @country, $tmz2country{$_};
-	} else { push @country, $tmz2country{$_} };
-    }
-    \@country;
-}
-
-sub type2interface {
-    my ($i) = @_;
-    $i=~/$_->[0]/ and return $_->[1] foreach (
-					      [ modem => 'ppp'],
-					      [ isdn_internal => 'ippp'],
-					      [ isdn_external => 'ppp'],
-					      [ adsl => 'ppp'],
-					      [ cable => 'eth'],
-					      [ lan => 'eth']);
-}
-
-sub connected { gethostbyname("mandrakesoft.com") ? 1 : 0 }
-
-my $kid_pipe;
-sub connected_bg {
-    local $|=1;
-    my ($ref) = @_;
-    if (defined $kid_pipe) {
-	local *F;
-	*F = *$kid_pipe;
-	fcntl(F, c::F_SETFL(), c::O_NONBLOCK()) or die "can't fcntl F_SETFL: $!";
-	my $a;
-  	if (defined($a = <F>)) {
-	    close($kid_pipe) || warn "kid exited $?";
-	    undef $kid_pipe;
-	    $$ref = $a;
-  	}
-    } else { $kid_pipe = connected2(); }
-    1;
-}
-
-sub connected2 {
-    my $pid = open(KID_TO_READ, "-|");
-    if ($pid) {   # parent
-	return \*KID_TO_READ;
-    } else {      # child
-	my $a = gethostbyname("mandrakesoft.com") ? 1 : 0;
-	print $a;
-	c::_exit(0);
-    }
-}
-
-sub disconnected { }
-
-
-sub write_initscript {
-    output ("$prefix/etc/rc.d/init.d/internet",
-	    q{
-#!/bin/bash
-#
-# internet       Bring up/down internet connection
-#
-# chkconfig: 2345 11 89
-# description: Activates/Deactivates the internet interfaces
-#
-# dam's (damien@mandrakesoft.com)
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-	case "$1" in
-		start)
-                if [ -e } . $connect_file . q{ ]; then
-			action "Checking internet connections to start at boot" "} . "$connect_file --boot_time" . q{"
-		else
-			action "No connection to start" "true"
-		fi
-		touch /var/lock/subsys/internet
-		;;
-	stop)
-                if [ -e } . $disconnect_file . q{ ]; then
-			action "Stopping internet connection if needed: " "} . "$disconnect_file --boot_time" . q{"
-		else
-			action "No connection to stop" "true"
-		fi
-		rm -f /var/lock/subsys/internet
-		;;
-	restart)
-		$0 stop
-		echo "Waiting 10 sec before restarting the internet connection."
-		sleep 10
-		$0 start
-		;;
-	status)
-		;;
-	*)
-	echo "Usage: internet {start|stop|status|restart}"
-	exit 1
-esac
-exit 0
- });
-    chmod 0755, "$prefix/etc/rc.d/init.d/internet";
-    $::isStandalone ? system("/sbin/chkconfig --add internet") : do {
-	symlinkf ("../init.d/internet", "$prefix/etc/rc.d/rc$_") foreach
-	  '0.d/K11internet', '1.d/K11internet', '2.d/K11internet', '3.d/S89internet', '5.d/S89internet', '6.d/K11internet';
-    };
-}
-
-1;
diff --git a/perl-install/pam.net_monitor b/perl-install/pam.net_monitor
deleted file mode 100644
index bc9a8d611..000000000
--- a/perl-install/pam.net_monitor
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-auth       sufficient   /lib/security/pam_rootok.so
-auth       required /lib/security/pam_stack.so service=system-auth
-account    required /lib/security/pam_permit.so
-session    optional /lib/security/pam_xauth.so
-
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
deleted file mode 100644
index 2feb0faf3..000000000
--- a/perl-install/partition_table.pm
+++ /dev/null
@@ -1,794 +0,0 @@
-package partition_table; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK @important_types @important_types2 @fields2save @bad_types);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
-    types => [ qw(type2name type2fs name2type fs2type isExtended isExt2 isThisFs isTrueFS isSwap isDos isWin isFat isSunOS isOtherAvailableFS isPrimary isRawLVM isRawRAID isRAID isLVM isNT isMountableRW isNonMountable isPartOfLVM isPartOfRAID isPartOfLoopback isApplePartMap isLoopback isMounted isBusy isSpecial maybeFormatted isApple isAppleBootstrap) ],
-);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-
-use common;
-use partition_table_raw;
-use detect_devices;
-use log;
-
-@important_types = ('Linux native', 'Linux swap', 
-		    if_(arch() =~ /i.86/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'DOS FAT16', 'FAT32'),
-			if_(arch() =~ /ia64/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: XFS', 'FAT32'),
-		    if_(arch() =~ /ppc/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'Apple HFS Partition', 'Apple Bootstrap'));
-@important_types2 = ('Linux RAID', 'Linux Logical Volume Manager partition');
-
-@fields2save = qw(primary extended totalsectors isDirty needKernelReread);
-
-@bad_types = ('Empty', 'DOS 3.3+ Extended Partition', 'Win95: Extended partition, LBA-mapped', 'Linux extended partition');
-
-my %types = (
-  0x0 => 'Empty',
-if_(arch() =~ /^ppc/, 
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x383 => 'Journalised FS: JFS',
-  0x483 => 'Journalised FS: ext3',
-  0x401	=> 'Apple Partition',
-  0x401	=> 'Apple Bootstrap',
-  0x402	=> 'Apple HFS Partition',
-), if_(arch() =~ /^i.86/,
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x383 => 'Journalised FS: JFS',
-  0x483 => 'Journalised FS: ext3',
-), if_(arch() =~ /^ia64/,
-  0x100 => 'Various',
-  0x183 => 'Journalised FS: ReiserFS',
-  0x283 => 'Journalised FS: XFS',
-  0x483 => 'Journalised FS: ext3',
-), if_(arch() =~ /^sparc/,
-  0x1 => 'SunOS boot',
-  0x2 => 'SunOS root',
-  0x3 => 'SunOS swap',
-  0x4 => 'SunOS usr',
-  0x5 => 'Whole disk',
-  0x6 => 'SunOS stand',
-  0x7 => 'SunOS var',
-  0x8 => 'SunOS home',
-), if_(arch() =~ /^i.86/,
-  0x1 => 'DOS 12-bit FAT',
-  0x2 => 'XENIX root',
-  0x3 => 'XENIX /usr',
-  0x4 => 'DOS 16-bit FAT (up to 32M)',
-  0x5 => 'DOS 3.3+ Extended Partition',
-  0x6 => 'DOS FAT16',
-  0x7 => 'NTFS (or HPFS)',
-  0x8 => 'OS/2 (v1.0-1.3 only) / AIX boot partition / SplitDrive / Commodore DOS / DELL partition spanning multiple drives / QNX 1.x and 2.x ("qny")',
-),
-  0x9 => 'AIX data partition / Coherent filesystem / QNX 1.x and 2.x ("qnz")',
-  0xa => 'OS/2 Boot Manager / Coherent swap partition / OPUS',
-  0xb => 'FAT32',
-  0xc => 'Win98 FAT32, LBA-mapped',
-  0xe => 'Win95: DOS 16-bit FAT, LBA-mapped',
-  0xf => 'Win95: Extended partition, LBA-mapped',
-  0x10 => 'OPUS (?)',
-  0x11 => 'Hidden DOS 12-bit FAT',
-  0x12 => 'Compaq/HP config partition',
-  0x14 => 'Hidden DOS 16-bit FAT <32M',
-  0x16 => 'Hidden DOS 16-bit FAT >=32M',
-  0x17 => 'Hidden IFS (e.g., HPFS)',
-  0x18 => 'AST Windows swapfile',
-  0x1b => 'Hidden WIN95 OSR2 32-bit FAT',
-  0x1c => 'Hidden WIN95 OSR2 32-bit FAT, LBA-mapped',
-  0x1e => 'Hidden FAT95',
-  0x22 => 'Used for Oxygen Extended Partition Table by ekstazya@sprint.ca.',
-  0x24 => 'NEC DOS 3.x',
-  0x38 => 'THEOS ver 3.2 2gb partition',
-  0x39 => 'THEOS ver 4 spanned partition',
-  0x3a => 'THEOS ver 4 4gb partition',
-  0x3b => 'THEOS ver 4 extended partition',
-  0x3c => 'PartitionMagic recovery partition',
-  0x40 => 'Venix 80286',
-  0x41 => 'Linux/MINIX (sharing disk with DRDOS) / Personal RISC Boot / PPC PReP (Power PC Reference Platform) Boot',
-  0x42 => 'Windows Dynamic Partition',
-  0x43 => 'Linux native (sharing disk with DRDOS)',
-  0x45 => 'EUMEL/Elan',
-  0x46 => 'EUMEL/Elan 0x46',
-  0x47 => 'EUMEL/Elan 0x47',
-  0x48 => 'EUMEL/Elan 0x48',
-  0x4d => 'QNX4.x',
-  0x4e => 'QNX4.x 2nd part',
-  0x4f => 'QNX4.x 3rd part / Oberon partition',
-  0x50 => 'OnTrack Disk Manager (older versions) RO',
-  0x51 => 'OnTrack Disk Manager RW (DM6 Aux1) / Novell',
-  0x52 => 'CP/M / Microport SysV/AT',
-  0x53 => 'Disk Manager 6.0 Aux3',
-  0x54 => 'Disk Manager 6.0 Dynamic Drive Overlay',
-  0x55 => 'EZ-Drive',
-  0x56 => 'Golden Bow VFeature Partitioned Volume. / DM converted to EZ-BIOS',
-  0x57 => 'DrivePro',
-  0x5c => 'Priam EDisk',
-  0x61 => 'SpeedStor',
-  0x63 => 'Unix System V (SCO, ISC Unix, UnixWare, ...), Mach, GNU Hurd',
-  0x64 => 'PC-ARMOUR protected partition / Novell Netware 2.xx',
-  0x65 => 'Novell Netware 3.xx or 4.xx',
-  0x67 => 'Novell',
-  0x68 => 'Novell 0x68',
-  0x69 => 'Novell 0x69',
-  0x70 => 'DiskSecure Multi-Boot',
-  0x75 => 'IBM PC/IX',
-  0x80 => 'MINIX until 1.4a',
-  0x81 => 'MINIX since 1.4b, early Linux / Mitac disk manager',
-  0x82 => 'Linux swap',
-  0x83 => 'Linux native',
-  0x84 => 'OS/2 hidden C: drive / Hibernation partition',
-  0x85 => 'Linux extended partition',
-  0x86 => 'Old Linux RAID partition superblock / NTFS volume set',
-  0x87 => 'NTFS volume set',
-  0x8a => 'Linux Kernel Partition (used by AiR-BOOT)',
-  0x8e => 'Linux Logical Volume Manager partition',
-  0x93 => 'Amoeba',
-  0x94 => 'Amoeba bad block table',
-  0x99 => 'DCE376 logical drive',
-  0xa0 => 'IBM Thinkpad hibernation partition / Phoenix NoteBIOS Power Management "Save-to-Disk" partition',
-  0xa5 => 'BSD/386, 386BSD, NetBSD, FreeBSD',
-  0xa6 => 'OpenBSD',
-  0xa7 => 'NEXTSTEP',
-  0xa9 => 'NetBSD',
-  0xaa => 'Olivetti Fat 12 1.44Mb Service Partition',
-  0xb7 => 'BSDI filesystem',
-  0xb8 => 'BSDI swap partition',
-  0xbe => 'Solaris boot partition',
-  0xc0 => 'CTOS / REAL/32 secure small partition',
-  0xc1 => 'DRDOS/secured (FAT-12)',
-  0xc4 => 'DRDOS/secured (FAT-16, < 32M)',
-  0xc6 => 'DRDOS/secured (FAT-16, >= 32M) / Windows NT corrupted FAT16 volume/stripe set',
-  0xc7 => 'Windows NT corrupted NTFS volume/stripe set / Syrinx boot',
-  0xcb => 'reserved for DRDOS/secured (FAT32)',
-  0xcc => 'reserved for DRDOS/secured (FAT32, LBA)',
-  0xcd => 'CTOS Memdump?',
-  0xce => 'reserved for DRDOS/secured (FAT16, LBA)',
-  0xd0 => 'REAL/32 secure big partition',
-  0xd1 => 'Old Multiuser DOS secured FAT12',
-  0xd4 => 'Old Multiuser DOS secured FAT16 <32M',
-  0xd5 => 'Old Multiuser DOS secured extended partition',
-  0xd6 => 'Old Multiuser DOS secured FAT16 >=32M',
-  0xd8 => 'CP/M-86',
-  0xdb => 'Digital Research CP/M, Concurrent CP/M, Concurrent DOS / CTOS (Convergent Technologies OS -Unisys) / KDG Telemetry SCPU boot',
-  0xdd => 'Hidden CTOS Memdump?',
-  0xe1 => 'DOS access or SpeedStor 12-bit FAT extended partition',
-  0xe3 => 'DOS R/O or SpeedStor',
-  0xe4 => 'SpeedStor 16-bit FAT extended partition < 1024 cyl.',
-  0xeb => 'BeOS',
-  0xee => 'EFI GPT',
-  0xef => 'EFI (FAT-12/16/32)',
-  0xf1 => 'SpeedStor 0xf1',
-  0xf2 => 'DOS 3.3+ secondary partition',
-  0xf4 => 'SpeedStor large partition / Prologue single-volume partition',
-  0xf5 => 'Prologue multi-volume partition',
-  0xfd => 'Linux RAID',
-  0xfe => 'SpeedStor > 1024 cyl. or LANstep / IBM PS/2 IML (Initial Microcode Load) partition, located at the end of the disk. / Windows NT Disk Administrator hidden partition / Linux Logical Volume Manager partition (old)',
-  0xff => 'Xenix Bad Block Table',
-);
-
-my %type2fs = (
-arch() =~ /^ppc/ ? (
-  0x07 => 'hpfs',
-) : (
-  0x07 => 'ntfs',
-),
-arch() !~ /sparc/ ? (
-  0x01 => 'vfat',
-  0x04 => 'vfat',
-  0x05 => 'ignore',
-  0x06 => 'vfat',
-) : (
-  0x01 => 'ufs',
-  0x02 => 'ufs',
-  0x04 => 'ufs',
-  0x06 => 'ufs',
-  0x07 => 'ufs',
-  0x08 => 'ufs',
-),
-  0x0b => 'vfat',
-  0x0c => 'vfat',
-  0x0e => 'vfat',
-  0x1b => 'vfat',
-  0x1c => 'vfat',
-  0x1e => 'vfat',
-  0x82 => 'swap',
-  0x83 => 'ext2',
-  0x183=> 'reiserfs',
-  0x283=> 'xfs',
-  0x383=> 'jfs',
-  0x483=> 'ext3',
-  0x401 => 'apple',
-  0x402 => 'hfs',
-);
-
-my %types_rev = reverse %types;
-my %fs2type = reverse %type2fs;
-
-
-1;
-
-sub important_types { 
-    my @l = (@important_types, if_($::expert, @important_types2, sort values %types));
-    difference2(\@l, \@bad_types);
-}
-
-sub type2fs { $type2fs{$_[0]{type}} || $_[0]{type} }
-sub fs2type { $fs2type{$_[0]} || $_[0] }
-sub type2name { $types{$_[0]} || $_[0] }
-sub name2type { 
-    local ($_) = @_;
-    /0x(.*)/ ? hex $1 : $types_rev{$_} || $_;
-}
-
-sub isWholedisk { arch() =~ /^sparc/ && $_[0]{type} == 5 }
-sub isExtended { arch() !~ /^sparc/ && ($_[0]{type} == 5 || $_[0]{type} == 0xf || $_[0]{type} == 0x85) }
-sub isRawLVM { $_[0]{type} == 0x8e }
-sub isRawRAID { $_[0]{type} == 0xfd }
-sub isSwap { type2fs($_[0]) eq 'swap' }
-sub isExt2 { type2fs($_[0]) eq 'ext2' }
-sub isDos { arch() !~ /^sparc/ && $ {{ 1=>1, 4=>1, 6=>1 }}{$_[0]{type}} }
-sub isWin { $ {{ 0xb=>1, 0xc=>1, 0xe=>1, 0x1b=>1, 0x1c=>1, 0x1e=>1 }}{$_[0]{type}} }
-sub isFat { isDos($_[0]) || isWin($_[0]) }
-sub isSunOS { arch() =~ /sparc/ && $ {{ 0x1=>1, 0x2=>1, 0x4=>1, 0x6=>1, 0x7=>1, 0x8=>1 }}{$_[0]{type}} }
-sub isNT { arch() !~ /^sparc/ && $_[0]{type} == 0x7 }
-sub isApple { type2fs($_[0]) eq 'apple' && defined $_[0]{isDriver} }
-sub isAppleBootstrap { type2fs($_[0]) eq 'apple' && defined $_[0]{isBoot} }
-sub isHiddenMacPart { defined $_[0]{isMap} }
-
-sub isThisFs { type2fs($_[1]) eq $_[0] }
-sub isTrueFS { member(type2fs($_[0]), qw(ext2 reiserfs xfs jfs ext3)) }
-
-sub isOtherAvailableFS { isFat($_[0]) || isSunOS($_[0]) || isThisFs('hfs', $_[0]) } #- other OS that linux can access its filesystem
-sub isMountableRW { isTrueFS($_[0]) || isOtherAvailableFS($_[0]) }
-sub isNonMountable { isRawRAID($_[0]) || isRawLVM($_[0]) }
-
-sub isPartOfLVM { defined $_[0]{lvm} }
-sub isPartOfRAID { defined $_[0]{raid} }
-sub isPartOfLoopback { defined $_[0]{loopback} }
-sub isRAID { $_[0]{device} =~ /^md/ }
-sub isLVM { $_[0]{LVMname} }
-sub isLoopback { defined $_[0]{loopback_file} }
-sub isMounted { $_[0]{isMounted} }
-sub isBusy { isMounted($_[0]) || isPartOfRAID($_[0]) || isPartOfLVM($_[0]) || isPartOfLoopback($_[0]) }
-sub isSpecial { isRAID($_[0]) || isLVM($_[0]) || isLoopback($_[0]) }
-sub maybeFormatted { $_[0]{isFormatted} || !$_[0]{notFormatted} }
-
-
-#- works for both hard drives and partitions ;p
-sub description {
-    my ($hd) = @_;
-    my $win = $hd->{device_windobe};
-
-    sprintf "%s%s (%s%s%s%s)", 
-      $hd->{device}, 
-      $win && " [$win:]", 
-      formatXiB($hd->{totalsectors} || $hd->{size}, 512),
-      $hd->{info} && ", $hd->{info}",
-      $hd->{mntpoint} && ", " . $hd->{mntpoint},
-      $hd->{type} && ", " . type2name($hd->{type});
-}
-
-sub isPrimary {
-    my ($part, $hd) = @_;
-    foreach (@{$hd->{primary}{raw}}) { $part eq $_ and return 1; }
-    0;
-}
-
-sub adjustStartAndEnd {
-    my ($hd, $part) = @_;
-
-    $hd->adjustStart($part);
-    $hd->adjustEnd($part);
-}
-
-sub verifyNotOverlap {
-    my ($a, $b) = @_;
-    $a->{start} + $a->{size} <= $b->{start} || $b->{start} + $b->{size} <= $a->{start};
-}
-sub verifyInside {
-    my ($a, $b) = @_;
-    $b->{start} <= $a->{start} && $a->{start} + $a->{size} <= $b->{start} + $b->{size};
-}
-
-sub verifyParts_ {
-    foreach my $i (@_) {
-	foreach (@_) {
-	    next if !$i || !$_ || $i == $_ || isWholedisk($i) || isExtended($i); #- avoid testing twice for simplicity :-)
-	    if (isWholedisk($_)) {
-		verifyInside($i, $_) or
-		  cdie sprintf("partition sector #$i->{start} (%s) is not inside whole disk (%s)!",
-			       formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
-	    } elsif (isExtended($_)) {
-		verifyNotOverlap($i, $_) or
-		  log::l(sprintf("warning partition sector #$i->{start} (%s) is overlapping with extended partition!",
-				 formatXiB($i->{size}, 512))); #- only warning for this one is acceptable
-	    } else {
-		verifyNotOverlap($i, $_) or
-		  cdie sprintf("partitions sector #$i->{start} (%s) and sector #$_->{start} (%s) are overlapping!",
-			       formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
-	    }
-	}
-    }
-}
-sub verifyParts {
-    my ($hd) = @_;
-    verifyParts_(get_normal_parts($hd));
-}
-sub verifyPrimary {
-    my ($pt) = @_;
-    $_->{start} > 0 || arch() =~ /^sparc/ || die "partition must NOT start at sector 0" foreach @{$pt->{normal}};
-    verifyParts_(@{$pt->{normal}}, $pt->{extended});
-}
-
-sub assign_device_numbers {
-    my ($hd) = @_;
-
-    my $i = 1;
-    my $start = 1; 
-    
-    #- on PPC we need to assign device numbers to the holes too - big FUN!
-    #- not if it's an IBM machine using a DOS partition table though
-    if (arch() =~ /ppc/ && detect_devices::get_mac_model() !~ /^IBM/) {
-	#- first sort the normal parts
-	$hd->{primary}{normal} = [sort { $a->{start} <=> $b->{start} } @{$hd->{primary}{normal}} ];
-    
-	#- now loop through them, assigning partition numbers - reserve one for the holes
-	foreach (@{$hd->{primary}{normal}}) {
-	    if ($_->{start} > $start) {
-		log::l("PPC: found a hole on $hd->{prefix} before $_->{start}, skipping device..."); 
-		$i++;
-	    }
-	    $_->{device} = $hd->{prefix} . $i++;
-	    $start = $_->{start} + $_->{size};
-	}
-    } else {
-	foreach (@{$hd->{primary}{raw}}) {
-	    my $dev = $hd->{prefix} . $i++;
-	    $_->{device} = $dev;
-	}
-	foreach (map { $_->{normal} } @{$hd->{extended} || []}) {
-	    my $dev = $hd->{prefix} . $i++;
-	    push @{$hd->{partitionsRenumbered}}, [ $_->{device}, $dev ] if $_->{device} && $dev ne $_->{device};
-	    $_->{device} = $dev;
-	}
-    }
-
-    #- try to figure what the windobe drive letter could be!
-    #
-    #- first verify there's at least one primary dos partition, otherwise it
-    #- means it is a secondary disk and all will be false :(
-    my ($c, @others) = grep { isFat($_) } @{$hd->{primary}{normal}};
-
-    $i = ord 'C';
-    $c->{device_windobe} = chr($i++) if $c;
-    $_->{device_windobe} = chr($i++) foreach grep { isFat($_) } map { $_->{normal} } @{$hd->{extended}};
-    $_->{device_windobe} = chr($i++) foreach @others;
-}
-
-sub remove_empty_extended {
-    my ($hd) = @_;
-    my $last = $hd->{primary}{extended} or return;
-    @{$hd->{extended}} = grep {
-	if ($_->{normal}) {
-	    $last = $_;
-	} else {
-	    %{$last->{extended}} = $_->{extended} ? %{$_->{extended}} : ();
-	}
-	$_->{normal};
-    } @{$hd->{extended}};
-    adjust_main_extended($hd);
-}
-
-sub adjust_main_extended {
-    my ($hd) = @_;
-
-    if (!is_empty_array_ref $hd->{extended}) {
-	my ($l, @l) = @{$hd->{extended}};
-
-	# the first is a special case, must recompute its real size
-	my $start = round_down($l->{normal}{start} - 1, $hd->{geom}{sectors});
-	my $end = $l->{normal}{start} + $l->{normal}{size};
-	my $only_linux = 1; my $has_win_lba = 0;
-	foreach (map $_->{normal}, $l, @l) {
-	    $start = min($start, $_->{start});
-	    $end = max($end, $_->{start} + $_->{size});
-	    $only_linux &&= isTrueFS($_) || isSwap($_);
-	    $has_win_lba ||= $_->{type} == 0xc || $_->{type} == 0xe;
-	}
-	$l->{start} = $hd->{primary}{extended}{start} = $start;
-	$l->{size} = $hd->{primary}{extended}{size} = $end - $start;
-    }
-    unless (@{$hd->{extended} || []} || !$hd->{primary}{extended}) {
-	%{$hd->{primary}{extended}} = (); #- modify the raw entry
-	delete $hd->{primary}{extended};
-    }
-    verifyParts($hd); #- verify everything is all right
-}
-
-sub adjust_local_extended {
-    my ($hd, $part) = @_;
-    
-    foreach (@{$hd->{extended} || []}) {
-	$_->{normal} == $part or next;
-	$_->{size} = $part->{size} + $part->{start} - $_->{start};
-	last;
-    }
-}
-
-sub get_normal_parts {
-    my ($hd) = @_;
-
-    @{$hd->{primary}{normal} || []}, map { $_->{normal} } @{$hd->{extended} || []}
-}
-
-sub get_normal_parts_and_holes {
-    my ($hd) = @_;
-    my ($start, $last) = ($hd->first_usable_sector, $hd->last_usable_sector);
-
-    ref($hd) or print("get_normal_parts_and_holes: bad hd" . backtrace(), "\n");
-
-    my @l = map {
-	my $current = $start;
-	$start = $_->{start} + $_->{size};
-	my $hole = { start => $current, size => $_->{start} - $current, type => 0, rootDevice => $hd->{device} };
-	$hole, $_;
-    } sort { $a->{start} <=> $b->{start} } grep { !isWholedisk($_) } get_normal_parts($hd);
-
-    push @l, { start => $start, size => $last - $start, type => 0, rootDevice => $hd->{device} };
-    grep { $_->{type} || $_->{size} >= $hd->cylinder_size } @l;
-}
-
-sub read_one($$) {
-    my ($hd, $sector) = @_;
-    my ($pt, $info);
-
-    #- it can be safely considered that the first sector is used to probe the partition table
-    #- but other sectors (typically for extended partition ones) have to match this type!
-    if (!$sector) {
-	my @parttype = (
-	  if_(arch() =~ /^ia64/, 'gpt'),
-	  arch() =~ /^sparc/ ? ('sun', 'bsd') : ('dos', 'bsd', 'sun', 'mac'),
-	);
-	foreach ('empty', @parttype, 'lvm_PV', 'unknown') {
-	    /unknown/ and die "unknown partition table format on disk " . $hd->{file};
-	    eval {
-		require("partition_table_$_.pm");
-		bless $hd, "partition_table_$_";
-		($pt, $info) = $hd->read($sector);
-		log::l("found a $_ partition table on $hd->{file} at sector $sector");
-	    };
-	    $@ or last;
-	}
-    } else {
-	#- keep current blessed object for that, this means it is neccessary to read sector 0 before.
-	($pt, $info) = $hd->read($sector);
-    }
-
-    my @extended = $hd->hasExtended ? grep { isExtended($_) } @$pt : ();
-    my @normal = grep { $_->{size} && $_->{type} && !isExtended($_) } @$pt;
-
-    @extended > 1 and die "more than one extended partition";
-
-    $_->{rootDevice} = $hd->{device} foreach @normal, @extended;
-    { raw => $pt, extended => $extended[0], normal => \@normal, info => $info };
-}
-
-sub read($;$) {
-    my ($hd, $clearall) = @_;
-    if ($clearall) {
-	partition_table_raw::zero_MBR_and_dirty($hd);
-	return 1;
-    }
-    my $pt = read_one($hd, 0) or return 0;
-    $hd->{primary} = $pt;
-    undef $hd->{extended};
-    verifyPrimary($pt);
-    eval {
-	my $need_removing_empty_extended;
-	$pt->{extended} and read_extended($hd, $pt->{extended}, \$need_removing_empty_extended) || return 0;
-
-	if ($need_removing_empty_extended) {
-	    #- special case when hda5 is empty, it must be skipped
-	    #- (windows XP generates such partition tables)
-	    remove_empty_extended($hd); #- includes adjust_main_extended
-	}
-	
-    }; 
-    die "extended partition: $@" if $@;
-
-    assign_device_numbers($hd);
-    remove_empty_extended($hd);
-    1;
-}
-
-sub read_extended {
-    my ($hd, $extended, $need_removing_empty_extended) = @_;
-
-    my $pt = read_one($hd, $extended->{start}) or return 0;
-    $pt = { %$extended, %$pt };
-
-    push @{$hd->{extended}}, $pt;
-    @{$hd->{extended}} > 100 and die "oops, seems like we're looping here :(  (or you have more than 100 extended partitions!)";
-
-    if (@{$pt->{normal}} == 0) {
-	$$need_removing_empty_extended = 1;
-	delete $pt->{normal};
-	print "need_removing_empty_extended\n";
-    } elsif (@{$pt->{normal}} > 1) {
-	die "more than one normal partition in extended partition";
-    } else {
-	$pt->{normal} = $pt->{normal}[0];
-	#- in case of extended partitions, the start sector is local to the partition or to the first extended_part!
-	$pt->{normal}{start} += $pt->{start};
-
-	#- the following verification can broke an existing partition table that is
-	#- correctly read by fdisk or cfdisk. maybe the extended partition can be
-	#- recomputed to get correct size.
-	if (!verifyInside($pt->{normal}, $extended)) {
-	    $extended->{size} = $pt->{normal}{start} + $pt->{normal}{size};
-	    verifyInside($pt->{normal}, $extended) or die "partition $pt->{normal}{device} is not inside its extended partition";
-	}
-    }
-
-    if ($pt->{extended}) {
-	$pt->{extended}{start} += $hd->{primary}{extended}{start};
-	return read_extended($hd, $pt->{extended}, $need_removing_empty_extended);
-    } else {
-	1;
-    }
-}
-
-# write the partition table
-sub write {
-    my ($hd) = @_;
-    $hd->{isDirty} or return;
-
-    #- set first primary partition active if no primary partitions are marked as active.
-    if (my @l = @{$hd->{primary}{raw}}) {
-	foreach (@l) { 
-	    $_->{local_start} = $_->{start}; 
-	    $_->{active} ||= 0;
-	}
-	$l[0]{active} = 0x80 if !grep { $_->{active} } @l;
-    }
-
-    #- last chance for verification, this make sure if an error is detected,
-    #- it will never be writed back on partition table.
-    verifyParts($hd);
-
-    $hd->write(0, $hd->{primary}{raw}, $hd->{primary}{info}) or die "writing of partition table failed";
-
-    #- should be fixed but a extended exist with no real extended partition, that blanks mbr!
-    if (arch() !~ /^sparc/) {
-	foreach (@{$hd->{extended}}) {
-	    # in case of extended partitions, the start sector must be local to the partition
-	    $_->{normal}{local_start} = $_->{normal}{start} - $_->{start};
-	    $_->{extended} and $_->{extended}{local_start} = $_->{extended}{start} - $hd->{primary}{extended}{start};
-
-	    $hd->write($_->{start}, $_->{raw}) or die "writing of partition table failed";
-	}
-    }
-    $hd->{isDirty} = 0;
-    $hd->{hasBeenDirty} = 1; #- used in undo (to know if undo should believe isDirty or not)
-
-    if ($hd->{needKernelReread} && ref($hd->{needKernelReread}) eq 'ARRAY' && $::isStandalone) {
-	#- we've only been adding partitions. Try special add_partition (using BLKPG_ADD_PARTITION)
-	local *F;
-	partition_table_raw::openit($hd, *F) or goto force_reread;
-
-	foreach (@{$hd->{needKernelReread}}) {
-	    c::add_partition(fileno F, $_->{start}, $_->{size}, $_->{device} =~ /(\d+)$/)
-		or goto force_reread;
-	}
-    } elsif ($hd->{needKernelReread}) {
-      force_reread:
-	#- now sync disk and re-read the partition table
-	common::sync();
-
-	my @magic_parts = grep { $_->{isMounted} && $_->{real_mntpoint} } get_normal_parts($hd);
-	foreach (@magic_parts) {
-	    syscall_('umount', $_->{real_mntpoint}) or log::l(_("error unmounting %s: %s", $_->{real_mntpoint}, "$!"));
-	}
-	$hd->kernel_read;
-	foreach (@magic_parts) {
-	    syscall_('mount', , $_->{real_mntpoint}, type2fs($_), c::MS_MGC_VAL()) or log::l(_("mount failed: ") . "$!");
-	}
-    }
-    $hd->{needKernelReread} = 0;
-}
-
-sub active {
-    my ($hd, $part) = @_;
-
-    $_->{active} = 0 foreach @{$hd->{primary}{normal}};
-    $part->{active} = 0x80;
-    $hd->{isDirty} = 1;
-}
-
-
-# remove a normal partition from hard drive hd
-sub remove {
-    my ($hd, $part) = @_;
-    my $i;
-
-    #- first search it in the primary partitions
-    $i = 0; foreach (@{$hd->{primary}{normal}}) {
-	if ($_ eq $part) {
-	    splice(@{$hd->{primary}{normal}}, $i, 1);
-	    %$_ = (); #- blank it
-
-	    $hd->raw_removed($hd->{primary}{raw});
-	    return $hd->{isDirty} = $hd->{needKernelReread} = 1;
-	}
-	$i++;
-    }
-
-    my ($first, $second, $third) = map { $_->{normal} } @{$hd->{extended} || []};
-    if ($third && $first eq $part) {
-	die "Can't handle removing hda5 when hda6 is not the second partition" if $second->{start} > $third->{start};
-    }      
-
-    #- otherwise search it in extended partitions
-    foreach (@{$hd->{extended} || []}) {
-	$_->{normal} eq $part or next;
-
-	delete $_->{normal}; #- remove it
-	remove_empty_extended($hd);
-	assign_device_numbers($hd);
-
-	return $hd->{isDirty} = $hd->{needKernelReread} = 1;
-    }
-    0;
-}
-
-# create of partition at starting at `start', of size `size' and of type `type' (nice comment, uh?)
-sub add_primary {
-    my ($hd, $part) = @_;
-
-    {
-	local $hd->{primary}{normal}; #- save it to fake an addition of $part, that way add_primary do not modify $hd if it fails
-	push @{$hd->{primary}{normal}}, $part;
-	adjust_main_extended($hd); #- verify
-	$hd->raw_add($hd->{primary}{raw}, $part);
-    }
-    push @{$hd->{primary}{normal}}, $part; #- really do it
-}
-
-sub add_extended {
-    arch() =~ /^sparc|ppc/ and die _("Extended partition not supported on this platform");
-
-    my ($hd, $part, $extended_type) = @_;
-    $extended_type =~ s/Extended_?//;
-
-    my $e = $hd->{primary}{extended};
-
-    if ($e && !verifyInside($part, $e)) {
-	#-die "sorry, can't add outside the main extended partition" unless $::unsafe;
-	my $end = $e->{start} + $e->{size};
-	my $start = min($e->{start}, $part->{start});
-	$end = max($end, $part->{start} + $part->{size}) - $start;
-
-	{ #- faking a resizing of the main extended partition to test for problems
-	    local $e->{start} = $start;
-	    local $e->{size} = $end - $start;
-	    eval { verifyPrimary($hd->{primary}) };
-	    $@ and die
-_("You have a hole in your partition table but I can't use it.
-The only solution is to move your primary partitions to have the hole next to the extended partitions.");
-	}
-    }
-
-    if ($e && $part->{start} < $e->{start}) {
-	my $l = first (@{$hd->{extended}});
-
-	#- the first is a special case, must recompute its real size
-	$l->{start} = round_down($l->{normal}{start} - 1, $hd->cylinder_size());
-	$l->{size} = $l->{normal}{start} + $l->{normal}{size} - $l->{start};
-	my $ext = { %$l };
-	unshift @{$hd->{extended}}, { type => 5, raw => [ $part, $ext, {}, {} ], normal => $part, extended => $ext };
-	#- size will be autocalculated :)
-    } else {
-	my ($ext, $ext_size) = is_empty_array_ref($hd->{extended}) ?
-	  ($hd->{primary}, -1) : #- -1 size will be computed by adjust_main_extended
-	  (top(@{$hd->{extended}}), $part->{size});
-	my %ext = ( type => $extended_type || 5, start => $part->{start}, size => $ext_size );
-
-	$hd->raw_add($ext->{raw}, \%ext);
-	$ext->{extended} = \%ext;
-	push @{$hd->{extended}}, { %ext, raw => [ $part, {}, {}, {} ], normal => $part };
-    }
-    $part->{start}++; $part->{size}--; #- let it start after the extended partition sector
-    adjustStartAndEnd($hd, $part);
-
-    adjust_main_extended($hd);
-}
-
-sub add {
-    my ($hd, $part, $primaryOrExtended, $forceNoAdjust) = @_;
-
-    get_normal_parts($hd) >= ($hd->{device} =~ /^rd/ ? 7 : $hd->{device} =~ /^(sd|ida|cciss|ataraid)/ ? 15 : 63) and cdie "maximum number of partitions handled by linux reached";
-
-    $part->{notFormatted} = 1;
-    $part->{isFormatted} = 0;
-    $part->{rootDevice} = $hd->{device};
-    $part->{start} ||= 1 if arch() !~ /^sparc/; #- starting at sector 0 is not allowed
-    adjustStartAndEnd($hd, $part) unless $forceNoAdjust;
-
-    my $e = $hd->{primary}{extended};
-    my $nb_primaries = $hd->{device} =~ /^rd/ ? 3 : 1;
-
-    if (arch() =~ /^sparc|ppc/ ||
-	$primaryOrExtended eq 'Primary' ||
-	$primaryOrExtended !~ /Extended/ && @{$hd->{primary}{normal} || []} < $nb_primaries) {
-	eval { add_primary($hd, $part) };
-	goto success if !$@;
-    }
-    eval { add_extended($hd, $part, $primaryOrExtended) } if $hd->hasExtended; #- try adding extended
-    if ($@ || !$hd->hasExtended) {
-	eval { add_primary($hd, $part) };
-	die $@ if $@; #- send the add extended error which should be better
-    }
-  success:
-    assign_device_numbers($hd);
-    $hd->{isDirty} = 1;
-    push @{$hd->{needKernelReread} ||= []}, $part if !$hd->{needKernelReread} || ref($hd->{needKernelReread}) eq 'ARRAY'
-}
-
-# search for the next partition
-sub next {
-    my ($hd, $part) = @_;
-
-    first(
-	  sort { $a->{start} <=> $b->{start} }
-	  grep { $_->{start} >= $part->{start} + $part->{size} }
-	  get_normal_parts($hd)
-	 );
-}
-sub next_start {
-    my ($hd, $part) = @_;
-    my $next = &next($hd, $part);
-    $next ? $next->{start} : $hd->{totalsectors};
-}
-
-sub load {
-    my ($hd, $file, $force) = @_;
-
-    local *F;
-    open F, $file or die _("Error reading file %s", $file);
-
-    my $h;
-    {
-	local $/ = "\0";
-	eval <F>;
-    }
-    $@ and die _("Restoring from file %s failed: %s", $file, $@);
-
-    ref $h eq 'ARRAY' or die _("Bad backup file");
-
-    my %h; @h{@fields2save} = @$h;
-
-    $h{totalsectors} == $hd->{totalsectors} or $force or cdie "bad totalsectors";
-
-    #- unsure we don't modify totalsectors
-    local $hd->{totalsectors};
-
-    @{$hd}{@fields2save} = @$h;
-
-    delete @$_{qw(isMounted isFormatted notFormatted toFormat toFormatUnsure)} foreach get_normal_parts($hd);
-    $hd->{isDirty} = $hd->{needKernelReread} = 1;
-}
-
-sub save {
-    my ($hd, $file) = @_;
-    my @h = @{$hd}{@fields2save};
-    local *F;
-    require Data::Dumper;
-    open F, ">$file"
-      and print F Data::Dumper->Dump([\@h], ['$h']), "\0"
-      or die _("Error writing to file %s", $file);
-}
diff --git a/perl-install/patch/patch-oem-hp.pl b/perl-install/patch/patch-oem-hp.pl
deleted file mode 100644
index 0a5b0b51e..000000000
--- a/perl-install/patch/patch-oem-hp.pl
+++ /dev/null
@@ -1,323 +0,0 @@
-use modules;
-package modules;
-my $old_load_raw = \&load_raw;
-undef *load_raw;
-*load_raw = sub {
-    &$old_load_raw;
-
-    my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_;
-    foreach (@l) {
-	if ($_->[0] eq 'ehci-hcd') {
-	    add_alias('usb-interface1', $_->[0]);
-	}
-    }
-
-    if (get_alias("usb-interface") || get_alias("usb-interface1")) {
-	unless (-e "/proc/bus/usb/devices") {
-	    require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-	    #- ensure keyboard is working, the kernel must do the job the BIOS was doing
-	    sleep 4;
-	    load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	}
-    }
-};
-
-my $old_load = \&load;
-undef *load;
-*load = sub {
-    &$old_load;
-
-    #- hack to get back usb-interface (even if already loaded by stage1)
-    #- NOTE load_multi is not used for that so not overloaded to fix that too.
-    if ($_[0] =~ /usb-[uo]hci/ && !get_alias("usb-interface")) {
-	add_alias('usb-interface', $_[0]);
-    } elsif ($_[0] eq 'ehci-hcd' && !get_alias("usb-interface1")) {
-	add_alias('usb-interface1', $_[0]);
-    }
-
-    if (get_alias("usb-interface") || get_alias("usb-interface1")) {
-	unless (-e "/proc/bus/usb/devices") {
-	    require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-	    #- ensure keyboard is working, the kernel must do the job the BIOS was doing
-	    sleep 4;
-	    load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	}
-    }
-};
-
-#- ensure it is loaded using this patch.
-$::noauto or modules::load_thiskind("usb"); 
-sleep 2;
-
-use install_steps;
-package install_steps;
-
-my $old_beforeInstallPackages = \&beforeInstallPackages;
-undef *beforeInstallPackages;
-*beforeInstallPackages = sub {
-    &$old_beforeInstallPackages;
-
-    my ($o) = @_;
-    mkdir "$o->{prefix}$_" foreach qw(/boot /usr /usr/share /usr/share/mdk);
-    install_any::getAndSaveFile("Mandrake/base/oem-message-graphic", "$o->{prefix}/boot/oem-message-graphic");
-    install_any::getAndSaveFile("Mandrake/base/oem-background.png", "$o->{prefix}/usr/share/mdk/oem-background.png");
-};
-
-my $old_afterInstallPackages = \&afterInstallPackages;
-undef *afterInstallPackages;
-*afterInstallPackages = sub {
-    &$old_afterInstallPackages;
-
-    my ($o) = @_;
-
-    #- lilo image.
-    rename "$o->{prefix}/boot/lilo-graphic/message", "$o->{prefix}/boot/lilo-graphic/message.orig";
-    system "chroot", $o->{prefix}, "cp", "-f", "/boot/oem-message-graphic", "/boot/lilo-graphic/message";
-
-    #- KDE desktop background.
-    if (-e "$o->{prefix}/usr/share/config/kdesktoprc") {
-	update_gnomekderc("$o->{prefix}/usr/share/config/kdesktoprc", "Desktop0",
-			  MultiWallpaperMode => "NoMulti",
-			  Wallpaper => "/usr/share/mdk/oem-background.png",
-			  WallpaperMode => "Scaled",
-			 );
-    }
-    #- GNOME desktop background.
-    if (-e "$o->{prefix}/etc/gnome/config/Background") {
-	update_gnomekderc("$o->{prefix}/etc/gnome/config/Background", "Default",
-			  wallpaper => "/usr/share/mdk/oem-background.png",
-			  wallpaperAlign => "3",
-			 );
-    }
-
-    #- make sure no error can be forwarded, test staroffice installed and OpenOffice.org,
-    #- remove the first if the second is installed.
-    eval {
-	if (!$o->{isUpgrade} && -e "$o->{prefix}/usr/lib/openoffice/program/soffice.bin" && grep { -e "$o->{prefix}/usr/lib/office60_$_/program/soffice.bin" } qw(de en es fr it)) {
-	    require run_program;
-	    log::l("removing OpenOffice.org as staroffice is installed");
-	    run_program::rooted($o->{prefix}, "rpm", "-e", "OpenOffice.org");
-	}
-    };
-};
-
-use install_any;
-package install_any;
-
-undef *copy_advertising;
-*copy_advertising = sub {
-    my ($o) = @_;
-
-    return if $::rootwidth < 800;
-
-    my $f;
-    my $source_dir = "Mandrake/share/advertising";
-    foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
-	$f = getFile("$source_dir$_/list") or next;
-	$source_dir = "$source_dir$_";
-    }
-    if (my @files = <$f>) {
-	my $dir = "$o->{prefix}/tmp/drakx-images";
-	mkdir $dir;
-	unlink glob_("$dir/*");
-	foreach (@files) {
-	    chomp;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.png/\.pl/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.pl/_icon\.png/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/_icon\.png/\.png/;
-	}
-	@advertising_images = map { $_ && -e "$dir/$_" ? ("$dir/$_") : () } @files;
-    }
-};
-
-#undef *allowNVIDIA_rpms;
-#*allowNVIDIA_rpms = sub {
-#    my ($packages) = @_;
-#    require pkgs;
-#    if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
-#	#- at this point, we can allow using NVIDIA 3D acceleration packages.
-#	my @rpms;
-#	foreach (keys %{$packages->{names}}) {
-#	    my ($ext, $version, $release) = /kernel[^-]*(-smp|-enterprise|-secure)?(?:-(\d.*?)\.(\d+\.\d+mdk))?$/ or next;
-#	    my $p = pkgs::packageByName($packages, $_);
-#	    pkgs::packageSelectedOrInstalled($p) or next;
-#	    $version or ($version, $release) = (pkgs::packageVersion($p), pkgs::packageRelease($p));
-#	    my $name = "NVIDIA_kernel-$version-$release$ext";
-#	    pkgs::packageByName($packages, $name) or return;
-#	    push @rpms, $name;
-#	}
-#	@rpms > 0 or return;
-#	return [ @rpms, "NVIDIA_GLX" ];
-#    }
-#};
-
-use detect_devices;
-package detect_devices;
-
-undef *usbMice;
-*usbMice = sub { grep { ($_->{media_type} =~ /\|Mouse/ || $_->{driver} =~ /Mouse:USB/) &&
-			  $_->{driver} !~ /Tablet:wacom/} usb_probe() };
-
-use Xconfigurator;
-package Xconfigurator;
-
-undef *cardConfigurationAuto;
-*cardConfigurationAuto = sub {
-    my @cards;
-    if (my @c = grep { $_->{driver} =~ /(Card|Server):/ } detect_devices::probeall()) {
-	@c >= 2 && $c[0]{description} eq $c[1]{description} && $c[0]{description} =~ /82830 CGC/ and shift @c;
-	foreach my $i (0..$#c) {
-	    local $_ = $c[$i]->{driver};
-	    my $card = { identifier => ($c[$i]{description} . (@c > 1 && " $i")) };
-	    $card->{type} = $1 if /Card:(.*)/;
-	    $card->{server} = $1 if /Server:(.*)/;
-	    $card->{driver} = $1 if /Driver:(.*)/;
-	    $card->{flags}{needVideoRam} = /86c368|S3 Inc|Tseng.*ET6\d00/;
-	    $card->{busid} = "PCI:$c[$i]{pci_bus}:$c[$i]{pci_device}:$c[$i]{pci_function}";
-	    push @{$card->{lines}}, @{$lines{$card->{identifier}} || []};
-	    push @cards, $card;
-	}
-    }
-    #- take a default on sparc if nothing has been found.
-    if (arch() =~ /^sparc/ && !@cards) {
-        log::l("Using probe with /proc/fb as nothing has been found!");
-	local $_ = cat_("/proc/fb");
-	if (/Mach64/) { push @cards, { server => "Mach64" } }
-	elsif (/Permedia2/) { push @cards, { server => "3DLabs" } }
-	else { push @cards, { server => "Sun24" } }
-    }
-    #- special case for dual head card using only one busid.
-    @cards = map { my $dup = $_->{identifier} =~ /MGA G[45]50/ ? 2 : 1;
-		   if ($dup > 1) {
-		       my @result;
-		       my $orig = $_;
-		       foreach (1..$dup) {
-			   my $card = {};
-			   add2hash($card, $orig);
-			   push @result, $card;
-		       }
-		       @result;
-		   } else {
-		       ($_);
-		   }
-	       } @cards;
-    #- make sure no type are already used, duplicate both screen
-    #- and rename type (because used as id).
-    if (@cards > 1) {
-	my $card = 1;
-	foreach (@cards) {
-	    updateCardAccordingName($_, $_->{type}) if $_->{type};
-	    $_->{type} = "$_->{type} $card";
-	    $card++;
-	}
-    }
-    #- in case of only one cards, remove all busid reference, this will avoid
-    #- need of change of it if the card is moved.
-    #- on many PPC machines, card is on-board, busid is important, leave?
-    @cards == 1 and delete $cards[0]{busid} if arch() !~ /ppc/;
-    @cards;
-};
-
-use mouse;
-package mouse;
-undef *detect;
-*detect = sub {
-    if (arch() =~ /^sparc/) {
-	return fullname2mouse("sunmouse|Sun - Mouse");
-    }
-    if (arch() eq "ppc") {
-        return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? 
-			      "USB|1 button" :
-			      #- No need to search for an ADB mouse.  If I did, the PPC kernel would
-			      #- find one whether or not I had one installed!  So..  default to it.
-			      "busmouse|1 button");
-    }
-
-    my @wacom;
-    my $fast_mouse_probe = sub {
-	my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
-
-	if (modules::get_alias("usb-interface")) {
-	    if (my (@l) = detect_devices::usbMice()) {
-		log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
-		eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
-		if (!$@ && detect_devices::tryOpen("usbmouse")) {
-		    my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
-		    $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
-		    return $mouse;
-		}
-		eval { modules::unload($_) foreach qw(usbmouse mousedev hid) };
-	    }
-	}
-	$auxmouse;
-    };
-
-    if (modules::get_alias("usb-interface")) {
-	my $keep_mouse;
-	if (my (@l) = detect_devices::usbWacom()) {
-	    log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
-	    eval { modules::load("wacom"); modules::load("evdev"); };
-	    unless ($@) {
-		foreach (0..$#l) {
-		    detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
-		}
-	    }
-	    $keep_mouse or eval { modules::unload("evdev"); modules::unload("wacom"); };
-	}
-    }
-
-    #- at this level, not all possible mice are detected so avoid invoking serial_probe
-    #- which takes a while for its probe.
-    if ($::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$mouse and return ($mouse, @wacom);
-    }
-
-    #- probe serial device to make sure a wacom has been detected.
-    eval { modules::load("serial") };
-    my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
-
-    if (!$::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
-	$r and return ($r, @wacom);
-	$mouse and return ($mouse, @wacom);
-    } else {
-	$r and return ($r, @wacom);
-    }
-
-    #- in case only a wacom has been found, assume an inexistant mouse (necessary).
-    @wacom and return { CLASS      => 'MOUSE',
-			nbuttons   => 2,
-			device     => "nothing",
-			MOUSETYPE  => "Microsoft",
-			XMOUSETYPE => "Microsoft"}, @wacom;
-
-    if (!modules::get_alias("usb-interface") && detect_devices::is_a_recent_computer() && $::isInstall && !$::noauto) {
-	#- special case for non detected usb interface on a box with no mouse.
-	#- we *must* find out if there really is no usb, otherwise the box may
-	#- not be accessible via the keyboard (if the keyboard is USB)
-	#- the only way to know this is to make a full pci probe
-	modules::load_thiskind("usb", '', 'unsafe'); 
-	if (my $mouse = $fast_mouse_probe->()) {
-	    return $mouse;
-	}
-    }
-
-    if (modules::get_alias("usb-interface")) {
-	eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
-	sleep 1;
-	if (!$@ && detect_devices::tryOpen("usbmouse")) {
-	    #- defaults to generic USB mouse on usbmouse.
-	    log::l("defaulting to usb generic mouse");
-	    return fullname2mouse("USB|Generic", unsafe => 1);
-	}
-    }
-
-    #- defaults to generic serial mouse on ttyS0.
-    #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
-    return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
-};
diff --git a/perl-install/perl2etags b/perl-install/perl2etags
deleted file mode 100755
index 6eed722c0..000000000
--- a/perl-install/perl2etags
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/usr/bin/perl -p
-
-if (/^/ ... !/^/) {
-    ($package) = /(.*).pm,/;
-    $package =~ s|/|::|g;
-}
-
-s/(\x7F)(sub\s+)?(\w+)(\([^)]*\))?/$1${package}::$3/;
diff --git a/perl-install/pixmaps/X.png b/perl-install/pixmaps/X.png
deleted file mode 100644
index c355a6c67..000000000
--- a/perl-install/pixmaps/X.png
+++ /dev/null
diff --git a/perl-install/pixmaps/arrow_down.xpm b/perl-install/pixmaps/arrow_down.xpm
deleted file mode 100644
index 30cca10b1..000000000
--- a/perl-install/pixmaps/arrow_down.xpm
+++ /dev/null
@@ -1,14 +0,0 @@
-/* XPM */
-static char * arrow_down_xpm[] = {
-"6 8 3 1",
-" 	c None",
-".	c #BABEDA",
-"+	c #000000",
-"..++..",
-"..++..",
-"..++..",
-"..++..",
-"++++++",
-"++++++",
-".++++.",
-"..++.."};
diff --git a/perl-install/pixmaps/arrow_up.xpm b/perl-install/pixmaps/arrow_up.xpm
deleted file mode 100644
index fc3c53131..000000000
--- a/perl-install/pixmaps/arrow_up.xpm
+++ /dev/null
@@ -1,14 +0,0 @@
-/* XPM */
-static char * arrow_up_xpm[] = {
-"6 8 3 1",
-" 	c None",
-".	c #999ABD",
-"+	c #000000",
-"..++..",
-".++++.",
-"++++++",
-"++++++",
-"..++..",
-"..++..",
-"..++..",
-"..++.."};
diff --git a/perl-install/pixmaps/bootdisk.png b/perl-install/pixmaps/bootdisk.png
deleted file mode 100644
index 0d29e613d..000000000
--- a/perl-install/pixmaps/bootdisk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/bootloader.png b/perl-install/pixmaps/bootloader.png
deleted file mode 100644
index 03c2010f7..000000000
--- a/perl-install/pixmaps/bootloader.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors.png b/perl-install/pixmaps/colors.png
deleted file mode 100644
index 8de1929b4..000000000
--- a/perl-install/pixmaps/colors.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors16.png b/perl-install/pixmaps/colors16.png
deleted file mode 100644
index 76de54753..000000000
--- a/perl-install/pixmaps/colors16.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors8.png b/perl-install/pixmaps/colors8.png
deleted file mode 100644
index 904517e2f..000000000
--- a/perl-install/pixmaps/colors8.png
+++ /dev/null
diff --git a/perl-install/pixmaps/default.png b/perl-install/pixmaps/default.png
deleted file mode 100644
index bcbca644d..000000000
--- a/perl-install/pixmaps/default.png
+++ /dev/null
diff --git a/perl-install/pixmaps/eth_card_mini.png b/perl-install/pixmaps/eth_card_mini.png
deleted file mode 100644
index 0af32dbaf..000000000
--- a/perl-install/pixmaps/eth_card_mini.png
+++ /dev/null
diff --git a/perl-install/pixmaps/exit.png b/perl-install/pixmaps/exit.png
deleted file mode 100644
index 7e4e1e1d5..000000000
--- a/perl-install/pixmaps/exit.png
+++ /dev/null
diff --git a/perl-install/pixmaps/harddrive.png b/perl-install/pixmaps/harddrive.png
deleted file mode 100644
index d0b4adf71..000000000
--- a/perl-install/pixmaps/harddrive.png
+++ /dev/null
diff --git a/perl-install/pixmaps/keyboard.png b/perl-install/pixmaps/keyboard.png
deleted file mode 100644
index e5ce33e37..000000000
--- a/perl-install/pixmaps/keyboard.png
+++ /dev/null
diff --git a/perl-install/pixmaps/language.png b/perl-install/pixmaps/language.png
deleted file mode 100644
index 0ad06711f..000000000
--- a/perl-install/pixmaps/language.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1024.png b/perl-install/pixmaps/monitor-1024.png
deleted file mode 100644
index 6ed801825..000000000
--- a/perl-install/pixmaps/monitor-1024.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1280.png b/perl-install/pixmaps/monitor-1280.png
deleted file mode 100644
index b338ecb28..000000000
--- a/perl-install/pixmaps/monitor-1280.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-640.png b/perl-install/pixmaps/monitor-640.png
deleted file mode 100644
index e0738b936..000000000
--- a/perl-install/pixmaps/monitor-640.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-800.png b/perl-install/pixmaps/monitor-800.png
deleted file mode 100644
index 04f4b861c..000000000
--- a/perl-install/pixmaps/monitor-800.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor.png b/perl-install/pixmaps/monitor.png
deleted file mode 100644
index bacf844ba..000000000
--- a/perl-install/pixmaps/monitor.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse.png b/perl-install/pixmaps/mouse.png
deleted file mode 100644
index dfd58624a..000000000
--- a/perl-install/pixmaps/mouse.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b+.xpm b/perl-install/pixmaps/mouse_3b+.xpm
deleted file mode 100644
index b424fc722..000000000
--- a/perl-install/pixmaps/mouse_3b+.xpm
+++ /dev/null
@@ -1,386 +0,0 @@
-/* XPM */
-static char * mouse_3b+_xpm[] = {
-"210 350 33 1",
-" 	c None",
-".	c #020202",
-"+	c #142753",
-"@	c #FE9A02",
-"#	c #BD8B25",
-"$	c #9E9EC1",
-"%	c #525E81",
-"&	c #F2AD19",
-"*	c #A3A4C3",
-"=	c #7B673F",
-"-	c #6F7892",
-";	c #4B5576",
-">	c #FEB212",
-",	c #77819E",
-"'	c #FEBA20",
-")	c #414A66",
-"!	c #F2B226",
-"~	c #AF8F4B",
-"{	c #E6AA32",
-"]	c #F2B22A",
-"^	c #384365",
-"/	c #0A1128",
-"(	c #33395F",
-"_	c #8089A6",
-":	c #AEB2CF",
-"<	c #898BA4",
-"[	c #0F1C3D",
-"}	c #BABEDA",
-"|	c #6D6E91",
-"1	c #A9ADCA",
-"2	c #283861",
-"3	c #999ABD",
-"4	c #606C8C",
-"                                                                                                |4;-333[/[                                                                                                        ",
-"                                                                                                44;,333[[/                                                                                                        ",
-"                                                                                                44)_33-[/[                                                                                                        ",
-"                                                                                                4%;_33-[[/                                                                                                        ",
-"                                                                                                4%)3334[/[                                                                                                        ",
-"                                                                                                %4)$33;[/                                                                                                         ",
-"                                                                                                4%;$33;[/                                                                                                         ",
-"                                                                                                %%%333)[[                                                                                                         ",
-"                                                                                                %%%3332[/                                                                                                         ",
-"                                                                                                %%%3332[/                                                                                                         ",
-"                                                                                                %%%$332[/                                                                                                         ",
-"                                                                                               |%;-33<2[[                                                                                                         ",
-"                                                                                               4%;|333[//                                                                                                         ",
-"                                                                                               %%)4333[[[                                                                                                         ",
-"                                                                                               4;;|33<[/[                                                                                                         ",
-"                                                                                               4;;4333[[/                                                                                                         ",
-"                                                                                               4%;|333[[[                                                                                                         ",
-"                                                                                               %%;_33<[[/                                                                                                         ",
-"                                                                                               %%)_333[[[                                                                                                         ",
-"                                                                                               %%)_333[[/                                                                                                         ",
-"                                                                                               ;;),33<[[[                                                                                                         ",
-"                                                                                               ;;)_333[[/                                                                                                         ",
-"                                                                                               ;;^,333[[[                                                                                                         ",
-"                                                                                               %))433<[[/                                                                                                         ",
-"                                                                                               4;)4333[[[                                                                                                         ",
-"                                                                                               4;;-333[[/                                                                                                         ",
-"                                                                                               %;)433<+[[                                                                                                         ",
-"                                                                                               %;)43332[/                                                                                                         ",
-"                                                                                               ;)^|33<([[                                                                                                         ",
-"                                                                                                ;)%3332[/                                                                                                         ",
-"                                                                                                ;^;3332[[                                                                                                         ",
-"                                                                                                ;;;333^[[                                                                                                         ",
-"                                                                                                4%)$33%[[                                                                                                         ",
-"                                                                                                ,4^33$%+[++                                                                                                       ",
-"                                                                                               $34^333,2++22                                                                                                      ",
-"                                                                                              13_%-33333)2222                                                                                                     ",
-"                                                                                             33_4_333333<;22++                                                                                                    ",
-"                                                                                             ,,4_3$33333$3%2+++                                                                                                   ",
-"                                                                                             %%433333333333%[[[                                                                                                   ",
-"                                                                                             ;)^333333333333+/[                                                                                                   ",
-"                                                                                             ))2$33333333333([[                                                                                                   ",
-"                                                                                             ;;^$33<33333333)[[                                                                                                   ",
-"                                                                                             ))^$33333333333%[/[                                                                                                  ",
-"                                                                                             ;)^,333333<3333-[[[                                                                                                  ",
-"                                                                                             ;;),333<3333333_+/[                                                                                                  ",
-"                                                                                             ;))_333333333333+[[                                                                                                  ",
-"                                                                                             ;))|33333333<3332[[                                                                                                  ",
-"                                                                                             %)^|333333333333;/[                                                                                                  ",
-"                                                                                             %%)4333333333333%[[[                                                                                                 ",
-"                                                                                             _4;|333333333333-[[[                                                                                                 ",
-"                                                                                              ,%;-|;%%%))%%%%4+[+                                                                                                 ",
-"                                                                                          1:1*<%(++++[++[+[+[+[2(%-,_,                                                                                            ",
-"                                                                                      :1111$$<|)2[+[+++))+++[++2^%|,,,,,,                                                                                         ",
-"                                                                                   ::::1$3<,||-,<3:}}}}}:}}}}:33,4-%44--,-,--                                                                                     ",
-"                                                                                 :::*$3_-,<1}}}}}}}}}}}}}}:}}:}:}}}}1_-%%4||4-4                                                                                   ",
-"                                                                              :::1$3_,_$}}}}}}}:1**$$33333333$$$*1::}}}}1,;;44|4|                                                                                 ",
-"                                                                            :::1*<,4),}}::1*333333333$3$3333$3333333$}}:},22);%%444%                                                                              ",
-"                                                                          ::::*<4,{;2+}}3333333333$<$<33333333<33333331}}2+[%=2);%%44                                                                             ",
-"                                                                         :::$<-<&>!#++,}*333333333$3$3333333<3$333333331_+[(>>#=2^;;%%%                                                                           ",
-"                                                                       :::*3-,{'>>>>2+;}:3333333333$<3333333$$<333333333;++=>'>&{=2^);;;%                                                                         ",
-"                                                                      ::13--{>>>>>>>=[+}}333333<3333$333<3333$3$3333333$2[+#>>>>>&#;(^);;;                                                                        ",
-"                                                                    ::1*<-~>>>>>>>>&#++$}$333333333333333333$<$<3333333<+++>'>>>>'>>#22^)));                                                                      ",
-"                                                                   ::13,='''>>&&@&>>#+[-}}333333333333333333$333333333$-+[)>>>>>>>>>>&=22))))                                                                     ",
-"                                                                 ::11<-~'>&&@@@@@>>>>++%:}33333333333333333333333<3333$4[+=>>>>>>>>>>>'#22^)))^                                                                   ",
-"                                                                }:1*,-&''&@@@@@@@>>'>)+(}}1$333333<333333333333333<3331^++#>>'>>>>>>>>>>{;+^^^^^                                                                  ",
-"                                                               :1*34~''&@@@@@@@@&>>>&=++}}}333333333<33333333333$33333}+++#>>>>>'>>>>>>>>'=+2^^^(                                                                 ",
-"                                                              ::1<-#'&@@@@@@@@@@>>>>>=[+3}}1333333333333<3333333333333}+++''>>>>>>'>>>>>>>'#2+2^2^                                                                ",
-"                                                             :1*_4{'&@@@@@@@@@@'>>>>>#+[3}}:3333<$3$%[[++[+23333$<3$313+[(>>>'>>>>>>>>>>>>'>{^22^22                                                               ",
-"                                                            ::3,=!'@@@@@@@@@@@&>>>>>>#++,}}}*33333(^2+[[[[[+((,33$3331<++)>>>>>'>>>>'>>'>>>>>&)22222                                                              ",
-"                                                           11$,,!>@@@@@@@@@@@&>>>>>>>&+[|}}}:33333[/..../././[-3333$3}|+[=>>>>>>>'>>>>>>>>>>>>&=+22222                                                            ",
-"                                                          :13--'>@@@@@@@@@@@@>>>>'>>>>++%}}:}33333+.///./././[-3<3333}|[+=>>>>>>>>>>>'>>>>>>>>>>=+2222+                                                           ",
-"                                                         :*3-,>&@@@@@@@@@@@&>>'>>>>>>>2+)}}}}13333^(2[[[[[[+(^_$$3$3$}%+[#>>>'>>>>'>>>>>>>>>>>>&&=+2+2++                                                          ",
-"                                                        1*3-~>@@@@@@@@@@@@@>>>>>>>>>>>)[)}}}}}3333++[+[+[++++[,33<$31}^+[#>>>>>>>>>>>>>'>>>>>>>>>&=+2+2+                                                          ",
-"                                                       113-->>@@@@@@@@@@@@>>>>>>>>>>>>)+2:}}:}1333+..........[-33$331})++#>>>>>'>>>>'>>>>>>>>>>>>&>=+++++                                                         ",
-"                                                      1*$-='@@@@@@@@@@@@@>>>>>>'>>>&>>=+[}}}}}:$33[//////////[,3<$331}2+[&>>'>>>>'>>>>>>>'>>>>>>>>>>=+2+++                                                        ",
-"                                                     11*_,'&@@@@@@@@@@@@>>>>'>>>>>>>>>=++}:}}}}*33%%^[////[2%%_3$3331:[++>>>>>>>>>>>>>'>>>>>>>>>>>>>&=++2++                                                       ",
-"                                                    :*3,=!>@@@@@@@@@@@@&>>>>>>>>'>>>>>=+[}}}}:}:33++[++++[+[++,333$3:}+++>>>>>'>>>>'>>>>>>>'>>>>>>>>>>)+++++                                                      ",
-"                                                   1**_-!&@@@@@@@@@@@@>>>>>>>'>>>>>>>>#++<}:}}}}*3+..........[-3$<33}:+[(>>'>>>>'>>>>>>>'>>>>>>>>>>>>>>^2++++                                                     ",
-"                                                  1**_4{>@@@@@@@@@@@@&>>>>'>>>>>>>>>>>#[+3}}}}}::3+//////////[,33$33}$++)>>>>>>>>>>>>'>>>>>>>>>>>>>>>>>&++2[++                                                    ",
-"                                                  1*<4{>@@@@@@@@@@@@&>>>>>>>>'>>'>>>>>#++3}:}}}}}$%%^[////[2%%<3$<33}3[[)>>>'>>>>>'>>>>>>'>>>>>>>>>>>>>>@2++[++                                                   ",
-"                                                 1*<-~&@@@@@@@@@@@@@>>>>'>>>>>>>>>'>>>#+[3}}}:}}}1^^2[[[[[[+^^,33333}3++)>>>>>'>>>>>>>>>>>>'>>'>>>>>>>>>!#+++[+                                                   ",
-"                                                1*3,-'@@@@@@@@@@@@>>>>>>>>>>>'>>>>>>>>][+_:}}}}:}}+../...../.[,333$$:3+[;>>>>>>>>>>'>>'>>>>>>>>>>>>>>>>>>>=+++++                                                  ",
-"                                               1*3,-&>@@@@@@@@@@@@>>>>'>>>'>>>>'>>>>>>'[+|}:}}}}}:+[///[/[///+,3333$}<++='>>'>>>'>>>>>>>'>>>>>>>'>>>>>>>>>>^+++[+                                                 ",
-"                                               **<4{>@@@@@@@@@@@&>>>>>>>>>>>>>>>>'>>>>>++|}}}}:}}}4%^[////[+;%<33331}<++=>>>>>>>>>>'>>>>>>'>>'>>>>>>>>>>>>>@++++[+                                                ",
-"                                              13<-~'@@@@@@@@@@@@>>>>'>>>'>>>>>>>>>>'>>>++4}:}}}}:}++++[+++++++-33333}4++='>>>>'>>>>>>'>>>>>>>>>>>>'>>>>>>>>>#++++[                                                ",
-"                                             **3-,'@@@@@@@@@@@&>>'>>>>>>>>'>>'>>>>>>'>][+|}}}:}}}:+..........[-33333}-[+=>>'>>&>>>>>>>>>>>>>>>'>>>>>>>>>>>>>>=+++++                                               ",
-"                                             **_=!>@@@@@@@@@@@>>>>>>>>>>>>>>>>>>>'>>>>'++4}}}}}}}}[//////////[,333$3}4++='>>>>>>'>>>>>'>>'>>'>>>>>>>'>>>'>>>>>^++[++                                              ",
-"                                            *3_%{>@@@@@@@@@@>'>>>>>'>>>>>>>>>>'>>>>>>>&^+|:}}}:}}}|4)[/////2%%<333$$}|++=>>>>>>>>>>'>>>>>>>>>>>'>>>>>>>>&>>>>>#++++[                                              ",
-"                                           **<,,'&@@@@@@@@@@>>>>'>>>>'>>>>'>>>>>>>>>>>>)+;}}:}}}:}+++++++++++[,3333$}4++#'>>'>>>>'>>>>>'>>>>>>>>>'>>>>>>&&>>>>>=+++[[                                             ",
-"                                           *3,4&>@@@@@@@@@&>>'>>>>>>>>>'>>>'>>>>>>>>>>>)+^}}}}}}}}+..........[-3333$}|++#>>>>>'>>>>>'>>>>'>>>>>>>>>>>>>>>>@>>>>>(+++++                                            ",
-"                                          *$_4#'@@@@@@@@@@>>>>>>>>>'>>>>>>>>>'>>>>>>>>>)+^}}}:}}}:+//////////[,3333*}4[+#'>>>>>>>>>>>>>>>>>'>>'>>>>'>>>>>>>&>>>>@[+[+[                                            ",
-"                                         **<-~>&@@@@@@@@>>>>>'>>'>>>>>>>>>>>>>'>>'>>>>>)+):}}}:}}}))2[[[[[[+^^-3333$}|++#>>>>>'>>>>>'>>>>>>>>>>>'>>>>>>>>>&&>>>!>=+++[+                                           ",
-"                                         $3_4&>@@@@@@@@@>>>>>>>>>>>>>>'>>'>>>>>>>>>>>>>)+)}}}}}}:}+[[[[[[[[[[[,33333}4++#'>>>>>>'>>>>>'>>'>>>>>>>>>>'>>>>>>>@>>>>>^[++[                                           ",
-"                                        *3<4~'@@@@@@@@&>>>>>>>>>'>>>>>>>>>>>>>>>>'>>>>>)+):}}:}}}:+..........[-3333$}|++#>'>>>>>>>>>>>>>>>>>'>>>>'>>>'>>>>>>&@>>>>#++[++                                          ",
-"                                       $3<,='>@@@@@@@@&>>>>>>>'>>>'>>>>'>>>'>>>'>>>'>>>)+)}}}}}}}}+[[[[[[[[[[[,33333};++#>>>'>>>>'>>>>>'>>>>>>'>>>>>>>>'>>>>>@@>>>>=+[[[+                                         ",
-"                                       $$_4{>@@@@@@@&>>>>>>'>>>>>>>>'>>>>>>>'>>>>>>>>>>)+):}}}:}}}44^[/////2%%,33333})[+#>>>>>'>>>>>'>>>>'>>>>>>>>>>>>>>>>>>>>@&>>>&+++[+                                         ",
-"                                      $3_-~!&@@@@@@@&>>>>'>>>>>>>>>>>>>>>'>>>>>>>>>>>>>)+)}:}}}:}:+[[[/[[[[[[+-3333<})++#'>>>>>>>>'>>>>>>>>'>>>>'>>'>>>>>>>>>>@@>>>>#[++[+                                        ",
-"                                      33,4!>@@@@@@@>>>>>>>>>>>'>>>>>>>'>>>>>>>>'>>>>>>>)+)}}:}}}}}+..........[-3333$})++#>>>>>>'>>>>'>>>>>>>>>>>>>>>>>>>>>>>>>>@@&>&&2+++[                                        ",
-"                                     $3_4~'&@@@@@@>>>>>>>>>>'>>>'>>'>>>>>>>>>'>>>'>>>>>)+)}}}}:}}}[[[[[[[[[[[[,3<333}^++#'>>'>>>>>>>>>'>>>>>'>>>>'>>>'>>'>>>>>>@@@>>>#+[+[+                                       ",
-"                                     33,-'>@@@@@@>>>>>>>>>>>>>>>>>>>>>>>>>'>>>>>>>>>>>>)+):}}}}}:}|4^[/////2%%<3$33$})[+#>>>>>>>>>>>>>>>>'>>>>'>>>>>>>>>>>>>>>>@@@@>>>)+[+[                                       ",
-"                                    $3_4#'&@@@@@>>>>>>'>>'>>>>>>>>>>>'>>'>>>>>>>>>>>>>>)+)}}:}}}}}+[[[[[[[[[[+,33333})++#'>>>>'>>'>>>>>'>>>>>>>>>>>'>>>>>>>>>>>>@@@&>>{[++[+                                      ",
-"                                    3_,=>>@@@@@>>>>>>>>>>>>>>>>'>>'>>>>>>>>>>>'>>>>>>>>)+^}}}:}}}}+..........[-33333})[+#>>>>>>>>>>>'>>>>>'>>>>>'>>>'>>>'>>>>>>>@@@@&>>=[++[[                                     ",
-"                                   $<_4{>&@@@@>>>'>>'>>>>>>>'>>>>>>>>>'>>>>'>>>>'>>>>>>)+^}}}}}:}:+[[[[[[[[[[[-333$1}4++#'>>'>>>>>>>>>>>>>>>'>>>>>>>>>'>>>'>>>>>@@@@@>>{[+[+[                                     ",
-"                                   3<-->>@@@@&>>>>>>>>'>>'>>>>>>>>'>>>>>'>>>>>>>>>>>>>>)+)}}}}}}}}44^[/////24|3333$:}4[+#>>>>'>>'>>>'>>>>>>>>'>>>>>>>>>>>>>>>>>>&@@@@&>>=++[[+                                    ",
-"                                  33,4&>&@@@@>>>>>>>>>>>>>>>>>>'>>>>'>>>>>>>>'>>>>'>>>>)[)}:}:}}}}+[[[[[[[[[[[31333}}|++#'>>>>>>>>'>>>'>>'>>>>>'>>>>'>>>>>>>>>>>>@@@@@&>&+++[[                                    ",
-"                                  3<-->>@@@&'>'>>'>>>>>>>'>>'>>>>>>>>>>>>>'>>>>'>>>>>>>++%}}}}}:}}+..........[<}::}}}4++#>>>>'>>>>>>>>>>>>>>>>>>>'>>>>>'>>>'>>>>>@@@@@@&>=+[+[+                                   ",
-"                                 3<_%&>&@@@>>>>>>>>'>>'>>>>>>>>>>>'>>>>>>>>>>>>>>>>>>>>++4}}}}}}}:++[+++[+[+++3}}}}}}4++#>>>>>>'>>>>>>>'>>>>>'>>>>>>>>>>>'>>>'>>>@@@@@@@'&+++[[                                   ",
-"                                 3<-,'>@@@>>>>'>>>>>>>>>>>>>'>>'>>>>>>'>>>>'>>>'>>>>>>>++|}:}}:}}}4|^[////[244*}}}}}}|+[=>>>>>>>>>>>'>>>>>'>>>>>>>>>>>>>>>>>>>>>>@@@@@@@&>=++[+[                                  ",
-"                                $<_4&>>@@>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>'>>>>>>>>'>>>>>++4}}}}}}:}+[///[////[[3:}:}}}4++='>>>>>>>'>>>>>>>>>>>>>'>>'>>>'>>>>>>>>>>&@@@@@@&>&++[[[                                  ",
-"                                3_-->>@@>>'>>>>>>>>'>>'>>>>>'>>>>>>'>>>>>>>'>>>>>>>>>>&++|:}}:}}}}+..........[3}}}}}:3++=>>'>>'>>>>>>>>'>>>>'>>>>>>'>>>>>'>>>>>>>@@@@@@@@&>=+++[                                  ",
-"                               <<_%&>'@&>>>>'>>>>'>>>>>>>>>>>>'>>'>>>'>>>>>>>'>>>>>>>>{[+4}}}}}:}}[++[+++[+++[3:}:}}}3++='>>>>>>>>>'>>>>>'>>>>>>'>>>>>>>>>>'>>>>>&@@@@@@@@>{[++[[                                 ",
-"                               3<,='>>@>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>'>>>>>>'>>'>>>&~++$}}:}}}:}3<%[.././^<3:}}}}}:3[[=>>'>>>>'>>>'>>>>>>>>'>>>>>>>'>>>>>>>>>>>@@@@@@@@@&&=[++[                                 ",
-"                              <3,4{!>&&>>>>>>>>>>>>>'>>>>'>>>>>'>>>>>>>>>'>>>>>>>>>>>>#[+<}}}}}}}}+[[[[[[[[[[+_}}}}}}3+[)>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>'>>>>'>>>>@@@@@@@@@@&{[+[[[                                ",
-"                              <_,|>>&&>>>'>>>>>>>'>>>>>>>>>>'>>>>>>'>>>>>>>>>>'>>>>>>>#++3}}:}}}}:+..........[3}:}}}:}++)>>>>>>>>>>>>>>>>'>>>>>>'>>>>>>>>'>>>>>>'@@@@@@@@@@@>;++[+                                ",
-"                             3<_4~>>&>>>>>>'>>'>>>>>>>'>>>>>>>>>>'>>>'>>>>>'>>>>'>>>>>=++3}}}}:}}}+[+[++[+[+++<}}}}}}}[+)>>>>>>'>>'>>>>>>>>'>>>>>>'>>>>>>>>>>>>>&@@@@@@@@@@@>#++[[[                               ",
-"                             <_-4'>&&>'>>>>>>>>>>>>'>>>>>'>>>>'>>>>>>>>>'>>>>>>>>>>>>'=[+}}:}}}}:}44)[/////2441}}:}}}}+[+>>>'>>>>>>'>>'>>>>>>>>>>>>>>'>>>>>'>>>>&@@@@@@@@@@@&>^++[+                               ",
-"                             <_4#>>&>>>>>'>>>>>>'>>>>>>'>>>'>>>>>>>>>>>>>>>>>>>>>'>>>>=+[}}}}}}}}}+////[////[[3}}}}:}}^[+>>>>>>>'>>>>>>>'>>>>'>>>>>'>>>'>>>>>>>>@@@@@@@@@@@@@>#[+[[+                              ",
-"                            <<,%#>&>>>'>>>'>>'>>>>>>'>>>>>>>>>>>'>>'>>>>>>>'>>'>>>>>>>;++}}:}:}}}}+..........[3:}}}}}})++>>>>'>>>>>'>>>>>>'>>>>>'>>>>>>>>>>'>>>&@@@@@@@@@@@@@>#[+[[[                              ",
-"                            <_-^=>>>>>>>>>>>>>>>>>>>>>>>>>>>>>'>>>>>>'>>'>>>>>>>>>>>>>)[^}}}}}}:}:++[++[+++[+[3:}}:}}})[+#>>>>>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@>#[++[[                              ",
-"                            __%2=>>>>>>>>>>>>'>>'>>>'>>>'>>'>>>>'>>>>>>>>>>>>>>>>'>>>>(+)}}}:}}}}}44)[////[244*}}}}:}}4++#'>>>>>>>>>>>>>>>>'>>>>'>>>'>>'>>>>>>>@@@@@@@@@@@@@@@=+[++[[                             ",
-"                           3_-;+(>>>>>>>>>>'>>>>>>'>>>'>>>>>>>>>>>'>>>>>>>'>>'>>>>>>>>++)}:}}}:}}}+//////////+<}}}}}}}4++='>>>>'>>>>>>'>>>>>>>>>>>'>>>>>>>>'>>>@@@@@@@@@@@@@@>(++[+[[                             ",
-"                           <,4;++#>>'>>>'>>>>'>>>>>>>>>>'>>>>>>>>>>>'>>'>>>>>>>>>'>>>{++4}}}}}}}}:+..........[3:}}}:}}<++=>'>>>>'>>'>>>'>>>>>>>>>>>>>>>>'>>>>>@@@@@@@@@@@@@@@{+++++[[+                            ",
-"                          <_,%$++=>>>>'>>>>>>>>'>>>>>>>>>>'>>>>>'>>>>>>>>>>'>>>'>>>>>#++|}}:}}}:}}+[+++[++++++3}}:}}}}3++=>>>>>>>>>>>>>>>'>>>'>>>>>>>'>>>>>>>&@@@@@@@@@@@@@@@=+[+2_+/[                            ",
-"                          <,4-})[[{>>>>>>>>>>>>>>>'>>>>>>>>>>'>>>>>>>>>>'>>>'>>>>>>>&#++<}}}:}}}}}44^[/////244$}}}}:}}$+[)>'>>>>'>>>>>>>>>'>>>'>>>>>>>>>>>>>&@@@@@@@@@@@@@@&&++++-}++[                            ",
-"                          _,%*}3+[)>>>>>>'>>>>>>>>>>'>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>=[+3}}}}}}}}}+//////////[3}}}}}}}}+[(>>>'>>>>'>>'>>>>>>>>>>'>>'>>>'>>>>@@@@@@@@@@@@@@@&)+[+21};+[[                           ",
-"                         <_-4}}})+[#>>'>>>>'>>>>>>>>>'>>'>>>>>>>>'>>>>>>>>>>>>>'>>>>>;++1}}}}:}:}}+..........[3:}}}}:}}2++>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@@@&#++++_}}3+[[                           ",
-"                         _,4_}}}*++[#>>>>>>>>'>>'>>>>>>>>>>>>>'>>>>>>>'>>'>>>'>>>'>>>;[+}}}:}}}}}:+++[++++++[+3}:}}}}}:)[+{>>>>>>>>'>>>'>>>'>>>>>'>>>'>>>>@@@@@@@@@@@@@@@&@+[+[%}}}}(+[                           ",
-"                        <<-%:}}}}<+++{>>>>>>>>>>>>>>>'>>>>>'>>>>>>>'>>>>>>'>>>>>>>>>>++^}:}}}}:}}}:}4/.....)}:}}}}}:}}}4+[#>>'>>'>>>>>>>'>>>>>'>>>>>>>>>>@@@@@@@@@@@@@@&>#++++^1}}:}-[[[                          ",
-"                        <_--}}}}}}-+[+#>>>>'>>>>>>'>>>>'>>>>>>>>>'>>>>>>>>>>>>>>>>>>&++%}}}}}}}}}}}}|++[+++)}}}:}}}}}:}-++=>>>>>>>>>>'>>>>>>>>>>>>>'>>>&@@@@@@@@@@@@@@@>{+++[^1}1$:}1[[[                          ",
-"                        _,%3:}}:}}}4+++='>>>'>>'>>>>>>>>>>>'>>'>>>>'>>>>>>>>>>'>>>>>#++4:}}:}}}:}}}}}:}}}:}}}}}}}}:}}}}3++=>>'>>>>'>>>>>'>>>>>>>'>>>>&&@@@@@@@@@@@@@@>>=++[+^:}1331}};[+[                         ",
-"                       <,-%}}}}}}}}:,+++)&>>>>>>>>>>>>>>'>>>>>>>>>>>>'>>>>'>>>>>'>>>=++_}}}}}:}}}:}}}}}}}}}:}}:}}}}}}}}$++)>>>>'>>>>>>>>>>'>>'>>>>>>&@@@@@@@@@@@@@@>>&;+[++;1}*3$33:},+[[                         ",
-"                       <,--}:}}:}}}}}3+[++=>>>>'>>>>>'>>>>>'>>>>>>>>>>>'>>>'>>>>>>''=++$}}:}}}}}}}}}}:}}:}}}}}}:}}:}:}}}+[+>>>>>>>>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@@&>>=+++++4}:333333:}1[[[                         ",
-"                       ,,%1}}}}}}:}}}}:;+++(#&>>>>>'>>>>>>>>>'>>>>>'>>>>>>>>>'>>>>>>^++}:}}}:}}:}:}:}}}}}}:}}}}}}}}}}}:})++{>>>>>'>>'>>>>>>'>>>>&@@@@@@@@@@@@@@&&>#(++[+2<}1$33333$*}};[[[                        ",
-"                      <,-%}}:}}}}}}}}}}},2[+[2#&'>>>>>'>>>>>>>>>'>>>>>>>>>>>>>>>>>>&++(}}}}}}}}}}}}}}}}:}}}}:}}:}}}:}}}}4+[#>>'>>>>>>'>>'>>>>>>@@@@@@@@@@@@@&>>&#(+++++|}}$33333333$}}_+[+                        ",
-"                      _,4,}}}}:}:}}:}:}}}142[+[+={>>>>>>'>>>>>'>>>>>>'>>'>>>>>'>>>>{+[%}}:}}}:}}}}}}}:}}}:}}}}}}}:}}}}:},+[='>>>>>'>>>>>>>>>&@@@@@@@@@@@@&>>>{=([[[++%*}1$3333333333:}:+[[                        ",
-"                      ,,%$}}}}}}}}}}}}:}}}}1-+++[[)={>>>>>>'>>>>>>'>>>>>>>>'>>>>>>&#++-}}}:}}}}}:}:}}}}}}}}}}}:}}}}:}}}}$++)>>>'>>>>>>>>>>@@@@@@@@@&@>>>>>{#)[[++++;*}:3333333333333*}}%[[[                       ",
-"                     <_-%}}:}}}}}:}}}}}}}}}}}:_2++[++^={>>>>>>>>>>>>>>'>>>>>>>>'>>>=[+*:}}}}:}}}}}}}}}}:}}:}}}}}}}}}}:}}}2[+'>>>>>>>>>&@@@@@@@@>&>>&>>>{=;[[[+++2|:}:$3333333333<3333:}_[+[                       ",
-"                     _,4,}}}:}:}}}}:}}}}}}}}}}}}$%+++++[+;#{>>>>>>>'>>>'>>>>'>>>>>&^[2}}}}}}}}}:}}:}:}}}}}}}}:}}:}}}}}}:})+[{>>>>>&&@&@@&@&>'>>>>>>@#;2++[++++;_}}:$3$33333<3333$333$:}:+[[                       ",
-"                     ,,%*}}}}}}}}}}}}:}:}}:}:}:}}}}<%+++[[[[+)=#{>>>>>>>>>'>>>>>>>@++%}}:}}:}}}}}}}}}}:}}:}}}}}}}}:}}}}}}-+[=>>>&&&&>>>>>>>>>>&#=;+[[+[++++%,:}}*$333333333333333333$*}})[[[                      ",
-"                    <,-%}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}*|)++++++[[+)==#@'>>>>>>>>>&~++_}}}:}}:}}:}}}:}}}}}}}}:}}:}}}}:}}}}$++^>>>&>&>>>>&&#==)++[+[++[+[^%3:}}}1333333333333333333333$3}},+[[                      ",
-"                    _,4,}}}:}:}}}}}}:}}}:}}}}}}:}}}}:}}}}}$4;++++[++++++()==###&>>([+}}}}}}:}:}}}:}}}:}}:}}}}}}:}}:}}}:}:}([+{&!###==;^[+++++[+++++)|<:}}}}**3$333333333<333<333333333:}*[[[                      ",
-"                    ,-%3}}}}}}}}}:}}}:}}}}:}:}}}}:}}}}}}}}:}}}1<|)^[+++[+[[+[+++[++++;4444_$$_$_3*}:}}}}}:}}:}}13_$3<3_|4|^++[++++[[[[[+[+[+[2)|,3}}}}}}:*33$3333333333333333333333333*}})[[                      ",
-"                   _,-%}}:}}}}:}}}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}$34%)^[++[++++++++++++++++++[+++++[+++[+++[+++++++++++[+[++[++++++2))|_3:}}}}}}}:1$33$3333333333<333333333333333333}}-+[[                     ",
-"                   ,,4-}}}}:}}}}}:}}}:}:}}}:}:}}:}}}}:}}}}}}:}}}}}}:}}}}}}:}33<44;)^^+[+[+[+[+[+++[+[+++[+++[+++[++[+[++[+++(^^%|433$}}}}}}:}:}}}:1$$3$33$3333$<33333333333333333<33333:}$+[[                     ",
-"                   _,%3}}}}}}}}:}}}:}}}}}:}}}}}}}}:}}}}}}}:}}}}}}}}}11:}}}}}:}}}}}}}}}}}}:333<33<,444444444|444|_33<33<1:}}}}}}}}}}}}:}}}}}}::13333333333333333333333333333<333333333331}}2[[                     ",
-"                   --;::}}:}:}}}}}}}}}:}}}}}:}}:}}}}}:}:}}}}}:}}:}}}}}1$$$$*::}}:}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}:}:}}}:::3$$3333$33333333333333333333333333333333333333}}%+[[                    ",
-"                  <,4-}}}}}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}1*$33<$$*$1*:::}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}}}:}:}:113*333333333333333333333333333333333333333<3333333333:}<[[[                    ",
-"                  ,-4_}}}:}}:}:}}}}:}}}}:}}:}}:}}}:}}}}:}:}}:}}:}}}:}}:}}}}1$$3$33333333$$$3*1**1111:1}:}}}:}:}}}}:1:1:*11**$*333$333$333333333333333333333<3333333333<3333333333<333333:}}+[[                    ",
-"                  ,-%:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}:*3333333333$333333$$$_333333$3$$<$33333333333$33333333333333333333333333<333333333<333<33333333333333333333}};[[                    ",
-"                 ,,4%}}}:}}:}}}:}}:}}}}}:}}:}}}:}}}}}}:}}:}}:}}:}}}}:}}}}}}:}}}:*$333333$3333333$$$$33333$<3$$$<33333333333333333333333333333333333<333333333333333$33333333333333<333333}}-[[[                   ",
-"                 ,,4,}:}}}}}}:}}}}}}:}}}}}}}}:}}}:}}}}}}}}}}}}}}}:}}}}}}}:}}}:}}}}1$33333<$33333_$$$33333333$333333333333333333333333333333333333333333333333333<3333333333333333333333331}*+[[                   ",
-"                 ,-%3}}}}}:}}}}}}:}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}:}}}}}}}}}}:}}1*333$333333$$_333$<33$<3$<33333333333333333333<333333<333<33333333333<33333333333333<333333333333333*}}+[[                   ",
-"                 --;}}}}:}}}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}:}*3333333333333333$$3$33$33333333<33<3333333333<$<333333333333333<3333<333333<333<$3333333333<333333:}%[[[                  ",
-"                ,,44}}}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}}:}}:}}:}:}}:}}}}:}}}:}}}}:}}}}:}}*33333333333333<3$<333<333333333333<3333333333$3333333<333333333333333333333333333<33333333333333}}_[[[                  ",
-"                ,-4_}:}}}}:}}:}}}:}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}::$33333333333$$3$3333333<3333333$33333333333333333333333333333333333<333333333333333333333333331}:+[[                  ",
-"                ,-%$}}}:}}}}}}:}}}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}:}}}}:}}}}}}}}}:}}}}}1*33333333333333333333333333333333333333$<3333333333<33333333333333333333333333<33333<3333333*}}2[[                  ",
-"               _,4;}}}}}}:}}}}}}}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}}}:}}}:}:}}}}:}}}}}}}}}:$333333333333333333333333333<3333<$33$33333333333333333333333333333333333333333333333333333}}%[[[                 ",
-"               ,-44}}}:}}}:}}}}:}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}:}}}}}}}}}}:}}}}}}:}:}:}}}:*3333333333333<3333333333333333$<33<333333<33333333<33333333333333333<3333333333333333333*},[[[                 ",
-"               ,-4_}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}:}}:}}:}}}}}}}:}}}}}}}:}}}}*333333<3333333333333333333333333$3333333333333<$333333<3333333<333333333<333333333333$1}1+[[                 ",
-"               --%*:}}:}}}}}}}:}}}}}:}:}}}}:}:}}:}}}}}}}:}}:}:}}:}}}}}:}}}}}}}}}}}:}:}}}}}}}:}}}}:}}}:*3<3333333333333<333333333333333$<3333333333333333333333333333333333333333333<33333333}}2[[                 ",
-"               ,4%}}}}}}:}:}}}}}:}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}:}}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}*33333333333<$3333333<3333333333333333<333333333333333333333333333333333333333333333:}%[[                 ",
-"              _-4|}}}:}}}}}}}:}}}:}}}}}}}}}}:}}:}}}:}}}}:}}}:}}:}}}}}:}}}}}}}}}:}}}:}:}}}}}:}}:}}}:}}:}}}:*3<33333333333<33333333<333333$<333333333333333333<33<3333333333333<333333<3333333:}_+[[                ",
-"              ,|4_}}}}}:}}}:}}}}}}}:}:}}:}}}}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}:}}}}}}:}}}}}:}}}}}}}}:}}}}}}:}}}}*333<3333333333333333333333333333333333333<3333333333333333333333333333333333333*}3[[[                ",
-"              --%3}}:}}}:}}}}}:}}}}}}}}}}:}}:}}}:}}}:}}}}}}}}}:}}}}}:}}}}}}:}}}}}}}}:}}}}}:}}:}}}}}}:}}}}}}}}:*33333333333333333333333333<333333333~333333333333333<333<333333333333333333333}}+[[                ",
-"              -4;}}}}}}}}}}}}}}}:}:}}}:}}}}}}}:}}}:}}}:}:}}}:}}}:}}}}}:}}}}}}:}:}}}}}}:}}}}}}}}:}}:}}}}}:}}}}}}}*333333333333333333333333333~33333333333~3333333<33333333333333<33333<3333333:}%[[                ",
-"             ,-44}}:}:}}:}:}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}:}}:}}}}}}}:}:}}}}:}}:}}:$33<333<33333333333<3333333333<33333333333333333333333333333333333333333333:}|[[[               ",
-"             --4,}}}}}}}}}}}}}}:}}}:}}}}:}}}}:}}:}}}:}}}}}}}}}:}}:}}}:}}}}:}:}}}}}}:}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}:*$333333333<3333333333333333333333333<3333333333333<333333333333333333333*}3[[[               ",
-"             ,4%3}}}}:}}}:}}:}}}:}}}}:}}}}}}}}}}}:}}}:}}}:}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}}:}}}}:}}:}}:}}:}}}}}*3333<333333<33333333333333333<33333333333333<333333<3333333333333333333$}:+[[               ",
-"             -4;:}}:}}}:}}}}}}}}}}:}}}}:}}:}:}}}}}}}}}}:}}}}}:}}}}:}}}:}}:}}}}}}:}:}}}:}}}}}}:}}}}}:}}}}}}}}}}}}}:}}}}}$$333333333333333333<33333333333333333333333333333333333<33333333<33333}}^[[               ",
-"            ,-4%}}}}}}}}}:}}:}}}}}}}:}}}}}}}}:}}}:}}}:}}}}:}}}}:}}}:}}}}}}}:}}}}}}}:}}}}}}:}}}}}:}}}}:}}:}}:}:}}}:}}}}}}}*3333333333333333333<3333333333333<33333333333333333333333<3333333333:}%[[               ",
-"            ,|4-}}}}}:}}}}}}}}:}:}}}}}:}}:}}}}}:}}}:}}}}}}}}:}}}}}}}}:}}}}}}}:}:}}}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}}}:$$333333333<33333333333333333333333333333333333<3333333333333333333*}-[[[              ",
-"            --4_}}:}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}:}}:}}}}:}}:}}}}}}}}:}:}}}}}}}}}:}}}:}}}:}}:}}:}}}:}}}}:}}}}}*33333333333333333333333333333333333333333333333333333333333333333*}*+/[              ",
-"            -4%3}}}}:}}:}}}}}:}}}:}}}:}}:}}:}}}}:}}}:}}}}}}:}}}}}}}}:}}}}}}}:}}}:}}}}}}:}}:}}:}}}}}}}}}}}}}}}}}:}}}}:}}}}:}}}}$$33<333333<333333333<333<33333<3333333<3333333333333<33333333333:}+[[              ",
-"            -4%}}:}}}}}}}}:}}}:}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}}:}}:}}}}:}}:}}}:}}}}}}:}}}}}}}}}}:}}}:}:}}}:}:}}}}}}}}}:}}}}}}}}}1$333333333333333<3333333333333333<3333333333<3333333333<3333333:}^[[              ",
-"           -|44}}}}:}}:}}}}}}}}}}}}:}}:}}:}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}:}}}}}:}}}}}}}}:}}}}}}}:}}:}}}}::$33333333333333333333333~33333333333333<333333333333333333333*}4[[              ",
-"           ,44|}}}}}}}}:}}:}}}:}:}}}}}}}}}}}:}:}}:}:}}}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}:}}}:}}:}}}}}}}}:}}}}:$~3333333<333333$<3333333~3333333333333333333333333333333333*}_[[[             ",
-"           -4%_}:}}}:}}}}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}:}}:}}}:}}:}}}:}:}}}:}}}:}}}}}}}}}}}}}:}}:}}:}}}}}}}:$33333333333333333<3333333<3333333333333<333333333<33333333}3[[[             ",
-"           --;$}}:}}}}}}}:}}}}}:}}}}}}}}}:}}}}}}:}}:}:}}}}}}}}}:}}:}}:}}:}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}:}}:}}}}}}}}}}}}}:}}}}}*333333333<333333333333333333333333333333<3333333333<33333:}[[[             ",
-"           |4;}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}:}}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}}:}}}}}}:}}}}:}}}:}:}}:}:}}}:}:}}}}}}}}:}}}:}}}:}}}}:}}}:}$3333333333333333333333333~33<333333333333333333333333331}^[[             ",
-"          ,-44}}}::}}}}}:}}:}:}}}}}}}}:}}}}}}}}}:}}}:}}}:}:}}}}}}:}}:}}:}}}}}}}}:}}:}}}}:}}}:}}}}}}}}}}}}}}}:}}:}}:}}}:}}}:}}}:}}}:}}}}}}$3~333333333333333333333333333<333333333<33333333333333::;[[             ",
-"          -4%-}}:}}}:}}}}}}}}}}:}}:}}}}}:}:}}}:}}}:}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}:}}:*333333~33333<33<333333333333333333333333333<33333333$}-[[[            ",
-"          --%,}}1:}}}}}:}}:}}}}}}}}:}}}}}}}:}}}}}}}}}:}}}}:}:}}}}}}:}}:}}}}}}:}}}}:}}}}}:}}:}}}}}:}:}}:}}}}}}:}}:}}:}}}:}}:}}:}}:}}}}}}}}}}}$33333333333333333<3333333333333<333333<33$333333333$}<+/[            ",
-"          |4%3}:1}}:}}}}}}}}:}:}}}}}}:}:}}}}}}}}:}}}}}}:}}}}}}:}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}:$333333333333333333<33333333333333333333333333<3333}1+[[            ",
-"          -4%1}}*}}}}}:}}:}}}}}:}}}}}}}}}}}:}:}}}:}}:}}}}}}:}}}}}}}}}:}}}}:}}}}}}:}:}}}}}}:}}}:}}}}:}}:}}}}}}}}}}:}}}}}:}}}:}}:}}}}}:}}}}}}:}}}*<33333333333333333333333333333333333333<33333333$1:+/[            ",
-"          |4;}}11}:}}}}}}}}:}}}}}:}:}}}}:}}}}}}}}}}}}}:}}:}}}:}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}}:}}}:}}:}}}}}:}}}}:}}}}}:}}}}}}:}:}}}}}}:$333333333333333333<33<3333333<$33333333333333331}^[[            ",
-"         -444}}11}}}}:}}:}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}}}}}}:}:}}}}}:}}:}}}}:}}}}:}:}}}}:}:}}}}:}}}:}}}:}}}}}}}:}}}}:}}}}}:}}}}}:}:}}}}}}}}:}}}}$333333333333333333333333333333<333333333333333$}%/[            ",
-"         ,44-}}$:}}:}}}}}}:}}:}}:}}}}}}:}}:}}}}:}:}}}:}}}}}:}}}}}}:}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}:}}}}}}}:}}}:}}}}:}}}133333<33333333333333333333333333333333<3333333}-[[[           ",
-"         |4%_}}3}}}}}}}:}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}:}:}}}}}}:}}}}}:}}:}}}}:}}}}:}}}:}}}}}:}:}}}}}}}:}}:}}}:}}:}}:}}}}}}:}}}}}:}}}}}}}}}}:}}}}:}}}:$333333333333333333<333<333333333333333333333}<[[[           ",
-"         -4%$}:3}:}}}:}}}:}}:}}}}}}}}}:}}:}}:}:}}}:}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}:}}}}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}}:}:}}}}:}}}}:}}}$$3333<33333~33333333333333<3333333333<33333::[[[           ",
-"         44;1}:3}}:}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}:}}}}}:}:}}:}}}:}}:}}}:}}:}:}}:}}}}}}}}:}}}}}:}}}:}}:}}}:}}:}}:}}}:}}:}}}}}}}}}}:}}}}}:}}}}}}}}}}}}}:3333333333333333333333333333<33333333333331}+/[           ",
-"         44;}}**}}}}}}}:}}:}}}}}:}}}}:}}:}}:}}}:}}}}}:}:}}}}}}}}}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}:}:}}}}}:}}}}}}:}}:}}:}}:}}:*33~33333333~3333333333333333333333333333*}^[[           ",
-"        ,444}}31}}:}:}}}}}}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}:}}}}:}}}:}}:}}}}}}}:}}:}}}}}}:}}}:}}}}:}}:}}:}}:}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}$3333333<33333333333333333333<3333333333*})[/           ",
-"        -444}}31}}}}}}:}}:}}}}}:}}}}:}}:}}}}}}:}}:}:}}}}:}}}}}}}:}:}}}}}}}}:}}}}}}:}}:}}}}}}}}:}:}}}:}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}:}}}:}}:}}}}}}}}:33<333333333~33333333<33333333333333333}4[[           ",
-"        |4%,}:31}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}}}:}}}}}}}:}}:}}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}}}:}:}}:}}}}}}:}}}}:}}}}}}:}:}:}}}:}$333333<33333<33333333333333333<333333}_[[[          ",
-"        |4%<}13:}:}}}:}}:}}}}}:}}:}}}:}}}}:}:}}:}}}}}}}:}}:}}}}:}}}:}}}}}}}}}:}}}:}}:}}}}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}:}}}}}:}}}}}}}}}}}}}}$33333333333333<$3333333333<333333333:<[[[          ",
-"        44%3}$3}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}}:}}:}:}}}}}}}}}}}:}}}}}}}:}}}:}}}:}}:}}:}}:}}:}}:}}}}}}}:}}:}}}}:}}}}}}}}}}}}}}}}}:}}:}}}}*333333333333333333333333333333<3333:1[/[          ",
-"        44):}33:}}}:}}:}}:}}}:}}}}}}}}}:}}}:}}}}}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}}:}}:}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}:}}}:}}:}}:}}:}:}:}}}}}}}:}}}133333<33333333333<3333333333333333*}[[[          ",
-"        44;}}33}}}}}}}}}}}}}}}}:}}:}:}}}:}}}}:}}:}}:}}}}:}}:}}}}}}}}}}}:}}:}:}}}}}}}}:}}}}}}}}}}:}}}}}:}}:}}:}}:}}:}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:333333333333333333333333333333333*}^[/          ",
-"        4%4}:3$}}:}}:}}:}}}:}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}:}}:}}:}:}}}}}}}}}:}}:}}}}}}:}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}}:}:}}:}}:}}}}:}}:}}}}}:}}:}}}$333333~33<333333<3333333333<333$}^[[          ",
-"       |444}:3$}}}:}}}}}:}}}}}:}}:}}:}}:}}}}:}}:}}:}}}}}:}}}}}}}}}}}}}}:}}}:}}}}}}}:}:}}}}}:}}:}}:}}}}:}}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}$3333333333333333333<3333333333$}4[[          ",
-"       |4%,}13*}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}:}}}}:}}}:}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}:}}}}}}}:}}:}}}}:}}}:}}}:}}}:}}}}}}:}}:}}}}}:}}}:}}}}}*333333333333333333333333333333}4[[          ",
-"       |4%,}$3$:}}}}}}}}}}}}}:}}:}}:}}:}:}}:}}:}}:}:}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}:}}}}:}}}}}}:}}:}}:}}}}}}:}}}}}:}}:}}}}}}:}}}}}}}}:}}}}}}}:}}:}}}}}}}:}}}}:}}}}}:}}}*33333333333<3333$<33333333333}</[[         ",
-"       44;$}331}}:}:}}:}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}:}}}}}}}}:}}}:}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}}}}:}}}}}}}}:}}}}}}}:}}}}}}:}}:}}}}}}}:}}}}}}}:}}}}:}}}}}:}}:3333<33333333333333333333333:_[[[         ",
-"       44;$}331}}}}}}}}}}}}}}:}}:}}:}}}:}}:}}:}}:}}:}:}}}}}}}}}:}}:}:}}}:}}}}}:}}:}}}:}}}}}:}}:}}}}:}}}}:}}:}}}}:}}:}}}}}:}}:}}}}:}:}}}}}}}}}}:}}}}:}}:}}}}}}}}}}:}}}}}::3333333333333333<3333333333::[[[         ",
-"       4%;}:331}}}}}:}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}:}}}:}}}}:}}}}}}}}}}}}}}}}}:}}}}}}}:}}}}}}:}}}:}}}}}}:}}}}}}:}}:}}:}}}}:}}}}}:$33<3333333333333333<333331:[[[         ",
-"       44)}:33*:}:}}}}:}}}}}}}}:}}:}}}}:}}:}}:}}:}}}:}}}}}}:}}}}}:}}}:}}}}}:}}:}}:}}}}}}:}}}}}}}}:}}}}}}:}}:}}:}}:}}:}}}}}}:}}}}}}}:}}}:}}}:}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}}$333333<333333333333333331:2[/         ",
-"       4%4}1331}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}:}}}:}}}:}}}}}}}}}}:}:}}}}}}:}:}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}}}}}}:}}}}:}}:}}:}}:}}:}}}}}:}}}33333333333333<333333333*}([[         ",
-"      |4%4}*331}:}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}:}}}}}}}}:}}}}}}}:}}}}}}}:}}}:}}:}}:}}:}}}}}}}}:}}}}}:}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}$3333333333333333<33333$}^[[         ",
-"      |4%-}*331}}}:}}:}:}}:}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}:}}}}:}}}:}:}}:}:}}}}}}}}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}}}}}}}:}:}}}}}}}:}}}}:}}}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}}:}$3333<$<33333<333333333}%[[         ",
-"      |%%,}*331}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}:}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}:}:}:}}}}}:}}}:}}:}}}:}}}}}}}:}}:}}:}}}}}}}}:}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}$333$3333333$333333333}4[/         ",
-"      |%%,}$33*}:}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}:}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}:}:}}}}}}:}}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}}:}}}}}}}$$$333333<$3333<33333},[/[        ",
-"      44;$:3331}}}}}}:}}}}}}}:}}:}}:}:}}:}}:}}}:}}}}}}}}:}:}}:}}:}:}:}}}}:}:}:}}}}}}}}}:}}:}}:}}}}:}}}}:}}:}}:}}:}}}}}:}:}:}}}}}}}}:}}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}:}:}:}}}$3333333333333333333}<[[[        ",
-"      4;;$}3331}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}:}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}:}}:}}}}}}}:}}:}}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}:}}}}:}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}}}}}}}:}}$$33333333333333333:<[[[        ",
-"      44)*1333*}}}}}:}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}:}:}}}}:}}}}}}}}}:}}}:}}}}}}}:}}}}}}:}}:}}:}}}}:}}}:}}}}:}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}*<3333<33333333333:1[/[        ",
-"      4%;}:333*}:}}}}}:}}}}:}:}}}}}}}}}:}}:}}}}:}}:}}:}}:}}}}}}:}:}}}}}}:}}}:}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}}}}}:}}}}:}}}:}}}}}:}}}}}:}}:}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}:}:}}}}}}:}}$33333333333<3333::+[/        ",
-"      %%)}:3331}}}}:}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}:}}}}}:}:}}:}}:}}}}}}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}$$33333333333333:}[[[        ",
-"      4%;}1333*}}:}}}:}}:}}}}}:}}}}}}}:}}:}}}}:}}:}}:}}:}}:}}}:}}}:}}}}:}}:}}}}}:}:}:}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}:}}:}}}:}}:}}:}}:}}:}}}}:}}:}}}}}}}}:}}}}}*$$<$<3<3333333:}+[[        ",
-"      %%4}*3331}}}}}}}}}}:}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}:}:}}}}:}}}}:}}:}}:}}}}}}:}}}}}}}}:}:}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}:}}:}}}$$$3$$$33333331}^[/        ",
-"      %%4}1333*}}}:}}}:}}}}}}:}}:}}}}:}}:}}:}:}}:}}:}}:}}}}:}}}}}:}}:}}}}}}:}:}}}}}}:}:}:}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}:}}}:}}}}}:}}:}}:}}}}:}}}}}}:}}:}}:}}:}}:}}:}}}}:}}}}}}}}}}}}}}:}$333333<33333*:^[[        ",
-"     |4%4}*3333:}}}:}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}:}}}}}}:}:}}}}}}}:}}}}}}}}}}:}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}:}}:}}:}}:}}}:}:3333333333331}^[/        ",
-"     4%%-}$333*}}}}}}}}}}}}}:}}}}}}}:}}:}}:}}}:}}:}}:}}}}}:}}:}:}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}}:}:}:}:}:}}:}:}}:}}}:}}:}}}}}}}}}}:}}:}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}3333<$33333*}4[[        ",
-"     |%%,}$333*:}}:}:}:}}:}}}}:}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}:}}:}:}:}}:}}}:}:}}:}}}:}}}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}:}}:}}}}}}}}}}}}}}}}}:}:}}}}}}}}:}:}}:}}}}}:}:333$<3333$*:4[/        ",
-"     4%;,}$333$}}}}}}}}}}}}:}}}}}}}:}}:}}}}}}:}}:}}:}}}}}:}}:}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}}}}}}}}:}}:}}:}}:}}:}}}}}}}}}:}:}}}}}}}}}:}:}}}::$$33333331}4[/        ",
-"     |%%,}$3333:}}}}}:}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}:}}}}}}:}}}}:}}}:}}}}}}:}}}}}}:}}}:}}:}}}}}}}}}}}}:}}:}}}}}:}}:}:}:}}}}}}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}:333333331:4[[        ",
-"     4;;<}$3333}}:}:}}}}}}:}}:}}}}:}}}}}}:}:}}:}}:}}:}}}:}}}}}}}}}}}:}}}:}:}}}}:}}:}}}}}}}}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}:}}:}}:}}}}:}}}}}}}}}}:}}:}}:}}:}}:}}:}}}:}:}:}}}}}}:}}}}:}}:}}}}}}*$333333:}-[/        ",
-"     4%;$}$3333:}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}}}}}}}}}:}}:}}:}}}}}}}}}:}}:}}:}}}}}:}}:}}}:}}}}}}}}}}:}}}:}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}:}}}}*$<3333*}_[[[       ",
-"     %%)3}33333:}}}}}:}}}:}}}}}}}}}}}:}:}}:}}:}}:}}}}:}}}}}}:}}}}}}:}}:}}}:}:}}}:}}}}}}}}}}}:}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}:}}:}}}}}}}}}:}}}}}}:}}:}}:}}:}}:}}}}}}:}}}}}}}}:}}:}}:}}:}}:}}:}}}}133333:}<[[[       ",
-"     4;;$:333331:}:}}}}}}}:}:}}:}}}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}:}}}}}}:}}}}}:}}}:}}:}}}:}}}}}}}}:}}}:}}:}}}}}}:}}}:}:}}}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}$33331}<[/[       ",
-"     4;)$}3$333*}}}}}}}:}}}}}}}}}:}:}}:}}:}}:}}:}}}}}}}}}}}:}}:}}}:}}}}}}}:}}}}}}}}}}}:}}}}}:}}}:}}}}}}}}}:}:}}}}:}}}}}}}}:}}}:}}:}}}}:}}}}}}:}}:}}:}}:}}:}}:}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}:}}}}}*333:}_[[[       ",
-"     %%;$:333$3$}}:}:}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}:}}:}}}}}}:}}:}:}}}}:}}}:}}}}:}:}}:}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}:}}:}}}:}}}}}}}}}:}}}}}:}}}}:}}}}:$*}}<[[/       ",
-"     %%^}:$3333*}}}}}}}}}}}}}}}}:}}}:}}:}}:}}:}}:}}}}:}}}}:}}}}}:}}}}}}}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}:}:}:}}:}:}}}}}}}}}:}}}}}:}}}}}}}:}}:}}:}}:}}}:}}}:}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}:}}:}}}}3[[[       ",
-"     4%)}:$<3333}:}}}:}:}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}:}}}:}}}}}}}}}}}}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}}:}:}}:}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}:}}}}}}:}:}}}}}}}:}}}}}:}}}}:}}}:}:}}}}}}}}}}:[/[       ",
-"     %;^}}333333}}}:}}}}}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}}}}}}}}}}}}}:}:}:}}}}:}:}}}}:}}}}}}}}}}}:}}:}:}}}}}}}}}}}:}}}}:}}}}}}}}:}}:}:}}:}}}}}}:}}:}}}}:}}}}}}}:}}:}}}}}:}}:}}}}}:}}}}}}}}}:}}}}}:}:}}:}}}:+[[       ",
-"     %%)}}3333331}}}}}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}:}}}}:}}}}:}}:}}}:}}}}}}}}}}}:}}:}:}}}}:}}}}}}}}:}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}:}:}}}}}}}}}}}}}}}}:}}:[[/       ",
-"     %%)}}$$33331}}}:}}}}}}}:}}}:}:}}:}}:}}:}}:}}:}}}}:}}}:}:}}}:}}}}}:}}}}}}}}}:}}}}}}}:}}}}:}}:}}}:}}}}}}}}:}}}}:}}:}}}}}:}}:}}}:}}}}}}}}:}}}:}}}}}:}}}}}}}:}}:}:}:}}}}}:}}}:}}}}}}:}}:}:}}}}}:}}}}}}:[[[       ",
-"     ;%^}:333333*:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}:}}}}}}}:}}}}}}}}:}}}}:}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}:}}}}}}:}}}}:}}:}}}}:}}}}}:}}}}}:}:}}}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}:}:}}}}}}:}}:[[/       ",
-"     %;^}}$33333*}}:}}:}}}}:}}:}}}}:}:}:}}:}}:}}}}}}}:}}:}}}}}}}}}}}}:}:}}}}}:}:}}}:}}}}}}}}:}}}:}:}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}:}}}}}}}}}}}}}:}}}}}}:}:}}}}}}}}:}}:}}}}}:[[[       ",
-"     %;)}}*333$33}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}:}:}}}}}}:}}:}}}}}}}}}:}}:}}}}:}}}}}}}}}}}}:}:}}:}}:}}:}}:}}}}}}}}:}}}:}}}}}}}}}}}}:}}}}}:}}}}}}:}:}}:}}:}}}}}}}:}:}}}}}:}}}}}}}}}}}}:}}:[[/       ",
-"     %;)}}$33<$33:}}:}}}}}:}}:}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}:}}}}}}:}}}}}}}}}:}}:}}}}}}}}}}:}}}}:}}}:}}}:}}}}}}}}}}}:}}}}}:}}:}:}}}:}}}:}}:}:}}:}}}}}:}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}:}:}}}:}}}:}}}}:[[[       ",
-"     ;;^}:3$3$33$*}}}:}}}}}}}}}}}:}:}:}}}}}}}}:}}:}}}}:}}:}}}:}}}}}}}:}}}:}}}}}}}}}:}}:}}}}}:}}}}}}}}}}}}}}}}}:}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}:}:}:}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}}}}:}}}}}}}:[[/       ",
-"     ;%^}}133333$*}}}}}:}:}}:}}:}}}}}}}:}}:}}}}}}}}:}}}}}}}}}}:}:}}}}}}:}}}:}}:}}}:}}}}}:}}}}}:}}:}}:}}:}}:}:}}}}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}:}}}}:}}}}}}}}}:}}}}}:}}:}}:}}}:}}}}}}:}}}}}:}}}}}}}}:}}:[[[       ",
-"     ;;)}}*3333333}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}:}}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}:}}}}}:}}}:}}:}:}}}}}:[[/       ",
-"     %)^}}13333333:}:}:}}}:}}:}}}:}}}}:}}:}}}}}}}}:}}:}}}}}}}}}}}:}}}:}}:}}:}}:}}}:}}}}}}}}:}}}}}:}}}:}}:}}}}:}}:}}}}}}}}:}}:}}:}}}:}}}}}}}}}}:}}:}}:}}}:}:}}}:}}}}:}}}:}}}}}}:}}}}}}:}}}}}}}:}}}}}:}}}:+[/       ",
-"     ;;^}:1333333$:}}}}:}}}}}}:}}}}}}}}}}}}}:}}:}}}}}}}:}}:}:}:}}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}:}}}}}}}:}}:}}}}}}}}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}:}}}}}}}}:}}}:}}:}}}:}}:}}}}}}:}}}}}}:}}}:}}*[/[       ",
-"     ;)^1}:3333333*}}}}}}:}}}}}}:}}:}:}}:}}}}}}}}:}}}}}}}}}}}}}}}:}}}:}}:}:}:}}}}}}:}}}}:}}}}:}}}}}}:}}}:}}}:}}}:}}}}}}:}}:}}:}}}}}:}}}}}}}}}:}}:}}}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}}:}:}}}}:}}}}}}}}}}}<+/[       ",
-"     ;;^3}:<3333333:}}}}}}}:}}}}}}}}}}}}}}}:}}:}}}}:}}:}}:}}}}}:}}}:}}}}}}}}}}}:}}}}}:}}}}}}}}}:}}}}}:}}}}}}}:}}}}}}:}}}}}}}}}}}:}}}}}:}}}:}}}}}}}:}}}:}:}}}:}}}:}}}}:}}}:}}:}}}}:}}}}}}}:}}}:}}:}}}:}}_[[/       ",
-"     ;))$}}33<3333$}:}:}}}}}}:}:}}:}}}:}}:}}}}}}:}}}}}}}}}}:}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}:}}}}}:}}}}}}}:}}}}}:}}:}}}}:}}}:}}:}}}}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}:}}}}<[[/       ",
-"     );^$:}333333$$1}}}:}}:}}}}}}}}:}}}}}}}}}:}}}}}}}:}}:}}}}:}}}:}}}}}}:}}}}:}}}}}}:}}}}}}}}:}}}}:}}}:}}}:}}}}}}}}:}}}}:}}}}}}}}:}}:}}}}}:}}}:}}:}:}}:}}}}}}}:}}:}:}}}}}}:}}}}:}}:}:}:}}:}}:}}:}}}}:}}-[/[       ",
-"     ;)^,}}333333333}}}}}}}}:}}}:}}}}:}}}}:}}}}:}}:}}}}}}}}}}}}:}}}:}}:}}}:}}}}}}:}}}}:}}:}}}}}:}}}}}}}}}}}}}:}}:}}}}}:}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:4[/        ",
-"     %^^-:}$3333333$:}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}:}}:}:}:}}}}}}}}}}}}}}}}}}:}}}:}}}}}}}:}:}}}}}:}}:}:}}:}}}}}}}}}}}}}}:}:}}}}}}:}}}}:}}}:}}:}}:}}}}}:}}}}:}}}:}}}}}}:}}:}}}}}:}}}}}:}}:}}:}}}:}}}:}}4[[        ",
-"     ;)^4}}*333333331}}}}}}}}}}}}}:}}}}}}:}}:}:}}}}}}}}}}}}}}:}}:}}:}}}:}}:}}}}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}:}}:}}:}}}:}}}}}}:}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}:}}}}}}}:}}}:}}}:}}}:(//        ",
-"     ;^^%}}*33333$<3*}:}}:}}}:}:}}}:}}:}}}}}}}}:}:}}:}}:}}}}}}}}}}}}}:}}}}}}:}}}}}}:}}}:}}}}:}}}}}:}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}}:}:}}:}}:}}:}:}}}}}}}:}}}:}}:}:}:}:}}}}}:}}}}}}}}}}}}}}}:^[[        ",
-"      ^^^}}:3333<3333}}}}}}:}}}}}}}}}}}}:}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}:}}}}}}:}}}}}}}}}}:}}}}:}}}}}}:}}}:}}}:}:}}:}}:}}:}:}}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}:}}}:}}}}:}:+//        ",
-"      ^^^}}:3333$333$1}}:}}}}}}:}}:}}:}}}}}}}}}}}:}}}:}}}}:}}}}}}}}:}}}}:}}:}}}}:}}:}}:}}}}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}:}}}}}:}:}}:}}}}}}}}}}}:}}:}:}}}}}}}}}}}}}}:}}}:}}}}:}}}}*[[[        ",
-"      )^2*}:33333$3333}}}}}}}:}}}}}}}}}:}}:}}}:}}}}:}}:}}}}}:}}:}:}}}:}}}}}}}}:}}}}}}}}}}:}:}}}:}}}}}:}}}}}}:}}:}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}}:}}}}}}}}}}:}}}:}}}:}}}}}}}:}:}:}}:}:}:}}}}}}}}:}}}}}}}_[//        ",
-"      )^^<}}$333333333:}:}:}}}}}}:}}:}}}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}:}}:}}:}}}}}:}}}}}}}}}:}:}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}}}:}}}}}}}:}}}:}}}}:}}}:}}}}}}:}}}}}}}}}:}}}}}}}}:}}:}}}}}}:}:}-[/[        ",
-"      )2^-}}$333333333*}}}}}}}}:}}}}}}:}}}}}}:}}:}:}}}}}}:}}:}}}}}:}}:}}}}}:}}}}}}}}}}}}}}:}}}:}:}:}}}}}}}:}}:}}:}}:}}}}}:}}:}}}}}}}}:}}}}}:}}:}}}}:}}}:}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}:}}}}:%[/         ",
-"      ;2^%:}*333333333$:}}:}:}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}}}}}:}}}}}}}}:}}}}:}}:}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}:}}}:}}}}:}}}}}}}}}:}:}}}}:}}:}}}}:}:}}}:}}:}:}}:}}:}}}}}}}}}}:^//         ",
-"      )22^}}:33333333331}}}}}}}}}:}}}}}}}}:}:}}:}}}:}}}}}:}}:}}}}:}:}}:}}}}:}}}}}}}}}}}}:}}}}}}:}}:}:}}}}}:}:}}:}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}:}}1[[/         ",
-"       ^22:}}3333333333$}:}}:}:}}}}}:}}:}}}}}}}}:}}}}}:}:}}}}:}}}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}}:}}}}}}}}}:}:}}}}:}}:}}}}}}}}}}:}}:}}}}:}}}:}}:}}}:}:}}}}}3[//         ",
-"       ^223}}33333333333:}}}}}}}}}:}}}}}}:}}}:}}}}}}}}}}}}}}}}}:}}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}}:}}}}:}}}}}:}}}}}}:}}:}}:}}:}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}:}}}}}}:}:}}}:}}}}}}}:}}}:}}}}}}}}}}}}}:}}:,[[/         ",
-"       (22-}:*3<33333333*:}}}:}:}}}}}}:}}}:}}}}}}:}:}}}}}}:}}}}}:}}}}:}}}:}}}}:}}}:}}}}}}}:}}:}}}:}}}}}}:}}}:}}:}}}}}:}}}}}}}}:}}:}}:}:}}}}}}}}}}}:}:}}:}}}}}:}}}}}}}:}}}}:}:}}}}}}}}}:}}}:}}}:}}}}}})[/          ",
-"       ^22;}}13333333333$:}:}}}}}}}:}}}}}}}}}}:}}}}}}:}:}}}:}}}}}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}}:}}:}}}}}}}}}}}}}}:}}:}:}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}}}}:}}:}}}:}}}}}}}:}}::2//          ",
-"        222}}}333<3333333$}}}}:}:}}}}}:}}}}:}}}}}:}}}}}}}}}}}}:}}}}}}:}}}:}}:}}}}}}}}}}}}:}}}:}:}}}}}}}}}:}}:}}:}}}}}:}}}}}}}}}}:}}:}}}:}}}}}}}}}}}}}}}:}}}:}}}}}}}}}}}:}}}}}:}:}}}}}}}}}}:}}:}}}}}}3[[/          ",
-"        22+$}:333$<3333333:}}}}}}}}}:}}}:}}}}:}}}}:}}}}:}}:}:}}}:}}}}}}:}}}}}}}:}}:}}:}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}}}:}}:}}:}}}}}}}:}}}:}:}}}}:}:}:}}}}:}}}}}:}}:}:}}}:}:}}}}}}:}}}:}}}}}}}}}:}}}}-//[          ",
-"        222-}}*333$3333333$:}}}:}:}}}}}}}}:}}}}:}}}}:}}}:}}}}}}}}}}:}}}}}:}}:}}}}}}}}}}:}}}}}}}:}:}}}}:}}:}}:}}:}}}}}}}}}}}}}}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}:}}}:}}:;[/           ",
-"        (+2;}}:333<$33333331}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}:}:}}}}:}}}}}}}}}}:}}:}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}}}}}}}}}:}:}}}}}}:}}}}}}:}}:}}}}}}:}}}:}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}12//           ",
-"         2++:}:33$$<33333333}}}}}:}:}}}}}:}:}:}}:}:}}:}}}}:}}}}}}:}}}}}:}}:}}}}:}}}}}:}}}}:}}}}}}}}}:}}}:}}:}}:}}}}}}}}}}}}}:}}:}}:}}}}}:}}}}}}}:}:}}}}}}}:}}}}}:}}}}}}:}}}}}}}:}}:}}}:}}:}}:}}}:}}<[//           ",
-"         22+<}}$3$33333333331}}:}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}}}:}}}}}:}}}}}}}}}}:}:}}}}}}:}}}}}}}}}:}}:}}:}}}:}}}}}}}}}}}}}}}:}}:}}}}}}}:}}:}}}:}}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}}:}}}}%[/[           ",
-"         2++%}}*3333333333333:}}}}:}}}:}}}}}}:}}}}}:}}}}:}}:}}}}:}}}}:}}:}}}}}}:}}}:}}}:}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}:}}}:}}}:}}:}}}:}}}}}}}}}}}:}}}}}}}}}}}:}}:}:}:}}}}}}}}}:}:}}}}}}:}}:}}}}}}:2[/            ",
-"         (+22:}:33333333333333}}}}}}}}}}:}:}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}:}}}:}:}}}:}}}:}}:}}}}:}}}}:}}:}}}}}}}}}:}}}}}}:}}}}:}}}:}}:}}}}:}}:}}}:}}}}}}}}}}}}:}}:}}}}}}}}}:}}}}}}}}:}}$[//            ",
-"          +++<}}33333<3333333$1:}}:}}}}}}}}}}:}}:}}:}:}}:}:}}}}}}:}:}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}}:}}}}}}}:}}}}}}}}:}}}}}:}}}}}}}:}}}}}}:}}}}}}:}}:}:}}}}}}:}:}}}:}4[/[            ",
-"          (+2%}}*3333$<33333333:}}}}:}:}}:}}}}}}}}}}}}}}}}}}}:}:}}}}}:}}}:}}}}}}}}}}}:}}}}}}}}}:}}:}}:}}:}}:}}}}:}}:}}:}}}:}}}:}}}}}:}}:}}}:}:}}}}}}}:}}}}}}}:}}}}:}:}}}}}:}}}}}}}}}}}}}:}}}}}}}}:2//             ",
-"          2[+2:}:333333$<333333*}:}}}}}}}}}:}}}}:}}}}:}}}}:}}}}}}}}}}}}}}}}}:}}:}}:}}}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}:}}}:}}}:}}}}:}}}}}}}:}}}}}}}}:}}:}:}}}}}}:}}}}3[//             ",
-"           +++_}}333333$$33333331}}:}}}:}}}}}}:}}}:}}}:}}}}}}:}}}:}}}:}}}:}}}}}}}}}}}:}}}}}:}:}}}:}}:}:}}:}}}}}}:}}:}}:}}}}}}}:}}}}:}:}}}:}}}}}}}}}}}}}}:}}}}:}}}}}:}}}}}}}:}:}}}}}}}}}}}}:}}}:}};[/[             ",
-"           2++;}}*3333$<3$<333333:}}:}}}:}}:}}}}}}}}}}}}:}:}}}}}}:}}}:}}}:}}}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}}}:}}:}}}:}}}}}}}}}}:}}:}}:}}}:}}}}}}}}}}}:}}}}:}}:}}}}}}:}}:}}:}:}}}}}}}}:+[/              ",
-"           (+++*}:$333333$33333333}}}}}}}}}}}}}:}}:}}}}}}}}}:}:}}}}}}}}}}}}:}}}}}}}}}}:}:}}}}}}}:}}:}}}:}}:}}}}:}}:}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}}:}}}}:}}:}}:}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}:}}},[//              ",
-"            +++|}}*<333333333333333}:}}}:}}:}:}}}}}}}:}}}:}}}}}}}}:}}}:}}}}}}}:}}}:}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}:}}}}}:}}}:}}}}:}}}}:}}:}}}:}}}}:}}}}}}:}}}}}:}}}}:}}}}}}:}}:}}:}}}}:}:}}}}}:)[//              ",
-"            ([+2}}:$3<$3333<3333333*}}:}}}}}}}}:}}:}}}}:}}}}}}:}}}}}:}}}:}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}:}}:}}:}}}:}}}}}:}}}:}}}}}}}}}:}}}}}}:}}}}}}}}}:}}}}}}:}}}}}}}}:}}}:}}}}}}}}}:}}}}}}:}}}3[/[               ",
-"             +[+_}}$$$<33333333333331}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}:}:}}}:}}}}}:}}:}}}}}}}}}:}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}:}}:}}}}}}}:}}}}:}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}:%[//               ",
-"             2++(}}*$$3333333333333331}:}:}:}}}:}}}}}:}}}}}}:}}}}}}:}}:}}:}}:}:}}}:}}}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}}}:}}:}:}}}}:}}}:}}}:}}:}}}:}}}:}}:}}}}}}}}}}:}}}:}}:}:}}}}}}:}}:}}}:}}}1[[/                ",
-"             ++[+$}}3333333333<3333333:}}}}}:}}}}:}}}}}:}:}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}:}}:}}}}:}}}}}}}:}}:}}:}}}}}}}}:}}}}:}}}}}}}}}}:}}}}}}}}}}}}}:}}:}}}}:}}}}}}}}}}}:}}}}}}}}}}}}:-[//                ",
-"              2[+%:}*3333333333333333331}}}}}}}}}}}:}}}}}}}:}}:}}}}:}}:}}:}}}}}}}}:}}:}}}}}}}:}}}:}}}}}}}:}}:}}}}}}}:}}}:}}}}}}}:}}}}}:}:}}}}}}}}}:}}:}}}:}}}}}}}:}}}}}:}}:}}}:}}}:}}}}:}:}}}1+[//                ",
-"              2+[+*}}3333333333333333333*}}}}:}:}}}}}}}}:}}}}}}}:}}}}}}}}}:}}:}}}}}}}}:}}:}}}}}}}}}:}}:}}}}}}:}}:}}}}:}}}}:}}:}}}}}}}}}}}}}:}}}:}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}}}}}}}:}}}}}:}:,[/[                 ",
-"               +[+%:}*3333<333333<33333331}}}}}}}:}}:}}}}}:}}}}}}}}:}}:}}}}}}}}:}}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}:}}}}:}}}}}}}}:}:}:}}}:}}}}:}}}}:}}:}}}}}:}}}:}}}}}}}:}:}}:}}:}:}}}}}}}}}}:+[//                 ",
-"               2+++*}:33333333333333333333*}}:}}}}}}}}:}}}}}:}}:}}}}}}}:}}}}:}}}}}}}}:}:}}:}}}:}:}}:}}:}}}}:}}}:}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}}:}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}:}:}}}}}-[//                  ",
-"                +[+;}}*333333333333333333331}}}:}:}}:}}}:}}}}}}}}}:}}}}}}:}}}}:}:}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}}}}}}}:}:}}}}}}}}}}}}}}}:}}}}}:}}:}}}:}:}}}}:}}:}}}}:}}}}}:}::+[//                  ",
-"                ([++*}:333<33333333333333333$}}}}}}}}}}}}}}:}}:}}}}:}:}}}}:}}}}}}}}}}}:}}:}}:}}}:}}:}}:}}:}}}}}:}}}}}}}:}}:}}:}:}:}}}}}}}}:}}:}}}:}}}}}:}}:}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}-[//                   ",
-"                 +[+%}}*3333333333<33333333333}}}:}}}:}:}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}}}:}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}:}}}:}}}:}}}}}}}:}}:}}}}}}}}}:}}}}}}}}}}}}}:}}:+[//                   ",
-"                 ([+[3:}33333<333333333333333331}}:}}}}}:}}:}}:}}}}}}}}}}}:}}}}}:}}}}}}:}}}}}}}}}:}}:}}:}}}}:}}:}}}}:}}:}}:}}}}}}}:}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}:}:}:}}}}:}}:}}:}}:}}}}:4[//                    ",
-"                  +[+)}::333333333333<33333333331}}}}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}:}}}:}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}:}:}:}}}}:}}}}:}}:}}}:}}}:}}}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}*+//[                    ",
-"                  ++[+,}}$3333<333333333333333333*::}:}}}:}}:}}:}}}}}}:}}:}}}}}:}}:}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}:}}:}}:}:}}}}}}}}:}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}:}}:}}:}}:}:}}:%[/[                     ",
-"                   +[+21}:$333333333333<3333333333$1}}}}}}}}}}}}}:}}}}}}}}}:}}}}}:}}}:}}}:}}}:}}:}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}:}:}}}:}}}}:}}}:}:}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}<[//                      ",
-"                    +[[|}}*33333<333333333<333333333$:}:}}:}}:}}}}:}:}}:}}}}}:}}}}}}}:}}}}:}}}}}}:}}}:}}}}}:}}:}}}}:}}:}}:}}}:}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}:}}:}}:}}:}}:}}}}:}:([/[                      ",
-"                    2[[+3}}$333333333333333333333333331}}}}}}}}}:}}}}}}}}:}}:}}}}}:}}}}:}}}}:}}:}}}:}}}}:}}}}}}}:}}}}}}}}}}}}}}}}:}:}}}}}}}:}}:}}}}:}}}}:}}:}}}}}:}}}}}}}}}}}}}}}}:}}}}-[//                       ",
-"                     +[+(:}13333333333333333333333333333*:}}:}}}}}}}}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}:}:}}}}}:}}}}}}}}:}}}:}}}}}}}:}}}}:}}}}}}:}}:}}}:}}:}}:}}:}}:}}}}:}$+///                       ",
-"                     2[[+-}}*33333333333333333<3333333333*:}}}}:}}:}:}}}}}:}}:}}}}:}}:}}}}}:}}}}:}}}}}:}}:}}}}:}}:}}}}}:}:}}}:}:}}}}}}}}}}:}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:^[/[                        ",
-"                      +[[+3}}$333<3333333333333333333333333$:}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}:}}}}:}}}}}:}:}}}}:}:}}}}:}}:}}:}}:}}:}}:}}}}}:,[//                         ",
-"                       +[+(}}}3333333333<33333333333333333333$1}:}}}}:}}}}}}}:}:}:}}}}:}}}}:}}}}:}}:}}:}}:}}:}}:}}:}}}:}}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}*+[//                         ",
-"                       ([[[|:}133333<33333333333<33333333333333$1}:}}}}}:}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}:}}:}:}}}:}:}}}}}:}}:}}:}}:}}:}}:}}:}:}::^[//                          ",
-"                        +[[[3:}*333333333<333333333333333333333333*:}}:}}}}}}}}}}:}}}}:}:}}}}}}:}}:}}:}}:}}:}}:}}}}}}:}}:}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}4[//                           ",
-"                         +[[(:}}$33333333333333333<33<3333333333$3$3$1:}}}:}:}:}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}}:}:}}}}}:}}:}}}:}}}:}:}}}}}:}}}}}:}}}}}}}:}}:}}:}}}:3+//[                           ",
-"                         ++[[)}:}333333333333<333333333333333333<$33333$*}}}}}}}}}:}:}}}}}}}}}:}}:}}:}}:}}:}}}}}}}}}}}}}}:}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}:}$2///                            ",
-"                          ([[[|}:}<333333333333333333333<3333333333333$$33$*::}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}:}}:}:}}:}:}}}}}:}}}:}}}}}}:}}}}}}}}}}}}:}:}}:}}}}}}}:}}}}}}}:}}:}}}:;//[                             ",
-"                           +[+[<}}:333333333333333333333333333333333333333333$$*1}}}}}}}}}}}}:}}:}}:}}:}}}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}:}}}:}}:}}}}}}}}}}:}:}}}}}:}}:}}}}}}}}}|[///                             ",
-"                            +[[+3}}1333333333333333333333333333333333333333333333$$*::}:}}:}}}}}}}}}}}}}:}}:}}:}}:}:}}}}}}}:}}}}}:}}}:}}}}}}}}}}}:}:}}}:}}}}}}}}:}}}}}}}}:}}}:}_[///                              ",
-"                             [+[(::}*3333333333333333333333333333333333333333333333$33$$**:}}:}}:}}:}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}:}}:}}}}}}}:}}}}}:}}:}}}}:}}:}}}}}:}}$+[//                               ",
-"                             ([[[(}}}*33333333333333333333<3333<3333333333333333333333$$$3333$$***:*:}:}}:}}:}}:}}:}}}}}}}}:}}:}}:}}}}:}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}32///                                ",
-"                              +[[+;:}}*33<333<3333<333333333333333<333333333333333333333$3333333$$$$33333$**::}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}:}}}:}}}}}}:}}:}:}}:}}:}}}}}:^[/[                                 ",
-"                               +[[[;}}}13333333333333<333333333333333333333333~333333333333333333333~333$$$$$$$$$:}1}}}}}}}}:}}:}}:}}:}}}}:}:}:}}:}}}}}}:}}}}}}}}}}}}}}}}}:1;////                                 ",
-"                                +[[+|}}}13333333333333333333<33333333<33333333333333333333333333333333333333333$$$$$*}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}}:}}:}}}:}:%[/[/                                  ",
-"                                 +[[[,:}}:333<3333333333<33333333333333333333333~333~33333~333333333333333333333$$3$$$*:}:}}:}}:}}:}}:}}}}}}}}:}}}}:}}:}}}}}:}:}}}}}}:}}}:-[///                                   ",
-"                                  [[[[,}:}:$3333<33333333333333<33~3333333<33<333333333333333~33333333333333333333333333*:}:}}}}}}}}}}}}}}:}}}}}:}}}}}}}:}}}}}}}:}}}}}}}:|[//[                                    ",
-"                                   +[[[,}}:}$333333<333333333333333333<3333333333333<33333333333333<33~333~3333333333333$$$*}}:}:}}:}}:}}}}}:}}}}:}}}}}}}}}}}:}}}:}}}:}:-[/[/                                     ",
-"                                    [[[+|}}}}*$3333333~333333333333333333333333333333333<33333333333333333333333333333333$<$*}}}}}}}}}}}:}}}}}:}}}}:}:}}:}:}}}}}}}}:}}:-[[//                                      ",
-"                                     [[[+|:}}}*33333333333~33333333333333333333<3333333333333333333333<3333<333333333333$$$$$$*}}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}:-[///                                       ",
-"                                      [[[[%}}}}:$3333333<3333333<33333333333333333333333333<333333333333333333<3333333333<3$3$3$}}}}}}:}}}}}:}}:}}:}}:}}:}}:}}}}:}}::4[///                                        ",
-"                                       +[[[;:}:}}*33<3333333333333333~3333333<3333333333333333333333333333333333333333333$$$333$3}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}:}:;[///                                         ",
-"                                        [[/[(*}}}::33333333333333333333333333333333333<3333333<333333333333333333~333333333<$$333$}}}:}:}}}}:}}:}}}:}:}}:}}}}}}}}:1)[/[/                                          ",
-"                                         +[[[(3}}}}}*3333333333333333333333333333<33333333333333333333333333~3333333<33333$<$<$333$:}}}}}:}}}}}}}:}}}}}}}}:}}}:}}*2[///                                           ",
-"                                          [[[[+<:}:}}:33333<3333<333333<33333333333333333333333333<33333333333<33333333333333333333$}}}}}}}:}:}}}}}}}}:}}}}}:}}:<+[//[                                            ",
-"                                           +[[[[|:}}}:}$33333333333333333333333333333333<333~333333333333<3333333<3333333333333333331:}:}}}}}}:}}}}:}}}}}:}}}}:-+////                                             ",
-"                                            +/[/[)*}}}}}:$33333333<333333~3333333~3333333333333<33333<3333333333333333333333333333333}}}}:}}}}}}:}}}}}:}}}}:}1%[/[/                                               ",
-"                                              [[[[+<:}}}}}13333333333333<333<333333~333333333333333333333333333333333333<333333333333*:}}}}:}}}}}}}}:}}}}:}}3([///                                                ",
-"                                               [[[[[|:}}}}}:*3333333~33333333333333<3333<3333333333333333333333333<33333333333<3333333:}}}}}}:}}:}}}}}:}}}1,+//[/                                                 ",
-"                                                [/[[[(3:}}}}}}*3333333333333333333333333333<333333~3333333333333333333333333333333333$1}}:}}}}}}}}:}}}}}:*;[////                                                  ",
-"                                                  [//[[|:}}}:}}}$333333333333<333333333333333~3333333<33333333333333333333<33333333333$}}}:}:}:}}}}:}:}:_+[/[/                                                    ",
-"                                                   +/[[/(~:}}}}}}}*$3333333333333333<3333333333<33333333<333<333333<3333333333<3333333$}}}}}}}}}}}}}:}*%[[///                                                     ",
-"                                                     [/[/[;*}}:}:}}}:$$333333333333333333333333333333333333333333333333333333333333333$}}:}}}}}:}}}}:,[[//[                                                       ",
-"                                                      [[/[[+=:}}}}}}}}:*3333333~333333333<3333333<333333333333333333333333333333333333$}}}}}:}}}}::3([[///                                                        ",
-"                                                        [[/[[(|:}}}}:}}}::$$333<3333~33333333333333333333~333<333333<333333333333333331}}:}}}}:}}*)[[///                                                          ",
-"                                                         [[//[[(|::}}}}}}}}::$3333333~33333<3333333333<333333333333333<333333333<33333}:}}}}}}:*%[[////                                                           ",
-"                                                           [/[/[[(|}::}}}:}}}}}1$33333333333333333~3333333333333333333333<33333333333*}}}:}:}$4[[////                                                             ",
-"                                                             [/[/[/(|*:}}}}}}}}}}}:*$333333333~333333333<33333<33333333333333333333$*}}}}}}3;+/[///                                                               ",
-"                                                               [/[/[[[=3}}}:}}:}}:}}}:1$$333333333333333333333333333333333333333333*}}:}1<)[[///[                                                                 ",
-"                                                                 [/[/[/[(|::}}}}}}}}}}}}}:1*$33333<333333~3333333333333333<333<33$:}:}$|2[[///[                                                                   ",
-"                                                                   [//[/[[+;<:}}}}}}}}:}}}}}}::**$$33333333<3333<33333333333333*:}}:,)+[/////                                                                     ",
-"                                                                      /[////[[)<1:}:}}}}}}:}}}}}}}}::*$$33333~3333333333333$*:}:1,;[//////[                                                                       ",
-"                                                                        [[////[/[)|3:}:}}}}}}}}}:}}}}}}}}}}:::**1*$$**:*:::::$|)[[//[//[                                                                          ",
-"                                                                           /[////[/[[(=<*:::}:}}}:}}}}}}:}}}}}}}}}}}}}:::<|)+[[/////[/                                                                            ",
-"                                                                              [/////[[/[/((=|<31:::}:}}}}}:}:}:::1$<|=((/[////////[                                                                               ",
-"                                                                                  [////////[//[/[((((%|;=%|;=(((([[[[/[///[///[                                                                                   ",
-"                                                                                      [////////[//[/[//[/////[/////////////                                                                                       ",
-"                                                                                            [[////////////[////////[/                                                                                             ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  "};
diff --git a/perl-install/pixmaps/mouse_3b+_mini.xpm b/perl-install/pixmaps/mouse_3b+_mini.xpm
deleted file mode 100644
index c4b4960b3..000000000
--- a/perl-install/pixmaps/mouse_3b+_mini.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * mouse_3b+_mini_xpm[] = {
-"105 175 33 1",
-" 	c None",
-".	c #0C1530",
-"+	c #FE9A02",
-"@	c #212F55",
-"#	c #7C6535",
-"$	c #E8A518",
-"%	c #B68725",
-"&	c #DAA22A",
-"*	c #95742E",
-"=	c #E6A929",
-"-	c #757C98",
-";	c #F7B01E",
-">	c #B2924F",
-",	c #FDA106",
-"'	c #61543C",
-")	c #ACAECB",
-"!	c #7E84A0",
-"~	c #AFB2CD",
-"{	c #878DAC",
-"]	c #13234A",
-"^	c #E2A62E",
-"/	c #8D6F32",
-"(	c #5B6485",
-"_	c #3A4461",
-":	c #BABEDA",
-"<	c #9A9ABD",
-"[	c #FEB212",
-"}	c #D6A236",
-"|	c #465173",
-"1	c #A6A8C6",
-"2	c #9EA0C0",
-"3	c #697293",
-"4	c #313C5E",
-"                                                (3<|.                                                    ",
-"                                                ((<|.                                                    ",
-"                                                (-<4.                                                    ",
-"                                                (-<4.                                                    ",
-"                                                (3<@.                                                    ",
-"                                                (!<].                                                    ",
-"                                               (|!<..                                                    ",
-"                                               (|!<].                                                    ",
-"                                               ((!{].                                                    ",
-"                                               (|<<..                                                    ",
-"                                               ||{<].                                                    ",
-"                                               (_!<..                                                    ",
-"                                               (|!<].                                                    ",
-"                                               (|!<].                                                    ",
-"                                                _!<@.                                                    ",
-"                                                |3<@.                                                    ",
-"                                                33<4]                                                    ",
-"                                               2--<-@4                                                   ",
-"                                              {!!<<<!_]                                                  ",
-"                                              (|<<<<<!]]                                                 ",
-"                                              |_2<<<<<@.                                                 ",
-"                                              |_{<<<<<_.                                                 ",
-"                                              ||{<<<<<|]                                                 ",
-"                                              |_!<<<<<3.                                                 ",
-"                                              -(-<<<<<!].                                                ",
-"                                             )13|_444__]_-!                                              ",
-"                                          ~)1{!((33-333((33---                                           ",
-"                                       ~~1{{<~::~)11)111~:)<-(33                                         ",
-"                                     ~~2{/|:12<<<<<<<<<<<<<:{]||((                                       ",
-"                                    ~1{>;=@{2<<<<<<<<<<<<<<<|4[&'|||                                     ",
-"                                  ~){>;[[[|3)<<<<<<<<<<<<<<<]#[[[}||||                                   ",
-"                                 ~1!^[;,;[#_:<<<<<<{<<<{<<<{]%[[[[;*4__                                  ",
-"                                ~<>;,+++[[%]:1<<<<<<<<<<<<<3]&[[[[[[&___                                 ",
-"                               ){>,,++++[[>]1~<<<<((((<<<<2(@[[[[[[[[='44                                ",
-"                              1!&,+++++[[[$]<:2<<@....]{<<1|4[[[[[[[[[;#@4@                              ",
-"                             1!^,+++++[[[[[@!:)<<@....]{<<)_'[[[[[[[[[;[#@@@                             ",
-"                            1!$++++++[[[[[[4-::<<].....{<<~@'[[[[[[[[[[[[#@@                             ",
-"                           1!&++++++[[[[[[[_3::1<4....4{<<:]/[[[[[[[[[[[[[#@@                            ",
-"                          1!&,+++++,[[[[[[['(:::<].....{<<:]/[[[[[[[[[[[[[;'@]                           ",
-"                         1!}++++++;[[[[[[[['|:~:14....4{<<1]%[[[[[[[[[[[[[[[_@]                          ",
-"                        1<>$+++++,[[[[[[[[[#|:::~@....]{<<1]%[[[[[[[[[[[[[[[$4]]                         ",
-"                       1<!,+++++[[[[[[[[[[;/|::::4]..]4{<21]>[[[[[[[[[[[[[[[[>]]]                        ",
-"                       2-;+++++,[[[[[[[[[[[/_::::......{<<{]}[[[[[[[[[[[[[[[[[*]]                        ",
-"                      2!}+++++[[[[[[[[[[[[;/_:~::_....4{<2<]%[[[[[[[[[[[[[[[[[;']]                       ",
-"                     1<*;++++,[[[[[[[[[[[[[%@::::].....{<<{]$[[[[[[[[[[[[[[[[[[&@]]                      ",
-"                     <-;++++;[[[[[[[[[[[[[[*4:::~@....@{<2<]=[[[[[[[[[[[[[[[[,[[*]]                      ",
-"                    2!>,+++,[[[[[[[[[[[[[[[%@::::......{<<<]$[[[[[[[[[[[[[[[[[,[[_]]                     ",
-"                   <<![+++,[[[[[[[[[[[[[[[[*4:~::_...]4{<<!]=[[[[[[[[[[[[[[[[[[,[&]]]                    ",
-"                   <-$,++,[[[[[[[[[[[[[[[[[%@::::].....{<<!]&[[[[[[[[[[[[[[[[[[,,[#]]                    ",
-"                  <{%;++,[[[[[[[[[[[[[[[[[;*4:::~_....4{<<!]=[[[[[[[[[[[[[[[[[[,+[$@]]                   ",
-"                  <3=,+,[[[[[[[[[[[[[[[[[[[%@::~:......!<<!]=[[[[[[[[[[[[[[[[[[[+,[*]]                   ",
-"                 <!>;+,[[[[[[[[[[[[[[[[[[[[*@::::_...]_{<1{]=[[[[[[[[[[[[[[[[[[[,+,;@]]                  ",
-"                 <3[,+[[[[[[[[[[[[[[[[[[[[[*_::::......21:{]=[[[[[[[[[[[[[[[[[[[,++[*]]                  ",
-"                <!>;+[[[[[[[[[[[[[[[[[[[[[[/_:~::_]..]_)::<]}[[[[[[[[[[[[[[[[[[[;+++[4]]                 ",
-"                <3[,,[[[[[[[[[[[[[[[[[[[[[[/_::::......1::2]>[[[[[[[[[[[[[[[[[[[[+++,*]]                 ",
-"               {!>[[[[[[[[[[[[[[[[[[[[[[[[[(|:~::|]..]|)::1]}[[[[[[[[[[[[[[[[[[[,++++[@]]                ",
-"               {-;[[[[[[[[[[[[[[[[[[[[[[[[['(::::......1::~]*[[[[[[[[[[[[[[[[[[[;++++,/]]                ",
-"              {{*[[[[[[[[[[[[[[[[[[[[[[[[[[_(::~:_]..]_)~::]%[[[[[[[[[[[[[[[[[[[,+++++,]]]               ",
-"              {3&[[[[[[[[[[[[[[[[[[[[[[[[[[_3::::......1:::@/[[[[[[[[[[[[[[[[[[[++++++;']]               ",
-"              {|%[[[[[[[[[[[[[[[[[[[[[[[[[[@-::~:4]..]_):::4#[[[[[[[[[[[[[[[[[[;++++++,_]]               ",
-"             {-_/[[[[[[[[[[[[[[[[[[[[[[[[[[]{::::......2:::||[[[[[[[[[[[[[[[[[[,++++++,@]]]              ",
-"             {33@[[[[[[[[[[[[[[[[[[[[[[[[[&]<:::~_]..]_1:::(|[[[[[[[[[[[[[[[[[,+++++++*]4(.              ",
-"             !{~@#[[[[[[[[[[[[[[[[[[[[[[[[%]~::::......1:::3][[[[[[[[[[[[[[[[[+++++++$@]{<]]             ",
-"            !3):{@>[[[[[[[[[[[[[[[[[[[[[[[*@:~:::(]..]3):~:{@[[[[[[[[[[[[[[[[+++++++,_]|::4]             ",
-"            !-::~3]*[[[[[[[[[[[[[[[[[[[[[[#_:::~::-(33:::::2]>[[[[[[[[[[[[[[++++++,$_](~2~3.             ",
-"           {-<~:::!@(;[[[[[[[[[[[[[[[[[[[[||::::::::~:::::::]>[[[[[[[[[[[[+++++++;%@]()2<)1]]            ",
-"           !3~:::::24@/;[[[[[[[[[[[[[[[[[[@-:~::~:::::~:~:~:4'[[[[[[[[[[[+++++,[%_]4{1<<<2:_]            ",
-"           !-:::::~::!4@(}[[[[[[[[[[[[[[[$]{::::::::::::::::(|[[[[[[[[,++,,,[$/4]@312<<<<<~-]            ",
-"          {-<~:~::::~::{|@@#>=[[[[[[[[[[[%]~:::::~::~:~:::::-][[[[[[[,[[;;%/_]]|!~1<<<<<<<11]]           ",
-"          !(~::::::::::::~!|@@4(*>=[[[[[['|:~:~:::~:::::::~:1]}[[[[[$%*#4@]]|-1~2<<<<{<<<<2:4]           ",
-"          --:::::~:::~:::::::2-(4@]@4|'#/@({<111)::::::~2)1<{@_/#'_@]]]4'-2~:22<<<<<<<<<<<<~3.           ",
-"         !-{::~::~:::~::~:::::::::){!((|_@@]]]]]]]]]]]]]]]]]]]@4||(-{1~::~22<<<<<<<<<<<<<<<11]]          ",
-"         -3~:::::::::::::::~::~::~~~)~~::::~:1112{<{<{<{)11~:::~::::~)12<<<<<<<<<<<{<<<{<<<2:@.          ",
-"         !3:::::::~::~::~:::::::::::~1<<<2111)~~~:~::::::~:~~~~111<<2<<<<<<<<<<<<<<<<<<<<<<<:(]          ",
-"         -{:~:~::~:::::::::~::~::::::::12<<<<<<<2<<<<<2<<<<<<<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<1{]          ",
-"        -32::::::::~:::~:::::::~:::::::::~2<<<<2{<<<<2{2{<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<{<<1~]]         ",
-"        -(:::::~:::::~::::~::::::~:~:~:::::~1<<<<<<<<{2<2<<<<<<<<<<<{<<<<<<<<<<<<<<{<<{<<<<<<~_.         ",
-"        --::~::~::::::~:::::~::::::::::~:::::~1<2{<<2<2{<<<<<<<{<<<<<<{<<<<<<<<<<<<<<<<<<<<<<~3]         ",
-"       !3{:::::::~:::::::~::::~::~::::::::::::::122<<<<<<<<<<<<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<21{].        ",
-"       -32::::::::~::~:::::~::::::::~::::~:~::::::)<<<<<<<<<{<<<<<<<<<<<<<<<{<<<<<<<<<<<{<<<<2:]]        ",
-"       -3:::~::~::::::::~:::::~::::::~:~:::::~::~::~)<<<{<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~_.        ",
-"       -3::::::::::~::::~::~::::~:~::::::::~::::::::::)<<<<<<<<<<<<<{<<{<<<<<<<<<<<{<<<<<<<<<<~(]        ",
-"       3{:~:::~::~:::~:::::::::::::~::~::::::~::::::::::1<<<<<<<<<<<<<<<<<<<{<<<<<<<<<{<<<{<<<1{]        ",
-"      -32:::~::::::::::::~:::~::~::::::::~:::::~:~:~::::::1<<<<<{<<<<<<<{<<<<<<<<<<<<<<<<<<<<<2~].       ",
-"      -(::::::~::~:::~::::::::::::::~:~:::~:::::::::~:~:~:~~1<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<<<<~4.       ",
-"      33::~::::::~:::~::~::~:~:::~::::::::::~::::::::::::::::~2<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<~|]       ",
-"      3!::::~:::::::::::::::::::::::::~:~:::::~:~:~::::::::~:::1<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<1-.       ",
-"     -3{:::::::~:::~:::~::::::~::~:~::::::::~:::::::~:~:~:::~:::~2<<{<<<<<<<<<<<<<<<{<<{<<{<<<<2<]       ",
-"     -(1:~:::~:::~:::~:::~:~::::::::~::::~::::::::::::::::::::~:::)2<<<<<{<<<{<<<<<<<<<<<<<<<<<<).]      ",
-"     3(:::~:::::::::::::::::::~::~::::~:::::~::~:~::::::~::::::::::~1<<<<<<<<<<<<<<<<<<<<<<{<<<<:@.      ",
-"     33:~::::~:::~:::~:~:::~:::::::::::~:::::::::::~:~::::~:~:::~::::)<<<<<<<<<{<<<<<<<<<<<<<<<<1|]      ",
-"     3-:):::::~:::~:::::::::::~:::~::::::~:::~:::~::::~::::::~::::::::~1<<{<<<<<<<<<<<<<<<<<<{<<13.      ",
-"     3{~~::~::::::::::::~::::::::::~:~::::~::::::::::::::~:::::~::::::::)2<<<<<<<<<{<<<<<<<<<<<<2!.      ",
-"    -(2~~::::::~::~::~::::~:~::~::::::::::::::~::~::::~::::::::::~:~::::::<<<{<<<<<<<<{<<<<<<<<<<2].     ",
-"    3(~1::~::~::::::::~::::::::::~::::~:~:~:::::::~:::::~::~::~::::::~:::::1<<<<{<<<<<<<<<<<<<<<<~].     ",
-"    3(:2:::::::~::~:::::~:~::~:~::::~:::::::~:~::::~::::::::::::~:~::::~::::~<<<<<<<<<<{<<<{<<<<<)@.     ",
-"    33:2::~:::::::::~::::::::::::::::::::::::::::::::~:::~::~::::::::::::~::::2<<<<<<<<<<<<<<<{<<)|.     ",
-"    33~1:::~::~::~:::::::::~::::~:~:~::~::~:::~:~:~:::~::::::~::::~:~:~::::::::1<{<<<<<<<<<<<<<<<2(]     ",
-"    ({11::::::::::::~:~:::::::~:::::::::::::::::::::::::~::::::~:::::::::~:~::~:)<<<<<{<<<<<<<<<<23.     ",
-"    ({1)~::~::~::~:::::::~::~::::::::~::~::~::~::::~:::::~::::::::~::::~:::::::::~<<<<<<<<{<<<<<<2!]     ",
-"   3(22~::::::::::::::~::::::::~::~:::::::::::::~::::~:::::~:~::::::~:::::::~:::::~<<<<<<<<<<<<<<<<.     ",
-"   (()<~~::~::~::~::~:::::~:~:::::::::~::~:~::::::::::::~:::::~:~::::::~::~:::~:::::<<<<<<<{<<{<<<1].    ",
-"   3|:<~::::::::::::::~:~::::~::~:~::::::::::~:~:~::~:::::~:::::::~::::::::::::::::::2<<<<<<<<<<<<)].    ",
-"   3(~<~:~::~::~::~:::::::::::::::::~::~:::::::::::::::~::::::::~:::~:::~:::~:::~:~:::2<<<<<<<<<<<)@.    ",
-"   33~<~:::::::::~::::::::::::~::::::::::~:~:~:~:::~:::::~::~::::::::~::::~::~::::::::~1<<<<<{<<{2)_.    ",
-"   (3)<~:::~::~::::~:~:~:~:~::::::~::~:~::::::::~:::::~:::::::~:~:~::::::::::::::::~::::2<<<<<<<<<1|.    ",
-"   (-1<~:~::::::::::::::::::~::~:::::::::~::::::::~:::::~::~:::::::~::~::::~:~:~:~:::~:::1<<<<<<<<1(.    ",
-"   (!2<~:::~::~:~::~:::~:::::::::::~:::~::::::~::::::~:::::::~::::::::::~::::::::::~:::~::2<<<<<<<1(]    ",
-"   ({2<~::::::::::::~:::~:~::~:~:~::::::::~:::::~::~:::~:::::::~:~::~::::::::~:::::::::::::2<<<<<<13.    ",
-"   ({2<):~::~:::~::::::::::::::::::~:::::::~:~:::::::::::~::~:::::::::~:~:~:::::~:::~:::~:::2<{<<<2!.    ",
-"  3(22<)::::::~:::::::~::::~::::::::~:~:~::::::~:::::~:::::::~::::~::::::::~::~::~::::~::::::2<<<<2{]    ",
-"  (|2<<1:::~::::::~:~::::~:::~:~::::::::::::~:::~:~:::~::~::::::~::::::::::::::::::~::::~::~::2<<<1{.    ",
-"  3|)<<1:~:::~::::::::::::::::::~:~::::::::::::::::::::::::~:~::::~:~:~::~::~::~::::::::::::::~2<<21.    ",
-"  (|)<<2::::::~:~:::~::~:~::::::::::~:~:~:~::~::::~:::::~:::::::~::::::::::::::::::::~::~::~:::~<<12].   ",
-"  (|)<<2::~:::::::::::::::~:~:~::::::::::::~::::~:::~:~:::~:::::::~::~:~::~::~::~:~:::::::::::::~2)2].   ",
-"  (|~<<<::~::~:::~:::~:::::::::::~::::::~::::~::::::::::::::~:~::::::::::::::::::::::~::~:::~::::::~.]   ",
-"  (|:<<<:::::::~:::~::::~::::::::::~:~:::~::::::::~::::~:::::::~:::~:~::~:~:::~::~::::::::~:::~::~::..   ",
-"  ||:<<<):::~::::::::::::::~:~:~:~:::::::::::~:~::::~:::~::~:::::~:::::::::~::::::::~::~:::::::::::~].   ",
-"  (|:2<<1::~::~:~::~:~:::::::::::::~:::::~:~:::::::::::::::::~:::::::~:::::::~::~::::::::~::~::~:::~].   ",
-"  ||:<<<2::::::::::::::~:~:::~:::~::::~::::::::~:~::~::~::~::::~::~::::~::~::::::::~::~:::::::::::::..   ",
-"  ||:2<<2:~::::~::::::::::~::::::::~:::::~::~:::::::::::::::~::::::~::::::::~::~::::::::~::~::~::~::].   ",
-"  ||:2<<2~::~::::~:~:~:~:::::::::::::::~::::::::~::~::~::~:::::~::::::~::~::::::::~::~:::::::::::::)].   ",
-"  |_)1<<{~::::~:::::::::::~:~:~::::~:~::::~::::::::::::::::~:::::~::~::::::~::~::::::::~::~::~::~::2..   ",
-"  ||11<2<1:~:::~:::~::::~::::::::~::::::::::~::~::~::~::~:::::~:::::::::~::::::::~::~::::::::::::::2].   ",
-"  (_<)<<<<:::::::~:::~::::::~:~:::::::~:~:::::::::::::::::~:::::~::::~::::~::~::::::::~::~::~::~:::{.    ",
-"  |_{)<<<<~~::~::::::::::::::::::~:~:::::::~::~::~::~::~:::::~::::~:::::::::::::~::~::::::::::::~::-.    ",
-"   _!~<<{<1:::::~::~::~:~:~:::~:::::~::~:~:::::::::::::::~:::::~::::~::~:~::~::::::::~::~::~:::::::(.    ",
-"   _3:<<<<<~:~:::::::::::::::::::::::::::::::~::~::~::~:::::~::::~:::::::::::::~::~::::::::::~:::~:|.    ",
-"   _|:2<<<<~:::~:~::~:::::~:~:::~:~::~:::~::::::::::::::~::::::::::~::~:::~::~::::::~::~:::::::~::~@.    ",
-"   44:1<<<<<::::::::::~:~:::::~:::::::::::::~::~::~::~:::::~:~::~::::::~:::::::::~:::::::~::~:::::~..    ",
-"   442)<<<<<):::~:~::::::::::::::::~:~:~:::::::::::::::~::::::::::~::::::~::::~::::~::~:::::::::::{.     ",
-"    @!~<<<<<2~:::::~::~::::~::~:~:::::::~::~::~::~::~:::~:::~::~:::~:::::::~::::::::::::~::~::~:::(.     ",
-"    4(:<<<<<<~:::::::::~:::::::::::::~::::::::::::::::::::~::::::::::~:~:::::~::~:~:::::::::::::~:_.     ",
-"    @4~1<{<<<2~:~::~:::::~:~:::::~::::::~::~::~::~::~:::::::~::~::::::::::~:::::::::~::~::~::~:::)].     ",
-"    @@<~<2<<<<)::::::~::::::~::~::::::::::::::::::::::~:~::::::::~:~::~:::::~::~:::::::::::::::::-.      ",
-"     @(:<<<<<<<~::~::::~::::::::::~:~:~:::~::~::~::~::::::::::~::::::::::~::::::~::~::~::~::~::~:|.      ",
-"     @4:2<<{<<<2::::~:::::~::~:::::::::::::::::::::::~:::~:~::::~:::~::~:::~::::::::::::::::::::~].      ",
-"     ]@{)<2<<<<<)~::::::~:::::::~:~::~:~::~:~::~::~:::~::::::::::~::::::::::~:::::~::~::~::~::~:-.       ",
-"      ](:<<<<<<<<~::~:~::::~::~:::::::::::::::::::::::::~:::~:~::::~::::~:::::~:~:::::::::::::::4.       ",
-"      ]])){<2{<<<2~:::::~::::::::::~:::~::::~::~::~::::::~:::::::::::~::::::::::::::~::~::~::~:<..       ",
-"      @]3:<<<<<<<<<:::::::::~:::::::~::::~::::::::::~:~::::~:::~::~::::~::~:~::::~:::::::::::::|.        ",
-"       ]@:2<<2{<<<<<~:::~:~::::~:~:::~::::::::~::~::::::::::::::::::::::::::::~:::::::~::~::~:1].        ",
-"       @]3:<{2<<<<<<<~:::::::~::::::::::~::~:::::::~:::~::~::~::~::~:~::~:::::::~::~:::::::::~(.         ",
-"        ]@~1<<<2{<<<<2~:::~:::::::~::~:::::::~::~:::::::::::::::::::::::::~::~::::::::~::~:::1..         ",
-"        @]3:<<<<<<<<{2<1:::~::~::::::::~::::::::::~::~::~::~::~::~::::~::::::::~::~::::::::~:|.          ",
-"         ]]11<<<<<<<<<<<1:::::::~:~::::::~::~::~:::::::::::::::::::~:::::~::~::::::::~::~:::<..          ",
-"          ](~2<{2<<<<<<<<<~:~:::::~::~:::::::::::~::~::~::~::~::~::::~::::::::~::~::::::::::_.           ",
-"          ]]{~<<<<<<<<<<{<<1~:::::::::::~::~::~:::::::::::::::::::::::::~::~::::::~::~::~::-..           ",
-"           ]4~1<<{<<<<<<<<<<<1~::~:~::::::::::::~::~::~::~::~::~::~:~::::::::~::::::::::::2].            ",
-"           ]](:2<<<{<<<<<<<<<<<1~:::~::~::~::~:::::::::::::::::::::::::~::~:::::~:::~::~:~|.             ",
-"            ]]{~2<<<<<<<<<<<<<<<<2)::::::::::::~::~::~::~::~::~::~:::~::::::~:::::~::::::3..             ",
-"             ]]1~<<<<<<<<<<<<<<<<<<<2)~::~::~:::::::::::::::::::::~::::::~:::::~::::~:::<].              ",
-"              ]4~)<{<<<<<<<<<<<<<<<<<<<<1~~:::~::~::~::~::~::~::::::::~::::~::::::::::~)@.               ",
-"              ]]|:1<<<<{<{<<<<<<<<<<<<<<<<<221)1~~~:::::::::::~::::~::::~::::~::~:::~::4.                ",
-"               ]](:1<<<<<<<{<{<<<<<<<<<<<<<<<<<<2<<<<221~~::::::~:::::::::::::::::~::~|..                ",
-"                ]]3:1<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<2<1)::::::~:~::~:~::~::~::::~3..                 ",
-"                 ]]3:)<<<<<<<<<<<<{<<<<<{<<<<<<<<<<<<<<<<<<<21:~::::::::::::::::::::3..                  ",
-"                  ]]3:~2<<<<<<<<<<<<{<<<2{<<<<<<<<<<<<<<<<<<<<1:::::~:::~::~::~:~::(..                   ",
-"                   ]](:~1<<<<<<<<<<<<<<<<<<<{<<{<<{<<<<<<<<<<<<<):~:::~::::::::::~(..                    ",
-"                    .]|~:)<<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<{<<<~:::::::~::~:::~|..                     ",
-"                     ].42:~2<<<<<<<<<<<<<<<<<<<<<<<<{<<{<<<<<<<<<<~:::::::::::~14..                      ",
-"                      ]]@!::~2{<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<<2::~:~::~:::{].                        ",
-"                        .]()::)2<{<<<<<<<<<<{<<<<{<<<<<<<{<<<<<<<<<~::::::::)3..                         ",
-"                         ..@{:::)2<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<)::::~::{4..                          ",
-"                           ..|2:::~1<<<<<{<<<<<<<<<<<{<<<<<<<{<<<<<):~:::)(..                            ",
-"                            ].](1~::~12<<<<<<<<<<<<<<<<<<{<<<<<<<<<~:::~3]..                             ",
-"                              ..](2::::~)1<<<{<<<{<<<<<<<<<<<<<{<<1::)3@..                               ",
-"                                ...|{~:::~:))2<<<<<<<<<<<<<<<<<<<1:2(]..                                 ",
-"                                  ...@({:::::::~)12<<<{<<<<{<<1)134...                                   ",
-"                                    ....]|3<~~:::::::::~~)~~1!(4....                                     ",
-"                                       .....]@|((-!{{{!33|_].....                                        ",
-"                                           ..................                                            ",
-"                                                                                                         ",
-"                                                                                                         ",
-"                                                                                                         "};
diff --git a/perl-install/pixmaps/mouse_3b.xpm b/perl-install/pixmaps/mouse_3b.xpm
deleted file mode 100644
index 4c8a3bd9a..000000000
--- a/perl-install/pixmaps/mouse_3b.xpm
+++ /dev/null
@@ -1,386 +0,0 @@
-/* XPM */
-static char * mouse_3b_xpm[] = {
-"210 350 33 1",
-" 	c None",
-".	c #0A1630",
-"+	c #FE9A02",
-"@	c #253359",
-"#	c #C99121",
-"$	c #F3AE18",
-"%	c #D6A02C",
-"&	c #96762E",
-"*	c #3E4862",
-"=	c #B68626",
-"-	c #FDB820",
-";	c #FE9E02",
-">	c #E6AA32",
-",	c #A67E2A",
-"'	c #F2B22A",
-")	c #7B84A1",
-"!	c #7C673B",
-"~	c #5C6888",
-"{	c #B79346",
-"]	c #0E1A3A",
-"^	c #F2B22E",
-"/	c #BABEDA",
-"(	c #848CAA",
-"_	c #4A5778",
-":	c #FEA206",
-"<	c #A7A9C8",
-"[	c #757C94",
-"}	c #9A9ABE",
-"|	c #9FA1C0",
-"1	c #11244D",
-"2	c #AFB0CD",
-"3	c #697392",
-"4	c #FEB212",
-"                                                                                                 ~_3}}}]].                                                                                                        ",
-"                                                                                                 ~_)}}}]..                                                                                                        ",
-"                                                                                                 ~_)}}3].                                                                                                         ",
-"                                                                                                 __(}}3].                                                                                                         ",
-"                                                                                                ~~*|}}3]]                                                                                                         ",
-"                                                                                                ~__}}}_].                                                                                                         ",
-"                                                                                                ~~*|}}_].                                                                                                         ",
-"                                                                                                __~}}}*].                                                                                                         ",
-"                                                                                                ~__|}}@].                                                                                                         ",
-"                                                                                                ~~_}}}*].                                                                                                         ",
-"                                                                                                ~_~}}(@].                                                                                                         ",
-"                                                                                                __3}}}@].                                                                                                         ",
-"                                                                                                __3}}}]].                                                                                                         ",
-"                                                                                                __~}}}1].                                                                                                         ",
-"                                                                                                __3}}(]].                                                                                                         ",
-"                                                                                                __~}}}1]]                                                                                                         ",
-"                                                                                                __3}}(]].                                                                                                         ",
-"                                                                                                ~_[}}}1.]                                                                                                         ",
-"                                                                                                __)}}(1..                                                                                                         ",
-"                                                                                                __)}}}]]]                                                                                                         ",
-"                                                                                                _*)}}}]..                                                                                                         ",
-"                                                                                                _*)}}}1]]                                                                                                         ",
-"                                                                                                _*)}}(]].                                                                                                         ",
-"                                                                                                _*~}}}1.]                                                                                                         ",
-"                                                                                                __~}}(1..                                                                                                         ",
-"                                                                                                __3}}}]]]                                                                                                         ",
-"                                                                                                _*~}}}]]]                                                                                                         ",
-"                                                                                                __~}}}@].                                                                                                         ",
-"                                                                                                **3}}}@]]                                                                                                         ",
-"                                                                                                **_}}}*].                                                                                                         ",
-"                                                                                                **_}}}@]]                                                                                                         ",
-"                                                                                                ___}}}*1]                                                                                                         ",
-"                                                                                                ~_*}}}_1]                                                                                                         ",
-"                                                                                                )3*}}}_111                                                                                                        ",
-"                                                                                                (3*}}})@1@@                                                                                                       ",
-"                                                                                               |(~[}}}}}*@@@                                                                                                      ",
-"                                                                                              }(~)}}}}}}}_*@@                                                                                                     ",
-"                                                                                             [)~)|}}}}}}}}_@11                                                                                                    ",
-"                                                                                             ~_~|}}}}}}}}}}~]1                                                                                                    ",
-"                                                                                             __*}}}}}}}}}}}}1]]                                                                                                   ",
-"                                                                                             ***}}}}}}}(}}}}@1]                                                                                                   ",
-"                                                                                             _**}}}}}}}}}}}}*]]                                                                                                   ",
-"                                                                                             ***}}}(}}}}}}}}_1]                                                                                                   ",
-"                                                                                              **[}}}}}}}}}}}[]]                                                                                                   ",
-"                                                                                              **)}}}}}}}}}}}(]]]                                                                                                  ",
-"                                                                                              _*)}}}}}}}}}}}}1]]                                                                                                  ",
-"                                                                                              _*3}}}(}}}}}}}}@1]                                                                                                  ",
-"                                                                                              **~}}}}}}(}}}}}_]]                                                                                                  ",
-"                                                                                              __~}}}}}}}}}}}}~]]                                                                                                  ",
-"                                                                                              3_~}}}}}}}}}}}}31]                                                                                                  ",
-"                                                                                              )~_[3____**__~~~111                                                                                                 ",
-"                                                                                             <)~@111111111111111*_[)                                                                                              ",
-"                                                                                        2<<||(3*@11111@**11111@@*_3[))))                                                                                          ",
-"                                                                                     2<<||()3[[)(}///////////2}}[33~~333[[[                                                                                       ",
-"                                                                                   2<<}(3)(</////////////////2//////<([~~~3333                                                                                    ",
-"                                                                                2<<}([(|///////2<<|||}}(}}}}}}}}|<22////|)__~~33                                                                                  ",
-"                                                                              22|()~*)///22||}}}}}}}}}}}}(}}}}}}}}}}|2///)@@*__~~~                                                                                ",
-"                                                                            22|([[%_1@//}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}<//@11!!@*__~~                                                                              ",
-"                                                                          22|(3&'--#11[/|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2}11@4->!@*___~                                                                            ",
-"                                                                         22([)>-444-@1_/2}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}_11!4444%!@*____                                                                          ",
-"                                                                       22}[[%--4-444!11//}}(}}}}(}}}}}}}}}}}}}(}}}}}}}}}@11#44-444#*@*____                                                                        ",
-"                                                                      2|(3{--444444$,11(/2}}}}}}}}}}}}}}}}}}}}|(}}}}}}}(111444444-4-=@@**_*                                                                       ",
-"                                                                    22}[['-444$::444%11[/2}}}}}}}}(}}(}}}}}}}}}}}}(}}}}[11*444444444-$!@@**_                                                                      ",
-"                                                                   2|(3{-444:++++444411_//|}}(}}}}}}}}}(}}}}}}}}}}}}}}}311!444444444444{@@****                                                                    ",
-"                                                                  2|)[$-4$+++++++4444*1*//2}}}}}}}}}}}}}}}}}}}}}}}}}}}<*11=4444-44-4444-$_@@***                                                                   ",
-"                                                                22([,-44;+++++++44444!11///}}}}}}}}}}}}}}}}(}}}}}}(}}}/@11%4-4444444444444&@@*@*                                                                  ",
-"                                                               2<(3{-4;++++++++;44444!11<2/2}}}}}}}}}}}}(}}}}}}(}}}}}}/1114444-444444-444-4{@@@*@                                                                 ",
-"                                                              2|(3>-$+++++++++;4-4444=11}///}(}}}}}}}}}}}}}}}}}}}}}}}<}11@44444-44-444444444%*@@*@@                                                               ",
-"                                                             2|)3'4;++++++++++$444-44#11[///<}}}}(}}(}}}}}}}}}}}}}}}}2}11*44-4444444444444444$*@@*@@                                                              ",
-"                                                            <})&'4;++++++++++$4444444>113///2}}}}}}}}}}}}}}}}}}}}}}}}/311!44444-44-44-444444444_@@@@@                                                             ",
-"                                                           <|[[-$+++++++++++:44444444411~2///}}}}}}}}}}}}(}}}}}}}(}}}/~11!444-444444444444444444!1@*@@                                                            ",
-"                                                          <}[&-$+++++++++++:444-444-44@1*////2}}}}}}}(}}}}}(}}}}}}}}|/_11&-444444-44-44-44-44444'!1@@@1                                                           ",
-"                                                         <}3[-:++++++++++++444444-4444*1*//2//}}}(}}}}}}}}}}}}(}}}}}</*11#4444-4444444444444-4444-!1@@@1                                                          ",
-"                                                        <}[&-:+++++++++++:4444-4444444*1@////2<}}}}}}}}}}}}}}}}}}}}}</*11#4-4444-44-44-44-4444444$'!1@@11                                                         ",
-"                                                       <|[[-$++++++++++++4444444444444!11//////}}}}}}}(}}}}}}}}}}}}}2/@11$444-4444444444444-44-44444_1@@11                                                        ",
-"                                                      <})&-:++++++++++++44-444-44444-4&1]////2/|}}}}}}}}}}}}}}}}}}}}2/111444444444-44-44-444444444444!1@@11                                                       ",
-"                                                     <|)3'$++++++++++++$4444-444-44444!11/2////2}}}(}}}}}}}}}}}}}}}}2/11144-444-4444444444-44444444444*1@@1                                                       ",
-"                                                     |(~'4++++++++++++4444444444444444=11}//////|}}}}}}}}(}}(}}(}}}}//11@444-4444-44-44-4444-444444444$*1@11                                                      ",
-"                                                    |(3%4++++++++++++$4444-444-44-4444#11}2/////2}}}}}(}}}}}}}}}}}}}/|11*-4444-444444444444444-44-44444$@1@11                                                     ",
-"                                                   <(~%-++++++++++++444-444-444444444-=11}///2///}}}}}}}}}}}}}}}}}}}/}11*444444444-44-44-44-444444444444#@1111                                                    ",
-"                                                  |}[=-;+++++++++++:444444444-4444444-#11(/////2/2}}}}}}}}}}}}}}}}}}2}11*44-4444-444444444444-4444-444444,1@111                                                   ",
-"                                                 |}[[-:+++++++++++$4444-44-44444-44444>11(/2//////}}}}}}}}}}(}}}}}}|/}11_4444-444444-44-44-4444-444444444-!1111                                                   ",
-"                                                 |)3'4+++++++++++:4444444444-44444-4444113///2///2<}}}}(}}}}}}}(}}}|/}11&444444-44-444444444-4444444444444-*1@]1                                                  ",
-"                                                |(3%-+++++++++++$444-4444-44444-444444^11~////////2}}}}}}}}}}}}}}}}}/(1]&444-444444444-44-444444-4444-44444:@1111                                                 ",
-"                                               |}~{4:++++++++++:444444-4444-44444444444113////2////<}}}}}}}}}}}}}}}|/311!44444-44-44-444444-44-444-4444-4444=1@111                                                ",
-"                                              ||[[-:++++++++++44444-44444444-44-4444-4^11~/2///////2}}}}}}}(}}}}}}}|2311&44-444444444444-44444444444444444-44!1111                                                ",
-"                                              })~44++++++++++;4444444-44-44444444-44444113//////////<}}(}}}}}}}(}}}|/311!-444-44-44-44-444-44-44-44-444444444-*1111                                               ",
-"                                             |(~%-;+++++++++$44-44-444444-4444-44444444*1~///2/2////2}}}}}}}}}}}}}}|/311&444444444444444444444444444-444444444%111]1                                              ",
-"                                            |}[,-:+++++++++;-4444444-444444-44444444444*1_/2//////2//<}}}}}}}}}}}}}|/~11=444-44-44-44-44-444-44-444444444$44444&1111                                              ",
-"                                            })~'4+++++++++$444444-444-44-4444-44-444-44*1*/////2/////2}}}}(}}}}}}}}|/311#-444444444444444-444444-444-44444:44444*11]1                                             ",
-"                                           }(~%';++++++++;4444-44444444444-444444444444*1*////////////<}}}}}}}}}}}}|/3]1#44-44-44-44-444444-444444-44444444;4444%11111                                            ",
-"                                          }}[)4$++++++++:44444444-44-44-44444-44-444444*1*/2/////2////2}}}}}(}}}}}}|2311#444444444444-44-444-44-4444-444444::4444&111]                                            ",
-"                                          })~44++++++++;-444-44444444444444-44444444444*1*///2/////////<}}}}}}}(}}}|/311#444-444-444444444444444444444444444;$444-*1111                                           ",
-"                                         |(3{-:+++++++:444444-44-444-444-44444-44-44444*1*///////2/2///2}}}}}}}}}}}}/311#-444-4444-44444-444-444-444-4444444:+4444#111]1                                          ",
-"                                         }[344+++++++;4444-4444444-444-444444444444-444*1*/2//2/////////<}}}}}}}}}}}2_11#44444444444-44444-444-444-444-4444-4;;444-!111]                                          ",
-"                                        })~>-;++++++:4444444444-4444444444-44-44-444444*1*/////////2////2}}}(}}}}}}}/*11#4-444-44-44444-4444444444444444-44444+;444>@1111                                         ",
-"                                       }(3,-4++++++;-444-444-4444-44-444-44444444444444*1*/2////////2////2}}}}}}}}}}/*11#444-444444-4444444-444-444-4444444444;+:444&111]                                         ",
-"                                       })3'4++++++:44-444-4444-444444-444444-44-44-4444*1*////2/2/////////|}}}}}}}}}/*11#4444444-4444-44-444-444-4444-44-44444:++444-@1111                                        ",
-"                                      }(3{44++++++444444444-4444-444444-44-444444444444*1*//2////////2///2/}}(}}}}}}/*11#44-44-444-444444444444444-444444444444+++444#111]                                        ",
-"                                      ([3-4+++++;4444-44-44444444-44-4444444-44-44-4444*1*////////2///2////<}}}}}(}}/*11#444444444444-44-444-44-44444-44-44444-:++;444*1111                                       ",
-"                                     }(~%4$+++++4444444444-44-44444444-4444444444444-44*1*///2/2//////////2/}}}}}}}|/*11#444-444-444444444-44444444-444444-44444+++$44;111]1                                      ",
-"                                     ([344+++++44444444-44444444444-4444-44-44-44-44444*1*2////////////2////2}}}}}}}/*11#-444-444-44-44-4444-444-444444-44444444++++4-$!111]                                      ",
-"                                    })~$4$++++4444-44-444-44-44-44444444444444444444444*1_2///2//2/2/////////<}}}}}</~11#444444444444444444444-444-44-444-444444:++++44%1111]                                     ",
-"                                    (3&44++++$44444444444444444444-44-44-444-44-44-4444*1*/2////////////2/////|}}}}2/311#-444-4444-44-44-44-44444444444444-4444-:++++:44!11]1                                     ",
-"                                   })~>-:+++:4444-4444-444-44-44-444444444-444444444-44*1*///2//2///2/////2////<}}|//~11#444444-4444444444444-44-444-44-4444-4444+++++44$@11]1                                    ",
-"                                   ([[-4;++$44-4444-444-444444444444-44-444444-44-4444411~///////2///2///////2//22///311#-44-4444-44-44-44-444444-444444444444444+++++;44!111]                                    ",
-"                                  })~>44++;44444-44444444-44-4444-4444444-44-4444444444113/2//2////////2///2///////2/311,44444-4444444444444-444444-44-44-4444444;+++++:4$@111]                                   ",
-"                                  ([&-4++:444444444-44-4444444-4444-44-4444444-44-444--113///////2//////2////2///////311!44-4444444-44-44-444-44-4444444444444444:++++++44&11]1                                   ",
-"                                 })~>-4+;444-4444-444444-44-4444-4444444-4444444444-4441132////////2/2/////////2////2311&4444-44-44444444444444444-44-44-44-44444:++++++;4>@11]]                                  ",
-"                                 ([&-4:+444444-444444-4444444-4444444-4444-44-44-444444113///2//2////////2///////2///}11!4444444444-44-444-4444-444444444444-4444:+++++++:4!1111                                  ",
-"                                ()~>'4+$444-4444-44-444-4444444-44-444444444444444444-#11[/2/////2////2////2/////////(11&444-44-44444444-444-4444-44-44-444444444:++++++++4%111]                                  ",
-"                                (3[-4::444444-44444444444-44-444444444-44-444-44-44444#11}/////////2////////2/2///2//}11!444444444-44-444444444444444444-444-444-:+++++++;:4!111]                                 ",
-"                               ((~#-4:444-44444-4444-444444444-44-44-444444-444444-444#11(///2/////////2////////2///2}11*4444-444444444-44-44-44-44-444444-444-44:+++++++++4%1111                                 ",
-"                               ([3-4$44444-444444-444-44-44-444444444444-444444-444444{11}////2/2///2///2/////////////11*4-444-44-44-444444444444444-44-44444444-++++++++++:4_11]]                                ",
-"                              ((~=-4:4444444-4444444444444444-44-44-44-444-44-44444444!11}/2//////2///////2/2/////2///11*4444444444444-44-44-44-444444444-44-4444+++++++++++4#111]                                ",
-"                              ([~-4444-444444-444-44-44-44-444444444444444444444-4444-!11///////////2//////////2////2/1114-44-44-44-4444444444444-4444-444444444$+++++++++++:4*111]                               ",
-"                              (3=44:4444-444444-444444444444-44-44-44-44-44444-444-444!11////2////////2//////2////////*11444444444444-44-44-4444444-4444-4444444:+++++++++++:4,111]                               ",
-"                             ()_{44444444-44-444444-44-44-44444444444444444-444444444-*11/2/////2///////2/2//////2///2*11444-44-44-4444444444-44-4444444444-4444+++++++++++++4#11]1                               ",
-"                             (3*&4444-44444444-44-444444444-44-44-44-44-44444-44-44444*1*/////2///2////////////2///2//*11#4444444444-44-44-4444444-44-444-444444+++++++++++++4,1111]                              ",
-"                            ()~@!44444-4444-444444444-44-44444444444444444-44444444444@1*//2/////////2//////2/////////311#4444-44-4444444444-44-444444-4444-444++++++++++++++$!111]1                              ",
-"                            ([_1@-444444-4444-4444-4444444-44-44-44-44-44444-4444-444411_///////2//////2/2///////2////311,44-444444-44-4444444444-4444444444444++++++++++++++:*1111]]                             ",
-"                            )~_@1%-44-444444444-4444-44-44444444444444444-4444-444444$11~//2/2/////2/////////2/////2//(11&444444-4444444-44-44-4444-444-44-444+++++++++++++++%1111111                             ",
-"                           ([_}11!44444-44-444444-4444444-44-44-44-44-444444444444-44#113////////2///2////2////2//////}11!4444-444-44-4444444444-4444-444444-:++++++++++++++$&111@)1]                             ",
-"                           )33/*]1%44444444-44-4444444-444444444444444-44-44-44-444-4=11(/////2////////2////////////2/<1]*4-44444444444-44-44-4444-4444-44444++++++++++++++;;@111[/11]                            ",
-"                          ()~</}11*44-44-4444444-44-4444-44-44-44-4444444444444444444!11}/2////////2///////2/////2/////11@444-44-444444444444444444444444-44+++++++++++++++4_]11@//_1]                            ",
-"                          )3~///*11&444444444-44444444444444444444-44-44-44-44-44444$!112//2////2///////2///2/2/////2//@11444444444-44-44-44-44-444-44-4444+++++++++++++++4=1111(//|11]                           ",
-"                          )~(///<@11%4444-44444-44-44-444-44-4444444444444444444-4444*11/////2//////2//////////////////*11>4444-44444444444444444-44444444;++++++++++++++4#@111~///2*]]                           ",
-"                         ))_/////(111%-44444-444444444-44444444-4444-44-44-44-44444-4@1*/////////2//////2///////2///2//~11#4-44444-44-44-44-44-444444-444++++++++++++++:4#@111@2/2//311                           ",
-"                         )33//2///[11@=44-4444-44-444444-44-44444-444444444444444444411_2/2///2//////2////2//2/////////[11&444-44444444444444444-44-444$++++++++++++++$4%@]11*2/2}2/<1]]                          ",
-"                         )~}///2///~111&4444444444-44-44444444-4444444-44-44-44-4444#113///2//////2/////////////2///2//}11!444444-44-44-44-44-44444444;+++++++++++++:44&]111*2/2}}<//*1]                          ",
-"                        )[_/////////)111*>444-444444444-44-44444-44-4444444444444444,11(///////2/////2//2/////2///////2<11*44-44444444444444444-4444$++++++++++++++$4:_1111_2/|}}}|//)1]                          ",
-"                        )3[/////2//2/}@111&444-44-44-44444444-4444444-44-44-44-444-4!11}////2/////2////////2/////2//////@1@44444-44-44-44-44-444444:++++++++++++;444&@11113/2|}}}}}2/211]                         ",
-"                       ))_<//2///////22_111@,444444444-44-44444-44-4444444444444-44-*11//2////////////2////////////2////*11>444444444444444444-44;++++++++++++;444#@1]11@}22}}}}}}}<//*1]                         ",
-"                       )3~//////2///////(@111@,4-44-44444444-4444444444-44-44-444444@1*//////2//2//2////2//2//2/////2/2/~11=-44-444-444-44-444$:+++++++++++;4444,@1111@3/2|}}}}}}}}}//(1]                         ",
-"                       )3[////////2//////23@111@!%444-44-44444-44-44-44444444444444%]1_///2///2//////2//////////2///////[11&44444-444-444444$+++++++++++:$444%!@11111_</2|}}}}}}(}}}2//11]                        ",
-"                      )[_<///2/////////////23@1111*&>444444-44444444444-44-44-44444,11)2/////////2/////////2////////////|1]*44-44444444444;+++++++;;:444-4:,*111111_</2}}}}}}}}}}}}}<//_]]                        ",
-"                      )3~//2///2///2//2//////2)@11111*&%44444-44-44-44444444444-444!11<///2////2//2//2/2/////2///2//2////@1@4444-44-44$;+++++;::$44-444#&*111111@3//2|}}}}}}}}}}}}}}}//(1]                        ",
-"                      )~[///////2//////2//2/////|_11111]@!,%4444444444-44-44-44444$*1@//////2///////////2/////2///////2//*11%44444$:;+;:::$44444444%,!@1111111~(//2|}}}}}}}(}}}}}}}}}2//11]                       ",
-"                     ))~<////2//////2///////2//////(_@1111]1@*&=%4-444444444444444%11_//2/////////2///////2///////2//////311&444$:444444444444$#!_@]111111@_)2//<|}}}}}}}}}}}}}}}(}}}<//*1]                       ",
-"                     [3_//2//////2/////2/////2////////|3*11111111@*!&#>4-44-44-444,11(////2//2/2//////2////////2//////2//|1]*44444444444%#&!*@111]11111*~}////2}}}}}}}}(}}}}}}}}}}}}}}//)1]                       ",
-"                     )3)//////////////////2////2//////////}3_11111111111@*!!,##$44*1@/2///////////2////2///2///////2//////@11%44##,!!**111111111111*3(2////2|}}}}}}}}}}}}}}}}}}}}}}}}}2/21]]                      ",
-"                     [_|///2//2////2///2//////////2/2/2//2////2(3**111111111111111111_~3~~(}(}(}(|//2///2//////|(}(}(}(3~3*11111111111111111]@*3)|//////2|}}}}}}}}}}}}}}}}}}(}}}}}}}}}<//*1]                      ",
-"                    )3_/////////2////////////2/////////////2//////2/}}3~**111111111111111111111111111111111111111111111111111111111111@*_~)}2////////<||}}}}}}}}}}}}}}}}(}}}}}}}}}(}}}}/2[1]                      ",
-"                    )33////2///////2///2//2////2////////////////////////////(}(33_***111111111111111111111111111111111111111***~~3}}<2///////////2<|}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}2/<]1]                     ",
-"                    [~}//2///2///////2///////////2/2//2/2///2//2////<<22/2///////////////2}}}}}}}3333333~3~3~333(}}}(}}|//////////2///////2/22<|}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}2//@]]                     ",
-"                   )3_////////2/2//////2////2////////////2///////2////2|}|<<22/2///////////2/2/2///////////////////////////////////2///22<<|}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}//~1]                     ",
-"                   )33/////2//////2//////2////2/////2///////2//////2////2<}}}}}}||<<22///////////2/2//2//////2///2///2//2////2//2222||}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}(}}}(}}}}(}}}}}}}}2/(1]                     ",
-"                   3~)//2////////////////////////2///////2////2///////2////<}}}}}}}}}}(}(|||<<<<222222////2///////222222<<<|||}}|}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}2//@1]                    ",
-"                  )[_2///////2//2///2//2///2///2/////2//////////2///2////2///2<}}}}}}}}}}}}}}}}}|}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}|//*]]                    ",
-"                  [3~////2///////2//////2///2/////2////////2//////////2////2///2<}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}(}}(}}}}}}(}}}}}}}}}}}}//[1]                    ",
-"                  [~)//2///2/////////2////////////////2/2////2///2///////////2////<|}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}(}}}}}}}}}}}(}}}}2/|1]]                   ",
-"                  [~(////////2////2/////2///2//2///2//////////2////////2////////////2|}}}}(}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}(}}}(}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}<//@1]                   ",
-"                 [3_/////2/////2/////////////////2///////2////////2//////2////////////2<}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}(}}}}}(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}//_1]                   ",
-"                 [33//2////////////2////2///2//////2//2///2////2////2/////2//2/2/////////2}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}(}}}}}}}}(}}}}(}}}}(}}}}}}}}}}2/(]]                   ",
-"                 3~)//////2//2///////2////////2/////////////2/////////2//////////2/////////2|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}2/21]]                  ",
-"                 [_<///2////////2////////2////////////2////////2/2////////2////////2/2/2//2//2|}}}}}}}(}}(}}}(}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}|//@1]                  ",
-"                [3_///////2///2///2///2////2///2/2//2///2//////////2///2////2//2///////////////2|}}}}}}}}}}}}}}}(}}}(}}}}}}(}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}(}}}}}}}}}}}}//~1]                  ",
-"                333////2////////////////////2////////////2//2///////2////////////2/////2/////////2<}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}}(}}}}}2/)]]                  ",
-"                [~(//2/////2////2///2///2/////////2///2///////2//2///////2///2///////////2/2///////2<}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}</21]]                 ",
-"                3_|/////2////2///////2//////2//2//////////2///////////2//////////2//2///////2/////////<}(}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}|//@1]                 ",
-"               [3~///////////////2///////2//////////2///////2//2///2//////2///2////////2////////////////<}}}}}}(}}}}}}}}}(}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}}//~]]                 ",
-"               [~3///2//2/2///2///////2/////2////2/////2///////////////2////2////2//2////////2/2//2/2/////<}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}2/)1]                 ",
-"               3~(//////////2/////2///////////2//////////2///2///2///2//////////////////2/2///////////2////2<}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}</|1]]                ",
-"               3_|2/2/2////////2///2////2/////////2/2/////2///2////////2//2/2/2//2///2/////2///2////////2/////|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|//@]]                ",
-"              [3_///////2////2///////2////2/2///2/////2///////////2//////////////////////////////2//2/////////22|}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}}(}}}}(}}}(}}}}}}}}}}}}}}}}}(}}}}}2/_1]                ",
-"              33~/////////2////2//////////////////////////2////2/////////2////2///2//2/2////2/////////////2//////2}}}}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}(}}}}}}}}}}}}}2/3]]                ",
-"              3~)//2/2///////////2///2//2////2////2////2/////2/////2/2///////////////////2////2///2///2/2///2//////2|}}}}}}}}(}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}</}1]                ",
-"              3_}//////2/2/2/2/////2//////2////2////2/////2//////2//////2//2///2//2////////////2/////////////////////<}}(}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}(}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}}}|//1]]               ",
-"             [3_/////////////////2////2////////////////////////2///2//2///////////////2//2/2///////2//////2///2/////2//<}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}2/*]]               ",
-"             3~~/2/2/2////////2///////////2//2/2//2/2//2////2//////////////2///2///2////////////2//////2/////////2//////2<(}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}(}}}}22~1]               ",
-"             3~3///////2/2/2/////2/2//2/////////2////////2/////2///2///2///////////////2//2//2//////2//////2//2///////////2|}}}(}}}}}}}}(}}}}}}}}}}}}}(}}}}}}(}}}}(}}}}}}}}}}}(}}}}}}(}}}}}}}}</[]]               ",
-"             3~(///////////////2////////2//2/////////2//////////////////////2///2///2////////////2//////2/////////2/2/2/////<}}}}}}}}}}}}}}}}}{}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}|/|1]               ",
-"             3_|////2//////2//////2/////////2///2/2////2/2/2/2/2/2/2/2/2/2///////2////////2///2//////2/////2////2////////2////<}}}}}}}}{}}}}(}}}(}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}//1]]              ",
-"            33_//2/////2//////2/////2/2//2//////////2////////////////////////2//////2/2///////////2/////2///2/////////2/////2//2}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}2/*]]              ",
-"            33~/////2////2/2/////////////////2///////////2////////////////2////////////2/2/2///2//////2//////2/////2/////2///////<}}}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}(}}}}}}}}}}</~1]              ",
-"            3~3//2//////////////2/2////2//2////2/2//2/2////2///////////2/////2/2/2//////////2//////2////2/////////////2//////2////2<(}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}</(]]              ",
-"            3~(//////2//////2///////2///////////////////////2/2/2/2/2///////////////////////////2/////////2//2//2/////////2/////////2|}}}}}}}}}}}{}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}/}1]              ",
-"            ~_}///2////2//2////////////2//2/2/////////2/2///////////////2/2//////2/2//2//2///2/////2//////////////2////2/////2/2/2///2<}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}2/]]]             ",
-"           33_//////////////2/2/2///////////////2/2//////////////////2/////////////////////2/////////2//2///2///////2//////////////////2|}}}}}}(}}(}}}}}}{}}}}}}}}}}}(}}}}}}(}}}}}}}(}}}}}}}}}}}2/*]]             ",
-"           3~~/2/2//2//2//////////2/2///////2/2/////////2//2/2/2//2///////2/2/2/////2/2/////////2////////2/////2////////2/2///////2//////|}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}</_1]             ",
-"           3~3//22///////2////////////2/2//////////2//////////////////2////////2////////2//2/2////2///2////2////2//2/////////2/2////2/2///2|}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}|/3]]             ",
-"           ~~)//<///2///////2//2/////////////////2///2/////////2///2//////////////2////////////////2////////2////////2/////////////////2///2<}}}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}}/(1]             ",
-"           3_|//<//////2//////////2/2////2/2/2/////////2/2/////////////2/2/2///2//////2//2//2/2/2////////2///////2/////2/2///////2///////////2|}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}(}}}}}/21]]            ",
-"           ~_<//|////////2//2//2///////2////////////////////2////2/2/2////////////2////////////////2//2///////2///////////2/2/2////2////2/////2<}}}}(}}}}}}}{}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2/1]]            ",
-"          33_//2</2/2////////////////////////2/2/2/2/2////////2/////////////2///////2//2///////////////////2//////2/2////////////////2////2/////2|}}}}}}}}}}}}(}}}(}}}}}(}}}}}}}}(}}}}}}}}}}}}}}}</*]]            ",
-"          ~~~//<2/////2//2//////2///2////2//////////////2/2///////////2//2/////2//////////2/2/2////2////2//////2/////2//////////2////////////2////<}}(}}}(}}}}}}}}}(}}}}}}}}(}}}}}}}}}(}}}}}}}}}}|/~]]            ",
-"          3~)//|2//////////2/2////////2////2///////////////2///2////2///////2///2/2/////////////2////2////2/2///////////2//2/2////2////2///2///2///2}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}(}}|/3]]            ",
-"          ~~(//}///2////////////2/2////////////2/2/2/2///////2///2////2//2///////////2/2/////////////////////////2///2//////////////2///2///////2////|}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}/(1]            ",
-"          ~_|/2}/////2/2/2//////////2///2///2/////////2/////////////////////////////////2/2/2////2////2/2///2//////////////////2///////////////////2//<}}}(}}}}}}}}}}}}}}}}}}}}(}}(}}}}}}}}}}}}}}}221]            ",
-"          ~_</<|/////////////2//////////////////////////2/2////2//2/2//2//2/2/2///2///////////2////2/////2////2//2///2//2/2//2///2//2////2/2///2///2//22}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}22]]]           ",
-"         33_//||/2////////2////2/2///2///2///2//////////////2//////////////////2///2////////2//////////////////////2//////////////////2//////////2///////|}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}(}}}2/*]]           ",
-"         ~~~//|<///2///////////////////2////////2/2//2///////2///2///2//2/////////////2//2//////2////2////2//2///////////2/////2////////////2/////////2///<}}}}{(}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}/_]]           ",
-"         3~3//}<////2/2/2//2//////2//////2/2///////////2///////2//////////2////////2////////2/////2////2///////2/////2/////2/////2/2////2/2///////2/////2//2}}}}}}}}}}}}}(}}}}(}}(}}}}}}}}}}}}}}}}}/~]]           ",
-"         ~~)/2}2/////////////2//2///2/////////2////2/////2/2///////2///2////2/2/2/////2///////2/////////////2///2/2/////////2////////2//////2//2/////////2//2}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}/[]]           ",
-"         ~_(/<}2/////////2//////////////////////2////2///////2///2////2///2/////////////2/2/////2///2///2/2///////////2//2////2////////////////////2//////////|}}}}}}}}(}}}}}}}}}}}}}}}}}}(}}}}(}}}2(1]           ",
-"         ~_|/|}/2/2/2////////2///////2/2//2/2/////////2//2////////2//////////////2/2/////////2///2///2//////2//////2/////////////2////2/2//2//2/2/////2////2//2<}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}22]]           ",
-"        ~3_//}}///////2///2////2/2////////////2//2//////////2//////////2//2//2////////2////////////////////////2//////2////2///////2//////////////2/////2///////2}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}</1]]          ",
-"        ~~_//}(///////2////////////2///2//////////2//2//2////2/2////2//////////2///2/////2/2/2///2///2///2//2//////2////2/////2//2//////////2////////2////////2//2}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}<2*]]          ",
-"        ~~~/2}|/2//2////2//2/2///////////2/2///2//////////////////2////2/2//2//////////////////////////2/////2//2///////////2////////2/2/2////2//2//////2//2//////2|}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}|/*]]          ",
-"        ~~~/2}|/////////////////2///2///////2//////2//2///2////2////////////////////2/2///////2///2//////2//////////2////2///////2////////////////2///2////////2///2|}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}|/~]]          ",
-"        ~~)/<}|//2//2//2////2//2///2///2///////2//2/////2///////////2////2//2/2/2//////2/2//2///////2//////2//2///2///2///////2////2///////2///2////////////2////////<}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}/~]]          ",
-"        ~_)/|}|//////////2//////////////2//2///////2//////2//2///2////2///////////2////////////2////////////////////////2//2///////////2////2//////2///2/2///////////2<}}}(}}}}}}}}(}}(}}}}}}}(}}}}}/(]]          ",
-"        ~_|/|}<//2//2//2///2///2/2//2////////2//2/////2////////2/////////2//2/////////////2//2///2///2/2///2//2/2//////////////2////2///2/////////////////////2//2/////2}}}}}}}}}}}}}}}}}}}}}}}}}(}}2(1]          ",
-"        ~_}/}}</////////////2/////////2//2////////////////2///////2//2/////////2//2//2////////////2/////2///////////2////2//2////2///////////2//2///2/////2/2///////////2}}}}}}}}}}}}}}(}}}}}}}}}}}}22]]          ",
-"       ~~_//(}<//2//2//2///////2//2//2/////2//2////2////2////2//////////2//2//////////2//////2//////////////2////2////2//////////////2////2//////2////2////////2//2/2////2}}}}}}}}}}}}}}}}}}}}}}}}}}</]]]         ",
-"       ~~*/2}}<//////////2//2//////////2////////////2//////////2////2///////2//2//2/////2/2/////////2////2////2////2/////2////2///2////2////2///////////////2/////////2////}}}}}(}}}}}}}}}}}}}}}}}}}<2@]]         ",
-"       ~~~/2}}<//2///2/////////2//////////2///2//2///////2///////2///////2//////////////////2/2//2////2////////2///////////2///2//////////////2////2///2//2////////////////2|}}}}}}}}(}}}(}}}}}}}}}}</*]]         ",
-"       ~~~/<}}<///////2////2/////2//2//////2//////////2/////2/////////2//////////////2///////////////////2/2////2//2//2/////////////2///2////////2///2//////2//2/2//2///2////|}}}}}}}}}}}}}}}}}(}}}}|2*]]         ",
-"       ~_3/|}}</2//2/////2//////2/////2////////2///2/////2////2//2//2/////2/2/2/2/2///2/2////2////2////////////////////2//2/////2/////2///2//2////////////////////////2/////2/|}}}}}}}}}}}}}}}}}}}}}|/~]]         ",
-"       ~~)/|}}</////////////2////2/////2////2////////2/////////////////2//////////////////2////2///2//2//////2///2/2/////////2////2//////////////////2//2/////////2//////2/////|}(}}}}(}}}}(}}}}}}}}}/~]]         ",
-"       ~_)/}}}<//2///2////2/////////2///////////2///////2//2////2////2/////2/////////////////2//////////2/2//////////2//2//2////////2////2////2/2//2//////2/2/2/////////////////|}}}}}}}}}}}}}}}(}}}}/[]]         ",
-"       ~_|/}}}<///////2//////2///////////2//2////2//2///////2////2//////////2//2//2/2//2////////////2/////////2////2///////////2///////2///2///////////////////////2//2///2//2///|}}}}}}}}}}}}}}}}}}}/(]]         ",
-"       ~_}/}}(<///2/////2///////2////2/////////////////2///////////2///2////////////////2/2//2//2/////2////2////2/////2//////2///2///////////////2///2/2///////2///////2//////////|}}}}(}}}}}}}}}}}}}/(1.         ",
-"       __|2}|}<////2//////2//////2////2//2///2///2///////2////2//////////2//2//2////2////////////2//////2//////////2///2//2/////////2///////2/2/////////2//2////2//2///////2///2///|}}}}}}(}}}}}(}}}}22]]         ",
-"      ~~_//}}}<///////2/////2//////////////2///////2///2////2////2//2/////////2////////////2///////2////////2//////////////2///2//////2/2/////////2//////////2///////////2////////2/|}}}}}}}}}}}}}}(}221]]        ",
-"      ~_*/2(}}<2///2//////////2///2///2///////2///////////////////////2///2//////2////2/2/////2//////2///2///2/2///2//2/2/////////2////////////2////2///2///////////2/2/////2//2/////|}}}}}}}}}}}}}}}2/]].        ",
-"      ~~_/<|}}<////////2//2/////2///////2///////2//2////2////2////2/////2//////2//2////////2/////2///////////////2////////2///2/////2////2/2//////////////2////2/2////////////////////|}}}(}}}}}}}}}}2/@]]        ",
-"      ~_~/<}}}</2///2//////2///////2////////2///////2////2////2////2////////2///////////2/////2//////2///2/////////////////2////2/////2////////2//2////////2///////////2/////2//2//2///}}}}}}}}}}}}}}22*].        ",
-"      ~~~/<}}(</////////2/////2//////2//2/////2////////2/////////////2///2////2///2/2//////2///////2///////2///2///2/2//2//////////2////////2///////2/2///////2////2////2/2////////////2|}}}}}}}}}}}}</*.]        ",
-"      ~_~/<}|}|//2//2///////////2/////////2//////2///////2//2///2/////////2//////////////////2//2/////2/////2///////////////2///2//////2/2//////2//////2///2///2///////////////2////2////}}(}}}(}}}}}<2*].        ",
-"      ~_)/|}}}|///////2///2///////2////2///////2////2/////////2////2//2//////2//2////2/2/2//////////////2///////2/////2///2///2///////////////2//////////////////2//2///////2////2/////2/2|}}}}}}}}}}</~]]        ",
-"      ~_)/|}|(|/2//////////2//2/////2///////2/////////2//2////////////////2///////////////////2/2//2/////////2/////2//////////////2/2//////2/////2/2////2/////////////2//2//////////2/////2}}}}}}}}}}</~].        ",
-"      __)/|}}}|////2///2////////2///////2/////2/2//2////////2///2///2///2////2///2/2//////2//////////2///2///////2/////2///2///2//////2/2////////////2////2//2//2///////////2//2///////////2}}}}}(}}}</~1.        ",
-"      __[/|}}}(/////2//////2/////////2////2//////////2///2//////2//////////////////////2////2///2/////2///2///2/////2///2///2///////////////2////////////////////2//2///2/////////2/////2///<}}}}}}}}</~]]        ",
-"      ~_(/|}}}}//2//////2/////2///2//////////2///2///////////2///////2///2//2/2/////2////////2////2/////////2/////////////////2//2/2/////2///2/2//2////2///2//////////2///2///2/////2////////<}}}}}}}</[]]        ",
-"      __}/|(}}}2////2///2//////2//////2/2/////2///2//2/2//2//////2///2////////////2////2/2////////////2/////////2///2////2//////////2/2//////////////2///2///2////2/////////////////////2//2//<}}}}}}</(].        ",
-"      ~_}/}}}}}2///////////2//////2///////2////////////////////2/////////2///2/2/////////////2//2///////2/////2///////2////2//2/2///////2//2////2///////////////2////////2/2///2/2///2/////////<}}}}}2/(1]        ",
-"      _*|/}|(}}22////2/////////////2///2////2/////2///2//2//2////////2////2/////////2////2/////////2///////2/////2///////////////////2///////2////2//2//////2//////2//2///////////2/////2////2//|}}}}2/(].        ",
-"      __}/}}}}}<///2////2///2/2//////2////2///2/////////////////2//2//////////2//2/////////2/2//2////2///2/////////2///2////2////2////2//2////2////////2/2////2/////////////2///////2/////2//////|}}}2/(1.        ",
-"      __(/}}}}}|////////////////2/2////////////2///2//2//2///2////////2////2////////2/2///////////////2////2//2/////2////2////2///2///////2//////2//2///////////2//2///2/2////2//2///2////////2///2}<//(]]        ",
-"      ~_//(}}}}|////2/2//2////2//////2/////////////////////2/////2///////2///2//////////2////2/2//2/////////////2//////////////////////2////2//2//////////2//////////2/////2///////////2///2////2//////}]]        ",
-"     ~__//}}}|(}2//////////2///////////2//2/2///2/2////2/////2/////2///////////2/2////////2////////////2///2////////2/2///2///2///2/2//////////////2/2/2////2//2//2/////2////2///2//////2//////////2///21]        ",
-"     __*//}(|}}}////2///2/////2/2///2///////////////2////////////2////2///2//2/////2/2////////2//2//2////////2///2//////////2////////////2///2///2///////2/////////2///////////2////2///////2////2/////2]]]       ",
-"     __*//}}}}|(22///2////2/////////////2////2//////////2/2//2////////2////////////////2///2///////////2//////2////////2//////2//////2////2////////////2////2//2/////2///2///////2///////2////2////2///21].       ",
-"     ___//|}}}}}2///////2//////2//2//2/////2///2///2//2///////////2////////2//2///////////////2//////////2/////////2/////2//////2//////2//////2////2//////2//////2/////2///2/2///////2/////////////////21].       ",
-"     __*//<(}}}}|///2///////2/////////////////////////////2////2////////2////////2//2///2////////2//2/////2/////2///2/////////////2////////2////2///2//2/////2////////////////////2///2////2///2////2///].]       ",
-"     __*//|}}}}}|///////2//////2////2/2//2///2//2///2///2////2////2//2//////2/2//////////2/2/2/2//2///2/////2/////////2///2//2//////2//////////////////////////2///2////2//////2////////2////2////////2/]].       ",
-"     __*//|}}}}}}/2//2/////2/////2////////////////////////2//////////////2///////2//2/2//////////////////////2//2//////2///////2////////2///2///2//////2//2/////2////2//////2/////2////////////2/2/////21.]       ",
-"     __*//|}(|}(|2/////2//////////////2///2////2//2//2///////2///2///2///////2//////////////////2//2//2//2////////2////////2/////2///2////2///2///2/2///////2/////2//////2//////////2////2/////////2///21..       ",
-"     __*//|}}}}}}22//////2//2//2///2////////2////////////2////2///////2//2////2//////////////2/////////////////////2////2/////////2///////////////////////////////////2/////2//2//////2////2////////2///]]]       ",
-"     __*//<}}}}(|<///2////////////////2////////2////2/2////2//////2/////////2///2/2//2/2/2///////2/2//2///2//2/2/////2//////2//2//////2/2///2///2////2//2/2///2////2/////////////2///////////2///2////2/]..       ",
-"     __*//<}}}}|(|////////2/////2/2//////2/2////2/////////////2////2/////2/////////////////2///2///////2/////////////////2/////////2//////////////2/////////////2//////2/2///2////2///2/2/////2////////2]]]       ",
-"     __*//<}}}}}}}2///2/////2////////2/////////////////2///2/////////2///////2/////2///////////////2/////2//////2//2///2/////2////////////2///2///////2////2////////2//////////2////2/////2/////////2//21..       ",
-"     _**//2(}}}}}|</////2////2/////////2/////2///2//2///////2///2/////2///2////2//////2/2///2/////////2////2/2////////////2/////2///2//2///////////2////2////2///2////////2///////////////////2//2/////<]].       ",
-"      **</2|}}}(|(<//2/////////2//2//////2/////////////2//////2////2//////////2//////////2///2//2//2/////////////2///2////////2////////////2///2///////////////2/////2//////2/////2///2////2///////////(]]        ",
-"      _*}/2}}}}}}}|///////2//////////2/////2///2//2///////2////////////2///2/////2/2//////////////////2//2////2///2////2///2/////2///2//2///////2////2////2///////2////2///////2////////2/////2///2////(].        ",
-"      **|//}}}}}}(|2//2/////2//2//2/////////////////2//2//////2//2///2////////2/////2/////////2//2////////2//////////////2/////////2////////2/////2////2////2////////////2///2/////2////////////////2//(1.        ",
-"      _*}//(}}}}|(|<////2//////////2////2/2//2//2//////////2/////////////2////2////////2/2/2///////////2//////2///2////////2//2//////2///2////////////////////2///2/2/////2/////2///2///2//2///2///////[].        ",
-"      **3//||(|}}}}|/////////2///////2//////////////2///2/////2///2///2////2//////////////////////2/2////2/2////////2/2/////////2//////2/////2//2///2///2/2/////2/////2//////////////////////2///2/////~].        ",
-"      **3//||}}}}}|(2//2//2/////2//////////2////2////2////2/////////////////////2/2/2//////2/2//2/////////////2////////////2//////////////2//////2///2/////////////////////2////2///2///2///////////2/2~].        ",
-"      **~//|}}}}(|(|2////////2//////2//2/////2//////////////2/2///2///2//2///2///////2/2/////////////2/2////2///2//////2/////2///2//2/////////2////////////2//2///2////2/////2////////2///2////2//////2*..        ",
-"      **_//<(}}|}||(|//2/////////2//////2/////////2/////2//////////2//////2///2///////////////2///2//////2////////2/2/////////2////////2///2/////2///2//2///////////2///2/////////2/////////2////2////2*].        ",
-"      *@_//2|}}}}}(||2///2///2///////2//////2//2////2////////2///////////////////2//////2/2///////////////2//2/////////2//2///////2//////2//////////////////2///2/////////2///2/////////2//////////2//21..        ",
-"      **@///(|(}}}|(}<////2////2//2//////2/////////////2//2///2/2///2//2///2//2////2////////2//2///2//2/////////2///2//////////2////2///////2////2///2///2///2//////2///////2////2/2/2////////2///////<]..        ",
-"       *@<//}}}}}}}|}|///////////////2//////2//2///2/////////////////////////////////2/////////////////////2/2////2///2/2///2/////////2///////2////////2/////////2////2///////2/////////2//2////2/////(].         ",
-"       **(//|}}}}|(}|(2//////2///2/////2/////////////2////2//2///2//2///2//2//2//2///////2//2//2/2/2//2/2//////2//////////2//////2///////2////////2//////2////2////////2/2/2///2//////2////////////2//3].         ",
-"       *@)//|}}}}}}}}|<//2/////2///2/////2//2//2///////2//////////////2////////////2/2////////////////////////////2/////////2//2///2///2///2///2////2/////////////2//////////////2/2/////2///2///2///2_].         ",
-"       *@_//<}}}|(}|(}(///2/2/////////2///////////2/2/////2///2//2//////////2//2///////2/////////////////2//2//2///2/2/2/2//////////2///////2////////////2/2///2/////2//////2/////////2///2///2////2//*].         ",
-"       @@*//2}(|(|}}}||<//////2//2//2///////2//2////////2///2///////2///2////////2////////2//2////2/2///////////////////////2//2/////////2/////2//2///2//////2////2///2/2/////2////2/////////////////2]..         ",
-"       *@@2//|}|}}|(|(|(///////////////2/2///////////////////////2///////2///2//////2///2//////2///////2/2//2//2/////////2///////2///2/////////////2////////////2/////////2/////2/////2/2/2////2///2/}].          ",
-"        @*}//}}}}}}}}}|}2//2///2//2//////////2//2//2/2/////2//2//////2/////2///2//2//2////2//////////////////////2//2/2/////2//////2///2///2///2//////2//2/2//////2/////////2///////////////2////////3].          ",
-"        @@3//<(}}}|(|(|(|///2//////2/2///2/////////////2/////////2////2/////////////////////2///2//2/2///////////////////2////2/2////////2//2/////2//////////2/2/////2/2/////////2/2///////////2////2_].          ",
-"        @@_//<|}}}}}}|}|(//////////////2///2///2///////////2//2//////////2///2//2/////2///////////////////2/2/2////////////////////2/2/////////2////2//2//////////2//////2///2///////2/2/2///////2//2@..          ",
-"        @@@///(}}}}}|(}}|(////2//2///////////////2//2///2//////////2//////2///////2//////2//2/2/2////2//2///////2/2///2//2/2/////2//////2///2////////////2/2///2///////////////2////////////2///////|]..          ",
-"         @@|//|}}}}(|}|}(|2/////////2///2//2//////////2/////2//2/////2////////2/////2//////////////////////////////2/////////2///////2///////2//2/2/2//////////////2///2/2/2//////2/////2/////2///2/3].           ",
-"         @@3//<(}}}}|(}||(|2///2/////2//////2//2//2/////////////2/////2////2/////2/////2/2////////2//2////2//2////////2////////2////////2/2///////////2/////2////2/////////////2//////////2////2///2_].           ",
-"         @@_//<|}}}}}}}}}|}2/2////2/////2/////////////2//2//2//////2///////////2////2//////2///2///////2///////2////////2/2//////2////////////2/////////2/////2/////2///////2/////2/2///////2//////2@..           ",
-"         1@@2//}|(}}|(}|(|(|//////////////2//2////2//////////2/2////////2//2////2/////////////////2///////2//////2/2////////2//////2/2/////2///////2//////////////////////2////////////2/2/////2///}].            ",
-"          @@(//|}}}}}}}}|}|(<//2///2//2////////2//////2/////////////2/////////////2//2///2//2///////2///////2/////////////////2////////2///////2////2/2/2/2/2//2/2///2/2/////2/2////2////////////2/~..            ",
-"          1@_//<}}}|(}|(|(||(///2//////2//2/2//////2////2/2///2//2////2///2///2///////2////////2///////2//////2/////2/2//2//////2//////////2/2///2/////////////////2/////////////2/////////2//////2@..            ",
-"          1@@//2|(|(|}}}}|}(||//////////////////2////////////////////2//////2////2//2/////2/2///2/2/2/////2/////2//////////2/////2/2/2//2////////////////////2//////////2//2/////////2/2/2///2////}]..            ",
-"           1@(//|}|}}}}|(||(|(<///2//2//////2///////2//2/////2///2/////2//////////////2////////////////2//////////2///2//////2//////////////////////////2///////2////2////////2////2///////////2//~].             ",
-"           1@_//<}}}}(|}}}}||(|2///////2//2///2///2//////2/////2/////////2///2//2////2///2/////////////////2/2//////////2/////////////2//2//2/2/2/2/2/////2///////2/////////////2////////2///////2@].             ",
-"           11@///(}}}}}}|(|(||(|///2///////////////////////2////////2/////2///////2/////////2/2/////2///2//////2//2///////2//2/2//////////////////////2//////2///////2/2/2/2//////////2/////2////|]..             ",
-"            1@)//|}}}}(}}}}|}|}(<//////2////2//2///2/2///2///2///2////2///////2//////2//2/2/////2///////////////////2/2//////////2/2//////2/////////////2/////2/2////////////2///2/2////2//2//2//_].              ",
-"            11_//<|(|}}}}|(|(}||(<//2////2//2/////////////////2////////////2/////2////////////////2//2///2//2/////////////2//////////2/2///////2/2/2//////2/////////////////////////////////////2@..              ",
-"            111<//}|}}}}}}}}|}(|||/////////////2/////2///////////2//2///2//////2/////2///2//2/2///////2///////2/2/2////2//////2////////////2////////2/2//////////2/2//2//2/2/2/2////2///2/////2/)..               ",
-"             11~//<(}|(}}}}}}|}}(|(////2////2/////2///2//2/2//2////////////2/////2////2///////////2//////2/////////////////2////2/2////2/2///2////////////2/2//2///////////////////////////2///2*..               ",
-"             11*//<|}}}}}(|(|}(||(||/////2/////2////////////////2////2////////2//////////2////2////////////2///////2/2//////////////////////////////////////////////2//2////////2/2/2/2/2//////}]..               ",
-"             111(//|}}}}}}|(}||(|}|(<2//////2///2/////2////2/////2////2//2/////////2//////2///2///2/2/2/////////////////2//2/2////2/2////////2//2/2//2/2////2////2///////////2/////////////2///~].                ",
-"              11*//<(|}}}}}}}}}|(|}|(////2////////2////////////////////////2////2////2//////////2///////2///2/2/2///////////////////////2/2/////////////2/////2/////////2/2/////////////2////2<1..                ",
-"              111|//}}}}}}}}|(}||(||((<//////2//////2///2/2//2/2//2///2//////2////////2//2//2/////////////2/////////2/2/2////2/2/////2///////2////2////////////////2/2///////2////////////////3].                 ",
-"               11_//<}}}}(|}}}}(|}}|||(2//2////2////////////////////2////2//////2//2///////////2//2//2//////////2///////////////////////////////////2////2//2//2///////////////2/2/2//2/2//2/2@..                 ",
-"               111|//}}}}}}}}||(|(|(}||(</////////2///2///2///2/////////////2////////////2//2//////////2////2/////2///////2////2/2/2//2/2/2//2/2//////2/////////2/////2/2/2/////////////////2[...                 ",
-"                11_//<}}}}(}}}}}|}}|}(||(2//2//2////////////2///2////2////2//////2///2////////2//2//2////2////2/////2//2//////////////////////////2///////2///////2/////////2///////2///2///2@..                  ",
-"                111|//}}}}}}}}}|(}}}|(}||(<///////2//2//2////////2////2///////2////////2///2////////2/////2///////////////2/2//////2//////2////2///////2/////2/////2//////////2/2///////////3...                  ",
-"                 11_//|}}}}(|}(}|}(|}|}(||(2//2//////////////2//////////2///2////2///2////////2//2////2//////2/2/2///2/////////////////////////////2//////2////2/////2//2/2///////2///2///2/@..                   ",
-"                 111|//}}}}}}|}}}}|(}}||(||(|/////2///2///2///2//2/2///////////////////2//2//////2////2//2/////////////2////2/2/2////2/2////2//2/////2/2////2////2/////////////////////2///3...                   ",
-"                  11_//<}}}(|(|}}}}}}}(||(||(<2///////////////////////2///2///2//2///////////2//////////////2////2//2///2////////2///////2///////2////////2////2///2//2////2///2///2/////22@..                    ",
-"                  111(//|}}}}}|(}}}}}|(}|(||(|(<//2//2///2/////2///////2////////////2////2/////////2//2//2///2/////////////2///////2//////2//2/////2///2///2////////////2/////////////////~...                    ",
-"                   11*//<}}}}}}|}}(|}}|}}|}}||}|<//////////2/////2/2//////2///2//2////2//////2//2//////////////2//2//2///2///2///////2/////////2/////2///////2/2///2//2////2/2/2/2//2/2//<1..                     ",
-"                   111)//|}|(|(}}}}}}}}|(|(|(|(}(}/2///2//////2////////////2//////////////2///////2///2//2//2/////////2////////2/2////2/2//2///2//2/////2///////2///////////////////////2_].                      ",
-"                    11@<//}}}}}}}}}(}}}}}}}}|}|||(|<//////2/////2//2//2/////////2//2///2//////2///////////////2///2//////2///2/////2//////////////////2////2///////2//2/2/////////2///2/(1..                      ",
-"                    111~2/<}}}}}}}}}}}}}}|(|(|(}|(|(}/2////2////////////2////2//////2/////2////2///2///2//2///2///2//2////2///2//////2///2//2///2//2////////////2////////2/////2///////2*..                       ",
-"                     111|//|}}(|}}}}}(}}}}}}}}|}}|||(|</////////2///2/////2//////////////////////////2//////////////////2///////2//////2//////2////////2////2///////2//////2//////////23]..                       ",
-"                      11@2/2}}}}}}}}|}|(}}}}|(|(|(}}|(|(<////2///2///2////////2//2///2//2///2////2////////2//2///2///2//////2///2//2//////2////////2////2///2///2////2//2//////2/2/2//<1..                        ",
-"                      111[//<}}(|(|(|(||}}}}}}}}}|}}(|}|}|</////////////2//2//////////////2////2///////2///////////2//////2//////////2//////2///2//////////////////////////2/////////2*..                         ",
-"                       111|//|}}}}}}}|(|(|(}}}}|(}}}|(|(}|(|<//2//2//2/////////2///2//2//////////2//2/////2///2///////2/////2////2//////2////////////2///2///2//2//2///2/////////////)]..                         ",
-"                        11@///}}}}}}}}}}}}|}}}}}}}}}}}}}}}|}}|2///////////2//2///////////2//2////////////////2///2//////2//////2//////2/////2///2//2/////////////////2///2/2/2//2/22<1..                          ",
-"                        111~//2}}}}}}}}}|(}|(}}}}|(}}}}|(|(}}|(|22//2//2////////2//2/////////2///2///2//2//////////2//////////////2/////2////2/////////2///2////2//////////////////2*]..                          ",
-"                         111(//<}}}}}}}}}}}}}}}}}}}}}(|}}}|}}}}}(|<2///////2/////////2////2////////2//////2////2//////2//2//2///2///////////////2///2////2////2////2//2///////////23]..                           ",
-"                          11@<//|}}(}}}}}}}}}|(}}}}|}}}}|(|(}}}|}}|(|<22////2///2/////2///////2////////////2///////2//////////////2//2////2//////2/////////////////////2//2/2/2///(1..                            ",
-"                          111_///|}}}}}}(|}(|(|}}}}}}}}}}}}}}}(|(|(|}}||</////////2////////2/////2///2//2//////2////////2///2//////////2////2///////2//2///2///2////2////////////|@].                             ",
-"                           ]11~2//}}}}}}}}}}|}}|(|(}|(}}}}}}}}}}}}|(|(}}((|<<2/////2////2/////////2////////2////2///2////2////2///2//////////2///2//////////2////2/////2//////2/2_]..                             ",
-"                            ]11(//2}}}}}}}}}}}(|}}}}}|}}}}}(|}}}}}}|}}}}|}}}}||<2/////2////2//2///////2//////////////////////2//////2///2////////////2//2////////////2////2////23]..                              ",
-"                             111(///(}}}}}}}}}}}}}}|(|(}}}|}}}}}}}}}}}}}}}|(|(}}}(|<</////////////2/////2////2////2//2///2/////2/////////2///2////2///////////2///2////////////(]..                               ",
-"                              11*<//<}}}(}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|}(|(}||<22///2//////////2////2/////////////////2///2/////////2///////2//2//2////////2//2///2|1..                                ",
-"                              ]11@///<}}|(}}}}}}}|}}}}|(|(|(}}}}(|(|(}|(}}}}}}}}}}|}|}}}}}}}(}||<<222/2///////////2///2//2//2/////////2///2/////////2//////////2///2///////2/<@]..                                ",
-"                               ]11_///<}}}}}}(}}}}}}}}}}}}}}}}}}|}}}}}}|(|}}}}}(|}(|(|}}}}}}|}}}}}}}(|}}}||<22//////2/////////2///2/////////2///2///////2////////2////2////22*...                                 ",
-"                                ]11_///2}}}}}|(}}}}}}}}}}}}|(}}(}}}}|(}}}}}}}}}}}}}}|(}|(}}}}}}|(}}|}}}}}}}}|(}|<2///////2/////////2////2////////2//2////2//2/////////2////2_...                                  ",
-"                                 ]113///2}}}}}}}}}}(}}}}}}}}}|}}}}}}}}}}}(|(|}}}}}}}}}}}}}}}}}}}|}(|(|(|}(|(|}}}}}}|2//2////2//2//////2/////2/////////////////2////2//////2_]..                                   ",
-"                                  ]113///2}}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}|(}}}}}}}}}}}}(|(|(}}}}}}}}|}|}}}}}}}}}}}<2////////2///////2////2///2///2///2////////////2//23]..                                    ",
-"                                   ]11[///2|}(}}}}}}}}(}}}}}}(}}}}(}}}}}}}}}(|}}}}(}}}(|(|}|}}}}|}}}}}}}(|}(|(|(|}}(|}}}|2/////////2///////////2///////////2//2//2//////231..                                     ",
-"                                    ]113////<}}(}}}}}}}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(|22///2////2////2////////2//2/////////////2///3]..                                      ",
-"                                     ]11[////|}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}(|(|}}}}}|}}<//////////2////2////2//////2////2///2///2231..                                       ",
-"                                      .11[2///2}}}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|}}|(|(|(}|(}}(</2//2/////////2////////////2///////2///3]..                                        ",
-"                                       ]]1_////2|}}}}}}}}}(}}}(}}}}}}(}}}}}(}}}}(}}}(}}}}}}}(}}}}}}(}}}(}}}}}}}}}}}}}}}}}}|}}}}<//////2//2///////2//2/////////2/////<~]..                                         ",
-"                                        ]11_2////<}}}}}}}}}}}}}}}(}}}}}}}}|}(}}}}}}}}|(}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}|(}}}}|(}/2///////////2/////2//2///2///////2_]..                                          ",
-"                                         ]]1@2////<}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(|}}}}}}}}|/////2//2//2////2//////2////2//2<*]..                                           ",
-"                                          ]11@}2////<}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}|(}}}}}}}}}(/2///////////////2////////////<@]..                                            ",
-"                                           ]]11(/////2|}}}(}}}}}}}}}(}}}(}}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}(|}}}}}}}}}}}(|}}}(|}|///2//2//2/2//////2////2//2/(11..                                             ",
-"                                            ]]11~/2////<}}|(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}|///////////2//////2///////31...                                              ",
-"                                              ]]1*</////2<}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}(|}}}}(}}}}}}}}}}}}}}}}(|(|}}}}(|///2/////2///2////////2/<_1...                                               ",
-"                                               ]]11(/2////2}}}}}}}}}(}}}}}}}}}}(}}}}(}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}|}(|//2//2////////2//2///2|@...                                                 ",
-"                                                .]11~///////<|}}(}}}}}}}}}}}}(|}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}}}(|}}}}}}//////////2//2/////2/311..                                                  ",
-"                                                 ].]1@}2//////2|}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}|}}}}}}}|(}}}}}(<//2///2///////2///<_1...                                                   ",
-"                                                   ]]11~2///////<}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}(}}}}}}}}}(|}}}}}}}}}}(}}}}(|}}}}}}}}}</////////2/////22)@]..                                                     ",
-"                                                    ].]1@(/2//////2|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}|(}}}|(|//2//2/////2///<_]...                                                      ",
-"                                                      ]]]1_<2///////2<}}(}}}}}}}}}}}}}(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|////////////22)1]...                                                       ",
-"                                                       ]]]11~/2////////2|}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}(}}|(}|(|////2///2///(@]...                                                         ",
-"                                                         ]]]1@3/2////////2<|}}}(}}}}}}}}}}}}(}}}}}}}}}(}}}}}}}}}}}(}}}(}}}}}}}|}}}}}}}2/2////2//2|_1]]..                                                          ",
-"                                                           ]]]1@[2//2///////<<|}}}}(}}|(}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|(}}}}}}/////////|~1]...                                                            ",
-"                                                            ].]]1@3/2//////////<<}}|}}}}}}}}}}(|}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}</2///2/|_11...                                                              ",
-"                                                              .]]]1@[<2//2//2/////2<|}}}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}(}}}}}}}}}}}}|///2//(~1]...                                                                ",
-"                                                                ..]]11_|////////////2/<<|}}}}}}}}}}}}}(|}}}}}}}}}}}}}}}}}}}}}}(|(|(2////2(_11...                                                                  ",
-"                                                                  .]]1]1*32/2/////////////2<|}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}}}|///2|3@]....                                                                    ",
-"                                                                     ...]11_)22/2//////2/////22<<|}}}}}}}}}}}}(}}}}(}}}}(}}}}}}<2/22)*@1]]..                                                                      ",
-"                                                                       ...]]11_)/2/2////////////////2<<|}}}}}}}}}}}}}}}}}}}|<<//2[_11.....                                                                        ",
-"                                                                          ..]]]]1*3(2/2/2/////////2////////222<<<<<<<<222///2|3*1]]....                                                                           ",
-"                                                                             ....]111@~(<2/2///2////////2///////////////2)~_1]].....                                                                              ",
-"                                                                                ....]]]1]1@_3)(2222/2/////////2222<)[_*@]]].]....                                                                                 ",
-"                                                                                    ....]]]]1]111@@**_~_~~_~_*@*11]]]].......                                                                                     ",
-"                                                                                        .........]]]]]]]]]]]]]]].........                                                                                         ",
-"                                                                                               ....................                                                                                               ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  ",
-"                                                                                                                                                                                                                  "};
diff --git a/perl-install/pixmaps/mouse_3b_mini.xpm b/perl-install/pixmaps/mouse_3b_mini.xpm
deleted file mode 100644
index d7ecefe60..000000000
--- a/perl-install/pixmaps/mouse_3b_mini.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * mouse_3b_mini_xpm[] = {
-"105 175 33 1",
-" 	c None",
-".	c #0C1834",
-"+	c #FE9A02",
-"@	c #303C5D",
-"#	c #AB8128",
-"$	c #E7A418",
-"%	c #DAA22A",
-"&	c #95742E",
-"*	c #E6A929",
-"=	c #747C98",
-"-	c #62543B",
-";	c #F7B01E",
-">	c #FEA005",
-",	c #B7944C",
-"'	c #ACAECB",
-")	c #816834",
-"!	c #7C85A3",
-"~	c #AFB2CF",
-"{	c #A28C5E",
-"]	c #5F6A8B",
-"^	c #E2A62E",
-"/	c #14254C",
-"(	c #424E6E",
-"_	c #FEB212",
-":	c #BABEDA",
-"<	c #6B7491",
-"[	c #848BA9",
-"}	c #9A9ABE",
-"|	c #D6A236",
-"1	c #A6A8C7",
-"2	c #9FA0C0",
-"3	c #515D7F",
-"4	c #CB9420",
-"                                                ]]}3.                                                    ",
-"                                                3]}(.                                                    ",
-"                                                ]<}@.                                                    ",
-"                                                3=}@.                                                    ",
-"                                                3=}/                                                     ",
-"                                                3!}/                                                     ",
-"                                                3!}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                3[}.                                                     ",
-"                                                ([}.                                                     ",
-"                                                (}}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                (!}.                                                     ",
-"                                                (!}/                                                     ",
-"                                                (=}/                                                     ",
-"                                                (=}@                                                     ",
-"                                                ]<}@.                                                    ",
-"                                                ==}<@@                                                   ",
-"                                               !!}}}!@/                                                  ",
-"                                               3}}}}}[/                                                  ",
-"                                               (}}}}}}/                                                  ",
-"                                               @}}}}}}(.                                                 ",
-"                                               ([}}}}}3.                                                 ",
-"                                               (!}}}}}<.                                                 ",
-"                                               3!}}}}}!/                                                 ",
-"                                               ](@@@@@@/(                                                ",
-"                                           '2}[]3<]==<]3]]===                                            ",
-"                                         2}[2'::~'~1111'':1}=]]]                                         ",
-"                                      ~2[=(:22}}}}}}}}}}}}2:[/3(]3                                       ",
-"                                     2[,_$/}1}}}}}}}}}}}}}}2(@_%-(33                                     ",
-"                                   '[,;___(]'}}}}}}}}}}}}}}}/)___4(((                                    ",
-"                                  2[^_;>__)@:}}}}}}}}}[}}}}!/#_____&@((                                  ",
-"                                ~}{_>+++__#/:1}}}}}}}}}}}}}</$______4@@@                                 ",
-"                               '[,;>+++>__4/~~}}}}}}}}}}}}2]/________;-@@                                ",
-"                              1!%>+++++___*/}:2}}[}}}}}}}}13@_________;)@@                               ",
-"                             2!*>+++++_____/[:'}}}}}}}}}}}1@-_________;;)/@                              ",
-"                            1!$++++++______@=::}}}}}}}[}}}~@-____________)//                             ",
-"                           2!%++++++_______(]::'}}}}}}}}}}:/&_____________)@/                            ",
-"                          1!%>+++++>_______-3:~:}}}}}}}}}}:/)______________-//                           ",
-"                          [,>+++++_________-3:::2}[}}}}}}}1/#_______________(//                          ",
-"                         }{>+++++>_________)3:::~2}}}}}}[21/#_______________$@//                         ",
-"                        }=_+++++;__________)(~:::2}}}}}}}}1/4________________4//                         ",
-"                       2!$+++++>___________)(:~::~}}}}}}}2}/4_________________&//                        ",
-"                       [4>++++_____________&(:::::2}[}}}}2[/4__________________(//                       ",
-"                      }{;++++>_____________#@~::~:~2}}}}}2}/%__________________$//                       ",
-"                     }=*++++_______________&@::::::2}}}}}}}/*________________>__&//                      ",
-"                     !4>+++>_______________#@~:::::~}}}}}}[/$_________________>__(/.                     ",
-"                    [!_+++>________________&@:~:~:::2}}[}2!/*__________________>_%//                     ",
-"                    =*>++>_________________#@:::::::~}}}}}!/%__________________>>_)/.                    ",
-"                   [{_++>__________________&@~:::~:::'}}}}!/*__________________;+;;//                    ",
-"                  }<;++>___________________#@::~::::::2}}}!/*___________________++_&//                   ",
-"                  !,;+>____________________&@::::~:::~:}}1[/*___________________>+>;@/                   ",
-"                 [=_+>_____________________&@~:::::::::~1~}/$___________________>>+;&//                  ",
-"                 !,;>______________________)(::::~:::~::::}/|___________________;+++_@/                  ",
-"                [=_>;______________________)(:~:::::::::::}/4____________________+++>#./                 ",
-"                [{_>_______________________-(::::~::~:::~:1/,___________________>++++;@.                 ",
-"                <__________________________]3::~::::::::::~/#____________________++++>&//                ",
-"               !#__________________________(]:::::::~:~::::/#___________________>+++++;/.                ",
-"               <|;_________________________@]::::~:::::~:::@)___________________>+++++>-/.               ",
-"              [(4__________________________@!:~:::~:~::::::@)__________________;++++++>-//               ",
-"              =@)__________________________.[:::::::::::~::((__________________>++++++>///               ",
-"             !<<@_________________________%/}:::~::::~:::::](_________________>+++++++#/@3.              ",
-"             ![~/)________________________,/':~:::::::~::::</_________________+++++++$//[2/              ",
-"             <~:[/,_______________________&/::::~:~::::::::[/________________+++++++>(/3::@.             ",
-"            !<:::</#______________________)@::::::::~::~:::1/,______________++++++>$@/3~2:</             ",
-"            =}::::!/3_____________________(3:~::::~:::::::::/{____________++++++>_#//]'}}1'.             ",
-"            ]~:::::2(/)___________________@<:::~:::::~:~:~::@)___________>++++>_#(/@[12}}}:(.            ",
-"           !=::~:::::!@@]|_______________%/}:~::::~:::::::::3(________>++>>>_$&@//=~2}}}}}~=/            ",
-"           =}:::::~::::!(/@],*___________#/~:::::::::::~::::</________>__;4)@//([~2}}}}}}}1'/            ",
-"           ]~::~::~::::::'=3/@@3&,*______-(::~:~::~:~:::::::'/,_____$4&)@///(=''2}}}}}}}}}2:@.           ",
-"          ==::::::::~::::::::2=3(///@(-)&/3}}1111::::::~121}[@(&)-@////@3=2::1}}}}}}}}}}}}}~=/           ",
-"          =[::::::::::~:::~:::::::~[!<3(@@/////////////////////@(3]=[2::~'1}}}}}}}}}}}[}}}}11.           ",
-"          ]~:~:~::~::~:::~::::~:::~''~~:::::~1112[}[[}[}111~::::~:::~'122}}}}}}}}}}}}}}}}}}2:@.          ",
-"         =<::::::::::::::::~::::::::~1}}2221'~~~:~:::::::~:~~~''112}}}}}}}}}}}}}}}}}}}}}}}}}~].          ",
-"         =[:::::~::~:::~:::::~::~::::::12}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}[}}}}'[/          ",
-"         ]1~:~:::::~::::~::::::::::::::::~2}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1~/          ",
-"         ]::::::~:::::~::::~::~:~:~:~:~::::~1}}}}}}}}}}[2}}}}[}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}:(.         ",
-"        ==::::::::::::::~::::::::::::::::::::~1}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}[}}}}[}}}}}}}}}}'<.         ",
-"        <[:~::::::~:::~::::~::::~::::::~:~:::::~12[}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}}}}}}[}}}}}1}.         ",
-"        <1:::~:~::::::::~::::~::::~:~:::::::::::::'}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2:/         ",
-"        ]::::::::~:~:::::::::::::::::~::::~::::::::~'2}}}}}}}}}}}[}}}}}[}}}}}[}}}}[}}}}}}}}}}}:(.        ",
-"       <=::::~:::::::~:::~::::~:::::::::::::~:~:::::::'}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}'].        ",
-"       <[:~::::~:::::::::::~:::~:~:~::~:~::::::~::::~::~'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1[/        ",
-"       ]1::~:::~::~:~:::::::::::::::::::::~::::::~::::::~:1}}}}}}}}[}}}}}[}}}}}}[}}}}}}}}}[}}}2~.        ",
-"       ]::::::::::::::~:~::~:~::::::~:~::::::~::::~::::::::~2}}}}}}}}}[}}}}}[}}}}}}[}}}}}}}}}}}:@        ",
-"      <]:::::::~:::~:::::::::::~::~::::::::~:::~::::~::::::::'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}'3.       ",
-"      <!~::::::::~::::::~:::::::::::::~:~::::::::::::~:~::::::~1}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1=.       ",
-"      <[::~:~:::::::::~:::::~:::~:~::::::::~::::~:::::::~:~:::::~2}{}}}}[}}}}}}}[}}}}[}}}}}}}}}2}.       ",
-"      ]1:::::::::::~::::~::::~::::::~:::~:::~::::~:~::::::::~:::::~2}}}}}}}}[}}}}}}}}}}}}}}[}}}}~/       ",
-"      ]:::~:~:~:~:::::::::~:::::::~:::~:::::::~::::::~:::~::::::::~:2}}}}}}}}}}}}}}}}}}}}}}}}}}}~@       ",
-"      ]:~::::::::~::~:~::::~:~::::::::::::~::::~:::::::::::~::~:~::::~}}}}}}}}}}[}}}}[}}}}}}}}}}'(.      ",
-"     ]!:~:::::::::::::::~::::::~::~:::~:~:::~:::::~::~::~::::::::::::::2}}}}}}}}}}}}}}}}}}}}}}}}1].      ",
-"     ][~~:~:~:~:::~::::::::::::::::~::::::::::::::::::::::~::~::::~:::::'}}}}}}}}}}}}}}}}}}[}}}}2[.      ",
-"     ]2':::::::::::::~:::~:::~:~::::::::~:::::~:~::~:::~::::::::::::~::::~}}}[}}}[}}}}[}}}}}}}}}}2.      ",
-"     ]~1:::::~:~:::~::~:::~::::::~::~::::~:~:::::::::~:::~::~::~::~:::~::::'}}}}}}}}}}}}}}}}}}}}}~/      ",
-"     3:2~:~::::::~::::::::::::::::::::::::::::::~:~:::::::::::::::::::::::::~}}}}}}}}}}}}}}}}}}}}'@      ",
-"     <:1::::::::::::~:~:~:~::~:~::~:~::~:::~:~:::::::::~::~::~:::::~::~::~::::2}}}[}}}}[}}}}[}}}}1(.     ",
-"    ]<'1::~:~::~:~:::::::::::::::::::::::::::::::~::~:::::::::~:~::::::::::~:::2}}}}}}}}}}}}}}}}}13.     ",
-"    ][11::::::::::::::::::~::~::~:::~:::~:::::::::::::~::~:::::::::~::~::::::~::'}}}[}}}}}}}}}}}}2<.     ",
-"    ][1':::::~::::~::::~::::::::::::::~::~:~:~:~:~:~::::::~:~::::::::::::~:::::::~}}}}}}[}}}}}}}}}[.     ",
-"    ]22'::~::::~:::~::::~:~:::~::~:::::::::::::::::::~::::::::~:~::::~:~::::~::~::~2}}}}}}}}}[}}}}}.     ",
-"    3'}~~:::~::::::::~::::::::::::::~:~::::~:~::~::::::~::::~:::::~:::::~::::::::::~}}}}}}}}}}}}}}'.     ",
-"    3:}~::::::::~:::::::::~:~::~:~::::::~:::::::::~::::::~::::~:::::::::::~::~::~::::2}}}[}}}}}}}}~/     ",
-"    ]~}~::~::~:::~:~::~::::::::::::::::::::::~:~:::~::~:::::~:::~::~::::::::::::::::::2}}}}}}}}}}}~/     ",
-"    ]~}~::::~:::::::::::~::::~:::~:::~::::::::::::::::::~:::::::::::~::~::::~::::~::~::1}}}}}}}[}}~(     ",
-"   ]<1}~~:::::~::::~::~::::~:::::::~::~:~:~::::~:::::~:::::~:::::~:::::::~::::~:::::::~:2}}}}}}}}}1(.    ",
-"   ]=1}~::~:::::~::::::::~::::~:::::::::::::~::::~:~:::~::::~:~::::::~:::::::::::~:::::::2}}}}}}}}13.    ",
-"   3!1}~::::::~::::~::~::::::::~:~:~::~:::~:::~:::::::::::~:::::::~:::~:::~:::~::::~:::~::2}}}}}}}1].    ",
-"   ][1}~:~:~:::::::::::~::~:~::::::::::~::::::::::::~:~:::::~::~:::::::~:::~:::::::::~:::::2}}}}}}2=.    ",
-"   3[}}'::::::~:~::~:::::::::::::::~::::::~::~:~:~:::::~::~::::::~:~::::::::::::~:::::::~:~:2}}}}}1=.    ",
-"   312}':::~:::::::::~::~::::~:~:::::~:::::::::::::::::::::::~:::::::::~:~::~:~:::~:::~::::::}}}}}2}.    ",
-"   3}}}'~:::::::~:::::::::~::::::::::::~::~:~::::~:~:::::~:::::::~::~::::::::::::::~::::::~:~:}}}}1[.    ",
-"   31}}1::~::~:::~:~::~::::::::~:~:~:::::::::::~:::::~:~::~:~:~::::::~::~:~::~::~:::::::~:::::~}}}22.    ",
-"   (~}}2:::::::::::::::::::~:~:::::::::~::::~:::::~:::::::::::::::~::::::::::::::::~:~:::::::::~}}11.    ",
-"   3'}}2::~::~:~::::~::~:~:::::::~::~::::~::::::::::~::::~:::~:~:::~:::::~::~::::~::::::::~:::::~2'1.    ",
-"   3~}}}::::::::::~::::::::::::~:::::::~:::~::~::~::::~:::::::::::::::~:::::::~::::::~:~::::~::::::~.    ",
-"   (:}}}~:~:::::~::::~:::~::~:::::~:::::::::::::::::::::~:~:::~:~::~::::::~::::::::~:::::~::::~::~::.    ",
-"   (:}}}~:::~:~:::~::::~::::::::::::~::~::~::~::~:~::~::::::::::::::::~:~::~::~:~:::::~::::~::::::::.    ",
-"   (:}}}':::::::::::::::::~::~:~:::::::::::::::::::::::~::~:~::~:~:~:::::::::::::::::::::::::~:::::~/    ",
-"   (:}}}2:~:::~:::~:~::~:::::::::~::~::~::~::~:::~::~::::::::::::::::~::~::::~::~::~:::~::~::::~:~::.    ",
-"   (:1}}}::::::~::::::::~::~:::::::::::::::::::~::::::~:::~::~::::::::::::~::::::::::~::::::~::::::~.    ",
-"   (:2}}}~:~::::::~::~:::::::~:~:~::~::~:~::~::::::~:::~:::::::~:~::~::~::::~::~::~::::::~::::::~:::.    ",
-"   ('1}}}~:::~:::::::::~:~:::::::::::::::::::::::~:::::::~::::::::::::::::::::::::::~::~:::~::::::~1.    ",
-"   (11}}}2:~:::~:~::~::::::::::::~::~::~:~::~:~:::::~:::::::~:::~::~::~:~::~::~::~::::::::::~::~:::2.    ",
-"   (}~}}}}::::::::::::::~:~:~:::::::::::::::::::::::::~:~:::::~::::::::::::::::::::~::::~::::::::::[.    ",
-"   @[~}}}}~~::~:::~::~::::::::~::~::~::::~::::~:~::~:::::::~::::~::~:::~::~::~::~::::~::::::~::~:::=.    ",
-"   (!~}}}}1:::::~:::::::::~:::::::::::~::::~:::::::::~:::~:::::::::::~::::::::::::~::::~::~::::::~:].    ",
-"   @]:2[}}}::~::::~::~:~::::::~::~::~::~:::::::~::~:::~::::::~::::~::::::~::~::~::::::::::::::~::::(.    ",
-"   @3:}}}}}1:::~::::~:::::~:::::::::::::::~::~::::::::::~::~:::~:::::::~:::::::::~::~:~:::::~:::::~@     ",
-"    @:1}}}}2:::::~::::::~:::~:~::~::~::~:::::::~:::~::::::::::::::~:~::::::~::~::::::::~:~:::::~::~.     ",
-"    @2~}}}}}~~::::::~::::::::::::::::::::~:::::::~:::~:~::::~:~::::::::::~::::::~::~:::::::::::::~[.     ",
-"    /!:}[}}}2:~::~::::~:~:~:::~::~:::~:::::~:::::::::::::~:::::::~::~:~::::::~:::::::::::~:~::~:::].     ",
-"    @3:}}}}}}~:::::~::::::::::::::::::::~::::~:~::~::::::::::::~:::::::::::~:::~::~::~::::::::::::@.     ",
-"     @:1}}}}}2:~::::~::::::~::~::~:~:~:::::::::::::~:~::~:~:~::::::~::~:~:::::::::::::~:::~::~:~:~.      ",
-"     /}~}}}}}}1:::::::~:~::::::::::::::~::~:::~::::::::::::::::::~::::::::::~:::~::~::::~::::::::!.      ",
-"     /]~}}}}}}2~~::~:::::::~::~::~::~::::::~::::~:::~::~::::~:~::::~:::~:~:::~::::::::::::~::::~:(.      ",
-"      @:1}[}}}}2:::::~::~:::::::::::::::~:::::::::~::::::~:::::::::::~:::::::::~::::~:::::::~:::'/       ",
-"      /[~}}}}}}}~~:::::::::~::~::~:~:~::::::~::~::::::~::::~:::~:::::::::~::~::::~::::~:::::::::=.       ",
-"      /3:}}}}}}}}~::~::::::::::::::::::~::~:::::::::~::::::::~:::~:~:::~::::::~::::~::::~:~::~:~@.       ",
-"       /~1}}[}}}}}~::::~:~:~::~:::~:::::::::~::~:~:::::~::~:::::::::~::::::~:::::::::::::::::::2.        ",
-"       /<:}}}}}}}}2~:~:::::::::::::~::~:::::::::::::::::::::~::~:::::::::~:::~::~:~::~:::~::~::3.        ",
-"        /~1}2[}}}}}}:::::::~::~:~:::::::~::~::~::~:~::~::~::::::~:::~:~:::::::::::::::~:::::::1.         ",
-"        /=~}}}}}}}}}}~::::::::::::~:~::::::::::::::::::::::~::::::~::::::::~::~::::~::::~::~::3.         ",
-"        /@~1}}}}}}}}}}~:~::~::~:::::::::~::~::~:::~::~::~:::~:::::::::~:~:::::::~::::::::::::1.          ",
-"         /<:}}[}}}}}}}}~:::::::~::~::~::::::::::~:::::::::::::~:~:::~:::::~::~::::~::~:~::~::3.          ",
-"          /1'}}}}[}}}}}}1~:~::::::::::::::~::~::::~::~::~::::::::~:::::~::::::::::::::::::::}.           ",
-"          /3:}}}}}}}}}}}}2~::::~:~::~::~::::::::::::::::::~:~::::::::::::~::~::~:~::~:::~::~@.           ",
-"           /[~}}}}}[}}}}}}}1~~:::::::::::~::~::~::::~::~:::::~:::::~::~::::::::::::::~:::::!.            ",
-"           /@~1}}}}}}}}}}}}}21:~:::~:::::::::::::~:::::::~:::::~:~::::::~::~::~:::~::::~::1/.            ",
-"            /3:}}}}}}}[}}}}}}}}'~::::~::~::~::~::::~::~::::::::::::::~:::::::::~:::::::::~(.             ",
-"             /[:}}}}}}}}}}}}}}}}}2':~:::::::::::~:::::::~::~::~:::~::::~::~:::::::::~::::<.              ",
-"             //1~}}}}}}}}}}}}}}}}}}}1':~::~::~:::::::~:::::::::~:::::::::::~:::~:~::::~:}..              ",
-"              /@~'}}}}}[}}}}}}}}}}}}}}}21~~::::~::~::::~::~::::::~::~:~::::::~:::::::::'@.               ",
-"               /(:1}}}}}}}}}}}}}}}}}}}}}}}}}211~~~:::::::::~:::::::::::~::~::::::~:~::~@.                ",
-"                /3:1}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}22'~::::~:~::~:::::::::::~::::::~3.                 ",
-"                 /]:'}}}}}}[}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}1~:::::::~:::~:::~::::::::~].                  ",
-"                  /<:'}}}}}}}}}}}[}}[}}}}}}}}}}}}}}[}}}}}}}}2~:~:::::~:::~:::~:~:~::].                   ",
-"                   /<:~}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}}}2:::~::::::::::::::::].                    ",
-"                    .3::1}}}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}~::::~::~:~:::::~:3.                     ",
-"                     /(~:'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}}}}~~::::::::~:~::~(.                      ",
-"                      .@2:~1}[}}}}}[}}}}}}}}}}}}}}}}}}}}}}[}}}}}}}:~::~::::::::1@.                       ",
-"                       ./!::~2}[}}}}}[}}}}}}}}}[}}}}}}}}}}}}}}}}}}2::::~::~:::[/.                        ",
-"                        ./3~::~2}}}}}}}}}}}}}}}}}}}[}}}}}}}}}[}}}}}~::::::::~]..                         ",
-"                          //[:::'2}}}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}~~::~:~:}@.                           ",
-"                           ./(1:::~1}}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}~:::::'3..                            ",
-"                             ./31:::~1}}}}}}}}}[}}}}}}}}}}}}}}}}}}}~~::~=/.                              ",
-"                               ./32::::~12}}[}}}}}}}}}}}}}}[}}}}}}1::~</..                               ",
-"                                 ./([::::~:~'2}}}}[}}}}}}}}}}[}}}':2]/..                                 ",
-"                                   ../3}::::::~~'122}}}}}}}}}2211<@..                                    ",
-"                                      ../(<}~::::::~:~~'~~~~1!]@...                                      ",
-"                                         ....@(3<=[[[[[<]3@/....                                         ",
-"                                              .............                                              ",
-"                                                                                                         ",
-"                                                                                                         ",
-"                                                                                                         "};
diff --git a/perl-install/pixmaps/mouse_left.xpm b/perl-install/pixmaps/mouse_left.xpm
deleted file mode 100644
index 13fce0362..000000000
--- a/perl-install/pixmaps/mouse_left.xpm
+++ /dev/null
@@ -1,142 +0,0 @@
-/* XPM */
-static char * mouse_left_xpm[] = {
-"59 91 48 1",
-" 	c None",
-".	c #AFB0CD",
-"+	c #A7A9C8",
-"@	c #9FA1C0",
-"#	c #9A9ABE",
-"$	c #848CAA",
-"%	c #697392",
-"&	c #7B84A1",
-"*	c #122450",
-"=	c #757C94",
-"-	c #BABEDA",
-";	c #4D283C",
-">	c #B52E19",
-",	c #5C2937",
-"'	c #C42F14",
-")	c #FF3300",
-"!	c #D3300F",
-"~	c #302646",
-"{	c #4A5778",
-"]	c #7A2B2D",
-"^	c #21254B",
-"/	c #892C28",
-"(	c #E1310A",
-"_	c #FF4000",
-":	c #FF6000",
-"<	c #FF7300",
-"[	c #FF7900",
-"}	c #972C23",
-"|	c #FF5900",
-"1	c #FF8000",
-"2	c #FF9900",
-"3	c #FF4D00",
-"4	c #3E2741",
-"5	c #FF8C00",
-"6	c #FF9300",
-"7	c #3E4862",
-"8	c #6B2A32",
-"9	c #F03205",
-"0	c #FF5300",
-"a	c #FF3900",
-"b	c #FF4600",
-"c	c #FF8600",
-"d	c #FF6600",
-"e	c #5C6888",
-"f	c #FF6C00",
-"g	c #A62D1E",
-"h	c #11244D",
-"i	c #253359",
-"                                                         .+",
-"                                                      .++@@",
-"                                                    .++#$%&",
-"                                                 .***$=$@--",
-"                                               .******&---.",
-"                                             .****;>,**--##",
-"                                           .****;'))!**=-@#",
-"                                          ****;')))))~*{-.#",
-"                                        .***~')))))))]**--#",
-"                                       .**^/)))))))))>**$-.",
-"                                     .***;()))_:<[_))(**=-.",
-"                                    .**^})))|122223)))^*{--",
-"                                   ***4!))|5222226))));*7--",
-"                                 .***89)052222222|))))]**--",
-"                                .***})_1222222221)))))/**+.",
-"                               .**^')|6222222226a)))))'**#-",
-"                              .**~!a<2222222226b))))))'**=-",
-"                             +**49bc2222222222|))))))))**%-",
-"                            +**49b62222222222d)))))))))**e.",
-"                           +**49|22222222222<))))))))));*7-",
-"                          +**49|22222222222<)))))))))));*7-",
-"                         +**49|22222222222ca))))))))))),**-",
-"                        +**49|22222222222ca))))))))))))/**-",
-"                       +**49|22222222222ca)))))))))))))/**-",
-"                      +**^(b22222222222ca))))))))))))))}**-",
-"                      **^!b622222222226b)))))))))))))))'**#",
-"                     ***>a522222222226b))))))))))))))))'**#",
-"                    +**})122222222226b)))))))))))))))))'**#",
-"                   @**8)f22222222226b))))))))))))))))))(**$",
-"                  @**49|22222222226b))))))))))))))))))))**$",
-"                  **^!_62222222226b)))))))))))))))))))))**%",
-"                 @**>)c2222222226b))))))))))))))))))))))**e",
-"                @**])d22222222220)))))))))))))))))))))))**%",
-"               @**4932222222222|))))))))))))))))))))))))**e",
-"               ***!a5222222222|)))))))))))))))))))))))))4*%",
-"              @**/)f222222222|))))))))))))))))))))))))));*e",
-"             @**;)3222222222|)))))))))))))))))))))))))));*{",
-"             **^()c22222222|))))))))))))))))))))))))))));*7",
-"            #**/)d22222222|)))))))))))))))))))))))))))));*7",
-"           #**4)_62222222|))))))))))))))))))))))))))))));*7",
-"           #**!)[2222222:)))))))))))))))))))))))))))))));*7",
-"          @**])32222222<))))))))))))))))))))))))))))))));*7",
-"          **^9)5222222<)))))))))))))))))))))))))))))))));*7",
-"         #**g)|222222<))))))))))))))))))))))))))))))))));*7",
-"        #**;)a622222<)))))))))))))))))))))))))))))))))));*7",
-"        #**')d22222[))))))))))))))))))))))))))))))))))));*7",
-"       #**8)a62222ca))))))))))))))))))))))))))))))))))));*7",
-"       $*^()f2222ca)))))))))))))))))))))))))))))))))))));*7",
-"      #**/)_22225a))))))))))))))))))))))))))))))))))))));*7",
-"      **^9)<2226b)))))))))))))))))))))))))))))))))))))));*7",
-"     #**/)_2226b))))))))))))))))))))))))))))))))))))))));*{",
-"     **~))<2220)))))))))))))))))))))))))))))))))))))))));*7",
-"    #**g)a222|))))))))))))))))))))))))))))))))))))))))));*7",
-"    **~))d22f)))))))))))))))))))))))))))))))))))))))))))4*e",
-"   #**g)a62[))))))))))))))))))))))))))))))))))))))))))))**%",
-"   **~)):2ca))))))))))))))))))))))))))))))))))))))))))))**%",
-"  #**g))56b)))))))))))))))))))))))))))))))))))))))))))))**%",
-"  $*^))|20))))))))))))))))))))))))))))))))))))))))))))))**%",
-" $**/))1f))))))))))))))))))))))))))))))))))))))))))))))9**=",
-" $*^9)bc)))))))))))))))))))))))))))))))))))))))))))))))'**#",
-"$**/))<b)))))))))))))))))))))))))))))))))))))))))))))))'**$",
-"$**()a:))))))))))))))))))))))))))))))))))))))))))))))))'**#",
-"**8))|_))))))))))))))))))))))))))))))))))))))))))))))))}**#",
-"**!)):)))))))))))))))))))))))))))))))))))))))))))))))))/**-",
-"*4))0_)))))))))))))))))))))))))))))))))))))))))))))))))/**-",
-"*;))3)))))))))))))))))))))))))))))))))))))))))))))))))),*h-",
-"*4)))))))))))))))))))))))))))))))))))))))))))))))))))));*7-",
-"**)))))))))))))))))))))))))))))))))))))))))))))))))))))4*7-",
-"**>))))))))))))))))))))))))))))))))))))))))))))))))))))**{-",
-"**8))))))))))))))))))))))))))))))))))))))))))))))))))))**e-",
-"h*^9))))))))))))))))))))))))))))))))))))))))))))))))))'**%-",
-"7**/))))))))))))))))))))))))))))))))))))))))))))))))))'**$-",
-"#h**!)))))))))))))))))))))))))))))))))))))))))))))))))/**#-",
-"-7**49))))))))))))))))))))))))))))))))))))))))))))))))]**.-",
-"-+i**8))))))))))))))))))))))))))))))))))))))))))))))));*h--",
-"--$h**8)))))))))))))))))))))))))))))))))))))))))))))))~*7--",
-"---=h**89)))))))))))))))))))))))))))))))))))))))))))))**{.-",
-".---eh**4()))))))))))))))))))))))))))))))))))))))))))'**%--",
-"-----&h**^}))))))))))))))))))))))))))))))))))))))))))g**$--",
-"-.--.-#i***;!))))))))))))))))))))))))))))))))))))))))/**#--",
-"------..{****8())))))))))))))))))))))))))))))))))))));*h--.",
-"-.-------$i****8!))))))))))))))))))))))))))))))))))))^*7---",
-"---.------.%i****4g9))))))))))))))))))))))))))))))))(**{---",
-"------------.%i****^8>))))))))))))))))))))))))))))))>**&.--",
-".---.--.------.&i*****^,g())))))))))))))))))))))))))]**+---",
-"-.------.--.-----@{h******~8g())))))))))))))))))))))4*i----",
-"-----.-------.------${i*******~,/'())))))))))))))))9**{--.-",
-"--.-----.-----.--------@%7h********^;8/'!))))))))))g**$----",
-"-----------.----.----------#%{h***********^;,//>'');**-.---",
-"----.---.----------.-.-.--.----.$%77h****************h{e%ee",
-"-.------------.-------------.------.-##%e77h*********hhhhhh"};
diff --git a/perl-install/pixmaps/mouse_middle.xpm b/perl-install/pixmaps/mouse_middle.xpm
deleted file mode 100644
index 1724c9190..000000000
--- a/perl-install/pixmaps/mouse_middle.xpm
+++ /dev/null
@@ -1,89 +0,0 @@
-/* XPM */
-static char * mouse_middle_xpm[] = {
-"13 62 24 1",
-" 	c None",
-".	c #999ABD",
-"+	c #9E9EC1",
-"@	c #FF3310",
-"#	c #77819E",
-"$	c #FF330C",
-"%	c #FF330B",
-"&	c #FF3300",
-"*	c #FF3308",
-"=	c #FF3307",
-"-	c #142753",
-";	c #384365",
-">	c #6F7892",
-",	c #0F1C3D",
-"'	c #FF3304",
-")	c #FF3303",
-"!	c #606C8C",
-"~	c #525E81",
-"{	c #6D6E91",
-"]	c #898BA4",
-"^	c #A3A4C3",
-"/	c #AEB2CF",
-"(	c #A9ADCA",
-"_	c #BABEDA",
-".+@@@@@@@@@..",
-"##$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"#-$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"#-$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&$$$$$$$$%&&",
-"#;$$$$$$$$%;#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"##********=.>",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&$$$$$$$$%&&",
-"-#********=,#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"##$$$$$$$$%&&",
-"&&'''''''').#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"!!@@@@@@@@@~#",
-"&&'''''''')&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"{!@@@@@@@@@~]",
-"&&'''''''')&&",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"!!@@@@@@@@@{.",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!{@@@@@@@@@!^",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-".]@@@@@@@@@./",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!!@@@@@@@@@!(",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!!$$$$$$$$%!^",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"!!@@@@@@@@@!+",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"/_@@@@@@@@@/_",
-"__@@@@@@@@@__"};
diff --git a/perl-install/pixmaps/mouse_right.xpm b/perl-install/pixmaps/mouse_right.xpm
deleted file mode 100644
index 97c6824cb..000000000
--- a/perl-install/pixmaps/mouse_right.xpm
+++ /dev/null
@@ -1,143 +0,0 @@
-/* XPM */
-static char * mouse_right_xpm[] = {
-"61 91 49 1",
-" 	c None",
-".	c #7B84A1",
-"+	c #697392",
-"@	c #757C94",
-"#	c #848CAA",
-"$	c #5C6888",
-"%	c #BABEDA",
-"&	c #9FA1C0",
-"*	c #4A5778",
-"=	c #122450",
-"-	c #AFB0CD",
-";	c #9A9ABE",
-">	c #A7A9C8",
-",	c #253359",
-"'	c #4D283C",
-")	c #C42F14",
-"!	c #B52E19",
-"~	c #FF3300",
-"{	c #E1310A",
-"]	c #6B2A32",
-"^	c #21254B",
-"/	c #5C2937",
-"(	c #3E2741",
-"_	c #972C23",
-":	c #3E4862",
-"<	c #F03205",
-"[	c #A62D1E",
-"}	c #7A2B2D",
-"|	c #892C28",
-"1	c #D3300F",
-"2	c #11244D",
-"3	c #0E1A3A",
-"4	c #FF5300",
-"5	c #FF4000",
-"6	c #FF6600",
-"7	c #FF3900",
-"8	c #302646",
-"9	c #FF7300",
-"0	c #FF8000",
-"a	c #FF9300",
-"b	c #FF4600",
-"c	c #FF8600",
-"d	c #FF7900",
-"e	c #FF9900",
-"f	c #FF6000",
-"g	c #FF4D00",
-"h	c #FF8C00",
-"i	c #FF6C00",
-"j	c #FF5900",
-"...                                                          ",
-"+++@@@                                                       ",
-"#@$$$++++                                                    ",
-"%%%&.*===++                                                  ",
-"-%%%.======$$                                                ",
-";>%%,=')'====$$                                              ",
-";;-;==!~~{]====*$                                            ",
-";;;*=^~~~~~{/====**                                          ",
-";;;==]~~~~~~~)(===***                                        ",
-";;#==_~~~~~~~~~_^===*:                                       ",
-";;@==)~~~~~~~~~~</===:*                                      ",
-";;+==~~~~~~~~~~~~~[^==:::                                    ",
-";>:=(~~~~~~~~~~~~~~{(===::                                   ",
-";%==/~~~~~~~~~~~~~~~~}===,:                                  ",
-";%==|~~~~~~~~~~~~~~~~~[^==:,                                 ",
-">;==_~~~~~~~~~~~~~~~~~~1^==:,,                               ",
-"-;==)~~~~~~~~~~~~~~~~~~~{(==:,,                              ",
-"%+==1~~~~~~~~~~~~~~~~~~~~<(==,,,                             ",
-"%$==~~~~~~~~~~~~~~~~~~~~~~<]==:,,                            ",
-"%*==~~~~~~~~~~~~~~~~~~~~~~~~]==,,2                           ",
-"%:='~~~~~~~~~~~~~~~~~~~~~~~~~]==,,2                          ",
-"%:='~~~~~~~~~~~~~~~~~~~~~~~~~~]==,22                         ",
-"%==/~~~~~~~~~~~~~~~~~~~~~~~~~~~'==,22                        ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~<(==,22                       ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~<(==,2                       ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1^==22                      ",
-"&==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1===22                     ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~[===22                    ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~}==222                   ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'==22                   ",
-";==<~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<^==32                  ",
-"#==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~)===22                 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|==222                ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'==22                ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{^==22               ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~45~~~~[==232              ",
-"$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~67~~~~/==22              ",
-"+=8~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~79~~~~<^==32             ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~46~~~~[==222            ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~04~~~~'==23            ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5ab~~~{^==22           ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6c7~~~|==232          ",
-"*='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7ad~~~~8==23          ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6ef~~~)==222         ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7eeg~~~/==23         ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~9ea7~~{===22        ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~bee0~~~|==23        ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ceef~~<^==22       ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~feeeb~~_==232      ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5eeec7~~8==23      ",
-"$='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~heeei~~[==223     ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ieeeeg~~8==32     ",
-"$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeh7~!==232    ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~beeeeei~~'==23    ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~eeeeeeg~)==223   ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~aeeeeeh~~(==32   ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeee6~[==233  ",
-";==1~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeea5~8==22  ",
-"#==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeee9~[==23  ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeee5~8=223 ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~aeeeeeeee9~_==22 ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~eeeeeeeeee5<^=233",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~geeeeeeeeee9~}==23",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~feeeeeeeeeea7{==22",
-"%:=/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeeeeeej~/=22",
-"-:='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5eeeeeeeeeeee9~]=23",
-"%:=(~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeee0~'=22",
-"%+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7aeeeeeeeeeeeee~^=22",
-"%+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeec1==22",
-"%#==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5aeeeeeeeeeeeee6}==22",
-"%;==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeeeeeeeeh7^=22,",
-"%>==_~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeeeb_==22@",
-"%%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeeej{^==2,%",
-"%%,=/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeeej~'==22#%",
-"%%:='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeea4~]==22$%%",
-"%%$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeec5~]==22,-%-",
-"%%@=={~~~~~~~~~~~~~~~~~~~~~~~~~~~7deeeeeeeeeeeea6~~]==22:-%-;",
-"%%;==)~~~~~~~~~~~~~~~~~~~~~~~~~~gheeeeeeeeeeee95~<'==22:-%-;;",
-"%->==|~~~~~~~~~~~~~~~~~~~~~~~~79eeeeeeeeeeee95~~!^==22*-%&;;;",
-"%%%==]~~~~~~~~~~~~~~~~~~~~~~76aeeeeeeeeeea65~~{'===22+%-&;;;;",
-"%%%:=(~~~~~~~~~~~~~~~~~~~~76aeeeeeeeeeed4~~~{]====2,;--;;;;;;",
-"%-%$==~~~~~~~~~~~~~~~~~~56aeeeeeeeeedj7~~~{]====2,+%-&;;;;;;;",
-"%%%@==)~~~~~~~~~~~~~~~4deeeeeeeeci4~~~~~['====22*>%-&;;;;;;#;",
-"%%%&==_~~~~~~~~~~~~49aeeeeee0i47~~~~~!]^====22*>%-;;;;;;;;;;;",
-"%%%%==]~~~~~~~~7j9aeeee0ifg~~~~~~<[]^=====2,+%%-&;;;;;;;;;;;;",
-"%-%%:=8~~~~74ice006fg7~~~~~~~{!}(======22$#%%-&;;;;;;;#;;;;;;",
-"%%%%+==1~~bggb~~~~~~~~~~<)|/8=======2,*.-%%>&;;;;;;;;;;;;;;;#",
-"%-%%&==_~~~~~~~~~~1)|}'^========22:$;%%%%-;;;;;;;;#;;;;;;;;;;",
-"%%%%%,=(~1)!||/'8===========22:+#-%%%%-&;;;;;;;;;;;;;;;;;;;;;",
-";#+$+:================23,:+.&%%%%%%-&;;;;;;;;;;;;;;;;;;#;;;;;",
-"222222=========22,:*$.;-%%%%%%%%>&&;;;;;;;;;;;;;;;;#;;;;;;;;;"};
diff --git a/perl-install/pixmaps/network.png b/perl-install/pixmaps/network.png
deleted file mode 100644
index aee48fb09..000000000
--- a/perl-install/pixmaps/network.png
+++ /dev/null
diff --git a/perl-install/pixmaps/partition.png b/perl-install/pixmaps/partition.png
deleted file mode 100644
index 982fb7681..000000000
--- a/perl-install/pixmaps/partition.png
+++ /dev/null
diff --git a/perl-install/pixmaps/quit.png b/perl-install/pixmaps/quit.png
deleted file mode 100644
index 3aa7db5e0..000000000
--- a/perl-install/pixmaps/quit.png
+++ /dev/null
diff --git a/perl-install/pixmaps/rootpasswd.png b/perl-install/pixmaps/rootpasswd.png
deleted file mode 100644
index af153abb6..000000000
--- a/perl-install/pixmaps/rootpasswd.png
+++ /dev/null
diff --git a/perl-install/pixmaps/security.png b/perl-install/pixmaps/security.png
deleted file mode 100644
index af153abb6..000000000
--- a/perl-install/pixmaps/security.png
+++ /dev/null
diff --git a/perl-install/pixmaps/services.png b/perl-install/pixmaps/services.png
deleted file mode 100644
index 7cd8b06d6..000000000
--- a/perl-install/pixmaps/services.png
+++ /dev/null
diff --git a/perl-install/pixmaps/summary.png b/perl-install/pixmaps/summary.png
deleted file mode 100644
index 79a1e0f4f..000000000
--- a/perl-install/pixmaps/summary.png
+++ /dev/null
diff --git a/perl-install/pixmaps/user.png b/perl-install/pixmaps/user.png
deleted file mode 100644
index a9f7d0eb6..000000000
--- a/perl-install/pixmaps/user.png
+++ /dev/null
diff --git a/perl-install/pixmaps/warning.png b/perl-install/pixmaps/warning.png
deleted file mode 100644
index d6f2306db..000000000
--- a/perl-install/pixmaps/warning.png
+++ /dev/null
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
deleted file mode 100644
index e5905940a..000000000
--- a/perl-install/pkgs.pm
+++ /dev/null
@@ -1,1742 +0,0 @@
-package pkgs; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(*LOG %preferred $limitMinTrans %compssListDesc);
-
-use MDK::Common::System;
-use common;
-use install_any;
-use run_program;
-use detect_devices;
-use log;
-use fs;
-use loopback;
-use c;
-
-
-
-my @preferred = qw(perl-GTK postfix gcc gcc-cpp gcc-c++ proftpd ghostscript-X vim-minimal kernel db1 db2 ispell-en Bastille-Curses-module nautilus libxpm4);
-@preferred{@preferred} = ();
-
-#- lower bound on the left ( aka 90 means [90-100[ )
-%compssListDesc = (
-   5 => __("must have"),
-   4 => __("important"),
-   3 => __("very nice"),
-   2 => __("nice"),
-   1 => __("maybe"),
-);
-
-#- constant for small transaction.
-$limitMinTrans = 8;
-
-#- constant for package accessor (via table).
-my $FILE                 = 0;
-my $FLAGS                = 1;
-my $SIZE_DEPS            = 2;
-my $MEDIUM               = 3;
-my $PROVIDES             = 4;
-my $VALUES               = 5;
-my $HEADER               = 6;
-my $INSTALLED_CUMUL_SIZE = 7;
-my $EPOCH                = 8;
-
-#- constant for packing flags, see below.
-my $PKGS_SELECTED  = 0x00ffffff;
-my $PKGS_FORCE     = 0x01000000;
-my $PKGS_INSTALLED = 0x02000000;
-my $PKGS_BASE      = 0x04000000;
-my $PKGS_UPGRADE   = 0x20000000;
-
-#- package to ignore, typically in Application CD.
-my %ignoreBadPkg = (
-		    'civctp-demo'   => 1,
-		    'eus-demo'      => 1,
-		    'myth2-demo'    => 1,
-		    'heretic2-demo' => 1,
-		    'heroes3-demo'  => 1,
-		    'rt2-demo'      => 1,
-		   );
-
-#- basic methods for extracting informations about packages.
-#- to save memory, (name, version, release) are no more stored, they
-#- are directly generated from (file).
-#- all flags are grouped together into (flags), these includes the
-#- following flags : selected, force, installed, base, skip.
-#- size and deps are grouped to save memory too and make a much
-#- simpler and faster depslist reader, this gets (sizeDeps).
-sub packageHeaderFile   { $_[0] ? $_[0]->[$FILE]
-			    : die "invalid package from\n" . backtrace() }
-sub packageName         { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*)-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageVersion      { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-([^:\-\s]+)-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageRelease      { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-([^:\-\s]+)\.[^:\.\-\s]*(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageArch         { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-[^:\-\s]+\.([^:\.\-\s]*)(?::.*)?/ ? $1
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageFile         { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*)(?::(.*))?/ ? ($2 || $1) . ".rpm"
-			    : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-sub packageEpoch        { $_[0] && $_[0]->[$EPOCH] || 0 }
-
-sub packageSize   { to_int($_[0] && ($_[0]->[$SIZE_DEPS] - ($_[0]->[$INSTALLED_CUMUL_SIZE] || 0))) }
-sub packageDepsId { split ' ', ($_[0] && ($_[0]->[$SIZE_DEPS] =~ /^\d*\s*(.*)/)[0]) }
-
-sub packageFlagSelected  { $_[0] && $_[0]->[$FLAGS] & $PKGS_SELECTED }
-sub packageFlagForce     { $_[0] && $_[0]->[$FLAGS] & $PKGS_FORCE }
-sub packageFlagInstalled { $_[0] && $_[0]->[$FLAGS] & $PKGS_INSTALLED }
-sub packageFlagBase      { $_[0] && $_[0]->[$FLAGS] & $PKGS_BASE }
-sub packageFlagUpgrade   { $_[0] && $_[0]->[$FLAGS] & $PKGS_UPGRADE }
-
-sub packageSetFlagSelected  { $_[0]->[$FLAGS] &= ~$PKGS_SELECTED; $_[0]->[$FLAGS] |= $_[1] & $PKGS_SELECTED; }
-
-sub packageSetFlagForce     { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_FORCE)     : ($_[0]->[$FLAGS] &= ~$PKGS_FORCE); }
-sub packageSetFlagInstalled { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_INSTALLED) : ($_[0]->[$FLAGS] &= ~$PKGS_INSTALLED); }
-sub packageSetFlagBase      { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_BASE)      : ($_[0]->[$FLAGS] &= ~$PKGS_BASE); }
-sub packageSetFlagUpgrade   { $_[0] or die "invalid package from\n" . backtrace();
-			      $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_UPGRADE)   : ($_[0]->[$FLAGS] &= ~$PKGS_UPGRADE); }
-
-sub packageMedium { my ($packages, $p) = @_; $p or die "invalid package from\n" . backtrace();
-		    $packages->{mediums}{$p->[$MEDIUM]} }
-
-sub packageProvides { $_[1] or die "invalid package from\n" . backtrace();
-		      map { $_[0]->{depslist}[$_] || die "unkown package id $_" } unpack "s*", $_[1]->[$PROVIDES] }
-
-sub packageRate          { substr($_[0] && $_[0]->[$VALUES], 0, 1) }
-sub packageRateRFlags    { my ($rate, @flags) = split "\t", $_[0] && $_[0]->[$VALUES]; ($rate, @flags) }
-sub packageSetRateRFlags { my ($pkg, $rate, @flags) = @_; $pkg or die "invalid package from\n" . backtrace();
-			   $pkg->[$VALUES] = join("\t", $rate, @flags) }
-
-sub packageHeader     { $_[0] && $_[0]->[$HEADER] }
-sub packageFreeHeader { $_[0] && c::headerFree(delete $_[0]->[$HEADER]) }
-
-sub packageSelectedOrInstalled { packageFlagSelected($_[0]) || packageFlagInstalled($_[0]) }
-
-sub packageId {
-    my ($packages, $pkg) = @_;
-    my $i = 0;
-    foreach (@{$packages->{depslist}}) { return $i if $pkg == $packages->{depslist}[$i]; $i++ }
-    return;
-}
-
-sub cleanHeaders {
-    my ($prefix) = @_;
-    rm_rf("$prefix/tmp/headers") if -e "$prefix/tmp/headers";
-}
-
-#- get all headers from an hdlist file.
-sub extractHeaders {
-    my ($prefix, $pkgs, $media) = @_;
-    my %medium2pkgs;
-
-    cleanHeaders($prefix);
-
-    foreach (@$pkgs) {
-	push @{$medium2pkgs{$_->[$MEDIUM]} ||= []}, $_;
-    }
-
-    foreach (values %medium2pkgs) {
-	my $medium = $media->{$_->[0][$MEDIUM]}; #- the first one is a valid package pointing to right medium to use.
-
-	eval {
-	    require packdrake;
-	    my $packer = new packdrake("/tmp/$medium->{hdlist}", quiet => 1);
-	    $packer->extract_archive("$prefix/tmp/headers", map { packageHeaderFile($_) } @$_);
-	};
-    }
-
-    foreach (@$pkgs) {
-	my $f = "$prefix/tmp/headers/". packageHeaderFile($_);
-	local *H;
-	open H, $f or log::l("unable to open header file $f: $!"), next;
-	$_->[$HEADER] = c::headerRead(fileno H, 1) or log::l("unable to read header of package ". packageHeaderFile($_));
-    }
-    @$pkgs = grep { $_->[$HEADER] } @$pkgs;
-}
-
-#- size and correction size functions for packages.
-my $B = 1.20873;
-my $C = 4.98663; #- doesn't take hdlist's into account as getAvailableSpace will do it.
-sub correctSize { $B * $_[0] + $C }
-sub invCorrectSize { ($_[0] - $C) / $B }
-
-sub selectedSize {
-    my ($packages) = @_;
-    my $size = 0;
-    foreach (values %{$packages->{names}}) {
-	packageFlagSelected($_) && !packageFlagInstalled($_) and $size += packageSize($_);
-    }
-    $size;
-}
-sub correctedSelectedSize { correctSize(selectedSize($_[0]) / sqr(1024)) }
-
-sub size2time {
-    my ($x, $max) = @_;
-    my $A = 7e-07;
-    my $limit = min($max * 3 / 4, 9e8);
-    if ($x < $limit) {
-	$A * $x;
-    } else { 
-	$x -= $limit;
-	my $B = 6e-16;
-	my $C = 15e-07;
-	$B * $x ** 2 + $C * $x + $A * $limit;
-    }
-}
-
-
-#- searching and grouping methods.
-#- package is a reference to list that contains
-#- a hash to search by name and
-#- a list to search by id.
-sub packageByName {
-    my ($packages, $name) = @_;
-    $packages->{names}{$name} or log::l("unknown package `$name'") && undef;
-}
-sub packageById {
-    my ($packages, $id) = @_;
-    my $l = $packages->{depslist}[$id]; #- do not log as id unsupported are still in depslist.
-    $l && @$l && $l;
-}
-sub packagesOfMedium {
-    my ($packages, $medium) = @_;
-    grep { $_ && $_->[$MEDIUM] == $medium } @{$packages->{depslist}};
-}
-sub packagesToInstall {
-    my ($packages) = @_;
-    grep { packageFlagSelected($_) && !packageFlagInstalled($_) &&
-	     packageMedium($packages, $_)->{selected} } values %{$packages->{names}};
-}
-
-sub allMediums {
-    my ($packages) = @_;
-    sort { $a <=> $b } keys %{$packages->{mediums}};
-}
-sub mediumDescr {
-    my ($packages, $medium) = @_;
-    $packages->{mediums}{$medium}{descr};
-}
-
-#- selection, unselection of package.
-sub selectPackage { #($$;$$$)
-    my ($packages, $pkg, $base, $otherOnly, $check_recursion) = @_;
-
-    #- check for medium selection, if the medium has not been
-    #- selected, the package cannot be selected.
-    #- check if the same or better version is installed,
-    #- do not select in such case.
-    $pkg && packageMedium($packages, $pkg)->{selected} && !packageFlagInstalled($pkg) or return;
-
-    #- avoid infinite recursion (mainly against badly generated depslist.ordered).
-    $check_recursion ||= {}; exists $check_recursion->{$pkg->[$FILE]} and return; $check_recursion->{$pkg->[$FILE]} = undef;
-
-    #- make sure base package are set even if already selected.
-    $base and packageSetFlagBase($pkg, 1);
-
-    #- select package and dependancies, otherOnly may be a reference
-    #- to a hash to indicate package that will strictly be selected
-    #- when value is true, may be selected when value is false (this
-    #- is only used for unselection, not selection)
-    unless (packageFlagSelected($pkg)) {
-	foreach (packageDepsId($pkg)) {
-	    if (/\|/) {
-		#- choice deps should be reselected recursively as no
-		#- closure on them is computed, this code is exactly the
-		#- same as pixel's one.
-		my $preferred;	    
-		foreach (split '\|') {
-		    my $dep = packageById($packages, $_) or next;
-		    $preferred ||= $dep;
-		    packageFlagSelected($dep) and $preferred = $dep, last;
-		    packageName($dep) =~ /kernel-\d/ and $preferred = $dep; #- hard coded preference to simple kernel
-		    exists $preferred{packageName($dep)} and $preferred = $dep;
-		}
-		$preferred or die "unable to find a package for choice";
-		packageFlagSelected($preferred) or log::l("selecting default package as $preferred->[$FILE]");
-		selectPackage($packages, $preferred, $base, $otherOnly, $check_recursion);
-	    } else {
-		#- deps have been closed except for choices, so no need to
-		#- recursively apply selection, expand base on it.
-		my $dep = packageById($packages, $_);
-		$base and packageSetFlagBase($dep, 1);
-		$otherOnly and !packageFlagSelected($dep) and $otherOnly->{packageName($dep)} = 1;
-		$otherOnly or packageSetFlagSelected($dep, 1+packageFlagSelected($dep));
-	    }
-	}
-    }
-    $otherOnly and !packageFlagSelected($pkg) and $otherOnly->{packageName($pkg)} = 1;
-    $otherOnly or packageSetFlagSelected($pkg, 1+packageFlagSelected($pkg));
-    1;
-}
-sub unselectPackage($$;$) {
-    my ($packages, $pkg, $otherOnly) = @_;
-
-    #- base package are not unselectable,
-    #- and already unselected package are no more unselectable.
-    packageFlagBase($pkg) and return;
-    packageFlagSelected($pkg) or return;
-
-    #- dependancies may be used to propose package that may be not
-    #- usefull for the user, since their counter is just one and
-    #- they are not used any more by other packages.
-    #- provides are closed and are taken into account to get possible
-    #- unselection of package (value false on otherOnly) or strict
-    #- unselection (value true on otherOnly).
-    foreach my $provided ($pkg, packageProvides($packages, $pkg)) {
-	packageFlagBase($provided) and die "a provided package cannot be a base package";
-	if (packageFlagSelected($provided)) {
-	    my $unselect_alone = 1;
-	    foreach (packageDepsId($provided)) {
-		$unselect_alone = 0;
-		if (/\|/) {
-		    #- this package use a choice of other package, so we have to check
-		    #- if our package is not included in the choice, if this is the
-		    #- case, if must be checked one of the other package are selected.
-		    foreach (split '\|') {
-			my $dep = packageById($packages, $_) or next;
-			$dep == $pkg and $unselect_alone |= 1 and next;
-			packageFlagBase($dep) || packageFlagSelected($dep) and $unselect_alone |= 2;
-		    }
-		} else {
-		    packageById($packages, $_) == $pkg and $unselect_alone = 1;
-		}
-		$unselect_alone == 1 and last;
-	    }
-	    #- if package has been found and nothing more selected,
-	    #- deselect the provided, or we can ignore it safely.
-	    $provided == $pkg || $unselect_alone == 1 or next;
-	    $otherOnly or packageSetFlagSelected($provided, 0);
-	    $otherOnly and $otherOnly->{packageName($provided)} = 1;
-	}
-	foreach (map { split '\|' } packageDepsId($provided)) {
-	    my $dep = packageById($packages, $_) or next;
-	    packageFlagBase($dep) and next;
-	    packageFlagSelected($dep) or next;
-	    for (packageFlagSelected($dep)) {
-		$_ == 1 and do { $otherOnly and $otherOnly->{packageName($dep)} ||= 0; };
-		$_ >  1 and do { $otherOnly or packageSetFlagSelected($dep, $_-1); };
-		last;
-	    }
-	}
-    }
-    1;
-}
-sub togglePackageSelection($$;$) {
-    my ($packages, $pkg, $otherOnly) = @_;
-    packageFlagSelected($pkg) ? unselectPackage($packages, $pkg, $otherOnly) : selectPackage($packages, $pkg, 0, $otherOnly);
-}
-sub setPackageSelection($$$) {
-    my ($packages, $pkg, $value) = @_;
-    $value ? selectPackage($packages, $pkg) : unselectPackage($packages, $pkg);
-}
-
-sub unselectAllPackages($) {
-    my ($packages) = @_;
-    foreach (values %{$packages->{names}}) {
-	unless (packageFlagBase($_) || packageFlagUpgrade($_)) {
-	    packageSetFlagSelected($_, 0);
-	}
-    }
-}
-sub unselectAllPackagesIncludingUpgradable($) {
-    my ($packages, $removeUpgradeFlag) = @_;
-    foreach (values %{$packages->{names}}) {
-	unless (packageFlagBase($_)) {
-	    packageSetFlagSelected($_, 0);
-	    packageSetFlagUpgrade($_, 0);
-	}
-    }
-}
-
-sub psUpdateHdlistsDeps {
-    my ($prefix, $method, $packages) = @_;
-    my ($good_hdlists_deps, $mediums) = (0, 0);
-
-    #- check if current configuration is still up-to-date and do not need to be updated.
-    foreach (values %{$packages->{mediums}}) {
-	my $hdlistf = "$prefix/var/lib/urpmi/hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
-	my $synthesisf = "$prefix/var/lib/urpmi/synthesis.hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
-	-s $hdlistf == $_->{hdlist_size} && -s $synthesisf == $_->{synthesis_hdlist_size} and ++$good_hdlists_deps;
-	++$mediums;
-    }
-    $good_hdlists_deps > 0 && $good_hdlists_deps == $mediums and return; #- nothing to do.
-
-    #- at this point, this means partition has problably be reformatted and hdlists should be retrieved.
-    install_any::useMedium($install_any::boot_medium);
-
-    my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
-
-    #- WARNING: this function should be kept in sync with functions
-    #- psUsingHdlists and psUsingHdlist.
-    #- it purpose it to update hdlist files on system to install.
-
-    #- parse hdlist.list file.
-    my $medium = 1;
-    foreach (<$listf>) {
-	chomp;
-	s/\s*#.*$//;
-	/^\s*$/ and next;
-	m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
-	my ($hdlist, $rpmsdir, $descr) = ($1, $2, $3);
-
-	#- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
-	#- for getting header of package during installation or after by urpmi.
-	my $fakemedium = "$descr ($method$medium)";
-	my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-	-e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
-	install_any::getAndSaveFile("Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
-	symlinkf $newf, "/tmp/$hdlist";
-	install_any::getAndSaveFile("Mandrake/base/synthesis.$hdlist",
-				    "$prefix/var/lib/urpmi/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2"));
-	++$medium;
-    }
-
-    #- this is necessary for urpmi.
-    install_any::getAndSaveFile("Mandrake/base/$_", "$prefix/var/lib/urpmi/$_")
-      foreach qw(depslist.ordered provides rpmsrate);
-}
-
-sub psUsingHdlists {
-    my ($prefix, $method) = @_;
-    my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
-    my %packages = ( names => {}, count => 0, depslist => [], mediums => {});
-
-    #- parse hdlists file.
-    my $medium = 1;
-    foreach (<$listf>) {
-	chomp;
-	s/\s*#.*$//;
-	/^\s*$/ and next;
-	m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
-
-	#- make sure the first medium is always selected!
-	#- by default select all image.
-	psUsingHdlist($prefix, $method, \%packages, $1, $medium, $2, $3, 1);
-
-	++$medium;
-    }
-
-    log::l("psUsingHdlists read " . scalar keys(%{$packages{names}}) .
-	   " headers on " . scalar keys(%{$packages{mediums}}) . " hdlists");
-
-    \%packages;
-}
-
-sub psUsingHdlist {
-    my ($prefix, $method, $packages, $hdlist, $medium, $rpmsdir, $descr, $selected, $fhdlist) = @_;
-    my $fakemedium = "$descr ($method$medium)";
-    my ($relocated, $ignored) = (0, 0);
-    log::l("trying to read $hdlist for medium $medium");
-
-    #- if the medium already exist, use it.
-    $packages->{mediums}{$medium} and return $packages->{mediums}{$medium};
-
-    my $m = $packages->{mediums}{$medium} = { hdlist     => $hdlist,
-					      method     => $method,
-					      medium     => $medium,
-					      rpmsdir    => $rpmsdir, #- where is RPMS directory.
-					      descr      => $descr,
-					      fakemedium => $fakemedium,
-					      min        => $packages->{count},
-					      max        => -1, #- will be updated after reading current hdlist.
-					      selected   => $selected, #- default value is only CD1, it is really the minimal.
-					    };
-
-    #- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
-    #- for getting header of package during installation or after by urpmi.
-    my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-    -e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
-    install_any::getAndSaveFile($fhdlist || "Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
-    $m->{hdlist_size} = -s $newf; #- keep track of size for post-check.
-    symlinkf $newf, "/tmp/$hdlist";
-
-    #- if $fhdlist is defined, this is preferable not to try to find the associated synthesis.
-    unless ($fhdlist) {
-	#- copy existing synthesis file too.
-	my $newsf = "$prefix/var/lib/urpmi/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-	install_any::getAndSaveFile("Mandrake/base/synthesis.$hdlist", $newsf);
-	$m->{synthesis_hdlist_size} = -s $newsf; #- keep track of size for post-check.
-	-s $newsf > 0 or unlink $newsf;
-    }
-
-    #- avoid using more than one medium if Cd is not ejectable.
-    #- but keep all medium here so that urpmi has the whole set.
-    $method eq 'cdrom' && $medium > 1 && !common::usingRamdisk() and return;
-
-    #- extract filename from archive, this take advantage of verifying
-    #- the archive too.
-    eval {
-	require packdrake;
-	my $packer = new packdrake($newf, quiet => 1);
-	foreach (@{$packer->{files}}) {
-	    $packer->{data}{$_}[0] eq 'f' or next;
-	    my $pkg = [ (undef) x 8 ]; $pkg->[$FILE] = $_; $pkg->[$MEDIUM] = $medium;
-	    my $specific_arch = packageArch($pkg);
-	    if (!$specific_arch || MDK::Common::System::compat_arch($specific_arch)) {
-		my $old_pkg = $packages->{names}{packageName($pkg)};
-		if ($old_pkg) {
-		    my $epo_compare = 0; #- NO EPOCH AVAILABLE TODO packageEpoch($pkg) <=> packageEpoch($old_pkg);
-		    my $ver_compare = $epo_compare == 0 && versionCompare(packageVersion($pkg), packageVersion($old_pkg));
-		    my $rel_compare = $ver_compare == 0 && versionCompare(packageRelease($pkg), packageRelease($old_pkg));
-		    if ($epo_compare > 0  || $ver_compare > 0 || $rel_compare > 0 ||
-			$epo_compare == 0 && $ver_compare == 0 && $rel_compare == 0 &&
-			MDK::Common::System::better_arch($specific_arch, packageArch($old_pkg))) {
-			log::l("replacing old package $old_pkg->[$FILE] with package $pkg->[$FILE]");
-			foreach ($FILE, $MEDIUM) { #- TODO KEEP OLD PARAMETER
-			    $old_pkg->[$_] = $pkg->[$_];
-			}
-			packageFreeHeader($old_pkg);
-			if (packageFlagInstalled($old_pkg)) {
-			    packageSetFlagInstalled($old_pkg, 0);
-			    selectPackage($packages, $old_pkg);
-			}
-			++$relocated;
-		    } else {
-			log::l("no need to replace previous package $old_pkg->[$FILE] with newer package $pkg->[$FILE]");
-			++$ignored;
-		    }
-		} else {
-		    $packages->{names}{packageName($pkg)} = $pkg;
-		    ++$packages->{count}; #- take care of this one, so that desplist will be clean with index of package.
-		}
-	    } else {
-	        log::l("ignoring package $_ with incompatible arch: $specific_arch");
-		++$ignored;
-	    }
-	}
-    };
-
-    #- update maximal index.
-    $m->{max} = $packages->{count} - 1;
-    $m->{max} >= $m->{min} || $relocated > 0 || $ignored > 0 or die "nothing found while parsing $newf";
-    $relocated > 0 and log::l("relocated $relocated headers in $hdlist");
-    $ignored > 0 and log::l("ignored $ignored headers in $hdlist");
-    log::l("read " . ($m->{max} - $m->{min} + 1) . " new headers in $hdlist");
-    $m;
-}
-
-sub getOtherDeps($$) {
-    my ($packages, $f) = @_;
-
-    #- this version of getDeps is customized for handling errors more easily and
-    #- convert reference by name to deps id including closure computation.
-    local $_;
-    while (<$f>) {
-	my ($name, $version, $release, $size, $deps) = /^(\S*)-([^-\s]+)-([^-\s]+)\s+(\d+)\s+(.*)/;
-	my $pkg = $packages->{names}{$name};
-
-	$pkg or log::l("ignoring package $name-$version-$release in depslist is not in hdlist"), next;
-	$version eq packageVersion($pkg) and $release eq packageRelease($pkg)
-	  or log::l("warning package $name-$version-$release in depslist mismatch version or release in hdlist ($version ne ",
-		    packageVersion($pkg), " or $release ne ", packageRelease($pkg), ")"), next;
-
-	my $index = scalar @{$packages->{depslist}};
-	$index >= packageMedium($packages, $pkg)->{min} && $index <= packageMedium($packages, $pkg)->{max}
-	  or log::l("ignoring package $name-$version-$release in depslist outside of hdlist indexation");
-
-	#- here we have to translate referenced deps by name to id.
-	#- this include a closure on deps too.
-	my %closuredeps;
-	@closuredeps{map { packageId($packages, $_), packageDepsId($_) }
-		       grep { $_ }
-			 map { packageByName($packages, $_) or do { log::l("unknown package $_ in depslist for closure"); undef } }
-			   split /\s+/, $deps} = ();
-
-	$pkg->[$SIZE_DEPS] = join " ", $size, keys %closuredeps;
-
-	push @{$packages->{depslist}}, $pkg;
-    }
-
-    #- check for same number of package in depslist and hdlists, avoid being to hard.
-    scalar(keys %{$packages->{names}}) == scalar(@{$packages->{depslist}})
-      or log::l("other depslist has not same package as hdlist file");
-}
-
-sub getDeps {
-    my ($prefix, $packages) = @_;
-
-    #- this is necessary for urpmi.
-    install_any::getAndSaveFile('Mandrake/base/depslist.ordered', "$prefix/var/lib/urpmi/depslist.ordered");
-    install_any::getAndSaveFile('Mandrake/base/provides', "$prefix/var/lib/urpmi/provides");
-
-    #- beware of heavily mismatching depslist.ordered file against hdlist files.
-    my $mismatch = 0;
-
-    #- count the number of packages in deplist that are also in hdlist
-    my $nb_deplist = 0;
-
-    #- update dependencies list, provides attributes are updated later
-    #- cross reference to be resolved on id (think of loop requires)
-    #- provides should be updated after base flag has been set to save
-    #- memory.
-    local *F; open F, "$prefix/var/lib/urpmi/depslist.ordered" or die "can't find dependancies list";
-    local $_;
-    while (<F>) {
-	my ($name, $version, $release, $arch, $epoch, $sizeDeps) =
-	  /^([^:\s]*)-([^:\-\s]+)-([^:\-\s]+)\.([^:\.\-\s]*)(?::(\d+)\S*)?\s+(.*)/;
-	my $pkg = $packages->{names}{$name};
-
-	#- these verification are necessary in case of error, but are no more fatal as
-	#- in case of only one medium taken into account during install, there should be
-	#- silent warning for package which are unknown at this point.
-	$pkg or
-	  log::l("ignoring $name-$version-$release.$arch in depslist is not in hdlist");
-	$pkg && $version ne packageVersion($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch version in hdlist"), $pkg = undef;
-	$pkg && $release ne packageRelease($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch release in hdlist"), $pkg = undef;
-	$pkg && $arch ne packageArch($pkg) and
-	  log::l("ignoring $name-$version-$release.$arch in depslist mismatch arch in hdlist"), $pkg = undef;
-
-	if ($pkg) {
-	    $nb_deplist++;
-	    $epoch && $epoch > 0 and $pkg->[$EPOCH] = $epoch; #- only 5% of the distribution use epoch (serial).
-	    $pkg->[$SIZE_DEPS] = $sizeDeps;
-
-	    #- check position of package in depslist according to precomputed
-	    #- limit by hdlist, very strict :-)
-	    #- above warning have chance to raise an exception here, but may help
-	    #- for debugging.
-	    my $i = scalar @{$packages->{depslist}};
-	    $i >= packageMedium($packages, $pkg)->{min} && $i <= packageMedium($packages, $pkg)->{max} or
-	      log::l("inconsistency in position for $name-$version-$release.$arch in depslist and hdlist"), $mismatch = 1;
-	}
-
-	#- package are already sorted in depslist to enable small transaction and multiple medium.
-	push @{$packages->{depslist}}, $pkg;
-    }
-
-    #- check for mismatching package, it should break with above die unless depslist has too many errors!
-    $mismatch and die "depslist.ordered mismatch against hdlist files";
-
-    #- check for same number of package in depslist and hdlists.
-    my $nb_hdlist = keys %{$packages->{names}};
-    $nb_hdlist == $nb_deplist or die "depslist.ordered has not same package as hdlist files ($nb_deplist != $nb_hdlist)";
-}
-
-sub getProvides($) {
-    my ($packages) = @_;
-
-    #- update provides according to dependencies, here are stored
-    #- reference to package directly and choice are included, this
-    #- assume only 1 of the choice is selected, else on unselection
-    #- the provided package will be deleted where other package still
-    #- need it.
-    #- base package are not updated because they cannot be unselected,
-    #- this save certainly a lot of memory since most of them may be
-    #- needed by a large number of package.
-    #- now using a packed of signed short, this means no more than 32768
-    #- packages can be managed by DrakX (currently about 2000).
-    my $i = 0;
-    foreach my $pkg (@{$packages->{depslist}}) {
-	$pkg or next;
-	unless (packageFlagBase($pkg)) {
-	    foreach (map { split '\|' } grep { !/^NOTFOUND_/ } packageDepsId($pkg)) {
-		my $provided = packageById($packages, $_) or next;
-		packageFlagBase($provided) or $provided->[$PROVIDES] = pack "s*", (unpack "s*", $provided->[$PROVIDES]), $i;
-	    }
-	}
-	++$i;
-    }
-}
-
-sub read_rpmsrate {
-    my ($packages, $f) = @_;
-    my $line_nb = 0;
-    my $fatal_error;
-    my (@l);
-    while (<$f>) {
-	$line_nb++;
-	/\t/ and die "tabulations not allowed at line $line_nb\n";
-	s/#.*//; # comments
-
-	my ($indent, $data) = /(\s*)(.*)/;
-	next if !$data; # skip empty lines
-
-	@l = grep { $_->[0] < length $indent } @l;
-
-	my @m = @l ? @{$l[$#l][1]} : ();
-	my ($t, $flag, @l2);
-	while ($data =~ 
-	       /^((
-                   [1-5]
-                   |
-                   (?:            (?: !\s*)? [0-9A-Z_]+(?:".*?")?)
-                   (?: \s*\|\|\s* (?: !\s*)? [0-9A-Z_]+(?:".*?")?)*
-                  )
-                  (?:\s+|$)
-                 )(.*)/x) { #@")) {
-	    ($t, $flag, $data) = ($1,$2,$3);
-	    while ($flag =~ s,^\s*(("[^"]*"|[^"\s]*)*)\s+,$1,) {}
-	    my $ok = 0;
-	    $flag = join('||', grep { 
-		if (my ($inv, $p) = /^(!)?HW"(.*)"/) {
-		    ($inv xor detect_devices::matching_desc($p)) and $ok = 1;
-		    0;
-		} else {
-		    1;
-		}
-	    } split '\|\|', $flag);
-	    push @m, $ok ? 'TRUE' : $flag || 'FALSE';
-	    push @l2, [ length $indent, [ @m ] ];
-	    $indent .= $t;
-	}
-	if ($data) {
-	    # has packages on same line
-	    my ($rate) = grep { /^\d$/ } @m or die sprintf qq(missing rate for "%s" at line %d (flags are %s)\n), $data, $line_nb, join('&&', @m);
-	    foreach (split ' ', $data) {
-		if ($packages) {
-		    my $p = packageByName($packages, $_) or next;
-		    my @m2 = 
-		      map { if_($_ && packageName($_) =~ /locales-(.*)/, qq(LOCALES"$1")) }
-		      map { packageById($packages, $_) } packageDepsId($p);
-
-		    my @m3 = ((grep { !/^\d$/ } @m), @m2);
-		    if (member('INSTALL', @m3)) {
-			member('NOCOPY', @m3) or push @{$packages->{needToCopy} ||= []}, $_;
-			next; #- don't need to put INSTALL flag for a package.
-		    }
-		    if (packageRate($p)) {
-			my ($rate2, @m4) = packageRateRFlags($p);
-			if (@m3 > 1 || @m4 > 1) {
-			    log::l("can't handle complicate flags for packages appearing twice ($_)");
-			    $fatal_error++;
-			}
-			log::l("package $_ appearing twice with different rates ($rate != $rate2)") if $rate != $rate2;
-			packageSetRateRFlags($p, $rate, "$m3[0]||$m4[0]");
-		    } else {
-			packageSetRateRFlags($p, $rate, @m3);
-		    }
-		} else {
-		    print "$_ = ", join(" && ", @m), "\n";
-		}
-	    }
-	    push @l, @l2;
-	} else {
-	    push @l, [ $l2[0][0], $l2[$#l2][1] ];
-	}
-    }
-    $fatal_error and die "$fatal_error fatal errors in rpmsrate";
-}
-
-sub readCompssUsers {
-    my ($meta_class) = @_;
-    my (%compssUsers, @sorted, $l);
-
-    my $file = 'Mandrake/base/compssUsers';
-    my $f = $meta_class && install_any::getFile("$file.$meta_class") || install_any::getFile($file) or die "can't find $file";
-    local $_;
-    while (<$f>) {
-	/^\s*$/ || /^#/ and next;
-	s/#.*//;
-
-	if (/^(\S.*)/) {
-	    my $verbatim = $_;
-	    my ($icon, $descr, $path);
-	    /^(.*?)\s*\[path=(.*?)\](.*)/  and $_ = "$1$3", $path  = $2;
-	    /^(.*?)\s*\[icon=(.*?)\](.*)/  and $_ = "$1$3", $icon  = $2;
-	    /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2;
-	    $compssUsers{"$path|$_"} = { label => $_, verbatim => $verbatim, path => $path, icons => $icon, descr => $descr, flags => $l=[] };
-	    push @sorted, "$path|$_";
-	} elsif (/^\s+(.*?)\s*$/) {
-	    push @$l, $1;
-	}
-    }
-    \%compssUsers, \@sorted;
-}
-sub saveCompssUsers {
-    my ($prefix, $packages, $compssUsers, $sorted) = @_;
-    my $flat;
-    foreach (@$sorted) {
-	my @fl = @{$compssUsers->{$_}{flags}};
-	my %fl; $fl{$_} = 1 foreach @fl;
-	$flat .= $compssUsers->{$_}{verbatim};
-	foreach my $p (values %{$packages->{names}}) {
-	    my ($rate, @flags) = packageRateRFlags($p);
-	    if ($rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags) {
-		$flat .= sprintf "\t%d %s\n", $rate, packageName($p);
-	    }
-	}
-    }
-    output "$prefix/var/lib/urpmi/compssUsers.flat", $flat;
-}
-
-sub setSelectedFromCompssList {
-    my ($packages, $compssUsersChoice, $min_level, $max_size, $otherOnly) = @_;
-    $compssUsersChoice->{TRUE} = 1; #- ensure TRUE is set
-    my $nb = selectedSize($packages);
-    foreach my $p (sort { packageRate($b) <=> packageRate($a) } values %{$packages->{names}}) {
-	my ($rate, @flags) = packageRateRFlags($p);
-	next if 
-	  !$rate || $rate < $min_level || 
-	  grep { !grep { /^!(.*)/ ? !$compssUsersChoice->{$1} : $compssUsersChoice->{$_} } split('\|\|') } @flags;
-
-	#- determine the packages that will be selected when
-	#- selecting $p. the packages are not selected.
-	my %newSelection;
-	selectPackage($packages, $p, 0, \%newSelection);
-
-	#- this enable an incremental total size.
-	my $old_nb = $nb;
-	foreach (grep { $newSelection{$_} } keys %newSelection) {
-	    $nb += packageSize($packages->{names}{$_});
-	}
-	if ($max_size && $nb > $max_size) {
-	    $nb = $old_nb;
-	    $min_level = packageRate($p);
-	    last;
-	}
-
-	#- at this point the package can safely be selected.
-	if ($otherOnly) {
-	    selectPackage($packages, $p, 0, $otherOnly);
-	} else {
-	    selectPackage($packages, $p);
-	}
-    }
-    unless ($otherOnly) {
-	log::l("setSelectedFromCompssList: reached size ", formatXiB($nb), ", up to indice $min_level (less than ", formatXiB($max_size), ")");
-	log::l("setSelectedFromCompssList: ", join(" ", sort map { packageName($_) } grep { packageFlagSelected($_) } @{$packages->{depslist}}));
-    }
-    $min_level;
-}
-
-#- usefull to know the size it would take for a given min_level/max_size
-#- just saves the selected packages, call setSelectedFromCompssList and restores the selected packages
-sub saveSelected {
-    my ($packages) = @_;
-    my @l = values %{$packages->{names}};
-    my @flags = map { packageFlagSelected($_) } @l;
-    [ $packages, \@l, \@flags ];
-}
-sub restoreSelected {
-    my ($packages, $l, $flags) = @{$_[0]};
-    mapn { packageSetFlagSelected(@_) } $l, $flags;
-}
-
-sub computeGroupSize {
-    my ($packages, $min_level) = @_;
-
-    sub inside {
-	my ($l1, $l2) = @_;
-	my $i = 0;
-	return if @$l1 > @$l2;
-	foreach (@$l1) {
-	    my $c;
-	    while ($c = $l2->[$i++] cmp $_ ) {
-		return if $c == 1 || $i > @$l2;
-	    }
-	}
-	1;
-    }
-
-    sub or_ify {
-	my ($first, @other) = @_;
-	my @l = split('\|\|', $first);
-	foreach (@other) {
-	    @l = map {
-		my $n = $_;
-		map { "$_&&$n" } @l;
-	    } split('\|\|');
-	}
-	#- HACK, remove LOCALES & CHARSET, too costly
-	grep { !/LOCALES|CHARSET/ } @l;
-    }
-    sub or_clean {
-	my (@l) = map { [ sort split('&&') ] } @_ or return '';
-	my @r;
-	B: while (@l) {
-	    my $e = shift @l;
-	    foreach (@r, @l) {
-		inside($e, $_) and next B;
-	    }
-	    push @r, $e;
-	}
-	join("\t", map { join('&&', @$_) } @r);
-    }
-    my (%group, %memo);
-
-    foreach my $p (values %{$packages->{names}}) {
-	my ($rate, @flags) = packageRateRFlags($p);
-	next if !$rate || $rate < $min_level;
-
-	my $flags = join("\t", @flags = or_ify(@flags));
-	$group{packageName($p)} = ($memo{$flags} ||= or_clean(@flags));
-
-	#- determine the packages that will be selected when selecting $p. the packages are not selected.
-	my %newSelection;
-	selectPackage($packages, $p, 0, \%newSelection);
-	foreach (grep { $newSelection{$_} } keys %newSelection) {
-	    my $s = $group{$_} || do {
-		$packages->{names}{$_}[$VALUES] =~ /\t(.*)/;
-		join("\t", or_ify(split("\t", $1)));
-	    };
-	    next if length($s) > 80; # HACK, truncated too complicated expressions, too costly
-	    my $m = "$flags\t$s";
-	    $group{$_} = ($memo{$m} ||= or_clean(@flags, split("\t", $s)));
-	}
-    }
-    my (%sizes, %pkgs);
-    while (my ($k, $v) = each %group) {
-	push @{$pkgs{$v}}, $k;
-	$sizes{$v} += packageSize($packages->{names}{$k});
-    }
-    log::l(sprintf "%s %dMB %s", $_, $sizes{$_} / sqr(1024), join(',', @{$pkgs{$_}})) foreach keys %sizes;
-    \%sizes, \%pkgs;
-}
-
-
-sub init_db {
-    my ($prefix) = @_;
-
-    my $f = "$prefix/root/drakx/install.log";
-    open(LOG, ">> $f") ? log::l("opened $f") : log::l("Failed to open $f. No install log will be kept.");
-    *LOG or *LOG = log::F() or *LOG = *STDERR;
-    CORE::select((CORE::select(LOG), $| = 1)[0]);
-    c::rpmErrorSetCallback(fileno LOG);
-#-    c::rpmSetVeryVerbose();
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-}
-
-sub rebuild_db_open_for_traversal {
-    my ($packages, $prefix) = @_;
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-
-    unless (exists $packages->{rebuild_db}) {
-	if (my $pid = fork()) {
-	    waitpid $pid, 0;
-	    ($? & 0xff00) and die "rebuilding of rpm database failed";
-	} else {
-	    log::l("rebuilding rpm database");
-	    my $rebuilddb_dir = "$prefix/var/lib/rpmrebuilddb.$$";
-	    -d $rebuilddb_dir and log::l("removing stale directory $rebuilddb_dir"), rm_rf($rebuilddb_dir);
-
-	    c::rpmdbRebuild($prefix) or log::l("rebuilding of rpm database failed: ". c::rpmErrorString()), c::_exit(2);
-
-	    c::_exit(0);
-	}
-	$packages->{rebuild_db} = undef;
-    }
-
-    my $db = c::rpmdbOpenForTraversal($prefix) or die "unable to open $prefix/var/lib/rpm/Packages";
-    log::l("opened rpm database for examining existing packages");
-
-    $db;
-}
-
-sub clean_old_rpm_db {
-    my ($prefix) = @_;
-    my $failed;
-
-    foreach (qw(Basenames Conflictname Group Name Packages Providename Requirename Triggername)) {
-	-s "$prefix/var/lib/rpm/$_" or $failed = 'failed';
-    }
-    #- rebuilding has been successfull, so remove old rpm database if any.
-    #- once we have checked the rpm4 db file are present and not null, in case
-    #- of doubt, avoid removing them...
-    unless ($failed) {
-	log::l("rebuilding rpm database completed successfully");
-	foreach (qw(conflictsindex.rpm fileindex.rpm groupindex.rpm nameindex.rpm packages.rpm
-                    providesindex.rpm requiredby.rpm triggerindex.rpm)) {
-	    -e "$prefix/var/lib/rpm/$_" or next;
-	    log::l("removing old rpm file $_");
-	    rm_rf("$prefix/var/lib/rpm/$_");
-	}
-    }
-}
-
-sub done_db {
-    log::l("closing install.log file");
-    close LOG;
-}
-
-sub versionCompare($$) {
-    goto &c::rpmvercmp;
-}
-#- old code using perl version, still broken on some case.
-#-    my ($a, $b) = @_;
-#-    local $_;
-#-
-#-    while ($a || $b) {
-#-	my ($sb, $sa) =  map { $1 if $a =~ /^\W*\d/ ? s/^\W*0*(\d+)// : s/^\W*(\D*)// } ($b, $a);
-#-	$_ = ($sa =~ /^\d/ || $sb =~ /^\d/) && length($sa) <=> length($sb) || $sa cmp $sb and return $_ || 0;
-#-	$sa eq '' && $sb eq '' and return $a cmp $b || 0;
-#-    }
-
-sub selectPackagesAlreadyInstalled {
-    my ($packages, $prefix) = @_;
-
-    #- avoid rebuilding the database if such case.
-    $packages->{rebuild_db} = "oem does not need rebuilding the rpm db";
-    my $db = rebuild_db_open_for_traversal($packages, $prefix);
-
-    #- this method has only one objectif, check the presence of packages
-    #- already installed and avoid installing them again. this is to be used
-    #- with oem installation, if the database exists, preselect the packages
-    #- installed WHATEVER their version/release (log if a problem is perceived
-    #- is enough).
-    c::rpmdbTraverse($db, sub {
-			 my ($header) = @_;
-			 my $p = $packages->{names}{c::headerGetEntry($header, 'name')};
-
-			 if ($p) {
-			     my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
-			     my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
-										 packageVersion($p));
-			     my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
-			       ($version_cmp > 0 || $version_cmp == 0 &&
-				versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
-			     $version_rel_test or log::l("keeping an older package, avoiding selecting $p->[$FILE]");
-			     packageSetFlagInstalled($p, 1);
-			 }
-		     });
-
-    #- close db, job finished !
-    c::rpmdbClose($db);
-    log::l("done selecting packages to upgrade");
-}
-
-sub selectPackagesToUpgrade($$$;$$) {
-    my ($packages, $prefix, $base, $toRemove, $toSave) = @_;
-    local $_; #- else perl complains on the map { ... } grep { ... } @...;
-
-    local (*UPGRADE_INPUT, *UPGRADE_OUTPUT); pipe UPGRADE_INPUT, UPGRADE_OUTPUT;
-    if (my $pid = fork()) {
-	@{$toRemove || []} = (); #- reset this one.
-
-	close UPGRADE_OUTPUT;
-	while (<UPGRADE_INPUT>) {
-	    chomp;
-	    my ($action, $name) = /^([\w\d]*):(.*)/;
-	    for ($action) {
-		/remove/    and do { push @$toRemove, $name; next };
-		/keepfiles/ and do { push @$toSave, $name; next };
-
-		my $p = $packages->{names}{$name} or die "unable to find package ($name)";
-		/^\d*$/     and do { $p->[$INSTALLED_CUMUL_SIZE] = $action; next };
-		/installed/ and do { packageSetFlagInstalled($p, 1); next };
-		/select/    and do { selectPackage($packages, $p); next };
-
-		die "unknown action ($action)";
-	    }
-	}
-	close UPGRADE_INPUT;
-	waitpid $pid, 0;
-    } else {
-	close UPGRADE_INPUT;
-	
-	my $db = rebuild_db_open_for_traversal($packages, $prefix);
-	#- used for package that are not correctly updated.
-	#- should only be used when nothing else can be done correctly.
-	my %upgradeNeedRemove = (
-#				 'libstdc++' => 1,
-#				 'compat-glibc' => 1,
-#				 'compat-libs' => 1,
-				);
-
-	#- generel purpose for forcing upgrade of package whatever version is.
-	my %packageNeedUpgrade = (
-				  #'lilo' => 1, #- this package has been misnamed in 7.0.
-				 );
-
-	#- help removing package which may have different release numbering
-	my %toRemove; map { $toRemove{$_} = 1 } @{$toRemove || []};
-
-	#- help searching package to upgrade in regard to already installed files.
-	my %installedFilesForUpgrade;
-
-	#- help keeping memory by this set of package that have been obsoleted.
-	my %obsoletedPackages;
-
-	#- make a subprocess here for reading filelist, this is important
-	#- not to waste a lot of memory for the main program which will fork
-	#- latter for each transaction.
-	local (*INPUT, *OUTPUT_CHILD); pipe INPUT, OUTPUT_CHILD;
-	local (*INPUT_CHILD, *OUTPUT); pipe INPUT_CHILD, OUTPUT;
-	if (my $pid = fork()) {
-	    close INPUT_CHILD;
-	    close OUTPUT_CHILD;
-	    select((select(OUTPUT), $| = 1)[0]);
-
-	    #- internal reading from interactive mode of parsehdlist.
-	    #- takes a code to call with the line read, this avoid allocating
-	    #- memory for that.
-	    my $ask_child = sub {
-		my ($name, $tag, $code) = @_;
-		$code or die "no callback code for parsehdlist output";
-		print OUTPUT "$name:$tag\n";
-
-		local $_;
-		while (<INPUT>) {
-		    chomp;
-		    /^\s*$/ and last;
-		    $code->($_);
-		}
-	    };
-
-	    #- select packages which obseletes other package, obselete package are not removed,
-	    #- should we remove them ? this could be dangerous !
-	    foreach my $p (values %{$packages->{names}}) {
-		$ask_child->(packageName($p), "obsoletes", sub {
-				 #- take care of flags and version and release if present
-				 local ($_) = @_;
-				 if (my ($n,$o,$v,$r) = /^(\S*)\s*(\S*)\s*([^\s-]*)-?(\S*)/) {
-				     my $obsoleted = 0;
-				     my $check_obsoletes = sub {
-					 my ($header) = @_;
-					 (!$v || eval(versionCompare(c::headerGetEntry($header, 'version'), $v) . $o . 0)) &&
-					   (!$r || versionCompare(c::headerGetEntry($header, 'version'), $v) != 0 ||
-					    eval(versionCompare(c::headerGetEntry($header, 'release'), $r) . $o . 0)) or return;
-					 ++$obsoleted;
-				     };
-				     c::rpmdbNameTraverse($db, $n, $check_obsoletes);
-				     if ($obsoleted > 0) {
-					 log::l("selecting " . packageName($p) . " by selection on obsoletes");
-					 $obsoletedPackages{$1} = undef;
-					 selectPackage($packages, $p);
-				     }
-				 }
-			     });
-	    }
-
-	    #- mark all files which are not in /etc/rc.d/ for packages which are already installed but which
-	    #- are not in the packages list to upgrade.
-	    #- the 'installed' property will make a package unable to be selected, look at select.
-	    c::rpmdbTraverse($db, sub {
-				 my ($header) = @_;
-				 my $otherPackage = (c::headerGetEntry($header, 'release') !~ /mdk\w*$/ &&
-						     (c::headerGetEntry($header, 'name'). '-' .
-						      c::headerGetEntry($header, 'version'). '-' .
-						      c::headerGetEntry($header, 'release')));
-				 my $p = $packages->{names}{c::headerGetEntry($header, 'name')};
-
-				 if ($p) {
-				     my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
-				     my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
-											 packageVersion($p));
-				     my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
-				       ($version_cmp > 0 || $version_cmp == 0 &&
-					versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
-				     if ($packageNeedUpgrade{packageName($p)}) {
-					 log::l("package ". packageName($p) ." need to be upgraded");
-				     } elsif ($version_rel_test) { #- by default, package are upgraded whatever version is !
-					 if ($otherPackage && $version_cmp <= 0) {
-					     log::l("force upgrading $otherPackage since it will not be updated otherwise");
-					 } else {
-					     #- let the parent known this installed package.
-					     print UPGRADE_OUTPUT "installed:" . packageName($p) . "\n";
-					     packageSetFlagInstalled($p, 1);
-					 }
-				     } elsif ($upgradeNeedRemove{packageName($p)}) {
-					 my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
-							     c::headerGetEntry($header, 'version'). '-' .
-							     c::headerGetEntry($header, 'release'));
-					 log::l("removing $otherPackage since it will not upgrade correctly!");
-					 $toRemove{$otherPackage} = 1; #- force removing for theses other packages, select our.
-				     }
-				 } else {
-				     if (exists $obsoletedPackages{c::headerGetEntry($header, 'name')}) {
-					 my @files = c::headerGetEntry($header, 'filenames');
-					 @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
-									   ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
-				     }
-				 }
-			     });
-
-	    #- find new packages to upgrade.
-	    foreach my $p (values %{$packages->{names}}) {
-		my $skipThis = 0;
-		my $count = c::rpmdbNameTraverse($db, packageName($p), sub {
-						     my ($header) = @_;
-						     $skipThis ||= packageFlagInstalled($p);
-						 });
-
-		#- skip if not installed (package not found in current install).
-		$skipThis ||= ($count == 0);
-
-		#- make sure to upgrade package that have to be upgraded.
-		$packageNeedUpgrade{packageName($p)} and $skipThis = 0;
-
-		#- select the package if it is already installed with a lower version or simply not installed.
-		unless ($skipThis) {
-		    my $cumulSize;
-
-		    selectPackage($packages, $p);
-
-		    #- keep in mind installed files which are not being updated. doing this costs in
-		    #- execution time but use less memory, else hash all installed files and unhash
-		    #- all file for package marked for upgrade.
-		    c::rpmdbNameTraverse($db, packageName($p), sub {
-					     my ($header) = @_;
-					     $cumulSize += c::headerGetEntry($header, 'size');
-					     my @files = c::headerGetEntry($header, 'filenames');
-					     @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
-									   ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
-					 });
-
-		    $ask_child->(packageName($p), "files", sub {
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-
-		    #- keep in mind the cumul size of installed package since they will be deleted
-		    #- on upgrade, only for package that are allowed to be upgraded.
-		    if (allowedToUpgrade(packageName($p))) {
-			print UPGRADE_OUTPUT "$cumulSize:" . packageName($p) . "\n";
-		    }
-		}
-	    }
-
-	    #- unmark all files for all packages marked for upgrade. it may not have been done above
-	    #- since some packages may have been selected by depsList.
-	    foreach my $p (values %{$packages->{names}}) {
-		if (packageFlagSelected($p)) {
-		    $ask_child->(packageName($p), "files", sub {
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-		}
-	    }
-
-	    #- select packages which contains marked files, then unmark on selection.
-	    #- a special case can be made here, the selection is done only for packages
-	    #- requiring locales if the locales are selected.
-	    #- another special case are for devel packages where fixes over the time has
-	    #- made some files moving between the normal package and its devel couterpart.
-	    #- if only one file is affected, no devel package is selected.
-	    foreach my $p (values %{$packages->{names}}) {
-		unless (packageFlagSelected($p)) {
-		    my $toSelect = 0;
-		    $ask_child->(packageName($p), "files", sub {
-				     if ($_[0] !~ m|^/dev/| && $_[0] !~  m|^/etc/rc.d/| &&  $_ !~ m|\.la$| && exists $installedFilesForUpgrade{$_[0]}) {
-					 ++$toSelect if ! -d "$prefix/$_[0]" && ! -l "$prefix/$_[0]";
-				     }
-				     delete $installedFilesForUpgrade{$_[0]};
-				 });
-		    if ($toSelect) {
-			if ($toSelect <= 1 && packageName($p) =~ /-devel/) {
-			    log::l("avoid selecting " . packageName($p) . " as not enough files will be updated");
-			} else {
-			    #- default case is assumed to allow upgrade.
-			    my @deps = map { my $p = packageById($packages, $_);
-					     if_($p && packageName($p) =~ /locales-/, $p) } packageDepsId($p);
-			    if (@deps == 0 || @deps > 0 && (grep { !packageFlagSelected($_) } @deps) == 0) {
-				log::l("selecting " . packageName($p) . " by selection on files");
-				selectPackage($packages, $p);
-			    } else {
-				log::l("avoid selecting " . packageName($p) . " as its locales language is not already selected");
-			    }
-			}
-		    }
-		}
-	    }
-
-	    #- clean memory...
-	    %installedFilesForUpgrade = ();
-
-	    #- no need to still use the child as this point, we can let him to terminate.
-	    close OUTPUT;
-	    close INPUT;
-	    waitpid $pid, 0;
-	} else {
-	    close INPUT;
-	    close OUTPUT;
-	    open STDIN, "<&INPUT_CHILD";
-	    open STDOUT, ">&OUTPUT_CHILD";
-	    exec if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), "parsehdlist", "--interactive", map { "/tmp/$_->{hdlist}" } values %{$packages->{mediums}}
-	      or c::_exit(1);
-	}
-
-	#- let the parent known about what we found here!
-	foreach my $p (values %{$packages->{names}}) {
-	    print UPGRADE_OUTPUT "select:" . packageName($p) . "\n" if packageFlagSelected($p);
-	}
-
-	#- clean false value on toRemove.
-	delete $toRemove{''};
-
-	#- get filenames that should be saved for packages to remove.
-	#- typically config files, but it may broke for packages that
-	#- are very old when compabilty has been broken.
-	#- but new version may saved to .rpmnew so it not so hard !
-	if ($toSave && keys %toRemove) {
-	    c::rpmdbTraverse($db, sub {
-				 my ($header) = @_;
-				 my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
-						     c::headerGetEntry($header, 'version'). '-' .
-						     c::headerGetEntry($header, 'release'));
-				 if ($toRemove{$otherPackage}) {
-				     print UPGRADE_OUTPUT "remove:$otherPackage\n";
-				     if (packageFlagBase($packages->{names}{c::headerGetEntry($header, 'name')})) {
-					 delete $toRemove{$otherPackage}; #- keep it selected, but force upgrade.
-				     } else {
-					 my @files = c::headerGetEntry($header, 'filenames');
-					 my @flags = c::headerGetEntry($header, 'fileflags');
-					 for my $i (0..$#flags) {
-					     if ($flags[$i] & c::RPMFILE_CONFIG()) {
-						 print UPGRADE_OUTPUT "keepfiles:$files[$i]\n" unless $files[$i] =~ /kdelnk/;
-					     }
-					 }
-				     }
-				 }
-			     });
-	}
-
-	#- close db, job finished !
-	c::rpmdbClose($db);
-	log::l("done selecting packages to upgrade");
-
-	close UPGRADE_OUTPUT;
-	c::_exit(0);
-    }
-
-    #- keep a track of packages that are been selected for being upgraded,
-    #- these packages should not be unselected (unless expertise)
-    foreach my $p (values %{$packages->{names}}) {
-	packageSetFlagUpgrade($p, 1) if packageFlagSelected($p);
-    }
-}
-
-sub allowedToUpgrade { $_[0] !~ /^(kernel|kernel22|kernel2.2|kernel-secure|kernel-smp|kernel-linus|kernel-linus2.2|hackkernel|kernel-enterprise)$/ }
-
-sub installCallback {
-#    my $msg = shift;
-#    log::l($msg .": ". join(',', @_));
-}
-
-sub install($$$;$$) {
-    my ($prefix, $isUpgrade, $toInstall, $depOrder, $media) = @_;
-    my %packages;
-
-    return if $::g_auto_install || !scalar(@$toInstall);
-
-    #- for root loopback'ed /boot
-    my $loop_boot = loopback::prepare_boot($prefix);
-
-    #- first stage to extract some important informations
-    #- about the packages selected. this is used to select
-    #- one or many transaction.
-    my ($total, $nb);
-    foreach my $pkg (@$toInstall) {
-	$packages{packageName($pkg)} = $pkg;
-	$nb++;
-	$total += to_int($pkg->[$SIZE_DEPS]); #- do not correct for upgrade!
-    }
-
-    log::l("pkgs::install $prefix");
-    log::l("pkgs::install the following: ", join(" ", keys %packages));
-    eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";
-
-    init_db($prefix);
-
-    my $callbackOpen = sub {
-	my $p = $packages{$_[0]} or log::l("unable to retrieve package of $_[0]"), return -1;
-	my $f = packageFile($p);
-	print LOG "$f $media->{$p->[$MEDIUM]}{descr}\n";
-	my $fd = install_any::getFile($f, $media->{$p->[$MEDIUM]}{descr});
-	$fd ? fileno $fd : -1;
-    };
-    my $callbackClose = sub { packageSetFlagInstalled($packages{$_[0]}, 1) };
-
-    #- do not modify/translate the message used with installCallback since
-    #- these are keys during progressing installation, or change in other
-    #- place (install_steps_gtk.pm,...).
-    installCallback("Starting installation", $nb, $total);
-
-    my ($i, $min, $medium) = (0, 0, 1);
-    do {
-	my @transToInstall;
-
-	if (!$depOrder || !$media) {
-	    @transToInstall = values %packages;
-	    $nb = 0;
-	} else {
-	    do {
-		#- change current media if needed.
-		if ($i > $media->{$medium}{max}) {
-		    #- search for media that contains the desired package to install.
-		    foreach (keys %$media) {
-			$i >= $media->{$_}{min} && $i <= $media->{$_}{max} and $medium = $_, last;
-		    }
-		}
-		$i >= $media->{$medium}{min} && $i <= $media->{$medium}{max} or die "unable to find right medium";
-		install_any::useMedium($medium);
-
-		while ($i <= $media->{$medium}{max} && ($i < $min || scalar @transToInstall < $limitMinTrans)) {
-		    my $pkg = $depOrder->[$i++] or next;
-		    my $dep = $packages{packageName($pkg)} or next;
-		    if ($media->{$dep->[$MEDIUM]}{selected}) {
-			push @transToInstall, $dep;
-			foreach (map { split '\|' } packageDepsId($dep)) {
-			    $min < $_ and $min = $_;
-			}
-		    } else {
-			log::l("ignoring package $dep->[$FILE] as its medium is not selected");
-		    }
-		    --$nb; #- make sure the package is not taken into account as its medium is not selected.
-		}
-	    } while ($nb > 0 && scalar(@transToInstall) == 0); #- avoid null transaction, it a nop that cost a bit.
-	}
-
-	#- added to exit typically after last media unselected.
-	if ($nb == 0 && scalar(@transToInstall) == 0) {
-	    cleanHeaders($prefix);
-
-	    loopback::save_boot($loop_boot);
-	    return;
-	}
-
-	#- extract headers for parent as they are used by callback.
-	extractHeaders($prefix, \@transToInstall, $media);
-
-	if ($media->{$medium}{method} eq 'cdrom') {
-	    #- extract packages to make sure the getFile below to force
-	    #- accessing medium will not be redirected to updates.
-	    my @origin = grep { $_->[$MEDIUM] == $medium } @transToInstall;
-
-	    if (@origin) {
-		#- reset file descriptor open for main process but
-		#- make sure error trying to change from hdlist are
-		#- trown from main process too.
-		install_any::getFile(packageFile($origin[0]), $media->{$origin[0][$MEDIUM]}{descr});
-
-		#- allow some log here to check selected status.
-		log::l("status for medium $origin[0][$MEDIUM] ($media->{$origin[0][$MEDIUM]}{descr}) is " .
-		       ($media->{$origin[0][$MEDIUM]}{selected} ? "selected" : "refused"));
-	    }
-	}
-	#- and make sure there are no staling open file descriptor too (before forking)!
-	install_any::getFile('XXX');
-
-	my ($retry_package, $retry_count);
-	while ($retry_package || @transToInstall) {
-	    local (*INPUT, *OUTPUT); pipe INPUT, OUTPUT;
-	    if (my $pid = fork()) {
-		close OUTPUT;
-		my $error_msg = '';
-		local $_;
-		while (<INPUT>) {
-		    if (/^die:(.*)/) {
-			$error_msg = $1;
-			last;
-		    } else {
-			chomp;
-			my @params = split ":";
-			if ($params[0] eq 'close') {
-			    &$callbackClose($params[1]);
-			} else {
-			    installCallback(@params);
-			}
-		    }
-		}
-		$error_msg and $error_msg .= join('', <INPUT>);
-		waitpid $pid, 0;
-		close INPUT;
-		$error_msg and die $error_msg;
-	    } else {
-		#- child process will run each transaction.
-		$SIG{SEGV} = sub { log::l("segmentation fault on transactions"); c::_exit(0) };
-		my @prev_pids = grep { /^\d+$/ } all("/proc");
-		my $db;
-		eval {
-		    close INPUT;
-		    select((select(OUTPUT),  $| = 1)[0]);
-		    $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
-		    my $trans = c::rpmtransCreateSet($db, $prefix);
-		    if ($retry_package) {
-			log::l("opened rpm database for retry transaction of 1 package only");
-			c::rpmtransAddPackage($trans, $retry_package->[$HEADER], packageName($retry_package),
-					      $isUpgrade && allowedToUpgrade(packageName($retry_package)));
-		    } else {
-			log::l("opened rpm database for transaction of ". scalar @transToInstall ." new packages, still $nb after that to do");
-			c::rpmtransAddPackage($trans, $_->[$HEADER], packageName($_),
-					      $isUpgrade && allowedToUpgrade(packageName($_)))
-			    foreach @transToInstall;
-		    }
-
-		    c::rpmdepOrder($trans) or die "error ordering package list: " . c::rpmErrorString();
-		    c::rpmtransSetScriptFd($trans, fileno LOG);
-
-		    log::l("rpmRunTransactions start");
-		    my @probs = c::rpmRunTransactions($trans, $callbackOpen,
-						      sub { #- callbackClose
-							  my $p = $packages{$_[0]} or return;
-							  my $check_installed;
-							  c::rpmdbNameTraverse($db, packageName($p), sub {
-										   my ($header) = @_;
-										   $check_installed ||= c::headerGetEntry($header, 'version') eq packageVersion($p) && c::headerGetEntry($header, 'release') eq packageRelease($p);
-									       });
-							  $check_installed and print OUTPUT "close:$_[0]\n"; },
-						      sub { #- installCallback
-							  print OUTPUT join(":", @_), "\n"; },
-						      1);
-		    log::l("rpmRunTransactions done, now trying to close still opened fd");
-		    install_any::getFile('XXX'); #- close still opened fd.
-
-		    if (@probs) {
-			my %parts;
-			@probs = reverse grep {
-			    if (s/(installing package) .* (needs (?:.*) on the (.*) filesystem)/$1 $2/) {
-				$parts{$3} ? 0 : ($parts{$3} = 1);
-			    } else {
-				1;
-			    }
-			} reverse map { s|/mnt||; $_ } @probs;
-
-			c::rpmdbClose($db);
-			die "installation of rpms failed:\n  ", join("\n  ", @probs);
-		    }
-		}; $@ and print OUTPUT "die:$@\n";
-
-		c::rpmdbClose($db);
-		log::l("rpm database closed");
-
-		close OUTPUT;
-
-		#- now search for child process which may be locking the cdrom, making it unable to be ejected.
-		my @allpids = grep { /^\d+$/ } all("/proc");
-		my %ppids;
-		foreach (@allpids) {
-		    cat_("/proc/$_/status") =~ /^PPid:\s+(\d+)/m;
-		    push @{$ppids{$1 || 1}}, $_;
-		}
-		my @killpid = difference2(\@allpids, [ @prev_pids, 
-						       difference2([ $$, hashtree2list(getppid, \%ppids) ],
-								   [ hashtree2list($$, \%ppids) ]) ]);
-	
-		if (@killpid) {
-		    log::l("ERROR: DrakX should not have to clean the packages shit. Killing ". join(", ", @killpid));
-		    kill 15, @killpid;
-		    sleep 2;
-		    kill 9, @killpid;
-		}
-
-		c::_exit(0);
-	    }
-
-	    #- if we are using a retry mode, this means we have to split the transaction with only
-	    #- one package for each real transaction.
-	    unless ($retry_package) {
-		my @badPackages;
-		foreach (@transToInstall) {
-		    if (!packageFlagInstalled($_) && $media->{$_->[$MEDIUM]}{selected} && !exists($ignoreBadPkg{packageName($_)})) {
-			push @badPackages, $_;
-			log::l("bad package $_->[$FILE]");
-		    } else {
-			packageFreeHeader($_);
-		    }
-		}
-		@transToInstall = @badPackages;
-		#- if we are in retry mode, we have to fetch only one package at a time.
-		$retry_package = shift @transToInstall;
-		$retry_count = 3;
-	    } else {
-		if (!packageFlagInstalled($retry_package) && $media->{$retry_package->[$MEDIUM]}{selected} && !exists($ignoreBadPkg{packageName($retry_package)})) {
-		    if ($retry_count) {
-			log::l("retrying installing package $retry_package->[$FILE] alone in a transaction");
-			--$retry_count;
-		    } else {
-			log::l("bad package $retry_package->[$FILE] unable to be installed");
-			packageSetFlagSelected($retry_package, 0);
-			cdie ("error installing package list: $retry_package->[$FILE]");
-		    }
-		}
-		if (packageFlagInstalled($retry_package) || ! packageFlagSelected($retry_package)) {
-		    packageFreeHeader($retry_package);
-		    $retry_package = shift @transToInstall;
-		    $retry_count = 3;
-		}
-	    }
-	}
-	cleanHeaders($prefix);
-    } while ($nb > 0 && !$pkgs::cancel_install);
-
-    done_db();
-
-    cleanHeaders($prefix);
-
-    loopback::save_boot($loop_boot);
-}
-
-sub remove($$) {
-    my ($prefix, $toRemove) = @_;
-
-    return if $::g_auto_install || !@{$toRemove || []};
-
-    log::l("reading /usr/lib/rpm/rpmrc");
-    c::rpmReadConfigFiles() or die "can't read rpm config files";
-    log::l("\tdone");
-
-    my $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
-    log::l("opened rpm database for removing old packages");
-
-    my $trans = c::rpmtransCreateSet($db, $prefix);
-
-    foreach my $p (@$toRemove) {
-	#- stuff remove all packages that matches $p, not a problem since $p has name-version-release format.
-	c::rpmtransRemovePackages($db, $trans, $p) if allowedToUpgrade($p);
-    }
-
-    eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";
-
-    my $callbackOpen = sub { log::l("trying to open file from $_[0] which should not happen"); };
-    my $callbackClose = sub { log::l("trying to close file from $_[0] which should not happen"); };
-
-    #- we are not checking depends since it should come when
-    #- upgrading a system. although we may remove some functionalities ?
-
-    #- do not modify/translate the message used with installCallback since
-    #- these are keys during progressing installation, or change in other
-    #- place (install_steps_gtk.pm,...).
-    installCallback("Starting removing other packages", scalar @$toRemove);
-
-    if (my @probs = c::rpmRunTransactions($trans, $callbackOpen, $callbackClose, \&installCallback, 1)) {
-	die "removing of old rpms failed:\n  ", join("\n  ", @probs);
-    }
-    c::rpmtransFree($trans);
-    c::rpmdbClose($db);
-    log::l("rpm database closed");
-
-    #- keep in mind removing of these packages by cleaning $toRemove.
-    @{$toRemove || []} = ();
-}
-
-sub selected_leaves {
-    my ($packages) = @_;
-    my %l;
-
-    #- initialize l with all id, not couting base package.
-    foreach my $id (0 .. $#{$packages->{depslist}}) {
-	my $pkg = packageById($packages, $id) or next;
-	packageSelectedOrInstalled($pkg) && !packageFlagBase($pkg) or next;
-	$l{$id} = 1;
-    }
-
-    foreach my $id (keys %l) {
-	#- when a package is in a choice, increase its value in hash l, because
-	#- it has to be examined before when we will select them later.
-	#- NB: this number may be computed before to save time.
-	my $p = $packages->{depslist}[$id] or next;
-	foreach (packageDepsId($p)) {
-	    if (/\|/) {
-		foreach (split '\|') {
-		    exists $l{$_} or next;
-		    $l{$_} > 1 + $l{$id} or $l{$_} = 1 + $l{$id};
-		}
-	    }
-	}
-    }
-
-    #- at this level, we can remove selected packages that are already
-    #- required by other, but we have to sort according to choice usage.
-    foreach my $id (sort { $l{$b} <=> $l{$a} || $b <=> $a } keys %l) {
-	#- do not count already deleted id, else cycles will be removed.
-	$l{$id} or next;
-
-	my $p = $packages->{depslist}[$id] or next;
-	foreach (packageDepsId($p)) {
-	    #- choices need no more to be examined, this has been done above.
-	    /\|/ and next;
-	    #- improve value of this one, so it will be selected before.
-	    $l{$id} < $l{$_} and $l{$id} = $l{$_};
-	    $l{$_} = 0;
-	}
-    }
-
-    #- now sort again according to decrementing value, and gives packages name.
-    [ map { packageName($packages->{depslist}[$_]) } sort { $l{$b} <=> $l{$a} } grep { $l{$_} > 0 } keys %l ];
-}
-
-
-sub naughtyServers {
-    my ($packages) = @_;
-
-    my @old_81 = qw(
-freeswan
-);
-    my @old_82 = qw(
-vnc-server
-postgresql-server
-mon
-);
-
-    my @new_80 = qw(
-jabber
-FreeWnn
-MySQL
-am-utils
-apache
-boa
-cfengine
-cups
-drakxtools-http
-finger-server
-imap
-leafnode
-lpr
-ntp
-openssh-server
-pidentd
-postfix
-proftpd
-rwall
-rwho
-squid
-webmin
-wu-ftpd
-ypbind
-); # nfs-utils-clients portmap
-   # X server
-
-    my @new_81 = qw(
-apache-mod_perl
-ftp-server-krb5
-mcserv
-samba
-telnet-server-krb5
-ypserv
-);
-
-    my @new_82 = qw(
-LPRng
-bind
-httpd-naat
-ibod
-inn
-netatalk
-nfs-utils
-rusers-server
-samba-swat
-tftp-server
-ucd-snmp
-);
-
-    my @naughtyServers = (@new_80, @new_81, @new_82);
-
-    grep {
-	my $p = packageByName($packages, $_);
-	$p && packageFlagSelected($p);
-    } @naughtyServers;
-}
-
-sub hashtree2list {
-    my ($e, $h) = @_;
-    my @l;
-    my @todo = $e;
-    while (@todo) {
-	my $e = shift @todo;
-	push @l, $e;
-	push @todo, @{$h->{$e}};
-    }
-    @l;
-}
-
-1;
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
deleted file mode 100644
index c6478a2ad..000000000
--- a/perl-install/printer.pm
+++ /dev/null
@@ -1,2241 +0,0 @@
-package printer;
-
-# $Id$
-
-#use diagnostics;
-#use strict;
-
-
-use common;
-use run_program;
-
-#-if we are in an DrakX config
-my $prefix = "";
-
-#-location of the printer database in an installed system
-my $PRINTER_DB_FILE = "/usr/share/foomatic/db/compiled/overview.xml";
-#-configuration directory of Foomatic
-my $FOOMATICCONFDIR = "/etc/foomatic"; 
-#-location of the file containing the default spooler's name
-my $FOOMATIC_DEFAULT_SPOOLER = "$FOOMATICCONFDIR/defaultspooler";
-
-%spooler = (
-    _("CUPS - Common Unix Printing System") => "cups",
-    _("LPRng - LPR New Generation")         => "lprng",
-    _("LPD - Line Printer Daemon")          => "lpd",
-    _("PDQ - Print, Don't Queue")           => "pdq"
-#    _("PDQ - Marcia, click here!")           => "pdq"
-);
-%spooler_inv = reverse %spooler;
-
-%shortspooler = (
-    _("CUPS")   => "cups",
-    _("LPRng")  => "lprng",
-    _("LPD")    => "lpd",
-    _("PDQ")    => "pdq"
-);
-%shortspooler_inv = reverse %shortspooler;
-
-%lprcommand = (
-    "cups"   => "lpr-cups",
-    "lprng"  => "lpr-lpd",
-    "lpd"    => "lpr-lpd",
-    "pdq"    => "lpr-pdq"
-);
-
-%printer_type = (
-    _("Local printer")                              => "LOCAL",
-    _("Remote printer")                             => "REMOTE",
-    _("Printer on remote CUPS server")              => "CUPS",
-    _("Printer on remote lpd server")               => "LPD",
-    _("Network printer (TCP/Socket)")               => "SOCKET",
-    _("Printer on SMB/Windows 95/98/NT server")     => "SMB",
-    _("Printer on NetWare server")                  => "NCP",
-    _("Enter a printer device URI")                 => "URI",
-    _("Pipe job into a command")                    => "POSTPIPE"
-);
-%printer_type_inv = reverse %printer_type;
-
-#------------------------------------------------------------------------------
-
-sub set_prefix($) { $prefix = $_[0]; }
-
-sub default_printer_type($) { "LOCAL" }
-
-sub spooler {
-    # LPD is taken from the menu for the moment because the classic LPD is
-    # highly unsecure. Depending on how the GNU lpr development is going on
-    # LPD support can be reactivated by uncommenting the line which is
-    # commented out now.
-
-    #return @spooler_inv{qw(cups lpd lprng pdq)};
-    return @spooler_inv{qw(cups lprng pdq)};
-}
-
-sub printer_type($) {
-    my ($printer) = @_;
-    for ($printer->{SPOOLER}) {
-	/cups/ && return @printer_type_inv{qw(LOCAL), 
-					   qw(LPD SOCKET SMB), 
-					   $::expert ? qw(URI) : ()};
-	/lpd/  && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
-					   $::expert ? qw(POSTPIPE URI) : ()};
-	/lprng/  && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
-					   $::expert ? qw(POSTPIPE URI) : ()};
-	/pdq/  && return @printer_type_inv{qw(LOCAL LPD SOCKET),
-					   $::expert ? qw(URI) : ()};
-    }
-}
-
-sub get_default_spooler () {
-    if (-f "$prefix$FOOMATIC_DEFAULT_SPOOLER") {
-	open DEFSPOOL, "< $prefix$FOOMATIC_DEFAULT_SPOOLER";
-	my $spool = <DEFSPOOL>;
-	chomp $spool;
-	close DEFSPOOL;
-	return $spool if ($spool =~ /cups|lpd|lprng|pdq/); 
-    }
-}
-
-sub set_default_spooler ($) {
-    my ($printer) = @_;
-    # Make Foomatic config directory if it does not exist yet
-    mkdir "$prefix$FOOMATICCONFDIR" if (!(-d "$prefix$FOOMATICCONFDIR"));
-    # Mark the default driver in a file
-    open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" || 
-	die "Cannot create $prefix$FOOMATIC_DEFAULT_SPOOLER!";
-    print DEFSPOOL $printer->{SPOOLER};
-    close DEFSPOOL;
-}
-
-sub set_permissions {
-    my ($file, $perms, $owner, $group) = @_;
-    # We only need to set the permissions during installation to be able to
-    # print test pages. After installation the devfsd daemon does the business
-    # automatically.
-    if (!$::isInstall) {return 1;}
-    if ($owner && $group) {
-        run_program::rooted($prefix, "/bin/chown", "$owner.$group", $file)
-	    || die "Could not start chown!";
-    } elsif ($owner) {
-        run_program::rooted($prefix, "/bin/chown", $owner, $file)
-	    || die "Could not start chown!";
-    } elsif ($group) {
-        run_program::rooted($prefix, "/bin/chgrp", $group, $file)
-	    || die "Could not start chgrp!";
-    }
-    run_program::rooted($prefix, "/bin/chmod", $perms, $file)
-	|| die "Could not start chmod!";
-}
-
-sub restart_service ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "restart");
-    if (($? >> 8) != 0) {
-	return 0;
-    } else {
-	# CUPS needs some time to come up.
-	wait_for_cups() if ($service eq "cups");
-	return 1;
-    }
-}
-
-sub start_service ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "start");
-    if (($? >> 8) != 0) {
-	return 0;
-    } else {
-	# CUPS needs some time to come up.
-	wait_for_cups() if ($service eq "cups");
-	return 1;
-    }
-}
-
-sub stop_service ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
-    run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "stop");
-    if (($? >> 8) != 0) {return 0;} else {return 1;}
-}
-
-sub service_starts_on_boot ($) {
-    my ($service) = @_;
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" ||
-	    return 0;
-    while (my $line = <F>) {
-	chomp $line;
-	if ($line =~ /:on/) {
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return 0;
-}
-
-sub start_service_on_boot ($) {
-    my ($service) = @_;
-    run_program::rooted($prefix, "/sbin/chkconfig", "--add", $service)
-	|| return 0;
-    return 1;
-}
-
-sub SIGHUP_daemon {
-    my ($service) = @_;
-    if ($service eq "cupsd") {$service = "cups"};
-    # PDQ has no daemon, exit.
-    if ($service eq "pdq") {return 1};
-    # CUPS needs auto-configuration
-    run_program::rooted($prefix, "/usr/sbin/setcupsconfig") if ($service eq "cups");
-    # Name of the daemon
-    my %daemons = (
-			    "lpr" => "lpd",
-			    "lpd" => "lpr",
-			    "lprng" => "lpd",
-			    "cups" => "cupsd",
-			    "devfs" => "devfsd",
-			    );
-    my $daemon = $deamons{$service};
-    $daemon = $service if (! defined $daemon);
-    if ($service eq "cups") {
-	# The current CUPS (1.1.13) dies on SIGHUP, to the normal restart.
-	restart_service($service);
-	# CUPS needs some time to come up.
-	wait_for_cups();
-    } else {
-	# Send the SIGHUP
-	run_program::rooted($prefix, "/usr/bin/killall", "-HUP", $daemon);
-    }
-    return 1;
-}
-
-sub wait_for_cups {
-    # CUPS needs some time to come up. Wait up to 30 seconds, checking
-    # whether CUPS is ready.
-    my $cupsready = 0;
-    my $i;
-    for ($i = 0; $i < 30; $i++) {
-	run_program::rooted($prefix, "/usr/bin/lpstat", "-r");
-	if (($? >> 8) != 0) {
-	    # CUPS is not ready, continue
-	    sleep 1;
-	} else {
-	    # CUPS is ready, quit
-	    $cupsready = 1;
-	    last;
-	}
-    }
-    return $cupsready;
-}
-
-sub assure_device_is_available_for_cups {
-    # Checks whether CUPS already "knows" a certain port, it does not
-    # know it usually when the appropriate kernel module is loaded
-    # after CUPS was started or when the printer is turned on after
-    # CUPS was started. CUPS 1.1.12 and newer refuses to set up queues
-    # on devices which it does not know, it points these queues to
-    # file:/dev/null instead. Restart CUPS if necessary to assure that
-    # CUPS knows the device.
-    my ($device) = @_;
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" ||
-	    die "Could not run \"lpinfo\"!";
-    while (my $line = <F>) {
-	if ($line =~ /$device/) { # Found a line containing the device name,
-	                          # so CUPS knows it.
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return SIGHUP_daemon("cups");
-}
-
-sub network_running {
-    # If the network is not running return 0, otherwise 1.
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" ||
-	    die "Could not run \"ifconfig\"!";
-    while (my $line = <F>) {
-	if (($line !~ /^lo\s+/) && # The loopback device can have been 
-                                   # started by the spooler's startup script
-	    ($line =~ /^(\S+)\s+/)) { # In this line starts an entry for a
-	                              # running network
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return 0;
-}
-
-sub get_security_level {
-    # Get security level by reading /etc/profile (only after install).
-    # This is a preliminary solution until msec puts the security level
-    # definition into the correct file.
-    $file = "/etc/profile";
-    if (-f $file) {
-	local *F; 
-	open F, "< $file" || return 0;
-	while (my $line = <F>) {
-	    if ($line =~ /^\s*SECURE_LEVEL=([0-5])\s*$/) {
-		close F;
-		return $1;
-	    }
-	}
-	close F;
-    }
-    return 0;
-}
-    
-
-sub spooler_in_security_level {
-    # Was the current spooler already added to the current security level?
-    my ($spooler, $level) = @_;
-    my $sp;
-    $sp = (($spooler eq "lpr") || ($spooler eq "lprng")) ? "lpd" : $spooler;
-    $file = "$prefix/etc/security/msec/server.$level";
-    if (-f $file) {
-	local *F; 
-	open F, "< $file" || return 0;
-	while (my $line = <F>) {
-	    if ($line =~ /^\s*$sp\s*$/) {
-		close F;
-		return 1;
-	    }
-	}
-	close F;
-    }
-    return 0;
-}
-
-sub add_spooler_to_security_level {
-    my ($spooler, $level) = @_;
-    my $sp;
-    $sp = (($spooler eq "lpr") || ($spooler eq "lprng")) ? "lpd" : $spooler;
-    $file = "$prefix/etc/security/msec/server.$level";
-    if (-f $file) {
-	local *F; 
-	open F, ">> $file" || return 0;
-	print F "$sp\n";
-	close F;
-    }
-    return 1;
-}
-
-sub files_exist {
-    my @files = @_;
-    for my $file (@files) {
-	   return 0 if (! -f "$prefix$file"),
-    }
-    return 1;
-}
-
-sub set_alternative {
-    my ($command, $executable) = @_;
-    local *F;
-    # Read the list of executables for the given command to find the number
-    # of the desired executable
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" ||
-	    die "Could not run \"update-alternatives\"!";
-    my $choice = 0;
-    while (my $line = <F>) {
-	chomp $line;
-	if ($line =~ m/^[\* ][\+ ]\s*([0-9]+)\s+(\S+)\s*$/) { # list entry?
-	    if ($2 eq $executable) {
-		$choice = $1;
-		last;
-	    }
-	}
-    }
-    close F;
-    # If the executable was found, assign the command to it
-    if ($choice > 0) {
-	system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "/bin/sh -c \"/bin/echo $choice | update-alternatives --config $command > /dev/null 2>&1\"");
-    }
-    return 1;
-}    
-
-sub pdq_panic_button {
-    my $setting = $_[0];
-    if (-f "/usr/sbin/pdqpanicbutton") {
-        run_program::rooted($prefix, "/usr/sbin/pdqpanicbutton", "--$setting")
-	    || die "Could not $setting PDQ panic buttons!";
-    }
-}
-
-sub copy_printer_params($$) {
-    my ($from, $to) = @_;
-    map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from; 
-    #- avoid cycles-----------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-}
-
-sub getinfo($) {
-    my ($prefix) = @_;
-    my $printer = {};
-    my @QUEUES;
-
-    set_prefix($prefix);
-
-    # Initialize $printer data structure
-    resetinfo($printer);
-
-    return $printer;
-}
-
-#------------------------------------------------------------------------------
-sub resetinfo($) {
-    my ($printer) = @_;
-    $printer->{QUEUE} = "";
-    $printer->{OLD_QUEUE} = "";
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = "";
-    $printer->{DBENTRY} = "";
-    $printer->{DEFAULT} = "";
-    $printer->{currentqueue} = {};
-    # -check which printing system was used previously and load the information
-    # -about its queues
-    read_configured_queues($printer);
-}
-
-sub read_configured_queues($) {
-    my ($printer) = @_;
-    my @QUEUES;
-    # Get the default spooler choice from the config file
-    $printer->{SPOOLER} ||= get_default_spooler();
-    if (!$printer->{SPOOLER}) {
-	#- Find the first spooler where there are queues
-	my $spooler;
-	for $spooler (qw(cups pdq lprng lpd)) {
-	    #- poll queue info 
-	    local *F; 
-	    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-		"foomatic-configure -P -q -s $spooler |" ||
-		    die "Could not run foomatic-configure";
-	    eval (join('',(<F>))); 
-	    close F;
-	    #- Have we found queues?
-	    if ($#QUEUES != -1) {
-		$printer->{SPOOLER} = $spooler;
-		last;
-	    }
-	}
-    } else {
-	#- Poll the queues of the current default spooler
-	local *F; 
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -P -q -s $printer->{SPOOLER} |" ||
-		die "Could not run foomatic-configure";
-	eval (join('',(<F>))); 
-	close F;
-    }
-    $printer->{configured} = {};
-    my $i;
-    my $N = $#QUEUES + 1;
-    for ($i = 0;  $i < $N; $i++) {
-	$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}} = 
-	    $QUEUES[$i];
-	if ((!$QUEUES[$i]->{'make'}) || (!$QUEUES[$i]->{'model'})) {
-	    if ($printer->{SPOOLER} eq "cups") {
-		$printer->{OLD_QUEUE} = $QUEUES[$i]->{'queuedata'}{'queue'};
-		my $descr = get_descr_from_ppd($printer);
-		$descr =~ m/^([^\|]*)\|([^\|]*)\|.*$/;
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= $1;
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= $2;
-		# Read out which PPD file was originally used to set up this
-		# queue
-		local *F;
-		if (open F, "< $prefix/etc/cups/ppd/$QUEUES[$i]->{'queuedata'}{'queue'}.ppd") {
-		    while (my $line = <F>) {
-			if ($line =~ /^\*%MDKMODELCHOICE:(.+)$/) {
-			    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = $1;
-			}
-		    }
-		    close F;
-		}
-		# Mark that we have a CUPS queue but do not know the name
-		# the PPD file in /usr/share/cups/model
-		if (!$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'}) {
-		    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = '1';
-		}
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'driver'} = 'CUPS/PPD';
-		$printer->{OLD_QUEUE} = "";
-		# Read out the printer's options
-		$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'} = read_cups_options($QUEUES[$i]->{'queuedata'}{'queue'});
-	    }
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= "";
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= _("Unknown model");
-	} else {
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} = $QUEUES[$i]->{'make'};
-	    $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} = $QUEUES[$i]->{'model'};
-	}
-	# Fill in "options" field
-	if (my $args = $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'}) {
-	    my $arg;
-	    my @options;
-	    for $arg (@{$args}) {
-		push(@options, "-o");
-		my $optstr = $arg->{'name'} . "=" . $arg->{'default'};
-		push(@options, $optstr);
-	    }
-	    @{$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{options}} = @options;
-	}
-	# Construct an entry line for tree view in main window of
-	# printerdrake
-	make_menuentry($printer, $QUEUES[$i]->{'queuedata'}{'queue'});
-    }
-}
-
-sub make_menuentry {
-    my ($printer, $queue) = @_;
-    my $spooler = $shortspooler_inv{$printer->{SPOOLER}};
-    my $connect = $printer->{configured}{$queue}{'queuedata'}{'connect'};
-    my $localremote;
-    if (($connect =~ m!^file:!) || ($connect =~ m!^ptal:/mlc:!)) {
-	$localremote = _("Local Printers");
-    } else {
-	$localremote = _("Remote Printers");
-    }
-    my $make = $printer->{configured}{$queue}{'queuedata'}{'make'};
-    my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
-    my $connection;
-    if ($connect =~ m!^file:/dev/lp(\d+)$!) {
-	my $number = $1;
-	$connection = _(" on parallel port \#%s", $number);
-    } elsif ($connect =~ m!^file:/dev/usb/lp(\d+)$!) {
-	my $number = $1;
-	$connection = _(", USB printer \#%s", $number);
-    } elsif ($connect =~ m!^ptal:/(.+)$!) {
-	my $ptaldevice = $1;
-	if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
-	    my $number = $1;
-	    $connection = _(", multi-function device on parallel port \#%s",
-			    $number);
-	} elsif ($ptaldevice =~ /^mlc:usb:/) {
-	    $connection = _(", multi-function device on USB");
-	} elsif ($ptaldevice =~ /^hpjd:/) {
-	    $connection = _(", multi-function device on HP JetDirect");
-	} else {
-	    $connection = _(", multi-function device");
-	}
-    } elsif ($connect =~ m!^file:(.+)$!) {
-	$connection = _(", printing to %s", $1);
-    } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) {
-	$connection = _("on LPD server \"%s\", printer \"%s\"", $2, $1);
-    } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) {
-	$connection = _(", TCP/IP host \"%s\", port %s", $1, $2);
-    } elsif (($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$!) ||
-	     ($connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$!) ||
-	     ($connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!)) {
-	$connection = _("on Windows server \"%s\", share \"%s\"", $1, $2);
-    } elsif (($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$!) ||
-	     ($connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$!) ||
-	     ($connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!)) {
-	$connection = _("on Novell server \"%s\", printer \"%s\"", $1, $2);
-    } elsif ($connect =~ m!^postpipe:(.+)$!) {
-	$connection = _(", using command %s", $1);
-    } else {
-	$connection = ($::expert ? ", URI: $connect" : "");
-    }
-    my $sep = "!";
-    $printer->{configured}{$queue}{'queuedata'}{'menuentry'} = 
-	($::expert ? "$spooler$sep" : "") .
-	"$localremote$sep$queue: $make $model$connection";
-}
-
-sub read_printer_db(;$) {
-
-    my $spooler = $_[0];
-
-    my $dbpath = $prefix . $PRINTER_DB_FILE;
-
-    local $_; #- use of while (<...
-
-    local *DBPATH; #- don't have to do close ... and don't modify globals at least
-    # Generate the Foomatic printer/driver overview, read it from the
-    # appropriate file when it is already generated
-    if (!(-f $dbpath)) {
-	open DBPATH, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -O -q |" ||
-		die "Could not run foomatic-configure";
-    } else {
-	open DBPATH, $dbpath or die "An error occurred on $dbpath : $!";
-    }
-
-    my $entry = {};
-    my $inentry = 0;
-    my $indrivers = 0;
-    my $inautodetect = 0;
-    while (<DBPATH>) {
-	chomp;
-	if ($inentry) {
-	    # We are inside a printer entry
-	    if ($indrivers) {
-		# We are inside the drivers block of a printers entry
-		if (m!^\s*</drivers>\s*$!) {
-		    # End of drivers block
-		    $indrivers = 0;
-		} elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
-		    push (@{$entry->{drivers}}, $1);
-		}
-	    } elsif ($inautodetect) {
-		# We are inside the autodetect block of a printers entry
-		# All entries inside this block will be ignored
-		if (m!^.*</autodetect>\s*$!) {
-		    # End of autodetect block
-		    $inautodetect = 0;
-		}
-	    } else {
-		if (m!^\s*</printer>\s*$!) {
-		    # entry completed
-		    $inentry = 0;
-		    # Expert mode:
-		    # Make one database entry per driver with the entry name
-		    # manufacturer|model|driver
-		    if ($::expert) {
-			my $driver;
-			for $driver (@{$entry->{drivers}}) {
-			    my $driverstr;
-			    if ($driver eq "Postscript") {
-				$driverstr = "PostScript";
-			    } else {
-				$driverstr = "GhostScript + $driver";
-			    }
-			    if ($driver eq $entry->{defaultdriver}) {
-				$driverstr .= " (recommended)";
-			    }
-			    $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr";
-			    $entry->{driver} = $driver;
-			    # Duplicate contents of $entry because it is multiply entered to the database
-			    map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-			}
-		    } else {
-			# Recommended mode
-			# Make one entry per printer, with the recommended
-			# driver (manufacturerer|model)
-			$entry->{ENTRY} = "$entry->{make}|$entry->{model}";
-			if ($entry->{defaultdriver}) {
-			    $entry->{driver} = $entry->{defaultdriver};
-			    map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-			}
-		    }
-		    $entry = {};
-		} elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) {
-		    # Foomatic printer ID
-		    $entry->{printer} = $1;
-		} elsif (m!^\s*<make>(.+)</make>\s*$!) {
-		    # Printer manufacturer
-		    $entry->{make} = uc($1);
-		} elsif (m!^\s*<model>(.+)</model>\s*$!) {
-		    # Printer model
-		    $entry->{model} = $1;
-		} elsif (m!<driver>(.+)</driver>!) {
-		    # Printer default driver
-		    $entry->{defaultdriver} = $1;
-		} elsif (m!^\s*<drivers>\s*$!) {
-		    # Drivers block
-		    $indrivers = 1;
-		    @{$entry->{drivers}} = (); 
-		} elsif (m!^\s*<autodetect>\s*$!) {
-		    # Autodetect block
-		    $inautodetect = 1;
-		}
-	    }
-	} else {
-	    if (m!^\s*<printer>\s*$!) {
-		# new entry
-		$inentry = 1;
-	    }
-	}
-    }
-    close DBPATH;
-
-    # Add raw queue
-    if ($spooler ne "pdq") {
-	$entry->{ENTRY} = _("Raw printer (No driver)");
-	$entry->{driver} = "raw";
-	$entry->{make} = "";
-	$entry->{model} = _("Unknown model");
-	map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
-    }
-
-    #- Load CUPS driver database if CUPS is used as spooler
-    if (($spooler) && ($spooler eq "cups") && ($::expert)) {
-
-	#&$install('cups-drivers') unless $::testing;
-	#my $w;
-	#if ($in) {
-	#    $w = $in->wait_message(_("CUPS starting"),
-	#			   _("Reading CUPS drivers database..."));
-	#}
-        poll_ppd_base();
-    }
-
-    @entries_db_short     = sort keys %printer::thedb;
-    #%descr_to_db          = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short;
-    #%descr_to_help        = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short;
-    #@entry_db_description = keys %descr_to_db;
-    #db_to_descr          = reverse %descr_to_db;
-
-}
-
-sub read_foomatic_options ($) {
-    my ($printer) = @_;
-    # Generate the option data for the chosen printer/driver combo
-    my $COMBODATA;
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"foomatic-configure -P -q -p $printer->{currentqueue}{'printer'}" .
-	    " -d $printer->{currentqueue}{'driver'}" . 
-		($printer->{OLD_QUEUE} ?
-		  " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
-		($printer->{SPECIAL_OPTIONS} ?
-		  " $printer->{SPECIAL_OPTIONS}" : "") 
-		    . " |" ||
-	    die "Could not run foomatic-configure";
-    eval (join('',(<F>))); 
-    close F;
-    # Return the arguments field
-    return $COMBODATA->{'args'};
-}
-
-sub read_cups_options ($) {
-    my ($queue_or_file) = @_;
-    # Generate the option data from a CUPS PPD file/a CUPS queue
-    # Use the same Perl data structure as Foomatic uses to be able to
-    # reuse the dialog
-    local *F;
-    if ($queue_or_file =~ /.ppd.gz$/) { # compressed PPD file
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "gunzip -cd $queue_or_file | lphelp - |" || return 0;
-    } else { # PPD file not compressed or queue
-	open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "lphelp $queue_or_file |" || return 0;
-    }
-    my $i;
-    my $j;
-    my @args = ();
-    my $line;
-    my $inoption = 0;
-    my $inchoices = 0;
-#    my $innumerical = 0;
-    while ($line = <F>) {
-	chomp $line;
-	if ($inoption) {
-	    if ($inchoices) {
-		if ($line =~ /^\s*(\S+)\s+(\S.*)$/) {
-		    push(@{$args[$i]{vals}}, {});
-		    $j = $#{$args[$i]{vals}};
-		    $args[$i]{vals}[$j]{value} = $1;
-		    my $comment = $2;
-		    # Did we find the default setting?
-		    if ($comment =~ /default\)\s*$/) {
-			$args[$i]{default} = $args[$i]{vals}[$j]{value};
-			$comment =~ s/,\s*default\)\s*$//;
-		    } else {
-			$comment =~ s/\)\s*$//;
-		    }
-		    # Remove opening paranthese
-		    $comment =~ s/^\(//;
-		    # Remove page size info
-		    $comment =~ s/,\s*size:\s*[0-9\.]+x[0-9\.]+in$//;
-		    $args[$i]{vals}[$j]{comment} = $comment;
-		} elsif (($line =~ /^\s*$/) && ($#{$args[$i]{vals}} > -1)) {
-		    $inchoices = 0;
-		    $inoption = 0;
-		}
-#	    } elsif ($innumerical == 1) {
-#		if ($line =~ /^\s*The default value is ([0-9\.]+)\s*$/) {
-#		    $args[$i]{default} = $1;
-#		    $innumerical = 0;
-#		    $inoption = 0;
-#		}
-	    } else {
-		if ($line =~ /^\s*<choice>/) {
-		    $inchoices = 1;
-#		} elsif ($line =~ /^\s*<value> must be a(.*) number in the range ([0-9\.]+)\.\.([0-9\.]+)\s*$/) {
-#		    delete($args[$i]{vals});
-#		    $args[$i]{min} = $2;
-#		    $args[$i]{max} = $3;
-#		    my $type = $1;
-#		    if ($type =~ /integer/) {
-#			$args[$i]{type} = 'int';
-#		    } else {
-#			$args[$i]{type} = 'float';
-#		    }
-#		    $innumerical = 1;
-		}
-	    }
-	} else {
-	    if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<choice>\s*$/) {
-#	    if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<.*>\s*$/) {
-		$inoption = 1;
-		push(@args, {});
-		$i = $#args;
-		$args[$i]{comment} = $1;
-		$args[$i]{name} = $2;
-		$args[$i]{type} = 'enum';
-		@{$args[$i]{vals}} = ();
-	    }
-	}
-    }
-    close F;
-    # Return the arguments field
-    return \@args;
-}
-
-#------------------------------------------------------------------------------
-
-sub read_cups_printer_list {
-    my ($printer) = $_[0];
-    # This function reads in a list of all printers which the local CUPS
-    # daemon currently knows, including remote ones.
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"lpstat -v |" || return ();
-    my @printerlist = ();
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
-	    my $queuename = $1;
-	    my $comment = "";
-	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
-		(!$printer->{configured}{$queuename})) {
-		$comment = _("(on %s)", $1);
-	    } else {
-		$comment = _("(on this machine)");
-	    }
-	    push (@printerlist, "$queuename $comment");
-	}
-    }
-    close F;
-    return @printerlist;
-}
-
-sub get_cups_remote_queues {
-    my ($printer) = $_[0];
-    # This function reads in a list of all remote printers which the local 
-    # CUPS daemon knows due to broadcasting of remote servers or 
-    # "BrowsePoll" entries in the local /etc/cups/cupsd.conf/
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"lpstat -v |" || return ();
-    my @printerlist = ();
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
-	    my $queuename = $1;
-	    my $comment = "";
-	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
-		(!$printer->{configured}{$queuename})) {
-		$comment = _("On CUPS server \"%s\"", $1);
-		my $sep = "!";
-		push (@printerlist,
-		      ($::expert ? _("CUPS") . $sep : "") .
-		      _("Remote Printers") . "$sep$queuename: $comment"
-		      . ($queuename eq $printer->{DEFAULT} ?
-			 _(" (Default)") : ("")));
-	    }
-	}
-    }
-    close F;
-    return @printerlist;
-}
-
-sub set_cups_autoconf {
-    my $autoconf = $_[0];
-
-    # Read config file
-    local *F;
-    my $file = "$prefix/etc/sysconfig/printing";
-    if (!(-f $file)) {
-	@file_content = ();
-    } else {
-	open F, "< $file" or die "Cannot open $file!";
-	@file_content = <F>;
-	close F;
-    }
-
-    # Remove all valid "CUPS_CONFIG" lines
-    ($_ =~ /^\s*CUPS_CONFIG/ and $_="") foreach @file_content;
- 
-    # Insert the new "Printcap" line
-    if ($autoconf) {
-	push @file_content, "CUPS_CONFIG=automatic\n";
-    } else {
-	push @file_content, "CUPS_CONFIG=manual\n";
-    }
-
-    # Write back modified file
-    open F, "> $file" or die "Cannot open $file!";
-    print F @file_content;
-    close F;
-
-    # Restart CUPS
-    restart_service("cups");
-
-    return 1;
-}
-
-sub get_cups_autoconf {
-    local *F;
-    open F, ("< $prefix/etc/sysconfig/printing") || return 1;
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m!^[^\#]*CUPS_CONFIG=manual!) {
-	    return 0;
-	}
-    }
-    return 1;
-}
-
-sub set_default_printer {
-    my ($printer) = $_[0];
-    run_program::rooted($prefix, "foomatic-configure",
-			"-D", "-q", "-s", $printer->{SPOOLER},
-			"-n", $printer->{DEFAULT}) || return 0;
-    return 1;
-}
-
-sub get_default_printer {
-    my $printer = $_[0];
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"foomatic-configure -Q -q -s $printer->{SPOOLER} |" || return undef;
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) {
-	    return $1;
-	}
-    }
-    return undef;
-}
-
-sub read_cupsd_conf {
-    my @cupsd_conf;
-    local *F;
-
-    open F, "$prefix/etc/cups/cupsd.conf";
-    @cupsd_conf = <F>;
-    close F;
-
-    @cupsd_conf;
-}
-sub write_cupsd_conf {
-    my (@cupsd_conf) = @_;
-    local *F;
-
-    open F, ">$prefix/etc/cups/cupsd.conf";
-    print F @cupsd_conf;
-    close F;
-
-    #- restart cups after updating configuration.
-    restart_service("cups");
-}
-
-sub read_printers_conf {
-    my ($printer) = @_;
-    my $current = undef;
-
-    #- read /etc/cups/printers.conf file.
-    #- according to this code, we are now using the following keys for each queues.
-    #-    DeviceURI > lpd://printer6/lp
-    #-    Info      > Info Text
-    #-    Location  > Location Text
-    #-    State     > Idle|Stopped
-    #-    Accepting > Yes|No
-    local *PRINTERS; open PRINTERS, "$prefix/etc/cups/printers.conf" or return;
-    local $_;
-    while (<PRINTERS>) {
-	chomp;
-	/^\s*#/ and next;
-	if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
-	elsif (/\s*<\/Printer>/) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
-				   add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
-	elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
-    }
-    close PRINTERS;
-
-    #- assume this printing system.
-    $printer->{SPOOLER} ||= 'cups';
-}
-
-sub get_direct_uri {
-    #- get the local printer to access via a Device URI.
-    my @direct_uri;
-    local *F; open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/sbin/lpinfo -v |";
-    local $_;
-    while (<F>) {
-	/^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2;
-    }
-    close F;
-    @direct_uri;
-}
-
-sub get_descr_from_ppd {
-    my ($printer) = @_;
-    my %ppd;
-
-    #- if there is no ppd, this means this is a raw queue.
-    local *F; open F, "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd" or return "|" . _("Unknown model");
-    # "OTHERS|Generic PostScript printer|PostScript (en)";
-    local $_;
-    while (<F>) {
-	/^\*([^\s:]*)\s*:\s*\"([^\"]*)\"/ and do { $ppd{$1} = $2; next };
-	/^\*([^\s:]*)\s*:\s*([^\s\"]*)/   and do { $ppd{$1} = $2; next };
-    }
-    close F;
-
-    my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName});
-    # Apply the beautifying rules of poll_ppd_base
-    if ($descr =~ /Foomatic \+ Postscript/) {
-	$descr =~ s/Foomatic \+ Postscript/PostScript/;
-    } elsif ($descr =~ /Foomatic/) {
-	$descr =~ s/Foomatic/GhostScript/;
-    } elsif ($descr =~ /CUPS\+GIMP-print/) {
-	$descr =~ s/CUPS\+GIMP-print/CUPS \+ GIMP-Print/;
-    } elsif ($descr =~ /Series CUPS/) {
-	$descr =~ s/Series CUPS/Series, CUPS/;
-    } elsif (!(uc($descr) =~ /POSTSCRIPT/)) {
-	$descr .= ", PostScript";
-    }
-
-    # Split the $descr into model and driver
-    my $model;
-    my $driver;
-    if ($descr =~ /^([^,]+), (.*)$/) {
-	$model = $1;
-	$driver = $2;
-    } else {
-	# Some PPDs do not have the ", <driver>" part.
-	$model = $descr;
-	$driver = "PostScript";
-    }
-    my $make = $ppd{Manufacturer};
-    my $lang = $ppd{LanguageVersion};
-
-    # Remove manufacturer's name from the beginning of the model name
-    if (($make) && ($model =~ /^$make[\s\-]+([^\s\-].*)$/)) {
-	$model = $1;
-    }
-
-    # Put out the resulting description string
-    uc($make) . '|' . $model . '|' . $driver .
-      ($lang && (" (" . lc(substr($lang, 0, 2)) . ")"));
-}
-
-sub poll_ppd_base {
-    #- before trying to poll the ppd database available to cups, we have to make sure
-    #- the file /etc/cups/ppds.dat is no more modified.
-    #- if cups continue to modify it (because it reads the ppd files available), the
-    #- poll_ppd_base program simply cores :-)
-    run_program::rooted($prefix, "ifconfig lo 127.0.0.1"); #- else cups will not be happy! and ifup lo don't run ?
-    start_service("cups");
-    my $driversthere = scalar(keys %thedb);
-    foreach (1..60) {
-	local *PPDS; open PPDS, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/poll_ppd_base -a |";
-	local $_;
-	while (<PPDS>) {
-	    chomp;
-	    my ($ppd, $mf, $descr, $lang) = split /\|/;
-	    if ($ppd eq "raw") {next;}
-	    my ($model, $driver);
-	    if ($descr) {
-		if ($descr =~ /^([^,]+), (.*)$/) {
-		    $model = $1;
-		    $driver = $2;
-		} else {
-		    # Some PPDs do not have the ", <driver>" part.
-		    $model = $descr;
-		    $driver = "PostScript";
-		}
-	    }
-	    # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the models
-	    # do not appear twice
-	    if ($mf eq "CANON") {
-		$model =~ s/BJC\s+/BJC-/;
-	    }
-	    $ppd && $mf && $descr and do {
-		my $key = "$mf|$model|$driver" . ($lang && " ($lang)");
-	        $thedb{$key}{ppd} = $ppd;
-		$thedb{$key}{driver} = $driver;
-		$thedb{$key}{make} = $mf;
-		$thedb{$key}{model} = $model;
-	    }
-	}
-	close PPDS;
-	scalar(keys %thedb) - $driversthere > 5 and last;
-	#- we have to try again running the program, wait here a little before.
-	sleep 1; 
-    }
-
-    #scalar(keys %descr_to_ppd) > 5 or die "unable to connect to cups server";
-
-}
-
-
-
-#-******************************************************************************
-#- write functions
-#-******************************************************************************
-
-sub configure_queue($) {
-    my ($printer) = @_;
-    local *F;
-
-    if ($printer->{currentqueue}{foomatic}) {
-	#- Create the queue with "foomatic-configure", in case of queue
-	#- renaming copy the old queue
-        run_program::rooted($prefix, "foomatic-configure", "-q",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-n", $printer->{currentqueue}{'queue'},
-			    (($printer->{currentqueue}{'queue'} ne 
-			      $printer->{OLD_QUEUE}) &&
-			     ($printer->{configured}{$printer->{OLD_QUEUE}}) ?
-			     ("-C", $printer->{OLD_QUEUE}) : ()),
-			    "-c", $printer->{currentqueue}{'connect'},
-			    "-p", $printer->{currentqueue}{'printer'},
-			    "-d", $printer->{currentqueue}{'driver'},
-			    "-N", $printer->{currentqueue}{'desc'},
-			    "-L", $printer->{currentqueue}{'loc'},
-			    @{$printer->{currentqueue}{options}}
-			    ) or die "foomatic-configure failed";
-    } elsif ($printer->{currentqueue}{ppd}) {
-	#- If the chosen driver is a PPD file from /usr/share/cups/model,
-	#- we use lpadmin to set up the queue
-        run_program::rooted($prefix, "lpadmin",
-			    "-p", $printer->{currentqueue}{'queue'},
-#			    $printer->{State} eq 'Idle' && 
-#			        $printer->{Accepting} eq 'Yes' ? ("-E") : (),
-			    "-E",
-			    "-v", $printer->{currentqueue}{'connect'},
-			    ($printer->{currentqueue}{'ppd'} ne '1') ?
-			        ("-m", $printer->{currentqueue}{'ppd'}) : (),
-			    $printer->{currentqueue}{'desc'} ?
-			        ("-D", $printer->{currentqueue}{'desc'}) : (),
-			    $printer->{currentqueue}{'loc'} ? 
-			        ("-L", $printer->{currentqueue}{'loc'}) : (),
-			    @{$printer->{currentqueue}{options}}
-			    ) or die "lpadmin failed";
-	# Add a comment line containing the path of the used PPD file to the
-	# end of the PPD file
-	if ($printer->{currentqueue}{'ppd'} ne '1') {
-	    open F, ">> $prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd";
-	    print F "*%MDKMODELCHOICE:$printer->{currentqueue}{'ppd'}\n";
-	    close F;
-	}
-	# Copy the old queue's PPD file to the new queue when it is renamed,
-	# to conserve the option settings
-	if (($printer->{currentqueue}{'queue'} ne 
-	     $printer->{OLD_QUEUE}) &&
-	    ($printer->{configured}{$printer->{OLD_QUEUE}})) {
-	    system("echo yes | cp -f " .
-		   "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd " .
-		   "$prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd");
-	}
-    } else {
-	# Raw queue
-        run_program::rooted($prefix, "foomatic-configure", "-q",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-n", $printer->{currentqueue}{'queue'},
-			    "-c", $printer->{currentqueue}{'connect'},
-			    "-d", $printer->{currentqueue}{'driver'},
-			    "-N", $printer->{currentqueue}{'desc'},
-			    "-L", $printer->{currentqueue}{'loc'}
-			    ) or die "foomatic-configure failed";
-    }	  
-
-    # Make sure that queue is active
-    if ($printer->{SPOOLER} ne "pdq") {
-        run_program::rooted($prefix, "foomatic-printjob",
-			    "-s", $printer->{currentqueue}{'spooler'},
-			    "-C", "up", $printer->{currentqueue}{'queue'});
-    }
-
-    # Check whether a USB printer is configured and activate USB printing if so
-    my $useUSB = 0;
-    foreach (values %{$printer->{configured}}) {
-	$useUSB ||= $_->{'queuedata'}{'connect'} =~ /usb/ || 
-	    $_->{DeviceURI} =~ /usb/;
-    }
-    $useUSB ||= ($printer->{currentqueue}{'queue'}{'queuedata'}{'connect'}
-		 =~ /usb/);
-    if ($useUSB) {
-	my $f = "$prefix/etc/sysconfig/usb";
-	my %usb = getVarsFromSh($f);
-	$usb{PRINTER} = "yes";
-	setVarsInSh($f, \%usb);
-    }
-
-    # Open permissions for device file when PDQ is chosen as spooler
-    # so normal users can print.
-    if ($printer->{SPOOLER} eq 'pdq') {
-	if ($printer->{currentqueue}{'connect'} =~ m!^\s*file:(\S*)\s*$!) {
-	    set_permissions($1,"666");
-	}
-    }
-
-    # Make a new printer entry in the $printer structure
-    $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'} =
-        {};
-    copy_printer_params($printer->{currentqueue},
-      $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'});
-    # Construct an entry line for tree view in main window of
-    # printerdrake
-    make_menuentry($printer, $printer->{currentqueue}{'queue'});
-
-    # Store the default option settings
-    $printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = {};
-    if ($printer->{currentqueue}{foomatic}) {
-	my $tmp = $printer->{OLD_QUEUE};
-	$printer->{OLD_QUEUE} = $printer->{currentqueue}{'queue'};
-	$printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = 
-	    read_foomatic_options($printer);
-	$printer->{OLD_QUEUE} = $tmp;
-    } elsif ($printer->{currentqueue}{ppd}) {
-	$printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} =
-	    read_cups_options($printer->{currentqueue}{'queue'});
-    }
-    # Clean up
-    delete($printer->{ARGS});
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{currentqueue} = {};
-}
-
-sub remove_queue($$) {
-    my ($printer) = $_[0];
-    my ($queue) = $_[1];
-    run_program::rooted($prefix, "foomatic-configure", "-R", "-q",
-			"-s", $printer->{SPOOLER},
-			"-n", $queue);
-    # Delete old stuff from data structure
-    delete $printer->{configured}{$queue};
-    delete($printer->{currentqueue});
-    delete($printer->{ARGS});
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{currentqueue} = {};
-    removeprinterfromapplications($printer, $queue);
-}
-
-sub restart_queue($) {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-
-    # Restart the daemon(s)
-    for ($printer->{SPOOLER}) {
-	/cups/ && do {
-	    #- restart cups.
-	    restart_service("cups");
-	    last };
-	/lpr|lprng/ && do {
-	    #- restart lpd.
-	    foreach (("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock")) {
-		my $pidlpd = (cat_("$prefix$_"))[0];
-		kill 'TERM', $pidlpd if $pidlpd;
-		unlink "$prefix$_";
-	    }
-	    restart_service("lpd"); sleep 1;
-	    last };
-    }
-    # Kill the jobs
-    run_program::rooted($prefix, "foomatic-printjob", "-R",
-			"-s", $printer->{SPOOLER},
-			"-P", $queue, "-");
-
-}
-
-sub print_pages($@) {
-    my ($printer, @pages) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lpr = "/usr/bin/foomatic-printjob";
-    my $lpq = "$lpr -Q";
-
-    # Print the pages
-    foreach (@pages) {
-	my $page = $_;
-	# Only text and PostScript can be printed directly with all spoolers,
-	# images must be treated seperately
-	if ($page =~ /\.jpg$/) {
-	    system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-		   "/usr/bin/convert $page -page 427x654+100+65 PS:- | " .
-		   ($::testing ? "$prefix" : "chroot $prefix/ ") .
-		   "$lpr -s $printer->{SPOOLER} -P $queue");
-	} else {
-	    run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
-				"-P", $queue, $page);
-	}
-    }
-    sleep 5; #- allow lpr to send pages.
-    # Check whether the job is queued
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lpq -s $printer->{SPOOLER} -P $queue |";
-    my @lpq_output =
-	grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } <F>;
-    close F;
-    @lpq_output;
-}
-
-sub lphelp_output {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lphelp = "/usr/bin/lphelp";
-
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lphelp $queue |";
-    $helptext = join("", <F>);
-    close F;
-    if (!$helptext || ($helptext eq "")) {
-	$helptext = "Option list not available!\n";
-    }
-    return $helptext;
-}
-
-sub pdqhelp_output {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $pdq = "/usr/bin/pdq";
-
-    local *F; 
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$pdq -h -P $queue  2>&1 |";
-    $helptext = join("", <F>);
-    close F;
-    return $helptext;
-}
-
-sub print_optionlist {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lpr = "/usr/bin/foomatic-printjob";
-
-    # Print the option list pages
-    if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
-        run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
-			    "-P", $queue, "-o", "docs",
-			    "/etc/bashrc");
-    } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
-	system(($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "/usr/bin/lphelp $queue | " .
-	       ($::testing ? "$prefix" : "chroot $prefix/ ") .
-	       "$lpr -s $printer->{SPOOLER} -P $queue");
-    }
-}
-
-# ---------------------------------------------------------------
-#
-# Spooler config stuff
-#
-# ---------------------------------------------------------------
-
-sub get_copiable_queues {
-    my ($oldspooler, $newspooler) = @_;
-    local $_; #- use of while (<...
-
-    local *QUEUEOUTPUT; #- don't have to do close ... and don't modify globals
-                        #- at least
-    my @queuelist;      #- here we will list all Foomatic-generated queues
-    # Get queue list with foomatic-configure
-    open QUEUEOUTPUT, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	    "foomatic-configure -Q -q -s $oldspooler |" ||
-		die "Could not run foomatic-configure";
-
-    my $entry = {};
-    my $inentry = 0;
-    while (<QUEUEOUTPUT>) {
-	chomp;
-	if ($inentry) {
-	    # We are inside a queue entry
-	    if (m!^\s*</queue>\s*$!) {
-		# entry completed
-		$inentry = 0;
-		if (($entry->{foomatic}) && 
-		    ($entry->{spooler} eq $oldspooler)) {
-		    # Is the connection type supported by the new
-		    # spooler?
-		    if ((($newspooler eq "cups") &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^ptal:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/) ||
-			  ($entry->{connect} =~ /^smb:/) ||
-			  ($entry->{connect} =~ /^ipp:/))) ||
-			((($newspooler eq "lpd") ||
-			  ($newspooler eq "lprng")) &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^ptal:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/) ||
-			  ($entry->{connect} =~ /^smb:/) ||
-			  ($entry->{connect} =~ /^ncp:/) ||
-			  ($entry->{connect} =~ /^postpipe:/))) ||
-			(($newspooler eq "pdq") &&
-			 (($entry->{connect} =~ /^file:/) ||
-			  ($entry->{connect} =~ /^ptal:/) ||
-			  ($entry->{connect} =~ /^lpd:/) ||
-			  ($entry->{connect} =~ /^socket:/)))) {
-			push(@queuelist, $entry->{name});
-		    }
-		}
-		$entry = {};
-	    } elsif (m!^\s*<name>(.+)</name>\s*$!) {
-		    # queue name
-		    $entry->{name} = $1;
-	    } elsif (m!^\s*<connect>(.+)</connect>\s*$!) {
-		    # connection type (URI)
-		    $entry->{connect} = $1;
-	    }
-	} else {
-	    if (m!^\s*<queue\s+foomatic\s*=\s*\"?(\d+)\"?\s*spooler\s*=\s*\"?(\w+)\"?\s*>\s*$!) {
-		# new entry
-		$inentry = 1;
-		$entry->{foomatic} = $1;
-		$entry->{spooler} = $2;
-	    }
-	}
-    }
-    close QUEUEOUTPUT;
-    
-    return @queuelist;
-}
-
-sub copy_foomatic_queue {
-    my ($printer, $oldqueue, $oldspooler, $newqueue) = @_;
-    run_program::rooted($prefix, "foomatic-configure", "-q",
-			"-s", $printer->{SPOOLER},
-			"-n", $newqueue,
-			"-C", $oldspooler, $oldqueue);
-}
-
-# ------------------------------------------------------------------
-#
-# Configuration of HP multi-function devices
-#
-# ------------------------------------------------------------------
-
-sub configure_hpoj {
-    my ($device, @autodetected) = @_;
-    # Get the model ID as auto-detected
-    $device =~ m!^/dev/\S*lp(\d+)$!;
-    my $model = $1;
-    my $device_ok = 1;
-    foreach (@autodetected) {
-	$device eq $_->{port} or next;
-	$model = $_->{val}{MODEL};
-	# Check if the device is really an HP multi-function device
-	stop_service("hpoj");
-	my $bus;
-	my $address_arg = "";
-	if ($device =~ /usb/) {
-	    $bus = "usb";
-	} else {
-	    $bus = "par";
-	    $address_arg = parport_addr($device);
-	}
-	run_program::rooted($prefix, 
-			    "ptal-mlcd", "$bus:probe", "-device", 
-			    "$device", split(' ',$address_arg));
-	$device_ok = 0;
-	local *F; 
-	if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/ptal-devid mlc:$bus:probe |") {
-	    my $devid = join("", <F>);
-	    close F;
-	    if ($devid) {$device_ok = 1};
-	}
-	if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "ps auxwww | grep \"ptal-mlcd $bus:probe\" | grep -v grep | ") {
-	    my $line = <F>;
-	    if ($line =~ /^\s*\S+\s+(\d+)\s+/) {
-		my $pid = $1;
-		kill (15, $pid);
-	    }
-	    close F;
-	}
-	start_service("hpoj");
-	last;
-    }
-    # No, it is not an HP multi-function device.
-    return "" if (!$device_ok);
-    #$device = "/dev/usb/lp1"; $model = "DeskJet 990C";
-    # Read the HPOJ config file and check whether this device is already
-    # configured
-    my $deviceconfigured = 0;
-    my $ptaldevice;
-    my $hpoj_config = "/etc/ptal-start.conf";
-    local *HPOJCONFIG; 
-    if (open HPOJCONFIG, ("< $prefix$hpoj_config")) {
-	while ($line = <HPOJCONFIG>) {
-	    chomp $line;
-	    # Comment or blank line
-	    next if (($line =~ /^\s*\#/) || ($line =~ /^\s*$/));
-	    # Only lines beginning with "ptal-mlcd" are interesting.
-	    next if ($line !~ /^\s*ptal-mlcd\s+(\S+)\s+/);
-	    $ptaldevice = "mlc:$1";
-	    if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
-		# Parallel device
-		next if ($device =~ /usb/);
-		if ($line =~ m!-device\s+$device!) {
-		    # Our new device is parallel and already configured
-		    # by the current line
-		    $deviceconfigured = 1;
-		    last;
-		}
-	    } elsif ($ptaldevice =~ /^mlc:usb:(.+)$/) {
-		# USB device
-		next if ($device !~ /usb/);
-		if ($line =~ /-devidmatch\s+(\"[^\"]*\")/) {
-		    $configuredmodel = $1;
-		    $configuredmodel =~ s/\"//g;
-		    $configuredmodel =~ s/^mdl://;
-		    $configuredmodel =~ s/^model://;
-		    $configuredmodel =~ s/;$//;
-		    if ($configuredmodel eq $model) {
-			# Our new device is USB and already configured
-			# by the current line
-			$deviceconfigured = 1;
-			last;
-		    }
-		} elsif ($line =~ m!-device\s+(/dev/usb/lp\d+)!) {
-		    if ($1 eq $device) {
-			# Our new device is USB and already configured
-			# by the current line
-			$deviceconfigured = 1;
-			last;
-		    }
-		}
-	    }
-	}
-	close HPOJCONFIG;
-    }
-
-    # It's all done for us, the device is already configured
-    return $ptaldevice if $deviceconfigured;
-
-    # Configure the device
-    my $entry;
-    if ($device =~ /usb/) {
-	# USB device
-	my $ptaldevicemodel = $model;
-	$ptaldevicemodel =~ s/\s+/_/g;
-	if ($model =~ /^\d+$/) {
-	    $entry = "\nptal-mlcd usb:$ptaldevicemodel -device $device \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
-	} else {
-	    $entry = "\nptal-mlcd usb:$ptaldevicemodel -device /dev/usb/lp* -devidmatch \"$model;\" \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
-	}
-	$ptaldevice = "mlc:usb:$ptaldevicemodel";
-    } else {
-	# parallel device
-	# auto-detect the parallel port addresses
-	$device =~ m!^/dev/lp(\d+)$!;
-	my $portnumber = $1;
-	my $address_arg = parport_addr($device);
-	$entry = "\nptal-mlcd par:$portnumber -device $device$address_arg \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:par:$portnumber \$PTAL_PRINTD_CMDLINE_APPEND\n";
-	$ptaldevice = "mlc:par:$portnumber";
-    }
-
-    # Add new entry to HPOJ's config file
-    open(HPOJCONFIG,">> $prefix$hpoj_config") ||
-	die "Could not open $hpoj_config for writing!\n";
-    print HPOJCONFIG $entry;
-    close HPOJCONFIG;
-    # Restart HPOJ
-    restart_service("hpoj");
-    # Return HPOJ device name to form the URI
-    return $ptaldevice;
-}
-
-sub parport_addr{
-    # auto-detect the parallel port addresses
-    my ($device) = @_;
-    $device =~ m!^/dev/lp(\d+)$!;
-    my $portnumber = $1;
-    my $parport_addresses = 
-	`cat /proc/sys/dev/parport/parport$portnumber/base-addr`;
-    my $address_arg;
-    if ($parport_addresses =~ /^\s*(\d+)\s+(\d+)\s*$/) {
-	$address_arg = sprintf(" -base 0x%x -basehigh 0x%x", $1, $2);
-    } elsif ($parport_addresses =~ /^\s*(\d+)\s*$/) {
-	$address_arg = sprintf(" -base 0x%x", $1);
-    } else {
-	$address_arg = "";
-    }
-    return $address_arg;
-}
-
-sub config_sane {
-    my ($ptaldevice) = @_;
-
-    # Create config file for HP backend
-    output("$prefix/etc/sane.d/hp.conf",
-	   "$ptaldevice\noption connect-ptal\n");
-
-    # Add HP backend to /etc/sane.d/dll.conf if needed
-    return if member("hp", chomp_(cat_("$prefix/etc/sane.d/dll.conf")));
-    local *F;
-    open F, ">> $prefix/etc/sane.d/dll.conf" or 
-	die "can't write SANE config in /etc/sane.d/dll.conf: $!";
-    print F "hp\n";
-    close F;
-}
-
-# ------------------------------------------------------------------
-#
-# Configuration of printers in Applications
-#
-# ------------------------------------------------------------------
-
-sub configureapplications {
-    my ($printer) = @_;
-    configurestaroffice($printer);
-    configureopenoffice($printer);
-}
-
-sub addcupsremotetoapplications {
-    my ($printer, $queue) = @_;
-    return (addcupsremotetostaroffice($printer, $queue) &&
-	    addcupsremotetoopenoffice($printer, $queue));
-}
-
-sub removeprinterfromapplications {
-    my ($printer, $queue) = @_;
-    return (removeprinterfromstaroffice($printer, $queue) &&
-	    removeprinterfromopenoffice($printer, $queue));
-}
-
-sub removelocalprintersfromapplications {
-    my ($printer) = @_;
-    removelocalprintersfromstaroffice($printer);
-    removelocalprintersfromopenoffice($printer);
-}
-
-sub configurestaroffice {
-    my ($printer) = @_;
-    # Do we have Star Office installed?
-    my $configfilename = findsofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
-    my $configprefix = $1;
-    # Load Star Office printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Update remote CUPS queues
-    if (0 && ($printer->{SPOOLER} eq "cups") && 
-	(-x "$prefix/usr/bin/curl")) {
-	my @printerlist = getcupsremotequeues();
-	for my $listentry (@printerlist) {
-	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
-	    my $queue = $1;
-	    my $server = $2;
-	    eval(run_program::rooted
-		 ($prefix, "curl", "-o", "/etc/foomatic/$queue.ppd",
-		  "http://$server:631/printers/$queue.ppd"));
-	    if (-r "$prefix/etc/foomatic/$queue.ppd") {
-		$configfilecontent = 
-		    makestarofficeprinterentry($printer, $queue,
-					       $configprefix,
-					       $configfilecontent);
-	    }
-	}
-    }
-    # Update local printer queues
-    for my $queue (keys(%{$printer->{configured}})) {
-	# Check if we have a PPD file
-	if (! -r "$prefix/etc/foomatic/$queue.ppd") {
-	    if (-r "$prefix/etc/cups/ppd/$queue.ppd") {
-		# If we have a PPD file in the CUPS config dir, link to it
-		run_program::rooted($prefix, 
-				    "ln", "-sf",
-				    "/etc/cups/ppd/$queue.ppd",
-				    "/etc/foomatic/$queue.ppd");
-	    } elsif (-r "$prefix/usr/share/postscript/ppd/$queue.ppd") {
-		# Check PPD directory of GPR, too
-		run_program::rooted($prefix, 
-				    "ln", "-sf",
-				    "/usr/share/postscript/ppd/$queue.ppd",
-				    "/etc/foomatic/$queue.ppd");
-	    } else {
-		# No PPD file at all? We cannot set up this printer
-		next;
-	    }
-	}
-	$configfilecontent = 
-	    makestarofficeprinterentry($printer, $queue, $configprefix,
-				       $configfilecontent);
-    }
-    # Patch PostScript output to print Euro symbol correctly also for
-    # the "Generic Printer"
-    $configfilecontent = removeentry
-	("ports", "default_queue=", $configfilecontent);
-    $configfilecontent = addentry
-	("ports",
-	 "default_queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}}",
-	 $configfilecontent);
-    # Write back Star Office configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub configureopenoffice {
-    my ($printer) = @_;
-    # Do we have OpenOffice.org installed?
-    my $configfilename = findopenofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
-    my $configprefix = $1;
-    # Load OpenOffice.org printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Update remote CUPS queues
-    if (0 && ($printer->{SPOOLER} eq "cups") && 
-	(-x "$prefix/usr/bin/curl")) {
-	my @printerlist = getcupsremotequeues();
-	for my $listentry (@printerlist) {
-	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
-	    my $queue = $1;
-	    my $server = $2;
-	    eval(run_program::rooted
-		 ($prefix, "curl", "-o", "/etc/foomatic/$queue.ppd",
-		  "http://$server:631/printers/$queue.ppd"));
-	    if (-r "$prefix/etc/foomatic/$queue.ppd") {
-		$configfilecontent = 
-		    makeopenofficeprinterentry($printer, $queue,
-					       $configprefix,
-					       $configfilecontent);
-	    }
-	}
-    }
-    # Update local printer queues
-    for my $queue (keys(%{$printer->{configured}})) {
-	# Check if we have a PPD file
-	if (! -r "$prefix/etc/foomatic/$queue.ppd") {
-	    if (-r "$prefix/etc/cups/ppd/$queue.ppd") {
-		# If we have a PPD file in the CUPS config dir, link to it
-		run_program::rooted($prefix, 
-				    "ln", "-sf",
-				    "/etc/cups/ppd/$queue.ppd",
-				    "/etc/foomatic/$queue.ppd");
-	    } elsif (-r "$prefix/usr/share/postscript/ppd/$queue.ppd") {
-		# Check PPD directory of GPR, too
-		run_program::rooted($prefix, 
-				    "ln", "-sf",
-				    "/usr/share/postscript/ppd/$queue.ppd",
-				    "/etc/foomatic/$queue.ppd");
-	    } else {
-		# No PPD file at all? We cannot set up this printer
-		next;
-	    }
-	}
-	$configfilecontent = 
-	    makeopenofficeprinterentry($printer, $queue, $configprefix,
-				       $configfilecontent);
-    }
-    # Patch PostScript output to print Euro symbol correctly also for
-    # the "Generic Printer"
-    $configfilecontent = removeentry
-	("Generic Printer", "Command=", $configfilecontent);
-    $configfilecontent = addentry
-	("Generic Printer", 
-	 "Command=/usr/bin/perl -p -e \"s=/euro /unused=/Euro /unused=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}}",
-	 $configfilecontent);
-    # Write back OpenOffice.org configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub addcupsremotetostaroffice {
-    my ($printer, $queue) = @_;
-    # Do we have Star Office installed?
-    my $configfilename = findsofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
-    my $configprefix = $1;
-    # Load Star Office printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Update remote CUPS queues
-    if (($printer->{SPOOLER} eq "cups") && 
-	(-x "$prefix/usr/bin/curl")) {
-	my @printerlist = getcupsremotequeues();
-	for my $listentry (@printerlist) {
-	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
-	    my $q = $1;
-	    next if ($q ne $queue);
-	    my $server = $2;
-	    # Remove server name from queue name
-	    $q =~ s/^([^@]*)@.*$/$1/;
-	    eval(run_program::rooted
-		 ($prefix, "/usr/bin/curl", "-o",
-		  "/etc/foomatic/$queue.ppd",
-		  "http://$server:631/printers/$q.ppd"));
-	    # Does the file exist and is it not an error message?
-	    if ((-r "$prefix/etc/foomatic/$queue.ppd") &&
-		(cat_("$prefix/etc/foomatic/$queue.ppd") =~ 
-		 /^\*PPD-Adobe/)) {
-		$configfilecontent = 
-		    makestarofficeprinterentry($printer, $queue,
-					       $configprefix,
-					       $configfilecontent);
-	    } else {
-		return 0;
-	    }
-	    last;
-	}
-    }
-    # Write back Star Office configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub addcupsremotetoopenoffice {
-    my ($printer, $queue) = @_;
-    # Do we have OpenOffice.org installed?
-    my $configfilename = findopenofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
-    my $configprefix = $1;
-    # Load OpenOffice.org printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Update remote CUPS queues
-    if (($printer->{SPOOLER} eq "cups") && 
-	(-x "$prefix/usr/bin/curl")) {
-	my @printerlist = getcupsremotequeues();
-	for my $listentry (@printerlist) {
-	    next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
-	    my $q = $1;
-	    next if ($q ne $queue);
-	    my $server = $2;
-	    # Remove server name from queue name
-	    $q =~ s/^([^@]*)@.*$/$1/;
-	    eval(run_program::rooted
-		 ($prefix, "/usr/bin/curl", "-o",
-		  "/etc/foomatic/$queue.ppd",
-		  "http://$server:631/printers/$q.ppd"));
-	    # Does the file exist and is it not an error message?
-	    if ((-r "$prefix/etc/foomatic/$queue.ppd") &&
-		(cat_("$prefix/etc/foomatic/$queue.ppd") =~ 
-		 /^\*PPD-Adobe/)) {
-		$configfilecontent = 
-		    makeopenofficeprinterentry($printer, $queue,
-					       $configprefix,
-					       $configfilecontent);
-	    } else {
-		return 0;
-	    }
-	}
-    }
-    # Write back OpenOffice.org configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removeprinterfromstaroffice {
-    my ($printer, $queue) = @_;
-    # Do we have Star Office installed?
-    my $configfilename = findsofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
-    my $configprefix = $1;
-    # Load Star Office printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Remove the printer entry
-    $configfilecontent = 
-	removestarofficeprinterentry($printer, $queue, $configprefix,
-				     $configfilecontent);
-    # Write back Star Office configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removeprinterfromopenoffice {
-    my ($printer, $queue) = @_;
-    # Do we have OpenOffice.org installed?
-    my $configfilename = findopenofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
-    my $configprefix = $1;
-    # Load OpenOffice.org printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Remove the printer entry
-    $configfilecontent = 
-	removeopenofficeprinterentry($printer, $queue, $configprefix,
-				     $configfilecontent);
-    # Write back OpenOffice.org configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removelocalprintersfromstaroffice {
-    my ($printer) = @_;
-    # Do we have Star Office installed?
-    my $configfilename = findsofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
-    my $configprefix = $1;
-    # Load Star Office printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Remove the printer entries
-    for my $queue (keys(%{$printer->{configured}})) {
-	$configfilecontent = 
-	    removestarofficeprinterentry($printer, $queue, $configprefix,
-					 $configfilecontent);
-    }
-    # Write back Star Office configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removelocalprintersfromopenoffice {
-    my ($printer) = @_;
-    # Do we have OpenOffice.org installed?
-    my $configfilename = findopenofficeconfigfile();
-    return 1 if !$configfilename;
-    $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
-    my $configprefix = $1;
-    # Load OpenOffice.org printer config file
-    my $configfilecontent = readsofficeconfigfile($configfilename);
-    # Remove the printer entries
-    for my $queue (keys(%{$printer->{configured}})) {
-	$configfilecontent = 
-	    removeopenofficeprinterentry($printer, $queue, $configprefix,
-					 $configfilecontent);
-    }
-    # Write back OpenOffice.org configuration file
-    return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub makestarofficeprinterentry {
-    my ($printer, $queue, $configprefix, $configfile) = @_;
-    # Set default printer
-    if ($queue eq $printer->{DEFAULT}) {
-	$configfile = removeentry("windows", "device=", $configfile);
-	$configfile = addentry("windows", 
-			       "device=$queue,$queue PostScript,$queue",
-			       $configfile);
-    }
-    # Make an entry in the "[devices]" section
-    $configfile = removeentry("devices", "$queue=", $configfile);
-    $configfile = addentry("devices", 
-			   "$queue=$queue PostScript,$queue",
-			   $configfile);
-    # Make an entry in the "[ports]" section
-    # The "perl" command patches the PostScript output to print the Euro
-    # symbol correctly.
-    $configfile = removeentry("ports", "$queue=", $configfile);
-    $configfile = addentry("ports", 
-			   "$queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}} -P $queue",
-			   $configfile);
-    # Make printer's section
-    $configfile = addsection("$queue,PostScript,$queue", $configfile);
-    # Load PPD file
-    my $ppd = cat_("$prefix/etc/foomatic/$queue.ppd");
-    # Set the PostScript level
-    my $pslevel;
-    if ($ppd =~ /^\s*\*LanguageLevel:\s*\"?([^\s\"]+)\"?\s*$/m) {
-	$pslevel = $1;
-	$pslevel = "2" if $pslevel eq "3";
-    } else {
-	$pslevel = "2";
-    }
-    $configfile = removeentry("$queue.PostScript.$queue",
-			      "Level=", $configfile);
-    $configfile = addentry("$queue.PostScript.$queue", 
-			   "Level=$pslevel", $configfile);
-    # Set Color/BW
-    my $color;
-    if ($ppd =~ /^\s*\*ColorDevice:\s*\"?([Tt]rue)\"?\s*$/m) {
-	$color = "1";
-    } else {
-	$color = "0";
-    }
-    $configfile = removeentry("$queue.PostScript.$queue",
-			      "BitmapColor=", $configfile);
-    $configfile = addentry("$queue.PostScript.$queue", 
-			   "BitmapColor=$color", $configfile);
-    # Set the default paper size
-    if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
-	my $papersize=$1;
-	$configfile = removeentry("$queue.PostScript.$queue",
-				  "PageSize=", $configfile);
-	$configfile = removeentry("$queue.PostScript.$queue",
-				  "PPD_PageSize=", $configfile);
-	$configfile = addentry("$queue.PostScript.$queue", 
-			       "PageSize=$papersize", $configfile);
-	$configfile = addentry("$queue.PostScript.$queue", 
-			       "PPD_PageSize=$papersize", $configfile);
-    }
-    # Link the PPD file
-    run_program::rooted($prefix, 
-			"ln", "-sf", "/etc/foomatic/$queue.ppd", 
-			"$configprefix/share/xp3/ppds/$queue.PS");
-    return $configfile;
-}
-
-sub makeopenofficeprinterentry {
-    my ($printer, $queue, $configprefix, $configfile) = @_;
-    # Make printer's section
-    $configfile = addsection($queue, $configfile);
-    # Load PPD file
-    my $ppd = cat_("$prefix/etc/foomatic/$queue.ppd");
-    # "PPD_PageSize" line
-    if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
-	my $papersize=$1;
-	$configfile = removeentry($queue,
-				  "PPD_PageSize=", $configfile);
-	$configfile = addentry($queue, 
-			       "PPD_PageSize=$papersize", $configfile);
-    }
-    # "Command" line
-    # The "perl" command patches the PostScript output to print the Euro
-    # symbol correctly.
-    $configfile = removeentry($queue, "Command=", $configfile);
-    $configfile = addentry($queue, 
-			   "Command=/usr/bin/perl -p -e \"s=/euro /unused=/Euro /unused=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}} -P $queue",
-			   $configfile);
-    # "Comment" line 
-    $configfile = removeentry($queue, "Comment=", $configfile);
-    if (($printer->{configured}{$queue}) &&
-	($printer->{configured}{$queue}{queuedata}{desc})) {
-	$configfile = addentry
-	    ($queue, 
-	     "Comment=$printer->{configured}{$queue}{queuedata}{desc}",
-	     $configfile);
-    } else {
-	$configfile = addentry($queue, 
-			       "Comment=",
-			       $configfile);
-    }
-    # "Location" line 
-    $configfile = removeentry($queue, "Location=", $configfile);
-    if (($printer->{configured}{$queue}) &&
-	($printer->{configured}{$queue}{queuedata}{loc})) {
-	$configfile = addentry
-	    ($queue, 
-	     "Location=$printer->{configured}{$queue}{queuedata}{loc}",
-	     $configfile);
-    } else {
-	$configfile = addentry($queue, 
-			       "Location=",
-			       $configfile);
-    }
-    # "DefaultPrinter" line
-    $configfile = removeentry($queue, "DefaultPrinter=", $configfile);
-    my $default = "0";
-    if ($queue eq $printer->{DEFAULT}) {
-	$default = "1";
-    }
-    $configfile = addentry($queue, 
-			   "DefaultPrinter=$default",
-			   $configfile);
-    # "Printer" line 
-    $configfile = removeentry($queue, "Printer=", $configfile);
-    $configfile = addentry($queue, 
-			   "Printer=$queue/$queue",
-			   $configfile);
-    # Link the PPD file
-    run_program::rooted($prefix, 
-			"ln", "-sf", "/etc/foomatic/$queue.ppd", 
-			"$configprefix/share/psprint/driver/$queue.PS");
-    return $configfile;
-}
-
-sub removestarofficeprinterentry {
-    my ($printer, $queue, $configprefix, $configfile) = @_;
-    # Remove default printer entry
-    $configfile = removeentry("windows", "device=$queue,", $configfile);
-    # Remove entry in the "[devices]" section
-    $configfile = removeentry("devices", "$queue=", $configfile);
-    # Remove entry in the "[ports]" section
-    $configfile = removeentry("ports", "$queue=", $configfile);
-    # Remove "[$queue,PostScript,$queue]" section
-    $configfile = removesection("$queue,PostScript,$queue", $configfile);
-    # Remove Link of PPD file
-    run_program::rooted($prefix, 
-			"rm", "-f", 
-			"$configprefix/share/xp3/ppds/$queue.PS");
-    return $configfile;
-}
-
-sub removeopenofficeprinterentry {
-    my ($printer, $queue, $configprefix, $configfile) = @_;
-    # Remove printer's section
-    $configfile = removesection("$queue", $configfile);
-    # Remove Link of PPD file
-    run_program::rooted($prefix, 
-			"rm", "-f", 
-			"$configprefix/share/psprint/driver/$queue.PS");
-    return $configfile;
-}
-
-sub findsofficeconfigfile {
-    my @configfilenames = 
-	("/usr/lib/*/share/xp3/Xpdefaults",
-	 "/usr/local/lib/*/share/xp3/Xpdefaults",
-	 "/usr/local/*/share/xp3/Xpdefaults",
-	 "/opt/*/share/xp3/Xpdefaults");
-    my $configfilename = "";
-    for $configfilename (@configfilenames) {
-	local *F;
-	if (open F, "ls -r $prefix$configfilename 2> /dev/null |") {
-	    my $filename = <F>;
-	    close F;
-	    if ($filename) {return $filename};
-	}
-    }
-    return "";
-}
-
-sub findopenofficeconfigfile {
-    my @configfilenames =
-	("/usr/lib/*/share/psprint/psprint.conf",
-	 "/usr/local/lib/*/share/psprint/psprint.conf",
-	 "/usr/local/*/share/psprint/psprint.conf",
-	 "/opt/*/share/psprint/psprint.conf");
-    my $configfilename = "";
-    for $configfilename (@configfilenames) {
-	local *F;
-	if (open F, "ls -r $prefix$configfilename 2> /dev/null |") {
-	    my $filename = <F>;
-	    close F;
-	    if ($filename) {return $filename};
-	}
-    }
-    return "";
-}
-
-sub readsofficeconfigfile {
-    my ($file) = @_;
-    local *F; 
-    open F, "< $prefix$file" || return "";
-    my $filecontent = join("", <F>);
-    close F;
-    return $filecontent;
-}
-
-sub writesofficeconfigfile {
-    my ($file, $filecontent) = @_;
-    local *F; 
-    open F, "> $prefix$file" || return 0;
-    print F $filecontent;
-    close F;
-    return 1;
-}
-
-sub getcupsremotequeues {
-    # The following code reads in a list of all remote printers which the
-    # local CUPS daemon knows due to broadcasting of remote servers or 
-    # "BrowsePoll" entries in the local /etc/cups/cupsd.conf
-    local *F;
-    open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . 
-	"lpstat -v |" || return ();
-    my @printerlist = ();
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
-	    my $queuename = $1;
-	    if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
-		(!$printer->{configured}{$queuename})) {
-		my $server = $1;
-		push (@printerlist, "$queuename|$server");
-	    }
-	}
-    }
-    close F;
-    return @printerlist;
-}
-
-sub addentry {
-    my ($section, $entry, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $entryinserted = 0;
-    my @lines = split("\n", $filecontent);
-    local $_;
-    for (@lines) {
-	if (!$sectionfound) {
-	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
-		$sectionfound = 1;
-	    }
-	} else {
-	    if (($_ !~ /^\s*$/) && ($_ !~ /^\s*;/)) {
-		$_ = "$entry\n$_";
-		$entryinserted = 1;
-		last;
-	    }
-	}
-    }
-    if ($sectionfound && !$entryinserted) {
-	push(@lines, $entry);
-    }
-    return join ("\n", @lines);
-}
-
-sub addsection {
-    my ($section, $filecontent) = @_;
-    my $entryinserted = 0;
-    my @lines = split("\n", $filecontent);
-    local $_;
-    for (@lines) {
-	if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
-	    # section already there, nothing to be done
-	    return $filecontent;
-	}
-    }
-    return $filecontent . "\n[$section]";
-}
-
-sub removeentry {
-    my ($section, $entry, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $done = 0;
-    my @lines = split("\n", $filecontent);
-    local $_;
-    for (@lines) {
-	$_ = "$_\n";
-	next if ($done);
-	if (!$sectionfound) {
-	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
-		$sectionfound = 1;
-	    }
-	} else {
-	    if ($_ =~ /^\s*\[.*\]\s*$/) { # Next section
-		$done = 1;
-	    } elsif ($_ =~ /^\s*$entry/) {
-		$_ = "";
-		$done = 1;
-	    }
-	}
-    }
-    return join ("", @lines);
-}
-
-sub removesection {
-    my ($section, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $done = 0;
-    my @lines = split("\n", $filecontent);
-    local $_;
-    for (@lines) {
-	$_ = "$_\n";
-	next if ($done);
-	if (!$sectionfound) {
-	    if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
-		$_ = "";
-		$sectionfound = 1;
-	    }
-	} else {
-	    if ($_ =~ /^\s*\[.*\]\s*$/) { # Next section
-		$done = 1;
-	    } else {
-		$_ = "";
-	    }
-	}
-    }
-    return join ("", @lines);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
deleted file mode 100644
index b5a15c178..000000000
--- a/perl-install/printerdrake.pm
+++ /dev/null
@@ -1,2931 +0,0 @@
-package printerdrake;
-# $Id$
-use diagnostics;
-use strict;
-
-
-use common;
-use detect_devices;
-use modules;
-use network;
-use log;
-use printer;
-
-1;
-
-sub choose_printer_type {
-    my ($printer, $in) = @_;
-    $in->set_help('configurePrinterConnected') if $::isInstall;
-    my $queue = $printer->{OLD_QUEUE};
-    $printer->{str_type} = $printer::printer_type_inv{$printer->{TYPE}};
-    $printer->{str_type} = 
-	$in->ask_from_list_(_("Select Printer Connection"),
-			    _("How is the printer connected?") .
-			    ($printer->{SPOOLER} eq "cups" ?
-			     _("
-Printers on remote CUPS servers you do not have to configure here; these printers will be automatically detected.") : ()),
-			    [ printer::printer_type($printer) ],
-			    $printer->{str_type},
-			    ) or return 0;
-    $printer->{TYPE} = $printer::printer_type{$printer->{str_type}};
-    1;
-}
-
-sub config_cups {
-    my ($printer, $in, $upNetwork) = @_;
-
-    local $::isWizard = 0;
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('configureRemoteCUPSServer') if $::isInstall;
-    my $queue = $printer->{OLD_QUEUE};
-    #- hack to handle cups remote server printing,
-    #- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port
-    my ($server, $port, $default, $autoconf);
-    # Return value: 0 when nothing was changed ("Apply" never pressed), 1
-    # when "Apply" was at least pressed once.
-    my $retvalue = 0;
-    # Read CUPS config file
-    my @cupsd_conf = printer::read_cupsd_conf();
-    foreach (@cupsd_conf) {
-	/^\s*BrowsePoll\s+(\S+)/ and $server = $1, last;
-    }
-    $server =~ /([^:]*):(.*)/ and ($server, $port) = ($1, $2);
-    #- Did we have automatic or manual configuration mode for CUPS
-    $autoconf = printer::get_cups_autoconf();
-    #- Remember the server/port/autoconf settings to check whether the user
-    #- has changed them.
-    my $oldserver = $server;
-    my $oldport = $port;
-    my $oldautoconf = $autoconf;
-    
-    #- then ask user for this combination and rewrite /etc/cups/cupsd.conf
-    #- according to new settings. There are no other point where such
-    #- information is written in this file.
-    
-    if ($in->ask_from_
-	({ title => ($::expert ? _("CUPS configuration") :
-		     _("Specify CUPS server")),
-	   messages => _("To get access to printers on remote CUPS servers in your local network you do not have to configure anything; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. When your CUPS server is not in your local network, you have to enter the CUPS server IP address and optionally the port number to get the printer information from the server, otherwise leave these fields blank.") .
-	       ($::expert ? "\n" . _("
-Normally, CUPS is automatically configured according to your network environment, so that you can access the printers on the CUPS servers in your local network. If this does not work correctly, turn off \"Automatic CUPS configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not forget to restart CUPS afterwards (command: \"service cups restart\").") : ()),
-	   callbacks => { complete => sub {
-	       unless (!$server || network::is_ip($server)) {
-		   $in->ask_warn('', _("The IP address should look like 192.168.1.20"));
-		   return (1,0);
-	       }
-	       if ($port !~ /^\d*$/) {
-		   $in->ask_warn('', _("The port number should be an integer!"));
-		   return (1,1);
-	       }
-	       return 0;
-	   } }
-       },
-	 [	
-		{ label => _("CUPS server IP"), val => \$server },
-		{ label => _("Port"), val => \$port },
-		($::expert ?
-		 { text => _("Automatic CUPS configuration"), type => 'bool',
-		   val => \$autoconf } : ()),
-	 ]
-	 )) {
-	# We have clicked "OK"
-	$retvalue = 1;
-	# Set BrowsePoll line
-	if (($server ne $oldserver) || ($port ne $oldport)) {
-	    $server && $port and $server = "$server:$port";
-	    if ($server) {
-		@cupsd_conf = 
-		    map { $server and 
-			      s/^\s*BrowsePoll\s+(\S+)/BrowsePoll $server/ and
-			      $server = '';
-			  $_ } @cupsd_conf;
-		$server and push @cupsd_conf, "\nBrowsePoll $server\n";
-	    } else {
-		@cupsd_conf = 
-		    map { s/^\s*BrowsePoll\s+(\S+)/\#BrowsePoll $1/;
-			  $_ } @cupsd_conf;
-	    }
-	    printer::write_cupsd_conf(@cupsd_conf);
-	}
-	# Set auto-configuration state
-	if ($autoconf != $oldautoconf) {
-	    printer::set_cups_autoconf($autoconf);
-	}
-	# Save user settings for auto-install
-	$printer->{BROWSEPOLLADDR} = $server;
-	$printer->{BROWSEPOLLPORT} = $port;
-	$printer->{MANUALCUPSCONFIG} = 1 - $autoconf;
-    }
-    return $retvalue;
-}
-
-sub setup_printer_connection {
-    my ($printer, $in, $upNetwork) = @_;
-    # Choose the appropriate connection config dialog
-    my $done = 1;
-    for ($printer->{TYPE}) {
-	/LOCAL/     and setup_local    ($printer, $in) and last;
-	/LPD/       and setup_lpd      ($printer, $in, $upNetwork) and last;
-	/SOCKET/    and setup_socket   ($printer, $in, $upNetwork) and last;
-	/SMB/       and setup_smb      ($printer, $in, $upNetwork) and last;
-	/NCP/       and setup_ncp      ($printer, $in, $upNetwork) and last;
-	/URI/       and setup_uri      ($printer, $in, $upNetwork) and last;
-	/POSTPIPE/  and setup_postpipe ($printer, $in) and last;
-	$done = 0; last;
-    }
-    return $done;
-}
-
-sub auto_detect {
-    my ($in) = @_;
-    {
-	my $w = $in->wait_message(_("Test ports"), _("Detecting devices..."));
-	modules::get_alias("usb-interface") and eval { modules::load("printer") };
-	eval { modules::unload(qw(lp parport_pc parport_probe parport)) }; #- on kernel 2.4 parport has to be unloaded to probe again
-	eval { modules::load(qw(parport_pc lp parport_probe)); }; #- take care as not available on 2.4 kernel (silent error).
-    }
-    my $b = before_leaving { eval { modules::unload("parport_probe") } };
-    detect_devices::whatPrinter();
-}
-
-sub wizard_welcome {
-    my ($printer, $in) = @_;
-    my $ret;
-    my $autodetect = 1;
-    $autodetect = 0 if ($printer->{NOAUTODETECT});
-    if ($in) {
-	eval {
-	    if ($::expert) {
-		$ret = $in->ask_okcancel
-		    (_("Add a new printer"),
-		     _("
-Welcome to the Printer Setup Wizard
-
-This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
-
-It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types."));
-	    } else {
-		$ret = $in->ask_from_
-		    ({title => _("Local Printer"),
-		      messages => _("
-Welcome to the Printer Setup Wizard
-
-This wizard will help you to install your printer(s) connected to this computer.
-
-Please plug in your printer(s) on this computer and turn it/them on. Click on \"Next\" when you are ready, and on \"Cancel\" when you do not want to set up your printer(s) now.
-
-Note that some computers can crash during the printer auto-detection, turn off \"Auto-detect printers\" to do a printer installation without auto-detection. Use the \"Expert Mode\" of printerdrake when you want to set up printing on a remote printer if printerdrake does not list it automatically.")},
-		     [
-		      { text => _("Auto-detect printers"), type => 'bool',
-			val => \$autodetect},
-		      ]);
-		if (!$autodetect) {
-		    $printer->{NOAUTODETECT} = 1;
-		} else {
-		    undef $printer->{NOAUTODETECT};
-		}
-	    }
-	};
-	return ($@ =~ /wizcancel/) ? 0 : $ret;
-    }
-}
-
-sub wizard_congratulations {
-    my ($in) = @_;
-    if ($in) {
-	$in->ask_okcancel(_("Local Printer"),
-			  _("
-Congratulations, your printer is now installed and configured!
-
-You can print using the \"Print\" command of your application (usually in the \"File\" menu).
-
-If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the Mandrake Control Center."))
-    }
-}
-
-sub setup_local {
-    my ($printer, $in) = @_;
-    my (@port, @str, $device);
-    my $queue = $printer->{OLD_QUEUE};
-    my $do_auto_detect;
-    if ((!$::expert) && ($::isWizard)) {
-	$do_auto_detect = !$printer->{NOAUTODETECT};
-    } else {
-	local $::isWizard = 0;
-	my $res = $in->ask_from_list_
-	    (_("Auto-Detection of Printers"),
-	     _("Printerdrake is able to auto-detect your locally connected parallel and USB printers for you, but note that on some systems the auto-detection CAN FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON YOUR OWN RISK!
-
-Do you really want to get your printers auto-detected?"),
-	     [_("Do auto-detection"),
-	      _("Set up printer manually")],
-	     _("Do auto-detection"));
-	$do_auto_detect = ($res eq _("Do auto-detection"));
-    }
-    my @parport = ();
-    my $menuentries = {};
-    $in->set_help('setupLocal') if $::isInstall;
-    if ($do_auto_detect) {
-	# When HPOJ is running, it blocks the printer ports on which it is
-	# configured, so we stop it here. If it is not installed or not 
-	# configured, this command has no effect.
-	printer::stop_service("hpoj");
-	@parport = auto_detect($in);
-	# We have more than one printer, so we must ask the user for a queue
-	# name in the fully automatic printer configuration.
-	$printer->{MORETHANONE} = ($#parport > 0);
-	for my $p (@parport) {
-	    if ($p->{val}{DESCRIPTION}) {
-		my $menustr = $p->{val}{DESCRIPTION};
-		if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
-		    $menustr .= _(" on parallel port \#%s", $1);
-		} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
-		    $menustr .= _(", USB printer \#%s", $1);
-		}
-		if ($::expert) {
-		    $menustr .= " ($p->{port})";
-		}
-		$menuentries->{$menustr} = $p->{port};
-		push @str, _("Detected %s", $menustr);
-	    } else {
-		my $menustr;
-		if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
-		    $menustr = _("Printer on parallel port \#%s", $1);
-		} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
-		    $menustr = _("USB printer \#%s", $1);
-		}
-		if ($::expert) {
-		    $menustr .= " ($p->{port})";
-		}
-		$menuentries->{$menustr} = $p->{port};
-	    }
-	}
-	if ($::expert) {
-	    @port = detect_devices::whatPrinterPort();
-	    for my $q (@port) {
-		if (@str) {
-		    my $alreadyfound = 0;
-		    for my $p (@parport) {
-			if ($p->{port} eq $q) {
-			    $alreadyfound = 1;
-			    last;
-			}
-		    }
-		    if ($alreadyfound) {
-			next;
-		    }
-		}
-		my $menustr;
-		if ($q =~ m!^/dev/lp(\d+)$!) {
-		    $menustr = _("Printer on parallel port \#%s", $1);
-		} elsif ($q =~ m!^/dev/usb/lp(\d+)$!) {
-		    $menustr = _("USB printer \#%s", $1);
-		}
-		if ($::expert) {
-		    $menustr .= " ($q)";
-		}
-		$menuentries->{$menustr} = $q;
-	    }
-	}
-	# We are ready with auto-detection, so we restart HPOJ here. If it 
-	# is not installed or not configured, this command has no effect.
-	printer::start_service("hpoj");
-    } else {
-	# Always ask for queue name in recommended mode when no auto-
-	# detection was done
-	$printer->{MORETHANONE} = ($#parport > 0);
-	my $m;
-	for ($m = 0; $m <= 2; $m++) {
-	    my $menustr = _("Printer on parallel port \#%s", $m);
-	    if ($::expert) {
-		$menustr .= " (/dev/lp$m)";
-	    }
-	    $menuentries->{$menustr} = "/dev/lp$m";
-	    $menustr = _("USB printer \#%s", $m);
-	    if ($::expert) {
-		$menustr .= " (/dev/usb/lp$m)";
-	    }
-	    $menuentries->{$menustr} = "/dev/usb/lp$m";
-	}
-    }
-    my @menuentrieslist = sort { $menuentries->{$a} cmp $menuentries->{$b} }
-    keys(%{$menuentries});
-    my $menuchoice = "";
-    my $oldmenuchoice = "";
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^file:/)) {
-	# Non-HP or HP print-only device (HPOJ not used)
-	$device = $printer->{currentqueue}{'connect'};
-	$device =~ s/^file://;
-	for my $p (keys %{$menuentries}) {
-	    if ($device eq $menuentries->{$p}) {
-		$menuchoice = $p;
-		last;
-	    }
-	}
-    } elsif (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m!^ptal:/mlc:!)) {
-	# HP multi-function device (controlled by HPOJ)
-	my $ptaldevice = $printer->{currentqueue}{'connect'};
-	$ptaldevice =~ s!^ptal:/mlc:!!;
-	if ($ptaldevice =~ /^par:(\d+)$/) {
-	    $device = "/dev/lp$1";
-	    for my $p (keys %{$menuentries}) {
-		if ($device eq $menuentries->{$p}) {
-		    $menuchoice = $p;
-		    last;
-		}
-	    }
-	} else {
-	    my $make = lc($printer->{currentqueue}{'make'});
-	    my $model = lc($printer->{currentqueue}{'model'});
-	    $device = "";
-	    for my $p (keys %{$menuentries}) {
-		my $menumakemodel = lc($p);
-		if (($menumakemodel =~ /$make/) && 
-		    ($menumakemodel =~ /$model/)) {
-		    $menuchoice = $p;
-		    $device = $menuentries->{$p};
-		    last;
-		}
-	    }
-	}
-    } else {
-	$device = "";
-    }
-    if (($menuchoice eq "") && (@menuentrieslist > -1)) {
-	$menuchoice = $menuentrieslist[0];
-	$oldmenuchoice = $menuchoice;
-	if ($device eq "") {
-	    $device = $menuentries->{$menuchoice};
-	}
-    }
-    if ($in) {
-	$::expert or $in->set_help('configurePrinterDev') if $::isInstall;
-	if ($#menuentrieslist < 0) { # No menu entry
-	    # auto-detection has failed, we must do all manually
-	    $do_auto_detect = 0;
-	    $printer->{MANUAL} = 1;
-	    if ($::expert) {
-		$device = $in->ask_from_entry
-		    (_("Local Printer"),
-		     _("No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."),
-		     { 
-			 complete => sub {
-			     unless ($menuchoice ne "") {
-				 $in->ask_warn('', _("You must enter a device or file name!"));
-				 return (1,0);
-			     }
-			     return 0;
-			 }
-		     });
-		if ($device eq "") {
-		    return 0;
-		}
-	    } else {
-		$in->ask_warn(_("Local Printer"),
-			      _("No local printer found!\n\n") . 
-			      ($::isInstall ? _("Network printers can only be installed after the installation. Choose \"Hardware\" and then \"Printer\" in the Mandrake Control Center.") :
-			       _("To install network printers, click \"Cancel\", switch to the \"Expert Mode\", and click \"Add a new printer\" again.")));
-		return 0;
-	    }
-	} else {
-	    my $manualconf = 0;
-	    $manualconf = 1 if (($printer->{MANUAL}) || (!$do_auto_detect));
-	    if (!$in->ask_from_(
-	    {title => _("Local Printer"),
-	     messages => (($do_auto_detect ?
-			  ($::expert ?
-			   (($#menuentrieslist == 0) ?
-_("The following printer was auto-detected, if it is not the one you want to configure, enter a device name/file name in the input line") :
-_("Here is a list of all auto-detected printers. Please choose the printer you want to set up or enter a device name/file name in the input line")) :
-			   (($#menuentrieslist == 0) ?
-_("The following printer was auto-detected. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\".") :
-_("Here is a list of all auto-detected printers. Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."))) :
-			  ($::expert ?
-_("Please choose the port where your printer is connected to or enter a device name/file name in the input line") :
-_("Please choose the port where your printer is connected to."))) .
-			 ($::expert ?
-_(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).") :
-			  ())), 
-             callbacks => {
-		 complete => sub {
-		     unless ($menuchoice ne "") {
-			 $in->ask_warn('', _("You must choose/enter a printer/device!"));
-			 return (1,0);
-		     }
-		     return 0;
-		 },
-		 changed => sub {
-		     if ($oldmenuchoice ne $menuchoice) {
-			 $device = $menuentries->{$menuchoice};
-			 $oldmenuchoice = $menuchoice;
-		     }
-		     return 0;
-		 }
-	     }},
-            [
-	     ($::expert ? 
-	      { val => \$device } : ()),
-	     { val => \$menuchoice, list => \@menuentrieslist, 
-	       not_edit => !$::expert, format => \&translate,
-	       allow_empty_list => 1, type => 'list' },
-	     (((!$::expert) && ($do_auto_detect) && ($printer->{NEW})) ? 
-	      { text => _("Manual configuration"), type => 'bool',
-		val => \$manualconf } : ()),
-	    ]
-	    )) {
-		return 0;
-	    }
-	    if ($device ne $menuentries->{$menuchoice}) {
-		$menuchoice = "";
-		$do_auto_detect = 0;
-	    }
-	    if ($manualconf) {
-		$printer->{MANUAL} = 1;
-	    } else {
-		undef $printer->{MANUAL};
-	    }
-	}
-    }
-
-    #- Check whether the printer is an HP multi-function device and 
-    #- configure HPOJ if it is one
-
-    my $ptaldevice = "";
-    my $isHPOJ = 0;
-    if (!$do_auto_detect) {
-	local $::isWizard = 0;
-	$isHPOJ = $in->ask_yesorno(_("Local Printer"),
-				   _("Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an HP LaserJet 2200?"), 0);
-    }
-    if (($menuchoice =~ /HP\s+OfficeJet/i) ||
-	($menuchoice =~ /HP\s+PSC/i) ||
-	($menuchoice =~ /HP\s+PhotoSmart\s+P?\s*100\D/i) ||
-	($menuchoice =~ /HP\s+PhotoSmart\s+P?\s*1315/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+1100/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+1200/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+1220/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+2200/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+3200/i) ||
-	($menuchoice =~ /HP\s+LaserJet\s+33.0/i) ||
-	($isHPOJ)) {
-	# Install HPOJ package
-	if ((!$::testing) &&
-	    (!printer::files_exist((qw(/usr/sbin/ptal-mlcd
-				       /etc/ptal-start.conf))))) {
-	    my $w = $in->wait_message('', _("Installing HPOJ package..."));
-	    $in->do_pkgs->install('hpoj');
-	}
-	# Configure and start HPOJ
-	my $w = $in->wait_message
-	    ('', _("Checking device and configuring HPOJ..."));
-	$ptaldevice = printer::configure_hpoj($device, @parport);
-
-	if ($ptaldevice) {
-	    # Configure scanning with SANE on the MF device
-	    if (($menuchoice =~ /HP\s+OfficeJet\s+[KVRGPD]/i) ||
-		($menuchoice =~ /HP\s+PSC\s+[579]/i)) {
-		# Install SANE
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/bin/scanimage
-					       /usr/bin/xscanimage
-					       /usr/bin/xsane
-					       /etc/sane.d/dll.conf),
-					    (printer::files_exist
-					     ('/usr/bin/gimp') ? 
-					     '/usr/bin/xsane-gimp' : 
-					     ()))))) {
-		    my $w = $in->wait_message
-			('', _("Installing SANE package..."));
-		    $in->do_pkgs->install('sane-backends', 'sane-frontends',
-					  'xsane', 
-					  if_($in->do_pkgs->is_installed
-					      ('gimp'),'xsane-gimp'));
-		}
-		# Configure the HP SANE backend
-		printer::config_sane($ptaldevice);
-	    }
-	    # Inform user about how to scan with his MF device
-	    my $text = scanner_help($menuchoice, "ptal:/$ptaldevice");
-	    if ($text) {
-		$in->ask_warn(_("Scanning on your HP multi-function device"),
-			      $text);
-	    }
-	    # make the DeviceURI from $ptaldevice.
-	    $printer->{currentqueue}{'connect'} = "ptal:/" . $ptaldevice;
-	} else {
-	    # make the DeviceURI from $device.
-	    $printer->{currentqueue}{'connect'} = "file:" . $device;
-	}
-    } else {
-	# make the DeviceURI from $device.
-	$printer->{currentqueue}{'connect'} = "file:" . $device;
-    }
-
-    #- if CUPS is the spooler, make sure that CUPS knows the device
-    if ($printer->{SPOOLER} eq "cups") {
-	my $w = $in->wait_message
-	    ('', _("Making printer port available for CUPS..."));
-	if ($ptaldevice eq "") {
-	    printer::assure_device_is_available_for_cups($device);
-	} else {
-	    printer::assure_device_is_available_for_cups($ptaldevice);
-	}
-    }
-
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-
-    #- Search the database entry which matches the detected printer best
-    my $descr = "";
-    foreach (@parport) {
-	$device eq $_->{port} or next;
-	if (($_->{val}{MANUFACTURER}) && ($_->{val}{MODEL})) {
-	    $descr = "$_->{val}{MANUFACTURER} $_->{val}{MODEL}";
-	} else {
-	    $descr = $_->{val}{DESCRIPTION};
-	}
-	# Clean up the description from noise which makes the best match
-	# difficult
-	$descr =~ s/\s+Inc\.//;
-	$descr =~ s/\s+Corp\.//;
-	$descr =~ s/\s+SA\.//;
-	$descr =~ s/\s+S\.\s*A\.//;
-	$descr =~ s/\s+Ltd\.//;
-	$descr =~ s/\s+International//;
-	$descr =~ s/\s+Int\.//;
-	$descr =~ s/\s+[Ss]eries//;
-	$descr =~ s/\s+\(?[Pp]rinter\)?$//;
-	$printer->{DBENTRY} = "";
-	for my $entry (keys(%printer::thedb)) {
-	    if ($entry =~ m!$descr!) {
-		$printer->{DBENTRY} = $entry;
-		last;
-	    }
-	}
-	if (!$printer->{DBENTRY}) {
-	    $printer->{DBENTRY} =
-		bestMatchSentence ($descr, keys %printer::thedb);
-	}
-        # If the manufacturer was not guessed correctly, discard the
-        # guess.
-        $printer->{DBENTRY} =~ /^([^\|]+)\|/;
-        my $guessedmake = lc($1);
-        if (($descr !~ /$guessedmake/i) &&
-            (($guessedmake ne "hp") ||
-             ($descr !~ /Hewlett[\s-]+Packard/i)))
-            {$printer->{DBENTRY} = ""};
-    }
-
-    #- Pre-fill the "Description" field with the printer's model name
-    if ((!$printer->{currentqueue}{'desc'}) && ($descr)) {
-	$printer->{currentqueue}{'desc'} = $descr;
-	$printer->{currentqueue}{'desc'} =~ s/\|/ /g;
-    }
-
-    #- When we have chosen a printer here, the question whether the
-    #- automatically chosen model from the database is correct, should
-    #- have "This model is correct" as default answer
-    delete($printer->{MANUALMODEL});
-
-    1;
-}
-
-sub setup_lpd {
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('setupLPD') if $::isInstall;
-    my ($uri, $remotehost, $remotequeue);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^lpd:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!;
-	$remotehost = $1;
-	$remotequeue = $2;
-    } else {
-	$remotehost = "";
-	$remotequeue = "lp";
-    }
-
-    return if !$in->ask_from(_("Remote lpd Printer Options"),
-_("To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."), [
-{ label => _("Remote host name"), val => \$remotehost },
-{ label => _("Remote printer name"), val => \$remotequeue } ],
-complete => sub {
-    unless ($remotehost ne "") {
-	$in->ask_warn('', _("Remote host name missing!"));
-	return (1,0);
-    }
-    unless ($remotequeue ne "") {
-	$in->ask_warn('', _("Remote printer name missing!"));
-	return (1,1);
-    }
-    return 0;
-}
-			      );
-    #- make the DeviceURI from user input.
-    $printer->{currentqueue}{'connect'} = 
-        "lpd://$remotehost/$remotequeue";
-
-    #- LPD does not support filtered queues to a remote LPD server by itself
-    #- It needs an additional program as "rlpr"
-    if (($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/rlpr))))) {
-        $in->do_pkgs->install('rlpr');
-    }
-
-    1;
-}
-
-sub setup_smb {
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('setupSMB') if $::isInstall;
-    my ($uri, $smbuser, $smbpassword, $workgroup, $smbserver, $smbserverip, $smbshare);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^smb:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*smb://(.*)$!;
-	my $parameters = $1;
-	# Get the user's login and password from the URI
-	if ($parameters =~ m!([^@]*)@([^@]+)!) {
-	    my $login = $1;
-	    $parameters = $2;
-	    if ($login =~ m!([^:]*):([^:]*)!) {
-		$smbuser = $1;
-		$smbpassword = $2;
-	    } else {
-		$smbuser = $login;
-		$smbpassword = "";
-	    }
-	} else {
-	    $smbuser = "";
-	    $smbpassword = "";
-	}
-	# Get the workgroup, server, and share name
-	if ($parameters =~ m!([^/]*)/([^/]+)/([^/]+)$!) {
-	    $workgroup = $1;
-	    $smbserver = $2;
-	    $smbshare = $3;
-	} elsif ($parameters =~ m!([^/]+)/([^/]+)$!) {
-	    $workgroup = "";
-	    $smbserver = $1;
-	    $smbshare = $2;
-	} else {
-	    die "The \"smb://\" URI must at least contain the server name and the share name!\n";
-	}
-	if (network::is_ip($smbserver)) {
-	    $smbserverip = $smbserver;
-	    $smbserver = "";
-	}
-    }
-
-    return if !$in->ask_from(_("SMB (Windows 9x/NT) Printer Options"),
-_("To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information."), [
-{ label => _("SMB server host"), val => \$smbserver },
-{ label => _("SMB server IP"), val => \$smbserverip },
-{ label => _("Share name"), val => \$smbshare },
-{ label => _("User name"), val => \$smbuser },
-{ label => _("Password"), val => \$smbpassword, hidden => 1 },
-{ label => _("Workgroup"), val => \$workgroup }, ],
-complete => sub {
-    unless ((network::is_ip($smbserverip)) || ($smbserverip eq "")) {
-	$in->ask_warn('', _("IP address should be in format 1.2.3.4"));
-	return (1,1);
-    }
-    unless (($smbserver ne "") || ($smbserverip ne "")) {
-	$in->ask_warn('', _("Either the server name or the server's IP must be given!"));
-	return (1,0);
-    }
-    unless ($smbshare ne "") {
-	$in->ask_warn('', _("Samba share name missing!"));
-	return (1,2);
-    }
-    unless ($smbpassword eq "") {
-	local $::isWizard = 0;
-	my $yes = $in->ask_yesorno(_("SECURITY WARNING!"),
-_("You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".
-
-We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
-
-Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
-
-Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.
-
-", _("Printer on remote lpd server")) .
-($::expert ? 
-_("Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.
-
-", _("Enter a printer device URI")) : "") .
-_("Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
-
-Do you really want to continue setting up this printer as you are doing now?"), 0);
-	return 0 if $yes;
-	return (1,2);
-    }
-    return 0;
-}
-    );
-    #- make the DeviceURI from, try to probe for available variable to
-    #- build a suitable URI.
-    $printer->{currentqueue}{'connect'} =
-    join '', ("smb://", ($smbuser && ($smbuser . 
-    ($smbpassword && ":$smbpassword") . "@")), ($workgroup && ("$workgroup/")),
-    ($smbserver || $smbserverip), "/$smbshare");
-
-    if ((!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/smbclient))))) {
-	$in->do_pkgs->install('samba-client');
-    }
-    $printer->{SPOOLER} eq 'cups' and printer::restart_queue($printer);
-    1;
-}
-
-sub setup_ncp {
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('setupNCP') if $::isInstall;
-    my ($uri, $ncpuser, $ncppassword, $ncpserver, $ncpqueue);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^ncp:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	my $parameters = $uri =~ m!^\s*ncp://(.*)$!;
-	# Get the user's login and password from the URI
-	if ($parameters =~ m!([^@]*)@([^@]+)!) {
-	    my $login = $1;
-	    $parameters = $2;
-	    if ($login =~ m!([^:]*):([^:]*)!) {
-		$ncpuser = $1;
-		$ncppassword = $2;
-	    } else {
-		$ncpuser = $login;
-		$ncppassword = "";
-	    }
-	} else {
-	    $ncpuser = "";
-	    $ncppassword = "";
-	}
-	# Get the workgroup, server, and share name
-	if ($parameters =~ m!([^/]+)/([^/]+)$!) {
-	    $ncpserver = $1;
-	    $ncpqueue = $2;
-	} else {
-	    die "The \"ncp://\" URI must at least contain the server name and the share name!\n";
-	}
-    }
-
-    return if !$in->ask_from(_("NetWare Printer Options"),
-_("To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."), [
-{ label => _("Printer Server"), val => \$ncpserver },
-{ label => _("Print Queue Name"), val => \$ncpqueue },
-{ label => _("User name"), val => \$ncpuser },
-{ label => _("Password"), val => \$ncppassword, hidden => 1 } ],
-complete => sub {
-    unless ($ncpserver ne "") {
-	$in->ask_warn('', _("NCP server name missing!"));
-	return (1,0);
-    }
-    unless ($ncpqueue ne "") {
-	$in->ask_warn('', _("NCP queue name missing!"));
-	return (1,1);
-    }
-    return 0;
-}
-					);
-    # Generate the Foomatic URI
-    $printer->{currentqueue}{'connect'} =
-    join '', ("ncp://", ($ncpuser && ($ncpuser . 
-    ($ncppassword && ":$ncppassword") . "@")),
-    "$ncpserver/$ncpqueue");
-
-    if ((!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nprint))))) {
-	$in->do_pkgs->install('ncpfs');
-    }
-
-    1;
-}
-
-sub setup_socket {
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork)) {return 0};
-
-    $in->set_help('setupSocket') if $::isInstall;
-    my ($hostname, $port, $uri, $remotehost,$remoteport);
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^socket:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	($remotehost, $remoteport) = $uri =~ m!^\s*socket://([^/:]+):([0-9]+)/?\s*$!;
-    } else {
-	$remotehost = "";
-	$remoteport = "9100";
-    }
-
-    return if !$in->ask_from(_("TCP/Socket Printer Options"),
-_("To print to a TCP or socket printer, you need to provide the host name of the printer and optionally the port number. On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware."), [
-{ label => _("Printer host name"), val => \$remotehost },
-{ label => _("Port"), val => \$remoteport } ],
-complete => sub {
-    unless ($remotehost ne "") {
-	$in->ask_warn('', _("Printer host name missing!"));
-	return (1,0);
-    }
-    unless ($remoteport =~ /^[0-9]+$/) {
-	$in->ask_warn('', _("The port number should be an integer!"));
-	return (1,1);
-    }
-    return 0;
-}
-					 );
-
-    #- make the Foomatic URI
-    $printer->{currentqueue}{'connect'} = 
-    join '', ("socket://$remotehost", $remoteport ? (":$remoteport") : ());
-
-    #- LPD and LPRng need netcat ('nc') to access to socket printers
-    if ((($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng'))&& 
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nc))))) {
-        $in->do_pkgs->install('nc');
-    }
-
-    1;
-}
-
-sub setup_uri {
-    my ($printer, $in, $upNetwork) = @_;
-
-    $in->set_help('setupURI') if $::isInstall;
-    return if !$in->ask_from(_("Printer Device URI"),
-_("You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."), [
-{ label => _("Printer Device URI"),
-val => \$printer->{currentqueue}{'connect'},
-list => [ $printer->{currentqueue}{'connect'},
-	  "file:/",
-	  "http://",
-	  "ipp://",
-	  "lpd://",
-	  "smb://",
-	  "ncp://",
-	  "socket://",
-	  "postpipe:\"\"",
-	  ], not_edit => 0 }, ],
-complete => sub {
-    unless ($printer->{currentqueue}{'connect'} =~ /[^:]+:.+/) {
-	$in->ask_warn('', _("A valid URI must be entered!"));
-	return (1,0);
-    }
-    return 0;
-}
-    );
-
-    # Non-local printer, check network and abort if no network available
-    if (($printer->{currentqueue}{'connect'} !~ m!^file:/!) &&
-        (!check_network($printer, $in, $upNetwork))) {return 0};
-
-    # If the chosen protocol needs additional software, install it.
-
-    # LPD does not support filtered queues to a remote LPD server by itself
-    # It needs an additional program as "rlpr"
-    if (($printer->{currentqueue}{'connect'} =~ /^lpd:/) &&
-	($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/rlpr))))) {
-        $in->do_pkgs->install('rlpr');
-    }
-    if (($printer->{currentqueue}{'connect'} =~ /^smb:/) &&
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/smbclient))))) {
-	$in->do_pkgs->install('samba-client');
-    }
-    if (($printer->{currentqueue}{'connect'} =~ /^ncp:/) &&
-	(!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nprint))))) {
-	$in->do_pkgs->install('ncpfs');
-    }
-    #- LPD and LPRng need netcat ('nc') to access to socket printers
-    if (($printer->{currentqueue}{'connect'} =~ /^socket:/) &&
-	(($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng')) &&
-        (!$::testing) &&
-        (!printer::files_exist((qw(/usr/bin/nc))))) {
-        $in->do_pkgs->install('nc');
-    }
-    1;
-}
-
-sub setup_postpipe {
-    my ($printer, $in) = @_;
-
-    $in->set_help('setupPostpipe') if $::isInstall;
-    my $uri;
-    my $commandline;
-    my $queue = $printer->{OLD_QUEUE};
-    if (($printer->{configured}{$queue}) &&
-	($printer->{currentqueue}{'connect'} =~ m/^postpipe:/)) {
-	$uri = $printer->{currentqueue}{'connect'};
-	$uri =~ m!^\s*postpipe:\"(.*)\"$!;
-	$commandline = $1;
-    } else {
-	$commandline = "";
-    }
-
-    return if !$in->ask_from(_("Pipe into command"),
-_("Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."), [
-{ label => _("Command line"),
-val => \$commandline }, ],
-complete => sub {
-    unless ($commandline ne "") {
-	$in->ask_warn('', _("A command line must be entered!"));
-	return (1,0);
-    }
-    return 0;
-}
-);
-
-    #- make the Foomatic URI
-    $printer->{currentqueue}{'connect'} = "postpipe:$commandline";
-    
-    1;
-}
-
-sub choose_printer_name {
-    my ($printer, $in) = @_;
-    # Name, description, location
-    $in->set_help('setupPrinterName') if $::isInstall;
-    my $default = $printer->{currentqueue}{'queue'};
-    $in->ask_from_
-	(
-	 { title => _("Enter Printer Name and Comments"),
-	   #cancel => !$printer->{configured}{$queue} ? '' : _("Remove queue"),
-	   callbacks => { complete => sub {
-	       unless ($printer->{currentqueue}{'queue'} =~ /^\w+$/) {
-		   $in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
-		   return (1,0);
-	       }
-	       local $::isWizard = 0;
-	       if (($printer->{configured}{$printer->{currentqueue}{'queue'}})
-		   && ($printer->{currentqueue}{'queue'} ne $default) && 
-		   (!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
-					    $printer->{currentqueue}{'queue'}),
-				      0))) {
-		   return (1,0); # Let the user correct the name
-	       }
-	       return 0;
-	   },
-		      },
-	   messages =>
-_("Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users.") }, 
-	 [ { label => _("Name of printer"), val => \$printer->{currentqueue}{'queue'} },
-	   { label => _("Description"), val => \$printer->{currentqueue}{'desc'} },
-	   { label => _("Location"), val => \$printer->{currentqueue}{'loc'} },
-	 ]) or return 0;
-
-    $printer->{QUEUE} = $printer->{currentqueue}{'queue'};
-    1;
-}
-
-sub get_db_entry {
-    my ($printer, $in) = @_;
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-    my $w = $in->wait_message('', _("Preparing printer database..."));
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue}) {
-	# The queue was already configured
-	if ($printer->{configured}{$queue}{'queuedata'}{'foomatic'}) {
-	    # The queue was configured with Foomatic
-	    my $driverstr;
-	    if ($printer->{configured}{$queue}{'queuedata'}{'driver'} eq "Postscript") {
-		$driverstr = "PostScript";
-	    } else {
-		$driverstr = "GhostScript + $printer->{configured}{$queue}{'queuedata'}{'driver'}";
-	    }
-	    my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
-	    my $model =	$printer->{configured}{$queue}{'queuedata'}{'model'};
-	    if ($::expert) {
-		$printer->{DBENTRY} = "$make|$model|$driverstr";
-		# database key contains the "(recommended)" for the
-		# recommended driver, so add it if necessary
-		if (!($printer::thedb{$printer->{DBENTRY}}{printer})) {
-		    $printer->{DBENTRY} .= " (recommended)";
-		}
-	    } else {
-		$printer->{DBENTRY} = "$make|$model";
-	    }
-	    $printer->{OLD_CHOICE} = $printer->{DBENTRY};
-	} elsif (($printer->{SPOOLER} eq "cups") && ($::expert) &&
-		 ($printer->{configured}{$queue}{'queuedata'}{'ppd'})) {
-	    # Do we have a native CUPS driver or a PostScript PPD file?
-	    $printer->{DBENTRY} = printer::get_descr_from_ppd($printer) || $printer->{DBENTRY};
-	    $printer->{OLD_CHOICE} = $printer->{DBENTRY};
-	} else {
-	    # Point the list cursor at least to manufacturer and model of the
-	    # printer
-	    $printer->{DBENTRY} = "";
-	    my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
-	    my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
-	    my $key;
-	    for $key (keys %printer::thedb) {
-		if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
-		    ((!$::expert) && ($key =~ /^$make\|$model$/))) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	    if ($printer->{DBENTRY} eq "") {
-		# Exact match of make and model did not work, try to clean
-		# up the model name
-		$model =~ s/PS//;
-		$model =~ s/PostScript//;
-		$model =~ s/Series//;
-		for $key (keys %printer::thedb) {
-		    if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
-			((!$::expert) && ($key =~ /^$make\|$model$/))) {
-			$printer->{DBENTRY} = $key;
-		    }
-		}
-	    }
-	    if (($printer->{DBENTRY} eq "") && ($make ne "")) {
-		# Exact match with cleaned-up model did not work, try a best match
-		my $matchstr = "$make|$model";
-		$printer->{DBENTRY} = bestMatchSentence($matchstr, keys %printer::thedb);
-		# If the manufacturer was not guessed correctly, discard the
-		# guess.
-		$printer->{DBENTRY} =~ /^([^\|]+)\|/;
-		my $guessedmake = lc($1);
-		if (($matchstr !~ /$guessedmake/i) &&
-		    (($guessedmake ne "hp") ||
-		     ($matchstr !~ /Hewlett[\s-]+Packard/i)))
-		{$printer->{DBENTRY} = ""};
-	    }
-	    # Set the OLD_CHOICE to a non-existing value
-	    $printer->{OLD_CHOICE} = "XXX";
-	}
-    } else {
-	if (($::expert) && ($printer->{DBENTRY} !~ /(recommended)/)) {
-	    my ($make, $model) = $printer->{DBENTRY} =~ /^([^\|]+)\|([^\|]+)\|/;
-	    for my $key (keys %printer::thedb) {
-		if ($key =~ /^$make\|$model\|.*\(recommended\)$/) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	}
-	$printer->{OLD_CHOICE} = $printer->{DBENTRY};
-    }
-}
-
-sub is_model_correct {
-    my ($printer, $in) = @_;
-    $in->set_help('chooseModel') if $::isInstall;
-    my $dbentry = $printer->{DBENTRY};
-    $dbentry =~ s/\|/ /g;
-    my $res = $in->ask_from_list_
-	    (_("Your printer model"),
-	     _("Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.
-
-For your printer Printerdrake has found:
-
-%s", $dbentry),
-	     [_("The model is correct"),
-	      _("Select model manually")],
-	     ($printer->{MANUALMODEL} ? _("Select model manually") : 
-	      _("The model is correct")));
-    return 0 if !$res;
-    $printer->{MANUALMODEL} = ($res eq _("Select model manually"));
-    1;
-}
-
-sub choose_model {
-    my ($printer, $in) = @_;
-    $in->set_help('chooseModel') if $::isInstall;
-    #- Read the printer driver database if necessary
-    if ((keys %printer::thedb) == 0) {
-	my $w = $in->wait_message('', _("Reading printer database..."));
-        printer::read_printer_db($printer->{SPOOLER});
-    }
-    if (!$printer::thedb{$printer->{DBENTRY}}) {
-	$printer->{DBENTRY} = _("Raw printer (No driver)");
-    }
-    # Choose the printer/driver from the list
-    return ($printer->{DBENTRY} = $in->ask_from_treelist(_("Printer model selection"),
-							 _("Which printer model do you have?") .
-							 _("
-
-Please check whether Printerdrake did the auto-detection of your printer model correctly. Search the correct model in the list when the cursor is standing on a wrong model or on \"Raw printer\".") . " " .
-_("If your printer is not listed, choose a compatible (see printer manual) or a similar one."), '|',
-							 [ keys %printer::thedb ], $printer->{DBENTRY}));
-
-}
-
-sub get_printer_info {
-    my ($printer, $in) = @_;
-    #- Read the printer driver database if necessary
-    #if ((keys %printer::thedb) == 0) {
-    #    my $w = $in->wait_message('', _("Reading printer database..."));
-    #    printer::read_printer_db($printer->{SPOOLER});
-    #}
-    my $queue = $printer->{OLD_QUEUE};
-    my $oldchoice = $printer->{OLD_CHOICE};
-    my $newdriver = 0;
-    if ((!$printer->{configured}{$queue}) ||      # New queue  or
-	(($oldchoice) && ($printer->{DBENTRY}) && # make/model/driver changed
-	 (($oldchoice ne $printer->{DBENTRY}) ||
-	  ($printer->{currentqueue}{'driver'} ne 
-	   $printer::thedb{$printer->{DBENTRY}}{'driver'})))) {
-	delete($printer->{currentqueue}{printer});
-	delete($printer->{currentqueue}{ppd});
-	$printer->{currentqueue}{foomatic} = 0;
-	# Read info from printer database
-	foreach (qw(printer ppd driver make model)) { #- copy some parameter, shorter that way...
-	    $printer->{currentqueue}{$_} = $printer::thedb{$printer->{DBENTRY}}{$_};
-	}
-	$newdriver = 1;
-    }
-    # Use the "printer" and not the "foomatic" field to identify a Foomatic
-    # queue because in a new queue "foomatic" is not set yet.
-    if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
-	($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
-	if ($printer->{currentqueue}{'printer'}) { # Foomatic queue?
-	    # In case of a new queue "foomatic" was not set yet
-	    $printer->{currentqueue}{'foomatic'} = 1;
-	    # Now get the options for this printer/driver combo
-	    if (($printer->{configured}{$queue}) && ($printer->{configured}{$queue}{'queuedata'}{'foomatic'})) {
-		# The queue was already configured with Foomatic ...
-		if (!$newdriver) {
-		    # ... and the user didn't change the printer/driver
-		    $printer->{ARGS} = $printer->{configured}{$queue}{'args'};
-		} else {
-		    # ... and the user has chosen another printer/driver
-		    $printer->{ARGS} = printer::read_foomatic_options($printer);
-		}
-	    } else {
-		# The queue was not configured with Foomatic before
-		# Set some special options
-		$printer->{SPECIAL_OPTIONS} = '';
-		# Default page size depending on the country/language
-		# (US/Canada -> Letter, Others -> A4)
-		my $pagesize;
-		if ($printer->{PAPERSIZE}) {
-		    $printer->{SPECIAL_OPTIONS} .= 
-			" -o PageSize=$printer->{PAPERSIZE}";
-		} elsif (($pagesize = $in->{lang}) ||
-			 ($pagesize = $ENV{'LC_PAPER'}) ||
-			 ($pagesize = $ENV{'LANG'}) ||
-			 ($pagesize = $ENV{'LANGUAGE'}) ||
-			 ($pagesize = $ENV{'LC_ALL'})) {
-		    if (($pagesize =~ /^en_CA/) ||
-			($pagesize =~ /^fr_CA/) || 
-			($pagesize =~ /^en_US/)) {
-			$pagesize = "Letter";
-		    } else {
-			$pagesize = "A4";
-		    }
-		    $printer->{SPECIAL_OPTIONS} .= 
-			" -o PageSize=$pagesize";
-		}
-		# oki4w driver -> OKI winprinter which needs the
-		# oki4daemon to work
-		if ($printer->{currentqueue}{'driver'} eq 'oki4w') {
-		    if ($printer->{currentqueue}{'connect'} ne 
-			'file:/dev/lp0') {
-			$in->ask_warn(_("OKI winprinter configuration"),
-				      _("You are configuring an OKI laser winprinter. These printers\nuse a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."));
-		    }
-		    $printer->{currentqueue}{'connect'} = 'file:/dev/null';
-		    # Start the oki4daemon
-		    printer::start_service_on_boot('oki4daemon');
-		    printer::start_service('oki4daemon');
-		    # Set permissions
-		    if ($printer->{SPOOLER} eq 'cups') {
-			printer::set_permissions('/dev/oki4drv', '660', 'lp',
-						 'sys');
-		    } elsif ($printer->{SPOOLER} eq 'pdq') {
-			printer::set_permissions('/dev/oki4drv', '666');
-		    } else {
-			printer::set_permissions('/dev/oki4drv', '660', 'lp',
-						 'lp');
-		    }
-		} elsif ($printer->{currentqueue}{'driver'} eq 'lexmarkinkjet') {
-		    # Set "Port" option
-		    if ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp0') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort1";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp1') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort2";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/lp2') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=ParPort3";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp0') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB1";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp1') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB2";
-		    } elsif ($printer->{currentqueue}{'connect'} eq 
-			'file:/dev/usb/lp2') {
-			$printer->{SPECIAL_OPTIONS} .= 
-			    " -o Port=USB3";
-		    } else {
-			$in->ask_warn(_("Lexmark inkjet configuration"),
-				      _("The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."));
-			return 0;
-		    }
-		    # Set device permissions
-		    $printer->{currentqueue}{'connect'} =~ /^\s*file:(\S*)\s*$/;
-		    if ($printer->{SPOOLER} eq 'cups') {
-			printer::set_permissions($1, '660', 'lp', 'sys');
-		    } elsif ($printer->{SPOOLER} eq 'pdq') {
-			printer::set_permissions($1, '666');
-		    } else {
-			printer::set_permissions($1, '660', 'lp', 'lp');
-		    }
-		    # This is needed to have the device not blocked by the
-		    # spooler backend.
-		    $printer->{currentqueue}{'connect'} = 'file:/dev/null';
-		    #install packages
-		    my $drivertype = $printer->{currentqueue}{'model'};
-		    if ($drivertype eq 'Z22') {$drivertype = 'Z32';}
-		    if ($drivertype eq 'Z23') {$drivertype = 'Z33';}
-		    $drivertype = lc($drivertype);
-		    if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
-			eval { $in->do_pkgs->install("lexmark-drivers-$drivertype") };
-		    }
-		    if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
-			# Driver installation failed, probably we do not have
-			# the commercial CDs
-			$in->ask_warn(_("Lexmark inkjet configuration"),
-				      _("To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Go to the US site and click on the \"Drivers\" button. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."));
-		    }
-		}
-		$printer->{ARGS} = printer::read_foomatic_options($printer);
-		delete($printer->{SPECIAL_OPTIONS});
-	    }
-	} elsif ($printer->{currentqueue}{'ppd'}) { # CUPS+PPD queue?
-	    # If we had a Foomatic queue before, unmark the flag and initialize
-	    # the "printer" and "driver" fields
-	    $printer->{currentqueue}{'foomatic'} = 0;
-	    $printer->{currentqueue}{'printer'} = undef;
-	    $printer->{currentqueue}{'driver'} = "CUPS/PPD";
-	    # Now get the options from this PPD file
-	    if ($printer->{configured}{$queue}) {
-		# The queue was already configured
-		if ((!$printer->{DBENTRY}) || (!$oldchoice) ||
-		    ($printer->{DBENTRY} eq $oldchoice)) {
-		    # ... and the user didn't change the printer/driver
-		    $printer->{ARGS} = printer::read_cups_options($queue);
-		} else {
-		    # ... and the user has chosen another printer/driver
-		    $printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
-		}
-	    } else {
-		# The queue was not configured before
-		$printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
-	    }
-	}
-    }
-    1;
-}
-
-sub setup_options {
-    my ($printer, $in) = @_;
-    my @simple_options = 
-	("PageSize",        # Media properties
-	 "MediaType",
-	 "Form",
-	 "InputSlot",       # Trays
-	 "Tray",
-	 "OutBin",
-	 "OutputBin",
-	 "FaceUp",
-	 "FaceDown",
-	 "Collate",
-	 "Manual",
-	 "ManualFeed",
-	 "Manualfeed",
-	 "ManualFeeder",
-	 "Feeder",
-	 "Duplex",          # Double-sided printing
-	 "Binding",
-	 "Tumble",
-	 "DoubleSided",
-	 "Resolution",      # Resolution/Quality
-	 "GSResolution",
-	 "JCLResolution",
-	 "Quality",
-	 "PrintQuality",
-	 "PrintoutQuality",
-	 "QualityType",
-	 "ImageType",
-	 "stpImageType",
-	 "InkType",         # Colour/Gray/BW, 4-ink/6-ink
-	 "stpInkType",
-	 "Mode",
-	 "OutputMode",
-	 "OutputType",
-	 "ColorMode",
-	 "ColorModel",
-	 "PrintingMode",
-	 "Monochrome",
-	 "BlackOnly",
-	 "Grayscale",
-	 "GrayScale",
-	 "Colour",
-	 "Color",
-	 "Gamma",           # Lighter/Darker
-	 "GammaCorrection",
-	 "GammaGeneral",
-	 "MasterGamma",
-	 "StpGamma",
-	 "stpGamma",
-	 "EconoMode",       # Ink/Toner saving
-	 "Economode",
-	 "TonerSaving",
-	 "JCLEconomode",
-	 "HPNup",           # Other useful options
-	 "InstalledMemory", # Laser printer hardware config
-	 "Option1",
-	 "Option2",
-	 "Option3",
-	 "Option4",
-	 "Option5",
-	 "Option6",
-	 "Option7",
-	 "Option8",
-	 "Option9",
-	 "Option10",
-	 "Option11",
-	 "Option12",
-	 "Option13",
-	 "Option14",
-	 "Option15",
-	 "Option16",
-	 "Option17",
-	 "Option18",
-	 "Option19",
-	 "Option20",
-	 "Option21",
-	 "Option22",
-	 "Option23",
-	 "Option24",
-	 "Option25",
-	 "Option26",
-	 "Option27",
-	 "Option28",
-	 "Option29",
-	 "Option30"
-	 );
-    $in->set_help('setupOptions') if $::isInstall;
-    if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
-	($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
-	# Set up the widgets for the option dialog
-	my @widgets;
-	my @userinputs;
-	my @choicelists;
-	my @shortchoicelists;
-	my $i;
-	for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-	    my $optshortdefault = $printer->{ARGS}[$i]{'default'};
-	    if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
-		# enumerated option
-		push(@choicelists, []);
-		push(@shortchoicelists, []);
-		my $choice;
-		for $choice (@{$printer->{ARGS}[$i]{'vals'}}) {
-		    push(@{$choicelists[$i]}, $choice->{'comment'});
-		    push(@{$shortchoicelists[$i]}, $choice->{'value'});
-		    if ($choice->{'value'} eq $optshortdefault) {
-			push(@userinputs, $choice->{'comment'});
-		    }
-		}
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'}, 
-		       val => \$userinputs[$i], 
-		       not_edit => 1,
-		       list => \@{$choicelists[$i]},
-		       advanced => !member($printer->{ARGS}[$i]{'name'},
-					   @simple_options) });
-	    } elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
-		# boolean option
-		push(@choicelists, [$printer->{ARGS}[$i]{'name'}, 
-				    $printer->{ARGS}[$i]{'name_false'}]);
-		push(@shortchoicelists, []);
-		push(@userinputs, $choicelists[$i][1-$optshortdefault]);
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'},
-		       val => \$userinputs[$i],
-		       not_edit => 1,
-		       list => \@{$choicelists[$i]},
-		       advanced => !member($printer->{ARGS}[$i]{'name'},
-					   @simple_options) });
-	    } else {
-		# numerical option
-		push(@choicelists, []);
-		push(@shortchoicelists, []);
-		push(@userinputs, $optshortdefault);
-		push(@widgets,
-		     { label => $printer->{ARGS}[$i]{'comment'} . 
-			   " ($printer->{ARGS}[$i]{'min'}... " .
-			       "$printer->{ARGS}[$i]{'max'})",
-			   #type => 'range',
-			   #min => $printer->{ARGS}[$i]{'min'},
-			   #max => $printer->{ARGS}[$i]{'max'},
-			   val => \$userinputs[$i],
-			   advanced => !member($printer->{ARGS}[$i]{'name'},
-					       @simple_options) });
-	    }
-	}
-	# Show the options dialog. The call-back function does a
-	# range check of the numerical options.
-	my $windowtitle = "$printer->{currentqueue}{'make'} $printer->{currentqueue}{'model'}";
-	if ($::expert) {
-	    my $driver = undef;
-	    if ($driver = $printer->{currentqueue}{driver}) {
-		if ($printer->{currentqueue}{foomatic}) {
-		    if ($driver eq 'Postscript') {
-			$driver = "PostScript";
-		    } else {
-			$driver = "GhostScript + $driver";
-		    }
-		} elsif ($printer->{currentqueue}{ppd}) {
-		    if ($printer->{DBENTRY}) {
-			$printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/;
-			$driver = $1;
-		    } else {
-			$driver = printer::get_descr_from_ppd($printer);
-			if ($driver =~ /^[^\|]*\|[^\|]*$/) { # No driver info
-			    $driver = "CUPS/PPD";
-			} else {
-			    $driver =~ /^[^\|]*\|[^\|]*\|(.*)$/;
-			    $driver = $1;
-			}
-		    }
-		}
-	    } 
-	    if ($driver) {
-		$windowtitle .= ", $driver";
-	    }
-	}
-	# Do not show the options setup dialog when installing a new printer
-	# in recommended mode without "Manual configuration" turned on.
-	if ((!$printer->{NEW}) or ($::expert) or ($printer->{MANUAL})) {
-	    return 0 if !$in->ask_from
-		($windowtitle,
-		 _("Printer default settings
-
-You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."),
-		 \@widgets,
-		 complete => sub {
-		     my $i;
-		     for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-			 if (($printer->{ARGS}[$i]{'type'} eq 'int') || ($printer->{ARGS}[$i]{'type'} eq 'float')) {
-			     unless (($printer->{ARGS}[$i]{'type'} ne 'int') || ($userinputs[$i] =~ /^[\-\+]?[0-9]+$/)) {
-				 $in->ask_warn('', _("Option %s must be an integer number!", $printer->{ARGS}[$i]{'comment'}));
-				 return (1, $i);
-			     }
-			     unless (($printer->{ARGS}[$i]{'type'} ne 'float') || ($userinputs[$i] =~ /^[\-\+]?[0-9\.]+$/)) {
-				 $in->ask_warn('', _("Option %s must be a number!", $printer->{ARGS}[$i]{'comment'}));
-				 return (1, $i);
-			     }
-			     unless (($userinputs[$i] >= $printer->{ARGS}[$i]{'min'}) &&
-				     ($userinputs[$i] <= $printer->{ARGS}[$i]{'max'})) {
-				 $in->ask_warn('', _("Option %s out of range!", $printer->{ARGS}[$i]{'comment'}));
-				 return (1, $i);
-			     }
-			 }
-		     }
-		     return (0);
-		 } );
-	}
-	# Read out the user's choices and generate the appropriate command
-	# line arguments
-	@{$printer->{currentqueue}{options}} = ();
-	for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-	    push(@{$printer->{currentqueue}{options}}, "-o");
-	    if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
-		# enumerated option
-		my $j;
-		for ($j = 0; $j <= $#{$choicelists[$i]}; $j++) {
-		    if ($choicelists[$i][$j] eq $userinputs[$i]) {
-			push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=". $shortchoicelists[$i][$j]);
-		    }
-		}
-	    } elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
-		# boolean option
-		push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=".
-		     (($choicelists[$i][0] eq $userinputs[$i]) ? "1" : "0"));
-	    } else {
-		# numerical option
-		push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=" . $userinputs[$i]);
-	    }
-	}
-    }
-    1;
-}
-
-sub setasdefault {
-    my ($printer, $in) = @_;
-    $in->set_help('setupAsDefault') if $::isInstall;
-    if (($printer->{DEFAULT} eq '') || # We have no default printer,
-	                               # so set the current one as default
-	($in->ask_yesorno('', _("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 0))) { # Ask the user
-	$printer->{DEFAULT} = $printer->{QUEUE};
-        printer::set_default_printer($printer);
-    }
-}
-	
-sub print_testpages {
-    my ($printer, $in, $upNetwork) = @_;
-    $in->set_help('printTestPages') if $::isInstall;
-    # print test pages
-    my $standard = 1;
-    my $altletter = 0;
-    my $alta4 = 0;
-    my $photo = 0;
-    my $ascii = 0;
-    my $res2 = 0;
-    my $res1 = $in->ask_from_
-	({ title => _("Test pages"),
-	   messages => _("Please select the test pages you want to print.
-Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."),
-          cancel => ((!$printer->{NEW}) ?
-		     _("Cancel") : ($::isWizard ? _("<- Previous") : 
-				    _("No test pages"))),
-          ok => ($::isWizard ? _("Next ->") : _("Print"))},
-	 [
-	  { text => _("Standard test page"), type => 'bool',
-	    val => \$standard },
-	  ($::expert ?
-	   { text => _("Alternative test page (Letter)"), type => 'bool', 
-	     val => \$altletter } : ()),
-	  ($::expert ?
-	   { text => _("Alternative test page (A4)"), type => 'bool', 
-	     val => \$alta4 } : ()), 
-	  { text => _("Photo test page"), type => 'bool', val => \$photo },
-	  #{ text => _("Plain text test page"), type => 'bool',
-	  #  val => \$ascii }
-	  ($::isWizard ?
-	   { text => _("Do not print any test page"), type => 'bool', 
-	     val => \$res2 } : ())
-	  ]);
-    $res2 = 1 if (!($standard || $altletter || $alta4 || $photo ||
-		    $ascii));
-    if ($res1 && !$res2) {
-	my @lpq_output;
-	{
-	    my $w = $in->wait_message('', _("Printing test page(s)..."));
-	    
-	    $upNetwork and do { &$upNetwork(); undef $upNetwork; sleep(1) };
-	    my $stdtestpage = "/usr/share/printer-testpages/testprint.ps";
-	    my $altlttestpage = "/usr/share/printer-testpages/testpage.ps";
-	    my $alta4testpage = "/usr/share/printer-testpages/testpage-a4.ps";
-	    my $phototestpage = "/usr/share/printer-testpages/photo-testpage.jpg";
-	    my $asciitestpage = "/usr/share/printer-testpages/testpage.asc";
-	    my @testpages;
-	    # Install the filter to convert the photo test page to PS
-	    if (($photo) && (!$::testing) &&
-		(!printer::files_exist((qw(/usr/bin/convert))))) {
-		$in->do_pkgs->install('ImageMagick');
-	    }
-	    # set up list of pages to print
-	    $standard && push (@testpages, $stdtestpage);
-	    $altletter && push (@testpages, $altlttestpage);
-	    $alta4 && push (@testpages, $alta4testpage);
-	    $photo && push (@testpages, $phototestpage);
-	    $ascii && push (@testpages, $asciitestpage);
-	    # print the stuff
-	    @lpq_output = printer::print_pages($printer, @testpages);
-	}
-	my $dialogtext;
-	if (@lpq_output) {
-	    $dialogtext = _("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.
-Printing status:\n%s\n\n", @lpq_output);
-	} else {
-	    $dialogtext = _("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.\n");
-	}
-	if ($printer->{NEW} == 0) {
-	    $in->ask_warn('',$dialogtext);
-	    return 1;
-	} else {
-	    $in->ask_yesorno('',$dialogtext . _("Did it work properly?"), 1) 
-		and return 1;
-	}
-    } else {
-	return ($::isWizard ? $res1 : 1) ;
-    }
-    return 2;
-}
-
-sub printer_help {
-    my ($printer, $in) = @_;
-    my $spooler = $printer->{SPOOLER};
-    my $queue = $printer->{QUEUE};
-    my $default = $printer->{DEFAULT};
-    my $raw = 0;
-    my $cupsremote = 0;
-    my $scanning = "";
-    if ($printer->{configured}{$queue}) {
-	if (($printer->{configured}{$queue}{'queuedata'}{'model'} eq
-	     _("Unknown model")) ||
-	    ($printer->{configured}{$queue}{'queuedata'}{'model'} eq
-	     _("Raw printer"))) {
-	    $raw = 1;
-	}
-	# Information about scanning with HP's multi-function devices
-	$scanning = scanner_help
-	    ($printer->{configured}{$queue}{'queuedata'}{'make'} . " " .
-	     $printer->{configured}{$queue}{'queuedata'}{'model'}, 
-	     $printer->{configured}{$queue}{'queuedata'}{'connect'});
-	if ($scanning) {
-	    $scanning = "\n\n$scanning\n\n";
-	}
-    } else {
-	$cupsremote = 1;
-    }
-
-    my $dialogtext;
-    if ($spooler eq "cups") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-(!$cupsremote ?
- _("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s
-
-", $scanning) . printer::lphelp_output($printer) : $scanning .
- _("Here is a list of the available printing options for the current printer:
-
-") . printer::lphelp_output($printer)) : $scanning);
-    } elsif ($spooler eq "lprng") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) . 
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -Z option=setting -Z switch" : "lpr -Z option=setting -Z switch")) .
-_("To get a list of the options available for the current printer click on the \"Print option list\" button." . $scanning) : $scanning);
-    } elsif ($spooler eq "lpd") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-_("To get a list of the options available for the current printer click on the \"Print option list\" button." . $scanning) : $scanning);
-    } elsif ($spooler eq "pdq") {
-	$dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".
-", ($queue ne $default ? "pdq -P $queue" : "pdq"), ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-_("You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.
-If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
-") .
-(!$raw ?
-_("
-The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".
-", "pdq", "lpr", ($queue ne $default ? "pdq -P $queue -aoption=setting -oswitch" : "pdq -aoption=setting -oswitch")) .
-_("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s
-
-", $scanning) . printer::pdqhelp_output($printer) : $scanning);
-    }
-    if (!$raw && !$cupsremote) {
-        my $choice;
-        while ($choice ne _("Close")) {
-	    $choice = $in->ask_from_list_
-	        (($scanning ?
-		  _("Printing/Scanning on \"%s\"", $queue) :
-		  _("Printing on the printer \"%s\"", $queue)),
-		 $dialogtext,
-		 [ _("Print option list"), _("Close") ],
-		 _("Close"));
-	    if ($choice ne _("Close")) {
-		my $w = $in->wait_message('', _("Printing test page(s)..."));
-	        printer::print_optionlist($printer);
-	    }
-	}
-    } else {
-	$in->ask_warn(($scanning ?
-		       _("Printing/Scanning on \"%s\"", $queue) :
-		       _("Printing on the printer \"%s\"", $queue)), 
-		      $dialogtext);
-    }
-}
-
-sub scanner_help {
-    my ($makemodel, $deviceuri) = @_;
-    if ($deviceuri =~ m!^ptal:/(.*)$!) {
-	my $ptaldevice = $1;
-	if (($makemodel =~ /HP\s+OfficeJet\s+[KVRGPD]/i) ||
-	    ($makemodel =~ /HP\s+PSC\s+[579]/i)) {
-	    # SANE-driven models
-	    return _("Your HP multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line to get more information.
-
-Do not use \"scannerdrake\" for this device!",
-		     $ptaldevice);
-	} elsif (($makemodel !~ /HP\s+PhotoSmart/i) &&
-		 ($makemodel !~ /HP\s+LaserJet\s+2200/i)) {
-	    # "ptal-hp"-driven models
-	    return _("Your HP multi-function device was configured automatically to be able to scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". Scanning via a graphical interface or from the GIMP is not supported yet for your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or 1200 you can only scan when you have the scanner option installed.
-
-Do not use \"scannerdrake\" for this device!",
-		     $ptaldevice);
-	} else {
-	    return "";
-	}
-    }
-}
-
-sub copy_queues_from {
-    my ($printer, $in, $oldspooler) = @_;
-
-    $in->set_help('copyQueues') if $::isInstall;
-    my $newspooler = $printer->{SPOOLER};
-    my @oldqueues;
-    my @queueentries;
-    my @queuesselected;
-    my $newspoolerstr;
-    my $oldspoolerstr;
-    my $noninteractive = 0;
-    {
-	my $w = $in->wait_message('', _("Reading printer data..."));
-	@oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
-	@oldqueues = sort(@oldqueues);
-	$newspoolerstr = $printer::shortspooler_inv{$newspooler};
-	$oldspoolerstr = $printer::shortspooler_inv{$oldspooler};
-	for (@oldqueues) {
-	    push (@queuesselected, 1);
-	    push (@queueentries, { text => $_, type => 'bool', 
-				   val => \$queuesselected[$#queuesselected] });
-	}
-	# LPRng and LPD use the same config files, therefore one sees the 
-	# queues of LPD when one uses LPRng and vice versa, but these queues
-	# do not work. So automatically transfer all queues when switching
-	# between LPD and LPRng.
-	if (($oldspooler =~ /^lp/) && ($newspooler =~ /^lp/)) {
-	    $noninteractive = 1;
-	}
-    }
-    if ($noninteractive ||
-	$in->ask_from_
-	({ title => _("Transfer printer configuration"),
-	   messages => _("You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
-Not all queues can be transferred due to the following reasons:
-", $oldspoolerstr, $newspoolerstr) .
-($newspooler eq "cups" ? _("CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
-") :
- ($newspooler eq "pdq" ? _("PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
-") :
-  _("LPD and LPRng do not support IPP printers.
-"))) .
-_("In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred.") .
-($oldspooler eq "cups" ? _("
-Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.") : ()) . _("
-Mark the printers which you want to transfer and click 
-\"Transfer\"."),
-	   cancel => _("Do not transfer printers"),
-           ok => _("Transfer")
-	 },
-         \@queueentries
-      )) {
-	my $queuecopied = 0;
-	for (@oldqueues) {
-	    if (shift(@queuesselected)) {
-                my $oldqueue = $_;
-                my $newqueue = $_;
-                if ((!$printer->{configured}{$newqueue}) ||
-		    ($noninteractive) ||
-		    ($in->ask_from_
-	             ({ title => _("Transfer printer configuration"),
-	                messages => _("A printer named \"%s\" already exists under %s. 
-Click \"Transfer\" to overwrite it.
-You can also type a new name or skip this printer.", 
-				      $newqueue, $newspoolerstr),
-                        ok => _("Transfer"),
-                        cancel => _("Skip"),
-		        callbacks => { complete => sub {
-	                    unless ($newqueue =~ /^\w+$/) {
-				$in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
-				return (1,0);
-			    }
-			    if (($printer->{configured}{$newqueue})
-				&& ($newqueue ne $oldqueue) && 
-				(!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
-							 $newqueue),
-						   0))) {
-				return (1,0); # Let the user correct the name
-			    }
-			    return 0;
-			}}
-		    },
-		      [{label => _("New printer name"),val => \$newqueue}]))) {
-		    {
-			my $w = $in->wait_message('', 
-			   _("Transferring %s...", $oldqueue));
-		        printer::copy_foomatic_queue($printer, $oldqueue,
-						   $oldspooler, $newqueue) and
-							 $queuecopied = 1;
-		    }
-		    if ($oldqueue eq $printer->{DEFAULT}) {
-			# Make the former default printer the new default
-			# printer if the user does not reject
-			if (($noninteractive) ||
-			    ($in->ask_yesorno
-			     (_("Transfer printer configuration"),
-			      _("You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?", $oldqueue, $newspoolerstr), 1))) {
-			    $printer->{DEFAULT} = $newqueue;
-			    printer::set_default_printer($printer);
-			}
-		    }
-		}
-            }
-	}
-        if ($queuecopied) {
-	    my $w = $in->wait_message('', _("Refreshing printer data..."));
-	    printer::read_configured_queues($printer);
-        }
-    }
-}
-
-sub start_network {
-    my ($in, $upNetwork) = @_;
-    my $w = $in->wait_message(_("Configuration of a remote printer"), 
-			      _("Starting network..."));
-    if ($::isInstall) {
-	return ($upNetwork and 
-		do { my $ret = &$upNetwork(); 
-		     undef $upNetwork; 
-		     sleep(1);
-		     $ret});
-    } else {
-	return printer::start_service("network");
-    }
-}
-
-sub check_network {
-
-    # This routine is called whenever the user tries to configure a remote
-    # printer. It checks the state of the network functionality to assure
-    # that the network is up and running so that the remote printer is
-    # reachable.
-
-    my ($printer, $in, $upNetwork) = @_;
-
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-    $in->set_help('checkNetwork') if $::isInstall;
-
-    # First check: Does /etc/sysconfig/network-scripts/draknet_conf exist
-    # (otherwise the network is not configured yet and draknet has to be
-    # started)
-
-    if (!printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
-	my $go_on = 0;
-	while (!$go_on) {
-	    my $choice = _("Configure the network now");
-	    if ($in->ask_from(_("Network functionality not configured"),
-			      _("You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"),
-			      [ { val => \$choice, type => 'list',
-				  list => [ _("Configure the network now"),
-					    _("Go on without configuring the network") ]} ] )) {
-		if ($choice eq _("Configure the network now")){
-		    if ($::isInstall) {
-			require network::netconnect;
-		        network::netconnect::main
-			    ($in->{prefix}, $in->{netcnx} ||= {}, 
-			     $in->{netc}, $in->{mouse}, $in, 
-			     $in->{intf}, 0,
-			     $in->{lang} eq "fr_FR" && 
-			     $in->{keyboard} eq "fr", 0);
-		    } else {
-			system("/usr/sbin/draknet");
-		    }
-		    if (printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
-			$go_on = 1;
-		    }
-		} else {
-		    return 1;
-		}
-	    } else {
-		return 0;
-	    }
-	}
-    }
-
-    # Second check: Is the network running?
-
-    if (printer::network_running()) {return 1;}
-
-    # The network is configured now, start it.
-    if (!start_network($in, $upNetwork)) {
-	$in->ask_warn(_("Configuration of a remote printer"), 
-($::isInstall ?
-_("The network configuration done during the installation cannot be started now. Please check whether the network gets accessable after booting your system and correct the configuration using the Mandrake Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the Mandrake Control Center, section \"Hardware\"/\"Printer\"") :
-_("The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.")));
-	return 0;
-    }
-
-    # Give a SIGHUP to the daemon and in case of CUPS do also the
-    # automatic configuration of broadcasting/access permissions
-    # The daemon is not really restarted but only SIGHUPped to not
-    # interrupt print jobs.
-
-    my $w = $in->wait_message(_("Configuration of a remote printer"), 
-			      _("Restarting printing system..."));
-
-    return printer::SIGHUP_daemon($printer->{SPOOLER});
-
-}
-
-sub security_check {
-    # Check the security mode and when in "high" or "paranoid" mode ask the
-    # user whether he really wants to configure printing.
-    my ($printer, $in, $spooler) = @_;
-
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-    $in->set_help('securityCheck') if $::isInstall;
-
-    # Get security level
-    my $security = undef;
-    if ($::isInstall) {
-	$security = $in->{'security'};
-    } else {
-	$security = printer::get_security_level();
-    }
-
-    # Exit silently if the spooler is PDQ
-    if ($spooler eq "pdq") {return 1;}
-
-    # Exit silently in medium or lower security levels
-    if ((!$security) || ($security < 4)) {return 1;}
-    
-    # Exit silently if the current spooler is already activated for the current
-    # security level
-    if (printer::spooler_in_security_level($spooler, $security)) {return 1;}
-
-    # Tell user in which security mode he is and ask him whether he really
-    # wants to activate the spooler in the given security mode. Stop the
-    # operation of installing the spooler if he disagrees.
-    my $securitystr = ($security == 4 ? _("high") : _("paranoid"));
-    if ($in->ask_yesorno(_("Installing a printing system in the %s security level", $securitystr),
-			 _("You are about to install the printing system %s on a system running in the %s security level.
-
-This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
-
-Do you really want to configure printing on this machine?",
-			   $printer::shortspooler_inv{$spooler},
-			   $securitystr))) {
-        printer::add_spooler_to_security_level($spooler, $security);
-	my $service;
-	if (($spooler eq "lpr") || ($spooler eq "lprng")) {
-	    $service = "lpd";
-	} else {
-	    $service = $spooler;
-	}
-        printer::start_service_on_boot($service);
-	return 1;
-    } else {
-	return 0;
-    }
-}
-
-sub start_spooler_on_boot {
-    # Checks whether the spooler will be started at boot time and if not,
-    # ask the user whether he wants to start the spooler at boot time.
-    my ($printer, $in, $service) = @_;
-
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-    $in->set_help('startSpoolerOnBoot') if $::isInstall;
-    if (!printer::service_starts_on_boot($service)) {
-	if ($in->ask_yesorno(_("Starting the printing system at boot time"),
-			     _("The printing system (%s) will not be started automatically when the machine is booted.
-
-It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
-
-Do you want to have the automatic starting of the printing system turned on again?",
-		       $printer::shortspooler_inv{$printer->{SPOOLER}}))) {
-	    printer::start_service_on_boot($service);
-	}
-    }
-    1;
-}
-
-sub install_spooler {
-    # installs the default spooler and start its daemon
-    my ($printer, $in, $upNetwork) = @_;
-    if (!$::testing) {
-	# If the user refuses to install the spooler in high or paranoid
-	# security level, exit.
-	if (!security_check($printer, $in, $printer->{SPOOLER})) {
-	    return 0;
-	}
-	if ($printer->{SPOOLER} eq "cups") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/lib/cups/cgi-bin/printers.cgi
-					       /sbin/ifconfig
-					       /usr/bin/xpp
-					       /usr/bin/curl),
-					    ($::expert ? 
-					     "/usr/share/cups/model/postscript.ppd.gz" : ())
-					    )))) {
-		    $in->do_pkgs->install(('cups', 'net-tools', 'xpp',
-					   'curl',
-					   ($::expert ? 'cups-drivers' : ())));
-		}
-		# Try to start the network when CUPS is the spooler, so that
-		# remote CUPS printers get displayed (especially during
-		# installation)
-		$upNetwork and do {
-		    &$upNetwork(); 
-		    undef $upNetwork; 
-		    sleep(1);
-		};
-		# Start daemon
-	        printer::start_service("cups");
-		# Set the CUPS tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-cups");
-	        printer::set_alternative("lpq","/usr/bin/lpq-cups");
-	        printer::set_alternative("lprm","/usr/bin/lprm-cups");
-	        printer::set_alternative("lp","/usr/bin/lp-cups");
-	        printer::set_alternative("cancel","/usr/bin/cancel-cups");
-	        printer::set_alternative("lpstat","/usr/bin/lpstat-cups");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-cups");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "cups");
-	} elsif ($printer->{SPOOLER} eq "lpd") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		# "lpr" conflicts with "LPRng", remove "LPRng"
-		if ((!$::testing) &&
-		    (printer::files_exist((qw(/usr/lib/filters/lpf))))) {
-		    my $w = $in->wait_message('', _("Removing LPRng..."));
-		    $in->do_pkgs->remove_nodeps('LPRng');
-		}
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/sbin/lpf
-					       /usr/sbin/lpd
-					       /sbin/ifconfig
-					       /usr/bin/gpr
-					       /usr/bin/a2ps
-					       /usr/bin/convert))))) {
-		    $in->do_pkgs->install(('lpr', 'net-tools', 'gpr', 'a2ps', 'ImageMagick'));
-		}
-		# Start daemon
-	        printer::restart_service("lpd");
-		# Set the LPD tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-lpd");
-	        printer::set_alternative("lpq","/usr/bin/lpq-lpd");
-	        printer::set_alternative("lprm","/usr/bin/lprm-lpd");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "lpd");
-	} elsif ($printer->{SPOOLER} eq "lprng") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		# "LPRng" conflicts with "lpr", remove "lpr"
-		if ((!$::testing) &&
-		    (printer::files_exist((qw(/usr/sbin/lpf))))) {
-		    my $w = $in->wait_message('', _("Removing LPD..."));
-		    $in->do_pkgs->remove_nodeps('lpr');
-		}
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/lib/filters/lpf
-					       /usr/sbin/lpd
-					       /sbin/ifconfig
-					       /usr/bin/gpr
-					       /usr/bin/a2ps
-					       /usr/bin/convert))))) {
-		    $in->do_pkgs->install('LPRng', 'net-tools', 'gpr', 'a2ps', 'ImageMagick');
-		}
-		# Start daemon
-	        printer::restart_service("lpd");
-		# Set the LPRng tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-lpd");
-	        printer::set_alternative("lpq","/usr/bin/lpq-lpd");
-	        printer::set_alternative("lprm","/usr/bin/lprm-lpd");
-	        printer::set_alternative("lp","/usr/bin/lp-lpd");
-	        printer::set_alternative("cancel","/usr/bin/cancel-lpd");
-	        printer::set_alternative("lpstat","/usr/bin/lpstat-lpd");
-	        printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
-		# Remove PDQ panic buttons from the user's KDE Desktops
-	        printer::pdq_panic_button("remove");
-	    }
-	    # Should it be started at boot time?
-	    start_spooler_on_boot($printer, $in, "lpd");
-	} elsif ($printer->{SPOOLER} eq "pdq") {
-	    {
-		my $w = $in->wait_message('', _("Checking installed software..."));
-		if ((!$::testing) &&
-		    (!printer::files_exist((qw(/usr/bin/pdq
-					       /usr/X11R6/bin/xpdq))))) {
-		    $in->do_pkgs->install('pdq');
-		}
-		# PDQ has no daemon, so nothing needs to be started
-		
-		# Set the PDQ tools as defaults for "lpr", "lpq", "lprm", ...
-	        printer::set_alternative("lpr","/usr/bin/lpr-pdq");
-	        printer::set_alternative("lpq","/usr/bin/lpq-foomatic");
-	        printer::set_alternative("lprm","/usr/bin/lprm-foomatic");
-		# Add PDQ panic buttons to the user's KDE Desktops
-	        printer::pdq_panic_button("add");
-	    }
-	}
-	# Give a SIGHUP to the devfsd daemon to correct the permissions
-	# for the /dev/... files according to the spooler
-	printer::SIGHUP_daemon("devfs");
-    }
-    1;
-}
-
-sub setup_default_spooler {
-    my ($printer, $in, $upNetwork) = @_;
-    $in->set_help('setupDefaultSpooler') if $::isInstall;
-    $printer->{SPOOLER} ||= 'cups';
-    my $oldspooler = $printer->{SPOOLER};
-    my $str_spooler = 
-	$in->ask_from_list_(_("Select Printer Spooler"),
-			    _("Which printing system (spooler) do you want to use?"),
-			    [ printer::spooler() ],
-			    $printer::spooler_inv{$printer->{SPOOLER}},
-			    ) or return;
-    $printer->{SPOOLER} = $printer::spooler{$str_spooler};
-    # Install the spooler if not done yet
-    if (!install_spooler($printer, $in, $upNetwork)) {
-	$printer->{SPOOLER} = $oldspooler;
-	return;
-    }
-    if ($printer->{SPOOLER} ne $oldspooler) {
-	# Remove the local printers from Star Office/OpenOffice.org
-	printer::removelocalprintersfromapplications($printer);
-	# Get the queues of this spooler
-	{
-	    my $w = $in->wait_message('', _("Reading printer data..."));
-	    printer::read_configured_queues($printer);
-	}
-	# Copy queues from former spooler
-	copy_queues_from($printer, $in, $oldspooler);
-	# Re-read the printer database (CUPS has additional drivers, PDQ
-	# has no raw queue)
-	%printer::thedb = ();
-	#my $w = $in->wait_message('', _("Reading printer database..."));
-	#printer::read_printer_db($printer->{SPOOLER});
-    }
-    # Save spooler choice
-    printer::set_default_spooler($printer);
-    return $printer->{SPOOLER};
-}
-
-sub configure_queue {
-    my ($printer, $in) = @_;
-    my $w = $in->wait_message('', _("Configuring printer \"%s\"...",
-				    $printer->{currentqueue}{queue}));
-    $printer->{complete} = 1;
-    printer::configure_queue($printer);
-    $printer->{complete} = 0;
-}
-
-sub install_foomatic {
-    my ($in) = @_;
-    if ((!$::testing) &&
-	(!printer::files_exist((qw(/usr/bin/foomatic-configure
-				       /usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm)
-				    )))) {
-	my $w = $in->wait_message('', _("Installing Foomatic..."));
-	$in->do_pkgs->install('foomatic');
-    }
-}
-
-sub wizard_close {
-    my ($in, $mode) = @_;
-    # Leave wizard mode with congratulations screen if $mode = 1
-    $::Wizard_no_previous = 1;
-    $::Wizard_no_cancel = 1;
-    $::Wizard_finished = 1;
-    wizard_congratulations($in) if ($mode == 1);
-    undef $::isWizard;
-    $::WizardWindow->destroy if defined $::WizardWindow;
-    undef $::WizardWindow;
-};
-
-#- Program entry point for configuration of the printing system.
-sub main {
-    my ($printer, $in, $ask_multiple_printer, $upNetwork) = @_;
-
-    # Default printer name, we do not use "lp" so that one can switch the
-    # default printer under LPD without needing to rename another printer.
-    # Under LPD the alias "lp" will be given to the default printer.
-    my $defaultprname = _("Printer");
-
-    # printerdrake does not work without foomatic, and for more convenience
-    # we install some more stuff
-    {
-	my $w = $in->wait_message('', _("Checking installed software..."));
-	if ((!$::testing) &&
-	    (!printer::files_exist((qw(/usr/bin/foomatic-configure
-				       /usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm
-				       /usr/bin/escputil
-				       /usr/share/printer-testpages/testprint.ps
-				       ),
-				    (printer::files_exist("/usr/bin/gimp") ?
-				     "/usr/lib/gimp/1.2/plug-ins/print" : ())
-				    )))) {
-	    $in->do_pkgs->install('foomatic','printer-utils','printer-testpages',
-				  if_($in->do_pkgs->is_installed('gimp'), 'gimpprint'));
-	}
-
-	# only experts should be asked for the spooler
-	!$::expert and $printer->{SPOOLER} ||= 'cups';
-
-    }
-
-    # If we have chosen a spooler, install it and mark it as default spooler
-    if (($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '')) {
-	if (!install_spooler($printer, $in, $upNetwork)) {return;}
-        printer::set_default_spooler($printer);
-    }
-
-    # Control variables for the main loop
-    my ($menuchoice, $cursorpos, $queue, $continue, $newqueue, $editqueue, $expertswitch, $menushown) = ('', '::', $defaultprname, 1, 0, 0, 0, 0);
-    # Cursor position in queue modification window
-    my $modify = _("Printer options");
-    while ($continue) {
-	$newqueue = 0;
-	# When the queue list is not shown, cancelling the printer type
-	# dialog should leave the program
-	$continue = 0;
-	# Get the default printer
-	if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '') &&
-	    ((!defined($printer->{DEFAULT})) || ($printer->{DEFAULT} eq ''))) {
-	    my $w = $in->wait_message('', _("Preparing PrinterDrake..."));
-	    $printer->{DEFAULT} = printer::get_default_printer($printer);
-	    if ($printer->{DEFAULT}) {
-		# If a CUPS system has only remote printers and no default
-		# printer defined, it defines the first printer whose
-		# broadcast signal appeared after the start of the CUPS
-		# daemon, so on every start another printer gets the default
-		# printer. To avoid this, make sure that the default printer
-		# is defined.
-		printer::set_default_printer($printer);
-	    } else {
-		$printer->{DEFAULT} = '';
-	    }
-	}
-
-	# Configure the current printer queues in applications
-	{
-	    my $w = $in->wait_message('', _("Configuring applications..."));
-	    printer::configureapplications($printer);
-	}
-
-	if ($editqueue) {
-	    # The user was either in the printer modification dialog and did
-	    # not close it or he had set up a new queue and said that the test
-	    # page didn't come out correctly, so let the user edit the queue.
-	    $newqueue = 0;
-	    $continue = 1;
-	    $editqueue = 0;
-	} else {
-	    # Reset modification window cursor when one leaves the window
-	    $modify = _("Printer options");
-	    if (!$ask_multiple_printer && 
-		%{$printer->{configured} || {}} == ()) {
-		$in->set_help('doYouWantToPrint') if $::isInstall;
-		$newqueue = 1;
-		$menuchoice = $printer->{want} || 
-		    $in->ask_yesorno(_("Printer"),
-				    _("Would you like to configure printing?"),
-				    0) ? "\@addprinter" : "\@quit";
-		if ($menuchoice ne "\@quit") {
-		    $printer->{SPOOLER} ||= 
-			setup_default_spooler ($printer, $in, $upNetwork) ||
-			    return;
-		}
-	    } else {
-		# Ask for a spooler when none is defined
-		$printer->{SPOOLER} ||=  setup_default_spooler ($printer, $in, $upNetwork) || return;
-		# This entry and the check for this entry have to use
-		# the same translation to work properly
-		my $spoolerentry = _("Printing system: ");
-		# Show a queue list window when there is at least one queue,
-		# when we are in expert mode, or when we are not in the
-		# installation.
-		unless ((!%{$printer->{configured} || {}}) && 
-			(!$::expert) && ($::isInstall)) {
-		    $in->set_help('mainMenu') if $::isInstall;
-		    # Cancelling the printer type dialog should leed to this
-		    # dialog
-		    $continue = 1;
-		    # This is for the "Recommended" installation. When one has
-		    # no printer queue printerdrake starts directly adding
-		    # a printer and in the end it asks whether one wants to
-		    # install another printer. If the user says "Yes", he
-		    # arrives in the main menu of printerdrake. From now
-		    # on the question is not asked any more but the menu
-		    # is shown directly after having done an operation.
-		    $menushown = 1;
-		    # Initialize the cursor position
-		    if (($cursorpos eq "::") && 
-			($printer->{DEFAULT}) &&
-			($printer->{DEFAULT} ne "")) {
-			if ($printer->{configured}{$printer->{DEFAULT}}) {
-			    $cursorpos = 
-				$printer->{configured}{$printer->{DEFAULT}}{'queuedata'}{'menuentry'} . _(" (Default)");
-			} elsif ($printer->{SPOOLER} eq "cups") {
-			    ($cursorpos) = 
-				grep { $_ =~ /!$printer->{DEFAULT}:[^!]*$/ }
-			    printer::get_cups_remote_queues($printer);
-			}
-		    }
-		    # Generate the list of available printers
-		    my @printerlist = 
-			( (sort((map {$printer->{configured}{$_}{'queuedata'}{'menuentry'} 
-				      . ($_ eq $printer->{DEFAULT} ?
-					 _(" (Default)") : (""))}
-				 keys(%{$printer->{configured}
-					|| {}})),
-				($printer->{SPOOLER} eq "cups" ?
-				 printer::get_cups_remote_queues($printer)
-				 : ())))
-			  );
-		    my $noprinters = ($#printerlist < 0);
-		    # Position the cursor where it were before (in case
-		    # a button was pressed).
-		    $menuchoice = $cursorpos;
-		    # Show the main dialog
-		    $in->ask_from_(
-			{title => _("Printerdrake"),
-			 messages =>
-			     ($noprinters ? "" :
-			      (($printer->{SPOOLER} eq "cups") ?
-			       _("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; to view information about it; or to make a printer on a remote CUPS server available for Star Office/OpenOffice.org.") :
-			       _("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it."))),
-			 cancel => (""),
-			 ok => (""),
-			},
-			# List the queues
-			[ ($noprinters ? () :
-			   { val => \$menuchoice, format => \&translate,
-			     sort => 0, separator => "!",tree_expanded => 1,
-			     quit_if_double_click => 1,allow_empty_list =>1,
-			     list => \@printerlist }),
-			  { clicked_may_quit =>
-			    sub { 
-				# Save the cursor position
-				$cursorpos = $menuchoice;
-				$menuchoice = "\@addprinter";
-				1; 
-			    },
-			    val => _("Add a new printer") },
-			  ( $printer->{SPOOLER} eq "cups" ?
-			    ({ clicked_may_quit =>
-				   sub { 
-				       # Save the cursor position
-				       $cursorpos = $menuchoice;
-				       $menuchoice = "\@refresh";
-				       1;
-				   },
-			       val => _("Refresh printer list (to display all available remote CUPS printers)") },
-			     { clicked_may_quit =>
-				   sub { 
-				       # Save the cursor position
-				       $cursorpos = $menuchoice;
-				       $menuchoice = "\@cupsconfig";
-				       1;
-				   },
-			       val => ($::expert ? _("CUPS configuration") :
-				       _("Specify CUPS server")) }) : ()),
-			  ( $::expert ?
-			    { clicked_may_quit =>
-				  sub {
-				      # Save the cursor position
-				      $cursorpos = $menuchoice;
-				      $menuchoice = "\@spooler";
-				      1;
-				  },
-				  val => _("Change the printing system") } :
-			    ()),
-			  ( !$::isInstall ?
-			    { clicked_may_quit =>
-				  sub { $menuchoice = "\@usermode"; 1; },
-				  val => ($::expert ? _("Normal Mode") :
-					  _("Expert Mode")) } : ()),
-			  { clicked_may_quit =>
-			    sub { $menuchoice = "\@quit"; 1; },
-			    val => _("Quit") },
-			  ]
-		    );
-		    # Toggle expert mode and standard mode
-		    if ($menuchoice eq "\@usermode") {
-			$::expert = !$::expert;
-			# Read printer database for the new user mode
-			%printer::thedb = ();
-			#my $w = $in->wait_message('', _("Reading printer database..."));
-		        #printer::read_printer_db($printer->{SPOOLER});
-			# Re-read printer queues to switch the tree
-			# structure between expert/normal mode.
-			my $w = $in->wait_message('', _("Reading printer data..."));
-			printer::read_configured_queues($printer);
-			$cursorpos = "::";
-			next;
-		    }
-		} else {
-		    #- as there are no printer already configured, Add one
-		    #- automatically.
-		    $menuchoice = "\@addprinter"; 
-		}
-		# Refresh printer list
-		if ($menuchoice eq "\@refresh") {
-		    next;
-		}
-		# Configure CUPS
-		if ($menuchoice eq "\@cupsconfig") {
-		    config_cups($printer, $in, $upNetwork);
-		    next;
-		}
-	        # Determine a default name for a new printer queue
-		if ($menuchoice eq "\@addprinter") {
-		    $newqueue = 1;
-		    my %queues; 
-		    @queues{map { split '\|', $_ } keys %{$printer->{configured}}} = ();
-		    my $i = ''; while ($i < 150) { last unless exists $queues{"$defaultprname$i"}; ++$i; }
-		    $queue = "$defaultprname$i";
-		}
-		# Function to switch to another spooler
-		if ($menuchoice eq "\@spooler") {
-		    $printer->{SPOOLER} = setup_default_spooler ($printer, $in, $upNetwork) || $printer->{SPOOLER};
-		    next;
-		}
-		# Rip the queue name out of the chosen menu entry
-		if ($menuchoice =~ /!([^\s!:]+):[^!]*$/) {
-		    $queue = $1;
-		    # Save the cursor position
-		    $cursorpos = $menuchoice;
-		}
-	    }
-	    # Save the default spooler
-	    printer::set_default_spooler($printer);
-	    #- Close printerdrake
-	    $menuchoice eq "\@quit" and last;
-	}
-	if ($newqueue) {
-	    $printer->{NEW} = 1;
-	    #- Set default values for a new queue
-	    $printer::printer_type_inv{$printer->{TYPE}} or 
-		$printer->{TYPE} = printer::default_printer_type($printer);
-	    $printer->{currentqueue} = { queue    => $queue,
-					 foomatic => 0,
-					 desc     => "",
-					 loc      => "",
-					 make     => "",
-					 model    => "",
-					 printer  => "",
-					 driver   => "",
-					 connect  => "",
-					 spooler  => $printer->{SPOOLER},
-				       };
-	    #- Set OLD_QUEUE field so that the subroutines for the
-	    #- configuration work correctly.
-	    $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
-	    #- Do all the configuration steps for a new queue
-	  step_0:
-	    #if ((!$::expert) && (!$::isEmbedded) && (!$::isInstall) &&
-	    if ((!$::isEmbedded) && (!$::isInstall) &&
-		($in->isa('interactive_gtk'))) {
-		$continue = 1;
-		# Enter wizard mode
-		$::Wizard_pix_up = "wiz_printerdrake.png";
-		$::Wizard_title = _("Add a new printer");
-		$::isWizard = 1;
-		# Wizard welcome screen
-		$::Wizard_no_previous = 1;
-		undef $::Wizard_no_cancel;
-		undef $::Wizard_finished;
-		wizard_welcome($printer, $in) or do {
-		    wizard_close($in, 0);
-		    next;
-		};
-		undef $::Wizard_no_previous;
-		eval { 
-		    # eval to catch wizard cancel. The wizard stuff should 
-		    # be in a separate function with steps. see dragw.
-		    # (dams)
-		    $printer->{TYPE} = "LOCAL";
-		  step_1:
-		    !$::expert or choose_printer_type($printer, $in) or
-			goto step_0;
-		  step_2:
-		    setup_printer_connection($printer, $in, $upNetwork) or 
-			do {
-			    goto step_1 if $::expert;
-			    goto step_0;
-			};
-		  step_3:
-		    if (($::expert) or ($printer->{MANUAL}) or
-			($printer->{MORETHANONE})) {
-			choose_printer_name($printer, $in) or
-			    goto step_2;
-		    }
-		    get_db_entry($printer, $in);
-		  step_3_9:
-		    if ((!$::expert) and (!$printer->{MANUAL})) {
-			is_model_correct($printer, $in) or do {
-			    goto step_3 if $printer->{MORETHANONE};
-			    goto step_2;
-			}
-		    }
-		  step_4:
-		    # Remember DB entry for "Previous" button in wizard
-		    my $dbentry = $printer->{DBENTRY};
-		    if (($::expert) or ($printer->{MANUAL}) or
-			($printer->{MANUALMODEL})) { 
-			choose_model($printer, $in) or do {
-			    # Restore DB entry
-			    $printer->{DBENTRY} = $dbentry;
-			    goto step_3_9 if $printer->{MANUALMODEL};
-			    goto step_3;
-			};
-		    }
-		    get_printer_info($printer, $in) or next;
-		  step_5:
-		    setup_options($printer, $in) or
-			goto step_4;
-		    configure_queue($printer, $in);
-		    undef $printer->{MANUAL} if $printer->{MANUAL};
-		    $::Wizard_no_previous = 1;
-		    setasdefault($printer, $in);
-		    $cursorpos = 
-			$printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
-			($printer->{QUEUE} eq $printer->{DEFAULT} ?
-			 _(" (Default)") : ());
-		    my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
-		    if ($testpages == 1) {
-			# User was content with test pages
-			# Leave wizard mode with congratulations screen
-			wizard_close($in, 1);
-			$continue = ($::expert || !$::isInstall || $menushown ||
-				     $in->ask_yesorno('',_("Do you want to configure another printer?")));
-		    } elsif ($testpages == 2) {
-			# User was not content with test pages
-			# Leave wizard mode without congratulations
-			# screen
-			wizard_close($in, 0);
-			$editqueue = 1;
-			$queue = $printer->{QUEUE};
-		    }
-		};
-		wizard_close($in, 0) if ($@ =~ /wizcancel/);
-	    } else {
-		$printer->{TYPE} = "LOCAL";
-		!$::expert or choose_printer_type($printer, $in) or next;
-		#- Cancelling the printer connection type window
-		#- should not restart printerdrake in recommended mode,
-		#- it is the first dialog of the sequence there and
-		#- the "Add printer" sequence should be stopped when there
-		#- are no local printers. In expert mode this is the second
-		#- dialog of the sequence.
-		$continue = 1 if ($::expert || !$::isInstall);
-		setup_printer_connection($printer, $in, $upNetwork) or next;
-		#- Cancelling one of the following dialogs should
-		#- restart printerdrake
-		$continue = 1;
-		if (($::expert) or ($printer->{MANUAL}) or
-		    ($printer->{MORETHANONE})) {
-		    choose_printer_name($printer, $in) or next;
-		}
-		get_db_entry($printer, $in);
-		if ((!$::expert) and (!$printer->{MANUAL})) {
-		    is_model_correct($printer, $in) or next;
-		}
-		if (($::expert) or ($printer->{MANUAL}) or
-		    ($printer->{MANUALMODEL})) { 
-		    choose_model($printer, $in) or next;
-		}
-		get_printer_info($printer, $in) or next;
-		setup_options($printer, $in) or next;
-		configure_queue($printer, $in);
-		undef $printer->{MANUAL} if $printer->{MANUAL};
-		setasdefault($printer, $in);
-		$cursorpos = 
-		    $printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
-		    ($printer->{QUEUE} eq $printer->{DEFAULT} ?
-		     _(" (Default)") : ());
-		my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
-		if ($testpages == 1) {
-		    # User was content with test pages
-		    $continue = ($::expert || !$::isInstall || $menushown ||
-				 $in->ask_yesorno('',_("Do you want to configure another printer?")));
-		} elsif ($testpages == 2) {
-		    # User was not content with test pages
-		    $editqueue = 1;
-		    $queue = $printer->{QUEUE};
-		}
-	    };
-	    undef $printer->{MANUAL} if $printer->{MANUAL};
-	    undef $printer->{NOAUTODETECT} if $printer->{NOAUTODETECT};
-	} else {
-	    $printer->{NEW} = 0;
-	    # Modify a queue, ask which part should be modified
-	    $in->set_help('modifyPrinterMenu') if $::isInstall;
-	    # Get some info to display
-	    my $infoline;
-	    if ($printer->{configured}{$queue}) {
-		# Here we must regenerate the menu entry, because the
-		# parameters can be changed.
-		printer::make_menuentry($printer,$queue);
-		$printer->{configured}{$queue}{'queuedata'}{menuentry} =~
-		    /!([^!]+)$/;
-		$infoline = $1 .
-		    ($queue eq $printer->{DEFAULT} ? _(" (Default)") : ()) .
-		    ($printer->{configured}{$queue}{'queuedata'}{'desc'} ?
-		     ", Descr.: $printer->{configured}{$queue}{'queuedata'}{'desc'}" : ()) .
-		    ($printer->{configured}{$queue}{'queuedata'}{'loc'} ?
-		     ", Loc.: $printer->{configured}{$queue}{'queuedata'}{'loc'}" : ()) .
-		    ($::expert ?
-		     ", Driver: $printer->{configured}{$queue}{'queuedata'}{'driver'}" : ());
-	    } else {
-		# The parameters of a remote CUPS queue cannot be changed,
-		# so we can simply take the menu entry.
-		$cursorpos =~ /!([^!]+)$/;
-		$infoline = $1;
-	    }
-	    if ($in->ask_from_
-		   ({ title => _("Modify printer configuration"),
-		      messages => 
-			   _("Printer %s
-What do you want to modify on this printer?",
-			     $infoline),
-		     cancel => _("Close"),
-		     ok => _("Do it!")
-		     },
-		    [ { val => \$modify, format => \&translate, 
-			type => 'list',
-			list => [ ($printer->{configured}{$queue} ?
-				   (_("Printer connection type"),
-				    _("Printer name, description, location"),
-				    ($::expert ?
-				     _("Printer manufacturer, model, driver") :
-				     _("Printer manufacturer, model")),
-				    (($printer->{configured}{$queue}{'queuedata'}{'make'} ne
-				      "") &&
-				     (($printer->{configured}{$queue}{'queuedata'}{'model'} ne
-				       _("Unknown model")) &&
-				      ($printer->{configured}{$queue}{'queuedata'}{'model'} ne
-				       _("Raw printer"))) ?
-				     _("Printer options") : ())) : ()),
-				   (($queue ne $printer->{DEFAULT}) ?
-				    _("Set this printer as the default") : ()),
-				   ($printer->{configured}{$queue} ? () :
-				    (_("Add this printer to Star Office/OpenOffice.org"),
-				     _("Remove this printer from Star Office/OpenOffice.org"))),
-				   _("Print test pages"),
-				   _("Know how to use this printer"),
-				   ($printer->{configured}{$queue} ?
-				    _("Remove printer") : ()) ] } ] ) ) {
-		# Stay in the queue edit window until the user clicks "Close"
-		# or deletes the queue
-		$editqueue = 1; 
-		#- Copy the queue data and work on the copy
-		$printer->{currentqueue} = {};
-		my $driver;
-		if ($printer->{configured}{$queue}) {
-		    printer::copy_printer_params($printer->{configured}{$queue}{'queuedata'}, $printer->{currentqueue});
-		    #- Keep in mind the printer driver which was used, so it
-                    #- can be determined whether the driver is only
-		    #- available in expert and so for setting the options
-		    #- for the driver in recommended mode a special
-		    #- treatment has to be applied.
-		    $driver = $printer->{currentqueue}{driver};
-		}
-		#- keep in mind old name of queue (in case of changing)
-		$printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
-		#- Reset some variables
-		$printer->{OLD_CHOICE} = undef;
-		$printer->{DBENTRY} = undef;
-		#- Which printer type did we have before (check beginning of
-		#- URI)
-		my $type;
-		if ($printer->{configured}{$queue}) {
-		    for $type (qw(file lpd socket smb ncp postpipe)) {
-			if ($printer->{currentqueue}{'connect'}
-			    =~ /^$type:/) {
-			    $printer->{TYPE} = 
-				($type eq 'file' ? 'LOCAL' : uc($type));
-			    last;
-			}
-		    }
-		}
-		# Do the chosen task
-		if ($modify eq _("Printer connection type")) {
-		    choose_printer_type($printer, $in) &&
-			setup_printer_connection($printer, $in, $upNetwork) &&
-		            configure_queue($printer, $in);
-		} elsif ($modify eq _("Printer name, description, location")) {
-		    choose_printer_name($printer, $in) &&
-			configure_queue($printer, $in);
-		    # Delete old queue when it was renamed
-		    if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
-			my $w = $in->wait_message('', _("Removing old printer \"%s\"...", $printer->{OLD_QUEUE}));
-		        printer::remove_queue($printer, $printer->{OLD_QUEUE});
-			# If the default printer was renamed, correct the
-			# the default printer setting of the spooler
-			if ($queue eq $printer->{DEFAULT}) {
-			    $printer->{DEFAULT} = $printer->{QUEUE};
-			    printer::set_default_printer($printer);
-			}
-			$queue = $printer->{QUEUE};
-		    }
-		} elsif (($modify eq _("Printer manufacturer, model, driver")) ||
-			 ($modify eq _("Printer manufacturer, model"))) {
-		    get_db_entry($printer, $in);
-		    choose_model($printer, $in) &&
-			get_printer_info($printer, $in) &&
-			setup_options($printer, $in) &&
-			configure_queue($printer, $in);
-		} elsif ($modify eq _("Printer options")) {
-		    get_printer_info($printer, $in) &&
-			setup_options($printer, $in) &&
-			configure_queue($printer, $in);
-		} elsif ($modify eq _("Set this printer as the default")) {
-		    $printer->{DEFAULT} = $queue;
-		    printer::set_default_printer($printer);
-		    $in->ask_warn(_("Default printer"),
-				  _("The printer \"%s\" is set as the default printer now.", $queue));
-		} elsif ($modify eq _("Add this printer to Star Office/OpenOffice.org")) {
-		    if (printer::addcupsremotetoapplications
-			($printer, $queue)) {
-			$in->ask_warn(_("Adding printer to Star Office/OpenOffice.org"),
-				      _("The printer \"%s\" was successfully added to Star Office/OpenOffice.org.", $queue));
-		    } else {
-			$in->ask_warn(_("Adding printer to Star Office/OpenOffice.org"),
-				      _("Failed to add the printer \"%s\" to Star Office/OpenOffice.org.", $queue));
-		    }
-		} elsif ($modify eq _("Remove this printer from Star Office/OpenOffice.org")) {
-		    if (printer::removeprinterfromapplications
-			($printer, $queue)) {
-			$in->ask_warn(_("Removing printer from Star Office/OpenOffice.org"),
-				      _("The printer \"%s\" was successfully removed from Star Office/OpenOffice.org.", $queue));
-		    } else {
-			$in->ask_warn(_("Removing printer from Star Office/OpenOffice.org"),
-				      _("Failed to remove the printer \"%s\" from Star Office/OpenOffice.org.", $queue));
-		    }
-		} elsif ($modify eq _("Print test pages")) {
-		    print_testpages($printer, $in, $upNetwork);
-		} elsif ($modify eq _("Know how to use this printer")) {
-		    printer_help($printer, $in);
-		} elsif ($modify eq _("Remove printer")) {
-		    if ($in->ask_yesorno('',
-           _("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
-			{
-			    my $w = $in->wait_message('', _("Removing printer \"%s\"...", $queue));
-			    if (printer::remove_queue($printer, $queue)) { 
-				$editqueue = 0;
-				# Define a new default printer if we have
-				# removed the default one
-				if ($queue eq $printer->{DEFAULT}) {
-				    my @k = sort(keys(%{$printer->{configured}}));
-				    if (@k) {
-					$printer->{DEFAULT} = $k[0];
-				        printer::set_default_printer($printer);
-				    } else {
-					$printer->{DEFAULT} = "";
-				    }
-				}
-				# Let the main menu cursor go to the default
-				# position
-				$cursorpos = "::";
-			    }
-			}
-		    }		
-		}
-		# Make sure that the cursor is still at the same position
-		# in the main menu when one has modified something on the
-		# current printer
-		if (($printer->{QUEUE}) && ($printer->{QUEUE} ne "")) {
-		    if ($printer->{configured}{$printer->{QUEUE}}) {
-			$cursorpos = 
-			    $printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} . 
-			    ($printer->{QUEUE} eq $printer->{DEFAULT} ? 
-			     _(" (Default)") : ());
-		    } else {
-			my $s1 = _(" (Default)");
-			my $s2 = $s1;
-			$s2 =~ s/\(/\\\(/;
-			$s2 =~ s/\)/\\\)/;
-			if (($printer->{QUEUE} eq $printer->{DEFAULT}) &&
-			    ($cursorpos !~ /$s2/)) {
-			    $cursorpos .= $s1;
-			}
-		    }
-		}
-	    } else {
-		$editqueue = 0;
-	    }
-	    $continue = ($editqueue || $::expert || !$::isInstall || 
-			 $menushown ||
-			 $in->ask_yesorno('',_("Do you want to configure another printer?")));
-	}
-
-	# Configure the current printer queue in applications when main menu
-	# will not be shown (During installation in "Recommended" mode)
-	if ($::isInstall && !$::expert && !$menushown && !$continue) {
-	    my $w = $in->wait_message('', _("Configuring applications..."));
-	    printer::configureapplications($printer);
-	}
-
-	# Delete some variables
-	$printer->{OLD_QUEUE} = "";
-	$printer->{QUEUE} = "";
-	$printer->{TYPE} = "";
-	$printer->{str_type} = "";
-	$printer->{currentqueue} = {};
-	$printer->{DBENTRY} = "";
-	$printer->{ARGS} = "";
-	$printer->{complete} = 0;
-	$printer->{OLD_CHOICE} = "";
-    }
-    # Clean up the $printer data structure for auto-install log
-    for my $queue (keys %{$printer->{configured}}) {
-	for my $item (keys %{$printer->{configured}{$queue}}) {
-	    if ($item ne "queuedata") {
-		delete($printer->{configured}{$queue}{$item});
-	    }
-	}
-	if ($printer->{configured}{$queue}{'queuedata'}{'menuentry'}) {
-	    delete($printer->{configured}{$queue}{'queuedata'}{'menuentry'});
-	}
-    }
-    delete($printer->{OLD_QUEUE});
-    delete($printer->{QUEUE});
-    delete($printer->{TYPE});
-    delete($printer->{str_type});
-    delete($printer->{currentqueue});
-    delete($printer->{DBENTRY});
-    delete($printer->{ARGS});
-    delete($printer->{complete});
-    delete($printer->{OLD_CHOICE});
-    delete($printer->{NEW});
-    delete($printer->{MORETHANONE});
-    delete($printer->{MANUALMODEL});
-    #use Data::Dumper;
-    #print "###############################################################################\n", Dumper($printer); 
-
-}
-
diff --git a/perl-install/proxy.pm b/perl-install/proxy.pm
deleted file mode 100644
index 72fd35664..000000000
--- a/perl-install/proxy.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package proxy;
-
-use diagnostics;
-use strict;
-use run_program;
-use common;
-use log;
-use c;
-
-
-sub main {
-    my ($prefix, $in) = @_;
-    my $proxy_cfg = {};
-    my $config_file = "$prefix/usr/lib/wgetrc";
-
-    # grab current config
-    foreach (cat_($config_file)) {
-      /http_proxy = (http:.*):(\d+)/ and ($proxy_cfg->{http_url}, $proxy_cfg->{http_port}) = ($1, $2);
-      /ftp_proxy = (ftp:.*):(\d+)/ and ($proxy_cfg->{ftp_url}, $proxy_cfg->{ftp_port}) = ($1, $2);
-      /http_user = (.*)/ and ($proxy_cfg->{login}) = $1;
-      if (/http_passwd = (.*)/) {
-        ($proxy_cfg->{passwd}) = $1;
-        ($proxy_cfg->{passwd2}) = $1;
-      }
-    }
-  begin:
-    $::isWizard = 1;
-    $::Wizard_no_previous = 1;
-    $in->ask_okcancel(_("Proxy configuration"),
-                      _("Welcome to the proxy configuration utility.\n\nHere, you'll be able to set up your http and ftp proxies\nwith or without login and password\n"
-                       ), 1);
-
-    # http proxy
-  step_http_proxy:
-    undef $::Wizard_no_previous;
-    $proxy_cfg->{http_url} ||= "http://www.proxy.com/";
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please fill in the http proxy informations\nLeave it blank if you don't want an http proxy"),
-		  [ { label => _("URL"), val => \$proxy_cfg->{http_url} },
-		    { label => _("port"), val => \$proxy_cfg->{http_port} }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{http_url} && $proxy_cfg->{http_url} !~ /^http:/) {
-			  $in->ask_warn('', _("Url should begin with 'http:'"));
-			  return (1,0);
-		      }
-		      if ($proxy_cfg->{http_port} && $proxy_cfg->{http_port} !~ /^\d+$/) {
-			  $in->ask_warn('', _("The port part should be numeric"));
-			  return (1,1);
-		      }
-		      0;
-		  }
-		 ) or goto begin;
-
-    # ftp proxy
-    step_ftp_proxy:
-    $proxy_cfg->{ftp_url} ||= "ftp://ftp.proxy.com/";
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please fill in the ftp proxy informations\nLeave it blank if you don't want an ftp proxy"),
-		  [ { label => _("URL"), val => \$proxy_cfg->{ftp_url} },
-		    { label => _("port"), val => \$proxy_cfg->{ftp_port} }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{ftp_url} && $proxy_cfg->{ftp_url} !~ /^ftp:/) {
-			  $in->ask_warn('', _("Url should begin with 'ftp:'"));
-			  return (1,0);
-		      }
-		      if ($proxy_cfg->{ftp_port} && $proxy_cfg->{ftp_port} !~ /^\d+$/) {
-			  $in->ask_warn('', _("The port part should be numeric"));
-			  return (1,1);
-		      }
-		      0;
-		  }
-		 ) or goto step_http_proxy;
-
-    # proxy login/passwd
-    step_login:
-    $in->ask_from(_("Proxy configuration"),
-		  _("Please enter proxy login and password, if any.\nLeave it blank if you don't want login/passwd"),
-		  [ { label => _("login"), val => \$proxy_cfg->{login} },
-		    {
-		     label => _("password"), val => \$proxy_cfg->{passwd}, hidden => 1 },
-		    {
-		     label => _("re-type password"), val => \$proxy_cfg->{passwd2}, hidden => 1 }
-		  ],
-		  complete => sub {
-		      if ($proxy_cfg->{passwd} ne $proxy_cfg->{passwd2}) {
-			  $in->ask_warn('', _("The passwords don't match. Try again!"));
-			  return(1,1);
-		      }
-		      0;
-		  }
-		 ) or goto step_ftp_proxy;
-    # save config
-    substInFile {
-        s/^(http|ftp)_proxy.*\n//;
-        eof and $_ .= "http_proxy = $proxy_cfg->{http_url}:$proxy_cfg->{http_port}
-ftp_proxy = $proxy_cfg->{ftp_url}:$proxy_cfg->{ftp_port}\n";
-    } $config_file;
-    $proxy_cfg->{login} and substInFile {
-        s/^http_(user|passwd).*\n//;
-        eof and $_ .= "http_user = $proxy_cfg->{login}
-http_passwd = $proxy_cfg->{passwd}\n" } $config_file;
-    log::l("[drakproxy] Installation complete, exiting\n");
-}
-
-#---------------------------------------------
-#                WONDERFULL pad
-#---------------------------------------------
-1;
diff --git a/perl-install/raid.pm b/perl-install/raid.pm
deleted file mode 100644
index 86a27d866..000000000
--- a/perl-install/raid.pm
+++ /dev/null
@@ -1,180 +0,0 @@
-package raid; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use run_program;
-use devices;
-use modules;
-use fs;
-
-sub nb { 
-    my ($nb) = @_;
-    first((ref $nb ? $nb->{device} : $nb) =~ /(\d+)/);
-}
-
-sub new {
-    my ($raids, @parts) = @_;
-    my $nb = @$raids; 
-    $raids->[$nb] = { 'chunk-size' => "64k", type => 0x483, disks => [ @parts ], device => "md$nb", notFormatted => 1, level => 1 };
-    foreach my $part (@parts) {
-	$part->{raid} = $nb;
-	delete $part->{mntpoint};
-    }
-    update($raids->[$nb]);
-    $nb;
-}
-
-sub add {
-    my ($raids, $part, $nb) = @_; $nb = nb($nb);
-    $raids->[$nb]{isMounted} and die _("Can't add a partition to _formatted_ RAID md%d", $nb);
-    inactivate_and_dirty($raids->[$nb]);
-    $part->{notFormatted} = 1; $part->{isFormatted} = 0;
-    $part->{raid} = $nb;
-    delete $part->{mntpoint};
-    push @{$raids->[$nb]{disks}}, $part;
-    update($raids->[$nb]);
-}
-
-sub delete {
-    my ($raids, $nb) = @_;
-    $nb = nb($nb);
-    inactivate_and_dirty($raids->[$nb]);
-    delete $_->{raid} foreach @{$raids->[$nb]{disks}};
-    undef $raids->[$nb];
-}
-
-sub changeNb {
-    my ($raids, $oldnb, $newnb) = @_;
-    if ($oldnb != $newnb) {
-	inactivate_and_dirty($raids->[$_]) foreach $oldnb, $newnb;
-
-	($raids->[$newnb], $raids->[$oldnb]) = ($raids->[$oldnb], undef);
-	$raids->[$newnb]{device} = "md$newnb";
-	$_->{raid} = $newnb foreach @{$raids->[$newnb]{disks}};
-    }
-    $newnb;
-}
-
-sub removeDisk {
-    my ($raids, $part) = @_;
-    my $nb = nb($part->{raid});
-    inactivate_and_dirty($raids->[$nb]);
-    delete $part->{raid};
-    my $disks = $raids->[$nb]{disks};
-    @$disks = grep { $_ != $part } @$disks;
-    if (@$disks) {
-	update($raids->[$nb]);
-    } else {
-	undef $raids->[$nb];
-    }
-}
-
-sub updateSize {
-    my ($part) = @_;
-    local $_ = $part->{level};
-    my @l = map { $_->{size} } @{$part->{disks}};
-
-    $part->{size} = do {
-	if (/0|linear/) { sum @l        }
-	elsif (/1/  )   { min @l        }
-	elsif (/4|5/)   { min(@l) * $#l }
-    };
-}
-
-sub module {
-    my ($part) = @_;
-    my $mod = $part->{level};
-
-    $mod = 5 if $mod eq "4";
-    $mod = "raid$mod" if $mod =~ /^\d+$/;
-    $mod;
-}
-
-
-sub update {
-    updateSize($_) foreach @_;
-}
-
-sub write {
-    my ($raids, $file) = @_;
-    local *F;
-    local $\ = "\n";
-    open F, ">$file" or die _("Can't write file %s", $file);
-
-    foreach (grep {$_} @$raids) {
-	print F <<"EOF";
-raiddev       /dev/$_->{device}
-raid-level    $_->{level}
-chunk-size    $_->{'chunk-size'}
-persistent-superblock 1
-EOF
-	print F "nr-raid-disks ", int @{$_->{disks}};
-	map_index {	    
-	    print F "    device    ", devices::make($_->{device});
-	    print F "    raid-disk $::i";
-	} @{$_->{disks}};
-    }
-}
-
-sub make {
-    my ($raids, $part) = @_;    
-
-    return if is_active($part->{device});
-
-    inactivate_and_dirty($part);
-
-    isRAID($_) and make($raids, $_) foreach @{$part->{disks}};
-    my $dev = devices::make($part->{device});
-    eval { modules::load(module($part)) };
-    &write($raids, "/etc/raidtab");
-    run_program::run("mkraid", "--really-force", $dev) or die
-	$::isStandalone ? _("mkraid failed (maybe raidtools are missing?)") : _("mkraid failed");
-}
-
-sub format_part {
-    my ($raids, $part) = @_;
-    $part->{isFormatted} and return;
-
-    make($raids, $part);
-    fs::real_format_part($part);
-    $_->{isFormatted} = 1 foreach @{$part->{disks}};
-}
-
-sub verify {
-    my ($raids) = @_;
-    $raids or return;
-    foreach (grep {$_} @$raids) {
-	@{$_->{disks}} >= ($_->{level} =~ /4|5/ ? 3 : 2) or die _("Not enough partitions for RAID level %d\n", $_->{level});
-    }
-}
-
-sub prepare_prefixed {
-    my ($raids, $prefix) = @_;
-    $raids or return;
-
-    eval { cp_af("/etc/raidtab", "$prefix/etc/raidtab") };
-    foreach (grep {$_} @$raids) {
-	devices::make("$prefix/dev/$_->{device}") foreach @{$_->{disks}};
-    }
-}
-
-sub inactivate_and_dirty {
-    my ($part) = @_;
-    run_program::run("raidstop", devices::make($part->{device}));
-    $part->{notFormatted} = 1; $part->{isFormatted} = 0;
-}
-
-sub is_active {
-    my ($dev) = @_;
-    grep { /^$dev / } cat_("/proc/mdstat");
-}
-
-sub inactivate_all() { run_program::run("raidstop", devices::make("md$_")) foreach 0..7 }
-
-1;
diff --git a/perl-install/resize_fat/.cvsignore b/perl-install/resize_fat/.cvsignore
deleted file mode 100644
index 3001c7424..000000000
--- a/perl-install/resize_fat/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-blib
-pm_to_blib
-Makefile_c
-c_rewritten.c
-c_rewritten.bs
diff --git a/perl-install/resize_fat/Makefile b/perl-install/resize_fat/Makefile
deleted file mode 100644
index a82ca8441..000000000
--- a/perl-install/resize_fat/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-c_rewritten: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/resize_fat ; ln -s ../resize_fat/blib/arch/auto ../auto/resize_fat
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o
diff --git a/perl-install/resize_fat/Makefile.PL b/perl-install/resize_fat/Makefile.PL
deleted file mode 100644
index 712f4e395..000000000
--- a/perl-install/resize_fat/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
-    'MAKEFILE'  => 'Makefile_c',
-    'NAME'	=> 'c_rewritten',
-    'OPTIMIZE'  => '-Os',
-    'VERSION_FROM' => 'c_rewritten.pm', # finds $VERSION
-    'LIBS'	=> '',   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-    'INC'	=> '',     # e.g., '-I/usr/include/other' 
-);
diff --git a/perl-install/resize_fat/README b/perl-install/resize_fat/README
deleted file mode 100644
index 12b64dea9..000000000
--- a/perl-install/resize_fat/README
+++ /dev/null
@@ -1,8 +0,0 @@
-TODO:
-
-resize_fat::fat::update($fs) should be called before doing undoable things
-(before the sync in construct_dir_tree)
-
-BUGS:
-no known bugs :)
-if you found one, please mail pixel@mandrakesoft.com !!
diff --git a/perl-install/resize_fat/any.pm b/perl-install/resize_fat/any.pm
deleted file mode 100644
index f811e7159..000000000
--- a/perl-install/resize_fat/any.pm
+++ /dev/null
@@ -1,123 +0,0 @@
-package resize_fat::any; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($FREE $FILE $DIRECTORY $UNMOVEABLE);
-
-use common;
-use resize_fat::fat;
-use resize_fat::directory;
-use resize_fat::dir_entry;
-use resize_fat::c_rewritten;
-
-
-$FREE       = 0;
-$FILE       = 1;
-$DIRECTORY  = 2;
-$UNMOVEABLE = 8;
-
-
-1;
-
-
-#- returns the number of clusters for a given filesystem type
-sub min_cluster_count($) {
-    my ($fs) = @_;
-    (1 << $ {{ FAT16 => 12, FAT32 => 12 }}{$fs->{fs_type}}) - 12;
-}
-sub max_cluster_count($) {
-    my ($fs) = @_;
-    (1 << $ {{ FAT16 => 16, FAT32 => 28 }}{$fs->{fs_type}}) - 11;
-}
-
-
-
-#- patch to get the function last_used that return the last used cluster of a fs.
-sub last_used($) {
-    my ($fs) = @_;
-
-    #- count in negative so absolute value count back to 2.
-    foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if resize_fat::c_rewritten::flag(-$_) }
-    die "any: empty FAT table of $fs->{nb_clusters} clusters";
-}
-#- patch to get the function last_unmoveable that return the last unmoveable cluster of a fs.
-sub last_unmoveable($) {
-    my ($fs) = @_;
-
-    #- count in negative so absolute value count back to 2.
-    foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if 0x8 & resize_fat::c_rewritten::flag(-$_) }
-
-    #- Oh at this point there are no unmoveable blocks!
-    2;
-}
-
-#- calculates the minimum size of a partition, in physical sectors
-sub min_size($) {
-    my ($fs) = @_;
-    my $count = $fs->{clusters}{count};
-
-    #- directories are both in `used' and `dirs', so are counted twice
-    #- It's done on purpose since we're moving all directories. So at the worse
-    #- moment, 2 directories are there, but that way nothing wrong can happen :)
-    my $min_cluster_count = max(2 + $count->{used} + $count->{bad} + $count->{dirs}, min_cluster_count($fs));
-    $min_cluster_count = max($min_cluster_count, last_unmoveable($fs));
-
-    my $size = $min_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-      divide($fs->{cluster_offset}, $SECTORSIZE) +
-    64*1024*1024 / $SECTORSIZE; #- help with such more sectors (ie 64Mb).
-    
-    #- help zindozs again with 512Mb+ at least else partition is ignored.
-    if ($resize_fat::isFAT32) {
-        $size = max($size, 524*1024*1024 / $SECTORSIZE);
-    }
-    $size;
-
-}
-#- calculates the maximum size of a partition, in physical sectors
-sub max_size($) {
-    my ($fs) = @_;
-
-    my $max_cluster_count = min($fs->{nb_fat_entries} - 2, max_cluster_count($fs));
-
-    $max_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-	divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-#- calculates used size in order to avoid modifying anything.
-sub used_size($) {
-    my ($fs) = @_;
-
-    my $used_cluster_count = max(last_used($fs), min_cluster_count($fs));
-
-    $used_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-	divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-
-#- fills in fat_flag_map in c_rewritten.
-#- Each FAT entry is flagged as either FREE, FILE or DIRECTORY.
-sub flag_clusters {
-    my ($fs) = @_;
-    my ($cluster, $curr_dir_name, $entry, $type, $nb_dirs);
-
-    my $f = sub {
-	($curr_dir_name, $entry) = @_;
-	$cluster = resize_fat::dir_entry::get_cluster($entry);
-
-	if (resize_fat::dir_entry::is_file($entry)) {
-	    $type = $FILE;
-	    $type |= $UNMOVEABLE if resize_fat::dir_entry::is_unmoveable($entry);
-	} elsif (resize_fat::dir_entry::is_directory($entry)) {
-	    $type = $DIRECTORY;
-	} else { return }
-
-	my $nb = resize_fat::c_rewritten::checkFat($cluster, $type, "$curr_dir_name/$entry->{name}");
-	print "resize_fat:flag_clusters: check fat returned $nb of type $type for $curr_dir_name/$entry->{name}\n";
-	$nb_dirs += $nb if $type == $DIRECTORY;
-	0;
-    };
-
-    #- this must call allocate_fat_flag that zeroes the buffer allocated.
-    resize_fat::c_rewritten::allocate_fat_flag($fs->{nb_clusters} + 2);
-
-    resize_fat::directory::traverse_all($fs, $f);
-    $fs->{clusters}{count}{dirs} = $nb_dirs;
-}
diff --git a/perl-install/resize_fat/boot_sector.pm b/perl-install/resize_fat/boot_sector.pm
deleted file mode 100644
index c87328637..000000000
--- a/perl-install/resize_fat/boot_sector.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package resize_fat::boot_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-use resize_fat::any;
-use resize_fat::directory;
-
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a3 a8 S C S C S S C S S S I I I S S I S S a458 S";
-my @fields = (
-    'boot_jump',		#- boot strap short or near jump
-    'system_id',		#- Name - can be used to special case partition manager volumes
-    'sector_size',		#- bytes per logical sector
-    'cluster_size_in_sectors',	#- sectors/cluster
-    'nb_reserved',		#- reserved sectors
-    'nb_fats',			#- number of FATs
-    'nb_root_dir_entries',	#- number of root directory entries
-    'small_nb_sectors',		#- number of sectors: big_nb_sectors supersedes
-    'media',			#- media code
-    'fat16_fat_length',		#- sectors/FAT for FAT12/16
-    'sectors_per_track',
-    'nb_heads',
-    'nb_hidden',		#- (unused)
-    'big_nb_sectors',		#- number of sectors (if small_nb_sectors == 0)
-
-#- FAT32-only entries
-    'fat32_fat_length',		#- size of FAT in sectors
-    'fat32_flags',		#- bit8: fat mirroring,
-				#- low4: active fat
-    'fat32_version',		#- minor * 256 + major
-    'fat32_root_dir_cluster',
-    'info_offset_in_sectors',
-    'fat32_backup_sector',
-
-#- Common again...
-    'boot_code',		#- Boot code (or message)
-    'boot_sign',		#- 0xAA55
-);
-
-1;
-
-
-#- trimfs_init_boot_sector() - reads in the boot sector - gets important info out
-#- of boot sector, and puts in main structure - performs sanity checks - returns 1
-#- on success, 0 on failureparameters: filesystem an empty structure to fill.
-sub read($) {
-    my ($fs) = @_;
-
-    my $boot = eval { resize_fat::io::read($fs, 0, $SECTORSIZE) }; $@ and die "reading boot sector failed on device $fs->{fs_name}";
-    @{$fs}{@fields} = unpack $format, $boot;
-
-    $fs->{nb_sectors} = $fs->{small_nb_sectors} || $fs->{big_nb_sectors};
-    $fs->{cluster_size} = $fs->{cluster_size_in_sectors} * $fs->{sector_size};
-
-    $fs->{boot_sign} == 0xAA55 or die "Invalid signature for a MS-based filesystem.\n";
-    $fs->{nb_sectors} < 32 and die "Too few sectors for viable file system\n";
-    $fs->{nb_fats} == 2 or cdie "Weird number of FATs: $fs->{nb_fats}, not 2.\n";
-    $fs->{sector_size} == 512 or cdie "Strange sector_size != 512\n";
-
-    if ($fs->{fat16_fat_length}) {
-	#- asserting FAT16, will be verified later on
-	$resize_fat::isFAT32 = 0;
-        $fs->{fs_type} = 'FAT16';
-	$fs->{fs_type_size} = 16;
-	$fs->{fat_length} = $fs->{fat16_fat_length};
-	$resize_fat::bad_cluster_value = 0xfff7; #- 2**16 - 1
-    } else {
-	$resize_fat::isFAT32 = 1;
-        $fs->{fs_type} = 'FAT32';
-        $fs->{fs_type_size} = 32;
-	$fs->{fat_length} = $fs->{fat32_fat_length};
-
-	$fs->{nb_root_dir_entries} = 0;
-	$fs->{info_offset} = $fs->{info_offset_in_sectors} * $fs->{sector_size};
-	$resize_fat::bad_cluster_value = 0x0ffffff7;
-    }
-
-    $fs->{fat_offset} = $fs->{nb_reserved} * $fs->{sector_size};
-    $fs->{fat_size} = $fs->{fat_length} * $fs->{sector_size};
-    $fs->{root_dir_offset} = $fs->{fat_offset} + $fs->{fat_size} * $fs->{nb_fats};
-    $fs->{root_dir_size} = $fs->{nb_root_dir_entries} * resize_fat::directory::entry_size();
-    $fs->{cluster_offset} = $fs->{root_dir_offset} + $fs->{root_dir_size} - 2 * $fs->{cluster_size};
-
-    $fs->{nb_fat_entries} = divide($fs->{fat_size}, $fs->{fs_type_size} / 8);
-
-    #- - 2 because clusters 0 & 1 doesn't exist
-    $fs->{nb_clusters} = divide($fs->{nb_sectors} * $fs->{sector_size} - $fs->{cluster_offset}, $fs->{cluster_size}) - 2;
-
-    $fs->{dir_entries_per_cluster} = divide($fs->{cluster_size}, psizeof($format));
-
-#-    $fs->{nb_clusters} >= resize_fat::any::min_cluster_count($fs) or die "error: not enough sectors for a $fs->{fs_type}\n";
-    $fs->{nb_clusters} <  resize_fat::any::max_cluster_count($fs) or die "error: too many sectors for a $fs->{fs_type}\n";
-}
-
-sub write($) {
-    my ($fs) = @_;
-    my $boot = pack($format, @{$fs}{@fields});
-
-    eval { resize_fat::io::write($fs, 0, $SECTORSIZE, $boot) }; $@ and die "writing the boot sector failed on device $fs->{fs_name}";
-
-    if ($resize_fat::isFAT32) {
-	#- write backup
-	eval { resize_fat::io::write($fs, $fs->{fat32_backup_sector} * $SECTORSIZE, $SECTORSIZE, $boot) };
-	$@ and die "writing the backup boot sector (#$fs->{fat32_backup_sector}) failed on device $fs->{fs_name}";
-    }
-}
diff --git a/perl-install/resize_fat/c_rewritten.pm b/perl-install/resize_fat/c_rewritten.pm
deleted file mode 100644
index d74ecb5d3..000000000
--- a/perl-install/resize_fat/c_rewritten.pm
+++ /dev/null
@@ -1,14 +0,0 @@
-package resize_fat::c_rewritten; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-
-bootstrap resize_fat::c_rewritten $VERSION;
-
-1;
-
diff --git a/perl-install/resize_fat/c_rewritten.xs b/perl-install/resize_fat/c_rewritten.xs
deleted file mode 100644
index 92361097d..000000000
--- a/perl-install/resize_fat/c_rewritten.xs
+++ /dev/null
@@ -1,259 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-
-/* set by scan_fat, used by next */
-short *fat = NULL;
-char *fat_flag_map = NULL;
-unsigned int *fat_remap = NULL;
-int fat_remap_size;
-int type_size, nb_clusters, bad_cluster_value;
-
-void free_all() {
-#define FREE(p) if (p) free(p), p = NULL;
-  FREE(fat);
-  FREE(fat_flag_map);
-  FREE(fat_remap);
-#undef FREE
-}
-
-unsigned int next(unsigned int cluster) {
-  short *p = fat + type_size * cluster;
-  if (!fat) {
-    free_all();
-    croak("fat::next: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("fat::next: cluster %d outside filesystem", cluster);
-  }
-  return type_size == 1 ? *p : *((unsigned int *) p);
-}
-
-void set_next(unsigned int cluster, unsigned int val) {
-  short *p = fat + type_size * cluster;
-  if (!fat) {
-    free_all();
-    croak("fat::set_next: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("fat::set_next: cluster %d outside filesystem", cluster);
-  }
-  type_size == 1 ? *p : *((unsigned int *) p) = val;
-}
-
-MODULE = resize_fat::c_rewritten PACKAGE = resize_fat::c_rewritten
-
-void 
-read_fat(fd, offset, size, magic)
-  int fd
-  int offset
-  int size
-  unsigned char magic
-  PPCODE:
-{
-  fat = (short *) malloc(size);
-  if (!fat) {
-    free_all();
-    croak("read_fat: not enough memory");
-  }
-  if (lseek(fd, offset, SEEK_SET) != offset ||
-      read(fd, fat, size) != size) {
-    free_all();
-    croak("read_fat: reading FAT failed");
-  }
-  if (magic != *(unsigned char *) fat) {
-    free_all();
-    croak("read_fat: FAT has invalid signature");
-  }
-}
-
-void
-write_fat(fd, size)
-  int fd
-  int size
-  PPCODE:
-{
-  if (write(fd, fat, size) != size) {
-    free_all();
-    croak("write_fat: write failed");
-  }
-}
-
-void
-free_all()
-  PPCODE:
-  free_all();
-
-void
-scan_fat(nb_clusters_, type_size_)
-  int nb_clusters_
-  int type_size_
-  PPCODE:
-{
-  unsigned int v;  
-  int free = 0, bad = 0, used = 0;
-  short *p;
-  
-  type_size = type_size_; nb_clusters = nb_clusters_;
-  bad_cluster_value = type_size == 32 ? 0x0ffffff7 : 0xfff7;
-
-  if (type_size % 16) {
-    free_all();
-    croak("scan_fat: unable to handle FAT%d", type_size);
-  }
-  type_size /= 16;
-
-  for (p = fat + 2 * type_size; p < fat + type_size * (nb_clusters + 2); p += type_size) {
-    v = type_size == 1 ? *p : *((unsigned int *) p);
-
-    if (v == 0) free++;
-    else if (v == bad_cluster_value) bad++;
-  }
-  used = nb_clusters - free - bad;
-  EXTEND(SP, 3);
-  PUSHs(sv_2mortal(newSViv(free)));
-  PUSHs(sv_2mortal(newSViv(bad)));
-  PUSHs(sv_2mortal(newSViv(used)));
-}
-
-unsigned int
-next(unused, cluster)
-  void *unused
-  unsigned int cluster
-  CODE:
-  RETVAL = next(cluster);
-  OUTPUT:
-  RETVAL
-
-void
-set_next(unused, cluster, val)
-  void *unused
-  unsigned int cluster
-  unsigned int val
-  CODE:
-  set_next(cluster, val);
-
-void
-allocate_fat_flag(size)
-  int size
-  CODE:
-  fat_flag_map = calloc(size, 1);
-  if (!fat_flag_map) {
-    free_all();
-    croak("allocate_fat_flag: not enough memory");
-  }
-
-int
-checkFat(cluster, type, name)
-  unsigned int cluster
-  int type
-  char *name
-  CODE:
-  int nb = 0;
-
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  for (; cluster < bad_cluster_value; cluster = next(cluster)) {
-    if (cluster == 0) {
-      free_all();
-      croak("Bad FAT: unterminated chain for %s\n", name);
-    }
-    if (cluster >= nb_clusters + 2) {
-      free_all();
-      croak("Bad FAT: chain outside filesystem for %s\n", name);
-    }
-    if (fat_flag_map[cluster]) {
-      free_all();
-      croak("Bad FAT: cluster %d is cross-linked for %s\n", cluster, name);
-    }
-    fat_flag_map[cluster] = type;
-    nb++;
-  }
-  RETVAL = nb;
-  OUTPUT:
-  RETVAL
-
-unsigned int
-flag(cluster)
-  unsigned int cluster
-  CODE:
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("Bad FAT: going outside filesystem");
-  }
-  RETVAL = fat_flag_map[cluster];
-  OUTPUT:
-  RETVAL
-
-void
-set_flag(cluster, flag)
-  unsigned int cluster
-  int flag
-  CODE:
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("Bad FAT: going outside filesystem");
-  }
-  fat_flag_map[cluster] = flag;
-
-void
-allocate_fat_remap(size)
-  int size
-  CODE:
-  fat_remap_size = size;
-  fat_remap = (unsigned int *) calloc(size, sizeof(unsigned int *));
-  if (!fat_remap) {
-    free_all();
-    croak("allocate_fat_remap: not enough memory");
-  }
-
-unsigned int
-fat_remap(cluster)
-  unsigned int cluster
-  CODE:
-  if (!fat_remap) {
-    free_all();
-    croak("fat_remap: trying to use null pointer");
-  }
-  if (cluster >= bad_cluster_value) {
-    RETVAL = cluster; /* special cases */
-  } else {
-    if (cluster >= fat_remap_size) {
-      free_all();
-      croak("fat_remap: cluster %d >= %d in fat_remap", cluster, fat_remap_size);
-    }
-    RETVAL = fat_remap[cluster];
-  }
-  OUTPUT:
-  RETVAL
-
-void
-set_fat_remap(cluster, val)
-  unsigned int cluster
-  unsigned int val
-  CODE:
-  if (!fat_remap) {
-    free_all();
-    croak("set_fat_remap: trying to use null pointer");
-  }
-  if (cluster >= fat_remap_size) {
-    free_all();
-    croak("set_fat_remap: cluster %d >= %d in set_fat_remap", cluster, fat_remap_size);
-  }
-  if (val < bad_cluster_value && val >= fat_remap_size) {
-    free_all();
-    croak("set_fat_remap: remapping cluster %d to cluster %d >= %d in set_fat_remap", cluster, val, fat_remap_size);
-  }
-  fat_remap[cluster] = val;
diff --git a/perl-install/resize_fat/dir_entry.pm b/perl-install/resize_fat/dir_entry.pm
deleted file mode 100644
index b39c72094..000000000
--- a/perl-install/resize_fat/dir_entry.pm
+++ /dev/null
@@ -1,77 +0,0 @@
-package resize_fat::dir_entry; # $Id$
-
-use diagnostics;
-use strict;
-
-
-my $DELETED_FLAG      = 0xe5;
-
-my $READ_ONLY_ATTR    = 0x01;
-my $HIDDEN_ATTR       = 0x02;
-my $SYSTEM_ATTR       = 0x04;
-my $VOLUME_LABEL_ATTR = 0x08;
-my $VFAT_ATTR         = 0x0f;
-my $DIRECTORY_ATTR    = 0x10;
-
-1;
-
-sub get_cluster($) {
-    my ($entry) = @_;
-    $entry->{first_cluster} + ($resize_fat::isFAT32 ? $entry->{first_cluster_high} * (1 << 16) : 0);
-}
-sub set_cluster($$) {
-    my ($entry, $val) = @_;
-    $entry->{first_cluster} = $val & (1 << 16) - 1;
-    $entry->{first_cluster_high} = $val >> 16 if $resize_fat::isFAT32;
-}
-
-sub is_unmoveable($) {
-    my ($entry) = @_;
-    $entry->{attributes} & $HIDDEN_ATTR || $entry->{attributes} & $SYSTEM_ATTR;
-}
-
-sub is_directory($) {
-    my ($entry) = @_;
-    $entry->{attributes} & $DIRECTORY_ATTR && $entry->{name} !~ /^\.\.? / && !is_special_entry($entry);
-}
-
-sub is_volume($) {
-    my ($entry) = @_;
-    !is_special_entry($entry) && $entry->{attributes} & $VOLUME_LABEL_ATTR;
-}
-
-sub is_file($) {
-    my ($entry) = @_;
-    !is_special_entry($entry) && !is_directory($entry) && !is_volume($entry) && $entry->{length};
-}
-
-
-sub is_special_entry($) {
-    my ($entry) = @_;
-    my ($c) = unpack "C", $entry->{name};
-
-    #- skip empty slots, deleted files, and 0xF6?? (taken from kernel)
-    $c == 0 || $c == $DELETED_FLAG || $c == 0xF6 and return 1;
-
-    $entry->{attributes} == $VFAT_ATTR and return 1;
-    0;
-}
-
-
-#- return true if entry has been modified
-#- curr_dir_name is added to contains current directory name, "" for root.
-sub remap {
-    my ($curr_dir_name, $entry) = @_;
-
-    is_special_entry($entry) and return;
-
-    my $cluster = get_cluster($entry);
-    my $new_cluster = resize_fat::c_rewritten::fat_remap($cluster);
-
-    #-print "remapping cluster ", get_cluster($entry), " to $new_cluster";
-
-    $new_cluster == $cluster and return; #- no need to modify
-
-    set_cluster($entry, $new_cluster);
-    1;
-}
diff --git a/perl-install/resize_fat/directory.pm b/perl-install/resize_fat/directory.pm
deleted file mode 100644
index 1f2b1ede6..000000000
--- a/perl-install/resize_fat/directory.pm
+++ /dev/null
@@ -1,79 +0,0 @@
-package resize_fat::directory; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::dir_entry;
-use resize_fat::io;
-
-
-my $format = "a8 a3 C C C S7 I";
-my @fields = (
-    'name',
-    'extension',
-    'attributes',
-    'is_upper_case_name',
-    'creation_time_low',	#- milliseconds
-    'creation_time_high',
-    'creation_date',
-    'access_date',
-    'first_cluster_high',	#- for FAT32
-    'time',
-    'date',
-    'first_cluster',
-    'length',
-);
-my $psizeof_format = psizeof($format);
-
-1;
-
-sub entry_size { $psizeof_format }
-
-#- call `f' for each entry of the directory
-#- if f return true, then modification in the entry are taken back
-sub traverse($$$) {
-    my ($directory, $curr_dir_name, $f) = @_;
-
-    for (my $i = 0;; $i++) {
-	my $raw = \substr($directory, $i * $psizeof_format, $psizeof_format);
-
-	#- empty entry means end of directory
-	$$raw =~ /^\0*$/ and return $directory;
-
-	my $entry; @{$entry}{@fields} = unpack $format, $$raw;
-
-	&$f($curr_dir_name, $entry)
-	    and	$$raw = pack $format, @{$entry}{@fields};
-    }
-    $directory;
-}
-
-sub traverse_all($$) {
-    my ($fs, $f) = @_;
-
-    my $traverse_all; $traverse_all = sub {
-	my ($curr_dir_name, $entry) = @_;
-
-	&$f($curr_dir_name, $entry);
-
-        resize_fat::dir_entry::is_directory($entry)
-	    and traverse(resize_fat::io::read_file($fs, resize_fat::dir_entry::get_cluster($entry)), "$curr_dir_name/$entry->{name}", $traverse_all);
-
-	undef; #- no need to write back (cf traverse)
-    };
-
-    my $directory = $resize_fat::isFAT32 ?
-	resize_fat::io::read_file($fs, $fs->{fat32_root_dir_cluster}) :
-	resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size});
-    traverse($directory, "", $traverse_all);
-    undef $traverse_all; #- circular reference is no good for perl's poor GC :(
-}
-
-
-#- function used by construct_dir_tree to translate the `cluster' fields in each
-#- directory entry
-sub remap($$) {
-    my ($fs, $directory) = @_;
-    traverse($directory, "", \&resize_fat::dir_entry::remap);
-}
diff --git a/perl-install/resize_fat/fat.pm b/perl-install/resize_fat/fat.pm
deleted file mode 100644
index 31643f0a3..000000000
--- a/perl-install/resize_fat/fat.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package resize_fat::fat; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::any;
-use resize_fat::io;
-use resize_fat::c_rewritten;
-
-1;
-
-sub read($) {
-    my ($fs) = @_;
-
-    resize_fat::c_rewritten::read_fat(fileno $fs->{fd}, $fs->{fat_offset}, $fs->{fat_size}, $fs->{media});
-
-    @{$fs->{clusters}{count}}{qw(free bad used)} =
-      resize_fat::c_rewritten::scan_fat($fs->{nb_clusters}, $fs->{fs_type_size});
-}
-
-sub write($) {
-    my ($fs) = @_;
-
-    sysseek $fs->{fd}, $fs->{fat_offset}, 0 or die "write_fat: seek failed";
-    foreach (1..$fs->{nb_fats}) {
-	resize_fat::c_rewritten::write_fat(fileno $fs->{fd}, $fs->{fat_size});
-    }
-}
-
-
-
-#- allocates where all the clusters will be moved to. Clusters before cut_point
-#- remain in the same position, however cluster that are part of a directory are
-#- moved regardless (this is a mechanism to prevent data loss) (cut_point is the
-#- first cluster that won't occur in the new fs)
-sub allocate_remap {
-    my ($fs, $cut_point) = @_;
-    my ($cluster, $new_cluster);
-    my $remap = sub { resize_fat::c_rewritten::set_fat_remap($cluster, $new_cluster) };
-    my $get_new = sub {
-	$new_cluster = get_free($fs);
-	0 < $new_cluster && $new_cluster < $cut_point or die "no free clusters";
-	set_eof($fs, $new_cluster); #- mark as used
-	#-log::ld("resize_fat: [$cluster,", &next($fs, $cluster), "...]->$new_cluster...");
-    };
-
-    #- this must call allocate_fat_remap that zeroes the buffer allocated.
-    resize_fat::c_rewritten::allocate_fat_remap($fs->{nb_clusters} + 2);
-
-    $fs->{last_free_cluster} = 2;
-    for ($cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	if ($cluster < $cut_point) {
-	    if (resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY) {
-		&$get_new();
-	    } else {
-		$new_cluster = $cluster;
-	    }
-	    &$remap();
-	} elsif (!is_empty(&next($fs, $cluster))) {
-	    &$get_new();
-	    &$remap();
-	 }
-    }
-}
-
-
-#- updates the fat for the resized filesystem
-sub update {
-    my ($fs) = @_;
-
-    for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	 if (resize_fat::c_rewritten::flag($cluster)) {
-	     my $old_next = &next($fs, $cluster);
-	     my $new      = resize_fat::c_rewritten::fat_remap($cluster);
-	     my $new_next = resize_fat::c_rewritten::fat_remap($old_next);
-
-	     set_available($fs, $cluster);
-
-	     is_eof($old_next) ?
-		 set_eof($fs, $new) :
-		 set_next ($fs, $new, $new_next);
-	 }
-    }
-}
-
-
-sub endianness16($) { (($_[0] & 0xff) << 8) + ($_[0] >> 8); }
-sub endianness($$) {
-    my ($val, $nb_bits) = @_;
-    my $r = 0;
-    for (; $nb_bits > 0; $nb_bits -= 8) {
-	$r <<= 8;
-	$r += $val & 0xff;
-	$val >>= 8;
-    }
-    $nb_bits < 0 and die "error: endianness only handle numbers divisible by 8";
-    $r;
-}
-
-*next = \&resize_fat::c_rewritten::next;
-*set_next = \&resize_fat::c_rewritten::set_next;
-
-
-
-sub get_free($) {
-    my ($fs) = @_;
-    foreach (my $i = 0; $i < $fs->{nb_clusters}; $i++) {
-        my $cluster = ($i + $fs->{last_free_cluster} - 2) % $fs->{nb_clusters} + 2;
-        is_available(&next($fs, $cluster)) and return $fs->{last_free_cluster} = $cluster;
-    }
-    die "no free clusters";
-}
-
-#-    returns true if <cluster> represents an EOF marker
-sub is_eof($) {
-    my ($cluster) = @_;
-    $cluster >= $resize_fat::bad_cluster_value;
-}
-sub set_eof($$) {
-    my ($fs, $cluster) = @_;
-    set_next ($fs, $cluster, $resize_fat::bad_cluster_value + 1);
-}
-
-#-    returns true if <cluster> is empty.  Note that this includes bad clusters.
-sub is_empty($) {
-    my ($cluster) = @_;
-    $cluster == 0 || $cluster == $resize_fat::bad_cluster_value;
-}
-
-#-    returns true if <cluster> is available.
-sub is_available($) {
-    my ($cluster) = @_;
-    $cluster == 0;
-}
-sub set_available($$) {
-    my ($fs, $cluster) = @_;
-    set_next ($fs, $cluster, 0);
-}
diff --git a/perl-install/resize_fat/info_sector.pm b/perl-install/resize_fat/info_sector.pm
deleted file mode 100644
index 35449cedc..000000000
--- a/perl-install/resize_fat/info_sector.pm
+++ /dev/null
@@ -1,37 +0,0 @@
-package resize_fat::info_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a484 I I I a16";
-my @fields = (
-    'unused',
-    'signature',		#- should be 0x61417272
-    'free_clusters',		#- -1 for unknown
-    'next_cluster',		#- most recently allocated cluster
-    'unused2',
-);
-
-1;
-
-
-sub read($) {
-    my ($fs) = @_;
-    my $info = resize_fat::io::read($fs, $fs->{info_offset}, psizeof($format));
-    @{$fs->{info_sector}}{@fields} = unpack $format, $info;
-    $fs->{info_sector}{signature} == 0x61417272 or die "Invalid information sector signature\n";
-}
-
-sub write($) {
-    my ($fs) = @_;
-    $fs->{info_sector}{free_clusters} = $fs->{clusters}->{count}->{free};
-    $fs->{info_sector}{next_cluster} = 2;
-
-    my $info = pack $format, @{$fs->{info_sector}}{@fields};
-
-    resize_fat::io::write($fs, $fs->{info_offset}, psizeof($format), $info);
-}
diff --git a/perl-install/resize_fat/io.pm b/perl-install/resize_fat/io.pm
deleted file mode 100644
index 7643a0953..000000000
--- a/perl-install/resize_fat/io.pm
+++ /dev/null
@@ -1,71 +0,0 @@
-package resize_fat::io; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::fat;
-use c;
-
-1;
-
-
-sub read($$$) {
-    my ($fs, $pos, $size) = @_;
-    print "reading $size bytes at $pos\n";
-    my $buf = "\0" x $size;
-    sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    sysread $fs->{fd}, $buf, $size or die "reading at byte #$pos failed on device $fs->{fs_name}";
-    $buf;
-}
-sub write($$$$) {
-    my ($fs, $pos, $size, $buf) = @_;
-    sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf or die "writing at byte #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_cluster($$) {
-    my ($fs, $cluster) = @_;
-    my $buf;
-    my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
-    c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
-    sysread $fs->{fd}, $buf, $fs->{cluster_size} or die "reading at sector #$pos failed on device $fs->{fs_name}";
-    $buf;
-}
-sub write_cluster($$$) {
-    my ($fs, $cluster, $buf) = @_;
-    my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
-    c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf or die "writing at sector #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_file($$) {
-    my ($fs, $cluster) = @_;
-    my $buf = '';
-
-    for (; !resize_fat::fat::is_eof($cluster); $cluster = resize_fat::fat::next ($fs, $cluster)) {
-	$cluster == 0 and die "Bad FAT: unterminated chain\n";
-	$buf .= read_cluster($fs, $cluster);
-    }
-    $buf;
-}
-
-sub check_mounted($) {
-    my ($f) = @_;
-
-    local *F;
-    open F, "/proc/mounts" or die "error opening /proc/mounts\n";
-    foreach (<F>) {
-	/^$f\s/ and die "device is mounted";
-    }
-}
-
-sub open($) {
-    my ($fs) = @_;
-
-    check_mounted($fs->{device});
-
-    sysopen F, $fs->{fs_name}, 2 or sysopen F, $fs->{fs_name}, 0 or die "error opening device $fs->{fs_name} for writing\n";
-    $fs->{fd} = *F;
-}
diff --git a/perl-install/resize_fat/main.pm b/perl-install/resize_fat/main.pm
deleted file mode 100644
index 81dfb6b3f..000000000
--- a/perl-install/resize_fat/main.pm
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/usr/bin/perl
-
-# DiskDrake
-# Copyright (C) 1999 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# This is mainly a perl rewrite of the work of Andrew Clausen (libresize)
-
-package resize_fat::main; # $Id$
-
-use diagnostics;
-use strict;
-
-use log;
-use common;
-use MDK::Common::System;
-use resize_fat::boot_sector;
-use resize_fat::info_sector;
-use resize_fat::directory;
-use resize_fat::io;
-use resize_fat::fat;
-use resize_fat::any;
-
-
-1;
-
-#- - reads in the boot sector/partition info., and tries to make some sense of it
-sub new($$$) {
-    my ($type, $device, $fs_name) = @_;
-    my $fs = { device => $device, fs_name => $fs_name } ;
-
-    eval {
-	resize_fat::io::open($fs);
-	resize_fat::boot_sector::read($fs);
-	$resize_fat::isFAT32 and eval { resize_fat::info_sector::read($fs) };
-	resize_fat::fat::read($fs);
-	resize_fat::any::flag_clusters($fs);
-    };
-    if ($@) {
-	close $fs->{fd};
-	die;
-    }
-    bless $fs, $type;
-}
-
-sub DESTROY {
-    my ($fs) = @_;
-    close $fs->{fd};
-    resize_fat::c_rewritten::free_all();
-}
-
-#- copy all clusters >= <start_cluster> to a new place on the partition, less
-#- than <start_cluster>. Only copies files, not directories.
-#- (use of buffer needed because the seeks slow like hell the hard drive)
-sub copy_clusters {
-    my ($fs, $cluster) = @_;
-    my @buffer;
-    my $flush = sub {
-	while (@buffer) {
-	    my $cluster = shift @buffer;
-	    resize_fat::io::write_cluster($fs, $cluster, shift @buffer);
-	}
-    };
-    for (; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::FILE or next;
-	push @buffer, 
-	  resize_fat::c_rewritten::fat_remap($cluster), 
-	  resize_fat::io::read_cluster($fs, $cluster);
-	@buffer > 50 and &$flush();
-    }
-    &$flush();
-}
-
-#- Constructs the new directory tree to match the new file locations.
-sub construct_dir_tree {
-    my ($fs) = @_;
-
-    if ($resize_fat::isFAT32) {
-	#- fat32's root must remain in the first 64k clusters
-	#- so don't set it as DIRECTORY, it will be specially handled
-	resize_fat::c_rewritten::set_flag($fs->{fat32_root_dir_cluster}, $resize_fat::any::FREE);
-    }
-
-    for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY or next;
-
-      resize_fat::io::write_cluster($fs,
-				    resize_fat::c_rewritten::fat_remap($cluster),
-				    resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
-    }
-
-    MDK::Common::System::sync();
-
-    #- until now, only free clusters have been written. it's a null operation if we stop here.
-    #- it means no corruption :)
-    #
-    #- now we must be as fast as possible!
-
-    #- remapping non movable root directory
-    if ($resize_fat::isFAT32) {
-	my $cluster = $fs->{fat32_root_dir_cluster};
-
-	resize_fat::io::write_cluster($fs,
-		      resize_fat::c_rewritten::fat_remap($cluster),
-		      resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
-    } else {
-	resize_fat::io::write($fs, $fs->{root_dir_offset}, $fs->{root_dir_size},
-			      resize_fat::directory::remap($fs, resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size})));
-    }
-}
-
-sub min_size($) { &resize_fat::any::min_size }
-sub max_size($) { &resize_fat::any::max_size }
-sub used_size($) { &resize_fat::any::used_size }
-
-#- resize
-#- - size is in sectors
-#- - checks boundaries before starting
-#- - copies all data beyond new_cluster_count behind the frontier
-sub resize {
-    my ($fs, $size) = @_;
-
-    my ($min, $max) = (min_size($fs), max_size($fs));
-
-    $size += $min if $size =~ /^\+/;
-
-    $size >= $min or die "Minimum filesystem size is $min sectors";
-    $size <= $max or die "Maximum filesystem size is $max sectors";
-
-    log::l("resize_fat: Partition size will be ". ($size * $SECTORSIZE >> 20) ."Mb (well exactly ${size} sectors)");
-
-    my $new_data_size = $size * $SECTORSIZE - $fs->{cluster_offset};
-    my $new_nb_clusters = divide($new_data_size, $fs->{cluster_size});
-    my $used_size = used_size($fs);
-
-    log::l("resize_fat: Break point for moving files is ". ($used_size * $SECTORSIZE >> 20) ." Mb ($used_size sectors)");
-    if ($size < $used_size) {
-	log::l("resize_fat: Allocating new clusters");
-	resize_fat::fat::allocate_remap($fs, $new_nb_clusters);
-
-	log::l("resize_fat: Copying files");
-	copy_clusters($fs, $new_nb_clusters);
-
-	log::l("resize_fat: Copying directories");
-	construct_dir_tree($fs);
-
-	log::l("Writing new FAT...");
-	resize_fat::fat::update($fs);
-	resize_fat::fat::write($fs);
-    } else {
-	log::l("resize_fat: Nothing need to be moved");
-    }
-
-    $fs->{nb_sectors} = $size;
-    $fs->{nb_clusters} = $new_nb_clusters;
-    $fs->{clusters}{count}->{free} =
-      $fs->{nb_clusters} - $fs->{clusters}{count}->{used} - $fs->{clusters}->{count}->{bad} - 2;
-
-    $fs->{system_id} = 'was here!';
-    $fs->{small_nb_sectors} = 0;
-    $fs->{big_nb_sectors} = $size;
-
-    log::l("resize_fat: Writing new boot sector...");
-
-    resize_fat::boot_sector::write($fs);
-
-    $resize_fat::isFAT32 and eval { resize_fat::info_sector::write($fs) }; #- doesn't matter if this fails - its pretty useless!
-
-    MDK::Common::System::sync();
-    close $fs->{fd};
-    log::l("resize_fat: done");
-}
-
diff --git a/perl-install/run_program.pm b/perl-install/run_program.pm
deleted file mode 100644
index 2db504bec..000000000
--- a/perl-install/run_program.pm
+++ /dev/null
@@ -1,68 +0,0 @@
-package run_program; # $Id$
-
-use diagnostics;
-use strict;
-
-use log;
-
-1;
-
-sub run_or_die {
-    my ($name, @args) = @_;
-    run($name, @args) or die "$name failed\n";
-}
-sub rooted_or_die {
-    my ($root, $name, @args) = @_;
-    rooted($root, $name, @args) or die "$name failed\n";
-}
-sub run { rooted('', @_) }
-
-sub rooted {
-    my ($root, $name, @args) = @_;
-    my $str = ref $name ? $name->[0] : $name;
-    log::l("running: $str @args" . ($root ? " with root $root" : ""));
-
-    return 1 if $root && $<;
-
-    $root ? $root .= '/' : ($root = '');
-    install_any::check_prog (ref $name ? $name->[0] : $name) if !$root && $::isInstall;
-
-    if (my $pid = fork) {
-	waitpid $pid, 0;
-	return $? == 0;
-    }
-    {
-	my ($stdout, $stdoutm, $stderr, $stderrm);
-	($stdoutm, $stdout, @args) = @args if $args[0] =~ /^>>?$/;
-	($stderrm, $stderr, @args) = @args if $args[0] =~ /^2>>?$/;
-
-	if ($stderr) {
-	    $stderrm =~ s/2//;
-	    open STDERR, "$stderrm $root$stderr" or die "run_program can't output in $root$stderr (mode `$stderrm')";
-	} elsif ($::isInstall) {
-	    open STDERR, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die "run_program can't log, give me access to /tmp/ddebug.log";
-	}
-	if ($stdout) {
-	    open STDOUT, "$stdoutm $root$stdout" or die "run_program can't output in $root$stdout (mode `$stdoutm')";
-	} elsif ($::isInstall) {
-	    open STDOUT, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die "run_program can't log, give me access to /tmp/ddebug.log";
-	}
-
-	$root and chroot $root;
-	chdir "/";
-
-	if (ref $name) {
-	    unless (exec { $name->[0] } $name->[1], @args) {
-		log::l("exec of $name->[0] failed: $!");
-		c::_exit(128);
-	    }
-	} else {
-	    unless (exec $name, @args) {
-		log::l("exec of $name failed: $!");
-		c::_exit(128);
-	    }
-
-	}
-    }
-
-}
diff --git a/perl-install/sbus_probing/main.pm b/perl-install/sbus_probing/main.pm
deleted file mode 100644
index 4aed43459..000000000
--- a/perl-install/sbus_probing/main.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package sbus_probing::main; # $Id$
-
-use c;
-use log;
-use common;
-use modules;
-
-my %sbus_table_network = (
-			  hme    => [ "Sun Happy Meal Ethernet", "sunhme" ],
-			  le     => [ "Sun Lance Ethernet", "ignore:lance" ],
-			  qe     => [ "Sun Quad Ethernet", "sunqe" ],
-			  mlanai => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
-			  myri   => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
-			 );
-my %sbus_table_scsi =    (
-			  soc   => [ "Sun SPARCStorage Array", "fc4:soc:pluto" ],
-			  socal => [ "Sun Enterprise Network Array", "fc4:socal:fcal" ],
-			  esp   => [ "Sun Enhanced SCSI Processor (ESP)", "ignore:esp" ],
-			  fas   => [ "Sun Swift (ESP)", "ignore:esp" ],
-			  ptisp => [ "Performance Technologies ISP", "qlogicpti" ],
-			  isp   => [ "QLogic ISP", "qlogicpti" ],
-			 );
-my %sbus_table_audio =   (
-			  audio      => [ "AMD7930", "amd7930" ],
-			  CS4231     => [ "CS4231 APC DMA (SBUS)", "cs4231" ],
-			  CS4231_PCI => [ "CS4231 EB2 DMA (PCI)", "cs4231" ],
-			 );
-my %sbus_table_video =   (
-			  bwtwo         => [ "Sun|Monochrome (bwtwo)", "Server:SunMono" ],
-			  cgthree       => [ "Sun|Color3 (cgthree)", "Server:Sun" ],
-			  cgeight       => [ "Sun|CG8/RasterOps", "Server:Sun" ],
-			  cgtwelve      => [ "Sun|GS (cgtwelve)", "Server:Sun24" ],
-			  gt            => [ "Sun|Graphics Tower", "Server:Sun24" ],
-			  mgx           => [ "Sun|Quantum 3D MGXplus", "Server:Sun24" ],
-			  mgx_4M        => [ "Sun|Quantum 3D MGXplus with 4M VRAM", "Server:Sun24" ],
-			  cgsix         => [ "Sun|Unknown GX", "Server:Sun" ],
-			  cgsix_dbl     => [ "Sun|Double Width GX", "Server:Sun" ],
-			  cgsix_sgl     => [ "Sun|Single Width GX", "Server:Sun" ],
-			  cgsix_t1M     => [ "Sun|Turbo GX with 1M VSIMM", "Server:Sun" ],
-			  cgsix_tp      => [ "Sun|Turbo GX Plus", "Server:Sun" ],
-			  cgsix_t       => [ "Sun|Turbo GX", "Server:Sun" ],
-			  cgfourteen    => [ "Sun|SX", "Server:Sun24" ],
-			  cgfourteen_4M => [ "Sun|SX with 4M VSIMM", "Server:Sun24" ],
-			  cgfourteen_8M => [ "Sun|SX with 8M VSIMM", "Server:Sun24" ],
-			  leo           => [ "Sun|ZX or Turbo ZX", "Server:Sun24" ],
-			  leo_t         => [ "Sun|Turbo ZX", "Server:Sun24" ],
-			  tcx           => [ "Sun|TCX (S24)", "Server:Sun24" ],
-			  tcx_8b        => [ "Sun|TCX (8bit)", "Server:Sun" ],
-			  afb           => [ "Sun|Elite3D", "Server:Sun24" ],
-			  afb_btx03     => [ "Sun|Elite3D-M6 Horizontal", "Server:Sun24" ],
-			  ffb           => [ "Sun|FFB", "Server:Sun24" ],
-			  ffb_btx08     => [ "Sun|FFB 67Mhz Creator", "Server:Sun24" ],
-			  ffb_btx0b     => [ "Sun|FFB 67Mhz Creator 3D", "Server:Sun24" ],
-			  ffb_btx1b     => [ "Sun|FFB 75Mhz Creator 3D", "Server:Sun24" ],
-			  ffb_btx20     => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
-			  ffb_btx28     => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
-			  ffb_btx23     => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx2b     => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx30     => [ "Sun|FFB2+ Vertical Creator", "Server:Sun24" ],
-			  ffb_btx33     => [ "Sun|FFB2+ Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx40     => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
-			  ffb_btx48     => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
-			  ffb_btx43     => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
-			  ffb_btx4b     => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
-			 );
-
-1;
-
-sub prom_getint($) { unpack "I", c::prom_getproperty($_[0]) }
-
-#- update $@sbus_probed according to SBUS detection.
-sub prom_walk($$$$) {
-    my ($sbus_probed, $node, $sbus, $ebus) = @_;
-    my ($prob_name, $prob_type) = (c::prom_getstring("name"), c::prom_getstring("device_type"));
-    my ($nextnode, $nsbus, $nebus) = (undef, $sbus, $ebus);
-
-    #- probe for network devices.
-    if ($sbus && $prob_type eq 'network') {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	$sbus_table_network{$prob_name} and push @$sbus_probed, [ "NETWORK", @{$sbus_table_network{$prob_name}} ];
-	#- TODO for Sun Quad Ethernet (qe)
-    }
-
-    #- probe for scsi devices.
-    if ($sbus && ($prob_type eq 'scsi' || $prob_name =~ /^(soc|socal)$/)) {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	$sbus_table_scsi{$prob_name} and push @$sbus_probed, [ "SCSI", @{$sbus_table_scsi{$prob_name}} ];
-    }
-
-    #- probe for audio devices, there are no type to check here.
-    if ($sbus_table_audio{$prob_name}) {
-	$prob_name =~ /,/ and $prob_name =~ s/[A-Z,]*(.*)/$1/;
-	my $ext = $prob_name eq 'CS4231' && $ebus && "_PCI";
-	$sbus_table_audio{$prob_name . $ext} ?
-	    push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name . $ext}} ] :
-	    push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name}} ];
-    }
-
-    #- probe for video devices.
-    if ($prob_type eq 'display' && ($sbus || $prob_name =~ /^(ffb|afb|cgfourteen)$/)) {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	my $ext = ($prob_name eq 'mgx' && prom_getint('fb_size') == 0x400000 && '_4M' ||
-		   $prob_name eq 'cgsix' && do {
-		       my ($chiprev, $vmsize) = (prom_getint('chiprev'), prom_getint('vmsize'));
-		       my $result = '';
-		       $chiprev >= 1 && $chiprev <= 4 and $result = '_dbl';
-		       $chiprev >= 5 && $chiprev <= 9 and $result = '_sgl';
-		       $chiprev == 11 && $vmsize == 2 and $result = '_t1M';
-		       $chiprev == 11 && $vmsize == 4 and $result = '_tp';
-		       $chiprev == 11 && !$result and $result = '_t';
-		       $result;
-		   } ||
-		   $prob_name eq 'leo' && c::prom_getstring('model') =~ /501-2503/ && '_t' ||
-		   $prob_name eq 'tcx' && c::prom_getbool('tcx-8-bit') && '_8b' ||
-		   $prob_name eq 'afb' && sprintf "_btx%x", prom_getint('board_type') ||
-		   $prob_name eq 'ffb' && sprintf "_btx%x", prom_getint('board_type'));
-
-	$sbus_table_video{$prob_name . $ext} ?
-	    push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name . $ext}} ] :
-	    push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name}} ];
-    }
-
-    #- parse prom tree.
-    $prob_name eq 'sbus' || $prob_name eq 'sbi' and $nsbus = 1;
-    $prob_name eq 'ebus' and $nebus = 1;
-    $nextnode = c::prom_getchild($node) and prom_walk($sbus_probed, $nextnode, $nsbus, $nebus);
-    $nextnode = c::prom_getsibling($node) and prom_walk($sbus_probed, $nextnode, $sbus, $ebus);
-}
-
-sub probe {
-    eval { modules::load("openprom") } if arch() =~ /sparc/;
-    my $root_node = c::prom_open();
-    my @l;
-
-    prom_walk(\@l, $root_node, 0, 0);
-    c::prom_close();
-    map { my %l; @l{qw(type description drivers)} = @$_ } @l;
-}
diff --git a/perl-install/scanner.pm b/perl-install/scanner.pm
deleted file mode 100755
index 0e67eb02e..000000000
--- a/perl-install/scanner.pm
+++ /dev/null
@@ -1,227 +0,0 @@
-package scanner;
-# scanner.pm $Id$
-# Yves Duret <yduret at mandrakesoft.com>
-# Copyright (C) 2001 MandrakeSoft
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# pbs/TODO:
-# - no scsi support
-# - devfs use dev_is_devfs()
-# - with 2 scanners same manufacturer -> will overwrite previous conf -> only 1 conf !!
-# - lp: see printerdrake
-# - install: prefix --> done
-
-use standalone;
-use common;
-use detect_devices;
-
-
-my $_sanedir = "$prefix/etc/sane.d";
-my $_scannerDBdir = "$prefix$ENV{SHARE_PATH}/ldetect-lst";
-$scannerDB = readScannerDB("$_scannerDBdir/ScannerDB");
-
-sub confScanner {
-    my ($model, $port) = @_;
-    $port = detect_devices::dev_is_devfs() ? "$prefix/dev/usb/scanner0" : "$prefix/dev/scanner" if (!$port);
-    my $a = $scannerDB->{$model}{server};
-    #print "file:[$a]\t[$model]\t[$port]\n| ", (join "\n| ", @{$scannerDB->{$model}{lines}}),"\n";
-    output("$_sanedir/$a.conf", (join "\n",@{$scannerDB->{$model}{lines}}));
-    substInFile {s/\$DEVICE/$port/} "$_sanedir/$a.conf";
-    add2dll($a);
-}
-
-sub add2dll {
-    return if member($_[0], chomp_(cat_("$_sanedir/dll.conf")));
-    local *F;
-    open F, ">>$_sanedir/dll.conf" or die "can't write SANE config in $_sanedir/dll.conf: $!";
-    print F $_[0];
-    close F;
-}
-
-sub findScannerUsbport {
-    my ($i, $elem, @res) = (0, {});
-    foreach (grep { $_->{driver} =~ /scanner/ } detect_devices::usb_probe()) {
-	#my ($manufacturer, $model) = split '\|', $_->{description};
-	#$_->{description} =~ s/Hewlett[-\s_]Packard/HP/;
-	push @res, { port => "/dev/usb/scanner$i", val => { #CLASS => 'SCANNER',
-							    #MODEL => $model,
-							    #MANUFACTURER => $manufacturer,
-							    DESCRIPTION => $_->{description},
-							    #id => $_->{id},
-							    #vendor => $_->{vendor},
-							  }};
-	++$i;
-    }
-    @res;
-}
-
-
-sub findScannerScsi {
-
-}
-
-sub readScannerDB {
-    my ($file) = @_;
-    my ($card, %cards);
-
-    my $F = common::openFileMaybeCompressed($file);
-
-    my ($lineno, $cmd, $val) = 0;
-    my $fs = {
-        LINE => sub { push @{$card->{lines}}, $val },
-	NAME => sub {
-	    $cards{$card->{type}} = $card if ($card and !$card->{flags}{unsupported});
-	    $card = { type => $val };
-	},
-	SEE => sub {
-	    my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
-
-	    push @{$card->{lines}}, @{$c->{lines} || []};
-	    add2hash($card->{flags}, $c->{flags});
-	    add2hash($card, $c);
-	},
-	ASK => sub { $card->{ask} = $val; },
-	SERVER => sub { $card->{server} = $val; },
-	DRIVER => sub { $card->{driver} = $val; },
-	UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 },
-	COMMENT => sub {},
-    };
-
-    local $_;
-    while (<$F>) { $lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-	/^END/ and do { $cards{$card->{type}} = $card if $card; last };
-	($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next;
-	my $f = $fs->{$cmd};
-	$f ? $f->() : log::l("unknown line $lineno ($_)");
-    }
-    \%cards;
-}
-
-sub updateScannerDBfromUsbtable {
-    substInFile {s/END//} "ScannerDB";
-    local *F;
-    open F, ">>ScannerDB" or die "can't write ScannerDB config in ScannerDB: $!";
-    print F "# generated from usbtable by scannerdrake\n";
-    foreach (cat_("$ENV{SHARE_PATH}/ldetect-lst/usbtable")) {
-	my ($vendor_id, $product_id, $mod, $name) = chomp_(split /\s/,$_,4);
-	next unless ($mod eq "\"scanner\"");
-	$name =~ s/\"(.*)\"$/$1/;
-	if (member($name, keys %$scanner::scannerDB)) {
-	    print "#[$name] already in ScannerDB!\n";
-	    next;
-	}
-	print F "NAME $name\nDRIVER usb\nCOMMENT usb $vendor_id $product_id\nUNSUPPORTED\n\n";
-    }
-    print F "END\n";
-    close F;
-}
-
-sub updateScannerDBfromSane {
-    my ($_sanesrcdir) = @_;
-    substInFile {s/END//} "ScannerDB";
-
-    local *Y;
-    open Y, ">>ScannerDB" or die "can't write ScannerDB config in ScannerDB: $!";
-    print Y "# generated from Sane by scannerdrake\n";
-    # for compat with our usbtable
-    my $sane2DB = { 
-		   "Acer" => "Acer Peripherals Inc.",
-		   "AGFA" => "AGFA-Gevaert NV",
-		   "Agfa" => "AGFA-Gevaert NV",
-		   "Epson" => "Seiko Epson Corp.",
-		   "Fujitsu Computer Products of America" => "Fujitsu",
-		   "HP" => sub {$_[0] =~ s/HP\s/Hewlett-Packard|/; $_[0] =~ s/HP4200/Hewlett-Packard|ScanJet 4200C/; $_[0];},
-		   "Hewlett-Packard" => sub {$_[0] =~ s/HP 3200 C/Hewlett-Packard|ScanJet 3200C/; $_[0];},
-		   "Kodak" => "Kodak Co.",
-		   "Mustek" => "Mustek Systems Inc.",
-		   "NEC" => "NEC Systems",
-		   "Nikon" => "Nikon Corp.",
-		   "Plustek" => "Plustek, Inc.",
-		   "Primax" => "Primax Electronics",
-		   "Siemens" => "Siemens Information and Communication Products",
-		   "Trust" => "Trust Technologies",
-		   "UMAX" => "Umax",
-		   "Vobis/Highscreen" => "Vobis",
-		  };
-    
-    opendir YREP, $_sanesrcdir or die "can't open $_sanesrcdir: $!";
-    @files = grep /.*desc$/, readdir YREP;
-    closedir YREP;
-    foreach $i (@files) {
-	my $F = common::openFileMaybeCompressed("$_sanesrcdir/$i");
-	print Y "\n# from $i";
-	my ($lineno, $cmd, $val) = 0;
-	my ($name, $intf, $comment,$mfg);
-	my $fs = {
-		  backend => sub {$backend = $val;},
-		  mfg => sub {$mfg = $val; $name=undef;},#bug when a new mfg comes. should called $fs->{$name}(); but ??
-		  model => sub {
-		      unless ($name) {$name = $val; next;}
-		      $name = (member($mfg, keys %$sane2DB))
-			? (ref $sane2DB->{$mfg}) ? $sane2DB->{$mfg}($name) : "$sane2DB->{$mfg}|$name" : "$mfg|$name";
-		      if (member($name, keys %$scanner::scannerDB)) {
-			  print "#[$name] already in ScannerDB!\n";
-		      } else {
-			  print Y "\nNAME $name\nSERVER $backend\nDRIVER $intf\n";
-			  print Y "COMMENT $comment\n" if ($comment);
-			  $comment = undef; 
-		      }
-		      $name = $val;
-		  },
-		  interface => sub {$intf = $val;},
-		  comment => sub {$comment = $val;},
-		 };
-	local $_;
-	while (<$F>) { $lineno++;
-		       s/\s+$//;
-		       /^\;/ and next;
-		       ($cmd, $val) = /:(\S+)\s*\"([^\;]*)\"/ or next; #log::l("bad line $lineno ($_)"), next;
-		       my $f = $fs->{$cmd};
-		       $f ? $f->() : log::l("unknown line $lineno ($_)");
-		   }
-	$fs->{model}(); # the last one
-    }
-    print Y "\nEND\n";
-    close Y;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
-#-----------------------------------------------
-# $Log$
-# Revision 1.7  2002/07/08 08:34:51  tvignaud
-# this doesn't need either "#!/usr/bin/perl" nor "use lib qw(/usr/lib/libDrakX);"
-#
-# Revision 1.6  2002/03/10 15:26:00  yduret
-# added ASK support for more interactiveness during configuration
-#
-# Revision 1.5  2002/02/18 17:34:31  yduret
-# update
-#
-# Revision 1.4  2002/02/18 16:16:13  yduret
-# scsi parport preliminary support
-# no more show unsupported scanner
-# common output for ScannerDB update from sane *.desc files and from usbtable
-#
-# Revision 1.3  2001/11/12 15:18:02  yduret
-# update, sync with cvs
-#
diff --git a/perl-install/security/msec.pm b/perl-install/security/msec.pm
deleted file mode 100644
index 66800ef11..000000000
--- a/perl-install/security/msec.pm
+++ /dev/null
@@ -1,238 +0,0 @@
-package security::msec;
-
-use common;
-use log;
-
-sub get_user_list {
-   my @user_list = ();
-
-   open(PASSWD, "/etc/passwd");
-   while(<PASSWD>) {
-      my ($login_name, undef, $uid) = split(/:/,$_);
-      if($uid >= 500) { push(@user_list, $login_name); }
-   }
-   @user_list;
-}
-
-sub add_config {
-   my ($prefix, $config_option, @values) = @_;
-   my $tmp_file = "$prefix/etc/security/msec/level.local.tmp";
-   my $result = "";
-
-   $result = $config_option.'(';
-   foreach $value (@values) {
-      $result .= $value.',';
-   }
-   chop $result;
-   $result .= ')';
-
-   open(TMP_CONFIG, '>>'.$tmp_file);
-   print TMP_CONFIG "$result\n";
-   close TMP_CONFIG;
-}
-
-sub commit_changes {
-   my ($prefix) = $_;
-   my $tmp_file = "$prefix/etc/security/msec/level.local.tmp";
-   my $config_file = "$prefix/etc/security/msec/level.local";
-   my %config_data;
-   my $config_option = "";
-
-   open (TMP_CONFIG, $tmp_file);
-
-   if (!(-x $config_file)) {
-      open(CONFIG_FILE, '>'.$config_file);
-      print CONFIG_FILE "from mseclib import *\n\n";
-      while(<TMP_CONFIG>) { print CONFIG_FILE $_; }
-   }
-   else {
-      open(CONFIG_FILE, $config_file);
-      while(<CONFIG_FILE>) {
-         if($_ =~ /\(/) {
-            ($config_option, undef) = split(/\(/, $_);
-            (undef, $config_data{$config_option}) = split(/\(/, $_);
-	 }
-      }
-      close CONFIG_FILE;
-      
-      while(<TMP_CONFIG>) {
-	 ($config_option, undef) = split(/\(/, $_);
-	 (undef, $config_data{$config_option}) = split(/\(/, $_);
-      }
-
-      open(CONFIG_FILE, '>'.$config_file);
-      print CONFIG_FILE "from mseclib import *\n\n";
-      foreach $config_option (keys %config_data) {
-         print CONFIG_FILE $config_option.'('.$config_data{$config_option}.'\n';
-      }   
-   }
-
-   close CONFIG_FILE;
-   close TMP_CONFIG;
-
-   standalone::rm_rf($tmp_file);
-} 
-
-sub get_config {
-    my ($prefix, $security) = @_;
-
-    my (%net_options_defaults) = (
-       accept_bogus_error_responses => [ 0, 0, 0, 0, 1, 1 ],
-       accept_icmp_echo => [ 1, 1, 1, 1, 0, 0 ],
-       enable_ip_spoofing_protection => [ 0, 0, 0, 1, 1, 1 ],
-       enable_log_strange_packets => [ 0, 0, 0, 0, 1, 1 ] );
-
-    my (%user_options_defaults) = (
-       allow_autologin => [ 1, 1, 1, 0, 0, 0 ],
-       allow_issues => [ "ALL", "ALL", "ALL", "LOCAL", "LOCAL", "NONE" ],
-       allow_reboot => [ 1, 1, 1, 1, 0, 0 ],
-       allow_root_login => [ 1, 1, 1, 1, 0, 0 ],
-       allow_user_list => [ 1, 1, 1, 1, 0, 0 ],
-       enable_at_crontab => [ 1, 1, 1, 1, 0, 0 ],
-       enable_pam_wheel_for_su => [ 0, 0, 0, 0, 0, 0 ],
-       enable_password => [ 0, 1, 1, 1, 1, 1 ],
-       enable_sulogin => [ 0, 0, 0, 0, 1, 1 ],
-       password_aging => [ "99999,-1", "99999,-1", "99999,-1", "99999,-1", "60,-1", "30,-1" ],
-       password_length => [ "0,0,0", "0,0,0", "0,0,0", "0,0,0", "0,0,0", "0,0,0" ],
-       set_root_umask => [ "002", "002", "022", "022", "022", "077" ],
-       set_user_umask => [ "002", "002", "022", "022", "077", "077" ],
-       set_shell_history_size => [ "-1", "-1", "-1", "-1", "10", "10" ],
-       set_shell_timeout => [ "0", "0", "0", "0", "3600", "900" ] );
-
-    my (%server_options_defaults) = (
-       allow_x_connections => [ "ALL", "LOCAL", "LOCAL", "LOCAL", "LOCAL", "NONE" ],
-       authorize_services => [ "ALL", "ALL", "ALL", "ALL", "LOCAL", "NONE" ],
-       enable_libsafe => [ 0, 0, 0, 0, 0, 0 ] );
-
-    my (%net_options) = (
-       accept_bogus_error_responses => $net_options_defaults{accept_bogus_error_responses}[$security],
-       accept_icmp_echo => $net_options_defaults{accept_icmp_echo}[$security],
-       enable_ip_spoofing_protection => $net_options_defaults{enable_ip_spoofing_protection}[$security],
-       enable_log_strange_packets => $net_options_defaults{enable_log_strange_packets}[$security]
-    );
-
-    my (%net_options_matrix) = (
-       accept_bogus_error_responses => { label => _("Accept/Refuse bogus IPV4 error messages"),
-                                         val => \$net_options{accept_bogus_error_responses},
-					 type => "bool" },
-       accept_icmp_echo => { label => _("Accept/Refuse ICMP echo"),
-                             val => \$net_options{accept_icmp_echo},
-			     type => "bool" },
-       enable_ip_spoofing_protection => { label => _("Enable/Disable IP spoofing protection. If alert is true, also reports to syslog"),
-                                          val => \$net_options{enable_ip_spoofing_protection},
-					  type=> "bool" },
-       enable_log_strange_packets => { label => _("Enable/Disable the logging of IPv4 strange packets"),
-                                       val => \$net_options{enable_log_strange_packets},
-				       type => "bool" }
-    );
-
-    my (%user_options) = (
-       allow_autologin => $user_options_defaults{allow_autologin}[$security],
-       allow_issues => $user_options_defaults{allow_issues}[$security],
-       allow_reboot => $user_options_defaults{allow_reboot}[$security],
-       allow_root_login => $user_options_defaults{allow_root_login}[$security],
-       allow_user_list => $user_options_defaults{allow_user_list}[$security],
-       enable_at_crontab => $user_options_defaults{enable_at_crontab}[$security],
-       enable_pam_wheel_for_su => $user_options_defaults{enable_pam_wheel_for_su}[$security],
-       enable_password => $user_options_defaults{enable_password}[$security],
-       enable_sulogin => $user_options_defaults{enable_sulogin}[$security],
-       password_aging => $user_options_defaults{password_aging}[$security],
-       password_length => $user_options_defaults{password_length}[$security],
-       set_root_umask => $user_options_defaults{set_root_umask}[$security],
-       set_user_umask => $user_options_defaults{set_user_umask}[$security],
-       set_shell_history_size => $user_options_defaults{set_shell_history_size}[$security],
-       set_shell_timeout => $user_options_defaults{set_shell_timeout}[$security]
-    );
-
-    my (%user_options_matrix) = (
-       allow_autologin => { label => _("Allow/Forbid autologin"),
-                            val => \$user_options{allow_autologin},
-			    type => "bool" },
-       allow_issues => { label => _("Allow/Forbid pre-login message : If ALL, allow remote and local pre-login message (/etc/issue[.net]).\n If LOCAL, allow local pre-login message (/etc/issue). If NONE, disable pre-login message."),
-                         val => \$user_options{allow_issues},
-		         list => ["ALL", "LOCAL", "NONE"] },
-       allow_reboot => { label => _("Allow/Forbid reboot by the console user"),
-                         val => \$user_options{allow_reboot},
-                         type => "bool" },
-       allow_root_login => { label => _("Allow/Forbid direct root login"),
-                             val => \$user_options{allow_root_login},
-                             type => "bool" },
-       allow_user_list => { label => _("Allow/Forbid the list of users on the system in the display managers (kdm and gdm)"),
-                            val => \$user_options{allow_user_list},
-                            type => "bool" },
-       enable_at_crontab => { label => _("Enable/Disable crontab and at for users. Put allowed users in /etc/cron.allow\n and /etc/at.allow (see at(1) and crontab(1))"),
-                              val => \$user_options{enable_at_crontab},
-                              type => "bool" },
-       enable_pam_wheel_for_su => { label => _("Enable su only for members of the wheel group or allow su from any user"),
-                                    val => \$user_options{enable_pam_wheel_for_su},
-                                    type => "bool" },
-       enable_password => { label => _("Use password to authenticate users"),
-                            val => \$user_options{enable_password},
-                            type => "bool" },
-       enable_sulogin => { label => _("Enable/Disable sulogin in single user level (see sulogin(8))"),
-                           val => \$user_options{enable_sulogin},
-                           type => "bool" },
-       password_aging => { label => _("Set password aging to max days, Set delay before inactive\n (99999 to disable password aging, -1 to disable de-activation"),
-                           val => \$user_options{password_aging} },
-       password_length => { label => _("Set the password minimum length, the minimum number of digits and the minimum number of capitalized letters"),
-                            val => \$user_options{password_length} },
-       set_root_umask => { label => _("Set the root umask"),
-                           val => \$user_options{set_root_umask} },
-       set_user_umask => { label => _("Set the user umask"),
-                           val => \$user_options{set_user_umask} },
-       set_shell_history_size => { label => _("Set shell commands history size (-1 for unlimited)"),
-                                   val => \$user_options{set_shell_history_size} },
-       set_shell_timeout => { label => _("Set the shell timeout in seconds (0 for unlimited)"),
-                              val => \$user_options{set_shell_timeout} }
-    );
-
-    my (%server_options) = (
-       allow_x_connections => $server_options_defaults{allow_x_connections}[$security],
-       authorize_services => $server_options_defaults{authorize_services}[$security],
-       enable_libsafe => $server_options_defaults{enable_libsafe}[$security]
-    );
-
-    my (%server_options_matrix) = (
-       allow_x_connections => { label => ("Allow/Forbid X connections : If ALL, all connections allowed. If LOCAL, local connections allowed.\n If NONE, only console connections allowed"),
-                                val => \$server_options{allow_x_connections},
-                                list => [ "ALL", "LOCAL", "NONE" ] },
-       authorize_services => { label => _("Allow/Forbid services : If ALL, authorize all services. If LOCAL, authorize only local services.\n If NONE, disable all services. (see hosts.deny(5)). To authorize a service, see hosts.allow(5)."),
-                               val => \$server_options{authorize_services},
-                               list => [ "ALL", "LOCAL", "NONE" ] },
-       enable_libsafe => { label => _("Enable/Disable libsafe if it's installed on the system."),
-                           val => \$server_options{enable_libsafe},
-                           type => "bool" },
-   );
-
-   my $config_file = "$prefix/etc/security/msec/level.local";
-   my $values = "";
-   my $config_option = "";
-
-   open CONFIGFILE, $config_file;
-   while(<CONFIGFILE>) {
-       if($_ =~ /\(/) {
-           ($config_option, undef) = split(/\(/, $_);
-	   (undef, $values) = split(/\(/, $_);
-	   chop $values;
-
-	   if ($config_option ne "set_security_conf") {
-	       if ($net_options_matrix{$config_option}{description} eq "") {
-                   (undef, $net_options_matrix{$config_option}{value}) = $values;
-	       } elsif ($user_options_matrix{$config_option}{description} eq "") {
-                   (undef, $user_options_matrix{$config_option}{value}) = $values;
-	       } elsif ($server_options_matrix{$config_option}{description} eq "") {
-                   (undef, $server_options_matrix{$config_option}{value}) = $values;
-	       }
-	   }
-	   else {
-	       # TODO : Add code to handle set_security_conf
-	   }
-       }
-   }
-
-   close CONFIGFILE;
-
-   return (\%net_options_matrix, \%user_options_matrix, \%server_options_matrix);
-}
-
-1;
diff --git a/perl-install/services.pm b/perl-install/services.pm
deleted file mode 100644
index 0ddaaf79a..000000000
--- a/perl-install/services.pm
+++ /dev/null
@@ -1,288 +0,0 @@
-package services; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use run_program;
-
-sub description {
-    my %services = (
-alsa => __("Launch the ALSA (Advanced Linux Sound Architecture) sound system"),
-anacron => __("Anacron a periodic command scheduler."),
-apmd => __("apmd is used for monitoring batery status and logging it via syslog.
-It can also be used for shutting down the machine when the battery is low."),
-atd => __("Runs commands scheduled by the at command at the time specified when
-at was run, and runs batch commands when the load average is low enough."),
-crond => __("cron is a standard UNIX program that runs user-specified programs
-at periodic scheduled times. vixie cron adds a number of features to the basic
-UNIX cron, including better security and more powerful configuration options."),
-gpm => __("GPM adds mouse support to text-based Linux applications such the
-Midnight Commander. It also allows mouse-based console cut-and-paste operations,
-and includes support for pop-up menus on the console."),
-harddrake => __("HardDrake runs a hardware probe, and optionally configures
-new/changed hardware."),
-httpd => __("Apache is a World Wide Web server. It is used to serve HTML files and CGI."),
-inet => __("The internet superserver daemon (commonly called inetd) starts a
-variety of other internet services as needed. It is responsible for starting
-many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
-all of the services it is responsible for."),
-ipchains => __("Launch packet filtering for Linux kernel 2.2 series, to set
-up a firewall to protect your machine from network attacks."),
-keytable => __("This package loads the selected keyboard map as set in
-/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
-You should leave this enabled for most machines."),
-kheader => __("Automatic regeneration of kernel header in /boot for
-/usr/include/linux/{autoconf,version}.h"),
-kudzu => __("Automatic detection and configuration of hardware at boot."),
-linuxconf => __("Linuxconf will sometimes arrange to perform various tasks
-at boot-time to maintain the system configuration."),
-lpd => __("lpd is the print daemon required for lpr to work properly. It is
-basically a server that arbitrates print jobs to printer(s)."),
-lvs => __("Linux Virtual Server, used to build a high-performance and highly
-available server."),
-named => __("named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."),
-netfs => __("Mounts and unmounts all Network File System (NFS), SMB (Lan
-Manager/Windows), and NCP (NetWare) mount points."),
-network => __("Activates/Deactivates all network interfaces configured to start
-at boot time."),
-nfs => __("NFS is a popular protocol for file sharing across TCP/IP networks.
-This service provides NFS server functionality, which is configured via the
-/etc/exports file."),
-nfslock => __("NFS is a popular protocol for file sharing across TCP/IP
-networks. This service provides NFS file locking functionality."),
-numlock => __("Automatically switch on numlock key locker under console
-and XFree at boot."),
-oki4daemon => __("Support the OKI 4w and compatible winprinters."),
-pcmcia => __("PCMCIA support is usually to support things like ethernet and
-modems in laptops.  It won't get started unless configured so it is safe to have
-it installed on machines that don't need it."),
-portmap => __("The portmapper manages RPC connections, which are used by
-protocols such as NFS and NIS. The portmap server must be running on machines
-which act as servers for protocols which make use of the RPC mechanism."),
-postfix => __("Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."),
-random => __("Saves and restores system entropy pool for higher quality random
-number generation."),
-rawdevices => __("Assign raw devices to block devices (such as hard drive
-partitions), for the use of applications such as Oracle"),
-routed => __("The routed daemon allows for automatic IP router table updated via
-the RIP protocol. While RIP is widely used on small networks, more complex
-routing protocols are needed for complex networks."),
-rstatd => __("The rstat protocol allows users on a network to retrieve
-performance metrics for any machine on that network."),
-rusersd => __("The rusers protocol allows users on a network to identify who is
-logged in on other responding machines."),
-rwhod => __("The rwho protocol lets remote users get a list of all of the users
-logged into a machine running the rwho daemon (similiar to finger)."),
-sound => __("Launch the sound system on your machine"),
-syslog => __("Syslog is the facility by which many daemons use to log messages
-to various system log files.  It is a good idea to always run syslog."),
-usb => __("Load the drivers for your usb devices."),
-xfs => __("Starts the X Font Server (this is mandatory for XFree to run)."),
-    );
-    my ($name, $prefix) = @_;
-    my $s = $services{$name};
-    if ($s) {
-	$s = translate($s);
-    } else {
-	$s = -e "$prefix/etc/rc.d/init.d/$name" && cat_("$prefix/etc/rc.d/init.d/$name");
-	$s ||= -e "$prefix/etc/init.d/$name" && cat_("$prefix/etc/init.d/$name");
-	$s ||= -e "$prefix/etc/xinetd.d/$name" && cat_("$prefix/etc/xinetd.d/$name");
-	$s =~ s/\\\s*\n#\s*//mg;
-	if ($s =~ /^# description:\s+\S/sm) {
-	    ($s) = $s =~ /^# description:\s+(.*?)^(?:[^#]|# {0,2}\S)/sm;
-	} else {
-	    ($s) = $s =~ /^#\s*(.*?)^[^#]/sm;
-	}
-	$s =~ s/#\s*//mg;
-    }
-    $s =~ s/\n/ /gm; $s =~ s/\s+$//;
-    $s;
-}
-
-sub ask_install_simple {
-    my ($in, $prefix) = @_;
-    my ($l, $on_services) = services($prefix);
-    $in->ask_many_from_list("drakxservices",
-			    _("Choose which services should be automatically started at boot time"),
-			    {
-			     list => $l,
-			     help => sub { description($_[0], $prefix) },
-			     values => $on_services,
-			     sort => 1,
-			    });
-}
-
-sub ask_install {
-    my ($in, $prefix) = @_;
-    my %root_services = (
-			 _("Printing") => [ qw(cups cupslpd lpr lpd oki4daemon hpoj cups-lpd ) ],
-			 _("Internet") => [ qw(httpd boa tux roxen ftp pftp tftp proftpd wu-ftpd pure-ftpdipsec proftpd-xinetd
-                                               ipchains iptables ipvsadm isdn4linux ibod jabber jabber-icq adsl squid
-                                               portsentry prelude nessusd junkbuster radvd cddbp ippl iptoip jail.init ) ],
-			 _("File sharing") => [ qw(nfs nfslock smb nettalk netfs mcserv autofs amd
-                                                   venus.init auth2.init codasrv.init update.init swat ) ],
-			 _("System") => [ qw(usb usbd pcmcia irda xinetd inetd kudzu harddrake apmd sound network xfs
-                                             alsa functions halt kheader killall mandrake_everytime mandrake_firstime
-                                             random rawdevices single keytable syslog crond medusa-init portmap acon
-                                             anacron atd gpm psacct wine acpid numlock jserver sensors mosix bpowerd bpowerfail
-                                             fcron powertweak.init ups syslog-ng cvs apcupsd) ],
-			 _("Remote Administration") => [ qw(sshd telnetd telnet rsh rlogin rexec webmin cfd heartbeat ldirectord
-                                                            iplog mon vncserver netsaint olympusd drakxtools_http ) ],
-#			 _("Network Client") => [ qw(ypbind nscd arpwatch fetchmail dnrd_rc diald rsync ) ],
-#			 _("Network Server") => [ qw(named bootparamd ntpd xntpd chronyd postfix sendmail
-#                                                     imap imaps ipop2 ipop3 pop3s routed yppasswdd ypserv ldap dhcpd dhcrelay
-#                                                     hylafax innd identd rstatd rusersd rwalld rwhod gated
-#                                                     kadmin kprop krb524 krb5kdc krb5server hldsld bayonne sockd dhsd gnu-pop3d
-#                                                     gdips pptpd.conf vrrpd crossfire bnetd pvmd ircd sympa finger ntalk talk) ],
-			 _("Database Server") => [ qw(mysql postgresql) ],
-			);
-    my %services_root;
-    foreach my $root (keys %root_services) {
-	$services_root{$_} = $root foreach @{$root_services{$root}};
-    }
-    my ($l, $on_services) = services($prefix);
-    my %services;
-    $services{$_} = 0 foreach @{$l || []};
-    $services{$_} = 1 foreach @{$on_services || []};
-
-    $in->ask_browse_tree_info('drakxservices', _("Choose which services should be automatically started at boot time"),
-			      {
-			       node_state => sub { $services{$_[0]} ? 'selected' : 'unselected' },
-			       build_tree => sub {
-				   my ($add_node, $flat) = @_;
-				   $add_node->($_, !$flat && ($services_root{$_} || _("Other")))
-				     foreach sort keys %services;
-			       },
-			       grep_unselected => sub { grep { !$services{$_} } @_ },
-			       toggle_nodes => sub {
-				   my ($set_state, @nodes) = @_;
-				   my $new_state = !$services{$nodes[0]};
-				   foreach (@nodes) {
-				       $set_state->($_, $new_state ? 'selected' : 'unselected');
-				       $services{$_} = $new_state;
-				   }
-			       },
-			       get_status => sub {
-				   _("Services: %d activated for %d registered", 
-				     scalar(grep { $_ } values %services),
-				     scalar(values %services));
-			       },
-			       get_info => sub { formatLines(description($_[0], $prefix)) },
-			      }) or return ($l, $on_services); #- no change on cancel.
-    ($l, [ grep { $services{$_} } @$l ]);
-}
-
-sub ask_standalone_gtk {
-    my ($in, $prefix) = @_;
-    my ($l, $on_services) = services($prefix);
-
-    require my_gtk;
-    my_gtk->import(qw(:helpers :wrappers));
-
-    my $W = my_gtk->new(_("Services"));
-    my ($x, $y, $w_popup);
-    my $nopop = sub { $w_popup and $w_popup->destroy };
-    my $display = sub { $nopop->(); $_[0] and gtkmove(gtkshow(gtkadd($w_popup=new Gtk::Window (-popup),
-        				       gtksignal_connect(gtkadd(new Gtk::EventBox(),
-        				           gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched_out'),
-        					   gtkset_justify(new Gtk::Label($_[0]), 0))),
-        					   button_press_event => sub { $nopop->() }
-		      ))), $x, $y) };
-    my $update_service = sub {
-		my $started = -e "/var/lock/subsys/$_[0]";
-                my $action = $started ? "stop" : "start";
-                $_[1]->set($started ? _("running") : _("stopped"));
-                $started, $action;
-    };
-    my $strip = sub {
-                my $infos_old = $_[0];
-                my $infos;
-		while ($infos_old =~ s/(.{40})//) {
-                    $1 =~ /(.*) ([^ ]*)/;
-		    $infos .= "$1\n$2";
-                }
-                $infos .= $infos_old;
-    };
-    my $b = new Gtk::EventBox();
-    $b->set_events(["pointer_motion_mask"]);
-    gtkadd($W->{window}, gtkadd($b, gtkpack_($W->create_box_with_title(_("Services and deamons")),
-	1, gtkset_usize(createScrolledWindow(create_packtable({ col_spacings => 10, row_spacings => 3 },
-	    map {
-                my $service = $_;
-        	my $infos = $strip->(description($_, $prefix));
-                $infos ||= _("No additional information\nabout this service, sorry.");
-		my $l = new Gtk::Label();
-                my ($started, $action) = $update_service->($service, gtkset_justify($l, 0));
-		[ gtkpack__(new Gtk::HBox(0,0), $_),
-		  gtkpack__(new Gtk::HBox(0,0), $l),
-		  gtkpack__(new Gtk::HBox(0,0), gtksignal_connect(new Gtk::Button(_("Info")), clicked => sub { $display->($infos) })),
-                  gtkpack__(new Gtk::HBox(0,0), gtkset_active(gtksignal_connect(
-                          new Gtk::CheckButton(_("On boot")),
-                          clicked => sub { if ($_[0]->active) {
-                                               "@$on_services" =~ /$service/ or push(@$on_services,$service)
-                                           } else {
-                                               @$on_services = grep(!/$service/, @$on_services)
-                                        }}), "@$on_services" =~ /$service/ )),
-		  map { my $a = $_;
-                      gtkpack__(new Gtk::HBox(0,0), gtksignal_connect(new Gtk::Button(_($a)),
-                          clicked => sub { my $c = "service $service " . (lc($a) eq "start" ? "restart" : lc($a)) . " 2>&1"; local $_=`$c`; s/\033\[[^mG]*[mG]//g;
-                                           ($started, $action) = $update_service->($service, $l);
-                                           $display->($_);
-                                         }
-                      )) } (__("Start"), __("Stop"))
-		]
-	    }
-            @$l)), 500, 400),
-            0, gtkpack(gtkset_border_width(new Gtk::HBox(0,0),5), $W->create_okcancel)
-            ))
-	  );
-    $b->signal_connect( motion_notify_event => sub { my ($w, $e) = @_;
-                                                               my ($ox, $oy) = $w->window->get_deskrelative_origin;
-                                                               $x = $e->{'x'}+$ox; $y = $e->{'y'}+$oy; });
-    $b->signal_connect( button_press_event => sub { $nopop->()});
-    $::isEmbedded and Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill (12, $::CCPID);
-    $W->main or return;
-    ($l, $on_services);
-}
-
-sub ask {    
-    my ($in, $prefix) = @_;
-    !$::isInstall && $in->isa('interactive_gtk') ? &ask_standalone_gtk : &ask_install;
-}
-
-sub doit {
-    my ($in, $on_services, $prefix) = @_;
-    my ($l, $was_on_services) = services($prefix);
-
-    foreach (@$l) {
-	my $before = member($_, @$was_on_services);
-	my $after = member($_, @$on_services);
-	if ($before != $after) {
-	    my $script = "/etc/rc.d/init.d/$_";
-	    run_program::rooted($prefix, "chkconfig", $after ? "--add" : "--del", $_);
-	    if ($after && cat_("$prefix$script") =~ /^#\s+chkconfig:\s+-/m) {
-		run_program::rooted($prefix, "chkconfig", "--level", "35", $_, "on");
-	    }
-	    if (!$after && $::isStandalone) {
-		run_program::rooted($prefix, $script, "stop");
-	    }
-	}
-    }
-}
-
-#- returns: 
-#--- the listref of installed services
-#--- the listref of "on" services
-sub services {
-    my ($prefix) = @_;
-    my $cmd = $prefix && !$::testing ? "chroot $prefix" : "";
-    my @l = map { [ /([^\s:]+)/, /\bon\b/ ] } grep { !/:$/ } sort `LANGUAGE=C $cmd /sbin/chkconfig --list`;
-    [ map { $_->[0] } @l ], [ map { $_->[0] } grep { $_->[1] } @l ];
-}
-
-1;
diff --git a/perl-install/share/.cvsignore b/perl-install/share/.cvsignore
deleted file mode 100644
index 4173dc671..000000000
--- a/perl-install/share/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-locales.tar.bz2
-locales-*-drakx.tar.bz2
diff --git a/perl-install/share/Makefile b/perl-install/share/Makefile
deleted file mode 100644
index 00e5afcc3..000000000
--- a/perl-install/share/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-all: locales.tar.bz2
-
-# /usr/lib/libc.a to depend on the current glibc
-locales.tar.bz2: locales-skeleton.tar.bz2 gen_locales.sh /usr/lib/libc.a
-	./gen_locales.sh
diff --git a/perl-install/share/advertising/Makefile b/perl-install/share/advertising/Makefile
deleted file mode 100644
index 30005e186..000000000
--- a/perl-install/share/advertising/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-include ../../Makefile.config
-
-install:
-	rm -rf $(ROOTDEST)/Mandrake/share/advertising
-	install -d $(ROOTDEST)/Mandrake/share/advertising
-	install -m755 *.pl $(ROOTDEST)/Mandrake/share/advertising
-	install -m644 *.png $(ROOTDEST)/Mandrake/share/advertising
-	install -m644 list $(ROOTDEST)/Mandrake/share/advertising
diff --git a/perl-install/share/advertising/list b/perl-install/share/advertising/list
deleted file mode 100644
index fb5689909..000000000
--- a/perl-install/share/advertising/list
+++ /dev/null
@@ -1,14 +0,0 @@
-00-thanks.png
-01-gnu.png
-02-internet.png
-03-graphic.png
-04-develop.png
-05-contcenter.png
-06-user.png
-07-server.png
-08-games.png
-09-MDKcampus.png
-10-MDKexpert.png
-11-consul.png
-12-MDKstore.png
-13-Nvert.png
diff --git a/perl-install/share/aliases b/perl-install/share/aliases
deleted file mode 100644
index d3807605a..000000000
--- a/perl-install/share/aliases
+++ /dev/null
@@ -1,7 +0,0 @@
-raidstop raidstart
-gunzip gzip
-install2 perl-install/install2
-commands perl-install/commands
-runinstall2 install2
-fsck.ext2 e2fsck
-rmmod insmod_
diff --git a/perl-install/share/compssList b/perl-install/share/compssList
deleted file mode 100644
index 36b0f4a44..000000000
--- a/perl-install/share/compssList
+++ /dev/null
@@ -1,1665 +0,0 @@
-	                               normal server developer
-
-AVLTree-devel                                  0     0     0
-AfterStep                                     22     0    53
-AfterStep-APPS                                22     0    35  
-Apache-ASP                                   -99     0   -99
-ApacheJServ                                  -99     0   -99
-Apple-StyleWriter-printer-driver__lpstyl       0     0     0
-Aurora					      81    -1    -1
-BasiliskII                                    35     0    10
-BasiliskII-sheepnet                           33     0     8
-BitchX                                        43     0    15
-C++2LaTeX                                      0     0    30
-Canon-CaPSL-printer-driver__cjet               0     0     0
-ClanLib                                       32     0    32
-ClanLib-devel				       0     0    25
-ClanLib-docs				       0     0    25
-ClanLib-gl				       0     0     0
-ClanLib-magick				       0     0     0
-ClanLib-mikmod				       0     0     0
-ClanLib-png                                    0     0     0
-Device3Dfx                                    -1    -1    -1
-DrakConf                                      84    84    84
-drakprofile                                   50     0    50
-draksync                                      50     0    50
-DrakeLogo                                     20     0     0
-ElectricFence                                 10     0    66
-Epplets                                       57     0    53
-Eterm                                         57     0    53
-Eterm-devel                                    0     0     0
-FaxMail                                       30     0     0
-FileRunner                                    45     0    25
-FreeWnn                                      -20   -20   -20
-FreeWnn-devel                                -70   -60   -40
-GConf                                          0     0     0
-GConf-devel                                    0     0    40
-GXedit                                        40     0    55
-Glide_V2                                      -1    -1    -1
-Glide_V2-devel                                -1    -1    -1
-Glide_V3                                      -1    -1    -1
-Glide_V3-DRI                                  -1    -1    -1
-Glide_V3-DRI-devel                            -1    -1    -1
-Glide_V3-devel                                -1    -1    -1
-Glide_V5                                      -1    -1    -1
-Glide_V5-devel                                -1    -1    -1
-HTML-Embperl                                   0    40    40
-Hermes                                        32     0    42
-Hermes-devel                                   0     0    35
-ImageMagick                                   56     5    60
-ImageMagick-devel                             10     0    60
-ImageMagick-lib                                0     0     0
-MAKEDEV                                       91    91    91
-MandrakeUpdate                                82     0    80
-Mesa                                          30     0    70
-Mesa-common                                   30     0    70
-Mesa-common-devel                              0     0    70
-Mesa-demos                                    10     0    15
-MySQL                                          2    55    15
-MySQL-bench                                    2    50    10
-MySQL-client                                   2    52    11
-MySQL-devel                                    0     0    15
-MySQL-shared                                   2    50    10
-ORBit                                          0     0    55
-ORBit-devel                                   10     0    55
-SDL                                           50     0    25
-SDL-devel                                      0     0    25
-SDL_image                                      0     0    25
-SDL_image-devel                                0     0    25
-SDL_mixer				       0     0    25
-SDL_mixer-devel				       0     0    25
-SDL_net					       0     0    25
-SDL_net-devel				       0     0    25
-SDL_ttf					       0     0    25
-SDL_ttf-devel                                  0     0    25
-SVGATextMode                                   0     0     0
-SmallEiffel                                    0     0    30
-SysVinit                                      15    52    45
-TiMidity++                                    51     0    54
-WMRack                                        40     0    32
-WindowMaker                                   40     0    57
-WindowMaker-devel                              0     0    30
-WsLib-devel                                    0     0     0
-X11R6-contrib                                 55     0    47
-XFree86                                       91     0    81
-XFree86-100dpi-fonts                          56     0    30
-XFree86-3DLabs                               -30   -30   -30
-XFree86-75dpi-fonts                           91     0    81
-XFree86-8514                                 -30   -30   -30
-XFree86-AGX                                  -30   -30   -30
-XFree86-FBDev                                -30   -30   -30
-XFree86-I128                                 -30   -30   -30
-XFree86-ISO8859-2                            -20   -30   -20
-XFree86-ISO8859-2-100dpi-fonts               -20   -30   -20
-XFree86-ISO8859-2-75dpi-fonts                -20   -30   -20
-XFree86-ISO8859-2-Type1-fonts                -20   -30   -20
-XFree86-ISO8859-9                            -20   -30   -20
-XFree86-ISO8859-9-100dpi-fonts               -20   -30   -20
-XFree86-ISO8859-9-75dpi-fonts                -20   -30   -20
-XFree86-Mach32                               -30   -30   -30
-XFree86-Mach64                               -30   -30   -30
-XFree86-Mach8                                -30   -30   -30
-XFree86-Mono                                 -30   -30   -30
-XFree86-P9000                                -30   -30   -30
-XFree86-S3                                   -30   -30   -30
-XFree86-S3V                                  -30   -30   -30
-XFree86-SVGA                                 -30   -30   -30
-XFree86-VGA16                                -30   -30   -30
-XFree86-W32                                  -30   -30   -30
-XFree86-Xnest                                  0     0    55
-XFree86-Xvfb                                   0     0    15
-XFree86-cyrillic-fonts                       -20   -30   -20
-XFree86-devel                                 12     0    55
-XFree86-doc                                  -30   -30   -30
-XFree86-glide-module                          -2    -2    -2
-XFree86-libs                                  10     0     0
-XFree86-server                               -30   -30   -30
-XFree86-server-common                        -30   -30   -30
-XFree86-static-libs                            0     0    20
-XFree86-xfs                                    0     0     0
-XaoS                                          40     0    25
-XaoS-aalib                                     0     0     0
-XaoS-svgalib                                   0     0     0
-Xaw3d                                         20     0    70
-Xaw3d-devel                                   10     0    60
-Zope                                           0    15    30
-Zope-components                     	       0    15    30
-Zope-core				       0    15    30
-Zope-pcgi				       0    15    30
-Zope-services				       0    15    30
-Zope-zpublisher				       0    15    30
-Zope-zserver				       0    15    30
-Zope-ztemplates                                0    15    30
-aalib                                         25     0    15
-aalib-devel                                    0     0    25    
-abisuite                                      59     0    45
-acon                                         -10   -10   -10
-acpid                                          0     0     0
-adjtimex                                      22    35    87
-adns                                          30    30    30 
-adns-devel                                     0     0    30
-aktion                                        66     0    15
-alsa                                           0     0     0
-alsa-lib                                       0     0     0
-alsa-lib-devel                                 0     0    20
-alsa-source				       0     0     0
-alsa-utils				       0     0     0
-alsaplayer                                     0     0     0
-am-utils                                       0    25    19
-ami                                          -20   -20   -20
-ami-gnome                                    -20   -20   -20
-anacron                                       85    70    85
-anonftp                                        0    86    13
-apache                                       -99    80   -99
-apache-common                                -99     0   -99
-apache-devel                                 -99     0   -99
-apache-manual                                -99    40   -99
-apache-mod_perl                              -99    85   -99
-apache-mod_perl-devel                        -99     0   -99
-apache-suexec                                -99    75   -99
-apcupsd                                       -1    -1    -1
-apmd                                          -1    -1    -1
-apmd-devel                                    -1    -1    -1
-app-defaults-be                              -30   -30   -30
-app-defaults-cs                              -30   -30   -30
-app-defaults-ga                              -30   -30   -30
-app-defaults-ru                              -30   -30   -30
-app-defaults-th                              -30   -30   -30
-app-defaults-uk                              -30   -30   -30
-arpwatch                                       0    50     0
-ash                                           10    10    10
-aspell                                        49    15    22
-aspell-ca                                    -30   -30   -30
-aspell-cs                                    -30   -30   -30
-aspell-da                                    -30   -30   -30
-aspell-de                                    -30   -30   -30
-aspell-de_CH                                 -30   -30   -30
-aspell-devel                                   0     0    10
-aspell-en                                    -30   -30   -30
-aspell-en_CA                                 -30   -30   -30
-aspell-en_GB                                 -30   -30   -30
-aspell-eo                                    -30   -30   -30
-aspell-es                                    -30   -30   -30
-aspell-fr                                    -30   -30   -30
-aspell-it                                    -30   -30   -30
-aspell-nl                                    -30   -30   -30
-aspell-no                                    -30   -30   -30
-aspell-pl                                    -30   -30   -30
-aspell-sv                                    -30   -30   -30
-at                                            42    96    94
-aterm                                         17     0    13
-audiofile                                     25     0    26
-audiofile-devel                               10     0    26
-aumix                                         79     0    79
-auth_ldap                                      5    75    20
-autoconf                                      15     0    84
-autofs                                        48    45    50
-autoirpm                                     -60   -60   -60
-autologin                                     82     0    82
-automake                                      15     0    84
-awesfx                                        20     0    13
-basesystem                                     0     0     0
-bash                                           0     0     0
-bash-doc                                      35    50    71
-bash1                                         15     5    13
-bc                                            40    25    25
-bdflush                                        0     0     0
-bind                                           0    75     0
-bind-devel                                     0     0     0
-bind-utils                                    25    35    70
-binutils                                      47     0    87
-bison                                         10     0    80
-blackbox                                      30     0    45
-blt                                           10     0    75
-bluefish                                      60     0    60
-boa                                          -99   -99   -99
-bonnie                                         5    45    25
-bonobo                                        20     0    20
-bonobo-devel                                   0     0    35
-bootparamd                                    20    78     0
-bug-buddy                                      0     0    20
-byacc                                         16     0    80
-bzflag                                        -1    -1    -1
-bzip2                                         41    85    75
-caching-nameserver                             0    70     0
-cbb                                           55     0    13
-cdecl                                         10     0    70
-cdialog                                        3     0    20
-cdp                                           40     0    27
-cdparanoia                                    45     0    45
-cdparanoia-devel                               0     0    30
-cdrecord                                      45     0    45
-cdrecord-cdda2wav                             44     0    45
-cdrecord-devel                                10     0     0
-cervisia                                       0     0     0
-cfengine                                       0    30     0
-chkconfig                                      0    65    10
-chkfontpath                                    0     0    50
-chromium                                      -1    -1    -1
-clanbomber                                    65     0    25 
-cleanfeed                                     24    65    21
-clisp                                          0     0    15
-compat-glibc                                   0     0    40
-compat-libs                                    0     0     0
-comsat                                         0    30     2
-console-tools                                 97    97    97
-console-tools-devel                            0     0     0
-control-center                                69     0    10
-control-center-devel                           0     0     0
-control-panel                                  2     0     2
-cooledit                                       0     0    30
-corewars                                       0    15     0
-cpio                                          90    89    90
-cproto                                        15     0    61
-cracklib                                      10    85    35
-cracklib-devel                                 0     0    15
-cracklib-dicts                                10    82    35
-crontabs                                      95    95    95
-csmash                                        -1    -1    -1
-ctags                                         10     0    80
-cttex                                        -30   -30   -30
-cups                                         -99   -99   -99
-cups-devel                                     0     0    20
-cups-drivers                                 -99   -99   -99
-cvs                                           18    60    72
-cvsweb                                         0     0    30
-cxhextris                                     50     0    36
-detect                                        25    25    75 
-detect-devel                                   0     0    60
-detect-lst                                    25    25    75
-dev                                           99    99    99
-dev86                                          0     0    40
-dev86-devel                                    0     0    40
-devfsd                                         0     0     0
-dhcp                                         -99    80   -99
-dhcp-client                                    0    79     5
-dhcp-relay                                     0    10     0
-dhcpcd                                         0     0     0
-dhcpxd                                         0     0     0
-dia                                           30     0    30
-dialog                                        10     0    71
-diffstat                                      12    50    87
-diffutils                                     42    55    87
-dip                                           40    45    13
-docbook-dtd31-sgml                            30     0    45
-docbook-style-dsssl                            5    15    15
-docbook-style-dsssl-doc                        4    14    14
-dosemu                                        45     0    49
-dosemu-freedos                                45     0    49
-dosfstools                                    40    15    22
-doxygen                                        0     0    40
-dpsftp                                        45     0     0
-dpsftplib                                     45     0     0
-dpsftplib-devel                               45     0    15
-drakfloppy                                    84     0    84
-drakfont                                      84     0    84
-drakxtools                                    86    80    87
-dump                                          10    75    87
-e2fsprogs                                     98    98    98    
-e2fsprogs-devel                                0     0    25
-eMusic                                        65     0    50
-ed                                            45    10     5
-ee                                            58     0    54
-efax                                          25    78    30
-egcs                                           5     0    50
-egcs-c++                                       5     0    50
-egcs-cpp                                       5     0    50
-egcs-g77                                       5     0    50
-egcs-objc                                      5     0    50
-egcs-objc-devel                                4     0    20
-eggdrop                                       25     0    25
-eject                                         92    33    91
-elm                                           22     5    13
-emacs                                         49    45     0
-emacs-X11                                     51     0    69
-emacs-el                                       0     0    15
-emacs-leim                                    20     0    50
-emacs-nox                                     20     0    14
-emacs-pcomplete                               20     0    30
-emacs-tramp                                   20    20    30
-enlightenment                                 41     0    55
-enscript                                      20    25    71
-eog                                           30     0    20
-eperl                                          0     0    10
-eshell                                        20     0    30
-esound                                         0     0     0
-esound-devel                                  12     0     4
-etcskel                                       98    98    98
-ethemes                                       40     0    35
-exmh                                          40     0    36
-expect                                        23     0    71
-ext2ed                                         5    52    42
-ext2resize                                     5    52    42
-faces                                         20    75    15
-faces-devel                                   10     0     0
-faces-xface                                   20     0    15
-faq                                           63    49    53
-fbset                                         22     0     0
-fdutils                                       10     0     0
-fetchmail                                     45    99    31
-fetchmail-daemon                              20    30    20
-fetchmailconf                                 45     0    40
-file                                          92    92    94
-filesystem                                    99    99    99
-fileutils                                     99    99    99
-findutils                                     97    97    97
-finger                                        40    35    27
-finger-server                                  0    30     0
-flex                                          13     0    72
-fltk                                           0     0     0
-fltk-devel                                     0     0    15
-fmirror                                       45    35    40
-fnlib                                         10     0     7
-fnlib-devel                                   10     0     0
-fonts-ttf-armenian                           -10     0   -10
-fonts-ttf-big5                               -10     0   -10
-fonts-ttf-decoratives                         72     0    68
-fonts-ttf-gb2312                             -10     0   -10
-fonts-ttf-japanese                           -10     0   -10
-fonts-ttf-korean                             -10     0   -10
-fonts-ttf-west_european                       77     0    74
-fonts-type1-baltic                           -15   -15   -15
-fortune-mod                                   10     0    10
-freeciv                                       54     0    53
-freetype                                      10     0     4
-freetype-devel                                10     0     0
-fribidi                                        0     0     0
-fribidi-devel                                  0     0     0
-ftp                                           90    92    90
-fvwm                                          12     0    15
-fvwm2                                         17     0    17
-fvwm2-icons                                   17     0    17
-fwhois                                        25    45    36
-g-print                                       20     0    20
-g-wrap                                         0     0    40
-g-wrap-devel                                   0     0    20
-gaddr                                         45     0    40
-gaim                                          35     0    30
-gated                                          0    80     0
-gatos                                         55     0    49
-gawk                                          10    55    87
-gawk-doc                                      10    35    50
-gcc                                           50    40    90
-gcc-c++                                       15     0    74
-gcc-chill                                     20     0    65
-gcc-colorgcc                                   0     0     0
-gcc-cpp                                       47     0    72
-gcc-fr                                         0     0     0
-gcc-g77                                       15     0    27
-gcc-java                                      16     0    65
-gcc-libgcj                                    15     0    30
-gcc-objc                                      16     0    35
-gcombust                                      40     0     0
-gd                                            12     0    71
-gd-devel                                      10     0    71
-gd-utils                                      45     0    64
-gdb                                           12     0    94
-gdbm                                          12     0    72
-gdbm-devel                                    10     0    72
-gdk-pixbuf                                    68     0    70
-gdk-pixbuf-devel                               0     0    40
-gdm                                           67     0    55
-gedit                                         68     0    62
-gedit-devel                                    0     0     0
-genromfs                                      10     0     9
-gentoo                                        30     0     0
-gettext                                       10    15    71
-gettext-devel                                  0     0    35
-getty_ps                                      99    99    99
-gfcc                                          15     0    31
-gftp                                          67     0    62
-ggv                                           25     0     0
-ghc                                            0     0    35
-ghc-prof                                       0     0     2
-ghostscript                                   40    70    75
-ghostscript-utils                             30    50    55
-ghostscript-fonts                             22    55    75
-ghostscript-module-SVGALIB                    10     0    63
-ghostscript-module-X                          40    60    65
-gif2png                                       10     0    20
-giftrans                                      42     0    71
-gimp                                          69     0    67
-gimp-data-extras                              55     0    58
-gimp-devel                                    10     0    40
-gimp-libgimp                                  10     0    50
-gimp-perl                                     30     0    30
-git                                           69    35    54
-gkrellm                                       15    30    15
-gkrellm-devel                                  0     0    20
-glade                                         17     0    57
-glademm                                        0     0    40
-glib                                           1     0     0
-glib-devel                                    10     0    87
-glibc                                          1    99    96
-glibc-devel                                   25     0    76
-glibc-profile                                  1     0    54
-gltron                                        -1    -1    -1
-gmc                                           68     0    59
-gmp                                           17     0    71
-gmp-devel                                     10     0    71
-gnomba                                        24     0    24
-gnome-applets                                 68     0    55
-gnome-audio                                   60     0    55
-gnome-audio-extra                             55     0    50
-gnome-chess                                   60     0    55
-gnome-core                                    68     0    55
-gnome-core-devel                              10     0    55
-gnome-games                                   60     0    59
-gnome-games-devel                             10     0     0
-gnome-guile                                    0     0    50
-gnome-guile-devel                             10     0    50
-gnome-iconedit                                60     0    55
-gnome-libs                                    68     0    55
-gnome-libs-devel                              10     0    55
-gnome-linuxconf                               74     0    74
-gnome-media                                   60     0    58
-gnome-network                                 60     0    58
-gnome-objc                                     0     0    40
-gnome-objc-devel                              10     0    40
-gnome-pilot                                   55     0    45
-gnome-pilot-conduits                          45     0    35
-gnome-pilot-devel                              0    15     0
-gnome-pim                                     61     0    70
-gnome-pim-conduits                            51     0    60
-gnome-pim-devel                               10     0    70
-gnome-print                                   62     0    55
-gnome-print-devel                             10     0    55
-gnome-tiles                                   60     0    55
-gnome-toaster                                 65     0    61
-gnome-users-guide                             66     0    60
-gnome-utils                                   66     0    50
-gnome-vfs                                      0     0     0
-gnome-vfs-devel                                0     0    30
-gnomeicu                                      61     0    58
-gnomemm                                        0     0    40
-gnomemm-devel                                  0     0    30
-gnorpm                                        74     0    71
-gnozip                                        50     0    60
-gnucash                                       35     0    15
-gnucash-devel                                  0     0    12
-gnuchess                                      40     0    31
-gnumeric                                      67     0    58
-gnuplot                                       65     0    53
-gnus                                          20     0    14
-gob                                            0     0    20
-gperf                                         12     0    72
-gphoto                                        60     0    58
-gpm                                            0    65    87
-gpm-devel                                     10     0    55
-gprolog                                        5     5    45
-gps                                           30    15    30
-gqcam                                          0     0     0
-gqview                                        55     0    49
-grep                                           0    92    94
-grip                                          60     0    35
-groff                                          0     0    62
-groff-for-man                                  0     0     0
-groff-gxditview                               22     0    19
-groff-perl                                     0     0     0
-grpmi                                          0     0     0
-grub                                          99    99    99
-grub-doc                                       0     0    25
-gsl                                           10     0     0
-gsl-devel                                      0     0     0
-gsu                                           65     0    53
-gtk+                                           0     0    70
-gtk+-devel                                    10     0    70
-gtk+licq                                      45     0    30
-gtk+mdk                                        0     0    15
-gtk+mdk-devel                                  0     0    15
-gtk-engines                                    0     0    70
-gtk-themes                                    50     0    20
-gtkdialogs                                     0     0     0
-gtkeyboard                                    20     0     0
-gtkglarea                                     10     0    15
-gtkglarea-devel                                0     0    15
-gtkgo                                         15     0     5
-gtkgraph                                      65     0    35
-gtkhtml                                        0     0     0
-gtkhtml-devel                                  0     0     0
-gtkmm                                         20     0    55
-gtkmm-devel                                   20     0    55
-gtktalog        			      52     0    25
-gtkzip                                        60     0    58
-gtop                                          60     0    58
-gtulpas                                       10     0    10
-guile                                         11     0    75
-guile-devel                                   10     0    75
-gurpmi                                        82     0    86
-gv                                            55     0    49
-gzip                                          98    98    98
-hackkernel                                     0     0     0
-hackkernel-doc                                 0     0     0
-hackkernel-headers                             0     0     0
-hackkernel-pcmcia-cs                           0     0     0
-hackkernel-source                              0     0     0
-happy                                          0     0    25
-harddrake                                     83     0    83
-haskell-GTK                                    0     0    10
-haskell-GTK-devel                              0     0    10
-hdparm                                        98    98    98
-heartbeat                                     -1    25    -1
-hexedit                                       91    91    91
-howto-html-de				     -30   -30   -30
-howto-html-el				     -30   -30   -30
-howto-html-en				     -30   -30   -30
-howto-html-es				     -30   -30   -30
-howto-html-fr				     -30   -30   -30
-howto-html-hr				     -30   -30   -30
-howto-html-id				     -30   -30   -30
-howto-html-it                                -30   -30   -30
-howto-html-ja				     -30   -30   -30
-howto-html-ko				     -30   -30   -30
-howto-html-pl				     -30   -30   -30
-howto-html-ro				     -30   -30   -30
-howto-html-sl				     -30   -30   -30
-howto-html-sv				     -30   -30   -30
-howto-html-zh                                -30   -30   -30
-howto-utils                                    0     0     0
-hugs98                                         0     0    15
-hylafax                                        0     0     0
-hylafax-client                                 0     0     0
-hylafax-server                                 0     0     0
-ibtk                                          20     0    13
-ical                                          40     0    27
-icepref                                       50     0    54
-icewm                                         65     0    78
-icewm-light                                   90     0    80
-imap                                           0    80     6
-imap-devel                                     0     0     6
-imlib                                         10     0    71
-imlib-cfgeditor                               70     0    71
-imlib-devel                                   10     0    50
-imwheel                                       78    60    73
-indent                                        20     0    91
-indexhtml                                      0    87    76
-inews                                          6    12    15
-info                                          20    65    70 
-info-install                                   0     0    10
-initscripts                                   99    99    99
-inn                                            0    55     0
-inn-devel                                      0     0     0
-intimed                                        0    55    10
-ipchains                                      15    98    13
-iplog                                         15    15    15               
-iproute2                                       0    30     0
-ipvsadm                                        0    15     0
-ipxutils                                      20    85     9
-irda-utils                                    -1    -1    -1
-irssi                                         59     0    57
-isapnptools                                   43    73    73
-isapnptools-devel                              0     0    70
-isdn4k-utils                                 -99   -99   -99
-isdn4net                                     -99   -99   -99
-isicom                                        20     0    13
-ispell                                        49    15    22
-ispell-af                                    -15   -15   -15
-ispell-br                                    -15   -15   -15
-ispell-ca                                    -15   -15   -15
-ispell-cs                                    -15   -15   -15
-ispell-da                                    -15   -15   -15
-ispell-de                                    -15   -15   -15
-ispell-el                                    -15   -15   -15
-ispell-en                                    -15   -15   -15
-ispell-eo                                    -15   -15   -15
-ispell-es                                    -15   -15   -15
-ispell-fi                                    -15   -15   -15
-ispell-fr                                    -15   -15   -15
-ispell-ga                                    -15   -15   -15
-ispell-gd                                    -15   -15   -15
-ispell-gv                                    -15   -15   -15
-ispell-id                                    -15   -15   -15
-ispell-it                                    -15   -15   -15
-ispell-nl                                    -15   -15   -15
-ispell-no                                    -15   -15   -15
-ispell-pl                                    -15   -15   -15
-ispell-pt                                    -15   -15   -15
-ispell-pt_BR                                 -15   -15   -15
-ispell-ro                                    -15   -15   -15
-ispell-ru                                    -15   -15   -15
-ispell-sk                                    -15   -15   -15
-ispell-sl                                    -15   -15   -15
-ispell-sv                                    -15   -15   -15
-itcl                                          10     0    60
-jadetex                                       15     0    45
-jed                                           16    18    14
-jed-common                                     0    18     0
-jed-xjed                                      40     0    22
-jikes                                          1     0    65
-joe                                           20    20    15
-kaffe                                         10     0    60
-kdbg                                          15     0    27
-kde1-compat                                    0     0     0
-kde1-compat-devel                              0     0     0
-kdeaddutils                                   73     0    62
-kdeaddutils-devel                              1     1    50
-kdeadmin                                      72     0    60
-kdebase                                       79    40    68
-kdebase-devel                                  1     1    60
-kdegames                                      71     0    59
-kdegraphics                                   77    40    66
-kdegraphics-devel                              1     1    60
-kdelibs                                        0     0     0
-kdelibs-devel                                  1     1    60
-kdelibs-sound                                 60     0    55
-kdelibs-sound-devel                            1     1    60
-kdemultimedia                                 77     0    66
-kdemultimedia-devel                            1     1    60
-kdenetwork                                    72     0    60
-kdenetwork-devel                               1     1    60
-kdepim                                        72     0    63
-kdesdk                                         0     0    35
-kdesupport                                     0     0     0
-kdesupport-devel                               0     0    15
-kdetoys                                       70     0    65
-kdeutils                                      78     0    67
-kdiff                                          0     0     0
-kdiskcat                                       0     0     0
-kdoc                                           0     0    35
-kernel                                        99    99    99
-kernel-doc                                     5    50    65
-kernel-headers                                 1    45    94
-kernel-linus                                  -1    -1    -1
-kernel-pcmcia-cs                              -1    -1    -1
-kernel-secure                                  0     0     0
-kernel-smp                                    -1    -1    -1
-kernel-source                                  0    45    65
-kernel-utils                                   0     5    25
-kfilecoder                                     0     0     0
-kfirewall                                      0     0     0
-kfortune                                       0     0     0
-kfsstatus                                      0     0     0
-kfun21                                         0     0     0
-kimon                                          0     0     0
-kinput2-wnn4                                 -15   -15   -15
-kisocd                                         0     0     0
-kless                                          0     0     0
-klilo                                          0     0     0
-klyx                                           0     0     0
-kmag                                           0     0     0
-kmol                                           0     0     0
-kmp3                                           0     0     0
-kmp3te                                         0     0     0
-koffice                                       69     0    55
-koffice-devel                                  0     0    35
-kon2                                         -12   -60   -15
-kover                                         69     0    60
-kpacman                                        0     0     0
-kreglo                                         0     0     0
-krubik                                         0     0     0
-ksendfax                                       0     0     0
-kslide                                         0     0     0
-ktail                                          0     0     0
-ktelnet                                        0     0     0
-kterm                                        -10   -90   -10
-kudzu                                         97     0    97
-kudzu-devel                                    0     0    43
-kups                                          60     0    50
-kups-devel                                     0     0     0
-kvideogen                                      0     0     0
-kvirc                                         69     0    56
-kvoice                                         0     0     0
-kvoicecontrol                                  0     0     0
-kwebget                                        0     0     0
-lame                                          15    40    35
-latex2html                                    25     0    50
-latte                                          0     0    45
-ld.so                                         98    98    98
-leafnode                                       0    50     0
-less                                          97    97    97
-lesstif                                        0     0     0
-lesstif-clients				       0     0     0
-lesstif-devel				       0     0     0
-lesstif-mwm                                    2     0     2
-lftp                                          50    78    83
-lha                                           40    25    72
-libPropList                                   10     0    80
-libPropList-devel                              0     0    34
-libc                                          10    15    75
-libelf                                        10    15    80
-libghttp                                      10     0    55
-libghttp-devel                                10     0    55
-libglade                                      10     0    55
-libglade-devel                                10     0    40
-libgr                                         10     0    71
-libgr-devel                                   10     0    70
-libgr-progs                                   10     0     9
-libgtop                                       10     0    55
-libgtop-devel                                 10     0    55
-libjpeg                                       10     0    71
-libjpeg-devel                                 10     0    70
-libmikmod                                     10     0    55
-libmikmod-devel                               10     0    55
-libnet                                        97    97    97
-libole2                                        0     0     0
-libole2-devel                                  0     0     0
-libpcap                                       10    80    72
-libpcap-devel                                  0     0     0
-libpng                                        10     0    71
-libpng-devel                                  10     0    71
-librep                                        10     0    50
-librep-devel                                  10     0    50
-libsafe                                        0     0    35
-libsigc++                                      0     0    25
-libsigc++-devel                                0     0    25
-libsigc++-examples                             0     0    25
-libstdc++                                     10     0    80
-libstdc++-compat                              10     0    60
-libstdc++-devel                               10     0    80
-libtabe                                      -15   -90   -15
-libtabe-devel                                -15   -90   -15
-libtermcap                                    10    55    87
-libtermcap-devel                              10     0    64
-libtiff                                       10     0    72
-libtiff-devel                                 10     0    72
-libtool                                       10     0    85
-libtool-devel                                  0     0     0
-libungif                                      10     0    72
-libungif-devel                                10     0    72
-libungif-progs                                10     0     2
-libunicode                                    10     0    80
-libunicode-devel                               0     0    50
-libwmf                                         0     0    15
-libxml                                        10     0    71
-libxml-devel                                  10     0    71
-libxml2                                       10     0    71
-libxml2-devel                                 10     0    71
-licq                                          62     0    45
-licq-autoreply                                45     0    30
-licq-console                                  45     0    30
-licq-devel				       0     0    20
-licq-forwarder                                45     0    30
-licq-rms				      45     0    30
-licq-update-hosts                             45     0    30
-lilo                                          99    99    99
-lilo-doc                                       0     0    30
-links                                         20    25    20
-linux_logo                                    92    72    92
-linuxconf                                     90    79    86
-linuxconf-gui                                 -1    -1    -1
-linuxconf-lib                                  0     0     0
-linuxconf-util                                 0     0     0
-linuxconf                                     90    79    86
-linuxconf-devel                               10     0    70
-lkmpg                                          2     0    65
-locales                                       96    76    96
-locales-af                                    -1    -1    -1
-locales-ar                                    -1    -1    -1
-locales-az                                    -1    -1    -1
-locales-be				      -1    -1    -1
-locales-bg                                    -1    -1    -1
-locales-br                                    -1    -1    -1
-locales-ca                                    -1    -1    -1
-locales-cs                                    -1    -1    -1
-locales-cy                                    -1    -1    -1
-locales-da                                    -1    -1    -1
-locales-de                                    -1    -1    -1
-locales-el                                    -1    -1    -1
-locales-en                                    -1    -1    -1
-locales-eo                                    -1    -1    -1
-locales-es                                    -1    -1    -1
-locales-et                                    -1    -1    -1
-locales-eu                                    -1    -1    -1
-locales-fa                                    -1    -1    -1
-locales-fi                                    -1    -1    -1
-locales-fo                                    -1    -1    -1
-locales-ur                                    -1    -1    -1
-locales-fr                                    -1    -1    -1
-locales-ga                                    -1    -1    -1
-locales-gd                                    -1    -1    -1
-locales-gl                                    -1    -1    -1
-locales-gv                                    -1    -1    -1
-locales-he                                    -1    -1    -1
-locales-hi				      -1    -1    -1
-locales-hr                                    -1    -1    -1
-locales-hu                                    -1    -1    -1
-locales-hy                                    -1    -1    -1
-locales-id                                    -1    -1    -1
-locales-is                                    -1    -1    -1
-locales-it                                    -1    -1    -1
-locales-ja                                    -1    -1    -1
-locales-ka                                    -1    -1    -1
-locales-kl                                    -1    -1    -1
-locales-ko                                    -1    -1    -1
-locales-kw                                    -1    -1    -1
-locales-lo                                    -1    -1    -1
-locales-lt                                    -1    -1    -1
-locales-lv                                    -1    -1    -1
-locales-mi				      -1    -1    -1
-locales-mk                                    -1    -1    -1
-locales-ms                                    -1    -1    -1
-locales-nl                                    -1    -1    -1
-locales-no                                    -1    -1    -1
-locales-oc                                    -1    -1    -1
-locales-pd                                    -1    -1    -1
-locales-ph				      -1    -1    -1
-locales-pl                                    -1    -1    -1
-locales-pp                                    -1    -1    -1
-locales-pt                                    -1    -1    -1
-locales-ro                                    -1    -1    -1
-locales-ru                                    -1    -1    -1
-locales-sk                                    -1    -1    -1
-locales-sl                                    -1    -1    -1
-locales-sq				      -1    -1    -1
-locales-sr                                    -1    -1    -1
-locales-sv                                    -1    -1    -1
-locales-ta				      -1    -1    -1
-locales-tg				      -1    -1    -1
-locales-th                                    -1    -1    -1
-locales-tr                                    -1    -1    -1
-locales-tt                                    -1    -1    -1
-locales-uk                                    -1    -1    -1
-locales-vi                                    -1    -1    -1
-locales-wa                                    -1    -1    -1
-locales-yi                                    -1    -1    -1
-locales-zh                                    -1    -1    -1
-logrotate                                      0    25    15
-losetup                                        5    45    35
-lout                                          15    35    10
-lout-doc                                      31    32    10
-lpg                                           40     0    80
-lpr                                          -99   -99   -99
-lrzsz                                          0    34     0
-lslk                                          20    49    54
-lsof                                          10     0    67
-ltrace                                        10     0     0
-lynx                                          42    78    84
-lyx                                           50     0    58
-m4                                            15     0    80
-macutils                                      22     5    19
-mailcap                                        5     5     4
-mailx                                         92    92    92
-make                                          50    50    94
-man                                           90    65    72
-man-pages                                     90    65    72
-man-pages-cs                                 -10   -30   -25
-man-pages-de                                 -10   -30   -25
-man-pages-es                                 -10   -30   -25
-man-pages-fr                                 -10   -30   -25
-man-pages-hu                                 -10   -30   -25
-man-pages-id                                 -10   -30   -25
-man-pages-it                                 -10   -30   -25
-man-pages-ja                                 -10   -30   -25
-man-pages-ko                                 -10   -30   -25
-man-pages-pl                                 -10   -30   -25
-man-pages-ru                                 -10   -30   -25
-man-pages-zh                                 -10   -30   -25
-mandrake-release                              99    99    99
-mandrake_desk                                 88     0    88
-mandrake_doc-de                              -15   -90	 -25
-mandrake_doc-en                              -15   -90	 -25
-mandrake_doc-es                              -15   -90	 -25
-mandrake_doc-fr                              -15   -90	 -25
-mandrake_doc-it                              -15   -90	 -25
-mandrake_doc-ru                              -15   -90	 -25
-mars-nwe                                       0    35     0
-mathplot                                      30     0    20
-mawk                                           0    25    80
-mc                                            49    45    31
-mcserv                                         0    40     9
-mek                                           40     0     0
-memprof                                        2     5    65
-menu                                          90     0    80
-menudrake       			      79    75    75
-userdrake       			      50     0    40
-mercury                                        0     0    45
-metamail                                      40    80    50
-mgetty                                        24    20     9
-mgetty-contrib                                28    20    15
-mgetty-sendfax                                28    20    15
-mgetty-viewfax                                28    20    15
-mgetty-voice                                  28    20    15
-mikmod                                        42     0    10
-mingetty                                       5    25    15
-minicom                                       27     0     4
-mirrordir                                     26    99     0
-mkbootdisk                                    35    55    60
-mkinitrd                                      99    99    99
-mkisofs                                       26     0    13
-mktemp                                        15    75    65
-mkxauth                                        2    99     1
-mm                                             0     0    15
-mm-devel                                       0     0     0
-mod_php                                      -99    35   -99
-php-gd                                       -99    15   -99
-php-imap                                     -99    15   -99
-php-ldap                                     -99    15   -99
-php-mysql                                    -99    15   -99
-php-pgsql                                    -99    15   -99
-php-oracle                                   -99    15   -99
-php-dba_gdbm_db2                             -99    15   -99
-php-readline                                 -99    15   -99
-mod_ssl                                      -99    75   -99
-mod_ssl-sxnet                                -99    30   -99
-modutils                                      99    99    99
-mon                                            0    40     0
-mount                                         97    97    97
-mouseconfig                                    0     0     0
-mozilla-fonts                                  0     0     0
-mp3info                                       50    20    50
-mpage                                         55    65    80
-mpeg_lib        			       0     0     0
-mpeg_lib-devel                                 0     0    30
-mpeg_lib-devel                        	       0     0     0
-mpg123                                        42     0    42
-msec                                          98    98    98
-mt-st                                         40     0    49
-mtools                                        90     0    84
-mutt                                          10     0    10
-mxp                                            0     0     0
-nag                                           35    75    25
-nasm                                          20    20    65
-nasm-doc                                       0    20    65
-nasm-rdoff                                     0    20    65
-nc                                             0     0     0
-ncftp                                         55     0    49
-sftp                                          15    10    15
-ncompress                                     42    79    91
-ncpfs                                          0     0     0
-ncurses                                        0     0    80
-ncurses-extraterms                             0     0     0
-ncurses-devel                                 10     0    75
-nedit                                         45    20    65
-net-tools                                     95    96    95
-netkit-base                                   82    99    82
-netscape-castellano                          -13   -30   -18
-netscape-catalan                             -13   -30   -18
-netscape-common                                0     0     0
-netscape-communicator                         78    60    73
-netscape-euskara                             -13   -30   -18
-netscape-francais                            -13   -30   -18
-netscape-german                              -13   -30   -18
-netscape-japanese                            -13   -30   -18
-netscape-navigator                             0     0     0
-netscape-polish                              -13   -30   -18
-netscape-russian                             -13   -30   -18
-netscape-spanish                             -13   -30   -18
-netscape-walon                               -13   -30   -18
-newt                                          10     0    75
-newt-devel                                    10     0    75
-nfs-utils                                    -99    80    13
-nfs-utils-clients                             23    75    23
-nist                                          55     0    45
-nmap                                           5    40    40
-nmap-frontend                                  5    40    40
-nmh                                            0     0     0
-nscd                                           0    40     0
-nss_ldap                                       0    55    25
-ntp                                           -1    -1    -1
-ntsysv                                         0    65    25
-numlock                                      -11   -11   -11
-oaf                                            0     0     0
-oaf-devel                                      0     0     0
-ocaml                                          0     0    35
-octave                                         0     0    30
-oggvorbis                                     30    10    20
-oggvorbis-devel                                0     0    15
-oggvorbis-examples                             0     0    15
-open                                          20    45    80
-openjade                                       5    15    15
-openldap                                       0    50    35
-openldap-devel                                 0     0    25
-openssl                                        0     0     0
-openssl-devel                                  0     0     0
-oregano                                        0     0     0
-p2c                                           10     0    71
-p2c-devel                                     10     0    55
-pam                                            7    99    91
-pam-devel                                      0     0     0
-pam-doc                                        0    50    50
-pan                                           22     0     0
-pango                                         10     0    10
-pango-devel                                    0     0    10
-parted                                        35    35    35
-parted-devel                                   0     0    35
-passwd                                        99    99    99
-patch                                         14     0    72
-pciutils                                      16    55    55
-pciutils-devel                                 0     0    20
-pdksh                                         10    25     9
-penguin-command                               35     0    10
-perl                                          20    19    90
-perl-Apache-Filter                             0     0     0
-perl-Apache-SSI                                0     0     0
-perl-Apache-Session                            0     0     0
-perl-Compress-Zlib                             0     0     0
-perl-Convert-BER                               0     0     0
-perl-DBI                                      10     0    65
-perl-DBIx-Recordset                            0     0     0
-perl-DB_File                                  10     0    50
-perl-Data-ShowTable                           10     0    50
-perl-Date-Calc                                 0     0     0
-perl-DateManip                                 0     0     0
-perl-Devel-Symdump                             0     0     0
-perl-Digest-MD5                               10     0    70
-perl-ExtUtils_F77                              0     0     0
-perl-File-Tail                                 0     0     0
-perl-GTK                                      10     0    72
-perl-GTK-GLArea                               10     0    70
-perl-GTK-GdkImlib                             10     0    70
-perl-GTK-Glade                                10     0    70
-perl-GTK-Gnome                                10     0    70
-perl-GTK-GtkHTML                               0     0     0
-perl-HTML-Clean                                0     0     0
-perl-HTML-Parser                              10     0    55
-perl-HTML-SimpleParse                         10     0    50
-perl-IO-stringy                                5     0    65
-perl-MIME-Base64                               5     0    45
-perl-MIME-tools                                5     0    50
-perl-MLDBM                                     0     0     0
-perl-MP3-Info                                  5     0    40
-perl-Magick                                    0     0     0
-perl-MailTools                                 5     0    50
-perl-Mon                                       0     0     0
-perl-Msgcat                                    5     0    50
-perl-Mysql                                     5     0    40
-perl-Net-Telnet                                0     0     0
-perl-Net_SSLeay                                0     0     0
-perl-PDL                                      10     0    75
-perl-PDL-doc                                   0     0     0
-perl-Parse-RecDescent                         10     0    75
-perl-Parse-Yapp                                0     0     0
-perl-Period                                    0     0     0
-perl-RPM                                       0     0     0
-perl-Storable                                  0     0     0
-perl-Term-Readline-Gnu                        10    10    88
-perl-Tie-Cache                                 0     0     0
-perl-Time-HiRes                                0     0     0
-perl-TimeDate                                  0     0     0
-perl-Tk                                        0    15     0
-perl-Tk-devel                                  0     0     0
-perl-Tk-doc                                    0     0     0
-perl-URI                                       5     0    50
-perl-XML-Parser                                0     0     0
-perl-XML-XSLT                                  0     0     0
-perl-base                                      0     0     0
-perl-devel                                     0     0    30
-perl-libnet                                   10    10    80
-perl-libwww-perl                              10    10    80
-perl-libxml-enno                               0     0     0
-perl-libxml-perl                               0     0     0
-perl-Array-RefElem                             0     0     0
-perl-Data-DumpXML                              0     0     0
-perl-ExtUtils-PerlPP                           0     0     0
-perl-File-NCopy                                0     0     0
-perl-Image-Size                                0     0     0
-perl-Mail-Sendmail                             0     0     0
-perl-Net-XWhois                                0     0     0
-perl-XML-RSS                                   0     0     0
-perlftlib                                     10     0     0
-php                                            0    35     5
-php-devel                                      0     0     5
-php-manual                                     0     0     5
-pidentd                                       15    69    87
-pilot-link                                    40     0    27
-perl-PDA-Pilot                                 0     0     0
-pilot-link-devel                              11     0    25
-pine                                          40     0    27
-pinfo                                         20    20    20
-pingus                                        40     0    10
-piranha                                        0    10     0
-piranha-docs                                   0    10     0
-piranha-gui                                    0    10     0
-playmidi                                      43     0    19
-playmidi-X11                                  53     0    20
-plugger                                       40     0    40
-pmake                                         22     0    75
-pmake-customs                                 12     0    72
-popt                                          10     0    80
-popt-devel                                     0     0    45
-portmap                                        0    91    19
-postfix                                       20    88    51
-postgresql                                     0    56    23
-postgresql-devel                               0     0    23
-postgresql-jdbc                                0     0    15
-postgresql-odbc                                0     0    23
-postgresql-perl                                0     0    23
-postgresql-python                              0     0     5
-postgresql-server                              0    56    23
-postgresql-tcl                                 0     0    23
-postgresql-test                                0     0    23
-postgresql-tk                                  0     0     5
-ppp                                            0     0     0
-pppoe-linuxconf                                0     0     0
-pptp-adsl-fr                                 -99   -99   -99
-pptp-client                                  -99   -99   -99
-procinfo                                      24    15    96
-procmail                                       2    65    45
-procps                                        98    98    98
-procps-X11                                    50     0    32
-procps-devel                                   0     0     0
-proftpd                                      -99   -99   -99
-psacct                                        20    70    87
-psmisc                                        25    62    56
-pspell                                         0     0     0
-pspell-devel                                   0     0     0
-psutils                                        5    42    15
-pth                                            0     0    25
-pth-devel                                      0     0    15
-publib-devel                                   0     0     0
-pump                                           0     0     0
-pump-devel                                     0     0     0
-pwdb                                          13    90    75
-pwdb-devel                                     0     0    50
-pygnome                                       12     0    50
-pygnome-applet                                10     0    30
-pygnome-capplet                               10     0    30
-pygnome-libglade                              10     0    30
-pygtk                                         13     0    50
-pygtk-glarea                                  15     0    25
-pygtk-libglade                                16     0    50
-pysol                                         27     0    27
-python                                        15     0    74
-python-devel                                   0     0    65
-python-docs                                   31     0    40
-python-imaging                                31     0    40
-pythonlib                                     17     0    75
-qcad                                           5     0     5
-qiv                                           78     0    70
-qt                                             0     0    55
-qt-devel                                      10     0    55
-qt-qgl                                        10     0    50
-qt-qimgio                                     10     0    50
-qt2                                            0     0    45
-qt2-devel                                      0     0    45
-qt2-doc                                        0     0    30
-qtcups                                         0     0     0
-qtcups-devel                                   0     0     0
-queso                                          0    25    35
-quota                                         42    85    37
-raidtools                                     25    85     4
-rcs                                           12     0    71
-rdate                                         10    80     9
-rdist                                         10    75     9
-readline                                      11     0    70
-readline-devel                                11     0    65
-recode                                        10     0    72
-recode-devel                                   0     0    50
-reiserfs-utils                                60    60    60
-rep-gtk                                        0     0    20
-rep-gtk-gnome                                  0     0    20
-rep-gtk-libglade                               0     0    20
-rgrep                                         55    55    75
-rhs-printfilters                               1     1     0
-rmt                                           24     0    24
-rocksndiamonds                                35     0    10
-rootfiles                                     99    99    99
-routed                                         0    90    19
-rp-pppoe                                     -99   -99   -99
-rpm                                           99    99    99
-rpm-build                                     45    45    70
-rpm-devel                                     10     0    80
-rpm-python                                     0     0    50
-rpmdrake                                      84     0    81
-rpmlint                                       10    10    60
-rpmtools                                       0     0    25
-rpmtools-compat                                0     0     0
-rpmtools-devel                                 0     0    25
-rsh                                           46    99    75
-rsh-server                                   -99    55    25
-rsync                                         20    99    75
-ruby                                           0     0    25
-ruby-doc				       0     0    25
-ruby-extensions				       0     0    25
-ruby-gtk                                       0     0    25
-rusers                                        20     0    20
-rute                                         -50   -75   -60
-rwall                                         -1     0    -1
-rwho                                          -1     0    -1
-rxvt                                          49     0    80
-rxvt-CLE                                     -10   -90   -10
-sag                                           39    35    25
-samba                                         21    99    23
-samba-client                                  55    56    50
-samba-common                                   0     0     0
-sane                                          45     0    53
-sane-devel                                    10     0     2
-sash                                           5     5     5
-sawfish                                       59     0    57
-sawfish-themer                                15     0    15
-sawfish-themes                                50     0    50
-screen                                        26    43    79
-sed                                           97    97    97
-sendmail                                     -99   -99   -99
-sendmail-cf                                    0     0     0
-sendmail-doc                                   0     0     0
-setserial                                     42     0    55
-setup                                         15    25    15
-sfm                                           25     0    25
-sgml-common                                    5    15    15
-sgml-tools                                     5    15    15
-sh-utils                                      97    97    97
-shadow-utils                                  98    98    98
-shapecfg                                      20    75     8
-sharutils                                     43    99    38
-sketch                                        45     0     0
-slang                                         12     0    75
-slang-devel                                   10     0    70
-slang-doc                                      0     0    70
-slocate                                       99    99    99
-slrn                                          10     0    10
-slrn-pull                                     35     0    45
-smpeg                                         50     0    25
-smpeg-devel                                    0     0    25
-sndconfig                                     70    40    70
-sox                                           41    32    80
-sox-devel                                     13     0    70
-space_sounds                                  52     0    55
-spacecup                                      -1    -1    -1
-spec-helper                                    0     0    35
-spellutils                                     0     0     0
-spruce                                         0     0     0
-squid                                          0    45    16
-stat                                           5    55    45
-statserial                                    15     0    13
-strace                                        11     0    87
-sudo                                           0    30     0
-svgalib                                       10     0    63
-svgalib-devel                                 10     0    63
-swatch                                        22    65     4
-swi-prolog                                     5     5    45
-swig                                           0     0    20
-swig-devel                                     0     0    10
-symlinks                                      23    75    29
-sympa                                         -1    40    -1
-sysklogd                                      97    97    97
-t1lib                                          1     0    29
-t1lib-devel                                   10     0    40
-taipeifonts                                  -10     0   -10
-talk                                          44     0    39
-talk-server                                    0     0     0
-taper                                         42     0    27
-tar                                           97    97    97
-tcl                                           12     0    70
-tcllib                                         0     0     0
-tclx                                          12     0    70
-tcp_wrappers                                   0    99     0
-tcp_wrappers-devel                             0     0     0
-tcpdump                                       10    79     2
-tcsh                                           1    25    15
-telnet                                        90    79    92
-openssh                                       65    75    65
-openssh-server                               -99    35   -99
-openssh-clients                               65    75    65
-openssh-askpass                                0     0     0
-openssh-askpass-gnome                          0     0     0
-gnupg                                         90    90    90
-telnet-server                                -99    28   -99
-termcap                                       98    98    98
-tetex                                         25     0    50
-tetex-afm                                     25     0    40
-tetex-doc                                     25     0    40
-tetex-dvilj                                   40     0    40
-tetex-dvips                                   25     0    40
-tetex-latex                                   25     0    40
-tetex-latex-heb                              -65   -90   -90
-tetex-xdvi                                    25     0    50
-texinfo                                       22     0    50
-textutils                                     99    99    99
-teyjus                                         0     0    35
-tftp                                           0    40     2
-tftp-server                                    0    40     2
-thud                                           0     0     0
-time                                          40    65    87
-timeconfig                                    55    80    60
-timed                                         40    70    36
-timetool                                      54     0    57
-timidity-instruments                          51     0    54
-tin                                           44     0    39
-tix                                           15     0    60
-tk                                            15     0    60
-tkbabel                                       15     0    15
-tkcvs                                         15     0    15
-tkinter                                       15     0    60
-tksysv                                        55     0    60
-tmake                                         10     0    25
-tmpwatch                                      35    75    60
-traceroute                                    40    79    29
-transfig                                      16     0    14
-tree                                          40    25    10
-trn                                           46     0    41
-trophy                                        35     0    10
-tunelp                                        24    15    28
-tuxracer                                      -1    -1    -1
-ucd-snmp                                       0    70    45
-ucd-snmp-devel                                 0    25    45
-ucd-snmp-utils                                 0    37    45
-umb-scheme                                    10     0    65
-unarj                                         40    45    16
-units                                         22     0    10
-unixODBC                                       0     0     0
-unzip                                         70    75    91
-urlview                                       43     0    47
-urpmi                                         95    95    95
-urw-fonts                                     50     0    34
-usbview                                        5     0    10
-usermode                                      51     0    58
-usernet                                       42    55    37
-utempter                                      90     0    73
-utempter-devel                                 0     0     0
-util-linux                                    98    98    98
-uucp                                           0    80     2
-uxcook                                         0     0     0
-vigmeup                                       23     0    11
-vim-X11                                       52     0    26
-vim-common                                     0    19     0
-vim-enhanced                                  46    78    83
-vim-minimal                                   98    98    98
-vimguide                                      30     0    25 
-vixie-cron                                    97    97    97
-vlock                                         40    99    80
-vnc                                           44     0    39
-vnc-SVGALIB                                   43     0    38
-vnc-doc                                       38    35    33
-vnc-java                                      38     0    34
-vnc-server                                     0    40    28
-webmin                                        20    40    20
-wget                                          65    75    53
-which                                          1    25    25
-wine                                          54     0    57
-wine-devel                                     0     0     0
-wmakerconf                                    47     0    57
-wmnet                                         24     0    21
-words                                         47    85    42
-wu-ftpd                                      -99    85   -99
-wv                                            55     0    54
-wv-devel                                       0     0     0
-x3270                                          1     0     0
-xa+cv                                        -10   -20   -10
-xalf                                          68     0    55
-xanim                                         58     0    54
-xbanner                                       15     0    12
-xboard                                        54     0    48
-xboing                                        53     0    47
-xcdroast                                      59     0    53
-xchat                                         58     0    52
-xcin                                         -10   -10   -10
-xcpustate                                     53     0    47
-xdaliclock                                    57     0    51
-xdelta                                        16     0     5
-xdelta-devel                                  10     0     2
-xdosemu                                       34     0    37
-xearth                                        53     0    56
-xemacs                                        57     0     0
-xemacs-el                                      0     0    15
-xemacs-extras                                 50     0    36
-xemacs-info                                   54     0    42
-xemacs-mule                                    0     0     0
-xfce                                           0     0     0
-xfig                                          39     0    33
-xfishtank                                     51     0    45
-xgammon                                       40     0    31
-xinetd                                         0     0     0
-xinetd-devel                                   0     0     0
-xinitrc                                        0     0     0
-xinput                                        10     0    30
-xjewel                                        58     0    52
-xkobo                                         57     0    51
-xli                                           65     0    60
-xlispstat                                      2     0    45
-xloadimage                                    45     0    30
-xlockmore                                     58     0    52
-xmailbox                                      53     0    47
-xmame                                         25     0    25
-xmess                                         25     0    15
-xmms                                          64     0    57
-xmms-devel                                     0     0    15
-xmms-esd                                      46     0    41
-xmms-gnome                                    62     0    52
-xmms-kjofol-skins                             50     0    50
-xmms-mesa                                     -1    -1    -1
-xmms-mikmod                                   43     0    38
-xmms-more-vis-plugins                         55     0    55
-xmms-oggvorbis                                64     0    57
-xmms-skins                                    60     0    55
-xmms-smpeg                                    50     0    45
-xmorph                                        52     0    44
-xmovie                                        55     0    35
-xntp3                                          0    75    31
-xoscope                                       10     0    10
-xosview                                       51     0    45
-xpaint                                        53     0    47
-xpat2                                         43     0    38
-xpcd                                          40     0    30
-xpcd-gimp                                     30     0    25
-xpcd-svga                                      0     0     0
-xpdf                                          57     0    51
-xpilot                                        59     0    53
-xpm                                           52     0    64
-xpm-devel                                     10     0    56
-xpp                                           60     0    50
-xpuzzles                                      50     0    43
-xrally                                         5     0     5
-xrn                                           55     0    49
-xscreensaver                                  68     0    55
-xscreensaver-gl                               -1    -1    -1
-xsoldier                                      51     0    45
-xsysinfo                                      55     0    56
-xterm                                         87     0    80
-xtoolwait                                     50     0    35
-xtraceroute                                   50     0    40
-xtrojka                                       51     0    45
-xwc                                           65     0    40
-xwpe                                           0     0    20
-xwpe-X11                                       0     0    20
-xwpick                                        55     0    49
-xxgdb                                         53     0    47
-yodl                                           0     0     0
-yp-tools                                       0    40     0
-ypbind                                         0    40     0
-ypserv                                         0     0     0
-ytalk                                         21    75    18
-yudit                                         50     0    38
-zgv                                           15     0    13
-zip                                           70    65    87
-zlib                                          16    60    94
-zlib-devel                                    10     0    72
-zsh                                           20    50    72
-zsh-doc                                        0    35    60
-jpilot                                        40     0    30
-jpilot-Mail                                   12     0    10
-jpilot-syncmal                                12     0    10
-jpilot-plugin-devel                            0     0     0
-Maelstrom                                     50     0    35
-auctex                                         5     0     5
-bcast                                         15     0    10
-mpeg2_movie                                   10     0     8
-bg5ps                                        -10   -10   -10
-eroaster                                      55     0    45
-everybuddy                                    52     0    52
-jabber                                         0    30     0
-libjabber                                      0     0     0
-libjabber-devel                                0     0     0
-gabber                                        35    10    20
-gdk-pixbuf-gnomecanvas                         0     0     0
-gdk-pixbuf-loaders                             0     0     0
-gdk-pixbuf-xlib                                0     0     0
-htdig                                         20     0    15
-libxode                                        0     0     0
-libxode-devel                                  0     0     0
-libgnet                                        0     0     0
-libgnet-devel                                  0     0     0
-libetherx                                      0     0     0
-libetherx-devel                                0     0     0
-screem                                        55     0    60
-portsentry                                     0    15     0
-ttfprint                                     -10   -10   -10
-kde-i18n-Afrikaans                           -12   -51	 -23
-kde-i18n-Basque				     -12   -51	 -23
-kde-i18n-Brazil				     -12   -51	 -23
-kde-i18n-Breton				     -12   -51	 -23
-kde-i18n-British			     -12   -51	 -23
-kde-i18n-Bulgarian			     -12   -51	 -23
-kde-i18n-Catalan			     -12   -51	 -23
-kde-i18n-Chinese			     -12   -51	 -23
-kde-i18n-Chinese-Big5			     -12   -51	 -23
-kde-i18n-Croatian			     -12   -51	 -23
-kde-i18n-Czech				     -12   -51	 -23
-kde-i18n-Danish				     -12   -51	 -23
-kde-i18n-Dutch				     -12   -51	 -23
-kde-i18n-Esperanto			     -12   -51	 -23
-kde-i18n-Estonian			     -12   -51	 -23
-kde-i18n-Finnish			     -12   -51	 -23
-kde-i18n-French				     -12   -51	 -23
-kde-i18n-Galacian			     -12   -51	 -23
-kde-i18n-German				     -12   -51	 -23
-kde-i18n-Greek				     -12   -51	 -23
-kde-i18n-Hebrew				     -12   -51	 -23
-kde-i18n-Hungarian			     -12   -51	 -23
-kde-i18n-Icelandic			     -12   -51	 -23
-kde-i18n-Italian			     -12   -51	 -23
-kde-i18n-Japanese			     -12   -51	 -23
-kde-i18n-Korean				     -12   -51	 -23
-kde-i18n-Lithuanian			     -12   -51	 -23
-kde-i18n-Macedonian			     -12   -51	 -23
-kde-i18n-Maori				     -12   -51	 -23
-kde-i18n-Norwegian			     -12   -51	 -23
-kde-i18n-Norwegian			     -12   -51	 -23
-kde-i18n-Polish				     -12   -51	 -23
-kde-i18n-Portuguese			     -12   -51	 -23
-kde-i18n-Romanian			     -12   -51	 -23
-kde-i18n-Russian			     -12   -51	 -23
-kde-i18n-Serbian			     -12   -51	 -23
-kde-i18n-Slovak				     -12   -51	 -23
-kde-i18n-Slovenian			     -12   -51	 -23
-kde-i18n-Spanish			     -12   -51	 -23
-kde-i18n-Swedish			     -12   -51	 -23
-kde-i18n-Tamil				     -12   -51	 -23
-kde-i18n-Thai				     -12   -51	 -23
-kde-i18n-Turkish			     -12   -51	 -23
-kde-i18n-Ukrainian			     -12   -51	 -23
-kde-i18n-Walloon			     -12   -51	 -23
-kde-i18n-Welsh                               -12   -51	 -23
-kde-i18n-Norwegian-Nynorsk                   -12   -51	 -23
-linuxconf-lang-cn                            -35   -60   -35
-linuxconf-lang-cs		             -35   -60   -35
-linuxconf-lang-de		             -35   -60   -35
-linuxconf-lang-es			     -35   -60   -35
-linuxconf-lang-fi			     -35   -60   -35
-linuxconf-lang-fr			     -35   -60   -35
-linuxconf-lang-it			     -35   -60   -35
-linuxconf-lang-ko			     -35   -60   -35
-linuxconf-lang-no			     -35   -60   -35
-linuxconf-lang-pt			     -35   -60   -35
-linuxconf-lang-ro			     -35   -60   -35
-linuxconf-lang-ru-SU			     -35   -60   -35
-linuxconf-lang-se			     -35   -60   -35
-linuxconf-lang-sk			     -35   -60   -35
-linuxconf-lang-zh                            -35   -60   -35
-7colors                                       15     0     0
-ltris                                         28     0     0
-lbreakout                                     35     0     0
-fonts-hebrew-elmar                           -30   -30   -30
-kwintv                                         0     0     0
-xawtv                                          0     0     0
-xawtv-misc                                     0     0     0
-xawtv-radio                                    0     0     0
-wxxt                                           0     0     0
-wxxt-devel                                     0     0     0
-surfraw                                        0     0     0
-R-base                                         0     0     0
-gpa                                           20     0     0
-gnome-telnet                                   0     0     0
-quanta                                        32     0    24
-nslint                                         0    12     0
-logcheck                                       0    12     0
-kisdn-free                                    33     0    30
-
-# commercial                           
-ac3d                                          20     0    20
-acroread                                      24    15    24
-acroread-nppdf                                24    15    24
-IglooFTP-PRO                                  20    20    20
-interbase                                      0    15    15
-interbase-docs                                 0    15    15
-civctp-demo                                   22     0    20
-compupic                                      19     0    19
-commercial-menu                               50    40    50
-eus-demo                                      23     0    20
-myth2-demo                                    24     0    25
-macromedia-flash                              45    15    45
-RealPlayer                                    27    15    27
-RealPlayer-rpnp                               27    15    27
-scol                                          23     0    23
-avp-database                                  20    20    20
-avp-linux                                     20    20    20
-arkeia-arkc                                    0    20     0
-arkeia-client                                 20     0    20
-arkeia-gui                                    24     0    20
-arkeia-server-shareware                        0    30     0
-Artstream                                     20     0     0
-citrix-icaclient-en                          -70   -70   -70
-citrix-icaclient-fr                          -70   -70   -70
-citrix-icaclient-ge                          -70   -70   -70
-citrix-icaclient-sp                          -70   -70   -70
-printpro                                       0     0     0
-printpro-agfa                                  0     0     0
-printpro-alps                                  0     0     0
-printpro-apple                                 0     0     0
-printpro-autologic		               0     0     0
-printpro-calcomp		               0     0     0
-printpro-canon			               0     0     0
-printpro-digital		               0     0     0
-printpro-efi			               0     0     0
-printpro-encad			               0     0     0
-printpro-epson			               0     0     0
-printpro-hp			               0     0     0
-printpro-ibm			               0     0     0
-printpro-lexmark		               0     0     0
-printpro-lhag			               0     0     0
-printpro-linotronic		               0     0     0
-printpro-nec			               0     0     0
-printpro-oki			               0     0     0
-printpro-otheram		               0     0     0
-printpro-othernz		               0     0     0
-printpro-qms			               0     0     0
-printpro-seiko			               0     0     0
-printpro-sony			               0     0     0
-printpro-tektronix		               0     0     0
-printpro-ti			               0     0     0
-printpro-varityper		               0     0     0
-printpro-xerox                                 0     0     0
-emumail4.0                                     0    20     0
-EnlightenDSMFree                               0    24     0
-EnlightenDSMFree-dsa                           0    24     0
-EnlightenDSMFree-gui                           0    24     0
-ForteCE-FCS                                    0     0    30
-ViaVoice_Outloud_rtk                           0     0    45
-ViaVoice_Outloud_sdk                           0     0    45
-ViaVoice_runtime                               0     0    45
-ViaVoice_sdk                                   0     0    45
-jdk-sun                                        0     0    35
-jdk-sun-doc                                    0     0    35
-jre-sun                                       20     0    35
-heretic2-demo                                 24     0    24
-heroes3-demo                                  24     0    24
-rt2-demo                                      24     0    24
-MainActor                                     24     0     0
-mupad                                         20     0    20
-mtv                                           24     0    24
-mtv-fullscreen-extension                      15     0    15
-NetPartitioner                                 0    24     0
-omnimark                                       0     0    35
-rebol-core                                     0     0    30
-staroffice-de                                -64   -90   -64
-staroffice-en                                -64   -90   -64
-staroffice-fr                                -64   -90   -64
-staroffice-it                                -64   -90   -64
-staroffice-nl                                -64   -90   -64
-staroffice-pt                                -64   -90   -64
-staroffice-es                                -64   -90   -64
-staroffice-sv                                -64   -90   -64
-tina-base                                      0     0     0
-tina-lesstif                                   0     0     0
-tina-oracle80                                  0     0     0
-tina-oracle8i                                  0     0     0
-tina-server                                    0     0     0
-VMware                                        20     0    35
-VariCAD                                       24     0    24
-ViaVoice_runtime                              26     0    26
-<<<<<<< compssList
-viavoicemenu				      26     0    26
-=======
-viavoicemenu                                  26     0    26
->>>>>>> 1.139
-kisdn                                          0     0     0
diff --git a/perl-install/share/compssUsers b/perl-install/share/compssUsers
deleted file mode 100644
index 7becfcfd4..000000000
--- a/perl-install/share/compssUsers
+++ /dev/null
@@ -1,92 +0,0 @@
-     # --- Workstation
-
-Office Workstation [icon=office] [path=Workstation] [descr=Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc]
-	OFFICE
-	PUBLISHING
-	PIM
-
-Game station [icon=arcade] [path=Workstation] [descr=Amusement programs: arcade, boards, strategy, etc]
-	GAMES
-
-Multimedia station [icon=multimedia] [path=Workstation] [descr=Sound and video playing/editing programs]
-	AUDIO
-	VIDEO
-	GRAPHICS
-
-Internet station [icon=networking] [path=Workstation] [descr=Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web]
-	NETWORKING_WWW
-	NETWORKING_MAIL
-	NETWORKING_NEWS
-	COMMUNICATIONS
-	NETWORKING_CHAT
-	NETWORKING_FILE_TRANSFER
-	NETWORKING_IRC
-	NETWORKING_INSTANT_MESSAGING
-	NETWORKING_DNS
-
-Network Computer (client) [icon=terminals] [path=Workstation] [descr=Clients for different protocols including ssh]
-	NETWORKING_REMOTE_ACCESS
-	NETWORKING_FILE
-
-Configuration [icon=configuration] [path=Workstation] [descr=Tools to ease the configuration of your computer]
-	CONFIG
-        WEBMIN
-
-Scientific Workstation [icon=sciences] [path=Workstation] [descr=]
-	SCIENCES
-
-Console Tools [icon=terminals] [path=Workstation] [descr=Editors, shells, file tools, terminals]
-	EDITORS
-	TERMINALS
-	TEXT_TOOLS
-	SHELLS
-	FILE_TOOLS
-
-     # --- Graphical Environment
-
-KDE Workstation [icon=kde] [path=Graphical Environment] [descr=The K Desktop Environment, the basic graphical environment with a collection of accompanying tools]
-	KDE
-	X
-
-Gnome Workstation [icon=gnome] [path=Graphical Environment] [descr=A graphical environment with user-friendly set of applications and desktop tools]
-	GNOME
-	X
-
-Other Graphical Desktops [icon=windowmanager] [path=Graphical Environment] [descr=Icewm, Window Maker, Enlightenment, Fvwm, etc]
-	GRAPHICAL_DESKTOP
-	X
-
-
-     # --- Development
-
-Development [icon=editors] [path=Development] [descr=C and C++ development libraries, programs and include files]
-	DEVELOPMENT
-	EDITORS
-
-Documentation [icon=documentation] [path=Development] [descr=Books and Howto's on Linux and Free Software]
-	BOOKS
-
-     # --- Server
-
-Web/FTP  [icon=file_transfer] [path=Server] [descr=Apache, Pro-ftpd]
-	NETWORKING_WWW_SERVER
-	NETWORKING_FILE_TRANSFER_SERVER
-
-Mail/Groupware/News [icon=mail] [path=Server] [descr=Postfix mail server, Inn news server]
-	NETWORKING_MAIL_SERVER
-	NETWORKING_NEWS_SERVER
-
-Database [icon=archiving] [path=Server] [descr=PostgreSQL or MySQL database server]
-	DATABASES
-	DATABASES_SERVER
-
-Firewall/Router [icon=networking] [path=Server] [descr=Internet gateway]
-	NETWORKING_FIREWALLING_SERVER
-
-DNS/NIS [icon=hardware] [path=Server] [descr=Domain Name and Network Information Server] 
-	NIS_SERVER
-	NETWORKING_DNS_SERVER
-
-Network Computer server [icon=networking] [path=Server] [descr=NFS server, SMB server, Proxy server, ssh server]
-	NETWORKING_FILE_SERVER
-	NETWORKING_REMOTE_ACCESS_SERVER
diff --git a/perl-install/share/compssUsers.desktop b/perl-install/share/compssUsers.desktop
deleted file mode 100644
index f836d6731..000000000
--- a/perl-install/share/compssUsers.desktop
+++ /dev/null
@@ -1,39 +0,0 @@
-Office [icon=office] [descr=Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc]
-	Office
-
-Internet [icon=networking] [descr=Set of tools for mail, news, web, file transfer, and chat]
-	Networking
-
-Games [icon=amusement] [descr=Amusement programs: arcade, boards, strategy, etc]
-	Games
-
-Multimedia - Graphics [icon=graphics] [descr=Graphics programs such as The Gimp]
-	Graphics
-
-Multimedia - Sound [icon=multimedia] [descr=Audio-related tools: mp3 or midi players, mixers, etc]
-	Sound
-
-Multimedia - Video [icon=video] [descr=Video players and editors]
-	Video
-
-Multimedia - CD Burning [icon=cd_burning] [descr=Tools to create and burn CD's]
-	Archiving/Cd burning
-
-More Graphical Desktops (Gnome, IceWM) [icon=windowmanager] [descr=Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc]
-	Graphical desktop/GNOME
-	Graphical desktop/Sawmill
-	Graphical desktop/Icewm
-	+XFree86-75dpi-fonts
-	+fonts-ttf-west_european
-
-Personal Information Management [icon=remote_access] [descr=Tools for your Palm Pilot or your Visor]
-	+jpilot
-	+pilot-link
-	+kde-pim
-	+gnome-pim
-	+gnome-pim-conduits
-
-Personal Finance [icon=sciences] [descr=Programs to manage your finance, such as gnucash]
-	+gnucash
-	+MoneyDance
-
diff --git a/perl-install/share/compssUsers.server b/perl-install/share/compssUsers.server
deleted file mode 100644
index ac384122e..000000000
--- a/perl-install/share/compssUsers.server
+++ /dev/null
@@ -1,67 +0,0 @@
-     # --- Graphical Environment
-
-KDE Workstation [icon=kde] [path=Graphical Environment] [descr=The K Desktop Environment, the basic graphical environment with a collection of accompanying tools]
-	KDE
-	X
-
-Gnome Workstation [icon=gnome] [path=Graphical Environment] [descr=A graphical environment with user-friendly set of applications and desktop tools]
-	GNOME
-	X
-
-Other Graphical Desktops [icon=windowmanager] [path=Graphical Environment] [descr=XFce, Window Maker, IceWm]
-	GRAPHICAL_DESKTOP
-	X
-
-     # --- Development
-
-Development [icon=editors] [path=Development] [descr=C and C++ development libraries, programs and include files]
-	DEVELOPMENT
-
-Documentation [icon=documentation] [path=Development] [descr=Books and Howto's on Linux and Free Software]
-	BOOKS
-
-     # --- Server
-
-Web Server  [icon=file_transfer] [path=Server] [descr=Apache]
-	NETWORKING_WWW_SERVER
-
-Groupware [icon=mail] [path=Server] [descr=PHPgroupware]
-	NETWORKING_GROUPWARE_SERVER
-
-Firewall/Router [icon=networking] [path=Server] [descr=Internet gateway]
-	NETWORKING_FIREWALLING_SERVER
-
-Mail/News [icon=mail] [path=Server] [descr=Postfix mail server, Inn news server]
-	NETWORKING_MAIL_SERVER
-	NETWORKING_NEWS_SERVER
-
-Directory Server [icon=mail] [path=Server] [descr=LDAP server]
-	NETWORKING_LDAP_SERVER
-
-FTP Server [icon=file_transfer] [path=Server] [descr=Wu-FTPd]
-	NETWORKING_FILE_TRANSFER_SERVER
-
-DNS/NIS [icon=hardware] [path=Server] [descr=Domain Name and Network Information Server] 
-	NIS_SERVER
-	NETWORKING_DNS_SERVER
-
-File & Printer Sharing Server [icon=archiving] [path=Server] [descr=NFS server, Samba server] 
-	NETWORKING_FILE_SERVER
-
-Database [icon=archiving] [path=Server] [descr=PostgreSQL or MySQL database server]
-	DATABASES
-	DATABASES_SERVER
-
-     # --- Utilities
-
-SSH server [icon=networking] [path=Utilities] [descr=ssh server]
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-Webmin [icon=archiving] [path=Utilities] [descr=webmin remote configuration server]
-	WEBMIN
-
-Network Utilities/Monitoring [icon=archiving] [path=Utilities] [descr=Monitoring tools, processes accounting, tcpdump, nmap, ...]
-	MONITORING	
-
-MandrakeSoft Wizards [icon=archiving] [path=Utilities] [descr=Wizards to configure servers]
-	WIZARDS
diff --git a/perl-install/share/consolefonts/Cyr_a8x16 b/perl-install/share/consolefonts/Cyr_a8x16
deleted file mode 100644
index a09ac03d8..000000000
--- a/perl-install/share/consolefonts/Cyr_a8x16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/lat0-sun16 b/perl-install/share/consolefonts/lat0-sun16
deleted file mode 100644
index 19e3d432e..000000000
--- a/perl-install/share/consolefonts/lat0-sun16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/lat2-sun16 b/perl-install/share/consolefonts/lat2-sun16
deleted file mode 100644
index 509e5def2..000000000
--- a/perl-install/share/consolefonts/lat2-sun16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/ruscii_8x16 b/perl-install/share/consolefonts/ruscii_8x16
deleted file mode 100644
index b0513a9db..000000000
--- a/perl-install/share/consolefonts/ruscii_8x16
+++ /dev/null
diff --git a/perl-install/share/diskdrake.rc b/perl-install/share/diskdrake.rc
deleted file mode 100644
index 317fc2684..000000000
--- a/perl-install/share/diskdrake.rc
+++ /dev/null
@@ -1,43 +0,0 @@
-style "font"
-{
-  fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-1,*-r-*"
-}
-
-style "red" = "font"
-{
-  bg[NORMAL] = { 1.0, 0, 0 }
-  bg[PRELIGHT] = { 0.9, 0, 0 }
-}
-style "darkred" = "font"
-{
-  bg[NORMAL] = { 0.7, 0, 0 }
-  bg[PRELIGHT] = { 0.6, 0, 0 }
-}
-style "green" = "font"
-{
-  bg[NORMAL] = { 0, 1.0, 0 }
-  bg[PRELIGHT] = { 0, 0.9, 0 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-style "blue" = "font"
-{
-  bg[NORMAL] = { 0, 0, 1.0 }
-  bg[PRELIGHT] = { 0, 0, 0.9 }
-}
-style "white" = "font"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-
-widget "*Linux*"      style "red" 
-widget "*Ext2*"       style "red" 
-widget "*Journalised FS*"   style "darkred" 
-widget "*Linux swap*" style "green"
-widget "*Swap*"       style "green"
-widget "*FAT*"        style "blue"
-widget "*SunOS*"      style "blue"
-widget "*NT NTFS*"    style "blue"
-widget "*Empty*"      style "white"
-widget "*Other*"      style "font"
diff --git a/perl-install/share/floppy.png b/perl-install/share/floppy.png
deleted file mode 100644
index 2265e6ec6..000000000
--- a/perl-install/share/floppy.png
+++ /dev/null
diff --git a/perl-install/share/fonts.tar.bz2 b/perl-install/share/fonts.tar.bz2
deleted file mode 100644
index a663faa8f..000000000
--- a/perl-install/share/fonts.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/ftin.png b/perl-install/share/ftin.png
deleted file mode 100644
index 3cec3c194..000000000
--- a/perl-install/share/ftin.png
+++ /dev/null
diff --git a/perl-install/share/ftout.png b/perl-install/share/ftout.png
deleted file mode 100644
index d821716eb..000000000
--- a/perl-install/share/ftout.png
+++ /dev/null
diff --git a/perl-install/share/gen_locales.sh b/perl-install/share/gen_locales.sh
deleted file mode 100755
index 249db5c1a..000000000
--- a/perl-install/share/gen_locales.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-
-rm -rf .tmp ; mkdir .tmp ; cd .tmp
-tar xfj ../locales-skeleton.tar.bz2
-
-# locale utf-8
-for i in LC_ADDRESS LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_MESSAGES/SYS_LC_MESSAGES ; do
-    cp -f /usr/share/locale/UTF-8/$i usr/share/locale/UTF-8/$i
-done
-
-# lc_ctype for common encoding
-for i in CP1251 ISO-8859-13 ISO-8859-14 ISO-8859-15 ISO-8859-2 ISO-8859-3 ISO-8859-7 ISO-8859-9 ISO-8859-9E ; do
-    f=usr/share/locale/$i/LC_CTYPE
-    [ -e /$f ] || { echo missing /$f ; exit 1 ; }
-    cp -f /$f $f
-done
-
-rm -rf .tmp2 ; mkdir .tmp2 ; cd .tmp2
-for i in hy ja ko th vi ; do
-    ii=locales-`echo $i | sed 's/\(..\).*/\1/'`
-    rpm2cpio /RPMS/$ii-*.rpm | cpio -id --quiet
-    f=usr/share/locale/$i/LC_CTYPE
-    [ -e $f ] || { echo missing $f in package $ii ; exit 1 ; }
-    cp -f $f ../$f
-    rm -rf *
-done
-cd .. ; rm -rf .tmp2
-
-# special case for chineese (why is it needed?)
-rm -rf .tmp2 ; mkdir .tmp2 ; cd .tmp2
-for i in zh_CN.GB2312 zh_TW.Big5 ; do
-    ii=locales-`echo $i | sed 's/\(..\).*/\1/'`
-    rpm2cpio /RPMS/$ii-*.rpm | cpio -id --quiet
-    for f in LC_ADDRESS LC_COLLATE LC_CTYPE LC_IDENTIFICATION LC_MEASUREMENT LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_MESSAGES/SYS_LC_MESSAGES ; do
-	f=usr/share/locale/$i/$f
-	[ -e $f ] || { echo missing $f in package $ii ; exit 1 ; }
-	cp -f $f ../$f
-    done
-    rm -rf *
-done
-cd .. ; rm -rf .tmp2
-
-for i in common  C armscii-8 en_US.UTF-8 iso8859-1 iso8859-13 iso8859-14 iso8859-15 iso8859-2 iso8859-3 iso8859-5 iso8859-7 iso8859-9 iso8859-9e ja ko koi8-r koi8-u microsoft-cp1251 microsoft-cp1255 microsoft-cp1256 th_TH vi_VN.tcvn zh_CN zh_TW.big5 ; do
-    cp -a /usr/X11R6/lib/X11/locale/$i usr/X11R6/lib/X11/locale
-done
-
-tar cfj ../locales.tar.bz2 usr
-
-cd .. ; rm -rf .tmp
diff --git a/perl-install/share/help.png b/perl-install/share/help.png
deleted file mode 100644
index ddebe33ad..000000000
--- a/perl-install/share/help.png
+++ /dev/null
diff --git a/perl-install/share/install.rc b/perl-install/share/install.rc
deleted file mode 100644
index b86a22c29..000000000
--- a/perl-install/share/install.rc
+++ /dev/null
@@ -1,21 +0,0 @@
-style "default-font" 
-{
-  fontset = "-*-*-medium-r-normal-*-12-*-*-*-*-*-iso8859-15"
-}
-
-style "small-font"
-{
-  fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-15"
-}
-
-style "logo" = "background"
-{
-  # no background image
-  engine "pixmap" { image { function = FLAT_BOX } }
-}
-
-widget "*" style "default-font"
-widget "Steps" style "steps"
-widget "*Steps*" style "small-font"
-widget "*logo*" style "logo"
-
diff --git a/perl-install/share/keyboards.tar.bz2 b/perl-install/share/keyboards.tar.bz2
deleted file mode 100644
index 62939096c..000000000
--- a/perl-install/share/keyboards.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/keymaps.tar.bz2 b/perl-install/share/keymaps.tar.bz2
deleted file mode 100644
index 8ca03c137..000000000
--- a/perl-install/share/keymaps.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/keymaps_generate b/perl-install/share/keymaps_generate
deleted file mode 100755
index 0265502c9..000000000
--- a/perl-install/share/keymaps_generate
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use keyboard;
-
-my $dir = "keymaps/usr/share/keymaps";
-system("rm -rf keymaps ; mkdir -p keymaps/usr/share/keymaps");
-
-foreach (keyboard::keyboards()) {
-    my $kmap = keyboard::keyboard2kmap($_);
-    if (system("./kmap2bkmap $kmap > $dir/$kmap.bkmap 2>/dev/null") != 0) {
-	warn "unknown kmap $kmap\n";
-	unlink "$dir/$kmap.bkmap";
-    }
-}
-
-system("tar cfj keymaps.tar.bz2 -C keymaps usr") == 0 or die;
-system("rm -rf keymaps");
diff --git a/perl-install/share/kmap2bkmap b/perl-install/share/kmap2bkmap
deleted file mode 100755
index 3aff35c3e..000000000
--- a/perl-install/share/kmap2bkmap
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use c;
-
-my $KMAP_MAGIC = 0x8B39C07F;
-
-BEGIN { @ARGV == 1 or die "usage: kmap2bkmap <keymap>\n" }
-
-system("sudo loadkeys $ARGV[0]") == 0 or die;
-open F, "dumpkeys -n -f |";
-<F> =~ /^keymaps\s+(.*)/ or die;
-foreach (split ',', $1) {
-    my @l = /(\d+)-(\d+)/;
-    my ($i, $j) = @l ? @l : ($_,$_);
-    $keymaps[$_] = 1 foreach $i .. $j;
-}
-
-print pack("I", $KMAP_MAGIC);
-print map { pack "i", $keymaps[$_] || 0 } 0 .. c::MAX_NR_KEYMAPS()-1;
-
-foreach (<F>) {
-    s/\+0x/0x/g;
-    my ($keycode, $key, undef, @l) = split;
-    $keycode eq 'keycode' or next;
-    my $i = 0;
-    $L[$i++][$key] = hex $_ foreach @l;
-}
-close F or die "dumpkeys failed";
-
-foreach (@L) {
-    foreach my $i (0 .. c::NR_KEYS()-1) {
-	print pack "s", defined $_->[$i] ? $_->[$i] : 0x200;
-    }
-}
-
-exit 0;
diff --git a/perl-install/share/list b/perl-install/share/list
deleted file mode 100644
index 40465730b..000000000
--- a/perl-install/share/list
+++ /dev/null
@@ -1,168 +0,0 @@
-/bin/ash
-/bin/consolechars
-/bin/cpio
-/bin/gzip
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/etc/imrc
-/etc/im_palette.pal
-/sbin/badblocks
-/sbin/e2fsck
-/sbin/tune2fs
-/sbin/fdisk
-/sbin/insmod
-/sbin/losetup
-/sbin/mke2fs
-/sbin/modinfo
-/sbin/resize2fs
-/sbin/dumpe2fs
-/sbin/modinfo
-/usr/X11R6/lib/modules/xf86Wacom.so
-/usr/bin/bzip2
-/usr/bin/fb2png
-/usr/bin/packdrake
-/usr/bin/parsehdlist
-/usr/bin/perl
-/usr/lib/gconv/BIG5.so
-/usr/lib/gconv/EUC-JP.so
-/usr/lib/gconv/libGB.so
-/usr/lib/gconv/libJIS.so
-/usr/lib/gconv/libKSC.so
-/usr/lib/gconv/EUC-KR.so
-/usr/lib/gconv/ISO8859-15.so
-/usr/lib/gconv/ISO8859-14.so
-/usr/lib/gconv/ISO8859-13.so
-/usr/lib/gconv/ISO8859-9E.so
-/usr/lib/gconv/ISO8859-9.so
-/usr/lib/gconv/ISO8859-7.so
-/usr/lib/gconv/ISO8859-5.so
-/usr/lib/gconv/ISO8859-3.so
-/usr/lib/gconv/ISO8859-2.so
-/usr/lib/gconv/ISO8859-1.so
-/usr/lib/gconv/KOI8-K.so
-/usr/lib/gconv/KOI8-U.so
-/usr/lib/gconv/KOI8-R.so
-/usr/lib/gconv/TIS-620.so
-/usr/lib/gconv/CP1251.so
-/usr/lib/gconv/GEORGIAN-PS.so
-/usr/lib/gconv/EUC-CN.so
-/usr/lib/gconv/gconv-modules
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/PERL_VERSION/AutoLoader.pm
-/usr/lib/perl5/PERL_VERSION/Carp.pm
-/usr/lib/perl5/PERL_VERSION/Carp/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/Exporter.pm
-/usr/lib/perl5/PERL_VERSION/Exporter/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/FileHandle.pm
-/usr/lib/perl5/PERL_VERSION/SelectSaver.pm
-/usr/lib/perl5/PERL_VERSION/SelfLoader.pm
-/usr/lib/perl5/PERL_VERSION/Symbol.pm
-/usr/lib/perl5/PERL_VERSION/Time/Local.pm
-/usr/lib/perl5/PERL_VERSION/IO/Socket/INET.pm
-/usr/lib/perl5/PERL_VERSION/IO/Socket/UNIX.pm
-/usr/lib/perl5/PERL_VERSION/dumpvar.pl
-/usr/lib/perl5/PERL_VERSION/warnings.pm
-/usr/lib/perl5/PERL_VERSION/warnings/register.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/File/Glob.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/File/Glob/Glob.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Config.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Data/Dumper.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/DynaLoader.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Errno.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Fcntl.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/XSLoader.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/File.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Handle.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Seekable.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Select.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Socket.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Socket.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/_h2ph_pre.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/asm/unistd.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/IO/IO.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Socket/Socket.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/bits/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/sys/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/DynaLoader/dl_findfile.al
-/usr/lib/perl5/PERL_VERSION/lib.pm
-/usr/lib/perl5/PERL_VERSION/overload.pm
-/usr/lib/perl5/PERL_VERSION/strict.pm
-/usr/lib/perl5/PERL_VERSION/vars.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/DataStructure.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/File.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Func.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Globals.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Math.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/String.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/System.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common/Various.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/MDK/Common.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Cmd.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Config.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/Net/Netrc.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/packdrake.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/Gtk/Gdk/ImlibImage.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/auto/Gtk/Gtk.so
-/usr/lib/perl5/site_perl/PERL_VERSION/ARCH-linux/auto/Gtk/Gdk/ImlibImage/ImlibImage.so
-/usr/lib/rpm/rpmrc
-/usr/lib/rpm/macros
-/sbin/rescuept
-/usr/share/icons/amusement_section.png
-/usr/share/icons/arcade_section.png
-/usr/share/icons/cd_burning_section.png
-/usr/share/icons/chat_section.png
-/usr/share/icons/default_section.png
-/usr/share/icons/documentation_section.png
-/usr/share/icons/gnome.xpm
-/usr/share/icons/graphics_section.png
-/usr/share/icons/kde.xpm
-/usr/share/icons/multimedia_section.png
-/usr/share/icons/development_section.png
-/usr/share/icons/networking_section.png
-/usr/share/icons/mail_section.png
-/usr/share/icons/archiving_section.png
-/usr/share/icons/hardware_section.png
-/usr/share/icons/file_transfer_section.png
-/usr/share/icons/office_section.png
-/usr/share/icons/remote_access_section.png
-/usr/share/icons/sciences_section.png
-/usr/share/icons/video_section.png
-/usr/share/icons/windowmanager_section.png
-/usr/share/icons/editors_section.png
-/usr/share/icons/terminals_section.png
-/usr/share/icons/configuration_section.png
-/usr/share/ldetect-lst/Cards+
-/usr/share/ldetect-lst/CardsNames
-/usr/share/ldetect-lst/MonitorsDB
-/usr/share/ldetect-lst/isdn.db
-/usr/share/ldetect-lst/pcitable
-/usr/share/ldetect-lst/usbtable
-
-/sbin/pvcreate
-/sbin/pvdisplay
-/sbin/vgchange
-/sbin/vgcreate
-/sbin/vgdisplay
-/sbin/vgextend
-/sbin/vgremove
-/sbin/vgscan
-/sbin/lvcreate
-/sbin/lvdisplay
-/sbin/lvextend
-/sbin/lvreduce
-/sbin/lvremove
diff --git a/perl-install/share/list.alpha b/perl-install/share/list.alpha
deleted file mode 100644
index 7ce1a1fee..000000000
--- a/perl-install/share/list.alpha
+++ /dev/null
@@ -1,13 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/raidstart
-/sbin/ifport
-/sbin/mkdosfs
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_VGA16
-/usr/X11R6/bin/XF86_3DLabs
-/usr/X11R6/bin/XF86_SVGA
-/usr/X11R6/bin/XF86_TGA
-/usr/X11R6/bin/XF86_S3
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/list.i386 b/perl-install/share/list.i386
deleted file mode 100644
index d7735f29c..000000000
--- a/perl-install/share/list.i386
+++ /dev/null
@@ -1,11 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/mkfs.jfs
-/sbin/mkfs.xfs
-/sbin/raidstart
-/sbin/ifport
-/sbin/mkdosfs
-/sbin/resize_reiserfs
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_VGA16
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/list.ia64 b/perl-install/share/list.ia64
deleted file mode 100644
index 9bbf999cb..000000000
--- a/perl-install/share/list.ia64
+++ /dev/null
@@ -1,119 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/mkfs.xfs
-/sbin/raidstart
-/sbin/mkdosfs
-/sbin/resize_reiserfs
-/usr/bin/strace
-/var/log/XFree86.0.log
-/usr/X11R6/bin/XFree86
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/
-/usr/X11R6/lib/modules/codeconv
-/usr/X11R6/lib/modules/codeconv/libARABIC.a
-/usr/X11R6/lib/modules/codeconv/libARMSCII8.a
-/usr/X11R6/lib/modules/codeconv/libBIG5.a
-/usr/X11R6/lib/modules/codeconv/libDOSENCODING.a
-/usr/X11R6/lib/modules/codeconv/libGB2312.a
-/usr/X11R6/lib/modules/codeconv/libGEORGIAN.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_1.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_10.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_11.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_14.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_15.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_2.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_3.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_4.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_5.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_6.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_7.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_8.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_9.a
-/usr/X11R6/lib/modules/codeconv/libJISX0201.a
-/usr/X11R6/lib/modules/codeconv/libJISX0208.a
-/usr/X11R6/lib/modules/codeconv/libJISX0212.a
-/usr/X11R6/lib/modules/codeconv/libKOI8.a
-/usr/X11R6/lib/modules/codeconv/libKSC5601.a
-/usr/X11R6/lib/modules/codeconv/libKSCJOHAB.a
-/usr/X11R6/lib/modules/codeconv/libMULEENCODING.a
-/usr/X11R6/lib/modules/codeconv/libTCVN.a
-/usr/X11R6/lib/modules/codeconv/libVISCII.a
-/usr/X11R6/lib/modules/dri
-/usr/X11R6/lib/modules/dri/gamma_dri.so
-/usr/X11R6/lib/modules/dri/i810_dri.so
-/usr/X11R6/lib/modules/dri/mga_dri.so
-/usr/X11R6/lib/modules/dri/r128_dri.so
-/usr/X11R6/lib/modules/dri/sis_dri.so
-/usr/X11R6/lib/modules/drivers
-/usr/X11R6/lib/modules/drivers/ati_drv.o
-/usr/X11R6/lib/modules/drivers/atimisc_drv.o
-/usr/X11R6/lib/modules/drivers/fbdev_drv.o
-/usr/X11R6/lib/modules/drivers/glint_drv.o
-/usr/X11R6/lib/modules/drivers/i740_drv.o
-/usr/X11R6/lib/modules/drivers/linux
-/usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
-/usr/X11R6/lib/modules/drivers/mga_drv.o
-/usr/X11R6/lib/modules/drivers/nv_drv.o
-/usr/X11R6/lib/modules/drivers/r128_drv.o
-/usr/X11R6/lib/modules/drivers/radeon_drv.o
-/usr/X11R6/lib/modules/drivers/rendition_drv.o
-/usr/X11R6/lib/modules/drivers/s3virge_drv.o
-/usr/X11R6/lib/modules/drivers/sis_drv.o
-/usr/X11R6/lib/modules/drivers/tdfx_drv.o
-/usr/X11R6/lib/modules/drivers/vga_drv.o
-/usr/X11R6/lib/modules/extensions
-/usr/X11R6/lib/modules/extensions/libGLcore.a
-/usr/X11R6/lib/modules/extensions/libdbe.a
-/usr/X11R6/lib/modules/extensions/libdri.a
-/usr/X11R6/lib/modules/extensions/libextmod.a
-/usr/X11R6/lib/modules/extensions/libglx.a
-/usr/X11R6/lib/modules/extensions/librecord.a
-/usr/X11R6/lib/modules/extensions/libxie.a
-/usr/X11R6/lib/modules/fonts
-/usr/X11R6/lib/modules/fonts/libbitmap.a
-/usr/X11R6/lib/modules/fonts/libfreetype.a
-/usr/X11R6/lib/modules/fonts/libspeedo.a
-/usr/X11R6/lib/modules/fonts/libtype1.a
-/usr/X11R6/lib/modules/fonts/libxtt.a
-/usr/X11R6/lib/modules/input
-/usr/X11R6/lib/modules/input/citron_drv.o
-/usr/X11R6/lib/modules/input/digitaledge_drv.o
-/usr/X11R6/lib/modules/input/dynapro_drv.o
-/usr/X11R6/lib/modules/input/elographics_drv.o
-/usr/X11R6/lib/modules/input/microtouch_drv.o
-/usr/X11R6/lib/modules/input/mouse_drv.o
-/usr/X11R6/lib/modules/input/mutouch_drv.o
-/usr/X11R6/lib/modules/input/spaceorb_drv.o
-/usr/X11R6/lib/modules/input/summa_drv.o
-/usr/X11R6/lib/modules/input/void_drv.o
-/usr/X11R6/lib/modules/input/wacom_drv.o
-/usr/X11R6/lib/modules/libafb.a
-/usr/X11R6/lib/modules/libcfb.a
-/usr/X11R6/lib/modules/libcfb16.a
-/usr/X11R6/lib/modules/libcfb24.a
-/usr/X11R6/lib/modules/libcfb32.a
-/usr/X11R6/lib/modules/libddc.a
-/usr/X11R6/lib/modules/libfb.a
-/usr/X11R6/lib/modules/libi2c.a
-/usr/X11R6/lib/modules/libint10.a
-/usr/X11R6/lib/modules/libmfb.a
-/usr/X11R6/lib/modules/libpcidata.a
-/usr/X11R6/lib/modules/librac.a
-/usr/X11R6/lib/modules/libramdac.a
-/usr/X11R6/lib/modules/libscanpci.a
-/usr/X11R6/lib/modules/libshadow.a
-/usr/X11R6/lib/modules/libshadowfb.a
-/usr/X11R6/lib/modules/libvbe.a
-/usr/X11R6/lib/modules/libvgahw.a
-/usr/X11R6/lib/modules/libxaa.a
-/usr/X11R6/lib/modules/libxf1bpp.a
-/usr/X11R6/lib/modules/libxf24_32bpp.a
-/usr/X11R6/lib/modules/libxf4bpp.a
-/usr/X11R6/lib/modules/libxf8_16bpp.a
-/usr/X11R6/lib/modules/libxf8_32bpp.a
-/usr/X11R6/lib/modules/linux
-/usr/X11R6/lib/modules/linux/libdrm.a
-/usr/X11R6/lib/modules/linux/libfbdevhw.a
-/usr/X11R6/lib/modules/v10002d.uc
-/usr/X11R6/lib/modules/v20002d.uc
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/asm/break.ph
diff --git a/perl-install/share/list.ppc b/perl-install/share/list.ppc
deleted file mode 100644
index 332c97dc2..000000000
--- a/perl-install/share/list.ppc
+++ /dev/null
@@ -1,15 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/raidstart
-/usr/bin/hformat
-/usr/bin/hmount
-/usr/bin/humount
-/usr/bin/hattrib
-/usr/bin/hcopy
-/usr/bin/hcd
-/sbin/pdisk
-/usr/X11R6/bin/Xpmac
-/usr/X11R6/bin/xmodmap
-/sbin/mkfs.xfs
-/sbin/mkfs.jfs
-
diff --git a/perl-install/share/list.sparc b/perl-install/share/list.sparc
deleted file mode 100644
index b597a10ce..000000000
--- a/perl-install/share/list.sparc
+++ /dev/null
@@ -1,84 +0,0 @@
-/bin/cpio
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/sbin/mkreiserfs
-/sbin/fdisk
-/sbin/ifport
-/sbin/insmod
-/sbin/mkraid
-/sbin/rmmod
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/raidstart
-/sbin/losetup
-/usr/bin/genromfs
-/usr/bin/bzip2
-/usr/bin/perl
-/usr/lib/libimlib-png.so
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/PERL_VERSION/AutoLoader.pm
-/usr/lib/perl5/PERL_VERSION/Carp.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Data/Dumper.pm
-/usr/lib/perl5/PERL_VERSION/Exporter.pm
-/usr/lib/perl5/PERL_VERSION/Carp/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/Exporter/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/FileHandle.pm
-/usr/lib/perl5/PERL_VERSION/SelectSaver.pm
-/usr/lib/perl5/PERL_VERSION/SelfLoader.pm
-/usr/lib/perl5/PERL_VERSION/Symbol.pm
-/usr/lib/perl5/PERL_VERSION/Time/Local.pm
-/usr/lib/perl5/PERL_VERSION/dumpvar.pl
-/usr/lib/perl5/PERL_VERSION/warnings.pm
-/usr/lib/perl5/PERL_VERSION/warnings/register.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/File/Glob.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/File/Glob/Glob.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/File/Glob/Glob.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Config.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/XSLoader.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/DynaLoader.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Fcntl.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/File.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Handle.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Seekable.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Socket.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Socket.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/_h2ph_pre.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm-sparc/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm-sparc64/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/IO/IO.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Socket/Socket.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/bits/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/sys/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/DynaLoader/dl_findfile.al
-/usr/lib/perl5/PERL_VERSION/lib.pm
-/usr/lib/perl5/PERL_VERSION/overload.pm
-/usr/lib/perl5/PERL_VERSION/strict.pm
-/usr/lib/perl5/PERL_VERSION/vars.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Gtk.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/auto/Gtk/Gtk.so
-/usr/lib/rpm/rpmrc
-/usr/X11R6/bin/Xsun24
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/XF86_3DLabs
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/locales-skeleton.tar.bz2 b/perl-install/share/locales-skeleton.tar.bz2
deleted file mode 100644
index 113f3300a..000000000
--- a/perl-install/share/locales-skeleton.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/logo-mandrake.png b/perl-install/share/logo-mandrake.png
deleted file mode 100644
index 5b754bef3..000000000
--- a/perl-install/share/logo-mandrake.png
+++ /dev/null
diff --git a/perl-install/share/makedev.sh b/perl-install/share/makedev.sh
deleted file mode 100755
index e9dccaff2..000000000
--- a/perl-install/share/makedev.sh
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-#
-# $Id$
-#
-# This script creates all ISDN devices under /dev .
-# Many/most distributions don't include these devices.
-
-echo -e "Creating device inodes ... \c"
-
-if [ $# = 1 ] ; then
-	DEV=$1/dev
-else
-	DEV=/dev
-fi
-
-MAJ=45
-MIN=0
-rm -f $DEV/isdnctrl* $DEV/ippp*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 600 $DEV/isdn$MIN c $MAJ $MIN
-	mknod -m 660 $DEV/isdnctrl$MIN c $MAJ `expr $MIN + 64`
-	mknod -m 600 $DEV/ippp$MIN c $MAJ `expr $MIN + 128`
-	MIN=`expr $MIN + 1`
-done
-if   grep '^pppusers:' /etc/group > /dev/null
-then	# RH 5 standard
-	chgrp pppusers $DEV/isdnctrl* $DEV/ippp*
-elif grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/isdnctrl* $DEV/ippp*
-fi
-rm -f $DEV/isdninfo
-mknod -m 444 $DEV/isdninfo c $MAJ 255
-ln -sf $DEV/isdnctrl0 $DEV/isdnctrl
-
-MAJ=43
-MIN=0
-rm -f $DEV/ttyI*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 666 $DEV/ttyI$MIN c $MAJ $MIN
-	MIN=`expr $MIN + 1`
-done
-
-MAJ=44
-MIN=0
-rm -f $DEV/cui*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 666 $DEV/cui$MIN c $MAJ $MIN
-	MIN=`expr $MIN + 1`
-done
-
-if grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/ttyI* $DEV/cui*
-fi
-
-MAJ=68
-MIN=0
-rm -f $DEV/capi20*
-mknod -m 666 $DEV/capi20 c $MAJ 0
-mknod -m 666 $DEV/capi20.00 c $MAJ 1
-mknod -m 666 $DEV/capi20.01 c $MAJ 2
-mknod -m 666 $DEV/capi20.02 c $MAJ 3
-mknod -m 666 $DEV/capi20.03 c $MAJ 4
-mknod -m 666 $DEV/capi20.04 c $MAJ 5
-mknod -m 666 $DEV/capi20.05 c $MAJ 6
-mknod -m 666 $DEV/capi20.06 c $MAJ 7
-mknod -m 666 $DEV/capi20.07 c $MAJ 8
-mknod -m 666 $DEV/capi20.08 c $MAJ 9
-mknod -m 666 $DEV/capi20.09 c $MAJ 10
-mknod -m 666 $DEV/capi20.10 c $MAJ 11
-mknod -m 666 $DEV/capi20.11 c $MAJ 12
-mknod -m 666 $DEV/capi20.12 c $MAJ 13
-mknod -m 666 $DEV/capi20.13 c $MAJ 14
-mknod -m 666 $DEV/capi20.14 c $MAJ 15
-mknod -m 666 $DEV/capi20.15 c $MAJ 16
-mknod -m 666 $DEV/capi20.16 c $MAJ 17
-mknod -m 666 $DEV/capi20.17 c $MAJ 18
-mknod -m 666 $DEV/capi20.18 c $MAJ 19
-mknod -m 666 $DEV/capi20.19 c $MAJ 20
-
-if grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/capi20 $DEV/capi20.??
-fi
-rm -f $DEV/isdnctrl
-ln -s $DEV/isdnctrl1 $DEV/isdnctrl
-
-echo "done."
diff --git a/perl-install/share/po/Changelog b/perl-install/share/po/Changelog
deleted file mode 100644
index fcb677e9a..000000000
--- a/perl-install/share/po/Changelog
+++ /dev/null
@@ -1,249 +0,0 @@
-2002-05-14  Arkadiusz Lipiec <alipiec@elka.pw.edu.pl>
-	* pl.po: finished translation and corrected many entries
-
-2001-03-14  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* i18n_compssUsers: improved the script to not include path=
-	lines
-
-2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fr.po: fixed bug #518 and fixed other misc errors
-
-2000-09-16  Pixel  <pixel@mandrakesoft.com>
-	* de.po: fix translation of "Size: %d KB\n" (was MB instead of KB)	
-
-2000-04-28  Stefan Siegel <siegel@linux-mandrake.com>
-	* de.po: Update German File
-
-2000-04-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	
-	* cy.po: There is now a Welsh file, Thanks Dafydd !
-	* da.po: Updated Danish file
-
-2000-04-04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lv.po: Added Latvian file; now we are the very first to have
-	Latvian language :)
-
-2000-03-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* sk.po: Slovakian translation is now mantained and updated
-
-2000-01-10  Pixel  <pixel@mandrakesoft.com>
-
-	* po/Changelog: remove the paragraph which was removed from
-	help.pm in br.po cs.po el.po et.po gl.po ro.po ru.po tr.po
-
-2000-01-06 François PONS <fpons@mandrakesoft.com>
-	* it.po: updated by Maurizio.
-
-2000-01-06 David BAUDENS <baudens@mandrakesoft.com>
-	* fr.po: updated
-
-2000-01-05  Pixel  <pixel@mandrakesoft.com>
-	* *.po: changed the crypto message (french address in usa, and
-	removed a paragraph)
-
-2000-01-03  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: merged some strigns from gnorpm to help transaltiosn fo
-	rpmdrake new strings
-
-2000-01-03  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated Norwegian file
-	* id.po: updated Indonesian file
-	* hr.po: updated Croatian file
-	* da.po: updated Danish file
-	* et.po: updated Estonian file
-
-2000-01-01  Pablo Saratxaga <pablo@mandrakesoft.com>
-	Happy New Year to all !
-	* es.po: completed Spanish file
-	* zh_CN.po: created a GB2312 version by converting the Big5 one
-	however a real mantainer for a GB2312 version is still wanted
-	* ca.po: the first one to be updated after Y2K :)
-
-1999-12-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* zh_TW.Big5.po: uddated chinese file
-	* it.po: updated the Italian file
-	* es.po: completed spanish file
-	* br.po: updated Britton file
-	* ja.po: updated Japanese file
-
-1999-12-29  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: completed Norwegian file
-	* eo.po: Completed esperanto file
-	* sv.po: updated Swedish file
-	* hu.po: compelted Hungarian file
-
-1999-12-27  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ru.po: updated Russian file
-	* id.po: completed Indonesian file
-	* et.po: Estonian files fixes
-	* no.po: completed file
-	* et.po: completed file
-	* lt.po: updated Lithuanian file
-	* da.po: completed Danish file
-	* ja.po: updated Japanese file
-
-1999-12-24  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* lt.po: updated Lithuanian file
-	* *.po: new strings have been added...
-
-1999-12-23  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* eo.po: completed esperanto file
-	* hr.po: updated Croatian file
-	* zh_TW.Big5: updated chinese file
-	* id.po: completed Indonesian file
-	* et.po: completed Estonian file
-	* sv.po: updated swedish file
-	* da.po: completed Danish file
-	* bg.po: updated Bulgarian file
-	* sr.po: updated serbian file
-	* no.po: completed norwegian file
-
-1999-12-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* de.po: update from Stefan Siegel <siegel@informatik.uni-kl.de>
-	* bg.po: updated Bulgarian file
-
-1999-12-16  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: updated po files
-	* ja.po: added japanese file
-
-1999-12-12  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* pt_BR.po: added portuguese file from Andrei <andreib@zaz.com.br>
-
-1999-12-10  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* et.po: completed 100% the Estonian file
-
-1999-12-09  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* th.po: Thai file from Kan Yuenyong <kan@kaiwal.com>
-
-1999-12-07  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ro.po: did 'ispell -d romanian ro.po', I hope that improves the
-	lack of 8 bit letters; but a real mantainer is needed.
-
-1999-12-02  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po, ca.po, no.po, id.po: Completed Spanish, Catalan,
-	Norwegian and Indonesian language files.
-	* hu.po: Update of Hungarian file (60% done)
-
-1999-11-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* hu.po: added Hungarian language file
-
-1999-11-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated Norwegian file
-	* ca.po: added beginnign of Catalan file from SoftCatalà
-
-1999-11-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: corrected a typo ( s/Size: %d/Size: %s/ )
-	* de.po: updated German file
-	* id.po: updated Indonesian file
-
-1999-11-24  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* bg.po: added Bulgarian file from Elena Radåva <ely@triada.bg>
-
-1999-11-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* uk.po: added Ukrainian file
-	* pl.po: Polish is now 100% complete!
-
-1999-11-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* et.po: added estonian from Riho Kurg <riho@aso.ee>
-	* pl.po: updated polish from Pawel Jablonski
-
-1999-11-16  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* update-po, lots of new strings :)
-	* es.po: updated & completed
-
-1999-11-10  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: completed
-	* pl.po: updated from Pavel Jablonski
-
-1999-11-08  François PONS <fpons@mandrakesoft.com>
-	* fr.po: updated.
-
-1999-11-05  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* pl.po: added Polish language file
-	* ru.po: updated russian file
-	* no.po: completed norwegian file
-
-1999-11-04  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated and completed spanish language file
-	* wa.po: updated walon language file
-
-1999-10-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated spanish language file
-
-1999-10-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po, es.po: uopdated spanish and italian language files
-
-1999-10-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: update of the Nowegian translation by Terje Bjerkelia
-
-1999-10-22  Pixel  <pixel@linux-mandrake.com>
-	* es.po: some corrections by Camille <camille@mandrakesoft.com>
-
-1999-10-21  François PONS <fpons@mandrakesoft.com>
-	* fr.po: modified printer or queue translation (line 1950 and 2778)
-
-1999-10-21  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated Spanish language file
-
-1999-10-20  François PONS <fpons@mandrakesoft.com>
-	* fr.po: corrected "Skip PCMCIA probing" message with new msgid
-
-1999-10-14  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* ru.po: new Russian translations from Aleksey Smirnov
-	* no.po: update of the Nowegian translation by Terje Bjerkelia
-
-1999-10-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* *.po: checked that the name is correctly DrakX now, and updated them
-	* tr.po: newer translations from Hakan Terzioðlu <hakan@gelecek.com.tr>
-
-1999-10-11  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po,es.po: updated Norwegian and Spanish language files
-
-1999-09-30  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* es.po: updated Spanish language file
-
-1999-09-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: updated norwegian file
-
-1999-09-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po: updated italian file
-
-1999-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: update Norwegian language file
-
-1999-09-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* tr.po: Added Turkish language file from
-	Hakan Terzioðlu <hakan@gelecek.com.tr>
-	* it.po: updated italian file
-
-1999-09-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* it.po: added italian language file from
-	"Paolo Lorenzin" <pasusu@tin.it>
-
-1999-09-08  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* id.po, es.po: completed files
-
-1999-08-26  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* fr.po: updated fr.po from gregus@linux-mandrake.com (Grégoire Colbert)
-	who is now in charge of the French translation
-
-1999-08-25  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* Makefile: corrected the msgmerge update (translations were
-	being deleted !). make it so DrakX.pot has a header
-	* *.po: get back all *.po files to the latest version including
-	translated strings. add headers
-	* id.po: update from indonesian team
-
-1999-08-22  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* no.po: added norwegian translations from
-	Terje Bjerkelia <terje@bjerkelia.com>
-
-1999-08-18  Pablo Saratxaga <pablo@mandrakesoft.com>
-	* Changelog: created a Changelog file
-	* id.po: added indonesian translations from
-          Mohammad DAMT <mdamt@cakraweb.com>
-
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
deleted file mode 100644
index e1495dcf3..000000000
--- a/perl-install/share/po/DrakX.pot
+++ /dev/null
@@ -1,10173 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "Choose a X driver"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "X driver"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Which configuration of XFree do you want to have?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:651
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1585
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr ""
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr ""
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr ""
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr ""
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr ""
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr ""
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr ""
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr ""
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr ""
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr ""
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr ""
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr ""
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr ""
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr ""
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr ""
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr ""
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr ""
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr ""
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr ""
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr ""
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr ""
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr ""
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr ""
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr ""
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr ""
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr ""
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr ""
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr ""
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr ""
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr ""
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr ""
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr ""
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr ""
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr ""
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr ""
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr ""
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr ""
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr ""
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr ""
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr ""
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr ""
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr ""
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr ""
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr ""
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr ""
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr ""
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr ""
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr ""
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr ""
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr ""
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr ""
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr ""
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr ""
-
-#: ../../any.pm_.c:1041
-msgid "Higher"
-msgstr ""
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr ""
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1051
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1054
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr ""
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr ""
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr ""
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootloader.pm_.c:1047
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr ""
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr ""
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr ""
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr ""
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr ""
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr ""
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr ""
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr ""
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr ""
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr ""
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr ""
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr ""
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr ""
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:617
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:785
-msgid "Give a file name"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:914
-msgid "What type of partitioning?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Hide files"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Move files to the new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-msgid "Moving files to the new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, c-format
-msgid "Removing %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, c-format
-msgid "Options: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1143
-msgid "The encryption keys do not match"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr ""
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a medium"
-msgstr ""
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr ""
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr ""
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr ""
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:794
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for Windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-msgid "Refuse"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:548
-msgid "Insert a floppy containing package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:641
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:642
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:818
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:883
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:898
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:944
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1004
-msgid "Do you have an ISA sound card?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1098
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1143
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1231
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Replay"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1336
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr ""
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button?"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:222
-msgid "Bulgarian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-msgid "Latvian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:271
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "Tamil"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "Tajik keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:292
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:308
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr ""
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr ""
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-msgid "Choose the network interface"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-msgid "Network Configuration Wizard"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr ""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:171
-msgid "Choose the profile to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-msgid "ISDN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-msgid "ADSL connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "cable connection detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "LAN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:206
-msgid "Choose the connection you want to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:231
-msgid "Internet connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:237
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:251
-msgid "Network configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:256
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network/network.pm_.c:309
-#, c-format
-msgid " (driver %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr ""
-
-#: ../../network/network.pm_.c:314
-msgid "Start at boot"
-msgstr ""
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr ""
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr ""
-
-#: ../../network/network.pm_.c:385
-msgid "Proxies configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:41
-msgid "Internet configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:42
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:56
-msgid "The system is now connected to Internet."
-msgstr ""
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:58
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:82
-msgid "Connection Configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:95
-msgid "Choose your country"
-msgstr ""
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr ""
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr ""
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr ""
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr ""
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr ""
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr ""
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr ""
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ""
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr ""
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-msgid "CUPS configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-msgid "Specify CUPS server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-msgid "Port"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-msgid "Add a new printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:484
-msgid "Installing HPOJ package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:507
-msgid "Installing SANE package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:627
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:628
-msgid "Remote host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:629
-msgid "Remote printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:632
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:636
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:705
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:804
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-msgid "TCP/Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:860
-msgid "Printer host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1008
-msgid "Description"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1009
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1114
-msgid "Your printer model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-msgid "The model is correct"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-msgid "Select model manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1141
-msgid "Printer model selection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1142
-msgid "Which printer model do you have?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1222
-msgid "OKI winprinter configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-msgid "Lexmark inkjet configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1510
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1567
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1585
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1589
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Print"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1592
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1600
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1604
-msgid "Do not print any test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1637
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1641
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-msgid "Raw printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-msgid "Close"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1746
-msgid "Print option list"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-msgid "Transfer printer configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1867
-msgid "New printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1899
-msgid "Starting network..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-msgid "Configure the network now"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1934
-msgid "Network functionality not configured"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1938
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1982
-msgid "Restarting printing system..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2020
-msgid "high"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2020
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2208
-msgid "Select Printer Spooler"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2209
-msgid "Which printing system (spooler) do you want to use?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2242
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2255
-msgid "Installing Foomatic..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-msgid "Configuring applications..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2358
-msgid "Would you like to configure printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2418
-msgid "Printerdrake"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2422
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2423
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2467
-msgid "Change the printing system"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-msgid "Do you want to configure another printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2714
-msgid "Modify printer configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2716
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-msgid "Printer connection type"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-msgid "Print test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-msgid "Know how to use this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-msgid "Remove printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2789
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2813
-msgid "Default printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2839
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2841
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr ""
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr ""
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr ""
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr ""
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr ""
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr ""
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr ""
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr ""
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr ""
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-msgid "System"
-msgstr ""
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr ""
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr ""
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:604
-msgid "Backup User files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:655
-msgid "Backup Other files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:676
-msgid " Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-msgid "File Selection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:782
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:801
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-msgid "Remove Selected"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:889
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:928
-msgid "Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:957
-msgid "Please enter the host name or IP."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter your login"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:972
-msgid "Please enter your password"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:978
-msgid "Remember this password"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-msgid "FTP Connection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-msgid "Secure Connection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-msgid "Please choose your CD space"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-msgid "Please check if you are using CDRW media"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1096
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1143
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-msgid "Please enter the directory to save:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-msgid "Use quota for backup files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1257
-msgid "Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1302
-msgid "Use daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1307
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1313
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1317
-msgid "Use Hard Drive with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1319
-msgid "Use FTP with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1406
-msgid "Where"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "When"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "More Options"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-msgid "Drakbackup Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1453
-msgid "Please choose where you want to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1530
-msgid "Please choose what you want to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1531
-msgid "Backup system"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1745
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1776
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1876
-msgid "         Restore Configuration       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1962
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1964
-msgid "please choose the date to restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1992
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2073
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2133
-msgid "Select another media to restore from"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2135
-msgid "Other Media"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2141
-msgid "Restore system"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2142
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2215
-msgid "Custom Restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2307
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-msgid "Restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2512
-msgid "Package List to Install"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2563
-msgid "Please select data to restore..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2584
-msgid "Please select media for backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2606
-msgid "Please select data to backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2729
-msgid "Backup system files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2731
-msgid "Backup user files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2733
-msgid "Backup other files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2761
-msgid "Sending files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2889
-msgid "Please enter the cd writer speed"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2913
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2979
-msgid "Backup Now from configuration file"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "View Backup Configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3010
-msgid "Wizard Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3014
-msgid "Advanced Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3018
-msgid "Backup Now"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:68
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Module name"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Size"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-msgid "drakfloppy"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:91
-msgid "boot disk creation"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:126
-msgid "kernel version"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:132
-msgid "General"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:137
-msgid "Expert Area"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:141
-msgid "Add a module"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:161
-msgid "force"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:200
-msgid "Remove a module"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:427
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:254
-msgid "no fonts found"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-msgid "done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:351
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:354
-msgid "True Type fonts installation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:470
-msgid "xfs restart"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:551
-msgid "Fonts Importation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:571
-msgid "Advanced Options"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:573
-msgid "Font List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:740
-msgid "Choose the applications that will support the fonts :"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:748
-msgid "StarOffice"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:752
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:756
-msgid "Generic Printers"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:829
-msgid "Install List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Selected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:898
-msgid "Remove List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:916
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:918
-msgid "Post Install"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:936
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:937
-msgid "Post Uninstall"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:142
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:150
-msgid "Internet connection sharing is now disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:176
-msgid "Internet connection sharing is now enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid "Interface %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:267
-msgid "Network interface already configured"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:273
-msgid "Automatic reconfiguration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:274
-msgid "Show current interface configuration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:294
-msgid "(This) DHCP Server IP"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:321
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:329
-msgid "Configuring..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:366
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:568
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:573
-msgid "Internet connection sharing configuration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:580
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr ""
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr ""
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/draksec_.c:57
-msgid "Setting security user"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Canada (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "China (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "France [SECAM]"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "Ireland"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Australia"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:76
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:131
-msgid "There was an error while scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:407
-msgid "Mail/SMS alert configuration"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:408
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:416
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:421
-msgid "xinetd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:424
-msgid "service setting"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:435
-msgid "load setting"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:449
-msgid "alert configuration"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:493
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr ""
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr ""
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr ""
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr ""
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr ""
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr ""
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr ""
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr ""
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr ""
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr ""
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr ""
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr ""
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr ""
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr ""
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr ""
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "A graphical environment with user-friendly set of applications and desktop tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr ""
diff --git a/perl-install/share/po/Makefile b/perl-install/share/po/Makefile
deleted file mode 100644
index c387c8f35..000000000
--- a/perl-install/share/po/Makefile
+++ /dev/null
@@ -1,71 +0,0 @@
-include ../../Makefile.config
-
-PMSFILES = $(wildcard $(ALLPMS:%=../../%))
-PMSCFILES = $(PMSFILES:%=%_.c)
-
-# temporarly don't include ar.po,br.po,cy.po,ga.po,is.po,ro.po,sl.po
-# (too low translation percentage)
-POFILES = $(shell ls *.po|grep -v '\(ar.po\|ga.po\|is.po\|ro.po\|sl.po\)')
-
-MOFILES = $(POFILES:%.po=%.mo)
-LANGS = $(POFILES:%.po=%)
-
-LOCALEDIR=$(DATADIR)/locale
-
-
-all: help $(MOFILES)
-
-help:
-	@if [ ! -d doc ]; then \
-		echo "Checking out doc stuff now ..."; \
-		cvs co doc/manual/{entities,literal/drakx}; \
-		rm -rf doc/CVS; \
-	else \
-		echo "Updating doc stuff now ..."; \
-		cvs update doc/manual/{entities,literal/drakx}; \
-	fi
-	./help_xml2pm.pl
-
-%.mo: %.po
-	msgfmt -o $@ $<
-
-$(PMSCFILES): %_.c: %
-	./fake_c.pl $< > $@
-
-$(POFILES): DrakX.pot
-	perl -ne 'print unless /^# DO NOT BOTHER TO MODIFY HERE, SEE:|^#.*\Qdrakx-help.xml/ .. /^$$/' $@ > $@t
-	if [ -e help-$@t ]; then perl -pe 's|^#~ ||' -i $@t ; msgmerge -C $@t help-$@t $< > $@; else msgmerge $@t $< > $@; fi
-	rm $@t
-
-DrakX.pot: $(PMSFILES)
-	$(MAKE) $(PMSCFILES);
-	xgettext -F -n --add-comments='-PO' --keyword=_ --keyword=__ -o $@ $(PMSCFILES)
-	rm $(PMSCFILES)
-	perl i18n_compssUsers 2>/dev/null >> $@
-
-install:
-	for l in $(LANGS); do \
-		install -d $(LOCALEDIR)/$$l/LC_MESSAGES; \
-		install -m 644 $$l.mo $(LOCALEDIR)/$$l/LC_MESSAGES/$(NAME).mo; \
-	done
-
-clean:
-	@rm -rf drakx-help.xml .memdump help-*.po{t,} doc empty.po tmp.* messages tmp.pot *.mo $(POFILES:%=%t) $(PMSCFILES)
-
-check:
-	@grep -F '$$' DrakX.pot && { echo "bad translation strings (contains \$$) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^"; exit 1; } ||:
-
-verif:
-	perl -ne '/^\s*#/ or $$i += my @l = /\b__?\(/g; END { print "$$i\n" }' $(PMSFILES)
-	perl -ne '$$i += my @l = /\.c:/g; END { print "$$i\n" }' DrakX.pot
-
-verif2: 
-#	perl -I ../.. -Mcommon -e 'foreach (qw($(PMSFILES))) { printf "package foo%d;\n", ++$$i; print common::cat_($$_) }' | perl -ne 'print if !/use (diagnostics|vars|strict)/' | OUTFILE=tmp.pm perl -I. -I../.. -Mb_dump_strings >/dev/null 2>/dev/null
-	perl -pe 's|$$|\\n\\|' tmp.pm > tmp.pm_.c
-	xgettext --keyword=_ -o tmp.po tmp.pm_.c 
-	msgmerge DrakX.pot tmp.po > tmp.pot
-	grep "^msgid" tmp.pot | sort > tmp.pot.light
-	grep "^msgid" DrakX.pot | sort | diff - tmp.pot.light | grep "^>" || true
-
-
-#	for i in *.po; do echo -n "$i "; msgfmt -v $i 2>&1; done | perl -e 'print map { $_->[0] } sort { $a->[1] <=> $b->[1] } map { [ $_, (split)[1] ] } <>'
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
deleted file mode 100644
index 60896970c..000000000
--- a/perl-install/share/po/af.po
+++ /dev/null
@@ -1,12923 +0,0 @@
-# KTranslator Generated File
-# Copyright (c) 1999-2000 MandrakeSoft
-# Schalk. W. Cronjé <schalkc@ntaba.co.za>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-09-09 22:06-0000\n"
-"Last-Translator: Schalk W. Cronjé <schalkc@uk.ntaba.com>\n"
-"Language-Team: Afrikaans <mandrake@af.org.za>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigureer skyfkoppe afsonderlik"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-ekstensies"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigureer net die \"%s\" kaart (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multikopkonfigurasie"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"U stelsel onderstuen multikopkonfigurasie.\n"
-"Wat wil u doen?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Videokaart"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Selekteer 'n videokaart"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Kies 'n X-bediener"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-bediener"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Kies 'n X-bediener"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X-bediener"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Watter tipe XFree-konfigurasie verlang u?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
-"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D-hardwareversnelling"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
-"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasievertoondrywer)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree-konfigurasie"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Kies die geheue grootte van u videokaart"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Selekteer opsies vir bediener"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Kies 'n monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
-"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
-"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
-"belangrikste.\n"
-"\n"
-"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite dié van u\n"
-"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
-"kies konservatief."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horisontale verfristempo"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikale verfristempo"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafikakaart is nog nie konfigureer nie"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolusie is nog nie gekies nie"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Wil u die konfigurasie toets?"
-
-#
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Toets konfigurasie"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probeer van die parameters verander"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Daar was 'n fout:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "uitgang binne %ds"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Is dit korrek?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hier is fout, probeer van die parameters verander"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolusie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Kies die resolusie en kleurdiepte"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Videokaart: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 bediener: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Nog"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Kundige modus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Vertoon almal"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolusies"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sleutelbord uitleg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistipe: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muistoestel: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HoriSink: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertVerfris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Video geheue: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 bediener: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drywer: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window konfigurasie word opgestel"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Wat wil u doen?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Verander monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Verander videokaart"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Verander bedienerinstellings"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Verander resolusie"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Vertoon inligting"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Toets weer"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Verlaat"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behou die veranderinge?\n"
-"Huidige konfigurasie is:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X met herlaai"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
-"Wil u X begin met 'n herlaai?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kleure (8 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32-duisend kleure (15 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65-duisend kleure (16 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16-miljoen kleure (24 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljoen kleure (32 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64MB of meer"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standaard VGA,  640x480 teen 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 teen 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-aanpasbaar, 1024x768 teen 87Hz interverweef (nie 800x600 nie)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 102x768 teen 87 Hz interverweef, 800x600 teen 56 Hz "
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Verlengde Super VGA, 800x600 teen 60 Hz, 640x480 teen 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Nie-interverweefde SVGA, 1024x768 teen 60 Hz, 800x600 teen 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hod frekwensie SVGA, 1024x768 teen 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 74Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 76Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor wat 1600x1220 kan doen teen 70Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor wat 1600x1220 kan doen teen 76Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Eerste sektor van herlaaipartisie"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sektor van skyf (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO installasie"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installasie"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO met tekskieskaart"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO met grafiese kieskaart"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Laai vauit DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Herlaaistelsel hoofopsies"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Herlaaistelsel om te gebruik"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Herlaaiprogram installasie"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Herlaaitoestel"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (werk nie op 'n ou BIOS'e nie)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompak"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompak"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Videomodus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Wagperiode voro verstekstelsel gelaai word"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Wagwoord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Wagwoord (weer)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Beperk instruksielynopsies"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "beperk"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Maak /tmp skoon met elke herlaai"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Gebruik multiprofiele"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Gee die geheuegrootte in MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Probeer asb. weer"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Beginboodskap"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tydsbeperking vir stelselkernlaai"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Laat CD-herlaai toe?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Laat OF-herlaai toe?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Verstek bedryfstelsel?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier is die huidige inskrywings\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Voeg by"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Klaar"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Verander"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ander bedryfstelsel (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ander bedryfstelsel (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ander bedryfstelsel (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Beeld"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Basis"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Aanlas"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lees-skryf"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Onveilig"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Verstek"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Geen video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Verwyder inskrywing"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Leë etiket word nie toegelaat nie"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Hierdie etiket is alreeds in gebruik"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Het %s %s koppelvlakke gevind"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Beskik u oor nog?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Het u enige %s koppelvlakke?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nee"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Sien hardeware inligting"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Watter %s drywer meot ek probeer?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
-"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
-"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
-"ophang, maar dit sal nie skade veroorsaak nie."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Aftas"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spesifieer opsies"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"U kan noue die opsies voorsien vir module %s.\n"
-"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bv. ``io=0x300 irq-7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Module opsies:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laai van module %s het gefaal.\n"
-"Wil u ander parameters probeer?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s alreeds bygevoeg)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Die wagwoorde is te eenvoudig"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Gee asb. 'n gebruikerskode"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Hierdie genruikerskode bestaan alreeds"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Voeg gebruiker by"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Tik 'n gebruiker in\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aanvaar gebruiker"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Regte naam"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Gebruikerskode"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Dop"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Outointeken"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
-"Verlang u hierdie funksionaliteit?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Kies die verstek gebruiker:"
-
-#
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Kies die vensterbestuurder om te loop:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alles"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Voeg 'n gebruiker by"
-
-#
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Aangepaste"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS word gelaai"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Kanselleer"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Krakers welkom"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Swak"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standaard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hoog"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Hoog"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoïes"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
-"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
-"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
-"wagwoord\n"
-"toegang nie."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
-"aanbeveel nie."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
-"wat aan die internet as 'n kliënt konnekteer. Daar is heelwat "
-"sekuriteitstoetse."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
-"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kliënte\n"
-"af kan aanvaar."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
-"Sekuriteitseienskappe is maksimaal."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Gebruik sekuriteitsvlak"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Selekteer opsies vir bediener"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welkom by %s die bedryfstelselkeuseprogram!\n"
-"\n"
-"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
-"%d sekonde vir die verstekopsie.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
-"word."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nie genoeg spasie in /boot nie"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Werkskerm"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Beginkieskaart"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Gee hulp beskikbaar nie (nog nie).\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Herlaaistylkonfigurasie"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Lêer"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Lêer/_Verlaat"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<ctrl>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nuwe monitorkategoriasiestyl"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nuwe styl monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradisionele monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradisionele Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Laai Aurora met herlaaityd"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB metode"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot metode"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"U gebruik huidig %s as herlaaibestuurder.\n"
-"Kliek op Konfigureer om opstelassistent te laai."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigureer"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Stelselmode"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Laai X-Windowstelsel met herlaai"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nee, ek verlang outo-aanteken"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan nie /etc/inittab oopmaak vir lees nie: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minute"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondes"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankryk"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgies"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Duitsland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grieks"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norweegs"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sien"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiaans"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seriaal"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Rugsteun u data eers asb."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lees noukeurig!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-"van die skyf. (2048 sektors is genoeg)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fout"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Kies aksie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"U het een massiewe FAT partisie. \n"
-"(gewoonlik deur DOS/Windows gebruik)\n"
-"Ek stel voor u verstel eers die grootte van dié partisie\n"
-"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detail"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "Gejoernaliseer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Ruilarea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ander"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "LOersteltipes:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Skep"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' instede."
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Uitwis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik ``Ontheg'' eerste"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
-"partisietipe"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Kies 'n partisie"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Kies 'n ander partisie"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Verlaat"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Skakel oor na kundige gebruiksvlak"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Skakel oor na normale gebruiksvlak"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Herroep"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Wil u in elk geval voortgaan?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Verlaat, maar moenie iets stoor nie"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wil u die /etc/fstab veranderinge stoor?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Outo-allokeer"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Verwydeer almal"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Hardeskyfinligting"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle primêre partisies is gebruik"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
-"skep"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skryf partisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Verwyderbare media"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selekteer lOer"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
-"Wil u voortgaan?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Waarskuwing"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sit 'n floppie in die aandrywer.\n"
-"Alle data op hierdie floppie sal verloor word."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Partisietabel Reddingspoging"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Gedetaileerde inligting"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Hegpunt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opsies"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Verstel Grootte"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Skuif"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatteer"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Heg"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Voeg by RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Voeg by LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ontheg"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Verwyder uit RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Verwyder uit LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Verander RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Gebruik vir teruglus"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Kies 'n nuwe grootte"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Kies sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Hegpunt:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Voorkeure: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Terugluslêer %s word geformateer"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Verander partisietipe"
-
-#
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Watter lêerstelsel verlang u?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Oorskakeling van ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Waar wil u terugluslêer %s heg?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waar wil u toestel %s heg?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
-"gebruik word. Verwyder eers die teruglus."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT lêerstelselgrense word bereken"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Grootteverandering"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Hierdie partisie se greootte kan nie verstel word nie"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data om hierdie partisie moet gerugsteun word."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Kies die nuwe grootte"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nuwe grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na watter skyf wil u skuif?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na watter sektor wil u skuif?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Verskuiwing"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partisie word verskuif..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Kies 'n bestaande RAID om by toe te voeg"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nuut"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Kies 'n bestaande LVM om by toe te voeg"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM naam?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Teruglus"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Teruglus lêernaam:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Regte naam"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Lêer word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Lêer bestaan alreeds. Moet dit gebruik word?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Hegopsies:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Verskeie"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "toestel"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "vlak"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "blokgrootte"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Watter tipe van partisionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jammer, ek kan nie die versoek om /boot om hierdie skyf (op 'n silinder > "
-"1024) te skep,\n"
-"aanvaar nie. As u LILO gebruik sal dit nie werk nie en as u nie LILO "
-"gebruik\n"
-"nie, dan het u nie /boot nodig nie."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"_ keuse vir die \"root\" partisie (/) is fisies buite die 1024de silindervan "
-"die\n"
-"hardeskyf en u het nie 'n /boot partisie nie. Indien u beplan om LILO te "
-"gebruik,moet u\n"
-"asb. 'n /boot partisie skep,"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisietabel van skyf %s gaan opdateer word!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met formatering."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatering"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Terugluslêer %s word geformateer"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid het gefaal"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "LPD word verwyder..."
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Toestel:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipe:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Naam: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Begin: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d na silinder %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Geformateer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nie geformatter\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Geheg\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Teruglus lêer(s): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Verstekpartisie vir herlaai\n"
-"  (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Vlak %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blokgrootte %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-skywe %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Teruglus lêernaam: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Dis hoogs waarskynlik dat hierdie partisie\n"
-"drywerpartisie is en verkieslik alleen gelos\n"
-"moet word.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Hierdie spesiale herlaaipartisie\n"
-"is om u stelsel te duolaai.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info:"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-skywe %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisietabeltipe: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opsies: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Verander tipe"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS bediener"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering ban %s het gefaal"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck het gefaal met kode %d of sein %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout met onthegting van %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "bediener"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Hegpunte moet met 'n / begin"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Hierdie lêergids moet altyd in die wortellêerstelsel bly"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "U benodig 'n ware lêerstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Four om %s in skryfmode te open: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"'n Fout het voorgekom - geen geldige toestelle om die nuwe lêerstelsels op "
-"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "U get geen partisies nie!"
-
-#: ../../help.pm_.c:13
-#, fuzzy
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is 'n multigebruikerstelsel en dit beteken dat elke gebruiker sy "
-"eie\n"
-"voorkeure kan stel, met sy eie lêers ens. U kan meer hieroor in die "
-"gebruikersgids\n"
-"lees. Maak andersins as 'root', die supergebruiker, kan gebruikers wat u "
-"hier byvoeg\n"
-"niks verander behalwe hul eie lêers en konfigurasie nie. U moet ten minste "
-"een gewone\n"
-"gebruiker vir u self skep. Hierdie gebruker is die een waaronder u moet "
-"inteken vir\n"
-"normale gebruik van die stelsel. Alhoewel dit baie gemaklik is om as 'root' "
-"in te teken vir\n"
-"daaglikse werk, is dit baie gevaarlik. 'n Eenvoudige fout kan u stelsel "
-"immobiliseer. 'n Fout\n"
-"wat as gewone gebruiker gemaak word sal net daardie gebruiker beïnvloed\n"
-"en nie hele stelsel nie.\n"
-"\n"
-"\n"
-"Eers moet u u eie naam intik. Dit is nie verpligtend nie, want u kan eintlik "
-"enigiets intik as\n"
-"u wil. DrakX sal dan die eerste woord wat u ingetik het in die "
-"gebruikerskode inskrywingsveld\n"
-"plaas. U kan hier verander indien u wil. Dit is die gebruikerskode waarmee "
-"die gebruiker in die\n"
-"stelsel sal inteken. U moet dan ook 'n wagwoord hier invoeg. 'n Gewone "
-"gebruiker se wagwoord\n"
-"is nie so krities as dié van die supergebruiker (uit 'n sekuriteitsoogpunt) "
-"nie, maar daar is geen\n"
-"rede om agterlosig met u data te wees nie.\n"
-"\n"
-"\n"
-"Indien u op Aanvaar kliek sal die gebruiker geskep word en kan u nog "
-"gebruikers byvoeg.\n"
-"U kan vir al u vriende gebruikerskodes skep of sommer een vir pa en ma ook. "
-"Wanneer u\n"
-"klaar is kliek op Klaar.\n"
-"\n"
-"Kliek op die Gevorderd knoppie indien u die verstek instruksiedop vir die "
-"gebruiker wil verander.\n"
-"Dit is bash by verstek."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-"wat die rol van die diens verduidelik.\n"
-"\n"
-"Wees versigtig met hierdie stap. Indien u beplan om dié rekenaar as 'n\n"
-"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-#, fuzzy
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
-"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
-"installasie stop sit. Om met die installasie voort te gaan kliek op die "
-"Aanvaar\n"
-"knoppie."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr "Kies asb. "
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
-"ttyS0 onder GNU/Linux is."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
-"enige ander\n"
-"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
-"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
-"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-"\n"
-"\n"
-"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-"nodige\n"
-"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
-"betrokke bedryfstelsels te laai."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"U moet aandui waar u die informasie om Linux te herlaai, wil plaas.\n"
-"\n"
-"\n"
-"Behalwe as u werklik weet wat u doen moet u \"Eerste sektor van skyf (MBR)\" "
-"kies."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
-"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
-"dit outomaties installeer word.\n"
-"\n"
-"Indien u nie oor 'n SCSI-kaart, beskik nie of  oor  'n ISA SCSI-kaart of 'n "
-"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
-"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
-"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
-"\n"
-"\n"
-"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
-"spesifiekeopsies.\n"
-"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
-"gewoonlik die beste.\n"
-"\n"
-"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
-"Windows-bedryfstelsel te bekom.\n"
-"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Hierdie floppie is nie in FAT-formaat nie"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
-"\"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fout met die les van lêer %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
-" U kan inligting hieroorvind by %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"U moet 'n wortelpartisie definieer.\n"
-"Skep 'n partisie of kliek op 'n bestaande een.\n"
-"Kies dan Hegpunt en stel dit dan '/'."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"U het nie 'n ruilpartisie nie\n"
-"\n"
-"Wil u steeds voortgaan?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Gebruik beskikbare spasie"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Gebruik bestaande partisies"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Daar is geen bestaande partisies om te gebruik nie"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik vir die Windows-partisie vir teruglus"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Watter partisie wil u vir Linux4Win gebruik?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Kies die groottes"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Basispartisiegrootte in MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ruilpartisiegrootte in MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Watter partisie se grootte wil u verander?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Windowslêerstelselgrense word bereken"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
-"Fout: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WAARSKUWING\n"
-"\n"
-"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
-"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
-"installasie\n"
-"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
-"na\n"
-"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
-"OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Watter grootte wil u vir Windows behou?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partisie %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-grootteverandering het gefaal: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Wis hele skyf"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Verwyder Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Gespesialiseerde skyfpartisionering"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"U het nou partisie %s partisioneer.\n"
-"Wanneer u klaar is, stoor u veranderinge met 'w'."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Die Windowspartisie beskik nie oor die nodige spasie nie."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ek kon geen plek vir installasie vind nie."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisionering het misluk: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Netwerk op pad op"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Netwerk op pad af"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
-"nie. Gaan op u eie risiko voort."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikaat hegpunt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sekere belangrike pakkette het nie korrek geïnstalleer nie.\n"
-"Óf die CDROM-aandrywer óf die CD is foutief.\n"
-"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom by %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gaan stap '%s' binne\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
-"die installering\n"
-"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
-"Daarvoor moet u\n"
-"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
-"instruksielyn intik."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installasieklas"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Kies asb. een van die volgende installasieklasse:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Die totale grootte vir die gekose groepe is naastenby %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Indien u verkies om minder as hierdie grootte te installeer, kies dan 'n\n"
-"persentasie van pakkette wat u wil installeer.\n"
-"\n"
-"'n Lae persentasie sal net die belangrikste pakkette installeer;\n"
-"'n persentasie van 100%% sal alles gekose pakkette installeer."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"U het net spasie op u hardeskyf vir %d%% van hierdie pakkette.\n"
-"\n"
-"Indien u minder wil installeer, kies die persentasie wat u verlang.\n"
-"'n Lae persentasie sal net die belangrikste pakkette installeer;\n"
-"'n Persentasie van %d%% sal soveel moontlik probeer installeer."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "U sal met meer akkuraatheid in die volgende stap kan kies."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Persentasie pakkette om te installeer"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Kies pakketgroepe"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuele pakketseleksie"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Foutiewe pakket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Weergawe: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Groote: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrikheid: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
-"beskikbaar is nie"
-
-#
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Die volgende pakkette gaan installeer word"
-
-#
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Dei volgende pakkette gaan verwyder word"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geïnstalleer"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Wys outogeselekteerde pakkette."
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installasie"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Laai/Stoor op floppie"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Pakketseleksie word opgedateer"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimale installasie"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Besig met installasie"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Skatting"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tyd oor "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Wag asb. installasie word voorberei"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakkette"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installeer pakket %s"
-
-#
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aanvaar "
-
-#
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Weier"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verander u CDROM!\n"
-"\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
-"nie\n"
-"hieroor beskik nie, druk Kanselleer om installasies vanaf dié CDROM te vermy."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Gaan steeds voort?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Daar was 'n fout met pakkette:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "'n Fout het voorgekom"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Wil u die werklik die drukker verwyder?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisensieooreenkoms"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Sleutelbord"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Watter installasieklas verlang u?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installeer/Opgradeer"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Is hierdie 'n installasie of opgradering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Aanbevole"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Kundige"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Opgradeer"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Pakketseleksie word opgedateer"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Knoppie-emulasie"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Knop-2 Emulasie"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Knop-3 emulasie"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Stel PCMCIA op..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE word opgestel"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "geen beskikbare partisies"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Hegpunte vir partisies word nou gesoek"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Kies die hegpunte"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
-"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
-"(fout is %s)\n"
-"\n"
-"Will u al die partisies verwyder?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DrakX kon nie die partisietabel korrek interpreteer nie.\n"
-"Gaan aan op u eie risiko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal  herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Geen wortellêerstelsel gevind nie"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Basispartisie"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Wat is die basispartisie (/) van u stelsel?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Kies die partisies om te formatteer"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Toets vir foutiewe areas?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partisies word formateer"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lêer %s word geskep en formatteer"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Soek vir beskikbare pakkette"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Soek vir pakkette om op te gradeer."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Klaar (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Aanbevole (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Laai vanaf floppie"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Oplaai vanaf floppie"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakketkeuse"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Stoor op floppie"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Kies pakket om te installeer"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Wag"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
-"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
-"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM getiteld \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Berei installasie voor"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installeer nou pakket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Postinstallasiekonfigurasie"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"U het nou die kans om enkripsieprogrammatuur af te laai.\n"
-"\n"
-"WAARSKUWING:\n"
-"\n"
-"A.g.v. die verskillende algemene vereistes wat van toepassing gemaak word "
-"deur\n"
-"wetgewing,  moet die eindgebruiker van hierdie sagteware seker wees dat die\n"
-"wette in sy/haar land dit wel toelaat dat om hierdie agteware af te laai, "
-"aan te hou\n"
-"en te gebruik.\n"
-"Daarbenewens moet die gebruiker seker maak dat plaaslike wetgewing nie "
-"oortree\n"
-"word nie. Misbruik kan lei tot ernstige sanksies.\n"
-"\n"
-"In geen geval kan MandrakeSoft nog sy vervaardigers en verskaffers "
-"verantwoordelik\n"
-"gehou word vir spesiale, indirekte or toevallige skade berokken (insluitend, "
-"maar nie\n"
-"beperk tot, winsverlies, besigheidsonderbreking, dataverlies en enige "
-"voorspruitende laste\n"
-"soos moontlik bepaal deur die wetgewende hof) wat vooruitspruit uit die "
-"gebruik, besit\n"
-"of aflaai van hierdie programmatuur nie, na tekening wat hierdie ooreenkoms "
-"nie.\n"
-"\n"
-"\n"
-"Vir navrae vewant aan hierdie ooreenkoms, kontak asb.\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Spieël word gekontak vir die lys van pakkette"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies 'n spieël waar die pakkette verkry kan word"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Spieël word gekontak vir die lys van pakkette"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wat is u tydsone?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardewareklok gestel vir GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Outotydsinkronisasie met NTP"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-bediener"
-
-#
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Verwyder CUPS-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Geen drukker"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Beskik u oor nog?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Opsomming"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Muis"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tydsone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Drukker"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-kaart"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Klankkaart"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kaaer"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "KDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Plaaslike lêers"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Kies 'root' se wagwoord"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Geen wagwoord"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP-magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Basis-dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS-magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
-"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel.\n"
-"\n"
-"Indien u 'n herlaaiskyf wil maak,\n"
-"plaas 'n skyf in die aandrywer en druk \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Eerste sagteskyfaandrywer"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Tweede sagteskyfaandrywer"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Mis hierdie stap"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
-"LILO\n"
-"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sit 'n skyf in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Herlaaiskyf word geskryf"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Herlaaistelsel word voorberei"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Wil u aboot gebruik?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
-"word die eerste partisie vernietig?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Herlaaistelselinstallasie"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sit 'n leë floppie in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Outoinstallasieskyf word geskep."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bepaalde stappe is nie afgehandel nie.\n"
-"\n"
-"Wil u werklik nou aborteer?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Geluk, installasie is afgehandel.\n"
-"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
-"\n"
-"\n"
-"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
-"bekyk die errata beskikbaar op\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
-"hoofstuk in die Offisiële Liux-Mandrake Gebruikersgids."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Skep outoinstallasieskyf"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Outomaties"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Herspeel"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Stoor pakketseleksie"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installasie %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> tussen elemente  | <Space> selekteer | <F12> volgende skerm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu is weg"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Kies 'n lêer"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Gevorderd"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Wag asb."
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Maak boom oop"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Maak boom toe"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Skakel tussen plat- en groepsortering"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Swak keuse, probeer weer\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opsies: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Wil u aboot gebruik?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tseggies (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Duits"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaans"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finnies"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Frans"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norweegs"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pools"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russies"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sweeds"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "VK sleutelbord"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "VSA sleutelbord"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanies"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenies (oud)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenies (tikmasjien)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latyns)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgies"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaars"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliaans (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarussies"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Switsers (Duitse uitleg)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Switsers (Franse uitleg)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tseggies (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Duits (geen dooie sleutels)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Deens"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norweegs)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniaans"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgies (Russiese uitleg)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgies (Latynse uitleg)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grieks"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongaars"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroaties"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelies"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelies (Foneties)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranies"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Yslandies"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiaans"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanees 106 sleutels"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreaanse sleutelbord"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latyns-Amerikaans"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanies AZERTY (oud)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanies AZERTY (nuut)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanies \"nommerry\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanies \"foneties\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvies"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Masedonies"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nederlands"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pools (QWERTY uitleg)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pools (QWERTZ uitleg)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadees (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanies (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanies (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russue (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloveens"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serwies (Kirillies)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabel"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai sleutelbord"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik sleutelbord"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (tradisionele \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (moderne \"Q\" modem)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukranies"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "VSA internasionale sleutelbord"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Viëtnamees \"nommerry\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavs (latynse uitleg)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Sirkulêre heg %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Verwyder eers die logiese volumes\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Muis"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generiese PS2 wielmuis"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knop"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generiese 2-knop muis"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generies"
-
-#
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wiel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriaal"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generiese 3-knop muis"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Reeks (seriaal)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Muis (seriaal, ou C7 tipe)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmuis"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knoppies"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knoppies"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "niks"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Geen muis"
-
-#
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Toets asb. die muis"
-
-#
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Om die muis te aktiveer"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG DIE WIEL!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finnies"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Volgende ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Vorige"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Is dit korrek?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konnekteer aan die internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Die mees algemene metode vir ADSL is om  pppoe te gebruik.\n"
-"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
-"Indien u nie weet nie, kies 'gebruik pppoe'."
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gebruik dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gebruik pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gebruik pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Watter DCHP-kliënt wil u gebruik?\n"
-"Verstek is dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie.\n"
-"Ek kan nie hierdie konneksietipe opstel nie."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Kies die netwerkkoppelvlak"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "geen netwerkkaart gevind nie"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Stel netwerk op"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Sekere DHCP-bedieners benodig die rekenaarnaam.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''."
-
-#
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Rekenaarnaam"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Netwerkkonfigurasie-assistent"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksterne ISDN-kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Watter tipe is u ISDN-konneksie?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ou konfigurasie (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurasie"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Kies u internetdiensvoorsiener.\n"
-"Indien nie in die lys nie kies Ongelys"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europese protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europese protokol (EDSS1)"
-
-#
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol vir die res van die wêreld"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol vir die res vd wêreld \n"
-" geen D-Kanaal nie (bruikhuurlyne)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Watter protokol verlang u?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Oor watter tipe kaart beskik u?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ek weet nie"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
-"wees.\n"
-"\n"
-"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Aborteer"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Gaan voort"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Wat is u ISDN-kaart?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
-"PCI-kaart op die volgende skerm."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opbelopsies"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Konneksienaam"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefoonnommer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Aantekenkode"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skriptipe"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminaaltipe"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeinnaam"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-bediener (opsioneel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"U kan diskonnekteer or herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"U kan u konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "U is tans aan die internet gekonnekteer."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"U kan aan die internet konnekter of u konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "U is nie tans aan die internet gekonnekteer nie."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konnekteer"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Diskonnekteer"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Stel netwerk op"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetkonneksie en konfigurasie"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ons gan nou die %s konneksie konfigureer.\n"
-"\n"
-"\n"
-"Drk OK om voort te gaan."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Omdat u  netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
-"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
-"& Netwerkkonneksie te herkonfigureer.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Welkom by die Netwerkkonfigurasie-assistent\n"
-"\n"
-"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
-"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Kies die profiel om te konfigureer"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Gebruik outobespeuring"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Toestel word afgetas..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normale modemkonneksie"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "Op poort %s bespeur"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konneksie"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s bespeur"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konneksie"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "op koppelvlak %s bespeur"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelkonneksie"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabelkonneksie bespeur"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN konneksie"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(e) bespeur"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Kies die konneksie wat u wil konfigureer"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"U het meer as een internetkonneksiemetode opgste.\n"
-"Kies die een wat u verlang.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetkonneksie"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Daar was 'n probleem met die herlaai van die netwerk.\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
-"\n"
-"Die kongiurasie gaan op u stelsel toegepas word.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
-"om die rekenaarnaamveranderingprobleem te voorkom."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
-"konnekteer.\n"
-"U kan die toestel net so aanvaar.\n"
-"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
-"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
-"(1.2.3.4) gegee word."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigureer netwerktoestel %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(drywer %s)"
-
-#
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adres"
-
-#
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmasker"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Outomatiese IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''.\n"
-"U mag ook die netwerkhek byvoeg indien daar een is"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS bediener"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Netwerkportaaltoestel"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Instaanbedienerkonfigurasie"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP instaanbediener"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP instaanbediener"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Instaanbediener moet begin met http://"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Instaanbediener moet begin met ftp://"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wil u nou aan die internet konnekteer?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Konneksie word getoets..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Die stelsel is nou aan die internet gekonnekteer."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
-"Probeer om u stelsel te herkonfigureer."
-
-#
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konneksiekonfigurasie"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Vul asb. die velde hieronder in"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kaart IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kaartgeheue (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kaart I/O"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kaart IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kaart IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "U persoonlike telefoonnommer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Voorsienernaam (bv voorsiener.co.za)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Voorsiener se telefoonnommer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Voorsiener DNS 1 (opsioneel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Voorsiener DNS 2 (opsioneel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Kies u land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Belmetode"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Konneksiespoed"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Konneksie tydlimiet (in sekondes)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Gebruikerskode"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Wagwoord"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "heg het gefaal"
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
-"Die enigste oplossing is om die primêre partisie te skuif sodat die gat\n"
-"langs die ekstensie partisies is"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Herstel van léer %s het gefaal: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout in die skryf van %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Iets vrots gebeur op u hardeskyf.\n"
-"'n Dataintegriteitstoets het misluk.\n"
-"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
-"eindig."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "benodig"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "belangrik"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "baie oulik"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "oulik"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "moontlik"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Nuwe generasie LPR"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Lyndrukkerdiensprogram"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Druk sonder drukkertou"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Plaaslike drukker"
-
-#
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Eksterne drukker"
-
-#
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Eksterne CUPS-drukker"
-
-#
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Eksterne LPD-drukker"
-
-#
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkdrukker (sok)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Eksterne Netware-drukker"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Tik  drukkertoestel URI in"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Pyk drukstuk na program"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Onbekende model"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Plaaslike drukker"
-
-#
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Eksterne drukker"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Fout in die skryf van %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(op %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(op hierdie rekenaar)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-bediener IP:"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Verstek)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Kies drukkerkonneksie"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hoe is die drukker gekonekteer?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-"op te stel nie; drukkers wod outomaties bespeur.\n"
-"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfigurasie"
-
-#
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Verwyder CUPS-bediener"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adres moet iets soos 192.168.1.20. lyk"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Die poortnommer moet  heeltal wees."
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-bediener IP:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Poort"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Outomatiese CUPS konfigurasie"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Toestel word afgetas..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Toets poorte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Voeg drukker by"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Plaaslike drukker"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Eksterne drukker"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Gebruik outobespeuring"
-
-#
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s bespeur"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Tik  drukkertoestel URI in"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Plaaslike drukker"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Tik  drukkertoestel URI in"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Kleurkonfigurasie"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
-"van die drukkkerbediener en die naam van die drukkertou\n"
-"voorsien word."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Eksterne bedienernaam"
-
-#
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Eksterne bedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Eksterne drukkernam ontbreek!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) drukkeropsies"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
-"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
-"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
-"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-bedienernaam"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-bediener IP:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Drukkernaam:"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Werkgroep:"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Óf die bedienernaam óf die bediener-IP moet verskaf word!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "SAMBA-deelnaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare drukkeropsies"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
-"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
-"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
-"die drukkernaam; toepaslike gebruikerskode en wagwoord."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Drukkerbediener"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Drukkertounaam"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-bedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-tounaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Sokdrukkeropsies"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
-"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
-"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
-"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
-"wat saam met die hardeware gekom het."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Drukkerbedienernaam"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Drukkerbedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Drukkertoestel URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
-"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
-"spoelprogramme ondersteun nie."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Elke drukker benodig  naam (bv. lp).\n"
-"Die Beskrywing- en Liggingvelde is opsioneel.\n"
-"Hulle dien as inligting vir gebruikers."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Drukkernaam"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beskrywing"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ligging"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Drukkerdata word gelees..."
-
-#
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Is dit korrek?"
-
-#
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Oor watter tipe drukker beskik u?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsie %s moet 'n nommer wees"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsie %s is buite bereik!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Toetsbladsye"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Geen toetsbladsye"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Druk"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standaard toetsbladsy"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternatiewe toetsbladsy (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fototoetsbladsy"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Toetsbladsy(e) word gedruk..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-"Drukstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukker gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Het dit reg gewerk?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Geen drukker"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Sluit af"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Netwerk op pad af"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Netwerk op pad af"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Drukkeropsies"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Dra drukkerkonfigurasie oor"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Moet nie drukkers oordra nie"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Oordrag"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nuwe drukkernaam"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s word oorgedra..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Konneksie word begin..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Hoog"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoïes"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Installeerde sagteware word deursoek..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng word verwyder..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD word verwyder..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Kies drukkerspoelprogram"
-
-#
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Drukkeropsies"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Drukkerstelsel:"
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Drukker"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normale modus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Wil u die konfigurasie toets?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drukker %s: %s %s\n"
-"Wil u hierdie drukker verander?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Gaan voort!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Drukkerkonneksietipe"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Drukkernaam,. beskrywing, ligging"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Drukkervervaardiger, model, drywer"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Drukkervervaardiger, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Maak hierdie die verstekdrukker"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Wil u die konfigurasie toets?"
-
-#
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Verwyder drukker"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Verstek drukker"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Drukker \"%s\" is nou die verstekdrukker"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Wil u die werklik die drukker verwyder?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Instaanbedienerkonfigurasie"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Poort"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Instaanbediener moet begin met http://"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Die poortgedeelte moet numeries wees"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Vul asb. die FTP-instaanbediener inligting in\n"
-"Los dit oop indien u nie  FTP-instaanbediener verlang nie"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Instaanbediener moet begin met ftp://"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Gebruikerskode"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Herhaal wagwoord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Geen wagwoord"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Die wagwoorde stem nie ooreen nie. Probeer weer!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan nie lêer %s skryf nie"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid het gefaal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron is skeduleerder vir periodiese instruksies."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd word gebruik om battery status te monitor en dit dan te log via "
-"syslog.\n"
-"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
-"swak is."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
-"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
-"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
-"funksionaliteit\n"
-"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
-"konfigurasie."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM verleen muisvermoëns aan teksgebaseerde Linuxapplikasies soos\n"
-"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
-"konsole toe asook opspringkieskaarte."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is 'n WWW-bediener.\n"
-"Dit kan HTML-lêers uitstuur en CGI's hanteer"
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
-"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
-"vir\n"
-"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
-"waarvoor\n"
-"inetd verantwoordelik is."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
-"keyboard\n"
-"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
-"dit\n"
-"op meeste rekenaars ongesper laat."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
-"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-"rekenaarname na IP-adresse toe om te skakel."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Heg en ontheg all netwerklêerstels (NFS), SMB (Lan Manger/Windows)\n"
-"en NCP (Netware) hegpunte."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
-"herlaaityf te begin."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
-"die /etc/exports lêer opgestel."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens vorosien die NFS-lêersluitfunksionaliteit."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
-"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
-"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
-"veilig om op rekenaars te hê wat dit nie nodig het nie."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
-"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
-"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
-"van een bediener na 'n ander oordra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Stoor en herstel die stelselentropiepoel vir hoë kwaliteit,\n"
-"lukraaknommergenerasie."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
-"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
-"meer komplekse protokolle nodig vir komplekse netwerke."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
-"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
-"aangeteken is op ander samewerkende rekenaars."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
-"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop.  (Amper soos "
-"'finger')."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Laai die klankstelsel op u rekenaar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
-"te log na 'n verskeidenheid loglêers. Dit is altyd goed om syslog te loop."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Laai die drywers vir u USB-toestelle"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Druk"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Stelselmode"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Datbasis"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktief"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "onaktief"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "met herlaai"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Toestand"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol vir die res van die wêreld"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internettoegang"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Beheersentrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Netwerkkoppelvlak"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB-bedienernaam"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Speletjies"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Kundige"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "verpligtend"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Installeer pakket %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmak."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Outoinstallasiekonfigurasieprogram"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Outomatiese Stappe Konfigurasie"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Geluk!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die floppie is sukselvol geskep.\n"
-"U kan nou weer 'n installasie uitspeel."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Terugluslêer %s word geformateer"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Pakketkeuse"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Verwyder tou"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Verwyder Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Probeer asb. weer"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Probeer asb. weer"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Geen wagwoord"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN konneksie"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Kies drukkerkonneksie"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Netwerkkoppelvlak"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "gebruik hardeksyfoptimisasie?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "gebruik hardeksyfoptimisasie?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Wag"
-
-#
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Wiel"
-
-#
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Wiel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Module opsies:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Stel lêerstelsels op"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opsies"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Herstel vanaf floppie"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Ander"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Installeer stelsel"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Herstel vanaf lêer"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Herstel vanaf lêer"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Aangepaste"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Vorige"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Toestand"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Herstel vanaf lêer"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Teks"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Kies pakkette om te installeer"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Korrupte rugsteunlêer"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Stoor in lêer"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Konfigurasie"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Sluit konfigurasie af"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Stel lêerstelsels op"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s is nie gevind nie"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Klaar"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formatteer floppie"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Berei installasie voor"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "Laai dit"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "beperk"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formateer partisies"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Deïnstallasie van RPMs"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Sluit konfigurasie af"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Hegpunt"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Kies die partisies om te formatteer"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Kantoor"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Aborteer"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Drukker"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Installeer stelsel"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Selekteer lOer"
-
-#
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Verwyder drukker"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Beginboodskap"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Verlaay installasie"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetkonneksiedeling"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetkonneksiedeling is ontsper"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "deaktiveer"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ignoreer/sien oor"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "herkonfigureer"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Bedieners word gedeaktiveer..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetkonneksiedeling is gedeaktiveer"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetkonneksiedeling is gesper"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "Aktiveer"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Bedieneers word aktiveer..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetkonneksiedeling is geaktiveer"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Koppelvlak %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
-"hardewarekonfigurasieprogram."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netwerkkoppelvlak"
-
-#
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
-"\n"
-"%s\n"
-"\n"
-"Ek gaan nou u LAN met daardie kaart opstel."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Outomatiese CUPS konfigurasie"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS-bediener IP:"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Vuurmuurkonfigurasie gevind!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
-"dietyd self regstellings moet aanbring."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurasie in aabou..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme met Installasue van pakket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Internetkonneksiedelingkonfigurasie"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Internetkonneksiedeling"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerkkonfigurasie (%d toestelle)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiel:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Vee profiel uit..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profiel om uit te vee..."
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nuwe profiel..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Bedienernaam:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internettoegang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipe:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Portaal:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Koppelvlak:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigureer internettoegang..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN-konfigurasie"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drywer"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Koppelvlak"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Toestand"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Stel plaaslike netwerk op..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Pas toe"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Wag asb... Konfigurasie word toegpas"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Gekonnekteer"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konnekteer..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Diskonnekteer..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfigurasie"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Toestel %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Herlaaiprotokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Gelaai tydens herlaaityd"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-kliënt"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "Aktiveer nou dadelik"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiveer nou dadelik"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Konneksietipe:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Portaal"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernetkaart"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Kliënt"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Beheersentrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Kies die instrument wat u wil gebruik"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadees (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Yslandies"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seriaal"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "gebruik: keyboarddrake [--expert] [SleutelbordNaam]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-"Wil u hê dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
-"terugstuur)?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Verander CDROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
-"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kon nie die intydse opgradering begin nie !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Beginboodskap"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigurasie"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "skadu's"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Verlaat"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interessant"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatering"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Kleurkonfigurasie"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Geen 'serial_usb' gevind nie\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuleer derde knop?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Selekteer 'n videokaart"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Herlaaitoestel"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Vuurmuur\n"
-"\n"
-"Kliek op Konfigureer om die standaard vuurmuur op te stel."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kies u taal"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Kies installasieklas"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Hardeskyfdeteksie."
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Stel muistoestel op"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Kies u sleutelbord"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sekuriteit"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Stel lêerstelsels op"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formateer partisies"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Kies pakkette om te installeer"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installeer stelsel"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Stel netwerk op"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigureer dienste"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installeer herlaaistelsel"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Maar 'n herlaaiskyf"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Stel X op"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Installeer stelsel"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Verlaay installasie"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasie is voltooi. Moet ons hierdie veranderinge na skyf skryf?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan nie %s oopmaak nie: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kon nie %s in skryfmode oopmaak nie: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Wag asb. installasie word voorberei"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netwerkrekenaar (kliënt)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kantoor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nutsprogramme vir PalmPilot en/of Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Vuurmuur/Netwerkroteerder"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinnaam en Netwerk Informasie Bediener (DNS/NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kantoorprogramme: Woordverwerkers( kword, abiword), spreistate (kspread, "
-"gnumeric), PDF-sigprogramme, ens."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Klankprogramme: MP3- of MIDI-spelers, mengers, ens."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Boeke en HOWTO's oor Linux en Vrye Sagteware"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Hulpprogramme vir e-pos, netnuus, web, FTP en netpraat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Datbasis"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL of MySQL databasisbediener"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Hulpprogramme vir u rekenaarkonfigurasie te vergemaklik"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Klank"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Nutsprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "dokumentasie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsole hulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-posbediener, Inn netnuusbediener"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetstasie"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediastasie"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurasie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Addisionele grafiese werkskerms (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Die K-werkskermomgewing (KDE), die basiese grafiese omgewing met 'n "
-"versameling bygaande hulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafiese omgewing"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Hulpprogramme vir die skep en brand van CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kantoorwerkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Bediener"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiese programme soos Die GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitlêers"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netwerkrekenaarbediener"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-pos/Groepware/Netnuus"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Speletjiesrekenaar"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospelers en -redigeerders"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Vermaak: Arkade, Bordspel, Strategie ens."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
-"en om ook die web deur te blaai."
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Aaaargivering, emulators, monitorprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Persoonlike finansies"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"'n Grafiese omgewing met  gebruikersvriendelike stel applikasies en "
-"werkskermhulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Kliëntprogramme vir 'n verkeidenheid protokolle insluitende SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetpoort"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Klank- en videospelers/redigeerders"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ander grafiese werkskerms"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-"Redigeerders. teksverwerkers, instruksiedoppe, lêernutsprogramme, "
-"terminaalprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programme om u finansies te bestuur, soos GNUcash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persoonlike Inligtingbestuur."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD Sny"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wetenskaplike werkstasie"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Aborteer"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Geen"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Kies die verstek gebruiker:"
-
-#
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Pas toe/herlees drukkers"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "U kan die opsies vir module %s hier intik."
-
-#~ msgid "mount failed"
-#~ msgstr "heg het gefaal"
-
-#~ msgid "Low"
-#~ msgstr "Laag"
-
-#~ msgid "Medium"
-#~ msgstr "Medium"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "'n Aantal verbetering op heirdie sekuriteitsvlak, die hoof een is meer\n"
-#~ "sekuriteitswaarskuwings en -toetse."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "Boot mode"
-#~ msgstr "Herlaaimodus"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Kundige"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux beheer tyd in GMT (Greenwichmeridiaantyd) en vertaal dit dan\n"
-#~ "in u lokale tyd volgends die gekose tydsone."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Konnekteer aan die internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Diskonnekteer van die internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigureer netwerkkonneksie (LAN or internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Na watter skyf wil u skuif?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Kies die pakkette wat u wil installeer"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome werkstasie"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache is 'n WWW-bediener.\n"
-#~ "Dit kan HTML-lêers uitstuur en CGI's hanteer"
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-#~ "rekenaarname na IP-adresse toe om te skakel."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Wat is u muistoestel?"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Beskikbare NFS-gedeëlde hulpbronne word gesoek"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Beskikbare NFS-gedeëlde hulpbronne van bediner %s word gesoek."
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Beskikbare SAMBA-gedeëlde hulpbronne word gesoek"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Beskikbare SAMBA-gedeëlde hulpbronnevan bediener %s word gesoek"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Verlaat"
-
-#~ msgid "Removable media"
-#~ msgstr "Verwyderbare media"
-
-#~ msgid "Active"
-#~ msgstr "Aktief"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nee"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "'n Drukker, model \"%s\", is opgespoor op "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Plaaslikte drukkertoestel"
-
-#~ msgid "Printer Device"
-#~ msgstr "Drukkertoestel:"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Toestel/Lêernaam ontbreek"
-
-#
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Drukkers op eksterne CUPS-bediener(s)"
-
-#
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Drukkers op eksterne CUPS-bediener(s)"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Stelselmode"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Ander"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Wat is u sleutelborduitleg?"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Kliek asb. op 'n partisie"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipe:"
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Korrupte rugsteunlêer"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Stel X op"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Drukkertoestel:"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Kanselleer"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "OK"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Sluit af"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Konneksie word begin..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Konneksie word afgesluit..."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Die stelsel is nou ontkoppel."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Kies die grootte van die installasie"
-
-#~ msgid "Total size: "
-#~ msgstr "Totale grootte: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Wag asb.,"
-
-#~ msgid "Total time "
-#~ msgstr "Totale tyd "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Gebruik bestaande konfigurasie vir X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Watter toestel is die drukker aan gekoppel?\n"
-#~ "(let op dat /dev/lp0 ekwiwalent is aan LPT1:)\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Waarskuwing! Die netwerkkaart is alreeds opgestel. Ek gaan dit "
-#~ "herkonfigureer?"
-
-#~ msgid "New"
-#~ msgstr "Nuut"
-
-#~ msgid "Remote"
-#~ msgstr "Ekstern"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Kliek asb. op 'n partisie"
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr ""
-#~ "Indien bo-gelyste inskrywings nie die nodige inskrywing bevat nie, voeg "
-#~ "dit hier by:"
-
-#~ msgid "Shared resource"
-#~ msgstr "Gedeëlde hulpbron"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Vaagheid (%s). Wees meer presies\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (verstek %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "U keuse? (Verstek %s tik 'none' vir geen)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kan nie /etc/sysconfig/autologin oopmaak vir lees nie: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Wil u die netwerk herlaai?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Stem u saam?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ek gaan nou die netwerktoestel herlaai: \n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ek gaan nou die netwerktoestel %s herlaai. Stem u saam?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Indien u spesifiek anders weet, is die gewone keuse \"/dev/hda\"\n"
-#~ "(primêre meester IDE-skyf) of \"/dev/sda\" (eerste SCSI-skyf)."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr ""
-#~ "Konneksie tydlimiet (in sekondes) [ beta, nog nie geïmplementeer nie ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Kon nie \"%s\" die verstek drukker maak nie!"
-
-#
-#~ msgid "Test the mouse here."
-#~ msgstr "Toets die muis hier."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Kies voorkeurtaal vir installasie en stelselgebruik."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Kies die sleutelborduitleg uit die bostaande lys"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Selekteer:\n"
-#~ "\n"
-#~ "  - Afgemeet: Indien u vertroud genoeg is met GNU/Linux, kan u die "
-#~ "primêre\n"
-#~ "  gebruik van u rekenaar kies. Sien onder vir details.\n"
-#~ "\n"
-#~ "  - Kundige: Indien u vlot is in GNU/Linux en 'n hoogs aangepaste "
-#~ "installasie wil\n"
-#~ "  doen, kan u die deur die gebruik van u rekenaar te kies.\n"
-#~ "  MOET ASB. NIE HIERDIE OPSIE KIES INDIEN U NIE WEET WAT U DOEN NIE."
-
-#, fuzzy
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Die verskillende opsies vir u rekenaar se gebruik (indien u \"Afgemeet"
-#~ "\" \n"
-#~ "of  \"Kundige\" sou kies) is die volgende:\n"
-#~ "\n"
-#~ "  - Normaal: Indien die rekenaar primêr vir daaglikse kantoorgebruik is.\n"
-#~ "     Moenie programmeringspakette verwag nie.\n"
-#~ "\n"
-#~ "  - Ontwikkeling: Indien die rekenaar vir programontwikkel;ing gebruik "
-#~ "sal\n"
-#~ "     word. 'n Volledige stel kompileerders, saamstellers en ontfouters "
-#~ "sal \n"
-#~ "     opgesit word.\n"
-#~ "\n"
-#~ "  - Bediener: Indien die rekenaar primêr 'n bediener sal wees, hetsy met "
-#~ "NFS,\n"
-#~ "     SMB, drukkerbediening, NIS magtiging ens.\n"
-#~ "     Moenie vensterstelsels soos KDE en GNOME verwag nie.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "U kan nou die pakketgroepe kies wat u wil installeer of opgradeer.\n"
-#~ "\n"
-#~ "DrakX sal dan kyk of daar genoegsame spasie is vir die volledige "
-#~ "installasie.\n"
-#~ "Indien nie sal u verwittig word. Indien u voortgaan, sal van die minder "
-#~ "belangrike\n"
-#~ "pakkette nie installeer word nie.Heel onder kan u die opsie \"Individuele "
-#~ "pakketkeuses\"\n"
-#~ "kies waarna u deur meer as 'n 1000 pakkette sal moet blaai....."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Indienu al die CDs in die bogenoemde lys het, kliek OK.\n"
-#~ "Indien u geen het nie, kliek Kanselleer.\n"
-#~ "Indien sekere CDs weg is, onselekteer hulle en kliek dan OK."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "U kan nou die opbelopsie invul. Indien u\n"
-#~ "twyfel kry die korrekte inligting van u ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sleutel in:\n"
-#~ "\n"
-#~ "  - IP-adres: Indien u dit nie weet nie vra u netwerkadministrateur of "
-#~ "ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Netmasker: \"255.255.255.0\" is gewoonlik 'n goeie keuse. Indien u "
-#~ "twyfel,\n"
-#~ "     vra die netwerkadministrateur of ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Outomatiese IP: Indien u netwerk bootp of dhcp protokolle ondersteun, "
-#~ "kies\n"
-#~ "     hierdie opsie. In so 'n geval is 'n IP-adresinskrywing nie nodig "
-#~ "nie. Indien u\n"
-#~ "     twyfel, vra die netwerkadministrateur of ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Indien u netwerk NIS gebruik, kies \"Gebruik NIS\". Indien u twyfel vra\n"
-#~ "die netwerkadministrateur."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "U kan nou die opbelopsie invul. Indien u\n"
-#~ "twyfel kry die korrekte inligting van u ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Indien u instaanbedieners wil gebruik, stel hulle hier op.. Indien u "
-#~ "twyfel vra\n"
-#~ "die netwerkadministrateur of ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "U kan 'n kriptografiese pakket installeer indien u internetkonneksie reg "
-#~ "opgestel is.\n"
-#~ "Kies eers die spieël waar u die pakket vanaf wil aflaai en kies dan die "
-#~ "pakkette\n"
-#~ "om te installeer.\n"
-#~ "\n"
-#~ "Let wel: U moet 'n spieël en pakkette selekteer n.a.l plaaslike wetgewing."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "U kan nou die 'root' wagwoord voorsien vir u Mandrake Linux stelsel.\n"
-#~ "Die wagworod moet twee keer ingevoer word en te verfiëer dat dit\n"
-#~ "korrek is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is die administrateur van die stelsel en is die enigste gebruiker\n"
-#~ "wat toegelaat wiord om die stelselkonfigurasie te verander. In dié lig,\n"
-#~ "kies asb. die wagwoord sorgvuldig. Ongemagtigde gebruik van die root\n"
-#~ "rekening kan uitermatiglik nadelig wees vir die integriteit van die\n"
-#~ "stelsel. Die wagwoord moet alfanumeries wees en ten minste 8 karakters\n"
-#~ "lank. MOENIE die wagwoord êrens neerskryf nie. Moet dit nie te lank of "
-#~ "te\n"
-#~ "ingwikkeld maak nie, u moet dit met min moeite onthou."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "U mag nou een of meer gewone gebruikersrekeninge skep. Dit is in\n"
-#~ "teenstelling met die bevoorregte 'root' rekening. Elke "
-#~ "gebruikersrekening\n"
-#~ "sal oor sy eie voorkeure (grafiese omgewing, programstelling, ens.) en\n"
-#~ "tuisgids (waar hierdie instellings gestoor word) beskik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derhalwe moet u in die stelsel intkeen met u eie gebruikerskode en slegs\n"
-#~ "'root' gebruik vir administratiewe doeleindes.\n"
-#~ "\n"
-#~ "Skep eerstens 'n rekening vir uself. Selfs indien u die enigste "
-#~ "gebruiker\n"
-#~ "op die stelsel sal wees, moet u NIE as 'root' vir u daaglikse gebruik\n"
-#~ "inteken NIE. 'n Onbruikbare stelsel kan net een tikfout ver weg wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derhalwe moet u aanteken met die gebruikerskode wat u hier skep en "
-#~ "'root'\n"
-#~ "net vir admintratiewe doeleindes gebruik."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO en Grub hoof opsies is:\n"
-#~ "  - Herlaaitoestel: Stel die naam van die toestel (bv. hardeskyfpartisie\n"
-#~ "     wat die herlaaisektor bevat. Indien u spesifiek anders weet\n"
-#~ "     kies \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Wagperiode voor verstekbedryfstelsel gelaai word. Kies die syfer in\n"
-#~ "     tiendes van 'n sekonde at die herlaaistelsel moet wag.\n"
-#~ "     Hierdie is handig op stelsels wat onmiddelik die hardeskyf skop na "
-#~ "die\n"
-#~ "     sleutelbord geaktiveer is. Die herlaaistelsel sal nie wag nie indien "
-#~ "die\n"
-#~ "     wagperiode nul is.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Videomode: Kies die spesifieke VGA teksmode wat gebruik moet word "
-#~ "met\n"
-#~ "      herlaai. Die volgende waardes is beskikbaar:\n"
-#~ "      * normaal: selekteer normale 80x25 mode.\n"
-#~ "      * syfer: die ooreenstemmende teksmode."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO 'n herlaaiprogram vir SPARC. Dir kan GNU/Linux of enige ander\n"
-#~ "bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word "
-#~ "hierdie\n"
-#~ "bedryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing "
-#~ "maak\n"
-#~ "op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-#~ "\n"
-#~ "\n"
-#~ "U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-#~ "nodige\n"
-#~ "inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om "
-#~ "die\n"
-#~ "betrokke bedryfstelsels te laai."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO hoofkeuses is:\n"
-#~ "  - Herlaaitoestel: Waar wil u die inligting om GNU/Linux te laai plaas? "
-#~ "Die beste is\n"
-#~ "gewoonlik om \"Eerste hardeskyfsektor (MBR)\" te kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Wagperiode voor verstekbedryfstelsel gelaai word. Kies die syfer in\n"
-#~ "     tiendes van 'n sekonde at die herlaaistelsel moet wag.\n"
-#~ "     Hierdie is handig op stelsels wat onmiddelik die hardeskyf skop na "
-#~ "die\n"
-#~ "     sleutelbord geaktiveer is. Die herlaaistelsel sal nie wag nie indien "
-#~ "die\n"
-#~ "     wagperiode nul is."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Dit is tyd om die X-vensterstelsel op te stel. Hierdie is die kern van\n"
-#~ "die GNU/Linux grafiese omgewing. Vir hierdie doeleindes, moet u 'n "
-#~ "videokaart\n"
-#~ "en monitor kies. Meeste van hierdie stappe is outomaties en u moet net\n"
-#~ "verifiëer of dit korrek is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Na konfigurasie sal X outmaties gelaai word, behalwe as u DrakX "
-#~ "andersins\n"
-#~ "aansê. Indien die stelling u nie pas nie, kom terug en verander so veel\n"
-#~ "keer soos nodig."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Indien iets verkeerd is in die X-konfigurasie, gebruik hierdie opsies om\n"
-#~ "die X-vensterstelsel reg op te stel."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Indien u verkies om 'n grafiese intekenarea te kry, kies \"Ja\", "
-#~ "andersins \"Nee\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "U stelsel gaan nou herlaai.\n"
-#~ "\n"
-#~ "U nuwe Mandrake Linux stelsel sal outomaties laai. Indien u 'n ander\n"
-#~ " bedryfstelsel wil laai, lees die ekstra instruksies noukeurig deur."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skryf /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatteer almal"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Na formatering van alle partisies"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "alle data om hierdie partisies sal verloor word"
-
-#~ msgid "Reload"
-#~ msgstr "Herlaai"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Wil u 'n outoinstallasieskyf maak vir Linux replikasie?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfigurasie"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-#~ "op te stel nie; drukkers wod outomaties bespeur.\n"
-#~ "Indien u twyfel, kies \"Eksterne CUPS-bediener\"."
-
-#~ msgid "Remote queue"
-#~ msgstr "Eksterne drukkertou"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Eksterne tounaam ontbreek!"
-
-#~ msgid "Command line"
-#~ msgstr "Instruksielyn"
-
-#~ msgid "Modify printer"
-#~ msgstr "Verander drukker"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Netwerkmonitor"
-
-#~ msgid "Profile "
-#~ msgstr "Profiel"
-
-#~ msgid "Connection Time: "
-#~ msgstr "Konneksietyd"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Internetkonneksie"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Internetdiskonneksie"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Diskonnekteer van die internet het misluk."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Diskonneksie van die internet sukssevol"
-
-#~ msgid "Connection complete."
-#~ msgstr "Konneksie suksesvol"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Verstek loopvlak"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Konfigurasielêerinhoud is onverstaanbaar"
-
-#~ msgid "Adapter"
-#~ msgstr "Toestel"
-
-#~ msgid "Disable network"
-#~ msgstr "Sper netwerkstelsel"
-
-#~ msgid "Enable network"
-#~ msgstr "Aktiveer netwerk"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (of ADSL) konneksie"
-
-#~ msgid "Choose"
-#~ msgstr "kies"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "U kan die URI, om die drukker via CUPS te gebruik, direk spesifiseer"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ja, druk ASCII toetsbladsy"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ja, druk die PostScript toetsbladsy"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papiergrootte"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Stoot papier uit na voltooiing?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-dryweropsies"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kleurdiepte opsies"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Druk teks as PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Korrigeer trapsgewyse teks?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Aantal bladsye per uitsetblad?"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Regs/Links kantlyne in punte (1/72 van 'n duim)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Bo/Onder kantlyne in punte (1/72 van 'n duim)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Ekstra GhostScriptopsies"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Ekstra teksopsies"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Omgekeerde bladsyorde"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Kies eksterne drukkerkonneksie"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Elke drukker benodig 'n naam (bv. lp)\n"
-#~ "Ander parameters soos 'n beskrywing en 'n ligging kan ook gegee word.\n"
-#~ "Wat is die drukker se naam en wat is die konneksietipe?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Elke drukkertou (waar drukstukke heengaan) het 'n naam nodig \n"
-#~ "(baie keer 'lp') and 'n gekoppelde spoelgids. Watter naam en\n"
-#~ "spoelgids moet gebruik word?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Tounaam"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spoelgids"
-
-#~ msgid "Disable"
-#~ msgstr "Deaktiveer"
-
-#~ msgid "Enable"
-#~ msgstr "Aktiveer"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Om 'n veiliger stelsel te bou, moet u \"Gebruik skadulêer\" \n"
-#~ "en \"Gebruik MD5 wagwoorde\" kies."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Indien u netwerk NIS wil gebruik, kies \"Gebruik NIS\" hier. Indien u "
-#~ "twyfel vra\n"
-#~ "die sysadmin.."
-
-#~ msgid "yellow pages"
-#~ msgstr "geelbladsye"
-
-#~ msgid "Light configuration"
-#~ msgstr "Ligte konfigurasie"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Voorsiener DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Voorsiener DNS 2"
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Wil u nou aan die internet konnekteer?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Selekteer lOer"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Konfigureer internetkonneksie"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Stel X op"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Stel netwerk op"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Hierdie skrip laai de nodige modules vir 'n USB-muis."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nou dat u internetkonfigurasie opgestel is,\n"
-#~ "moet u die rekenaar opstel om dit te deel.\n"
-#~ "LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-#~ "stel.\n"
-#~ "\n"
-#~ "Wil u internetdeling opstel?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Outomatiese afhanklikhede"
-
-#, fuzzy
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Stel X op"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Maar 'n herlaaiskyf"
-
-#~ msgid "Choice"
-#~ msgstr "Keuse"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "U kan nou 'n paar diverse opsies vir u stelsel kies.\n"
-#~ "\n"
-#~ "  - Optimeer hardeskyf. Hierdie kan hardeskyfwerksverrigting verbeter, "
-#~ "maar is net\n"
-#~ "     vir kundige gebruikers bedoel. Sekere gebroke koppelvlakke kan data "
-#~ "ruïneer.\n"
-#~ "     Die bedryfstelsel kern het 'n swartlys van hardeskywe, maar indien u "
-#~ "onaangename\n"
-#~ "     verrassings wil voorkom los hierdie opsie uit.\n"
-#~ "\n"
-#~ "  - Sekuriteitsvlak: Lees die handleiding vir volledigheid, maar in "
-#~ "kort:\n"
-#~ "     Kies \"Medium\" indien u twyfel. Vir 'n hoogs veilige stelsel kies "
-#~ "\"Paranoïes\",\n"
-#~ "     maar pasop: OP HIERDIE VLAK KLAN SELFS NIE 'ROOT' OP DIE KONSOLE\n"
-#~ "     AANTEKEN NIE. Vir 'root' toegang moet 'n gewone gebruiker eers "
-#~ "aanteken en dan\n"
-#~ "     \"su\". Dit is uitsluitlik vir 'n bediener bedoel.\n"
-#~ "\n"
-#~ "  - Presiese geheuegrootte: Daar is geen ongelukkig standaard metode om "
-#~ "die geheuegrootte\n"
-#~ "     uit die BIOS te bepaal nie. Soms sal Linux nie die grootte korrek "
-#~ "bepaal nie. In hierdie geval\n"
-#~ "     kan die korrekte grootte her gegee word. Let daarop dat 'n verskil "
-#~ "van 2-4MB normaal is.\n"
-#~ "\n"
-#~ "  - Outohegting van verwyderbare media: Indien u nie elke keer die "
-#~ "hegting per intik wil doen\n"
-#~ "     nie (van CDROMs, floppies, ZIpaandrywers ens.), selekteer hierdie "
-#~ "opsie.\n"
-#~ "\n"
-#~ "  - NumLock: Indien u NumLock wil aansit by herlaaityd, selekteer hierdie "
-#~ "opsie. Dit sal\n"
-#~ "     nie noodwendig NumLock onder X aansit nie."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Arbitrêre items"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Diverse vrae"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "U kan nie supermount in  hoë sekuriteitsvlak gebruik nie."
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Warskuwing: IN HIERDIE SEKURITEITSVLAK, kan ROOT nie by die KONSOLE "
-#~ "AANTEKEN nie.\n"
-#~ "OM 'root' te wees moet u eers as 'n gewone gebruiker aanteken en dan 'su'."
-#~ "Hierdie is spesifiek vir bedienergebruik. U is gewaarsku!"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Wees versigtig, met NumLock aan sal heelwat sleutels as syfers eerder as "
-#~ "karakters na vore kom. (Bv 'n 'p' mag dalk '6' wees)"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Eerste DNS bediener"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Tweede DNS bediener"
-
-#~ msgid "loopback"
-#~ msgstr "teruglus"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Watter herlaaistelsel(s) verlang u?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Outoinstallasieskyf"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Soekj vir 'n modem?"
-
-#~ msgid "Configure local network"
-#~ msgstr "Stel netwerk op"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Plaaslike netwerk is alreeds opgestel: Wil u?"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Konfigureer tydsone"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(kan data korrupteer)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Aansit van NumLock met herlaai"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Bevestig wagwoord"
-
-#~ msgid "default"
-#~ msgstr "verstek"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Waarvoor word u stelsel gebruik?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Kies die grootte van die installasie"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Gebruik diskdrake"
-
-#
-#~ msgid "Customized"
-#~ msgstr "Gespesialiseerde"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Is u 'n kundige? U sal sal toegelaat word om kragtige, maar\n"
-#~ "gevaarlike keuses uit te oefen\n"
-#~ "\n"
-#~ "U sal vrae gevra word soos: \"Gebruik skaduwagwoorde?\"\n"
-#~ "Is u reg vir sulke vrae?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Gebruik skadulêer"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Gebruik MD5 wagwoorde"
-
-#~ msgid "Search"
-#~ msgstr "Soek"
-
-#~ msgid "Package"
-#~ msgstr "Pakket"
-
-#~ msgid "Tree"
-#~ msgstr "Boom"
-
-#~ msgid "Sort by"
-#~ msgstr "Gesorteer volgens"
-
-#~ msgid "Category"
-#~ msgstr "Kategorie"
-
-#~ msgid "Installed packages"
-#~ msgstr "Installeerde pakkette"
-
-#~ msgid "Available packages"
-#~ msgstr "Beskikbare pakkette"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Wys net eindnodes"
-
-#~ msgid "Expand all"
-#~ msgstr "Maak boom oop"
-
-#~ msgid "Collapse all"
-#~ msgstr "Maak boom toe"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Voeg pakketareas by"
-
-#~ msgid "Update location"
-#~ msgstr "Dateer ligging op"
-
-#~ msgid "Find Package"
-#~ msgstr "Soek pakket"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Soek pakket met lêer"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Skakel tussen installeerde en beskikbare"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Afhanklikhede word getoets"
-
-#
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Die volgende pakkette gaan verwyder word"
-
-#~ msgid "Regexp"
-#~ msgstr "Regex"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Watter pakket soek vir"
-
-#~ msgid "No match"
-#~ msgstr "Geen treffer"
-
-#~ msgid "No more match"
-#~ msgstr "Niks meer treffers nie"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake is in lae-geheue opstelling.\n"
-#~ "Ek gaan rpmdrake herlaai om soektogte toe te laat."
-
-#
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Watter lêer verlang u?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Wat soek vir?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Gee 'n (engelse) naam (bv. 'extra')"
-
-#~ msgid "Directory"
-#~ msgstr "Lêergids"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Geen cdrom beskikbaar nie (niks in /mnt/cdrom nie)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL van die lêergids met die RPM's"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Vir FTP en HTTP, moet die pad vir die hdlist gegee word\n"
-#~ "Dit moet relatief tot bg. URL wees."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Voorsien asb. die volgende inligting"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s is lareeds in gebruik"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Die RPM's se basis word opgedateer"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Inskrywing %s gaan verwyder word"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Eindnodes word gesoek"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Soek van eindnodes neem 'n tydjie"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Ek het 'n ISDN-kaart gevind\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Ander lande"
-
-#
-#~ msgid "In which country are you located ?"
-#~ msgstr "In watter land is u?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Indien u ADSL-modem 'n Alcatel is, kies Alcatel, andersins ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "moenie pppoe gebruik  nie"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (belangrik)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (baie oulik)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (oulik)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#~ msgid "Czech"
-#~ msgstr "Tseggies"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaaks"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Kon nie ipchains RPM m.b.v.  urpmi installeer nie."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Kon nie dhcp RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Kon nie linuxconf RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Kon nie bind RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Kon nie caching-nameserver RPM m.b.v. urpmi installeer nie.  "
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Herkonfigureer plaaslike netwerk"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr "U rekenaar is opgestel om sy internet konneksie te deel.\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Internetkonneksiedeling is ontsper.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Konnekteer aan die internet met  gewone modem"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Konnekteer aan die internet met ISDN"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Konnekteer aan die internet met DSL (of ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Konnekteer aan die internet met kabel"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Tyd, in sekondes, van onaktiwiteit voor diskonneksie.\n"
-#~ "Los oop om dié funksie te sper."
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Duitsland (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Wat wil u doen?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installasie/Redding"
-
-#~ msgid "Rescue"
-#~ msgstr "Redding"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Watter partisietipe verlang u?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Selekteer:\n"
-#~ "\n"
-#~ "  - Afgemeet: Indien u vertroud genoeg is met GNU/Linux, kan u die "
-#~ "primêre\n"
-#~ "  gebruik van u rekenaar kies. Sien onder vir details.\n"
-#~ "\n"
-#~ "  - Kundige: Indien u vlot is in GNU/Linux en 'n hoogs aangepaste "
-#~ "installasie wil\n"
-#~ "  doen, kan u die deur die gebruik van u rekenaar te kies.\n"
-#~ "  MOET ASB. NIE HIERDIE OPSIE KIES INDIEN U NIE WEET WAT U DOEN NIE."
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "U kan nou kies watter partisie(s) gebruik kan word om Mandrake Linux\n"
-#~ "op te installeer indien hulle reeds bestaan (geskep uit 'n vorige "
-#~ "installasie,\n"
-#~ "of met 'n ander partisieprogram). In ander gevalle moet die partisies nog "
-#~ "geskep\n"
-#~ "word. Hierdie operasie bestan uit die logiese verdeling van die hardeskyf "
-#~ "in\n"
-#~ "aparte bruikbare areas\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u nuwe partisies moet skep, gebruik \"Outo-allokasie\" om "
-#~ "outomaties\n"
-#~ "partisies vir Linux te skep. U kan die skyf vir partisionering selekteer "
-#~ "deur\n"
-#~ "op \"hda\" te kliek vir die eerste IDE hardeskyf, hdb vir die tweede of "
-#~ "\"sda\"\n"
-#~ "vir die eerste SCSI skyf ens.\n"
-#~ "\n"
-#~ "\n"
-#~ "Twee algemene partisies is die \"root\" partisie (/), wat die wortel is\n"
-#~ "van die lêergidsstelsel, en /boot, wat die nodige lêers bevat om die\n"
-#~ "bedryfstelsel aan die gang te kry wanneer die rekenaar aangesit word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Omdat die gevolge van hierdie proses onomkeerbaar is, kan partisionering "
-#~ "baie\n"
-#~ "intimiderend en stresvol vir die onervare gebruiker wees. DiskDrake maak "
-#~ "dié\n"
-#~ "proses heelwat makliker. Lees die dokumentasie en neem u tyd voor u "
-#~ "voortgaan.\n"
-#~ "\n"
-#~ "\n"
-#~ "U kan enige opsie gebruik deur die sleutelbord te gebruik. Navigeer deur "
-#~ "diepartisies met\n"
-#~ "Tab en die pyltjies. Wanneer 'n partisie gekies is, gebruik:\n"
-#~ "\n"
-#~ "- Ctrl-c om 'n partisie te skep (wanneer 'n leë partisie gekies is)\n"
-#~ "\n"
-#~ "- Ctrl-d om 'n partisie uit te vee\n"
-#~ "\n"
-#~ "- Ctrl-m om 'n partisie te heg\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Enige partisies wat nuut geskep is, moet eers formateer word voor "
-#~ "gebruik.\n"
-#~ "(Formateering beteken die skep van 'n lOerstelsel). U kan nou kies om "
-#~ "ook\n"
-#~ "bestaande partisies te herformateer en die data daarop te vernietig.\n"
-#~ "NOTA: Dit is nie nodig om alle bestaande partisies te herformateer nie,\n"
-#~ "veral indien daar data op is wat u wil hou. 'n Tipiese voorbeeld is /home."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Die gekose pakette gaan nou installeer word. Hierdie proses\n"
-#~ "sal 'n paar minute neem. Indien u 'n opgradering gekies, kan dit\n"
-#~ "nog langer neem voordat die opgradering begin."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Indien DrakX nie u muis kon vind nie, of as u wil sien\n"
-#~ "wat gedoen is, sal u moet die bg. lys van muistoestelle gepresenteer\n"
-#~ "word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u met DrakX saamstem, spring na die afdeling wat u\n"
-#~ "verlang deur op die kierkaart links te kliek. Andersins kies\n"
-#~ "'n muistoetsel in die kieskaart wat u dink die beste klop met die\n"
-#~ "muis wat u het.\n"
-#~ "\n"
-#~ "In geval van 'n seriaalmuis, moet u ook vir DrakX die seriaalpoort\n"
-#~ "gee."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Hierdie afdeling is vir die konfigurasie van 'n lokaalareanetwerk\n"
-#~ "of 'n modem.\n"
-#~ "\n"
-#~ "Kies \"LAN\" en DrakX sal probeer om 'n Ethernetkaart in u rekenaar\n"
-#~ "te vind. PCI-kaarte sal heelwaarskynlik outomaties gevind en\n"
-#~ "inisialiseer word. Indien u 'n ISA-kaart het sal daar 'n kieslys\n"
-#~ "vertoon word waaruit u dan u kaart moet selekteer.\n"
-#~ "\n"
-#~ "\n"
-#~ "indien u Mandrake Linux installeer op 'n stelsel wat deel is van 'n\n"
-#~ "bestaande netwerk, sal due netwerk administrateur u alreeds met die\n"
-#~ "nodige inligting (IP adres, netmasker en rekenaarnaam) voorsien het.\n"
-#~ "Indien u 'n privaat netwerk opstel (sso by die huis), dan moet u die\n"
-#~ "adresse kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kies \"Uitbel met Modem\" en die internetkonneksie vir 'n modem\n"
-#~ "sal opgestel word. DrakX sal u modem probeer bepaal. Indien dié faal\n"
-#~ "sal u die modem en korrekte seriaalpoort moet selekteer."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux kan verskeie drukkers gebruik. Elkeen van hierdie tipes\n"
-#~ "verlang 'n ander opstelling. Let asb. daarop dat die verstek drukkernaam "
-#~ "'lp' is.\n"
-#~ "U moet so 'n drukker skep.  U kan egter addisionele name bysit deur dit "
-#~ "met die '|' karakterte skei.\n"
-#~ "Derhalwe kan u dus die drukker 'n meer betekenisvolle naam ook toeken.\n"
-#~ "Die drukker met 'lp' in die naam sal die verstek drukker wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u drukker direk aan die rekenaar gekoppel is, selekteer\n"
-#~ "\"Lokale Drukker\". U moet dan die korrekte poort uitwys\n"
-#~ "en die gepaslike filter selekteer.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u 'n drukker om 'n ander Unix-rekenaar wil gebruik, kies\n"
-#~ "\"Eksterne lpd\". In hierdie geval moet u die naam van die drukkertou\n"
-#~ "op die ander rekenaar ken.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u toegang tot 'n SMB drukker (op 'n Windows-rekenaar) verlang,\n"
-#~ "moet u die SMB/NETBIOS naam (nie TCP/IP-naam nie) ken en moontlik ook "
-#~ "die\n"
-#~ "IP-adres. Daarby moet u ook 'n gebruikerskode, werkgroep en wagwoord en "
-#~ "die\n"
-#~ "drukkernaam voorsien. Dieselfde geld vir 'n Netware-drukker, behalwe dat "
-#~ "u\n"
-#~ "die werkgroep hoef te voorsien nie."
-
-# ../help.pm_.c:240 ../help.pm_.c:481 msgid ""
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Dit word sterk aanbeveel dat u \"Ja\" antwoord. Indien u Windows sou\n"
-#~ "herinstalleer, sal dit die herlaaisektor oorskryf. Indien u die die "
-#~ "herlaaiskyf\n"
-#~ "gemaak het nie, sal u nie weer in GNU/Linux kan inkom nie."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Draai u wiel!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Vergeet van die veranderinge?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Wat is u muistipe?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "OUtomatiese resolusies"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Ek gaan nou probeer m die beskikbare resolusies te kry.\n"
-#~ "Die skerm sal 'n paar maal flits...\n"
-#~ "U kan die skerm afsit indien u wil, ek sal biep wanneer ek klaar is"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ek kan probeer om al die beskikbare resolusies te kry (bv. 800x600).\n"
-#~ "Soms kan die rekenaar ophang.\n"
-#~ "Wil u probeer?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Geen geldige modes was gevind nie\n"
-#~ "Probeer 'n ander videokaart of monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Outomatiese resolusie soektog"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "DHCP-kliënt"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB-muis"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB-muis (2 knoppe)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB-muis (3+ knoppe)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB-muis"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB-muis (2 knoppe)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB-muis (3+ knoppe)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Busmuis"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft busmuis"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech busmuis"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Muis (3 knoppe of meer)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A of beter (seriaal)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (seriaal)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (seriaal)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (seriaal)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generiese Muis (seriaal)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft aanpasbaar (seriaal)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Generiese 3-knopmuis (seriaal)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (seriaal)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Ek moet u netwerkkaart konfigureer om aan die internet te konnekteer."
-
-#~ msgid "nfs mount failed"
-#~ msgstr "NFS heg het gefaal"
-
-#~ msgid "Socket"
-#~ msgstr "Sok"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografie"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX sal konfigurasielêers maak vir beide XFree 3.3 en XFree 4.0.\n"
-#~ "By verstek sal die 4.0 bediener gebruik word indien u videokaart  "
-#~ "ondersteun. word\n"
-#~ "\n"
-#~ "Wil u XFree 3.3 behou?"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Stel LAN op"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Moenie netwerk opstel nie"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Wil u die netwerk vir u stelsel opstel?"
-
-#~ msgid "Show less"
-#~ msgstr "Vertoon minder"
-
-#~ msgid "Show more"
-#~ msgstr "Vertoon meer"
-
-#, fuzzy
-#~ msgid "tie"
-#~ msgstr "koppel"
-
-#~ msgid "brunette"
-#~ msgstr "brunette"
-
-#~ msgid "girl"
-#~ msgstr "meisie"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondine"
-
-#, fuzzy
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Wat is u sleutelborduitleg?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Soek PCMCIA-kaarte?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Soek vir %s-toestelle?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Wil u die opbelkonneksie (modem) konfigureer?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Soek vir PCI-toestelle?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Wortelpartisisie word gesoek."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr ""
-#~ "%s: Hierdie is nie 'n wortellêerstelsel nie, kies asb. 'n ander een."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Watter partisie moet u wortelpartisie wees?"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "U het geen Windows-partisies nie!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "U het nie genoeg spasie vir Lnx4win nie."
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Welkom by %s die bedryfstelselkeuseprogram!\n"
-#~ "\n"
-#~ "Om die moontlikhede te vertoon, druk <TAB>.\n"
-#~ "\n"
-#~ "Om 'n spesifieke een te laai, tik die nodige naam en druk <ENTER> of wag\n"
-#~ "%ds en die verstek bedryfstelsel sal laai.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Welkom by %s die bedryfstelselkeuseprogram!\n"
-#~ "\n"
-#~ "Om die moontlikhede te vertoon, druk <TAB>.\n"
-#~ "\n"
-#~ "Om 'n spesifieke een te laai, tik die nodige naam en druk <ENTER> of wag\n"
-#~ "%ds en die verstek bedryfstelsel sal laai.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO hoofopsies"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Hier is die huidige SILO-inskrywings\n"
-#~ "U kan byvoeg or verwyder soos nodig."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Hierdie etiket is alreeds in gebruik"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO installasie het gefaal a.g.v. hierdie fout: "
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX will probeer om eers te kyk vir een of meer bekende PCI\n"
-#~ "SCSI kaarte. Indien iets gevind word, en die drywers daarvoor\n"
-#~ "bekend is, sal dit outomaties bygevoeg word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u 'n ISA SCSI kaart het, of 'n onbekende PCI SCSI kaart, of\n"
-#~ "geen SCSI kaart nie, sa; u gevra word of daar enige SCSI kaarte is.\n"
-#~ "Indien daar geen is nie, antwoord \"Nee\". Indien daar wel is, antwoord\n"
-#~ "\"Ja\" en 'n lys van kaarte sal gegee word waaruit u moet kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Na seleksie van die drywer, sal DrakX of vra vir opsies. Probeer eers\n"
-#~ "dat die drywer die hardeware ondervra; dit werk gewoonlik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien nie, moenie die dokumentasie van u hardeware vergeet nie; ook nie\n"
-#~ "enige inligting van Windows (indien u dit gennstalleer het). Hierdie is\n"
-#~ "opsies wat u die drywer moet verskaf."
-
-#~ msgid "Shutting down"
-#~ msgstr "Stelselafsluiting"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
deleted file mode 100644
index bad02e711..000000000
--- a/perl-install/share/po/ar.po
+++ /dev/null
@@ -1,10269 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Djaghlouli Kamel <djkamel@chez.com>, 2000.
-# Mohammed Gamal <f2c2001@yahoo.com>, 2002
-# Boujaj Mostapha Ibrahim <mboujaj@yahoo.de>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-08 02:00GMT\n"
-"Last-Translator: Mohammed Gamal <f2c2001@yahoo.com>\n"
-"Language-Team: ARABIC <ar@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "اعداد كل الرؤوس بشكل مستقل"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "استخدام امتداد Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "قم بإعداد البطاقة \"%s\" �قط (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "إعداد متعدد الرؤوس"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"نظامك يدعم الإعداد متعدد الرؤوس.\n"
-"ماذا تريد أن ت�عل؟"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "اختر بطاقة شاشة"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "إختر خادم X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "خادم X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "إختر مشغل X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "مشغل X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "أي اعداد لـXFree تريد؟"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"يمكن لبطاقتك الحصول على دعم للتسريع ثلاثي الأبعاد لكن �قط مع XFree %s.\n"
-"بطاقتك مدعومة عن طريق XFree %s التي يمكن أن تكون مدعومة بشل أ�ضل �ي الوضع "
-"ثنائي الأبعاد."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "يمكن لبطاقتك الحصول على دعم للتسريع ثلاثي الأبعاد مع XFree %s"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s مع تسريع ثلاثي الأبعاد"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"يمكن لبطاقتك التمتع بدعم للرسوم ثلاثية الأبعاد مع XFree %s, \n"
-"لاحظ أن هذا الدعم تجريبي و قد يتسبب �ي ايقا� جهازك."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s مع دعم تجريبي للرسوم ثلاثية الأبعاد"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"يمكن لبطاقتك التمتع بدعم للتسريع ثلاثي الأبعاد لكن �قط مع XFree %s, \n"
-"لاحظ أن هذا الدعم تجريبي و قد يتسبب �ي ايقا� جهازك.\n"
-"بطاقتك مدعومة عن طريق XFree %s التي يمكن أن تكون مدعومة بشكل أ�ضل �ي وضعية "
-"الرسوم ثنائية الأبعاد."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (مشغل عرض التثبيت)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "إعداد XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "إختر حجم ذاكرة بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "إختر خيارات الخادم"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "إختر شاشة"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "الشاشة"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"المعاملان المهمان جدا هما نسبة الإنعاش الأ�قي, و هي النسبة التي\n"
-"يتم �يها انعاش الشاشة كاملة, و الأهم هو نسبة التزامن الأ�قي\n"
-"و التي �ي خلالها يتم عرض خطوط المسح.\n"
-"\n"
-"من *المهم جدا* أن لا تحدد نوع شاشة مع متوسط تزامن\n"
-"أكبر من مقدرة شاشتك لأنك بهذا قد تدمر شاشتك.\n"
-" اذا لم تكن متأكدا يمكنك اختيار اعدادات عادية."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "نسبة الإنعاش الأ�قي"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "نسبة الإنعاش الرأسي"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "الشاشة غير معدّة"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "لم يتم اعداد بطاقة الشاشة حتى الآن"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "ام يتم اعداد دقة العرض حتى الآن"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "هل تريد تجربة الإعداد؟"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "تحذير: اختبار بطاقة العرض هذه قد يتسب �ي ايقا� جهازك"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "اختبار الإعداد"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"حاول تغيير بعض المعاملات"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "ظهر خطأ:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "المغادرة �ي %d ثوان"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "هل هذا هو الضبط الصحيح؟"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "ظهر خطأ, حاول تغيير بعض الماملات"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "اختر دقة العرض و عمق الألوام"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "بطاقة الشاشة: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "خادم XFree86 :%s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "أكثر"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "موا�ق"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "وضعية الخبير"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "اظهار الكل"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "لوحة الم�اتيح: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "نوع ال�أرة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "جهاز ال�أرة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "تزامن الشاشة الأ�قي: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "انعاش الشاشة الرأسي: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "بطاقة الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "معر� بطاقة الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ذاكرة بطاقة الشاشة: %s كيلوبايت\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "عمق الألوان: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "دقة العرض: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "خادم XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "مشغل XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "جاري تجهيز تهيئة X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "ماذا تريد أن ت�عل؟"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "تغيير الشاشة"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "تغيير بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "تغيير خيارات الخادم"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "تغيير دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "عرض المعلومات"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "اختبر مرة أخرى"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "خروج"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"هل تريد ح�ظ التغييرات؟\n"
-"الإعداد الحالي هو:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X عند بدء التشغيل"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"يمكنني جعل جهازك يبدأ X بشكل آلي بعد الإقلاع.\n"
-"هل تريد X أن بيدأ بعد إعادة تشغيل جهازك؟"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "يرجى اعادة تسجيل الدخول الى %s لتنشيط التغييرات"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "يرجى تسجيل الخروج ثم استخدم Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 لون )8 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 أل� لون )15 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 أل� لون )16 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 مليون لون )24 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 بليون لون )32 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 كيلوبايت"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 كيلوبايت"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 ميغابايت أو أكثر"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor that can do 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor that can do 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "القطاع اول من تجزئة الإقلاع"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "القطاع الأول من القرص (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "تثبيت SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "أين تريد تثبيت محمّل الإقلاع؟"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "تثبيت LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO مع قائمة نصية"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO مع قائمة رسومية"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "الإقلاع من DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "خيارات محمّل الإقلاع الرئيسية"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "محمّل الإقلاع الم�ستخدم"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "تثبيت محمل الإقلاع"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "جهاز الإقلاع"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA )لا يعمل مع أنظمة الـBIOS القديمة("
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "مدمج"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "مدمج"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "وضعية ال�يدية"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "توقيت ما قبل اقلاع الصورة الا�تراضية"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "???§?????????© ?§???³?????????±"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "كلمة المرور )ثانيةً("
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "تشديد خيارات سطر الأوامر"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "تشديد"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "قم بتنظي� /tmp عند كل إقلاع"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "حجم الذاكرة الدقيق عند الحاجة )تم ايجاد %d ميغابايت("
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "تمكين التشكيلات المتعددة"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "اكتب حجم الذاكرة بالميغابايت"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "خيار ``تشديد خيارات سطر الأوامر`` بدون قائدة من دون كلمة مرور"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "رجاء جاول مرة أخرى"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "كلمات المرور غير متطابقة"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "رسالة Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "الوقت الأقصى لإقلاع النواة"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "تمكين الإقلاع من القرص المدمج؟"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "تمكين اقلاع OF؟"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "نظام التشغيل الا�تراضي؟"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ها هنا المخلات المختل�ة.\n"
-"يمكنك اضا�ة مدخلات أخرى أو تغيير الموجودين."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "إضا�ة"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "انتهى"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "تعديل"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ما نوع المدخل الذي تريد اضا�ته؟"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "لينكس"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "نظام آخر (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "نظام آخر (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "نظام آخر (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "صورة"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "الجذر"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "الحاق"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "للقراءة و الكتابة"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "الجدول"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "عنوان"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "الإ�تراضي"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "حجم Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "لا �يديو"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "ازل المدخل"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "غير مسموح بالعلامات ال�ارغة"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "يجب أن تحدد صورة النواة"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "يجب عليك تحديد تقسيم جذر"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "هذه العلامة مستخدمة مسبقا"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "تم ايجاد %s %s واجهات"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "هل عندك واحدة أخرى؟"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "هل لديك أي واجهات %s؟"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "لا"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "نعم"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "عرض معلومات العتاد"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "جاري تثبيت مشغل %s للبطاقة %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr ")الوحدة %s("
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "أي مشغل %s يجب أن استخدمه؟"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"�ي بعض الأحيان يحتاج مشغل %s معلومات اضا�ية لكي يعمل\n"
-"بشكل صحيح, الا أنه يمكنه العمل جيدا بدونها. هل تريد تحديد\n"
-"خيارات اضا�ية له أو تسمح للمشغل بالتحقق �ي جهازك\n"
-"عن المعلومات التي سيحتاجها؟ �ي بعض الأحيان, قد يتسبب التحقق �ي تعليق الجهاز, "
-"لكن\n"
-"لا يجب أن يتسبب ذلك �ي أي مشاكل."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "تحقق آلي"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "حدد الخيارات"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"يمكنك الآن اعطاء الخيارات للوحدة %s.\n"
-"الخيارات �ي هيئة ``name=value name2=value2 ...'' \n"
-"مثلا, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "خيارات الوحدة:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"�شل تحميل الوحدة %s.\n"
-"هل تريد المحاولة ثانية بمعاملات أخرى؟"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "الوصول الى برامج X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "الوصول الى أدوات rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "اسمح بـ\"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "الوصول الى مل�ات الإدارة"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(تم اضا�ة %s مسبقا)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "كلمة المرور هذه بسيطة جدا"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "رجاءً قم بإعطاء اسم مستخدم"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "اسم المستخدم يجب أن يحتوي �قط على الحرو� الصغيرة, الأرقام, `-' و `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "اسم المستخدم م�ضا� مسبقا"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "اض� مستخدم"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"أدخل مستخدم\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "وا�ق على المستخدم"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "الاسم الحقيقي"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "اسم المستخدم"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "الغلا�"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "أيقونة"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "دخول آلي"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"يمكنني اعداد جهازك لتسجيل الدخول آليل لمستخدم ما.\n"
-"هل تريد استخدام هذه الميزة؟"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "اختر المستخدم الا�تراضي:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "اختر مدير النوا�ذ الذي سيتم تشغيله:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "رجاء اختر لغة الاستخدام."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "يمكنكن اختيار لغات أخرى و التي ستكون متو�رة بعد التثبيت"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "الكل"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "اسمح لكل المستخدمين"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "مخصص"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "لا مشاركة"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "الحزمة %s يجب أن ت�ثبّت. هل تريد تثبيتها؟"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "يمكنك التصدير باستخدام NFS أو Samba. أي منهما تريد"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "الحزمة الضرورية %s م�قودة"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "إلغاء"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "شغّل userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"المشاركة لكل مستخدم تستخدم المجموعة \"fileshare\".\n"
-"يمكنك أن تستخدم userdrake لإضا�ة مستخدم �ي هذه المجموعة."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "مرحبا بالمخترقين"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "�قير"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "القياسي"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "مرت�ع"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "مرت�ع أكثر"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "مرت�ع جدا"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "اختر مستوى الأمن"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "مستوى الأمن"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "إستخدم libsafe للملقمات"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "لا توجد مساحو كا�ية �ي /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "سطح المكتب"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "يمكنك تثبيت محمّل الإقلاع على التجزئة %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "لا توجد مساعدة لهذا حتى الآن.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "اعداد أسلوب الإقلاع"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_مل�"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/مل�/_خروج"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Ø®"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "شاشة NewStyle التصني�ية"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "شاشة NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "شاشة تقليدية"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "شاشة Gtk+ التقليدية"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "شغّل Aurora عند الإقلاع"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "وضع Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "وضع Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"أنت تستخدم %s كمدير اقلاع حاليا.\n"
-"اضغط على تهيئة لتشغيل معالج الإعداد"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "إعداد"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "وضع النظام"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "شغّل X-Window عند بدء التشغيل"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "لا, لا أريد دخولا أليا"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "نعم, أريد دخولا آليا مع هذا )المستخدم, سطح المكتب("
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "موا�ق"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "لم يمكن �تح /etc/inittab للقراءة: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "غيغابايت"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "كيلوبايا"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "م.ب"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "تيرابايت"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d دقائق"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "دقيقة واحدة"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ثوان"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "لا يمكنني غمل لقطات للشاشة قبل التجزئة"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "ستكون لقطات الشاشة موجودة بعد التثبيت �ي %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "�رنسا"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "كوستاريكا"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "بلجيكا"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "جمهورية التشيك"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "ألمانيا"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "اليونان"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "النرويج"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "السويد"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "هولندا"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "إيطاليا"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "النمسا"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "الولايات المتحدة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "رجاء قم بعمل نسخة احتياطية من بياناتك أولا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "اقرأ جيدا!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"اذا كنت تريد استخدام aboot, �لا تنسى أن تترك مساحة �ارغة �ي\n"
-"بداية القرص (2048 قطاعات كا�ية)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "خطأ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "المعالج"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "اختر حدثا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"لديك تجزئة FAT واحدة كبيرة\n"
-")يستخدم عامة عن طريق Microsoft DOS/Windows(.\n"
-"اقترح أن تغير حجم هذه التجزئة\n"
-")اضغط عليها ثم اختر \"تغيير الحجم\"("
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "�ضلا اضغط على تجزئة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "ت�اصيل"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "التبديل"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "�ارغ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "أخرى"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "أنواع أنظمة المل�ات:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "عمل تجزئة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "النوع"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "استخدم ``%s'' بدلا من ذلك"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "إلغاء"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "استخدم ``ازالة التجهيز'' أولا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "بعد تغيير نوع التجزئة %s, �إنك ستسخر كل البيانات على التجزئة"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "إختر تجزئة"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "إختر شاشة"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "خروج"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "النتقال الى وضعية الخبير"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "الانتقال الى الوضع العادي"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "تراجع"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "هل تريد الاكمال على أي حال؟"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "الخروج بدون الح�ظ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "هل تريد الخروج بدون كتابة جدول التقسيم؟"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "هل تريد ح�ظ تعديلات /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "تحديد آلي"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "أمسح الكل"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "معلومات القرص الصلب"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "كل التجزئات الرئيسية مستخدمة"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "لا يمكنني اضا�ة أي تجزئة أخرى"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "لكي تمتلك تجزئات أكثر, يرجى الغاء تجزئة كي تتمكن من عمل تجزئة ممتدة"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "ح�ظ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "استعادة جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "إنقاذ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "إعادة تحميل جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "التجهيز الآلي للوسائط القابلة للإزالة"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "اختر مل�"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"جدول التقسيم المح�وظ ليس بن�س الحجم\n"
-"لا زلت تريد الإكمال؟"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "تحذير"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"أدخل قرصا مرنا �ي السواقة\n"
-"كل البيانات على القرص ستمحى"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "جاري محاولة انقاذ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "معلومات م�صّلة"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "نقطة التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "خيارات"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "تغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "نقل"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "تنسيق"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "جهز"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "اضا�ة الى RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "اضا�ة الى LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "ازل التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "ازالة من RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "ازالة من LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "تعديل RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "استخدام لـloopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "اعمل تجزئة جديدة"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "قطاع البداية: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "الحجم باليغابايت: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "نوع نظام الم�ات: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "نقطة التجهيز: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "الت�ضيل: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "هل تريد ازالة مل� loopback؟"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "غير نوع التجزئة"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "أي نظام مل�ات تريد؟"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "جاري التغيير من ext2 الى ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "أين تريد تجهيز مل� loopback %s؟"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "أين تريد بجهيز الجهاز%s؟"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"لم يمكن ازالة تعيين نقطة التجهيز نظرا لأن هذه التجزئة مستخدمة لـloop back.\n"
-"قم بإزالة الـloopback أولا"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "جاري حساب روابط نظام مل�ات FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "جاري تغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "هذا التقسيم غير قابل لتغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "كل البيانات على هذه التجزئة يجب ح�ظها احتياطيا"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "بعد تغيير حجم التجزئة %s, �إن كل البيانات على هذه التجزئة ست�قد"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "اختر الحجم الجديد"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "الحجم الجديد بالميغابايت: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "أي قرص تريد نقله؟"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "القطاع"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "أي قطاع تريد نقله؟"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "نقل"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "جاري نقل التجزئة..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "اختر RAID موجود للاضا�ة"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "جديد"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "اختر LVM l,جود للاضا�ة"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "اسم LVM؟"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "هذه التجزئة لا يمكن استخدامها لـloopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "اسم مل� Loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "اعط اسم مل�"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "هذا المل� مستخدم من loopback أخرى, اختر مل�ا آخر"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "المل� موجود مسبقا, هل تريد استخدامه؟"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "خيارات التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "متنوعة"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "الجهاز"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "المستوى"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "حجم chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "كن حذرا: هذه العملية خطيرة"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "أي نوع من التجزئة؟"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "جدول اتتقسيم للقرص %s سيتم كتابته الى القرص!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ستحتاج الى اعادة التشغيل قبل أن يتم ت�عيل التعديلات"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "بعد تهيئة التقسيم %s, �إن كل البيانات الموجودة على التجزئة ست�قد"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "جاري التهيئة"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "جاري تهيئة مل� loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "جاري تهيئة التجزئة %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "خبء المل�ات"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "انقل المل�ات الى تجزئة جديدة"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"الدليل %s يحتوي مسبقا على بعض البيانات\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "جاري نقل المل�ات الى التجزئة الجديدة"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "جاري نسخ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "جاري ازالة %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "التجزئة %s معرو�ة الآن بالإسم %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "الجهاز: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "حر� سواقة DOS: %s (مجرد تخمين)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "النوع: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "الاسم: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "البداية: قطاع %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "الحجم: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s قطاع"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "الاسطوانة %d الى %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "مجهز\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "غير مجهز\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "محمل\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "المستوى %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "حجم Chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "أقراص RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "اسم مل� Loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "الحجم: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "الهندسة: %s اسطوانة, %s رأس, %s قطاع\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "معلومات: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "أقراص LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "نوع جدول التقسيم: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "على bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "الخيارات: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "م�تاح تش�ير نظام المل�ات"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "اختر م�تاح تش�ير نظام المل�ات"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "م�تاح التش�ير هذا بسيط جدا (يجب أن يكون %d حر�ا على الأقل)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "م�اتيح التش�ير غير متطابقة"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "م�اتح التش�ير"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "م�اتح التش�ير (مرة أخرى)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "غيّر النوع"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "�ضلا اضعط على وسيط"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "ابحث �ي أجهزة الخادم"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s تجهيز %s قد �شل"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "لا أعر� كي� أجهز %s �ي النوع %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "بسيط"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "خادم"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "لا توجد مساحة كا�ية للتحديد الآلي"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr ""
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS  لا تسطيع ا ستعمال هذ ا البرنامج مع"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr "استمرّ بأيّة حال"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "استعمل  مكانا حرا"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "قبول"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "هل تريد �علا مغادرة التثبيت؟"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "لوحة الم�اتيح"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "رجاء, اختر لوحة الم�اتيح."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "ترقية"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "رجاء اختر لغة نوع ال�أرة."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "خادم NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "بطاقة  الصّوت ISA هل عندك عند"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "ال�أرة"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "طابعة"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "التحقق"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "خادم LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "تخطي"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "إختر مل�"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "متقدم"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "هل تريد الضغط على هذا الزر؟ "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "الألمانية"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "الإسبانية"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "ال�نلندية"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "ال�رنسية"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "النرويجية"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "البولندية"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "الروسية"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "السويدية"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "البلجيكية"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "البلغارية (صوتية)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "البلغارية (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "البيلاروسية"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "الدنماركية"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (سويدية)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "الإستونية"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "يوناني"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "المجرية (الهنغارية)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "الكرواتية"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "العبرية"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "الآيسلاندية"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "الإيطالية"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "اللات�ية"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "المقدونية"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "البرتغالية"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "السلو�ينية"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "التاميل"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "الأوكرانية"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr ""
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ولا واحد"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "إنتهاء"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "التالي ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "معالج إعداد الشبكة"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "إعداد جديد (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "إعداد قديم (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "إنهاء"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "تابع"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr ""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "اتصل"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "اقطع الإتصال"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "قم بإعداد الإتصال"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "وصلة ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "وصلة LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "وصلة انترنت"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr ""
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr ""
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr ""
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "إختر بلدك"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "سرعة الإتصال"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "الوقت الأقصى للاتصال (بالثواني)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "�شل التحميل: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "طابعة محلية"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "طابعة بعيدة"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "طابعة شبكة (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "الطابعات المحلية"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "الطابعات البعيدة"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ""
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr ""
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "على خادم CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr " CUPS اعدادات"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "الخادم CUPS حدّد"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "عنوان IP لخادم CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "البوابة"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "تهيئة CUPS آلية"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "أض� طابعة جديدة"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "طابعة محلية"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "تحقق من الطابعات آليا"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "تحقق آلي"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "تم التحقق من %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"لم يتم ايحاد طابعة محلية!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "رجاء اختر المن�ذ الموصلة إليه طابعتك."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "إعداد يدوي"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "مجموعة العمل"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "اسم مستضي� الطابعة"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "الوص�"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "المكان"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "تم اختيار النّموذج يدويًّا"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "إختيار وحدات الطابعة"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "ما هو نوع الطابعة لديك؟"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "إعداد OKI WinPrinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "إعداد Lexmark Inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"هل تريد تعيين هذه  الطابعة (\"%s\")\n"
-"كطابعة ا�تراضية؟"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "إطبع"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "طابعة خام"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "إغلاق"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "جاري الطباعة/المسح على \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "جاري الطباعة على الطابعة \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "قائمة خيارات الطابعة"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "نقل إعدادات الطابعة"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "جاري بدء الشبكة..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "لم يتم تحديد وظي�ية الشبكة"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "مرت�ع"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "أي نظام طباعة تريد أن تستخدم؟"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "إعداد الطابعة \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "جاري إعداد التطبيقات..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "تغيير نظام الطباعة"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "هل تريد تجربة إعداد طابعة أخرى؟"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "تعديل اعدادات الطابعة"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"الطابعة %s\n"
-"هل تريد تعديل تلك الطابعة؟"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "نوع وصلة الطابعة"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "اعر� كي� تستخدم هذه الطابعة"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr ""
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "إعداد البروكسي"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "عنوان"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr ""
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr ""
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr ""
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr ""
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr ""
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr ""
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "إنترنت"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "نظام"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr ""
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "خادم قواعد بيانات"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "الخدمات"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "ابدأ"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "توق�"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "الإنترنت و المراسلة"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "وسائط متعددة و رسوميات"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "مركز تحكم Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "واجهات الإستخدام"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "الالعاب"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "استشارات Mandrake"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "أداة اعداد المثبّت الآلي"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "إعداد الخطوات الآلية"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "تثبيت آلي"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "أزل المادة الأخيرة"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "رجاء اختر كل المستخدمين الذين تريد تضمينهم �ي النسخ الإحتياطي."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "ازل المادة المختارة"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "المستخدمون"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "�ضلا أدخل اسم المستضي� أو عنوان IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "رجاء أدخل اسم الدخول"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "رجاء كلمة المرور"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "تذكّر كلمة السّرّ هذه "
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "وصلة FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "وصلة آمنة"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "إلى المساعد  CD/DVDROM  الاستعمال "
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "رجاء اختر مساحة القرص المدمج"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "�ضلا قم بالتأشير هنا اذا كنت تستخدم وسيط CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "�يما مضى  CDRW من �ضلك �حص ,إذا أردت أن تمحو "
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-" من �ضلك �حص إذا أردت أن تتضمّن \n"
-"ركّب الجدر على قرصك المدمج"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "الشبكة"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "كلّ ساعة "
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "يوميًّا "
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "أسبوعيّا"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "شهريا"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "استخدم المراقب"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"�ضلا اختر ال�ترة \n"
-"ما بين كل عملية نسخ احتياطي"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"رجاء اختر\n"
-"وسيط النسخ الاحتياطي"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTPاستخدم مع المراقب"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "ماذا "
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "أين"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "متى "
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "خيارات أكثر"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "إعدادات Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "رجاء اختر أين تريد النسخ الاحتياطي."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "على القرص الصّلب"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "عبر الشّبكة"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "رجاء اختر ما تريد نسخه احتياطياً"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "نظام المساعد"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "مستخدمو المساعد"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "اخترالمستخدم يدويًّا"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"مصادر المساعد :\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"-مل�ّات النّظام  :\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"-مل�ّات المستخدم:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"-المل�ّات الأخرى:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- اح�د القرص الصّلب على الطّريق :%s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"-FTP  و على  host  اح�د على : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- خيارات:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackups use tar and bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackups use tar and gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"-Daemon (%s) include :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Network by FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Network by SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "رجاء اختر تاريخ الإستعادة"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "اختر وسيط آخر للاستعادة منه"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "وسيط آخر"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "استعد النّظام"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "أعد المستخدمين "
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "استعد آخر"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "استعادة مخصصة"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "السابق"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "ح�ظ"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "استعادة"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "التالي"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "قائمة الحزم المطلوب تثبيتها"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "رجاء اختر تاريخ الإستعادة..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "رجاء اختر وسيط النسخ الإحتياطي..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "رجاء اختر البيانات المطلوب نسخها احتياطيا..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "رجاء أدخل سرعة سواقة كتابة الأقراص"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "قم بالنسخ الآن من مل� التهيئة"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "اعرض تهيئة النسخ الإحتياطي"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "إعدادات المعالج"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "إعداد متقدم"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "�شل تثبيت %s. ظهر الخطأ التالي:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "انتهى"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs restart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "استيراد الخطوط"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "خيارات متقدمة"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "قائمة الخطوط"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "طابعات عادية (Generic)"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "تم اختيار الكل"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "ازل القائمة"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "الإختبارات الأولية"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "ما بعد التثبيت"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "ما بعد ازالة التثبيت"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "أعق"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "مشاركة اتصال الإنترنت غير ممكَّنة الآن."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr "ماذا  تحبّ أن تعمل"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "مشاركة إتصال الإنترنت ممكَّنة الآن."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "السّطح البينيّ  %s(استعمال مركبة%s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "السّطح البينيّ  %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "لا محوّل الشّبكة على نظامك"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "سطح بينيّ للشبكة "
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "واجهة الشبكة معدّة مسبقا!"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "اعداة تهيئة آلية"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "أظهر تهيئة الواجهة الحالية"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"الشّكل الحاليّ من `%s':\n"
-"n/الشّبكة : %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "عنوان IP لخادم DHCP (هذا)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Firewalling configuration  تم اكتشا� "
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "لم يتم اعداد أي مشاركة اتصال بالإنترنت"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "إعدادات مشاركة إتصال الإنترنت"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "النّبذة :"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "نبذة جد يد ة..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname :"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "النوع:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "الانتظار من �ضلك"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "إعداد LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "المحرك"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "الواجهة"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "الحالة"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "المعالج..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "تطبيق"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "يرجى الإنتظار... جاري تطبيق الإعدادات"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "متّصل "
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "غير متصل"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "متصل"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "إعداد LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "المحوّل %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP العميل "
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "إعدادات الإتصال بالإنترنت"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "إعدادات الإتصال بالإنترنت"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "نوع العلاقة"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP العميل"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "مركز التّحكّم "
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "كندة (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "الولايات المتّحدة الأمريكيّة (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "الولايات المتّحدة الأمريكيّة (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "الولايات المتّحدة الأمريكيّة  (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "الصين (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "اليابان (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "اليابان (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "أوروبّا الشّرقيّة"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "أيرلندا"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "أوروبّا الغربيّة"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "أوستراليا"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "نيوزيلندا "
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "جنوب أ�ريقيا "
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "الأرجنتين "
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"من �ضلك\n"
-" �ي معيار تلي�زيونك و البلد type"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norm :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "الاستعمال: keyboarddrake [--expert][لوحة الم�اتيح]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "من �ضلك اختر تصميم لوحة م�اتيحك"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cd-Romتغيير"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "إعرض سجلات اليوم المختار �قط"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/مل�/_جديد"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>ج"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/مل�/_�تح"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>Ù�"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/مل�/_ح�ظ"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>Ø­"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/مل�/ح�ظ با_سم"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/مل�/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/خ_يارات"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/خيارات/احتبار"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_مساعدة"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/مساعدة/_حول"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "المستخدم"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "الرسائل"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "شروح أدوات Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "بحث"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "أداة لمراقبة سجلات نظامك"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "الضبط"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "الموائمة"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "لكن ليس موائمة"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "احتيار مل�"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "التقويم"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "محتويات المل�"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "تنبية البريد/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "يرجى الإنتظار, جاري تحليل المل�: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "تهيئة تنبيه البريد/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"أهلا بكم الى أداة تهيئة البريد/SMS.\n"
-"\n"
-"هنا سيمكنك الإعداد \n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "إعدادات الخدمات"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "حمل الإعدادات"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "سو� تستلم تنبيها اذا كان التحميل أعلى من هذه القيمة"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "إعدادات التنبيه"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "أعدّ الطريقة التي سينبهك النظام بها"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "ح�ظ بإسم.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no serial_usb found\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s found on %s و�ّق بينه "
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "اختر جهاز المسح الضوئي"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "هذا %s الماسح الضّوئيّ غير مدعّم"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "جهاز الإقلاع"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "إعدادات الجدار الناري"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "أعدادات الجدار الناري"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "اختر لغتك"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "اختر نوع التثبيت"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "التحقق من الأقراص الصلبة"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "إعداد ال�أرة"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "اختر لوحة الم�اتيح الخاصة بك"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "الأمن"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "إعداد نظم المل�ات"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "تجهيز التجزئات"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "اختر الحزم التي ست�ثبَّت"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "تثبيت النظام"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "أض� مستخدم"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "تهيئة الشبكة"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "تهيئة الخدمات"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "تثبيت محمّ�ل الإقلاع"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "إعمل قرص إقلاع"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "تهيئة X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "تثبيت تحديثات النظام"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "الخروج من التثبيت"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"?قد نكتب التّغييرات هذه للقرص.  اعد اد كامل \n"
-" \n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "استطع"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%sللكتابة  %sلا يمكن أن ين�تح \n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "لا, لا أحتاج الى DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "نعم أحتاج الى DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "لا, لا أحتاج الى NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "نعم أحتاج NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "لا تح�ظ"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "إح�ظ و اخرج"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "معالج إعداد الجدار الناري"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "لا (امنع هذا من الإنترنت عن طريق الجدار الناري)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "نعم (اسمح لهذا من خلال الجدار الناري)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "يرجى الإنتظار... جاري التأكد من الحزم المثبتة"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "ويب/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "جهاز شبكة (عميل)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "خادم NFS, خادم SMB, خادم بروكسي, خادم ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "أدوات المكتب"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "محطة عمل غنوم"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "أدوات لجهاز بالم بايلوت أو �ايزور ألخاص بك"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "محطة عمل"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "جدتر ناري/موجّ�ه"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "خادم أسماء النطاثات و معلومات الشيكة"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"برامج مكتبية: معالجة الكلمات (kword, abiword), الجداول الحسابية (kspread, "
-"gnumeric) , برامج عرض pdf, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "أدوات صوتية: مشغلات mp3 أو midi, مازجات صوت, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "كتب و مذكرات 'كي� أعمل' حول لينكس و البرامج الحرة"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "محطو عمل كيدي"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "وسائط متعدددة - �يديو"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "مجموعة من الأدوات للبريد , الأخبار, الإنترنت, نقل المل�ات, و المحادثة"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "قواعد البيانات"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "خادم قواعد البيانات PostgreSQL أو MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "أدوات لتسهيل إعداد جهازك"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "وسائط متعددة - صوت"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "أدوات خدمية"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "وثائق المساعدة"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "أدوات سطر الأوامر"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "خادم البريد Postfix, خادم الأخبار Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "محطة انترنت"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "محطة وسائط متعددة"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "أدوات الإعدادات"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "أسطح مكتب رسومية أكثر (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"بيئة سطح مكتب كيدي, البيئة الرسومية الأساسية مع مجموعة من الأدوات المصاحبة"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "بيئات رسومية"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "أدوات لعمل و نسخ الأقراص"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "محطة عمل مكتبية"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "خادم"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "برامج رسوميات مثل The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "برامج و مكتبات تطوير C و C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "خادم شبكات"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "بريد/أدوات مجموعات/أخبار"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "محطة ألعاب"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "برامج تشغيل و تحرير ال�يديو"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "وسائط متعددة - رسوميات"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "برامج التسلية: ألعاب �يديو, ألعاب لوحات, ألعاب ستراتيجية, الخ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"مجموعة من الأدوات لقراءة و ارسال البريد و الأخبار (pine, mutt, tin..) و "
-"لتص�ح الإنترنت"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "الأرش�ة, محاكيات, أدوات مراقبة النظام"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "الميزانية الشخصية"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"بيئة رسومية مع مجموعة من التطبيقات و أدوات سطح المكتب المناسبة للمستخدمين "
-"العاديين"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "عملاء لبروتوكولات مختل�ة مثل ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "بوابة انترنت"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "برامج تحرير/تشغيل ال�يدية و الصوت"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "أسطخ مكتب رسومية أخرى"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "محررات نصوص, أغل�ة, أدوات مل�ات, طر�يات"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "برامج لإدارة ميزانيتك مثل gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "ادارة المعلومات الشخصية"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "وسائط متعددة - نسخ أقراص"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "محطة عمل علمية"
-
-#~ msgid "About"
-#~ msgstr "حول"
-
-#~ msgid "             Help           "
-#~ msgstr "             مساعدة           "
-
-#~ msgid "None"
-#~ msgstr "ولا واحدة"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "اختر الطابعة الا�تراضية:"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "يمكنك الآن اعطاء الخيارات للوحدة %s"
-
-#~ msgid "mount failed"
-#~ msgstr "�شل التحميل"
-
-#~ msgid "Low"
-#~ msgstr "منخ�ض"
-
-#~ msgid "Medium"
-#~ msgstr "متوسط"
-
-#~ msgid "Export"
-#~ msgstr "تصدير"
-
-#~ msgid "click here"
-#~ msgstr "انقر هنا"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "تم التخقق من وجود %s, هل تريد اعداده؟"
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "رجاء اختر الطابعة التي تريد تهيئتها."
-
-#~ msgid "authentification"
-#~ msgstr "المصادقة"
-
-#~ msgid "user"
-#~ msgstr "المستخدم"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "جاري مسح مصادر nfs المشتركة المتو�رة"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "جاري مسح مصادر nfs المشتركة المتو�رة للخادم %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "جاري مسح مصادر samba المشتركة المتو�رة"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "جاري مسح مصادر samba المشتركة المتو�رة للخادم %s"
-
-#~ msgid "\\@quit"
-#~ msgstr "\\@خروج"
-
-#~ msgid "Removable media"
-#~ msgstr "وسائط قابلة للإزالة"
-
-#~ msgid "Active"
-#~ msgstr "نشط"
-
-#~ msgid "No X"
-#~ msgstr "لا X"
-
-#~ msgid " Linux "
-#~ msgstr " لينكس "
-
-#~ msgid " System "
-#~ msgstr " نظام "
-
-#~ msgid " Other "
-#~ msgstr " أخرى "
-
-#~ msgid "please choose your CD space"
-#~ msgstr "رجاء اختر مساحة القرص المدمج"
-
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "�ضلا قم بالتأشير هنا اذا كنت تستخدم وسيط CDRW"
-
-#~ msgid " Tape "
-#~ msgstr " الشريط "
-
-#~ msgid " Cancel "
-#~ msgstr " إلغاء "
-
-#~ msgid " Ok "
-#~ msgstr " موا�ق "
-
-#~ msgid "close"
-#~ msgstr "إغلاق"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "لم يمكن �تح /etc/sysconfig/autologin للقراءة: %s"
-
-#~ msgid "New"
-#~ msgstr "جديد"
-
-#~ msgid "Remote"
-#~ msgstr "بعيد"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "�ضلا اضغط الزر بالأعلى\n"
-#~ "\n"
-#~ "أو استخدم \"جديد\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "استخدم \"جديد\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "اذا لم تتضمن القائمة المدخل المطلوب, قم بإدخاله هنا:"
-
-#~ msgid "Shared resource"
-#~ msgstr "مصدر مشترك"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
deleted file mode 100644
index fb71a4b28..000000000
--- a/perl-install/share/po/az.po
+++ /dev/null
@@ -1,12924 +0,0 @@
-# Azerbaijani Turkish translation of DrakX
-# Copyright (C) 1999 MandrakeSof
-# Vasif Ismailoglu MD <azerb_linux@hotmail.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-06-09 23:30GMT +0200\n"
-"Last-Translator: Vasif İsmayıloğlu MD <azerb_linux@hotmail.com>\n"
-"Language-Team: Azerbaijani Turkish <linuxaz@azerimal.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Bütün başlıqları ayrı ayrı quraşdır"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama ifadələrini işlət"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Təkcə \"%s\" kartını qur (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Çoxlu Başlıq quraşdırılması"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sizin sisteminiz çoxlu başlıq quraşdırmasını dəstəkləyir.\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Ekran kartı"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Ekran kartınızı seçin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Bir X vericisi seçin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X verici"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Bir X vericisi seçin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X verici"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Necə bir XFree qurğusunu istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə düzgün işləyər.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir fikir olar."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "3D avadanlıq sür'ətləndirməsi ilə XFree %s"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər.\n"
-"DİQQ�T! BU SINAQ M�RH�L�SIND�DIR V� KOMPÜTERİNİZ DONDURA BIL�R."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "SINAQ M�RH�L�SİND�Kİ 3D sür'ətləndirmə dəstəkli XFree %s"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə düzgün işləyər.\n"
-"DİQQ�T! BU SINAQ M�RH�L�SIND�DIR V� KOMPÜTERİNİZ DONDURA BIL�R.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir seçki olar."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree quraşdırılması"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Ekran kartınızın yaddaş böyüklüyünü seçin"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Monitorunuzu seçin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Buradaki iki vacib parametr üfüqi ve şaquli yeniləmə sür'ətləridir.\n"
-"Seçərkən monitorunuzun qabiliyyətinin üstündə bir parametr\n"
-"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
-"Seçərkən bir qərarsızlığa düşərsəniz, alçaq rezolyusiya seçin."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Üfüqi yeniləmə sür'əti"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Şaquli yeniləmə sür'əti"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ekran kartı hələ qurulmayıb"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolyusiya hələ seçilməyib"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Diqqət: Bu qrafika kartı ilə ediləcək sınaq təhlükəlidir"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Qurğuların sınağı"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bə'zi parametrləri dəyişdirin"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Bir xəta oldu:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Bu qurÄŸular doÄŸrudur?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Bir xəta oldu, parametrləri dəyişdirin"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolyusiya"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Rezolyusiya və rəng dərinliyini seçin"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ekran kartı: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 verici: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Daha Çox"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Oldu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Usta Modu"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Hamısını Göstər"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolyusiyalar"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavatura düzülüşü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Siçan növü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Siçan avadanlığı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorun Şaquli Daraması: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorun Üfüqi Yeniləməsi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ekran kartı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Ekran kartı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ekran kartı yaddaşı: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Rəng dərinliyi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolyusiya: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 verici: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 sürücü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window qurğuları hazırlanır"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Nə etmək istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitoru Dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ekran kartını dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Verici seçənəklərini dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Rezolyusiyanı Dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mə'lumatı göstər"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Yenidən sına"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Çıx"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Mövcud qurğuları saxlayım?\n"
-"Hal-hazırkı qurğular:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ilə Açılış"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq X ilə açılması üçün qura bilərəm.\n"
-"Açılışda X Window ilə başlamaq istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "\"%s\"a(ə) təkrar girin və dəyişiklikləri fəallaşdırın"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lütfen çıxın və Ctrl-Alt-BackSpace düymələrinə basın"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 rəng (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 min rəng (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 min rəng (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon rəng (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyard rəng (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB və ya daha çox"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standart VGA, 60 Hz-dÉ™ 640x480 "
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 56 Hz-dÉ™ 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Uyğun, 87 Hz-də titrəşimli 1024x768 (800x600 yox)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 87 Hz-də titrəşimli 1024x768, 56 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Təkmilləşdirilmiş Super VGA, 60 Hz-də 800x600, 72 Hz-də 640x480"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Titrəşimsiz SVGA, 60 Hz-də 1024x768, 72 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Yüksək Frekanslı SVGA, 70 Hz-də 1024x768"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Çoxlu Frekansa qadir 60 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Çoxlu Frekansa qadir 74 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Çoxlu Frekansa qadir 76 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "70 Hz dÉ™ 1600x1200 qadir Monitor"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "76 Hz dÉ™ 1600x1200 qadir Monitor"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Açılış qisminin ilk sektoru"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektoru (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Qurulumu"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grup Qurulumu"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "Mətn menyulu LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "Qrafiki menyulu LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Wİndowsdan açıl (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Sistem yükləyicisi ana seçənəkləri"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "İstifadə ediləcək Açılış idarəcisi"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Açılış yükləyici quruluşu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Açılış avadanlığı"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (köhnə BIOSlarda işləməz)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Bəsit"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "bəsit"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Ekran modu"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Açılışda gecikmə müddəti"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Parol"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Parol (təkrar)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "�mr sətiri seçənəklərini məhdudlaşdır"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "məhdudlaşdır"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "/tmp-i hər açılışda təmizlə"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ümumi yaddaş miqdarı (%d MB tapıldı)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Birdən artıq profilə icazə ver"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Yaddaş miqdarını Mb cinsindən verin"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``�mr sətiri seçənəklərini məhdudlaşdır`` seçənəyi parolsuz bir işə yaramaz"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "İnit İsmarıcı"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Firmware Gecikməsini Aç"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Çəkirdək Açılışı Vaxt Dolması"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CDdən Açılışı Fəallaşdırım?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF Açılışı Fəallaşdırım?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "�sas OS"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n"
-"ya da mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "�lavə et"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Qurtardı"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Təkmilləşdir"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ne cür bir giriş istəyirsiniz?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linuks"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Digər sistemlər (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Digər sistemlər (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Digər sistemlər (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "�ks"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Kök"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Sonuna əlavə et"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Oxu-yaz"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Cədvəl"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "E'tibarsız"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "�sas"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd böyüklüyü"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVÄ°deo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "GiriÅŸi sil"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Boş etiket qəbul edilə bilməz"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Bu etiket istifadə edilməz"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ara üzü tapıldı"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "BaÅŸqa var?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heç %s ara üzü var?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Xeyr"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Bəli"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Avadanlıq mə'lumatına bax"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s kartı (%s) üçün sürücü yüklənir"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hansı %s sürücüsü sınansın?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bəzi hallarda, %s sürücü düzgün işləməsi üçün əlavə mə'lumat istəyə bilər.\n"
-"Sürücüler üçün əlavə bir xüsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
-"sürücülərin lazımi mə'lumatlar üçün avadalığı tanımasını mı istəyərsiniz? \n"
-"Bə'zən tanımlama kompüterinizi dondura bilər amma donduğu üçün\n"
-"kompüterinizə heç bir şey olmaz."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Avtomatik yoxla"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Seçənəkləri göstər"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"İstəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
-"Parametrlər``ad=qiymət ad2=qiymət2...'' şəklində olmalıdır.\n"
-"Məsələn ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modul seçənəkləri:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s modulunun yüklənməsi iflas etdi.\n"
-"Yenidən başqa bir parametr ilə sınamaq istəyirsiniz?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s artıq əlavə edilmişdir)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Zəif parol seçdiniz!"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Xahiş edirik bir istifadəçi adı alın"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"İstifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
-"ola bilər"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Bu istifadəçi adı artıq vardır"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "İstifadəçini əlavə et"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir istifadəçi girin\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "İstifadəçini qəbul et"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Həqiqi adı"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "İstifadəçi adı"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Qabıq"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Timsal"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Avtomatik GiriÅŸ"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq bir istifadəçi ilə başlada bilərəm.\n"
-"İstəmirsiniz isə rədd edin."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "�sas istifadəçini seçin:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Hamısı"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Xüsusi"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS başlayır"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Ləğv et"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Krakerlərə xoşgəlmişsiniz"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Zəif"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standart"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Yüksək"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Yüksək"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Şübhəci"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
-"asand\n"
-"işlədiləcək, ancaq xətalara qarşı da həssaiyyəti də artacaqdır. İnternetə \n"
-"bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parollar fəallaşdırıldı, yenə də bir şəbəkə üstündə istifadə edilməməsi "
-"tövsiyə edilir."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"İnternetə bağlı bir kompüter üçün standart və tövsiyə edilən bir "
-"təhlükəsizlik səviyyəsidir."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Bu təhlükəsizlik səviyyəsiylə sistemin bir verici olaraq istifadəsi "
-"mümkündür.  \n"
-"Təhlükəsizlik, birdən çox alıcının bağlanmasına icazə verəcək şəkildə "
-"artırılmışdır. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Biz dördüncü səviyyə haqlarını verdik və sistem xarici bağlantılara qarşı "
-"tamamilə qapalıdır.\n"
-"Təhlükəsizlik səviyyəsi indi ən üstdədir."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Təhlükəsizlik səviyyəsini seçin"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s emeliyyat sistemi secki proqramina xos gəlmissiniz!\n"
-"\n"
-"Içlerinden birini acmaq ucun adini yazin ve <ENTER>\n"
-"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Emeliyyat sistemi secici GRUB'a xos gəlmissiniz!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c ve %c duymeleri ile isıqlandırılmıs girisleri sece bilersiniz"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"acilisdan evvel emrleri duzeltmək ucun 'e', emr setiri ucun ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot içində lazımi yer yoxdur"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Masa Üstü"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "BaÅŸlama Menyusu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "hələlik yardım sistemi mövcud deyildir.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fayl"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fayl/Çı_x"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>x"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Kateqoriyasından Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "�nənəvi Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "�nənəvi Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Açılışda Auroranı başlat"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modu"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modu"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Açılış İdarəçisi olaraq hazırda %s işlədirsiniz.\n"
-"Quraşdırma sehirbazını başlatmaq üçün tıqlayın."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Qur"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistem modu"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Açılışda X-Window sistemini başlat"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Xeyr, Avtomatik giriş istəmirəm"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Bəli, bu istifadəçi üçün avtomatik giriş istəyirəm (istifadəçi, masa üstü)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Oldu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab oxunmaq üçün açıla bilmir: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Fransızca"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belçika dili"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Almanca"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Yunanca"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norveçcə"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "İsveçcə"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Ä°talyanca"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "serial"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "�vvəlcə datanızın yedəyini alın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Diqqətlə Oxuyun!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot istifadə etməyi istəyirsinizsə, boş disk sahəsi (2048 sektor bəsdir.)\n"
-"buraxmayı unutmayın."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Xəta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Sehirbaz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Monitorunuzu seçin"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tək bir böyük disk bölməniz var\n"
-"(əsasən MS DOS/Windows istifadə edər).\n"
-"�vvəlcə bu disk bölməsinin böyüklüyünü dəyişdirməyinizi\n"
-"tövsiyə edirik. �vvəlcə bölmənin üstünə, sonra \"Böyüklüyü\n"
-"Dəyişdir\" düyməsinə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "�traflı"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "baÄŸlama iflas etdi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "BoÅŸ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Digər"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Fayl sistemi növü:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Yarat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Növ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerinə ``%s'' işlət"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Sil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "�vvəlcə ``Ayır'-ı işlət"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsinin növünü dəyişdirdikdən sonra, bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Monitorunuzu seçin"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Yeni bölmə yarat"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Usta moduna keç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Normal moda keç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Davam edilsin?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Qeyd etmədən Çıx"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Avtomatik ayır"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Hamısını təmizlə"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Sabit disk seçkisi"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Bütün birinci bölmələr istifadədədir"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Artıq bölmə yaratmaq üçün, bir bölməni silib məntiqi bölmə yaradın"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Bölmə cədvəlini yaz"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Fayl seç"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Yedək bölmə cədvəli eyni böyüklüyə sahib deyil\n"
-"Davam etmək istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Xəbərdarlıq"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Disket sürücüyə bir disket yerləşdirin\n"
-"Bu disketdəki bütün mə'lumatlar yox olacaqdır"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mə'lumatı göstər"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Bağlama nöqtəsi"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Seçənəklər"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Böyüklüyünü Dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Daşı"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Şəkilləndir"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "BaÄŸla"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "RAIDə əlavə et"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "LVMə əlavə et"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ayır"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "RAIDdən ayır"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LVMdən ayır"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAIDi dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback üçün istifadə et"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Yeni bölmə yarat"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Başlanğıç sektoru: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Fayl sistemi növü: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Bağlama nöqtəsi: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Xüsusiyyətlər: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hansı dili istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%s loopback avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Bu disk bölməsi loopback üçün istifadə edildiyindən ötrü bağlanma "
-"nöqtəsindən ayrıla bilinmir.\n"
-"�vvəlcə loopback-ı ləğv edin."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Fat fayl sistemi ucları hesaplanır"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Böyüklüyü dəyişdirilir"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Hansı bölmə növünü istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölmədəki bütün mə'lumatlar yedəklənməlidir"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi böyüklüyü dəyişdirildirkdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Yeni böyüklük seçin"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hansı diskə daşımaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hansı sektora daşımaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Daşınır"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Bölmə daşınır..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "�lavə etmək üçün mövcud bir RAID seçin"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "yeni"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "�lavə etmək üçün mövcud bir LVM seçin"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM adı?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk bölməsi loopback üçün işlədilməz"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback fayl adı: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Həqiqi adı"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Fayl başqa bir loopback tərəfindən istifadədədir, başqa\n"
-"birini seçin"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fayl onsuz da vardır. İşlədilsin?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Modul seçənəkləri:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "avadanlıq"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "səviyyə"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "parça böyüklüyü"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Diqqətlı olun: bu əməliyyat təhlükəlidir."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Nəcə bölməlandirmə istəyirsən?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Bağışlayın, /boot bölməsini bu sürücüdə yarada bilməyəcəm.\n"
-"Onda ya LILO istifadə edə bilməyəcəksiniz ve /boot bölümünə \n"
-"ehtiyacınız yoxdur və ya LILO istifadəsini sınayarsınız, ancaq LILO işləməyə "
-"bilər."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Seçdiyiniz bölüm fiziki sahənin üstündə (1024. silindrin xaricində)\n"
-"/boot bölümünüz yoxdur. Lilo açılış idarəcisindən istifadə etmək "
-"istəyirsinizsə, \n"
-"/boot bölməsini əlavə edərkən çox diqqətli olmalısınız."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin "
-"etdiniz.\n"
-"�gər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n"
-"əlavə etməyi unutmayın"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sürücüsünün bölmə cədvəli diskə yazılacaq!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni qurğuların fəallaşmağı üçün sistemi yenidən başlatmalısınız"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi şəkilləndirildikdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Şəkilləndirilir"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Şəkilləndirilən bölmə: %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid iflas etdi"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolyusiya: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Avadanlıq: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sürücü hərfi: %s (sadəcə təxmini)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Növ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ad: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Başlanğıc: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Böyüklüyü: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d -dən silindr %d-yə\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Şəkilləndirilmiş\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Şəkilləndirilməmiş\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Bağlı\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback faylı:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ana açılma bölməsi\n"
-"    (MS-DOS açılışı üçün)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Səviyyə %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Parça böyüklüyü %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskləri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faylı adı: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Bəlkə də bu bir Sürücü bölməsidir.\n"
-"Onda bunu ele beləcə buraxın.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bu, ikili açılış üçün xüsusi\n"
-"Bootstrap-dır.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Böyüklük: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometriyası: %s silindr, %s baş, %s sektor\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "MÉ™'lumat: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskləri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölmə cədvəli növü: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d data yolunda, %d nö'li\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Seçənəklər: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Fayl sistemi növü: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS verici"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s şəkilləndirilməsində %s bölmə xətası"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s'i necə şəkilləndirəcəyimi bilmirəm (Növ: %s)"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrılırkən xəta oldu: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "bəsit"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "verici"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Bağlama nöqtələri / ilə başlamalıdır"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Bu bağlama nöqtəsi üçün həqiqi bir fayl sisteminə (ext2, reisrfs)\n"
-"ehtiyac vardır.\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Avtomatik yerləşdirmə üçün boş sahə yoxdur"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Yazmaq üçün açılan %s'də xəta: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlü bir sürücü "
-"tapılmadı. Bu problemin qaynağı üçün avadanlığınızı yoxlayın"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Heç disk bölməniz yoxdur!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yuxarıda sürücünüzdə tapılan Linuks bölmələri sıralanıb\n"
-"Sehirbazın tövsiyələrinə uyun, onlar çox vaxt işə yarayır.\n"
-"�gər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n"
-"Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yükləyə bilməzsəniz.\n"
-"�gər verilərinizi başqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" "
-"bölməsi də yaratmalısınız (birdən çox Linuks\n"
-"bölməniz var isə).\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, hər bölmə aşağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n"
-"\n"
-"\n"
-"\"Ad\" belə kodlanıb: \"sürücü növü\", \"sürücü mömrəsi\",\n"
-"\"bölmə nömrəsi\" (məsələn \"hda1\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" əgər sürücünüz IDE sürücüdürsə \"hd\"dirvə SCSI sürücü isə "
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n"
-"\"b\"nin mənası \"ikinci sürücü\"dür vs..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"İndi, açılışda avtomatik olaraq başlamasını istədiyiniz xidmətləri \n"
-"seçə bilərsiniz. Siçan bir maddənin üzərina gəldiyində o xidmətin rolunu "
-"açıqlayan\n"
-"kiçik bir baloncuq ortaya çıxacaqdır.\n"
-"\n"
-"�gər kompüterinizi bir verici olaraq istifadə edəcəksəniz bu addımda tam bir "
-"diqqət ayırmalısınız:\n"
-"mühtəməldir ki lazımi heç bir xidməti başlatmaq istəməzsiniz."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n"
-"qərar verəcəksiniz. �gər diskiniz boş isə və ya bir başqa sistem\n"
-"bütün yeri doldurmuş isə, o zaman diskinizdə Linuks Mandrake üçün\n"
-"yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n"
-"Bölmələndirmə əsasən diskinizdə məntiqi sürücülər yaratmaqdan ibarətdir.\n"
-"\n"
-"Ümumiyyətlə bölmələndirmənin təsiri geri dönülməzdir.Ona görə də\n"
-"bu iş çox gərgin və yorucudur. �gər özünüzə inanmırsınız isə bu\n"
-"sehirbaz sizə yardım edər. Başlamadan əvvəl xahiş edirik əl kitabçanıza\n"
-"baxın. Və bu iş üçün bir az vaxt ayırın.\n"
-"\n"
-"\n"
-"Sizə ən az 2 bölmə lazımdır. Biri sistemin özünü köçürməsi üçün\n"
-"Digəri isə uydurma yaddaş (ya da digər adı ilə Swap) üçün.\n"
-"\n"
-"\n"
-"�gər diskiniz onsuz da bölünmüş isə (əvvəlki sistemden ya da\n"
-"başqa bölmələndirmə vasitələri ilə hazırlanmış) quruluşda\n"
-"sadəcə olaraq o yerləri yükləmək üçün seçin.\n"
-"\n"
-"\n"
-"�gər disk bölünməmiş ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n"
-"Sisteminizin quruluşundan asılı olaraq müxtəlif imkanlarınız var:\n"
-"\n"
-"* Bütün diski sil: Linuks Mandrake qurmaq üçün bütün diskinizin\n"
-" üzərindəki bölmələri silər. Burada diqqətli olun.\n"
-" Sildikləriniz əsla geri gəlməz.\n"
-"\n"
-"\n"
-"* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n"
-" Microsoft Windows qurulu isə ve bütün diski əhatə edir isə\n"
-" Linuks Mandrake üçün bir yer ayırmalısınız. Bunun üçün\n"
-" ya bütün diski silməlisiniz (\"Bütün diski sil\" bax ya da\n"
-" \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iş heç "
-"bir mə'lumat itkisi olmadan da edilə bilər.Bunun başqa adı\n"
-" eyni kompüterdə həm Linuks Mandrake həm də Windows qurulu olmasıdır.\n"
-"\n"
-"\n"
-"t Bu seçkiyə getmədən əvvəl bir şeyi başa düşməlisiniz ki, yenidən "
-"bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n"
-" Yə'ni Windows altında daha az disk sahəsinə malik olacaqsınız.\n"
-"\n"
-"\n"
-"* Usta modu: �gər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli "
-"olun.\n"
-" Bu mod güçlüdür amma bir o qədər də təhlükəlidir. Diskinizdəki bütün "
-"bilgiyi asandlıqla itirə bilərsiniz.\n"
-" Təcrübəsiz isəniz bunu seçməyin."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Yeni yaradılan bütün bölmələr şəkilləndirilməlidir\n"
-"(şəkilləndirmək yəni fayl sistemi yaratmaq - format).\n"
-"\n"
-"\n"
-"Bu arada var olan hazır bölmələri də üstündəkiləri silmək üçünyenidən "
-"şəkilləndirmək istəya\n"
-"bilərsiniz.\n"
-"Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n"
-"\n"
-"\n"
-"Bunu ağlınızda tutun ki var olan bütün bölmələri şəkilləndirmək\n"
-"məcburi deyil.\n"
-"İşlətim sistəmini əmələ gətirən bölmələri (yəni\n"
-"\"/\", \"usr\" və ya \"var\"ı yenidən şəkilləndirmək üçün\n"
-"seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n"
-"buraxa bilərsiniz.\n"
-"\n"
-"\n"
-"Diqqətli olun. şəkilləndirdiyiniz bölmələrdəki verilər\n"
-"geri gəlməz.\n"
-"\n"
-"\n"
-"Şəkilləndirməyə hazır isəniz \"Oldu\" düyməsini tıqlayın.\n"
-"\n"
-"\n"
-"Yeni Linuks Mandrake sisteminizi qurmaq üçün başqa bölmə seçmək\n"
-"istəyirsiniz isə \"Ləğv et\" düyməsinə basın."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Təptəzə Linuks Mandrake sisteminizə qurulacaq. Bu da seçdiyiniz\n"
-"yükləmə böyüklüyünə və sistəminizin qabiliyyətinə görə\n"
-"bir neçə deqiqə alar.\n"
-"\n"
-"\n"
-"Xahiş edirik, səbrli olun."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu nöqtədə siz Linuks Mandrake yükləmək üçün bölmələri seçməlisiniz. �gər "
-"əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks "
-"bölmələri və ya başqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), "
-"onları seçin və istifadə edin.\n"
-"Yoxsa onları bildirməlisiniz.\n"
-"\n"
-"\n"
-"Bölmələri yaratmaq üçün əvvəlci diski seçməlisiniz.\n"
-"Diski seçmək üçün birinci IDE sürücüsü üçün \"hda\" nı, ikinciyi seçmək üçün "
-"\"hdb\"ni, birinci SCSİ sürücüsü üçün ise \"sda\" vs tıqlamalısınız.\n"
-"\n"
-"\n"
-"Seçdiyiniz sürücüyə aşağıdakıları etməyə qadirsiniz:\n"
-"\n"
-"  *Hamısını təmizlə: seçili sürücüdə bütün bölmələri silər.\n"
-"\n"
-"\n"
-"  *Avtomatik: Sürücünüzdəki boş sahədə Ext2 və Swapbölmələrini avtomatik\n"
-"yaradar.\n"
-"\n"
-"\n"
-"  *Bölmə cədvəlini qurtar: Zədələnmiş bölmə cədvəlinibərpa edər.  Xahiş "
-"edirik\n"
-" diqqətli olun, çünkü bu da iflas edə bilər.\n"
-"\n"
-"\n"
-"  *Gəri dön: İstəmədiyiniz seçkilərinizdən geri döndərər.\n"
-"\n"
-"\n"
-"  *Yenidən yüklə: Bütün dəyişikliklərinizdən geri dönərbaşdakı bölmə "
-"cədvəlinə gələr.\n"
-"\n"
-"\n"
-"  *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. Təcrübəsizisəniz bunu "
-"seçin.\n"
-"\n"
-"\n"
-" *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, "
-"bölmə cədvəlini bərpa edin.\n"
-"\n"
-"\n"
-"  *Floppy-yə qeyd et: Daha sonradan bərpa etmek üçünbilgiləri floppy-yə qeyd "
-"edin.\n"
-"  Bu seçki şiddətlə tövsiyə edilir.\n"
-"\n"
-"\n"
-"  *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyişikliklərinizi qeyd "
-"edin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, istənilən seçkiyə Tab ve Aşağı/Yuxarı oxlarını da işlədərək "
-"klaviaturadan idarə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Bölmə seçildiyi zaman bunları işlədə bilərsiniz:\n"
-"\n"
-"      *Ctrl-c yeni bölmə yaratmaq üçün (boş bölmə seçili olduğu zaman)\n"
-"\n"
-"      *Ctrl-d bölməni ləğv etmək üçün\n"
-"\n"
-"      *Ctrl-m bağlama nöqtəsini göstərmək üçün\n"
-"\n"
-"\n"
-"\n"
-"�gər PPC kompüterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFC "
-"'bootstrap' bölməsini yaboot açılış yükləyicisi üçün seçmək istəyəcəksiniz.\n"
-"�gər daha çox yeriniz varsa ; məsələn 50 MB, onda bütün kernel və ramdisk "
-"əksini təcili açılış halları üçün saxlaya bilərsiniz."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sürücünüzdə bir və ya daha çox Windows bölməsi tapıldı.\n"
-"Xahiş edirik Linuks Mandrakeni qurmaq üçün onlardan birini "
-"yenidənölçüləndirmək üzərə seçin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, her bölmə bu cür sıralanıb; \"Linuks adı\",\"Windows\n"
-"adı\"\"Həcm\".\n"
-"\n"
-"\"Linuks adı\" bu cür kodlanıb: \"sürücü növü\", \"sürücü nömrəsi\",\"bölmə "
-"nömrəsi\" (məsələn, \"hda\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" sürücünüz IDE sürücü isə \"hd\"dirSCSI sürücü isə\n"
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n"
-"\"b\"nin mənası \"ikinci sürücü\"dür vs..."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Səbrli olun. Bu əməliyyat bir neçə deqiqə sürə bilər."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Xahiş edirik Linuks Mandrakenin daha əvvəlki buraxılışları qurulu deyilsə və "
-"ya müxtəlif əməliyyat sistemlərindən istifadə etmək istəyirsinizsə \"Yüklə\" "
-"seçin.\n"
-"\n"
-"\n"
-"Xahiş edirik qurulu olan Linuks Mandrakenin əvvəlki buraxılışını güncəlləmək "
-"istəyirsinizsə \"Güncəllə\" seçin.\n"
-"\n"
-"\n"
-"Sizin GNU/Linuks biliyinizdən asılı olaraq yükləmək və ya güncəlləmək üçün "
-"Linuks Mandrakenin aşağıdakı səviyyələrini seçə bilərsiniz:\n"
-"\n"
-"* Tövsiyə edilən: �gər əvvəlcə heç GNU/Linuks ilə tanış olmadınız isə seçin. "
-"Yükləmə çox asand olacaq və çox az sual soruşulacaq.\n"
-"\n"
-"\n"
-"* Xüsusi: �gə əvvəlcə GNU/Linuksa bir az aşina isəniz, seçin. Onda siz "
-"istədiyiniz sistem növünü (Masa üstü, Verici, Təcrübi) seçə biləcəksiniz.\n"
-" �lbətdə sizə \"Tövsiyə edilən\" seçkidən daha çox sual soruşulacaq.\n"
-" Ona görə də GNU/Linuksa bir az aşina olmalısınız.\n"
-"\n"
-"\n"
-"* Usta: �gər yaxşı bir GNU/Linuks biliyinə sahibsəniz, bu sinifi seçin.\n"
-" \"Xüsusi\" sinifindəki kimi işlədəcəyiniz sistemi (Masa üstü, Verici, "
-"Təcrübi)\n"
-" seçə biləcəksiniz. Amma sizi çox çətin suallar gözləyir. Bəzən bu sualların "
-"içindən\n"
-" çıxa bilmək çox zəhmətli olur. Ona görə də nə etdiyinizi bilirsəniz, bu "
-"sinifi seçin."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Xahiş edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarşılığı\n"
-"Linuksda ttyS0'dır."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Linuks Yükləyici) və Grub açılış sistem yükləyiciləridir: sistemi "
-"Linuks\n"
-"ya da kompüterinizdə olan başqa bir əməliyyatiyle aça bilərlər.\n"
-"�sasən bu digər əməliyyat sistemləri doğru bir şəkilde təsbit edilib "
-"açılışa\n"
-"qurula bilərlər. �gər bir problem olarsa, buradan əllə əlavə edilə "
-"bilərlər.\n"
-"Parametrlər mövzusunda diqqətli olun."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Linuksu açmaq üçün lazımi bilgilərin harada saxlanılacağına qərar verin.\n"
-"\n"
-"Nə etdiyinizi bilmirsinizsə, \"Diskin ilk sektoru (MBR)\" seçin."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX PCI SCSI adapterleri axtarmağa cəhd edəcək. �gə DrakX SCSI\n"
-"taparsa və hansı sürücü işlədiləcəyini bilərsə, her şey öz özünə\n"
-"qurulacaq.\n"
-"\n"
-"\n"
-"�gər sisteminizdə SCSI adapteri yoxsa, DrakXin tanımayacağı bir\n"
-"ISA SCSI vÉ™ ya PCI SCSI adapteri var isÉ™, sizÉ™ sisteminizdÉ™ SCSI\n"
-"adapteri olub olmadığı soruşulacaq.\n"
-"�gər SCSI adapteriniz yox isə, \"Yox\" tıqlayın. �gər \"Var\"ı "
-"tıqlayarsanız.\n"
-"qarşınıza sürücüləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n"
-"\n"
-"\n"
-"�gər əllə qurmağı səçərsəniz, o zaman DrakX sizə adapterin xüsusiyyətlərini\n"
-"soruşacaq. İmkan verin ki, DrakX sərbəstcə özü xüsusiyyətləri tapsın.\n"
-"Çoxunda bu işə yarayır.\n"
-"\n"
-"\n"
-"�gər istəmirsəniz isə, o zaman adapter üçün xüsusiyyətləri özünüz\n"
-"göstərməlisiniz. Bunun üçün İstifadəçinin �l Kitabçasına\n"
-"(başlıq 3, \"Avadanlığınız üçün kollektiv mə'lumat) bölməsinə\n"
-"baxın. Ya da avadanlığınızın əl kitabçasından və ya\n"
-"veb səhifəsindən (�gər internetə çıxışınız var isə)\n"
-"ya da Microsoft Windowsdan (�gər sisteminizdə qurulu isə)\n"
-"mə'lumat alın."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Burada yaboot üçün həm başqa əməliyyat sistemləri, həm alternativ "
-"kernellər,\n"
-" ya da təcili yardım açılış əksləri əlavə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Başqa OSlər  üçün girişin mənası ad və kök çığırından ibarətdir.\n"
-"\n"
-"\n"
-"Linuks üçün mühtəməl girişlər bunlar ola bilər: \n"
-"\n"
-"\n"
-"  - Ad: Bu sadəcə olaraq yaboot üçün açılacaq sistemi timsal edən bir "
-"addır.\n"
-"\n"
-"\n"
-"  - �ks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır.  Çox vaxt bu "
-"vmlinux vÉ™ ya\n"
-"bunun variasiyalarıdır.\n"
-"\n"
-"\n"
-"  - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n"
-"\n"
-"\n"
-"  \n"
-"  - �lavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla "
-"başlanğıc\n"
-"video avadanlığı və ya sıx sıx xəta verən 2ci və 3cü siçan düymələri üçün "
-"emulyasiya\n"
-"imkanları tanına bilir.  Məsələn bunlar \n"
-"bir neçə nümunədir:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Açılış avadanlığından əvvəl bə'zi açılış modullarını seçmək\n"
-"üçün işlədilir, ya da təcili yardım açılışlarında ramdisk əksini yükləmək "
-"imkanı verir.\n"
-"\n"
-"\n"
-"  - Initrd-size: Ana ramdisk böyüklüyü ümumiyyətlə 4096 baytdır.  �gər daha "
-"geniÅŸ ramdisk bildirÉ™\n"
-"bilərsiniz isə bu seçənəyi işlədin.\n"
-"\n"
-"\n"
-"  - Oxuma-yazma: Normalda sistemin 'dirilməsindən' əvvəl bə'zi sınaqların "
-"aparıla bilməsi üçün\n"
-"'root' fayl sistemi bu moda soxulur.  Bu seçənəyi nəzərə almayabilərsiniz.\n"
-"\n"
-"\n"
-"  - NoVideo: Bəlkə Apple video avadanlığı problem çıxarda bilər.Onda bu "
-"seçənəklə\n"
-"sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n"
-"\n"
-"\n"
-"  - �sas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə "
-"bilərsiniz.\n"
-"Onda ENTER düyməsinə basmaqla Linuks sistemi açılacaqdır.  Bu giriş ayrıca "
-"TAB ilə açılış seçkilərinə baxdığınız vaxt \n"
-"'*' işarətilə işıqlandırılacaqdır."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh avadalığı üçün açılış idarəcisidir. Ayrıca\n"
-"GNU/Linuks, MacOS, və ya MacOSX sistemlərini kompüterinizdə varsa, "
-"açacaqdır.\n"
-"Normalda, bu əməliyyat sistemləri düzgün tapılıb qurula bilirlər\n"
-"�gər belə olmazsa, bu ekrandan əllə lazımi qurğuları girə bilərsiniz.\n"
-"Düzgün parametrləri girib girmədiyinizi yaxşıca bir yoxlayın.\n"
-"\n"
-"\n"
-"Yaboot ana seçənəkləri:\n"
-"\n"
-"\n"
-"  - Başlanğıc İsmarıcı: Açılışdan əvvəl çıxan sadə bir ismarıc.\n"
-"\n"
-"\n"
-"  - Açılış Avadanlığı: GNU/Linuksu hardan başlatmaq istədiyinizi bildirir."
-"Ümumiyyətlə bu mə'lumatı daha əvvəl \"bootstrap\" quraşdırılması "
-"sırasındabildirmiş olacaqsınız.\n"
-"\n"
-"\n"
-"  - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə "
-"gecikmə vardır\n"
-"Birinci gecikmə saniyələrlə ölçülür və bu arada siz\n"
-"CD, OF açılışı, MacOS və ya Linuks arasında seçki aparmalısınız.\n"
-"\n"
-"\n"
-"  - Kernel Açılış Vaxt Dolması: Bu vaxt dolması LILO açılış gecikməsinə "
-"uyğun gəlir.  Linuksu\n"
-"seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq "
-"qurulu olacaqdır.\n"
-"\n"
-"\n"
-"  - CD Açılışı Fəallaşsınmı?: Bu seçənəklə CDdən açılışı timsal edən 'C' "
-"xarakteri ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-"  - OF Açılışı Fəallaşsın?: Bu seçənəklə OFdən (Open Firmware) açılışını "
-"timsal edən 'N' xarakteri\n"
-"ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-"  - Ana OS: OF gecikməsi müddəti dolduğu vaxt hansı OSnin açılacağını "
-"göstərir."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Linuks Mandrakeni yükləmak üçün sürücüyü seçin.\n"
-"Diqqətli olun, sürücüdəki bütün mə'lumatlar silinəcək\n"
-"və geri gəlməyəcək."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sürücüdəki bütün bilgiləri və bölmələri silmək üçün\n"
-"\"Oldu\" düyməsinə basın. Diqqətli olun,\"Oldu\" düyməsinə basdıqdan sonra\n"
-"Windows bilgiləri də daxil olmaq üzərəbütün bölmə mə'lumatı geri dönməyəcək "
-"şəkildə silinəcək.\n"
-"\n"
-"\n"
-"Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" düyməsinə\n"
-"əməliyyatı ləğv edə bilərsiniz."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"bu vericiləri seçdiniz: %s\n"
-"\n"
-"\n"
-"bu vericilər əsasən fəallaşdırılır. Onların heç bir təhlükəsizlik\n"
-"problemləri yoxdur, amma bə'zi xətalar tapıla bilər. Belə olsa, mümükün olan "
-"ən yaxın zamanda güncəlləməlisiniz.\n"
-"\n"
-"\n"
-"Bu vericiləri qurmaq istəyirsiniz?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NİS domeyni olmadan translasiya işlədilə bilməz"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s sürücüsünə FAT şəkilləndirilmiş bir disket taxın"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Bu floppi FAT şəklində deyildir"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Bu saxlanmış paketlər seçkisini işlətmək üçün qurulumu ``linux "
-"defcfg=floppy''ilə başladın."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s faylı oxunurkan xəta oldu"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sisteminizdaki bə'zi avadanlıqlar işləməsi üçün düzgün sürücülərə ehtiyac "
-"duyar.\n"
-"Bunun haqqında %s də/a lazımi malumatları tapa bilərsiniz"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Bir root disk bölümüna ehtiyacınız var.\n"
-"Bunun üçün istər mövcud bir disk bölümü üzərina tıqlayın, \n"
-"ya da yeni birini başdan yaradın. Sonra \"Bağlama \n"
-"Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyişdirin."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Bir swap sahəniz yoxdur\n"
-"Davam edim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Boş sahəni istifadə et"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Var olan bölmələri işlədimmi"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Bölmə cədvəli qurtarılmağa çalışılır"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback üçün Windows bölməsini işlət"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linuks4Win'i qurmaq üçün hansı disk bölməsini istifadə edəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Böyüklüklərini seçin"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Kök (root) bölməsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap sahəsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Windows bölməsindəki boş sahəni işlət"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hansı bölmənin böyüklüyünü dəyişdirəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Fat fayl sistemi ucları hesaplanır"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT tədqiqatçımız sizin bölümləri işlədə bilmir,\n"
-"bu xəta oldu: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Sizin Windows bölümü çox dağınıqdır. Daxiş edirik, əvvəlcə birləşdirin "
-"(defraq)"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"DİQQ�T!\n"
-"\n"
-"DrakX \"Windows\" disk bölmənizin böyüklüyünü dəyişdirəcək. Bu iş \n"
-"tehlükəli ola bilər. Aşina deyil isəniz qurulumdan çıxın və \"Windows\" \n"
-"altında \"Scandisk\" (lazım gələrsə \"defrag\" da) proqramını çalışdırın. "
-"Ardından quruluma \n"
-"davam edin. Verilərinizin yedəyini almağı da unutmayın!"
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Hansı sektora daşımaq istəyirsiniz?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "bölmə %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT böyüklüyü dəyişdirilməsi bacarılmadı: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Bütün diski sil"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "\"Windows\"u sil"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sizin birdən çox diskiniz var, linux qurmaq üçün hansını istifadə "
-"edəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"%s bölüməsinin böyüklüyü dəyişdirildikdən sonra bu bölmədəki bütün "
-"mə'lumatlar silinəcəkdir"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Hazırkı disk bölmələndirməsi"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Fdisk istifadÉ™ et"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"İndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
-"İşinizi bitirdiyinizdə `w' ilə qeyd etməyi unutmayın"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Heç Windows disk bölməniz yoxdur!"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX bölmə sehirbazı bu yolu tapdı:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölmə cədvəli növü: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Şəbəkə fəallaşdırılır"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Bir xəta oldu, fəqət necə düzəldiləcəyini bilmirəm.\n"
-"Davam edin, riski sizÉ™ aitdir!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s bağlama nöqtəsini çoxalt"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Bəzi paketlər doğru olaraq qurulumu bitirmədi.\n"
-"cdrom sürücünüz ya da cdromunuz düzgün işləmir.\n"
-"�vvəldən Linuks qurulu bir sistemdə \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
-"istifadə edərək Cd-Rom'u yoxlayın.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s Sisteminə Xoşgəlmişsiniz"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Disket sürücü yoxdur"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Başlanğıc addımı `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sizin sisteminizin qaynaqları çatışmır. Qurulum ərzində problem yaşaya "
-"bilərsiniz\n"
-"Bu baş verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun üçün "
-"dəCDROMdan başlatdığınız zaman,\n"
-" 'F1'ə basın və 'text' yazaraq enter'ə basın."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Qurulum Sinifi"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Xahiş edirik aşağıdakı qurulum siniflərindən birisini seçiniz:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Seçdiyiniz paket qruplarının ümumi böyüklüyü təximən %d MBdır.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Bu böyüklükdən daha azını yükləmək istəsəniz,\n"
-"qurmaq istədiyiniz paket faizini seçin.\n"
-"100%%'i seçərsəniz bütün paketlər qurulacaqdır."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sabit diskinizdə bu paketlərin sadəcə olaraq %d%%'sini quracaq qədər yer "
-"var.\n"
-"Bundan daha azını qurmaq istəsəniz,\n"
-"daha az bir faiz sadəcə ən vacib paketləri ;\n"
-"%d%% isə qurula biləcək bütün paketləri quracaqdır."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sonrakı addımda daha geniş bir seçki qabağınıza gələcəkdir."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Qurulacaq paketlərin faizi"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Fərdi paket seçkisi"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ümumi böyüklük: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Xətalı paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ad: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Buraxılış: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Böyüklüyü: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "�həmiyyət: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Bu paketi seçə bilməzsiniz, çünki qurmaq üçün yer çatmır."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Aşağıdakı paketlər qurulacaqdır"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Aşağıdakı paketlər sistemdən silinəcəklər"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu lazımlı bir paketdir, sistemdən çıxardıla bilməz"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuşdur."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi sistemdən çıxarda bilməzsiniz. Yenilənməlidir"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Avtomatik seçili paketləri göstər"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Qurulum"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "DisketÉ™ qeyd et"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Qurulumdan çıx"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Qurulur"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Təxmini olaraq hesaplanır"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Qalan müddət"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi qurulur"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Qəbul Et"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rədd Et"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Romu dəyişdirin!\n"
-"\n"
-"\"%s\" adlı Cd-Romu sürücünüzə taxın və OLDU'ya basın.\n"
-"�gər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq üçün İMTİNA ET'ə basın."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Yenə də davam edək?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Paketləri istərkən bir xəta oldu:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Paketlər qurulurkən bir xəta oldu:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a şəbəkə. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Bir xəta oldu"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisenziya sözləşməsi"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linuks-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linuks-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linuks-Mandrake sites  which are prohibited or restricted in "
-"some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linuks-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Bütün mövcud klaviaturaların siyahısı"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hansı qurulum sinifini istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Qurulum/Güncəlləmə"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Bu bir qurulum mu, yoxsa güncəlləməmidir?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Tövsiyə edilən"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Usta"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Güncəlləmə"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Siçan Qapısı"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Düymə emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Düymə 2 emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Düymə 3 emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar qurulur..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE qapıları qurulur"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "uyğun bölmə tapılmadı"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Bağlama nöqtələri üçün bölmələr daranır"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Bağlama nöqtələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xarab olmuş bolmələri düzəltməyə çalışacam.\n"
-"Amma bütün mə'lumatlar itəcəkdir.\n"
-"Başqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını "
-"passivləşdirməkdir.\n"
-"(xəta %s)\n"
-"\n"
-"Bütün bölmələri itirmək istəyirsiniz?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake bölmə cədvəlini oxumağı bacara bilmədi.\n"
-"Özünüz davam edə bilərsiniz."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Kök (root) Bölməsi"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Sisteminizin kök (/) bölməsi hansıdır?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölmə cəvəlindəki dəyişikliklərin daxil olması üçün kompüterinizi yenidən "
-"başlatmalısınız."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Xətalı bloklar sınansınmı?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Bölmələr şəkilləndirilir"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s faylı yaradılır və şəkilləndirilir"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Qurulumu bitirmək üçün lazımi sahə yoxdur, xahiş edirik əlavə edin"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Mövcud olan paketlər axtarılır."
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Güncəllənəcək paketlar tapılır"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sisteminizdə qurulum ya da güncəlləmə üçün lazımi boş yer yoxdur(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Hamısı (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "�n az (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Tövsiyə edilən (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "DisketÉ™ qeyd et"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Seçili böyüklük var olandan daha böyükdür"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Aşağıdakı siyahıdakı bütün CD'lərə sahib isəniz, OLDU'ya basın.\n"
-"CD'lərin heç birinə sahib deyilsəniz, İMTİNA ET'ə basın.\n"
-"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
-"basın."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" adlı Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Qurulum hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketi qurulur\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"İndi şifrləmə üçün istifadə ediləcək tə'minatı endirə bilərsiniz.\n"
-"DİQQ�T:\n"
-"\n"
-"Bu tə'minata bə'zi fərqli ümumi ehtiyaclardan və müxtəlif\n"
-"mühakəmə haqlarından ötrü, bu tə'minatın son istifadəçisi, qanunların ona "
-"bu\n"
-"tə'minatı internetdən endirmə və saxlama haqqını verdiyindən əmin "
-"olmalıdır.\n"
-"\n"
-"�lavə olaraq, müşdəri va/və ya son istifadəçi xüsusilə, yerləşdiyi mühakəmə "
-"yerinin\n"
-"qanunlarını çeynəmədiyindən əmin olmalıdır. Müşdəri və/və ya son istifadəçi\n"
-"qanunların əmr etdiyi şərtləri pozduğu zaman ciddi cəzalara\n"
-"mə'ruz qalacaqdır.\n"
-"\n"
-"Xüsusi ya da dolaylı zərərlərə (gəlir azalması, işin pozulması, ticari "
-"mÉ™'lumat\n"
-"itkisi və digər maddi itkilər) yol açan heç bir hadisədə nə Mandrakesoft, nə "
-"dÉ™ \n"
-"istehsalatçıları və/va ya qaynaq vericiləri məs'ul tutulmazlar. Bu "
-"tə'minatı\n"
-"internetden endirirkən son istifadəçi bu sözləşməyi qəbul etdiyini \n"
-"bəyan etmiş sayılır.\n"
-"\n"
-"\n"
-"Bu sözləşməylə əlaqədər hər cür sual üçün xahiş edirik\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA\n"
-"ünvanına yazınız."
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "�ks ünvanına bağlantı qurulur"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almaq üçün bir əks ünvanı seçin"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "�ks ünvanına bağlantı qurulur"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Sisteminiz hansı məqsədlə istifadə ediləcək?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS Verici"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Çap Edicisiz"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "BaÅŸqa var?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Mündəricat"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Siçan"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vaxt Dilimi"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Çap Edici"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartı"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Səs kartı"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartı"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "NIS istifadÉ™ et"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Yerli Çap Edici"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root parolunu qur"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Parolsuz"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Tanıtma"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Tanıtma"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Verici"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS sahəsi"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Verici"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lüzüm\n"
-"olmadan açılmasına imkan verər. �gə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanız,\n"
-"ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaişləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyə disket "
-"yerləşdirin\n"
-"və \"OLDU\" basın."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "İlk disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "İkinci disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Nəzərə Alma"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lüzüm\n"
-"olmadan açılmasına imkan verər. �gə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanız,\n"
-"ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaişləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyədisklet "
-"yerləşdirin\n"
-"və \"OLDU\" basın.\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Bağışlayın, disket sürücü yoxdur"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Açılış disketi yaratmaq üçün istifadə ediləcək disket sürücüyü seçin"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Açılış disketi yaradılır"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Açılış yükləyici hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot qurulumunda xata, \n"
-"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Sistem yükləyicini qur"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Açılış yükləyicisi qurulumu iflas etdi. Xəta:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Siz Open Fİrmware açılış avadanlığınızı açılış yükləyicisini\n"
-"fəallaşdırmaq üçün dəyişdirməli ola bilərsiniz. �mr-Seçənək-O-F düymələrini\n"
-" yenidən başlarkən basın və bunları girin:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Sonra da bunları yazın: shut-down\n"
-"Bir sonrakı başlanğıcda açılış yükləyicisi sətirini görməlisiniz."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bə'zi bölmələr bitdi.\n"
-"\n"
-"Həqiqətən də çıxmaq istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-#, fuzzy
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Təbriklər, quruluş bitdi.\n"
-"Cdrom və disketi çıxartdıqtan sonra Enter'ə basaraq kompüterinizi \n"
-"yenidən başladın. Linuks Mandrake'nin bu buraxılışındakı yamaqlar haqqında \n"
-"mə'lumat almaq üçün http://www.mandrakelinux.com ünvanından Errata'ya "
-"baxın.\n"
-"Sisteminizin qurğuları haqqında daha geniş bilgiyi Linuks Mandrake \n"
-"İstifadəçi Kitabcığında tapa bilərsiniz."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Avtomatik qurulum disketi hazırlanması seçilərsə,\n"
-"bütün sabit disk mə'lumatı daxil ediləcəkdir!!\n"
-"(yə'ni başqa sistemi də qura bilmək üçün).\n"
-"\n"
-"Bu qurulumu takrar etmək istəyə bilərsiniz axı.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Avtomatlaşdırılmış"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Təkrarla"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrake Qurulumu %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> irəli/geri  |  <Boşluq> işarətlə  |  <F12> sonrakı ekran"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu əksikdir"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Monitorunuzu seçin"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "�traflı"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Xahiş edirik gözləyin"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "MÉ™'lumat"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ağacı Aç"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Ağacı Qapat"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Otaq və grup sıralaması arasında gəz"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Xətalı tərcih, təkrar sınayın\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Seçənəklər: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Çex dili (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Almanca"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Ä°spanca"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "FincÉ™"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Fransızca"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveçcə"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polyakca"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusca"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "İsveçcə"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "İngiliz (UK) klaviaturası"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Amerikan (US) klaviaturası"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Farsca"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Ermenicə (köhnə) "
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Ermenicə (yazı maşını)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "ErmenicÉ™ (fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azərbaycanca (latın)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belçika dili"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "ErmenicÉ™ (fonetik)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulqarca"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilya dili (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusca"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "İsveçcə (Alman sırası)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "İsveçcə (Fransız sırası)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Çex dili (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Almanca (ölü düymələr olmasın)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danimarka dili"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveçcə)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniya dili"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gürcü dili (\"Rus\" sırası)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gürcü dili (\"Latın\" sırası)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Yunanca"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Macarca"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Xırvatca"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Ä°srail"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Ä°srail (Fonetik)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Farsca"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Ä°zlandiya dili"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Ä°talyanca"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Yaponca 106 düyməli"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreya klaviaturası"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latın Amerika dili"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvaniya dili AZERTY (köhnə)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY (yeni)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Yeri"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedoniya dili"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandiya dili"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polyakca (QWERTY sırası)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polyakca (QWERTZ sırası)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portuqalca"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Fransızca (Kanada/Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "SlovencÉ™"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakca (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azərbaycanca (kiril)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Cədvəl"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai klaviatura"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai klaviatura"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkcə (ənənəvi \"F\" klaviatura)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkcə (müasir \"Q\" klaviatura)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klaviaturası (beynəlmiləl)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vyetnam dili \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (latın/kiril)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Dairəvi bağlama %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Məntiqi ciltləri birinci olaraq sil\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Siçan"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sıravi PS2 Çərxli Siçan"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 düymə"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Sıravi 2 Düyməli Siçan"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Ãœmumi"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Çərx"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Sıravi 3 Düyməli Siçan"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serial ya da köhnə C7 növü)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 düyməli"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 düyməli"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "heç biri"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Siçansızs"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Siçanınızı işə salmaq üçün,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "T�K�Rİ OYNADIN!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Qurtar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sonrakı ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- �vvəlki"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "DoÄŸrudur?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ä°nternetÉ™ baÄŸlan"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ADSL ilə internetə bağlanmanın ən yaxşı yolu pppoe'dur.\n"
-"Bəzi bağlantılar pptp istifadə edir, çox azı isə dhcp işlədir.\n"
-"Bilmirsiniz isə 'pppop istifadə et'i seçin"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp istifadÉ™ et"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe istifadÉ™ et"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptpe istifadÉ™ et"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hansı dhcp alıcısını istifadə edəcəksiniz?\n"
-"�sası dhcpcd dir"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Sisteminizdə heç bir eternet şəbəkə adapteri tapıla bilmədi.\n"
-"Bu bağlantı şəklini qura bilmərəm."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Şəbəkə ara üzünü seçin"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "şəbəkə kartı tapılmadı"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Şəbəkə Qurğuları"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Xahiş edirik kompüterinizın adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"�gə şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ev sahibi adı"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Şəbəkə Quraşdırılması Sehirbazı"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Xarici ISDN kart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Daxili ISDN kart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN bağlantınızın növü nədir?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN quraşdırılması"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"İnternet xidmət vericinizi seçin.\n"
-"Siyahıda deyilsə Siyahıda deyil'i seçin."
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Açılış Protokolu"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Avropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Bütün dünya"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Bütün dünya \n"
-" D-Channel'lə xaric (kiralıq xətlər)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Hansı protokolu istifadə etmək istəyirsiniz?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Hansı növ kartınız var?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Bilmirəm"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ISA kartınız var isə sonrakı ekrandakı qiymətlər doğru olmalıdır.\n"
-"\n"
-"PCMCIA kartınız var isə kartınızın irq və ya io'sunu bilməlisiniz.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Dayandır"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Davam et"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Hansısı sizin ISDN kartınızdır?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI kart tapdım, amma növünü bilmirəm. Xahiş edirik sonrakı ekrandakı "
-"kartlardan birini seçin."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heç bir ISDN PCI kart tapılmaı. Sonrakı ekrandakılardan seçin."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Çevirməli şəbəkə seçənəkləri"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Bağlantı adı"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefon nömrəsi"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Giriş adı"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript əsaslı"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal əsaslı"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Sahə(domain) adı"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "İkinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı yenidən quraşdıra bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Artıq İnternetə bağlısınız."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"İstəsəniz İnternetə bağlana bilərsiniz ya da yeniden quraşdıra bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Hələ İnternetə bağlı deyilsiniz."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "BaÄŸlan"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Bağlantını kəs"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Şəbəkəni qur"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "İnternet bağlantısı & quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Şəbəkədən quraşdırması apardığınız üçün şəbəkəniz artıq qurulmuş olmalıdır.\n"
-"Şəbəkə/İnternet bağlantınızı yenidən quraşdırmaq üçün Oldu'ya yoxsa Ləğv "
-"et'ə basın.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Şəbəkə Quraşdırma Sehirbazına Xoç Gəldiniz\n"
-"\n"
-"İnternet/Şəbəkə qurğularınızı edəcəyik.\n"
-"Avtomatik təsbit istəmirsiniz isə işarəti qaldırın.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Qurulacaq profili seçin"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Avtomatik təsbit işlət"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Avadanlıqlar tanınır..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normal modem təsbiti"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s qapısında tapıldı"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN Bağlantısı"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s tapıldı"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s ara üzündə tapıldı"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabel bağlantısı"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabel bağlantısı"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "eternet kart tapıldı"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Şəbəkənin yenidən başladılması sırasında xəta oldu: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Təbrik edirik, internet və şəbəkə quraşdırılması qurtardı.\n"
-"\n"
-"Qurğular indi sisteminizə əlavə ediləcək.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
-"verici adı xəsarətləri meydana gələ bilər."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"DİQQ�T: Bu avadanlıq daha əvvəl İntenetə bağlanmaq üçün qurulmuşdur.\n"
-"Avadanlığın qurğularını dəyişdirmaək istəmirsiniz isə,\n"
-"OLDU ya basın.\n"
-"Aşağıdakı girişləri düzəltməniz özünü əvvəlki qurğuların üstünə yazacaqdır."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "Xahiş edirik bu kompüter üçün IP qurğularını girin"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s şəbəkə avadanlığı qurulur"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (sürücü %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ünvanı"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Avtomatlaşdırılmış IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Xahiş edirik kompüterinizn adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"�gər şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS verici"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Keçit avadanlığı"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP vəkil verici"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP vəkil verici"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Vəkil verici http://... şəklində olmalıdır."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Vəkil verici ftp://... olmalıdır."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "İnternete girişi indi sınamaq istəyirsiniz?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Bağlantınız sınanır..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "İnternetə artıq bağlısınız"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Təhlükəsizlik səbəbi ilə indi bağlantı qopacaqdır."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sisteminiz İnternetə bağlı deyil.\n"
-"Bağlantını yenidən quraşdırın"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Bağlantı quraşdırılması"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Xahiş edirik aşağıdakıları doldurun ya da seçin"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kart IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kart mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kart IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kart IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kart IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Sizin şəxsi telefon nömrəniz"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "İnternet xidmət vericinizin adı (məsələn azeronline.com)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "İXM telefon nömrəsi"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns xidmətcisi 1 (arzuya görə)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns xidmətcisi 2 (arzuya görə)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Klaviaturanızı seçin"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Yığma modu"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Bağlantı növü:"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Bağlantı növü:"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Hesab Girişi (istifadəçi adı)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Hesap Parolu"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "baÄŸlama iflas etdi: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Bu platformda genişlədilmiş bölmələr dəstəklənmir"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Bölmə cədvəlinizdə bir boşluq var, amma o da işlədilə bilməz.\n"
-"Bu boşluğu, birinci bölmənizi en yaxınındakı genişlədilmiş bölməyə "
-"daşıyaraq\n"
-"məsələni həll edə bilərsiniz."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s faylından qurtarılışda xəta: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s faylına yazarkən xəta oldu"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Bə'zən sürücünüzdə pis şeylər ola bilər.\n"
-"Datanın bütövlüyü yoxlaması bacarılmadı. \n"
-"Bu o demekdir ki diskə yazılan hər şey təsadüfi olacaqdır"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "alınmalı"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vacib"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "əla"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "gözəl"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "bəlkə"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Uzaq çap edici vericisi(lpd)"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Şəbəkə Çap Edicisi (soket) "
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Yerli Çap Edici"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "%s faylına yazarkən xəta oldu"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS verici IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (�sas)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Çap ediciniz nə şəkildə bağlıdır?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Uzaq CUPS vericiləri üçün heç bir quraşdırmağa lüzüm yoxdur\n"
-"Buradakı hər çap edici avtomatik tapılacaqdır.\n"
-"Olmazsa \"Uzaq CUPS vericisi\" ni seçin."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS verici IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Qapı"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Avadanlıqlar tanınır..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Qapıları sına"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Avtomatik təsbit işlət"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s tapıldı"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Quraşdırma"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Uzaqdakı bir lpd çap edici növbəsini istifadə etmək üçün, \n"
-"çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n"
-"adınını verməlisiniz."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Uzaqdakı ev sahibi adı"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Bir SMB çap edicidən yekun almaq üçün, SMB kompüter adı, çap edici "
-"vericisinin\n"
-"IP ünvanı, çap edicinin paylaşdırma adı, işləmə grupu, istifadəçi adı və \n"
-"parol verilməlidir."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB verici adı"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB verici IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Paylaşdırma adı"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Ä°ÅŸ qrupu"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Çap Edici Qurğuları"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare çap edicidən yekun almaq üçün, NetWare vericisinin adı və çap "
-"edici \n"
-"növbəsi adı ilə istifadəçi adı va parolu verilməlidir."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Çap Edici Növbə Adı"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Soket Çap Edici Qurğuları"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Soket çap edicidən yekun almaq üçün, çap edicinin ev sahibi  adını ve "
-"mümkünsə, qapısının nömrəsini verməlisiniz."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Çap edici adı"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Ä°zah"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Yeri"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "DoÄŸrudur?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Çap Edici Bağlantısı"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Nə cür bir çap ediciniz var?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Çap edicini sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Qapıları sına"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Bəli, hər iki sınaq səhifəsini də çap et"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Çap Edici"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standart"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Çap vəziyyəti:\n"
-"%s\n"
-"\n"
-"Düz mü işləyir?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Düz mü işləyir?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Qapat"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Çap edici seçənəkləri"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Bağlantınız başladılır..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Şəbəkəni qur"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Şəbəkə Qurğuları"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Yüksək"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Şübhəci"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Çap Edicini Qur"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Çap edici seçənəkləri"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Çap Edicini Qur"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Bir çap edici qurmaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Çap Edici"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aşağıda yazıçıdakı növbələr verilmişdir.\n"
-"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aşağıda yazıçıdakı növbələr verilmişdir.\n"
-"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Şəbəkəni qur"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normal Mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Çap Edici Bağlantısı"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "CUPS sürücü datası oxunur..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Qapı"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Vəkil verici http://... şəklində olmalıdır."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Vəkil verici ftp://... olmalıdır."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Avtomatik GiriÅŸ"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parol"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Parolsuz"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Şəkilləndirilmiş RAID md%d-yə disk bölməsi əlavə edilə bilinmədi"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s faylına yazıla bilinmədi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid iflas etdi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid iflas etdi (raidtools əksik ola bilər mi?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d səviyyə RAID üçün çatmayan sayda disk bölməsi\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA səs sistemini (Advanced Linux Sound Architecture) başlat"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anakron, periodik əmr zamanlayıcısı"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd batareya vəziyyətini izləmək üçün və syslog aracılığıyla bunun qeydini "
-"tutmaq üçün istifadə edilir.\n"
-"Ayrıca batareya azaldığında sistemi qapatmaq üçün də istifadə edilir."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at əmri, zamanlanan əmrləri işləmələri lazım gələn vaxtda işlədir.\n"
-"Sistem yükü lazımi qədər alçaq olduğunda yığma əmrləri işlədilir."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, istifadəçilərə xüsusi əmrləri periodik olaraq işə sala bilən\n"
-"standart bir UNIX proqramıdır. vixie cron, standart cron'a əlavə edilmiş bir "
-"çox\n"
-"yeni xüsusiyyət daxildir."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
-"edər.\n"
-"Ayrıca konsolda siçanla kəsmə və yapışdırma əməliyyatlarına da imkan verər.\n"
-"Konsolda pop-up menyu dəstəyi verər."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake texniki tə'minat sınağı aparar və onları bir ön quraşdırmadan "
-"keçirər."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi üçün "
-"istifadÉ™ edilir."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (qısaca inetd ) bir çox \n"
-"başqa internet xidmətcisini lazım gəldiyi zaman işa salır. İçində telnet, "
-"ftp, rsh və rlogin kimi proqramın olduğu xidmətləri işə salmaqla məs'uldur.\n"
-"inetd-ni sistemden çıxarmaq, onun məs'ul olduğu bütün xidmətləri\n"
-"rədd etmək mənasını daşıyır."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Linuks 2.2 seriyası çəkirdəklərində firewall\n"
-"qurmaq üçün üçün paket süzülməsini başlat."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura düzülüşünü yüklər.\n"
-"Hansı klaviatura düzülüşü istifadə ediləcəyi kbdconfig ilə seçilir.\n"
-"Bu, mandrake qurulan bir çox kompüterdə fəal buraxılmalıdır."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h üçün \n"
-"/boot-da avtomatik çəkirdək başlığı yaradılması."
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Texniki avadanlığın açılışda avtomatik təsbiti və qurulması."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf sistem qurğularınızı idarə edən proqramları\n"
-"müxtəlif vəzifələri açılışda icra edər."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd, lpr'nin düzgün olaraq işləməsi üçün lazımi çap edici vasitəsidir.\n"
-"lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən "
-"vericidir."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linuks Virtual Verici, yüksək qabiliyyətli vericilər qurmaq üçün işlədilir."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) verici adlarını IP ünvanlarına çevirən\n"
-"Sahə Adı Vericisidir(DNS)."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Bütün Şəbəkə Fayl Sistemlərini (NFS), SMB (Lan Manager/Windows), və \n"
-"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Açılış sırasında başlamaq üçün qurulmuş bütün şəbəkə axtar üzlərini "
-"fəallaşdırır ya da qapatır."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir "
-"protokoldur.\n"
-"Bu xidmət, /etc/exports faylında qurğuları olan NFS vericisinin\n"
-"istifadəsinə imkan verər."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir \n"
-"protokoldur. Bu xidmət NFS fayl qıfılı istifadəsinə imkan verər."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Açılışda XFree və konsolda numlock düyməsini\n"
-"avtomatik olaraq aç."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w və uyğun Windows çap edicilərini dəstəklə."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA dəstəyi, laptoplarda eternet və modem kimi avadanlıqların "
-"dəstəklənməsinə imkan verər.\n"
-"Qurulmadığı vaxtda açılışda işləməz, işləməsinə ehtiyac olmayan\n"
-"kompüterlərdə qurulu olması problem yaratmaz."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper, NFS ve NIS kimi protokollar tərəfindən istifadə edilən RPC \n"
-"bağlantılarını təşkilatlandırır. Portmap vericisi RPC mexanizmini işlədən\n"
-"protokollarla xidmət edən kompüterlərdə qurulmalıdır və işlədilməlidir."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Posfix, elektronik məktubların bir kompüterdən digərinə yollayan \n"
-"Elektronik Məktub Yollama Vasitəsidir."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Yüksək keyfiyyət təsadüfi rəqəm istehsal edən sistem entropi hovuzunun \n"
-"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed vasitəsi avtomatik IP router cədvəlinin RIP protokolu tərəfindən\n"
-"yenilənməsinə imkan verər. RIP əsasən kiçik şəbəkələrdə istifadə edilir, "
-"daha böyük\n"
-"şəbəkələrdə daha qarışıq routing protokollarına ehtiyacı vardır."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı hər hansı bir\n"
-"kompüter haqqındakı qabiliyyət ölçüləri ala bilmələrinə imkan verər."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı kompüterlərdə\n"
-"işləyən istifadəçiləri görməsinə imkan verər."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolu, uzaq istifadəçilərin, rwho vasitəsi işlədən bir kompüterdə\n"
-"olan bütün istifadəçiləri görmələrina imkan verər."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Kompüterinizdə səs sistemı başladın"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog, bir çox vasitənin ismarıclarını müxtəlif sistem qeydlərində\n"
-"tutmalarına imkan verər. Syslog'un hər zaman işləməsi\n"
-"yaxşı fikirdir."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "USB avadanlığınız üçün sürücüləri yükləyin."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X Font Vericisini açılışda işə salar (Bu, XFree icrası üçün məcburidir)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Açılışda avtomatik olaraq başlayacaq xidmətləri seçin"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Çap Edici"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Ä°nternet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistem modu"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Databeyz"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "avadanlıq"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "işləmir"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "dayandırılıb"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Xidmətlər və vasitələr"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Bu xidmət haqqında təəsüf ki,\n"
-"əlavə mə'lumat yoxdur."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Açılışda"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Hal:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Bütün dünya"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "İnternet imkanı"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedya - Qrafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Təcrübi"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "İdarə Mərkəzi"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB verici adı"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Oyunlar"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Usta"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "%s paketi qurulur"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Bölmə cədvəlini oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xəsərli hissələri düzəltməyə cəhd edəcəm"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Xəta"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Təbriklər!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Növbəni sil"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "\"Windows\"u sil"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Parolsuz"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Sabit disk seçkisi"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Çərx"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Çərx"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modul seçənəkləri:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Seçənəklər"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Disketdən geri çağır"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Digər"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Xüsusi"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Yardım"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- �vvəlki"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Hal:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Sonrakı ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Qurulacaq paketləri seçin"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Fayla qeyd et"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s qurulumu iflas etdi. Olan xəta:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "şəbəkə kartı tapılmadı"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Qurtardı"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Qurulum hazırlanır"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "məhdudlaşdır"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "məhdudlaşdır"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Bölmə şəkilləndirilməsi"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Bağlama nöqtəsi"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Ä°ÅŸ Yeri"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Dayandır"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Çap Edici"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Fayl seç"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Uzaq Çap Edici"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "İnit İsmarıcı"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Qurulumdan çıx"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi fəallaşdırıldı"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq fəallaşdırılmışdır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "passivləşdir"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "keç"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "yenidən quraşdır"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Vericilər bağlanır..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi bağlandı"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi passivləşdirildi"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq passivləşdirilmişdir.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "fəallaşdır"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Xidmətlər fəallaşdırılır..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi açıldı"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
-"Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
-"bağlantınızdan faydalana biləcəklər.\n"
-"\n"
-"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
-"ehtiyacınız var."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ara Üz %s (%s modulu işlədilir)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Ara üz %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Sisteminizdə şəbəkə kartı tapıla bilməyib.Avadanlığı quran vasitəni işə "
-"salın."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sistemnizdə bir dənə qurulmuş şəbəkə adapteri var:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerli Şəbəkə adapterinizi qurmaq üzərəyəm?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Sizi Yerli Şəbəkəyə bağlayacaq adapteri seçin"
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor qurulmayıb"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS verici IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s quğusunda dəyəsən bir LAN ünvan çaxışması tapıldı!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Diqqət! Var olan Firewall qurğusu tapıldı. Yükləmədən sonra bir az əl "
-"gəzdirə bilərsiniz."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Quraşdırılır..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skriptlə qurulur, proqram tə'minatı qurulur, xidmətlər başladılır..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi qurulurkən xəta oldu"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Hər şey quruldu.\n"
-"İndi isə İnternet bağlantınızı yerli şəbəkədəkı başqa kompüterlər ilə "
-"bölüşdürə bilərsiniz, bunun üçün isə avtomatik şəbəkə quraşdırılması (DHCP) "
-"işlədilir."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Quraşdırma artıq qurtarıbdır, amma fəaliyyəti dayandırılıb."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Quraşdırma artıq qurtarıbdır və fəaliyyətdədir."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "İnternet Bağlantısı Bölüşdürmə Quraşdırması aparılmayıb."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "İnternet bağlantısı bölüşdürülməsi quraşdırılması"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"İnternet Bağlantısı Bölüşdürmə vasitəsinə Xoş Gəldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"Quraşdırma sehirbazını açmaq üçün Quraşdıra tıqlayın."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Şəbəkə quraşdırılması (%d adapter)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profili sil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Silinəcək profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Yeni profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ev sahibi adı:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "İnternet imkanı"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Növ: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Keçit:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Ara üz"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Hal:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "İnternet keçişini Qur..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Sürücü"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Ara üz"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Hal:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Yerli Şəbəkəni Quraşdır..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Sehirbaz..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "�lavə Et"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Lütdən Gözləyin... Qurğular əlavə edilir"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Bağlandı"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Bağlı deyil"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "BaÄŸlan..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Bağlantını Kəs..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Qurulu ara üzünüz yoxdure.\n"
-"�vvəlcə onları  'Quraşdır'a basaraq qurun"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s Adapteri: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Açılış Protokolu"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Açılışda başladılır"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP alıcısı"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Fəal"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Fəal"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Heç İnternet bağlantınız yoxdur.\n"
-"�vvəlcə onları  'Quraşdır'a basaraq qurun"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "İnternet bağlantısı quraşdırılması"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "İnternet Bağlantısı Quraşdırılması"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Bağlantı növü:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrlər"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Keçit"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Eternet Kartı"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Alıcısı"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "İdarə Mərkəzi"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Fransızca (Kanada/Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Ä°zlandiya dili"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serial"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "istifadə qaydası: keyboarddrake [--expert] [klavatura]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cd-Romu dəyişdir"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Qurma Cd-Romunu sürücünüzə taxın və OLDUya basın.\n"
-"�gər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq üçün R�DD ETə basın."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Təkmilləşdirmə işi başlaya bilmir !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Təkcə bu gününkünü göstər"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fayl/_Yeni"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>Y"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fayl/_Aç"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fayl/_Qeyd Et"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fayl/_Fərqli Qeyd Et"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fayl/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Seçənəklər"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Seçənəklər/Sınaq"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Yardım"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Yardım/_Haqqında..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ismarıclar"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "sistem qeydi"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "axtar"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Qeydlərinizə baxan vasitə"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "QurÄŸular"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "oxşayır"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "amma oxşamır"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Fayl seç"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Təqvim"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Fayl məzmunu"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "xahiş edirik, gözləyin, fayl daranır: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache vÉ™ Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "avadanlıq"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Şəkilləndirilir"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Quraşdırma"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Fərqli qeyd et..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_USB avadanlığı tapılmadı\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "3 düymə emulasiyası"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Ekran kartınızı seçin"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Açılış avadanlığı"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewall quraşdırılması"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewall quraşdırılması"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Firewall qurğularını artıq qurtarmısınız.\n"
-"Qur-a tıqlayaraq firewall qurğuların silin ya da təkmilləşdirin."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Qur-a tıqlayaraq standart firewall qurğularını aparın."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "İşlətdiyiniz dili seçin"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Quruluş sinifini seçin"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Sabit disk seçkisi"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Siçan qurğuları"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klaviaturanızı seçin"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Təhlükəsizlik"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Bölmə şəkilləndirilməsi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Qurulacaq paketləri seçin"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistemi qur"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Şəbəkəni qur"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Xidmətləri qur"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Sistem yükləyicini qur"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Açılış disketi yarat"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X qur"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Sistemi qur"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Qurulumdan çıx"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall configurator\n"
-"\n"
-"Bu, Linuks Mandrake sisteminiz üçün şəxsi bir firewall quraşdıracaqdır.\n"
-"Daha güclü və e'tibarlı sistem üçün xahiş edirik xüsusi MandrakeSecurity "
-"Firewall\n"
-"buraxılışını tədqiq edin."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"İndi isə internetə bağlanırkən istifadə etməyi arzuladığınız xidmətləri\n"
-"soruşacağıq. Bu suallara xahiş edirik diqqətlə cavab verin, çünkü "
-"kompüterinizin \n"
-"təhlükəsizliyi çox vacib məsələdir.\n"
-"\n"
-"Xahiş edirik, bu xidmətlərdən istifadə etmədiklərinizə yaxşı qərar verin ki, "
-"firewall\n"
-"onu bağlasın. Sonradan bu qurğuları özünüz proqramı yenidən işə salaraq "
-"dəyişdirə bilərsiniz.!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Sisteminizdə bütün İnternetə göstərmək istədiyiniz veb vericisi "
-"işlədirsiniz? \n"
-"Təkcə bu kompüterin görəcəyi bir veb vericisi olacaqsa burada YOX cavasbı "
-"verə bilərsiniz.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Bu kompüterdə ad vericisi işlədirsiniz? �gər internetə bağlanırkən bir IP "
-"ünvanı və\n"
-"nahiyə mə'lumatı almırsınızsa YOX cavabı verin.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Gələn E'tibarlı Qabıq (ssh) bağlantılarına icazə vermək istəyiriniz? Bu, "
-"bir\n"
-"cür telnet əvəzidir. İndi telnet işlədirsinizsə onda \"ssh\"yə "
-"keçməlisiniz. \n"
-"Telnet kodlama işlətmir, ona görə dəbə'zi həkerlər parolunuzu oğurlaya "
-"bilər. \n"
-"ssh bunlara icazə verməz."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Gələn telnet bağlantılarına icazə verim?\n"
-"Bu çox e'tibarsızdır. Bunu sizə əvvəlki ekranda söylədik. Buna \n"
-"yox cavabı verməyinizi tövsiyyə edirik. Yerinə ssh işlədin.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"İnternetdən yetişilə bilən bir FTP vericisi işlədirsiniz? �gər "
-"işlədirsinizsə,\n"
-"təkcə Anonim köçürmələr üçün olmasını tövsiyyə edərik. FTP ilə göndərilən\n"
-"parollar həkerlər tərəfindən oğurlana bilər. FTP parolları kodlaya bilmir "
-"axı.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Burada məktub vericisi işlədirsiniz? �gər ismarıclarınızı pine\n"
-"mutt və ya başqa mətn əsaslı məktub alıcısından göndərirsinizsə,\n"
-"demək ki, işlədirsiniz.  Yoxsa firewall bunu bağlamalıdır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Burada POP və ya IMAP vericisi işlədirsiniz? Bu isə\n"
-"kompüterdə veb əsaslı olmayan məktub hesabları qurmaq üçün lazımdır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Dəyəsən 2.2 çəkirdək işlədirsiniz. �gər kompüterinizin\n"
-"IPsi başqa bir kompüter tərəfindən dinamik olaraq verilirsə,\n"
-"onda buna icazə vermək olar. Beledir?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Kompüterinizin vaxtı başqa bir kompüterlə sinxronlaşdırır?\n"
-"Bu, daha çox orta və geniş Unix/Linuks şirkətləri tərəfindən işlədilir.\n"
-"�gər bir şirkətin bir parçası deyilsinizsə, demək ki, işlətmirsiniz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Qurulum qurtarıldı. Dəyişiklikləri diskə yazım?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s açıla bilmir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Yazmaq üçün %s açıla bilmir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Firewall quraşdırılması"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Verici, Veb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Şəbəkə Kompüteri (alıcı)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS vericisi, SMB vericisi, SSH vericisi, Vəkil Verici"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ä°ÅŸ Yeri"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome iş stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot və ya Visorunuz üçün vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Masa üstü"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Verici, Firewall/Ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeyn Ad bə Şəbəkə Mə'lumat Vericisi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"İdarə proqramları: kəlmə işləyənlər (kword, abiword), hesablayıcılar və pdf "
-"göstəriciləri, vs."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-"Səs ilə əlaqədər vasitələr: mp3 və ya midi çalğıçılar, qarışdırıçılar, vs."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linuks və pulsuz proqram tə'minatıları Kitablar və Howtoları"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE iş stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedya - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Məktub, xəbərlər, fayl daşınması, chat vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databeyz"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL vÉ™ ya MySQL databeyz vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Kompüter qurğularını asandlaşdıran vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedya - Səs"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Sənədlər"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsol Vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix məktub vericisi, Inn xəbər vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "İnternet stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedya stansiyası"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Başqa qrafiki ara üzlər (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE, əsas qrafiki ara üz və yardımçi proqramlar kolleksiyası"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Qrafiki Ara Ãœz"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache vÉ™ Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD yazmaq və yandırmaq proqramları"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "İş Yeri Stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Verici"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, IceWM, Windows Maker, Enlightement, Fvwm, vs."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Qrafika proqramları, məsələn The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C və C++ inkişaf kitabxanaları, proqramları və daxil ediləcək fayllar"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Şəbəkə Kompüteri vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Verici, ePoçt/Groupware/Xəbərlər"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Oyun stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video çalğıçıları və editorları"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedya - Qrafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Məzəli proqramlar: arkad, lövhə oyunları, strategiya, vs"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Elektronik məktub və xəbər oxuyucusu (pine, mutt, tin..) və Web səyyahları"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arxivləmə, emulyatorlar, izləmə"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Şəxsi Maliyyə"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"İstifadəçi dostu proqram və masa üstü ilə bərabər qrafiki ara üz vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "SSH daxil bir çox protokolların alıcıları"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "İnternet keçişı"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Səs və video çalınması/düzəliş proqramları"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Başqa qrafiki ara üzlər"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorlar, rəflər, fayl vasitələri, terminallar"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Şəxsi maliyyə idarəçiləri, məsələn gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Şəxsi Mə'lumat İdarəçisi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedya - CD Yandırma"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Elmi iş stansiyası"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Dayandır"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Qurtardı"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "�sas istifadəçini seçin:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Uzaq Çap Edici"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "İndi %s moduluna parametrlər girə bilərsiniz."
-
-#~ msgid "mount failed"
-#~ msgstr "baÄŸlama iflas etdi"
-
-#~ msgid "Low"
-#~ msgstr "Alçaq"
-
-#~ msgid "Medium"
-#~ msgstr "Orta"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Bu təhlükəsizlik səviyyəsi üçün əlavə olaraq artırılmış təhlükəsizlik "
-#~ "xəbərdarlığı və \n"
-#~ "yoxlama var."
-
-#~ msgid "Boot mode"
-#~ msgstr "Açılış modu"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Usta"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linuks zamanı GMT-yə (Greenwich Mean Time) görə qurğular və olduğunuz \n"
-#~ "yerdəki zamana görə lazımi dəyişiklikləri edər."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "İnternetə bağlantı"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "İnternetə bağlantını kəs"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Şəbəkə (İnternet/LAN) bağlantınızı quraşdırın"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Hansı diskə daşımaq istəyirsiniz?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "MÉ™'lumat"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome iş stansiyası"
-
-#~ msgid "authentification"
-#~ msgstr "tanıtma"
-
-#~ msgid "user"
-#~ msgstr "istifadəçi"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi "
-#~ "üçün istifadə edilir."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) verici adlarını IP ünvanlarına çevirən\n"
-#~ "Sahə Adı Vericisidir(DNS)."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Çıx"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#~ msgid "Active"
-#~ msgstr "Fəal"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Xeyr"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "\"%s\" modelində bir çap edici tapıldı:"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Yerli Çap Edici Avadanlığı"
-
-#~ msgid "Printer Device"
-#~ msgstr "Çap Edici Avadanlığı"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Uzaq CUPS vericisi"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Uzaq CUPS vericisi"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linuks"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistem modu"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Digər"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Klaviatura quruluşunu seçiniz."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Növ: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Xətalı yedəkləmə faylı"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "X qur"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Çap Edici Avadanlığı"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Ləğv et"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Oldu"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Qapat"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Bağlantınız başladılır..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Bağlantınız kəsilir..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Bağlantı kəsildi. Buna əllə kökdə\n"
-#~ "/etc/sysconfig/şəbəkə-scripts/net_cnx_down\n"
-#~ "əmrini icra edərək nail ola bilərsiniz."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sistem indi bağlantısını kəsib."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#~ msgid "Total size: "
-#~ msgstr "Hamısı: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Xahiş edirik gözləyin, "
-
-#~ msgid "Total time "
-#~ msgstr "Ümumi müddət"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "X11 qurğuları üçün mövcud qurğulardan istifadə edək?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Çap ediciniz hansı avadanlığa bağlıdır? \n"
-#~ "(/dev/lp0, LPT1'nin qarşılığıdır)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "Diqqət, şəbəkə adapteriniz onsuz da qurulub. Yenidən quracam."
-
-#~ msgid "New"
-#~ msgstr "Yeni"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Uzaqdakı növbə adı"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Qarışıqlıq (%s), daha aydın yazın\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (əsas %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Seçkiniz (əsas %s, yoxsa `none' yazın) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin  oxunmaq üçün açıla bilmir: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Razısınız?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Şəbəkə avadanlığını yenidən başlatmalıyam:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "%s avadanlığını yenidən başladacam. Razısınız?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Başqa bir şəkildə seçilməmiş isə, ümumiyyətlə bu seçki \"/dev/hda\" \n"
-#~ "(Birinci ali IDE disk) ya da \"/dev/sda\" (birinci SCSI disk)\n"
-#~ "olacaqdır."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Bağlantı növü:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "�sas istifadəçini seçin:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Siçanınızı buradan sınayın."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Qurulma və sistem istifadəsi üçün bir dil seçin."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Davam edə bilmək üçün yuxarıdakı lisenziyanın maddələrini qəbul "
-#~ "etməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xahiş edirik, maddələrlə razı isəniz \"Qəbul\" düyməsinə basın.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xahiş edirik, maddələrlə razı deyilsəniz ,\"Rədd\" düyməsinə basın\n"
-#~ "Yükləmə indiki qurğularınız dəyişdirilmədən bitiriləcək."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Yuxarıdakı siyahıdan klaviaturanıza uyöun gələn düzülüşü seçiniz"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "�gər yükləmədən sonra işlətmək üçün fərqli dillər (yükləmənin əvvəlində "
-#~ "seçdiyinizdən) seçmək istəyirsinizsə,\n"
-#~ "xahiş edirik, onları yuxarıdakı siyahıdan seçin.\n"
-#~ "�gər hamısını seçmək istəyirsiniz isə \"Hamısını\" seçin."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seç:\n"
-#~ "\n"
-#~ "  - Xüsusi: �gər Linuksa aşina isəniz  bu seçənəyə tıqlayın.\n"
-#~ "    Sonra sistemin sinifini seçə biləcəksiniz.\n"
-#~ "     Ayrınrılar üçün aşağıya baxın.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Usta: �gər GNU/Linuks haqqında yaxşı bilik sahibi isəniz bunu seçin.\n"
-#~ "    Daha sonra \"Xüsusi\" seçkisində olduğu kimi sistemin sinifini seçə "
-#~ "biləcəksiniz.\n"
-#~ "    Ancaq artıq dərəcədə xahiş edirik, N� ETDİYİNİZİ BİLMİRS�NİZ BU  "
-#~ "SİNİFİ SEÇM�YİN!."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "İndi isə kompüterinizi necə işlədəcəyinizə qerar verin.Seç:\n"
-#~ "\n"
-#~ "* Masa üstü: kompüterinizi gündəlik işlər (idarə işləri, qrafika vs.)\n"
-#~ " üçün istifadə edəcək isəniz, bunu seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Təcrübi: Kompüterinizi proqram tə'minatı inkişafı üçün işlədəcəksəniz, "
-#~ "sizin üçün ideal seçkidir.\n"
-#~ " O zaman qaynaq kodları yazmaq, şəkilləndirmək və xətadan ayıqlamaq və ya "
-#~ "proqram paketləri hazırlamaq üçün lazımi hər cür proqramın daxil olduğu "
-#~ "bir kolleksiya kompüterinizə qurulacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Verici: Kompüterinizə Linuks-Mandrakeni verici olaraq işlətmək üçün "
-#~ "quracaqsanız, bu yaxşı bir seçkidir.\n"
-#~ " Bir fayl vericisi (NFS ya da SMB),çap edici vericisi(Unixin lp protokolu "
-#~ "ya da Windows tərzi SMB çap),\n"
-#~ " tanıdıcı verici (NIS), mə'lumat tabanı vericisi və oxşarı...Onda KDE, "
-#~ "GNOME kimi məzəli şeylərin qurulmağını gözləməyin."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "İndi qurmaq ya da güncəlləmək istədiyiniz paket qruplarını\n"
-#~ "seçə bilərsiniz.\n"
-#~ "\n"
-#~ "Sonra DrakX seçdiklərinizi qurmaq ya da güncəlləmək üçün lazımi \n"
-#~ "boş yerinizin olub olmadığını sınayacaq. �gər yoxsa, sizə bunu \n"
-#~ "söyləyəcək. Nə olursa olsun davam etmək istəsəniz,yükləmə davam edəcək.\n"
-#~ "Amma daha az ehtiyac olan paketlər qurulmayacaq.\n"
-#~ "Siyahının üstündə \"Şəxsi paket seçilməsi\"\n"
-#~ "seçənəyini işarətləsiniz 1000dən artıqpaket arasından seçə bilərsiniz."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "İndi isə siz istədiyiniz paketi qurmaq üçün\n"
-#~ "seçə bilərsiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paket pəncərəsi solundakı bucaqdaki seçənəyə tıqlayaraqağacı həm aça\n"
-#~ "həm də sıxışdıra bilərsiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketlərin əlifba sırasına görə düzülməsini istəyirsinizsə\n"
-#~ "\"Otaq və grupu  düz\"\n"
-#~ "düyməsinə basın.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paket ehtiyacları xəbərdarlıqlarını istəmirsəniz \"Avtomatik\n"
-#~ "ehtiyaclar\"ı seçə bilərsiniz.\n"
-#~ "Amma bunu işarətlədiyiniz vaxt unutmayın bir paketin işarətini "
-#~ "qaldırdığınızda\n"
-#~ "ehtiyacı olan digər paketlerin de işarəti səssizcə qalxar."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Yuxarıdakı siyahıdakı bütün CDlərə sahibsəniz, OLDUya tıqlayın.\n"
-#~ "Bu CD'lərin heç birinə sahib deyilsəniz, Ləğv et'i tıqlayın.\n"
-#~ "CD'lərdən bə'ziləri əksiksə, bunları seçili vəziyyətdən çıxarıb OLDUya "
-#~ "tıqlayın."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Kompüterinizi internete və ya yerli networka bağlamaq\n"
-#~ "istəyirsinizsə xahiş edirik doğru xüsusiyəti seçin. Ayrıca DrakXin bunu "
-#~ "tapması üçün avadanlığınızı açın.\n"
-#~ "\n"
-#~ "\n"
-#~ "İnternet və ya yerli networka heç girişiniz yox isə\"Şəbəkə qurğularını "
-#~ "keç\"\n"
-#~ "seçənəyini işarətləyin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Şəbəkə qurğularını sonraya buraxmaq istəyirsinizsəvə ya qurğular bitdiysə "
-#~ "\"Oldu\" seçənəyini işarətləyin."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modem tapılmadı. Xahiş edirik modemin bağlı olduğu serial qapını seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xəbəriniz olsun, birinci serial qapı (Windows altında\n"
-#~ "\"COM1\") linux altında\"ttyS0\" deyə adlandırılır."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "İndi isə çevirməli bağlantı xüsusiyyətləri seçə bilərsiniz.\n"
-#~ "�gər bilmirsinizsə və ya ne girəcəyinizə qerar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi) bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Modeminiz xarici isə modeminizi açın ki DrakX onu avtomatik olaraq tapsın."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Xahiş edirik modeminizi açın ve doğru seçənəyi işarətləyin."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "�gər yuxarıdakılar haqqında mə'lumatınız yox isə və ya ne girəcəyinizə "
-#~ "qərar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi)bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "İndi isə ev sahibi bilgilərini girin. Ne girəcəyinizə\n"
-#~ "qerar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi)bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Seç:\n"
-#~ "\n"
-#~ " - IP ünvanı: �gər IP ünvanını bilmirsinizsə, sistem idarəcisinəya da \n"
-#~ "İnternet xidmət vericisinə danışın.\n"
-#~ "\n"
-#~ " - Şəbəkə maskası: Ümumiyyətlə \"255.255.255.0\" yaxşı bir seçkidir. �gər "
-#~ "əmin \n"
-#~ "deyilsəniz, yenə sistem idarəcinizə ya da xidmət vericinizəsoruşun.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Avtomatik IP : �gər networkunuz bootp ya da dhcp protokollarından bir "
-#~ "dənəsini \n"
-#~ "istifadə edirsə bu seçənəyi işarətləyin."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "�gər şəbəkədə NIS işlədilirsə, \"NIS kullan\" seçənəyini işarətləyin. "
-#~ "�gər \n"
-#~ "bilmirsinizsə sistem idarəcinizə soruşun."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr "İndi ev sahibi adını girin. Bilmirsinizsə boş buraxın."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "İndi çevirməli bağlantı seçənəklərini girə bilərsiniz. �gər nə yazılması "
-#~ "lazım olduğunu\n"
-#~ "bilmirsinizsə İnternet xidmət vericinizdən lazımi bilgiləri alın."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr "�gə vəkil (proxy) verici istifadə edacəmsəniz bunları girin."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "�gər İnternet bağlantınız doğru şəkildə qurulmuş isə kriptoqrafik "
-#~ "paketi \n"
-#~ "də qura bilərsiniz. �vvəl bir əks ünvanı seçin və daha sonra qurulacaq \n"
-#~ "paketləri quraşdırın."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "İndi isə yaşadığınız yerə görə zaman zolağını seçin."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Siz indi yerli və ya çevirməli yazıçını qura bilərsiniz\n"
-#~ "(Unix, Netware və ya Microsoft Windows networkundakı)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Yazdırma funksiyası istəyirsinizsə CUPS və LPR arasında seçici\n"
-#~ "davranmalısınız.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS yeni, güclü ve elastik bir Unix yazdırma sistemidir\n"
-#~ "CUPS yəni \"Common Unix Printing System\". Bu da Linuks Mandrake\n"
-#~ "də əsas yazdırma sistemidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR Linuks Mandrakenin köhne sistemidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "Printeriniz yox isə  \"Yox\" düyməsinə tıqlayın."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linuks bir çox çap edici növü işlədə bilər. Hər bir növ\n"
-#~ "müxtəlif quruluş istəyər.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çap ediciniz fiziki olaraq kompüterinizə bağlı isə\n"
-#~ "\"Yerli çap edici\"nı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Unix sisteminə bağlı çap ediciyə uzaqdan bağlanmaq istəyirsinizsə\n"
-#~ "\"Uzaqdan bağlanılan çap edici\".\n"
-#~ "\n"
-#~ "\n"
-#~ " MS Windows kompüterinə (və ya SMB protokolunu\n"
-#~ "işlədən Unix kompüterinə) bağlı bir çap ediciyə çatmaq üçün\n"
-#~ "\"SMB/Windows95/98/NT\" seçənəyini işarətləyin."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Xahiş edirik DrakXin tapa bilməsi üçün yazıçınızı açın.\n"
-#~ "\n"
-#~ "Burada bir neçə mə'lumat verməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Çap Edici adı: yazıçılar üçün \"lp\" işlədilir.\n"
-#~ "Ona görə də yazıçınızın adı \"lp\" olmalıdır.\n"
-#~ "Bir neçə çap ediciniz var isə istədiyiniz adı verə bilərsiniz. Sadəcə "
-#~ "olaraq ə aralarına boru işarəti \"|\" qoymalısınız.\n"
-#~ "Məsələn \"Mənim yazıçım|lp\".\n"
-#~ "Adında \"lp\" olan çap edici baş çap edici olacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Təsvir: İstəyə bağlıdır. Amma bir neçə çap ediciniz var isə\n"
-#~ "bir xeyli faydalı ola bilər.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Yerləşmə: Çap Edicinin yeri haqqında istədiyinizi yaza bilərsiniz."
-#~ "Məsələn, \"2ci mərtəbə\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Burada bir neçə mə'lumat verməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "*İstək adı:  yazıçılar üçün \"lp\" işlədilir.\n"
-#~ "Ona görə də yazıçınızın adı \"lp\" olmalıdır.\n"
-#~ "Bir neçə çap ediciniz var isə istədiyiniz adı verə bilərsiniz. Sadəcə "
-#~ "əolaraq aralarına boru işarəti \"|\" qoymalısınız.\n"
-#~ "Məsələn \"Mənim yazıçım|lp\".\n"
-#~ "Adında \"lp\" olan çap edici baş çap edici olacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Saxlama qovluğu: Çap Edici sifarişlərinizi saxlanıldığı yer.\n"
-#~ "Mövzudan bixəbər isəniz əsas qurğunu seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Çap Edici bağlantısı: Çap Edici fiziki olaraq kompüterə bağlı ise\n"
-#~ "\"Yerli Çap Edici\" seçin.\n"
-#~ "Uzaq bir Unix sistemə bağlı çap edici isə\"Uzaqdan idarəli lpd Çap Edici"
-#~ "\" seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Uzaq SMB vericisi işlədən Unix və ya Windows sisteminə bağlıyazıçı üçün "
-#~ "isə \"SMB/Windows 95/98/NT\" seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "NetWare şəbəkədə yerləşən çap edici üçün isə\"NetWare\" seçin.\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Sizin çap edici tapılmadı. Xahiş edirik bağlı olduğu avadanlığın\n"
-#~ "adını girin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xəbəriniz olsun, bir çox çap edici birinci paralel qapıya bağlıdır.\n"
-#~ "Bu da GNU/Linuksda \"/dev/lp0\", Windowsda isÉ™ \"LPT1\"dir."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "İndi yuxarıdakı siyahıdan çap edici seçmalisiniz."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Xahiş edirik yazıcınız üçün doğru qurğuları girin.\n"
-#~ "Nə seçəcəyinizi bilmirsiniz isə sənədlərə baxın\n"
-#~ "\n"
-#~ "\n"
-#~ "Bir sonrakı addımda yazıcınızı sınaya bilərsiniz və\n"
-#~ "daha sonra da istədiyiniz zaman dəyişdirə bilər."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Linuks sisteminiz üçün bir idarəci parolu verilməlidir. Bu parol\n"
-#~ "yazılış xətalarına meydan verməməsi və e'tibarlı olması səbəbi ilə iki "
-#~ "dəfə\n"
-#~ "girilməlidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bu parolu diqqətli seçməlisiniz. Sadəcə idarəi parolunu bilən \n"
-#~ "adamlar sistemi idarə və dəyişiklik edə bilirlər. Ayrıca idarəci \n"
-#~ "parolu ilə sistemə girən bir adam bütün veriləri silib, sistema zərər \n"
-#~ "verə bilər. Seçdiyiniz parol alfanumerik xarakterlər daxil edib en az 8 "
-#~ "xarakter uzunluğunda olmalıdır. Hər hansı bir kağıza, dəftara qeyd\n"
-#~ "alınmamalıdır. Çox uzun bir parol və ya çox qarışıq bir parol işlədilir "
-#~ "isÉ™ \n"
-#~ "parolun xatırlanması çətinləşir.\n"
-#~ "\n"
-#~ "\n"
-#~ "İdarəci olaraq sistemə girəcayiniz zaman, giriş sırasında \"login\"\n"
-#~ "yazan qismə \"root\" və \"password\" yazan qismə idarəci parolunu\n"
-#~ "yazmalısınız."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "İndi bir ya da daha çox adamın Linuks sisteminizi istifadə etməsinə "
-#~ "icazÉ™\n"
-#~ "verə bilərsiniz. Hər istifadəçi hesabı üçün edilən dəyişikliklər sadəcə\n"
-#~ "o istifadəçi ve istifadəçinin \"istifadəçi sırası\" üçün hökmlü olar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sistemi sadəcə siz istifadə edeceksəniz belə ayrı bir istifadəçi hesabı "
-#~ "açaraq\n"
-#~ "normal işler üçün bu hesabı istifadə etməlisiniz. İdarəçi \"root\" "
-#~ "hesabı\n"
-#~ "gündəlik işlərdə istifadə edilməməlidir. Bu bir təhlükəsizlik riski "
-#~ "təşkil edər.\n"
-#~ "Sadə bir istifadəçi hesabı ilə işləmək sizi və sistemi size qarşı\n"
-#~ "qoruyar. İdarəci hesabı olan \"root\" sadəcə, sadə bir istifadəçi hesabı\n"
-#~ "ilə etməyəcəyiniz idarə və təmir işləri üçün istifadə edilməlidir."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Başlanğıc disketi yaradılması aşırı dərəcədə tövsiyyə edilir.\n"
-#~ "Sistemi aça bilmədiyiniz zaman bu, sizin üçün tək qurtuluş yolu olar.\n"
-#~ "Yoxsa sistemi yenidən yükləmək məcburiyyətindəsiniz."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO və grub ana seçənəkləri bunlardır: \n"
-#~ "- Açılış avadanlığı: Açılış sektorunu olduğu sabit disk bölməsini daxil "
-#~ "edən avadanlığın\n"
-#~ "adını təyin edər.\n"
-#~ "�gər heç bir şey bilmirsinizsə \"/dev/hda\"yı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "- �sas əks ilə açmadan əvvəl gecikmə: Açılış sistem yükləyicisinin ilk \n"
-#~ "əksi açmadan əvvəl gözləyəcəyi zamanın, saniyənin onda biri cinsindən "
-#~ "miqdarıdır.\n"
-#~ "Bu, klaviaturanın fəallaşmasından həmən sonra sabit diskdən açılan "
-#~ "sistemlər üçün faydalıdır.\n"
-#~ "Sistem yükləyicisi, əgər \"delay\" sıfır olaraq verilmiş isə\n"
-#~ "heç gözləməz.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Ekran modu: Açılışda bir neçə mətn ekran modu seçilə bilər:\n"
-#~ "   * sadə: 80x25 mətn ekran açılır.\n"
-#~ "    * <rəqəm>: Göstərilənn rəqəmlərə görə mətn ekran rezolyusiyası "
-#~ "quraşdırılır.\n"
-#~ "\n"
-#~ "\n"
-#~ "- \"/tmp\"I hər açılışda təmizlə: �gər hər açılışda \"/tmp\" cərgəsində "
-#~ "olan bütün\n"
-#~ "olan bütün cərgə və qovluqların silinməsini istəyirsinizsə, bu seçənəyi "
-#~ "seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Var olan RAM miqdarı: Təəsüf ki, Linuks həmişə RAM miqdarını BIOSdan "
-#~ "düzgün\n"
-#~ "bir şəkildə öyrənəməyə bilər. Onda siz çzünüz sisteminizdə olan həqiq RAM "
-#~ "miqdarını buradan\n"
-#~ "girə bilərsiniz. Yadda saxlayın ki, həqiqi RAM ilə sistemin tapdığı "
-#~ "miqdar arasında 2\n"
-#~ "və ya 4 MBlıq fərq ola bilər."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO (Linuks Yükləyici) SPARC üçün bir sistem yükləyicidir: sistemi "
-#~ "Linuks\n"
-#~ "ya da kompüterinizdəki başqa bir əməliyyat sistemiylə aça bilirlər.\n"
-#~ "�sasən bu digər əməliyyat sistemləri doğru bir şəkildə təsbit edilib "
-#~ "açılışa\n"
-#~ "qurula bilərlər. �gər bir problem olarsa, buradan əllə əlavə edilə "
-#~ "bilərlər.\n"
-#~ "Parametrlər mövzusunda diqqətli olun."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "  - Açılış avadanlığı: Açılış sektorunu olduğu sabit disk bölməsini daxil "
-#~ "edən avadanlığın\n"
-#~ "adını təyin edər.\n"
-#~ "�gər heç bir şey bilmirsinizsə \"/dev/hda\"yı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ana əks ilə açmadan əvvəl gecikmə: Açılış sistem yükləyicisinin ilk \n"
-#~ "görünüşü açmadan əvvəl gözləyəcəyi zamanın, saniyənin onda biri cinsindən "
-#~ "miqdarıdır.\n"
-#~ "Bu, klaviaturanın aktivləşməsindən həmən sonra sabit diskdən açılan "
-#~ "sistemlər üçün faydalıdır.\n"
-#~ "Sistem yükləyicisi, əgər delay sıfır olaraq verilmiş isə\n"
-#~ "heç gözləməz."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Buradan etibarən, Linuks GUI (Qrafik İstifadəçi Ara üzü) çəkirdəyini\n"
-#~ "əmələ gətirən X Window sistemini quracağıq. Buna görə də ekran kartınızı\n"
-#~ "və monitorunuzu qurmalısınız. Bu addımların çoxu onsuz da avtomatik "
-#~ "olaraq\n"
-#~ "keçiləcək və sizə sadəcə olaraq tövsiyə edilən qurğuları incələmək və "
-#~ "qəbul etmək\n"
-#~ "düşəcək. :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quruluş qurtardığında əgər DrakXdən əksini istəmədiniz isə X Window \n"
-#~ "başlayacaqdır. Qurğuşarınıza baxın və yoxlayın. Qurğularınızı yoxlayaraq\n"
-#~ "uyuşmazlıq olub olmadığına baxın, lazım gəlirsə geriyə dönün."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr "X qurğularında problem olarsa aşağıdakı seçənəkləri istifadə edin."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "�gər sistemə girərkən qrafik arar üzünün gəlməsini istəyirsənız isə \"Bəli"
-#~ "\",əks halda \"Xeyr\" düyməsinə basın."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Sisteminiz üçün təhlükəsizlik səviyyəsini seçə bilərsiniz. �traflı "
-#~ "mə'lumat üçün xahiş edirik bələdçiyə\n"
-#~ " baş vurun. �sasən , nə seçəcəyinizi bilmirsiniz isə buraya heç "
-#~ "toxunmayın.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "İndi sistem yenidən qapanıb açılacaqdır.\n"
-#~ "\n"
-#~ "Açıldıqdan sonra Linuks Mandrake avtomatik olaraq yüklənəcəkdir. �gər "
-#~ "baÅŸqa \n"
-#~ "bir əməliyyat sistemi də işlədəcəksəniz əlavə xəbərdarlıqları oxuyun."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Çex dili (Proqramcılar)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakca (Proqramcılar)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Yaradılacaq profil adı:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "/etc/fstab-a Yaz"
-
-#~ msgid "Format all"
-#~ msgstr "Hamısını şəkilləndir"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Bütün bölmələri şəkilləndirdikdən sonra, "
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "bu bölmələrdəki bütün verilər itəcəkdir"
-
-#~ msgid "Reload"
-#~ msgstr "Yenidən yüklə"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Linuks köçürülməsi üçün bir dənə avtomatik qurulum disketi yaratmaq "
-#~ "istəyərmisiniz?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL quraşdırılması"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Uzaq CUPS vericiləri üçün heç bir quraşdırmaya lüzüm yoxdur \n"
-#~ "Buradakı hər çap edici avtomatik tapılacaqdır. \n"
-#~ "�gər uzaq çap edici vericiniz var ise CUPS vercisinin \n"
-#~ "IP ünvanını verməlisiniz. Qapı nömrəsi vacib \n"
-#~ "deyil."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Uzaqdakı növbə adı"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Sahə(domain) adı"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Çap Edicisiz"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Şəbəkə Monitoru"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistikalar"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Yollama Sür'əti:"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Alam Sür'əti:"
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Bağlantı növü:"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "İnternetə bağlanılır"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "İnternet ilə bağlantını kəs"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "İnternet ilə bağlantı kəsilməsi bacarılmadı."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "İnternet ilə bağlantı kəsilməsi qurtardı."
-
-#~ msgid "Connection complete."
-#~ msgstr "Bağlantı qurtardı."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Bağlantı iflas etdi.\n"
-#~ "Qurğularınızı Mandrake İdarə Mərkəzindən yoxlayın."
-
-#~ msgid "sent: "
-#~ msgstr "yollandı:"
-
-#~ msgid "received: "
-#~ msgstr "alındı:"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "�sas Runlevel"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Quraşdırma faylının içindəkilərlə oynanılmaz"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tanınmaz quraşdırma faylı"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "BaÄŸla"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Aç"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "İndi siçanı sınaya bilərsiniz. Hər şeyin yolunda olduğunu \n"
-#~ "sınamaq üçün düymə və çarxı işlədin. Qurğular yaxşı isə\n"
-#~ "problem yoxdur. �gər deyilsə onda \"Ləğv et\"i tıqlayaraq\n"
-#~ "başqa siçan sürücüsü seçə bilərsiniz."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (və ya ADSL) bağlantısı"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Qapat"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "CUPS ilə çap ediciyə yetişmək üçün URIni verməlisiniz"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Bəli, ASCII sınaq səhifəsi çap et"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Bəli, PostScript sınaq səhifəsi çap et"
-
-#~ msgid "Paper Size"
-#~ msgstr "Kağız Böyüklüyü"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "İş bittikdən sonra səhifə atılsın mı?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint sürücü seçənəkləri"
-
-#~ msgid "Color depth options"
-#~ msgstr "Rəng dərinlik seçənəkləri"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Mətni PostScript olaraq yazdırsın mı?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Mətn pilləli olaraq düzəldilsin mi?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Hər yekun səhifəsinin nömrəsi"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Sağ/Sol boşluqlar nöqtəvi(inch'in 1/72'si"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Üst/Alt boşluqlar nöqtəvi (inch'in 1/72'si)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "�lavə GhostScript seçənəkləri"
-
-#~ msgid "Extra Text options"
-#~ msgstr "�lavə mətn seçənəkləri"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Tərs səhifə sıralaması"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Çap Edici Bağlantısı Seçin"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Hər çap edicinin bir adı olmalıdır (məsələn lp).\n"
-#~ "Çap edicinin təsviri və yeri də göstərilməlidir.\n"
-#~ "Bu çap edicinin adı nədir və yeri haradadır?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Hər çap edici növbəsinin (çap edici işlərinin yollandığı yer) bir adı "
-#~ "olar \n"
-#~ "(çoxunda lp) və gözləmə qovluğuna ehtiyac duyar. Bu növbə üçün\n"
-#~ "hansı ad və qovluq istifadə edilsin?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Növbənin adı"
-
-#~ msgid "Spool directory"
-#~ msgstr "Gözləmə qovluğu"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Daha e'tibarlı bir sistem üçün \"Kölgə parol işlət\" və \"MD5 kodlama \n"
-#~ "işlət\" seçənəklərini işarətlayin."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "�gər şəbəkədə NIS istifadə edilirsə, \"NIS işlət\" seçəneyini "
-#~ "işarətləyin.  �gər \n"
-#~ "bilmirsinizsə sistem idarəcinizə soruşun."
-
-#~ msgid "yellow pages"
-#~ msgstr "sarı səhifələr"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Ä°XM dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Ä°XM dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "İnternetə necə bağlanmaq istəyirsiniz?"
diff --git a/perl-install/share/po/b_dump_strings.pm b/perl-install/share/po/b_dump_strings.pm
deleted file mode 100644
index f29275ecd..000000000
--- a/perl-install/share/po/b_dump_strings.pm
+++ /dev/null
@@ -1,113 +0,0 @@
-package b_dump_strings;
-
-use B qw(minus_c save_BEGINs peekop class walkoptree walkoptree_exec
-         main_start main_root cstring sv_undef);
-
-BEGIN { open OUT, ">$ENV{OUTFILE}" }
-
-sub B::CV::debug {
-    my ($sv) = @_;
-    B::walkoptree_exec($sv->START, "debug");
-}
-
-sub B::OP::debug {
-    my ($op) = @_;
-#    print "OP ", class($op), " ", $op->name, "\n";
-    eval {
-	if ($op->name eq 'entersub') {
-	    $op2 = $op->first->first or return;
-
-	    if ($op2->name eq 'pushmark') {
-		my $s = $op2->sibling->sv->PV;
-		my $l;
-		for ($l = $op2->sibling; ${$l->sibling}; $l = $l->sibling) {}
-
-		$s =~ s/"/\\"/g;
-		if ($l->first->sv->NAME eq '_') {
-		    print OUT qq($::pkg _("$s")\n);
-		}
-	    }
-	}
-    };
-}
-sub B::RV::debug {
-    my ($op) = @_;
-    $op->RV->debug;
-}
-sub B::SVOP::debug {
-    my ($op) = @_;
-    $op->sv->debug;
-}
-sub B::PV::debug {
-    my ($sv) = @_;
-#    print "STRING ", $sv->PV, "\n";
-}
-sub B::IV::debug {
-    my ($sv) = @_;
-#    printf "IV\t%d\n", $sv->IV;
-}
-sub B::NV::debug {
-    my ($sv) = @_;
-#    printf "NV\t%s\n", $sv->NV;
-}
-sub B::PVIV::debug {
-    my ($sv) = @_;
-#    printf "IV\t%d\n", $sv->IV;
-}
-sub B::PVNV::debug {
-    my ($sv) = @_;
-#    printf "NV\t%s\n", $sv->NV;
-}
-sub B::AV::debug {
-    my ($av) = @_;
-#    print "ARRAY\n";
-}
-sub B::GV::debug {
-    my ($gv) = @_;
-#    printf "GV %s::%s\n", $gv->STASH->NAME, $gv->SAFENAME;
-}
-sub B::NULL::debug { 
-#    print "NUL\n";
-}
-sub B::SPECIAL::debug {}
-
-sub B::SV::debug { die "SV"; }
-sub B::BM::debug { 
-    die "BM"; 
-}
-sub B::PVLV::debug { die "PVLV"; }
-
-sub B::GV::pgv {
-    my ($gv) = @_;
-#    print $gv->NAME, "\n";
-    $gv->SV->debug;
-    $gv->HV->debug;
-    $gv->AV->debug;
-    $gv->CV->debug;
-}
-
-
-
-
-sub search {
-
-foreach my $pkg (grep { /^[a-z]/ && !/^(diagnostics|strict|attributes|main)/ } grep { /\w+::$/ } keys %main::) {
-    $::pkg = $pkg;
-    foreach (keys %{$main::{$pkg}}) {
-	print STDERR "$pkg $_ XXXXX\n";
-	local *f = *{$main::{$pkg}{$_}};
-	B::svref_2object(\*f)->pgv;
-    }
-}
-print STDERR "DONE\n";
-}
-
-CHECK { search() }
-INIT { exit 0 }
-
-#use lib qw(. /home/pixel/gi/perl-install);
-##use commands;
-#require '/tmp/t.pl';
-#search();
-
-1;
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
deleted file mode 100644
index 617c278c6..000000000
--- a/perl-install/share/po/be.po
+++ /dev/null
@@ -1,13566 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 MandrakeSoft.
-# Alexander Bokovoy <ab@avilink.net>, 2000
-# Maryia Davidouskaia <maryia@scientist.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-09-24 12:30 +0100\n"
-"Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
-"Language-Team: be\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=windows-1251\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, fuzzy, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Êàíôiãóðàâàöü ìàþ êàðòó"
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "÷ûòàííå íàñòðîéêi"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Âiäýàêàðòà"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Àáÿðûöå âiäýàêàðòó"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Àáÿðûöå X ñåðâåð"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ñåðâåð"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Àáÿðûöå X ñåðâåð"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ñåðâåð"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "Ñåðâåð XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ßêóþ êàíôiãóðàöûþ XFree âû æàäàåöå àòðûìàöü?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ïàäòðûìêà 3D-ïàñêàðýííÿ ¢ Âàøàé â³äýàêàðöå âûêàíàíà òîëüê³ ¢ XFree %s.\n"
-"XFree %s ìîæà âûêàðûñòî¢âàöü òîëüê³ 2D-ïàñêàðýííå äëÿ ãýòàé â³äýàêàðòû."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Âàøà âiäýàêàðòà ìîæà ìåöü 3D-ïàñêàðýííå, ÿêîå ïàäòðûìëiâàåööà òîëüêi XFree %"
-"s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ç ïàäòðûìêàé 3D-ïàñêàðýííÿ"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Âàøà âiäýàêàðòà ìîæà ìåöü 3D-ïàñêàðýííå, ÿêîå ïàäòðûìëiâàåööà òîëüêi XFree %"
-"s.\n"
-"ÌÀÉÖÅ ÍÀ ¡ÂÀÇÅ, ØÒÎ ÃÝÒÀ ÝÊÑÏÅÐÛÌÅÍÒÀËÜÍÀß ÏÀÄÒÐÛÌÊÀ I ÌÎÆÀ ÏÐÛÂÅÑÖI ÄÀ\n"
-"ÇÀÂIÑÀÍÍß ÂÀØÀÃÀ ÊÀÌÏ'ÞÒÝÐÓ."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ç ýêñïåðûìåíòàëüíàé ïàäòðûìêàé 3D-ïàñêàðýííÿ"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Âàøà âiäýàêàðòà ìîæà ìåöü 3D-ïàñêàðýííå, ÿêîå ïàäòðûìëiâàåööà òîëüêi XFree %"
-"s.\n"
-"ÌÀÉÖÅ ÍÀ ¡ÂÀÇÅ, ØÒÎ ÃÝÒÀ ÝÊÑÏÅÐÛÌÅÍÒÀËÜÍÀß ÏÀÄÒÐÛÌÊÀ I ÌÎÆÀ ÏÐÛÂÅÑÖI ÄÀ\n"
-"ÇÀÂIÑÀÍÍß ÂÀØÀÃÀ ÊÀÌÏ'ÞÒÝÐÓ. Âàøà âiäýàêàðòà ïàäòðûìëiâàåööà XFree %s, ÿêi\n"
-"ëåïåé ïàäòðûìëiâàå êàðòû ç 2D-ïàñêàðýííåì."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Íàñòðîéêà XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Ïàçíà÷öå ïàìåð âiäýàïàìÿöi"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Àáÿðûöå äàäàòêîâûÿ íàñòðîéêi äëÿ ñåðâåðà"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Àáÿðûöå ìàíiòîð"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ìàíiòîð"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Äâà êðûòû÷íûõ ïàðàìåòðû - ãýòà ÷àñö³íÿ âåðòûêàëüíàé ðàçãîðòêi, öi\n"
-"÷àñö³íÿ àäíà¢ëåííÿ ¢ñÿãî ýêðàíó, à òàêñàìà áîëåé âàæíû ïàðàìåòð -\n"
-"÷àñö³íÿ ãàðûçàíòàëüíàé ñiíõðàíiçàöûi ðàçãîðòêi, öi ÷àñö³íÿ âûâàäó\n"
-"ðàäêî¢ ýêðàíó.\n"
-"\n"
-"ÂÅËÜÌI ÂÀÆÍÀ, êàá àáðàíû âàìi ìàíiòîð ìå¢ ÷àñö³íþ ñiíõðàíiçàöûi, ÿêàÿ\n"
-"íå ïåðàâûøàå ôàêòû÷íûÿ ìàã÷ûìàñöi âàøàãà ìàíiòîðó: ó ïðîöiëåãëûì âûïàäêó\n"
-"âû ìîæàöå ñàïñàâàöü ìàíiòîð.\n"
-"Êàëi âû ñóìíÿâàåöåñÿ, àáÿðûöå êàíñåðâàòû¢íûÿ íàñòðîéêi."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "×àñö³íÿ ãàðûçàíòàëüíûé ðàçãîðòêi"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "×àñö³íÿ âåðòûêàëüíàé ðàçãîðòêi"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ìàíiòîð ïàêóëü íå íàñòðîåíû"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Âiäýàêàðòà ÿø÷ý íå àäêàíôiãóðàâàíà"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Ïàìåðû ýêðàíó ÿø÷ý íå ïàçíà÷àíû"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Ïàïÿðýäæàííå: òýñöiðàâàííå íà ãýòàé âiäýàêàðöå íåáÿñïå÷íà"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Ïðàâåðêà ïàðàìåòðࢠíàñòðîéêi"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ïàñïðàáóéöå çìÿíiöü íåêàòîðûÿ ïàðàìåòðû"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ïàìûëêà:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Çàñòàëîñÿ %d ñåêóíäà¢"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ãýòà äàêëàäíûÿ ïàðàìåòðû íàñòðîéêi?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Àòðûìàíà ïàìûëêà, ïàñïðàáóéöå çìÿíiöü ïàðàìåòðû"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Ïàìåðû ýêðàíó"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Âûáàð ïàìåðࢠýêðàíó i ãëûáiíi êîëåðó"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Âiäýàêàðòà: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Ñåðâåð XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Ïåðàíîñ"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Îê"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Ýêñïåðò"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ïàêàçàöü óñ¸"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Ïàìåðû ýêðàíó"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Òûï êëàâiÿòóðû: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Òûï ìûøû: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Ìûø: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ìàíiòîð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "×àñö³íÿ ãàð.ðàçã. ìàíiòîðó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "×àñö³íÿ âåðò.ðàçã. ìàíiòîðó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Âiäýàêàðòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Âiäýàêàðòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Âiäýàïàìÿöü: %s Êá\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Ïàðàìåòðû ãëûáiíi êîëåðó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Ïàìåðû ýêðàíó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Ñåðâåð XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Ñåðâåð XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ïàäðûõòî¢êà íàñòðîéêi X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Øòî âû æàäàåöå çðàáiöü?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Çìÿíiöü ìàíiòîð"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Çìÿíiöü âiäýàêàðòó"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Çìÿíiöü íàñòðîéêi Ñåðâåðó"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Çìÿíiöü ïàìåðû ýêðàíó"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Iíôàðìàöûÿ"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Ïðàâåðûöü ÿø÷ý ðàç"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Âûõàä"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Ö³ æàäàåöå Âû çàõàâàöü çìÿíåíí³?\n"
-"Áÿãó÷àÿ êàíô³ãóðàöûÿ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Çàïóñê X ïðû ñòàðöå ñiñòýìû"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ìîæíà íàñòðîiöü ñiñòýìó äëÿ à¢òàìàòû÷íàãà çàïóñêó X ïàñëÿ ñòàðòó ñiñòýìû.\n"
-"Æàäàåöå, êàá X ñòàðòàâࢠïðû ðýñòàðöå?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Êàëi ëàñêà, ïåðàéäçiöå ¢ %s äëÿ àêòûâàöûi çìÿíåííÿ¢"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Êàëi ëàñêà, âûéäçiöå, à ïîòûì ñêàðûñòàéöå Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 êîëåðࢠ(8 áiòà¢)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 òûñÿ÷û êîëåðࢠ(15 áiòà¢)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 òûñÿ÷ êîëåðࢠ(16 áiòà¢)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ìiëü¸íࢠêîëåðࢠ(24 áiòû)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ìiëiÿðäà êîëåðࢠ(24 áiòû)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 Êá"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 Êá"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 Ìá"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 Ìá öi áîëåé"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Ñòàíäàðòíû VGA, 640x480 ïðû 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ïðû 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Ñóìåñíû ç 8514, 1024x768 ïðû 87 Hz ïðàçðàäêîâà (íÿìà 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ïði 87 Hz ïðàçðàäêîâà, 800x600 ïðû 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ïðû 60 Hz, 640x480 ïðû 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Íåïðàçðàäêîâà SVGA, 1024x768 ïðû 60 Hz, 800x600 ïðû 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Âûñîê÷àñö³í¸âû SVGA, 1024x768 ïðû 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Øìàò÷àñö³í¸âû, ÿêi çäîëüíû ïàäòðûìëiâàöü 1280x1024 ïðû 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Øìàò÷àñö³í¸âû, ÿêi çäîëüíû ïàäòðûìëiâàöü 1280x1024 ïðû 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Øìàò÷àñö³í¸âû, ÿêi çäîëüíû ïàäòðûìëiâàöü 1280x1024 ïðû 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ìàíiòîð, ÿêi çäîëüíû ïàäòðûìëiâàöü 1600x1200 ïðû 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ìàíiòîð, ÿêi çäîëüíû ïàäòðûìëiâàöü 1600x1200 ïðû 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Ïåðøû ñåêòàð çàãðóçà÷íàãà ðàçäçåëó"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ïåðøû ñåêòàð ïðûëàäû (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Óñòàëÿâàííå SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Êóäû âû æàäàåöå ¢ñòàëÿâàöü ïà÷àòêîâû çàãðóç÷ûê?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Óñòàëÿâàííå LILO/GRUB"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Ãàëî¢íûÿ îïöûi ïà÷àòêîâàãà çàãðóç÷ûêó"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Ãàëî¢íûÿ îïöûi ïà÷àòêîâàãà çàãðóç÷ûêó"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Óñòàëÿâàííå çàãðóç÷ûêó"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Çàãðóçà÷íàÿ ïðûëàäà"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (íå ïðàöóå ïðû ñòàðûõ âåðñiÿõ BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Êàìïàêòíà"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "êàìïàêòíà"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Âiäýà-ðýæûì"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Çàòðûìêà ïåðàä çàãðóçêàé âîáðàçó ïà äàìà¢ëåííþ"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Ïàðîëü"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Ïà¢òàðûöå ïàðîëü"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Àáìåæàâàííå îïöûÿ¢ êàìàíäíàãà ðàäêà"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "àáìåæàâàííå"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "À÷ûø÷àöü /tmp ïðû êîæíàé çàãðóçöû"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ïàçíà÷öå äàêëàäíû ïàìåð RAM (çíîéäçåíà %d Má)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Äàñòóïíà øìàò ïðîôiëÿ¢"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Ïàçíà÷öå ïàìåð RAM ó Má"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Îïöûÿ ``Àáìåæàâàííå îïöûÿ¢ êàìàíäíàãà ðàäêó'' íå âûêàðûñòî¢âàåööà áåç ïàðîëÿ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Ïàñïðàáóéöå ÿø÷ý ðàç"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ïàðîëi íå ñóïàäàþöü"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Ïà äàìà¢ëåííþ"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ó ìåíþ ìàþööà íàñòóïíûÿ ïóíêòû.\n"
-"Âû ìîæàöå äàäàöü ÿø÷ý, àëüáî çìÿíiöü iñíóþ÷ûÿ."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Äàäàöü"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Çðîáëåíà"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Çìÿíiöü RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ßêi òûï ïóíêòà æàäàåöå äàäàöü?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Iíøàÿ ÀÑ (SunOS,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Iíøàÿ ÀÑ (MacOS,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Iíøàÿ ÀÑ (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Âîáðàç"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Äàëó÷ûöü"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "×ûòàííå-çàïiñ"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Òàáëiöà"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Íåíàäçåéíà"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Ìåòêà"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Ïà äàìà¢ëåííþ"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Âûäàëiöü çàïiñ"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Ïóñòàÿ ìåòêà íå äàçâàëÿåööà"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Âû ïàâiííû ìåöü ðàçäçåë swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ãýòàÿ ìåòêà ¢æî âûêàðûñòî¢âàåööà"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Çíîéäçåíû %s %s iíòýðôåéñû"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Öi ¸ñöü ó âàñ iíøû?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Öi ¸ñöü ó âàñ %s iíòýðôåéñ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Íå"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Òàê"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ãë. àïiñàííå àáñòàëÿâàííÿ"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Óñòàëÿâàííå äðàéâåðó äëÿ %s êàðòû %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(ìîäóëü %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ßêi äðàéâåð %s ïàñïðàáàâàöü?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Ó íåêàòîðûõ âûïàäêàõ %s äðàéâåðó ïàòðýáíà íåêàòîðàÿ äàäàòêîâàÿ iíôàðìàöûÿ,\n"
-"àëå çâû÷àéíà ãýòà íå ïàòðàáóåööà. Öi íå æàäàåöå âû çàäàöü äëÿ ÿãî\n"
-"äàäàòêîâûÿ îïöûi, öi äàçâîëiöå äðàéâåðó ïðàòýñöiðàâàöü ìàøûíó\n"
-"¢ ïîøóêàõ íåàáõîäíàé iíôàðìàöûi? Ìàã÷ûìà, òýñöiðàâàííå ïðûâÿäçå\n"
-"äà ñïûíåííÿ êàìï'þòýðó, àëå ÿíî íi÷îãà íå ñàïñóå."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "À¢òàïîøóê"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Ïàçíà÷öå ïàðàìåòðû"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Âû íå ìîæàöå çàäàöü îïöûi ìîäóëþ %s.\n"
-"Îïöûi - ó ôàðìàöå ``iìÿ=çíà÷ýííå iìÿ2=çíà÷ýííå2 ...''.\n"
-"Íàïðûêëàä, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Îïöûi ìîäóëþ:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Çàãðóçêà ìîäóëþ %s íå ïðàéøëà.\n"
-"Æàäàåöå ïàñïðàáàâàöü ç iíøûìi ïàðàìåòðàìi?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(óæî äàäàäçåíà %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ãýòû ïàðîëü çàíàäòà ïðîñòû"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Êàëi ëàñêà, óâÿäçiöå iìÿ êàðûñòàëüíiêó"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Iìÿ êàðûñòàëüíiêó ïàâiííà çìÿø÷àöü ëiòàðû òîëüêi íà íiæíiì ðýãiñòðû, \n"
-"ëi÷áû, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ãýòà iìÿ êàðûñòàëüíiêó ¢æî äàäàäçåíà"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Äàäàöü êàðûñòàëüíiêà"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Óâÿäçiöå iìÿ êàðûñòàëüíiêó\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Ïðûíÿöü êàðûñòàëüíiêà"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Óëàñíàå iìÿ"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Iìÿ êàðûñòàëüíiêó:"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Àáàëîíêà:"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ïiêòàãðàìà"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "À¢òàìàòû÷íû ¢âàõîä ó ñiñòýìó"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ìîæíà íàñòðîiöü ñiñòýìó äëÿ à¢òàìàòû÷íàãà ¢âàõîäó ¢ ñiñòýìó äëÿ\n"
-"àäíàãî êàðûñòàëüíiêà. Êàëi Âû íå æàäàåöå ãýòàãà, íàöiñíiöå \"Àäìåíà\"."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Àáÿðûöå àñíî¢íàãà êàðûñòàëüíiêà:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Àáÿðûöå ìýíýäæàð âîêíà¢:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Êàëi ëàñêà, àáÿðûöå ìîâó äëÿ êàðûñòàííÿ."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Âû ìîæàöå àáðàöü ³íøûÿ ìîâû, ÿêiÿ áóäóöü äàñòóïíû ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Óñ¸"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Äàäàöü êàðûñòàëüíiêà"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Ïà âûáàðó"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "×àêàåööà"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Àäìåíà"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Ñàðäý÷íà çàïðàøàåì ó Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Çóñ³ì ñëàáû"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ñòàíäàðòíû"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Âûñîêi"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Âûñîêi"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Ïàðàíàiäàëüíû"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ãýòû óçðîâåíü íåàáõîäíà âûêàðûñòî¢âàöü ç àñöÿðîãàé. Ñiñòýìà áóäçå ïðàñöåé\n"
-"ó êàðûñòàííi, àëå i áîëüø ÷óòíàé: ãýòû óçðîâåíü áÿñïåêi íåëüãà "
-"âûêàðûñòî¢âàöü\n"
-"íà ìàøûíàõ, ÿêiÿ äàëó÷àíû äà ñåòêi öi äà Internet. Óâàõîä íå àáàðîíåíû "
-"ïàðîëåì."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ïàðîëü çàðàç óêëþ÷àíû, àëå âûêàðûñòàííå êàìï'þòýðó ¢ ÿêàñöi ñåòêàâàãà\n"
-"òàêñàìà íå ðýêàìåíäàâàíà."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ãýòà ñòàíäàðòíû óçðîâåíü áÿñïåêi, ÿêi ðýêàìåíäàâàíû äëÿ êàìï'þòýðó,\n"
-"ÿêi äàëó÷àíû äà Internet ó ÿêàñöi êëiåíòó. Äàäàíûÿ íîâûÿ ïðàâåðêi\n"
-"áÿñïåêi."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Íà ãýòàì óçðî¢íå áÿñïåêi ìàã÷ûìà âûêàðûñòàííå ñiñòýìû ¢ ÿêàñöi\n"
-"ñåðâåðó. Óçðîâåíü áÿñïåêi äàñòàòêîâà âûñîêi äëÿ ðàáîòû\n"
-"ñåðâåðó, ÿêi äàïóñêàå çëó÷ýííi ñà øìàòëiêiìi êëiåíòàìi."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ïðûìàþööà ¢ëàñöiâàñöi 4 óçðî¢íÿ, àëå çàðàç ñiñòýìà ïî¢íàñöþ çà÷ûíåíà.\n"
-"Ïàðàìåòðû áÿñïåêi ¢ñòàíî¢ëåíû íà ìàêñiìóì."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Óçðîâåíü áÿñïåêi"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Íàñòðîéêi ¢çðî¢íÿ áÿñïåêi"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Àáÿðûöå äàäàòêîâûÿ íàñòðîéêi äëÿ ñåðâåðà"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Íå õàïàå äûñêàâàé ïðàñòîðû ¢ /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Ïðàöî¢íû ñòîë"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Ñòàðòàâàå ìåíþ"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Êóäû âû æàäàåöå ¢ñòàëÿâàöü ïà÷àòêîâû çàãðóç÷ûê?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Íàñòðîéêà ìàäýìó"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-#, fuzzy
-msgid "/_File"
-msgstr "Ôàéëû:\n"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Ìàíiòîð"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Çìÿíiöü ìàíiòîð"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Ðýæûì çëó÷ýííÿ"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Çàãðóçà÷íàÿ ïðûëàäà"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Íàñòðîéêà X Window"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Ìá"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d õâiëií"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 õâiëiíà"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ñåêóíäà¢"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Äàäàöü ðàçäçåë íåìàã÷ûìà"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Âû ìîæàöå àáðàöü ³íøûÿ ìîâû, ÿêiÿ áóäóöü äàñòóïíû ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ôðàíöûÿ"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Áåëüãiéñêi"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Íÿìåöêi"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Ãðý÷àñêi"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Íàðâåæñêi"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Ãë."
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Iòàëüÿíñêi"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "ïàñëÿäî¢íàÿ"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Ïà-ïåðøàå, çðàáiöå ðýçåðâîâóþ êîïiþ âàøûõ äàäçåíûõ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "×ûòàéöå ¢âàæëiâà!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Êàëi âû ïëàíóåöå âûêàðûñòî¢âàöü boot âîáëàñöü, òàäû ðàçìÿñöiöå ÿå\n"
-" íå äàëåé çà 2048 ñåêòàðî¢ àä ïà÷àòêó äûñêà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Ïàìûëêà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Ìàéñòàð ñòâàðýííÿ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Àáÿðûöå äçåÿííå"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Çàðàç âû ìàåöå òîëüêi àäçií âÿëiêi ðàçäçåë FAT\n"
-"(ÿê³ çâû÷àéíà âûêàðûñòî¢âàå MS Dos/Windows).\n"
-"Ïðàïàíóþ, ïà-ïåðøàå, çìÿíiöü ïàìåðû ðàçäçåëà\n"
-"(êëiêíiöå íà ÿãî, à ïîòûì íà \"çìÿíåííå ïàìåðà¢\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Íàö³ñí³öå íà ðàçäçåë"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Ïàäðàáÿçíàñöi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ïàìûëêà ìàíöiðàâàííÿ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Ïóñòà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "²íøûÿ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Òûïû ôàéëàâûõ ñiñòýìà¢:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Ñòâàðûöü"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Òûï"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âûêàðûñòî¢âàéöå ``%s'' çàìåñò"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Çíiø÷ûöü"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Ñïà÷àòêó çðàáiöå ``Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Óñå äàäçåíûÿ ¢ ðàçäçåëå %s áóäóöü ñòðà÷àíû ïàñëÿ çìåíû ÿãî òûïó"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Àáÿðûöå äçåÿííå"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Ñòâàðýííå íîâàãà ðàçäçåëó"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Ðýæûì ýêñïåðòó"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Çâû÷àéíû ðýæûì"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Àäêàò"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Ñàïðà¢äû ïðàöÿãâàöü?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Âûéñöi áåç çàõàâàííÿ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Âûéñöi áåç çàïiñó òàáëiöû ðàçäçåëà¢"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Ðàçìåðêàâàöü à¢òàìàòû÷íà"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "À÷ûñöiöü óñ¸"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Iíôàðìàöûÿ"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Óñå ïåðøàñíûÿ ðàçäçåëû âûêàðûñòàíû"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Äàäàöü ðàçäçåë íåìàã÷ûìà"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Êàá çðàáiöü áîëüø ðàçäåëà¢, âûäàëiöå àäçií i ñòâàðûöå ïàøûðàíû ðàçäçåë "
-"(extended)"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Çàïiñ òàáëiöû ðàçäçåëà¢"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Äàäàòêîâàÿ òàáëiöà ðàçäçåëà¢"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Äàäàòêîâàÿ òàáëiöà ðàçäçåëà¢"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Äàäàòêîâàÿ òàáëiöà ðàçäçåëà¢"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "À¢òàìàíöiðàâàííå çìåííûõ íàçàïàøâàëüí³êà¢"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Àáÿðûöå ôàéë"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Òàáëiöà ðàçìÿø÷ýííÿ ðýçåðâîâàãà äûñêó ìàå iíøû ïàìåð\n"
-"Ïðàöÿãâàöü äàëåé?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Óâàãà!"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Óñòà¢öå äûñêåòó ¢ äûñêàâîä\n"
-"Óñå äàäçåíûÿ íà ãýòàé äûñêåöå áóäóöü ñòðà÷àíû"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Ïàñïðàáóåì âûðàòàâàöü òàáëiöó ðàçäçåëà¢"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Iíôàðìàöûÿ"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Êðîïêà ìàíöiðàâàííÿ"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Îïöûi"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Çìÿíåííå ïàìåðà¢"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Ïåðàíîñ"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Ôàðìàòàâàííå"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Ìàíöiðàâàííå"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Äàäàöü äà RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Äàäàöü äà LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ðàçìàíöiðàâàöü"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Âûäàëiöü ç RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Âûäàëiöü ç LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Çìÿíiöü RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Âûêàðûñòî¢âàöü äëÿ âiðòóàëüíàé ôàéëàâàé ñiñòýìû"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Ñòâàðýííå íîâàãà ðàçäçåëó"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Ïà÷àòêîâû ñåêòàð:"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Ïàìåð ó Ìá:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Òûï ôàéëàâàé ñiñòýìû:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ïóíêò ìàíöiðàâàííÿ:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Ïàðàìåòðû: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ôàðìàòàâàííå âiðòóàëüíàãà ðàçäçåëó %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Çìÿíiöü òûï ðàçäçåëó"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "ßêóþ ñiñòýìó äðóêó Âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Êóäû âû æàäàåöå ìàíöiðàâàöü âiðòóàëüíóþ ïðûëàäó %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Êóäû âû æàäàåöå ìàíöiðàâàöü ïðûëàäó %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Íåëüãà ¢ñòàëÿâàöü ïóíêò ìàíöiðàâàííÿ, òàìó øòî ðàçäåë âûêàðûñòî¢âàåööà äëÿ\n"
-"âiðòóàëüíàé ôàéëàâàé ñiñòýìû.\n"
-"Ñïà÷àòêó âûäàëiöå âiðòóàëüíóþ ñiñòýìó"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Ïàäë³ê ìåæࢠôàéëàâàé ñiñòýìû FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Çìÿíåííå ïàìåðà¢"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Ïàìåðû ÿêîãà ðàçäçåëà âû æàäàåöå çìÿíiöü?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Óñå äàäçåíûÿ ¢ ãýòûì ðàçäçåëå ïàâiííû áûöü çàðõiâàâàíûÿ"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Óñå äàäçåíûÿ ¢ ðàçäçåëå %s áóäóöü ñòðà÷àíû"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Âûáàð íîâûõ ïàìåðà¢"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Ïàìåð ó Ìá:"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Íà ÿêi äûñê ïåðàíåñö³?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Ñåêòàð"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Íà ÿêi ñåêòàð ïåðàíåñö³?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ïåðàíîñ³ì"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ïåðàíîñ³ööà ðàçäçåë..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Àáÿðûöå iñíóþ÷û RAID äëÿ äàäàííÿ"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "íîâû"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Âûáÿðûöå iñíóþ÷û LVM äëÿ äàáà¢ëåííÿ"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ãýòû ðàçäçåë íå ìîæà áûöü âûêàðûñòàíû ïàä âiðòóàëüíóþ ôàéëàâóþ ñiñòýìó"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Âiðòóàëüíàÿ ôàéëàâàÿ ñiñòýìà (loopback)"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Iìÿ âiðòóàëüíàãà ðàçäçåëó"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Óëàñíàå iìÿ"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ôàéë óæî âûêàðûñòî¢âàåööà iíøàé âiðòóàëüíàé ñiñòýìàé. Êàëi ëàñêà, \n"
-"àáÿðûöå iíøóþ íàçâó"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Ôàéë óæî iñíóå. Âûêàðûñòàöü ÿãî?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Îïöûi ìîäóëþ:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ïðûëàäà"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "óçðîâåíü"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ïàìåð áëîêó"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Áóäçüöå óâàæëiâû. Ãýòóþ àïåðàöûþ íåëüãà àäìÿíiöü"
-
-#: ../../diskdrake/interactive.pm_.c:906
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "ßêi òûï äðóêàðêi âû ìàåöå?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ïðàáà÷öå, àëå íåëüãà ñòâàðûöü /boot íà ãýòûì äûñêó (íà öûëiíäðû > 1024).\n"
-"Êàë³ âû äóìàåöå âûêàðûñòî¢âàöü LILO - òàäû ãýòà íå áóäçå ïðàöàâàöü, LILO íå "
-"âûêàðûñòî¢âàåöà, òàäû /boot íå ïàòðýáíû."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Àáðàíû äëÿ äàäàòêó ¢ ÿêàñöi êàðàí¸âàãà (/) ðàçäçåë ôiçi÷íà çíàõîäçiöà äàëåé\n"
-"1024-ãà öûëiíäðó æîðñòêàãà äûñêó, à ¢ âàñ íÿìà ðàçäçåëó /boot .\n"
-"Êàëi áóäçå âûêàðûñòî¢âàööà äûñïå÷àð çàãðóçêi LILO, íå çàïàìÿòàéöå äàäàöü\n"
-"ðàçäçåë /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Âû àáðàëi RAID ðàçäçåë ÿê êàðàí¸âû.\n"
-"Íÿìà çàãðóç÷ûêó, ÿêi á çàãðóçi¢ñÿ áåç /boot ðàçäçåëà.\n"
-"Äàäàéöå ðàçäåë /boot, êàëi ëàñêà."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Òàáëiöà ðàçìÿø÷ýííÿ ïðûëàäû %s áóäçå çàïiñàíà íà äûñê!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Êàá çìÿíåííi ¢ñòóïiëi ¢ äçåÿííå, íåîáõîäíà ïåðàçàãðóçiööà"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Óñå äàäçåíûå ¢ ðàçäçåëå %s áóäóöü ñòðà÷àíû ïàñëÿ ôàðìàòàâàííÿ"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ôàðìàòàâàííå"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ôàðìàòàâàííå âiðòóàëüíàãà ðàçäçåëó %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ôàðìàòàâàííå ðàçäçåëó %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid íå ïðàöàçäîëüíû"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Íå õàïàå ïðàñòîðû äëÿ ñòâàðýííÿ íîâûõ ðàçäçåëà¢"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Íå õàïàå ïðàñòîðû äëÿ ñòâàðýííÿ íîâûõ ðàçäçåëà¢"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Ïàìåðû ýêðàíó: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Ïðûëàäà:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ëiòàðà äëÿ DOS-äûñêó: %s (íà¢ãàä)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Òûï: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Iìÿ: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Ïà÷àòàê: ñåêòàð %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Ïàìåð: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ñåêòàðà¢"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Öûëiíäðû ç %d ïà %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Ôàðìàòàâàííå\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Íå àäôàðìàòàâàíà\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Çàìàíöiðàâàíà\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Ôàéë(û) âiðòóàëüíàé ôàéëàâàé ñiñòýìû: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Çàãðóçà÷íû ðàçäçåë ïà äàìà¢ëåííþ\n"
-"    (äëÿ çàãðóçêi MS-DOS, à íå äëÿ lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Óçðîâåíü %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ïàìåð ôðàãìåíòó %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-äûñêi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Iìÿ ôàéëó âiðòóàëüíàé ôàéëàâàé ñiñòýìû: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ïàìåð: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ãåàìåòðûÿ: %s öûëiíäðà¢, %s ãàëîâàê, %s ñåêòàðà¢\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Iíôàðìàöûÿ: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-äûñêi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Òûï òàáëiöû ðàçäçåëà¢: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "íà øûíå %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Îïöûi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Òûï ôàéëàâàé ñiñòýìû:"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ãýòû ïàðîëü çàíàäòà ïðîñòû (ÿãî äà¢æûíÿ ïàâiííà áûöü íå ìåíåé çà %d ëiòàðà¢)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Ïàðîëi íå ñóïàäàþöü"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Çìÿíiöü òûï ðàçäçåëó"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Íàö³ñí³öå íà ðàçäçåë"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ñåðâåð"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ïàìûëêà ôàðìàòàâàííÿ %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Íå âåäàþ ÿê àäôàðìàòàâàöü %s ç òûïàì %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ïàìûëêà ðàçìàíöiðàâàííÿ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ñåðâåð"
-
-#: ../../fsedit.pm_.c:467
-#, fuzzy
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Âû íå ìîæàöå ðàçáiâàöü íà ðàçäåëû, ïàìåð ÿêiõ ìåíåé çà 16 Ìá"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Âû íå ìîæàöå ðàçáiâàöü íà ðàçäåëû, ïàìåð ÿêiõ ìåíåé çà 32 Ìá"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ïóíêò ìàíöiðàâàííÿ ïàâiíåí ïà÷ûíàööà ç /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Óæî ¸ñöü ðàçäçåë ç ïóíêòàì ìàíöiðàâàííÿ %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ãýòû êàòàëîã ïàâ³íåí çíàõîäç³ööà ¢íóòðû êàðàí¸âàé ôàéëàâàé ñ³ñòýìû"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Âàì íåàáõîäíà çàäàöü ïðàâiëüíû òûï ôàéëàâàé ñiñòýìû (ext2, reiserfs)\n"
-"äëÿ ãýòàé êðîïêi ìàíöiðàâàííÿ\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Âàì íåàáõîäíà çàäàöü ïðàâiëüíû òûï ôàéëàâàé ñiñòýìû (ext2, reiserfs)\n"
-"äëÿ ãýòàé êðîïêi ìàíöiðàâàííÿ\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Íå õàïàå ïðàñòîðû äëÿ ñòâàðýííÿ íîâûõ ðàçäçåëà¢"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ïàìûëêà àäêðûööÿ %s äëÿ çàïiñó: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ïàìûëêà: äëÿ ñòâàðýííÿ íîâûõ ôàéëàâûõ ñiñòýìࢠíå çíàéäçåíû àäïàâåäíûÿ \n"
-"ïðûëàäû. Ïðàâåðöå àáñòàëÿâàííå äëÿ ïîøóêó iìàâåðíàé ïðû÷ûíû."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Âû íå ñòâàðûëi àíiÿêiõ ðàçäçåëà¢!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Äàëåé àäçíà÷àíû óñå ³ñíóþ÷ûÿ ðàçäçåëû Linux, çíîéäçåíûÿ íà âàøûì äûñêó,\n"
-" ÿê³ÿ çðîáëåíû ìàéñòðàì âûëó÷ýííÿ äûñêà¢. Âû ìîæàöå ïàê³íóöü ³õ òàê ³ "
-"âûêàðûñò¢âàöü\n"
-" äàëåé, áî ÿíû äîáðà ïàäûõîäçÿöü äëÿ çâû÷àéíàãà âûêàðûñòàííÿ. Êàë³ âû\n"
-" ¢íîñ³öå çìåíû, âû ïàâ³ííû, âûëó÷ûöü õàöÿ ðàçäçåë (\"/\"). Ðàá³öå\n"
-" ðàçäçåë íå âåëüì³ ìàëûì, áî ¢ àäâàðîòíûì âûïàäêó âû íÿ çäîëååöå óñòàëÿâàöü\n"
-" äàñòàòêîâà ïðàãðàìíàãà çàáåñïÿ÷ýííÿ.Êàë³ âû æàäàåöå çàõàâàöü âàøûÿ "
-"äàäçåíûÿ\n"
-" íà àñîáíûì ðàçäçåëå, âû ïàâ³ííû àáðàöü ïóíêò ìàíö³ðàâàííÿ \"/home\".\n"
-"\n"
-"Êîæíû ðàçäçåë ïàçíà÷àíû íàñòóïíûì ÷ûíàì \"²ìÿ\", \"Ñâîéñòâû\".\n"
-"\n"
-"\n"
-"\"²ìÿ\" êàäàâàíà òàê - \"òûï äûñêó\", \"íóìàð äûñêó\", \"íóìàð ðàçäçåëó\" \n"
-"(íàïðûêëàä, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òûï äûñêó\" êàäàâàíû ÿê \"hd\", êàë³ ãýòà IDE, ³ \"sd\" êàë³ SCSI.\n"
-"   * \"à\" \"master\" íà ïåðøàñíûì êàíàëå IDE \n"
-"   * \"b\" \"slave\" íà ïåðøàñíûì êàíàëå IDE\n"
-"   * \"c\" \"master\" íà äðóãàñíûì êàíàëå IDE\n"
-"   * \"d\" \"slave\" íà äðóãàñíûì êàíàëå IDE\n"
-"\n"
-"\n"
-"Äëÿ SCSI äûñêࢠ- \"a\" ãýòà \"ïåðøàñíû æîðñê³ äûñê\", \"b\" - \"äðóãàñíû "
-"æîðñê³ äûñê\", ³ ã.ä."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Ó ãýòûì ïóíêöå, âû ïàâ³ííû àáðàöü äçå íà âàøûì æîðñê³ì \n"
-"äûñêó óñòàëÿâàöü àïåðàöûéíóþ ñ³ñòýìó Mandrake Linux. Êàë³ äûñê ïóñòû\n"
-"àëüáî ¢ñòàëûâàíàÿ àïåðàöûéíàÿ àïåðàöûéíàÿ ñ³ñòýìà âûêàðûñòî¢âàå ¢ñþ\n"
-"äûñêàâóþ ïðàñòîðó, âû ïàâ³ííû ðàçüá³öü ÿãî íà ðàçäçåëû. Ó àñíî¢íûì,\n"
-"ðàçá³öö¸ ðàçäçåëࢠæîðñêàãà äûñêó ñêëàäàåööà ç ëàã³÷íàãà äçÿëåííÿ ÿãî\n"
-"äûñêàâàé ïðàñòîðû äçåëÿ ¢ñòàëÿâàííÿ âàøàé íîâàé ñ³ñòýìû Mandrake Linux.\n"
-"\n"
-"Òàìó ÿê âûí³ê³ ðàçá³ööÿ ðàçäçåëࢠçâû÷àéíà íåçâàðîòíûÿ, ãýòû ïðàöýñ \n"
-"ìîæà áûöü ïóæàþ÷ûì ³ íàïðóæàíûì, êàë³ âû íåâîïûòíû êàðûñòàëüí³ê. Ãýòû\n"
-"ìàéñòàð ñïðàø÷àå ãýòû ïðàöýñ. Ïåðàä òûì ÿê ïà÷àöü çâÿðí³öåñÿ, êàë³\n"
-"ëàñêà, äà äàâåäê³.\n"
-"\n"
-"Âàì ïàòðýáíà, ñàìà ìàëà, äâà ðàçäçåëû. Ïåðøû íåïàñðýäíà äëÿ àïåðàöûéíàé\n"
-"ñ³ñòýìû, ³ äðóã³ äëÿ â³ðòóàëüíàé ïàìÿö³ (Swap - ðàçäçåë).\n"
-"\n"
-"Êàë³ ðàçäçåëû ¢æî âûçíà÷àíû (ó ïàïÿðýäíÿå ¢ñòàëÿâàííå ö³ ³íøûì \n"
-"³íñòðóìàíòàì âûçíà÷ýííÿ ðàçäçåëà¢), âû ïàâ³ííû àáðàöü òûÿ, ÿê³ÿ æàäàåöå\n"
-"âûêàðûñòî¢âàöü äëÿ ¢ñòàëÿâàííÿ ñ³ñòýìû.\n"
-"\n"
-"\n"
-"Êàë³ ðàçäçåëû íå áûë³ âûçíà÷àíû, âû ïàâ³ííû ³õ ñòâàðûöü. Êàá çðàá³öü \n"
-"ãýòà, ñêàðûñòàéöå ìàéñòðà, äàñòóïíàãà âûøýé. Ó çàëåæíàñö³ àä \n"
-"êàíô³ãóðàöû³ æîðñòêàãà äûñêó, ìîãæà áûöü çðîáëåíà íàñòóïíàå:\n"
-"\n"
-"* Âûêàðûñòàííå ³ñíóþ÷àãà ðàçäçåëó: ìàéñòàð çíàéøî¢ àäç³í ö³ íåêàëüê³.\n"
-"³ñíóþ÷ûõ ðàçäçåëࢠíà âàøûì æîðñê³ì äûñêó. Êàë³ âû æàäàåöå ³õ çàõàâàöü,\n"
-"àáÿðûöå ãåòóþ îïöûþ.\n"
-"\n"
-"\n"
-"* Ïî¢íàÿ à÷ûñòêà äûñêó: àáÿðûöå ãýòà, êàë³ âû æàäàåöå âûäàë³öü óñåäàäçåíûÿ ³ "
-"ðàçäçåëû ÿê³ÿ ³ñíóþöü\n"
-" íà âàøûì äûñêó ³ çàìÿí³öü íà Mandrake Linux. Áóäçöå óâàæë³âû ç ãýòàéîïöûÿé, "
-"áî ãýòû ïðàöýñ íåçâàðîòíû.\n"
-"\n"
-"\n"
-"* Âûêàðûñòàííå âîëüíàé ïðàñòîðû íà ðàçäçåëå Windows: êàë³ MicrosoftWindows "
-"óñòàëÿâàíà íà âàøûì æîðñê³ì\n"
-" äûñêó ³ âûêàðûñòî¢âàå ¢ñþ äàñòóïíóþ ïðàñòîðó, âû ïàâ³ííû ñòâàðûöüâîëüíóþ "
-"ïðàñòîðó äëÿ äàäçåíûõ Linux\n"
-"Êàá çðàá³öü ãýòà, âû ìîæàöå âûäàëÿöü âàø ðàçäçåë Windows ³ äàäçåíûÿ(ãë."
-"\"À÷ûñòêà óñÿãî äûñêó\" àëüáî\n"
-" \"Ðýæûì ýêñïåðòó\") àëüáî çìÿí³öü ïàìåðû âàøàãà ðàçäçåëó WindowsÇìÿíåííå "
-"ïàìåðࢠìîæà áûöü âûêàíàíà\n"
-" áåç ñòðàòû äàäçåíûõ. Ãýòàÿ îïöûÿ ðýêàìåíäóåööà, êàë³ âû "
-"æàäàåöåâûêàðûñòî¢âàöü Mandrake Linux ³\n"
-" Microsoft Windows íà àäíûì ³ òûì æà  êàìï'þòýðû.\n"
-"\n"
-" Ïåðàä âûáàðàì ãýòàãà, êàë³ ëàñêà, çüâÿðí³öå ¢âàãó, íà òîå, øòîêîëüêàñüöü "
-"äàñòóïíàé âîëüíàé\n"
-" ïðàñòîðû ïàä Microsoft Windows çìåíøûööà.\n"
-"\n"
-"\n"
-"* Ðýæûì ýêñïåðòó: âû ìîæàöå àáðàöü ãýòóþ îïöûþ, êàë³ âû æàäàåöåðàçá³öü "
-"ðàçäçåëû óëàñíà ðóêàì³.\n"
-" Áóäçöå ¢âàæë³âûÿ àá³ðàþ÷û ãýòà. Ãýòàÿ îïöûÿ ìàãóòíàÿ àëå äàâîë³íåáÿñïå÷íàÿ, "
-"âû ìîæàöå\n"
-" ë¸ãêà çãóá³öü ñâàå äàäçåíûÿ. Òàìó íå àá³ðàéöå ãýòóþ îïöûþ êàë³ âûíå âåäàåöå "
-"øòî ðîá³öå."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Óñå ðàçäçåëû, ÿê³ÿ áûë³ òîëüê³ âûçíà÷àíû ïàâ³ííû áûöü\n"
-"àäôàðìàòàâàíû (ôàðìàòàâàöü - çíà÷ûöü ñòâàðûöü ôàéëàâàþ ñ³ñòýìó).\n"
-"\n"
-"\n"
-"Ó òîé æà ÷àñ, âû ìîæàöå ïåðàôàðìàòàâàöü óæî ³ñíóþ÷ûÿ ðàçäçåëû, êàá ñö¸ðö³\n"
-"äàäçåíûÿ ÿê³ÿ ÿíû ¢òðûìë³âàþöü. Êàë³ âû æàäàåöå çðàá³öü ãýòà, àáÿðûöå "
-"ðàçäçåëû\n"
-"ÿê³ÿ æàäàåöå àäôàðìàòàâàöü.\n"
-"\n"
-"\n"
-"Çà¢âàæöå, âû ïàâ³ííû ïåðàôàðìàòàâàöü óñå ñòâîðàíûÿ ðàçäçåëû. Âû ïàâ³ííû\n"
-"ïåðàôàðìàòàâàöü ðàçäçåëû, ÿê³ÿ ¢òðûìë³âàþöü àïåðàöûéíóþ ñ³ñòýìó (òûïó \"/"
-"\",\n"
-"\"/usr\" ö³ \"/var\"), àëå íå ïàâ³ííû ïåðàôàðìàòàâàöü ðàçäçåëû, ÿê³ÿ "
-"óòðûìë³âàþöü\n"
-"äàäçåíûÿ, ÿê³ÿ âû æàäàåöå çàõàâàöü (çâû÷àéíà /home).\n"
-"\n"
-"\n"
-"Êàë³ ëàñêà, áóäçöå ¢âàæë³âûÿ, àá³ðàþ÷û ðàçäçåëû, áî ïàñëÿ ôàðìàòàâàííÿ\n"
-"óñå äàäçåíûÿ áóäóöü íåçâàðîòíà âûäàëåíûÿ.\n"
-"\n"
-"\n"
-"Íàö³ñí³öå \"Òàê\" êàë³ âû ãàòîâûÿ ôàðìàòàâàöü ðàçäçåëÿ.\n"
-"\n"
-"\n"
-"Íàö³ñí³öå \"Àäìåíà\" êàë³ æàäàåöå àáðàöü ³íøûÿ ðàçäçåëû äëÿ "
-"óñòàëÿâàííÿâàøàé\n"
-"íîâàé àïåðàöûéíàé ñ³ñòýìû Mandrake Linux."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Âàøà íîâàÿ àïåðàöûéíàÿ ñ³ñòýìà Mandrake Linux çàðàç óñòà븢âàåööà.\n"
-"Ãýòà àïåðàöûÿ àäûìå ïý¢íû ÷àñ(øòî çàëåæûöü àä ïàìåðó àáðàíàãà ¢ñòàëÿâàííÿ ³ "
-"õóòêàñö³\n"
-" êàìï'þòýðó) .\n"
-"\n"
-"\n"
-"Êàë³ ëàñêà, ïà÷àêàéöå."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Íà âàøûì äûñêó áûëî çíîéäçåíà áîëåé çà àäç³í ðàçäçåë\n"
-"Windows. Êàë³ ëàñêà, àáÿðûöå òîé, ïàìåð ÿêîãà æàäàåöå çìÿí³öü, "
-"êàáóñòàëÿâàöü\n"
-"ñ³ñòýìó Mandrake Linux.\n"
-"\n"
-"\n"
-"Äëÿ iôàðìàöû³, êîæíû ðàçäçåë àäçíà÷àíû ÿê: \"Linux ³ìÿ\", \"Windows\n"
-"³ìÿ\" \"Câîéñòâû\".\n"
-"\"Linux ²ìÿ\" êàäàâàíà òàê - \"òûï äûñêó\", \"íóìàð äûñêó\",\"íóìàð "
-"ðàçäçåëó\n"
-"(íàïðûêëàä, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òûï äûñêó\" êàäàâàíû ÿê \"hd\", êàë³ ãýòà IDE, ³ \"sd\" êàë³ SCSI.\n"
-"\n"
-"\"Íóìàð äûñêó\" - ñ³ìâàë ïàñëÿ \"hd\" ö³ \"sd\". Äëÿ IDE äûñêà¢:\n"
-"   * \"à\" \"master\" íà ïåðøàñíûì êàíàëå IDE \n"
-"   * \"b\" \"slave\" íà ïåðøàñíûì êàíàëå IDE\n"
-"   * \"c\" \"master\" íà äðóãàñíûì êàíàëå IDE\n"
-"   * \"d\" \"slave\" íà äðóãàñíûì êàíàëå IDE\n"
-"\n"
-"\n"
-"Äëÿ SCSI äûñêࢠ- \"a\" ãýòà \"ïåðøàñíû æîðñê³ äûñê\", \"b\" - \"äðóãàñíû "
-"æîðñê³ äûñê\", ³ ã.ä.\n"
-"\n"
-"\"Windows ²ìÿ\" ñ³ìâàë âàøàãà äûñêó ¢ Windows (ïåðøû äûñê ö³\n"
-"ðàçäçåë ïàçíà÷àåööà ÿê \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Êàë³ ëàñêà, ïà÷àêàéöå. Ãýòàÿ àïåðàöûÿ àäûìå ïý¢íû ÷àñ."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Êàë³ ëàñêà, íàö³ñí³öå \"Óñòà븢êà\" êàë³ íå ìàåööà àí³ÿêàé ïàïÿðýäíÿéâåðñ³³ "
-"Mandrake Linux\n"
-"àëüáî âû æàäàåöå âûêàðûñòî¢âàöü íåêàëüê³ àïåðàöûéíûõ ñ³ñòýìà¢.\n"
-"\n"
-"\n"
-"Ó çàëåæíàñö³ àä âàøûõ âåäࢠGNU/Linux, âû ìîæûöå àáðàöü àäç³í ç íàñòóïíûõ "
-"êëàñà¢, êàá óñòà븢âàöü ³ ìàäûô³êàâàöü \n"
-"âàøóþ àïåðàöûéíóþ ñ³ñòýìó Mandrake Linux:\n"
-"\n"
-"* Ðýêàìåíäàâàíà: àáÿðûöå ãýòû êëàñ, êàë³ âû í³êîë³ íå ¢ñòà븢âàë³GNU/Linux. "
-"Óñòàëÿâàííå áóäçå âåëüì³ ïðîñòûì,\n"
-" âàì áóäçå çàäàíà òîëüê³ íåêàëüê³ ïûòàííÿ¢.\n"
-"\n"
-"\n"
-"* Ïà âûáàðó: êàë³ âû äàñòàòêîâà çíà¸ìûÿ ç GNU/Linux, âû ìîæàöå çðàá³öü âûáàð "
-"ì³æ âûêàðûñòàííåì ñ³ñòýìû ÿê Ïðàöî¢íàÿ\n"
-" ñòàíöûÿ, Ñåðâåð, Ðàñïðàöî¢êà. Âû ïàâ³ííû áóäçåöå àäêàçàöü íà áîëüøóþ "
-"êîëüêàñöü ïûòàííÿ¢ ÷ûì ïàä ÷àñ óñòàëÿâàííÿ\n"
-" êëàñó \"Ðýêàìýíäàâàíà\", òàìó âû ïàâ³ííû âåäàöü, ÿê ïðàöóå GNU/Linux, êàá "
-"àáðàöü ãýòû êëàñ óñòàëÿâàííÿ.\n"
-"\n"
-"\n"
-"* Ýêñïåðò: âû ìîæàöå àáðàöü ãýòû êëàñ, êàë³ âû ìàåöå äîáðûÿ âåäû ¢ GNU/"
-"Linux. ßê ³ ïðû ¢ñòàëÿâàíí³ êëàñó\n"
-" \"Íàñòðîåíà\", âû ìîæàöå çðàá³öü âûáàð ì³æ âûêàðûñòàííåì ñ³ñòýìû ÿê "
-"Ïðàöî¢íàÿ ñòàíöûÿ, Ñåðâåð,\n"
-" Ðàñïðàöî¢êà. Áóäçüöå âåëüì³ àñöÿðîæíûÿ ïåðàä òûì, ÿê àáðàöü ãýòû êëàñ "
-"óñòàëÿâàííÿ. Âû áóäçåöå çäîëüíûÿ âûêàíàöü óñòàëÿâàííå ¢\n"
-" àäïàâåäíàñö³ ç âàøûì³ æàäàííÿì³. Àäêàçû íà íåêàòîðûÿ ïûòàíí³ ìîãóöü áûöü "
-"âåëüì³ ñêëàäàíûì³, êàë³ âû íå ìàåöå äîáðûõ âåäࢠó GNU/Linux.\n"
-" Òàìó íå àá³ðàéöå ãýòû êëàñ ³íñòàëÿöû³, êàë³ âû íå âåäàåöå òîå, øòî ðîá³öå."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (àä LInux LOader) i Grub - ãýòà çàãðóç÷ûêi. ßíû ìîãóöü çàãðóçiöü "
-"äðóãóþ\n"
-"GNU/Linux öi ëþáóþ iíøóþ àïåðàöûéíóþ ñiñòýìó, óñòàëÿâàíóþ íà êàìïóòàðû.\n"
-"Çâû÷àéíà, ãýòûÿ iíøûÿ àïåðàöûéíûÿ ñiñòýìû êàðýêòíà âûçíà÷àþööà i\n"
-"¢ñòà븢âàþööà. Êàëi ãýòà íå àòðûìàëàñÿ, òî âû ìîæàöå äàäàöü ëþáû çàïiñ\n"
-"ñàìàñòîéíà. Áóäçüöå ¢ïý¢íåíû, øòî âû çàäàëi êàðýêòíûÿ ïàðàìåòðû.\n"
-"\n"
-"\n"
-"Òàêñàìà âû ìîæàöå ïàæàäàöü i íå äàáà¢ëÿöü iíøûÿ àïåðàöûéíûÿ ñiñòýìû.\n"
-"Ó òàêiì âûïàäêó ïàòðýáíà âûäàëiöü àäïàâåäíûÿ çàïiñû. Àëå æ òàäû âàì \n"
-"ïàòðýáíà áóäçå çàãðóçà÷íàÿ äûñêåòà, êàá çàãðóçiööà!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Íåàáõîäíà ïàçíà÷ûöü, äçå âû æàäàåöå ðàçìÿñöiöü iíôàðìàöûþ, ÿêàÿ íåàáõîäíà\n"
-"äëÿ çàãðóçêi Linux.\n"
-"\n"
-"\n"
-"Êàëi âû íå àä÷óâàåöå àáñàëþòíà äàêëàäíà, øòî âû ðîáiöå, \n"
-"àáÿðûöå \"Ïåðøû ñåêòàð íà äûñêó (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Àáÿðûöå æîðñê³ äûñê ÿê³ æàäàåöå à÷ûñö³öü äëÿ ¢ñòàëÿâàííÿ\n"
-"íîâàãà ðàçäçåëó Mandrake Linux. Áóäçöå ¢âàæë³âûÿ, óñå äàäçåíûÿ íà äûñêó "
-"áóäóöü\n"
-" çí³ø÷àíû ³ ³õ íåìàã÷ûìà áóäçå àäíàâ³öü."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Íàö³ñí³öå \"Òàê\", êàë³ æàäàåöå âûäàë³öü óñå äàäçåíûÿ\n"
-"³ ðàçäçåëû íà ãýòûì äûñêó. Áóäçöå óâàæë³âûÿ, ïàñëÿ ãýòàé àïåðàöû³ âû íå\n"
-"\n"
-"çäîëååöå àäíàâ³öü ëþáûÿ äàäçåíûÿ ³ ðàçäçåëû, óë³÷âàþ÷û ³ äàäçåíûÿ Windows\n"
-"\n"
-"\n"
-"Íàö³ñí³öå \"Àäìåíà\" êàá àäìÿí³öü àïåðàöûþ áåç ñòðàòû äàäçåíûõ ³ ðàçäçåëà¢"
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Íåìàã÷ûìà âûêàðûñòî¢âàöü broadcast áåç äàìåíà NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ïàìûëêà ÷ûòàííÿ ôàéëó %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Ïý¢íàå àáñòàëÿâàííå ïàòðàáóå êàìåðöûéíûõ äðàéâåðࢠäëÿ ïðàöû.\n"
-"×àñòêîâà ³íôàðìàöûþ ïðà ³õ ìîæíà àòðûìàöü òóò: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Âû ïàâiííû ìåöü êàðàí¸âû ðàçäçåë.\n"
-"Äëÿ ãýòàãà ñòâàðûöå ðàçäçåë (àëüáî àäçíà÷öå ¢æî iñíóþ÷û).\n"
-"Ïîòûì àáÿðûöå ``Êðîïêà ìàíöiðàâàííÿ'' i ¢ñòàíàâiöå ÿå ¢ `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Âû ïàâiííû ìåöü ðàçäçåë swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Íÿìà ðàçäçåëà swap.\n"
-"\n"
-"Óñ¸ àäíî ïðàöÿãâàöü?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Âû ïàâiííû ìåöü ðàçäçåë swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Âûêàðûñòî¢âàöü íåçàíÿòóþ ïðàñòîðó"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Íå õàïàå ïðàñòîðû äëÿ ñòâàðýííÿ íîâûõ ðàçäçåëà¢"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Âûêàðûñòî¢âàöü iñíóþ÷û ðàçäçåë"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Íÿìà iñíóþ÷ûõ ðàçäçåëà¢, ÿêiÿ ìîæíà âûêàðûñòàöü"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Âûêàðûñòî¢âàöü ðàçäçåë Windows äëÿ âiðòóàëüíàé ôàéëàâàé ñiñòýìû"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ïàìåðû ÿêîãà ðàçäçåëà âû æàäàåöå çìÿíiöü?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Âûáàð ïàìåðà¢"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Êàðàí¸âû ðàçäçåë ¢ Má: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ïàìåð swap ðàçäçåëó ¢ Má:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Âûêàðûñòî¢âàöü íåçàíÿòóþ ïðàñòîðó íà ðàçäçåëå Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Ïàìåðû ÿêîãà ðàçäçåëà âû æàäàåöå çìÿíiöü?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Âûëi÷ýííå ìåæࢠôàéëàâàé ñiñòýìû Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Ó ïðàãðàìû çìåíû ïàìåðࢠðàçäçåëà FAT íå àòðûìàëàñÿ\n"
-"àïðàöàâàöü Âàø ðàçäçåë, ïàìûëêà: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Âàø ðàçäçåë ç Windows çàíàäòà ôðàãìåíòàâàíû. \n"
-"Ðýêàìåíäóåì ñïà÷àòêó çàïóñöiöü ïðàãðàìó ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÓÂÀÃÀ!\n"
-"\n"
-"DrakX çàðàç ïàâiíåí çìÿíiöü ïàìåð âàøàãà ðàçäçåëà Windows.\n"
-"Áóäçüöå ¢âàæëiâû: ãýòàÿ àïåðàöûÿ íåáÿñïå÷íà. Êàëi âû  ÿø÷ý íå çðàáiëi \n"
-"ðýçåðâîâóþ êîïiþ äàäçåíûõ, òî ñïà÷àòêó ïàêiíüöå ïðàãðàìó ¢ñòàëÿâàííÿ,"
-"âûêàíàéöå scandisk i defrag íà ãýòûì ðàçäåëå, çðàáiöå ðýçåðâîâóþ êîïiþ\n"
-"äàäçåíûõ i òîëüêi ïîòûì çíî¢ âÿðíiöåñÿ äà ïðàãðàìû ¢ñòàëÿâàííÿ.\n"
-"Êàëi ïàäðûõòàâàëiñÿ, íàöiñíiöå Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "ßêóþ ïðàñòîðó çàõàâàöü äëÿ Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Ðàçäçåë %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "À¢òàçìÿíåííå ïàìåðࢠíå àòðûìàëàñÿ äëÿ ðàçäçåëó FAT %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Íå çíîéäçåíà ðàçäçåëࢠFAT äëÿ çìÿíåííÿ ïàìåðࢠàëüáî âûêàðûñòàííÿ\n"
-"¢ ÿêàñöi âiðòóàëüíàé ôàéëàâàé ñiñòýìû (öi íåäàñòàòêîâà ïðàñòîðû íà äûñêó)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Ñö¸ðöi äàäçåíûÿ íà ¢ñiì äûñêó"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Âûäàëiöü Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Íà ÿêi ç ìàþ÷ûõñÿ æîðñòêiõ äûñêࢠÂû æàäàåöå ¢ñòàëÿâàöü Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Óñå iñíóþ÷ûÿ ðàçäçåëû íà äûñêó %s i äàäçåíûÿ íà iõ áóäóöü ñòðà÷àíû"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Âûêàðûñòî¢âàöü iñíóþ÷û ðàçäçåë"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Âûêàðûñòî¢âàöü fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Âû ìîæàöå öÿïåð ðàçáiöü âàø äûñê %s\n"
-"Ïà çàêàí÷ýííi íå çàáóäçüöåñÿ çàõàâàöü çìÿíåííi, ñêàðûñòà¢øû `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Âûêàðûñòî¢âàöü íåçàíÿòóþ ïðàñòîðó íà ðàçäçåëå Windows"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Äàäàöü ðàçäçåë íåìàã÷ûìà"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ìàéñòàð ïàäðûõòî¢êi ðàçäçåëࢠDrakX çíàéøî¢ íàñòóïíûÿ âàðûÿíòû:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ïàäðûõòî¢êà ðàçäåëࢠíå ¢äàëàñÿ: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Äàëó÷ýííå äà ñåòêi"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Àäëó÷ýííå àä ñåòêi"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Óçíiêëà ïàìûëêà, ÿêóþ íå àòðûìë³âàåööà êàðýêòíà àïðàöàâàöü,\n"
-"òàìó ïðàöÿãâàéöå íà ñâàþ ðûçûêó."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äóáëÿâàííå ïóíêòó ìàíöiðàâàííÿ %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Íåêàòîðûÿ âàæíûÿ ïàêåòû íå áûëi ¢ñòàëÿâàíû êàðýêòíà.\n"
-"Äðóãi âàø cdrom äûñê öi âàø cdrom ìàþöü äýôåêòû.\n"
-"Ïðàâåðöå cdrom íà âàøûì êàìïóòàðû, âûêàðûñòî¢âàþ÷û\"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Сард�чна запрашаем у %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Äûñêàâîä íåäàñòóïíû"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ïåðàõîä íà êðîê `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ó Âàøàé ñiñòýìå ìàåööà íåäàõîï ðýñóðñà¢, òàìó ìàã÷ûìû ïðàáëåìû\n"
-"ïðû ¢ñòàëÿâàííi Mandrake Linux. Ó ãýòûì âûïàäêó ïàñïðàáóéöå òýêñòàâóþ\n"
-"ïðàãðàìó ¢ñòàëÿâàííÿ. Äëÿ ãýòàãà íàöiñíiöå `F1' ó ÷àñ çàãðóçêi, à ïîòûì\n"
-"íàáÿðûöå `text' i íàöiñíiöå <ENTER>."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Êëàñ Óñòàëÿâàííÿ"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Êàëi ëàñêà, àáÿðûöå àäçií ç êëàñࢠóñòàëÿâàííÿ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Àãóëüíû ïàìåð äëÿ àáðàíûõ ãðóïࢠïðûáëiçíà ðî¢íû %d Ìá.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Êàëi âû æàäàåöå ¢ñòàëÿâàöü ìåíåé ãýòàãó ïàìåðó,\n"
-"àáÿðûöå àäñîòàê ïàêåòà¢, ÿêi âû æàäàåöå ¢ñòàëÿâàöü.\n"
-"\n"
-"Ïðû íiçêiì àäñîòêó áóäóöü óñòàëÿâàíû òîëüêi íàéáîëüø âàæíûÿ ïàêåòû,\n"
-"à ïðû 100% áóäóöü óñòàëÿâàíû ¢ñå àáðàíûÿ ïàêåòû."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Íà âàøûì äûñêó ¸ñöü ìåñöà òîëüêi äëÿ %d%% ãýòûõ ïàêåòà¢.\n"
-"\n"
-"Êàëi âû æàäàåöå ¢ñòàëÿâàöü ìåíåé ãýòàãà, òî\n"
-"ïàçíà÷öå àäñîòàê ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ.\n"
-"Ïðû ìàëûì àäñîòêó áóäóöü óñòàëÿâàíû íàéáîëüø âàæíûÿ ïàêåòû;\n"
-"ïðû àäñîòêó %d%% áóäçå ¢ñòàëÿâàíà ñòîëüêi ïàêåòࢠêîëüêi ìàã÷ûìà."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Áîëüø äàêëàäíû âûáàð ìîæíà áóäçå çðàáiöü íà íàñòóïíûì êðîêó."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Àäñîòàê ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Âûáàð ãðóïû ïàêåòà¢"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Àñàáiñòû âûáàð ïàêåòà¢"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Àãóëüíû ïàìåð: %d / %d Má"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Äðýííû ïàêåò"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Iìÿ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Âåðñiÿ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ïàìåð: %d Ká\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Çíà÷íàñöü: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Âû íå ìîæàöå âûáðàöü ãýòû ïàêåò, òàìó ÿê íå õàïàå ìåñöà äëÿ ÿãî ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Íàñòóïíûÿ ïàêåòû áóäóöü äàäàíû äà ñiñòýìû"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Íàñòóïíûÿ ïàêåòû áóäóöü âûäàëåíû"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Âû íå ìîæàöå âûëó÷àöü ³ àäìÿíÿöü âûëó÷ýííå ãýòàãà ïàêåòó"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ãýòà àáàâÿçêîâû ïàêåò, ÿãî âûëó÷ýííå íåëüãà àäìÿíiöü"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Âû íå ìîæàöå àäìÿíiöü âûëó÷ýííå ãýòàãà ïàêåòó. ¨í óæî ¢ñòàëÿâàíû"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ãýòû ïàêåò ïàâiíåí áûöü àáíî¢ëåíû\n"
-"Âû ¢ïý¢íåíû, øòî õî÷àöå àäìÿíiöü âûëó÷ýííå?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Âû íå ìîæàöå àäìÿíiöü âûëó÷ýííå ãýòàãà ïàêåòó. ßãî ïàòðýáíà àáíàâiöü"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Óñòà븢êà"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Çàõàâàííå íà äûñêåòó"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Àñàáiñòû âûáàð ïàêåòà¢"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Âûäàëiöü ç ñiñòýìû"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Óñòà븢âàåì"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "×àêàåööà"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Çàñòàëîñÿ ÷àñó "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Ïàäðûõòî¢êà ¢ñòàëÿâàíüíÿ"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ïàêåòà¢"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Óñòàëÿâàííå ïàêåòó %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Ïðûíÿöü"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Àäêàçàöü"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Çìÿíiöå âàø Cd-Rom!\n"
-"\n"
-"Êàëi ëàñêà, óñòà¢öå Cd-Rom, ïàçíà÷àíû \"%s\", ó âàø äûñêàâîä i íàöiñíiöå Oê "
-"ïàñëÿ.\n"
-"Êàëi âû íå ìàåöå ÿãî, íàöiñíiöå Àäìÿíiöü, êàá àäìÿíiöü óñòàëÿâàííå ç ãýòàãà "
-"Cd."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Óñ¸ ðî¢íà ïðàöÿãâàöü?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Àòðûìàëàñÿ ïàìûëêà ¢ïàðàäêàâàííÿ ïàêåòà¢:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Àòðûìàëàñÿ ïàìûëêà ¢ïàðàäêàâàííÿ ïàêåòà¢:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Àäáûëàñÿ ïàìûëêà"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "˳öýíç³éíàÿ äàìîâà"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Êëàâiÿòóðà"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Êàëi ëàñêà, àáÿðûöå òûï êëàâiÿòóðû."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "ßêi êëàñ óñòàëÿâàííÿ âû æàäàåöå?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "Óñòà븢êà"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Àáÿðûöå ¢ñòàëÿâàííå öi àáíà¢ëåííå"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Ðýêàìåíäàâàíà"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ýêñïåðò"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Àñàáiñòû âûáàð ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "êàëi ëàñêà, ïàçíà÷öå òûï âàøàé ìûøû."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Ïîðò ìûøû"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Êàëi ëàñêà, ïàçíà÷öå ïîñëÿäî¢íû ïîðò, äà ÿêîãà ïàäêëþ÷àíà âàøàÿ ìûø."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Íàñòðîéêà êàðò PCMCIA ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Íàñòðîéêà IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "íÿìà äàñòóïíûõ ðàçäçåëà¢"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Àáÿðûöå ïóíêòû ìàíöiðàâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Òàáëiöà ðàçäçåëࢠíå ÷ûòàåööà, ÿíà çàíàäòà ñàïñàâàíàÿ äëÿ ìåíÿ :(\n"
-"Ïàñïðàáóþ iñöi äàëåé i áóäó ïðàïóñêàöü äðýííûÿ ðàçäçåëû (Óñå ÄÀÄÅÇÅÍÛß\n"
-"áóäóöü ñòðà÷àíû!). Iíøàå ðàøýííå íå äàçâîëiöü DrakX çìÿíiöü òàáëiöó "
-"ðàçäçåëà¢.\n"
-"(ïàìûëêà ¢ %s)\n"
-"\n"
-"Öi æàäàåöå ñòðàöiöü óñå ðàçäçåëû?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake íå çìîã ïðàâiëüíà ïðà÷ûòàöü òàáëiöó ðàäçåëà¢.\n"
-"Ïðàöÿãâàéöå òîëüêi íà ñâàþ ðûçûêó!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Êàðàí¸âû ðàçäçåë íå çíîéäçåíû"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Êàðàí¸âû ðàçäçåë"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "ßêi ðàäçåë êàðàí¸âû (/) äëÿ âàøàé ñiñòýìû?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Êàá ìàäûôiêàöûÿ òàáëiöû ðàçäçåëࢠçäåéñíiëàñÿ, ïàòðýáíà ïåðàçàãðóçêà."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Âûáàð ðàçäçåëࢠäëÿ ôàðìàòàâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ïðàâåðûöü íà íàÿ¢íàñöü äðýííûõ áëîêà¢?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ôàðìàòàâàííÿ ðàçäçåëà¢"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Ñòâàðýííå i ôàðìàòàâàííå ôàéëà %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Íå õàïàå ìåñöà ¢ áóôåðû ïàäêà÷êi (swap) äëÿ ¢ñòàëÿâàííÿ, ïàâÿëi÷öå ÿãî."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ïðàãëÿä äàñòóïíûõ ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ïîøóê ïàêåòࢠäëÿ àáíà¢ëåííÿ"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Âàøà ñiñòýìà íå ìàå äàñòàêîâà ìåñöà äëÿ ¢ñòàëÿâàííÿ öi àáíà¢ëåííÿ (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Ïî¢íû (%dMá)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Ìiíiìàëüíû (%dMá)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ðýêàìåíäàâàíà (%dÌá)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Àäíà¢ëåííå ç äûñêåòû"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Àäíà¢ëåííå ç äûñêåòû"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Âûáàð ãðóïû ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Çàõàâàííå íà äûñêåòó"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Âûáàð ïàêåòࢠäëÿ óñòàëÿâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "×àêàéöå"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Êàëi âû ìàåöå ¢ñå CD äûñêi ñà ñïiñà íiæýé, íàöiñíiöå Îê.\n"
-"Êàëi âû íå ìàåöå àíi âîäíàãà ç ãýòûõ CD äûñêà¢, íàöiñíiöå Àäìÿíiöü.\n"
-"Êàëi íåêàòîðûõ ç CD äûñêࢠíå ìàåöå, àäìÿíiöå iõ âûäçÿëåííå i íàöiñíiöå Îê."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ïàçíà÷àíû \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ïàäðûõòî¢êà ¢ñòàëÿâàíüíÿ"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Óñòàëÿâàííå ïàêåòó %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Íàñòðîéêà ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Çàðàç âû ìàåöå ìàã÷ûìàñöü çàãðóçiöü ïðàãðàìû äëÿ øûôðàâàííÿ.\n"
-"\n"
-"ÓÂÀÃÀ:\n"
-"\n"
-"Ç-çà àãóëüíûõ àáìåæàâàííÿ¢ íà ïðàãðàìû ãýòêàãà ðîäó i ðîçíûõ ïàíÿööÿ¢\n"
-"ó ðîçíûõ çàêîíàäà¢ñòâàõ, ïðàäàâåö i/àëüáî êàðûñòàëüíiê ãýòûõ ïðàãðàì "
-"ïàâiíåí\n"
-"óïý¢íiööà ¢ òûì, øòî çàêîíû ÿãî/iõ äçÿðæàâࢠäàçâàëÿþöü çàãðóæàöü, "
-"çàõî¢âàöü\n"
-"i/àëüáî âûêàðûñòî¢âàöü ãýòûÿ ïðàãðàìû.\n"
-"\n"
-"Àêðàìÿ òàãî, ïðàäàâåö i/àëüáî êàðûñòàëüíiê ïàâiííû áûöü óïý¢íåíû, øòî íå "
-"ïàðóøàþöü\n"
-"çàêîíࢠñâà¸é êðàiíû. Êàëi ïðàäàâåö i/àëüáî êàðûñòàëüíiê ïàðóøàå ãýòûÿ\n"
-"çàêîíû, ÿêiÿ ìîãóöü áûöü ñêàðûñòàíûÿ ñóïðàöü ÿãî, ¸í/ÿíû íÿñå àäêàçíàñöü\n"
-"\n"
-"Íi ¢ ÿêiì ðàçå íi Mandrakesoft, íi ÿå âûêàíà¢öû i ïàñòà¢ø÷ûêi íå àäêàçâàþöü\n"
-"çà íåïàñðýäíóþ, íåïðàìóþ àëüáî âûïàäêîâóþ øêîäó (øòî óêëþ÷àå, àëå \n"
-"íå àáìÿæî¢âàåööà ñòðà÷àíûì³ ïðûáûòêàì, ïàðóøýííå áiçíýñó, ñòðàòàé "
-"êàìåðöûéíûõ \n"
-"äàäçåíûõ i iíøûìi ñòðàòàìi, à òàêñàìà ìàã÷ûìûìi ñàíêöûÿìi i øòðàôàìi, ÿêiÿ \n"
-"íàëåæûöü âûïëàöiöü ïà ïàñòàíîâå ñóäó), ÿêiÿ âûöÿêàþöü ç êàðûñòàííÿ, \n"
-"âàëîäàííÿ, àëüáî ïðîñòà çàãðóçêi ç ñåòêi ïðàãðàì, äà ÿêiõ ïðàäàâåö àëüáî\n"
-"êàðûñòàëüíiê àòðûìàëi äîñòóï ïàñëÿ ïàäïiñàííÿ ãýòàãà ïàãàäíåííÿ.\n"
-"\n"
-"Ãýòàå ïàãàäíåííå ¢ ïåðøóþ ÷àðãó àäêàçâàå çàêîíàäà¢ñòâó Ôðàíöûi, çà "
-"âûêëþ÷ýííåì\n"
-"âûïàäêà¢, ÿêiÿ ñïåöûÿëüíà ðýãëàìåíòóþööà ìÿñöîâûì çàêîíàäà¢ñòâàì ó ìåæàõ\n"
-"ãðàìàäçÿíñêàãà ïðàâà. Àäíàê äàäçåíàå ïàãàäíåííå êàòýãàðû÷íà àáâÿðãàå ëþáûÿ\n"
-"íåñóàäíîñiíû çàêîíàäà¢ñòâà¢, ïðûíöûïà¢, àëüáî ïðûìÿíåííå àä ïðîöiëåãëàãà.\n"
-"Òàêiì ÷ûíàì, çàêîíû Ôðàíöûi áóäóöü ïðýâàëiðàâàöü íàä ëþáûìi iíøûìi "
-"ìÿñöîâûìi\n"
-"çàêîíàìi.\n"
-"\n"
-"Ç ëþáûìi ïûòàííÿìi, ÿêiÿ äàòû÷àööà äàäçåííàãà ïàãàäíåííÿ, çâÿðòàéöåñÿ: \n"
-"Mandrakesoft\n"
-"43, rue d'Aboukir\n"
-"75002 Paris\n"
-"FRANCE"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Ñóâÿçü ç ëþðàì äëÿ àòðûìàííÿ ñïiñó äàñòóïíûõ ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Âûáàð ëþñòðà äëÿ àòðûìàííÿ ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ñóâÿçü ç ëþðàì äëÿ àòðûìàííÿ ñïiñó äàñòóïíûõ ïàêåòà¢"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "ßêi âàø ÷àñàâû ïîÿñ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Âàø ñiñòýìíû ãàäçiííiê óñòàëÿâàíû íà GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS ñåðâåð:"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Öi ¸ñöü ó âàñ iíøû?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "Ïîðò ìûøû"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Ïðûíòýð"
-
-#: ../../install_steps_interactive.pm_.c:1049
-#, fuzzy
-msgid "ISDN card"
-msgstr "Óíóòðàíàÿ ISDN êàðòà"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-#, fuzzy
-msgid "Sound card"
-msgstr "Ñòàíäàðòíû"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Âûêàðûñòî¢âàöü NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ïàðîëü äëÿ root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Íÿìà ïàðîëþ"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ãýòû ïàðîëü çàíàäòà ïðîñòû (ÿãî äà¢æûíÿ ïàâiííà áûöü íå ìåíåé çà %d ëiòàðà¢)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "À¢òýíòûôiêàöûÿ"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "À¢òýíòûôiêàöûÿ"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "ñåðâåð"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "À¢òýíòûôiêàöûÿ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ñåðâåð:"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ç äàïàìîãàé çàãðóçà÷íàãà äûñêà âû çìîæàöå çàãðóæàöü Linux íåçàëåæíà àä\n"
-" ñòàíäàðòíàãà çàãðóç÷ûêà. Ãýòà ìîæà áûöü ÿêàñíà, êàëi âû íå æàäàåöå \n"
-"¢ñòà븢âàöü SILO, êàëi iíøàÿ àïåðàöûéíàÿ ñiñòýìà âûäàëÿå SILO, öi SILO íå \n"
-"ìîæà ïðàöàâàöü ó âàøàé êàíôiãóðàöûi. Çàãðóçà÷íû äûñê òàêñàìà ìîæà áûöü \n"
-"âûêàðûñòàí ñóìåñíà ç âûðàòàâàëüíàé äûñêåòàé Mandrake Linux, ÿêàÿ âåëüìi \n"
-"ïàëåã÷ûöü âûðàòàâàííå ñiñòýìû ïàñëÿ çáîþ.\n"
-"\n"
-"Êàëi æàäàåöå ñòâàðûöü çàãðóçà÷íû äûñê çàðàç, óñòà¢öå äûñêåòó ¢ ïåðøû\n"
-"äûñêàâîä i íàöiñíiöå \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ïåðøû äûñêàâîä"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Äðóãi äûñêàâîä"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ïðàïóñöiöü"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ç äàïàìîãàé çàãðóçà÷íàãà äûñêó âû çìîæàöå çàãðóæàöü Linux òàêñàìà ÿê i \n"
-"ñòàíäàðòíûì çàãðóç÷ûêàì. Ãýòà ìîæà áûöü ÿêàñíà, êàëi âû íå æàäàåöå \n"
-"¢ñòà븢âàöü LILO (öi Grub), êàëi iíøàÿ àïåðàöûéíàÿ ñiñòýìà âûäàëÿå LILO,\n"
-"öi LILO íå ìîæà ïðàöàâàöü ó âàøàé êàíôiãóðàöûi. Çàãðóçà÷íû äûñê òàêñàìà "
-"ìîæà\n"
-"áûöü âûêàðûñòàíû ñóìåñíà ç ðàìîíòíàé äûñêåòàé Mandrake Linux, ÿêàÿ âåëüìi \n"
-"ïàëåã÷ûöü âûðàòàâàííå ñiñòýìû ïàñëÿ çáîþ.\n"
-"\n"
-"Æàäàåöå ñòâàðûöü çàãðóçà÷íû äûñê çàðàç?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Âûáà÷àéöå, àëå äûñêàâîä íåäàñòóïíû"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Àáÿðûöå äûñêàâîä, ó ÿêiì áóäçå ñòâàðàööà çàãðóçà÷íàÿ äûñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Ñòâàðýííå çàãðóçà÷íàé äûñêåòû"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ïàäðûõòî¢êà çàãðóç÷ûêà"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Âû æàäàåöå âûêàðûñòî¢âàöü aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ïàìûëêà ¢ñòàëÿâàííÿ àboot, \n"
-"ñïðàáàâàöü óñòà븢âàöü, íåãëåäçÿ÷û íà ìàã÷ûìàñöü ïàðóøýííÿ ïåðøàãà ðàçäåëó?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Óñòàëÿâàííå çàãðóç÷ûêó"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Ïðàöýñ óñòàëÿâàííÿ çàãðóç÷ûêà íå àòðûìà¢ñÿ. Óçíiêëà íàñòóïíàÿ ïàìûëêà:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Óñòà¢öå äûñêåòó ¢ äûñêàâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Ñòâàðýííå äûñêåòû äëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Íåêàòîðûÿ êðîêi íå çàâåðøàíû.\n"
-"Âû ñàïðà¢äû æàäàåöå âûéñöi çàðàç?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Âiíøóåì, óñòàëÿâàííå çàâåðøàíà.\n"
-"Âûäàëiöå çàãðóçà÷íû äûñê i íàöiñíiöå enter äëÿ ïåðàçàãðóçêi.\n"
-"\n"
-"\n"
-"Çà iíôàðìàöûÿé ïðà çìÿíåííi äàäçåíàãà âûïóñêó Mandrake Linux,\n"
-"çâÿðòàéöåñü íà \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Iíôàðìàöûÿ ïà íàñòðîéêå âàøàé ñiñòýìû ¸ñòü ¢ ïàñëÿ-¢ñòàë¸âà÷íàé\n"
-"ãëàâå âàøàãà Äàïàìîæíiêà Êàðûñòàëüíiêó ç Àôiöûéíàãà Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Ñòâàðýííå äûñêåòû äëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "À¢òàìàòû÷íû"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "Ïåðàçàãðóçiöü"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Àñàáiñòû âûáàð ïàêåòà¢"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Óñòàëÿâàííå Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ïàìiæ ýëåìåíòàìi  |  <Space> âûáàð  | <F12> íàñòóïíû ýêðàí "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Àáÿðûöå äçåÿííå"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Êàëi ëàñêà, ïà÷àêàéöå"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Iíôàðìàöûÿ"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ðàçãàðíóöü äðýâà"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Çãàðíóöü äðýâà"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Ïåðàêëþ÷ýííå ïàìiæ óïàðàäêàâàííåì ïà ãðóïå i àñîáêàõ"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Äðýííû âûáàð, ïàñïðàáóéöå ÿø÷å\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Âàø âûáàð? (çìî¢÷àííå %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Âàø âûáàð? (çìî¢÷àííå %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Îïöûi: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Âû æàäàåöå âûêàðûñòî¢âàöü aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Âàø âûáàð? (çìî¢÷àííå %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "×åøñêi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Íÿìåöêi"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Iñïàíñêi"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Ôiíñêi"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ôðàíöóçñêi"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Íàðâåæñêi"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Ïîëüñêi"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ðóñêi"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Øâåöêi"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iðàíñêi"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Àðìÿíñêi (ñòàðû)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Àðìÿíñêi (typewriter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Àðìÿíñêi (ôàíåòû÷íû)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Àçåðáàéäæàíñê³ (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Áåëüãiéñêi"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Àðìÿíñêi (ôàíåòû÷íû)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Áàëãàðñêi"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Áðàçiëüñêi (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Áåëàðóñê³"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Øâåéöàðñêi (Íÿìåöêàÿ ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Øâåéöàðñêi (Ôðàíöóçñêàÿ ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "×åøñêi (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Íÿìåöêi (íÿìà çàáëàêiðàâàíûõ êëàâiø)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Äàöêi"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Íàðâåæñêi)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Ýñòîíñêi"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ãðóçiíñêi (\"Ðóñêàÿ\" ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ãðóçiíñêi (\"Ëàöiíñêàÿ\" ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Ãðý÷àñêi"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ìàäüÿðñêi"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Õàðâàöêi"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "I¢ðûò"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "I¢ðûò (ôàíåòû÷íû)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iðàíñêi"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Iñëàíäñêi"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Iòàëüÿíñêi"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ßïîíñêi 106 êëàâiø"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "UK êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Ëàöiíà-Àìåðûêàíñêi"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëiòî¢ñêi AZERTY (ñòàðû)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëiòî¢ñêi AZERTY (íîâû)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëiòî¢ñêi \"íóìàð ðàäêà\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëiòî¢ñêi \"ôàíåòû÷íû\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Ãàëàíäñêi"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Ïîëüñêi (ñòàíäàðòíàÿ ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Ïîëüñêi (qwertz ðàñêëàäêà)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Ïàðòóãàëüñêi"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Êàíàäñêi (Êâåáýê)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Ðóñêi (ß-Â-Å-Ð-Ò-È)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Ðóñêi (ß-Â-Å-Ð-Ò-È)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ðóñêi (ß-Â-Å-Ð-Ò-È)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Ñëàâåíñêi"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Ñëàâàöêi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Ñëàâàöêi (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Àçåðáàéäæàíñê³ (ê³ðûë³öà)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Òàáëiöà"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Òàéñêàÿ êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Òàéñêàÿ êëàâiÿòóðà"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Òóðýöêi (òðàäûöû¸íàÿ \"F\" ìàäýëü)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Òóðýöêi (ñó÷àñíàÿ \"Q\" ìàäýëü)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Óêðàiíñêi"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US êëàâiÿòóðà (ìiæíàðîäíàÿ)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Âüåòíàìñêi \"íóìàð ðàäêà\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Àçåðáàéäæàíñê³ (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ìàíöiðàâàííå äûñêó %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Ìûø"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Çâû÷àéíàÿ ìûø ç 2 êíîïêàì³"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-#, fuzzy
-msgid "1 button"
-msgstr "2 êíîïêi"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Çâû÷àéíàÿ ìûø ç 2 êíîïêàì³"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Àãóëüíû"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ç êîëàì"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "ïàñëÿäî¢íàÿ"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Çâû÷àéíàÿ ìûø ç 3 êíîïêàì³"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ïàñëÿäî¢íàÿ, ñòàðû òûï C7)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "Íÿìà ìûøû"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 êíîïêi"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 êíîïêi"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "íÿìà"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Íÿìà ìûøû"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "Ðóøöå êîëàì ìûøû!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "Ôiíñêi"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Äàëåé ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ãýòà äàêëàäíà?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "âûêàðûñòî¢âàöü pppoe"
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "use pptp"
-msgstr "âûêàðûñòî¢âàöü pppoe"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ßêi dhcp êëiåíò âû ïëàíóåöå âûêàðûñòî¢âàöü?\n"
-"Ïà çìî¢÷àííþ, ãýòà dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-#, fuzzy
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Íi âîäíû ethernet ñåòêàâû àäàïòàð ó âàøàé ñiñòýìå íå âûçíà÷àíû. Êàëi ëàñêà, "
-"ñêàðûñòàéöå êàíôiãóðàöûéíû iíñòðóìýíò."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Ïàçíà÷öå ñåòêàâû iíòýðôåéñ"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Êàëi ëàñêà, ïàçíà÷öå ñåòêàâû àäàïòàð, ÿêi ïëàíóåöå âûêàðûñòî¢âàöü äëÿ "
-"äàëó÷ýííÿ äà iíòýðíýò"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ñåòêàâàÿ êàðòà íå çíîéäçåíà"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Óâÿäçiöå iìÿ ñâà¸é ìàøûíû (host).\n"
-"Iìÿ âàøàé ìàøûíû ïàâiííà áûöü çàäàäçåíà ïî¢íàñöþ,\n"
-"íàïðûêëàä ``mybox.mylab.myco.com''.\n"
-"Âû ìîæàöå òàêñàìà ¢âåñöi IP àäðàñ øëþçó, êàëi ¸í ó âàñ ¸ñöü."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Iìÿ ìàøûíû"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Óíóòðàíàÿ ISDN êàðòà"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Óíóòðàíàÿ ISDN êàðòà"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Íàñòðîéêà ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Àáÿðûöå âàøàãà ïðàâàéäàðà.\n"
-"êàëi ÿãî íÿìà ¢ ãýòûì ñïiñå, àáÿðûöå òûï ``Iíøû''"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Å¢ðîïà (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Ïàäêëþ÷ýííå"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ïàäêëþ÷ýííå \n"
-" íå ïðàç D-êàíàë (âûëó÷àíûÿ êàíàëû)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "ßêi ïðàòàêîë âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "ßêi òûï êàðòû âû ìàåöå?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Íå âÿäîìà"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Êàëi âû ìàåöå ISA êàðòó, âåëi÷ûíi íà íàñòóïíûì ýêðàíå ïàâiííû áûöü "
-"ñàïðà¢äíûìi.\n"
-"\n"
-"Êàëi âû ìàåöå PCMCIA êàðòó, âû ïàâiííû âåäàöü irq i io âàøàé êàðòû.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Àäìÿíiöü"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Ïðàöÿãíóöü"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ßêàÿ ¢ âàñ ISDN êàðòà?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Âûçíà÷àíà ISDN PCI êàðòà, àëå íåâÿäîìû ÿå òûï. Êàëi ëàñêà, ïàçíà÷öå PCI "
-"êàðòó íà íàñòóïíûì ýêðàíå."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Êàðòà ISDN PCI íå çíîéäçåíà. Êàëi ëàñêà, ïàçíà÷öå íà íàñòóïíûì ýêðàíå."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Äà ÿêîãà ïàñëÿäî¢íàãà ïîðòó äàëó÷àíû ìàäýì?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Ïàðàìåòðû êàìóòàâàíàãà çëó÷ýííÿ (Dialup)"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Íóìàð òýëåôîíó"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Iìÿ (login ID)"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "íà àñíîâå ñêðûïòó"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "íà àñíîâå òýðìiíàëó"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Iìÿ äàìåíó"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Ïåðøû ñåðâåð DNS"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Äðóãi ñåðâåð DNS:"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Íàñòðîéêà ISDN"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Iíòýðíýò çëó÷ýííå i êàíôiãóðàöûÿ"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Àáÿðûöå àñíî¢íàãà êàðûñòàëüíiêà:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Âûçíà÷ýííå ïðûëàäà¢..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Äóáëÿâàííå ïóíêòó ìàíöiðàâàííÿ %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Íàñòðîéêà ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Çëó÷ýííå ïðûíòýðó"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Çëó÷ýííå ïðûíòýðó"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Àáÿðûöå iíñòðóìåíò, ÿêi æàäàåöå ñêàðûñòàöü"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Âû æàäàåöå, êàá ãýòàå çëó÷ýííå ñòàðòàâàëà ïðû çàãðóçöû?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Êàëi ëàñêà, óâÿäçiöå IP êàíôiãóðàöûþ äëÿ âàøàé ìàøûíû.\n"
-"Êîæíû ïóíêò ïàâiíåí áûöü çàïî¢íåíû ÿê IP àäðàñ ¢ äçåñÿòêîâà-êðîïêàâàé \n"
-"íàòàöûi (íàïðûêëàä, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Íàñòðîéêà ñåòêàâàé ïðûëàäû %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Ñåðâåð XFree86: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP àäðàñ"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Ìàñêà ñåòêi"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "À¢òàìàòû÷íû IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP àäðàñ ïàâiíåí áûöü ó ôàðìàöå 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Óâÿäçiöå iìÿ ñâà¸é ìàøûíû (host).\n"
-"Iìÿ âàøàé ìàøûíû ïàâiííà áûöü çàäàäçåíà ïî¢íàñöþ,\n"
-"íàïðûêëàä ``mybox.mylab.myco.com''.\n"
-"Âû ìîæàöå òàêñàìà ¢âåñöi IP àäðàñ øëþçó, êàëi ¸í ó âàñ ¸ñöü."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ñåðâåð"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Ïðûëàäà-øëþç"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Íàñòðîéêà proxy êýøóþ÷ûõ ñåðâåðà¢"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy ïàâiíåí áûöü http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ïàâiíåí áûöü ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Öi æàäàåöå çàðàç ïàñïðàáàâàöü äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"\n"
-"Âû ìîæàöå àäêëþ÷ûööà ö³ ïåðàêàíô³ãóðàâàöü âàøàå çëó÷ýííå."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Íàñòðîéêà äàëó÷ýííÿ äà Iíòýðíýòó"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Êàëi ëàñêà, çàïî¢íiöå öi ïàçíà÷öå ïîëå íiæýé"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ êàðòû"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Àäðàñû ïàìÿö³ êàðòû (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO êàðòû"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 êàðòû"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 êàðòû"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Âàø àñàáiñòû òýëåôîííû íóìàð"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Iìÿ ïðàâàéäàðó, íàïðûêëàä ïðàâàéäàð.net"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Íóìàð òýëåôîíó ïðàâàéäàðà"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 ïðàâàéäàðó"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 ïðàâàéäàðó"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Âûáàð êëàâiÿòóðû"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Ðýæûì çëó÷ýííÿ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Iìÿ äëÿ ¢âàõîäó (iìÿ êàðûñòàëüíiêó)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Ïàðîëü äëÿ ¢âàõîäó"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ïàìûëêà ìàíöiðàâàííÿ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ïàøûðàíû ðàçäçåë íå ïàäòðûìëiâàåööà ãýòàé ïëàòôîðìàé"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Âû ìàåöå äçiðêó ¢ òàáëiöû ðàäçåëà¢, àëå ÿ íå ìàþ ìàã÷ûìàñöi ÿå ñêàðûñòàöü.\n"
-"Àäçiíû âûõàä ó òûì, êàá ïåðàìÿñöiöü ïåðøàñíûÿ ðàçäçåëû òàê, êàá äçiðêà iøëà\n"
-"àäðàçó çà ïàøûðàíûì (extended) ðàçäçåëàì"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Àäíà¢ëåííå ç ôàéëà %s íå àòðûìàëàñÿ: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Ïàìûëêà çàïiñó ¢ ôàéë %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ïàâiííû ìåöü"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "âàæíà"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "âåëüìi äîáðà"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "äîáðà"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ìîæà áûöü"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Àääàëåíû ñåðâåð lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Ñåòêàâû ïðûíòýð (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Ñåðâåð äðóêó"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI ïðûíòýðó"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Ïàìûëêà çàïiñó ¢ ôàéë %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(ìîäóëü %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ñåðâåðà SMB"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Ïà äàìà¢ëåííþ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Âûáàð òûïó çëó÷ýííÿ ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ßê ïðûíòàð äàëó÷àíû?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Àääàëåíû CUPS ñåðâåð íå ïàòðàáóå àä Âàñ íàñòðîéê³ ïðûíòýðó\n"
-"íà ãýòàé ìàøûíå, ¸í áóäçå çíîéäçåíû à¢òàìàòû÷íà.\n"
-"Êàë³ Âû íå ¢ïý¢íåíû, àáÿðûöå \"Àääàëåíû ñåðâåð CUPS\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP àäðàñ ïàâiíåí áûöü ó ôàðìàöå 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP ñåðâåðà SMB"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ïîðò"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Íàñòðîéêà ìàäýìó"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Âûçíà÷ýííå ïðûëàäà¢..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Ïðàâåðêà ïàðòî¢"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Äóáëÿâàííå ïóíêòó ìàíöiðàâàííÿ %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "URI ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Äà ÿêîãà ïàñëÿäî¢íàãà ïîðòó äàëó÷àíû ìàäýì?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "URI ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Óñòàëÿâàííå ïàêåòó %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Óñòàëÿâàííå ïàêåòó %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Îïöûi àääàëåíàãà ïðûíòýðó lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Äëÿ íàñòðîéêi àääàëåíàé ÷àðãi äðóêó âàì ïàòðýáíà\n"
-"ïàçíà÷ûöü iìÿ àääàëåíàãà ñåðâåðà i iìÿ ÷àðãi äðóêó,\n"
-"ó ÿêóþ àääàëåíû ñåðâåð áóäçå àäïðà¢ëÿöü çàäàííi."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Àääàëåíû âóçåë"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Àääàëåíû âóçåë"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Àääàëåíû âóçåë"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Îïöûi ïðûíòýðó SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Äëÿ äðóêó íà ïðûíòýðû SMB íåàáõîäíà ïàçíà÷ûöü iìÿ õîñòó SMB (íå çà¢ñ¸äû "
-"ñóïàäàå ç iìåíåì ó ñåòöû TCP/IP) i àäðàñ IP ñåðâåðà äðóêó, à òàêñàìà iìÿ "
-"ðýñóðñó, ÿêi ñïàëó÷àíû ç âûáðàíûì ïðûíòýðàì, iìÿ êàðûñòàëüíiêó, ïàðîëü i "
-"iíôàðìàöûþ àá ïðàöî¢íàé ãðóïå."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Iìÿ ñåðâåðó SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP ñåðâåðà SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Iìÿ äëÿ ðàçìåðêàâàíàãà ðýñóðñó"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Ïðàöî¢íàÿ ãðóïà"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Îïöûi ïðûíòýðó NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Äëÿ äðóêó íà ïðûíòýðû NetWare íåàáõîäíà ïàçíà÷ûöü iìÿ ñåðâåðó äðóêó NetWare "
-"(íå çà¢ñ¸äû ñóïàäàå ç iìåíåì ó ñåòöû TCP/IP) i iìÿ ÷àðãi äðóêó, ÿêàÿ "
-"àäïàâÿäàå àáðàíàìó ïðûíòýðó, à òàêñàìà iìÿ êàðûñòàëüíiêó i ïàðîëü."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Ñåðâåð äðóêó"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Iìÿ ÷àðãi äðóêó"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Îïöûi ñîêåòó ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Êàá äðóêàâàöü ïðàç ñîêåò äðóêàðêi, âàì íåàáõîäíà çàáÿñïå÷ûöü\n"
-"iìÿ ïðûíòýðó i ìàã÷ûìà ÿãî íóìàð ïîðòó."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Iìÿ ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Iìÿ ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Àïiñàííå"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Ãýòà äàêëàäíà?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Çëó÷ýííå ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "ßêi òûï äðóêàðêi âû ìàåöå?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Æàäàåöå ïðàòýñöiðàâàöü äðóê?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Ïðàâåðêà ïàðòî¢"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Òàê,  íàäðóêàâàöü àáåäçâå ñòàðîíêi òýêñòó"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ñòàíäàðòíû"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Òýñòàâûÿ ñòàðîíêi àäïðà¢ëåíû äýìàíó äðóêó.\n"
-"Ïåðàä òûì, ÿê ïðûíòýð çàïðàöóå, ìîæà ïðàéñöi ïý¢íû ÷àñ.\n"
-"Ñòàòóñ äðóêó:\n"
-"%s\n"
-"\n"
-"¨í ïðàöóå íàðìàëüíà?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Òýñòàâûÿ ñòàðîíêi àäïðà¢ëåíû äýìàíó äðóêó.\n"
-"Ïåðàä òûì, ÿê ïðûíòýð çàïðàöóå, ìîæà ïðàéñöi ïý¢íû ÷àñ.\n"
-"¨í ïðàöóå íàðìàëüíà?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Ïîðò ìûøû"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Àäëó÷ýííå àä ñåòêi"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Àäëó÷ýííå àä ñåòêi"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Îïöûi ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Iìÿ äðóêàðêi"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Íàñòðîéêà ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ìàíiòîð ïàêóëü íå íàñòðîåíû"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "ßêóþ ñiñòýìó äðóêó Âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Âûñîêi"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Ïàðàíàiäàëüíû"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "ßêóþ ñiñòýìó äðóêó Âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Âûáàð òûïó çëó÷ýííÿ ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ßêóþ ñiñòýìó äðóêó Âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Íàñòðîéêà ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Óñòàëÿâàííå ïàêåòó %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Îïöûi ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Íàñòðîéêà ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Æàäàåöå íàñòðîiöü ïðûíòýð?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Òóò çìÿø÷àþööà ÷ýðãi äðóêó.\n"
-"Âû ìîæàöå äàäàöü ÿø÷ý, àëüáî çìÿíiöü iñíóþ÷ûÿ."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Òóò çìÿø÷àþööà ÷ýðãi äðóêó.\n"
-"Âû ìîæàöå äàäàöü ÿø÷ý, àëüáî çìÿíiöü iñíóþ÷ûÿ."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Çâû÷àéíû"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Çëó÷ýííå ïðûíòýðó"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Äðóê òýñòàâûõ ñòàðîíàê"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Ëàêàëüíû ïðûíòýð"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "×ûòàþ áàçó äàäçåíûõ äðàéâåðî¢ CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Íàñòðîéêà proxy êýøóþ÷ûõ ñåðâåðà¢"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Ïîðò"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy ïàâiíåí áûöü http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy ïàâiíåí áûöü ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "À¢òàìàòû÷íû ¢âàõîä ó ñiñòýìó"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Ïàðîëü"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Íÿìà ïàðîëþ"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Ïàðîëi íå ñóïàäàþöü"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Íå àòðûìëiâàåööà äàäàöü ðàçäçåë íà _àäôàðìàöiðàâàíû_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Íå àòðûìëiâàåööà çàïiñ ó ôàéë %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid íå ïðàöàçäîëüíû"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid íå ïðàöàçäîëüíû (ìîæà raid ïðûëàäû àäñóòíi÷àþöü?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Íåäàñòàòêîâà ðàçäçåëࢠäëÿ RAID óçðî¢íÿ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ïåðûÿäû÷íû êàìàíäíû ïëàíàâàëüíiê."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"ampd âûêàðûñòî¢âàåööà äëÿ àäñëåæâàííÿ ñòàòóñó áàòàðýi i âÿäçåííÿ "
-"ñòàòûñòûêi.\n"
-"ßãî ìîæíà âûêàðûñòî¢âàöü äëÿ âûêëþ÷ýííÿ ìàøûíû ïðû íiçêiì çàðàäçå áàòàðýi."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Êàìàíäû, ÿêiÿ âûêîíâàþööà, ôiêñóþööà ïà êàìàíäçå i ÷àñå ÿå âûêàíàííÿ\n"
-"i âûêîíâàþööà ãðóïû êàìàíä, êàëi çàãðóçêà ïàìÿöi íiæýé äàñòàòêîâàé."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron - ñòàíäàðòíàÿ UNIX ïðàãðàìà, ÿêàÿ âûêîíâàå ïðàãðàìû êàðûñòàëüíiêà\n"
-"ïðàç ïàçíà÷àíûÿ ïåðûÿäû ÷àñó. Vixie cron äàäàå ðàä äàïà¢íåííÿ¢ äà "
-"ñòàíäàðòíàãà\n"
-"UNIX cron, óêëþ÷àþ÷û ëåïøû ¢çðîâåíü áÿñïåêi i ìîöíûÿ êàíôiãóðàöûéíûÿ îïöûi."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM äàäàå ïàäòðûìêó ìûøû äà ïðàãðàìà¢, ÿêiÿ ïðàöóþöü ó òýêñòàâûì ðýæûìå,\n"
-"òàêiõ ÿê Midnight Commander. Ãýòà äàçâàëÿå âûêàðûñòî¢âàöü ìûø ïðû "
-"êàïiðàâàííi i ¢ñòà¢öû,\n"
-"i ¢êëþ÷àå ïàäòðûìêó ¢ñïëûâàþ÷ûõ (pop-up) ìåíþ ¢ òýêñòàâûì ðýæûìå."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - ãýòà World Wide Web ñåðâåð. ¨í âûêàðûñòî¢çâàåöà äëÿ àáñëóãî¢âàííÿ\n"
-"HTML ôàéëࢠi CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Iíòýðíýò ñóïåðñåðâåð-äýìàí (çàâåööà inetd) çàïóñêàå ïðû ñòàðöå \n"
-"êîëüêàñöü ðîçíûõ iíòýðíýò ñëóæáà¢, ÿêiÿ íåàáõîäíû. ßãî ìîæíà âûêàðûñòî¢âàöü "
-"äëÿ ïóñêó\n"
-"øìàòë³ê³õ ñëóæáà¢, óêëþ÷àþ÷û telnet, ftp, rsh i rlogin. Áëàêóþ÷û inetd, "
-"áëàêóåì\n"
-"óñå ñëóæáû, çà ÿêiÿ ¸í àäêàçâàå."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ãýòû ïàêåò çàãðóæàå àáðàíóþ ðàñêëàäêó êëàâiÿòóðû ÿê íàáîð ç\n"
-"/etc/sysconfig/keyboard. ¨íà ìîæà áûöü àáðàíà òàêñàìà ç äàïàìîãàé "
-"kbdconfig.\n"
-"Âû ìîæàöå çðàáiöü äàñòóïíàé ÿå äëÿ øìàòë³ê³õ ìàøûíà¢."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd - ãýòû äýìàí äðóêó, ïàòðýáíû äëÿ êàðýêòíàé ïðàöû lpr. Ãýòà\n"
-"ñåðâåð, ÿêi êiðóå ïðàöàé ïðûíòýðó(à¢)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) - ãýòà ñåðâåð äàìåííûõ iì¸íà¢, ÿêi âûêàðûñòî¢âàåööà äëÿ\n"
-"ïåðàêëàäàííÿ iì¸í âóçëî¢ ó IP àäðàñû."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ìàíöiðàâàöü i ðàçìàíöiðàâàöü óñå ñåòêàâûÿ ôàéëàâûÿ ñiñòýìû (NFS),\n"
-" SMB (Lan Manager/Windows) i NCP (Netware) ïóíêòû ìàíöiðàâàííÿ."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Àêòûâiçàâàöü/äýàêòûâiçàâàöü óñå ñåòêàâûÿ iíòýðôåéñû, ñêàíôiãóðàâàíûÿ äëÿ\n"
-"ñòàðòó ïðû çàãðóçöû ñiñòýìû."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ãýòà âÿäîìû ïðàòàêîë äëÿ äîñòóïó äà ôàéëࢠïðàç TCP/IP ñåòêi.\n"
-"Ãýòàÿ ñëóæáà çàáÿñïå÷âàåööà NFS ñåðâåðàì, ÿêi êàíôiãóðûðóåöà ïðàç\n"
-"/etc/exports ôàéë."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS -  ãýòà âÿäîìû ïðàòàêîë äëÿ äîñòóïó äà ôàéëࢠïðàç TCP/IP\n"
-"ñåòêi. Ãýòàÿ ñëóæáà ¢ïëûâàå íà íàÿ¢íàñöü ñóâÿçi ïàìiæ NFS ôàéëàìi."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Ïàäòðûìêà PCMCIA - ãýòà çâû÷àéíà ïàäòðûìêà òàêiõ ðý÷à¢, ÿê Ethernet i\n"
-"ìàäýìû ¢ íà¢òáóêàõ. Âàì íÿìà íåàáõîäíàñöi êàíôiãóðàâàöü iõ, êàëi íà âàøàé\n"
-"ìàøûíå iõ íÿìà, öi ÿíà íå íà¢òáóê."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper (àãëÿäàëüíiê ïàðòî¢) êiðóå RPC çëó÷ýííÿìi, ÿêiÿ çâû÷àéíà\n"
-"âûêàðûñòî¢âàþööà òàêiìi ïðàòàêîëàìi ÿê NFS i NIS. Portmap ñåðâåð ïàâiíåí "
-"âûêîíâàööà\n"
-"íà ìàøûíàõ ÿêiÿ ïðàöóþöü ÿê ñåðâåðû äëÿ ïðàòàêîëà¢, ÿêiÿ ñêàðûñòî¢âàþöü RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix -  ãýòà ïàøòîâû òðàíñïàðòíû àãåíò, ïðàãðàìà, ÿêàÿ\n"
-"ïåðàìÿø÷àå ïîøòó ç àäíîé ìàøûíû íà éíøóþ."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Çàõàâàöü i àäíàâiöü ñiñòýìíû ýíòðàïiéíû ïóë äëÿ âûñîêàé ÿêàñöi\n"
-"ãåíåðàöû³ âûïàäêîâûõ ë³êà¢."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Äýìàí ìàðøðóòûçàöûi äàçâàëÿå äûíàìi÷íûì òàáëiöàì IP ìàðøðóòûçàöûi\n"
-"àäíà¢ëÿööà ïðàç RIP ïðàòàêîë. RIP âûêàðûñòî¢âàåööà ¢ ìàëûõ ñåòêàõ, áîëüø\n"
-"ñêëàäàíûÿ ïðàòàêîëû ìàðøðóòûçàöûi - ó âÿëiêiõ ñåòêàõ."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ïðàòàêîë rstat äàçâàëÿå êàðûñòàëüíiêàì ñåòêi àòðûìëiâàöü\n"
-"ïàìåðû íàãðóçêi äëÿ êîæíàé ìàøûíû ñåòêi."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ïðàòàêîë rusers äàçâàëÿå êàðûñòàëüíiêàì ñåòêi âûçíà÷àöü, õòî\n"
-"¢âàéøî¢ i ïðàöóå íà ìàøûíàõ ¢ ñåòöû."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ïðàòàêîë rwho äàå ìàã÷ûìàñöü êàðûñòàëüíiêàì àòðûìàöü ñïiñ ¢ñiõ\n"
-"êàðûñòàëüíiêà¢, óâàéøî¢øûõ íà ìàøûíó, âûêàíࢠrwho äýìàí (ïàäîáíû íà finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog - ãýòà ñðîäàê, ç äàïàìîãàé ÿêîãà ìíîãiÿ äýìàíû çàïiñâàþöü "
-"ïàâåäàìëåííi\n"
-"¢ ðîçíûÿ ôàéëû ñòàòûñòûêi. Ãýòà âåëüìi äîáðà äëÿ àãëÿäó ïðàöû ðîçíûõ ñëóæáà¢."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Çàïóñêàå i ïðûïûíÿå X Font Server ïðû çàãðóçöû i âûêëþ÷ýííi."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Àáÿðûöå, ÿêiÿ ñåðâiñû çàïóñêàöü à¢òàìàòû÷íà ïðû çàãðóçöû"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Ïðûíòýð"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "öiêàâà"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Îïöûi àääàëåíàãà ïðûíòýðó lpd"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Ñåðâåð äðóêó"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ïðûëàäà"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Óâàãà!"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Äàëó÷ûöü"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Ñòàðòàâàå ìåíþ"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Ñåêòàð"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Ïàäêëþ÷ýííå"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Ìóëüòûìåäûÿ - Ãðàô³êà"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "ðàñïðàöî¢ø÷ûê"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Iìÿ ñåðâåðó SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Çàáàâû"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "ýêñïåðò"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "àáàâÿçêîâà"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Óñòàëÿâàííå ïàêåòó %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Òàáëiöà ðàçäçåëࢠíå ÷ûòàåööà, ÿíà çàíàäòà ñàïñàâàíà äëÿ ìåíÿ :(\n"
-"Ïàñïðàáóþ iñöi äàëåé i áóäó ïðàïóñêàöü äðýííûÿ ðàçäçåëû"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Ïàìûëêà"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Íàñòðîéêà ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Íàñòðîéêà ìàäýìó"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Ïðûì³öå âiíøàâàííi!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Óñòà븢êà"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Äàäàöü êàðûñòàëüíiêà"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Ôàðìàòàâàííå âiðòóàëüíàãà ðàçäçåëó %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Âûáàð ãðóïû ïàêåòà¢"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Âûäàëiöü ÷àðãó äðóêó"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Âûäàëiöü Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Iìÿ êàðûñòàëüíiêó:"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Ïàñïðàáóéöå ÿø÷ý ðàç"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Ïàñïðàáóéöå ÿø÷ý ðàç"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Íÿìà ïàðîëþ"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Âûáàð òûïó çëó÷ýííÿ ïðûíòýðó"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Êàëi ëàñêà, àáÿðûöå òûï êëàâiÿòóðû."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Íàö³ñí³öå íà ðàçäçåë"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Ñåòêà:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Iìÿ êàðûñòàëüíiêó:"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Êàëi ëàñêà, àáÿðûöå ìîâó äëÿ êàðûñòàííÿ."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Âûêàðûñòî¢âàöü àïòûìiçàöûþ æîðñòêàãà äûñêó?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Âûêàðûñòî¢âàöü àïòûìiçàöûþ æîðñòêàãà äûñêó?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "×àêàéöå"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ç êîëàì"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ç êîëàì"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Îïöûi ìîäóëþ:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "Ñåòêà:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Íàñòð. ôàéëàâûõ ñiñòýìà¢"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Îïöûi"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Äà ÿêîãà ïàñëÿäî¢íàãà ïîðòó äàëó÷àíû ìàäýì?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "êàëi ëàñêà, ïàçíà÷öå òûï âàøàé ìûøû."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Àäíà¢ëåííå ç äûñêåòû"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "êàëi ëàñêà, ïàçíà÷öå òûï âàøàé ìûøû."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "²íøûÿ"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Óñòàëÿâàííå ñiñòýìû"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Àäíà¢ëåííå ç ôàéëó"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Àäíà¢ëåííå ç ôàéëó"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Ïà âûáàðó"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Ñòàðòàâàå ìåíþ"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Àäíà¢ëåííå ç ôàéëó"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Òýêñò"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Âûáàð ïàêåòà¢"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Êàëi ëàñêà, àáÿðûöå ìîâó äëÿ êàðûñòàííÿ."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Êàëi ëàñêà, àáÿðûöå ìîâó äëÿ êàðûñòàííÿ."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Êàëi ëàñêà, àáÿðûöå ìîâó äëÿ êàðûñòàííÿ."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Çàõàâàííå ¢ ôàéë"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Çàêàí÷ýííå íàñòðîéêi"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Íàñòð. ôàéëàâûõ ñiñòýìà¢"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Óñòàëÿâàííå %s íå àòðûìàëàñÿ. Óçíiêëà íàñòóïíàÿ ïàìûëêà:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "Íå çíàéøëi %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Çðîáëåíà"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Ôàðìàòàâàöü äûñêåòó"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ïàäðûõòî¢êà ¢ñòàëÿâàíüíÿ"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "àáìåæàâàííå"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "àáìåæàâàííå"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Ôàðìàòàâàííå ðàçäçåëà¢"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Âûäàëåííå âûáðàíûõ RPM-ïàêåòࢠç ñiñòýìû"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Çàêàí÷ýííå íàñòðîéêi"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Êðîïêà ìàíöiðàâàííÿ"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Âûáàð ðàçäçåëࢠäëÿ ôàðìàòàâàííÿ"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "äîáðà"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Àäìÿíiöü"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Ïðûíòýð"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Óñòàëÿâàííå ñiñòýìû"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Àáÿðûöå ôàéë"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Àääàëåíû ïðûíòýð"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Ó âàøàé ñ³ñòýìå íÿìà íiâîäíàãà ñåòêàâàãà àäàïòàðà!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Óñòà븢êà"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Ó âàøàé ñ³ñòýìå íÿìà íiâîäíàãà ñåòêàâàãà àäàïòàðà!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Çàêàí÷ýííå ¢ñòàëÿâàííÿ"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç ìàã÷ûìà"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "Òàáëiöà"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "Íàñòðîéêà X Window"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Âûçíà÷ýííå ïðûëàäà¢..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç çàáàðîíåíà"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç çàáàðîíåíà"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "Òàáëiöà"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç ìàã÷ûìà"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Âàø êàìï'þòàð ìîæà áûöü ñêàíô³ãóðàâàíû íà ñóìåñíàå âûêàðûñòàííå\n"
-" ²íòýðíýòó (Internet Connection Sharing)?\n"
-"\n"
-"Çà¢âàãà: âàì ïàòðýáíû ñåòêàâû àäàïòàð äëÿ ïàäêëþ÷ýííÿ äà ËÂÑ.\n"
-"\n"
-"Âû æàäàåöå óñòàëÿâàöü ñóìåñíû äîñòóï äà Internet?"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ó âàøàé ñ³ñòýìå íÿìà íiâîäíàãà ñåòêàâàãà àäàïòàðà!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Íi âîäíû ethernet ñåòêàâû àäàïòàð ó âàøàé ñiñòýìå íå âûçíà÷àíû. Êàëi ëàñêà, "
-"ñêàðûñòàéöå êàíôiãóðàöûéíû iíñòðóìýíò."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Êàëi ëàñêà, àáÿðûöå ñåòêàâû àäàïòàð, ÿê³ áóäçå âûêàðûñòàíû äëÿ äàëó÷ýííÿ äà "
-"âàøàé ëàêàëüíàé ñåòêi."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ìàíiòîð ïàêóëü íå íàñòðîåíû"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Íàñòðîéêà ìàäýìó"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ñåðâåðà SMB"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ïàòýíöûéíû àäðàñ ËÂÑ êàíôëiêòóå ç áÿãó÷àé êàíôiãóðàöûÿé %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Óâàãà! Çíîéäçåíà ³ñíóþ÷àÿ ñiñòýìà ñåòêàâàé áÿñïåêi (firewall). Âàì ìàã÷ûìà "
-"ñïàòðýá³ööà ñêàðýêòàâàöü ÿå ïàñëÿ ¢ñòàëÿâàííÿ."
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Íàñòðîéêà IDE"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Êàíô³ãóðàöûÿ ñöýíàðà¢, óñòàëÿâàííå ÏÇ, çàïóñê ñëóæáà¢..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Ïðàáëåìû ç óñòàëÿâàííåì ïàêåòó %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Óñå àäêàíô³ãóðàâàíà.\n"
-"Çàðàç âû ìîæàöå ñóìåñíà âûêàðûñòî¢âàöü ïàäêëþ÷ýííå äà Internet\n"
-"ç ³íøûì³ êàìï'þòýðàì³ ¢  âàøàé ËÂÑ, êàðûñòàþ÷ûñÿ à¢òàìàòû÷íûì\n"
-"êàíô³ãóðàâàííåì (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå çàðàç ìàã÷ûìà"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Iíòýðíýò çëó÷ýííå i êàíôiãóðàöûÿ"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Ñóìåñíàå Iíòýðíýò-çëó÷ýííå"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "ïàìûëêà ìàíöiðàâàííÿ: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Iìÿ ìàøûíû"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Òûï: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Øëþç:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Íàñòðîéêà ñëóæáà¢"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Íàñòðîéêà ADSL"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "ñåðâåð"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Ñåòêàâû iíòýðôåéñ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Ñòàðòàâàå ìåíþ"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Íàñòðîéêà ëàêàëüíàé ñåòêi"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Ìàéñòàð ñòâàðýííÿ..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Ïðàâåðêà ïàðàìåòðࢠíàñòðîéêi"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Ðàçìåðêàâàííå"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Àêòû¢íû"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Àêòû¢íû"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Iíòýðíýò çëó÷ýííå i êàíôiãóðàöûÿ"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Iíòýðíýò çëó÷ýííå i êàíôiãóðàöûÿ"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Iìÿ çëó÷ýííÿ"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Øëþç"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Íàñòðîéêi ¢çðî¢íÿ áÿñïåêi"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Àáÿðûöå iíñòðóìåíò, ÿêi æàäàåöå ñêàðûñòàöü"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Êàíàäñêi (Êâåáýê)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Å¢ðîïà"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Iñëàíäñêi"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Å¢ðîïà"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "ïàñëÿäî¢íàÿ"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Êàëi ëàñêà, àáÿðûöå òûï êëàâiÿòóðû."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Âû æàäàåöå êàá BackSpace ïðàöàâࢠó êàíñîë³ ÿê Delete?"
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Çìÿíiöü ïàìåðû ýêðàíó"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Çìÿíiöå âàø Cd-Rom!\n"
-"\n"
-"Êàëi ëàñêà, óñòà¢öå Cd-Rom, ïàçíà÷àíû \"%s\", ó âàø äûñêàâîä i íàöiñíiöå Oê "
-"ïàñëÿ.\n"
-"Êàëi âû íå ìàåöå ÿãî, íàöiñíiöå Àäìÿíiöü, êàá àäìÿíiöü óñòàëÿâàííå ç ãýòàãà "
-"Cd."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Íåìàã÷ûìà çàïóñö³öü live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Iìÿ êàðûñòàëüíiêó:"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Ïðàâåðêà ïàðòî¢"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Íàñòðîéêà ADSL"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "öåíü"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ïðûëàäà"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "ôàðìàòàâàííå"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "êàëi ëàñêà, ïàçíà÷öå òûï âàøàé ìûøû."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb íå çíîéäçåí\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Ýìóëÿâàöü òðýöþþ êíîïêó?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Àáÿðûöå âiäýàêàðòó"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Çàãðóçà÷íàÿ ïðûëàäà"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Çíîéäçåíà ñ³ñòýìà ñåòêàâàé áÿñïåê³ (firewall)!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Âûáàð ìîâû"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Êëàñ óñòàëÿâàííÿ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Âûçíà÷ýííå æîðñòêàãà äûñêó"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Íàñòðîéêà ìûøû"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Âûáàð êëàâiÿòóðû"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "êó÷àðàâû"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Íàñòð. ôàéëàâûõ ñiñòýìà¢"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ôàðìàòàâàííå ðàçäçåëà¢"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Âûáàð ïàêåòà¢"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Óñòàëÿâàííå ñiñòýìû"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Äàäàöü êàðûñòàëüíiêà"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Íàñòðîéêà ñåòêi"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Íàñòðîéêà ñëóæáà¢"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Óñòàëÿâàííå çàãðóç÷ûêó"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Ñòâàðûöü çàãð. äûñê"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Íàñòðîéêà X Window"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Óñòàëÿâàííå ñiñòýìû"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Çàêàí÷ýííå ¢ñòàëÿâàííÿ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ïàìûëêà àäêðûööÿ %s äëÿ çàïiñó: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Ïàäðûõòî¢êà ¢ñòàëÿâàíüíÿ"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Ñåòêàâû ïðûíòýð (socket)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "äîáðà"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "²íñòðóìåíòàëüíûÿ ñðîäê³ äëÿ Palm Pilot ³ Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Îô³ñíûÿ ïðàãðàìû: ïðàöýñàðû ñëîâࢠ(kword, abiword), ýëåêòðîíûÿ òàáë³öû, "
-"àãëÿäàëüí³ê³ pdf-ôàéëà¢, ³ ã.ä."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "À¢äû¸ñðîäê³: ïðàéãðàâàëüí³ê³ mp3 ³ midi, ì³êøàðû ³ ã.ä."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "í³ã³ ³ Howto ïà Linux ³ Free Software"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Ìóëüòûìåäûÿ - â³äýà"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Íàáîð ³íñòðóìåíòࢠäëÿ ïîøòû, íàâ³íà¢, web'ó, ïåðàäà÷û ôàéëà¢, ³ chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Ìóëüòûìåäûÿ - ãóê"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Óö³ë³òû"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "À¢òýíòûôiêàöûÿ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Êàíñîëüíûÿ ³íñòðóìåíòàëüíûÿ ñðîäê³"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Ìóëüòûìåäûÿ - ãóê"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Øìàò ãðàô³÷íûõ ìýíàäæýðࢠÏðàöî¢íûõ ñòàëî¢(Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment - àñíî¢íàå ãðàô³÷íàå àñÿðîäçå ç êàëåêöûÿé "
-"³íñòðóìåíòàëüíûõ ñðîäêà¢"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "²íñòðóìåíòàëüíûÿ ñðîäê³ ñòâàðýíüíÿ CD"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "ñåðâåð"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Ãðàô³÷íûÿ ïðàãðàìû òûïó The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Á³áë³ÿòýê³ ³ ïðàãðàìû äëÿ ðàñïðàöî¢ê³ íà Ñ ³ Ñ++"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Ñåòêàâû ïðûíòýð (socket)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Ìóëüòûìåäûÿ - ãóê"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Ðýäàêòàðû ³ ïðàéãðàâàëüí³ê³ â³äýà"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Ìóëüòûìåäûÿ - Ãðàô³êà"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Çàáà¢ëÿëüíûÿ ïðàãðàìû: àðêàäû, ñòðàòýã³³ ³ ã.ä."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Ïðûêëàäàíí³ äëÿ ÷ûòàííÿ ³ àäïðà¢ê³ ïîøòû ³ íàâ³íࢠ(pine, mutt,  tin...), "
-"Web àãëÿäàëüí³ê³"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Àðõ³âàòàðû, ýìóëÿòàðû, ìàí³òîðûíã"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Ïåðñàíàëüíûÿ ô³íàíñû"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Ãðàô³÷íàå àñÿðîäçå ñà çðó÷íûì äçåëÿ âûêàðûñòàííÿ íàáîðàì ïðûêëàäàííÿ¢ ³  "
-"³íñòðóìåíòàëüíûõ ñðîäêà¢"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Íàñòðîéêà çëó÷ýííÿ ç Iíòýðíýòàì"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Ðýäàêòàðû ³ ïðàéãðàâàëüí³ê³ ãóêó ³ â³äýà"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "²íøûÿ ãðàô³÷íûÿ Ïðàöî¢íûÿ ñòàëû"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Ðýäàêòàðû, àáàëîíê³, òýðì³íàëû"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Ïðàãðàìû ê³ðàâàííÿ âàøûì³ ô³íàíñàì³, òûïó gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Ìýíàäæàð àñàá³ñòàé ³íôàðìàöû³"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Ìóëüòûìåäûÿ - Ñòâàðýííå CD"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Àäìÿíiöü"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Íÿìà"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Àáÿðûöå àñíî¢íàãà êàðûñòàëüíiêà:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Àääàëåíû ïðûíòýð"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Âû íå ìîæàöå çàäàöü îïöûi ìîäóëþ %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ïàìûëêà ìàíöiðàâàííÿ"
-
-#~ msgid "Low"
-#~ msgstr "Ñëàáû"
-
-#~ msgid "Medium"
-#~ msgstr "Ñÿðýäíi"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Ãýòû óçðîâåíü áÿñïåêi ìàå øýðàã ïàëÿïøýííÿ¢, ó ïåðøóþ ÷àðãó\n"
-#~ "ïàâÿëi÷ûëàñÿ êîëüêàñöü ïðàâåðàê i ïàïÿðýäæàííÿ¢."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Ìóëüòûìåäûÿ"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ýêñïåðò"
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Íà ÿêi äûñê ïåðàíåñö³?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Âûáàð ïàêåòࢠäëÿ ¢ñòàëÿâàííÿ"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Iíôàðìàöûÿ"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache - ãýòà World Wide Web ñåðâåð. ¨í âûêàðûñòî¢çâàåöà äëÿ "
-#~ "àáñëóãî¢âàííÿ\n"
-#~ "HTML ôàéëࢠi CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) - ãýòà ñåðâåð äàìåííûõ iì¸íà¢, ÿêi âûêàðûñòî¢âàåööà äëÿ\n"
-#~ "ïåðàêëàäàííÿ iì¸í âóçëî¢ ó IP àäðàñû."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "êàëi ëàñêà, ïàçíà÷öå òûï âàøàé ìûøû."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Âûõàä"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "À¢òàìàíöiðàâàííå çìåííûõ íàçàïàøâàëüí³êà¢"
-
-#~ msgid "Active"
-#~ msgstr "Àêòû¢íû"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Íå"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Ïðûíòýð ìàäýëi \"%s\" çíîéäçåíû íà "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Ëàêàëüíû ïðûíòýð"
-
-#~ msgid "Printer Device"
-#~ msgstr "Ïîðò ïðûíòýðó"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Àääàëåíû ñåðâåð CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mouse Systems"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "²íøûÿ"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Êàëi ëàñêà, àáÿðûöå òûï êëàâiÿòóðû."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Íàö³ñí³öå íà ðàçäçåë"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Òûï: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Äðýííû ôàéë ðýçåðâîâàé êîïii"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Íàñòðîéêà X Window"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Ïîðò ïðûíòýðó"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Àäìåíà"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Îê"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Ïîðò ìûøû"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "Root"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Àáÿðûöå ïàæàäàíû ïàìåð óñòàëÿâàííÿ"
-
-#~ msgid "Total size: "
-#~ msgstr "Àãóëüíû ïàìåð: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Ïà÷àêàéöå, êàëi ëàñêà, "
-
-#~ msgid "Total time "
-#~ msgstr "Àãóëüíû ÷àñ "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Âûêàðûñòàöü iñíóþ÷óþ íàñòðîéêó äëÿ X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Äà ÿêîãà ïîðòó äàëó÷àíû âàø ïðûíòýð \n"
-#~ "(/dev/lp0 ýêâiâàëåíòíû LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Óâàãà, ñåòêàâû àäàïòàð ñêàíôiãóðàâàíû.\n"
-#~ "Öi æàäàåöå ïåðàêàíôiãóðàâàöü ÿãî?"
-
-#~ msgid "New"
-#~ msgstr "Íîâû"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Çíiø÷ûöü"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Íàö³ñí³öå íà ðàçäçåë"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Íåâûçíà÷àíàñöü (%s), áóäçüöå äàêëàäíûÿ\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (çìî¢÷àííå %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Âàø âûáàð? (çìî¢÷àííå %s. Óâÿäçiöå `none' ïðû àäñóòíàñöi) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Öi æàäàåöå ïðàòýñöiðàâàöü íàñòðîéêi?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Âû çãîäíûÿ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Êàëi âû íå âåäàåöå äàêëàäíà, äûê çâû÷àéíûì âûáàðàì ç'ÿ¢ëÿåööà \"/dev/hda"
-#~ "\"\n"
-#~ "(ïåðøàñíû ìàéñòàð IDE äûñê) öi \"/dev/sda\" (ïåðøû SCSI äûñê)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Iìÿ çëó÷ýííÿ"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Àáÿðûöå àñíî¢íàãà êàðûñòàëüíiêà:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Êàë³ ëàñêà, çðàá³öå íåêàëüê³ ðóõࢠìûøøó."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Âû ïàâ³ííû ïðûíÿöü óìîâû ë³öýíç³³, êàá ïðàöÿãíóöü óñòàëÿâàíüíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ëàñêà, íàö³ñí³öå \"Ïðûíÿöü\", êàë³ âû çãîäíûÿ ç óìîâàì³ ë³öýíç³³.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ëàñêà, íàö³ñí³öå \"Àäâåðãíóöü\", êàë³ âû íå çãîäíûÿ ç óìîâàì³ "
-#~ "ë³öåíç³³.Óñòàëÿâàííå áóäçå ñêîí÷àíà\n"
-#~ "áÿç çìåíࢠâàøàé áÿãó÷àé êàíô³ãóðàöû³."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Àáÿðûöå ðàñêëàäêó ñâà¸é êëàâiÿòóðû ç ïðûâåäçåíàãà ñïiñó"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Êàë³ âû æàäàåöå êàá ïàñëÿ ¢ñòàëÿâàííÿ áûë³ äàñòóïíû ³íøûÿ ìîâû\n"
-#~ "(àêðàìÿ òîé, ÿêóþ âû ¢æî àáðàë³ íàïà÷àòêó ¢ñòàëÿâàííÿ), êàë³ "
-#~ "ëàñêààáÿðûöå\n"
-#~ "³õ ç âûøýé ïðûâåäçåíàãà ñï³ñó. Êàë³ âû æàäàåöå àáðàöü óñ¸ íàö³ñí³öå \"Óñå"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Àáÿðûöå: \n"
-#~ "\n"
-#~ "  - Ïà âûáàðó: Ãýòû ðýæûì ðýêàìåíäóåööà ¢ òûì âûïàäêó, êàëi âû "
-#~ "ïðàöàâàëi \n"
-#~ "    ðàíåé ç GNU/Linux, i çìîæàöå ñàìi âûáðàöü íåàáõîäíûÿ\n"
-#~ "    ïàêåòû i àáñòàëÿâàííå äëÿ âàøàãà êàìï'þòàðó. Ãëÿäçiöå íiæýé "
-#~ "ïàäðàáÿçíàñö³.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ýêñïåðò: Âûáàð ãýòàãà ðýæûìó ñâåä÷ûöü, øòî âû ñâàáîäíà âàëîäàåöå GNU/"
-#~ "Linux\n"
-#~ "    i æàäàåöå âûêàðûñòî¢âàöü âåëüìi äýòàë¸âàå ¡ñòàëÿâàííå. ßê i ¢ "
-#~ "âûïàäêó \n"
-#~ "    \"Ïà âûáàðó\"âàì ïàòðýáíà áóäçå âûáðàöü íåàáõîäíûÿ ïðàãðàìû i \n"
-#~ "    àáñòàëÿâàííå âàøàãà êàìïóòàðó.\n"
-#~ "    Êàëi ëàñêà, ÍÅ ÂÛÁIÐÀÉÖÅ ÃÝÒÛ ÐÝÆÛÌ, ÊÀËI ÍÅ ¡ÏÝ¡ÍÅÍÛ, ØÒÎ ÐÎÁIÖÅ "
-#~ "ÏÐÀÂIËÜÍÀ!"
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Çàðàç âû ìàæàöå âûá³ðàöü ³íäûâ³äóàëíà óñå ïàêåòû, ÿê³ÿ æàäàåöå\n"
-#~ "óñòàëÿâàöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Âû ìîæàöå ðàçãîðòâàöü ³ çãàðòàöü äðýâà ïàêåòà¢, íàö³ñêàþ÷û íàîïöû³\n"
-#~ "ó ëåâûì êóöå âàêíà ïàêåòà¢.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âû æàäàåöå áà÷ûöü ïàêåòû ó àëôàâ³òíûì ïàðàäêó, íàö³ñí³öå îïöûþ\n"
-#~ "\"Ñàðòûðàâàöü\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âû íå æàäàåöå àòðûìë³âàöü ïàïÿðýäæàíí³ àäíîñíà çàëåæíàñöÿ¢, \n"
-#~ "íàö³ñí³öå \"Çàëåæíàñö³ à¢òàìàòû÷íà\". Êàë³ âû çðîá³öå ãýòà, çà¢âàæöå, "
-#~ "øòî\n"
-#~ "øòî íå âûáàð àäíàãî ïàêåòó âÿäçå äà íåìàã÷ûìàñö³ âûáðàöü ïàêåòû,\n"
-#~ "ÿê³ÿ àä ÿãî çàëåæàöü."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Êàëi âû ìàåöå ¢ñå CD äûñêi ñà ñïiñà íiæýé, íàöiñíiöå Îê.\n"
-#~ "Êàëi âû íå ìàåöå àíi âîäíàãà ç ãýòûõ CD äûñêà¢, íàöiñíiöå Àäìÿíiöü.\n"
-#~ "Êàëi íåêàòîðûõ ç CD äûñêࢠíå ìàåöå, àäìÿíiöå iõ âûäçÿëåííå i íàöiñíiöå "
-#~ "Îê."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Êàë³ âû æàäàåöå ïàäêëþ÷ûöü âàø êîìï'þòàð äà Internet ö³ ËÂÑ, êàë³ ëàñêà,\n"
-#~ "àáÿðûöå ïðàâ³ëüíóþ îïöûþ. Óêëþ÷ûöå âàøó ïðûëàäó ïåðàä âûáàðàì ïðàâ³ëüíàé "
-#~ "îïöû³, DrakXçíîéäçå ãýòà\n"
-#~ "à¢òàìàòû÷íà\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âàì íå ïàòðýáíà ïàäêëþ÷ýííå äà Internet ö³ ËÂÑ, íàö³ñí³öå\n"
-#~ "\"Àäêëþ÷ûöü ïàäòðûìêó ñåòê³\".\n"
-#~ "Êàë³ âû æàäàåöå àäêàíô³ãóðàâàöü ñåòêó ïàñëÿ ¢ñòàëÿâàííÿ ö³ âû "
-#~ "¢æîñêîí÷ûë³\n"
-#~ "ÿå êàíô³ãóðàâàííå, íàö³ñí³öå \"Âûêàíàöü\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Ìàäýì íå çíîéäçåíû. Àáÿðûöå ïàñëÿäî¢íû ïîðò äà ÿêîãà ¸í ïàäêëþ÷àíû.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïåðøû ïàñëÿäî¢íû ïîðò (çâàíû \"COM1\" ó Microsoft Windows) çàâåööà\n"
-#~ "\"ttyS0\" ó Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Çàðàç âû ìîæàöå ¢âåñö³ ïàðàìåòðû àääàëåíàãà ïàäëþ÷ýííÿ.\n"
-#~ "Êàë³ âû íå âåäàåöå ö³ íå ¢ïý¢íåíû øòî òðýáà ¢âåñö³, ñïûòàéöåñÿ ó "
-#~ "ñâàéãî²nternet\n"
-#~ "ïðàâàéäýðó. Êàë³ âû íå ¢âîäç³öå ³íôàðìàöûþ àá DNS ñåðâåðàõ, ÿíà áóäçå \n"
-#~ "àòðûìàíà ïàä ÷àñ çëó÷ýííÿ ç âàøûì Internet-ïðàâàéäýðàì."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Êàë³ ¢ âàñ âîíêàâû ìàäýì, êàë³ ëàñêà, óêëþ÷ûöå ÿãî, ³ ïîòûì DrakXçíîéçå "
-#~ "ÿãî à¢òàìàòû÷íà."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Êàë³ ëàñêà, óêëþ÷ûöå ìàäýì ³ àáÿðûöå ïðàâ³ëíû."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Êàë³ âû íå óïý¢íåíû, ö³ ç'ÿ¢ëÿåööà âûøýé ïðûâåäçåíàÿ\n"
-#~ "³íôàðìàöûÿ êàðýêòíàé ö³ âû íå âåäàåöå àëüáî íÿ¢ïý¢íåíûÿ øòî òðýáà óâåñö³\n"
-#~ "ïðàâèëüíàÿ\n"
-#~ "³íôàðìàöûÿ ìîæà áûöü àòðûìàíà àä âàøàãà ïðàâàéäýðó Internet. Êàë³ âû íå\n"
-#~ "¢âîäç³öå ³íôàðìàöûþ àá DNS, ãýòàÿ ³íôàðìàöûÿ áóäçå àòðûìàíà àä âàøàãà\n"
-#~ "ïðàâàéäýðó ïàä ÷àñ çëó÷ýííÿ."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Çàðàç ìîæíà ¢âåñöi ïàðàìåòðû çëó÷ýííÿ ïðàç ìàäýì (dialup). Êàëi âû\n"
-#~ "íå âåäàåöå, øòî ïàòðýáíà ïiñàöü,\n"
-#~ "ïàñïðàáóéöå àòðûìàöü äàêëàäíóþ iíôàðìàöûþ ¢ ñâàéãî ïðàâàéäýðó Internet "
-#~ "(ISP)."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Êàë³ íåàáõîäíà, âû ìàæàöå óâåñö³ ³ìÿ âàøàãà õàñòà. Êàë³ âû\n"
-#~ "íå âåäàåöå ö³ íå ¢ïå¢íåíûÿ, øòî òðýáà ¢âàäç³öü. Ïàê³íöå ïîëå ïóñòûì."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Êàë³ íåàáõîäíà, âû ìàæàöå óâåñö³ ³ìÿ âàøàãà õàñòà. Êàë³ âû\n"
-#~ "íå âåäàåöå ö³ íå ¢ïå¢íåíûÿ, øòî òðýáà ¢âàäç³öü. Ïàê³íöå ïîëå ïóñòûì."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Çàðàç ìîæíà ¢âåñöi ïàðàìåòðû çëó÷ýííÿ ïðàç ìàäýì (dialup). Êàëi âû\n"
-#~ "íå âåäàåöå, øòî ïàòðýáíà ïiñàöü,\n"
-#~ "ïàñïðàáóéöå àòðûìàöü äàêëàäíóþ iíôàðìàöûþ ¢ ñâàéãî ïðàâàéäýðó Internet "
-#~ "(ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Êàëi âû çáiðàåöåñÿ âûêàðûñòî¢âàöü proxy, iõ àäðàñû ìîæíà ¢âåñöi çàðàç.\n"
-#~ "Êàëi âû íå âåäàåöå, àá ÷ûì iäçå ðàçìîâà, çâÿðíiöåñÿ äà àäìiíiñòðàòàðà\n"
-#~ "ñåòêi öi äà Internet-ïðàâàéäýðó."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Çàðàç âû ìîæàöå àáðàöü ÷àñàâû ïîÿñ çãîäíà ç ìåñöàì æûõàðñòâà."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Âû ìîæàöå êàíô³ãóðàâàöü ëàêàëüíû ïðûíòýð (çëó÷àíû ç âàøûì êàìï'þòàðàì)\n"
-#~ "ö³ àääàëåíû ïðûíòýð (äàñòóïíû ïðàç Unix, Netware ö³ ñåòêó MS Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Êàë³ âû æàäàåöå ìåöü äðóê, êàë³ ëàñêà, àáÿðûöå àäíó ç ñ³ñòýìࢠäðóêó\n"
-#~ "CUPS ö³ LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ãýòà íîâàÿ, ìàãóòíàÿ ³ ãíóòêàÿ ñ³ñòýìà äðóêó äëÿ Unix ñ³ñòýìࢠ"
-#~ "(CUPS\n"
-#~ "- \"Common Unix Printing System\"). Ãýòà ñ³ñòýìà äðóêó ïà çìî¢÷àííþ¢\n"
-#~ "àïåðàöûéíàé ñ³ñòýìå Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR - ñòàðàÿ ñ³ñòýìà äðóêó ¢ ïàïÿðýäí³õ âåðñ³ÿõ äûñòðûáþòûâóMandrake "
-#~ "Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âû íå ìàåöå ïðûíòýðó, íàö³ñí³öå \"Íÿìà\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ìîæà ïðàöàâàöü ñà øìàòë³ê³ì³ òûïàì³ ïðûíòýðà¢. Êîæíû ç êàòîðûõ\n"
-#~ "ïàòðàáóå ðîçíàå ¢ñòàëÿâàííå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ïðûíòàð ô³ç³÷à ïàäêëþ÷àíû äà êàìï'þòåðó, àáÿðûöå \"Ëàêàëüíû\n"
-#~ "ïðûíòýð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ïðûíòàð ïàäêëþ÷àíû äà àääàëåíàé Unix ìàøûíû, àáÿðûöå\n"
-#~ "\"Àääàëåíû ïðûíòýð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ ïðûíòýð ïàäêëþ÷àíû äà àääàëåíàé ìàøûíû Microsoft Windows (ö³ äà "
-#~ "Unix\n"
-#~ "ìàøûíû, ÿêàÿ âûêàðûñòî¢âàå ïðàòàêîë SMB), àáÿðûöå \"SMB/Windows 95/98/NT"
-#~ "\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Êàë³ ëàñêà ¢êëþ÷ûöå âàø ïðûíòàð ïåðàä ïðàöÿãàì,³ DrakX çíîéäçå ÿãî.\n"
-#~ "\n"
-#~ "Âû ïàâ³ííû ¢âåñüö³ íåêàòîðóþ ³íôàðìàöûþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ²ìÿ ïðûíòýðó: ÷àðãà ïðûíòýðó âûêàðûñòî¢âàå ïà çìî¢÷àííþ ³ìÿ \"lp\"ÿê "
-#~ "³ìÿ ïðûíòýðó\n"
-#~ "Òàê, âû ïàâ³ííû ìåöü ïðûíòàð çâàíû \"lp\".\n"
-#~ "     Êàë³ âû ìàåöå òîëüê³ àäç³í ïðûíòàð, âû ìîæàöå ìåöü äëÿ ÿãî "
-#~ "íåêàëüê³íàçâà¢. Âû òîëüê³ ïàâ³ííû àääçÿë³öü ³õ ë³÷áàé êàíàëó ( \"|\").\n"
-#~ "     Òàê, êàë³ ëþá³öå áîëüø ³íôàðìàöûéíûÿ íàçâû, âû ïàâ³ííû óñòàâà³öü "
-#~ "ñïÿðøà ÿå , ïðûêë.: \"My printer|lp\".\n"
-#~ "     Ïðûíòýð ç ³ìåì \"lp\" áóäçå çàäàäçåíû ïðûíòýðàì ïà çìî¢÷àííþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Àï³ñàííå: ãýòà íåàáàâÿçêîâà, àëå ìîæà áûöü êàðûñíà, êàë³ íåêàëüê³ "
-#~ "ïðûíòýðࢠçëó÷àíû çâàøûì êàìï'þòåðàì ö³ âû íå\n"
-#~ "     äàçâàëÿåöå äîñòóï ³íøûì êàìï'þòåðàì äà ãýòàãà ïðûíòýðó.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ðàçìÿø÷ýííå: êàë³ âû æàäàåöå ðàçìÿñöiöü ïý¢íóþ ³íôàðìàöûþ àäíîñíà\n"
-#~ "     ðàçìÿø÷ýííÿ ïðûíòýðà, óñòà¢öå ÿå ñþäû (âû âîëüíûÿ ï³ñàöü óñ¸ øòî\n"
-#~ "     çà¢ãîäíà, íàïðûêëàä \"2nd floor\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Òóò âû ïàâ³ííû óâåñö³ íåêàòîðóþ ³íôàðìàöûþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ²ìÿ ÷àðã³: âûêàðûñòî¢âàåööà \"lp\" ÿê ³ìÿ ïðûíòýðó ïà çìî¢÷àííþ. "
-#~ "Òàê, âû ïàâ³ííû ìåöü ïðûíòýð çâàíû \"lp\".\n"
-#~ "     Êàë³ âû ìàåöå òîëüê³ àäç³í ïðûíòàð, âû ìîæàöå ìåöü äëÿ ÿãî "
-#~ "íåêàëüê³íàçâà¢. Âû òîëüê³ ïàâ³ííû àääçÿë³öü ³õ ë³÷áàé êàíàëó ( \"|\").\n"
-#~ "     Òàê, êàë³ ëþá³öå áîëüø ³íôàðìàöûéíûÿ íàçâû, âû ïàâ³ííû óñòàâà³öü "
-#~ "ñïÿðøà ÿå , ïðûêë.: \"My printer|lp\".\n"
-#~ "     Ïðûíòýð ç ³ìåì \"lp\" áóäçå çàäàäçåíû ïðûíòýðàì ïà çìî¢÷àííþ.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Äûðûêòîðûÿ spool: ó ¸é çíàõîäçÿööà çàìîâû íà âûêàíàííå äðóêó. "
-#~ "Çàõàâàéöå àáðàíàå\n"
-#~ "     ïà çìî¢÷àííþ, êàë³ íå âåäàåöå ÿê ãýòûì êàðûñòàööà.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ïàäêëþ÷ýííå ïðûíòýðó: êàë³ ïðûíòýð ô³ç³÷íà çëó÷àíû ç êàìï'þòåðàì, "
-#~ "àáÿðûöå \"Ëàêàëüíû ïðûíòýð\".\n"
-#~ "     Êàë³ ïðûíòýð ïàäêëþ÷àíû äà àääàëåíàé Unix ìàøûíû, àáÿðûöå \"Àääàëåíû "
-#~ "lpd ïðûíòýð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Êàë³ âû ïðûíòýð ïàäêëþ÷àíû äà àääàëåíàé ìàøûíû MS Windows (ö³ äà "
-#~ "Unix ìàøûíû, ÿêàÿ âûêàðûñòî¢âàå ïðàòàêîë SMB,\n"
-#~ "     àáÿðûöå \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Êàë³ ïðûíòàð ïàäêëþ÷àíû äà ñåòê³ NetWare, àáÿðûöå \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Âàø ïðûíòàð íå áû¢ çíîéäçåíû. Êàë³ ëàñêà ¢âÿäç³öå ³ìÿ ïðûëàäû äà ÿêîé ¸í\n"
-#~ "ïàäêëþ÷àíû.\n"
-#~ "\n"
-#~ "\n"
-#~ "Áîëüøàñü ïðûíòàðࢠïàäêëþ÷àþööà äà ïåðøàãà ïàðàëåëüíàãà ïîðòó.¨í\n"
-#~ "çàâåööà \"/dev/lp0\" ó GNU/Linux ³ \"LPT1\" ó Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Âû ïàâ³ííû àáðàöü âàø ïðûíòàð ñà ñï³ñó."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Êàë³ ëàñêà, àáÿðûöå ïðàâ³ëíûÿ îïöû³ ¢ àäïàâåäíàñüö³ âàøàìó ïðûíòàðó.\n"
-#~ "Êàë³ ëàñêà,ãëÿäç³öå äàêóìåíòàöûþ êàë³ íå âåäàåöå øòî àáðàöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàë³ âû æàäàåöå, âû áóäçåöå çäîëüíûÿ ïðàòýñòàâàöü âàøóþ êàíô³ãóðàöûþ\n"
-#~ "íà íàñòóïíûì êðîêó ³ çüìÿí³öü ÿå."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Çàðàç âû ìîæàöå ñòâàðûöü àäçií àëüáî íåêàëüêi \"çâû÷àéíûõ\" óëiêîâûõ "
-#~ "çàïiñà¢\n"
-#~ "êàðûñòàëüíiêà¢. Äëÿ êîæíàãà êàðûñòàëüíiêà ìàã÷ûìà ñòâàðûöü ïà àäíàìó öi "
-#~ "íåêàëüêi\n"
-#~ "¢ëiêîâûõ çàïiñà¢. Äëÿ êîæíàãà ¢ëiêîâàãà çàïiñó ñòâàðàþööà ¢ëàñíûÿ "
-#~ "íàñòðîéêi\n"
-#~ "(ãðàôi÷íàå àññÿðîääçå, íàñòðîéêi ïðàãðàì,...) i ¢ëàñíû \"õàòíi êàòàëàã"
-#~ "\",\n"
-#~ "ó ÿêiì çàõî¢âàþööà ãýòûÿ íàñòðîéêi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïà-ïåðøàå, ñòâàðûöå ¢âàõîä äëÿ ñÿáå! Íàâàò êàëi âû áóäçåöå àäçiíûì\n"
-#~ "êàðûñòàëüíiêàì ãýòàé ìàøûíû, íå ðýêàìåíäóåööà óâàõîäçiöü ç ïðàâàìi\n"
-#~ "ñóïåðêàðûñòàëüíiêó äëÿ øòîäç¸ííàé ïðàöû: ãýòà çàíàäòà âÿëiêàÿ ïàãðîçà\n"
-#~ "áÿñïåêi. Ìàã÷ûìà çíiø÷ûöü ñiñòýìó çâû÷àéíàé ïàìûëêàé äðóêó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Òàìó ¢âàõîäçiöü ó ñiñòýìó íåàáõîäíà ç ïðàâàìi çâû÷àéíàãà êàðûñòàëüíiêó,\n"
-#~ "ÿêîãà âû çàðàç i ñòâîðûöå, à ¢âàõîäçiöü ç ïðàâàìi root íåàáõîäíà òîëüêi\n"
-#~ "ç ìýòàìi àäìiíiñòðûðàâàííÿ i àáñëóãî¢âàííÿ ñiñòýìû."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ñòâàðýííå boot äûñêó ñòðîãà ðýêàìåíäàâàíà! Êàë³ âû íå çìîæàöå\n"
-#~ "çàãðóç³öü âàø êàìï'þòàð, äûê ãýòà âàø àäç³íû ñïîñàá àäíàâ³öü\n"
-#~ "ñ³òýìû áåç åéíàãà ïåðà¢ñòàëÿâàíüíÿ."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Àñíî¢íûÿ ïàðàìåòðû SILO:\n"
-#~ "  - Óñòàëÿâàííå çàãðóç÷ûêó: Àáÿðûöå ìåñöà, äçå âû æàäàåöå çìåñöiöü\n"
-#~ "iíôàðìàöûþ, ïàòðýáíóþ äëÿ çàãðóçêi GNU/Linux. Êàëi íå ¢ïý¢íåíû, øòî\n"
-#~ "ðîáiöå ïðàâiëüíà, àáÿðûöå \"Ïåðøû ñåêòàð äûñêà (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Çàòðûìêà ïà çìî¢÷àííþ ïåðàä çàãðóçêàé âîáðàçó: Çàäàå ÷àñ ó äçÿñÿòûõ\n"
-#~ "ñåêóíäû, íà ïðàöÿãó ÿêîãà çàãðóç÷ûê ÷àêàå ïåðàä çàãðóçêàé âîáðàçó ïà "
-#~ "çìî¢÷àííþ.\n"
-#~ "Ãýòû ïàðàìåòàð êàðûñíû äëÿ ñiñòýìà¢, ÿêiÿ àäðàçó çàãðóæàþööà ç æîðñòêàãà\n"
-#~ "äûñêó àäðàçó àïàñëÿ ¢êëþ÷ýííÿ êëàâiÿòóðû. Çàãðóç÷ûê íå ÷àêàå, êàëi "
-#~ "\"çàòðûìêà\"\n"
-#~ "\"çàòðûìêà\" íå áóäçå ïàçíà÷àíà öi óñòàëÿâàíà íà íîëü."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ãýòû çàãðóç÷ûê äëÿ SPARC. ¨í ìîæà çàãðóçiöü äðóãóþ\n"
-#~ "GNU/Linux öi ëþáóþ iíøóþ àïåðàöûéíóþ ñiñòýìó, óñòàëÿâàíóþ íà êàìïóòàðû.\n"
-#~ "Çâû÷àéíà, ãýòûÿ iíøûÿ àïåðàöûéíûÿ ñiñòýìû êàðýêòíà âûçíà÷àþööà i\n"
-#~ "¢ñòà븢âàþööà. Êàëi ãýòà íå àòðûìàëàñÿ, òî âû ìîæàöå äàäàöü ëþáû çàïiñ\n"
-#~ "ñàìàñòîéíà. Áóäçüöå ¢ïý¢íåíû, øòî âû çàäàëi êàðýêòíûÿ ïàðàìåòðû.\n"
-#~ "\n"
-#~ "\n"
-#~ "Òàêñàìà âû ìîæàöå ïàæàäàöü i íå äàäâàöü iíøûÿ àïåðàöûéíûÿ ñiñòýìû.\n"
-#~ "Ó òàêiì âûïàäêó ïàòðýáíà âûäàëiöü àäïàâåäíûÿ çàïiñû. Àëå æ òàäû âàì \n"
-#~ "áóäçå ïàòðýáíû iíñòàëÿöûéíû äûñê, êàá çàãðóçiööà."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Àñíî¢íûÿ ïàðàìåòðû SILO:\n"
-#~ "  - Óñòàëÿâàííå çàãðóç÷ûêó: Àáÿðûöå ìåñöà, äçå âû æàäàåöå çìåñöiöü\n"
-#~ "iíôàðìàöûþ, ïàòðýáíóþ äëÿ çàãðóçêi GNU/Linux. Êàëi íå ¢ïý¢íåíû, øòî\n"
-#~ "ðîáiöå ïðàâiëüíà, àáÿðûöå \"Ïåðøû ñåêòàð äûñêà (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Çàòðûìêà ïà çìî¢÷àííþ ïåðàä çàãðóçêàé âîáðàçó: Çàäàå ÷àñ ó äçÿñÿòûõ\n"
-#~ "ñåêóíäû, íà ïðàöÿãó ÿêîãà çàãðóç÷ûê ÷àêàå ïåðàä çàãðóçêàé âîáðàçó ïà "
-#~ "çìî¢÷àííþ.\n"
-#~ "Ãýòû ïàðàìåòàð êàðûñíû äëÿ ñiñòýìà¢, ÿêiÿ àäðàçó çàãðóæàþööà ç æîðñòêàãà\n"
-#~ "äûñêó àäðàçó àïàñëÿ ¢êëþ÷ýííÿ êëàâiÿòóðû. Çàãðóç÷ûê íå ÷àêàå, êàëi "
-#~ "\"çàòðûìêà\"\n"
-#~ "\"çàòðûìêà\" íå áóäçå ïàçíà÷àíà öi óñòàëÿâàíà íà íîëü."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Çàðàç ìàã÷ûìà íàñòðîiöü X Window System, ÿêàÿ ç'ÿ¢ëÿåööà\n"
-#~ "àñíîâàé Linux GUI (Ãðàôi÷íû Iíòýðôåéñ Êàðûñòàëüíiêà). Äçåëÿ ãýòàãà\n"
-#~ "ïàòðýáíà íàñòðîiöü âiäýàêàðòó i ìàíiòîð. Áîëüøàÿ ÷àñòêà ãýòûõ êðîêà¢\n"
-#~ "à¢òàìàòûçàâàíà, òàìó âàøà ïðàöà ìîæà çàêëþ÷àööà ¢ ïðàâåðöû\n"
-#~ "âûíiêࢠíàñòðîéêi i ïàäöâåðäæàííþ àáðàíûõ ïàðàìåòðࢠ:)\n"
-#~ "\n"
-#~ "Êàëi êàíôiãóðàâàííå çàâåðøûööà, áóäçå çàïóø÷àíû X  (êàëi âû íå\n"
-#~ "ïàïðîñiöå DrakX íå ðàáiöü ãýòàãà), êàá âû çìàãëi ïðàâåðûöü, öi çãîäíû\n"
-#~ "âû ç íàñòðîéêàìi. Êàëi íå, òî çà¢ñ¸äû ìàã÷ûìà âÿðíóööà i çìÿíÿöü iõ\n"
-#~ "êîëüêi âàì ïàòðýáíà."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Êàëi íåøòà íå òàê ç íàñòðîéêàé X, ñêàðûñòàéöå ãýòûÿ ïàðàìåòðû äëÿ \n"
-#~ "êàðýêòíàé íàñòðîéêi X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Êàëi âû àääàåöå ïåðàâàãó ãðàôi÷íàìó ¢âàõîäó (login), àáÿðûöå \"Òàê\". "
-#~ "Iíàêø - \n"
-#~ "\"Íå\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ñiñòýìà çáiðàåööà ïåðàçàãðóçiööà.\n"
-#~ "\n"
-#~ "Ïàñëÿ ïåðàçàãðóçêi, âàøà íîâàÿ ñiñòýìà Mandrake Linux çàãðóçiööà "
-#~ "à¢òàìàòû÷íà.\n"
-#~ "Êàëi âû æàäàåöå ïåðàçàãðóçiöà ïàä iíøóþ àïåðàöûéíóþ ñiñòýìó, ÷ûòàéöå \n"
-#~ "äàäàòêîâûÿ iíñòðóêöûi."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Çàïiñ /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Ôàðìàòàâàöü óñ¸"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Ïàñëÿ ôàðìàòàâàííÿ ¢ñiõ ðàçäçåëà¢,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "óñå äàäçåíûÿ ¢ ãýòûõ ðàçäçåëàõ áóäóöü ñòðà÷àíû"
-
-#~ msgid "Reload"
-#~ msgstr "Ïåðàçàãðóçiöü"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Öi æàäàåöå âû ñòâàðûöü à¢òà¢ñòàë¸âà÷íû ôëîïi-äûñê äëÿ ðåïëiêàöûi linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Íàñòðîéêà ADSL"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Àääàëåíû CUPS ñåðâåð íå ïàòðàáóå àä Âàñ íàñòðîéê³ ïðûíòýðó\n"
-#~ "íà ãýòàé ìàøûíå, ¸í áóäçå çíîéäçåíû à¢òàìàòû÷íà.\n"
-#~ "Êàë³ Âû íå ¢ïý¢íåíû, àáÿðûöå \"Àääàëåíû ñåðâåð CUPS\"."
-
-#~ msgid "Remote queue"
-#~ msgstr "Àääàëåíàÿ ÷àðãà äðóêó"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Àääàëåíàÿ ÷àðãà äðóêó"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Iìÿ äàìåíó"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Iìÿ äðóêàðêi"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Êàíôiãóðàöûÿ ñåòêi"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "ïàìûëêà ìàíöiðàâàííÿ: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Iìÿ çëó÷ýííÿ"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Äàëó÷ýííå äà Iíòýðíýòó"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Iìÿ çëó÷ýííÿ"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Ïà äàìà¢ëåííþ"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Íå àòðûìë³âàåööà àïðàöàâàöü çìåñò ôàéëà íàñòðîåê."
-
-#~ msgid "Disable network"
-#~ msgstr "Çðàáiöü íåàêòû¢íûì ñåòêàâàå çëó÷ýííå"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Çðàáiöü íåàêòû¢íûì ñåòêàâàå çëó÷ýííå"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Çàðàç âû ìîæàöå àäòýñòàâàöü âàøó ìûø. Íàö³ñêàéöå íà êíîïê³ ³\n"
-#~ "ðóøöå êîëà. Êàë³ óñòàëÿâàíí³ ïàìûëêîâûÿ íàö³ñí³öå \"Àäìåíà\" êàá "
-#~ "óñòàëÿâàöü\n"
-#~ "³íøû äðàéâåð."
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Ïîðò ìûøû"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Âû ìîæàöå âûçíà÷ûöü íà¢ïðîñò URI êàá äàëó÷ûööà äà äðóêàðêi ç CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Òàê, íàäðóêàâàöü ñòàðîíêó òýêñòó ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Òàê, íàäðóêàâàöü ñòàðîíêó òýêñòó PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ïàìåðû ïàïåðû"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Âûøòóðõâàöü ïàïåðó ïàñëÿ äðóêó?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Ïàðàìåòðû äðàéâåðó Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Ïàðàìåòðû ãëûáiíi êîëåðó"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Äðóêàâàöü òýêñò ÿê PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Êàðýêòàâàöü ïðûñòóïêàâû òýêñò?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Íóìàð ñòàðîíêi àä êîëüêàñöi íàäðóêàâàíûõ ñòàðîíàê"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Ïðàâàå/ëåâàå ïàëi ¢ êðîïêàõ (1/72 äçþéìà)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Âåðõíÿå/Íiæíÿå ïàëi ¢ êðîïêàõ (1/72 äçþéìà)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Äàäàòêîâûÿ îïöûi GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Äàäàòêîâûÿ ïàðàìåòðû òýêñòó"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Àäâàðîòíû ïàðàäàê ñòàðîíàê"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Âûáàð òûïó çëó÷ýííÿ ç àääàëåíûì ïðûíòýðàì"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Êîæíàÿ ÷àðãà äðóêó, ó ÿêóþ àäïðà¢ëÿþööà çàäàííi äëÿ äðóêó, ïàòðàáóå "
-#~ "ïàçíà÷ýííÿ iìÿ (çâû÷àéíà lp). Äðóãiÿ ïàðàìåòðû, òàêiÿ ÿê àïiñàííå "
-#~ "äðóêàðêi öi\n"
-#~ " ÿãî ðàçìåðêàâàííå, ìîãóöü áûöü ïàçíà÷àíû. ßêîå iìÿ äà äðàêóðêi âû "
-#~ "áóäçåöå\n"
-#~ "ñêàðûñòî¢âàöü i ÿê ãýòàÿ äðóêàðêà äàëó÷àåööà?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Êîæíàÿ ÷àðãà äðóêó, ó ÿêóþ àäïðà¢ëÿþööà çàäàííi äëÿ äðóêó, ïàòðàáóå "
-#~ "ïàçíà÷ýííÿ iìÿ (çâû÷àéíà lp) i ñïàëó÷àíàãà ç ¸þ êàòàëîãó ñïóëiíãó. "
-#~ "Ïàçíà÷öå iìÿ i êàòàëîã äëÿ ÷àðãi."
-
-#~ msgid "Name of queue"
-#~ msgstr "Iìÿ ÷àðãi äðóêó"
-
-#~ msgid "Spool directory"
-#~ msgstr "Äûðýêòîðûÿ ñïóëiíãó"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Òàáëiöà"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Òàáëiöà"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Êàá óçìàöíiöü áÿñïåêó ñiñòýìû, íåàáõîäíà àáðàöü \"Ñêàðûñòàöü ñõàâàíû ôàéë"
-#~ "\"\n"
-#~ "i \"Ñêàðûñòàöü ïàðîëi MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Êàëi ¢ âàøàé ñåòöû âûêàðûñòî¢âàåööà NIS, àáÿðûöå \"Ñêàðûñòî¢âàöü NIS\". "
-#~ "Êàëi\n"
-#~ "íå âåäàåöå, çàïûòàéöå àäìiíiñòðàòàðà ñåòêi."
-
-#~ msgid "yellow pages"
-#~ msgstr "æî¢òûÿ ñòàðîíêi"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Íàñòðîéêà ADSL"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 ïðàâàéäàðó"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 ïðàâàéäàðó"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "ßê âû ïëàíóåöå äàëó÷ûööà äà Iíòýðíýòó?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Àáÿðûöå ôàéë"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "ßêi òûï âàøàãà ISDN çëó÷ýííÿ?"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Íàñòðîéêà IDE"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Íàñòðîéêà: Äàäàöü êðûíiöó"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr " Ãýòû ïóñêàâû ñêðûïò àäíà¢ëÿå ¢ñå ìîäóëi äëÿ usb ìûøû."
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Íàñòðîéêà ïàñëÿ ¢ñòàëÿâàííÿ"
-
-#, fuzzy
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Âàø êàìï'þòàð ìîæà áûöü ñêàíô³ãóðàâàíû íà ñóìåñíàå âûêàðûñòàííå\n"
-#~ " ²íòýðíýòó (Internet Connection Sharing)?\n"
-#~ "\n"
-#~ "Çà¢âàãà: âàì ïàòðýáíû ñåòêàâû àäàïòàð äëÿ ïàäêëþ÷ýííÿ äà ËÂÑ.\n"
-#~ "\n"
-#~ "Âû æàäàåöå óñòàëÿâàöü ñóìåñíû äîñòóï äà Internet?"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Ïðàâåðêà çàëåæíàñöÿ¢"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Íàñòðîéêà LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Ñòâàðûöü çàãð. äûñê"
-
-#~ msgid "Choice"
-#~ msgstr "Âûáàð"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Ìàíiòîð"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Ðîçíàå"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Äàäàòêîâûÿ ïûòàííi"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Íå ìàãó âûêàðûñòî¢âàöü ìàíöiðàâàííå ïðû âûñîêiì óçðî¢íi áÿñïåêi"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Çàñöÿðîãà: ÏÐÛ ÂÛÑÎÊIÌ ÓÇÐΡÍI ÁßÑÏÅÊI ¡ÂÀÕÎÄ ßÊ ROOT Ç ÊÀÍÑÎËI ÍÅ "
-#~ "ÄÀÇÂÀËßÅÖÖÀ!\n"
-#~ "Êàëi âû æàäàåöå ¢âàõîäçiöü ÿê root, óâàõîäçüöå ÿê êàðûñòàëüíiê, çàòûì \n"
-#~ "âûêîíâàéöå \"su\".Ó òàêiì âûïàäêó, ìîæàöå âûêàðûñòî¢âàöü ìàøûíó íå äëÿ "
-#~ "¢ñÿãî,\n"
-#~ "à òîëüêi ÿê ñåðâåð.\n"
-#~ "Ìàéöå íà ¢âàçå, øòî âû áûëi ïàïÿðýäæàíûÿ."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Áóäçüöå ¢âàæëiâû, óêëþ÷ýííå NumLock ìîæà ïðûâåñöi äà ïàìûëêîâàé\n"
-#~ "ïðàöû êëàâiÿòóðû (íàïðûêëàä, íàöiñê íà `p' äàå `6')."
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Ðàçìåðêàâàííå"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Íàâóêîâûÿ ïðûêëàäàíí³"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Ïåðøû ñåðâåð DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Äðóãi ñåðâåð DNS:"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Ðýæûì çëó÷ýííÿ"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s óæî âûêàðûñòî¢âàåööà"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Ãýòà íå êàðàí¸âû ðàçäçåë, êàëi ëàñêà àáÿðûöå iíøû."
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ìîæà âûçâàöü çíiø÷ýííå äàäçåíûõ)"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Äàäàöü êðûíiöó ïàêåòà¢"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Ïàñëÿ %s ðàçáåéöå %s,"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Ìàäýì Alcatel"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Óñå âûçíà÷àíûÿ ðàçäçåëû ïàâiííû áûöü àäôàðìàòàâàíû äëÿ âûêàðûñòàííÿ\n"
-#~ "(ôàðìàòàâàííå çíà÷ûöü ñòâàðýííå ôàéëàâàé ñiñòýìû). Ó ãýòàé ñiòóàöûi\n"
-#~ "ìîæíà ïåðàôàòàâàöü óæî iñíóþ÷ûÿ ðàçäçåëû äçåëÿ çíiø÷ýííÿ äàäçåíûõ,\n"
-#~ "ÿêiÿ çíàõîäçÿööà íà iõ. Çà¢âàãà: ôàðìàòàâàöü iñíóþ÷ûÿ ðàçäçåëû íå "
-#~ "àáàâÿçêîâà,\n"
-#~ "àñàáëiâà êàëi ÿíû çìÿø÷àþöü ôàéëû i äàäçåíûÿ, ÿêiÿ âû æàäàåöå çàõàâàöü.\n"
-#~ "Çâû÷àéíà çàõî¢âàþöü /home i /usr/local."
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Ìûø"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB Ìûø (2 êíîïêi)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB Ìûø (3 êíîïêi öi áîëåé)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB Ìûø"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB Ìûø (2 êíîïêi)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB Ìûøü (3 êíîïêi öi áîëåé)"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Âû ¢ïý¢íåíû, øòî çìîæàöå ïðàöÿãíóöü ïðàöýñ óñòàëÿâàííÿ ÿê ýêñïåðò?\n"
-#~ "Ó ãýòûì âûïàäêó Âû áóäçåöå ìåöü áîëüøû êàíòðîëü íàä ïðàöýñàì "
-#~ "óñòàëÿâàííÿ,\n"
-#~ "àëå âûíiêi ïàìûëêi ìîãóöü áûöü ôàòàëüíûÿ.\n"
-#~ "\n"
-#~ "Âàì áóäóöü çàäàäçåíû, íàïðûêëàä, òàêiÿ ïûòàííi: ``Öi âûêàðûñòî¢âàöü "
-#~ "öåíÿâû\n"
-#~ "ôàéë ïàðîëÿ¢?'' Öi ïàäðûõòàâàíû âû äà àäêàçó íà ãýòûÿ ïûòàííi?"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Çàðàç ìîæíà âûçíà÷ûöü, ÿêiÿ ðàçäçåëû âûêàðûñòî¢âàöü äëÿ ¢ñòàëÿâàííÿ\n"
-#~ "âàøàé ñiñòýìû Mandrake Linux, êàëi ÿíû ¢æî áûëi çàäàäçåíû (ïðû "
-#~ "ïàïÿðýäí³ì\n"
-#~ "¢ñòàëÿâàíí³ Linux àëüáî iíøàé ïðàöýäóðàé ðàçáiööÿ). Ó iíøûõ âûïàäêàõ\n"
-#~ "ðàçäçåëû æîðñòêàãà äûñêó ïàâiííû áûöü ïàçíà÷àíû. Ãýòà àïåðàöûÿ ñêëàäàåööà "
-#~ "ç\n"
-#~ "ëàãi÷íàãà ðàçáiööÿ äûñêàâàé ïðàñòîðû êàìï'þòýðó íà íåêàëüêi\n"
-#~ "âîáëàñöåé âûêàðûñòàííÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âû ïëàíóåöå ñòâàðàöü íîâûÿ ðàçäçåëû, òàäû ìîæàöå ñêàðûñòàöü ðýæûì\n"
-#~ "\"À¢òà ðàçìÿø÷ýííå\", êàá à¢òàìàòû÷íà ñòâàðûöü ðàçäçåëû GNU/Linux. Âû "
-#~ "ìîæàöå\n"
-#~ "ïàçíà÷ûöü äûñê äëÿ ðàçáiööÿ, íàöiñíó¢øû íà \"hda\" äëÿ ïåðøàãà IDE "
-#~ "äûñêó,\n"
-#~ "\"hdb\" äëÿ äðóãîãà äûñêó öi \"sda\" äëÿ ïåðøàãà SCSI äûñêó i ã.ä.\n"
-#~ "\n"
-#~ "\n"
-#~ "Äâà çâû÷àéíûÿ ðàçäçåëû íàñòóïíûÿ: êàðýííû ðàçäçåë (/), ÿêi ç'ÿ¢ëÿåööà "
-#~ "ïà÷àòêîâûì\n"
-#~ "ïóíêòàì iåðàðõii êàòàëàãࢠôàéëàâàé ñiñòýìû, i /boot, ÿêi çìÿø÷àå ¢ñå\n"
-#~ "ôàéëû, íåàáõîäíûÿ äëÿ çàïóñêó àïåðàöûéíàé ñiñòýìû ïðû ¢êëþ÷ýííi "
-#~ "êàìï'þòýðó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïàêîëüêi âûíiêi ãýòàãà ïðàöýñó çâû÷àéíà íåçâàðîòíûÿ, ðàçáiöö¸ íà "
-#~ "ðàçäçåëû\n"
-#~ "ìîæà íàïàëîõàöü íàâi÷êà. DiskDrake ñïðàø÷àå ãýòû ïðàöýñ, òàìó íàïðóæàííå\n"
-#~ "ïàâiííà çíiìàööà. Ïàãëÿäçiöå äàêóìåíòàöûþ i ïàäðûõòóéöåñÿ àäðàçó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Òàêñàìà ëþáóþ àïåðàöûþ íàä ðàçäçåëàì âû ìîæàöå âûêàíàöàü ç äàïàìîãàé\n"
-#~ "êëàâiÿòóðû, íàïðûêëàä ïåðàìÿø÷àööà ïàìiæ ðàçäçåëàìi ç äàïàìîãàé êëàâiøࢠ"
-#~ "Tab\n"
-#~ "i Up/Down. Êàëi ðàçäçåë àáðàíû, âû ìîæàöå âûêàðûñòî¢âàöü:\n"
-#~ "\n"
-#~ "- Ctrl-c  êàá ñòâàðûöü íîâû ðàçäçåë (êàëi ïàïÿðýäíå àáðàíû ïóñòû "
-#~ "ðàçäçåë)\n"
-#~ "\n"
-#~ "- Ctrl-d  êàá âûäàëiöü ðàçäçåë\n"
-#~ "\n"
-#~ "- Ctrl-m  êàá ïàçíà÷ûöü ïóíêò ìàíöiðàâàííÿ.\n"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "À¢òà³íñòàëÿöûÿ ôëîïi"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "À¢òàìàòû÷íàå âûçíà÷ýííå ïàìåðࢠýêðàíó"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "À¢òàìàòû÷íû ïîøóê ïàìåðࢠýêðàíó"
-
-#~ msgid "Available packages"
-#~ msgstr "Äàñòóïíûÿ ïàêåòû"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Äðýííû ñòàðòàâû (kickstart) ôàéë %s (ïàìûëêà %s)"
-
-#~ msgid "Category"
-#~ msgstr "Êàòýãîðûÿ"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Ïðàãðàìû Chat (IRC or instant messaging), òûïó xchat, licq, gaim ³ ã.ä."
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Ïðàâåðêà çàëåæíàñöÿ¢"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "%s or %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Àáÿðûöå \"Óñòàëÿâàöü\", êàëi ¢ âàñ ÿø÷ý íå ¢ñòàëÿâàíà íi âîäíàé âåðñii\n"
-#~ "GNU/Linux, àëüáî, êàëi âû æàäàåöå âûêàðûñòî¢âàöü íåêàëüêi âåðñiÿ¢ öi "
-#~ "äûñòðûáóòûâà¢.\n"
-#~ "\n"
-#~ "Àáÿðûöå \"Âûðàòàâàöü\", êàëi âû æàäàåöå âûðàòàâàöü íåïðàöóþ÷óþ ïàïÿðýäíþþ "
-#~ "âåðñiþ Mandrake Linux:\n"
-#~ "%s àëüáî %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àáÿðûöå:\n"
-#~ "\n"
-#~ "  - Ðýêàìåíäóåööà: Êàëi âû ðàíåé íiêîëi íå ¢ñòà븢âàëi \n"
-#~ "    GNU/Linux, âûáÿðûöå ãýòû ðýæûì.\n"
-#~ "\n"
-#~ "  - Ïà âûáàðó: Ãýòû ðýæûì ðýêàìåíäóåööà ¢ òûì âûïàäêó, êàëi âû "
-#~ "ïðàöàâàëi \n"
-#~ "    ðàíåé ç GNU/Linux, i çìîæàöå ñàìi âûáðàöü íåàáõîäíûÿ\n"
-#~ "    ïàêåòû i àáñòàëÿâàííå äëÿ âàøàãà êàìïóòàðó. Ãëÿäçiöå íiæýé "
-#~ "ïàäðàáÿçíàñö³.\n"
-#~ "\n"
-#~ "  - Ýêñïåðò: Âûáàð ãýòàãà ðýæûìó ñâåä÷ûöü, øòî âû ñâàáîäíà âàëîäàåöå GNU/"
-#~ "Linux\n"
-#~ "    i æàäàåöå âûêàðûñòî¢âàöü âåëüìi äýòàë¸âàå ¡ñòàëÿâàííå. ßê i ¢ "
-#~ "âûïàäêó\n"
-#~ "    \"Ïà âûáàðó\"âàì ïàòðýáíà áóäçå âûáðàöü íåàáõîäíûÿ ïðàãðàìû i \n"
-#~ "    àáñòàëÿâàííå âàøàãà êàìïóòàðó.\n"
-#~ "    Êàëi ëàñêà, ÍÅ ÀÁIÐÀÉÖÅ ÃÝÒÛ ÐÝÆÛÌ, ÊÀËI ÍÅ ¡ÏÝ¡ÍÅÍÛ, ØÒÎ ÐÎÁIÖÅ "
-#~ "ÏÐÀÂIËÜÍÀ!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Àáÿðûöå \"Óñòàëÿâàöü\", êàëi ¢ âàñ ÿø÷ý íå ¢ñòàëÿâàíà íi àäíîé âåðñii\n"
-#~ "GNU/Linux, àëüáî, êàëi âû æàäàåöå âûêàðûñòî¢âàöü íåêàëüêi âåðñiÿ¢ öi "
-#~ "äûñòðûáóòûâà¢.\n"
-#~ "\n"
-#~ "Àáÿðûöå \"Âûðàòàâàöü\", êàëi âû æàäàåöå âûðàòàâàöü íåïðàöóþ÷óþ ïàïÿðýäíþþ "
-#~ "âåðñiþ Mandrake Linux:\n"
-#~ "\n"
-#~ "\n"
-#~ "Àáÿðûöå:\n"
-#~ "\n"
-#~ "  - Ðýêàìåíäóåööà: Êàëi âû ðàíåé íiêîëi íå ¢ñòà븢âàëi \n"
-#~ "    GNU/Linux, àáÿðûöå ãýòû ðýæûì.\n"
-#~ "\n"
-#~ "  - Ïà âûáàðó: Ãýòû ðýæûì ðýêàìåíäóåööà ¢ òûì âûïàäêó, êàëi âû "
-#~ "ïðàöàâàëi \n"
-#~ "    ðàíåé ç GNU/Linux, i çäîëååöå ñàìi âûáðàöü íåàáõîäíûÿ\n"
-#~ "    ïàêåòû i àáñòàëÿâàííå äëÿ âàøàãà êàìïóòàðó. Ãëÿäçiöå íiæýé "
-#~ "ïàäðàáÿçíàñö³.\n"
-#~ "\n"
-#~ "  - Ýêñïåðò: Âûáàð ãýòàãà ðýæûìó ñâåä÷ûöü, øòî âû ñâàáîäíà âàëîäàåöå GNU/"
-#~ "Linux\n"
-#~ "    i æàäàåöå âûêàðûñòî¢âàöü âåëüìi äýòàë¸âàå ¡ñòàëÿâàííå. ßê i ¢ "
-#~ "âûïàäêó \n"
-#~ "    \"Ïà âûáàðó\"âàì ïàòðýáíà áóäçå âûáðàöü íåàáõîäíûÿ ïðàãðàìû i \n"
-#~ "    àáñòàëÿâàííå âàøàãà êàìïóòàðó.\n"
-#~ "    Êàëi ëàñêà, ÍÅ ÀÁIÐÀÉÖÅ ÃÝÒÛ ÐÝÆÛÌ, ÊÀËI ÍÅ ¡ÏÝ¡ÍÅÍÛ, ØÒÎ ÐÎÁIÖÅ "
-#~ "ÏÐÀÂIËÜÍÀ!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
-#~ "Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
-#~ "(Helios) or Gold 2000."
-#~ msgstr ""
-#~ "Àáÿðûöå \"Óñòàëÿâàííå\", êàëi íÿìà ¢ñòàëÿâàíûõ ðàíåé âåðñ³ÿ¢ Linux,\n"
-#~ "àëüáî êàëi æàäàåöå âûêàðûñòî¢âàöü íåêàëüêi äûñòðûáóòûâࢠàëüáî âåðñûÿ¢.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àáÿðûöå \"Àáíàâiöü\" êàëi âû æàäàåöå àáíàâiöü ïàïÿðýäíþþ âåðñiþ\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios) àëüáî Gold 2000."
-
-#~ msgid "Collapse all"
-#~ msgstr "Çãàðíóöü óñ¸"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Ñðîäê³ êàìóí³êàöûÿ¢"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Íàñòðîéêà ñåòêi (ËÂÑ)"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Íàñòðîéêà ÷àñàâîãà ïîÿñó"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Ïàäöâåðäçiöü ïàðîëü"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Äàëó÷ûööà äà Iíòýðíýò ïðàç êàáåëü (ñåòêó)"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Äàëó÷ûööà äà iíòýðíýò ïðàç DSL (öi ADSL)"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Çëó÷ýííå ç iíòýðíýò ïà ISDN"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Çëó÷ýííå ç iíòýðíýò ïðàç çâû÷àéíû ìàäýì"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM ``bind'' ç äàïàìîãàé urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr ""
-#~ "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM êýøóþ÷àãà ñåðâåðó ³ì¸íࢠç äàïàìîãàé "
-#~ "urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM ``dhcp'' ç äàïàìîãàé urpmi."
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM ``ipchains'' ç äàïàìîãàé urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Íå àòðûìë³âàåööà ¢ñòàëÿâàöü RPM ``linuxconf'' ç äàïàìîãàé urpmi."
-
-#~ msgid "Cryptographic"
-#~ msgstr "Êðûïòàãðàôiÿ"
-
-#~ msgid "Customized"
-#~ msgstr "Ïà âûáàðó"
-
-#~ msgid "Czech"
-#~ msgstr "×åøñêi"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Ñåðâåðû ³ êë³åíòû áàçࢠäàäçåíûõ (mysql and postgresql)"
-
-#~ msgid "Directory"
-#~ msgstr "Êàòàëîã"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Íå ¢ñòà븢âàöü ñåòêó"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Öi æàäàåöå âû íàñòðîiöü ISDN çëó÷ýííå ¢ âàøàé ñiñòýìå?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Öi æàäàåöå âû íàñòðîiöü êàìóòàâàíàå çëó÷ýííå ïðàç ìàäýì äà ñiñòýìû?"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Öi æàäàåöå âû íàñòðîiöü ñåòêàâóþ êàíôiãóðàöûþ âàøàé ñiñòýìû?"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Çàãðóçêà êðûïòàãðàôi÷íûõ ïàêåòà¢"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX ñïà÷àòêó ïàñïðàáóå çíàéöi àäçií öi íåêàëüêi àäàïòýðࢠPCI\n"
-#~ "i SCSI. Êàëi àäàïòýð çíîéäçåí, i DrakX âÿäîìà, ÿêi äðàéâåð\n"
-#~ "äëÿ ÿãî ïàòðýáíû, ãýòàÿ ïðûëàäà áóäçå äàëó÷àíà à¢òàìàòû÷íà.\n"
-#~ "\n"
-#~ "Êàëi âû ìàåöå SCSI àäàïòýð íà ISA-, àëüáî PCI-êàðöå, àëå DrakX íå âåäàå\n"
-#~ "ÿêi äðàéâåð ñêàðûñòàöü ç ãýòàé êàðòàé, öi DrakX ëè÷ûöü, øòî âû íå ìàåöå\n"
-#~ "SCSI àäàïòýðࢠíàâîãóë, ó âàñ çàïûòàþöü, öi ¸ñöü ¸í ó âàñ àëüáî íå.\n"
-#~ "Êàëi ¢ âàñ ÿãî íÿìà, àäêàçâàéöå \"Íå\". Êàëi ¸ñòü àäçií öi íåêàëüêi,\n"
-#~ "àäêàçâàéöå \"Òàê\". Ïàñëÿ ãýòàãà ç'ÿâiööà ñïiñ äðàéâåðà¢, ç ÿêiõ âàì\n"
-#~ "ïàòðýáíà áóäçå âûáðàöü ïàäûõîäçÿ÷û.\n"
-#~ "\n"
-#~ "Ïàñëÿ âûáàðó äðàéâåðó, DrakX çàïûòàå, öi íå æàäàåöå âû çàäàöü\n"
-#~ "äëÿ ÿãî äàäàòêîâûÿ íàñòðîéêi. Ñïà÷àòêó íÿõàé äðàéâåð ïðàâåðûöü "
-#~ "àáñòàëÿâàííå:\n"
-#~ "çâû÷àéíà ¢ñ¸ ïðàöóå äîáðà.\n"
-#~ "\n"
-#~ "Ó àäâàðîòíûì âûïàäêó, íå çàáûâàéöåñÿ ïðà iíôàðìàöûþ àá àáñòàëÿâàííi, "
-#~ "ÿêóþ\n"
-#~ "ìîæíà àòðûìàöü àä Windows (êàëi ÿíà ïðûñóòíi÷àå ¢ âàøàé ñiñòýìå), à "
-#~ "òàêñàìà\n"
-#~ "ïðà äàïàìîæíiê ïà ¢ñòàíí³ ãýòàé ïðûëàäû. ßíû çìÿø÷àþöü òûÿ íàñòðîéêi, "
-#~ "ÿêiÿ\n"
-#~ "íåàáõîäíà çàäàöü äðàéâåðó."
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX ñòâîðûöü êàíôiãóðàöûéíûÿ ôàéëû äëÿ XFree 3.3 i XFree 4.0.\n"
-#~ "Ïà äàìà¢ëåííþ âûêàðûñòî¢âàåööà ñåðâåð 4.0. Êàëi Âàøà âiäýàêàðòà íå\n"
-#~ "ïàäòðûìëiâàåööà iì, òàäû ìîæíà âûêàðûñòàöü ñåðâåð 3.3.\n"
-#~ "Öi æàäàåööå âû ïàêiíóöü XFree 3.3 ¢ ñiñòýìå?"
-
-#~ msgid "ECI modem"
-#~ msgstr "Ìàäýì ECI"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Óêëþ÷ýííå num lock ïðû ñòàðöå"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Óñòà¢öå äûñêåòó äëÿ çàïiñó çàãðóç÷ûêó ç HTP\n"
-#~ "(óñå äàäçåíûÿ íà ãýòàé äûñêåöå áóäóöü çíiø÷àíû)"
-
-#~ msgid "Everything configured!"
-#~ msgstr "¡ñ¸ ñêàíôiãóðàâàíà!"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Óñ¸ ñêàíôiãóðàâàíà.\n"
-
-#~ msgid "Expand all"
-#~ msgstr "Ðàçãàðíóöü óñ¸"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "Íå àòðûìàëàñü ñòâàðûöü çàãð. äûñêåòó ç HTP.\n"
-#~ "Ìàã÷ûìà, ïàòðýáíà ïåðàçàïóñöiöü óñòàëÿâàííå ç ``%s'' ó çàïðàøýííi"
-
-#~ msgid "Find Package"
-#~ msgstr "Ïîøóê ïàêåòà¢"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Çíàéñöi ïàêåò, ÿêi ìàå ôàéë"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Ïîøóê ëiñòî¢"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Ïîøóê ëiñòî¢ ïàòðàáóå íåêàòîðû ÷àñ"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Äëÿ FTP i HTTP, âû ïàâiííû ïàçíà÷ûöü ðàçìÿø÷ýííå hdlist\n"
-#~ "Çàäàâàéöå àäíîñíà ðàíåé ïàçíà÷àíàãà URL"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Çàáûöü çìÿíåííi?"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux ìîæà ïðàöàâàöü ñà øìàòëiêiìi òûïàìi äðóêàâàëüíûõ ïðûëàäà¢. Êîæíû ç "
-#~ "ãýòûõ\n"
-#~ "òûïࢠïàòðàáóå ðîçíàãà ¢ñòàëÿâàííÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âàøà ïðûëàäà äëÿ äðóêàâàííÿ äàëó÷àíà íåïàñðýäíà äà ãýòàãà "
-#~ "êàìï'þòýðó,\n"
-#~ "àáÿðûöå \"Ëàêàëüíû ïðûíòýð\". Âàì áóäçå ïàòðýáíà âûçíà÷ûöü, äà ÿêîãà "
-#~ "ïîðòó\n"
-#~ "äàëó÷àíà ïðûëàäà i âûáðàöü ïàäûõîäçÿ÷û ôiëüòð.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âû æàäàåöå àòðûìàöü äîñòóï äà ïðûíòýðó, ÿêi çíàõîäçiööà íà "
-#~ "àääàëåíàé\n"
-#~ "ìàøûíå Unix, íåàáõîäíà âûáðàöü \"Àääàëåíàÿ ÷àðãà lpd\". Êàá ïðûìóñiöü "
-#~ "ÿãî\n"
-#~ "ïðàöàâàöü, iìÿ i ïàðîëü íå ïàòðýáíû, àëå íåàáõîäíà âåäàöü iìÿ ÷àðãi "
-#~ "äðóêó\n"
-#~ "íà ãýòàì ñåðâåðû.\n"
-#~ "\n"
-#~ "\n"
-#~ "Äëÿ äîñòóïó äà ïðûíòýðó SMB (ÿêi çíàõîäçiööà íà àääàëåíàé ìàøûíå\n"
-#~ "Windows 9x/NT/2000 öi Unix ç ñåðâåðàì Samba), íåàáõîäíà âåäàöü ÿãî iìÿ\n"
-#~ "SMB (ÿêîå ìîæà íå ñóïàäàöü ç ÿãî iìåíåì ó ñåòêi TCP/IP), i, ìàã÷ûìà,\n"
-#~ "ÿãî IP àäðàñ i iìÿ êàðûñòàëüíiêó, ðàáî÷àé ãðóïû i ïàðîëü äîñòóïó äà\n"
-#~ "ïðûíòýðó, à òàêñàìà iìÿ ïðûíòýðó. Òîå æ ñàìàå i äëÿ ïðûíòýðó\n"
-#~ "NetWare, òîëüêi íå ïàòðàáóåööà iíôàðìàöûÿ àá ïðàöîóíàé ãðóïå."
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Íÿìåöêi (1TR6)"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Äàéöå iìÿ (íàïð.: `extra', `commercial')"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr ""
-#~ "Áóäçå ¢ñòàëÿâàíà %d Má. Ìîæíà àáðàöü áîëüø ïðàãðàìࢠäëÿ ¢ñòàëÿâàííÿ."
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Áóäçåì âûäàëÿöü ïóíêò %s"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO çìÿø÷àå íàñòóïíûÿ ïóíêòû.\n"
-#~ "Âû ìîæàöå äàäàöü ÿø÷ý, àëüáî çìÿíiöü iñíóþ÷ûÿ."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ìîæíà ïàñïðàáàâàöü çíàéñöi äàñòóïíûÿ ïàìåðû ýêðàíó (íàïð.: 800x600).\n"
-#~ "Ó âåëüìi ðýäêiì âûïàäêó ãýòà ìîæà ïðûâåñöi äà ñïûíåííÿ êàìï'þòàðó .\n"
-#~ "Æàäàåöå ïàñïðàáàâàöü?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Çíàéøëi ISDN êàðòó:\n"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Íåàáõîäíà àäêàíôiãóðàâàöü âàøó ñåòêàâóþ êàðòó, êàá ìàã÷ûìà áûëî äàëó÷ûööà "
-#~ "äà Iíòýðíýòó."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Êàëi DrakX ïðàâiëüíà çíàéøî¢ âàøó ìûø, ïðîñòà âûáÿðûöå ç ìåíþ\n"
-#~ "iíøû ïóíêò. Ó ïðîöiëåãëûì âûïàäêó àáÿðûöå ïàäûõîäçÿ÷û âàðûÿíò\n"
-#~ "äðàéâåðó ìûøû ñà ñïiñó âûøýé.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ó âûïàäêó ìûøû, ÿêàÿ äàëó÷àíà äà ïàñëÿäî¢íàãà ïîðòó, âàì ïàòðàáóåööà "
-#~ "ïàâåäàìiöü\n"
-#~ "DrakX ïðàâiëüíû íóìàð ïàñëÿäî¢íàãà ïîðòó, äà ÿêîãà ÿíà äàëó÷àíà."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Êàëi âàø ADSL ìàäýì àäíà ç ìàäýëÿ¢ Alcatel, ïàçíà÷öå Alcatel. Ó iíøûì "
-#~ "âûïàäêó - ECI."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "ßêàÿ êðàiíà âàøàãà ðàçìÿø÷ýííÿ?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Óñòàëÿâàííå/Âûðàòàâàííå"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Óñòàëÿâàííå SILO íå àòðûìàëàñÿ. Óçíiêëà íàñòóïíàÿ ïàìûëêà:"
-
-#~ msgid "Installed packages"
-#~ msgstr "Óñòàëÿâàíûÿ ïàêåòû"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Íåàáõîäíà ïåðàçàïóñöiöü óñòàëÿâàííå i çàãðóçiööà ç äûñêåòû"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Íåàáõîäíà ïåðàçàïóñöiöü óñòàëÿâàííå ç íîâûìi ïàðàìåòðàìi"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Íàñòîéëiâà ðýêàìåíäóåì àäêàçàöü òóò \"Òàê\"! Âîñü íàïðûêëàä, êàëi âû\n"
-#~ "ïåðà¢ñòàëþåöå Windows, ÿíà ïåðàçàïiøà çàãðóçà÷íû ñåêòàð.\n"
-#~ "Êàëi âû íå ñòâàðûëi çàãðóçà÷íû äûñê, âû áîëüø íå çäîëååöå çàãðóçiöü\n"
-#~ "Linux!"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) ìîæà çàãðóæàöü Linux i iíøûÿ àïåðàöûéíûÿ ñiñòýìû.\n"
-#~ "Çâû÷àéíà ÿíû êàðýêòíà çíàõîäçÿööà ïðû ¢ñòàëÿâàíí³. Êàëi âû íå ¢áà÷ûëi\n"
-#~ "òûõ ñiñòýì, ÿêiÿ áûëi ¢ñòàëÿâàíû íà ìàøûíå, âû ìîæàöå äàäàöü çàðàç\n"
-#~ "àäíó ç iõ àëüáî íåêàëüêi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âû íå æàäàåöå, êàá óñå ìåëi äîñòóï äà àäíîé ç iõ, âûäàëiöå ÿå çàðàç\n"
-#~ "(äçåëÿ ÿå çàãðóçêi ïàòðàáóåööà çàãðóçà÷íû äûñê)."
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Ëiíåéíà (íåàáõîäíà äëÿ íåêàòîðûõ àäàïòýðࢠSCSI)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66 HPT.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "Linux ïàêóëü ÿø÷ý íå öàëêàì ïàäòðûìëiâàå ultra dma 66 HPT.\n"
-#~ "ßê âàðûÿíò, ìàãó ñòâàðûöü äûñêåòó, ÿêàÿ çàáÿñïå÷ûöü äîñòóï äà äûñêó íà "
-#~ "ide2 i ide3"
-
-#~ msgid "Local LAN"
-#~ msgstr "Ëàêàëüíàÿ ñåòêà"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Ëàêàëüíû ïðûíòýð (URI)"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Íàñòðîéêi ëàêàëüíàé ñåòêi óæî çàäàäçåíû.\n"
-#~ "Öi æàäàåöå Âû:"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A àëüáî âûøåé (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft ñóìÿñöiìàÿ (ïàñëÿäî¢íàÿ)"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Ïàâåðí³öå êîëà ìûøû"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "cdrom íåäàñòóïíû (íi÷îãà íÿìà ¢ /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Íå çíîéäçåíà"
-
-#~ msgid "No more match"
-#~ msgstr "Áîëüø íå çíîéäçåíà"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Ïàäûõîäçÿ÷ûÿ ðýæûìû íå çíîéäçåíû.\n"
-#~ "Ïàñïðàáóéöå âûáðàöü iíøóþ âiäýàêàðòó öi ìàíiòîð"
-
-#~ msgid "Other countries"
-#~ msgstr "Iíøûÿ êðàiíû"
-
-#~ msgid "Package"
-#~ msgstr "Ïàêåò"
-
-#~ msgid "Password:"
-#~ msgstr "Ïàðîëü:"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "ßêi ðàçäçåë äûñêà æàäàåöå âûêàðûñòî¢âàöü ó ÿêàñöi êàðàí¸âàãà?"
-
-#~ msgid ""
-#~ "Please choose which network adaptater do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "Êàëi ëàñêà, ïàçíà÷öå ñåòêàâû àäàïòàð, ÿêi âû áóäçåöå âûêàðûñòî¢âàöü äçåëÿ "
-#~ "äàëó÷ýííÿ äà Iíòýðíýòó.\n"
-#~ "Êàëi íå âåäàåöå, ïàçíà÷öå eth0.\n"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Ïðàäñòà¢öå íàñòóïíóþ iíôàðìàöûþ"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Ïåðàêàíôiãóðàâàöü ëàêàëüíóþ ñåòêó"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Rescue"
-#~ msgstr "Âûðàòàâàííå"
-
-#~ msgid "SILO main options"
-#~ msgstr "Ãàëî¢íûÿ îïöûi SILO"
-
-#~ msgid "Sciences"
-#~ msgstr "Íàâóêîâàå"
-
-#~ msgid "Search"
-#~ msgstr "Ïîøóê"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Ïîøóê êàðàí¸âàãà ðàäçåëà."
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Àáÿðûöå ïàæàäàíû ïàìåð óñòàëÿâàííÿ"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Àáÿðûöå:\n"
-#~ "\n"
-#~ "  - Ðýêàìåíäóåööà: Êàëi âû ðàíåé íiêîëi íå ¢ñòà븢âàëi Linux.\n"
-#~ "\n"
-#~ "  - Ïà âûáàðó: Êàëi âû çíà¸ìûÿ ç Linux, òî ìîæíà àáðàöü íàñòóïíûÿ \n"
-#~ "ñïîñàáû âûêàðûñòàííÿ ñiñòýìû: íàðìàëüíû, äëÿ ðàñïðàöî¢ø÷ûêà, àëüáî\n"
-#~ "ñåðâåð. Àáÿðûöå \"Çâû÷àéíû\" äëÿ ¢ñòàëÿâàííÿ ñiñòýìû àãóëüíàãà "
-#~ "ïðûçíà÷ýííÿ.\n"
-#~ "Ðýæûì \"Äëÿ ðàñïðàöî¢êi\" ïðûçíà÷àíû äëÿ òûõ, õòî âûêàðûñòî¢âàå "
-#~ "êàìï'þòýð\n"
-#~ "ìåíàâiòà äëÿ ðàñïðàöî¢êi ïðàãðàìà¢. Êàëi âû æàäàåöå ¢ñòàëÿâàöü ñåðâåð "
-#~ "àãóëüíàãà\n"
-#~ "ïðûçíà÷ýííÿ (äëÿ ïîøòû, äðóêó, ...), òàäû àáÿðûöå \"Ñåðâåð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ýêñïåðò: Êàëi âû ñâàáîäíà âàëîäàåöå GNU/Linux i æàäàåöå ïðàâåñöi\n"
-#~ "¢ñòàëÿâàííå ç ïàãëûáëåííàé íàñòðîéêàé, ãýòû Êëàñ Óñòàëÿâàííÿ - äëÿ âàñ.\n"
-#~ "Âû òàêñàìà çìîæàöå àáðàöü ïðûçíà÷ýííå ñiñòýìû, ÿê ó âàðûÿíöå  \"Ïà âûáàðó"
-#~ "\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Íàñòðîéêà SCSI"
-
-#~ msgid "Show less"
-#~ msgstr "Ïàêàçàöü ìåíåé"
-
-#~ msgid "Show more"
-#~ msgstr "Ïàêàçàöü áîëåé"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Ïàêàçàöü óñå ëiñòû"
-
-#~ msgid "Shutting down"
-#~ msgstr "Âûêëþ÷ýííå êàìï'þòýðó"
-
-#~ msgid "Size: %d MB"
-#~ msgstr "Ïàìåð: %d MB"
-
-#~ msgid "Size: %d MB\n"
-#~ msgstr "Ïàìåð: %d MB\n"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Ïàìåð: %s Má"
-
-#~ msgid "Slovakian"
-#~ msgstr "Ñëàâàöêi"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "Ìàëû (%dMá)"
-
-#~ msgid "Socket"
-#~ msgstr "Ñîêåò"
-
-#~ msgid "Sort by"
-#~ msgstr "Óïàðàäêàâàöü ïà"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Âûêàðûñòî¢âàöü óñþ äûñêàâóþ ïðàñòîðó"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Íàñòóïíûÿ ïàêåòû áóäóöü âûäàëåíû ç ñiñòýìû"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Çàðàç ïà÷íåööà ¢ñòàëÿâàíüíÿ àáðàíûõ ïàêåòà¢. Ãýòàÿ àïåðàöûÿ àäûìå\n"
-#~ "íåêàëüêi õâiëiíࢠ÷àñó, êàëi âû íå àáðàëi àáíà¢ëåííå iñíóþ÷àé ñiñòýìû,\n"
-#~ "áî ó àïîøíiì âûïàäêó øìàò ÷àñó ïàòðàáóåööà ÿø÷ý äà ïà÷àòêó àáíà¢ëåííÿ\n"
-#~ "êàá ïðààíàëiçàâàöü ñiñòýìó."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Ãýòàÿ ìåòêà ¢æî âûêàðûñòî¢âàåööà"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ãýòû ðàçäçåë ïðûñâå÷àíû íàñòðîéöû ëàêàëüíàé ñåòêi,\n"
-#~ "(LAN), àëüáî ìàäýìà. \n"
-#~ "\n"
-#~ "Àáÿðûöå \"Ëàêàëüíàÿ ñåòêà\" i DrakX ïàñïðàáóå çíàéöi\n"
-#~ "íà âàøàé ìàøûíå àäàïòýð Ethernet. Àäàïòýðû PCI ïàâiííû áûöü çíîéäçåíû\n"
-#~ "i íàñòðîåíû à¢òàìàòû÷íà. Àäíàê, ïðû ñêàðûñòàííi ISA,\n"
-#~ "à¢òàçíàõîäæàííå íå ïðàöóå, i âàì ïðûéäçåööà âûáiðàöü äðàéâåð\n"
-#~ "ñà ñïiñó, ÿêi ç'ÿâiööà ïåðàä âà÷ûìà ¢ ãýòûì âûïàäêó.\n"
-#~ "\n"
-#~ "\n"
-#~ "ßê i äëÿ àäàïòýðࢠSCSI, âû ìîæàöå äàçâîëiöü äðàéâåðó ïðàâåðûöü\n"
-#~ "ïðûëàäó ñàìàñòîéíà, iíàêø ïðûéäçåööà çàäàâàöü äðàéâåðó íàñòðîéêi,\n"
-#~ "ÿêiÿ âû çíîéäçåööå ¢ äàêóìåíòàöûi ïà âàøàìó àáñòàëÿâàííþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïðû ¢ñòàëÿâàíí³ Mandrake Linux íà êàìï'þòýð, ÿêi ïðàöóå âà ¢æî\n"
-#~ "íàëàäæàíàé ñåòöû, àäìiíiñòðàòàðó ñåòêi ïðûéäçåööà ïàâåäàìiöü\n"
-#~ "âàì óñþ íåàáõîäíóþ iíôàðìàöûþ (IP àäðàñ, ìàñêà ïàäñåòêi\n"
-#~ "öi ñêàðî÷àíà ïàäìàñêà, i iìÿ õàñòà). Êàëi âû ñòâàðàåöå\n"
-#~ "ïðûâàòíóþ ñåòêó, íàïðûêëàä äîìà, âû ïàâiííû âûáðàöü\n"
-#~ "óñå íàñòðîéêi ñàìàñòîéíà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àáÿðûöå \"Çëó÷ýííå ïðàç ìàäýì\" äëÿ íàñòðîéêi çëó÷ýííÿ\n"
-#~ "ç ñóñâåòíàé ãëàáàëüíàé ñåòêàé Internet ïðàç ìàäýì. DrakX ïàñïðàáóå\n"
-#~ "çíàéñöi âàø ìàäýì, àëå êàëi ¢ ÿãî ãýòà íå àòðûìàåööà, âàì áóäçå\n"
-#~ "ïàòðýáíà ñàìàñòîéíà ïàçíà÷ûöü ñåðûéíû ïîðò, äà ÿêîãà äàëó÷àíû ìàäýì."
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "×àñ (ñÿê) íåàêòû¢íàñöi, ïàñëÿ ÿêîãà\n"
-#~ "âåøàöü ñëóõà¢êó. (Ïàêiíüöå ïóñòîå, êàá àäìÿíiöü)"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Äëÿ ïîøóêó ïàäûõîäçÿ÷ûõ ïàìåðࢠýêðàíó çàðàç ïàñïðàáóåì ðîçíûÿ ðýæûìû. \n"
-#~ "Âàø ýêðàí áóäçå ìiãàöü... Êàëi âàì íå ïàäàáàåööà ìiãàííå, ÿãî ìîæíà \n"
-#~ "àäêëþ÷ûöü, òàäû ïàñëÿ çàêàí÷ýííÿ áóäçå ÷óâàöü ãóäîê."
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Ïåðàêëþ÷ûöü Óñòàëÿâàíà/Äàñòóïíà"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Âûáðàíà çàøìàò ïàêåòà¢: %dMá íå ¢ëàçiöü ó %dMá"
-
-#~ msgid "Tree"
-#~ msgstr "Äðýâà"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Ïàñïðàáàâàöü çíàéñöi %s ïðûëàäû?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Ïàñïðàáàâàöü çíàéñöi PCI ïðûëàäû?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Ïàñïðàáàâàöü çíàéñöi êàðòû PCMCIA?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Ïàñïðàáàâàöü çíàéñöi ìàäýì?"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI äëÿ ëàêàëüíàãà ïðûíòýðó"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL êàòàëîãà, ÿêi çìÿø÷àå RPM"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Ìûø (3 êíîïêi öi áîëåé)"
-
-#~ msgid "Update location"
-#~ msgstr "Çìÿíiöü êðûíiöó"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Àäíà¢ëåííå áàçû ïàêåòࢠRPM"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Âûêàðûñòî¢âàöü ïàðîëi MD5"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Âûêàðûñòî¢âàöü DiskDrake"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Âûêàðûñòî¢âàöü öåíÿâû ôàéë"
-
-#~ msgid "User name:"
-#~ msgstr "Iìÿ êàðûñòàëüíiêó:"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "Äà ÿêîãà ïîðòó äàëó÷àíû âàø ïðûíòýð \n"
-#~ "(/dev/lp0 ýêâiâàëåíòíû LPT1:)?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Øòî âû æàäàåöå çíàéñö³?"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Øòî âû õî÷àöå çðàáiöü?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "ßêi òûï âàøàé ìûøû?"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "ßêi òûï âàøàé êëàâiÿòóðû?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Äçåëÿ ÷àãî Âû áóäçåöå âûêàðûñòî¢âàöü ñ³ñòýìó?"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "ßêîå âûêàðûñòàííå àáiðàåöå?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "ßêi ïà÷àòêîâû çàãðóç÷ûê âû æàäàåöå âûêàðûñòî¢âàöü?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "ßêi ôàéë âû øóêàåöå?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "ßêiÿ ïàêåòû øóêàåì"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "ßêi òûï ðàçäçåëó âàì ïàòðýáíû?"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Äà ÿêîãà ïîñëÿäî¢íàãà ïîðòó äàëó÷àíà âàøà ìûø?"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Ó âàñ íå õàïàå ìåñöà äëÿ Lnx4win"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Âû íå ìàåöå àíiÿêiõ Windows ðàçäçåëà¢!"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Çàðàç ìîæíà àáðàöü ïàêåòû ïðàãðàì, ÿêiÿ âû æàäàåöå ¢ñòàëÿâàöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïà-ïåðøàå, âû ìîæàöå àáðàöü ãðóïó ïàêåòࢠêàá óñòàëÿâàöü öi àáíàâiöü. "
-#~ "Ïàñëÿ\n"
-#~ "âû ìîæàöå àäçíà÷ûöü áîëüø ïàêåòࢠó àäïàâåäíàñöi ç ÿãóëüíûì ïàìåðàì, ÿêi\n"
-#~ "âû æàäàåöå àáðàöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êàëi âû ïðàöóåöå ¢ ðýæûìå ýêñïåðòó, òàäû ïàêåòû ìîæíà àáiðàöü "
-#~ "iíäûâiäóàëüíà.\n"
-#~ "Ìàéöå íà ¢âàçå, øòî íåêàòîðûÿ ïàêåòû ïàòðàáóþöü óñòàëÿâàííÿ iíøûõ "
-#~ "ïàêåòà¢.\n"
-#~ "Ãýòà çàâåööà çàëåæíàñööþ ïàêåòà¢. Ïàêåòû, ÿêiÿ âû àáðàëi, i ïàêåòû,\n"
-#~ "àä ÿêiõ ÿíû çàëåæàöü, áóäóöü à¢òàìàòû÷íà àáðàíû äçåëÿ ¢ñòàëÿâàííÿ.\n"
-#~ "Íåìàã÷ûìà ¢ñòàëÿâàöü ïàêåò äà ¢ñòàëÿâàííÿ ¢ñiõ ïàêåòà¢, àä ÿêiõ ¸í "
-#~ "çàëåæûöü."
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Âàø êàêìï'þòýð ìîæà áûöü ñêàíôiãóðàâàíû äà ñóìåñíàãà Iíòýðíýò-çëó÷ýííÿ.\n"
-
-#~ msgid "automagic"
-#~ msgstr "à¢òàìàãi÷íû"
-
-#~ msgid "beginner"
-#~ msgstr "ïà÷ûíàþ÷û"
-
-#~ msgid "brunette"
-#~ msgstr "áðóíåò"
-
-#~ msgid "changing type of"
-#~ msgstr "Çìÿíåííå òûïó"
-
-#~ msgid "default"
-#~ msgstr "Ïà äàìà¢ëåííþ"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "íå âûêàðûñòî¢âàöü pppoe"
-
-#~ msgid "girl"
-#~ msgstr "äçÿ¢÷ûíà"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (âàæíà)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (äîáðà)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (âåëüìi äîáðà)"
-
-#~ msgid "linear"
-#~ msgstr "Ëiíåéíà"
-
-#~ msgid "loopback"
-#~ msgstr "Âiðòóàëüíàÿ ôàéëàâàÿ ñiñòýìà (loopback)"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ïàìûëêà ìàíöiðàâàííÿ nfs"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake çàðàç ó ðýæûìå ``low memory''.\n"
-#~ "rpmdrake áóäçå ïåðàçàïóø÷àíû äçåëÿ çàáåñïÿ÷ýííÿ ïîøóêó ôàéëà¢"
-
-#~ msgid "tie"
-#~ msgstr "ãàëüøòóê"
-
-#~ msgid "woman-blond"
-#~ msgstr "æàí÷ûíà-áëàíäûíêà"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
deleted file mode 100644
index 7bea7e548..000000000
--- a/perl-install/share/po/bg.po
+++ /dev/null
@@ -1,13898 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999, 2000 MandrakeSoft
-# Elena Radeva <ely@triada.bg>, 1999.
-# Pavel Cholakov <pavel@linux.home.bg>, 1999.
-# Boyan Ivanov <boyan17@bulgaria.com>, 1999, 2000
-# Bozhan Boiadzhiev <bozhan@plov.omega.bg>, 2000
-# Valery Dachev <valery@zonebg.com>, 2000, 2001
-#
-# Bulgarians on Linux use windows-1251 encoding
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-08-15 15:29+0200\n"
-"Last-Translator: Valery Dachev <valery@zonebg.com>\n"
-"Language-Team: Bulgarian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=windows-1251\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Èçïîëçâàé ðàçøèðåíèåòî Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Íàñòðîéêà ñàìî íà êàðòà \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Ãðàôè÷íà êàðòà"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Èçáåðåòå ãðàôè÷íà êàðòà"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Èçáåðåòå X ñúðâúð"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ñúðâúð"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Èçáåðåòå X ñúðâúð"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ñúðâúð"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Êîÿ íàñòðîéêà íà XFree èñêàòå äà èìàòå ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Êàðòàòà âè ìîæå äà èìà ïîääðúæêà íà õàðäóåðíî 3D óñêîðåíèå, íî ñàìî ñ Xfree %"
-"s.\n"
-"Êàðòàòà âè ñå ïîääúðæà îò XFree %s, êîéòî ìîæå äà èìà ïî-äîáðà ïîääðúæêà íà "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Êàðòàòà âè ìîæå äà èìà ïîääðúæêà íà õàðäóåðíî 3D óñêîðåíèå â XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ñ õàðäóåðíî 3D óñêîðåíèå"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Êàðòàòà âè ìîæå äà èìà ïîääðúæêà íà õàðäóåðíî 3D óñêîðåíèå ñ XFree %s.\n"
-"ÎÒÁÅËÅÆÅÒÅ, ×Å ÒÎÂÀ Å ÅÊÑÏÅÐÈÌÅÍÒÀËÍÀ ÏÎÄÄÐÚÆÊÀ È ÊÎÌÏÞÒÚÐÚÒ ÂÈ ÌÎÆÅ ÄÀ "
-"ÇÀÁÈÅ."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ñ ÅÊÑÏÅÐÈÌÅÍÒÀËÍO õàðäóåðíî 3D óñêîðåíèå"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Êàðòàòà âè ìîæå äà èìà ïîääðúæêà íà õàðäóåðíî 3D óñêîðåíèå, íî ñàìî ñ XFree %"
-"s,\n"
-"ÎÒÁÅËÅÆÅÒÅ, ×Å ÒÎÂÀ Å ÅÊÑÏÅÐÈÌÅÍÒÀËÍÀ ÏÎÄÄÐÚÆÊÀ È ÌÎÆÅ ÄÀ ÇÀÁÈÅ ÊÎÌÏÞÒÚÐÀ "
-"ÂÈ.\n"
-"Êàðòàòà âè ñå ïîääúðæà îò XFree %s, êîéòî ìîæå äà èìà ïî-äîáðà ïîääðúæêà íà "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (èíñòàëàöèÿ ãðàôè÷åí äðàéâåð)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Íàñòðîéêà íà XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Èçáåðåòå êàïàöèòåò íà ïàìåòòà íà ãðàôè÷íàòà ñè êàðòà"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Èçáåðåòå îïöèè çà ñúðâúðà"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Èçáåðåòå ìîíèòîð"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ìîíèòîð"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Äâàòà êðèòè÷íè ïàðàìåòúðà ñà âåðòèêàëíàòà ñêîðîñò íà âúçñòàíîâÿâàíå, êîÿòî "
-"îòðàçÿâà ñêîðîñòòà, \n"
-"ñ êîÿòî öåëèÿò åêðàí ñå âúçñòàíîâÿâà, è íàé-âàæíîòî - õîðèçîíòàëíàòà\n"
-"ñèíõðîíèçàöèîííà ñêîðîñò, êîÿòî îòðàçÿâà ñêîðîñòòà, ñ êîÿòî ñå èçïèñâàò "
-"õîðèçîíòàëíèòå ëèíèè.\n"
-"\n"
-"ÌÍÎÃÎ Å ÂÀÆÍÎ äà èçáåðåòå òàêàâà ñèíõðîíèçàöèîííàòà ñêîðîñò, êîÿòî äà "
-"îòãîâàðÿ íà âúçìîæíîñòèòå íà Âàøèÿ ìîíèòîð - â ïðîòèâåí ñëó÷àé ìîæåòå äà "
-"ïîâðåäèòå ìîíèòîðà ñè.\n"
-" Àêî èìàòå íÿêàêâè ñúìíåíèÿ, èçáåðåòå êîíñåðâàòèâíà íàñòðîéêà."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Õîðèçîíòàëíà ñêîðîñò íà âúçñòàíîâÿâàíå"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Âåðòèêàëíà ñêîðîñò íà âúçñòàíîâÿâàíå"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ìîíèòîðúò íå å íàñòðîåí"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ãðàôè÷íàòà êàðòà âñå îùå íå å íàñòðîåíà"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Îùå íå å èçáðàíà ðàçäåëèòåëíà ñïîñîáíîñò"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Èñêàòå ëè äà òåñòâàòå íàñòðîéêèòå?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Âíèìàíèå: òåñòâàíåòî íà òàçè ãðàôè÷íà êàðòà ìîæå äà \"çàìðàçè\" êîìïþòúðà âè"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Ïðîâåðêà íà íàñòðîéêàòà"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"îïèòàéòå ñå äà ïðîìåíèòå íÿêîè ïàðàìåòðè"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ïîÿâè ñå ãðåøêà:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Èçõîä äî %d ñåêóíäè"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Âåðíè ëè ñà íàñòðîéêèòå ?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ïîÿâè ñå ãðåøêà, îïèòàéòå ñå äà ïðîìåíèòå íÿêîè ïàðàìåòðè"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Ðàçäåëèòåëíà ñïîñîáíîñò"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Èçáåðåòå ðàçäåëèòåëíà ñïîñîáíîñò è äúëáî÷èíà íà öâåòîâåòå"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ãðàôè÷íà êàðòà: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ñúðâúð: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Îùå"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Åêñïåðòåí ðåæèì"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ïîêàæè âñè÷êè"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Ðàçäåëèòåëíà ñïîñîáíîñò"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Òèï êëàâèàòóðà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Òèï ìèøêà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Óñòðîéñòâî íà ìèøêàòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ìîíèòîð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Õîðèçîíòàëíà ñèíõðîíèçàöèÿ íà ìîíèòîðà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Âåðòèêàëíî îïðåñíÿâàíå íà ìîíèòîðà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ãðàôè÷íà êàðòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Èäåíòèôèêàöèÿ íà ãðàôè÷íàòà êàðòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ãðàôè÷íà ïàìåò: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Äúëáî÷èíà íà öâåòà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Ðàçäåëèòåëíà ñïîñîáíîñò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ñúðâúð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 äðàéâåð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ïîäãîòîâêà çà íàñòðîéâàíå íà X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Êàêâî èñêàòå äà íàïðàâèòå?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Ïðîìåíåòå ìîíèòîðà"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ïðîìåíåòå ãðàôè÷íàòà êàðòà"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Ïðîìåíåòå îïöèèòå íà ñúðâúðà"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Ïðîìåíåòå ðàçäåëèòåëíàòà ñïîñîáíîñò"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Ïîêàæè èíôîðìàöèÿòà"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Òåñòâàé îòíîâî"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Èçëèçàíå"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Äà çàïàçÿ ëè ïðîìåíèòå ?\n"
-"Òåêóùàòà íàñòðîéêà å:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ïðè ñòàðòèðàíå íà ñèñòåìàòà"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Kîìïþòúðà âè ìîæå àâòîìàòè÷íî, äà âëåçå â X ïðè ñòàðòèðàíå.\n"
-"Èñêàòå ëè X äà ñå ñòàðòèðà, êîãàòî ðåñòàðòèðàòå ñèñòåìàòà?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ìîëÿ âëåçòå îòíîâî â %s, çà äà àêòèâèðàòå ïðîìåíèòå"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Ìîëÿ èçëåçòå îò ñåñèÿòà è èçïîëçâàéòå Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 öâÿòà (8 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 õèëÿäè öâÿòà (15 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 õèëÿäè öâÿòà (16 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ìèëèîíà öâÿòà (24 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ìèëèàðäà öâÿòà (32 áèòà)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ÊÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ÊÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 ÌÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 ÌÁ èëè ïîâå÷å"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 íà 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 íà 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-ñúâìåñòèì, 1024x768 íà 87 Hz interlaced (íÿìà 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 íà 87 Hz interlaced, 800x600 íà 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 íà 60 Hz, 640x480 íà 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 íà 60 Hz, 800x600 íà 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Âèñîêî÷åñòîòåí SVGA, 1024x768 íà 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Ìíîãî÷åñòîòåí ìîíèòîð, êîéòî äîñòèãà 1280x1024 íà 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Ìíîãî÷åñòîòåí ìîíèòîð, êîéòî äîñòèãà 1280x1024 íà 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Ìíîãî÷åñòîòåí ìîíèòîð, êîéòî äîñòèãà 1280x1024 íà 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ìîíèòîð, êîéòî äîñòèãà 1600x1200 íà 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ìîíèòîð, êîéòî äîñòèãà 1600x1200 íà 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Ïúðâè ñåêòîð îò ñòàðòèðàùèÿ ñå äÿë"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ïúðâèÿò ñåêòîð îò äðàéâà (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO èíñòàëàöèÿ"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Êúäå èñêàòå äà èíñòàëèðàòå bootloader-à?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub èíñòàëàöèÿ"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO ñ òåêñòîâî ìåíþ"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO ñ ãðàôè÷íî ìåíþ"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Ñòàðòèðàíå îò DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Îïöèè íà çàðåæäàùàòà ïðîãðàìà"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Èçïîëçâàíà çàðåæäàùàòà ïðîãðàìà"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader èíñòàëàöèÿ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Ñòàðòèðàùî óñòðîéñòâî"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (íå ðàáîòè íà ñòàðè BIOS-è)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Êîìïàêòåí"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "êîìïàêòåí"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Âèäåî ðåæèì"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Çàáàâÿíå ïðåäè ñòàðòèðàíåòî íà default äÿëà"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Ïàðîëà"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Ïàðîëà (îòíîâî)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Îãðàíè÷è îïöèèòå, çàäàâàíè îò êîìàíäíèÿ ðåä"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "îãðàíè÷è"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Ïî÷èñòâàíå íà /tmp ïðè âñÿêî çàðåæäàíå"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Òî÷åí ðàçìåð íà RAM-ïàìåòòà, àêî å íåîáõîäèìî (íàìåðåíè %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Âêëþ÷è ìíîãî ïðîôèëè"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Äàéòå ðàçìåðà RAM-ïàìåò â Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Îïöèÿòà ``Îãðàíè÷è îïöèèòå îò êîìàíäíèÿ ðåä'' å áåçïîëåçíà áåç ïàðîëà"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Ìîëÿ, îïèòàéòå îòíîâî"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ïàðîëèòå íà ñúâïàäàò"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Ñòàðòîâî ñúîáùåíèå"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Èç÷àêâàíå íà Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Èç÷àêâàíå çà ñòàðòèðàíå íà ÿäðîòî"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Ñòàðòèðàíå îò CD ?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Ñòàðòèðàíå îò OF ?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "ÎÑ ïî ïîäðàçáèðàíå ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Òîâà ñà ðàçëè÷íèòå çàïèñè.\n"
-"Ìîæåòå äà äîáàâèòå îùå èëè äà ïðîìåíèòå ñúùåñòâóâàùèòå."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Äîáàâè"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Ãîòîâî"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ìîäèôèöèðàé"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Êàêúâ òèï èíôîðìàöèÿ èñêàòå äà ïðèáàâèòå"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Äðóãà ÎÑ (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Äðóãà ÎÑ (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Äðóãà ÎÑ (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Îáðàç"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Ãëàâåí"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Äîïúëâàíå"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "×åòåíå-çàïèñ"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Òàáëèöà"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Îïàñåí"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Åòèêåò"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Ïî ïîäðàçáèðàíå"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-ãîëåìèíà"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Áåç ãðàôèêà"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ïðåìàõíè çàïèñ"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Ïðàçåí åòèêåò íå å ðàçðåøåí"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Òðÿáâà äà èìàòå swap-äÿë"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Òîçè åòèêåò âå÷å ñå èçïîëçâà"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Íàìåðåíè ñà %s %s èíòåðôåéñè"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Èìàòå ëè äðóã(è) ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Èìàòå ëè íÿêàêúâ %s èíòåðôåéñ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Íå"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Äà"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Âèæ õàðäóåðíàòà èíôîðìàöèÿ"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Èíñòàëèðàíå íà äðàéâåð çà %s ïëàòêà %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(ìîäóë %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Êîé %s äðàéâåð äà ïðîáâàì ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-" íÿêîè ñëó÷àè, %s äðàéâåðúò ñå íóæäàå îò äîïúëíèòåëíà èíôîðìàöèÿ, çà\n"
-"äà ðàáîòè êîðåêòíî, âúïðåêè ÷å íîðìàëíî ðàáîòè è áåç íåÿ. Æåëàåòå ëè "
-"äàïîäàäåòå\n"
-"äîïúëíèòåëíè îïöèè çà íåãî èëè äà ðàçðåøèòå íà äðàéâåðà äà ïîòúðñè "
-"èíôîðìàöèÿòà\n"
-"îò êîÿòî ñå íóæäàå ? Ïî ïðèíöèï òîâà ìîæå äà çàáèå êîìïþòúðà âè, íî íÿìà äà "
-"ãî ïîâðåäè."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Àâòîìàòè÷íî çàñè÷àíå"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Çàäàé îïöèè"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ñåãà ìîæåòå äà ïîäàäåòå îïöèèòå ìó äî ìîäóëà %s.\n"
-"Îïöèèòå ñà âúâ ôîðìàò ``èìå=ñòîéíîñò èìå2=ñòîéíîñò2 ...''.\n"
-"Íàïðèìåð: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Îïöèè íà ìîäóëà:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Çàðåæäàíåòî íà ìîäóëà %s íå óñïÿ.\n"
-"Èñêàòå ëè äà îïèòàòå îòíîâî ñ äðóãè ïàðàìåòðè ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(âå÷å ïðèáàâèõ %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Òàçè ïàðîëà å ïðåêàëåíî ïðîñòà"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Ìîëÿ, çàäàéòå ïîòðåáèòåëñêî èìå"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Ïîòðåáèòåëñêîòî èìå ìîæå äà âêëþ÷âà ñàìî ìàëêè áóêâè, íîìåðà, `-' è `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Òîâà ïîòðåáèòåëñêî èìå å âå÷å äîáàâåíî"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Äîáàâè ïîòðåáèòåë"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Âúâåäåòå ïîòðåáèòåë\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Ïðèåìè ïîòðåáèòåë"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Èñòèíñêî èìå"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Ïîòðåáèòåëñêî èìå"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Øåë"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Èêîíà"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ìîãà äà íàñòðîÿ êîìïþòúðà âè äà âëèçàíå â ñèñòåìàòà àâòîìàòè÷íî êàòî íÿêîé "
-"ïîòðåáèòåë.\n"
-"Èñêàòå ëè òàçè âúçìîæíîñò ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Èçáåðåòå ïîäðàçáèðàù ñå ïîòðåáèòåë :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Èçáåðåòå Windows Manager çà ñòàðòèðàíå:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Ìîëÿ, èçáåðåòå èçïîëçâàí åçèê."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Ìîæåòå äà èçáåðåòå äðóãè åçèöè, êîèòî ùå áúäàò íàëèöå ñëåäèíñòàëàöèÿòà"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Âñè÷êè"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Äîáàâÿíå íà ïîòðåáèòåë"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Êëèåíòñêà"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Ïîäåëÿíå íà ôàéëîâå"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Òîçè ïàêåò òðÿáâà äà áúäå îáíîâåí\n"
-"Ñèãóðíè ëè ñòå, ÷å èñêàòå äà ãî èçêëþ÷èòå ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Îòìÿíà"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Äîáðå äîøëè ïðè Cracker-èòå"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Ëîøî"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ñòàíäàðòíà"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Âèñîêî"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Âèñîêî"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Ïàðàíîè÷íî"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Òîâà íèâî ñå èçïîëçâà ñ âíèìàíèå. Òîâà êàðà ñèñòåìàòà âè ïî-ëåñíà çà\n"
-"óïîòðåáà, íî å ïî-÷óâñòâèòåëíî: íå òðÿáâà äà áúäå èçïîëçâàíà íà ìàøèíè\n"
-"ñâúðçàíè ñ äðóãè èëè ïî Èíòåðíåò. Íÿìà äîñòúï ñ ïàðîëè."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ïàðîëàòà ñåãà å âêëþ÷åíà, íî èçïîëçâàíåòî êàòî ìðåæîâ êîìïþòúð íå å "
-"ïðåïîðú÷èòåëíî."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Òîâà å ñòàíäàðòíàòà ñèãóðíîñò ïðåïîðú÷èòåëíà çà êîìïþòúð, êîéòî ùå áúäå\n"
-"èçïîëçâàí äà ñå ñâúðçâà êúì Èíòåðíåò êàòî êëèåíò. Èìà ïðîâåðêè íà "
-"ñèãóðíîñòòà. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ñ òîâà íèâî íà ñèãóðíîñò, ïîëçâàíåòî íà ñèñòåìàòà êàòî ñúðâúð ñòàâà "
-"âúçìîæíî.\n"
-"Ñèãóðíîñòòà ñåãà å äîñòàòú÷íî ãîëÿìà äà ñå èçïîëçâà ñèñòåìàòà êàòî\n"
-"ñúðâúð ïðèåìàù âðúçêè îò ìíîãî êëèåíòè. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Èçáèðàìå 4-òî íèâî, íî ñèñòåìàòà å íàïúëíî çàòâîðåíà.\n"
-"Íèâîòî íà ñèãóðíîñò å íà ìàêñèìóìà ñè."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Èçáåðåòå íèâî íà ñèãóðíîñò"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Íèâî íà ñèãóðíîñò"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Èçïîëçâàéòå libsafe çà ñúðâúðè"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Áèáëèîòåêà, êîÿòî îñèãóðÿâà çàùèòà îò aòàêè ñ ïðåïúëâàíå íà áóôåð è ôîðìàòíè "
-"ñòðèíãîâå."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "íÿìà äîñòàòú÷íî ìÿñòî çà /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Äåñêòîï"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Ñòàðòîâî Ìåíþ"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Íå ìîæåòå äà èíñòàëèðàòå bootloader íà äÿëà %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "íÿìà âúâåäåíà ïîìîù îùå.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Íàñòðîéêà íà íà÷èíà íà ñòàðòèðàíå"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ôàéëîâå"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ôàéë/_Èçõîä"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<êîíòðîë>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle êàòåãîðèçèðàí ìîíèòîð"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle ìîíèòîð"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Îáèêíîâåí ìîíèòîð"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Îáèêíîâåí Gtk+ ìîíèòîð"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ïóñíè Aurora ïðè ñòàðòèðàíå"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Ðåæèì íà Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Ðåæèì íà Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Â ìîìåíòà èçïîëçâàòå %s êàòî ïðîãðàìà çà ñòàðòèðàíå.\n"
-"Öúêíåòå íà Íàñòðîé, çà äà ñòàðòèðàòå óñòàíîâÿâàùèÿ ìàãüîñíèê."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Íàñòðîé"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Ñèñòåìåí ðåæèì"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Ïóñíè X-Window ñèñòåìàòà ïðè ñòàðòèðàíå"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Íå, íå èñêàì autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Äà, èñêàì autologin ñ òîâà (ïîòðåáèòåë, äåñêòîï)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "íå ìîãà äà îòâîðÿ /etc/inittab çà ÷åòåíå: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "ÃÁ"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "ÊÁ"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "ÌÁ"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "ÒÁ"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ìèíóòè"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ìèíóòà"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ñåêóíäè"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Íå ìîãà äà äîáàâÿ ïîâå÷å äÿëîâå"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ìîæåòå äà èçáåðåòå äðóãè åçèöè, êîèòî ùå áúäàò íàëèöå ñëåäèíñòàëàöèÿòà"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ôðàíöèÿ"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Áåëãèéñêà"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Íåìñêà"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Ãðúöêà"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Íîðâåæêà"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Âèæ"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Èòàëèàíñêà"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "ñåðèéíà"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Ïúðâî ñúçäàéòå backup íà ñâîèòå äàííè"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Ïðî÷åòåòå âíèìàòåëíî !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Àêî ñìÿòàòå äà èçïîëçâàòå aboot, îñòàâåòå ñâîáîäíî ïðîñòðàíñòâî (2048 "
-"ñåêòîðà\n"
-"ñà äîñòàòú÷íè) â íà÷àëîòî íà äèñêà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Ãðåøêà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Ìàãüîñíèê"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Èçáåðåòå äåéñòâèå"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Èìàòå åäèí ãîëÿì FAT äÿë\n"
-"(ïî ïðèíöèï ñå ïîëçâàò îò Microsoft Dos/Windows).\n"
-"Ïðåäëàãàì ïúðâî äà ïðîìåíèòå ãîëåìèíàòà íà òîçè äÿë\n"
-"(ùðàêíåòå âúðõó íåãî, à ñëåä òîâà ùðàêíåòå âúðõó \"Ïðîìåíè ãîëåìèíàòà\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Ìîëÿ, öúêíåòå íà äÿëà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Ïîäðîáíîñòè"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Æóðíàëíà FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Ïðàçåí"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Äðóãà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Âèäîâå ôàéëîâà ñèñòåìà:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Ñúçäàé"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Âèä"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âìåñòî òîâà èçïîëçâàéòå ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Èçòðèé"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Ïúðâî èçïîëçâàéòå 'Äåìîíòèðàíå'"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Ñëåä ïðîìÿíà íà òèïà íà äÿëà %s, âñè÷êè äàííè âúðõó íåãî ùå áúäàò çàãóáåíè"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Èçáåðåòå äÿë"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Èçáåðåòå äðóã äÿë"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Èçëåç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Ïðåìèíè â Åêñïåðòåí ðåæèì"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ïðåìèíè â Íîðìàëåí ðåæèì"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Âúðíè"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Ïðîäúëæåíèå âúïðåêè âñè÷êî ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Èçõîä áåç çàïèñ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Èçõîä, áåç äà çàïèñ íà òàáëèöàòà íà äÿëîâåòå ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Èñêàòå ëè äà çàïàçèòå ïðîìåíèòå â /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Àâòîìàòè÷íî ñúçäàâàíå"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Èç÷èñòè âñè÷êî"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Èíôîðìàöèÿòà çà òâúðäèÿ äèñê"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Âñè÷êè ïúðâè÷íè äÿëîâå ñå èçïîëçâàò"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Íå ìîãà äà äîáàâÿ ïîâå÷å äÿëîâå"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Àêî èñêàòå îùå äÿëîâå, ìîëÿ èçòðèéòå åäèí, çà äà ìîæåòå äà ñúçäàäåòå åäèí "
-"ðàçøèðåí äÿë"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Çàïàçè òàáëèöàòà ñ äÿëîâåòå"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Âúçñòàíîâè òàáëèöàòà ñ äÿëîâåòå"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Ñïàñÿâàíå òàáëèöàòà ñ äÿëîâåòå"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ïðåçàðåäè òàáëèöàòà ñ äÿëîâåòå"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Àâòîìàòè÷íî ìîíòèðàíå íà ñìåíÿåì íîñèòåë"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Èçáåðåòå ôàéë"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Ðåçåðâíàòà òàáëèöà íà äÿëîâåòå íå å ñúñ ñúùàòà ãîëåìèíà\n"
-"Äà ïðîäúëæà ëè âñå ïàê ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Ïðåäóïðåæäåíèå"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ñëîæåòå äèñêåòà âúâ ôëîïèòî\n"
-"Âñè÷êè äàííè, íàìèðàùè ñå âúðõó äèñêåòàòà, ùå áúäàò çàãóáåíè"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Îïèòâàì ñå äà ñïàñÿ òàáëèöàòà íà äÿëîâåòå"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Ïîäðîáíà èíôîðìàöèÿ"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ìÿñòî íà ìîíòèðàíå"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Îïöèè"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ïðîìåíè ãîëåìèíàòà"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Ïðåìåñòè"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Ôîðìàòèðàé"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Ìîíòèðàé"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ïðèáàâè êúì RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ïðèáàâè êúì LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Äåìîíòèðàé"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ïðåìàõíè îò RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ïðåìàõíè îò LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ìîäèôèöèðàé RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Èçïîëçâàé çà loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Ñúçäàé íîâ äÿë"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Íà÷àëåí ñåêòîð: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Ãîëåìèíà â MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Âèä ôàéëîâà ñèñòåìà: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ìÿñòî íà ìîíòèðàíå: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Ïðåäïî÷èòàíèå: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Äà ïðåìàõíà ëè loopback ôàéëà ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Ïðîìÿíà òèïà íà äÿëà"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Êîÿ ôàéëîâà ñèñòåìà èñêàòå ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Ïðåõîä îò ext2 êúì ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Êúäå èñêàòå äà ìîíòèðàòå loopback-ôàéëà %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Êúäå èñêàòå äà ìîíòèðàòå óñòðîéñòâî %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Íå ìîãà äà ìàõíà òî÷êàòà íà ìîíòèðàíå, òúé êàòî äÿëúò ñå èçïîëçâà çà "
-"loopback.\n"
-"Ïúðâî ìàõíåòå loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Èç÷èñëÿâàì ãðàíèöèòå íà fat ôàéëîâàòà ñèñòåìà"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ïðîìÿíà íà ãîëåìèíàòà"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ãîëåìèíàòà íà äÿëà íå ìîæå äà áúäå ïðîìåíåíà"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Âñè÷êè äàííè íà òîçè äÿë òðÿáâà äà áúäàò àðõèâèðàíè"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ñëåä ïðîìÿíà ãîëåìèíàòà íà äÿëà %s, äàííète âúðõó íåãî ùå áúäàò çàãóáåíè"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Èçáåðåòå íîâà ãîëåìèíà"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Íîâà ãîëåìèíà â MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Íà êîé äèñê èñêàòå äà ãî ïðåìåñòèòå ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Ñåêòîð"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Íà êîé ñåêòîð èñêàòå äà ãî ïðåìåñòèòå?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ìåñòåíå"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ìåñòâÿ äÿëà ... "
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Èçáåðåòå ñúùåñòâóâàù RAID çà ïðèáàâÿíå"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "íîâ"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Èçáåðåòå ñúùåñòâóâàù LVM çà ïðèáàâÿíå"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM èìå ?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Òîçè äÿë íå ìîæå äà áúäå èçïîëçâàí çà loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Èìå íà loopback ôàéëà: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Äàéòå èìå íà ôàéë"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Ôàéëúò âå÷å ñå èçïîëçâà òî äðóã loopback, èçáåðåòå äðóã ôàéë."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Ôàéëúò âå÷å ñúøåñòâóâà. Äà ãî èçïîëçâàì ëè ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Îïöèè çà mount:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Ðàçëè÷íè"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "óñòðîéñòâî"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "íèâî"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ãîëåìèíà íà ïàð÷åòî"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Âíèìàíèå: òàçè îïåðàöèÿ å îïàñíà"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Êàêúâ òèï ðàçäåëÿíå íà äÿëîâå ?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ñúæàëÿâàì, íî íå ìîãà äà ïðèåìà äà ñúçäàì /boot òîëêîâà íàâúòðå âúðõó äèñêà "
-"(âúðõó öèëèíäúð > 1024).\n"
-"Èëè èçïîëçâàòå LILO è òî íå ðàáîòè, èëè íå èçïîëçâàòå LILO è íÿìàòå íóæäà "
-"îò /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Äÿëúò, êîéòî ñòå ìàðêèðàëè çà root (/) å ôèçè÷åñêè ðàçïîëîæåí îòâúä\n"
-"1024-èÿ öèëèíäúð íà òâúðäèÿ äèñê è íÿìàòå /boot äÿë.\n"
-"Àêî ñìÿòàòå äà èçïîëçâàòå boot ìåíèäæúðà LILO, áúäåòå âíèìàòåëíè ïðè\n"
-"ïðèáàâÿíåòî íà /boot äÿë"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Ìàðêèðàëè ñòå ñîôòóåðåí RAID äÿë êàòî root (/).\n"
-"Íÿìà çàðåæäàùà ïðîãðàìà, êîÿòî äà ìîæå äà ñå ñïðàâè ñ íåãî áåç /boot äÿë.\n"
-"Òàêà ÷å äîáàâåòå /boot äÿë"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Òàáëèöàòà íà äÿëîâåòå íà óñòðîéñòâî %s ùå áúäå çàïèñàíà âúðõó äèñêà !"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Òðÿáâà äà ðåñòàðòèðàòå, ïðåäè ïðîìåíèòå äà âëÿçàò â ñèëà"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ñëåä ôîðìàòèðàíå íà äÿëà %s, âñè÷êè äàííè âúðõó íåãî ùå áúäàò çàãóáåíè"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ôîðìàòèðàíå"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ôîðìàòèðàíå íà loopback ôàéëà %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ôîðìàòèðàíå íà äÿëà %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Ñêðèé ôàéëîâåòå"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Ïðåìåñòè ôàéëîâåòå íà íîâ äÿë"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Äèðåêòîðèÿòà %s âå÷å ñúäúðæà íÿêàêâè äàííè\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Ïðåìåñòè ôàéëîâåòå íà íîâ äÿë"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Êîïèðàíå íà %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Èçòðèâàíå íà %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Óñòðîéñòâî: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Áóêâà íà óñòðîéñòâîòî ïîä DOS: %s (ïðîñòî ïðåäïîëîæåíèå)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Âèä: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Èìå: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Íà÷àëî: ñåêòîð %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Ðàçìåð: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ñåêòîðà"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Îò öèëèíäúð %d äî öèëèíäúð %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Ôîðìàòèðàí\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Íåôîðìàòèðàí\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Ìîíòèðàí\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback ôàéë(îâå):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Äÿë, êîéòî ñå ñòàðòèðà ïî ïîäðàçáèðàíå\n"
-"    (çà MS-DOS boot, íå çà lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Íèâî %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ðàçìåð íà ïàð÷åòî %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-äèñêîâå %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Èìå íà loopback ôàéëà: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Âåðîÿòíî å òîçè äÿë äà å\n"
-"Äðàéâåð-äÿë, ìîæå áè òðÿáâà\n"
-"òðÿáâà äà ãî îñòàâèòå.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Òàçè ñïåöèàëíà ñòàðòèðàùà\n"
-"èâèöà íà äÿëà å çà äâîéíî\n"
-"ñòàðòèðàíå íà ñèñòåìàòà âè.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ðàçìåð: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ãåîìåòðèÿ: %s öèëèíäðè, %s ãëàâè, %s ñåêòîðè\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Èíôîðìàöèÿ: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-äèñêîâå %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Òèï íà òàáëèöàòà ñ äÿëîâå: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "íà øèíà %d àäðåñ %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Îïöèè: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Âèä ôàéëîâà ñèñòåìà: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Ïàðîëàòà å ïðåêàëåíî ïðîñòà (òðÿáâà äà áúäå äúëãà ïîíå %d ñèìâîëà)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Ïàðîëèòå íà ñúâïàäàò"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Ïðîìÿíè òèïà"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Ìîëÿ, öúêíåòå íà íîñèòåëÿ"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ñúðâúð"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ôîðìàòèðàíå îò %s ïðîâàëåíî"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "íå çíàì êàê äà ôîðìàòèðàì %s â òèï %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck èçëåçå ñ èçõîäåí êîä %d èëè ñèãíàë %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ãðåøêà ïðè äåìîíòèðàíåòî íà %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "ïðîñò"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ñúðâúð"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Íå ìîæåòå äà èçïîëçâàòå JFS çà äÿë ïî-ìàëúê îò 16 ÌÁ"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Íå ìîæåòå äà èíñòàëèðàíå ReiserFS íà äÿë ïî-ìàëúê îò 32 ÌÁ"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Òî÷êèòå íà ìîíòèðàíå òðÿáâà äà çàïî÷âàò ñ /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Âå÷å èìà äÿë ñ òàçè ìÿñòî íà ìîíòèðàíå %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Íå ìîæåòå äà èçïîëçâàòå LVM ëîãè÷åñêè òèï çà ìÿñòî íà ìîíòèðàíå %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Òàçè äèðåêòîðèÿ òðÿáâà äà îñòàíå â ðàìêèòå íà root ôàéëîâàòà ñèñòåìà."
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Íóæäàåòå ñå îò èñòèíñêà ôàéëîâà ñèñòåìà (ext2, reiserfs) çà òàçè òî÷êà íà "
-"ìîíòèðàíå\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Íå ìîæåòå äà èçïîëçâàòå LVM ëîãè÷åñêè òèï çà ìÿñòî íà ìîíòèðàíå %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Íÿìà äîñòàòú÷íî ìÿñòî çà àâòîìàòè÷íî çàåìàíå"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ãðåøêà ïðè îòâàðÿíå íà %s çà çàïèñ: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ïîÿâè ñå ãðåøêà - íå ñà îòêðèòè âàëèäíè óñòðîéñòâà, âúðõó êîèòî äà áúäàò "
-"ñúçäàäåíè íîâè ôàéëîâè ñèñòåìè. Ìîëÿ ïðîâåðåòå òâúðäèÿ ñè äèñê ñè çà "
-"ïðè÷èíàòà çà òîçè ïðîáëåì"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Íÿìàòå íèêàêâè äÿëîâå!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux å ìíîãîïîòðåáèòåëñêà ñèñòåìà, êîÿòî îçíà÷àâà, ÷å âñåêè ïîòðåáèòåë "
-"ìîæå\n"
-"äà èìà ñâîè ïðåäïî÷åòàíèÿ, ôàéëîâå è ò.í.. ìîæåòå äà ïðî÷åòåòå Ðúêîâîñòâîòî "
-"íà\n"
-"Ïîòðåáèòåëÿ, çà äà íàó÷èòå ïîâå÷å.\n"
-"Çà ðàçëèêà îò Root, êîéòî å àäìèíèñòðàòîðúò, ïîòðåáèòåëèòå, êîèòî ùå "
-"äîáàâèòå òóê\n"
-"íÿìà äà ìîãàò äà ïðîìåíÿò íèùî îñâåí ñîáñòâåíèòå ñè ôàéëîâå è òåõíèòå "
-"íàñòðîéêè.\n"
-"Ùå òðÿáâà äà ñúçäàäåòå ïîíå åäèí îáèêíîâåí ïîòðåáèòåë çà ñåáå ñè.\n"
-"Ñ òîçè àêàóíò ùå òðÿáâà äà âëèçàòå çà ðóòèííà äåéíîñò. Âúïðåêè òîâà "
-"ïðàêòèêàòà\n"
-"äà âëèçàòå êàòî root åæåäíåâíî, ìîæå äà áúäå ìíîãî îïàñíà ! È íàé-"
-"ìàëêàòàãðåøêà\n"
-"ìîæå äà îçíà÷àâà, ÷å ñèñòåìàòà âè íÿìà äà ðàáîòè ïîâå÷å. Àêî íàïðàâèòå íÿêîÿ "
-"ñåðèîçíà\n"
-"ãðåøêà êàòî ïîòðåáèòåë, òîâà ìîæå ñà äà äîâåäå äî çàãóáà íà ÷àñò îò "
-"èíôîðìàöèÿòà,\n"
-"íî íå è íà öÿëàòà ñèñòåìà.\n"
-"\n"
-"Ïúðâî, òðÿáâà äà ñè âúâåäåòå èìåòî. Òîâà íå å çàäúëæèòåëíî, ðàçáèðà ñå, "
-"âñúùíîñò\n"
-"ìîæåòå äà âúâåäåòå êàêâîòî è äà å. DrakX ñëåä òîâà ùå èçáåðå ïúðâàòà "
-"âúâåäåíà\n"
-"â êóòèéêàòà äóìà è ùå ãî èçêàðà êàòî ïîòðåáèòåëñêî èìå. Òîâà å èìåòî, ñ "
-"êîåòî\n"
-"âñúùíîñò îïðåäåëåíèÿò ïîòðåáèòåë ùå âëèçà â ñèñòåìàòà. Ìîæåòå äà ãî "
-"ïðîìåíèòå.\n"
-"Òðÿáâà äà âúâåäåòå è ïàðîëà òóê. Ïàðîëàòà íà íåïðåâèëåãèðîâàí (îáèêíîâåí) "
-"ïîòðåáèòåë\n"
-"íå å òîëêîâà ôàòàëíà êàòî òàçè íà Root îò ãëåäíà òî÷êà íà ñèãóðíîñòòà, íî "
-"âñå\n"
-"ïàê íÿìà ïðè÷èíà äà ÿ ïîäöåíÿâàòà, òúé êàòî ðèñêóâàòå ôàéëîâåòå ñè.\n"
-"\n"
-"Ñëåä êàòî öúêíåòå íà \"Ïðèåìè ïîòðåáèòåë\", ìîæåòå äà äîáàâèòå êîëêîòî ñè "
-"èñêàòå.\n"
-"Äîáàâåòå ïî åäèí ïîòðåáèòåë çà âñåêè îò ïðèÿòåëèòå ñè: áàùà ñè, ñåñòðà ñè, "
-"íàïðèìåð.\n"
-"Êîãàòî ñòå äîáàâèëè âñè÷êè ïîòðåáèòåëè, êîèòî èñêàòå, öúêíåòå Ãîòîâî.\n"
-"\n"
-"Öúêíåòå íà áóòîíà \"Íàïðåäíè÷àâ\", çà äà ïðîìåíèòå îáâèâêàòà ïî ïîäðàçáèðàíå "
-"íà\n"
-"ïîòðåáèòåëÿ (bash ïî ïîäðàçáèðàíå)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ïî-ãîðå ñà èçáðîåíè çàñå÷åíèòå Linux äÿëîâå ñúùåñòâóâàùè\n"
-"íà òâúðäèÿ âè äèñê. Ìîæåòå äà çàïàçèòå èçáîðà íàïðàâåí îò ìàãüîñíèêà, òå ñà\n"
-"äîáðè çà îáùà óïîòðåáà. Àêî ãè ïðîìåíèòå, òðÿáâà äà ïîíå äà îïðåäåëèòå\n"
-"root äÿë (\"/\"). Íå èçáèðàéòå ïðåêàëåíî ìàëêè äÿëîâå, çàùîòî íÿìà äà "
-"ìîæåòå\n"
-"äà èíñòàëèðàòå äîñòàòú÷íî ñîôòóåð. Àêî èñêàòå äà ñúõðàíÿâàòå äàííèòå ñè íà\n"
-"îòäåëåí äÿë, òðÿáâà äà èçáåðåòå \"/home\" (âúçìîæíî å ñàìî, àêî èìàòå "
-"ïîâå÷å\n"
-"îò åäèí Linux äÿë).\n"
-"\n"
-"\n"
-"Çà èíôîðìàöèÿ, âñåêè äÿë å ïîêàçàí, êàêòî ñëåäâà: \"Èìå\", \"Êàïàöèòåò\".\n"
-"\n"
-"\n"
-"\"Èìåòî\" ñå êîäèðà êàêòî ñëåäâà: \"òèï íà äèñêà\", \"íîìåð íà äèñêà\",\n"
-"\"íîìåð íà äÿë\" (íàïðèìåð, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òèïúò íà äèñêà\" ìîæå äà å \"hd\", àêî å IDE òâúðä äèñê, èëè \"sd\", àêî "
-"å\n"
-"SCSI òâúðä äèñê.\n"
-"\n"
-"\n"
-"\"Íîìåðúò íà äèñêà\" âèíàãè å áóêâàòà ñëåä \"hd\" èëè \"sd\". Ïðè IDE "
-"äèñêîâå:\n"
-"\n"
-"   * \"a\" îçíà÷àâà \"master äèñê íà ïúðâèÿ IDE êîíòðîëåð\",\n"
-"   * \"b\" îçíà÷àâà \"slave äèñê íà ïúðâèÿ IDE êîíòðîëåð\",\n"
-"   * \"c\" îçíà÷àâà \"master äèñê íà âòîðèÿ IDE êîíòðîëåð\",\n"
-"   * \"d\" îçíà÷àâà \"slave äèñê íà âòîðèÿ IDE êîíòðîëåð\".\n"
-"\n"
-"\n"
-"Ïðè SCSI óñòðîéñòâà, \"a\" îçíà÷àâà \"ïúðâè òâúðä äèñê\", \"b\" îçíà÷àâà "
-"\"âòîðè òâúðä äèñê\" è ò.í.."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Èíñòàëàöèÿòà íà Mandrake Linux å ðàçïîëîæåíà íà íÿêîëêî CDROM-à. DrakX\n"
-"çíàå äàëè èçáðàí ïàêåò íå ñå íàìèðà íà äðóã CDROM èëè ùå èçâàäè òåêóùîòî\n"
-"CD è ùå âè îñòàâè äà âêàðàòå òîâà, îò êîåòî èìà íóæäà."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ñåãà å ìîìåíòúò äà îïðåäåëèòå êîè ïðîãðàìè èñêàòå äà áúäàò èíñòàëèðàíè íà\n"
-"ñèñòåìàòà âè. Â Mandrake Linux äèñòðèáóöèÿòà èìà õèëÿäè ïàêåòè, íî íå å\n"
-"çàäúëæèòåëíî äà ãè çíàåòå íàèçóñò.\n"
-"\n"
-"Àêî èçâúðøâàòå ñòàíäàðòíà èíñòëàöèÿ îò CDROM, ïúðâî ùå áúäåòå ïîïèòàíè êîè\n"
-"CD-òà èìàòå (â Åêñïåðòåí ðåæèì). Ïðîâåðåòå çàãëàâèÿòà íà CD-òàòà è ïîñî÷åòå\n"
-"êóòèéêèòå ñúîòâåòñòâàùè íà CD-òàòà, ñ êîèòî ðàçïîëàãàòå. Öúêíåòå \"OK\",\n"
-"êîãàòî ñòå ãîòîâè äà ïðîäúëæèòå.\n"
-"\n"
-"Ïàêåòèòå ñà ïîäðåäåíè â ãðóïè ñúîòâåòñòâàùè íà ïðàêòè÷åñêàòà óïîòðåáà íà\n"
-"ìàøèíàòà âè. Ãðóïèòå, ñàìè ïî ñåáå ñè, ñà ïîäðåäåíè â ÷åòèðè ñåêöèè:\n"
-"\n"
-" * \"Ðàáîòíà ñòàíöèÿ\": àêî ñìÿòàòå äà èçïîëçâàòå ìàøèíàòà ñè êàòî ðàáîòíà "
-"ñòàíöèÿ,\n"
-"èçáåðåòå åäíà èëè ïîâå÷å ñúîòâåòíèòå ãðóïè.\n"
-"\n"
-" * \"Ðàçðàáîòêà\": àêî ìàøèíàòà âè ùå áúäå èçïîëçâàíå çà ïðîãðàìèðàíå, "
-"èçáåðåòå\n"
-"æåëàíàòà(èòå) ãðóïà(è).\n"
-"\n"
-" * \"Ñúðâúð\": íàêðàÿ, àêî ìàøèíàòà âè ùå áúäå èçïîëçâàíà çà ñúðâúð, ùå\n"
-"ìîæåòå äà èçáåðåòå êîè îò íàé-÷åñòî èçïîëçâàíèòå óñëóãè èñêàòå äà èìàòå\n"
-"èíñòàëèðàíè íà ìàøèíàòà.\n"
-"\n"
-" * \"Ãðàôè÷íà ñðåäà\": òóê ìîæåòå äà èçáåðåòå ïðåäïî÷èòàíàòà ãðàôè÷íà "
-"ñðåäà.\n"
-"Ïîíå åäíà òðÿáâà äà áúäå èçáðàíà, àêî èñêàòå äà èìàòå ãðàôè÷íà ñðåäà !\n"
-"\n"
-"Ïðåìåñòâàéêè êóðñîðà íà ìèøíàòà íàä èìåòî íà ãðóïàòà, ùå âèäèòå êðàòúê\n"
-"îáÿñíåíèòåëåí òåêñò çà íåÿ.\n"
-"\n"
-"Ìîæåòå äà öúêíåòå êóòèéêàòà \"Èíäèâèäóàëåí èçáîð íà ïàêåòè\", êîÿòî å "
-"ïîëåçíà,\n"
-"àêî ñòå çàïîçíàòè ñ ïàêåòèòå, êîèòî ùå âè áúäàò ïðåäëîæåíè èëè àêî èñêàòå "
-"äà\n"
-"èìàòå ïúëåí êîíòðîë íàä òîâà, êîåòî äà áúäå èíñòàëèðàíî.\n"
-"\n"
-"Àêî ñòå çàïî÷íàëè èíñòàëàöèÿòà â ðåæèì íà \"Îáíîâÿâàíå\", ìîæåòå äà "
-"èçêëþ÷èòå\n"
-"âñè÷êè ãðóïè, çà äà èçáåãíåòå èíñòàëèðàíåòî íà íîâè ïàêåòè. Òîâà å ïîëåçíî\n"
-"ïðè ïîïðàâêà èëè îáíîâÿâàíå íà ñúùåñòâóâàùàòà ñèñòåìà."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Íàêðàÿ, â çàâèñèìîñò îò èçáîðà âè äàëè äà èçáèðàòå ïàêåòè åäèí ïî åäèí, ùå\n"
-"âè áúäå ïðåäñòàâåíî äúðâî ñúäúðæàùî âñè÷êè ïàêåòè ïîäðåäåíè ïî ãðóïè è\n"
-"ïîäðãðóïè. Äîêàòî îáõîæäàòå äúðâîòî, ìîæåòå äà èçáåðåòå öåëè ãðóïè, "
-"ïîäãðóïè\n"
-"èëè îòäåëíè ïàêåòè.\n"
-"\n"
-"Êîãàòî ïîñî÷èòå ïàêåò îò äúðâîòî, ùå ñå ïîÿâè îïèñàíèå âäÿñíî. Êîãàòî\n"
-"èçáîðúò å ïðèêëþ÷åí, öúêíåòå áóòîíà \"Èíñòàëèðàé\", êîéòî ùå ïóñíå ïðîöåñà\n"
-"íà èíñòàëàöèÿ. Â çàâèñèìîñò îò ñêîðîñòòà íà õàðäóåðà âè è áðîÿ íà ïàêåòèòå,\n"
-"êîèòî èñêàòå äà áúäàò èíñòàëèðàíè, ïðîöåñúò ìîæå äà îòíåìå èçâåñòíî âðåìå.\n"
-"Î÷àêâàíîòî âðåìå çà ïðèêëþ÷âàíå íà ïðîöåñà, ÷å áúäå ïîêàçàíî íà åêðàòà, çà\n"
-"äà âè ïîìîãíå äà ïðåöåíèòå äàëè èìàòå äîñòàòú÷íî âðåìå äà ñå íàñëàäèòå íà\n"
-"÷àøà êàôå.\n"
-"\n"
-"!! Àêî å èçáðàí ñúðâúðåí ïàêåò, áèëî òî óìèøëåíî èëè çàùîòî å ÷àñò îò öÿëà\n"
-"ãðóïà, ùå áúäåòå ïîìîëåíè çà ïîòâúðæäåíèå, ÷å íàèñòèíà èñêàòå òîçè ñúðâúð\n"
-"äà áúäå èíñòàëèðàí.  Mandrake Linux, âñè÷êè ñúðâúðè òðúãâàò ïî "
-"ïîäðàçáèðàíå\n"
-"ïðè çàðåæäàíå.Äàæå àêî ñà ñèãóðíè è íÿìàò èçâåñòíè ïðîáëåìè, êîãàòî\n"
-"äèñòðèáóöèÿòà ñå ðàçïðîñòðàíÿâà, ìîæå äà ñå ñëó÷è òàêà, ÷å äà ñå ïîÿâÿò\n"
-"äóïêè â ñèãóðíîñòòà, ñëåä êàòî âåðñèÿòà íà Mandrake Linux å çàâúðøåíà. Àêî\n"
-"íå çíàåòå çà êàêâî ñëóæè îïðåäåëåíà óñëóãà èëè çàùî å èíñòàëèðàíà, öúêíåòå\n"
-"\"Íå\". Ñ öúêàíå íà \"Äà\"  ùå èíñòàëèðàòå èçáðîåíè óñëóãè è òå ùå áúäàò\n"
-"ñòàðòèðàíè àâòîìàòè÷íî ïî ïîäðàçáèðàíå. !!\n"
-"\n"
-"Îïöèÿòà \"Àâòîìàòè÷íè çàâèñèìîñòè\" èçêëþ÷âà ïðåäóïðåäèòåëíèòå äèàëîçè,\n"
-"êîãàòî èíñòàëàòîðúò àâîìàòè÷íî ðåøè èçáåðå ïàêåò. Òîâà ñå ñëó÷âà, çàùîòî\n"
-"å ðåøèë, ÷å ñå íóæäàå äà çàäîâîëè çàâèñèìîñò ñ äðóã ïàêåò, çà äà ïðèêëþ÷è\n"
-"óñïåøíî èíñòàëàöèÿòà.\n"
-"\n"
-"Ìàëêàòà èêîíêà íà äèñêåòêà â äúíîòî íà ñïèñúêà ïîçâîëÿâà äà çàðåäèòå ñïèñúê\n"
-"ñ ïàêåòè îò ïðåäèøíà èíñòàëàöèÿ. Àêî öúêíåòå íà òàçè èêîíêà, ùå áúäåòå\n"
-"ïîìîëåíè äà âêàðàòå äèñêåòà ñúçäàäåíà ïðåäè òîâà â êðàÿ íà äðóãà "
-"èíñòàëàöèÿ.\n"
-"Âèæòå âòîðàòà ïîäñêàçêà ïî âðåìå íà ïîñëåäíàòà ñòúïêà, çà òîâà êàê äà\n"
-"ñúçäàäåòå òàêàâà äèñêåòà."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Àêî èñêàòå äà ñâúðæåòå êîìïþòúðà ñè êúì Èíòåðíåò èëè êúì ëîêàëíà ìðåæà, "
-"ìîëÿ\n"
-"èçáåðåòå ïîäõîäÿùàòà îïöèÿ. Ìîëÿ, âêëþ÷åòå óñòðîéñòâîòî ñè ïðåäè äà "
-"èçáåðåòå\n"
-"îïöèÿòà, çà äà äàäåòå âúçìîæíîñò íà DrakX äà ãî çàñå÷å.\n"
-"\n"
-"Mandrake Linux èçâúðøâà íàñòðîéêàòà íà Èíòåðíåò âðúçêàòà ïî âðåìå íà\n"
-"èíñòàëàöèÿ. Äîñòúïíèòå âðúçêè: îáèêíîâåí ìîäåì, ISDN ìîäåì, ADSL âðúçêà,\n"
-"êàáåëåí ìîäåì è íàêðàÿ îáèêíîâåíà LAN âðúçêà (Ethernet).\n"
-"\n"
-"Òóê íÿìà ïîäðîáíî äà ðàçãëåæäàìå âñÿêà íàñòðîéêà. Ïðîñòî áúäåòå ñèãóðíè, ÷å\n"
-"èìàòå äîñòàòú÷íî äàííè îò Èíòåðíåò äîñòàâ÷èêà ñè èëè ñèñòåìíèÿ\n"
-"àäìèíñèòðàòîð.\n"
-"\n"
-"Ìîæåòå äà ñå êîíñóëòèðàòå ñ ãëàâàòà â ðúêîâîäñòâîòî çà Èíòåðíåò âðúçêèòå çà\n"
-"ïîäðîáíîñòè çà íàñòðîéêàòà èëè ïðîñòî èç÷àêàéòå ñèñòåìàòà âè äà áúäå\n"
-"èíñòàëèðàíà è èçïîëçâàéòå ïðîãðàìàòà îïèñàíà òàì, çà äà íàñòðîèòå âðúçêàòà.\n"
-"\n"
-"Àêî èñêàòå äà íàñòðîèòå ìðåæàòà ïî-êúñíî ñëåä èíñòàëàöèÿ èëè àêî ñòå "
-"ñâúðøèëè\n"
-"ñ íàñòðîéêàòà íà ìðåæàòà, öúêíåòå \"Îòêàç\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ñåãà ìîæåòå äà èçáåðåòå êîè óñëóãè äà ñå ïóñêàò ïðè ñòàðòèðàíå.\n"
-"\n"
-"Òóê ñà ïðåäñòàâåíè âñè÷êè óñëóãè, äîñòúïíè ñ íàñòîÿùàòà èíñòàëàöèÿ.\n"
-"Ïðåãëåäàéòå ãè âíèìàòåëíî è èçêëþ÷åòå òåçè, êîèòî íå âè òðÿáâàò âèíàãè ïðè "
-"ñòàðòèðàíå.\n"
-"\n"
-"Ìîæåòå âèäèòå êðàòúê îáÿñíèòåëåí òåêñò çà óñëóãàòà, êàòî ïîñòàâèòå êóðîðà íà "
-"ìèøêàòà ñè\n"
-"íàä èìåòî íà óñëóãàòà. Àêî íå ñòå ñèãóðíè, äàëè óñëóãàòà å ïîëåçíà èëè íå, "
-"ïî-äîáðå\n"
-"å äà îñòàâèòå èçáîðà ïî ïîäðàçáèðàíå.\n"
-"\n"
-"Âíèìàâàéòå ñ òàçè ñòúïêà, àêî ñìÿòàòå äà èçïîëçâàòå ìàøèíàòà ñè êàòî "
-"ñúðâúð:\n"
-"ñèãóðíî íå áèõòå èñêàëè äà ïóñêàòå óñëóãè, îò êîèòî íå ñå íóæäàåòå. Ìîëÿ,\n"
-"çàïîìíåòå, ÷å íÿêîè óñëóãè ìîãàò äà áúäàò îïàñíè, àêî ñà âêëþ÷åíè íà "
-"ñúðâúðà.\n"
-"Ïî ïðèíöèï, èçáèðàéòå ñàìî óñëóãèòå, îò êîèòî íàèñòèíà ñå íóæäàåòå."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-#, fuzzy
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (îð X Window System) å ñúðöåòî íà GNU/Linux ãðàôè÷íèÿ èíòåðôåéñ, íà êîéòî\n"
-"ñå îñëàíÿò ãðàôè÷íèòå ñðåäè (KDE, Gnome, AfterStep, WindowMaker...) "
-"ñâúðçàíè\n"
-"ñ Mandrake Linux.  òàçè ñåêöèÿ, DrakX ùå ñå àâòîìàòè÷íî äà íàñòðîè X.\n"
-"\n"
-"Èçêëþ÷èòåëíî ðÿäêî ñå ñëó÷âà äà ñå ïðîâàëè, îñâåí àêî õàðäóåðúò íå å ìíîãî\n"
-"ñòàð (èëè ïðåêàëåíî íîâ). Àêî óñïåå, ùå ñòàðòèðà X àâòîìàòè÷íî ñ íàé-"
-"äîáðàòà\n"
-"ðàçäåëèòåëíà ñïîñîáíîñò â çàâèñèìîñò îò ãîëåìèíàòà íà ìîíèòîðà âè. Ùå ñå\n"
-"ïîÿâè ïðîçîðåö, çà äà âè ïîïèòà äàëè ãî âèæäàòå.\n"
-"\n"
-"Àêî èçâúðøâàòå \"Åêñïåðòíà\" èíñòàëàöèÿ, ùå áúäåòå âúâåäåíè â ìàãüîñíèêà çà\n"
-"íàñòðîéêà íà X. Âèæòå ñúîòâåòíàòà ñåêöèÿ íà ðúêîâîäñòâîòî çà ïîâå÷å\n"
-"èíôîðìàöèÿ çà ìàãüîñíèêà.\n"
-"\n"
-"Àêî âèäèòå ñúîáùåíèåòî, íàòèñíåòå \"Äà\", ñëåä êîåòî DrakX ùå ïðîäúëæè ñúñ\n"
-"ñëåäâàùàòà ñòúïêà. Àêî íå âèäèòå ñúîáùåíèåòî, òîâà îçíà÷àâà, ÷å íàñòðîéêàòà\n"
-"å ñãðåøåíà è òåñòúò àâòîìàòè÷íî ùå áúäå ïðèêëþ÷åí ñëåä 10 ñåêóíäè,\n"
-"âúçñòàíîâÿâàéêè åêðàíà."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Ïúðâèÿ ïúò, êîãàòî îïèòàòå íàñòðîéêàòà íà X, ìîæå áè íÿìà äà ñòå äîâîëíè îò\n"
-"îò âèäà (åêðàíúò å ïðåêàëåíî ìàëúê, îòìåñòåí íàëÿâî èëè íàäÿñíî...). "
-"Âúïðåêè\n"
-"òîâà, äàæå àêî X òðúãíå êàòî õîðàòà, DrakX ùå âè ïîïèòà äàëè íàñòðîéêàòà âè\n"
-"äîïàäà. Ñúùî òàêà, ÷å âè ïðåäëîæè ïðîìÿíà, êàòî ïîêàæå ñïèñúê íà âàëèäíè\n"
-"ðåæèìè, êîèòî å óñïÿë äà íàìåðè, ñ ìîëáà äà ïîñî÷èòå åäèí.\n"
-"\n"
-"Êàòî ïîñëåäíà âúçìîæíîñò, àêî âñå îùå íå ìîæåòå äà ïîäêàðàòå X, èçáåðåòå\n"
-"\"Ïðîìÿíà íà ãðàôè÷íàòà êàðòà\", ïîñî÷èòå \"Íåèçáðîåíà êàðòà\", è, êîãàòî\n"
-"áúäåòå ïîïèòàíè êîé ñúðâúð äà áúäå èçïîëçâàí, èçáåðåòå \"FBDev\". Òîâà å\n"
-"áåçãðåøíà îïöèÿ, êîÿòî ðàáîòè íà âñÿêà ïî-íîâà êàðòà. Òîãàâà èçáåðåòå "
-"\"Îïèòàé ïàê\", çà äà ñòå ñèãóðíè."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Íàêðàÿ, ùå áúäåòå ïîïèòàíè äàëè èñêàòå äà âèæäàòå ãðàôè÷íèÿ èíòåðôåéñ ïðè\n"
-"çàðåæäàíå. Îòáåëåæåòå, ÷å òîçè âúïðîñ ùå âè áúäå çàäàäåí äàæå àêî èçáåðåòå,\n"
-"äà íå òåñòâàòå íàñòðîéêàòà. Î÷åâèäíî, áèõòå îòãîâîðèëè ñ \"Íå\", àêî "
-"ìàøèíàòà\n"
-"ùå ðàáîòè êàòî ñúðâúð èëè àêî íÿìà óñïåøíî íàñòðîåí äèñïëåé."
-
-#: ../../help.pm_.c:256
-#, fuzzy
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM-úò èìà âãðàäåí ñïàñèòåëåí ðåæèì. Ìîæåòå äà ãî\n"
-"äîñòèãíåòå, êàòî ñòàðòèðàòå îò CDROM-à, íàòèñíåòå êëàâèøà >>F1<< è íàïèøåòå\n"
-">>rescue<<. Íî ñëó÷àé, ÷å êîìïþòúðúò íå ìîæå äà ñòàðòèðà îò CDROM, ùå "
-"òðÿáâà\n"
-"äà ñå âúðíåòå êúì òàçè ñòúïêà çà ïîìîù â ïîíå äâå ñèòóàöèè:\n"
-"\n"
-" * êîãàòî èñíòàëèðàòå boot loader, DrakX ùå ïðåçàïèøå ñòàðòîâèÿ ñåêòîð (MBR) "
-"íà ãëàâíèÿ âè äèñê (îñâåí àêî íå èçïîëçâàòå äðóã ñòàðòîâ ìåíèäæúð), òàêà ÷å\n"
-"äà ñòàðòèðàòå Windows èëè GNU/Linux (àêî èìàòå Windows â ñèñòåìàòà ñè). Àêî\n"
-"ñå íóæäàåòå äà ïðåèíñòàëèðàòå Windows, èíñòàëàöèîííèÿ ïðîöåñ íà Microsoft\n"
-"ùå ïðåçàïèøå ñòàðòîâèÿ ñåêòîð è íÿìà äà ìîæåòå äà ïóñíåòå âàøèÿ GNU/Linux!\n"
-"\n"
-" * àêî ñå ïîÿâè ïðîáëåì è íå ìîæåòå äà ïóñíåòå GNU/Linux îò òâúðäèÿ ñè "
-"äèñê,\n"
-"òàçè äèñêåòà ùå èìà çà öåë ñàìî äà ñòàðòèðà GNU/Linux. Òÿ ñúäúðæà "
-"çàäîâîëèòåëåí\n"
-"áðîé ñèñòåìíè èíñòðóìåíòè çà âúçñòàíîâÿâàíå íà ñèñòåìà, êîÿòî å çàáèëà ñëåä\n"
-"ñðèâ â çàõðàíâàíåòî, ñëó÷àéíà ãðåøêà, ãðåøêà â ïàðîëàòà èëè íÿêàêâà äðóãà\n"
-"ïðè÷èíà.\n"
-"\n"
-"Êîãàòî öúêíåòå íà òàçè ñòúïêà, ùå áúäåòå ïîìîëåíè äà ïîñòàâèòå äèñê â\n"
-"óñòðîéñòâîòî. Äèñêåòàòà, êîÿòî âêàðàòå, òðÿáâà äà áúäå ïðàçíà èëè äà "
-"ñúäúðæà\n"
-"äàííè, îò êîèòî íå ñå íóæäàåòå. Íÿìà íóæäà äà ÿ ôîðìàòèðàòå, òúé êàòî DrakX\n"
-"ùå ïðåçàïèøå öÿëàòà äèñêåòà."
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Â òîçè ìîìåíò òðÿáâà èçáåðåòå êúäå íà òâúðäèÿ ñè äèñêà äà èíñòàëèðàòå "
-"âàøàòà\n"
-"Mandrake Linux îïåðàöèîííà ñèñòåìà. Àêî òâúðäèÿò âè äèñê å ïðàçåí èëè äðóãà\n"
-"îïåðàöèîííà ñèñòåìà èçïîëçâà öÿëîòî ïðîñòðàíñòâî, ùå òðÿáâà äà ãî "
-"ðàçäåëèòå.\n"
-"Êàçàíî ïðîñòè÷êî, ðàçäåëÿíåòî íà òâúðäèÿ äèñê ñå ñúñòîè â ëîãè÷åñêî "
-"ðàçäåëÿíå\n"
-"öåë äà ñå ñúçäàäå ìÿñòî çà èíñòàëàöèÿ íà íîâàòà Mandrake Linux ñèñòåìà.\n"
-"\n"
-"Òúé êàòî ïðîöåñúò íà ðàçäåëÿíå îáèêíîâåíî å íåîáðàòèì, ðàçäåëÿíåòî ìîæå äà\n"
-"èçãëåæäà ïëàøåù è ñòðÿñêàù, àêî ñòå íåîïèòåí ïîòðåáèòåë. Ñëàâà Áîãó, èìà\n"
-"ìàãüîñíèê, êîéòî îïðîñòÿâà òîçè ïðîöåñ. Ïðåäè äà çàïî÷íåòå, êîíñóëòèðàéòå "
-"ñå\n"
-"ñ ðúêîâîäñòâîòî è íå áúðçàéòå.\n"
-"\n"
-"Àêî ïóñêàòå èíñòàëàöèÿòà â Åêñïåðòåí ðåæèì, ùå áúäåòå âúâåäåíè â DiskDrake,\n"
-"ðàçäåëÿùèÿ èíñòðóìåíò íà Mandrake Linux, êîéòî âè ïîçâîëÿâà äà äîíàñòðîèòå\n"
-"äÿëîâåòå ñè. Âèæòå ãëàâàòà DiskDrake îò ðúêîâîäñòâîòî. Îò èíñòàëàöèîííèÿ\n"
-"èíòåðôåéñ ìîæåòå äà èçïîëçâàòå ìàãüîñíèöèòå, êàòî íàòèñíåòå áóòîíà\n"
-"\"Ìàãüîñíèê\" íà äèàëîãà.\n"
-"\n"
-"Àêî äÿëîâåòå ñà âå÷å îïðåäåëåíè, äàëè îò ïðåäèøíà èíñòàëàöèÿ èëè îò äðóã\n"
-"èñòðóìåíò çà ðàçäåëÿíå, ïðîñòî èçáåðåòå íà êîé äà èíñòàëèðàòå Linux\n"
-"ñèñòåìàòà.\n"
-"\n"
-"Àêî äÿëîâåòå íå ñà îïðåäåëåíè, ùå òðÿáâà äà ñúçäàäåòå òàêèâà èçïîëçâàéêè\n"
-"ìàãüîñíèêà. Â çàâèñèìîñò îò íàñòðîéêàòà íà òâúðäèÿ äèñê, ñà âúçìîæíè "
-"íÿêîëêî\n"
-"îïöèè:\n"
-"\n"
-" * \"Èçïîëçâàé ñâîáîäíîòî ïðîñòðàíñòâî\": òàçè îïöèÿ ïðîñòî ùå äîâåäå òî\n"
-"àâòîìàòè÷íî ïîäåëÿíå íà ïðàçíîòî ïðîñòðàíñòâî íà òâúðäèÿ âè äèñê. Íÿìà äà\n"
-"áúäåòå ïèòàíè çà òîâà.\n"
-"\n"
-" * \"Èçïîëçâàé ñúùåñòâóâàù äÿë\": ìàãüîñíèêúò å çàñÿêúë åäèí èëè ïîâå÷å\n"
-"ñúùåñòâóâàùè Linux äÿëîâå íà òâúðäèÿ âè äèñê. Àêî èñêàòå äà ãè èçïîëçâàòå,\n"
-"èçáåðåòå òàçè îïöèÿ.\n"
-"\n"
-" * \"Èçïîëçâàé ñâîáîäíîòî ïðîñòðàíñòâî íà Windows äÿë\": àêî èìàòå "
-"èíñòàëèðàí\n"
-"Microsoft Windows íà òâúðäèÿ ñè äèñê è òîé çàåìà öÿëîòî äîñòúïíî\n"
-"ïðîñòðàíñòâî íà íåãî, òðÿáâà äà îñâîáîäèòå ìÿñòî çà Linux äàííè. Çà äà\n"
-"íàïðàâèòåòîâà, ìîæåòå äà èçòðèåòå Microsoft Windows äÿëà è äàííèòå (âèæòå\n"
-"ðåøåíèÿòà \"Èçòðèé öåëèÿ äèñê\" èëè \"Åêïåðòåí ðåæèì\") èëè äà ïðîìåíèòå\n"
-"ãîëåìèíàòà íà Microsoft Windows äÿëà. Ïðîìÿíàòà íà ãîëåìèíàòà ìîæå äà áúäå\n"
-"èçâúðøåíà áåç çàãóáà íà äàííè. Òîâà ðåøåíèå ñå ïðåïîðú÷âà, àêî èñêàòå\n"
-"åäíîâðåìåííî Mandrake Linux è Microsoft Windows íà åäèí è ñúùè êîìïþòúð.\n"
-"\n"
-"   Ïðåäè äà èçáåðåòå òàçè îïöèÿ, ìîëÿ, ðàçáåðåòå, ÷å ñëåä òàçè ïðîöåäóðà,\n"
-"ãîëåìèíàòà íà Microsoft Windows äÿëà ùå áúäå ïî-ìàëêà, îòêîëêîòî ïðåäè "
-"òîâà.\n"
-"Ùå èìàòå ïî-ìàëêî ìÿñòî ïîä Microsoft Windows çà ñúõðàíÿâàíå íà äàííè èëè "
-"çà\n"
-"èíñòàëèðà íà íîâ ñîôòóåð.\n"
-"\n"
-" * \"Èçòðèé öåëèÿ äèñê\": àêî èñêàòå äà èçòðèåòå âñè÷êè äàííè è äÿëîâå, "
-"êîèòî\n"
-"ñúùåñòâóâàò íà âàøèÿ òâúðä äèñê è äà ãè çàìåíèòå ñ íîâàòà Mandrake Linux\n"
-"ñèñòåìà, èçáåðåòå òàçè îïöèÿ. Áúäåòå âíèìàòåëíè ñ òîâà ðåøåíèÿ, çàùîòî íÿìà\n"
-"äà ìîæåòå äà âúðíåòå îáðàòíî èçáîðà ñè, ñëåä êàòî ïîòâúðäèòå.\n"
-"\n"
-"   !! Àêî èçáåðåòå òàçè îïöèÿ, âñè÷êè äàííè íà äèñêà âè ùå áúäàò "
-"çàãóáåíè !!\n"
-"\n"
-" * \"Èçòðèé Windows\": Òîâà ïðîñòî ùå èçòðèå âñè÷êî íà äèñêà è ùå çàïî÷íå "
-"íà\n"
-"÷èñòî, ðàçäåëÿíå îò ðàç. Âñÿêàêâè äàííè íà äèñêà âè ùå áúäàò çàãóáåíè.\n"
-"\n"
-"   !! Àêî èçáåðåòå òàçè îïöèÿ, âñè÷êè äàííè íà äèñêà âè ùå áúäàò "
-"çàãóáåíè !!\n"
-"\n"
-" * \"Åêñïåðòåí ðåæèì\": èçáåðåòå òàçè îïöèÿ, àêî èñêàòå ðú÷íî äà ðàçäåëèòå\n"
-"òâúðäèÿ ñè äèñê. Áúäåòå âíèìàòåëíè - òîâà å ìîùåí, íî îïàñåí èçáîð. Ìîæåòå\n"
-"ìíîãî ëåñíî äà çàãóáèòå âñè÷êè äàííè. Òàêà ÷å íå èçáèðàéòå òîâà, àêî íå\n"
-"çíàåòå êàêâî ïðàâèòå."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"À òàêà ! Èíñòàëàöèÿòà å çàâúðøåíà è GNU/Linux ñèñòåìàòà âè å ãîòîâà çà\n"
-"óïîòðåáà. Ïðîñòî öúêíåòå \"OK\", çà äà ðåñòàðòèðàòå ñèñòåìàòà. Ìîæåòå äà\n"
-"ñòàðòèðàòå GNU/Linux èëè Windows, êîåòî ïðåäïî÷èòàòå (àêî èìàòå äâå "
-"ñèñòåìè),\n"
-"âåäíàãà ñëåä êàòî êîìïþòúðúò ñòàðòèðà îòíîâî.\n"
-"\n"
-"Áóòîíà \"Íàïðåäíè÷àâ\" (ñàìî â \"Åêñïåðòåí\") ïîêàçâà îùå äâà áóòîíà çà:\n"
-"\n"
-" * \"ãåíåðèðàíå íà äèñêåòà çà àâòîìàòè÷íà èíñòàëàöèÿ\": çà äà ñúçäàäåòå\n"
-"èíñòàëàöèîííà äèñêåòà, êîÿòî ñëåä òîâà àâòîìàòè÷íî äà èç÷úðøâà öÿëàòà\n"
-"èíñòàëàöèÿ áåç ïîìîùòà íà îïåðàòîð, ïðèëè÷àùà íà èíñòàëàöèÿòà, êîÿòî òîêó-"
-"ùî\n"
-"ñòå èçâúðøèëè.\n"
-"\n"
-"   Îòáåëåæåòå, ÷å äâå ðàçëè÷íè îïöèè ñà äîñòúíè, ÷ðåç öúêàíå íà áóòîíà:\n"
-"\n"
-"    * \"Ïðåèãðàé\". Òîâà å ÷àñòè÷íî àâòîìàòèçèðàíà èíñòàëàöèÿ êàòî ñòúïêèòå\n"
-"ïî ðàçäåëÿíå íà äÿëîâå îñòàâàò èíòåðàêòèâíè.\n"
-"\n"
-"    * \"Àâòîìàòè÷íà\". Íàïúëíî àâòîìàòè÷íà èíñòàëàöèÿ: òâúðäèÿò äèñê ñå\n"
-"ïðåçàïèñâà íàïúëíî, âñÿêàêâè äàííè ñå çàãóáâàò.\n"
-"\n"
-"   Òàçè îñîáåíîñò å ìíîãî óäîáíà, êîãàòî èíñòàëèðàòå ãîëÿì áðîé ïîäîáíî\n"
-"ìàøèíè. Âèæòå ñåêöèÿòà çà àâòîìàòè÷íà èíñòàëàöèÿ íà íàøèÿ web-ñàéò.\n"
-"\n"
-"    * \"Çàïàçè èçáîðà íà ïàêåòè\"(*): çàïàçâà èçáîðà íà ïàêåòè, òàêà êàêòî "
-"å\n"
-"íàïðàâåí ïðåäè. Êîãàòî ïðàâèòå äðóãà èíñòàëàöèÿ, âêàðàéòå äèñêåòàòà â\n"
-"óñòðîéñòâîòî è ïóñíåòå èíñòàëàöèÿòà äà âúðâè ÷ðåç ïîìîùíèÿ åêðàí, êàòî\n"
-"íàòèñíåòå êëàâèøà [F1] è êàòî íàïèøåòå >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Òðÿáâà âè FAT-ôîðìàòèðàíà äèñêåòà (çà äà ñúçäàäåòå òàêâà ïîä GNU/Linux,\n"
-"íàïèøåòå \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Âñè÷êè íîâîäåôèíèðàíè äÿëîâå òðÿáâà äà áúäàò ôîðìàòèðàíè, çà äà ñå "
-"èçïîëçâàò\n"
-"(ôîðìàòèðàíå îçíà÷àâà ñúçäàâàíå íà ôàéëîâà ñèñòåìà).\n"
-"\n"
-"Â òîçè ìîìåíòà ìîæå áè èñêàòå äà ïðåôîðìàòèðàòå íÿêîè ñúùåñòâóâàùè äÿëîâå, "
-"çà\n"
-"äà èçòðèåòå âñÿêàêâè äàííè, êîèòî ñúäúðæàò. Àêî èñêàòå äà ãî íàïðàâèòå, "
-"ìîëÿ\n"
-"èçáåðåòå òÿõ.\n"
-"\n"
-"Ìîëÿ, îòáåëåæåòå, ÷å íå å íåîáõîäèìî äà ïðåôîðìàòèðàòå âñè÷êè äÿëîâå\n"
-"ñúùåñòâóâàùè îòïðåäè. Òðÿáâà äà ïðåôîðìàòèðàòå äÿëîâåòå ñúäúðæàùè\n"
-"îïåðàöèîííàòà ñèñòåìà (êàòî \"/\", \"/usr\" èëè \"/var\"), íî òîâà íå å\n"
-"çàäúëæèòåëíî çà äÿëîâå ñúäúðæàùè äàííè, êîèòî èñêàòå äà çàïàçèòå "
-"(îáèêíîâåíî\n"
-"\"/home\").\n"
-"\n"
-"Ìîëÿ, áúäåòå âíèìàòåëíè, êîãàòî èçáèðàòå äÿëîâåòå. Ñëåä ôîðìàòèðàíå âñè÷êè\n"
-"äàííè íà ïîñî÷åíèòå äÿëîâå ùå áúäàò èçòðèòè è íÿìà äà ìîæåòå äà ãè\n"
-"âúçñòàíîâèòå.\n"
-"\n"
-"Öúêíåòå \"OK\", êîãàòî ñòå ãîòîâè äà ôîðìàòèðàòå äàëîâå.\n"
-"\n"
-"Öúêíåòå \"Îòêàç\", àêî èñêàòå äà èçáåðåòå äðóãè äÿëîâå çà èíñòàëàöèÿ íà "
-"íîâàòà\n"
-"ñè Mandrake Linux îïåðàöèîííà ñèñòåìà.\n"
-"\n"
-"Öúêíåòå \"Íàïðåäíè÷àâ\", àêî èñêàòå äà èçáåðåòå äÿëîâå, êîèòî äà áúäàò\n"
-"ïðîâåðåíè çà ëîøè áëîêîâå îò äèñêà."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Íîâàòà âè Mandrake Linux îïåðàöèîííà ñèñòåìà â ìîìåíòà ñå èíñòàëèðà. Òàçè\n"
-"îïåðàöèÿ áè òðÿáâàëî äà îòíåìå íÿêîëêî ìèíóòè (çàâèñè îò èçáðàíàòà ãîëåìèíà "
-"íà\n"
-"èíñòàëàöèÿòà è îò ñêîðîñòòà íà êîìïþòúðà âè).\n"
-"\n"
-"Ìîëÿ, áúäåòå òúðïåëèâè."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Ïðåäè äà ïðîäúëæèòå, òðÿáâà âíèìàòåëíî äà ïðî÷åòåòå óñëîâèÿòà íà ëèöåíçà. "
-"Òîé\n"
-"ïîêðèâà öÿëàòà Mandrake Linux äèñòðèáóöèÿ, è, àêî íå ñòå ñúãëàñíè ñ âñè÷êè "
-"óñëîâèÿ\n"
-"â íåãî, öúêíåòå íà áóòîíà Îòêàç. Òîâà íåçàáàâíî ùå ïðèêëþ÷è èíñòàëàöèÿòà. Çà "
-"äà\n"
-"ïðîäúëæèòå ñ èíñòàëàöèÿòà, öúêíåòå íà áóòîíà Ïðèåìè."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Â òîçè ìîìåíò, òðÿáâà äà èçáåðåòå íèâîòî íà ñèãóðíîñò, êîåòî èñêàòå çà\n"
-"ìàøèíàòà. Ïî ïðàâèëî, êîëêîòî ïîâå÷å ìàøèíàòà âè å äîñòúïíà è êîëêîòî "
-"ïîâå÷å\n"
-"äàííè ñå ñúõðàíÿâàò íà íåÿ, òîëêîâà ïî-âèñîêî òðÿáâà äà å íèâîòî íà "
-"ñèãóðíîñò.\n"
-"Âúïðåêè òîâà, âèñîêàòà ñèãóðíîñò å çà ñìåòêà íà ëåêîòàòà íà ðàáîòà.\n"
-"Îáúðíåòå ñå êúì ãëàâàòà MSEC íà Reference Manual, çà äà ïîëó÷èòå ïîâå÷å "
-"èíôîðìàöèÿ\n"
-"çà çíà÷åíèåòî íà òåçè íèâà.\n"
-"\n"
-"Àêî íå çíàåòå êàêòî äà èçáåðåòå, èçáåðåòå îïöèÿòà ïî ïîäðàçáèðàíå."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Â òîçè ìîìåíò òðÿáâà äà èçáåðåòå êîé äÿëîâå äà áúäàò èçïîëçâàíè çà "
-"èíñòàëàöèÿ\n"
-"íà âàøàòà Mandrake Linux ñèñòåìà. Àêî äÿëîâåòå âå÷å ñà îïðåäåëåíè, äàëè îò\n"
-"ïðåäèøíà èíñòàëàöèÿ íà GNU/Linux èëè îò äðóã èíñòðóìåíò çà ðàçäåëÿíå, "
-"ìîæåòå\n"
-"äà èçïîëçâàòå ñúùåñòâóâàùèòå äàëîâå.  ïðîòèâåí ñëó÷àé òðÿáâà äà îïðåäåëèòå\n"
-"äÿëîâå îò òâúðäèÿ äèñê.\n"
-"\n"
-"Çà äà ñúçäàäåòå äÿëîâå, òðÿáâà ïúðâî äà èçáåðåòå òâúðä äèñê. Ìîæåòå äà\n"
-"èçáåðåòå äèñê çà ðàçäåëÿíå, êàòî öúêíåòå íà \"hda\" çà ïúðâî IDE "
-"óñòðîéñòâî,\n"
-"\"hdb\" çà âòîðîòî, \"sda\" çà ïúðâî SCSI óñòðîéñòâî è ò.í..\n"
-"\n"
-"Çà äà ðàçäåëèòå èçáðàíèÿ òâúð äèñê, ìîæåòå äà èçïîëçâàòå ñëåäíèÿ îïöèè:\n"
-"\n"
-" * \"Èç÷èñòè âñè÷êî\": òàçè îïöèÿ èçòðèâà âñè÷êè äÿëîâå íà èçáðàíèÿ äèñê.\n"
-"\n"
-" * \"Àâòîìàòè÷íî ñúçäàâàíå\": òàçè îïöèÿ ïîçâîëÿâà àâòîìàòè÷íî äà ñúçàäåòå\n"
-"Ext2 è swap äÿëîâå â ñâîáîäíîòî ïðîñòðàíñòâî íà òâúðäèÿ âè äèñê.\n"
-"\n"
-" * \"Ñïàñè òàáëèöàòà ñ äÿëîâå\": àêî òàáëèöàòà ñ äÿëîâå å ïîâðåäåíà, ìîæåòå\n"
-"äà ñå îïèòàòå äà ÿ âúçñòàíîâèòå ñ òàçè îïöèÿ. Ìîëÿ, áúäåòå âíèìàòåëíè è\n"
-"ïîìíåòå, ÷å ìîæå äà íå ñòàíå.\n"
-"\n"
-" * \"Âúðíè\": èçïîëçâàéòå òàçè îïöèÿ, çà äà îòìåíèòå ïðîìåíèòå.\n"
-"\n"
-" * \"Ïðåçàðåäè\": ìîæåòå äà èçïîëçâàòå òàçè îïöèÿ, àêî èñêàòå äà âúðíåòå\n"
-"âñè÷êè ïðîìåíè è äà çàðåäèòå ïúðâîíà÷àëíàòà òàáëèöà ñ äÿëîâå.\n"
-"\n"
-" * \"Ìàãüîñíèê\": èçïîëçâàéòå òàçè îïöèÿ, àêî èñêàòå äà èçïîëçâàòå "
-"ìàãüîñíèê,\n"
-"äà ðàçäåëè òâúðäèÿ âè äèñê. Òîâà ñå ïðåïîðú÷âà, àêî íÿìàòå äîñòàòú÷íî "
-"ïîçíàíèÿ\n"
-"çà ðàçäåëÿíåòî.\n"
-"\n"
-" * \"Âúçñòàíîâè îò äèñêåòà\": òàçè îïöèÿ ùå âè ïîçâîëè äà âúçñòàíîâèòå "
-"çàïàçåíà\n"
-"ïðåäè òîâà íà äèñêåòà òàáëèöà ñ äÿëîâå.\n"
-"\n"
-" * \"Çàïàçè íà äèñêåòà\": çàïàçâà òàáëèöàòà ñ äÿëîâå íà äèñêåòà. Ïîëåçíî å "
-"ïðè\n"
-"åâåíòóàëíî âúçñòàíîâÿâàíå íà òàáëèöàòà ïðè íåîáõîäèìîñò. Ñèëíî ñå "
-"ïðåïîðú÷âà\n"
-"äà íàïðàâèòå òîâà.\n"
-"\n"
-" * \"Ãîòîâî\": êîãàòî ñòå ñâúðøèëè ñ ðàçäåëÿíåòî íà òâúðäèÿ ñè äèñê, òîâà "
-"ùå\n"
-"çàïèøå ïðîìåíèòå âúðõó äèñêà.\n"
-"\n"
-"Çàáåëåæåòà: ìîæåòå äà äîñòèãíåòå âñÿêà îïöèÿ èçïîëçâàéêè êëàâèàòóðàòà.\n"
-"Ìèíàâàéòå ïðåç äÿëîâåòå èçïîëçâàéêè [Tab} è ñòðåëêèòå íàãîðå/íàäîëó.\n"
-"\n"
-"Êîãàòî å èçáðàí äÿë, ìîæåòå äà èçïîëçâàòå:\n"
-"\n"
-" * Ctrl-c, çà äà ñúçäàäåòå íîâ äÿë (àêî å èçáðàí ïðàçåí äÿë);\n"
-"\n"
-" * Ctrl-d, çà äà èçòðèåòå äÿë;\n"
-"\n"
-" * Ctrl-m, çà äà óñòàíîâèòå òî÷êà íà ìîíòèðàíå.\n"
-"\n"
-"Àêî èíñòàëèòå íà PPC ìàøèíà, ñèãóðíî ùå èñêàòå äà ñúçäàäåòå ìàëúê HFS\n"
-"\"bootstrap\" äÿë îò ïîíå 1 ÌÁ, êîéòî ùå áúäå èçïîëçâàò îò boot loader-úò\n"
-"yaboot. Àêî ñìÿòàòå äà íàïðàâèòå äÿëà ïî-ãîëÿì, íàïðèìåð 50 ÌÁ, ìîæåòå äà "
-"ãî\n"
-"íàìåðèòå çà ïîëåçíî ìÿñòî, êúäåòî äà ñúõðàíÿâàòå íÿêîå ÿäðî èëè image íà\n"
-"ramdisk â ñëó÷àé íà èçâúíðåäíè ñèòóàöèè."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Áåøå çàñå÷åí ïîâå÷å îò åäèí Microsoft Windows äÿë\n"
-"íà òâúðäèÿ âè äèñêà. Èçáåðåòå òîçè, ÷èÿòî äúëæèíà èñêàòå äà ïðîìåíèòå, çà "
-"äà\n"
-"èíñòàëèðàòå Mandrake Linux îïåðàöèîííà ñèñòåìà.\n"
-"\n"
-"\n"
-"Çà èíôîðìàöèÿ, âñåêè äÿë å èçáðîåí êàêòî ñëåäâà: \"Linux èìå\", \"Windows èìå"
-"\", \"Êàïàöèòåò\".\n"
-"\n"
-"\"Linux èìåòî\" ñå êîäèðà êàêòî ñëåäâà: \"òèï íà äèñêà\", \"íîìåð íà äèñêà"
-"\",\n"
-"\"íîìåð íà äÿë\" (íàïðèìåð, \"hda1\").\n"
-"\n"
-"\n"
-"\"Òèïúò íà äèñêà\" ìîæå äà å \"hd\", àêî å IDE òâúðä äèñê, èëè \"sd\", àêî "
-"å\n"
-"SCSI òâúðä äèñê.\n"
-"\n"
-"\n"
-"\"Íîìåðúò íà äèñêà\" âèíàãè å áóêâàòà ñëåä \"hd\" èëè \"sd\". Ïðè IDE "
-"äèñêîâå:\n"
-"\n"
-"   * \"a\" îçíà÷àâà \"master äèñê íà ïúðâèÿ IDE êîíòðîëåð\",\n"
-"   * \"b\" îçíà÷àâà \"slave äèñê íà ïúðâèÿ IDE êîíòðîëåð\",\n"
-"   * \"c\" îçíà÷àâà \"master äèñê íà âòîðèÿ IDE êîíòðîëåð\",\n"
-"   * \"d\" îçíà÷àâà \"slave äèñê íà âòîðèÿ IDE êîíòðîëåð\".\n"
-"\n"
-"\n"
-"Ïðè SCSI óñòðîéñòâà, \"a\" îçíà÷àâà \"ïúðâè òâúðä äèñê\", \"b\" îçíà÷àâà "
-"\"âòîðè òâúðä äèñê\" è ò.í..\n"
-"\n"
-"\"Windows èìåòî\" å áóêâàòà íà òâúðäèÿ âè äèñê ïîä Windows (ïúðâèÿò äèñê "
-"èëè\n"
-"äÿë ñå íàðè÷à \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Ìîëÿ, áúäåòå òúðïåëèâè. Òàçè îïåðàöèÿ ìîæå äà îòíåìå íÿêîëêî ìèíóòè."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ñåãà òðÿáâà äà ïðîâåäå èíñòàëàöèÿ ïî ïîäðàçáèðàíå (\"Ïðåïîðú÷èòåëíà"
-"\")\n"
-"èëè òàêàâà, êúäåòî èìàòå ïî-ãîëÿì êîíòðîë (\"Åêñïåðòíà\"). Âèå ñúùî òàêà\n"
-"ìîæåòå äà èçáåðåòå äà èçâúðøèòå íîâà èíñòàëàöèÿ èëè íàäãðàæäàíå íà\n"
-"ñúùåñòâóâàùà Mandrake Linux ñèñòåìà. Öúêàéêè íà \"Èíñòàëèðàé\" ùå çàòðèå\n"
-"íàïúëíî ñòàðàòà ñèñòåìà. Èçáåðåòå \"Íàäãðàäè\", àêî íàäãðàæäàòå èëè\n"
-"ïîïðàâèòå ñúùåñòâóâàùà ñèñòåìà\n"
-"\n"
-"Ìîëÿ, èçáåðåòå \"Èíñòàëèðàé\", àêî íÿìàòå èíñòàëèðàíà ïðåäèøíà âåðñè íà\n"
-"Mandrake Linux èëè àêî èñêàòå äà èçáèðàòå ìåæäó îïåðàöèîííè ñèñòåìè.\n"
-"\n"
-"Ìîëÿ, èçáåðåòå \"Íàäãðàäè\", àêî èñêàòå äà íàäãðàäèòå èëè ïîïðàâèòå âå÷å\n"
-"èíñòàëèðàíà âåðñèÿ íà Mandrake Linux.\n"
-"\n"
-"Â çàâèñèìîñò îò ïîçíàíèÿòà âè ïî GNU/Linux, ìîëÿ, èçáåðåòå åäèí îò ñëåäíèòå\n"
-"âèäîâå èíñòàëàöèÿ/íàäãðàæäàíå íà âàøàòà Mandrake Linux îïåðàöèîíí ñèñòåìà:\n"
-"\n"
-" * Ïðåïîðú÷èòåëíà: èçáåðåòå òîâà, àêî íèêîãà íå ñòå èñíòàëèðàëè GNU/Linux\n"
-"îïåðàöèîííà ñèñòåìà. Èíñòàëàöèÿòà å ìíîãî ëåñíà è ùå áúäåòå ïîïèòàíè ñàìî\n"
-"íÿêîëêî âúïðîñà.\n"
-"\n"
-" * Åêñïåðòíà:àêî èìàòå äîáðè ïîçíàíèÿ ïî GNU/Linux, ìîæåòå äà èçáåðåòå òîçè\n"
-"èíñòàëàöèîíåí êëàñ. Åêñïåðòíàòà èíñòàëàöèÿ ùå âè ïîçâîëè äà èçâúðøèòå ìíîãî\n"
-"ïîòðåáèòåëñêà èíñòàëàöèÿ. Îòãîâîðèòå íà íÿêîè âúïðîñè ìîæå äà ñà òðúäè, àêî\n"
-"íå ïîçíàâàòå äîáðå GNU/Linux, òàêà ÷å èçáåðåòå òîâà, îñâåí àêî íå çíàåòå\n"
-"êàêâî ïðàâèòå."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Îáèêíîâåíî, DrakX áè òðÿáâàëî äà èçáåðå ïðàâèëíàòà çà âàñ êëàâèàòóðà (â "
-"çàâèñèìîñò\n"
-"îò åçèêà, êîéòî ñòå èçáðàëè) è íÿìà äà ñå íàëîæè äà âèäèòå òàçè ñòúïêà. "
-"Îáà÷å ìîæå äà\n"
-"íÿìàòå êëàâèàòóðà ñúîòâåòñòâàùà òî÷íî íà âàøèÿ åçèê: íàïðèìåð, àêî ñòå "
-"àíãëîãîâîðÿù øâåä,\n"
-"ìîæå áè ùå èñêàòå êëàâèàòóðàòà âè äà áúäå øâåäñêà. Èëè àêî ãîâîðèòå "
-"aíãëèéñêè, íî ñòå\n"
-"â Êâåáåê, ìîæå áè ùå ñòå â ñúùàòà ñèòóàöèÿ. È â äâàòà ñëó÷àÿ, ùå òðÿáâà äà "
-"ñå âúðíåòå\n"
-"êúì òàçè èíñòàëàöèîííà ñòúïêà è äà èçáåðåòå ïðàâèëíàòà êëàâèàòóðà îò "
-"ñïèñúêà.\n"
-"\n"
-"Âñè÷êî, êîåòî òðÿáâà äà íàïðàâèòå, å äà ïîñî÷èòå ïðåäïî÷èòàíàòà êëàâèàòóðíà "
-"íàðåäáà\n"
-"îò ñïèñúêà, êîéòî ùå ñå ïîÿâè ïðåä âàñ.\n"
-"\n"
-"Àêî èìàòå êëàâèàòóðà îò åçèê ðàçëè÷åí îò òîçè èçïîëçâàí ïî ïîäðàçáèðàíå, "
-"öúêíåòå\n"
-"íà áóòîíà \"Íàïðåäíè÷àâ\". Ùå âè áúäå ïðåäîñòàâåí ïúëåí ñïèñúê ñ "
-"ïîääúðæàíèòå êëàâèàòóðè."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Ìîëÿ, öúêíåòå íà ïðåäïî÷èòàíèÿ åçèê íà èíñòàëàöèÿ è ñèñòåìíà óïîòðåáà.\n"
-"\n"
-"Öúêàíåòî íà áóòîíà \"Íàïðåäíè÷àâ\" ùå âè ïîçâîëè äà èçáåðåòå äðóãè åçèöè\n"
-"äà áúäàò èíñòàëèðàíè íà ðàáîòíàòà âè ñòàíöèÿ. Èçáèðàíåòî íà äðóãè åçèöè\n"
-"ùå èíñòàëèðà ôàéëîâå ñïåöèâè÷íè çà åçèöèòå çà ñèñòåìíà äîêóìåíòàöèÿ è\n"
-"ïðèëîæåíèÿ. Íàïðèìåð, àêî èìàòå ïîòðåáèòåëè îò Èçïàíèÿ íà ìàøèíàòà ñè,\n"
-"èçáåðåòå àíãëèéñêè êàòî ãëàâåí åçèê â äúðâîâèäíàòà ôîðìà è â ñåêöèÿ\n"
-"\"Íàïðåäíè÷àâ\" öúêíåòå íà ñèâàòà çâåçäà ñúîòâåòñòâàùà íà\n"
-"\"Èñïàíñêè|Èñïàíèÿ\".\n"
-"Îòáåëåæåòå, ÷å ìîãàò äà áúäàò èíñòàëèðàíè íÿêîëêî åçèêà. Âåäíúæ èçáðàí\n"
-"íÿêàêúâ ëîêàë, öúêíåòå áóòîíà \"OK\", çà äà ïðîäúëæèòå."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Ïî ïîäðàçáèðàíå, DrakX ïðåäïîëàãà ÷å èìàòå äâóáóòîííà ìèøêà è ùå âêëþ÷è\n"
-"ñèìóëèðàíå íà òðè áóòîíà. DrakX àâòîìàòè÷íî ðàçáèðà äàëè å PS/2, ñåðèéíà "
-"èëè\n"
-"USB ìèøêà.\n"
-"\n"
-"Àêî èñêàòå äà îïðåäåëèòå äðóã òèï íà ìèøêàòà, èçáåðåòå ïîäõîäÿù îò ñïèñúêà,\n"
-"êîéòî ùå âè áúäå ïðåäñòàâåí.\n"
-"\n"
-"Àêî èçáåðåòå ìèøêà ðàçëè÷íà îò òàçè ïî ïîäðàçáèðàíå, ùå âè áúäå ïðåäîñòàâåí\n"
-"åêðàí çà ïðîáà. Èçïîëçâàéòå áóòîíèòå è êîëåëöåòî, çà äà ïðîâåðèòå, ÷å\n"
-"íàñòðîéêàòà å äîðà. Àêî ìèøêàòà íå ðàáîòè, êàêòî òðÿáâà, íàòèñíåòå èíòåðâàë\n"
-"èëè ÑÅ ÂÚÐÍÅÒÅ êúì \"Îòêàç\" è èçáåðåòå ïàê."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Ìîëÿ, èçáåðåòå âåðíèÿ ïîðò. Íàïðèìåð, ïîðòúò COM1 ïîä Windows ïîä GNU/Linux\n"
-"ñå íàðè÷à ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (èëè LInux LOader) è Grub ñà bootloader-è: òå ìîãà äà ñòàðòèðàò\n"
-"GNU/Linux èëè êîÿ äà å äðóãà îïåðàöèîííà ñèñòåìà ñúùåñòâóâàùà íà êîìïþòúðà "
-"âè.\n"
-"Îáèêíîâåííî, òåçè äðóãè îïåðàöèîííè ñèñòåìà ñå çàñè÷àò è èíñòàëèðàò\n"
-"ïðàâèëíî. Àêî òîâà íå ñòàâà ïðè âàñ, ìîæåòå äà äîáàâÿòå çàïèñè íà ðúêà â\n"
-"òîçè åêðàí. Ãëåäàéòå äà èçáåðåòå âåðíè ïàðàìåòðè.\n"
-"\n"
-"\n"
-"Ìîæå äà íå èñêàòå äà äàâàòå äîñòúï äî òåçè îïåðàöèîííè ñèñòåìè íà íèêîé,\n"
-"â êîéòî ñëó÷àé ìîæåòå äà èçòðèåòå ñúîòâåòíèòå çàïèñè. Íî â òàêúâ ñëó÷àé,\n"
-"ùå ñå íóæäàåòå îò boot-äèñêåòà, çà äà ãè ñòàðòèðàòå !"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Òðÿáâà äà ïîñî÷èòå êúäå æåëàåòå äà\n"
-"ïîñòàâèòå èíôîðìàöèÿòà, íåîáõîäèìà çà ñòàðòèðàíåòî íà GNU/Linux.\n"
-"\n"
-"Àêî íå ñòå ñèãóðíè â òîâà, êîåòî ïðàâèòå, èçáåðåòå \"Ïúðâèÿ ñåêòîð íà\n"
-"óñòðîéñòâîòî (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Èçáåðåòå òâúðäèÿ äèñê, êîéòî èñêàòå äà èçòðåòå, çà äà\n"
-"èíñòàëèðàì íîâèÿ âè Mandrake Linux äÿë. Âíèìàíèå, âñè÷êè äàííè íà íåãî ùå "
-"áúäàò çàãóáåíè\n"
-"è íÿìà äà ìîãàò äà ñå âúçñòàíîâÿò."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Öúêíåòå \"OK\", àêî èñêàòå äà èçòðèåòå âñè÷êè äàííè è\n"
-"äÿëîâå ñúùåñòâóâàùè íà òîçè òâúðä äèñê. Âíèìàíèå, ñëåä öúêàíå íà \"OK\", "
-"íÿìàäà ìîæåòå äà âúçñòàíîâèòå êàêâèòî è äà áèëî äàííè è äÿëîâå ñúùåñòâóâàùè "
-"íà òîçè òâúðä äèñê,\n"
-"âêëþ÷èòåëíî êàêâèòî è äà å Windows äàííè.\n"
-"\n"
-"Öúêíåòå \"Îòìÿíà\", çà äà îòìåíèòå òàçè îïåðàöèÿ áåç çàãóáà äà äàííèòå è\n"
-"äÿëîâåòå ñúùåñòâóâàùè íà òîçè òâúðä äèñê."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Èçáðàëè ñòå ñëåäíèÿ(òå) ñúðâúð(è): %s\n"
-"\n"
-"\n"
-"Òåçè ñúðâúðè ñå àêòèâèðàò ïî ïîäðàçáèðàíå. Òå íÿìàò èçâåñòíè ïðîáëåìè ñúñ\n"
-"ñèãóðíîñòòà, íî ìîæå äà ñå íàìåðÿò íîâè.  òîçè ñëó÷àé, ùå òðÿáâà äà ñòå\n"
-"ñèãóðíè, ÷å ùå íàäãðàæäàòå âúçìîæíî íàé-áúðçî.\n"
-"\n"
-"\n"
-"Íàèñòèíà ëè èñêàòå äà èíñòàëèðàòå òåçè ñúðâúðè ?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Íå ìîæåòå äà èçïîëçâàòå broadcast áåç NIS äîìåéí"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ñëîæåòå FAT ôîðìàòèðàíà äèñêåòà â óñòðîéñòâî %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Òàçè äèñêåòà íå å ôîðìàòèðàíà íà FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Çà äà èçïîëçâàòå çàïàçåí èçáîð íà ïàêåòè, ñòàðòèðàéòå èíñòàëàöèÿòà ñ ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ãðåøêà ïðè ÷åòåíåòî íà ôàéëà %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"×àñò îò õàðäóåðà íà êîìïþòúðà âè ñå íóæäàå îò ``ñîáñòâåíèòå ñè'' äðàéâåðè, "
-"çà äà ðàáîòè.\n"
-"Ìîæåòå äà íàìåðèòå ïîâå÷å èíôîðìàöèÿ çà òîâà íà: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Òðÿáâà äà èìàòå root-äÿë.\n"
-"Çàòîâà ñúçäàéòå äÿë (èëè öúêíåòå íà ñúùåñòâóâàù).\n"
-"Òîãàâà èçáåðåòå äåéñòâèå ``Ìÿñòî íà ìîíòèðàíå'' è ãî ñëîæåòå `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Òðÿáâà äà èìàòå swap-äÿë"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Íÿìàòå swap-äÿë\n"
-"\n"
-"Äà ïðîäúëæà ëè âñå ïàê ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Òðÿáâà äà èìàòå FAT äÿë ìîíòèðàí â /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Èçïîëçâàé ñâîáîäíîòî ìÿñòî"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Íÿìà äîñòàòú÷íî ìÿñòî çà ñúçäàâàíå íà íîâ äÿë"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Èçïîçâàíå íà ñúùåñòâóâàù äÿë"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Íÿìà äÿë, êîéòî ìîãà äà èçïîëçâàì"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Èçïîëçâàé çà Windows äÿëúò çà loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Êîé äÿë èñêàòå äà èçïîëçâàòå çà Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Èçáåðåòå ãîëåìèíèòå"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ãîëåìèíà íà root-äÿëà â MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ãîëåìèíà íà swap-äÿëà â MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Èçïîëçâàé ñâîáîäíîòî ìÿñòî íà Windows äÿëà"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Êîé äÿë æåëàåòå äà ïðîìåíèòå?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Èç÷èñëÿâàì ãðàíèöèòå íà Windows ôàéëîâàòà ñèñòåìà"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Íå âúçìîæíîñò çà ðàáîòà ñ âàøèÿ FAT äÿë, \n"
-"ïîðàäè ïîëó÷åíàòà ãðåøêà: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Âàøèÿò Windows äÿë å ìíîãî ôðàãìåíòèðàí, ìîëÿ ïúðâî ñòàðòèðàéòå ''defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÂÍÈÌÀÍÈÅ!\n"
-"\n"
-"DrakX òðÿáâà äà ïðåðàçäåëè Âàøèÿ Windows äÿë. Áúäåòå âíèìàòåëíè: òàçè "
-"îïåðàöèÿ å\n"
-"îïàñíà. Àêî îùå íå ñòå ãî íàïðàâèëè, òðÿáâà ïúðâî äà ïóñíåòå scandisk (è\n"
-"åâåíòóàëíî äà èçïîëçâàòå defrag) ïîä Windows âúðõó òîçè äÿë, òîãàâà \n"
-"ïîâòîðåòå èíñòàëàöèàÿòà. Áè áèëî äîáðå äà íàïðàâèòå àðõèâ íà äàííèòå ñè.\n"
-"Êîãàòî ñòå ñèãóðíè, íàòèñíåòå ÎÊ."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Êîëêî èñêàòå äà îñòàâèòå çà windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "äÿë %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Íåóñïåøíî ïðåðàçäåëÿíå íà FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Íÿìà FAT äÿëîâå çà ñìÿíà íà ãîëåìèíàòà èëè çà èçïîëçâàíå êàòî loopback (èëè "
-"íÿìà äîñòàòú÷íî ìÿñòî íà äèñêà)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Èçòðèé öåëèÿ äèñê"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ïðåìàõíè Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "èìàòå ïîâå÷å îò åäèí òâúðäè äèñêîâå, êîé äà èçïîëçâàì çà èíñòàëàöèÿòà?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ÂÑÈ×ÊÈ ñúùåñòâóâàùè äÿëîâå è äàííèòe âúðõó òÿõ íà %s ùå áúäàò çàãóáåíè"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Êëèåíòñêî ðàçäåëÿíå íà äèñêà"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Èçïîëçâàé fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ñåãà ìîæåòå äà ðàçäåëèòå %s.\n"
-"Êîãàòî ñòå ãîòîâè, íå çàáðàâÿéòå äà çàïèøåòå èçïîëçâàéêè `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Íÿìà äîñòàòú÷íî ñâîáîäíî ìÿñòî íà äÿëà"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Íå ìîãà äà íàìåðÿ íèêàêâî ìÿñòî çà èíñòàëàöèÿ"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ïîìîùíèêúò çà ðàçäåëèíå íà äÿëîâå íà DrakX íàìåðè ñëåäíèòå ðåøåíèÿ:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Íåóñïåøíî ðàçäåëÿíå íà: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Âêëþ÷âàì ìðåæàòà"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Èçêëþ÷âàíå íà ìðåæàòà"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ïîÿâè ñå ãðåøêà, íî íå çíàì êàê äà ñå ñïðàâÿ ñ íåÿ äåëèêàòíî.\n"
-"Ìîæåòå äà ïðîäúëæèòå íà ñâîé ðèñê."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äóáëèðàé òî÷êàòà íà ìîíòèðàíå %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Íÿêîè âàæíè ïàêåòè íå ñå èíñòàëèðàõà êàêòî òðÿáâà.\n"
-"Èëè CDROM óñòðîéñòâîòî âè èëè êîìïàêò äèñêà âè å äåôåêòåí.\n"
-"Ïðîâåðåòå êîìïàêò äèñêà íà èíñòàëèðàíèÿ êîìïþòúð èçïîëçâàéêè \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Äîáðå äîøëè â %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Íÿìà ôëîïè óñòðîéñòâî"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Íàâëèçàì â åòàï `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Âàøàòà ñèñòåìà å ñ ìàëêè ðåñóðñè. Ìîæå äà èìàòå ïðîáëåìè ñ èíñòàëèðàíåòî\n"
-"íà Mandrake Linux. Àêî ñå ïîÿâè ïðîáëåì îïèòàéòå ñ òåêñòîâàòà èíñàëàöèÿ. "
-"Çàöåëòà,\n"
-"íàòèñíåòå 'F1', êîãàòî ñòàðòèðàòå îò CDROM è âúâåäåòå 'òåüò'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Êëàñ èíñòàëàöèÿ"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Ìîëÿ, èçáåðåòå åäèí îò ñëåäíèòå êëàñîâå íà èíñòàëàöèÿ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Îáùàòà ãîëåìèíà íà ãðóïèòå, êîèòî ñòå ìàðêèðàëè, å îêîëî %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Àêî èñêàòå äà èíñòàëèðàòå ïî-ìàëêî îò òàçè ãîëåìèíà,\n"
-"èçáåðåòå ïðîöåíò ïàêåòè, êîèòî èñêàòå äà èíñòàëèðàòå.\n"
-"\n"
-"Ïðè íèñúê ïðîöåíò ùå ñå èíñòàëèðàò ñàìî íàé-âàæíèòå ïàêåòè;\n"
-"ïðè 100%% ùå èíñòàëèðàò âñè÷êè ìàðêèðàíè ïàêåòè."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Èìàòå ìÿñòî íà äèñêà ñè ñàìî çà %d%% îò òåçè ïàêåòè.\n"
-"\n"
-"Àêî èñêàòå äà èíñòàëèðàòå ïî-ìàëêî îò òîâà,\n"
-"èçáåðåòå ïðîöåíò îò ïàêåòèòå, êîèòî èíñêàòå äà èíñòàëèðàòå.\n"
-"Ïðè íèñúê ïðîöåíò ùå ñå èíñòàëèðàò ñàìî íàé-âàæíèòå ïàêåòè;\n"
-"ïðè %d%% ùå èíñòàëèðàò âñè÷êè èçáðàíè ïàêåòè."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Ùå èìàòå âúçìîæíîñòòà äà èçáåðåòå ïî-òî÷íî ïðè ñëåäâàùèÿ åòàï."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Ïðîöåíò ïàêåòè çà èíñòàëèðàíå"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Èçáîð íà ãðóïà ïàêåòè"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Èçáèðàíå íà ïàêåòè åäèí ïî åäèí"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Îáùà ãîëåìèíà: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Ëîø ïàêåò"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Èìå: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Âåðñèÿ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ãîëåìèíà: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Âàæíîñò: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Íå ìîæåòå äà îñòàâèòå ïàêåòà íåìàðêèðàí, çàùîòî íÿìàòå ìÿñòî äà ãî "
-"èíñòàëèðàòå"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ñëåäíèòå ïàêåòè ùå áúäàò èíñòàëèðàíè"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ñëåäíèòå ïàêåòè ùå áúäàò ïðåìàõíàòè"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Íå ìîæåòå äà îòáåëåæåòå/äåîòáåëåæåòå òîçè ïàêåò"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Òîâà å íóæåí ïàêåò, íå ìîæå äà áúäå íåìàðêèðàí"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Íå ìîæåòå äà îñòàâèòå òîçè ïàêåò íåìàðêèðàí. Òîé âå÷å å èíñòàëèðàí"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Òîçè ïàêåò òðÿáâà äà áúäå îáíîâåí\n"
-"Ñèãóðíè ëè ñòå, ÷å èñêàòå äà ãî èçêëþ÷èòå ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Íå ìîæåòå äà èçêëþ÷èòå òîçè ïàêåò. Òîé òðÿáâà äà áúäå îáíîâåí"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Ïîêàæè àâòîìàòè÷íî îòáåëÿçàíèòå ïàêåòè"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Èíñòàëèðàé"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Çàðåäè/Çàïàçè íà äèñêåòà"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Îáíîâÿâàíå íà èçáîðà íà ïàêåòè"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Ìèìèíàëíà èíñòàëàöèÿ"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Èíñòàëèðàì"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Ïðåñìÿòàíå"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Îñòàâàùî âðåìå "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Ìîëÿ, èç÷àêàéòå, ïîäãîòâÿíå íà èíñòàëàöèÿòà"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ïàêåòà"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Èíñòàëèðàíå íà ïàêåòà %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Ïðèåìè"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Îòêàæè"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ñìåíåòå CD-ROM !\n"
-"\n"
-"Ìîëÿ, ñëîæåòå CD-ROM îçàãëàâåí \"%s\" â óñòðîéñòâîòî è íàòèñíåòå Ok, êîãàòî "
-"ñòå ãîòîâè.\n"
-"Àêî ãî íÿìàòå, íàòèñíåòå Îòìÿíà, çà äà èçáåãíåòå èíñòàëèðàíåòî îò òîçè CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Äà ïðîäúëæà ëè âñå ïàê ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Ïîÿâè ñå ãðåøêà ïðè ïîðú÷âàíåòî íà ïàêåòèòå:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Ïîÿâè ñå ãðåøêà ïðè èíñòàëèðàíå íà ïàêåòèòå:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Âíèìàíèå\n"
-"\n"
-"Ìîëÿ, ïðî÷åòåòå óñëîâèÿòà ïî-äîëó. Àêî íå ñòå ñúãëàñíè ñ íÿêîå îò òÿõ,\n"
-"íå ìîæåòå äà ïðîäúëæèòå èíñòàëàöèÿòà íà ñëåäâàùèÿ CD íîñèòåë. Íàòèñíåòå\n"
-"'Îòêàæè', çà äà ïðîäúëæèòå èíñòàëàöèÿòà áåç òåçè íîñèòåëè.\n"
-"\n"
-"\n"
-"Íÿêîè êîìïîíåíòè ñúäúðæàùè ñå â ñëåäâàùèÿ CD íîñèòåë íå ñà ðàçïðîñòðàíÿâàò\n"
-"ïîä GPL Ëèöåíçà èëè ïîäîáåí òàêúâ. Âñåêè òàêúâ êîìïîíåíò å ïîä óñëîâèÿòà\n"
-"è ïîëîæåíèÿòà íà ñïåöèôè÷íèÿ ìó ëèöåíç. Ìîëÿ, ïðî÷åòåòå âíèìàòåëíî è èçöÿëî\n"
-"òåçè ñïåöèôè÷íè ëèöåíçè ïðåäè äà èçïîëçâàòå èëè ðàçïðîñòðàíÿâàòå "
-"ñïîìåíàòèòå\n"
-"êîìïîíåíòè.\n"
-"Òàêèâà ëèöåíçè ïî ïðèíöèï ïðåäîòâðàòÿâà ïðåíîñà, êîïèðàíåòî (îñâåí ñ öåë\n"
-"ñúõðàíåíèå), ðàçïðîñòðàíÿâàíåòî, îáðàòíèÿ èíæåíåðèíã, äåàñåìáëèðàíåòî\n"
-"äåêîìïèëàöèÿòà èëè ìîäèôèêàöèÿòà íà êîìïîíåíòèòå.\n"
-"Âñÿêî íàðóøàâàíå íà ñïîãîäáàòà íåçàáàâíî ïðåóñòàíîâÿâà ïðàâàòà âè ïî\n"
-"ñïåöèôè÷íèÿ ëèöåíç. Îñâåí àêî ñïåöèôè÷íèÿ ëèöåíç âè äàâà òàêèâà ïðàâà,\n"
-"îáèêíîâåíî íå ìîæåòå äà èíñòàëèðàòå ïðîãðàìèòå íà ïîâå÷å îò åäíà ñèñòåìà\n"
-"èëè äà ãè ïðèãàæäàòå çà èçïîëçâàíå â ìðåæà. Àêî íå ñòå ñèãóðíè, ìîëÿ\n"
-"ñâúðæåòå ñå ñ äèñòðèáóöèÿ èëè ðåäàêòîðà íà êîìïîíåíà.\n"
-"Ïðåõâúðëÿíåòî íà òðåòè ëèöà èëè êîïèðàíåòî íà âñÿêà êîìïîíåíòà, âêëþ÷èòåëíî\n"
-"íà äîêóìåíòàöèÿòà, îáèêíîâåíî ñà çàáðàíåíè.\n"
-"\n"
-"\n"
-"Âñè÷êè ïðàâà íà êîìïîíåíòèòå îò ñëåäâàùèÿ CD íîñèòåë ïðèíàäëåæàò íà\n"
-"ñúîòâåòíèòå èì àâòîðè è ñà çàùèòåíè êàòî èíòåëåêòóàëíà ñîáñòâåíîñò îò\n"
-"çàêîíèòå çà àâòîðñêè ïðàâà ïðèëîæèìè çà ñîôòóåðíèòå ïðîãðàìè.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ïîÿâè ñå ãðåøêà"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Íàèñòèíà ëè èñêàòå äà ïðåìàõíåòå ïðèíòåðà \"%s\" ?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Ëèöåíçèîíåí äîãîâîð"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Âúâåäåòíèå\n"
-"\n"
-"Îïåðàöèîííàòà ñèñòåìà è ðàçëè÷íèòå êîìïîíåíòè äîñòúïíè â Mandrake Linux "
-"äèñòðèáóöèÿòà ïî-äîëó ùå ñå\n"
-"íàðè÷àò \"Ñîôòóåðåí Ïðîäóêòè\". Ñîôòóåðíèòå Ïðîäóêòè âêëþ÷âàò, íî íå ñå "
-"îãðàíè÷àâàò ñàìî äî, íàáîðà\n"
-"ïðîãðàìè, ìåòîäè, ïðàâèëà è äîêóìåíòàöèÿ îòíàñÿùà ñå äî îïåðàöèîííàòà "
-"ñèñòåìà è ðàçëè÷íèòå\n"
-"êîìïîíåíòè íà Mandrake Linux äèñòðèáóöèÿòà.\n"
-"\n"
-"\n"
-"1. Ëèöåíçèîíåí äîãîâîð\n"
-"\n"
-"Ìîëÿ, ïðî÷åòåòå âíèìàòåëíî òîçè äîêóìåíò. Òîçè äîêóìåíò å ëèöåíçèîíåí "
-"äîãîâîð ìåæäó âàñ è\n"
-"MandrakeSoft S.A., êîéòî ñå îòíàñÿ äî Ñîôòóåðíèÿ Ïðîäóêò. ×ðåç "
-"èíñòàëèðàíåòî, êîïèðàíåòî\n"
-"èëè èçïîëçâàíåòî íà Ñîôòóåðíèÿ Ïðîäóêò ïî êàêúâòî è äà å íà÷èí âèå èçðè÷íî "
-"ïðèåìàòå è\n"
-"íàïúëíî ñå ñúãëàñÿâàòå äà ñïàçâàòå ñðîêîâåòå è óñëîâèÿòà íà òîçè Ëèöåíç.\n"
-"Àêî íå ñå ñúãëàñÿâàòå ñ íÿêîÿ ÷àñò íà Ëèöåíçà, íÿìàòå ïðàâî äà èíñòàëèðàòå, "
-"êîïèðàòå èëè\n"
-"èçïîëçâàòå Ñîôòóåðíèÿ Ïðîäóêò. Îïèòèòå äà ñå èíñòàëèðà, êîïèðà èëè èçïîëçâà "
-"Ñîôòóåðíèÿ Ïðîäóêò\n"
-"íåñúîáðàçíî ñúñ ñðîêîâåòå è óñëîâèÿòà íà òîçè Ëèöåíç ñå çàáðàíÿâàò è òàêèâà "
-"ïðåêðàòÿâàò ïðàâàòà\n"
-"âè ïî òîçè Ëèöåíç. Ïðè ïðåêðàòÿâàíå íà Ëèöåíçà, òðÿáâà íåçàáàâíî äà "
-"óíèæòîæèòå âñè÷êè\n"
-"êîïèÿ íà Ñîôòóåðíèÿ ëèöåíç.\n"
-"\n"
-"\n"
-"2. Îãðàíè÷åíà ãàðàíöèÿ\n"
-"\n"
-"Ñîôòóåðíèòå Ïðîäóêòè è ïðèëîæåíàòà äîêóìåíòàöèÿ ñå ïðåäîñòàâÿòà \"òàêèâà "
-"êàêâèòî ñà\", áåç ãàðàíöèÿ,\n"
-"â ðàìêèòå íà ðàçðåøåíîòî îò çàêîíà.\n"
-"MandrakeSoft S.A., ïðè íèêàêâè îáñòîÿòåëñòâà è â ðàìêèòå íà çàêîíà, íå å "
-"îòãîâîðíà çà êàêâèòî äà e\n"
-"óìèøëåíè, ñëó÷àéíè, ïðåêè èëè êîñòâåíè ùåòè (âêëþ÷èòåëíî çàãóáà íà äàííè çà "
-"ðàáîòà, ïðåêðàòÿâàíå íà,\n"
-"ðàáîòà, ôèíàíñîâè çàãóáè, çàêîííè äàíúöè è íàêàçàíèÿ â ðåçóëòàò íà ñúäåáíî "
-"ðåøåíèå èëè êàêâàòî è äà å\n"
-"äðóãà ïðîèçëèçàùè îò òîâà çàãóáè) ïðîèçòè÷àùè îò óïîòðåáàòà èëè îò "
-"íåâúçìîæíîñòòà äà ñå óïîòðåáè\n"
-"Ñîôòóåðíèÿ Ïðîäóêò, äàæå àêî MandrakeSoft S.A. äà å èçâåñòèëà çà "
-"âúçìîæíîñòòà èëè ñëó÷âàíåòî íà òàêàâà çàãóáà.\n"
-"\n"
-"ÎÃÐÀÍÈ×ÅÍÀ ÎÒÃÎÂÎÐÍÎÑÒ ÑÂÚÐÇÀÍÀ Ñ ÏÐÈÒÅÆÀÂÀÍÅÒÎ ÈËÈ ÈÇÏÎËÇÂÀÍÅÒÎ ÍÀ ÇÀÁÐÀÍÅÍ "
-"ÑÎÔÒÓÅÐ Â ÍßÊÎÈ ÑÒÐÀÍÈ\n"
-"\n"
-"Â ðàìêèòå íà çàêîíà, MandrakeSoft S.A. è íåéíèòå äèñòðèáóòîðè íÿìà ïðè "
-"íèêàêâè óñëîâèÿ äà áúäàò\n"
-"îòãîâîðíè çà êàêâèòî è äà áèëî óìèøëåíè, ñëó÷àéíè, ïðåêè èëè êîñâåíè ùåòè "
-"(âêëþ÷èòåëíî çàãóáà íà äàííè\n"
-"çà ðàáîòà, ïðåêðàòÿâàíå íà, ðàáîòà, ôèíàíñîâè çàãóáè, çàêîííè äàíúöè è "
-"íàêàçàíèÿ â ðåçóëòàò íà\n"
-"ñúäåáíî ðåøåíèå èëè êàêâàòî è äà å äðóãà ïðîèçëèçàùè îò òîâà çàãóáè) "
-"ïðîèçòè÷àùè îò ïðèòåæàâàíåòî\n"
-"è óïîòðåáàòà íà ñîôòóåðíè êîìïîíåíòè è îò èçòåãëÿíåòî íà ñîôòóåðíè "
-"êîìïîíåíòè îò ñàéòîâåòå íà Mandrake Linux,\n"
-"êîèòî ñà çàáðàíåíè â íÿêîè ñòðàíè îò ìåñòíîòî çàêîíîäàòåëñòâî.\n"
-"Òàçè îãðàíè÷åíà îòãîâîðíîñò ñå îòíàñÿ äî, íî íå ñàìî çà, ìîùíèòå "
-"êðèïòîãðàôñêè êîìïîíåíòè âêëþ÷åíè\n"
-"â Ñîôòóåðíèÿ Ïðîäóêò.\n"
-"\n"
-"\n"
-"3. GPL Ëèöåíçà è ïðèäðóæàâàùè ëèöåíçè\n"
-"\n"
-"Ñîôòóåðíèÿò Ïðîäóêò ñå ñúñòîè îò êîìïîíåíòè ñúçäàäåíè îò ðàçëè÷íè õîðà èëè "
-"îðãàíèçàöèè. Ïîâå÷åòî îò\n"
-"òåçè êîìïîíåíòè ñå óïðàâëÿâàò îò ñðîêîâåòå è óñëîâèÿòà íà GNU Îáùèÿ Ïóáëè÷åí "
-"Ëèöåíç, îòòóê íàòàòúê íàðè÷àí\n"
-"\"GPL\", èëè ïîäîáíè íåìó ëèöåíçè. Ïîâå÷åòî îò òåçè ëèöåíçè âè ïîçâîëÿâàò äà "
-"èçïîëçâàòå, êîïèðàòå, èëè\n"
-"ðåäèñòðèáóòèðàòå êîìïîíåíòèòå, êîèòî òå ïîêðèâàò. Ìîëÿ, ïðî÷åòåòå âíèìàòåëíî "
-"ñðîêîâåòå è óñëîâèÿòà íà\n"
-"ëèöåíçèîííèÿ äîãîâîð íà âñåêè êîìïîíåíò ïðåäè äà ãî èçïîëçâàòå. Âñÿêàêâè "
-"âúïðîñè îòíîñíî ëèöåíçà\n"
-"íà êîìïîíåíòèòå áè òðÿáâàëî äà áúäàò íàñî÷åíè êúì ñúîòâåòíèÿ èì àâòîð, à íå "
-"êúì MandrakeSoft.\n"
-"Ïðîãðàìèòå ðàçðàáîòåíè îò MandrakeSoft S.A. ñå óïðàâëÿâàò îò GPL Ëèöåíçà. "
-"Äîêóìåíòàöèÿòà íàïèñàíà\n"
-"îò MandrakeSoft S.A. ñå óïðàâëÿâà îò ñïåöèàëåí ëèöåíç. Ìîëÿ, ïîãëåäíåòå "
-"äîêóìåíòàöèÿòà çà\n"
-"ïîâå÷å èíôîðìàöèÿ.\n"
-"\n"
-"\n"
-"4. Ïðàâà çà Èíòåëåêòóàëíà Ñîáñòâåíîñò\n"
-"\n"
-"Âñè÷êè ïðàâà êúì êîìïîíåíòèòå íà Ñîôòóåðíèÿ Ïðîäóêò ïðèíàäëåæàò íà "
-"ñúîòâåòíèòå èì àâòîðè è ñà\n"
-"çàùèòåíè îò çàêîíèòå çà èíòåëåêòóàëíàòà ñîáñòâåíîñò è çà êîïèðàíå ïðèëàãàíè "
-"çà ñîôòóåðíèòå ïðîãðàìè.\n"
-"MandrakeSoft S.A. çàïàçâà ïðàâîòî ñè äà ìîäèôèöèðà è ïðèãîäÿâà Ñîôòóåðíèÿ "
-"Ïðîäóêò, êàòî öÿëî èëè íà\n"
-"÷àñòè, ïî âñÿêàêúâ íà÷èì î ñ âñÿêàêâè öåëè.\n"
-"\"Mandrake\", \"Mandrake Linux\" è ñâúðçàíèòå ëîãîòà ñà çàïàçåíà ìàðêà íà "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Óïðàâëÿâàùè Çàêîíè\n"
-"\n"
-"Àêî íÿêîÿ ÷àñò îò òîçè äîãîâîð ñå âîäè çàáðàíåíà, íåëåãàëíà èëè íåïðèëîæèìà "
-"ñïîðåä ðåøåíèå íà ñúä,\n"
-"òàçè ÷àñò ñå èçêëþ÷âà îò äîãîâîðà. Âèå îñòàâàòå îãðàíè÷åíè îò îñòàíàëèòå "
-"ïðèëîæèìè ñåêöèè íà äîãîâîðà.\n"
-"Ñðîêîâåòå è óñëîâèÿòà íà òîçè Ëèöåíç ñå óïðàâëÿâàò îò Çàêîíèòå íà Ôðàíöèÿ.\n"
-"Âñè÷êè ñïîðîâå ïî óñëîâèÿòà íà òîçè ëèöåç áè áèëî äîáðå äà ñå îòíåñàò äî "
-"ñúäà. Êàòî êðàéíà ìÿðêà,\n"
-"ñïîðîâåòå ùå áúäàò îòíàñÿíè äî ïîäõîäÿùèÿ ïðàâíè ñúäèëèùà íà Ïàðèæ - "
-"Ôðàíöèÿ.\n"
-"Çà âñÿêàêâè âúïðîñè ïî òîçè äîêóìåíò, ìîëÿ, ñâúðæåòå ñå ñ MandrakeSoft S.A.\n"
-"\n"
-"ÇÀÁÅËÅÆÊÀ: Òîâà å áúëãàðñêè ïðèáëèçèòåëåí ïðåâîä íà äîêóìåíòà, êîåòî "
-"îçíà÷àâà, ÷å òîé\n"
-"âåðîÿòíî íå å äîñòàòú÷íî òî÷åí. Êàòî ïî-äîñòîâåðåí èçòî÷íèê ïîëçâàéòå "
-"íåãîâèÿ îðèãèíàë íà\n"
-"àíãëèéñêè.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Êëàâèàòóðà"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Ìîëÿ, èçáåðåòå ïîäðåæäàíå íà êëàâèàòóðàòà."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Åòî ïúëåí ñïèñúê íà äîñòðúïíèòå êëàâèàòóðè"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Êàêúâ êëàñ èíñòàëàöèÿ æåëàåòå ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Èíñòàëèðàé/Îáíîâè"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Òîâà íîâà èíñòàëàöèÿ ëè å èëè îáíîâÿâàíå ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Ïðåïîðú÷èòåëíà"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Åêñïåðòíà"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Îáíîâÿâàíå"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Îáíîâÿâàíå íà èçáîðà íà ïàêåòè"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Ìîëÿ, èçáåðåòå òèï íà ìèøêàòà."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Ïîðò íà ìèøêàòà"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Ìîëÿ, èçáåðåòå êúì êîé ñåðèåí ïîðò å ñâúðçàíà ìèøêàòà âè."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Èìèòàöèÿ íà áóòîíè"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Èìèòàöèÿ íà 2 áóòîíà"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Èìèòàöèÿ íà 3 áóòîíà"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Íàñòðîéêà íà PCMCIA êàðòèòå ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Íàñòðîéêà íà IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "íÿìà äÿëîâå íà ðàçïîëîæåíèå"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Ïðåòúðñâàíå íà äÿëîâåòå çà íàìèðàíå íà òî÷êè íà ìîíòèðàíå"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Èçáåðåòå ìåñòà çà ìîíòèðàíå"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Íå ìîãà äà ðàç÷åòà òàáëèöàòà íà äÿëîâåòå, ïðåêàëåíî å ïîâðåäåíà çà ìåí :(\n"
-"Ìîãà äà ñå îïèòàì äà èç÷èñòÿ ëîøèòå äÿëîâå (ÂÑÈ×ÊÈ ÄÀÍÍÈ ùå áúäàò "
-"çàãóáåíè!).\n"
-"Äðóãî ðåøåíèå å äà çàáðàíèòå íà DrakX ïîïðàâÿ òàáëèöàòà ñ äÿëîâå.\n"
-"(ãðåøêàòà å %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake íå óñïÿ äà ðàç÷åòå ïðàâèëíî òàáëèöàòà íà äÿëîâåòå.\n"
-"Ïðîäúëæèòå íà ñîáñòâåí ðèñê !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Íÿìà ñâîáîäíî ìÿñòî çà 1 ÌÁ ñòàðòèðàùî ïîëå ! Èíñòàëàöèÿòà ùå ïðîäúëæè, íî, "
-"çà äà ñòàðòèðàòå ñèñòåìàòà ñè, ùå òðÿáâà äà ñúçäàäåòå ñòàðòèðàùî ïîëå â "
-"DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Íå å íàìåðåí ãëàâåí äÿë çà íàäãðàæäàíå"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root äÿë"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Êîé å root-äÿëúò (/) íà ñèñòåìàòà âè ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Íàëàãà ñå ðà ðåñòàðòèðàòå, ïðåäè ìîäèôèêàöèèòå äà ïðåäèçâèêàò åôåêò"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Èçáåðåòå äÿëîâåòå, êîèòî èñêàòå äà ôîðìàòèðàòå"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ïðîâåðêà çà ëîøè ñåêòîðè ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ôîðìàòèðàíå íà äÿëowe"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Ñúçäàâàíå è ôîðìàòèðàíå íà ôàéëà %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Íÿìà äîñòàòú÷íî swap çà ïðèêëþ÷âàíå íà èíñòàëàöèÿòà, ìîëÿ äîáàâåòå ìàëêî"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Òúðñÿ íàëè÷íè ïàêåòè"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Òúðñÿ ïàêåòè çà îáíîâÿâàíå"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ñèñòåìàòà âè íÿìà äîñòàòú÷íî ìÿñòî çà èíñòàëàöèÿ èëè îáíîâÿâàíå (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Ïúëíà (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Ìèíèìàëíà (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ïðåïîðú÷èòåëíà (%dMb)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Ìîæå èçáåðåòå çàðåæäàíå èëè çàïèñ íà èçáîðà íà ïàêåòè íà ôëîïè.\n"
-"Ôîðìàòúò å ñúùèÿò êàòî auto_install ãåíåðèðàíèòå äèñêåòè."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Çàðåäè îò äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Çàðåæäàíå îò äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Èçáîð íà ïàêåòè"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Ñëîæåòå äèñêåòà ñúäúðæàùà èçáîð íà ïàêåòè"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Çàïàçè íà äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Èçáðàíàòà ãîëåìèíà å ïî-ãîëÿìà îò äîñòúïíîòî ïðîñòðàíñòâî"
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Èçáåðåòå ïàêåòè çà èíñòàëèðàíå"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Åäèí ìîìåíò"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Àêî èìàòå âñè÷êè CD-òà îò ñïèñúêà ïî-ãîðå, íàòèñíåòå Ok.\n"
-"Àêî íÿìàòå íèòî åäíî îò òåçè CD-òà, íàòèñíåòå Îòìÿíà.\n"
-"Àêî âè ëèïñâàò íÿêîè CD-òà, ìàõíåòå ãè, è íàòèñíåòå Ok. "
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM îçàãëàâåí \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ïîäãîòâÿì èíñòàëàöèÿòà"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Èíñòàëèðàì ïàêåò %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Ñëåä èíñòàëàöèîííà íàñòðîéêà"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ñëîæåòå ñòàðòèðàùàòà äèñêåòà â óñòðîéñòâî %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ñëîæåòå äèñêåòà çà îáíîâÿâàíå íà ìîäóëè â óñòðîéñòâî %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ñåãà èìàòå âúçìîæíîñòòà äà ñâàëèòå ñîôòóåð ñ öåë êîäèðàíå.\n"
-"\n"
-"ÂÍÈÌÀÍÈÅ:\n"
-"\n"
-"Ïîðàäè ðàçëè÷íèòå èçèñêâàíèÿ ïîñòàâåíè îò òîçè ñîôòóåð è îò ìíîãî\n"
-"þðèñäèêöèè, êëèåíòèòå è/èëè êðàéíèòå êëèåíòè íà òîçè ñîôòóåð òðÿáâà\n"
-"äà áúäàò ñèãóðíè, ÷å íîðìàòèâíàòà áàçà èì ïîçâîëÿâà ñâàëÿíåòî, ïðîäàæáàòà\n"
-"è/èëè èçïîëçâàíåòî íà òîçè ñîôòóåð.\n"
-"\n"
-"Â äîïúëíåíèå êëèåíòúò è/èëè êðàéíèÿ ïîòðåáèòåë òðÿáâà äà âíèìàâà ñ òîâà\n"
-"äàíåáè äà íàðóøè ÷àñò îò íîðìàòèâíàòà áàçà. Êëèåíòúò è/èëè êðàéíèÿò\n"
-"ïîòðåáèòåë òðÿáâà äà óâàæàâà ïðèëåæàùèòå çàêîíè, òúé êàòî òîé ùå ïîíåñå\n"
-"ñàíêöèèòå.\n"
-" íèêàêúâ ñëó÷àé Mandrakesoft èëè íåãîâèòå ïðîèçâîäèòåëè è/èëè\n"
-"ñïîìîùåñòâóâàòåëèòå ìó íå íîñÿò íèêàêâà îòãîâîðíîñò çà êàêâèòî è äà å\n"
-"ïðåêè, êîñâåíè èëè ñëó÷àéíè âðåäè (âêëþ÷èòåëíî, íî íå ñàìî îãðàíè÷åíè â\n"
-"çàãóáàòà íà ïîëçè, ïðåêúñâàíå íà áèçíåñ, çàãóáà íà êîìåðñèàëíè äàííè è\n"
-"äðóãè ïàðè÷íè çàãóáè, è åâåíòóàëíè îòãîâîðíîñòè è îáåùåòåíèÿ çà ïëàùàíå\n"
-"ïî ñúäåáíè ðåøåíèÿ) ïðåäèçâèêàíè îò èçïîëçâàíåòî, ïîñòàâÿíåòî èëè äîðè\n"
-"ñâàëÿíåòî íà òîçè ñîôòóåð, äî êîéòî êëèåíòúò è/èëè êðàéíèÿò ïîòðåáèòåë\n"
-"åâåíòóàëíî ìîæå äà èìà äîñòúï ñëåä ñúãëàñèåòî ñ òîâà ñïîðàçóìåíèå.\n"
-"\n"
-"Çà âñÿêàêâè âúïðîñè ïî òîâà ñïîðàçóìåíèå, ìîëÿ, ñâúðæåòå ñå ñ \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Ñâúðçâàíå ñ îãëåäàëíèÿ ñúðâúð çà ïîëó÷àâàíå íà ñïèñúêà ñ ïàêåòèòå"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Èçáåðåòå îãëåäàëåí ñúðâúð,îò êîéòî äà ïîëó÷èòå ïàêåòèòå"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ñâúðçâàíå ñ îãëåäàëíèÿ ñúðâúð çà ïîëó÷àâàíå íà ñïèñúêà ñ ïàêåòèòå"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Êîÿ å âðåìåâàòà âè çîíà ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Õàäðóåðíèÿò âè ÷àñîâíèê å íàñòðîåí ïî GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Àâòîìàòè÷íà ñèíõðîíèçàöèÿ íà âðåìåòî (èçïîëçâà NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ñúðâúð"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Îòäàëå÷åí CUPS ñúðâúð"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Íÿìà ïðèíòåð"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Èìàòå ëè äðóã(è) ?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Îáîáùåíèå"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Ìèøêà"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "×àñîâà çîíà"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Ïðèíòåð"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN êàðòà"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Çâóêîâà êàðòà"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV êàðòà"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Ëîêàëíè ôàéëîâå"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Âúâåäåòå ïàðîëà çà root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Áåç ïàðîëà"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ïàðîëàòà å ïðåêàëåíî ïðîñòà (òðÿáâà äà áúäå äúëãà ïîíå %d ñèìâîëà)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Èäåíòèôèêàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP àóòîðèçàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Áàçîâ dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP ñúðâúð"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS àóòîðèçàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS äîìåéí"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ñúðâúð"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Êëèåíòñêÿò bootdisk å íåîáõîäèì çà ñòàðòèðàíå â Linux ñèñòåìàòà âè "
-"íåçàâèñèìî\n"
-"îò îáèêíîâåíèÿ bootloader. Òîâà å ïîëåçíî, àêî íå èñêàòå äà èíñòàëèðàòå\n"
-"SILO íà ñèñòåìàòà ñè, àêî íÿêîÿ äðóãà îïåðàöèîííà ñèñòåìà ìàõíå SILO\n"
-"èëè àêî SILO íå ðàáîòè ñ õàðäóåðíàòà âè íàñòðîéêà. Êëèåíòñêèÿò bootdisk\n"
-"ìîæå äà áúäå èçïîëçâàí ñúñ\n"
-"ñïàñèòåëíèÿò îáðàç íà Mandrake, óëåñíÿâàêè âúçñòàíîâÿâàíåòî ïðè ðåäêè\n"
-"ñëó÷àè íà ñðèâ.\n"
-"\n"
-"Àêî èñêàòå äà ñúçäàäåòå bootdisk çà âàøàòà ñèñòåìà, ïîñòàâåòå äèñêåòà â\n"
-"ïúðâîòî óñòðîéñòâî è íàòèñíåòå \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ïúðâî ôëîïè óñòðîéñòâî"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Âòîðî ôëîïè óñòðîéñòâî"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ïðåñêî÷è"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Êëèåíòñêè bootdisk å íåîáõîäèì çà ñòàðòèðàíå â Linux ñèñòåìàòà âè "
-"íåçàâèñèìî\n"
-"îò îáèêíîâåíàòà çàðåæäàùà ïðîãðàìà. Òîâà å ïîëåçíî, àêî íå èñêàòå äà "
-"èíñòàëèðàòå\n"
-"LILO (èëè GRUB) íà ñèñòåìàòà ñè èëè àêî íÿêîÿ äðóãà îïåðàöèîííà ñèñòåìà "
-"ìàõíå LILO èëè LILO íå\n"
-"ðàáîòè ñ õàðäóåðíàòà âè íàñòðîéêà. Bootdisk-úò ìîæå äà áúäå èçïîëçâàí ñúñ\n"
-"ñïàñèòåëíàòà äèñêåòà íà Mandrake, óëåñíÿâàùà âúçñòàíîâÿâàíåòî ïðè ðåäêè\n"
-"ñëó÷àè íà ñðèâ. Èñêàòå ëè äà ñúçäàì bootdisk çà ñèñòåìàòà âè ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ñúæàëÿâàì íÿìà ôëîïè"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Èçáåðåòå ôëîïè äðàéâ,êúäåòî äà íàïðàâèòå ñòàðòèðàùà äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ñëîæåòå äèñêåòà â óñòðîéñòâî %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Ñúçäàâàíå íà ñòàðòèðàùà äèñêåòà"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ïîäãîòîâêà íà bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Èçãëåæäà èìàòå ñòàðîâðåìñêà èëè íåèçâåñòíà\n"
-"ìàøèíà, íà êîÿòî yaboot íÿìà äà ïðîðàáîòè.\n"
-"Èíñòàëàöèÿòà ùå ïðîäúëæè, íî ùå òðÿáâà\n"
-"äà èïîëçâàòå BootX, çà äà ñòàðòèðàòå ìàøèíàòà ñè"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Èñêàòå ëè äà èçïîëçâàòå aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ãðåøêà ïðè èíñòàëèðàíå íà aboot, \n"
-"äà ñå îïèòàì ëè äà ïðîäúëæà èíñòàëàöèÿòà äîðè, àêî òîâà óíèæòîæè ïúðâèÿ äÿë ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Èíñòàëèðàíå íà bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Èíñòàëàöèÿòà íà bootloader ïðîâàëåíà. Ïîÿâè ñå ñëåäíàòà ãðåøêà:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ìîæå áè ñå íóæäàåòå äà ïðîìåíèòå Open Firmware ñòàðòîâîòî óñòðîéñòâî,\n"
-" çà äà ïóñíåòå çàðåæäàùàòà ïðîãðàìà. Àêî íå âèæäàòå ïîäñêàçêàòà è ïðè\n"
-" ðåñòàðòèðàíå, çàäðúæòå Command-Option-O-F ïðè ðåñòàðòèðàíå è âúâåäåòå:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Ñëåä êîåòî íàïèøåòå: shut-down\n"
-"Ïðè ñëåäâàùîòî ðåñòàðòèðàíå áè òðÿáâàëî äà âèäåòå ïîäñêàçêàòà."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ñëîæåòå ïðàçíà äèñêåòà â óñòðîéñòâî %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Ïîäãîòâÿì äèñêåòà ñ àâòîìàòè÷íà èíñòàëàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Íÿêîè åòàïè íå ñà çàâúðøåíè.\n"
-"\n"
-"Íàèñòèíà ëè èñêàòå äà èçëåçåòå ñåãà ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Ïîçäðàâëåíèÿ, èíñòàëàöèÿòà å ïðåêëþ÷åíà.\n"
-"Ïðåìàõíåòå ñòàðòîâîòî óñòðîéñòâî è íàòèñåíå Enter çà äà ðåñòàðòèðàéòå.\n"
-"\n"
-"\n"
-"Çà èíôîðìàöèÿ îòíîñíî ïîïðàâêè, íà òàçè âåðñèÿ íà Mandrake Linux,\n"
-"ñå êîíñóëòèðàéòå ñ Errata, íà àäðåñ : \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Èíôîðìàöèÿ çà íàñòðîéâàíå íà ñèñòåìàòà âè ìîæåòå äà íàìåðèòå â\n"
-"ñëåäèíñòàëàöèîííàòà ãëàâà îò Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Ïîäãîòâè äèñêåòà çà àâòîìàòè÷íà èíñòàëàöèÿ"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Àâòîìàòè÷íàòà èíñòàëàöèÿ ìîæå äà áúäå íàïúëíî àâòîìàòèçèðàíà,\n"
-"â òàêúâ ñëó÷àé ùå ïðåâçåìå òâúðäèÿ âè äèñê !!!\n"
-"(òîâà å çà ïðåäíàçíà÷åíî çà èíñòàëèðàíå íà äðóãà ìàøèíà).\n"
-"\n"
-"Ìîæå áè èñêàòå äà ïîâòîðèòå èíñòàëàöèÿòà.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Àâòîìàòèçèðàí"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ïîâòîðè"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Çàïàçè èçáîð íà ïàêåòè"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Èíñòàëàöèÿ íà Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ìåæäó åëåìåíòèòå  | <Space> èçáèðà  | <F12> ñëåäâàù åêðàí"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ëèïñâà kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Èçáåðåòå ôàéë"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Íàïðåäíè÷àâ"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Ìîëÿ èç÷àêàéòå"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Èíôîðìàöèÿ"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ðàçøèðè äúðâîòî"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Èç÷èñòè äúðâîòî"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Ïðåâêëþ÷âàíå ìåæäó íîðìàëíî è ñîðòèðàíå ïî ãðóïè"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Ëîø èçáîð, îïèòàéòå îòíîâî\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Âàøèÿò èçáîð ? (ïî ïîäðàçáèðàíå å %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Âàøèÿò èçáîð ? (ïî ïîäðàçáèðàíå å %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Îïöèè: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Èñêàòå ëè äà èçïîëçâàòå aboot ?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Âàøèÿò èçáîð ? (ïî ïîäðàçáèðàíå å %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "×åøêà (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Íåìñêà"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Äâîðàê"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Èñïàíñêà"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Ôèíëàíäñêà"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ôðåíñêà"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Íîðâåæêà"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Ïîëñêà"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ðóñêà"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Øâåäñêà"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UÊ êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Àëáàíñêà"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Àðìåíñêà (ñòàðà)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Àðìåíñêà (ïèøåùà ìàøèíà)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Àðìåíñêà (ôîíåòè÷åí)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Àçåðáàéäæàíñêà (ëàòèíèöà)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Áåëãèéñêà"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Àðìåíñêà (ôîíåòè÷åí)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Áúëãàðñêà"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Áðàçèëñêà (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Áåëàðóñêà"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Øâåéöàðñêà (íåìñêà íàðåäáà)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Øâåéöàðñêà (ôðåíñêè íàðåäáà)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "×åøêà (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Íåìñêà (áåç íåðàáîòåùè êëàâèøè)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Äàòñêà"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Äâîðàê (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Äâîðàê (Íîðâåæêà)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Äâîðàê (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Åñòîíñêà"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ãðóçèíñêà (\"Ðóñêà\" íàðåäáà)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ãðóçèíñêà (\"Ëàòèíñêà\" íàðåäáà)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Ãðúöêà"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Óíãàðñêà"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Õúðâàòñêà"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Èçðàåëñêà"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Èçðàåëñêà (ôîíåòè÷íà)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Èðàíñêà"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Èñëàíäñêà"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Èòàëèàíñêà"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ßïîíñêà 106 êëàâèøà"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Êîðåéñêà êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Ëàòèíîàìåðèêàíñêà"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëèòâèéñêà AZERTY (ñòàðà)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëèòâèéñêà AZERTY (íîâà)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëèòâèéñêà \"÷èñëîâà ðåäèöà\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëèòâèéñêà \"ôîíåòè÷åí\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Ëàòâèéñêà"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Ìàêåäîíñêà"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Õîëàíäñêà"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Ïîëñêà (QWERTY íàðåäáà)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Ïîëñêà (QWERTZ íàðåäáà)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Ïîðòóãàëñêà"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Êàíàäñêà (Êâåáåê)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Ðóìúíñêà (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Ðóìúíñêà (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ðóñêà (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Ñëîâåíñêà"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Ñëîâàøêà (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Ñëîâàøêà (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Ñðúáñêà (êèðèëèöà)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Òàáëèöà"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Òàéâàíñêà êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Òàäæèêèñòàíñêà êëàâèàòóðà"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Òóðñêà (òðàäèöèîíåí \"F\" ìîäåë)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Òóðñêà (ìîäåðåí \"Q\" ìîäåë)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Óêðàèíñêà"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US êëàâèàòóðà (ìåæäóíàðîäíà)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Âèåòíàìñêà \"÷èñëîâà ðåäèöà\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Þãîñëàâñêà (ëàòèíèöà)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "\"Îìàãüîñàí êðúã\" îò ìîíòèðàíèÿ: %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Ïúðâî ïðåìàõíè ëîãè÷íèòå äÿëîâî\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Ìèøêà íà Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Îáèêíîâåííà PS2 ìèøêà"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington THinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genuis NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 áóòîí"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Îáèêíîâåííà 2-áóòîííà ìèøêà"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Îáù"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wheel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "ñåðèéíà"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Îáèêíîâåííà 3-áóòîííà ìèøêà"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ñåðèéíà, îò ñòàðèÿ òèï C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "BUS ìèøêà"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 áóòîíà"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 áóòîíà"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "íÿìà"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Áåç ìèøêà"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Ìîëÿ, ïðîáâàéòå ìèøêàòà ñè"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Çà äà àêòèâèðàòå ìèøêàòà ñè,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÁÓÒÍÅÒÅ ÒÎÏ×ÅÒÎ !"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Çàâúðøè"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Ñëåäâàù ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Ïðåäèøåí"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Âñè÷êî ïðàâèëíî ëè å ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ñâúðæè ñå êúì Èíòåðíåò"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Íàé-÷åñòèÿ íà÷èí çà ñâúðçâàíå ÷ðåç ADSL å PPPOE.\n"
-"Íÿêîè âðúçêè èçïîëçâàò PPTP, à maëêî èçïîëçâàò DHCP.\n"
-"Àêî íå çíàåòå, èçáåðåòå 'èçïîëçâàé PPPOE'."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "èçïîëçâàé DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "èçïîëçâàé PPPOE"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "èçïîëçâàé PPPTP"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Êàêúâ DHCP êëèåíò èñêàòå äà èçïîëçâàòå ?\n"
-"Ïî ïîäðàçáèðàíå å dhcpcd ?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Íå áåøå íàìåðåí ìðåæîâ àäàïòåð â ñèñòåìàòà âè.\n"
-"Íå ìîæåòå äà íàñòðîèòå òàêúâ âèä âðúçêà."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Èçáåðåòå ìðåæîâ èíòåðôåéñ"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Ìîëÿ, èçáåðåòå êîé ìðåæîâ àäàïòåð äà èçïîëçâàì çà âðúçêà êúì Èíòåðíåò"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "íå å îòêðèòà ìðåæîâà êàðòà"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Íàñòîéêà íà ìðåæàòà"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Ìîëÿ, âúâåäåòå èìå íà õîñò àêî ãî çíàåòå.\n"
-"Íÿêîé DHCP ñúðâúðè èçèñêâàò òîâà çà äà ðàáîòÿò.\n"
-"Host èìåòî òðÿáâà äà áóäå íàïúëíî êâàëèôèöèðàíî èìå,\n"
-"êàòî ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Èìå íà õîñò:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Ìàãüîñíèê çà íàñòðîéêà íà ìðåæàòà"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Âúíøåí ISDN ìîäåì"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Âúòðåøíà ISDN êàðòà"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Êàêúâ å òèïúò íà ISDN âðúçêàòà ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Êîÿ ISDN íàñòðîéêà ïðåäïî÷èòàòå ?\n"
-"\n"
-"* Ñòàðàòà íàñòðîéêà èçïîëçâà isdn4net. Ñúäúðæà ìîùíè èíñòðóìåíòè\n"
-"  íî å êàïðèçíà çà íàñòðîéêà è íå å ñòàíäàðòíà.\n"
-"\n"
-"* Íîâàòà íàñòðîéêà å ïî-ëåñíà çà ðàçáèðàíå, ïî ñòàíäàðòíà,\n"
-"  íî ñ ïî-ìàëêî èíñòðóìåíòè.\n"
-"\n"
-"Ïðåïîðú÷âàìå âè îëåêîòåíàòà íàñòðîéêà.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Íîâà íàñòðîéêà (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ñòàðà íàñòðîéêà (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Íàñòðîéêà íà IDSN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Ïîñî÷åòå äîñòàâ÷èêà ñè.\n"
-" Àêî íå å â ñïèñúêà, èçáåðåòå Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Ïðîòîêîë Åâðîïà"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Ïðîòîêîë Åâðîïà (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Ïðîòîêîë çà îñòàíàëèÿ ñâÿò"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ïðîòîêîë çà îñòàíàëèÿ ñâÿò\n"
-" áåç D-Êàíàë (íàåòà ëèíèÿ)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Êàêúâ ïðîòîêîë æåëàåòå äà ïðîìåíèòå ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Êàêúâ òèï êàðòà èìàòå ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Íå çíàì"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Àêî èìàòå ISA êàðòà, ñòîéíîñòèòå íà ñëåäâàùèÿ åêðàí òðÿáâà äà ñà âåðíè.\n"
-"\n"
-"Àêî èìàòå PCMCIA êàðòà, ùå òðÿáâà äà çíàåòå IRC è IO íà êàðòàòà ñè.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Îòêàç"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Íàòàòúê"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Êîÿ å ISDN êàðòàòà âè ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Îòêðèòà å ISDN PCI êàðòà, íî ñ íåïîçíàò òèï. Ìîëÿ èçáåðåòå íÿêîÿ PCI êàðòà "
-"îò ñëåäâàùèÿò åêðàí."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Íå å íàìåðåíà ISDN PCI êàðòà. Ìîëÿ èçáåðåòå îò ñëåäâàùèÿò åêðàí."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ìîëÿ, èçáåðåòå ñåðèåí ïîðò êúì êîéòî ñâúðçàí ìîäåìúò âè."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Îïöèè çà èçáèðàíå ïî òåëåôîí"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Èìå íà âðúçêàòà"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Òåëåôîíåí íîìåð"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Ïîòðåáèòåëñêî èìå"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Áàçèðàíà íà ñêðèïò"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Áàçèðàíà íà òåðìèíàë"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Èìå íà äîìåéíà"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Ïúðâè DNS ñúðâúð (ïî èçáîð)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Âòîðè DNS ñúðâúð (ïî èçáîð)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìîæåòå äà ñå îòâúðæåòå èëè äà ïðåíàñòðîèòå âðúçêàòà."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Ìîæåòå äà ïðåíàñòðîèòå âðúçêàòà."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Â ìîìåíòà ñòå ñâúðçàíè êúì Èíòåðíåò"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìîæåòå äà ñå ñâúðæåòå êúì Èíòåðíåò èëè äà ïðåíàñòðîèòå âðúçêàòà."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Â ìîìåíòà íå ñòå ñâúðçàíè êúì Èíòåðíåò"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Ñâúðæè"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Îòâúðæè"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Â ìîìåíòà íàñòðîéâàì ìðåæàòà"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Èíòåðíåò âðúçêà è íàñòðîéêà"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ñåãà ùå íàñòðîèì %s âðúçêàòà."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ñåãà ùå íàñòðîèì %s âðúçêàòà.\n"
-"\n"
-"Íàòèñíåòå OK, çà äà ïðîäúëæèòå."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Íàñòðîéêà íà ìðåæàòà"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Òúé êàòî ïðàâèòå ìðåæîâà èíñòàëàöèÿ, ìðåæàòà âè âå÷å å íàñòðîåíà.\n"
-"Öúêíåòå Ok, çà äà çàïàçèòå íàñòðîéêàòà, èëè Îòìÿíà, çà äà ïðåíàñòîèòå "
-"Èíòåðíåò è ìðåæîâàòà ñè âðúçêà.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Äîáðå äîøëè ïðè ìàãüîñíèêà çà íàñòðîéêà íà ìðåæà\n"
-"\n"
-"Âèå ñòå íà ïúò äà íàñòðîèòå Èíòåðíåò/ìðåæîâàòà ñè âðúçêà.\n"
-"Àêî íå èñêàòå äà èçïîëçâàòå àâòîìàòè÷íî çàñè÷àíå, èçêëþ÷åòå êóòèéêàòà.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Èçáåðåòå ïðîôèë çà íàñòðîéêà"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Èçïîëçâàé àâòîìàòè÷íî çàñè÷àíå"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Îòêðèâàíå íà óñòðîéñòâà ..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Îáèêíîâåíà ìîäåìíà âðúçêà"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "çàñå÷åí íà ïîðò %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN âðúçêà"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "çàñå÷åíà %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL âðúçêà"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "çàñå÷åí íà èíòåðôåéñ %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Êàáåëíà âðúçêà"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "çàñå÷åíà å êàáåëíà âðúçêà"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN âðúçêà"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet êàðòè çàñå÷åíè"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Èçáåðåòå âðúçêàòà, êîéòî èñêàòå äà èçïîëçâàòå"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Íàñòðîèëè ñòå íÿêîëêî íà÷èíà çà âðúçêà êúì Èíòåðíåò.\n"
-"Èçáåðåòå òîçè, êîéòî èñêàòå äà èçïîëçâàòå.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Èíòåðíåò âðúçêà"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Èñêàòå ëè äà ñòàðòèðàòå âðúçêàòà ñè ïðè çàðåæäàíå ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Íàñòðîéêà íà ìðåæàòà"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Ìðåæàòà òðÿáâà äà áúäå ðåñòàðòèðàíà"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Èçíèêíà ïðîáëåì ïðè ðåñòàðòèðàíåòî íà ìðåæàòà:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Ïîçäðàâëåíèÿ, ìðåæîâàòå è Èíòåðíåò íàñòðîéêàòà å çàâúðøåíà.\n"
-"\n"
-"Íàñòðîéêèòå ùå áúäàò ïðèëîæåíè êúì ñèñòåìàòà âè.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Ñëåä êàòî ñòàíå òîâà, ïðåïîðú÷âàìå âè äà ðåñòàðòèðàòå X\n"
-"ñðåäàòà ñè, çà äà èçáåãíåòå ïðîáëåìè ñúñ ñìÿíàòà èìåòî íà õîñòà."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ÂÍÈÌÀÍÈÅ: Òîâà óñòðîéñòâî âå÷å å íàñòðîåíî äà ñå ñâúðçâà êúì Èíòåðíåò.\n"
-"Ïðîñòî ïðèåìåòå, çà äà îñòàâèòå óñòðîéñòâîòî íàñòðîåíî.\n"
-"Ïîïðàâêàòà íà ïîëåòàòà ïî-äîëó ùå ïðåçàïèøå òàçè íàñòðîéêà."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Ìîëÿ, âúâåäåòå IP íàñòðîéêèòå çà òàçè ìàøèíà.\n"
-"Âñÿêî óñòðîéñòâî òðÿáâà äà áúäå âúâåäåíî êàòî IP àäðåñ\n"
-"ñ òî÷êîâî-äåñåòè÷íî îçíà÷åíèå (íàïðèìåð, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Íàñòðîéêà íà ìðåæîâîòî óñòðîéñòâî %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (äðàéâåð %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP àäðåñ"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Ìðåæîâà ìàñêà"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Àâòîìàòè÷åí IP àäðåñ"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP àäðåñúò òðÿáâà äà áúäå âúâ ôîðìàò 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Ìîëÿ, âúâåäåòå host name çà ìàøèíàòà.\n"
-"Host èìåòî òðÿáâà äà áóäå íàïúëíî êâàëèôèöèðàíî èìå,\n"
-"êàòî ``mybox.mylab.myco.com''.\n"
-"Ìîæåòå ñúùî äà âúâåäåòå IP àäðåñà íà Âàøèÿ gateway, àêî èìàòå òàêúâ"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ñúðâúð"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway óñòðîéñòâî"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Íàñòðîéêà íà proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Ïðîñëåäÿâàíå íà ID íà ìðåæîâàòà êàðòà (ïîëåçíî ïðè ëàïòîïè)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy-ñúðâúðà òðÿáâà äà å http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ñúðâúðà òðÿáâà äà å ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Íàñòðîéêà íà Èíòåðíåò"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Èñêàòå ëè ñåãà äà îïèòàòå âðúçêà êúì Èíòåðíåò ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Èçïðîáâàíå íà âðúçêàòà..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ñèñòåìàòà â ìîìåíòà å ñâúðçàíà êúì Èíòåðíåò."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Çà âàøà ñèãóðíîñò, ñåãà òÿ ùå áúäåòå îòâúðçàíà."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Ñèñòåìàòà íå èçãëåæäà ñâúðçàíà êúì Èíòåðíåò.\n"
-"Îïèòàéòå ñå äà ïðåíàñòðîèòå âðúçêàòà."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Íàñòðîéêà íà âðúçêàòà"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Ìîëÿ, ïîïúëíåòå èëè ïðîâåðåòå ïîëåòî ïî-äîëó"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Ïàìåò (DMA) íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 íà êàðòàòà"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ëè÷íèÿ âè òåëåôîíåí íîìåð"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Èìå íà äîñòàâ÷èêà (íàïð. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Òåëåôîíåí íîìåð íà äîñòàâ÷èêà"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1-âè DNS íà äîñòàâ÷èêà (ïî æåëàíèå)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2-ðè DNS íà äîñòàâ÷èêà (ïî æåëàíèå)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Èçáåðåòå ñòðàíàòà ñè"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Ðåæèì íà íàáèðàíå"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Ñêîðîñò íà âðúçêàòà"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout íà âðúçêàòà (â ñåê)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Èìå íà àêàóíòà (ïîòåáèòåëñêî èìå)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Ïàðîëà íà àêàóíòà"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ìîíòèðàíåòî íå óñïÿ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ðàçøèðåíè äÿëîâå íå ñå ïîääúðæàò íà òàçè ïëàòôîðìà"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Èìàòå ïðàçíèíà â òàáëèöàòà ñ äÿëîâåòå, íî íå ìîãà äà ÿ èçïîëçâàì.\n"
-"Åäèíñòâåíèÿò íà÷èí å äà ïðåìåñòèòå ãëàâíèòå ñè äÿëîâå, çà äà èìàòå ïðàçíî "
-"ìÿñòî ñëåä extended-äÿëîâåòå"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Âúçñòàíîâÿâàíåòî îò ôàéëà %s íå óñïÿ: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Ãðåøêà ïðè çàïèñ âúâ ôàéëà %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Íåùî ëîøî ñòàâà ñ óñòðîéñòâîòî âè.\n"
-"Òåñòà çà öåëîñò íà äàííèòå ïðîïàäíà.\n"
-"Òîâà çíà÷è, ÷å ïèñàíåòî íà êàêâîòî è áèëî ïî äèñêà ùå ïðåâðúùà\n"
-"ïðîèçâîëíî â áîêëóê"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "íóæåí"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "âàæåí"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ìíîãî äîáúð"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "äîáúð"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ñòàâà"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Îáùà Unix Ïðèíòåðíà Ñèñòåìà"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Íîâî ïîêîëåíèå"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Ëèíååí Ïðèíòåðåí Äåìîí"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Ïå÷àòàé, Áåç Îïàøêà"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Ëîêàëåí ïðèíòåð"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Îòäàëå÷åí ïðèíòåð"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Ïðèíòåð íà îòäàëå÷åí CUPS ñúðâúð"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Ïðèíòåð íà îòäàëå÷åí LPD ñúðâúð"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Ìðåæîâ ïðèíòåð (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Ïðèíòåð íà SMB/Windows 95/98/NT ñúðâúð"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Ïðèíòåð íà NetWare ñúðâúð"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Âúâåäåòå URI íà ïå÷àòàùî óñòðîéñòâî"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Ïðåêàðàé ðàáîòàòà ïðåç êîìàíäà"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Íåèçâåñòåí ìîäåë"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Ëîêàëåí ïðèíòåð"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Îòäàëå÷åí ïðèíòåð"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Ãðåøêà ïðè çàïèñ âúâ ôàéëà %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(íà %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(íà òàçè ìàøèíà)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP íà CUPS ñúðâúðà"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Ïî ïîäðàçáèðàíå)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Èçáåðåòå âðúçêà êúì ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Êàê å ñâúðçàí ïðèíòåðúò ?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Îòäàëå÷åíèòå íà CUPS ñúðâúð ïðèíòåðè íå òðÿáâà äà íàñòðîéâàòå\n"
-"òóê; òåçè ïðèíòåðè ùå áúäàò çàñå÷åíè àâòîìàòè÷íî. Ìîëÿ,\n"
-"èçáåðåòå \"Ïðèíòåð íà îòäàëå÷åí CUPS ñúðâúð\" â òîçè ñëó÷àé."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Îòäàëå÷åí CUPS ñúðâúð"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Ñ îòäàëå÷åíèòå CUPS ñúðâúðè, íÿìà íóæäà äà íàñòðîéâàòà êàêúâòî\n"
-"è äà áèëî ïðèíòåð òóê; CUPS ñúðâúðèòå èíôîðìèðàò àâòîìàòè÷íî ìàøèíàòà\n"
-"çà òåõíèòå ïðèíòåðè. Âñè÷êè ïðèíòåðè èçâåñòíè íà ìàøèíàòà âè\n"
-"ñà èçðåäåíè â ïîëåòî \"Ïðèíòåð ïî ïîðäðàçáèðàíå\". Èçáåðåòå\n"
-"ïðèíòåð ïî ïîäðàçáèðàíå çà ìàøèíàòà ñè îò òàì è öúêíåòå íà áóòîíà\n"
-"\"Ïðèëîæè/Ïðåïðî÷åòè ïðèíòåðèòå\". Öúêíåòå íà ñúùèÿ áóòîí, çà äà\n"
-"îïðåñíèòå ñïèñúêà (ìîæå äà îòíåìå äî 30 ñåêóíäè ñëåä ïóñêàíåòî\n"
-"íà CUPS, äîêàòî âñè÷êè îòäàëå÷åíè ïðèíòåðè ñòàíàò âèäèìè).\n"
-"Êîãàòî CUPS ñúðâúð å íà äðóãà ìðåæà, òðÿáâà äà äàäåòå IP àäðåñ è,\n"
-"åâåíòóëàíî íîìåð íà ïîðò íà CUPS ñúðâúðà, çà äà âçåìåòå èíôîðìàöèÿ\n"
-"çà ïðèíòåðà îò ñúðâúðà, èíà÷å îñòàâåòå ïîëåòî ïðàçíî."
-
-#: ../../printerdrake.pm_.c:72
-#, fuzzy
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Îáèêíîâåíî, CUPS àâòîìàòè÷íî ñå íàñòðîéâà ñïîðåä ìðåæîâàòà ñðåäà,\n"
-"òàêà ÷å äà èìàòå äîñòúï äî ïðèíòåðèòå íà CUPS ñúðâúðà â ëîêàëíàòà\n"
-"âè ìðåæà. Àêî íå ñðàáîòè êàêòî òðÿáâà, èçêëþ÷åòå \"Àâòîìàòè÷íà\n"
-"CUPS íàñòðîéêà\" è ïîïðàâåòå ôàéëà /etc/cups/cupsd.conf ðú÷íî. Íå\n"
-"çàáðàâÿéòå äà ðåñòàðòèðàòå CUPS ñëåä òîâà (êîìàíäà: \"service\n"
-"cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP àäðåñúò òðÿáâà äà áúäå âúâ ôîðìàò 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Íîìåðúò íà ïîðòà òðÿáâà äà å öÿëî ÷èñëî !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP íà CUPS ñúðâúðà"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ïîðò"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Àâòîìàòè÷íà íàñòðîéêà íà CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Çàñè÷àíå íà óñòðîéñòâà ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Òåñòâàíå ïîðòîâåòå"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Äîáàâè ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Ëîêàëåí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Îòäàëå÷åí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Èçïîëçâàé àâòîìàòè÷íî çàñè÷àíå"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Èìå íà îòäàëå÷åí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "çàñå÷åíà %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Âúâåäåòå URI íà ïå÷àòàùî óñòðîéñòâî"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Ëîêàëåí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Ìîëÿ, èçáåðåòå ñåðèåí ïîðò êúì êîéòî ñâúðçàí ìîäåìúò âè."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Âúâåäåòå URI íà ïå÷àòàùî óñòðîéñòâî"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Íàñòðîéêà íà öâåòîâå"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Èíñòàëèðàíå íà ïàêåòè ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Èíñòàëèðàíå íà ïàêåòè ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "×åòåíå íà áàçàòà äàííè îò ïðèíòåðè ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "×åòåíå íà áàçàòà äàííè îò ïðèíòåðè ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Îïöèè íà îòäàëå÷åí lpd-ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Çà äà èçïîëçâàòå îòäàëå÷åí lpd ïðèíòåð, òðÿáâà\n"
-"äà ïðåäîñòàâèòå èìåíàòà íà õîñòà íà ïðèíòåðíèÿ ñúðâúð è\n"
-"èìåòî íà ïðèíòåðà íà òîçè ñúðâúð."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Èìå íà îòäàëå÷åí õîñò"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Èìå íà îòäàëå÷åí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Ëèïñâà èìå íà èìå íà õîñò !"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ëèïñâà èìå íà îòäàëå÷åí ïðèíòåð !"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Íàñòðîéêè íà SMB (Windows 9x/NT) ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Çà äà ïå÷àòàòå íà SMB ïðèíòåð, òðÿáâà äà äàäåòå èìåòî\n"
-"íà SMB õîñòà (Çàáåëåæêà ! Òî ìîæå äà å ðàçëè÷íî îò TCP/IP õîñòà !)\n"
-"è âúçìîæíî IP àäðåñà íà ïðèíòåðñêèÿ ñúðâúð, êàêòî è îáùîòî èìå íà\n"
-"ïðèíòåðà, äî êîéòî èñêàòå äîñòúï è ïîäõîäÿùî èìåí, ïàðîëà è èíôîðìàöèÿ\n"
-"çà ðàáîòíàòà ãðóïà."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Õîñò íà SMB ñúðâúð"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP íà SMB ñúðâúð:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Îáùî èìå"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Ðàáîòíà ãðóïà"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Òðÿáâà äà áúäàò çàäàäåíè è èìåòî è IP àäðåñà íà ñúðâúðà !"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Ëèïñâà èìå íà SAMBA share !"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Îïöèè çà NetWare ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Çà äà ïå÷àòèòå íà NetWare ïðèíòåð ,òðÿáâà äà çíàåòå èìåî ìó è âúçìîæíî\n"
-"àäðåñà íà ñúðâúðà, êàêòî è èìåòî íà îïàøêàòà,ïîòðåáèòåëñêîòî èìå,ïàðîëà."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Ñúðâúð íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Èìå íà ïå÷àòíàòà îïàøêàòà"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Ëèïñâà èìå íà NCP ñúðâúð !"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Ëèïñâà èìå íà NCP îïàøêà !"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Îïöèè íà Socket ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Çà äà ïå÷àòàòå íà socket ïðèíòåð, òðÿáâà äà ïðåäîñòàâèòå\n"
-"èìåòî íà õîñòà íà ïðèíòåðà è, åâåíòóàëíî, íîìåð íà ïîðò.\n"
-"Íà HP JetDirect ñúðâúðè, íîìåðúò íà ïîðòà îáèêíîâåííî å 9100,\n"
-"íà äðóãè ñúðâúðè ìîæå äà âàðèðà. Âèæòå ðúêîâîñòâîòî íà\n"
-"õàðäóåðà ñè."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Èìå íà õîñò íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Ëèïñâà èìå íà õîñò íà ïðèíòåða !"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Ïå÷àòàùî óñòðîéñòâî URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Òðÿáâà äèðåêòíî äà îïðåäåëèòå URI çà äîñòúï äî ïðèíòåðà. URI òðÿáâà äà "
-"èçïúëíè èëè CUPS èëè Foomatic ñïåöèôèêàöèèòå. Îòáåëåæåòå, ÷å íå âñè÷êè "
-"òèïîâå URI ñå ïîääðúðæàò îò spooler-èòå."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Òðÿáâà äà áúäå âúâåäåí âàëèäåí URI !"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Âñåêè ïðèíòåð ñå íóæäàå îò èìå (íàïðèìåð lp).\n"
-"Ïîëåòàòà Îïèñàíèå è Ìåñòîïîëîæå íå òðÿáâà äà áúäàò\n"
-"ïîïúëâàíè. Èìà êîìåíòàðè çà ïîòðåáèòåëèòå."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Èìå íà ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Îïèñàíèå"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ìåñòîïîëîæåíèå"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Ïîäãîòâÿíå íà áàçàòà äàííè îò ïðèíòåðè ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Èìå íà îòäàëå÷åí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Âñè÷êî ïðàâèëíî ëè å ?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Èìå íà îòäàëå÷åí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Èçáîð ìîäåë íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Êàêúâ ìîäåë ïðèíòåð èìàòå ?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Íàñòðîéêè íà OKI Winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Íàñòðîéêà íà Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-#, fuzzy
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet ïðèíòåðíèòå äðàéâåðè ïðåäîñòàâåíè îò Lexmark ïîääúðæàò\n"
-"ñàìî ëîêàëíè ïðèíòåðè, áåç ïðèíòåðè íà îòäàëå÷åíè ìàøèíè èëè\n"
-"ïðèíòåðíè ìàøèíè. Ìîëÿ, ñâúðæåòå ïðèíòåðà ñè íà ëîêàëåí ïîðò\n"
-"èëè ãî íàñòðîéòå íà ìàøèíàòà, êúì êîÿòî å ñâúðçàí."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-#, fuzzy
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Íàñòðîéêè íà ïðèíòåðà ïî ïîäðàçáèðàíå\n"
-"Òðÿáâà äà ñòå ñèãóðíè, ÷å ãîëåìèíàòà íà ñòðàíèöàòà\n"
-"è òèïà íà ìàñòèëîòî (àêî èìà) ñà íàñòðîåíè ïðàâèëíî.\n"
-"Îòáåëåæåòå, ÷å ïðè ìíîãî âèñîêî êà÷åñòî íà èçõîäà íà\n"
-"ïðèíòåðà, òîé ìîæå çíà÷èòåëíî äà ñå çàáàâè."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Íàñòðîéêàòà %s òðÿáâà äà å öÿëî ÷èñëî !"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Íàñòðîéêàòà %s òðÿáâà äà å ÷èñëî !"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Îïöèÿòà %s å èçâúí ãðàíèöèòå !"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Èñêàòå ëè äà íàñòðîèòå òîçè ïðèíòåð (\"%s\")\n"
-"êàòî ïðèíòåð ïî ïîäðàçáèðàíå ?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Òåñòîâè ñòðàíèöè"
-
-#: ../../printerdrake.pm_.c:1583
-#, fuzzy
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Ìîëÿ, èçáåðåòå òåñòîâà ñòðàíèöà çà ïå÷àò.\n"
-"Çàáåëåæêà: òåñòîâàòà ñòðàíèöà çà ñíèìêà ìîæå äà îòíåìå äîñòà äúëãî\n"
-"âðåìå äà ñå èçïå÷àòà è íà ëàçåðíè ïðèíòåðè ñ ìàëêî ïàìåò ìîæå âúîáùå\n"
-"äà íå èçëåçå.  ïîâå÷åòî ñëó÷àè å äîñòàòú÷íà ñòàíäàðòíà òåñòîâà ñòðàíèöà."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Áåç òåñòîâè ñòðàíèöè"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Ïå÷àò"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Ñòàíäàðòíà òåñòîâà ñòðàíèöà"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Àëòåðíàòèâíà òåñòîâà ñòðàíèöà (Ïèñìî)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Àëòåðíàòèâíà òåñòîâà ñòðàíèöà (À4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Òåñòîâà ñòðàíèöà ñúñ ñíèìêà"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Îòïå÷àòâàíå íà òåñòîâè ñòðàíèöè"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Îòïå÷àòâàíå íà òåñòîâ(àòà/èòå) ñòðàíèö(à/è) ..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Òåñòîâèòå ñòðàíèöè ñà èçïðàòåíè êúì ïðèíòåðà.\n"
-"Ìîæå äà îòíåìå ìàëêî âðåìå ïðåäè ïðèíòåðà äà çàïî÷íå.\n"
-"Ñúñòîÿíèå íà ïå÷àòà:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Òåñòîâèòå ñòðàíèöè ñà èçïðàòåíè êúì ïðèíòåðíà.\n"
-"Ìîæå äà îòíåìå ìàëêî âðåìå ïðåäè ïðèíòåðà äà çàïî÷íå.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Ïðîðàáîòè ëè êàêòî òðÿáâà ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Çà äà èçïå÷àòàòå ôàéë îò êîìàíäíèÿ ðåä (òåðìèíàëåí ïðîçîðåö), ìîæåòå èëè äà "
-"èçïîëçâàòå êîìàíäàòà \"%s <file>\" èëè ãðàôè÷íèÿ ïå÷àòàù èíñòðóìåíò: \"xpp "
-"<file>\" èëè \"kprinter <file>\". Ãðàôè÷íèòå èíñòðóìåíòè âè ïîçâîëÿâàò äà "
-"èçáèðàòå ïðèíòåðà è äà ïîïðàâÿòå ëåñíî íàñòðîéêèòå íà îïöèèòå.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ìîæåòå äà èçïîëçâàòå òàçè êîìàíäà è â ïîëåòî \"Êîìàíäà çà ïå÷àò\" íà "
-"ïå÷àòíèòå äèàëîçè â ìíîƒî ïðèëîæåíèÿ. Íî ò¢ê íå ïîñòàâÿéòå èìåòî íà ôàéëà, "
-"çàùîòî òî ñå ïîäàâà îò ïðèëîæåíèåòî.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Êîìàíäàòà \"%s\" ñúùî òàêà âè ïîçâîëÿâà äà ïîïðàâèòå íàñòðîéêèòå íà îïöèèòå "
-"çà îïðåäåëåíà ðàáîòà íà ïðèíòåðà. Ïðîñòî äîáàâåòå öåëàíèòå íàñòðîéêè êúì "
-"êîìàíäíèÿ ðåä, íàïð. \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Çà äà âèäèòå ñïèñúê íà äîñòúïíèòå îïöèè çà òåêóùèÿ ïðèíòåð, èëè ïðî÷åòåòå "
-"ñïèñúêà ïîêàçàí ïî-äîëó èëè öúêíåòå íà áóòîíà \"Ñïèñúê ñ îïöèè çà ïå÷àò\".\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Çà äà èçïå÷àòàòå ôàéë îò êîìàíäíèÿ ðåä (òåðìèíàëåí ïðîçîðåö) èçïîëçâàéòå "
-"êîìàíäàòà \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ìîæåòå äà èçïîëçâàòå òàçè êîìàíäà è â ïîëåòî \"Êîìàíäà çà ïå÷àò\" íà "
-"ïå÷àòíèòå äèàëîçè â ìíîãî ïðèëîæåíèÿ. Íî òóê íå ïîñòàâÿéòå èìåòî íà ôàéëà, "
-"çàùîòî òî ñå ïîäàâà îò ïðèëîæåíèåòî.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-#, fuzzy
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Çà äà âèäèòå ñïèñúê ñ äîñòúïíèòå îïöèè çà òåêóùèÿ ïðèíòåð, öúêíåòå íà áóòîíà "
-"\"Ñïèñúê ñ îïöèè çà ïå÷àò\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Çà äà îòïå÷àòàòå ôàéë îò êîìàíäíèÿ ðåä (òåðìèíàëåí ïðîçîðåö), èçïîëçâàéòå "
-"êîìàíäàòà \"%s <file>\" èëè \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Êîìàíäèòå \"%s\" è \"%s\" ñúùî òàêà ïîçâîëÿâàò äà ïîïðàâÿòå èçáðàíèòå "
-"íàñòðîéêè çà îïðåäåëåíà ðàáîòà íà ïðèíòåðà. Ïðîñòî äîáàâåòå èñêàíèòå "
-"íàñòðîéêè êúì êîìàíäíèÿ ðåä, íàïð. \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Çàòâîðè"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ïå÷àòàíå íà ïðèíòåð \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ïå÷àòàíå íà ïðèíòåð \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Ñïèñúê ñ ïðèíòåðíè îïöèè"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "×åòåíå íà äàííè îò ïðèíòåðà ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Ïðåíîñ íà íàñòðîéêà íà ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Ìîæåòå äà êîïèðàòå íàñòðîéêèòå íà ïðèíòåðà, êîèòî ñòå èçâúðøèëè\n"
-"çà spoller %s íà %s, òåêóùèÿ spooler. Öÿëàòà èíôîðìàöèÿ çà íàñòðîéêèòå\n"
-"(èìå íå ïðèíòåð, îïèñàíèå, ìåñòîïîëîæåíèå, âèä íà âðúçêàòà è\n"
-"íàñòðîéêè ïî ïîäðàçáèðàíå) ñå ïðåçàïèñâàò, íî ðàáîòèòå íå ñå\n"
-"ïðåõâúðëÿò.\n"
-"Íå âñè÷êè îïàøêè ìîãàò äà áúäàò ïðåõâúðëåíè ïî ñëåäíèòå ïðè÷èíè:\n"
-
-#: ../../printerdrake.pm_.c:1818
-#, fuzzy
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS íå ïîääúðæà ïðèíòåðè íà Novell ñúðâúðè èëè ïðèíòåðè\n"
-"èçïðàùàùè äàííè âúâ ñâîáîäíî-èçãðàäåíà êîìàíäà.\n"
-
-#: ../../printerdrake.pm_.c:1820
-#, fuzzy
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ïîääúðæà ñàìî ëîêàëíè ïðèíòåðè, îòäàëå÷åíè LPD ïðèíòåðè\n"
-"è Socket/TCP ïðèíòåðè.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD è LPRng íå ïîääúðæà IPP ïðèíòåðè.\n"
-
-#: ../../printerdrake.pm_.c:1824
-#, fuzzy
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Êàòî äîïúëíåíèå, îïàøêèòå íå ñúçäàäåíè ñ òàçè ïðîãðàìà\n"
-"èëè \"foomatic-configure\" íå ìîãàò äà áúäàò ïðåõâúðëÿíè."
-
-#: ../../printerdrake.pm_.c:1825
-#, fuzzy
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ñúùî òàêà, ïðèíòåðè íàñòðîåíè ñ PPD ôàéëîâå ïðåäîñòàâåíè\n"
-"îò ïðîèçâîäèòåëèòå èì èëè ñ îðèãèíàëíè CUPS äðàéâåðè íå\n"
-"ìîãàò äà áúäàò ïðåõâúðëÿíè."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Îòáåëåæåòå ïðèíòåðèòå, êîèòî èñêàòå äà ïðåõâúðëèòå è öúêíåòå\n"
-"\"Ïðåõâúðëè\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Íå ïðåõâúðëÿé ïðèíòåðè"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Ïðåõâúðëè"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ïðèíòåð ñ èìå \"%s\" âå÷å ñúùåñòâóâà â %s.\n"
-"Öúêíåòå \"Ïðåõâúðëè\", çà äà ãî ïðåçàïèøåòå.\n"
-"Ìîæåòå ñúùî òàêà äà íàïèøåòå íîâî èìå èëè äà ïðîïóñíòå ïðèíòåðà."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Èìåòî íà ïðèíòåðà òðÿáâà äà ñúäúðæà ñàìî áóêâè, ÷èñëà è ïîä÷åðòàâêà"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Ïðèíòåðúò \"%s\" âå÷å ñúùåñòâóâà,\n"
-"íàèñòèíà ëè èñêàòå äà ïðåçàïèøåòå íàñòðîéêàòà ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Íîâî èìå íà ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Ïðåõâúðëÿíå íà %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, fuzzy, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Ïðåõâúðëèëè ñòå ïðèíòåð ïî ïîäðàçáèðàíå (\"%s\"),\n"
-"Èñêàòå ëè äà ãî îñòàâèòå ïî ïîäðàçáèðàíå â íîâàòà\n"
-"ïðèíòåðíà ñèñòåìà %s ?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Îïðåñíÿâàíå íà äàííèòå îò ïðèíòåðà ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Íàñòðîéêà íà îòäàëå÷åí ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Ñòàðòèðàíå ìðåæàòà ...."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Â ìîìåíòà íàñòðîéâàì ìðåæàòà"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Ôóíêöèîíàëíîñòòà íà ìðåæàòà íå å íàñòðîåíà"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Ïðîäúëæè áåç íàñòîéêà íà ìðåæàòà"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-#, fuzzy
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Íÿìàøå äîñòúï äî ìðåæàòà è òàêúâ íå ìîæåøå äà áúäå\n"
-"óñòàíîâåí. Ìîëÿ, ïðîâåðåòå íàñòðîéêàòà è õàðäóåðà\n"
-"ñè. Òîãàâà îïèòàéòå äà íàñòðîèòå îòäàëå÷åíèÿ ïðèíòåð\n"
-"îòíîâî."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Ðåñòàðòèðàíå íà ïðèíòåðíàòà ñèñòåìà"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "âèñîêî"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "ïàðàíîè÷íî"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Èíñòàëèðàíå íà ïðèíòåðíàòà ñèñòåìà â %s íèâî íà ñèãóðíîñò"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Ñòàðòèðàíå íà ïðèíòåðíàòà ñèñòåìà ïðè ñòàðòèðàíå"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Ïðîâåðêà íà èíñòàëèðàíèÿ ñîôòóåð..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Èçòðèâàíå íà LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Èçòðèâàíå íà LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Èçáåðåòå ïðèíòåðåí spooler"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Êîÿ ïðèíòåðíà ñèñòåìà (spooler) èçêàòå äà èçïîëçâàòå ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Íàñòðîéêà íà ïðèíòåðà \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Èíñòàëèðàíå íà ïàêåòè ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Îïöèè íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Ïîäãîòâÿíå íà PinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Íàñòðîéêà íà ïðèíòåðà \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Èñêàòå ëè äà íàñòðîèòå ïå÷àòà ?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Ïå÷àòíà ñèñòåìà: "
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Ñëåäíèòå ïðèíòåðè ñà íàñòðîåíè.\n"
-"Öúêíåòå íà åäèí îò òÿõ, çà äà ãî ðåäàêòèðàòå\n"
-"èëè çà äà ïîëó÷èòå èíôîðìàöèÿ çà íåãî, èëè\n"
-"âúðõó \"Äîáàâè Ïðèíòåð\", çà äà äîáàâèòå íîâ ïðèíòåð."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Ñëåäíèòå ïðèíòåðè ñà íàñòðîåíè.\n"
-"Öúêíåòå íà åäèí îò òÿõ, çà äà ãî ðåäàêòèðàòå\n"
-"èëè çà äà ïîëó÷èòå èíôîðìàöèÿ çà íåãî, èëè\n"
-"âúðõó \"Äîáàâè Ïðèíòåð\", çà äà äîáàâèòå íîâ ïðèíòåð."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Íàñòîéêà íà ìðåæàòà"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Íîðìàëåí ðåæèì"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Èñêàòå ëè äà íàñòðîèòå äðóã ïðèíòåð ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Ïîïðàâè íàñòðîéêèòå íà ïðèíòåð"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Ïðèíòåð %s: %s %s\n"
-"Êàêâî èñêàòå äà ïîïðàâèòå ïî òîçè ïðèíòåð ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Äàâàé !"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Òèï íà âðúçêàòà êúì ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Èìå íà ïðèíòåðà, îïèñàíèå, ìåñòîïîëîæåíèå"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Ïðîèçâîäèòåë íà ïðèíòåðà, ìîäåë, äðàéâåð"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Ïðîèçâîäèòåë íà ïðèíòåðà, ìîäåë"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Îïðåäåëè òîçè ïðèíòåð çà ïîëçâàíå ïî ïîäðàçáèðàíå"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Îòïå÷àòâàíå íà òåñòîâè ñòðàíèöè"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Èñêàòå ëè äà íàñòðîèòå äðóã ïðèíòåð ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Ïðåìàõâàíå íà ïðèíòåðà"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Èçòðèâàíå íà ñòàð ïðèíòåð \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Ïðèíòåð ïî ïîäðàçáèðàíå"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Ïðèíòåðúò \"%s\" âå÷å å îïðåäåëåí çà ïîëçâàíå ïî ïîäðàçáèðàíå."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Íàèñòèíà ëè èñêàòå äà ïðåìàõíåòå ïðèíòåðà \"%s\" ?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Èçòðèâàíå íà ïðèíòåðà \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy íàñòðîéêà"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Äîáðå äîøëè â íàñòðîéêàòà íà Proxy.\n"
-"\n"
-"Òóê ùå ìîæåòå äà óñòàíîâèòå âàøèòå HTTP è FTP proxy\n"
-"ñúñ èëè áåç ïîòðåáèòåëñêî èìå è ïàðîëà\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Ìîëÿ, ïîïúëíåòå èíôîðìàöèÿòà çà HTTP proxy.\n"
-"Îñòàâåòå ïðàçíî, àêî íå èñêàòå HTTP proxy."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ïîðò"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL òðÿáâà äà å çàïî÷âà ñ 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Íîìåðúò íà ïîðò òðÿáâà äà å öèôðà"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Ìîëÿ, ïîïúëíåòå èíôîðìàöèÿòà çà FTP proxy.\n"
-"Îñòàâåòå ïðàçíî, àêî íå èñêàòå FTP proxy."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL òðÿáâà äà çàïî÷âà ñ 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ìîëÿ, âúâåäåòå èìå è ïàðîëà çà proxy, àêî èìà.\n"
-"Îñòàâåòå ïðàçíî, àêî íå èñêàòå èìå/ïàðîëà"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "ïîòðåáèòåëñêî èìå"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ïàðîëà"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "îùå âåäíúæ ïàðîëà"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Ïàðîëèòå íà ñúâïàäàò. Îïèòàéòå ïàê !"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Íå ìîãà äà ïðèáàâÿ äÿë êúì _ôîðìàòèðàí_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ôàéëúò %s íå ìîæå äà áúäå çàïèñàí"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ïðîïàäíà"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ïðîïàäíà (ìîæå áè raidtools ëèïñâàò ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Íÿìà äîñòàòú÷íî äÿëîâå çà RAID íèâî %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ïóñíè ALSA (Advanced Linux Sound Architecture) çâóêîâàòà ñèñòåìà"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacrton - ïåðèîäè÷íî èçïúëíÿâàíå íà êîìàíäè ïî ðàçïèñàíèå."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ñå èçïîëçâà çà íàáëþäåíèå íà áàòåðèÿòà è çàïèñâàéêè ñòàòóñà ÷ðåç\n"
-"syslog. Ìîæå ñúùî äà ñå èçïîëçâà çà ñïèðàíå íà ìàøèíàòà, êîãàòî áàòåðèÿòà å "
-"èçòîùåíà."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ïóñêà êîìàíäè ïî ðàçïèñàíèå âúâ âðåìå îïðåäåëåíî îò êîìàíäàòà at è ïóñêà\n"
-"íàáîð îò äðóãè, êîãàòî íàòîâàðåíîñòòà ñïàäíå äîñòàòú÷íî."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron å ñòàíäàðòíà UNIX ïðîãðàìà, êîÿòî ïåðèîäè÷íî ïóñêà îïðåäåëåíè ïðîãðàìè\n"
-"ïî ðàçïèñàíèå. vixie cron äîáàâÿ ìíîæåñòâî ïðåèìóùåñòâà íàä òåçè íà ïðîñòèÿ\n"
-"UNIX cron, âêëþ÷èòåëíî ïî-äîáðà ñèãóðíîñò è ìîùíè íàñòðîéâàùè îïöèè."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM äîáàâÿ ïîääðúæêà íà ìèøêà â òåêñòîâî-áàçèðàíèòå Linux ïðèëîæåíèÿ êàòî\n"
-"Midnight Commander. Ñúùî òàêà ïîçâîëÿâà áàçèðàíèòå íà ìèøêà êîíçîëè\n"
-"ðåæè-è-ëåïè îïåðàöèè, è âêëþ÷âà ïîääðúæêà íà èçêà÷àùè ìåíþòà íà êîçîëàòà."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ïðàâè ïðîáè íà õàðäóåðà, è åâåíòóàëíî íàñòðîéâà\n"
-"íîâ/ïðîìåíåí õàðäóåð."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache å World Wide Web (WWW) ñúðâúð. Òîé ñëóæè äà îáðàáîòâà íà HTML "
-"ôàéëîâå\n"
-"è CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (÷åñòî íàðè÷àí inetd) ïóñêà ðàçëè÷íè äðóãè\n"
-"Èíòåðíåò óñëóãè. Òîé îòãîâàðÿ çà ïóñêàíåòî íà ìíîãî óñëóãè îò ðîäà íà\n"
-"telnet, ftp, rsh è rlogin. Èçêëþ÷âàíåòî íà inetd èçêëþ÷âà âñè÷êè óñëóãè,\n"
-"çà êîèòî îòãîâàðÿ."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Âêëþ÷è ôèëòðèðàíåòî íà ïàêåòè çà Linux ÿäðà ñåðèÿ 2.2, çà\n"
-"íàñòðîêà íà çàùèòíàòà ñòåíà, s cel çàùèòàâà íà ìàøèíàòà âè îò\n"
-"ìðåæîâè àòàêè."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Òîçè ïàêåò çàðåæäà ìàðêèðàíàòà êëàâèàòóðíà íàðåäáà â /etc/sysconfig/"
-"keyboard.\n"
-"Òÿ ìîæå äà áúäå èçáðàíà ñ èíñòðóìåíòà kbdconfig. Òðÿáâà äà îñòàâèòå "
-"òîâàâêëþ÷åíî çà ïîâå÷åòî ìàøèíè."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Àâòîìàòè÷íî ðåãåíåðèðàíå íà header-èòå íà àäðîòî, â /boot çà\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Àâòîìàòè÷íî çàñè÷àíå è íàñòðîéêà íà õàðäóåðà ïðè ñòàðòèðàíå."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ïîíÿêîãà óðåæäà èçâúðøâàíåòî íà ðàçëè÷íè çàäà÷è\n"
-"ïðè ñòàðòèðàíå çà ïîääðúæêà íà ñèñòåìíàòà íàñòðîéêà."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd å äåìîíà çà ïå÷àò íåîáõîäèì íà lpr äà ðàáîòè íîðìàëíî. Òîé ïðîñòî å\n"
-"ñúðâúð, êîéòî îïðåäåëÿ ðàáîòèòå çà ïå÷àò íà ïðèíòåð(à/èòå)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server ñå èçïîëçâà çà èçãðàæäàíå íà âèñîêîïðîèçâîäèòåëåí\n"
-"è äîáðå äîñòúïåí ñúðâúð."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) å Domain Name Server (DNS), êîéòî ñå èçïîëçâà äà ïðåâúðíå\n"
-"èìåòî íà õîñòà äî IP àäðåñ."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ìîíòèðà è äåìîíòèðà âñÿêàêâè Network File System (NFS), SMB (LAN\n"
-"Manager/Windows), è NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Àêòèâèðà/äåàêòèâèðà âñè÷êè ìðåæîâè èíòåðôåéñè, íàñòðîåíè äà ñå ïóñêàò\n"
-"ïðè ñòàðòèðàíå íà ìàøèíàòà."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS å ïîïóëÿðåí ïðîòîêîë çà îáìåí íà ôàéëîâå ïî TCP/IP ìðåæè.\n"
-"Òàçè óñëóãà îñèãóðÿâà ôóíêöèîíàëíîñòòà íà NFS ñúðâúðà, êîéòî ñå íàñòðîéâà\n"
-"÷ðåç ôàéëà /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS å ïîïóëÿðåí ïðîòîêîë çà îáìåí íà ôàéëîâå ïî TCP/IP ìðåæè.\n"
-"Òàçè óñëóãà îñèãóðÿâà ôóíêöèîíàëíîñòòà íà çàêëþ÷âàíåòî íà NFS ôàéëîâåòå."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Àâòîìàòè÷íî âêëþ÷âàíå íà numlock êëàâèøà ïîä êîíçîëà è\n"
-"XFree ïðè ñòàðòèòàíå."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ïîääðúæêà íà OKI 4w è ñúâìåñòèìè win-ïðèíòåðè."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ïîääúðæêàòà îáèêíîâåííî ïîääúðæà íåùà êàòî ethernet è ìîäåìè â\n"
-"laptop-è. Òîâà íÿìà äà ñå ñòàðòèðà ïðåäè äà áúäå íàñòðîåí, òàêà ÷å å\n"
-"ïî-äîáðå äà ÿ èìàòå èíñòàëèðàíà íà ìàøèíè, êîèòî íå ñå íóæäàÿò îò íåÿ."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ñå ñïðàâÿ ñ RPC âðúçêè, êîèòî ñå èçïîëçâàò îò ïðîòîêîëè êàòî\n"
-"NFS è NIS. portmap ñúðâúðà òðÿáâà äà å ïóñíàò íà ìàøèíè, êîèòî ðàáîòÿò êàòî\n"
-"ñúðâúð çà ïðîòîêîëè, êîèòî ñå íóæäàÿò äà èçïîëçâàò RPC ìåõàíèçúì."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix å Main Transport Agent (MTA), êîéòî å ïðîãðàìà êîÿòî ïðåíàñÿ\n"
-"ïîøà îò ìàøèíà íà ìàøèíà."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Çàïàçâà è âúçñòàíîâÿòà ïîòîêà íà ñèñòåìíà åíòðîïèÿ çà ïî-ãîëÿìî êà÷åñòâî\n"
-"íà ïðîèçâîëíî ãåíåðèðàíå íà ÷èñëà."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Ñâúðæè ÷èñòè äðàéâåðè ñ áëîêîâè óñòðîéñòâà (êàòî äÿëîâå\n"
-"íà òâúðäèÿ äèñê), çà óïîòðåáÿòà îò ïðèëîæåíèÿ êàòî Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"touted äåìîíà ïîçâîëÿâà òàáëèöà çà IP ðóòèðàíå àâòîìàòè÷íî îáíîâÿâàíà ÷ðåç\n"
-"RIP ïðîòîêîëà. Äîêàòî RIP å øèðîêî èçïîëçâàíà çà ìàëêè ìðåæè, çà ïî-ñëîæíè\n"
-"ïðîòîêîëè çà ðóòèðàíå ñà íóæíè çà ñëîæíè ìðåæè. "
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ïðîòîêîëà ïîçâîëÿâà íà ìðåæîâèòå ïîòðåáèòåëè äà èçâëè÷àò\n"
-"ïàðàìåòðèòå íà âúçìîæíîñòèòå çà âñÿêà ìàøèíà íà ìðåæàòà."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ïðîòîêîëà ïîçâîëÿâà íà ìðåæîâèòå ïîòðåáèòåëè äà ïðîâåðÿâàò êîé å\n"
-"âëÿçúë íà äðóãà îòãîâàðÿùàòà ìàøèíà."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ïðîòîêîëà ïîçâîëÿâà íà îòäàëå÷åíè ïîòðåáèòåëè äà ñå ñäîáèÿò ñúñ ñïèñúê\n"
-"íà âñè÷êè ïîòðåáèòåëè âëåçëè íà ìàøèíà ñ ðàáîòåù rwho äåìîí (ïîäîáåí íà "
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Ïóñíêàíå çâóêîâàòà ñèñòåìà íà ìàøèíàòà âè"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog å ïðîãðàìà êîÿòî ìíîãî äåìîíè èçïîëçâàò äà çàïàçâàò ñúîáùåíèÿ â\n"
-"ðàçëè÷íè ñèñòåìíè ôàéëîâå (ëîãîâå). Äîáðå å ïîñòîÿííî äà ÿ èìàòå ðàáîòåùà."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Çàðåæäàíå äðàéâåðè çà âàøèòå USB óñòðîéñòâà."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Ñòàðòèðà X Font Server (òîâà å çàäúëæèòåëíî, çà äà òðúãíå XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Èçáèðà óñëóãèòå, êîèòî òðÿáâà äà ñå ïóñíàò ïðè ïóñêàíå íà ìàøèíàòà"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Ïå÷àòàíå"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Èíòåðíåò"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Ïîäåëÿíå íà ôàéëîâå"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Ñèñòåìà"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Îòäàëå÷åíà àäìèíèñòðàöèÿ"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Ñúðâúð Áàçè-äàííè"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Óñëóãè: %d àêòèâèðàíè îò %d ðåãèñòðèðàíè"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Óñëóãè"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ñòàðòèðàíå"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ñïðÿíà"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Óñëóèãè è äåìîíè"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Íÿìà äîïúëíèòåëíà èíôîðìàöèÿ\n"
-"çà òàçè óñëóãà, ñúæåëÿâàì."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ïðè çàðåæäàíå"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Ñúñòîÿíèå"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Ñåêòîð"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Ïðîòîêîë çà îñòàíàëèÿ ñâÿò"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Èíòåðíåò äîñòúï"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Ìóëòèìåäèÿ - Ãðàôèêà"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Ðàçðàáîòêà"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Êîíòðîëåí öåíòúð"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Ìðåæîâ èíòåðôåéñ"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Õîñò íà SMB ñúðâúð"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Èãðè"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Åêñïåðòíà"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "çàäúëæèòåëåí"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Èíñòàëèðàíå íà ïàêåòè ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Íå ìîãà äà ðàç÷åòà òàáëèöàòà íà äÿëîâåòå, ïðåêàëåíî å ïîâðåäåíà :(\n"
-"Ùå ñå îïèòàì äà ïðîäúëæà äà ðàç÷èñòâàì ëîøèòå äÿëîâå"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Ãðåøêà !"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Íå ìîãà äà íàìåðÿ íóæíà êàðòèíêà `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Íàñòðîé÷èê íà àâòîìàòè÷íà èñíòàëàöèÿ"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Íàñòðîéêà íà àâòîìàòè÷íèòå ñòúïêè"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Ìîëÿ, èçáåðåòå çà âñÿêà ñòúïêà, äàëè ùå ñå ïðåèãðàå êàòî ïðè èíñòàëàöèÿòà, "
-"èëè ùå áúäå ðú÷íà"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Ïîçäðàâëåíèÿ !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Äèñêåòàòà å óñïåøíî ñúçäàäåíà.\n"
-"Ñåãà ìîæåòå äà ïðåèãðàåòå èíñòàëàöèÿòà."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Èíñòàëèðàé"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Äîáàâÿíå íà ïîòðåáèòåë"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Äà ïðåìàõíà ëè loopback ôàéëà ?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Èçáîð íà ïàêåòè"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Ìîëÿ, èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Èçòðèâàíå íà îïàøêàòà"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Ïðåìàõíè Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Ïîòðåáèòåëñêî èìå"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Ìîëÿ, ïðîáâàéòå ìèøêàòà ñè"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Ìîëÿ, îïèòàéòå îòíîâî"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Ìîëÿ, îïèòàéòå îòíîâî"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "îùå âåäíúæ ïàðîëà"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN âðúçêà"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Èçáåðåòå âðúçêà êúì ïðèíòåðà"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Ìîëÿ, èçáåðåòå ïîäðåæäàíå íà êëàâèàòóðàòà."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Ìîëÿ, öúêíåòå íà íîñèòåëÿ"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Ìîëÿ, èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Ìîëÿ, ïðîáâàéòå ìèøêàòà ñè"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Ìðåæîâ èíòåðôåéñ"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Ïîòðåáèòåëñêî èìå"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Ìîëÿ, èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Ìîëÿ, èçáåðåòå èçïîëçâàí åçèê."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Èñêàòå ëè îïòèìèçàöèÿ íà äèñêîâåòå ?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Èñêàòå ëè îïòèìèçàöèÿ íà äèñêîâåòå ?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Åäèí ìîìåíò"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Wheel"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Wheel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Îïöèè íà ìîäóëà:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Íàñòðîéêà íà ìðåæàòà"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Ìîëÿ, èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Ìîëÿ, èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Ôàéëîâè ñèñòåìè"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Îïöèè"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Ìîëÿ, èçáåðåòå ñåðèåí ïîðò êúì êîéòî ñâúðçàí ìîäåìúò âè."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Íàñòðîéêà íà ìðåæàòà"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Ìîëÿ, èçáåðåòå òèï íà ìèøêàòà."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Âúçñòàíîâè îò äèñêåòà"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Ìîëÿ, èçáåðåòå òèï íà ìèøêàòà."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Äðóãà"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Èíñòàëèðàíå íà ñèñòåìàòà"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Âúçñòàíîâè îò ôàéë"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Âúçñòàíîâè îò ôàéë"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Êëèåíòñêà"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Ïîìîù"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Ïðåäèøåí"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Ñúñòîÿíèå"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Âúçñòàíîâè îò ôàéë"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Òåêñò"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Ïàêåòè çà èíñòàëèðàíå"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Ìîëÿ, èçáåðåòå èçïîëçâàí åçèê."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Ìîëÿ, èçáåðåòå èçïîëçâàí åçèê."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Ìîëÿ, èçáåðåòå èçïîëçâàí åçèê."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Ëîø backup-ôàéë"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Çàïàçè âúâ ôàéë"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Ìîëÿ, ïðîáâàéòå ìèøêàòà ñè"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ìîëÿ, èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Íàñòðîéêà íà ìðåæàòà"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Íàñòðîéêà íà ìðåæàòà"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Íàñòðîéêà íà ëîêàëíà ìðåæà"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Ôàéëîâè ñèñòåìè"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Èíñòàëàöèÿòà íà %s ïðîâàëåíà. Ïîÿâè ñå ñëåäíàòà ãðåøêà:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s íå å íàìåðåíî"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Ãîòîâî"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Ôîðìàòèðàé äèñêåòàòà"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ïîäãîòâÿì èíñòàëàöèÿòà"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "ñòàðòèðàé ãî"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "îãðàíè÷è"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Ôîðìàòèðàíå íà äÿëîâå"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Äåèíñòàëèðàì ïàêåòà"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Íàñòðîéêà íà ëîêàëíà ìðåæà"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ìÿñòî íà ìîíòèðàíå"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Èçáåðåòå äÿëîâåòå, êîèòî èñêàòå äà ôîðìàòèðàòå"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Îôèñ"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Îòêàç"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Ïðèíòåð"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Èíñòàëèðàíå íà ñèñòåìàòà"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Èçáåðåòå ôàéë"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Ïðåìàõâàíå íà ïðèíòåðà"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Ñòàðòîâî ñúîáùåíèå"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Íÿìàòå ìðåæîâ àäàïòåð!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Èíñòàëèðàé"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Íÿìàòå ìðåæîâ àäàïòåð!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Èçõîä îò èíñòàëàöèîííàòà ïðîãðàìà"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Ñïîäåëÿíå íà âðúçêàòà ñ Èíòåðíåò"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ñïîäåëÿíåòî íà âðúçêàòà êúì Èíòåðíåò å âå÷å àêòèâèðàíî"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Óñòàíîâêàòà íà Ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà å çàâúðøåíà.\n"
-" ìîìåíòà å âêëþ÷åíà.\n"
-"\n"
-"Êàêâî èñêàòå äà íàïðàâèòå ?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "èçêëþ÷è"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "îñòàâè"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ïðåíàñòðîéêà"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Èçêëþ÷âàíå íà ñúðâúðè ..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà â ìîìåíòà å èçêëþ÷åíî."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà å èçêëþ÷åíî."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Óñòàíîâêàòà íà Ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà å âå÷å çàâúðøåíà.\n"
-" ìîìåíòà å èçêëþ÷åíà.\n"
-"\n"
-"Êàêâî èñêàòå äà íàïðàâèòå ?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "âêëþ÷è"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Âêëþ÷âàíå íà ñúðâúðè ..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ñïîäåëÿíåòî íà Èíòåðíåò â ìîìåíòà å âêëþ÷åíî."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Íà ïúò ñòå äà íàñòðîèòå êîìïþòúðà ñè òàêà, ÷å äà ïîäåëÿ Èíòåðíåò âðúçêàòà\n"
-"ñè. Ñ òàçè âúçìîæíîñò, äðóãè êîìïþòðè â ëîêàëíàòà âè ìðåæà ùå ìîãàò äà\n"
-"èçïîëçâàò Èíòåðíåò âðúçêàòà íà òîçè êîìïþòúð.\n"
-"\n"
-"Îòáåëåæåòå: òðÿáâà âè îòäåëåí çà òîâà ìðåæîâ àäàïòåð, çà äà óñòàíîâèòå "
-"âúòðåøíàòà ñè ìðåæà (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Èíòåðôåéñ %s (èçïîëçâàù ìîäóë %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Èíòåðôåéñ %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Íÿìàòå ìðåæîâ àäàïòåð!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Â ñèñòåìàòà íå å îòêðèò ethernet ìðåæîâ àäàïòåð. Ìîëÿ, ñòàðòèðàéòå "
-"èíñòðóìåíòà çà íàñòðîéêà íà õàðäóåð."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Ìðåæîâ èíòåðôåéñ"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Â ñèñòåìàòà âè èìà ñàìî åäèí íàñòðîåí ìðåæîâ àäàïòåð:\n"
-"\n"
-"%s\n"
-"\n"
-"Ñìÿòàì äà óñòàíîâÿ ëîêàëíàòà âè ìðåæà íà òîçè àäàïòåð."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Ìîëÿ èçáåðåòå êîé ìðåæîâ àäàïòåð äà áúäå âêëþ÷åí êúì ëîêàëíàòà âè ìðåæà."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ôóíêöèîíàëíîñòòà íà ìðåæàòà íå å íàñòðîåíà"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Àâòîìàòè÷íà íàñòðîéêà íà CUPS"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Ïîïðàâè íàñòðîéêèòå íà ïðèíòåð"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP íà CUPS ñúðâúðà"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Âúçìîæåí êîíôèêò ñ àäðåñèòå â LAN ñ íàñòðîéêàòà íà %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Îòêðèòà å íàñòðîéêà íà Çàùèòíà Ñòåíà !"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Âíèìàíèå ! Îòêðèòà å íàñòðîéêà íà Çàùèòíà Ñòåíà. Ìîæå äà ñå íàëîæè íÿêàêâà "
-"ðú÷íà ïîïðàâêà ñëåä èíñòàëàöèÿòà."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Íàñòðîéêà ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Íàñòðîéâàùè ñêðèïòîâå, èíñòàëèðàíå íà ñîôòóåð, ñòàðòèðàíå íà ñúðâúðè..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Ïðîáëåìè ñ èíñòàëèðàíåòî íà ïàêåòà %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Âñè÷êî å íàñòðîåíî.\n"
-"Ñåãà ìîæåòå äà ñïîäåëèòå Èíòåðíåò âðúçêàòà ñè ñ äðóãè êîìïþòðè â ëîêàëíàòà "
-"âè ìðåæà èçïîëçâàéêè àâòîìàòè÷íà ìðåæîâà íàñòðîéêà (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Óñòàíîâêàòà âå÷å å íàïðàâåíà, íî â ìîìåíòà å èçêëþ÷åíà."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Óñòàíîâêàòà âå÷å å íàïðàâåíà è â ìîìåíòà å âêëþ÷åíà."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Íÿìà íàñòðîéâàíî ñïîäåëÿíå íà Èíòåðíåò âðúçêàòà."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Íàñòðîéêà íà ñïîäåëÿíåòî íà Èíòåðíåò âðúçêàòà"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Äîáðå äîøëè â èíñòðóìåíòà çà ñïîäåëÿíå íà Èíòåðíåò âðúçêàòà !\n"
-"\n"
-"%s\n"
-"\n"
-"Öúêíåòå ``Íàñòðîé'', àêî èñêàòå äà ñòàðòèðàíå óñòàíîâÿâàùèÿ ìàãüîñíèê."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Íàñòðîéêà íà ìðåæàòà (%d àäàïòåðà)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Ïðîôèë: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Èçòðîé ïðîôèë ..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Ïðîôèë çà èçòðèâàíå:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Íîâ ïðîôèë ..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Èìå íà ñúçäàâàíèÿ ïðîôèë (íîâèÿò ïðîôèë ñå ñúçäàâà êàòî êîïèå íà òåêóùèÿ):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Èìå íà õîñò:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Èíòåðíåò äîñòúï"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Òèï: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Èíòåðôåéñ:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Ñúñòîÿíèå:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Íàñòðîéêà íà Èíòåðíåò äîñòúïà ..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Íàñòðîéêà íà LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Äðàéâåð"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Èíòåðôåéñ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Ïðîòîêîë"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Ñúñòîÿíèå"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Íàñòîéêà íà ëîêàëíà ìðåæà ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Öúêíåòå òóê, çà äà ñòàðòèðàòå ìàãüîñíèêà ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Ìàãüîñíèê..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Ïðèëîæè"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Ìîëÿ, ïî÷àêàéòå ... Ïðèëàãàíå íà íàñòðîéêèòå"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Ñâúðçàí"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Íå ñâúðçàí"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Ñâúðçâàíå ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Îòâúðçâàíå ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Íÿìàòå íàñòðîåí èíòåðôåéñ.\n"
-"Íàñòðîéòå ãè ïðåäè òîâà, êàòî öúêíåòå íà 'Íàñòðîéêà'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Íàñòðîéêà íà ëîêàëíà ìðåæà"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Àäàïòåð %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Ñòàðòèðàù ïðîòîêîë"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Ïóñíàò ïðè ñòàðòèðàíå"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP êëèåíò"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "àêòèâèðàé ñåãà"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "äåàêòèâèðàé ñåãà"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Íÿìàòå Internet âðúçêà.\n"
-"Ñúçäàéòå òàêàâà, êàòî öúêíåòå íà 'Íàñòðîé'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Íàñòðîéêà íà Èíòåðíåò âðúçêà"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Íàñòðîéêà íà Èíòåðíåò âðúçêà"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Òèï íà âðúçêàòà: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Ïàðàìåòðè"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet êàðòà"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP êëèåíò"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Èçáåðåòå íèâî íà ñèãóðíîñò"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Êîíòðîëåí öåíòúð"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Èçáåðåòå èíñòðóìåíòà, êîéòî èñêàòå äà èçïîëçâàòå"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Êàíàäñêà (Êâåáåê)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Åâðîïà"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Èñëàíäñêà"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Åâðîïà"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "ñåðèéíà"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "óïîòðåáà: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Ìîëÿ, èçáåðåòå ïîäðåæäàíå íà êëàâèàòóðàòà."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Èñêàòå ëè BackSpace äà ïîäàâà Delete íà êîíçîëàòà ?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Ñìÿíà íà CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ìîëÿ, ñëîæåòå Èíñòàëàöèîííèÿ CD-ROM â óñòðîéñòâîòî è íàòèñíåòå Ok, êîãàòî "
-"ñòå ãîòîâè.\n"
-"Àêî ãî íÿìàòå, íàòèñíåòå Îòìÿíà, çà äà èçáåãíåòå èíñòàëèðàíåòî îò òîçè CD-"
-"ROM."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Íå ìîãà äà ïóñíà îáíîâÿâàíåòî !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "ëîãäðåéê"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ôàéë/_Íîâ"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<êîíòðîë>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ôàéë/_Îòâîðè"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<êîíòðîë>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Ôàéë/_Çàïèñ"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<êîíòðîë>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Ôàéë/Çàïèøè _Êàòî"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Ôàéë/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Îïöèè"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Îïöèè/Òåñò"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ïîìîù"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ïîìîù/_Çà..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Ïîòðåáèòåëñêî èìå"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ñúîáùåíèÿ"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "ñèñòåìåí ëîã"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "òúðñè"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Èíñòðóìåíò çà ïðåãëåæäàíå íà âàøèòå ëîã ôàéëîâå"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Íàñòðîéêè"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ñúâïàäåíèå"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "íî íå ñúâïàäà"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Èçáåðåòå ôàéë"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Êàëåíäàð"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Ñúäúðæàíèå íà ôàéëà"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ìîëÿ èç÷àêàéòå, ïðàâÿ ðàçáîð íà ôàéë: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Íàñòðîéêà íà LILO/Grub"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Äîáðå äîøëè â íàñòðîéêàòà íà Proxy.\n"
-"\n"
-"Òóê ùå ìîæåòå äà óñòàíîâèòå âàøèòå HTTP è FTP proxy\n"
-"ñúñ èëè áåç ïîòðåáèòåëñêî èìå è ïàðîëà\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache è Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Èçëåç"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "èíòåðåñåí"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Ôîðìàòèðàíå"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Íàñòðîéêà íà öâåòîâå"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Çàïàçè êàòî..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Ìîëÿ, èçáåðåòå òèï íà ìèøêàòà."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "íå å íàìåðåí serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Äà ñèìóëèðàì ëè òðåòè áóòîí ?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Èçáåðåòå ãðàôè÷íà êàðòà"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Ñòàðòèðàùî óñòðîéñòâî"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Íàñòðîéêà íà Çàùèòíà Ñòåíà"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Íàñòðîéêà íà Çàùèòíà Ñòåíà"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Çàùèòíà ñòåíà\n"
-"\n"
-"Âå÷å ñòå íàñòðîèëè çàùèòíà ñòåíà.\n"
-"Öúêíåòå Íàñòðîé, çà äà óñòàíîâèòå ñòàíäàðòíà çàùèòíà ñòåíà"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Çàùèòíà ñòåíà\n"
-"\n"
-"Öúêíåòå Íàñòðîé, çà äà óñòàíîâèòå ñòàíäàðòíà çàùèòíà ñòåíà"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Èçáîð íà åçèê"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Èçáîð íà êëàñ èíñòàëàöèÿ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Çàñè÷àíå íà äèñêîâåòå"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Íàñòðîéêà íà ìèøêà"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Èçáîð íà êëàâèàòóðà"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Ñèãóðíîñò"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Ôàéëîâè ñèñòåìè"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ôîðìàòèðàíå íà äÿëîâå"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Ïàêåòè çà èíñòàëèðàíå"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Èíñòàëèðàíå íà ñèñòåìàòà"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Äîáàâÿíå íà ïîòðåáèòåë"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Íàñòîéêà íà ìðåæàòà"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Íàñòðîéêà íà óñëóãèòå"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Èíñòàëèðàíå íà bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Ñúçäàâàíå íà boot-äèñêåòà"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Íàñòðîéêà íà Õ"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Èíñòàëèðàíå íà ñèñòåìàòà"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Èçõîä îò èíñòàëàöèîííàòà ïðîãðàìà"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Íàñòðîé÷èê çà ìàëêà çàùèòíà ñòåíà\n"
-"\n"
-"Òîâà íàñòðîéâà ïåðñîíàëíà çàùèòíà ñòåíà çà òàçè Mandrake Linux ìàøèíà.\n"
-"Çà ìîùíî ïîñòâåòåíî íà çàùèòàòà ðåøåíèå, ìîëå, ïîãëåäíåòå ñïåöèàëèçèðàíàòà\n"
-"MandrakeSecurity Firewall äèñòðèáóöèÿ."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ñåãà ùå âè çàäàäåì âúïðîñè çà òîâà, êúì êîè óñëóãè áèõòå èñêàëè äà\n"
-"ïîçâîëèòå íà Èíòåðíåò äà ñâúðçâà. Ìîëÿ, ïîìèñëåòå âíèìàòåëíî ïî\n"
-"òåçè âúïðîñè, òúé êàòî ñèãóðíîñòòà íà êîìïþòúðà âè å âàæíà.\n"
-"\n"
-"Ìîëÿ, àêî â ìîìåíòà íå èçïîëçâàòå íÿêîÿ îò óñëóãèòå, çàùèòåòå ÿ.\n"
-"Ìîæåòå äà ïðîìåíèòå íàñòðîéêàòà ïî âñÿêî âðåìå, àêî èñêàòå, êàòî\n"
-"ñòàðòèðàòå îòíîâî òîâà ïðèëîæåíèå !"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Èçïîëçâàòå ëè Web ñúðâúð íà òàçè ìàøèíà, êîéòî èñêàòå öåëèÿò Èíòåðíåò\n"
-"çà âèæäà ? Àêî èçïîëçâàòå, êîéòî òðÿáâà äà áúäå äîñòúïåí îò òàçè ìàøèíà,\n"
-"ìîæåòå ñïîêîéíî äà îòãîâîðèòå ñ Íå òóê.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Èçïîëçâàòå ëè Name ñúðâúð íà òàçè ìàøèíà ? Àêî íå èñêàòå äà ïðåäîñòàâÿòå\n"
-"èíôîðìàöèÿ çà IP-òà è çîíè íà öåëèÿ Èíòåðíåò, ìîëÿ, îòãîâîðåòå Íå.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Èñêàòå ëè äà ðàçðåøèòå âõîäÿùè Secure SHell (SSH) âðúçêè ? Òîâà å\n"
-"çàìåñòèòåë íà telnet, êîéòî ìîæåòå äà èçïîëçâàòå çà âëèçàíå. Àêî â\n"
-"ìîìåíòà èçïîëçâàòå telnet, îïðåäåëåíî òðÿáâà äà ïðåìèíåòå êúì SSH.\n"
-"Telnet íå å êðèïòèðàí -- òàêà ÷å íÿêîè àòàêóâàùè ìîãàò äà îòêðàäíàò\n"
-"ïàðîëàòà âè, àêî ãî èçïîëçâàòå. SSH å êðèïòèðàí è èçêëþ÷âà òàêàâà\n"
-"èçäúíêà."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Èñêàòå ëè äà ïîçâîëèòå âõîäÿùè telnet âðúçêè ?\n"
-"Òîâà å óæàñíî íåñèãóðíî, êàêòî îáÿñíèõìå â ïðåäèøíèÿ åêðàí. Ñèëíî\n"
-"âè ïðåïîðú÷âàìå äà îòãîâîðèòå Íå òóê è äà èçïîëçâàòå SSH âìåñòî\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Èìàòå ëè FTP ñúðâúð òóê, êîéòî òðÿáâà äà å äîñòúïåí çà Èíòåðíåò ?\n"
-"Àêî èìàòå, ñèëíî âè ïðåïîðú÷âàìå äà ãî èçïîëçâàòå çà àíîíèìíè òðàíñôåðè.\n"
-"Âñè÷êè ïàðîëè èçïðàùàíè ïî FTP ìîãàò äà áúäàò îòêðàäíàòè îò àòàêóâàùà\n"
-"ëè÷íîñò, òúé êàòî FTP íå èçïîëçâà êðèïòîãðàôèÿ çà ïðåõâúðëÿíåòî èì.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Èìàòå ëè ïîùåíñêè ñúðâúð òóê ? Àêî èçïðàùàòå ñúîáùåíèÿòà ñè\n"
-"÷ðåç pine, mutt èëè êàêúâòî è äà å äðóã òåêñòîâ ïîùåíñêè êëèåíò,\n"
-"ìîæå áè èìàòå.  ïðîòèâåí ñëó÷àé, òðÿáâà äà çàùèòèòå òîâà.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Èìàòå ëè POP èëè IMAP ñúðâúð òóê ? Òîâà ìîæå äà áúäå\n"
-"èçïîëçâàíî äà ïðèþòÿâàíå íà íå-web-áàçèðàíè ïîùåíñêè àêàóíòè\n"
-"ïðåç òàçè ìàøèíà.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Ñÿêàø èçïîëçâàòå 2.2 ÿäðî. Àêî ìðåæîâîòî IP àâòîìàòè÷íî ñå\n"
-"îïðåäåëÿ îò êîìïþòúð ó âàñ èëè â îôèñà (äèíàìè÷íî ïîñòàâÿíî),\n"
-"òðÿáâà äà ïîçâîëèì òîâà. Òàêúâ ëè å ñëó÷àÿ ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Âðåìåòî íà êîìïþòúðà âè ñèíõðîíèçèðà ëè ñå ñ äðóã êîìïþòúð ?\n"
-"Òîâà ãëàâíî ñå èçïîëçâà â ñðåäíî-ãîëåìè Unix/Linux îðãàíèçàöèè,\n"
-"çà äà ñè ñèíõðîíèçèðà âðåìåòî çà çàïèñâàíå íà ñòàòóñà è òàêèâà ðàáîòè.\n"
-"Àêî íå ñòå ÷àñò îò ïî-ãîëÿì îôèñ è íå ñòå ÷óâàëè çà òàêîâà íåùî,\n"
-"ìîæå áè íå âè òðÿáâà."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Íàñòðîéêàòà çàâúðøåíà. Äà çàïèøåì ëè ïðîìåíèòå íà äèñêà ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Íå ìîãà äà îòâîðÿ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Íå ìîãà äà îòâîðÿ %s çà çàïèñ: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Íàñòðîéêà íà Çàùèòíà Ñòåíà"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Ìîëÿ, èç÷àêàéòå, ïîäãîòâÿíå íà èíñòàëàöèÿòà"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Ñúðâúð, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ìðåæîâ êîìïþòúð (êëèåíò)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ñúðâúð, SMB ñúðâúð, Proxy ñúðâúð, SSH ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Îôèñ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome ðàáîòíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Èíñòðóìåíòè çà âàøèÿ Palm Pilot èëè Visor-à âè"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Ðàáîòíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Ñúðâúð, Firewall/Ðóòåð"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Èìå íà äîìåéí è Ìðåæîâ Èíôîðìàöèîíåí Ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Îôèñ ïðîãðàìè: word-ïðîöåñîðè (kword, abiword), òàáëèöè (kspread, gnumeric), "
-"ïðåãëåä íà PDF, è ò.í."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Èíñòðóìåíòè çà àóäèî: MP3 èëè MIDI ïëåéúðè, ìèêñåðè, è ò.í. "
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Êíèãè è HOTWO-òà çà Linux è ñâîáîäíèÿ ñîôòóåð"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ðàáîòíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm è ò.í."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Ìóëòèìåäèÿ - Âèäåî"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Íàáîð îò èíñòðóìåíòè çà ïîùà, íîâèíè, web, ôàéëîâ òðàíñôåð, è ÷àò"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Ñúðâúð, Áàçè-äàííè"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL èëè MySQL ñúðâúð çà áàçè-äàííè"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Èíñòðóìåíòè çà óëåñíÿâàíå íàñòðîéêàòà íà êîìïþòúðà âè"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Ìóòèìåäèÿ - Çâóê"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Èíñòðóìåíòè"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Äîêóìåíòàöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Êîíçîëíè èíñòðóìåíòè"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix ïîùåíñêè ñúðâúð, Inn íîâèíàðñêè ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Èíòåðíåò ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Ìóòèìåäèéíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Íàñòðîéêà"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Îùå ãðàôè÷íè desktop-è (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, ïðîñòà ñðåäà ñ êîëåêöèÿ îò ïðèäðóæàâàùè "
-"èíñòðóìåíòè"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ãðàôè÷íà ñðåäà"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache è Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Èíñòðóìåíòè çà ñúçäàâàíå è îïè÷àíå íà CD-òà"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Îôèñíà ðàáîòíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, è ò.í."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Ãðàôè÷íè ïðîãðàìè êàòî The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "FND/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Áèáëèîòåêè çà ðàçðàáîòêà íà C è C++, ïðîãðàìè è include ôàéëîâå"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Ìðåæîâ êîìïþòúð, ñúðâúð"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Ñúðâúð, Ïîùà/Groupware/Íîâèíè"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Èãðàëíà ñòàíöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Âèäåî ïëåéúðè è ðåäàêòîðè"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Ìóëòèìåäèÿ - Ãðàôèêà"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Çàáàâíè ïðîãðàìè: àðêàäíè èãðè, èãðè íà ìàñà, ñòðàòåãèè è ò.í."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Íàáîð îò èíñòðóìåíòè çà ÷åòåíå è èçïðàùàíå íà ïîùà è íîâèíè (pine, mutt, "
-"tin..) è çà îáèêàëÿíå èç Ìðåæàòà"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Àðõèâèðàøè, åìóëàöèÿ, íàáëþäåíèå"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Ëè÷íè ôèíàíñè"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Ãðàôè÷íà ñðåäà ñ ïîòðåáèòåëñêè íàáîð îò ïðèëîæåíèÿ è desktop èíñòðóìåíòè"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Êëèåíòè çà ðàçëè÷íè ïðîòîêîëè âêëþ÷èòåëíî SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Èíòåðíåò gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Ïðîãðàìè çà ïóñêàíå/ïîïðàâÿíå íà çâóê è âèäåî"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Äðóãè ãðàôè÷íè desktop-è"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Ðåäàêòîðè, øåëîâå, ôàéëîâè èíñòðèìåíòè, òåðìèíàëè"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Ïðîãðàìè çà îáðàáîòêà íà ôèíàíñè, êàòî gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Îáðàáîòêà íà ëè÷íà èíôîðìàöèÿ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Ìóëòèìåäèÿ - îïè÷àíå íà CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Íàó÷íà ðàáîòíà ñòàíöèÿ"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Îòêàç"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Íå ìîãà äà îñúùåñòâÿ äîñòúï äî ìîäóëèòå íà ÿäðîòî ñúîòâåòñâàùè íà ÿäðîòî "
-#~ "âè (ôàéëúò %s ëèïñâà)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Íèêàêúâ"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Èçáåðåòå ïðèíòåð ïî ïîäðàçáèðàíå"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Ïðèëàãàíå/Ïðåïðî÷èò íà ïðèíòåðèòå"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Ñåãà ìîæåòå äà ïîäàäåòå îïöèèòå ìó êúì ìîäóëà %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ìîíòèðàíåòî íå óñïÿ"
-
-#~ msgid "Low"
-#~ msgstr "Ñëàáî"
-
-#~ msgid "Medium"
-#~ msgstr "Ñðåäåíî"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Íÿêîè ïîäîáðåíèÿ çà òîâà íèâî íà ñèãóðíîñò. Ãëàâíîòî å, ÷å èìà ïîâå÷å\n"
-#~ "ïðåäóïðåæäåíèÿ è ïðîâåðêè çà ñèãóðíîñò."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Ìóëòèìåäèÿ"
-
-#~ msgid "Boot mode"
-#~ msgstr "Ðåæèì íà ñòàðòèðàíå"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Åêñïåðòíà"
-
-#, fuzzy
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Çà äà âèäèòå ñïèñúê íà äîñòúïíèòå îïöèè çà òåêóùèÿ ïðèíòåð, èëè ïðî÷åòåòå "
-#~ "ñïèñúêà ïîêàçàí ïî-äîëó èëè öúêíåòå íà áóòîíà \"Ñïèñúê ñ îïöèè çà ïå÷àò"
-#~ "\".\n"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux ðàáîòè ñ âðåìå ïî GMT (Âðåìå ïî Ãðèíóè÷)\n"
-#~ "è ãî ïðåâåæäà â ëîêàëíî âðåìå â çàâèñèìîñò îò çîíàòà, êîÿòî ñòå èçáðàëè."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Ñâúðæè ñå êúì Èíòåðíåò"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Îòâúðæè ñå îò Èíòåðíåò"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Íàñòðîéêà íà ìðåæîâàòà âðúçêà (LAN èëè Èíòåðíåò)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Íà êîé äèñê èñêàòå äà ãî ïðåìåñòèòå ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Ìîëÿ, èçáåðåòå ïàêåòèòå, êîèòî èñêàòå äà èíñòàëèðàòå."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Èíôîðìàöèÿ"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome ðàáîòíà ñòàíöèÿ"
-
-#~ msgid "authentification"
-#~ msgstr "óäîñòîâåðÿâàíå"
-
-#~ msgid "user"
-#~ msgstr "ïîòðåáèòåë"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache å World Wide Web (WWW) ñúðâúð. Òîé ñëóæè äà îáðàáîòâà íà HTML "
-#~ "ôàéëîâå\n"
-#~ "è CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) å Domain Name Server (DNS), êîéòî ñå èçïîëçâà äà ïðåâúðíå\n"
-#~ "èìåòî íà õîñòà äî IP àäðåñ."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Ìîëÿ, èçáåðåòå òèï íà ìèøêàòà."
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Òúðñåíå íà äîñòúïíè NFS ñïîäåëåíè ðåñóðñè"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Òúðñåíå çà äîñòúïíè NFS ðåñóðñè íà ñúðâúð %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Ñêàíèðàíå íà äîñòúïíèòå SAMBA ïîäåëåíè ðåñóðñè"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Ñêàíèðàíå íà äîñòúïíèòå SAMBA ïîäåëåíè ðåñóðñè íà ñúðâúð %s"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Èçõîä"
-
-#~ msgid "Removable media"
-#~ msgstr "Ñìåíÿåì íîñèòåë"
-
-#~ msgid "Active"
-#~ msgstr "Àêòèâèðàé"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Íå"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Ïðèíòåð îò ìîäåëà \"%s\", å íàìåðåí íà "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Ëîêàëíî ïå÷àòàùî óñòðîéñòâî"
-
-#~ msgid "Printer Device"
-#~ msgstr "Ïå÷àòàùî óñòðîéñòâî"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Ëèïñâà èìå íà óñòðîéñòâî/ôàéë !"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Ïðèíòåð(è) íà îòäàëå÷åí(è) CUPS ñúðâúð(è)"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Ïðèíòåð(è) íà îòäàëå÷åí(è) ñúðâúð(è)"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Ñèñòåìà"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Äðóãà"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Ìîëÿ, èçáåðåòå ïîäðåæäàíå íà êëàâèàòóðàòà."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Ìîëÿ, öúêíåòå íà íîñèòåëÿ"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Âèä: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Ëîø backup-ôàéë"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Íàñòðîéêà íà Õ"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Ïå÷àòàùî óñòðîéñòâî"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Îòìÿíà"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Çàòâîðè"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Ñòàðòèðàíå íà âðúçêàòà ...."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Çàòâàðÿíå íà âðúçêàòà âè ..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Âðúçêàòà íå å çàòâîðåíà.\n"
-#~ "Îïèòàéòå ñå äà ãî íàïðàâèòå ðú÷íî, êàòî ñòàðòèðàòå\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "êàòî root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Ñèñòåìàòà â ìîìåíòà íå å ñâúðçàíà."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Èçáåðåòå ãîëåìèíàòà, êîÿòî èñêàòå äà èíñòàëèðàòå"
-
-#~ msgid "Total size: "
-#~ msgstr "Îáùà ãîëåìèíà: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Ìîëÿ, èç÷àêàéòå, "
-
-#~ msgid "Total time "
-#~ msgstr "Îáùà ïðîäúëæèòåëíîñò "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Äà èçïîëçâàì ëè ñåãàøíàòà íàñòðîéêà íà X11 ?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Êúäå å ñâúðçàí âàøèÿ ïðèíòåð  \n"
-#~ "(çàáåëåæêà: /dev/lp0 å åêâèâàëåíòíî íà LPT1) ?\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "Âíèìàíèå, ìðåæîâèÿò àäàïòåð âå÷å å íàñòðîåí. Ùå ãî ïðåíàñòðîÿ."
-
-#~ msgid "New"
-#~ msgstr "Íîâ"
-
-#~ msgid "Remote"
-#~ msgstr "Îòäàëå÷åí"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "Ìîëÿ, öúêíåòå íà áóòîíà ïî-ãîðå\n"
-#~ "\n"
-#~ "Èëè èçïîëçâàéòå \"Íîâ\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "Èçïîëçâàéòå \"Íîâ\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "Àêî ñïèñúêúò ïî-ãîðå íå ñúäúðæà èñêàíèÿ åëåìåíò, âúâåäåòå ãî òóê:"
-
-#~ msgid "Shared resource"
-#~ msgstr "Ïîäåëåíè ðåñóðñè"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "..... (%s), áúäåòå ïî-òî÷åí\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (ïî ïîäðàçáèðàíå å %s)"
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Âàøèÿò èçáîð ? (ïî ïîäðàçáèðàíå %s, âúâåäåòå 'none' çà íèêîé)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "íå ìîãà äà îòâîðÿ /etc/sysconfig/autologin çà ÷åòåíå: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Èñêàòå ëè äà ðåñòàðòèðàì ìðåæàòà ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Ñúãëàñíè ëè ñòå ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Íà ïúò ñúì äà ðåñòàðòèðàì ìðåæîâîòî óñòðîéñòâî:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr ""
-#~ "Íà ïúò ñúì äà ðåñòàðòèðàì ìðåæîâîòî óñòðîéñòâî %s. Ñúãëàñíè ëè ñòå ?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Îñâåí àêî íå ñòå ñèãóðíè â îáðàòíîòî, îáèêíîâåíèÿ èçáîð å \"/dev/hda\"\n"
-#~ "(ïúðâè âîäåùî IDE äèñê) èëè \"/dev/sda\" (ïúðâè SCSI äèñê)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Ñëåäíèòå ïðèíòåðè ñà íàñòðîåíè.\n"
-#~ "Ìîæåòå äîáàâèòå îùå èëè äà ïðîìåíèòå ñúùåñòâóâàùèòå."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Àêî ïðîäúëæèòå, ùå ñïðà %s ñðåäàòà âè"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Âíèìàíèå:\n"
-#~ "Ïðèëàãàéêè íà ïðîìåíèå ïî âðåìå íà ðàáîòà ìîæå äà ñúñèïå X ñðåäàòà âè."
-
-#~ msgid "%s is already in use"
-#~ msgstr "Åòèêåòúò %s ñå èçïîëçâà âå÷å"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ìîæå äà ïðè÷èíè çàãóáà íà äàííè)"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Òðÿáâà äà âúâåäåòå êîìàíäåí ðåä !"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Íàñòðîéêà íà ADSL"
-
-#~ msgid "Adapter"
-#~ msgstr "Àäàïòåð"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Äîáàâè ìÿñòî íà ïàêåòèòå"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Ñëåä ôîðìàòèðàíå íà âñè÷êè äÿëîâå,"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Ìîäåì Alcatel"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Ñèãóðíè ëè ñòå, ÷å ñòå åêñïåðò ?\n"
-#~ "Òóê ùå âè áúäàò ïîçâîëåíè ìîùíè, íî îïàñíè íåùà.\n"
-#~ "Àêî Âè áúäå çàäàäåí âúïðîñ: ``Use shadow file for passwords?'',\n"
-#~ "ùå ìîæåòå ëè äà ãî ðàáåðåòå è îòãîâîðèòå?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Àâòîìàòè÷íî èíñòàëèðàíå îò ôëîïè"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Àâòîìàòè÷íè çàâèñèìîñòè"
-
-#~ msgid "Available packages"
-#~ msgstr "Íàëè÷íè ïàêåòè"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Âíèìàíèå, àêî å âêëþ÷åí numlock ìîæå äà äîâåäå äî èçâåæäàíåòî íà\n"
-#~ "÷èñëà âìåñòî áóêâè (íàïðèìåð: íàòèñêàéêè 'p' äàâà '6')"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Íàñòðîéêà íà íà÷èíà íà ñòàðòèðàíå"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Ñòàðòèðàíå íà CUPS"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Íå ìîæå äà èçïîëçâàòå supermount ïðè âèñîêî íèâî íà ñèãóðíîñò"
-
-#~ msgid "Category"
-#~ msgstr "Êàòåãîðèÿ"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "×àò (IRC èëè ìîìåíòíè ñúîáùåíèÿ) ïðîãðàìè êàòî xchat, licq, gaim è "
-#~ "èíñòðóìåíòè çà òðàíñôåð íà ôàéëîâå"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Ïðîâåðÿâàì çàâèñèìîñòèòå"
-
-#~ msgid "Choice"
-#~ msgstr "Èçáîð"
-
-#~ msgid "Choose"
-#~ msgstr "Èçáåðè"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Èçáåðåòå åçèêúò íà êëàâèàòóðàòà âè îò ñïèñúêà ïî-äîëó"
-
-#~ msgid "Collapse all"
-#~ msgstr "Èç÷èñòè âñè÷êî"
-
-#~ msgid "Color depth options"
-#~ msgstr "Îïöèè çà äúëáî÷èíà íà öâåòà"
-
-#~ msgid "Command line"
-#~ msgstr "Êîìàíäåí ðåä"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Èíñòðóìåíòè çà êîìóíèêàöèÿ"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Ñúäúðæàíèåòî íà íàñòðîéâàùèÿ ôàéë íå ìîæå äà áúäå ðàçáðàíî."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Íàñòðîéêà íà Lilo/Grub"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Íàñòðîéêà íà LILO/GRUB"
-
-#~ msgid "Configure local network"
-#~ msgstr "Íàñòîéêà íà ëîêàëíàòà ìðåæà"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Íàñòðîéêà íà Èíòåðíåò âðúçêàòà / Íàñòðîéêà íà ëîêàëíàòà ìðåæà"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Íàñòðîéêà íà ÷àñîâà çîíà"
-
-#~ msgid "Configure..."
-#~ msgstr "Íàñòðîé ..."
-
-#~ msgid "Confirm Password"
-#~ msgstr "Ïîòâúðæäåíèå íà ïàðîëàòà"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Ñâúðçâàíå êúì Èíòåðíåò "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Âðåìå íà âðúçêàòà: "
-
-#~ msgid "Connection complete."
-#~ msgstr "Ñâðúçâàíåòî èçâúðøåíî."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Ñâúðçâàíåòî íå óñïÿ.\n"
-#~ "Ïðîâåðåòå íàñòðîéêàòà â Mandrake Control Center."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Timeout íà âðúçêàòà (â ñåê) [ áåòà, íå å âêàðàíî ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Íå ìîæàõ äà îïðåäåëÿ \"%s\" çà ïîëçâàíå ïî ïîäðàçáèðàíå !"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Ñúçäàâàíå íà boot-äèñêåòà"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ñúçäàâàíåòî íà boot äèñêåòà å ñèëíî ïðåïîðú÷èòåëíî. Àêî íå\n"
-#~ "ìîæåòå äà ñòàðòèðàòå êîìïþòúðà ñè, òîâà å åäèíñòâåíèÿ íà÷èí äà\n"
-#~ "ñïàñèòå ñèñòåìàòà áåç ïðåèíñòàëàöèÿ."
-
-#~ msgid "Customized"
-#~ msgstr "Ñïåöèàëèçèðàíà"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "×åøêà (Ïðîãðàìèñòè)"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Ñúðâúð, DNS/DHCP "
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (èëè ADSL) âðúçêà"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Êëèåíòè è ñúðâúð íà áàçè äàííè (MySQL è PostgreSQL)"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Runlevel ïî ïîäðàçáèðàíå"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Ðàçðàáîòêà íà C/C++"
-
-#~ msgid "Development, Database"
-#~ msgstr "Ðàçðàáîòêà, Áàçè-äàííè"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Ðàçðàáîòêà, Èíòåãðèðàíà ñðåäà"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Ðàçðàáîòêà, Ñòàíäàðòíè èíñòðóìåíòè"
-
-#~ msgid "Directory"
-#~ msgstr "Äèðåêòîðèÿ"
-
-#~ msgid "Disable"
-#~ msgstr "Èçêëþ÷è"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Èçêëþ÷âàíå íà Èíòåðíåò âðúçêà"
-
-#~ msgid "Disable network"
-#~ msgstr "Èçêëþ÷âàíå íà ìðåæàòà"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Îòâúðçâàíå îò Èíòåðíåò "
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Îòâúðçâàíåòî îò Èíòåðíåò èçâúðøåíî."
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Îòâúðçâàíåòî îò Èíòåðíåò íå óñïÿ."
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Èñêàòå ëè äà ñúçäàì àâòîìàòè÷íî èíñòàëèðàùà äèñêåòà çà Linux ðåïëèêàöèÿ?"
-
-#~ msgid "ECI modem"
-#~ msgstr "Ìîäåì ECI"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Èçêàðâàíå ñòðàíèöàòà ñëåä ïå÷àò ?"
-
-#~ msgid "Enable"
-#~ msgstr "Âêëþ÷è"
-
-#~ msgid "Enable network"
-#~ msgstr "Âêëþ÷âàíå íà ìðåæàòà"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Çàäåéñòâàíå Num Lock-à ïðè çàðåæäàíå"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Âñÿêà îïàøêà çà ïå÷àò (êúäåòî ñå íàñî÷âàò ðàáîòèòå çà ïå÷àò) ñå íóæäàå\n"
-#~ "îò èìå (îáèêíîâåíî lp) è spool-äèðåêòîðèÿ ñâúðçâàíà ñ íåÿ. Êîå\n"
-#~ "èìå íà äèðåêòîðèÿ äà áúäå èçïîëçâàíî çà òàçè îïàøêà è êàê ñå ñâúðçàí "
-#~ "ïðèíòåðà ?"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Âñåêè ïðèíòåð ñå íóæäàå îò èìå (íàïðèìåð, \"lp\").\n"
-#~ "Äðóãè ïàðàìåòðè êàòî îïèñàíèå íà ïðèíòåðà èëè ìåñòîïîëîæåíèåòî ìó ìîãàò "
-#~ "äà\n"
-#~ "áúäàò îïðåäåëåíè. Êàêâî èìå äà áúäå èçïîëçâàíî çà òîçè ïðèíòåð è\n"
-#~ "êàê å ñâúðçàí òîé ?"
-
-#~ msgid "Expand all"
-#~ msgstr "Ðàçøèðè âñè÷êî"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Äîïúëíèòåëíè GhostScript îïöèè"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Äîïúëíèòåëíè îïöèè çà òåêñò"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Ñúðâúð, Ôàéëîâ/Ïðèíòåðåí/Samba"
-
-#~ msgid "Find Package"
-#~ msgstr "Íàìåðè ïàêåò"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Íàìåðè ïàêåò ñúäúðæàù ôàéë"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Íàìèðàíå íà ëèñòàòà"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Íàìèðàíåòî íà ëèñòà îòíåìà ìàëêî âðåìå"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Ïúðâè DNS ñúðâúð"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Ïîïðàâêà íà stair-stepping òåêñò ?"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Çà FTP è HTTP, ùå òðÿáâà äà äàäåòå ìÿñòî çà hdlist\n"
-#~ "Òî òðÿáâà äà ïðèëè÷à íà URL-òî îòãîðå"
-
-#~ msgid "Format all"
-#~ msgstr "Ôîðìàòèðàé âñè÷êî"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ìîæå äà ïîääúðæà íÿêîëêî òèïà ïðèíòåðè. Âñåêè îò òåçè òèïîâå\n"
-#~ "èçèñêâà ðàçëè÷íà óñòàíîâêà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî ïðèíòåðúò å ôèçè÷åñêè ñâúðçàí êúì êîìïþòúðà âè, èçáåðåòå \"Ëîêàëåí\n"
-#~ "ïðèíòåð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà îòäàëå÷åíà Unix ìàøèíà, "
-#~ "èçáåðåòå\n"
-#~ "\"Îòäàëå÷åí ïðèíòåð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà îòäàëå÷åíà Microsoft Windows "
-#~ "ìàøèíà\n"
-#~ "(èëè íà Unix ìàøèíà èçïîëçâàùà SMB ïðîòîêîë), èçáåðåòå \"SMB/Windows "
-#~ "95/98/NT\"."
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Äàéòå èìå (íàïð.: `extra', `commercial')"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ïðåìàõâàíå íà çàïèñà %s"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Îáðàáîòêà íà ãðàôèêà"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Êàê èñêàòå äà ñå ñâúðæåòå êúì Èíòåðíåò ?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Íàìåðåõ ISDN êàðòà:\n"
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Àêî íåùî íå å íàðåä ñ íàñòðîéêàòà íà X, èçïîëçâàéòå òåçè îïöèè çà\n"
-#~ "ïðàâèëíà íàñòðîéêà íà X Window ñèñòåìàòà."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Àêî íå ñòå ñèãóðíè äàëè èíôîðìàöèÿòà ïî-ãîðå å âÿðíà\n"
-#~ "èëè àêî íå çíàåòå èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, âÿðíà èíôîðìàöèÿ\n"
-#~ "ìîæå äà áúäå âçåòà îò Èíòåðíåò äîñòàâ÷èêà âè. Àêî íå âúâåäåòå èíôîðìàöèÿ "
-#~ "çà\n"
-#~ "DNS (name server), òÿ ùå áúäå âçåòà îò Èíòåðíåò äîñòàâ÷èêà âè ïî âðåìå "
-#~ "íà\n"
-#~ "ñâúðçâàíå."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Àêî èìàòå âñè÷êè CD-òà îò ñïèñúêà ïî-ãîðå, íàòèñíåòå Ok. Àêî íÿìàòå\n"
-#~ "íèòî åäíî îò òåçè CD-òà, íàòèñíåòå Îòìÿíà. Àêî âè ëèïñâàò íÿêîè CD-òà, "
-#~ "èçêëþ÷åòå ãè,\n"
-#~ "è íàòèñíåòå Ok."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Àêî ïðåäïî÷èòàòå äà èçïîëçâàòå ãðàôè÷íî âëèçàíå, èçáåðåòå \"Äà\". Â\n"
-#~ "ïðîòèâåí ñëó÷àé, èçáåðåòå \"Íå\"."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Àêî ùå èçïîëçâàòå proxy ñúðâúðè, ìîëÿ, íàñòðîéòå ãè ñåãà. Àêî íåçíàåòå,\n"
-#~ "ïîïèòàéòå ìðåæîâèÿ àäìèíèñòðàòîð èëè Èíòåðíåò äîñòàâ÷èêà ñè."
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Àêî èñêàòå äðóãè åçèöè (îñâåí òîçè, êîéòî èçáðàõòå ïðåäè\n"
-#~ "íà÷àëîòî íà èíñòàëàöèÿòà), êîèòî äà áúäàò äîñòúïíè ñëåä èíñòàëàöèÿòà, "
-#~ "ìîëÿ, èçáåðåòå\n"
-#~ "ãè îò ñïèñúêà ïî-ãîðå. Àêî èñêàòå äà ãè èçáåðåòå âñè÷êè, ïðîñòî èçáåðåòå "
-#~ "\"Âñè÷êè\"."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Àêî èñêàòå äà ìîæåòå äà ïå÷àòàòå, ìîëÿ, èçáåðåòå ñèñòåìà çà ïå÷àò "
-#~ "èçìåæäó\n"
-#~ "CUPS è LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS å íîâà, ìîùíà è ãúâêàâà ñèñòåìà çà ïå÷àò çà Unix ñèñòåìè (CUPS\n"
-#~ "ïðîèçëèçà îò \"Îáùà Unix Ïà÷àòíà Ñèñòåìà\"). Òîâà å ñèñòåìàòà çà ïå÷àò ïî "
-#~ "ïîäðàçáèðàíå â\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR å ñòàðàòà ñèñòåìà çà ïå÷àò, èçïîëçâàíà ïðåäèøíèòå Mandrake Linux "
-#~ "äèñòðèáóöèè.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî íÿìàòå ïðèíòåð, öúêíåòå \"Íèêàêúâ\"."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Àêî èñêàòå äà ñâúðæèòå êîìïþòúðà ñè êúì Èíòåðíåò èëè êúì\n"
-#~ "ëîêàëíà ìðåæà, ìîëÿ, èçáåðåòå ïîäõîäÿùàòà îïöèÿ. Ìîëÿ, âêëþ÷åòå "
-#~ "óñòðîéñòâîòî\n"
-#~ "ïðåäè äà èçáåðåòå ïîäõîäÿùàòà îïöèÿ, çà äà ïîçâîëèòå íà DrakX äà ãî "
-#~ "çàñå÷å àâòîìàòè÷íî.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî íÿìàòå íèêàêâà âðúçêà êúì Èíòåðíåò èëè êúì ëîêàëíà ìðåæà, èçáåðåòå\n"
-#~ "\"Èçêëþ÷âàíå íà ìðåæàòà\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èñêàòå äà íàñòðîèòå ìðåæàòà ïî-êúñíî, ñëåä èíñòàëàöèÿòà, èëè ñòå "
-#~ "ïðèêëþ÷èëè ñ íàñòðîéêàòà íà ìðåæàòà, èçáåðåòå \"Ãîòîâî\"."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Àêî ADSL ìîäåìúò âè å Alcatel, èçáåðåòå Alcatel. Èíà÷å, èçáåðåòå ECI."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Àêî ìîäåìúò âè å âúíøåí, ìîæå, âêëþ÷åòå ãî ñåãà, çà äà ïîçâîëèòå íà DrakX "
-#~ "äà ãî çàñå÷å àâòîìàòè÷íî."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Àêî ìðåæàòà âè èçïîëçâà LDAP (èëè NIS) ïîðîòêîë çà àóòîðèçàöèÿ, èçáåðåòå\n"
-#~ "\"LDAP\" (èëè \"NIS\") çà àóòîðèçàöèÿ. Àêî íå çíàåòå, ïîïèòàéòå ìðåæîâèÿ "
-#~ "ñè\n"
-#~ "àäìèíèñòðàòîð.\n"
-#~ "\n"
-#~ "Àêî êîìïþòúðúò âè íå å ñâúðçàí êúì àäìèíèñòðèðàíà ìðåæà, ìîæå áè ùå "
-#~ "èñêàòå\n"
-#~ "äà èçáåðåòå \"Ëîêàëíè ôàéëîâå\" çà àóòîðèçàöèÿ."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Àêî ìðåæàòà âè èçïîëçâà NIS, èçáåðåòå \"Èçïîëçâàé NIS\". Àêî íå çíàåòå,\n"
-#~ "ïîïèòàéòå ìðåæîâèÿ àäìèíèñòðàòîð."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Â êîÿ ñòðàíà ñå íàìèðàòå ?"
-
-#~ msgid "Installed packages"
-#~ msgstr "Èíñòàëèðàíè ïàêåòè"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Èíòåðíåò Èíñòðóìåíòè"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Èíòåðíåò/Ìðåæîâ äîñòúï"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Ãëàâíèòå îïöèè íà LILO è GRUB ñà:\n"
-#~ "  - Boot óñòðîéñòâî: Îïðåäåëÿ èìåòî íà óñòðîéñòâîòî (ò.å. äÿë îò õàðä\n"
-#~ "äèñêà), êîéòî ñúäúðæà boot ñåêòîðà. Èçáåðåòå \"/dev/hda\", îñâåí àêî íå\n"
-#~ "ñòå ñèãóðíè â äðóãî.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Èç÷àêâàíå ïðåäè ñòàðòèðàíå íà ïîäðàçáèðàùèÿ ñå îáðàç: Îïðåäåëÿ "
-#~ "äåñåòèòå\n"
-#~ "îò ñåêóíäàòà, êîèòî çàðåæäàùà ïðîãðàìà äà èç÷àêà ïðåäè ïóñêàíåòî íà "
-#~ "ïúðâèÿ\n"
-#~ "îáðàç. Ïîëåçíî å çà ñèñòåìè, êîèòî ñòàðòèðàò îò äèñêà âåäíàãà ñëåä "
-#~ "âêëþ÷âàíå\n"
-#~ "íà êëàâèàòóðàòà. Çàðåæäàùàòà ïðîãðàìà íå ÷àêà, àêî \"delay\" å\n"
-#~ "ïðîïóñíàò èëè å íóëà.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Âèäåî ðåæèì: Òîâà îïðåäåëÿ òåêñòîâèÿ VGA ðåæèì, êîéòî äà áúäå èçáðàí\n"
-#~ "ïðè íà÷àëíî çàðåæäàíå. Âúçìîæíè ñà ñëåäíèòå ñòîéíîñòè:\n"
-#~ "    * normal: èçáèðà îáèêíîâåí 80x25 òåêñòîâ ðåæèì.\n"
-#~ "\n"
-#~ "    * <number>: èçïîëçâà ñúîòâåòíèÿ òåêñòîâ ðåæèì.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ïî÷èñòâàíå íà \"/tmp\" ïðè çàðåæäàíå: àêî èñêàòå äà ñå èçòðèâàò "
-#~ "âñè÷êè\n"
-#~ "ôàéëîâå è äèðåêòîðèè ñúõðàíÿâàíè â \"/tmp\", êîãàòî çàðåæäàòå ñèñòåìàòà "
-#~ "ñè,\n"
-#~ "èçáåðåòå òàçè îïöèÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Òî÷íî RAM, àêî å íóæíî: çà ñúæàëåíèå, íÿìà ñòàíäàðòåí ìåòîä, äà ñå\n"
-#~ "ïîïèòà BIOS çà îáåìà íà RAM â êîìïþòúðà. Êàòî ïîñëåäñòâèå, GNU/Linux "
-#~ "ìîæå\n"
-#~ "äà íå óñïåå äà çàñå÷å ïðàâèëíî îáåìà íà RAM. Àêî å òàêúâ ñëó÷àÿ, òóê\n"
-#~ "ìîæåòå äà çàäàäåòå òî÷íèÿ îáåì íà RAM. Ìîëÿ, îòáåëåæåòå ÷å îò 2 èëè 4 MB\n"
-#~ "ìåæäó çàñå÷åíàòà è ïðèñúñòâàùàòà RAM å íîðìàëíà."
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Ëîêàëíàòà ìðåæà âå÷å å íàñòðîåíà.\n"
-#~ "Èñêàòå ëè äà:"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Äîïúëíèòåëíè"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Äîïúëíèòåëíè âúïðîñè"
-
-#~ msgid "Modify printer"
-#~ msgstr "Ïîïðàâè ïðèíòåð"
-
-#~ msgid "Name of queue"
-#~ msgstr "Èìå íà îïàøêà"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Èìå íà ñúçäàâàíèÿ ïðîôèë:"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Íàáëþäàâàíå íà ìðåæàòà"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Ìðåæîâ ïðèíòåð 1 (eth0):"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Íÿìà CDROM (íÿìà íèùî â /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Íÿìà ñúâïàäåíèÿ"
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Íå áåøå îòêðèò ìîäåì. Ìîëÿ, ïîñî÷åòå ñåðèéíèÿ ïîðò, êúì êîéòî å ñâúðçàí.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çà èíôîðìàöèÿ, ïúðâèÿò ñåðèåí ïîðò (íàðè÷àí \"COM1\" ïîä Microsoft\n"
-#~ "Windows) ñå íàðè÷à \"ttyS0\" ïîä Linux."
-
-#~ msgid "No more match"
-#~ msgstr "Íÿìà ïîâå÷å ñúâïàäåíèÿ"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ñåãà å âðåìå äà íàñòðîèòå X Window System, êîÿòî å ÿäðîòî íà \n"
-#~ "GNU/Linux GUI (Ãðàôè÷åí Ïîðåáèòåëñêè Èíòåðôåéñ). Çà òàçè öåë òðÿáâà äà\n"
-#~ "íàñòðîèòå âèäåîêàðòàòà è ìîíèòîðà ñè. Ïî-ãîëÿìàòà ÷àñò îò ñòúïêèòå ñà\n"
-#~ "àâòîìàòèçèðàíè, òàêà ÷å ðàáîòàòà âè ìîæå áè ùå ñå ñúñòîè ñàìî îò "
-#~ "ïðîâåðêà\n"
-#~ "êàêâî å íàïðàâåíî è ïðèåìàíåòî íà íàñòðîéêèòå :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Êîãàòî íàñòðîéêàòà çàâúðøè, X ùå áúäå ñòàðòèðàí (îñâåí àêî íå óêàæåòå íà\n"
-#~ "DrakX äà íå ãî ïðàâè), çà äà ïðîâåðèòå äàëè íàñòðîéêèòå âè óñòðîéâàò. "
-#~ "Àêî\n"
-#~ "íå âè óñòðîéâàò, ìîæåòå äà ñå âðúùàòå è äà ãè ïðîìåíÿòå, êîëêîòî ïúòè âè\n"
-#~ "å íåîáõîäèìî."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Ñåãà, ñëåä êàòî Èíòåðíåò âðúçêàòà âè å íàñòðîåíà,\n"
-#~ "êîìïþòúðúò âè ìîæå äà áúäå íàñòðîåí íà ñïîäåëÿ Èíòåðíåò âðúçêàòà ñè.\n"
-#~ "Îòáåëåæåòå: çà òîâà âè òðÿáâà óñòàíîâåí îòäåëåí ìðåæîâ àäàïòåð, çà äà "
-#~ "óñòàíîâèòå âúòðåøíàòà ñè ìðåæà (LAN).\n"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Áðîé ñòðàíèöè çà èçõîäíè ñòðàíèöè"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Îòâàðÿíå íà âðúçêàòà âè ..."
-
-#~ msgid "Other countries"
-#~ msgstr "Äðóãè ñòðàíè"
-
-#~ msgid "Package"
-#~ msgstr "Ïàêåòà"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ðàçìåð íà õàðòèÿòà"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Èçáåðåòå ïðåäïî÷èòàí åçèê çà èíñòàëàöèÿ è ñèñòåìíî èçïîëçâàíå."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Ìîëÿ, èçáåðåòå ïîäõîäÿùè çà ïðèíòåðà âè íàñòîéêè.\n"
-#~ "Ìîëÿ, ïîãëåäíåòå äîêóìåíòàöèÿòà, àêî íå çíàåòå êàêâî äà èçáåðåòå òóê.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ùå ìîæåòå äà èçïðîáâàòå íàñòðîéêàòà â ñëåäâàùàòà ñòúïêà è äà ÿ ñìåíèòå, "
-#~ "àêî íå ðàáîòè êàêòî òðÿáâà."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Ìîëÿ, èçïðàòåòå ñëåäíàòà èíôîðìàöèÿ"
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Ìîëÿ, âêëþ÷åòå ìîäåìà ñè è èçáåðåòå ïîäõîäÿùèÿ."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Ìîëÿ, âêëþ÷åòå ïðèíòåðà ñè ïðåäè äà ïðîäúëæèòå, çà äà ïîçâîëèòå íà DrakX "
-#~ "äà\n"
-#~ "ãî çàñå÷å.\n"
-#~ "\n"
-#~ "Òðÿáâà äà âúâåäåòå íÿêàêâà èíôîðìàöèÿ òóê.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Èìå íà ïðèíòåð: ïî ïîäðàçáèðàíå, ïå÷àòíèÿ spooler èçïîëçâà \"lp\" "
-#~ "êàòî èìå íà ïðèíòåð. Òàêà ÷å òðÿáâà äà èìàòå\n"
-#~ "ïðèíòåð íàðå÷åí \"lp\".\n"
-#~ "     Àêî èìàòå ñàìî åäèí ïðèíòåð, ìîæåòå äà èçïîëçâàòå íÿêîëêî èìåíà çà "
-#~ "íåãî. Òðÿáâà ñàìî äà ãè îòäåëèòå ñ pipe\n"
-#~ "     ñèìâîëà (\"|\"). Òàêà ÷å, àêî ïðåäïî÷èòàòå ïî-ñìèñëåíî èìå, ìîæåòå "
-#~ "äà ãî ñëîæèòå ïúðâî, íàïð. \"My printer|lp\".\n"
-#~ "     Ïðèíòåðúò ñúäúðæàù \"lp\" â èìåòî(àòà) ñè ùå ñå ïîëçâà ïî "
-#~ "ïîäðàçáèðàíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Îïèñàíèå: Òîâà å íåçàäúëæèòåëíî, íî ìîæå äà å ïîëåçíî, àêî èìà "
-#~ "íÿêîëêî ïðèíòåðà ñâúðçàíè êúì êîìïþòúðà âè èëè àêî\n"
-#~ "     ðàçðåøàâàòå äîñòúï äî íåãî íà äðóãè êîìïþòðè.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ìåñòîïîëîæåíèå: àêî èñêàòå äà äàäåòå èíôîðìàöèÿ çà ìåñòîïîëîæåíèåòî\n"
-#~ "     íà ïðèíòåðà ñè, íàïðàâåòå ãî òóê (ìîæåòå äà íàïèøåòå êàêâîòî ñè "
-#~ "èñêàòå,\n"
-#~ "     íàïðèìåð \"2-ðè åòàæ\").\n"
-
-#~ msgid "Press next to continue."
-#~ msgstr "Íàòèñíåòå Ñëåäâàù, çà äà ïðîäúëæèòå."
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Ïå÷àòàé òåêñòà êàòî PostScript ?"
-
-#~ msgid "Profile "
-#~ msgstr "Ïðîôèë "
-
-#~ msgid "Provider dns 1"
-#~ msgstr "1-âè DNS íà äîñòàâ÷èêà"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "2-ðè DNS íà äîñòàâ÷èêà"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, áèáëèîòåêè, èíñòðóìåíòè"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ñêîðîñò íà ïðèåìàíå: "
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Ïðåíàñòðîé èçïîëçâàéêè ìàãüîñíèê ..."
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Reload"
-#~ msgstr "Ïðåçàðåæäàíå"
-
-#~ msgid "Remote queue"
-#~ msgstr "Îòäàëå÷åíî èìå íà îïàøêà"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Ëèïñâà èìå íà îïàøêàòà !"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Îáúðíè ðåäà íà ñòðàíèöèòå"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Äåñåí/Ëÿâ úãúë â òî÷êè (1/72 íà èí÷)"
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO å bootloader çà SPARC: òoé ìîæå äà ñòàðòèðà\n"
-#~ "GNU/Linux èëè êîÿ äà å äðóãà îïåðàöèîííà ñèñòåìà, ñúùåñòâóâàùà íà "
-#~ "êîìïþòúðà âè.\n"
-#~ "Îáèêíîâåííî, òåçè äðóãè îïåðàöèîííè ñèñòåìà ñå çàñè÷àò è èíñòàëèðàò\n"
-#~ "ïðàâèëíî. Àêî òîâà íå ñòàâà ïðè âàñ, ìîæåòå äà äîáàâÿòå çàïèñè íà ðúêà â\n"
-#~ "òîçè åêðàí. Ãëåäàéòå äà èçáåðåòå âåðíè ïàðàìåòðè.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ìîæå äà íå èñêàòå äà äàâàòå äîñòúï äî òåçè îïåðàöèîííè ñèñòåìè íà íèêîé,\n"
-#~ "â êîéòî ñëó÷àé ìîæåòå äà èçòðèåòå ñúîòâåòíèòå çàïèñè. Íî â òàêúâ ñëó÷àé,\n"
-#~ "ùå ñå íóæäàåòå îò boot-äèñêåòà, çà äà ãè ñòàðòèðàòå !"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Ãëàâíèòå îïöèè íà SILO ñà:\n"
-#~ "  - bootloader èíñòàëàöèÿ: ïîêàçâà, êúäåòî èñêàòå äà ïîñòàâèòå "
-#~ "èíôîðìàöèÿòà\n"
-#~ "íåîáõîäèìà çà ñòàðòèðàíåòî íà GNU/Linux. Îñâåí àêî íå çíàåòå òî÷íî êàêâî\n"
-#~ "ïðàâèòå, èçáåðåòå \"Ïúðâè ñåêòîð íà óñòðîéñòâîòî (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Èç÷àêâàíå ïðåäè ñòàðòèðàíå íà ïîäðàçáèðàùèÿ ñå îáðàç: Îïðåäåëÿ "
-#~ "äåñåòèòå\n"
-#~ "îò ñåêóíäàòà, êîèòî çàðåæäàùà ïðîãðàìà äà èç÷àêà ïðåäè ïóñêàíåòî íà "
-#~ "ïúðâèÿ\n"
-#~ "îáðàç. Ïîëåçíî å çà ñèñòåìè, êîèòî ñòàðòèðàò îò äèñêà âåäíàãà ñëåä êàòî\n"
-#~ "ñå âêëþ÷è êëàâèàòóðàòà. Çàðåæäàùàòà ïðîãðàìà íå ÷àêà, àêî \"delay\" å\n"
-#~ "ïðîïóñíàò èëè å íóëà."
-
-#~ msgid "Sciences"
-#~ msgstr "Íàóêè"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Íàó÷íè ïðèëîæåíèÿ"
-
-#~ msgid "Search"
-#~ msgstr "Òúðñè"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Âòîðè DNS ñúðâúð"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Èçáåðåòå âðúçêà êúì îòäàëå÷åíèÿ ïðèíòåð"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Èçáåðåòå ðàçìåðà, êîéòî èñêàòå äà èíñòàëèðàì"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Èçáåðåòå:\n"
-#~ "\n"
-#~ "  - Ñïåöèàëèçèðàíà: Àêî ñòå äîñòàòú÷íî çàïîçíàò ñ GNU/Linux, ùå ìîæåòå äà "
-#~ "èçáåðåòå\n"
-#~ "    ãëàâíîòî ïðåäíàçíà÷åíèå íà ìàøèíàòà ñè. Âèæòå ïî-äîëó çà "
-#~ "ïîäðîáíîñòè.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Åêñïåðòíà: Òîâà ïðåäïîëàãà, ÷å ñòå íà \"òè\" ñ GNU/Linux è èñêàòå äà\n"
-#~ "    íàïðàâèòå âèñîêî ñïåöèàëèçèðàíà èíñòàëàöèÿ. Êàêòî è â "
-#~ "\"Ñïåöèàëèçèðàíèÿ\"\n"
-#~ "    èíñòàëàöèîíåí êëàñ, ùå ìîæåòå äà èçáåðåòå óïîòðåáàòà íà ñèñòåìàòà "
-#~ "ñè.\n"
-#~ "    Íî ìîëÿ, ìîëÿ, ÍÅ ÈÇÁÈÐÀÉÒÅ ÒÎÂÀ, ÎÑÂÅÍ ÀÊÎ ÍÅ ÇÍÀÅÒÅ ÊÀÊÂÎ ÏÐÀÂÈÒÅ!"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Èçáåðåòå ãîëåìèíà %d%s"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Ñêîðîñò íà èçïðàùàíå: "
-
-#~ msgid "Show only leaves"
-#~ msgstr "Ïîêàæè ñàìî ëèñòàòà"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Ñëîâàøêà (Ïðîãðàìèñòè)"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Ñúæåëÿâàì, íàñòðîéêàòà íà ïîùàòà îùå íå å âúâåäåíà. Áúäåòå òúðïåëèâè."
-
-#~ msgid "Sort by"
-#~ msgstr "Ñîðòèðàé ïî"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spool-äèðåêòîðèÿ"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Statistics"
-#~ msgstr "Ñòàòèñòèêè"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Èçïðîáâàéòå ìèøêàòà ñè òóê."
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux å ðàçïîëîæåí íà íÿêîëêî CDROM-à. Ìîæå äà ñå îêàæå, ÷å "
-#~ "DrakX\n"
-#~ "å èçáðàë ïàêåòè íà CDROM, ðàçëè÷åí îò èíñòàëàöèîííèÿ CDROM, è, êîãàòî ìó\n"
-#~ "ïîòðÿáâà äà ãî ñëîæèòå â óñòðîéñòâîòî, òîé ùå èçêàðà òåêóùèÿ CDROM è ùå "
-#~ "âè\n"
-#~ "ïîèñêà äðóã."
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ñëåäíèòå ïàêåòè ùå áúäàò äåèíñòàëèðàíè"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Òîçè ñòàðòîâ ñêðèïò ñå îïèòâà äà çàðåäè ìîäóëè usb ìèøêàòà âè."
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Çà ïî-ñèãóðíà ñèñòåìà, òðÿáâà äà èçáåðåòå \"Èçïîëçâàé shadow ôàéë\"\n"
-#~ "è \"Èçïîëçâàé MD5 ïàðîëè\"."
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Ïðåâêëþ÷âàíå ìåæäó Èíñòàëèðàí è Íàëè÷åí"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Ãîðåí/Äîëåí úãúë â òî÷êè (1/72 íà èí÷)"
-
-#~ msgid "Tree"
-#~ msgstr "Äúðâî"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Äà ñå îïèòàì ëè äà îòêðèÿ ìîäåì ?"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL íà äèðåêòîðèÿòà ñúäúðæàùà RPM"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Îïöèè çà Uniprint äðàéâåð"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Íåðàçïîçíàò íàñòðîéâàù ôàéë"
-
-#~ msgid "Update location"
-#~ msgstr "Îáíîâè ìÿñòîòî"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Îáíîâÿâàíå íà RPM áàçàòà"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Èçïîëçâàé MD5 ïàðîëè"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Èçïîëçâàé diskdrake"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Èçïîëçâàé shadow ôàéë"
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Äîáðå äîøëè â Ìàãüîñíèêà çà ìðåæîâà íàñòðîéêà.\n"
-#~ "Êîè êîìïîíåíòè èñêàòå äà íàñòðîèòå ?\n"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Êàêâî òúðñÿò?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Çà êàêâî ñå óïîòðåáÿâà ñèñòåìàòà âè ?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Êàêâà ïðîãðàìà çà íà÷àëíî çàðåæäàíå èñêàòå äà èçïîëçâàòå?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Êîé ôàéë òúðñèòå?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Êîé ïàêåò òúðñÿò"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Êúì êîé ñåðèåí ïîðò å ñâúðçàíà ìèøêàòà âè ?"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Ñ îòäàëå÷åí CUPS ñúðâúð, íå âè ñå íàëàãà äà íàñòðîéâàòå êàêúâòî\n"
-#~ "è äà áèëî ïðèíòåð òóê; ïðèíòåðèòå ñàìè ùå áúäàò çàñå÷åíè,\n"
-#~ "îñâåí àêî íÿìàòå ñúðâúð íà äðóãà ìðåæà; â ïîñëåäíèÿ ñëó÷àé,\n"
-#~ "ùå òðÿáâà äà ïðåäîñòàâèòå IP àäðåñ è åâåíòóàëíî ïîðò íà\n"
-#~ "CUPS ñúðâúðà."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Çàïèøè /etc/fstab"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Äà, îòïå÷àòàé ASCII òåñòîâà ñòðàíèöà"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Äà, îòïå÷àòàé PostScript òåñòîâà ñòðàíèöà"
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Ìîæåòå äà èçáåðåòå íèâî íà ñèãóðíîñò íà ñèñòåìàòà ñè. Ìîëÿ, îáúðíåòå ñå "
-#~ "êúì ðúêîâîäñòâîòî çà\n"
-#~ "èíôîðìàöèÿ. Íàêðàòêî, àêî íå çíàåòå êàêâî äà èçáåðåòå, îñòàâåòå òîâà ïî "
-#~ "ïîäðàçáèðàíå.\n"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Ìîæåòå äà íàñòðîèòå ëîêàëåí ïðèíòåð (ñâúðçàí êúì ìàøèíàòà âè) èëè "
-#~ "îòäàëå÷åí\n"
-#~ "ïðèíòåð (äîñòúïåí ÷ðåç Unix, Netware èëè Microsoft Windows ìðåæà)."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Ìîæåòå äà èíñòàëèðàòå êðèïòîãðàôñêè ïàêåòè, àêî Èíòåðíåò âðúçêàòà âè å\n"
-#~ "íàòðîåíà êàêòî òðÿáâà. Ïúðâî èçáåðåòå îãëåäàëåí ñàéò, îò êúäåòî èçêàòå äà "
-#~ "èçòåãëÿòå\n"
-#~ "ïàêåòè, ñëåä òîâà ìàðêèðàéòå ïàêåòèòå çà èíñòàëèðàíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Îòáåëåæåòå, ÷å òðÿáâà äà èçáåðåòå îãëåäàëåí ñàéò è êðèïòîãðàôñêè ïàêåòè,\n"
-#~ "ñúîáðàçíî âàøåòî çàêîíîäàòåëñòâî."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà èçáåðåòå ïîîòäåëíî âñè÷êè ïàêåòè, êîèòî\n"
-#~ "èñêàòå äà èíñòàëèðàòå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ìîæåòå äà ðàçøèðèòå èëè ñâèåòå äúðâîòî, êàòî öúêíåòå íà îïöèèòå â ëåâèÿ "
-#~ "úãúë\n"
-#~ "íà ïðîçîðåöà ñ ïàêåòèòå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî ïðåäïî÷èòàòå äà âèäèòå ïàêåòèòå ïîäðåäåíè â àçáó÷åí ðåä, öúêíåòå íà\n"
-#~ "èêîíàòà \"Ïðåâêëþ÷âàíå ìåæäó íåñîðòèðàíè è ñîðòèðàíè ïî ãðóïè\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî íå èñêàòå äà áúäåòå ïðåäóïðåæäàâàíè çà çàâèñèìîñòè, öúêíåòå "
-#~ "\"Àâòîìàòè÷íè çàâèñèìîñòè\".\n"
-#~ "Àêî íàïðàâèòå òîâà, îòáåëåæåòå ÷å èçêëþ÷âàíåòî íà åäèí ïàêåò ìîæå "
-#~ "òèõîìúëêîì\n"
-#~ "äà èçêëþ÷è íÿêîè äðóãè ïàêåòè, êîèòî çàâèñÿò îò íåãî."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå root ïàðîëàòà íà Mandrake Linux ñèñòåìàòà.\n"
-#~ "Ïàðîëàòà òðÿáâà äà áúäå âúâåäåäà äâà ïúòè çà ïðîâåðêà, ÷å ïàðîëèòå ñà "
-#~ "èäåíòè÷íè.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root å ñèñòåìíèÿò àäìèíèñòðàòîð èëè åäèíñòâåíèÿ ïîòðåáèòåë, íà êîéòî å "
-#~ "ïîçâîëåíî\n"
-#~ "äà ïîïðàâÿ íàñòðîéâàùèòå ôàéëîâå. Çàòîâà èçáåðåòå ïàðîëàòà âíèìàòåëíî.\n"
-#~ "Íåïîçâîëåíà óïîòðåáà íà root àêàóíòà ìîæå äà áúäå èçêëêþ÷èòåëíî îïàñíî çà "
-#~ "öåëîñòòà\n"
-#~ "íà ñèñòåìàòà, äàííèòå è è äðóãèòå ñèñòåìè ñâúðçàíè êúì íåÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïàðîëàòà òðÿáâà äà å ñìåñèöà îò àçáó÷íè ñèìâîëè è äà å äúëãà íàé-ìàëêî 8\n"
-#~ "ñèìâîëà. Íèêîãà íå òðÿáâà äà ñè ÿ çàïèñâàòå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Íå ïðàâåòå ïàðîëàòà ïðåêàëåíî äúëãà èëè ñëîæíà, âúïðåêè òîâà: òðÿáâà äà "
-#~ "ìîæåòå\n"
-#~ "äà ÿ çàïîìíèòå áåç ìíîãî óñèëèÿ."
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà èçáåðåòå íÿêîè äîïúëíèòåëíè îïöèè çà ñèñòåìàòà ñè.\n"
-#~ "\n"
-#~ "* Èçïîëçâàíå îïòèìèçàöèè çà òâúðäèÿ äèñê: òàçè îïöèÿ ìîæå äà ïîäîáðè "
-#~ "ðàáîòàòà íà òâúðäèÿ âè äèñêà, íî å ñàìî çà íàïðåäíàëè\n"
-#~ "  ïîòåðåáèòåëè: íÿêîè íåäîäÿëàíè ÷èïñåòè ìîãàò äà ñúñèïÿò äàííèòå âè, "
-#~ "òàêà ÷å âíèìàâàéòå. Îòáåëåæåòå, ÷å ÿäðîòî èìà\n"
-#~ "  âãðàäåí ÷åðåí ñïèñúê îò óñòðîéñòâà è ÷èïñåòè, íî, àêî èñêàòå äà "
-#~ "èçáåãíåòå ëîøè èçíåíàäè, îñòàâåòå òàçè îïöèÿ èçêëþ÷åíà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Èçáåðåòå íèâî íà ñèãóðíîñò: ìîæåòå äà èçáåðåòå íèâî íà ñèãóðíîñò çà "
-#~ "ñèñòåìàòà\n"
-#~ "  ñè. Ìîëÿ, îáúðíåòå ñå êúì ðúêîâîäñòâîòî çà ïúëíà èíôîðìàöèÿ. Ïðîñòî, "
-#~ "àêî\n"
-#~ "  íå çíàåòå êàêâî äà èçáåðåòå, îñòàâåòå òîâà ïî ïîäðàçáèðàíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Òî÷íî RAM, àêî å íóæíî: çà ñúæàëåíèå, íÿìà ñòàíäàðòåí ìåòîä, äà ñå "
-#~ "ïîïèòà BIOS çà îáåìà íà RAM â êîìïþòúðà. Êàòî\n"
-#~ "  ïîñëåäñòâèå, GNU/Linux ìîæå äà íå óñïåå äà çàñå÷å ïðàâèëíî îáåìà íà "
-#~ "RAM. Àêî å òàêúâ ñëó÷àÿ, òóê ìîæåòå äà\n"
-#~ "  çàäàäåòå òî÷íèÿ îáåì íà RAM. Ìîëÿ, îòáåëåæåòå ÷å îò 2 èëè 4 MB ìåæäó "
-#~ "çàñå÷åíàòà è ïðèñúñòâàùàòà RAM å íîðìàëíà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Àâòîìàòè÷íî ìîíòèðàíå íà ïðåíîñèìè óñòðîéñòâà: àêî ïðåäïî÷èòàòå äà íå "
-#~ "ìîíòèðàòå ðú÷íî ïðåíîñèìè óñòðîéñòâà (CD-ROM,\n"
-#~ "  ôëîïè, Zip è ò.í.) ïèøåéêè \"mount\" è \"umount\", èçáåðåòå òàçè "
-#~ "îïöèÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ïî÷èñòâàíå íà \"/tmp\" ïðè çàðåæäàíå: àêî èñêàòå äà ñå èçòðèâàò âñè÷êè "
-#~ "ôàéëîâå è äèðåêòîðèè ñúõðàíÿâàíè â \"/tmp\",\n"
-#~ "  êîãàòî çàðåæäàòå ñèñòåìàòà ñè, èçáåðåòå òàçè îïöèÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Âêëþ÷âàíå íà NumLock ïðè çàðåæäàíå: àêî èñêàòå äà ñå âêëþ÷âà NumLock "
-#~ "ïðè ñòàðòèðàíå, èçáåðåòå òàçè îïöèÿ. Ìîëÿ, îòáåëåæåòå ÷å\n"
-#~ "  íå òðÿáâà äà âêëþ÷âàòå òàçè îïöèÿ ïðè ëàïòîïè è ÷å ìîæå è äà íå ðàáîòè "
-#~ "ïîä X)."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ñåãà ìîæåòå äà ïîñî÷èòå âðåìåâàòà çîíà ñïðÿìî ìåñòîæèâååíåòî ñè."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà èçïðîáâàòå ìèøêàòà ñè. Èçïîëçâàéòå áóòîíà è òîï÷åòî, çà "
-#~ "äà\n"
-#~ "ïðîâåðèòå äàëè íàñòðîéêèòå ñà íàðåä. Àêî íå, ìîæåòå äà öúêíåòå \"Îòìÿíà"
-#~ "\",\n"
-#~ "çà äà èçáåðåòå äðóã äðàéâåð."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà èçïðîáâàòå ìèøêàòà ñè. Èçïîëçâàéòå áóòîíèòå è êîëåëöåòî, "
-#~ "çà\n"
-#~ "äà ïðîâåðèäà äàëè íàñòðîéêèòå ñà íàðåä. Àêî íå ñà, öúêíåòå íà \"Îòêàç\", "
-#~ "çà\n"
-#~ "äà èçáåðåòå äðóã äðàéâåð.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èíñòàëèðàòå íà Apple ìàøèíà ñ åäíîáóòîííà ìèøêà, ùå èìàòå âúçìîæíîñò "
-#~ "äà\n"
-#~ "îïðåäåëèòå êëàâèøè îò êëàâèàòóðàòà, äà ñèìóëèðàò 2-ðè è 3-òè áóòîí íà\n"
-#~ "ìèøêàòà. Òîâà ùå âè äàäå äîñòúï äî ïúëíàòà ôóíêöèîíàëíîñò íà ìèøêàòà â "
-#~ "Linux\n"
-#~ "êîíçîëàòà, è â X Windows GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "Àêî èìàòå ADB ìèøêà, ìîëÿ, èçáåðåòå USB, òúé êàòî Linux ÿäðîòî ùå ñå "
-#~ "ïîãðèæè\n"
-#~ "äà èçïîëçâà ìèøêàòà êàêòî òðÿáâà."
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Ìîæåòå äà îïðåäåëèòå íàïðàâî URI çà äîñòúï äî ïðèíòåðà ñ CUPS."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà íàñòðîèòå ìðåæîâîòî ñè óñòðîéñòâî.\n"
-#~ "\n"
-#~ "  * IP àäðåñ: àêî íå çíàåòå èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, "
-#~ "ïîïèòàéòå ìðåæîâèå ñè àäìèíèñòðàòîð.\n"
-#~ "    Íå òðÿáâà äà âúâåæäàòå IP àäðåñ, àêî èçáåðåòå îïöèÿòà \"Àâòîìàòè÷íî IP"
-#~ "\", ïî-äîëó.\n"
-#~ "\n"
-#~ "  * Ìðåæîâà ìàñêà: \"255.255.255.0\" îáèêíîâåííî å äîáúð èçáîð. Àêî íå "
-#~ "çíàåòå èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, ïîïèòàéòå ìðåæîâèÿ ñè "
-#~ "àäìèíèñòðàòîð.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Àâòîìàòè÷íî IP: Àêî ìðåæàòà âè èçïîëçâà BOOTP èëè DHCP ïðîòîêîë, "
-#~ "èçáåðåòå òàçè îïöèÿ. Àêî å èçáåðàíà, íå ñå íóæäàåòå\n"
-#~ "    îò ñòîéíîñò çà \"IP àäðåñ\". Àêî íå çíàåòå èëè íå ñòå ñèãóðíè êàêâî "
-#~ "òðÿáâà äà âúâåäåòå, ïîïèòàéòå ìðåæîâèÿ ñè àäìèíèñòðàòîð."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà ñúçäàäåòå åäèí èëè ïîâå÷å \"îáèêíîâåíè\" ïîòðåáèòåëñêè\n"
-#~ "àêàóíòè, êàòî ïðîòèâîïîëîæíîñò íà \"ïðèâèëåãèðîâàíèÿ\" ïîòðåáèòåëñêè\n"
-#~ "àêàóíò \"root\". Ìîæåòå äà ñúçäàäåòå ïî åäèí èëè ïîâå÷å çà âñåêè, êîéòî\n"
-#~ "áèõòå èñêàëè äà ïîëçâà êîìïþòúðà âè. Îòáåëåæåòå ÷å âñåêè àêàóíò ùå èìà\n"
-#~ "ñâîèòå ïðåäïî÷èòàíèÿ (ãðàôè÷íà ñðåäà, ïðîãðàìíè íàñòðîéêè è ò.í.)\n"
-#~ "è äà íàñòðîè ñâîÿòà \"Home\" äèðåêòîðèÿ, êúäåòî äà çàïèñâà òåçè\n"
-#~ "ñâîè ïðåäïî÷èòàíèÿ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïúðâî ñúçäàéòå àêàóíò çà ñåáå ñè. Äàæå è äà ñòå åäèíñòâåíèÿò ïîòðåáèòåë,\n"
-#~ "èçïîëçâàíåòî íà àäìèíèñòðàòîðñêèÿ àêàóíò çà âñåêèäíåâíà óïîòðåáà å "
-#~ "îïàñíî.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çàòîâà âëèçàéòå ñ ïîòðåáèòåëñêèÿ ñè àêàóíò â ñèñòåìàòà è, ñàìî àêî âè ñå\n"
-#~ "íàëîæè, èçïîëçâàéòå àäìèíèñòðàòîðñêèÿ àêàóíò."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå dialup îïöèèòå. Àêî íå çíàåòå\n"
-#~ "èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, ïîäõîäÿùà èíôîðìàöèÿ ìîæå äà áúäå "
-#~ "âçåòà\n"
-#~ "îò Èíòåðíåò äîñòàâ÷èêà âè. Àêî íå âúâåäåòå èíôîðìàöèÿ çà DNS (name "
-#~ "server)\n"
-#~ "òóê, òàçè èíôîðìàöèÿ ùå áúäå âçåòà Èíòåðíåò äîñòàâ÷èêà âè ïî âðåìå íà\n"
-#~ "ñâúðçâàíå."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå îïöèèòå çà íàáèðàíå. Àêî íå ñòå ñèãóðíè,\n"
-#~ "ïðàâèëíà èíôîðìàöèÿ ìîæåòå äà ïîëó÷èòå îò Èíòåðíåò äîñòàâ÷èêà ñè."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå èìåòî íà õîñòà ñè. Àêî íå çíàåòå\n"
-#~ "èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, ïîïèòàéòå ìðåæîâèÿ ñè àäìèíèñòðàòîð."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå èìåòî íà õîñòà ñè, àêî òðÿáâà. Àêî\n"
-#~ "íå çíàåòå èëè íå ñòå ñèãóðíè êàêâî äà âúâåäåòå, îñòàâåòå ãî ïðàçíî."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå äà âúâåäåòå èìåòî íà õîñòà ñè, àêî âè òðÿáâà. Àêî íå\n"
-#~ "çíàåòå èëè íå ñòå ñèãóðíè êàêâî òðÿáâà äà âúâåäåòå, ñ ïðàâèëíà "
-#~ "èíôîðìàöèÿ\n"
-#~ "ìîæåòå äà ñå ñäîáèåòå îò Èíòåðíåò äîñòàâ÷èêà ñè."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ñåãà ìîæåòå ñà ìàðêèðàòå ãðóïà ïàêåòè, êîÿòî èñêàòå äà\n"
-#~ "èíñòàëèðàòå èëè îáíîâèòå.\n"
-#~ "\n"
-#~ "DrakX ùå ïðîâåðè äàëè èìàòå äîñòàòú÷íî ìÿñòî çà èíñòàëèðàíåòî èì. Àêî "
-#~ "íÿìàòå,\n"
-#~ "òîé ùå âè ïðåäóïðåäè çà òîâà. Àêî èñêàòå äà ïðîäúëæèòå âúïðåêè òîâà, ùå "
-#~ "ïðîäúëæè\n"
-#~ "èíñòàëàöèÿòà íà âñè÷êè ìàðêèðàíè ãðóïè, íî ùå ïðîïóñíå ïî-ìàëîâàæíèòå "
-#~ "ïàêåòè.\n"
-#~ "Â äúíîòî íà ñïèñúêà ìîæåòå äà ìàðêèðàòå îïöèÿòà \"Èíäèâèäóàëåí èçáîð íà "
-#~ "ïàêåòè\";\n"
-#~ "â òîçè ñëó÷àé, ùå òðÿáâà äà îáõîäèòå ïîâå÷å îò 1000 ïàêåòà ..."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t  will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ñåãà òðÿáâà äà îïðåäåëèòå ïðåäíàçíà÷åíèåòî íà ìàøèíàòà ñè. Âúçìîæíîñòèòå "
-#~ "ñà:\n"
-#~ "\n"
-#~ "\t* Ðàáîòíà ñòàíöèÿ: òîâà å èäåàëíèÿ èçáîð, àêî âúçíàìåðÿâàòå äà "
-#~ "èçïîëçâàòå ìàøèíàòà ñè ãëàâíî çà åæåäíåâíà óïîòðåáà â\n"
-#~ "\t  îôèñà èëè ó äîìà.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Ðàçðàáîòêà: àêî âúçíàìåðÿâàòå äà èçïîëçâàòå ìàøèíàòà ñè ãëàâíî çà "
-#~ "ðàçðàáîòêà íà ñîôóåð, òîâà å äîáúð èçáîð.\n"
-#~ "\t  Òîãàâà ùå èìàòå èíñòàëèðàí ïúëåí íàáîð îò ñîôòóåð, çà äà êîìïèëèðàòå, "
-#~ "îòêðèâàòå áúãîâå è ôîðìàòèðàòå èçõîäåí êîä,\n"
-#~ "\t  èëè äà ñúçäàâàòå ñîôóåðíè ïàêåòè.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Ñúðâúð: àêî âúçíàìåðÿâàòå äà èçïîëçâàòå òàçè ìàøèíà çà ñúðâúð, òîâà å "
-#~ "äîáðèÿò èçáîð. Âêëþ÷âà ôàéëîâ ñúðâúð\n"
-#~ "\t  (NFS èëè SMB), ñúðâúð çà ïå÷àò (Unix-ñêè èëè Microsoft Windows-ñêè), "
-#~ "ñúðâúð çà àóòîðèçàöèÿ (NIS), ñúðâúð çà\n"
-#~ "\t  áàçè-äàííè è ò.í.. Êàòî òàêúâ, íå î÷àêâàéòå èíñòàëèðàíè êàêâèòî è äà "
-#~ "å øàðèíèè (KDE, GNOME, è ò.í.)."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ñåãà òðÿáâà äà îïðåäåëèòå ïðåäíàçíà÷åíèåòî íà ìàøèíàòà ñè. Âúçìîæíîñòèòå "
-#~ "ñà:\n"
-#~ "\n"
-#~ "* Ðàáîòíà ñòàíöèÿ: òîâà å èäåàëíèÿ èçáîð, àêî âúçíàìåðÿâàòå äà èçïîëçâàòå "
-#~ "ìàøèíàòà ñè ãëàâíî çà åæåäíåâíà óïîòðåáà â\n"
-#~ "  îôèñà èëè ó äîìà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ðàçðàáîòêà: àêî âúçíàìåðÿâàòå äà èçïîëçâàòå ìàøèíàòà ñè ãëàâíî çà "
-#~ "ðàçðàáîòêà íà ñîôóåð, òîâà å äîáúð èçáîð.\n"
-#~ "  Òîãàâà ùå èìàòå èíñòàëèðàí ïúëåí íàáîð îò ñîôòóåð, çà äà êîìïèëèðàòå, "
-#~ "îòêðèâàòå áúãîâå è ôîðìàòèðàòå èçõîäåí êîä,\n"
-#~ "  èëè äà ñúçäàâàòå ñîôóåðíè ïàêåòè.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ñúðâúð: àêî âúçíàìåðÿâàòå äà èçïîëçâàòå òàçè ìàøèíà çà ñúðâúð, òîâà å "
-#~ "äîáðèÿò èçáîð. Âêëþ÷âà ôàéëîâ ñúðâúð\n"
-#~ "  (NFS èëè SMB), ñúðâúð çà ïå÷àò (Unix-ñêè èëè Microsoft Windows-ñêè), "
-#~ "ñúðâúð çà àóòîðèçàöèÿ (NIS), ñúðâúð çà\n"
-#~ "  áàçè-äàííè è ò.í.. Êàòî òàêúâ, íå î÷àêâàéòå èíñòàëèðàíè êàêâèòî è äà å "
-#~ "øàðèíèè (KDE, GNOME, è ò.í.)."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Ñåãà ìîæåòå äà èçáåðåòå ïðèíòåð îò ñïèñúêà ïî-ãîðå."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Òðÿáâà äà ïðèåìåòå óñëîâèÿòà íà ëèöåíçà ïî-ãîðå, çà äà ïðîäúëæè "
-#~ "èíñòàëàöèÿòà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Öúêíåòå \"Ïðèåìè\", àêî ñòå ñúãëàñíè ñ óñëîâèÿòà ìó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Öúêíåòå \"Îòêàæè\", àêî íå ñòå ñúãëàñíè ñ óñëîâèÿòà ìó. Èíñòàëàöèÿòà ùå "
-#~ "ïðèêëþ÷è áåç ïðîìÿíà íà íàñòîÿùàòà\n"
-#~ "íàñòðîéêà."
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Òðÿáâà äà âúâåäåòå íÿêàêâà èíôîðìàöèÿ òóê.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Èìå íà ïðèíòåð: ïî ïîäðàçáèðàíå, ïå÷àòíèÿ spooler èçïîëçâà \"lp\" "
-#~ "êàòî èìå íà ïðèíòåð. Òàêà ÷å òðÿáâà äà èìàòå\n"
-#~ "ïðèíòåð íàðå÷åí \"lp\".\n"
-#~ "     Àêî èìàòå ñàìî åäèí ïðèíòåð, ìîæåòå äà èçïîëçâàòå íÿêîëêî èìåíà çà "
-#~ "íåãî. Ïðîñòî òðÿáâà äà ãè îòäåëèòå ñ pipe\n"
-#~ "     ñèìâîëà (\"|\"). Òàêà ÷å, àêî ïðåäïî÷èòàòå ïî-ñìèñëåíî èìå, ìîæåòå "
-#~ "äà ãî ñëîæèòå ïúðâî, íàïð. \"My printer|lp\".\n"
-#~ "     Ïðèíòåðúò ñúäúðæàù \"lp\" â èìåòî(àòà) ñè, ùå ñå ïîëçâà ïî "
-#~ "ïîäðàçáèðàíå.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spool äèðåêòîðèÿ: òîâà å äèðåêòîðèÿòà, êúäåòî ñå ñúõðàíÿâàò ðàáîòèòå "
-#~ "çà ïå÷àò. Îñòàâåòå ñòîéíîñòòà\n"
-#~ "      ïî ïîäðàçáèðàíå, îñâåí àêî íå çíàåòå êàêâî äà èçïîëçâàòå\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Âðúçêà êúì ïðèíòåð: Àêî ïðèíòåðúò âè å ôèçè÷åñêè ñâúðçàí êúì "
-#~ "êîìïþòúðà âè, èçáåðåòå \"Ëîêàëåí ïðèíòåð\".\n"
-#~ "     Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà îòäàëå÷åíà Unix ìàøèíà, "
-#~ "èçáåðåòå \"Îòäàëå÷åí LPD ïðèíòåð\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà îòäàëå÷åíà Microsoft "
-#~ "Windows ìàøèíà (èëè íà Unix ìàøèíà ïîëçâàùà SMB\n"
-#~ "     ïðîòîêîë), èçáåðåòå \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Àêî èñêàòå äîñòúï äî ïðèíòåð íàìèðàù ñå íà NetWare ìðåæà, èçáåðåòå "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Ïðèíòåðúò âè áåøå çàñå÷åí. Ìîëÿ, âúâåäåòå èìåòî íà óñòðîéñòâîòî, íà "
-#~ "êîåòî\n"
-#~ "å ñâúðçàí.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çà èíôîðìàöèÿ, ïîâå÷åòî ïðèíòåðè ñà ñâúðçàíè íà ïúðâèÿ ïàðàëåëåí ïîðò. "
-#~ "Òîçè\n"
-#~ "ñå íàðè÷à \"/dev/lp0\" ïîä GNU/Linux è \"LPT1\" ïîä Microsoft Windows."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ñèñòåìàòà âè ùå ñå ðåñòàðòèðà.\n"
-#~ "\n"
-#~ "Ñëåä êàòî ðåñòàðòèðà, âàøàòà íîâà Mandrake Linux ñèñòåìà ùå ñå çàðåäè\n"
-#~ "àâòîìàòè÷íî. Àêî èñêàòå äà ïóñíåòå äðóãà ñúùåñòâóâàùà îïåðàöèîííà "
-#~ "ñèñòåìà,\n"
-#~ "ïðî÷åòåòå äîïúëíèòåëíèòå èíñòðóêöèè."
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "âñè÷êè äàííè âúðõó òÿõ ùå áúäàò çàãóáåíè"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "âíèìàíèå: Â ÒÎÂÀ ÍÈÂÎ ÍÀ ÑÈÃÓÐÍÎÑÒ, ROOT ÂËÈÇÀÍÅÒÎ ÍÀ ÊÎÍÇÎËÀÒÀ ÍÅ Å "
-#~ "ÏÎÇÂÎËÅÍÎ !\n"
-#~ "Àêî èñêàòå äà ñòå root, òðÿáâà äà âëåçåòå êàòî ïîòðåáèòåë è òîãàâà äà "
-#~ "èçïîëçâàòå \"su\".\n"
-#~ "Êàòî öÿëî, íå î÷àêâàéòå äà èçïîëçâàòå ìàøèíàòà ñè çà íåùî äðóãî, îñâåí çà "
-#~ "ñúðâúð.Áÿõòå ïðåäóïðåäåí."
-
-#~ msgid "cannot fork: "
-#~ msgstr "íå ìîãà äà ñå îòäåëÿ: "
-
-#~ msgid "default"
-#~ msgstr "ïî ïîäðàçáèðàíå"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "íå èçïîëçâàé PPPOE"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "Õîðèçîíòàëíà äîáðå-èçãëåæäàùà aurora"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (âàæåí)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (äîáúð)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (ìíîãî äîáúð)"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "not connected"
-#~ msgstr "íå ñâúðçàí"
-
-#~ msgid "received: "
-#~ msgstr "ïîëó÷åíè: "
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake å â ðåæèì íà ``ìàëêî ïàìåò''.\n"
-#~ "Ùå ïóñíà îòíîâî rpmdrake, çà äà ðàçðåøà òúðñåíåòî íà ôàéëîâå"
-
-#~ msgid "sent: "
-#~ msgstr "èçïðàòåíè: "
-
-#~ msgid "using module"
-#~ msgstr "èçïîëçâàíå íà ìîäóë"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "Îáèêíîâåíà âåðòèêàëíà aurora"
-
-#~ msgid "yellow pages"
-#~ msgstr "æúëòè ñòðàíèöè"
diff --git a/perl-install/share/po/br.po b/perl-install/share/po/br.po
deleted file mode 100644
index f210d9039..000000000
--- a/perl-install/share/po/br.po
+++ /dev/null
@@ -1,12284 +0,0 @@
-# DrakX e Brezhoneg.
-# Copyright (C) 1999-2002 MandrakeSoft
-# Thierry Vignaud <tvignaud@mandrakesoft.com>, 1999-2002
-# Jañ-Mai Drapier <jan-mai.drapier@mail.dotcom.fr>, 1999-2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 8.2\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: 2002-01-28 22:41GMT\n"
-"Last-Translator: Thierry Vignaud <tvignaud@mandrakesoft.com>\n"
-"Language-Team: Brezhoneg <ofisk@wanadoo.fr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr "Implijit Xinemara"
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Kefluniadur hep ken kartenn \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:250
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr "Kartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr "Diuzit ur gartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr "Dibabit ur servijer X"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr "servijer X"
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "Choose a X driver"
-msgstr "Dibabit ur sturier X"
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "X driver"
-msgstr "Sturier X"
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:364
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pe seurt enmont a vennit ouzhpennañ"
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s gant 3D"
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr "Staliadur XFree86"
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr "Diuzit ment memor ho kartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr "Dibabit dibarzhoù ar servijer"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr "Dibabit ur skramm"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr "Skramm"
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"An div arventenn dreistpouezus a zo ar feur freskaat a-serzh, da lavaret eo "
-"ar\n"
-"feur ma vez freskaet ar skramm a-bezh, ha pouezusuc'h c'hoazh ar feur "
-"kempredañ\n"
-"a-led, da lavaret eo ar feur ma vez diskwelet linennoù skubañ.\n"
-"\n"
-"HOLLBOUEZHUS eo deoc'h na spisaat ur seurt skramm gant ur feur kempredañ\n"
-"a zo en tu-hont da varregezh ho skramm : gallout a rafe gwastañ ho skramm\n"
-" M'hoc'h eus douetañs, dibabit ur c'hefluniadur fur."
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr "Feur freskaat a-led"
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr "Feur freskaat a-serzh"
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr "Skramm ket kefluniet"
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr "Kartenn c'hrafek ket kefluniet c'hoazh"
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr "Spisterioù ket dibabet c'hoazh"
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../Xconfigurator.pm_.c:651
-#, fuzzy
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr "Da ziwall : arvarus eo amprouiñ ar gartenn c'hrafek-mañ"
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr "Amprouiñ ar c'hefluniadur"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"klaskit kemmañ arventennoù 'zo"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr "C'hoarvezet eo ur fazi :"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Kuitaat e %d eilenn"
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr "Ha reizh eo ar c'hefluniadur ?"
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr "C'hoarvezet eo ur fazi, klaskit kemmañ arventennoù 'zo"
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr "Spister"
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr "Dibabit ar spister ha donder al livioù"
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Kartenn c'hrafek : %s"
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servijer XFree86 : %s"
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Dilec'hiañ"
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr "Mat eo"
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mod mailh"
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr "Diskouez pep tra"
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr "Spisterioù"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Reizhadur ar stokellaoueg : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Seurt logodenn : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Trobarzhell al logodenn : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "KempredA-led ar skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "FreskA-serzh ar skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Kartenn c'hrafek : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr "Anavezoud kartenn c'hrafek : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memor c'hrafek : %s ko\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Donder liv: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Spister: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servijer XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Sturier XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr "O prientiñ kefluniadur X-Window"
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr "Petra a vennit ober ? "
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr "Kemmañ ar skramm"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr "Kemmañ ar gartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr "Kemmañ dibarzhoù ar servijer"
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr "Kemmañ ar spister"
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr "Diskouez titouroù"
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr "Amprouiñ adarre"
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Kuitaat"
-
-#: ../../Xconfigurator.pm_.c:1585
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr "Derc'hel ar c'hefluniadur IP o ren"
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr "X pa loc'her"
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Kefluniañ ho urzhiataer evit lañsañ X ent emgefreek pa loc'ho a c'hellañ.\n"
-"Mennout a rit lañsañ X pa adloc'hit ?"
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Adereit ouzh %s evit bevaat ar c'hemmoù mar plij"
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Dizereit mar plij ha neuze implijit Ctrl-Alt-WarGil"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 liv (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil liv (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil liv (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milion a livioù (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliard a livioù (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mo pe vuioc'h"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standard, 640x480 da 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Gour-VGA, 800x600 da 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Kenglotus 8514, 1024x768 da 87 Hz pebeilet (800x600 ebet)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Gour-VGA, 1024x768 da 87 Hz pebeilet, 800x600 da 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Gour-VGA astennet, 800x600 da 60 Hz, 640x480 da 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "G-VGA nann-pebeilet, 1024x768 da 60 Hz, 800x600 da 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "G-VGA talm uhel, 1024x768 da 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skramm a c'hell ober 1600x1200 da 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skramm a c'hell ober 1600x1200 da 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Rann gentañ ar parzhadur loc'hañ"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Rann gentañ ar bladenn (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Staliadur SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Pelec'h e mennit staliañ ar c'harger loc'hañ ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Staliadur LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO gant meuziad skrid"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO gant meuziad c'hrafek"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Loc'hañ abaoe DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Dibarzhoù pennañ ar c'harger loc'hañ"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "C'harger loc'hañ da implijout"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Staliadur c'harger loc'hañ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Trobarzhell loc'hañ"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne da ket en-dro gant BIOSoù kozh)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Fetis"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "fetis"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mod video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Gedvezh kent loc'hañ ar skeudenn dre ziouer"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Tremenger"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr "Tremenger (adarre)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Strishaat dibarzhoù al linenn urzhiañ"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "strishaat"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Skarañ /tmp bep ma loc'her"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Spisait ment ar memor vev diouzh ret (kavet %d Mo)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Aotren lies trolinenn"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Roit ment ar memor vev e Mo"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Didalvout eo ``Strishaat dibarzhoù al linenn urzhiañ'' hep tremenger"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr "Klaskit adarre mar plij"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr "An tremegerioù ne glot ket"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "RK dre ziouer"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Setu da heul an enmontoù liesseurt.\n"
-"Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr "Ouzhpennañ"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Graet"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Kemmañ"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Pe seurt enmont a vennit ouzhpennañ"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Reizhiadoù (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Reizhiadoù (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Reizhiadoù (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Skeudenn"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Gwrizienn"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Ouzhpennañ"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lenn-skrivañ "
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taolenn"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Arvarus"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Skridennad"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Dre ziouer"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Ment an Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "N'ev ket video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Dilemel an enmont"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Berzet eo ar skridennadoù goullo"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Ret eo deoc'h kaout ur parzhadur disloañ"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "En implij eo ar skridennad-se endeo"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Kavet etrefas %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Hag un all hoc'h eus ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hag un etrefas %s bennak a zo ganeoc'h ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr "Ket"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr "Ya"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Gwelet titouroù periantel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "O staliañ ur sturier evit kartenn %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(mollad %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pe sturier %s a zlefen amprouiñ ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"E degouezhoù 'zo, ar sturier %s en deus ezhomm titouroù ouzhpenn evit mont\n"
-"en-dro reizh, daoust ma da en-dro mat hepto peurvuiañ. Ha mennout a rit "
-"spisaat\n"
-"dibaboù ouzphenn evitañ, pe aotren d'ar sturier amprouiñ ho penvek evit\n"
-"an titouroù en deus ezhomm ? A-wechoù, amprouiñ a c'hell sac'hañ un "
-"urzhiataer,\n"
-"hogen ne raio reuz ebet."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Embrouiñ"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spisait dibarzhoù"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Bremañ e c'hellit pourvezañ e zibarzhoù d'ar mollad %s.\n"
-"Diouzh ar furmad ``anv=talvoud anv2=talvoud2...'' eo an dibaboù.\n"
-"Da skouer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Dibarzhoù ar mollad :"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Kargañ ar mollad %s a zo sac'het.\n"
-"Mennout a rit klask adarre gant arventennoù all ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ouzhpennet %s endeo)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Re eeun eo an tremeger"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Roit un anv arveriad mar plij"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"An anv arveriad a zle bezañ ennañ lizherennoù munut, sifroù, `-' ha `_' "
-"hepken"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "En implij eo an anv arveriad-se endeo"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ouzhpennañ un arveriad"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Skrivit un arveriad\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aotren an arveriad"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Anv gwirion"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr "Anv arveriad"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Arlun"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Kefluniañ ho urzhiataer evit lañsañ X ent emgefreek pa loc'ho a c'hellañ.\n"
-"Mennout a rit lañsañ X pa adloc'hit ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Dibabit ar arveriad dre ziouer"
-
-#: ../../any.pm_.c:834
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Dibabit ar benveg a vennit staliañ"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Gallout a rit dibab yezhoù all hag a vo hegerz goude staliañ"
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr "An holl"
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr "Aotreiñ an holl dud"
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr "Personelañ"
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr "N'ev ket lodañ"
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Bremanaet e tle bezañ ar pabak-mañ\n"
-"Ha sur oc'h e mennit e ziuzañ ?"
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Nullañ"
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr "Bezit deuet mat, preizherien !"
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr "Paour"
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Skouer"
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr "Uhel"
-
-#: ../../any.pm_.c:1041
-#, fuzzy
-msgid "Higher"
-msgstr "Uhel"
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr "Ankeniet"
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ret eo implijout al live-mañ gant evezh. Ober a ra d'ho reizhiad bezañ\n"
-"aesoc'h da implijout, hogen kizidig-tre : arabat e implj evit un ardivink\n"
-"kevreet ouzh lod all pe ouzh ar genrouedad. N'eus ket a haeziñ dre dremenger."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Gweredekaet eo bremañ an tremenger, hogen dierbedet eo c'hoazh an implij en "
-"ur rouedad"
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Setu al live surentez standard a vez erbedet evit un urzhiataer a vo "
-"implijet\n"
-"evit kevreañ evel arval ouzh ar Genrouedad. Bremañ ez eus gwiriadennoù "
-"surentez."
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1051
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Gant al live surentez-mañ e teu posupl implijout ar reizhiad-mañ evel ur "
-"servijer.\n"
-"Uhel a-walc'h eo bremañ ar surentez evit implijout ar reizhiad evel ur "
-"servijer\n"
-"o tigemer kevreadennoù a-berzh arvaloù niverus."
-
-#: ../../any.pm_.c:1054
-#, fuzzy
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Kemer a reomp arc'hweloù al live 4, hogen bremañ eo peurserret ar reizhiad.\n"
-"Arc'hweloù surentez a zo en o muiañ"
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr "Dibabit al live surentez"
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr "Live surentez"
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr "Implijit libsafe gant ar servijer"
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Degemer mat e %s, an dibaber reizhiad oberian~ !\n"
-"\n"
-"Dibabit an dibaber reizhiad pe\n"
-"gortozit %d eilennoù\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Degemer mat e GRUB an dibaber reizhiad oberia¤ !"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Implijit ar stokelloù %c ha %c evit diuz pe enmont zo war wel"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stokit enkas evit loc'ha¤ ar RK diuzet, 'e' evit aoza¤ an"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "urzhiado— kent loc'ha¤, pe 'c' evit ul linenn-urzhia¤."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "An enmont war wel a vo loc'het ent emgefreek e %d eilenn."
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr "Gorretaol"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr "Meuziad Lañsañ"
-
-#: ../../bootloader.pm_.c:1047
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Pelec'h e mennit staliañ ar c'harger loc'hañ ?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "N'ev ket skoazell.\n"
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Restr"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Restr/_Kuitaat"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Skramm"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Kemmañ ar skramm"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Anv domani"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Trobarzhell loc'hañ"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Kefluniañ"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr "YA"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Go"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Ko"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mo"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "To"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d munutennoù"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 munutenn"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d eilenn"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "N'hellan ouzpennañ parzhadur ebet ken"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Gallout a rit dibab yezhoù all hag a vo hegerz goude staliañ"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr "Gall"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr "Beljik"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tchek"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alaman"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gres"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvegek"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suis"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr "Italian"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "a-steud"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr "Amerika"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Gwarezit ho roadoù da gentañ mar plij"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr "Lennit aketus !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"M'emaoc'h e soñj implijout aboot, taolit evezh leuskel un egor dieub (2048 "
-"rann\n"
-"a zo a-walc'h) e deroù ar bladenn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fazi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Skoazeller"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Dibabit un obererezh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Ur mell barzhadur FAT hoc'h eus\n"
-"(implijet gant MicroSoft Dos/Windows peurliesañ).\n"
-"Aliañ a ran ouzoc'h adventañ ar parzhadur-se\n"
-"(klikit warni, da c'houde klikit war \"Adventañ\")"
-
-#
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klikit war ur parzhadur mar plij"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Munudoù"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "marc'hañ sac'het"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Disloañ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr "Goullo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr "All"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Seurt ar reizhiadoù restroù :"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Krouiñ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Seurt"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Grit kentoc'h gant ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Dilemel"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Implijit ``Divarc'hañ'' da gentañ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Goude kemmañ seurt ar parzhadur %s, holl roadoù ar parzhadur-se a vo kollet"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Dibabit un parzhadur"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Dibabit un parzhadur all"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Kuitaat"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Tremen er mod mailh"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Tremen er mod boas"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Dizober"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Kuitaat hep enrollañ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Kuitaat hep skrivañ an daolenn barzhañ ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Ac'hubiñ ent emgefreek"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Skarañ an holl"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Dinoiñ ar bladenn galet"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Ac'hubet eo an holl barzhadurioù kentañ renk"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "N'hellan ouzpennañ parzhadur ebet ken"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Evit kaout muioc'h a barzhadurioù, lamit unan evit ma c'hellot krouiñ ur "
-"parzhadur astennet mar plij"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skrivañ an daolenn barzhañ"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Taolenn barzhañ saveteerezh"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Taolenn barzhañ saveteerezh"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Taolenn barzhañ saveteerezh"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Emvarc'hañ ar skoroù lem/laka"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Diuzit ar restr"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"N'eo ket heñvel ment an daolenn barzhañ gwarezet\n"
-"Kenderc'hel memestra ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Ho evezh"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Lakait ur bladennig el lenner\n"
-"Kollet e vo holl roadoù ar bladennig-se"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "O klask assevel an daolenn barzhañ"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Diskouez titouroù"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Poent marc'hañ"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-#, fuzzy
-msgid "Options"
-msgstr "Parzhadur"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr "Adventañ"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr "Dilec'hiañ"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Furmadiñ"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Marc'hañ"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ouzhpennañ da RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ouzhpennañ da LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Divarc'hañ"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Lemel diwar RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Lemel diwar LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Kemmañ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Implij da saveteiñ"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Krouiñ ur parzhadur nevez"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Rann kregiñ : "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr "Ment e Mo : "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr "Seurt ar reizhiad restroù : "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr "Poent marc'hañ : "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Dibarzh : "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "O furmadiñ ar restr saveteiñ %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Kemmañ seurt ar parzhadur"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Pelec'h e mennit marc'hañ ar restr saveteiñ %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Pelec'h e mennit marc'hañ an drobarzhell %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"N'hellan ket dizober ar poent marc'hañ dre m'eo implijet ar parzhadur-se\n"
-"evit saveteiñ. Lamit ar saveteiñ da gentañ"
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr "O jediñ bevennoù ar reizhiad restroù FAT"
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Oc'h adventañ"
-
-#: ../../diskdrake/interactive.pm_.c:617
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr "Mat e vije gwareziñ holl roadoù ar parzhadur-se"
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Goude adventañ ar parzhadur %s e vo kollet holl roadoù ar parzhadur-se"
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr "Ment nevez e Mo : "
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr "Rann"
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr "Da beseurt rann e mennit dilec'hiañ ?"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr "O tilec'hiañ"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr "O tilec'hiañ ur parzhadur..."
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr "Dibabit da be RAID ouzhpennañ"
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr "nevez"
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr "Dibabit da be LVM ouzhpennañ"
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr "Anv LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr "N'heller ket implijout ar parzhadur-mañ evit saveteiñ"
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr "Saveteiñ"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr "Anv ar restr saveteiñ : "
-
-#: ../../diskdrake/interactive.pm_.c:785
-#, fuzzy
-msgid "Give a file name"
-msgstr "Anv gwirion"
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr "Restr implijet gant ur saveteiñ all endeo, dibabit unan all"
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr "Ar restr a zo endeo. E implijout ?"
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr "Dibarzhoù marc'hañ"
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr "A bep sort"
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr "trobarzhell"
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr "live"
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr "ment diaoz"
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr "Bezit war evezh : arvarus eo an obererezh-mañ."
-
-#: ../../diskdrake/interactive.pm_.c:914
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ma zigarezit na asantiñ krouiñ /boot ken pell war ar bladenn (war ur granenn "
-"> 1024).\n"
-"Pe e implijit LILO ha ne daio ket en-dro, pe ne rit ket ha n'hoc'h eus ket "
-"ezhomm a /boot"
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Lec'hiet eo ar parzhadur hoc'h eus diuzet da ouzphennañ evel gwrizienn (/) "
-"en tu-hont\n"
-"d'ar 1024vet kranenn eus ar bladenn galet, ha n'hoc'h eus ket a barzhadur /"
-"boot.\n"
-"Ma vennit implijout ar merour loc'hañ LILO, taolit pled da ouzhpennañ ur "
-"parzhadur /boot"
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "War-nes bezañ skrivet war bladenn eo taolenn barzhañ an ardivink %s !"
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Ret e vo deoc'h adloc'hañ a-raok ma talvezo ar c'hemm"
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Goude furmadiñ ar parzhadur %s, holl roadoù ar parzhadur-se a vo kollet"
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr "O furmadiñ"
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "O furmadiñ ar restr saveteiñ %s"
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "O furmadiñ ar parzhadur %s"
-
-#: ../../diskdrake/interactive.pm_.c:992
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid sac'het"
-
-#: ../../diskdrake/interactive.pm_.c:992
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Krouiñ ur parzhadur nevez"
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Krouiñ ur parzhadur nevez"
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr "Adskrivañ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Spisterioù"
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr "Trobarzhell : "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lizher ar bladenn DOS : %s (diwar varteze hepken)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr "Seurt : "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr "Anv: "
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "O kregiñ : rann %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr "Ment: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s rann"
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Kranenn %d da granenn %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr "Furmadet\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr "Ket furmadet\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr "Marc'het\n"
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Restr(où) saveteiñ : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Parzhadur loc'het dre ziouer\n"
-"    (evit loc'hañ MS-DOS, ket evit lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr "Live %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ment diaoz %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Pladennoù RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Anv ar restr saveteiñ : %s"
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ment: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Mentoniezh : %s kranenn, %s penn, %s rann\n"
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr "Titouroù: "
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Pladennoù LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Seurt taolenn barzhañ : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "war bus %d Nn %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "Parzhadur"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Seurt ar reizhiad restroù : "
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Re eeun eo an tremenger-se (%d arouezenn a zo ret d'an nebeutañ)"
-
-#: ../../diskdrake/interactive.pm_.c:1143
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "An tremegerioù ne glot ket"
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Kemmañ seurt ar parzhadur"
-
-#
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a medium"
-msgstr "Klikit war ur parzhadur mar plij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Servijer DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "furmadiñ er seurt %s eus %s a zo sac'het"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "N'ouzon ket penaos furmadiñ %s er seurt %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fazi en ur zivarc'hañ %s : %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eeun"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "gant /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servijer"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Poentoù marc'hañ a rank kregiñ gant /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Bez' ez eus ur parzhadur e boent marc'hañ %s endeo\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fazi en ur zigeriñ %s evit skrivañ : %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"C'hoarvezet ez eus ur fazi - n'eus bet kavet trobarzhell reizh ebet a-benn "
-"krouiñ reizhiadoù restroù nevez warni. Gwiriit abeg ar gudenn-mañ en ho "
-"ardivinkaj mar plij "
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "N'hoc'h eus parzhadur ebet !"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Bremañ e c'hellit diuz pe servijoù a vennit e vije lañset pa loc'her.\n"
-"Pa zeu ho logodenn war un draez, ul lagadenn skoazell a zeuio war wel hag\n"
-"a zisplego pal ar servij-se.\n"
-"\n"
-"Bezit aketuz-kenañ el lankad-mañ ma vennit implijout ho ardivink evel ur\n"
-"servijer : mennout a rit emichañs chom hep loc'hañ kement servij n'ho peus "
-"ket\n"
-"c'hoant."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr "Gortozit mar plij"
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-#, fuzzy
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Gortozit mar plij."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Diuzit ar porzh a zere mar plij. Da skouer, porzh COM1 dindan MS Windows\n"
-"a vez anvet ttyS0 gant Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) ha Grub a zo kargerien loc'hañ : barrek int da "
-"loc'hañ\n"
-"pe Linux pe forzh pe reizhiad korvoiñ all bezañt war ho urzhiataer.\n"
-"Peurvuiañ, ar reizhiadoù korvoiñ all-se a vez dinoet ha staliet reizh.\n"
-"Ma n'eo ket kont evel-hen, gallout a rit ouzhpennañ un enmont gant an dorn\n"
-"er skramm-mañ. Taolit pled da zibab an arventennoù reizh.\n"
-"\n"
-"\n"
-"Gallout a rafec'h ivez mennout na lakaat hegerz hini ebet eus ar reizhiadoù\n"
-"korvoiñ-se, neuze n'hoc'h eus ken nemet dilemel an enmontoù a zegouezh. "
-"Hogen\n"
-"neuze e vo ret deoc'h kaout ur bladennig loc'hañ evit loc'hañ anezho."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Ret eo deoc'h menegiñ pelec'h e mennit\n"
-"lec'hiañ an titouroù ret evit loc'hañ Linux.\n"
-"\n"
-"\n"
-"Nemet ma ouifec'h resis ar pezh a rit, dibabit \"Rann gentañ\n"
-"ar bladenn (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "N'hellañ ket implijout ar skignañ hep domani NIS"
-
-#: ../../install_any.pm_.c:794
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fazi en ur lenn ar restr %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ret eo deoc'h kaout ur parzhadur gwrizienn.\n"
-"Evit se, krouit ur parzhadur (pe glikit war unan a zo c'hoazh).\n"
-"Da c'houde dibabit an ober ``Poent marc'hañ'' ha lakait anezhañ da `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Ret eo deoc'h kaout ur parzhadur disloañ"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N'hoc'h eus ket a barzhadur disloañ\n"
-"\n"
-"Kenderc'hel evelato ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Ret eo deoc'h kaout ur parzhadur disloañ"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Use free space"
-msgstr "Implij da saveteiñ"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-#, fuzzy
-msgid "Use existing partitions"
-msgstr "O furmadiñ parzhadurioù"
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "O klask assevel an daolenn barzhañ"
-
-#: ../../install_interactive.pm_.c:109
-#, fuzzy
-msgid "Use the Windows partition for loopback"
-msgstr "Implij da saveteiñ"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pe barzhadur a vennit implijout evit lakaat Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Dibabit ar mentoù"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ment ar parzhadur gwrizienn e Mo : "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ment ar parzhadur disloañ e Mo : "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Resizing Windows partition"
-msgstr "O jediñ bevennoù ar reizhiad restroù FAT"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HO EVEZH !\n"
-"\n"
-"Ezhomm en deus DrakX adventañ ho parzhadur Windows bremañ. Bezit war "
-"evezh :\n"
-"arvarus eo an obererezh-se. Ma n'hoc'h eus ket graet c'hoazh, gwelloc'h e\n"
-"vije deoc'h seveniñ da gentañ scandisk (ha diouzh ret seveniñ defrag) war "
-"ar\n"
-"parzhadur-se, ha gwareziñ ho roadoù. Pa vezit sur, gwaskit \"Mat eo\""
-
-#: ../../install_interactive.pm_.c:147
-#, fuzzy
-msgid "Which size do you want to keep for Windows on"
-msgstr "Da beseurt rann e mennit dilec'hiañ ?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "parzhadur %s"
-
-#: ../../install_interactive.pm_.c:155
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Adventañ ent emgefreek sac'het"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Chetan an holl planedenn"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Chetan Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Goude adventañ ar parzhadur %s e vo kollet holl roadoù ar parzhadur-se"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "O furmadiñ parzhadurioù"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Implijit fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, fuzzy, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Gallout a rit bremañ parzhañ ho pladenn galet %s\n"
-"Pa 'z eo graet, na zisoñjit ket enrollañ dre implijout `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "N'hoc'h eus parzhadur windows ebet !"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "N'hellan ouzpennañ parzhadur ebet ken"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Seurt taolenn barzhañ : %s\n"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "O lañsañ ar rouedad"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "O tizenaouiñ ar rouedad"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Degouezhet ez eus ur fazi, hogen n'ouzon ket e verañ naet.\n"
-"Kendalc'hit war ho mar."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Poent marc'hañ doubl %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Degemer e %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Lenner pladennig hegerz ebet"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "O kregiñ gant al lankad `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Renkad staliañ"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Dibabit unan eus ar renkadoù staliañ a-heul mar plij :"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ment hollek ar strolladoù hoc'h eus diuzet a zo war-dro %d Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ma vennit staliañ nebeutoc'h eget ar ment-se,\n"
-"diuzit an dregantad a bakadoù a vennit staliañ.\n"
-"\n"
-"Un dregantad izel a stalio hepken ar pakadoù pouezusañ;\n"
-"un dregantad a 100%% a stalio an holl bakadoù diuzet."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"N'eus egor war ho pladenn nemet evit %d%% eus ar pakadoù-se.\n"
-"\n"
-"Ma vennit staliañ nebeutoc'h eget se,\n"
-"diuzit an dregantad a bakadoù a vennit staliañ.\n"
-"Un dregantad izel a stalio hepken ar pakadoù pouezusañ;\n"
-"un dregantad a %d%% a stalio kement a bakadoù ma 'z eus tu."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Tu vo deoc'h o dibab spisoc'h el lankad a zeu."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Dregantad a bakadoù da staliañ"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr "Diuzadenn strollad pakadoù"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr "Diuz pakadoù unan hag unan"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ment hollek : %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakad siek"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Anv : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Stumm : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ment : %d Ko\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Talvoudegezh : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-#, fuzzy
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "N'hellit ket andiuz ar pakad-mañ. Staliet eo endo"
-
-#: ../../install_steps_gtk.pm_.c:422
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Ar pakadoù a-heul a zo war-nes bezañ distaliet"
-
-#: ../../install_steps_gtk.pm_.c:423
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Ar pakadoù a-heul a zo war-nes bezañ staliet/lamet"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "N'hellit ket diuz/andiuz ar pakad-mañ"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hemañ a zo ur pakad ret, n'hell ket bezañ andiuzet"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "N'hellit ket andiuz ar pakad-mañ. Staliet eo endo"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bremanaet e tle bezañ ar pabak-mañ\n"
-"Ha sur oc'h e mennit e ziuzañ ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "N'hellit ket andiuz ar pakad-mañ. Ret eo dezhañ bezañ bremanaet"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Staliañ"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Enrollañ war bladennig"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Diuz pakadoù unan hag unan"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Distaliañ"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr "Dibabit ar pakadoù a vennit staliañ"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr "O staliañ"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "O vrasjediñ"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Amzer a chom"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr "Gortozit mar plij, o prientiñ ar staliadur"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakad"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "O staliañ ar pakad %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aotren"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#, fuzzy
-msgid "Refuse"
-msgstr "Adventañ"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Kemmit ho Cd-Rom!\n"
-"\n"
-"Lakait el lenner ar Cd-Rom warnañ an diketenn \"%s\" mar plij ha gwaskit Mat "
-"eo da c'houde.\n"
-"Ma n'emañ ket ganeoc'h gwaskit Nullañ evit chom hep staliañ ar Cd-Rom-se."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr "Ur fazi a zo bet en ur rummañ pakadoù :"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr "Ur fazi a zo bet en ur staliañ ar pakadoù :"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ur fazi a zo bet"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Stokellaoueg"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Dibabit reizhadur ho stokellaoueg, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:207
-#, fuzzy
-msgid "Here is the full list of keyboards available"
-msgstr "stokellaoueg"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Pe renkad staliañ a fell deoc'h ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Staliañ/Bremanaat"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Hag ur staliadur pe ur bremanadur eo ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Erbedet"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Mailh"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Bremanaat"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Bremanaat pakadoù hep ken"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porzh al logodenn"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outañ, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "O kefluniañ kartennoù PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Kefluniañ IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr "parzhadur hegerz ebet"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Dibabit at poentoù marc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"N'hellañ ket lenn ho taolenn barzhañ, re vrein eo evidon :(\n"
-"Klask a rin kenderc'hel en ur ziverkañ ar parzhadurioù siek"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Ne c'hellas ket DiskDrake lenn ent reizh an daolenn barzhañ.\n"
-"Kendalc'hit war ho mar !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Parzhadur gwrizienn kavet ebet"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Parzhadur gwrizienn"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Pehini eo parzhadur gwrizienn (/) ho reizhiad ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Ret eo deoc'h adloc'hañ evit ma talvezo kemmoù an daolenn barzhañ"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Dibabit ar parzhadur a vennit furmadiñ"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Gwiriañ ar bloc'hoù siek ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "O furmadiñ parzhadurioù"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "O krouiñ hag o furmadiñ ar restr saveteiñ %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Ket a-walc'h a zisloañ evit peurstaliañ, kreskit anezhañ mar plij"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr "O klask ar pakadoù hegerz"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr "O kavout pakadoù da vremanaat"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, fuzzy, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "Ho reizhiad n'eus ket wa-walc'h a egor evit staliañ pe vremanaat"
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr "Assevel adalek ar pladennig"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr "Assevelañ adalek ar pladennig"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr "Diuzadenn pakadoù"
-
-#: ../../install_steps_interactive.pm_.c:548
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr "Enrollañ war bladennig"
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:641
-#, fuzzy
-msgid "Type of install"
-msgstr "Dibabit pakadoù da staliañ"
-
-#: ../../install_steps_interactive.pm_.c:642
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr "Gant X"
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"M'hoc'h eus an holl CDoù er roll a-is, gwaskit Mat eo.\n"
-"Ma n'hoc'h eus hini eus ar CDoù-se, gwaskit Nullañ.\n"
-"Ma fazi deoc'h lod eus ar CDoù, andiuzit anezho ha gwaskit Mat eo."
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom skridennet \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr "O prientiñ ar staliadur"
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"O staliañ ar pakad %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../install_steps_interactive.pm_.c:818
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:824
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Lakait ur bladennig gwerc'h el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tu zo deoc'h bremañ ezkargañ meziantoù gouestlet d'ar rinegouriezh.\n"
-"\n"
-"HO EVEZH :\n"
-"\n"
-"Abalamour m'eo disheñvel ar pennaennoù meur o talvezout evit ar meziantoù-"
-"mañ hervez\n"
-"gwiraouriezhoù disheñvel, ret eo d'an arval ha/pe arveriad en diwezh ar "
-"meziantoù-mañ\n"
-"gwiriañ eo aotreet da ezskargañ, mirout ha/pe implijout ar meziantoù-mañ\n"
-"gouez d'al lezennoù en e/he gwiraouriezh.\n"
-"\n"
-"Ouzhpenn an arval ha/pe arveriad en diwezh a rank bezañ war evezh chom hep "
-"terriñ\n"
-"lezennoù e/he gwiraouriezh. Ma c'hoarvezfe gant an arval ha/pe arveriad\n"
-"en diwezh na zoujañ ouzh termenoù lezennoù o talvezout, e telezfe kastizoù\n"
-"kriz.\n"
-"\n"
-"E nep degouezh ne vo dalc'het Mandrakesoft nag e oberatourien na/pe e "
-"bourvezerien\n"
-"atebek eus nep gaou dibar, ameeun pe zarvoudus a c'hoarvezfe (ha pa vefe\n"
-"zoken e-touez traoù all koll gounid, arsav aferioù, koll roadoù kenwerzhel "
-"ha\n"
-"kolloù arc'hant all, hag atebegezh pe zigoll diouzh an dro da vezañ paeet\n"
-"da heul ur barnadeg) o tont diouzh implij, perc'hennañ, pe zoken ezkargañ\n"
-"ar meziantoù-mañ, a c'hellfe an arval ha/pe arveriad en diwezh bezañ\n"
-"grataet goude bezañ sinet an emglev-mañ.\n"
-"\n"
-"\n"
-"Evit forzh pe c'houlenn a-zivout an emglevioù-se, darempredit mar plij\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"SUA"
-
-#: ../../install_steps_interactive.pm_.c:883
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:898
-#, fuzzy
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "O taremprediñ ar melezour evit kaout roll ar pakadoù hegerz"
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dibabit ur melezour da dapout ar pakadoù diwarnañ"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "O taremprediñ ar melezour evit kaout roll ar pakadoù hegerz"
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr "Pe seurt a vo ho takad-eur ?"
-
-#: ../../install_steps_interactive.pm_.c:944
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Ha war GMT eo lakaet ho eurier periantel ?"
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr "Servijer NTP"
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Steud a-bell"
-
-#: ../../install_steps_interactive.pm_.c:987
-#, fuzzy
-msgid "No printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../install_steps_interactive.pm_.c:1004
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Hag un all hoc'h eus ?"
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Evit diverriñ"
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr "Logodenn"
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr "Takad-eur"
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr "Moullerez"
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr "Kartenn ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr "Kartenn son"
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr "Kartenn pellwel"
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr "Restroù lec'hel"
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Termeniñ tremenger root"
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr "Tremenger ebet"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Re eeun eo an tremenger-se (%d arouezenn a zo ret d'an nebeutañ)"
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Dilesadur"
-
-#: ../../install_steps_interactive.pm_.c:1098
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Dilesadur"
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr "Servijer LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr "Dilesadur NIS"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr "Domani NIS"
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr "Servijer NIS"
-
-#: ../../install_steps_interactive.pm_.c:1143
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ur bladenn loc'hañ neuziet a ro un tu da loc'hañ ho reizhiad Linux hep "
-"bezañ\n"
-"dindan beli ar c'harger loc'hañ boas. Talvoudus eo ma ne mennit ket staliañ "
-"LILO\n"
-"(pe grub) war ho reizhiad, pe ma skarzh ur reizhiad oberiañ LILO, pe ma ne\n"
-"da ket en-dro LILO war ho kefluniadur periantel. Ur bladenn loc'hañ neuziet\n"
-"a c'hell ivez bezañ implijet gant ar skeudenn saveteiñ Mandrake, en ur "
-"aesaat an\n"
-"assevel pa vefec'h sac'het grevus. Mennout a rit krouiñ ur bladenn loc'hañ "
-"evit\n"
-"ho reizhiad ?"
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr "Lenner pladennig kentañ"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr "Eil lenner pladennig"
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr "Tremen e-biou"
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ur bladenn loc'hañ neuziet a ro un tu da loc'hañ ho reizhiad Linux hep "
-"bezañ\n"
-"dindan beli ar c'harger loc'hañ boas. Talvoudus eo ma ne mennit ket staliañ "
-"LILO\n"
-"(pe grub) war ho reizhiad, pe ma skarzh ur reizhiad oberiañ LILO, pe ma ne\n"
-"da ket en-dro LILO war ho kefluniadur periantel. Ur bladenn loc'hañ neuziet\n"
-"a c'hell ivez bezañ implijet gant ar skeudenn saveteiñ Mandrake, en ur "
-"aesaat an\n"
-"assevel pa vefec'h sac'het grevus. Mennout a rit krouiñ ur bladenn loc'hañ "
-"evit\n"
-"ho reizhiad ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr "Ho tigarez, lenner pladennig hegerz ebet"
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Dibabit al lenner pladennig a vennit implijout evit ober ar bladenn loc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr "O krouiñ ar bladenn loc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr "O prientiñ ar c'harger loc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr "Mennout a rit implijout aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fazi en ur staliañ aboot,\n"
-"klask rediañ ar staliadur zoken ma tistruj ar parzhadur kentañ ?"
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr "Staliañ ar c'harger loc'hañ"
-
-#: ../../install_steps_interactive.pm_.c:1231
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Staliadur LILO a zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Lakait ur bladennig gwerc'h el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr "O krouiñ ur bladennig staliañ emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Lankadoù 'zo n'int ket peurc'hraet.\n"
-"\n"
-"Mennout a rit kuitaat da vat bremañ ?"
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gourc'hemennoù, peurc'hraet eo ar staliadur.\n"
-"Lamit ar bladenn loc'hañ ha gwaskit enkas evit adloc'hañ.\n"
-"\n"
-"\n"
-"Evit titouroù war palastroù hegerz evit stumm-mañ Mandrake Linux,\n"
-"sellit ouzh ar meneger fazioù hegerz e \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Titouroù war gefluniañ ho reizhiad a zo hegerz e rannbennad Goude\n"
-"Staliañ Sturier ofisiel an Arveriad Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1326
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "O krouiñ ur bladennig staliañ emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr "Emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1333
-#, fuzzy
-msgid "Replay"
-msgstr "Adkargañ"
-
-#: ../../install_steps_interactive.pm_.c:1336
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Diuz pakadoù unan hag unan"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Staliadur Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> etre elfennoù | <Esaouenn> a ziuz | <F12> skramm a heul "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mank"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Dibabit ur restr"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Barek"
-
-#: ../../interactive.pm_.c:315
-#, fuzzy
-msgid "Basic"
-msgstr "Diazez"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Gortozit mar plij"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dibab fall, klaskit adarre\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ho tibab ? (%s dre ziouer)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ho tibab ? (%s dre ziouer)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Nozel `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button?"
-msgstr "Mennout a rit implijout SILO ?"
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ho tibab ? (%s dre ziouer)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr "Tchek (QWERTZ)"
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr "Alaman"
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr "Spagnol"
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr "Finnek"
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr "Gall"
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr "Norvegek"
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr "Polonek"
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr "Rusiek"
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr "Svedek"
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr "Stokellaoueg RU"
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr "Stokellaoueg SUA"
-
-#: ../../keyboard.pm_.c:211
-#, fuzzy
-msgid "Albanian"
-msgstr "Ukrainiek"
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr "Armeniek (kozh)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr "Armeniek (skriverez)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr "Armeniek (soniadel)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjanek (latin)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr "Belgian"
-
-#: ../../keyboard.pm_.c:222
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armeniek (soniadel)"
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarek (BDS)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilek (ABNT-2)"
-
-#: ../../keyboard.pm_.c:225
-#, fuzzy
-msgid "Belarusian"
-msgstr "Bulgarek"
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr "Suis (reizhadur alaman)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr "Suis (reizhadur gall)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr "Tchek (QWERTY)"
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr "Alaman (stokell marv ebet)"
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr "Danek"
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norvegek)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svedek)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr "Estoniek"
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Jorjiek (reizhadur \"Rusiek\")"
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Jorjiek (reizhadur \"Latin\")"
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr "Gresian"
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr "Hungarian"
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr "Kroatek"
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr "Israelian"
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr "Israelian (soniadel)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Iranian"
-msgstr "Ukrainiek"
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr "Islandek"
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr "Italian"
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Reizhadur Stokellaoueg RU"
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr "Amerikan Latin"
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituaniek AZERTY (kozh)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituaniek AZERTY (nevez)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniek QUERTY \"linenn sifroù\""
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniek QUERTY \"soniadel\""
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Latvian"
-msgstr "Titouroù"
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr "Makedonia"
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr "Hollandek"
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr "Polonek (reizhadur qwerty)"
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr "Polonek (reizhadur qwerty)"
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr "Portugalek"
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr "Kanadian (Kebek)"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusiek (Yawerty)"
-
-#: ../../keyboard.pm_.c:271
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusiek (Yawerty)"
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr "Rusiek (Yawerty)"
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr "Slovek"
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakek (QWERTZ)"
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakek (QWERTY)"
-
-#: ../../keyboard.pm_.c:279
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Yougoslaviek (reizhadur latin)"
-
-#: ../../keyboard.pm_.c:281
-#, fuzzy
-msgid "Tamil"
-msgstr "Taolenn"
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr "Stokellaoueg Thai"
-
-#: ../../keyboard.pm_.c:284
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Stokellaoueg Thai"
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkek (hengounel doare \"F\")"
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkek (arnevez doare \"Q\")"
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr "Ukrainiek"
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr "Stokellaoueg SUA (etrevroadel)"
-
-#: ../../keyboard.pm_.c:292
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Lituaniek QUERTY \"linenn sifroù\""
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr "Yougoslaviek (latin)"
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:308
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Marc'hañ kelc'hiek %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Logodenn Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Logodenn rummel PS2 rodellek"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Logodenn Kensington Thinking"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 nozelenn"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Logodenn rummel 2 nozelenn"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Rummel"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rodel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "a-steud"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Logodenn rummel 3 nozelenn"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech doare CC"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "Doare MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logodenn Logitech (a-steud, seurt C7 kozh)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Logodenn bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 nozelenn"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 nozelenn"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ebet"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Logodenn ebet"
-
-#: ../../mouse.pm_.c:499
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "FIÑV HO RODELL !"
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr "Disoc'h"
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr "A heul ->"
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr "<- Diaraog"
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr "Ha reizh eo ?"
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Titouroù"
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr "Astenn ar wezenn"
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr "Plegañ ar wezenn"
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr "Gwintañ etre kompez ha rummet dre strollad"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "implijit dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "implijit pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "implijit pptp"
-
-#: ../../network/ethernet.pm_.c:37
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outañ, mar plij."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "kartenn rouedad kavet ebet"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr "Kefluniañ ar rouedad"
-
-#: ../../network/ethernet.pm_.c:203
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Roit ho anv ostiz mar plij.\n"
-"Un anv peurzoareet a zlefe bezañ hini o ostiz,\n"
-"evel ``mabenveg.mastal.makomp.com''.\n"
-"Gallout a rit ivez reiñ chomlec'h IP an dreuzell m'hoc'h eus unan"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr "Anv an ostiz"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Mailh"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Ouzh pe borzh a-steud eo luget ho logodenn ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Kefluniadur ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Amprouiñ ar c'hefluniadur"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-#, fuzzy
-msgid "Which protocol do you want to use?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../network/isdn.pm_.c:199
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Dilaoskel"
-
-#: ../../network/isdn.pm_.c:210
-#, fuzzy
-msgid "Continue"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../network/isdn.pm_.c:216
-#, fuzzy
-msgid "Which is your ISDN card?"
-msgstr "Pehini eo ho takad-eur ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Dibarzhoù sifrennañ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-#, fuzzy
-msgid "Phone number"
-msgstr "Niverenn bellgomz"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Anv ereañ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Diazezet war ur skrid"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Diazezet war un dermenell"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Anv ar domani"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Servijer DNS kentañ (da zilenn)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Eil servijer DNS (da zilenn)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../network/netconnect.pm_.c:50
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:171
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr "O tinoiñ trobarzhelloù..."
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Poent marc'hañ doubl %s"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr "kavoutet %s"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr "kavoutet war %s"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Cable connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-#, fuzzy
-msgid "LAN connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr "kartenn(où) ethernet kavoutet"
-
-#: ../../network/netconnect.pm_.c:206
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Dibabit ar benveg a vennit staliañ"
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:231
-#, fuzzy
-msgid "Internet connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:237
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "Mennout a rit implijout aboot ?"
-
-#: ../../network/netconnect.pm_.c:251
-#, fuzzy
-msgid "Network configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:256
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Skrivit ar c'hefluniadur IP evit ar benveg-mañ mar plij.\n"
-"Pep mellad a zlefe bezañ skrivet evel ur chomlec'h IP e stumm\n"
-"sifroù dekvel pikoù etrezo (da skouer 1.2.3.4)."
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr "O kefluniañ an drobarzhell rouedad %s"
-
-#: ../../network/network.pm_.c:309
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Servijer XFree86 : %s\n"
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Chomlec'h IP"
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maskl rouedad"
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr "IP emgefreek"
-
-#: ../../network/network.pm_.c:314
-#, fuzzy
-msgid "Start at boot"
-msgstr "Krouiñ ur bladennig loc'hañ"
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Er furmad 1.2.3.4 e tlefe bezañ ar chomlec'h IP"
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Roit ho anv ostiz mar plij.\n"
-"Un anv peurzoareet a zlefe bezañ hini o ostiz,\n"
-"evel ``mabenveg.mastal.makomp.com''.\n"
-"Gallout a rit ivez reiñ chomlec'h IP an dreuzell m'hoc'h eus unan"
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr "Servijer DNS"
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr "Trobarzhell an dreuzell"
-
-#: ../../network/network.pm_.c:385
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr "Proksi HTTP"
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr "Proksi FTP"
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr "http://... a zlefe bezañ ar proksi"
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr "ftp://... a zlefe bezañ ar proksi"
-
-#: ../../network/tools.pm_.c:41
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../network/tools.pm_.c:42
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../network/tools.pm_.c:56
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:58
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/tools.pm_.c:82
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartenn"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memor kartenn (DMA)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO kartenn"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 kartenn"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartenn"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-#, fuzzy
-msgid "Provider phone number"
-msgstr "Niverenn bellgomz"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dibarzhoù ar voullerez (da zilenn)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dibarzhoù ar voullerez (da zilenn)"
-
-#: ../../network/tools.pm_.c:95
-#, fuzzy
-msgid "Choose your country"
-msgstr "Dibabit ho stokellaoueg"
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Anv domani"
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Poent marc'hañ"
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-#, fuzzy
-msgid "Account Password"
-msgstr "Tremenger"
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "marc'hañ sac'het : "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Un toull a zo en ho taolenn barzhañ hogen n'hellan ket e implijout.\n"
-"Fiñval ar parzhadurioù kentañ derez evit ma vo an toull stok ouzh ar "
-"parzhadurioù astennet eo an diskoulm"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Assevel adalek ar restr %s sac'het %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Restr gwareziñ siek"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fazi en ur skrivañ er restr %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "a rankfec'h kaout"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "a-bouez"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "brav-tre"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "brav"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "marteze"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Remote printer"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Steud a-bell"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "lpd a-bell"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servijer moullañ"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Moullerezioù lec'hel"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Moullerezio* a-bell"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", Mouluriez USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Fazi en ur skrivañ er restr %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(mollad %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ar servijer SMB"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr " (Dre ziouer)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Diuzit lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Penaos eo luget ar voullerez ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Kefluniadur"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Steud a-bell"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Er furmad 1.2.3.4 e tlefe bezañ ar chomlec'h IP"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-#, fuzzy
-msgid "Port"
-msgstr "Paour"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Amprouiñ ar porzhioù"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Dilesadur"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Poent marc'hañ doubl %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Moullerez USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "N'ev ket Moullerez lec'hel!\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:484
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "O staliañ ar pakad %s"
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:507
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "O staliañ ar pakad %s"
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"A-benn implijout ur steud moulañ lpd a-bell, ret eo deoc'h\n"
-"pourvezañ anv ostiz ar servijer moullañ hag anv as steud\n"
-"war ar servijer-se ma zlefe bezañ kaset an dleadoù moullañ."
-
-#: ../../printerdrake.pm_.c:628
-#, fuzzy
-msgid "Remote host name"
-msgstr "Anv an ostiz a-bell"
-
-#: ../../printerdrake.pm_.c:629
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:632
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Anv an ostiz a-bell"
-
-#: ../../printerdrake.pm_.c:636
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Anv an ostiz a-bell"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dibarzhoù moullañ SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:705
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Evit moullañ war ur voullerez SMB eo ret deoc'h pourvezañ\n"
-"anv an ostiz SMB (Ho evezh ! Disheñvel e c'hell bezañ diouzh\n"
-"e anv ostiz TCP/IP !) ha marteze chomlec'h IP ar servijer moullañ,\n"
-"kement hag anv rannet ar voullerez a glaskit tizhout ha ne vern pe\n"
-"ditour a anv arveriad, tremenger ha strollad labour en implij."
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr "Anv ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr "IP ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr "Anv rannet"
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr "Strollad labour"
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../printerdrake.pm_.c:804
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Evit moullañ war ur voullerez NetWare eo ret deoc'h pourvezañ anv ar\n"
-"servijer moullañ NetWare (Ho evezh ! Disheñvel e c'hell bezañ diouzh e\n"
-"anv ostiz TCP/IP !) kement hag anv ar steud moullañ evit ar voullerez\n"
-"a glaskit tizhout ha ne vern pe anv arveriad ha tremenger en implij."
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr "Servijer moullañ"
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr "Anv ar steud moullañ"
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr "Anv ar voullerez"
-
-#: ../../printerdrake.pm_.c:860
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Dibarzhoù ar voullerez"
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr "Anv ar moullerez"
-
-#: ../../printerdrake.pm_.c:1008
-#, fuzzy
-msgid "Description"
-msgstr "Spisait dibarzhoù"
-
-#: ../../printerdrake.pm_.c:1009
-#, fuzzy
-msgid "Location"
-msgstr "Titouroù"
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1114
-#, fuzzy
-msgid "Your printer model"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "The model is correct"
-msgstr "Ha reizh eo ?"
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-#, fuzzy
-msgid "Select model manually"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:1141
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:1142
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1222
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Kefluniañ ar modem"
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1510
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1567
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ha mennout a rit amprouiñ moullañ skrid ?"
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Test pages"
-msgstr "Amprouiñ ar porzhioù"
-
-#: ../../printerdrake.pm_.c:1585
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1589
-#, fuzzy
-msgid "No test pages"
-msgstr "Ya, moullit an div bajenn arnod"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Print"
-msgstr "Moullerez"
-
-#: ../../printerdrake.pm_.c:1592
-#, fuzzy
-msgid "Standard test page"
-msgstr "Diorren"
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "O voullañ pajenn(où) skrid..."
-
-#: ../../printerdrake.pm_.c:1600
-#, fuzzy
-msgid "Photo test page"
-msgstr "O voullañ pajenn(où) skrid..."
-
-#: ../../printerdrake.pm_.c:1604
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "O voullañ pajenn(où) skrid..."
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr "O voullañ pajenn(où) skrid..."
-
-#: ../../printerdrake.pm_.c:1637
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Pajenn(où) arnod zo bet kaset d'an diaoul moullañ.\n"
-"Ur pennadig e c'hell padout a-raok ma loc'hfe a voullerez.\n"
-"Stad ar moullañ :\n"
-"%s\n"
-"\n"
-"Ha mont a ra en-dro reizh ?"
-
-#: ../../printerdrake.pm_.c:1641
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Pajenn(où) arnod zo bet kaset d'an diaoul moullañ.\n"
-"Ur pennadig e c'hell padout a-raok ma loc'hfe a voullerez.\n"
-"Ha mont a ra en-dro reizh ?"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-#, fuzzy
-msgid "Raw printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-#, fuzzy
-msgid "Close"
-msgstr "Logodenn USB"
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "O tizenaouiñ ar rouedad"
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "O tizenaouiñ ar rouedad"
-
-#: ../../printerdrake.pm_.c:1746
-#, fuzzy
-msgid "Print option list"
-msgstr "Dibarzhoù ar voullerez"
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../printerdrake.pm_.c:1818
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1867
-#, fuzzy
-msgid "New printer name"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Kefluniañ ar voullerez"
-
-#: ../../printerdrake.pm_.c:1899
-#, fuzzy
-msgid "Starting network..."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../printerdrake.pm_.c:1934
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Skramm ket kefluniet"
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1938
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Kefluniañ ar rouedad"
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1982
-#, fuzzy
-msgid "Restarting printing system..."
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:2020
-#, fuzzy
-msgid "high"
-msgstr "Uhel"
-
-#: ../../printerdrake.pm_.c:2020
-#, fuzzy
-msgid "paranoid"
-msgstr "Ankeniet"
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2208
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Diuzit lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:2209
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../printerdrake.pm_.c:2242
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Kefluniañ ar voullerez"
-
-#: ../../printerdrake.pm_.c:2255
-#, fuzzy
-msgid "Installing Foomatic..."
-msgstr "O staliañ ar pakad %s"
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr "Dibarzhoù ar voullerez"
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Kefluniañ ar voullerez"
-
-#: ../../printerdrake.pm_.c:2358
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Mennout a rit kefluniañ ur voullerez ?"
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2418
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Moullerez"
-
-#: ../../printerdrake.pm_.c:2422
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Setu da heul ar steudadoù moullañ.\n"
-"Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#: ../../printerdrake.pm_.c:2423
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Setu da heul ar steudadoù moullañ.\n"
-"Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2467
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Boas"
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../printerdrake.pm_.c:2714
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Kefluniañ ar modem"
-
-#: ../../printerdrake.pm_.c:2716
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-#, fuzzy
-msgid "Print test pages"
-msgstr "O voullañ pajenn(où) skrid..."
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-#, fuzzy
-msgid "Remove printer"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:2789
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:2813
-#, fuzzy
-msgid "Default printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2839
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../printerdrake.pm_.c:2841
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Paour"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "http://... a zlefe bezañ ar proksi"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "ftp://... a zlefe bezañ ar proksi"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Belgian"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Tremenger"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Tremenger ebet"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "An tremegerioù ne glot ket"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "N'hellan ket ouzhpennañ ur parzhadur da RAID md%d _furmadet_"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "N'hellan ket skrivañ e %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid sac'het"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid sac'het (raidtools a vank emichañs ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ket a-walc'h a parzhadurioù evit RAID live %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ur steuñvaer urzhiadoù mareadek."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"servijout a ra apmd evit evezhiañ stad an daspugner hag he enrollañ dre "
-"syslog.\n"
-"Gallout a ra ivez servijout da lazhañ an ardivink pa vez izel an daspugner."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Seveniñ an urzhiadoù steuñvaet gant an urzhiad at d'ar pred laket pa 'z eo\n"
-"bet sevenet at, ha seveniñ urzhiadoù dre lod pa 'z eo izel a-walc'h ar garg."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Ur goulev standard UNIX eo cron evit seveniñ goulevioù diouzh c'hoant an\n"
-"arveriaded da goulzoù mareadek steuñvaet. vixie cron a ouzhpenn kalzig a "
-"arc'hweloù\n"
-"d'ar cron UNIX diazez, en o zouez surentez ha dibarzhoù kefluniañ gwelloc'h."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM a zegas implij al logodenn d'an arloadoù Linux mod-skrid evel\n"
-"Midnight Commander. Reiñ a ra tu da seveniñ obererezhoù troc'hañ-ha-pegañ,\n"
-"ha skor evit meuziadoù kemperzhel war al letrin."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Ur servijer evit ar Gwiad Bedel eo Apache. Implijet e vez evit servijañ\n"
-"restroù HTML ha CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"An diaoul gourservijer kenrouedad (anvet inetd ordinal) a loc'h ur\n"
-"bochad a servijoù kenrouedad all diouzh an ezhomm. E karg loc'hañ meur a "
-"servijoù\n"
-"eo, en o zouez telnet, ftp, rsh, and rlogin. Dizoberiañ inetd a zizoberia\n"
-"an holl servijoù m'eo eñ atebek warno."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ar pakad-mañ a garg ar stokellaoueg diuzet evel termenet e\n"
-"/etc/sysconfig/keyboard. Dre ar maveg kbdconfig e c'hell bezañ diuzet\n"
-"kement-se. Gwell deoc'h leuskel se gweredekaet war darn vuiañ an ardivinkoù."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"An diaoul moullañ ret evit ma dafez en-ro reizh lpr eo lpd. Dre vras\n"
-"ez eo ur servijer a vera dleadoù moullañ evir ar voullerez(ed)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) a zo ur Servijer Anvioù Domani (DNS) a zo implijet evit\n"
-"amdreiñ anvioù ostiz e chomlec'hioù IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Evit marc'hañ ha divarc'hañ poentoù marc'hañ an holl Reizhiadoù Restroù\n"
-"Rouedad (NFS), SMB (Lan Manager/Windows) ha NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Oberia/Dizoberia an holl etrefasoù rouedad kefluniet da lañsañ\n"
-"da vare al loc'hañ."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS a zo ur c'homenad brudet evit rannañ restroù dre rouedadoù TCP/IP.\n"
-"Ar servij-mañ a bourvez arc'hweloù ur servijer NFS, a vez kefluniaet dre ar\n"
-"restr /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS a zo ur c'homenad brudet evit rannañ restroù dre rouedadoù\n"
-"TCP/IP. Ar servij-mañ a bourvez un arc'hwel morailhañ restroù NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Skorañ PCMCIA a zegas an tu da implijonut traoù evel ethernet ha modemoù\n"
-"e urzhiataeroù hezoug. Ne vo ket kroget hep bezañ bet kefluniet, rak-se eo "
-"diarvar\n"
-"e staliañ war ardivinkoù n'o deus ket ezhomm anezhañ."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ar c'hartenner porzhioù a vera kevreadennoù RPC, a zo implijet gant\n"
-"komenadoù evel NFS ha NIS. Ar servijer kartenn-porzhioù a rankfe mont en-"
-"dro\n"
-"war ardivinkoù anezho servijerien komenadoù a implij ar reizhiad  RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Ur Gwazour Treuzdougen Postel eo Postfix, a zo ar goulev a\n"
-"zilech posteloù etre un ardivink hag un all."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Enroll hag assav poul dizurzh ar reizhiad evit genel niveroù\n"
-"dargouezhek gant gwelloc'h perzhded."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"An diaoul routed a ro an tu da vremanaat ent emgefreek an taolenn henchañ\n"
-"IP dre ar c'homenad RIP. Tra ma vez implijet aliesig RIP war rouedadoù "
-"bihan,\n"
-"ezhomm a zo komenadoù henchañ kemplezhoc'h evit rouedadoù rouestlet."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ar c'homenad rstat a ro tu da implijerien ur rouedad da zastum\n"
-"muzulioù barregezh diwar ne vern pe ardivink er rouedad-se."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ar c'homenad rusers a ro tu da implijerien ur rouedad da anavezout piv\n"
-"a zo kevreet ouzh ardivinkoù all a respont."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ar c'homenad rwho a bourchas da implijerien a-bell roll an holl arveriaded a "
-"zo\n"
-"kevreet ouzh un ardivink ma da en-dro warnañ an diaoul rwhod (heñvel ouzh "
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog a zo ur gwazerezh ma enroll drezañ an diaouled niverus o "
-"c'hemennadoù\n"
-"e kerzhlevrioù liesseurt ar reizhiad. Ur mennozh mat eo seveniñ ingal syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Enaou ha dizenaou ar servijer Fontoù X da vare al loc'hañ hag al lazhañ."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Dibabit pe servijoù a zlefe bezañ lañset ent emgefreek pa loc'her"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Moullerez"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "dedennus"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-#, fuzzy
-msgid "System"
-msgstr "Reizhiad/Diazez"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Stlennvonioù"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "trobarzhell"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Ho evezh"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Ouzhpennañ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Gwrizienn"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Meuziad Lañsañ"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Rann"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Amprouiñ ar c'hefluniadur"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "dedennus"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Liesvedia"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Diorren"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Anv ar gevreadenn"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Etrefas arveriad/X"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Anv ar servijer SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "C'hoarioù"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "O staliañ pakadoù..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"N'hellañ ket lenn ho taolenn barzhañ, re vrein eo evidon :(\n"
-"Klask a rin kenderc'hel en ur ziverkañ ar parzhadurioù siek"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fazi!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:83
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "O krouiñ ur bladennig staliañ emgefreek"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gourc'hemennoù!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Staliañ"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Ouzhpennañ un arveriad"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "O furmadiñ ar restr saveteiñ %s"
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:604
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:655
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:676
-#, fuzzy
-msgid " Error during mail sending. \n"
-msgstr "Fazi en ur lenn ar restr %s"
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-#, fuzzy
-msgid "File Selection"
-msgstr "Diuzadenn strollad pakadoù"
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:782
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:801
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Lemel ar steudad"
-
-#: ../../standalone/drakbackup_.c:889
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:928
-#, fuzzy
-msgid "Users"
-msgstr "Anv arveriad"
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:957
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Klaskit adarre mar plij"
-
-#: ../../standalone/drakbackup_.c:972
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Klaskit adarre mar plij"
-
-#: ../../standalone/drakbackup_.c:978
-#, fuzzy
-msgid "Remember this password"
-msgstr "Tremenger ebet"
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Diuzit lugerezh ar voullerez"
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Dibabit reizhadur ho stokellaoueg, mar plij."
-
-#
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Klikit war ur parzhadur mar plij"
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1096
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1143
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:1257
-#, fuzzy
-msgid "Network"
-msgstr "Taolenn"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1302
-#, fuzzy
-msgid "Use daemon"
-msgstr "Anv arveriad"
-
-#: ../../standalone/drakbackup_.c:1307
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: ../../standalone/drakbackup_.c:1313
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Implijout gwelladur ar bladenn galet ?"
-
-#: ../../standalone/drakbackup_.c:1319
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Rouedad/Diaouled"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr "Petra"
-
-#: ../../standalone/drakbackup_.c:1406
-msgid "Where"
-msgstr "Pelec'h"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "When"
-msgstr "Pa"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "More Options"
-msgstr "Dibarzhoù ar mollad :"
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/drakbackup_.c:1453
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1530
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: ../../standalone/drakbackup_.c:1531
-#, fuzzy
-msgid "Backup system"
-msgstr "Kefluniañ reizhiadoù restroù"
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Parzhadur"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1745
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1776
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1876
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1962
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:1964
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:1992
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:2073
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Assevel adalek ar pladennig"
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2133
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:2135
-#, fuzzy
-msgid "Other Media"
-msgstr "All"
-
-#: ../../standalone/drakbackup_.c:2141
-#, fuzzy
-msgid "Restore system"
-msgstr "Staliañ ar reizhiad"
-
-#: ../../standalone/drakbackup_.c:2142
-#, fuzzy
-msgid "Restore Users"
-msgstr "Adaozañ adalek ar restr"
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Restore Other"
-msgstr "Adaozañ adalek ar restr"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2215
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Neuziet"
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr "Skoazell"
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr "Diaraog"
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Enrollañ"
-
-#: ../../standalone/drakbackup_.c:2307
-#, fuzzy
-msgid "Build Backup"
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-#, fuzzy
-msgid "Restore"
-msgstr "Adaozañ adalek ar restr"
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr "A heul"
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2512
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Dibabit pakadoù da staliañ"
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2563
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../standalone/drakbackup_.c:2584
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../standalone/drakbackup_.c:2606
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2729
-#, fuzzy
-msgid "Backup system files"
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:2731
-#, fuzzy
-msgid "Backup user files"
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:2733
-#, fuzzy
-msgid "Backup other files"
-msgstr "Restr gwareziñ siek"
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2761
-#, fuzzy
-msgid "Sending files..."
-msgstr "Enrollañ er restr"
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2889
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2913
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: ../../standalone/drakbackup_.c:2979
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/drakbackup_.c:3010
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/drakbackup_.c:3014
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/drakbackup_.c:3018
-#, fuzzy
-msgid "Backup Now"
-msgstr "Kefluniañ reizhiadoù restroù"
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-"Copyright (C) 2001 MandrakeSoft gant DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Staliadur %s a zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:68
-#, fuzzy
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/drakfloppy_.c:69
-#, fuzzy
-msgid "Module name"
-msgstr "Dibarzhoù ar mollad :"
-
-#: ../../standalone/drakfloppy_.c:69
-#, fuzzy
-msgid "Size"
-msgstr "Ment: %s"
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-#, fuzzy
-msgid "drakfloppy"
-msgstr "Assevel adalek ar pladennig"
-
-#: ../../standalone/drakfloppy_.c:91
-#, fuzzy
-msgid "boot disk creation"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr "dre ziouer"
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:126
-#, fuzzy
-msgid "kernel version"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../standalone/drakfloppy_.c:132
-#, fuzzy
-msgid "General"
-msgstr "Rummel"
-
-#: ../../standalone/drakfloppy_.c:137
-#, fuzzy
-msgid "Expert Area"
-msgstr "Mod mailh"
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:141
-#, fuzzy
-msgid "Add a module"
-msgstr "Ouzhpennañ un arveriad"
-
-#: ../../standalone/drakfloppy_.c:161
-#, fuzzy
-msgid "force"
-msgstr "Dilec'hiañ"
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:200
-#, fuzzy
-msgid "Remove a module"
-msgstr "Eilpennañ urzh ar pajennoù"
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:427
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:254
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s ket kavet"
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-#, fuzzy
-msgid "done"
-msgstr "Graet"
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:351
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Furmadiñ ar bladennig"
-
-#: ../../standalone/drakfont_.c:354
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "O prientiñ ar staliadur"
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:470
-#, fuzzy
-msgid "xfs restart"
-msgstr "strishaat"
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:551
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Furmadiñ parzhadurioù"
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "O tistaliañ ar RPMoù"
-
-#: ../../standalone/drakfont_.c:571
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Kefluniadur"
-
-#: ../../standalone/drakfont_.c:573
-#, fuzzy
-msgid "Font List"
-msgstr "Poent marc'hañ"
-
-#: ../../standalone/drakfont_.c:740
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Dibabit ar parzhadur a vennit furmadiñ"
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:748
-#, fuzzy
-msgid "StarOffice"
-msgstr "Burev"
-
-#: ../../standalone/drakfont_.c:752
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:756
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Moullerez"
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:829
-#, fuzzy
-msgid "Install List"
-msgstr "Staliañ ar reizhiad"
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-#, fuzzy
-msgid "Selected All"
-msgstr "Diuzit ar restr"
-
-#: ../../standalone/drakfont_.c:898
-#, fuzzy
-msgid "Remove List"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:916
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:918
-#, fuzzy
-msgid "Post Install"
-msgstr "Staliañ"
-
-#: ../../standalone/drakfont_.c:936
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:937
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Dilezel ar staliadur"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-#, fuzzy
-msgid "disable"
-msgstr "Taolenn"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-#, fuzzy
-msgid "reconfigure"
-msgstr "Kefluniañ X"
-
-#: ../../standalone/drakgw_.c:142
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "O tinoiñ trobarzhelloù..."
-
-#: ../../standalone/drakgw_.c:150
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-#, fuzzy
-msgid "enable"
-msgstr "Taolenn"
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:176
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "dedennus"
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Skramm ket kefluniet"
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:273
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Kefluniadur goude staliañ"
-
-#: ../../standalone/drakgw_.c:274
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Kefluniañ ar modem"
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:294
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ar servijer SMB"
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:321
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:329
-#, fuzzy
-msgid "Configuring..."
-msgstr "Kefluniañ IDE"
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:366
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "O staliañ ar pakad %s"
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:568
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:573
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:580
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "marc'hañ sac'het : "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Anv an ostiz : "
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Seurt : "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Treuzell : "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Kefluniañ servijoù"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "Servijer"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Meuziad Lañsañ"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Skoazeller..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Amprouiñ ar c'hefluniadur"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Bevaat"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Bevaat"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Treuzell"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr "O termeniñ al live surentez"
-
-#: ../../standalone/draksec_.c:57
-#, fuzzy
-msgid "Setting security user"
-msgstr "O termeniñ al live surentez"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Dibabit ar benveg a vennit staliañ"
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadian (Kebek)"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "China (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "France [SECAM]"
-msgstr "Gall"
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandek"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-#, fuzzy
-msgid "Australia"
-msgstr "a-steud"
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:76
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:131
-#, fuzzy
-msgid "There was an error while scanning for TV channels"
-msgstr "Ur fazi a zo bet en ur staliañ ar pakadoù :"
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Dibabit reizhadur ho stokellaoueg, mar plij."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Kemmañ ar spister"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Kemmit ho Cd-Rom!\n"
-"\n"
-"Lakait el lenner ar Cd-Rom warnañ an diketenn \"%s\" mar plij ha gwaskit Mat "
-"eo da c'houde.\n"
-"Ma n'emañ ket ganeoc'h gwaskit Nullañ evit chom hep staliañ ar Cd-Rom-se."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "Restroù :\n"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Restr/_Enrollañ"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Restr/-"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Parzhadur"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Parzhadur"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Anv arveriad"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Amprouiñ ar porzhioù"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-#, fuzzy
-msgid "search"
-msgstr "Klask"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "O vrasjediñ"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Dibabit un obererezh"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "O prientiñ ar staliadur"
-
-#: ../../standalone/logdrake_.c:407
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../standalone/logdrake_.c:408
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:416
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:421
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:424
-#, fuzzy
-msgid "service setting"
-msgstr "dedennus"
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:435
-#, fuzzy
-msgid "load setting"
-msgstr "O furmadiñ"
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:449
-#, fuzzy
-msgid "alert configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:493
-#, fuzzy
-msgid "Save as.."
-msgstr "Meuziad Lañsañ"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb kavet ebet\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Kendarvan an trede nozelenn ?"
-
-#: ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "O tinoiñ trobarzhelloù..."
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Diuzit ur gartenn c'hrafek"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Trobarzhell loc'hañ"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Dibabit ho yezh"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Diuzit renkad ar staliadur"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Dinoiñ ar bladenn galet"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Kefluniañ al logodenn"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Dibabit ho stokellaoueg"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "rodellek"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Kefluniañ reizhiadoù restroù"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Furmadiñ parzhadurioù"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Dibabit pakadoù da staliañ"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Staliañ ar reizhiad"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ouzhpennañ un arveriad"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Kefluniañ ur rouedad"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Kefluniañ servijoù"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Staliañ ar c'harger loc'hañ"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Krouiñ ur bladennig loc'hañ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Kefluniañ X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Staliañ ar reizhiad"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Dilezel ar staliadur"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Fazi en ur zigeriñ %s evit skrivañ : %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Gortozit mar plij, o prientiñ ar staliadur"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Burev"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Database"
-msgstr "Stlennvonioù"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Teuliadur"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Kefluniañ ar proksioù"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Kefluniadur"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Titouroù"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servijer"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Teuliadur"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "dedennus"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Titouroù"
-
-#~ msgid "Complete (%dMB)"
-#~ msgstr "Boas (%dMo)"
-
-#~ msgid "Minimum (%dMB)"
-#~ msgstr "Bihanañ (%d Mo)"
-
-#~ msgid "Recommended (%dMB)"
-#~ msgstr "Erbedet (%dMo)"
-
-#~ msgid "CDROM / DVDROM"
-#~ msgstr "CDROM / DVDROM"
-
-#, fuzzy
-#~ msgid "Utilities"
-#~ msgstr "Mavegoù/Skrid"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Marc'hañ"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ebet"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Dibabit ar ment nevez"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#~ msgid "You may now provide options to module %s."
-#~ msgstr "Bremañ e c'hellit pourvezañ e zibarzhoù d'ar mollad %s"
-
-#~ msgid "mount failed"
-#~ msgstr "marc'hañ sac'het"
-
-#~ msgid "Low"
-#~ msgstr "Izel"
-
-#~ msgid "Medium"
-#~ msgstr "Etre"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Nebeut a wellaenoù evit al live surentez-mañ, an hini pouezusañ eo bezañ\n"
-#~ "muioc'h a evezhiadennoù hag a wiriadennoù surentez."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Liesvedia"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Mailh"
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Bremañ e c'hellit diuz ho takad-eur diouzh al lec'h ma chomit ennañ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Linux a vera an eur e GMT pe \"Greenwich Mean Time\" hag e amdreiñ a ra\n"
-#~ "en eur lec'hel hervez an takad-eur hoc'h eus diuzet."
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Anv ar gevreadenn"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Anv ar gevreadenn"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Kefluniañ ur rouedad"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Titouroù"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Titouroù"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Anv arveriad"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Ur servijer evit ar Gwiad Bedel eo Apache. Implijet e vez evit servijañ\n"
-#~ "restroù HTML ha CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) a zo ur Servijer Anvioù Domani (DNS) a zo implijet evit\n"
-#~ "amdreiñ anvioù ostiz e chomlec'hioù IP."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#~ msgid "Active"
-#~ msgstr "Bevaat"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Ur voullerez, doare \"%s\", zo bet dinoet war "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Trobarzhell voullerez lec'hel"
-
-#~ msgid "Printer Device"
-#~ msgstr "Trobarzhell ar voullerez"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Dibabit ar ment a vennit staliañ"
-
-#~ msgid "Total size: "
-#~ msgstr "Ment hollek : "
-
-#~ msgid "Please wait, "
-#~ msgstr "Gortozit mar plij,"
-
-#~ msgid "Total time "
-#~ msgstr "Amzer hollek"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Implijout ar c'hefluniadur o ren evit X11 ?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Ouzh pe drobarzhell eo luget ho moullerez  \n"
-#~ "(taolit evezh /dev/lp0 a zo kevatal da LPT1:) ?\n"
-
-#~ msgid "New"
-#~ msgstr "Nevez"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Amsklaer (%s), bezit spisoc'h\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr "? (%s dre ziouer)"
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Ho tibab ? (%s dre ziouer, skrivit `none' evit hini ebet)"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Dibabit ar reizhadur a glot gant ho stokellaoueg er roll a-us"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Diuzit :\n"
-#~ "\n"
-#~ "  - Neuziet : Ma 'z oc'h kustumet a-walc'h gant GNU/Linux, tu vo neuze "
-#~ "deoc'h\n"
-#~ "    dibab an implij pennañ evit ho ardivink. Sellit a-is evit munudoù.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Mailh : Ma 'z oc'h en ho pleud gant GNU/Linux ha mennet da seveniñ\n"
-#~ "    ur staliadur neuziet-tre. Evel evit ar renkad staliañ \"Neuziet\" e "
-#~ "vo\n"
-#~ "    tu deoc'h diuz an implij evit hor reizhiad.\n"
-#~ "    Hogen mar plij, NA ZIBABIT KET SE NEMET MA OUZIT PEZH EMAOC'H OC'H "
-#~ "OBER !"
-
-#, fuzzy
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t  will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "An dibaboù liessek evit implij ho ardivink (en ur c'houlakaat neuze hoc'h "
-#~ "eus\n"
-#~ "dibabet pe \"Neuziet\" pe \"Mailh\" da renkad staliañ) a zo evel a-"
-#~ "heul :\n"
-#~ "\n"
-#~ "  - Boas : dibabit se ma 'z oc'h mennet da implijout ho ardivink dreist-"
-#~ "holl\n"
-#~ "    evit un implij pemdeziek (labour burev, aozerezh grafikoù hag all). "
-#~ "Na\n"
-#~ "    c'hortozit ket e vije staliaet nep kempuner, maveg diorren h.a.\n"
-#~ "\n"
-#~ "  - Diorren : evel m'hen diskouez an anv. Dibabit se ma 'z oc'h mennet "
-#~ "da\n"
-#~ "    implijout ho ardivink dreist-holl evit diorren meziantoù. Neuze ho po "
-#~ "un\n"
-#~ "    heuliad klok a meziantoù staliet a-benn kempunañ, dizraenañ ha "
-#~ "furmadiñ\n"
-#~ "    kod tarzh, pe grouiñ pakadoù meziantel.\n"
-#~ "\n"
-#~ "  - Servijer : dibabit se m'eo gouestlet an ardivink a stalhit Mandrake "
-#~ "Linux\n"
-#~ "    warnañ da vezañ impliet evel servijer.  ur servijer restroù (NFS pe "
-#~ "SMB),\n"
-#~ "    ur servijer moullañ (moullañ diouzh komenad Unix lp (line printer) pe "
-#~ "zoare\n"
-#~ "    Windows SMB), ur servijer dilesadur (NIS), ur servijer stlennvon hag "
-#~ "all.\n"
-#~ "    Da heul, na c'hortozit staliadur tamm kinkladur ebet (KDE, "
-#~ "GNOME...).\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Gallout a rit bremañ diuz ar strollad pakadoù a vennit\n"
-#~ "staliañ pe vremanaat.\n"
-#~ "\n"
-#~ "DrakX a glasko neuze hag-eñ hoc'h eus egor a-walc'h evit staliañ an holl "
-#~ "anezho.\n"
-#~ "Ma n'hoc'h eus ket, e kemenno deoc'h. Ma vennit kenderc'hel evelato, e "
-#~ "seveno staliadur\n"
-#~ "an holl strolladoù diuzet hogen e laosko pakadoù 'zo dezho nebeutoc'h a\n"
-#~ "dalvoudegezh. E traoñ ar roll e c'hellit diuz an dibarzh\n"
-#~ "\"Diuz pakadoù unan hag unan\" ; en degouezh-se e vo ret deoc'h furchal\n"
-#~ "a-dreuz tremen 1000 pakad..."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Gallout a rit bremañ skrivañ dibarzhoù sifrennañ. Ma n'oc'h ket sur "
-#~ "petra\n"
-#~ "skrivañ, an titouroù reizh ho po digant ho PMG."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Skrivit :\n"
-#~ "\n"
-#~ "  - Chomlec'h IP : m'eo dianav deoc'h, goulennit digant merour ho "
-#~ "rouedad.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Rouedmaskl : \"255.255.255.0\" a zo peurvuiañ un dibab mat. M'hoc'h "
-#~ "eus\n"
-#~ "douetañs, goulennit digant merour ho rouedad.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - IP emgefreek : Ma ra ho rouedad gant ar c'homenad bootp pe dhcp, "
-#~ "diuzit \n"
-#~ "an dibarzh-se. Ma vez diuzet, n'eus ezhomm talvoud ebet er \"Chomlec'h IP"
-#~ "\".\n"
-#~ "M'hoc'h eus douetañs, goulennit digant merour ho rouedad.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ma implij ho rouedad NIS, diuzit \"Implijout NIS\". Ma ne ouzit ket, "
-#~ "goulennit\n"
-#~ "digant merour ho rouedad."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Gallout a rit bremañ skrivañ dibarzhoù sifrennañ. Ma n'oc'h ket sur "
-#~ "petra\n"
-#~ "skrivañ, an titouroù reizh ho po digant ho PMG."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ma implijit proksioù, keflugnit anezho bremañ mar plij. Ma ne ouzit ket "
-#~ "hag\n"
-#~ "e rankit implijout proksioù, goulennit digant merour ho rouedad pe ho PMG."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Staliañ pakadoù rinegouriezh a c'hellit m'eo bet kefluniet reizh ho\n"
-#~ "kevreadenn ouzh ar Genrouedad. Dibabit da gentañ ur melezour a vennit "
-#~ "ezkargañ\n"
-#~ "pakadoù diwarnañ ha da c'houde diuzit ar pakadoù da staliañ.\n"
-#~ "\n"
-#~ "Taolit evezh e rankit diuz ar melezour hag ar rinegouriezh hervez al\n"
-#~ "lezennoù o ren du-se."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Bremañ e c'hellit krouiñ unan pe vuioc'h a gont(où) arveriad \"boutin\",\n"
-#~ "dre enebiez ouzh ar gont arveriad \"dreistwiriet\", root hec'h anv. "
-#~ "Gallout\n"
-#~ "a rit krouiñ unan pe vuioc'h a gont(où) evit kement den a fell deoc'h\n"
-#~ "aotren da implijout an urzhiataer. Taolit evezh pep kont arveriad he\n"
-#~ "devo he dibarzhoù dezhi (endro grafikel, kefluniadur ar goulevioù,\n"
-#~ "h.a.) hag he renkell \"Er-gêr\" dezhi, ma vo enrollet an dibarzhoù-se\n"
-#~ "enni.\n"
-#~ "\n"
-#~ "\n"
-#~ "Da gentañ holl, krouit ur gont evidoc'h-chwi ! Ha pa vefec'h arveriad "
-#~ "nemetañ\n"
-#~ "an ardivink, ARABAT deoc'h ereañ evel root evit implij pemdeziek ar "
-#~ "reizhiad : \n"
-#~ "arvarus-kenañ eo a-fet surentez. Ur fazi stokell a zo a-walc'h evit "
-#~ "lakaat\n"
-#~ "boud ho reizhiad.\n"
-#~ "\n"
-#~ "\n"
-#~ "Gant se, gwelloc'h vije deoc'h ereañ ouzh ar reizhiad en ur implijout ar\n"
-#~ "gont arveriad ho po krouet amañ, hag ereañ evel root evit kefridioù a\n"
-#~ "vererezh ha trezerc'hel hepken."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Setu dibaboù pennañ LILO ha grub :\n"
-#~ "  - Trobarzhell loc'hañ : a dermen anv an drobarzhell (da sk. parzhadur\n"
-#~ "ur bladenn galet) a zo enni ar rann loc'hañ. Nemet ma ouifec'h a-zevri\n"
-#~ "ez eo disheñvel, dibabit \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Gedvezh a-raok loc'hañ ar skeudenn dre ziouer : a spisa an niver a\n"
-#~ "zekvet eilennoù a rankfe gortoz ar c'harger loc'hañ kent loc'hañ ar "
-#~ "skeudenn\n"
-#~ "gentañ. Talvoudus eo war reizhiadoù a loc'h diouzhtu adalek ar bladenn "
-#~ "galet\n"
-#~ "goude bezañ enaouet ar stokellaoueg. Ne gortoz ket ar c'harger loc'hañ "
-#~ "m'eo\n"
-#~ "disoñjet \"gedvezh\" pe dermenet da mann.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Mod video : a spisa ar mod skrid VGA a rankfe bezañ diuzet pa "
-#~ "loc'her.\n"
-#~ "An talvoudoù a heul a zo hegerz :\n"
-#~ "    * boas : a ziuz ar mod skrid 80x25 boas.\n"
-#~ "    * <niver> : a implij ar mod skrid a zegouezh."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Bremañ eo poent kefluniañ ar reizhiad X Window, a zo kraonienn\n"
-#~ "EGA (Etrefas Grafikel Arveriad) Linux. Evit ar c'hefridi-se, ret eo\n"
-#~ "deoc'h kefluniañ ho kartenn grafek hag ho skramm. Emgefreek eo ar bras\n"
-#~ "eus al lankadoù-se, evelato, neuze gwiriañ pezh a zo bet graet hag\n"
-#~ "asantiñ d'ar c'hefluniadur a zlefe bezañ ho labour :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Pa 'z eo graet ar c'hefluniañ, lañset e vo X (nemet ma c'houlennit\n"
-#~ "digant DrakX chom hep hen ober) e seurt ma c'hellit gwiriañ ha\n"
-#~ "sellet ha plijet oc'h gant an dibarzhoù. Ma n'oc'h ket, e c'hellit\n"
-#~ "mont war gil hag o c'hemmañ, ken lies gwech ha ma karot."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "M'eo siek un dra bennak en ho kefluniadur X, implijit an dibarzhoù-se\n"
-#~ "a-benn kefluniañ reizh ar reizhiad X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ma kavit gwelloc'h implijout un ereadur grafikel, diuzit \"Ya\". Mod "
-#~ "all,\n"
-#~ "diuzit \"Ket\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Emañ ho reizhiad war-nes adloc'hañ.\n"
-#~ "\n"
-#~ "Goude adloc'hañ, kargañ a raio ho reizhiad Mandrake Linux nevez ent "
-#~ "emgefreek.\n"
-#~ "Ma vennit loc'hañ ur reizhiad korvoiñ all, lennit ar gourc'hemennoù "
-#~ "ouzhpenn\n"
-#~ "mar plij."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skrivañ /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Furmadiñ an holl"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Goude furmadiñ an holl barzhadurioù,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "kollet e vo holl roadoù war ar parzhadurioù-se"
-
-#~ msgid "Reload"
-#~ msgstr "Adkargañ"
-
-#~ msgid "Remote queue"
-#~ msgstr "Steud a-bell"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ya, moullit ur bajenn arnod ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ya, moullit ur bajenn arnod PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ment ar paper"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Stlepel ar bajenn goude moullañ ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Dibarzhoù ar sturier Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Dibarzhoù donder liv"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Moullañ skrid evel PostScript ?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Kempenn an efed-diri ?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Niver a bajennoù dre bajenn ziskas"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marzoù Dehoù/Kleiz e poentoù (1/72 ur meudad)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marzoù Krec'h/Traoñ e poentoù (1/72 ur meudad)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Dibarzhoù GhostScript ouzhpenn"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Dibarzhoù skrid ouzhpenn"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Pep steud moullañ (m'eo kaset an dleadoù moullañ davetañ) en deus\n"
-#~ "ezhomm un anv (lp alies) hag ur renkell spool kevret gantañ. Pe anv\n"
-#~ "ha renkell a zo da implijout evit ar steud-mañ ha penaos eo luget ar "
-#~ "voullerrez ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Anv ar steud"
-
-#~ msgid "Spool directory"
-#~ msgstr "Renkell ar spool"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Evit sevel ur reizhiad suroc'h, gwelloc'h deoc'h diuz \"Implijout ur "
-#~ "restr kuzhet\"\n"
-#~ "hag \"Implijout tremegerioù MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ma implij ho rouedad NIS, diuzit \"Implijout NIS\". Ma ne ouzit ket, "
-#~ "goulennit\n"
-#~ "digant merour ho rouedad."
-
-#~ msgid "yellow pages"
-#~ msgstr "pajennoù melen"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "An urzhiaoueg loc'hañ a glask kargañ molladoù evit ho logodenn usb."
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Sujedigezh emgefreek"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Kefluniañ LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Krouiñ ur bladennig loc'hañ"
-
-#~ msgid "Choice"
-#~ msgstr "Dibab"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "A bep seurt"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Goulennoù a bep seurt"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "N'hellan ket implijout supermount el live surentez uhel"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Servijer DNS kentañ"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Eil servijer DNS"
-
-#~ msgid "loopback"
-#~ msgstr "saveteiñ"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Pe garger(ien) loc'hañ a vennit imlijout ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Pladennig staliañ emgefreek"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Klask kavout ur modem ?"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Kefluniañ an takad-eur"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(a c'hell breinañ roadoù)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Enaouiñ KrouilhNiv pa loc'her"
-
-#~ msgid "DNS server:"
-#~ msgstr "Servijer DNS :"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Trobarzhell an dreuzell :"
-
-#~ msgid "Customized"
-#~ msgstr "Neuziet"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Implijout ur restr kuzhet"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Implijout tremegerioù MD5"
-
-#~ msgid "Package"
-#~ msgstr "Pakad"
-
-#~ msgid "Tree"
-#~ msgstr "Gwezenn"
-
-#~ msgid "Sort by"
-#~ msgstr "Rummañ dre"
-
-#~ msgid "Category"
-#~ msgstr "Rummad"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pakadoù staliet"
-
-#~ msgid "Available packages"
-#~ msgstr "Pakadoù hegerz"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Diskouez an delioù hepken"
-
-#~ msgid "Expand all"
-#~ msgstr "Astenn pep tra"
-
-#~ msgid "Collapse all"
-#~ msgstr "Plegañ pep tra"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Ouzhpennañ lec'hiadur ar pakadoù"
-
-#~ msgid "Update location"
-#~ msgstr "Bremanaat al lec'hiadur"
-
-#~ msgid "Find Package"
-#~ msgstr "Kavout ur pakad"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Kavout ur pakad ennañ ur restr"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Gwintañ etre Staliet hag Hegerz"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "O wiriañ sujedigezhioù"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ar pakadoù a-heul a zo war-nes bezañ distaliet"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Pe bakad a glask"
-
-#~ msgid "No match"
-#~ msgstr "Klotadur ebet"
-
-#~ msgid "No more match"
-#~ msgstr "Klotadur ouzphenn ebet"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Emañ rpmdrake er mod ``memor izel'' evit poent.\n"
-#~ "Adlañsañ a rin rpmdrake tuchantik evit aotren da glask restroù"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Pe restr emaoc'h o klask ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Petra emaoc'h o klask ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Roit din un anv (da sk. `ouzhpenn', `kenwerzhel')"
-
-#~ msgid "Directory"
-#~ msgstr "Renkell"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Cdrom hegerz ebet (netra e /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL ar renkell enni ar RPMoù"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Evit FTP hag HTTP eo ret deoc'h reiñ lec'hiadur an hdlist\n"
-#~ "Da geñver an URL a-us e rank bezañ"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Leugnit ar stlenn a-heul mar plij"
-
-#~ msgid "%s is already in use"
-#~ msgstr "War implij eo %s endeo"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "O vremanaat an diaz RPMoù"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "War-nes dilemel an enmont %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "O klask delioù"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Klask delioù a bad ur frapadig"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (a-bouez)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (brav-tre)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (brav)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Ouzh pe borzh a-steud eo luget ho logodenn ?"
-
-#~ msgid "Czech"
-#~ msgstr "Tchek"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovakek"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Pe seurt parzhadur a vennit ?"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Kement parzhadur a zo bet nevez termenet a zle bezañ furmadet a-benn\n"
-#~ "e implijout (furmadiñ a dalvez krouiñ ur reizhiad restroù). Er poent-se,\n"
-#~ "e c'hellit mennout adfurmadiñ parzhadurioù 'zo o vezañ endeo evit "
-#~ "diverkañ\n"
-#~ "ar roadoù a zo enno. Ho evezh : n'eo ket ret adfurmadiñ parzhadurioù o\n"
-#~ "vezañ endeo, dreist-holl ma 'z eus enno restroù pe roadoù a vennit "
-#~ "derc'hel.\n"
-#~ "Skouerioù dibar eo /home ha /usr."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Emañ ar pakadoù diuzet o vezañ staliaet bremañ. Un nebeut munut\n"
-#~ "e zlefe padout an obererezh-se nemet m'ho pije dibabet bremanaat\n"
-#~ "ur reizhiad o vezañ, en degouezh-se e c'hell kemer muioc'h a amzer\n"
-#~ "zoken a-raok na grogfe ar bremanaat."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Disoñjal ar c'hemmoù"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Peseurt eo ho logodenn ?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Spisterioù emgefreek"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "A-benn kavout ar spisterioù hegerz e klaskin meur a hini.\n"
-#~ "C'hwildañ a raio ho skramm...\n"
-#~ "Gallout a rit e tizenaouiñ ma fell deoc'h, klevet a rit ur bip pa vo echu"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Klask kavout ar spisterioù hegerz a c'hellan (da sk. 800x600).\n"
-#~ "A-wechoù, evelato, e c'hell sac'hañ an ardivink.\n"
-#~ "Mennout a rit klask ?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Mod reizh ebet kavet\n"
-#~ "Klaskit gant ur gartenn video pe ur skramm all"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Klask ent emgefreek ar spisterioù"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Logodenn Apple ADB"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Logodenn Apple ADB (2 nozelenn)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Logodenn Apple ADB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Logodenn Apple ADB "
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Logodenn Apple USB (2 nozelenn)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Logodenn Apple USB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Logodenn bus ATI"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Logodenn bus Microsoft"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logodenn bus Logitech"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Logodenn USB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Stumm 2.1A pe uheloc'h (a-steud)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (a-steud)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (a-steud)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (a-steud)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Logodenn rummel (a-steud)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Kenglotus Microsoft (a-steud)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Logodenn rummel 3 nozelenn (a-steud)"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "marc'hañ NFS sac'het"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Rinegouriezh"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Ha mennout a rit kefluniañ ur rouedad lec'hel evit ho reizhiad ?"
-
-#~ msgid "Show less"
-#~ msgstr "Diskouez nebeutoc'h"
-
-#~ msgid "Show more"
-#~ msgstr "Diskouez muioc'h"
-
-#~ msgid "tie"
-#~ msgstr "frondenn"
-
-#~ msgid "brunette"
-#~ msgstr "duardez"
-
-#~ msgid "girl"
-#~ msgstr "plac'h"
-
-#~ msgid "woman-blond"
-#~ msgstr "meleganez"
-
-#~ msgid "automagic"
-#~ msgstr "emhud"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Petra eo reizhadur ho stokellaoueg ?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Klask kavout kartennoù PCMCIA ?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Klask kavout trobarzhelloù %s ?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "Ha mennout a rit kefluniañ ur gevreadenn gervel dre modem evit ho "
-#~ "reizhiad ?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Klask kavout trobarzhelloù PCI ?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "O klask ar parzhadur gwrizienn."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s : N'eo ket ur parzhadur gwrizienn, diuzit un all mar plij."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr ""
-#~ "Dibabit ur parzhadur d'ober anezhañ ho parzhadur gwrizienn, mar plij."
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "N'hoc'h eus ket a-walc'h a egor evit Lnx4win !"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U Mo"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# '¤'    is the 'ñ' (ntilde) in cp437 encoding.
-# '\227' is the 'ù' (ugrave) in cp437 encoding. 
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Degemer mat e LILO, an dibaber reizhiad oberia¤ !\n"
-#~ "\n"
-#~ "Evit rolla¤ an dibabo— aotreet, stokit <TAB>.\n"
-#~ "\n"
-#~ "Evit karga¤ unan anezho, skrivit e anv ha stokit <ENKAS> pe c'hortozit %d "
-#~ "eilenn evit al loc'ha¤ dre ziouer.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Degemer mat e SILO, an dibaber reizhiad oberian~ !\n"
-#~ "\n"
-#~ "Evit rollan~ an dibabou aotreet, stokit <TAB>.\n"
-#~ "\n"
-#~ "Evit kargan~ unan anezho, skrivit e anv ha stokit <ENKAS> pe c'hortozit %"
-#~ "d eilenn evit al loc'han~ dre ziouer.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Dibarzhoù pennañ SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Setu da heul enmontoù a vez e SILO.\n"
-#~ "Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#~ msgid "This label is already in use"
-#~ msgstr "War implij eo ar skridennad-se endeo"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Staliadur SILO zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX a glasko da gentañ kavout unan pe vuioc'h a azasaer SCSI PCI.\n"
-#~ "Ma gav anezhañ (pe anezho) ha ma oar pe sturier(ien) implijout, e (o)\n"
-#~ "enlakaat a raio ent emgefreek.\n"
-#~ "\n"
-#~ "\n"
-#~ "M'eo ho azasaer SCSI ur gartenn ISA, pe m'eo ur gartenn PCI hogen\n"
-#~ "ne oar ket DrakX pe sturier implijout evit ar gartenn-se, pe n'hoc'h eus\n"
-#~ "tamm azasaer SCSI ebet, goulennet e vo diganeoc'h neuze hag-eñ hoc'h\n"
-#~ "eus unan pe get. Ma n'hoc'h eus hini, eilgeriit \"Ket\". M'hoc'h eus\n"
-#~ "unan pe vuioc'h, eilgeriit \"Ya\". Ur roll sturierien a zeuio neuze\n"
-#~ "war wel, a vo ret deoc'h diuz unan anezho.\n"
-#~ "\n"
-#~ "\n"
-#~ "Goude m'ho po diuzet ar sturier, DrakX a c'houlenno ma vennit spisaat\n"
-#~ "dibarzhoù evitañ. Da gentañ, klaskit leuskel ar sturier amprouiñ\n"
-#~ "ar periant : peurliesañ e da mat en-dro.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ma ne ra ket, na zisoñjit ket an titouroù war ho periant a c'hellit\n"
-#~ "kavout en ho teuliadur pe digant Windows (m'hoc'h eus hemañ war ho\n"
-#~ "reizhiad), evel m'eo aliet gant ar sturlevr staliañ. An dibarzhoù a\n"
-#~ "vo ret deoc'h pourvezañ d'ar sturier eo a zo e kaoz."
-
-#~ msgid "Shutting down"
-#~ msgstr "O tizenaouiñ"
-
-#~ msgid "useless"
-#~ msgstr "diezhomm"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Dibabit \"Staliañ\" ma n'eus ket a stumm kent Linux bet staliaet,\n"
-#~ "pe ma vennit implijout meur a stumm pe a zasparzhadenn.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dibabit \"Bremanaat\" ma vennit hizivaat ur stumm kent Mandrake Linux :\n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "pe 7.0 (Air)."
-
-#~ msgid "Creating and formatting loopback file %s"
-#~ msgstr "O krouiñ hag o furmadiñ ar restr saveteiñ %s"
-
-#~ msgid "Amusements/Games"
-#~ msgstr "Dudi/C'hoarioù"
-
-#~ msgid "Applications/Archiving"
-#~ msgstr "Arloadoù/Diellerezh"
-
-#~ msgid "Applications/CPAN"
-#~ msgstr "Arloadoù/CPAN"
-
-#~ msgid "Applications/Configuration"
-#~ msgstr "Arloadoù/Kefluniañ"
-
-#~ msgid "Applications/Engineering"
-#~ msgstr "Arloadoù/Kalvezerezh"
-
-#~ msgid "Applications/File"
-#~ msgstr "Arloadoù/Restr"
-
-#~ msgid "Applications/Finance"
-#~ msgstr "Arloadoù/Arc'hanterezh"
-
-#~ msgid "Applications/Internet"
-#~ msgstr "Arloadoù/Kenrouedad"
-
-#~ msgid "Applications/Multimedia"
-#~ msgstr "Arloadoù/Liesvedia"
-
-#~ msgid "Applications/Networking"
-#~ msgstr "Arloadoù/Rouedad"
-
-#~ msgid "Applications/Productivity"
-#~ msgstr "Arloadoù/Ampletusted"
-
-#~ msgid "Applications/Publishing/TeX"
-#~ msgstr "Arloadoù/Embann/TeX"
-
-#~ msgid "Applications/Text"
-#~ msgstr "Arloadoù/Skrid"
-
-#~ msgid "Development/Debuggers"
-#~ msgstr "Diorren/Dizraenerien"
-
-#~ msgid "Development/Languages"
-#~ msgstr "Diorren/Aregoù"
-
-#~ msgid "Development/System"
-#~ msgstr "Diorren/Reizhiad"
-
-#~ msgid "Development/Tools"
-#~ msgstr "Diorren/Binvioù"
-
-#~ msgid "Extensions/Arabic"
-#~ msgstr "Astennoù/Arabeg"
-
-#~ msgid "Extensions/Chinese"
-#~ msgstr "Astennoù/Sineg"
-
-#~ msgid "Extensions/Japanese"
-#~ msgstr "Astennoù/Japaneg"
-
-#~ msgid "Libraries"
-#~ msgstr "Mezarc'hioù"
-
-#~ msgid "Networking/Utilities"
-#~ msgstr "Rouedad/Mavegoù"
-
-#~ msgid "System Environment/Base"
-#~ msgstr "Endro reizhiad/Diazez"
-
-#~ msgid "System Environment/Daemons"
-#~ msgstr "Endro reizhiad/Diaouled"
-
-#~ msgid "User Interface/Desktops"
-#~ msgstr "Etrefas arveriad/Gorretaol"
-
-#~ msgid "User Interface/X Hardware Support"
-#~ msgstr "Etrefas arveriad/Merañ ardivinkaj X"
-
-#~ msgid "Utilities/Archiving"
-#~ msgstr "Mavegoù/Diellerezh"
-
-#~ msgid "Utilities/System"
-#~ msgstr "Mavegoù/Reizhiad"
-
-#~ msgid "X11/Amusements"
-#~ msgstr "X11/Dudi"
-
-#~ msgid "X11/Applications"
-#~ msgstr "X11/Arloadoù"
-
-#~ msgid "X11/Applications/Internet"
-#~ msgstr "X11/Arloadoù/Kenrouedad"
-
-#~ msgid "X11/Applications/Networking"
-#~ msgstr "X11/Arloadoù/Rouedad"
-
-#~ msgid "X11/Window Managers"
-#~ msgstr "X11/Merourien prenester"
-
-#~ msgid "Communications"
-#~ msgstr "Kehentiñ"
-
-#~ msgid "Development/C++"
-#~ msgstr "Diorren/C++"
-
-#~ msgid "Development/Databases"
-#~ msgstr "Diorren/Stlennvonioù"
-
-#~ msgid "Development/Kernel"
-#~ msgstr "Diorren/Kraoñell"
-
-#~ msgid "Editors"
-#~ msgstr "Aozerien"
-
-#~ msgid "Emulators"
-#~ msgstr "Kendarvanerezh"
-
-#~ msgid "Graphics"
-#~ msgstr "Grafek"
-
-#~ msgid "Publishing"
-#~ msgstr "Embann"
-
-#~ msgid "Shells"
-#~ msgstr "Shelloù"
-
-#~ msgid "Sound"
-#~ msgstr "Son"
-
-#~ msgid "System/Fonts/True type"
-#~ msgstr "Reizhiad/Nodrezhoù/True Type"
-
-#~ msgid "System/Libraries"
-#~ msgstr "Reizhiad/Mezarc'hioù"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
deleted file mode 100644
index c406f3c6f..000000000
--- a/perl-install/share/po/bs.po
+++ /dev/null
@@ -1,12336 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Vedran Ljubovic <vljubovic@smartnet.ba>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-28 20:49GMT\n"
-"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
-"Language-Team: Bosnian <prijevodi@lugbih.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfiguriši sve glave odvojeno"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguriši samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vaš sistem podržava konfiguraciju više glava.\n"
-"Šta želite u�initi?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafi�ka karta"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izaberite grafi�ku kartu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Izaberite X drajver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X drajver"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree želite imati?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje ali samo sa\n"
-"XFree %s. Vašu karticu podržava XFree %s koji može imati bolju podršku za 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskim ubrzanjem"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR.\n"
-"Vašu karticu podržava XFree %s koji može imati bolju podršku za 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Izaberite veli�inu memorije vaše grafi�ke karte"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Izaberite opcije za server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kriti�na parametra su brzina vertikalnog osvježenja, što je brzina\n"
-"kojom se cijeli ekran osvježava, i najvažnije brzina horizontalne\n"
-"sinhronizacije, Å¡to je brzina kojm se prikazuju skan-linije.\n"
-"\n"
-"VEOMA JE VAŽNO da ne navedete tip monitora �iji je sinhronizacioni\n"
-"raspon izvan mogućnosti vašeg monitora: time možete oštetiti monitor.\n"
-" Ako niste sigurni, izaberite najmanju opciju."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Brzina horizontalnog osvježavanja"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Brzina vertiaklnog osvježavanja"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor nije konfigurisan"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafi�ka karta još uvijek nije konfigurisana"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolucije još nisu odabrane"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Želite li testirati konfiguraciju?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje ove grafi�ke karte može zalediti ra�unar"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probajte izmjeniti neke parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Došlo je do greške"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Napuštam za %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravna vrijednost?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Došlo je do greške, probajte izmjeniti neke parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i dubinu boja"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafi�ka karta: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Još"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Prikaži sve"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tastature: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Uređaj miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafi�ka karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafi�ke karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafi�ka memorija: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pripremam X-Window konfiguraciju"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Šta želite u�initi?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Izmjena Monitora"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Izmjena Grafi�ke kartice"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Izmjena Server opcija"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Izmjena Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Prikaži informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testiraj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Izlaz"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zadržati izmjene?\n"
-"Trenutna konfiguracija je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X u startanju"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mogu podesiti vaš ra�unar da automatski pokrene X nakon boota.\n"
-"Želite li da se X pokrene kada bootate?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molimo izvršite logout i zatim koristitite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljada boja (15 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ili više"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardna VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Kompatibilna, 1024x768 na 87 Hz sa preplitanjem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji može postići 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji može postići 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje želite smjestiti bootloader?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafi�kim menijem"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Bootanje iz DOS/Windowsa (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne opcije bootloadera"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader koji ćete koristiti"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot uređaj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOSima)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "ÄŒekanje prije bootanja default preslike"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Å ifra"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Å ifra (ponovo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ograni�i opcije komandne linije"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ograni�i"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "ÄŒisti /tmp prilikom svakog boota"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veli�ina RAMa ako je potrebno (pronađeno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omogući više profila"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Navedite veli�inu rama u MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcija ``Ograni�i opcije komandne linije'' je beskorisna bez šifre"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Molimo pokušajte ponovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Å ifre se ne poklapaju"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init Poruka"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Otvori �ekanje firmware-a"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Omogući boot sa CDa?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Omogući boot sa OFa?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Navedene su razne stavke.\n"
-"Možete dodati nove ili promjeniti postojeće."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gotovo"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Izmjeni"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu stavke želite dodati?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OSi (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OSi (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ostali OSi (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Preslika"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Čitaj-piši"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Labela"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-veli�ina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ukloni stavku"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna labela nije dozvoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Morate navesti image kernela"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Morate navesti root particiju"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ova labela je već u upotrebi"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronađeno %s %s interfejsa"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Imate li neki drugi?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li ijedan %s interfejs?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Pogledaj hardware info"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver ću pokušati?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slu�ajevima, %s drajver treba imati dodatne informacije za\n"
-"ispravan rad, iako on obi�no radi dobro i bez njih. Želite li navesti neke\n"
-"ekstra opcije za njega ili dozvoliti drajveru da ispita vaš ra�unar za sve\n"
-"informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti ra�unar,\n"
-"ali ne bi trebalo izazvati nikakvu Å¡tetu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Ispitivanje"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Navedi opcije"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sada možete navesti opcije za modul %s.\n"
-"Obratite pažnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada možete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
-"ime2=vrijednost2 ...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcije modula"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"U�itavanje modula %s nije uspjelo.\n"
-"Želite li probati opet sa drugim parametrima?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pristup administrativnim datotekama"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(već dodan %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ova šifra je previše jednostavna"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Molimo navedite korisni�ko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisni�ko ime smije sadržati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ovo korisni�ko ime je već dodano"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Korisni�ko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mogu podesiti vaš ra�unar da automatski prijavi jednog korisnika.\n"
-"Želite li koristiti ovu mogućnost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izaberite default korisnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window manager koji će se pokretati:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Molimo izaberite jezik koji ćete koristiti."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Možete izabrati i druge jezike koji će biti dostupni nakon instalacije"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Svi"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Ru�no izaberi"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Bez dijeljenja"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba biti instaliran. Da li ga želite instalirati?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Možete eksportovati koristeći NFS ili Sambu. Koji želite"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nedostaje obavezan paket %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Odustani"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Dijeljenje po-korisniku koristi grupu \"fileshare\". \n"
-"Možete dodavati korisnike u ovu grupu pomoću userdrake-a."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dobrodošli u Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Loš"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Visok"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Viši"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoi�an"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ovaj nivo treba koristiti pažljivo. On �ini vaš sistem lakšim za upotrebu,\n"
-"ali vrlo osjetljivim: ne smije biti korišten za ra�unar koji je spojen na\n"
-"druge ili na Internet. Nema pristupa Å¡ifrom."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Šifra je sada aktivirana, ali korištenje za mrežni ra�unar još nije "
-"preporu�eno."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardna sigurnost koja je preporu�ena za ra�unar koji će biti "
-"korišten za spajanje na Internet kao klijent."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Već postoje određena ograni�enja, a više automatskih provjera se pokreće "
-"svaku noć."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao "
-"server.\n"
-"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
-"prima\n"
-"konekcije sa mnogo klijenata. Napomena: ako je vaš ra�unar samo klijent na "
-"Internetu, možda je bolje da izaberete niži nivo."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n"
-"Sigurnosne osobine na maksimumu."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izaberite nivo sigurnosti"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Nivo sigurnosti"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobro došli u %s izbornik operativnog sistema!\n"
-"\n"
-"Izaberite operativni sistem na listi gore ili\n"
-"sa�ekajte %d sekundi do default boota.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro došli u GRUB izbornik operativnog sistema!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristite tipke %c i %c za izbor jedne od stavki."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi prije bootanja, ili 'c' za komandnu liniju."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljene stavke će biti bootane automatski za %d sekundi."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nema dovoljno prostora u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne možete instalirati bootloader na %s particiju\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoć još nije implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila boota"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>I"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Aurora-u prilikom boota"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao boot manager.\n"
-"Kliknite na Konfiguriši kako bi se pokrenuo �arobnjak za podešavanje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguriši"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistem mod"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sistem na startu"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ne želim da se autologiram"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, želim da se autologiram sa ovim (korisnik, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za �itanje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti screenshot prije particioniranja"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshotovi će biti dostupni nakon što instalirate u %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francuska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kostarika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgija"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Češka"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Njema�ka"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gr�ka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norveška"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Å vedska"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozemska"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italija"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "SAD"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Molimo najprije napravite backup vaših podataka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Pro�itajte pažljivo!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ako planirate koristiti aboot, budite pažljivi i ostavite slobodnog prostora "
-"(2048 sektora je dovoljno)\n"
-"na po�etku diska"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Greška"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "ÄŒarobnjak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izaberi akciju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Imate jednu veliku FAT particiju\n"
-"(koju najvjerovatnije koristi MicroSoft Dos/Windows).\n"
-"Predlažem da najprije promjenite veli�inu te particije\n"
-"(kliknite na nju, zatim na \"Promjeni veli�inu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Molimo kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ostalo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipovi file sistema:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Kreiraj"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Koristite ``%s'' umjesto toga"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Obriši"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najprije koristite ``Demontiraj''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene tipa particije %s, svi podaci na ovoj particiji će biti "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izaberi particiju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izaberi drugu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Prebaci u ekspertni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Poništi"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Svejedno nastavljate?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Izlaz bez spašavanja"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Izlazite bez pisanja tabele particija?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Želite li spasiti izmjene /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto alokacija"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Obriši sve"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su u upotrebi"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati više particija"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Da biste imali još particija, molimo pobrišite jednu kako bi se mogla "
-"kreirati extended particija"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Snimi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Vrati tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ponovo u�itaj tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje izmjenjivog medija"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izaberite datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup tabela particija nema istu veli�inu\n"
-"Ipak nastavljate?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ubacite disketu u jedinicu\n"
-"Svi podaci na toj disketi će biti izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pokušavam da spasim tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ta�ka montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Promjeni veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premještanje"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAIDa"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVMa"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificiraj RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Napravi novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Po�etni sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Veli�ina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tip datote�nog sistema: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ta�ka montiranja: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preference: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Izmjena tipa particije"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Koji datote�ni sistem želite?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Prebacujem sa ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdje želite montirati loopback datoteku %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje želite montirati uređaj %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu izmjeniti ta�ku montiranja jer se ova particija koristi za "
-"loopback.\n"
-"Najprije uklonite loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Izra�unavam granice FAT filesistema"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mijenjam veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ovoj particiji ne možete mijenjati veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Svi podaci na toj particiji bi trebali biti backupovani"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene veli�ine particije %s, svi podaci na njoj će biti izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Izaberite novu veli�inu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nova veli�ina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk je želite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji sektor je želite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Premještam"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Premještam particiju..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeći RAID na koji ćete dodati"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeći LVM na koji ćete dodati"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Naziv LVMa?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne može koristiti za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Naziv loopback datoteke: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dajte naziv datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Datoteku već koristi drugi loopback, izaberite drugo ime"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka već postoji. Želite li je koristiti?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Razni"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "uređaj"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivo"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "veli�ina chunka"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Žalim, ali ipak neću prihvatiti kreiranje /boot particije ovdje (na cilindru "
-">1024).\n"
-"Ili ćete koristiti LILO i stvar neće raditi, ili nećete koristiti LILO pa "
-"vam ne treba ni /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particija koju ste izabrali da dodate kao root (/) je fizi�ki locirana "
-"iznad\n"
-"1024og cilindra hard diska, tako da nemate /boot particiju.\n"
-"Ako planirate koristiti LILO boot manager, pazite da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
-"Pazite da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za uređaj %s će biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s, svi podaci na toj particiji će biti "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiram"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sakrij datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Prebaci datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s već sadrži neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Premještam datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je od sada poznata kao %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Uređaj: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS slovo uređaja: %s (pretpostavka)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Po�etak: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Veli�ina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nije formatirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Particija koja se boota po defaultu\n"
-"    (za MS-DOS boot, ne za lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Veli�ina chunka %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Naziv loopback datoteke: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Postoji mogućnost da je ova\n"
-"particija Driver particija, vjerovatno\n"
-"biste je trebali ostaviti na miru.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova posebna Bootstrap\n"
-"particija je za\n"
-"dvojni boot vašeg sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veli�ina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na busu %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Klju� za kodiranje datote�nog sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite vaš klju� za kodiranje datote�nog sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Å ifre se ne poklapaju"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Å ifra"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Šifra (još jednom)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Promjeni tip"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Molimo kliknite na medij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Traži servere"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ne znam kako formatirati %s tipa %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktoriju %s nije uspjelo"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck nije uspio, izlazni kod %d ili signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "greška u demontiranju %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "sa /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne možete koristiti JFS za particije manje od 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ta�ke montiranja moraju po�injati sa /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Već postoji particija sa ta�kom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne možete koristiti LVM logi�ki volumen za ta�ku montiranja %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Potreban vam je pravi file sistem (ext2, reiserfs) za ovu ta�ku montiranja\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ne možete koristiti kriptovani datote�ni sistem za ta�ku montiranja %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno prostora za auto-alokaciju"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nemam Å¡ta da radim"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Greška u otvaranju %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu "
-"kreirati novi file sistemi. Molimo provjerite vaš hardware i pronađite uzrok "
-"greške"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemate nijednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalacija se prostire na nekoliko CDova. DrakX zna da li "
-"je\n"
-"neki paket smješten na drugom CDu i on će izbaciti trenutni CD i zamoliti "
-"vas\n"
-"da ubacite neki drugi po potrebi."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\" Installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wishto connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada možete izabrati koje servise želite pokretati prilikom boota.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
-"instalaciji. Pregledajte ih pažljivo i isklju�ite sve one koji nisu "
-"potrebni\n"
-"prilikom boota.\n"
-"\n"
-"Kada izaberete servis dobićete kratki tekst koji objašnjava taj servis\n"
-"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
-"mijenjate predloženi izbor.\n"
-"\n"
-"!! Budite vrlo pažljivi sa ovim korakom ako namjeravate koristiti vaš "
-"ra�unar\n"
-"kao server: vjerovatno ne želite da pokrenete neke servise koji vam ne\n"
-"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n"
-"ako su aktivni na serveru. Općenito, izaberite samo one servise koji vam\n"
-"stvarno trebaju. !!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working internet connection for this feature to function. It\n"
-"will actually install on your machine a time server that can be optionally\n"
-"used by other machines on your local network."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Na ovom mjestu trebate izabrati gdje želite instalirati Linux Mandrake\n"
-"operativni sistem na vašem hard disku. Ako je disk prazan ili ako postojeći\n"
-"operativni sistem koristi sav prostor na njemu, potrebno je da ga\n"
-"particionirate. U biti, particioniranje hard diska predstavlja logi�ko\n"
-"organiziranje kako bi se stvorio prostor za instaliranje vašeg novog\n"
-"Mandrake Linux sistema.\n"
-"\n"
-"Pošto su efekti particioniranja obi�no nepovratni, particioniranje može\n"
-"biti zastrašujuće i stresno ako ste neiskusan korisnik. Srećom, postoji\n"
-"�arobnjak koji pojednostavljuje taj proces. Prije zapo�injanja, molimo\n"
-"konsultirajte priru�nik i nemojte žuriti.\n"
-"\n"
-"Ako instalirate koristeći Ekspertni mod, ući ćete u DiskDrake, Mandrake\n"
-"Linux alat za particioniranje, koji vam omogućava da fino podesite vaše\n"
-"particije. Pogledajte priru�nik, poglavlje o DiskDrake-u. Na instalacionom\n"
-"su�elju možete koristiti �arobnjake kao što je opisano tamo, klikajući na\n"
-"dugme ÄŒarobnjak.\n"
-"\n"
-"Ako su particije već definirane (tokom neke ranije instalacije ili pomoću\n"
-"nekog drugog alata za particioniranje), sve Å¡to trebate jeste da ih "
-"izaberete\n"
-"za instalaciju vašeg Linux sistema.\n"
-"\n"
-"Ako particije nisu već definirane, trebate ih kreirati koristeći �arobnjak.\n"
-"Ovisno o konfiguraciji vašeg hard diska, može biti dostupno nekoliko\n"
-"mogućnosti:\n"
-"\n"
-" * Koristi slobodan prostor: jednostavno vodi na automatsko particioniranje\n"
-"vašeg praznog diska (diskova). Neće biti postavljana nikakva daljnja "
-"pitanja.\n"
-"\n"
-" * Koristi postojeću particiju: �arobnjak je detektovao jednu ili više "
-"postojećih\n"
-"Linux particija na vašem hard disku. Ako ih želite zadržati, izaberite ovu\n"
-"opciju.\n"
-"\n"
-" * Koristi slobodan prostor na Windows particiji: ako je na vašem hard\n"
-"disku instaliran Microsoft Windows koji je zauzeo sav slobodan prostor,\n"
-"moraćete napraviti nešto slobodnog prostora za Linux. To možete u�initi\n"
-"brišući vašu Microsoft Windows particiju zajedno sa podacima (vidi opcije\n"
-"\"Pobriši �itav disk\" ili \"Ekspertni mod\") ili možete promjeniti veli�inu "
-"vaše\n"
-"Microsoft Windows particije. Promjena veli�ine se može izvršiti bez gubitka\n"
-"podataka. Ova mogućnost je preporu�ena ako namjeravate koristiti i Linux\n"
-"Mandrake i Microsoft Windows na istom ra�unaru.\n"
-"\n"
-"    Prije izbora ove opcije, molimo da imate na umu da će veli�ina vaše\n"
-"Microsoft Windows particije biti manja nego trenutno. To zna�i da će "
-"Microsoft\n"
-"Windows prijavljivati da imate manje prostora za smještaj podataka ili "
-"instaliranje\n"
-"novog softwarea.\n"
-"\n"
-" * Pobriši �itav disk: ako želite da obrišete sve podatke i sve particije\n"
-"koje su prisutne na vašem hard disku i umjesto njih postavite vaš novi "
-"Linux\n"
-"Mandrake sistem, možete izabrati ovu opciju. Budite oprezni sa ovom\n"
-"mogućnošću, jer nećete moći poništiti vaš izbor nakon potvrde.\n"
-"\n"
-"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * Ukloni Windows: ovo će jednostavno pobrisati sve na disku i po�eti od\n"
-"po�etka, particionirajući ga. Svi podatci na vašem disku će biti "
-"izgubljeni.\n"
-"\n"
-"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * Ekspertni mod: ako želite da ru�no particionirate vaš hard disk, "
-"izaberite ovu\n"
-"opciju. Budite oprezni - to je moćan, ali i opasan izbor. Vrlo lako možete\n"
-"izgubiti sve vaše podatke. Zato nemojte birati ovu opciju sem ako ste "
-"sigurni\n"
-"Å¡ta radite."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-"    * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n"
-"mogle koristiti (formatiranje zna�i kreiranje datote�nog sistema). \n"
-"\n"
-"U ovom trenutku možda ćete poželjeti da reformatirate neke već postojeće\n"
-"particije kako biste pobrisali podatke koje sadrže. Ako želite to u�initi, "
-"molim\n"
-"takođe izaberite te particije koje želite da formatirate.\n"
-"\n"
-"Molim obratite pažnju da nije neophodno formatirati sve postojeće "
-"particije.\n"
-"Morate reformatirati particije koje sadrže operativni sistem (kao što su\n"
-"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje "
-"sadrže\n"
-"podatke koje želite zadržati (tipi�no /home).\n"
-"\n"
-"Molimo da pažljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
-"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n"
-"povratite.\n"
-"\n"
-"Kliknite na OK kada budete spremni za formatiranje particija.\n"
-"\n"
-"Kliknite na Odustani ako želite da izaberete druge particije za instalaciju\n"
-"vašeg novog Linux-Mandrake operativnog sistema.\n"
-"\n"
-"Kliknite na Napredno da izaberete particije koje želite provjeriti radi\n"
-"loših blokova."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Vaš novi Linux-Mandrake operativni sistem se trenutno intalira. Ovisno o\n"
-"broju paketa koje želite instalirati i brzini vašeg ra�unara, ova operacija\n"
-"bi mogla trajati nekoliko minuta ali i zna�ajno duže.\n"
-"\n"
-"Molim da imate strpljenja."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bug-fixes may\n"
-"have been fixed, and security issues solved. To allow you to benefit from\n"
-"this updates you are now proposed to download them from the internet.\n"
-"Choose \"Yes\" if you have a working internet connection, or \"No\" if you\n"
-"prefer to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearer to you. Then a packages selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package or \"Cancel\" to abort."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Prije nego što nastavimo, trebate pažljivo pro�itati uvjete licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju, pa ako se ne slažete sa svim\n"
-"uvjetima u njoj, kliknite na dugme Odbij, što će automatski završiti "
-"instalaciju.\n"
-"Da biste nastavili sa instalacijom, kliknite na dugme Prihvati."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step.\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk.\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and load your "
-"initial\n"
-"partitions table.\n"
-"\n"
-"    * \"removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(Type, options, format) and gives more information.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the chapter ext2fs from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want to resize in order to install your\n"
-"new Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Molimo da imate strpljenja. Ova operacija može potrajati nekoliko minuta."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX sada mora znati da li želite obaviti podrazumjevanu instalaciju\n"
-"(\"Preporu�eno\") ili želite da imate veću kontrolu (\"Ekspert\"). Takođe\n"
-"imate izbor između instalacije novog ili unaprijeđenja postojećeg\n"
-"Mandrake Linux sistema. \n"
-"\n"
-" * \"Instaliraj\" Potpuno briše raniji sistem. U stvari, ovisno o tome\n"
-"šta trenutno sadrži vaš ra�unar, možda ćete moći zadržati neke stare\n"
-"particije (Linux i druge) bez ikakvih izmjena.\n"
-"\n"
-" * \"Unaprijedi\" Ova klasa instalacije vam omogućuje da jednostavno\n"
-"unaprijedite pakete trenutno instalirane na vašem Mandrake Linux sistemu.\n"
-"Ona zadržava trenutne particije vaših hard diskova kao i postavke "
-"korisnika.\n"
-"Svi drugi koraci instalacije ostaju dostupni kao i u obi�noj instalaciji.\n"
-"\n"
-" * \"Unaprijedi samo pakete\" Ova potpuno nova klasa vam omogućuje da\n"
-"unaprijedite postojeći Mandrake Linux sistem pri �emu ćete sa�uvati svu\n"
-"sistemsku konfiguraciju bez izmjena. Dodavanje novih paketa trenutnoj\n"
-"instalaciji je također moguće.\n"
-"\n"
-"Unaprijeđenja bi trebala raditi fino za Mandrake Linux sisteme po�evši\n"
-"od verzije \"8.1\".\n"
-"\n"
-"Ovisno o vašem poznavnaju GNU/Linuxa, molim izaberite jedan od sljedećih\n"
-"na�ina za instalaciju ili update vašeg Mandrake Linux operativnog sistema:\n"
-"\n"
-" * Preporu�eno: ako nikada niste instalirali GNU/Linux operativni sistem,\n"
-"izaberite ovo. Instalacija će biti veoma jednostavna i biće vam postavljeno\n"
-"svega par pitanja.\n"
-"\n"
-" * Ekspert: ako imate dobro znanje GNU/Linuxa, možete odabrati ovu klasu\n"
-"instalacije. Ekspertna instalacija vam omogućuje da obavite visoko "
-"prilagođenu\n"
-"instalaciju. Odgovor na neka pitanja može biti vrlo težak ako nemate dobro\n"
-"poznavanje GNU/Linuxa, zato nemojte birati ovo sem ako znate Å¡ta radite."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"[Return] to \"Cancel\" and choose again."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molimo izaberite ispravan port. Na primjer, \"COM1\" port pod MS\n"
-"Windowsom se zove \"ttyS0\" pod GNU/Linuxom."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if onlynfor "
-"one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO and grub are boot loaders for GNU/Linux. This stage, normally, is\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general boot-loader parameters, you are\n"
-"presented the list of boot options that will be available at boot time.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Select an entry and click \"Modify\" to modify or remove\n"
-"it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Morate navesti gdje želite smjestiti informacije koje su potrebne za\n"
-"bootanje GNU/Linuxa.\n"
-"\n"
-"Izaberite \"Prvi sektor na disku (MBR)\" sem ako znate ta�no šta radite."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control "
-"Centernand clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sada pronalazi sve IDE uređaje prisutne na vašem ra�unaru. Također\n"
-"će pretražiti sistem za jednu ili više PCI SCSI kartica. Ako SCSI kartica "
-"bude\n"
-"pronađena, DrakX će automatski instalirati odgovarajući drajver.\n"
-"\n"
-"Budući da pronalaženje hardware-a ponekad ne uspjeva pronaći neki dio\n"
-"hardware-a, DrakX će pitati za potvrdu da li imate SCSI karticu ili ne.\n"
-"Kliknite Da ako znate da postoji SCSI kartica instalirana na vašem "
-"ra�unaru.\n"
-"Biće vam predstavljena lista SCSI kartica koje možete izabrati. Kliknite Ne\n"
-"ako nemate nikakav SCSI hardware. Ako niste sigurni, možete pregledati "
-"listu\n"
-"hardware u vašem ra�unaru tako što ćete izabrati \"Vidi hardware info\" i "
-"kliknuti\n"
-"na OK. Pretražite listu hardware-a i zatim kliknite na dugme OK kako bi se\n"
-"vratili na pitanje o SCSI-ju.\n"
-"\n"
-"Ako morate ru�no odabrati adapter, DrakX će vas pitati da li želite navesti\n"
-"neke opcije za njega. Trebate dopustiti DrakXu da ispita hardware za\n"
-"neke opcije specifi�ne za tu karticu. Ovo obi�no radi dobro.\n"
-"\n"
-"Ako DrakX ne može ispitati opcije koje trebaju biti proslijeđene, moraćete\n"
-"ru�no navesti opcije za drajver. Molimo pogledajte Priru�nik za korištenje\n"
-"/User Guide/ (poglavlje 3, sekcija \"Prikupljanje informacija o vašem "
-"hardveru\")\n"
-"za napomene o pribavljanju ovih informacija iz hardverske dokumentacije,\n"
-"sa web stranice proizvođa�a (ako imate internet pristup) ili iz Microsoft\n"
-"Windowsa (ako ga imate na vašem sistemu)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk koji želite obrisati kako biste instalirali vašu novu "
-"Mandrake\n"
-"Linux particiju. Budite pažljivi, svi podaci koji se nalaze na njemu će "
-"biti\n"
-"izgubljeni i neće se moći vratiti!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate također formatirati i %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste sljedeći server (servere): %s\n"
-"\n"
-"\n"
-"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
-"sigurnosnih\n"
-"problema, ali možda će biti pronađeni neki novi. U tom slu�aju, morate ih\n"
-"unaprijediti što prije bude moguće.\n"
-"\n"
-"\n"
-"Da li zaista želite instalirati ove servere?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu disketu u jedinicu %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT (DOS/Windows) formatirana"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da koristite ovaj izbor spašenih paketa, bootajte instalaciju sa ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Greška u �itanju datoteke %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki dio hardware-a na vašem ra�unaru zahtjeva ``posjedovane'' drajvere za "
-"rad.\n"
-"Možete naći više podataka o njima na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Za ovo, kreirajte particiju (ili kliknite na neku od postojećih).\n"
-"Zatim izaberite ``Ta�ka montiranja'' i postavite ga na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemate nijednu swap particiju\n"
-"\n"
-"Svejedno nastavi?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Koristi postojeću particiju"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nema nijedne postojeće particije za upotrebu"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju želite koristiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izaberite veli�ine"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Veli�ina root particije u MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veli�ina swap particije u MB:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Koristi slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji želite promjeniti veli�inu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Izra�unavam granice Windows datote�nog sistema"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT resizer ne može izmjeniti vašu particiju, \n"
-"došlo je do sljedeće greške: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Vaša Windows particija je previše fragmentirana, molimo prvo pokrenite "
-"``defrag'' "
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX će sada promjeniti veli�inu vaše Windows particije. Budite pažljivi, "
-"ova\n"
-"operacija je opasna. Ako to već niste uradili, najprije napustite "
-"instalaciju,\n"
-"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n"
-"ponovo pokrenite instalaciju. Također biste trebali spasiti sve podatke.\n"
-"Kada ste sigurni, kliknite na Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koju veli�inu želite da sa�uvate za windows na"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particiji %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT promjena veli�ine nije uspjela: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za promjenu veli�ine ili upotrebu za "
-"loopback (ili nije ostalo dovoljno prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Pobriši �itav disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate više od jednog hard diska, na koji želite instalirati linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Ru�no particioniranje diska"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada možete particionirati %s.\n"
-"Kada završite, ne zaboravite spasiti sa `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na vašoj Windows particiji"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ne mogu naći dovoljno prostora za instalaciju"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Particioni �arobnjak je našao sljedeća rješenja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspjelo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Pokrećem mrežu"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Zaustavljam mrežu"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Došlo je do greške, ali ne znam kako da je riješim fino.\n"
-"Nastavite na vlastiti rizik."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvostruka ta�ka montiranja %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki bitni paketi nisu ispravno instalirani.\n"
-"Ili je neispravan vaš cdrom uređaj ili vaš cdrom medij.\n"
-"Provjerite cdrom na instaliranom ra�unaru koristeći \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro došli u %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nema pogodne disketne jedinice"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Prelazim na korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vaš sistem ima nizak nivo resursa. Možda imate neki problem sa instalacijom\n"
-"Mandrake Linuxa. Ako se ovo desi, možete pokušati tekstualnu instalaciju. Za "
-"ovo,\n"
-"pritisnite `F1' prilikom bootanja na CDROMu, zatim unesite `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Klasa instalacije"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Molimo izaberite jednu od sljedećih klasa instalacije:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna veli�ina grupa koje ste izabrali je otprilike %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ako želite da instalirate manje od ove veli�ine,\n"
-"izaberite procenat paketa koje želite instalirati.\n"
-"\n"
-"Nizak procenat će instalirati samo one najbitnije pakete;\n"
-"procenat 100%% će instalirati sve izabrane pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na disku imate mjesta samo za %d%% ovih paketa.\n"
-"\n"
-"Ako želite da instalirate manje od ovoga,\n"
-"izaberite procenat paketa koje želite da instalirate.\n"
-"Nizak procenat će instalirati samo one najbitnije pakete;\n"
-"procenat %d%% će instalirati najveći mogući broj paketa."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Na idućem koraku ćete biti u mogućnosti da ih izaberete nešto preciznije."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procenat paketa za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Izbor grupe paketa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Izbor pojedina�nih paketa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veli�ina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Neispravan paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veli�ina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Zna�aj: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne možete izabrati ovaj paket jer nema dovoljno prostora za njega"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Sljedeći paketi će biti instalirani"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Sljedeći paketi će biti uklonjeni"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ne možete izabrati/isklju�iti ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezan paket, ne može biti isklju�en"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne možete isklju�iti ovaj paket. On je već instaliran"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket mora biti unaprijeđen\n"
-"Jeste li sigurni da ga želite isklju�iti?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne možete isklju�iti ovaj paket. On mora biti unaprijeđen"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Automatski prikaži izabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalacija"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "U�itaj/Spasi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Osvježavam izbor paketa"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izaberite pakete koje želite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostalo vremena "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Molimo sa�ekajte, pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promjenite vaš CD-ROM!\n"
-"\n"
-"Molimo ubacite CD ozna�en sa \"%s\" u vaš CD-ROM uređaj i pritisnite Ok kad "
-"ste spremni.\n"
-"Ako ga nemate, pritisnite Odustani da biste izbjegli instaliranje sa ovog CD-"
-"ROMa."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Svejedno nastavi?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Došlo je do greške pri naru�ivanju paketa:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Došlo je do greške kod instaliranja paketa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Došlo je do greške"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Da li zaista želite napustiti instalaciju?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licencni ugovor"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaše tastature."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je puna lista svih dostupnih tastatura"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Koju klasu instalacije želite?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instaliraj/Unaprijedi"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili update?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Preporu�eno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Unaprijedi"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Unaprijedi samo pakete"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Molimo izaberite vrstu vašeg miša."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port miša"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Molimo izaberite na kojem serijskom portu je spojen vaš miš."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacija tipki"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 dugmeta"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 dugmeta"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Podešavam PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Podešavam IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Pretražujem particije da nađem ta�ke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Izaberite ta�ke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu pro�itati vašu tabelu particija, previše je oštećena za mene :(\n"
-"Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).\n"
-"Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.\n"
-"(greška je %s)\n"
-"\n"
-"Slažete li se sa gubitkom svih particija?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nije uspio ispravno pro�itati tabelu particija.\n"
-"Nastavljate na vlastiti rizik!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će "
-"nastaviti, ali da biste bootali vaš sistem, morate kreirati bootstrap "
-"particiju u DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nije pronađena nijedna root particija radi unaprjeđivanja"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root particija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Šta je root particija (/) vašeg sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje želite formatirati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Provjeri loše blokove?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatiram particije"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiram i formatiram datoteku %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Nemam dovoljno swap prostora da dovršim instalaciju, molimo dodajte još"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Tražim dostupne pakete"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Pronalazim pakete za unaprjeđenje"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Vaš sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Potpuna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporu�ena (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite u�itaj ili spasi izbor paketa na disketu.\n"
-"Format je isti kao i diskete koje generiše auto_install"
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Vrati sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Vraćam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadrži izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Spasi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veli�ina je veća od slobodnog prostora"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Vrsta instalacije"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste izabrali nijednu grupu paketa\n"
-"Molimo izaberite minimalnu instalaciju koju želite"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Sa X-om"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporu�eno)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve CDe na listi, kliknite na Ok.\n"
-"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
-"Ako nedostaju samo neki CDovi, isklju�ite ih, zatim kliknite na Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM pod oznakom \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Post-instalacijsko podešavanje"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molimo ubacite boot disketu koja je upotrebljena u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molimo ubacite disketu Update Modula u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sada imate mogućnost da dobavite sa interneta unaprijeđene pakete koji\n"
-"su izašli nakon što je distribucija objavljena.\n"
-"\n"
-"Dobićete sigurnosne ispravke ili ispravke bugova, ali prethodno je potrebno\n"
-"da podesite Internet konekciju.\n"
-"\n"
-"Da li želite instalirati unaprjeđenja ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontaktiram Mandrake Linux web stranicu da bih saznao listu dostupnih mirrora"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Koja je vaša vremenska zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardverski sat podešen na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (koristeći NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nema štampa�a"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Imate li ISA zvu�nu karticu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije kako biste podesili vašu zvu�nu "
-"karticu"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije otkrivena zvu�na kartica. Probajte \"harddrake\" poslije instalacije"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ukratko"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Miš"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Štampa�"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvu�na kartica"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartica"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Podesite root Å¡ifru"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez Å¡ifre"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentikacijski LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentifikacija NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domen"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prva disketna jedinica"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Druga disketna jedinica"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Presko�i"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(PAŽNJA! Vi koristite XFS za vašu root particiju,\n"
-"pravljenje boot diskete na 1.44 Mb disketi vjerovatno neće\n"
-"raditi, pošto XFS traži veoma velik drajver)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Žao mi je, nema dostupne disketne jedinice"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Izaberite disketnu jedinicu koju želite koristiti da napravite boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ubacite disketu u %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Pravim boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripremam bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Izgleda da imate OldWorld ili Unknown ra�unar,\n"
-" yaboot bootloader neće raditi kod vas.\n"
-"Instalacija će se nastaviti, ali ćete\n"
-" morati koristiti BootX za bootanje vašeg ra�unara"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Da li želite koristiti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Greška u instaliranju aboota, \n"
-"da li da pokušam nasilnu instalaciju �ak i ako to uništi prvu particiju?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaliram bootloadera"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Možda ćete trebati promjeniti vaš Open Firmware boot uređaj\n"
-" da biste aktivirali bootloader.  Ako ne vidite upit bootloadera\n"
-" prilikom bootanja, držite Command-Option-O-F prilikom boota\n"
-" i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Zatim kucajte: shut-down\n"
-"Prilikom idućeg boota biste trebali vidjeti upit bootloadera."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Neki koraci nisu dovršeni.\n"
-"\n"
-"Da li zaista želite izaći sada?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Čestitamo, instalacija je završena.\n"
-"Uklonite boot medij i pritisnite return za reboot.\n"
-"\n"
-"\n"
-"Za informacije o ispravkama koje su dostupne za ovu verziju Mandrake "
-"Linuxa,\n"
-"pogledajte Errata koja je dostupna na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacije o podešavanju vašeg sistema su dostupne u poglavlju\n"
-"\"nakon instalacije\" vašeg Zvani�nog Mandrake Linux priru�nika za upotrebu."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ova auto instalacija može biti potpuno automatizovana ako želite,\n"
-"u kojem slu�aju će preuzeti hard disk!!\n"
-"(ovo je namjenjeno za instaliranje na drugi ra�unar).\n"
-"\n"
-"Možda ćete željeti radije ponoviti instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizovano"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ponovi"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Spasi izbor paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> između elemenata  | <Space> vrši izbor | <F12> idući ekran "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "nedostaje consolehelper"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Izaberi datoteku"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Osnovno"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Molimo sa�ekajte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Proširi stablo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Smanji stablo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Prekida� između ravnog i grupnog sortiranja"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Pogrešan izbor, pokušajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vaš izbor? (podrazumjevano %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Stavke koje morate popuniti:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Vaš izbor? (0/1, podrazumjevano %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Dugme '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Da li želite kliknuti na ovo dugme?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Vaš izbor? (podrazumjevano '%s' %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari od kojih možete izabrati (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molimo unesite prvi broj od deset koji želite izmjeniti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"Vaš izbor?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Primjetite, label je promjenjena:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ponovo pošalji"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Češka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Njema�ka"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Å panska"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finska"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francuska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveška"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poljska"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruska"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Å vedska"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK tastatura"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US tastatura"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaća mašina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejdžanska (latinica)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgijska"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bugarska (fonetska)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Švicarska (Njema�ki izgled)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Å vicarska (Francuski izgled)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Češka (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Njema�ka (bez mrtvih tipki)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveška)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Å vedska)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonska"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska (\"Ruski\" izgled)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska (\"Latini�ni\" izgled)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Gr�ka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Mađarska"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Hrvatska"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelska"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (Fonetska)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranska"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandska"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italijanska"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanska 106 tipki"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino-Ameri�ka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanska AZERTY (stara)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanska AYERTY (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanska \"red brojeva\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanska \"fonetska\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvijska"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandska"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalska"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Kvebek)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunska (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunska (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovena�ka"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slova�ka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slova�ka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (ćirilica)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilska"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tajlandska tastatura"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadži�ka tastatura"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderni \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinska"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US tastatura (međunarodna)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamska \"red brojeva\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latini�no)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Desna Alt tipka"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Obje Shift tipke istovremeno"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control i Shift tipka istovremeno"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock tipka"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl i Alt tipke istovremeno"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt i Shift tipke istovremeno"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Meni\" tipka"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Lijeva \"Windows\" tipka"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Desna \"Windows\" tipka"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kružno montiranje %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Najprije ukloni logi�ke volumene\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podrška za 2.2 kernele više ne postoji. Molim koristite 2.4 kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Opšti PS2 Miš sa kota�em"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 dugme"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Opšti miš sa 2 dugmeta"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Opšti"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Kota�"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Opšti miš sa 3 dugmeta"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 dugmeta"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 dugmeta"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nijedan"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Bez miša"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Molimo testirajte miš"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Da biste aktivirali miša,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMJERITE VAŠ KOTAČ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sljedeći ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Prethodni"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Naj�ešći na�in za konekciju sa adsl-om je pppoe.\n"
-"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n"
-"Ako ne znate, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Koji dhcp klijent želite koristiti?\n"
-"Podrazumjevani je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije pronađen ethernet mrežni adapter na vašem sistemu.\n"
-"Ne mogu podesiti ovu vrstu konekcije."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Izaberite mrežni interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Molimo izaberite koji mrežni adapter želite koristiti za spajanje na Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nije pronađena mrežna kartica"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Podešavam mrežu"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molimo unesite naziv vašeg ra�unara ako ga znate.\n"
-"Neki DHCP serveri traže hostname kako bi radili.\n"
-"Naziv vašeg ra�unara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao Å¡to je ``mojcomp.mojlab.mojafirma.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Host name"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Čarobnjak za podešavanje mreže"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Koje je vrste vaša ISDN konekcija?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju želite?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. On sadrži moćne alate,\n"
-"  ali ga je teško podesiti i nije standardiziran.\n"
-"\n"
-"* Novu konfiguraciju je lakše razumjeti, standardnija je,\n"
-"  ali ima manje alata.\n"
-"\n"
-"Preporu�ujemo light konfiguraciju.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Podešavanje ISDNa"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite vašeg providera.\n"
-" Ako nije na listi, izaberite Nije na listi"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Evropski protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (iznajmljene linije)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol želite koristiti?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Koju vrstu kartice imate?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaše kartice.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Prekid"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Nastavak"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Koja je vaša ISDN kartica ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI "
-"karticu na idućem ekranu."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nije pronađena nijedna ISDN PCI kartica. Molimo izaberite jednu na idućem "
-"ekranu."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Molimo izaberite na koji serijski port je naka�en vaš modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcije dialupa"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Naziv konekcije"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Broj telefona"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skripta"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ime domena"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS server (opcionalno)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS server (opcionalno)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Možete se diskonektovati ili prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Možete prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste spojeni na Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Možete se spojiti na Internet ili prekonfigurisati vašu konekciju."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Trenutno niste konektovani na Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektuj me"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Prekini konekciju"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Podesi konekciju"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija & podešavanje"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada ćemo podesiti konekciju %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada ćemo podesiti konekciju %s.\n"
-"\n"
-"\n"
-"Pritisnite OK za nastavak."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Podešavanje mreže"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Pošto radite mrežnu instalaciju, vaša mreža je već podešena.\n"
-"Kliknite na Ok da zadržite tu konfiguraciju ili Odustani za podešavanje vaše "
-"Internet & Mrežne konekcije.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro došli u Čarobnjak za podešavanje mreže\n"
-"\n"
-"Sada ćemo podesiti vašu internet/mrežnu konekciju.\n"
-"Ako ne želite da koristite automatsko prepoznavanje, isklju�ite opciju.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za podešavanje"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Koristi auto prepoznavanje"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Prepoznajem uređaje..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detektovan na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektovan %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektovan na interfejsu %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "otkrivena kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN konekcija"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "prepoznata ethernet kartica(e)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite konekciju koju želite podesiti"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Podesili ste nekoliko na�ina za konekciju na Internet.\n"
-"Izaberite jedan od njih koji ćete koristiti.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet konekcija"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li želite pokrenuti konekciju prilikom boota?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Podešavanje mreže"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Potrebno je restartovati mrežu"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Došlo je do problema prilikom restartovanja mreže:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Čestitamo, podešavanje mreže i interneta je završeno.\n"
-"\n"
-"Sada će ova konfiguracija biti primjenjena na vaš sistem.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon što je to gotovo, preporu�ujemo da restartujete vaš X\n"
-"okoliš kako bi se izbjegao problem sa promjenom naziva ra�unara."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Došlo je do problema prilikom podešavanja.\n"
-"Provjerite vašu konekciju pomoću net_monitor ili mcc. Ako vaša konekcija ne "
-"radi, možete ponovo pokrenuti podešavanje"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj uređaj je prethodno podešen za konekciju na Internet.\n"
-"Samo prihvatite kako bi ovaj uređaj ostao podešen.\n"
-"Izmjena polja ispod će prepisati ovu konfiguraciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molimo unesite IP konfiguraciju za ovaj ra�unar.\n"
-"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
-"razdvojenoj ta�kama (npr. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Podešavam mrežni uređaj %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (drajver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatska IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti u formatu 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molimo unesite naziv vašeg ra�unara ako ga znate.\n"
-"Naziv vašeg ra�unara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao Å¡to je ``mojcomp.mojlab.mojafirma.com''.\n"
-"Možete također unijeti IP adresu gateway-a ako ga imate"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (tj. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway uređaj"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfiguracija proxija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Otkrij id mrežne karte (korisno za laptope)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba biti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet konfiguracija"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li se želite pokušati spojiti na Internet sada?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probavam vašu konekciju..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistem je sada spojen na Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, sada će biti odspojen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Izgleda da sistem nije spojen na Internet.\n"
-"Probajte promjeniti postavke vaše konekcije."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Podešavanje konekcije"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Molimo ispunite ili provjerite polje ispod"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Vaš li�ni broj telefona"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Naziv provajdera (npr. provajder.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcionalno)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcionalno)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Izaberite vašu državu"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Na�in biranja broja"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Brzina konekcije"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout konekcije (u sek.)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login naloga (korisni�ko ime)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Å ifra naloga"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particije nisu podržane na ovoj platformi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate rupu u vašoj tabeli particija li je ja ne mogu upotrijebiti.\n"
-"Jedino rješenje je da pomjerite vaše primarne particija kako bi rupa bila "
-"pored extended particija"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Povratak iz datoteke %s nije uspio: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Loša backup datoteka"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Greška u pisanju datoteke: %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Nešto loše se dešava na vašem disku. \n"
-"Test integriteta podataka nije uspio. \n"
-"To zna�i će da pisanje bilo �eka na disk rezultirati smećem"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "obavezno"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "važno"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "vrlo fino"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "fino"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "možda"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokalni štampa�"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Udaljeni štampa�"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Štampa� na udaljenom CUPS serveru"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Štampa� na udaljenom lpd serveru"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Mrežni štampa� (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Štampa� na SMB/Windows 95/98/NT serveru"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Štampa� na NetWare serveru"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Unesite URI uređaja štampa�a"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Spoji zadatak na komandu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nepoznat model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokalni štampa�i"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Udaljeni štampa�i"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na paralelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB štampa� \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", višenamjenski uređaj na paralelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", višenamjenski uređaj na USBu"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", višenamjenski uređaj na HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", višenamjenski uređaj"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", Å¡tampa u %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", štampa� \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na Windows serveru \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell serveru \"%s\", štampa� \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", koristeći komandu %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Sirovo Å¡tampanje (Bez drajvera)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na ovom ra�unaru)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS serveru \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izaberi konekciju štampa�a"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je štampa� povezan na ra�unar?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Ovdje ne morate podešavati štampa�e na udaljenim CUPS serverima;\n"
-"ovi štampa�i će biti automatski prepoznati."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Podešavanje CUPSa"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Navedite CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Da biste dobili pristup štampa�ima na udaljenim CUPS serverima u vašoj "
-"lokalnoj mreži, ne morate podešavati ništa; CUPS serveri automatski "
-"informišu vaš ra�unar o svojim štampa�ima. Svi štampa�i koji su trenutno "
-"poznati vašem ra�unaru su izlistani u odjeljku \"Udaljeni štampa�i\" glavnog "
-"prozora Printerdrake-a. Ako vaš CUPS server nije u lokalnoj mrežu, morate "
-"unijeti IP adresu CUPS servera i eventualno broj porta kako biste dobili "
-"informacije o štampa�ima sa servera, ina�e ostavite ova polja praznim."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba biti u formatu 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Broj porta treba biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP CUPS servera"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatska konfiguracija CUPSa"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Prepoznajem uređaje ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testiraj portove"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Dodaj novi štampa�"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampa�a\n"
-"\n"
-"Ovaj �arobnjak vam omogućuje da instalirate lokalne ili udaljene štampa�e "
-"koji će biti korišteni sa ovog ra�unara, a također i sa drugih ra�unara na "
-"mreži.\n"
-"\n"
-"On će od vas tražiti sve potrebne informacije kako bi štampa� bio podešen, a "
-"vama omogućen pristup svim dostupnim drajverima, opcijama drajvera i vrstama "
-"konekcije štampa�a."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokalni štampa�"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampa�a\n"
-"\n"
-"Ovaj �arobnjak će vam pomoći da instalirate vaš(e) štampa�(e) koji su "
-"povezani na ovaj ra�unar.\n"
-"\n"
-"Molim uklju�ite štampa�(e) na ovom ra�unaru i uklju�ite ih. Kliknite na "
-"dugme \"Dalje\" kada budete spremni, a na \"Odustani\" ako ne želite da "
-"podesite vaše štampa�e sada.\n"
-"\n"
-"Obratite pažnju da neki ra�unari mogu krahirati tokom automatskog "
-"prepoznavanja štampa�a. Isklju�ite opciju \"Automatski prepoznaj štampa�e\" "
-"ako je ovo slu�aj kod vas. Koristite \"Ekspertni mod\" printerdrake-a ako "
-"želite da podesite štampanje na udaljenom štampa�u a printerdrake ga ne "
-"izlista automatski."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatski prepoznaj štampa�e"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Čestitamo, vaš štampa� je sada instaliran i podešen!\n"
-"\n"
-"Možete štampati koristeći komandu \"Štampaj\" u vašoj aplikaciji (obi�no se "
-"nalazi u meniju \"Datoteka).\n"
-"\n"
-"Ako želite dodati, ukloniti ili promjeniti ime štampa�a, ili ako želite "
-"promjeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta "
-"štampe...), izaberite opciju \"Štampa�\" u \"Hardware\" sekciji Mandrake "
-"Kontrolnog centra."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatsko prepoznavanje štampa�a"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake može automatski prepoznati štampa�e koji su spojeni lokalno "
-"putem paralelne ili USB veze, ali zapamtite da na nekim sistemima automatsko "
-"prepoznavanje MOŽE ZALEDITI VAŠ SISTEM, ŠTO MOŽE VODITI DO OŠTEČENJA "
-"DATOTEÄŒNIH SISTEMA! Zato ovo radite NA VAÅ U ODGOVORNOST!\n"
-"\n"
-"Da li zaista želite da vaši štampa�i budu prepoznati automatski?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Koristi auto prepoznavanje"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Ru�no podesite štampa�"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detektovan %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Štampa� na paralelnom portu \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB štampa� \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Nije pronađen nijedan lokalni štampa�! Ako želite ru�no instalirati štampa�, "
-"unesite ime uređaja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/"
-"lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB štampa�: /dev/"
-"usb/lp0, drugi USB štampa�: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Morate unijeti naziv uređaja ili datoteke!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Nije pronađen nijedan lokalni štampa�!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Mrežni štampa�i mogu biti instalirani samo nakon završetka instalacije. "
-"Izaberite \"Hardware\" i zatim \"Štampa�\" u Mandrake Kontrolnom centru."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Da instalirate mrežne štampa�e, kliknite na \"Odustani\", prebacite na "
-"\"Ekspert mod\" i kliknite ponovo na \"Dodaj novi štampa�\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Sljedeći štampa� je prepoznat automatski: ako to nije onaj koji želite "
-"podesiti, uneiste naziv uređaja / naziv datoteke u ulaznu liniju"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Ovo je lista svih automatski prepoznatih štampa�a. Molimo izaberite štampa� "
-"koji želite podesiti ili unesite naziv uređaja / naziv datoteke na ulaznu "
-"liniju"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Sljedeći štampa� je prepoznat automatski. Podešavanje štampa�a će raditi "
-"potpuno automatski. Ako vaš štampa� nije ispravno prepoznat ili ako želite "
-"sami podesiti štampa�, uklju�ite \"Ru�no podešavanje\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Ovo je lista svih automatski prepoznatih štampa�a. Molim odaberite štampa� "
-"koji želite podesiti. Podešavanje štampa�a će raditi potpuno automatski. Ako "
-"vaš štampa� nije ispravno prepoznat ili ako želite sami podesiti štampa�, "
-"uklju�ite \"Ru�no podešavanje\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Molimo izaberite port na koji je vaš štampa� povezan ili unesite naziv "
-"uređaja / naziv datoteke na ulaznoj liniji"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Molimo izaberite na koji port je priklju�en vaš štampa�."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, "
-"LPT2:, ..., prvi USB štampa�: /dev/usb/lp0, drugi USB štampa�: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate izabrati ili unijeti štampa� / uređaj!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ru�no podešavanje"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Da li je vaš štampa� višenamjenski uređaj od HPa (OfficeJet, PSC, "
-"PhotoSmart, LaserJet 1100/1200/1220/3200/3300 sa skenerom)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instaliram HPOJ paket..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Provjeravam uređaj i podešavam HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instaliram SANE paket..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skeniram na vašem HP višenamjenskom uređaju"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Omogućujem CUPSu port štampa�a ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Čitam bazu podataka o štampa�ima ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcije udaljenog lpd štampa�a"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Da biste koristili udaljeni lpd štampa�, morate dati ime ra�unara za printer "
-"server i ime štampa�a na tom serveru."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Ime udaljenog ra�unara"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ime udaljenog štampa�a"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Ime udaljenog ra�unara nedostaje!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ime udaljenog štampa�a nedostaje!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcije SMB (Windows 9x/NT) štampa�a"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Da biste štampali na SMB štampa�, morate dati ime SMB ra�unara (Pažnja! Ono "
-"može biti razli�ito od TCP/IP imena!) i eventualno IP adresu print servera, "
-"kao i share naziv štampa�a kojem želite pristupiti i korisni�ko ime, šifru i "
-"informacije o radnoj grupi."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB server ime"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB server IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Share naziv"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Naziv samba share-a nedostaje!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcije NetWare štampa�a"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Da biste štampali na NetWare štampa�, trebate dati naziv NetWare print "
-"servera (Pažnja! Ono može biti razli�ito od njegovog TCP/IP imena!) kao i "
-"naziv reda za štampu na štampa�u kojem želite pristupiti i eventualno "
-"korisni�ko ime i šifru."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printer Server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Naziv reda za Å¡tampu"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP naziv servera nedostaje!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP naziv reda nedostaje!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/socket opcije štampa�a"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Da biste štampali na TCP ili socket štampa�, morate dati hostname štampa�a i "
-"opcionalno broj porta. Na HP JetDirect serverima broj porta je obi�no 9100, "
-"na ostalim serverima on može varirati. Pogledajte priru�nik vašeg hardware-a."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Hostname štampa�a"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Hostname štampa�a nedostaje!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI uređaja štampa�a"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Možete dati direktno URI za pristup štampa�u. URI mora zadovoljavati ili "
-"CUPS ili Foomatic specifikacije. Obratite pažnju da nisu svi tipovi URIja "
-"podržani od svih spoolera."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Trebate unijeti ispravan URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svakom štampa�u treba dati ime (npr. \"stampac\"). Polja Opis i Lokacija "
-"nije potrebno popuniti. Oni su komentari za korisnike."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Naziv štampa�a"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu podataka o štampa�ima..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model vašeg štampa�a"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake je uporedi ime modela koje je dobijeno od automatskog "
-"prepoznavanja štampa�a sa modelima koji su navedeni u njegovoj bazi podataka "
-"kako bi našao najbliži. Ovaj izbor možda nije ta�an, pogotovo ako vaš "
-"štampa� uopšte nije naveden u bazi. Stoga provjerite da li je izbor ispravan "
-"i ako je tako kliknite \"Model je ispravan\", u suprotnom kliknite "
-"\"Izaberite model ru�no\" kako biste ru�no izabrali vaš model štampa�a na "
-"sljedećem ekranu.\n"
-"\n"
-"Za vaš štampa� Printerdrake je našao:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Model je ispravan"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Izaberite model ru�no"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Izbor modela štampa�a"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Koji model štampa�a imate?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Molim provjerite da li je Printerdrake izvršio ispravno automatsko "
-"prepoznavanje modela vašeg štampa�a. Potražite ispravan model na listi ako "
-"kursor stoji na pogrešnom modelu ili na \"Raw štampa�\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ako štampa� nije naveden, izaberite kompatibilan (pogledajte uputstva za "
-"štampa�) ili sli�an."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Podešavanje OKI winprinter-a"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Sada podešavate OK laserski winprinter. Ovi štampa�i\n"
-"koriste jedan poseban komunikacijski protokol i stoga rade samo kada su "
-"spojeni na prvom paralelnom portu. Ako je vaš štampa� spojen na neki drugi "
-"port ili na print server molimo spojite štampa� na prvi paralelni port prije "
-"nego što odštampate testnu stranicu. Ina�e štampa� neće raditi. Drajver će "
-"ignorisati vaše podešenje tipa konekcije."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Podešavanje Lexmark inkjet-a"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet drajveri za štampu koje obezbjeđuje Lexmark podržavaju samo lokalne "
-"štampa�e, a ne i štampa�e na udaljenim ra�unarima ili print serverima. "
-"Molimo spojite vaš štampa� na lokalni port ili ga podesite na ra�unaru na "
-"koji je spojen."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Da biste mogli štampati sa vašim Lexmark inkjetom na ovoj konfiguraciji, "
-"potrebni su vam inkjet drajveri za štampu koje obezbjeđuje Lexmark (http://"
-"www.lexmark.com/). Idite na US stranicu i kliknite na dugme \"Drivers\". "
-"Zatim izaberite vaš model a zatim \"Linux\" kao operativni sistem. Drajveri "
-"dolaze u vidu RPM paketa ili shell skripte sa interaktivnom grafi�kom "
-"instalacijom. Ne morate obaviti ovu konfiguraciju na grafi�kom interfejsu. "
-"Odustanite odmah nakon licencnog ugovora. Zatim odštampaje stranice za "
-"poravnavanje glava sa \"lexmarkmaintain\" i podesite opcije poravnanja glave "
-"pomoću ovog programa."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Podrazumjevane opcije štampa�a\n"
-"\n"
-"Trebate provjeriti da su veli�ina papira i tip tinte (ako je dostupno) "
-"ispravno podešeni. Obratite pažnju da za voma veliku kvalitetu / rezoluciju "
-"štampa može postati znatno sporija."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s izvan raspona!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li želite da podesite ovaj štampa� (\"%s\")\n"
-"kao podrazumjevani štampa�?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testna stranica"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Molimo izaberite testne stranice koje ćete štampati.\n"
-"Pažnja: foto testna stranica može tražiti dosta vremena za štampu a na "
-"laserskim štampa�ima sa malo memorije možda neće nikad ni izaći. U većini "
-"slu�ajeva dovoljno je odštampati standardnu testnu stranicu."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Nijedna testna strana"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Å tampaj"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardna testna strana"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna strana (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna strana (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto testna strana"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Nemoj Å¡tampati testnu stranicu"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Å tampam testnu stranicu..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna stranica je poslana štampa�u.\n"
-"Može potrajati određeno vrijeme dok štampa� krene.\n"
-"Status Å¡tampanja:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testna stranica je poslana štampa�u.\n"
-"Može potrajati određeno vrijeme dok štampa� krene.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Da li je radilo ispravno?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Sirovi štampa�"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Za štampanje datoteke sa komandne linije (terminalski prozor) možete "
-"koristiti ili komandu \"%s <datoteka>\" ili grafi�ki alat za štampu: \"xpp "
-"<datoteka>\" ili \"kprinter <datoteka>\". Grafi�ki alati vam omogućuju da "
-"jednostavno odaberete štampa� i izmjenite podešenja opcija.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande možete također koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za Å¡tampu mnogih aplikacija, ali ovdje ne morate navesti ime "
-"datoteke jer tu datoteku obezbjeđuje sama aplikacija.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" također omogućava izmjenu opcija za pojedina�ni zadatak "
-"štampe. Jednostavno dodajte željena podešenja na komandnu liniju, npr. \"%s "
-"<datoteka>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampa� ili pro�itajte listu "
-"koja je data ispod ili kliknite na dugme \"Lista opcija za Å¡tampu\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Ovo je lista mogućih opcija za štampu za trenutni štampa�:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Za Å¡tampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ovu komandu također možete koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za Å¡tampu mnogih aplikacija. Ovdje nije potrebno navesti naziv "
-"datoteke jer tudatoteku obezbjeđuje sama aplikacija.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampa� kliknite na dugme "
-"\"Lista opcija za Å¡tampu\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Za Å¡tampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Možete također koristiti grafi�ki interfejs \"xpdq\" za podešavanje opcija i "
-"upravljanje zadacima Å¡tampe.\n"
-"Ako koristite KDE okruženje radne površine imate \"dugme za paniku\". To je "
-"ikona na radnoj površini �iji je naziv \"ZAUSTAVI štampa�!\", koja "
-"zaustavlja sve zadatke Å¡tampe odmah kada kliknete na nju. Ovo je korisno "
-"npr. u slu�aju zaglavljivanja papira.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komande \"%s\" i \"%s\" također omogućavaju izmjenu opcija za pojedina�ni "
-"zadatak štampe. Jednostavno dodajte željena podešenja na komandnu liniju, "
-"npr. \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Å tampam/skeniram na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Štampam na štampa� \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista opcija za Å¡tampu"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Vaš HP višenamjenski uređaj je automatski konfigurisan kako bi mogao "
-"skenirati. Sada možete skenirati sa komandne linije pomoću komande "
-"\"scanimage\" (\"scanimage -d hp:%s\" kako biste naveli scanner ako imate "
-"više od jednog) ili koristeći grafi�ke okoline \"xscanimage\" ili \"xsane\". "
-"Ako koristite GIMP, možete također skenirati koristeći odgovarajuću stavku u "
-"meniju \"File\"/\"Acquire\". Za više informacija, pogledajte još i \"man "
-"scanimage\" i \"man sane-hp\" na komandnoj liniji.\n"
-"\n"
-"Nemojte koristiti \"scannerdrake\" za ovaj uređaj!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Vaš HP višenamjenski uređaj je automatski konfigurisan kako bi mogao "
-"skenirati. Sada možete skenirati sa komandne linije pomoću komande \"ptal-hp "
-"%s scan ...\". Skeniranje putem grafi�kog interfejsa ili iz GIMPa još nije "
-"podržano za vaš uređaj. Više informacija možete naći u datoteci\"/usr/share/"
-"doc/hpoj-0.8/ptal-hp-scan.html\" na vašem ra�unaru. Ako imate HP LaserJet "
-"1100 ili 1200, možete skenirati samo ako ste instalirali opciju za "
-"skeniranje.\n"
-"\n"
-"Nemojte koristiti \"scannerdrake\" za ovaj uređaj!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Čitam podatke o štampa�u..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Premještanje konfiguracije štamap�a"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Možete kopirati konfiguraciju štampa�a koju ste napravili za spooler %s u % "
-"s, vaš trenutni spooler. Svi podaci o konfiguraciji (naziv štampa�a, opis, "
-"lokacija, tip konekcije kao i podrazumjevane opcije) će biti preuzeti, ali "
-"zadaci štampe neće biti preba�eni.\n"
-"Svi redovi ne mogu biti preba�eni zbog sljedećih razloga:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podržava štampa�e na Novell serverima ili štampa�ekoji šalju podatke "
-"u komandama slobodnog oblika.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podržava samo lokalne štampa�e, udaljene LPD štampa�ei Socket/TCP "
-"štampa�e.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podržavaju IPP štampa�e.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Pored toga, redovi koji nisu kreirani ovim programom ili sa \"foomatic-"
-"configure\" ne mogu biti premješteni."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Također štampa�i konfigurisani sa PPD datotekama koje su osigurali njihovi "
-"proizvođa�i ili sa vlastitim CUPS drajverima ne mogu biti preba�eni."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Ozna�ite štampa�e koje ćete prebacivati i kliknite na \n"
-"\"Prebaci\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Nemoj prebacivati štampa�e"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Prebaci"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Štampa� pod imenom \"%s\" već postoji pod %s: \n"
-"Kliknite na \"Prebaci\" da to prepišete.\n"
-"Možete također unijeti novo ime ili presko�iti ovaj štampa�."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Naziv štampa�a bi se trebao sastojati od slova, brojeva i donje linije"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Štampa� \"%s\" već postoji,\n"
-"da li sigurno želite prepisati ovu konfiguraciju?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novo ime štampa�a"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Prebacujem %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Prebacili ste vaš bivši podrazumjevani štampa� (\"%s\"),Da li će to također "
-"biti podrazumjevani štampa� podnovim sistemom štampe %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Osvježavam podatke o štampa�u..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Podešavanje udaljenog štampa�a"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Pokrećem mrežu..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Sada podesite mrežu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Mrežna funkcionalnost nije podešena"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sada ćete podesiti udaljeni štampa�. Ovo zahtjeva aktivan pristup mreži, ali "
-"vaša mreža još uvijek nije podešena. Ako želite nastaviti bez podešavanja "
-"mreže, nećete moći koristiti štampa� koji sada podešavate. Kako želite da "
-"nastavimo?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Nastavi bez podešavanja mreže"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Podešavanje mreže koje je napravljeno tokom instalacije sada ne može biti "
-"pokrenuto. Molim provjerite da li će mreža postati dostupna nakon bootanja "
-"sistema i popravite podešenja koristeći Mandrake Kontrolni centar, sekcija "
-"\"Mreža i Internet\"/\"Konekcija\", a zatim podesite štampa�, ponovo "
-"koristeći Mandrake Kontrolni centar, sekcija \"Hardver\"/\"Štampa�\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Mrežni pristup nije aktivan i nije mogao biti pokrenut. Molimo provjerite "
-"vašu konfiguraciju i vaš hardware. Onda ponovo pokušajte podesiti udaljeni "
-"štampa�."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Restartujem sistem za Å¡tampu ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "visok"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoi�an"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za Å¡tampu na sigurnosnom nivou: %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sada ćete instalirati sistem za štampu %s na sistemu koji je na sigurnosnom "
-"nivou % s.\n"
-"\n"
-"Ovaj sistem za štampu pokreće demon (pozadinski proces) koji �eka zadatke "
-"štampe i rješava ih. Ovom demonu takođe mogu pristupiti drugi ra�unari putem "
-"mreže, tako da je to moguća ta�ka napada. Stoga se tek rijetki od odabranih "
-"demona pokreću na ovom sigurnosnom nivou.\n"
-"\n"
-"Da li zaista želite podesiti štampanje na ovom ra�unaru?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Pokrećem sistem za štampu tokom boota"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem za štampu (%s) se neće pokrenuti automatski prilikom boota ra�unara.\n"
-"\n"
-"Moguće je da je automatsko pokretanje isklju�eno prilikom promjene na viši "
-"nivo sigurnosni, pošto je sistem za štampu moguća ta�ka napada.\n"
-"\n"
-"Da li želite da ponovo uklju�ite automatsko pokretanje sistema za štampu?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Provjeravam instalirani software..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Uklanjam LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Uklanjam LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Izaberite spooler štampa�a"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem štampanja (spooler) želite koristiti?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podešavam štampa� \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instaliram Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcije štampa�a"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pripremam PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Podešavam aplikacije..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Da li želite podesiti štampanje?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistem Å¡tampe: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Sljedeći štampa�i su podešeni. Dvokliknite na štampa� da promjenite njegove "
-"postavke; da ga u�inite podrazumjevanim štampa�em; da vidite informacije o "
-"njemu; ili da u�inite štampa� na udaljenom CUPS serveru upotrebljivim iz "
-"Star Office/OpenOffice.org-a."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Sljedeli štampa�i su podešeni. Kliknite dva puta na neki od njih za izmjenu "
-"postavki; ako ga želite u�initi podrazumjevanim štampa�em; ili da biste "
-"vidjeli informacije o njemu."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Osvježi listu štampa�a (kako bi bili prikazani svi dostupni CUPS štampa�i)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Promjenite sistem Å¡tampe"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Želite li podesiti još jedan štampa�?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Izmjeni konfiguraciju štampa�a"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Štampa� %s\n"
-"Šta želite da izmjenite na ovom štampa�u?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Uradi!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tip konekcije štampa�a"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Naziv štampa�a, opis, lokacija"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvođa� štampa�a, model, drajver"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Proizvođa� štampa�a, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Podesi štampa� kao podrazumjevani"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Dodaj ovaj štampa� u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Ukloni ovaj štampa� iz Star/Open Offica"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Å tampaj testnu stranicu"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Saznaj kako koristiti ovaj štampa�"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Ukloni štampa�"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Uklanjam stari štampa� \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Podrazumjevani štampa�"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Štampa� \"%s\" je sada podešen kao podrazumjevani štampa�."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Dodajem štampa� u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Štampa� \"%s\" je uspješno dodan u Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Nisam uspio dodati štampa� \"%s\" u Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Uklanjam štampa� iz Star/Open Offica"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Štampa� \"%s\" je uspješno uklonjen iz Star/Open Offica."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Nisam uspio ukloniti štampa� \"%s\" iz Star/Open Offica."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li želite da uklonite štampa� \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Uklanjam štampa� \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Podešavanje proxija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobro došli u alat za podešavanje proxija.\n"
-"qn Ovdje ćete biti u prilici da podesite vaše http i ftp proxije\n"
-"sa ili bez logina i Å¡ifre\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molimo popunite informacije o http proxiju\n"
-"Ostavite polja praznim ako ne želite http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba po�injati sa 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port treba biti broj"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molimo popunite informacije o ftp proxiju\n"
-"Ostavite polja praznim ako ne želite ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba po�injati sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Molimo unesite login i Å¡ifru za proxy, ako su potrebni.\n"
-"Ostavite polja praznim ako ne želite login/šifru"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Å¡ifra"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ponovo unesite Å¡ifru"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Šifre se ne poklapaju. Pokušajte opet!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne mogu pisati datoteku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (možda nedostaju raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA zvu�ni sistem (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron periodi�ni pokreta� komandi."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se koristi za nadgledanje statusa baterija i logovanje preko\n"
-"sysloga. Također se može koristiti za gašenje ra�unara kada su baterije "
-"potrošene."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreće komande zakazane putem at komande u vrijeme koje je zadato\n"
-"prilikom pokretanja at-a, te pokreće pozadinske komande kada je nizak "
-"prosje�ni nivo opterećenja."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardan UNIX program koji pokreće programe koje zada korisnik\n"
-"u periodi�nim terminima. vixie cron dodaje veći broj mogućnosti osnovnom\n"
-"UNIX cronu, uklju�ujući bolju sigurnost i moćnije opcije za podešavanje."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podršku za miša tekst-baziranim aplikacijama kao što je\n"
-"Midnight Commander. On također omogućuje konzolne isjeci/zaljepi operacije\n"
-"pomoću miša i uklju�uje podršku za pop-up menije na konzoli."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokreće probavanje hardware-a i opcionalno konfiguriše\n"
-"novi/izmjenjeni hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web server.  Koristi se za posluživanje HTML\n"
-"datoteka i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Demon za nadgledanje Interneta (obi�no nazvan inetd) pokreće\n"
-"raznolike druge Internet servise po potrebi. Odgovoran je za pokretanje\n"
-"raznih servisa, kao što su telnet, ftp, rsh i rlogin. Isklju�ivanje inetd-a\n"
-"isklju�uje sve servise za koje je on nadležan."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokrenite filtriranje paketa za Linux kernel seriju 2.2 kako\n"
-"biste postavili firewall i zaštitili vaš ra�unar od mrežnih napada."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket u�itava izabranu mapu tastature kao što je podešeno u\n"
-"/etc/sysconfig/keyboarc.  Ovo može biti izabrano korištenjem kbdconfig\n"
-"programa. Možete ovo ostaviti uklju�enim na većini ra�unara."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatsko prepoznavanje i podešavanje hardware-a tokom boota."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n"
-"kako bi se održala sistemska konfiguracija."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je demon za Å¡tampu koji je potreban da bi lpr radio ispravno.\n"
-"To je u osnovi server koji dodjeljuje zadatke štampe štampa�u/ima."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
-"i dostupnosti."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) koji se koristi za pretvaranje "
-"imena ra�unara u IP adrese."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
-"Manager/Windows) i NCP (NetWare) ta�ke montiranja."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/deaktivira sve mrežne interfejse koji su konfigurisani\n"
-"za pokretanje tokom boota."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n"
-"Ovaj servis omogućuje funkcionalnost NFS servera, koji je podešen putem\n"
-"/etc/exports datoteke."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n"
-"Ovaj servis omogućuje NFS funkcionalnost zaklju�avanja datoteka."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uklju�uje numlock bravu tipaka pod konzolom i\n"
-"XFree tokom boota."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podrška za OK 4w i kompatibilne windows štampa�e"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podrška je obi�no za podržavanje stvari kao što je\n"
-"ethernet i modemi u laptopima.  Neće se pokrenuti dok se ne\n"
-"konfiguriše tako da je sigurno imati ga instaliranog na ra�unarima\n"
-"kojima nije potreban."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao Å¡to\n"
-"su NFS i NIS. Portmap server mora raditi na ra�unarima koje služe kao\n"
-"serveri za protokole koji koriste RPC mehanizam."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, tj. program koji šalje poštu sa jednog "
-"ra�unara na drugu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Spašava i vraća sistemski raspon entropije za veću kvalitetu\n"
-"generisanja slu�ajnih brojeva."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodjeljuje sirove uređaje blokovskim urećajima (kao što su\n"
-"particije hard diska) za upotrebu aplikacijama kao Å¡to je Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon omogućuje da se automatska IP tabela rutiranja podešava\n"
-"preko RIP protokola. Mada se RIP �esto koristi na malim mrežama, "
-"kompleksniji\n"
-"protokoli rutiranja su potrebni za složene mreže."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokol omogućava korisnicima na mreži da dobave\n"
-"mjeru performansi za svaki ra�unar na toj mreži"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokol omogućava korisnicima na mreži da identificiraju\n"
-"ko je prijavljen na ostalim ra�unarima."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika prijavljenih na ra�unar na kojem radi rwho demon (sli�no fingeru)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Pokreće zvu�ni sistem na vašem ra�unaru"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je pogodnost pomoću koje mnogi demoni zapisuju poruke\n"
-"u razne sistemske dnevnike.  Dobra ideja je uvijek imati pokrenuti syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Pokreće drajvere za vaše usb uređaje."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreće X Font Server (ovo je nužno da bi XFree radio)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Å tampa"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Dijeljenje datoteka"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server baze podataka"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviran za %d registrovan"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servisi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktivan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, izvinite."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Prilikom boota"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Hvala vam Å¡to ste odabrali Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Dobro došli u svijet otvorenog izvornog koda"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Uspjeh MandrakeSofta je baziran na principima Slobodnog softvera. Vaš novi "
-"operativni sistem je rezultat zajedni�kog rada dijela Linux zajednice širom "
-"svijeta"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Pridružite se svijetu Slobodnog softvera"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Upoznajte Open Source zajednicu i postanite njen �lan. U�ite, podu�avajte i "
-"pomozite drugima tako što ćete pristupiti mnogim forumima za diskusiju koje "
-"ćete naći na našim \"Community\" stranicama"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet i razmjena poruka"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 pruža najbolji softver za pristup svemu što Internet "
-"pruža: Pretražujte web i pregledajte animacije pomoću Mozilla-e i "
-"Konquerora, razmjenjujte email i organizirajte vaše li�ne podatke pomoću "
-"Evolution i KMail-a, i mnogo drugog"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedija i grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vam omogućuje da potjerate vaš multimedijalni ra�unar do "
-"krajnjih granica! Koristite najnoviji softver za slušanje muzike i audio "
-"datoteka, mijenjajte i organizujte vaše slike i fotografije, gledajte TV i "
-"video-snimke i mnogo drugog"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Programiranje"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 je najbolja platforma za razvoj aplikacija. Otkrijte moć "
-"GNU gcc kompajlera kao i najboljih razvojnih okolina koje su Open Source"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolni centar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 Kontrolni centar je jedinstvena lokacija za puno "
-"prilagođavanje i podešavanje vašeg Mandrake sistema"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Korisni�ki okoliš"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 nudi vam na izbor 11 razli�itih grafi�kih desktop okolina "
-"i window managera uklju�ujući GNOME 1.4, KDE 2.2.2, Window Maker 0.8 i druge"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Serverski softver"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Pretvorite vaš ra�unar u moćan server sa svega nekoliko klikova mišem: Web "
-"server, email, firewall, file i print server, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 pruža najbolje Open Source igre - arkadne, akcione, "
-"karte, sportovi, strategije, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Želite li nau�iti Linux jednostavno, brzo i besplatno? MandrakeSoft vam nudi "
-"besplatno u�enje Linuxa kao i na�in za testiranje vašeg napretka na "
-"MandrakeCampus-u -- našem online centru za obuku"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitetna podrška od strane Linux zajednice i MandrakeSofta nalazi se odmah "
-"iza ugla. A ako ste već Linux veteran, postanite \"Expert\" i dijelite vaše "
-"znanje na našem web sajtu za podršku"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Za sve vaše IT projekte, naši konsultanti su spremni da analiziraju vaše "
-"potrebe i ponude prilagođeno rješenje. Iskoristite veliko iskustvo "
-"MandrakeSofta kao proizvođa�a Linux rješenja kako biste ponudili pravu IT "
-"alternativu za vaš biznis"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Čitav raspon Linux rješenja, kao i posebne ponude za proizvode i "
-"'potrepštine', dostupni su u našoj online radnji"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Za više informacija o MandrakeSoftovim profesionalnim uslugama i "
-"komercijalnoj ponudi, molimo posjetite sljedeću web stranicu:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu �itati vašu tabelu particija, previše je oštećena za mene :(\n"
-"Pokušaću izbrisati loše particije"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Greška!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu pronaći potrebnu image datoteku '%s'"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Podešavanje auto instalacije"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sada ćete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i "
-"mora biti korištena uz pažnju.\n"
-"\n"
-"Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili "
-"na ovom ra�unaru, pri ćemu ćete biti interaktivno upitani za neke korake, "
-"kako biste promjenili njihove vrijednosti.\n"
-"\n"
-"Za maksimalnu sigurnost, particioniranje i formatiranje nikad neće biti "
-"obavljeno automatski, bez obzira Å¡ta izaberete tokom instalacije na ovaj "
-"ra�unar.\n"
-"\n"
-"Da li želite nastaviti?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automatska konfiguracija koraka"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Molimo izaberite za svaki korak da li ćete ga ponoviti kao i u vašoj "
-"instalaciji ili će se obaviti ru�no"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Dobro došli.\n"
-"\n"
-"Parametri automatske instalacije su dostupni u odjeljcima lijevo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "ÄŒestitamo!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa je uspješno napravljena.\n"
-"Sada možete ponoviti vašu instalaciju."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Auto instalacija"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Dodaj stavku"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Ukloniti zadnju stavku"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Izvještaj \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Izvještaj o demonima\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Detalji izvještaja\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "ukupno napredak"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup-uj sistemske datoteke..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Datoteke backup-a hard diska..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Backup-uj korisni�ke datoteke..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Napredak backup-a hard diska..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Backup-uj ostale datoteke..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"lista datoteka poslana putem FTPa : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) problem sa FTP konekcijom: Nije bilo moguće poslati vaše backup datoteke "
-"putem FTPa.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Greška tokom slanja pošte. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Izbor datoteka"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Izaberite datoteke ili direktorije i kliknite na 'Dodaj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Molimo uklju�ite sve potrebne opcije.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu spasiti ili vratiti sve datoteke u vašem /etc direktoriju.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Backup sistemskih datoteka. ( /etc direktorij )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Koristi inkrementalni backup  (nemoj prebrisati stare backupe)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Zaobiđi kriti�ne datoteke (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Sa ovom opcijom bićete u mogućnosti da vratite bilo koju\n"
-" verziju vašeg /etc direktorija."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Molimo izaberite sve korisnike koje želite uklju�iti u vaš backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ne uklju�uj spremnik web preglednika"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Koristi inkrementalni backup  (nemoj prebrisati stare backupe)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Ukloni izabrano"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Korisnici"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Koristi FTP vezu za backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Molimo unesite ime ra�unara ili IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Molimo unesite direktorij za\n"
-" smještaj backupa na ovom ra�unaru."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Molimo unesite vaš login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Molimo unesite vašu šifru"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Zapamti ovu Å¡ifru"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP konekcija"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sigurna konekcija"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Koristi CD/DVDROM za backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Molimo izaberite vaš CD prostor"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Molim uklju�ite ako koristite CDRW medij"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Molim uklju�ite ako želite obrisati vaš CDRW prije"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Molim izaberite ako želite uklju�iti\n"
-" instalacijski boot na CDu."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Molim unesite naziv uređaja vašeg CD Writera\n"
-" npr: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Koristi traku za backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Molim unesite ime uređaja kojeg ćete koristiti za backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Molim unesite maksimalnu veli�inu\n"
-" dozvoljenu za Draxbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Molimo unesite direktorij za spasiti:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Koristi quotu za backup datoteke."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Mreža"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "svakog sata"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dnevno"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "sedmi�no"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "mjese�no"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Koristi demon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Izaberite vremenski interval\n"
-"između svakog backupa"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Molim izaberite medij\n"
-"za backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Koristi hard disk sa demonom"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Koristi FTP sa demonom"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Molim budite sigurni da je cron demon aktiviran u vašim servisima."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Pošalji mail izvještaj nakon svakog backupa na :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Å ta"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Gdje"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kada"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Više opcija"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Podešavanje Drakbackup-a"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Molimo izaberite gdje želite backupovati"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na hard disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "preko mreže"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Molim izaberite šta želite backupovati"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Backup sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Backup korisnika"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Ru�no izaberite korisnika"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Izvori backup-a: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- sistemske datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- korisni�ke datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ostale datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- spasi na hard disku u direktoriju : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- spasi na FTPu na ra�unaru : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisni�ko ime: %s\n"
-"\t\t u direktoriju: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opcije:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNe uklju�uj sistemske datoteke\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackupi koriste tar i bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackupi koriste tar i gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Demon (%s) uklju�uje :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Mrežu preko FTPa.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Mrežu preko SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Bez podešavanja, molim kliknite na Čarobnjak ili Napredno.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista podataka za vraćanje:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista oštećenih podataka:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Molimo isklju�ite ili pobrišite ga idući put."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Backup datoteke su oštećene"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Svi vaši izabrani podaci su          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          uspješno spašeni na %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Vrati konfiguraciju       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK za vraćanje ostalih datoteka."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista korisnika za vraćanje (samo najsvježiji datum po korisniku je zna�ajan)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Vrati sistemske datoteke prije:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "molim izaberite datum za vraćanje"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Koristi hard disk za backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Vrati sa hard diska"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Molim unesite direktorij gdje su smješteni backupi"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Izaberite drugi medij za vraćanje"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Drugi medij"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Vrati sistem"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Vrati korisnike"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Vrati ostalo"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "izaberite stazu za vraćanje (umjesto / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Izvrši novi backup prije vraćanja (samo za inkrementalni backup.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Pobriši korisni�ke direktorije prije vraćanja."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Vrati sve backupe"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Ru�no vraćanje"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pomoć"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Prethodni"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Spasi"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Izgradi backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Vrati"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Sljedeći"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Molimo pokrenite Izgradi backup prije vraćanja...\n"
-" ili provjerite da li je put za spašavanje ispravan."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Greška tokom sendmaila\n"
-"  vaš mail izvještaj nije poslan\n"
-"  Molim podesite sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista paketa za instalaciju"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Greška tokom slanja datoteke preko FTPa.\n"
-" Molimo ispravite vašu FTP konfiguraciju."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Molim izaberite podatke za vraćanje..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Molim izaberite medij za backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Molim izaberite podatke za backup..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nije pronađena konfiguraciona datoteka \n"
-"molim kliknite na ÄŒarobnjak ili Napredno."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "U izradi ... molim sa�ekajte."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup sistemskih datoteka"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup korisni�kih datoteka"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup ostalih datoteka"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Ukupan napredak"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "slanje datoteka putem FTPa"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Å aljem datoteke..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista podataka koji će biti smješteni na CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Molim unesite brzinu cd pisa�a"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Molim unesite naziv uređaja vašeg CD pisa�a (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Molim uklju�ite ako želite imati instalacioni boot na vašem CDu."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Backup-uj sada iz konfiguracijske datoteke"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Pogledaj postavke backupa."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Čarobnjak za podešavanje"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Napredno podešavanje"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Backup-uj sada"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Neke greške prilikom slanja poruka može izazvati \n"
-" loše podešen postfix. Ovo možete riješiti tako što ćete\n"
-" podesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %sa nije uspjela. Javila se sljedeća greška:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Pretraži instalirane fontove"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Isklju�i instalirane fontove"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "obradi sve fontove"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nije pronađen nijedan font"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "gotovo"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ne mogu naći nijedan font na montiranim particijama"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ponovo izaberi ispravne fontove"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ne mogu naći nijedan font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Pretraži fontove na listi instaliranih"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopiranje fontova"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalacija True Type fontova"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "molimo sa�ekajte tokom ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Završena True Type instalacija"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverzija fontova"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst kreiranje"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referenciranje"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf fonts konverzija"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm fonts konverzija"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Onemogući privremene datoteke"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Restartuj XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Onemogući datoteke fontova"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "restart xfs-a"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i "
-"instalirate na va[em sistemu.\n"
-"\n"
-"-Možete instalirati fontove koristeći uobi�ajen na�in. U rijetkim "
-"slu�ajevima, neispravni fontovi mogu zaglaviti vaš X Server."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Uvoz fontova"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Preuzmi fontove iz Windowsa"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Deinstaliraj fontove"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Napredne opcije"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista fontova"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izaberite aplikacije koje će podržavati fontove :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Razni štampa�i"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Lista instalacije"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "kliknite ovdje ako ste sigurni."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "ovdje ako ne."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Ništa izabrano"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Sve izabrano"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Pobriši listu"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Probni inicijali"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiraj fontove na sistem"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instaliraj i konvertuj fontove"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post Install"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Pobriši fontove sa mog sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post Uninstall"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet konekcije"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"aktivno.\n"
-"\n"
-"Šta želite uraditi?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "isklju�i"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "otkaži"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rekonfiguriši"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Isklju�ujem servere..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Dijeljenje Internet konekcije je sada isklju�eno."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"neaktivno.\n"
-"\n"
-"Šta želite uraditi?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "uklju�i"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Uklju�ujem servere..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Dijeljenje Internet konekcije je sada uklju�eno."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sada ćete konfigurisati vaš ra�unar za dijeljenje Internet konekcije.\n"
-"Sa ovom opcijom, ostali ra�unari na vašoj lokalnoj mreži će moći koristiti "
-"Internet konekciju ovog ra�unara. \n"
-"\n"
-"Napomena: potreban vam je poseban Mrežni adapter da biste podesili Lokalnu "
-"mrežu (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koristeći modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nema mrežnog adaptera na vašem sistemu!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Na vašem sistemu nije pronađen nijedan ethernet mrežni adapter. Molimo "
-"pokrenite alat za podešavanje hardware-a."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Mrežni interface"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Trenutno je samo jedan mrežni adapter podešen na vašem sistemu:\n"
-"\n"
-"%s\n"
-"\n"
-"Sada ću podesiti vašu Lokalnu mrežu sa ovim adapterom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molimo izaberite koji mrežni adapter će biti spojen na vašu Lokalnu mrežu."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Mrežni interfejs je već podešen"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Upozorenje, mrežni adapter (%s) je već podešen.\n"
-"\n"
-"Da li želite automatsko ponovno podešavanje?\n"
-"\n"
-"To možete obaviti ru�no, ali morate znati šta radite."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatsko ponovno podešavanje"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Prikaži postavke trenutnog interfejsa"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Trenutna konfiguracija `%s':\n"
-"\n"
-"Mreža: %s\n"
-"IP adresa: %s\n"
-"IP atributi: %s\n"
-"Drajver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Mogu zadržati trenutnu konfiguraciju i pretpostaviti da ste već podesili "
-"DHCP server; u tom slu�aju molim provjerite da li sam ispravno pro�itao "
-"mrežu C klase koju ćete koristiti na lokalnoj mreži; neću je ponovo podesiti "
-"i neću mijenjati vaše postavke DHCP servera.\n"
-"\n"
-"Ako ne, mogu ponovo podesiti vaš interfejs i podesiti DHCP server za vas.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokalna mreža C klase"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP adresa (ovog) DHCP servera"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Ponovo podesi interfejs i DHCP server"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalna mreža se ne završava sa `.0', izlazim."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Otkrivena konfiguracija firewalla!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje! Pronađena je postojeća konfiguracija firewalla. Možda će biti "
-"potrebno neko ru�no podešavanje nakon instalacije."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Podešavam..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Podešavam skripte, instaliram software, pokrećem servere..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi tokom instaliranja paketa %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je konfigurisano.\n"
-"Sada možete dijeliti Internet konekciju sa ostalim ra�unarima na vašoj "
-"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Podešavanje je već završeno, ali je trenutno isklju�eno."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Podešavanje je već završeno i trenutno je uklju�eno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje Internet konekcije nije nikad podešeno."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Podešavanje dijeljenja Internet konekcije"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobrodošli u alat za Dijeljenje Internet konekcije!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Podesi da pokrenete �arobnjak."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Podešavanje mreže (%d adaptera)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Briši profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil za brisanje:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naziv profila koji će biti kreiran (novi profil je kreiran kao kopija "
-"postojećeg) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Pristup Internetu"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Molim sa�ekajte"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Podesi Internet pristup..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Podešavanje LANa"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drajver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Podesi Lokalnu mrežu..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknite ovdje za pokretanje �arobnjaka ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "ÄŒarobnjak..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Primjeni"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo sa�ekajte... Primjenjujem konfiguraciju"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektovan"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nije konektovan"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektuj se..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Prekini konekciju..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, možda preko vaše mreže"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijedan podešen interfejs.\n"
-"Podesite ih prvo klikajući na 'Podesi'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Podešavanje LANa"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Pokrenut na bootu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "pokreni sada"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "zaustavi sada"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfejs još nije podešen.\n"
-"Pokrenite �arobnjak za podešavanje u glavnom prozoru"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijednu Internet konekciju.\n"
-"Napravite jednu klikajući na 'Podesi'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Podešavanje Internet konekcije"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Podešavanje Internet konekcije"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip konekcije: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Podešavanje nivoa sigurnosti"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koji želite koristiti"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kablovska)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kablovska)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kablovska)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Isto�na Evropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irska"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Zapadna Evropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australija"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Novi Zeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Južna Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Molim,\n"
-"unesite vaš tv standard i državu"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV standard :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Oblast :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Pretraga TV kanala je u toku ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Tražim TV kanale"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "upotreba: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaše tastature."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Želite li da BackSpace vrati Delete u konzoli?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Promjenite CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Molimo ubacite Instalacioni CD u vaš CD-ROM uređaj i pritisnite Ok kad ste "
-"spremni.\n"
-"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu da pokrenem live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Prikaži samo za izabrani dan"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/_New"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datoteka/_Otvori"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datoteka/_Sa�uvaj"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datoteaka/Sa�uvaj _kao"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datoteka/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcije"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcije/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pomoć"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoć/_O programu..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Korisnik"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Poruke"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Objašnjenja Mandrake alata"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "pretraživanje"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Alat za pregled vaših logova"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Podešavanja"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "matching"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "but not matching"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Izaberi datoteku"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendar"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Sadržaj datoteke"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Mail/SMS obavijest"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "molim sa�ekajte, parsiram datoteku: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Podešavanje Mail/SMS obavijesti"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Dobro došli u aplikaciju za podešavanje mail/SMSa.\n"
-"\n"
-"Ovdje možete podesiti sistem obavještavanja.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "postavke servisa"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Možete primiti obavještenje ako neki od izabranih servisa prestane raditi"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "postavka opterećenja"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Primićete upozorenje ako je opterećenje (system load) veće od ove vrijednosti"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "postavka upozorenja"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Podesite na�in na koji će vas sistem obavijestiti"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Sa�uvaj kao..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Molimo izaberite vrstu vašeg miša."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nije pronađen serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuliraj treće dugme?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s je pronađen na %s, podesi ga ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Izaberite skener"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ovaj %s skener nije podržan"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot uređaj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Ovaj %s skener se mora podesiti iz printerdrake-a.\n"
-"Možete pokrenuti printerdrake iz Mandrake Kontrolnog centra u odjeljku "
-"Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Podešavanje firewalla"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Podešavanje firewalla"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Već ste podesili firewall.\n"
-"Kliknite na Podesi kako bi se izmjenio ili uklonio firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknite na Podesi za podešavanje standardnog firewalla"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Izaberite svoj jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Izaberite klasu instalacije"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Prepoznavanje hard diska"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Podešavanje miša"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Izaberite vašu tastaturu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podešavanje datote�nih sistema"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiranje particija"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izaberite pakete za instalaciju"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistem instalacije"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodajte korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podešavanje mreže"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Podešavanje servisa"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalacija bootloadera"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Napravite boot disketu"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Podešavanje X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instaliraj sistemske update"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Napusti instalaciju"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall podešava�\n"
-"\n"
-"On podešava li�ni firewall za ovaj Mandrake Linux ra�unar.\n"
-"Za moćnu soluciju posebnog firewalla, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada ćemo vam postaviti pitanja o servisima kojima želite dozvoliti\n"
-"pristup sa Interneta.  Molimo razmislite pažljivo o ovim pitanjima,\n"
-"jer je sigurnost vašeg ra�unara bitna.\n"
-"\n"
-"Molimo vas, ako trenutno ne koristite neki od ovih servisa, isklju�ite\n"
-"ga firewallom.  Možete izmjeniti ove postavke kad god želite ponovnim\n"
-"pokretanjem ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut web server na ovom ra�unaru za koji želite da ga\n"
-"cijeli Internet vidi? Ako imate pokrenut webserver kojem ćete pristupati\n"
-"samo sa ovog ra�unara, možete slobodno ovdje odgovoriti NE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut name server (DNS) na ovom ra�unaru? Ako niste\n"
-"podesili DNS radi davanja informacija o IP i zoni cijelom Internetu, \n"
-"molimo vas odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li želite da dozvolite ulazne Secure Shell (ssh) konekcije? Ovo\n"
-"je zamjena za telnet koju možete koristiti za prijavu. Ako sada koristite\n"
-"telnet, definitivno trebate preći na ssh. Telnet nije kriptovan, tako\n"
-"da neki napada�i mogu ukrasti vašu šifru ako ga koristite. ssh je\n"
-"kriptovan i ne dozvoljava ovo prisluškivanje."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li želite dozvoliti ulazne telnet konekcije?\n"
-"Ovo je užasno nesigurno, kao što je objašnjeno na prethodnom\n"
-"ekranu. Strogo preporu�ujemo da odgovorite Ne ovdje i koristite\n"
-"ssh umjesto telneta.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li imate pokrenut FTP server za koji želite da je pristupa�an sa\n"
-"Interneta? Ako da, onda strogo preporu�ujemo da ga koristite samo\n"
-"za anonimne transfere. Bilo koju Å¡ifru koja je poslana putem FTPa\n"
-"mogu ukrasti napada�i, pošto FTP također ne koristi kriptovanje.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut mail server ovdje? Ako Å¡aljete poruke\n"
-"kroz pine, mutt ili neki drugi tekst-bazirani mail klijent, onda\n"
-"vjerovatno imate.  U suprotnom, trebali biste isklju�iti ovo \n"
-"firewallom.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut POP ili IMAP server ovdje? Ovo bi\n"
-"bilo korišteno za smještaj ne-web-baziranih mail naloga\n"
-"za ljude na ovom ra�unaru.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Čini se da koristite 2.2 kernel.  Ako je vaša mrežna IP\n"
-"automatski podešena putem ra�unara u vašoj kući ili\n"
-"uredu (dinami�ki dodjeljena), moramo ovo dozvoliti.  Da\n"
-"li je ovo slu�aj?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li vaš ra�unar sinhronizuje vrijeme sa drugim ra�unarom?\n"
-"Naj�ešće, ovo se koristi u srednje velikim Unix/Linux organizacijama\n"
-"za sinhronizaciju vremena za pravljenje dnevnika i sli�no.  Ako\n"
-"niste dio većeg ureda i niste �uli za ovo, onda vjerovatno\n"
-"ovo nije slu�aj."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Podešavanje završeno.  Možemo li zapisati ove izmjene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu otvoriti %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu otvoriti %s za pisanje: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ne, ne treba mi DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Da, treba mi DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ne, ne treba mi NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Da, treba mi NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Nemoj snimiti"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Snimi i izađi"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Čarobnjak za podešavanje firewalla"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ne (isklju�i pristup sa interneta)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Da (dozovoli pristup sa interneta)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Molim sa�ekajte... Provjeravam instalirane pakete"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Greška prilikom instaliranja paketa : %s i Bastille.\n"
-" Pokušajte ih instalirati ru�no."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mrežni ra�unar (klijent)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ured"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za vaš Palm Pilot ili Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name i Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: obrada teksta (kword, abiword), tabli�ni alati (kspread, "
-"gnumeric), pdf preglednici itd."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Alati vezani za zvuk: mp3 ili midi playeri, mixeri itd."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Howto-i na temu Linuxa i Slobodnog Software-a"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skup alata za mail, news, web, prenos datoteka i chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Baze podataka"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL baza podataka"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lakše podešavanje ra�unara"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Korisni programi"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Alati za konzolu"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijalna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Podešavanje"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Druge grafi�ke okoline (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, osnovno grafi�ko okruženje sa izborom pratećih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafi�ko okruženje"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za pravljenje i prženje CDova"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafi�ki programi kao što je Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi i include datoteke"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Network Computer server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Stanica za igru"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video playeri i editori"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkadne igre, igre za tablu, strategije itd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Skup alata za �itanje i slanje pošte i news-a (pine, mutt, tin...) i "
-"pregledanje Weba"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, nadzor"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Li�ne finansije"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafi�ki okoliš sa skupom korisni�ki orjentisanih aplikacija i alata za "
-"radnu površinu"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole uklju�ujući ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programi za pregled i editovanje zvuka i videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ostale grafi�ke okoline"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editori, ljuske, datote�ni alati, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za upravljanje vašim finansijama, kao što je gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Upravljanje li�nim informacijama"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - Prženje CDa"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Znanstvena radna stanica"
-
-#~ msgid "About"
-#~ msgstr "O programu"
-
-#~ msgid "             Help           "
-#~ msgstr "             Pomoć           "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-2,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Ne mogu pristupiti kernel modulima koji odgovaraju vašem kernelu "
-#~ "(nedostaje datoteka %s)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Nijedan"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Izaberite default štampa�!"
-
-#~ msgid ""
-#~ "With remote CUPS servers, you do not have to configure any printer here; "
-#~ "CUPS servers inform your machine automatically about their printers. All "
-#~ "printers known to your machine currently are listed in the \"Default "
-#~ "printer\" field. Choose the default printer for your machine there and "
-#~ "click the \"Apply/Re-read printers\" button. Click the same button to "
-#~ "refresh the list (it can take up to 30 seconds after the start of CUPS "
-#~ "until all remote printers are visible). When your CUPS server is in a "
-#~ "different network, you have to give the CUPS server IP address and "
-#~ "optionally the port number to get the printer information from the "
-#~ "server, otherwise leave these fields blank."
-#~ msgstr ""
-#~ "Sa udaljenim CUPS serverom, ne morate podešavati nijedan\n"
-#~ "štampa� ovdje; CUPS serveri obavještavaju vaš ra�unar automatski\n"
-#~ "o svojim štampa�ima. Svi štampa�i koji su trenutno poznati vašem\n"
-#~ "ra�unaru su izlistani u polju \"Podrazumjevani štampa�\". Izaberite "
-#~ "podrazumjevani\n"
-#~ "štampa� za vaš ra�unar ovdje i kliknite na dugme \"Primjeni/Ponovo\n"
-#~ "pro�itaj štampa�e\". Kliknite na isto dugme za osvježavanje liste (može\n"
-#~ "trajati do 30 sekundi nakon pokretanja CUPSa dok svi udaljeni štampa�i\n"
-#~ "ne postanu vidljivi). Kada je vaš CUPS server u razli�itoj mreži, morate "
-#~ "dati\n"
-#~ "IP adresu CUPS servera i eventualno broj porta kako bi se dobavile "
-#~ "informacije\n"
-#~ "o štampa�ima sa servera, ina�e ostavite ova polja praznim."
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Primjeni/Ponovo pro�itaj štampa�e"
-
-#~ msgid "Configure printing system"
-#~ msgstr "Podešavanje sistema štampe"
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
deleted file mode 100644
index 0663d463f..000000000
--- a/perl-install/share/po/ca.po
+++ /dev/null
@@ -1,14978 +0,0 @@
-# drakX translation to Catalan
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Copyright (c) 1999-2001 Softcatalà
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-04-10 23:29+0200\n"
-"Last-Translator: Softcatalà <traddrake@softcatala.org>\n"
-"Language-Team: Catalan\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configura tots els capçals independentment"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Utilitza l'extensió Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configura només la targeta \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuració Multi-head"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"El vostre sistema permet l'ús d'una configuració de múltiples capçals.\n"
-"Què voleu fer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Targeta gràfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccioneu una targeta gràfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolliu un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolliu un servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quina configuració de l'XFree voleu tenir?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
-"l'Xfree %s.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "Xfree %s amb acceleració 3D de maquinari"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s amb acceleració 3D de maquinari EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
-"l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuració de l'XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccioneu la mida de memòria de la vostra targeta gràfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolliu les opcions per al servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolliu un monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Els dos paràmetres més importants son la velocitat de refresc vertical, que\n"
-"és la velocitat a què es refresca tota la pantalla, i el més important, la\n"
-"velocitat de sincronització horitzontal, que és la velocitat a què es\n"
-"visualitzen les línies d'exploració.\n"
-"\n"
-"És MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un abast\n"
-"de sincronització superior a les possibilitats del vostre monitor, perquè\n"
-"el podríeu fer malbé.\n"
-"En cas de dubte, sigueu conservador amb aquest paràmetre."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Velocitat de refresc horitzontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Velocitat de refresc vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "El monitor no està configurat"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La targeta gràfica encara no està configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Encara no s'han escollit les resolucions"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Avís: la comprovació d'aquesta targeta gràfica pot penjar-vos l'ordinador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Comprova la configuració"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"intenteu canviar alguns paràmetres"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "S'ha produït un error:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Sortida en %d segons"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "És aquest el paràmetre corrcte?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "S'ha produït un error, intenteu canviar alguns paràmetres"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolució"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolliu la resolució i la profunditat de color"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Targeta gràfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor xFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Més"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "D'acord"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostra'ls tots"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolucions"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposició del teclat: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipus de ratolí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositiu del ratolí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronització horitzontal del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresc vertical del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Targeta gràfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Targeta gràfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memòria gràfica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profunditat del color: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolució: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor xFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de l'xFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "S'està preparant la configuració de l'X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Què voleu fer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Canvia el monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Canvia la targeta gràfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Canvia les opcions del servidor"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Canvia la resolució"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostra la informació"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Torna-ho a comprovar"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Surt"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Voleu conservar els canvis?La configuració actual és:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X a l'inici"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que executi X automàticament "
-"durant l'arrencada.\n"
-"Voleu que X s'iniciï quan torneu a arrencar l'ordinador?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Si us plau, torneu a entrar a %s per activar els canvis"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-Enrere"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colors (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.768 colors (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.536 colors (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milions de colors (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4.294 milions de colors (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB o més"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estàndard, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrellaçada (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrellaçada, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA ampliada, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA no entrellaçada, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA d'alta freqüència, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-freqüència que pot fer 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-freqüència que pot fer 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-freqüència que pot fer 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que pot fer 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que pot fer 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partició d'arrencada"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector de la unitat (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instal·lació del SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "On voleu instal·lar el carregador d'arrencada?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instal·lació del LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO amb menú de text"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO amb menú gràfic"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrencada des de DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opcions principals del carregador d'arrencada"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Carregador d'arrencada a utilitzar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instal·lació del carregador d'arrencada"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositiu d'arrencada"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (no funciona en BIOS antics)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacte"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacte"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mode de vídeo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Demora abans d'arrencar la imatge predeterminada"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Contrasenya"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Contrasenya (un altre cop)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limita les opcions de la línia d'ordres"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limita"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Buida /tmp en cada arrencada"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Habilita perfils múltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Introduïu la mida de la RAM en Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L'opció ``Limita les opcions de la línia d'ordres'' no té cap ús sense una "
-"contrasenya"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Missatge d'inicialització"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Demora de firmware obert"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Temps màxim d'arrencada del nucli"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Voleu habilitar l'arrencada des de CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Voleu habilitar l'arrencada des d'OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS per defecte?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aquestes són les diferents entrades.\n"
-"Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Afegeix"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fet"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Modifica el RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Quin tipus d'entrada voleu afegir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Un altre SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Un altre SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Un altre SO (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imatge"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Arrel"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Afegeix"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura-escriptura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taula"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "No segur"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Predeterminat"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Elimina l'entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "No es permet una etiqueta buida"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Heu de tenir una partició d'intercanvi"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Aquesta etiqueta ja està en ús"
-
-# #msgid "Found %s %s interfaces"
-# #msgstr "S'han trobat interfícies %2$s %1$s"
-#: ../../any.pm_.c:656
-#, fuzzy, c-format
-msgid "Found %s %s interfaces"
-msgstr "S'han trobat interfícies %2$s %1$s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "En teniu una altra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Teniu alguna interfície %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sí"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Mira la informació del maquinari"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "S'està instal·lant el programa de control per a la targeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(mòdul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quin programa de control %s he de provar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En alguns casos, el programa de control %s necessita informació addicional\n"
-"per funcionar correctament, tot i que normalment funciona bé sense ella.\n"
-"Voleu especificar opcions addicionals o deixar que el programa de control\n"
-"cerqui al vostre ordinador la informació que necessita? Aquesta recerca\n"
-"podria blocar l'ordinador, però això no causaria cap dany."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Exploració automàtica"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especifica les opcions"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ara podeu proporcionar les seves opcions per al mòdul %s.\n"
-"Les opcions estan amb el format ``nom=valor nom2=valor2 ...''.\n"
-"Per exemple, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcions del mòdul:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ha fallat la càrrega del mòdul %s.\n"
-"Voleu tornar-ho a intentar amb altres paràmetres?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ja s'ha afegit %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Aquesta contrasenya és massa senzilla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Si us plau, introduïu un nom d'usuari"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nom d'usuari només pot contenir lletres en minúscula, números, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Aquest nom d'usuari ja s'ha afegit"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Afegeix un usuari"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduïu un usuari\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accepta l'usuari"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nom real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nom d'usuari"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Entrada automàtica"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que entri automàticament amb un "
-"nom d'usuari.\n"
-"Si no voleu utilitzar aquesta característica, feu clic al botó Cancel·la."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolliu l'usuari per omissió:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolliu el gestor de finestres per executar:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Podeu seleccionar altres idiomes, que quedaran disponibles després de la "
-"instal·lació"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tots"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Afegeix un usuari"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalitzada"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "S'està iniciant el CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Quins paquets voleu instal·lar"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancel·la"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Benvinguts, crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estàndard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alt"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alt"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoic"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt més "
-"fàcil\n"
-"d'utilitzar, però també molt sensible: no s'ha d'utilitzar en un ordinador\n"
-"connectat a d'altres o a Internet. No s'hi accedeix mitjançant contrasenya."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ara, la contrasenya està habilitada, però l'ús com a ordinador de xarxa "
-"segueix sense ser recomanable."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Aquesta és la seguretat estàndard recomanada per a un ordinador que\n"
-"s'utilitzarà per connectar-se a Internet com a client. Ara hi ha "
-"comprovacions de seguretat."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Amb aquest nivell de seguretat, la utilització d'aquest sistema com a\n"
-"servidor esdevé possible.\n"
-"La seguretat és ara prou alta com per utilitzar el sistema com a servidor\n"
-"que accepti connexions de molts clients. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Assumim les característiques del nivell 4, però ara el sistema està\n"
-"totalment tancat.\n"
-"Les característiques de seguretat estan al màxim."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escolliu el nivell de seguretat"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "S'està establint el nivell de seguretat"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolliu les opcions per al servidor"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvingut al %s, el selector de sistema operatiu!\n"
-"\n"
-"Trieu un sistema operatiu de la lista superior, o espereu\n"
-"%d segons per arrencar en el sistema operatiu predeterminat.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Benvingut al GRUB, el selector de sistema operatiu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Utilitzeu les tecles %c i %c per seleccionar quina posició està ressaltada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Premeu Intro per arrencar el SO seleccionat, 'e' per editar les"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordres prèvies a l'arrencada, o 'c' per obtenir una línia d'ordres."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La posició ressaltada arrencarà automàticament dintre de %d segons."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "no hi ha prou espai a /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escriptori"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menú Inici"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "On voleu instal·lar el carregador d'arrencada?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "encara no s'ha implementat cap ajuda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fitxer"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fitxer/_Surt"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor de categorització NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ tradicional"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Executa l'Aurora durant l'arrencada"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Mode LILO/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Mode Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvingut a la utilitat de compartició de la connexió a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a Configura per executar l'auxiliar de configuració."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Mode de sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Executa el sistema X-Window en iniciar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "No, no vull l'entrada automàtica"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sí, vull l'entrada automàtica amb aquest (usuari, escriptori)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "D'acord"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "no es pot obrir /etc/inittab per a lectura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "kB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuts"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segons"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "No puc afegir cap més partició"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Podeu seleccionar altres idiomes, que quedaran disponibles després de la "
-"instal·lació"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "França"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemany"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grec"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Noruec"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Consulteu"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italià"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "sèrie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Si us plau, feu primer una còpia de seguretat de les vostres dades"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Llegiu-ho atentament!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2.048\n"
-"sectors n'hi ha prou) al començament del disc"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Error"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Trieu una acció"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teniu una partició FAT gran\n"
-"(utilitzada normalment pel DOS/Windows de Microsoft).\n"
-"Suggereixo que primer en canvieu la mida\n"
-"(feu-hi clic i després feu clic a \"Canvia la mida\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalls"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ha fallat el muntatge"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercanvia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Buit"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Altres"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipus de sistema de fitxers"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilitzeu ``%s'' al seu lloc"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Suprimeix"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Utilitzeu primer ``Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar el tipus de la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Trieu una acció"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crea una nova partició"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normal > Expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Expert > Normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Desfés"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Voleu continuar igualment?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Surt sense desar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Voleu sortir sense desar la taula de particions?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Assigna automàticament"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Buida-ho tot"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Informació del correu"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "S'utilitzen totes les particions primàries"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "No puc afegir cap més partició"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Per tenir més particions, suprimiu-ne una per poder crear una partició "
-"ampliada"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Escriu la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Muntatge automàtic del suport extraïble"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Seleccioneu el fitxer"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La còpia de seguretat de la taula de particions no té la mateixa mida\n"
-"Voleu continuar igualment?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advertència"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inseriu un disquet a la unitat\n"
-"Se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "S'està intentant rescatar la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Informació del correu"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punt de muntatge"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcions"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Canvia la mida"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mou"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formata"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Munta"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Afegeix al RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Afegeix al LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmunta"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Elimina del RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Elimina del LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifica el RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Utilitza per a loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crea una nova partició"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "sector d'inici: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Mida en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipus de sistema de fitxers: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punt de muntatge: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferència: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "S'està formatant el fitxer de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Canvia el tipus de partició"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Quin sistema de fitxers voleu?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "On voleu muntar el fitxer de loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "On voleu muntar el dispositiu %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No es pot anul·lar el punt de muntatge, perquè aquesta partició\n"
-"s'utilitza per al loopback. Elimineu primer el loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "S'estan calculant els límits del sistema de fitxers de la FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "S'està canviant la mida"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "No es pot canviar la mida d'aquesta partició"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Cal fer una còpia de seguretat de totes les dades d'aquesta partició"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar la mida de la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escolliu la nova mida"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Mida en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "A quin disc us voleu desplaçar?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "A quin sector us voleu desplaçar?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "S'està desplaçant"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "S'està desplaçant la partició..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolliu un RAID existent al qual afegir"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nou"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolliu un LVM existent al qual afegir"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nom LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Aquesta partició no es pot utilitzar per al loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nom del fitxer de loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nom real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Un altre loopback ja està utilitzant el fitxer, escolliu-ne un altre"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "El fitxer ja existeix. El voleu utilitzar?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcions del mòdul:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositiu"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivell"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "mida del tros"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Aneu amb compte: aquesta operació és perillosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Quin tipus de particionament?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Fins al moment no puc acceptar crear el /boot a la unitat (a un cilindre > "
-"1024).\n"
-"O esteu utilitzant LILO, i no funcionarà, o no l'esteu utilitzant i no "
-"necessiteu el /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partició que heu seleccionat per afegir com a arrel (/) està ubicada "
-"físicament més enllà del cilindre nº 1024 del disc dur, i no teniu cap "
-"partició /boot.\n"
-"Si teniu previst utilitzar el gestor d'arrencada LILO, penseu d'afegir una "
-"partició /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Heu seleccionat una partició de programari RAID com a arrel (/).\n"
-"Això no ho pot gestionar cap carregador d'arrencada sense una partició /"
-"boot.\n"
-"Per tant, assegureu-vos d'afegir una partició /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La taula de particions de la unitat %s s'escriurà al disc!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Us caldrà tornar a arrencar per tal que les modificacions tinguin efecte"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Després de formatar la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "S'està formatant"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "S'està formatant el fitxer de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "S'està formatant la partició %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "l'mkraid ha fallit"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolució: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositiu: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lletra d'unitat del DOS: %s (només és una suposició)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipus: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nom: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inici: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Mida: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectors"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindre %d a cilindre %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Sense formatar\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Fitxer(s) de loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"La partició s'ha arrencat per defecte\n"
-"    (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivell %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Mida del tros %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discs RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom del fitxer de loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"És possible que aquesta partició sigui\n"
-"una partició de programa de control;\n"
-"és millor que no la toqueu.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Aquesta partició Bootstrap\n"
-"especial és per arrencar\n"
-"el vostre sistema en dual.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Mida: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindres, %s capçals, %s sectors\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informació: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discs LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipus de taula de particions: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "al bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcions: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipus de sistema de fitxers: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Aquesta contrasenya és massa senzilla (ha de tenir com a mínim %d caràcters)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Canvia el tipus de partició"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "servidor DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatatge de %s ha fallat"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "no sé com formatar %s amb el tipus %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "s'ha produït un error en muntar %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "senzill"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Els punts de muntatge han de començar amb una /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ja hi ha una partició amb el punt de muntatge %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No podeu utilitzar un volum lògic LVM per al punt de muntatge %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers de root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necessiteu un sistema de fitxers real (ext2, reiserfs) per a aquest punt de "
-"muntatge\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "No podeu utilitzar un volum lògic LVM per al punt de muntatge %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "No hi ha prou espai per a l'assignació automàtica"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "S'ha produït un error en obrir %s per escriure: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"S'ha produït un error: no s'han trobat dispositius vàlids on crear nous "
-"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
-"problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "No teniu cap partició!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aquestes són les particions de Linux existents que s'han detectat a la\n"
-"vostra unitat de disc dur. Podeu conservar les eleccions fetes per "
-"l'assistent,\n"
-"són adequades per a un ús normal. Si les canvieu, heu de definir una "
-"partició\n"
-"root (\"/\"); no escolliu una partició massa petita, o no podreu instal·lar\n"
-"prou programari. Si voleu emmagatzemar les dades en una altra partició, "
-"també\n"
-"haureu de seleccionar una \"/home\" (només si teniu més d'una partició de\n"
-"Linux).\n"
-"\n"
-"\n"
-"Per a la vostra informació, cada partició està identificada d'aquesta "
-"manera: \"Nom\", \"Capacitat\".\n"
-"\n"
-"\n"
-"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de disc"
-"\",\n"
-"\"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
-"\"sd\"\n"
-"si és SCSI.\n"
-"\n"
-"\n"
-"\"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-"   * \"a\" significa \"unitat de disc mestre en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"c\" significa \"unitat de disc mestre en el controlador IDE secundari"
-"\",\n"
-"\n"
-"   * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primària de disc"
-"\", una \"b\" significa \"unitat secundària de disc\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ara podeu triar quins serveis voleu que s'iniciïn durant l'arrencada.\n"
-"\n"
-"\n"
-"Quan el ratolí passi sobre un element apareixerà un petit globus d'ajuda "
-"que\n"
-"explica la finalitat del servei.\n"
-"\n"
-"\n"
-"Aneu especialment amb cura en aquest pas si penseu utilitzar l'ordinador "
-"com\n"
-"a servidor: segurament no us interessarà iniciar serveis que no necessiteu.\n"
-"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
-"en un servidor.\n"
-"En general, seleccioneu només els serveis que realment necessiteu."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Ara és quan heu de decidir en quin lloc del vostre disc dur voleu "
-"instal·lar\n"
-"el sistema operatiu Mandrake Linux. Si el disc és buit, o si un sistema\n"
-"operatiu existent n'utilitza tot l'espai disponible, us caldrà particionar-\n"
-"lo. Bàsicament, particionar un disc dur consisteix en dividir-lo de manera\n"
-"lògica per crear espai on instal·lar el nou sistema Mandrake Linux.\n"
-"\n"
-"\n"
-"Atès que els efectes d'aquest procés solen ser irreversibles, el "
-"particionament \n"
-"us pot espantar si sou un usuari sense experiència.\n"
-"Aquest assistent simplifica aquest procés; abans de començar, consulteu el\n"
-"manual i preneu-vos el temps que calgui.\n"
-"\n"
-"\n"
-"Necessiteu, com a mínim, dues particions, una per al sistema operatiu en\n"
-"si i l'altra per a la memòria virtual (anomenada també \"Intercanvi\").\n"
-"\n"
-"\n"
-"Si les particions ja s'han definit (en una instal·lació anterior o "
-"mitjançant\n"
-"una altra eina de particionament), només caldrà que seleccioneu les que "
-"voleu\n"
-"utilitzar per instal·lar el sistema Linux.\n"
-"\n"
-"\n"
-"Si les particions encara no s'han definit, les heu de crear.\n"
-"Per fer-ho, utilitzeu l'assistent que trobareu més amunt; segons la\n"
-"configuració del vostre disc dur, hi ha diverses solucions possibles:\n"
-"\n"
-"* Utilitzar una partició existent: l'assistent ha detectat al vostre\n"
-"disc dur una o més particions de Linux existents. Si voleu conservar-les,\n"
-"escolliu aquesta opció.\n"
-"\n"
-"\n"
-"* Esborrar completament el disc: si voleu suprimir totes les dades i\n"
-"particions que teniu al disc dur i substituir-les pel sistema Linux-\n"
-"Mandrake, podeu escollir aquesta opció. Aneu amb compte, però, perquè,\n"
-"un cop la confirmeu, no podreu fer-vos enrere.\n"
-"\n"
-"\n"
-"* Utilitzar l'espai lliure de la partició del Windows: si teniu el "
-"Microsoft\n"
-"Windows instal·lat al disc dur i n'ocupa tot l'espai diponible, us hi "
-"caldrà\n"
-"crear espai lliure per a les dades del Linux. Per fer-ho, podeu suprimir la\n"
-"partició i les dades del Windows (consulteu les opcions \"Esborrar "
-"completament\n"
-"el disc\" o \"Mode expert\") o canviar la mida de la partició del Windows;\n"
-"aquest canvi de mida es pot dur a terme sense cap pèrdua de dades. Aquesta\n"
-"opció és la més recomanable si voleu utilitzar tant el Mandrake Linux com "
-"el\n"
-"Microsoft Windows al mateix ordinador.\n"
-"\n"
-"\n"
-"  Abans de decidir-vos per aquesta opció, tingueu en compte que la mida\n"
-"de la partició del Microsoft Windows serà més petita que ara. Això "
-"significa\n"
-"que tindreu menys espai lliure per emmagatzemar-hi dades o instal·lar-hi "
-"més\n"
-"programari.\n"
-"\n"
-"\n"
-"* Mode expert: si voleu particionar el disc dur manualment, podeu triar\n"
-"aquesta opció. Aneu amb compte, perquè és molt potent però també perillosa;\n"
-"podeu perdre fàcilment totes les dades. Per tant, no trieu aquesta opció "
-"tret\n"
-"que sapigueu exactament què esteu fent."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Les particions que s'acaben de definir s'han de formatar per poder-les\n"
-"utilitzar. El formatatge consisteix en crear-hi un sistema de fitxers).\n"
-"\n"
-"\n"
-"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
-"existents per eliminar les dades que contenen. Si és així, seleccioneu les\n"
-"particions que voleu formatar.\n"
-"\n"
-"\n"
-"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
-"existien; heu de tornar a formatar les particions que contenen el sistema\n"
-"operatiu (com ara \"/\", \"/usr\" o \"/var\"), però no les que contenen "
-"dades\n"
-"que voleu conservar (habitualment, /home).\n"
-"\n"
-"\n"
-"Aneu amb compte en seleccionar les particions; després del formatatge, "
-"totes\n"
-"les dades s'hauran suprimit i no en podreu recuperar cap.\n"
-"\n"
-"\n"
-"Feu clic a \"D'acord\" quan estigueu a punt per formatar les particions.\n"
-"\n"
-"\n"
-"Feu clic a \"Cancel·la\" si voleu seleccionar altres particions per "
-"instal·lar\n"
-"el nou sistema Mandrake Linux."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"El nou sistema operatiu Mandrake Linux s'està instal·lant. Aquesta\n"
-"operació trigarà uns quants minuts (dependrà de la mida total que\n"
-"hagueu escollit instal·lar i de la velocitat del vostre ordinador).\n"
-"\n"
-"Si us plau, tingueu paciència."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ara és quan heu de decidir quina(es) partició(ns) voleu utilitzar per\n"
-"instal·lar el sistems Mandrake Linux. Si ja s'han definit les particions "
-"(amb\n"
-"una instal·lació anterior de GNU/Linux o mitjançant una altra eina de\n"
-"particionament), podeu utilitzar les particiones existents. En cas "
-"contrari,\n"
-"s'han de definir particions al disc dur.\n"
-"\n"
-"\n"
-"Per crear particions, primer heu de seleccionar un disc dur. Podeu "
-"seleccionar\n"
-"el disc que s'ha de particionar fent clic a \"hda\" per a la primera unitat\n"
-"IDE, \"hdb\" per a la segona o \"sda\" per a la primera unitat SCSI, etc.\n"
-"\n"
-"\n"
-"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
-"\n"
-"   * Buidar-ho tot: aquesta opció suprimeix totes les particions que hi ha\n"
-"al disc dur seleccionat.\n"
-"\n"
-"\n"
-"   * Assignació automàtica: aquesta opció us permet crear automàticament "
-"les\n"
-"particions Ext2 i Intercanvi en l'espai lliure del disc dur.\n"
-"\n"
-"\n"
-"   * Rescatar la taula de particions: si la taula de particions està\n"
-"malmesa, podeu intentar recuperar-la mitjançant aquesta opció. Aneu\n"
-"amb compte i penseu que això pot fallar.\n"
-"\n"
-"\n"
-"   * Desfer: podeu utilitzar aquesta opció per anul·lar els canvis.\n"
-"\n"
-"\n"
-"   * Tornar a carregar: podeu utilitzar aquesta opció si voleu desfer\n"
-"tots els canvis i carregar la taula de particions inicial.\n"
-"\n"
-"\n"
-"   * Assistent: Si voleu utilitzar un assistent per particionar el disc "
-"dur,\n"
-"podeu utilitzar aquesta opció, que és la més recomanable si no teniu massa\n"
-"experiència en particionament.\n"
-"\n"
-"\n"
-"   * Restaurar des de disquet: si, en una instal·lació anterior, vau desar\n"
-"la taula de particions en un disquet, podeu recuperar-la mitjançant aquesta\n"
-"opció.\n"
-"\n"
-"\n"
-"   * Desar en disquet: si voleu desar la taula de particions en un disquet\n"
-"per poder-la recuperar, podeu utilitzar aquesta opció. És molt recomanable\n"
-"que l'utilitzeu.\n"
-"\n"
-"\n"
-"   * Fet: quan hagueu acabat de particionar el disc dur, utilizeu aquesta\n"
-"opció per desar els canvis.\n"
-"\n"
-"\n"
-"Per a la vostra informació, podeu accedir a qualsevol opció mitjançant el "
-"teclat:\n"
-"moveu-vos per les particions amb la tecles Tab i Fletxa amunt/Fletxa avall.\n"
-"\n"
-"\n"
-"Quan s'ha seleccionat una partició, podeu utilitzar:\n"
-"\n"
-"           * Ctrl+C per crear una nova partició (quan se n'ha seleccionat\n"
-"una de buida)\n"
-"\n"
-"           * Ctrl+D per suprimir una partició\n"
-"\n"
-"           * Ctrl+M per definir el punt de muntatge\n"
-"           \n"
-"\n"
-"           \n"
-"Si esteu fent la instal·lació en un ordinador PPC, potser voldreu crear una\n"
-"petita partició 'bootstrap' HFS d'un mínim d'1 MB per a ús del carregador\n"
-"d'arrencada 'yaboot'. Si decidiu fer-la una mica més gran, per exemple de\n"
-"50 MB, us serà d'utilitat per emmagatzemar un nucli de recanvi i una imatge\n"
-"del disc RAM per a situacions d'emergència durant l'arrencada."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"S'ha detectat més d'una partició de Microsoft Windows en la unitat de disc.\n"
-"Si us plau, trieu quina d'elles voleu redimensionar per instal·lar el nou\n"
-"sistema operatiu Mandrake Linux.\n"
-"\n"
-"\n"
-"Per a la vostra informació, cada partició està identificada d'aquesta "
-"manera; \"Nom Linux\", \"Nom\n"
-"Windows\" \"Capacitat\".\n"
-"\n"
-"\"Nom Linux\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de "
-"disc\",\n"
-"\"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
-"\"sd\"\n"
-"si és SCSI.\n"
-"\n"
-"\n"
-"\"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-"   * \"a\" significa \"unitat de disc mestre en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-"   * \"c\" significa \"unitat de disc mestre en el controlador IDE secundari"
-"\",\n"
-"\n"
-"   * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primària de disc"
-"\", una \"b\" significa \"unitat secundària de disc\", etc...\n"
-"\n"
-"\"Nom Windows\" és la lletra de la vostra unitat de disc sota Windows (el "
-"primer disc o partició s'anomena \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Si us plau, tingueu paciència. Aquesta operació pot trigar diversos minuts."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Escolliu \"Instal·lació\" si no teniu cap versió anterior de Mandrake Linux\n"
-"instal·lada a l'ordinador o si voleu utilitzar diversos sistemes operatius.\n"
-"\n"
-"\n"
-"Escolliu \"Actualització\" si voleu actualitzar un versió de Mandrake Linux "
-"que ja està instal·lada.\n"
-"\n"
-"\n"
-"Segons els vostres coneixements de GNU/Linux, podeu escollir un dels "
-"nivells\n"
-"següents d'instal·lació o actualització del sistema operatiu Mandrake "
-"Linux:\n"
-"\n"
-"* Recomanada: si mai no heu instal·lat un sistema operatiu GNU/Linux,\n"
-"escolliu aquest. La instal·lació serà molt fàcil i només se us faran\n"
-"unes poques preguntes.\n"
-"\n"
-"\n"
-"* Personalitzada: si coneixeu prou el GNU/Linux, podeu escollir l'ús\n"
-"principal (estació de treball, servidor, desenvolupament) del vostre\n"
-"sistema. Haureu de respondre més preguntes que en la instal·lació\n"
-"\"Recomanada\", de manera que, si escolliu aquest tipus d'instal·lació,\n"
-"haureu de saber com funciona el GNU/Linux.\n"
-"\n"
-"\n"
-"* Per a experts: si domineu el GNU/Linux, trieu aquest tipus\n"
-"d'instal·lació. Com en el cas de la instal·lació \"Personalitzada\"\n"
-"podreu escollir l'ús principal del vostre ordinador (estació de treball,\n"
-"servidor, desenvolupament). Aneu amb molt de compte abans de triar aquest\n"
-"tipus d'instal·lació; podreu realitzar una instal·lació altament\n"
-"personalitzada.\n"
-"  La resposta a algunes preguntes pot ser molt difícil si no teniu sòlids\n"
-"coneixements de GNU/Linux. Per tant, no escolliu aquest tipus "
-"d'instal·lació\n"
-"tret que sapigueu què esteu fent."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Si us plau, seleccioneu el port correcte. Per exemple, el port COM1 en MS\n"
-"Windows s'anomena ttyS0 en GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"El LILO (Linux Loader, carregador de Linux) i el Grub són carregadors\n"
-"d'arrencada: poden arrencar el GNU/Linux o qualsevol altre sistema operatiu\n"
-"que tingueu a l'ordinador. Normalment, aquests altres sistemes operatius\n"
-"es detecten i instal·len correctament, però si no és així, podeu afegir-los\n"
-"manualment en aquesta pantalla. Aneu amb compte de triar els paràmetres\n"
-"correctes.\n"
-"\n"
-"\n"
-"També és possible que no volgueu donar accés a tothom a aquests sistemes\n"
-"operatius; en aquest cas podeu suprimir les entrades corresponents, però\n"
-"aleshores us caldrà un disc d'arrencada per poder-los arrencar!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Heu d'indicar on voleu situar la informació necessària per\n"
-"arrencar el GNU/Linux.\n"
-"\n"
-"\n"
-"Tret que sabeu exactament què esteu fent, escolliu \"Primer sector\n"
-"de la unitat (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"El DrakX intentarà trobar el(s) adaptador(s) SCSI PCI. \n"
-"Si en troba, i sap quin programa de control utilitzar, el(s)\n"
-"instal·larà automàticament.\n"
-"\n"
-"\n"
-"Si no teniu cap adaptador SCSI, un adaptador SCSI ISA, o un\n"
-"adaptador SCSI PCI que el DrakX no reconegui, se us demanarà si teniu\n"
-"un adaptador SCSI al sistema. Si no en teniu cap, simplement feu clic a \"No"
-"\". Si feu\n"
-"clic a \"Sí\", apareixerà una llista de programes de control on podreu\n"
-"seleccionar l'adaptador concret.\n"
-"\n"
-"\n"
-"Si heu hagut de seleccionar l'adaptador manualment, el DrakX us preguntarà\n"
-"si voleu indicar opcions per a ell. Convé que deixeu que el DrakX comprovi\n"
-"el maquinari per a les opcions; això sol funcionar bé.\n"
-"\n"
-"\n"
-"Si no, us caldrà proporcionar les opcions al programa de control. Consulteu\n"
-"el capítol 3 de la Guia de l'usuari, secció \"Informació obtinguda del\n"
-"maquinari\" per saber com treure aquesta informació de la documentació del\n"
-"maquinari, del lloc web del fabricant (si teniu accés a Internet) o del\n"
-"Microsoft Windows (si el teniu al sistema)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
-"sistemes operatius, nuclis alternatius, o per a una imatge per a arrencades\n"
-"d'emergència.\n"
-"\n"
-"\n"
-"Per a altres OS, l'entrada només consta d'una etiqueta i de la partició "
-"arrel.\n"
-"\n"
-"\n"
-"Per al Linux, hi ha algunes opcions possibles: \n"
-"\n"
-"\n"
-"  - Label: és només el nom a indicar a l'indicador del yaboot per\n"
-"seleccionar aquesta opció d'arrencada.\n"
-"\n"
-"\n"
-"  - Image: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
-"variació de vmlinux amb una extensió.\n"
-"\n"
-"\n"
-"  - Rool: el dispositiu arrel o '/' per a la instal·lació del Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: en maquinari Apple, l'opció d'addició de nuclis s'utilitza\n"
-"força sovint per auxiliar en la inicialització de maquinari de vídeo o per\n"
-"habilitar l'emulació del botó del ratolí de teclat per als 2n i 3r botons,\n"
-"que sovint no existeixen, d'un ratolí Apple convencional. Alguns exemples\n"
-"d'això són:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: aquesta opció es pot utilitzar per carregar els mòduls "
-"inicials,\n"
-"abans que el dispostiu d'arrencada estigui disponible, o per tornar a "
-"carregar\n"
-"una imatge de disc RAM en una situació d'arrencada d'emergència.\n"
-"\n"
-"\n"
-"  - Initrd-size: la mida per defecte del disc RAM sol ser de 4.096 bytes. Si "
-"necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opció.\n"
-"\n"
-"\n"
-"  - Read-write: normalment, la partició 'root' es tracta inicialment com "
-"només de lectura per permetre una comprovació del sistema de fitxers abans "
-"que el sistema esdevingui 'viu'; podeu substituir aquesta opció aquí.\n"
-"\n"
-"\n"
-"  - NoVideo: en cas que el maquinari de vídeo de Apple resulti sigui\n"
-"especialment problemàtic, podeu seleccionar aquesta opció per arrencar\n"
-"en mode 'no-vídeo', amb el suport nadiu per a memòria intermèdia de marcs.\n"
-"\n"
-"\n"
-"  - Default: selecciona aquesta entrada com a selecció per defecte del\n"
-"Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
-"Aquesta opció també es ressaltarà amb un '*' si premeu Tab per veure les\n"
-"seleccions d'arrencada."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"El Yaboot és un carregador d'arrencada per a maquinari NewWorld MacIntosh.\n"
-"Pot arrencar tant el GNU/Linux com el MacOS o el MacOSX, si és que els "
-"teniu\n"
-"a l'ordinador. Normalment, aquests altres sistemes operatius es detecten i\n"
-"instal·len correctament; si no és així, però, en aquesta pantalla podeu\n"
-"afegir una entrada manualment. Aneu amb compte de triar els paràmetres\n"
-"correctes.\n"
-"\n"
-"\n"
-"Les opcions principals del Yaboot són:\n"
-"\n"
-"\n"
-"  - Missatge d'inicialització: un senzill missatge de text que apareix "
-"abans\n"
-"de l'indicador d'arrencada.\n"
-"\n"
-"\n"
-"  - Dispositiu d'arrencada: indica on voleu situar la informació necessària\n"
-"per arrencar el GNU/Linux. Normalment, haureu configurat abans una partició\n"
-"bootstrap que contindrà aquesta informació.\n"
-"\n"
-"\n"
-"  - Demora de l'Open Firmware: a diferència del LILO, amb el Yaboot hi ha\n"
-"dues demores disponibles. La primera d'elles es mesura en segons i, en "
-"aquest\n"
-"punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
-"\n"
-"\n"
-"  - Temps màxim d'arrencada del nucli: aquest temps màxim és similar a la "
-"demora d'arrencada del LILO. Després de seleccionar el Linux tindreu aquesta "
-"demora en 0,1 segons abans que se seleccioni la descripció per defecte del "
-"nucli.\n"
-"\n"
-"\n"
-"  - Habilitar l'arrencada des de CD?: si activeu aquesta opció podreu triar\n"
-"'C' per a CD al primer indicador de l'arrencada.\n"
-"\n"
-"\n"
-"  - Habilitar l'arrencada OF?: si activeu aquesta opció podreu triar 'N' "
-"per\n"
-"Open Firmware al primer indicador de l'arrencada.\n"
-"\n"
-"\n"
-"  - OS per defecte: podeu seleccionar amb quin OS, per defecte, s'arrencarà\n"
-"quan la demora de l'Open Firmware venci."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Escolliu el disc dur que voleu buidar per instal·lar la nova partició "
-"Linux-\n"
-"Mandrake. Aneu amb compte, se'n perdran totes les dades i no es podran "
-"recuperar."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Feu clic a \"D'acord\" si voleu suprimir totes les dades i\n"
-"particions que hi ha en aquesta unitat de disc. Aneu amb compte, perquè, un "
-"cop hagueu fet clic a \"D'acord\", no podreu recuperar cap dada ni partició "
-"del disc,\n"
-"incloent las dades de Windows.\n"
-"\n"
-"\n"
-"Feu clic a \"Cancel·la\" per anul·lar aquesta operació sense perdre cap "
-"dada\n"
-"ni partició d'aquest disc."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "No es pot utilitzar l'emissió sense un domini NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Aquest disquet no està formatat en FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per utilitzar aquesta selecció de paquets desada, arrenqueu la instal·lació "
-"amb ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "S'ha produït un error en llegir el fitxer %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Part del maquinari del vostre ordinador necessita programes de control\n"
-"``registrats'' per poder funcionar. En podeu trobar informació a: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Heu de tenir una partició arrel.\n"
-"Per fer-ho, creeu una partició (o feu clic a una d'existent).\n"
-"Després, trieu l'acció ``Punt de muntatge'' i doneu-li el valor '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Heu de tenir una partició d'intercanvi"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No teniu cap partició d'intercanvi\n"
-"\n"
-"Voleu continuar igualment?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Heu de tenir una partició d'intercanvi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Utilitza l'espai lliure"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Utilitza la partició existent"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "No existeix cap partició per utilitzar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Utilitza la particio Windows per al loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quina partició voleu utilitzar per al Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolliu les mides"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Mida de la partició arrel en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Mida de la partició d'intercanvi en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Utilitza l'espai lliure de la partició de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "A quina partició voleu canviar la mida?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "S'estan calculant els límits del sistema de fitxers de Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"El redimensionador de la FAT no pot gestionar la vostra partició, \n"
-"s'ha produït l'error següent: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"La partició de Windows està massa fragmentada; si us plau, executeu "
-"``defrag'' primer"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENCIÓ!\n"
-"\n"
-"Ara, el DrakX canviarà la mida de la vostra partició de Windows. Aneu amb\n"
-"compte: aquesta operació és perillosa. Si encara no ho heu fet, sortiu de "
-"la\n"
-"instal·lació, executeu l'Scandisk sota Windows (i potser també el Defrag), "
-"i\n"
-"torneu a començar la instal·lació. Feu també una còpia de seguretat de les\n"
-"vostres dades.\n"
-"Quan estigueu segur, premeu D'acord."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quina mida voleu deixar per a la partició de Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partició %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ha fallat la redimensió de la FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"No hi ha particions FAT a què canviar la mida o per utilitzar-les com a "
-"loopback (o no queda prou espai)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Esborra el disc complet"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Elimina el Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teniu més d'un disc dur; en quin voleu instal·lar el Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionament personalitzat de disc"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Utilitza l'fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ara podeu fer les particions a %s.\n"
-"Quan acabeu, no oblideu desar-les utiltzant `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "No teniu prou espai lliure a la partició de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "No puc trobar espai per a la instal·lació"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'assistent de particionament del DrakX ha trobat les solucions següents:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ha fallat el particionament: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "S'està activant la xarxa"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "S'està desactivant la xarxa"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"S'ha produït un error, però no sé com gestionar-lo correctament.\n"
-"Si continueu, és sota la vostra responsabilitat."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplica el punt de muntatge %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns paquets importants no s'han instal·lat correctament.\n"
-"La vostra unitat de CD-ROM, o bé el CD-ROM, són defectuosos.\n"
-"Comproveu el CD-ROM en un ordinador instal·lat mitjançant \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvingut a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "S'està introduint el pas `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"El vostre sistema està baix de recursos; podeu tenir algun problema en\n"
-"instal·lar el Mandrake Linux. Si això passa, podeu provar d'instal·lar-lo "
-"en\n"
-"mode text. Per fer-ho, premeu `F1' en arrencar des del CD-ROM i escriviu "
-"`text'"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Tipus d'instal·lació"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Si us plau, trieu un dels tipus d'instal·lació següents:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La mida total dels grups que heu seleccionat es d'aproximadament %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si no voleu instal·lar tants MB, seleccioneu el percentatge de paquets\n"
-"que voleu instal·lar.\n"
-"\n"
-"Un percentatge baix instal·larà només els paquets més importants;\n"
-"un percentatge del 100%% instal·larà tots els paquets seleccionats."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Només teniu prou espai al disc per a %d%% d'aquests paquets.\n"
-"\n"
-"Si en voleu instal·lar menys, seleccioneu el percentatge de paquets\n"
-"que voleu instal·lar.\n"
-"Un percentatge baix instal·larà només els paquets més importants;\n"
-"un percentatge del %d%% instal·larà tants paquets com sigui possible."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Podreu fer una elecció més concreta al pas següent"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentatge de paquets per instal·lar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selecció del grup de paquets"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selecció individual de paquets"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mida total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquet incorrecte"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nom: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versió: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Mida: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importància: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"No podeu seleccionar aquest paquet perquè no queda prou espai per instal·lar-"
-"lo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ara s'instal·laran els paquets següents"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ara s'eliminaran els paquets següents"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "No podeu seleccionar/desseleccionar aquest paquet"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Aquest paquet és obligatori; no es pot deseleccionar"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "No podeu desseleccionar aquest paquet; ja està instal·lat"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Aquest paquet s'ha d'actualitzar\n"
-"Esteu segur que voleu desseleccionar-lo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostra automàticament els paquets seleccionats"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instal·la"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Desa al disquet"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Desa la selecció de paquets"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Desinstal·la"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolliu els paquets que voleu instal·lar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "S'està instal·lant"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "S'està estimant"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Si us plau, espereu, s'està preparant la instal·lació"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquets"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "S'està instal·lant el paquet %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rebutja"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Canvieu el vostre CD-ROM!\n"
-"\n"
-"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i després\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel·la per no fer la instal·lació des d'aquest CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Voleu seguir igualment?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "S'ha produït un error en ordenar els paquets"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "S'ha produït un error en instal·lar els paquets"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Si us plau, llegiu atentament les clàusules següents. Si no esteu\n"
-"d'acord amb qualsevol d'elles, no esteu autoritzat a instal·lar\n"
-"els CD següents. Premeu 'Rebutja-ho' per continuar la instal·lació\n"
-"sense utilitzar aquests CD.\n"
-"\n"
-"\n"
-"Alguns dels components que s'inclouen en aquest CD no estan\n"
-"regits per la llicència GPL o acords semblants. Cada un d'aquests\n"
-"components es regeix per les clàusules i condicions de la seva\n"
-"pròpia llicència específica. Si us plau, llegiu atentament i\n"
-"accepteu aquestes llicències específiques abans d'utilitzar o\n"
-"redistribuir els components esmentats. En general, aquestes\n"
-"llicències impedeixen la transferència, duplicació (excepte amb\n"
-"la finalitat de fer-ne còpies de seguretat), redistribució,\n"
-"enginyeria inversa, deassemblatge, decompilació o modificació del\n"
-"component. Qualsevol violació de l'acord finalitzarà immediatament\n"
-"els vostres drets sobre la llicència específica. Tret que la\n"
-"llicència específica us en garanteixi els drets, normalment no\n"
-"podreu instal·lar els programes en més d'un sistema, ni adaptar-lo\n"
-"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
-"contacte directament amb el distribuïdor o editor del component.\n"
-"La transferència a terceres parts i la còpia d'aquests components,\n"
-"incloent la documentació, estan normalments prohibides.\n"
-"\n"
-"\n"
-"Tots els drets sobre els components del CD següent pretanyen als\n"
-"seus autors respectius i estan protegits per les lleis de\n"
-"propietat intel·lectual i de copyright aplicables als programes\n"
-"informàtics.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "S'ha produït un error"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Voleu reiniciar la xarxa"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acord de llicència"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introducció\n"
-"\n"
-"D'ara endavant, hom es referirà al sistema operatiu i als diferents\n"
-"components disponibles en la distribució Mandrake Linux com als\n"
-"\"Productes de programari\". Els Productes de programari inclouen,\n"
-"però no estan restringits a, el conjunt de programes, mètodes, regles\n"
-"i documentació relativa al sistema operatiu i els diferents\n"
-"components de la distribució Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Acord de llicència\n"
-"\n"
-"Si us plau, llegiu atentament aquest document. Aquest document és un\n"
-"acord de llicència entre la vostra persona i MandrakeSoft S.A., que\n"
-"s'aplica als Productes de programari. Pel fet d'instal·lar, duplicar\n"
-"o utilitzar els Productes de programari en qualsevol forma esteu\n"
-"acceptant explícitament, i expressant el vostre acord a, avenir-vos a\n"
-"les clàusules i condicions d'aquesta Llicència. Si no esteu d'acord\n"
-"amb qualsevol part de la Llicència, no esteu autoritzat a instal·lar,\n"
-"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
-"d'instal·lar, duplicar o utilitzar els Productes de programari en una\n"
-"forma que no s'adapti a les clàusules i condicions d'aquesta\n"
-"Llicència, és nul i finalitzarà els vostres drets sobre la mateixa.\n"
-"En finalitzar-se la Llicència, heu de destruir immediatament totes\n"
-"les còpies dels Productes de programari.\n"
-"\n"
-"\n"
-"2. Garantia limitada\n"
-"\n"
-"Els Productes de programari i documentació adjunta es subministren\n"
-"\"tal com són\", sense cap garantia, fins al punt permés per la llei.\n"
-"MandrakeSoft S.A. no serà, sota cap circumstància, i fins al punt\n"
-"permés per la llei, responsable de cap dany especial, incidental ni\n"
-"directe (incloent, sense limitar-se a, els danys per pèrdua de\n"
-"negocis, interrupció de negocis, pèrdues financeres, multes i costes\n"
-"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
-"qualsevol altre pèrdua d'importància) que resulti de l'ús o de la\n"
-"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
-"MandrakeSoft S.A. ha estat avisat de la possibilitat que\n"
-"s'esdevinguin aquests danys.\n"
-"\n"
-"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSIÓ O UTILITZACIÓ DE PROGRAMARI "
-"PROHIBIT EN ALGUNS PAÏSOS\n"
-"\n"
-"Fins al punt permés per la llei, MandrakeSoft S.A. o els seus\n"
-"distribuïdors no seran, sota cap circumstància, responsables de cap\n"
-"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
-"els danys per pèrdua de negocis, interrupció de negocis, pèrdues\n"
-"financeres, multes i costes judicials, o qualsevol altre dany que\n"
-"resultin d'un judici, o qualsevol altre pèrdua d'importància) que\n"
-"resulti de la possessió i utilització dels components de programari o\n"
-"de la seva descàrrega des d'un dels llocs de Mandrake Linux, que\n"
-"estiguin prohibides o restringides en alguns països per les lleis\n"
-"locals. Aquesta responsabilitat limitada s'aplica, però no està\n"
-"limitada a, els potents components criptogràfics inclosos als\n"
-"Productes de programari.\n"
-"\n"
-"\n"
-"3. la llicència GPL i llicències relacionades\n"
-"\n"
-"Els Productes de programari consisteixen en components creats per\n"
-"diferents persones o entitats. La majoria d'aquests components es\n"
-"regeixen per les clàusules i condicions de la Llicència General\n"
-"Pública de GNU, a la qual d'ara endavant hom s'hi referirà com a\n"
-"\"GPL\", o de llicències similars. la majoria d'aquestes llicències\n"
-"us permeten duplicar, adaptar o redistribuir els components que\n"
-"cobreixen. Si us plau, llegiu atentament les clàusules i condicions\n"
-"de l'acord de llicència de cada component abans d'utilitzar-lo.\n"
-"Qualsevol pregunta sobre la lllicència d'un component s'ha d'adreçar\n"
-"al seu autor i no a MandrakeSoft.\n"
-"Els programes desenvolupats per MandrakeSoft S.A. es regeixen per la\n"
-"llicència GPL.La documentació escrita per MandrakeSoft S.A. està regida per "
-"una\n"
-"llicència específica; consulteu la documentació per a més\n"
-"informació.\n"
-"\n"
-"\n"
-"4. Drets sobre la propietat intel·lectual\n"
-"\n"
-"Tots els drets sobre els components dels Productes de programari\n"
-"pertanyen als seus autors respectius i estan protegits per les lleis\n"
-"de propietat intel·lectual i de copyright aplicables als programes\n"
-"informàtics.\n"
-"MandrakeSoft S.A. es reserva els drets de modificar o adaptar els\n"
-"Productes de programari, totalment o parcialment, per tots els\n"
-"mitjans i amb totes les finalitats.\n"
-"\"Mandrake\", \"Mandrake Linux\" i els logotips associats son marques\n"
-"registrades de MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Lleis rectores \n"
-"\n"
-"Si qualsevol part d'aquest acord és declarat nul, il·legal o\n"
-"inaplicable per un tribunal, aquesta part s'exclourà del contracte.\n"
-"Seguiu obligat, però, per les altres seccions aplicables de\n"
-"l'acord.\n"
-"Les clàusules i condicions d'aquesta Llicència es regeixen per les\n"
-"lleis de França.\n"
-"Tots els litigis sobre les clàusules d'aquesta llicència es dirimiran\n"
-"preferiblement fora dels tribunals. Com a últim recurs, el litigi es\n"
-"portarà als tribunals competents de París, França.\n"
-"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
-"contacte amb MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclat"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aquesta és la llista completa de teclats disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Quin tipus d'instal·lació voleu?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instal·la/Actualitza"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Es tracta d'una instal·lació o d'una actualització?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomanada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualitza"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Desa la selecció de paquets"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port del ratolí"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sèrie a què està connectat el vostre ratolí."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulació dels botons"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulació del botó 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulació del botó 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "S'estan configurant les targetes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "S'està configurant l'IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "no hi ha particions disponibles"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "S'estan explorant les particions per trobar els punts de muntatge"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Escolliu els punts de muntatge"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"No puc llegir la vostra taula de particions, està massa malmesa per a mi :(\n"
-"Intentaré seguir, buidant les particions incorrectes (es perdran TOTES LES "
-"DADES!).\n"
-"L'altra solució és impedir al DrakX que modifiqui la taula de particions.\n"
-"(l'error és %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"El DiskDrake no ha pogut llegir correctament la taula de particions.\n"
-"Si continueu, és sota la vostra responsabilitat!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "No s'ha trobat cap partició arrel"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partició arrel"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Quina és la partició arrel (/) del vostre sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Us caldrà tornar a arrencar per tal que les modificacions de la taula de "
-"particions tinguin efecte"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Escolliu les particions que voleu formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Voleu comprovar els blocs incorrectes?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "S'estan formatant les particions"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "S'està creant i formatant el fitxer %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"No hi ha prou intercanvi per completar la instal·lació; si us plau, afegiu-ne"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "S'estan cercant els paquets disponibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "S'estan cercant els paquets a actualitzar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Al vostre sistema no li queda prou espai per a la instal·lació o "
-"actualització (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomanada (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaura des del disquet"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaura des del disquet"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Selecció del grup de paquets"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Desa al disquet"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Escolliu el paquet a instal·lar"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Espera"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si teniu tots els CD de la llista inferior, feu clic a D'acord.\n"
-"Si no teniu cap d'aquests CD, feu clic a Cancel·la.\n"
-"Si només falten alguns CD, desseleccioneu-los i feu clic a D'acord."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetat com \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "S'està preparant la instal·lació"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"S'està instal·lant el paquet %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Publica la configuració de la instal·lació "
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ara teniu la possibilitat de descarregar programari destinat al xifratge.\n"
-"\n"
-"AVÍS:\n"
-"Degut a diversos requeriments generals aplicables a aquest programari, i\n"
-"imposats per diverses jurisdiccions, el client i/o l'usuari final d'aquest\n"
-"programari s'ha(n) d'assegurar que les lleis de la(es) seva(es)\n"
-"jurisdicció(ns) li(els) permeten descarregar-lo, emmagatzemar-lo i/o\n"
-"utilitzar-lo.\n"
-"\n"
-"A mes, el client i/o l'usuari final ha(n) de tenir especialment en compte\n"
-"que no ha(n) d'infrigir les lleis de la(es) seva(es) jurisdicció(ns). Si\n"
-"el client i/o l'usuari final no respecta(en) les disposicions d'aquestes\n"
-"lleis, pot(den) ser severament sancionat(s).\n"
-"\n"
-"Mandrakesoft i els seus fabricants i/o proveïdors no seran en cap cas\n"
-"responsables de cap dany especial, indirecte o incidental (incloent,\n"
-"però sense limitar-se a, la pèrdua de beneficis, interrupció del negoci,\n"
-"pèrdua de dades comercials i altres pèrdues econòmiques, i eventuals\n"
-"responsabilitats i idemnitzacions que s'hagin de pagar per sentència\n"
-"judicial) derivat de l'ús, la possessió o la simple descàrrega d'aquest\n"
-"programari, al qual el client i/o l'usuari final pugui(n), eventualment,\n"
-"tenir accés després d'haver signat el present acord.\n"
-"\n"
-"Per a qualsevol consulta relativa a aquest acord, podeu adreçar-vos a \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"S'està contactant amb el mirror per obtenir la llista dels paquets "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolliu un mirror al qual aconseguir els paquets"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"S'està contactant amb el mirror per obtenir la llista dels paquets "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "En quina zona horària us trobeu?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "El rellotge del vostre ordinador està regulat a GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Cap impressora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "En teniu una altra?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resum"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Ratolí"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zona horària"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Targeta XDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Targeta de so"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Targeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Utilitza el NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contrasenya de 'root'"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sense contrasenya"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Aquesta contrasenya és massa senzilla (ha de tenir com a mínim %d caràcters)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticació"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticació"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS d'autenticació"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domini del NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Això és "
-"útil\n"
-"si no voleu instal·lar el SILO al sistema, o si un altre sistema operatiu\n"
-"elimina el SILO, o si el SILO no funciona amb la vostra configuració de\n"
-"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
-"serioses del sistema.\n"
-"\n"
-"Si voleu crear un disc d'arrencada per al vostre sistema, inseriu un disquet "
-"a la primera unitat i premeu \"D'acord\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primera unitat de disquet"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segona unitat de disquet"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omet"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Això és "
-"útil\n"
-"si no voleu instal·lar el LILO (o el grub) al sistema, o si un altre sistema "
-"operatiu\n"
-"elimina el LILO, o si el LILO no funciona amb la vostra configuració de\n"
-"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
-"serioses del sistema. Voleu crear un disc d'arrencada per al vostre "
-"sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolliu la unitat de disquet que voleu utilitzar per crear el disc "
-"d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "S'està creant el disc d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "S'està preparant el carregador d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Voleu utilitzar l'aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"S'ha produït un error en instal·lar l'aboot; \n"
-"voleu intentar igualment la instal·lació encara que això destrueixi la "
-"primera partició?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instal·la el LILO"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ha fallat la instal·lació del carregador d'arrencada. S'ha produït l'error "
-"següent:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Potser us caldrà canviar el dispositiu d'arrencada Open Firware per\n"
-" habilitar el carregador d'arencada. Si no veieu l'indicador del\n"
-" carregador d'arrencada en tornar a arrencar, premeu Command-Option-O-F\n"
-" en tornar a arrencar i introduïu:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Després, escriviu: shut-down\n"
-"En l'arrencada següent heu de veure l'indicador del carregador d'arrencada."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "S'està creant el diquet d'instal·lació automàtica"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos no s'han completat.\n"
-"\n"
-"Segur que voleu sortir ara?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitats! La instal·lació ha acabat.\n"
-"Traieu el suport d'arrencada i premeu Intro per tornar a arrencar.\n"
-"\n"
-"\n"
-"Trobareu la solució als problemes coneguts d'aquesta versió del\n"
-"Mandrake Linux a la fe d'errates que hi ha a \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"La informació sobre com configurar el vostre sistema està disponible a\n"
-"l'últim capítol d'instal·lació de la Guia Oficial de l'Usuari del\n"
-"Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Genera un disquet per a la instal·lació automàtica"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Si es desitja, la instal·lació automàtica es pot\n"
-"automatitzar completament, però en aquest cas\n"
-"prendrà el control del disc dur!!\n"
-"(això està pensat per a la instal·lació en una altra caixa).\n"
-"\n"
-"Potser preferireu repetir la instal·lació.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automàtica"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Repeteix"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Desa la selecció de paquets"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instal·lació del Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> entre elements  | <Espai> selecciona | <F12> pant. següent"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "El kdesu no hi és"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Trieu una acció"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avançat"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Si us plau, espereu"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informació"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandeix l'arbre"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Redueix l'arbre"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Commuta entre pla i ordenat per grups"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Elecció incorrecta, torneu-ho a intentar\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "La vostra elecció? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "La vostra elecció? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcions: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Voleu utilitzar l'aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "La vostra elecció? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Txec (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemany"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanyol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finès"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francès"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruec"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polonès"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rus"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Suec"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Teclat RU"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Teclat EU"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iranià"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeni (antic)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeni (màquina d'escriure)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeni (fonètic)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjanès (llatí)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armeni (fonètic)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Búlgar"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiler (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorús"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suís (disposició alemanya)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suís (disposició francesa)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Txec (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemany (sense tecles inoperatives)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danès"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (EU)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruec)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (EU)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonià"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgià (disposició \"russa\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgià (disposició \"llatina\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grec"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongarès"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelià"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelià (fonètic)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranià"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandès"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italià"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonès de 106 tecles"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Teclat coreà"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Espanyol sud-americà"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituà AZERTY (antic)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituà AZERTY (nou)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituà \"fila de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituà \"fonètic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Ubicació"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedoni"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandès"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polonès (disposició qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polonès (disposició qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portuguès"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadenc (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Eslovè"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovac (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovac (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjanès (ciríl·lic)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Taula"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclat tai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclat tai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradicional, model \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (modern, model \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraïnès"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Teclat EU (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"fila numèrica\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslau (llatí/ciríl·lic)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntatges circulars %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Elimineu primer els volums lògics\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rató de bola PS2 genèric"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botó"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "General"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "De bola"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "sèrie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generic 3 Button Mouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sèrie, tipus C7 antic)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botons"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botons"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "cap"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Cap ratolí"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Per activar el ratolí,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVEU LA BOLA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finès"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Següent ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Això és correcte?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connecta't a internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La manera més habitual de connectar amb ADSL és pppoe.\n"
-"Algunes connexions utilitzen pptp, unes poques utilitzen dhcp.\n"
-"Si no ho sabeu, escolliu 'utilitza pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "utilitza dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "utilitza pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "utilitza pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quin client dhcp voleu utilitzar?\n"
-"El predeterminat és dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
-"No puc configurar aquest tipus de connexió."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolliu la interfície de xarxa"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-"connectar-vos a Internet."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "no s'ha trobat cap targeta de xarxa"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "S'està configurant la xarxa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Si us plau, introduïu el nom del vostre ordinador central, si el sabeu.\n"
-"Alguns servidors DHCP necessiten que aquest nom funcioni.\n"
-"El nom ha de ser complet,\n"
-"com ara ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nom de l'ordinador central"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Assistent de configuració de xarxa"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Mòdem XDSI extern"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Targeta XDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Quin tipus de connexió XDSI teniu?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuració de l'XDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccioneu el vostre proveïdor.\n"
-" Si no és a la llista, seleccioneu No és a la llista"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocol d'arrencada"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resta del món"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resta del món \n"
-" cap canal D (línies llogades)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Quin protocol voleu utilitzar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Quin tipus de targeta teniu?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "No sé"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si teniu una targeta ISA, els valors de la pantalla següent han de ser "
-"correctes.\n"
-"\n"
-"Si teniu una targeta PCMCIA, us en cal saber l'irq i l'io.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Interromp"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continua"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Quina targeta XDSI teniu ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"He detectat una targeta PCI XDSI, però no en conec el tipus. Si us plau, "
-"seleccioneu una targeta PCI a la pantalla següent."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
-"pantalla següent"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sèrie al qual teniu connectat el mòdem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcions de marcatge"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nom de la connexió"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Número de telèfon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID d'entrada"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Basat en script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Basat en terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nom de domini"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segon servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Ara mateix esteu connectat a Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu connectar-vos a Internet o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Ara mateix no esteu connectat a Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Connecta"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Desconnecta"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configura una connexió per cable"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Connexió i configuració d'Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuració de xarxa"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Atès que esteu realitzant una instal·lació de xarxa, ja teniu la xarxa "
-"configurada.\n"
-"Feu clic a D'acord per conservar la configuració, o a Cancel·la per tornar a "
-"configurar la connexió a Internet i xarxa.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvingut a l'Auxiliar de configuració a xarxa\n"
-"\n"
-"Ara configurarem la connexió a Internet/xarxa.\n"
-"Si no voleu utilitzar la detecció automàtica, desactiveu el quadre de "
-"verificació.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolliu el perfil per configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Utilitza la detecció automàtica"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "S'estan detectant els dispositius..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Connexió normal per mòdem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectat al port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Connexió XDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "s'ha detectat %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Connexió LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectat a la interfície %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Connexió de cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Connexió de cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Connexió LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "s'han detectat una o diverses targetes Ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolliu l'eina que voleu utilitzar "
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Connexió a Internet compartida"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Voleu iniciar la connexió en arrencar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuració de xarxa"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"S'ha produït un problema en reiniciar la xarxa: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Felicitats, la configuració de xarxa i Internet ha finalitzat.\n"
-"\n"
-"Ara s'aplicarà la configuració al sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Després d'això, és recomanable que reinicieu l'entorn X per\n"
-"evitar problemes deguts al canvi de nom de l'ordinador central."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATENCIÓ: Aquest dispositiu ja es va configurar per connectar-se a Internet.\n"
-"Només cal que accepteu mantenir-lo configurat.\n"
-"Si modifiqueu els camps inferiors, sobreescriureu aquesta configuració."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Si us plau, introduïu la configuració IP d'aquest ordinador.\n"
-"S'ha d'introduir cada element com a una adreça IP amb notació decimal amb\n"
-"punts (per exemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "S'està configurant el dispositiu de xarxa %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (programa de control %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adreça IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Submàscara de la xarxa"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automàtic"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adreça IP ha d'estar amb el format 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Si us plau, introduïu el nom del vostre ordinador central.\n"
-"Aquest nom ha de ser complet, com ara\n"
-"``mybox.mylab.myco.com''.\n"
-"També podeu introduir l'adreça IP de la passarel·la, si en teniu una"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositiu de la passarel·la"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuració dels proxys"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "El proxy ha de ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "El proxy ha de ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voleu intentar connectar-vos a Internet ara?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "S'està comprovant la vostra conexió..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ara, el sistema està connectat a Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Per raons de seguretat, ara es desconnectarà."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"No sembla que el sistema estigui connectat a Internet.\n"
-"Intenteu tornar a configurar la connexió."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuració de la connexió"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Si us plau, ompliu o marqueu el camp inferior"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Targeta IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Targeta de memòria (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Targeta d'E/S"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Targeta d'E/S_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Targeta d'E/S_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "El vostre telèfon particular"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nom del proveïdor (p.ex. proveidor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Número de telèfon del proveïdor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveïdor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveïdor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolliu el vostre teclat"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Mode de marcatge"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipus de connexió: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipus de connexió: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Entrada del compte (nom d'usuari)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Contrasenya del compte"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ha fallat el muntatge: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Aquesta plataforma no suporta particions esteses"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hi ha un forat a la vostra taula de particions, però no puc utilitzar-lo.\n"
-"L'única solució és moure les particions primàries per fer que el forat quedi "
-"contigu a les particions ampliades"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ha fallat la restauració del fitxer %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "S'ha produït un error en escriure al fitxer %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Alguna cosa no va bé en la vostra unitat. \n"
-"Ha fallat una comprovació de la integritat de les dades. \n"
-"Això vol dir que qualsevol cosa que s'escrigui al disc acabarà feta malbé"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ha de tenir"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "molt bonic"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bonic"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "potser"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remot"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora de xarxa (TCP/sòcol)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de la impressora"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "S'ha produït un error en escriure al fitxer %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(mòdul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP del servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Predeterminat)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Com està connectada la impressora?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Amb un servidor CUPS remot, aquí no us cal configurar cap\n"
-"impressora; les impressores es detectaran automàticament.\n"
-"En cas de dubte, seleccioneu \"Servidor CUPS remot\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'adreça IP ha d'estar amb el format 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "El número de port ha de ser numèric"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "S'estan detectant els dispositius..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Ports de comprovació"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Utilitza la detecció automàtica"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "s'ha detectat %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sèrie al qual teniu connectat el mòdem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuració"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "S'està instal·lant el paquet %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "S'està instal·lant el paquet %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcions de la impressora lpd remota"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Per poder utilitzar una cua d'impressió lpd remota, necessiteu proporcionar\n"
-"el nom de l'ordinador central del servidor de la impressora i el nom de la\n"
-"cua d'aquest servidor on s'hi han de situar les tasques."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
-"l'ordinador central SMB (tingueu en compte que pot ser diferent del seu nom\n"
-"TCP/IP) i possiblement l'adreça IP del servidor d'impressió, així com el "
-"nom\n"
-"de compartició de la impressora a què voleu accedir i el nom d'usuari,\n"
-"contrasenya i informació de grup si són necessaris."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Ordinador central del servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nom de compartició"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grup de treball"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcions de la impressora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
-"servidor d'impressió NetWare (tingueu en compte que pot ser diferent del "
-"nom\n"
-"TCP/IP del seu ordinador central), així com el nom de la cua d'impressió de\n"
-"la impressora a què voleu accedir i el nom d'usuari i contrasenya si són\n"
-"necessaris."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de la impressora"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nom de la cua d'impressió"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcions de la impressora de sòcol"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Per imprimir a una impressora de sòcol, heu d'indicar el nom de l'ordinador\n"
-"central de la impressora i, opcionalment, el número de port."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nom de l'ordinador central de la impressora"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nom de l'ordinador central de la impressora"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nom de la impressora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descripció"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ubicació"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Això és correcte?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Quin tipus d'impressora teniu?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuració del mòdem"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Voleu comprovar la impressió?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Ports de comprovació"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Sí, imprimeix ambdues pàgines de prova"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Eines estàndard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(es) pàgina(es) de prova s'ha(n) enviat al procés d'impressió.\n"
-"Degut a això, pot passar un cert temps abans no comenci la impressió.\n"
-"Estat de la impressió:\n"
-"%s\n"
-"\n"
-"Funciona correctament?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(es) pàgina(es) de prova s'ha(n) enviat al procés d'impressió.\n"
-"Degut a això, pot passar un cert temps abans no comenci la impressió.\n"
-"Funciona correctament?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Tanca"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "S'està desactivant la xarxa"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "S'està desactivant la xarxa"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcions de la impressora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nom de la impressora només pot constar de lletres, números i el caràcter "
-"de subratllat"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "S'està comprovant la vostra conexió..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configura la xarxa"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "El monitor no està configurat"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "S'està configurant la xarxa"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alt"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoic"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "S'està instal·lant el paquet %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcions de la impressora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Voleu configurar una impressora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aquestes són les cues d'impressió següents.\n"
-"Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aquestes són les cues d'impressió següents.\n"
-"Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configura la xarxa"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuració del mòdem"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Connexió a Internet compartida"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voleu reiniciar la xarxa"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "S'està llegint la base de dades de controladors CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuració dels proxys"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "El proxy ha de ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "El número de port ha de ser numèric"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "El proxy ha de ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Entrada automàtica"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Contrasenya"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Sense contrasenya"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No es pot afegir una partició a un RAID _formatat_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "No es pot escriure al fitxer %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "l'mkraid ha fallit"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "l'mkraid ha fallit (potser manquen eines del RAID?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hi ha prou particions per al nivell RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un programador d'ordres periòdiques."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
-"mitjançant el registre del sistema.\n"
-"També es pot utilitzar per apagar l'ordinador quan queda poca bateria."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
-"especificar en executar 'at', i executa les ordres 'batch' quan la\n"
-"mitjana de càrrega és prou baixa."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"El cron és un programa UNIX estàndard que executa programes determinats\n"
-"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
-"característiques al cron bàsic, incloent seguretat millorada i opcions\n"
-"de configuració més potents."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"El GPM afegeix suport de ratolí a aplicacions Linux basades en text, com ara "
-"el Midnight Commander. També permet operacions de tallar i enganxar amb el "
-"ratolí, i inclou suport de menús desplegables a la consola."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"L'Apache és un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-"HTML i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El procés superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
-"altres serveis d'Internet a mesura que es van necessitant. És el "
-"responsable\n"
-"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
-"s'inhabilita l'inetd s'inhabiliten tots els serveis de què és responsable."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
-"a /etc/sysconfig/keyboard. Això es pot seleccionar mitjançant la utilitat\n"
-"kbdconfig.\n"
-"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"L'lpd és el procés d'impressió necessari per a que l'lpr funcioni\n"
-"correctament. Bàsicament, es tracta d'un servidor que assigna les\n"
-"tasques d'impressió a la(es) impressora(es)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) és un servidor de noms de domini (DNS) que s'utiilitza\n"
-"per convertir noms d'ordinadors centrals en adreces IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
-"de xarxa (NFS), SMB (gestor de xarxes d'àrea local/Windows) i NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva totes les interfícies de xarxa configurades per\n"
-"iniciar-se durant l'arrencada."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"L'NFS és un popular protocol de compartició de fitxers en xarxes TCP/IP.\n"
-"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
-"configura mitjançant el fitxer /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"L'NFS és un popular protocol de compartició de fitxers en xarxes TCP/IP\n"
-"Aquest servei proporciona la funcionalitat de blocatge del fitxer NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"El suport PCMCIA serveix normalment per suportar coses com ara l'ethernet\n"
-"i els mòdems en portàtils. No s'iniciarà tret que es configuri, de manera\n"
-"que no hi ha problema per instal·lar-lo en ordinadors que no el necessiten."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El portmapper gestiona les connexions RPC, que són utilitzades per\n"
-"protocols com ara l'NFS i l'NIS. El servidor portmap s'ha d'estar\n"
-"executant en ordinadors que actuen com a servidors per a protocols que\n"
-"utilitzen el mecanisme RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"El Postfix és un agent de transport de correu, que és el programa que\n"
-"passa el correu d'un ordinador a un altre."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Desa i recupera el generador d'entropia del sistema per a\n"
-"la generació de nombres aleatoris d'una més alta qualitat."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El procés 'routed' permet que la taula d'encaminadors IP automàtics\n"
-"s'actualitzi mitjançant el protocol RIP. Mentre que el RIP s'utilitza\n"
-"àmpliament en xarxes petites, les xarxes complexes necessiten protocols\n"
-"d'encaminament més complexs."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
-"mètrics de funcionament de qualsevol ordinador de la mateixa."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
-"qui està connectat en altres ordinadors de la mateixa."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
-"de tots els usuaris que están connectats a un ordinador que està\n"
-"executant el procés rwho (similar al finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Executa el sistema X-Window en iniciar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"El syslog és el sistema que utilitzen molts processos per registrar\n"
-"missatges en diversos fitxers de registre del sistema. És aconsellable\n"
-"executar-lo sempre."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia i atura l'X Font Server en arrencar i apagar l'ordinador."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolliu els serveis que s'han d'iniciar automàticament durant l'arrencada"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mode de sistema"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcions de la impressora lpd remota"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Servidor, base de dades"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositiu"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "s'està executant"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "aturat"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serveis i dimonis"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Malauradament no hi ha més informació\n"
-"sobre aquest servei."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "En arrencar"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Estat:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resta del món"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Accés a Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimèdia - Gràfics"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolupament"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Control Center"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interfície de la xarxa"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Ordinador central del servidor SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jocs"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "obligatori"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "S'està instal·lant el paquet %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"No puc llegir la vostra taula de particions, està massa malmesa per a mi :(\n"
-"Intentaré seguir buidant les particions incorrectes"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Error"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Publica la configuració de la instal·lació "
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Felicitats!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instal·la"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Afegeix un usuari"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "S'està formatant el fitxer de loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selecció del grup de paquets"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Si us plau, escolliu els paquets que voleu instal·lar"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Elimina la cua"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Elimina el Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Sense contrasenya"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Connexió LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Si us plau, escolliu els paquets que voleu instal·lar"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Xarxa:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Si us plau, escolliu els paquets que voleu instal·lar"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Voleu utilitzar l'optimització del disc dur?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Voleu utilitzar l'optimització del disc dur?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Espera"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "De bola"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "De bola"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opcions del mòdul:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Si us plau, escolliu els paquets que voleu instal·lar"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "Xarxa:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Si us plau, escolliu els paquets que voleu instal·lar"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Sistemes de fitxers"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcions"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Si us plau, seleccioneu el port sèrie al qual teniu connectat el mòdem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaura des del disquet"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Altres"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instal·la el sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalitzada"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Ajuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Estat:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Text"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Paquets a instal·lar"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Desa al fitxer"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Si us plau, escolliu els paquets que voleu instal·lar"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Sistemes de fitxers"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Ha fallat la instal·lació del %s. S'ha produït l'error següent:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "no s'ha trobat %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Fet"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formata el disquet"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "S'està preparant la instal·lació"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "limita"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "limita"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formata les particions"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "S'estan desinstal·lant els RPM"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punt de muntatge"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Escolliu les particions que voleu formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oficina"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Interromp"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impressora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instal·la el sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Seleccioneu el fitxer"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impressora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Missatge d'inicialització"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instal·la"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Surt de la instal·lació"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Connexió a Internet compartida"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "La connexió a Internet compartida està habilitada"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara està habilitada.\n"
-"\n"
-"Què voleu fer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "inhabilita"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "deixa-ho córrer"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "torna a configurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "S'estan inhabilitant els servidors..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ara, la compartició de la connexió a Internet està inhabilitada."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "La connexió a Internet compartida està inhabilitada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara està inhabilitada.\n"
-"\n"
-"Què voleu fer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "habilita"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "S'estan habilitant els servidors..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ara, la connexió compartida a Internet està habilitada."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ara configurareu l'ordinador per tal que comparteixi la connexió a "
-"Internet.\n"
-"Amb aquesta característica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexió a Internet d'aquest ordinador.\n"
-"\n"
-"Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfície %s (utilitzant el mòdul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfície %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
-"executeu l'eina de configuració de maquinari."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfície de la xarxa"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Només teniu un adaptador de xarxa configurat al sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Ara configuraré la vostra xarxa d'àrea local amb aquest adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Si us plau, escolliu l'adaptador de xarxa que es connectarà\n"
-"a la vostra xarxa d'àrea local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "El monitor no està configurat"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuració del mòdem"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"S'ha trobat un conflicte potencial d'adreça LAN en la configuració actual de "
-"%s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Atenció! S'ha detectat una configuració existent del sistema de tallafocs. "
-"Potser us caldrà fer algun ajustament manual després de la instal·lació."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "S'està configurant..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"S'estan configurant les seqüències, instal·lant el programari, iniciant els "
-"servidors..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Hi ha hagut problemes en instal·lar el paquet %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Ja està tot configurat.\n"
-"Ara podeu compartir la connexió a Internet amb altres ordinadors de la "
-"vostra xarxa d'àrea local utilitzant la configuració automàtica de xarxa "
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuració ja s'ha realitzat, però ara està inhabilitada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuració ja s'ha realitzat i ara està habilitada."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No s'ha configurat mai cap connexió compartida a Internet."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuració de la compartició de la connexió a Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvingut a la utilitat de compartició de la connexió a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a Configura per executar l'auxiliar de configuració."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuració de xarxa (%d adaptadors)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Suprimeix el perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a suprimir:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Perfil nou..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nom de l'ordinador central: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Accés a Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipus:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Passarel·la:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Intefície:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estat:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configura l'accés a Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Programa de control"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfície"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Estat:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configura la xarxa d'àrea local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplica"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Si us plau, espereu... s'està aplicant la configuració"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Connectat"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Sense connexió"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Connecta..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desconnecta..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocol d'arrencada"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciat en l'arrencada"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Actiu"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Actiu"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuració de la connexió a Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuració de la connexió a Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipus de connexió: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Paràmetres"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Passarel·la"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Targeta Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "S'està establint el nivell de seguretat"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Control Center"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolliu l'eina que voleu utilitzar "
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadenc (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandès"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "sèrie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "sintaxi: keyboarddrake [--expert] [teclat]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voleu que la tecla Enrere efectuï un Suprimeix en la consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Canvieu el CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Si us plau, inseriu el CD-ROM d'instal·lació a la unitat i després\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel·la per evitar la instal·lació en directe."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "No es pot iniciar l'actualització en directe !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Mostr-ho només per a avui"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fitxer/_Nou"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fitxer/_Obre"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fitxer/_Desa"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fitxer/_Anomena i desa"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fitxer/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcions"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcions/Prova"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ajuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Quant a..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "missatges"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "cerca"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Eina per veure els registres"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Paràmetres"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "que coincideixin amb"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "però que no coincideixein amb"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Escolliu el fitxer"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendari"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contingut del fitxer"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "si us plau, espereu, s'està analitzant el fitxer: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "ombra"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interessant"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "s'està formatant"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuració"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Anomena i desa..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no s'ha trobat cap serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Voleu emular el tercer botó?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Seleccioneu una targeta gràfica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositiu d'arrencada"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuració del sistema de tallafocs"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuració del sistema de tallafocs"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Sistema de tallafocs\n"
-"\n"
-"Ja heu configurat un tallafocs.\n"
-"Feu clic a Configura per canviar o eliminar el tallafoc"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Sistema de tallafocs\n"
-"\n"
-"Feu clic a Configura per configurar un tallafocs estàndard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolliu el vostre idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Tipus d'instal·lació"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecció del disc dur"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configura el ratolí"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolliu el vostre teclat"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguretat"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemes de fitxers"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formata les particions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paquets a instal·lar"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instal·la el sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Afegeix un usuari"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configura la xarxa"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configura els serveis"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instal·la el LILO"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crea un disc d'arrencada"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configura l'X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instal·la el sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Surt de la instal·lació"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configurador del tinyfirewall\n"
-"\n"
-"Amb això es configura un tallafocs personal per a aquest ordinador Linux "
-"Mandrake.\n"
-"Per a una potent solució de tallafocs dedicada, consulteu si us plau la "
-"distribució especialitzada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ara us farem preguntes sobre els serveis a què voleu autoritzar que\n"
-"Internet us connecti. Si us plau, penseu-hi a fons perquè la seguretat\n"
-"del vostre ordinador és important.\n"
-"\n"
-"Si us plau, si un moment donat no esteu utilitzant algun d'aquests serveis,\n"
-"desactiveu-ne el tallafocs. Podeu canviar aquesta configuració sempre que\n"
-"vulgueu tornant a executar aquesta aplicació!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de web en aquest ordinador que necessiteu que\n"
-"pugui veure tothom a Internet? Si esteu executant un servidor de web a què\n"
-"només ha d'accedir aquest ordinador, aquí podeu respondre tranquil·lament "
-"NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de noms en aquest ordinador? Si no n'heu\n"
-"configurat cap per proporcionar la IP i la informació de zona a tothom a\n"
-"Internet, si us plau responeu NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voleu autoritzar les connexions Secure Shell (ssh) d'entrada? Es tracta\n"
-"d'una substitució del Telnet que podeu utilitzar per entrar. Si ara esteu\n"
-"utilitzant el Telnet, passeu-vos a l'ssh sense cap mena de dubte; el\n"
-"Telnet no està xifrat, de manera que us poden robar la contrasenya si\n"
-"l'utilitzeu, mentre que l'ssh està xifrat i no permet cap mena d'intercepció."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voleu autoritzar les connexions Telnet d'entrada?\n"
-"Això és tremendament insegur, com hem dit a la pantalla anterior. Us\n"
-"recomanem vivament que respongueu No aquí i que utilitzeu l'ssh en comptes\n"
-"del Telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Esteu executant un servidor d'FTP que necessiteu que sigui accessible a\n"
-"Internet? Si és així, us recomanen vivament que només l'utilitzeu per a\n"
-"transferències anònimes, ja que qualsevol contrasenya que s'envia per FTP\n"
-"pot ser robada, atès que l'FTP no utilitza xifratge per a la transferència\n"
-"de contrasenyes.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de correu? Si esteu enviant els missatges\n"
-"a través del pine, el mutt o qualsevol altre client de correu basat en\n"
-"text, probablement és així. En cas contrari, desactiveu-ne el tallafocs.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor POP o IMAP? Això s'utilitzaria\n"
-"per allotjar comptes de correu dels usuaris, no basats en web,\n"
-"mitjançant aquest ordinador.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Sembla que esteu utilitzant un nucli 2.2. Si l'ordinador de\n"
-"casa o de l'oficina estableix automàticament la IP de la vostra\n"
-"xarxa (assignació dinàmica), us cal autoritzar això. És aquest el cas?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"El vostre ordinador està sincronitzat pel que fa al temps amb un altre?\n"
-"Normalment, això ho utilitzen organitzacions Unix/Linux mitjanes-grans\n"
-"per sincronitzar el temps de les entrades i coses així. Si no sou una part\n"
-"d'una oficina gran i no heu sentit parlar d'això, probablement no us trobeu\n"
-"en aquest cas."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"La configuració està completa. Podem desar aquests canvis al disc?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "No es pot obrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "No s'ha pogut obrir %s per escriure-hi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configuració del sistema de tallafocs"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Si us plau, espereu, s'està preparant la instal·lació"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordinador de xarxa (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, Servidor SMB, Servidor intermediari, Servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estació de treball GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Eines per al Palm Pilot o per al Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estació de treball"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Tallafoc/Encaminador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programes d'ofimàtica: processadors de textos (kword, abiword), gestors de "
-"fulls de càlcul (kspread, gnumeric), visualitzadors pdf, etc."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Eines d'àudio: reproductors d'mp3 o midi, mescladors, etc."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llibres i Com es fa... sobre el Linux i el programari lliure"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estació de treball KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimèdia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunt d'eines per al correu, notícies, web, transferència de fitxers i xat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, base de dades"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Eines per facilitar la configuració de l'ordinador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimèdia - So"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitats"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentació"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Eines de consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estació d'Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estació multimèdia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Més escriptoris gràfics (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "Entorn d'escriptori K, l'entorn gràfic bàsic que inclou diverses eines"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorn gràfic"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Eines per crear i gravar CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estació de treball Office"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programes gràfics com ara el Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Biblioteques de desenvolupament C i C++, programes i fitxers inclosos"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor d'ordinador de xarxa"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correu/Groupware/Notícies"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estació de jocs"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductors i editors de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimèdia - Gràfics"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programes d'entreteniment: acció, jocs de taula, estratègia, etc."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunt d'eines per llegir i enviar correu i notícies (pine, mutt, tin...) i "
-"per navegar pel Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arxivament, emuladors, monitorització"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Comptabilitat personal"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorn gràfic amb un conjunt d'aplicacions i eines d'escriptori fàcil "
-"d'utilitzar"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients per a diferents protocols, incloent l'ssh"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Accés a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programes de reproducció/edició de so i vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Altres escriptoris gràfics"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editors, intèrprets d'ordres, eines de fitxer, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programes per gestionar els vostres comptes, com ara el gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestió d'informació personal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimèdia - Gravació de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estació científica de treball"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Interromp"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Cap"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Escolliu l'usuari per omissió:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Impressora remota"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Ara podeu proporcionar les seves opcions per al mòdul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ha fallat el muntatge"
-
-#~ msgid "Low"
-#~ msgstr "Baix"
-
-#~ msgid "Medium"
-#~ msgstr "Mitjà"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Poques millores per a aquest nivell de seguretat; la principal és que hi "
-#~ "ha\n"
-#~ "més avisos i comprovacions de seguretat."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimèdia"
-
-#~ msgid "Boot mode"
-#~ msgstr "Mode d'arrencada"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Expert"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "El GNU/Linux gestiona l'hora en GMT (Hora de Greenwich) i la\n"
-#~ "tradueix a l'hora local segons la zona horària seleccionada."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Connecta't a Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Desconnecta't d'Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configura la connexió de xarxa (LAN o Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "A quin disc us voleu desplaçar?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Si us plau, escolliu els paquets que voleu instal·lar"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informació"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Estació de treball GNOME"
-
-#~ msgid "authentification"
-#~ msgstr "autenticació"
-
-#~ msgid "user"
-#~ msgstr "usuari"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server.  It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "L'Apache és un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-#~ "HTML i CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) és un servidor de noms de domini (DNS) que s'utiilitza\n"
-#~ "per convertir noms d'ordinadors centrals en adreces IP."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Surt"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Muntatge automàtic del suport extraïble"
-
-#~ msgid "Active"
-#~ msgstr "Actiu"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "No"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "S'ha detectat una impressora, model \"%s\", a"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Dispositiu de la impressora local"
-
-#~ msgid "Printer Device"
-#~ msgstr "Dispositiu d'impressora"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Servidor CUPS remot"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Servidor CUPS remot"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mode de sistema"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Altres"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Si us plau, feu clic a una partició "
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipus: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Configura l'X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Dispositiu d'impressora"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Cancel·la"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "D'acord"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Tanca"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "S'està comprovant la vostra conexió..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "S'està tancant la connexió..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "La connexió no està tancada.\n"
-#~ "Intenteu fer-ho manualment executant\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "a root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Ara, el sistema està desconnectat."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Escolliu la mida que voleu instal·lar"
-
-#~ msgid "Total size: "
-#~ msgstr "Mida total: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Si us plau, espereu, "
-
-#~ msgid "Total time "
-#~ msgstr "Temps total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Voleu utilitzar la configuració existent per a X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "A quin dispositiu està connectada la vostra impressora?\n"
-#~ "(tingueu en compte que /dev/lp0 equival a LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Compte, l'adaptador de xarxa ja està configurat. El tornaré a configurar."
-
-#~ msgid "New"
-#~ msgstr "Nou"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Elimina"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Si us plau, feu clic a una partició "
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambigüitat (%s), sigueu més precís\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (predeterminat %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "La vostra elecció? (predeterminat %s  introduïu `cap' per a cap) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "no es pot obrir /etc/sysconfig/autologin per a lectura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Voleu reiniciar la xarxa"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Hi esteu d'acord?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ara reiniciaré el dispositiu de xarxa:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ara reiniciaré el dispositiu de xarxa %s. Hi esteu d'acord?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tret que sapigueu expressament que s'ha d'indicar una altra cosa, "
-#~ "l'elecció\n"
-#~ "habitual és \"/dev/hda\" (el disc IDE mestre primari) o bé \"/dev/sda\"\n"
-#~ "(el primer disc SCSI)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipus de connexió: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolliu l'usuari per omissió:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Si us plau, comproveu el ratolí."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Escolliu l'idioma que voleu utilitzar per a la instal·lació i per a l'ús "
-#~ "del sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Heu d'acceptar els termes de la llicència de més amunt per poder "
-#~ "continuar la instal·lació.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si us plau, feu clic a \"Accepto\" si hi esteu d'acord.\n"
-#~ "\n"
-#~ "\n"
-#~ "Feu clic a \"No accpeto\" si no hi esteu d'acord. La instal·lació "
-#~ "finalitzarà sense modificar la instal·lació actual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Escolliu el vostre tipus de teclat de la llista inferior"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Si desitgeu que altres idiomes (a més del que vau triar en\n"
-#~ "iniciar la instal·lació) estiguin disponibles després de la "
-#~ "instal·lació,\n"
-#~ "escolliu-los de la llista de més amunt. Si els voleu seleccionar tots,\n"
-#~ "només cal que seleccioneu \"Tots\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Personalitzada: Si esteu familiaritzat amb el Linux, podreu\n"
-#~ "triar l'ús del sistema instal·lat entre Normal, Desenvolupament o\n"
-#~ "Servidor. Trieu \"Normal\" per a una instal·lació per a un ús\n"
-#~ "general del vostre ordinador, \"Desenvolupament\" si utilitzareu\n"
-#~ "l'ordinador principalment per a desenvolupament de programari,\n"
-#~ "o \"Servidor\" si voleu instal·lar un servidor convencional (per\n"
-#~ "a correu, impressions...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Per a experts: Si domineu el GNU/Linux i voleu realitzar una\n"
-#~ "instal·lació totalment personalitzada, aquest és el vostre\n"
-#~ "tipus d'instal·lació. Podreu seleccionar l'ús del vostre sistema\n"
-#~ "com a \"Personalitzada\"."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ara heu de decidir com utilitzareu l'ordinador. Les opcions són:\n"
-#~ "\n"
-#~ "* Estació de treball: l'elecció ideal si penseu utilitzar l'ordinador "
-#~ "bàsicament per a l'ús quotidià, a la feina o\n"
-#~ "  a casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolupament: si penseu utilitzar l'ordinador bàsicament per a "
-#~ "desenvolupament de programari, aquesta és l'elecció ideal.\n"
-#~ "  Tindreu instal·lada una completa col·lecció de programari per poder "
-#~ "compilar, depurar i formatar codi font,\n"
-#~ "  o crear paquets de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: si penseu utilitzar l'ordinador com a servidor, aquesta és "
-#~ "l'elecció ideal, ja sigui un servidor de fitxers (NFS o\n"
-#~ "  SMB), un servidor d'impressió (tipus Unix o Microsoft Windows), un "
-#~ "servidor d'autenticació (NIS), un servidor\n"
-#~ "  de bases de dades, etc. En canvi, no espereu que se us instal·lin coses "
-#~ "com ara el KDE, el GNOME, etc.)"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ara podeu seleccionar el grup de paquets que voleu instal·lar o "
-#~ "actualitzar.\n"
-#~ "\n"
-#~ "\n"
-#~ "El DrakX comprovarà si teniu prou espai per instal·lar-los tots i, si no, "
-#~ "us\n"
-#~ "ho avisarà. Si voleu seguir igualment, continuarà amb la instal·lació de "
-#~ "tots\n"
-#~ "els grups seleccionats però no n'instal·larà alguns de menys interès. Al "
-#~ "final\n"
-#~ "de la llista podeu seleccionar l'opció \"Selecció individual de paquets"
-#~ "\", i\n"
-#~ "en aquest cas haureu de navegar per més de 1.000 paquets..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ara podeu triar individualment tots els paquets que voleu instal·lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Podeu expandir o reduir l'arbre fent clic a les opcions del racó esquerre "
-#~ "de la finestra de paquets.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si preferiu veure els paquets ordenats alfabèticament, feu clic a la "
-#~ "icona\n"
-#~ "\"Commuta entre ordenació plana i per grups\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no voleu ser avisat pel que fa a les dependències, feu clic a "
-#~ "\"Dependències\n"
-#~ "automàtiques\". Si ho feu, tingueu en compte que el fet de "
-#~ "desseleccionar\n"
-#~ "un paquet pot causar la desselecció d'altres paquets que en depenen, i "
-#~ "no\n"
-#~ "us n'assabentareu."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Si teniu tots els CD de la llista superior, feu clic a D'acord.\n"
-#~ "Si no teniu cap d'aquests CD, feu clic a Cancel·la.\n"
-#~ "Si només falten alguns CD, desseleccioneu-los i feu clic a D'acord."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Si voleu connectar l'ordinador a Internet o a una xarxa local, "
-#~ "seleccioneu\n"
-#~ "l'opció corresponent, però abans recordeu engegar el dispositiu per tal "
-#~ "que\n"
-#~ "el DrakX el detecti automàticament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no teniu connexió a Internet ni a cap xarxa local, escolliu "
-#~ "\"Inhabilita el servei de xarxa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu configurar la xarxa més endavant, després de la instal·lació, o "
-#~ "si\n"
-#~ "heu acabat la configuració de la connexió de xarxa, trieu \"Fet\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "No s'ha detectat cap mòdem. Si us plau, seleccioneu el port sèrie on està "
-#~ "connectat.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per a la vostra informació, el primer port sèrie (anomenat \"COM1\" en "
-#~ "Microsoft Windows) s'anomena \"ttyS0\" en Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ara podeu introduir les opcions de marcatge. Si no sabeu què heu "
-#~ "d'introduir,\n"
-#~ "o si no n'esteu segur, podreu aconseguir la informació necessària del "
-#~ "vostre\n"
-#~ "proveïdor d'Internet. Si no introduïu aquí la informació del DNS "
-#~ "(servidor de\n"
-#~ "noms), aquesta informació s'obtindrà del proveïdor en el moment de "
-#~ "connectar."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Si el mòdem que teniu és extern, engegueu-lo per tal que el DrakX el "
-#~ "detecti automàticament."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Si us plau, engegueu el mòdem i trieu-ne el correcte."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Si no esteu segur de si la informació de més amunt és correcta, si no "
-#~ "sabeu\n"
-#~ "què introduir o si no n'esteu segur, podreu aconseguir la informació\n"
-#~ "necessària del vostre proveïdor d'Internet. Si no introduïu aquí la\n"
-#~ "informació del DNS (servidor de noms), aquesta informació s'obtindrà del\n"
-#~ "proveïdor en el moment de connectar."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central. Si no esteu "
-#~ "segur del que hi\n"
-#~ "heu d'introduir, el vostre proveïdor us en donarà la informació correcta."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ara podeu configurar el voste dispositiu de xarxa.\n"
-#~ "\n"
-#~ "   * Adreça IP: si no la sabeu, o no n'esteu segur, pregunteu-la a "
-#~ "l'administrador de la xarxa.\n"
-#~ "     No heu d'introduir cap adreça IP si més avall seleccioneu l'opció "
-#~ "\"IP automàtica\".\n"
-#~ "\n"
-#~ "  * Màscara de la xarxa: Normalment, \"255.255.255.0\" és una bona "
-#~ "elecció. Si no n'esteu segur, consulteu-ho a l'administrador de la "
-#~ "xarxa.\n"
-#~ "\n"
-#~ "  * IP automàtica: si la vostra xarxa utilitza els protocols BOOTP o "
-#~ "DHCP,\n"
-#~ "seleccioneu aquesta opció. Si es selecciona, no cal cap valor per a "
-#~ "\"Adreça IP\". Si no n'esteu segur, consulteu-ho a l'administrador de la "
-#~ "xarxa."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central, si cal. Si no "
-#~ "el\n"
-#~ "sabeu, o no esteu segur de què heu d'introduir, consulteu a "
-#~ "l'administrador de la xarxa."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central, si cal. Si no\n"
-#~ "el sabeu, o si esteu segur de què introduir, deixeu-ho en blanc."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ara podeu introduir les opcions de marcatge. Si no esteu segur del que "
-#~ "hi\n"
-#~ "heu d'introduir, el vostre proveïdor us en donarà la informació correcta."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Si teniu previst utilitzar proxys, configureu-los ara. Si no sabeu si\n"
-#~ "n'utilitzareu, consulteu-ho a l'administrador de la xarxa o al vostre\n"
-#~ "proveïdor."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Podeu instal·lar el paquet criptogràfic si la vostra connexió a Internet\n"
-#~ "s'ha configurat correctament. Escolliu primer una rèpilca des de la qual\n"
-#~ "vulgueu descarregar paquets i després seleccioneu els paquets a "
-#~ "instal·lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tingueu en compte que heu de seleccionar la rèplica i els paquets\n"
-#~ "criptogràfics segons la vostra legislació."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ara podeu seleccionar la zona horària segons el lloc on viviu."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Podeu configurar una impressora local (connectada al vostre ordinador) o\n"
-#~ "remota (accessible mitjançant una xarxa Unix, Netware o Microsoft "
-#~ "Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Si voleu imprimir, trieu un sistema de impressió entre CUPS i LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "El CUPS és un nou sistema d'impressió, potent i flexible, per a sistemes "
-#~ "Unix\n"
-#~ "(CUPS significa \"Common Unix Printing System\"). És el sistema "
-#~ "d'impressió\n"
-#~ "per defecte en Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'LPR és l'antic sistema d'impressió utilitzat en distribucions anteriors "
-#~ "de\n"
-#~ "Mandrake Linux distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no teniu impressora, feu clic a \"Cap\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "El GNU/Linux pot treballar amb molts tipus d'impressores, però cada un\n"
-#~ "d'aquests tipus requereix una configuració diferent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si teniu la impressora connectada físicament a l'ordinador, seleccioneu\n"
-#~ "\"Impressora local\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba en un ordinador Unix "
-#~ "remot,\n"
-#~ "seleccioneu \"Impressora remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba en un ordinador Microsoft\n"
-#~ "Windows remot (o en un ordinador Unix que utilitza el protocol SMB),\n"
-#~ "seleccioneu \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Si us plau, engegueu la impressora abans de continuar per tal que el "
-#~ "DrakX\n"
-#~ "la pugui detectar.\n"
-#~ "\n"
-#~ "Aquí heu d'introduir algunes dades.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nom de la impressora: l'spool d'impressió utilitza \"lp\" com a nom "
-#~ "per\n"
-#~ "omissió de la impressora. Per tant, heu de tenir una impressora "
-#~ "anomenada\n"
-#~ "\"lp\".\n"
-#~ "     Si només teniu una impressora, podeu donar-li diversos;\n"
-#~ "noms; només cal que els separeu amb el caràcter \"|\". Per tant,\n"
-#~ "si preferiu un nom més expressiu, l'heu d'indicar en primer lloc\n"
-#~ "(per exemple: \"La meva impressora|lp\").\n"
-#~ "     La impressora que contingui \"lp\" al(s) nom(s) serà la impressora "
-#~ "per omissió.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Descripció: és opcional, però pot ser útil si teniu diverses\n"
-#~ "impressores connectades a l'ordinador o si permeteu que altres\n"
-#~ "ordinadors accedeixin a aquesta impressora.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ubicació: si voleu incloure informació sobre la ubicació de la\n"
-#~ "impressora, feu-ho aquí (podeu escriure el que vulgueu, (per exemple,\n"
-#~ "\"2n pis\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Aquí heu d'introduir algunes dades.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nom de la cua: l'spool d'impressió utilitza \"lp\" com a nom per\n"
-#~ "omissió de la impressora. Per tant, heu de tenir una impressora "
-#~ "anomenada\n"
-#~ "\"lp\".\n"
-#~ "     Si només teniu una impressora, podeu donar-li diversos;\n"
-#~ "noms; només cal que els separeu amb el caràcter \"|\". Per tant,\n"
-#~ "si preferiu un nom més expressiu, l'heu d'indicar en primer lloc\n"
-#~ "(per exemple: \"La meva impressora|lp\").\n"
-#~ "     La impressora que contingui \"lp\" al(s) nom(s) serà la impressora "
-#~ "per omissió.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Directori d'spool: les tasques d'impressió s'emmagatzemen en aquest "
-#~ "directori.Conserveu la opció predeterminada si no sabeu quina utilitzar\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     Si voleu accedir a una impressora que es troba en un ordinador Unix\n"
-#~ "remot, seleccioneu \"Impressora lpd remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Si voleu accedir a una impressora que es troba en un ordinador\n"
-#~ "Microsoft Windows remot (o en un ordinador Unix que utilitza el protocol\n"
-#~ "SMB), seleccioneu \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "     Si voleu accedir a una impressora que es troba en una xarxa "
-#~ "NetWare,\n"
-#~ "seleccioneu \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "No s'ha detectat la vostra impressora. Si us plau, introduïu el nom del\n"
-#~ "dispositiu a què està connectada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per a la vostra informació, la majoria d'impressores estan connectades "
-#~ "al\n"
-#~ "primer port paral·lel, que s'anomena  \"/dev/lp0\" en GNU/Linux i \"LPT1"
-#~ "\"\n"
-#~ "en Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Ara heu de seleccionar la vostra impressora a la llista superior."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Si us plau, seleccioneu les opcions correctes segons la vostra "
-#~ "impressora;\n"
-#~ "consulteu-ne la documentació si no sabeu què heu de seleccionar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Podreu comprovar la configuració en el pas següent i modificar-la si no\n"
-#~ "funciona exactament com voleu."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ara podeu introduir la contrasenya de l'usuari 'root' del vostre\n"
-#~ "sistema Mandrake Linux. Ho heu de fer dos cops per verificar que\n"
-#~ "ambdues introduccions són idèntiques.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'usuari 'root' és l'administrador del sistema, i és l'únic\n"
-#~ "autoritzat per modificar la configuració del sistema; per tant,\n"
-#~ "trieu amb molta cura aquesta contrasenya. L'ús no autoritzat del\n"
-#~ "compte 'root' pot ser extremadament perillós per a la integritat\n"
-#~ "del sistema, per a les seves dades, i per a altres sistema que hi\n"
-#~ "estan connectats.\n"
-#~ "\n"
-#~ "\n"
-#~ "La contrasenya s'ha de crear amb diversos caràcters alfanumèrics, ha de\n"
-#~ "tenir una llargada mínima de 8 caràcters, i mai no s'ha d'anotar enlloc.\n"
-#~ "\n"
-#~ "\n"
-#~ "No obstant això, no creeu una contrasenya excessivament llarga o\n"
-#~ "complicada: heu de poder recordar-la sense problemes."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ara podeu crear un o més comptes \"normals\" d'usuari, en\n"
-#~ "contraposició al compte \"privilegiat\", el 'root'. Podeu crear\n"
-#~ "un o més comptes per a cada una de les persones a qui permetreu\n"
-#~ "utilitzar l'ordinador. Tingueu en compte que cada compte d'usuari\n"
-#~ "tindrà les seves pròpies preferències (entorn gràfic, paràmetres\n"
-#~ "del programa. etc.) i el seu propi \"directori inicial\", on\n"
-#~ "s'emmagatzemen aquestes preferències.\n"
-#~ "\n"
-#~ "\n"
-#~ "Primer de tot, creeu-vos un compte propi! Encara que sigueu l'únic\n"
-#~ "usuari de l'ordinador, NO us connecteu com a 'root'\n"
-#~ "per a l'ús quotidià del sistema: és un risc de seguretat molt alt.\n"
-#~ "Tot sovint, fer el sistema inutilitzable depèn d'un simple error\n"
-#~ "tipogràfic.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per tant, connecteu-vos al sistema amb el compte d'usuari que heu\n"
-#~ "creat, i entreu-hi com a 'root' només per a tasques d'administració\n"
-#~ "i manteniment."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "És molt recomanable crear un disc d'arrencada. Si no podeu arrencar "
-#~ "l'ordinador,\n"
-#~ "és l'única manera de solucionar-ho sense haver de reinstal·lar-ho tot."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Les opcions principals del LILO i del Grub són:\n"
-#~ "  - Dispositiu d'arrencada: Defineix el nom del dispositiu (p.\n"
-#~ "ex., una partició del disc dur) que conté el sector d'arrencada.\n"
-#~ "Tret que sapigueu expressament que s'ha d'indicar una altra cosa,\n"
-#~ "trieu \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Temps d'espera abans d'arrencar la imatge per defecte: Especifica el\n"
-#~ "temps, en dècimes de segon, que el carregador d'arrencada ha\n"
-#~ "d'esperar abans de carregar la primera imatge.\n"
-#~ "Això és útil en sistemes que arrenquen immediatament des del disc\n"
-#~ "dur després d'habilitar el teclat. El carregador d'arrencada no\n"
-#~ "esperarà si s'omet el \"temps d'espera\" o si se li dóna el valor zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Mode de vídeo: Amb això s'especifica el mode de text VGA que\n"
-#~ "cal seleccionar en arrencar. Es poden utilitzar els valors\n"
-#~ "següents:\n"
-#~ "    * normal: selecciona el mode de text 80x25 normal.\n"
-#~ "    * <número>: utilitza el mode de text corresponent.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Neteja de \"/tmp\" en cada arrencada: si voleu suprimir tots els "
-#~ "fitxers i\n"
-#~ "directoris emmagatzemats a \"/tmp\" en arrencar el sistame, seleccioneu\n"
-#~ "aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Si cal, indicació de la mida exacta de la RAM: malauradament, no hi "
-#~ "cap\n"
-#~ "mètode estàndard per preguntar al BIOS la quantitat de RAM que teniu a\n"
-#~ "l'ordinador. Per tant, és possible que el Linux no pugui detectar\n"
-#~ "correctament la quantitat de RAM instal·lada. Si és aquest el cas, en "
-#~ "podeu\n"
-#~ "indicar aquí la quantitat correcta, però penseu que una diferència de 2 o "
-#~ "4\n"
-#~ "MB entre la memòria detectada i la memòria real és normal."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "El SILO és un carregador d'arrencada per a l'SPARC: pot arrencar el\n"
-#~ "GNU/Linux o qualsevol altre sistema operatiu que tingueu a l'ordinador.\n"
-#~ "Normalment, aquests altres sistemes operatius es detecten i instal·len\n"
-#~ "correctament, però si no és així, podeu afegir-los manualment en aquesta\n"
-#~ "pantalla. Aneu amb compte de triar els paràmetres correctes.\n"
-#~ "\n"
-#~ "\n"
-#~ "També és possible que no volgueu donar accés a tothom a aquests sistemes\n"
-#~ "operatius; en aquest cas podeu suprimir les entrades corresponents, però\n"
-#~ "aleshores us caldrà un disc d'arrencada per poder-los arrencar!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Les opcions principals del SILO són:\n"
-#~ "  - Instal·lació del carregador d'arrencada: indica on voleu situar la\n"
-#~ "informació necessària per arrencar el GNU/Linux. Tret que sapigueu\n"
-#~ "exactament què esteu fent, seleccioneu \"Primer sector de la unitat\n"
-#~ "(MBR)\".\n"
-#~ " \n"
-#~ "\n"
-#~ "  - Temps d'espera abans d'arrencar la imatge per defecte: Especifica el\n"
-#~ "temps, en dècimes de segon, que el carregador d'arrencada ha\n"
-#~ "d'esperar abans de carregar la primera imatge.\n"
-#~ "Això és útil en sistemes que arrenquen immediatament des del disc\n"
-#~ "dur després d'habilitar el teclat. El carregador d'arrencada no\n"
-#~ "esperarà si s'omet el \"temps d'espera\" o si se li dóna el valor zero."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ara cal configurar el sistema X Window, que és el nucli del GUI\n"
-#~ "(Interfície gràfica d'usuari) del GNU/Linux. Per a això, heu de\n"
-#~ "configurar la vostra targeta gràfica i el monitor. No obstant\n"
-#~ "això, la majoria d'aquests passos estan automatitzats, així que pot\n"
-#~ "ser que la vostra feina es limiti a verificar què s'ha fet i a\n"
-#~ "acceptar els paràmetres :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quan la configuració hagi acabat s'iniciarà X (tret que demaneu al\n"
-#~ "Drakx que no ho faci), i podreu verificar si els paràmetres us\n"
-#~ "convenen. Si no, podreu tornar enrere i canviar-los tantes vegades\n"
-#~ "com calgui."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Si hi ha algun problema a la configuració X, utilitzeu aquestes opcions\n"
-#~ "per configurar correctament l'X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Si preferiu utilitzar una entrada gràfica, seleccioneu \"Sí\". En cas\n"
-#~ "contrari, seleccioneu \"No\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Podeu triar un nivell de seguretat per al vostre sistema. Si us plau,\n"
-#~ "consulteu el manual per obtenir informació completa. Bàsicament, si no\n"
-#~ "sabeu què triar, conserveu l'opció per defecte.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ara, el sistema es tornarà a arrencar.\n"
-#~ "\n"
-#~ "Després d'això, el sistema Mandrake Linux es carregarà\n"
-#~ "automàticament. Si voleu arrencar un altre sistema operatiu existent,\n"
-#~ "llegiu les instruccions addicionals."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Txec (Programadors)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslovac (Programadors)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nom del perfil a crear:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Escriu a /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formata-ho tot"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Després de formatar totes les particions,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "totes les dades d'aquestes particions s'hauran perdut"
-
-#~ msgid "Reload"
-#~ msgstr "Torna a carregar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Voleu generar un disquet d'instal·lació automàtica per fer còpies del "
-#~ "Linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuració de l'ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Amb un servidor CUPS remot, aquí no us cal configurar cap\n"
-#~ "impressora; les impressores es detectaran automàticament,\n"
-#~ "tret que tingueu un servidor en una altra xarxa; en aquest\n"
-#~ "cas, heu d'indicar l'adreça IP, i opcionalment el número de\n"
-#~ "port, al servidor CUPS."
-
-#~ msgid "Remote queue"
-#~ msgstr "Cua remota"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Cua remota"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Nom de domini"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Cap impressora"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitorització de la xarxa"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#~ msgid "Statistics"
-#~ msgstr "Estadístiques"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "S'està enviant la velocitat: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "S'està rebent la velocitat: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Tipus de connexió: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "S'està establint la connexió a Internet"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "S'està realitzant la desconnexió d'Internet"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "No s'ha pogut realitzar la desconnexió d'Internet"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "La desconnexió d'Internet ha finalitzat"
-
-#~ msgid "Connection complete."
-#~ msgstr "La connexió ha finalitzat."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "No s'ha pogut establir la connexió.\n"
-#~ "Comproveu la configuració al Centre de control de Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "enviat: "
-
-#~ msgid "received: "
-#~ msgstr "rebut: "
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "escombraries"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Predeterminat"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "No s'ha pogut interpretar el contingut del fitxer de configuració."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Fitxer de configuració no reconegut"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#~ msgid "Disable network"
-#~ msgstr "Inhabilita el sistema de xarxa"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Inhabilita el sistema de xarxa"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ara podeu provar el ratolí. Utilitzeu els botons i la bola per comprovar "
-#~ "que\n"
-#~ "els paràmetres són correctes; si no ho són, feu clic a \"Cancel·la\" per\n"
-#~ "seleccionar un altre controlador."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Connexió per DSL (o ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Tanca"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Podeu indicar directament l'URI per accedir a la impressora amb CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Sí, imprimeix una pàgina ASCII de prova"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Sí, imprimeix una pàgina PostScript de prova"
-
-#~ msgid "Paper Size"
-#~ msgstr "Mida del paper"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Voleu expulsar la pàgina després de la tasca?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcions del programa de control Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcions de profunditat del color"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Voleu imprimir el text com a PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Voleu ajustar el text 'stair-stepping'?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombre de pàgines per pàgines de sortida"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marges dret/esquerra en punts (1/72 de polzada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marges superior/inferior en punts (1/72 de polzada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "opcions addicionals del GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opcions addicionals per al text"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverteix l'ordre de les pàgines"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccioneu la connexió de la impressora remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impressora necessita un nom (p.ex. lp).\n"
-#~ "Es poden definir altres paràmetres, com ara la descripció de la "
-#~ "impressora\n"
-#~ "o la seva ubicació. Quin nom cal utilitzar per a aquesta impressora, i "
-#~ "com\n"
-#~ "està connectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada cua d'impressió (a què s'adrecen les tasques d'impressió) necessita\n"
-#~ "un nom (sovint lp) i un directori d'spool associada amb ell. Quin nom i\n"
-#~ "directori cal utilitzar per a aquesta cua, i com està connectada la "
-#~ "impressora?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nom de la cua"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directori d'spool"
-
-#~ msgid "Disable"
-#~ msgstr "Inhabilita"
-
-#~ msgid "Enable"
-#~ msgstr "Habilita"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Per habilitar un sistema més segur, seleccioneu \"Utilitza el\n"
-#~ "fitxer d'ombra\" i \"Utilitza les contrasenyes MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Si la vostra xarxa utilitza NIS, seleccioneu \"Utilitza NIS\". Si no ho\n"
-#~ "sabeu, consulteu a l'administrador de la xarxa."
-
-#~ msgid "yellow pages"
-#~ msgstr "pàgines grogues"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Configuració de la LAN"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 del proveïdor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 del proveïdor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Com us voleu connectar a Internet?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "no es pot bifurcar: "
-
-#~ msgid "Configure..."
-#~ msgstr "Configura..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "S'ha seleccionat la mida %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "S'està obrint la connexió..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Aquest script d'inici intenta carregar els mòduls del ratolí USB."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configuració del LILO/Grub"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuració del tipus d'arrencada"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Ara que ja teniu configurada la connexió a Internet,\n"
-#~ "podeu configurar l'ordinador per tal que la comparteixi.\n"
-#~ "Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
-#~ "xarxa dedicat.\n"
-#~ "\n"
-#~ "Voleu configurar la connexió a Internet compartida?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Benvingut a la utilitat de compartició de la connexió a Internet!"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependències automàtiques"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configura el LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Crea un disquet d'arrencada"
-
-#~ msgid "Choice"
-#~ msgstr "Elecció"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "aurora horitzontal amb bon aspecte"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "aurora vertical tradicional"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Ara podeu seleccionar diverses opcions per al vostre sistema.\n"
-#~ "\n"
-#~ "* Utilització de l'optimització del disc dur: Aquesta opció pot millorar "
-#~ "el\n"
-#~ "rendiment del disc dur, però és només per a usuaris avançats. Alguns "
-#~ "xips\n"
-#~ "amb errors poden fer malbé les vostres dades, així que aneu amb compte. "
-#~ "El\n"
-#~ "nucli inclou una \"llista negra\" d'unitats i jocs de xips, però, si "
-#~ "voleu\n"
-#~ "evitar-vos sorpreses desagradables, no activeu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Selecció d'un nivell de seguretat: Podeu escollir un nivell de\n"
-#~ "seguretat per al sistema. Si us plau, consulteu el manual per a més\n"
-#~ "informació. Bàsicament, si no n'esteu segur, trieu l'opció "
-#~ "predeterminada.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Si cal, indicació de la mida exacta de la RAM: malauradament, no hi "
-#~ "cap\n"
-#~ "mètode estàndard per preguntar al BIOS la quantitat de RAM que hi ha a\n"
-#~ "l'ordinador. Per tant, és possible que el Linux no pugui detectar\n"
-#~ "correctament la quantitat de RAM instal·lada. Si és aquest el cas, en "
-#~ "podeu\n"
-#~ "indicar aquí la quantitat correcta, però penseu que una diferència de 2 o "
-#~ "4\n"
-#~ "MB entre la memòria detectada i la memòria real és normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Muntatge automàtic de suports extraïbles: Si preferiu no haver\n"
-#~ "de muntar manualment les unitats extraïbles (CD-ROM, disquet, Zip)\n"
-#~ "escrivint \"mount\" i \"umount\", seleccioneu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Neteja de \"/tmp\" en cada arrencada: si voleu suprimir tots els "
-#~ "fitxers\n"
-#~ "i directoris que hi ha emmagatzemats a \"/tmp\" quan arranqueu el "
-#~ "sistema,\n"
-#~ "seleccioneu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Habilitació de BlocNum a l'inici: Si voleu que BlocNum s'habiliti "
-#~ "després\n"
-#~ "de l'arrencada, seleccioneu aquesta opció. Tingueu en compte que no heu\n"
-#~ "d'habilitar aquesta opció en portàtils i que BlocNum pot funcionar o pot "
-#~ "no\n"
-#~ "funcionar sota X."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Si us plau, tingueu paciència; la configuració del correu encara no està "
-#~ "implementada."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Benvingut a l'Auxiliar de configuració de la xarxa.\n"
-#~ "Quins components voleu configurar?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Accés a Internet/xarxa"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Miscel·lània"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Preguntes diverses"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "No es pot utilitzar supermount en un nivell d'alta seguretat"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Atenció: EN AQUEST NIVELL DE SEGURETAT NO ES POT ENTRAR COM A ROOT A LA "
-#~ "CONSOLA!\n"
-#~ "Si voleu ser root, heu d'entrar com a usuari i aleshores utilitzar \"su"
-#~ "\".\n"
-#~ "En general, no espereu utilitzar l'ordinador per a altre cosa que com a "
-#~ "servidor.\n"
-#~ "Esteu avisat."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Aneu amb compte; si teniu BlocNúm habilitat, moltes tecles donaran\n"
-#~ "números en comptes de lletres (p.ex., si premeu la `p' obtindreu un `6')"
-
-#~ msgid "not connected"
-#~ msgstr "sense connexió"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Aplicacions científiques"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Servidor, Fitxer/Impressió/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Servidor, DNS/DHCP "
-
-#~ msgid "First DNS Server"
-#~ msgstr "Servidor DNS primari"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Servidor DNS secundari"
-
-#~ msgid "using module"
-#~ msgstr "s'està utilitzant el mòdul"
-
-#~ msgid "Development, Database"
-#~ msgstr "Desenvolupament, base de dades"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Desenvolupament, entorn integrat"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Desenvolupament, eines estàndard"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Avís:\n"
-#~ "Si apliquu els canvis durant l'execució, és possible que l'entorn X "
-#~ "caigui."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Si continueu, tancaré l'entorn %s"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Quin(s) carregador(s) d'arrencada voleu utilitzar?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquet d'instal·lació automàtica"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Voleu que intenti trobar un mòdem?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Configura una connexió per XDSI"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Inhabilita la connexió a Internet"
-
-#~ msgid "Configure local network"
-#~ msgstr "Configura la xarxa local"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configura la connexió a Internet / Configura la xarxa local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "La xarxa local ja s'ha configurat.\n"
-#~ "Voleu:"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulació de gràfics"
-
-#~ msgid "Sciences"
-#~ msgstr "Ciències"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programes de xat (IRC o missatgeria instantània) com ara xchat, licq, "
-#~ "gaim, i eines de transferència de fitxers"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Instal·lacions de comunicació"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Eines d'Internet"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clients de bases de dades i servidors (mysql i postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Desenvolupament C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Zona horària"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(pot malmetre les dades)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Habilita la tecla Bloc Num en iniciar"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmeu la contrasenya"
-
-#~ msgid "default"
-#~ msgstr "predeterminat"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Amb quina finalitat utilitzeu el sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Seleccioneu la mida que voleu instal·lar"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Utilitza el diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalitzada"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Esteu segur que sou un expert? \n"
-#~ "Aquí podreu fer coses molt potents, però també perilloses.\n"
-#~ "\n"
-#~ "Us preguntaran coses com: ``Voleu utilitzar un fitxer d'ombres per a les "
-#~ "contrasenyes?'',\n"
-#~ "Sou capaç de respondre aquest tipus de preguntes?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Utilitza el fitxer d'ombra"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Utilitza les contrasenyes MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cerca"
-
-#~ msgid "Package"
-#~ msgstr "Paquet"
-
-#~ msgid "Tree"
-#~ msgstr "Arbre"
-
-#~ msgid "Sort by"
-#~ msgstr "Ordena per"
-
-#~ msgid "Category"
-#~ msgstr "Categoria"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquets instal·lats"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquets disponibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Mostra només les fulles"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandeix-ho tot"
-
-#~ msgid "Collapse all"
-#~ msgstr "Redueix-ho tot"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Afegeix la ubicació dels paquets"
-
-#~ msgid "Update location"
-#~ msgstr "Actualitza la ubicació"
-
-#~ msgid "Find Package"
-#~ msgstr "Cerca el paquet"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Cerca el paquet que conté el fitxer"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Commuta entre Instal·lats i Disponibles"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "S'estan comprovant les dependències"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ara es desinstal·laran els paquets següents"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Quin paquet esteu cercant"
-
-#~ msgid "No match"
-#~ msgstr "Cap coincidència"
-
-#~ msgid "No more match"
-#~ msgstr "Cap altra coincidència"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Actualment, l'rpmdrake està en el mode ``poca memòria''.\n"
-#~ "Ara tornaré a reiniciar l'rpmdrake per permetre la recerca de fitxers"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Quin fitxer esteu cercant?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Què esteu cercant?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Introduïu un nom (p.ex. `extra', `comercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directori"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "No hi ha cap CD-ROM disponible (no hi ha res a /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "L'URL del directori que conté els RPM"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Per a FTP i HTTP, us cal introduir la ubicació de hdlist\n"
-#~ "Ha de ser relativa a l'URL superior"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Si us plau, trameteu la informació següent"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ja és en ús"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "S'està actualitzant la base dels RPM"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ara s'eliminarà l'entrada %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "S'estan cercant les fulles"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Cal una mica de temps per cercar les fulles"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "He trobat una targeta XDSI:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Altres països"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "A quin país us trobeu?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Mòdem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Mòdem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Si el vostre mòdem adsl és un mòdem Alcatel, seleccioneu Alcatel. Si no, "
-#~ "ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "no utilitzis pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (important)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (molt bonic)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bonic)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "A quin port sèrie està connectat el vostre ratolí?"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, biblioteques, eines"
-
-#~ msgid "Czech"
-#~ msgstr "Txec"
-
-#~ msgid "Slovakian"
-#~ msgstr "Eslovac"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM d'ipchains amb l'urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM de dhcp amb l'urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM de linuxconf amb l'urpmi."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM de bind amb l'urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "No s'ha pogut instal·lar el RPM de caching-nameserver amb l'urpmi"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Torna a configurar la xarxa local"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ " Introducció\n"
-#~ "\n"
-#~ "D'ara endavant, el sistema operatiu i els diferents components que "
-#~ "s'inclouen\n"
-#~ "a la distribució Mandrake Linux s'anomenaran els \"Productes de programari"
-#~ "\".\n"
-#~ "Els Productes de programari inclouen, però no es limiten a, el conjunt "
-#~ "de\n"
-#~ "programes, mètodes, regles i documentació relativa al sistema operatiu i "
-#~ "als\n"
-#~ "diferents components de la distribució Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. Acord de Llicència\n"
-#~ "\n"
-#~ "Si us plau, llegiu aquest document atentament. Aquest document és un "
-#~ "acord\n"
-#~ "de llicència entre vós i MandrakeSoft S.A., 43, rue d'Aboukir, 75002 "
-#~ "París,\n"
-#~ "França, que s'aplica als Productes de programari.\n"
-#~ "Pel fet d'instal·lar, duplicar o utilitzar els Productes de programari, "
-#~ "en \n"
-#~ "qualsevol manera, accepteu i esteu totalment d'acord, de manera "
-#~ "explícita, en\n"
-#~ "sometre-us als termes i condicions d'aquesta Llicència. Si no esteu "
-#~ "d'acord amb\n"
-#~ "qualsevol part d'aquesta Llicència, no esteu autoritzat a instal·lar, "
-#~ "duplicar\n"
-#~ "ni utilitzar els Productes de programari. Qualsevol intent d'instal·lar,\n"
-#~ "duplicar o utilitzar els Productes de programari d'una manera no conforme "
-#~ "als\n"
-#~ "termes i condicions d'aquesta Llicència és invàlid i conclourà els "
-#~ "vostres\n"
-#~ "drets sota aquesta Llicència. En concloure la Llicència, heu de destruir\n"
-#~ "immediatament totes les còpies dels Productes de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. la Llicència GPL i Llicències relacionades\n"
-#~ "\n"
-#~ "Els Productes de programari són components creats per diferents persones "
-#~ "o\n"
-#~ "entitats. La majoria d'aquests components estan coberts pels termes i\n"
-#~ "condicions de la Llicència General Pública de GNU (d'ara endavant \"GPL"
-#~ "\"), o\n"
-#~ "de llicències similars. La majoria d'aquestes llicències us permeten "
-#~ "utilitzar,\n"
-#~ "duplicar, adaptar o redistribuir els components que cobreixen. Si us "
-#~ "plau,\n"
-#~ "llegiu atentament els termes i condicions de l'acord de llicència de "
-#~ "cada\n"
-#~ "component abans d'utilitzar-lo. Qualsevol pregunta sobre un component "
-#~ "s'ha\n"
-#~ "d'adreçar al seu autor i no a MandrakeSoft. Els programes desenvolupats "
-#~ "per\n"
-#~ "MandrakeSoft S.A. estan coberts per la Llicència GPL. La documentació "
-#~ "escrita\n"
-#~ "per MandrakeSoft S.A. està coberta per una llicència específica. Si us "
-#~ "plau,\n"
-#~ "consulteu la documentació per a més informació. Algunes versions dels "
-#~ "Productes\n"
-#~ "de programari poden incloure components que no estiguin coberts per la\n"
-#~ "Llicència GPL o llicències similars; en aquest cas, cada un d'aquests\n"
-#~ "components estarà cobert pels termes i condicions de la seva pròpia "
-#~ "llicència\n"
-#~ "específica. Si us plau, llegiu atentament i respecteu aquestes "
-#~ "llicències\n"
-#~ "específiques abans d'instal·lar, utilitzar o redistribuir els components\n"
-#~ "esmentats. En general, aquestes llicències impediran la transferència,\n"
-#~ "duplicació (excepte amb la finalitat de fer còpies de seguretat),\n"
-#~ "redistribució, enginyeria inversa, desensamblatge, decompilació o "
-#~ "modificació\n"
-#~ "del component. Qualsevol ruptura de l'acord conclourà immediatament els "
-#~ "vostres\n"
-#~ "drets sota la llicència específica. Tret que els termes de la llicència\n"
-#~ "específica us ho autoritzin, normalment no podreu instal·lar els "
-#~ "programes en\n"
-#~ "més d'un sistema ni adaptar-lo per al seu ús en xarxa. Si hi teniu "
-#~ "dubtes,\n"
-#~ "poseu-vos en contacte directament amb el distribuïdor o editor del "
-#~ "component.\n"
-#~ "Normalment, està prohibida la transferència a terceres parts i la còpia\n"
-#~ "d'aquests components, incloent la documentació.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Drets de propietat intel·lectual\n"
-#~ "\n"
-#~ "Tots els drets dels components dels Productes de programari pertanyen als "
-#~ "seus\n"
-#~ "autors respectius i estan protegits per la propietat intel·lectual i les "
-#~ "lleis\n"
-#~ "de copyright aplicables al programari. MandrakeSoft S.A. es reserva els "
-#~ "drets\n"
-#~ "de modificar o adaptar els Productes de programari, ja sigui parcialment "
-#~ "o\n"
-#~ "totalment, per tots els mitjans i per a totes les finalitats. \"Mandrake"
-#~ "\",\n"
-#~ "\"Mandrake Linux\" i els logotips associats son marques registrades de\n"
-#~ "MandrakeSoft S.A.  Tots els drets reservats. Es prohibeix la duplicació "
-#~ "sense\n"
-#~ "consentiment previ per escrit de MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Garantia limitada\n"
-#~ "\n"
-#~ "Els Productes de programari i la documentació que s'hi adjunta es "
-#~ "subministren\n"
-#~ "\"tal com són\", sense cap garantia, fins al punt permès per la llei. En "
-#~ "cas\n"
-#~ "que els Productes de programari siguin defectuosos, MandrakeSoft S.A., a\n"
-#~ "criteri seu, decidirà si reemplaça els Productes de programari o si en\n"
-#~ "reemborsa el preu pagat. Aquesta garantia limitada és nul·la si no "
-#~ "compliu les\n"
-#~ "recomanacions, instruccions i condicions d'ús que s'indiquen a la "
-#~ "documentació\n"
-#~ "o als acords de llicència dels Productes de programari. Fins al punt "
-#~ "permès per\n"
-#~ "la llei, MandrakeSoft S.A. no serà, en cap circumstància, responsable de "
-#~ "cap\n"
-#~ "dany especial, incidental, directe o indirecte (incloent, però sense "
-#~ "limitar-se\n"
-#~ "a, danys per pèrdua de negocis, interrupció de negocis, pèrdues "
-#~ "financeres,\n"
-#~ "honoraris i multes legals que resultin per un judici i qualsevol altre "
-#~ "pèrdua\n"
-#~ "important) que resulti de l'ús o impossibilitat d'utilitzar els Productes "
-#~ "de\n"
-#~ "programari, fins i tot si s'ha notificat a MandrakeSoft S.A. la "
-#~ "possibilitat de\n"
-#~ "que es produeixin aquests danys.\n"
-#~ "\n"
-#~ "RESPONSABILITAT LIMITADA LLIGADA A LA POSESSIÓ O UTILITZACIÓ DE "
-#~ "PROGRAMARI PROHIBIT EN ALGUNES PAÏSOS\n"
-#~ "\n"
-#~ "Fins al put permès per la llei, MandrakeSoft S.A. i els seus "
-#~ "distribuïdors no\n"
-#~ "seran, sota cap circumstància, responsables de cap dany especial, "
-#~ "incidental,\n"
-#~ "directe o indirecte (incloent, però sense limitar-se a, danys per pèrdua "
-#~ "de\n"
-#~ "negocis, interrupció de negocis, pèrdues financeres, honoraris i multes "
-#~ "legals\n"
-#~ "que resultin per un judici i qualsevol altre pèrdua important) que "
-#~ "resultin de\n"
-#~ "la possessió i ús de components de programari o de la descàrrega de "
-#~ "components\n"
-#~ "de programari d'algun dels llocs web de Mandrake Linux que estiguin "
-#~ "prohibits o\n"
-#~ "restringits en alguns països per lleis locals. Aquesta responsabilitat "
-#~ "limitada\n"
-#~ "s'aplica, però no està restringida a, els potents components de "
-#~ "criptografia\n"
-#~ "inclosos en els Productes de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Lleis aplicables \n"
-#~ "\n"
-#~ "Si qualsevol part d'aquest acord és declarat nul, il·legal o inaplicable "
-#~ "en un\n"
-#~ "judici, aquesta part s'exclou del contracte, però seguiu obligat per les "
-#~ "altres\n"
-#~ "seccions aplicables de l'acord. Els termes i condicions d'aquesta "
-#~ "Llicència\n"
-#~ "estan coberts per les lleis de França. Preferiblement, tots els desacords "
-#~ "sobre\n"
-#~ "els termes d'aquesta Llicència es resoldran fora dels tribunals. Com a "
-#~ "últim\n"
-#~ "recurs, el plet es dirimirà en els tribunals de París, França.\n"
-#~ "Per a qualsevol pregunta sobre aquest document, poseu-vos en contacte "
-#~ "amb\n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 París, França.\n"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Es pot configurar el vostre ordinador per tal que comparteixi la connexió "
-#~ "a Internet.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "S'ha configurat tot.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Connecta't a Internet amb un mòdem normal"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Connecta't a Internet mitjançant XDSI"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Connecta't a Internet mitjançant DSL (o ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Connecta't a Internet mitjançant cable"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Temps (en segons) d'inactivitat després del qual\n"
-#~ "penjarà (deixeu-ho en blanc per inhabilitar-ho)."
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Alemanya (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Què voleu fer?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Instal·la/Rescata"
-
-#~ msgid "Rescue"
-#~ msgstr "Rescata"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Quin tipus de partició voleu?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Escolliu \"Instal·lació\" si no hi ha instal·lada cap versió anterior de "
-#~ "GNU/Linux,\n"
-#~ "o si voleu utilitzar diverses distribucions o versions.\n"
-#~ "\n"
-#~ "Escolliu \"Rescat\" si voleu rescatar una versió anterior de\n"
-#~ "Mandrake Linux ja instal·lada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Recomanada: Si mai no heu instal·lat el GNU/Linux,\n"
-#~ "    escolliu aquesta opció.\n"
-#~ "  - Personalitzada: Si esteu prou familiaritzat amb el GNU/Linux, podeu\n"
-#~ "    triar l'ús principal del vostre ordinador. Consulteu-ne els detalls\n"
-#~ "    més avall.\n"
-#~ "\n"
-#~ "  - Per a experts: S'assumeix que domineu el GNU/Linux i voleu realitzar "
-#~ "una\n"
-#~ "    instal·lació altament personalitzada. Com en el cas del tipus\n"
-#~ "    d'instal·lació \"Personalitzada\", podreu seleccionar l'ús del "
-#~ "vostre\n"
-#~ "    sistema.\n"
-#~ "    Però, si us plau, sobretot NO TRIEU AQUESTA OPCIÓ TRET QUE SAPIGUEU "
-#~ "QUÈ ESTEU FENT!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "En aquest moment podeu decidir quina(es) partició(ns) voleu utilitzar\n"
-#~ "per instal·lar el sistema Mandrake Linux, si és que ja es va(n)\n"
-#~ "definir (en una instal·lació anterior del GNU/Linux o mitjançant una\n"
-#~ "altra eina de partició). En altres casos, s'han de definir les\n"
-#~ "particions del disc dur: aquesta operació consisteix en dividir el\n"
-#~ "disc dur de l'ordinador en àrees lògiques separades.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si heu de crear noves particions, utilitzeu \"Assignació\n"
-#~ "automàtica\" per crear particions per al GNU/Linux de manera automàtica.\n"
-#~ "Podeu triar el disc on s'hi han de fer les particions fent clic a\n"
-#~ "\"hda\" per a la primera unitat IDE, \"hdb\" per a la segona, o\n"
-#~ "\"sda\" per a la primera unitat SCSI, i així successivament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dues particions habituals són: la partició root (/), que és el punt\n"
-#~ "d'inici de la jerarquia de directoris del sistema de fitxers, i\n"
-#~ "/boot, que conté tots els fitxers necessaris per iniciar el sistema\n"
-#~ "operatiu quan s'arrenca l'ordinador per primer cop.\n"
-#~ "\n"
-#~ "\n"
-#~ "Donat que aquest procés sol ser irreversible, la partició d'un disc\n"
-#~ "és sovint un procés que espanta als usuaris sense experiència, però\n"
-#~ "el DiskDrake simplifica molt aquest procés. Consulteu la documentació\n"
-#~ "i preneu-vos tant temps com sigui necessari abans de realitzar la\n"
-#~ "partició.\n"
-#~ "\n"
-#~ "Podeu accedir a qualsevol opció mitjançant el teclat: desplaceu-vos per "
-#~ "les particions amb el tabulador i les fletxes amunt i avall. Quan se "
-#~ "selecciona una partició, podeu utilitzar:\n"
-#~ "\n"
-#~ "- Ctrl-c  per crear una nova partició (quan se selecciona una partició "
-#~ "buida)\n"
-#~ "\n"
-#~ "- Ctrl-d  per suprimir una partició\n"
-#~ "\n"
-#~ "- Ctrl-m  per definir el punt de muntatge\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Cal formatar les particions que s'acaben de definir per poder-les\n"
-#~ "utilitzar ('formatar' significa 'crear un sistema de fitxers').\n"
-#~ "En aquest punt podeu, si voleu, tornar a formatar particions\n"
-#~ "existents per eliminar les dades que contenen. Nota: no és\n"
-#~ "necessari tornar a formatar les particions existents, especialment\n"
-#~ "si contenen fitxers o dades que voleu conservar.\n"
-#~ "Els directoris que es solen conservar són /home i /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Ara s'estan instal·lant els paquets seleccionats. Aquesta operació\n"
-#~ "trigarà pocs minuts, tret que hagueu escollit actualitzar un\n"
-#~ "sistema existent; en aquest cas trigarà més temps, fins i tot\n"
-#~ "abans que s'iniciï la instal·lació."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Si el DrakX no ha pogut trobar el ratolí, o si voleu comprovar què\n"
-#~ "ha fet, a la part superior apareixerà la llista de ratolins.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si esteu d'acord amb els paràmetres del DrakX, feu clic a 'D'acord'.\n"
-#~ "Si no, escolliu, al menú superior, el tipus de ratolí que us sembli més "
-#~ "semblant al vostre.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si es tracta d'un ratolí sèrie, també us caldrà indicar al DrakX a\n"
-#~ "quin port sèrie està connectat."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Aquesta secció està dedicada a la configuració d'una xarxa local\n"
-#~ "(LAN) o d'un mòdem.\n"
-#~ "\n"
-#~ "Escolliu \"LAN local\" i el DrakX intentarà trobar un adaptador\n"
-#~ "Ethernet al vostre ordinador. El sistema trobarà i inicialitzarà\n"
-#~ "automàticament els adaptadors PCI.\n"
-#~ "No obstant això, si el vostre perifèric és ISA, la detecció\n"
-#~ "no funcionarà, i us caldrà escollir un programa de control a la\n"
-#~ "llista que apareixerà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Com en el cas dels adaptadors SCSI, podeu deixar que, d'entrada,\n"
-#~ "el programa de control comprovi l'adaptador; si no ho feu així, us\n"
-#~ "caldrà especificar les opcions del programa de control que haureu\n"
-#~ "d'anar a buscar a la documentació del vostre maquinari.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si instal·leu un sistema Mandrake Linux en un ordinador que forma\n"
-#~ "part d'una xarxa existent, l'administrador de la xarxa us haurà de\n"
-#~ "facilitar la informació necessària (l'adreça IP, la submàscara de\n"
-#~ "xarxa i el nom de l'ordinador central). Si esteu configurant una\n"
-#~ "xarxa privada, com ara a casa, haureu d'escollir les adreces.\n"
-#~ "\n"
-#~ "\n"
-#~ "Escolliu \"Marcatge amb mòdem\" i es configurarà la connexió a\n"
-#~ "Internet amb un mòdem. El DrakX intentarà trobar el mòdem, però,\n"
-#~ "si no se'n surt, us caldrà seleccionar el port sèrie al qual està\n"
-#~ "connectat."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "El GNU/Linux pot treballar amb molts tipus d'impressores. Per a cada\n"
-#~ "un d'aquests tipus, però, cal una configuració diferent. Tingueu\n"
-#~ "en compte, però, que l'spooler utilitza 'lp' com a nom d'impressora\n"
-#~ "per defecte, de manera que heu de tenir una impressora amb aquest nom.\n"
-#~ "No obstant això, podeu donar diferents noms a una impressora, separant-\n"
-#~ "los amb el caràcter '|'. D'aquesta manera, si voleu donar-li un nom més\n"
-#~ "aclaridor només us caldrà indicar-lo en primer lloc, p.ex. \"La meva\n"
-#~ "impressora|lp\".\n"
-#~ "La impressora que contingui \"lp\" al(s) nom(s) serà la impressora per\n"
-#~ "defecte\n"
-#~ "\n"
-#~ "\n"
-#~ "Si la vostra impressora està connectada directament a l'ordinador,\n"
-#~ "seleccioneu \"Impressora local\". Haureu d'indicar a quin port\n"
-#~ "està connectada i seleccionar-ne el filtre corresponent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba a un ordinador Unix\n"
-#~ "remot, seleccioneu \"lpd remot\". Per poder-la fer funcionar no\n"
-#~ "cal cap nom d'usuari ni contrasenya, però us caldrà saber el nom\n"
-#~ "de la cua d'impressió del servidor remot.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora SMB (és a dir, una impressora\n"
-#~ "que es troba a un ordinador remot amb Windows 9x/NT), per poder-ho\n"
-#~ "fer haureu d'indicar el seu nom SMB (que no és el seu nom TCP/IP)\n"
-#~ "i possiblement la seva adreça IP, nom d'usuari, grup de treball,\n"
-#~ "contrasenya, i, evidentment, el nom de la impressora. El mateix\n"
-#~ "per a una impressora NetWare, però en aquest cas no us caldrà la\n"
-#~ "informació del grup de treball."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "És molt recomanable que respongueu \"Sí\" aquí. Si més endavant\n"
-#~ "instal·leu Microsoft Windows, sobreescriurà el sector d'arrencada.\n"
-#~ "Tret que hagueu fet el disc d'arrencada com es\n"
-#~ "recomana, ja no podreu tornar a arrencar el GNU/Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Moveu la bola!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Voleu descartar els canvis?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "De quin tipus és el vostre ratolí?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Resolucions automàtiques"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Per saber quines resolucions estan disponibles, en provaré algunes.\n"
-#~ "La pantalla parpellejarà...\n"
-#~ "Ho podeu desactivar si voleu; sentireu un avís sonor quan estigui llest"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Puc mirar de trobar les resolucions disponibles (p.ex. 800x600).\n"
-#~ "De vegades, però, això pot penjar l'ordinador.\n"
-#~ "Us hi voleu arriscar?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "No s'han trobat modes vàlids\n"
-#~ "Intenteu-ho amb una altra targeta de vídeo o monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Recerca automàtica de resolucions"
-
-#~ msgid "dhcpd"
-#~ msgstr "dhcpd"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Mouse"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB Mouse (2 botons)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB Mouse (3 o més botons)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB Mouse"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB Mouse (2 botons)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB Mouse (3 o més botons)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Mouse (3 o més botons)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A o superior (sèrie)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (sèrie)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (sèrie)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (sèrie)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generic Mouse (sèrie)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Compatible Microsoft (sèrie)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Ratolí Generic de 3 botons (sèrie)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Ratolí Kensington Thinking (sèrie)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Necessito configurar el vostre adaptador de xarxa por poder connectar a "
-#~ "Internet."
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ha fallat el muntatge de l'nfs"
-
-#~ msgid "Socket"
-#~ msgstr "Sòcol"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "El DrakX generarà els fitxers de configuració tant per a l'XFree 3.3 com "
-#~ "per a l'Xfree 4.0.\n"
-#~ "Per defecte, s'utilitza el servidor 4.0, tret que no funcioni per a la "
-#~ "vostra targeta.\n"
-#~ "\n"
-#~ "Voleu conservar l'Xfree 3.3?"
-
-#~ msgid "tie"
-#~ msgstr "llaç"
-
-#~ msgid "brunette"
-#~ msgstr "morena"
-
-#~ msgid "girl"
-#~ msgstr "noia"
-
-#~ msgid "woman-blond"
-#~ msgstr "dona-rossa"
-
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Criptogràfic"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Encarrega't del disc dur"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "No configuris la xarxa"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Voleu configurar la xarxa local per al vostre sistema?"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Us han donat un nom d'ordinador central?"
-
-#~ msgid "Show less"
-#~ msgstr "Mostra'n menys"
-
-#~ msgid "Show more"
-#~ msgstr "Mostra'n més"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI per a la impressora local"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "URI per a la impressora de xarxa"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Dispositiu de la impressora local (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "A quin dispositiu URI està connectada la vostra impressora?\n"
-#~ "(tingueu en compte que parallel:/dev/lp0 equival a LPT1:)"
-
-#~ msgid "Network Printer Options (URI)"
-#~ msgstr "Opcions de la impressora de xarxa (URI)"
-
-#~ msgid ""
-#~ "Choose the right Device URI for a network printer or a local file. "
-#~ "Examples:\n"
-#~ "   file:/path/to/filename.prn\n"
-#~ "   http://hostname:631/ipp/port1\n"
-#~ "   ipp://hostname/ipp/port1\n"
-#~ "   lpq://hostname/queue\n"
-#~ "   socket://hostname\n"
-#~ "   socket://hostname:9100"
-#~ msgstr ""
-#~ "Seleccioneu l'URI de dispositiu correcte per a una impressora de xarxa o "
-#~ "un fitxer local. Exemples:\n"
-#~ "   file:/camí/al/nomdefitxer.prn\n"
-#~ "   http://ordinadorcentral:631/ipp/port1\n"
-#~ "   ipp://ordinadorcentral/ipp/port1\n"
-#~ "   lpq://ordinadorcentral/cua\n"
-#~ "   socket://ordinadorcentral\n"
-#~ "   socket://ordinadorcentral:9100"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "Especificació de la xarxa d'àrea local"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Ara podeu decidir quina xarxa de classe C voleu utilitzar.\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "Connexió a Internet compartida: configuració de %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Ara es configurarà la interfície següent:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "S'ha configurat tot!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Quina és la disposició del vostre teclat?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Voleu que intenti trobar targetes PCMCIA?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Voleu que intenti trobar els dispositius %s?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "Voleu configurar el marcatge amb xarxa per mòdem per al vostre sistema?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Voleu que intenti trobar dispositius PCI?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "S'està cercant la partició arrel."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr ""
-#~ "%s: Aquesta partició no és arrel; si us plau, seleccioneu-ne una altra."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Si us plau, seleccioneu una partició per utilitzar-la com a arrel."
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "No teniu cap partició de Windows!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "No teniu prou espai per al Lnx4win"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Benvingut al LILO, la utilitat que us permet triar el sistema operatiu!\n"
-#~ "\n"
-#~ "Per obtenir una llista de les eleccions possibles, premeu <TAB>.\n"
-#~ "\n"
-#~ "Per carregar-ne una, escriviu-ne el nom i premeu <INTRO> o espereu %d "
-#~ "segons\n"
-#~ "fins a l'arrencada predeterminada.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Benvingut al SILO, la utilitat que us permet triar el sistema operatiu!\n"
-#~ "\n"
-#~ "Per obtenir una llista de les eleccions possibles, premeu <TAB>.\n"
-#~ "\n"
-#~ "Per carregar-ne una, escriviu-ne el nom i premeu <INTRO> o espereu %d "
-#~ "segons\n"
-#~ "fins a l'arrencada predeterminada.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Opcions principals del SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Aquestes són les entrades següents del SILO.\n"
-#~ "Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Aquesta etiqueta ja està en ús"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Ha fallat la instal·lació del SILO. S'ha produït l'error següent:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "En primer lloc, el DrakX intentarà trobar un o més adaptadors SCSI\n"
-#~ "PCI. Si en troba, i sap quin(s) programa(es) de control utilitzar,\n"
-#~ "l'inserirà o els inserirà automàticament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si el vostre adaptador SCSI és una targeta ISA, o si és PCI però\n"
-#~ "el DrakX no sap amb quin programa de control ha d'utilitzar-la, o\n"
-#~ "si no teniu cap adaptador SCSI, se us preguntarà si en teniu un o\n"
-#~ "no. Si no en teniu cap, respongueu \"No\". Si en teniu un o més,\n"
-#~ "respongueu \"Sí\". Apareixerà una llista de programes de control,\n"
-#~ "de la qual n'haureu de triar un.\n"
-#~ "\n"
-#~ "\n"
-#~ "Un cop hagueu triat el programa de control, el DrakX us preguntarà\n"
-#~ "si voleu establir-ne les opcions. Primer, però, deixeu que el\n"
-#~ "programa de control explori el maquinari: normalment funciona bé.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no, no oblideu la informació sobre el vostre maquinari que\n"
-#~ "pugueu aconseguir a la documentació o al Windows (si el teniu al\n"
-#~ "sistema), com aconsella la guia d'instal·lació. Aquestes són les\n"
-#~ "opcions que haureu de proporcionar al programa de control."
-
-#~ msgid "Shutting down"
-#~ msgstr "S'està tancant l'ordinador"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "S'han trobat alguns tipus de lletra \"true type\" del Windows a "
-#~ "l'ordinador.\n"
-#~ "Voleu utilitzar-les? Assegureu-vos que esteu autoritzat a utilitzar-les "
-#~ "sota Linux."
-
-#~ msgid "useless"
-#~ msgstr "inútil"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Escolliu \"Instal·la\" si no hi ha instal·lada cap versió anterior de "
-#~ "Linux,\n"
-#~ "o si voleu utilitzar diverses distribucions o versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Escolliu \"Actualització\" si voleu actualitzar una versió anterior de\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 o 7.0 (Air)."
-
-#~ msgid ""
-#~ "(a user ``mandrake'' with password ``mandrake'' has been automatically "
-#~ "added)"
-#~ msgstr ""
-#~ "(s'ha afegit automàticament un usuari ``mandrake'' amb contrasenya "
-#~ "``mandrake'')"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Voleu utilitzar el LILO?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Ara podeu seleccionar els paquets que voleu instal·lar.\n"
-#~ "\n"
-#~ "\n"
-#~ "En primer lloc, podeu seleccionar el grup del paquet a instal·lar\n"
-#~ "o actualitzar. Després, podeu seleccionar més paquets segons la\n"
-#~ "mida total que voleu seleccionar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si treballeu amb el mode expert, podeu seleccionar els paquets\n"
-#~ "individualment.\n"
-#~ "Tingueu en compte, però, que alguns paquets necessiten que altres\n"
-#~ "també estiguin instal·lats.\n"
-#~ "Això s'anomena 'dependència de paquets'. Els paquets que\n"
-#~ "seleccioneu, i els que aquests necessitin, es seleccionaran\n"
-#~ "automàticament per a la instal·lació. No és possible instal·lar un\n"
-#~ "paquet sense instal·lar-ne tots els dependents."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "El LILO (el carregador de Linux) pot arrencar el Linux i altres sistemes\n"
-#~ "operatius, que normalment es detecten correctament durant la "
-#~ "instal·lació.\n"
-#~ "Si veieu que el vostre no s'ha detectat, ara podeu afegir-ne un o més.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no voleu que tothom pugui accedir a algun d'ells, podeu\n"
-#~ "eliminar-lo ara (caldrà un disc d'arrencada per arrencar-lo)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "Ara que ja heu seleccionat els grups desitjats, seleccioneu \n"
-#~ "quants paquets voleu, ordenant-los des de la instal·lació mínima \n"
-#~ "fins a la instal·lació completa de cadascun dels grups seleccionats."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "Us calen %dMB per a una instalació completa dels grups que heu "
-#~ "seleccionat.\n"
-#~ "Podeu continuar igualment, però tingueu en compte que no tindreu tots els "
-#~ "paquets"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Escolliu un altre CD per instal·lar"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ "  - Recomanada: Si mai no heu instal·lat el Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Personalitzada: Si esteu familiaritzat amb el Linux, podreu\n"
-#~ "triar l'ús del sistema instal·lat entre Normal, Desenvolupament o\n"
-#~ "Servidor. Trieu \"Normal\" per a una instal·lació per a un ús\n"
-#~ "general del vostre ordinador, \"Desenvolupament\" si utilitzareu\n"
-#~ "l'ordinador principalment per a desenvolupament de programari,\n"
-#~ "o \"Servidor\" si voleu instal·lar un servidor convencional (per\n"
-#~ "a correu, impressions...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Per a experts: Si domineu el GNU/Linux i voleu realitzar una\n"
-#~ "instal·lació totalment personalitzada, aquest és el vostre\n"
-#~ "tipus d'instal·lació. Podreu seleccionar l'ús del vostre sistema\n"
-#~ "com a \"Personalitzada\"."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "S'estan descarregant els paquets criptogràfics"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Configura el SCSI"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "CD d'instal·lació Nr %s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "Actualitzeu la imatge de la instal·lació!\n"
-#~ "\n"
-#~ "Consulteu a l'administrador del sistema o torneu a arrencar per "
-#~ "actualitzar\n"
-#~ "la imatge de la instal·lació per incloure la imatge en CD-ROM etiquetada "
-#~ "com\n"
-#~ "\"%s\". Premeu D'acord si la imatge s'ha actualitzat o premeu Cancel·la "
-#~ "per\n"
-#~ "no fer la instal·lació des d'aquesta imatge en Cd-ROM."
-
-#~ msgid "Which language do you want?"
-#~ msgstr "Quin idioma voleu?"
-
-#~ msgid "Hurt me plenty"
-#~ msgstr "Fes-me molt de mal"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Quina utilització voleu?"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Instal·lació o actualització"
-
-#~ msgid "Enter a floppy (all data will be lost)"
-#~ msgstr ""
-#~ "Inseriu un disquet a la unitat\n"
-#~ "(Se'n perdran totes les dades)"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Ara s'instal·laran %d MB. Podeu triar instal·lar més programes"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "S'han escollit massa paquets: %dMB no cap a %dMB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Fitxer d'inici ràpid %s incorrecte (ha fallat %s)"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Mida: %s MB"
-
-#~ msgid "US Keyboard"
-#~ msgstr "Teclat EU"
-
-#~ msgid "resizing"
-#~ msgstr "s'està canviant la mida"
-
-#~ msgid "changing type of"
-#~ msgstr "s'està canviant el tipus de"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Després de %s partició %s,"
-
-#~ msgid "linear"
-#~ msgstr "lineal"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Lineal (necessari per a algunes unitats SCSI)"
-
-#~ msgid "beginner"
-#~ msgstr "principiant"
-
-#~ msgid "developer"
-#~ msgstr "desenvolupador"
-
-#~ msgid "Password:"
-#~ msgstr "Contrasenya:"
-
-#~ msgid "User name:"
-#~ msgstr "Nom d'usuari:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "No s'ha pogut crear un disquet d'arrencada HTP.\n"
-#~ "Potser us caldrà reiniciar la instal·lació i introduir \"%s\" a "
-#~ "l'indicador"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Cal reiniciar la instal·lació amb els nous paràmetres"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Cal reiniciar la instal·lació arrencant des del disquet"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Introduïu un disquet per una arrencada habilitada per a HTP\n"
-#~ "(es perdran totes les dades del disquet)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "El Linux encara no suporta completament l'ultra dma 66.\n"
-#~ "Com a alternativa, puc fer un disquet personalitzat que doni accés a tot "
-#~ "el disc dur a ide2 i ide3"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Ja existeix una entrada %s"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "CD d'instal·lació Nr 1"
-
-#~ msgid "Local LAN"
-#~ msgstr "LAN local"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
deleted file mode 100644
index 3b88dd7d4..000000000
--- a/perl-install/share/po/cs.po
+++ /dev/null
@@ -1,12241 +0,0 @@
-# Czech messages for DrakX.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (C) 1999 MandrakeSoft
-# Vladimír Marek <vlmarek@volny.cz>, 2000
-# Radek Vybiral <Radek.Vybiral@vsb.cz>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 14:25GMT+0100\n"
-"Last-Translator: Radek Vybíral <Radek.Vybiral@vsb.cz>\n"
-"Language-Team: Czech <cs@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigurovat v¹echny monitory nezávisle"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Pou¾ít roz¹íøení Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurovat pouze kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfigurace dvou monitorù"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vá¹ systém podporuje zobrazení na dvou monitorech.\n"
-"Co chcete dìlat?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafická karta"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Zvolte typ va¹í grafické karty"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Zvolte X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Zvolte ovladaè pro X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Ovladaè pro X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Které XFree by jste chtìli pou¾ít?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹e karta podporuje 3D akceleraci, ale pouze s XFree %s.\n"
-"Pokud pou¾ijete XFree %s, mù¾ete na druhou stranu dosáhnout lep¹ích výsledkù "
-"ve 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "S XFree %s mù¾e va¹e karta vyu¾ít 3D hardwarové akcelerace."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s hardwarovou 3D akcelerací"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"S XFree %s mù¾e va¹e karta vyu¾ít 3D hardwarové akcelerace.\n"
-" TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MÙ®E VÉST K NESTABILITÌ SYSTÉMU."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENTÁLNÍ 3D hardwarovou akcelerací"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹e karta podporuje 3D akceleraci, ale pouze s XFree %s,\n"
-"TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MÙ®E VÉST K NESTABILITÌ SYSTÉMU.\n"
-"Va¹e karta je podporována i v XFree %s, kde mù¾e mít lep¹í podporu pro 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalaèní ovladaè pro obrazovku)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Nastavení XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Kolik pamìti je na va¹í grafické kartì ?"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Zvolte mo¾nosti pro daný X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Zvolte typ svého monitoru"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva rozhodující parametry jsou: vertikální synchronizaèní frekvence, co¾ je\n"
-"frekvence, kterou je obnovována celá obrazovka, a frekvence øádkové\n"
-" synchronizace (horiz. sync. rate), co¾ je frekvence jakou jsou zobrazovány\n"
-"jednotlivé mikroøádky (scanline).\n"
-"\n"
-"Je VELMI DÙLE®ITÉ abyste nezvolili typ monitoru se schopnostmi vy¹¹ími ne¾ "
-"má\n"
-"vá¹ monitor, proto¾e byste si ho tím mohli po¹kodit. Jestli¾e si nejste "
-"jistí\n"
-"zvolte radìji typ s ni¾¹ími schopnostmi."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontální(øádková) synchronizace"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikální(obrazovková) synchronizace"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor není nastaven"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafická karta je¹tì není nastavena"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Je¹tì nejsou zvolena rozli¹ení"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Chcete si vyzkou¹et nastavení?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varování: na této grafické kartì je testování nebezpeèné"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Vyzkou¹et nastavení"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"zkuste zmìnit nìkteré parametry"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Vyskytla se tato chyba:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Test skonèí automaticky za %d sekund"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Je to správné nastavení?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Vyskytla se chyba, zkuste zmìnit nìkteré parametry"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rozli¹ení"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Vyberte si rozli¹ení a barevnou hloubku"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafická karta: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Více"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Expertní re¾im"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ukázat v¹e"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rozli¹ení"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Rozlo¾ení klávesnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ my¹i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Pøípojení my¹i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontální frekvence monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikální frekvence monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafická karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikace grafické karty: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Pamì» na gr. kartì: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barevná hloubka: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozli¹ení: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovladaè: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pøipravuji nastavení X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Co chcete dìlat?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Zmìnit monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Zmìnit grafickou kartu"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Zmìnit parametry X Serveru"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Zmìnit rozli¹ení"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Zobrazit informace"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Znovu vyzkou¹et nastavení X"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Konec"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachovat zmìny?\n"
-"Aktuální konfigurace je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Spou¹tí se X"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mù¾u nastavit vá¹ poèítaè tak, aby automaticky spustil X pøi startu.\n"
-"Chcete aby poèítaè po zapnutí spustil grafický re¾im?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Pro aktivaci zmìn se prosím znovu pøihlaste na %s"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Prosím odhlaste se a pak stisknìte Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 barev (8 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisíc barev (15 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisíc barev (16 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliónù barev (24 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy barev (32 bitù)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB nebo více"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Klasické VGA, 640x480 pøi 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 pøi 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Kompatibilní s 8514, 1024x768 pøi 87 Hz prokládanì (ne 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 pøi 87 Hz prokládanì, 800x600 pøi 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Lep¹í Super VGA, 800x600 pøi 60 Hz, 640x480 pøi 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprokládaná SVGA, 1024x768 pøi 60 Hz, 800x600 pøi 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Vysokofrekvenèní SVGA, 1027x768 pøi 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multifrekvenèní který umí 1280x1024 pøi 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multifrekvenèní, který umí 1280x1024 pøi 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multifrekvenèní, který umí 1280x1024 pøi 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, který umí 1600x1200 pøi 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, který umí 1600x1200 pøi 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "První sektor zavádìcího diskového oddílu"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "První sektor disku (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalace SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam chcete nainstalovat zavádìcí program?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalace LILO/Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO s textovou nabídkou"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickou nabídkou"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Spu¹tìní s DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Základní nastavení zavádìcího programu"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Zavádìcí program"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalace zavádìcího programu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Startovací zaøízení"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nefunguje se starým BIOSem)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktní"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktní"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Textový re¾im"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Prodleva pøed automatickým spu¹tìním"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Heslo"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Heslo (podruhé)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Omezení nastavení z pøíkazové øádky"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "omezení"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Vyèistit /tmp pøi ka¾dém startu"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pokud je tøeba, upøesnìte velikost pamìti (nalezeno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Povolit více profilù"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Zadejte velikost pamìti v MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Volba ''Omezení nastavení z pøíkazové øádky'' je bezpøedmìtné bez hesla"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Zkuste to znovu, prosím"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Hesla nejsou shodná"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Úvodní zpráva"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Prodleva pro firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Prodleva pøi spu¹tìní"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Povolit spu¹tìní z CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Povolit zavadìè OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Výchozí OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Rozhodli jste se nainstalovat zavadìè systému na oddíl.\n"
-"To znamená, ¾e ji¾ zavadìè na disku, ze kterého spou¹títe systém nìjaký je "
-"(napø. System Commander).\n"
-"\n"
-"Ze kterého disku spou¹títe systém?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tady jsou v¹echny záznamy.\n"
-"Mù¾ete pøidat dal¹í nebo zmìnit stávající."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Pøidat"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hotovo"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Zmìnit"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Jaký typ záznamu chcete pøidat?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Jiný systém (SunOs...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Jiný systém (MacOs...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Jiný systém (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Obraz(image)"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Koøenový(root)"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Pøipojit"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Pro ètení i zápis"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabulka"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nejistý"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Znaèka"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Výchozí"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-velikost"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Bez Videa"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Odstranit záznam"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prázdná znaèka není povolena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Musíte zadat soubor s jádrem"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Musíte zadat koøenový oddíl"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Tato znaèka se ji¾ pou¾ívá"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Na¹el jsem %s %s rozhraní"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Máte je¹tì nìjaké jiné?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Máte nìjaké %s rozhraní?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ano"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ukázat informace o hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaluji ovladaè pro %s kartu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Který %s ovladaè mám zkusit?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"V nìkterých pøípadech potøebuje ovladaè %s pro svoji správnou funkci dal¹í\n"
-"informace, pøesto¾e normálnì funguje i bez nich. Chtìli byste zadat\n"
-"nìjaké doplòující mo¾nosti, nebo radìji necháte ovladaè samostatnì "
-"prozkoumat\n"
-"hardware va¹eho poèítaèe, aby získal informace které potøebuje? Zkoumání\n"
-"hardware mù¾e ve vyjímeèných pøípadech zpùsobit zamrznutí poèítaèe, ale "
-"nemìlo\n"
-"by v ¾ádném pøípadì zpùsobit jiné ¹kody."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatické prozkoumání"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Zadejte mo¾nosti"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Nyní lze zadat volby pro pøíslu¹ný modul %s.\n"
-"Pozn.: ka¾dá adresa by mìla být ve tvaru 0x napø. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nyní mù¾ete poskytnout modulu %s dal¹í parametry.\n"
-"Volby se zadávají ve tvaru ''jméno=hodnota jméno2=hodnota2 ...''.\n"
-"Napøíklad, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Volby modulu:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Spu¹tìní modulu %s selhalo.\n"
-"Chcete to zkusit s jinými parametry?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pøístup k programùm v X prostøedí"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pøístup k rpm nástrojùm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "povolit \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pøístup k administrativním souborùm"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(u¾ byl pøidán %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Toto heslo je pøíli¹ jednoduché"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Prosím zadejte u¾ivatelské jméno"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "U¾ivatelské jméno mù¾e obsahovat pouze malá písmena, èísla, '-' a '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Toto u¾ivatelské jméno u¾ bylo pøidáno"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Pøidat u¾ivatele"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Zadejte u¾ivatele\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Vytvoøit u¾ivatele"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Skuteèné jméno"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "U¾ivatelské jméno"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatické pøihlá¹ení"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mù¾u nastavit vá¹ poèítaè tak, aby automaticky pøihlásil vybraného "
-"u¾ivatele.\n"
-"Chcete pou¾ít tuto mo¾nost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Zvolte standardního u¾ivatele :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si, který správce oken má být spou¹tìn:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Prosím zvolte si jazyk, který chcete pou¾ívat."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Mù¾ete si zvolit dal¹í jazyky, které budou dostupné po instalaci"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "V¹echno"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Povolit v¹em u¾ivatelùm"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Vlastní"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nesdílet"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Balíèek %s musí být nainstalován. Chcete ho nainstalovat?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Nyní lze provést export pøes NFS nebo Samba protokol. Který chcete"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Chybí potøebný balíèek %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Chcete povolit u¾ivatelùm, aby si mohli sdílet adresáøe ve svém domovském "
-"adresáøi?\n"
-"Pokud to povolíte, u¾ivatelùm staèí pouze kliknout na \"Sdílet\" v "
-"aplikacích konqueror a nautilus.\n"
-"\n"
-"Lze také provést \"Vlastní\" povolení pro jednotlivé u¾ivatele.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Zru¹it"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Spustit userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Sdílení mezi u¾ivateli pou¾ívá skupinu \"fileshare\". \n"
-"U¾ivatele lze do této skupiny pøidat pomocí nástroje userdrake."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dveøe dokoøán"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Slabá"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardní"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Vysoká"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Vy¹¹í"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidní"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Tato úroveò musí být pou¾ita s rozmyslem. Sice mù¾ete snadnìji pou¾ívat "
-"svùj\n"
-"systém, ale na druhou stranu je velmi citlivý: Nesmí být pou¾it pro\n"
-"poèítaè pøipojený k Internetu. Pro pøihlá¹ení není zapotøebí ¾ádné heslo."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Hesla jsou nyní aktivní, ale stále nedoporuèuji pou¾ít tento poèítaè na síti."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Toto je standardní úroveò zabezpeèení pro poèítaè, který je pou¾íván jako "
-"klient pro pøipojení k internetu."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Existují zde nìkterá omezení a ka¾dou noc jsou spu¹tìny automatické testy."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"S touto bezpeènostní úrovní je mo¾né pou¾ívat poèítaè jako server.\n"
-"Bezpeènost je nyní dostateèná pro server s pøipojením mnoha klientù.\n"
-"Poznámka: pokud je poèítaè pou¾íván pouze jako klient pro pøipojení k "
-"Internetu, je lep¹í zvolit ni¾¹í úroveò."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Tato úroveò má vlastnosti pøedchozí úrovnì, ale systém je úplnì uzavøen.\n"
-"Zabezpeèení je nastaveno na maximum."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Zvolte si úroveò zabezpeèení"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Úroveò zabezpeèení"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Pou¾ít libsafe pro servery"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Knihovna, které zabraòuje útokùm proti pøeteèení bufferu nebo proti ¹patnému "
-"formátování øetìzcù."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Vita Vas %s, program pro start operacniho systemu!\n"
-"\n"
-"Vyberte si ze seznamu operacnich systemu nize nebo\n"
-"pockejte %d vterin pro automaticky start.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vita Vas GRUB, program pro vyber operacniho systemu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pro vyber polozek pouzijte klavesy %c a %c."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stisknete ENTER pro start vybraného OS, 'e' pro upravu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "spoustecich parametru, nebo 'c' pro prikazovou radku."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Vybrana polozka bude automaticky spustena za %d sekund."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "není dost místa v adresáøi /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Pracovní plocha"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Nabídka Start"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Zavádìcí program nelze nainstalovat na oddíl %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nápovìda zatím nedostupná.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Nastavení stylu zavádìní"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "_Soubor"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Soubor/_Konec"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Novìj¹í zatøídìný monitor "
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Novìj¹í monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradièní monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradièní Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Spustit Auroru pøi startu"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Re¾im Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Re¾im Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jako správce spou¹tìní nyní pou¾íváte %s.\n"
-"Pokud chcete spustit prùvodce nastavením, kliknìte na Konfigurovat."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurovat"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systémový re¾im"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Spustit X-Window pøi startu"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, nechci automatické pøihlá¹ení"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ano, chci automatické pøihlá¹ení s tímto (u¾ivatelem, desktopem)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nelze otevøít /etc/inittab pro ètení: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut(y)"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Nelze provést sejmutí obrazovky pøed rozdìlením diskù"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Sejmuté obrazovvky budou dostupné po instalaci v adresáøi %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francie"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgie"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Èeská republika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Nìmecko"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Øecko"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norsko"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "©védsko"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozemí"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Itálie"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Rakousko"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Spojené státy americké"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Zálohujte si nejdøív svá data, prosím"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Ètìte pozornì!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jestli¾e chcete pou¾ívat aboot, musíte nechat volné místo na zaèátku disku\n"
-"(2048 sektorù staèí)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Chyba"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Prùvodce"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Co udìláte ?"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Máte jeden veliký oddíl FAT\n"
-"(vìt¹inou pou¾ívaný Microsoft Dos/Windows).\n"
-"Doporuèuji vám nejprve zmen¹it tento oddíl\n"
-"(klepnìte na nìj a potom na\n"
-"\"Zmìnit velikost\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Prosím klepnìte na oddíl"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaily"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "®urnálovací FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOs"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Odkládací (swap)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prázdný"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Dal¹í"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Souborové systémy:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Vytvoøit"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Zmìnit typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Místo toho pou¾ijte ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Smazat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Nejprve pou¾ijte ``Odpojit''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Tím ¾e zmìníte typ oddílu %s pøijdete o v¹echna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Vyberte oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Vyberte jiný oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Konec"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Pøepnout se do módu 'expert'"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Pøepnout se do módu 'normální'"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Zpìt"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Pøesto chcete pokraèovat?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Konec bez ulo¾ení"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Chcete skonèit bez zapsání do tabulky oddílù?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcete ulo¾it modifikaci souboru /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automaticky rozmístit"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "V¹e smazat"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informace o hardisku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "V¹echny primární oddíly (partitions) jsou pou¾ívány"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nemù¾u pøidat ¾ádný dal¹í oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Abyste mohli mít více oddílù, musíte smazat jeden existující a na jeho "
-"místì\n"
-"vytvoøit roz¹íøený(extended) oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Ulo¾it tabulku oddílù"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Obnovit tabulku oddílù"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Záchrana tabulky oddílù"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Znovu naèíst tabulku oddílù"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatické pøipojování pro vyjímatelná média"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Zvolit soubor"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Zálo¾ní tabulka oddílù nemá stejnou velikost\n"
-"Chcete pøesto chcete pokraèovat?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varování"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vlo¾te disketu do mechaniky\n"
-"V¹echna data na této disketì budou smazána"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pokou¹ím se obnovit tabulku oddílù"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Podrobné informace"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Pøípojný bod"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Volby"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Zmìnit velikost"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Pøesunout"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formátovat"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Pøipojit"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Pøidat do RAIDu"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Pøidat do LVMu"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odpojit"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Odebrat z RAIDu"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Odebrat z LVMu"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Zmìnit RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Pou¾ít loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Vytvoøit nový oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Poèáteèní sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Souborový systém: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Adresáø pøipojení (mount point): "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Nastavení: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Odstranit soubor loopbacku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Zmìnit typ oddílu"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Který souborový systém chcete pou¾ít?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Pøepínám z ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam chcete pøipojit loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam chcete pøipojit zaøízení %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nemù¾u smazat pøípojný bod, proto¾e tento oddíl je pou¾íván pro loopback.\n"
-"Odstraòte nejprve loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Poèítám hranice souborového systému fat"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mìním velikost"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Na tomto diskovém oddílu nelze mìnit velikost"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "V¹echna data z tohoto oddílu by mìla být zálohována"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Kdy¾ zmìníte velikost oddílu %s, ztratíte tím v¹echna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Zvolte novou velikost"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nová velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na který disk chcete oddíl pøesunout?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na který sektor chcete oddíl pøesunout?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Pøesouvám"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Pøesouvám oddíl..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Zvolte existující RAID pro pøidání"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nový"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Zvolte existující LVM pro pøidání"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Jméno pro LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Tento oddíl nemù¾e být pou¾it pro loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Název souboru loopbacku:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Zadejte jméno souboru"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Soubor u¾ je pou¾íván jiným loopbackem, zvolte si jiný"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Soubor u¾ existuje. Mám ho pou¾ít?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Volby pro pøipojení"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Dal¹í"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "zaøízení"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "úroveò"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Velikost bloku(chunk)"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Buïte opatrní: tato akce je nebezpeèná."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Jaký typ diskového oddílu?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Promiòte, nemù¾u povolit vytvoøení /boot tak daleko na disku (na cylindru > "
-"1024).\n"
-"Buïto pou¾ijete LILO a nebude to fungovat, nebo nepou¾ijete LILO a tedy "
-"nepotøebujete /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Oddíl který jste zvolili jako koøenový (root - /) je na disku fyzicky za "
-"cylindrem 1024,\n"
-"a pøitom nemáte /boot oddíl. Jestli¾e chcete pou¾ít správce bootu (boot "
-"manager),\n"
-"pøidejte je¹tì /boot oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Zvolili jste softwarovou RAID oddíl jako koøenový oddíl (/).\n"
-"S tím se není schopný vypoøádat ¾ádný zavádìcí program bez pou¾ití oddílu\n"
-"/boot. Ujistìte se prosím, ¾e tento oddíl máte."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Nová tabulka oddílù na disku %s bude zapsána!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby se zmìny uplatnily budete muset restartovat poèítaè"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kdy¾ naformátujete oddíl %s, ztratíte tím v¹echna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formátuji"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formátuji soubor loopbacku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formátuji oddíl %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Schovat soubory"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Pøesunout soubory na nový diskový oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Adresáø %s ji¾ obsahuje nìjaká data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Pøesunuji soubory na nový diskový oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopíruji %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Odstraòuji %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "oddíl %s je nyní rozpoznán jako %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Zaøízení: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Písmeno v DOSu: %s (jenom odhad)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Jméno: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Zaèátek: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorù"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Od cylindru %d do cylindru %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Naformátovaný\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nenaformátovaný\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Pøipojený\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback soubor(y): \n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standardní startovací oddíl\n"
-"    (Pro MS-DOS, ne pro LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Úroveò %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost bloku(chunk) %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback soubor: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Tento oddíl je oddíl\n"
-"s ovladaèi, je lep¹í\n"
-"no nechat neporu¹ený.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento speciální Boostrap\n"
-"oddíl je pro spu¹tìní\n"
-"dal¹ího systému.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylindrù, %s hlav, %s sektorù\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informace: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabulky oddílù: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na sbìrnici %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Volby: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Klíè pro kryptovaný souborový systém"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Vyberte si kryptovací klíè pro souborový systém"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Tento klíè je pøíli¹ jednoduchý (musí být alespoò %d znakù dlouhý)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Kryptovací klíèe se neshodují"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Kryptovací klíè"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Kryptovací klíè (znovu)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Zmìnit typ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Prosím klepnìte na zdroj"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Vyhledat servery"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formátování %s skonèilo chybou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "nevím jak naformátovat %s na typ %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "pøipojení oddílu %s v adresáøi %s selhalo"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "selhal bìh fsck s návratovým kódem %d nebo signálem %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojování %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednoduchý"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "s /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nemù¾ete pou¾ít JFS pro oddíl men¹í ne¾ 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nemù¾ete pou¾ít ReiserFS pro oddíl men¹í ne¾ 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Pøípojné body (mount points) musí zaèínat '/'"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Oddíl s pøípojným bodem %s u¾ existuje\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nelze pou¾ít LVM Logického disku na pøipojený bod %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adresáø musí kromì koøenového souborového systému zùstat"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Pro tento pøípojný bod potøebujete opravdový souborový systém (Ext2, "
-"ReiserFS)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nelze pou¾ít kryptovaný souborový systém na pøipojený bod %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Není dostatek místa pro automatické rozdìlení disku"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nic nedìlat"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba pøi otevírání %s pro zápis: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Stala se chyba - nebylo nalezeno ¾ádné zaøízení na kterém by se daly "
-"vytvoøit nové souborové systémy. Zkontrolujte prosím hardware"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemáte ¾ádné oddíly!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je víceu¾ivatelský systém, co¾ znamená, ¾e ka¾dý u¾ivatel mù¾e "
-"mít\n"
-"své vlastní nastavení, soubory atd. Více se doètete v \"Pøíruèce u¾ivatele"
-"\".\n"
-"Na rozdíl od u¾ivatele root, který se správcem poèítaèe, u¾ivatelé, kteøí "
-"jsou\n"
-"zde vytvoøeni, nemají oprávnìní mìnit nic kromì svých souborù a nastavení.\n"
-"Doporuèuje se vytvoøit úèet pro minimálnì jednoho regulérního u¾ivatele.\n"
-"Tento úèet se pou¾ívá na v¹echny bì¾né úkoly. Aèkoliv je velmi praktické\n"
-"pøihla¹ovat se ka¾dý den jako u¾ivatel Root, je to také velmi nebezpeèné!\n"
-"Jedna malá chyba mù¾e zpùsobit to, ¾e celý operaèní systém nebude funkèní.\n"
-"Pokud udìláte chybu jako normální u¾ivatel, mù¾ete pøijít o soubory, ale "
-"nepo¹kodí\n"
-"se celý systém.\n"
-"\n"
-"Jako první zadejte reálné jméno. Není to povinné, tak¾e mù¾ete zadat co "
-"chcete\n"
-"a drakX pou¾ije první slovo jako u¾ivatelské jméno, pod kterým se bude "
-"u¾ivatel\n"
-"hlásit do systému. Je mo¾né ho následnì zmìnit. Dále se zadává heslo pro\n"
-"u¾ivatele. Volba hesla pro normální u¾ivatele sice není tak kritická jako\n"
-"pro správce, ale i tak se doporuèuje nepodceòovat bezpeènost.\n"
-"\n"
-"Pokud kliknete na \"Pøidat u¾ivatele\", mù¾ete tak pøidávat u¾ivatelù kolik\n"
-"potøebujete, napø. své pøátelé, úèet pro otce èi sestru. Pokud máte v¹echny\n"
-"u¾ivatele vytvoøeny, kliknìte na \"Hotovo\". \n"
-"\n"
-"Kliknutím na tlaèítko \"Roz¹íøené\" mù¾ete pro nový úèet zmìnit shell, "
-"který\n"
-"u¾ivatel bude pou¾ívat (výchozí je bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ka¾dý oddíl vypsaný ní¾e má: \"Jméno\", \"Velikost\".\n"
-"\n"
-"\"Jméno\" je slo¾eno následovnì: \"typ pevného disku\", \"èíslo disku\",\n"
-"\"èíslo oddílu\". (napøíklad \"hda1\").\n"
-"\n"
-"Pokud máte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud máte SCSI,\n"
-"oznaèení bude \"sd\".\n"
-"\n"
-"\"Èíslo disku\" je v¾dy písmeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE øadièi\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE øadièi\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE øadièi\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE øadièi\".\n"
-"\n"
-"Pro SCSI disky platí, ¾e \"a\" je \"nejmen¹í SCSI ID\", \"b\" je \"druhé\n"
-"nejmen¹í SCSI ID\" atd."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Distribuce Mandrake Linux je slo¾ena z nìkolika CD. Instalaèní program ví,\n"
-"na kterém disku je umístìn jaký soubor a v pøípadì potøeby vysune CD a "
-"vy¾ádá\n"
-"si výmìnu CD za jiné."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"V této chvíli je mo¾né si vybrat, které programy chcete nainstalovat.\n"
-"Mandrake Linux obsahuje témìø tisíc balíèkù s programy a urèitì nebudete\n"
-"potøebovat v¹echny.\n"
-"\n"
-"Pokud instalujete z CDROM, budete nejprve dotázáni na to, jaká CD máte\n"
-"(pouze Expertní re¾im). Oznaète ty CD, která máte a která chcete pou¾ít \n"
-"pro instalaci. Po výbìru kliknìte na \"OK\".\n"
-"\n"
-"Balíèky jsou rozdìleny do skupin, které odpovídají tomu, jak je nejèastìji\n"
-"poèítaè pou¾íván. Skupiny jsou umístìny do ètyøech sekcí:\n"
-"\n"
-" * \"Pracovní stanice\": pokud plánujete pou¾ívat poèítaè pøevá¾nì na\n"
-"bì¾nou práci, vyberte si z dal¹ích skupin odpovídající balíèky.\n"
-"\n"
-" * \"Vývoj\": pokud budete na poèítaèi programovat, mù¾ete si z této\n"
-"sekce vybrat dal¹í skupiny.\n"
-"\n"
-" * \"Server\": pokud bude poèítaè provozován jako server, máte mo¾nost\n"
-"vybrat si ty nejbì¾nìj¹í slu¾by, které chcete nainstalovat.\n"
-"\n"
-" * \"Grafická prostøedí\": pokud preferujete grafické prostøedí, zde je\n"
-"nabídka nìkolika prostøedí, ze které si musíte vybrat nejménì jedno,\n"
-"aby bylo mo¾né grafické prostøedí nainstalovat.\n"
-"\n"
-"Pokud pøejedete my¹í nad skupinou, objeví se krátký text, který vysvìtluje,\n"
-"co je obsahem dané skupiny. Pokud nevyberete pøi instalaci ¾ádnou skupinu,\n"
-"zobrazí se otázka na instalaci nìkolika typù minimální instalace:\n"
-"\n"
-" * \"Podpora X\" Provede instalaci minimální podpory pro prostøedí X-"
-"Window.\n"
-"\n"
-" * \"Se základní dokumentací\" Nainstaluje systém se základními programy a "
-"jejich dokumentací. Tento typ je vhodný pro instalaci serveru.\n"
-"\n"
-" * \"Minimální instalace\" Nainstaluje se opravdu nezbytné minimum aby bylo "
-"mo¾né provozovat Linux z pøíkazové øádky. Instalace zabere asi 65MB.\n"
-"\n"
-"Pokud zatrhnete volbu \"Vlastní výbìr balíèkù\", zobrazí se seznam v¹ech\n"
-"balíèkù, které je mo¾no nainstalovat. Je to dobré v tom pøípadì, ¾e chcete\n"
-"mít kontrolu nad tím, co se bude instalovat.\n"
-"\n"
-"Pokud jste spustili instalaci v re¾imu \"Aktualizace\", mù¾ete zru¹it výbìr\n"
-"daných skupin, èím¾ zabráníte instalaci nových balíèkù. To je u¾iteèné\n"
-"pro pøípad opravy existujícího systému."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"V závislosti na tom, zda jste zvolili individuální výbìt balíèkù, nabídne\n"
-"se stromová struktura, obsahující v¹echny balíèky organizované do skupin.\n"
-"Pøi procházení stromu mù¾ete vybrat jednotlivé balíèky nebo celé skupiny.\n"
-"\n"
-"Pokud vyberete balíèek nebo skupinu, v pravé èásti se objeví popis.\n"
-"Pokud máte výbìr hotový, kliknìte na tlaèítko \"Instalovat\", které spustí\n"
-"instalaèní proces. Doba trvání instalace závisí poètu balíèkù a na "
-"rychlosti\n"
-"va¹eho poèítaèe. Zbývající èas je zobrazován na obrazovce, tak¾e máte\n"
-"odhad na to, zda si stihnete dát ¹álek kávy. :-)\n"
-"\n"
-"Pokud mezi vybranými balíèky jsou serverové programy, zobrazí se dotaz na "
-"to,\n"
-"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandrake Linux\n"
-"jsou tyto servery spu¹tìny pøi startu systému. I kdy¾ v dobì vydání "
-"distribuce\n"
-"nejsou známy ¾ádné bezpeènostní problémy, mohou se vyskytnout pozdìji.\n"
-"Pokud nevíte, k èemu jsou urèeny nìkteré serverové slu¾by, kliknìte na \"Ne"
-"\".\n"
-"Kliknutím na \"Ano\" se dané slu¾by nainstalují a spustí pøi startu!\n"
-"\n"
-"Volba \"Automatické závislosti\" odstraòuje varovné hlá¹ení, které se "
-"objeví\n"
-"v¾dy, kdy¾ vyberete balíèek, který má dal¹í závislosti a instalaèní program\n"
-"tak musí vybrat dal¹í potøebné balíèky.\n"
-"\n"
-"Malá ikonka diskety umo¾òuje nahrát ji¾ pøedtím vybraný seznam balíèkù.\n"
-"Kliknìte na ikonu a vlo¾te disketu s ulo¾eným výbìrem. V posledním kroku\n"
-"bude návod, jak si tuto disketu vytvoøit."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"V tomto kroku se provede nastavení pøipojení k internetu/síti. Pokud chcete\n"
-"pøipojit svùj poèítaè k místní síti nebo k internetu, klepnìte na \"OK\"\n"
-"a spustí se automatická detekce sí»ové karty nebo modemu. Pokud tato\n"
-"detekce sel¾e, odznaète pøi dal¹ím pokusu \"Pou¾ít automatickou detekci"
-"\"Pokud nechcete nyní nastavit sí» nebo to chcete provést pozdìji, "
-"jednodu¹e\n"
-"klepnìte na tlaèítko \"Zru¹it\".\n"
-"Zpùsoby pøipojení jsou: tradièní modem, ISDN modem, ADSL spojení, kabelový\n"
-"modem a koneènì klasické pøipojení do LAN sítì (Ethernet).\n"
-"\n"
-"Ujistìte se, ¾e máte v¹echny dostupné informace pro pøipojení od svého\n"
-"poskytovatele pøipojení nebo od správce sítì. \n"
-"\n"
-"Více informací naleznete v pøíslu¹né kapitole v manuálu, nebo mù¾ete systém\n"
-"nainstalovat a pou¾ít programy na konfiguraci pøipojení pozdìji.\n"
-"\n"
-"Pokud nemáte ¾ádné pøipojení k internetu ani k místní síti, klepnìte na\n"
-"\"Zru¹it\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nyní si zvolte, které slu¾by mají být spu¹tìny pøi startu poèítaèe.\n"
-"\n"
-"Je zde seznam v¹ech slu¾eb, které jsou aktuálnì nainstalovány.\n"
-"Prohlédnìte si seznam pozornì a zru¹te ty, které nepotøebujete spou¹tìt pøi\n"
-"startu poèítaèe.\n"
-"\n"
-"Pokud pøejedete my¹í nad nìkterou polo¾kou, objeví se malá nápovìda\n"
-"s popisem, co daná slu¾ba dìlá. Pokud pøesnì nevíte, zda je slu¾ba u¾iteèná\n"
-"nebo ne, je lep¹í ji nechat ve výchozím stavu.\n"
-"\n"
-"Rozva¾te, co za slu¾by spustit, zvlá¹tì pokud budete poèítaè provozovat\n"
-"jako server: nepotøebujete v¹echny slu¾by. Pamatujte, ¾e èím více slu¾eb\n"
-"je spu¹tìno, tím je vìt¹í nebezpeèí ne¾ádoucího proniknutí do poèítaèe.\n"
-"Tak¾e povolte opravdu jen ty slu¾by, které nezbytnì potøebujete."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux spravuje èas podle GMT (Greenwich Mean Time) a pøevádí ho na\n"
-"èas podle pøíslu¹né vybrané èasové zóny. Toto je mo¾né zru¹it odznaèením\n"
-"volby \"Hodiny nastaveny na GMT\" a tak budou systémové hodiny stejné jako\n"
-"hardwarové. To je dobré v tom pøípadì, ¾e na poèítaèi je jiný operaèní "
-"systém\n"
-"typu Windows.\n"
-"\n"
-"Volba \"Automatická synchronizace èasu\" provádí automatické nastavení "
-"hodin\n"
-"pøipojením se k èasovému serveru na internetu. Vyberte si v seznamu ten "
-"server,\n"
-"který je vám nejblí¾. Je zamoøejmé, ¾e pro správnou funkci musíte mít "
-"fukèní\n"
-"pøipojení k internetu. Na poèítaè se také nainstaluje èasový server, který\n"
-"mohou pou¾ívat jiné poèítaèe ve va¹í lokální síti."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X Window System (zkrácenì X) je srdcem grafického rozhraní GNU/Linuxu,\n"
-"na kterém jsou provozovány grafická prostøedí (KDE,Gnome,AfterStep, "
-"WindowMaker)\n"
-"V této sekci se DrakX pokusí nakonfigurovat X automaticky.\n"
-"\n"
-"Existují pøípady, kdy se automatická detekce nezdaøí. Je to v pøípadech, ¾e\n"
-"je daný hardware velmi starý (nebo velmi nový). Pokud se detekce podaøí,\n"
-"spustí se grafické prostøedí v nejlep¹ím mo¾ném rozli¹ení v závislosti na "
-"monitoru. Probìhne test, kdy se zobrazí okno s otázkou, zda je v¹e správnì\n"
-"zobrazeno.\n"
-"\n"
-"Pokud provádíte \"Expertní\" instalaci, spustí se prùvodce konfigurací X "
-"Window. Více informací o prùvodci naleznete v odpovídající sekci v manuálu.\n"
-"\n"
-"Pokud pøi testu nastavení uvidíte zprávu dobøe, odpovìzte \"Yes\" a "
-"instalace\n"
-"pokraèuje dal¹ím krokem.\n"
-"Pokud nic neuvidíte, test automaticky skonèí za 10 vteøin a obnoví se\n"
-"obrazovka."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Mù¾e se stát, ¾e pøi prvním testu nebude zvoleno nejoptimálnìj¹í rozli¹ení\n"
-"(obrazovka je pøíli¹ malá, je posunuta doprava èi doleva...) V této chvíli "
-"se\n"
-"instalaèní program dotá¾e, jaké rozli¹ení si pøejete a nabídne seznam\n"
-"pou¾itelných rozli¹ení.\n"
-"\n"
-"Pokud se nepodaøí X Window korektnì spustit, vyberte se z nabídky \"Zmìnit"
-"\"\n"
-"grafickou kartu, vyberte \"Neznámá karta\" a pøi otázce na výbìr serveru "
-"odpovìzte\n"
-"\"FBDev\". Tato volba dovoluje pøi potí¾ích spustit X Window na v¹ech\n"
-"moderních grafických kartách. Potom \"Znova otestovat\" pro ovìøení."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Poslední otázka je na to, zda chcete spustit grafické prostøedí pøi startu.\n"
-"Tato otázka se zobrazí i v pøípadì, ¾e nastavení pøedtím neotestujete.\n"
-"Je zøejmé, ¾e odpovíte \"Ne\" v pøípadì, ¾e poèítaè bude pracovat\n"
-"jako server nebo v pøípadì, ¾e se nepodaøilo správnì nastavit grafickou "
-"kartu."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"CDROM s distribucí Mandrake Linux má zabudovaný záchranný re¾im. Mù¾ete ho\n"
-"spustit pøímo pøi spu¹tìní z CD, kdy stisknete klávesu >>F1<< a na "
-"pøíkazový\n"
-"øádek napí¹ete >>rescue<<. Pokud poèítaè neumo¾òuje bootovat z CD, potom\n"
-"v tomto kroku najdete øe¹ení na následující situace:\n"
-"\n"
-" * pokud pou¾íváte zavádìcí program, DrakX pøepí¹e zavádìcí sektor (MBR) na\n"
-"pevném disku (pokud nepou¾íváte jiný zavádìcí program) aby umo¾nil start "
-"buï\n"
-"Windows nebo GNU/Linuxu (pokud máte Windows na poèítaèi nainstalovány).\n"
-"Pokud potøebujete Windows pøeinstalovat, instalaèní program Microsoftu "
-"pøepí¹e\n"
-"zavádìcí sektor a nemáte tak mo¾nost spustit GNU/Linux!\n"
-"\n"
-" * pokud se objeví problémy a není mo¾né spustit GNU/Linux z pevného disku,\n"
-"je disketa jedinou mo¾ností, jak systém spustit. Obsahuje základní "
-"systémové\n"
-"nástroje na obnovení systému buï pøí výpadku napájení, chybì v hesle nebo\n"
-"z jiných dùvodù.\n"
-"\n"
-"Pokud zvolíte tento krok, musíte vlo¾it disketu do mechaniky. Disketa musí\n"
-"být prázdná, nebo na ní mohou být data, která ji¾ nepotøebujete. Následnì "
-"se\n"
-"provede formát diskety a DrakX celý její obsah pøepí¹e."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"V tomto bodì si musíte definovat, na které diskové oddíly budete\n"
-"instalovat nový operaèní systém Mandrake Linux. Pokud je disk prázdný\n"
-"nebo existující operaèní systém pou¾ívá celý disk, je nutné ho rozdìlit.\n"
-"Rozdìlení disku spoèívá ve vytvoøení volného prostoru pro instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Proto¾e rozdìlení disku je nenávratná operace, je to velmi nebezpeèná\n"
-"akce pro ty u¾ivatele, kteøí nemají ¾ádné zku¹enosti.\n"
-"Pro tyto u¾ivatele je dobrý prùvodce, který zjednodu¹í daný proces.\n"
-"Je¹tì pøed zapoèetím rozdìlování disku si proètìte manuál.\n"
-"\n"
-"Pokud máte zvolený Expertní re¾im, spustil se nástroj na práci s diskem: "
-"Diskdrake, který umo¾òuje lépe nastavit diskové oddíly. Pokud chcete pou¾ít\n"
-"prùvodce, kliknìte na tlaèítko \"Prùvodce\".\n"
-"\n"
-"Pokud máte ji¾ vytvoøeny diskové oddíly z pøedchozích instalací nebo\n"
-"od jiných diskových nástrojù, lze je nyní pou¾ít pro instalaci.\n"
-"\n"
-"Pokud nejsou definovány ¾ádné diskové oddíly, je nutné je vytvoøit.\n"
-"K tomu slou¾í prùvodce, který nabídne nìkolik øe¹ení:\n"
-"\n"
-" * \"Pou¾ít volný prostor\": takto se jednodu¹e automaticky disk(y) rozdìlí\n"
-"a ji¾ se o nic nemusíte starat.\n"
-"\n"
-" * \"Pou¾ít existující oddíly\": prùvodce detekoval jeden nebo více "
-"existujících\n"
-"Linuxových oddílù a ty nabídne pro instalaci.\n"
-"\n"
-" * \"Pou¾ít volné místo na oddíle s Windows\": pokud máte na disku "
-"nainstalovány\n"
-"Microsoft Windows a zabírají celý disk, je mo¾né tento prostor zmen¹it \n"
-"a pou¾ít ho pro instalaci. Zmìna velikost oddílu je provedena bez ztráty "
-"dat.\n"
-"Tento postup je doporuèený, pokud chcete na disku provozovat jak systém\n"
-"Linux Mandrake tak i Microsoft Windows.\n"
-"\n"
-"   Pøed touto volbou si uvìdomte, ¾e velikost oddílu s Microsoft Windows\n"
-"bude men¹í ne¾ je nyní. To znamená, ¾e budete mít ménì místa pro \n"
-"instalaci programù do Microsoft Windows.\n"
-"\n"
-" * \"Zru¹it celý disk\": pokud chcete smazat ve¹kerá data a v¹echny oddíly\n"
-"na disku a pou¾ít je pro instalaci systému Mandrake Linux, vyberte toto\n"
-"øe¹ení. Zde postupujte opatrnì, po výbìru ji¾ není mo¾né vzít volbu zpìt.\n"
-"\n"
-"   !! Pokud zvolíte tuto mo¾nost, v¹echna data na disku budou ztracena.!!\n"
-"\n"
-" * \"Odstranit Windows\": takto se jednodu¹e sma¾e celý disk a bude se "
-"instalovat\n"
-"na celý disk- V¹echna data tak budou ztracena.\n"
-"\n"
-"    !! Pokud vyberete tuto volbu, ve¹kerá data budou ztracena. !!\n"
-"\n"
-" * \"Expertní re¾im\": pokud chcete disk rozdìlit ruènì. Pøed touto volbou "
-"buïte\n"
-"opatrní, je sice mocná, ale nebezpeèná.\n"
-"Nedoporuèuje se tìm, kteøí pøesnì nevìdí, co dìlají."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nyní je instalace ukonèena a operaèní systém GNU/Linux je pøipraven k "
-"pou¾ití.\n"
-"Kliknìte na \"OK\" a systém bude restartován. Potom mù¾ete spustit GNU/Linux "
-"nebo\n"
-"Windows, zále¾í který preferujete\n"
-"\n"
-"Tlaèítko \"Roz¹íøené\" zobrazí dal¹í dvì tlaèítka:\n"
-"\n"
-" * Generovat disketu pro automatickou instalaci: vytvoøí disketu, se kterou\n"
-"lze celou instalaci opakovat bez zásahu operátora se stejnými volbami,\n"
-"které byly zvoleny pøi instalaci.\n"
-"\n"
-"    Po kliknutí na toto tlaèítko se zobrazí dal¹í dvì volby:\n"
-"\n"
-"     * : Zopakovat: je to èásteènì automatická instalace, kdy se potvrzuje "
-"krok\n"
-"pøi rozdìlování diskù (a pouze tento krok).\n"
-"\n"
-"    * : Automaticky: plnì automatická instalace, data na pevném disku budou\n"
-"zru¹ena a disk pøepsán.\n"
-"\n"
-"   Tato volba je velmi u¾iteèná, kdy¾ potøebujete nainstalovat vìt¹í poèet\n"
-"stejných poèítaèù. Více o této mo¾nosti je na na¹ich WWW stránkách.\n"
-"\n"
-" * Ulo¾it výbìr balíèkù(*): ulo¾í výbìr balíèkù, který byl zvolen pøi "
-"instalaci.\n"
-"Pokud budete instalovat dal¹í poèítaè, vlo¾te disketu do mechaniky a "
-"spus»te\n"
-"instalaci, stisknìte [F1] a napi¹te na pøíkazový øádek >linux defcfg=\"floppy"
-"\"<.\n"
-"\n"
-"(*) Potøebujete disketu formátovanou FAT (Pod Linuxem ji vytvoøíte pøíkazem\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Ka¾dý novì vytvoøený diskový oddíl musí být pøed pou¾itím zformátován\n"
-"(formátováním se myslí vytvoøení souborového systému).\n"
-"\n"
-"Nyní lze formátovat ji¾ existující diskové oddíly pro vymazání\n"
-"v¹ech dat, která obsahují. Pokud to chcete provést, vyberte diskové oddíly\n"
-"pro pøeformátování.\n"
-"\n"
-"Není ale nutné pøeformátovat v¹echny ji¾ existující diskové oddíly.\n"
-"Je nutné pøeformátovat oddíly, které obsahují operaèní systém (jako je \"/"
-"\",\n"
-"\"/usr\" nebo \"/var\") ale není nutné pøeformátovat oddíly, které obsahují\n"
-"data, která chcete zachovat (typicky /home).\n"
-"\n"
-"Pøi výbìru diskových oddílù, které se budou formátovat buïte opatrní, "
-"v¹echna\n"
-"data na formátovaných oddílech budou ztracena a nelze je ji¾ obnovit.\n"
-"\n"
-"Pokud je v¹e pøipraveno pro formátování, kliknìte na \"OK\".\n"
-"\n"
-"Kliknìte na \"Zru¹it\" pokud chcete vybrat jiné oddíly pro instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Kliknutím na \"Roz¹íøené\" mù¾ete vybrat, které oddílz budou otestovány\n"
-"na vadné bloky."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Nyní zaène nová instalace operaèního systému Mandrake Linux.\n"
-"Tato operace mù¾e trvat nìkolik desítek minut (zále¾í na mno¾ství balíèkù,\n"
-"které jste si vybrali pro instalaci a rychlosti va¹eho poèítaèe).\n"
-"\n"
-"Mìjte prosím trpìlivost a vyèkejte."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Poka¾dé, kdy¾ instalujete Mandrake Linux, je mo¾né, ¾e nìkteré balíèky byly\n"
-"od vydání distribuce aktualizovány. Mohly to být opravy chyb èi øe¹ení "
-"mo¾ných\n"
-"bezpeènostních problémù. Pokud chcete vyu¾ít právì této nabídky, je mo¾né\n"
-"je nyní stáhnout z internetu. Zvolte \"Ano\" pokud máte funkèní pøipojení "
-"na\n"
-"internet nebo \"Ne\" pokud budete instalovat aktualizace pozdìji.\n"
-"\n"
-"Po zvolení \"Ano\" se zobrazí seznam míst, odkud mohou být aktualizace "
-"získány.\n"
-"Vyberte si nejbli¾¹í místo. Následnì se objeví stromový seznam balíèkù, "
-"který\n"
-"je mo¾no je¹tì upravit a stisknutím tlaèítka \"Instalovat\" se provede "
-"sta¾ení\n"
-"a instalace vybraných balíèkù. Akci mù¾ete pøeru¹it klepnutím na \"Zru¹it\"."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Pøedtím, ne¾ budete pokraèovat, pøeètìte si pozornì podmínky licence. Ty\n"
-"se vztahují k celé distribuci Mandrake Linux a pokud s nimi nesouhlasíte,\n"
-"kliknìte na tlaèítko \"Odmítnout\". Instalace ihned skonèí. Pokud chcete "
-"pokraèovat\n"
-"v instalaci, kliknìte na tlaèítko \"Potvrdit\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nyní si vyberte úroveò zabezpeèení va¹eho poèítaèe Je zøejmé, ¾e èím více "
-"je\n"
-"poèítaè vyu¾íván a èím cennìj¹í data obsahuje, tím je potøeba zvolit vy¹¹í\n"
-"úroveò. Na druhou stranu, vy¹¹í úroveò znesnadòuje nìkteré obvyklé postupy.\n"
-"Více informací o úrovních bezpeènosti se doètete v kapitole MSEC v "
-"referenèní\n"
-"pøíruèce. \n"
-"Pokud nevíte co vybrat, ponechte výchozí nastavení."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"V této chvíli je potøebné urèit, který(é) oddíl(y) budou pou¾ity pro "
-"instalaci\n"
-"systému Mandrake Linux. Pokud byly oddíly ji¾ jednou definovány, buï\n"
-"z pøedchozí instalace GNU/Linux nebo jiným programem na rozdìlení disku,\n"
-"je mo¾né pou¾ít právì tyto oddíly. Jinak musí být oddíly novì definovány.\n"
-"\n"
-"Pro vytvoøení oddílu musíte nejdøíve vybrat pevný disk. Kliknìte na \n"
-"\"hda\", co¾ je první IDE disk, nebo na \"hdb\", co¾ je druhý disk,\n"
-"pøípadnì na \"sda\", co¾ je první SCSI disk.\n"
-"\n"
-"Pro rozdìlení vybraného disku mù¾ete pou¾ít tyto volby:\n"
-"\n"
-" * \"V¹e smazat\": tato volba sma¾e v¹echny oddíly na disku.\n"
-"\n"
-" * \"Automaticky rozmístit\": dojde k automatickému vytvoøení oddílu pro\n"
-"Ext2 a swap ve volném prostoru disku.\n"
-"\n"
-" * \"Více\": nabídne dal¹í mo¾nosti:\n"
-"\n"
-"    * \"Ulo¾it tabulku na disketu\": ulo¾í tabulku oddílù na disketu. To je\n"
-"vhodné pro pøípad po¹kození tabulky, kdy ji lze z této zálohy obnovit.\n"
-"Doporuèujeme vyu¾ít tuto mo¾nost.\n"
-"\n"
-"    * \"Obnovit z diskety\": obnoví tabulku oddílù, která byla ji¾ døíve\n"
-"ulo¾ena na disketu.\n"
-"\n"
-"    * \"Záchrana tabulky oddílù\": pokud je tabulka po¹kozena, mù¾ete se\n"
-"pokusit ji opravit. Buïte ale opatrní a pamatujte na to, ¾e se to nemusí "
-"v¾dy\n"
-"podaøit.\n"
-"\n"
-" * \"Znovu naèíst\": zru¹í v¹echny zmìny a nahraje pùvodní tabulku oddílù.\n"
-"\n"
-"    \"pøipojovat vyjímatelná média\": odznaèením této volby zpùsobí, ¾e pøi\n"
-"pøipojování a odpojování vyjímatelných médií jako jsou CD-ROM disky a "
-"floppy\n"
-"disky je nutné pou¾ít ruènì pøíkaz mount.\n"
-"\n"
-" * \"Prùvodce\": pokud nemáte dobré znalosti o rozdìlování diskù, pou¾ijte\n"
-"tuto volbu, kdy se spustí prùvodce.\n"
-"\n"
-" * \"Odvolat\": zru¹í v¹echny provedené zmìny.\n"
-"\n"
-" * \"Pøepnout normální/expertní re¾im\": dovoluje dal¹í akce s oddíly\n"
-"(typ oddílu, volby, formátování) a zobrazí dal¹í informace.\n"
-" * \"Hotovo\": pokud máte disk rozdìlen, ulo¾í se zmìny na disk.\n"
-"\n"
-"Poznámka: ka¾dou volbu je mo¾né zadat také z klávesnice. Mezi oddíly se\n"
-"mù¾ete pohybovat pomocí kláves [Tab] a [©ipka nahoru/¹ipka dolù].\n"
-"\n"
-"Pokud je vybrán oddíl, lze pou¾ít tyto volby:\n"
-"\n"
-" * Ctrl-c pro vytvoøení nového oddílu (pokud je vybrán prázdný oddíl);\n"
-"\n"
-" * Ctrl-d pro smazání oddílu;\n"
-"\n"
-" * Ctrl-m pro zadání bodu pøipojení.\n"
-"\n"
-"Více informací o jednotlivých druzích souborových systémù naleznete\n"
-"v kapitole o ext2fs v \"Referenèní pøíruèce\".\n"
-"\n"
-"Pokud instalujete na poèítaè PPC, je potøeba vytvoøit malý oddíl HPFS,\n"
-"tzv. \"bootstrap\" o minimální velikosti 1MB, který bude pou¾it pro zavadìè\n"
-"yaboot. Pokud vytvoøíte tento oddíl vìt¹í, napø. 50 MB, je to dobré místo "
-"pro\n"
-"ulo¾ení ramdisku a jádra pro situace záchrany disku."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Instalaèní program nalezl na disku více ne¾ jeden oddíl s Microsoft "
-"Windows.\n"
-"Prosím vyberte si jeden z nich, který je potøeba zmen¹it pro novu instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Ka¾dý oddíl je zobrazen následovnì: \"Jméno pro Linux\",\n"
-"\"Jméno pro Windows\", \"Velikost\".\n"
-"\n"
-"\"Jméno pro Linux\" je slo¾eno následovnì: \"typ pevného disku\",\n"
-"\"èíslo disku\", \"èíslo oddílu\". (napøíklad \"hda1\").\n"
-"\n"
-"Pokud máte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud máte SCSI,\n"
-"oznaèení bude \"sd\".\n"
-"\n"
-"\"Èíslo disku\" je v¾dy písmeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE øadièi\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE øadièi\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE øadièi\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE øadièi\".\n"
-"\n"
-"Pro SCSI disky platí, ¾e \"a\" je \"nejmen¹í SCSI ID\", \"b\" je \"druhé\n"
-"nejmen¹í SCSI ID\" atd.\n"
-"\n"
-"\"Jméno pro Windows\" je písmeno, které je pou¾ito ve Windows\n"
-"(první oddíl nebo disk má písmeno \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Buïte trpìliví. Tato operace mù¾e trvat nìkolik minut."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Nyní se instalaèní program zeptá na to, zda chcete provést (\"Doporuèenou"
-"\")\n"
-"nebo (\"Expertní\") instalaci, která dovoluje vìt¹í kontrolu.\n"
-"Také si zde mù¾ete vybrat, zda chcete provést novou instalaci nebo "
-"aktualizaci\n"
-"ji¾ existující verze systému Mandrake Linux.:\n"
-"\n"
-" * \"Instalovat\" Kompletnì pøema¾e starou verzi. V závislosti na tom, co "
-"je\n"
-"na daném systému nainstalováno zùstanou jiné oddíly nezmìnìny.\n"
-"\n"
-" * \"Aktualizovat\" Provede aktualizaci instalovaného systému Mandrake "
-"Linux.\n"
-"Rozdìlení disku i ve¹kerá data u¾ivatelù zùstanou zachována. Jinak se "
-"provede\n"
-"témìø èistá instalace.\n"
-"\n"
-" * \"Aktualizovat pouze balíèky\" Provede aktualizaci balíèkù z pøedchozí\n"
-"verze bez dal¹ích zmìn. Je také mo¾né nainstalovat nové balíèky.\n"
-"\n"
-"Aktualizace je bezproblémová od verze Mandrake Linux 8.1\n"
-"\n"
-"V závislosti na va¹ich znalostech GNU/Linuxu si mù¾ete vybrat z "
-"následujících\n"
-"úrovní instalace operaèního systému Mandrake Linux:\n"
-"\n"
-"* Doporuèená: volte pokud jste je¹tì nikdy neinstalovali GNU/Linux. "
-"Instalace bude velmi jednoduchá a budete dotázáni pouze na nìkolik otázek.\n"
-"\n"
-"* Expertní: jestli¾e jste dobøe obeznámeni s GNU/Linuxem a chcete provést\n"
-"precizní nastavení instalace, je právì pro vás tato volba. Budete si moci\n"
-"pøesnì upravit celou instalaci. Odpovìdi na otázky budou velmi tì¾ké pro\n"
-"ty, kteøí nemají velmi dobré znalosti GNU/Linuxu.\n"
-"Nevolte tuto volbu, pokud pøesnì nevíte, co dìláte."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normálnì instalaèní program zvolí správnou klávesnici na základì zvoleného\n"
-"jazyka, tak¾e není potøeba nic v tomto kroku mìnit. \n"
-"Mù¾e se ale stát, ¾e nemáte klávesnici, která odpovídá va¹emu jazyku: "
-"napøíklad\n"
-"pokud jste anglicky hovoøící ©výcar, stejnì chcete mít ¹výcarskou "
-"klávesnici.\n"
-"Nebo pokud mluvíte anglicky ale ¾ijete v Quebecu, je to stejný pøípad. V "
-"obou\n"
-"pøípadech se mù¾ete na tento instalaèní krok a vybrat si odpovídající\n"
-"klávesnici ze seznamu.\n"
-"\n"
-"Pokud máte klávesnici pro jiný jazyk, kliknìte na tlaèítko \"Více\"\n"
-"a zobrazí se kompletní seznam v¹ech podporovaných rozlo¾ení klávesnic."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Vyberte si prosím vámi preferovaný jazyk, který se bude pou¾ívat pøi "
-"instalaci\n"
-"a v celém systému.\n"
-"\n"
-"Tlaèítko \"Roz¹íøené\" umo¾òuje zvolit dal¹í jazyky, které budou také "
-"nainstalovány\n"
-"a mù¾ete je pou¾ít v systému. Pokud napøíklad na poèítaèi pracují obèas "
-"lidé\n"
-"ze ©panìlska, vyberte angliètinu jako hlavní jazyk a pod tlaèítkem "
-"roz¹íøené\n"
-"zatrhnìte volbu \"©panìl¹tina\".\n"
-"\n"
-"Pokud máte jazyk vybrán, kliknìte na \"OK\" a instalace bude pokraèovat\n"
-"dal¹ím krokem."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX zjistil, ¾e máte dvou tlaèítkovou my¹ a nastaví emulaci pro tøetí "
-"tlaèítko.\n"
-"Taky umí rozpoznat, zda je my¹ PS/2, USB nebo sériová.\n"
-"\n"
-"Pokud chcete zadat jiný typ my¹i, vyberte odpovídající typ se seznamu.\n"
-"\n"
-"Pokud vyberete jinou my¹ ne¾ ta, která byla detekována, zobrazí se "
-"testovací\n"
-"obrazovka. Zde otestujte jak tlaèítka tak i koleèko, zda je nastavení "
-"správné.\n"
-"Pokud my¹ nepracuje správnì, stisknìte mezerník nebo ENTER na \"Zru¹it\"\n"
-"a vyberte jiný typ."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vyberte prosím správný port. Napøíklad \"COM1\" pod MS Windows se\n"
-"v Linuxu jmenuje \"ttyS0\"."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Následující rozhodnutí je jedním z tìch, které ovlivòují celkovou "
-"bezpeènost\n"
-"systému GNU/Linux, tj. volba hesla pro u¾ivatele \"Root\". Root je "
-"administrátorem\n"
-"systému, je odpovìdný za provádìní aktualizací, pøidávání u¾ivatelù a také\n"
-"za celkovou konfiguraci systému. Zkrácenì: root mù¾e úplnì v¹echno!\n"
-"To je také dùvodem, proè se heslo volí takové, aby se nedalo lehce uhodnout\n"
-"a instalaèní program zkontroluje, zda není pøíli¹ jednoduché. Jak vidíte, "
-"je\n"
-"mo¾né mít úèet bez hesla, ale velmi dùraznì doporuèujeme nìjaké heslo "
-"zadat,\n"
-"z jednoho dùvodu. Nemyslete si, ¾e pokud spustíte GNU/Linux, ¾e nemù¾ete\n"
-"udìlat u¾ ¾ádnou chybu. U¾ivatel root mù¾e nenávratnì po¹kodit celý systém,\n"
-"vymazat potøebné soubory, atd.\n"
-"\n"
-"Zvolené heslo by se mìlo skládat ze znakù a èíslic a melo by být minimálnì "
-"8\n"
-"znakù dlouhé. Také není dobré si ho kamkoliv poznamenávat.\n"
-"\n"
-"Nevolte heslo pøíli¹ dlouhé nebo komplikované, bude nutné si jej pamatovat.\n"
-"\n"
-"Heslo se zadává dvakrát pro ovìøení toho, zda nedo¹lo k pøeklepu pøi prvním\n"
-"pokusu. Tak je mo¾né heslo opravit a zadat dvakrát stejné.\n"
-"\n"
-"V expertním re¾imu budete dotázáni na to, zda se má pou¾ít autentikaèní\n"
-"server, jako je NIS nebo LDAP.\n"
-"\n"
-"Pokud se ve va¹í síti pou¾ívá protokol LDAP (nebo NIS) pro ovìøování\n"
-"u¾ivatelù, vyberte \"LDAP\" (nebo \"NIS\"). Pokud o tom nic nevíte,\n"
-"zeptejte se administrátora sítì.\n"
-"\n"
-"Pokud není poèítaè pøipojen do ¾ádné administrované sítì, zvolte\n"
-"\"Lokální soubory\" pro autentikaci."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO a grub jsou zavadìèe systému. Tato èást je normálnì plnì automatická.\n"
-"DrakX analyzuje boot sektor a zachová se podle toho, co nalezne:\n"
-"\n"
-" * pokud nalezne boot sektor Windows, pøepí¹e ho sektorem pro LILO/grub aby\n"
-"bylo mo¾né spou¹tìt jak Windows tak i Linux;\n"
-"\n"
-" * pokud nalezne boot sektor pro LILO nebo grub, tak jej pøepí¹e.\n"
-"\n"
-"Pokud jsou nìjaké pochybnosti, je zobrazen dialog s výbìrem mo¾ností.\n"
-"\n"
-" * \"Jaký spou¹tìè pou¾ít:\" je mo¾né si vybrat:\n"
-"\n"
-"    * \"GRUB\": pokud preferujete textovou verzi zavadìèe Grub.\n"
-"\n"
-"    * \"LILO s grafickou nabídkou\": pokud preferujete LILO s grafickým\n"
-"rozhraním.\n"
-"\n"
-"    * \"LILO s textovou nabídkou\": pokud preferujete textové rozhraní.\n"
-"\n"
-"    * \"Spou¹tìcí zaøízení\": ve vìt¹inì pøípadù není nutné mìnit výchozí\n"
-"nastavení (\"/dev/hda\"), ale lze nainstalovat zavadìè na druhý disk\n"
-"(\"/dev/hdb\") nebo dokonce na disketu (\"/dev/fd0\").\n"
-"\n"
-" * \"Prodleva pøes spu¹tìním\": pokud zapnete poèítaè, je tímto èasem\n"
-"umo¾nìno u¾ivateli vybrat si jiný systém z nabídky ne¾ bude zaveden výchozí\n"
-"systém.\n"
-"\n"
-"!! Vyvarujte se pokusù o to nenainstalovat zavadìè (vybráním volby \"Zru¹it"
-"\"),\n"
-"proto¾e by mìl existovat zpùsob, jak spustit Mandrake Linux!\n"
-"Také si dobøe rozmyslete, jaké zmìny zde provádíte !!\n"
-"\n"
-"Kliknutím na tlaèítko \"Roz¹íøené\" se dialog roz¹íøí o dal¹í mo¾nosti,\n"
-"vyhrazené pro znalé u¾ivatele.\n"
-"\n"
-"Mandrake Linux nainstaluje svùj vlastní zavadìè, který dovoluje spou¹tìt\n"
-"vlastní systém stejnì jako dal¹í operaèní systémy.\n"
-"\n"
-"Pokud máte jiný operaèní systém ji¾ na poèítaèi, automaticky ho zaøadí do\n"
-"nabídky pro spou¹tìní. Zde je mo¾né dále doladit volby, které se pøedávají "
-"tím,\n"
-"¾e na danou nabídkou dvakrát poklepete, lze také pøidat dal¹í nabídku\n"
-"èi danou nabídku odebrat. K dal¹ímu kroku se dostanete kliknutím na \"Hotovo"
-"\"."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) a grub jsou zavadìèe systému, které mohou spustit\n"
-"buï GNU/Linux nebo jiný operaèní systém nainstalovaný na poèítaèi.\n"
-"Ve vìt¹inì pøípadù jsou tyto systému správnì detekovány. Pokud se tak\n"
-"nestane, máte mo¾nost je ruènì pøidat v této obrazovce. Vìnujte opatrnost\n"
-"parametrùm, které zadáváte.\n"
-"\n"
-"Pokud nechcete umo¾nit pøístup k tìmto operaèním systémùm komukoliv, mù¾ete\n"
-"je z nabídky odstranit. Ale v tom pøípadì musíte mít spou¹tìcí disketu, ze\n"
-"které je mo¾né tento operaèní systém spustit!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Zde se musíte rozhodnout, kam umístit informace potøebné pro spu¹tìní "
-"systému\n"
-"GNU/Linux.\n"
-"\n"
-"Pokud pøesnì nevíte co zadat, ponechte \"První sektor na disku (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Zde si mù¾ete vybrat tiskový systém, který budete pou¾ívat. Jiné OS "
-"nabízejí\n"
-"jeden, Mandrake nabízí tøi.\n"
-"\n"
-" * \"pdq\" - co¾ znamená 'print, don't queue' a je vhodný tehdy, pokud "
-"nemáte\n"
-"¾ádné sí»ové tiskárny. Zvládá pouze nìkolik mo¾ností a tisk na nìj ze sítì\n"
-"je velmi pomalý. Tuto volbu lze po instalaci zmìnit spu¹tìním nástroje "
-"PrinterDrake\n"
-"z øídícího centra Mandrake, pokud kliknete na tlaèítko Expert.\n"
-"\n"
-" * \"CUPS\"'Common Unix Printing System' je vynikající v tisku na lokální\n"
-"tiskárny. Je jednoduchý a mù¾e fungovat jako klient i server pro klienty z "
-"\"lpd\"\n"
-"systému, tak¾e je s nimi kompatibilní. Je mo¾né nastavit spoustu voleb,\n"
-"ale základní nastavení je velmi jednoduché. Pokud potøebujete emulovat\n"
-"\"lpd\" server, staèi spustit démona \"cups-lpd\". Má také grafické "
-"prostøedí\n"
-"pro tisk a nastavení tiskárny.\n"
-"\n"
-" * \"lprNG\" - 'line printer daemon New Generation'. Tento systém doká¾e to\n"
-"co ostatní, ale umí tisknout na tiskárny pøipojené k Novell Netware, "
-"proto¾e\n"
-"podporuje IPX protokol a také umí zpracovat pøímo tiskové pøíkazy. Pokud\n"
-"potøebujete tisk na tiskárnách ze sítì Novell nebo tiskový systém bez\n"
-"zvlá¹tní tiskové fronty, vyberte si lprNG.\n"
-"Jinak je preferován CUPS, proto¾e je jednodu¹¹í a lépe pracuje v sítích."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX se nejdøíve pokusí najít v¹echny pevné disky v poèítaèi. Také se "
-"pokusí\n"
-"najít PCI SCSI adaptér(y). Pokud nìjaký(é) najde, automaticky nainstaluje\n"
-"správný ovladaè.\n"
-"\n"
-"Pokud ¾ádný nanajde, budete dotázáni, zda vùbec máte nìjaký SCSI adaptér.\n"
-"Odpovìzte \"Ano\" a vyberte si se seznamu adaptérù nebo odpovìzte \"Ne\","
-"jestli¾e ¾ádný adaptér nemáte.\n"
-"Pokud pøesnì nevíte jaký máte, mù¾ete to zjistit kliknutím na tlaèítko\n"
-"\"Zobrazit informace o hardware\".\n"
-"\n"
-"Pokud si vyberete ovladaè, DrakX se zeptá, zda pro nìj chcete zadat nìjaké\n"
-"informace. DrakX se pokusí inicializovat hardware s volbami, které jsou "
-"potøeba.\n"
-"Vìt¹inou to funguje dobøe.\n"
-"\n"
-"Pokud to nebude fungovat, budete muset zadat dal¹í informace pro ovladaè.\n"
-"Pro dal¹í nápovìdu se podívejte do instalaèní pøíruèky (kapitola 3 "
-"\"Získání\n"
-"informací o hardware\"), kde je popsáno, jak získat tyto informace z "
-"Windows\n"
-"(pokud je máte na poèítaèi), z dokumentace k hardware, nebo z internetové\n"
-"stránky výrobce (pokud máte pøístup k internetu."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Pro yaboot, pro dal¹í operaèní systémy, pro alternativní jádra nebo pro\n"
-"záchranný disk lze zde zadat dal¹í parametry.\n"
-"\n"
-"Pro jiné OS je mo¾né zadat pouze název a hlavní oddíl.\n"
-"\n"
-"Pro Linux je nìkolik dal¹ích mo¾ností:\n"
-"\n"
-" * Jmenovka: je to jednoduché jméno, které mù¾ete napsat do pøíkazového\n"
-"øádku pro yaboot pro zvolení daného systému.\n"
-"\n"
-" * Obraz: je to jmého jádra, ze kterého se spustí systém. Typicky je to "
-"vmlinux\n"
-"èi obdoba slova vmlinux s pøíponami.\n"
-"\n"
-" * Root: koøenové zeøízení \"/\" pøi instalaci Linuxu.\n"
-"\n"
-" * Pøidat volby: na poèítaèích Apple potøebuje jádro dal¹í parametry, aby "
-"se\n"
-"správnì nastavil hardware pro video, èi provedla emulace tlaèítek my¹i\n"
-"na klávesnici, proto¾e my¹ u poèítaèe Apple nemá druhé a tøetí tlaèítko.\n"
-"Zde jsou nìjaké pøíklady:\n"
-"\n"
-"        video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"        video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: tato volba je urèena moduly, které se musí nahrát do pamìti "
-"je¹tì\n"
-"døíve, ne¾ je pøístupný spou¹tìcí oddíl, èi v pøípadì opravy systému.\n"
-"\n"
-" * Velikost initrd: výchozí velikost ramdisku je 4,096 bytù. Pokud "
-"potøebujete\n"
-"vìt¹í velikost, zadejte sem potøebnou hodnotu.\n"
-"\n"
-" * Read-write: be¾nì je \"root\" oddíl pøipojen nejdøíve v re¾imu pouze pro\n"
-"ètení, aby se provedlo otestování systému pøed tím, ne¾ se pou¾ije pro bìh.\n"
-"Zde je mo¾né toto chování zmìnit.\n"
-"\n"
-" * Bez grafiky: grafické zaøízení na poèítaèích Apple je nìkdy "
-"problematické\n"
-"a tak je mo¾né zadat tuto volbu a zvolit nativní podporu.\n"
-"\n"
-" * Výchozí: zvolí tuto polo¾ku jako výchozí pro výbìr z nabídky, kdy staèí\n"
-"pouze stisknout ENTER a spustí se. Tato polo¾ka je oznaèena \"*\" a v¹echny\n"
-"výbìry se zobrazí po stisknutí tlaèítka [Tab]."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je zavadìè pro poèítaèe MacIntosh. Umo¾òuje spou¹tìt jak GNU/Linux, "
-"MacOS tak i MacOSX, pokud jsou na poèítaèi nainstalovány. Ve vìt¹inì\n"
-"pøípadù jsou tyto operaèní systémy správnì detekovány. Pokud nejsou, mù¾ete\n"
-"zde na této obrazovce pøidat záznamy ruènì. Dejte si ale pozor na správnou\n"
-"volbu parametrù.\n"
-"\n"
-"Yaboot má tyto hlavní volby:\n"
-"\n"
-" * Úvodní hlá¹ka: jednoduchá textová zpráva, která je zobrazena pøed "
-"výzvou.\n"
-"\n"
-" * Spou¹tìcí zaøízení: udává místo, kde jsou informace potøebné pro "
-"spu¹tìní\n"
-"GNU/Linuxu. Obyèejnì je to bootstrap oddíl, který byl vytvoøen ji¾ pøedtím.\n"
-"\n"
-" * Prodleva pro Firmware: narozdíl od zavadìèe LILO jsou zde dvì prodlevy.\n"
-"První prodleva v sekundách umo¾òuje zvolit mezi spu¹tìním CD, OF boot,\n"
-"MacOS nebo Linuxu.\n"
-"\n"
-" * Prodleva pro jádro: tato prodleva je podobná prodlevì pro LILO.\n"
-"Udává v násobcích 0,1 vteøiny jak dlouho se èeká, ne¾ se zavede \n"
-"výchozí jádro.\n"
-"\n"
-" * Povolit spu¹tìní z CD?: tato volba dovoluje pou¾ít \"C\" pro spu¹tìní "
-"CD.\n"
-"\n"
-" * Povolit OF Boot?: tato volba dovoluje pou¾ít \"N\" pro spu¹tìní Open "
-"Firm.\n"
-"\n"
-" * Výchozí OS: vyberte výchozí OS, který se spustí po uplynutí prodlevy."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Zde jsou shromá¾dìny rùzné informace, které se vztahují k tomuto poèítaèi.\n"
-"V závislosti na tom, zda je èi není pøítomen daný hardware, mù¾ete ale\n"
-"nemusíte, vidìt tyto polo¾ky: \n"
-"\n"
-" * \"My¹\": pokud je zji¹tìna my¹, mù¾ete zde zmìnit její nastavení.\n"
-"\n"
-" * \"Klávesnice\": kliknutím na tlaèítko lze zmìnit klávesovou mapu.\n"
-"\n"
-" * \"Èasové pásmo\": instalaèní program se pokusí odhadnout èasové pásmo na\n"
-"základì vybraného jazyka. To ale nemusí souhlasit, mù¾ete ¾ít v jiné zemi\n"
-"a tak je zde umo¾nìno zmìnit èasovou zónu, ve které se nyní nacházíte.\n"
-"\n"
-" * \"Tiskárna\": Kliknutím na tlaèítko \"Bez tiskárny\" se spustí prùvodce\n"
-"konfigurací tiskárny.\n"
-"\n"
-" * \"Zvuková karta\": pokud byla pøi instalaci detekována zvuková karta, je\n"
-"zde zobrazena. Pøi instalaci není mo¾né nic mìnit.\n"
-"\n"
-" * \"TV karta\": pokud byla detekována televizní karta, je zde zobrazena.\n"
-"Pøi instalaci není mo¾né nic mìnit.\n"
-"\n"
-" * \"ISDN karta\": pokud byla detekována ISDN karta, je zde zobrazena.\n"
-"Kliknutím na tlaèítko mù¾ete mìnit parametry pro tuto kartu."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vyberte disk, který chcete smazat pro instalaci Mandrake Linux.\n"
-"Pamatujte na to, ¾e v¹echna data budou ztracena a nelze jeji¾ obnovit!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kliknìte na \"OK\", pokud chcete smazat v¹echna data a oddíly na tomto\n"
-"pevném disku. Buïte opatrní, po odkliknutí nelze obnovit ¾ádná døívìj¹í "
-"data\n"
-"ani oddíly a to i pro Windows.\n"
-"\n"
-"Kliknutím na \"Zru¹it\" zru¹íte tuto operaci bez ztráty dat a oddílù na "
-"disku."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nelze naèíst moduly pro jádro odpovídající instalovanému jádru (chybí "
-"soubor\n"
-"%s), co¾ obecnì znamená, ¾e spou¹tìcí disketa nemá jádro stejné jako má "
-"instalaèní médium (vytvoøte prosím novou spou¹tìcí disketu)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Musíte také naformátovat %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vybrali jste pro instalaci následující server(y): %s\n"
-"\n"
-"\n"
-"Tyto servery budou standardnì aktivovány. Pøesto¾e není známý ¾ádný\n"
-"bezpeènostní problém, mohou se pøesto vyskytnout. Je proto dùle¾ité "
-"aktualizovat\n"
-"v¾dy, kdy¾ je to potøeba.\n"
-"\n"
-"\n"
-"Chcete opravdu nainstalovat tyto servery?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nelze pou¾ít v¹esmìrové vysílání bez NIS domény"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Vlo¾te naformátovanou disketu do %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Tato disketa není formátována"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pokud chcete pou¾ít ulo¾ený výbìr balíèkù, spus»te instalaci takto: 'linux "
-"defcfg=floppy'"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Chyba pøi ètení souboru %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Nìkterá èást va¹eho hardware potøebuje 'speciální' ovladaèe, aby mohla "
-"pracovat.\n"
-"Dal¹í informace mù¾ete nalézt na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musíte mít koøenový oddíl.\n"
-"K jeho vytvoøení musíte zvolit jeden existující oddíl\n"
-"(nebo vytvoøit nový), zvolit 'Pøípojný bod'\n"
-"a nastavit ho na '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Musíte mít odkládací oddíl"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemáte odkládací oddíl\n"
-"\n"
-"Chcete pøesto pokraèovat?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musíte mít FAT oddíl pøipojený na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Pou¾ít volné místo"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Není dostatek místa pro vytvoøení nového diskového oddílu"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Pou¾ít existující oddíl"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Není zde ¾ádný existující oddíl k pou¾ití"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Pou¾ít Windows oddíl jako loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Který diskový oddíl chcete pou¾ít pro Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Zvolte velikosti"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Velikost koøenového oddílu v MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Velikost odkládacího oddílu v MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Pou¾ít volné místo na Windows oddílu"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Na kterém oddílu chcete mìnit velikost?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Poèítám hranice souborového systému s Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Zmìnu velikost FAT není mo¾né provést, \n"
-"vyskytla se následující chyba: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Vá¹ diskový oddíl s Windows je pøíli¹ fragmentován, pou¾ijte nejdøíve\n"
-"program 'defrag'"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROVÁNÍ!\n"
-"\n"
-"DrakX nyní musí zmen¹it oddíl s Windows. Buïte opatrní: tato operace je\n"
-"nebezpeèná. Pokud jste tak ji¾ neuèinili, mìli byste nejprve ukonèit "
-"instalaci,\n"
-"spustit scandisk ve Windows (popøípadì i defrag) a potom instalaci znovu "
-"spustit\n"
-"Také byste si mìli data zálohovat. A¾ si budete jistí, ¾e chcete pokraèovat\n"
-"stisknìte Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Jakou velikost oddílu chcete nechat pro Windows na"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "diskovém oddílu %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Zmìna FAT oddílu neuspìla: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nejsou zde ¾ádné FAT oddíly, které by bylo mo¾né zmìnit (nebo není dostatek "
-"místa)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Smazat celý disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Odstranit Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Máte více ne¾ jeden pevný disk, na který chcete instalovat Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "V©ECHNY diskové oddíly a data na disku %s budou zru¹ena"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Vlastní rozdìlení disku"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Pou¾ít fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nyní mù¾ete rozdìlit vá¹ hardisk %s.\n"
-"A¾ skonèíte, nezapomeòte ulo¾it zmìny pomocí 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemáte dostatek volného místa na oddílu s Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nemù¾u najít ¾ádné volné místo pro instalaci"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Prùvodce DrakX na¹el následující øe¹ení:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Vytváøení diskových oddílù selhalo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Startuji sí»"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Zastavuji sí»"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Stala se chyba, ale nevím, jak jí správnì interpretovat.\n"
-"Pokraèujte na vlastní riziko."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Zdvojený pøípojný bod %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nìkteré dùle¾ité balíèky nebyly správnì nainstalované.\n"
-"Je mo¾né, ¾e je po¹kozen CD disk nebo CD-ROM mechanika.\n"
-"Zkontrolujete to pou¾itím pøíkazu \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Vítá vás %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Není dostupná ¾ádná disketová mechanika"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Zaèínám '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vá¹ systém má málo systémových prostøedkù. Pøi instalaci Mandrake Linuxu se\n"
-"mù¾ete setkat s rùznými problémy. Pokud se tak stane, zkuste textovou\n"
-"verzi instalaèního programu. Ta se spou¹tí tak, ¾e pøi startu\n"
-"z CD mechaniky stisknete 'F1' a poté napí¹ete 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Typ instalace"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Prosím zvolte jednu z následujících instalaèních tøíd:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Celková velikost zvolených balíèkù je pøibli¾nì %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Pokud si pøejete instalaci na men¹í prostor ne¾ je tento,\n"
-"zvolte si kolik procent balíèkù se má nainstalovat.\n"
-"\n"
-"Malý poèet procent nainstaluje pouze ty nejdùle¾itìj¹í balíèky, 100%%\n"
-"nainstaluje v¹echny zvolené."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na va¹em hardisku je místo pouze pro %d%% tìchto balíèkù.\n"
-"\n"
-"Pokud jich chcete nainstalovat je¹tì ménì, zvolte jiný poèet\n"
-"procent. Malý poèet procent nainstaluje pouze ty nejdùle¾itìj¹í\n"
-"balíèky, %d%% nainstaluje maximální mo¾né mno¾ství balíèkù."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Pøesnìji si budete moci vybrat v pøí¹tím kroku"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procent balíèkù k instalaci"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Výbìr skupiny balíèkù"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Výbìr jednotlivých balíèkù"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celková velikost: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "©patný balíèek"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Jméno: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verze: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Dùle¾itost: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nemù¾ete oznaèit tento balíèek, proto¾e pro jeho instalaci není dost místa"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Tyto balíèky budou instalovány"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Tyto balíèky budou odebrány"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Nemù¾ete vybrat/nevybrat tento balíèek"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je nepostradatelný balíèek, nemù¾e být odstranìn"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nemù¾ete od-oznaèit tento balíèek, proto¾e je u¾ nainstalovaný"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tento balíèek musí být obnoven\n"
-"Jste si jisti, ¾e ho nechcete zvolit?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tento balíèek musí být obnoven, nemù¾ete ho nezvolit"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Ukázat automaticky vybrané balíèky"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalovat"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Ulo¾it/Nahrát na/z disketu/y"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Aktualizuji výbìr balíèkù"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimální instalace"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Vyberte si balíèky, které chcete nainstalovat"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaluji"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Odhaduji"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Zbývající èas "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Èekejte prosím, pøipravuji instalaci"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d balíèkù(y)"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaluji balíèek %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Potvrdit"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odmítnout"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vymìòte prosím CD!\n"
-"\n"
-"Prosím vlo¾te CD oznaèené \"%s\" do mechaniky a stisknìte Ok.\n"
-"\n"
-"Pokud toto CD nemáte, stisknìte Zru¹it a toto CD nebude nainstalováno."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Pøesto pokraèovat?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Stala se chyba pøi øazení balíèkù:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Stala se chyba pøi instalaci balíèkù:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varování\n"
-"\n"
-"Pøeètìte si prosím pozornì následující termíny. Pokud s nimi nesouhlasíte,\n"
-"nejste oprávnìn pokraèovat v instalaci následujícím CD. Stisknìte\n"
-"\"Odmítnout\" pro pokraèování v instalaci bez tohoto média.\n"
-"\n"
-"\n"
-"Nìkteré programy na dal¹ím CD médiu nejsou ¹íøeny podle licence GPL èi\n"
-"podobné. Ka¾dý z tìchto programù je ¹íøen podle vlastní licence a podmínek.\n"
-"Ètete pozornì tyto licence a podmínky pøed tím, ne¾ zaènete daný software\n"
-"pou¾ívat nebo ¹íøit.\n"
-"Nìkteré licence zakazují pøená¹ení, vytváøení duplikatù (mimo zálo¾ní "
-"kopii),\n"
-"dal¹í ¹íøení, dekompilaci, reverzní engineering nebo modifikaci komponent.\n"
-"Ka¾dé poru¹ení podmínek okam¾itì pøeru¹uje va¹e práva podle dané licence.\n"
-"I kdy¾ dané licence dávají nìjaká práva, není dovoleno instalovat daný\n"
-"program na více systémù, pøizpùsobovat ho provozu na síti. V pøípadì\n"
-"pochybností kontaktujte distributora nebo výrobce daného programu.\n"
-"Pøenechání práv tøetím osobám nebo kopírování èásti komponent èi\n"
-"dokumentace je také zakázáno.\n"
-"\n"
-"\n"
-"V¹echna práva na programy na dal¹ím CD médiu patøí jejím právoplatným\n"
-"vlastníkùm podle autorského zákona.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Stala se chyba"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Chcete opravdu ukonèit instalaci?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Souhlas s licencí"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Uvod\n"
-"\n"
-"Operacni system a ruzne casti dostupne v distribuci Mandrake Linux jsou "
-"nazyvany \"Softwarove produkty\" (\"Software Products\"). Softwarové "
-"produkty zahrnuji, ale nejsou omezeny, na programy, metody pravidla a "
-"dokumentaci vztahujici se k operacnimu systemu a dalsim komponentam "
-"distribuce Mandrake Linux.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klávesnice"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Vyberte si rozlo¾ení va¹í klávesnice."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Zde je kompletní seznam dostupných klávesnic"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Který typ instalace chcete?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalace/Aktualizace"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Je to instalace nebo aktualizace?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Doporuèená"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expertní"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aktualizovat"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Aktualizovat pouze balíèky"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Vyberte si typ va¹í my¹i."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Pøipojení my¹i"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Ke kterému sériovému portu je pøipojena va¹e my¹?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulace tlaèítek"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulace 2 tlaèítka"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulace 3 tlaèítka"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavuji PCMCIA karty..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Nastavuji IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nejsou dostupné ¾ádné diskové oddíly"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Hledám oddíly, které lze pøipojit"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Zvolte si pøípojné(mount) body"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nemù¾u pøeèíst va¹i tabulku oddílù, je pro mì pøíli¹ poru¹ená :(\n"
-"Mù¾u se pokusit pokraèovat v èi¹tìní ¹patných oddílù (V©ECHNA\n"
-"DATA budou ztracena!). Jiná mo¾nost je zakázat DrakX mìnit tabulku\n"
-"oddílù (chyba je %s)\n"
-"\n"
-"Souhlasíte s tím, ¾e pøíjdete o v¹echny oddíly?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake neuspìl pøi ètení tabulky oddílù.\n"
-"Pokraèujte pouze na vlastní riziko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pro bootstrap není potøebné místo o velikosti 1MB! Instalace mù¾e pokraèovat "
-"ale pro spu¹tìní systému musíte vytvoøit bootstrap oddíl pomocí DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nebyl nalezen koøenový oddíl pro provedení aktualizace"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Koøenový oddíl"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Který diskový oddíl je koøenový (/) ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Musíte restartovat poèítaè aby se projevily zmìny v tabulce oddílù"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Zvolte diskové oddíly které chcete naformátovat"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Otestovat na vadné stopy?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formátuji oddíly"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytváøím a formátuji soubor %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Není dostatek odkládacího prostoru k instalaci, prosím pøidejte nìjaký"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Hledám dostupné balíèky"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Vyhledávám balíèky pro aktualizaci"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Na va¹em systému není dostatek místa pro instalaci nebo aktualizaci (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletní (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimální (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Doporuèená (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vyberte si, zda chcete ulo¾it nebo nahrát výbìr balíèkù na disketu.\n"
-"Formát výbìru je stejný jako formát automaticky generované diskety."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Nahrát z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Nahrávám z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Výbìr balíèkù"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Vlo¾te disketu obsahující výbìr balíèkù"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Ulo¾it na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Velikost vybraných balíèkù je vìt¹í ne¾ místo na disku"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Typ instalace"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nevybrali jste ¾ádnou skupinu balíèkù\n"
-"Vyberte si prosím alespoò minimální instalaci"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X prostøedí"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Základní dokumentace (doporuèeno!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Opravdu minimální instalace (speciálnì bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Pokud máte v¹echna CD vypsaná ní¾e, klepnìte na Ok.\n"
-"Pokud nemáte ¾ádné z nich, klepnìte na Zru¹it.\n"
-"Pokud Vám chybí pouze nìkteré z nich, odznaète je, a zvolte Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM oznaèené \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pøipravuji instalaci"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaluji balíèek %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Nastavení po instalaci"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Vlo¾te prosím spou¹tìcí disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Vlo¾te prosím disketu s moduly do %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nyní si mù¾ete stáhnout ¹ifrovací software.\n"
-"\n"
-"VAROVÁNÍ:\n"
-"\n"
-"Kvùli rùzným obecným po¾adavkùm a naøízením rùzných soudních úøadù,\n"
-"vztahujícím se na tento druh software, by se mìl zákazník a/nebo koncový\n"
-"u¾ivatel ujistit, zda mu jeho soudní správa umo¾òuje stáhnout si, ulo¾it\n"
-"a pou¾ívat tento software.\n"
-"\n"
-"Zákazník a/nebo koncový u¾ivatel by si mìl být vìdomý toho, ¾e nesmí\n"
-"pøestupovat zákony své jurisdikce. Pokud zákazník a/nebo koncový u¾ivatel\n"
-"nebude respektovat ustanovení vztahujících se zákonù, mù¾e se vystavit\n"
-"postihu.\n"
-"\n"
-"V ka¾dém pøípadì se Mandrakesoft i jeho výrobny a dodavatelé vzdávají\n"
-"jakékoliv zodpovìdnosti za pøímé i nepøímé ¹kody (vèetnì ztráty ziskù,\n"
-"pøeru¹ení podnikání, ztráty obchodních informací, jako¾to i jiných "
-"penì¾ních\n"
-"ztrát a eventuálních postihù, po¾adavkù na od¹kodnìní a ¾alob) vzniklé\n"
-"vlastnictvím, pou¾íváním nebo pouhým stahováním tohoto software, ke kterému\n"
-"mù¾e mít zákazník a/nebo nebo koncový u¾ivatel pøístup kdy¾ odsouhlasí\n"
-"tuto dohodu.\n"
-"\n"
-"\n"
-"Pokud máje jakékoliv dotazy vztahující se k této dohodì, kontaktujte prosím\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Nyní máte mo¾nost stáhnout aktualizované balíèky, které byly\n"
-"uvolnìny po vydání distribuce.\n"
-"\n"
-"Mù¾ete tak získat bezpeènostní opravy èi opravy chyb, ale\n"
-"potøebujete pøipojení k Internetu.\n"
-"\n"
-"Chcete nainstalovat aktualizace?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Kontaktuji web Mandrake Linux pro získání seznamu dostupných zrcadel"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Zvolte si zrcadlo(mirror) pro stahování balíèkù"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Stahuji ze zrcadla(mirror) seznam dostupných balíèkù"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Jaké je va¹e èasové pásmo?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarové hodiny nastaveny na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatická synchronizace èasu (pomocí NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Vzdálený CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Bez tiskárny"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Máte nìjakou zvukovou kartu na ISA sbìrnici?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Pro nastavení zvukové karty spus»te po instalaci \"sndconfig\"."
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nebyla nalezena zvuková karta. Zkuste spustit po instalaci \"harddrake\"."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Souhrn"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "My¹"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Èasová zóna"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Tiskárna"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN karta"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvuková karta"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV karta"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokální soubory"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Hlavní(root) heslo"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez hesla"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Toto heslo je pøíli¹ jednoduché (musí být alespoò %d znakù dlouhé)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Ovìøení"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Ovìøení pomocí LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Základní dn pro LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Ovìøení pomocí NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Doména"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Pomocí startovací diskety je mo¾né spustit systém Linux bez závislosti na\n"
-"zavadìèi systému. To je u¾iteèné tøeba v pøípadì, ¾e nechcete instalovat "
-"SILO\n"
-"na poèítaè, nebo jiný operaèní systém SILO pøepsal nebo SILO nepracuje "
-"správnì\n"
-"s hardwarovou konfigurací. Vlastní startovací disketa je také u¾iteèná "
-"tehdy,\n"
-"pokud je potøeba provést opravu systému po pøedchozím selhání.\n"
-"\n"
-"Pokud chcete vytvoøit startovací disketu, vlo¾te disketu do mechaniky\n"
-"a stisknìte \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "první mechaniky"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "druhé mechaniky"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Pøeskoèit"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Pomocí startovací diskety mù¾ete spustit Linux bez pou¾ití normálního\n"
-"zavádìcího programu (bootloader). To je u¾iteèné pokud nechcete instalovat\n"
-"LILO (nebo Grub), nebo jiný operaèní systém odstraní LILO, nebo LILO\n"
-"na va¹em poèítaèi nefunguje. Vlastní startovací disketa také mù¾e být\n"
-"pou¾ita spolu s \"Mandrake záchranným diskem\" (rescue image), co¾ "
-"poskytuje\n"
-"úèinnou pomoc pøi havárii systému. Chcete vytvoøit startovací disketu?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(VAROVÁNÍ! Pro koøenový oddíl pou¾íváte XFS, vytvoøení \n"
-"spou¹tìcí diskety bude zøejmì neúspì¹né, proto¾e XFS\n"
-"potøebuje velmi velký ovladaè)"
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Bohu¾el není dostupná ¾ádná disketová mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvolte mechaniku, kde chcete vytvoøit startovací disketu"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Vlo¾te disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Vytváøím startovací disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pøipravuji zavádìcí program"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Zdá se, ¾e máte nìjaký neznámý poèítaè,\n"
-"na kterém nebude yaboot pracovat.\n"
-"Instalace bude pokraèovat, ale budete\n"
-"potøebovat BootX pro spu¹tìní systému."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Chcete pou¾ít aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Stala se chyba pøi instalaci aboot,\n"
-"mám se pokusit o instalaci i kdy¾ to zru¹í první oddíl na disku?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaluji zavádìcí program"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalace zavádìcího programu neuspìla. Stala se tato chyba:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Mù¾ete potøebovat zmìnit startovací zaøízení pro Open Firmware\n"
-" pro aktivaci spou¹tìcího programu. Pokud nevidíte po spu¹tìní prompt,\n"
-" stisknìte pøi startu Command-Option-O-F a zadajte:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Potom zadejte: shut-down\n"
-"Pøi dal¹ím spu¹tìní u¾ uvidíte prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vlo¾te prázdnou disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Vytváøím disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nìkteré kroky nebyly dokonèeny.\n"
-"\n"
-"Chcete opravdu nyní skonèit?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme vám, instalace je dokonèena.\n"
-"Vyjmìte startovací média a stisknìte return pro restart.\n"
-"\n"
-"\n"
-"Na opravy této instalace systému Mandrake Linux se lze informovat\n"
-"na stránce Errata:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informace o konfiguraci systému po instalaci jsou dostupné\n"
-"v dané kapitole oficiální u¾ivatelské pøíruèky pro Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Vytvoøit disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Instalace mù¾e být v pøípadì potøeby plnì automatická,\n"
-"ale pou¾ije se celý disk!!!\n"
-"(v pøípadì instalace na druhý poèítaè)\n"
-"\n"
-"Takto lze jednodu¹e zopakovat instalaci.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaticky"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Zopakovat"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Ulo¾it výbìr jednotlivých balíèkù"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalace %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> pøepn. mezi prvky | <Space> výbìr   | <F12> dal¹í obraz."
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "chybí kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "chybí consolehelper"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Vyberte soubor"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Roz¹íøení"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Základní"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Prosím poèkejte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informace"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Rozbal vìtev"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sbal vìtev"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Pøepnutí mezi abecedním a skupinovým øazením"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "©patná volba, zkuste to znovu\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va¹e volba? (výchozí %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Polo¾ky, které je potøeba vyplnit:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va¹e volba? (0/1, výchozí '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Tlaèítko '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Chcete kliknout na toto tlaèítko? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va¹e volba? (výchozí '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Je zde více voleb, ze kterých je mo¾né si vybrat (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vyberte si prosím první èíslo z výbìru, které chcete editovat,\n"
-"nebo stisknìte Enter pro pokraèování.\n"
-"Va¹e volba? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Oznamuji zmìnu návì¹tí:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Znovu odeslat"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Èeské (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Nìmecké"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvoøák"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "©panìlské"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finské"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francouzské"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norské"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polské"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruské"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "©védské"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK-Britské"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US-Americké"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albánské"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arménské (staré)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arménské (psací stroj)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arménské (foneticky)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Ázerbajd¾ánské (latinka)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgické"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulharské (foneticky)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulharské (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilské (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bìloruské"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "©výcarské (Nìmecký styl)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "©výcarské (Francouzský styl)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Èeské (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Nìmecké (bez mrtvých kláves)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dánské"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvoøák (US) "
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoøák (Norské)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvoøák (©védské) "
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonské"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzínské (\"Ruské\" rozlo¾ení)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzínské (rozlo¾ení \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Øecké"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Maïarské"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Chorvatské"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelské"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelské (foneticky)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Íránské"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandské"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italské"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonská 106 kláves"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejská klávesnice"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinsko-Americké"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litevské AZERTY (stará)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litevské AZERTY (nová)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litevské \"èíselná øada\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litevské \"foneticky\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latevské"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonské"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandské"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polské (rozlo¾ení QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polské (rozlo¾ení QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalské"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadské (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunské (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunské (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruské (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovinské"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovenské (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovenské (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srbské (cyrilice)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilské"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thajské"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tad¾iská klávesnice"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turecké (tradièní model \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turecké (moderní model \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinské"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US (mezinárodní)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamská \"èíselná øada\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslávské (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Pravá klávesa Alt"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Obì klávesy Shift souèasnì"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control a Shift souèasnì"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Klávesa CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl a Alt souèasnì"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt a Shift souèasnì"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Klávesa \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Levá klávesa \"Windows\""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Pravá klávesa \"Windows\""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Propletené pøípojné body %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Odeberte nejdøíve logické disky\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Podpora PCMCIA ji¾ není dostupná pro kernely 2.2. Pou¾ijte prosím øadu 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - my¹"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standardní PS2 my¹ s koleèkem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 tlaèítko"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Standardní dvoutlaèítková my¹"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Obecná"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "S koleèkem"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "Sériová"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Standardní tøítlaèítková my¹"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech série CC (sériová)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sériová, starý C7 typ)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tlaèítka"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tlaèítka"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "®ádná"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Bez my¹i"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Vyzkou¹ejte prosím, zda funguje my¹"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Vyzkou¹ejte na my¹i,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "TOÈIT KOLEÈKEM!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Ukonèit"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Dal¹í ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Pøedchozí"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Je to správnì?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Pøipojení k Internetu"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Nejbì¾nìji se pro pøipojení pomocí adsl pou¾ívá pppoe.\n"
-"Nìkterá pøipojení pou¾ívají pptp, nìkterá pouze dhcp. Jestli si nejste "
-"jistí, zvolte 'pou¾ít pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "pou¾ít dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pou¾ít pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pou¾ít pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kterého dhcp klienta chcete pou¾ít?\n"
-"Standardní je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ve va¹em poèítaèi nebyl nalezen ¾ádný sí»ový adaptér.\n"
-"Nemohu nastavit typ spojení."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Zvolte sí»ové rozhraní"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vyberte si prosím, který sí»ový adaptér chcete pou¾ít pro pøipojení k "
-"internetu"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nebyla nalezena sí»ová karta"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Nastavuji sí»"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Prosím zadejte jméno va¹eho poèítaèe, proto¾e ho vy¾adují nìkteré\n"
-"DHCP servery. Toto jméno musí být úplné, jako napøíklad\n"
-"'mybox.mylab.myco.com'."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Jméno poèítaèe"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Prùvodce nastavením sítì"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externí ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interní ISDN karta"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Jaké je va¹e ISDN pøipojení?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Kterou ISDN konfiguraci preferujete?\n"
-"\n"
-"* Starou, pou¾itou pro isd4net. Ta obsahuje výkonné nástroje,\n"
-"  ale je choulostivá na konfiguraci a není standardní.\n"
-"\n"
-"* Novou konfiguraci, snaz¹í pro porozumìní, více standardní,\n"
-"  ale s ménì nástroji.\n"
-"\n"
-"Doporuèujeme vybrat si snaz¹í novou konfiguraci.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nová konfigurace (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stará konfigurace (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Nastavení ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vyberte si svého poskytovatele internetu.\n"
-" Pokud není na seznamu, vyberte si Jiný"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Evropský protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropský protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol pou¾itý ve zbytku svìta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol pou¾itý ve zbytku svìta \n"
-" ¾ádný D-kanál (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Který protokol chcete pou¾ít?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Jaký typ karty máte?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nevím"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jestli máte ISA kartu, mìly by být hodnoty na následující obrazovce "
-"správné.\n"
-"\n"
-"Jestli máte PCMCIA kartu, musíte znát její IRQ a IO.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Pøeru¹it"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Pokraèovat"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kterou z tìchto ISDN karet máte?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Na¹el jsem ISDN PCI kartu, její¾ typ ale neznám. Prosím zvolte si jednu z "
-"následujícího seznamu PCI karet."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nena¹el jsem ¾ádnou ISDN PCI kartu. Prosím zvolte si jednu z následující "
-"nabídky"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ke kterému sériovému portu je vá¹ modem pøipojen?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Mo¾nosti vytáèení"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Jméno pøipojení"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonní èíslo"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Pøihla¹ovací jméno"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Podle scénáøe"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Pomocí terminálu"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Jméno domény"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "První DNS Server (nepovinný)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Druhý DNS Server (nepovinný)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mù¾ete se odpojit nebo pøekonfigurovat pøipojení."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mù¾ete pøekonfigurovat pøipojení."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "V souèasnosti jste pøipojeni k Internetu"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Nemù¾ete se pøipojit k Internetu nebo pøekonfigurovat pøipojení."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "V souèasnosti nejste pøipojeni k Internetu."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Pøipojit"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Odpojit"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Nastavit pøipojení"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Nastavení a pøipojení k internetu"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nyní se pøipravuje konfigurace %s pøipojení."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nyní se bude konfigurovat pøipojení %s.\n"
-"\n"
-"\n"
-"Stisknìte OK pro pokraèování."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Nastavení sítì"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Proto¾e provádíte instalaci po síti, je ji¾ sí» nastavena.\n"
-"Kliknìte na Ok pro zachování nastavení nebo kliknìte na Zru¹it pro nové "
-"nastavení pøipojení Internetu a k síti.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Vítá vás prùvodce pøipojením k síti\n"
-"\n"
-"Nyní lze nastavit pøipojení k síti nebo internetu.\n"
-"Pokud nechcete pou¾ít automatickou detekci, odznaète políèko.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Zvolte profil pro nastavení"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Pou¾ít autodetekci"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detekuji zaøízení..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Modemové pøipojení"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detekováno na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN pøipojení"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detekováno %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL pøipojení"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detekováno na rozhraní %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelové pøipojení"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detekováno kabelové pøipojení"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Pøipojení k LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "detekovaná(é) sí»ová(é) karta(y)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Zvolte si pøipojení, které chcete nastavit"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Máte nastaveno více zpùsobù, jak se pøipojit k Internetu.\n"
-"Vyberte si jeden, který chcete pou¾ít.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetové pøipojení"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete se automaticky pøipojovat po startu poèítaèe?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Nastavení sítì"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Je potøebné znovu spustit sí»"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Vyskytl se problém pøi restartu sítì: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulujeme, konfigurace sítì a internetu je ukonèena.\n"
-"\n"
-"Konfigurace bude nyní aktivována.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Doporuèujeme po tomto kroku restartovat X Window,\n"
-"aby se pøede¹lo problémùm se zmìnou jména poèítaèe."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Vyskytl se problém bìhem konfigurace.\n"
-"Otestujte pøipojení k Internetu pomocí net_monitor nebo mcc. Pokud není "
-"spojení funkèní, bude potøeba asi znovu naèíst konfiguraci"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VAROVÁNÍ: Toto zaøízení ji¾ bylo nastaveno pro pøipojení k Internetu.\n"
-"Kliknìte na Ok pro zachování nastavení.\n"
-"Modifikace následujících polo¾ek pøepí¹e toto nastavení."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Prosím zadejte IP nastavení pro tento poèítaè.\n"
-"Ka¾dá polo¾ka musí být zadána jako IP adresa v 'desetinné' formì\n"
-"(napøíklad 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavuji sí»ové zaøízení %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (ovladaè %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maska sítì"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatická IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa musí být ve formátu 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Prosím zadejte jméno va¹eho poèítaèe.\n"
-"Toto jméno musí být úplné, jako 'mybox.mylab.myco.com'.\n"
-"Pokud pou¾íváte bránu(gateway), mù¾ete také zadat její adresu"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Brána (napø. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Zaøízení brány(gateway)"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Nastavení proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Sledovat id sí»ové karty (u¾iteèné u notebookù)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy by mìla být http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy by mìla být ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Nastavení Internetu"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete se nyní pokusit pøipojit k internetu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testuji pøipojení k internetu..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Poèítaè je nyní pøipojen k internetu"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Z bezpeènostních dùvodù bude spojení ukonèeno."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nepodaøilo se pøipojit k Internetu.\n"
-"Pokuste se pøekonfigurovat dané pøipojení."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Nastavení pøipojení"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Prosím vyplòte nebo zkontrolujte následující údaje"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Va¹e osobní telefonní èíslo"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Jméno poskytovatele (napø provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonní èíslo poskytovatele"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS poskytovatele è.1 (volitelné)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS poskytovatele è.2 (volitelné)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Výbìr si zemi"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Typ vytáèení"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Rychlost pøipojení"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Prodleva pøipojení (vteøiny)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Vá¹ úèet (u¾ivatelské jméno)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Heslo va¹eho úètu"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "chyba pøipojování: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Roz¹íøené diskové oddíly nejsou na tomto systému podporovány"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ve tabulce diskových oddílù je mezera, ale nemohu ji pou¾ít.\n"
-"Jediné øe¹ení je pøesunout primární oddíly tak, abyste mìli mezeru vedle\n"
-"roz¹íøených oddílù."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnova ze souboru %s neuspìla: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "©patný zálo¾ní soubor"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Chyba pøi zapisování do souboru %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Nìco ¹patného se stalo s pevným diskem. \n"
-"Test na integritu dat selhal. \n"
-"To znamená, ¾e zápis na tento disk mù¾e skonèit nepøedvídanì"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "musíte mít"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "dùle¾ité"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "nejménì dùle¾ité"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "nedùle¾ité"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mù¾e se hodit"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Tiskový Systém pro Unix"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nové generace"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Démon pro tiskárny"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tisk bez ukládání do fronty"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Místní tiskárna"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Vzdálená tiskárna"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Tiskárna na vzdáleném CUPS serveru"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Tiskárna na vzdálený lpd serveru"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Sí»ová tiskárna (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tiskárna na serveru Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Tiskárna na Netware serveru"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Zadejte URI tiskového zaøízení"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Poslat tiskovou úlohu do pøíkazu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Neznámý model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Místní tiskárny"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Vzdálené tiskárny"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na paralelním portu \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB tiskárna \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multifunkèní na paralelním portu \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multifunkèní zaøízení na USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunkèní zaøízení na HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multifunkèní zaøízení"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", pøi tisku na %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", tiskárna \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP hostitel \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na serveru Windows \"%s\", sdílená jako \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na severu Novell \"%s\", tiskárna \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", pou¾ívá pøíkaz %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Pøímý tisk (bez ovladaèe)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na tomto poèítaèi)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na serveru CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Výchozí)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Zvolte pøipojení tiskárny"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Jak je tiskárna pøipojena?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"V pøípadì vzdáleného CUPS serveru nemusíte nastavovat tiskárny zde,\n"
-"tiskárny budou automaticky detekovány."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Nastavení CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Zadejte CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Pøi tisku na vzdálený CUPS server v lokální síti není potøeba nic "
-"nastavovat, CUPS server bude automaticky informovat o jeho tiskárnách. "
-"V¹echny známé tiskárny pro tento poèítaè jsou nyní vypsány v poli \"Vzdálené "
-"tiskárny\". v hlavní sekci nástroje Printerdrake. Pokud je CUPS na jiné "
-"síti, musíte pro získání informací zadat IP adresu CUPS serveru a také "
-"pøípadnì èíslo portu, jinak nechte toto pole prázdné."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Ve vìt¹inì pøípadù je CUPS automaticky správnì nastaven v závislosti na\n"
-"sí»ovém prostøedí tak, aby bylo mo¾né tisknout na tiskárnách umístìných\n"
-"na CUPS serverech v síti. Pokud je nastavení nesprávné, vypnìte\n"
-"\"Automatické nastavení pro CUPS\" a editujte soubor /etc/cups/cupsd.conf\n"
-"ruènì. Nezapomeòte potom CUPS restartovat (pøíkaz: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa musí být ve formátu 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Èíslo portu musí být celé èíslo!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP adresa CUPS serveru"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatické nastavení pro CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Detekuji zaøízení ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Otestovat porty"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Pøidat novou tiskárnu"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Vítejte v prùvodci nastavením tisku\n"
-"\n"
-"Tento prùvodce vám pomù¾e nainstalovat lokální nebo vzdálené tiskárnu(y), "
-"které je mo¾né následnì vyu¾ít na vzdáleném poèítaèi na síti.\n"
-"\n"
-"Budete dotázáni na v¹echny potøebné informace pro nastavení tiskárny, mù¾ete "
-"si vybrat se v¹ech tiskových ovladaèù a typù pøipojení tiskárny."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Místní tiskárna"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Vítejte v prùvodci nastavením tisku\n"
-"\n"
-"Tento prùvodce vám pomù¾e nainstalovat tiskárnu(y), která je pøipojena k "
-"tomuto poèítaèi.\n"
-"\n"
-"Pøipojte prosím tiskárnu(y) k poèítaèi a zapnìte ji. Pokud je v¹e "
-"pøipraveno, kliknìte na tlaèítko \"Dal¹í\" nebo na tlaèítko \"Zru¹it\", "
-"pokud tiskárnu nechcete nyní nastavit.\n"
-"\n"
-"Mù¾e se stát, ¾e nìkteré poèítaèe mohou zatuhnout pøi automatické detekci a "
-"tehdy lze pou¾ít \"Expertní re¾im\" pro instalaci bez automatické detekce. "
-"\"Expertní re¾im\" pou¾ijte také tehdy, pokud chcete nastavit vzdálenou "
-"tiskárnu(y) a printerdrake ji/je automaticky nenabídnul."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatická detekce tiskáren"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Blahopøejeme, tiskárna je instalována a nastavena!\n"
-"\n"
-"Tisknout z aplikací lze pøíkazem \"Tisk\" (obyèejnì v menu \"Soubor\").\n"
-"\n"
-"Pokud chcete pøidat, odebrat, pøejmenovat tiskárnu nebo zmìnit její výchozí "
-"hodnoty (typ zásobníku, kvalita tisku,...), zvolte \"Tiskárna\" v sekci "
-"\"Hardware\" v øídícím centru Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatická detekce tiskáren"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake doká¾e automaticky detekovat tiskárny pøipojené pøes paralelní "
-"nebo USB rozhraní, ale na nìkterých systémech mù¾e automatická detekce "
-"ZMRAZIT SYSTÉM A TAKÉ PO©KODIT SOUBORY! Provádíte to tedy na VLASTNÍ "
-"NEBEZPEÈÍ!\n"
-"\n"
-"Chcete opravdu pou¾ít automatickou detekci tiskárny?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Provést autodetekci"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Nastavit tiskárnu manuálnì"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detekováno %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Tiskárna na paralelním portu \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB tiskárna \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Lokální tiskárna nenalezena! Pro ruèní instalaci tiskárny zadejte jméno "
-"zaøízení/souboru do políèka (Paralelní porty: /dev/lp0, /dev/lp1,... jsou "
-"ekvivalentní LPT1:, LPT2:, ...,první USB tiskárna: /dev/usb/lp0, druhá USB "
-"tiskárna: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Musíte zadat zaøízení nebo jméno souboru!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Místní tiskárna nenalezena!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Sí»ové tiskárny mohou být nainstalovány a¾ po instalaci systému. V øídícím "
-"centru Mandrake vyberte \"Hardware\" a potom \"Tiskárna\"."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Pro instalaci sí»ových tiskáren kliknìte nejdøíve na \"Zru¹it\", pøejdìte do "
-"\"Expertního re¾imu\" a potom opìt kliknìte na \"Pøidat novou tiskárnu\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Tyto tiskárny byly automaticky detekovány, pokud není mezi nimi po¾adovaná "
-"tiskárna, zadejte do políèka jméno zaøízení/jméno souboru"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Zde je seznam v¹ech automaticky rozpoznaných tiskáren. Vyberte si tiskárnu, "
-"kterou chcete nastavit nebo zadejte do políèka jméno zaøízení/jméno souboru"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Byla automaticky detekována tato tiskárna. Konfigurace této tiskárny je plnì "
-"automatická. Pokud nebyla tiskárna správnì detekována nebo preferujete "
-"vlastní nastavení tisku, zvolte \"Ruèní konfigurace\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Tyto tiskárny byly automaticky detekovány. Konfigurace tìchto tiskáren je "
-"plnì automatická. Pokud nebyla tiskárna správnì detekována nebo preferujete "
-"vlastní nastavení tisku, zvolte \"Ruèní konfigurace\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Vyberte si port, ke kterému je tiskárna pøipojena nebo zadejte do políèka "
-"jméno zaøízení/jméno souboru"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Vyberte port, ke kterému je va¹e tiskárna pøipojena."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelní porty: /dev/lp0, /dev/lp1,... je ekvivalentní LPT1:, LPT2:, ...,"
-"první USB tiskárna: /dev/usb/lp0, druhá USB tiskárna: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Musíte vybrat/zadat tiskárnu/zaøízení!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ruèní nastavení"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Je va¹e tiskárna multifunkèní zaøízení od HP (OfficeJet, PSC, PhotoSmart "
-"LaserJet 1100/1200/1220/3200/3300 se skenerem)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instaluji balíèek HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Testují zaøízení a nastavuji HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instaluji balíèek SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skenování na multifunkèním zaøízení od HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Zpøístupòuji tiskový port pro CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Naèítám databázi tiskáren ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Mo¾nosti vzdálené lpd tiskárny"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Abyste mohli pou¾ívat vzdálenou tiskovou frontu lpd, musíte zadat jméno "
-"tiskového serveru a jméno tiskárny, kam má být posílán tisk."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Jméno vzdáleného poèítaèe"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Jméno vzdálené tiskárny"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Chybí jméno vzdáleného poèítaèe!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Chybí jméno vzdálené tiskárny!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Mo¾nosti SMB (Windows 9x/NT) tiskárny"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Abyste mohli tisknout na SMB tiskárnì, musíte zadat jméno SMB poèítaèe"
-"(Pozor! To mù¾e být odli¹né od jeho TCP/IP jména) a mo¾ná i IP adresu "
-"tiskového serveru, jméno sdílené tiskárny, vhodné u¾ivatelské jméno, heslo a "
-"informace o pracovní skupinì."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Jméno SMB serveru"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP adresa SMB serveru"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Sdílené jméno"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Pracovní skupina"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Musí být zadáno buï jméno serveru nebo jeho IP adresa!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Chybí jméno pro sdílení pøes Sambu!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "BEZPEÈNOSTNÍ VAROVÁNÍ!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Provádíte nastavení tisku s úètem na systému Windows. Kvùli chybì v klientu "
-"protokolu Samba je heslo pøi tisku posláno jako èistý text z pøíkazové "
-"øadky. Je tudí¾ mo¾né, aby kdokoliv vidìl toto heslo na obrazovce kdy¾ si "
-"zadá pøíkaz napø. \"ps auxwww\".\n"
-"\n"
-"Doporuèujeme pou¾ívat jednu z následujících alternativ (ve v¹ech pøípadech "
-"je dobré mít nastaven pøístup pouze z poèítaèù z lokální sítì, respektivì za "
-"firewalem):\n"
-"\n"
-"Pou¾ít úèet, který nemá nastaven ¾ádné heslo, jako je \"GUEST\" nebo "
-"speciální úèet pouze pro úèely tisku. Neodstraòujte ochranu heslem z bì¾ného "
-"úètu nebo dokonce z administrátorského úètu.\n"
-"\n"
-"Nastavte tiskárnu na Windows serveru tak, aby fungovala pod LPD protokolem. "
-"Potom nastavte tisk na této tiskárnì pomocí typy spojení \"%s\" v aplikaci "
-"Printerdrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Nastavit na serveru s Windows tiskárnu, která bude pøístupná pomocí IPP "
-"protokolu a nastavit tisk z tohoto poèítaèe pomocí spojení \"%s\" v aplikaci "
-"Printerdrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Pøipojit tiskárnu k Linux serveru a nechat poèítaè(e) s Windows pracovat "
-"jako klienty.\n"
-"\n"
-"Chcete opravdu pokraèovat v nastavení tiskárny tímto zpùsobem?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Mo¾nosti NetWare tiskárny"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Abyste mohli tisknout na NetWare tiskárnì, musíte zadat jméno NetWare "
-"serveru (Pozor! To mù¾e být odli¹né od jeho jména pro TCP/IP!), jméno "
-"tiskové fronty tiskárny, kterou chcete pou¾ívat, u¾ivatelské jméno a heslo."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Tiskový server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Jméno tiskové fronty"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Chybí jméno pro sdílení pøes NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Chybí jméno tiskové fronty pro NCP!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Mo¾nosti tiskárny pro TCP/socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Abyste mohli tisknout na TCP nebo socketové tiskárnì, musíte zadat jméno "
-"poèítaèe s tiskárnou a volitelnì i èíslo portu. Pokud máte HP JetDirect, "
-"port je obvykle 9100, jinak se mù¾e mìnit. Podívejte do manuálu k va¹emu "
-"hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Jméno poèítaèe s tiskárnou"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Chybí jméno poèítaèe s tiskárnou!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Tiskového Zaøízení"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Zde lze pøímo zadat URI pro pøístup k tiskárnì. URI musí splòovat buï "
-"specifikaci CUPS nebo Foomatic. Taky pamatujte na to, ¾e v¹echny URI nejsou "
-"podporovány ve v¹ech tiskových správcích."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Musí být zadáno správné URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ka¾dá tiskárna potøebuje jméno (napø. \"tiskarna\"). Popis a umístìní nemusí "
-"být vyplnìny. Jsou to komentáøe pouze pro u¾ivatele."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Jméno tiskárny"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Popis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Umístìní"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Naèítám databázi tiskáren ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model tiskárny"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake provedl porovnání modelu tiskárny, který byl zji¹tìn pøi auto-"
-"detekci s modelem obsa¾eným v jeho databázi a nabídnul nejlep¹í øe¹ení. Tato "
-"volba mù¾e být ¹patná, zvlá¹» pokud není tiskárna obsa¾ena v databázi. "
-"Zkontrolujte, zda je volba správná a klepnìte na \"Zvolený model je správný"
-"\" a pokud není, volte \"Vybrat model ruènì\". V dal¹í obrazovce potom bude "
-"mo¾né vybrat model tiskárny ruènì.\n"
-"\n"
-"Pro va¹i tiskárnu Printerdrake nalezl:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Zvolený model je správný"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Vybrat model ruènì"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Výbìr modelu tiskárny"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Jaký model tiskárny máte?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Zkontrolujte prosím, zda Printerdrake provedl automatickou detekci modelu "
-"správnì. Pokud je vyznaèen nesprávný model, mù¾ete ho zmìnit výbìrem ze "
-"seznamu nebo zvolte \"Raw printer\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Pokud není tiskárna v seznamu, vyberte kompatibilní nebo podobný model "
-"(podívejte se do manuálu)"
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Nastavení pro OKI win-tiskárnu"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Nyní nastavujete laserovou tiskárnu OKI winprinter. Tyto tiskárny pou¾ívají "
-"velmi specifický komunikaèní protokol a mohou pracovat pouze pokud jsou "
-"pøipojeny k prvnímu paralelnímu portu. Pokud je tiskárna pøipojena na jiný "
-"port, nebo se tiskne pøes server, pøipojte tiskárnu na první paralelní port. "
-"Jinak tisk nebude pracovat. Typ pøipojení bude ovladaè ignorovat."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavení inkoustové tiskárny Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkoustové tiskárny dodávané firmou Lexmark podporují pouze tisk na lokální "
-"tiskárnì, tak¾e nelze tisknout pøes vzdálený server. Prosím pøipojte "
-"tiskárnu na lokální port nebo ji nastavte na tom poèítaèi, ke kterému bude "
-"pøipojena."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Aby bylo mo¾né tisknout na inkoustových tiskárnách od firmy Lexmark, je "
-"potøeba mít tiskový ovladaè. Na stránce (http://www.lexmark.com/) kliknìte "
-"na tlaèítko \"Drivers\" a vyberte vá¹ model tiskárny. Potom zvolte Linux "
-"jako operaèní systém. Ovladaèe jsou v RPM balíècích nebo mají interaktivní "
-"instalaci. Tu ale nepotøebujete. Ukonèete instalaèní program ihned po "
-"odsouhlasení licence. Pak mù¾ete nastavit chování tiskové hlavy pomocí "
-"tohoto programu."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Výchozí nastavení pro tiskárnu\n"
-"\n"
-"Ujistìte se, ¾e typ stránky a typ inkoustu/re¾im tisku (pokud je) a také "
-"hardwarová konfigurace laserové tiskárny (pamì», duplexní jednotka, externí "
-"podavaè) jsou nastaveny správnì. Pøi tisku ve velmi vysoké kvalitì/rozli¹ení "
-"bude tisk zøejmì pomalej¹í."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Hodnota %s musí být celé èíslo!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Hodnota %s musí být èíslo!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Hodnota %s je mimo rozsah!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Chcete opravdu nastavit tiskárnu \"%s\"\n"
-"jako výchozí?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testovací stránka"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vyberte si testovací stránku, kterou chcete vytisknout.\n"
-"Poznámka: tisk testovací stránky s fotografií mù¾e trvat velmi dlouho nebo "
-"se na tiskárnì s málo pamìtí nemusí podaøit vùbec. Ve vìt¹inì pøípadù staèí "
-"vytisknout bì¾nou testovací stránku."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Bez testovací stránky"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Tisk"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardní testovací stránka"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativní testovací stránka (letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativní testovací stránka (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Testovací stránka s fotografií"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Netisknout testovací stránku"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tisknu testovací stránku(y)"
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Zku¹ební stránka(y) byla(y) poslána(y) na tiskárnu.\n"
-"Mù¾e chvilku trvat ne¾ zaène tisk.\n"
-"Stav tisku:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Zku¹ební stránka byl poslána na tiskárnu.\n"
-"Mù¾e chvilku trvat ne¾ zaène tisk.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Probìhl tisk správnì ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Pøímý tisk na tiskárnu"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Vytisknout soubor z pøíkazové øádky (terminálového okna) lze buï pøíkazem\n"
-"\"%s<soubor>\" nebo pøes grafické nástroje: \"xpp <soubor> nebo \"kprinter "
-"<soubor>\". Grafické nástroje umo¾òují jednodu¹e vybrat tiskárny a mìnit "
-"jejich parametry.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tyto pøíkazy lze nastavit do políèka \"Pøíkazy tisku\" v dialogu tisku ve "
-"vìt¹inì aplikací, ale nezadává se zde jméno souboru, které je poka¾dé jiné v "
-"závislosti na dané aplikaci.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Pøíkaz \"%s\" dovoluje modifikovat volby pro ka¾dou tiskovou úlohu. "
-"Jednodu¹e zadejte potøebné nastavení do pøíkazové øádky, napø. \"%s<soubor>"
-"\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"V¹echny mo¾nosti pro souèasnou tiskárnu jsou zobrazeny ní¾e, nebo kliknìte "
-"na tlaèítko \"Mo¾nosti tiskárny\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Zde je seznam dostupných voleb pro nastavení tisku pro aktuální tiskárnu:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pro vyti¹tìní souboru z pøíkazové øádky (v terminálovém oknì) pou¾ijte "
-"pøíkaz \"%s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tento pøíkaz lze nastavit do políèka \"Pøíkazy tisku\" v dialogu tisku ve "
-"vìt¹inì aplikací, ale nezadává se zde jméno souboru, které je poka¾dé jiné v "
-"závislosti na dané aplikaci.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"V¹echny mo¾nosti tisku pro souèasnou tiskárnu jsou zobrazeny ní¾e, nebo "
-"kliknìte na tlaèítko \"Mo¾nosti tiskárny\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pro vyti¹tìní souboru z pøíkazové øádky (v terminálovém oknì) pou¾ijte "
-"pøíkaz \"%s<soubor>\" nebo \"%s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Lze také pou¾ít grafické rozhraní \"xpdq\" pro nastavení mo¾ností a ke "
-"správìtiskových úloh.\n"
-"Pokud pou¾íváte grafické prostøedí KDE, máte na pracovní plo¹e ikonu,\n"
-"pojmenovanou \"STOP Printer!\", který po kliknutí ihned zastaví "
-"v¹echnytiskové úlohy. To je vhodné tøeba pro pøípady uváznutí papíru.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Pøíkazy \"%s\" a \"%s\" dovolují modifikovat volby pro ka¾dou tiskovou "
-"úlohu. Jednodu¹e zadejte potøebné nastavení do pøíkazové øádky, napø. \"%"
-"s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zavøít"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tisknu/skenuji na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tisknu na tiskárnu \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Mo¾nosti tiskárny"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Multifunkèní zaøízení od HP bylo nastaveno pro mo¾nost skenování. Nyní lze "
-"skenovat pøíkazem \"scanimage\" (\"scanimage -d hp:%s\" zvolíte po¾adovaný "
-"skener) z pøíkazového øádku nebo z grafického prostøedí pomocí \"xscanimage"
-"\" nebo \"xsane\". Pokud pou¾íváte program GIMP, mù¾ete také skenovat "
-"výbìrem z nabídky \"Soubor\"/\"Získat\". Více informací získáte pøíkazem "
-"\"man scanimage\" a \"man sane-hp\".\n"
-"\n"
-"Nepou¾ívejte pro toto zaøízení \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Multifunkèní zaøízení od HP bylo nastaveno pro mo¾nost skenování. Nyní lze "
-"skenovat pøíkazem \"ptal-hp %s scan ...\" z pøíkazového øádku. Skenování z "
-"grafického prostøedí nebo z programu GIMP není zatím na tomto zaøízení "
-"podporováno. Více informací naleznete v souboru \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\". Pokud máte HP LaserJet 1100 nebo 1200, lze skenovat "
-"pouze v pøípadì, ¾e máte nainstalovánu podporu pro skenování.\n"
-"\n"
-"Nepou¾ívejte pro toto zaøízení \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Naèítám data k tisku ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Pøenést konfiguraci tiskárny"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Konfiguraci tiskárny, kterou jste provedli pro frontu %s lze pøenést na "
-"frontu %s, tj. na souèasnou frontu. V¹echna nastavená data (jméno tiskárny, "
-"popis, umístìní, typ pøipojení a dal¹í výchozí nastavení) budou pøepsána, "
-"ale tiskové úlohy nebudou pøeneseny.\n"
-"Ne v¹echny fronty lze pøenést z následujích dùvodù:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tiskárny na serverech Novell nebo tiskárny, které posílají "
-"data na skupinu pøíkazù.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podporuje pouze místní tiskárny, vzdálené tiskárny LPD a tisk na "
-"tiskárny pøes sockety/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ani LPRng nepodporují IPP tiskárny.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Tiskové fronty, které nebyly vytvoøeny tímto programem nebo pøes \"foomatic-"
-"configure\" nelze pøenést."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Také tiskárny pou¾ívající PPD soubory od jejich výrobcù nebo tiskárny s "
-"nativními ovladaèi pro CUPS nelze pøenést."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Oznaète tiskárnu, kterou chcete pøenést a stisknìte \"Pøenést\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Nepøená¹et tiskárny"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Pøenést"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tiskárna se jménem \"%s\" ji¾ na stranì %s existuje.\n"
-"Kliknìte na \"Pøenést\" pro pøepsání.\n"
-"Taky mù¾ete napsat nové jméno nebo ji pøeskoèit."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Jméno fronty mù¾e obsahovat pouze písmena, èíslice a podtr¾ítko"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tiskárna se jménem %s ji¾ existuje,\n"
-"chcete opravdu pøepsat její konfiguraci?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nové jméno tiskárny"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Pøená¹ím %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Byla pøenesena výchozí tiskárna (\"%s\"). Má se nastavit jako výchozí také "
-"na vzdáleném tiskovém systému %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Obèerstvuji tisková data ...."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Nastavení vzdálené tiskárny"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Spou¹tím sí» ...."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Nastavit sí» nyní"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Sí» není nastavena"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Nyní zaène konfigurace vzdálené tiskárny. To vy¾aduje funkèní sí»ové "
-"spojení, ale sí» není zatím nastavena. Pokud budete pokraèovat bez nastavení "
-"sítì, nebude mo¾né pou¾ít tiskárnu, kterou po¾adujete. Jak chcete pokraèovat?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Pokraèovat bez nastavení sítì"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nastavení sítì provedené pøi instalaci nelze nyní aktivovat.  Zkontrolujte, "
-"zda je sí» dostupná po spu¹tìní systému a nastavení opravte v øídícím centru "
-"Mandrake, v sekci \"Sí» a Internet\"/\"Pøipojení\" a následnì nastavte "
-"tiskárnu také v øídícím centru v sekci \"Hardware\"/\"Tiskárna\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Sí» nefunguje a nelze ji spustit. Prosím zkontrolujte nastavení hardware. "
-"Pak se opìt pokuste provést nastavení vzdálené tiskárny."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Restartuji tiskový systém ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "vysoká"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidní"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaluji tiskový systém v bezpeènostní úrovni %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Pokou¹íte se instalovat tiskový systém %s na poèítaè, be¾ící v bezpeèností "
-"úrovni %s.\n"
-"\n"
-"Tiskový systém pracuje jako démon (proces na pozadí), který èeká na tiskové "
-"úlohy a zpracovává je. Tento démon je také pøístupný ze sítì pro jiné "
-"poèítaèe, tak¾e se mù¾e stát pøedmìtem sí»ového útoku. Proto je vybráno "
-"pouze nìkolik slu¾eb, které jsou v této úrovni spu¹tìny automaticky pøi "
-"startu.\n"
-"\n"
-"Chcete opravdu nastavit tiskový systém na tomto poèítaèi?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Spustit tiskový systém pøi startu systému"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Tiskový systém (%s) nebude automaticky spu¹tìn pøi startu poèítaèe.\n"
-"\n"
-"Je mo¾né, ¾e volba automatického startu byla vypnuta ve vy¹¹í bezpeènostní "
-"úrovni, proto¾e tiskový systém je potenciální nebezpeèí pro sí»ový útok.\n"
-"\n"
-"Chcete nastavit zpìt automatický start tiskového systému?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Ovìøují nainstalovaný software..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Odebírám LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Odebírám LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Zvolte tiskový systém pro tiskárnu"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Který tiskový systém chcete pou¾ít pro tisk?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nastavuji tiskárnu \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instaluji Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Mo¾nosti tiskárny"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pøipravuji PrinterDrake ...."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Nastavování aplikací..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Chtìli byste nastavit tiskárnu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Tiskový systém: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Jsou nastaveny následující tiskárny. Dvojitým kliknutím na ka¾dou z nich je "
-"mo¾né je modifikovat, nastavit jako výchozí, získat o nich informace nebo je "
-"nastavit na vzdáleném CUPS serveru pro vyu¾ití v aplikaci Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Jsou nastaveny následující tiskárny. Dvojitým kliknutím na ka¾dou z nich je "
-"mo¾né je modifikovat, nastavit jako výchozí nebo o nich získat informace."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Obnovit seznam tiskáren (pro získání v¹ech vzdálených CUPS tiskáren)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Zmìna tiskového systému"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normání re¾im"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Chcete nastavit dal¹í tiskárnu?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Zmìnit nastavení tiskárny"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tiskárna %s\n"
-"Co chcete zmìnit na této tiskárnì?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Provést!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Typ pøipojení pro tiskárnu"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Jméno tiskárny, popis, umístìní"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Výrobce tiskárny, model, ovladaè"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Výrobce tiskárny, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Nastavit tuto tiskárnu jako výchozí"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Pøidat tuto tiskárnu do Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Odebrat tiskárnu ze Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tisk testovací(ch) stránky(nek)"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Nápovìda pro tisk na této tiskárnì"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Odebrat tiskárnu"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Odebírám starou tiskárnu \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Výchozí tiskárna"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tiskárna \"%s\" je nyní nastavena jako výchozí."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Pøidávám tiskárnu do Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Tiskárna \"%s\" byla úspì¹nì pøidána do Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Pøidání tiskárny \"%s\" do Star Office/OpenOffice.org se nezdaøilo."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Odebírám tiskárnu ze Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Tiskárna \"%s\" byla úspì¹nì odebrána z aplikace Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Odebrání tiskárny \"%s\" ze Star Office/OpenOffice.org se nezdaøilo."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcete opravdu odebrat tiskárnu \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Odebírám tiskárnu \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Nastavení proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Vítejte v konfiguraèním nástroji pro proxy.\n"
-"\n"
-"Zde nastavujete http a ftp proxy zadáním\n"
-"pøidìleného pøihla¹ovacího jména a hesla\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Zadejte prosím hodnoty pro http proxy\n"
-"V pøípadì, ¾e nemáte http proxy, ponechejte prázdné"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL by mìlo být 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Èíslo portu musí být numerické"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Zadejte prosím hodnoty pro ftp proxy\n"
-"V pøípadì, ¾e nemáte ftp proxy, ponechejte prázdné"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL by mìlo být 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Pokud je potøeba, zadejte prosím pøihla¹ovací jméno\n"
-"a heslo. Pokud je nepotøebujete, nechte prázdné"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "heslo"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "heslo znova"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Hesla nejsou shodná. Zkuste to znovu!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nemù¾u pøidat oddíl do _naformátovaného_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nemù¾u zapsat soubor %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neuspìl"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neuspìl (mo¾ná, ¾e chybí raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Není dostatek oddílù pro RAID úrovnì %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustit zvukový systém ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron - spou¹tí opakující se akce"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd je pou¾íván pro sledování stavu baterie a zaznamenávání pøes syslog.\n"
-"Mù¾e také být pou¾it pro vypnutí poèítaèe pøi vybité baterii."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Spou¹tí pøíkazy naplánované pøíkazem na urèitý èas pøíkazem 'at'.\n"
-"Také spou¹tí pøíkazy pøi nízkém vytí¾ení systému."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardní Unixový program který spou¹tí u¾ivatelem zadané programy\n"
-"v pøedem definovaných intervalech. vixie cron má navíc mnoho vlastností,\n"
-"vèetnì vy¹¹í bezpeènosti a více mo¾ností nastavení."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM pøidává do textových programù podporu my¹i (napø pro Midnight "
-"Commander).\n"
-"Mù¾e také v konzoli provádìt operace 'vyjmi' a 'vlo¾' a ovládat pop-up menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake testuje hardware a umo¾òuje nový/zmìnìný\n"
-"hardware nastavit"
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache je WWW server. Je pou¾íván k poskytování HTML a CGI souborù."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetový superserver démon (nazývaný inetd) spou¹tí mnoho ostatních\n"
-"internetových slu¾eb, tak jak jsou zapotøebí. Odpovídá za start napø.\n"
-"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete tím i ostatní\n"
-"slu¾by které spou¹tí."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustit paketový filtr pro jádra øady 2.2, který chrání poèítaè\n"
-"proti útokùm ze sítì."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento balíèek nahraje zvolenou mapu klávesnice definovanou\n"
-"v /etc/sysconfig/keyboard. Tu lze vybrat pomocí nástroje kbdconfig.\n"
-"Pro vìt¹inu poèítaèù byste ji mìli nechat zapnutou."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatická generace hlavièky jádra v adresáøi /boot\n"
-"pro soubory /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatická detekce a konfigurace hardware pøi spu¹tìní."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf provádí rùzné úkoly pøi spu¹tìní systému\n"
-"nutné pro správu systémové konfigurace."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tiskový démon, bez kterého nebude fungovat lpr (program pro tisk).\n"
-"Je to server, který posílá ti¹tìné dokumenty jednotlivým tiskárnám."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server pou¾ívaný pro sestavení vysoce výkonného\n"
-"a dostupného serveru."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je doménový (DNS) server, který pøekládá hostitelská jména na "
-"IP adresy."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Pøipojuje a odpojuje v¹echny sí»ové (NFS), SMB (Lan/Windows) a Netware "
-"(NCP)\n"
-"pøípojné body (mount points)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje èi deaktivuje v¹echny sí»ová rozhraní, která mají nastartovat pøi\n"
-"startu systému."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je oblíbený protokol pro sdílení souborù pøes sítì TCP/IP.\n"
-"Tato slu¾ba poskytuje NFS server, jeho¾ nastavení je v /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je oblíbený protokol pro sdílení souborù pøes sítì TCP/IP.\n"
-"Tato slu¾ba poskytuje mo¾nost uzamykání souborù na NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky nastaví podporu numerické klávesnice v konzoli\n"
-"a v XFree pøi startu."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pro OKI 4w a kompatibilní wintiskárny."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Podpora PCMCIA vìt¹inou znamená podporu zaøízení jako sí»ové karty a\n"
-"modemy v laptopech. Nespustí se pokud ji pøímo nenastavíte, ale není "
-"problém\n"
-"jí mít nainstalovanou i na poèítaèích, které ji nepotøebují."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper spravuje RPC spojení, která jsou pou¾ívána protokoly jako NFS\n"
-"a NIS. Portmap server musí být spu¹tìn na poèítaèích, které fungují jako\n"
-"servery pro protokoly, které pou¾ívají mechanismus RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr "Postfix je program pro doruèování po¹ty z jednoho poèítaèe na jiný."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Ukládá a obnovuje 'stav entropie' na poèítaèi, co¾ je pou¾íváno pro\n"
-"kvalitnìj¹í generaci náhodných èísel."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Pøiøazuje pøímá zaøízení blokovým (napøíklad diskové oddíly)\n"
-"pro aplikace jako je Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Démon routed umo¾òuje automaticky obnovovat smìrovací tabulku (router "
-"table)\n"
-"pro IP adresy. K tomu pou¾ívá protokol RIP. Zatímco RIP je bì¾nì pou¾íván\n"
-"v malých sítích, pro slo¾itìj¹í sítì je zapotøebí slo¾itìj¹í protokoly."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat umo¾òuje u¾ivatelùm sítì sledovat vytí¾ení jednotlivých\n"
-"strojù pøipojených k síti."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokol rusers umo¾òuje u¾ivatelùm sítì zjistit kdo je pøihlá¹en na\n"
-"jiném poèítaèi."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokol rwho umo¾òuje vzdáleným(remote) u¾ivatelùm získat seznam\n"
-"v¹ech u¾ivatelù pøihlá¹ených na poèítaèi s démonem rwho (je to podobné\n"
-"slu¾bì finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Spustit zvukový systém pøi startu"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je program pomocí nìho¾ zaznamenává mnoho démonù správy do "
-"systémových\n"
-"log souborù. Je dobré mít spu¹tìný syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Nahrát ovladaèe pro usb zaøízení."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startuje X Font Server (to je nezbytné pro bìh XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvolte si, které slu¾by by mìli být automaticky spu¹tìny pøi startu"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Tisk"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Sdílení souborù"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Systém"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Vzdálená administrace"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databázové servery"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Sku¾by: aktivováno %d z %d registrovaných"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Slu¾by"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "spu¹tìno"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zastaveno"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Slu¾by a démoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nejsou ¾ádné dal¹í\n"
-"informace o slu¾bì, sorry."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pøi spu¹tìní"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Dìkujeme vám, ¾e jste si vybrali Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Vítejte do svìta Open Source"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Úspìch spoleènosti MandrakeSoft je zalo¾en na principech Svobodného "
-"Software. Tento operaèní systém je výsledkem spolupráce èásti celosvìtové "
-"Linuxové komunity"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Pøipojte se ke svìtu Svobodného Software"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Chcete vìdìt více o Open Source komunitì? Stát se také èlenem? Pokud chcete "
-"sdílet své vìdomosti, pomáhat vytváøet nástroje, pøipojte se do diskuzních "
-"klubù, které najdete na na¹ich stránkách \"Community\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet a zpracování zpráv"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 nabízí ten nejlep¹í výbìr software pro pøístup ke v¹emu, "
-"co nabízí Internet. S pomocí Mozilly a Konquerora mù¾ete prohlí¾et webové "
-"stránky a animace, ke ètení po¹ty a zpracování osobních informací lze pou¾ít "
-"Evolution a Kmail a vyu¾ít mno¾ství jiných programù"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimédia a grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 dovoluje naplno vyu¾ít v¹ech multimediálních schopností "
-"poèítaèe! Mù¾ete tak pøehrávat rùzné hudební soubory, editovat èi kreslit "
-"obrázky nebo fotografie, sledovat TV a video atd."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Vývoj"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 je vynikající platformou pro vývoj. Mù¾ete vyu¾ít silný "
-"GNU gcc kompilátor a dal¹í prostøedky na vývoj Open Source aplikací"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Øídící centrum Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Øídící centrum pro Mandrake Linux 8.2 poskytuje výkonné nástroje na správu a "
-"nastavení va¹eho poèítaèe"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "U¾ivatelská rozhraní"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Distribuce Mandrake Linux 8.2 nabízí 11 rùzných grafických u¾ivatelských "
-"rozhraní, vèetnì GNOME 1.4, KDE 2.2.2, Window Maker, ..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Software pro servery"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Vá¹ poèítaè lze nìkolika kliknutími my¹i zmìnit na velmi výkonný server: "
-"webový server, po¹tovní server, firewall, router, souborový a tiskový server"
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Hry"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 nabízí ty nejlep¹í Open Source hry - arkády, akèní, "
-"karetní, sportovní, strategické, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Chcete se dozvìdìt o Linuxu jednoduchou, rychlou a snadnou cestou? "
-"Poskytujeme zdarma ¹kolení Linuxu, stejnì jako testy va¹ich znalostí "
-"prostøednictvím online ¹kolícího centra MandrakeCampus"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitní podpora jak Linuxové komunity tak z firmy MandrakeSoft je ji¾ k "
-"dispozici! Staòte se \"expertem\" a mù¾ete pomáhat jak dal¹ím u¾ivatelùm tak "
-"také podporovat na¹e stránky"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Na¹i konzultanti jsou pøipraveni analyzovat po¾adavky a nabídnout øe¹ení "
-"v¹ech va¹ich IT projektù. MandrakeSoft je firma, která má velké zku¹enosti "
-"jako vydavatel distribucí a nabízí opravdovou alternativu pro IT øe¹ení v "
-"podniku"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Ná¹ elektronický obchod nabízí velké mno¾ství Linuxových øe¹ení, speciální "
-"nabídky na¹eho software a dal¹í 'lahùdky'"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Pokud chcete získat více informací o profesionálních slu¾bách fy "
-"MandrakeSoft a komerèních nabídkách, podívejte se prosím na ní¾e uvedenou "
-"webovou stránku:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaluji balíèky..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nemù¾u pøeèíst va¹i tabulku oddílù, mo¾ná je pøíli¹ naru¹ená :(\n"
-"Pokusím se pokraèovat v èi¹tìní ¹patných oddílù"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Chyba!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nemohu najít potøebný soubor '%s ' s obrazem."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Nastavení automatické instalace"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Zde mù¾ete nastavit disketu pro automatickou instalaci. Tato volba je nìkdy "
-"nebezpeèná a mìla by se pou¾ívat s opatrností.\n"
-"\n"
-"Tato disketa dovoluje zopakovat instalaci, která ji¾ na tomto poèítaèi byla "
-"provedena s tím, ¾e v nìkterých krocích lze zadat jiné hodnoty.\n"
-"\n"
-"Pro maximální bezpeènost není rozdìlování diskù ani formátování provádìno "
-"automaticky, i pøesto, pokud to pøi instalaci zvolíte.\n"
-"\n"
-"Chcete pokraèovat?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Nastavení automatických krokù"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vyberte prosím, který z krokù instalace má být proveden automaticky stejnì "
-"jako instalaèní program nebo bude ruènì zadán"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Vítejte.\n"
-"\n"
-"Parametry pro automatickou instalaci jsou pøístupné v sekci nalevo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratuluji!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa byla s úspìchem vytvoøena.\n"
-"Nyní lze provést znovu instalaci."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automatická instalace"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Pøidat polo¾ku"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Odstranit poslední polo¾ku"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"         Report programu DrackBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"             Report démonu pro DrackBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"               Detaily o reportu pro DrackBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "celkový prùbìh"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Zálohovat systémové soubory..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Zálo¾ní soubory pevného disku..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Zálohovat soubory u¾ivatelù..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Prùbìh zálohování na pevný disk... "
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Zálohovat dal¹í soubory..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"seznam souborù poslaný na FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problémy FTP spojení: nebylo mo¾né poslat data pro zálohu pøes FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Chyba pøi posílání po¹ty. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Výbìr souboru"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Vyberte soubory nebo adresáøe a kliknìte na 'Pøidat'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Zvolte prosím v¹echny volby, které potøebujete.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Tato volba zazálohuje a obnoví v¹echny soubory v adresáøi /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Zálohovat systémové soubory ( adresáø /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Pou¾ít pøírùstkovou zálohu (nepøepisovat star¹í zálohy)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Nezahrnout kritické soubory (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Tato volba dovolí obnovit rùzné verze adresáøe /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Zvolte prosím v¹echny u¾ivatele, které chcete zálohovat."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Nezahrnout cache prohlí¾eèe"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Pou¾ít pøírùstkovou zálohu (nepøepisovat star¹í zálohy)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Odstranit vybrané"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "U¾ivatelé"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Pou¾ít FTP pøipojení pro zálohu"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Zadejte prosím jméno poèítaèe nebo IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Zadejte adresáø, do kterého\n"
-" bude umístìna záloha."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Zadejte své pøihla¹ovací jméno"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Zadejte své heslo"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Pamatovat si heslo"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP pøipojení"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Bezpeèné pøipojení"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Pou¾ít pro zálohování CD/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Vyberte si velikost CD média"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Zvolte pokud pou¾íváte CDRW média"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Pokud CDRW médium nejdøíve smazat, zatrhnìte"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Pokud chcete mít spou¹tìcí CD,\n"
-" zatrhnìte tuto volbu."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Zadejte jméno va¹í vypalovaèky CD\n"
-" napø.: 1,0,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Pou¾ít páskovou jednotku"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Zadejte jméno zaøízení, na které se bude zálohovat"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Zadejte prosím maximální velikost\n"
-" povolenou pro Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Zadejte adresáø, kam bude umístìna záloha:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Pou¾ít kvóty pro zálo¾ní soubory."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Sí»"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Pevný disk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ka¾dou hodinu"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "ka¾dý den"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "ka¾dý týden"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "ka¾dý mìsíc"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Pou¾ít démona"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Vyberte si interval mezi\n"
-"jednotlivými zálohami"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Prosím zvolte si\n"
-"médium pro zálohy."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Pou¾ít pro pevný disk démona"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Pou¾ít pro sí» démona"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Ujistìte se, ¾e mezi slu¾bami je pøítomen cron démon."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Poslat report po záloze mailem na :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Co"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Kde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kdy"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Dal¹í volby"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Nastavení pro DrakBackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Vyberte si, prosím, kam chcete zálohovat."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na pevný disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "pøes sí»"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Prosím vyberte si, co chcete zálohovat"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Zálohovat systém"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Zálohovat u¾ivatele"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Vybrat u¾ivatele manuálnì"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Zdroje pro zálohu:\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systémové soubory:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Soubory u¾ivatelù:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Dal¹í soubory:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Ulo¾it na pevný disk do adresáøe: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Ulo¾it na FTP na poèítaè: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t u¾ivatelské jméno: %s\n"
-"\t\t cesta: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Volby:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNezahrnout systémové soubory\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tZálohování pou¾ívá tar a bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tZálohování pou¾ívá tar a gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Démon (%s) zahrnuje :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Pevný disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Sítí pøes FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Sítí pøes SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Pro první spu¹tìní pou¾ijte Prùvodce nebo Roz¹íøené.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Seznam dat pro obnovení:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Seznam po¹kozených dat:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Zru¹te tuto volbu pøi dal¹ím spu¹tìní."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Zálo¾ní soubory jsou po¹kozené"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "             V¹echna vybraná data byla              "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "        Úspì¹nì obnoveno na %s         "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "          Obnovit konfiguraci         "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Obnovit také ostatní soubory."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Seznam u¾ivatelù pro obnovení (od ka¾dého bude obnovena pouze poslední "
-"záloha)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Zálohovat systémové soubory pøed:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Vyberte datum obnovení zálohy"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Pou¾ít pro zálohování pevný disk"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Obnovit z pevného disku."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Zadejte adresáø, kde jsou umístìny zálohy"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Vyberte dal¹í médium, kde jsou umístìny zálohy"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Dal¹í média"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Obnovit systém"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Obnovit u¾ivatele"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Obnovit ostatní"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "vyberte cestu pro obnovu (kromì / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Provést novou zálohu pøed obnovou (pouze pro pøírùstkovou zálohu)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Odebrat adresáøe u¾ivatele pøed obnovou."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Obnovit v¹echny zálohy"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Vlastní obnova"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Nápovìda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Pøedchozí"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Ulo¾it"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Vytvoøit zálohu"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Obnovit"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Dal¹í"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Døíve ne¾ budete obnovovat, vytvoøte zálohu...\n"
-"nebo ovìøte, ¾e daná cesta je správná."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Chyba pøi posílání po¹ty\n"
-" vámi zvolený report nebyl odeslán\n"
-" Proveïte prosím nastavení sendmailu"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Seznam balíèkù pro instalaci"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Chyba pøi posílání souborù pøes FTP.\n"
-" Prosím opravte nastavení pro FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Prosím zvolte data pro obnovu..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Prosím zvolte si médium pro zálohy..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Zkontrolujte prosím data pro zálohování..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nebyl nalezen konfiguraèní soubor, \n"
-"kliknìte na Prùvodce nebo na Roz¹íøené."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Vyvíjí se... èekejte prosím."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Zálohovat systémové soubory"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Zálohovat u¾ivatelské soubory"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Zálohovat dal¹í soubory"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Celkový prùbìh"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "soubory poslané pøes FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Posílám soubory..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Seznam dat, která budou na CROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Zadejte rychlost vypalovací mechaniky"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Zadejte prosím jméno CD vypalovaèky (napø.: 1.0.0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Zvolte, pokud chcete mít instalaèní CD spustitelné."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Zálohovat z konfiguraèního souboru"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Prohlédnout konfiguraci zálohy."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Prùvodce konfigurací"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Roz¹íøená konfigurace"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Zálohovat nyní"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"Popis voleb:\n"
-"\n"
-" V tomto kroku Drakbackup mù¾e zmìnit:\n"
-"\n"
-" - Re¾im komprese:\n"
-"     \n"
-"      Pokud zvolíte bzip2, budete mít kompresi\n"
-"      lep¹í ne¾ pomocí gzip (okolo 2-10%).\n"
-"      Tato volba není zvolena jako výchozí, proto¾e\n"
-"       vy¾aduje daleko více èasu (a¾ o 1000% více).\n"
-"\n"
-" - Re¾im zálohování:\n"
-"\n"
-"       Tato volba aktualizuje zálohu, ale není moc zajímavá,\n"
-"       proto¾e pøed aktualizací musíte nejdøíve zálohu obnovit.\n"
-"       \n"
-"- pou¾ití souboru .backupignore:\n"
-"\n"
-"       Stejnì jako pro cvs, i pro Drakbackup lze uvést seznam\n"
-"       souborù v .backupignore, které budou pøi zálohování ignorovány.\n"
-"       napø.:\n"
-"              \\$> cat .backupignore\n"
-"               *.o\n"
-"               *~\n"
-"               ...\n"
-"          \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Nìkteré chyby pøi nastavení po¹ty jsou zpùsobeny\n"
-" ¹patnou konfigurací programu postfix. Pro vyøe¹ení\n"
-" nastavte myhostname a mydomain v /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"popis voleb:\n"
-"\n"
-"- Záloha systémových souborù:\n"
-"            \n"
-"\tTato volba zálohuje adresáø /etc, který obsahuje v¹echny\n"
-"\tkonfiguraèní soubory. Dávejte pozor pøi obnovì na to,\n"
-"\taby se nepøepsaly soubory:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Zálohovat soubory u¾ivatelù:\n"
-"\n"
-"\tTato volba dovoluje vybrat v¹echny u¾ivatele, které\n"
-"\t\tchcete zálohovat.\n"
-"\tAby se u¹etøilo místo na disku, není dobré zahrnout cache\n"
-"\tod prohlí¾eèe.\n"
-"\n"
-" - Zálohovat ostatní soubory:\n"
-"\n"
-"\tTato volba dovolí pøidat dal¹í data pro zálohování.\n"
-"\tV souèasnosti není mo¾né pøi tomto zálohování zvolit\n"
-"\tpøírùstkové zálohování.\t\n"
-"\n"
-" - Pøírùstkové zálohování:\n"
-"\n"
-"\tPøírùstkové zálohování je velmi mocný druh zálohování,\n"
-"\tproto¾e dovoluje zálohovat v¹echna data pouze poprvé\n"
-"\ta dále se zálohují pouze zmìny.\n"
-"\tBìhem obnovy tak budete moci zadat, od jakého data se\n"
-"\tmají data obnovit.\n"
-"\tPokud nezvolíte tuto mo¾nost, bude pøi ka¾dé záloze\n"
-"\tpøedchozí záloha smazána.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Popis voleb pro obnovu:\n"
-"\n"
-"Bude pou¾ita záloha s nejaktuálnìj¹ím datem, proto¾e pøi\n"
-"pøírùstkovém zálohování je nutné provádìt obnovu jednu\n"
-"za druhou smìrem ke star¹ím datùm.\n"
-"\n"
-"Pokud nechcete obnovit u¾ivatele, odznaète v¹echny\n"
-"jeho za¹krtávací políèka.\n"
-"\n"
-"Jinak je mo¾né si vybrat pouze jednoho z nich\n"
-"\n"
-" - Pøírùstkové zálohování:\n"
-"\n"
-"\tPøírùstkové zálohování je velmi mocný druh zálohování,\n"
-"\tproto¾e dovoluje zálohovat v¹echna data pouze poprvé\n"
-"\ta dále se zálohují pouze zmìny.\n"
-"\tBìhem obnovy tak budete moci zadat, od jakého data se\n"
-"\tmají data obnovit.\n"
-"\tPokud nezvolíte tuto mo¾nost, bude pøi ka¾dé záloze\n"
-"\tpøedchozí záloha smazána.\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Tento program je svobodný software; mù¾ete ho ¹íøit a/nebo modifikovat\n"
-" podle specifikace GNU General Public Licence, která byla publikáva\n"
-" Free Software Foundation; buï verze 2, nebo (podle volby) pozdìj¹í verze.\n"
-"\n"
-" Tento program je distribuován s nadìjí, ¾e bude u¾iteèný,\n"
-" ale BEZ JAKÝCHKOLIV ZÁRUK; BEZ NÁROKU NA PROFIT. Více detailù naleznete\n"
-" v licenci GNU General Public Licence.\n"
-"\n"
-" Kopii GNU General public Licence mù¾ete obdr¾et buï s tímto programem\n"
-" nebo si o ní mù¾ete napsat na adresu Free Software Foundation, Inc.,\n"
-" 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Popis:\n"
-"\n"
-"  Drakbackup je nástroj na zálohování systému.\n"
-"  Bìhem konfigurace mù¾ete vybrat: \n"
-"\t- Systémové soubory,\n"
-"\t- Soubory u¾ivatelù,\n"
-"\t- Ostatní soubory.\n"
-"\tnebo Celý systém a jiné (jako jsou oddíly s Windows).\n"
-"\n"
-"  Drakbackup dovoluje zálohovat na:\n"
-"\t- Pevný disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (se spu¹tìním, záchranou a autoinstalací).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Páskovou jednotku.\n"
-"\n"
-"  Drakbackup dovoluje provést obnovu do vybraného adresáøe.\n"
-"\n"
-"  Jako výchozí jsou umístìny v¹echny zálohy do adresáøe\n"
-"  /var/lib/drakbackup \n"
-"\n"
-"  Konfiguraèní soubor:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"\n"
-"Postup pøi obnovì:\n"
-"\n"
-"  Pøi provádìní obnovy odstraní Drakbackup pùvodní adresáø\n"
-"  a ovìøí, ¾e zálohované soubory nejsou po¹kozeny.\n"
-"  Doporuèuje se ale provést zálohu tìchto dat pøed provedením\n"
-"  obnovy.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"popis voleb:\n"
-"\n"
-"Buïte opatrní pøi zálohování na FTP, proto¾e na server je poslána\n"
-"pouze ji¾ vytvoøená záloha.\n"
-"Je tudí¾ vhodné nejdøíve provést zálohu na disk pøed tím, ne¾\n"
-"ji po¹lete na server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problémy pøi obnovì:\n"
-"\n"
-"Pøi obnovování Drakbackup nejdøíve ovìøuje v¹echny\n"
-"zálohované soubory.\n"
-"Pøed tím, ne¾ je soubor obnoven, provede Drakbackup výmaz\n"
-"pùvodního souboru, a tak pøijdete o v¹echna data.\n"
-"Buïte proto opatrní a nesna¾te se modifikovat zálohovaná\n"
-"data ruènì.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Popis:\n"
-"\n"
-"  Drakbackup je nástroj na zálohování systému.\n"
-"  Bìhem konfigurace mù¾ete vybrat \n"
-"\t- Systémové soubory,\n"
-"\t- Soubory u¾ivatelù,\n"
-"\t- Ostatní soubory.\n"
-"\tnebo Celý systém a jiné (jako jsou oddíly s Windows).\n"
-"\n"
-"  Drakbackup dovoluje zálohovat na:\n"
-"\t- Pevný disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (se spu¹tìním, záchranou a autoinstalací).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Páskovou jednotku.\n"
-"\n"
-"  Drakbackup dovoluje provést obnovu do vybraného adresáøe.\n"
-"\n"
-"  Jako výchozí jsou umístìny v¹echny zálohy do adresáøe\n"
-"  /var/lib/drakbackup \n"
-"\n"
-"  Konfiguraèní soubor:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"\n"
-"Postup pøi obnovì:\n"
-"\n"
-"  Pøi provádìní obnovy odstraní Drakbackup pùvodní adresáø\n"
-"  a ovìøí, ¾e zálohované soubory nejsou po¹kozeny.\n"
-"  Doporuèuje se ale provést zálohu tìchto dat pøed provedením\n"
-"  obnovy.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalace %s neuspìla. Stala se tato chyba:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Hledám instalované fonty"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Odznaèit instalované fonty"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "zpracovávám v¹echny fonty"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nebyly nalezeny ¾ádné fonty"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hotovo"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "nelze nalézt ¾ádné fonty v pøipojeném oddíle"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Znovu vybrat správné fonty"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "nelze nalézt ¾ádný font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Hledat fonty mezi instalovanými"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopie fontu"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalace fontù True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "èekejte prosím, právì bì¾í ttmkfdir... "
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Instalace True Type fontù je dokonèena"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverze fontù"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "vytváøím type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Odkazy na Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "konverze ttf fontù"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "konverze pfm fontù"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Ignorovat doèasné soubory"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Restartovat XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Ignorovat soubory s fonty"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "restart xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Pøed instalací fontù se ujistìte, ¾e máte potøebná práva na instalací a "
-"pou¾ívání na systému.\n"
-"\n"
-"- Fonty lze instalovat bì¾ným zpùsobem. Ve výjimeèných pøípadech mù¾e ¹patný "
-"font zpùsobit zamrznutí X serveru."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Zavádìní fontù"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Naèíst fonty z Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Odinstalovat fonty"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Roz¹íøené volby"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Seznam fontù"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Zvolte aplikace, které podporují fonty:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Obecné tiskárny"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vyberte soubor s fontem nebo adresáø a kliknìte na 'Pøidat'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalovat seznam"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "kliknìte zde, pokud jste si jisti."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "zde pokud si nejste jisti."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Zru¹it celý výbìr"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Vybrat v¹e"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Odebrat seznam"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Úvodní testy"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopírovat fonty do systému"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalovat & konvertovat fonty"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Poinstalaèní nastavení"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Odebrat fonty ze systému"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Nastavení po odebrání"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Sdílení Internetového Pøipojení"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Sdílení Internetového pøipojení je zapnuto"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Sdílení internetového pøipojení u¾ bylo nastaveno.\n"
-"Nyní je povoleno.\n"
-"\n"
-"Co chcete dále dìlat?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "vypnout"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "odmítnout"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "pøekonfigurovat"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Zakazuji servery..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Sdílení Internetového pøipojení je nyní vypnuto."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Sdílení Internetového pøipojení je vypnuto"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetové sdílení u¾ bylo nastaveno.\n"
-"Nyní je vypnuto.\n"
-"\n"
-"Co chcete dále dìlat?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "povolit"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Povoluji servery..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Sdílení Internetového pøipojení je nyní zapnuto."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Vá¹ poèítaè bude zkonfigurován pro sdílení pøipojení na Internet.\n"
-"Tato mo¾nost umo¾òuje pøístup dal¹ích poèítaèù na lokální síti do Internetu "
-"pøes tento poèítaè.\n"
-"\n"
-"Pozn.: potøebujete vyhrazený sí»ový adaptér pro nastavení lokální sítì (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhraní %s (pou¾ívá modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Rozhraní %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ve va¹em systému není ¾ádný sí»ový adaptér!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ve va¹em poèítaèi nebyl nalezen ¾ádný sí»ový adaptér. Spus»te prosím program "
-"pro nastavení hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Sí»ové rozhraní"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Na va¹em systému je nastaveno pouze jedno sí»ové rozhraní:\n"
-"\n"
-"%s\n"
-"\n"
-"Na tomto adaptéru bude nastavena lokální sí»."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Prosím zvolte si, ke kterému sí»ovému adaptéru bude pøipojena LAN."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Sí»ové rozhraní je ji¾ nastaveno"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varování, sí»ový adaptér  (%s) je ji¾ nastaven.\n"
-"\n"
-"Chcete ho automaticky pøenastavit?\n"
-"\n"
-"Lze to také provést ruènì, ale musíte vìdìt, co dìláte."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatické pøenastavení"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Zobrazit aktuální nastavení rozhraní"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuální konfigurace pro '%s':\n"
-"\n"
-"Sí»: %s\n"
-"IP adresa: %s\n"
-"IP atributy: %s\n"
-"Ovladaè: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Mohu zachovat souèasnou konfiguraci a pøedpokládám, ¾e máte ji¾ nastavený "
-"DHCP server; v takovém pøípadì ovìøte, ¾e je správnì nastavena lokální sí»; "
-"nebude v ní provedena ¾ádná zmìna a nebude ani zmìnìn DHCP server.\n"
-"\n"
-"Jinak mohu zmìnit jak rozhraní, tak také pøenastavit DHCP server podle "
-"potøeby.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokální sí»"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Adresa DHCP serveru"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Pøenastavení rozhraní a DHCP serveru"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Èíslo lokální síì nekonèí na .0, zkou¹ím znovu."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Na¹el jsem mo¾ný konflikt v souèasném nastavení LAN adresy pro %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Na¹el jsem existující nastavení firewallu!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varování! Bylo nalezeno existující nastavení firewallu. Po instalaci mù¾e "
-"být zapotøebí nìjaká ruèní úprava."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Nastavuji..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Nastavuji skripty, instaluji software, startuji servery..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problém s instalací balíèku %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"V¹e se podaøilo nastavit.\n"
-"Nyní lze pou¾ít tento poèítaè pro sdílení pøipojení k Internetu pro va¹i "
-"lokální sí», která pou¾ívá automatickou konfiguraci sítì (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Nastavení ji¾ bylo provedeno, ale nyní je vypnuto."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Nastavení ji¾ bylo provedeno, nyní je povoleno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Není nastaveno ¾ádné sdílení Internetového pøipojení."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Nastavení sdílení pøipojení k Internetu"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Vítá vás prùvodce nastavením sdílení pøipojení k Internetu!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknìte na Konfigurovat, pokud chcete spustit prùvodce nastavením."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastavení sítì (%d adaptéry(ù))"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Smazat profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Smazat profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nový profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Zadejte jméno vytváøeného profilu (nový profil je vytvoøen jako kopie "
-"vybraného) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Jméno poèítaèe: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Pøístup na Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Brána(gateway):"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Rozhraní:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Èekejte prosím"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Nastavuji pøístup na Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Nastavení LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ovladaè"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Rozhraní"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Nastavuji lokální sí»..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknìte pro spu¹tìní prùvodce ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Prùvodce..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Pou¾ít"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Èekejte prosím... Aktivuji konfiguraci"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Pøipojen"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nepøipojen"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Pøipojit..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Odpojit..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "Varování, bylo detekováno jiné pøipojení k Internetu, zøejmì je to sí»"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemáte nakonfigurováno ¾ádné rozhraní.\n"
-"Nastavte jej kliknutím na 'Konfigurovat'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Nastavení LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptér %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protokol o spu¹tìní"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Spustit pøi startu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivovat nyní"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivovat nyní"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Toto rozhraní je¹tì nebylo nastaveno.\n"
-"Spus»te prùvodce konfigurací z hlavního okna"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemáte ¾ádné pøipojení k Internetu.\n"
-"Vytvoøte si jej kliknutím na 'Konfigurovat'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfigurace pøipojení k internetu"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfigurace pøipojení k internetu"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Typ pøipojení:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametry"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Brána(gateway)"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernetová karta"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Úroveò zabezpeèení"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Øídící centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Zvolte si nástroj, který chcete pou¾ít"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Èína (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonsko (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonsko (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Východní Evropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irsko"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Západní Evropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Austrálie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nový Zéland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Ji¾ní Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Zadejte prosím\n"
-"typ TV normy a zemi"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norma TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Oblast :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Probíhá vyhledávání TV kanálù ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Vyhledávám TV kanály"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Nebyla nalezena TV karta!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"V poèítaèi nebyla nalezena ¾ádná TV karta. Zkontrolujte prosím, zda "
-"podporovaná karta je správnì zapojena.\n"
-"\n"
-"\n"
-"Databázi hardware lze nalézt na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pou¾ití: keyboarddrake [--expert] [klávesnice]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Jaké je rozlo¾ení va¹í klávesnice?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete, aby se klávesa BackSpace chovala v konzoli jako Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vymìnit CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Vlo¾te prosím Instalaèní CD-ROM do mechaniky a stisknìte Ok.\n"
-"Pokud CD nemáte, stisknìte Zru¹it pro pøeru¹ení aktualizace systému."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nelze spustit aktualizaci na bì¾ící systém !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Zmìny jsou provedeny, ale pro aktivaci je nutné provést logout"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Zobrazit pouze pro vybraný den"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/_Soubor/_Nový"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Soubor/_Otevøít"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Soubor/_Ulo¾it"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>U"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Soubor/Ulo¾it _jako"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Soubor/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Volby"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Volby/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Nápovìda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Nápovìda/_O aplikaci..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-iso8859-2,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-iso8859-2,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "U¾ivatel"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Zprávy"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Vysvìtlivky nástrojù Mandrake Linuxu"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "vyhledat"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Nástroj na monitorování logù"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Nastavení"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "shodných"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "neshodných"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Vyberte soubor"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendáø"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Obsah souboru"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Varovné zprávy pøes Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "èekejte prosím, zpracovávám soubor: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Nastavení upozornìní pøes Mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Vítejte v konfiguraci varovných zpráv pøes mail/SMS.\n"
-"\n"
-"Zde lze nastavit posílání varovných zpráv.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "nastavení slu¾eb"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Pokud jedna z vybraných slu¾eb nepobì¾í, obdr¾íte varovnou zprávu"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "nahrát volby"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Pokud bude hodnota vet¹í ne¾ zadané èíslo, obdr¾íte varovnou zprávu"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "nastavení varování"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Nastavuje zpùsob, jakým bude systém posílat varovné hlá¹ky"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Ulo¾it jako..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Jaký je typ va¹í my¹i?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nebylo nalezeno serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulovat tøetí tlaèítko?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s nalezeno na %s, chcete ho nastavit?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Zvolte si skener"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Skener %s není podporován"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake nebyl schopen detekovat vá¹ skener %s.\n"
-"Vyberte prosím zaøízení, ke kterému je skener pøipojen"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "vyberte zaøízení"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Skener %s musí být nastaven pomocí nástroje printerdrake.\n"
-"Spustit printerdrake lze z øídícího centra Mandrake v sekci Hardware"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Vá¹ skener %s byl nastaven.\n"
-"Nyní lze skenovat dokumenty pomocí aplikace \"XSane\" z nabídky aplikací "
-"Multimédia/Grafika."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigurace firewallu"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigurace firewallu"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Firewall je ji¾ nastaven.\n"
-"Kliknìte na Konfigurovat pro zmìnu nebo odebrání firewallu"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknìte na Konfigurovat pro standardní firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Výbìr jazyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Volba typu instalace"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekce hardiskù"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Nastavení my¹i"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Výbìr klávesnice"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpeènost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Souborové systémy"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formátování oddílù"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Výbìr balíèkù pro instalaci"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalace systému"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Pøidání u¾ivatele"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nastavení sítí"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastavení slu¾eb"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Zavádìcí program"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Startovací disketa"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nastavení X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Aktualizace systému"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Ukonèit instalaci"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfigurace tinyfirewallu\n"
-"\n"
-"Zde je mo¾né nastavit jednoduchý firewall pro Mandrake Linux.\n"
-"Pro výkonné øe¹ení firewallu pou¾ijte specializovanou\n"
-"distribuci MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nyní budete dotázáni v nìkolika otázkách na slu¾by, které chcete mít\n"
-"pøístupné z Internetu. Zamyslete se prosím dobøe nad tìmito\n"
-"otázkami, proto¾e bezpeènost poèítaèe je dùle¾itá.\n"
-"\n"
-"Pokud nepou¾íváte dále vyjmenované slu¾by, zaka¾te je prosím.\n"
-"Tyto volby lze kdykoliv zmìnit spu¹tìním této aplikace!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Potøebujete na tomto poèítaèi web server, který je pøístupný\n"
-"z Internetu? Pokud potøebujete webový server pøístupný pouze\n"
-"z tohoto stroje, odpovìzte na tuto otázku Ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Pou¾íváte na tomto serveru jmenný server? Pokud ne a nepotøebujete\n"
-"pøedávat jiným poèítaèùm informace o IP adresách, odpovìzte Ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Chcete povolit pøíchozí ssh (Secure Shell) spojení? Ssh je náhrada\n"
-"za telnet, která umo¾òuje vzdálené pøihlá¹ení. Pokud nyní\n"
-"pou¾íváte telnet, je velmi vhodné pøejít na ssh. Telnet není\n"
-"kryptovaný -- kdokoliv mù¾e zjistit heslo, pokud ho pøi telnetu\n"
-"pou¾ijete. Na rozdíl od telnetu je ssh kryptované, tak¾e není\n"
-"mo¾né, aby kdokoliv zjistil heslo."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Chcete povolit pøíchozí spojení pøes telnet?\n"
-"Je to VELMI nebezpeèné, tak jak u¾ bylo vysvìtleno na pøedchozí\n"
-"obrazovce. Dùraznì doporuèujeme odpovìdìt Ne a pou¾ít namísto\n"
-"telnetu ssh.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Chcete pou¾ít FTP server, který bude pøístupný z Internetu? Pokud ano,\n"
-"je doporuèeno jej pou¾ívat pouze pro anonymní pøístup. Proto¾e FTP\n"
-"pro pøístup nepou¾ívá ¾ádné kryptování, je mo¾né, ¾e zaslané heslo mù¾e\n"
-"získat kdokoliv, i potenciální útoèník.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Pou¾íváte mailový server? Pokud posíláte po¹tu pøes klienta pine,\n"
-"mutt nebo jiného textového klienta, tak zøejmì ano. V jiných\n"
-"pøípadech to zaka¾te na firewallu.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Pou¾íváte na tomto serveru POP nebo IMAP? Ty se pou¾ívají\n"
-"pro pøístup lidí k emailovým úètùm (ne pøes web).\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Pou¾íváte jádro verze 2.2. Pokud je sí»ová IP adresa automaticky\n"
-"pøidìlena poèítaèi doma nebo v práci (dynamické pøidìlení),\n"
-"potøebujeme tuto mo¾nost povolit. Je to tento pøípad?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Bude vá¹ poèítaè synchronizován s jiným poèítaèem?\n"
-"Vìt¹inou se to pou¾ívá v organizacích s vìt¹ím poètem Unix/Linux\n"
-"poèítaèù pro synchronizaci logování a podobnì. Pokud nejste\n"
-"souèástí vìt¹ího celku nebo jste o nièem podobném nesly¹eli,\n"
-"synchronizaci nepotøebujete."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurace je hotova. Je mo¾né zapsat tyto zmìny na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nelze otevøít %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Chyba pøi otevírání %s pro zápis: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ne, nepotøebuji DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ano, potøebuji DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ne, nepotøebuji NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ano, potøebuji NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Neukládat"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Ulo¾it & Konec"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Prùvodce konfigurací firewallu"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ne (zakázat na firewalu)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ano (povolit na firewalu)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Èekejte prosím... ovìøuji nainstalované balíèky"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Selhala instalace potøebných balíèkù : %s a Bastille.\n"
-" Pokuste se je instalovat ruènì."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sí»ový poèítaè (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kanceláø"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Pracovní stanice s Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nástroje pro vá¹ Palm Pilot nebo Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Pracovní stanice"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Doménová jména a sí»ový informaèní server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programy pro kanceláø: textové procesory (kword, abiword), tabulkové "
-"procesory (kspread, gnumeric), prohlí¾eèe pdf a dal¹í"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Nástroje pro zvuk: pøehrávaèe mp3 a midi, mixéry a dal¹í"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knihy a Howto o Linuxu a Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Pracovní stanice s KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm a dal¹í"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skupina programù pro mail, newsy, web, pøenos souborù a chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databáze"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Databázové servery PostreSQL nebo MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Nástroje pro snadnou konfiguraci poèítaèe"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utility"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentace"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolové nástroje"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Po¹tovní server postfix, server pro news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetová stanice"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimédiální stanice"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Nastavení"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Dal¹í grafické desktopy Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, základní grafické prostøedí s kolekcí doprovodných "
-"nástrojù"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafické prostøedí"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache a Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Nástroje pro vytváøení a vypalování CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kanceláøská stanice"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm a dal¹í"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafické programy jako napø. Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Knihovny pro vývoj v C a C++, programy a hlavièkové soubory"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sí»ový server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Po¹ta/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Hry"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Pøehrávaèe a editory videa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zábavné programy: deskové hry, strategie, atd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Kolekce nástrojù pro ètení a posílaní mailù (pine, mutt, tin..) a pro "
-"prohlí¾ení Webu"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivace, emulátory, minitoring"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Správa osobních financí"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafické prostøedí s u¾ivatelsky pøívìtivým seskupením aplikací a pracovní "
-"plochou"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienti pro rùzné verze protokolu ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetová brána"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy pro pøehrávání/editaci zvuku a videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Dal¹í grafické desktopy"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editory, shelly, souborové nástroje, terminály"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy na správu financí jako napø. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Správce osobních informací (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - vypalování CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vìdecká stanice"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
deleted file mode 100644
index 97fdf158a..000000000
--- a/perl-install/share/po/cy.po
+++ /dev/null
@@ -1,12371 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Dafydd Tomos <dafydd@imaginet.co.uk>, 1999
-# Rhoslyn Prys <rhoslyn.prys@ntlworld.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-11 12:35-0000\n"
-"Last-Translator: Rhoslyn Prys <rhoslyn.prys@ntlworld.com>\n"
-"Language-Team: Cymraeg/Welsh <cy@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-14\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Ffurfweddu pob pen yn annibynnol"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Defnyddiwch estyniad Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ffurfweddu cerdyn \"%s\" (%s) yn unig"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Ffurfweddiad amlben"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Mae eich system yn cynnal ffurfweddiad amlben.\n"
-"Beth hoffech ei wneud?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Cerdyn graffig"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Dewiswch gerdyn graffig"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Dewiswch wasanaethwr X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Gwasanaethwr X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Dewiswch yrrwr X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Gyrrwr X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pa ffurfweddiad oXFree hoffech ei gael?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"yn 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s \n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D ARBROFOL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"yn 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (gyrrwr gosod dangoswr)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Ffurfweddiad XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Dewiswch faint y cof eich cerdyn graffeg"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Dewiswch opsiynau ar gyfer y gwasanaethwr"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Dewiswch fonitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Y ddau paramedr pwysig yw'r raddfa adnewyddu fertigol, sef y raddfa mae'r\n"
-"holl sgrin yn cael ei adnewyddu, ac yn fwyaf pwysif y raddfa cydamseru\n"
-"llorweddol, sef y raddfa mae'r llinellau sganio'n cael eu dangos.\n"
-"\n"
-"Mae'r BWYSIG IAWN mad ydych yn enwi monitor gyda graddfa cydamseru\n"
-"sydd tu hwnt i allu eich monitor: mae modd difrodi eich monitor drwy wneud "
-"hynny.\n"
-"Os oes gennych amheuaeth, dewiswch raddfa is."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Graddfa adfywio llorweddol"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Graddfa adfywio fertigol"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor heb ei ffurfweddu"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Cerdyn graffig heb ei ffurfweddu eto"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Cydraniad heb ei ddewis eto"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ydych chi eisiau profi eich ffurfweddiad?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Rhybydd: gall profi'r cerdyn graffig hwn rewi eich cyfrifiadur"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Profi'r ffurfweddiad"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ceisiwch newid rhai paramedrau"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Digwyddodd gwall:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Gadael mewn %d eiliad"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ydi'r gosodiad hwn yn gywir?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Digwyddodd gwall, ceisiwch newid rhai paramedrau"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Cydraniad"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Dewiswch y cydraniad a'r dyfnder lliw"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Cerdyn graffeg: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Gwasanaethwr XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Rhagor"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Iawn"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modd Arbennigwr"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Dangos y cyfan"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Cydraniadau"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Gosodiad yr yr allweddell: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Math o lygoden: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dyfais  llygoden: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Cerdyn graffeg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Dynodiad y cerdyn graffeg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Cof graffeg: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dyfnder lliw: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Cydraniad: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "GwasanaethwrXFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gyrrwr XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Beth ydych eisiau ei wneud?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Newid Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Newid cerdyn Graffeg"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Dewisiadau newid Gwasanaethwr"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Newid Cydraniad"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Dangos gwybodaeth"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Profi eto"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Gadael"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Cadw'r newid?\n"
-"Y ffurfweddiad presenol yw:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X wrth ddechrau"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Hoffwn osod eich cyfrifiadur i gychwyn X yn awtomatig ar ôl cychwyn\n"
-"Hoffech chi X i ddechrau wedi i chi ail-gychwyn?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ail fewn gofnodwch i %s i wireddu'r newidiadau"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Allgofnodwch ac yna defnyddiwch Ctrl Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 lliw (8 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil o liwiau (15 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil o liwiau (16 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliwn o liwiau (24 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biliwn o liwiau (32 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "16 MB neu fwy"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA safonol, 640x480 ar 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Uwch VGA, 800x600 ar 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Cydnaws a 8514, 1024x768 rhyngleswyd ar 87 Hz (nid 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 rhyngleswyd ar 87Hz, 800x600 ar 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ar 60 Hz, 640x480 ar 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA di-rygnlesig, 1024x768 ar 60 Hz, 800x600 ar 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA Amledd Uchel, 1024x768 ar 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor sydd yn medru dangos 1600x1200 ar 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor sydd yn medru dangos 1600x1200 ar 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Adran gyntaf o'r rhaniad cychwyn"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Adran gyntaf o'r gyrrwr (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Gosodiad SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Lle ydych chi eisiau gosod y llwythwr cychwyn?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Gosodiad LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO gyda dewislen testun"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "Lilo gyda dewislen graffig"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Cychwyn o DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Prif ddewisiadau Bootloader"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader ar waith"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Gosodiad Bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dyfais cychwyn"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nid yw'n gweithio gyda hen BIOSau)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Cryno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "cryno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modd fideo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Oedi cyn cychwyn delwedd rhagosodedig"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Cyfrinair"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Cyfrinair (eto)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Cyfyngu dewisiadau llinell orchymyn"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "cyfyngu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Glanhau /tmp bob tro fyddwch yn cychwyn"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Union faint o RAM os oes angen (canfod %dMB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Galluogi aml-broffil"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Rhowch maint RAM mewn MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Dewis Nid yw 'cyfyngu dewisiadau llinell orchymyn' o werth heb gyfrinair"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Ceisiwch eto"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Nid yw'r cyfrineiriau'n cydfynd"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Neges Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Agor Oedi Cadarnwedd"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Goramser cychwyn y cnewyllyn"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Galluogi cychwyn o CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Galluogi Cychwyn OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Systm Weithredu Rhagosodedig?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Rydych wedi penderfynnu gosod y llwythwr cychwyn ar raniad\n"
-"Mae hyn yn awgrymu bod gennych lwythwr cychwyn ar ddisg caled eisoes: (ee "
-"System Commander).\n"
-"\n"
-"Gyda pha ddisg ydych chi'n cychwyn?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Dyma'r cofnodion gwahanol.\n"
-"Mae modd i chi ychwanegu rhagor neu newid y rhai presennol."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ychwanegu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gorffen"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Newid"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Pa fath o gofnod ydych chi eisiau ei ychwanegu?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Systwmau Gweithredu eraill (SunOS..)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Systemau Gweithredu Eraill (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Systemau gweithredu Eraill (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Delwedd"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Gwraidd"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Atodi"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Darllen-ysgrifennu"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabl"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Anniogel"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Rhagosodedig"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Maint intrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Tynnu cofnod"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Nid yw label gwag yn cael ei ganiatau"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Rhaid enwi delwedd cnewyllyn"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Rhaid pennu rhaniad cyfnewid"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Mae'r label hwn yn cael ei ddefnyddio eisoes"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Wedi canfod rhyngwynebau %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Oes gennych un arall?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Oes gennych rhyngwynebau %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Na"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Iawn"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Gweler gwyboadeth am galedwedd"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Gosod gyrrwr ar gyfer cerdyn %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modiwl %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pa yrrwr %s ddylwn drio?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Mewn rhai achosion, mae gyrrwr %s angen gwybodaeth ychwanegol i weithio'n\n"
-"gywir, er fel rheol mae'n gweithio'n iawn hebddo. Hoffech chi enwi'r "
-"dewisiadau\n"
-"ychwanegol ar ei gyfer neu adael i'r gyrrwr archwilio'r peiriant am y "
-"wybodaeth mae\n"
-"ei angen? Weithiau bydd yr archwilio'n atal y peiriant, ond ni ddylai achosi "
-"unrhyw\n"
-"ddifrod"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Atoholi"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Enwi dewisiadau"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Medrwch ddarparu ddewisiadau i fodiwl %s.\n"
-"Sylwer: wrth greu unrhyw gyfeiriad bydd angen defnyddio rhagddodiad 0x fel "
-"'0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Medrwch nawr ei ddewis i fodiwl. %s.\n"
-"Mae'r dewisiadau yn fformat ``name=value name2=value2 ...''.\n"
-"e.e, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Dewisiadau modiwl:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Methodd llwytho modiwl %s\n"
-"Hoffech chi drio eto gyda pharamedrau eraill?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "mynediad i raglenni  X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "mynediad i offer rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "caniatáu \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "mynediad i ffeiliau gweinyddol"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(wedi ychwanegu %s yn barod)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Mae'r cyfrinair yn rhy syml"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Rhowch enw defnyddiwr"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Rhaid i'r enw defnyddiwr gynnwys dim ond llythrennau bach, rhifau, '-' a '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Mae'r enw defnyddiwr wedi ei ychwanegu yn barod"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ychwanegu defnyddiwr"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Rhowch enw defnyddiwr\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Derbyn defnyddiwr"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Enw cywir"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Enw defnyddiwr"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Cragen"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Eicon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Awtomewngofnodi"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Medraf osod eich cyfrifiadur i fewngofnodi'nawtomatig ar gyfer un "
-"defnyddiwr\n"
-"Hoffech chi wneud hyn?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Dewis y defnyddiwr rhagosodedig:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Dewiswch y rheolwr ffenestr i rhedeg:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Dewiswch iaith i'w defnyddio."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Gallwch ddewis ieithoedd eraill fydd ar gael ar ôl gosod"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Popeth"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Caniatáu pob defnyddiwr"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Arddull"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Dim rhannu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Rhaid i becyn %s gael ei osod. Ydych chi am ei osod?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Medrwch allforio gan ddefnyddio NFS neu Samba. Pa un hoffech chi"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Mae pecyn gorfodol %s ar goll"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Dileu"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Cychwyn userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Mae rhannu yn ôl defnyddiwr yn defnyddio \"rhannu ffeiliau\" grwp.\n"
-"Mae modd defnyddio userdrake i ychwanegu defnyddiwr i'r grwp."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Croeso i Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Gwael"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Safonol"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Uchel"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Uwch"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoia"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Rhaid defnyddio'r lefel hwn a gofal. Mae'n gwneud eich system yn haws ei\n"
-"ddefnyddio ond mae'n sensitif iawn: rhaid peidio ei ddefnyddio fel peiriant "
-"i'w\n"
-"gysylltu ag eraill nag i'r Rhyngrwyd. Does dim cysylltiad drwy gyfrinair."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Mae'r cyfrinair wedi ei alluogi, ond ni argymellir ei ddefnyddio fel "
-"cyfrifiadur rhwydwaith."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dyma'r safon sy'n cael ei argymell ar gyfer diogelwch cyfrifiadur fydd yn "
-"cael ei gysylltu â'r Rhyngrwyd fel cleient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Mae rhai cyfyngiadau, ac mae rhagor o wiriadau awtomatig yn cael eu rhedeg "
-"bob nos"
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Gyda'r lefel diogelwch hwn, mae defnydd y system fel gwasanaethwr yn "
-"bosibl.\n"
-"Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel gwasanaethwr sy'n "
-"derbyn\n"
-"cysylltiad gan amryw o gleientiaid. Sylwer: os mae cleient yn unig yw eich "
-"peiriant ar y Rhyngrwyd, yna mae'n well i chi ddewis lefel is."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Wedi ei seilio ar y lefel flaenorol, ond mae'r system yn hollol gaeëdig.\n"
-"Mae nodweddion diogelwch ar eu uchaf."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Dewiswch lefel diogelwch"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Lefel diogelwch"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Defnyddiwch libsafe ar gyfer gwasanaethwyr"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Llyfrgell sy'n diogelu rhag gorlif byffer ac ymosodiadau llinellau fformatio."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Croeso i %s y dewiswrsytemau gweithredu! \n"
-"\n"
-"Dewiswch system weithredu o'r rhestr uchod neu\n"
-"arhoswch %d eiliad am gychwyn rhagosodedig\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Croeso i GRUB, y dewiswr systemau gweithredu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Defnyddiwch allweddi %c a %c i ddewis pa gofnod i'w amlygu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Gwasgwch Enter i gychwyn y system weithredu, 'g' i olygu'r"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "gorchmynion cyn cychwyn, neu 'o' am y llinell orchymyn."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Bydd y cofnod wedi ei amlygu'n cychwyn yn awtomatig ymhen %d eiliad."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "dim digon o le yn /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Penbwrdd"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Dewislen Cychwyn"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Nid oes modd gosod y llwythwr cychwyn ar adran %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nid yw cymorth wedi ei weithredu eto.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Ffurfweddu'r Math o Gychwyn"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ffeil"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ffeil/_Gadael"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor Categoreiddio Math Newydd"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor Math Newydd"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor traddodiadol"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ Traddodiadol"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Cychwyn Auora wrth gychwyn y cyfrifiadur"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modd Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modd Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ryych yn defnyddio %s fel Rheolwr Cychwyn.\n"
-"Cliciwch Ffurfweddu i gychwyn dewin gosod"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Ffurfweddu"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modd System"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Cychwyn y system  X-Window o'r cychwyn"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Na, tydw i ddim eisiau awto-mewngofnodi"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iawn, rwyf eisiau awto-mewngofnodi gyda (defnyddiwr, penbwrdd)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Iawn"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "maethu agor/etc/inittab ar gyfer darllen: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d munud"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 munud"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d eiliad"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Nid wyf yn medru creu lluniau o'r sgrin cyn rhannu"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Bydd lluniau o'r sgrin ar gale ar ôl gosod yn %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ffrainc"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Gwlad Belg"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Gweriniaeth Tsiec"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Yr Almaen"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Groeg"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norwy"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sweden"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Yr Iseldiroedd"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Yr Eidal"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Awstria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Yr Unol Daleithiau"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Gwnewch gopi wrth gefn o'ch data yn gyntaf"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Darllenwch yn ofalus!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Os ydych yn bwriadu defnyddio aboot, gofalwch adael lle gwag (2048 sector yn "
-"ddigon)\n"
-"ar ddechrau'r ddisg."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Gwall"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Dewin"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Dewiswch weithred"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Mae gennych un rhaniad FAT mawr\n"
-"(yn cael ei ddefnyddio gan Microsoft Dos/Windows\n"
-"Awgrymaf eich bod yn newid maint y rhaniad\n"
-"(cliciwch arno, ac yna clicio \"Newid maint\"]"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Cliciwch ar raniad"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Manylion"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "jwrnaleiddiwyd FS?"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Gwag"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Arall"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Mathau ffeil-system:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Creu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Math"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Defnyddiwch \"%s\" yn lle hynny"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Dileu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Defnyddiwch \"Dad-osod\" yn gyntaf"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Wedi newid y math o raniad %s bydd yr holl ddata ar y rhaniad yn cael ei "
-"golli"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Dewiswch raniad"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Dewiswch rhaniad arall"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Gadael"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Cyffredinol > Arbennigwr"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Arbennigwr > Cyffredinol"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Dadwneud"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Parhau beth bynnag?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Gorffen heb arbed"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Gorffen heb ysgrifennu y tabl rhaniadau?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ydych eisiau cadw newidiadau /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Awto ddynodi"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Clirio i gyd"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Gwybodaeth am y ddisg caled"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Alla'i ddim ychwanegu unrhyw raniadau ychwanegol"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "I gael mwy o raniadau, dilëwch un er mwyn gallu creu rhaniad estynedig"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Cadw'r tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Adfer y tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Achub y tabl rhaniadau"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ail-lwytho'r tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Cyfrwng symudadwy'n awto-osod"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Dewiswch ffeil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Nid oes gan y tabl rhaniad wrth gefn yr un maint\n"
-"Parhau?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Rhybudd"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Rhowch flopi yn y disg-yrrwr\n"
-"Mi fydd yr holl wybodaeth ar y fflopi yma yn gael ei ddileu"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Yn trio achub y tabl rhaniadau"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Gwybodaeth fanwl"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Pwynt gosod"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Dewisiadau"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Newid maint"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Symud"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Fformatio"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Gosod"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ychwanegu i RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ychwanegu i LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Dad-osod"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Tynnu o RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Tynnu o LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Newid RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Defnyddiwch ar gyfer cylchol"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Creu rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector dechreuol: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Maint mewn MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Math o ffeilsystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Pwynt gosod:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Dewis"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Tynnu'r ffeil cylch-ol?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Newid math y rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Pa fath o system ffeil  ydych chi eisiau?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Newid o ext2 i ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Lle'r hoffech chi odod y ffeil cylch-ol %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Lle ydych am osod dyfais %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Methu dad setio'r pwynt gosod gan fod y rhaniad yn cael ei ddefnyddio ar "
-"gyfer cylch-ol\n"
-"Tynnu'r cylch-ol yn gyntaf"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Cyfrifo ffiniau system ffeiliau FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Newid maint"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Nid oes modd newid maint y rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Dylai'r holl ddata ar y rhaniad gael ei ategu"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ar ôl newid maint rhaniad %s, bydd yr holl ddata ar y rhaniad yma yn cael ei "
-"golli"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Dewiswch y maint newydd"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Maint mewn MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Pa sector hoffech chi symud iddo?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Symud"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Yn symud rhaniad.."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Dewis RAID presennol i ychwanegu iddo"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "newydd"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Dewis LVM presennol i ychwanegu iddo"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Enw LVM"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Niid oes modd defnyddio'r rhaniad ar gyfer cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Enw ffeil cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Rhowch enw ffeil"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Mae'r ffeil yn cael ei ddweis eisoes gam gylch-ol arall, dewiswch un arall"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Mae'r ffeil yn bodoli eisoes. Defnyddiwch hwn?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Dewisiadau gosod"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Amrywiol"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dyfais"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "lefel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "maint darn"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Byddwch ofalus: mae'r weithred hon yn beryglus"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Pa fath o rhaniad %s"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Mae'n flin gen i ond ni alla'i dderbyn creu /boot mor bell o ddechrau'r disg "
-"(ar silindr > 1024).\n"
-"Naill ai nad ydych yn defnyddio LILO a ddim angen /boot neu byddwch yn "
-"defnyddio LILO a ni fydd yn gweithio."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Mae'r rhaniad rydych wedi dewis ychwanegu fel y gwraidd (/) wedi'i leoli yn "
-"bellach na 1024ed silindr eich disg a nid oes gennych rhaniad /boot.\n"
-"Os ydych yn bwriadu defnyddio y rheolwr bwtio LILO, nodwch fe ddylech greu "
-"rhaniad /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Rydych wedi dewis meddalwedd rhannu RAID fel gwraidd (/)\n"
-"Nid oes llwythwr cychwyn yn medru trin hwn heb rhaniad /boot\n"
-"Cofiwch ychwanegu rhaniad /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Mae tabl rhaniad disg-yrrwr %s am gael ei ysgrifennu i'r disg!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Mi fydd angen i chi ail-fwtio cyn i'r newidiadau gymeryd lle"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Wedi fformatio rhaniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Fformatio"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Yn fformatio ffeil cylch-ol %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Cuddio ffeiliau"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Mae cyfarwyddiadur %s eisoes yn cynnwys peth data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copïo %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Tynnu %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Mae rhaniad %s yn cael ei alw'n %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dyfais: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Llythyren disg-yrrwr yn DOS: %s (dim ond dyfalu)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Math: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Enw :"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Dechrau: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Maint: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d i silindr %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Wedi fformatio\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Heb ei fformatio\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Gosodwyd\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Ffeil(iau) Cylch-ol:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Y rhaniad i'w bwtio fel rheol\n"
-"    (ar gyfer bwt MS-DOS, nid ar gyfer lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Lefel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Maint darn %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disg RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Enw ffeil cylch-ol: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mwy na thebyd rhaniad Gyrrwr\n"
-"yw'r rhaniad hwn. Gwell gadael\n"
-"llonnydd iddo.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Mae'r rhaniad Bootstrap\n"
-"hwn ar gyfer cychwyniad\n"
-"dwbl eich system\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Maint: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Gwybodaeth:"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Diag LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Math tabl rhaniad: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ar fws %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Dewisiadau: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Allwedd amgryptio system ffeil : "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Dewiswch eich allwedd amgryptio system ffeiliau"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Mae'r allwedd amgryptio'n rhy syml ( mae'n rhaid bod o leiaf %d nod o hyd)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Nid yw'r allweddi amgryptio'n cydfynd"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Allwedd amgryptio"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Allwedd amgryptio (eto)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Newid y math"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Cliciwch ar gyfrwng"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Chwiliwch am wasanaethwyr"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "mi fethodd y %s fformatio o %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nid wyf yn gwybod sut i fformatio %s ym math %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "methodd gosod rhaniad %s yng gnhyfeiriadur %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "methodd fdisk gyda cod gadael %d neu arwydd %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gwall dadosod %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "syml"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "gyda /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Gwasanaethwr"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Does dim modd defnyddio JFS ar rhaniadau llai na 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Does dim modd defnyddio ReiserFS ar gyfer rhaniadau llai na 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Rjhaid i bwyntiau gosod gynnwys / arweiniol"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Mae yna eisoes raniad gyda pwynt gosod %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Rhesymegol LVM ar gyfer pwynt gosod %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dyai'r cyfeiriadur aros o fewn y system ffeilio gwraidd"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Mae angen gwir system ffeilio (ext2, reiserfs) ar gyfer y pwynt gosod\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Rhesymegol LVM ar gyfer pwynt gosod %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nid oes digon o le ar gyfer awtoddynodi"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Dim i'w wneud"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gwall wrth agos %s ar gyfer ysgrifennu %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Digwyddodd gwall - ni chanfyddwyd dyfeisiadau dilys i greu systemau ffeil "
-"arnynt. Gwiriwch eich caledwedd am ffynhonell yr anhawster."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Does gennych chi ddim rhaniadau!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"Mae GNU/Linux yn system aml-ddefnyddiwr, ac mae hyn yn golygu bod pob\n"
-"defyddiwr yn medru cael ei ddewisiadau ei hun, ei ffeiliau ei hun ac yn y "
-"blaen.\n"
-"Gallwch ddarllen yr \"User Guide\" i ddysgu mwy. Ond yn anhebyg i \"gwraidd"
-"\", sef\n"
-"y gweinyddwr, ni fydd modd i'r defnyddiwr fyddwch yn eu creu yma'n medru\n"
-"newid dim ond eu ffeiliau a'u ffurfweddiad ei hun. Bydd rhaid i chi greu un\n"
-"defnyddiwr cyffredin ar gyfer chi eich hun. Dyma'r cyfrif ddylech "
-"mewngofnodi\n"
-"iddo ar gyfer defnydd bob dydd. Er ei fod yn ymarferol iawn i fewngofnodi "
-"fel\n"
-"\"root\" gall fod yn beryglus iawn!. Gall y camgymeriad lleiaf olygu nad yw "
-"eic\n"
-"system yn gweithio ragor. Os wnewch chi gamgymeriad mawr  fel defnyddiwr\n"
-"cyffredin, byddwch ond yn colli rhywfaint o wybodaeth, ac nid y system "
-"gyfan.\n"
-"Yn gyntaf rhowch eich enw go iawn. Dose dim rhaid, wrth gwrs  - mae modd\n"
-"i chi rhoi beth bynnag hoffech chi. Bydd DraX yn cymryd yr enw cyntafa'i roi "
-"yn\n"
-"yr \"Enw defnyddiwr\" Dyma'r enw bydd y defnyddwr hwn yn ei ddefnyddio i\n"
-"fewngofnodi i'r system. Mae modd ei newid.  Yna rhowch gyfrinair. Nid yw\n"
-"cyfrianair defnyddiwr cyffredin mor bwysig ag un \"gwraidd\" o safbwynt "
-"diogelwch\n"
-"ond nid yw hynny'n rheswm i'w esgeuluso - wedi'r cyfan mae eich ffeiliau "
-"mewn\n"
-"perygl\n"
-"\n"
-"Os wnewch chi glicio \"Derbyn Defnyddiwr\", bydd modd ychwanegu fanint\n"
-"fynnoch. Ychwanegwch ddefnyddiwr ar gyfer pob un o'ch ffrindiau: eich tad\n"
-"neu eich chwaer, e.e. Ao ôl ychwanegu'r holl ddefnyddwyr, cliciwch \"Gorffen"
-"\".\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn caniatáu i chi newid y \"gragen\" "
-"rhagosodedig\n"
-"ar gyfer y defnyddiwr hwnnw (bash yw'r rhagosodedig)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Dyma'r rhaniadau Linux sydd wedi canfod ar eich disg caled\n"
-"Gallwch gadw'r dewisiadau sydd wedi eu gwneud gan y dewin, mae'n nhw'n iawn\n"
-"ar gyfer y rhanfwyaf o osodiadau. Os ydych am wneud newidiadau, rhaid i chi "
-"ol eiaf\n"
-"ddiffinio rhaniad gwraidd (\"/\"). Peidiwch dewis rhaniad sy'n rhy fach neu "
-"fyddwch\n"
-"yn methu llwytho digon o feddalwedd. Os hoffech gadw eich data ar raniad "
-"arall,\n"
-"bydd angen i chi greu rhaniad ar gyfer \"/home\"( ond dim ond os oes mwy nag "
-"un\n"
-"rhaniad Linux ar gael)\n"
-"Mae pob rhaniad yn cael ei restri fel hyn: \"Enw\", \"Maint\".\n"
-"\n"
-"Mae \"Enw\" yn cael ei drefnu: \"math o ddisg caled\", rhif y disg caled\",\n"
-"\"rhif rhaniad\" (e.e, \"hda1\").\n"
-"\n"
-"\"Math o ddisg caled\" yw \"hdos mai disg caled IDE sydd gennych a\n"
-"\"sd\" os mai SCSI yw'r disg caled.\n"
-"\n"
-"Mae \"Rhif Disg Caled\" yn lythyren ar ôl \"hd\" neu \"sd\". Ar gyfer\n"
-"disg caled IDE mae:\n"
-"\n"
-" * \"a\" yn golygu \"prif ddisg caled ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"b\" yn golygu \"disg caled gwas ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"c\" yn golygu \"prif ddisg caled ar yr ail reolwr IDE\",\n"
-"\n"
-" * \"d\" yn golygu \"disg caled gwas ar yr ail reolwr IDE\".\n"
-"\n"
-"Gyda disgiau caled SCSI, mae \"a\" yn golygu \"ID SCSI isaf \", a \"b\" yn "
-"golygu\n"
-"\"ID SCSI ail isaf\", ag ati."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mae gosodiad Mandrake Linux ar gael ar draws nifer o CD-ROM. Mae DrakX\n"
-"yn gwybod os yw pecyn penodol wedi ei leoli ar CD-ROM arall a bydd yn bwrw\n"
-"allan yr CD cyfredol a gofyn am y llall.."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Mae'n amser penderfynu pa raglenni rydych am eu gosod ar eich\n"
-"system. Mae yna filoedd o becynnau ar gael ar gyfer Mandrake Linux, ond\n"
-"does dim disgwyl i chi wybod amdanyn nhw i gyd.\n"
-"\n"
-"Os ydych chi'n gwneud gosodiad safonol o'r CD-ROM, bydd gofyn i chi\n"
-"ddweud pa CDau sydd gennych. Gwiriwch labeli'r CDau ac amlygu'r blychau\n"
-"sy'n cyfateb i'r CDau sydd gennych ar gyfer y gosodiad. Cliciwch \"Iawn\"\n"
-"pan ydych yn barod i barhau.\n"
-"\n"
-"Mae'r pecynnau wedi eu didoli yn grwpiau sy'n cyfateb i ddefnydd penodol\n"
-"ar eich peiriant. Mae'r grwpiau wedi eu rhannu yn bedair adran:\n"
-"\n"
-" * \"Man Gwaith\": os ydych yn bwriadu defnyddio eich peiriant fel man\n"
-"gwaith yna dewiswch un o'r grwpiau cyfatebol.\n"
-"\n"
-" * \"Datblygiadol\": os yw'r peiriant yn cael ei ddefnyddio i raglenni, "
-"dewiswch\n"
-" y grwpiau perthnasol\n"
-"\n"
-" * \"Gwasanaethwr\": os ydych am i'r peiriant gael ei ddefnyddio fel\n"
-"gwasanaethwr bydd modd i chi ddewis y gwasanaethau cyffredin rydych am\n"
-"eu cael ar eich peiriant.\n"
-"\n"
-" * \"Amgylchedd Graffigol\": dyma'r lle i ddewis eich amgylchedd graffigol.\n"
-"Rhaid dewis o leiaf un er mwyn cael man gwaith graffigol!\n"
-"\n"
-"Bydd symud cyrchwr y llygoden dros enw grwp yn amlygu esboniad byr am y\n"
-"grwp hwnnw. Os ydych wedi dad-ddewis pob grwp wrth wneud gosodiad\n"
-"arferol ac nid uwchraddiad), bydd dialog yn ymddangos a chynnig\n"
-"dewisiadau amrywiol ar gyfer y gosodiad lleiaf\n"
-"\n"
-" * \"Gyda X\" Gosod y nifer lleiaf o becynnau i gael penbwrdd graffigol\n"
-"i weithio.\n"
-"\n"
-" * \"Gyda dogfennaeth elfennol\" Gosod y system sylfaenol yn ogystal\n"
-"a gwasanaethau elfennol a'u dogfennau. Mae'r gosodiad hwn yn addas\n"
-"ar gyfer gosod gwasanaethwr.\n"
-"\n"
-" * \"Gosodiad bychan iawn\" Gosod y lleiafswm posibl i greu system Linux\n"
-"llinell orchymyn weithredol. Tua 65MB o faint.\n"
-"\n"
-"Mae clicio blwch \"Dewis pecynnau unigol\". yn ddefnyddiol os ydych\n"
-"yn gyfarwydd gyda'r pecynnau sy'n cael eu cynnig neu os ydych eisiau\n"
-"rheolaeth lwyr dros yr hyn sy'n cael ei osod\n"
-"\n"
-"Os ydych wedi cychwyn y gosodiad ym modd \"Diweddaru\", bydd modd i\n"
-" chi ddad-ddewis pob grwp er mwyn osgoi gosod unrhyw becyn newydd.\n"
-"Mae hyn yn ddefnyddiol ar gyfer trwsio neu ddiweddaru system sy'n bod "
-"eisoes.\n"
-" "
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Yn olaf, yn dibynnu ar eich dewis o becynnau unigol, bydd coeden yn cynnwys\n"
-"yr holl becynnau wedi eu dosbarthu yn ôl grwp ac is grwp. Wrth bori'r "
-"goeden,\n"
-"gallwch ddewis grwp cyfan, isgrwp neu becyn unigol.\n"
-"\n"
-"Pryd bynnag fyddwch wedi dewis pecyn ar y goeden, bydd disgrifiad yn\n"
-"ymddangos ar y dde. Pan fyddwch wedi gorffen dewis , cliciwch y botwm\n"
-" \"Gosod\" fydd yn cychwyn y drefn osod. Gan ddibynnu ar gyflymder eich\n"
-"caledwedd a'r nifer o becynnau i'w gosod, gall gymryd peth amser i'w "
-"gwblhau.\n"
-"Bydd amser tan orffen yn cael ei ddangos ar y sgrin er mwyn i chi weld a "
-"oes\n"
-"amser i wneud paned!\n"
-"\n"
-"!! Os oes pecyn gwasanaethwr wedi ei ddewis yn fwriadol neu am ei fod yn "
-"rhan\n"
-"o grwp cyfan, bydd angen i chi gadarnhau eich bod eisiau i'r gwasanaethwyr\n"
-"gael eu gosod. Ym Mandrake Linux mae unrhyw wasanaethwr sydd wedi ei\n"
-"osod yn cael ei gychwyn fel rhagosodiad wrth gychwyn. Hyd yn oed os ydynt\n"
-"yn ddiogel a doedd dim materion pryder pan gafodd y dosbarthiad ei ryddhau,\n"
-"mae'n bosibl i fylchau diogelwch gael eu darganfod wedi i'r fersiwn hwn o\n"
-"Mandrake Linux gael ei gwblhau. Os nad ydych yn gwybod beth mae\n"
-"gwasanaeth arbennig i fod i'w wneud na pham mae wedi ei osod, yna cliciwch\n"
-"\"Na\". Bydd clicio \"Iawn\" yn gosod y gwasanaethau hynny a byddant yn\n"
-"cael eu cychwyn yn ddiofyn drwy ragosodiad!!\n"
-"\n"
-"Mae'r dewis \"Dibyniad Awtomatig\"yn analluogi'r deialog rhybudd sy'n\n"
-"ymddangos bob tro fydd y gosodwr yn dewis pecyn yn awtomatig.\n"
-"Mae hyn yn digwydd am ei fod wedi penderfynu ei fod angen bodloni\n"
-"dibyniad gyda phecyn arall er mwyn cwblhau'r gosodiad yn llwyddiannus\n"
-"\n"
-"Mae'r eicon disg medal bychan ar waelod y rhestr yn caniatáu llwytho'r\n"
-"rhestr pecynnau dewiswyd yn ystod gosodiad blaenorol. Bydd clicio\n"
-"ar yr eicon hwn yn gofyn i chi osod yn y peiriant disg meddal grëwyd ar\n"
-"ddiwedd gosodiad arall. Gwelwch yr ail neges o'r cam diwethaf ar sut i\n"
-"greu disg meddal o'r fath."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Dyma eich cyfle i gysylltu gyda'r rhyngrwyd/rhwydwaith.Os hoffech chi\n"
-"gysylltu eich cyfrifiadur i'r Rhyngrwyd neu i rwydwaith lleol, cliciwch\n"
-"\"Iawn\" . Bydd awtoganfod dyfeisiadan rhwwydwaith a modem yn\n"
-"cychwyn. Os yw'r canfod yn methu, dad-diciwch y blwch \"Defnyddiwch\n"
-"awto ganfod\" y tro nesaf. Mae gennych y dewis i beidio ffurfweddi eich\n"
-"rhwydwaith, neu i'w wneud rhywbryd eto. Os fell, cliciwch y botwm  \"Diddymu"
-"\".\n"
-"\n"
-"Cysylltiadau posib: modem traddodiadol,modem IDSN, cyswllt ADSL,\n"
-"modem cable ac yn olaf cyswllt LAN syml (Ethernet).\n"
-"\n"
-"Byddwn ni ddim yn mynd i fanylion y ffurfweddiad yma. Gwnewch yn siwr\n"
-"fod gennych yr holl fanylion gan eich darparwr gwasanaeth rhyngrwyd (ISP)\n"
-"neu weinyddwr system\n"
-"\n"
-"Mae modd i chi edrych ar bennawd yn y llawlyfr ar gyswllt a'r Rhyngrwyd am\n"
-"fanylion ffurfweddiad, neu aros nes i'ch system gael ei osod a defnyddio'r\n"
-"rhaglen sydd yno i ffurfweddu eich cyswllt.\n"
-"\n"
-"Os ydych am ffurfweddu eich rhwydwaith yn hwyrach ar ôl y gosodiad neu\n"
-"os ydych wedi gorffen ffurfweddi eich cyswllt a'r rhwydwaith, yna cliciwch\n"
-"\" Diddymu.\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Mae modd i chi ddewis pa wasanaethau rydych am eu cychwyn\n"
-"wrth gychwyn eich cyfrifiadur.\n"
-"\n"
-"Dyma'r holl wasanaethau sydd ar gael gyda'r gosodiad cyfredol. Darllenwch\n"
-"y rhestr yn ofalus a dad-diciwch y rhai nad oes eu hangen bob tro wrth "
-"gychwyn.\n"
-"\n"
-"Mae modd cael esboniad byr am wasanaeth wrth eu dewis. Ond, os nad ydych\n"
-"yn siwr a yw'r gwasanaeth o werth neu beidio, mae'n well cadw at y drefn\n"
-"rhagosodedig\n"
-"\n"
-"!!Mae angen i chi fod yn ofalus iawn os ydych am ddefnyddio eich peiriant\n"
-"fel gwasanaethwr: mwy na thebyg na fyddwch eisiau cychwyn unrhyw\n"
-"wasanaethau nad oes eu hangen. Cofiwch bod cael nifer o wasanaethau\n"
-"wedi eu galluogi ar y gwasanaethwr, fod yn beryglus. Yn gyffredinol,\n"
-"mae'n well dewis dim ond y gwasanaethau mae'n rhaid eu cael.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr "Mae gGNU/Linux yn rheoli amser drwy GMT (Greenwich Mean Time)"
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (am X Window System) yw calon rhag wyneb graffigol GNU/Linux\n"
-"y mae pob amgylchedd graffig megis KDE, Gnome, AfterStep\n"
-"WindowMaker ag ati, sydd o fewn Mandrake Linux, yn dibynnu. Yn yr\n"
-"adran hon bydd DrakX yn ceisio ffurfweddu  X yn awtomatig.\n"
-"\n"
-"Mae'n anarferol iddo fethu oni bai bod y caledwedd yn hen iawn (neu yn\n"
-"newydd iawn). Os yw'n llwyddo, bydd yn cychwyn X ar y  X cydraniad\n"
-"gorau posibl yn ddibynnol ar faint y monitor. Bydd ffenestr yn ymddangos\n"
-"gan ofyn os ydych yn ei weld.\n"
-"\n"
-"Os ydych yn gwneud gosodiad \"Arbenigwr\", byddwch yn defnyddio'r \n"
-"dewin ffurfweddu  X. Gwelwch yr adran gyfatebol o'r llawlyfr am ragor o\n"
-"wybodaeth am y dewin.\n"
-"\n"
-"Os ydych yn medru gweld y neges ac ateb \"Iawn\", yna bydd DrakX yn\n"
-"mynd ymlaen i'r cam nesaf. Os nad ydych yn gweld y neges mae'n golygu\n"
-"bod y ffurfweddiad yn anghywir a daw i ben ymhen 10 eiliad, gan adfer y "
-"sgrin."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Efallai na fyddwch yn fodlon iawn gyda dagosiad ffurfweddiad X y tro\n"
-"cyntaf fyddwch yn ei ddefnyddio (sgrin yn rhy fach, i un ochr, ag ati)\n"
-"Felly mae DrakX yn gofyn i chi os yw'r ffurfweddiad yn iawn. Bydd\n"
-"hefyd yn cynnig ei newid drwy gynnig restr o foddau dilys daeth o hyd\n"
-"iddynt, i chi gael dewis un.\n"
-" \n"
-"Os nad ydych yn medru cael  X i weithio, dewiswch \" Newid cerdyn graffig"
-"\",\n"
-"dewiswch \"Cerdyn heb ei restri\", ac yna wrth ddewis gwasanaethwr, dewis\n"
-"\"FBDev\". Mae hwn yn ddewis diogelwch sy'n gweithio gydag unrhyw gerdyn\n"
-"graffig modern. Dewiswch \" Profwch eto\" i fod yn siwr."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Yn y diwedd bydd gofyn i chi ddewis os ydych am weld rhyngwyneb graffig\n"
-"wrth gychwyn y cyfrifiadur. Sylwch y bydd y cwestiwn hwn yn cael ei ofyn\n"
-"hyd yn oed os nad ydych yn dewis profi'r ffurfweddiad. Yn amlwg, byddwch\n"
-"am ateb \"Na\" os yw eich peiriant i weithredu fel gwasanaethwr, neu os\n"
-"nad oeddech yn llwyddiannus yn cael eich dangosydd i ffurfweddu'n gywir.."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mae gan yr CD-ROM Mandrake Linux modd achub. Gallwch ei gyrraedd drwy\n"
-"gychwyn y peiriant o'r CD-ROM, gwasgu'r fysell >>F1<< o'r cychwyn a theipio\n"
-" >>rescue<<wrth yr anogwr. Ond os nad yw eich cyfrifiadur yn medru cychwyn\n"
-"drwy'r CD-ROM dylech ddod yn ôl i'r cam hwn am gymorth mewn o leiaf dwy "
-"sefyllfa:\n"
-"\n"
-" *wrth lwytho'r llwythwr cychwyn, bydd DrakX yn ailysgrifennu'r adran bwtio "
-"[MBR]\n"
-"ar eich prif ddisg [oni bai eich bod yn defnyddio rheolwr cychwyn arall] fel "
-"eich bod\n"
-"yn medru cychwyn yn Windows neu GNU/Linux [gan gymryd bod gennych Windows\n"
-"ar eich system]. Os fyddwch angen ailosod Windows, bydd proses osod "
-"Microsoft yn\n"
-"ail ysgrifennu'r adran bwtio, ac felly ni fydd modd i chi gychwyn GNU/"
-"Linux!\n"
-"\n"
-" * os oes anhawster yn codi ac nid ydych yn medru cychwyn GNU/Linux o'r "
-"ddisg\n"
-"caled, y ddisg feddal fydd yr unig ffordd i gychwyn GNU/Linux.Mae'n cynnwys\n"
-"nifer dda o offer i adfer y system, gwall teipio anffodus, camdeipio "
-"cyfrinair neu\n"
-"rhesymau eraill\n"
-"\n"
-"Pan fyddwch yn clicio ar y cam hwn, bydd gofyn i chi rhoi disg meddal yn y "
-"gyrrwr.\n"
-"Rhaid i'r ddisg fod yn wag neu fod dim gwahaniaeth colli'r data arno.Does "
-"dim\n"
-"angen ei fformatio gan y bydd DrakX yn ailysgrifennu'r holl ddisg."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Yn awr mae angen i chi ddewis lle ar eich disg caled i osod eich\n"
-"system weithredu Linux Mandrake. Os yw eich disg caled yn wag neu\n"
-"os oes yna system weithredol eisoes yn cymryd yr holl le sydd ar gael,\n"
-"bydd angen i chi greu rhaniadau arno.Yn y bon, mae rhannu disg caled\n"
-"yn golygu ei rhannu'n rhesymegol i greu lle i osod eich system Mandrake\n"
-"Linux newydd.\n"
-"\n"
-"Gan bo effaith y broses rannu'n ddidroi nôl gall creu rhaniadau fod yn "
-"broses\n"
-"bygythiol a straenus os ydych yn ddefnyddiwr dibrofiad. Yn ffodus, mae na\n"
-"ddewin sy'n symleiddio'r broses. Cyn cychwyn, darllenwch y llawlyfr a\n"
-"cymerwch bwyll.\n"
-"\n"
-"Os ydych yn rhedeg y gosodiad ym modd Arbenigwr, byddwch yn agor\n"
-"DiskDrake, rhaglen rhannu Mandrake Linux, sy'n caniatáu i chi wneud mân\n"
-"newidiadau i'ch rhaniadau. Gw. pennawd DiskDrake yn y llawlyfr. O'r\n"
-"rhyngwyneb gosod, gallwch ddefnyddio'r dewiniaid drwy glicio ar fotwm\n"
-"\"Dewin\" yn y ddeialog.\n"
-"\n"
-"Os oes yna raniadau wedi eu diffinio, un ai o osodiad blaenorol neu\n"
-"gan offeryn rhannu arall, dewiswch y rheini i osod eich system Linux.\n"
-"\n"
-"Os nad oes rhaniadau wedi eu diffinio, bydd angen i chi eu creu gan\n"
-"ddefnyddio'r dewin. Gan ddibynnu ar ffurfweddiad eich disg caled, mae\n"
-"nifer o ddewisiadau ar gael:\n"
-"\n"
-" * \"Defnyddiwch lle gwag\": mae'r dewis hwn yn arwain at greu rhaniadau\n"
-"awtomatig o'ch disg(iau) caled. Bydd dim cwestiynau eraill.\n"
-"\n"
-" * \"Defnyddiwch y rhaniad cyfredol\": mae'r dewin wedi canfod un neu fwy\n"
-"o raniadau Linux cyfredol ar eich disg caled. Os ydych am eu defnyddio,\n"
-"cliciwch y dewis hwn.\n"
-"\n"
-" * \"Defnyddiwch le gwag ar raniad Windows\": os yw Microsoft Windows ar\n"
-"eich disg caled ac yn cymryd y lle i gyd, bydd rhaid i chi greu lle ar gyfer "
-"data\n"
-"Linux. I wneud hynny gallwch ddileu eich rhaniad a data Microsoft Windows\n"
-"(gw. atebion\"Dileu'r ddisg gyfan\" neu \"Modd Arbenigwr) neu ail-lunio "
-"maint\n"
-"rhaniad Microsoft Windows. Mae modd ail lunio maint y rhaniad heb golli "
-"data.\n"
-"Argymhellir gwneud hyn os ydych am ddefnyddio Mandrake Linux a Microsoft\n"
-"Windows ar yr un cyfrifiadur.\n"
-"\n"
-"  Cyn gwneud y dewis hwn, cofiwch y bydd maint eich rhaniad Microsoft "
-"Windows\n"
-"yn llai nag yw ar hyn o bryd. Bydd gennych llai o le yn Microsoft Windows i "
-"gadw\n"
-"data neu i osod meddalwedd newydd.\n"
-"\n"
-" * \"Dileu'r holl ddisg\" os ydych am ddileu'r holl ddata a rhaniadau "
-"presennol\n"
-"ar eich disg caled a'u cyfnewid am system Mandrake Linux, yna dewiswch hwn.\n"
-"Byddwch yn ofalus wrth wneud hyn gan na fydd modd troi'n ôl ar ôl "
-"cadarnhau.\n"
-"\n"
-"  !! Os ydych yn dewis hwn, byddwch yn colli'r holl ddata ar eich disg.  !!\n"
-"\n"
-" * \"Tynnu Windows\": bydd hwn yn dileu popeth o'r disg caled a chychwyn "
-"popeth\n"
-"o'r newydd, gan gynnwys creu rhaniadau newydd. Bydd yr holl ddata ar y ddisg "
-"yn\n"
-"cael ei golli\n"
-"\n"
-"  !! Os ydych yn dewis hwn, byddwch yn colli'r holl ddata ar eich disg.  !!\n"
-"\n"
-" * \"Modd Arbenigwr\": dewiswch hwn os ydych am rannu'r disg caled\n"
-"gyda llaw. Byddwch ofalus - mae'n ddewis pwerus a pheryglus. Mae modd\n"
-"i chi golli'ch holl ddata. Peidiwch dewis hwn oni bai eich bod yn gwybod "
-"beth\n"
-"ydych yn ei wneud."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Dyna ni. Mae'r gosodiad wedi ei gwblhau ac mae eich system GNU/Linux\n"
-"yn barod i'w ddefnyddio. Cliciwch \"Iawn\" i ailgychwyn y peiriant. Mae "
-"modd\n"
-"i chi gychwyn GNU/Linux neu Windows, prun bynnag sydd orau gennych\n"
-"(os oes gennych y ddwy system ar eich peiriant), gynted ag y bydd eich\n"
-"peiriant yn ail gychwyn. \n"
-"\n"
-"Mae'r botwm \"Uwch\" yn dangos dau fotwm:\n"
-"\n"
-" *\" creu disg meddal awto-gosod\": i greu disg meddal gosod fydd yn creu\n"
-"gosodiad cyflawn heb gymorth gweithredwr, yn debyg i'r gosodiad sydd\n"
-"newydd ei ffurfweddu.\n"
-"\n"
-"Sylwer bod dau ddewis gwahanol i'w gael wedi clicio'r botwm:\n"
-"\n"
-" *\"Ail chwarae\". Gosodiad rhannol awtomatig gan bod y cam o greu rhaniad\n"
-"yn cael ei hepgor.\n"
-"\n"
-" *Awtomeiddio\".Gosodiad cwbl awtomatig: mae'r disg caled wedi ei\n"
-"ailysgrifennu'n llwyr, a'r holl ddata wedi ei golli.\n"
-"\n"
-"Mae hwn yn nodwedd ddefnyddiol iawn pan yn gosod ar nifer fawr o beiriannau\n"
-"tebyg. Gw. yr adran Auto install ar ein safle gwe.\n"
-"\n"
-" *\"Cadw'r dewis o becynnau\": mae hyn yn cadw'r dewis o becynnau wnaed\n"
-"cynt. Yna wrth wneud gosodiad arall, rhowch ddisg meddal yn y gyrrwr a "
-"rhedeg\n"
-"y gosodiad gan fynd i'r sgrin cymorth drwy wasgu'r fysell [F1], a chyflwyno\n"
-">>linux defcfg=\"disg meddal\"<<.\n"
-"\n"
-"(*) Bydd angen disg meddal wedi ei fformatio fel FAT (i greu un yn GNU/"
-"Linux,\n"
-"teipiwch \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Rhaid i bob rhaniad sydd newydd eu henwi gael eu fformatio ar gyfer eu\n"
-"defnyddio (mae fformatio'n golygu creu system ffeilio)\n"
-"\n"
-"Efallai y byddwch eisiau ailfformatio rhai rhaniadau presennol i ddileu "
-"data\n"
-"sydd arnynt. Os ydych am wneud hynny, dewiswch y rhaniadau hynny hefyd.\n"
-"\n"
-"Sylwch nad oes angen ailfformatio'r holl raniadau sy'n bodoli eisoes. "
-"Rhaid \n"
-"ailfformatio'r rhaniadau sy'n cynnwys y system weithredu [megis \"/\",\"usr"
-"\"\n"
-"neu \"/var\") ond nid oes rhaid i chi ail fformatio rhaniadau sy'n cynnwys\n"
-"data rydych am ei gadw (e.e. \"/home\").\n"
-"\n"
-"Byddwch ofalus wrth ddewis rhaniadau. Ar ôl fformatio bydd yr holl ddata ar\n"
-"y rhaniadau'n cael eu dileu ac ni fydd modd ei adfer.\n"
-"\n"
-"Cliciwch \"Iawn\" pan ydych yn barod i fformatio rhaniadau.\n"
-"\n"
-"Cliciwch \"Dileu\" os ydych am ddewis rhaniad arall ar gyfer eich gosodiad\n"
-"Mandrake Linux newydd\n"
-"\n"
-"Cliciwch \"Uwch\" os ydych am ddewis rhaniadau i'w gwirio am flociau\n"
-"gwallus ar y ddisg."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Mae eich system weithredu Mandrake Linux newydd yn cael ei osod.\n"
-"Yn dibynnu ar y nifer o becynnau byddwch yn eu gosod a chyflymder\n"
-"eich cyfrifiadur, bydd yn cymryd rhwng ychydig o amser a sbel go lew.\n"
-"\n"
-"Amynedd..."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Ar yr adeg pan fyddwch yn gosod Mandrake Linux, mae'n debygol y bydd\n"
-"rhai pecynnau wedi eu diweddaru ers y rhyddhad cychwynnol. Bydd rhai \n"
-"gwallau wedi eu cywiro a materion diogelwch wedi eu datrys. I ganiatáu\n"
-"i chi fanteisio ar hyn mae cynnig i chi eu llwytho i lawr o'r rhyngrwyd.\n"
-"Dewiswch \"Iawn\" os oes gennych gyswllt gweithredol â'r rhyngrwyd,\n"
-"neu \"Na\"os ydych am osod pecynnau mwy diweddar rhywbryd eto.\n"
-"\n"
-"Bydd dewis \"Iawn\" yn dangos rhestr o leoedd o le mae modd derbyn\n"
-"diweddariadau. Dewiswch yr un agosaf atoch. Yna, bydd coeden dewis\n"
-"pecynnau yn ymddangos: Wedi i chi benderfynu ar eich dewis, cliciwch\n"
-"\"Gosod\" i estyn a gosod y pecynnau hynny neu \"Diddymu\" i beidio."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Cyn parhau dylech ddarllen amodau'r drwydded yn ofalus. Mae'n ymwneud\n"
-"â holl ddosbarthiad Mandrake Linux, ac os nad ydych yn cytuno â'r holl\n"
-"amodau, cliciwch ar fotwm \"Gwrthod\" fydd yn terfynu'r gosodiad yn syth.\n"
-"I barhau gyda'r gosodiad, cliciwch fotwm \"Derbyn\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Yma mae angen dewis lefel diogelwch ar gyfer y peiriant. Fel rheol,\n"
-"y mwyaf agored yw'r peiriant, y mwyaf pwysig yw'r data yr uchaf\n"
-"ddylai'r lefel diogelwch fod. Er hynny, mae diogelwch yn dod ar draul\n"
-"hwylustod. Gw. pennod MSEC yn y \"Reference Manual\" am\n"
-"wybodaeth ar ystyr y lefelau hyn\n"
-"\n"
-"Os nad ydych yn siwr beth i'w ddewis, dewiswch y rhagosodedig."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n"
-"eich system Mandrake Linux. Os oes rhaniadau wedi eu diffinio eisoes, un\n"
-"ai drwy osodiad blaenorol o GNU/Linux neu gan offeryn rhannu arall, mae\n"
-"modd i chi ddefnyddio'r rhaniadau presennol. Os nad, rhaid i' rhaniadau'r\n"
-"ddisg caled gael eu diffinio.\n"
-"\n"
-"I greu rhaniadau, rhaid yn gyntaf ddewis disg caled. Mae modd dewis disg\n"
-"i'w rannu drwy glicio ar \"hda\" ar gyfer y ddisg IDE cyntaf., \"hdb\" ar\n"
-"gyfer yr ail, \"sda\" ar gyfer y ddisg SCSI cyntaf, ac yn y blaen.\n"
-"\n"
-"I greu'r rhaniad, mae modd defnyddio'r dewisiadau hyn:\n"
-"\n"
-" *\"Clirio'r cyfan\": mae'r dewis hwn yn dileu pob rhaniad ar ddisg.\n"
-"\n"
-" *\"Awto ddynodi\": mae'r dewis hwn yn caniatáu i chi greu'n awtomatig\n"
-"Ext2 a rhaniadau cyfnewid mewn lle gwag ar eich disg.\n"
-"\n"
-" *\"Rhagor\": yn rhoi mynediad i ragor o nodweddion:\n"
-"\n"
-"   *\"Cadw'r tabl rhaniad\": mae hwn yn cadw'r tabl rhaniad i ddisg\n"
-"meddal. Mae hyn yn ddefnyddiol ar gyfer adfer tabl rhaniad, os fydd angen\n"
-"\n"
-"   \"Adfer y tabl rhaniad\": mae hyn yn caniatáu adfer tabl rhaniad "
-"blaenorol\n"
-"o ddisg meddal.\n"
-"\n"
-"   \"Achub y tabl rhaniad\": os yw eich tabl rhaniad wedi ei ddifrodi, mae "
-"modd\n"
-"ceisio ei  adfer drwy'r dewis yma. Byddwch ofalus a chofiwch fod modd iddo\n"
-"fethu.\n"
-"\n"
-"   \"Ai-lwytho'r tabl rhaniad\": mae hwn yn dileu pob newid ac yn ail "
-"lwytho'r\n"
-"tabl rhaniad gwreiddiol.\n"
-"\n"
-"   *\"awto osod cyfrwng symudol\": dad-diciwch y dewis hwn i osod a dad "
-"osod\n"
-"gyda llaw, cyfryngau symudol megis disgiau meddal ac CD-ROMau\n"
-"\n"
-"   *\"Dewin\": defnyddiwch y dewis hwn os ydych am ddefnyddio'r dewin i "
-"rannu\n"
-"eich disg caled. Dyma'sydd orau os nad oes gennych wybodaeth sylweddol ar\n"
-"rhannu\n"
-"\n"
-"   *\"Dadwneud\": defnyddiwch y dewis hwn i ddileu eich newidiadau\n"
-"\n"
-"    *\"Newid o'r modd arferol/arbenigwr\": mae hwn yn caniatáu "
-"gweithredoedd\n"
-"pellach ar raniadau. (Math, dewisiadau, fformat) ac mae'n cynnig mwy o\n"
-" wybodaeth.\n"
-"\n"
-"   *\"Gorffen\":pan fyddwch wedi gorffen rhannu eich disg, bydd hwn yn cadw\n"
-" eich newidiadau yn ôl i'r ddisg\n"
-"\n"
-"Sylwer: mae modd cyrraedd y dewisiadau drwy'r bysellfwrdd. Symudwch drwy'r\n"
-" rhaniadau gan ddefnyddio [Tab] a'r saethau [I Fyny/I Lawr].\n"
-"\n"
-"Pan fydd rhaniad wedi ei ddewis, medrwch ddefnyddio:\n"
-"\n"
-" *Ctrl-c i greu rhaniad newydd (pan fo rhaniad gwag yn cael ei ddewis);\n"
-"\n"
-" *Ctrl-d i ddileu rhaniad;\n"
-"\n"
-" *Ctrl-m i greu pwynt gosod;\n"
-"\n"
-"I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch "
-"y\n"
-" pennawd ar ext2fs yn y ``Reference Manual''.\n"
-"\n"
-"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" HFS\n"
-" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr "
-"yaboot.\n"
-"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n"
-"gall fod yn le defnyddiol i gadw cnewyllyn sbâr a delweddau ramdisk ar "
-"gyfer\n"
-" sefyllfaoedd cychwyn argyfyngus!"
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mae mwy nag un rhaniad Microsoft wedi ei ganfod ar eich disg caled.\n"
-"Dewiswch ba un rydych am newid ei faint er mwyn gosod eich\n"
-"system weithredu Mandrake Linux newydd\n"
-"\n"
-"Mae pob rhaniad wedi ei restri fel hyn: \"Enw Linux\", \"Enw Microsoft\",\n"
-"\"Maint\".\n"
-"\n"
-"Mae \"Enw Linux\" wedi ei strwythuro fel hyn: \"math o ddisg caled\", \n"
-"\"rhif y disg caled\", \"rhif y rhaniad\" (e.e., \"hda1\").\n"
-"\n"
-"\"hd\" yw'r \"Math o ddisg caled\" os mai disg caled IDE sydd gennych\n"
-"a \"sd\" yw disg caled SCSI.\n"
-"\n"
-"Llythyren wedi'r \"hd\" neu \"sd\" yw'r \"Rhif disg caled\" bob tro.\n"
-"Gyda disgiau caled IDE:\n"
-"\n"
-" * mae \"a\" yn golygu \"prif ddisg caled ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"b\" yn golygu \"ddisg caled gwas ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"c\" yn golygu \"prif ddisg caled ar yr ail reolydd IDE\",\n"
-"\n"
-" * mae \"d\" yn golygu \"ddisg caled gwas ar yr ail reolydd IDE\",\n"
-"\n"
-"Gyda disgiau caled SCSI mae \"a\" yn golygu'r \"enw SCSI isaf\", ac mae\n"
-" \"b\" yn golygu'r \"ail enw SCSI isaf\", ag ati.\n"
-"\n"
-"Mae \"Enw Windows\" yn cyfeirio at y llythyren y disg caled o dan\n"
-" Windows (\"C:\" yw'r ddisg  neu raniad cyntaf)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Amynedd... Gall y weithred hon gymryd rhai munudau."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Mae DrakX am wybod a ydych am wneud gosodiad rhagosodedig.\n"
-"Hwn sy'n cael ei (\"Argymell\") neu a ydych eisiau mwy o reolaeth\n"
-" (\"Arbenigwr\"). Mae gennych hefyd y dewis o wneud gosodiad newydd neu\n"
-" uwchraddio system Mandrake Linux cyfredol.\n"
-"\n"
-" *\"Gosod\" Mae hwn yn dileu'r hen system yn llwyr. Mewn gwirionedd, yn\n"
-"dibynnu ar ffurf eich peiriant, bydd modd cadw rhai hen raniadau (Linux neu\n"
-"eraill) heb eu newid.\n"
-"\n"
-" *\"Uwchraddio\" Mae'r gosodiad yn caniatáu i chi uwchraddio'r pecynnau\n"
-"sydd wedi eu gosod ar eich system Mandrake Linux. Bydd yn cadw'r rhaniadau\n"
-"cyfredol ar eich disg caled yn ogystal â ffurfweddiad defnyddwyr. Mae pob\n"
-"cam ffurfweddiad arall ar gael fel mewn gosodiad arferol.\n"
-"\n"
-" *\"Uwchraddio Pecynnau'n Unig\" Mae hwn yn ddewis newydd i ganiatáu\n"
-"uwchraddio system Mandrake Linux cyfredol tra'n cadw'r holl ffurfweddiad\n"
-"system heb ei newid. Mae ychwanegu pecynnau newydd i'r system hefyd \n"
-"yn bosibl.\n"
-"\n"
-"Dylai'r uwchraddiad weithio gyda systemau Mandrake Linux yn cychwyn\n"
-"o rifyn \"8.1\" \n"
-"\n"
-"Gan ddibynnu ar eich gwybodaeth am GNH/Linux, dewiswch un o'r canlynol:\n"
-"\n"
-" *Argymhellir: dewiswch hwn os nad ydych wedi gosod system weithredu\n"
-"GNU/Linux o'r blaen. Bydd y gosod yn hawdd a bydd ond rhaid i chi ateb\n"
-"rhai cwestiynau\n"
-"\n"
-" *Arbenigwr: os oes gennych wybodaeth drylwyr am GNU/Linux, mae modd\n"
-"i chi ddewis y math yma o osodiad. Bydd hwn yn caniatáu i chi osod y system\n"
-"yn ôl eich gofynion eich hun. Bydd ateb rhai o'r cwestiynau'n anodd os nad\n"
-"oes gennych wybodaeth drylwyr o GNU/Linux, felly peidiwch â dewis hwn os\n"
-" nad ydych yn gwybod beth rydych yn ei wneud."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Fel arfer mae DrakX yn dewis y bysellfwrdd cywir ar eich cyfer ( gan "
-"ddibynnu pa\n"
-" iaith rydych wedi ei ddewis) ac ni fyddwch yn gweld y cam hwn. Er hynny,\n"
-"efallai nad oes gennych fysellfwrdd sy'n cyfateb yn union i'ch iaith: e.e., "
-"os ydych\n"
-"yn Americanwr sy'n siarad Cymraeg, efallai eich bod am gadw eich "
-"bysellfwrdd\n"
-"Americanaidd. Neu os ydych yn siarad Cymraeg ac yn byw yn Hong Kong mae'r\n"
-" un sefyllfa'n codi. Yn y ddwy achos bydd angen i chi fynd yn ôl i'r cam yma "
-"yn y\n"
-" gosodiad a dewis y bysellfwrdd perthnasol o'r rhestr.\n"
-"\n"
-"Cliciwch ar fotwm \"Rhagor\" i dderbyn y rhestr lawn o fysellfyrddau sy'n "
-"cael eu\n"
-" cynnal.\n"
-" "
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Dewiswch eich dewis iaith ar gyfer y gosod a'r defnydd o'r system\n"
-"\n"
-"Bydd clicio ar y botwm \"Uwch\" yn caniatáu i chi ddewis ieithoedd eraill "
-"i'w\n"
-" gosod ar eich peiriant gwaith. Bydd dewis ieithoedd eraill yn gosod "
-"ffeiliau\n"
-" penodol sy'n cynnwys dogfennaeth a rhaglenni yn yr ieithoedd hynny.\n"
-"Er enghraifft, os ydych yn westeiwr ar gyfer defnyddwyr o Sbaen, dewiswch \n"
-" Gymraeg fel y brif iaith yn golwg coeden ac yn yr adran Uwch cliciwch ar "
-"y \n"
-"seren lwyd sy'n cyfateb i \"Spaeneg|Sbaen\". \n"
-"\n"
-"Sylwer bod modd gosod myw nag un iaith. Unwaith i chi ddewis unrhyw \n"
-"leoleiddiad ychwanegol cliciwch y botwm \"Iawn\" i barhau."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Drwy ragosodiad mae DrakX yn cymryd bod gennych lygoden dau fotwm a bydd yn "
-"ei osod i efelychu botwm tri. Bydd DrakX yn gwybod yn awtomatig p'un a'i "
-"yw'n lygoden PS/2, cyfresol neu USB.\n"
-"\n"
-" Os hoffech chi bennu math arall o lygoden, dewiswch y math priodol o'r "
-"rhestr.\n"
-"\n"
-"Os byddwch yn dewis llygoden ar wahân i'r rhagosodedig, byddwch yn gweld "
-"ffenestr profi'r llygoden. Defnyddiwch y botymau a'r olwyn i wneud yn siwr "
-"fod y gosodiadau'n gweithio. Os nad yw'r llygoden yn gweithio'n iawn pwyswch "
-"ar y bylchwr neu [Return] i \"Dileu\" a dewis eto."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Dewiswch y porth cywir. Mae porth \"COM1\" o dan MS Windows yn cael ei alw "
-"yn\n"
-"\"ttyS0\" yn GNU/Linux, e.e."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Mae hwn yn fan pwysig ynghylch diogelwch eich system GNU/Linux; rhaid\n"
-"rhoi cyfrinair \"root\".\"root\" yw gweinyddwr y system a'r unig un sydd â'r "
-"hawl\n"
-"i wneud diweddariadau, ychwanegu defnyddwyr, newid ffurfweddiad cyffredinol\n"
-"y system, ac yn y blaen. Yn fyr mae \"root\" yn medru gwneud popeth! Dyna\n"
-"pam mae'n rhaid dewis cyfrinair sy'n anodd ei ddyfalu - bydd DrakX yn dweud\n"
-" wrthych os yw'n rhy hawdd. Fel y gwelwch, mae modd peidio gorfod cynnig\n"
-" cyfrinair, ond rydym yn argymell yn erbyn hyn, hyd yn oed am un rheswm:\n"
-" peidiwch â meddwl bod eich systemau gweithredu eraill yn ddiogel rhag\n"
-" camgymeriadau, gan eich bod wedi cychwyn o GNU/Linux. Gan fod \"root\" yn\n"
-" medru goresgyn unrhyw gyfyngiadau a dileu data'n anfwriadol ar bob "
-"rhaniad,\n"
-" drwy fynd at y rhaniadau'n ddi-hid, yna mae'n bwysig ei gwneud hi'n anodd "
-"bod\n"
-" yn \"root\".n\n"
-"Dylai'r cyfrinair fod yn gyfuniad o rifau a llythrennau ac o leiaf 8 nod o "
-"hyd.\n"
-" Peidiwch ysgrifennu'r cyfrinair ar bapur - bydd yn ei gwneud hi'n rhy "
-"hawdd\n"
-" gwanhau'r system.\n"
-"\n"
-"Er hynny, peidiwch â gwneud y cyfrinair yn rhy hir neu gymhleth am fod rhaid "
-"i\n"
-"chi fedri ei gofio heb ormod o drafferth.\n"
-"\n"
-"Ni fydd y cyfrinair yn cael ei ddangos ar y sgrin wrth i chi ei deipio. "
-"Felly bydd\n"
-" rhaid i chi deipio'r cyfrinair ddwywaith i leihau'r siawns o deipio gwall. "
-"Os ydych\n"
-"yn digwydd gwneud yr un gwall teipio ddwywaith, bydd rhaid defnyddio'r "
-"cyfrinair\n"
-" \"anghywir\" i gychwyn y tro cyntaf.\n"
-"\n"
-"Yn y modd arbenigwr, bydd  gofyn os fyddwch yn cysylltu â gwasanaethwr\n"
-"dilysu, megis NIS neu LDAPl\n"
-"\n"
-"Os yw eich rhwydwaith yn defnyddio protocol LDAP (neu NIS) ar gyfer dilysu,\n"
-" dewiswch \"LDAP\" (neu \"NIS\") fel dilyswr. Os nad ydych yn gwybod,\n"
-" gofynnwch i'ch gweinyddwr system.\n"
-"\n"
-"Os nad yw eich cyfrifiadur wedi ei gysylltu i unrhyw rwydwaith wedi ei "
-"weinyddu,\n"
-" byddwch angen dewis \"Ffeiliau lleol\" ar gyfer dilysu."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"Mae LILO a grub yn llwythwyr cychwyn ar gyfer GNU/Linux. Fel rheol\n"
-"mae'r cam yma'n gwbl awtomatig. Mewn gwirionedd mae DrakX yn\n"
-"dadansoddi'r adran gychwyn ac yn gweithredu ar yr hyn mae'n ei ganfod\n"
-"yma:\n"
-" *os yw'n canfod adran gychwyn Windows mae'n gosod adran cychwyn\n"
-"grub/LILO yno yn ei le. Felly bydd modd i chi gychwyn un ai GNU/Linux\n"
-"neu system weithredu arall.\n"
-"\n"
-" *os fydd yn canfod adran gychwyn grub neu LILO, bydd yn gosod un mwy\n"
-"diweddar yn ei le.\n"
-"\n"
-"Os oes amheuaeth, bydd DrakX yn dangos blwch deialog gyda dewisiadau.\n"
-"\n"
-" * \"Llwythwr cychwyn i'w ddefnyddio\": mae gennych dri dewis:\n"
-"\n"
-"    * \"GRUB\":os mae'n well gennych grub (dewislen testun)\n"
-"\n"
-"    * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych LILO gyda'i\n"
-"rhagwyneb graffigol.\n"
-"\n"
-"    * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych rhagwyneb "
-"dewislen\n"
-"testun.\n"
-"\n"
-" * \"Dyfais cychwyn\": yn y rhan fwyaf o achosion ni fyddwch yn newid\n"
-"y rhagosodedig (\"/dev/hda\"), ond os mae'n well gennych, gall y llwythwr\n"
-"cychwyn gael ei osod ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd yn oed "
-"ar\n"
-"ddisg meddal (\"/dev/fd0\")\n"
-" * \"Oedi cyn cychwyn y ddelwedd rhagosodedig\": wrth ail gychwyn y "
-"cyfrifiadur\n"
-"dyma'r oedi sy'n caniatáu i'r defnyddiwr ddewis o fewn y ddewislen llwythwr "
-"cychwyn,\n"
-"llwythwr cychwyn arall yn lle'r un rhagosodedig.\n"
-"\n"
-"!!Gofalwch, os nad ydych yn gosod llwythwr cychwyn, (drwy ddewis \"Diddymu\" "
-"yma),\n"
-"rhaid i chi wneud yn siwr fod gennych fodd i gychwyn eich system Linux "
-"Mandrake.\n"
-"Hefyd, gwnewch yn siwr eich bod yn gwybod beth rydych yn ei wneud cyn newid "
-"y\n"
-"dewisiadau hyn!!\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn y ddeialog yn cynnig nifer o ddewisiadau "
-"uwch,\n"
-"sydd yn cael eu cadw ar gyfer y defnyddiwr arbenigol.\n"
-"\n"
-"Wedi i chi ffurfweddi baramedrau'r llwythwr cychwyn cyffredinol, bydd rhestr "
-"o\n"
-"ddewisiadau cychwyn sydd ar gael wrth gychwyn, yn cael ei gynnig i chi.\n"
-"\n"
-"Os oes yna system weithredu arall ar eich peiriant, bydd yn cael ei "
-"ychwanegu'n\n"
-"awtomatig i'r ddewislen gychwyn. Yma cewch wneud mân newidiadau i'r "
-"dewisiadau\n"
-"presennol. Dewiswch enw a chliciwch \"Newid\" i'w newid neu ei dynnu;\n"
-"\"Ychwanegu\" i greu enw newydd; a \"Gorffen\" i fynd ymlaen i'r cam nesaf "
-"o'r gosod."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"Mae LILO (the LInux LOader) a grub yn llwythwyr cychwyn: maent yn medru\n"
-"cychwyn un ai GNU/Linux neu unrhyw system weithredu arall sy'n bresennol\n"
-"ar eich cyfrifiadur. Fel rheol mae'r systemau hyn wedi eu canfod a'u gosod "
-"yn\n"
-"gywir. Os nad yw hyn yn gywir y tro yma, mae modd i chi ychwanegu cofnod\n"
-" gyda llaw ar y sgrin hwn. Byddwch ofalus i ddewis y paramedrau cywir\n"
-"\n"
-"Efallai na fyddwch eisiau rhoi mynediad i'r systemau gweithredu hyn i neb "
-"arall\n"
-"Os felly, gallwch ddileu'r cofnodion perthnasol.Ond bydd rhaid i chi greu "
-"disg\n"
-" cychwyn ar gyfer y systemau gweithredu rheini!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Rhaid i chi ddangos lle rydych am osod y wybodaeth angenrheidiol i gychwyn\n"
-"GNU/Linux\n"
-"Os nad ydych yn gwybod yn union beth rydych yn ei wneud, dewiswch \"First\n"
-"sector of drive (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Yma byddwn yn dewis system argraffu i'ch cyfrifiadur ei ddefnyddio. Efallai\n"
-"bod systemau eraill yn cynnig un i chi, ond mae Mandrake yn cynnig tri.\n"
-"\n"
-" *pdq\" - sy'n golygu \"print, don't queue\", Hwn yw'r dewis os oes gennych "
-"gysylltiad uniongyrchol â'ch argraffydd a'ch bod eisiau medru tynnu allan o "
-"waith argraffu pan mae'r papur wedi mynd yn sownd ac nad oes gennych "
-"argraffyddion wedi eu cysylltu drwy rwydwaith. Mae'n medru trin "
-"rhwydweithiau syml ac mae rhywfaint yn araf ar gyfer rhwydweithiau. Dewiswch "
-"\"pdq\" os mai dyma yw eich tro cyntaf yn GNU/Linux., mae modd i chi newid "
-"eich dewis ar ôl gosod drwy ddefnyddio PrinterDrake o Ganolfan Rheoli "
-"Mandrake a chlicio botwm arbenigwr\n"
-" *\"CUPS\" - \"Common Unix Printing System\". Mae hwn yn wych ar gyfer "
-"argraffu i argraffyddion lleol a hanner ffordd rownd y byd. Mae'n symlach, "
-"yn medru gweithredu fel gwasanaethwr neu cleient ar gyfer yr hen system \"lpd"
-"\",felly mae'n cydweddi â'r systemau sydd wedi mynd o'i flaen. Mae'n gallu "
-"gwneud nifer o driciau, ond mae bron mor syml i'w osod  \"pdq\". Os ydych "
-"amgen hwn i efelychu gwasanaethwr \"lpd\", yna rhaid cychwyn daemon \"cups-"
-"lpd\". Mae ganddo wyneb graffigol ar gyfer argraffu neu ddewis dewisiadau "
-"argraffu.\n"
-"\n"
-" *\"lprNG\" - \"line printer daemon New Generation\" Mae'r system yma'n "
-"medru gwneud yn fras yr un pethau a'r lleill, ond mae'n medru argraffu i "
-"argraffyddion ar Novell Network, gan ei fod yn cynnal protocol IPX, ac mae'n "
-"medru argraffu 'n uniongyrchol i orchmynion cragen.. Os oes angen Novell neu "
-"argraffu i orchmynion heb luniad peipen ar wahân, defnyddiwch lprNG. Yn "
-"gyffredinol, mae CUPS yn well am ei fod yn syml ac yn well wrth weithio ar "
-"draws rhwydwaith."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Mae DrakX yn canfod unrhyw ddyfais IDE sydd ar eich cyfrifiadur. Bydd yn\n"
-"chwilio am un neu fwy o gardiau SCSI PCI ar eich system. Os oes Cerdyn "
-"SCSI'n cael ei ganfod bydd DrakX yn awtomatig yn gosod y gyrrwr priodol.\n"
-"\n"
-"Oherwydd nad yw canfod caledwedd bob tro'n canfod darn o galedwedd, bydd\n"
-" DrakX yn gofyn i chi gadarnhau os oes cerdyn SCSI PCI yn bresennol. "
-"Cliciwch\n"
-"\"Oes\" os ydych yn gwybod bod cerdyn SCSI wedi ei osod ar eich peiriant. \n"
-"Bydd rhestr o gardiau SCSI'n ymddangos i chi ddewis un. Cliciwch \"Na\" os\n"
-"nad oes gennych galedwedd SCSI. Os nad ydych yn siwr, gallwch edrych ar y\n"
-" rhestr o galedwedd sydd wedi ei ganfod ar eich peiriant drwy ddewis\n"
-" \"Gwybodaeth am galedwedd\" a chlicio \"Iawn\". Edrychwch yn fanwl ar y\n"
-"rhestr a chlicio'r botwm \"Iawn\" i fynd yn ôl i'r cwestiwn rhag wyneb "
-"SCSI.\n"
-"\n"
-"Os ydych wedi pennu eich addaswr gyda llaw, bydd DrakX yn gofyn i chi s\n"
-" ydych am bennu dewisiadau ar ei gyfer. Dylech adael i DrakX ofyn i'r cerdyn "
-"am\n"
-" ddewisiadau penodol i'r cerdyn mae angen i'r caledwedd eu cychwyn. Mae hyn\n"
-"fel rheol yn gweithio'n dda\n"
-"\n"
-"Os nad yw DrakX yn medru holi am y dewisiadau sydd eu hangen, bydd rhaid i\n"
-" chi ddarparu'r dewisiadau gyda llaw. Darllenwch yr ``User "
-"Guide'' (pennod3,\n"
-" adran \"Collecting Information on Your Hardware\") am syniadau ar sut i "
-"gael y\n"
-" paramedrau angenrheidiol o ddogfennau'r caledwedd, o safle gwe'r "
-"gwneuthurwr\n"
-" (os oes gennych gysylltiad â'r Rhyngrwyd) neu oddi wrth Microsoft Windows "
-"(os\n"
-" ydych wedi defnyddio'r caledwedd gyda Windows ar eich system)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mae modd i chi gynnig cofnodion eraill ar gyfer yaboot, un ai systemau\n"
-" gweithredol eraill, cnewyll eraill, neu ddelwedd cychwyn argyfwng.\n"
-"\n"
-"Ar gyfer systemau gweithredu eraill, mae'r cofnod yn cynnwys label a'r "
-"rhaniad\n"
-" root yn unig\n"
-"\n"
-"Ar gyfer LInux, mae yna rhai dewisiadau:\n"
-"\n"
-" *Label:sef yr enw fyddwch yn ei deipio yn anogwr yaboot i ddewis y dewis\n"
-" cychwyn.\n"
-"\n"
-" *Image: hwn fydd enw'r cnewyllyn i'w gychwyn. Fel rheol, vimlinux neu\n"
-"amrywiad ohono gydag estyniad\n"
-"\n"
-" *Root: y ddyfais \"root\" neu \"/\" ar gyfer eich gosodiad Linux.\n"
-"\n"
-" *Append: ar galedwedd Apple, mae dewis atodi cnewyllyn yn cael ei\n"
-" ddefnyddio'n eithaf aml i gynorthwyo cychwyn caledwedd fideo neu i alluogi\n"
-" efelychiad o'r llygoden bysellfwrdd sydd ar goll ar yr ail a'r trydydd "
-"botwm\n"
-"llygoden llygod arferol Apple. Dyma rhai enghreifftiau:\n"
-"\n"
-"       video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: mae modd defnyddio'r dewis hwn i un ai lwytho'r modiwlau "
-"cychwynnol,\n"
-" cydnabod y ddyfais cychwyn ar gael, neu i lwytho delwedd ramdisg ar gyfer\n"
-" cychwyn argyfwng.\n"
-"\n"
-" * Initrd-size: maint y ddelwedd ramdisg arferol yw 4,096bid. Os ydych "
-"angen\n"
-"dyrannu ramdisg mawr, mae modd defnyddio'r dewis hwn.\n"
-"\n"
-" * Read-write:fel rheol mae'r rhaniad \"root\" yn cael ei agor fel darllern "
-"yn unig, i\n"
-" ganiatáu gwiriad system ffeiliau cyn i'r system ddod yn \"fyw\". Yma mae "
-"modd\n"
-" diystyru'r dewis hwn.\n"
-"\n"
-" * NoVideo: petai caledwedd Apple yn profi i fod yn peri anhawsterau "
-"sylweddol,\n"
-" mae modd i chi ddewis cychwyn mewn modd \"novideo\", gyda chynhaliaeth\n"
-" ffrâm byffer cynhenid\n"
-"\n"
-" * Default: dyma'r cyflwr rhagosodedig, dewiswch hwn drwy bwyso ENTER at\n"
-" anogwr yaboot. Bydd y cofnod hefyd wedi ei amlygu gyda \"*\", os wnewch "
-"chi\n"
-" bwyso ar [Tab] i weld dewisiadau'r cychwyn."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot yw llwythwr cychwyn ar gyfer caledwedd NewWorld MacIntosh. Mae'n \n"
-"medru cychwyn GNU/Linux, MacOS neu MacOSX os ydynt ar eich peiriant. Fel\n"
-" rheol, mae'r systemau gweithredu hyn yn cael eu canfod yn gywir a'u gosod. "
-"Os\n"
-" nad yw hyn yn digwydd, mae modd i chi ychwanegu eu cofnod gyda llaw ar y\n"
-" sgrin hwn. Byddwch ofalus i ddewis y paramedrau cywir.\n"
-"\n"
-"Prif ddewisiadau Yaboot yw:\n"
-"\n"
-" * Cychwyn Neges: neges testun sym lsy'n cael ei ddangos cyn yr anogwr\n"
-" cychwyn\n"
-"\n"
-" * Cychwyn y Ddyfais: yn dangos lle rydych am osod y wybodaeth "
-"angenrheidiol\n"
-"i gychwyn GNU/Linux. Yn gyffredinol, byddwch wedi creu rhaniad ymlwythwr yn\n"
-" gynt, i ddal y wybodaeth.\n"
-"\n"
-" * Oediad Open Firmware: yn wahanol i LILO, mae yna ddau oediad ar gael "
-"gyda\n"
-" yaboot. Mae'r cyntaf yn cael ei fesur mewn eiliadau a dyma pryd hyn mae "
-"modd\n"
-" dewis rhwng CD, cychwyn OF, MacOS neu Linux\n"
-"\n"
-" * Oediad Cychwyn y Cnewyllyn: mae'r oediad yn debyg i oediad cychwyn LILO.\n"
-"WEdi dewis Linux, bydd oediad o 0.1 eiliad cyn bod eich cnewyllyn "
-"rhagosodedig\n"
-" yn cael ei ddewis.\n"
-"\n"
-" * Galluogi Cychwyn o'r CD?: mae dewis hwn yn caniatáu i chi ddewis \"C\" "
-"am\n"
-"CD ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * Galluogi Cychwyn OF?: mae dewis hwn yn caniatáu i chi ddewis |\"N\" am\n"
-" Open Firmware ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * System Weithredu Rhagosodedig: mae modd dewis pa system weithredu fydd\n"
-"yn cychwyn drwy ragosodiad pan ddaw'r Open Firmware i ben."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Dyma amrywiol baramedrau ynghylch eich peiriant. Yn ddibynnol ar eich\n"
-"caledwedd, mae'n bosibl i chi weld y rhain, neu beidio\n"
-"\n"
-" *\"Llygoden\": edrychwch ar ffurfweddiad presennol y llygoden a chliciwch "
-"ar y\n"
-" botwm i'w newid os oes angen.\n"
-"\n"
-" *\"Bysellfwrdd\" edrychwch ar ffurfweddiad presennol y bysellfwrdd a "
-"chliciwch\n"
-"ar y\n"
-" botwm i'w newid os oes angen.\n"
-"\n"
-" *\"Cylchfa amser\" Mae DrakX, yn dyfalu eich cylchfa amser o'r iaith "
-"rydych\n"
-" wedi ei dewis. Eto fel gyda bysellfwrdd efallai nad ydych yn y wlad sy'n "
-"cyfateb i'r\n"
-" dewis iaith. Felly, mae'n bosibl y bydd angen i chi glicio ar fotwm "
-"\"Cylchfa\n"
-" amser\" i ffurfweddi'r cloc yn ôl y gylchfa amser rydych ynddi.\n"
-"\n"
-" *\"Argraffydd\": bydd clicio ar y botwm \"Dim argraffydd\" yn agor y dewin\n"
-" ffurfweddi.\n"
-"\n"
-" *\"Cerdyn sain\": os oes cerdyn sain yn cael ei ganfod ar eich system, bydd "
-"yn\n"
-"cael ei ddangos yma. Nid oes modd creu newidiadau adeg y gosodiad.\n"
-"\n"
-" *\"Cerdyn teledu\": os oes cerdyn teledu yn cael ei ganfod ar eich system, "
-"bydd\n"
-" yn cael ei ddangos yma. Nid oes modd creu newidiadau adeg y gosodiad.\n"
-"\n"
-" *\"Cerdyn IDSN\":os oes cerdyn IDSN yn cael ei ganfod ar eich system, bydd\n"
-" yn cael ei ddangos yma. Mae modd clicio ar y botwm i newid y paramedrau\n"
-" cysylltiedig."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Dewiswch y ddisg galed rydych am ei ddileu er mwy n gosod eich rhaniad\n"
-"Mandrake Linux newydd. Byddwch ofalus, bydd yr holl ddata sydd arno'n\n"
-"cael ei ddileu ac ni fydd modd ei adfer!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliciwch \"Iawn\" os ydych am ddileu'r holl ddata a rhaniadau sy'n bresennol "
-"ar y disg galed hwn. Byddwch ofalus, wedi i chi glicio \"Iawn\" ni fydd modd "
-"i chi adfer unrhyw ddata na rhaniadau presennol ar y disg caled, gan gynnwys "
-"data Windows.\n"
-"\n"
-"Cliciwch \" Diddymu\" i ddiddymu'r weithred hon heb golli unrhyw ddata a "
-"rhaniadau sy'n bresennol ar y ddisg galed."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Methu cael mynediad i fodiwlau'r cnewyllyn sy'n cyfateb i'ch cnewyllyn chi "
-"(mae ffeil %s ar goll), mae hyn yn golygu, fel arfer, nad yw eich disg "
-"cychwyn yn cydweddu gyda'r cyfrwng Gosod (crëwch ddisg cychwyn meddal newydd)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Rhaid fformatio %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Rydych wedi dewis y gwasanaethwr(wyr) canlynol: %s\n"
-"\n"
-"\n"
-"Mae'r gwasanaethwyr canlynol yn cael eu cychwyn drwy ragosodiad. Nid oes "
-"ganddynt unrhyw faterion diogelwch hysbys, ond mae'n bosibl i rai ddod i'r "
-"golwg. Os felly rhaid uwchraddio gynted ag y bo modd\n"
-"\n"
-"Ydych chi wir eisiau gosod y gwasanaethwyr hyn?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Methu defnyddio darlledu heb parth NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Nid yw 'r disg meddal hwn wedi ei fformatio i FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"I ddefnyddio'r dewis o becynnau wedi eu cadw, cychwynnwch y gosodiad gyda "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gwall wrth ddarllen ffeil %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Mae peth caledwedd ar eich cyfrifiadur angen gyrwyr \"priodol\" i weithio.\n"
-"Mae rhywfaint o wybodaeth i'w gael amdanynt yn %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Rhaid bod gennych raniad gwraidd.\n"
-"Crëwch raniad (neu glicio ar un presennol)\n"
-"Yna dewiswch weithred \"Pwynt Gosod\" a'i osod i `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Rhaid cael rhaniad cyfnewid"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nid oes gennych raniad cyfnewid\n"
-"\n"
-"Parhau beth bynnag?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Rhaid bod gennych raniad FAT wedi ei osod yn /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Defnyddiwch le gwag"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nid oes digon o le i ddynodi rhaniadau newydd"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Defnyddiwch y rhaniadau cyfredol"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nid oes rhaniad cyfredol i'w ddefnyddio"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Defnyddiwch rhaniad Windows ar gyfer cylch-ol"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pa raniad hoffech chi ei ddefnyddio ar gyfer Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Dewiswch y maint"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Maint rhaniad gwraidd mewn MB :"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Maint rhaniad cyfnewid mewn MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Defnyddiwch y lle gwag ar raniad Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Pa raniad ydych chi am newid ei faint?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Mesur ffiniau system ffeilio Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Nid yw'r newidiwr maint FAT yn medru trin eich rhaniad.\n"
-"digwyddodd y gwall canlynol: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Mae eich rhaniad Windows yn rhy ysgyriog, rhedwch \"defrag\" yn gyntaf"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"RHYBUDD!\n"
-"\n"
-"Bydd DrakX yn newid maint eich rhaniad Windows. Byddwch\n"
-"ofalus: mae gwneud hyn yn beryglus. Os nad ydych wedi\n"
-"gwneud yn barod, dylech fynd allan o'r gosod, rhedeg scandisk\n"
-"yn Windows (ac os oes modd defrag), yna ail gychwyn y gosodiad.\n"
-"Dylech hefyd wneud copi wrth gefn o'ch data.Pan rydych yn siwr, cliciwch "
-"Iawn."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Pa faint ydych am ei gadw ar gyfer Windows ar"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "rhaniad %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Methodd newid maint FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nid oes rhaniadau FAT i newid eu maint neu i'w defnyddio fel cylch-ôl (neu "
-"nad oes digon o le ar ôl)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Dileu'r ddisg gyfan"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Tynnu Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Mae gennych fwy nag un disg caled, ar ba un ydych am osod linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Bydd pob rhaniad a'u data yn cael ei ddileu ar yrrwr %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Rhannu disg unigol"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Defnyddiwch fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Medrwch rhannu %s\n"
-"Wedi gorffen, peidiwch anghofio cadw gyda 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Does gennych ddim digon o le rhydd ar eich rhaniad Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Methu canfod lle ar gyfer gosod"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Daeth dewin Rhannu DrakX o hyd i'r atebion canlynol:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Methodd rhannu: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Cychwyn y rhwydwaith"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Cau'r rhwydwaith"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Digwyddodd gwall ond wn i ddim sut i ddelio ag ef yn dwt.\n"
-"Mae'n beryglus i barhau."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pwynt gosod dyblyg %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Methodd rhai pecynnau pwysig a chael eu gosod yn gywir.\n"
-"Un ai mae eich gyrrwr CD-ROM neu eich CD-ROM yn wallus.\n"
-"Gwiriwch y CD-ROM ar gyfrifiadur wedi ei osod gan ddefnyddio \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Croeso i %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Does dim gyrrwr disg meddal ar gael"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Cychwyn cam '%s\"\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Mae eich system yn brin o adnoddau. Efallai y cewch anhawsterau wrth osod\n"
-"Mandrake Linux. Os bydd hynny'n digwydd, gallwch geisio gwneud gosodiad\n"
-"testunol. I wneud hynny, gwasgwch F1 wrth gychwyn ar y CD-ROM ac yna rhoi "
-"'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Gosod Dosbarth"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Dewiswch un o'r dosbarthiadau canlynol o osodiad::"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Cyfanswm maint y grwpiau rydych wedi eu dewis yw tua %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Os hoffech chi osod llai na'r maint hwn\n"
-"dewiswch canran y pecynnau i'w gosod.\n"
-"\n"
-"Dim ond y pecynnau pwysicaf fydd yn cael eu gosod gyda chanran\n"
-"isel; tra bydd canran o 100% yn llwytho'r holl becynnau."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Dim ond ar gyfer %d%% o'r pecynnau hyn mae gennych le.\n"
-"\n"
-"Os hoffech osod llai na hyn,\n"
-"dewiswch canran y pecynnau rydych am eu gosod.\n"
-"Dim ond y pecynnau pwysicaf fydd yn cael eu gosod gyda chanran\n"
-"isel; tra bydd canran o %d%%  yn llwytho'r gymaint o becynnau ag\n"
-"y mae modd."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Dydd modd eu dewis yn fwy penodol yn y cam nesaf."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Cyfanswm y pecynnau i'w gosod"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Dewis  y Grwp Pecyn"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Dewis pecynnau unigol."
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Cyfanswm maint: %d/%d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pecyn gwallus"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Enw: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Fersiwn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Maint: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Pwysigrwydd: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nid oes modd i chi ddewis y pecyn hwn - does dim lle ar ol i'w osod"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Mae'r pecynnau canlynol i'w gosod"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Bydd y pecynnau canlynol yn cael eu tynnu"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Does dim modd i chi ddewis/dad-ddewis y pecyn"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Mae hwn yn becyn hanfodol, does dim modd ei ddad-ddewis"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Does dim mod dad-ddewis y pecyn, mae wedi ei osod yn barod"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Rhaid i'r pecyn gael ei uwchraddio\n"
-"Ydych chi'n siwr eich bod am ei ddad-ddewis?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Does dim mod dad-ddewis y pecyn hwn. Rhaid ei ddiweddaru"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Dangoswch y pecynnau dewis awtomatig"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Gosodiad"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "LLwytho/Cadw ar ddisg meddal"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Diweddaru'r dewis pecynnau"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Gosodiad lleiaf"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Dewiswch y pecynnau hoffech chi eu gosod"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Gosod"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Amcangyfrif"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Amser yn weddill"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Arhoswch, paratoi'r gosodiad"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pecyn"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Gosod pecynnau %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Derbyn"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Gwrthod"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Newidiwch eich CD-ROM\n"
-"\n"
-"Rhowch yr CD-ROM sydd wedi ei labeli \"%s\" yn eich gyrrwr a chlicio Iawn\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi gosod o'r CD-ROM hwn."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Mynd yn ein blaen beth bynnag?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Roedd gwall wrth drefnu pecynnau"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Digwyddodd gwall wrth osod pecyn"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-" Rhybudd\n"
-"\n"
-"Darllenwch yr amodau isod yn ofalus. Os ydych yn anghytuno gydag unrhyw\n"
-" ddarn, nid oes caniatâd i chi osod y cyfrwng CD nesaf. Pwyswch 'Gwrthod' i\n"
-" barhau'r gosodiad heb ddefnyddio'r cyfryngau hyn.\n"
-"\n"
-"Nid yw rhai cydrannau ar y CDau canlynol yn cael eu rheoli gan Drwydded GPL\n"
-" neu gytundebau tebyg. Mae'r cydrannau hynny'n cael eu rheoli gan dermau ac\n"
-" amodau ei drwydded benodol ei hun. Darllenwch yn ofalus a chadwch at y\n"
-" trwyddedau penodol cyn defnyddio neu ddosbarthu'r cydrannau hynny.\n"
-"\n"
-"Mae'r trwyddedau hynny'n atal yn gyffredinol, drosglwyddiad, dyblygu (ar "
-"wahân i\n"
-" bwrpas cadw wrth gefn), dosbarthu, cildroi peirianyddol, dadcydosod,\n"
-" dadgrynhoi neu newid y cydrannau. Bydd unrhyw dorri ar yr amodau hyn yn\n"
-"terfynu eich hawl  o dan y drwydded benodol. Oni bai ei fod yn rhoi'r hawl i "
-"chi,\n"
-"nid oes modd i chi osod y rhaglenni ar fwy nag un system na'i addasu ar "
-"gyfer\n"
-" defnydd ar rwydwaith. Os oes amheuaeth, cysylltwch yn uniongyrchol â\n"
-"dosbarthwr neu olygydd y cydrannau hynny.\n"
-"Mae trosglwyddo i drydydd parti neu gopïo'r cydrannau hynny gan gynnwys y\n"
-" ddogfennaeth, wedi ei wahardd fel rheol\n"
-"\n"
-"Mae pob hawl i gydrannau'r cyfrwng CD nesaf yn perthyn i' hawduron "
-"perthnasol\n"
-" ac maent wedi eu hamddiffyn drwy gyfreithiau eiddo deallusol a hawlfraint "
-"sy'n\n"
-" berthynol i raglenni meddalwedd.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Digwyddodd gwall"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Ydych chi wir eisiau gadael y gosodiad?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Cytundeb trwyddedu"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Cyflwyniad\n"
-"\n"
-"Bydd y system weithredu a'r cydrannau gwahanol sydd o fewn dosbarthiad "
-"Mandrake Linux yn\n"
-"cael eu galw yn \"Gynnyrch Meddalwedd\" o hyn ymlaen. Mae'r Cynnyrch "
-"Meddalwedd yn\n"
-"cynnwys, ond heb eu cyfyngu, i'r  casgliad o raglenni , dulliau, rheolau a "
-"dogfennau mewn\n"
-"perthynas â'r system weithredu a chydrannau gwahanol dosbarthiad Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"1. Cytundeb Trwyddedu\n"
-"\n"
-"Darllenwch y ddogfen hon yn ofalus. Mae'r ddogfen hon yn gytundeb trwyddedu "
-"rhyngoch\n"
-"chi â MandrakeSoft S.A,. sy'n berthnasol i'r Cynnyrch Meddalwedd.\n"
-"\n"
-"Wrth osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn unrhyw fodd, "
-"rydych yn\n"
-"amlwg yn derbyn ac yn llawn cytuno i gadw at delerau ac amodau'r Drwydded "
-"hon.\n"
-"Os ydych yn anghytuno ag unrhyw rhan o'r cytundeb, ni chewch ganiatâd i "
-"osod, dyblygu\n"
-"neu ddefnyddio'r Cynnyrch Meddalwedd.\n"
-"Bydd unrhyw ymgais i osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn "
-"modd\n"
-"nad yw'n cyd-fynd â thelerau ac amodau'r Drwydded yn ddi-rym a bydd yn "
-"terfynu eich\n"
-"hawliau o dan y Drwydded hon. Ar ddiwedd y Drwydded, rhaid i chi "
-"ddinistrio'n syth pob\n"
-"copi o'r Cynnyrch Meddalwedd.\n"
-"\n"
-"\n"
-"2. Gwarant Gyfyngedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd a'r ddogfennaeth gysylltiedig yn cael eu darparu "
-"\"fel ag y maent\",\n"
-"heb ddim gwarant, hyd y mae'r gyfraith yn caniatáu.\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd ag "
-"y bydd y gyfraith yn\n"
-"caniatáu,  am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol neu "
-"anuniongyrchol (gan\n"
-"gynnwys heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled "
-"ariannol, costau cyfreithiol,\n"
-"a chosb o ganlyniad i achos llys, neu unrhyw golled o ganlyniad) yn codi o'r "
-"defnydd neu'r anallu i\n"
-"ddefnyddio'r Cynnyrch Meddalwedd, hyd yn oed os yw MandrakeSoft wedi eu "
-"cynghori o'r posibilrwydd\n"
-"o'r fath iawn.\n"
-"\n"
-"CYFRIFOLDEB CYFYNGEDIG YN GYSYLLTIEDIG GYDA'R MEDDIANT NEU'R DEFNYDD O "
-"FEDDALWEDD\n"
-" GWAHARDDEDIG MEWN RHAI GWLEDYDD\n"
-"\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd y "
-"bydd y gyfraith yn caniatáu,\n"
-"i fod yn atebol am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol "
-"neu anuniongyrchol (gan gynnwys\n"
-"heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled ariannol, "
-"costau cyfreithiol, a chosb o ganlyniad\n"
-"i achos llys, neu unrhyw golled o ganlyniad) yn codi o lwytho i lawr "
-"cydrannau meddalwedd o un o safleoedd\n"
-" Mandrake Linux, sydd wedi eu gwahardd neu eu hatal mewn rhai gwledydd gan "
-"gyfreithiau lleol. Mae'r\n"
-"cyfrifoldeb cyfyngedig hwn yn perthyn i , ond heb ei gyfyngu i'r, cydrannau "
-"cryptograffiaeth cryf sy'n cael\n"
-"eu cynnwys o fewn y Cynnyrch Meddalwedd.\n"
-"3. Trwydded GPL a Thrwyddedau Cysylltiedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd yn cynnwys cydrannau sydd wedi eu creu gan "
-"bersonau a endidau gwahanol.\n"
-"Mae'r rhan fwyaf o'r cydrannau hyn yn cael eu llywodraethu gan dermau ac "
-"amodau Trwydded Gyhoeddus\n"
-"Cyffredinol (General Public Licence (GPL)), GNU, fydd yn cael ei gyfeirio "
-"ato  o hyn ymlaen fel \"GPL\", neu\n"
-"drwyddedau cyffelyb.. Mae'r rhan fwyaf o'r trwyddedau'n caniatáu i chi "
-"ddefnyddio, dyblygu, addasu neu\n"
-" ailddosbarthu'r cydrannau maent yn eu cynnwys. Darllenwch delerau ac amodau "
-"trwydded pob cydran cyn\n"
-"eu defnyddio. Dylai pob cwestiwn am drwydded cydran gael ei ofyn i awdur y "
-"gydran ac nid i MandrakeSoft.\n"
-"Mae'r rhaglenni ddatblygwyd gan MandrakeSoft yn cael eu llywodraethu o dan "
-"Drwydded GLP. Mae'r dogfennau\n"
-" ysgrifennwyd gan MandrakeSoft S.A. yn cael eu llywodraethu gan drwydded "
-"benodol. Darllenwch y dogfennau\n"
-"am fwy o fanylion.\n"
-"\n"
-"4. Hawliau Eiddo Deallusol\n"
-"\n"
-"Mae pob hawl cydrannau'r Cynnyrch Meddalwedd yn perthyn i'w hawduron "
-"perthnasol ac wedi eu hamddiffyn\n"
-"gan gyfreithiau eiddo deallusol a hawlfraint sy'n berthnasol i raglenni "
-"meddalwedd. Mae MandrakeSoft yn cadw\n"
-"ei hawl i newid neu addasu ei Gynnyrch Meddalwedd, yn rhannol neu yn gyfan, "
-"drwy unrhyw ddull ac ar gyfer\n"
-"unrhyw bwrpas. Mae \"Mandrake\", \"Mandrake Linux\"  a'r logos cysylltiedig "
-"yn nodau masnachol sy'n\n"
-"perthyn i MandrakeSoft S.A.\n"
-"\n"
-"5. Cyfreithiau Llywodraethol\n"
-"Os bydd unrhyw rhan o'r cytundeb hwn yn cael ei ddal yn ddi-rym, "
-"anghyfreithlon neu amherthnasol gan\n"
-"benderfyniad llys, bydd y rhan yma'n cael ei dynnu o'r cytundeb hwn. Byddwch "
-"yn parhau i fod yn rhwymedig\n"
-"i adrannau cymwys o'r cytundeb.\n"
-"Mae telerau ac amodau'r Drwydded hon yn cael eu llywodraethu gan Cyfreithiau "
-"Ffrainc. Mae'n ddymunol y\n"
-"bydd pob anghytundeb ar amodau'r drwydded yn cael eu datrys y tu allan i'r "
-"llys. Fel cam olaf, bydd yranghytundeb yn cael ei drosglwyddo i'r Llysoedd "
-"Barn, Paris - Ffrainc. Am unrhyw gwestiwn ynghylch yddogfen hon cysylltwch â "
-"MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Allweddell"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Dewiswch gynllun eich alweddell"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Dyma restr lawn o'r allweddellau ar gael"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Pa ddosbarth o osodiad ydych chi ei eisiau?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Gosod/Diweddaru"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ydi hwn yn osodiad neu diweddariad?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Argymhellwyd"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Arbennigwr"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Diweddaru"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Diweddaru'r pecynnau'n unig"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Dewiswch math eich llygoden"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porth Llygoden"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Dewiswch ba  borth cyfresol mae eich llygoden wedi cysylltu iddi"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Efelychiad botymau"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Efelychiad Botwm 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Efelychiad Botwm 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Ffurfweddu cardiau PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Ffurfweddu IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "dim rhaniadau ar gael"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Sganio rhaniadau i ganfod pwyntiau gosod"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Dewiswch y pwyntiau gosod"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nid wyf yn medru darllen eich tabl rhaniad, mae'n rhy lygredig. :(\n"
-"Mae modd i mi fynd ymlaen i ddiystyru rhaniadau gwael (Bydd yr\n"
-" HOLL DDATA'n cael ei golli!).  Yr ateb arall yw peidio gadael i\n"
-"DrakX newid y tabl rhaniad. (y gwall yw %s)\n"
-"\n"
-"Ydych chi'n cytuno i golli'r holl raniadau?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Methodd DrakX a darllen y tabl rhaniad yn gywir.\n"
-"Mae'n beryglus parhau!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nid oes lle rhydd ar gyfer yr ymlwythwr 1MB! Bydd y gosodiad yn parhau, ond "
-"i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ni chanfyddwyd rhaniad gwraidd i wneud diweddariad"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rhaniad Gwraidd"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Beth yw'r rhaniad gwraidd (/) ar eich system?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bydd angen i chi ail gychwyn cyn i'r newidiadau yn eich tabl rhaniad ddigwydd"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Dewiswch y rhaniadau rydych am eu fformatio"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Gwirio blociau gwallus?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Yn fformatio rhaniadau"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creu a fformatio ffeil %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Dim digon o le cyfnewid i gyflawni'r gosodiad, ychwanegwch rhagor"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Chwilio am y pecynnau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Canfod pecynnau i'w uwchraddio"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Nid oes gan eich system ddigon o le ar ôl ar gyfer gosodiad neu uwchraddiad "
-"(%d> %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Cwblhawyd (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Lleiafswm (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Argymhellwyd (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Dewiswch llwytho neu ddewis cadw pecyn ar ddisg meddal.\n"
-"Mae'r fformat yr un ar ddisgiau meddal wedi eu cynhyrchu drwy auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Llwytho o o ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Llwytho o ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Dewis pecynnau"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Rhowch ddisg meddal yn cynnwys dewis pecynnau yn y peiriant"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Cadw ar ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Mae'r maint ddewiswyd yn fwy na'r lle ar gael"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Math o osodiad"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nid ydych wedi dewis unrhyw grwpiau o becynnau.\n"
-"Dewiswch y gosodiad lleiaf rydych ei eisiau"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Gyda X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Gyda dogfennaethelfennol (argymhellir!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Gosodiad bychan iawn (yn arbennig dim urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Os yw'r holl CDau sydd yn y rhestr gennych, cliciwch Iawn.\n"
-"Os nad oes gennych un ohonynt, Cliciwch Diddymu.\n"
-"Os mae dim ond rhai CDau sydd ar goll, yna cliciwch Iawn."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom wedi ei labelu \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Paratoi'r gosodiad"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Gosod pecyn %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Ffurfweddiad ôl osod"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Mewnosodwch y disg meddal Cychwyn ddefnyddiwyd yn gyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Rhowch y disg meddal Diweddaru Modiwlau yng ngyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Mae'n awr yn bosibl i chi lwytho meddalwedd i lawr ar gyfer amgryptio.\n"
-"\n"
-"RHYBUDD:\n"
-"\n"
-"Oherwydd gofynion cyffredinol amrywiol yn berthynol i'r meddalwedd hyn ac "
-"yn\n"
-" cael eu gosod gan amrywiol awdurdodau cyfreithiol, dylai cwsmeriaid a/neu\n"
-" ddefnyddwyr terfynol wneud yn siwr fod y cyfreithau yn eu hawdurdod "
-"cyfreithiol\n"
-" yn caniatáu iddynt lwytho i lawr, cadw a/neu ddefnyddio'r feddalwedd.\n"
-"\n"
-"Yn ogystal, dylai cwsmeriaid a/neu ddefnyddwyr terfynol fod yn arbennig o\n"
-" ymwybodol i beidio â thorri cyfraith eu hawdurdod cyfreithiol. Petai "
-"defnyddwyr\n"
-" a/neu ddefnyddwyr terfynol yn peidio parchu darpariaeth y cyfreithiau\n"
-" gweithredadwy,  yna byddant yn derbyn cosb ddifrifol.\n"
-"\n"
-"Ni fydd MandrakeSoft na'i gwneuthurwyr a/neu ddarparwyr, o dan unrhyw\n"
-" amod, fod yn gyfrifol am unrhyw ddifrod, arbennig, anuniongyrchol na\n"
-"damweiniol o gwbl (gan gynnwys, ond heb ei gyfyngu i golli elw, ymyrraeth "
-"ar\n"
-" fusnes, colli data masnachol na cholledion ariannol eraill, nag ymatebion\n"
-" terfynol a digollediad i'w dalu yn sgil penderfyniad llys) yn codi o "
-"ddefnydd,\n"
-" eiddo, neu'r unig lwytho i lawr y feddalwedd, i'r hyn y gall y cwsmer a/"
-"neu'r\n"
-" defnyddiwr terfynol gael mynediad iddo yn y pen draw wedi llofnodi'r "
-"cytundeb\n"
-" presennol.\n"
-"\n"
-"\n"
-"Am unrhyw ymholiadau yn berthnasol i'r cytundebau hyn, cysylltwch â:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Mae'n bosibl i chi llwytho i lawr y pecynnau diweddaraf sydd wedi eu ryddhau "
-"ers i'r dosbaerthiad fod ar gael.\n"
-"\n"
-"Medrwch gael atgyweiriadau diogelwch a gwallau ond mae'n rhaid i\n"
-"chi fod wedi cysyllu â'r Rhyngrwyd i barhau.\n"
-"\n"
-"Ydych chi am osod y diweddariadau?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Cysylltu â'safle Mandrake Linux i estyn rhestr o'r drychau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dewiswch ddrych lle mae modd estyn y pecynnau"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Cysylltu â'r drych i estyn y rhestr o becynnau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Pa un yw eich parth amser?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Cloc caledwedd wedi ei osod i GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Gweinydd NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Gwasanaethwr CUPS pell"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nid oes argraffydd"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "A oes gennych gerdyn sain ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Rhedwch \"sndconfig\" wedi'r gosodiad i ffurfweddu'ch cerdyn sain"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Heb ganfod cerdyn sain. Ceisiwch \"harddrake\" wedi'r gosodiad"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Crynodeb"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Llygoden"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Cylchfa amser"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Argraffydd"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Cerdyn ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Cerdyn sain"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Cerdyn Teledu"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Ffeiliau lleol"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Gosod cyfrinair gwraidd"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Dim cyfrinair"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Mae'r cyfrinair yn rhy syml ( rhaid iddo fod o leiaf %d nod o hyd)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Dilysu"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Dilysu LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Sail dn LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Gwasanaethwr LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Dilysu LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Parth NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Gwasanaethwr NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mae disg cychwyn yn darparu ffordd o gychwyn eich system Linux heb ddibynnu\n"
-"ar lwythwr cychwyn arferol. Mae hyn yn ddefnyddiol os ydych am osod SILO ar\n"
-"eich system, neu mae system weithredu arall wedi tynny SILO, neu nad yw "
-"SILO'n\n"
-"gweithio gyda eich ffurfweddiad caledwedd chi. Mae modd defnyddio disg "
-"cychwyn\n"
-" unigol hefyd gyda delwedd achub Mandrake, gan ei gwneud yn llawer haws "
-"adfer o\n"
-" fethiannau systemig sylweddol\n"
-"\n"
-"Os hoffech greu disg cychwyn ar gyfer eich system, rhowch ddisg meddal yn y "
-"gyrrwr\n"
-" cyntaf a chliciwch \"Iawn\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Gyrrwr disg meddal cyntaf"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Ail ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Hepgor"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mae'r disg cychwyn addasu yn cynnig ffordd i gychwyn eich system Linux heb\n"
-"ddibynnu ar eich cychwynnwr arferol. Mae hyn yn ddefnyddiol os nad ydych am\n"
-"osod LILO (neu grub) ar eich system, neu bod system weithredu arall yn "
-"dileu\n"
-"LILO, neu nad yw LILO'n gweithio gyda'ch ffurfweddiad caledwedd.\n"
-"Mae modd defnyddio disg cychwyn addasu hefyd gyda delwedd achub Mandrake,\n"
-"gan ei gwneud yn lawer haws adfer methiannau system sylweddol. Hoffech chi\n"
-"greu disg cychwyn ar gyfer eich system?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(RHYBUDD! Rydych yn defnyddio XFS ar gyfer eich rhaniad gwraidd,\n"
-"bydd creu disg cychwyn ar ddisg meddal 1.44Mb'n debygol o fethu,\n"
-"oherwydd mae XFS yn gofyn am yrrwr mawr iawn)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Nid oes gyrrwr disg meddal ar gael"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Dewiswch y gyrrwr disg meddal i'w ddefnyddio i greu disg cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Rhowch ddisg meddal yn %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creu disg cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Paratoi llwythwr cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Mae'n ymddangos fod gennychbeiriant OldWorld\n"
-"neu Anhysbys ac ni fydd llwythwr cychwyn yaboot\n"
-"yn gweithio ar eich cyfer\n"
-"Bydd y gosodiad yn parhau ond bydd\n"
-"rhaid defnyddio BootX i gychwyn\n"
-"eich peiriant."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ydych chi eisiau defnyddio aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gwall gosod aboot, \n"
-"ceisiwch orfodi gosodiad hyd yn oed os yw hynny'n dinistrio'r rhaniad cyntaf?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Gosod llwythwr cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Methodd gosod llwythwr cychwyn. Digwyddodd y gwall canlynol:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Efallai bydd angen i chi newid eich dyfais cychwyn Open Firmware\n"
-"i alluogi'r llwythwr cychwyn. Os nad ydych yn gweld anogwr y llwythwr\n"
-"cychwyn wrth ail gychwyn, gwasgwch Command-Option-O-F wrth ail\n"
-"gychwyn a theipiwch: setenv boot-device %s,\\\\:tbxi\n"
-"\n"
-" Yna teipiwch: shut-down\n"
-"Wrth gychwyn eto dylech weld anogwr y llwythwr cychwyn."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Rhowch ddisg meddal  yng ngyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nid yw rhai camau wedi eu cwblhau.\n"
-"\n"
-"Ydych chi wir eisiau gorffen?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Llongyfarchiadau, mae'r gosodiad wedi ei gwblhau.\n"
-"Tynnwch y cyfrwng cychwyn a gwasgu Return i ail gychwyn.\n"
-"\n"
-"\n"
-"Am wybodaeth am gywiriadau sydd ar gael ar gyfer y rhyddhad hwn o Mandrake\n"
-"Linux, cysylltwch a'r atodiad, sydd i'w gael yn:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Mae gwybodaeth ar ffurfweddu eich system ar gael ym mhenawdau ôl osod\n"
-"yr Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Mae modd awtomeiddio'r awto gosod, os hoffech\n"
-"chi, yn yr achos hwnnw bydd yn cymryd drosod y\n"
-"disg caled!!\n"
-"(mae hyn ar gyfer gosod ar flwch arall).\n"
-"\n"
-"Efallai byddai'n well gennych ai osod y gosodiad.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Awtomeiddwyd"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ail chwarae"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Cadw'r dewis becynnau"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Gosodiad %s Mandraks Linux"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> rhwng elfennau  | <Space> yn dewis | <F12> y sgrin nesaf "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ar goll"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper ar goll"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Dewis ffeil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Uwch"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Elfennol"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Arhoswch"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Gwybodaeth"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Estyn y goeden"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Cau'r goeden"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Newid rhwng gwastad a'r grwp wedi ei ddidoli"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dewis gwael, ceisiwch eto\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Eich dewis? (rhagosodedig %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Gwybodaeth i'w gyflawyno:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Eich dewis? (0/1, rhagosodedig %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Botwm '%s'.%s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Ydych chi eisiau clicio ar y botwm hwn?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Eich dewis? (rhagosodedig `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Mae yna lawer i ddewis o (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Dewiswch y rhif cyntaf o'r amrediad 10 rydych am ei olygu,\n"
-"neu wasgwch Enter i barhau.\n"
-"Eich dewis?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=>Hysbysiad, mae label wedi newid:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ail-gyflwyno"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tsiec (QWERTY)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Almaeneg"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaenaidd"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Ffinaidd"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ffrengig"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norwyaidd"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pwylaidd"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rwsiaidd"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Swedaidd"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Bysellfwrdd DG"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Bysellfwrdd UDA"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albaniaidd"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenaidd (hen)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenaidd (teipiadur)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenaidd (ffonetig)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan (lladin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgaidd"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bwlgaraidd (ffonetig)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bwlgaraidd (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilaidd (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusaidd"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Swisaidd (gosodiad Almaenig)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Swisaidd (gosodiad Ffrengig)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tsiec (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Almaenaidd (dim bysellau marw)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danaidd"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (UDA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwyaidd)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedaidd)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonaidd"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgaidd (gosodiad \"Rwsiaidd\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgaidd (gosodiad \"Lladinaidd\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Groegaidd"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hwngaraidd"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croataidd"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelaidd"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelaidd (Ffonetig)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranaidd"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Eislandaidd"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Eidalaidd"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Siapaëaidd 106 bysell"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Bysellfwrdd Coreaidd"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lladin America"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuenaidd AZERTY (hen)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuenaidd AZERTY (newydd)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuenaidd \"rhes rhif\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuenaidd \"ffonetig\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latfiaidd"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonaidd"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Isalmaenaidd"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portiwgalaidd"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanaidd (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanaidd (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rwsiaidd (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slfenaidd"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slofacaidd (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovacaidd (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbaidd (cyrilig)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Bysellfwrdd Thai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Bysellfwrdd Tajig"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Twrcaidd (model traddodiadol \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Twrcaidd (model modern \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Wcranaidd"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Bysellfwrdd UDA (rhyngwladol)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Fietnamëaidd \"rhes rhifol\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Iwgoslafaidd (lladin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Bysell Alt dde"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Y ddwy fysell Shift gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Bysellau Control a Shift gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Bysell CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Bysellau Ctrl ac Alt gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Bysellau Alt a Shift  gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Bysell \"Dewislen\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Bysell \"Windows\" chwith"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Bysell \"Windows\" de"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Gosodiadau cylch %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Tynnu'r cyfrolau rhesymegol yn gyntaf\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Nid oes cefnodgaeth PCIMA yn bodoli bellach ar gyfer cnewyllyn 2.2. "
-"Defnyddiwch cnewyllyn 2.4"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Llygoden - Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Llygoden Olwyn PS Generig"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botwm"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Llygoden 2 Fotwm Generig"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generig"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Olwyn"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "cyfresol"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Llygoden 3 Botwm Generig"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Systemau  Llygoden"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Llygoden Logitech (cyfresol, hen fath C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 fotwm"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botwm"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "dim"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Dim llygoden"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Profwch y llygoden"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "I ysgogi'r llygoden,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "SYMUDWCH YR OLWYN!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Gorffen"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Nesaf ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Cynt"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ydi hyn yn gywir?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Cysylltu â'r We"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Y ffordd mwyaf cyffredin i gysylltu â adsl yw pppoe\n"
-"Mae rhai cysylltiadau'n defnyddio pptp, a rhai dhcp.\n"
-"Os nad ydych yn gwybod pa un, dewiswch pppoe."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "usb Alcatel Speedtouch"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "defnyddiwch dhccp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "defnyddiwch pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "defnyddiwch pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Pa gleient dhcp ydych chi eisiau ei ddefnyddio?\n"
-"dhcpcd yw'r rhagosodedig"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system.\n"
-"Nid wyf yn medru gosod y math yma o gysylltiad."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Dewiswch rhag wyneb  y rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Dewiswch pa addaswr rhwydwaith hoffech ei ddefnyddio i gysylltu â'r Rhyngrwyd"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "heb ganfod cerdyn rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Ffurfweddu'r rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Rhowch eich enw gwesteiwr os ydych yn gwybod\n"
-"beth ydyw Mae rhai gwasanaethwyr angen gwybod\n"
-"yr enw gwesteiwr i weithio. Dylai eich enw gwesteiwr\n"
-"fod yn enw cymhwysol llawn megis \"fymlwch.fynesg.fyco.com\""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Enw gwesteiwr"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Dewin Ffurfweddu'r Rhwydwaith"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem IDSN Allanol"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Cerdyn ISDN mewnol"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Pa fath o gysylltiad IDSN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Pa ffurfweddiad IDSN sy'n well gennych?\n"
-"\n"
-"* Mae'r Hen ffurfweddiad yn defnyddio isdn4net. Mae'n\n"
-"  cynnwys offer pwerus ond mae'n anodd ei ffurfweddi ac nid\n"
-"yw'n safonol. \n"
-"\n"
-" *Mae'r ffurfweddiad Newydd yn haws i'w ddeall, yn fwy safonol\n"
-"  ond mae ganddo llai o offer.\n"
-"\n"
-"Rydym yn argymell y ffurfweddiad ysgafn.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ffurfweddiad newydd (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Hen ffurfweddiad (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Ffurfweddiad ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Dewiswch eich darparwr.\n"
-"Os nad yw ar eich rhestr, dewiswch Heb ei Restri"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocol Ewrop"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocol Ewrop (EDSSI)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocol ar gyfer gweddill y byd"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocol ar gyfer gweddill y byd\n"
-" dim D-Channel (llinell les)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Pa brotocol ydych chi eisiau ei ddefnyddio?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Pa fath o gerdyn sydd gennych?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Dim syniad"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Os oes gennych gerdyn, dylai'r gwerthoedd ar y sgrin nesaf fod yn gywir.\n"
-"\n"
-"Os oes gennych gerdyn PCMCIA, rhaid i chi wybod irq ac io eich cerdyn.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Peidio"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Parhau"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Pa un yw eich cerdyn IDSN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Rwyf wedi canfod cerdyn IDSN, ond nid wyf yn gwybod pa fath. Dewiswch un "
-"cerdyn PCI ar y sgrin nesaf."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heb ganfod cerdyn PCI ISDN. Dewiswch un o'r sgrin nesaf."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich modem wedi cysylltu iddo."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Dewisiadau cyswllt ffôn"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Enw'r cysylltiad"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Rhif ffôn"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Dynodiad Mewngofnodi"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Seiliedig ar sgript"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Seiliedig ar derfynnell"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Enw parth"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Gwasanaethwr DNS Cyntaf (dewisol)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Ail Wasanaethwr DNS (dewisol)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch ddatgysylltu neu ailffurfweddu eich cyswllt"
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch ailffurfweddu eich cysylltiad"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Rydych wedi eich cysylltu â'r rhyngrwyd."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch gysylltu â'r Rhyngrwyd neu ailffurfweddu eich cyswllt"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Nid ydych wedi eich cysylltu â'r rhyngrwyd."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Cysylltu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Dadgysylltu"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Ffurfweddu'r gysylltiad"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Cysylltiad â'r rhyngrwyd a'i ffurfweddiad "
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Rydym am ffurfweddu cysylltiad %s"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Rydym yn awr yn mynd i ffurfweddu cysylltiad %s.\n"
-"\n"
-"\n"
-"Pwyswch Iawn i barhau."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Ffurfweddiad y Rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Am eich bod yn gosod eich rhwydwaith, mae eich rhwydwaith eisoes wedi ei "
-"ffurfweddu\n"
-"Cliciwch Iawn i gadw eich ffurfweddiad, neu ddileu i ail ffurfweddi eich "
-"cysylltiad Rhyngrwyd a Rhwydwaith.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Croeso i Ddewin Ffurfweddu'r Rhwydwaith\n"
-"\n"
-"Rydym ar fin ffurfweddi eich cysylltiad rhyngrwyd/rhwydwaith.\n"
-"Os nad ydych am ddefnyddio awto ganfod, dad-diciwch y blwch dewis.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Dewiswch broffil i'w ffurfweddu"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Defnyddio awto ganfod"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Canfod dyfeisiadau..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Cysylltiad  modem arferol"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "canfyddwyd ar borth %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Cysylltiad ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "canfyddwyd %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Cysylltiad ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "canfyddwyd ar rhyngwyneb %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Cysylltiad cebl"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "canfyddwyd cysylltiad cebl"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "cysylltiad LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "cerdyn ethernet wedi ei ganfod"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Dewiiwch y math o gysylltiad rydych am ei ffurfweddu"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Rydych wedi ffurfweddu nifer o ffyrdd i gysylltu â'r Rhyngrwyd.\n"
-"Dewiswch ba un rydych am ei ddefnyddio.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Cysylltiad â'r Rhyngrwyd"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Ydych chi eisiau agor y cysylltiad wrth gychwyn y cyfrifiadur?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Ffurfweddiad y rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Rhaid ail gychwyn y rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Digwyddodd gwall wrth ail gychwyn y rhwydwaith:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Llongyfarchiadau, mae ffurfweddiad y rhwydwaith a'r Rhyngrwyd wedi gorffen\n"
-"Bydd y ffurfweddiad yn cael ei osod ar eich system\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Wedi i hyn gael ei wneud rydym yn argymell eich bod yn a'i gychwyn "
-"amgylchedd X i osgoi unrhyw anawsterau'n perthyn i enwau gwesteiwr.\n"
-"."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Digwyddod anhawsterau yn ystod y ffurfweddiad.\n"
-"Profwch eich cysylltiad drwy net_monitor neu mcc. Os nad yw eich cysylltiad "
-"yn gweithio, efallai y byddwch eisiau ailgychwyn y ffurfweddiad"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Rhybudd!! Cafodd y ddyfais hon ei ffurfweddu o'r blaen i gysylltu â'r "
-"Rhyngrwyd.\n"
-"Derbyniwch y cynnig i gadw'r ddyfais wedi ei ffurfweddi.\n"
-"Bydd newid y meysydd islaw'n newid y ffurfweddiad."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Rhowch ffurfweddiad IP ar gyfer y peiriant hwn\n"
-"Dylai pob eitem ei roi fel cyfeiriad IP nodiant collnod degymol\n"
-"(e.e.1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ffurfweddu dyfais rhwydwaith %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (gyrrwr %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Cyfeiriad IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP awtomatig"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "dylai cyfeiriad IP fod mewn fformat  1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Rhowch eich enw gwesteiwr.\n"
-"Dylai eich enw gwesteiwr fod yn enw gwesteiwr llawn gymwys.\n"
-"megis \"fymlwch.fynesg.fyngho.com\".\n"
-"Medrwch hefyd gynnig eich cyfeiriad IP os oes gennych un"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Gwasanaethwr DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Mynedfa (e.e. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dyfais mynedfa"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Ffurfweddiad dirprwyon"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Dirprwy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Dirprwy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Dilynnwch cyfernod cerdyn rhwydwaith (defnyddiol ar gyfer gliniadur)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Dylai dirprwyon fod yn gyfanrif!"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Dylai rhif porth fod yn ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Ffurfweddiad rhyngrwyd"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Hoffech chi gysylltu â'r Rhyngrwyd nawr?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Profi eich cysylltiad..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Mae'r system wedi cysylltu â'r Rhyngrwyd."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Am resymau diogelwch, bydd yn cael ei ddatgysylltu."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nid yw'n ymddangos i'ch system gysylltu â'r rhyngrwyd.\n"
-"Ailffurfweddwch eich cysylltiad."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Ffurfweddiad y Cysylltiad"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Llanwch neu diciwch y maes islaw"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ y cerdyn"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Cof Cerdyn (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO'r Cerdyn"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_O y cerdyn"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 y cerdyn"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Eich rhif ffôn personol"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Enw darparwr (eng. darparwr.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Rhif ffôn y darparwr"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 y darparwr (dewisol)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 y darparwr (dewisol)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Dewiswch eich gwlad"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modd deialu"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Cyflymder y cysylltiad"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Oediad yn y cysylltiad (mewn eiliadau)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Mewngofnod Cyfrif (enw defnyddiwr)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Cyfrinair y Cyfrif"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "maethodd y gosodiad"
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Nid yw'r rhainad estynedig yncael ei gynnal ay y platfform hwn"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Mae gennych dwll yn nhabl eich rhaniad ond nid wyf yn medru ei ddefnyddio\n"
-"Yr unig ateb yw i symud eich rhaniadau cynradd fel bo'r twll nesaf at y "
-"rhaniadau estynedig "
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Methodd adfer o ffeil %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ffeil wrth gefn gwallus"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gwall wrth ysgrifennu i ffeil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Mae rhywbeth gwael yn digwydd ar eich disg.\n"
-"Mae prawf i fesur ei gyfanrwydd wedi methu. \n"
-"Nid oes gwerth ysgrifennu i'r ddisg"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "rhaid cael"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "pwysig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "hyfryd iawn"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "hyfryd"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "efallai"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Argraffydd lleol"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Argraffydd pell"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Argraffydd ar wasanaethwr CUPS pell"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Argraffydd ar wasanaethwr lpd pell"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Argraffydd rhwydwaith (TCP/Soced)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Argraffydd ar wasanaethwr SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Argraffydd ar wasanaethwr NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Rhowch URI dyfais argraffydd"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Peipio'r gwaith i orchymyn"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Model anhysbys"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Argraffyddion Lleol"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Argraffyddion Pell"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " ar borth paralel \\/\"%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", argraffydd USB \\/\"%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", dyfais amlbwrpas ar borth paralel \\/\"%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", dyfais amlbwrpas ar USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dyfais amlbwrpas ar HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ",dyfais amlbwrpas"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", argraffu i %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr LPD  \"%s\", argraffydd \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", gwesteiwr TCP/IP  \"%s\", porth %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "ar wasanaethwr Windows  \"%s\", rhannu \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr Novell \"%s\", argraffydd \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", defnyddio gorchymyn %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Argraffydd crai (dim gyrrwr)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(ar %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ar y peiriant hwn)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ar wasanaethwr CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr "(Rhagosodedig)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Dewiswch Gysylltiad Argraffydd"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Sut mae'r argraffydd wedi ei gysylltu?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Nid oes angen ffurfweddu argraffyddion ar wasanaethwyr CUPS pell: byddant yn "
-"cael eu canfod yn awtomatig."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Furfweddiad CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Enwch wasanaethwr CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Gyda gwasanaethwyr CUPS nid oes rhaid i chi ffurfweddu unrhyw argraffydd "
-"yma; mae gwasanaethwyr CUPS yn eich hysbysu'n awtomatig am eu "
-"hargraffyddion. Mae'r holl argraffyddion cyfredol sy'n hysbys i'ch peiriant "
-"yn cael eu rhestri yn adran \"Argraffyddyddion Pell\" prif ffenestr "
-"Printerdrake. Pan nad yw eich gwasanaethwr CUPS yn eich rhwydwaith lleol, "
-"rhaid rhoi i'r gwasanaethwr CUPS gyfeiriad IP ac yn ddewisol rhif y porth i "
-"dderbyn gwybodaeth am yr argraffydd gan y gwasanaethwr, neu gadewch y "
-"meysydd yn wag."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Fel rheol, mae CUPS yn cael ei ffurfweddu'n awtomatig yn ôl amgylchedd eich "
-"rhwydwaith, fel bo modd i chi gael mynediad at yr argraffyddion ar "
-"wasanaethwr CUPS yn eich rhwydwaith lleol. Os nad yw hyn yn gweithio'n iawn, "
-"diffoddwch \"Ffurfweddiad CUPS awtomatig\" a golygwch eich ffeil /etc/cups/"
-"cupsd.conf gyda llaw. Peidiwch anghofio ailgychwyn CUPS eto (gorchymyn: "
-"\"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Dylai cyfeiriad IP edrych fel 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Dylai rhif porth fod yn gyfanrif!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP gwasanaethwr CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porth"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Furfweddiad CUPS Awtomatig"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Canfod dyfeisiadau..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Profwch y pyrth"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Ychwanegu argraffydd newydd"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-" Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Mae'r dewin yn caniatáu i chi osod argraffyddion lleol neu bell i'w "
-"defnyddio o'r peiriant hwn a hefyd gan argraffyddion eraill ar eich "
-"rhwydwaith.\n"
-"\n"
-"Bydd yn gofyn am yr holl wybodaeth angenrheidiol i osod yr argraffydd a bydd "
-"yn rhoi mynediad i'r holl yrwyr argraffyddion sydd ar gael, dewisiadau "
-"gyrwyr a mathau o gysylltiadau argraffyddion."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Argraffydd Lleol"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Croeso i Ddewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod eich argraffydd(ion) sy'n "
-"gysylltiedig â'r cyfrifiadur hwn.\n"
-"Cysylltwch yr argraffydd(ion) i'r cyfrifiadur a'i(u) troi mlaen. Cliciwch "
-"\"Nesaf\" pan rydych yn barod, ac ar \"Diddymu\"pan nad ydych am osod eich "
-"argraffydd(ion) ar hyn o bryd.\n"
-"\n"
-"Sylwch fod rhai cyfrifiaduron yn medru methu yn ystod awto ganfod "
-"argraffydd, diffoddwch \"Awto ganfod argraffyddion\" i osod argraffydd heb "
-"awto ganfod. Defnyddiwch \"Modd Arbenigwr\" printdrake pan fyddwch am osod "
-"argraffydd pell os nad yw printerdrake yn ei restri'n awtomatig."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Awto ganfod argraffyddion"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Llongyfarchiadau, mae eich argraffydd wedi ei osod a'i ffurfweddu!\n"
-"\n"
-"Os ydych am ychwanegu, tynnu neu ailenwi argraffydd, neu os ydych am newid y "
-"gosodiadau dewis rhagosodedig (mewnflwch papur, ansawdd y printiad,...0, "
-"dewiswch \"Argraffydd\" yn adran \"Caledwedd\" Canolfan Rheoli Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Awto ganfod Argraffyddion"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Mae Printerdrake yn medru awto ganfod eich argraffyddion paralel ac USB "
-"lleol, ond sylwch fod awto ganfod yn MEDRU RHEWI EICH SYSTEM AC ARWAIN AT "
-"SYSTEMAU FFEIL LLWGR! Gwnewch hyn AR EICH MENTER EICH HUN!\n"
-"\n"
-"Ydych eisiau i'ch argraffydd gael ei awto ganfod?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Defnyddio awto ganfod"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Gosod argraffydd gyda llaw"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Canfyddwyd %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Argraffydd ar borth paralel \\/\"%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Argraffydd USB \\/\"%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Heb ganfod argraffydd lleol! I osod argraffydd gyda llaw, rhowch enw'r "
-"ddyfais /enw ffeil ar y llinell mewnbwn (Porth Paralel: /dev/lp0, /"
-"dev/,...., cyfatebol i LPT1:, LPT2,..., argraffydd USB 1af: /dev/usb/lp0,  "
-"ail argraffydd USB: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Rhaid cynnig enw dyfais neu ffeil!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Heb ganfood argraffydd lleol!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Dim ond ar ôl cwblhau'r gosodiad mae modd gosod argraffyddion rhwydwaith. "
-"Dewiswch \"Caledwedd\" ac yna \"Argraffydd\" yng Nghanolfan Rheoli Mandrake"
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"I osod argraffyddion rhwydwaith, cliciwch \"Diddymu\", trowch i \"Modd "
-"Arbenigwr\", clicio \"Ychwanegu argraffydd newydd\" eto."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Cafodd yr argraffydd canlynol ei awto ganfod, os nad hwn yw'r un rydych am "
-"ei ffurfweddu, rhowch enw dyfais/enw ffeil ar y llinell mewnbwn."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Dyma restr o'r holl argraffyddion gafodd eu awto ganfod. Dewiswch yr "
-"argraffydd rydych am ei osod neu rhowch enw dyfais/ffeil yn y llinell "
-"mewnbwn."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Cafodd yr argraffydd hwn ei awto ganfod. Bydd ffurfweddi'r argraffydd yn "
-"digwydd yn awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu "
-"byddai'n well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Dyma restr o'r holl argraffyddion gafodd eu awto ganfod. Dewiswch yr "
-"argraffydd rydych am ei osod. Bydd ffurfweddu'r argraffydd yn digwydd yn "
-"awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu byddai'n "
-"well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Dewiswch y porth y mae eich argraffydd wedi cysylltu iddo neurhowch enw "
-"dyfais/ffeil ar y ninell mewnbwn"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Dewiswch y porth mae'r argraffydd wedi cysylltu iddo."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Pyrth paralel: /dev/lp0, /dev/lp1, ..., yn cyfateb i LPT1:, LPT2:, ..., "
-"argraffydd USB cyntaf: /dev/usb/lp0, ail argraffydd USB : /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Rhaid dewis/rhoi argraffydd/dyfais!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ffurfweddiad gyda llaw"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"A yw eich argraffydd yn ddyfais amlbwrpas gan HP  (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 gyda sganiwr)"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Gosod pecynnau HPOJ"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Gwirio a ffurfweddu dyfais HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Gosod pecynnau SANE"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Sganio eich dyfais HP aml bwrpas"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Gwneud porth argraffydd ar gael ar gyfer CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Darllen cronfa ddata argraffydd..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Dewisiadau Argraffydd lpd Pell"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"I ddefnyddio argraffydd lpd pell, rhaid darparu enw gwesteiwr gwasanaethwr "
-"yr argraffydd ac enw'r argraffydd ar y gwasanaethwr hwnnw."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Enw gwesteiwr pell"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Enw'r argraffydd pell"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Mae enw'r gwesteiwr pell ar goll!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Mae enw'r argraffydd pell ar goll!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dewisiadau Argraffydd SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"I argraffu i argraffydd SMB, rhaid darparu enw gwesteiwr SMB (Sylwer! Mi all "
-"fod yn wahanol i'w enw gwesteiwr TCP/IP!) ac o bosibl cyfeiriad IP'r "
-"gwasanaethwr argraffu, yn ogystal â'r enw rhannu ar gyfer yr argraffydd "
-"rydych am gael mynediad iddo ac unrhyw enw defnyddiwr, cyfrinair a "
-"gwybodaeth am grwp gwaith perthynol."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Gwasanaethwr gwesteiwr SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP Gwasanaethwr SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Rhannu enw"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grwp gwaith"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Rhaid rhoi un ai enw'r gwasanaethwr neu IP'r gwasanaethwr!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Mae enw rhannu Samba ar goll!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Dewisiadau Argraffydd NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"I argraffu ar argraffydd NetWare, rhaid i chi rhoi enw gwasanaethwr argraffu "
-"NetWare (Sylwer! gall fod yn wahanol i'w enw gwesteiwr TCP/IP) yn ogystal "
-"â'r rhes waith argraffu am yr argraffydd rydych am gael mynediad iddo ac "
-"unrhyw enw defnyddiwr a chyfrinair perthnasol."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Gwasanaethwr Argraffydd"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Enw Rhes Argraffu"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Mae enw gwasanaethwr NCP ar goll!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Mae enw rhes NCP ar goll"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Dewisiadau Argraffydd TCP/Soced"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"I argraffu i argraffydd TCP neu soced, rhaid i chi ddarparu enw gwesteiwr yr "
-"argraffydd ac yn ddewisol rhif y porth. Ar wasanaethwyr HP JetDirect rhif y "
-"porth, fel rheol, yw 9100, gall amrywio ar wasanaethwyr eraill. Gweler "
-"llawlyfr eich caledwedd"
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Enw'gwesteiwr yr argraffydd"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Mae enw'r gwesteiwr argraffu ar goll!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Dyfais Argraffu"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Medrwch enwi'n benodol URI i gael mynediad i'r argraffydd. Rhaid i'r URI "
-"gyflawni manylyn un ai CUPS neu Foomatic. Sylwer nad yw pob math o URI cyn "
-"cael eu cynnal gan bob sbwlydd ."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Rhaid cynnig URI dilys!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Mae pob argraffydd angen enw (e.e. \"argraffydd\". Nid oes angen llanw "
-"meysydd Disgrifiad a Lleoliad. Lle ar gyfer sylwadau'r defnyddiwr sydd yma."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Enw'r argraffydd"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Disgrifiad"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lleoliad"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Paratoi cronfa ddata argraffydd..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model eich argraffydd"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Mae Printerdrake wedi cymharu'r enw model yn sgil yr awto ganfod gyda'r "
-"modelau sy'n cael eu rhestri yn ei gronfa ddata i gael y cydweddiad gorau. "
-"Gall y dewis fod yn anghywir, yn arbennig os nad yw eich argraffydd yn cael "
-"ei enwi yn y gronfa ddata. Felly, edrychwch i weld â yw'r dewis yn gywir a "
-"chliciwch \"Model cywir\" os yw ac os nad yw, cliciwch \" Dewiswch y model "
-"gyda llaw\" fel bo modd i chi ddewis eich argraffydd gyda llaw ar y sgrin "
-"nesaf.\n"
-"\n"
-"Ar gyfer eich argraffydd mae Printerdrake wedi canfod\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Mae'r model yn gywir"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Dewiswch y model gyda llaw"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Dewis model yr argraffydd"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Pa fath o argraffydd sydd gennych?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Gwiriwch os yw Printerdrake wedi awto ganfod eich argraffydd yn gywir. "
-"Chwiliwch am y model cywir pan fo'r cyrchwr yn sefyll ar y model anghywir "
-"neu ar \"Argraffydd bras\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Nid yw eich argraffydd wedi ei rhestri, dewiswch un cyfatebol (gw. llawlyfr "
-"eich argraffydd) neu un tebyg."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Ffurfweddiad OKI winprinter "
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Rydych yn ffurfweddu winprinter laser OKI. Mae'r argraffydd hwn\n"
-"yn defnyddio protocol cyfathrebu arbennig. Dim ond trwy eu cysylltu â'r "
-"porth paralel cyntaf mae modd cael yr argraffydd hwn i weithio. Pan fo eich "
-"argraffydd wedi ei gysylltu i borth arall neu i flwch gwasanaethwr argraffu, "
-"cysylltwch yr argraffydd i'r porth paralel cyntaf cyn argraffu tudalen "
-"brawf. Os na wnewch chi hynny, ni fydd yr argraffydd yn gweithio. Bydd eich "
-"gosodiad ynghylch ymath o gysylltiad yn cael ei anwybyddu gan y gyrrwr."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Ffurfweddiad inkjet Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
-"argraffyddion lleol, yn unig. Cysylltwch eich argraffydd i borth lleol neu "
-"ffurfweddwch ef i'r peiriant mae'n gysylltiedig ag ef."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"I fedru argraffu gyda eich argraffydd inkjet Lexmark a'r ffurfweddiad hwn, "
-"bydd angen gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark (http://"
-"www.lexmark.com/). Ewch i'w safle yn yr UDA a chliciwch ar y botwm \"Drivers"
-"\". Yna dewiswch eich model ac yna \"Linux\" fel system weithredu. Mae'r "
-"gyrwyr yn dod fel pecynnau RPM neu sgriptiau cragen gyda gosodiad graffigol "
-"rhyngweithiol. Nid oes angen i chi wneud y ffurfweddiad drwy'r wyneb "
-"graffigol. Diddymwch yn syth wedi'r cytundeb trwyddedu. Yna argraffwch "
-"dudalennau'r alinio'r pen argraffu gyda \"lexmarkmaintain\" a newid "
-"gosodiadau aliniad y pen gyda'r rhaglen."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Gosodiadau rhagosodedig yr argraffydd\n"
-"\n"
-"Dylech wneud yn siwr fod maint y dudalen a'r modd math inc/argraffu (os ar "
-"gael) a hefyd bod ffurfweddiad caledwedd argraffyddion laser (cof, uned "
-"ddeublyg, blychau papur ychwanego) wedi eu gosod yn gywir. Sylwer bod fod "
-"argraffiad ansawdd/cydraniad uchel iawn yn medru arafu'r argraffu'n "
-"sylweddol.."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Rhaid i ddewis %s fod yn gyfanrif"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Rhaid i ddewis %s fod yn rhif!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Dewis %s allan o amrediad!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ydych chi am osod argraffydd  (\"%s\")\n"
-"fel yr argraffydd rhagosodedig?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Dewiswch y tudalennau prawf rydych am eu hargraffu\n"
-"Sylwer: gall y dudalen brawf llun camera gymryd cryn dipyn o amser cyn cael "
-"ei argraffu ac ar argraffydd laser heb lawer o gof mae'n bosibl na ddaw o "
-"gwbl. Yn y rhan fwyaf o achosion, mae'r prawf tudalen safonol yn ddigonol."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Dim tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Argraffu"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Tudalen prawf safonnol"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Prawf tudalen arall (Llythyr)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Prawf tudalen arall (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Tudalen prawf llun"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Peidiwch argraffu tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Argraffu tudalen(nau) prawf..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Mae tudalennau prawf wedi eu hanfon i'r argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-"Statws argraffu:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Mae tudalen(nau) prawf wedi eu hanfon at yr argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "A weithiodd hwnnw'n iawn?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Argraffydd bras"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"I argraffu ffeil o'r linell orchymyn (ffenestr derfynnell) mae modd "
-"defnyddio un ai'r gorchymyn \"%s <file>\" neu offeryn argraffu graffigol: "
-"\"xpp <file>\" neu \"kprinter <file>\". Mae'r offeryn graffigol yn caniatáu "
-"chi ddefnyddio'r argraffydd ac i newid gosodiadau dewis yn hawdd.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchmynion hyn ym maes \"Gorchmynion Argraffu\" y "
-"deialogau argraffu mewn nifer o raglenni, ond  yma nid ydynt yn darparu'r "
-"enw ffeil am fod y ffeil i'r argraffydd yn cael ei ddarparu gan y rhaglen.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Mae'r gorchymyn \"%s\" hefyd yn caniatau i newid y gosodiadau dewis ar gyfer "
-"tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r llinell "
-"gorchymyn, e.e \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Er mwyn cael gwybodaeth am y dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol darllenwch un ai'r rhestr isod neu cliciwch ar y botwm \"Rhestr "
-"dewis argraffu\"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Dyma restr o'r dewisiadau argraffu sydd ar gael ar gyfer yr argraffydd "
-"presennol:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch "
-"orchymyn \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchymyn hwn ym maes \"Gorchymyn argraffu\" deialog "
-"nifer o raglenni. Ond peidiwch â rhoi'r enw ffeil yma oherwydd bod y ffeil "
-"i'w argraffu wedi ei ddarparu gan y rhaglen.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"I edrych ar y rhestr o'r dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol cliciwch ar fotwm \"Rhestr dewisiadau argraffu\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch y "
-"gorchymyn \"%s <file>\" or \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Mae modd hefyd i ddefnyddio rhag wyneb graffigol \"xpdq\" i osod dewisiadau "
-"a thrin gwaith argraffu.\n"
-"\n"
-"Os ydych yn defnyddio KDE fel amgylchedd pen bwrdd mae gennych \"botwm "
-"argyfwng\", eicon ar y pen bwrdd, wedi ei labelu \"Atal yr Argraffydd!\", "
-"fydd yn stopio 'r holl waith argraffu'n syth pan fyddwch yn ei glicio. Mae "
-"hyn yn ddefnyddiol pan fydd y papur wedi mynd yn sownd, ag ati.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Mae'r gorchmynion \"%s\" a \"%s\" hefyd yn caniatáu newid y gosodiadau dewis "
-"ar gyfer tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r "
-"llinell gorchymyn, e.e \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Cau"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Argraffu/Sganio ar  \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Argraffu ar argraffydd \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Rhestr ddewis argraffu"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Mae modd i chi sganio gyda \"scanimage\" (\"scanimage -d hp:%s\" i "
-"bennu pa un os oes gennych fwy nag un) o'r llinell orchymyn neu gyda rhag "
-"wynebau graffigol  \"xscanimage\" neu \"xsane\". Os ydych yn defnyddio GIMP, "
-"medrwch sganio hefyd, drwy ddewis y man priodol yn y ddewislen \"Ffeil\"/"
-"\"Cipio\". Galwch hefyd \"man scanimage\" a \"man sane-hp\" ar y linell "
-"orchymyn i dderbyn mwy o wybodaeth.\n"
-"\n"
-"Peidiwch defnyddio \"scannerdrake\" ar gyfer y ddyfais hon."
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Medrwch sganio o'r llinell orchymyn gyda \"ptal-hp %s scan ...\".. "
-"Nid yw sganio drwy gyfrwng rhyng wyneb graffigol na GIMP yn cael ei gynnal "
-"eto ar gyfer eich dyfais. Mae rhagor o wybodaeth i'w gael yn ffeil \"/usr/"
-"share/doc/hpoj-0.8/ptal-hp-scan.html\" ar eich system.  Os oes gennych HP "
-"LaserJet 1100 neu 1200 yna dim ond os oes gennych y dewis sganio wedi ei "
-"osod mae modd sganio.\n"
-"Peidiwch defnyddio \"scannerdrake\"  ar gyfer y ddyfais hon."
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Darllen data argraffydd..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Trosglwyddo ffurfweddiad yr argraffydd"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mae modd i chi gopïo ffurfweddiad yr argraffydd fel wnaethoch o yspwlydd %s "
-"i %s eich yspwlydd cyfredol. Bydd yr holl ddata ffurfweddi (enw argraffydd, "
-"disgrifiad, lleoliad, math o gysylltiad a gosodiadau dewis rhagosodedig) yn "
-"cael eu trosi, ond ni fydd y gwaith argraffu'n cael eu trosi.\n"
-"Ni fydd yr holl waith argraffu'n cael eu trosi, am y rhesymau canlynol:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"Nid yw CUPS yn cefnogi argraffyddion ar wasanaethwyr Novell neu "
-"argraffyddion sy'n anfon data mewn gorchymyn ffurf -rhydd.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"Mae PDQ yn cynnal argraffyddion lleol,  LDP pell, a Socket/TCP, yn unig.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Nid yw LPD na LPRng yn cynnal argraffyddion IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Yn ogystal, nid oes modd trosglwyddo rhesi grewyd gan y rhaglen hon na "
-"\"foomatic-configure\"."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Hefyd nid oes modd trosglwyddo argraffyddion ffurfweddwyd gyda ffeiliau PPD "
-"ddarparwyd gan eu gwneuthurwyr na gyrrwyr CUPS brodorol."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Nodwch yr argraffydd rydych am ei drosglwddo a chliciwch\n"
-"\"Trosglwyddo\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Peidio trosglwyddo argraffydd"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Trosglwyddo"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Mae argraffydd o'r enw \"%s\" yn bodoli eisoes yn %s.\n"
-"Cliciwch \"Trosglwyddo\" i ysgrifennu drosto.\n"
-"Mae modd i chi osod enw newydd arno neu ei hepgor."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Dylai enw'r argraffydd gynnwys llythrennau, rhifau a'r tanlinellu, yn unig"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Mae argraffydd \"%s\" yn bodoli eisoes,\n"
-"ydych chi wir eisiau ailysgrifennu ei ffurfweddiad?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Enw'r argraffydd newydd"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Trosglwyddo %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Rydych wedi trosglwyddo eich argraffydd rhagosodedig blaenorol rhagosodedig "
-"(\"%s\"). A ddylai fod yn argraffydd rhagosodedig y system argraffu newydd %"
-"s ?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Adnewyddu data'r argraffydd..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Ffurfweddiad argraffydd pell"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Cychwyn y rhwydwaith..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Ffurfweddwch y rhwydwaith"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Nid yw swyddogaethau'r rhwydwaith wedi ei ffurfweddu"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Ydych chi am ffurfweddi argraffydd pell. Mae hyn angen mynediad ar "
-"rwydwaith, ond nid yw eich rhwydwaith wedi ei ffurfweddu eto. Os ydych am "
-"fynd ymlaen heb ffurfweddiad rhwydwaith, ni bydd modd i chi ddefnyddio'r "
-"argraffydd rydych yn ei ffurfweddu ar hyn o bryd. Beth ydych am ei wneud?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Mynd yn eich blaen heb ffurfweddu'r rhwydwaith"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nid oes modd cychwyn y ffurfweddiad rhwydwaith wnaed yn ystod y gosodiad. "
-"Gwiriwch p'un ai yw'r rhwydwaith yn darparu mynediad ar ôl cychwyn eich "
-"system a chywiro'r ffurfweddiad gan ddefnyddio Canolfan Rheoli Mandrake, "
-"adran \"Rhwydwaith a'r Rhyngrwyd\"/\"Cysylltiad\", ac yna gosod yr "
-"argraffydd, eto gan ddefnyddio Canolfan Rheoli Mandrake, adran \"Caledwedd\"/"
-"\"Argraffydd\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Nid oedd mynediad i'r rhwydwaith yn rhedeg ac nid oedd modd ei gychwyn. "
-"Gwiriwch eich ffurfweddiad a'ch caledwedd. Yna ceisiwch ail ffurfweddi eich "
-"argraffydd."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Ailgychwyn system argraffu..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "uchel"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoia"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Gosod system argraffu yn lefel diogelwch %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Rydych ar fin gosod system argraffu %s ar system sy'n rhedeg lefel diogelwch "
-"%s. \n"
-"\n"
-"Mae'r system yn rhedeg daemon (proses gefndirol) sy'n aros am waith argraffu "
-"ac yna yn eu trin. Mae'r daemon hefyd yn gyraeddadwy gan beiriannau pell "
-"drwy'r rhwydwaith ac felly'n bwynt ymosod. Felly, dim ond ychydig o "
-"ddaemonau sy'n cael eu cychwyn yn rhagosodedig, ar y lefel diogelwch hwn.\n"
-"\n"
-"Ydych chi wir eisiau ffurfweddu argraffu ar y peiriant hwn?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Cychwyn y system argraffu wrth gychwyn y cyfrifiadur"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Ni fydd system argraffu (%s) yn cychwyn yn awtomatig pan fydd y peiriant yn "
-"cael ei gychwyn.\n"
-"\n"
-"Mae'n bosibl fod y cychwyn awtomatig wedi ei ddiffodd wrth newid i lefel "
-"diogelwch uwch, am fod a system argraffu'n bwynt tebygol ar gyfer "
-"ymosodiadau.\n"
-"\n"
-"Ydych chi am i'r cychwyn awtomatig gael ei droi ymlaen eto?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Gwirio'r meddalwedd sydd wedi ei osod..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Tynnu LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Tynnu LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Dewiswch Sbwlydd Argraffydd"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pa system argraffu(sbwlydd) ydych chi am ei ddefnyddio?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Ffurfweddu argraffydd \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Gosod Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Dewisiadau argraffydd"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Paratoi PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Ffurfweddi'u rhaglenni"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Hoffech chi ffurfweddu argraffu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "System argraffu."
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddu. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth "
-"amdano; neu i wneud argraffydd CUPS pell ar gael ar gyfer Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddi. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth amdano."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Adnewyddu rhestr argraffyddion (dangos pob argraffydd CUPS pell sydd ar gael)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Newidiwch y system argraffu"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modd Arferol"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Ydych chi eisiau ffurfwedu argraffydd arall?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Newid ffurfweddiad yr argraffydd"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Argraffydd %s\n"
-"Beth ydych am ei newid ar yr argraffydd hwn?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Gwna!!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Math o gyswllt argraffydd"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Enw'r argraffydd, disgrifiad, lleoliad"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Gwneuthurwr yr argraffydd, model, gyrrwr"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Gwneuthurwr yr argraffydd, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Gosod yr argraffydd fel y rhagosodedig"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Ychwanegwchyr argraffydd hwn i Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Tynnwch yr argraffydd hwn o Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Argraffu tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Gwybod sut i ddefnyddio'r argraffydd"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Tynnu argraffydd"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Tynnu hen argraffydd \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Argraffydd rhagosodedig"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Mae argraffydd \"%s\" wedi ei osod fel yr argraffydd rhagosodedig."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Ychwanegu argraffydd i Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"Mae argraffydd \"%s\" wedi ei ychwanegu'n llwyddiannus i Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Wedi methu ag ychwanegu argraffydd \"%s\" i Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Tynnu'r argraffydd o Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Cafodd argraffydd \"%s\" ei dynnu'n llwyddiannus o Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Methwyd â thynnu argraffydd \"%s\" o Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ydych chi wir eisiau tynnu argraffydd \"%s\""
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Tynnu argraffydd \"%s\"..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Ffurfweddu dirprwy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu 'r dirprwy.\n"
-"\n"
-"Yma bydd modd i chi osod eich dirprwyon http a ftp gyda\n"
-"neu heb mewngofnod a chyfrinair\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Rhowch y wybodaethar gyfer dirprwyo http\n"
-"Gadewch hwn yn wag os nad ydych eisiau dirprwy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porth"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Dylai'r URL ddechrau gyda \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Dylai'r rhan porth fod yn rhifol"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Llanwxh y gwybodaeth dirprwy ftp\n"
-"Gadewch yn wag os nad ydych eisiau dirprwy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Dylai'r URL ddechrau gyda 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Rhowch mewngofnod a chyfrinair dirprwyol, os oes angen.\n"
-"Gadwech yn wag os nad ydych am gael mewngofnod a chyfrinair"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "mewngofnodi"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "cyfrinair"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "aildeipiwch y gyfrinair"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Nid yw'r cyfrineiriau'n cydweddi. Rhowch gynnig arall arni!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Methu ychwanegu rhaniad to_formatted_RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Methu ysgrifenu ffeil %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "methodd mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "methodd mkraid (efallai bod raidtools ar goll)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Dim digon o raniadau ar gyfer RAID lefel %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Cychwynnwch system sain ALSA (Pensaernïaeth Sain Linux Uwch)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron trefnydd gorchymyn cyfnodol"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Mae apmd yn cael ei ddefnyddio i fonitro statws y batri a \n"
-"mewngofnodi drwy syslog. Mae modd ei ddefnyddio i gau'r \n"
-"peiriant pan mae'r batri'n isel."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Mae'n rhedeg gorchmynion wedi eu trefnu gan y gorchymyn at ar amser wedi \n"
-"ei bennu pan oedd at yn rhedeg, gan rhedeg gorchmynion swp pan fydd \n"
-"cyfartaledd y llwyth yn ddigon isel."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Mae cron yn rhaglen safonnol yn UNIX sy'n rhedeg rhaglenni sydd wedi eu \n"
-"pennu gan y defnyddiwr ar adegau penodol. Mae vixie cron yn ychwanegu \n"
-"nifer o ychwanegiadau i'r UNIX cron sylfaenol, yn cynnwys gwell diogelwch \n"
-"a dewisiadau ffurfweddu mwy pwerus."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Mae GPM yn ychwanegu cefnogaeth ar gyfer llygoden i raglenni testun Linux \n"
-"megis, Midnight Commander. Mae hefyd yn caniatáu gweithrediadau torri a \n"
-"gludo consol llygoden, gan gynnwys cefnogaeth ar gyfer bryslenni yn y "
-"consol. "
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Mae HardDrake yn rhedeg archwiliwr caledwedd, a gall yn ôl \n"
-"eich dewis, ffurfweddu caledwedd newydd neu sydd wedi newid."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Mae Apache yn wasanaethwr y We Fyd Eang. Mae'n cael ei ddefnyddio "
-"iwasanaethu ffeiliau HTML a CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Mae daemon uwchwasanaethwr rhyngrwyd (inetd) yn cychwyn nifer\n"
-"o wasanaethau rhyngrwyd eraill, yn ôl y galw. Mae'n gyfrifol am gychwyn\n"
-"nifer o wasanaethau, gan gynnwys telnet, ftp, rsh a rlogin. Mae analluogi \n"
-"inetd yn analluogi'r holl wasanaethau mae'n gyfrifol amdanynt."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Cychwyn hidlydd pecynnau ar gyfer cnewyllyn cyfres Linux 2.2 \n"
-"i greu mur gwarchod i amddiffyn eich peiriant rhag ymosodiadau \n"
-"o'r rhwydwaith."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Mae'r pecyn hwn yn llwytho'r map bysellfwrdd rydych wedi \n"
-"ei ddewis fel yn /etc/sysconfig/keyboard. Mae modd dewis \n"
-"hwn wrth ddefnyddio'r rhaglen wasanaethu kbdconfig. \n"
-"Dylech adael hwn wedi ei alluogi ar gyfer y rhanfwyaf o beiriannau."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Ailgreu awtomatic pennawd y cnewyllyn yn /boot ar\n"
-"gyfer /usr/include/linux{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Canfod a ffurfweddu awtomatic caledwedd wrth gychwyn y cyfrifiadur."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "Bydd Linuxconf yn trefnu ar adegau i gyflawnu amrywiol"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Mae lpd yn ddaemon argraffu sy'n angenrheidiol i lpr weithio\n"
-"Mae'n wasanaethwr sy'n cyflafareddu gwaith argraffu i\n"
-"argraffydd (ion)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Mae Gwasanaethwr Rhith Linux yn cael ei ddefnyddio i adeiladu \n"
-"gwasanaethwyr cyflym a chyraeddadwy."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"mae'r enwyd (BIND) yn Wasanaethwr Enw Parth (DNS) sy'n cael ei ddefnyddio i "
-"gydrannu enwau gwestai i'r cyfeiriadau IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Yn gosod a dadosod pob System Ffeil y Rhwydwaith (NFS), SMB\n"
-"(Rheolwr Rhwydwaith/Windows), a phwyntiau gosod NCP (NetWare) ."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Cychwyn/Gorffen pob rhyngwyneb rhwydwaith sydd wedi eu \n"
-"ffurfweddu i gychwyn wrth gychwyn y peiriant."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau ar draws "
-"rhwydweithiau TCP/IP.\n"
-"Mae'r gwasanaeth yn darparu  ffwythiannaeth gwasanaethwr NFS, sy;n cael ei "
-"ffurfweddu\n"
-"drwy'r ffeil  /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau \n"
-"ar draws rhwydweithiau TCP/IP. Mae'r gwasanaeth hwn \n"
-"yn darparu'r gallu i gloi ffeiliau NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Cychwyn clo allweddell numlock yn awtomatig yn consol \n"
-"ac XFree wrth gychwyn y peiriant."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Cynnal OKI 4w ac argraffyddion windows cyffelyb."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Mae cynhaliaeth PCMICA fel rheol ar gyfer cynnal pethau fel \n"
-"ethernet a modem mewn gliniadur. Ni fydd yn cychwyn heb ei \n"
-"ffurfweddu i wneud hynny, felly mae'n ddiogel ei gael ar beiriannau \n"
-"sydd ddim ei angen."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mae'r mapiwr porth (portmapper) yn rheoli cysylltiadau RPC, \n"
-"sy'n cael eu defnyddio gan brotocolau fel NFS a NIS. Rhaid i wasanaethwr "
-"porthmap\n"
-"redeg ar beiriannau sy'n gweithredu fel gwasanaethwyr ar gyfer protocolau "
-"sy'n\n"
-"gwneud defnydd o fecanwaith RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Mae Postfix yn Asiant Cludo E-bost (MTA), sef rhaglen sy'nsymud e-bost o un "
-"peiriant i'r llall."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bydd yn cadw ac adfer system pwll entropi ar gyfer cynhyrchu rhif \n"
-"hap o ansawdd uchel."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr "Dynodi dyfeisiadau"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Mae'r daemon llwybrydd yn caniatáu i'r tabl llwybrydd IP awtomatig \n"
-"ddiweddaru drwy gyfrwng y protocol RIP. Tra bo RIP'n cael ei \n"
-"ddefnyddio'n eang ar rhwydweithiau bach, mae angen protocolau \n"
-"llwybrydd mwy cymleth ar gyfer rhwydweithiwu cymleth."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Mae'r protocol rstat yn caniatáu i ddefnyddwyr rhwydwaith \n"
-"i adennill metric perfformaid unrhyw beiriant ar y rhwydwaith."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Mae protocol ruser yn caniatáu i ddefnyddwyr ar rwydwaith i adnabod\n"
-"pwy arall sydd wedi mewngofnodi ar beirianau eraill sy'n ymateb."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Mae'r protocol rwho'n caniatáu i ddefnyddwyr pell gael rhestr o'r \n"
-"holl ddefnyddwyr sydd wedi mewngofnodi ar beiriant sy'n rhedeg \n"
-"daemon rwho (yn debyg i fysedd)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Cychwyn y system sain ar eich peiriant"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog yw'r modd mae llawer o daemonau'n defnyddio i gofnodi \n"
-"negeseuon i ffeiliau cofnod systemau. mae'n syniad da io rhedeg \n"
-"syslog  bob tro."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Llwytho'r gyrrwyr ar gyfer eich dyfeisiau usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Yn cychwyn Gwasanaethwr Ffont  X (mae hyn yn orfodol i XFree i redeg).."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Dewiswch pa wasanaethau ddylai gael eu cychwyn yn awtomatig wrth gychwyn y "
-"cyfrifiadur"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Argraffu"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Rhyngrwyd"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Rhannu Ffeiliau"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Gweinyddu Pell"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Gwasanaethwr Cronfa Ddata"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Gwasanaethau: %d wedi eu cychwyn ar gyfer %d wedi eu cofrestri"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Gwasanaethau"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "rhedeg"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ataliwyd"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Gwasanaethau a daemonau"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Dim gwybodaeth ychwanegol am y gwasanaeth hwn."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Cychwyn"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Cychwyn"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Aros"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Diolch am ddewis Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Croeso i fyd Cod Agored"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Mae llwyddiant MandrakeSoft yn seiliedig ar egwyddor Meddalwedd Rhydd. Mae "
-"eich system weithredu newydd yn ganlyniad gwaith cydweithredol ar ran y "
-"Gymuned Linux byd-eang"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Ymunwch â byd Meddalwedd Rhydd"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Dewch i adnabod y gymuned Cod Agored a dewch yn aelod. Dysgwch, addysgwch a "
-"chynorthwywch eraill drwy ymuno yn y grwpiau trafod niferus sydd i'w cael yn "
-"ein tudalennau gwe \"Cymuned\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Y Rhygnrwyd a Negesu"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn cynnig y feddalwedd orau i gael mynediad i bopeth "
-"sydd gan y Rhyngrwyd i'w gynnig. Syrffiwch y we a gwyliwch animeddiadau gyda "
-"Mozilla a Konqueror, cyfnewidiwch e-bost a threfnu eich gwybodaeth gyda "
-"Evolution a Kmail, a llawr iawn rhagor. "
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Amlgyfrwng a Graffigau"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn caniatáu i chi wthio eich cyfrifiadur aml-gyfrwng "
-"i'r eithaf! Defnyddiwch y feddalwedd ddiweddaraf i chwarae ffeiliau "
-"cerddoriaeth a sain, golygu a threfnu eich delweddau a lluniau, gwylio "
-"teledu a fideo, a llawer iawn mwy"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Datblygiad"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 yw'r platfform datblygu gorau. Darganfyddwch rym grynhowr "
-"gcc GNU yn ogystal ag amgylcheddau datblygiadol Cod Agored gorau oll"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Canolfan Rheoli Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Canolfan Rheoli Mandrake Linux 8.2 yw'r lleoliad canolog ar gyfer llunio a "
-"ffurfio eich system Mandrake"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Rhyngwynebau defnyddwyr"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn darparu 11 amgylchedd penbwrdd graffigol a "
-"rheolwyr ffenestri gwahanol i ddewis ohonynt gan gynnwys Gnome 1.4, KDE "
-"2.2.2., Window Maker 0.8,  a'r gweddill"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Meddalwedd Gwasanethwyr"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Trowch eich peiriant i fod yn wasanaethwr pwerus gydag ychydig gliciau ar "
-"eich llygoden: gwasanaethwyr gwe, e-bost, mur gwarchod, llwybrydd, "
-"gwasanaethwr ffeil ac argraffu..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Gemau"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mae Mandrake Linux 8.2 yn darparu'r gemau Cod Agored gorau - arcêd,  antur, "
-"cardiau, chwaraeon, strategaeth..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Hoffech chi ddysgu Linux yn syml, yn gyflym, ac am ddim? Mae MandrakeSoft yn "
-"darparu hyfforddiant ar Linux, yn ogystal â ffordd i fesur eich cynnydd, yn "
-"MandrakeCampus - ein canolfan hyfforddiant ar-lein"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Mae cefnogaeth werthfawr gan Gymuned Linux, a chan MandrakeSoft i'w gael yn "
-"hwylus. Ac os ydych yn hen law ar Linux, cewch fod yn \"Arbenigwr\" a rhannu "
-"eich gwybodaeth ar ein safle cefnogi"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Ar gyfer eich holl brojectau TG, mae ein hymgynghorwyr ar gael i ddadansoddi "
-"eich anghenion a chynnig atebion unigryw i chi. Medrwch fanteisio ar brofiad "
-"eang MandrakeSoft fel cynhyrchydd Linux i ddarparu ateb TG gwell i'ch busnes."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Mae amrediad eang o ddarpariaeth Linux, yn ogystal â chynigion arbennig ar "
-"gynnyrch a 'difyrrwch', ar gael ar-lein yn ein e-siop"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Am ragor o wybodaeth ar Wasanaethau Profesiynol a chynigion masnachol  "
-"MandrakeSoft, gwelwch y dudalen we ganlynol:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Gosod pecynnau..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Methu darllen eich tabl rhaniadau. Mae'n rhy lwgr i mi :[\n"
-"Af ymlaen i flancio rhaniadau gwael"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Gwall!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Methu canfod ffeil delwedd angenrheidiol '%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Ffurfweddwr Awto-Osod"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Rydych ar fin ffurfweddu disg meddal Gosod Awtomatig. Mae'r nodwedd hwn "
-"braidd yn beryglus a dylid ei ddefnyddio gyda gofal.\n"
-"\n"
-"Gyda'r hodwedd hwn, bydd modd ailchwarau'r gosodiad ar y cyfrifiadur, gan "
-"eich holi'n rhyngweithiol ar gyfer rhai cammau, er mwyn newid eu "
-"gwerthoedd.\n"
-"\n"
-"Ydych chi eisiau parhau?\n"
-"?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "FFurfweddiad Camau Awtomatig"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Dewiswch ar gyfer pob cam a fydd yn ail chwarae fel eich gosodiad, neu a "
-"fydd gyda llaw"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Croeso\n"
-"\n"
-"Mae paramedrau'r awto osod i'w cael yn yr adran ar y chwith"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Llongyfarchiadau!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Mae'r disg meddal wedi ei gynhyrchu'n llwyddiannus. \n"
-"Medrwch ail chwarae eich gosodiad."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Awto Gosod"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Ychwanegu eitem"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Tynnu'r eitem olaf"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      Adroddiad DrakBackup  \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                     Adroddiad Daemon DrakBackup \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                   Manylion Adroddiad DrakBackup \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "cyfanswm y cynnydd"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Ffeiliau system wrth gefn"
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Ffeiliau cadw wrth gefn y Disg Caled"
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Cynnydd Disg Caled wrth Gefn..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Cadw wrth gefn ffeiliau eraill..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"rhestr ffeil yrrwyd gan FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) anhawster cysylltiad FTP: Nid oedd yn bosibl anfon eich ffeiliau wrth "
-"gefn drwy FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Gwall wrth anfon e-bost. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Dewis ffeiliau"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Dewiswch y ffeiliau neu gyfeiriaduron a chliciwch 'Ychwanegu'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Gwiriwch pob dewis sydd angen arnoch.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Mae'r dewisiadau hyn yn medru cadw wrth gefn ac adfer pob ffeil yn eich "
-"cyfeiriadur /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Cadw wrth gefn ffeiliau System. ( cyfeiriadur /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Cadw wrth gefn cynyddol (peidio disodli hen ffeiliau wrth gefn)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Peidio cynnwys ffeiliau hanfodol (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Gyda'e dewis hwn medrwch adfer unrhyw fersiwn\n"
-"o'ch cyfeiriadur /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Gwiriwch pob defnyddiwr rydych am eu cynnwys yn eich cadw wrth gefn."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Peidio cynnwys storfa'r porwr"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Tynnu'r Dewis"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Defnyddwyr"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Defnyddiwch cysylltiad FTP i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Rhowch enw'r gwesteiwr neu'r IP"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Rhowch y cyfeiriadur i osod y cadw\n"
-"wrth gefn ar y gwesteiwr hwn."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Rhowch eich mewngofnod"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Rhowch eich cyfrinair"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Cofiwch y cyfrinair"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Cysylltiad FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Cysylltiad Diogel"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Defnyddiwch yr CD/DVDROM i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Dewiswch eich gofod CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Gwiriwch os ydych yn defnyddio cyfrwng CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Gwiriwch os ydych am ddileu eich CDRW cyn"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Gwiriwch os ydych am gynnwys\n"
-" cychwyn gosod ar eich CD"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Rhowch enw dyfais eich Ysgrifennwr CD\n"
-"ex: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Defnyddiwch dâp i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Rhowch enw dyfais i'w ddefnyddio ar gyfer cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Rhowch y maint mwyaf\n"
-"i'w ganiatáu ar gyfer Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Rhowch y cyfeiriadur i gadw iddo:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Defnyddiwch y cwota ar gyfer ffeiliau wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Rhwydwaith"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Disg Caled / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "bob awr"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "bob dydd"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "bob wythnos"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "bob mis"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Defnyddiwch ddaemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Dewiswch faint o amser\n"
-"fydd rhwng pob cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Dewiswch y cyfrwng ar\n"
-"gyfer cadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Defnyddiwch y Disg Caled gyda'i ddaemon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Defnyddiwch FTP gyda daemon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Gwnewch yn siwr bod daemon cron yn cael ei gynnwys yn eich gwasanaethau"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Anfonwch adroddiad e-bost wedi pob cadw wrth gefn i :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Beth"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Lle"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Pryd"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Dewisiadau Eraill"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Ffurfweddiad Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Dewiswch i le rydych am gadw ffeiliau wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "ar Ddisg Caled"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "ar draws Rhwydwaith"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Dewiswch beth rydych am ei gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "System cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Defnyddwyr Cadw wrth Gwfn"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Dewis defnyddwyr gyda llaw"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Ffynhonell Cadw wrth Gefn:\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau System: \n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau Defnyddiwr:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau Eraill: \n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"Cadw ar Ddisg caled ar lwybr: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Cadw ar FTP ar y gwesteiwr: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t enw defnyddiwr:%s\n"
-"\t\t ar lwybr: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"-Dewisiadau:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tPeidiwch cynnwys Ffeiliau System\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t Bydd Cadw wrth gefn yn defnyddio tar a bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar a gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) i gynnwys :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disg Caled.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rhwydwaith drwy FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rhwydwaith drwy SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Dim ffurfweddiad, cliciwch Dewin neu Uwch.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Rhestr o ddata i'w adfer:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Rhestr o ddata llwgr:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Dad-diciwch hwn neu ei dynnu'r tro nesaf."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Mae'r ffeiliau wrth gefn wedi eu llygru"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "         Mae eich dewis data wedi ei          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Ei adfer yn Llwyddiannus ar %s     "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "           Adfer y Furfweddiad"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Iawn i adfer ffeiliau eraill"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Rhestr defnyddwyr i'w adfer ( dim ond y diweddaraf yn ôl y defnyddwyr, sy'n "
-"bwysig )"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Cadw'r ffeiliau system wrth gefn cyn:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "dewiswch y data i'w adfer"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Defnyddiwch y Ddisg Caled ar gyfer cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Adfer o'r Ddisg Caled."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Rhowch y cyfeiriadur lle mae'r ffeiliau wrth gefn yn cael eu cadw"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Dewis cyfrwng arall i adfer ohono"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Cyfrwng Arall"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Adfer y system"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Adfer Defnyddwyr"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Adfer Arall"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "dewis llwybr arall i adfer ( yn lle / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Gwnewch cadw wrth gefn newydd cyn adfer ( ar gyfer cadw wrth gefn cynyddol "
-"yn unig )"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Tynnu cyfeiriaduron defnyddiwr cyn adfer."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Adfer pob cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Adfer Dewisol"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Cymorth"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Cynt"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gorffen"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Adeiladu Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Adfer"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Nesaf"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Crëwch gadw wrth gefn cyn ei adfer...\n"
-" neu gwiriwch fod eich llwybr i'w gadw'n gywir."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Gwall wrth ddefnyddio sendmail\n"
-"  chafodd eich adroddiad e-bost mo'i anfon\n"
-" Ffurfweddwch eich sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Rhestr Pecynnau i'w Gosod"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Gwall wrth anfon ffeil drwy FTP.\n"
-" Cywirwch eich ffurfweddiad FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Dewiswch y data i'w adfer..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Dewiswch y cyfrwng ar gyfer cadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Dewiswch y data i'w gadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ni chanfyddwyd y ffeil ffurfweddu \n"
-"cliciwch Dewin neu Uwch."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "O dan ddatblygiad...arhoswch."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Ffeiliau System Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Cadw'r ffeiliau eraill wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Cyfanswm Cynydd"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "anfon ffeil drwy FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Anfon ffeiliau..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Rhestr data i'w gynnwys ar CDROM"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Rhowch gyflymder yr ysgrifennydd CD"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Rhowch enw dyfais eich Ysgrifennydd CD (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ticiwch os ydych eisiau cynnwys cychwyn gosod ar eich CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Cadwch wrth Gefn eich ffeiliau ffurfweddu"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Edrych ar Ffurfweddiad Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Ffurfweddiad y Dewin"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Ffurfweddiad Uwch"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Cadw wrth Gefn Nawr"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"Yma mae Drakbackup yn caniatáu i chi newid:\n"
-"\n"
-" - Y modd cywasgu:\n"
-"   \n"
-"     Os wnewch chi glicio cywasgiad bzip2, byddwch yn \n"
-"     cywasgu eich data'n well na gzip (tua 2-10%).\n"
-"     Nid yw'r dewis wedi ei nodi drwy ragosodiad gan fod\n"
-"     angen mwy o amser ar y modd cywasgu hwn (tua 1000% yn fwy).\n"
-"\n"
-"- Y modd diweddaru:\n"
-"\n"
-"      Bydd y dewis hwn yn diweddaru eich caw wrth gefn, ond\n"
-"      nid yw'r dewis hwn wir yn ddefnyddiol gan fo angen dadgywasgu\n"
-"      eich cadw wrth gefn cyn bo modd i chi ei ddiweddaru.\n"
-"      \n"
-"- Y modd .backupignore\n"
-"     Fel gyda cvs, bydd Drakbackup yn anwybyddu pob cyfeiriad\n"
-"     yn ffeiliau .backupignore ym mhob cyfeiriadur.\n"
-"     ar wahân i: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr "\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"- Ffeiliau system Cadw wrth Gefn\n"
-"         \n"
-"\tMae'r dewis hwn yn caniatáu i chi gadw wrth gefn eich\n"
-"\tcyfeiriadur /etc, sy'n cynnwys eich ffeiliau ffurfweddiad.\n"
-"\tByddwch ofalus wrth ei adfer i beidio trosysgrifo:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-"- Ffeiliau Defnyddiwr Cadw wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniatáu i chi ddewis pob defnyddiwr\n"
-"\trydych am gadw wrth gefn ar eu cyfer.\n"
-"\tI ddiogelu lle ar ddisg, argymhellir nad ydych yn cadw storfa'r\n"
-"\t porwr.\n"
-" \n"
-"- Cadw Ffeiliau Eraill wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniatáu i chi ychwanegu mwy\n"
-"\to ddata i'w gadw. Gyda'r cadw arall wrth gefn nid\n"
-"\tyw'n bosibl ar hyn o bryd i ddewis cadw wrth gefn\n"
-"\tcynyddol.\t\t\n"
-"\n"
-"Cadw wrth Gefn Cynyddol:\n"
-"\n"
-"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
-"\tMae'r dewis hwn yn caniatáu i chi gadw eich data wrth\n"
-"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
-"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
-"\tdata o ddyddiad penodol.\n"
-"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
-"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"disgrifad o adfer:\n"
-"\n"
-"Dim ond y ffeiliau mwyaf diweddar fydd yn cael eu defnyddio,\n"
-"oherwydd gyda candw wrth gefn cynyddol mae angen adfer\n"
-"pob cadw hyn yn unigol.\n"
-"\n"
-"Felly os nad ydych am adfer defnyddiwr dad-ddewiswch ei ddewisiadau.\n"
-"\n"
-"Ar wahan i hynny, dim ond un o rhain mae modd ei ddewis\n"
-"\n"
-"Cadw wrth Gefn Cynyddol:\n"
-"\n"
-"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
-"\tMae'r dewis hwn yn caniatáu i chi gadw eich data wrth\n"
-"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
-"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
-"\tdata o ddyddiad penodol.\n"
-"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
-"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn.    \n"
-"\\n\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Hawlfraint(H 2001 MandrakeSoft gan DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn ôl eich dewis) unrhyw fersiwn diweddarach.\n"
-"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
-"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software  Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA"
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Disgrifiad:\n"
-"\n"
-" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
-" eich ffeiliau system wrth gefn.\n"
-" Yn ystod y ffurfweddiad medrwch ddewis:\n"
-"\t- Ffeiliau system,\n"
-"\t-Ffeiliau defnyddwyr,\n"
-"\t-Ffeiliau eraill.\n"
-"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
-"\n"
-"  Mae Drackbackup yn caniatáu i chi ddefnyddio:\n"
-"\t- Disg Caled.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
-"\t- FTP.\n"
-"\t- Webdav.\n"
-"\t- Tâp.\n"
-"\n"
-"  Mae Drakbackup yn caniatáu i chi adfer eich system i\n"
-"  gyfeiriadur o ddewis y defnyddiwr.\n"
-"\n"
-"  Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Ffeil ffurfweddiad:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Camau wrth adfer:\n"
-"  \n"
-"  Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
-"  eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
-"  ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
-"  gadw wrth gefn cyn adfer.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"Byddwch ofalus wrth ddefnyddio cadw wrth gefn ftp, oherwydd\n"
-"dim ond ffeiliau wrth gefn sydd wedi eu hadeiladu sy'n cael eu\n"
-"hanfon at y gwasanaethwr.\n"
-"Felly, rhaid i chi adeiladu eich cadw wrth gefn ar eich disg caled\n"
-"cyn ei anfon i'r gwasanaethwr.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Anawsterau Adfer Ffeiliau wrth gefn\n"
-"\n"
-"Yn ystod yr adfer bydd Drakbackup yn gwirio eich holl\n"
-"ffeiliau wrth gefn cyn eu hadfer.\n"
-"Cyn adfer, bydd Drakbackup yn tynnu'r cyfeiriadur\n"
-"gwreiddiol, a byddwch yn colli eich holl ddata. Mae'n\n"
-"bwysig eich bod yn ofalus a pheidio newid y ffeiliau\n"
-"data wrth gefn gyda llaw.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Disgrifiad:\n"
-"\n"
-" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
-" eich ffeiliau system wrth gefn.\n"
-" Yn ystod y ffurfweddiad medrwch ddewis:\n"
-"\t- Ffeiliau system,\n"
-"\t- Ffeiliau defnyddwyr,\n"
-"\t- Ffeiliau eraill.\n"
-"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
-"\n"
-"  Mae Drackbackup yn caniatáu i chi ddefnyddio:\n"
-"\t- Disg Caled.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tâp.\n"
-"\n"
-"  Mae Drakbackup yn caniatáu i chi adfer eich system i\n"
-"  gyfeiriadur o ddewis y defnyddiwr.\n"
-"\n"
-"  Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Ffeil ffurfweddiad:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Camau wrth Adfer:\n"
-"  \n"
-"  Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
-"  eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
-"  ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
-"  gadw wrth gefn cyn adfer.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Mae gosod %s wedi methu. Digwyddodd y gwall canlynol:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Chwilio am ffontiau wedi eu gosod"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Tynnu ffontiau wedi eu gosod"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "pob ffont"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "heb ganfod ffontiau"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "gorffen"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "methu canfod unrhyw ffont yn eich rhaniad gosodedig"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ailddewis y ffontiau cywir"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "methu cnafod unrhyw ffontiau.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Chwilio am ffontiau yn y rhestr gosod"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copïo ffontiau"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Gosod ffontiau True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "arhoswch yn ystod ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Wedi gosod True Type"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Trosiad ffontiau"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "adeiladu math 1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "cyfeirio Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "trosi ffontiau ttf "
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "trosi ffontiau pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Llethu ffeiliau dros dro"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Ail gychwyn XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Llethu ffeiliau Ffontiau"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "ail gychwyn xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Cyn gosod unrhyw ffontiau, gwnewch yn siwr bod gennych yr hawl i'w defnyddio "
-"a'u gosod ar eich system.\n"
-"\n"
-"- Medrwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
-"ffontiau ffug rewi eich Gwasanaethwr X"
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Mewnforio Ffontiau"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Estyn Ffontiau Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Dad osod Ffontiau"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Dewisiadau Uwch"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Rhestr Ffontiau"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Dewiswch y rhaglenni fydd yn cynnal ffontiau:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Argraffyddion Generig"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Dewiswch ffeil neu gyfeiriadur y ffont a chlicio 'Ychwanegu'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Gosod Rhestr"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "cliciwch yma os ydych yn siwr."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "yma os nad."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Dad ddewis Popeth"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Dewis Popeth"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Rhestr Tynnu"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Prawf Init"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copïo'r ffontiau ar eich system!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Gosod a throsi ffontiau"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Wedi'r Gosod"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Tynnu ffontiau oddi ar eich system!"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Wedi'r dad osod"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Rhannu Cysylltiad â'r Rhyngrwyd"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Mae Rhannu Cysylltiad â'r Rhyngrwyd wedi ei alluogi"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei alluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "dymunol"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "gwrthod"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ailffurfweddu"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Analluogi gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Mae rhannu cysylltiad â'r Rhyngrwyd wedi ei analluogi."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Mae Rhannu Cysylltiad a'r Rhyngrwyd wedi ei analluogi"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei analluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "galluogi"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Galluogi gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Mae rhannu cysylltiad â'r Rhyngrwyd wedi ei alluogi."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i rannu ei cysylltiad Rhyngrwyd\n"
-"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"medru rhannu cyswllt rhyngrwyd y\n"
-"cyfrifiadur hwn.\n"
-"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rhyngwyneb %s (gan ddefnyddio modiwl %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Rhagwyneb %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nid oes addasydd rhwydwaith ar eich system!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system. Rhedwch "
-"yr offeryn ffurfweddu caledwedd."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Rhyngwyneb rhwydwaith"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Dim ond un addasydd rhwydwaith wedi ei ffurfweddu sydd ar eich system\n"
-"\n"
-"%s\n"
-"\n"
-"Rwyf ar fin gosod eich Rhwydwaith Lleol gyda'r addasydd hwnnw.."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Dewiswch ba addasyddion rhwydwaith fydd yn cael eu cysylltu â'ch Rhwydwaith "
-"Lleol."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Mae rhag wyneb y rhwydwaith wedi ei ffurfwedu eisoes"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Rhybudd, mae'r addaswr rhwydwaith (%s) wedi ei ffurfweddu eisoes.\n"
-"\n"
-"Ydych chi eisiau ail ffurfweddiad awtomatig?\n"
-"\n"
-"Medrwch ei wneud gyda llaw ond mae'n rhaid i chi wybod beth ydych yn ei "
-"wneud."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Ail ffurfweddiad awtomatig"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Dangoswch y ffurfweddiad rhag wyneb cyfredol"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Ffurfweddiad presennol '%s':\n"
-"\n"
-"Rhwydwaith: %s\n"
-"Cyfeiriad IP: %s\n"
-"Priodweddau IP: %s\n"
-"Gyrrwr: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Medraf gadw eich ffurfweddiad cyfredol a chymryd eich bod eisoes wedi gosod "
-"gwasanaethwr DHCP. Os felly, dilyswch fy mod wedi darllen y rhwydwaith "
-"dosbarth C rydych yn ei ddefnyddio fel eich rhwydwaith lleol, yn gywir. Ni "
-"fyddaf yn ei newid na chyffwrdd â ffurfweddiad eich gwasanaethwr DHCP.\n"
-"\n"
-"Neu, medraf ail ffurfweddu eich rhag wyneb ac (ail)ffurfweddi gwasanaethwr "
-"DHCP ar eich cyfer.\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Rhwydwaith Lleol Dosbarth C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Gwasanaethwr DHCP IP (Hwn)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Ail ffurfweddi rhag wyneb a gwasanaethwr DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Nid yw'r Rhwydwaith Leol yn terfynnu gyda '.0', tynnu allan."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Canfuwyd gwrthdaro posib yng nghyfeiriad LAN ffurfweddiad presennol %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Rhybudd! Mae ffurfweddiad mur gwarchod wedi ei ganfod. Efallai bydd angen "
-"atgyweirio gyda llaw ar ôl y gosodiad."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Ffurfweddu..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ffurfweddio sgriptiau, gosod meddalwedd, cychwyn gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Anhawster wrth osod pecyn %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Mae popeth wedi ei ffurfweddu\n"
-"Gallwch rannu cysylltiad â'r Rhyngrwyd gyda chyfrifiaduron eraill ar eich "
-"Rhwydwaith Lleol gan ddefnyddio ffurfweddiad rhwydwaith awtomatig (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei anallluogi ar hyn o bryd."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei allluogi ar hyn o bryd."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nid oes Rhannu Cysylltiad â'r Rhyngrwyd wedi eu ffurfweddu o'r blaen."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Ffurfweddiad rhannu cysylltiad â'r Rhyngrwyd"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Croeso i'r Gwasanaeth Rhannu Cysylltiad â'r Rhyngrwyd\n"
-"\n"
-"%s\n"
-"\n"
-"Cliciwch Ffurfweddu i gychwyn y dewin gosod."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ffurfweddiad y rhwydwaith (%d addasydd)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Proffil:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Proffl dileu"
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Proffil i'w ddileu:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Proffil newydd..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Enw'r proffil i'w greu ( mae'r proffil newydd yn cael ei greu fel copi o'r "
-"un cyfredol):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Enw gwesteiwr:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Mynediad i'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Math: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Mynedfa:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Rhyngwyneb:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Statws"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Arhoswch"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Ffurfweddu Mynediad i'r We..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Ffurfweddiad y Rhwydwaith Lleol"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Gyrrwr"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Rhyngwyneb"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Stad"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Ffurfweddu'r Rhwydwaith Lleol..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Cliciwch yma i gychwyn y dewin ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Dewin..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Gosod"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Arhoswch...Gosod y ffurfweddiad"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Wedi cysylltu"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Heb gysylltu"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Cysylltu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Dadgysylltu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych unrhyw rhagwynebau wedi\n"
-"eu ffurfweddio. Ffurfweddwch nhw'n gyntaf\n"
-"drwy glicio ar 'Ffurfweddu'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Ffurfweddiad Rhwydwaith Lleol (LAN)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Addasydd %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocol Cychwyn"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Cychwyn y peiriant"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cleient DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "cychwyn nawr"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "dad weithredu nawr"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Nid yw'r rhag wyneb hwn wedi ei ffurfweddu eto.\n"
-"Cychwynnwch y dewin ffurfweddi yn y brif ffenestr."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych cysylltiad â'r rhyngrwyd.\n"
-"Crëwch un drwy glicio ar 'Ffurfweddu'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Ffurfweddiad cysylltiad â'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Ffurfweddu Cysylltiad â'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Math o gyswllt:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Paramedrau"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Mynedfa"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Cerdyn Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cleient DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Gosod y lefel diogelwch"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Canolfan Rheoli"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Dewiswch yr offeryn rydych am ei ddefnyddio"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cabl)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "UDA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "UDA (cabl)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "UDA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Tseina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Siapan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Siapan (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Dwyrain Ewrop"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Iwerddon"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Gorllewin Ewrop"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Awstralia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Zeland Newydd"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "De Affrica"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Yr Ariannin"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Rhowch eich safon teledu a gwlad"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Safon Teledu:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Ardal:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Wrthi'n sganio am sianeli Teledu ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Sganio am Sianel Teledu"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "defnydd: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Dewiswch gynllun alweddell"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ydych chi eisiau i'r Backspace ddychwelyd Dileu yny consol?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Newid CD-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Rhowch y CD Gosod yn eich gyrwr a chlicio Iawn ar ôl gorffen\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi diweddaru."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Methu cychwyn diweddariad byw!!! \n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Mae'r newid wedi ei gyflawni, ond i fod yn effeithiol mae'n rhaid i chi "
-"allgofnodi"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Dangos ar y diwrnod penodol yn unig"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ffeil/_Newydd"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ffeil/_Agor"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/_Cawd"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Cawd _fel"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Ffeil/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Dewisiadau"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Dewisiadau/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Cymorth"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Cymorth/_Ynghylch..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Defnyddiwr"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Negeseuon"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Esboniadau Offer Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "chwilio"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Offeryn i fonitro eich cofnodion"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Gosodiadau"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "cydweddu"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "ond heb fod yn cydweddu"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Dewis ffeil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendr"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Cynnwys y ffeil"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Rhybudd E-bost/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "arhoswch, dosbarthu ffeil: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Rhybudd ffurfweddiad E-bost/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu e-bost/SMS\n"
-"\n"
-"Yma bydd modd i chi osod y system rhybuddio.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "gosodiad gwasanaeth"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Byddwch yn derbyn rhybudd os na fydd un o'r gwasanaethu hyn yn rhedeg"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "gosodiad llwyth"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Byddwch yn derbyn rhybudd os yw'r llwyth yn uwch na'r gwerth hwn"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "ffurfweddiad rhybudd"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Ffurfweddiwch y ffordd mae'r system yn eich rhybuddio"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Cadw fel..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Dewiswch math eich llygoden"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "neb ganfod serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Efelychu'r trydydd botwm?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "Wedi canfod %s ar %s, ei ffurfweddi?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Dewiswch sganiwr"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Nid yw sganiwr %s yn cael ei gynnal"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dyfais cychwyn"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Rhaid i sganiwr %s gael ei ffurfweddu gan printerdrake.\n"
-"Medrwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli Mandrake"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Ffurfweddiad Mur Gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Ffurfweddiad Mur Gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Mur Gwarchod\n"
-"\n"
-"Rydych eisoes wedi gosod mur gwarchod\n"
-"Cliciwch Ffurfweddu i newid neu dynnu'r mur gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Mur gwarchod\n"
-"\n"
-"Cliciwch Ffurfweddu i osod mur gwarchod safonnol"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Dewis eich iaith"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Dewis dosbarth gosod"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Canfod disg caled"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Ffurfweddu llygoden"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Dewis eich allweddell"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Diogelwch"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "System ffeil gosod"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Fformatio rhaniadau"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Dewis pecynnau i'w gosod"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "System osod"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ychwanegu defnyddiwr"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ffurfweddu rhwydwaith"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Ffurfweddu gwasanaethau"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Gosod llwythwr cychwyn"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Creu disg cychwyn"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Ffurfweddu X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Diweddariadau system gosod"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Gadael gosod"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ffurfweddiadur tinyfirewall\n"
-"\n"
-"Mae hwn yn ffurfweddu mur gwarchod personol ar gyfer y peiriant \n"
-"Mandrake Linux hwn. Am fur gwarchod pwrpasol pwerus, \n"
-"edrychwch ddosbarthiad arbennigol MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Byddwn nawr yn gofyn cwestiynnau am wasanaethau'r hoffech eu \n"
-"caniatáu i'r Rhyngrwyd gysylltu â hwy. Meddyliwch yn ofalus am y \n"
-"cwestiynnau, mae diogelwch eich cyfrifiadur yn bwysig.\n"
-"\n"
-"Os nad ydych yn defnyddio un o'r gwasanaethau hyn \n"
-"gwarchodwch ef. Mae modd newid y ffurfweddiad pryd \n"
-"bynnag hoffech chi drwy ail redeg y rhaglen."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr gwe ar y peiriant hwn i'r holl\n"
-"Ryngrwyd ei weld? Os ydych yn rhedeg gwasanaethwr gwe\n"
-"sydd ar gyfer y peiriant hwn yn unig, yna atebwch NA.\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr enw ar y peiriant hwn? Os nad ydych wedi\n"
-"gosod un i rhannu gwybodaeth IP a parth i'r holl Ryngrwyd, yna atebwch NA.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Ydych chi am ganiatáu cysylltiadau Secure Shell (ssh)? Mewngofnod\n"
-"posib i gymryd lle telnet yw hwn. Os ydych yn defnyddio telnet, dylech wir \n"
-"newid i ssh. Nid yw telnet wedi ei amgryptio - gall rhai ymosodwyr ddwyn\n"
-"eich cyfrinair. Mae ssh wedi ei amgryptio ac nid yw'n caniatáu i eraill "
-"wrando."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"A ydych am ganiatáu cysylltiadau telnet i mewn?\n"
-"Mae hyn yn erchyll o aniogel, fel soniwyd yn y sgrin diwethaf. Rydym\n"
-" yn argymell yn gryf eich bod yn ateb Na yn fan hyn a defnyddio ssh\n"
-"yn lle telnet\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr FTP sydd angen cysylltiad â'r Rhyngrwyd?\n"
-"Os ydych rydym yn argymell yn gryf eich bod yn ei ddefnyddio ar gyfer\n"
-"trosglwyddiadau anhysbys yn unig. Gall unrhyw gyfrinair sy'n cael ei anfon\n"
-"drwy FTP gael ei ddwyn, gan nad yw FTP'n defnyddio amgryptiad ar gyfer\n"
-"trosglwyddo cyfrineiriau\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr e-bost? Os ydych yn\n"
-"anfon eich negeseuon drwy pine, mutt neu unrhyw gleient testun arall\n"
-"yna mae'n debyg eich bod. Oni bai am hynny, dylech ddiogelu hwn gyda\n"
-"mur gwarchod\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr POP neu IMAP? Byddai\n"
-"hyn yn cael ei ddefnyddio fel gwestai ar gyfer cyfrifon e-bost\n"
-"nad ydynt yn gysylltiedig a'r we, drwy'r peiriant hwn\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Mae'n ymddangos eich bod yn rhedeg cnewyllyn 2.2 Os\n"
-"yw eich rhwydwaith wedi ei greu'n awtomatig gan gyfrifiadur\n"
-"yn eich cartref neu swyddfa (neilltuad dynamigol) rhaid caniatáu\n"
-"ar gyfer hyn. Ai dyma sut mae hi?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Ydi eich cyfrifiadur yn cydweddi amser gyda cyfrifiadur arall?\n"
-"Fel rheol, mae hyn yn cael ei ddefnyddio gan gyrff Unix/Linux\n"
-"cymhedrol-mawr i gydweddu amser ar gyfer mewngofnodi ag ati.\n"
-"Os nad ydych yn rhan o swyddfa fwy ac heb glywed am hyn, mwy\n"
-"na thebych, nid ydych."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Mae furfweddiad wedi ei gwblhau. Gawn ni ysgrifennu'r newidiadau hyn i  "
-"ddisg?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Methu agor %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Methu agor %s ar gyfer ysgrifennu: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nid wyf angen DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Rwyf eisiau DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nid wyf angen NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Rwyf eisiau NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Peidio Cadw"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Cadw a Gadael"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Dewin Ffurfweddu'r Mur Cadarn"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Na ((rhowch hwn tu nôl i fur cadarn rhag y rhyngrwyd)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Iawn (caniatewch hwn drwy'r mur cadarn)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Arhoswch,... Gwirio'r pecynnau sydd wedi eu gosod"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Wedi methu gosod y pecynnau angenrheidiol: %s a Bastille.\n"
-" Ceisiwch eu gosod gyda llaw."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Gwe/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Cyfrifiadur Rhwydwaith (cleient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-"Gwasanaethwr NFS, gwasanaethwr SMB, gwasanaethwr dirprwyol, gwasanaethwr ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Swyddfa"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Man Gwaith Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Offer ar gyfer eich Palm PiloT neu eich Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Man Gwaith"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Mur Gwarchod/Llwybrydd"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Enw Parth a gwasanaethwr Gwybodaeth Rhwydwaith"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Rhaglenni swyddfa: prosesydd geiriau (Kword, abiword, taenlenni (kspread, "
-"gnumeric), darllennydd pdf, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Offer Sain: mp3 neu chwarewyr midi, cymysgwyr, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llyfrau a Howto's ar Linux a Meddalwedd Rhydd"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Man Gwaith KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Aml-gyfrwng - Fideo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Casgliad o offer ar gyfer e-bost, newyddion, y we, trosglwyddo ffeiliau, a "
-"sgwrsio"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Cronfa Ddata"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Gwasanaethwr cronfa data PostgreSQL neu MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Offer i wneud ffurfweddu'ch cyfrifiadur yn haws"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Aml-gyfrwng - Sain"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Gwaasanaethau"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dogfennaeth"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Offer y Consol"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Gwasanaethwr e-bost Postfix, gwasanaethwr newyddion Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Man Rhyngrwyd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Man Aml-gyfrwng"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Ffurfweddiad"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Rhagor o Ben Bwrdd Graffig (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE - Amgylchedd Penbwrdd K, yr amgylchedd graffig sylfaenol gyda chasgliad "
-"o offer"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Amgylchedd Graffig"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Offer i greu a llosgi CDau"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Gweithfan Swyddfa"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Gwasanaethwr"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Rhaglenni graffeg megis The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Llyfrgelloedd datblygiadol C a C++, rhaglenni a ffeiliau cynnwys"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Gwasanaethwr Cyfrifiadur Rhwydwaith"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-bost/Offer Grwp/Newyddion"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Man chwarae"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Chwarewyr a golygyddion fideo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Aml-gyfrwng - Graffig"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Rhaglenni difyrrwch: arcêd, byrddau, strategaeth, ag ati"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Casgliad o offer i ddarllen ac anfon e-bost a newyddion (pine, mutt, tin..) "
-"ac i bori'r We"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archifio, efelychwyr, monitro"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Cyllid Personol"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Amgylchedd graffig gyda chasgliad o raglenni ac offer penbwrdd hawdd eu "
-"defnyddio."
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientiaid ar gyfer protocolau amrywiol yn cynnwys ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Porth i'r rhyngrwyd"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Chwarae sain a fideo/rhaglenni golygu"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Pen Desg Graffigol Eraill"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Golygyddion, cregyn, offer ffeilio, terfynellau"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Rhaglenni i reoli eich cyllid, megis gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Rheoli Gwybodaeth Bersonol"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Aml-gyfrwng - Llosgi CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Gweithfan Gwyddonol"
-
-#~ msgid "About"
-#~ msgstr "Allwedd amgryptio (eto)"
-
-#~ msgid "             Help           "
-#~ msgstr "             Cymorth"
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "Nid yw XawTV wedi ei osod ...\n"
-#~ "Dylech ei osod.\n"
-#~ " Teipiwch \"urpmi xawtv\""
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
deleted file mode 100644
index 6edcd2ac1..000000000
--- a/perl-install/share/po/da.po
+++ /dev/null
@@ -1,12282 +0,0 @@
-# Danish translation of/Dansk oversættelse af
-# Mandrake Linux DrakX.
-# Copyright (C) 1999-2001 MandrakeSoft
-#
-# In order of activity:
-# 1, Keld Simonsen <keld@dkuug.dk>, 2000-2002
-# 2, Jacob Nordfalk <nordfalk@mobilixnet.dk>, 2001-2002
-# 3, Troels Liebe Bentsen <tlb@iname.com>, 1999-2000
-# 4, Nikolaj Berg Amondsen <mr_nba@get2net.dk>, 2000
-# 5, Jacob Sparre Andersen, <sparre@sslug.dk>, 2000
-# 6, Kenneth Christiansen, <kenneth@ripen.dk>, 2000
-# 7, Jens Burkal <jburkal@get2net.dk>, 1999
-# 8, Mads Stenhuus Hansen <msh@com.dtu.dk>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 13:04+0100\n"
-"Last-Translator: Keld Simonsen <keld@dkuug.dk>\n"
-"Language-Team: Danish <dansk@klid.dk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigurér alle skærme uafhængigt"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Brug Xinerama-udvidelse"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurér kun kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Flerskærms-konfiguration"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Dit system understøtter konfiguration af flere skærme\n"
-"Hvad vil du gøre?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikkort"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Vælg et grafikkort"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Vælg en X-server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Vælg en X-driver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-driver"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfiguration af XFree ønsker du?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
-"Dit kort er understøttet af XFree %s som kan have bedre understøttelse i 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Dit kort kan have 3D hardware accelerations-understøttelse med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med 3D hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dit kort kan have 3D acceleration understøttelse, men kun med XFree %s,\n"
-"VIGTIGT: Dette er eksperimentelt og kan få din maskine til at låse eller gå "
-"ned."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration understøttelse, men kun med XFree %s.\n"
-"VIGTIGT: Dette er eksperimentelt og kan få din maskine til at låse eller gå "
-"ned.\n"
-"Dit kort er understøttet af XFree %s som kan have bedre understøttelse i 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installations-skærmdriver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfiguration"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Vælg hukommelsesmængde for dit grafikkort"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Vælg server-indstillinger"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Vælg en skærmtype"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Skærm"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange "
-"gange (per sekund) hele skærmbilledet bliver genopfrisket, og (vigtigst af "
-"alt) den vandrette frekvens, som angiver antallet af vandrette linier der "
-"kan tegnes på skærmen hvert sekund.\n"
-"\n"
-"Det er MEGET VIGTIGT at du ikke angiver en skærmtype med "
-"opdateringsfrekvenser, der er større end din skærms formåen: du risikerer at "
-"ødelægge din skærm.\n"
-"Hvis du er i tvivl, bør du vælge en opsætning, som du med SIKKERHED ved\n"
-"at din skærm kan klare."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Vandret opdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Lodret opdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Skærm ikke konfigureret"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafikkort er endnu ikke konfigureret"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Opløsninger ikke valgt endnu"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ønsker du at afprøve konfigurationen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advarsel: afprøvning af dette grafikkort kan få din maskine til at låse"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test konfigurationen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prøv at ændre nogle parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "En fejl opstod:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Vender tilbage om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Er dette den korrekte indstilling?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "En fejl opstod, prøv at ændre nogle parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Opløsning"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Vælg opløsning og farvedybde"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkort: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mere"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "O.k."
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspert-udgave"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Vis alle"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Opløsninger"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-type: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muse-type: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muse-enhed: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skærm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Skærms vandrette frekvens: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Skærms lodrette frekvens: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkort identifikation: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafik-hukommelse: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farvedybde: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Opløsninger %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Forbereder konfiguration af X"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Hvad ønsker du at gøre?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Skift skærmtype"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Skift grafikkort"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Foretag ændringer i server-indstillinger"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Skift opløsning"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Vis information"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Test igen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Afslut"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behold ændringer?\n"
-"Nuværende konfiguration er:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Start X ved systemstart"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Jeg kan sætte din maskine op til automatisk at starte X ved\n"
-"opstart. Ønsker du at starte X hver gang du genstarter?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Log ind i %s igen for at aktivere ændringerne"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Log ud og tryk herefter på Ctrl-Alt-Bak"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farver (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusinde farver (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusinde farver (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farver (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mb eller mere"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard-VGA, 640x480 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super-VGA, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Udvidet Super-VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Højfrekvens SVGA, 1024x768 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skærm, som kan klare 1600x1200 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skærm, som kan klare 1600x1200 ved 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Første sektor af opstartspartition"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Første sektor på disken (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO-installering"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor vil du placere opstartsprogrammet?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installering"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO med tekstmenu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk menu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start fra DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Systemopstarterens hovedindstillinger"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Systemopstarter der skal bruges"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Systemopstarterens installation"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Opstartsenhed"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (virker ikke med gamle BIOS'er)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Videoindstilling"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Ventetid før opstart af forvalgt styresystem"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Adgangskode"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Adgangskode (igen)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Begræns kommandolinie-indstillinger"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "begræns"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Rens /tmp ved hver systemopstart"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Præcis RAM-mængde, hvis påkrævet (fandt %d Mb)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Aktivér multiprofiler"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Angiv RAM-størrelse i Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Indstillingen ``Begræns kommandolinie-indstillinger'' er intet værd uden\n"
-"en adgangskode"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Prøv igen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Adgangskoderne stemmer ikke overens"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init-besked"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Åben firmwareforsinkelse"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Ventetid før kerneopstart"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Skal det være muligt at starte fra CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Skal det være muligt at starte fra OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Forvalgt styresystem?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Du besluttede at installere opstartsindlæseren på en partition.\n"
-"Dette indikerer at du allerede har en opstartsindlæser på disken som du "
-"starter op fra (fx System Commander).\n"
-"\n"
-"Hvilket drev starter du op fra?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Her er følgende typer indgange.\n"
-"Du kan tilføje flere eller ændre de eksisterende."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Tilføj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Færdig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ændr"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken type ønsker du at tilføje"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Andet styresystem (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Andet styresystem (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Andet styresystem (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Billede"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Rod"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Vedhæft"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Læs-skriv"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Usikker"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Mærkat"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Forvalgt"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-størrelse"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Ingen video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Fjern indgang"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tom mærkat er ikke tilladt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Du skal angive en kerne-fil"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Du skal angive en root-partition"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Denne mærkat er allerede brugt"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fandt %s %s grænsesnit"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Har du én til?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du nogen %s grænsesnit?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nej"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Se info for maskinel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg prøve?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I nogen tilfælde behøver %s driveren at have ekstra information for at "
-"virke\n"
-"ordentligt, selv om den normalt virker fint uden. Ønsker du at angive "
-"ekstra\n"
-"parametre for den eller tillade driveren at sondere din maskine for\n"
-"den information den behøver? Af og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke forårsage nogen skader."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specificér parametre"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Du kan nu angive parametre til modul %s.\n"
-"Bemærk at alle adresser bør indtastes med foranstillet 0x, fx '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu sætte parametre til modulet %s.\n"
-"Parametrene er i formatet ``navn=værdi navn2=værdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulindstillinger:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Indlæsning af modul %s mislykkedes.\n"
-"Ønsker du at prøve igen med andre parametre?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "adgang til X-programmer"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "adgang til rpm-værktøjer"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "tillad \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "adgang til administrative filer"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(har allerede tilføjet %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Adgangskoden er for simpel"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Indtast et brugernavn"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brugernavnet må kun indeholde små bogstaver, tal, `-' og `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Dette brugernavn eksisterer allerede"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Tilføj bruger"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Indtast en bruger\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Acceptér bruger"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Rigtige navn"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Brugernavn"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Skal"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Jeg kan sætte din maskine op til automatisk at logge en bestemt bruger på.\n"
-"Ønsker du at bruge denne finesse?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Vælg den forvalgte bruger:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Vælg den vindueshåndtering du ønsker at benytte:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Vælg det sprog, der skal bruges."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Du kan vælge andre sprog der vil være tilgængelige efter installationen"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alt"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Tillad alle brugere"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Tilpasset"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ingen fildeling"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakken %s skal være installeret. Ønsker du at installere den?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Du kan eksportere med NFS eller Samba. Hvilken vil du bruge"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Krævet pakke %s mangler"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Ønsker du at tillade brugere at eksportere nogle kataloger i deres "
-"hjemmekatalog?\n"
-"Tilladelse af dette vil sætte brugere i stand til simpelthen at klikke på "
-"'Fildeling' i konqueror og nautilus.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annullér"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Start userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Deling per bruger bruger gruppen 'fileshare'. \n"
-"Du kan bruge userdrake til at tilføje en bruger til denne gruppe."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackere"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Ringe"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Høj"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Højere"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dette niveau skal bruges med omtanke. Det gør dit system nemmere at bruge, "
-"men er meget sårbart: det må ikke bruges til en maskine der er i et netværk "
-"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
-"adgangskoder."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Kontrol af adgangskode er nu aktiveret, men brug som netværksmaskine er "
-"stadig ikke anbefalet."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dette er standard sikkerheds-anbefalingen for en maskine\n"
-" med forbindelse til Internettet som klient. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Der er allerede nogle begrænsninger, og flere automatiske kontroller bliver "
-"kørt hver nat."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Med dette sikkerhedsniveau kan brug som server komme på tale.\n"
-"Sikkerheden er nu høj nok til at systemet kan bruges som server som tillader "
-"forbindelser fra mange klienter. Bemærk: hvis din maskine kun er en klient "
-"på internettet bør du hellere vælge et lavere niveau."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baseret på det foregående niveau, men systemet er nu helt lukket.\n"
-"Sikkerhedsfaciliteterne er nu på deres højeste niveau."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Vælg sikkerhedniveau"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sikkerhedsniveau"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Brug libsafe for servere"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Et bibliotek som beskytter mod angreb via bufferoverløb og formatstrenge."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkommen til %s styresystems-vælgeren!\n"
-"\n"
-"Vælg et styresystem i den ovenstående liste eller\n"
-"vent %d sekunder for at starte standard.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB styresystemsvælgeren!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Brug tasterne %c og %c til at vælge mellem mulighederne."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoerne før opstart, eller 'c' for en kommandolinie."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den fremhævede mulighed vil blive startet automatisk om %d sekunder."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Ikke nok plads i /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Skrivebord"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start-menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere opstartsindlæseren på en %s-partition\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "endnu er ingen hjælp implementeret.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration af opstartsudseende"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fil"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fil/_Afslut"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<kontrol>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Katergoriserende oversigt i ny stil"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Oversigt i ny stil"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionel oversigt"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionel Gtk+-oversigt"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Start Aurora ved opstart"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruger for øjeblikket % som opstartshåndterer.\n"
-"Klik på Konfigurér for at starte opsætnings-vejlederen."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurér"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systemmodus"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Start X-vinduessystemet efter opstart"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nej, jeg ønsker ikke automatisk login"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg ønsker automatisk login med denne (bruger, skrivebord)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan ikke læse /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Gb"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Kb"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "Tb"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kan ikke lave øjebliksbilleder før partitionering"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Øjebliksbilleder vil være tilgængelige efter installation i %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankrig"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgien"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tjekkiet"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Tyskland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grækenland"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norge"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sverige"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holland"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italien"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Østrig"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "U.S.A."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Lav gerne en sikkerhedkopi af dine data først"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Læs omhyggeligt!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Hvis du planlægger at bruge Yaboot, skal du huske at efterlade fri plads på\n"
-"begyndelsen af disken (2048 sektorer skulle være nok)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fejl"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Vejleder"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Vælg handling"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har én stor FAT partition.\n"
-"(normalt brugt af Microsoft Dos/Windows).\n"
-"Jeg anbefaler, at du ændrer størrelsen på partitionen\n"
-"(klik på den, og klik herefter på \"Størrelsesændring\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klik på en partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journaliserende FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Andet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Filsystems-typer:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Opret"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Benyt ``%s'' i stedet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Slet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Benyt ``Afmontér'' først"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter type-ændring af partition %s vil alle data på denne partition gå tabt"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Vælg en partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Vælg en ny partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Afslut"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normal -> Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ekspert -> Normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Fortryd"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Fortsæt alligevel?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Afslut uden at gemme"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Afslut uden at skrive partitionstabellen?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ønsker du at gemme /etc/fstab-ændringerne?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Allokér automatisk"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Slet alt"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Drev-information"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle primære partitioner er brugt"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Kan ikke tilføje flere partitioner"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"For at du kan få flere partitioner, skal du slette én, så der kan oprettes "
-"en udvidet partition"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Gem partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Genskaber partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Redder partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Genindlæs partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automontering af flytbare medier"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Vælg fil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Kopien af partitionstabellen har ikke samme størrelse\n"
-"Fortsæt alligevel?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advarsel"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Indsæt en diskette i diskettedrevet\n"
-"Alle data på disketten vil blive slettet"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Forsøger at redde partitionstabellen"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljeret information"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Monteringssti"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Valg"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Størrelsesændring"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Flyt"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatér"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montér"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Tilføj til RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Tilføj til LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Afmontér"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ændr RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback anvendelse"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Opret en ny partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Startsektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Størrelse i Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Filsystemstype: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Monteringssti: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Præference: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Fjern loopback-filen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Skift partitionstype"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem ønsker du at bruge?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Skifter fra ext2 til ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvor ønsker du at montere loopback-fil %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor ønsker du at montere partitionen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
-"loopback.\n"
-"Fjern loopback først"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Udregner FAT-filsystemets grænser"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ændrer størrelsen"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Størrelsen på denne partition kan ikke ændres"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Det bør laves en backup af alle data på denne partition"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter ændring af størrelsen af partition %s vil alle data på denne partition "
-"gå tabt"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Vælg den nye størrelse"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Ny størrelse i Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk ønsker du at flytte den til?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor ønsker du at flytte den til?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Flytter"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Flytter partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Vælg en eksisterende RAID som skal udvides"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Vælg en eksisterende LVM som skal udvides"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM-navn?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Denne partition kan ikke bruges til loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback-filnavn: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Giv et filnavn"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen er allerede brugt af en anden loopback, vælg en anden fil"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Filen findes allerede. Skal den bruges?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Modulindstillinger"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "enhed"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "niveau"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "enhedsstørrelse"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vær forsigtig: denne operation er farlig."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Hvilken slags partitionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jeg kan desværre ikke på nuværende tidspunkt acceptere at oprette /boot på "
-"drevet (på en cylinder > 1024). Enten benytter du LILO, hvilket ikke vil "
-"fungere, eller du kan undlade at benytte LILO, hvilket vil betyde, at du "
-"ikke har brug for /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Den partition som du har valgt som rod-partition (/) er fysisk placeret ud "
-"over cylinder nr. 1024 på harddisken, og du har ikke lavet nogen /boot "
-"partition. Hvis du ønsker at benytte LILO, skal du oprette en /boot "
-"partition indenfor 1024-cylinder grænsen."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valgt en programmeret RAID-partition som rod (/).\n"
-"Ingen systemopstarter kan håndtere dette uden en /boot partition.\n"
-"Så vær omhyggelig med at tilføje en /boot partition"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen for disk %s vil nu blive skrevet på disken!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du skal genstarte maskinen for at aktivere ændringerne"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formatering af partitionen %s vil alle data på denne partition gå tabt"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formaterer"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Skjul filer"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Flyt filer til den nye partition"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Katalog %s indeholder allerede nogen data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Flytter filer til den nye partition"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partition %s er nu kendt som %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Enhed: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-drevbogstav: %s (bare et gæt)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Navn: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Størrelse: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d til %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ikke formateret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Monteret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition som opstartes som standard\n"
-"    (gælder kun MS-DOS-opstart, ikke LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Enhedsstørrelse %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diske %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnavn: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Denne partition er nok\n"
-"en driver-partition, du skal\n"
-"sandsynligvis lade den være.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne specielle Bootstrap-\n"
-"partition er for at\n"
-"dual-boote dit system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Størrelse: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diske %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabel-type: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "på bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Krypteringsnøgle for filsystem"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Vælg din krypteringsnøgle for filsystemet"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Denne krypteringsnøgle er for nem at gætte (skal mindst være på %d tegn)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Krypteringsnøglerne stemmer ikke overens"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Krypteringsnøgle"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Krypteringsnøgle (igen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Skift type"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klik på et medie"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Søg efter servere"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering af %s mislykkedes"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ved ikke hvordan man formaterer %s som type %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montering af partition %s i katalog %s mislykkedes"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck afsluttet med fejlkode %d eller signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fejl ved afmontering af %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpel"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "med /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruge JFS på partitioner mindre end 16Mb"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruge ReiserFS på partitioner mindre end 32Mb"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringsstier skal begynde med /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Der findes allerede en partition med monterings-sti %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dette katalog bør ligge på rod-filsystemet"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Du skal have et rigtigt filsystem (ext2, reiserfs) til dette "
-"monteringspunkt\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Du kan ikke bruge et krypteret filsystem for monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ingenting at lave"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fejl ved åbning af %s for skrivning: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Der er opstået en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
-"der kan oprettes nye filsystemer. Undersøg din maskine for at finde årsagen "
-"til problemet"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Du har ikke nogen partitioner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux er et flerbrugersystem, og dette betyder at hver bruger kan have "
-"sine egne præferencer, sine egne filer og så videre. Du kan læse "
-"brugervejledningen for at lære mere.\n"
-"Men i modsætning til root, som er administratoren, vil brugerne som du "
-"tilføjer her ikke have lov til at ændre nogetsomhelst undtagen deres egne "
-"filer og deres egen opsætning. Du skal oprette i det mindste én almindelig "
-"bruger til dig selv.\n"
-"Dette er den konto som du bør bruge til almindelig brug. Selvom det er meget "
-"praktisk at logge ind som root hver dag, kan det også være meget farligt!\n"
-"Den mindste fejltagelse kan betyde at dit system ikke vil virke mere. Hvis "
-"du laver en alvorlig fejltagelse som almindelig bruger, vil du kun måske "
-"tabe nogen information, men ikke hele systemet.\n"
-"\n"
-"Først skal du indtaste dit rigtige navn. Dette er ikke krævet, selvfølgelig "
-"kan du faktisk skrive hvad du vil. DrakX vil så tage det første ord du skrev "
-"i boksen og og overføre det som brugernavn. Dette er navnet, som denne "
-"bruger skal bruge for at logge ind på systemet. Du kan ændre dette. Du skal "
-"så indtaste en adgangskode hér. Adgangskoden for en ikke-priviligeret "
-"(normal) bruger er ikke så vigtigt som det for Root fra et sikkerhedsmæssigt "
-"synspunkt, men det er ingen grund til at negligere det alligevel - når det "
-"kommer til stykket er dine filer der er i fare. Hvis du klikker på Acceptér "
-"bruger, kan du tilføje så mange som du ønsker. Tilføj en bruger for hver af "
-"dine venner: fx din far og din søster. Når du har tilføjet alle de brugere "
-"du ønsker, vælg da Færdig.\n"
-"\n"
-"Klik på Avanceret-knappen lader dig ændre standard-skal for denne bruger\n"
-"(bash er standard)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovenfor er listet de eksisterende Linux-partitioner genkendt på din disk. Du "
-"kan beholde valgene gjort af vejlederen, de er velegnede til almindelig "
-"brug.  Hvis du ændrer disse valg skal du i det mindste definere en rod-"
-"partition '/'. Lad være med at vælge en for lille partition, ellers vil du "
-"ikke kunne installere nok programmel. Hvis du ønsker at lagre data på en "
-"separat partition, skal du også vælge en '/home' (kun muligt hvis du har "
-"mere end én Linux-partition). \n"
-"Hver partition er listet som følger: 'Navn', 'Kapacitet'.\n"
-"\n"
-"'Navn' er kodet som følger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-"   * 'a' betyder 'hoved-drev på den primære IDE controller',\n"
-"\n"
-"   * 'b' betyder 'slave-drev på den primære IDE controller',\n"
-"\n"
-"   * 'c' betyder 'hoved-drev på den sækundære IDE controller',\n"
-"\n"
-"   * 'd' betyder 'slave-drev på den sækundære IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'første drev', 'b' betyder det 'andet drev', "
-"osv."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux installationen er fordelt på flere cdrom-er. DrakX véd om en "
-"valgt pakke ligger på en anden cdrom og vil udskyde den aktuelle cd og bede "
-"dig om at isætte en anden, om nødvendigt."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det er nu tid til at angive hvilke pakker du vil installere på dit system. "
-"Der er tusindvis af pakker til dit Mandrake Linux system, og det forventes "
-"ikke at du kender dem allesammen udenad.\n"
-"\n"
-"Hvis du udfører en standard-installation fra cdrom vil du først blive bedt "
-"om at angive de cd-er som du har nu (kun i ekspert-version). Tjek navnene på "
-"cd'erne og fremhæv boksene svarende til de cd-er du har liggende for "
-"installationen. Klik O.k. når du er klar til at fortsætte.\n"
-"\n"
-"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
-"maskine. Grupperne selv er ordnet i 4 grupper:\n"
-"\n"
-" * 'Arbejdsstation': Hvis din maskine skal bruges som en arbejdsstation, "
-"vælg da en eller flere af de tilsvarende grupper.\n"
-"\n"
-" * 'Udvikling': hvis maskinen skal bruges til programmering vælg da de "
-"ønskede grupper.\n"
-"\n"
-" * 'Server': hvis det er planen at maskinen skal være en server, er du her i "
-"stand til at vælge de mest almindelige tjenester, som du ønsker at se "
-"installeret  på maskinen.\n"
-"\n"
-" * 'Grafisk miljø': Endelig skal du vælge foretrukne grafiske miljø. Vælg "
-"mindst ét, hvis du ønsker at have en grafisk arbejdsstation!\n"
-"\n"
-"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om "
-"denne gruppe. Hvis du ikke vælger nogen grupper ved installation (i  "
-"modsætning til opgradering), vil en dialog komme frem som foreslår dig  "
-"forskellige former for minimal installation: \n"
-"\n"
-" * 'Med X' Installerer de færrest mulige pakker for at få en fungerende "
-"grafisk arbejdsstation;\n"
-"\n"
-" * 'Med basal dokumentation' Installerer det basale system plus basale "
-"nytteprogrammer og tilhørende dokumentation. Denne installation er passende "
-"til at sætte en server op.\n"
-"\n"
-" * 'Mindst mulige installering' Vil installere den mindst mulige nødvendigt "
-"for at få et virkende Linux-system kun med kommandolinjer. Denne "
-"installation fylder omkring 65 Mb.\n"
-"\n"
-"Du kan afkrydse boksen 'Individuelt pakkevalg', hvilket  er nyttigt, hvis du "
-"kender de tilbudte pakker godt, eller hvis du ønsker at have fuld kontrol "
-"over hvad der skal installeres.\n"
-"\n"
-"Hvis du har startet installationen i 'Opdatering'-tilstand, kan du fravælge "
-"alle grupper for at undgå at installere nogen nye pakker. Dette er nyttigt "
-"ved  reparation eller opdatering af det eksisterende system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Endelig, afhængigt af om du valgte at udvælge individuelle pakker eller ej, "
-"vil du blive præsenteret for et træ med alle pakker opdelt i grupper og "
-"undergrupper. Under gennembladring af træet kan du udvælge hele grupper, "
-"undergrupper eller bare pakker.\n"
-"\n"
-"Hver gang du udvælger en pakke i træet vil en beskrivelse fremkomme til "
-"højre. Når du har afsluttet dine udvælgelser, så klik på Installér-knappen. "
-"Så begynder selve installationen. Afhængig af din maskines hurtighed og "
-"antal pakker som skal installeres kan det tage et stykke tid at gøre "
-"processen færdig. Et skøn på tiden det tager for færdiggørelse vises på "
-"skærmen, så du kan se om der skulle være tid til at nyde en kop kaffe.\n"
-"\n"
-"I tilfældet af at en server-pakke er blevet valgt enten med vilje, eller "
-"fordi den var en del af en hel gruppe, vil du blive spurgt om du virkelig "
-"ønsker at installere disse servere. Under Linux Mandrake bliver installerede "
-"servere startet op ved opstart af maskinen. Selvom de er sikre og ikke har "
-"nogen kendte problemer på udgivelsestidspunktet for distributionen, er det "
-"muligt at sikkerhedshuller opdages efter at denne version af Mandrake Linux "
-"blev færdiggjort. Specielt hvis du ikke véd hvad det er for noget, så klik "
-"Nej her. Et klik med Ja her vil installere de nævnte servere og de vil som "
-"standard blive startet automatisk!\n"
-"\n"
-"Automatiske afhængigheder-valget deaktiverer simpelthen advarselsdialogen, "
-"som vises hver gang installeringsprogrammet automatisk vælger en pakke. "
-"Dette sker fordi det er blevet beregnet at den er krævet for at "
-"tilfredsstille en afhængighed fra en anden pakke for at kunne færdiggære en "
-"vellykket installation.\n"
-"\n"
-"Det klejne disketteikon i bunden af listen muliggør indlæsning af en "
-"pakkeliste udvalgt ved en tidligere installation. Klik på denne ikon vil "
-"bede dig om at indsætte en diskette tidligere frembragt ved slutningen på en "
-"anden installation. Se råd nr to i det sidste trin for hvordan en sådan "
-"diskette kan laves."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Du bliver nu foreslået at opsætte din internet- eller netværksopkobling. "
-"Hvis du vil forbinde din maskine til internettet eller til et lokalnetværk "
-"så klik på 'O.k.'. Den automatiske opdagelse af netværksenheder og modem vil "
-"blive startet. Hvis opdagelsen mislykkes så fjern markering i boksen 'Brug "
-"automatisk detektion' næste gang. Du kan også vælge at ikke konfigurere "
-"netværket, eller gøre det senere; i så tilfælde skal du bare klikke på "
-"'Annullér'-knappen.\n"
-"\n"
-"Mulige forbindelser er: almindeligt modem, ISDN-modem, ADSL-forbindelse, "
-"kabel-modem, og endelig en simpel LAN-forbindelse (Ethernet).\n"
-"\n"
-"Vi vil ikke her gå i detaljer med hver konfiguration. Men forsikr dig om, at "
-"du har alle parametrene fra din internetudbyder eller systemadministrator.\n"
-"\n"
-"Du kan læse i kapitlet i håndbogen omkring internetforbindelser om detaljer "
-"omkring konfigureringen, eller simpelthen vente til dit system er "
-"installeret og så bruge programmet beskrevet dér til at konfigurere din "
-"forbindelse.\n"
-"\n"
-"Hvis du vil konfigurere netværket senere efter installationen, eller hvis du "
-"har afsluttet konfigureringen af din netværksforbindelse, vælg da 'Færdig'."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Du kan nu vælge hvilke tjenester du ønsker skal startes ved opstart af "
-"maskinen.\n"
-"\n"
-"Her præsenteres alle de tjenester, som er med i den aktuelle installation. "
-"Gennemse dem omhyggeligt og vælg dem fra som ikke altid er nødvendige ved "
-"opstarten.\n"
-"\n"
-"Du kan få en kort forklarende tekst om en tjeneste ved at vælge en bestemt "
-"tjeneste. Hvis du ikke er sikker på om en tjeneste er nyttig eller ej, er "
-"det dog sikrere at bruge den foreslåede opførsel.\n"
-"\n"
-"Vær specielt varsom på dette trin hvis du planlægger at bruge maskinen som "
-"server: du vil formentlig ønske ikke at starte nogensomhelst tjeneste op som "
-"du ikke har brug for. Husk at adskillige tjenester kan være farlige hvis de "
-"er aktiveret på en server. Vælg som hovedregel kun de tjenester som du "
-"virkelig behøver."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux håndterer tiden i GMT (Greenwich Mean Time) og oversætter den til "
-"lokal tid ifølge den tidszone du har valgt. Det er imidlertid muligt at "
-"deaktivere dette ved at fravælge 'Maskinens ur sat til GMT' så maskinens ur "
-"er det samme som systemets ur. Dette er nyttigt når maskinen også bruges til "
-"andre operativsystemer som Windows.\n"
-"\n"
-"Muligheden 'Automatisk tidssynkronisering' vil automatisk tilpasse uret ved "
-"at forbinde til en ekstern tidsserver på internettet. Vælg en server der "
-"ligger tæt på dig i listen der præsenteres. Selvfølgelig skal du have en "
-"fungerende internetforbindelse for at denne facilitet kan fungere. Den vil "
-"faktisk installere en tidsserver på din maskine, som om ønsket kan bruges af "
-"andre maskiner på dit lokalnetværk."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (for X-vinduessystem) er hjertet af GNU/Linux' grafiske grænseflade, "
-"hvilket alle de grafiske miljøer (KDE, Gnome, AfterStep, WindowMaker)...), "
-"som kommer med Mandrake Linux, bygger på. I dette afsnit vil DrakX forsøge "
-"at konfigurere X automatisk.\n"
-"\n"
-"Det er meget sjældent at dette mislykkes for DrakX, med mindre maskinellet "
-"er meget gammelt (eller meget nyt). Hvis det lykkes, vil DrakX starte X "
-"automatisk med den bedst mulige opløsning afhængig af skærmens størrelse. Et "
-"vindue vil så komme frem og spørge om du kan se det.\n"
-"\n"
-"Hvis du laver en ekspert-installering, vil du komme ind i X-konfigurerings- "
-"vejlederen. Se det tilhørende afsnit af manualen for yderligere oplysning om "
-"denne vejleder.\n"
-"\n"
-"Hvis du kan se beskeden under afprøvningen, og svarer Ja, så vil DrakX "
-"fortsætte til det næste trin. Hvis du ikke kan se beskeden, betyder det "
-"simpelthen at konfigurationen var forkert, og testen vil automatisk "
-"afsluttes efter 10 sekunder, og genfremvise skærmen."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Måske er du ikke særligt tilfreds med det første forsøg med X konfigurering "
-"(skærmen for lille, flyttet til venstre eller højre...). Derfor vil DrakX "
-"spørge dig om konfigurationen passer dig, selvom X starter op korrekt. DrakX "
-"vil også foreslå ændringer ved at vise en liste af gyldige tilstande som den "
-"kunne finde, og så bede dig om at vælge én. \n"
-"Som en sidste udvej, hvis du stadig ikke kan få X til at virke, vælg da Ændr "
-"grafikkort, vælg Ukendt kort, og når du bliver spurgt om hvilken server du "
-"vil have, vælg da FBDev. Dette er en fejlsikker mulighed som virker med alle "
-"moderne grafikkort. Vælg derefter Test igen for at være sikker."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Til sidst vil du blive spurgt om du ønsker at se den grafiske grænseflade "
-"ved opstart. Bemærk at du vil blive spurgt om dette selvom du har valgt ikke "
-"at afprøve konfigurationen. Selvfølgelig vil du ønske at svare Nej, hvis din "
-"maskine skal bruges som server, eller hvis ikke lykkedes dig at få skærmen "
-"konfigureret."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux-cdrommen har en indbygget rednings-tilstand. Du kan få fat i "
-"denne ved at starte op fra cdrommen, trykke 'F1'-tasten ved opstart, og "
-"indtaste 'rescue' ved opstartsledeteksten. Men i tilfælde af at din maskine "
-"ikke kan starte op fra cdrommen, bør du komme tilbage til dette trin for "
-"hjælp i mindst to situationer:\n"
-"\n"
-" * ved installering af opstartsindlæseren vil drakX genskrive "
-"opstartssektoren (MBR) på din hoveddisk (medmindre du bruger en anden "
-"opstartshåndterer) så du kan starte enten Windows eller GNU/Linux (forudsat "
-"du har Windows på dit system). Hvis du har brug for at geninstallere "
-"Windows, vil Microsoft installeringsprocessen overskrive opstartssektoren, "
-"og så vil du ikke være i stand til at starte GNU/Linux!\n"
-"\n"
-" * Hvis der opstår et problem, og du ikke kan starte GNU/Linux op fra "
-"harddisken, vil denne diskette være den eneste måde at starte GNU/Linux op "
-"på. Den indeholder et pænt antal systemværktøjer til at genskabe et system "
-"som er gået ned pga. strømsvigt, en uheldig tastefejl, en skrivefejl i en "
-"adgangskode, eller nogen anden årsag.\n"
-"\n"
-"Når du klikker på dette trin, vil du blive bedt om at indsætte en diskette i "
-"drevet. Disketten du indsætter skal være tom eller kun indeholde data som du "
-"ikke har brug for. Du behøver ikke formatere den, da drakX vil overskrive "
-"hele disketten."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Nu skal du vælge hvor på din harddisk du vil installere dit Mandrake Linux-"
-"operativsystem. Hvis disken er tom eller et eksisterende operativsystem "
-"bruger alt pladsen på den, bliver du nødt til at partitionere den. "
-"Partitionering vil sige at disken deles i logiske dele for at gøre plads til "
-"dit nye Mandrake Linux-system.\n"
-"\n"
-"Da en partitionering normalt ikke kan fortrydes kan det godt være  "
-"frustrerende og stressende for nybegyndere. Heldigvis er der en vejleder som "
-"forenkler denne proces. Før du begynder studér da i manualen og tag den tid "
-"du skal bruge.\n"
-"\n"
-"Hvis du kører installeringen i ekspert-tilstand kommer du ind i Mandrake "
-"Linux' partitioneringsværktøj, DiskDrake. Dette vil lade dig finindstille "
-"dine partitioner. Se kapitlet om DiskDrake i manualen. Fra installations-"
-"grænsefladen kan du bruge de vejledere som beskrevet her ved at klikke "
-"knappen 'Vejleder' på grænsefladen.\n"
-"\n"
-"Hvis partitionerne allerede er definerede (fra en tidlige installation eller "
-"fra et andet partitions-værktøj), skal du bare vælge dem for at installere "
-"dit Linux system\n"
-"\n"
-"Hvis partitionerne ikke er lavet endnu, bliver du nødt til at oprette dem "
-"ved brug af vejlederen. Afhængig af din disks konfiguration er flere "
-"muligheder tilstede:\n"
-"\n"
-" * 'Brug fri plads': Dette vil simpelthen føre til en automatisk opdeling af "
-"den ledige diskplads. Du vil ikke blive spurgt om mere.\n"
-"\n"
-" * 'Brug eksisterende partition': vejlederen har fundet en eller flere "
-"eksisterende Linux-partitioner på din harddisk. Hvis du vil bruge dem, så "
-"vælg denne mulighed.\n"
-"\n"
-" * 'Brug den fri plads på Windows-partitionen': hvis Microsoft Windows er "
-"installeret på din disk og bruger al pladsen, bliver du nødt til at lave "
-"plads til Linux. For at gøre det kan du slette dine Microsoft Windows "
-"partitioner og data (se \"Slet hele disken\" eller \"Ekspert niveau\" ) "
-"eller ændre størrelsen på din Microsoft Windows-partition. "
-"Størrelsesændringen kan fortages uden tab af data. Denne løsning er "
-"anbefalet hvis du vil bruge både Mandrake Linux og Microsoft Windows på "
-"samme maskine.\n"
-"\n"
-"  Før du vælger denne løsning, bør du forstå at størrelsen på din Microsoft "
-"Windows partition vil blive mindre end den er nu. Det betyder at du vil have "
-"mindre fri plads under Microsoft Windows til at gemme din data eller "
-"installere nyt programmel.\n"
-"\n"
-" * 'Slet hele disken': hvis du vil slette alle data på alle partitioner på "
-"denne disk og erstatte dem med dit nye Mandrake Linux-system, kan du vælge "
-"denne mulighed. Vær forsigtig med denne løsning, du vil ikke være i stand "
-"til at fortryde dine ændringer efter at du har sagt ja.\n"
-"\n"
-"   !! Hvis du bruger denne mulighed vil alle data på din disk gå tabt. !!\n"
-"\n"
-" * 'Fjern Windows': dette vil simpelthen slette alt på disken og begynde fra "
-"en frisk, og partitionere fra ny. Alle data på din disk vil gå tabt.\n"
-"\n"
-"   !! Hvis du bruger denne mulighed vil alle data på din disk gå tabt. !!\n"
-"\n"
-" * 'Ekspert-modus': hvis du vil partitionere disken i hånden, kan du vælge "
-"dette alternativ. Vær forsigtig før du vælger denne løsning. Den giver dig "
-"mange muligheder, men er også farlig.  Du kan meget nemt komme til at slette "
-"alle dine data. Så lad være med at vælge den løsning med mindre du véd hvad "
-"du gør."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Værsgo'. Installationen en nu færdig og dit GNU/Linux-system er nu klar til "
-"brug. Klik bare O.k. for at genstarte systemet. Du kan starte GNU/Linux "
-"eller Windows, som du foretrækker det (hvis du har to systemer), så snart "
-"din maskine er startet op igen.\n"
-"\n"
-"Avanceret-knappen viser to ekstra knapper for at:\n"
-"\n"
-" * generere en auto-installeringsdiskette: for at oprette en installerings- "
-"diskette som automatisk vil udføre en hel installation uden hjælp fra en "
-"operatør, magen til den installation du lige har konfigureret.\n"
-"\n"
-"   Bemærk at to forskellige muligheder er tilstede efter klik på knappen:\n"
-"\n"
-"   * Genafspil: Dette er en delvist automatiseret installering da  "
-"partitioneringstrinnet (og kun dette trin) forbliver interaktiv.\n"
-"\n"
-"   * Automatisk: Fuldautomatisk installering: harddisken bliver fuldstændig "
-"genoverskrevet, alle data forsvinder.\n"
-"\n"
-"   Denne facilitet er meget nyttig ved installering af et stort antal ens "
-"maskiner. Se afsnittet om autoinstallering på vores websted.\n"
-"\n"
-" * Gem pakkevalg(*): Gemmer pakkevalget som lavet tidligere. Så når en ny "
-"installering laves, kan disketten indsættes i drevet og installeringen kan "
-"køres ved at bruge F1 på hjælpeskærmen idet der indtastes >>linux defcfg="
-"\"floppy\"<<.\n"
-"\n"
-"(*) Du skal have en diskette formateret til FAT (denne oprettes i GNU/Linux "
-"ved at skive \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Enhver partition der netop er blevet defineret, skal formateres til brug "
-"(formatering betyder oprettelse af et filsystem).\n"
-"\n"
-"Nu kan du også ønske at omformatere nogle allerede eksisterende partitioner "
-"for at slette de data som de indeholder. Hvis du ønsker dette, så markér "
-"også de partitioner som du ønsker at formatere.\n"
-"\n"
-"Bemærk at det ikke er nødvendigt at omformatere alle allerede eksisterende "
-"partitioner. Det er nødvendigt at omformatere de partitioner, der indeholder "
-"operativsystemet (såsom '/', '/usr' og '/var', men du er ikke nødt til at "
-"omformatere partitioner som du ønsker at beholde (typisk /home).\n"
-"\n"
-"Vær forsigtig med valg af partitioner; efter formatering vil alle data være "
-"slettede på de valgte partitioner, og du vil ikke kunne redde nogetsomhelst "
-"af det.\n"
-"\n"
-"Klik på 'Ok' når du er klar til at formatere partitioner.\n"
-"\n"
-"Klik på 'Annullér' hvis du ønsker at vælge andre partitioner til at "
-"installere dit nye Mandrake Linux operativsystem.\n"
-"\n"
-"Klik på 'Avanceret' for at vælge partitioner som du ønsker at tjekke for "
-"dårlige blokke."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Dit nye Mandrake Linux styresystem er i færd med at blive installeret. "
-"Afhængig af det antal pakker, du installerer og hastigheden på din maskine "
-"kan dette tage fra nogen få minutter til en del længere tid. \n"
-"Hav venligst tålmodighed med dette."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"På det tidspunkt hvor du installerer Mandrake Linux er det sandsynligt at "
-"nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. "
-"Nogle fejl er måske blevet rettet, og sikkerhedsproblemer måske løst. Vi "
-"foreslår dig at hente disse ned fra internettet for at disse opdateringer "
-"kan komme dig til gode. Vælg 'Ja' hvis du har en fungerende internet- "
-"forbindelse eller 'Nej' hvis du foretrækker at installere opdaterede pakker "
-"senere.\n"
-"\n"
-"Valg af 'Ja' viser en liste af steder hvorfra opdateringer kan hentes. Vælg "
-"en der er nær ved dig. Så vil et træ med pakkevalg fremkomme:  gennemse "
-"valget og tryk 'Installér' for at modtage og installere den valgte pakke "
-"eller 'Annullér'for at afbryde."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Før du går videre bør du læse betingelserne i licensen omhyggeligt.  Den "
-"omfatter hele Mandrake Linux distributionen, og hvis du ikke er  enig i alle "
-"betingelserne i den, så klik på 'Nægt'-knappen. Det vil  øjeblikkeligt "
-"afslutte installationen. For at fortsætte installationen  skal du klikke på "
-"'Acceptér'-knappen."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nu er det tid til at vælge det ønskede sikkerhedsniveau for maskinen. "
-"Hovedreglen er at jo mere kendt maskinen er, og jo vigtigere data er, des "
-"højere bør sikkerhedsniveauet være. Men et højere sikkerhedsniveau vindes "
-"normalt på bekostning af letheden af anvendelsen. Kig i kapitlet MSEC i "
-"referencehåndbogen for mere information om betydningen af niveauerne.\n"
-"\n"
-"Hvis du ikke véd hvad du skal vælge, så behold den foreslåede mulighed."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu skal du vælge hvor Mandrake Linux skal installeres. Hvis partitionerne "
-"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
-"fra et andet partitioneringsværktøj), kan du bruge dem. Ellers skal disk-"
-"partitionerne laves først.\n"
-"\n"
-"For at lave partitioner skal du først vælge en harddisk. Du kan vælge disken "
-"der skal partitioneres ved at trykke på \"hda\" for den første IDE disk, "
-"\"hdb\" for den anden eller \"sda\" for den første SCSI disk og så videre.\n"
-"\n"
-"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
-"\n"
-"  * 'Slet alt': Dette valg sletter alle partitioner på den valgte disk.\n"
-"\n"
-"  * 'Allokér automatisk': dette valg tillader dig automatisk at lave Ext2 og "
-"swappartitioner på den fri plads på din disk.\n"
-"\n"
-"* 'Mere': giver adgang til flere faciliteter:\n"
-"\n"
-"    * 'Gem partitionstabel': Gemmer din partitionstabel på en diskette. "
-"Nyttigt ved senere redning af partitionstabellen, om nødvendigt. Det er "
-"stærkt anbefalet at bruge dette trin.\n"
-"\n"
-"    * 'Genskab partitionstabel': lader dig genskabe en tidligere gemt "
-"partitionstabel fra diskette.\n"
-"\n"
-"    * 'Red partitionstabel': hvis din partitionstabel er beskadiget, kan du "
-"prøve at redde den med denne mulighed. Vær forsigtig og husk at det kan slå "
-"fejl.\n"
-"    * 'Automatisk montering af flytbart medie': fravalg af denne mulighed "
-"vil tvinge brugere til at manuelt montere og afmontere media såsom disketter "
-"og cdrommer.\n"
-"\n"
-" * 'Vejleder': Hvis du ønsker at bruge vejlederen til at partitionere din "
-"disk, kan du bruge denne mulighed. Dette anbefales, hvis du ikke har det "
-"store kendskab til partitionering.\n"
-"\n"
-" * 'Fortryd': Du kan bruge denne mulighed for at annullere dine ændringer.\n"
-"\n"
-" * 'Skift mellem normal og ekspert-version': giver mulighed for flere "
-"handlinger med partitioner (type, valgmuligheder, format) og giver mere "
-"information.\n"
-"\n"
-" * 'Færdig': når du er færdig med partitionering af din disk, dette vil "
-"skrive ændringerne tilbage på disken.\n"
-"\n"
-"Bemærk: du kan nå alle mulighederne ved at bruge tastaturet: navigér gennem "
-"partitionerne med Tab og op- og ned-pilene.\n"
-"\n"
-"Når en partition er valgt kan du bruge:\n"
-"\n"
-" * Ctrl-c for at lave en ny partition (Når en tom partition er valgt);\n"
-"\n"
-" * Ctrl-d for at slette en partition;\n"
-"\n"
-" * Ctrl-m for at sætte et monteringssti.\n"
-"\n"
-"For at få information om de forskellige tilgængelige filsystemstyper kan du "
-"læse kapitlet ext2fs i 'Referencemanualen'.\n"
-"\n"
-"Hvis du er i gang med at installere på en PPC-maskine skal du lave en lille "
-"HFS-'bootstrap'-partition på mindst 1MB til  Yaboot-systemstarteren. Hvis du "
-"vælger at lave partitionen en smule større, f.eks. 50MB kan den være nyttig "
-"til at gemme en ekstra kerne og ramdisk-billede for nødsituationer ved "
-"opstart."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mere end én Microsoft Windows partition er blevet genkendt på dit diskdrev. "
-"Vælg den som du ønsker at ændre størrelse på for at kunne installere dit nye "
-"Mandrake Linux operativsystem.\n"
-"\n"
-"Hver partition er listet som følger: 'Linux navn', 'Windows navn', "
-"'Kapacitet'.\n"
-"\n"
-"'Linux navn' er kodet som følger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-"   * 'a' betyder 'hoved-drev på den primære IDE controller',\n"
-"\n"
-"   * 'b' betyder 'slave-drev på den primære IDE controller',\n"
-"\n"
-"   * 'c' betyder 'hoved-drev på den sækundære IDE controller',\n"
-"\n"
-"   * 'd' betyder 'slave-drev på den sækundære IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'første drev', 'b' betyder det 'andet drev', "
-"osv.\n"
-"\n"
-"'Windows navn' er det bogstav som dit drev har under Windows (den første\n"
-"disk eller partition kaldes 'C:')."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Hold ud! Dette kan tage adskillige minutter."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX skal nu vide om du vil udføre en standard-installation ('Anbefalet'), "
-"eller om du ønsker at have større kontrol ('Ekspert'). Du kan også vælge om "
-"du ønsker at udføre en nyinstallering eller en opgradering af et  "
-"eksisterende Mandrake Linux-system. \n"
-"\n"
-"* 'Installér' udraderer helt det gamle system. Afhængigt af hvad der i "
-"øjeblikket er på din maskine vil du dog kunne beholde nogen gamle "
-"partitioner (Linux eller andet) uændret.\n"
-"\n"
-"* 'Opgradér' Denne installationsklasse tillader simpel opdatering af de "
-"pakker der i øjeblikket er installeret på dit Mandrake Linux-system. Den "
-"beholder de nuværende partitioner på dine diskdrev så vel som opsætningen af "
-"brugere. Alle andre konfigurationstrin forbliver mulige som for almindelig "
-"installation.\n"
-"\n"
-"* 'Opgradér kun pakker' Denne spritnye installationsklasse kan opgradere et "
-"eksisterende Linux Mandrake-system idet al systemkonfiguration beholdes "
-"uændret. Tilføjelse af nye pakker til den nuværende installation vil også "
-"være muligt.\n"
-"\n"
-"Afhængig af din viden om GNU/Linux kan du vælge et af de følgende:\n"
-"\n"
-"* Anbefalet: hvis du aldrig har installeret et GNU/Linux-operativsystem så "
-"vælg dette. Installationen vil være meget nem og du vil kun blive stillet "
-"nogen få spørgsmål.\n"
-"\n"
-"* Ekspert: hvis du har en god viden om GNU/Linux, kan du vælge denne "
-"installationsklasse. Ekspertinstallationen vil lade dig lave en meget "
-"tilpasset installation. Besvarelse af nogen af spørgsmålene kan være meget "
-"svært hvis du ikke har så godt et kendskab til GNU/Linux, så lad være med at "
-"vælge dette, medmindre du véd hvad du laver."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalt vil drakX have valgt det rigtige tastatur til dig (afhængigt af  "
-"sproget du har valgt) og du vil så ikke se dette trin. Men du har måske "
-"ikke  et tastatur som svarer nøjagtigt til dit sprog: for eksempel hvis du "
-"er en  engelsktalende svejtser, vil du måske stadig ønske at dit tastatur "
-"skal være  et svejtsisk tastatur. Eller hvis du taler engelsk men bor i "
-"Québec, er du  måske i samme situation. I begge tilfælde må du gå tilbage "
-"til dette  installationstrin og vælge et passende tastatur fra listen.\n"
-"\n"
-"Klik på 'mere'-tasten for at blive præsenteret for den fulde \n"
-"liste af understøttede tastaturer."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Vælg dit foretrukne sprog for brug under installation og på systemet. \n"
-"Der er en Avanceret-knap som lader dig vælge andre sprog, der installeres  "
-"på maskinen. Valg af andre sprog vil installere de sprogspecifikke filer for "
-"systemdokumentation og programmer. Hvis du for eksempel vil beværte folk fra "
-"Spanien på din maskine, vælg da engelsk som hovedsproget i træ-visningen, og "
-"afkryds så i den avancerede afdeling boksen  svarende til spansk|Spanien.\n"
-"\n"
-"Bemærk at flere sprog kan installeres samtidigt. Når du er færdig med at "
-"vælge yderligere sprog, så klik O.k. for at fortsætte."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Normalt antager drakX at du har en to-knapsmus og vil lave en opsætning hvor "
-"den tredje knap emuleres. DrakX vil automatisk vide om den er PS/2, seriel "
-"eller USB.\n"
-"\n"
-"Hvis du ønsker en anden type mus, vælg da den rigtige type mus fra den viste "
-"liste.\n"
-"\n"
-"Hvis du vælger en mus forskellig fra den forvalgte, vil du blive præsenteret "
-"for en skærm for museafprøvning. Brug knapperne og hjulet for at efterprøve, "
-"om indstillerne er gode. Hvis musen ikke virker korrekt, tryk da på "
-"mellemrumstangenten eller vognretur for at 'Annullere' og vælg forfra."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vælg den rigtige port. For eksempel er navnet for COM1-porten  under MS "
-"Windows 'ttyS0' under GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux- "
-"system: Du skal indtaste din root-adgangskode. Root er systemadministratoren "
-"og er den eneste der har lov til at lave opdateringer, tilføje brugere, "
-"ændre i den overordnede systemkonfiguration og så videre. Kort sagt, root "
-"kan gøre alt! Derfor skal du vælge en adgangskode der er svær at gætte - "
-"DrakX vil fortælle dig hvis det er for nemt. Som víst kan du vælge ikke at "
-"indtaste en adgangskode, men vi advarer dig på det kraftigste mod dette, om "
-"ikke andet med én begrundelse: tro ikke at fordi du startede GNU/Linux op, "
-"så er dine andre operativsystemer velforvarede. Da root kan overvinde alle "
-"forhindringer og uforvarende slette alle data på partitioner ved sorgløst at "
-"behandle partitionerne selv, er det vigtigt at det er vanskeligt at blive "
-"root.\n"
-"\n"
-"Adgangskoden bør være en blanding af bogstaver og tal og mindst 8 tegn "
-"langt. Skriv aldrig en adgangskode ned for root - det gør det for nemt at "
-"bryde ind i et system.\n"
-"\n"
-"Gør dog ikke adgangskoden for lang eller kompliceret da du skal være i stand "
-"til at huske den uden for stort besvær.\n"
-"\n"
-"Adgangskoden vil ikke blive vist på skærmen når du indtaster den. Du skal "
-"derfor indtaste adgangskoden to gange, for at begrænse risikoen for "
-"tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil "
-"denne 'ukorrekte' adgangskode være krævet når du forbinder dig til "
-"systemet.\n"
-"\n"
-"I ekspert-tilstand vil du blive spurgt om du vil koble op til en "
-"autenticerings-server, som NIS eller NDAP.\n"
-"\n"
-"Hvis dit netværk bruger LDAP (eller NIS)-protokollen til autentificering, "
-"vælg da LDAP (eller NIS). Hvis du ikke véd det, så spørg din "
-"systemadministrator.\n"
-"\n"
-"Hvis din maskine ikke er forbundet til noget administreret netværk, ønsker "
-"du nok at vælge Lokale filer for autentificering"
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO og GRUB er opstartsindlæsere for GNU/Linux. Dette trin er normalt helt "
-"automatiseret. Faktisk vil drakX analysere opstartsektoren på disken og vil "
-"handle ud fra dette, afhængig af hvad den finder hér:\n"
-"\n"
-" * Hvis den finder en Windows opstartssektor vil den erstatte den med en "
-"GRUB/LILO opstartssektor, så du kan starte GNU/Linux eller et andet "
-"operativsystem;\n"
-"\n"
-" * Hvis den finder en GRUB eller LILO opstartssektor vil den erstatte den "
-"med en ny;\n"
-"\n"
-"Hvis den er i tvivl vil drakX vise en dialog med forskellige muligheder.\n"
-"\n"
-" * 'Opstartsindlæser der bruges': du får her tre muligheder:\n"
-"\n"
-"   * 'GRUB': hvis du foretrækker GRUB (tekstmenu).\n"
-"\n"
-"   * 'LILO med grafisk menu': hvis du foretrækker LILO med "
-"grafikgrænseflade.\n"
-"\n"
-"   * 'LILO med tekstmenu': hvis du foretrækker LILO med tekstgrænseflade.\n"
-"\n"
-" * 'Opstartsenhed': I de fleste tilfælde vil det ikke være nødvendigt at "
-"ændre standard (/dev/hda), men hvis du foretrækker det, kan "
-"opstartsindlæseren installeres på det andet diskdrev (/dev/hdb), eller endda "
-"på en diskette (/dev/fd0).\n"
-"\n"
-" * 'Forsinkelse før opstart af standardsystem': Ved genstart af maskinen er "
-"dette den tid der gives til brugeren til at vælge en anden opstartsindgang "
-"end standard i opstartsindlæserens menu.\n"
-"\n"
-"Vær opmærksom på at hvis du vælger ikke at installere en opstartsindlæser "
-"(ved at vælge 'Annullér' hér), skal du være sikker på at du har en anden "
-"måde at starte dit Mandrake Linux-system op på! Vær også sikker på hvad du "
-"gør hvis du ændrer nogen af tilvalgene her!\n"
-"\n"
-"Et klik på 'Avanceret'-knappen i denne dialog vil tilbyde mange avancerede "
-"muligheder beregnet til ekspertbrugeren.\n"
-"\n"
-"Efter at du har konfigureret de generelle opstartsindlæserparametre, bliver "
-"du presenteret for listen af opstartsmuligheder som vil være tilstede ved "
-"opstarten.\n"
-"\n"
-"Hvis der er et andet operativsystem installeret på din maskine, vil det "
-"automatisk blive tilføjet til opstartsmenuen. Her kan du vælge at "
-"finindstille de eksisterende muligheder. Vælg en indgang og klik på 'Ændr' "
-"for at ændre eller fjerne den; 'Tilføj' opretter en ny indgang; og 'Færdig' "
-"fortsætter til det næste installationstrin."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOaderen) og GRUB er opstartsindlæsere: de kan starte enten GNU/"
-"Linux eller ethvert andet system op, som ligger på din maskine. Normalt "
-"bliver disse andre operativsystemer fundet korrekt og installeret. Hvis "
-"dette ikke er tilfældet, kan du lave en indgang i hånden med denne skærm. "
-"Vær omhyggelig med at vælge de korrekte parametre.\n"
-"\n"
-"Måske vil du ikke ønske at give nogensomhelst adgang til disse andre "
-"operativsystemer. I dette tilfælde kan du slette de tilsvarende indgange. "
-"Men så har du brug for en opstartsdiskette for at starte disse "
-"operativsystemer!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Det er nødvendigt at du angiver hvor du ønsker at placere oplysningerne\n"
-"krævet for at opstarte GNU/Linux.\n"
-"\n"
-"Med mindre du véd præcist hvad du gør, bør du vælge Første sektor på drevet\n"
-"(MBR)."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Her vælger vi et udskrivningssystem som din maskine skal bruge. Andre "
-"styresystemer tilbyder måske ét, men Mandrake tilbyder tre.\n"
-"\n"
-" * 'pdq' - som betyder 'print, don't queue' (udskriv, kø ej), er valget, "
-"hvis du har en direkte forbindelse til din printer, og du ønsker at kunne "
-"klare printproblemer med det samme, og du ikke har nogen printere via "
-"netværk. Det vil kun behandle meget simple netværkstilfælde, og er lidt "
-"sløvt på netværk. Vælg 'pdq' hvis dette er din jomfrurejse med GNU/Linux. Du "
-"kan ændre dit valg efter installeringen ved at køre PrinterDrake fra "
-"Mandrakes Kontrolcenter, og klikke på ekspert-knappen.\n"
-"\n"
-" * 'CUPS' - 'Common Unix Printing System' (Fælles printersystem for Unix) er "
-"fremragende til at udskrive på din lokale printer, og også på den, der står "
-"på den anden side af jordkloden. Det er simpelt, og kan virke som en server "
-"eller klient for det bedagede 'lpd'-printsystem, så det er kompatibelt med "
-"de tidligere systemer. Det kan mange finesser, men den basale opsætning er "
-"næsten lige så nem som for 'pdq'. Hvis du har brug for at dette efterligner "
-"en 'lpd'-server, skal du aktivere 'cups-lpd'-dæmonen. Det har grafiske "
-"grænseflader for udskrivning og valg af printermuligheder.\n"
-"\n"
-" * 'lprNG' - 'line printer daemon New Generation' (ny generation af "
-"linjeprinterdæmonen). Dette system kan gøre omtrent det samme som de andre, "
-"men det vil også kunne skrive til et Novell netværk, fordi det understøtter "
-"IPX-protokollen, og det kan udskrive direkte til skal-kommandoer. Hvis du "
-"har brug for Novell eller udskrivning til kommandoer uden at bruge en "
-"separat kanaliserings-konstruktion, så brug lprNG. Ellers er CUPS at "
-"foretrække, da det er simplere og bedre til at fungere over netværk."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX er nu ved at bestemme alle IDE-enheder der er tilstede på din maskine. "
-"Den vil også lede efter en eller flere PCI SCSI-kort på dit system. Hvis et "
-"SCSI-kort findes, vil DrakX automatisk installere en driver til det.\n"
-"\n"
-"Da maskineleftersøgningen nogen gange ikke vil finde et stykke udstyr, vil "
-"DrakX alligevel spørge dig om du har et SCSI-kort installeret i din maskine. "
-"Du vil blive præsenteret for en liste af SCSI-kort, som du kan vælge fra. "
-"Svar Nej hvis du ikke har noget SCSI-udstyr. Hvis du ikke er sikker, kan du "
-"også tjekke listen over udstyr i din maskine ved at vælge Se maskinelinfo og "
-"klikke O.k. Undersøg listen over udstyr og klik så på O.k.-knappen for at "
-"vende tilbage til spørgsmålet om SCSI-udstyr.\n"
-"\n"
-"Hvis du måtte angive din kort manuelt, vil DrakX spørge om du vil "
-"specificere nogle indstillingsmuligheder for den. Du bør dog lade DrakX "
-"spørge udstyret om opsætningen. Det virker som regel fint. \n"
-"Hvis DrakX ikke kan få oplysninger om indstillinger ud af udstyret, som skal "
-"bruges til opsætningen, skal du angive opsætningsinformation til driveren. "
-"Se i brugervejledningen (kapitel 3, underafsnit \"Collective informations on "
-"your hardware\") om hjælp med at finde informationen i maskinel-"
-"dokumentationen, fra fabrikantens side (hvis du har Internet adgang) eller "
-"fra Microsoft Windows (hvis du brugte dette udstyr med Windows på dit "
-"system)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan tilføje flere valgmuligheder for Yaboot, enten til andre "
-"styresystemer, andre kerner, eller til nød-opstart.\n"
-"\n"
-"For andre styresystemer består indgangen blot af et navn og rodpartitionen\n"
-"\n"
-"Der er for Linux nogen få valgmuligheder:\n"
-"\n"
-" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten "
-"fra Yaboot for at vælge denne opstartsmulighed.\n"
-"\n"
-" * Image: Dette vil være navnet på den kerne der skal opstartes. Typisk "
-"vmlinux eller en variation på vmlinux med en endelse.\n"
-"\n"
-" * Root: root enheden eller \"/\" for din Linux installation.\n"
-"\n"
-" * Append: på Apple udstyr bruges kerne-append muligheden ganske ofte til at "
-"hjælpe med initialisering af billedudstyr, eller til at aktivere emulering "
-"af museknapper for de ofte manglende knap 2 og knap 3 på musen på en typisk "
-"Apple mus. Det følgende er nogle eksempler:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: denne mulighed kan bruges enten til at indlæse de første moduler, "
-"før opstartsenheden er tilgængelig, eller til at indlæse en ramdisk ved "
-"opstart i en nødsituation.\n"
-"\n"
-" * Initrd-size: den almindelige størrelse på en ramdisk er generelt 4.096 "
-"byte. Hvis du har brug for at udlægge en stor ramdisk kan denne mulighed "
-"bruges.\n"
-"\n"
-" * Read-write: normalt bliver rod-partitionen først bragt op skrivebeskyttet "
-"for at muliggøre et filsystemstjek før systemet går i luften. Her kan du "
-"tilsidesætte denne opsætning.\n"
-"\n"
-" * NoVideo: skulle Apple-billedudstyret vise sig at være specielt "
-"problemfyldt kan du vælge denne mulighed for at starte op i 'novideo'-"
-"tilstand, med indbygget rammebufferunderstøttelse.\n"
-"\n"
-" * Default: vælger denne indgang som værende det normale Linux valg, som "
-"vælges bare ved at trykke RETUR ved yaboots ledetekst. Denne indgang vil "
-"også blive fremhævet med en '*', hvis du trykker Tab for at se "
-"opstartsvalgene."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en systemstarter til NewWorld MacIntosh-maskinel. Den kan starte "
-"enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede på din maskine. "
-"Sædvanligvis vil disse andre styresystemer blive korrekt opdaget og "
-"installeret. Hvis dette ikke skulle være tilfældet kan du her tilføje en "
-"indgang i hånden. Vær omhyggelig med at vælge de korrekte parametre.\n"
-"\n"
-"Yaboots hovedvalg er:\n"
-"\n"
-"  * Init-besked: En enkel tekstbesked som vises før valg af opstart.\n"
-"\n"
-"  * Opstartsenhed: Angiver hvor du ønsker at placere informationen som er "
-"nødvendig for at starte GNU/Linux. Du vil generelt have indstillet en "
-"bootstrap-partition tidligere til at have denne information.\n"
-"\n"
-"  * Open firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser "
-"mulige med yaboot. Den første forsinkelse bliver målt i sekunder og du kan "
-"ved det punkt vælge mellem CD, OF-opstart, MacOS eller Linux.\n"
-"\n"
-"  * Ventetid før kerneopstart: Denne er lig LILO-opstartsforsinkelsen. Efter "
-"at have valgt Linux vil du have denne ventetid gange 0,1 sekunder før din "
-"forvalgte kernebeskrivelse bliver valgt.\n"
-"\n"
-"  * Aktivér CD-opstart?: Hvis du vælger dette valg vil  du kunne trykke 'C' "
-"for CD ved det første opstartsvalg.\n"
-"\n"
-"  * Aktiver OF-opstart?: Hvis du vælger dette valg vil du kunne trykke 'N' "
-"for 'Open Firmware' ved det første opstartsvalg.\n"
-"\n"
-"  * Forvalgt styresystem: Du kan vælge hvilket forvalgt styresystem der skal "
-"startes når Open Firmwareforsinkelsen er udløbet."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Her præsenteres forskellige parametre relateret til din maskine. Afhængig af "
-"dit installerede maskinel vil - eller vil du ikke - se de følgende "
-"indgange:\n"
-"\n"
-" * 'Mus': tjek den aktuelle musekonfiguration og klik på knappen for om "
-"nødvendigt at ændre den.\n"
-"\n"
-" * 'Tastatur': tjek den aktuelle tastaturkonfiguration og klik på knappen "
-"for om nødvendigt at ændre den.\n"
-"\n"
-" * 'Tidszone': DrakX gætter normalt din tidszone fra det sprog, du har "
-"valgt. Men også her, som ved valg af tastatur, er du måske ikke i det land "
-"som dit sprog indikerer, så du har måske brug for at klikke på 'Tidszone'-"
-"knappen så du kan konfigurere uret svarende til den tidszone du er i.\n"
-"\n"
-" * 'Printer': Et klik på 'Ingen printer'-knappen vil åbne vejlederen for "
-"printerkonfigurering.\n"
-"\n"
-" * 'Lydkort': Hvis et lydkort er blevet fundet på dit system, vil det blive "
-"vist her. Ingen ændringer er mulige på installationstidspunktet.\n"
-"\n"
-" * 'Tv-kort': Hvis et tv-kort er blevet fundet på dit system, vil det blive "
-"vist her. Ingen ændringer er mulige på installationstidspunktet.\n"
-"\n"
-" * 'ISDN-kort': Hvis et ISDN-kort er blevet fundet på dit system, vil det "
-"blive vist her. Du kan klikke på knappen for at ændre de tilhørende "
-"parametre."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vælg det diskdrev som du vil slette for at installere din nye Mandrake Linux "
-"partition. Vær forsigtig, alle data som er på der, vil gå tabt og vil ikke "
-"kunne genskabes!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik på 'O.k.' hvis du ønsker at slette alle data og pertitioner der ligger "
-"på dette diskdrev. Vær omhyggelig, efter klik på O.k. vil du ikke være i "
-"stand til at redde nogen data eller partitioner, der ligger på dette "
-"diskdrev, inklusive alle Windows data.\n"
-"Klik på 'Annulér' for at anullere denne handling uden at tabe nogen data og "
-"partitioner der er tilstede på dette diskdrev."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kunne ikke få adgang til kernemoduler svarende til din kerne (fil %s "
-"mangler), dette betyder normalt at din opstartsdiskette ikke stemmer overens "
-"med installationsmediet (lav en nyere opstartsdiskette)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Du skal også formatere %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Du har valgt følgende servere: %s\n"
-"\n"
-"\n"
-"Disse servere er aktiveret som standard. De har ingen kendte "
-"sikkerhedsproblemer, men nogen nye kan blive fundet. I så tilfælde skal du "
-"opgradere så snart som mulig.\n"
-"\n"
-"\n"
-"Ønsker du virkelig at installere disse servere?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan ikke bruge rundkastning uden noget NIS-domæne"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Indsæt en tom diskette i diskette-drev %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Denne diskette er ikke formatteret til FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For at bruge dette gemte pakkevalg, start installationen op med``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fejl ved læsning af filen %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Noget maskinel på din maskine skal bruge ''proprietære'' drivere for at "
-"virke.\n"
-"Du kan finde information om dem hos: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du skal have en rod partition. For at få dette, lav en ny partition (eller "
-"vælg en eksisterende).\n"
-"Vælg så kommandoen \"Monterings-sti\" og sæt den til `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Du skal tildele en partition til Swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen Swap partition\n"
-"\n"
-"Fortsæt alligevel?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du skal have en FAT-partition monteret under /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Brug fri plads"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok fri plads til at tildele nye partitioner"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Brug eksisterende partition"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Der er ingen eksisterende partition der kan bruges"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Brug Windows partitionen til Loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partition vil du benytte som Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Vælg størrelserne"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Rod-partitions størrelse i Mb: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitions størrelse i Mb: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Brug den frie plads på Windows-partitionen"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partition ønsker du at ændre størrelse på?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Udregner Windows-filsystemets grænser"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Programmet til at ændre størrelse på FAT kan ikke behandle din partition, \n"
-"den følgende fejl opstod: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Din Windows partition er for fragmenteret, kør 'defrag' først"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil nu ændre størrelsen på din Windows-partition. Udvis forsigtighed: "
-"denne operation er farlig. Hvis du ikke allerede har gjort det, bør du først "
-"gå ud af denne installation,  køre scandisk under Windows (og eventuelt "
-"defrag) og så genstarte installationen. Du bør også tage en sikkerhedskopi "
-"af dine data. Tryk på Ok, hvis du er helt sikker."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Hvilken størrelse ønsker du at at beholde Windows på?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT størrelsesændring mislykkedes: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at ændre størrelse på, eller bruge som loopback "
-"(eller ikke nok plads tilbage)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Slet hele disken"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mere end et diskdrev, hvilken ønsker du at installere Linux på?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle eksisterende partitioner og deres data vil gå tabt på drev %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Brugerdefineret disk-opdeling"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Brug fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan nu partitionere %s.\n"
-"Når du er færdig, så husk at gemme med 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har ikke nok fri plads på din Windows-partition"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Kan ikke finde plads til installering"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partitionerings-vejlederen fandt de følgende løsninger:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislykkedes: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Bringer netværket op"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Lukker netværket ned"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Der opstod en fejl, men jeg ved ikke hvordan den kan håndteres på en\n"
-"pæn måde.\n"
-"Fortsæt på eget ansvar!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikér monterings-sti %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
-"Enten er dit cdrom-drev eller din cdrom fejlbehæftet.\n"
-"Tjek cdrom'en på en færdiginstalleret maskine ved brug af \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Intet tilgængeligt diskettedrev"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Går til trin `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Dit system har kun få resurser. Du kan få problemer med at installere\n"
-"Mandrake Linux. Hvis dette sker, kan du prøve en tekst-baseret installation "
-"i stedet\n"
-"Dette gøres ved at trykke 'F1' ved opstart fra cdrommen, og så skrive 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installationsmetode"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Vælg en af de følgende installations-måder:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totale størrelse af de grupper du har valg er cirka %d Mb.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Hvis du ønsker at installere mindre end denne størrelse,\n"
-"så vælg procentdelen af pakker som du vil installere.\n"
-"\n"
-"En lav procentdel vil kun installere de vigtigste pakker;\n"
-"en procentdel på 100%% vil installere alle valgte pakker."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Du har kun plads på din disk til %d%% af disse pakker.\n"
-"\n"
-"Hvis du ønsker at installere mindre end denne størrelse,\n"
-"så vælg procentdelen af pakker som du vil installere.\n"
-"En lav procentdel vil kun installere de vigtigste pakker;\n"
-"en procentdel på %d%% vil installere så mange pakker som muligt."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Du har mulighed for at vælge dem mere præcist i næste installationstrin"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procentandel pakker til installation"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Valg af pakkegrupper"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total størrelse: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Dårlig pakke"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Størrelse: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Vigtighed: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan ikke vælge denne pakke, da der ikke er nok plads tilbage til at "
-"installere den"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "De følgende pakker vil blive installeret"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "De følgende pakker vil blive afinstalleret"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke vælge/fravælge denne pakke"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en nødvendig pakke, den kan ikke vælges fra"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke fravælge denne pakke. Den er allerede installeret"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Denne pakke skal opgraderes\n"
-"Er du sikker på at du vil fravælge den?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke fravælge denne pakke. Den skal opgraderes"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installér"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Indlæs/gem på diskette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Opdaterer pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal installation"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Vælg pakker som skal installeres"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installerer"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Beregnes"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Resterende tid "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Vent venligst, forbereder installationen"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Acceptér"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Nægt"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Skift din cdrom!\n"
-"\n"
-"Indsæt cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk på Ok, når det "
-"gjort\n"
-"Hvis du ikke har den så tryk på Annullér, så undgås installation fra denne cd"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Fortsæt alligevel?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Advarsel\n"
-"\n"
-"Læs venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig i alt "
-"der står, må du ikke installere indholdet af CD-en. Tryk på 'Nægt'  for at "
-"fortsætte installationen uden disse cdrommer.\n"
-"\n"
-"\n"
-"Visse komponenter på den næste CD er ikke omfattet af GPL-licensen eller  "
-"andre lignende licenser. Hver enkelt komponent er derfor omfattet af  de "
-"betingelser der er beskrevet i dets egen licens.  Læs derfor venligst "
-"betingelserne omhyggeligt og følg de opstillede betingelser når du bruger og/"
-"eller videredistribuerer komponenterne. Sådanne licenser forhindrer normalt "
-"kopiering (sikkerhedskopiering undtaget),  videredistribuering, at folk "
-"skiller programmet ad, eller ændrer i komponenterne. Ethvert brud på "
-"licensen vil øjeblikkeligt fratage dig rettighederne beskrevet i den "
-"specifikke licens. Medmindre licensen giver dig lov hertil, vil det  normalt "
-"ikke være tilladt at installere programmet på mere end én maskine,  eller "
-"bruge det på et netværk. Hvis du er i tvivl, så kontakt venligst producenten "
-"af komponenten direkte. Overdragelse til tredjemand eller kopiering af "
-"sådanne komponenter inklusive  dokumentationen er normalt forbudt.\n"
-"\n"
-"\n"
-"Alle rettigheder til komponenterne på CD-en tilhører deres respektive "
-"skabere og er beskyttet af Lov om Ophavsret.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Der er opstået en fejl"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Ønsker du virkelig at forlade installationen?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licensaftale"
-
-# Mangler
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduktion\n"
-"\n"
-"Operativsystemet og de forskellige komponenter tilgængelige i Mandrake Linux "
-"distributionen  vil herefter blive kaldt \"programmelprodukter\". "
-"Programmelprodukterne inkluderer, men er ikke begrænset til: værktøjssættet, "
-"metoder, regler og dokumentation.\n"
-"\n"
-"\n"
-"1. Licensaftale\n"
-"\n"
-"Læs venligst dette dokument. Dette dokument er en licensaftale mellem dig "
-"og   MandrakeSoft S.A., som gælder til disse programmelprodukter. Ved at "
-"installere, kopiere eller bruge disse programmelprodukter accepterer du "
-"indirekte  og fuldt ud denne licensaftale med dens betingelser og regler. "
-"Hvis du er uenig i nogensomhelst del af denne licens, mister du retten til "
-"at installere, kopiere eller bruge  disse programmelprodukter.  Hvilket som "
-"helst forsøg på at installere, kopiere eller bruge disse programmelprodukter "
-"på en måde som ikke er i overensstemmelse  med betingelserne og reglerne i "
-"denne licens er ulovlig og vil betyde at du mister dine rettighedder under "
-"denne  licens. Hvis dette sker, skal du med det samme ødelægge alle kopier "
-"af disse  programmelprodukter.\n"
-"\n"
-"\n"
-"2. Begrænset garanti\n"
-"\n"
-"Disse programmelprodukter og dokumenter leveres \"som de er\", uden nogen "
-"form for garanti  efter som hvad lov foreskriver. MandrakeSoft S.A. vil "
-"under ingen omstændigheder undtagen hvad lov foreskriver være ansvarlig for "
-"specielle,  tilfældige, direkte eller indirekte tab af nogen art "
-"(inkluderende uden begrænsninger, skader ved tab af  forretning, "
-"forstyrrelser af forretning, finansielle tab, advokatbistand, erstatninger "
-"som resultat af en retssag  eller nogen anden form for tab) opstået under "
-"brugen af disse programmelprodukter eller  mangel på samme, selv hvis "
-"MandrakeSoft S.A. er blevet gjort opmærksom på mulighed for sådanne  "
-"skader.\n"
-"\n"
-"BEGRÆNSET GARANTI MED HENSYN TIL REGLER OM BRUG AF FORBUDT PROGRAMMEL I "
-"VISSE LANDE\n"
-"\n"
-"Udover hvad lov foreskriver vil MandrakeSoft S.A. eller deres distributører "
-"under ingen omstændigheder være  ansvarlig for tilfældige, direkte eller "
-"indirekte tab af nogen art (inkluderende uden begrænsninger skader ved tab "
-"af  forretning, forstyrrelser af forretning, finansielle tab, "
-"advokatbistand, erstatninger som resultat af en retssag  eller nogen anden "
-"form for tab) opstået under hentning eller brugen af dette programmel fra "
-"Mandrake Linux websider som er forbudt i visse lande ved lov. Denne "
-"begrænsede garanti gælder, men er ikke begrænset til, de stærke "
-"krypteringskomponenter  inkluderet i disse programmelprodukter.\n"
-"\n"
-"\n"
-"3. GPL-licensen og relaterede licenser. \n"
-"\n"
-"Dette programmel består af komponenter lavet af forskellige personer. De "
-"fleste af disse komponenter bliver reguleret efter vilkårene og aftalerne i "
-"GNU General Public License, herefter kaldet \"GPL\", eller lignende "
-"licenser. De fleste af disse licenser tillader dig at bruge, kopiere, "
-"tilpasse eller redistribuere komponenterne, de dækker. Læs venligst "
-"vilkårene og aftalerne i licensaftalen for hver komponent før du bruger det. "
-"Spørgsmål angående en komponent bedes adresseret til komponentens forfatter "
-"og ikke til MandrakeSoft. Programmerne udviklet af MandrakeSoft S.A. bliver "
-"reguleret efter GPL-licensen. Dokumentationen skrevet af MandrakeSoft S.A. "
-"bliver reguleret efter en specifik licens. Referér venligst til "
-"dokumentationen for yderligere detaljer.\n"
-"\n"
-"\n"
-"4. Intellektuelle rettigheder \n"
-"\n"
-"Alle rettigheder til komponenterne i programmelproduktet tilhører deres "
-"respektive forfattere, og er beskyttet af intellektuelle rettigheds- og "
-"ophavsretslove, gældende for programmel. MandrakeSoft S.A. forbeholder sine "
-"rettigheder til at ændre eller tilpasse programmelprodukterne, helt eller "
-"delvist, med alle midler og til alle formål. \"Mandrake\", \"Mandrake Linux"
-"\" samt de tilhørende logoer er varemærker for MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Gældende love \n"
-"\n"
-"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
-"en domstolsafgørelse,  vil disse dele blive ekskluderet fra denne kontrakt. "
-"Du vil forblive bundet af de andre gældende dele af aftalen. Vilkårene og "
-"aftalerne i denne licens er reguleret under fransk lov. Alle uenigheder "
-"vedrørende vilkårene i denne licens vil fortrinsvist blive løst udenfor "
-"domstolene. Som en sidste udvej vil uenighederne blive håndteret ved den "
-"rette domstol i Paris, Frankrig. Ved spørgsmål omkring dette dokument, "
-"kontakt venligst MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Vælg dit tastaturlayout."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette liste over tilgængelige tastaturer"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hvilken installations-klasse ønsker du?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installér/Opdatér"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Er dette en nyinstallation eller en opdatering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Anbefalet"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Opgradering"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Opgradér kun pakker"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Vælg muse-type."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muse-port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Vælg hvilken seriel port din mus er forbundet til."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulering af knapper"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulering af knap 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulering af knap 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ingen ledige partitioner"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partitioner for at finde monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Vælg monterings-stierne"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Jeg kan ikke læse din partitionstabel, den er for ødelagt for mig :( Jeg kan "
-"forsøge fortsat at udblanke dårlige partitioner, ALLE DATA vil gå tabt. Den "
-"anden mulighed er at forbyde DrakX at ændre partitionstabellen. (fejlen er %"
-"s)\n"
-"\n"
-"Er du indforstået med at ødelægge alle partitionerne?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kunne ikke læse partitionstabellen korrekt. Fortsæt på eget ansvar!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plads for 1 MB bootstrap! Installationen vil fortsætte, men for "
-"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen rodpartition fundet til opgradering"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rod-partition"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Hvilken partition indeholder systemets rod-partition (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du skal genstarte for at aktivere ændringerne i partitionstabellen"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Vælg partitioner der skal formateres"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Led efter beskadigede blokke?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formaterer partitioner"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Opretter og formaterer fil %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ikke nok swap-plads til at gennemføre installationen, tilføj mere"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Leder efter tilgængelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Leder efter pakker som skal opgraderes"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Dit system har ikke nok plads tilbage til en installation eller opgradering "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Alting (%dMb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Anbefalet (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vælg indlæs eller gem pakkevalg på diskette.\n"
-"Formatet er det samme som for auto_install-genererede disketter."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Indlæs fra diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Indlæser fra diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Valg af pakker"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Indsæt en diskette med pakkevalget"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gem på diskette"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Valgt størrelse er større end tilgængelig plads"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Installationstype"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har ikke valgt nogen gruppe af pakker.\n"
-"Vælg den minimale installation du ønsker"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Med X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Med basal dokumentation (anbefalet!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Virkelig minimal installation (specielt ingen urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
-"Hvis du ikke har nogen af disse cd'er, klik Annullér.\n"
-"Hvis kun nogen cd'er mangler, fravælg dem, og klik så Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cdrom med etikette '%s'"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Forbereder installationen"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfiguration efter installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Indsæt opstartsdisketten i diskette-drevet %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Indsæt Opdater moduler-disketten i drev %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har nu mulighed for at nedlæse programmel, der bruger kryptering.\n"
-"\n"
-"ADVARSEL:\n"
-"\n"
-"Grundet forskellige krav til programmel der bruger kryptering, og påtvunget "
-"af forskellige lokale lovområder, bør kunder og/eller slutbrugere af dette "
-"programmel sikre sig at lokale love fra dit/jeres lokalområde tillader dig/"
-"jer at nedlæse, gemme og/eller bruge dette programmel.\n"
-"\n"
-"Derudover skal kunder og/eller slutbrugere være opmærksomme på ikke at bryde "
-"lokale love fra dit/jeres lokalområde. Skulle en kunde og/eller slutbruger "
-"ikke respektere det lokale områdes love, vil han/de blive udsat for seriøse "
-"sanktioner.\n"
-"\n"
-"Under ingen omstændigheder kan Mandrakesoft eller deres producenter og/eller "
-"leverandører holdes ansvarlig for speciel, indirekte eller tilfældig skade "
-"(inkluderet, men ikke begrænset til tab af overskud, forretningsafbrydelser, "
-"tab af kommercielle data og andre pekuniære tab, eventuelle risici og "
-"erstatninger der skal betales i overensstemmelse med retlig beslutning) som "
-"følge af brug, besiddelse eller nedlæsning af dette programmel, som kunder "
-"og/eller slutbrugere kunne få adgang til efter at have accepteret denne "
-"aftale.\n"
-"\n"
-"\n"
-"For spørgsmål om denne aftale, vær venlig at kontakte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Du har nu mulighed for at hente opdaterede pakker som er blevet udgivet\n"
-"efter distributionen blev gjort tilgængelig.\n"
-"\n"
-"Du vil få sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
-"internet-opkobling for at fortsætte.\n"
-"\n"
-"Ønsker du at installere opdateringerne?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontakter Mandrake Linux netsted for at hente listen over tilgængelige spejle"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Vælg det spejl hvorfra pakkerne skal hentes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontakter spejlet for at hente listen af tilgængelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Hvad er din tidszone?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Maskin-ur sat til GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hjælp af NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Ekstern CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ingen printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Har du et ISA-lydkort?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Kør \"sndconfig\" efter installation for at konfigurere dit lydkort"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Intet lydkort genkendt. Prøv at køre  \"harddrake\" efter installation"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Oversigt"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tidszone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Lydkort"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokale filer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Sæt root-adgangskode"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ingen adgangskode"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dette kodeord er for nemt at gætte (det skal mindst være på %d tegn)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Identifikation"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentificering LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP grundlæggende dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentificering NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-domæne"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
-"være afhængig af den normale opstarter. Det kan være nyttigt, hvis du ikke "
-"vil installere SILO på dit system - eller hvis et andet operativsystem "
-"fjerner SILO, eller hvis SILO ikke virker med dit maskinel. En tilpasset "
-"opstartsdiskette kan også bruges sammen med Mandrakes `rescue image', "
-"hvilket gør det meget nemmere at reparere systemet i tilfælde af "
-"systemnedbrud.\n"
-"\n"
-"Hvis du ønsker at lave en opstartsdiskette til dit system, indsæt en "
-"diskette i dit første diskettedrev og tryk 'Ok'."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Første diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Andet diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Spring over"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at være "
-"afhængig af den normale opstarter. Det kan være nyttigt, hvis du ikke vil "
-"installere LILO (eller grub) på dit system - eller hvis et andet "
-"operativsystem fjerner LILO, eller hvis LILO ikke virker med din hardware. "
-"En tilpasset opstartsdiskette kan også bruges sammen med Mandrakes `rescue "
-"image', hvilket gør det meget nemmere at reparere systemet i tilfælde af "
-"systemnedbrud. \n"
-"Vil du lave en opstartsdiskette til dit system?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ADVARSEL! Du bruger XFS til din root-partition,\n"
-"oprettelse af en opstartsdiskette på en 1.44 Mb diskette vil formentlig\n"
-"mislykkes, fordi XFS kræver en meget stor driver)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Der er desværre ikke noget tilgængeligt diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Vælg det diskette-drev, du vil benytte til at lave boot-disketten"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Indsæt en diskette i %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Oprette opstartsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Forbereder opstarter"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Det virker som om du har en OldWorld eller ukendt maskine, yaboot "
-"opstartsindlæseren vil ikke virke for dig. Installationen vil fortsætte, men "
-"du skal bruge BootX for at starte din maskine."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ønsker du at bruge aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fejl ved installation af aboot, \n"
-"forsøg at gennemtvinge installation selv om dette kan ødelægge den første "
-"partition?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Installerer systemopstarter"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installation af opstarter mislykkedes. Den følgende fejl opstod:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du behøver måske at ændre din Åben Firmware opstartsenhed for  at slå "
-"systemstarteren til. Hvis du ikke ser systemstarter-beskeden ved genstart, "
-"så hold Command-Option-O-F nede og indtast:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv så: shut-down\n"
-"Ved næste opstart burde du se systemstarteren."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Indsæt en tom diskette i drev %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nogen dele af installationen er ikke færdig\n"
-"\n"
-"Er du sikker på du ønsker du at lukke nu?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Tillykke, installationen er færdig.\n"
-"Fjern boot-mediet og tryk retur for at genstarte.\n"
-"\n"
-"\n"
-"For information om rettelser til denne udgivelse af Mandrake Linux, se "
-"Errata på:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information om konfigurering af dit system kan du finde i kapitlet om efter-"
-"installation i den Officielle Mandrake Linux Brugervejledning."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Autoinstallation kan ske fuldautomatisk hvis ønsket. I så tilfælde vil den "
-"overtage hele harddisken!! (dette er beregnet til at installere på en anden "
-"maskine).\n"
-"\n"
-"Du foretrækker måske at afspille installationen igen\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatisk"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Afspil igen"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gem pakke-valg"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellem elementer  | <Space> vælger  | <F12> næste skærm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mangler"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "konsolhjælper mangler"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Vælg en fil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanceret"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Basal"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Vent venligst"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Udvid træ"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sammenfold træ"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellem flad og gruppesorteret"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dårligt valg, prøv igen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Dit valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Indgange som du skal udfylde:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Dit valg? (0/1, standard '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Knap '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Ønsker du at klikke på denne knap?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Dit valg? (standard '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Der er mange ting at vælge imellem (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vælg det første tal i 10-området som du ønsker at redigere,\n"
-"Eller tryk retur for at fortsætte.\n"
-"Dit valg? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Bemærk, en etikette ændredes:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Indsend igen"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tjekkisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Tysk"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spansk"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finsk"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Fransk"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norsk"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polsk"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russisk"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Svensk"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Britisk"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Amerikansk"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albansk"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskine)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armensk (fonetisk)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidiansk (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgisk"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarsk (fonetisk)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarsk (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Hviderussisk"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Schweizisk (Tysk layout)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Schweizisk (Fransk layout)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tjekkisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen døde taster)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dansk"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norsk)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (svensk)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estisk"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (russisk layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (Latin layout)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Græsk"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungarsk"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatisk"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelsk"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Fonetisk)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iransk"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandsk"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiensk"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinamerikansk"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauisk AZERTY (gammel)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauisk AZERTY (ny)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"talrække\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"fonetisk\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettisk"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonisk"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandsk"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (polsk layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (polsk layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugisisk"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Québec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Russisk (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Russisk (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovensk"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbisk (kyrillisk)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailandsk"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik tastatur"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (traditionel \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainsk"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Amerikansk (internaltionalt)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"talrække\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavisk (latinsk)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Højre alt-tast"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Begge taster samtidigt"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol- og skiftetaster samtidigt"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock-tast"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- og alt-taster samtidigt"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift-taster samtidigt"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "'Menu'-tast"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Venstre Windows-tast"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Højre Windows-tast"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkulære monteringer %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske delarkiver først\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA-understøttelse eksisterer ikke længere for 2.2-kerner. Brug en 2.4-"
-"kerne."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun-mus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standard PS2 mus med hjul"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking-mus"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knap"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Standard 2-knaps mus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriel"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Standard 3-knaps mus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serien (seriel)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serien"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mus (seriel, gammel C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Busmus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knapper"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knapper"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ingenting"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Test musen"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "For at aktivere musen,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "FLYT PÅ HJULET!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Afslut"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Næste ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Forrige"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Er dette korrekt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Lav forbindelse til Internettet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Den mest almindelige måde at forbinde med ADSL er pppoe.\n"
-"Nogen forbindelser bruger pptp, og nogle få bruger DHCP.\n"
-"Hvis du ikke ved noget, vælg 'brug pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "brug dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "brug pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "brug pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hvilken DHCP klient ønsker du at bruge?\n"
-"Standard er dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Der blev ikke fundet nogen ethernet netværksadapter på dit system.\n"
-"Kan ikke sætte denne forbindelsetype op."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Vælg netværksgrænsesnit"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vælg hvilken netværksadapter du ønsker at bruge til at lave forbindelse til "
-"Internettet med."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "kunne ikke finde noget netkort"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurerer netværk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Indtast dit værtsnavn hvis du kender det.\n"
-"Nogle DHCP-servere kræver værtsnavnet for at fungere.\n"
-"Dit værtsnavn bør være et fuldt kvalificeret værtsnavn,\n"
-"fx 'minpc.mitfirma.dk'."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Værtsnavn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Konfigurér netværk"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Hvad slags type er din ISDN-forbindelse?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hvilken ISDN-konfigurering foretrækker du?\n"
-"\n"
-"* Den gamle konfiguration bruger isdn4net. Det har stærke\n"
-"  værktøjer, men det er vanskeligt at konfigurere for en nybegynder,\n"
-"  og er ikke standardbaseret.\n"
-"\n"
-"' Det nye konfigurationsværktøj er enklere at forstå,\n"
-"  mere standardiseret, men med færre værktøjer.\n"
-"\n"
-"Vi anbefaler den nye konfiguration.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Gammel konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfiguration"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vælg din udbyder.\n"
-" Hvis de ikke er i listen, vælg Ikke listet"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europaprotokollen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokol for Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol for resten af verden"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol for resten af verden \n"
-" ingen D-kanal (lejet linje)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Hvilken protokol ønsker du at bruge?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Hvad slags kort har du?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Det ved jeg ikke"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Hvis du har et ISA kort burde værdiene i næste billede være rigtige.\n"
-"\n"
-"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Afbryd"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortsæt"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Hvilket er dit ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. Vælg et PCI-"
-"kort i næste skærmbillede."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort fundet. Vælg ét i næste skærmbillede."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Angiv hvilken seriel port dit modem er forbundet til."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opkaldsindstillinger"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Navn på forbindelsen"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Brugernavn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript-baseret"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-baseret"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domænenavn"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Første DNS-server (valgfri)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Anden DNS-server (valgfri)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
-"forbindelse."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan genkonfigurere din forbindelse"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Du har forbindelse til Internettet nu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lave forbindelse til Internettet eller omkonfigurere din forbindelse."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Du er ikke forbundet til Internettet nu."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Tilslut"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Afbryd"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfigurér forbindelsen"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetforbindelse & -konfiguration"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nu konfigurere opkoblingen '%s'."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal nu konfigurere opkoblingen '%s'.\n"
-"\n"
-"\n"
-"Tryk OK for at begynde."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigurér netværk"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da du er i gang med en netværksinstallation er dit netværk allerede "
-"konfigureret.\n"
-"Klik OK for at beholde din konfiguration, eller annullér for at "
-"omkonfigurere din Internet- og netværksforbindelse.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til Netværkskonfigurations-vejlederen\n"
-"\n"
-"Vi skal til at konfigurere din internet- eller netværksforbindelse.\n"
-"Hvis du ikke ønsker at bruge autodetektering, så fravælg afkrydsningsboksen\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Vælg profilen der skal konfigureres"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Brug automatisk detektion"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detekterer enheder..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normal modemforbindelse"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "Detekteret på port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-forbindelse"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "Detekteret %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL opkobling"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "Detekteret på grænseflade %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelforbindelse"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabelopkobling detekteret"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Lokalnet-konfiguration"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet-kort detekteret"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Vælg den opkobling, du ønsker at konfigurere"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigureret flere måder at koble dig mod internet på.\n"
-"Venligst vælg den du ønsker at bruger.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet opkobling"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Ønsker du at starte din forbindelse ved opstart?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netværks konfiguration"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Netværket skal startes op igen"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Et problem opstod ved genstart af netværket: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Tillykke, netværks- og internetkonfigurationen er færdig.\n"
-"Konfigurationen vil nu blive anvendt på dit system.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Derefter anbefaler vi at du genstarter dit X-miljø for\n"
-"at undgå problemer med det ændrede værtsnavn"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Problemer indtraf under konfigurationen.\n"
-"Afprøv din forbindelse med net_monitor eller mcc. Hvis din forbindelse ikke "
-"virker, kan du prøve at genstarte konfigurationen."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
-"forbindelse til Internettet.\n"
-"Ved kun at trykke på OK beholder du den nuværende konfiguration.\n"
-"Ændringer i felterne nedenunder vil overskrive denne konfiguration."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
-"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer netværksenheden %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (drivprogram %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adresse"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmaske"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatisk IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresse skal have formatet 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Indtast domænenavn, værtsnavn og IP adressen for evt. ekstra navne-servere.\n"
-"Dit værtsnavn skal være et fuldt kvalificeret værtsnavn inklusive domæne,\n"
-"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
-"så lad navne-server-felterne være blanke."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (fx %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway enhed"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfiguration af mellemvært (proxy)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Følg id for netværkskort (nyttigt for bærbare)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy skal være http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy skal være ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet-konfiguration"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ønsker du at forsøge at skabe forbindelse til Internettet nu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Tester din forbindelse..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Systemet er ikke forbundet til Internettet nu."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Det lader ikke til at dit system har forbindelse til Internettet.\n"
-"Prøv at omkonfigurere din forbindelse."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Forbindelses-konfiguration"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Udfyld eller markér feltet nedenunder"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kort IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kort IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kort IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Dit personlige telefonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Navn på udbyder (f.eks. udbyder.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Udbyders telefonnummer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Udbyder DNS 1 (valgfri)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Udbyder DNS 2 (valgfri)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Vælg dit land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Opringningsmåde"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Opkoblingshastighed"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Opkoblingens tidsudløb (i sekunder)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konto-login (brugernavn)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Kodeord for konto"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montering mislykkedes: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Udvidet partition ikke understøttet på denne platform"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
-"Den eneste løsning er at flytte dine primære partitioner, således at\n"
-"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Genskabning fra fil %s mislykkedes: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fejl i sikkerhedskopien"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fejl ved skrivning til fil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Noget slemt sker på dit drev. \n"
-"En test for at tjekke integriteten af data er mislykkedes. \n"
-"Dette betyder at alt på disken vil ende som tilfældigt snavs"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "skal have"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vigtigt"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "meget rart"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "rart"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "måske"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Dæmon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokal printer"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Ekstern printer"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer på ekstern CUPS server"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer på ekstern lpd server"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Netværksprinter (TCP/sokkel)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer på SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer på en NetWare server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Indtast en printerenheds-URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "kanalisér opgave ind i kommando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Ukendt model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale printere"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Eksterne printere"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " på parallelport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB printer \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multi-funktions-enhed på parallel port \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multi-funktions-enhed på USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-funktions-enhed på HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multi-funktions-enhed"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", skriver til %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "på LPD-server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP vært \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "på Windows-server \"%s\", deling \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "på Novell-server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", med kommando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Rå printer (ingen driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(på %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(på denne maskine)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "På CUPS-server '%s'"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Forvalgt)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Vælg printer-forbindelse"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvordan er printeren tilsluttet?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Eksterne CUPS-servere behøver du ikke at konfigurere her: \n"
-"disse printere vil automatisk blive fundet."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS-Konfiguration"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Angiv CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Du behøver ikke at konfigurere nogen printere hér for at få adgang til "
-"eksterne CUPS-servere; CUPS-serverne informerer automatisk din maskine "
-"information om deres printere. Alle printere som for øjeblikket er kendt af "
-"din maskine vil være opført under \"Eksterne printere\". Når CUPS-serveren "
-"ikke er på dit lokalnetværk skal du opgive CUPS-serverens IP-adresse og "
-"eventuelle portnummer for at få printerinformation fra serveren, ellers kan "
-"du lade disse felter være blanke."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalt bliver CUPS konfigureret automatisk i overensstemmelse med dit "
-"netværksmiljø, så du kan få fat i printerne på CUPS-serverne på dit "
-"lokalnetværk. Hvis dette ikke virker ordentligt, så deaktivér 'Automatisk "
-"CUPS-konfiguration' og redigér din fil /etc/cups/cupsd.conf selv. Glem ikke "
-"at genstarte CUPS bagefter. (kommando: 'service cups restart')."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adressen bør se ud som 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Port-nummeret bør være et heltal!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-serverens IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatisk CUPS-konfiguration"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Søger efter enheder..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Afprøv porte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Tilføj en ny printer"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Velkommen til vejlederen for printeropsætning\n"
-"\n"
-"Denne vejleder lader dig installere lokale eller eksterne printere som skal "
-"bruges fra denne maskine, og også fra andre maskiner i netværket.\n"
-"\n"
-"Den spørger dig om alle nødvendige oplysninger til at opsætte printere og "
-"giver dig adgang til alle tilgængelige printerdrivere, drivermuligheder og "
-"opkoblingstyper for printere."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokal printer"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Velkommen til vejlederen for printeropsætning\n"
-"\n"
-"Denne vejleder vil hjælpe dig med at installere dine printere tilsluttet "
-"denne maskine.\n"
-"\n"
-"Tilslut dine printere til maskinen og tænd dem. Klik på \"Næste\" når du er "
-"klar, eller på \"Annullér\" hvis du ikke vil opsætte dine printere nu.\n"
-"\n"
-"Bemærk at nogen maskiner kan gå ned under den automatiske søgning efter "
-"printere; slå 'Auto-opdagelse af printere' fra for at lave en printer "
-"installation uden auto-søgning. Brug printerdrakes 'Ekspert-udgave' hvis du "
-"ønsker at opsætte udskrift på en ekstern printer og Printerdrake ikke lister "
-"denne automatisk."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Auto-opdagelse af printere"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Tillykke, din printer er nu installeret og konfigureret!\n"
-"\n"
-"Du kan udskrive med 'Udskriv'-kommandoen i dit program (normalt i 'Filer'-"
-"menuen).\n"
-"\n"
-"Hvis du ønsker at tilføje, fjerne eller omdøbe en printer, eller hvis du "
-"ønsker at ændre på standard-indstillingerne (papirbakke, printkvalitet ...), "
-"så vælg 'Printer' i 'Udstyr'-afsnittet i Mandrake Kontrolcentret."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Auto-opdagelse af printere"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake er i stand til at automatisk opdage dine lokalt forbundne "
-"parallelle og USB-printere for dig, men bemærk at på nogen systemer KAN DEN "
-"AUTOMATISKE OPDAGELSE FRYSE DIT SYSTEM OG ENDOG ØDELÆGGE DINE FILSYSTEMER! "
-"Så gør det på EGET ANSVAR!\n"
-"\n"
-"Ønsker du virkeligt at få dine printere automatisk opdaget?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Udfør automatisk detektion"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Opsæt printer manuelt"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Fandt %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer på parallel port \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-printer \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ingen lokal printer fundet! For at installere en printer i hånden skal du "
-"indtaste et enhedsnavn/filnavn i inddatalinjen (parallelporte: /dev/lp0, /"
-"dev/lp1  ..., svarende til LPT1:, LPT2: ..., første USB-printer: /dev/usb/"
-"lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Du skal indtaste en enhed eller et filnavn!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ingen lokal printer fundet!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Netværksprintere kan kun installeres efter installeringen. Vælg 'Udstyr' og "
-"dernæst 'Printer' i Mandrake kontrolcentret."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"For at installere netværksprintere skal du klikke på 'Annullér', skifte til "
-"'Ekspert-version' og klikke på 'Tilføj en ny printer' igen."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Den følgende printer blev opdaget automatisk. Hvis det ikke er den du ønsker "
-"at opsætte så indtast et enhedsnavn/filnavn på inddatalinjen"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Her er en liste over alle automatisk opdagede printere. Vælg den printer du "
-"ønsker at opsætte eller indtast et enhedsnavn/filnavn på inddatalinjen"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Den følgende printer blev opdaget automatisk. Konfigurationen af printeren "
-"vil ske fuldstændigt automatisk. Hvis din printer ikke blev fundet korrekt "
-"eller hvis du foretrækker en tilpasset printerkonfiguration, så slå 'Manuel "
-"konfiguration' til."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Her er en liste over alle automatisk opdagede printere. Vælg den printer du "
-"ønsker at opsætte. Konfigurationen af printeren vil ske fuldstændigt "
-"automatisk. Hvis din printer ikke blev fundet korrekt eller hvis du "
-"foretrækker en tilpasset printerkonfiguration, så slå 'Manuel konfiguration' "
-"til."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Angiv hvilken port din printer er forbundet til eller indtast et enhedsnavn/"
-"filnavn på inddatalinjen"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Angiv hvilken port din printer er forbundet til."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(parallelporte: /dev/lp0, /dev/lp1  ..., svarende til LPT1:, LPT2: ..., "
-"første USB-printer: /dev/usb/lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Du skal vælge eller indtaste en printer/enhed!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuel konfiguration"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Er din printer en multi-funktionsenhed fra HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 med skanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installerer HPOJ-pakke..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Tjekker enhed og konfigurerer HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installerer SANE-pakke..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skanner på din HP multi-funktionsenhed"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Gør printerport tilgængelig for CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Læser database over printere ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Parametre til ekstern lpd"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"For at bruge en ekstern printer, skal du opgive værtsnavnet\n"
-"for printerserveren og navnet på printeren på denne server."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Eksternt værtsnavn"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Eksternt printernavn"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Eksternt værtsnavn mangler"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Det eksterne værtsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"For at skrive til en SMB printer skal du angive værtsnavnet på SMB maskinen "
-"(bemærk at dette navn kan være forskelligt fra TCP/IP-navnet!) og muligvis "
-"IP-adressen på printerserveren, så vel som delenavnet for printeren du vil "
-"bruge samt nødvendig information om brugernavn, adgangskode og arbejdsgruppe."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-servervært"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-serverens IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Dele-navn"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Arbejdsgruppe"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Enten servernavnet eller serverens IP skal angives!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba-delenavn mangler!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "SIKKERHEDSADVARSEL!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Du er ved at opsætte udskrivning til en Windows-konto med adgangskode. "
-"Grundet en fejl i arkitekturen af Sambas klientprogrammel bliver "
-"adgangskoden lagt i klar tekst i Samba-klientens kommandolinje, som bruges "
-"til at sende printjobbet til Windows-serveren. Så det er muligt for enhver "
-"bruger på denne maskine at vise adgangskoden på skærmen ved at angive "
-"kommandoer som 'ps auxwww'.\n"
-"\n"
-"Vi anbefaler at bruge en af de følgende alternativer (i alle tilfælde skal "
-"du forsikre dig om at kun maskiner fra dit lokalnetværk har adgang til din "
-"Windows-server, for eksempel ved hjælp af en brandmur):\n"
-"\n"
-"Brug en konto uden adgangskode på din Windows-server, såsom 'GUEST'-kontoen "
-"eller en speciel konto som kun anvendes til udskrift. Fjern ikke "
-"adgangskodebeskyttelsen fra en personlig konto eller en administrator-"
-"konto.\n"
-"\n"
-"Opsæt din Windows-server så printeren er tilgængelig under LPD-protokollen. "
-"Opsæt dernæst udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Opsæt din Windows-server til at gøre printeren tilgængelig under IPP-"
-"protokollen, og opsæt udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Forbind din printer til en Linux-server og lad dine Windows-maskiner "
-"tilslutte sig til den som klienter.\n"
-"\n"
-"Ønsker du virkelig at fortsætte med at opsætte din printer som du gør nu?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare printer-parametre"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"For at skrive til en NetWare printer skal du angive navnet på NetWare "
-"printerserveren (bemærk at dette navn kan være forskelligt fra TCP/IP-"
-"navnet!) såvel som kønavnet for den printer du vil benytte samt om "
-"nødvendigt et brugernavn og en adgangskode."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printer-server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Printerkø-navn"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-servernavn mangler!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-kønavn mangler!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Sokkel-printer-parametre"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"For at skrive til en TCP eller sokkel-printer skal du angive værtsnavnet på "
-"printeren, og eventuelt portnummer. På HP JetDirect-servere er portnummeret "
-"normalt 9100, på andre servere varierer det. Tjek manualen for dit udstyr."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "printer-værtsnavn"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "printer-værtsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printer-enheds URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte opgive URI til printeren. URIen skal være i henhold til enten "
-"CUPS- eller Foomatic-standarden. Bemærk at ikke alle typer URIer "
-"understøttes af alle kø-behandlere."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI skal opgives!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Alle printere behøver et navn (f.eks. 'printer').\n"
-"Beskrivelsen og lokaliseringsfelterne behøver ikke \n"
-"udfyldes. De er kommentarer til brugerne."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Navn på printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beskrivelse"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Placering"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Forbereder printerdatabase: ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Din printermodel"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake har sammenlignet modelnavnet fra den automatiske genkendelse af "
-"printeren med modellerne listet i dens printerdatabase for at finde den "
-"bedste match. Dette valg kan være forkert, især når din printer slet ikke er "
-"listet i databasen. Så tjek om valget er korrekt og klik \"Modellen er "
-"korrekt\" hvis den er, og hvis ikke så klik \"Vælg model manuelt\" så du kan "
-"udvælge din printermodel manuelt på den næste skærm.\n"
-"\n"
-"Som din printer har Printerdrake fundet:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Modellen er korrekt"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Vælg model manuelt"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Valg af printermodel"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Hvilken printermodel har du?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Tjek venligst om Printerdrake udførte \n"
-"autodetekteringen af din printermodel\n"
-"korrekt. Opsøg den korrekte model i listen\n"
-"når markøren står på en forkert model, eller\n"
-"på 'Rå printer'."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Hvis din printer ikke er listet, så vælg en kompatibel (se printermanual) "
-"eller en lignende printer."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI konfiguration af winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Du konfigurerer en OKI laser-winprinter. Disse printere bruger en meget "
-"speciel kommunikationsprotokol og derfor virker de kun når de er forbundet "
-"til den første parallelle port. Når din printer er forbundet til en anden "
-"port eller til en printserverboks, så forbind printeren til den første "
-"parallelle port før du udskriver en prøveside. Ellers vil printeren ikke "
-"virke. Din opsætning af forbindelsestype vil blive ignoreret af driveren."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguration"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Printerdriverne til inkjet som leveres af Lexmark understøtter kun lokale "
-"printere, ikke printere på eksterne maskiner eller printserverbokse. Forbind "
-"din printer til en lokal port eller konfigurér den på den maskine, den er "
-"forbundet til."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"For at kunne udskrive på din Lexmark inkjet fra denne konfigurering skal du "
-"bruge inkjet printerdriverne leveret af Lexmark (http://www.lexmark.com/). "
-"Gå til webstedet i USA og klik på 'Drivers'-knappen. Vælg så din model og "
-"derefter 'Linux' som operativsystem. Driverne kommer som RPM-pakker eller "
-"skal-skripter med interaktiv grafisk installation. Du behøver ikke lave "
-"denne konfiguration via de grafiske grænseflader. Annullér direkte efter "
-"licensaftalen. Udskriv derefter justeringsider for skrivehovedet med "
-"'lexmarkmaintain', og justér opsætningen af justeringen af hovedet med dette "
-"program."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standardprinterens indstillinger\n"
-"\n"
-"Du bør tjekke at sidestørrelsen og blæktypen/udskriftstilstanden (hvis til "
-"stede) og også konfigurationen af laserprinterudstyr (hukommelse, duplex-"
-"enhed, ekstra bakker) er sat rigtigt. Bemærk at en meget god "
-"udskriftskvalitet kan gøre udskriften betydeligt langsommere."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s skal være et helt tal!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s skal være et tal!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er udenfor område!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ønsker du fremover at bruge printeren \"%s\"\n"
-"som standard?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testsider"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vælg testsiderne du ønsker at udskrive.\n"
-"Bemærk: fototestsiden kan tage ret lang tid at skrive ud, og på "
-"laserprintere med for lidt hukommelse vil den måske ikke skrives ud i det "
-"hele taget. Som regel vil det være nok at udskrive standard-testsiden."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Ingen testsider"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Udskriv"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standard testside"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fototestside"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Udskriv ikke nogen testsider"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Udskriver testsider..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsider er blevet sendt til printeren.\n"
-"Dette kan tage lidt tid før printeren starter.\n"
-"Udskrivningsstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsider er sendt til printeren.\n"
-"Det kan tage lidt tid før printeren starter.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Fungerer det korrekt?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Rå printer"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"For at skrive en fil fra kommandolinjen (terminalvinduet) kan du enten bruge "
-"programmet '%s <fil>' eller et grafisk printerværktøj: 'xpp <fil>' eller "
-"'kprinter <fil>'. De grafiske værktøjer lader dig vælge printeren og ændre "
-"indstillingerne på en nem måde.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Disse kommandoer kan du også bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"'%s'-kommandoen tillader også ændring af indstillingsmulighederne for et "
-"bestemt udskriftsjob. Tilføj blot de ønskede indstillinger til "
-"kommandolinjen, fx '%s <fil>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Hvilke muligheder der er for den aktuelle printer kan du enten læse på "
-"listen vist nedenfor, eller klikke på knappen 'liste med printermuligheder'%"
-"s.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Her er en liste over tilgængelige printmuligheder for den aktuelle printer:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Denne kommando kan du også bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"For at få en liste af tilgængelige muligheder for den aktuelle printer kan "
-"du klikke på knappen 'Liste med printermuligheder'."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>' eller '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan også bruge den grafiske grænseflade 'xpdq' til at sætte "
-"valgmuligheder og behandle udskriftsopgaver.\n"
-"Hvis du bruger KDE som skrivebordsmiljø, har du en 'panik-knap', en ikon på "
-"skrivebordet, benævnt med 'STOP printer!', som stopper alle udskriftsopgaver "
-"øjeblikkeligt når du klikker på den. Dette er fx nyttigt hvis papiret "
-"krøller sammen.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"'%s'- og '%s'-kommandoerne tillader også ændring af indstillingsmulighederne "
-"for et bestemt udskriftsjob. Tilføj blot de ønskede indstillinger til "
-"kommandolinjen, fx '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Luk"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Udskriver eller skanner på '%s'"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Udskriver på printeren '%s'"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste med printermuligheder"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Din HP-multifunktionsenhed blev konfigureret automatisk til at kunne skanne. "
-"Nu kan du skanne med 'scanimage' ('scanimage -d hp:%s' for at angive "
-"skanneren hvis du har mere end én) fra kommandolinjen eller med den grafiske "
-"grænseflade 'xscanimage' eller 'xsane'. Hvis du bruger GIMP kan du også "
-"skanne ved at vælge det passende punkt i menuen 'Filer/Hent'. Brug også 'man "
-"scanimage' og 'man sane-hp' på kommandolinjen for at få mere information\n"
-"\n"
-"Brug ikke \"scannerdrake\" på denne enhed!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Din HP-multifunktionsenhed blev konfigureret automatisk til at kunne skanne. "
-"Nu kan du skanne med 'ptal-hp %s scan ...' fra kommandolinjen. Skanning via "
-"en grafisk grænseflade eller fra GIMP er endnu ikke understøttet for din "
-"enhed. Du kan finde mere information i filen \"/usr/share/doc/hpoj-0.8/ptal-"
-"hp-scan.html\" på dit system. Hvis du har en HP LaserJet 1100 eller 1200 kan "
-"du kun skanne når du har skannermuligheden installeret på udstyret.\n"
-"\n"
-"Brug ikke \"scannerdrake\" på denne enhed!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Læser printerdata ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Overfør printerkonfiguration"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiere printerkonfigurationen du har sat op for køserveren %s til %"
-"s, din nuværende køserver. Al konfigurationsdata (printernavn, beskrivelse, "
-"opkoblingstype og standardindstillinger) bliver overtaget, men ikke "
-"opgaver.\n"
-"Ikke alle køer kan overføres på grund af:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS understøtter ikke printere på Novellservere eller printere som sender "
-"dataene ind i en frit-formet kommando.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ understøtter kun lokale printere, eksterne LPD printere, og Sokkel/TCP "
-"printere.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng understøtter ikke IPP printere.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Desuden kan køer lavet med dette program eller \"foomatic -configure\" ikke "
-"overflyttes."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Printere konfigureret med PPD-filerne, som producenten har lavet, eller med "
-"CUPS egne drivere kan heller ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Vælg printerene som du vil overflytte og klik\n"
-"\"Overfør\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Overfør ikke printere"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Overfør"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En printer med navnet \"%s\" eksisterer allerede på %s. \n"
-"Klik \"Overfør\" for at overskrive.\n"
-"Du kan også give et nyt printernavn, eller overspringe denne printer."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Navn på printer bør kun indeholde bogstaver, tal og understregen _"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Printeren \"%s\" eksisterer allerede,\n"
-"ønsker du virkelig at overskrive dens konfiguration?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nyt printernavn"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Overfører %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Du har overført din tidligere standard-printer '%s', skal den også være "
-"standard-printer under det nye printersystem %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Opfrisker printerdata ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration af en ekstern printer"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Starter netværk ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfigurér netværket nu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Netværksfunktionalitet ikke konfigureret"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Du er ved at konfigurere en ekstern printer. Dette kræver en virkende "
-"netværksadgang, men dit netværk er endnu ikke konfigureret. Hvis du vil "
-"fortsætte uden en netværkskonfiguration, vil du ikke kunne bruge printeren "
-"som du konfigurerer nu. Hvordan ønsker du at fortsætte?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Fortsæt med konfigurering af netværk"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Netværksopsætningen lavet under installationen kan ikke startes nu. Tjek om "
-"netværket bliver tilgængeligt efter opstart af dit system, og ret "
-"konfigurationen med Mandrake Kontrolcenter, afsnittet 'Netværk og internet'/ "
-"'Forbindelse', og konfigurér derefter printeren også med Mandrake "
-"Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Netværksadgangen kørte ikke og kunne ikke startes. Tjek din konfiguration og "
-"dit udstyr. Prøv derefter at konfigurere din eksterne printer igen."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Genstarter printsystemet ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "høj"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et printersystem på sikkerhedsniveauet %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Du er ved at installere printsystemet %s på et system kørende på "
-"sikkerhedsniveau %s.\n"
-"\n"
-"Dette printsystem kører som en dæmon (baggrundsproces) som venter på "
-"printeropgaver og behandler dem. Denne dæmon er også tilgængelig for "
-"eksterne maskiner via netværket, og derfor er det et muligt angrebspunkt. "
-"Derfor bliver kun nogle få udvalgte dæmoner startet op som standard i dette "
-"sikkerhedsniveau.\n"
-"\n"
-"Ønsker du virkelig at konfigurere udskrivning på denne maskine?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Starter printsystemet ved opstart"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Printsystemet (%s) vil ikke blive startet automatisk, når maskinen startes "
-"op.\n"
-"Det er muligt at den automatiske opstart blev slået fra ved ændring til et "
-"højere sikkerhedsniveau, fordi printsystemet er et muligt angrebspunkt.\n"
-"\n"
-"Ønsker du at have den automatiske opstart af printsystemet slået til igen?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Tjekker installeret programmel..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Fjerner LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Fjerner LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Vælg printerkø-behandler"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket printersystem (spooler) ønsker du at bruge?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurerer printer '%s'..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installerer Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printer-muligheder"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Forbereder PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Konfigurerer programmer..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Vil du gerne konfigurere udskrivning?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Printsystem: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"De følgende printere er konfigureret. Dobbeltklik på en printer for at ændre "
-"dens indstillinger; for at gøre den til standard-printer: for at se "
-"information om den; eller for at gøre en ekstern CUPS-printer tilgængelig "
-"for Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"De følgende printere er konfigureret. Dobbeltklik på en printer for at ændre "
-"dens indstillinger, for at gøre den til standard-printer, eller for at se "
-"information om den."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Opfrisk printerliste (for at vise alle tilgængelige eksterne CUPS-printere)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Ændr printsystemet"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normal udgave"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Ønsker du at konfigurere en anden printer?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Ændr printerkonfiguration"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Hvad ønsker du at forandre på, på denne printer?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Gør det!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Printeropkoblingstype"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Printernavn, beskrivelse, sted"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerproducent, model, driver"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Printerproducent, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Sæt printeren som standard-printer"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Tilføj denne printer til Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Fjern denne printer fra Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Udskriver testsider"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Véd hvordan denne printer bruges"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Fjern printer"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Fjerner gammel printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standard printer"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printeren '%s' er nu sat som standard-printer."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Tilføjer printer til Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Printeren \"%s\" blev tilføjet til Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Kunne ikke tilføje printeren \"%s\" til Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Fjerner printer fra Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Printeren \"%s\" blev fjernet fra Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Kunne ikke fjerne printeren \"%s\" fra Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ønsker du virkelig at fjerne printeren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Fjerner printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfiguration af proxy (mellemvært)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Velkommen til programmet for proxy-konfigurering.\n"
-"\n"
-"Her vil du kunne opsætte dine http- og ftp-proxyer\n"
-"med eller uden brugernavn og adgangskode\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Udfyld venligst oplysningerne om http-proxy\n"
-"Lad det være blankt hvis du ikke ønsker en http-proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url burde begynde med 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port-delen bør være numerisk"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Udfyld venligst oplysningerne om ftp-proxy\n"
-"Lad det være blankt hvis du ikke ønsker en ftp-proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url burde begynde med 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Indtast brugernavn og adgangskode på proxy, hvis nødvendigt.\n"
-"Lad det være blankt hvis du ikke ønsker brugernavn/adgangskode"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "brugernavn"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "adgangskode"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "genindtast adgangskode"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Adgangskoderne stemmer ikke overens. Prøv igen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke tilføje en partition til _formatéret_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan ikke skrive filen %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fejlede"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fejlede (måske mangler raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron en periodisk kommando planlægger"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bruges til at overvåge batteristatus og skrive log til syslog.\n"
-"Den kan også bruges til at lukke maskinen når batteriet er på lav."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Kører planlagte kommandoer med 'at' kommandoen på tiden specificeret da 'at' "
-"blev kørt, og kører batch kommandoer når den gennemsnitlige systembelastning "
-"er lav nok"
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX program der kører bruger-specifikke programmer på "
-"planlagte tidspunkter. Vixie cron tilføjer en del forbedringer til den "
-"basale UNIX cron, inklusive bedre sikkerhed og stærkere "
-"konfigurationsmuligheder."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM tilføjer muse-support til tekst-baserede Linux applikationer såsom "
-"Midnight Commander. Den tillader muse-baseret kopiér-og-sætind operationer "
-"på konsollen og inkluderer support for pop-op-menuer i konsollen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake kører en søgning efter maskinel, og kan konfigurere nyt/ændret "
-"maskinel."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache er en webserver.  Den bruges til at betjene HTML-filer og CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver-dæmonen (kaldet inetd) starter forskellige internet-"
-"tjenester efter behov. Den er ansvarlig for at starte tjenester som telnet, "
-"ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de tjenester, "
-"den er ansvarlig for."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kerne 2.2 serien for at opsætte en brandmur "
-"til at beskytte din maskine mod netværksangreb."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakke indlæser den valgte tastatur-tabel, som valgt i /etc/sysconfig/"
-"keyboard. Dette kan vælges i kbdconfig programmet. Dette bør være slået til "
-"på de fleste maskiner."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering af kernehoved i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf vil nogen gange arrangere udførelse af forskellige opgaver ved "
-"opstart for at vedligeholde systemkonfigurationen."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er printer-dæmonen som er nødvendig for at lpr virker.\n"
-"Den er basalt en server der håndterer udskrifts-opgaver."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuel Server, brugt til at bygge en server med høj ydelse og\n"
-"tilgængelighed."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) er en domæne-navneserver (DNS) der bruges til opslag af IP-"
-"adresser for værtsnavne."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og afmonterer alle netværks filsystemer (NFS), SMB (LanManager/"
-"Windows) og NCP (NetWare) monterings-stier"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle netværks-kort som er konfigureret\n"
-"til at starte ved opstart"
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en populær protokol til fildeling over TCP/IP netværk.\n"
-"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem /etc/"
-"exports filen"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en populær protokol til fildeling over TCP/IP\n"
-"netværk. Denne service giver NFS fillåsnings funktionalitet"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
-"opstart."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Støtter OKI 4w og kompatible winprintere."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA understøttelse er normalt til at understøtte ting som ethernet og "
-"modemer på bærbare.  Den vil ikke blive startet medmindre den er "
-"konfigureret, så det er sikkert at have den installeret på maskiner der ikke "
-"har behov for den."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper håndterer RPC tilslutninger, som bliver brugt af protokoller som "
-"NFS og NIS. Portmap serveren skal køre på maskiner som bruger protokoller "
-"der udnytter RPC mekanismen"
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix er en transport-agent for post, som bruges af programmer der flytter "
-"post fra en maskine til en anden."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Gemmer og henter systemets entropipøl for en højre kvalitet\n"
-"ved generering af tilfældige tal."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilordn rå enheder til blokenheder (som harddisk-\n"
-"partitioner) til brug af applikationer som Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed dæmonen giver mulighed for automatisk IP rutetabel opdatering via RIP "
-"protokollen. RIP kan bruges til små netværk, men når det kommer til mere "
-"komplekse netværk er der behov for en mere kompleks protokol."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen tillader brugere på et netværk at hente systeminformation "
-"fra enhver maskine på dette netværk."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen tillader brugere på et netværk a identificere\n"
-"hvem der er logget på andre maskiner"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokollen tillader eksterne brugere at hente en liste over alle "
-"brugere der er logget ind på en maskine, der kører rwho dæmonen (minder om "
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet på din maskine"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog er en facilitet som mange dæmoner bruger til log beskeder\n"
-"Det er en god idé altid at køre syslog"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Indlæs driverne for dine usb-enheder."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Starter X-font serveren (dette er obligatorisk for at XFree skal køre)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Vælg hvilke tjenester der skal startes automatisk ved opstart"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Printning"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fildeling"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Ekstern administration"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databaseserver"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktiverede for %d registrerede"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Tjenester"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "kører"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppet"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjenester og dæmoner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Beklager, der er ingen ekstra\n"
-"information om denne tjeneste."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ved opstart"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Tak fordi du valgte Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Velkommen til en verden af åben kildekode"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSofts succes er baseret på princippet om frit programmel. Dit nye "
-"operativsystem er resultatet af et samarbejde i det verdensomspændende Linux-"
-"samfund"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Vær med i det frie programmels verden"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Kom til at kende Åben Kildekode-samfundet og bliv medlem. Lær, undervis og "
-"hjælp andre ved at være med i de mange diskussionsfora som du finder på "
-"vores 'Samfunds'-netsider."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet og beskeder"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 giver dig det bedste programmel til at få adgang til alt "
-"hvad internettet har at tilbyde. Surf på nettet og se animationer med "
-"Mozilla og Konqueror, udveksl post og organiser dine personlige "
-"informationer med Evolution og Kmail, og meget mere."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedie og Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vil kunne presse din mulitimediemaskine til det yderste! "
-"Brug det nyeste programmel til at afspille musik og lydfiler, redigér og "
-"organiser dine billeder eller foto, se tv, og videoer, og meget mere"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Udvikling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 er den ultimative udviklingsplatform. Opdag styrken i GNU "
-"gcc-oversætteren og de bedste Åben Kildekode-udviklingsmiljøer"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolcenter"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 kontrolcenter er et samlet sted til fuldt ud at tilpasse "
-"og konfigurere dit Mandrake-system"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Brugergrænseflader"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux tilbyder at vælge mellem 11 forskellige grafiske "
-"skrivebordsmiljøer og vindueshåndteringer, inklusive GNOME 1.4, KDE 2.2.2, "
-"Window Maker og resten"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Serverprogrammel"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Lav din maskine om til en stærk server med bare nogen få klik med musen: "
-"Webserver, post, brandmur, ruter, fil- og print-server, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spil"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 tilbyder det bedste i Åben Kildekode-spil - arkade, kort, "
-"sport, action, strategi, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Har du lyst til at lære Linux nemt, hurtigt og gratis? MandrakeSoft tilbyder "
-"gratis træning i Linux, så vel som en måde at afprøve dine fremskridt, via "
-"MandrakeCampus - vores træningscenter på nettet"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitetssupport fra Linux-samfundet, og fra MandrakeSoft, er lige om "
-"hjørnet! Og hvis du allerede er en Linux-veteran kan du blive en ekspert og "
-"dele ud af din viden på vores support-netsted"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Vores konsulenter er klar for ethvert af jeres IT-projekter til at analysere "
-"jeres krav og tilbyde en tilpasset løsning. Drag fordel af MandrakeSofts "
-"udstrakte erfaring som Linux-producent til at fremkomme med et ægte IT-"
-"alternativ for jeres organisation."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Et komplet udvalg af Linux-løsninger, så vel som specialtilbud på vores "
-"produkter og godbidder, er tilgængelige i vores e-butik"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"For yderligere information om MandrakeSofts professionelle tjenester og "
-"kommercielle tilbud kan du se på den følgende netside:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installerer pakker..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Jeg kan ikke læse din partitionstabel, den er for ødelagt :(\n"
-"Jeg vil forsøge mig med at slette de beskadigede partitioner"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fejl!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finde filen '%s' som jeg behøver."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Autoinstallationskonfigurering"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
-"er lidt farlig, og må bruges med forsigtighed.\n"
-"\n"
-"Med denne mulighed vil du igen kunne køre installationen du gennemførte på "
-"denne maskine, med muligheden for at selv kunne ændre på nogen af "
-"indstillingerne.\n"
-"\n"
-"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
-"gennemført automatisk, uanset hvad du valgte under installationen.\n"
-"\n"
-"Ønsker du at fortsætte?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration af automatiske skridt"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vælg for hvert skridt om det skal være som under installationen, eller "
-"manuelt"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Velkommen.\n"
-"\n"
-"Parametrene for autokonfigurationen kan ses i afsnittene til venstre"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Tillykke!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten er blevet genereret.\n"
-"Du kan nu gennemføre installationen igen."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Autoinstallation"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Tilføj et element"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Fjern det sidste element"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Rapport \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Dæmon-Rapport\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Rapportdetaljer\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "total fremdrift"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sikkerhedskopiér systemfiler..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Sikkerhedskopifiler for disk..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Sikkerhedskopiér brugerfiler..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Fremdrift for sikkerhedskopiering af disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Sikkerhedskopiér andre filer..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"filliste sending via FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP forbindelsesproblem: Det var ikke muligt at sende dine backupfiler "
-"via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Fejl ved afsendelse af post. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Valg af filer"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Vælg filerne eller katalogerne og klik på 'Tilføj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Markér alle muligheder som du behøver.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
-"katalog.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Lav sikkerhedkopi af dine systemfiler. ( /etc kataloget)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Medtag ikke kritiske filer (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Med denne valgmulighed vil du være i stand til at kunne genskabe\n"
-"enhver version af dit /etc katalog."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Markér alle brugere som du vil have med i din sikkerhedskopi."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Medtag ikke cache for netlæser"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Fjern valgte"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Brugere"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Brug FTP forbindelse til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Indtast værtsnavn eller IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Indtast kataloget hvori\n"
-" sikkerhedskopien skal lægges på denne maskine."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Indtast dit brugernavn"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Indtast din adgangskode"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Husk denne adgangskode"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP forbindelse"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sikker forbindelse"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Brug CD/DVDROM til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Vælg din cd-plads"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Markér om du bruger et CDRW-medie"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Markér om du vil slette din CDRW før ny skrivning"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Markér om du ønsker at medtage\n"
-" installeringsopstart på din cd."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Indtast din CD-brænders enhedsnavn\n"
-" fx: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "brug bånd til sikkerhedskopieringen"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Indtast endhedsnavnet der skal bruges til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Indtast den maksimale størrelse\n"
-" tilladt for Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Indtast kataloget der skal gemmes:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Brug kvoter for sikkerhedskopieringsfiler"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Netværk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Diskdrev / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "timeligt"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dagligt"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "ugentligt"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "månedligt"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Brug dæmon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Vælg tidsinterval mellem\n"
-"hver sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Vælg mediet for\n"
-"sikkerhedskopiering."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Brug diskdrev med dæmon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Brug FTP med dæmon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Forsikr dig gerne at cron-dæmonen er med i dine tjenester."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Send epost-rapport efter hver sikkerhedskopiering til:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Hvad"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Hvor"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Hvornår"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Flere muligheder"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup konfiguration"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Vælg hvor du ønsker at sikkerhedskopiere"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "på diskdrev"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "over netværk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Vælg hvad du vil sikkerhedkopiere"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Lav sikkerhedskopi af system"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Lav sikkerhedskopi af brugere"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Håndpluk bruger"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Kilder for sikkerhedskopi: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemfiler:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Brugerfiler:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Andre filer:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Gem til diskdrev på stien: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Gem via FTP på vært : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t brugernavn: %s\n"
-"\t\t på sti: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Muligheder:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tMedtag ikke systemfiler\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSikkerhedskopiering bruger tar og bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSikkerhedskopiering bruger tar og gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Dæmon (%s) indeholder:\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Diskdrev.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-cdrom.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netværk via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Netværk via SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ingen konfiguration, klik på Vejleder eller Avanceret.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste over data som skal genskabes:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste over data der er ødelagt:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Afmarkér eller fjern det gerne næste gang."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Sikkerhedskopifiler er ødelagte"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Alle dine valgte data er blevet               "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          genskabt uden fejl på %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "        Genskab konfiguration     "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "O.k. at genskabe de andre filer."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Brugerliste at genskabe (kun den nyeste dato per bruger er vigtig)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Lav sikkerhedskopi af systemfiler før:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Vælg dato for genskabning"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Brug disk til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Genskab fra disk."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Indtast kataloget hvor sikkerhedskopier gemmes"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Vælg et andet medie at genskabe fra"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Andet medie"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Genskab system"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Genskab brugere"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Genskab andet"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "vælg sti at genskabe (i stedet for / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Lav ny sikkerhedskopi før genskabning (kun for inkrementalbackupper)."
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Fjern brugerkataloger før genskabning."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Genskab alle sikkerhedskopier"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Tilpasset genskabelse"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Hjælp"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Forrige"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gem"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Opbyg sikkerhedskopien"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Genskab"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Næste"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Lav sikkerhedskopieringen før genskablesen af den...\n"
-" eller efterse at stien til gemning er korrekt."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Fejl ved sendmail.\n"
-" din rapport blev ikke sendt\n"
-" Konfigurér venligst sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Pakkeliste til installation"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Fejl ved sending af fil via FTP.\n"
-" Ret venligst din FTP-konfiguration."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Udvælg de data du vil genskabe..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Vælg medie for sikkerhedskopi..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Vælg data for sikkerhedskopi..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"ingen konfigurationsfil fundet \n"
-"klik på Vejleder eller Avanceret."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Under udvikling ... vent venligst:-)"
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Lav sikkerhedskopi af systemfiler"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Lav sikkerhedskopi af brugerfiler"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Lav sikkerhedskopi af andre filer"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Total fremdrift"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Filer sendes via FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Sender filer..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Dataliste som skal medtages på cdrom."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Indtast hastighed på cd-brænder"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Indtast navnet på enheden for din cd-brænder (fx: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Markér om du ønsker at medtage installeringsopstart på din cd."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Lav sikkerhedskopi nu ud fra konfigurationsfil"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Se konfiguration af sikkerhedskopiering."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Konfiguration med vejleder"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Avanceret konfiguration"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Lav sikkerhedskopiering nu"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" På dette trin vil Drakbackup lade dig ændre:\n"
-"\n"
-" - Komprimeringsmåden:\n"
-"    \n"
-"      Hvis du markerer bzip2-komprimering, vil du komprimere\n"
-"      dine data bedre end gzip (omkring 2-10 %).\n"
-"      Denne valgmulighed er ikke markeret som standard fordi\n"
-"      denne komprimeringsmåde kræver mere tid (omkring 1000% mere).\n"
-" \n"
-" - Opdateringsmåden:\n"
-"\n"
-"      Denne valgmulighed vil opdatere din backup, men denne\n"
-"      valgmulighed er ikke rigtigt nyttig fordi du skal\n"
-"      dekomprimere din backup før du kan opdatere den.\n"
-"      \n"
-" - Måden for .backupignore:\n"
-"\n"
-"      som med cvs vil Drakbackup ignorere alle referencer\n"
-"      indeholdt i .backupignore-filer i hvert katalog.\n"
-"      fx: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Nogle fejl under sendmail kommer fra \n"
-" en dårlig konfiguration af postfix. For at løse dette skal du\n"
-" sætte myhostname eller mydomain i /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" - Lav sikkerhedskopi af systemfiler:\n"
-"       \n"
-"\tDenne mulighed lader dig sikkerhedskopiere dit /etc katalog,\n"
-"\tsom indeholder alle konfigurationsfiler. Vær \n"
-"\tforsigtig på genskabelsestrinnet med ikke at overskrive:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Lav sikkerhedskopi af brugerfiler: \n"
-"\n"
-"\tDenne mulighed lader dig vælge alle de brugere som du vil lave\n"
-"\tsikkerhedskopier for.\n"
-"\tFor at spare på diskplads anbefales du ikke medtager netlæseres\n"
-"\tcache.\n"
-"\n"
-" - Lav sikkerhedskopi af andre filer: \n"
-"\n"
-"\tDenne mulighed lader dig tilføje mere data som skal gemmes.\n"
-"\tMed denne sikkerhedskopieringsmåde er det ikke muligt i øjeblikket \n"
-"\tat vælge inkrementalbackup.\t\t\n"
-" \n"
-" - Inkrementalbackupper:\n"
-"\n"
-"\tInkrementalbackup er den stærkeste valgmulighed for \n"
-"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
-"\talle dine data den første gang, og derefter kun de ændrede data.\n"
-"\tSå vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
-"\tangivet dato.\n"
-"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
-"\tsikkerhedskopier blive slettet før hver sikkerhedskopiering.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"beskrivelse af genskabelse:\n"
-" \n"
-"Kun den nyeste dato vil blive brugt fordi med inkrementalbackup \n"
-"er det nødvendigt at genskabe hver gammel sikkerhedskopi én for én.\n"
-"\n"
-"Så hvis du ikke ønsker at genskabe en bruger, så fravælg denne helt.\n"
-"\n"
-"Ellers kan du vælge blot én af disse\n"
-"\n"
-" - Inkrementalbackupper:\n"
-"\n"
-"\tInkrementalbackup er den stærkeste valgmulighed for \n"
-"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
-"\talle dine data den første gang, og derefter kun de ændrede data.\n"
-"\tSå vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
-"\tangivet dato.\n"
-"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
-"\tsikkerhedskopier blive slettet før hver sikkerhedskopiering.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft ved DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Dette program er gratis programmel; du kan redistribuere det og/eller ændre\n"
-"det i henhold til betingelserne i GNU General Public License, som publiceret "
-"af\n"
-"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-"af licensen.\n"
-"\n"
-"Dette program er udgivet i håb om at det vil være anvendeligt, men\n"
-"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-"SALGBARHED eller EGNETHED TIL ET BESTEMT FORMÅL. Se GNU\n"
-"General Public License for flere detaljer.\n"
-"\n"
-"Du skulle have modtaget en kopi af GNU General Public License\n"
-"sammen med dette program; hvis ikke, skriv til Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,\n"
-"USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Beskrivelse:\n"
-"\n"
-"  Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
-"  I konfigurationen kan du vælge: \n"
-"\t- Systemfiler, \n"
-"\t- Brugeres filer, \n"
-"\t- Andre filer.\n"
-"\teller Hele dit system ...  eller Andet (såsom Windows partitioner)\n"
-"\n"
-"  Drakbackup lader dig tage sikkerhedskopier af dit system på:\n"
-"\t- Ddisk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Bånd.\n"
-"\n"
-"  Drakbackup lader dig genskabe dit system på\n"
-"  et katalog valgt af brugeren.\n"
-"\n"
-"  Som standard vil alle sikkerhedskopier blive lagret i dit\n"
-"  /var/lib/drakbackup katalog\n"
-"\n"
-"  Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Genskabelsestrin:\n"
-"  \n"
-"  I genskabelsestrinnet vil Drakbackup fjerne dit nuværende katalog \n"
-"  og kontrollere at alle dine backupfiler ikke er ødelagte. Det \n"
-"  anbefales at du laver en sidste sikkerhedskopiering før genskabelse.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-"Vær forsigtig når du bruger ftp-backup, fordi kun \n"
-"sikkerhedskopier som er opbygget allerede bliver sendt til serveren.\n"
-"Så for øjeblikket skal du bygge sikkerhedskopien på din disk \n"
-"før den sendes til ftp-serveren.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemer med genskabelse af sikkerhedskopier:\n"
-"\n"
-"I genskabelsestrinnet vil Drakbackup kontrollere alle dine\n"
-"backupfiler før genskabelse af dem.\n"
-"Før genskabelsen vil Drakbackup fjerne \n"
-"dit nuværende katalog, og alle dine data vil gå tabt.\n"
-"Det er vigtigt at være forsigtig og ikke ændre sikkerhedskopieringens\n"
-"datafiler i hånden.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Beskrivelse:\n"
-"\n"
-"  Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
-"  I konfigurationen kan du vælge \n"
-"\t- Systemfiler, \n"
-"\t- Brugeres filer, \n"
-"\t- Andre filer.\n"
-"\teller Hele dit system ...  eller Andet (såsom Windows partitioner)\n"
-"\n"
-"  Drakbackup lader dig tage sikkerhedskopier af dit system på:\n"
-"\t- Ddisk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Bånd.\n"
-"\n"
-"  Drakbackup lader dig genskabe dit system på\n"
-"  et katalog valgt af brugeren.\n"
-"\n"
-"  Som standard vil alle sikkerhedskopier blive lagret i dit\n"
-"  /var/lib/drakbackup katalog\n"
-"\n"
-"  Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Genskabelsestrin:\n"
-"  \n"
-"  I genskabelsestrinnet vil Drakbackup fjerne dit nuværende katalog \n"
-"  og kontrollere at alle dine backupfiler ikke er ødelagte. Det \n"
-"  anbefales at du laver en sidste sikkerhedskopiering før genskabelse.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installationen af %s mislykkedes. Følgende fejl opstod:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Søg efter installerede skrifttyper"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Fravælg installerede skrifttyper"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "fortolk alle skrifttyper"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "kunne ikke finde nogen skrifttyper"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "færdig"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "Kunne ikke finde nogen skrifttyper i dine monterede partitioner"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Genvælg korrekte skrifttyper"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "Kunne ikke finde nogen skrifttyper.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Søg efter skrifttyper i installeret liste"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopi af skrifttyper"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation af True Type-skrifttyper"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Vent venligst på ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installation af True Type færdig"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konvertering af skrifttyper"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "opbyg type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencer"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Konvertering af ttf-skrifttyper"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Konvertering af pfm-skrifttyper"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Undertryk midlertidige filer"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Genstart XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Undertryk skrifttypefiler"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "genstart af xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Før du installerer nogen skrifttyper bør du være sikker på at du har lov til "
-"at bruge og installere dem på dit system. \n"
-"\n"
-"-Du kan installere skrifttyperne på normal måde. I sjældne tilfælde kan "
-"fejlbehæftede skrifttyper få din X-server til at hænge."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Import af skrifttyper"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hent skrifttyper fra Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Afinstallér skrifttyper"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Avancerede muligheder"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Liste over skrifttyper"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Vælg de programpakker som vil understøtte skrifttyperne:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generelle printere"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vælg skrifttypefilen eller -kataloget oh klik på 'Tilføj'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installationsliste"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Klik her hvis du er sikker."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Her hvis ikke."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Fravalgte alt"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Valgte alt"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Fjern liste"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Begyndelsestester"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiér skrifttyper på dit system"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installér og konvertér skrifttyper"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Efterbehandling for installering"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Fjern skrifttyper på dit system"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Efterbehandling for afinstallering"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Deling af internetforbindelse"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling af internetforbindelse er slået til"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Deling er aktiveret.\n"
-"\n"
-"Hvad ønsker du at gøre?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "de-aktivér"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "træd af"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "genkonfigurér"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Slår servere fra..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Deling af internetforbindelse er nu slået fra"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling af internetforbindelse er slået fra"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Den er de-aktiveret for nærværende\n"
-"Hvad ønsker du at gøre?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktivér"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Aktiverer servere..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Deling af internetforbindelse er nu slået til"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
-"Med denne mulighed vil andre maskiner på dit lokale netværk kunne bruge "
-"internetforbindelsen på denne maskine.\n"
-"\n"
-"Bemærk: du skal bruge en dediceret netværksadapter, for at lave et lokalt "
-"netværk (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Grænseflade %s (benytter modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Grænseflade %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ikke nogen netværksadapter i dit system!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ingen ethernet netværksadapter er blevet fundet på dit system. Kør venligst "
-"værktøjet til maskinel konfiguration."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netværksgrænsesnit"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Der er kun én konfigureret netværksadapter i dit system:\n"
-"\n"
-"%s\n"
-"\n"
-"Jeg skal til at sætte dit lokalnet på med den adapter."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Vælg hvilken netværksadapter som skal forbindes til dit lokalnet."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Netværksgrænsesnit allerede konfigureret"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Advarsel, netværkskortet (%s) er allerede konfigureret.\n"
-"\n"
-"Ønsker du en automatisk re-konfiguration?\n"
-"\n"
-"Du kan gøre det i hånden, men du skal vide hvad du gør."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatisk rekonfiguration"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Vis aktuelle grænsesnitskonfiguration"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Nuværende konfiguration af `%s':\n"
-"\n"
-"Netværk: %s\n"
-"IP-adresse: %s\n"
-"IP-attribut: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Jeg kan beholde din aktuelle konfiguration og antage at du allerede har sat "
-"en DHCP-server op; i så tilfælde kontrollér da gerne at jeg har læst det C-"
-"klasse-netværk korrekt, som du bruger for dit lokalnetværk; jeg vil ikke "
-"genkonfigurere det og jeg vil ikke røre ved din konfiguration af DHCP-"
-"serveren.\n"
-"\n"
-"Ellers kan jeg genkonfigurere dit grænsesnit og genkonfigurere en DHCP-"
-"server for dig.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-klasse lokalnetværk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Denne) DHCP-servers IP-adresse"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Rekonfigurér grænsesnit og DHCP-server"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalnetværket endte ikke med `.0', står af."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Brandmurkonfiguration fundet!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
-"muligvis lave manuelle rettelser efter installationen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurerer..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer skript, installerer programmel, starter servere..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer med installation af %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt er blevet konfigureret.\n"
-"Du kan nu dele din internetforbindelse med andre maskiner på dit lokale "
-"netværk, ved at bruge DHCP."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Indstilling er allerede gjort. men er de-aktiveret for nærværende."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Indstilling er allerede gjort. og er for nærværende aktiv."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling af Internetforbindelse har aldrig været konfigureret."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguration af deling af internetforbindelse"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Velkommen til værktøjet til deling af internetforbindelse!\n"
-"%s\n"
-"\n"
-"Klik på Konfigurér for at starte programmet til at dele din "
-"internetforbindelse!"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netværkskonfiguration (%d adaptorer)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Slet profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil der skal slettes:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Ny profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Navnet på profilen der skal oprettes (den nye profil oprettes som en \n"
-"kopi af den nuværende) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Værtsnavn: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetadgang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Type:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Grænseflade:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Vent venligst"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurér Internetadgang..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN konfiguration"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drivprogram"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Grænseflade"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurér lokalnetværk..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klik her for at starte vejlederen ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Vejleder..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Anvend"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Vent venligst... Sætter konfigurationen i anvendelse"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Tilsluttet"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ikke tilsluttet"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Tilslut..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Afbrud..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der måske bruger "
-"dit netværk"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerede grænsesnit.\n"
-"Konfigurér disse først ved at klikke på 'Konfigurér'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfiguration"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Opstartsprotokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Startede med opstart"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivér nu"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivér nu"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Dette grænsesnit er ikke blevet konfigureret endnu.\n"
-"Start konfigurationsvejlederen i hovedvinduet"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internet-opkobling.\n"
-"Opret én først ved at klikke på 'Konfigurér'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Type af forbindelse"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametre"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Indstiller sikkerhedsniveau"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolcenter"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Vælg det værktøj du ønsker at benytte"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Østeuropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Vesteuropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australien"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "New Zealand"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Sydafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Indtast din tv-standard og land"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-standard:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Område:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Skanning for tv-kanaler i gang..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Skanner for tv-kanaler"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Intet tv-kort genkendt!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Intet tv-kort blev genkendt på din maskine. Tjek venligst at et video/tv-"
-"kort der understøttes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan besøge vores database over udstyr på:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "brug: keyboarddrake [--expert] [tastatur]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Vælg tastaturlayout."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Skift cdrom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Indsæt installations-cdrom'en i dit cdrom-drev og tryk på Ok, når det gjort\n"
-"Hvis du ikke har den - tryk på Annullér, så undgås levende opgradering"
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte levende opgradering!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Ændringen er fortaget, men for at være effektiv skal du logge ud"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Vis kun for den valgte dag"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fil/_Ny"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<Ctrl>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fil/_Åbn"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<Ctrl>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fil/_Gem"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<Ctrl>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fil/Gem _som"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fil/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Indstillinger"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Indstillinger/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hjælp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Hjælp/_Om"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Bruger"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Beskeder"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "System"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Forklaringer til Mandrake-værktøjer"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "søg"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Et værktøj til at overvåge dine logfiler"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Indstillinger"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "Samstemmende:"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "Men ikke samstemmende"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Vælg fil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Indhold af filen"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Post og SMS påmindelse"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vent venligst, fortolker filen: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Post og SMS påmindelseskonfiguration"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Velkommen til programmet for post og SMS-konfigurering.\n"
-"\n"
-"Her vil du kunne opsætte påmindelsessystemet\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Opsætning af tjenester"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Du vil modtage en advarsel hvis en af de valgte tjenester ikke længere kører"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "indlæs opsætning"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Du vil modtage en advarsel hvis belastningen er højere end denne værdi"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "advarsels-konfiguration"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Konfigurerer måden systemet vil advare dig på"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gem som..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Vælg muse-type."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ingen seriel_usb fundet\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulering af tredje knap?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s fundet på %s, skal det konfigureres?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Vælg en skanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Denne %s-skanner er ikke understøttet"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake kunne ikke genkende din %s-skanner.\n"
-"Vælg venligst den enhed hvor din skanner er isat"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "vælg enhed"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Denne %s-skanner skal være konfigureret af printerdrake.\n"
-"Du kan starte printerdrake fra Mandrake Kontrolcenter i Udstyr-afsnittet."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Din %s-skanner er blevet konfigureret.\n"
-"Du kan nu skanne dokumenter med 'XSane' fra Multimedie/grafik iprogrammenuen."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Brandmurskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Brandmurskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brandmure\n"
-"\n"
-"Du har allerede indstillet en brandmur.\n"
-"Klik på Konfigurér for at ændre eller fjerne brandmuren"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brandmure\n"
-"\n"
-"Klik på Konfigurér for at sætte en standard-brandmur op"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Vælg sprog"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Vælg installations-metode"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Harddisk bestemmelse"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurér mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Vælg tastatur"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sikkerhed"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Vælg filsystemer"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatér partitioner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Vælg pakker til installation"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installér system"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tilføj bruger"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurér netværk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurér tjenester"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installér systemopstarter"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Opret opstartsdiskette"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurér X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installér opdateringer"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Afslut installation"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall-konfigurator\n"
-"\n"
-"Dette konfigurerer en personlig brandmur for denne Mandrake Linux maskine.\n"
-"For en stærk dedikeret brandmurs-løsning se venligst den specialiserede "
-"MandrakeSecurity Firewall-distribution."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi vil nu spørge dig om hvilke tjenester du gerne vil tillade\n"
-"internettet at forbinde til.  Tænk grundigt over disse\n"
-"spørgsmål, da din maskines sikkerhed er vigtig.\n"
-"\n"
-"Hvis du ikke bruger nogle af disse tjenester så skærm dem af\n"
-"med brandmuren.  Du kan altid ændre indstillingerne når du vil\n"
-"ved at køre dette program igen!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kører du en webserver på denne maskine som du har brug for at hele\n"
-"internettet kan se? Hvis du kører en webserver som kun behøver at blive\n"
-"tilgået af denne maskine kan du roligt svare NEJ her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kører du en DNS-navneserver på denne maskine? Hvis du ikke har sat\n"
-"en op til at give IP- og zone-information til hele internettet kan du svare\n"
-"nej her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Ønsker du at tillade indgående Secure Shell ssh-forbindelser?\n"
-"Det er en erstatning for telnet som du måske vil bruge til at logge ind.\n"
-"Hvis du bruger telnet nu bør du afgjort skifte til ssh. telnet er ikke\n"
-"krypteret - så nogle angribere kan stjæle din adgangskode hvis du bruger\n"
-"den. ssh er krypteret og tillader ikke den slags aflytning."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vil du tillade indgående telnet-forbindelser?\n"
-"Dette er virkeligt usikkert som vi har forklaret i det foregående billede. "
-"Vi\n"
-"anbefaler stærkt at du svarer NEJ her og bruger ssh i stedet for telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kører du en FTP-tjeneste på denne maskine som du har brug for at hele\n"
-"internettet har adgang til? Hvis du har så anbefaler vi stærkt at du kun\n"
-"bruger den til anonyme overførsler. En hvilkensomhelst adgangskode sendt\n"
-"over FTP kan stjæles af visse angribere, siden FTP heller ikke bruger\n"
-"kryptering til at overføre adgangskoder.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kører du en post-server her? Hvis du sender beskeder med\n"
-"pine, mutt eller en anden tekstbaseret post-klient er det sandsynligt.\n"
-"Ellers bør du skærme den væk.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kører du en POP- eller IMAP-tjeneste her? Dette kan bruges til at betjene "
-"ikke-webbaserede postkonti for folk via denne maskine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Du ser ud til at køre en 2.2-kerne. Hvis din IP-netværksadresse\n"
-"bliver sat automatisk af en maskine i dit hjem eller kontor\n"
-"(dynamisk tildelt) bør vi tillade dette. Er dette tilfældet?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Får din maskine tiden synkroniseret efter en anden maskine?\n"
-"Oftest er dette brugt af større Unix/Linux-organisationer for at\n"
-"synkronisere tiden for logning og lignende. Hvis du ikke er en del\n"
-"af et større kontor og ikke har hørt om dette er det sandsynligvis\n"
-"ikke tilfældet."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurationen er færdig. Skal vi skrive disse ændringer til disken?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan ikke åbne %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan ikke åbne %s for skrivning: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nej, jeg har ikke brug for DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, jeg har brug for DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nej, jeg har ikke brug for NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, jeg har brug for NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Gem ikke"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Gem og afslut"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Vejleder til brandmurskonfiguration"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nej (sæt en brandmur op mod internettet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Nej (tillad dette gennem brandmuren)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Vent venligst..., kontrollerer installerede pakker"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Kunne ikke installere de krævede pakker: %s og Bastille.\n"
-" Prøv at installere dem manuelt."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netværksmaskine (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-vært, SMB-vært, mellemvært (proxy), SSH-vært"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Værktøjer til Palm Pilot og Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Brandmur/router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Server for domænenavne (DNS) og netværksinformation (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontor-programmer: Tekstbehandler (kword, abiword), regneark (kspread, "
-"gnumeric), pdf-visere, o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Lyd-relaterede værktøjer: mp3 eller midi-afspillere, mixere o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bøger og vejledninger om Linux og Frit Programmel"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedie - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Samling af værktøjer til post, nyheder, filoverførsel og chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL eller MySQL database-server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Værktøjer til at lette indstillingen af din maskine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedie - Lyd"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Værktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolværktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix postserver, Inn nyhedsserver"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-station"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedie-station"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Flere grafiske miljøer (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop -miljøet, det grundlæggende grafiske miljø, med en vifte af "
-"supplerende værktøjer."
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk miljø"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Værktøjer til at skabe og brænde CD-er"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontor-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiske programmer som fx The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C og C++ udviklingsbiblioteker, programmer, og include-filer."
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netværksmaskine server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/diskussionsgrupper"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spillemaskine"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoafspillere og redigeringsværktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedie - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underholdnings-programmer: arkade, bræt, strategi, osv."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Værktøjssæt til at læse samt sende post og nyheder (pine, mutt, tin..) , og "
-"til at browse på nettet"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivering, emulering, overvågning"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig økonomi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Et grafisk miljø med brugervenlig samling af programmer og værktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter for forskellige protokoller inklusiv ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetadgang"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Lyd- og video-afspillere og redigeringsværktøjer"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andre grafiske miljøer"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redigeringsværktøjer, skaller, filværktøjer, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmer til at håndtere din økonomi, som fx gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personlig informationshåndtering"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedie - CD-brænding"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Videnskabelig arbejdsstation"
-
-#~ msgid "About"
-#~ msgstr "Om"
-
-#~ msgid "             Help           "
-#~ msgstr "             Hjælp          "
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "XawTV er ikke installeret ...\n"
-#~ "Dø bør installere den.\n"
-#~ " Bare skriv \"urpmi xawtv\""
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Kan ikke få fat i kernemoduler svarende til din kerne (fil %s mangler)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ingenting"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Vælg en forvalgt printer!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Brug/Opfrisk printerliste"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Du kan nu give dens parametre til modul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "montering mislykkedes"
-
-#~ msgid ""
-#~ "The characters of your language can't be displayed in console,\n"
-#~ "so the messages will be displayed in english during installation"
-#~ msgstr ""
-#~ "Tegnene i dit sprog kan ikke vises i konsollen\n"
-#~ "så beskederne vil blive vist på engelsk under installationen"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
deleted file mode 100644
index 9629e8953..000000000
--- a/perl-install/share/po/de.po
+++ /dev/null
@@ -1,12653 +0,0 @@
-# german translation of DrakX (cooker/gi/perl-install/share/po/de.po).
-# Copyright (C) 1999,2000,2001 MandrakeSoft.
-# Dr. Hinrich Göhlmann <hgoehlmann@gmx.de>, 1999,2000
-# Stefan Siegel <siegel@linux-mandrake.com>, 1999,2000,2001,2002
-# Daniel Haischt <daniel.haischt@student.fh-reutlingen.de>, 2000
-# Peer Dunker <peer46@gmx.net>, 2001
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-10 11:56+0100\n"
-"Last-Translator: Stefan Siegel <siegel@linux-mandrake.com>\n"
-"Language-Team: German <cooker-i18n@linux-mandrake.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Alle Karten getrennt konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama Erweiterung verwenden"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Nur Karte „%s“ (%s) konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Mehrkarten-Einstellung"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ihr System erlaubt die Verwendung einer Mehrkarten Konfiguration.\n"
-"Was wollen Sie tun?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Wählen Sie Ihre Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Wählen Sie einen X Server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X Server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Wählen Sie einen X Treiber"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X Treiber"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welche XFree-Konfiguration wollen Sie verwenden?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ihre Grafikkarte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. Ihre Karte wird auch von XFree %s unterstützt, wodurch Sie \n"
-"bessere 2D-Unterstützung erhalten können."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ihre Grafikkarte kann mit XFree %s 3D-hardwarebeschleunigt werden."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s mit 3D-Hardwarebeschleunigung"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM \n"
-"UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS FÃœHREN."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s mit EXPERIMENTELLER 3D-Hardwarebeschleunigung"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEM: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM UND KANN \n"
-"ZUM STEHENBLEIBEN IHRES RECHNERS FÃœHREN. Ihre Karte wird auch von \n"
-"XFree %s unterstützt, wodurch Sie bessere 2D-Unterstützung erhalten \n"
-"können."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Installationsbildschirmtreiber)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Wählen Sie die Speichergröße Ihrer Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Wählen Sie die Einstellungen für den Server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Wählen Sie Ihren Monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
-"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
-"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
-"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
-"Synchronisationsrate auswählen, da Sie sonst Ihren Monitor beschädigen \n"
-"könnten. Im Zweifelsfall wählen Sie bitte eine konservativere \n"
-"Einstellung."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontale Wiederholfrequenz"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikale Wiederholfrequenz"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ihr Monitor ist nicht konfiguriert"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ihre Grafikkarte ist noch nicht konfiguriert"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Die Auflösungen wurden noch nicht ausgewählt"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Möchten Sie die vorgenommenen Einstellungen prüfen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Prüfen der Einstellungen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"Versuchen Sie bitte, einige Einstellungen zu ändern"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ein Fehler ist aufgetreten:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Verlassen in %d Sekunden"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ist dies richtig?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-"Ein Fehler ist aufgetreten. Versuchen Sie bitte, einige Parameter zu ändern"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Auflösung"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Wählen Sie bitte Auflösung und Farbtiefe"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkarte: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 Server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mehr"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Experten-Modus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Alle anzeigen"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Auflösungen"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastaturtyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Maustyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mausschnittstelle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horiz. Frequenz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor Vert. Frequenz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkarte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkartenidentifikation: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafikkartenspeicher: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farbtiefe: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Auflösung: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 Server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 Treiber: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window Konfiguration vorbereiten"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Was wollen Sie machen?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitor ändern"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Grafikkarte ändern"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Server Einstellungen ändern"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Auflösung ändern"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Informationen anzeigen"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Nochmals testen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Verlassen"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Die Änderungen beibehalten?\n"
-"Momentan wäre dies:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X zur Startzeit"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
-"automatisch die grafische Oberfläche (= der X Server) aktiviert wird.\n"
-"Wollen Sie, dass X nach jedem Neustart direkt zur Verfügung steht?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-"Bitte loggen Sie sich erneut in %s ein, \n"
-"um die Änderungen wirksam werden zu lassen."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Bitte loggen Sie sich aus, und drücken Sie Ctrl-Alt-Rücktaste"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 Farben (8 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 Farben (15 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 Farben (16 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 Millionen Farben (24 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 Milliarden Farben (32 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB oder mehr"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640×480 bei 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800×600 bei 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024×768 bei 87 Hz, interlaced (kein 800×600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024×768 bei 87 Hz, interlaced und 800×600 bei 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800×600 bei 60 Hz und 640×480 bei 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024×768 bei 60 Hz und 800×600 bei 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hochfrequenz SVGA, 1024×768 bei 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ihr Monitor kann 1600×1200 bei 70 Hz darstellen"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ihr Monitor kann 1600×1200 bei 76 Hz darstellen"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Erster Sektor der Boot-Partition"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Erster Sektor der Platte (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Installation"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Wo soll der Betriebssystemstarter installiert werden?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/Grub Installation"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO mit Textmenü"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO mit grafischem Menü"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot von DOS/Windows aus (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Haupt-Optionen des Betriebssystemstarters"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Zu verwendender Betriebssystemstarter"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installation des Betriebssystemstarters"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot Gerät"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (funktioniert nicht mit alten BIOS Versionen)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video Modus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Passwort"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Passwort (erneut)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Gebrauch der Kommandozeilen-Parameter einschränken"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "Einschränken"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Die Partition /tmp bei jedem Systemstart säubern"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Geben Sie, falls nötig, die genaue RAM Größe an (%d MB gefunden)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Mehrere Profile einschalten"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Geben Sie die RAM Größe in MB an"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Die Option „Gebrauch der Kommandozeilen-Parameter einschränken“ ist ohne \n"
-"Angabe eines Passworts wirkungslos"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Bitte versuchen Sie es erneut"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Die Passwörter stimmen nicht überein"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init Nachricht"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Verzögerung"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "BS-Startverzögerung für den Kern"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "BS-Start von CD erlauben"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Open Firmware Start erlauben"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Standard BS"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Sie haben sich entschieden, Ihren Betriebssystemstarter auf einer Partition "
-"zu starten.\n"
-"Das impliziert, dass Sie einen anderen Betriebssystemstarter im Master-Boot-"
-"Record haben (etwa System Commander).\n"
-"\n"
-"Von welchem Verzeichnis wollen Sie starten?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier sind die verschiedenen Einträge.\n"
-"Sie können weitere hinzufügen oder existierende ändern."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Hinzufügen"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fertig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ändern"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Welche Art Eintrag wollen Sie hinzufügen?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Anderes Betriebssystem (SunOS ...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Anderes Betriebssystem (MacOS ...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Anderes Betriebssystem (Windows ...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kern"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Ãœbergeben"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Init-RamDisk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Schreiben/Lesen"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabelle"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsicher"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Identifikator"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Größe der Init-RamDisk"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Eintrag löschen"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Leere Einträge sind nicht erlaubt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Sie Müssen ein Kern-Abbild angeben"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Sie müssen die Verzeichnisbaumwurzel festlegen"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Dieser Eintrag existiert bereits"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Schnittstelle(n) %s %s gefunden"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Verfügen Sie über weitere?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Verfügen Sie über %s Schnittstellen?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nein"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Hardware Informationen anzeigen"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation des Treibers für die Karte %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(Modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welchen %s-Treiber soll ich versuchen?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In einigen Fällen benötigt der „%s“ Treiber zusätzliche Informationen,\n"
-"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
-"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
-"überlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
-"Treiber kann in seltenen Fällen zum „Hängenbleiben“ des Rechners führen, was "
-"jedoch keine Hardwareschäden nach sich ziehen sollte)"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatische Erkennung"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Optionen angeben"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sie müssen nun die Optionen für Modul %s angeben.\n"
-"Bedenken Sie, dass Adressen alle mit „0x“ beginnen müssen, etwa „0x300“"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sie müssen nun die Optionen für Modul %s angeben.\n"
-"Optionen haben die Form „name=wert name2=wert2“.\n"
-"Beispielsweise: „io=0x300 irq=7“"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modul-Optionen:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laden von Modul %s schlug Fehl.\n"
-"Wollen Sie es erneut mit anderen Parametern versuchen?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "Zugriff auf X-Programme"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "Zugriff auf RPM-Werkzeuge"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "„su“ erlauben"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "Zugriff auf Verwaltungsdateien"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s wurde bereits hinzugefügt)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dieses Passwort ist zu einfach"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Bitte geben Sie ein Benutzerkennzeichen an"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Das Benutzerkennzeichen sollte nur aus Kleinbuchstaben, Ziffern, \n"
-"„-“ und „_“ bestehen"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Dieses Benutzerkennzeichen existiert bereits"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Benutzer hinzufügen"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Benutzerkennzeichen einrichten\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Benutzer akzeptieren"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Benutzername"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Benutzerkennzeichen"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Symbol"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass beim Systemstart automatisch \n"
-"ein Benutzer angemeldet wird.\n"
-"Wollen Sie davon Gebrauch machen?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Wählen Sie den Standard-Nutzer:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Wählen Sie den Window-Manager, den Sie verwenden wollen:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Bitte wählen Sie die zu verwendende Sprache."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Sie können andere Sprachen auswählen, die nach der Installation zur "
-"Verfügung stehen."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alle"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Allen Benutzern erlauben"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Kein Teilen"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Das Paket %s muss installiert sein. Soll ich es installieren?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Sie können die Dateien mittels Samba oder NFS anbieten. Welche Variante "
-"wollen Sie?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Das zwingend benötigte Paket „%s“ fehlt."
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Wollen Sie Benutzern erlaubern, Verzeichnisse freizugeben?\n"
-"Wenn Sie das erlauben, können die Anwender Verzeichnisse in Konqueror oder "
-"Nautilus im Kontextmenü der eintsprechenden Verzeichnisses freigeben.\n"
-"\n"
-"Mit „Benutzerdefiniert“ können Sie eine Einstellung pro Kennzeichen "
-"vornehmen.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Abbruch"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Userdrake starten"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Das Teilen zwichen Benutzern verwendet die Gruppe „fileshare“.\n"
-"Sie können UserDrake verwenden, um Benutzerkennzeichen in diese Gruppe "
-"aufzunehmen."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Cracker-Spielplatz"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Schwach"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hoch"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Höher"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
-"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
-"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
-"da Angreifer mangels Passwort an Ihre Daten gelangen können!"
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
-"Netzwerkrechner kann hier nicht empfohlen werden."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Das ist die Standard-Sicherheitsebene für Rechner, mit Internetzugang \n"
-"als Klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Es gibt bereits mehr Restriktionen und jede Nacht werden automatische "
-"Sicherheitstests durchgeführt."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Mit dieser Sicherheitsebene wird es möglich, das System als einen \n"
-"Server zu verwenden.\n"
-"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
-"einzusetzen, der einer Vielzahl von Klienten einen Verbindungsaufbau \n"
-"erlaubt. Es sei hier angemerkt, dass Ihr Rechner, wenn Sie nur als \n"
-"Klient ins Internet gehen, besser eine niedrigere Sicherhetsebene \n"
-"verwenden sollte."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Diese Ebene bietet die selbe Funktionalität, wie die vorherige. Jedoch ist \n"
-"das System nun komplett geschlossen. Es ist die höchste Sicherheitsebene."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Wählen Sie eine Sicherheitsebene"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sicherheitsebene"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "„libsafe“ bei Servern verwenden"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Eine Bibliothek, die gegen sog. „buffer overflow“-Angriffe schützt."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Willkommen zum Betriebssystem-Starter %s\n"
-"\n"
-"Markieren Sie in obiger Liste ein Betriebssystem\n"
-"oder warten Sie %d Sekunden, dann starte ich Ihr Standard-System.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Willkommen zum Betriebssystem-Starter GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Verwenden Sie die Tasten %c und %c um ein Betriebssystem zu w„hlen."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Zum Starten des BS dr�cken Sie <Return>. Mit <e> k”nnen Sie das"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "Kommando vorher editieren, mit <c> erhalten Sie eine Kommandozeile."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "In %d Sekunden wird das gew„hlte BS automatisch gestartet."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Sie haben nicht genug Platz in „/boot“"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Arbeitsoberfläche"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start-Menü"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Sie können den Betriebssystemstarter\n"
-"nicht auf einer %s Partition installieren!\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Es steht noch keine Hilfe zur Verfügung.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration der Boot-Einstellungen"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datei"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datei/_Beenden"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Neuer kategorisierter Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Neuer Stil"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Herkömmlicher Stil"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Herkömmlicher Gtk+ Stil"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora beim Hochfahren starten"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB Modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot Modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Sie verwenden momentan „%s“ als Betriebssystemstarter.\n"
-"Wählen Sie „Konfigurieren“, wenn Sie den Assistenten starten wollen."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurieren"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "System-Modus"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "X-Window nach dem Hochfahren automatisch starten "
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nein ich will kein Autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja ich will Autologin mit diesem Kennzeichen und dieser Oberfläche"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Ich kann „/etc/inittab“ nicht zum lesen öffnen: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d Minuten"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 Minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d Sekunden"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr ""
-"Vor der Partitionierung kann ich keine Bildschim-Schnappschüsse machen."
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Die Bildschim-Schnappschüsse liegen nach der Installation unter „%s“"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankreich"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgien"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tschechische Republik"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Deutschland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Griechenland"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norwegen"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Schweden"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holland"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italien"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Östereich"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lesen Sie bitte aufmerksam!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Wenn Sie aboot verwenden wollen, müssen Sie ausreichend Platz am Anfang \n"
-"der Platte lassen (2048 Sektoren reichen aus)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fehler"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Wählen Sie ein Aktion aus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sie haben eine große FAT Partition \n"
-"(diese enthält häufig nur Microsoft DOS/Windows).\n"
-"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
-"(Wählen Sie sie an und drücken Sie dann „Größe verändern“)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Bitte klicken Sie auf eine Partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Details"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalisierendes FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Auslagerung"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Leer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Andere"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Dateisystemtypen:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Erzeugen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Verwenden Sie stattdessen „%s“"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Löschen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Verwenden Sie erst „umount“"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Änderung des Partitionstyps von %s, werden sämtliche Daten darauf "
-"gelöscht"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Wählen Sie eine Partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Wählen Sie eine andere Partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Verlassen"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "In den Experten-Modus wechseln"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "In den Normal-Modus wechseln"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Rückgängig"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Beenden ohne speichern"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Beenden ohne die Partitionstabelle zu speichern?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Möchten Sie die vorgenommenen Änderungen in „/etc/fstab“ speichern?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatisches Erstellen"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Alles löschen"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Festplatten-Informationen"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle Primärpartitionen sind in Gebrauch"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ich kann keinen weiteren Partitionen hinzufügen"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Um mehr Partitionen einrichten zu können, müssen Sie zunächst eine Partition "
-"löschen und anschließend eine erweiterte Partition erzeugen"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Partitionstabelle schreiben"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Partitionstabelle wiederherstellen"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Partitionstabelle retten"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Partitionstabelle neu laden"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Wechselmedien automatisch Einhängen"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Datei auswählen"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die gesicherte Partitionstabelle hat nicht dieselbe Größe\n"
-"Soll trotzdem fortgefahren werden?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Warnung"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Legen Sie eine Diskette in das Laufwerk\n"
-"Alle Daten auf dieser Diskette werden gelöscht!"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Ich Versuche, die Partitionstabelle zu retten"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Ausführliche Informationen"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Einhängpunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Optionen"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Größe verändern"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Bewegen"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatieren"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Einhängen"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Zum RAID hinzufügen"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Zum LVM hinzufügen"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Aushängen"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Löschen aus dem RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Löschen aus dem LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID modifizieren"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Als Loopback verwenden"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Erzeuge eine neue Partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Anfangssektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Größe in MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Dateisystemtyp: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Einhängpunkt: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Einstellung: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Die Loopback-Datei entfernen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Partitionstyp ändern"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Welches Dateisystem wollen Sie verwenden?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertiere ext2 zu ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Wo wollen Sie die Loopback-Datei %s einhängen?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wo wollen Sie das Gerät %s einhängen?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ich kann diesen Einhängpunkt nicht zurücksetzen, da diese Partition als \n"
-"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Errechne die Grenzen des FAT Dateisystems"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Neuberechnen der Größe"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Die Größe dieser Partition kann ich nicht ändern"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Sie sollten ein Backup sämtlicher Daten dieser Partition erstellen"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Durch Veränderung der Partitionsgröße von %s, gehen sämtliche Daten darauf "
-"verloren"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Wählen Sie die neue Größe"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Neue Größe in MB:"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Zu welcher Platte wollen Sie wechseln?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Zu welchem Sektor wollen Sie wechseln?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "wechsele"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Bewege Partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Wählen Sie einen vorhandenen RAID"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "Neu"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Wählen Sie einen vorhandenen LVM"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM Name?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Diese Partition kann nicht als Loopback verwendet werden"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Name der Loopback-Datei: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dateinamen angeben"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Diese Datei wird bereits von einer anderen Loopback-Verknüpfung verwendet, "
-"wählen Sie eine andere Datei."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr ""
-"Es existiert bereits eine Datei mit diesem Namen. Soll ich sie verwenden?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Einhäng-Optionen"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Verschiedene"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "Gerät"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "Level"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Blockgröße"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vorsicht: Diese Aktion ist gefährlich."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Welcher Partitionstyp?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Es tut mir Leid, aber ich weigere mich, eine „/boot“ Partition \n"
-"hinter dem Zylinder 1024 anzulegen.\n"
-"Entweder verwenden Sie LILO und es wird nicht funktionieren, oder Sie "
-"verwenden \n"
-"LILO nicht, dann benötigen Sie keine „/boot“ Partition."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Die Partition, die Sie als Verzeichnisbaumwurzel (/) ausgewählt haben, ist "
-"physikalisch hinter dem 1024ten Zylinder Ihrer Festplatte gelegen und Sie "
-"haben keine „/boot“ Partition eingerichtet. Falls Sie den LILO "
-"Betriebssystemstarter einsetzen wollen, vergessen Sie bitte nicht, eine „/"
-"boot“ Partition anzulegen!"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Sie haben eine Software-RAID-Partition als Verzeichnisbaumwurzel "
-"ausgewählt. \n"
-"Zur Zeit kann kein Betriebssystemstarter damit ohne Verwendung einer \n"
-"„/boot“-Partition arbeiten. Sie sollten also daran denken, eine solche \n"
-"Partition zu erstellen."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Die Partitionstabelle der Platte „%s“ wird gespeichert!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, damit die Veränderungen wirksam werden"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Formatieren der Partition %s, werden sämtliche Daten darauf gelöscht"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiere"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiere Loopback-Datei %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiere Partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Dateien verstecken"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Das Verzeichnis „%s“ enthält bereits Daten\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiere: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Entferne: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Die Partition %s heißt nun %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gerät: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Name: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Anfang: Sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Größe: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s Sektoren"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Zylinder %d bis %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatiert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nicht formatiert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Eingehängt\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback Datei(en):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition wird standardmäßig geladen\n"
-"    (für MS-DOS Boot, nicht jedoch für LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blockgröße %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID Platten %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Dateiname des Loopbacks: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es besteht die Wahrscheinlichkeit,\n"
-"dass es sich um eine Treiber-\n"
-"Partition handelt. Sie sollten sie\n"
-"daher unverändert lassen.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Diese spezielle Start-Partition\n"
-"ist für die Verwendung mehrerer\n"
-"Betriebssysteme auf dem selben\n"
-"Rechner.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Größe: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s Zylinder, %s Köpfe, %s Sektoren\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM Platten %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellen Typ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "auf Bus %d ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Optionen: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Dateisystem-Schlüssel"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Wählen Sie Ihren Dateisystem-Schlüssel (Passwort)"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Die Passwörter stimmen nicht überein"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Schlüssel"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Schlüssel (erneut)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Typ ändern"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Bitte wählen Sie ein Medium"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Server suchen"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatieren von %s schlug Fehl"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
-"formatieren."
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "Das Einhängen der Partition %s in das Verzeichnis %s schlug fehl."
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-"Der Dateisystemcheck (fsck) schlug fehl mit dem Rückgabewert %d oder Signal %"
-"d."
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Fehler beim Aushängen von %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "Einfach"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "mit „/usr“"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"Sie können JFS nicht für Partitionen verwenden, die kleiner als 16MB sind!"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Sie können ReiserFS nicht für Partitionen verwenden, die kleiner als 32MB "
-"sind!"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Einhängpunkte müssen mit einem / beginnen."
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Es gibt bereits eine Partition, mit dem Einhängpunkt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Sie können kein logisches LVM Medium für den Einhängpunkt %s verwenden."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dieses Verzeichnis muss in der Verzeichnisbaumwurzel bleiben"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Sie benötigen ein echtes GNU/Linux Dateisystem (Ext2, ReiserFS) für \n"
-"diesen Einhängpunkt.\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Sie können kein verschlüsseltes Medium für den Einhängpunkt %s verwenden."
-
-# ../../diskdrak1
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nicht genug freier Platz, damit ich selbst Partition anlegen kann."
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nichts zu tun."
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fehler beim Öffnen von %s zum Schreiben: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ein Fehler ist aufgetreten - es wurden keine gültigen Geräte gefunden, auf "
-"denen neue Dateisysteme erstellt werden können. Bitte überprüfen Sie Ihre "
-"Hardware(-Konfiguration) auf mögliche Fehler und falsche Einstellungen."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Sie haben keine Partitionen!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
-"Benutzerkennzeichen hat eigene Präferenzen (Grafische Umgebung,\n"
-"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
-"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
-"können Sie im Benutzerhandbuch nachsehen. Sie können mehrere normale\n"
-"Benutzerkonten einrichten, im Gegensatz zum „privilegierten“ Kennzeichen:\n"
-"»root«, das einmalig ist. Im Gegensatz zu »root« können diese normalen\n"
-"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen verändern. Sie\n"
-"können sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
-"Zugang zu Ihrem GNU/Linux-System gewähren wollen. Erstellen Sie sich ein\n"
-"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
-"diesen Rechner nutzt. Sie sollten nicht ständig mit dem privilegierten\n"
-"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
-"schweren Fehler als einfacher Benutzer machen, dann können Sie maximal\n"
-"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
-"\n"
-"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
-"notwendigerweise Ihr richtiger Name sein. „DrakX“ wird das erste Wort, das\n"
-"Sie eingegeben haben, in das Feld „Benutzerkennzeichen“ eintragen. Dies ist\n"
-"der Name, den Sie zum Anmelden für dieses Kennzeichen benötigen. Natürlich\n"
-"können Sie ihn hier nach Belieben verändern. Dann geben Sie Ihrem Konto ein\n"
-"Passwort. Für ein Benutzerkennzeichen ist dieses zwar nicht von so\n"
-"herausragender Bedeutung wie das für »root«, doch Sie sollten trotzdem\n"
-"etwas Sorgfalt walten lassen. Immerhin sind es Ihre Daten...\n"
-"\n"
-"Klicken Sie auf „Benutzer akzeptieren“, um das Kennzeichen zu erstellen.\n"
-"Anschließend können Sie direkt weitere Benutzer hinzufügen. Wenn Sie allen\n"
-"Kennzeichen erstellt haben, klicken Sie auf „Fertig“.\n"
-"\n"
-"Durch Anwahl der Schaltfläche „Fortgeschritten“ haben Sie auch die\n"
-"Möglichkeit, die Standard-Shell dieses Benutzers ändern (normalerweise ist\n"
-"dies die „Bash“)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Oben sehen Sie die auf Ihrer Festplatte gefundenen Linux-Partitionen. Als\n"
-"normaler Linuxanwender können Sie problemlos die Vorschläge des Assistenten\n"
-"übernehmen. Sollten Sie diesen Vorschlag ändern, müssen Sie zumindest eine\n"
-"Partition als Verzeichnisbaumwurzel („/“) definieren. Wählen Sie keine zu\n"
-"kleine Partition, da sie sonst nicht genug Software installieren können.\n"
-"Falls Sie Ihre persönlichen Daten auf einer getrennten Partition speichern\n"
-"möchten, müssen Sie eine Linux-Partition für ihre persönlichen\n"
-"Verzeichnisse („/home“) definieren (Dies geht natürlich nur, wenn Sie mehr\n"
-"als nur eine Linux Partition haben).\n"
-"\n"
-"Alle Partitionen werden folgendermaßen aufgeführt: „Name“, „Kapazität“\n"
-"\n"
-"„Name“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“ und\n"
-"„Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
-"„sd“ wenn es eine SCSI Platte ist.\n"
-"\n"
-"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
-"Platten bedeutet:\n"
-"\n"
-" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
-"Festplatte am Bus“, etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Da die Mandrake Linux-Distribution stetig wächst, wurde sie in mehrere\n"
-"CD-ROMs unterteilt. Es kann daher vorkommen, dass „DrakX“ Pakete von\n"
-"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
-"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
-"installieren wollen. Es gibt tausende von Paketen für Mandrake Linux, und\n"
-"Sie müssen sie nicht alle auswendig kennen.\n"
-"\n"
-"Wenn Sie eine klassische CD-ROM-Installation vornehmen, werden Sie zuerst\n"
-"nach den Ihnen zur Verfügung stehenden CDs gefragt (nur im Expertenmodus).\n"
-"Markieren Sie die Zeilen anhand der CDs die Sie vorliegen haben und klicken\n"
-"Sie auf die Schaltfläche „OK“.\n"
-"\n"
-"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
-"wiederum enthalten vier Abschnitte:\n"
-"\n"
-" * „Arbeitsplatzrechner“: Falls Ihr Rechner als Arbeitsplatzrechner\n"
-"verwendet werden soll, markieren Sie eine oder mehrere Gruppen.\n"
-"\n"
-" * „Entwicklungsplattform“: Falls Sie mit Ihrem Rechner programmieren\n"
-"wollen, sollten Sie diese Gruppe markieren.\n"
-"\n"
-" * „Server“: Wenn Ihre Maschine ein Server werden soll, können Sie hier die\n"
-"wichtigsten Dienste auswählen, die auf Ihren Rechner installiert werden\n"
-"sollen.\n"
-"\n"
-" * „Grafische Oberfläche“: Wählen Sie hier Ihre bevorzugte grafische\n"
-"Arbeitsoberfläche. Wenn Sie eine grafische Oberfläche verwenden wollen, so\n"
-"müssen Sie hier zumindest eine Gruppe auswählen.\n"
-"\n"
-"Wenn Sie die Maus über eine Gruppe bewegen, erhalten Sie einen kurzen\n"
-"erklärenden Text über die Gruppe. Falls Sie bei einer Installation alle\n"
-"Markierungen entfernen, erscheint ein Dialog, in dem Sie zwischen\n"
-"verschiedenen Minimalinstallationen wählen können.\n"
-"\n"
-" * „Mit X“ Installiert eine rudimentäre grafische Oberfläche;\n"
-"\n"
-" * „Mit minimaler Dokumentation“ Installiert das Basissystem zuzüglich\n"
-"grundlegender Werkzeuge inklusive deren Dokumentation. Dies ist die\n"
-"sinnvollste Wahl für eine Serverinstallation.\n"
-"\n"
-" * „Extrem minimale Installation“ Sie erhalten eine komplett „nackte“\n"
-"Linux-Distribution (speziell auch ohne urpmi!). Es versteht sich von\n"
-"selbst, dass das nur eine Kommandozeileninstallation sein kann.\n"
-"\n"
-"Wenn Sie die Schaltfläche „Fortgeschritten“ anwählen, erhalten Sie die\n"
-"Möglichkeit, eine „Individuelle Paketauswahl“ durchzuführen. Das macht nur\n"
-"Sinn, wenn Sie die Pakete genau kennen oder wenn Sie volle Kontrolle\n"
-"darüber haben wollen, was installiert werden soll.\n"
-"\n"
-"Haben Sie die Installation als „Aktualisierung“ gestartet, können Sie die\n"
-"Markierungen aller Gruppen entfernen, um die Installation neuer Pakete zu\n"
-"vermeiden. Hierdurch werden nur bereits installierte Pakete aktualisiert\n"
-"oder repariert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Schlussendlich erhalten Sie (falls Sie sich für „Individuelle Paketauswahl“\n"
-"entschieden haben) eine Baumliste aller Pakete die zu den von Ihnen\n"
-"gewünschten Gruppen gehören. Diese Pakete sind nach Gruppen und\n"
-"Untergruppen klassifiziert. Beim Durchstöbern des Baums, können Sie\n"
-"Gruppen, Untergruppen oder einzelne Pakete markieren oder deren Markierung\n"
-"entfernen.\n"
-"\n"
-"Sobald Sie ein Paket auswählen, erscheint rechts eine kurze Beschreibung.\n"
-"Sobald Sie die Auswahl abgeschlossen haben, bestätigen Sie das durch\n"
-"Drücken der Schaltfläche „Installation“. Nun beginnt die eigentliche\n"
-"Installation. Falls Sie eine Vielzahl von Paketen installieren wollen,\n"
-"können Sie nun getrost einen Kaffee trinken gehen.\n"
-"\n"
-"!! Es kommt vor, dass Server- und Dienst-Pakete angewählt wurden - entweder\n"
-"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
-"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
-"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
-"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
-"Distribution zusammengestellt wurde, keine Sicherheitslücken oder Fehler in\n"
-"diesen Paketen bekannt waren, ist natürlich nicht auszuschließen, dass\n"
-"später solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
-"hier die Rede ist, wählen Sie sicherheitshalber lieber „Nein“. Falls Sie\n"
-"mit „Ja“ antworten, werden die Dienste und Server installiert und stehen\n"
-"Ihnen nach der Installation standardmäßig zur Verfügung. !!\n"
-"\n"
-"Die Option „Automatische Abhängigkeiten“ unterdrückt nur die Warnungen, die\n"
-"erscheinen, wenn das Installationsprogramm Pakete automatisch markiert, um\n"
-"Paketabhängigkeiten aufzulösen, wenn Sie ein Paket auswählen.\n"
-"\n"
-"Das kleine Diskettensymbol am unteren Rand der Liste ermöglicht es Ihnen,\n"
-"die während einer vorangegangenen Installation gespeicherte Paketauswahl\n"
-"erneut zu verwenden. Durch Betätigen der Schaltfläche öffnen Sie einen\n"
-"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
-"früheren Installation enthält. Um zu erfahren, wie Sie diese Diskette\n"
-"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
-"Installationsschrittes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
-"verbinden wollen, dann wählen Sie bitte die entsprechende Option aus. Bitte\n"
-"schalten Sie jedoch zuvor, falls nötig, die dafür benötigten Geräte ein,\n"
-"damit „DrakX“ sie automatisch erkennen kann.\n"
-"\n"
-"Mandrake Linux bietet Ihnen die Möglichkeit, Ihre Internet-Verbindung\n"
-"bereits während der Installation zu konfigurieren. Zur Auswahl stehen\n"
-"folgende Verbindungsarten: Herkömmliches Modem, ISDN Modem, ADSL\n"
-"Verbindung, Kabelmodem oder eine einfache LAN Verbindung (Ethernet).\n"
-"\n"
-"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
-"sicher, dass sie die nötigen Parameter von Ihrem Internet Provider oder\n"
-"Systemadministrator erhalten haben.\n"
-"\n"
-"Weitere Einzelheiten, die hier bereits hilfreich sein können, erhalten Sie\n"
-"im Kapitel DrakNet. Falls Sie unsicher sind, warten Sie ab, bis die\n"
-"Installation beendet ist und verwenden Sie danach das beschriebene\n"
-"Programm, um Ihre Verbindung einzurichten.\n"
-"\n"
-"Wenn Sie Ihr Netzwerk erst nach Abschluss der Installation einrichten\n"
-"wollen oder sobald Sie die Konfiguration beendet haben, klicken Sie auf\n"
-"„Abbrechen“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Als nächstes können Sie die Dienste auswählen, die während des\n"
-"Betriebssystemstarts aktiviert werden sollen.\n"
-"\n"
-"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
-"zur Verfügung stehen, angezeigt. Lesen Sie diese Liste sorgfältig durch und\n"
-"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur Verfügung\n"
-"haben wollen.\n"
-"\n"
-"Wenn Sie einen Dienst anwählen, erhalten Sie eine kurze Erklärung dazu.\n"
-"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
-"nicht, verändern Sie am Besten die voreingestellten Markierungen nicht.\n"
-"\n"
-"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so müssen Sie an\n"
-"dieser Stelle besonders vorsichtig sein: wählen Sie alle Dienste ab, die\n"
-"Sie nicht benötigen. Denken Sie daran, dass etliche Dienste eine\n"
-"potentielle Einbruchstelle in das System von außen darstellen, wenn diese\n"
-"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
-"wirklich brauchen! !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und übersetzt diese anhand\n"
-"der Zeitzone in Ihre lokale Zeit.\n"
-"\n"
-"Da MicrosoftWindows(TM) nicht sinnvoll mit GMT umgehen kann, müssen Sie\n"
-"„Nein“ wählen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
-"auf Ihrem Rechner „beherbergen“\n"
-"\n"
-"Die Verwendung der Option „Automatische Zeit-Synchronisation“ reguliert\n"
-"Ihre Uhr, indem sie Verbindung mit einem Zeitserver im Internet aufnimmt.\n"
-"Wählen Sie aus der Liste einen Server in Ihrer Nähe. Damit die funktioniert\n"
-"benötigen Sie eine ständige Internetverbindung."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (das X Window System) ist das Herz der grafischen Benutzeroberfläche von\n"
-"GNU/Linux. Es bildet die Grundlage für die Vielzahl grafischer\n"
-"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
-"AfterStep oder WindowMaker). Auch hier wird „DrakX“ die Konfiguration\n"
-"soweit wie möglich selbstständig vollziehen.\n"
-"\n"
-"Sollten Sie nicht gerade sehr alte, sehr neue oder exotische Grafikhardware\n"
-"einsetzen, wird „DrakX“ die Konfiguration erfolgreich durchführen und\n"
-"anschließend die grafische Oberfläche mit der bestmöglichen Auflösung\n"
-"starten! Es erscheint ein Testfenster und Sie werden anschließend gefragt,\n"
-"ob die Anzeige einwandfrei war.\n"
-"\n"
-"Falls Sie eine „Experte“n-Installation vornehmen, werden Sie in den\n"
-"folgenden Schritten von dem „DrakX“-Konfigurationsassistenten begleitet.\n"
-"\n"
-"Falls das Bild korrekt dargestellt wird, wählen Sie bitte die Schaltfläche\n"
-"„Ja“ an, „DrakX“ wird dann mit dem nächsten Schritt der Installation\n"
-"fortfahren. Sollte der Schirm aus irgendwelchen Gründen nicht lesbar sein,\n"
-"müssen Sie nur 10 Sekunden warten. Anschließend sollte wieder das\n"
-"Konfigurationsmenü erscheinen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Es kann Ihnen passieren, dass der erste Versuch noch nicht korrekt ist (Der\n"
-"Schirm ist zu klein, liegt zu weit rechts oder links...). Daher werden Sie\n"
-"selbst dann mit der Frage konfrontiert, wenn der „DrakX“-Server sich\n"
-"starten lies, „DrakX“ also davon ausgehen könnte, dass alles in Ordnung\n"
-"ist. Sie erhalten daher eine Liste von gültigen Modi, aus denen Sie\n"
-"versuchen sollten den besten auszuwählen.\n"
-"\n"
-"Sollten alle stricke reißen, und „DrakX“ immer noch nicht laufen, wählen\n"
-"Sie einfach im Untermenü „Grafikkarte ändern“, den Punkt „Nicht\n"
-"aufgeführt“. Wenn Sie dann nach dem Server gefragt werden, wählen Sie den\n"
-"„FBDev“: Diese Variante sollte mit allen modernen Grafikkarten\n"
-"funktionieren. Ein „Nochmals testen“ sollte Gewissheit bringen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Letztlich werden Sie gefragt, ob sie direkt in die grafische Oberfläche\n"
-"starten wollen. Diese Frage wird auch erscheinen, wenn Sie das Testen der\n"
-"Konfiguration übersprungen haben. Schlug die Konfiguration der grafischen\n"
-"Umgebung fehl oder wollen Sie den Rechner als Server laufen lassen, geben\n"
-"Sie natürlich „Nein“ an."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Die Mandrake LinuxCD-ROM hat einen eingebauten Rettungsmodus. Sie erreichen\n"
-"ihn durch Starten von CD-ROM, und Drücken von »F1« bei Bootbeginn. Geben\n"
-"Sie dann »rescue« an der Eingabeaufforderung ein. Falls Ihr Rechner nicht\n"
-"von CD-ROM starten kann, sollten Sie diesen Punkt unbedingt aus zwei\n"
-"Gründen abarbeiten:\n"
-"\n"
-" * Wenn „DrakX“ den Betriebssystemstarter installiert, schreibt es den\n"
-"Boot-Sektor (MBR) Ihrer primären Festplatte neu (außer Sie wollen einen\n"
-"anderen Betriebssystemstarter verwenden), damit Sie die verschiedenen,\n"
-"vorhandenen Betriebssysteme starten können (etwa Windows und GNU/Linux).\n"
-"Sollten Sie etwa Windows neu installieren, wird dieses - ohne Sie zu fragen\n"
-"- Ihren Boot-Sektor überschreiben. Somit werden Sie Ihr GNU/Linux nicht\n"
-"mehr starten können! Mit einer Startdiskette können Sie Ihr\n"
-"GNU/Linux-System dann trotzdem hochfahren und diese Änderungen rückgängig\n"
-"machen.\n"
-"\n"
-" * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
-"GNU/Linux von der Festplatte unmöglich machen, ist diese Startdiskette so\n"
-"ziemlich die einzige Möglichkeit, auf Ihr System zuzugreifen. Zudem enthält\n"
-"sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
-"Systemfehlern (nach einem Stromausfall, einen unglücklichen Tippfehler in\n"
-"einem Passwort, etc.) helfen werden.\n"
-"\n"
-"Wenn Sie diesen Schritt anwählen, wird „DrakX“ Sie bitten, eine Diskette in\n"
-"ein Laufwerk zu legen. Die Diskette sollte natürlich leer sein (zumindest\n"
-"keine relevanten Daten enthalten). Sie muss nicht formatiert sein, „DrakX“\n"
-"kümmert sich um alles."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Sie müssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
-"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
-"Betriebssystem alles belegt, müssen die Platte(n) neu partitioniert werden.\n"
-"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
-"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
-"werden kann.\n"
-"\n"
-"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
-"für unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
-"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
-"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
-"Entscheidung.\n"
-"\n"
-"Wenn Sie die Installation im Expertenmodus durchführen, werden Sie nun das\n"
-"Mandrake Linux Partitionier-Werkzeug kennen lernen: „DiskDrake“. Es erlaubt\n"
-"Ihnen Ihre Partitionen genau auf Ihre Bedürfnisse abzustimmen. Falls Sie\n"
-"keine Ahnung haben, wie Sie die Festplatte partitionieren sollen, wählen\n"
-"Sie die Schaltfläche „Assistent“ und überlassen diesem damit die gesamte\n"
-"Arbeit.\n"
-"\n"
-"Sollten Sie bereits Partitionen haben (etwa von einer alten GNU/Linux\n"
-"Installation oder solche, die mit einem anderen Partitionierungswerkzeug\n"
-"erstellt wurden), die Sie für die Installation von Mandrake Linux verwenden\n"
-"wollen, wählen Sie diese hier einfach aus.\n"
-"\n"
-"Falls noch keine Partitionen existieren, müssen Sie sie erstellen.\n"
-"Verwenden Sie dafür obigen Assistenten. Abhängig vom aktuellen Zustand\n"
-"Ihrer Platte(n) haben Sie verschiedene Alternativen:\n"
-"\n"
-" * „Freien Platz verwenden“: Dies führt einfach dazu, dass Ihre leere(n)\n"
-"Festplatte(n) automatisch partitioniert werden; Sie müssen sich also um\n"
-"nichts weiter kümmern.(*)\n"
-"\n"
-" * „Verwende existierende“: Der Assistent hat eine oder mehrere "
-"existierende\n"
-"Linux Partitionen auf Ihrer Platte gefunden. Wählen Sie diese Schaltfläche,\n"
-"falls Sie sie behalten wollen.\n"
-"\n"
-" * „Komplette Platte löschen“: Falls Sie alle Daten Ihrer Platte verlieren,\n"
-"und sie durch Ihr neues Mandrake Linux System ersetzen wollen, wählen Sie\n"
-"diese Schaltfläche. Beachten Sie, dass dieser Schritt nicht rückgängig\n"
-"gemacht werden kann.\n"
-"\n"
-" * „Freien Platz der Windows Partition verwenden“: Falls der gesamte\n"
-"Plattenplatz aktuell für MicrosoftWindows(TM) verschwendet ist, müssen Sie\n"
-"für Linux Platz schaffen. Um dies zu erreichen, können Sie entweder Ihre\n"
-"MicrosoftWindows(TM) Partition(en) samt Daten löschen (siehe „Komplette\n"
-"Platte löschen“ oder „Experten-Modus“) oder Ihre Windows Partition\n"
-"verkleinern. Letzteres geht ohne Datenverlust. Sie sollten diese Variante\n"
-"wählen, falls Sie beide Betriebssysteme (Windows und Mandrake Linux)\n"
-"nebeneinander nutzen wollen.\n"
-"\n"
-"   Bevor Sie sich für diese Variante entscheiden, sei hier noch einmal "
-"betont,\n"
-"dass das bedeutet, Sie haben weniger Platz für Windows als momentan.\n"
-"\n"
-" * „Windows(TM) löschen“: Bei dieser Variante werden alle Windows\n"
-"Partitionen gelöscht und die Platte(n) komplett neu partitioniert.\n"
-"\n"
-"   !! Alle Daten auf den Platten gehen dadurch verloren! !!\n"
-"\n"
-" * „Expertenmodus“: Wenn Sie Ihre Festplatte selber von Hand partitionieren\n"
-"wollen, dann können Sie diese Option wählen. Seien Sie bitte sehr\n"
-"sorgfältig, wenn Sie diese Lösung wählen, da Sie zwar alle möglichen\n"
-"Einstellungen vornehmen, aber gleichzeitig auch sehr leicht Daten verlieren\n"
-"können. Diese Option ist nur geeignet, wenn Sie wissen, was Sie tun.\n"
-"\n"
-"(*) In Deutschland ist es quasi unmöglich, Komplettrechner mit leeren\n"
-"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
-"dürfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
-"proprietäre kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
-"dass es freie und sogar kostenlose Alternativen gibt. Jeder Käufer eines\n"
-"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
-"aus Redmond gleichgesetzt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
-"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart können Sie\n"
-"zwischen den auf Ihrer Platte installierten Betriebssystemen auswählen.\n"
-"Klicken Sie nur noch auf „OK“ und das System wird neu gestartet.\n"
-"\n"
-"Die Schaltfläche „Fortgeschritten“ liefert zwei weitere Schaltflächen:\n"
-"\n"
-" * „Erstellen einer Auto-Installationsdiskette“: Hiermit können Sie eine\n"
-"Installationsdiskette erstellen, mit deren Hilfe Sie eine identische\n"
-"automatische Installation ohne Interaktion eines Administrators\n"
-"durchzuführen können.\n"
-"\n"
-"   Es gibt zwei verschiedene Alternativen, nachdem Sie diese Schaltfläche\n"
-"aktiviert haben:\n"
-"\n"
-"    * „Erneut abspielen“: Diese Installation ist nur teilweise automatisch, "
-"da\n"
-"der Partitionierungsschritt (aber nur dieser!) immer noch interaktiv\n"
-"vonstatten geht.\n"
-"\n"
-"    * „Automatisiert“: Vollautomatische Installation: Die Festplatte wird\n"
-"vollständig reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
-"\n"
-"   Diese Funktion ist besonders nützlich, wenn man eine Menge von "
-"identischer\n"
-"Rechner einrichten will. Weitere Informationen erhalten Sie auch auf der\n"
-"Seite Auto install\n"
-"\n"
-" * „Paketauswahl speichern“: (*) Sie speichern damit die Paketauswahl, die\n"
-"Sie vorher getroffen haben. Wenn Sie später eine erneute Installation\n"
-"vornehmen wollen, legen Sie einfach die Diskette ins Laufwerk und starten\n"
-"Sie die Installation mittels [F1] an der ersten Eingabeaufforderung. Geben\n"
-"Sie dann »linux defcfg=\"floppy\"« ein.\n"
-"\n"
-"(*) Sie benötigen eine FAT formatierte Diskette (Mittels „mformat a:“\n"
-"können Sie unter GNU/Linux eine solche erstellen)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Alle neu angelegten Partitionen müssen formatiert (= ein Dateisystem darauf\n"
-"erzeugt) werden, bevor Sie sie verwenden können.\n"
-"\n"
-"Möglicherweise wollen Sie auch einige bereits existierende Partitionen\n"
-"formatieren, um alle darauf vorhandenen Daten zu löschen. Falls ja,\n"
-"markieren Sie diese ebenfalls.\n"
-"\n"
-"Es sei angemerkt, dass bereits existierende Partitionen nicht erneut\n"
-"formatiert werden müssen. Sie sollten Partitionen, die Teile des\n"
-"Betriebssystems enthalten neu formatieren (etwa „/“, „/usr“ oder „/var“),\n"
-"Partitionen mit Ihren privaten Daten (normalerweise „/home“) sollten Sie\n"
-"jedoch nicht neu formatieren.\n"
-"\n"
-"Seien Sie in diesem Schritt sehr sorgfältig. Nach dem Formatieren einer\n"
-"Partition ist der komplette Inhalt unwiederbringlich gelöscht!\n"
-"\n"
-"Wählen Sie „OK“, sobald Sie bereit sind die Partitionen zu formatieren.\n"
-"\n"
-"Wählen Sie „Abbruch“, falls Sie andere Partitionen verwenden wollen, um Ihr\n"
-"Mandrake Linux darauf zu installieren.\n"
-"\n"
-"Wählen Sie „Fortgeschritten“, um die Möglichkeit zu erhalten, Partitionen\n"
-"anzugeben, die auf defekte Blöcke untersucht werden sollen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ihre neue Mandrake Linux Distribution wird nun installiert. Das dauert\n"
-"einige Minuten (abhängig von der Anzahl zu installierender Pakete und der\n"
-"Geschwindigkeit Ihres Rechners).\n"
-"\n"
-"Bitte haben Sie etwas Geduld."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandrake Linux\n"
-"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
-"entdeckt und beseitigt wurden oder da in Paketen Sicherheitslücken entdeckt\n"
-"wurden, für die bereits Lösungen existieren. Um von diesen aktualisierten\n"
-"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
-"Internet nachzuladen. Betätigen Sie die Schaltfläche „Ja“, wenn Sie einen\n"
-"Internetzugang haben, um die Pakete zu installieren, andernfalls betätigen\n"
-"Sie die Schaltfläche „Nein“. Sie können diese Pakete natürlich auch\n"
-"jederzeit nach der Installation noch installieren.\n"
-"\n"
-"Betätigen der Schaltfläche „Ja“ zeigt Ihnen eine Liste von Servern, von\n"
-"denen Sie die Aktualisierungen herunterladen können. Wählen Sie einen in\n"
-"Ihrer Nähe. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
-"die Auswahl und bestätigen Sie diese durch Betätigen von „Installieren“.\n"
-"Die Pakete werden nun angefordert und installiert. Sollten Sie das nicht\n"
-"wünschen, betätigen Sie einfach die Schaltfläche „Abbruch“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Lesen Sie bitte aufmerksam die die Lizenz, bevor Sie fortfahren. Sie\n"
-"umfasst die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen\n"
-"Punkten zustimmen, betätigen Sie bitte die Schaltfläche „Zurückweisen“, um\n"
-"die Installation abzubrechen. Um mit der Installation fortzufahren\n"
-"betätigen Sie die Schaltfläche „Akzeptieren“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nun ist es an der Zeit, die gewünschte Sicherheitsebene für Ihr System\n"
-"festzulegen. Als Faustregel sollte hier dienen: Je zugänglicher die\n"
-"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
-"höher sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
-"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
-"gewisse Befehle/Abläufe durchgeführt werden können. Ausführlichere\n"
-"Erläuterungen zu den verschiedenen Sicherheitsebenen erhalten Sie im\n"
-"Kapitel MSEC des Referenzhandbuchs.\n"
-"\n"
-"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
-"Standardeinstellung bei."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Sie müssen nun entscheiden auf welche Partition(en) Ihr neues Mandrake\n"
-"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
-"(etwa von einer früheren Installation von GNU/Linux oder durch das Erzeugen\n"
-"mit einem anderen Partitionierungswerkzeug), können Sie diese verwenden.\n"
-"Anderenfalls müssen Sie Partitionen definieren.\n"
-"\n"
-"Um Partitionen zu erzeugen müssen Sie erst eine Festplatte wählen. Sie\n"
-"können die Platte wählen in dem Sie „hda“ für die erste IDE-Platte wählen,\n"
-"„sda“ für die erste SCSI-Platte, usw.\n"
-"\n"
-"Um die gewählte Platte zu partitionieren stehen folgende Möglichkeiten zur\n"
-"Verfügung:\n"
-"\n"
-" * „Alles löschen“: Betätigen dieser Schaltfläche löscht alle Partitionen\n"
-"auf der markierten Festplatte.\n"
-"\n"
-" * „Automatisches Erstellen“: Diese Schaltfläche erstellt automatisch Ext2-\n"
-"und Swap-Partitionen im ungenutzten Bereich Ihrer Festplatte.\n"
-"\n"
-" * „Partitionstabelle retten“: Falls Ihre Partitionstabelle defekt ist,\n"
-"können Sie durch Drücken dieser Schaltfläche versuchen Sie wieder\n"
-"herzustellen. Seien Sie vorsichtig und denken Sie immer daran, dass dieser\n"
-"Versuch misslingen kann.\n"
-"\n"
-" * „Rückgängig“: Mit dieser Schaltfläche können Sie alle Einstellungen\n"
-"rückgängig machen.\n"
-"\n"
-" * „Neu laden“: Sie können durch Betätigen dieser Schaltfläche alle\n"
-"Einstellungen rückgängig machen und die (noch bestehende) Partitionstabelle\n"
-"neu laden.\n"
-"\n"
-" * „Assistent“: Falls Sie keine Ahnung haben wie Sie die Festplatte\n"
-"partitionieren sollen, wählen Sie diese Schaltfläche. Sie überlassen damit\n"
-"die gesamte Arbeit unserem Assistenten, der mittels „Abra Kadabra“(TM) Ihre\n"
-"Platte partitioniert.\n"
-"\n"
-" * „Von Diskette wiederherstellen“: Falls Sie Ihre Partitionstabelle vor\n"
-"Beginn auf eine Diskette gespeichert haben, können Sie sie mittels dieser\n"
-"Schaltfläche wieder zurückschreiben.\n"
-"\n"
-" * „Auf Diskette speichern“: Falls Sie Ihre aktuelle Partitionstabelle auf\n"
-"Diskette speichern wollen, falls Sie sie später wiederherstellen wollen,\n"
-"können Sie das mit Hilfe dieser Schaltfläche tun.\n"
-"\n"
-" * „Fertig“: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
-"aktivieren Sie diese Schaltfläche, um Ihre Änderungen zu speichern.\n"
-"\n"
-"Information: Sie können alle Einstellungen per Tastatur vornehmen. Sie\n"
-"können sich mittels [Tab] und den Pfeiltasten bewegen.\n"
-"\n"
-"Wenn eine Partition ausgewählt ist, können Sie mittels:\n"
-"\n"
-" * [Strg]-[C] - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
-"Partition sind)\n"
-"\n"
-" * [Strg]-[D] - die Partition löschen\n"
-"\n"
-" * [Strg]-[M] - dem Einhängpunkt festlegen\n"
-"\n"
-"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
-"eine mindestens 1 MB große HFS Start-Partition für den\n"
-"Betriebssystemstarter „Yaboot“ erstellen. Wenn Sie diese Partition etwas\n"
-"größer dimensionieren, etwa 50 MB, haben Sie einen geeigneten Platz, um\n"
-"einen Rettungskern samt RamDisk abzulegen, um in Notfällen starten zu\n"
-"können."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Es wurde mehr als nur eine MicrosoftWindows(TM) Partition auf Ihrer Platte\n"
-"gefunden. Bitte wählen Sie welche Sie verkleinern wollen, um Ihr neues\n"
-"Betriebssystem Mandrake Linux installieren zu können.\n"
-"\n"
-"Zu Ihrer Information sind alle Partitionen folgendermaßen aufgeführt:\n"
-"„Linuxname“, „Windowsname“, „Kapazität“.\n"
-"\n"
-"„Linuxname“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“\n"
-"und „Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
-"„sd“ wenn es eine SCSI Platte ist.\n"
-"\n"
-"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
-"Platten bedeutet:\n"
-"\n"
-" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“.\n"
-"\n"
-"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
-"Festplatte am Bus“, etc.\n"
-"\n"
-"„Windowsname“ ist der Laufwerksbuchstabe, wie er von Windows vergeben wird\n"
-"(die erste FAT Partition der ersten Platte heißt „C:“)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Bitte gedulden Sie sich etwas. Es kann einige Minuten dauern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"„DrakX“ fragt Sie nun nach der gewünschten Installationsart. Sie haben die\n"
-"Wahl zwischen einer Standardinstallation („Empfehlenswert“) und einer\n"
-"Variante, in der Sie mehr Einfluss ausüben können („Experte“). Sie müssen\n"
-"sich nun auch entscheiden, ob Sie eine Installation oder eine\n"
-"Aktualisierung einer bereits vorhandenen Mandrake Linux-Version vornehmen\n"
-"wollen. Es ist möglich, die Installation über ein existierendes BS zu\n"
-"installieren und dieses damit zu entfernen. Sie können auch eine\n"
-"Aktualisierung vornehmen, um eine existierende Installation zu reparieren.\n"
-"Wählen Sie:\n"
-"\n"
-" * „Installieren“: Entfernt komplett ältere Versionen von Mandrake Linux,\n"
-"die noch installiert sind um genau zu sein können Sie je nach aktuellem\n"
-"Inhalt Ihrer Platte auch einige ältere Linux- oder anderweitige Partitionen\n"
-"unangetastet behalten.\n"
-"\n"
-" * „Aktualisieren“: Mit dieser Variante können Sie eine existierende\n"
-"Mandrake Linux Version aktualisieren. Die Partitionstabellen sowie die\n"
-"persönlichen Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
-"Installationsschritte werden wie bei einer Installation ausgeführt.\n"
-"\n"
-" * „Nur Pakete aktualisieren“: In dieser Variante werden alle Schritte der\n"
-"Installation, bis auf die Auswahl der zu installierenden Pakete,\n"
-"übersprungen.\n"
-"\n"
-"Je nachdem, wie viel Erfahrung Sie mit GNU/Linux haben, können Sie sich für\n"
-"eine der folgenden Installations- oder Aktualisierungsarten für Ihr\n"
-"Mandrake Linux System entscheiden:\n"
-"\n"
-" * Empfehlenswert: Falls Sie noch nie ein GNU/Linux Betriebssystem\n"
-"installiert haben. Die Installation wird sehr einfach sein und es werden\n"
-"Ihnen nur sehr wenige Fragen gestellt werden.\n"
-"\n"
-" * Experte: Wenn Sie den Umgang mit GNU/Linux „im Schlaf“ beherrschen und\n"
-"hochgranulare Wahlmöglichkeiten wünschen, ist dies Ihre\n"
-"Installationsmethode. Wie bei der benutzerdefinierten Installation können\n"
-"Sie die hauptsächliche Verwendung festlegen: „Arbeitsplatzrechner“,\n"
-"„Entwicklungsplattform“ oder „Server“. Seien Sie sehr vorsichtig, wenn Sie\n"
-"sich für diese Installationsklasse entscheiden. Die Antworten auf einige\n"
-"Fragen können sehr schwierig sein und Auswirkungen auf Sicherheit und\n"
-"Stabilität Ihrer Distribution haben. Wählen Sie diese Installationsklasse\n"
-"also wirklich nur wenn Sie wissen, was Sie tun!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"„DrakX“ wird aufgrund Ihrer Sprachauswahl das für Sie passende\n"
-"Tastaturlayout bereits ausgewählt haben, Sie sollten diesen Schritt\n"
-"eigentlich nicht einmal angezeigt bekommen. Doch vielleicht sind Sie mit\n"
-"dieser Auswahl nicht zufrieden (wenn Sie beispielsweise eine vom Layout\n"
-"abweichende Sprache bevorzugen). Dann gehen Sie zu diesem\n"
-"Konfigurationsschritt zurück und wählen Sie ein passendes Layout aus der\n"
-"Liste.\n"
-"\n"
-"Sollten Sie eine andere als die zur gewählten Sprache gehörende Tastatur\n"
-"verwenden wollen, wählen Sie die Schaltfläche „Mehr“. Sie erhalten dann\n"
-"eine Liste aller unterstützten Tastaturen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Wählen Sie Ihre bevorzugte Sprache für den Installationsvorgang und\n"
-"Systemlaufzeit.\n"
-"\n"
-"Durch Betätigen der Schaltfläche „Fortgeschritten“ erhalten Sie die\n"
-"Möglichkeit, weitere Sprachen auf Ihrem Rechner zu installieren, um diese\n"
-"später verwenden zu können. Wollen Sie etwa Spaniern muttersprachlichen\n"
-"Zugang zu Ihrem System erlauben, wählen Sie deutsch als Hauptsprache in der\n"
-"Liste und im Fortgeschrittenen-Bereich „Spanish|Spain“.\n"
-"\n"
-"Haben Sie eine Sprache markiert und die Wahl mit „OK“ bestätigt, gelangen\n"
-"Sie automatisch zum nächsten Schritt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"„DrakX“ versucht normalerweise die Anzahl Tasten Ihrer Maus zu erkennen.\n"
-"Sollte das nicht möglich sein, so behandelt es Ihre Maus als\n"
-"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt üblicherweise\n"
-"korrekt, ob es sich um eine serielle, eine PS/2- oder um eine USB-Maus\n"
-"handelt.\n"
-"\n"
-"Sollte dies nicht Ihren Vorstellungen entsprechen: Wählen Sie einfach Ihren\n"
-"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
-"\n"
-"Anschließend können Sie die Funktionstüchtigkeit Ihrer Maus überprüfen.\n"
-"Verwenden Sie auch die Knöpfe und gegebenenfalls das Mausrad, um\n"
-"sicherzustellen, dass die festgelegten Einstellungen funktionieren. Falls\n"
-"nicht, klicken Sie auf „Abbrechen“ und wählen einen anderen Treiber aus."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Bitte wählen Sie den richtigen Anschluss aus. Die COM1-Schnittstelle unter\n"
-"Windows wird beispielsweise unter GNU/Linux als „ttyS0“ bezeichnet."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Sie können nun das »root« Passwort für Ihr Mandrake Linux System eingeben.\n"
-"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass sie\n"
-"es korrekt eingegeben haben.\n"
-"\n"
-"»root« ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
-"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
-"ändern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: »root« darf\n"
-"alles! Wählen Sie deshalb das Passwort sehr sorgfältig aus! Unberechtigter\n"
-"Zugang zu diesem Kennzeichen ist extrem gefährlich für die Integrität Ihres\n"
-"Systems und der darauf enthaltenen Daten. Daher müssen Sie auch ein\n"
-"Passwort auswählen, was nicht leicht zu erraten ist; „DrakX“ teilt Ihnen\n"
-"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch möglich ist,\n"
-"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
-"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
-"Betriebssysteme vor Fehlern sicher sind. »root« hat keine Beschränkungen.\n"
-"Er könnte beispielsweise unbeabsichtigterweise alle Daten auf allen\n"
-"Partitionen löschen, weil er unvorsichtigerweise auf die Partitionen selber\n"
-"zugegriffen hat!\n"
-"\n"
-"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
-"mindestens 8 Zeichen lang sein. Es sollte niemals irgendwo aufgeschrieben\n"
-"werden.\n"
-"\n"
-"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
-"es sich ohne großen Aufwand merken können.\n"
-"\n"
-"Sie müssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
-"Versuch könnte sonst zu einem Problem werden, da Sie anschließend das\n"
-"„falsche“ Passwort bei der Verbindung mit dem System eingeben müssten.\n"
-"\n"
-"Im Expertenmodus werden Ihnen zusätzliche Optionen zur Verfügung gestellt.\n"
-"Diese hängen davon ab, ob Sie mit sich mit einem Authentifizierungsserver\n"
-"verbinden wollen oder nicht.\n"
-"\n"
-"Falls in Ihrem Netzwerk das LDAP (oder NIS) Protokoll für die\n"
-"Authentifizierung verwendet wird, wählen Sie bitte den entsprechenden\n"
-"Menüpunkt. Falls Sie nicht wissen, welches Protokoll Sie verwenden, fragen\n"
-"Sie Ihren Netzwerkadministrator.\n"
-"\n"
-"Falls Ihr Rechner nicht an einem administrierten Netzwerk hängt, wählen Sie\n"
-"bitte „Lokale Dateien“ zur Authentifizierung."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"„LILO“ und „grub“ sind Betriebssystemstarter für GNU/Linux. Diese\n"
-"Installationsphase läuft in den meisten Fällen völlig automatisch ab.\n"
-"„DrakX“ analysiert den Bootsektor und ergreift dann die passenden\n"
-"Maßnahmen:\n"
-"\n"
-" * Findet „DrakX“ einen Windows-Bootsektor, ersetzt es ihn durch einen\n"
-"„grub“ oder „LILO“-Bootsektor. Sie erhalten dadurch die Möglichkeit, beim\n"
-"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
-"vorhanden) und Windows auszuwählen;\n"
-"\n"
-" * Findet „DrakX“ einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
-"neuen;\n"
-"\n"
-"Im Zweifelsfall bietet „DrakX“ Ihnen einen Dialog mit verschiedenen\n"
-"Auswahlmöglichkeiten.\n"
-"\n"
-" * „Zu verwendender Betriebssystemstarter“: Hier erhalten Sie drei\n"
-"Alternativen:\n"
-"\n"
-"    * „Grub“: Falls Sie „grub“ (Textmenü) bevorzugen.\n"
-"\n"
-"    * „LILO mit grafischem Menü“: Falls Sie „LILO“ mit seiner grafischen\n"
-"Oberfläche bevorzugen.\n"
-"\n"
-"    * „LILO mit Textmenü“: Falls Sie „LILO“ mit Textmenü als Ihren "
-"Favoriten\n"
-"ansehen.\n"
-"\n"
-" * „Boot Gerät“: Normalerweise müssen Sie hier nichts ändern („/dev/hda“),\n"
-"Sie könnten jedoch den Starter auch auf der zweiten Platte installieren,\n"
-"(„/dev/hdb“) oder sogar auf einer Diskette („/dev/fd0“).\n"
-"\n"
-" * „Wartezeit vorm Starten des Standard Betriebssystems“: Wenn Sie Ihren\n"
-"Rechner neu starten erhalten Sie im Menü der zur Verfügung stehenden BSe\n"
-"eine gewisse Zeit um auszuwählen, was Sie starten möchten. Sollten Sie\n"
-"während dieser Zeit keine Wahl getroffen haben, wird Ihr Standard-BS\n"
-"gestartet.\n"
-"\n"
-"!! Machen Sie sich klar, dass Sie sich selbst darum kümmern müssen,\n"
-"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
-"Betriebssystemstarter installieren (durch Auswahl von „Abbruch“). Stellen\n"
-"Sie auch sicher, dass Sie wissen was Sie tun, wenn Sie hier Einstellungen\n"
-"verändern... !!\n"
-"\n"
-"Durch wählen der Schaltfläche „Fortgeschritten“ erhalten Sie etliche\n"
-"Optionen, die dem fortgeschrittenen Anwender vorbehalten bleiben.\n"
-"\n"
-"Mandrake Linux installiert normalerweise seinen eigenen\n"
-"Betriebssystemstarter, der Sie sowohl GNU/Linux, als auch alle anderen\n"
-"installierten Betriebssysteme starten lässt.\n"
-"\n"
-"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
-"so wird dieses sofern es erkannt wird automatisch zu dem Startmenü\n"
-"hinzugefügt. Hier können Sie noch einige Feineinstellungen für die\n"
-"bestehenden Optionen vornehmen. Markieren Sie einen bestehenden Eintrag und\n"
-"betätigen Sie die Schaltfläche „Ändern“, um ihn anzupassen oder zu löschen;\n"
-"„Hinzufügen“ erzeugt einen neuen Eintrag und „Fertig“ bringt Sie zum\n"
-"nächsten Installationsschritt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"„LILO“ (der LInux LOader) und „grub“ sind Betriebssystemstarter: Diese\n"
-"Programme starten entweder GNU/Linux oder die anderen Betriebssysteme, die\n"
-"auf Ihrem Rechner vorhanden sind. Normalerweise erkennen diese Werkzeuge\n"
-"alle existierenden Betriebssysteme korrekt und bieten Sie als\n"
-"Startalternativen an. Ist dies einmal nicht der Fall, können Sie hier\n"
-"manuell helfend eingreifen. Seien Sie jedoch vorsichtig, dass sie die\n"
-"korrekten Parameter eingeben.\n"
-"\n"
-"Eventuell möchten Sie anderen Anwendern nicht die Möglichkeit geben, diese\n"
-"anderen Betriebssysteme zu verwenden, in diesem Fall können Sie den\n"
-"entsprechenden Eintrag einfach löschen. Das hat jedoch zur Folge, dass sie\n"
-"eine Startdiskette benötigen, um diese Betriebssysteme in Zukunft starten\n"
-"zu können."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sie müssen nun entscheiden, wo die Informationen zum Starten Ihrer\n"
-"GNU/Linux Distribution erstellt werden sollen.\n"
-"\n"
-"Sofern Sie nicht genau wissen, was sie machen sollen, wählen Sie „Erster\n"
-"Sektor der Platte (MBR)“"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Sie können nun ein Drucksystem wählen. Wo andere Betriebssysteme Ihnen nur\n"
-"eins bieten, bietet Mandrake Linux Ihnen drei:\n"
-"\n"
-" * „pdq“ - Es steht für „print, don't queue“ (engl. für „Drucken ohne\n"
-"Warteschlange“). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
-"hängt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
-"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
-"dabei aber extrem langsam. Wählen Sie „pdq“, wenn Sie ein GNU/Linux Neuling\n"
-"sind. Sie können diese Wahl später immer wieder ändern, indem Sie\n"
-"PrinterDrake im Mandrake Kontrollzentrum starten und dort die Schaltfläche\n"
-"„Expertenmodus“ betätigen.\n"
-"\n"
-" * „CUPS“ - Mit dem „Common Unix Printing System“ (engl. für „Allgemeines\n"
-"Unix-Drucksystem“) können Sie ebenso gut um auf Ihrem direkt\n"
-"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
-"auf der anderen Seite der Welt hängt. Es ist einfach zu bedienen und kann\n"
-"sowohl als Server als auch als Klient für das alte „lpd“-Drucksystem\n"
-"verwendet werden - Es ist somit rückwärtskompatibel. Es ist sehr mächtig,\n"
-"in seiner Grundeinstellung verhält es sich jedoch genau wie „pdq“. Wenn Sie\n"
-"einen „lpd“ Server benötigen, müssen Sie einfach nur den „cups-lpd“ Dämon\n"
-"starten. „CUPS“ bietet grafische Konfigurations- und Druckmenüs.\n"
-"\n"
-" * „LPRng“ - „Line Printer Daemon new generation“ (engl. für\n"
-"„Zeilendrucker-Dämon - Neue Generation“). Dieses System bietet etwa das\n"
-"gleiche, was die beiden vorherigen können, es erlaubt Ihnen jedoch auch auf\n"
-"Drucker in Novell Netzwerken zuzugreifen, da es das IPX Protokoll\n"
-"beherrscht. Falls Sie das benötigen, verwenden Sie LPRng. Andernfalls ist\n"
-"„CUPS“ vorzuziehen, da es benutzerfreundlicher ist und in\n"
-"Nicht-IPX-Netzwerken besser funktioniert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"„DrakX“ versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
-"Anderem sucht „DrakX“ auch nach PCISCSI-Karten, die es kennt, um sie\n"
-"automatisch mit dem richtigen Treiber einzubinden.\n"
-"\n"
-"Falls Sie über keinen SCSI Adapter verfügen, es sich um einen ISASCSI\n"
-"Adapter handelt oder um einen PCISCSI Adapter, bei dem „DrakX“ nicht weiß,\n"
-"welcher Treiber funktioniert, werden Sie gebeten, „DrakX“ zu helfen.\n"
-"\n"
-"Ist in Ihrem Rechner kein SCSI Adapter, wählen Sie einfach „Nein“. Sollten\n"
-"Sie Sich für „Ja“ entscheiden, erscheint eine Liste, aus der Sie Ihren\n"
-"Adapter auswählen können.\n"
-"\n"
-"Mussten Sie den Adapter aus der Liste wählen, fragt „DrakX“ Sie, ob Sie dem\n"
-"Modul Optionen übergeben wollen. Sie können „DrakX“ ruhig erlauben, erst\n"
-"einmal selbst zu versuchen, diese herauszufinden. In den meisten Fällen\n"
-"funktioniert das.\n"
-"\n"
-"Falls nicht, müssen Sie die Optionen angeben. Schauen Sie im\n"
-"Installationshandbuch, wie Sie diese Informationen erhalten können: etwa\n"
-"unter Windows (sofern das auf Ihren Rechner installiert ist), aus den\n"
-"Handbüchern, die sie mit dem Adapter erhalten haben oder von den Web-Seiten\n"
-"des Hardware-Anbieters (sofern Sie einen WWW-Zugang haben)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Sie können weitere „Yaboot“ Einträge angeben, etwa für andere\n"
-"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
-"\n"
-"Für ein anderes BS können Sie nur einen Namen und die Start-Partition\n"
-"angeben.\n"
-"\n"
-"Für Linux gibt es einige Parameter:\n"
-"\n"
-" * „Identifikator“: Es handelt sich um den Namen, den Sie an der „Yaboot“\n"
-"Eingabeaufforderung angeben müssen, um diese Alternative zu wählen.\n"
-"\n"
-" * „Kern“: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
-"handelt es sich um „vmlinuz“ oder eine Variante von „vmlinuz“ mit einer\n"
-"Versionsnummer.\n"
-"\n"
-" * „Verzeichnisbaumwurzel“: Die Verzeichnisbaumwurzel „/“ Ihrer Linux\n"
-"Installation.\n"
-"\n"
-" * „Übergeben“: Auf Apple Hardware, wird die Übergabemöglichkeit weiterer\n"
-"Kernparameter häufig verwendet, um die Grafikausgabe richtig zu\n"
-"konfigurieren oder die Tastaturemulation der Mausknöpfe einzuschalten, da\n"
-"klassische Apple-Mäuse von Hause aus mit 2 fehlenden Maustasten\n"
-"ausgeliefert werden. Hier einige Beispiele:\n"
-"\n"
-"   video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"   video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * „Init-RamDisk“: Dieser Parameter kann entweder verwendet werden, um beim\n"
-"Betriebssystemstart bereits zusätzliche Kern-Module zur Verfügung zu haben,\n"
-"ohne dass das Start-Gerät zur Verfügung steht oder um ein RamDisk Abbild\n"
-"für den BS-Start in Notfällen zur Verfügung zu haben.\n"
-"\n"
-" * „Größe der Init-RamDisk“: Standardmäßig ist eine RamDisk 4096 Bytes "
-"groß.\n"
-"Sollten Sie eine größere RamDisk benötigen, können Sie das mit diesem\n"
-"Parameter einstellen.\n"
-"\n"
-" * „Schreiben/Lesen“: Normalerweise wird die Verzeichnisbaumwurzel zuerst "
-"im\n"
-"Nur-Lese-Modus eingehängt, um eine Dateisystem Verifikation durchführen zu\n"
-"können, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
-"können Sie hier abstellen.\n"
-"\n"
-" * „NoVideo“: Sollte sich die Apple Grafik-Hardware als extrem "
-"problematisch\n"
-"erweisen, können Sie diesen Parameter verwenden um im sog. „novideo“-Modus,\n"
-"also im FrameBuffer-Modus zu starten.\n"
-"\n"
-" * „Standard“: Wählt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
-"Drücken von [Enter] an der „Yaboot“ Eingabeaufforderung gestartet bekommen.\n"
-"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung drücken, erhalten Sie\n"
-"eine Liste der verfügbaren Alternativen. Der Standardeintrag wird mit einem\n"
-"Stern „*“ markiert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"„Yaboot“ ist ein BS-Starter für NewWorld MacIntosh Rechner. Er kann sowohl\n"
-"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
-"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
-"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
-"können Sie diese hier manuell hinzufügen. Stellen Sie jedoch sicher, die\n"
-"richtigen Parameter zu verwenden.\n"
-"\n"
-"Die Hauptparameter von „Yaboot“ sind:\n"
-"\n"
-" * „Init Nachricht“: Ein Text, der vor der Eingabeaufforderung angezeigt\n"
-"wird.\n"
-"\n"
-" * „Boot Gerät“: Hiermit wird angegeben, wohin die Informationen zum "
-"Starten\n"
-"Ihres GNU/Linux Systems geschrieben werden sollen. Sie sollten in einem\n"
-"früheren Schritt bereits eine Boot-Partition angelegt haben, um diese Daten\n"
-"zu beherbergen.\n"
-"\n"
-" * „Open Firmware Verzögerung“: Im Gegensatz zu „LILO“, stehen mit „Yaboot“\n"
-"zwei Verzögerungen zur Verfügung. Die erste Verzögerung wird in Sekunden\n"
-"angegeben und dient zur Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
-"\n"
-" * „BS-Startverzögerung für den Kern“: Diese Verzögerung entspricht der\n"
-"„LILO“ Start-Verzögerung. Sie haben nach der Auswahl von GNU/Linux diese\n"
-"Verzögerung (in 0,1 Sekunden Schritten) Zeit, bis der Standardkern geladen\n"
-"wird.\n"
-"\n"
-" * „BS-Start von CD erlauben“: Markieren dieses Punkts erlaubt es Ihnen an\n"
-"der ersten Eingabeaufforderung „C“ für den Start von CD zu wählen.\n"
-"\n"
-" * „Open Firmware Start erlauben“: Markieren dieses Punkts erlaubt es Ihnen\n"
-"an der ersten Eingabeaufforderung „N“ für den Open Firmware Start zu\n"
-"wählen.\n"
-"\n"
-" * „Standard BS“: Hiermit stellen Sie ein, welches Betriebssystem nach\n"
-"Ablauf der Open Firmware Verzögerung automatisch gestartet werden soll."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hier bekommen Sie verschiedene Parameter Ihres Systems angezeigt. Je nach\n"
-"vorhandener Hardware sehen Sie hier (oder eben nicht) folgende Einträge:\n"
-"\n"
-" * „Maus“: Kontrollieren Sie die konfigurierte Maus und betätigen Sie, "
-"falls\n"
-"notwendig, die Schaltfläche.\n"
-"\n"
-" * „Tastatur“: Kontrollieren Sie die aktuelle Tastaturvorgabe und wählen "
-"Sie\n"
-"die Schaltfläche, falls Sie die Vorgabe ändern wollen.\n"
-"\n"
-" * „Zeitzone“: „DrakX“ versucht die Zeitzone anhand der gewählten Sprache "
-"zu\n"
-"„erraten“. Es ist jedoch möglich, dass Sie sich nicht in dem Land befinden,\n"
-"das die vorgegebene Sprache erahnen lässt. In diesem Fall sollten Sie die\n"
-"Schaltfläche anwählen, um die Uhr entsprechend Ihrer lokalen Zeitzone zu\n"
-"setzen.\n"
-"\n"
-" * „Drucker“: Durch Anwahl der Schaltfläche „Kein Drucker“ starten Sie den\n"
-"Druckerassistenten.\n"
-"\n"
-" * „Soundkarte“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, "
-"wird\n"
-"sie hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
-"möglich.\n"
-"\n"
-" * „TV-Karte“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird "
-"sie\n"
-"hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
-"möglich.\n"
-"\n"
-" * „ISDN Karte“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde, "
-"wird\n"
-"sie hier angezeigt. Durch Anwahl der Schaltfläche können Sie die Parameter\n"
-"ändern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Wählen Sie die Festplatte, die sie löschen wollen, um Ihre neue Mandrake\n"
-"Linux Distribution darauf zu installieren. Achtung: Alle darauf\n"
-"befindlichen Daten gehen bei diesem Schritt unwiederbringlich verloren!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Wählen Sie „OK“, wenn Sie alle Partitionen (damit auch alle Daten) dieser\n"
-"Festplatte löschen wollen. Achtung: durch Betätigen dieser Schaltfläche\n"
-"werden alle Daten auf der Festplatte unwiederbringlich gelöscht (auch alle\n"
-"evtl. vorhandenen Windows(TM)-Daten)!\n"
-"\n"
-"Wählen Sie „Abbruch“, um die vorhandenen Daten unangetastet zu lassen und\n"
-"die Operation abzubrechen."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ich kann die Kernmodule, die zu diesem Kern passen, nicht finden (Datei %s "
-"fehlt). Das bedeutet normalerweise das Ihre Startdiskette nicht mit dem "
-"Installationsmedium übereinstimmt (Bitte erstellen Sie eine neue "
-"Startdiskette). "
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Sie müssen auch %s formatieren."
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Sie haben die folgenden Server ausgewählt: %s\n"
-"\n"
-"\n"
-"Diese Server werden standardmäßig aktiviert. Sie haben keine bekannten\n"
-"Sicherheitsprobleme, es können jedoch irgendwann welche gefunden werden.\n"
-"In diesem Fall müssen Sie sicherstellen, dass Sie so schnell wie möglich\n"
-" eine Paketaktualisierung vornehmen.\n"
-"\n"
-"\n"
-"Wollen Sie diese Server wirklich installieren?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-"Ich kann kein Broadcast machen,\n"
-"da keine NIS Domäne angegeben wurde"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Legen Sie eine leere, FAT formatierte Diskette in Laufwerk %s ein."
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Diese Diskette ist nich FAT formatiert"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Um diese gespeicherte Paketauswahl zu verwenden, starten Sie die \n"
-"Installation bitte mit: „boot defcfg=floppy“"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fehler beim Lesen der Datei %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Einige Hardware Komponenten Ihres Rechners benötigen „proprietäre“\n"
-"Treiber. Weitere Infos hierzu finden Sie unter: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sie brauchen eine Verzeichnisbaumwurzel.\n"
-"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
-"Wählen Sie „Einhängpunkt“ und setzen Sie ihn auf „/“"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Sie benötigen eine Auslagerungspartition"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sie haben keine Auslagerungspartition\n"
-"\n"
-"Wollen Sie trotzdem fortfahren?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sie müssen eine FAT Partition in „/boot/efi“ eingehängt haben."
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Freien Platz verwenden"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu können."
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Verwende existierende Partition(en)"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Auf der Windows Partition Loopbacks anlegen"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Wählen Sie die Größen"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Größe der Verzeichnisbaumwurzel-Partition in MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Größe der Auslagerungspartition in MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Den freien Platz der Windows Partition verwenden"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Bei welcher Partition wollen Sie die Größe ändern?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Errechne die Grenzen des Windows Dateisystems"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Das Werkzeug zum Verändern der FAT Partitionsgröße kann mit der \n"
-"Partition nicht arbeiten. Folgender Fehler trat auf:\n"
-"%s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
-"Starten Sie bitte erst „defrag“ unter Windows."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WARNUNG!\n"
-"\n"
-"DrakX wird nun die Größe Ihrer Windows Partition verändern.\n"
-"Seien Sie Vorsichtig: Diese Aktion ist gefährlich. Falls Sie es noch\n"
-"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
-"scandisk (sowie möglicherweise defrag) unter Windows auf die Partition \n"
-"anzuwenden. Anschließend können Sie die Installation erneut starten.\n"
-"Sie sollten natürlich generell Sicherheitskopien Ihrer Daten angelegt\n"
-"haben. Falls dies der Fall ist, können Sie mit OK fortfahren."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Wieviel Platz benötigen sie noch für Windows auf"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT Größenanpassung schlug Fehl: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Sie haben keine FAT Partition, deren Größe ich anpassen kann, bzw. die\n"
-"ich als Loopback verwenden kann (möglicherweise haben Sie auch einfach\n"
-"nur nichtmehr genügend freien Speicher)."
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Komplette Platte löschen"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) löschen"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sie haben mehr als eine Festplatte.\n"
-"Auf welche soll GNU/Linux installiert werden?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SÄMTLICHE existierende Partitionen samt der derauf befindlichen Daten \n"
-"auf Laufwerk %s gehen dabei verloren"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Benutzerdefinierte Partitionierung"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Fdisk verwenden"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sie können nun %s partitionieren.\n"
-"Vergessen Sie nicht die Einstellungen mittels ,w` zu speichern, \n"
-"sobald Sie fertig sind."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Sie haben nicht genug freien Platz auf Ihrer Windows Partition."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ich finde nicht genug Platz für die Installation."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Der DrakX Partitionierungsassistent fand folgende Lösung:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Das Partitionieren schlug Fehl: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Netzwerkverbindung herstellen"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Netzwerkverbindung trennen"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Es trat ein Fehler auf. Ich weiß jedoch nicht, wie ich damit sinnvoll \n"
-"umgehen soll. Sie können fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Den Einhängpunkt %s kopieren"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Einige wichtige Pakete wurden nicht richtig installiert. \n"
-"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
-"Testen Sie die CD-ROM auf einem Linux-Rechner mittels „rpm -qpl \n"
-"Mandrake/rpms/*.rpm“\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Willkommen auf %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Kein Disketten-Laufwerk verfügbar"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Beginn von Schritt „%s“\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
-"Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
-"Text-Installation versuchen. Drücken Sie dafür <F1> während dem \n"
-"Installationsstart und geben Sie „text“ an der Eingabeaufforderung \n"
-"ein."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installationsart"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Bitte wählen Sie eine der folgenden Installationsklassen:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Die Gesamtgröße der zu installierenden Pakete beträgt etwa %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Falls Sie weniger als diese Menge installieren wollen, \n"
-"geben Sie (in Prozent) an, wie viele Pakete Sie installieren wollen.\n"
-"\n"
-"Ein geringer Prozentsatz installiert nur die wichtigsten Pakete;\n"
-"100%% installiert alle ausgewählten Pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sie haben nur Platz für %d%% der ausgewählten Pakete. \n"
-"\n"
-"Falls Sie weniger als diese Menge installieren wollen, \n"
-"geben Sie (in Prozent) an, wie viele Pakete Sie installieren wollen.\n"
-"Ein geringer Prozentsatz installiert nur die wichtigsten Pakete;\n"
-"%d%% installiert so viele Pakete wie möglich."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Im nächsten Schritt können Sie genauer auswählen"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prozent der zu installierenden Pakete"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Auswahl der Paketgruppen"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuelle Paketauswahl"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Gesamtgröße: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Ungültiges Paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Name: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Größe: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Wichtigkeit: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Sie können dieses Paket nicht auswählen, da Sie nicht genug Plattenplatz "
-"haben."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Die folgenden Pakete werden installiert werden"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Die folgenden Pakete werden entfernt"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Sie können dieses Paket nicht auswählen/es aus der Auswahl entfernen."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dieses Paket ist existenziell, sie können es nicht deselektieren"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es ist bereits installiert!"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dieses Paket muss aktualisiert werden.\n"
-"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es muss aktualisiert werden!"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Anzeige automatisch markierter Pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Laden von/Speichern auf Diskette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Erneuere Paket Auswahl"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal-Installation"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Zu installierende Pakete auswählen"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installation wird durchgeführt"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Schätzung"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Verbleibende Zeit "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Bitte warten, bereite Installation vor"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d Pakete"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation des Pakets %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akzeptieren"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Zurückweisen"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Bitte wechseln Sie die CD!\n"
-"\n"
-"Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk,\n"
-"dann drücken Sie OK.\n"
-"Falls Sie sie nicht vorliegen haben, drücken Sie Abbruch."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Achtung\n"
-"\n"
-"Bitte lesen Sie die nachfolgenden Ausführungen sorgfältig. Wenn Sie mit\n"
-"irgendeinem Teil nicht einverstanden sind, dürfen Sie nicht den Inhalt\n"
-"der folgenden CDs installieren. Klicken Sie auf „Zurückweisen“, um die\n"
-"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
-"\n"
-"\n"
-"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
-"oder ähnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
-"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
-"Bitte lesen Sie diese Lizenzen sorgfältig und nur wenn Sie mit ihnen\n"
-"einverstanden sind, dürfen Sie die entsprechenden Produkte entsprechend\n"
-"ihrer Lizenz benutzen und weitergeben.\n"
-"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
-"(außer für Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
-"oder Verändern der Komponente.\n"
-"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
-"Lizenz eingeräumten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
-"entsprechende Rechte einräumt, dürfen Sie die Programme nicht auf mehr\n"
-"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
-"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
-"Herausgeber der jeweiligen Komponente.\n"
-"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
-"Dokumentation ist normalerweise verboten.\n"
-"\n"
-"\n"
-"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
-"jeweiligen Autoren und sind durch die Urheberrechtsgesetze für\n"
-"Softwareprodukte geschützt.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Es ist ein Fehler aufgetreten"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Möchten Sie die Installation wirklich beenden?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lizenz"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Bei dieser Ãœbersetzung handelt es sich um eine inoffizielle Ãœbersetzung\n"
-"der Mandrake Linux-Lizenz in die deutsche Sprache. Sie ist keine\n"
-"rechtsverbindliche Darstellung der Lizenzbedingungen der Software in\n"
-"dieser Distribution - nur der ursprüngliche französische Text der\n"
-"Mandrake Linux Lizenz ist rechtsverbindlich. Wir hoffen aber, dass diese\n"
-"Übersetzung den deutschsprechenden Benutzern das Verständnis dieser\n"
-"Lizenz erleichtert.\n"
-"\n"
-"\n"
-"Einführung\n"
-"\n"
-"Das Betriebssystem und die anderen Komponenten, die in Mandrake Linux\n"
-"enthalten sind, werden hier „Software-Produkte“ genannt. Die\n"
-"Software-Produkte umfassen, aber sind nicht beschränkt auf, die\n"
-"Gesamtheit der Programme, Methoden, Regeln, und Dokumentation, welche\n"
-"zum Betriebssystem und den anderen Komponenten der Mandrake Linux\n"
-"Distribution gehören.\n"
-"\n"
-"\n"
-"1. Lizenzabkommen\n"
-"\n"
-"Bitte lesen Sie dieses Dokument sorgfältig. Dieses Dokument ist ein\n"
-"Lizenzabkommen zwischen Ihnen und MandrakeSoft S. A. welches sich auf\n"
-"die Software-Produkte bezieht.\n"
-"Durch Installation, Duplizierung oder Benutzung der Software-Produkte in\n"
-"irgendeiner Art und Weise erklären Sie sich mit den Bedingungen dieser\n"
-"Lizenz einverstanden.\n"
-"Wenn Sie mit irgendeinem Punkt dieser Lizenz nicht einverstanden sind,\n"
-"ist es Ihnen nicht erlaubt, die Software-Produkte zu installieren,\n"
-"duplizieren oder zu benutzen.\n"
-"Mit jedem Versuch, die Software-Produkte in einer Art und Weise zu\n"
-"benutzen, die nicht den Bedingungen dieser Lizenz entspricht, verlieren\n"
-"Sie die Ihnen mit dieser Lizenz eingeräumten Rechte. In diesem Fall\n"
-"haben Sie unverzüglich alle Kopien der Software-Produkte zu vernichten.\n"
-"\n"
-"\n"
-"2. Eingeschränkte Garantie\n"
-"\n"
-"Die Software-Produkte und die beigefügte Dokumentation werden dem\n"
-"Benutzer lediglich zur Verfügung gestellt, es wird keinerlei Garantie\n"
-"gegeben soweit es gesetzlich zulässig ist.\n"
-"MandrakeSoft S. A. haftet unter keinen Umständen, soweit gesetzlich\n"
-"zulässig, für direkte oder indirekte Schäden irgendwelcher Art,\n"
-"(inklusive uneingeschränkt Schäden aufgrund Verlust von\n"
-"Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, Gebühren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund der Benutzung oder\n"
-"der Unmöglichkeit der Benutzung der Software-Produkte entstehen, auch\n"
-"wenn MandrakeSoft S. A. über die Möglichkeit und das Auftreten\n"
-"derartiger Schäden unterrichtet wurde.\n"
-"\n"
-"\n"
-"EINGESCHRÄNKTE VERANTWORTLICHKEIT BEZOGEN AUF DEN BESITZ UND DIE\n"
-"BENUTZUNG VON SOFTWARE, DIE IN EINIGEN LÄNDERN VERBOTEN IST.\n"
-"\n"
-"\n"
-"Soweit gesetzlich zulässig, haften MandrakeSoft S. A. und deren\n"
-"Vertreiber unter keinen Umständen für direkte oder indirekte Schäden\n"
-"irgendwelcher Art, (inklusive uneingeschränkt Schäden aufgrund Verlust\n"
-"von Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, Gebühren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund des Besitzes und\n"
-"der Benutzung von Software-Komponenten oder aufgrund des Ladens von\n"
-"Software-Komponenten von den Internet-Servern von MandrakeSoft S. A.,\n"
-"deren Besitz und Benutzung in einigen Ländern aufgrund lokaler Gesetze\n"
-"nicht gestattet ist, entstehen.\n"
-"Diese Einschränkung der Verantwortlichkeit bezieht sich auch, aber nicht\n"
-"nur, auf die Komponenten für starke Kryptografie enthalten in den\n"
-"Software-Produkten.\n"
-"\n"
-"\n"
-"3. Die GPL und verwandte Lizenzen\n"
-"\n"
-"Die Software-Produkte bestehen aus Komponenten, die von verschiedenen\n"
-"Personen und Einrichtungen erstellt wurden. Die meisten Komponenten\n"
-"unterliegen den Bedingungen der GNU General Public License, im folgenden\n"
-"„GPL“ genannt, oder ähnlichen Lizenzen. Die meisten dieser Lizenzen\n"
-"erlauben es, die Komponenten, die diesen Lizenzen unterliegen, zu\n"
-"benutzen, zu duplizieren, anzupassen, und weiterzugeben. Bitte lesen sie\n"
-"sorgfältig die Bedingungen der Lizenzabkommen von jeder Komponente,\n"
-"bevor Sie sie benutzen. Jegliche Frage zur Lizenz einer Komponente ist an\n"
-"den Autor der Komponente und nicht an MandrakeSoft S. A. zu richten. Die\n"
-"von MandrakeSoft S. A. erstellten Programme unterliegen der GPL.\n"
-"Von MandrakeSoft S. A. geschriebene Dokumentation unterliegt einer\n"
-"spezifischen Lizenz. Bitte lesen Sie die Dokumentation für weitere\n"
-"Details.\n"
-"\n"
-"\n"
-"4. Geistiges Eigentum\n"
-"\n"
-"Alle Rechte an den Komponenten der Software-Produkte liegen bei den\n"
-"entsprechenden Autoren und sind durch die Urheberrechtsgesetze für\n"
-"Softwareprodukte geschützt.\n"
-"MandrakeSoft S. A. behält sich das Recht vor, die Software-Produkte zu\n"
-"modifizieren und anzupassen.\n"
-"„Mandrake“, „Mandrake Linux“ und entsprechende Logos sind eingetragene\n"
-"Warenzeichen der MandrakeSoft S. A..\n"
-"\n"
-"\n"
-"5. Gesetzliche Bestimmungen\n"
-"\n"
-"Wenn irgendein Teil dieses Lizenzabkommens durch einen Gerichtsentscheid\n"
-"für ungültig, illegal oder inakzeptabel erklärt wird, wird dieser Teil\n"
-"aus dem Abkommen ausgeschlossen. Sie bleiben weiterhin an die anderen,\n"
-"anwendbaren Teile gebunden.\n"
-"Die Bedingungen dieses Lizenzabkommens unterliegen den Gesetzen von\n"
-"Frankreich. Alle Unstimmigkeiten bezüglich der Bedingungen dieser Lizenz\n"
-"werden vorzugsweise außergerichtlich beigelegt. Letztes Mittel ist das\n"
-"zuständige Gericht in Paris, Frankreich.\n"
-"Zu jeglicher Frage zu diesem Dokument kontaktieren Sie bitte\n"
-"MandrakeSoft S. A..\n"
-"Introduction\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"Hier die französche Version:\n"
-"\n"
-"Le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-après dénommés ensemble les \n"
-"« Logiciels ». Les Logiciels comprennent notamment, mais de façon non \n"
-"limitative, l'ensemble des programmes, procédés, règles et documentations \n"
-"relatifs au système d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le présent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"manière que ce soit indique que vous reconnaissez avoir préalablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du présent contrat de licence. En cas de désaccord avec le présent "
-"document \n"
-"vous n'êtes pas autorisé à installer, reproduire et utiliser de quelque \n"
-"manière que ce soit ce produit.\n"
-"Le contrat de licence sera résilié automatiquement et sans préavis dans le \n"
-"cas où vous ne vous conformeriez pas aux dispositions du présent document. \n"
-"En cas de résiliation vous devrez immédiatement détruire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'état \n"
-"et sans aucune garantie. MandrakeSoft S.A. décline toute responsabilité \n"
-"découlant d'un dommage direct, spécial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de façon non limitative, tout dommage entraîné par les pertes de \n"
-"bénéfices, interruptions d'activité, pertes d'informations commerciales ou \n"
-"autres pertes pécuniaires, ainsi que des éventuelles condamnations et \n"
-"indemnités devant être versées par suite d'une décision de justice, et ce \n"
-"même si MandrakeSoft S.A. a été informée de la survenue ou de \n"
-"l'éventualité de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT A LA DETENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIBES DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront être \n"
-"tenus responsable à raison d'un préjudice spécial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de façon non \n"
-"limitative les pertes de bénéfices, interruptions d'activité, pertes \n"
-"d'informations commerciales ou autres pertes pécuniaires, ainsi que \n"
-"des éventuelles condamnations et indemnités devant être versées par suite \n"
-"d'une décision de justice) qui ferait suite à l'utilisation, la détention \n"
-"ou au simple téléchargement depuis l'un des sites de téléchargement de \n"
-"Mandrake Linux de logiciels prohibés par la législation à laquelle vous \n"
-"êtes soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constitués de modules logiciels créés par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribués sous \n"
-"les termes de la GNU General Public Licence (ci-après dénommée « GPL ») ou \n"
-"d'autres licences similaires. La plupart de ces licences vous permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"régissent. Veuillez lire et agréer les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence de chaque Logiciel est à soumettre à l'auteur (ou \n"
-"ses représentants) du Logiciel et non à MandrakeSoft. \n"
-"Les programmes conçus par MandrakeSoft sont régis par la licence GPL. \n"
-"La documentation rédigée par MandrakeSoft fait l'objet d'une licence \n"
-"spécifique. Veuillez vous référez à la documentation pour obtenir plus \n"
-"de précisions.\n"
-"\n"
-"\n"
-"4. Propriété intellectuelle\n"
-"\n"
-"Tous les droits, titres et intérêts des différents Logiciels sont la \n"
-"propriété exclusive de leurs auteurs respectifs et sont protégés au titre \n"
-"des droits de propriété intellectuelle et autres lois régissant le droit \n"
-"des Logiciels. Les marques « Mandrake » et « Mandrake Linux » ainsi que "
-"les \n"
-"logotypes associés sont déposés par MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Dispositions diverses\n"
-"\n"
-"Si une disposition de ce contrat de licence devait être déclarée nulle, \n"
-"illégale ou inapplicable par un tribunal compétent, cette disposition sera \n"
-"exclue du présent contrat. Vous continuerez à être liés aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis à la Loi française. Toute contestation relative aux présentes \n"
-"sera réglée préalablement par voie amiable. A défaut d'accord avec \n"
-"MandrakeSoft S.A., les tribunaux compétents de Paris seront saisis du \n"
-"litige. Pour toute question relative au présent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hier die Liste aller Tastaturen"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Welche Installationsart wollen Sie durchführen?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installation/Aktualisierung"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Empfehlenswert"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experte"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aktualisierung"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Nur Pakete aktualisieren"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Maus Port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihre Maus hängt."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Tastenemulation"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulation der 2. Taste"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulation der 3. Taste"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA Karten konfigurieren ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE konfigurieren"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Keine Partition verfügbar"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Durchsuchen der Partitionen, um die Einhängpunkte zu finden."
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Wählen Sie die Einhängpunkte"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Vermutlich ist Ihre Partitionstabelle fehlerhaft, ich habe Probleme,\n"
-"sie zu lesen :-(  (Folgender Fehler trat auf: „%s“).\n"
-"Ich kann fortfahren, indem ich die fehlerhaften Partitionen lösche \n"
-"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ können \n"
-"Sie mir jedoch auch verbieten, die Partitionstabelle zu verändern.\n"
-"\n"
-"Sind Sie einverstanden, dass ich die problematischen Partitionen lösche?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ist nicht in der Lage, Ihre Partitionstabelle korrekt zu \n"
-"interpretieren. Sie können fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Sie haben keinen Platz für die 1 MB große Start-Partition vorgesehen! Die "
-"Installation wird fortgesetzt, Sie müssen jedoch eine Start-Partition mit "
-"DiskDrake erstellen."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Es wurde keine Verzeichnisbaumwurzel gefunden, die aktualisiert werden kann."
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Welche Partition ist Ihre Verzeichnisbaumwurzel?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, um die Änderungen \n"
-"der Partitionstabelle wirksam werden zu lassen."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Zu formatierende Partitionen auswählen"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Soll ich nach defekten Blöcken suchen?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partitionen formatieren"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Erzeugen und formatieren der Datei %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Der Swap-Bereich ist zu klein, um die Installation zu ermöglichen! \n"
-"Bitte vergrößern Sie den Bereich."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Suche nach vorhandenen Paketen"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Finden der zu aktualisierenden Pakete"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Es steht auf Ihrem System nicht genügend Speicherplatz für die \n"
-"Installation bzw. Aktualisierung zur Verfügung (%d > %d)."
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Komplett (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimal (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Empfohlen (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Bitte wählen Sie, ob die Paketauswahl von Diskette geladen \n"
-"oder darauf gespeichert werden soll. Es handelt sich um das \n"
-"selbe Format, wie die unter „auto_install“ erzeugten Disketten."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Von Diskette laden"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Laden von Diskette ..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Auswahl der Pakete"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr ""
-"Legen Sie eine Diskette ein, auf der Ihre Paketauswahl gespeichert ist."
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Auf Diskette speichern"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Gewünschte Größe übersteigt den verfügbaren Platz"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Installationsklasse"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Sie haben keine Paketgruppe ausgewählt\n"
-"Bitte wählen Sie die minimale Installation, die Sie wünschen."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Mit X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Mit minimaler Dokumentation (Empfohlen)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Extrem minimale Installation (ohne „urpmi“)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Falls Sie alle aufgeführten CDs haben, wählen Sie „OK“, \n"
-"falls Sie keine der aufgeführten CDs haben, wählen Sie „Abbruch“,\n"
-"falls nur einige der aufgeführten CDs fehlen, entfernen Sie die \n"
-"entsprechende Markierung und wählen Sie dann „OK“."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM „%s“"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Installation vorbereiten"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installiere Paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Einstellungen für nach der Installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Bitte legen Sie die Startdiskette in Laufwerk %s ein."
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-"Bitte legen Sie die Diskette der zu aktualisiernden Module in Laufwerk %s "
-"ein."
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sie haben nun die Möglichkeit Software mit starker Verschlüsselung aus dem \n"
-"Internet zu laden.\n"
-"\n"
-"WARNUNG:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall MandrakeSoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"Bitte wenden Sie sich für alle weiteren Fragen bzgl. dieser Übereinkunft "
-"an: \n"
-"MandrakeSoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sie haben nun die Möglichkeit Pakete zu installieren, die nach Erscheinen\n"
-"der Distribution aktualisiert wurden. Es handelt sich um \n"
-"Sicherheitsaktualisierungen und Fehlerkorrekturen.\n"
-"\n"
-"Allerdings benötigen Sie dafür eine funktionierende Internertverbindung.\n"
-"\n"
-"Möchten Sie die Aktualisierungen vornehmen?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Verbindung mit dem Mandrake Linux Web-Server aufbauen, um eine Liste\n"
-"verfügbarer Pakete zu erhalten."
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Bitte wählen Sie einen Mirror, von dem Sie die Pakete holen wollen."
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Verbindung mit dem Mirror aufbauen, um eine Liste verfügbarer Pakete zu "
-"erhalten."
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wählen Sie Ihre Zeitzone"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardware Uhr liefert GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische Zeit-Synchronisation (durch NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "CUPS-Server auf der Gegenseite"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Kein Drucker"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Verfügen Sie über eine ISA soundkarte?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Starten Sie „sndconfig“ nach der Installation, um Ihre Soundkarte "
-"einzurichten."
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Es wurde keine Soundkarte gefunden. Versuchen Sie „harddrake“nach der "
-"Installation."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Zusammenfassung"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Maus"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zeitzone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Drucker"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN Karte"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Soundkarte"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-Karte"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokale Dateien"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root-Passwort setzen"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Kein Passwort"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
-"ohne auf einen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nützlich, \n"
-"wenn Sie SILO nicht auf Ihrem System installieren möchten, wenn ein \n"
-"anderes Betriebssystem SILO entfernt hat oder Ihre Hardware-Konfiguration \n"
-"die Verwendung eines BS-Starters nicht korrekt verarbeitet. \n"
-"Eine individuelle Startdiskette kann auch in Verbindung mit der \n"
-"Mandrake Linux Rettungsdiskette verwendet werden, wodurch das System \n"
-"nach schwerwiegenden Fehlern viel einfacher wiederhergestellt werden \n"
-"kann.\n"
-"\n"
-"Falls Sie eine Startdiskette erstellen wollen, legen Sie eine Diskette \n"
-"ohne relevante Daten in ihr erstes Laufwerk und drücken Sie „OK“."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "erste Disketten-Laufwerk"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "zweite Disketten-Laufwerk"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ãœberspringen"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mit einer individuellen Startdiskette können Sie Ihr LINUX-System starten, \n"
-"ohne auf den normalen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nützlich, wenn \n"
-"Sie weder LILO noch Grub auf Ihrem System installieren möchten, wenn ein \n"
-"anderes Betriebssystem Ihren Betriebssystemstarter entfernt hat oder Ihre "
-"Hardware-Konfiguration die Verwendung eines Betriebssystemstarters nicht "
-"korrekt \n"
-"verarbeitet. Eine individuelle Startdiskette kann auch mit der Linux \n"
-"Mandrake Rettungsdiskette verwendet werden, wodurch das System nach \n"
-"schwerwiegenden Fehlern viel einfacher wiederhergestellt werden kann.\n"
-"\n"
-"Möchten Sie jetzt eine Startdiskette für Ihr System erstellen?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(WARNUNG! Sie verwenden XFS für Ihre Verzeichnisbaumwurzel.\n"
-"Das Erstellen einer Startdiskette auf einem 1,44 MB Medium \n"
-"schlä sicher fehl, da XFS einen sehr großen Treiber benötigt)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ich kann kein Laufwerk finden"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Wählen Sie das Laufwerk, in dem Sie die Start-Diskette erstellen wollen"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-"Legen Sie eine Diskette, die keine relevanten Daten mehr enthällt in das %s "
-"ein."
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Startdiskette wird erstellt..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Betriebssystemstarter vorbereiten"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Sie scheinen einen „OldWorld“ oder unbekannten\n"
-"Rechner zu verwenden. Der Betriebssystemstarter\n"
-"„yaboot“ wird daher leider nicht funktionieren.\n"
-"Die Installation wird fortgesetzt, sie werden jedoch \n"
-"„BootX“ verwenden müssen um LINUX auf Ihrem Rechner\n"
-"zu starten."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Möchten Sie „aboot“ verwenden?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fehler bei der Installation von aboot. Soll ich die Installation \n"
-"mit Gewalt versuchen, auch wenn dies die Zerstörung der ersten \n"
-"Partition verursachen kann?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "BS-Starter installieren"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Die Installation des BS-Starters schlug Fehl. Folgender Fehler trat auf:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sie müssen Ihr Open Firmware Startgerät anpassen, dass es den \n"
-"BS-Starter erkennt. Falls Sie beim Neustart nicht die \n"
-"Eingabeaufforderung des BS-Starters sehen, drücken Sie \n"
-"Strg-Option-O-F und geben Sie folgendes ein:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-"Tippen Sie dann: shut-down\n"
-"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Legen Sie eine leere Diskette in das %s ein."
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Einige Schritte sind noch nicht komplett.\n"
-"\n"
-"Wollen Sie DrakX wirklich beenden?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Herzlichen Glückwunsch, die Installation ist abgeschlossen.\n"
-"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und drücken Sie die "
-"Eingabetaste zum Neustart Ihres Rechners.\n"
-"\n"
-"Für Informationen zu Sicherheitsaktualisierungen dieser Version von Mandrake "
-"Linux informieren Sie sich bitte unter \n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"Wie Sie Ihr System warten können, erfahren Sie im Kapitel „Nach der "
-"Installation“ im offiziellen Benutzerhandbuch von Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Die automatische Installation kann, falls Sie wollen,\n"
-"vollautomatisch erfolgen. In diesem Fall wird die\n"
-"Festplatte vollständig durch DrakX rekonfiguriert\n"
-"(diese Möglichkeit ist für die Replikation auf anderen\n"
-"Rechnern gedacht).\n"
-"\n"
-"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
-"Installation durchzuführen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatisiert"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Erneut abspielen"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Paketauswahl speichern"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"   <Tab>/<Alt-Tab> nächstes Element | <Leertaste> auswählen | <F12> weiter "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "Ich kann „kdesu“ nicht finden!"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "Das Programm „consolehelper“ wurde nicht gefunden."
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Wählen Sie eine Datei"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Fortgeschritten"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Einfach"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Bitte warten"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Baum erweitern"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Baum verkleinern"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Umschalten zwischen unsortiert und gruppiert"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ihre Wahl? (Standard ‚%s‘) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Angaben, die Sie machen müssen:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ihre Wahl? (0/1, Standard ‚%s‘) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Schaltfläche „%s“: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Möchten Sie diese Schaltfläche betätigen?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ihre Wahl? (Standard „%s“ %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Es gibt zahlreiche Auswahlmöglichkeiten (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Bitte wählen Sie die Nummer aus dem Bereich, die Sie bearbeiten wollen,\n"
-"oder betägen Sie die Eingabetaste um fort zu fahren.Ihre Wahl? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Anmerkung: Ein Eintrag wurde geändert:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Erneut verschicken"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tschechien (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Deutschland"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spanien"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finnland"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Frankreich"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norwegen"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polen"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russland"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Schweden"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Grßbritannien"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanien"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenien (alt)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenien (Schreibmaschine)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenien (Phonetisch)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbeidschan (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgien"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarien (Phonetisch)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarien (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilien (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Weißrussland"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Schweiz (deutsches Layout)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Schweiz (französisches Layout)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tschechien (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Deutschland (ohne Tod-Tasten)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dänemark"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegen)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Schweden)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estland"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgien (Kyrillisches Layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgien (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Griechenland"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungarn"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatien"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israel"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israel (Phonetisch)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Island"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italien"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japan (106 Tasten)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lateinamerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauen (AZERTY - alt)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauen (AZERTY - neu)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauen (QWERTY - „number row“)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauen (QWERTY - Phonetisch)"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettland"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Mazedonien"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Niederlande"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polen (QWERTY Layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polen (QWERTZ Layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugal"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumänien (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumänien (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russland (YaWERTY)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slowenien"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slowakei (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slowakei (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbien (Kyrillisches Layout)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Indien (Tamilisches Layout)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailändische Tastatur"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadschikistan"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkei (traditionelles „F“ Modell)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkei (modernes „Q“ Modell)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraine"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Vereinigte Staaten von Amerika (international)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam QWERTY („number row“)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslawien (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "AltGr-Taste"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Umschalttasten gleichzeitig"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Strg und Umschalttaste gleichzeititg"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock Taste"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Strg und Alt gleichzeitig"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt und Umschalttaste gleichzeitig"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Menütaste"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Linke „Windows“-Taste"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Rechte „Windows“-Taste"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Schleife bei den Einhängpunkten %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Entfernen Sie erst die Logischen Medien\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Die PCMCIA-Unterstützung für 2.2er Kerne wurde eingestellt. Verwenden Sie "
-"bitte einen 2.4er Kern."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Maus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MausMan/FirstMaus (Seriell)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generische PS2 Rad-Maus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Maus"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMaus"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 Taste"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generische 2 Tasten Maus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generisch"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rad"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "Seriell"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generische 3 Tasten Maus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMaus"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MausMan/FirstMaus"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serie"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MausMan+/FirstMaus+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serie"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Maus (Seriell, alter C7 Typ)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Bus-Maus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 Tasten"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 Tasten"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "keine"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Keine Maus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Bitte testen Sie Ihre Maus"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Um Ihre Maus zu aktivieren:"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEGEN SIE IHR MAUS-RAD!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Beenden"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Weiter ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Zurück"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ist dies richtig?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Internetverbindung"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Der gebräuchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
-"Einige Verbindungen benutzen jedoch pptp, andere dhcp.\n"
-"Wenn Sie nicht wissen was Sie brauchen, wählen Sie „pppoe verwenden“"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP verwenden"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE verwenden"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP verwenden"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Welchen DHCP Klienten wollen Sie verwenden?\n"
-"Voreingestellt ist „dhcpcd“"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ich habe keine Ethernet-Netzwerkkarte finden können, daher kanndieser "
-"Verbindungstyp nicht konfiguriert werden."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Wählen Sie die Netzwerkkarte"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Bitte wählen Sie, über welches Netzwerkgerät Sie die \n"
-"Internetverbindung herstellen wollen."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Keine Netzwerkkarte gefunden"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Einige DHCP-Server benötigen ihn, um korrekt zu arbeiten.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Rechnername"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Netzwerk Konfigurationsassistent"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externes ISDN Modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN Karte"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Um welchen Typ ISDN-Verbindung handelt es sich?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Welche ISDN Konfiguration wollen Sie durchführen?\n"
-"\n"
-"* Die alte Konfiguration verwendet „isdn4net“. Sie \n"
-"  enthällt mächtigere Werkzeuge, ist jedoch komplizierter \n"
-"  einzurichten und nicht voll standardkonform.\n"
-"\n"
-"* Die neue Konfiguration mit „isdn-light“ ist \n"
-"  verständlicher und standardkonformer, sie enthällt \n"
-"  jedoch weniger Werkzeuge.\n"
-"\n"
-"Wir empfehlen die „isdn-light“ Variante.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Neue Konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Alte Konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguration"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Wählen Sie Ihren Netzanbieter.\n"
-"Sollte er nicht aufgeführt sein, wählen Sie „Nicht aufgeführt“"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europäisches Protokoll"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europäisches Protokoll (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll für den Rest der Welt"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll für den Rest der Welt \n"
-"ohne D-Kanal (Leased Lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Welches Protokoll wollen Sie verwenden?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Welchen Kartentyp verwenden Sie?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Keine Ahnung"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA/PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
-"nächsten Schirm korrekt sein.\n"
-"\n"
-"Falls Sie eine PCMCIA-Karte besitzen, müssen Sie IRQ und E/A-Bereich Ihrer "
-"Karte kennen.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abbruch"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortfahren"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Bitte wählen Sie Ihre ISDN Karte"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ich habe eine PCI ISDN-Karte gefunden, \n"
-"kenne sie jedoch nicht. Bitte helfen Sie mir,\n"
-"indem Sie im nächsten Menü eine auswählen."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Ich konnte keine PCI ISDN-Karte finden.\n"
-"Bitte wählen Sie im nächsten Menü eine aus."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihr Modem hängt."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Einwahl Parameter"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Name der Verbindung"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript-basiert"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-basiert"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Name der Domäne"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Erster DNS Server (optional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Zweiter DNS Server (optional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können die Verbindung trennen oder sie neu konfigurieren."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können Ihre Internetverbindung neu konfigurieren"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Sie sind momentan mit dem Internet verbunden."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie können eine Internetverbindung aufbauen oder die Verbindung neu "
-"konfigurieren"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Sie sind momentan nicht mit dem Internet verbunden."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Verbinden"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Verbindung trennen"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Die Verbindung konfigurieren"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetverbindung und -einrichtung"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Wir werden nun die Verbindung „%s“ konfigurieren."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Wir werden nun die Verbindung „%s“ konfigurieren.\n"
-"\n"
-"\n"
-"Wählen Sie „OK“, um fortzufahren."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da Sie eine Netzwerkinstallation durchführen, ist Ihr Netzwerk bereits\n"
-"konfiguriert. Wählen Sie „OK“, um diese Einstellung beizubehalten oder\n"
-"„Abbruch“, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
-"konfigurieren.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Willkommen zum Netzwerk Konfigurationsassistent.\n"
-"\n"
-"Ich versuche nun Ihre Internet-/Netzwerk-Verbindung zu konfigurieren.\n"
-"Falls Sie keine Autodetektion wünschen, entfernen Sie bitte die Markierung.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Wählen Sie das Profil, dass eingestellt werden soll"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Autoerkennung benutzen"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Geräteerkennung..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normale Modem Verbindung"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "an Prot %s gefunden"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN Verbindung"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s gefunden"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL Verbindung"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "an Schnittstelle %s gefunden"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabel Verbindung"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabel Verbindung gefunden"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN Verbindung"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "Netzwerkkarte(n) gefunden"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Wählen Sie die Verbindung, die Sie konfigurieren wollen"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
-"Internet zu verbinden. Bitte wählen Sie, welche Verbindungsart\n"
-"ich versuchen soll.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet-Verbindung"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Möchten Sie die Verbindung bei Betriebssystemstart herstellen?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netzwerk Konfiguration"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Das Netzwerk muss neu gestartet werden"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Herzlichen Glückwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
-"\n"
-"Die Konfiguration wird nun in Ihr System integriert.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Es ist sehr empfehlenswert, im Anschluss Ihre X-Oberfläche\n"
-"neu zu starten, um Probleme, die durch die Änderung des\n"
-"Rechnernamens hervorgerufen werden, zu vermeiden."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Während der Konfiguration traten Fehler auf.\n"
-"Kontrollieren Sie Ihre Verbindung mit „net_monitor“ oder dem Mandrake "
-"Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
-"die Konfguration starten."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WARNUNG: Dieses Gerät wurde bereits zum Herstellen einer Internetverbindung "
-"konfiguriert.\n"
-"Drücken Sie einfach „OK“, um die Einstellungen zu behalten.\n"
-"Fall Sie Felder verändern, wird die Konfiguration überschrieben."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bitte geben Sie die IP Parameter dieser Maschine ein.\n"
-"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
-"angegeben werden (etwa  „192.168.1.42“)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurieren der Netzwerkkarte %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (Treiber %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP Adresse"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netzmaske"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatische IP-Adressen Zuweisung"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“.\n"
-"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-Server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (etwa %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway Gerät"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxies einstellen"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP Proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP Proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Netzwerkkarten-ID überwachen (sinnvoll für Laptops)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy muss „http://...“ sein"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy muss „ftp://...“ sein"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet Konfiguration"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Möchten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Ich teste gerade Ihre Verbindung..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sie sind jetzt mit dem Internet verbunden."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Aus Sicherheitsgründen wird die Verbindung nun unterbrochen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sie sind momentan nicht mit dem Internet verbunden.\n"
-"Versuchen Sie Ihre Internetverbindung wieder zu konfigurieren."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Verbindungskonfiguration"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-"Bitte füllen Sie die folgen Felder aus \n"
-"bzw. makieren Sie die korrekten Angaben"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Karten IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Karten Mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Karten E/A"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Karten IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Karten IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ihre eigene Telefonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Name des Providers (z.B. provider.net) "
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonnummer des Providers"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Erster DNS des Providers (optional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Zweiter DNS des Providers (optional)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Land auswählen"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Wahlmodus"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Verbindungsgeschwindigkeit"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "VerbindungsTimeout (in Sec)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kennzeichen (Login)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Passwort"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "Fehler beim Einhängen: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
-"den ich nicht ansprechen kann. Die einzige Lösung ist, dass Sie \n"
-"Ihre primären Partitionen so verschieben, dass der Bereich direkt \n"
-"neben der erweiterten Partition zu liegen kommt."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurieren aus der Datei %s schlug Fehl: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fehlerhafte Backup-Datei"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fehler beim Schreiben in Datei %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Mit Ihrer Platte stimmt etwas nicht!\n"
-"Der vorgenommene Integritätstest schlug Fehl.\n"
-"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu einem \n"
-"unvorhersagbaren Ergebnis führen wird."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "unbedingt notwendig"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "wichtig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "sehr angenehm"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "angenehm"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "eventuell"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokaler Drucker"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Entfernter Drucker"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Drucker an lpd-Server auf der Gegenseite"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Netzwerkdrucker (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Drucker an SMB/Windows 9x/ME/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Drucker an NetWare Server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Druckeranschluss URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Den Auftrag an ein Kommando weiterleiten"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Unbekanntes Modell"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale Drucker"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Entfernte Drucker"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " an Parallelport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB-Drucker \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", Multifunktionsgerät am Parallelport \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", USB Multifunktionsgerät"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", Multifunktionsgerät am HP JedDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", Multifunktionsgerät"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", drucken auf %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "auf LDP-Server „%s“, Drucker „%s“"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP Drucker „%s“, Port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "auf Windows-Server „%s“, Freigabe „%s“"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "auf dem Novell-Server „%s“, Drucker „%s“"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", mittels Kommando „%s“"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Rohdaten-Drucker (kein Treiber)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(an %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(an diesem Rechner)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Auf CUPS-Server „%s“"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Wählen Sie die Drucker-Anbindung"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Wie ist der Drucker mit Ihrem Rechner verbunden?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Falls auf der Gegenseite ein CUPS-Server läuft, müssen Sie\n"
-"hier keine Einstellungen vornehmen, die Drucker werden \n"
-"automatisch erkannt und übernommen."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS Konfiguration"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "CUPS-Server angeben"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Falls auf der Gegenseite ein CUPS-Server läuft, müssen Sie\n"
-"hier keine Einstellungen vornehmen; CUPS Server informieren Ihren\n"
-"Rechner über die von ihnen verwalteten Drucker. Alle Drucker,\n"
-"die Ihr Rechner momentan kennt sind unter „Entfernte Drucker“ aufgeführt.\n"
-"Sollte der entfernte CUPS Server jedoch in einem anderen Subnetz\n"
-"beheimatet sein, müssen Sie mindestens seine IP-Adresse, evtl. auch\n"
-"die Port Nummer angeben. Im lokalen Subnetz können Sie die Felder\n"
-"frei lassen."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalerweise wird CUPS automatisch entsprechend Ihres Netzwerks\n"
-"eingerichtet, damit Sie alle Drucker im lokalen Netzwerk verwenden\n"
-"können. Falls das nicht funktioniert, schalten Sie „Automatische\n"
-"CUPS Konfiguration“ aus und editieren Sie die Datei\n"
-"„/etc/cups/cupsd.conf“ selbst. Vergessen Sie nicht, CUPS anschließend\n"
-"neu zu starten (Befehl: „service cups restart“)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Die Prot Nummer muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-Server-IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatische CUPS Konfiguration"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Geräteerkennung..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test der Anschlüsse"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Drucker hinzufügen"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
-"\n"
-"Dieser Assistent hilft Ihnen lokale oder entfernte Drucker so einzurichten, "
-"dass dieser Rechner bzw. andere in Ihrem Netzwerk darauf drucken können.\n"
-"\n"
-"Sie werden nur nach den nötigen Informationen über den Drucker gefragt, um "
-"Ihnen dann Zugriff auf Treiber,  Druckoptionen und Anschlussart zu erhalten."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokaler Drucker"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
-"\n"
-"Dieser Assistent hilft Ihnen lokale Drucker einzurichten, dass dieser "
-"Rechner bzw. andere in Ihrem Netzwerk darauf drucken können.\n"
-"\n"
-"Bitte schließen sie Ihre(n) Drucker an, und stellen Sie sicher dass das "
-"Gerät/die Geräte eingeschaltet ist/sind. Betätigen sie die Schaltfläche "
-"„Weiter“, wenn Sie fortfahren möchten bzw. „Abbruch“, wenn Sie jetzt keinen "
-"Drucker einrichten möchten.\n"
-"\n"
-"In seltenen Fällen kann es zum totalen stenenbleien des Rechners führen, "
-"wenn Sie eine Drucker-Selbsterkennung durchführen. Schalten Sie diese "
-"einfach aus, wenn Sie einen Drucker ohne Selbsterkennung durchführen wollen. "
-"Verwenden Sie den  „Expertenmodus“ von PrinterDrake, um einen entfernten "
-"Drucker einzurichten, falls er nicht automatisch aufgeführt wird."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Drucker-Selbsterkennung"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Herzlichen Glückwunsch, Ihr Drucker ist nun installiert und eingerichtet!\n"
-"\n"
-"Sie können nun mit dem „Drucken“ Befehl Ihrer Anwendungen (meistens im "
-"„Datei“-Menü zu finden) drucken.\n"
-"\n"
-"Falls Sie einen Drucker hinzufügen, entfernen oder umbenennen wollen,\n"
-"oder wenn Sie die Standardeinstellungen wie Papierschacht oder \n"
-"Druckqualität) anpassen wollen, wählen Sie „Drucker“ im „Hardware“\n"
-"Bereich des Mandrake Kontrollzentrums."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Selbsterkennung von Druckern"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"PrinterDrake ist in der Lage Ihre Parallelport- und USB-Drucker selbst\n"
-"zu erkennen und einzurichten. In einigen seltenen Fällen KANN ES JEDOCH\n"
-"ZUM TOTALEN STEHENBLEIBEN DES BETRIEBSSYSTEMS FÃœHREN! Verwenden Sie \n"
-"diese Variante also AUF IHR RISIKO!\n"
-"\n"
-"Wollen Sie wirklich, dass PrinterDrake eine Selbsterkennung versucht?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Autoerkennung durchführen"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Drucker selbst einrichten"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s gefunden"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Drucker an Parallelport \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-Drucker \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Es wurde kein lokaler Drucker erkannt! Um ihn manuell hinzuzufügen geben Sie "
-"einfach einen Geräte- oder Dateinamen in der Eingabezeile an (Parallele "
-"Anschlüsse: /dev/lp0, /dev/lp1, ..., äquivalent zu LPT1:, LPT2:, ...; Erster "
-"USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Sie müssen einen Geräte- oder Dateinamen eingeben!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Kein Lokaler Drucker erkannt!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Netzwerkdrucker können erst nach der Installation eingerichtet werden. "
-"Wählen Sie „Einstellungen/Hardware/Drucker“ im Mandrake Kontrollzentrum."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Um Netzwerkdrucker zu installieren wäen Sie bitte „Abbruch“, wechseln in den "
-"„Expertenmoduns“ und wählen erneut „Drucker hinzufügen“."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Der folgende Drucker wurde automatisch erkannt, falls es sich nicht um den "
-"Drucker handelt, den Sie einrichten wollen, geben Sie einen Geräte- oder "
-"Dateinamen in der Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Hier eine Liste aller automatisch erkannten Drucker. Bitte wählen Sie den "
-"gewünschten Drucker oder geben Sie einen Geräte- oder Dateinamen in der "
-"Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Der folgende Drucker wurde automatisch erkannt. Die Einrichtung wird voll "
-"automatisch erfolgen. Sollte Ihr Drucker nicht richtig erkannt worden sein, "
-"oder wollen Sie die Einrichtung selbst vornehmen, wählen Sie „Manuelle "
-"Konfiguration“."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Hier eine Liste aller automatisch erkannten Drucker. Bitte wählen Sie den "
-"gewünschten Drucker. Die Einrichtung wird voll automatisch erfolgen. Sollte "
-"Ihr Drucker nicht richtig erkannt worden sein, oder wollen Sie die "
-"Einrichtung selbst vornehmen, wählen Sie „Manuelle Konfiguration“."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Bitte wählen Sie den Anschluss, an dem der Drucker hängt oder geben Sie "
-"einen Geräte- oder Dateinamen in der Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Bitte wählen Sie den Anschluss, an dem Ihr Drucker hängt."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallele Anschlüsse: /dev/lp0, /dev/lp1, ..., äquivalent zu LPT1:, "
-"LPT2:, ..., Erster USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Sie müssen einen Drucker wählen/ein Gerät eingeben!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuelle Konfiguration"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Ist Ihr Drucker ein Multifunktionsgerät von HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 mit Scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installiere das „HPOJ“-Paket ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Geräte untersuchen und HPOJ einrichten ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installiere das „SANE“-Paket ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Scannen mit Ihrem HP-Multifunktionsgerät"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "CUPS den Drucker-Port zugänglich machen ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Lesen der Drucker-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Optionen für Netzwerk-Druckerspooler"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Um eine entfernte lpd Warteschlange zu verwenden, müssen Sie den "
-"Rechnernamen des Drucker-Servers sowie den Druckernamen auf diesem Server "
-"angeben, an den die Aufträge übertragen werden sollen."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Name des entfernten Rechners"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Name des entfernten Druckers"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Der Name des entfernten Rechners fehlt!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Der Name des entfernten Druckers fehlt!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Um auf einem SMB-Drucker zu drucken sind folgende Angaben erforderlich: Der "
-"SMB-Rechnername des Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers) und möglicherweise die IP-Adresse, Freigabename "
-"für den Drucker, auf den Sie zugreifen möchten, sowie entsprechender "
-"Benutzername, Passwort und Arbeitsgruppe."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-Server"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-Server-IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Freigabename"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Arbeitsgruppe"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Sie müssen entweder Den Servernamen oder seine IP-Adresse angeben!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Der Name der Samba-Freigabe fehlt!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Optionen für NetWare-Drucker"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
-"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie falls "
-"notwendig, den entsprechenden Benutzernamen samt Passwort."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Drucker-Server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Name der Druckerwarteschlange"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Der NCP Servername fehlt!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Der NCP Warteschlangen-Name fehlt!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Optionen für TCP/Socket-Drucker"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Um einen TCP- oder Socket-Drucker verwenden zu können, müssen Sie auf alle "
-"Fälle dessen Rechnernamen, möglicherweise auch den Port, angeben. Bei HP "
-"JetDirect Servern ist dies normalerweise die Port-Adresse 9100, bei anderen "
-"Servern kann es eine andere sein. Schauen Sie im Zweifelsfall in die "
-"Unterlagen Ihrer Hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Rechnername des Druckers"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Der Rechnername des Druckers fehlt!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Druckeranschluss URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Sie können hier direkt die URI eines Druckers angeben. Die URI muss den CUPS "
-"bzw. den Foomatic Spezifikationen genügen. Es sei hier noch angemerkt, dass "
-"nicht alle URI-Typen von allen Drucksystemem unterstützt werden."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Sie müssen eine gültige URI eingeben!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Jeder Drucker benötigt einen Namen (etwa „Drucker“).\n"
-"Beschreibung und Standort müssen nicht ausgefüllt werden.\n"
-"Sie dienen nur als Kommentare für den Anwender."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Druckername"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beschreibung"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Standort"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Vorbereiten der Drucker-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Ihr Druckermodell"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"PrinterDrake hat den Modellnamen der Selbsterkennung mit den Modellen in der "
-"Datenbank verglichen, um den besten Treiber zu finden. Die Auswahl kann "
-"jedoch falsch sein, etwa wenn Ihr Drucker nicht in der Datenbank vorhanden "
-"ist. Kontrollieren Sie, ob die Wahl korrekt ist und wählen Sie die "
-"Schaltfläche „Das Modell ist richtig“, wenn der Treiber Ihren Wün "
-"entspricht, andernfalls betägen Sie „Modell auswählen“, um die Auswahl "
-"selbst vorzunehmen.\n"
-"\n"
-"Folgender Drucker wurde gefunden:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Das Modell ist richtig"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Modell auswählen"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Auswahl des Druckertyps"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Über welchen Druckertyp verfügen Sie?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Kontrollieren Sie bitte, ob PrinterDrake Ihern Drucker korrekt erkannt hat. "
-"Falls die Markierung auf einem falschen Gerät oder auf „Rohdaten-Drucker“ "
-"steht, suchen Sie bitte selbst Ihren Drucker in der Liste."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Falls Ihr Drucker nicht aufgeführt ist wählen Sie bitte ein kompatibles bzw "
-"ähnliches Modell (Für Einzelheiten schauen Sie bitte in Ihr Druckerhandbuch)."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI Win-Drucker Konfiguration"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Sie versuchen, eine OKI Win-Laserdrucker einzurichten. Da diese Drucker ein "
-"sehr eigenwilliges Protokol verwenden, funktionieren sie nur, wenn sie am "
-"ersten Parallelport angeschlossen sind. Sollte Ihr Druker an einer anderen "
-"Schnittstelle oder an einer Printserver-Box hängen, schließen Sie ihn bitte "
-"an den ersten Parallelport, bevor Sie versuchen eine Testseite zu drucken ..."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark Tintenstrahl-Konfiguration"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Der Lexmark Tintenstrahl-Druckertriber unterstützt nur lokale Drucker, keine "
-"Drucker auf entfernten Rechnern oder an Printserver-Boxen. Bitte schließen "
-"Sie den Druker direkt an Ihren Rechner oder richten Sie ihn auf dem Rechner "
-"ein, an den er angeschlossen ist."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Um mit Ihrem Lexmark Tintenstrahldrucker drucken zu können, benötigen Sie "
-"die Treiber, die von Lexmark bereitgestellt werden (http://www.lexmark."
-"com/). Gehen Sie auf die amerikanische Seite und wälen Sie die Schaltfäe "
-"„Drivers“. Wählen Sie dann das Drukermodell und geben Sie „Linux“ als "
-"Bertiebssystem an. Sie erhalten die Treiber als RPM-Paket oder als "
-"Shellskript mit interaktiver Grafikinstallation. Sie müssen die Einrichtung "
-"nicht mit dem Lexmark Klicktool vornehmen. Sie können direkt nach der Lizenz "
-"auf „Abbruch“ drücken. Drucken Sie dann Druckkopf-Einrichtungsseiten mit "
-"„lexmarkmaintain“ und justieren Sie damit den Druckkopf."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standard-Einstellungen des Druckers\n"
-"\n"
-"Sie sollten sicherstellen, dass Papiergröße, Farbangaben, Druckqualität "
-"sowie Informationen zu vorhandenem Speicher, Duplexeinheit und Papierfächern "
-"richtig eingestellt sind. Es sei auch angemerkt, dass häufig mit steigender "
-"Druckqualität die Druckgeschwindigkeit sinkt."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Der Parameter %s ist yu groß oder zu klein!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Möchten Sie diesen Drucker („%s“)\n"
-"als Standarddrucker verwenden?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testseiten"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Bitte wählen Sie, welche Testseiten Sie drucken wollen.\n"
-"\n"
-"Bemerkung: Der Druck der Foto-Testseite dauert häufig extrem lange. Bei "
-"Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie gar nicht "
-"gedruckt wird. Normalerweise sollte es ausreichen, die Standard-Testseiten "
-"auszudrucken."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Keine Testseiten"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Drucken"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standard-Testseite"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternative Testseite (US-Format - „Letter“)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternative Testseite (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto-Testseite"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Keine Testseite(n) drucken"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Druck der Testseite(n) ..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-"Druckstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "War der Ausdruck korrekt?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Rohdaten-Drucker"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Sie können sowohl den Befehl „%s <datei>“ verwenden, wenn Sie in einer "
-"Konsole die Datei „<datei>“  drucken wollen, als auch ein grafisches "
-"Hilfsprogramm verwenden: „xpp <datei>“ oder „kprinter <datei>“. Die "
-"grafischen Hilfsprogramme erlauben Ihnen auf einfache Weise den richtigen "
-"Drucker zu wählen und die notwendigen Druckerparameter anzugeben.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diese Befehle auch in der „Druck-Kommando“-Zeile des Druckdialogs "
-"zahlreicher Anwendungen angeben, lassen Sie jedoch den Dateinamen weg, da "
-"die zu druckende Datei von der Anwendung geliefert wird.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Der Befehl „%s“ erlaubt es Ihnen auch zahlreiche Einstellungen für einen "
-"bestimmten Druckauftrag zu ändern. Geben Sie die gewünschten Angaben einfach "
-"in der Kommandozeile mit an, etwa: „%s <Datei>“. "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Um alle existierenden Optionen des Druckers zu erfahren, lesen Sie entweder "
-"die unten angegebene Liste oder betätigen Sie die Schaltfläche „Liste der "
-"Drucker-Optionen“. %s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hier die Liste vorhandener Drucker-Parameter des aktuellen Druckers:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Verwenden Sie den Befehl „%s <Datei>“, um die Datei <Datei> in der "
-"Kommandozeile auszudrucken.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diesen Befehl auch im „Druckkommando“-Feld vieler Programme "
-"angeben. Tragen Sie bitte keinen Dateinamen ein, da dieser vom Programm "
-"ergänzt wird.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Um eine Liste der Drucker-Parameter Ihres Druckers zu erhalten, betätigen "
-"Sie bitte die Schaltfläche „Liste der Drucker-Optionen“."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Verwenden Sie einen der Befehle „%s <Datei>“ oder „%s <Datei>“, um die Datei "
-"<Datei> in der Kommandozeile auszudrucken.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Sie können auch das Grafikwerkzeug „xpdq“ zum setzen der Optionen und "
-"Verwalten der Druckjobs verwenden.\n"
-"Falls Sie KDE als Arbeitsoberfläche nutzen, haben Sie eine Panik-Abschaltung "
-"in Forma des Arbeitsflächensymbols „STOP Printer!“, dass sofort alle "
-"Druckaufträge anhä, wenn Sie es betägen. Das kann beispielsweise dann "
-"hilfreich sein, wenn Sie einen Papierstau in Ihrem Drucker haben.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Die Befehle „%s“ und „%s“ erlauben es Ihnen ebenfals die Optionen eines "
-"spezeiellen Druckjobs zu konfigurieren. Fügen Sie einfach die gewünschten "
-"Einstellungen in der Kommandozeile ein, etwa „%s <Datei>“.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Schließen"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Drucken/Scannen mit „%s“"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drucken auf Drucker „%s“"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste der Drucker-Optionen"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Ihr HP-Multifunktionsgerät wurde automatisch auch zum Scannen eingerichtet. "
-"Sie können nun mit „scanimage“ („scanimage -d hp:%s“ um den Scanner "
-"auszuwählen, falls Sie mehrere angeschlossen haben) aus der Kommandozeile "
-"oder mit „xscanimage“ bzw. „xsane“ - wenn Sie eine grafisches Werkzeug "
-"verwenden wollen - scannen. Wenn sie mit dem GIMP arbeiten wollen, können "
-"Sie dies ebenfalls tun. Wählen Sie einfach im Menü „Datei/Holen“ den "
-"entsprechenden Eintrag. Sie können sich auch mittels „man scanimage“ bzw "
-"„man sane-hp“ in der Kommandozeile weitere Informationen ausgeben lassen.\n"
-"\n"
-"Verwenden Sie für dieses Gerät nicht „ScannerDrake“!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Ihr HP-Multifunktionsgerät wurde automatisch auch zum Scannen eingerichtet. "
-"Sie können nun in der Kommandozeile mittels „ptal-hp %s scan ...“ scannen. "
-"Zur Zeit existieren leider keine grafischen Werkzeuge, mit deren Hilfe Sie "
-"Scannen können - Ihr Multifunktionsgerät wird noch nicht unterstützt. "
-"Weitetre Informationen finden Sie in der Datei „/usr/share/doc/hpoj-0.8/ptal-"
-"hp-scan.html“ auf Ihrem Rechner. Falls Sie einen HP LaserJet 1100 oder 1200 "
-"haben, können Sie nur scannen, wenn Sie die Scanner-Option installiert "
-"haben.\n"
-"\n"
-"Verwenden Sie für dieses Gerät nicht „ScannerDrake“!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Lesen der Treiber-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Drucker-Einstellung transferieren"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Sie können die Druckerkonfiguration, die Sie für den Spooler „%s“ "
-"vorgenommen haben für „%s“, ihren aktuellen Spooler, verwenden. Alle Daten "
-"(Name, Beschreibung, Standort, Verbindungsart und standard "
-"Optionseinstellungen) werden übernommen, Druckjobs in der alten "
-"Warteschlange gehen jedoch verloren.\n"
-"Nicht alle Warteschlangen können übernommen werden:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS unterstützt keine Druker an Novel Servern oder Drucker, die ihre Daten "
-"in ein frei gewähltes Kommando senden.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ unterstützt nur lokale Drucker, entfernte LPD Drucker und Socket/TCP "
-"Drucker.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD und LPRng unterstükeine IPP Drucker.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Warteschlangen, die nicht mit diesem Programm oder „foomatic-configure“ "
-"ertellt wurden, können nicht übertragen werden."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Drucker, die mit den PPD-Dateien ihrer Hersteller oder CUPS-spezifischen "
-"Treibern eingerichtet wurden, können nicht übertragen werden."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markieren Sie die Druckerwarteschlangen, die sie übertragen wollen und "
-"betätigen Sie die Schaltfläche „Übertragen“."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Druckerdaten nicht übertragen"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Ãœbertragen"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Es existiert bereits ein Drucker mit Namen „%s“ unter %s.\n"
-"Durch betätigen der Schaltfäche „Übertragen“ können Sie ihn\n"
-"überschreiben. Sie können dem Drucker auch einen neuen \n"
-"Namen geben oder ihn einfach überspringen."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Der Drucker „%s“ existiert bereits. Wollen Sie ihn wirklich \n"
-"ersetzen?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Neuer Druckername"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Übertragen von „%s“ ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Sie haben Ihren alten Standarddrucker („%s“) übertragen, soll es auch Ihr "
-"Standarddrucker unter dem neuen Drucksystem „%s“ werden?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Aktualisieren der Druckerdaten ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration eines entfernten Druckers"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Netzwerk starten ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Netzwerk jetzt konfigurieren"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Ihr Netzwerk ist nicht konfiguriert"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sie wollen einen entfernten Drucker einrichten. Sie benötigen dafür ein "
-"funktionerendes Netzwerk, aber Ihr Netzwerk ist noch nicht eingerichtet. "
-"Sollten Sie dennoch fortfahren, ohne Ihr Netzwerk einzurichten, ist der "
-"Drucker hinterher nicht zu verwenden. Wie wollen Sie fortfahren?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Weiter ohne Netzwerkkonfiguration"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Das von Ihnen während der Installation eingerichtete Netzwerk kann jetzt "
-"nicht gestartet werden. Testen Sie bitte, ob es nach einem Neustart zur "
-"Verfügung steht. Falls nicht, berichtigen Sie die Einstellungen im Mandrake "
-"Kontrollzentrum unter „Netzwerk & Internet/Verbindung“. Versuchen Sie "
-"anschließend erneut den Drucker mittels „Hardware/Drucker“im Kontrollzentrum "
-"einzurichten."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Es wurde kein aktives Netzwerk gefunden und es konnte auch keine "
-"Netzwerkverbindung hergestellt werden. Kontrollieren Sie bitte Ihre Hardware "
-"und Ihre Softwareeinstellngen. Versuchen Sie anschließend erneut den "
-"entfernten Drucker einzurichten."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Drucksystem neu starten ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "Hoch"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation eines Drucksystems in Sicherheitsebene %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sie sind dabei das Drucksystem %s auf einem Rechner mit Sicherheitsebene %s "
-"zu installieren.\n"
-"\n"
-"Dieses Drucksystem läuft als Dämon (Hintergrundprozess), der auf "
-"Druckaufträge wartet, um sie abzuarbeiten. Da der Dämon auch für andere "
-"Rechner Ihres Netzwerks erreichbar ist,schaffen Sie damit einen möglichen "
-"Angriffspunkt. Aus Sicherheitsgründen werden in dieser Sicherheitsebene "
-"standardmäßig nur einige ausgewählte Dämons gestartet.\n"
-"\n"
-"Wollen Sie wirklich dieses Drucksystem auf diesem Rechner installieren?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Drucksystem beim BS-Start aktivieren"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Das Drucksystem (%s) wird nicht automatisch beim Betriebssystemstart "
-"aktiviert.\n"
-"Es ist möglich, dass der Start durch den Wechsel in eine höhere "
-"Sicherheitsebene deaktiviert wurde, da das Drucksystem einen potentienllen "
-"Angriffspunkt darstellt.\n"
-"\n"
-"Wollen sie den automatischen Start des Drucksystems wieder herstellen?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Suche nach installierter Software"
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Entfernen von LPRng ..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Entfernen des LPD ..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Wählen Sie das Drucksystem"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurieren von Drucker „%s“ ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installieren des Pakets Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Drucker-Optionen"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake vorbereiten ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Anwendungen konfigurieren ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Möchten Sie einen Drucker konfigurieren?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Drucksystem: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. Führen Sie einen "
-"Doppelklick auf einem aus, um ihn zu ändern, als Standarddrucker zu "
-"verwenden, Informtionen über ihn zu erhalten oder einen entfernten CUPS-"
-"Server für Star/OpenOffice zugänglich zu machen."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. Führen Sie einen "
-"Doppelklick auf einem aus, um ihn zu ändern, als Standarddrucker zu "
-"verwenden oder Informtionen über ihn zu erhalten."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Aktualisiere Druckerliste (um alle entfernten CUPS-Drucker anzuzeigen)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Drucksystem ändern"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normaler Modus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Möchten Sie einen weiteren Drucker einrichten?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Drucker-Konfiguration ändern"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drucker %s\n"
-"Was wollen Sie an diesem Drucker ändern?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Ausführen!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Art der Druckeranbindung"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Druckername, Beschreibung, Standort"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Druckerproduzent, Modell, Treiber"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Druckerproduzent, Modell"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Als Standarddrucker verwenden"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Diesen Drucker für StarOffice/OpenOffice.org hinzufügen"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Diesen Drucker für StarOffice/OpenOffice.org entfernen"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Testseite(n) drucken"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Wie dieser Drucker genutzt werden kann"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Drucker entfernen"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Alten Drucker „%s“ entfernen ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standarddrucker"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Der Drucker „%s“ ist jetzt Ihr Standarddrucker“"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Drucker für StarOffice/OpenOffice.org hinzufügen"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"Der Drucker „%s“ wurde erfogrich zu StarOffice/OpenOffice.org hinzugefügt."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Fehler beim Hinzufügen von „%s“ für StarOffice/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Drucker für StarOffice/OpenOffice.org entfernen"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Der Drucker „%s“ wurde erfogrich für StarOffice/OpenOffice.org entfernt."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Fehler beim Entfernen von „%s“ für StarOffice/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Möchten Sie den Drucker „%s“ wirklich entfernen?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drucker „%s“ entfernen ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxies einstellen"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Herzlich willkommen zum Proxy Konfigurationsassistenten.\n"
-"\n"
-"Hier können Sie Ihre HTTP und FTP Proxies mit oder ohne\n"
-"Anmeldung und Passwortabfrage einrichten\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Bitte füllen Sie die HTTP Proxy Informationen aus\n"
-"Falls sie keinen HTTP Proxy wolen, lassen Sie einfach\n"
-"alle Felder leer."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Die URL muss mit „http:“ beginnen"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Die Prot Nummer muss eine Zahl sein!"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Bitte füllen Sie die FTP Proxy Informationen aus\n"
-"Falls sie keinen FTP Proxy wolen, lassen Sie einfach\n"
-"alle Felder leer."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Die URL muss mit „ftp:“ beginnen"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Bitte geben Sie - falls nötig - Kennzeichen und Passwort für den Proxy \n"
-"an. Lassen Sie die Felder leer, falls Sie sie kein Kennzeichen/Passwort \n"
-"wollen."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Kennzeichen"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Passwort"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Passwort (erneut)"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Die Passwörter stimmen nicht überein. Bitte versuchen Sie es eneut!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ich kann keine Partition zu dem _formatierten_ RAID md%d hinzufügen"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ich kann Datei „%s“ nicht schreiben"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid schlug Fehl"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid schlug Fehl (Möglicherweise fehlen die RAID-Tools)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nicht genügend Partitionen für RAID Level %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound System"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Mit dem Dienst anacron können cron-Prozesse auch zu anderen als den \n"
-"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
-"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr läuft, da sonst \n"
-"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
-"werden sollten, nie ausgeführt würden."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
-"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
-"Hilfe kann man den Rechner auch rechtzeitig herunterfahren lassen, \n"
-"bevor die Batterien leer sind."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
-"dafür vorgesehene Zeitpunkt erreicht ist. Lässt die Systemauslastung \n"
-"es zu, werden sog. Batch-Anwendungen gestartet."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
-"zu vordefinierten regelmäßigen Zeiten abzuarbeiten. \n"
-"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
-"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Der GPM-Dienst stellt Ihnen Mausunterstützung auf Text-Konsolen zur \n"
-"Verfügung. Sie erhalten damit die Möglichkeit Ausschneiden und \n"
-"Einfügen von Text wie unter X zu verwenden. In einigen Applikationen \n"
-"können Sie auch Pop-Up-Menüs damit bedienen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake führt Hardwaretests durch, und konfiguriert (falls nötig) \n"
-"neue/geänderte Hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe können Sie \n"
-"HTML-Dateien über HTTP publizieren. Der Server ist CGI-fähig."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
-"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
-"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
-"Datei „/etc/inetd.conf“ freigeschaltet sind. \n"
-"Schalten Sie diesen Dienst ab, können Sie keine der von inetd \n"
-"verwalteten Dienste mehr zugreifen."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Startet Paketfilterung für Linux 2.2er Kerne, um Ihren Rechner \n"
-"durch eine Firewall vor Angriffen aus dem Netz zu schützen."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dieser Dienst lädt die Tastaturbelegung, die in der Datei \n"
-"„/etc/sysconfig/keyboard“ angegeben ist. Mittels „kbdconfig“ \n"
-"können Sie diese Einstellung ändern. Schalten Sie diesen Dienst ab, \n"
-"müssen Sie ab dem nächsten Systemstart mit der amerikanischen \n"
-"Tastatur vorlieb nehmen."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatische Neuerstellung der Kern-Header in /boot für\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automatische Erkennung und Konfiguration neuer Hardware während des \n"
-"Betriebssystemstarts."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf versucht beim Betriebssystemstart einige Verwaltungsaufgaben \n"
-"auszuführen."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Der Dienst lpd ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
-"diesen Dienst abschalten werden Druckaufträge nicht mehr abgearbeitet.\n"
-"Hauptaufgabe von lpd ist es, Druckaufträge an den jeweiligen \n"
-"zuständigen Drucker (dieser kann auch einen anderen Rechner hängen) \n"
-"zu senden."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Der Linux Virtual Server kann verwendet werden, um um ein \n"
-"hochperformanten Hochverfügbarkeitsserver aufzusetzen."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Der Dienst named (BIND) stellt ihnen einen Server zur Verfügung, \n"
-"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
-"Ein solcher Dienst wird „Domain Name Server“ (DNS) genannt. \n"
-"Falls Sie nur einen Rechner besitzen, mit dem Sie per Modem/ISDN ins \n"
-"Netz gehen, benötigen Sie diesen Dienst nicht."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Dieser Dienst ist verantwortlich dafür, dass alle Netzwerk-Dateisysteme \n"
-"(NFS) bei Systemstart eingehängt werden, etwa SMB (Lan Manager/Windows) \n"
-"und NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Dieser Dienst aktiviert Netzwerkgeräte (etwa Netzwerkkarten), die \n"
-"so konfiguriert wurden, dass sie ab dem Systemstart zur Verfügung \n"
-"stehen sollen."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Dieser Dienst stellt Ihnen einen solchen Server zur Verfügung. \n"
-"Konfiguriert wird er in der Datei „/etc/exports“."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Der Dienst nfslock stellt Ihnen hierfür Locking-Mechanismen zur \n"
-"Verfügung, damit eine Datei nicht durch mehrere Personen \n"
-"gleichzeitig verändert werden kann."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Schaltet beim Betriebssystemstart automatisch die „Num“-Taste für \n"
-"die virtuellen Konsolen und XFree ein."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Unterstützung für den OKI 4w und kompatible WinDrucker."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
-"oder Modems verwenden zu können. Dieser Dienst wird nur gestartet, \n"
-"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
-"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
-"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
-"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
-"aktiviert sein."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ist ein E-Mail Transport-Dienst. Mit seiner Hilfe werden \n"
-"E-Mails zwischen verschiedenen Rechnern weitergeleitet."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
-"des Zufallszahlengenerators, um ihn beim nächsten Systemstart \n"
-"wieder zu restaurieren. Die Qualität erzeugter Zufallszahlen \n"
-"wird dadurch verbessert."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Weist Roh-Geräten ein blockorientiertes Gerät (etwa eine\n"
-"Festplattenpartition) zu. Dies wird für Anwendungen wie\n"
-"etwa ORACLE benötigt"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Der Dienst routed ermöglicht ein automatisches Aktualisieren der \n"
-"IP-Routing-Tabellen mittels RIP Protokoll. Zwar wird RIP in kleinen \n"
-"Netzwerken verwendet, jedoch wird für komplexere Netzwerke ein \n"
-"anderer Dienst benötigt."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Der Dienst rstat ermöglicht es Anwendern anderer Rechner des \n"
-"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Der Dienst rusers ermöglicht es Anwendern anderer Rechner \n"
-"herauszubekommen, welche Benutzerkennzeichen auf diesem Rechner \n"
-"gerade angemeldet sind."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
-"momentan angemeldeter Benutzerkennzeichen übermittelt zu bekommen \n"
-"(ähnlich wie finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Starten des Sound-Systems Ihres Rechners"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
-"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
-"aktiviert zu haben."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Lädt die Treiber für Ihre USB-Geräte."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
-"damit XFree gestartet werden kann!"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Wählen Sie, welche Dienste\n"
-"automatisch beim Systemstart\n"
-"aktiviert werden sollen"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Drucken"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Gemeinsamer Dateizugriff"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Fernwartung"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Datenbankserver"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Dienste: %d aktiviert von %d registrierten."
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktiv"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "gestoppt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Dienste und Dämonen"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Es existieren leider keine\n"
-"weiteren Informationen zu\n"
-"diesem Dienst."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Bei BS-Start"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stopp"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Danke, dass Sie sich für Mandrake Linux 8.2 entschieden haben"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Willkommen in der Open Source Welt."
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Der Erfolg von MandrakeSoft basiert auf dem Prinzip freier Software. Ihr "
-"neues Betriebssystem ist das Ergebnis einer weltweiten Zusammenarbeit der "
-"GNU/Linux-Gemeinde."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Betreten Sie die Welt der Freien Software"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Wollen Sie die Open Source Gemeinde kennen lernen? Ein Teil von ihr werden? "
-"Beteiligen Sie sich an den Diskussionsforen, die Sie auf unseren „Community“-"
-"Seiten finden."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet und Messaging"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 stellt Ihnen die beste Softwareauswahl bereit, um auf "
-"alles, was das Internet bietet, zugreifen zu können. Surfen Sie im Web mit "
-"Mozilla oder Konqueror, bearbeiten Sie E-Mails und verwalten Sie persönliche "
-"Informationen mit Evolution, KMail oder zahlreichen anderen Programmen."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia und Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 reizt Ihren Multimediarechner voll aus! Verwenden Sie die "
-"neuste Software, um Audiodateien abzuspielen, Ihre Fotos und Bilder zu "
-"bearbeiten sowie Videos abzuspielen..."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Entwicklungsplattform"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 ist die ultimative Entwicklungsplattform. Nutzen Sie die "
-"volle Power des GNU C Compilers sowie der besten Open Source "
-"Entwicklungsumgebungen."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrollzentrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Das Mandrake Linux 8.2 Kontrollzentrum ist der zentrale Ort, an dem Sie Ihr "
-"System nach Ihren Wünschen anpassen können."
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Arbeitsumgebungen"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 bietet 11 verschiedene grafische Arbeitsumgebungen und "
-"Windowmanager. Darunter GNOME 1.4, KDE 2.2.2 und Window Maker 0.8"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Server Software"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Verwandeln Sie Ihren Rechner mit ein paar Mausklicks in einen "
-"leistungsfähigen Server: Web, E-Mail, Firewall, Router, Datei- und "
-"Druckserver, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spiele"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 bietet die besten Open Source Spiele - Arcade, Baller, "
-"Karten, Sport, Strategie, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Sie wollen GNU/Linux in eine einfache, schnelle und vor Allem freie Weise "
-"erlernen? MandrakeSoft bieten ein freies Linux Training sowie einen Weg "
-"Ihren Fortschirtt mit unserem Online Trainingcenter „MandrakeCampus“ zu "
-"testen."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Qualitativ hochwertiger Support aus der GNU/Linux Gemeinde und von "
-"MandrakeSoft ist nur einen Mausklick weit entfernt. Sind Sie bereits ein "
-"„alter Hase“ in Sachen GNU/Linux, werden Sie ein Experte, und teilen Sie Ihr "
-"Wissen mit Anderen auf unserer Support-Seite."
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Unsere Consultants sind bereit, Ihnen für alle Ihre IT-Projekte individuelle "
-"Lösungen anzubieten, die genau Ihren Bedürfnissen entsprechen. MandrakeSoft "
-"als erfahrener Linux-Distributor bietet eine echte IT-Alternative für Ihr "
-"Unternehmen."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Unsere Linux Komplettlösungen, Sonderangebote und Mandrake Fan-Artikel "
-"bekommen Sie in unserem E-Shop"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Weitere Informationen über MandrakeSofts professionelle Dienstleistungs- und "
-"gewerbliche Angebote erhalten Sie unter:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact/"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Pakete Installieren ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ich kann Ihre Partitionstabelle nicht lesen, sie ist fehlerhaft :-(\n"
-"Um fortfahren zu können setze ich die fehlerhaften Partitionen zurück"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fehler!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ich kann die benötigte Abbild-Datei „%s“ nicht finden."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Auto-Installationskonfigurator"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
-"Möglichkeit ist gefährlich und sollte mit Vorsicht verwendet werden!\n"
-"\n"
-"Sie können mit diesem Werkzeug die Installation, die Sie auf Ihrem\n"
-"Rechner erneut durchspielen, wobei Sie an einigen Stellen interaktiv\n"
-"Einfluss nehmen zu können.\n"
-"\n"
-"Aus Sicherheitsgründen wird die Partitionierung und Formatierung nie\n"
-"automatisch durchgeführt.\n"
-"\n"
-"Wollen Sie fortfahren?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automatische Konfiguration der Schritte"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Bitte wählen Sie für jeden Schritt, ob er wie bei Ihrer Installation "
-"vorgenommen werden soll, oder ob Sie ihn manuell durchführen wollen."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Willkommen.\n"
-"\n"
-"Die Parameter der Autoinstallation sind in den Abschnitten rechts verfügbar."
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratuliere!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die Diskette wurde erfolgreich erstellt.\n"
-"Sie können die Installation nun automatisch durchführen."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Auto-Installation"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Eintrag hinzufügen"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Letzten Eintrag entfernen?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Dämon Report\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "Vortschritt"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Systemdateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Backup-Dateien auf der Festplatte ..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Benutzerdateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Festplattenbackup in Bearbeitung ..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Andere Dateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"Dateiliste per FTP senden: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP Verbindungsprobleme: Es war nicht möglich, Ihre Dateien per FTP zu "
-"übertragen.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Fehler beim Verschicken der Mail. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Dateiauswahl"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-"Wählen Sie die Dateien oder Verzeichnisse und betätigen Sie die Schaltfläche "
-"„Hinzufügen“"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Bitte wählen Sie alle benötigten Parameter.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Diese Optionen kön alle Ihre Dateien im Verzeichnis „/etc“ sichern und "
-"wiederherstellen\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sichern Ihrer Systemdateien (Verzeicnis „/etc“)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Inkrementelles Backup (alte Backups nicht überschreiben)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Keine kritischen Dateien (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Mit dieser Option sind Sie in der Lage, jede Version Ihres \n"
-"„/etc“ Verzeichnisses wiederherzustellen."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Bitte wählen Sie alle Kennzeichen, deren Dateinen mitgesichert werden sollen."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Die Browser-Caches nicht archivieren."
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Markierte entfernen"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Benutzer"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "FTP-Verbindung zum erstellen der Sicherungskopien verwenden"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Rechnernamen oder IP eingeben."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Bitte geben Sie das Verzeichnis an,\n"
-" in dem die Archive erstellt werden sollen."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Bitte geben Sie Ihr Benutzerkennzeichen ein"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Bitte geben Sie Ihr Passwort ein"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Passwort behalten"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP Verbindung"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sichere Verbindung"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Sicherungskopie auf CD/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Bitte wählen Sie Ihren CD-Paltz"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Kontrollieren Sie, ob Sie ein CDRW-Medium verwenden."
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Kontrollieren Sie, ob Sie die CDRW vorher löschen wollen."
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Bitte markieren, falls Sie \n"
-"„install boot“ auf Ihrer CD haben wollen."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Bitte geben Sie den Gerätenamen \n"
-"Ihres Brenners an, etwa „0,1,0“."
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Auf Bandlaufwerk sichern"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Bitte geben Sie den Gerätenamen fü Archivierung an."
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Bitte geben Sie die Maximalgröße \n"
-"für DrakBackup an."
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Bitte geben Sie das Archivverzeichnis an:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Quota für Backup-Datei verwenden."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Netzwerk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Festplatte/NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "stündlich"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "täglich"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "wöchendlich"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "monatlich"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Dämon verwenden"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Bitte wählen Sie das Zeitintervall \n"
-"zwischen zwei Sicherungen."
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Bitte wählen Sie ein\n"
-"Sicherungsmedium."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Festplatte mit Dämin verwenden"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTP mit Dämon verwenden"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Stellen Sie sicher, dass der Cron-Dämon als Dienst aktiviert ist."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "E-Mail Bericht nach jedem Sicherungsvorgang an: "
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Was"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Wo"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Wann"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Mehr Parameter"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "DrakBackup Konfiguration"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Bitte wählen Sie wohin Sie die Sicherungskopien machen wollen."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "auf Festplatte"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "über Netzwerk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Bitte wählen Sie, was Sie sichern wollen"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "System sichern"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Benutzerkennzeichen sichern"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Benutzerkennzeichen auswählen"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sicherungsquellen: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemdateien:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Benutzerdateien:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Sonstige Dateien:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Auf Festplatte sichern unter: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Via FTP sichern auf: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t Benutzer: %s\n"
-"\t\t Pfad: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Optionen:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tKeine Systemdateien\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSicherungen verwenden „tar“ und „bzip2“\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSicherungen verwenden „tar“ und „gzip“\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Dämon (%s) enthält:\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t- Festplatte.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t- CD-ROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t- Netzwerk per FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t- Netzwerk per SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Keine Konfiguration. Wählen Sie dein Assistenten oder Fortgeschritten.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste der wiederherzustellenden Daten:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste der beschädigten Daten:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Bitte entfernen Sie die Markierung oder löschen Sie sie das nächste Mal."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Die Sicherungen sind beschädigt."
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "            Alle Ihre gewälhten Daten wurden            "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "    erfolgreich auf %s wiederhergestellt   "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "    Konfiguration wiederherstellen   "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK, die übrigen Dateien zu aktualisieren."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Liste wiederherzustellender Kennzeichen (letztes Datum per Kennzeichen ist "
-"wichtig)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Systemdateien sichern vor:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Bitte wählen Sie, welches Datum wiederhergestellt werden soll."
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Auf Festpaltte sichern"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Von Festplatte wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Bitte geben Sie das Verzeichnis an, in dem die Sicherungskopien liegen"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Wählen Sie ein anderes Medium von dem Sie wiederherstellen wollen."
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Anderes Medium"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "System wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Benutzerkennzeichen wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Sonstiges wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Auswahl des Pfades der wiederhergestellt werden soll (statt „/“"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Erstelle Sicherung vor dem Wiederherstellen (nur für inkrementelle "
-"Sicherungen)."
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Benutzerkennzeichen vor dem Wiederherstellen entfernen."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Alle Sicherungen wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Benutzergeführte Wiederherstellung"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Hilfe"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "<- Zurück"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Speichern"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Sicherung erstellen"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Weiter ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Bitte erstellen Sie eine Sicherung, bevor Sie wiederherstellen können.\n"
-"oder stellen Sie sicher, dass der Pfad zu den Sicherungen korrekt ist."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Sendmail Fehler\n"
-"  Ihre Bericht-Mail konnte nicht versandt werden.\n"
-"  Bitte richten Sie Sendmail korrekt ein."
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Zu installierende Pakete"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Fehler bei der Ãœertragung via FTP.\n"
-"Bitte korrigieren Sie Ihre FTP-Konfiguration."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Bitte wählen Sie die wiederherzustellenden Daten..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Bitte wählen Sie ein Sicherungsmedium..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Bitte wählen Sie die zu sichernden Daten..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Keine Konfigurationsdatei gefunde.\n"
-"Bitte wählen Sie den „Assistenten“ oder „Erweitert“."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "In Entwicklung, haben Sie noch etwas Geduld ..."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Systemdateien sichern"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Benutzerdateien sichern"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Andere Dateien sichern"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Fortschritt"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Datenüagung via FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Dateien übertragen ..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Liste der Daten, die auf CD-ROM sollen."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Bitte geben Sie die CD-Brenngeschwindigkeit ein"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Bitte geben Sie den CD-Brenner an (etwa 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Bitte markieren, falls Sie „install boot“ auf Ihrer CD haben wollen."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Jetzt Sicherung anhand der Konfigurationsdatei erstellen."
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Sicherungskonfiguration anzeiegen"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Assistentengestützte Konfiguration"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Expertenkonfiguration"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Jetzt sichern"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "DrakBackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-" In diesem Schritt erlaubt Ihnen DrakBackup folgende Änderungen:\n"
-"\n"
-" - Kompressionsmodus:\n"
-"    \n"
-"      Mit der „bzip2“ Kompression, werden Ihre Daten\n"
-"      besser als mit „gzip“ komprimiert (ca. 2-10 %).\n"
-"      Standardmäßig ist dier Modus deaktiviert, da er\n"
-"      mehr Zeit benötigt (bis zu 1.000%).\n"
-" \n"
-" - Aktualisierungsmodus:\n"
-"\n"
-"      Mit dieser Option können Sie Ihre Sicherungskopie\n"
-"      aktuialisieren. Das ist momentan nicht sehr sinnvoll,\n"
-"      da Sie Ihre Kopie auspacken müssen, um sie \n"
-"      aktualisieren zu können.\n"
-"      \n"
-" - Der „.backupignore“-Mode:\n"
-"\n"
-"      Vie bei dem Programm „cvs“, wird DrakBackup alle\n"
-"      Dateien/Ordner, die in der Datei „.backupignore“\n"
-"      des aktuellen Verzeichnisses aufgeführt sind,\n"
-"      von der Sicherung ausschließen.\n"
-"      Beispiel:\n"
-"         > cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Einige der Sendmail-Fehler beruhen auf einer\n"
-" fehlerhaften PostFix Konfiguration. Um sie zu\n"
-" beheben müssen Sie „myhostname“ oder „mydomain“\n"
-" in „/etc/postfix/main.cf“ korrigieren.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-" - Systemdateien sichern:\n"
-"       \n"
-"\tDiese Option erlaub es Ihnen Ihr „/etc“ Verzeichnis\n"
-"\tmit den darin enthaltenen Konfigurationsdateien zu\n"
-"\tsichern. Seien Sie vorsichtig, damit Sie während der\n"
-"\tWiederherstellung folgende Dateien nicht überschreiben:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Benutzerdateien sichern:\n"
-"\n"
-"\tDiese Option erlaubt es Ihnen die Benutzerkenn-\n"
-"\tzeichen zu wählen, deren Daten gesichert werden\n"
-"\tsollen.\n"
-"\tEs ist sinnvoll, die Browser-Caches vom Sichern\n"
-"\tauszunehmen, um Sicherungsplatz zu sparen.\n"
-"\n"
-" - Andere Dateien sichern:\n"
-"\n"
-"\tMit dieser Option können Sie weitere Dateienn\n"
-"\tzum Sichern vorsehen. Sollten Sie diese Version\n"
-"\tverwenden, können Sie momentan keine inkre-\n"
-"\tmentellen Aktualisierungen vornehmen.\n"
-"\n"
-" - Inkrementelle Archivierung:\n"
-"\n"
-"\tInkrementelle Archivierung ist die mächtigste\n"
-"\tder vorhandenen Optionen. Sie erlaubt es\n"
-"\tIhnen beim ersten Aufruf eine komplette\n"
-"\tSicherungskopie Ihres Systems zu erstellen und\n"
-"\tanschließnd nur noch Änderungen zu speichern.\n"
-"\tSomit sind Sie in der Lage, während des Wieder-\n"
-"\therstellens, den Datenbestand eines bestimmten\n"
-"\tZeitpunkts zu erzeugen.\n"
-"\tSollten sie diese Alernative nicht gewählt haben,\n"
-"\twerden die alten Sicherungen vor dem Ertellen\n"
-"\teiner neuen Sicherungskopie gelöscht.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by Sebastien DUPONT <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-"Seien Sie vorsichtig, wenn Sie FTP-Sicherungskopien verwenden, \n"
-"da nur vollständig erstelle Sicherungskopien sum Server kopiert.\n"
-"werden. Die Sicherungskopie muss also erst lokal auf Ihrem \n"
-"Rechner erstellt werden.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Wiederherstellungsprobleme:\n"
-"\n"
-"DrakBackup wird bei der Wiederherstellung alle Dateien \n"
-"kontrollieren, bevor sie wiederhergestellt werden.\n"
-"Da vor der Wiederherstellung alle Dateien im \n"
-"Zielverzeichnis von DrakBackup gelöscht werden, \n"
-"gehen alle darin entghaltenen Daten verloren! \n"
-"Seien Sie daher vorsichtig und ändern Sie die Sicherungskopien \n"
-"nicht manuell.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Die Installation von %s schlug Fehl. Folgender Fehler trat auf:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Suche installierte Schriften"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Auswahl installierter Schriften zurücksetzen"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "Alle Schriften analysieren"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "Keine Schriften gefunden"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "Fertig"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "Ich konnte keine Schriften in Ihren eingehängten Partitionen finden"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Neuwahl korrekter Schriften"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "Konnte keine Schriften finden.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Suche installierter Schriften"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopiere Schriften"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation von TrueType Schriften"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Bitte warten Sie ttmkfdir arbeitet ..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "TrueType Installation beendet"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konvertieren der Schriften"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "Erzeuge „type1inst“"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscriptreferenz"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf-Schriftkonvertierung"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm-Schriftkonvertierung"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Temporäre Dateien löschen"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Neustart des X-FontServers"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Schriftdateien löschen"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs Neustart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Stellen Sie sicher, das Sie das Recht haben, die Schriften die Sie \n"
-"in Ihr System einbinden wollen, zu verwenden.\n"
-"\n"
-"- Sie können die Schriften auf normalem Weg einbinden. In seltenen Fällen \n"
-"können defekte Schriften den X-Server lahmlegen."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Schriften einbinden"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Windows-Schriften verwenden"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Schiften deinstallieren"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Erweiterte Einstellungen"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Font-Liste"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Wählen Sie die Programme, die die Schriften verwenden sollen:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generische Drucker"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Wählen Sie eine Schriftdatei bzw. ein Verzeichnis und betätigen Sie "
-"„Hinzufügen“"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Liste installieren"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Klicken Sie hier, wenn Sie sicher sind."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Hier, falls nicht."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Markierung löschen"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Alle auswählen"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Liste entfernen"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Vortests"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Schriften auf Ihren Rechner kopieren"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installiere und konvertiere Fonts"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Nach der Installation"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Nach dem Entfernen"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Teilen der Internet-Verbindung"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Teilen der Internetverbindung momentan eingeschaltet."
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie aktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "deaktivieren"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "Verwerfen"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "neu konfigurieren"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Server deaktivieren ..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Teilen der Internet-Verbindung ist nun abgeschaltet."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Teilen der Internet-Verbindung momentan abgeschaltet."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie deaktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktivieren"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Server aktivieren ..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Teilen der Internetverbindung ist nun eingeschaltet."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
-"Internetverbindung mit einem lokalem Netzwerk teilt.\n"
-"\n"
-"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
-"lokales Netz (LAN) aufsetzen können."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Schnittstelle %s (verwendet Modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Schnittstelle: %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Sie haben keine Netzwerkkarte!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
-"HardDrake, bevor Sie weiter machen."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netzwerkkarte"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sie haben nur eine konfiguriertes Netzwerkgerät an Ihrem Rechner:\n"
-"\n"
-"%s\n"
-"\n"
-"Ich setze ihr lokales Netz damit auf."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bitte wählen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
-"verbunden ist."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Ihr Netzwerk ist bereits konfiguriert"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Warnung, das Netzwerkgerät „%s“ ist bereits konfiguriert.\n"
-"\n"
-"Wollen Sie eine automatische Neukonfiguration?\n"
-"\n"
-"Sie können auch eine manuelle Einrichtung vornehmen - dafür sollten Sie "
-"jedoch wissen, wie das funktioniert."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatische Rekonfiguration"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration anzeigen"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuelle Konfiguration von „%s“:\n"
-"\n"
-"Netzwerk: %s\n"
-"IP-Adresse: %s\n"
-"IP-Eigenschaften: %s\n"
-"Treiber: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Ich kann Ihre aktuelle Konfiguration beibehalten und annehmen, dass Sie "
-"bereits einen DHCP-Server eingerichtet haben. Stellen Sie in diesem Fall "
-"sicher, dass ich Ihr Klasse-C Netzwerk korrekt erkannt habe. Ich werde es "
-"weder neukonfigurieren, noch Ihre DHCP-Konfiguration ändern.\n"
-"\n"
-"Ich kann jedoch auch Ihre Schnittstelle neu konfigurieren und einen DHCP-"
-"Server für Sie aufsetzen.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokales Klasse-C Netzwerk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Diese) DHCP-Server IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Neu konfigurieren des Geräts und des DHCP-Servers"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Das lokale Netzwerk endet nicht auf „.0“ - bereinige."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Es liegt ein möglicher LAN-Adressen Konflikt in der Konfiguration\n"
-"von %s vor!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"WARNUNG: Ich habe eine eine Firewall-Konfiguration gefunden. \n"
-"Möglicherweise müssen Sie nach der Installation einige Einstellungen \n"
-"von Hand vornehmen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurieren ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skripte konfigurieren, Software installieren, Dienste starten ..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme beim Installieren von Paket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Es wurde alles eingerichtet.\n"
-"Sie können Ihre Internetverbindung nun anderen Rechnern in Ihrem \n"
-"lokalen Netz mittels automatischer Netzwerk-Konfiguration (DHCP) \n"
-"teilen."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Die Einstellungen wurden bereits vorgenommen, sie sind nur nicht aktiviert."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die Einstellungen wurden bereits vorgenommen und sind aktiv."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Teilen der Internetverbindung wurde noch nicht konfiguriert."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Teilen der Internetverbindung - Konfiguration"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Willkommen zu DrakGW -\n"
-"das Werkzeug zum Teilen Ihrer Internetverbindung\n"
-"\n"
-"%s\n"
-"\n"
-"Wählen Sie „Konfigurieren“ wenn Sie den Assistenten starten wollen."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netzwerk Konfiguration (%d Karten)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profil löschen..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Zu löschendes Profil: "
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Neues Profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Name des neuen Profils (es wird als Kopie des aktuellen erstellt):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Rechnername: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetzugang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Schnittstelle:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Bitte Warten"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Internet-Zugang konfigurieren"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN Konfiguration"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Treiber"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Schnittstelle"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Netzwerk konfigurieren"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Hier starten Sie den Assistenten ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Anwenden"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Einen Moment ... ich richte die Konfiguration ein"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Verbunden"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nicht Verbunden"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Verbinden ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Trenne Verbindung ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Schnittstelle eingerichtet.\n"
-"Sie können dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Konfiguration"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot-Protokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Beim Hochfahren gestartet"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP Klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "Jetzt aktivieren"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "Jetzt deaktivieren"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Diese Schnittstelle wurde noch nicht eingerichtet.\n"
-"Starten Sie den Konfigurationsassistenten im Hauptfenster."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Internetverbindung eingerichtet.\n"
-"Sie können dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Verbindungstyp: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameter"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Netzwerkkarte"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Sicherheitsebene einstellen"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollzentrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Wählen Sie das Werkzeug, das Sie verwenden wollen"
-
-# ../../standalone/drakxtv_.c:37ç
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (Kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (Kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (Kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (Kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Osteuropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Westeuropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australien"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Neuseeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Südafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentinien"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Bitte geben Sie Ihre Fernsehnorm und Region ein"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Fernsehnorm:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Region:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Sendersuche ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Sendersuche..."
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "Verwendung: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wollen Sie, dass die Rücktaste auf den Konsolen Entfernen sendet?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "CD-ROM wechseln"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Bitte legen Sie die Installations-CD-ROM in Ihr Laufwerk und drücken \n"
-"Sie dann „OK“. Falls Sie sie nicht vorliegen haben, drücken Sie \n"
-"„Abbruch“."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ich bin nicht in der Lage, eine Live Aktualisierung durchzuführen!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Die Einstellungen wurden vorgenommen, werden jedoch erst nach einer "
-"Neuanmeldung wirksam"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "LogDrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Nur für diesen Tag zeigen"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Datei/_Neu"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datei/_Öffnen"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datei/_Speichern"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datei/Speichern_als"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datei/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Optionen"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Optionen/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hilfe"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/_Hilfe/_Ãœber..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Benutzer"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Nachrichten"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "SysLog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Erklärung der Mandrake Programme"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "Suche starten"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ihre Logbücher betrachen"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Einstellungen"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "Ãœbereinstimmung mit"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "keine Ãœbereinstimmung mit"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Dateien wählen"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Inhalt der Logbücher"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "E-Mail/SMS Benachrichtigung"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Einen Moment, ich durchsuche: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Mail/SMS Benachrichtigungskonfiguration"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Herzlich willkommen zum E-Mail/SMS Konfigurationsassistenten.\n"
-"\n"
-"Hier können Sie Ihr Benachrichtigungssystem einrichten.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Dienste einstellen"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Sie weden benachrtichtigt, falls einer der gewählten Dienste nichtmehr "
-"verfügbar ist."
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "Einstellungen laden"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Sie erhalten eine Nachricht, wen die Load über diesen Wert steigt"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "Benachrichtigungskonfiguration"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Stellen Sie ein, wie das System Sie benachrichtigen soll"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Speichern unter..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Kein „serial_usb“ gefunden\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Die dritte Maustaste emulieren?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s an %s gefunden. Wolen Sie ihn einrichten?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Wählen Sie einen Scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Dieser %s Scanner wird nicht unterstützt"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot Gerät"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Dieser %s Scanner muss von PrinterDrake konfiguriert werden.\n"
-"Sie können Pronterdrake im Mandrake-Kontrollzentrum im Hardware-Bereich "
-"starten."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewall-Konfiguration"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewall-Konfiguration"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Sie haben bereits eine Firewall eingerichtet.\n"
-"Wählen Sie die Schaltfläche „Konfigurieren“,\n"
-"um sie zu löschen oder zu verändern."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Wählen Sie die Schaltfläche „Konfigurieren“,\n"
-"um eine Standard-Firewall einzurichten."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Sprache auswählen"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Installationsart auswählen"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Festplatten suchen"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Maus konfigurieren"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tastatur auswählen"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sicherheit"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dateisysteme einrichten"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partitionen formatieren"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Zu installierende Pakete"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "System installieren"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Benutzer hinzufügen"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Dienste konfigurieren"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "BS-Starter installieren"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Startdiskette erstellen"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X konfigurieren"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Systemaktualisierungen"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Installation beenden"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"TinyFirewall Konfigurierer\n"
-"\n"
-"Hiermit konfigurieren Sie eine persönliche Firewall für diesen\n"
-"Mandrake Linux Rechner. Sollten Sie an einer speziellen ausgereiften\n"
-"Firewall-Lösung interessiert sein, schauen Sie sich nach der speziell\n"
-"dafür entwickelten MandrakeSecurity Firewall Distribution um."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Wir fragen Sie nun, welchen Diensten Sie direkten Internetzugang\n"
-"gestatten wollen. Bitte machen Sie sich sorgfältig Gedanken über diese\n"
-"Fragen. Es geht hierbei schließlich um die Sicherheit Ihres Systems!\n"
-"\n"
-"Bitte schotten Sie jeden Dienst, den sie aktuell nicht verwenden, vom \n"
-"Netz ab. Sie können die vorgenommenen Einstellungen mit Hilfe dieses \n"
-"Programms jederzeit wieder ändern!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Betreiben Sie auf Ihrem Rechner einen Web-Server, der im gesamten\n"
-"Internet sichtbar sein soll? Falls der Server nur auf Ihrer Maschine\n"
-"zugreifbar sein soll, können Sie hier getrost NEIN antworten.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen Name-Server auf Ihrem Rechner? Falls Sie keinen\n"
-"Eingerichtet haben, um dem gesamten Internet IP und Bereichsinformationen\n"
-"anzubieten, antworten Sie hier NEIN.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Wollen Sie eingehende Secure Shell (ssh) Verbindungen gestatten?\n"
-"Es handelt sich hierbei um einen Ersatz für Telnet. Falls sie noch\n"
-"Telnet verwenden, sollten Sie definitiv auf dieses Protokoll wechseln.\n"
-"Telnet überträgt Ihre gesamte Kommunikation (also auch Passwörter)\n"
-"UNVERSCHLÃœSSELT! Sie bieten damit einem potentiellen Angreife ein\n"
-"leichtes Spiel. Die SSH hingegen verschlüsselt die komplette\n"
-"Kommunikation und warnt sogar falls sie eine Unregelmäßigkeit bemerkt."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Wollen Sie eingehende Telnet-Verbindungen gestatten?\n"
-"Dienst extrem unsicher, wie wir bereits früher erwähnten. Wir empfehlen\n"
-"Ihnen daher nachdrücklich mit NEIN zu antworten und im Bedarfsfall auf\n"
-"die SSH auszuweichen.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Betreiben Sie einen FTP Server der aus dem Internet zugreifbar sein soll?\n"
-"Falls ja, sollten Sie ihn jedoch nur für „anonymen Transfer“ verwenden,\n"
-"da das Protokoll keine Verschlüsselung übertragener Passwörter vorsieht."
-"Verwenden Sie „scp“ aus dem SSH Paket zum verschlüsselten\n"
-"Datentransfer zwischen zwei Rechnern.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen Mail-Server? Falls Sie Ihre Nachrichten mit\n"
-"einem textbasierten E-Mail Programm wie pine oder mutt schreiben\n"
-"ist dies vermutlich der Fall. Andernfalls sollten Sie den Dienst\n"
-"abschalten.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen POP oder IMAP Server? Sie würden damit\n"
-"Postfächer für nicht-web-basierten E-Mail Zugriff über diese\n"
-"Maschine bereitstellen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Sie scheinen einen 2.2er Kern zu verwenden. Falls Sie Ihre\n"
-"IP-Adresse automatisch im lokalen Netzwerk erhalten sollen,\n"
-"müssen wir dies gestatten. Ist das bei Ihnen der Fall?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Wird die Zeit Ihres Rechners automatisch mit anderen Rechnern\n"
-"synchronisiert? Dies ist häufig ab mittelgroßen UNIX/Linux Betrieben\n"
-"der Fall. Damit wird ein einheitliches Zeitschema, etwa für die\n"
-"Datensicherung zugrunde gelegt. Wenn Sie nicht in einem größeren\n"
-"Betrieb arbeiten oder noch nie etwas zu diesem Thema gehört haben,\n"
-"trifft es für Sie vermutlich nicht zu."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfiguration beendet. Soll ich die Änderungen auf Platte schreiben?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ich kann „%s“ nicht öffnen: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ich kann „%s“ nicht zum Schreiben öffnen: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nein, ich benötige kein DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, ich benötige DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nein, ich benötige kein NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, ich benötige NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Nicht speichern"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Speichern und beenden"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Firewall-Konfigurationsassistent"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nein (Vom externen Netz abschirmen)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ja (durch die Firewall erlauben)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Bitte warten, Kontrolle der installierten Pakete ..."
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Fehler bein Versuch die gewünschten Pakete (%s und Bastille) zu "
-"installieren!\n"
-"Versuchen Sie es manuell."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netzwerk-Computer (Klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-Server, SMB-Server, Proxy-Server, SSH-Server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Werkzeuge für Ihren Palm Pilot oder Ihren Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeitsplatzrechner"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domänen- (DNS) und Netzwerk Informationsserver (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-Programme: Textverarbeitung (KWord, Abiword), Tabellenkalkulation "
-"(KSpread, Gnumeric), PDF-Betrachter, usw."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio Programme: MP3- und Midi-Abspieler, Mixer, usw."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bücher und HOWTOs zu GNU/Linux und Freier Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, usw."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia / Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Programme für Mail, News, WWW, FTP und Chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Datenbank"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgeSQL oder MySQL Datenbankserver"
-
-#
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Werkzeuge, die die Konfiguration Ihres Rechners erleichtern"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia / Sound"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Werkzeuge"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolen-Werkzeuge"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-"Postfix E-Mail-Server und\n"
-"Inn Diskussionsforen-Server"
-
-#
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetrechner"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediarechner"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Weitere Arbeitsoberflächen (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Das K Desktop Environment, die Standard-Arbeitsoberfläche mit einer Sammlung "
-"zugehöriger Programme"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische Arbeitsoberfläche"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache und Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Werkzeuge zur Erstellung und zum Brennen von CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Büro-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "GNOME, IceWM, Window Maker, Enlightenment, Fvwm, usw."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Bildverarbeitungsprogramme wie der GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C und C++ Entwicklung: Bibliotheken, Programme und Include-Dateien"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netzwerkrechner Server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spiel-Station"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoabspieler und Editoren"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia / Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Spiele: Arcade-, Brett-, Strategiespiele, usw."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Programme zum E-Mail bzw. News lesen und senden (pine, mutt, tin, ...)sowie "
-"zum durchstöbern des WWW"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivierung, Emulation, Ãœberwachung"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzverwaltung"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Eine grafische Oberfläche mit anwenderfreundlichen Anwendungen und Werkzeugen"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienten für verschiedene Protokolle, u.a. SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-Gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Sound- und Video-Abspieler/Editoren"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andere grafische Arbeitsoberflächen"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoren, Shells, Dateiwerkzeuge, Konsolen"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Finanzverwaltungsprogramme, etwa Gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persönliches Informationsmanagement"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia / CD-Brenner"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wissenschaftlicher Arbeitsplatzrechner"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
deleted file mode 100644
index 1de4183da..000000000
--- a/perl-install/share/po/el.po
+++ /dev/null
@@ -1,13124 +0,0 @@
-# Greek Translation of DrakX.
-# Copyright (c) 1999 MandrakeSoft
-# FIRST AUTHOR Theodore J. Soldatos <theodore@eexi.gr>, 1999-2000.
-# Thanos Kyritsis <djart@hellug.gr>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-23 23:59+0300\n"
-"Last-Translator: Thanos Kyritsis <djart@hellug.gr>\n"
-"Language-Team: Greek <nls@tux.hellug.gr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-7\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Ñýèìéóç üëùí ôùí êåöáëþí áíåîÜñôçôá"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "×ñÞóç åðÝêôáóçò Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ñýèìéóç ìüíï ôçò êÜñôáò \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Ñýèìéóç ðïëëþí êåöáëþí"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ôï óýóôçìÜ óáò õðïóôçñßæåé ñýèìéóç ðïëëáðëþí êåöáëþí.\n"
-"Ôß èÝëåôå íá êÜíåôå;"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "ÊÜñôá ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "ÅðéëÝîôå êÜñôá ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "ÅðéëÝîôå X server (ïäçãüò êÜñôáò ãñáöéêþí)"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "åîõðçñåôçôÞò X Window"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "ÅðéëÝîôå X server (ïäçãüò êÜñôáò ãñáöéêþí)"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "åîõðçñåôçôÞò X Window"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ôß ôýðïõ XFree èÝëåôå íá Ý÷åôå;"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ç êÜñôá ãñáöéêþí óáò õðïóôçñßæåé åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí ìüíï \n"
-"ìå ôá XFree %s. Ç êÜñôá óáò õðïóôçñßæåôáé áðü ôá XFree %s ôá ïðïßá ìðïñåß íá "
-"äßíïõí \n"
-"êáëýôåñç õðïóôÞñéîç ãéá äéóäéÜóôáôá ãñáöéêÜ."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Ç êÜñôá ãñáöéêþí óáò õðïóôçñßæåé åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí óôá XFree "
-"%s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ìå åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ç êÜñôá ãñáöéêþí óáò õðïóôçñßæåé åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí óôá XFree "
-"%s,\n"
-"ÐÑÏÓÏ×Ç: ÐÅÉÑÁÌÁÔÉÊÇ ÕÐÏÓÔÇÑÉÎÇ - ÌÐÏÑÅÉ ÍÁ ÐÁÃÙÓÅÉ ÔÏÍ ÕÐÏËÏÃÉÓÔÇ ÓÁÓ!"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ìå ÐÅÉÑÁÌÁÔÉÊÇ åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ç êÜñôá ãñáöéêþí óáò õðïóôçñßæåé åðéôÜ÷õíóç ôñéóäéÜóôáôùí ãñáöéêþí ìüíï \n"
-"ìå ôá XFree %s. ÐÑÏÓÏ×Ç: ÐÅÉÑÁÌÁÔÉÊÇ ÕÐÏÓÔÇÑÉÎÇ - ÌÐÏÑÅÉ ÍÁ ÐÁÃÙÓÅÉ ÔÏÍ "
-"ÕÐÏËÏÃÉÓÔÇ ÓÁÓ!\n"
-"Ç êÜñôá óáò õðïóôçñßæåôáé áðü ôá XFree %s ôá ïðïßá ìðïñåß íá äßíïõí êáëýôåñç "
-"õðïóôÞñéîç\n"
-"ãéá äéóäéÜóôáôá ãñáöéêÜ."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ïäçãüò ðñïâïëÞò åãêáôÜóôáóçò)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Ñõèìßóåéò XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "ÌÝãåèïò ìíÞìçò êÜñôáò ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Ñõèìßóåéò X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "ÅðéëÝîôå ïèüíç"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ïèüíç"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Ïé äýï êñßóéìåò ðáñÜìåôñïé åßíáé ç óõ÷íüôçôá êáôáêüñõöçò áíáíÝùóçò, çïðïßá "
-"åßíáé\n"
-"óõ÷íüôçôá ìå ôçí ïðïßá áíáíåþíåôáé ïëüêëçñç ç ïèüíç, êáèþò êáé ç óõ÷íüôçôá\n"
-"ïñéæüíôéáò áíáíÝùóçò, ç ïðïßá åßíáé ç óõ÷íüôçôá ìå ôçí ïðïßá áíáíåþíïíôáé\n"
-"ïé ïñéæüíôéåò ãñáììÝò.\n"
-"\n"
-"Åßíáé ÐÏËÕ ÓÇÌÁÍÔÉÊÏ íá ìÞí åðéëÝîåôå ôýðï ïèüíçò ôïõ ïðïßïõ ïé óõ÷íüôçôåò\n"
-"áíáíÝùóçò åßíáé åêôüò ôùí ïñßùí ôçò ïèüíçò óáò: õðÜñ÷åé êßíäõíïò "
-"êáôáóôñïöÞò\n"
-"ôçò ïèüíçò óáò. Áí äåí åßóôå óßãïõñïé, êÜíôå ìéá óõíôçñçôéêÞ åðéëïãÞ."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Óõ÷íüôçôá ïñéæüíôéáò áíáíÝùóçò"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Óõ÷íüôçôá êáôáêüñõöçò áíáíÝùóçò"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ç ïèüíç äåí Ý÷åé ñõèìéóôåß áêüìç"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ç êÜñôá ãñáöéêþí äåí Ý÷åé ñõèìéóôåß áêüìç"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Äåí Ý÷ïõí åðéëåãåß áíáëýóåéò áêüìç"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå ôéò ñõèìßóåéò;"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Ðñïóï÷Þ: Ç äïêéìÞ åßíáé åðéêßíäõíç óå áõôÞ ôçí êÜñôá ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "ÄïêéìÞ ñõèìßóåùí"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"äïêéìÜóôå íá áëëÜîåôå êÜðïéåò ðáñáìÝôñïõò"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "ÐñïêëÞèçêå óöÜëìá:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "¸îïäïò óå %d äåõôåñüëåðôá"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Åßíáé áõôÞ ç óùóôÞ ñýèìéóç;"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "ÐñïêëÞèçêå óöÜëìá, äïêéìÜóôå íá áëëÜîåôå êÜðïéåò ðáñáìÝôñïõò"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "ÁíÜëõóç"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "ÅðéëÝîôå áíÜëõóç êáé âÜèïò ÷ñþìáôïò"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "ÊÜñôá ãñáöéêþí: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "¶ëëá"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ïê"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "ÊáôÜóôáóç ðñï÷ùñçìÝíùí"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "ÅìöÜíéóç üëùí"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Áíáëýóåéò"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Äéáñýèìéóç ðëçêôñïëïãßïõ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Ôýðïò ðïíôéêéïý: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "ÓõóêåõÞ ðïíôéêéïý: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ïèüíç: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Óõ÷íüôçôá ïñéæüíôéáò áíáíÝùóçò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Óõ÷íüôçôá êáôáêüñõöçò áíáíÝùóçò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "ÊÜñôá ãñáöéêþí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "ÊÜñôá ãñáöéêþí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ÌíÞìç êÜñôáò ãñáöéêþí: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "ÂÜèïò ÷ñþìáôïò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "ÁíÜëõóç: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Ïäçãüò XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ðñïåôïéìáóßá ñõèìßóåùí ãñáöéêïý ðåñéâÜëëïíôïò (X-Window)"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ôé èÝëåôå íá êÜíåôå;"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "ÁëëáãÞ ïèüíçò"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "ÁëëáãÞ êÜñôáò ãñáöéêþí"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "ÁëëáãÞ ñõèìßóåùí X server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "ÁëëáãÞ áíÜëõóçò"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "ÐñïâïëÞ ðëçñïöïñéþí"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "ÅðáíÜëçøç äïêéìÞò"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "¸îïäïò"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"ÄéáôÞñçóç õðáñ÷üíôùí ñõèìßóåùí;\n"
-"Ïé ôñÝ÷ïõóåò ñõèìßóåéò åßíáé:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Ãñáöéêü ðåñéâÜëëïí (X) óôçí åêêßíçóç"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ìðïñþ íá ñõèìßóù ôï óýóôçìÜ óáò Ýôóé þóôå íá îåêéíÜåé áõôüìáôá óå\n"
-"ãñáöéêü ðåñéâÜëëïí (X-Windows).\n"
-"Åðéèõìåßôå áõôüìáôç åêêßíçóç ãñáöéêïý ðåñéâÜëëïíôïò;"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ðáñáêáëþ åðáíáóõíäåèåßôå ùò %s ãéá åíåñãïðïßçóç ôùí áëëáãþí"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Ðáñáêáëþ áðïóõíäåèåßôå êáé ìåôÜ ðáôÞóôå Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ÷ñþìáôá (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ÷éëéÜäåò ÷ñþìáôá (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ÷éëéÜäåò ÷ñþìáôá (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 åêáôïììýñéá ÷ñþìáôá (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 äéóåêáôïììýñéá ÷ñþìáôá (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB Þ ðåñéóóüôåñá"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 óôá 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 óôá 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 óôá 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 óôá 87 Hz interlaced, 800x600 óôá 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 óôá 60 Hz, 640x480 óôá 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 óôá 60 Hz, 800x600 óôá 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 óôá 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1280x1024 óôá 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1280x1024 óôá 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1280x1024 óôá 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ïèüíç ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1600x1200 óôá 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ïèüíç ðïõ ìðïñåß íá áðåéêïíßóåé áíÜëõóç 1600x1200 óôá 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Ðñþôïò ôïìÝáò ôçò êáôÜôìçóçò åêêßíçóçò"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ðñþôïò ôïìÝáò ôïõ äßóêïõ (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "ÅãêáôÜóôáóç SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Ðïý èÝëåôå íá åãêáôáóôÞóåôå ôï ðñüãñáììá åêêßíçóçò;"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "ÅãêáôÜóôáóç LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO ìå ìåíïý êåéìÝíïõ"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO ìå ãñáöéêü ìåíïý"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Åêêßíçóç áðü ôï DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "ÂáóéêÝò åðéëïãÝò ðñïãñÜììáôïò åêêßíçóçò"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader ãéá ÷ñÞóç"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "ÅãêáôÜóôáóç ðñïãñÜììáôïò åêêßíçóçò"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "ÓõóêåõÞ åêêßíçóçò"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (äåí ëåéôïõñãåß ìå ðáëáéüôåñá BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "ÓõìðáãÞò"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "óõìðáãÞò"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "ÁíÜëõóç ïèüíçò"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "ÊáèõóôÝñçóç ðñéí ôçí åêêéíçóç"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Óõíèçìáôéêü"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Óõíèçìáôéêü (îáíÜ)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Áðáãüñåõóç åðéëïãþí ãñáììÞò åíôïëÞò"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "áðáãüñåõóç"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Êáèáñéóìüò /tmp óå êÜèå åêêßíçóç"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "ÁêñéâÞò ðïóüôçôáò ìíÞìçò áí ÷ñåéÜæåôáé (Ý÷ù åíôïðßóåé %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Åíåñãïðïßçóç ðïëëáðëþí profiles"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "ÅéóÜãåôå ìÝãåèïò ìíÞìçò óå Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Ç åðéëïãÞ ``Áðáãüñåõóç åðéëïãþí ãñáììÞò åíôïëÞò'' åßíáé Ü÷ñçóôç ÷ùñßò "
-"óõíèçìáôéêü"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Ðáñáêáëþ ðñïóðáèÞóôå îáíÜ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ôá óõíèçìáôéêÜ åßíáé áíüìïéá"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "ÌÞíõìá Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "¶íïéãìá ÊáèõóôÝñçóçò Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "ÔÝëïò ×ñüíïõ Åêêßíçóçò ÐõñÞíá"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Åíåñãïðïßçóç åêêßíçóçò áðü CD;"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Åíåñãïðïßçóç OF åêêßíçóçò;"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Åî' ïñéóìïý ëåéôïõñãéêü óýóôçìá;"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ÕðÜñ÷ïõí ïé áêüëïõèåò åðéëïãÝò.\n"
-"Ìðïñåßôå íá ðñïóèÝóåôå êé Üëëåò Þ íá áëëÜîåôå ôéò õðÜñ÷ïõóåò."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "ÐñïóèÞêç"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Ïëïêëçñþèçêå"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ôñïðïðïßçóç"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ôß ôýðïõ åðéëïãÞ èÝëåôå íá ðñïóèÝóåôå"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "¶ëëï ëåéôïõñãéêü (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "¶ëëï ëåéôïõñãéêü (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "¶ëëï ëåéôïõñãéêü (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Ðßíáêáò"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "ÁíáóöáëÝò"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "ÅôéêÝôôá"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "ÅðéëïãÞ åî' ïñéóìïý"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-ìÝãåèïò"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "×ùñßòVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Áöáßñåóç åðéëïãÞò"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Äåí åðéôñÝðåôáé Üäåéá åôéêÝôôá"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "ÐñÝðåé íá Ý÷åôå ìéá êáôÜôìçóç swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "ÁõôÞ ç åôéêåôôá ÷ñçóéìïðïéåßôáé Þäç"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "ÂñÞêá %s %s ðñïóáñìïãåßò"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "¸÷åôå áëëïí;"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¸÷åôå êÜðïéïí ðñïóáñìïãÝá %s;"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "¼÷é"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Íáé"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "ÐñïâïëÞ ðëçñïöïñéþí õëéêïý"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ÅãêáôÜóôáóç ïäçãïý ãéá %s êÜñôá %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Ðïéüí %s ïäçãü íá äïêéìÜóù;"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Óå ìåñéêÝò ðåñéðôþóåéò, ï %s ïäçãüò ÷ñåéÜæåôáé åðéðëÝïí ðáñáìÝôñïõò ãéá\n"
-"íá ëåéôïõñãÞóåé óùóôÜ, ðáñ' üëï ðïõ óõíÞèùò ëåéôïõñãåß êáé ÷ùñßò áõôÝò.\n"
-"Èá èÝëáôå íá äþóåôå åðéðëÝïí åðéëïãÝò Þ íá áöÞóåôå ôïí ïäçãü íá åîåôÜóåé\n"
-"ôï õëéêü óáò ãéá ôéò ðáñáìÝôñïõò ðïõ ÷ñåéÜæåôáé; Ç åîÝôáóç áõôÞ ßóùò\n"
-"ðñïêáëÝóåé êüëëçìá ôïõ óõóôÞìáôïò, áëëÜ äåí èá ðñïêáëÝóåé âëÜâç."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Áõôüìáôç åîÝôáóç"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Ðñïóäéïñéóìüò ðáñáìÝôñùí"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ìðïñåßôå ôþñá íá äþóåôå ôéò ðáñáìÝôñïõò ãéá ôïí ïäçãü %s.\n"
-"Ïé ðáñÜìåôñïé Ý÷ïõí ôçí ìïñöÞ ``üíïìá=ôéìÞ üíïìá2=ôéìÞ2 ...''.\n"
-"Ãéá ðáñÜäåéãìá, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "ÐáñÜìåôñïé ïäçãïý"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ç öïñôùóç ôïõ ïäçãïý %s áðåôõ÷å.\n"
-"ÈÝëåôå íá äïêéìÜóåôå îáíÜ ìå äéáöïñåôéêÝò ðáñáìÝôñïõò;"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ôï %s Ý÷åé Þäç ðñïóôåèåß)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ôï óõíèçìáôéêü åßíáé ðïëý áðëü"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Ðáñáêáëþ åéóÜãåôå êùäéêü üíïìá"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Ôï êùäéêü üíïìá ìðïñåß íá ðåñéÝ÷åé ìüíï ðåæÜ ãñÜììáôá, áñéèìïýò, `-' êáé `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Áõôü ôï êùäéêü üíïìá õðÜñ÷åé Þäç"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "ÐñïóèÞêç ÷ñÞóôç"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ÅéóÜãåôå ÷ñÞóôç\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Áðïäï÷Þ ÷ñÞóôç"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Ðñáãìáôéêü üíïìá"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Êùäéêü üíïìá"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Öëïéüò (shell)"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Åéêïíßäéï"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Áõôüìáôç óýíäåóç (Autologin)"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ìðïñþ íá ñõèìßóù ôï óýóôçìÜ óáò Ýôóé þóôå íá óõíäÝåôáé áõôüìáôá êáôÜ\n"
-"ôçí åêêßíçóç óå Ýíáí óõãêåêñéìÝíï ÷ñÞóôç.\n"
-"ÅÜí äåí èÝëåôå íá óõìâáßíåé áõôü, ðáôÞóôå óôï êïõìðß áêýñùóçò."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "ÅðéëÝîôå ôïí åî' ïñéóìïý ÷ñÞóôç:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "ÅðéëÝîôå ôïí äéá÷åéñéóôÞ ðáñáèýñùí ðïõ èÝëåôå íá ÷ñçóéìïðïéÞóåôå"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Ðáñáêáëþ åðéëÝîôå ìéá ãëþóóá."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Ìðïñåßôå íá åðéëÝîåôå êáé Üëëåò ãëþóóåò ðïõ èá åßíáé äéáèÝóéìåò ìåôÜ ôï "
-"ðÝñáò ôçò åãêáôÜóôáóçò"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "¼ëá"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "ÐñïóèÞêç ÷ñÞóôç"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "ÐñïóáñìïóìÝíï"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Åêêßíçóç CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Áõôü ôï ðáêÝôï ðñÝðåé íá áíáâáèìéóôåß\n"
-"Åßóôå óßãïõñïò üôé èÝëåôå íá ôï áðïåðéëÝîåôå;"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Áêýñùóç"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Êáëþò Þñèáôå óôïõò Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Öôù÷ü"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ôõðéêü"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Õøçëü"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Õøçëü"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Ðáñáíïúêü"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Áõôü ôï åðßðåäï ðñÝðåé íá ÷ñçóéìïðïéçèåß ìå ðñïóï÷Þ. ÊÜíåé ôï óýóôçìÜ óáò\n"
-"ðéï åõêïëü÷ñçóôï, áëëÜ ðïëý åõáßóèçôï. Äåí ðñÝðåé íá ÷ñçóéìïðïéçèåß óå "
-"óýóôçìá\n"
-"óõíäåäåìÝíï óôï Internet Þ LAN. Äåí õðÜñ÷ïõí ëÝîåéò êëåéäéÜ."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ôþñá õðÜñ÷ïõí ëÝîåéò êëåéäéÜ, áëëÜ ç ÷ñÞóç ôïõ óõóôÞìáôïò óå äßêôõï \n"
-"äåí óõíßóôáôáé."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Áõôü åßíáé ôï óõíçèéóìÝíï åðßðåäï áóöáëåßáò ãéá Ýíá óýóôçìá ðïõ èá óõíäåèåß\n"
-"ùò ðåëÜôçò óôï Internet. ÕðÜñ÷ïõí ôþñá Ýëåã÷ïé áóöáëåßáò."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ìå áõôü ôï åðßðåäï áóöáëåßáò åßíáé äõíáôÞ ç ÷ñÞóç ôïõ óõóôÞìáôïò óôï \n"
-"Internet ùò åîõðçñåôçôÞ. Ç áóöÜëåéá åßíáé áñêåôÜ õøçëÞ þóôå íá äÝ÷åôáé\n"
-"ôáõôü÷ñïíåò óõíäÝóåéò áðü ðïëëïýò ðåëÜôåò."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"ÁóöÜëåéá åðéðÝäïõ 4, ìå ôï óýóôçìá ôåëåßùò êëåéóôü. ÁóöÜëåéá \n"
-"óôï ìÝãéóôï äõíáôü."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "ÅðéëÝîôå åðßðåäï áóöáëåßáò"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Ñýèìéóç åðéðÝäïõ áóöáëåßáò"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Ñõèìßóåéò X server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
-"\n"
-"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
-"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "äåí õðÜñ÷åé áñêåôüò ÷þñïò óôï /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ðïý èÝëåôå íá åãêáôáóôÞóåôå ôï ðñüãñáììá åêêßíçóçò;"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "äåí õðÜñ÷åé âïÞèåéá äéáèÝóéìç áêüìá.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Boot Ôýðïõ Ñýèìéóç"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Áñ÷åßï"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Áñ÷åßï/¸_îïäïò"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Ïèüíç"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Ïèüíç"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ÐáñáäïóéáêÞ Ïèüíç"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ÐáñáäïóéáêÞ Gtk+ Ïèüíç"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Åêêßíçóç ôïõ Aurora êáôÜ ôçí åêêßíçóç ôïõ óõóôÞìáôïò"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Ëåéôïõñãßá Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Ëåéôïõñãßá Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"×ñçóéìïðïéåßôå ôïí %s ùò Boot Manager.\n"
-"ÊÜíôå êëßê óôï Ñýèìéóç ãéá íá îåêéíÞóåôå ôïí ïäçãü åãêáôÜóôáóçò."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Ñýèìéóç"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "ÊáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "¶íïéãìá ôïõ X-Window êáôÜ ôçí åêêßíçóç ôïõ óõóôÞìáôïò"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "¼÷é, äåí åðéèõìþ áõôüìáôï login"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Íáé, åðéèõìþ áõôüìáôï login ìå áõôü (user, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "áäõíáìßá áíïßãìáôïò ôïõ /etc/inittab ãéá áíÜãíùóç: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ëåðôÜ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ëåðôü"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d äåõôåñüëåðôá"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Äåí ìðïñþ íá ðñïóèÝóù êáôáôìçóåéò"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Ìðïñåßôå íá åðéëÝîåôå êáé Üëëåò ãëþóóåò ðïõ èá åßíáé äéáèÝóéìåò ìåôÜ ôï "
-"ðÝñáò ôçò åãêáôÜóôáóçò"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Ãáëëéêü"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Âåëãéêü"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Ãåñìáíéêü"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Åëëçíéêü"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Íïñâçãéêü"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Óïõçäéêü"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Éôáëéêü"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "óåéñéáêü"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Ðáñáêáëþ êÜíôå ðñþôá Ýíá áíôßãñáöï áóöáëåßáò ôùí äåäïìÝíùí óáò"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "ÄéáâÜóôå ðñïóåêôéêÜ!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"ÅÜí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå ôï aboot, ðñïóÝîôå íá áöÞóåôå åëåýèåñï ÷þñï "
-"2048 ôïìåßò åßíáé áñêåôïß)\n"
-"óôçí áñ÷Þ ôïõ äßóêïõ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "ÓöÜëìá"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "ÌÜãïò"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "ÅðéëÝîôå ðñÜîç"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"¸÷åôå ìéá ìåãÜëç FAT êáôÜôìçóç\n"
-"(óõíÞèùò ÷ñçóéìïðïéïýìåíç áðü Dos Þ Windows).\n"
-"Óõíéóôþ íá áëëÜîåôå ôï ìÝãåèüò ôçò ðñþôá\n"
-"(åðéëÝîôå ôçí, ìåôÜ åðéëÝîôå \"ÁëëáãÞ ìåãÝèïõò\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Ðáñáêáëþ êÜíôå êëéê óå ìéá êáôÜôìçóç"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "ËåðôïìÝñåéåò"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "óýíäåóç áðÝôõ÷å"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "¶äåéï"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "¶ëëï"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Ôýðïé óõóôÞìáôïò áñ÷åßùí:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Äçìéïõñãßá"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Ôýðïò"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "×ñçóéìïðïéÞóôå ``%s'' óôç èÝóç ôïõ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "ÄéáãñáöÞ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "ÊÜíôå ðñþôá ``Áðïóýíäåóç''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"ÌåôÜ ôçí áëëáãÞ ôýðïõ óôçí êáôÜôìçóç %s, üëá ôá äåäïìÝíá óå áõôÞí ôçí "
-"êáôÜôìçóç èá ÷áèïýí"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "ÅðéëÝîôå ðñÜîç"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Äçìéïõñãßá íÝáò êáôÜôìçóçò"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "ÌåôáðÞäçóç óå ðñï÷ùñçìÝíï ôñüðï ëåéôïõñãßáò"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "ÌåôáðÞäçóç óå êáíïíéêü ôñüðï ëåéôïõñãßáò"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Áêýñùóç ôåëåõôáßáò ðñÜîçò"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Íá óõíå÷éóù;"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "¸îïäïò ÷ùñßò áðïèÞêåõóç"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "¸îïäïò ÷ùñßò áðïèÞêåõóç ôïõ ðßíáêá êáôáôìÞóåùí;"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå ôéò ñõèìßóåéò;"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Áõôïìáôç êáôáíïìÞ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Êáèáñéóìüò üëùí"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Åíôïðéóìüò óêëçñïý äßóêïõ"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "¼ëåò ïé ðñùôåýïõóåò êáôáôìÞóåéò åßíáé óå ÷ñÞóç"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Äåí ìðïñþ íá ðñïóèÝóù êáôáôìçóåéò"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ãéá íá ðñïóèÝóåôå êáôáôìÞóåéò, ðáñáêáëþ äéáãñÜøôå ìßá åôóé þóôåíá åßíáé "
-"äõíáôÞ ç ðñïóèÞêç åêôåôáìÝíçò êáôÜôìçóçò"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "ÁðïèÞêåõóç ðßíáêá êáôáôìÞóåùí"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Ðßíáêáò êáôáôìÞóåùí äéÜóùóçò"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Ðßíáêáò êáôáôìÞóåùí äéÜóùóçò"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Ðßíáêáò êáôáôìÞóåùí äéÜóùóçò"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Áõôüìáôç óýíäåóç áðïóðþìåíùí ìïíÜäùí áðïèÞêåõóçò"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "ÅðéëÝîôå áñ÷åßï"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Ï åöåäñéêüò ðßíáêáò êáôáôìÞóåùí Ý÷åé äéáöïñåôéêü ìÝãåèïò\n"
-"Íá óõíå÷ßóù;"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Ðñïåéäïðïßçóç"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"ÅéóÜãåôå ìéá äéóêÝôôá óôïí ïäçãü äéóêÝôôáò\n"
-"¼ëá ôá äåäïìÝíá óå áõôÞ ôç äéóêÝôôá èá ÷áèïýí"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "ÐñïóðÜèåéá äéÜóùóçò ðßíáêá êáôáôìÞóåùí"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "ÐñïâïëÞ ðëçñïöïñéþí"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Óçìåßï óýíäåóçò"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "ÅðéëïãÝò"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "ÁëëáãÞ ìåãÝèïõò"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Ìåôáêßíçóç"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Ìïñöïðïßçóç"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Óýíäåóç"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "ÐñïóèÞêç óôï RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "ÐñïóèÞêç óôï LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Áðïóýíäåóç"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Áöáßñåóç áðü ôï RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Áöáßñåóç áðü ôï LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ôñïðïðïßçóç RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "×ñÞóç ãéá loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Äçìéïõñãßá íÝáò êáôÜôìçóçò"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Áñ÷Þ óôïí ôïìÝá: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "ÌÝãåèïò óå MB"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Ôýðïò óõóôÞìáôïò áñ÷åßùí: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Óçìåßï óýíäåóçò: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Ðñïôßìçóç: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ìïñöïðïßçóç áñ÷åßïõ loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "ÁëëáãÞ ôýðïõ êáôÜôìçóçò"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Ðïéü óýôçìá áñ÷åßùí ðñïôéìÜôå;"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ÁëëáãÞ áðü ext2 óå ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Ðïý èÝëåôå íá óõíäÝóåôå ôï áñ÷åßï loopback %s;"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Ðïý èÝëåôå íá óõíäÝóåôå ôçí óõóêåõÞ %s;"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Äåí ìðïñþ íá áöáéñÝóù ôï óçìåßï óýíäåóçò êáèþò áõôÞ ç êáôÜôìçóç "
-"÷ñçóéìïðïéåßôáé\n"
-"ãéá loopback. ÁöáéñÝóôå ðñþôá ôï loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Õðïëïãéóìüò fat filesystem bounds"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "ÌåôáâïëÞ ìåãÝèïõò"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Áõôüò ï ôýðïò êáôÜôìçóçò äåí ìðïñåß í' áëëÜîåé ìÝãåèïò."
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"ÐñÝðåé íá ãßíåé áíôßãñáöï áóöáëåßáò üëùí ôùí äåäïìÝíùí óå áõôÞ ôçí êáôÜôìçóç"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ÌåôÜ ôçí áëëáãÞ ìåãÝèïõò óôçí êáôÜôìçóç %s, üëá ôá äåäïìÝíá óå áõôÞí ôçí "
-"êáôÜôìçóç èá ÷áèïýí"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "ÅðéëÝîôå ôï íÝï ìÝãåèïò"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "ÌÝãåèïò óå MB"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Óå ðïéüí äßóêï èÝëåôå íá ìåôáêéíçèåßôå;"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "ÔïìÝáò"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Óå ðïéüí ôïìÝá èÝëåôå íá ìåôáêéíçèåßôå;"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ìåôáêßíçóç óå åîÝëéîç"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ìåôáêßíçóç êáôÜôìçóçò óå åîÝëéîç..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "ÅðéëÝîôå Ýíá õðÜñ÷ïí RAID óôï ïðïßï èá ãßíåé ç ðñïóèÞêç"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "íÝï"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "ÅðéëÝîôå Ýíá õðÜñ÷ïí LVM óôï ïðïßï èá ãßíåé ç ðñïóèÞêç"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "üíïìá LVM;"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "ÁõôÞ ç êáôÜôìçóç äåí ìðïñåß íá ÷ñçóéìïðïéçèåß ãéá loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "¼íïìá áñ÷åßïõ loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Ðñáãìáôéêü üíïìá"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Ôï áñ÷åßï ÷ñçóéìðïðïéåßôáé Þäç, åðéëÝîôå Ýíá Üëëï"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Ôï áñ÷åßï õðÜñ÷åé Þäç. Íá ôï ÷ñçóéìïðïéÞóù;"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "ÐáñÜìåôñïé ïäçãïý"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "óõóêåõÞ"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "åðßðåäï"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ìÝãåèïò chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Ðñïóï÷Þ: ÁõôÞ ç äéáäéêáóßá åßíáé åðéêßíäõíç."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Ôß ôýðïõ partitioning;"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Óõããíþìç, áëëÜ äåí ìðïñþ íá äçìéïõñãÞóù ôïí êáôÜëïãï /boot óå êýëéíäñï "
-"ìåãáëýôåñï ôïõ 1024.\n"
-"Åßôå ÷ñçóéìïðïéåßôå LILO êáé äåí èá äïõëÝøåé, åßôå äåí ÷ñçóéìïðïéåßôåLILO "
-"êáé äåí ÷ñåéÜæåóôå ôï /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Ç êáôÜôìçóç ðïõ åðéëÝîáôå ùò root (/) âñßóêåôáé ìåôÜ ôïí êýëéíäñï 1024 êáé\n"
-"äåí Ý÷åôå êáôÜôìçóç /boot.\n"
-"Áí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå LILO, ðñïóèÝóôå ìßá êáôÜôìçóç /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"ÅðéëÝîáôå ìéá software RAID êáôÜôìçóç ùò root (/).\n"
-"ÊáíÝíá ðñüãñáììá åêêßíçóçò äåí ìðïñåß íá ôï ÷åéñéóôåß áõôü ÷ùñßò ìéá "
-"êáôÜôìçóç /boot.\n"
-"Öñïíôßóôå ëïéðüí íá ðñïóèÝóåôå ìéá êáôÜôìçóç /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ï ðßíáêáò êáôáôìÞóåùí ôïõ äßóêïõ %s èá áðïèçêåõôåß óôïí äßóêï!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Áðáéôåßôáé åðáíåêêßíçóç ãéá íá åöáñìïóôïýí ïé áëëáãÝò"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"ÌåôÜ ôçí ìïñöïðïßçóç ôçò êáôÜôìçóçò %s, üëá ôá äåäïìÝíá óå áõôÞí ôçí "
-"êáôÜôìçóç èá ÷áèïýí"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ìïñöïðïßçóç"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ìïñöïðïßçóç áñ÷åßïõ loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ìïñöïðïßçóç êáôÜôìçóçò %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "áðïôõ÷ßá mkraid"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Äåí õðÜñ÷åé áñêåôüò åëåýèåñïò ÷þñïò ãéá äçìéïõñãßá íÝùí êáôáôìÞóåùí"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Äåí õðÜñ÷åé áñêåôüò åëåýèåñïò ÷þñïò ãéá äçìéïõñãßá íÝùí êáôáôìÞóåùí"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "ÁíÜëõóç: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "ÓõóêåõÞ: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ðéèáíü DOS ãñÜììá äßóêïõ: %s \n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Ôýðïò: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "¼íïìá: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Áñ÷Þ: ôïìÝáò %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "ÌÝãåèïò: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ôïìåßò"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Êýëéíäñïò %d åþò êýëéíäñïò %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "ÌïñöïðïéçìÝíïò\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Áìïñöïðïßçôïò\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "ÓõíäåäåìÝíïò\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Áñ÷åßá loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"ÊáôÜôìçóç åêêßíçóçò åî ïñéóìïý\n"
-"    (áðü MS-DOS, ü÷é áðü lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Åðßðåäï %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "ÌÝãåèïò chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Äßóêïé RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "¼íïìá áñ÷åßïõ loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Ïé ðéèáíüôçôåò åßíáé, áõôÞ ç êáôÜôìçóç íá åßíáé\n"
-"ìéá êáôÜôìçóç Ïäçãþí, èá ðñÝðåé ðéèáíüôáôá\n"
-"íá ôçí áöÞóåôå Þóõ÷ç.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ÁõôÞ åßíáé åéäéêÞ Bootstrap\n"
-"êáôÜôìçóç ãéá\n"
-"dual-booting ôï óýóôçìÜ óáò.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "ÌÝãåèïò: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ãåùìåôñßá: %s êýëéíäñïé, %s êåöáëÝò, %s ôïìåßò\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Ðëçñïöïñßåò: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Äßóêïé LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Ôýðïò ðßíáêá êáôáôìÞóåùí: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "óôï bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "ÅðéëïãÝò: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Ôýðïò óõóôÞìáôïò áñ÷åßùí: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Áõôü ôï óõíèçìáôéêü åßíáé ðïëý áðëü (ðñÝðåé íá åßíáé ôïõëÜ÷éóôïí %d "
-"÷áñáêôÞñåò ìáêñý)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Ôá óõíèçìáôéêÜ åßíáé áíüìïéá"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "ÁëëáãÞ ôýðïõ êáôÜôìçóçò"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Ðáñáêáëþ êÜíôå êëéê óå ìéá êáôÜôìçóç"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "ÅîõðçñåôçôÞò DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ìïñöïðïßçóç ôïõ %s áðÝôõ÷å"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "äåí îÝñù ðþò íá ìïñöïðïéÞóù ôï %s óå ôýðï %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "ôï fsck áðÝôõ÷å ìå êùäéêü åîüäïõ %d Þ óÞìá %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "óöÜëìá êáôÜ ôçí áðïóýíäåóç ôïõ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "áðëü"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "åîõðçñåôçôÞò"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"Äåí ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ôï JFS ãéá êáôáôìÞóåéò ìéêñüôåñåò áðü 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Äåí ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ôï ReiserFS ãéá êáôáôìÞóåéò ìéêñüôåñåò áðü "
-"32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ôï óçìåßï óýíäåóçò ðñÝðåé íá îåêéíÜåé ìå /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "ÕðÜñ÷åé Þäç êáôÜôìçóç ìå óçìåßï óýíäåóçò %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Äåí ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ìéá êáôÜôìçóç LVM ãéá ðñïóÜñôçóç %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-"Áõôüò ï êáôÜëïãïò ðñÝðåé íá ðáñáìåßíåé óôï ñéæéêü óýóôçìá áñ÷åßùí (root)"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"×ñåéÜæåóôå Ýíá ðñáãìáôéêü óýóôçìá áñ÷åßùí (ext2, reiserfs) ãéá áõôü ôï "
-"óçìåßï óýíäåóçò\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Äåí ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ìéá êáôÜôìçóç LVM ãéá ðñïóÜñôçóç %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-"Äåí õðÜñ÷åé áñêåôüò åëåýèåñïò ÷þñïò ãéá áõôüìáôç äçìéïõñãßá íÝùí êáôáôìÞóåùí"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ÓöÜëìá êáôÜ ôï Üíïéãìá ôïõ %s ãéá åããñáöÞ: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"ÐñïêëÞèçêå óöÜëìá - äåí âñÝèçêáí óõóêåõÝò óôéò ïðïßåò íá åßíáé äõíáôÞç "
-"äçìéïõñãßá íÝùí óõóôçìÜôùí áñ÷åßùí. Ðáñáêáëþ åëåãîôå ôï õëéêü óáò ãéáôçí "
-"áéôßá áõôïý ôïõ ðñïâëÞìáôïò"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Äåí õðÜñ÷åé êáìßá êáôÜôìçóç!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"ÐáñáðÜíù âëÝðåôå Ýíáí êáôÜëïãï ìå ôéò êáôáôìÞóåéò Linux ðïõ åíôïðßóôçêáí "
-"óôïí \n"
-"äßóêï óáò. Ìðïñåßôå íá êñáôÞóåôå ôéò áõôüìáôåò åðéëïãÝò, åßíáé êáëÝò ãéá \n"
-"óõíçèéóìÝíç ÷ñÞóç. ÅÜí áëëÜîåôå áõôÝò ôéò åðéëïãÝò, ðñÝðåé íá Ý÷åôå "
-"ôïõëÜ÷éóôïí\n"
-"ìéá âáóéêÞ êáôÜôìçóç (root, \"/\"). Ìçí åðéëÝîåôå ìéá ðïëý ìéêñÞ êáôÜôìçóç "
-"ãéáôß\n"
-"äåí èá Ý÷åôå ÷þñï ãéá åãêáôÜóôáóç ëïãéóìéêïý. ÅÜí èÝëåôå íá áðïèçêåýåôå ôá "
-"äåäïìÝíá\n"
-"óáò óå îå÷ùñéóôÞ êáôÜôìçóç, ðñÝðåé íá åðéëÝîåôå ìéá êáôÜôìçóç ãéá \"/home"
-"\" (äõíáôüí\n"
-"ìüíï áí Ý÷åôå ðáñáðÜíù áðü ìßá Linux êáôÜôìçóç äéáèÝóéìç).\n"
-"\n"
-"\n"
-"ÐëçñïöïñéáêÜ, êÜèå êáôÜôìçóç áíáöÝñåôáé ùò: \"¼íïìá\", \"×ùñçôéêüôçôá\".\n"
-"\n"
-"\n"
-"Ôï üíïìá óçìáßíåé ôá åîÞò: Ôýðïò äßóêïõ, áñéèìüò äßóêïõ, áñéèìüò "
-"êáôÜôìçóçò \n"
-"ãéá ðáñÜäåéãìá, \"hda1\").\n"
-"\n"
-"\n"
-"Ï ôýðïò åßíáé \"hd\" åÜí ðñüêåéôáé ãéá äßóêï IDE êáé \"sd\" ãéá SCSI äßóêï.\n"
-"\n"
-"\n"
-"Ï áñéèìüò äßóêïõ åßíáé ðÜíôá Ýíá ãñÜììá ìåôÜ ôï \"hd\" Þ \"sd\". Ãéá ôïõò "
-"IDE \n"
-"äßóêïõò: \n"
-"\n"
-"   * \"a\" åßíáé ï master äßóêïò óôïí ðñþôï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"b\" åßíáé ï slave äßóêïò óôïí ðñþôï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"c\" åßíáé ï master äßóêïò óôïí äåýôåñï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"d\" åßíáé ï slave äßóêïò óôïí äåýôåñï åëåãêôÞ IDE.\n"
-"\n"
-"\n"
-"Ãéá äßóêïõò SCSI, \"a\" åßíáé ï ðñþôïò äßóêïò, \"b\" åßíáé ï äåýôåñïò äßóêïò "
-"êëð..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ìðïñåßôå ôþñá íá åðéëÝîåôå ðïéÝò õðçñåóßåò èÝëåôå íá îåêéíïýí êáôÜ ôçí \n"
-"åêêßíçóç.\n"
-"\n"
-"\n"
-"ÅÜí ìåôáêéíÞóåôå ôïí äñïìÝá ôïõ ðïíôéêéïý ðÜíù óå ìßá áðü áõôÝò, \n"
-"èá åìöáíéóôåß Ýíá ìðáëïíÜêé âïçèåßáò ðïõ èá åîçãåß ôïí ñüëï ôçò.\n"
-"\n"
-"\n"
-"ÐñïóÝîôå áõôü ôï âÞìá åÜí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå óôï óýóôçìá óáí \n"
-"åîõðçñåôçôÞ. Äåí èá èÝëáôå íá îåêéíÞóåôå õðçñåóßåò ðïõ äåí ÷ñåéÜæåóôå, \n"
-"äéüôé ïñéóìÝíåò õðçñåóßåò åìðåñéÝ÷ïõí êéíäýíïõò áóöáëåßáò åÜí õðÜñ÷ïõí \n"
-"óå åîõðçñåôçôÞ.\n"
-"ÃåíéêÜ, åðéëÝîôå ìüíï ôéò õðçñåóßåò ðïõ ÷ñåéÜæåóôå ðñáãìáôéêÜ."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Óå áõôü ôï óçìåßï, ðñÝðåé íá áðïöáóßóåôå ðïý èá åãêáôáóôÞóåôå ôï GNU/Linux\n"
-"óôïí óêëçñü óáò äßóêï. ÅÜí åßíáé Üäåéïò Þ åÜí Ýíá Üëëï ëåéôïõñãéêü "
-"÷ñçóéìïðïéåß\n"
-"üëïí ôïí ÷þñï, èá ÷ñåéáóôåß íá ôïí êáôáôìÞóåôå, äçëáäÞ íá êÜíåôå Ýíáí ëïãéêü "
-"äéá÷ùñéóìü\n"
-"ôïõ äßóêïõ óå äéáìåñßóìáôá, þóôå íá äçìéïõñãÞóåôå ÷þñï ãéá ôçí åãêáôÜóôáóç "
-"ôïõ Mandrake Linux.\n"
-"\n"
-"\n"
-"ÅðåéäÞ ç êáôÜôìçóç åßíáé óõíÞèùò ìéá ìç áíôéóôñåðôÞ åñãáóßá, ìðïñåß íá åßíáé "
-"äýóêïëç êáé \n"
-"áã÷ùôéêÞ ãéá Ýíáí áñ÷Üñéï ÷ñÞóôç.\n"
-"Áõôü ôï ðñüãñáììá áðëïðïéåß ôçí äéáäéêáóßá. Ðñéí áñ÷ßóåôå, ðáñáêáëþ "
-"óõìâïõëåõèåßôå ôï \n"
-"åã÷åéñßäéï ÷ñÞóçò êáé ìçí âéáóôåßôå.\n"
-"\n"
-"\n"
-"Èá ÷ñåéáóôåßôå ôïõëÜ÷éóôïí äýï êáôáôìÞóåéò. Ìßá ãéá ôï ëåéôïõñãéêü óýóôçìá "
-"êáé Üëëç ìßá ãéá \n"
-"ôçí åéêïíéêÞ ìíÞìç (swap).\n"
-"\n"
-"\n"
-"ÅÜí õðÜñ÷ïõí Þäç êáôáôìÞóåéò áðü ðñïçãïýìåíç åãêáôÜóôáóç Þ áðü Üëëï "
-"åñãáëåßï, èá ÷ñåéáóôåß\n"
-"áðëþò íá åðéëÝîåôå óå ðïéÝò áðü áõôÝò èá åãêáôáóôÞóåôå ôï Linux óáò.\n"
-"\n"
-"\n"
-"ÅÜí äåí õðÜñ÷ïõí êáôáôìÞóåéò, ðñÝðåé íá ôéò äçìéïõñãÞóåôå ìå ôï ðáñáðÜíù "
-"åñãáëÝéï. ÁíÜëïãá ìå \n"
-"ôçí êáôÜóôáóç ôïõ äßóêïõ óáò, õðÜñ÷ïõí äéÜöïñåò ëýóåéò:\n"
-"\n"
-"* ×ñÞóç õðÜñ÷ïíôùí êáôáôìÞóåùí: ÂñÝèçêáí ìßá Þ ðåñéóóüôåñåò êáôáôìÞóåéò "
-"Linux óôï óýóôçìÜ óáò.\n"
-"  ÅÜí èÝëåôå íá ôéò êñáôÞóåôå, åðéëÝîôå áõôÞí ôçí åðéëïãÞ.\n"
-"\n"
-"\n"
-"* ÄéáãñáöÞ ïëüêëçñïõ ôïõ äßóêïõ: ÅÜí èÝëåôå íá äéáãñÜøåôå üëá ôá äåäïìÝíá "
-"êáé üëåò ôéò õðÜñ÷ïõóåò\n"
-"  êáôáôìÞóåéò êáé íá ôá áíéêáôáóôÞóåôå ìå ôï íÝï óáò Mandrake Linux óýóôçìá, "
-"åðéëÝîôå áõôÞí ôçí \n"
-"  åðéëïãÞ. ÐÑÏÓÏ×Ç: Äåí õðÜñ÷åé ôñüðïò íá áíôéóôñÝøåôå ôçí äéáäéêáóßá\n"
-"  áí áëëÜîåôå ãíþìç áñãüôåñá! ¼ëá ôá äåäïìÝíá èá êáôáóôñáöïýí!\n"
-"\n"
-"\n"
-"* ×ñÞóç åëåýèåñïõ ÷þñïõ óôçí êáôÜôìçóç ôùí Windows: ÅÜí Ý÷åôå åãêáôåóôçìÝíá "
-"ôá Microsoft Windows\n"
-"  êáé êáôáëáìâÜíïõí üëï ôïí ÷þñï ôïõ äßóêïõ, ðñÝðåé íá äçìéïõññãÞóåôå "
-"åëÝõèåñï ÷þñï ãéá ôï Linux.\n"
-"  Ãéá íá ãßíåé áõôü, ìðïñåßôå åßôå íá äéáãñÜøåôå ôçí êáôÜôìçóç ôùí Windows "
-"êáé üëá ôá äåäïìÝíá ôïõò\n"
-"  (äåò \"ÄéáãñáöÞ ïëüêëçñïõ ôïõ äßóêïõ\" Þ \"Åéäéêüò\") Þ íá óõññéêíþóåôå "
-"ôçí êáôÜôìçóç ôùí Windows.\n"
-"  Ç óõññßêíùóç ìðïñåß íá ãßíåé ÷ùñßò áðþëåéá äåäïìÝíùí. ÁõôÞ ç ëýóç "
-"óõíßóôáôáé åÜí èÝëåôå íá ÷ñçóéìïðïéåßôå\n"
-"  Microsoft Windows êáé Mandrake Linux óôïí ßäéï õðïëïãéóôÞ.\n"
-"\n"
-"\n"
-"  Ðñéí áðïöáóßóåôå íá óõññéêíþóåôå ôïí äßóêï, ðñÝðåé íá êáôáëÜâåôå üôé ìåôÜ "
-"áðü áõôÞí ôçí äéáäéêáóßá\n"
-"  èá Ý÷åôå ëéãüôåñï ÷þñï äéáèÝóéìï áðü ôá Windows ãéá áðïèÞêåõóç äåäïìÝíùí Þ "
-"åãêáôÜóôáóç åöáñìïãþí.\n"
-"\n"
-"\n"
-"* Åéäéêüò: ÅÜí èÝëåôå íá êáôáôìÞóåôå åóåßò ôïí äßóêï óáò, ÷ùñßò áõôüìáôåò "
-"áðïöÜóåéò. Åßíáé ìéá \n"
-"  åðéëïãÞ ìå ðïëëÝò äõíáôüôçôåò áëëÜ åðéêßíäõíç, ìéá êáé ìðïñåßôå íá ÷Üóåôå "
-"üëá ôá äåäïìÝíá óáò\n"
-"  åÜí êÜíåôå êÜðïéï ëÜèïò. Âåâáéùèåßôå üôé îÝñåôå ôé êÜíåôå ðñùôïý "
-"ðñï÷ùñÞóåôå."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Ïé íÝåò êáôáôìÞóåéò ðñÝðåé íá öïñìáñéóôïýí (äçëáäÞ íá äçìéïõñãçèåß Ýíá "
-"óýóôçìá\n"
-"áñ÷åßùí) ðñùôïý ÷ñçóéìïðïéçèïýí.\n"
-"\n"
-"\n"
-"Ìðïñåßôå åðßóçò íá öïñìÜñåôå êÜðïéåò ðñïûðÜñ÷ïõóåò êáôáôìÞóåéò ãéá íá "
-"äéáãñÜøåôå \n"
-"ôá äåäïìÝíá ôïõò. ÅÜí èÝëåôå êÜôé ôÝôïéï, ðáñáêáëþ åðéëÝîôå ôéò êáôáôìÞóåéò "
-"ðïõ \n"
-"èÝëåôå íá öïñìÜñåôå.\n"
-"\n"
-"\n"
-"Óçìåéþóôå üôé äåí åßíáé áðáñáßôçôï íá öïñìÜñåôå üëåò ôéò ðñïûðÜñ÷ïõóåò "
-"êáôáôìÞóåéò.\n"
-"ÐñÝðåé íá öïñìÜñåôå ôéò êáôáôìÞóåéò ðïõ ðåñéÝ÷ïõí ôï ëåéôïõñãéêü óýóôçìá "
-"(üðùò ïé \n"
-"\"/\", \"/usr\" êáé \"/var\"), áëëÜ äåí ÷ñåéÜæåôáé íá öïñìÜñåôå êáôáôìÞóåéò "
-"ðïõ ðåñéÝ÷ïõí \n"
-"äåäïìÝíá ðïõ èÝëåôå íá êñáôÞóåôå (óõíÞèùò ç \"/home\").\n"
-"\n"
-"\n"
-"Ðáñáêáëþ íá åßóôå ðñïóåêôéêïß êáèþò ìåôÜ áðü áõôÞí ôçí äéáäéêáóßá üëá ôá "
-"äåäïìÝíá \n"
-"óôéò êáôáôìÞóåéò áõôÝò èá ÷áèïýí áìåôÜêëçôá.\n"
-"\n"
-"\n"
-"ÐáôÞóôå \"OK\" üôáí åßóôå Ýôïéìïé íá îåêéíÞóåôå ôçí äéáäéêáóßá.\n"
-"\n"
-"\n"
-"ÐáôÞóôå \"Áêýñùóç\" åÜí èÝëåôå íá áëëÜîåôå ôéò åðéëïãÝò óáò êáé íá "
-"÷ñçóéìïðïéÞóåôå \n"
-"Üëëåò êáôáôìÞóåéò ãéá ôçí åãêáôÜóôáóç ôïõ Mandrake Linux."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ôï íÝï óáò ëåéôïõñãéêü óýóôçìá Mandrake Linux åãêáèßóôáôáé.\n"
-"ÁõôÞ ç äéáäéêáóßá èá ðÜñåé êÜðïéá þñá, áíÜëïãá ìå ôï ìÝãåèïò \n"
-"ôçò åãêáôóôáóçò ðïõ åðéëÝîáôå êáé ôçí ôá÷ýôçôá ôïõ õðïëïãéóôÞ óáò.\n"
-"\n"
-"\n"
-"Ðáñáêáëþ ðåñéìÝíåôå õðïìïíåôéêÜ."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Óå áõôü ôï óçìåßï, èá ÷ñåéáóôåß íá åðéëÝîåôå óå ðïéÝò êáôáôìÞóåéò èá "
-"åãêáôáóôÞóåôå \n"
-"ôï Mandrake Linux. ÅÜí ðñïûðÜñ÷ïõí êáôáôìÞóåéò, áðü ðáëáéüôåñç åãêáôÜóôáóç Þ "
-"áðü \n"
-"Üëëï åñãáëåßï, ìðïñåßôå íá ôéò ÷ñçóéìïðïéÞóåôå. Áëëéþò, èá ðñÝðåé íá "
-"ïñßóåôå \n"
-"íÝåò êáôáôìÞóåéò.\n"
-"\n"
-"\n"
-"Ãéá íá äçìéïõñãÞóåôå êáôáôìÞóåéò, ðñÝðåé ðñþôá íá åðéëÝîåôå óêëçñü äßóêï, "
-"êÜíïíôáò\n"
-"êëéê ìå ôï ðïíôßêé óôï \"hda\" óôïí ðñþôï IDE äßóêï, \"hdb\" óôïí äåýôåñï "
-"IDE, \"sda\"\n"
-"óôïí ðñþôï SCSI äßóêï êëð\n"
-"\n"
-"\n"
-"Ãéá íá êáôáôìÞóåôå äßóêï óáò, ìðïñåßôå íá åðéëÝîåôå:\n"
-"\n"
-"   * ÐëÞñçò äéáãñáöÞ: áõôÞ ç åðéëïãÞ äéáãñÜöåé üëåò ôéò êáôáôìÞóåéò ôïõ \n"
-"     åðéëåãìÝíïõ äßóêïõ.\n"
-"\n"
-"\n"
-"   * Áõôüìáôç åðéëïãÞ: ÁõôÞ ç åðéëïãÞ äçìéïõñãåß áõôüìáôá êáôáôìÞóåéò \n"
-"     ext2 êáé swap óôïí åëåýèåñï ÷þñï ôïõ äßóêïõ.\n"
-"\n"
-"\n"
-"   * ÄéÜóùóç ðßíáêá êáôáôìÞóåùí: ÅÜí ï ðßíáêáò êáôáôìÞóåùí åßíáé "
-"êáôåóôñáìÝíïò,\n"
-"     ìðïñåßôå íá ðñïóðáèÞóåôå íá ôïí åðáíáöÝñåôå. Ðáñáêáëþ íá åßóôå "
-"ðñïóåêôéêïß\n"
-"     êáé íá èõìÜóôå üôé ìðïñåß íá áðïôý÷åé.\n"
-"\n"
-"\n"
-"   * Áêýñùóç: Ãéá íá áêõñþóåôå ü,ôé Ý÷åôå êÜíåé.\n"
-"\n"
-"\n"
-"   * Åðáíáöüñôùóç: Ãéá íá áêõñþóåôå ü,ôé Ý÷åôå êÜíåé êáé íá îáíáöïñôþóåôå "
-"ôïí \n"
-"     áñ÷éêü óáò ðßíáêá êáôáôìÞóåùí.\n"
-"\n"
-"\n"
-"   * ÌÜãïò: ÅÜí èÝëåôå íá äçìéïõñãçèïýí ôåëÝéùò áõôüìáôá ïé êáôáôìÞóåéò. "
-"Óõíéóôþìåíç \n"
-"     åðéëïãÞ åÜí äåí Ý÷åôå êáëÞ ãíþóç ôçò äéáäéêáóßáò.\n"
-"\n"
-"\n"
-"   * Åðáíáöüñôùóç áðü äéóêÝôôá: ÅÜí åß÷áôå áðïèçêåýóåé ôïí ðßíáêá "
-"êáôáôìÞóåùí óå äéóêÝôôá\n"
-"     óå êÜðïéá ðñïçãïýìåíç åãêáôÜóôáóç, ìðïñåßôå íá ôïí åðáíáöÝñåôå. \n"
-"\n"
-"\n"
-"   * ÁðïèÞêåõóç óå äéóêÝôôá: Ãéá íá óþóåôå ôïí ðßíáêá êáôáôìÞóåùí óå "
-"äéóêÝôôá, þóôå íá \n"
-"     ìðïñåßôå íá ôïí åðáíáöÝñåôå. Ç ÷ñÞóç áõôÞò ôçò åðéëïãÞò óõíßóôáôáé.\n"
-"\n"
-"\n"
-"   * ÔÝëïò: ¼ôáí ôåëåéþóåôå ôçí êáôÜôìçóç, åðéëÝîôå áõôü ãéá íá êÜíåôå ôéò "
-"áëëáãÝò ìüíéìåò.\n"
-"\n"
-"\n"
-"ÐëçñïöïñéáêÜ, ìðïñåßôå íá åðéëÝîåôå üëåò ôéò åðéëïãÝò êáé ìÝóù "
-"ðëçêôñïëïãßïõ: \n"
-"Ìåôáêéíçèåßôå óôéò êáôáôìÞóåéò ÷ñçóéìïðïéþíôáò ôï ðëÞêôñï Tab êáé ôá "
-"âåëÜêéá.\n"
-"\n"
-"\n"
-"¼ôáí Ý÷åôå åðéëÝîåé ìéá êáôÜôìçóç, ìðïñåßôå íá ðáôÞóåôå:\n"
-"\n"
-"           * Ctrl-c ãéá äçìéïõñãßá êáôÜôìçóçò (üôáí Ý÷åôå åðéëÝîåé Üäåéï "
-"÷þñï)\n"
-"\n"
-"           * Ctrl-d ãéá äéáãñáöÞ êáôÜôìçóçò\n"
-"\n"
-"           * Ctrl-m ãéá ïñéóìü óçìåßïõ óýíäåóçò           \n"
-"\n"
-"           \n"
-"Åáí êÜíåôå åãêáôÜóôáóç óå Ýíá PPC ìç÷Üíçìá, èá èÝëåôå íá äçìéïõñãÞóåôå ìéá "
-"ìéêñÞ HFS 'bootstrap' êáôÜôìçóç ôïõëÜ÷éóôïí 1Ì ãéá ÷ñÞóç\n"
-"áðü ôïí yaboot bootloader. ÅÜí óêïðåýåôå íá êÜíåôå ôçí êáôÜôìçóç ìåãáëýôåñç, "
-"ð.÷. 50ÌÂ, ßóùò ôçí âñåßôå ÷ñÞóéìç ãéá áðïèÞêåõóç \n"
-"åíüò ðõñÞíá êáé ramdisk image ãéá åðßãïõóåò êáôáóôÜóåéò."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Ðåñéóóüôåñåò ôùí ìßá êáôáôìÞóåéò Windows âñÝèçêáí óôïí äßóêï óáò. Ðáñáêáëþ \n"
-"åðéëÝîôå ðïéÜ èÝëåôå íá óõññéêíþóåôå ãéá íá åãêáôáóôÞóåôå ôï Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"ÐëçñïöïñéáêÜ, êÜèå êáôÜôìçóç áíáöÝñåôáé ùò: \"¼íïìá Linux\", \"¼íïìá Windows"
-"\", \"×ùñçôéêüôçôá\".\n"
-"\n"
-"\n"
-"Ôï üíïìá Linux óçìáßíåé ôá åîÞò: Ôýðïò äßóêïõ, áñéèìüò äßóêïõ, áñéèìüò "
-"êáôÜôìçóçò \n"
-"ãéá ðáñÜäåéãìá, \"hda1\").\n"
-"\n"
-"\n"
-"Ï ôýðïò åßíáé \"hd\" åÜí ðñüêåéôáé ãéá äßóêï IDE êáé \"sd\" ãéá SCSI äßóêï.\n"
-"\n"
-"\n"
-"Ï áñéèìüò äßóêïõ åßíáé ðÜíôá Ýíá ãñÜììá ìåôÜ ôï \"hd\" Þ \"sd\". Ãéá ôïõò "
-"IDE \n"
-"äßóêïõò: \n"
-"\n"
-"   * \"a\" åßíáé ï master äßóêïò óôïí ðñþôï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"b\" åßíáé ï slave äßóêïò óôïí ðñþôï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"c\" åßíáé ï master äßóêïò óôïí äåýôåñï åëåãêôÞ IDE,\n"
-"\n"
-"   * \"d\" åßíáé ï slave äßóêïò óôïí äåýôåñï åëåãêôÞ IDE.\n"
-"\n"
-"\n"
-"Ãéá äßóêïõò SCSI, \"a\" åßíáé ï ðñþôïò äßóêïò, \"b\" åßíáé ï äåýôåñïò äßóêïò "
-"êëð...\n"
-"\n"
-"\n"
-"Ôï üíïìá Windows åßíáé ôï ãñÜììá ôçò êáôÜôìçóçò üðùò öáßíåôáé áðü ôá "
-"Windows\n"
-"(ï ðñþôïò äßóêïò Þ êáôÜôìçóç ëÝãåôáé \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå. ÁõôÞ ç äéáäéêáóßá ìðïñåß íá ðÜñåé ìåñéêÜ ëåðôÜ."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå \"ÅãêáôÜóôáóç\" åÜí äåí õðÜñ÷åé åãêáôåóôçìÝíç ðáëáéüôåñç "
-"Ýêäïóç ôïõ Mandrake Linux\n"
-"Þ åÜí èÝëåôå íá ÷ñçóéìïðïéÞóåôå ðåñéóóüôåñá ôïõ åíüò ëåéôïõñãéêÜ óõóôÞìáôá.\n"
-"\n"
-"\n"
-"ÅðéëÝîôå \"ÁíáâÜèìéóç\" åÜí èÝëåôå íá áíáâáèìßóåôå ìéá ðñïûðÜñ÷ïõóá "
-"åãêáôÜóôáóç ôïõ Mandrake Linux\n"
-"\n"
-"\n"
-"ÁíÜëïãá ìå ôéò ãíþóåéò óáò óôï GNU/Linux, ìðïñåßôå íá åðéëÝîåôå Ýíá áðü ôá "
-"ðáñáêÜôù åðßðåäá åãêáôÜóôáóçò\n"
-"Þ áíáâÜèìéóçò ôïõ Mandrake Linux:\n"
-"\n"
-"* Óõíéóôþìåíï: ÅÜí äåí Ý÷åôå îáíáåãêáôáóôÞóåé ðïôÝ Ýíá GNU/Linux óýóôçìá. Ç "
-"åãêáôÜóôáóç èá åßíáé \n"
-"  ðïëý åýêïëç êáé èá óáò æçôçèåß íá áðáíôÞóåôå ëßãåò åñùôÞóåéò.\n"
-"\n"
-"\n"
-"* ÐñïóáñìïóìÝíç: ÅÜí åßóôå åîïéêåéùìÝíïò ìå ôï GNU/Linux, ìðïñåßôå íá "
-"åðéëÝîåôå ôçí âáóéêÞ ÷ñÞóç\n"
-"  (åîõðçñåôçôÞò, óôáèìüò åñãáóßáò) ôïõ óõóôÞìáôüò óáò. Èá ÷ñåéáóôåß íá "
-"áðáíôÞóåôå óå ðåñéóóüôåñåò\n"
-"  åñùôÞóåéò, ïðüôå èá ðñÝðåé íá Ý÷åôå êÜðïéåò âáóéêÝò ãíþóåéò ó÷åôéêÜ ìå ôçí "
-"ëåéôïõñãßá ôïõ GNU/Linux.\n"
-"\n"
-"\n"
-"* Åéäéêüò: ÅÜí Ý÷åôå åìðåéñßá ìå ôï GNU/Linux. ¼ðùò êáé ðáñáðÜíù, ìðïñåßôå "
-"íá åðéëÝîåôå ôçí âáóéêÞ\n"
-"  ÷ñÞóç ôïõ óõóôÞìáôïò. Èá ìðïñÝóåôå åðßóçò íá ðñïóáñìüóåôå ôï óýóôçìá óôéò "
-"áíÜãêåò óáò ëåðôïìåñþò,\n"
-"  áëëÜ èá ÷ñåéáóôåß íá áðáíôÞóåôå óå åîåéäéêåõìÝíåò åñùôÞóåéò ðïõ "
-"ðñïûðïèÝôïõí åîåéäéêåõìÝíåò ãíþóåéò.\n"
-"  Âåâáéùèåßôå üôé îÝñåôå ôé êÜíåôå ðñùôïý åðéëÝîåôå áõôÞí ôçí åãêáôÜóôáóç."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå ôçí êáôÜëëçëç èýñá. Ãéá ðáñÜäåéãìá,\n"
-"ç COM1 óôá Windows ïíïìÜæåôáé ttyS0 óôï GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"Ôï LILO êáé ôï Grub åßíáé ðñïãñÜììáôá åêêßíçóçò: Ìðïñïýí íá åêêéíÞóïõí \n"
-"ôï GNU/Linux Þ ïðïéïäÞðïôå Üëëï ëåéôïõñãéêü õðÜñ÷åé óôï óýóôçìÜ óáò. "
-"ÊáíïíéêÜ, \n"
-"ôá åðéðëÝïí ëåéôïõñãéêÜ ðñïóäéïñßæïíôáé êáé ñõèìßæïíôáé óùóôÜ. ÅÜí áõôü "
-"äåí \n"
-"óõíÝâç, ìðïñåßôå íá ðñïóèÝóåôå åðéðëÝïí åðéëïãÝò óå áõôÞí ôçí ïèüíç. \n"
-"ÐñïóÝîôå íá åðéëÝîåôå ôéò óùóôÝò ðáñáìÝôñïõò.\n"
-"\n"
-"Ìðïñåßôå åðßóçò íá áðïêëåßóåôå ôçí ðñüóâáóç óå Üëëá ëåéôïõñãéêÜ óõóôÞìáôá "
-"áöáéñþíôáò\n"
-"ôéò áíôßóôïé÷åò åðéëïãÝò. Óå áõôÞí üìùò ôçí ðåñßðôùóç, èá ÷ñåéáóôåßôå "
-"äéóêÝôôá åêêßíçóçò\n"
-"ãéá íá ôá ÷ñçóéìïðïéÞóåôå!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"ÐñÝðåé íá ðñïóäéïñßóåôå ðïý èÝëåôå íá åãêáôáóôáèïýí ïé \n"
-"ðëçñïöïñßåò ðïõ åßíáé áðáñáßôçôåò ãéá ôçí åêêßíçóç ôïõ \n"
-"GNU/Linux.\n"
-"\n"
-"\n"
-"Åêôüò êáé áí îÝñåôå ðïëý êáëÜ ôé êÜíåôå, åðéëÝîôå \"Ðñþôïò ôïìÝáò\n"
-"ôïõ äßóêïõ (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Ôï DrakX èá ðñïóðáèÞóåé íá åíôïðßóåé ðñïóáñìïãåßò SCSI ôýðïõ PCI.\n"
-"ÅÜí ôï DrakX åíôïðßóåé Ýíáí ðñïóáñìïãÝá ðïõ îÝñåé ðþò íá ôïí "
-"÷ñçóéìïðïéÞóåé,\n"
-"èá åãêáôáóôÞóåé áõôüìáôá ôïí êáôÜëëçëï ïäçãü\n"
-"\n"
-"\n"
-"ÅÜí Ý÷åôå ðñïóáñìïãÝá SCSI ôýðïõ ISA, êÜðïéïí ìÞ áíáãíùñßóéìï PCI "
-"ðñïóáñìïãÝá \n"
-"Þ äåí Ý÷åôå êáíÝíáí ðñïóáñìïãÝá SCSI, ôï DrakX èá óáò ñùôÞóåé åÜí Ý÷åôå "
-"êÜðïéïí \n"
-"ðñïóáñìïãÝá SCSI óôï óýóôçìÜ óáò. ÅÜí äåí Ý÷åôå, ðáôÞóôå áðëþò '¼÷é'. ÅÜí "
-"ðáôÞóåôå\n"
-"'Íáé', èá óáò æçôçèåß íá áðéëÝîåôå ôïí ôýðï ôïõ áðü Ýíáí êáôÜëïãï.\n"
-"\n"
-"\n"
-"ÅÜí åðéëÝîåôå ðñïóáñìïãÝá, ôï DrakX èá óáò ñùôÞóåé åÜí èÝëåôå íá ïñßóåôå "
-"åðéëïãÝò.\n"
-"ÓõíÞèùò, áöÞíïíôáò ôï DrakX íá ñõèìßóåé áõôüìáôá ôïí ðñïóáñìïãÝá, äåí èá "
-"Ý÷åôå ðñüâëçìá.\n"
-"\n"
-"\n"
-"Óå áíôßèåôç ðåñßðôùóç, èá ðñÝðåé íá äþóåôå åðéëïãÝò ãéá ôïí ïäçãü. \n"
-"Óõìâïõëåõôåßôå ôïí Ïäçãü ÅãêáôÜóôáóçò ãéá ôï ðþò èá âñåßôå áõôÝò ôéò \n"
-"ðëçñïöïñßåò áðü ôçí åãêáôÜóôáóç ôùí Windows (áí õðÜñ÷åé), áðü ôçí "
-"ôåêìçñßùóç\n"
-"ôïõ õëéêïý Þ áðü ôçí éóôïóåëßäá ôïõ êáôáóêåõáóôÞ (áí Ý÷åôå ðñüóâáóç óôï "
-"Internet)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"ÅðéëÝîôå ôïí äßóêï ðïõ èÝëåôå íá äéáãñÜøåôå ãéá íá åãêáôáóôÞóåôå \n"
-"ôçí íÝá êáôÜôìçóç Mandrake Linux. ÐÑÏÓÏ×Ç: ¼ëá ôá äåäïìÝíá èá äéáãñáöïýí\n"
-"êáé èá åßíáé áäýíáôç ç åðáíáöïñÜ ôïõò."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ÐáôÞóôå \"OK\" åÜí èÝëåôå íá äéáãñÜøåôå üëá ôá äåäïìÝíá êáé ôéò \n"
-"êáôáôìÞóåéò óå áõôüí ôïí äßóêï. Ðñïóï÷Þ, ìåôÜ áðü áõôü äåí èá ìðïñåßôå \n"
-"íá åðáíáöÝñåôå ïðïéáäÞðïôå äåäïìÝíá ðïõ âñßóêïíôáé áõôÞ ôç óôéãìÞ óôïí \n"
-"äßóêï, óõìðåñéëáìâáíïìÝíùí êáé ïðïéïíäÞðïôå äåäïìÝíùí áðü ôá Windows.\n"
-"\n"
-"\n"
-"ÐáôÞóôå \"Áêýñùóç\" ãéá íá áêõñþóåôå áõôÞí ôçí äéáäéêáóßá ÷ùñßò íá ÷Üóåôå \n"
-"äåäïìÝíá êáé êáôáôìÞóåéò ðïõ âñßóêïíôáé óôïí äßóêï."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"¸÷åôå åðéëÝîåé ôïõò ðáñáêÜôù åîõðçñåôçôÝò: %s\n"
-"\n"
-"\n"
-"Áõôïß ïé åîõðçñåôçôÝò åíåñãïðïéïýíôáé åî' ïñéóìïý. Äåí Ý÷ïõí êÜðïéá ãíùóôÜ "
-"ðñïâëÞìáôá\n"
-"áóöáëåßáò, áëëÜ ìðïñåß íá âñåèïýí êÜðïéá êáéíïýñéá. Óå áõôÞí ôçí ðåñßðôùóç, "
-"ðñÝðåé íá áíáâáèìßóåôå\n"
-"ôï óõíôïìüôåñï äõíáôüí.\n"
-"\n"
-"\n"
-"ÈÝëåôå íá åãêáôáóôÞóåôå áõôïýò ôïõò åîõðçñåôçôÝò;\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Äåí ìðïñþ íá ÷ñçóéìïðïéÞóù broadcast ÷ùñßò NIS domain"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ÅéóÜãåôå ìéá FAT ìïñöïðïéçìÝíç äéóêÝôôá óôïí ïäçãü %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "ÁõôÞ ç äéóêÝôôá äåí åßíáé ìïñöïðïéçìÝíç FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Ãéá íá ÷ñçóéìïðïéÞóåôå áõôÞí ôçí áðïèçêåõìÝíç åðéëïãÞ ðáêÝôùí, îåêéíÞóôå ôçí "
-"åãêáôÜóôáóç ìå ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "ÓöÜëìá êáôÜ ôçí áíÜãíùóç ôïõ áñ÷åßïõ %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¸íá ìÝñïò ôïõ õëéêïý óáò ÷ñåéÜæåôáé ``éäéüêôçôïõò'' ïäçãïýò ãéá íá "
-"ëåéôïõñãÞóåé.\n"
-"Ìðïñåßôå íá âñåßôå ó÷åôéêÝò ðëçñïöïñßåò óôï: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"ÐñÝðåé íá Ý÷åôå ìéá âáóéêÞ êáôÜôìçóç.\n"
-"ÄçìéoõñãÞóôå Þ åðéëÝîôå ìéá êáôÜôìçóç.\n"
-"ÌåôÜ ïñßóôå ùò óçìåßï óýíäåóçò ôï `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "ÐñÝðåé íá Ý÷åôå ìéá êáôÜôìçóç swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Äåí Ý÷åôå ïñßóåé êáôÜôìçóç swap\n"
-"\n"
-"Íá óõíå÷ßóù;"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "ÐñÝðåé íá Ý÷åôå ìéá êáôÜôìçóç FAT mounted óôï /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "×ñÞóç åëåýèåñïõ ÷þñïõ"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Äåí õðÜñ÷åé áñêåôüò åëåýèåñïò ÷þñïò ãéá äçìéïõñãßá íÝùí êáôáôìÞóåùí"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "×ñÞóç õðÜñ÷ïíôùí êáôáôìÞóåùí"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Äåí õðÜñ÷ïõí êáôáôìÞóåéò ðñïò ÷ñÞóç"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "×ñÞóç êáôÜôìçóçò Windows ãéá loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ÐïéÜ êáôÜôìçóç èÝëåôå íá ÷ñçóéìïðïéÞóåôå ãéá ôï Linux4Win;"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "ÅðéëÝîôå ôá ìåãÝèç"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "ÌÝãåèïò âáóéêÞò êáôÜôìçóçò óõóôÞìáôïò óå MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "ÌÝãåèïò êáôÜôìçóçò swap óå MB"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "×ñÞóç ôïõ åëåýèåñïõ ÷þñïõ óôçí êáôÜôìçóç ôùí Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Óå ôé ôýðï êáôÜôìçóçò èÝëåôå íá áëëÜîåôå ìÝãåèïò;"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Õðïëïãéóìüò ïñßùí óõóôÞìáôïò áñ÷åßùí Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Äåí ìðïñþ íá áëëÜîù ìÝãåèïò óôçí êáôÜôìçóç FAT, \n"
-"ðñïêëÞèçêå ôï ðáñáêÜôù ëÜèïò: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Ç êáôÜôìçóç ôùí Windows åßíáé ðïëý êáôáêåñìáôéóìÝíç, ðáñáêáëþ ôñÝîôå ðñþôá "
-"ôï ``defrag'' "
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÐÑÏÓÏ×Ç!\n"
-"\n"
-"Ôï DrakX ðñÝðåé ôþñá íá áëëÜîåé ôï ìÝãåèïò ôçò êáôÜôìçóçò ôùí Windows.\n"
-"Ç äéáäéêáóßá áõôÞ åìðåñéÝ÷åé êéíäýíïõò. ÅÜí äåí ôï Ý÷åôå êÜíåé Þäç,\n"
-"èá ðñÝðåé íá åëÝãîåôå ôçí êáôÜôìçóç ìå êÜðïéï ó÷åôéêü ðñüãñáììá (ð÷\n"
-"scandisk) êáé êáôÜ ðåñßðôùóç íá ôçí áðïêáôáêåñìáôïðïéÞóåôå (defragment).\n"
-"ÌåôÜ èá ðñÝðåé íá êñáôÞóåôå áíôßãñáöï áóöáëåßáò ôùí äåäïìÝíùí óáò.\n"
-"ÅÜí åßóôå óßãïõñïé, ðáôÞóôå Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Ôé ÷þñï èÝëåôå íá êñáôÞóåôå ãéá ôá windows óôï"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "êáôÜôìçóç %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ÁëëáãÞ ìåãÝèïõò FAT áðÝôõ÷å: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Äåí õðÜñ÷ïõí FAT êáôáôìÞóåéò ãéá áëëáãÞ ìåãÝèïõò Þ ãéá ÷ñÞóç ùò loopback (Þ "
-"äåí õðÜñ÷åé áñêåôüò ÷þñïò)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "ÄéáãñáöÞ ïëüêëçñïõ ôïõ äßóêïõ"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Áöáßñåóç Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"¸÷åôå ðåñéóóüôåñïõò áðü Ýíáí äßóêïõò, óå ðïéüí èÝëåôå íá åãêáôáóôÞóåôå ôï "
-"Linux;"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"¼ëåò ïé õðÜñ÷ïõóåò êáôáôìÞóåéò êáé ôá äåäïìÝíá ôïõò óôïí äßóêï %s èá ÷áèïýí"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "ÐñïóáñìïóìÝíåò êáôáôìÞóåéò äßóêïõ"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "×ñÞóç fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ìðïñåßôå ôþñá íá êáôáôìÞóåôå ôïí äßóêï %s\n"
-"¼ôáí ôåëåéþóåôå, ìçí îå÷Üóåôå íá áðïèçêåýóåôå ðáôþíôáò `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Äåí Ý÷åôå áñêåôü åëåýèåñï ÷þñï óôçí êáôÜôìçóç ôùí Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Äåí ìðïñþ íá âñþ áñêåôü ÷þñï ãéá åãêáôÜóôáóç"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ôï DrakX âñÞêå ôéò ðáñáêÜôù ëýóåéò:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ç êáôÜôìçóç áðÝôõ÷å: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Åêêßíçóç äéêôýïõ"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "ÄéáêïðÞ ëåéôïõñãßáò äéêôýïõ."
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"ÐñïêëÞèçêå óöÜëìá ðïõ äåí îÝñù ðþò íá ôï ÷åéñéóôþ.\n"
-"ôïõ õëéêïý Þ áðü ôçí éóôïóåëßäá ôïõ êáôáóêåõáóôÞ (áí Ý÷åôå ðñüóâáóç óôï "
-"Internet).Óõíå÷ßóôå ìå äéêéÜ óáò åõèýíç."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äéðëü óçìåßï óýíäåóçò %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"ÌåñéêÜ óçìáíôéêÜ ðáêÝôá äåí åãáôáóôÜèçêáí óùóôÜ.\n"
-"Ï ïäçãüò CD-ROM Þ ôï CD-ROM åßíáé åëëáôùìáôéêü.\n"
-"ÅëÝãîôå ôï CD-ROM óå Ýíá Üëëï óýóôçìá ÷ñçóéìïðïéþíôáò ôçí åíôïëÞ \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Êáëþò Þñèáôå óôï %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Äåí õðÜñ÷åé äéáèÝóéìïò ïäçãüò äéóêÝôôáò"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ÂÞìá `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ôï óýóôçìÜ óáò äåí Ý÷åé áñêåôïýò ðüñïõò. Ìðïñåß íá áíôéìåôùðßóåôå "
-"ðñïâëÞìáôá\n"
-"óôçí åãêáôÜóôáóç ôïõ Mandrake Linux. ÅÜí óõìâåß áõôü, ìðïñåßôå íá äïêéìÜóåôå "
-"åãêáôÜóôáóç êåéìÝíïõ.\n"
-"ÐáôÞóôå F1 êáôÜ ôçí åêêßíçóç áðü CDROM, ìåôÜ ãñÜøôå `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Ôýðïò åãêáôÜóôáóçò"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Ðáñáêáëþ åéóÜãåôå ôéò ðáñáêÜôù ðëçñïöïñßåò"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ôï óõíïëéêü ìÝãåèïò ôùí ïìÜäùí ðïõ åðéëÝîáôå åßíáé ðåñßðïõ %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ÅÜí èÝëåôå íá åãêáôáóôÞóåôå ëéãüôåñá,\n"
-"åðéëÝîôå ôï ðïóïóôü ôùí ðáêÝôùí ðïõ èÝëåôå íá åãêáôáóôÞóåôå.\n"
-"\n"
-"¸íá ÷áìçëü ðïóïóôü èá åãêáôáóôÞóåé ìüíï ôá ðéï óçìáíôéêÜ ðáêÝôá.\n"
-"¸íá ðïóïóôü 100% èá åãêáôáóôÞóåé üëá ôá åðéëåãìÝíá ðáêÝôá."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¸÷åôå óôï äßóêï óáò ÷þñï ìüíï ãéá ôï %d%% áõôþí ôùí ðáêÝôùí.\n"
-"\n"
-"ÅÜí èÝëåôå íá åãêáôáóôÞóåôå ëéãüôåñá áðü áõôÜ,\n"
-"åðéëÝîôå ôï ðïóïóôü ôùí ðáêÝôùí ðïõ èÝëåôå íá åãêáôáóôÞóåôå.\n"
-"¸íá ÷áìçëü ðïóïóôü èá åãêáôáóôÞóåé ìüíï ôá ðéï óçìáíôéêÜ ðáêÝôá.\n"
-"¸íá ðïóïóôü %d%% èá åãêáôáóôÞóåé üóï ðåñéóóüôåñá ãßíåôáé."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Èá ìðïñÝóåôå íá êÜíåôå ëåðôïìåñÝóôåñç åðéëïãÞ óôï åðüìåíï âÞìá."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Ðïóïóôü ðáêÝôùí ðñïò åãêáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "ÅðéëïãÞ ïìÜäùí ðáêÝôùí"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "ÅðéëïãÞ îå÷ùñéóôþí ðáêÝôùí"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Óõíïëéêü ìÝãåèïò: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "ËÜèïò ðáêÝôï"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "¼íïìá: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "¸êäïóç: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "ÌÝãåèïò: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Óçìáóßá: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Äåí ìðïñåßôå íá åðéëÝîåôå áõôü ôï ðáêÝôï äéüôé äåí õðÜñ÷åé áñêåôüò ÷þñïò"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Èá åãêáôáóôáèïýí ôá ðáñáêÜôù ðáêÝôá"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Èá áöáéñåèïýí ôá ðáñáêÜôù ðáêÝôá "
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Äåí ìðïñåßôå íá åðéëÝîåôå/áðïåðéëÝîåôå áõôü ôï ðáêÝôï"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Áõôü åßíáé áðáéôïýìåíï ðáêÝôï, äåí ìðïñåß íá áðïåðéëåãåß"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Äåí ìðïñåßôå íá áðïåðéëÝîåôå áõôü ôï ðáêÝôï. Åßíáé Þäç åãêáôåóôçìÝíï"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Áõôü ôï ðáêÝôï ðñÝðåé íá áíáâáèìéóôåß\n"
-"Åßóôå óßãïõñïò üôé èÝëåôå íá ôï áðïåðéëÝîåôå;"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Äåí ìðïñåßôå íá áðïåðéëÝîåôå áõôü ôï ðáêÝôï. ÐñÝðåé íá áíáâáèìéóôåß"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Áõôüìáôç ðñïâïëÞ åðéëåãìÝíùí ðáêÝôùí"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "ÅãêáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Öüñôùóç/ÁðïèÞêåõóç óå äéóêÝôôá"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "ÁíáíÝùóç åðéëåãìÝíùí ðáêÝôùí"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "ÅëÜ÷éóôç ÅãêáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "ÅðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "ÅãêáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Åêôßìçóç"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "ÅíáðïìÝíùí ÷ñüíïò "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå, ðñïåôïéìáóßá åãêáôÜóôáóçò"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ðáêÝôá"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "ÅãêáôÜóôáóç ðáêÝôïõ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Áðïäï÷Þ"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "¶ñíçóç"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"ÁëëáãÞ Cd-Rom!\n"
-"\n"
-"Ðáñáêáëþ åéóÜãåôå ôï Cd-Rom ìå üíïìá \"%s\" óôïí ïäçãü óáò êáé ðáôÞóôå Ïê.\n"
-"ÅÜí äåí ôï Ý÷åôå, ðáôÞóôå Áêýñùóç ãéá áðïöõãÞ åãêáôÜóôáóçò áðü áõôü ôï CdRom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Íá óõíå÷ßóù;"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "ÐñïêëÞèçêå óöÜëìá êáôÜ ôçí ôáîéíüìçóç ôùí ðáêÝôùí:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "ÐñïêëÞèçêå óöÜëìá êáôÜ ôçí åãêáôÜóôáóç ôùí ðáêÝôùí:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Ðñïåéäïðïßçóç\n"
-"\n"
-"Ðáñáêáëþ äéáâÜóôå ðñïóå÷ôéêÜ ôïõò üñïõò ðáñáêÜôù. Åáí äéáöùíåßôå ìå \n"
-"ïðïéïäÞðïôå êïììÜôé, äåí óáò åðéôñÝðåôáé íá åãêáôáóôÞóåôå ôï åðüìåíï ìÝóï "
-"CD. ÐáôÞóôå \n"
-"'Äéáöùíþ' ãéá íá óõíå÷ßóåôå ôçí åãêáôÜóôáóç ÷ùñßò áõôÜ ôá ìÝóá.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "ÐñïêëÞèçêå óöÜëìá"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "ÈÝëåôå íá åðáíåêêéíÞóåôå ôï äßêôõï;"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "¶äåéá ÷ñÞóçò"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"ÅéóáãùãÞ\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Ðëçêôñïëüãéï"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Ðáñáêáëþ åðéëÝîôå äéáñýèìéóç ðëçêôñïëïãßïõ."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "ÁõôÞ åßíáé ç ðëÞñçò ëßóôá ôùí äéáèÝóéìùí ðëçêôñïëïãßùí"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Ôé ôýðï åãêáôÜóôáóçò ðñïôéìÜôå;"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "ÅãêáôÜóôáóç/ÁíáâÜèìéóç"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ðñüêåéôáé ãéá åãêáôÜóôáóç Þ ãéá áíáâÜèìéóç;"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Óõíéóôþìåíï"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ãéá åéäéêïýò"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "ÁíáâÜèìéóç"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "ÁíáíÝùóç åðéëåãìÝíùí ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Ðáñáêáëþ åðéëÝîôå ôýðï ðïíôéêéïý."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Èýñá ðïíôéêéïý"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå óåéñéáêÞ èýñá óôçí ïðïßá åßíáé óõíäåäåìÝíï ôï ðïíôßêé óáò."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Ðñïóïìïßùóç Êïõìðéþí"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Ðñïóïìïßùóç 2 Êïõìðéþí"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Ðñïóïìïßùóç 3 Êïõìðéþí"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Ñýèìéóç êáñôþí PCMCIA "
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Ñýèìéóç IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "äåí õðÜñ÷ïõí äéáèÝóéìåò êáôáôìÞóåéò"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "ÁíÜëõóç êáôáôìÞóåùí ãéá ðñïóäéïñéóìü óçìåßùí óýíäåóçò."
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "ÅðéëÝîôå óçìåßá óýíäåóçò"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Äåí ìðïñþ íá äéáâÜóù ôïí ðßíáêá êáôáôìÞóåùí, åßíáé ðïëý êáôåóôñáìÝíïò :(\n"
-"Èá ðñïóðáèÞóù íá óõíå÷ßóù áöáéñþíôáò ôéò ëáíèáóìÝíåò êáôáôìÞóåéò êáé ÏËÁ\n"
-"ôá äåäïìÝíá èá ÷áèïýí. Ç Üëëç åðéëïãÞ óáò åßíáé íá ìçí åðéôñÝøåôå óôï \n"
-"DrakX íá áããßîåé ôïí ðßíáêá êáôáôìÞóåùí. Ôï óöÜëìá åßíáé: %s\n"
-"\n"
-"Óõìöùíåßôå íá äéáãñáöïýí üëåò ïé êáôáôìÞóåéò;\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Ôï DiskDrake áðÝôõ÷å íá äéáâÜóåé óùóôÜ ôïí ðßíáêá êáôáôìÞóåùí.\n"
-"Óõíå÷ßóôå ìå äéêÞ óáò åõèýíç!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Äåí õðÜñ÷åé åëåýèåñïò ÷þñïò ãéá 1MB bootstrap! Ç åãêáôÜóôáóç èá óõíå÷éóôåß, "
-"áëëÜ ãéá íá îåêéíÞóåôå ôï óýóôçìÜ óáò, èá ÷ñåéáóôåß íá äçìéïõñãÞóåôå ìéá "
-"êáôÜôìçóç bootstrap ìå ôï DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Äåí âñÝèçêå êáôÜôìçóç root ãéá ôçí ðñáãìáôïðïßçóç ôçò áíáâÜèìéóçò"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root Partition (âáóéêÞ êáôÜôìçóç óõóôÞìáôïò)"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "ÐïéÜ åßíáé ç âáóéêÞ êáôÜôìçóç (/) ôïõ óõóôÞìáôüò óáò;"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Áðáéôåßôáé åðáíåêêßíçóç ãéá íá åíåñãïðïéçèïýí ïé áëëáãÝò óôïí ðßíáêá "
-"êáôáôìÞóåùí"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "ÅðéëÝîôå êáôáôìÞóåéò ðñïò ìïñöïðïßçóç"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "¸ëåã÷ïò ãéá ÷áëáóìÝíá blocks;"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ìïñöïðïßçóç êáôáôìÞóåùí"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Äçìéïõñãßá êáé ìïñöïðïßçóç áñ÷åßïõ %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Äåí õðÜñ÷åé áñêåôü swap ãéá ôçí ïëïêëÞñùóç ôçò åãêáôÜóôáóçò, ðáñáêáëþ "
-"ðñïóèÝóôå"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "ØÜ÷íù ãéá äéáèÝóéìá ðáêÝôá"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ðñïóäéïñéóìüò ðáêÝôùí ðñïò áíáâÜèìéóç"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ôï óýóôçìÜ óáò äåí Ý÷åé áñêåôü äéáèÝóéìï ÷þñï ãéá åãêáôÜóôáóç Þ áíáâÜèìéóç (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "ÐëÞñçò (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "ÅëÜ÷éóôç (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Óõíéóôþìåíç (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå ôç öüñôùóç Þ áðïèÞêåõóç ôùí åðéëïãÞò ðáêÝôùí óôç "
-"äéóêÝôôá.\n"
-"Ç ìïñöïðïßçóç åßíáé ç ßäéá ìå ôéò äéóêÝôôåò áõôüìáôçò åãêáôÜóôáóçò."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Öüñôùóç áðü äéóêÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Öüñôùóç áðü äéóêÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "ÅðéëïãÞ ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "ÅéóÜãåôå äéóêÝôôá ðïõ ðåñéÝ÷åé ôçí åðéëïãÞ ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "ÁðïèÞêåõóç óå äéóêÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Ôï åðéëåãìÝíï ìÝãåèïò åßíáé ìåãáëýôåñï áðü ôï äéáèÝóéìï ÷þñï"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"ÅÜí Ý÷åôå üëá ôá ðáñáêÜôù CDs, ðáôÞóôå Ok.\n"
-"ÅÜí äåí Ý÷åôå êáíÝíá áðü ôá ðáñáêÜôù CDs, ðáôÞóôå Áêýñùóç.\n"
-"ÅÜí äåí Ý÷åôå êÜðïéá áðü áõôÜ, áðïåðéëÝîôå ôá êáé ðáôÞóôå Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ïíüìáôé \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ðñïåôïéìáóßá åãêáôÜóôáóçò"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"ÅãêáôÜóôáóç ðáêÝôïõ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Ñõèìßóåéò ìåôÜ ôçí åãêáôÜóôáóç"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ðáñáêáëþ åéóÜãåôå ôç äéóêÝôôá Åêêßíçóçò óôïí ïäçãü %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ðáñáêáëþ åéóÜãåôå ôç äéóêÝôôá ÁíáíÝùóçò ÁñèñùìÜôùí óôïí ïäçãü %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ìðïñåßôå ôþñá íá êáôåâÜóåôå êñõðôïãñáöéêü ëïãéóìéêü.\n"
-"\n"
-"ÐÑÏÓÏ×Ç:\n"
-"\n"
-"Ëüãù ôùí äéáöïñåôéêþí íüìùí ðïõ éó÷ýïõí óå äéÜöïñá ìÝñç ó÷åôéêÜ ìå ôçí "
-"êñõðôïãñáößá,\n"
-"ï ÷ñÞóôçò ðñÝðåé íá âåâáéùèåß üôé ïé íüìïé ðïõ ôïí áöïñïýí ôïõ åðéôñÝðïõí íá "
-"êáôåâÜóåé,\n"
-"áðïèçêåýóåé êáé/ç ÷ñçóéìïðïéÞóåé áõôü ôï ëïãéóìéêü.\n"
-"\n"
-"Ï ÷ñÞóôçò ðñÝðåé íá ðñïóÝîåé íá ìçí ðáñáâåß ôïõò ó÷åôéêïýò íüìïõò. Ôõ÷üí "
-"ðáñáâßáóç áõôþí\n"
-"ôùí íüìùí, ìðïñåß íá åðéöÝñåé êõñþóåéò.\n"
-"\n"
-"Óå êáìßá ðåñßðôùóç ç Mandrakesoft, ïé êáôáóêåõáóôÝò êáé ïé ðñïìçèåõôÝò ôçò "
-"äåí öÝñïõí åõèýíç\n"
-"ãéá ïðïéåóäÞðïôå æçìéÝò (ðïõ ðåñéëáìâÜíïõí ìåôáîý Üëëùí áðþëåéá êåñäþí, "
-"äéáôÜñáîç ëåéôïõñãßáò\n"
-"åðé÷åßñçóçò, áðþëåéá ðëçñïöïñéþí êáé ôõ÷üí êüóôç ðïõ èá ðñïêýøïõí áðü "
-"íïìéêÝò åõèýíåò.\n"
-"\n"
-"Ãéá ðåñéóóüôåñåò ðëçñïöïñßåò åðéêïéíùíÞóôå \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Óýíäåóç ãéá ëÞøç ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "ÅðéëÝîôå ôüðï áðü ôïí ïðïßï èá ãßíåé ç ëÞøç ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Óýíäåóç ãéá ëÞøç ðáêÝôùí"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "ÐïéÜ åßíáé ç æþíç þñáò;"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Ôï ñïëüé ôïõ õðïëïãéóôÞ óáò åßíáé ñõèìéóìÝíï óå GMT (þñá ÃêñÞíïõúôò)"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Áõôüìáôïò óõã÷ñïíéóìüò þñáò (÷ñÞóç NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "ÅîõðçñåôçôÞò NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "ÊáíÝíáò åêôõðùôÞò"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "¸÷åôå áëëïí;"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ðåñßëçøç"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Ðïíôßêé"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "ÙñïëïãéáêÞ Æþíç"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "ÅêôõðùôÞò"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "KÜñôá ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "ÊÜñôá Þ÷ïõ"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "ÊÜñôá TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "ÔïðéêÜ áñ÷åßá"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Óõíèçìáôéêü root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "×ùñßò óõíèçìáôéêü"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Áõôü ôï óõíèçìáôéêü åßíáé ðïëý áðëü (ðñÝðåé íá åßíáé ôïõëÜ÷éóôïí %d "
-"÷áñáêôÞñåò ìáêñý)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Ðéóôïðïßçóç ôáõôüôçôáò"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Ðéóôïðïßçóç LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "ÅîõðçñåôçôÞò LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Åîáêñßâùóç NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Ðåñéï÷Þ (domain) NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "ÅîõðçñåôçôÞò NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ìéá ðñïóáñìïóìÝíç äéóêÝôôá åêêßíçóçò óáò äßíåé ôçí äõíáôüôçôá íá åêêéíÞóåôå\n"
-"ôï óýóôçìÜ óáò ÷ùñßò ôçí ÷ñÞóç ôïõ ðñïãñÜììáôïò åêêßíçóçò. Áõôü åßíáé "
-"÷ñÞóéìï åÜí äåí èÝëåôå\n"
-"íá åãêáôáóôÞóåôå ôï SILO , åÜí êÜðïéï Üëëï ëåéôïõñãéêü êáôáóôñÝøåé ôï SILO\n"
-"Þ åÜí ïé ñõèìßóåéò óáò äåí åðéôñÝðïõí ôç ÷ñÞóç SILO. ÁõôÞ ç äéóêÝôôá ìðïñåß\n"
-"åðßóçò íá ÷ñçóéìïðïéçèåß óå óõíäõáóìü ìå ôçí äéóêÝôôá äéÜóùóçò ôïõ "
-"Mandrake,\n"
-"êÜíïíôáò åõêïëüôåñç ôçí åðáíáöïñÜ ôïõ óõóôÞìáôïò ìåôÜ áðü óïâáñÞ âëÜâç.\n"
-"ÈÝëåôå íá äçìéïõñãÞóåôå äéóêÝôôá åêêßíçóçò;"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ðñþôïò ïäçãüò äéóêÝôáò"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Äåýôåñïò ïäçãüò äéóêÝôáò"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "ÐáñÜëåéøç"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ìéá ðñïóáñìïóìÝíç äéóêÝôôá åêêßíçóçò óáò äßíåé ôçí äõíáôüôçôá íá åêêéíÞóåôå\n"
-"ôï óýóôçìÜ óáò ÷ùñßò ôçí ÷ñÞóç ôïõ ðñïãñÜììáôïò åêêßíçóçò. Áõôü åßíáé "
-"÷ñÞóéìï åÜí äåí èÝëåôå\n"
-"íá åãêáôáóôÞóåôå ôï LILO (Þ ôï grub), åÜí êÜðïéï Üëëï ëåéôïõñãéêü "
-"êáôáóôñÝøåé ôï LILO\n"
-"Þ åÜí ïé ñõèìßóåéò óáò äåí åðéôñÝðïõí ôç ÷ñÞóç LILO. ÁõôÞ ç äéóêÝôôá ìðïñåß\n"
-"åðßóçò íá ÷ñçóéìïðïéçèåß óå óõíäõáóìü ìå ôçí äéóêÝôôá äéÜóùóçò ôïõ "
-"Mandrake,\n"
-"êÜíïíôáò åõêïëüôåñç ôçí åðáíáöïñÜ ôïõ óõóôÞìáôïò ìåôÜ áðü óïâáñÞ âëÜâç.\n"
-"ÈÝëåôå íá äçìéïõñãÞóåôå äéóêÝôôá åêêßíçóçò;\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "ËõðÜìáé, äåí õðÜñ÷åé äéáèÝóéìïò ïäçãüò äéóêÝôôáò"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ÅðéëÝîôå ïäçãü äéóêÝôôáò ãéá äçìéïõñãßá äéóêÝôôáò åêêßíçóçò"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "ÅéóÜãåôå äéóêÝôôá óôïí ïäçãü %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Äçìéïõñãßá äßóêïõ åêêßíçóçò"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ðñïåôïéìáóßá ðñïãñÜììáôïò åêêßíçóçò"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Öáßíåôáé ðùò Ý÷åôå Ýíá Áñ÷áßï Þ ¶ãíùóôï\n"
-" ìç÷Üíçìá, ï yaboot bootloader äåí èá äïõëÝøåé ãéá óáò.\n"
-"Ç åãêáôÜóôáóç èá óõíå÷éóôåß, áëëÜ\n"
-"èá ÷ñåéáóôåß íá ÷ñçóéìïðïéÞóåôå ôï BootX ãéá íá îåêéíÞóåôå ôï ìç÷ÜíçìÜ óáò"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "ÈÝëåôå íá ÷ñçóéìïðïéÞóåôå ôï aboot;"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"ÓöÜëìá êáôÜ ôçí åãêáôÜóôáóç ôïõ aboot, \n"
-"ðñïóðÜèåéá âåâéáóìÝíçò åãêáôÜóôáóçò, áêüìá êáé áí áõôü Ý÷åé óáí áðïôÝëåóìá "
-"ôçí êáôáóôñïöÞ ôçò ðñþôçò êáôÜôìçóçò;"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Åãê. ðñ. åêêßíçóçò"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ç åãêáôÜóôáóç ôïõ ðñïãñÜììáôïò åêêßíçóçò áðÝôõ÷å. ÐñïêëÞèçêå ôï áêüëïõèï "
-"óöÜëìá:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ìðïñåß íá ÷ñåéáóôåß íá áëëÜîåôå ôçí Open Firmware boot-óõóêåõÞ þóôå íá\n"
-" åíåñãïðïéÞóåôå ôïí bootloader.  Áí óôï reboot äåí äåßôå ôçí ðñïôñïðÞ ôïõ\n"
-" bootloader, ðáôÞóôå ôï Command-Option-O-F êáôÜ ôï reboot êáé åéóÜãåôå:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Ôüôå ôõðþóôå: shut-down\n"
-"Óôçí åðüìåíç åêêßíçóç èá ðñÝðåé íá äåßôå ôçí ðñïôñïðÞ ôïõ bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ÅéóÜãåôå Üäåéá äéóêÝôôá óôïí ïäçãü %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Ðñïåôïéìáóßá äéóêÝôáò áõôüìáôçò åãêáôÜóôáóçò"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"ÌåñéêÜ âÞìáôá äåí ïëïêëçñþèçêáí.\n"
-"\n"
-"ÈÝëåôå óßãïõñá íá åãêáôáëåßøåôå ôþñá;"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Óõã÷áñçôÞñéá, ç åãêáôÜóôáóç ïëïêëçñþèçêå.\n"
-"ÁöáéñÝóôå ôçí äéóêÝôôá Þ ôï CD åêêßíçóçò êáé ðáôÞóôå return ãéá "
-"åðáíåêêßíçóç.\n"
-"\n"
-"\n"
-"Ãéá ðëçñïöïñßåò ó÷åôéêÜ ìå äéïñèþóåéò áõôÞò ôçò Ýêäïóçò ôïõ Mandrake Linux,\n"
-"óõìâïõëåõôåßôå ôçí óåëßäá \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Ðëçñïöïñßåò ó÷åôéêÜ ìå ôéò ñõèìßóåéò ôïõ óõóôÞìáôüò óáò õðÜñ÷ïõí óôï "
-"ó÷åôéêü\n"
-"êåöÜëáéï ôïõ åðßóçìïõ ïäçãïý ÷ñÞóçò ôïõ Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Ðñïåôïéìáóßá äéóêÝôôáò áõôüìáôçò åãêáôÜóôáóçò"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ç áõôüìáôç åãêáôÜóôáóç ìðïñåß íá åßíáé ðëÞñùò áõôüìáôç,\n"
-"óå áõôÞí ôçí ðåñßðôùóç èá áíáëÜâåé ôï óêëçñü äßóêï!!\n"
-"(áõôü áíáöÝñåôáé ãéá ðåñéðôþóåéò åãêáôÜóôáóçò óå Üëëï õðïëïãéóôÞ).\n"
-"\n"
-"Ìðïñåß íá ðñïôéìÜôå íá åðáíáëÜâåôå ôçí åãêáôÜóôáóç.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Áõôüìáôï"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Åðáíáöüñôùóç"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "ÁðïèÞêåõóç åðéëïãÞò ðáêÝôùí"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "ÅãêáôÜóôáóç Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ÁëëáãÞ ðåäßïõ     | <Space> åðéëïãÞ | <F12> åðüìåíç ïè. "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ôï kdesu ëåßðåé"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "ÅðéëÝîôå ðñÜîç"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr " Ãéá Ðñï÷ùñçìÝíïõò"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Ðëçñïöïñßåò"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "ÁíÜðôõîç äÝíôñïõ"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Óýìðôõîç äÝíôñïõ"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "ÅíáëëáãÞ ìåôáîý åðßðåäçò êáé ïìáäéêÞò ôáîéíüìçóçò"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "ÊáêÞ åðéëïãÞ, îáíáäïêéìÜóôå\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ç åðéëïãÞ óáò; (åî' ïñéóìïý %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ç åðéëïãÞ óáò; (åî' ïñéóìïý %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "ÅðéëïãÝò: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "ÈÝëåôå íá ÷ñçóéìïðïéÞóåôå ôï aboot;"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ç åðéëïãÞ óáò; (åî' ïñéóìïý %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "ÔóÝ÷éêï (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Ãåñìáíéêü"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Éóðáíéêü"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Öéíëáíäéêü"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ãáëëéêü"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Íïñâçãéêü"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Ðïëùíéêü"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ñùóéêü"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Óïõçäéêü"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "ÌåãÜëç Âñåôáííßá (UK)"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Ç.Ð.Á. (US)"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Áëâáíéêü"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Áñìåíéêü (ðáëéü)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Áñìåíéêü (ãñáöïìç÷áíÞ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Áñìåíéêü (öùíçôéêü)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "ÁæåñìðáúôæÜí (Ëáôéíéêü)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Âåëãéêü"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Áñìåíéêü (öùíçôéêü)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Âïõëãáñéêü"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "ÂñáæéëéÜíéêï"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Ëåõêïñùóßáò"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Åëâåôéêü (ÃåñìáíéêÞ äéáñýèìéóç)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Åëâåôéêü (ÃáëëéêÞ äéáñýèìéóç)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "ÔóÝ÷éêï (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Ãåñìáíéêü (÷ùñßò íåêñÜ ðëÞêôñá)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Äáíéêü"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (ÇÐÁ)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Íïñâçãéêü)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (ÇÐÁ)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Åóèïíéêü"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ãåùñãßá (\"Ñùóéêç\" äéáñýèìéóç)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ãåùñãßá (\"ËáôéíéêÞ\" äéáñýèìéóç)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Åëëçíéêü"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ïõããñéêü"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Êñïáôéêü"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "ÉóñáÞë"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "ÉóñáÞë (öùíçôéêü)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Éñáíéêü"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Éóëáíäéêü"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Éôáëéêü"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Éáðùíéêü 106 ðëÞêôñùí"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "ÊïñåÜôéêï Ðëçêôñïëüãéï"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "ËáôéíéêÞò ÁìåñéêÞò"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëéèïõáíéêü AZERTY (ðáëéü)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëéèïõáíéêü AZERTY (íÝï)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëéèïõáíéêü \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëéèïõáíéêü \"öùíçôéêü\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Ôïðïèåóßá"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "ÌáêåäïíéêÞ"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Ïëëáíäéêü"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Ðïëùíéêü (äéáñýèìéóç qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Ðïëùíéêü (äéáñýèìéóç qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Ðïñôïãáëëéêü"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Êáíáäéêü (ÊåìðÝê)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Ñïõìáíéêü (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Ñïõìáíéêü (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ñùóéêü (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Óëïâåíßáò"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Óëïâáêßáò (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Óëïâáêßáò (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "ÁæåñìðáúôæÜí (êõñéëëéêü)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Ðßíáêáò"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Ôïõñêéêü (ðáñáäïóéáêü \"F\" ìïíôÝëï)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Ôïõñêéêü (ìïíôÝñíï \"Q\" ìïíôÝëï)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ïõêñáíéêü"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US äéåèíÝò"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "ÂéåôíÜì \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Ãéïõãêïóëáâéêü (ëáôéíéêü/êõñéëëéêü)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ÊõêëéêÝò óõíäÝóåéò %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "ÁöáéñÝóôå ôá logical volumes ðñþôá\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ãåíéêïý ôýðïõ ðïíôßêé PS2 ìå ñïäÜêé"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 ðëÞêôñïõ"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Ãåíéêïý ôýðïõ ìå 2 ðëÞêôñá"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Ãåíéêü"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ìå ñïäÜêé"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "óåéñéáêü"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Ãåíéêïý ôýðïõ ìå 3 ðëÞêôñá"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (óåéñéáêü, ðáëéüò C7 ôýðïò)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "Äýï ðëÞêôñùí"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "Ôñéþí ðëÞêôñùí"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "êáíÝíá"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "×ùñßò ðïíôßêé"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Ðáñáêáëþ äïêéìÜóôå ôï ðïíôßêé"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Ãéá åíåñãïðïßçóç ðïíôéêéïý"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÊÉÍÇÓÔÅ ÔÏ ÑÏÄÁÊÉ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "ÔÝëïò"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Åðüìåíï -»"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Ðñïçãïýìåíï"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Óùóôü;"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Óýíäåóç óôï Äéáäßêôõï"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Ï ðéï êïéíüò ôñüðïò óýíäåóçò adsl åßíáé pppoe.\n"
-"ÏñéóìÝíåò óõíäÝóåéò ÷ñçóéìïðïéïýí pptp, êÜðïéåò ëßãåò dhcp.\n"
-"ÅÜí äåí îÝñåôå, åðéëÝîôå '÷ñÞóç pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "÷ñÞóç dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "÷ñÞóç pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "÷ñÞóç pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Ðïéüí ðåëÜôç dhcp èÝëåôå íá ÷ñçóéìïðïéÞóåôå;\n"
-"Ç ðñïåðéëïãÞ åßíáé dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ Ethernet óôï óýóôçìÜ óáò.\n"
-"Äåí ìðïñþ íá ñõèìßóù áõôïý ôïõ ôýðïõ ôçí óýíäåóç."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "ÅðéëÝîôå óõóêåõÞ äéêôýïõ"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå ðïéÜ óõóêåõÞ äéêôýïõ èÝëåôå íá ÷ñçóéìïðïéÞóåôå ãéá ôçí "
-"óýíäåóç óôï Äéáäßêôõï"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå ôï üíïìá ôïõ óõóôÞìáôïò Ýáí ôï îÝñåôå.\n"
-"ÏñéóìÝíïé åîõðçñåôçôÝò DHCP äåí ëåéôïõñãïýí ÷ùñßò áõôü.\n"
-"Ôï üíïìá áõôü ðñÝðåé íá åßíáé Ýíá ðëÞñåò üíïìá óõóôÞìáôïò,\n"
-"üðùò ð.÷. ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "¼íïìá óõóôÞìáôïò"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Ïäçãüò Ñýèìéóçò Äéêôýïõ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Åîùôåñéêü ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "ÅóùôåñéêÞ êÜñôá ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Ôß åßäïõò åßíáé ç ISDN óýíäåóÞ óáò;"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"ÐïéÜ ISDN ñýèìéóç ðñïôéìÜôå;\n"
-"\n"
-"* Ç ðáëéÜ ñýèìéóç ÷ñçóéìïðïéåß ôï isdn4net. ÐåñéÝ÷åé ÷ñÞóéìá åñãáëåßá,\n"
-"  áëëÜ åßíáé ëßãï äýóêïëï ãéá Ýíáí áñ÷Üñéï íá ñõèìéóôåß êáé ü÷é óôåñåüôõðï.\n"
-"\n"
-"* Ç ÍÝá ñýèìéóç åßíáé åõêïëüôåñç óôçí êáôáíüçóç, ðåñéóóüôåñï óôåñåüôõðç,\n"
-"  áëëÜ ìå ëéãüôåñá åñãáëåßá.\n"
-"\n"
-"Ðñïôåßíïõìå ôçí åëáöñéÜ ñýèìéóç.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "ÍÝá ñýìèéóç (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ÐáëéÜ ñýìèéóç (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Ñõèìßóåéò ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"ÅðéëÝîôå ôïí ðáñï÷Ýá óáò\n"
-" ÅÜí äåí åßíáé óôïí êáôÜëïãï, åðéëÝîôå Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Ðñùôüêïëëï Åêêßíçóçò"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Åõñþðç (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Õðüëïéðïò êüóìïò"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Õðüëïéðïò êüóìïò \n"
-" ÷ùñßò D-Channel (ìéóèùìÝíåò ãñáììÝò)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Ðïéü ðñùôüêïëëï èÝëåôå íá ÷ñçóéìïðïéÞóåôå;"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Ôß êÜñôá Ý÷åôå;"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Äåí îÝñù"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ÅÜí Ý÷åôå ISA êÜñôá, ïé ôéìÝò óôçí åðüìåíç ïèüíç èá ðñÝðåé íá åßíáé óùóôÝò.\n"
-"\n"
-"ÅÜí Ý÷åôå PCMCIA êÜñôá, ðñÝðåé íá îÝñåôå ôï irq êáé ôï io ôçò êÜñôáò óáò.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Áêýñùóç"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "ÓõíÝ÷åéá"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ÐïéÜ åßíáé ç ISDN êÜñôá óáò;"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Åíôüðéóá ìéá ISDN êÜñôá, áëëÜ äåí îÝñù ôïí ôýðï ôçò. Ðáñáêáëþ åðéëÝîôå ìéá "
-"êÜñôá PCI áðü ôçí ðáñáêÜôù ïèüíç."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Äåí âñÝèçêå êÜñôá ISDN. Ðáñáêáëþ åðéëÝîôå ìéá áðü ôçí ðáñáêÜôù ïèüíç."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Óå ðïéÜ óåéñéáêÞ ðüñôá åßíáé óõíäåäåìÝíï ôï modem óáò;"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "ÅðéëïãÝò dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "¼íïìá óýíäåóçò"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Áñéèìüò ôçëåöþíïõ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "×ñÞóç script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "×ñÞóç ôåñìáôéêïý"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "¼íïìá äéêôýïõ"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Ðñþôïò åîõðçñåôçôÞò DNS (ðñïáéñåôéêü)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Äåýôåñïò åîõðçñåôçôÞò DNS (ðñïáéñåôéêü)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìðïñåßôå íá áðïóõíäåèåßôå Þ íá åðáíáñõèìßóåôå ôçí óýíäåóÞ óáò."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Ìðïñåßôå íá åðáíáñõèìßóåôå ôçí óýíäåóÞ óáò."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "ÁõôÞ ôç óôéãìÞ åßóôå óõíäåäåìÝíïé óôï Äéáäßêôõï."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Ìðïñåßôå íá óõíäåèåßôå óôï Äéáäßêôõï Þ íá åðáíáñõèìßóåôå ôçí óýíäåóÞ óáò."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "ÁõôÞ ôç óôéãìÞ äåí åßóôå óõíäåäåìÝíïé óôï Äéáäßêôõï."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Óýíäåóç"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Áðïóýíäåóç"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Óýíäåóç êáé ñýèìéóç Äéáäéêôýïõ (internet)"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ôþñá èá ñõèìßóïõìå ôçí %s óýíäåóç."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ôþñá èá ñõèìßóïõìå ôçí %s óýíäåóç.\n"
-"\n"
-"\n"
-"ÐáôÞóôå ôï OK ãéá íá îåêéíÞóåôå"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Ñõèìßóåéò äéêôýïõ"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"ÅðåéäÞ êÜíåôå ìéá äéêôõáêÞ åãêáôÜóôáóç, ôï äßêôõï åßíáé Þäç ñõèìéóìÝíï.\n"
-"ÊÜíôå êëßê óôï Ïê ãéá íá äéáôçñÞóåôå ôéò ñõèìßóåéò óáò, Þ Üêõñï ãéá íá "
-"îáíáñõèìßóåôå ôç óýíäåóç óôï Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Êáëþò Þëèáôå óôïí Ïäçãü Ñýèìéóçò ôïõ Äéêôýïõ\n"
-"\n"
-"Åßìáóôå Ýôïéìïé íá ñõèìßóïõìå ôç óýíäåóÞ óáò óôï internet/äßêôõï.\n"
-"Áí äåí èÝëåôå íá ÷ñçóéìïðïéÞóåôå ôçí áõôüìáôç áíß÷íåõóç, îåôóåêÜñåôå ôï "
-"checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "ÅðéëÝîôå ôï ðñïößë ãéá ñýèìéóç"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "×ñÞóç áõôüìáôçò áíß÷íåõóçò"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Åíôïðéóìüò óõóêåõþí..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "ÁðëÞ óýíäåóç ìå modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "áíé÷íåýèçêå óôçí ðüñôá %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Óýíäåóç ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "áíé÷íåýèçêå ôï %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Óýíäåóç ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "áíé÷íåýôçêå óôçí äéåðéöÜíåéá %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "ÊáëùäéáêÞ óýíäåóç"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "áíé÷íåýèçêå êáëùäéáêÞ óýíäåóç"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Óýíäåóç LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "êÜñôá(åò) ethernet áíé÷íåýèçêáí"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "ÅðéëÝîôå ôç óýíäåóç ðïõ èÝëåôå íá ñõèìßóåôå"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"¸÷åôå ñõèìßóåé ðïëëïýò ôñüðïõò ãéá íá óõíäÝåóôå óôï Internet.\n"
-"ÅðéëÝîôå áõôüí ðïõ èÝëåôå íá ÷ñçóéìïðïéÞóåôå.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Óýíäåóç Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "ÈÝëåôå íá óõíäÝåóôå êáôÜ ôçí åêêßíçóç;"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Ñõèìßóåéò äéêôýïõ"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"¸íá ðñüâëçìá åìöáíßóôçêå êáôÜ ôçí åðáíåêêßíçóç ôïõ äéêôýïõ: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Óõã÷áñçôÞñéá, ç ñýèìéóç äéêôýïõ êáé internet ôåëåßùóå.\n"
-"\n"
-"Ïé ñõèìßóåéò èá åöáñìïóôïýí ôþñá óôï óýóôçìÜ óáò.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Áöïý ãßíåé áõôü, ðñïôåßíïõìå íá îáíáîåêéíÞóåôå ôï ×\n"
-"ðåñéâÜëëïí ãéá íá áðïöýãåôå ôá ðñïâëÞìáôá áëëáãÞò hostname."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ÐÑÏÓÏ×Ç: ÁõôÞ ç óõóêåõÞ åßíáé Þäç ñõèìéóìÝíç ãéá íá óõíäÝåôáé ìå ôï  "
-"Äéáäßêôõï.\n"
-"ÁðëÜ ðáôÞóôå OK ãéá íá êñáôÞóåôå ôéò õðÜñ÷ïõóåò ñõèìßóåéò.\n"
-"ÁëëÜæïíôáò ôá ðáñáêÜôù ðåäßá èá áëëÜîåôå ôçí õðÜñ÷ïõóá ñýèìéóç."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå ôéò IP ñõèìßóåéò ãéá áõôü ôï óýóôçìá.\n"
-"ÊÜèå óôïé÷åßï ðñÝðåé íá åéóá÷èåß ùò IP äéåýèõíóç óå ïêôáäéêÞ\n"
-"ìïñöÞ (ðáñÜäåéãìá: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ñýèìéóç óõóêåõÞò äéêôýïõ %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Äéåýèõíóç IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "ÌÜóêá äéêôýïõ"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Áõôüìáôï IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Ç IP äéåýèõíóç ðñÝðåé íá åßíáé óå ìïñöÞ 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå ôï üíïìá ôïõ óõóôÞìáôïò.\n"
-"Ôï üíïìá áõôü ðñÝðåé íá åßíáé Ýíá ðëÞñåò üíïìá óõóôÞìáôïò,\n"
-"üðùò ð.÷. ``mybox.mylab.myco.com''.\n"
-"Ìðïñåßôå åðßóçò íá åéóÜãåôå êáé ôçí äéåýèõíóç IP ôçò ðýëçò äéêôýïõ"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "ÅîõðçñåôçôÞò DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "ÓõóêåõÞ ðýëçò"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Ñõèìßóåéò proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Ï proxy ðñÝðåé íá åßíáé http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Ï proxy ðñÝðåé íá åßíáé ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå íá óõíäåèåßôå óôï Äéáäßêôõï ôþñá;"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "ÄïêéìÞ óýíäåóçò... "
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ôï óýóôçìá äåí åßíáé óõíäåäåìÝíï óôï Äéáäßêôõï."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Ãéá ëüãï ÁóöÜëåéáò, èá áðïóõíäåèåßôå ôþñá."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Ôï óýóôçìÜ óáò äåí öáßíåôáé íá åßíáé óõíäåäåìÝíï óôï Äéáäßêôõï.\n"
-"ÄïêéìÜóôå íá åðáíáñõèìßóåôå ôçí óýíäåóÞ óáò."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Ñõèìßóåéò óëõíäåóçò"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Ðáñáêáëþ åëÝãîôå Þ óõìðëçñþóôå ôï ðáñáêÜôù ðåäßï"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ êÜñôáò"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA êÜñôáò"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO êÜñôáò"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 êÜñôáò"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 êÜñôáò"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ðñïóùðéêüò áñéèìüò ôçëåöþíïõ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "¼íïìá ðáñï÷Ýá (ð.÷. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Áñéèìüò ôçëåöþíïõ ðáñï÷Ýá"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (ðñïáéñåôéêü)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (ðñïáéñåôéêü)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "ÅðéëÝîôå ðëçêôñïëüãéï"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Ôñüðïò êëÞóçò"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Ôá÷ýôçôá óýíäåóçò"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "×ñüíïò óýíäåóçò: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "'Ïíïìá ëïãáñéáìïý (user name)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Óõíèçìáôéêü ëïãáñéáóìïý"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "óýíäåóç áðÝôõ÷å: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ç åêôåôáìÝíç êáôÜôìçóç äåí õðïóôçñßæåôáé óå áõôüí ôïí ôýðï óõóôÞìáôïò"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"ÕðÜñ÷åé Ýíá êåíü óôïí ðßíáêá êáôáôìÞóåùí ìá äåí ìðïñþ íá ôï ÷ñçóéìïðïéÞóù.\n"
-"Ç ìïíáäéêÞ ëýóç åßíáé íá ìåôáêéíÞóåôå ôéò ðñùôåýïõóåò êáôáôìÞóåéò óáò Ýôóé "
-"þóôå ôï êåíü íá âñåèåß äßðëá óôçí åêôåôáìÝíç êáôÜôìçóç"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ç åðáíáöïñÜ áðü ôï áñ÷åßï %s áðÝôõ÷å: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "ÓöÜëìá åããñáöÞò óôï áñ÷åßï %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ÊÜôé êáêü óõìâáßíåé óôï äßóêï óáò. \n"
-"¸íá ôÝóô åëÝã÷ïõ ôçò áêåñáéüôçôáò ôùí äåäïìÝíùí áðÝôõ÷å. \n"
-"Áõôü óçìáßíåé ðùò ç ïðïéáäÞðïôå åããñáöÞ óôï äßóêï èá êáôáëÞîåé óáí ôõ÷áßá "
-"óêïõðßäéá"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ðñÝðåé íá õðÜñ÷åé"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "óçìáíôéêü"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ðïëý êáëü"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "êáëü"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ßóùò"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Ôïðéêüò åêôõðùôÞò"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "ÅêôõðùôÞò äéêôýïõ (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "ÅîõðçñåôçôÞò åêôõðþóåùí"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "ÓõóêåõÞ åêôõðùôÞ URI"
-
-#: ../../printer.pm_.c:55
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "ÄéáóùëÞíùóç óôçí åíôïëÞ"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Ôïðéêüò åêôõðùôÞò"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "ÓöÜëìá åããñáöÞò óôï áñ÷åßï %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(module %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP äéåýèõíóç åîõðçñåôçôÞ CUPS:"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (ÅðéëïãÞ åî' ïñéóìïý)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Ôñüðïò óýíäåóçò åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Ðþò åßíáé óõíäåäåìÝíïò ï åêôõðùôÞò óáò;"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Ìå ôçí ÷ñÞóç åîõðçñåôçôÞ CUPS, äåí ÷ñåéÜæåôáé íá ñõèìßóåôå åêôõðùôÝò \n"
-"åäþ. Ïé åêôõðùôÝò èá áíáãíùñéóôïýí áõôüìáôá, åêôüò áí Ý÷åôå åîõðçñåôçôÞ\n"
-"óå äéáöïñåôéêü äßêôõï. Óå áõôÞí ôçí ðåñßðôùóç, èá ðñÝðåé íá äçëþóåôå ôçí\n"
-"IP äéåýèõíóç ôïõ åîõðçñåôçôÞ CUPS êáé ßóùò êáé ôïí áñéèìü èýñáò."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Ñýèìéóç LÁÍ"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Ç IP äéåýèõíóç ðñÝðåé íá åßíáé óå ìïñöÞ 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Ï áñéèìüò èýñáò ðñÝðåé íá åßíáé áêÝñáéïò áñéèìüò!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP äéåýèõíóç åîõðçñåôçôÞ CUPS:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Èýñá"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Boot Ôýðïõ Ñýèìéóç"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Åíôïðéóìüò óõóêåõþí..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "ÄïêéìÞ èõñþí"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "ÐñïóèÞêç åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Ôïðéêüò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "×ñÞóç áõôüìáôçò áíß÷íåõóçò"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "áíé÷íåýèçêå ôï %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "ÓõóêåõÞ åêôõðùôÞ URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Ôïðéêüò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Óå ðïéÜ óåéñéáêÞ ðüñôá åßíáé óõíäåäåìÝíï ôï modem óáò;"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "ÓõóêåõÞ åêôõðùôÞ URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Ñõèìßóåéò ÷ñùìÜôùí"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "ÅãêáôÜóôáóç ðáêÝôïõ %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "ÅãêáôÜóôáóç ðáêÝôïõ %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "ÁíÜãíùóç âÜóçò ïäçãþí CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "ÁíÜãíùóç âÜóçò ïäçãþí CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "ÅðéëïãÝò áðïìåìáêñõóìÝíïõ lpd åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Ãéá íá ÷ñçóéìïðïéÞóåôå ìéá áðïìåìáêñõóìÝíç ïõñÜ åêôýðùóçò\n"
-"lpd, ðñÝðåé íá äþóåôå ôï äéêôõáêü üíïìá ôïõ åîõðçñåôçôÞ \n"
-"åêôõðþóåùí, êáèþò êáé ôï üíïìá ôçò ïõñÜò ôçí ïðïßá èá \n"
-"÷ñçóéìïðïéÞóåôå óå áõôüí ôïí åîõðçñåôçôÞ."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "ÁðïìåìáêñõóìÝíï äéêôõáêü üíïìá:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "ÁðïìåìáêñõóìÝíï äéêôõáêü üíïìá ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "ÁðïìåìáêñõóìÝíï äéêôõáêü üíïìá ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ÅðéëïãÝò åêôõðùôÞ SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Ãéá íá åêôõðþóåôå óå Ýíáí SMB åêôõðùôÞ, ðñÝðåé íá äþóåôå ôï \n"
-"SMB äéêôõáêü üíïìá (Óçìåßùóç! Ìðïñåß íá åßíáé äéáöïñåôéêü áðü \n"
-"ôï äéêôõáêü üíïìá TCP/IP!) êáé ßóùò êáé ôçí äéåýèõíóç IP ôïõ \n"
-"åîõðçñåôçôÞ åêôõðþóåùí, ôï üíïìá ôïõ åêôõðùôÞ óôïí ïðïßï åðéèõìåßôå \n"
-"ðñüóâáóç, êáèþò êáé ïðïéáäÞðïôå áðáñáßôçôç ðëçñïöïñßá ðåñß êùäéêïý \n"
-"÷ñÞóôç, ëÝîçò êëåéäß êáé ôïìÝá Þ ïìÜäáò åñãáóßáò."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Äéêôõáêü üíïìá SMB åîõðçñåôçôÞ:"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP äéåýèõíóç SMB åîõðçñåôçôÞ:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "¼íïìá ðüñïõ:"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "ÏìÜäá åñãáóßáò:"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Åßôå ôï üíïìá ôïõ åîõðçñåôçôÞ Þ ç IP ôïõ ðñÝðåé íá äïèïýí!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Ôï üíïìá ãéá ôçí Samba ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "ÅðéëïãÝò åêôõðùôÞ NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Ãéá íá åêôõðþóåôå óå Ýíáí åêôõðùôÞ NetWare, ðñÝðåé íá äþóåôå\n"
-"ôï üíïìá ôïõ åîõðçñåôçôÞ åêôõðþóåùí NetWare (Óçìåßùóç! Ìðïñåß\n"
-"íá åßíáé äéáöïñåôéêü áðü ôï äéêôõáêü üíïìá TCP/IP!), \n"
-"ôï üíïìá ôïõ åêôõðùôÞ óôïí ïðïßï åðéèõìåßôå ðñüóâáóç, êáèþò êáé\n"
-"ïðïéáäÞðïôå áðáñáßôçôç ðëçñïöïñßá ðåñß êùäéêïý ÷ñÞóôç êáé ëÝîçò êëåéäß."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "ÅîõðçñåôçôÞò åêôõðþóåùí"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "¼íïìá ïõñÜò åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Ôï üíïìá ôïõ åîõðçñåôçôÞ NCP ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Ôï üíïìá ôçò NCP ïõñÜò ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "ÅðéëïãÝò åêôõðùôÞ socket"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Ãéá íá åêôõðþóåôå óå Ýíáí åêôõðùôÞ socket, ðñÝðåé íá äþóåôå ôï \n"
-"äéêôõáêü üíïìá ôïõ åêôõðùôÞ êáé ðñïáéñåôéêÜ ôïí áñéèìü èýñáò."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "¼íïìá åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "¼íïìá åêôõðùôÞ ëåßðåé!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "ÓõóêåõÞ åêôõðùôÞ URI"
-
-#: ../../printerdrake.pm_.c:888
-#, fuzzy
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Ìðïñåßôå íá ïñßóåôå êáôåõèåßáí ôï URI ãéá ôçí ðñüóâáóç óôïí åêôõðùôÞ. Ôï URI "
-"ðñÝðåé íá ôçñåß åßôå ôéò CUPS åßôå ôéò Foomatic ðñïäéáãñáöÝò. ¼÷é ðùò äåí "
-"õðïóôçñßæïíôáé üëïé ïé URI ôýðïé áðü üëá ôá spoolers."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "¸íá óùóôü URI ðñÝðåé íá åéóá÷èåß!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"ÊÜèå åêôõðùçò ÷ñåéÜæåôáé Ýíá üíïìá (ð.÷. lp).\n"
-"Ôá ðåäßá ÐåñéãñáöÞ êáé Ôïðïèåóßá äåí ÷ñåéÜæåôáé íá \n"
-"óõìðëçñùèïýí. Åßíáé áðëÜ ó÷üëéá ãéá ôïõò ÷ñÞóôåò."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "¼íïìá åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "ÐåñéãñáöÞ"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ôïðïèåóßá"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "ÁíÜãíùóç âÜóçò ïäçãþí CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Óùóôü;"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "ÅðéëïãÞ ìïíôÝëïõ åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Ôß ôýðïõ åêôõðùôÞ Ý÷åôå;"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "ÅðéëïãÞ %s ðñÝðåé íá åßíáé áêÝñáéïò áñéèìüò!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "ÅðéëïãÞ %s ðñÝðåé íá åßíáé áñéèìüò!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "ÅðéëïãÞ %s åêôüò ïñßïõ!"
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "ÈÝëåôå íá åêôõðþóåôå ìéá äïêéìáóôéêÞ óåëßäá;"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "ÄïêéìÞ èõñþí"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "ÅêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ôõðéêü"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Ìßá Þ ðåñéóóüôåñåò äïêéìáóôéêÝò óåëßäåò óôÜëèçêáí óôïí åêôõðùôÞ.\n"
-"Ìðïñåß íá ðåñÜóåé êÜðïéïò ÷ñüíïò ìÝ÷ñé ç åêôýðùóç íá îåêéíÞóåé.\n"
-"ÊáôÜóôáóç åêôýðùóçò:\n"
-"%s\n"
-"\n"
-"¸ãéíå óùóôÜ ç åêôýðùóç"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Ìßá Þ ðåñéóóüôåñåò äïêéìáóôéêÝò óåëßäåò óôÜëèçêáí óôïí åêôõðùôÞ.\n"
-"Ìðïñåß íá ðåñÜóåé êÜðïéïò ÷ñüíïò ìÝ÷ñé ç åêôýðùóç íá îåêéíÞóåé.\n"
-"¸ãéíå óùóôÜ ç åêôýðùóç;"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "ÊáíÝíáò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Êëåßóéìï"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ÄéáêïðÞ ëåéôïõñãßáò äéêôýïõ."
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ÄéáêïðÞ ëåéôïõñãßáò äéêôýïõ."
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "ÅðéëïãÝò åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Ôï üíïìá ôïõ åêôõðùôÞ ðñÝðåé íá ðåñéÝ÷åé ìüíï ãñÜììáôá, áñéèìïýò êáé ôïí "
-"÷áñáêôÞñá underscore"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "ÊáíÝíáò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "ÁíÜãíùóç âÜóçò ïäçãþí CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Åêêßíçóç óýíäåóçò..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ç ïèüíç äåí Ý÷åé ñõèìéóôåß áêüìç"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Ðïéü óýóôçìá åêôýðùóçò èÝëåôå íá ÷ñçóéìïðïéÞóåôå;"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Õøçëü"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Ðáñáíïúêü"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Ðïéü óýóôçìá åêôýðùóçò èÝëåôå íá ÷ñçóéìïðïéÞóåôå;"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "ÅðéëïãÞ Spooler EêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ðïéü óýóôçìá åêôýðùóçò èÝëåôå íá ÷ñçóéìïðïéÞóåôå;"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Ñýèìéóç åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "ÅãêáôÜóôáóç ðáêÝôïõ %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "ÅðéëïãÝò åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Ñýèìéóç åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Èá èÝëáôå íá ñõèìßóåôå Ýíáí åêôõðùôÞ;"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "ÅêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"ÕðÜñ÷ïõí ïé áêüëïõèåò ïõñÝò åêôýðùóçò.\n"
-"Ìðïñåßôå íá ðñïóèÝóåôå êé Üëëåò Þ íá áëëÜîåôå ôéò õðÜñ÷ïõóåò."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"ÕðÜñ÷ïõí ïé áêüëïõèåò ïõñÝò åêôýðùóçò.\n"
-"Ìðïñåßôå íá ðñïóèÝóåôå êé Üëëåò Þ íá áëëÜîåôå ôéò õðÜñ÷ïõóåò."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "ÊáíïíéêÞ ÊáôÜóôáóç"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå ôéò ñõèìßóåéò;"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå ôéò ñõèìßóåéò;"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Óýíäåóç Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "ÅðéëïãÞ ìïíôÝëïõ åêôõðùôÞ"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Åêôýðùóç äïêéìáóôéêþí óåëßäùí..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "ÈÝëåôå íá äïêéìÜóåôå ôéò ñõèìßóåéò;"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Ôïðéêüò åêôõðùôÞò"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ÈÝëåôå íá åðáíåêêéíÞóåôå ôï äßêôõï;"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Ñýèìéóç proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Êáëþò Þëèáôå óôï åñãáëåßï ñýèìéóçò ôïõ proxy.\n"
-"\n"
-"Åäþ, èá ìðïñÝóåôå íá ñõèìßóåôå ôïõò http êáé ftp proxies\n"
-"ìå Þ ÷ùñßò login êáé êùäéêü ðñüóâáóçò\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Ðáñáêáëþ óõìðëçñþóôå ôéò ðëçñïöïñßåò ãéá ôï http proxy\n"
-"ÁöÞóôå ôá êåíÜ áí äåí åðéèõìåßôå http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ðüñôá"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Ôï URL ðñÝðåé íá îåêéíÜ ìå 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Ï áñéèìüò èýñáò ðñÝðåé íá åßíáé áñéèìçôéêüò"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Ðáñáêáëþ óõìðëçñþóôå ôéò ðëçñïöïñßåò ãéá ôï ftp proxy\n"
-"ÁöÞóôå ôá êåíÜ áí äåí åðéèõìåßôå ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Ôï Url ðñÝðåé íá îåêéíÜ ìå'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå proxy login êáé êùäéêü ðñüóâáóçò.\n"
-"ÁöÞóôå ôá êåíÜ åÜí äåí åðéèõìåßôå login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "êùäéêüò ðñüóâáóçò"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "îáíáðëçêôñïëïãÞóôå ôïí êùäéêü ðñüóâáóçò"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Ïé êùäéêïß ðñüóâáóçò åßíáé áíüìïéïé. ÐñïóðáèÞóôå îáíÜ!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Äåí ìðïñþ íá ðñïóèÝóù êáôÜôìçóç óôï _ìïñöïðïéçìÝíï_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Äåí ìðïñþ íá áðïèçêåýóù ôï áñ÷åßï %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "áðïôõ÷ßá mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "áðïôõ÷ßá mkraid (ìÞðùò áðïõóéÜæïõí ôá raidtools;)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Äåí õðÜñ÷ïõí áñêåôÝò êáôáôìÞóåéò ãéá RAID åðéðÝäïõ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Åêêßíçóç ôïõ ALSA (Advanced Linux Sound Architecture) óõóôÞìáôïò Þ÷ïõ"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, Ýíá ðñüãñáììá ðåñéïäéêÞò åêôÝëåóçò åíôïëþí."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Ôï apmd ðáñáêïëïõèåß êáé êáôáãñÜöåé ôçí êáôÜóôáóç ôçò ìðáôáñßáò.\n"
-"Ìðïñåß åðßóçò íá ÷ñçóéìïðïéçèåß ãéá ôï áõôüìáôï êëåßóéìï ôïõ óõóôÞìáôïò óå \n"
-"ðåñßðôùóç ÷áìçëÞò öüñôéóçò ôçò ìðáôáñßáò."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Åêôåëåß åíôïëÝò ðñïãñáììáôéóìÝíåò áðü ôçí åíôïëÞ at êáé äÝóìåò åíôïëþí\n"
-"üôáí ï öüñôïò ôïõ óõóôÞìáôïò åßíáé áñêåôÜ ÷áìçëüò."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Ôï cron åßíáé ìéá âáóéêÞ õðçñåóßá UNIX ðïõ ôñÝ÷åé åíôïëÝò êáèïñéóìÝíåò áðü \n"
-"ôïí ÷ñÞóôç óå ôáêôÜ ÷ñïíéêÜ äéáóôÞìáôá. Ôï vixie cron ðñïóèÝôåé Ýíáí "
-"áñéèìü \n"
-"åðéðëÝïí äõíáôïôÞôùí ðïõ ðåñéëáìâÜíïõí êáëýôåñç áóöÜëåéá êáé ðéï éó÷õñÝò "
-"ñõèìßóåéò."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Ôï GPM ðñïóèÝôåé õðïóôÞñéîç mouse óå åöáñìïãÝò âáóéóìÝíåò óå êïíóüëá\n"
-"êåéìÝíïõ êáé åðéôñÝðåé ëåéôïõñãßåò áðïêïðÞò êáé åðéêüëëçóçò ìå ÷ñÞóç \n"
-"mouse óôçí êïíóüëá, êáèþò êáé õðïóôÞñéîç áíáäõïìÝíùí menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Ôï HardDrake ôñÝ÷åé ìéá áíß÷íåõóç õëéêïý êáé ðñïáéñåôéêÜ ñõèìßæåé\n"
-"ôï íÝï/áëëáãìÝíï õëéêü."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Ï Apache åßíáé Ýíáò åîõðçñåôçôÞò WWW. Ìðïñåß íá åîõðçñåôÞóåé áñ÷åßá\n"
-"HTML êáé CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Ç õðçñåóßá õðåñåîõðçñåôçôÞ Internet (inetd) îåêéíÜåé ìéá ðïéêéëßá\n"
-"Üëëùí õðçñåóéþí inetrnet üðïôå ÷ñåéÜæïíôáé. Åßíáé õðåýèõíç ãéá ôçí \n"
-"åêêßíçóç ðïëëþí õðçñåóéþí, üðùò telnet, ftp, rsh êáé rlogin. Ç "
-"áðåíåñãïðïßçóç\n"
-"áõôÞò ôçò õðçñåóßáò áðåíåñãïðïéåß åðßóçò êáé ôéò õðçñåóßåò ãéá ôéò ïðïßåò\n"
-"åßíáé õðåýèõíç."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Åêêßíçóç ðáêÝôïõ filtering ãéá Linux ðõñÞíá ôçò óåéñÜò 2.2, ãéá ñýèìéóç\n"
-"åíüò firewall ðïõ èá ðñïóôáôåýåé ôï ìç÷ÜíçìÜ óáò áðü äéêôõáêÝò åðéèÝóåéò."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Áõôü ôï ðáêÝôï öïñôþíåé ôçí åðéëåãìÝíç äéáñýèìéóç ðëçêôñïëïãßïõ ðïõ Ý÷åé \n"
-"åðéëåãåß óôï /etc/sysconfig/keyboard. Áõôü ìðïñåß íá ñõèìéóôåß ìå ôçí \n"
-"÷ñÞóç ôïõ åñãáëåßïõ kbdconfig. ÐñÝðåé ó÷åäüí ðÜíôá íá åßíáé åíåñãïðïéçìÝíï."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Áõôüìáôç ðáñáãùãÞ ôçò åðéêåöáëßäáò ôïõ ðõñÞíá óôï /boot ãéá ôï\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Áõôüìáôç áíß÷íåõóç êáé ñýèìéóç óõóêåõþí êáôÜ ôçí åêêßíçóç ôïõ óõóôÞìáôïò."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Ôï Linuxconf êáìéÜ öïñÜ êÜíåé äéÜöïñåò åñãáóßåò\n"
-"êáôÜ ôçí åêêßíçóç ôïõ óõóôÞìáôïò ãéá íá äéáôçñÞóåé ôç ñýèìéóç ôïõ óõóôÞìáôïò."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Ôï lpd åßíáé ç õðçñåóßá åêôõðþóåùí ðïõ áðáéôåßôáé ãéá íá ëåéôïõñãåß \n"
-"ç åíôïëÞ lpd. Åßíáé âáóéêÜ Ýíáò åîõðçñåôçôÞò ðïõ ðñïùèåß ôá áñ÷åßá \n"
-"óôïõò åêôõðùôÝò."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual ÅîõðçñåôçôÞò, ÷ñçóéìïðïéåßôáé ãéá íá äçìéïõñãÞóåé Ýíáí õøçëÞò\n"
-"áðüäïóçò êáé äéáèåóéìüôçôáò åîõðçñåôçôÞ."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Ï named (BIND) åßíáé Ýíáò Domain Name Server (DNS) ðïõ ÷ñçóéìïðïéåßôáé\n"
-"ãéá íá ìåôáôñÝðåé ïíüìáôá óå äéåõèýíóåéò IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"ÓõíäÝåé êáé áðïóõíäÝåé üëá ôá äéêôõáêÜ óõóôÞìáôá áñ÷åßùí (NFS, \n"
-"SMB êáé NCP (Netware))."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Åíåñãïðïéåß/áðåíåñãïðïéåß üëá ôá õðïóõóôÞìáôá äéêôýïõ ðïõ Ý÷ïõí \n"
-"ñõèìéóôåß íá îåêéíïýí êáôÜ ôçí åêêßíçóç."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Ôï NFS åßíáé Ýíá äçìïöéëÝò ðñùôüêïëï ãéá ôïí äéáìïéñáóìü áñ÷åßùí óå \n"
-"äßêôõá TCP/IP. ÁõôÞ ç õðçñåóßá ðñïóöÝñåé ëåéôïõñãßåò åîõðçñåôçôÞ, ï \n"
-"ïðïßïò ñõèìßæåôáé áðü ôï áñ÷åßï /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Ôï NFS åßíáé Ýíá äçìïöéëÝò ðñùôüêïëï ãéá ôïí äéáìïéñáóìü áñ÷åßùí óå \n"
-"äßêôõá TCP/IP. ÁõôÞ ç õðçñåóßá ðñïóöÝñåé ëåéôïõñãßåò êëåéäþìáôïò áñ÷åßùí."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Áõôüìáôç åíåñãïðïßçóç ôïõ numlock ðëÞêôñïõ óôçí êïíóüëá\n"
-"êáé ôá XFree êáôá ôçí åêêßíçóç ôïõ óõóôÞìáôïò."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ÕðïóôÞñéîç ôùí OKI 4w êáé óõìâáôþí winprinters."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Ç õðïóôÞñéîç PCMCIA ðñïóöÝñåé õðïóôÞñéîç ãéá êÜñôåò äéêôýïõ, modems êëð \n"
-"óõíÞèùò óå óõóôÞìáôá laptop. Äåí èá åêêéíÞóåé åêôüò áí áõôü æçôçèåß áðü "
-"ôïí \n"
-"÷ñÞóôç, ïðüôå åßíáé áóöáëÝò íá åãêáôáóôáèåß óå óõóôÞìáôá ðïõ äåí ôï "
-"÷ñåéÜæïíôáé."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ï portmapper äéá÷åéñßæåôáé óõíäÝóåéò RPC, ïé ïðïßåò ÷ñçóéìïðïéïýíôáé\n"
-"áðü ðñïôüêïëá üðùò ôï NFS êáé ôï NIS. ÐñÝðåé íá åßíáé åíåñãïðïéçìÝíï óå \n"
-"óõóôÞìáôá ðïõ äñïõí ùò åîõðçñåôçôÝò ôÝôïéùí ðñïôïêüëùí."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Ôï postfix åßíáé Ýíáò ðñÜêôïñáò ìåôáöïñÜò áëëçëïãñáößáò, ôï \n"
-"ðñüãñáììá ðïõ öñïíôßæåé ãéá ôçí ìåôáöïñÜ áëëçëïãñáößáò áðü ôï \n"
-"Ýíá óýóôçìá óôï Üëëï."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Áðïèçêåýåé êáé åðáíáöÝñåé ôçí ðçãÞ åíôñïðßáò ôïõ óõóôÞìáôïò ãéá \n"
-"ôçí äçìéïõñãßá êáëýôåñçò ðïéüôçôáò ôõ÷áßùí áñéèìþí."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Ïñéóìüò raw óõóêåõþí ùò block óõóêåõþí (üðùò êáôáôìÞóåéò óêëçñþí\n"
-"äßóêùí), ãéá ôç ÷ñÞóç ôïõò áðü åöáñìïãÝò üðùò ç Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Ç õðçñåóßá routed åðéôñÝðåé ôçí áõôüìáôç åíçìÝñùóç ôïõ ðßíáêá äñïìïëüãçóçò \n"
-"IP ìÝóù ôïõ ðñùôïêüëïõ RIP. Ðáñ' üëï ðïõ ôï RIP åßíáé åõñÝùò äéáäåäïìÝíï "
-"óå \n"
-"ìéêñÜ äßêôõá, ìåãáëýôåñá äßêôõá áðáéôïýí ðåñéðëïêüôåñá ðñïôüêïëá."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ôï ðñùôüêïëï rstat åðéôñÝðåé óôïõò ÷ñÞóôåò åíüò äéêôýïõ ôçí\n"
-"óõëëïãÞ ìåôñÞóåùí åðéäüóåùí ãéá ïðïéïäÞðïôå óýóôçìá óå áõôü \n"
-"ôï äßêôõï."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ôï ðñùôüêïëï rusers åðéôñÝðåé óôïõò ÷ñÞóôåò åíüò äéêôýïõ íá \n"
-"ðñïóäéïñßóïõí ôïõò óõíäåäåìÝíïõò ÷ñÞóôåò Üëëùí óõóôçìÜôùí."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ôï ðñùôüêïëï rwho åðéôñÝðåé óå áðïìåìáêñõóìÝíïõò ÷ñÞóôåò íá äïõí Ýíáí \n"
-"êáôÜëïãï ôùí ÷ñçóôþí ôïõ óõóôÞìáôïò (ðáñüìïéï ìå ôï finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Åêêßíçóç ôïõ óõóôÞìáôïò Þ÷ïõ óôï ìç÷ÜíçìÜ óáò"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Ôï Syslog åßíáé ç õðçñåóßá ðïõ ÷ñçóéìïðïéïýí ðïëëÝò Üëëåò õðçñåóßåò \n"
-"ãéá íá êÜíïõí åããñáöÝò óôá áñ÷åßá ðáñáêïëïýèçóçò óõóôÞìáôïò (log files)\n"
-"Óõíßóôáôáé ç óõíå÷Þò ëåéôïõñãßá áõôÞò ôçò õðçñåóßáò."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Öüñôùóç ôùí ïäçãþí ãéá ôéò usb óõóêåõÝò óáò."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"ÎåêéíÜåé ôçí õðçñåóßá åîõðçñåôçôÞ ãñáììáôïóåéñþí X Font Server (áõôü åßíáé "
-"áðáñáßôçôï ãéá íá ôñÝ÷ïõí ôá XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "ÅêôõðùôÞò"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Éíôåñíåô"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "ÊáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ÅðéëïãÝò áðïìåìáêñõóìÝíïõ lpd åêôõðùôÞ"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "ÂÜóç ÄåäïìÝíùí"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ÅîõðçñåôçôÞò"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Ðñïåéäïðïßçóç"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Append"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "ÊáôÜóôáóç:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "ÔïìÝáò"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Õðüëïéðïò êüóìïò"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Ðñüóâáóç óôï Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "ÐïëõìÝóá - ÃñáöéêÜ"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "ÁíÜðôõîç"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "ÊÝíôñï ÅëÝã÷ïõ"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "ÓõóêåõÞ äéêôýïõ"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Äéêôõáêü üíïìá SMB åîõðçñåôçôÞ:"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Ðáé÷íßäéá"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ãéá åéäéêïýò"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "ÅãêáôÜóôáóç ðáêÝôïõ %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Äåí ìðïñþ íá äéáâÜóù ôïí ðßíáêá êáôáôìÞóåùí, åßíáé ðïëý êáôåóôñáìÝíïò :(\n"
-"Èá ðñïóðáèÞóù íá óõíå÷ßóù áöáéñþíôáò ôéò ëáíèáóìÝíåò êáôáôìÞóåéò"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "ÓöÜëìá!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Ñõèìßóåéò ìåôÜ ôçí åãêáôÜóôáóç"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Boot Ôýðïõ Ñýèìéóç"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Óõã÷áñçôÞñéá!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "ÅãêáôÜóôáóç"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "ÐñïóèÞêç ÷ñÞóôç"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Ìïñöïðïßçóç áñ÷åßïõ loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "ÅðéëïãÞ ðáêÝôùí"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Ðáñáêáëþ åðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "ÄéáãñáöÞ ïõñÜò"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Áöáßñåóç Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Êùäéêü üíïìá"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Ðáñáêáëþ äïêéìÜóôå ôï ðïíôßêé"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Ðáñáêáëþ ðñïóðáèÞóôå îáíÜ"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Ðáñáêáëþ ðñïóðáèÞóôå îáíÜ"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "îáíáðëçêôñïëïãÞóôå ôïí êùäéêü ðñüóâáóçò"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Óýíäåóç LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Ôñüðïò óýíäåóçò åêôõðùôÞ"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Ðáñáêáëþ åðéëÝîôå äéáñýèìéóç ðëçêôñïëïãßïõ."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Ðáñáêáëþ êÜíôå êëéê óå ìéá êáôÜôìçóç"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Ðáñáêáëþ åðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Ðáñáêáëþ äïêéìÜóôå ôï ðïíôßêé"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "ÓõóêåõÞ äéêôýïõ"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Êùäéêü üíïìá"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Ðáñáêáëþ åðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Ðáñáêáëþ åðéëÝîôå ìéá ãëþóóá."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Åíôïðéóìüò óêëçñïý äßóêïõ"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Êùäéêü üíïìá"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ìå ñïäÜêé"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ìå ñïäÜêé"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "ÐáñÜìåôñïé ïäçãïý"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Ñõèìßóåéò äéêôýïõ"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Ðáñáêáëþ åðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Ðáñáêáëþ åðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Ðñïåô. óõó. áñ÷."
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "ÅðéëïãÝò"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Óå ðïéÜ óåéñéáêÞ ðüñôá åßíáé óõíäåäåìÝíï ôï modem óáò;"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Ñõèìßóåéò äéêôýïõ"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Ðáñáêáëþ åðéëÝîôå ôýðï ðïíôéêéïý."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "ÅðáíáöïñÜ áðü äéóêÝôôá"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Ðáñáêáëþ åðéëÝîôå ôýðï ðïíôéêéïý."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "¶ëëï"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "ÅãêáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "ÅðáíáöïñÜ áðü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "ÅðáíáöïñÜ áðü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "ÐñïóáñìïóìÝíï"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_ÂïÞèåéá"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Ðñïçãïýìåíï"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "ÊáôÜóôáóç:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "ÅðáíáöïñÜ áðü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Åðüìåíï -»"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "ÅðéëïãÞ ðáêÝôùí"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Ðáñáêáëþ åðéëÝîôå ìéá ãëþóóá."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Ðáñáêáëþ åðéëÝîôå ìéá ãëþóóá."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Ðáñáêáëþ åðéëÝîôå ìéá ãëþóóá."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "ÁðïèÞêåõóç óå áñ÷åßï"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Ðáñáêáëþ äïêéìÜóôå ôï ðïíôßêé"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ðáñáêáëþ åðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Ñõèìßóåéò äéêôýïõ"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Ñõèìßóåéò äéêôýïõ"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Ñýèìéóç LÁÍ"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Ñýèìéóç LÁÍ"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Ðñïåô. óõó. áñ÷."
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Ç åãêáôÜóôáóç ôïõ %s áðÝôõ÷å. ÐñïêëÞèçêå ôï áêüëïõèï óöÜëìá:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Ïëïêëçñþèçêå"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ðñïåôïéìáóßá åãêáôÜóôáóçò"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "áðáãüñåõóç"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Ìïñöïð. êáôáôìÞó."
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Ñýèìéóç LÁÍ"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Óçìåßï óýíäåóçò"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "ÅðéëÝîôå êáôáôìÞóåéò ðñïò ìïñöïðïßçóç"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Ãñáöåßï"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Áêýñùóç"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "ÅêôõðùôÞò"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "ÅãêáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "ÅðéëÝîôå áñ÷åßï"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "ÌÞíõìá Init"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ óôï óýóôçìÜ óáò!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "ÅãêáôÜóôáóç"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ óôï óýóôçìÜ óáò!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "¸îïäïò"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet åíåñãïðïéçìÝíïò"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ç ñýèìéóç ôïõ åðéìåñéóìïý óýíäåóçò Internet Ý÷åé Þäç ãßíåé.\n"
-"ÁõôÞ ôç óôéãìÞ åßíáé åíåñãÞ.\n"
-"\n"
-"Ôß èÝëåôå íá êÜíåôå;"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "áðåíåñãïðïßçóç"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "Üêõñï"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "åðáíáñýèìéóç"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Áðåíåñãïðïßçóç åîõðçñåôçôþí..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet áðåíåñãïðïéçìÝíïò"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet áðåíåñãïðïéçìÝíïò"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ç ñýèìéóç ôïõ åðéìåñéóìïý óýíäåóçò Internet Ý÷åé Þäç ãßíåé.\n"
-"ÁõôÞ ôç óôéãìÞ åßíáé áíåíåñãüò.\n"
-"\n"
-"Ôß èÝëåôå íá êÜíåôå;"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "åíåñãïðïßçóç"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Åíåñãïðïßçóç åîõðçñåôçôþí..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Åðéìåñéóìüò óýíäåóçò Internet åíåñãïðïéçìÝíïò"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ï õðïëïãéóôÞò óáò ìðïñåß íá ñõèìéóôåß Ýôóé þóôå íá ìïéñÜæåôáé \n"
-"ôçí óýíäåóç ìå ôï äéáäßêôõï ìå Üëëïõò õðïëïãéóôÝò.\n"
-"\n"
-"Óçìåßùóç: ×ñåéÜæåóôå Ýíáí ðñïóáñìïãÝá äéêôýïõ Ýôóé þóôå íá äçìéïõñãÞóåôå Ýíá "
-"ôïðéêü äßêôõï (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "ÄéåðéöÜíåéá %s (÷ñÞóç áñèñþìáôïò %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "ÄéåðéöÜíåéá %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ óôï óýóôçìÜ óáò!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Äåí âñÝèçêå ðñïóáñìïãÝáò äéêôýïõ Ethernet óôï óýóôçìÜ óáò. Ðáñáêáëþ "
-"÷ñçóéìïðïéåßóôå ôï ðñüãñáììá ñýèìéóçò õëéêïý."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "ÓõóêåõÞ äéêôýïõ"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ÕðÜñ÷åé ìüíï Ýíáò ñõèìéóìÝíïò ðñïóáñìïãÝáò äéêôýïõ óôï óýóôçìÜ óáò:\n"
-"\n"
-"%s\n"
-"\n"
-"Èá ñõèìéóôåß ôï Ôïðéêü óáò Äßêôõï ìå áõôüí ôïí ðñïóáñìïãÝá."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Ðáñáêáëþ åðéëÝîôå ôé ðñïóáñìïãÝáò äéêôýïõ èá óõíäåèåß\n"
-"óôï ôïðéêü óáò äßêôõï."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ç ïèüíç äåí Ý÷åé ñõèìéóôåß áêüìç"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Boot Ôýðïõ Ñýèìéóç"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Ñõèìßóåéò Äéáäéêôýïõ (Internet)"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP äéåýèõíóç åîõðçñåôçôÞ CUPS:"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ÐéèáíÞ åðáíá÷ñçóéìïðïßçóç ôçò äéåýèõíóçò LAN óôçí ôñÝ÷ïõóá ñýèìéóç ôïõ %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Áíé÷íåýôçêå ñýèìéóç firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Ðñïóï÷Þ! Áíé÷íåýôçêå õðÜñ÷ïõóá ñýèìéóç firewall. ºóùò ÷ñåéáóôïýí ïñéóìÝíåò"
-"\"÷åéñïêßíçôåò\" ñõèìßóåéò ìåôÜ ôçí åãêáôÜóôáóç."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Ñýèìéóç..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ñýèìéóç, åãêáôÜóôáóç ëïãéóìéêïý, åêêßíçóç åîõðçñåôçôþí..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Ðñüâëçìá êáôÜ ôçí åãêáôÜóôáóç ôïõ ðáêÝôïõ %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"'Ïëá Ý÷ïõí ñõèìéóôåß.\n"
-"Ìðïñåßôå ôþñá íá ìïéñÜæåóôå ôçí óýíäåóÞ óáò óôï Äéáäßêôõï ìå Üëëïõò "
-"õðïëïãéóôÝò óôï ôïðéêü óáò äßêôõï, ìå ôçí ÷ñÞóç áõôüìáôçò ñýèìéóçò äéêôýïõ "
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Ç ñýèìéóç Ý÷åé Þäç ãßíåé, áëëÜ áõôÞ ôç óôéãìÞ åßíáé áðåíåñãïðïéçìÝíç."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Ç ñýèìéóç Ý÷åé Þäç ãßíåé, êáé áõôÞ ôç óôéãìÞ åßíáé åíåñãïðïéçìÝíç."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ï Åðéìåñéóìüò óýíäåóçò Internet äåí Ý÷åé ñõèìéóôåß ðïôÝ."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Ñýèìéóç åðéìåñéóìïý óýíäåóçò Äéáäéêôýïõ (internet)"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Êáëùò Þëèáôå óôï åñãáëåßï ñýèìéóçò ôïõ Åðéìåñéóìïý óýíäåóçò Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"ÊÜíôå êëßê óôï Ñýèìéóç ãéá íá îåêéíÞóåôå ôïí ïäçãü åãêáôÜóôáóçò."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ñýèìéóç äéêôýïõ (%d adapters)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Ðñïößë: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "ÄéáãñáöÞ ðñïößë..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Ðñïößë ãéá äéáãñáöÞ:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "ÍÝï ðñïößë..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "¼íïìá óõóôÞìáôïò: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Ðñüóâáóç óôï Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Ôýðïò:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Ðýëç äéêôýïõ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "ÄéåðéöÜíåéá:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "ÊáôÜóôáóç:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Ñýèìéóç Ðñüóâáóçò óôï Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Ñýèìéóç LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ïäçãüò"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "ÄéåðéöÜíåéá"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Ðñùôüêïëëï"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "ÊáôÜóôáóç:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Ñýèìéóç ôïðéêïý äéêôýïõ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "ÌÜãïò..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Åíåñãïðïßçóç"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå... ÅöáñìïãÞ ñõèìßóåùí"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "ÓõíäÝèçêå"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Äå óõíäÝèçêå"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Óýíäåóç..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Áðïóýíäåóç..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Äåí Ý÷åôå êÜðïéá ñõèéóìÝíç äéåðéöÜíåéá.\n"
-"Ñõèìßóôå ôéò êÜíïíôáò êëßê óôï 'Ñýèìéóç'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Ñýèìéóç LÁÍ"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "ÐñïóáñìïãÝáò %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Ðñùôüêïëëï Åêêßíçóçò"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Îåêßíçóáí óôçí åêêßíçóç óõóôÞìáôïò"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "ðåëÜôçò DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Äåí Ý÷åôå óýíäåóç ìå ôï internet.\n"
-"ÄçìéïõñãÞóôå ìßá êÜíïíôáò êëßê óôï 'Ñýèìéóç'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Ñýèìéóç óýíäåóçò Äéáäéêôýïõ (internet)"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Ñýèìéóç Óýíäåóçò Äéáäéêôýïõ (internet)"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Ôýðïò óýíäåóçò: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "ÐáñÜìåôñïé"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Ðýëç äéêôýïõ"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "ÊÜñôá Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "ÐåëÜôçò DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Ñýèìéóç åðéðÝäïõ áóöáëåßáò"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ÊÝíôñï ÅëÝã÷ïõ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "ÅðéëÝîôå ôï åñãáëåßï ðïõ èÝëåôå íá ÷ñçóéìïðïéÞóåôå"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Êáíáäéêü (ÊåìðÝê)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Åõñþðç"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Éóëáíäéêü"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Åõñþðç"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "óåéñéáêü"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "×ñÞóç: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Ðáñáêáëþ åðéëÝîôå äéáñýèìéóç ðëçêôñïëïãßïõ."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "ÈÝëåôå ôï BackSpace íá åðéóôñÝöåé Delete óôçí êïíóüëá;"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "ÁëëáãÞ Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ðáñáêáëþ åéóÜãåôå ôï CD åãêáôÜóôáóçò óôïí ïäçãü óáò êáé ðáôÞóôå Ïê.\n"
-"ÅÜí äåí ôï Ý÷åôå, ðáôÞóôå Áêýñùóç ãéá áðïöõãÞ äéêôõáêÞò áíáâÜèìéóçò."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Äåí ìðïñþ íá îåêéíÞóù ôï live upgrade!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Áñ÷åßï/_ÍÝï"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Áñ÷åßï/_Áíïéãìá"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Áñ÷åßï/Áðï_èÞêåõóç"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Áñ÷åßï/ÁðïèÞêåõóç _Ùò"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Áñ÷åßï/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_ÅðéëïãÝò"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/ÅðéëïãÝò/ÔÝóô"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_ÂïÞèåéá"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/ÂïÞèåéá/_Ó÷åôéêÜ ìå..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Êùäéêü üíïìá"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ìçíýìáôá"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "áíáæÞôçóç"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "¸íá åñãáëåßï ãéá íá âëÝðåôå ôá log óáò"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Ñõèìßóåéò"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ôáéñéÜæåé"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "äåí ôáéñéÜæåé"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "ÅðéëÝîôå Ýíá áñ÷åßï"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Çìåñïëüãéï"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Ðåñéå÷üìåíï ôïõ áñ÷åßïõ"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ðáñáêáëþ ðåñéìÝíåôå, åðåîåñãáóßá áñ÷åßïõ: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "ÅëáöñéÜ ñýèìéóç"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Êáëþò Þëèáôå óôï åñãáëåßï ñýèìéóçò ôïõ proxy.\n"
-"\n"
-"Åäþ, èá ìðïñÝóåôå íá ñõèìßóåôå ôïõò http êáé ftp proxies\n"
-"ìå Þ ÷ùñßò login êáé êùäéêü ðñüóâáóçò\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ÅîõðçñåôçôÞò"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Ìïñöïðïßçóç"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Ñõèìßóåéò ÷ñùìÜôùí"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "ÁðïèÞêåõóç Ùò"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Ðáñáêáëþ åðéëÝîôå ôýðï ðïíôéêéïý."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "äåí âñÝèçêå serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Åîïìïßùóç ôñßôïõ ðëÞêôñïõ;"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "ÅðéëÝîôå êÜñôá ãñáöéêþí"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "ÓõóêåõÞ åêêßíçóçò"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Ñýèìéóç Firewalling"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Ñýèìéóç firewalling"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"¸÷åôå Þäç óôçììÝíï Ýíá firewall.\n"
-"ÊÜíôå êëßê óôï Ñýèìéóç ãéá íá áëëÜîåôå Þ íá äéáãñÜøåôå ôï firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"ÊÜíôå êëßê óôï Ñýèìéóç ãéá íá óôÞóåôå Ýíá ôõðéêü firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "ÅðéëÝîôå ãëþóóá"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "ÅðéëÝîôå åãêáôÜóôáóç"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Åíôïðéóìüò óêëçñïý äßóêïõ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Ñýèìéóç ðïíôéêéïý"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "ÅðéëÝîôå ðëçêôñïëüãéï"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "ÁóöÜëåéá"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Ðñïåô. óõó. áñ÷."
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ìïñöïð. êáôáôìÞó."
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "ÅðéëïãÞ ðáêÝôùí"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "ÅãêáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "ÐñïóèÞêç ÷ñÞóôç"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ñýèìéóç äéêôýïõ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Ñýèìéóç õðçñåóéþí"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Åãê. ðñ. åêêßíçóçò"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "ÄéóêÝôá åêêßíçóçò"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Ñýèìéóç ×"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "ÅãêáôÜóôáóç óõóôÞìáôïò"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "¸îïäïò"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ñýèìéóç tinyfirewall\n"
-"\n"
-"Áõôü ñõèìßæåé ôï ðñïóùðéêü óáò firewall ãéá áõôü ôï ìç÷Üíçìá Mandrake "
-"Linux.\n"
-"Ãéá ìéá éó÷õñÞ áöïóéùìÝíç ëýóç firewall, ðáñáêáëþ êïéôÜîôå óôçí\n"
-"åéäéêåõìÝíç MandrakeSecurity Firewall äéáíïìÞ."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ôþñá èá óáò êÜíïõìå åñùôÞóåéò ãéá ôï ðïéÝò õðçñåóßåò èÝëåôå íá áöÞóåôå\n"
-"íá óõíäÝïíôáé óôï Internet.  Ðáñáêáëþ óêåöôåßôå ðñïóåêôéêÜ ãéá áõôÝò ôéò\n"
-"åñùôÞóåéò, êáèþò ç áóöÜëåéá ôïõ õðïëïãéóôÞ óáò åßíáé óçìáíôéêÞ.\n"
-"\n"
-"Ðáñáêáëþ, áí ôçí ôñÝ÷ïõóá óôéãìÞ äåí ÷ñçóéìïðïéåßôå êÜðïéá áðü áõôÝò ôéò "
-"õðçñåóßåò,\n"
-"âãÜëôå ôçí áðü ôï firewall.  Ìðïñåßôå íá áëëÜîåôå áõôÝò ôéò ñõèìßóåéò "
-"ïðïéáäÞðïôå\n"
-"óôéãìÞ èÝëåôå îáíáôñÝ÷ïíôáò áõôÞí ôçí åöáñìïãÞ!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"ÔñÝ÷åôå Ýíáí åîõðçñåôçôÞ web óå áõôü ôï ìç÷Üíçìá ðïõ ÷ñåéÜæåóôå íá ôïí "
-"âëÝðåé\n"
-"ïëüêëçñï ôï internet; Áí ôñÝ÷åôå Ýíáí åîõðñåôçôÞ web ðïõ ìüíï áõôü ôï "
-"ìç÷Üíçìá\n"
-"÷ñåéÜæåôáé íá ôïí âëÝðåé, ôüôå ìðïñåßôå íá áðáíôÞóåôå Ï×É ìå áóöÜëåéá åäù.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"ÔñÝ÷åôå name åîõðçñåôçôÞ óå áõôü ôï ìç÷Üíçìá; Áí äåí ñõèìßóáôå Ýíáí\n"
-"þóôå íá äßíåé IP êáé ðëçñïöïñßåò æþíçò óå üëï ôï internet, ðáñáêáëþ\n"
-"áðáíôÞóôå ü÷é.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping.äåí åßíáé\n"
-"êñõðôïãñáöçìÝíï -- ïðüôå êÜðïéïé ôáñáîßåò ìðïñïýí íá êëÝøïõí ôïí êùäéêü\n"
-"ðñüóâáóçò áí ôï ÷ñçóéìïðïéåßôå. To ssh åßíáé êñõðôïãñáöçìÝíï êáé äåí ôï "
-"åðéôñÝðåé áõôü."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"ÈÝëåôå íá åðéôñÝøåôå åéóåñ÷üìåíåò óõíäÝóåéò telnet;\n"
-"Áõôü åßíáé ôñáãéêÜ ìç áóöáëÝò, üðùò åîçãÞóáìå óôçí ðñïçãïýìåíç ïèüíç.\n"
-"Ðñïôåßíïõìå íá áðáíôÞóåôå ü÷é åäþ êáé íá ÷ñçóéìïðïéÞóåôå ôï ssh óôç èÝóç "
-"ôïõ\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"ÔñÝ÷åôå Ýíáí FTP åîõðçñåôçôÞ ðïõ ÷ñåéÜæåôáé íá åßíáé ðñïóâÜóéìïò óôï "
-"Internet;\n"
-"Åáí íáé, ôüôå ðñïôåßíïõìå íá ôï ÷ñçóéìïðïéåßôå ãéá Áíþíõìåò ìåôáöïñÝò. "
-"ÏðïéäÞðïôå\n"
-"êùäéêïß ðñüóâáóçò óôÝëíïíôáé áðü ôï FTP ìðïñïýí íá êëáðïýí áðü êÜðïéïõò "
-"ôáñáîßåò,\n"
-"áöïý ôï FTP åðßóçò äåí ÷ñçóéìïðïéåß êñõðôïãñÜöçóç ãéá ôçí ìåôáöïñÜ êùäéêþí "
-"ðñüóâáóçò\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"ÔñÝ÷åôå Ýíáí åîõðçñåôçôÞ ôá÷õäñïìåßïõ åäþ; Åáí óôÝëíåôå ôá \n"
-"ìçíýìáôÜ óáò ìÝóù pine, mutt Þ Üëëïõ ðåëÜôç ôá÷õäñïìåßïõ áðü ôçí êïíóüëá,\n"
-"ôüôå ðéèáíüí íá ôñÝ÷åôå.  Áëëéþò èá ðñÝðåé íá ôï ðåñéïñßóåôå ìå firewall "
-"áõôü.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"ÔñÝ÷åôå Ýíáí POP Þ IMAP åîõðçñåôçôÞ åäþ; Áõôü ÷ñçóéìïðïéåßôáé\n"
-"ãéá ðáñï÷Þ ëïãáñéáóìþí ôá÷õäñïìåßïõ ìç âáóéóìÝíïõ óôï web ãéá áíèñþðïõò \n"
-"ìÝóù áõôïý ôïõ ìç÷áíÞìáôïò.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Öáßíåôáé ðùò ôñÝ÷åôå Ýíáí 2.2 ðõñÞíá.  ÅÜí ç IP óáò\n"
-"åßíáé äõíáìéêÞ, ðñÝðåé íá ôï åðéôñÝøïõìå áõôü.  Åßíáé áõôÞ \n"
-"ç ðåñßðôùóÞ óáò;\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Óõã÷ñïíßæåôáé ç þñá ôïõ õðïëïãéóôÞ óáò ìå Üëëïí õðïëïãéóôÞ;\n"
-"Ðåñéóóüôåñï, áõôü ÷ñçóéìïðïéåßôáé áðü ìåãáëïìåóáßïõò ïñãáíéóìïýò\n"
-"ìå Unix/Linux ãéá íá óõã÷ñïíßæïíôáé ôá logs êëð.  Åáí äåí åßóôå ìÝñïò\n"
-"åíüò ìåãÜëïõ ãñáöåßïõ êáé äåí Ý÷åôå áêïýóåé ãéá áõôü, ôüôå ðéèáíüí \n"
-"íá ìçí éó÷ýåé áõôü."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Ç Ñýèìéóç ïëïêëçñþèçêå.  Íá ãñáöôïýí áõôÝò ïé áëëáãÝò óôï äßóêï;\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Áäõíáìßá áíïßãìáôïò %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "ÓöÜëìá êáôÜ ôï Üíïéãìá ôïõ %s ãéá åããñáöÞ: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Ñýèìéóç Firewalling"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Ðáñáêáëþ ðåñéìÝíåôå, ðñïåôïéìáóßá åãêáôÜóôáóçò"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "ÕðïëïãéóôÞò Äéêôýïõ (ðåëÜôçò)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ãñáöåßï"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Óôáèìüò åñãáóßáò Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Åñãáëåßá ãéá Palm Pilot Þ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Óôáèìüò åñãáóßáò"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name êáé Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr "Åñãáëåßá ãñáöåßïõ: ÅðåîåñãáóôÝò êåéìÝíïõ, ëïãéóôéêÜ öýëëá êëð"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Åñãáëåßá Þ÷ïõ: mp3 Þ midi players, ìßêôåò êëð"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Âéâëßá êáé ïäçãïß ãéá ôï Linux êáé ôï åëåýèåñï ëïãéóìéêü"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Óôáèìüò åñãáóßáò KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, êëð"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "ÐïëõìÝóá - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Åñãáëåßá ãéá áëëçëïãñáößá, íÝá, web, ìåôáöïñÜ áñ÷åßùí êáé óõíïìéëßá"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "ÂÜóç ÄåäïìÝíùí"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL Þ MySQL database åîõðçñåôçôÞò"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Åñãáëåßá ãéá íá äéåõêïëõíèåßôå óôç ñýèìéóç ôïõ õðïëïãéóôÞ óáò"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "ÐïëõìÝóá - ¹÷ïò"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Åñãáëåßá"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Ôåêìçñßùóç"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Åñãáëåßá êïíóüëáò"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "ÅîõðçñåôçôÞò ôá÷õäñïìåßïõ Postfix, åîõðçñåôçôÞò íåþí Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Óôáèìüò Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Óôáèìüò ðïëõìÝóùí"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Ñýèìéóç LÁÍ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Ðåñéóóüôåñá ãñáöéêÜ ðåñéâÜëëïíôá (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "Ôï ðåñéâÜëëïí ãñáöåßïõ KDE ìå ìéá óõëëïãÞ óõíïäåõôéêþí åñãáëåßùí"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ãñáöéêü ÐåñéâÜëëïí"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Åñãáëåßá ãéá äçìéïõñãßá êáé åããñáöÞ CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Óôáèìüò åñãáóßáò ãñáöåßïõ"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "ÅîõðçñåôçôÞò"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, êëð"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "ÐñïãñÜììáôá ãñáöéêþí üðùò ôï Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "ÂéâëéïèÞêåò áíÜðôõîçò C êáé C++, ðñïãñÜììáôá êáé Üëëá áñ÷åßá"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "ÅîõðçñåôçôÞò äéêôýïõ"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Óôáèìüò ðáé÷íéäéþí"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ÐñïãñÜììáôá áíáðáñáãùãÞò êáé äéá÷åßñçóçò video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "ÐïëõìÝóá - ÃñáöéêÜ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ÄéáóêÝäáóç (ðáé÷íßäéá)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Åñãáëåßá ãéá áðïóôïëÞ êáé ëÞøç áëëçëïãñáößáò êáé news (pine, mutt, tin...) "
-"êáé Web Browsers"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Áñ÷åéïèÝôçóç, åîïìïéùôÝò, ðáñáêïëïýèçóç"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Äéá÷åßñçóç ðñïóùðéêþí ïéêïíïìéêþí äåäïìÝíùí"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Ãñáöéêü ðåñéâÜëëïí ìå öéëéêÜ åñãáëåßá êáé åöáñìïãÝò"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ÐåëÜôåò ãéá äéáöïñåôéêÜ ðñùôüêïëëá óõìðåñéëáìâáíïìÝíïõ ôïõ ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Ðýëç Éíôåñíåô"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ÐñïãñÜììáôá áíáðáñáãùãÞò êáé äéá÷åßñçóçò video êáé Þ÷ïõ"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "¶ëëá ãñáöéêÜ ðåñéâÜëëïíôá"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "ÅðåîåñãáóôÝò êåéìÝíïõ, êåëýöç, åñãáëåßá áñ÷åßùí, ôåñìáôéêÜ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ÐñïãñÜììáôá ïéêïíïìéêÞò äéá÷åßñçóçò, üðùò ôï gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Äéá÷åßñçóç ðñïóùðéêþí äåäïìÝíùí"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "ÐïëõìÝóá - ÅããñáöÞ CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Óôáèìüò Åñãáóßáò Åðéóôçìïíéêþí åöáñìïãþí"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Áêýñùóç"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Ïëïêëçñþèçêå"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "ÅðéëÝîôå ôïí åî' ïñéóìïý ÷ñÞóôç:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "ÁðïìåìáêñõóìÝíïò åêôõðùôÞò"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Ìðïñåßôå ôþñá íá äþóåôå ðáñáìÝôñïõò ãéá ôïí ïäçãü %s"
-
-#~ msgid "mount failed"
-#~ msgstr "óýíäåóç áðÝôõ÷å"
-
-#~ msgid "Low"
-#~ msgstr "×áìçëü"
-
-#~ msgid "Medium"
-#~ msgstr "ÌÝôñéï"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Ëßãåò âåëôéþóåéò áóöáëåßáò, ç êýñéá åßíáé üôé õðÜñ÷ïõí ðåñéóóüôåñåò \n"
-#~ "ðñïåéäïðïéÞóåéò êáé Ýëåã÷ïé."
-
-#~ msgid "Boot mode"
-#~ msgstr "Ëåéôïõñãßá åêêßíçóçò"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ãéá åéäéêïýò"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Ôï GNU/Linux ÷åéñßæåôáé ôçí þñá óå GMT (\"Greenwich Mean Time\" Þ \n"
-#~ "\"ÌåóçìâñéíÞ ¿ñá ÃêñÞíïõéôò\") êáé ôçí ìåôáôñÝðåé óå ôïðéêÞ þñá\n"
-#~ "âÜóåé ôçò æþíçò þñáò ðïõ èá åðéëÝîåôå."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Óýíäåóç óôï äéáäßêôõï (internet)"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Áðïóýíäåóç áðü ôï äéáäßêôõï (internet)"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Ñýèìéóç óýíäåóçò óôï äßêôõï (ôïðéêü Þ Äéáäßêôõï)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Óå ðïéüí äßóêï èÝëåôå íá ìåôáêéíçèåßôå;"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Ðáñáêáëþ åðéëÝîôå ôá ðáêÝôá ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Ðëçñïöïñßåò"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Óôáèìüò åñãáóßáò Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "áõèåíôéêüôçôá"
-
-#~ msgid "user"
-#~ msgstr "÷ñÞóôçò"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Ðáñáêáëþ åðéëÝîôå ôýðï ðïíôéêéïý."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "¸îïäïò"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Áõôüìáôç óýíäåóç áðïóðþìåíùí ìïíÜäùí áðïèÞêåõóçò"
-
-#~ msgid "Active"
-#~ msgstr "Åíåñãü"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "¼÷é"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "¸íáò åêôõðùôÞò ôýðïõ \"%s\" åíôïðßóôçêå óôï "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "ÓõóêåõÞ ôïðéêïý åêôõðùôÞ"
-
-#~ msgid "Printer Device"
-#~ msgstr "ÓõóêåõÞ åêôõðùôÞ"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Ôï áñ÷åßï óõóêåõÞò ëåßðåé!"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "ÁðïìåìáêñõóìÝíïò åîõðçñåôçôÞò CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "ÊáôÜóôáóç óõóôÞìáôïò"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "¶ëëï"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Ðáñáêáëþ åðéëÝîôå äéáñýèìéóç ðëçêôñïëïãßïõ."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Ðáñáêáëþ êÜíôå êëéê óå ìéá êáôÜôìçóç"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Ôýðïò: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "ÊáôåóôñáìÝíï åöåäñéêü áñ÷åßï"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Ñýèìéóç ×"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "ÓõóêåõÞ åêôõðùôÞ"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Áêýñùóç"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ïê"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Êëåßóéìï"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Åêêßíçóç óýíäåóçò..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Êëåßóéìï óýíäåóçò..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Ç óýíäåóç äåí Ýêëåéóå.\n"
-#~ "ÐñïóðáèÞóôå íá ôï êÜíåôå ìüíïò óáò ôñÝ÷ïíôáò\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "ùò root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Ôï óýóôçìá äåí åßíáé óõíäåäåìÝíï óôï Äéáäßêôõï."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "ÅðéëÝîôå ôï ìÝãåèïò ðïõ èÝëåôå íá åãêáôáóôÞóåôå"
-
-#~ msgid "Total size: "
-#~ msgstr "Óõíïëéêü ìÝãåèïò: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Ðáñáêáëþ ðåñéìÝíåôå, "
-
-#~ msgid "Total time "
-#~ msgstr "Óõíïëéêüò ÷ñüíïò "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Íá ÷ñçóéìïðïéÞóù ôéò õðÜñ÷ïõóåò ñõèìßóåéò ãéá ôá ×11;"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Óå ðïéÜ óõóêåõÞ åßíáé óõíäåäåìÝíïò ï åêôõðùôÞò óáò;\n"
-#~ "(óçìåßùóç: ôï /dev/lp0 áíôéóôïé÷åß óôï LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Ðñïóï÷Þ, ï ðñïóáñìïãÝáò äéêôýïõ åßíáé Þäç ñõèìéóìÝíïò. Èá ôïí "
-#~ "åðáíáñõèìßóù."
-
-#~ msgid "New"
-#~ msgstr "ÍÝï"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "¼íïìá áðïìåìáêñõóìÝíçò ïõñÜò"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Ðáñáêáëþ êÜíôå êëéê óå ìéá êáôÜôìçóç"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Áìöéâïëï (%s), ðáñáêáëþ ðñïóäéïñéóôå êáëýôåñá\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ; (åî' ïñéóìïý %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Ç åðéëïãÞ óáò; (åî' ïñéóìïý %s åéóÜãåôå `none' ãéá êáíÝíá) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "áäõíáìßá áíïßãìáôïò ôïõ /etc/sysconfig/autologin ãéá áíÜãíùóç: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "ÈÝëåôå íá åðáíåêêéíÞóåôå ôï äßêôõï;"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Óõìöùíåßôå;"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Èá åðáíåêêéíÞóù ôçí ðáñáêÜôù óõóêåõÞ äéêôýïõ:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Èá åðáíåêêéíÞóù ôçí óõóêåõÞ äéêôýïõ %s. Óõìöùíåßôå;"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Åêôüò êáé áí åßóôå óßãïõñïé üôé äåí åßíáé Ýôóé, ç óõíçèéóìÝíç åðéëïãÞ\n"
-#~ "åßíáé \"/dev/hda\" (ï ðñþôïò äßóêïò óôï ðñþôï êáíÜëé), Þ \"/dev/sda\n"
-#~ "(ï ðñþôïò SCSI äßóêïò)."
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "ÅðéëÝîôå ôïí åî' ïñéóìïý ÷ñÞóôç:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "ÄïêéìÜóôå ôï ðïíôßêé åäþ."
-
-#~ msgid "Press next to continue."
-#~ msgstr "ÐáôÞóôå åðüìåíï ãéá íá óõíå÷ßóåôå."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Ðáñáêáëþ åðéëÝîôå ãëþóóá ãéá åãêáôÜóôáóç êáé ÷ñÞóç."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "ÐñÝðåé íá áðïäå÷èåßôå ôïõò üñïõò ôçò Üäåéáò ÷ñÞóçò ðñéí óõíå÷ßóåôå ôçí "
-#~ "åãêáôÜóôáóç.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ðáñáêáëþ åðéëÝîôå \"Áðïäï÷Þ\" åÜí óõìöùíåßôå ìå ôïõò üñïõò.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ðáñáêáëþ åðéëÝîôå \"¶ñíçóç\" åÜí äåí óõìöùíåßôå. Ç åãêáôÜóôáóç èá "
-#~ "óôáìáôÞóåé ÷ùñßò íá\n"
-#~ "ðåéñá÷ôåß ôßðïôá."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "ÅðéëÝîôå ôçí äéáñýèìéóç ðïõ áíôéóôïé÷åß óôï ðëçêôñïëüãéü óáòáðü ôçí "
-#~ "ðáñáðÜíù ëßóôá"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "ÅÜí èÝëåôå êáé Üëëåò ãëþóóåò (åêôüò áðü áõôÞ ðïõ åðéëÝîáôå óôçí áñ÷Þ)\n"
-#~ "ðáñáêáëþ åðéëÝîôå ôéò áðü ôïí ðáñáðÜíù êáôÜëïãï."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "ÅðéëÝîôå:\n"
-#~ "\n"
-#~ "  - ÐñïóáñìïóìÝíç: ÅÜí åßóôå åîïéêåéùìÝíïò ìå ôï Linux, èá ìðïñÝóåôå íá \n"
-#~ "åðéëÝîåôå ìåôáîý óõóôÞìáôïò ãåíéêÞò ÷ñÞóçò, óõóôÞìáôïò áíÜðôõîçò Þ "
-#~ "åîõðçñåôçôÞ\n"
-#~ "äéêôýïõ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÅîåéäéêåõìÝíç: ÅÜí åßóôå ðïëý åîïéêåéùìÝíïò ìå óõóôÞìáôá GNU/Linux "
-#~ "êáé\n"
-#~ "èÝëåôå íá ðñáãìáôïðïéÞóåôå ìéá åîáéñåôéêÜ ðñïóáñìïóìÝíç åãêáôÜóôáóç, "
-#~ "ôüôå\n"
-#~ "áõôÞ ç åðéëïãÞ åßíáé ãéá óáò. Èá ìðïñÝóåôå íá åðéëÝîåôå ôýðï "
-#~ "åãêáôÜóôáóçò\n"
-#~ "üðùò êáé óôçí ðáñáðÜíù (\"ÐñïóáñìïóìÝíç\") åðéëïãÞ."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ïé åðéëïãÝò ðïõ Ý÷åôå ó÷åôéêÜ ìå ôçí ÷ñÞóç ôïõ óõóôÞìáôüò óáò \n"
-#~ "åßíáé ïé áêüëïõèåò:\n"
-#~ "\n"
-#~ "* Óôáèìüò åñãáóßáò: ÅðéëÝîôå áõôÞí åÜí óêïðåýåôå íá ÷ñçóéìïðïéçóåôå ôï "
-#~ "óýóôçìÜ\n"
-#~ "  óáò êõñßùò ãéá êáèçìåñéíÞ ÷ñÞóç, óôï óðßôé Þ óôï ãñáöåßï. \n"
-#~ "\n"
-#~ "* ÁíÜðôõîç: ÅðéëÝîôå áõôü åÜí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå ôï óýóôçìÜ "
-#~ "óáò\n"
-#~ "  êõñßùò ãéá áíÜðôõîç ëïãéóìéêïý. Èá åãêáôáóôáèåß ìéá ðëÞñçò óõëëïãÞ "
-#~ "åñãáëåßùí\n"
-#~ "  ãéá ìåôáãëþôéóç, áðïóöáëìÜôùóç êáé ìïñöïðïßçóç ðçãáßïõ êþäéêá, êáèþò "
-#~ "êáé\n"
-#~ "  äçìéïõñãßá ðáêÝôùí ëïãéóìéêïý.\n"
-#~ "\n"
-#~ "* ÅîõðçñåôçôÞò: ÅðéëÝîôå áõôü åÜí óêïðåýåôå íá ÷ñçóéìïðïéÞóåôå ôï óýóôçìÜ "
-#~ "óáò\n"
-#~ "  ùò åîõðçñåôçôÞ, åßôå áñ÷åßùí (NFS Þ SMB), åßôå åêôõðþóåùí (lp Þ SMB), "
-#~ "åßôå\n"
-#~ "  ðéóôïðïßçóçò (NIS), âÜóçò äåäïìÝíùí êëð. Óå áõôÞí ôçí ðåñßðôùóç, äåí "
-#~ "èá\n"
-#~ "  åãêáôáóôáèïýí ðñÜãìáôá üðùò ôï KDE, ôï Gnome êëð."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åðéëÝîåôå ôéò ïìÜäåò ðáêÝôùí ðïõ åðéèõìåßôå íá "
-#~ "åãêáôáóôÞóåôå Þ íá áíáâáèìßóåôå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôï DrakX èá ðñïóäéïñßóåé åÜí Ý÷åôå áñêåôü ÷þñï óôïí äßóêï óáò.\n"
-#~ "ÅÜí ü÷é, èá ëÜâåôå ìéá ðñïåéäïðïßçóç. ÅÜí èÝëåôå íá óõíå÷ßóåôå, èá "
-#~ "åãêáôáóôáèïýí\n"
-#~ "üëåò ïé åðéëåãìÝíåò ïìÜäåò, áëëÜ èá áöáéñåèïýí êÜðïéá ðáêÝôá åëÜóóïíïò "
-#~ "åíäéáöÝñïíôïò.\n"
-#~ "Óôï êÜôù ìÝñïò ôçò ëßóôáò ìðïñåßôå íá åðéëÝîåôå \"ÅðéëïãÞ áíåîÜñôçôùí "
-#~ "ðáêÝôùí\". Óå áõôÞ\n"
-#~ "ôç ðåñßðôùóç èá ðñÝðåé íá åðéëÝîåôå áíÜìåóá óå ðáñáðÜíù áðü 1000 ðáêÝôá."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åðéëÝîåôå áíåîÜñôçôá üëá ôá ðáêÝôá ðïõ åðéèõìåßôå \n"
-#~ "íá åãêáôáóôÞóåôå.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ìðïñåßôå íá áíáðôýîåôå Þ íá óõìðôýîåôå ôï äÝíôñï åðéëÝãïíôáò ôéò "
-#~ "åðéëïãÝò\n"
-#~ "óôçí áñéóôåñÞ ãùíßá ôïõ ðáñáèýñïõ ôùí ðáêÝôùí.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí ðñïôéìÜôå íá íá âëÝðåôå ôá ðáêÝôá ôáîéíïìçìÝíá áëöáâçôéêÜ, ðáôÞóôå\n"
-#~ "\"ÅíáëëáãÞ ïìáäïðïßçóçò\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí äåí èÝëåôå íá ëáìâÜíåôå ðñïåéäïðïéÞóåéò ãéá åîáñôÞóåéò, ðáôÞóôå\n"
-#~ "\"Áõôüìáôåò åîáñôÞóåéò\". Óçìåéþóôå üôé óå áõôÞí ôçí ðåñßðôùóç, ç \n"
-#~ "áðïåðéëïãÞ åíüò ðáêÝôïõ ìðïñåß íá ðñïêáëÝóåé ôçí óéùðçëÞ áðïåðéëïãÞ \n"
-#~ "êáé Üëëùí ðáêÝôùí ðïõ åîáñôþíôáé áðü áõôü."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "ÅÜí Ý÷åôå üëá ôá ðáñáðÜíù CDs, ðáôÞóôå Ok.\n"
-#~ "ÅÜí äåí Ý÷åôå êáíÝíá áðü ôá ðáñáðÜíù CDs, ðáôÞóôå Áêýñùóç.\n"
-#~ "ÅÜí äåí Ý÷åôå êÜðïéá áðü áõôÜ, áðïåðéëÝîôå ôá êáé ðáôÞóôå Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Ôþñá ìðïñåßôå íá äïêéìÜóåôå ôï ðïíôßêé óáò. ×ñçóéìïðïéÞóôå ôá êïõìðéÜ êáé "
-#~ "ôç ñïäÝëá ãéá íá\n"
-#~ "åðéâåâáéþóåôå ðùò ïé ñõèìßóåéò åßíáé óùóôÝò. Áí äåí åßíáé, ìðïñåßôå íá "
-#~ "êÜíåôå êëßê óôï \"¶êõñï\"\n"
-#~ "ãéá íá åðéëÝîåôå Ýíáí Üëëï ïäçãü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Åáí êÜíåôå åãêáôÜóôáóç óå Ýíá ìç÷Üíçìá Apple ìå ðïíôßêé åíüò êïõìðéïý, èá "
-#~ "óáò äïèåß ç\n"
-#~ "åõêáéñåßá íá ïñßóåôå êÜðïéá êïõìðéÜ ôïõ ðëçêôñïëïãßïõ þóôå íá åîïìïéþóåôå "
-#~ "ôï 2ï êáé ôï 3ï\n"
-#~ "êïõìðß ôïõ ðïíôéêéïý. Áõôü èá óáò åðéôñÝøåé íá Ý÷åôå ðñüóâáóç óôçí ðëÞñç "
-#~ "ëåéôïõñãéêüôçôá\n"
-#~ "ôïõ ðïíôéêéïý ôüóï óôçí êïíóüëá ôïõ Linux üóï êáé óôï X Window GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "Áí Ý÷åôå Ýíá ADB ðïíôßêé, ðáñáêáëþ åðéëÝîôå USB, êáèþò ï ðõñÞíáò ôïõ "
-#~ "Linux èá öñïíôßóåé\n"
-#~ "ãéá ôï ðïíôßêé óáò êáôÜëëçëá."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "ÅÜí èÝëåôå íá óõíäÝóåôå ôïí õðïëïãéóôÞ óáò óôï Äéáäßêôõï Þ óå Ýíá "
-#~ "ôïðéêü \n"
-#~ "äßêôõï, ðáñáêáëþ êÜíôå ôçí êáôÜëëçëç åðéëïãÞ, áöïý áíïßîåôå ôçí äéêôõáêÞ "
-#~ "óáò \n"
-#~ "óõóêåõÞ þóôå ôï DrakX íá ôçí åíôïðßóåé áõôüìáôá.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí äåí Ý÷åôå êáìßá äéêôõáêÞ óýíäåóç, åðéëÝîôå \"Áðåíåñãïðïßçóç äéêôýïõ"
-#~ "\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí èÝëåôå íá ñõèìßóåôå ôï äßêôõï áñãüôåñá, Þ áí ôåëåéþóáôå ìå ôéò \n"
-#~ "ñõèìßóåéò äéêôýïõ, åðéëÝîôå \"ÔÝëïò\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Äåí åíôïðßóôçêå modem. Ðáñáêáëþ åðéëÝîôå ôçí óåéñéáêÞ èýñá óôçí ïðïßá\n"
-#~ "åßíáé óõíäåäåìÝíï.\n"
-#~ "\n"
-#~ "\n"
-#~ "ÐëçñïöïñéáêÜ, ç ðñþôç èýñá (ðïõ ïíïìÜæåôáé \"COM1\" óôá Microsoft "
-#~ "Windows),\n"
-#~ "óôï Linux ïíïìÜæåôáé \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åðéëÝîåôå ôéò ñõèìßóåéò dial-up. ÅÜí äåí îÝñåôå Þ äåí "
-#~ "åßóôå\n"
-#~ "óßãïõñïò ãéá áõôÝò ôéò ñõèìßóåéò, ìðïñåßôå íá ôéò ðëçñïöïñçèåßôå áðü "
-#~ "ôïí \n"
-#~ "ðáñï÷Ýá óáò. ÅÜí äåí ïñßóåôå åîõðçñåôçôÞ ïíïìÜôùí (DNS), èá ïñéóôåß "
-#~ "áõôüìáôá \n"
-#~ "êáôÜ ôçí óýíäåóç."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "ÅÜí ôï modem óáò åßíáé åîùôåñéêü, ðáñáêáëþ áíïßîôå ôï þóôå ôï DrakX íá "
-#~ "ìðïñÝóåé íá ôï åíôïðßóåé áõôüìáôá."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Ðáñáêáëþ áíïßîôå ôï modem óáò êáé åðéëÝîôå ôï óùóôü."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åðéëÝîåôå ôéò ñõèìßóåéò dial-up. ÅÜí äåí îÝñåôå Þ äåí "
-#~ "åßóôå\n"
-#~ "óßãïõñïò ãéá áõôÝò ôéò ñõèìßóåéò, ìðïñåßôå íá ôéò ðëçñïöïñçèåßôå áðü "
-#~ "ôïí \n"
-#~ "ðáñï÷Ýá óáò. ÅÜí äåí ïñßóåôå åîõðçñåôçôÞ ïíïìÜôùí (DNS), èá ïñéóôåß "
-#~ "áõôüìáôá \n"
-#~ "êáôÜ ôçí óýíäåóç."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åéóÜãåôå ôï äéêôõáêü üíïìá (åÜí ÷ñåéÜæåôáé). ÅÜí äåí "
-#~ "åßóôå óßãïõñïò,\n"
-#~ "ìðïñåßôå íá æçôÞóåôå ðëçñïöïñßåò áðü ôïí ðáñï÷Ýá óáò."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá ñõèìßóåôå ôçí óõóêåõÞ äéêôýïõ.\n"
-#~ "\n"
-#~ "  - Äéåýèõíóç IP: ÅÜí äåí ôçí îÝñåôå, ñùôÞóôå ôïí õðåýèõíï äéêôýïõ Þ\n"
-#~ "ôïí ðáñï÷Ýá óáò.\n"
-#~ "Äåí ðñÝðåé íá åéóÜãåôå äéåýèõíóç IP åÜí åðéëÝîåôå \"Áõôüìáôç áðüäïóç IP"
-#~ "\"\n"
-#~ "ðáñáêÜôù.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÌÜóêá äéêôýïõ: \"255.255.255.0\" åßíáé óõíÞèùò êáëÞ åðéëïãÞ. ÅÜí äåí\n"
-#~ "åßóôå óßãïõñïò, ñùôÞóôå ôïí õðåýèõíï äéêôýïõ Þ ôïí ðáñï÷Ýá óáò.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Áõôüìáôç áðüäïóç IP: ÅÜí ôï äßêôõü óáò ÷ñçóéìïðïéåß Ýíá áðü ôá "
-#~ "ðñïôüêïëëá\n"
-#~ "BOOTP Þ DHCP, åðéëÝîôå áõôü. Óå áõôÞ ôçí ðåñßðôùóç, äåí ÷ñåéÜæåôáé íá "
-#~ "äþóåôå\n"
-#~ "äéåýèõíóç IP. ÅÜí äåí åßóôå óßãïõñïò, ñùôÞóôå ôïí õðåýèõíï äéêôýïõ Þ\n"
-#~ "ôïí ðáñï÷Ýá óáò."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åéóÜãåôå ôï äéêôõáêü óáò üíïìá. ÅÜí äåí\n"
-#~ "åßóôå óßãïõñïé, óõìâïõëåõèåßôå ôïí õðåýèõíï äéêôýïõ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åéóÜãåôå ôï äéêôõáêü óáò üíïìá. ÅÜí äåí\n"
-#~ "åßóôå óßãïõñïé, áöÞóôå ôï êåíü."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá åéóÜãåôå ôéò åðéëïãÝò ôïõ dialup. ÅÜí äåí åßóôå "
-#~ "óßãïõñïò,\n"
-#~ "ìðïñåßôå íá æçôÞóåôå ðëçñïöïñßåò áðü ôïí ðáñï÷Ýá óáò."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "ÅÜí ÷ñçóéìïðïéÞóåôå proxies, ðáñáêáëþ ñõèìßóôå ôïõò ôþñá. ÅÜí äåí "
-#~ "îÝñåôå,\n"
-#~ "ñùôÞóôå ôïí ðáñï÷Ýá óáò Þ ôïí õðåýèõíï äéêôýïõ."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Áí ç óýíäåóÞ óáò ìå ôï Äéáäßêôõï åßíáé óùóôÜ ñõèìéóìÝíç, ìðïñåßôå íá\n"
-#~ "åãêáôáóôÞóåôå ðáêÝôï êñõðôïãñáößáò. Ðñþôá åðéëÝîôå Ýíáí ôüðï áð'\n"
-#~ "üðïõ èá êáôåâÜóåôå ôá ðáêÝôá êáé ìåôÜ åðéëÝîôå ðïéÜ ðáêÝôá èá\n"
-#~ "åãêáôáóôÞóåôå.\n"
-#~ "\n"
-#~ "Óçìåéþóôå üôé ðñÝðåé íá åðéëÝîåôå ôüðï êáé ðáêÝôá óýìöùíá ìå ôçí\n"
-#~ "íïìïèåóßá óáò."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ìðïñåßôå ôþñá íá åðéëÝîåôå æþíç þñáò áíÜëïãá ìå ôçí ôïðïèåóßá óáò."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Ìðïñåßôå íá ïñßóåôå Ýíáí ôïðéêü åêôõðùôÞ (óõíäåäåìÝíï óôïí õðïëïãéóôÞ "
-#~ "óáò) \n"
-#~ "Þ Ýíáí áðïìåìáêñõóìÝíï (ðñïóâÜóéìï ìÝóù UNIX äéêôýïõ, Netware Þ äéêôýïõ \n"
-#~ "Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "ÅÜí èÝëåôå íá åêôõðþíåôå, åðéëÝîôå Ýíá óðü ôá äýï óõóôÞìáôá åêôýðùóçò \n"
-#~ "(CUPS êáé LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôï CUPS åßíáé Ýíá íÝï, äõíáôü êáé åõÝëéêôï óýóôçìá åêôýðùóçò ãéá UNIX \n"
-#~ "óõóôÞìáôá. ÁõôÞ åßíáé ç âáóéêÞ åðéëïãÞ ãéá ôï Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôï LPR åßíáé ôï ðáëéü êëáóóéêü óýóôçìá åêôýðùóçò.\n"
-#~ "\n"
-#~ "ÅÜí äåí Ý÷åôå óêôõðùôÞ, åðéëÝîôå \"ÊáíÝíá\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "Ôï GNU/Linux ìðïñåß íá óõíåñãáóôåß ìå äéÜöïñïõò ôýðïõò åêôõðùôþí. Ï "
-#~ "êáèÝíáò áðü\n"
-#~ "áõôïýò ÷ñåéÜæåôáé äéáöïñåôéêÝò ñõèìßóåéò.\n"
-#~ "\n"
-#~ "ÅÜí ï åêôõðùôÞò óáò åßíáé óõíäåäåìÝíïò óôï óýóôçìÜ óáò, åðéëÝîôå "
-#~ "\"Ôïðéêüò\n"
-#~ "ÅêôõðùôÞò\".\n"
-#~ "\n"
-#~ "ÅÜí èÝëåôå íá åêôõðþíåôå óå Ýíáí åêôõðùôÞ ôïðïèåôçìÝíï óå áðïìåìáêñõóìÝíï "
-#~ "UNIX\n"
-#~ "óýóôçìá, åðéëÝîôå \"ÁðïìåìáêñõóìÝíïò åêôõðùôÞò\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ÅÜí èÝëåôå íá åêôõðþíåôå óå Ýíáí åêôõðùôÞ ôïðïèåôçìÝíï óå áðïìåìáêñõóìÝíï "
-#~ "Windows\n"
-#~ "óýóôçìá (Þ UNIX ìå SMB ðñùôüêïëëï), åðéëÝîôå \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Ðáñáêáëþ áíÜøôå ôïí åêôõðùôÞ óáò ãéá íá ôï áíé÷íåýóåé ôï DrakX.\n"
-#~ "\n"
-#~ "ÐñÝðåé íá åéóÜãåôå êÜðïéåò ðëçñïöïñßåò åäþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "...* ¼íïìá åêôõðùôÞ: ï print spooler ÷ñçóéìïðïéåß ôï \"lp\"ùò ôï "
-#~ "ðñïêáèïñéóìÝíï üíïìá. Ïðüôå, ðñÝðåé íá Ý÷åôå Ýíáí åêôõðùôÞ ïíüìáôé \"lp"
-#~ "\".\n"
-#~ "     Åáí Ý÷åôå ìüíï Ýíáí åêôõðùôÞ, ìðïñåßôå íá ÷ñçóéìïðïéÞôå ðïëëÜ "
-#~ "ïíüìáôá ãéá áõôüí.Áðëþò èá ðñÝðåé íá ôá äéá÷ùñßóåôå ìå Ýíá pipe\n"
-#~ "     ÷áñáêôÞñá (Ýíá \"|\"). Ïðüôå, åáí ðñïôéìÜôå Ýíá ðïéï óçìáíôéêü "
-#~ "üíïìá, ðñÝðåé íá ôï âÜëåôå ðñþôï, ð.÷: \"My printer|lp\".\n"
-#~ "     Ï åêôõðùôÞò ðïõ Ý÷åé ôï \"lp\" óôá ïíüìáôÜ ôïõ èá åßíáé ï "
-#~ "ðñïêáèïñéóìÝíïò åêôõðùôÞò.\n"
-#~ "\n"
-#~ "\n"
-#~ "...* ÐåñéãñáöÞ: áõôü åßíáé ðñïáéñåôéêü áëëÜ ìðïñåß íá åßíáé ÷ñÞóéìï åáí "
-#~ "ðïëëïß åêôõðùôÝò åßíáé óõíäåäåìÝíïé óôïí õðïëïãéóôÞ óáò Þ áí åðéôñÝðåôå\n"
-#~ "     Üëëïõò õðïëïãéóôÝò íá Ý÷ïõí ðñüóâáóç óå áõôüí ôïí åêôõðùôÞ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ôïðïèåóßá: åáí èÝëåôå íá äþóåôå êÜðïéåò ðëçñïöïñßåò ó÷åôéêÜ ìå ôçí\n"
-#~ "     ôïðïèåóßá ôïõ åêôõðùôÞ óáò, âÜëôå ôéò åäþ (åßóôå åëåýèåñïò íá "
-#~ "ãñÜøåôå üôé\n"
-#~ "     èÝëåôå, ãéá ðáñÜäåéãìá \"2ïò üñïöïò\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "ÐñÝðåé íá åéóÜãåôå êÜðïéåò ðëçñïöïñßåò åäþ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¼íïìá ïõñÜò: ï print spooler ÷ñçóéìïðïéåß ôï \"lp\" ùò ôï "
-#~ "ðñïêáèïñéóìÝíï üíïìá åêôõðùôÞ. Ïðüôå, ðñÝðåé íá Ý÷åôå Ýíáí åêôõðùôÞ ìå ôï "
-#~ "üíïìá \"lp\".\n"
-#~ "     Åáí Ý÷åôå ìüíï Ýíáí åêôõðùôÞ, ìðïñåßôå íá ÷ñçóéìïðïéÞóåôå ðïëëÜ "
-#~ "ïíüìáôá ãéá áõôüí. ÁðëÜ ðñÝðåé íá ôá ÷ùñßóåôå ìå Ýíá pipe\n"
-#~ "     ÷áñáêôÞñá (Ýíá \"|\"). Ïðüôå, åáí ðñïôéìÜôå íá Ý÷åôå Ýíá ðéï "
-#~ "óçìáíôéêü üíïìá, ðñÝðåé íá ôï âÜëåôå ðñþôï, ð.÷: \"My printer|lp\".\n"
-#~ "     Ï åêôõðùôÞò ìå ôï \"lp\" óôá ïíüìáôÜ ôïõ èá åßíáé ï ðñïêáèïñéóìÝíïò "
-#~ "åêôõðùôÞò.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * ÊáôÜëïãïò Spool: áõôüò åßíáé ï êáôÜëïãïò ðïõ áðïèçêåýïíôáé ïé "
-#~ "åñãáóßåò ôïõ åêôõðùôÞ. ÄéáôçñÞóôå ôçí åî' ïñéóìïý åðéëïãÞ\n"
-#~ "     åáí äåí îÝñåôå ôß íá ÷ñçóéìïðïéÞóåôå\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Óýíäåóç ÅêôõðùôÞ: Åáí ï åêôõðùôÞò óáò åßíáé öõóéêþò óõíäåäåìÝíïò "
-#~ "óôïí õðïëïãéóôÞ óáò, åðéëÝîôå \"Ôïðéêüò åêôõðùôÞò\".\n"
-#~ "     Åáí èÝëåôå íá Ý÷åôå ðñüóâáóç óå Ýíáí åêôõðùôÞ ðïõ âñßóêåôáé óå Ýíá "
-#~ "áðïìáêñõóìÝíï Unix ìç÷Üíçìá, åðéëÝîôå \"ÁðïìáêñõóìÝíïò lpd åêôõðùôÞò\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Åáí èÝëåôå íá Ý÷åôå ðñüóâáóç óå Ýíáí åêôõðùôÞ ðïõ âñßóêåôáé óå Ýíá "
-#~ "áðïìáêñõóìÝíï Microsoft Windows ìç÷Üíçìá (Þ óå Ýíá Unix ìç÷Üíçìá ìå SMB\n"
-#~ "     ðñùôüêïëëï), åðéëÝîôå \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Åáí èÝëåôå íá Ý÷åôå ðñüóâáóç óå Ýíáí åêôõðùôÞ ðïõ âñßóêåôáé óå Ýíá "
-#~ "NetWare äßêôõï, åðéëÝîôå \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Äåí åíôïðßóôçêå åêôõðùôÞò. Ðáñáêáëþ åéóÜãåôå ôï üíïìá ôçò óõóêåõÞò óôçí\n"
-#~ " ïðïßá åßíáé óõíäåäåìÝíïò.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ïé ðåñéóóüôåñïé åêôõðùôÝò óõíäÝïíôáé óôçí ðñþôç ðáñÜëëçëç èýñá. ÁõôÞ "
-#~ "ïíïìÜæåôáé\n"
-#~ "\"/dev/lp0\" óôï GNU/Linux êáé \"LPT1\" óôá Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "ÅðéëÝîôå ôïí åêôõðùôÞ óáò óôïí ðáñáðÜíù êáôÜëïãï"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Ðáñáêáëþ åðéëÝîôå ôéò êáôÜëëçëåò ñõèìßóåéò ãéá ôïí åêôõðùôÞ óáò.\n"
-#~ "ÊïéôÜîôå ôçí ôåêìçñßùóç ôïõ åêôõðùôÞ åÜí äåí îÝñåôå ôé íá åðéëÝîåôå.\n"
-#~ "\n"
-#~ "\n"
-#~ "¸÷åôå ôçí äõíáôüôçôá íá åëÝãîåôå ôéò åðéëïãÝò óáò óôï åðüìåíï âÞìá êáé "
-#~ "íáôéò ôñïðïðïéÞóåôå áí äåí ëåéôïõñãïýí üðùò èá èÝëáôå."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá ïñßóåôå ôç ëÝîç-êëåéäß ãéá ôïí ÷ñÞóôç \"root\".\n"
-#~ "Ç ëÝîç ðñÝðåé íá åéóá÷èåß åéò äéðëïýí ãéá åðéâåâáßùóç.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ï root åßíáé ï äéá÷åéñéóôÞò ôïõ óõóôÞìáôïò êáé ï ìüíïò ðïõ Ý÷åé \n"
-#~ "ôï äéêáßùìá íá áëëÜîåé ôéò ñõèìßóåéò ôïõ óõóôÞìáôïò. Ãé áõôü, \n"
-#~ "åðéëÝîôå ðñïóåêôéêÜ áõôÞ ôç ëÝîç êëåéäß! Ìç åîïõóéïäïôçìÝíç \n"
-#~ "ðñüóâáóç óôï root ìðïñåß íá åßíáéåîáéñåôéêÜ åðéêßíäõíç ãéá \n"
-#~ "ôçí áêåñáéüôçôá ôïõ óõóôÞìáôïò êáé ôùí äåäïìÝíùí ôïõ, êáèþò \n"
-#~ "êáé ãéá Üëëá óõóôÞìáôá óõíäåäåìÝíá óå áõôü. \n"
-#~ "\n"
-#~ "\n"
-#~ "Ç ëÝîç êëåéäß ðñÝðåé íá åßíáé ìéá ìßîç áëöáñéèìçôéêþí ÷áñáêôÞñùí \n"
-#~ "êáé ìå ìÞêïò ôïõëÜ÷éóôïí ïêôþ (8) ÷áñáêôÞñùí. Äåí ðñÝðåé *ðïôÝ* \n"
-#~ "íá ôï ãñÜøåôå óå ÷áñôß."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Áí ôï äßêôõü óáò õðïóôçñßæåé LDAP (Þ NIS) ðñùôüêïëëï ãéá åîáêñßâùóç, "
-#~ "åðéëÝîôå\n"
-#~ "\"LDAP\" (Þ \"NIS\") ùò åîáêñßâùóç. Áí äåí ãíùñßæåôå, ñùôÞóôå ôïí "
-#~ "äéá÷åéñéóôÞ\n"
-#~ "äéêôýïõ óáò.\n"
-#~ "Áí ï õðïëïãéóôÞò óáò äåí åßíáé óõíäåäåìÝíïò óå äßêôõï ìå äéá÷åéñéóôÞ, "
-#~ "ôüôå ðéèáíüôáôá íá èÝëåôå íá\n"
-#~ "åðéëÝîåôå \"ÔïðéêÜ áñ÷åßá\" ãéá åîáêñßâùóç."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá äçìéïõñãÞóåôå Ýíáí Þ ðåñéóóüôåñïõò \"áðëïýò\" ÷ñÞóôåò,\n"
-#~ "(óå áíôßèåóç ìå ôïí \"åîïõóéïäïôçìÝíï\" ÷ñÞóôç, root). Ìðïñåßôå íá \n"
-#~ "äçìéïõñãÞóåôå Ýíáí Þ ðåñéóóüôåñïõò ÷ñÞóôåò ãéá êÜèå ðñüóùðï ðïõ èÝëåôå\n"
-#~ "íá Ý÷åé ðñüóâáóç óôï óýóôçìÜ óáò. Óçìåéþóôå üôé êÜèå ÷ñÞóôçò Ý÷åé ôéò\n"
-#~ "äéêÝò ôïõ ñõèìßóåéò (ãñáöéêü ðåñéâÜëëïí, ñõèìßóåéò åöáñìïãþí êëð),\n"
-#~ "êáèþò êáé ôï äéêü ôïõ \"home directory\", óôï ïðïßï áðïèçêåýïíôáé\n"
-#~ "áõôÝò ïé ñõèìßóåéò.\n"
-#~ "\n"
-#~ "\n"
-#~ "Êáô' áñ÷Þí, äçìéïõñãÞóôå Ýíáí ÷ñÞóôç ãéá ôïí åáõôü óáò! Áêüìá êáé åÜí\n"
-#~ "åßóôå ï ìïíáäéêüò ÷ñçóôçò ôïõ óõóôÞìáôïò, ÄÅÍ ðñÝðåé íá ÷ñçóéìïðïéåßôå\n"
-#~ "ôï root ãéá ôçí êáèçìåñéíÞ ÷ñÞóç ôïõ óõóôÞìáôïò, äéüôé áõôü èá \n"
-#~ "äçìéïõñãïýóå êéíäõíïõò. ¸íá áðëü ëÜèïò ðëçêôñïëüãçóçò åßíáé áñêåôü\n"
-#~ "ãéá íá êáôáóôñÝøåé ôçí åãêáôÜóôáóÞ óáò üôáí åñãÜæåóôå ùò root.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ãé áõôü, èá ðñÝðåé íá óõíäÝåóôå óôï óýóôçìÜ óáò ÷ñçóéìïðïéþíôáò Ýíáí\n"
-#~ "êùäéêü áðëïý ÷ñÞóôç êáé íá óõíäÝåóôå ùò root ìüíï ãéá åñãáóßåò äéïßêçóçò\n"
-#~ "êáé óõíôÞñçóçò ôïõ óõóôÞìáôïò."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Óõíßóôáôáé íá äçìéïõñãÞóåôå Ýíáí äßóêï åêêßíçóçò. ÅÜí äåí \n"
-#~ "ìðïñåßôå íá åêêéíÞóåôå ôïí õðïëïãéóôÞ óáò, åßíáé ï ìüíïò ôñüðïò \n"
-#~ "íá äéáóþóåôå ôï óýóôçìÜ óáò ÷ùñßò åðáíåãêáôÜóôáóç."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Ïé êýñéåò åðéëïãÝò ôïõ LILO êáé ôïõ grub åßíáé:\n"
-#~ "  - ÓõóêåõÞ åêêßíçóçò: Ïñßæåé ôï üíïìá ôçò óõóêåõÞò (ð.÷. ìéá \n"
-#~ "êáôÜôìçóç) ðïõ ðåñéÝ÷åé ôïí ôïìÝá åêêßíçóçò. Åêôüò êáé áí åßóôå\n"
-#~ "óßãïõñïé üôé åßíáé áëëéþò, åðéëÝîôå \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÊáèõóôÝñçóç ðñéí ôçí åêêßíçóç: Ïñßæåé ôá äÝêáôá ôïõ äåõôåñïëÝðôïõ\n"
-#~ "ðïõ ôï óýóôçìá èá ðåñéìÝíåé ðñéí åêêéíÞóåé ôï ðñþôï ëåéôïõñãéêü.\n"
-#~ "Áõôü åßíáé óõíÞèùò ÷ñÞóéìï óå óõóôÞìáôá ðïõ åêêéíïýí áðü ôïí äßóêï\n"
-#~ "áìÝóùò ìåôÜ ôçí åíåñãïðïßçóç ôïõ ðëçêôñïëïãßïõ. Äåí õðÜñ÷åé êáèõóôÝñçóç\n"
-#~ "åÜí ï áñéèìüò ðáñáëåéöèåß Þ åßíáé ìçäÝí.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÁíÜëõóç ïèüíçò: Áõôü ïñßæåé ôçí VGA áíÜëõóç êåéìÝíïõ ðïõ èá åðéëåãåß\n"
-#~ "êáôÜ ôçí åêêßíçóç. ÕðÜñ÷ïõí ïé ðáñáêÜôù åðéëïãÝò: \n"
-#~ "\n"
-#~ "    * normal: ÊáíïíéêÞ áíÜëõóç êåéìÝíïõ 80×25.\n"
-#~ "\n"
-#~ "    * <áñéèìüò>: ÷ñÞóç ôçò áíôßóôïé÷çò áíÜëõóçò êåéìÝíïõ.\n"
-#~ "\n"
-#~ "  - Êáèáñéóìüò \"/tmp\" óå êÜèå åêêßíçóç: åáí èÝëåôå íá óâÞíåôå üëá ôá "
-#~ "áñ÷åßá êáé ôïõ öáêÝëïõò\n"
-#~ "ðïõ åßíáé óôï \"/tmp\" üôáí îåêéíÜôå ôï óýóôçìÜ óáò, åíåñãïðïéÞóôå áõôÞí "
-#~ "ôçí åðéëïãÞ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÁêñéâÞò RAM áí ÷ñåéÜæåôáé: äõóôõ÷þò, äåí õðÜñ÷åé óôåñåüôõðç ìÝèïäïò "
-#~ "íá äþóåé ôï\n"
-#~ "BIOS ôïí áêñéâÞ áñéèìü RAM ôïõ õðïëïãéóôÞ óáò. Óáí óõíÝðåéá, ôï Linux "
-#~ "ßóùò\n"
-#~ "áðïôý÷åé íá áíé÷íåýóåé ôçí RAM óùóôÜ. Óå áõôÞí ôçí ðåñßðôùóç, ìðïñåßôå\n"
-#~ "íá ïñßóåôå ôïí óùóôü áñéèìü åäþ. Ðáñáêáëþ óçìåéþóôå ðùò ìéá äéáöïñÜ ôçò "
-#~ "ôÜîçò ôùí 2 Þ 4\n"
-#~ "MB ìåôáîý ôçò ìíÞìçò ðïõ áíé÷íåýôçêå êáé ôçò ðñáãìáôéêÞò RAM ôïõ "
-#~ "óõóôÞìáôüò óáò åßíáé êáíïíéêÞ."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "Ôï SILO åßíáé ðñüãñáììá åêêßíçóçò ãéá SPARC: Ìðïñåß íá åêêéíÞóåé \n"
-#~ "ôï GNU/Linux Þ ïðïéïäÞðïôå Üëëï ëåéôïõñãéêü õðÜñ÷åé óôï óýóôçìÜ óáò. "
-#~ "ÊáíïíéêÜ, \n"
-#~ "ôá åðéðëÝïí ëåéôïõñãéêÜ ðñïóäéïñßæïíôáé êáé ñõèìßæïíôáé óùóôÜ. ÅÜí áõôü "
-#~ "äåí \n"
-#~ "óõíÝâç, ìðïñåßôå íá ðñïóèÝóåôå åðéðëÝïí åðéëïãÝò óå áõôÞí ôçí ïèüíç. \n"
-#~ "ÐñïóÝîôå íá åðéëÝîåôå ôéò óùóôÝò ðáñáìÝôñïõò.\n"
-#~ "\n"
-#~ "Ìðïñåßôå åðßóçò íá áðïêëåßóåôå ôçí ðñüóâáóç óå Üëëá ëåéôïõñãéêÜ óõóôÞìáôá "
-#~ "áöáéñþíôáò\n"
-#~ "ôéò áíôßóôïé÷åò åðéëïãÝò. Óå áõôÞí üìùò ôçí ðåñßðôùóç, èá ÷ñåéáóôåßôå "
-#~ "äéóêÝôôá åêêßíçóçò\n"
-#~ "ãéá íá ôá ÷ñçóéìïðïéÞóåôå!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Ïé êýñéåò åðéëïãÝò ôïõ SILO åßíáé:\n"
-#~ "  - ÅãêáôÜóôáóç bootloader: Ïñßæåé ôï ðïý èÝëåôå íá åãêáôáóôáèïýí ïé "
-#~ "áðáñáßôçôåò\n"
-#~ "ãéá ôçí åêêßíçóç ôïõ GNU/Linux ðëçñïöïñßåò. Åêôüò êé áí îÝñåôå ôé áêñéâþò "
-#~ "êÜíåôå,\n"
-#~ "åðéëÝîôå \"Ðñþôïò ôïìÝáò ôïõ äßóêïõ (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÊáèõóôÝñçóç ðñéí ôçí åêêßíçóç: Ïñßæåé ôá äÝêáôá ôïõ äåõôåñïëÝðôïõ\n"
-#~ "ðïõ ôï óýóôçìá èá ðåñéìÝíåé ðñéí åêêéíÞóåé ôï ðñþôï ëåéôïõñãéêü.\n"
-#~ "Áõôü åßíáé óõíÞèùò ÷ñÞóéìï óå óõóôÞìáôá ðïõ åêêéíïýí áðü ôïí äßóêï\n"
-#~ "áìÝóùò ìåôÜ ôçí åíåñãïðïßçóç ôïõ ðëçêôñïëïãßïõ. Äåí õðÜñ÷åé êáèõóôÝñçóç\n"
-#~ "åÜí ï áñéèìüò ðáñáëåéöèåß Þ åßíáé ìçäÝí."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ôþñá ðñÝðåé íá ñõèìßóåôå ôï X Window System, ôï ïðïßï åßíáé ï \n"
-#~ "ðõñÞíáò ôïõ ãñáöéêïý ðåñéâÜëëïíôïò (GUI) ôïõ GNU/Linux. ÐñÝðåé íá\n"
-#~ "ñõèìßóåôå ôçí êÜñôá ãñáöéêþí êáé ôçí ïèüíç óáò. Ôï ìåãáëýôåñï\n"
-#~ "ìÝñïò ôçò äéáäéêáóßáò åßíáé áõôïìáôïðïéçìÝíï, ïðüôå ç óõìâïëÞ\n"
-#~ "óáò óõíßóôáôáé óôçí åðéâåâáßùóç êáé áðïäï÷Þ ôùí áõôïìÜôùí \n"
-#~ "ñõèìßóåùí :)\n"
-#~ "\n"
-#~ "\n"
-#~ "¼ôáí ïëïêëçñùèåß ç äéáäéêáóßá ñýèìéóçò, èá îåêéíÞóåé ôï\n"
-#~ "X Window óýóôçìá (åêôüò åÜí åóåßò áðïöáóßóåôå áëëéþò), ãéá\n"
-#~ "íá åëÝãîåôå åÜí ïé ñõèìßóåéò óáò éêáíïðïéïýí. ÅÜí ü÷é, \n"
-#~ "ìðïñåßôå íá åðéóôñÝøåôå åäþ êáé íá åðáíáëÜâåôå ôéò ñõèìßóåéò\n"
-#~ "üóåò öïñÝò ÷ñåéáóôåß."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "ÅÜí êÜôé äåí ðÜåé êáëÜ ìå ôéò ñõèìßóåéò ôùí ×, ÷ñçóéìïðïéåßóôå áõôÝò ôéò\n"
-#~ "åðéëïãÝò ãéá íá ñõèìßóåôå óùóôÜ ôï ãñáöéêü ðåñéâÜëëïí (X Window System)."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "ÅÜí ðñïôéìÜôå åêêßíçóç óå ãñáöéêü ðåñéâÜëëïí åðéëÝîôå \"Íáé\". Áëëéþò, \n"
-#~ "åðéëÝîôå \"¼÷é\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Ìðïñåßôå íá åðéëÝîåôå Ýíá åðßðåäï áóöÜëåéáò ãéá ôï óýóôçìÜ óáò. Ðáñáêáëþ "
-#~ "äéáâÜóôå ôï manual ãéá ðëÞñåéò\n"
-#~ "  ðëçñïöïñßåò. ÂáóéêÜ, áí äåí îÝñåôå ôß íá åðéëÝîåôå, êñáôÞóôå ôçò "
-#~ "ðñïêáèïñéóìÝíåò åðéëïãÝò.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ôï óýóôçìÜ óáò èá åðáíåêêéíÞóåé.\n"
-#~ "\n"
-#~ "ÌåôÜ ôçí åðáíåêêßíçóç, ôï íÝï óáò Mandrake Linux óýóôçìá èá îåêéíÞóåé\n"
-#~ "áõôüìáôá. ÅÜí èÝëåôå íá åêêéíÞóåôå Ýíá Üëëï õðÜñ÷ïí ëåéôïõñãéêü, "
-#~ "ðáñáêáëþ\n"
-#~ "äéáâÜóôå ôéò ó÷åôéêÝò ïäçãßåò."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "ÔóÝ÷éêï (ÐñïãñáììáôéóôÝò)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Óëïâáêßáò (ðñïãñáììáôéóôÝò)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "¼íïìá ôïõ ðñïößë ãéá äçìéïõñãßá:"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Åî' ïñéóìïý Runlevel"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "ÁðïèÞêåõóç /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Ìïñöïðïßçóç üëùí"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ÌåôÜ ôçí ìïñöïðïßçóç üëùí ôùí êáôáôìÞóåùí,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "üëá ôá äåäïìÝíá óå áõôÝò ôéò êáôáôìÞóåéò èá ÷áèïýí"
-
-#~ msgid "Reload"
-#~ msgstr "Åðáíáöüñôùóç"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "ÈÝëåôå íá äçìéïõñãÞóåôå ìéá äéóêÝôôá áõôüìáôçò åãêáôÜóôáóçò ãéá "
-#~ "êëùíïðïßçóç áõôÞò ôçò åãêáôÜóôáóçò;"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Ñõèìßóåéò ADSL"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "¼íïìá áðïìåìáêñõóìÝíçò ïõñÜò ëåßðåé!"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Åäþ ìðïñåßôå íá ïñßóåôå ìéá ãñáììÞ åíôïëþí óôçí ïðïßá ç äéåñãáóßá èá "
-#~ "äéáóùëçíþíåôáé áíôß íá óôÝëíåôáé êáôåõèåßáí óôïí åêôõðùôÞ."
-
-#~ msgid "Command line"
-#~ msgstr "ÃñáììÞ åíôïëþí"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Ìéá ãñáììÞ åíôïëþí ðñÝðåé íá åéóá÷èåß!"
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "ÅéóÜãåôå ôï üíïìá ôïõ åêôõðùôÞ êáé ó÷üëéá"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Ôá ðåñéå÷üìåíá ôïõ áñ÷åßïõ ñõèìßóåùí äåí ìðïñïýí íá ìåôáöñáóôïýí"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Ìç áíáãíùñßóéìï áñ÷åßï ñõèìßóåùí"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid "Disable network"
-#~ msgstr "Áðåíåñãïðïßçóç äéêôýïõ"
-
-#~ msgid "Enable network"
-#~ msgstr "Åíåñãïðïßçóç äéêôýïõ"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Åðßâëåøç Äéêôýïõ"
-
-#~ msgid "Profile "
-#~ msgstr "Ðñïößë "
-
-#~ msgid "Statistics"
-#~ msgstr "ÓôáôéóôéêÜ"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Ôá÷ýôçôá ÁðïóôïëÞò: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ôá÷ýôçôá ËÞøçò: "
-
-#~ msgid "Logs"
-#~ msgstr "Logs"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Óýíäåóç óôï äéáäßêôõï (internet)"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Áðïóýíäåóç áðü ôï äéáäßêôõï (internet)"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Áðïóýíäåóç áðü ôï äéáäßêôõï (internet) áðÝôõ÷å."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Áðïóýíäåóç áðü ôï äéáäßêôõï (internet) ïëïêëçñþèçêå"
-
-#~ msgid "Connection complete."
-#~ msgstr "Ç óýíäåóç ïëïêëçñþèçêå"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Ç óýíäåóç áðÝôõ÷å.\n"
-#~ "Åðéâåâáéþóôå ôéò ñõèìßóåéò óáò óôï ÊÝíôñï ÅëÝã÷ïõ Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "áðïóôÜëèçêáí: "
-
-#~ msgid "received: "
-#~ msgstr "åëÞöèçóáí: "
-
-#~ msgid "average"
-#~ msgstr "ìÝóïò üñïò"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ìðïñåßôå ôþñá íá äïêéìÜóåôå ôï ðïíôßêé óáò. ÄïêéìÜóôå ôá ðëÞêôñá êáé ôï\n"
-#~ "ñïäÜêé êáé âåâáéùèåßôå üôé üëá ëåéôïõñãïýí üðùò ðñÝðåé. Áí ü÷é, åðéëÝîôå\n"
-#~ "\"Áêýñùóç\" êáé åðéëÝîôå Üëëïí ïäçãü."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Óýíäåóç DSL (Þ ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "ÅðéëïãÞ"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Ìðïñåßôå íá äþóåôå êáôåõèåßáí ôï URI ãéá ðñüóâáóç óôïí åêôõðùôÞ ìÝóù CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Íáé, óôåßëå äïêéìáóôéêÞ óåëßäá ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Íáé, óôåßëå äïêéìáóôéêÞ óåëßäá PostScrip"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Íáé, óôåßëå êáé ôéò äýï äïêéìáóôéêÝò óåëßäåò"
-
-#~ msgid "Paper Size"
-#~ msgstr "ÌÝãåèïò ÷áñôéïý"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "ÁðïâïëÞ ÷áñôéïý ìå ôï ðÝñáò ôçò åêôýðùóçò;"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ÅðéëïãÝò ïäçãïý Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ÅðéëïãÝò âÜèïõò ÷ñþìáôïò"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Åêôýðùóç êåéìÝíïõ óáí PostScript;"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Äéüñèùóç êåéìÝíïõ-óêÜëáò;"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Áñéèìüò óåëßäùí áíÜ óåëßäåò åîüäïõ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "ÁñéóôåñÜ/äåîéÜ ðåñéèþñéá óå óôéãìÝò (1/72 ôçò ßíôóáò)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "ÐÜíù/êÜôù ðåñéèþñéá óå óôéãìÝò (1/72 ôçò ßíôóáò)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "ÅðéðëÝïí åðéëïãÝò GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "ÅðéðëÝïí åðéëïãÝò êåéìÝíïõ"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Áíôßóôñïöç óåéñÜ óåëßäùí;"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Ôñüðïò óýíäåóçò áðïìåìáêñõóìÝíïõ åêôõðùôÞ"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Ìå ôçí ÷ñÞóç åîõðçñåôçôÞ CUPS, äåí ÷ñåéÜæåôáé íá ñõèìßóåôå åêôõðùôÝò \n"
-#~ "åäþ. Ïé åêôõðùôÝò èá áíáãíùñéóôïýí áõôüìáôá. Áí Ý÷åôå áìöéâïëßá, "
-#~ "åðéëÝîôå\n"
-#~ "\"ÅîõðçñåôçôÞ CUPS\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "ÊÜèå åêôõðùôÞò  ÷ñåéÜæåôáé Ýíá üíïìá (ãéá ðáñÜäåéãìá lp). Ìðïñïýí åðßóçò "
-#~ "íá \n"
-#~ "ïñéóôïýí Üëëåò ðáñÜìåôñïé üðùò ðåñéãñáöÞ Þ ç ôïðïèåóßá. Ôé üíïìá íá \n"
-#~ "ïñßóù ãé áõôüí ôïí åêôõðùôÞ êáé ðþò åßíáé óõíäåäåìÝíïò ï åêôõðùôçò;"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "ÊÜèå ïõñÜ åêôõðùôÞ (óôçí ïðïßá óôÝëíïíôáé ïé åêôõðþóåéò) ÷ñåéÜæåôáé\n"
-#~ "Ýíá üíïìá (óõ÷íÜ lp) êáé Ýíáí êáôÜëïãï. Ôé üíïìá êáé êáôÜëïãï íá \n"
-#~ "ïñßóù ãé áõôÞí ôçí ïõñÜ åêôõðùôÞ êáé ðþò åßíáé óõíäåäåìÝíïò ï åêôõðùôçò;"
-
-#~ msgid "Name of queue"
-#~ msgstr "¼íïìá ïõñÜò"
-
-#~ msgid "Spool directory"
-#~ msgstr "ÊáôÜëïãïò"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
deleted file mode 100644
index 431df175c..000000000
--- a/perl-install/share/po/eo.po
+++ /dev/null
@@ -1,11770 +0,0 @@
-#
-# MESAØOJ DE DrakX
-# D. Dale Gulledge <dsplat@rochester.rr.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-02 22:36-0500\n"
-"Last-Translator: D. Dale Gulledge <dsplat@rochester.rr.com>\n"
-"Language-Team: Esperanto <eo@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-3\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Plur-ekrana konfigura¼o"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafika karto"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Elektu grafikan karton"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Elektu X servilon"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X servilo"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Elektu X servilon"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X servilo"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kiun konfiguron de XFree vi deziras havi?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s kun 3D aparata akcelado"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE ÆI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE ÆI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
-"KOMPUTILON.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree Konfigurado"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Elektu memorkapaciton de via grafika karto"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Elektu ekranon"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ekrano"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"La du gravegaj parametroj estas la vertikala refreþigrapido (vertical\n"
-"refresh rate) kiu estas la rapido por refreþigi la tutan ekranon, kaj\n"
-"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
-"la rapido por montri skanliniojn.\n"
-"\n"
-"Øi estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
-"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
-"difektus vian ekranon.  Se vi dubas, elektu zorgeman opcion."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontala sinkronrapido (horizontal sync rate)"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikala refreþigrapido (vertical refresh rate)"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafika karto ne jam konfigurita"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Vi ne jam elektas distingivojn"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Averto: provado de æi tiu grafika karto eble svenigos vian komputilon"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Provu konfigura¼on"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"penu þanøi iom da parametroj"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Eraro okazis:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Mi eliros post %d sekundoj"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Æu tio æi pravas?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Eraro okazis, penu þanøi iom da parametroj"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Distingivo"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Elektu distingivon kaj kolorprofundon"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafika karto: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 servilo: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Plu"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Jeso"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Spertula Modalo"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Montru tuton"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Distingivoj"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavara aranøo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Speco de muso: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musaparato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ekrano: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekrana vertikala refreþigrapido (vertical refresh rate): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Graifka memoro: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorprofuneco: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Distingivo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 servilo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 pelilo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparas X-Fenestran konfigura¼on"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Kion vi deziras fari?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Þanøu Ekranon"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Þanøu Grafika karto"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Þanøu Servilajn opciojn"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Þanøu distingivon"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Montru informon"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Provu denove"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Æesu"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Æu vi deziras teni la þanøojn?\n"
-"Nuna konfiguro estas:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X Fenestro æe komenco"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mi povas konfiguri vian komputilon tiel ke øi aýtomate lanæos X kiam øi\n"
-"ekfunkcias.  Æu vi deziras ke X aýtomate lanæos?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Bonvolu resaluti en %s-n por aktivigi la þanøojn."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Bonvole adiaýu kaj sekve uzu Kontrol-Alt-Retropaþo (Ctrl-Alt-Backspace)."
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 koloroj (8 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil koloroj (15 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil koloroj (16 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milionoj koloroj (24 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardoj koloroj (32 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB aý pli"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Normala VGA, 640x480 æe 60 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Supera VGA, 800x600 æe 56 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-"8514 kongrua karto, 1024x768 æe 87 hercoj (Hz) interplektita (neniu 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-"Supera VGA, 1024x768 æe 87 hercoj (Hz) interplektita, 800x600 æe 56 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Etendita Supera VGA, 800x600 æe 60 hercoj (Hz), 640x480 æe 72 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-"Neinterplektita Supera VGA, 1024x768 æe 60 hercoj (Hz), 640x480 æe 72 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Altfrekvenca Supera VGA, 1024x768 æe 70 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1024x768 æe 60 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1280x1024 æe 74 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1280x1024 æe 76 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ekrano kiu povas fari 1600x1200 æe 70 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ekrano kiu povas fari 1600x1200 æe 76 hercoj (Hz)"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Unua sektoro de starta subdisko"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Unu sektoro de drajvo (ÆefStartRikordo)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Instalado"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kie vi deziras instali la startþargilon?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Instalado"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Startþargilo æefaj opcioj"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Startþargilo por uzi"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Startþargila instalado"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Starta aparato"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne funkcias kun malnovaj BIOSoj)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakta"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakta"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Grafika reøimo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Prokrastoperiodo antaý starti defaýltan sistemon"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasvorto"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasvorto (denove)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limigu komandliniajn opciojn"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limigu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Purigu /tmp dum æiuj startadoj"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Ebligu multoblajn profilojn"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Donu kvanton de memoro en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Bonvole provu denove"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Defaýlta Mastruma Sistemo?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Jen la diversaj enskriboj.\n"
-"Vi povas aldoni pli aý þanøi la ekzistantajn."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Aldonu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Finata"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Þanøu"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kiun specon de enskribo vi deziras aldoni"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linukso"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Alia Mastruma Sistemo (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Alia Mastruma Sistemo (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Alia Mastruma Sistemo (Vindozo...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kerna bildo"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Radiko"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Alfiksu"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lega-skriba"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabelo"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Danøera"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etikedo"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Defaýlta"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-grandeco"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Forigu enskribon"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Malplena etikedo ne estas permesata"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Vi devas havi interþanøan subdiskon"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Æi tiu etikedo estas jam uzata"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovis %s %s interfacojn"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Æu vi havas alian?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Æu vi havas iun %s interfacon?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Jes"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Vidu hardvaran informon"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalas pelilon por %s karto %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kiun %s pelilon devus mi provi?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Iuokaze, la %s pelilo bezonas havi aldonan informon por øuste funkcii,\n"
-"kvankam øi normale funkcias bone sen la informo.  Æu vi deziras specifi\n"
-"aldonajn opciojn por øi aý permesi al la pelilo esplori vian komputilon\n"
-"por la informo øi bezonas?  Kelkfoje, esplori svenas komputilon, sed\n"
-"øi ne devus kaýzi difekton."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Aýtomate esploru"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specifu opciojn"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nun vi povas provizi øiajn opciojn al modulo %s.\n"
-"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
-"Ekzemple, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulaj opcioj:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Þargado de modulo %s malsukcesis.\n"
-"Æu vi deziras trovi denove kun aliaj parametroj?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(jam aldonis %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Æi tiu pasvorto estas tro simpla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Bonvole donu salutnomon"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Æi tiu salutnomo estas jam aldonita"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Aldonu uzanto"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Enigu uzanton\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Akceptu uzanto"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Vera nomo"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Salutnomo"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Þelo"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Piktogramo"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Aýtomata-enregistrado"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mi povas konfiguri vian komputilon por aýtomate enregistri unu uzulon kiam\n"
-"øi startas.  Se vi ne deziras uzi æi tion, alklaku la `Nuligu' butonon."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Elektu la defaýltan uzulon:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Elektu la fenestro-administrilon por lanæi:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaý la instalado"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Æiuj"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Aldonu uzulon"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Akomodata"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS startas"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Æi tiu paka¼o devus esti promociata.\n"
-"Æu vi certas ke vi deziras malelekti øin?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Nuligu"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bonvenon Al Rompistoj"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Malbona"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Laýnorma"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoja"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"vi devus uzi æi tiun nivelon zorge. Øi faras vian komputilon pli facila\n"
-"por uzi, sed delikatega: vi devus neniam uzi øi surrete.\n"
-"Øi ne havas pasvortojn."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankoraý\n"
-"ne rekomendita."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Æi tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
-"por konekti al la Interreto kiel kliento.  Nun estas sekurecaj kontroloj."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Kun æi tiu sekurnivelo, uzado de æi tiu komputilo kiel servilo ebliøas.\n"
-"La sekureco nun estas sufiæe alta por uzi la sistemon kiel servilo kiu\n"
-"akceptas konektojn de multaj klientoj."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
-"malfermita.  Sekurecaj aspektoj estas æe iliaj maksimumoj."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Elektu sekurnivelon?"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Elektas sekurnivelon"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bonvenon al %s, la mastruma sistema elektilo!\n"
-"\n"
-"Elektu mastruman sistemon de la supra listo aý\n"
-"atendu dum %d sekundoj por defaýlta starto.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
-"redakti la"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "mankas sufiæe da spaco en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kie vi deziras instali la startþargilon?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Dosiero"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Dosiero/_Eliru"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>E"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NovStila Ekrano"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicia Ekrano"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicia Gtk+ Ekrano"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modalo"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modalo"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguru"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistema modalo"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Jes"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutoj"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundoj"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaý la instalado"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Franca"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Germana"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Greka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norvega"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sveda"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Itala"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Bonvolu fari rezervan kopion de via dateno antaýe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Legu zorge"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
-"sufiæas)\n"
-"æe la komenco de la disko"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Eraro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Soræisto"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Elektu agon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vi havas unu grandan FAT subdiskon.\n"
-"(øenerale uzata de MicroSoft DOS/Vindozo).\n"
-"Mi sugestas ke vi unue regrandecigi tiun subdiskon\n"
-"(klaku sur øin, kaj poste klaku sur \"Regrandecigu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaloj"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "Dosierlokigtabelo (FAT)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "muntado malsukcesis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Interþanøa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Malplena"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Alia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Specoj de dosiersistemoj:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Kreu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uzu ``%s'' anstataýe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Forigu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Uzu ``Malmuntu'' antaýe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi þanøas la specon de subdisko %s, æiuj datenoj en æi tiu subdisko "
-"estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Elektu agon"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Kreu novan subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Þanøu al Spertula reøimo"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Þanøu al Normala reøimo"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Malfaru"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Æu mi devus daýri malgraýe?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Æu eliru sen konservi"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Æu eliru sen skribi la subdisktabelon?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Aýtomate disponigu"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Forviþu æion"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Æiuj el la subdiskoj estas uzata"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
-"subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skribu subdiskotabelon"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Aýtomata muntado de demetebla medio"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Elektu dosieron"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La rezerva subdisktabelo ne estas la sama grandeco\n"
-"Æu daýras tamen?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Averto"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Enþovu disketon en drajvo\n"
-"Æiuj datenoj sur tiu disketo estos perdata"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Provas savi subdisktabelon"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Montru informon"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Surmetingo"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcioj"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Regrandecigu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Movu"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatu"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Muntu"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Malmuntu"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Þanøu RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Uzu por retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Kreu novan subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Komenca sektoro: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grandeco en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Surmetingo: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Prefero: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Þanøu subdiskspecon"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kiun dosierosistemo vi deziras uzi?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kie vi deziras munti retrokonektan dosieron %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kie vi deziras munti aparato %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne povas malfiksi surmetingon æar æi tiu subdisko estas uzata por\n"
-"retrokonektado.  Unue forigu la retrokonektadon."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Kalkulas FAT dosiersistemajn limojn"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Regrandecigas"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Æi tiu subdisko ne estas regrandecigebla"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Æiuj datenoj en æi tiu subdisko devus esti rezervata"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi regrandecigas subdiskon %s, æiuj datenoj en æi tiu subdisko estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Elektu la novan grandecon"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Grandeco en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Al kiu disko vi deziras movi?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektoro"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Al kiu sektoro vi deziras movi?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Movante"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Movas subdisko..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nova"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr ""
-"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
-"aldoni al"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Vi ne povas uzi æi tiun subdiskon por retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Retrokonekta dosieronomo: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Vera nomo"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Alia retrokonektado jam uzas tiun dosieron, elektu alian"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Dosiero jam ekzistas.  Æu vi deziras uzi øin?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Modulaj opcioj:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "aparato"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivelo"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "grandeco de pecoj"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Zorgu: æi tiu operacio estas danøera."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kiun specon de subdiskado?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Bedaýrinde mi ne kreas /boot tiom longe sur la drajvon (æe cilindro > "
-"1024).\n"
-"Aý vi uzos LILO kaj øi ne funkcios, aý vi ne uzos LILO kaj vi ne bezonas\n"
-"/boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La subdiskon vi elektis por aldoni kiel la radiko (root, /) estas fizike\n"
-"situanta preter la 1024a cilindro de la drajvo, kaj vi ne havas /boot\n"
-"subdiskon.  Se vi intencas uzi la LILO startadministranto, zorgu aldoni\n"
-"/boot subdiskon."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
-"Neniu startþargilo povas trakti tiun sen /boot subdisko.\n"
-"Do zorgu aldoni /boot subdiskon."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Vi bezonos restarti antaý ol la þanøo povas efektiviøi"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi formatas la subdiskon %s, æiuj datenoj en æi tiu subdisko estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatas"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatas subdiskon %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid malsukcesis"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Mankas sufiæan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Mankas sufiæan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Distingivo: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Aparato: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Speco: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nomo: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Komenco: sektoro %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeco: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoroj"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "De cilindro %d al cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ne formatita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Retrokonekta(j) dosiero(j): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Subdisko startata defaýlte\n"
-"    (por MS-DOS starto, ne por \"lilo\")\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivelo %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Grandeco de pecoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Retrokonekta dosieronomo: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeco: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informo: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Subdiskotabelospeco: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "æe buso %d identiga¼o %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcioj: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Æi tiu pasvorto ests tro simpla (øi devas esti almenaý %d signoj longa)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Þanøu subdiskspecon"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNA servilo"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatado de %s malsukcesis"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne scias kiel formati %s kiel speco %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eraro dum malmunti %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpla"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servilo"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Surmetingoj devas komenci kun antaýa /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jam estas subdisko kun surmetingo æe %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Æi tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Mankas sufiæan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eraro dum malfermado de %s por skribi: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
-"novajn dosiersistemojn.  Bonvolu kontroli vian ekipa¼on por la kaýzo de æi "
-"tiu problemo."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Vi ne havas iujn ajn subdiskojn!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nun vi povas elekti kiujn servojn vi deziras starti kiam vi startas\n"
-"vian komputilon.  Kiam via muso estas supre de ero, malgranda balono\n"
-"ekaperas por helpi vin.  Øi priskribas la rolon de la servo.\n"
-"\n"
-"Zorgegu en æi tiu paþo se vi intencas uzi vian komputilon kiel servilo:\n"
-"ne startu servojn kiujn vi ne deziras uzi."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Bonvolu elekti la øustan pordon.  Ekzemple, la COM1-a\n"
-"pordo sub MS Vindozo estas nomata ttyS0 sub GNU/Linukso."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (la Linuksa Þargilo) kaj Grub estas startþargiloj: ili povas starti\n"
-"aý GNU/Linukson aý iun ajn mastruman sistemon æeestanta æe via komputilo.\n"
-"Normale, æi tiuj aliaj mastrumaj sistemoj estas øuste detektata kaj\n"
-"instalada.  Se tiel ne estas, vi povas aldoni enskribon mane per æi tiu\n"
-"ekrano.  Zorgu elekti la øustajn parametrojn.\n"
-"\n"
-"\n"
-"Eble vi ankaý ne deziras doni atingon al æi tiuj aliaj mastrumaj sistemoj\n"
-"al iu ajn.  Æiokaze vi povas forstreki la respondajn enskribojn.  Sed\n"
-"æiokaze, vi bezonos startdiskon por starti ilin!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vi bezonas indiki kie vi deziras meti la informon postulata\n"
-"por starti GNU/Linukson.\n"
-"\n"
-"\n"
-"Krom se vi scias precize kion vi faras, elektu \"Unua sektoro de\n"
-"drajvo (MBR)\""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX provos seræi PCI-a(j)n SCSI-a(j)n adaptilo(j)n\n"
-"Se DrakX trovas SCSI-an adaptilon kaj scias kiun pelilon øi devas uzi\n"
-"øi aýtomate instalos øin (aý ilin).\n"
-"\n"
-"Se vi havas neniom da SCSI-aj adaptiloj, ISA-an SCSI-an adapilon, aý\n"
-"PCI-an SCSI-an adaptilon kiun DrakX ne rekonas DrakX demandos al vi\n"
-"se vi havas SCSI-an adaptilon sur via komputilo.  Se vi ne havas adaptilon\n"
-"vi povas nur klaki 'Ne'.  Se vi klakos 'Jes', DrakX montros al vi liston de\n"
-"peliloj.  Vi povos elekti vian specifan pelilon de la listo.\n"
-"\n"
-"\n"
-"Se vi devas permane elekti vian adaptilon, DrakX demandos\n"
-"æu vi deziras specifi opciojn por øi.  Vi devus permesi al DrakX\n"
-"esplori la aparaton por la opcioj.  Æi tiu kutime bone funkcias.\n"
-"\n"
-"Se ne, vi bezonos provizi opciojn al la pelilo.\n"
-"Reviziu la Instalgvidlibron por sugestoj pri ekstrakado de æi tiu\n"
-"informo de Vindozo (se vi havas øin sur via komputilo),\n"
-"de dokumenta¼o de aparato, aý de la TTT-ejo de la fabrikanto\n"
-"(se vi havas atingon al la reto)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Enþovu disketon en drajvo %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Eraro legante dosiero %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
-"funkcii.\n"
-"Vi povas trovi iun informon pri ili æe: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vi devas havi radikan subdiskon.\n"
-"Por æi tiu, kreu subdiskon (aý klaku estantan).\n"
-"Sekve elektu la agon \"Surmetingo\" kaj faru øin '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Vi devas havi interþanøan subdiskon"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vi ne havas interþanøan subdiskon\n"
-"\n"
-"Æu vi deziras daýri tamen?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vi devas havi interþanøan subdiskon"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Uzu liberan spacon"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Mankas sufiæan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ne ekzistas subdiskojn por uzi"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Uzu la Vindoza subdiskon por retrokonektado"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kiun subdiskon vi deziras uzi por meti Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Elektu la grandecojn"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Radikosubdiska grandeco en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Interþanøa subdiska grandeco en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kiun subdiskon vi deziras regrandecigi?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
-"vian subdiskon, la sekvanta eraro okazis: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' antaýe"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AVERTO!\n"
-"\n"
-"DrakX nun regrandecigas vian Vindozan subdiskon.  Zorgu: æi tiu operacio "
-"estas\n"
-"danøera.  Se vi ne jam faris øin, vi devus antaýe eliru el la instalado, "
-"uzi\n"
-"\"scandisk\" sub Vindozo (kaj laývole \"defrag\"), kaj sekve relanæu la\n"
-"instaladon.  Ankaý vi devus fari rezervan kopion de via dateno.\n"
-"Kiam vi estas certa, klaku \"Jeso\"."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kiun grandecon vi deziras teni por Vindozo?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "subdisko: %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Regrandeciøo de FAT malsukcesis: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne ekzistas FAT-ajn (Dosiero-Atingo-Tablo) subdiskojn por regrandecigi\n"
-"aý uzi kiel retrokonektaj subdiskoj (aý ne estas sufiæa da spaco)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Forviþu la tutan diskon"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Forigu Vindozon"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Æiuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Uzu fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nun vi povas dispartigi %s.\n"
-"Kiam vi finiøos, ne forgesu savi kun `w'."
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "La Dispartigsoræilo de DrakX trovis æi tiujn solvojn:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dispartigado malsukcesis: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Startado de la reto"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Haltas de la reto"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Eraro okazis, sed mi ne scias kiel trakti øin bone.\n"
-"Daýri je via propra risko."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Iuj gravaj paka¼oj ne estis taýge instalata.\n"
-"Aý via KDROM drajvo aý via KDROM disko estas difektita.\n"
-"Kontrolu la KDROM sur instalata komputilo per\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bonvenon al %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Neniu disketilo havebla"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Eniras paþon `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Via sistemo havas malmulte da risurcoj.  Eble vi havos problemojn pri\n"
-"instali Linuks-Mandrejkon.  Se tio okazos, vi povos anstataý provi tekstan\n"
-"instaladon.  Por æi tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
-"tajpu `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalklaso"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Bonvole, elektu unu el la sekvantaj specoj de instalado:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "La totala grandeco de la grupoj vi elektis estas proksimume %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se vi volas instali malpli ol æi tiu grandeco,\n"
-"elektu la procenton el la paka¼oj kiuj vi deziras instali.\n"
-"\n"
-"Malalta procento instalos nur la plej gravajn paka¼ojn;\n"
-"100%% instalos æiujn paka¼ojn."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Vi havas spacon æe via disko por nur %d%% da æi tiuj paka¼oj.\n"
-"\n"
-"Se vi deziras instali malpli ol tiom,\n"
-"elektu la procenton el la paka¼oj kiun vi deziras instali.\n"
-"Malalta procento instalos nur la plej gravajn paka¼ojn;\n"
-"%d%% instalos tiom paka¼ojn kiom eblajn."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vi povos elekti ilin pli precize en la sekvanta paþo."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procento da paka¼oj por instali"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Elektado de Paka¼aj Grupoj"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Elektado de individuaj paka¼oj"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tuta grandeco: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Malbona paka¼o"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nomo: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grandeco: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Graveco: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Vi ne povas elekti æi tiun paka¼on æar ne estas sufiæe da spaco por instali\n"
-"øin."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "La sekvaj paka¼oj estos instalataj"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "La sekvaj paka¼oj estos malinstalataj"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Vi ne povas elektu/malelektu æi tiun paka¼on"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Æi tiu estas deviga paka¼o, vi ne povas malelekti øin"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vi ne povas malelekti æi tiun paka¼on.  Øi estas jam instalita."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Æi tiu paka¼o devus esti promociata.\n"
-"Æu vi certas ke vi deziras malelekti øin?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Vi ne povas malelekti æi tiun paka¼on.  Øi devus esti promociata."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalu"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Þargu/Konservu sur disketo"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Elektado de individuaj paka¼oj"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eliru instalprogramon"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Elektu la paka¼ojn kiuj vi deziras instali"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalanta"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Taksas"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restanta "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Preparas instaladon"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paka¼oj"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalanta paka¼o %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akceptu"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Malakceptu"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Þanøu vian KDROM!\n"
-"\n"
-"Bonvole, enþovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas øin, klaku \"Nuligu\" por eviti la instaladon de æi tiu KDROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Æu vi deziras daýri tamen?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Estis eraro ordigi paka¼ojn:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Estis eraro dum instalado de paka¼oj:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Eraro okazis"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licenca kontrakto"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klavaro"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aranøon."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kiun instalklaso deziras vi?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalu/Øisdatigu"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Æu tiu æi estas instalado aý øisdatigado?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Rekomendata"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Spertulo"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Øisdatigu"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Elektado de individuaj paka¼oj"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muspordo"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguras PCMCIA kartojn..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfiguras IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "neniuj haveblaj subdiskoj"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Elektu surmetingojn"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon, øi estas tro difektita por mi :(\n"
-"Mi povas peni daýri per blankigi difektitajn subdiskojn (ÆIOM DA DATUMO\n"
-"pereos!).  La alia solvo estas malpermesi al DrakX þanøi la subdisktabelon.\n"
-"(la eraro estas %s)\n"
-"\n"
-"Æu vi konsentas perdi æiujn subdiskojn?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake malsukcesis øuste legi la subdisktabelon.\n"
-"Daýri je via propra risko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Radikosubdisko"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kiu estas la radikosubdisko (/) æe via sistemo?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vi bezonas restarti por la þanøoj al la subdisktabelo efektivigi"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Æu kontrolas malbonajn blokojn?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatas subdiskojn"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreas kaj formatas dosieron %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nesufiæa interþanøospaco por plenumi instalado, bonvolu aldoni iom"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Seræas haveblajn paka¼ojn"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Trovadas paka¼ojn por promocii"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Via komputilo ne havas sufiæe da spaco por instalado aý promocio (%d > %d)."
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompleta (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimuma (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekomendata (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Þargu de disketo"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Þargas de disketo"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Elektado de Paka¼oj"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Enþovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Konservu sur disketo"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se vi havas æiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-"Se vi havas neniujn de æi tiuj KDROM-oj, klaku \"Nuligu\".\n"
-"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
-"\"."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "KDROM etikedata \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparas instaladon"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalas paka¼o %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Enþovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Enþovu malplenan disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nun vi havas la þancon elþuti softvaron por æifrado.\n"
-"\n"
-"AVERTO:\n"
-"\n"
-"Pro malsamaj øeneralaj kondiæoj aplikeblaj al æi tiu softvaro kaj trudata\n"
-"de diversaj jurisdikcioj, la kliento kaj/aý fina uzanto de tiu softvaro\n"
-"devus certigi ke la leøoj de lia/ilia jurisdikcio permesas li/ili elþuti,\n"
-"stoki kaj/aý uzi tiun softvaron.\n"
-"\n"
-"Plue, la kliento kaj/aý fina uzanto scios specife atentos ne malobei la\n"
-"leøojn de lia/ilia jurisdikcio.  Se la kliento kaj/aý la fina uzanto\n"
-"malobeas tiujn aplikeblajn leøojn, li/ili altiros sur sin gravajn "
-"sankciojn.\n"
-"\n"
-"Neniuokaze aý Mandrakesoft aý øiaj fabrikistoj responsigos por specialaj,\n"
-"nerektaj aý hazardaj reparacioj kiuj ajn (inkluzive, sed ne limigite al\n"
-"perdo de profitoj, interrompo de komerco, perdo de komerca dateno kaj\n"
-"aliaj monaj malprofitoj, kaj rezultaj þuldoj kaj indemizo pagenda konforme\n"
-"al prijuøo) rezulte el uzado, posedado, aý sole elþutado de tiu softvaro, "
-"al\n"
-"kiu la kliento kaj/aý fina uzanto ne povis atingi post subskribi la nunan\n"
-"kontrakton.\n"
-"\n"
-"Por iuj demandoj rilate al tiu kontrakto, bonvole demandu de\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Kontaktu la spegulon por havigi la liston de havebla paka¼oj"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elektu spegulon de kiu havigi la paka¼ojn"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktu la spegulon por havigi la liston de havebla paka¼oj"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "kio estas vian horzonon?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Æu via hardvara horloøo estas øustigata en GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Neniu printilo"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Æu vi havas alian?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Muso"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printilo"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-karto"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Sonkarto"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokaj dosieroj"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Difinu pasvorton de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Neniu pasvorto"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Æi tiu pasvorto ests tro simpla (øi devas esti almenaý %d signoj longa)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Aýtentikigado"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Aýtentikiga LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Aýtentikiga NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domajno"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala startþargilo.  Æi tiu estas utila se vi ne deziras\n"
-"instali SILO sur via sistemo, aý alia mastruma sistemo forigas SILO,\n"
-"aý SILO ne funkcias kun via aparato-konfigura¼o.  Akomodita startdisketo "
-"ankaý\n"
-"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniøi de\n"
-"severaj sistemaj paneoj.\n"
-"\n"
-"Se vi deziras krei startdisketon por via sistemo, enþovu disketon en la\n"
-"unua drajvo kaj klaku \"JES\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Unua disketa drajvo"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Dua disketa drajvo"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ellasu"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala startþargilo.  Æi tiu estas utila se vi ne deziras\n"
-"instali LILO (aý grub) sur via sistemo, aý alia mastruma sistemo forigas "
-"LILO,\n"
-"aý LILO ne funkcias kun via komputilo.  Akomodita startdisketo ankaý povas\n"
-"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniøi de severaj\n"
-"sistemaj paneoj.  Æu vi deziras krei startdisketo por via sistemo?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Bedaýrinde, neniu disketdrajvo havebla"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Enþovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Kreas startdisketon"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparas startþargilon"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Æu vi deziras uzi aboot-on?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eraro daýre mi instalis \"aboot\",\n"
-"Æu mi devus provi perforte instali eæ se tio detruas la unuan subdiskon?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalu restart-þargilon"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalado de startþargilo malsukcesis.  La sekvanta eraro okazis:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Enþovu malplenan disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Kreas aýtoinstalan disketon"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Kreu aýtoinstalan disketon"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Aýtomata"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reludu"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Elektado de individuaj paka¼oj"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrejka Instalado %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mankas"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Elektu agon"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Bonvole atendu"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informo"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Etendu Arbon"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Maletendu Arbon"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Þanøu inter ebena kaj ordigita je grupoj"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Malbona elekta¼o, provu denove\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Via elekta¼o? (defaýlo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Via elekta¼o? (defaýlo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcioj: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Æu vi deziras uzi aboot-on?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Via elekta¼o? (defaýlo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Æe¶a (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Germana"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak-a"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Hispana"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finna"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franca"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvega"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusa"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sveda"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Unuiøinta Regna klavaro"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Usona klavaro"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albana"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armena (malnova)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armena (skribmaþina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbajøana (latina)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgara"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazila (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusa"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svisa (germana aranøo)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svisa (franca aranøo)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Æe¶a (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Germana (neniom da mortaj klavoj)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dana"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak-a (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-a (Norvega)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak-a (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estona"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Kartvela (\"Rusa\" aranøo)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Kartvela (\"Latina\" aranøo)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hungara"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israela"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israela (fonetika)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Irana"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islanda"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itala"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japana 106 klavoj"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea klavaro"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinamerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litova AZERTY-a (malnova)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litova AZERTY-a (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litova \"numero-vica\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litova \"fonetika\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Loko"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedona"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nederlanda"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pola (qwerty aranøo)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pola (qwertz aranøo)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugala"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Kebeka)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumana (qwertz-a)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumana (qwerty-a)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusa (Yawerty-a)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovena"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbajøana (cirila)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabelo"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Taja klavaro"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Taja klavaro"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turka (tradicia \"F\" modelo)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turka (moderna \"Q\" modelo)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajna"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Usona klavaro (internacia)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnama \"numero-vica\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslava (latina/cirila)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirklaj surmetingoj %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Muso"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Loøiteka MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Nespecifa PS2 RadoMuso"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 butona"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Nespecifa 2 Butona Muso"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Genera"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rado"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seria"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Nespecifa 3 Butona Muso"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Mikrosofta IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Loøiteka MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Loøiteka CC serio"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Loøiteka MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serio"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Loøiteka Muso (seria, malnova C7 speco)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "Neniu Muso"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 butonoj"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 butonoj"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "neniu"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Neniu Muso"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Bonvole, provu la muson"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Bonvole, provu la muson"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVU VIAN RADON!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sekvanta ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Antaýa"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Æu tio æi pravas?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektu al la Interreto"
-
-#: ../../network/adsl.pm_.c:20
-#, fuzzy
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La plej ofte uzata maniero por konekti kun ADSL estas dhcp + pppoe.\n"
-"Tamen, ekzistas konektojn kiuj nur uzas dhcp.\n"
-"Se vi ne scias, elektu 'uzu pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "uzu dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "uzu pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "uzu pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kiun dhcp-an klienton vi deziras uzi?\n"
-"La defaýlto estas dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-#, fuzzy
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lanæu la\n"
-"aparatokonfigurilon."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Elektu la retan interfacon"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "neniu retkarto trovita"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfiguras reto"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Bonvole enigu vian poþtejon se vi scias øin.\n"
-"Iuj DHCP-aj serviloj bezonas poþtejon por funkcii.\n"
-"Via poþtejo devus esti plene specifita poþtejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Poþtejo"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "ISDN-a Konfigura¼on"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Interna ISDN-karto"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN-karto"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kia estas via ISDN-a konekta¼o?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Konfigura¼o de barilo detektata!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigura¼o de barilo detektata!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-a Konfigura¼on"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Elektu vian interretprovizanton.\n"
-" Se øin ne estas en la listo, elektu Nelistiøitan"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokolo"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eýropo (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "La cetero de la mondo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"La cetero de la mondo \n"
-" neniom da D-Kanelo (lukontraktataj lineoj)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Kiun protokolon vi deziras uzi?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kiun specon de karto vi havas?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Mi ne scias"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
-"øusta.\n"
-"\n"
-"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
-"por via karto.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Æesigu"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Æu mi devus daýri?"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kiu estas via ISDN-a karto?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon.  Bonvole "
-"elektu\n"
-"unu el la PCI-aj kartojn sur la sekvanta ekrano."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Neniu ISDN-a PCI-a karto trovata.  Bonvole elektu unu el la PCI-aj kartojn "
-"sur\n"
-"la sekvanta ekrano."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Telefon-konektaj opcioj"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nomo de konekto"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnumero"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Salutnomo"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP (Pasvorta Aýtentikigada Protokolo)"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Programeto-bazata"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Finaparato-bazata"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domajna nomo"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Du DNS-a Servilo (nedeviga)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Malkonektu"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Konfiguru retumon"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interreta konekta¼o kaj konfiguro"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Reta Konfigura¼o"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Elektu la defaýltan uzulon:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detektas aparatojn..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN Konfigura¼o"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Reta interfaco"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN Konfigura¼o"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Elektu la ilon kiun vi deziras instali"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Æu vi deziras starti vian konekta¼on je startado de la sistemo?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Reta Konfigura¼o"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-#, fuzzy
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVERTO: Æi tiu aparato estis antaýe konfigurata por konekti al la "
-"Interreto.\n"
-"Simple klaki JES por teni la konfiguron de æi tiu aparato.\n"
-"Se vi modifos la subajn kampojn, vi þanøos æi tiun konfiguron."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bonvole enigu la IP-an konfigurâjon por æi tiu komputilo.\n"
-"Æiu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
-"(ekzemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguras retan aparaton %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "XFree86 pelilo: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adreso"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Retmasko"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Aýtomata IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Bonvole enigu vian poþtejon.\n"
-"Via poþtejo devus esti plene specifita poþtejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
-"Vi ankaý povas enigi la IP-adreson de la prokura kluzo se via havas unu."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNA servilo"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Prokura kluzaparato"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP prokura servilo"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP prokura servilo"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Prokura servilo devus esti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Prokura servilo devus esti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Æu vi deziras provi konekti al la interreto nun?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Konfiguru interretan konekta¼on"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurado de Konekto"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Bonvole plenigu aý marku la suban kampon"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ de Karto"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoro de Karto (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "I/O (Eneligo) de Karto"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "I/O 0 (Eneligo 0) de Karto"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "I/O 1 (Eneligo 1) de Karto"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Via persona telefonnumero"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonnumero de interretprovizanto"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provizanto DNS 1 (nedeviga)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provizanto DNS 2 (nedeviga)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Elektu vian klavaron"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Diskuma modalo"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Speco de konekto"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Speco de konekto"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konta Salutnomo (uzula nomo)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Konta Pasvorto"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "muntado malsukcesis: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Æi tiu platformo ne subtenas etendatajn subdiskojn"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Vi havas truon en via subdisktabelo sed mi ne povas uzi øin.\n"
-"La sola solvo estas movi viajn æefajn subdiskojn por situigi la truon\n"
-"apud la etendataj subdiskoj."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaýris el dosiero %s malsukcesis: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "havenda"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "grava(j)"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "tre agrabla(j)"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "agrabla(j)"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "elbe"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Loka printilo"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Malproksima printilo"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Malproksimaj lpd servilo"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Reta Printilo (TCP/ingo)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Vindozo 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printservilo"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printila Aparato URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Loka printilo"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Malproksima printilo"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP de SMB servilo"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Defaýlta)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kiel estas la printilo konektata?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-"æi tie; printiloj estos aýtomate dektektataj.  Se vi havas dubojn,\n"
-"elektu \"Malproksima CUPS servilo\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Pordo"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detektas aparatojn..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Provu pordojn"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalanta paka¼o %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalanta paka¼o %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Por uzi malproksima lpd printvico, vi devas provizi la poþtejon de la\n"
-"printservilo kaj la printviconomon æe tiu servilo en kiun taskoj devus\n"
-"esti metata."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Malproksima poþtejo"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Malproksima poþtejo"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Malproksima poþtejo"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Por printi al SMB-a printilo, vi devas provizi la SMB poþtejon (Notu! Øi "
-"eble\n"
-"estas malsama de øia TCP/IP nomo!) kaj eble la IP-adreson de la "
-"printservilo,\n"
-"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
-"taýgan salutnomon, pasvorton, kaj laborgrupan informon."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Poþtejo de SMB servilo"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Opuza nomo"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Laborgrupo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
-"nomon (Notu! Øi eble estas malsama de øia TCP/IP nomo!) aldone al la\n"
-"printvican nomon por la printilo vi deziras atingi kaj iun ajn taýgan\n"
-"salutnomon kaj pasvorton."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printservilo"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Printvica Nomo"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Ing-Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Por printi al inga printilo, vi bezonas provizi la\n"
-"poþtejon de la printilo kaj opcie la pordnumeron."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printilaj Poþtejo"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printilaj Poþtejo"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nomo de printilo"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Priskribo"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Loko"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Æu tio æi pravas?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kiun specon de printilo vi havas?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Æu vi deziras provi printado?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Provu pordojn"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Jes, printu ambaý de la provpaøojn"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printilo"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Laýnorma"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Provpaøo(j)n estis sendataj al la printila demono.\n"
-"Æi tiu eble postulas iom da tempo antaý ol la printilo komencas.\n"
-"Printada stato:\n"
-"%s\n"
-"\n"
-"Æu øi øuste funkcias?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Provpaøo(j)n estis sendataj al la printila demono.\n"
-"Æi tiu eble postulas iom da tempo antaý ol la printilo komencas.\n"
-"Æu øi øuste funkcias?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Malfermu"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Haltas de la reto"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Haltas de la reto"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Printilaj opcioj"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Startas vian konekta¼on..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfiguru retumon"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfiguras reto"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alta"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoja"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfiguru Printilon"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalanta paka¼o %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printilaj opcioj"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfiguru Printilon"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Æu vi deziras konfiguri printilon?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Printilo"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli aý þanøi la ekzistantajn."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli aý þanøi la ekzistantajn."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Konfiguru retumon"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normala Modalo"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Printas provpaøo(j)n..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porto"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Prokura servilo devus esti http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Prokura servilo devus esti ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Aýtomata-enregistrado"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "pasvorto"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Neniu pasvorto"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "La pasvortoj ne egalas.  Provu denove!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne povas skribi dosieron %s."
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid malsukcesis"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid malsukcesis (eble raidtools mankas)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ne estas sufiæaj subdiskoj por RAID nivelo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, perioda ordonvicigilo."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd estas uzata por monitori la bateriostaton kaj registri øin en la\n"
-"sistemlogdosiero (syslog).  Vi ankaý povas uzi øin por halti la komputilon\n"
-"kiam la baterioþargo estas malgranda."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Lanæas ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
-"'at' estis uzata, kaj lanæas baæajn ordonojn kiam la þargmezo estas\n"
-"sufiæe malgranda."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron estas norma Uniksa programo kiu lanæas programojn kiujn la uzulo\n"
-"specifas je periodaj tempoj.  vixie cron aldonas kelkajn trajtojn al la\n"
-"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
-"konfiguraj opcioj."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aldonas subtenon por musoj al teksta-reøimaj Linuksaj aplikoj ekzemple\n"
-"la 'Midnight Commander' (Meznokta Estro).  Ankaý øi permesas uzi la muson\n"
-"por transpoþigi æe la konzolo (Sen X Fenestroj)."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache estas Tut-Tera Teksa¼a servilo.  Øi liveras HTML-ajn dosierojn\n"
-"kaj CGI (komunakluza interfaco)."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"La interreta superservila demono (kutime nomata inetd) lanæas sortimenton\n"
-"da aliaj interretaj servoj laýbezone.  Øi respondas por la lanæo de multaj\n"
-"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin.  Se vi malþaltas inetd,\n"
-"ve malþaltas æiujn el la servoj por kiuj øi respondas."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Æi tiu paka¼o þargas la elektitan klavarmapon laý /etc/sysconfig/keyboard.\n"
-"Vi povas elekti æi tion per la kbdconfig utilprogramo.  Vi lasus æi tion\n"
-"ebligatan por la plejmulto da sistemoj."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd estas la printvica dajmono bezonata por lpr taýge funkcii.  Øi estas\n"
-"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"'named' (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
-"poþtejojn de IP adresoj."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Muntas kaj malmuntas æiujn RetDosierSistemajn (NFS), SMB (Lan\n"
-"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Þaltas/Malþaltas æiujn retajn interfacojn konfiguratajn por lanæi\n"
-"dum sistemstartado."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Æi tiu servo provizas NFS dosierþlosado, kiun vi konfiguras per la\n"
-"/etc/exports dosiero."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Æi tiu servo provizas NFS dosierþlosado."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA subteno kutime estas subteno de a¼o kiel ethernet kaj modemoj en\n"
-"tekkomputiloj.  Øi ne estos lanæata krom se vi konfiguras øi por ke øi\n"
-"estu sendanøera æe komputiloj kiuj ne bezonas øin."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
-"uzas.\n"
-"La pordmapservilo devas esti uzata æe komputiloj kiuj agas kiel serviloj\n"
-"por protokoloj kiuj uzas la RPC mekanismon."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"\"Postfix\" estas PoþtTransportPerilo, kiu estas la programo kiu movas\n"
-"retpoþton de unu komputilo al alia."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Savas kaj restaýras sisteman entropikomuna¼on por pli altkvalita\n"
-"generado de aleatoraj nombroj."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"La routed dajmono permesas aýtomatan øisdatigon de la IP enkursigila tabelo\n"
-"per la RIP protokolo.  Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
-"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
-"pri la rapideco de iu ajn komputilo sur tiu reto."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
-"konektataj æe aliaj respondantaj komputiloj."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"La rwho protokolo permesas al uzuloj havigi liston de æiuj el la uzuloj\n"
-"konektataj æe komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
-"mesaøojn al diversaj sistemlogdosieroj.  Øi estas bona ideo æiam uzi\n"
-"syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Startas kaj æesigas la X Tiparan Servilon je starttempo kaj æesiga tempo."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printilo"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Interreto"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistema modalo"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Datumbazoj"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "Servilo"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Averto"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Alfiksu"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Stato:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektoro"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "La cetero de la mondo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Interreto"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Plurmedia - Grafiko"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Programisto"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Konekti al la interreto"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Reta interfaco"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Poþtejo de SMB servilo"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Ludoj"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Spertulo"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalanta paka¼o %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon, øi estas tro difektita por mi :(\n"
-"Mi penos daýri per blankigi difektitajn subdiskojn"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Eraro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulojn!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalu"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Aldonu uzulon"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Elektado de Paka¼oj"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Bonvole, elektu la paka¼ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Forigu Vindozon"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Bonvole provu denove"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Bonvole provu denove"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Neniu pasvorto"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN Konfigura¼o"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Bonvole, elektu vian klavaran aranøon."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Bonvole, elektu la paka¼ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Reta interfaco"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Bonvole, elektu la paka¼ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Rado"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Rado"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modulaj opcioj:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Reta Konfigura¼o"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Bonvole, elektu la paka¼ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Bonvole, elektu la paka¼ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcioj"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Reta Konfigura¼o"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaýru de disketo"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Alia"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalu sistemon"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaýru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaýru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Akomodata"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Helpo"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Antaýa"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Stato:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaýru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Sekvanta ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Elektu paka¼ojn"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Konservu en dosiero"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Bonvole, elektu la paka¼ojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Reta Konfigura¼o"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Reta Konfigura¼o"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalado de %s malsukcesis.  La sekvanta eraro okazis:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "neniu retkarto trovita"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Finata"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preparas instaladon"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "limigu"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "limigu"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatu subdiskojn"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN Konfigura¼o"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Surmetingo"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oficejo"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Æesigu"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printilo"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalu sistemon"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Elektu dosieron"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Malproksima printilo"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalu"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Eliru instalprogramon"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:139
-#, fuzzy
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "malebligu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "forsendu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rekonfiguru"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Detektas aparatojn..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: ../../standalone/drakgw_.c:164
-#, fuzzy
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ebligu"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi øian Interretan konekton.\n"
-"Notu: vi bezonas dediæan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"Æu vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaco %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lanæu la\n"
-"aparatokonfigurilon."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Reta interfaco"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
-"\n"
-"%s\n"
-"\n"
-"Æu vi deziras konfiguri vian Lokan Reton (LAN) kun æi tiu adaptilo?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Konfigura¼o de barilo detektata!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Averto.  Ekzistanta konfigura¼o de barilo detektata.  Vi eble devas permane\n"
-"fiksi øin poste de la instalado."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Mi konfiguras..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemoj instalante paka¼on %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:690
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interreta konekta¼o kaj konfiguro"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ISDN-a Konfigura¼on"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "muntado malsukcesis: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Poþtejo: "
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Interreto"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Speco:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Kluzo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "Interreto"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Stato:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Konfiguru servojn"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Pelilo"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaco"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokolo"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Stato:"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Konfiguru lokan reton"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Soræisto..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Apliku"
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Provu konfigura¼on"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektita"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ne konektita"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Malkonektu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptilo %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiva"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktiva"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Interreta konekta¼o kaj konfiguro"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Interreta konekta¼o kaj konfiguro"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Speco de konekto"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Kluzo"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Elektas sekurnivelon"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Konekti al la interreto"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elektu la ilon kiun vi deziras instali"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanada (Kebeka)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Eýropo"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islanda"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Eýropo"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seria"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uzado: keyboarddrake [--expert] [klavaro]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aranøon."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Þanøu KD-ROM-on"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Þanøu vian KDROM!\n"
-"\n"
-"Bonvole, enþovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas øin, klaku \"Nuligu\" por eviti la instaladon de æi tiu KDROM."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Montru nur por æi tiu tago"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Dosiero/_Nova"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Dosiero/_Malfermu"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>M"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Dosiero/_Savu"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Dosiero/Savu _Kiel"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Dosiero/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcioj"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcioj/Provu"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Helpo"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Helpo/_Pri..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-iso8859-3,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-iso8859-3,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Salutnomo"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "mesaøoj"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "sistema logdosiero (syslog)"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "seræu"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ilo por vidi vian logdosieron"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Konfigura¼oj"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "konformanta(j)"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "sed ne konformanta(j)"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Elektu dosieron"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendaro"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Enhavoj de la dosiero"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigura¼on"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Servilo"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatas"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Savu Kiel..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "neniu serial_usb (seria USB) trovita\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Æu vi deziras emuli trian musbutonon?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Elektu grafikan karton"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Starta aparato"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigura¼o de barilo"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigura¼o de barilo"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Elektu vian lingvon"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Elektu instalklason"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguru muson"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Elektu vian klavaron"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatu subdiskojn"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Elektu paka¼ojn"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalu sistemon"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Aldonu uzulon"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguru retumon"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguru servojn"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalu restart-þargilon"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Kreu praþargdisketon"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguru X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalu sistemon"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Eliru instalprogramon"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne povis malfermi %s por skribi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Konfigura¼o de barilo"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Preparas instaladon"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "TTT/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficejo"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnoma Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Plurmedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Database"
-msgstr "Datumbazoj"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentaro"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Interreta Konfigurado"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN Konfigura¼o"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servilo"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C kaj C++ programadaj bibliotekoj, programoj kaj æapdosieroj"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Dokumentaro"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Plurmedia - Grafiko"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interreto"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktiloj, þeloj, dosieriloj, terminaloj"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Plurmedia - KD-ROM Kreado"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Laborstacio"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Æesigu"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Finata"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Elektu la defaýltan uzulon:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Malproksima printilo"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Nun vi povas provizi øiajn opciojn al modulo %s."
-
-#~ msgid "mount failed"
-#~ msgstr "muntado malsukcesis"
-
-#~ msgid "Low"
-#~ msgstr "Malalta"
-
-#~ msgid "Medium"
-#~ msgstr "Meza"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Malmultaj plibonigoj æe æi tiu sekurnivelo, la æefa estas ke øi havas "
-#~ "pli\n"
-#~ "multajn sekurecajn avertojn kaj kontrolojn."
-
-#~ msgid "Boot mode"
-#~ msgstr "Starta modalo"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Spertulo"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linukso administras tempon en GMT aý \"Grenviæa Meza Tempo\" kaj "
-#~ "tradukas øin\n"
-#~ "en lokan tempon laý la horzono vi elektis."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Konektu al la Interreto"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Malkonektu el la Interreto"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfiguru interretan konekta¼on"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Al kiu disko vi deziras movi?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Bonvole, elektu la paka¼ojn kiujn vi deziras instali."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informo"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnoma Laborstacio"
-
-#~ msgid "authentification"
-#~ msgstr "aýtentikigado"
-
-#~ msgid "user"
-#~ msgstr "uzanto"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Bonvole, elektu la specon de via muso."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Æesu"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Aýtomata muntado de demetebla medio"
-
-#~ msgid "Active"
-#~ msgstr "Aktiva"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ne"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Printilo, tipo \"%s\", estas detektita æe "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Loka Printila Aparato"
-
-#~ msgid "Printer Device"
-#~ msgstr "Printila Aparato"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Malproksima CUPS-a servilo"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Malproksima CUPS-a servilo"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linukso"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistema modalo"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Alia"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Bonvole, elektu vian klavaran aranøon."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Bonvolu klaki sur subdiskon"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Speco: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Malbona rezerva dosiero"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Konfiguru X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Printila Aparato"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Nuligu"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Jeso"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Malfermu"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Startas vian konekta¼on..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Fermas vian konekta¼on..."
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Elektu la grandecon kiu vi deziras instali"
-
-#~ msgid "Total size: "
-#~ msgstr "Tuta grandeco: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Bonvolu atendi"
-
-#~ msgid "Total time "
-#~ msgstr "Tuta tempo "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Uzu ekzistantan konfiguron de X11 (X-fenestroj)?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Al kiu aparato estas via printilo konektata\n"
-#~ "(notu ke /dev/lp0 egalas LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Averto, la retadaptilo estas jam konfigurata.\n"
-#~ "Æu vi deziras rekonfiguri øin?"
-
-#~ msgid "New"
-#~ msgstr "Nova"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Malproksima printvico"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Bonvolu klaki sur subdiskon"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambigueco (%s), esti pli preciza\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (defaýlto estas %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Via elekta¼o (defaýlto estas %s  enigu `neniu' por elekti neniu) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Æu vi konsentas?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Æu vi deziras provi la konfigura¼on?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Krom se vi scias precize alie, la kutima elekto estas \"/dev/hda\"\n"
-#~ " (unua æefa IDE-a disko) aý \"/dev/sda\" (unua SCSI-a disko)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Speco de konekto"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Elektu la defaýltan uzulon:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Bonvole, provu la muson"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Bonvole elektu vian preferatan lingvon por instalado kaj sistema uzado."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Elektu la aranøon de via klavaro el la listo supre"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Elektu:\n"
-#~ "\n"
-#~ "  - Akomodata: Se vi sufiæe konas GNU/Linukson, vi povas elektu la æefan\n"
-#~ "    uzadon por via komputilo.  Vidu malantaýe por detaloj.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Spertulo: Æi tio supoza ke vi flue konas GNU/Linukson kaj deziras "
-#~ "fari\n"
-#~ "    treege akomodatan instaladon.  Simile kiel \"Akomodata\" instalado, "
-#~ "vi povos\n"
-#~ "    elekti la uzado por via komputilo.\n"
-#~ "    Sed bonvolege, NE ELEKTU ÆI TION KROM SE VI SCIAS KION VI FARAS!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Nun vi devas elekti la uzadon por via komputilo.  Jen la elektoj:\n"
-#~ "\n"
-#~ "* Laborstacio: æi tio estas la ideala opcio se vi intencas uzi vian\n"
-#~ "  komputilon æefe por æiutaga uzado æe la oficejo aý hejme.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Programado: se vi intencas uzi vian komputilon æefe por programado,\n"
-#~ "  æi tio estas bona opcio.  Vi havos plenan aron de programiloj por\n"
-#~ "  kompili, erarseræi, formati programfontojn, kaj krei\n"
-#~ "  programpaka¼ojn.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servilo: se vi intencas uzi æi tiun komputilon kiel servilo, æi tio\n"
-#~ "  estas bona opcio.  Aý dosierservilo (NFS aý SMB), printservilo\n"
-#~ "  (Uniksa stilo aý Mikrosofta Vindoza stilo), aýtentikada servilo\n"
-#~ "  (NIS), aý datumbaza servilo, ktp.  Kiel tia, ne atendu umojn (KDE,\n"
-#~ "  GNOME, ktp.) estas instalotaj."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Nun vi povas elekti la paka¼aron kiun vi deziras instali aý promocii.\n"
-#~ "\n"
-#~ "Tiam DrakX kontrolos æu vi havas sufiæe da spaco por instali æiujn de "
-#~ "ili.\n"
-#~ "Se ne, øi informas vin pir øi.  Se vi deziras antaýeniri malgraýe, øi\n"
-#~ "antaýeniros je la instalado de æiuj de la elektitaj paka¼aroj sed lasos\n"
-#~ "fali iujn paka¼ojn kiujn estas malpli interesaj.  Suben de la listo vi\n"
-#~ "povas elekti la opcion \"Elektado de apartaj paka¼oj\"; æiokaze vi devus\n"
-#~ "foliumi tra pli ol 1000 paka¼oj..."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se vi havas æiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-#~ "Se vi havas neniujn de æi tiuj KDROM-oj, klaku \"Nuligu\".\n"
-#~ "Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku "
-#~ "\"Jes\"."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Nun vi povas enigi telefon-konektajn opciojn.  Se vi ne estas certa kio "
-#~ "enigi,\n"
-#~ "vi povas havigi la øustan informon de via interretprovizanto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Enigu:\n"
-#~ "\n"
-#~ "  - IP-adreson: Se vi ne scias, demandu al via retadministranto.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retmaskon: \"255.255.255.0\" øenerale estas bona elekta¼o.  Se vi ne\n"
-#~ "estas certa, demandu al via retadministranto aý interretprovizanto.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Aýtomata IP-adreson: Se via reto uzas BOOTP-an aý DHCP-an "
-#~ "protokolon,\n"
-#~ "elektu æi tiun opcion.  Se elektita, neniu valoro estas bezonata en\n"
-#~ "\"IP-adreson\".  Se vi ne estas certa, demandu al via retadministranto\n"
-#~ "aý interretprovizanto.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Se via reto uzas NIS, elektu \"Uzu NIS\".  Se vi ne scias, demandu al "
-#~ "via\n"
-#~ "retadministranto."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Nun vi povas enigi telefon-konektajn opciojn.  Se vi ne estas certa kio "
-#~ "enigi,\n"
-#~ "vi povas havigi la øustan informon de via interretprovizanto."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se vi uzos prokurajn servilojn, bonvolu konfiguri ilin nune.  Se vi ne\n"
-#~ "scias æu vi uzos prokurajn servilojn, demandu al via retadministranto aý\n"
-#~ "interretprovizanto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Vi povas instali kriptografian paka¼on se via interreta konekto estas "
-#~ "øuste\n"
-#~ "pretigita.  Unue elektu spegulon de kie vi deziras elþuti paka¼ojn kaj "
-#~ "poste\n"
-#~ "elektu la paka¼ojn por instali.\n"
-#~ "\n"
-#~ "Notu ke vi devas elekti spegulon kaj kriptografiajn paka¼ojn laý la "
-#~ "leødonoj\n"
-#~ "de via lando."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Nun vi povas enigi la \"root\" (radiko) pasvorto por via Linuks-"
-#~ "Mandrejka\n"
-#~ "sistemo.  Vi devas enigi la pasvorton dufoje por konfirmi ke ambaý fojoj\n"
-#~ "estas identaj.\n"
-#~ "\n"
-#~ "\n"
-#~ "La \"root\"-a uzanto estas la administranto de la sistemo, kaj estas la "
-#~ "sola\n"
-#~ "uzanto permesata þanøi la sisteman konfigura¼on.  Tial, elektu æi tiun\n"
-#~ "pasvorton zorge!  Nepermesata uzado de la \"root\"-a uzanto povas esti\n"
-#~ "treege danøera al la sistema integreco kaj dateno, kaj al aliaj sistemoj\n"
-#~ "konektata al øi.  La pasvorto devus esti miksa¼o de literciferaj signoj "
-#~ "kaj\n"
-#~ "almenaý 8 signoj longa.  *Neniam* surpaperigu øin.  Tamen, ne elektu tro\n"
-#~ "longan aý komplikan pasvorton: vi devas povi memori øin sen tro multe da\n"
-#~ "peno."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Nun vi povas krei unu aý pli \"ordinara(j)\" uzanto(j), male al la\n"
-#~ "\"privilegia\" uzanto, \"root\".  Vi povas krei unu aý pli uzanto(j) por\n"
-#~ "æiu persono vi deziras permesi uzi la komputilon.  Notu ke æiu uzanto\n"
-#~ "havos viajn proprajn preferojn (grafikan medion, programajn aranøojn,\n"
-#~ "ktp.) kaj øian propran \"hejman dosierujon\", kie æi tiuj preferoj estas\n"
-#~ "konservata.\n"
-#~ "\n"
-#~ "\n"
-#~ "Antaý æio, krei uzanton por vi mem!  Eæ se vi estos la sola uzulo æe la\n"
-#~ "komputilo, vi ne devus konekti kiel \"root\" por æiutaga uzado de la\n"
-#~ "sistemo: øi estas tre alta sekureca risko.  Fari la sistemon neuzebla\n"
-#~ "estas oftege nur unu misklavo fora.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tial, vi devus konekti al la sistemo per ordinara uzanto vi kreos æi "
-#~ "tie,\n"
-#~ "kaj saluti kiel \"root\" nur por administraj kaj flegadaj kialoj."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO kaj Grub æefaj opcioj estas:\n"
-#~ "  - Startaparato: Fiksas la nomon de la aparato (ekz-e subdisko de "
-#~ "fiksdisko)\n"
-#~ "tiu enhavas la startsektoron.  Krom se vi scias specife alie, elektu\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Prokrastoperiodo antaý starti defaýltan sistemon: Elektas la nombron\n"
-#~ "da dekonoj de sekundo ke la startþargilo devus atendi antaý starti la\n"
-#~ "unuan sistemon.  Æi tiu utilas æe sistemoj kiuj tuj startas de la\n"
-#~ "fiksdisko malantaý ili ebligas la klavaron.  La startþargilo ne atendas "
-#~ "se\n"
-#~ "\"delay\" (prokrastoperiodo) estas ellasita aý estas fiksita al nul.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Grafika reøimo: Æi tiu specifas la VGA tekstan reøimon por uzi dum\n"
-#~ "start.  La sekvantaj valoroj estas uzeblaj:\n"
-#~ "    * normala: elektu normalan 80 per 25 tekstan reøimon.\n"
-#~ "    * <numero>: uzu la respondan tekstan reøimon."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO estas startþargilo por Sparc: øi povas starti aý Linukson aý iun "
-#~ "ajn\n"
-#~ "mastruman sistemon æeestanta æe via komputilo.  Normale, æi tiuj aliaj\n"
-#~ "mastrumaj sistemoj estas øuste detektata kaj instalada.  Se tiel ne "
-#~ "estas,\n"
-#~ "vi povas aldoni enskribon mane per æi tiu ekrano.  Zorgu elekti la "
-#~ "øustajn\n"
-#~ "parametrojn.\n"
-#~ "\n"
-#~ "\n"
-#~ "Eble vi ankaý ne deziras doni atingon al æi tiuj aliaj mastrumaj "
-#~ "sistemoj\n"
-#~ "al iu ajn.  Æiokaze vi povas forstreki la respondajn enskribojn.  Sed\n"
-#~ "æiokaze, vi bezonos startdiskon por starti ilin!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO æefaj opcioj estas:\n"
-#~ "  - Instalado de Startþargilo: Indiki kie vi deziras meti la informon\n"
-#~ "bezonata por start GNU/Linukso.  Krom se vi scias specife kion vi faras,\n"
-#~ "elektu \"Unua sektoro de drajvo (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Prokrastoperiodo antaý starti defaýltan sistemon: Elektas la nombron\n"
-#~ "da dekonoj de sekundo ke la startþargilo devus atendi antaý starti la\n"
-#~ "unuan sistemon.  Æi tiu utilas æe sistemoj kiuj tuj startas de la\n"
-#~ "fiksdisko malantaý ili ebligas la klavaron.  La startþargilo ne atendas "
-#~ "se\n"
-#~ "\"delay\" (prokrastoperiodo) estas ellasita aý estas fiksita al nul."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Nun estas tempo por konfiguri la X Fenestra Sistemo, kiu estas la kerno\n"
-#~ "de la GNU/Linuksa GUI (Grafika UzulInterfaco).  Por tiu celo, vi devas\n"
-#~ "konfiguri vian grafikan karton kaj ekranon.  La plejparto de æi tiuj "
-#~ "paþoj\n"
-#~ "estas aýtomatitaj, tamen, do via laboro eble konsistos en konfirmi kion\n"
-#~ "estis farata kaj akcepti la aranøojn. :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kiam la konfigurado estas kompleta, X lanæiøos (krom se vi demandas al\n"
-#~ "DrakX ne fari tion) pro ke vi kontrolu øin la observu se la aranøojn\n"
-#~ "taýgas por vi.  Se ne, vi povas reveni kaj þanøi ilin, tiom da tempoj "
-#~ "kiom\n"
-#~ "estas necesa."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se iu misas en la X-a konfigura¼o, uzu æi tiujn opciojn por øuste "
-#~ "konfiguri\n"
-#~ "la X Fenestran Sistemon."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se vi preferas uzi grafikan saluton, elektu \"Jes\".  Aliokaze, elektu "
-#~ "\"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Via sistemo restartos.\n"
-#~ "\n"
-#~ "Post restartado, via nova Linuks-Mandrejka sistemo þargiøos aýtomate.  Se "
-#~ "vi\n"
-#~ "deziras starti en alian ekzistanta mastruman sistemon, bonvole legu la\n"
-#~ "pluan instrukcion."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Æe¶a (Programistoj)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaka (Programistoj)"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skribu /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatu æion"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Post formatado de æiuj subdisko,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "æiuj datenoj sur tiuj subdisko estos perdata"
-
-#~ msgid "Reload"
-#~ msgstr "Reþargu"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Æu vi deziras krei aýtoinstalan disketon por replikado de Linukso?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL Konfigura¼o"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-#~ "æi tie; printiloj estos aýtomate dektektataj.  Se vi havas dubojn,\n"
-#~ "elektu \"Malproksima CUPS servilo\"."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Malproksima printvico"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domajna nomo"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Neniu printilo"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "ISDN-a Konfigura¼on"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "muntado malsukcesis: "
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Sendrapideco: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ricevrapideco: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Speco de konekto"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Konektas al la Interreto"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Malkonektas el la Interreto"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Malkonektado el la Interreto malsukcesis."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Malkonektado el la Interreto finis."
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Nomo de konekto"
-
-#~ msgid "sent: "
-#~ msgstr "sendita(j): "
-
-#~ msgid "received: "
-#~ msgstr "ricevita(j): "
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Defaýlta"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Mi ne povas kompreni la enhavon de la konfigurodosiero."
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptilo"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Malebligu"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Ebligu"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Konfiguru interretan konekta¼on"
-
-#~ msgid "Choose"
-#~ msgstr "Elektu"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Vi povas specifi rekte la URI por atingi la printilon per CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jes, printu Askian provpaøon"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jes, printu PostSkriban provpaøon"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papergrandeco"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "El¼etu paøon post tasko?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-aj pelilaj opcioj"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kolorprofunecaj opcioj"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Printu tekston kiel PostScripto?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Riparu þtuparan tekston?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombro de paøoj en eliga paøo"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr ""
-#~ "Dekstra/Maldrekstra marøenoj en punktoj (1/72 de colo, proksimume 1/3 mm)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr ""
-#~ "Supra/Malsupra marøenoj en punktoj (1/72 de colo, proksimume 1/3 mm)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Aldonaj GhostScript-aj opcioj"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Aldonaj Tekstaj opcioj"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inversigu ordon de paøoj"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Elektu Malproksiman Printilan Konekton"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Æiuj printilo bezonas nomon (ekzemple lp).\n"
-#~ "Aliaj parametroj, ekzemple la priskribon de la printilo aý øian lokon\n"
-#~ "vi povas difini.  Kiu nomo devus uzata por æi tiu printilo kaj kiel\n"
-#~ "øi estas konektata?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Æiuj printvico (al kiu printajn taskojn estas direktata) bezonas nomon\n"
-#~ "(ofte lp) kaj fonan eneligan dosierujon asociata kun øi.  Kiu nomo kaj\n"
-#~ "dosierujo devus uzata por æi tiu printvico?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nomo de printvico"
-
-#~ msgid "Spool directory"
-#~ msgstr "Fona eneliga dosierujo"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
deleted file mode 100644
index fb6f837b3..000000000
--- a/perl-install/share/po/es.po
+++ /dev/null
@@ -1,12570 +0,0 @@
-# Translation file (spanish) of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 1999-2000
-# Fabian Mandelbaum <fabman@mandrakesoft.com>, 2000, 2001, 2002
-# Juan Manuel García Molina <juanma_gm@wanadoo.es>, 2000-2002
-# Carlos Sánchez <vcbsaorc@vc.ehu.es>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-15 10:34-0300\n"
-"Last-Translator: Fabian Mandelbaum <fabman@mandrakesoft.com>\n"
-"Language-Team: Spanish <cooker-i18n@linux-mandrake.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurar los monitores independientemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usar extensión Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar sólo la tarjeta \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuración multi-monitor"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Su sistema soporta configuración multi-monitor.\n"
-"¿Qué desea hacer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccione una tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Elija un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Elija un controlador X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Controlador X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¿Qué tipo de configuración de XFree desea tener?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta puede admitir aceleración 3D pero sólo con XFree %s.\n"
-"XFree %s admite su tarjeta y puede tener mejor comportamiento en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Su tarjeta puede admitir aceleración 3D por hardware con XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Su tarjeta puede admitir aceleración 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D EXPERIMENTAL por hardware"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta sólo puede admitir aceleración de 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR.\n"
-"XFree %s admite su tarjeta y puede tener un mejor comportamiento en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalación del controlador de la pantalla)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuración de XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione la cantidad de memoria de su tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Elija las opciones para el servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Elija un monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Los dos parámetros críticos son la frecuencia de barrido vertical, que "
-"indica la frecuencia\n"
-"a la cual se refresca la pantalla entera, y más importante aún, la "
-"frecuencia de sincronización\n"
-"horizontal, la cual es la frecuencia de las líneas de barrido horizontal.\n"
-"\n"
-"Es MUY IMPORTANTE que no especifique un tipo de monitor con una\n"
-"frecuencia de sincronización superior a la capacidad real de su monitor:\n"
-"puede dañar su monitor.\n"
-" En caso de duda, elija una configuración conservadora."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de barrido horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de barrido vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "El monitor no está configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La tarjeta gráfica todavía no está configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Aún no ha elegido las resoluciones"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "¿Desea probar la configuración?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advertencia: probar con esta tarjeta de vídeo puede colgar su ordenador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Probar la configuración"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"intente cambiar algunos parámetros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocurrió un error:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saliendo en %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "¿Es ésta la configuración correcta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocurrió un error, intente cambiar algunos parámetros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolución"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Elija la resolución y la profundidad de colores"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Tarjeta gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Más"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo experto"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostrar todo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluciones"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Distribución del teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de ratón: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del ratón: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Tarjeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificación de la tarjeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria de la tarjeta gráfica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidad de color: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolución: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparando la configuración de X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "¿Qué desea hacer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Cambiar el monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Cambiar la tarjeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Cambiar las opciones del servidor X"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Cambiar la resolución"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar información"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probar de nuevo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Salir"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"¿Conservar los cambios?\n"
-"La configuración actual es:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X al arrancar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Puede configurar su computadora para que inicie X automáticamente\n"
-"al arrancar. ¿Desea que se lance X cuando reinicie?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Abra de nuevo una sesión %s para activar los cambios"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor salga de la sesión y luego pulse Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil colores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil colores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millones de colores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 billones de colores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB o más"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estándar, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (sin 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA extendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA no-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que soporta 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que soporta 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partición de arranque"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector del disco (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalación de SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "¿Dónde quiere instalar el cargador de arranque?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalación de LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO con menú de texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO con menú gráfico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrancar desde DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opciones principales del cargador de arranque"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Cargador de arranque a usar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalación del cargador de arranque"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (no funciona con BIOS antiguos)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de vídeo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Demora antes de arrancar la imagen predeterminada"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Contraseña"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Contraseña (de nuevo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restringir las opciones de la línea de comandos"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restringir"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Limpiar /tmp en cada inicio del equipo"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precise el tamaño de la RAM si es necesario (se encontraron %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activar perfiles múltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Proporcione el tamaño de la RAM en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"La opción \"Restringir las opciones de la línea de comandos\"\n"
-"no tiene sentido sin contraseña"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Vuelva a intentarlo, por favor"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Las contraseñas no coinciden"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensaje de inicio"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Demora de open firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tiempo de espera de arranque del núcleo"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "¿Habilitar el arranque desde CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "¿Habilitar el arranque de OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "¿SO predeterminado?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Decidió instalar el cargador de arranque en una partición.\n"
-"Esto implica que ya tiene un cargador de arranque en el disco desde el que "
-"arranca (ej: System Commander).\n"
-"\n"
-"¿Desde qué disco arranca?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aquí están las diferentes entradas.\n"
-"Puede añadir otras o cambiar las que ya existen."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Añadir"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hecho"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "¿Qué tipo de entrada desea añadir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Otro SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Otro SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Otro SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imagen"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Raíz"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Añadir"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura/Escritura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabla"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Por defecto"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Tamaño de initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Quitar entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "No se admite una etiqueta vacía"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Debe especificar una imágen del núcleo"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Debe especificar una partición raíz"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Esta etiqueta ya está en uso"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s encontradas"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "¿Tiene alguna otra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¿Tiene alguna interfaz %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sí"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ver información sobre el hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando controlador para la tarjeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¿Qué controlador de %s debo probar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En algunos casos, el controlador de %s necesita información extra\n"
-"para funcionar correctamente, aunque normalmente funcione sin ella.\n"
-"¿Desea especificar información extra para el controlador o dejar que el "
-"mismo\n"
-"pruebe su equipo y encuentre la información que necesita? A veces,\n"
-"el probar el equipo puede provocar que éste se cuelgue, pero no debería\n"
-"causar ningún daño."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autodetección"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar las opciones"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Ahora puede proporcionar las opciones al módulo %s.\n"
-"Note que cualquier dirección debe ingresarse con el prefijo 0x como '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Aquí deben ir las diferentes opciones para el módulo %s.\n"
-"Las opciones son de la forma \"nombre=valor nombre2=valor2 ...\".\n"
-"Por ejemplo, \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opciones de los módulos:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Error al cargar el módulo %s.\n"
-"¿Desea intentarlo de nuevo con otros parámetros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "acceso a programas X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "acceso a herramientas rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "permitir \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "acceso a archivos administrativos"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ya fue añadido)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Esta contraseña es demasiado sencilla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Introduzca el nombre de usuario"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nombre de usuario (login) sólo debe contener letras, números, `-' y `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Este nombre de usuario ya fue añadido"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Añadir un usuario"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduzca un usuario\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceptar el usuario"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nombre y apellidos"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nombre del usuario"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icono"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Entrada automática"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Puede configurar su computadora para que entre automáticamente\n"
-"en sesión con un usuario dado al arrancar. ¿Desea esa funcionalidad?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Elija el usuario predeterminado:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Elija el gestor de ventanas a ejecutar:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Por favor, elija el idioma a usar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Puede elegir otros idiomas, que estarán disponibles después de la instalación"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Todo"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Permitir a todos los usuarios"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizada"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "No compartir"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Se necesita instalar el paquete %s. ¿Quiere instalarlo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Puede exportar usando NFS o Samba. ¿Cuál elige"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Falta el paquete obligatorio %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"¿Desea permitir a los usuarios exportar algunos directorios personales?\n"
-"Si lo hace, los usuarios podrán simplemente hacer clic sobre \"Compartir\" en konqueror y nautilus.\n"
-"\n"
-"\"Personalizar\" permite una granularidad por usuario.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Lanzar userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"La compartición por usuario utiliza el grupo \"fileshare\". \n"
-"Puede utilizar userdrake para añadir un usuario a este grupo."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bienvenidos, crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estándar"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Más alta"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoica"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nivel se debe usar con mucho cuidado. Hace su sistema más simple de\n"
-"usar, pero también mucho más vulnerable: no debe usarse para una máquina\n"
-"conectada en red con otras o a Internet. No hay contraseñas de acceso."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Las contraseñas están activadas, pero tampoco se recomienda usar este\n"
-"nivel para un ordenador conectado a una red."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Éste es el nivel de seguridad estándar recomendado para una máquina que se\n"
-"utilizará para conectarse a la Internet como cliente."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Ya hay algunas restricciones, y todas las noches se corren más "
-"verificaciones automáticas."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Con este nivel de seguridad, es posible utilizar el sistema como un "
-"servidor.\n"
-"La seguridad es lo suficientemente alta como para usar el sistema como un\n"
-"servidor que acepte conexiones de múltiples clientes. Nota: si su máquina "
-"sólo es un cliente en la Internet, mejor debería elegir un nivel inferior."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Basado en el nivel anterior, pero el sistema está completamente cerrado.\n"
-"Las características de seguridad están al máximo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Elegir el nivel de seguridad"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Nivel de seguridad"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Utilizar libsafe para los servidores"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Una biblioteca que le defiende ante ataques de desbordamiento de búfer y "
-"ataques con cadenas de formato."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"¡Bienvenido a %s, el selector de SO de arranque!\n"
-"\n"
-"Elija un sistema operativo de la lista o espere %d segundos\n"
-"para que arranque el sistema predeterminado.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "¡Bienvenido a GRUB, el selector de SO de arranque!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use las teclas %c y %c para seleccionar una entrada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pulse intro para iniciar el SO elegido, pulse 'e' para editar"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "los comandos antes de iniciar, o pulse 'c' para una linea de comandos."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Se va a iniciar la entrada resaltada en %d segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "no hay espacio suficiente en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escritorio"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menú inicio"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "No puede instalar el cargador de arranque en una partición %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "todavía no está implementada la ayuda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuración del estilo de arranque"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Archivo"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Archivo/_Salir"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>S"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor categorizante de estilo nuevo"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor de estilo nuevo"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor tradicional Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Iniciar Aurora en el momento del arranque"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo de Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modo de Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"En este momento está usando %s como gestor de arranque.\n"
-"Haga click sobre configurar para lanzar el asistente de configuración."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo del sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lanzar el sistema X-Window al comenzar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "No, no deseo entrada automática"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sí, deseo entrada automática con este (usuario, escritorio)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Aceptar"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "¡no se puede abrir /etc/inittab para lectura: %s !"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "No se pueden realizar instantáneas de pantalla antes del particionado"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Luego de la instalación estarán disponibles las instantáneas de pantalla en %"
-"s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Bélgica"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "República Checa"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemania"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grecia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Noruega"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suecia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Estados Unidos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Por favor, haga primero una copia de seguridad de sus datos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "¡Lea con cuidado!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si piensa usar aboot, no olvide dejar espacio libre (2048 sectores es\n"
-"suficiente) al principio del disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Error"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Asistente"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Elija una acción"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tiene una partición FAT de gran tamaño\n"
-"(generalmente usada por DOS/Windows de MicroSoft).\n"
-"Le sugiero que primero cambie el tamaño de la misma\n"
-"(para eso haga clic sobre ella, y luego sobre \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Por favor, haga clic sobre una partición"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalles"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Sistema de. archivos. con journal"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercambio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vacío"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Otros"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sistemas de archivos:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crear"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use \"%s\" en su lugar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Borrar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use \"Desmontar\" primero"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Se perderán todos los datos de la partición %s después de cambiar su tipo"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Elija una partición"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Elija otra partición"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Salir"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Cambiar al modo experto"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Cambiar al modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Deshacer"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "¿Seguir adelante?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Salir sin grabar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "¿Salir del programa sin grabar la tabla de particiones?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¿Desea guardar las modificaciones en /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Asignación automática"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Borrar todas"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Información del disco rígido"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Todas las particiones primarias están usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "No se pueden agregar más particiones"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por favor, para tener más particiones borre alguna para poder crear una "
-"partición extendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Guardar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Restaurar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Rescatar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Volver a cargar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Montaje automático de dispositivos extraíbles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Elija un archivo"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La tabla de particiones de respaldo no tiene\n"
-"el mismo tamaño.  ¿Desea continuar de todas formas?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advertencia"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inserte un disquete en la unidad\n"
-"Se perderán todos los datos del disquete"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tratando de rescatar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Información detallada"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punto de montaje"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opciones"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Desplazar"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatear"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Añadir al RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Añadir al LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Quitar del RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Quitar del LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar el RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crear una partición nueva"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector de comienzo: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamaño en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo de sistema de. archivos: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punto de montaje: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "¿Borrar el archivo de loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Cambiar el tipo de partición"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "¿Qué sistema de archivos desea?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Cambiando de ext2 a ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¿Donde desea montar el archivo de loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¿Dónde desea montar el dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No se puede deseleccionar el punto de montaje ya que esta partición\n"
-"se usa para un montaje en loopback.\n"
-"Quite el montaje de loopback primero"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando los límites del sistema de archivos FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta partición no es redimensionable"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Debería hacer una copia de seguridad de todos los datos de esta partición"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Se perderán todos los datos de la partición %s tras cambiar su tamaño"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Eligiendo el tamaño nuevo"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Tamaño nuevo en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "¿A qué disco desea desplazarla?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "¿A qué sector desea desplazarla?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Desplazando"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Desplazando una partición..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Elegir un RAID existente al que añadir"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nuevo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Elegir un LVM existente al que añadir"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "¿nombre de LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Esta partición no puede usarse para el loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nombre del archivo de loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Indique el nombre de un archivo"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"El archivo ya lo utiliza otro dispositivo loopback.\n"
-"Elija otro archivo, por favor"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "El archivo ya existe. ¿Desea usarlo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opciones de montaje"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Varios"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamaño de los bloques"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Cuidado: esta operación es peligrosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "¿Qué tipo de particionamiento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Disculpe, pero no se permite la creación de una partición /boot tan lejos\n"
-"en el disco (en un cilindro > 1024). Puede usar lilo LILO (y es probable "
-"que\n"
-"no funcione), o bien no utiliza LILO (y entonces no necesita /boot)"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partición que escogió para usar como raíz (/) está físicamente ubicada\n"
-"después del 1024º cilindro del disco rígido, y no tiene partición /boot.\n"
-"Si piensa usar el cargador de arranque LILO, tenga en cuenta que tiene\n"
-"que añadir una partición /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Eligió una partición RAID en software como partición raíz (/).\n"
-"Ningún cargador de arranque es capaz de manejarlo sin una partición /boot.\n"
-"Así que tenga en cuenta que tiene que añadir una partición /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "¡Se escribirá al disco la tabla de particiones de la unidad %s!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Necesita reiniciar el equipo para que la modificación tenga efecto"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Se perderán todos los datos de la partición %s después de formatearla"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formateando"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formateando el archivo de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formateando la partición %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Ocultar archivos"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Mover los archivos a la nueva partición"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"El directorio %s ya tiene algunos datos\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Moviendo los archivos a la nueva partición"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copiando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Borrando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partición %s ahora se conoce como %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra DOS: %s (simplemente una adivinanza)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nombre: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Comienzo: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaño: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindros %d a %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "No formateado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Archivo(s) de loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partición predeterminada de arranque\n"
-"    (para arranque de MS-DOS, no para lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamaño de los bloques %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos-RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nombre del archivo de loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es probable que esta partición sea\n"
-"una partición de Controlador, probablemente\n"
-"debería dejarla como está.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta partición especial de Bootstrap\n"
-"es para el arranque\n"
-"dual de su sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaño: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometría: %s cilindros, %s cabezas, %s sectores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos-LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de la tabla de particiones: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "en el bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opciones: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Clave de cifrado del sistema de archivos"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Elija la clave de cifrado de su sistema de archivos"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Esta clave de cifrado es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Las claves de cifrado no coinciden"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Clave de cifrado"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Clave de cifrado (otra vez)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Cambiar tipo"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Por favor, haga clic sobre un medio"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Buscar servidores"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formateo de %s falló"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "No sé cómo formatear %s en el tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "falló el montaje de la partición %s en el directorio %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck falló con código de salida %d o señal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "con /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No se puede usar JFS para particiones menores de 32MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No se puede usar ReiserFS para particiones menores de 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Los puntos de montaje deben comenzar con una /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ya existe una partición con el punto de montaje %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No puede usar un Volumen Lógico LVM para el punto de montaje %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio debería permanecer dentro del sistema de archivos raíz"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necesita un sistema de archivos verdadero (ext2, reiserfs) para este punto "
-"de montaje\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"No puede usar un sistema de archivos cifrado para el punto de montaje %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "No hay espacio libre suficiente para la asignación automática"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nada para hacer"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Error al abrir %s para escribir: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocurrió un error - no se encontró ningún dispositivo válido para crear los "
-"nuevos sistemas de archivos. Por favor, verifique su equipo para saber la "
-"razón de este fallo"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "¡No tiene ninguna partición!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
-"puede tener sus preferencias propias, sus archivos propios, y así\n"
-"sucesivamente. Puede leer la \"Guía del Usuario\" para aprender más. Pero,\n"
-"a diferencia de \"root\", que es el administrador, los usuarios que agregue\n"
-"aquí no podrán cambiar nada excepto su configuración y sus archivos\n"
-"propios. Tendrá que crear al menos un usuario no privilegiado para Usted\n"
-"mismo. Esa cuenta es donde debería conectarse para el uso diario. Aunque es\n"
-"muy práctico ingresar como \"root\" diariamente, ¡también puede ser muy\n"
-"peligroso! El error más leve podría significar que su sistema deje de\n"
-"funcionar. Si comete un error serio como usuario no privilegiado, sólo\n"
-"puede llegar a perder algo de información, pero no todo el sistema.\n"
-"\n"
-"Primero tendrá que ingresar su nombre real. Esto no es obligatorio, por\n"
-"supuesto ya que, en realidad, puede ingresar lo que desee. DrakX tomará\n"
-"entonces la primer palabra que ingresó y la copiará al campo \"Nombre de\n"
-"usuario\". Este es el nombre que este usuario en particular usará para\n"
-"ingresar al sistema. Lo puede cambiar. Luego tendrá que ingresar una\n"
-"contraseña aquí. La contraseña de un usuario no privilegiado (regular) no\n"
-"es tan crucial como la de \"root\" desde el punto de vista de la seguridad,\n"
-"pero esto no es razón alguna para obviarla - después de todo, son sus\n"
-"archivos los que están en riesgo.\n"
-"\n"
-"Si hace clic sobre \"Aceptar usuario\", entonces puede agregar tantos como\n"
-"desee. Agregue un usuario para cada uno de sus amigos: por ejemplo su padre\n"
-"o su hermana. Cuando haya terminado de agregar todos los usuarios que\n"
-"desee, seleccione \"Hecho\".\n"
-"\n"
-"Hacer clic sobre el botón \"Avanzadas\" le permite cambiar el \"shell\"\n"
-"predeterminado para ese usuario (bash por defecto)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Arriba se listan las particiones Linux existentes que se detectaron en su\n"
-"disco rígido. Puede mantener las elecciones hechas por el asistente, las\n"
-"mismas son buenas para las instalaciones más comunes. Si hace cambios, al\n"
-"menos debe definir una partición raíz (\"/\"). No elija una partición muy\n"
-"pequeña o no podrá instalar software suficiente. Si desea almacenar sus\n"
-"datos en una partición separada, también puede necesitar crear una\n"
-"partición para \"/home\" (sólo es posible si tiene más de una partición\n"
-"Linux disponible).\n"
-"\n"
-"Cada partición se lista como sigue: \"Nombre\", \"Capacidad\".\n"
-"\n"
-"\"Nombre\" está estructurado: \"tipo de disco rígido\", \"número de disco\n"
-"rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rígido maestro en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"b\" significa \"disco rígido esclavo en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"c\" significa \"disco rígido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rígido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"La instalación Mandrake Linux se divide en varios CD-ROMs. DrakX sabe si un\n"
-"paquete seleccionado se encuentra en otro CD y expulsará el CD corriente y\n"
-"le pedirá que inserte uno diferente cuando sea necesario."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ahora es el momento de especificar los programas que desea instalar en su\n"
-"sistema. Hay miles de paquetes disponibles para Mandrake Linux, y no se\n"
-"supone que los conozca a todos de memoria.\n"
-"\n"
-"Si está realizando una instalación estándar desde un CD-ROM, primero se le\n"
-"pedirá que especifique los CDs que tiene (sólo en modo Experto). Verifique\n"
-"las etiquetas de los CDs y marque las casillas que corresponden a los que\n"
-"tiene disponibles para la instalación. Haga clic sobre \"Aceptar\" cuando\n"
-"esté listo para continuar.\n"
-"\n"
-"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
-"su máquina. Los grupos en sí mismos están clasificados en cuatro secciones:\n"
-"\n"
-" * \"Estación de trabajo\": si planea utilizar su máquina como una estación\n"
-"de trabajo, seleccione uno o más grupos correspondientes.\n"
-"\n"
-" * \"Desarrollo\": si la máquina se utilizará para programación, elija\n"
-"el(los) grupo(s) deseado(s).\n"
-"\n"
-" * \"Servidor\": finalmente, si se pretende usar la máquina como un "
-"servidor\n"
-"aquí puede seleccionar los servicios más comunes que desea que se instalen\n"
-"en la misma.\n"
-"\n"
-" * \"Entorno gráfico\": seleccione aquí su entorno gráfico preferido. Si\n"
-"desea tener una estación de trabajo gráfica, ¡seleccione al menos uno!\n"
-"\n"
-"Si mueve el cursor del ratón sobre el nombre de un grupo se mostrará un\n"
-"pequeño texto explicativo acerca de ese grupo. Si deselecciona todos los\n"
-"grupos cuando está realizando una instalación regular (es decir, no una\n"
-"actualización), aparecerá un diálogo que propone opciones diferentes para\n"
-"una instalación mínima:\n"
-"\n"
-" * \"Con X\": instala la menor cantidad de paquetes posible para tener un\n"
-"escritorio gráfico que funcione;\n"
-"\n"
-" * \"Con documentación básica\": instala el sistema base más algunos\n"
-"utilitarios básicos y la documentación de los mismos. Esta instalación es\n"
-"adecuada para configurar un servidor;\n"
-"\n"
-" * \"Instalación realmente mínima\": instalará el mínimo necesario estricto\n"
-"para obtener un sistema Linux que funciona, sólo en línea de comandos. Esta\n"
-"instalación ocupa alrededor de 65Mb.\n"
-"\n"
-"Puede marcar la opción \"Selección por paquetes individuales\" que es útil\n"
-"si está familiarizado con los paquetes que se ofrecen o si desea tener un\n"
-"control total sobre lo que se instalará.\n"
-"\n"
-"Si inició la instalación en el modo \"Actualización\", puede deseleccionar\n"
-"todos los grupos para evitar instalar cualquier paquete nuevo. Esto es útil\n"
-"para reparar o actualizar un sistema existente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalmente, dependiendo de si Usted elige seleccionar los paquetes\n"
-"individuales o no, se le presentará un árbol que contiene todos los\n"
-"paquetes clasificados por grupos y sub-grupos. Mientras navega por el\n"
-"árbol, puede seleccionar grupos enteros, sub-grupos, o simplemente\n"
-"paquetes.\n"
-"\n"
-"Tan pronto como selecciona un paquete en el árbol, aparece una descripción\n"
-"del mismo sobre la derecha. Cuando ha finalizado con su selección, haga\n"
-"clic sobre el botón \"Instalar\" que lanzará el proceso de instalación.\n"
-"Dependiendo de la velocidad de su hardware y de la cantidad de paquetes que\n"
-"se deben instalar, el proceso puede tardar un rato en completarse. En la\n"
-"pantalla se muestra una estimación del tiempo necesario para completar la\n"
-"instalación para ayudarlo a considerar si tiene tiempo suficiente par\n"
-"disfrutar una taza de café.\n"
-"\n"
-"!! Si ha sido seleccionado un paquete de servidor ya sea intencionalmente o\n"
-"porque era parte de un grupo completo, se le pedirá que confirme que\n"
-"realmente desea que se instalen esos servidores. Bajo Mandrake Linux,\n"
-"cualquier servidor instalado se inicia de manera predeterminada al momento\n"
-"del arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
-"momento en que se publicó la distribución, puede ocurrir que más tarde se\n"
-"descubran vulnerabilidades en la seguridad. En particular, si no sabe que\n"
-"es lo que se supone que hace un servicio o la razón por la cual se está\n"
-"instalando, entonces haga clic sobre \"No\". Si hace clic sobre \"Sí\" se\n"
-"instalarán todos los servicios listados y de manera predeterminada los\n"
-"mismos arrancarán automáticamente. !!\n"
-"\n"
-"La opción \"Dependencias automáticas\" simplemente deshabilita el diálogo\n"
-"de advertencia cuando el instalador selecciona automáticamente un paquete.\n"
-"Esto ocurre porque se determina que es necesario para satisfacer una\n"
-"dependencia con otro paquete para poder completar la instalación\n"
-"satisfactoriamente.\n"
-"\n"
-"El pequeño icono del disquete al final de la lista le permite cargar la\n"
-"lista de paquetes elegida durante una instalación previa. Haga clic sobre\n"
-"este icono y se le pedirá que inserte un disquete creado con anterioridad\n"
-"al final de otra instalación. Vea el segundo consejo del último paso para\n"
-"información sobre como crear dicho disquete."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Ahora se le propone configurar su conexión de red/Internet. Si desea\n"
-"conectar su computadora a la Internet o a una red de área local, haga clic\n"
-"sobre \"Aceptar\". Se lanzará la detección automática de dispositivos de\n"
-"red y módems. Si esta detección falla, quite la marca de la casilla \"Usar\n"
-"detección automática\" la próxima vez. También puede elegir no configurar\n"
-"la red, o hacerlo más tarde; en ese caso simplemente haga clic sobre el\n"
-"botón \"Cancelar\".\n"
-"\n"
-"Los tipos de conexión disponibles son: módem tradicional, módem RDSI\n"
-"(ISDN), conexión ADSL, cable módem, y finalmente una simple conexión LAN\n"
-"(Ethernet).\n"
-"\n"
-"Aquí no entraremos en detalle en cada configuración. Simplemente debe\n"
-"asegurarse que su Proveedor de Servicios de Internet o su administrador del\n"
-"sistema le proporcionaron todos los parámetros de configuración.\n"
-"\n"
-"Puede consultar el capítulo de \"Guía del Usuario\" sobre las conexiones a\n"
-"la Internet para detalles acerca de la configuración, o simplemente esperar\n"
-"hasta que su sistema esté instalado y usar el programa que se describe aquí\n"
-"para configurar su conexión.\n"
-"\n"
-"Si desea configurar la red más tarde, luego de la instalación, o si ha\n"
-"finalizado de configurar su conexión de red, haga clic sobre \"Cancelar\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ahora puede elegir los servicios que desea iniciar durante el arranque.\n"
-"\n"
-"Aquí se presentan todos los servicios disponibles con la instalación\n"
-"corriente. Debe revisarlos con cuidado y quitar la marca de aquellos que no\n"
-"siempre son necesarios al arrancar.\n"
-"\n"
-"Puede obtener un pequeño texto explicativo acerca de un servicio\n"
-"seleccionando un servicio específico. Sin embargo, si no está seguro si un\n"
-"servicio es útil o no, es más seguro dejar el comportamiento\n"
-"predeterminado.\n"
-"\n"
-"!! Tenga mucho cuidado en esta etapa si pretende usar su máquina como un\n"
-"servidor: probablemente no deseará arrancar servicios que no necesita. Por\n"
-"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
-"en un servidor. En general, seleccione sólo aquellos servicios que\n"
-"realmente necesita. !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n"
-"Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n"
-"horario que Usted seleccionó. Sin embargo, es posible desactivar esto\n"
-"quitando la marca de la casilla \"Reloj interno puesto a GMT\" de forma tal\n"
-"que el reloj de hardware es el mismo que el del sistema. Esto es útil\n"
-"cuando la máquina alberga otro sistema operativo como Windows.\n"
-"\n"
-"La opción \"Sincronización automática de hora (usando NTP)\" regulará\n"
-"automáticamente el reloj conectándose a un servidor remoto de la hora en la\n"
-"Internet. Elija un servidor ubicado cerca suyo en la lista que se presenta.\n"
-"Por supuesto debe tener una conexión con la Internet funcionando para que\n"
-"esta característica funcione. La misma instalará en su máquina un servidor\n"
-"de la hora que, opcionalmente, puede ser utilizado por otras máquinas en su\n"
-"red local."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (por X Window System) es el corazón de la interfaz gráfica de GNU/Linux\n"
-"en el que se apoyan todos los entornos gráficos (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) que se incluyen con Mandrake Linux. En esta sección,\n"
-"DrakX intentará configurar a X automáticamente.\n"
-"\n"
-"Es extremadamente raro que esto falle, a menos que el hardware sea muy\n"
-"antiguo (o muy nuevo). Si no falla, arrancará X automáticamente con la\n"
-"mejor resolución posible dependiendo del tamaño de su monitor. Luego\n"
-"aparecerá una ventana que le pregunta si la puede ver.\n"
-"\n"
-"Si está haciendo una instalación en modo \"Experto\", ingresará al\n"
-"asistente de configuración de X. Para más información sobre este asistente\n"
-"vea la sección correspondiente del manual.\n"
-"\n"
-"Si puede ver el mensaje y responde \"Sí\", entonces DrakX continuará con el\n"
-"paso siguiente. Si no puede ver el mensaje, simplemente significa que la\n"
-"configuración no era la correcta y la prueba terminará automáticamente\n"
-"luego de 10 segundos, restaurando la pantalla."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"La primera vez que intenta la configuración de X Usted puede no estar muy\n"
-"satisfecho con el resultado (la pantalla es muy pequeña, está corrida hacia\n"
-"la izquierda o hacia la derecha...). Es por esto que, incluso si X arranca\n"
-"correctamente, DrakX le preguntará si la configuración le conviene. También\n"
-"propondrá cambiarla mostrando una lista de modos válidos que pudo\n"
-"encontrar, y le pedirá que seleccione alguno.\n"
-"\n"
-"Como último recurso, si todavía no puede hacer que X funcione, elija\n"
-"\"Cambiar la tarjeta gráfica\", seleccione \"Tarjeta no listada\", y cuando\n"
-"se le pregunte acerca de que servidor desea elija \"FBDev\". Esta es una\n"
-"opción a prueba de fallos que funciona con cualquier tarjeta gráfica\n"
-"moderna. Luego elija \"Probar nuevamente\" para estar seguro que funciona."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalmente, se le preguntará si desea ver la interfaz gráfica en el\n"
-"arranque. Note que esta pregunta se le formula incluso si eligió no probar\n"
-"la configuración. Obviamente, querrá responder \"No\" si su máquina va a\n"
-"actuar como un servidor, o si no tuvo éxito con la configuración de la\n"
-"pantalla."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Usted\n"
-"puede acceder al mismo arrancando desde el CD-ROM, presionando la tecla\n"
-">>F1<< durante el arranque y tecleando >>rescue<< en el prompt. Pero en\n"
-"caso que su computadora no pueda arrancar desde el CD-ROM, Usted debería\n"
-"recurrir a este paso al menos en dos situaciones:\n"
-"\n"
-" * cuando instala el cargador de arranque, DrakX sobreescribirá el sector "
-"de\n"
-"arranque (MBR) de su disco principal (a menos que esté utilizando otro\n"
-"administrador de arranque) de forma tal que pueda iniciar o bien Windows o\n"
-"bien GNU/Linux (asumiendo que tiene Windows en su sistema). Si necesita\n"
-"volver a instalar Windows, el proceso de instalación de Microsoft\n"
-"sobreescribirá el sector de arranque, y entonces ¡Usted no podrá iniciar\n"
-"GNU/Linux!\n"
-"\n"
-" * si surge un problema y Usted no puede iniciar GNU/Linux desde el disco\n"
-"rígido, este disquete será la única manera de iniciar GNU/Linux. El mismo\n"
-"contiene una buena cantidad de herramientas del sistema para restaurar un\n"
-"sistema que colapsó debido a una falla de energía, un error de tecleo\n"
-"infortunado, un error en una contraseña, o cualquier otro motivo.\n"
-"\n"
-"Cuando haga clic sobre este paso se le pedirá que inserte un disquete\n"
-"dentro de la disquetera. El disquete que insertará debe estar vacío o\n"
-"contener datos que no necesite. No tendrá que formatearlo ya que DrakX\n"
-"sobreescribirá el disquete por completo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Ahora necesita elegir el lugar de su disco rígido donde se instalará su\n"
-"sistema operativo Mandrake Linux. Si su disco rígido está vacío o si un\n"
-"sistema operativo existente está utilizando todo el espacio disponible,\n"
-"necesitará particionar el disco. Básicamente, particionar un disco rígido\n"
-"consiste en dividirlo lógicamente para crear espacio para instalar su\n"
-"sistema Mandrake Linux nuevo.\n"
-"\n"
-"Debido a que los efectos del particionado por lo general son irreversibles,\n"
-"el particionado puede ser intimidante y estresante si Usted es un usuario\n"
-"inexperto. Por fortuna, hay un asistente que simplifica este proceso. Antes\n"
-"de comenzar, por favor consulte el manual y tómese su tiempo.\n"
-"\n"
-"Si está corriendo la instalación en modo Experto, ingresará a DiskDrake, la\n"
-"herramienta de particionado de Mandrake Linux, que le permite un ajuste\n"
-"fino de sus particiones. Vea la sección DiskDrake en la \"Guía del\n"
-"Usuario\". Desde la interfaz de instalación, puede utilizar los asistentes\n"
-"como se describe aquí haciendo clic sobre el botón \"Asistente\" del\n"
-"diálogo.\n"
-"\n"
-"Si ya se han definido particiones, ya sea de una instalación previa o por\n"
-"medio de otra herramienta de particionado, simplemente seleccione esas para\n"
-"instalar su sistema Linux.\n"
-"\n"
-"Si no hay particiones definidas, necesitará crearlas usando el asistente.\n"
-"Dependiendo de la configuración de su disco rígido, están disponibles\n"
-"varias opciones:\n"
-"\n"
-" * \"Usar espacio libre\": esta opción simplemente llevará a un "
-"particionado\n"
-"automático de su(s) disco(s) vacío(s). No se le pedirán más detalles ni se\n"
-"le formularán más preguntas.\n"
-"\n"
-" * \"Usar partición existente\": el asistente ha detectado una o más\n"
-"particiones Linux existentes en su disco rígido. Si desea utilizarlas,\n"
-"elija esta opción.\n"
-"\n"
-" * \"Usar el espacio libre en la partición Windows\": si MicrosoftWindows\n"
-"está instalado en su disco rígido y ocupa todo el espacio disponible en el\n"
-"mismo, Usted tiene que liberar espacio para los datos de Linux. Para\n"
-"hacerlo, puede borrar su partición y datos MicrosoftWindows (vea las\n"
-"soluciones \"Borrar el disco completo\" o \"Modo experto\") o cambie el\n"
-"tamaño de su partición Windows. El cambio de tamaño se puede realizar sin\n"
-"la pérdida de datos, siempre y cuando Usted ha desfragmentado con\n"
-"anterioridad la partición Windows. También se recomienda hacer una copia de\n"
-"respaldo de sus datos.. Se recomienda esta solución si desea utilizar tanto\n"
-"Mandrake Linux como MicrosoftWindows en la misma computadora.\n"
-"\n"
-"   Antes de elegir esta opción, por favor comprenda que después de este\n"
-"procedimiento, el tamaño de su partición MicrosoftWindows será más pequeño\n"
-"que ahora. Tendrá menos espacio bajo MicrosoftWindows para almacenar sus\n"
-"datos o instalar software nuevo.\n"
-"\n"
-" * \"Borrar el disco entero\": si desea borrar todos los datos y todas las\n"
-"particiones presentes en su disco rígido y reemplazarlas con su nuevo\n"
-"sistema Mandrake Linux, elija esta opción. Tenga cuidado con esta solución\n"
-"ya que no podrá revertir su elección después de confirmarla.\n"
-"\n"
-"   !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
-"\n"
-" * \"Quitar Windows\": simplemente esto borrará todo en el disco y "
-"comenzará\n"
-"particionando todo desde cero. Se perderán todos los datos en su disco.\n"
-"\n"
-"   !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
-"\n"
-" * \"Modo experto\": elija esta opción si desea particionar manualmente su\n"
-"disco rígido. Tenga cuidado - esta es una elección potente pero peligrosa.\n"
-"Puede perder todos sus datos con facilidad. Por lo tanto, no elija esta\n"
-"opción a menos que sepa lo que está haciendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Aquí tiene. Ahora la instalación está completa y su sistema GNU/Linux está\n"
-"listo para ser utilizado. Simplemente haga clic sobre \"Aceptar\" para\n"
-"volver a arrancar el sistema. Puede iniciar GNU/Linux o Windows, cualquiera\n"
-"que prefiera (si está usando el arranque dual) tan pronto como su máquina\n"
-"haya vuelto a arrancar.\n"
-"\n"
-"El botón \"Avanzadas\" (sólo en modo Experto) le muestra dos botones más\n"
-"para:\n"
-"\n"
-" * \"Generar un disquete de instalación automática\": para crear un "
-"disquete\n"
-"de instalación que realizará una instalación completa sin la asistencia de\n"
-"un operador, similar a la instalación que ha configurado recién.\n"
-"\n"
-"   Note que hay dos opciones diferentes disponibles después de hacer clic\n"
-"sobre el botón:\n"
-"\n"
-"    * \"Reproducir\". Esta es una instalación parcialmente automatizada ya "
-"que\n"
-"la etapa de particionado (y sólo esta etapa) permanece interactiva.\n"
-"\n"
-"    * \"Automatizada\". Instalación completamente automatizada: el disco "
-"rígido\n"
-"se sobreescribe por completo, y se pierden todos los datos.\n"
-"\n"
-"   Esta característica es muy útil cuando se instala una cantidad grande de\n"
-"máquinas similares. Vea la sección Auto install (en inglés) en nuestro\n"
-"sitio web.\n"
-"\n"
-" * \"Guardar selección de paquetes\"(*): guarda la selección de paquetes\n"
-"como se hizo con anterioridad. Luego, cuando haga otra instalación, inserte\n"
-"el disquete en la disquetera y ejecute la instalación yendo a la pantalla\n"
-"de ayuda con [F1], e ingrese >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
-"teclee \"mformat a:\")"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Se debe formatear cualquier partición nueva que ha sido definida para que\n"
-"se pueda utilizar (formatear significa crear un sistema de archivos).\n"
-"\n"
-"Puede desear volver a formatear algunas particiones ya existentes para\n"
-"borrar cualquier dato que pudieran contener. Si así lo desea, por favor\n"
-"seleccione también dichas particiones.\n"
-"\n"
-"Por favor note que no es necesario volver a formatear todas las particiones\n"
-"pre-existentes. Debe volver a formatear las particiones que contienen el\n"
-"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
-"volver a formatear particiones que contienen datos que desea preservar\n"
-"(típicamente \"/home\").\n"
-"\n"
-"Tenga sumo cuidado cuando selecciona las particiones. Después de formatear,\n"
-"se borrarán todos los datos en las particiones seleccionadas y no podrá\n"
-"recuperarlos en absoluto.\n"
-"\n"
-"Haga clic sobre \"Aceptar\" cuando esté listo para formatear las\n"
-"particiones.\n"
-"\n"
-"Haga clic sobre \"Cancelar\" si desea elegir otra partición para la\n"
-"instalación de su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Haga clic sobre \"Avanzado\" si desea seleccionar las particiones en las\n"
-"que se buscarán bloques defectuosos en el disco."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"En este momento se está instalando su sistema operativo Mandrake Linux\n"
-"nuevo. Dependiendo de la cantidad de paquetes que instalará y de la\n"
-"velocidad de su computadora, esta operación puede tomar desde unos pocos\n"
-"minutos hasta una cantidad de tiempo significativa.\n"
-"\n"
-"Por favor, tenga paciencia."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Puede ser que cuando está instalando Mandrake Linux algunos paquetes se\n"
-"hayan actualizado desde la publicación inicial. Se pueden haber corregido\n"
-"algunos errores, y solucionado problemas de seguridad. Para permitir que\n"
-"Usted se beneficie de estas actualizaciones, ahora se le propone\n"
-"transferirlas desde la Internet. Elija \"Sí\" si tiene funcionando una\n"
-"conexión con la Internet, o \"No\" si prefiere instalar los paquetes\n"
-"actualizados más tarde.\n"
-"\n"
-"Si elije \"Sí\" se muestra una lista de lugares desde los que se pueden\n"
-"obtener las actualizaciones. Elija el más cercano a Usted. Luego aparece un\n"
-"árbol de selección de paquetes: revise la selección y presione \"Instalar\"\n"
-"para transferir e instalar los paquetes seleccionados, o \"Cancelar\" para\n"
-"abortar."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Antes de continuar, debería leer cuidadosamente los términos de la\n"
-"licencia. Los mismos cubren a toda la distribución Mandrake Linux, y si\n"
-"Usted no está de acuerdo con todos los términos en la misma, haga clic\n"
-"sobre el botón \"Rechazar\". Esto terminará la instalación inmediatamente.\n"
-"Para continuar con la instalación, haga clic sobre el botón \"Aceptar\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"En este punto, es tiempo de elegir el nivel de seguridad deseado para su\n"
-"máquina. Como regla general, cuanto más expuesta está la máquina, y cuantos\n"
-"más cruciales sean los datos que tenga almacenados el nivel de seguridad en\n"
-"la misma deberá ser más alto. Sin embargo, un nivel de seguridad más alto\n"
-"generalmente se obtiene a expensas de la facilidad de uso. Consulte el\n"
-"capítulo \"msec\" del \"Manual de Referencia\" para obtener más información\n"
-"sobre el significado de dichos niveles.\n"
-"\n"
-"Si no sabe que elegir, mantenga la opción predeterminada."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ahora necesita elegir qué particiones se utilizarán para la instalación de\n"
-"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
-"por una instalación previa de GNU/Linux o con otra herramienta de\n"
-"particionado, puede utilizarlas. En caso contrario se deben definir\n"
-"particiones en el disco rígido.\n"
-"\n"
-"Para crear particiones, primero debe seleccionar un disco rígido. Puede\n"
-"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
-"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
-"SCSI y así sucesivamente.\n"
-"\n"
-"Para particionar el disco rígido seleccionado, puede utilizar estas\n"
-"opciones:\n"
-"\n"
-" * \"Borrar todo\": esta opción borra todas las particiones sobre el disco\n"
-"seleccionado.\n"
-"\n"
-" * \"Asignación automática\": esta opción le permite crear particiones\n"
-"\"Ext2\" y swap automáticamente en el espacio libre de su disco rígido.\n"
-"\n"
-" * \"Rescatar tabla de particiones\": si su tabla de particiones está\n"
-"dañada, puede intentar recuperarla usando esta opción. Por favor, tenga\n"
-"cuidado y recuerde que puede fallar.\n"
-"\n"
-" * \"Más\": le da acceso a características adicionales:\n"
-"\n"
-"    * \"Guardar tabla de particiones\": guarda la tabla de particiones en "
-"un\n"
-"disquete. Útil para recuperar la tabla de particiones más adelante en caso\n"
-"que sea necesario. Es altamente recomendable realizar este paso.\n"
-"\n"
-"    * \"Recuperar tabla de particiones\": esta opción le permitirá "
-"restaurar\n"
-"una tabla de particiones guardada previamente en un disquete.\n"
-"\n"
-"    * \"Rescatar tabla de particiones\": si su tabla de particiones está "
-"dañada\n"
-"puede intentar recuperarla utilizando esta opción. Por favor, tenga cuidado\n"
-"y recuerde que puede fallar.\n"
-"\n"
-"    * \"Volver a cargar\": descarta todos los cambios y carga su tabla de\n"
-"particiones inicial.\n"
-"\n"
-"    * \"Montaje automático de soportes removibles\": si desmarca esta "
-"opción\n"
-"los usuarios estarán forzados a montar y desmontar manualmente los soportes\n"
-"removibles como los disquetes y los CD-ROMs.\n"
-"\n"
-" * \"Asistente\": use esta opción si desea utilizar un asistente para\n"
-"particionar su disco rígido. Se recomienda esto si no tiene un buen\n"
-"conocimiento del particionado.\n"
-"\n"
-" * \"Deshacer\": use esta opción para cancelar sus cambios.\n"
-"\n"
-" * \"Cambiar a modo normal/experto\": permite realizar acciones adicionales\n"
-"sobre las particiones (tipo, opciones, formatear) y brinda más información.\n"
-"\n"
-" * \"Hecho\": cuando ha terminado de particionar su disco rígido, esto\n"
-"guardará sus cambios en el disco.\n"
-"\n"
-"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
-"través de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
-"\n"
-"Cuando se selecciona una partición, puede utilizar:\n"
-"\n"
-" * Ctrl-c para crear una partición nueva (cuando está seleccionada una\n"
-"partición vacía);\n"
-"\n"
-" * Ctrl-d para borrar una partición;\n"
-"\n"
-" * Ctrl-m para configurar el punto de montaje.\n"
-"\n"
-"Para obtener información sobre los distintos tipos de sistemas de archivos\n"
-"disponibles, por favor lea el capítulo acerca de ext2fs del \"Manual de\n"
-"Referencia\".\n"
-"\n"
-"Si está instalando en una máquina PPC, querrá crear una pequeña partición\n"
-"HFS de \"bootstrap\" de al menos 1MB que será utilizada por el cargador de\n"
-"arranque yaboot. Si opta por hacer la partición un poco más grande, digamos\n"
-"50 MB, puede ver que es un lugar útil para almacenar un núcleo y ramdisk\n"
-"alternativos para arrancar en situaciones de emergencia."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Se ha detectado más de una partición MicrosoftWindows en su disco rígido.\n"
-"Por favor, elija aquella a la cual desea cambiarle el tamaño para poder\n"
-"instalar su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Cada partición se lista como sigue: \"Nombre Linux\", \"Nombre Windows\"\n"
-"\"Capacidad\".\n"
-"\n"
-"\"Nombre Linux\" está estructurado: \"tipo de disco rígido\", \"número de\n"
-"disco rígido\", \"número de partición\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rígido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"Número de disco rígido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rígido maestro en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"b\" significa \"disco rígido esclavo en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"c\" significa \"disco rígido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rígido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc.\n"
-"\n"
-"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
-"primer disco o partición se denomina \"C:\")."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor, tenga paciencia. Esta operación puede tomar varios minutos."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ahora necesita saber si desea realizar una instalación por defecto\n"
-"(\"Recomendada\") o si desea tener un control mayor (\"Experto\"). También\n"
-"puede elegir realizar una instalación nueva o una actualización de un\n"
-"sistema Mandrake Linux existente:\n"
-"\n"
-" * \"Instalar\": el sistema anterior se borrará por completo. De hecho,\n"
-"dependiendo de lo que su máquina contiene actualmente, podrá mantener\n"
-"algunas particiones antiguas (Linux u otras) sin cambios;\n"
-"\n"
-" * \"Actualización\": esta clase de instalación le permite simplemente\n"
-"actualizar los paquetes que en este momento están instalados en su sistema\n"
-"Mandrake Linux. La misma mantiene las particiones corrientes de sus discos\n"
-"así como también las configuraciones de usuarios. Todos los otros pasos de\n"
-"instalación permanecen disponibles con respecto a la instalación simple;\n"
-"\n"
-" * \"Sólo actualizar paquetes\": esta clase completamente nueva le permite\n"
-"actualizar un sistema Mandrake Linux existente a la vez que mantiene todas\n"
-"las configuraciones del sistema sin cambios. También es posible añadir\n"
-"paquetes nuevos a la instalación corriente.\n"
-"\n"
-"Las actualizaciones deberían funcionar sin problemas para los sistemas\n"
-"Mandrake Linux comenzando desde la versión \"8.1\".\n"
-"\n"
-"Dependiendo de su conocimiento de GNU/Linux, por favor elija una de los\n"
-"opciones siguientes:\n"
-"\n"
-" * Recomendada: elija esta si nunca ha instalado un sistema operativo\n"
-"GNU/Linux. La instalación será muy fácil y sólo se le formularán unas pocas\n"
-"preguntas;\n"
-"\n"
-" * Experto: si tiene un conocimiento bueno de GNU/Linux, puede elegir esta\n"
-"clase de instalación. La instalación experta le permitirá realizar una\n"
-"instalación altamente personalizada. Contestar a algunas de las preguntas\n"
-"puede ser difícil si no tiene un buen conocimiento de GNU/Linux, entonces\n"
-"no elija esto a menos que sepa lo que está haciendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente, DrakX selecciona el teclado adecuado para Usted (dependiendo\n"
-"del idioma que eligió) y Usted ni siquiera verá este paso. Sin embargo,\n"
-"podría no tener un teclado que se corresponde exactamente con su idioma:\n"
-"por ejemplo, si Usted es una persona hispano-parlante que está en Argentina\n"
-"o Méjico, su teclado será un teclado Latinoamericano, pero si está en\n"
-"España será uno Español. En ambos casos, Usted tendrá que volver a este\n"
-"paso de la instalación y elegir un teclado apropiado de la lista.\n"
-"\n"
-"Haga clic sobre el botón \"Más\" para que se le presente la lista completa\n"
-"de los teclados soportados."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Por favor, elija su idioma preferido para la instalación y el uso del\n"
-"sistema.\n"
-"\n"
-"Al hacer clic sobre el botón \"Avanzado\" podrá seleccionar otros idiomas\n"
-"para instalar en su estación de trabajo. Seleccionar otros idiomas\n"
-"instalará los archivos específicos para la documentación del sistema y las\n"
-"aplicaciones. Por ejemplo, si albergará a gente de Francia en su máquina,\n"
-"seleccione Español como idioma principal en la vista de árbol y en la\n"
-"sección avanzada haga clic sobre la estrella gris que corresponde a\n"
-"\"Francés|Francia\".\n"
-"\n"
-"Note que se pueden instalar múltiples idiomas. Una vez que ha seleccionado\n"
-"cualquier idioma adicional haga clic sobre el botón \"Aceptar\" para\n"
-"continuar."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX generalmente detecta la cantidad de botones que tiene su ratón. Si\n"
-"no, asume que Usted tiene un ratón de dos botones y lo configurará para que\n"
-"emule el tercer botón. DrakX sabrá automáticamente si es un ratón PS/2,\n"
-"serie o USB.\n"
-"\n"
-"Si desea especificar un tipo de ratón diferente, seleccione el tipo\n"
-"apropiado de la lista que se proporciona.\n"
-"\n"
-"Si elije un ratón distinto al predeterminado, se le presentará una pantalla\n"
-"de prueba. Use los botones y la rueda para verificar que la configuración\n"
-"es correcta. Si el ratón no está funcionando correctamente, presione la\n"
-"barra espaciadora o [Intro] para \"Cancelar\" y vuelva a elegir."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Por favor seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n"
-"bajo Windows se denomina \"ttyS0\" bajo GNU/Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Este es el punto de decisión más crucial para la seguridad de su sistema\n"
-"GNU/Linux: tendrá que ingresar la contraseña de \"root\". \"root\" es el\n"
-"administrador del sistema y es el único autorizado a hacer actualizaciones,\n"
-"agregar usuarios, cambiar la configuración general del sistema, etc.\n"
-"Resumiendo, ¡\"root\" puede hacer de todo!. Es por esto que deberá elegir\n"
-"una contraseña que sea difícil de adivinar DrakX le dirá si la que eligió\n"
-"es demasiado fácil. Como puede ver, puede optar por no ingresar una\n"
-"contraseña, pero le recomendamos encarecidamente que ingrese una, aunque\n"
-"sea sólo por una razón: no piense que debido a que Usted arrancó GNU/Linux,\n"
-"sus otros sistemas operativos están seguros contra los errores. Eso no es\n"
-"cierto debido a que \"root\" puede sobrepasar todas las limitaciones y\n"
-"borrar, sin intención, todos los datos que se encuentran en las particiones\n"
-"accediendo a las mismas sin el cuidado suficiente. Es por esto que es\n"
-"importante que sea difícil convertirse en \"root\".\n"
-"\n"
-"La contraseña debería ser una mezcla de caracteres alfanuméricos y tener al\n"
-"menos una longitud de 8 caracteres. Nunca escriba la contraseña de \"root\"\n"
-"eso hace que sea muy fácil comprometer a un sistema.\n"
-"\n"
-"Sin embargo, por favor no haga la contraseña muy larga o complicada debido\n"
-"a que Usted debe poder recordarla sin realizar mucho esfuerzo.\n"
-"\n"
-"La contraseña no se mostrará en la pantalla a medida que Usted la teclee.\n"
-"Por lo tanto, tendrá que teclear la contraseña dos veces para reducir la\n"
-"posibilidad de un error de tecleo. Si ocurre que Usted comete dos veces el\n"
-"mismo error de tecleo, tendrá que utilizar esta contraseña \"incorrecta\"\n"
-"la primera vez que se conecte.\n"
-"\n"
-"En modo experto, se le preguntará si se conectará a un servidor de\n"
-"autenticación, por ejemplo NIS o LDAP.\n"
-"\n"
-"Si su red usa el protocolo LDAP (o NIS) para la autenticación, seleccione\n"
-"\"LDAP\" (o \"NIS\") como autenticación. Si no sabe, pregunte al\n"
-"administrador de su red.\n"
-"\n"
-"Si su computadora no está conectada a alguna red administrada, querrá\n"
-"elegir \"Archivos locales\" para la autenticación."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO y grub son cargadores de arranque para GNU/Linux. Normalmente, esta\n"
-"etapa está completamente automatizada. De hecho, DrakX analiza el sector de\n"
-"arranque del disco y actúa en función de lo que encuentre allí:\n"
-"\n"
-" * si encuentra un sector de arranque de Windows, lo reemplazará con un\n"
-"sector de arranque de grub/LILO de forma tal que Usted pueda arrancar\n"
-"GNU/Linux u otro sistema operativo;\n"
-"\n"
-" * si encuentra un sector de arranque de grub o LILO, lo reemplazará con "
-"uno\n"
-"nuevo;\n"
-"\n"
-"En caso de duda, DrakX mostrará un diálogo con varias opciones.\n"
-"\n"
-" * \"Cargador de arranque a usar\": tiene tres opciones:\n"
-"\n"
-"    * \"LILO con menú gráfico\": si prefiere a LILO con su interfaz "
-"gráfica.\n"
-"\n"
-"    * \"GRUB\": si prefiere a grub (menú de texto).\n"
-"\n"
-"    * \"LILO con menú de texto\": si prefiere a LILO con su interfaz de "
-"texto.\n"
-"\n"
-" * \"Dispositivo de arranque\": en la mayoría de los casos, no cambiará lo\n"
-"predeterminado (\"/dev/hda\"), pero si lo prefiere, el cargador de arranque\n"
-"se puede instalar en el segundo disco rígido (\"/dev/hdb\"), o incluso en\n"
-"un disquete (\"/dev/fd0\").\n"
-"\n"
-" * \"Demora antes de arrancar la imagen predeterminada\": cuando vuelve a\n"
-"arrancar la computadora, esta es la demora que se garantiza al usuario para\n"
-"elegir en el menú del cargador de arranque, una entrada distinta a la\n"
-"predeterminada.\n"
-"\n"
-"!! Tenga presente que si no elige instalar un cargador de arranque\n"
-"(seleccionando \"Cancelar\"), ¡Debe asegurarse que tiene una forma de\n"
-"arrancar a su sistema Mandrake Linux! También debe asegurarse que sabe lo\n"
-"que hace antes de cambiar cualquier opción. !!\n"
-"\n"
-"Haciendo clic sobre el botón \"Avanzadas\" en este diálogo se le ofrecerán\n"
-"muchas opciones avanzadas que están reservadas para el usuario experto.\n"
-"\n"
-"Luego que haya configurado los parámetros generales del cargador de\n"
-"arranque se mostrará la lista de opciones de arranque que estarán\n"
-"disponibles al momento de arrancar.\n"
-"\n"
-"Si hay otro sistema operativo instalado en su máquina, se agregará el mismo\n"
-"automáticamente al menú de arranque. Aquí puede elegir ajustar las opciones\n"
-"existentes. Seleccione una entrada y haga clic sobre \"Modificar\" para\n"
-"cambiar los parámetros de la misma o quitarla; \"Añadir\" crea una entrada\n"
-"nueva; y \"Hecho\" va al paso de instalación siguiente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (el LInux LOader) y grub son cargadores de arranque: permiten arrancar\n"
-"ya sea GNU/Linux como cualquier otro sistema operativo presente en su\n"
-"computadora. Normalmente, estos otros sistemas operativos se detectan e\n"
-"instalan correctamente. Si este no es el caso, puede añadir una entrada a\n"
-"mano en esta pantalla. Tenga cuidado de elegir los parámetros correctos.\n"
-"\n"
-"También puede no desear dar acceso a estos otros sistemas operativos a\n"
-"cualquiera. En ese caso, puede borrar las entradas correspondientes. Pero\n"
-"entonces, ¡necesitará un disquete de arranque para poder arrancar esos\n"
-"otros sistemas operativos!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Debe indicar donde desea colocar la información necesaria para arrancar en\n"
-"GNU/Linux.\n"
-"\n"
-"A menos que sepa exactamente lo que está haciendo, elija \"Primer sector\n"
-"del disco (MBR)\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Aquí seleccionamos un sistema de impresión para que use su computadora.\n"
-"Otros sistemas operativos pueden ofrecerle uno, pero Mandrake Linux le\n"
-"ofrece tres.\n"
-"\n"
-" * \"pdq\"\"print, don't queue\" (imprimir sin poner en cola), es la\n"
-"elección si Usted tiene una conexión directa a su impresora y desea evitar\n"
-"el pánico de los papeles trabados, y no tiene impresora en red alguna.\n"
-"Manejará sólo casos de red muy simples y es algo lento para las redes.\n"
-"Elija \"pdq\" si esta es su luna de miel con GNU/Linux. Después de la\n"
-"instalación puede cambiar sus elecciones ejecutando PrinterDrake desde el\n"
-"Centro de Control Mandrake y eligiendo el modo experto.\n"
-"\n"
-" * \"CUPS\"\"Common Unix Printing System\" (Sistema de Impresión Común de\n"
-"Unix) es excelente imprimiendo en su impresora local y también en la otra\n"
-"punta del planeta. Es simple y puede actuar como servidor o cliente para el\n"
-"sistema de impresión antiguo \"lpd\", por lo que es compatible con los\n"
-"sistemas anteriores. Puede hacer muchas cosas, pero la configuración básica\n"
-"es tan simple como la de \"pdq\". Si necesita que emule a un servidor\n"
-"\"lpd\", debe encender el demonio \"cups-lpd\". Tiene interfaces gráficas\n"
-"para imprimir o elegir las opciones de la impresora.\n"
-"\n"
-" * \"lprNG\"\"line printer daemon New Generation\" (servidor de impresora "
-"de\n"
-"líneas Nueva Generación). Este sistema puede hacer aproximadamente las\n"
-"mismas cosas que los otros, pero imprimirá en impresoras montadas sobre una\n"
-"red Novell, debido a que soporta el protocolo IPX, y puede imprimir\n"
-"directamente a comandos del shell. Si necesita Novell o imprimir a comandos\n"
-"de sin utilizar tuberías, utilice lprNG. De no ser así, se prefiere a CUPS\n"
-"ya que es más simple y es mejor al trabajar sobre redes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ahora detecta cualquier dispositivo IDE presente en su computadora.\n"
-"También buscará una o más tarjetas SCSI PCI en su sistema. Si se encuentra\n"
-"una tarjeta SCSI DrakX instalará el controlador apropiado automáticamente.\n"
-"\n"
-"Debido a que la detección de hardware a veces no detectará alguna pieza de\n"
-"hardware DrakX le pedirá que confirme si tiene una tarjeta SCSI PCI. Haga\n"
-"clic sobre \"Sí\" si sabe que hay una tarjeta SCSI instalada en su máquina.\n"
-"Se le presentará una lista de tarjetas SCSI de la cual elegir. Haga clic\n"
-"sobre \"No\" si no tiene hardware SCSI. Si no está seguro puede verificar\n"
-"la lista de hardware detectado en su máquina seleccionando \"Ver\n"
-"información sobre el hardware\" y haciendo clic sobre \"Aceptar\". Examine\n"
-"la lista de hardware y luego haga clic sobre el botón \"Aceptar\" para\n"
-"volver a la pregunta sobre la interfaz SCSI.\n"
-"\n"
-"Si tiene que seleccionar su adaptador manualmente, DrakX le preguntará si\n"
-"desea especificar opciones para el mismo. Debería permitir que DrakX sondee\n"
-"el hardware buscando las opciones específicas que necesita el hardware para\n"
-"inicializarse. Por lo general esto funciona bien.\n"
-"\n"
-"Si DrakX no puede sondear las opciones que deben pasarse, necesitará\n"
-"proporcionar manualmente las opciones al controlador. Por favor revise la\n"
-"\"Guía del Usuario\" (capítulo 3, sección \"Recopilando información acerca\n"
-"de su hardware\") en busca de consejos para recopilar los parámetros\n"
-"necesarios a partir de la documentación del hardware, desde el sitio web\n"
-"del fabricante (si tiene acceso a la Internet) o desde MicrosoftWindows (si\n"
-"utilizaba este hardware con Windows en su sistema)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Puede agregar entradas adicionales para Yaboot, ya sea para otros sistemas\n"
-"operativos, núcleos alternativos, o para una imagen de arranque de\n"
-"emergencia.\n"
-"\n"
-"Para otros sistemas operativos, la entrada consiste sólo de una etiqueta y\n"
-"la partición raíz.\n"
-"\n"
-"Para Linux, hay algunas opciones posibles:\n"
-"\n"
-" * Etiqueta: esta es simplemente el nombre que deberá teclear en el prompt\n"
-"de yaboot para seleccionar esta opción de arranque.\n"
-"\n"
-" * Imagen: esta debería ser el nombre del núcleo a arrancar. Típicamente,\n"
-"vmlinux o una variación de vmlinux con una extensión.\n"
-"\n"
-" * Raíz: el dispositivo \"root\" o \"/\" para su instalación Linux.\n"
-"\n"
-" * Añadir: la opción de añadir al núcleo se usa bastante sobre el hardware\n"
-"Apple para asistir en la inicialización del hardware de vídeo, o para\n"
-"habilitar la emulación de los botones del ratón con el teclado para los\n"
-"botones 2do y 3ro del ratón que por lo general no tienen los ratones\n"
-"estándar de Apple. Algunos ejemplos son los siguientes:\n"
-"\n"
-"   video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"   video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: esta opción se puede usar o bien para cargar los módulos\n"
-"iniciales, antes que esté disponible el dispositivo de arranque, o bien\n"
-"cargar una imagen de ramdisk para una situación de arranque de emergencia.\n"
-"\n"
-" * Tamaño de Initrd: generalmente el tamaño por defecto del ramdisk es 4096\n"
-"bytes. Puede usar esta opción si necesita asignar un ramdisk mayor.\n"
-"\n"
-" * Lectura-Escritura: normalmente la partición \"root\" se levanta en modo\n"
-"de sólo lectura, para permitir una verificación del sistema de archivos\n"
-"antes que el sistema se levante por completo. Aquí puede cambiar esta\n"
-"opción.\n"
-"\n"
-" * NoVideo: en caso que el hardware de vídeo de Apple sea excepcionalmente\n"
-"problemático, puede seleccionar esta opción para arrancar en el modo\n"
-"\"novideo\", con soporte nativo para el frame-buffer.\n"
-"\n"
-" * Predeterminada: selecciona a esta entrada como la opción Linux por\n"
-"defecto, que se puede elegir simplemente presionando [Intro] en el prompt\n"
-"de Yaboot. Esta entrada también se marcará con un \"*\", si presiona [Tab]\n"
-"para ver las selecciones del arranque."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
-"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
-"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
-"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
-"esta pantalla. Tenga cuidado de elegir los parámetros correctos.\n"
-"\n"
-"Las opciones principales de Yaboot son:\n"
-"\n"
-" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
-"prompt de arranque.\n"
-"\n"
-" * Dispositivo de arranque: indica donde desea colocar la información\n"
-"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
-"partición bootstrap con anterioridad para contener esta información.\n"
-"\n"
-" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
-"disponibles con Yaboot. La primera se mide en segundos y aquí puede elegir\n"
-"entre CD, arranque OF, MacOS o Linux.\n"
-"\n"
-" * Demora de arranque del núcleo: esta demora es similar a la demora de\n"
-"arranque de LILO. Luego de seleccionar Linux, tendrá esta demora en décimas\n"
-"de segundo antes que se seleccione su descripción del núcleo\n"
-"predeterminada.\n"
-"\n"
-" * ¿Habilitar arranque desde el CD?: marcando esta opción Usted puede "
-"elegir\n"
-"\"C\" para el CD en el primer prompt de arranque.\n"
-"\n"
-" * ¿Habilitar arranque OF?: marcando esta opción Usted puede elegir \"N\"\n"
-"para Open Firmware en el primer prompt de arranque.\n"
-"\n"
-" * SO predeterminado: puede seleccionar qué sistema operativo arrancará por\n"
-"defecto cuando expira la demora de Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Aquí se le presentan varios parámetros que conciernen a su máquina.\n"
-"Dependiendo de su hardware instalado, puede o no, ver las entradas\n"
-"siguientes:\n"
-"\n"
-" * \"Ratón\": verifique la configuración del ratón y haga clic sobre el\n"
-"botón para cambiarla, si es necesario.\n"
-"\n"
-" * \"Teclado\": verifique la configuración de la disposición del teclado y\n"
-"haga clic sobre el botón para cambiarla, si es necesario.\n"
-"\n"
-" * \"Huso horario\": DrakX, de manera predeterminada, adivina su huso\n"
-"horario a partir del idioma que Usted ha elegido. Pero nuevamente, al igual\n"
-"que con la elección del teclado, puede ocurrir que no se encuentre en el\n"
-"país que sugiere el idioma elegido. De ser así, puede necesitar hacer clic\n"
-"sobre el botón \"Huso horario\" para configurar el reloj de acuerdo al huso\n"
-"horario en el que se encuentre.\n"
-"\n"
-" * \"Impresora\": al hacer clic sobre el botón \"Sin impresora\" se abrirá\n"
-"el asistente de configuración de la impresora.\n"
-"\n"
-" * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su "
-"sistema,\n"
-"la misma se muestra aquí. Durante la instalación no es posible modificación\n"
-"alguna.\n"
-"\n"
-" * \"Tarjeta de TV\": si se detecta una tarjeta de TV en su sistema, la\n"
-"misma se muestra aquí. Durante la instalación no es posible modificación\n"
-"alguna.\n"
-"\n"
-" * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la misma\n"
-"se muestra aquí. Puede hacer clic sobre el botón para cambiar los\n"
-"parámetros asociados a la misma."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Elija la unidad de disco que desea borrar para instalar su partición\n"
-"Mandrake Linux nueva. Tenga cuidado, ¡se perderán todos los datos de la\n"
-"misma y no se podrán recuperar!."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Haga clic sobre \"Aceptar\" si desea borrar todos los datos y particiones\n"
-"presentes en esta unidad de disco. Tenga cuidado, luego de hacer clic sobre\n"
-"\"Aceptar\", no podrá recuperar los datos y las particiones presentes en\n"
-"esta unidad de disco, incluyendo los datos de Windows.\n"
-"\n"
-"Haga clic sobre \"Cancelar\" para cancelar esta operación sin perder los\n"
-"datos y las particiones presentes en esta unidad de disco."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"No se puede acceder a los módulos del núcleo correspondientes a su núcleo "
-"(no se encuentra el archivo %s), esto generalmente singnifica que su "
-"disquete de arranque no contiene un núcleo de misma versión que el soporte "
-"de instalación (haga un nuevo disquete de arranque por favor)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Tú también debes formatear %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Ha seleccionado los siguientes servidores: %s\n"
-"\n"
-"\n"
-"Estos servidores se activan por defecto. No se les conocen problemas de\n"
-"seguridad, pero se pueden encontrar problemas nuevos. En ese caso, "
-"debeasegurarse de\n"
-"actualizarlos tan pronto como sea posible.\n"
-"\n"
-"\n"
-"¿Realmente desea instalar estos servidores?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "No se puede usar difusión sin un dominio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserte un disquete formateado con FAT en la disquetera %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Este disquete no está formateado con FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para utilizar esta selección de paquetes salvada, arranque la instalación "
-"con \"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error al leer el archivo %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algún hardware de su computadora necesita controladores \"propietarios\" "
-"para funcionar.\n"
-"Puede encontrar información sobre ellos en: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Debe tener una partición raíz.\n"
-"Para ello, cree una partición (o haga clic sobre una que ya existe).\n"
-"Luego elija la acción \"Punto de montaje\" y defínalo como '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Debe tener una partición de intercambio"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No dispone de una partición de intercambio\n"
-"\n"
-"¿Desea continuar de todas formas?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe tener una partición FAT montada en /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar el espacio libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hay espacio libre suficiente para asignar las particiones nuevas"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usar la partición existente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "No hay ninguna partición existente para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar la partición de Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¿Qué partición desea usar para Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Elija los tamaños"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tamaño de la partición raíz en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tamaño de la partición de intercambio en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar el espacio libre de la partición Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "¿A qué partición desea cambiarle el tamaño?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculando los límites del sistema de archivos Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"El redimensionador de tamaño de la FAT no puede gestionar su partición, \n"
-"ocurrió el error siguiente: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Su partición Windows está muy fragmentada, por favor primero ejecute \"defrag"
-"\""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"¡ADVERTENCIA!\n"
-"\n"
-"Ahora DrakX cambiará el tamaño de su partición Windows. Proceda con "
-"cuidado:\n"
-"esta operación es peligrosa. Si aún no lo hizo, primero debería salir de\n"
-"la instalación, ejecutar scandisk bajo Windows (y opcionalmente ejecutar "
-"defrag),\n"
-"y luego volver a iniciar la instalación. También debería hacer una copia de\n"
-" seguridad de sus datos.\n"
-"Cuando esté seguro, pulse sobre Aceptar."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "¿Qué tamaño desea conservar para windows en la"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partición %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falló el redimensionado de la FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"No hay particiones FAT para redimensionar o para usar como loopback (o no "
-"queda espacio suficiente)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Borrar el disco entero"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Quitar Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tiene más de un disco rígido, ¿sobre cuál desea instalar Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Se perderán TODAS las particiones y sus datos en la unidad  %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamiento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ahora puede particionar %s.\n"
-"Cuando haya terminado, no se olvide de guardar usando 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "No queda espacio libre suficiente en la partición de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "No se puede encontrar nada de espacio para instalar"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"El asistente de particionamiento de DrakX encontró las siguientes soluciones:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Falló el particionamiento: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Levantando la red"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Bajando la red"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocurrió un error y no se puede gestionar de forma adecuada.\n"
-"Continúe bajo su propio riesgo."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaje %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Algunos paquetes importantes no fueron instalados correctamente.\n"
-"Seguramente su lector de CD o su CD de instalación sean defectuosos.\n"
-"Compruebe el CD de instalación en un sistema ya existente con el comando:\n"
-"  rpm -qpl Mandrake/RPMS/*.rpm\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenido a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ninguna disquetera disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando en la etapa '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Su sistema tiene pocos recursos. Puede tener algún problema instalando\n"
-"Mandrake Linux. Si eso ocurre, puede intentar una instalación tipo texto.\n"
-"Para ello, presione 'F1' cuando arranque desde el CDROM, e introduzca 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Tipo de instalación"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Por favor, elija uno de los siguentes tipos de instalación:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"El tamaño total para los grupos que seleccionó es de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si desea instalar un tamaño total inferior,\n"
-"elija el porcentaje de paquetes que desea instalar.\n"
-"\n"
-"Un porcentaje bajo instalará sólo los paquetes más importantes;\n"
-"un porcentaje de 100%% instalará todos los paquetes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tiene espacio en disco para sólo %d%% de esos paquetes.\n"
-"\n"
-"Si desea instalar menos de esto,\n"
-"elija el porcentaje de paquetes que desea instalar.\n"
-"Un porcentaje bajo instalará sólo los paquetes más importantes;\n"
-"un porcentaje de %d%% instalará todos los que sea posible."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Podrá elegirlos más detalladamente en la etapa siguiente"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Porcentaje de paquetes a instalar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selección de grupos de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selección de paquetes individuales"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamaño total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquete incorrecto"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nombre: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versión: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaño: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"No puede seleccionar este paquete porque no hay espacio suficiente para "
-"instalarlo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Se van a instalar los siguientes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Se van a quitar los siguientes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "No puede seleccionar/deseleccionar este paquete"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este es un paquete obligatorio, no puede desmarcarlo"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "No puede desmarcar este paquete. Ya está instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Se debe actualizar este paquete\n"
-"¿Está seguro que quiere desmarcarlo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No puede desmarcar este paquete. Debe ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostrar los paquetes seleccionados automáticamente"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Cargar/Guardar en un disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Actualizando la selección de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Instalación mínima"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Elija los paquetes que desea instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tiempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Preparando la instalación. Espere, por favor"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando el paquete %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rechazar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"¡Cambie su CD-ROM!\n"
-"\n"
-"Inserte el CD-ROM etiquetado como \"%s\" en la unidad y pulse Aceptar cuando "
-"lo  haya hecho.\n"
-"Si no lo posee, pulse Cancelar para cancelar la instalación desde este CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "¿Seguir adelante?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Hubo un error al ordenar los paquetes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Hubo un error al instalar los paquetes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Importante\n"
-"\n"
-"Haga el favor de leer cuidadosamente el presente documento. En caso de "
-"desacuerdo\n"
-"con el presente documento, no está autorizado a instalar los demás\n"
-"CDs.  En este caso seleccione 'Rechazar' para seguir la instalación sin\n"
-"estos CDs.\n"
-"\n"
-"\n"
-"Algunos componentes de software contenidos en los siguientes CDs no\n"
-"están sometidos a las licencias GPL o similares que permitan la copia,\n"
-"adaptación o redistribución.  Cada uno de los componentes de software\n"
-"esta distribuido bajo los términos y condiciones de un acuerdo de\n"
-"licencia propio. Por favor, dirájase a éste y acéptelo antes de instalarlo,\n"
-"usarlo o redistribuirlo. Generalmente, estas licencias no autorizan la\n"
-"copia (salvo las destinadas a copias de seguridad), la distribución, "
-"decompilación,\n"
-"desensamblado, ingeniería inversa, reconstitución de la lógica del\n"
-"programa y/o modificación, salvo en la medida y para las necesidades\n"
-"autorizadas por las leyes vigentes.  Toda violación de la licencia\n"
-"vigente implica generalmente la caducidad de está, sin perjuicio a\n"
-"todos los demás derechos o acciones dirigidos en contra de Ud. Salvo si\n"
-"el acuerdo de licencia lo autoriza, no puede instalar estos programas\n"
-"en más de una máquina, ni adaptarlos para un uso en red. Si fuese\n"
-"necesario, contacte con el distribuidor de cada programa para\n"
-"obtener licencias adicionales. La distribución a terceros de copias de\n"
-"los programas o de la documentación que lo acompaña generalmente\n"
-"suele estar prohibida.\n"
-"\n"
-"\n"
-"Todos los derechos, títulos e intereses de esos programas son la\n"
-"propiedad exclusiva de sus autores respectivos y están protegidos por el\n"
-"derecho de la propiedad intelectual y otras leyes aplicables al derecho\n"
-"del software.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocurrió un error"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "¿Realmente desea salir de la instalación?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acuerdo de licencia"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"EL PRESENTE TEXTO ES UNA TRADUCCIÓN A PROPÓSITO EXCLUSIVAMENTE\n"
-"INFORMATIVO DE LOS TÉRMINOS DE LA LICENCIA DE MANDRAKE LINUX. EN\n"
-"NINGÚN CASO LA PRESENTE TRADUCCIÓN TIENE VALOR LEGAL SIENDO OFICIAL\n"
-"EXCLUSIVAMENTE LA VERSIÓN EN FRANCÉS DE LA LICENCIA DE LINUX-MANDRAKE.\n"
-"No obstante, esperamos que esta traducción ayudará a los que hablan\n"
-"castellano a entenderla mejor.\n"
-"\n"
-"\n"
-"Introducción\n"
-"\n"
-"El conjunto de elementos que incluye el sistema operativo y los\n"
-"diferentes componentes disponibles en la distribución Mandrake Linux\n"
-"se denominarán en adelante \"Programas\". Los programas incluyen en\n"
-"particular, pero de manera no limitativa, el conjunto de programas,\n"
-"procedimientos, reglas y documentaciones relativas al sistema\n"
-"operativo y a los diferentes componentes de la distribución\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licencia\n"
-"\n"
-"Le rogamos leer cuidadosamente este documento. Éste constituye un\n"
-"contrato de licencia entre Ud. (persona física o persona moral) y\n"
-"MandrakeSoft S.A. aplicado a los programas.  El hecho de instalar, \n"
-"duplicar o usar los programas de cualquier manera, indica\n"
-"que acepta explícitamente los términos y condiciones de esta licencia\n"
-"y que está totalmente de acuerdo en lo referente a los términos de la "
-"misma.\n"
-"En caso de no estar de acuerdo con el presente documento, no está\n"
-"autorizado a instalar, duplicar ni usar de ninguna manera\n"
-"este producto. El contrato de licencia sera automáticamente anulado\n"
-"sin aviso previo en el caso que no se cumplan las disposiciones\n"
-"de este documento. En caso de anulación Ud. tendrá que anular\n"
-"inmediatamente todo ejemplar y todas las copias de todos los programas\n"
-"y de todas las documentaciones que constituyen el sistema operativo y\n"
-"los diferentes componentes disponibles en en la distribución\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantía y limitaciones de garantía\n"
-"\n"
-"Los programas y la documentación que los acompaña son proporcionados\n"
-"tal cual y sin ninguna garantía.  MandrakeSoft S.A.\n"
-"no se responsabiliza de las consecuencias de un daño directo,\n"
-"especial, indirecto o accesorio, de cualquiera naturaleza que sea, en\n"
-"relación con la utilización de los programas, en particular y de\n"
-"manera no limitada, todos daños resultados por perdidas de\n"
-"beneficio, interrupción de actividad, pérdida de informaciones\n"
-"comerciales u otras perdidas financieras, así que por eventuales\n"
-"condenaciones e indemnizaciones debidas como consecuencia de una decisión "
-"de\n"
-"la justicia, y eso incluso si MandrakeSoft S.A. hubiera sido informada de "
-"la\n"
-"aparición o eventualidad de tales daños.\n"
-"\n"
-"ADVERTENCIA EN CUANTO A LA POSESIÓN O USO DE PROGRAMAS PROHIBIDOS\n"
-"EN CIERTOS PA�SES\n"
-"\n"
-"En ningún caso, ni MandrakeSoft S.A. ni sus proveedores podrán ser\n"
-"responsabilizados por un perjuicio especial, directo, indirecto o\n"
-"accesorio, de cualquier naturaleza (en particular y de manera\n"
-"no limitada, pérdidas de beneficio, interrupción de actividad,\n"
-"pérdida de informaciones comerciales u otras pérdidas financieras, así\n"
-"como por posibles condenaciones e indemnizaciones debidas\n"
-"consecuentes a una decisión de justicia) que resultaría de la\n"
-"utilización, detención o simple descarga desde uno de los sitios de\n"
-"transferencia de Mandrake Linux de programas prohibidos por la\n"
-"legislación a la que está sometido. Esta advertencia se aplica en\n"
-"particular a algunos componentes de criptografía fuerte incluídos en los\n"
-"programas.\n"
-"\n"
-"\n"
-"3. Licencia GPL y otras licencias\n"
-"\n"
-"Los Programas están constituidos por módulos de programas creados por\n"
-"diversas personas (físicas o legales). Muchos de ellos se\n"
-"distribuyen bajo los términos de la Licencia Pública General GNU\n"
-"(denominada a partir de ahora \"GPL\") u otras licencias parecidas. La "
-"mayoría\n"
-"de estas licencias le permiten copiar, adaptar o redistribuir los\n"
-"módulos de los programas que cubren.  Haga el favor de leer y de aceptar los "
-"términos y\n"
-"condiciones de las licencias que acompañan a cada uno de ellos antes de\n"
-"usarlos. Toda pregunta relativa a la licencia se debe dirigir al autor\n"
-"(o su representante) de dicho programa, y no a MandrakeSoft.  Los\n"
-"programas desarrollados por MandrakeSoft están sometidos a la licencia\n"
-"GPL.  La documentación escrita por MandrakeSoft esta sometida a una\n"
-"licencia especifica.  Haga el favor de dirigirse a la documentación para\n"
-"obtener más información.\n"
-"\n"
-"\n"
-"4. Propiedad intelectual\n"
-"\n"
-"Todos los derechos, títulos e intereses de los diferentes programas\n"
-"son propiedad exclusiva de sus autores respectivos y están protegidos\n"
-"por el derecho de la propiedad intelectual y otras leyes aplicadas a los\n"
-"derechos de los programas.  Las marcas \"Mandrake\" y \"Mandrake Linux\" "
-"así\n"
-"como los logotipos asociados son registrados por MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Disposiciones diversas\n"
-" \n"
-"Si alguna disposición de este contrato de licencia fuera declarada\n"
-"nula, ilegal o inaplicable por un tribunal competente, esta\n"
-"disposición sería excluida del presente contrato.  Sin embargo\n"
-"Ud. seguirá sometido a las otras disposiciones, que tendrán\n"
-"plenos efectos.  El contrato de licencia está regido por las leyes\n"
-"francesas. Toda disputa relativa a los presentes términos será\n"
-"resuelta, preferentemente, por vía amigable.  En caso de desacuerdo con\n"
-"MandrakeSoft S.A., el litigio será tramitado a los tribunales\n"
-"competentes de París, Francia.  Para cualquier pregunta relacionada con\n"
-"este documento, por favor, póngase en contacto con MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Seleccione la distribución de su teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aquí tiene la lista completa de teclados disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "¿Qué tipo de instalación desea?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalación/Actualización"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "¿Es una instalación o una actualización?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Actualización"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Sólo actualizar los paquetes."
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Por favor, seleccione el tipo de su ratón."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Puerto del ratón"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Seleccione el puerto serie al que está conectado el ratón, por favor."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulación de los botones"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulación del botón 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulación del botón 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarjetas PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configurando dispositivos IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "no hay particiones disponibles"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Rastreando las particiones para encontrar los puntos de montaje"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Seleccione los puntos de montaje"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"No se puede leer su tabla de particiones, está demasiado deteriorada :(\n"
-"Se intentará seguir y vaciar las particiones malas (¡se perderán TODOS LOS "
-"DATOS!).\n"
-"La otra solución es no permitir que DrakX modifique la tabla de "
-"particiones.\n"
-"(el error es %s)\n"
-"\n"
-"¿Está de acuerdo en perder todas las particiones?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake no pudo leer correctamente la tabla de particiones.\n"
-"¡Continúe bajo su propio riesgo!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"¡No hay 1MB de espacio para bootstrap! La instalación continuará, pero para "
-"arrancar su sistema, necesitará crear la partición bootstrap en DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "No se encontró partición raíz para efectuar la actualización"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partición raíz"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "¿Cual es la partición raíz (/) de su sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar el equipo para que se efectúe la modificación de la tabla "
-"de particiones"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elija las particiones que desea formatear"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "¿Verificar el disco en busca de bloques malos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formateando las particiones"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando y formateando el archivo %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Espacio de intercambio insuficiente para completar la instalación, añada un "
-"poco más"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Buscando los paquetes disponibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Encontrando los paquetes a actualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Su sistema no tiene espacio suficiente para instalar o actualizar (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Por favor, seleccione cargar o guardar la selección de paquetes en "
-"disquete.\n"
-"El formato es el mismo que los disquetes generados para la instalación "
-"automática."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Cargar desde un disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Cargando desde un disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Selección de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Introduzca un disquete que contenga la selección de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Guardar en un disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "El tamaño seleccionado es mayor que el disponible"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tipo de instalación."
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"No ha seleccionado ningún grupo de paquetes\n"
-"Elija por favor la mínima instalación que quiera."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Con X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Con documentación básica (¡recomendado!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instalación mínima \"en serio\" (especialmente sin urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si tiene todos los CDs de la lista siguiente, haga clic sobre \"Aceptar\".\n"
-"Si no tiene ningún CD, haga clic sobre \"Cancelar\".\n"
-"Si sólo le faltan algunos CDs, desmárquelos y haga clic sobre \"Aceptar\"."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetado como \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparando la instalación"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando el paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuración posterior a la instalación"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Por favor, inserte el disquete de arranque en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Por favor, inserte el disquete de módulos actualizados en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ahora tiene la posibilidad de bajar por la red paquetes específicos\n"
-"durante el procedimiento de instalación, incuídos programas de cifrado.\n"
-"\n"
-"ADVERTENCIA:\n"
-"\n"
-"Debido a las diferencias de los requisitos aplicables a ese tipo de\n"
-"programas por las distintas jurisdicciones, es el cliente y/o el usuario "
-"final\n"
-"de dichos programas quien debe verificar que las leyes de su jurisdicción "
-"le\n"
-"permitan bajar, guardar y/o utilizar dichos programas.\n"
-"\n"
-"En particular el cliente y/o usuario final debe tener un cuidado especial\n"
-"de no violar las leyes de su de su jurisdicción. En el caso de que el "
-"cliente y/o\n"
-"el usuario final no respetase las condiciones de las leyes que le son\n"
-"aplicables, es posible que sea severamente sancionado por la ley.\n"
-"\n"
-"En ningún caso MandrakeSoft ni ninguno de sus fabricantes y/o\n"
-"distribuidores se puede considerar responsable por daños especiales, "
-"directos\n"
-"o indirectos de cualquier tipo (incluyendo, pero sin limitarse a ello, "
-"pérdida\n"
-"de beneficios, ruptura de negocios, pérdida de datos comerciales u otras\n"
-"pérdidas pecuniarias, o eventuales responsabilidades e indemnizaciones\n"
-"a pagar debido a decisiones de la justicia) que puedan ocurrir mediante el\n"
-"uso, posesión o el sólo hecho de descargar de Internet o por otro medio, "
-"programas\n"
-"a los cuales el cliente y/o usuario final tenga acceso después de haber\n"
-"firmado el presente convenio.\n"
-"\n"
-"Para preguntas relativas a este convenio, póngase en contacto con\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Ahora tiene la posibilidad de bajarse paquetes actualizados,\n"
-"que han salido despues de que se haya hecho la distribución.\n"
-"\n"
-"Conseguirá actualizaciones de fallos y de seguridad, pero debe\n"
-"tener una conexión a la Internet configurada para proceder.\n"
-"\n"
-"¿Desea instalar las actualizaciones?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Contactando con el sitio web de Mandrake Linux para obtener la lista de las "
-"réplicas disponibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elija un sitio de réplica del que bajar los paquetes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Contactando con el sitio de réplica para obtener la lista de los paquetes "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "¿Cuál es su huso horario?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Reloj interno puesto a GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronización automática de hora (usando NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Servidor NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Sin impresora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "¿Tiene una tarjeta de sonido ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Use \"sndconfig\" luego de la instalación para configurar su tarjeta de "
-"sonido"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"No se detectó tarjeta de sonido. Pruebe \"harddrake\" luego de la instalación"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resumen"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Ratón"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Huso horario"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Tarjeta RDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Tarjeta de sonido"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Tarjeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Archivos locales"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contraseña de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sin contraseña"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Esta contraseña es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentificación"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentificación LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentificación NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"útil\n"
-"si no desea instalar SILO en su sistema, o si cualquier otro sistema "
-"operativo borra\n"
-"SILO, o si SILO no funciona con su configuración de hardware. Un disquete\n"
-"de arranque personalizado también se puede usar con la imagen de rescate de\n"
-" Mandrake haciendo así mucho más fácil la recuperación en caso de fallo\n"
-"grave del sistema.\n"
-"\n"
-"Si desea crear un disquete de arranque para su sistema, inserte un disquete\n"
-"en la primer disquetera y presione \"Aceptar\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primera disquetera"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segunda disquetera"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omitir"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"útil\n"
-"si no desea instalar LILO (o grub) en su sistema, o si cualquier otro "
-"sistema operativo borra\n"
-"LILO, o si LILO no funciona con su configuración de hardware. Un disquete\n"
-"de arranque personalizado también se puede usar con la imagen de rescate de\n"
-"Mandrake haciendo así mucho más fácil la recuperación en caso de fallo\n"
-"grave del sistema. ¿Desea crear un disquete de arranque para su sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(¡ATENCIÓN! Está utilizando  XFS en su partición raíz,\n"
-"la creación de un disquete de arranque en un disquete de 1.44Mb puede "
-"fallar\n"
-"porque XFS necesita un controlador muy grande)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Disculpe, pero no hay ninguna disquetera disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elija la disquetera que desea usar para crear el disco de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inserte un disquete en %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creando el disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparando el cargador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Parece que tiene una máquina desconocida o demasiado\n"
-"antigua. El gestor de arranque yaboot no funcionará.\n"
-"La instalación continuará, pero necesitará\n"
-"utilizar BootX para arrancar su máquina."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "¿Desea usar aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ocurrió un error al instalar aboot, \n"
-"¿desea forzar la instalación incluso si ello implicara la destrucción de la "
-"primera partición?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instalando cargador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Falló la instalación del cargador de arranque. Ocurrió el siguiente error:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Puede necesitar cambiar el dispositivo de arranque de Open Firmware para\n"
-" activar el cargador de arranque. Si no ve el prompt del cargador de\n"
-" arranque al reiniciar, mantenga presionado Command-Option-O-F al\n"
-" reiniciar e introduzca:\n"
-" setenv boot-device %s, \\\\:tbxi\n"
-" Luego escriba: shut-down\n"
-"La próxima vez que arranque debería ver el prompt del cargador de arranque."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserte un disquete en blanco en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creando el disquete de instalación automática"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Algunas de las etapas no fueron completadas.\n"
-"\n"
-"¿Realmente desea salir ahora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicidades, la instalación está completa.\n"
-"Extraiga el soporte de arranque y presione Intro para reiniciar.\n"
-"\n"
-"Para obtener información sobre correcciones disponibles para esta versión\n"
-"de Mandrake Linux, consulte el archivo de erratas disponible en\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Hay información disponible sobre cómo configurar su sistema en el capítulo "
-"de\n"
-"configuración tras la instalación de la guía de usuario oficial de Mandrake "
-"Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Generar un disquete de instalación automática"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"La instalación automática puede automatizarse por completo si lo desea,\n"
-"¡¡en ese caso se adueñará del disco rígido!!\n"
-"(la intención de esto es instalarlo en otro ordenador).\n"
-"\n"
-"Puede preferir reproducir la instalación.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizada"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reproducir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Guardar la selección de paquetes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalación %s de Mandrake Linux"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre elementos  | <espacio> seleccionar | <F12> pantalla "
-"sig. "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "no se encuentra kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "falta \"consolehelper\""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Elija un archivo"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanzada"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Básico"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Espere, por favor"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir el árbol"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Contraer el árbol"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Cambiar entre vista plana y ordenada por grupos"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Elección incorrecta, inténtelo de nuevo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "¿Su elección? (por defecto %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entradas que tendrá que rellenar:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "¿Su elección? (0/1, por defecto '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Botón `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "¿Desea pulsar este botón?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "¿Su elección? (por defecto %s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hay muchas cosas para seleccionar (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Por favor, seleccione el primer número del rango de 10 que desee\n"
-"editar, o pulse Intro para continuar.\n"
-"¿Su elección?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Aviso, una etiqueta cambió:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Reenviar"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemán"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Español"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandés"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francés"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruego"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruso"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estadounidense"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenio (antiguo)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenio (nuevo)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbadján (latín)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Búlgaro (fonético)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Búlgaro (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileño (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorruso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suizo (germánico)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suizo (francés)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemán (sin teclas muertas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danés"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruego)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Sueco)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (estilo \"ruso\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (estilo \"latín\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Griego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelí"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelí (fonético)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraní"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandés"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonés de 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Coreano"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinoamericano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antiguo)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (nuevo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"numérico\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Letón"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandés"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (distribución qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (distribución qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugués"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadiense (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumano (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumano (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Esloveno"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbio (cirílico)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado tailandés"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Teclado tajik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo \"Q\" moderno)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"numérico\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavo (latín)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Tecla Alt derecha"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Ambas teclas Shift simultáneamente"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Las teclas Control y Shift simultáneamente"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Tecla CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Las teclas Ctrl y Alt simultáneamente"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Las teclas Alt y Shift simultáneamente"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "La tecla \"Menú\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Tecla \"Windows\" de la izquierda"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Tecla \"Windows\" de la derecha"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montajes circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Quite los volúmenes lógicos primero\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"El soporte PCMCIA no existe en los núcleos 2.2. Por favor, utilice un núcleo "
-"2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Ratón Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ratón genérico PS2 con rueda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botón"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Ratón de 2 botones genérico"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Genérico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rueda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Ratón de 3 botones genérico"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Ratón Logitech (serie, antiguo tipo C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "ratón bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botones"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botones"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ninguno"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Sin ratón"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Pruebe su ratón, por favor."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para activar el ratón,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "¡MUEVA SU RUEDA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Siguiente ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "¿Es correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar a Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La forma más común de conexión ADSL es con pppoe.\n"
-"Algunas conexiones usan pptp, otras pocas usan dhcp.\n"
-"Si no lo sabe con seguridad, elija 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¿Qué cliente dhcp desea utilizar?\n"
-"dhcpcd es el predeterminado"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No se ha detectado ningún adaptador de red ethernet en su sistema.\n"
-"No se puede configurar este tipo de conexión."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Elija la interfaz de red"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Por favor, elija el adaptador de red que desea usar para conectarse a "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "no se encontró ninguna tarjeta de red"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configurando la red"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Por favor introduzca el nombre de su máquina (host) si lo conoce.\n"
-"Algunos servidores DHCP necesitan del nombre de la máquina para funcionar.\n"
-"El nombre de su máquina debería ser un nombre de máquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nombre de la máquina"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Asistente para la configuración de la red"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Módem RDSI externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Tarjeta RDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¿De qué tipo es su conexión RDSI?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"¿Qué configuración de RDSI prefiere?\n"
-"\n"
-"* La configuración antigua utiliza isdn4net. Tiene herramientas\n"
-"  poderosas, pero es algo complicada de configurar para un recién \n"
-"  llegado, y no es estándar.\n"
-"* La configuración nueva es más fácil de entender, más estándar,\n"
-"  pero con menos herramientas.\n"
-"\n"
-"Le recomendamos la configuración ligera (esto es, la nueva).\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Configuración nueva (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Configuración antigua (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuración de RDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione su proveedor.\n"
-" Si no está en la lista, elija No listado"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocolo de Europa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocolo de Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocolo para el resto del mundo"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocolo para el resto del mundo \n"
-" sin canal D (líneas alquiladas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "¿Qué protocolo desea utilizar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "¿Qué tipo de tarjeta tiene?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "No lo sé"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si tiene una tarjeta ISA, los valores de la próxima pantalla deberían ser "
-"correctos.\n"
-"\n"
-"Si tiene una tarjeta PCMCIA, tiene que saber la irq y la e/s de su tarjeta.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "¿Cuál es su tarjeta RDSI?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Se ha detectado una tarjeta RDSI PCI, pero no se conoce el tipo. Por favor, "
-"seleccione una tarjeta PCI en la pantalla siguiente."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No se encontró tarjeta PCI RDSI. Por favor, seleccione una en la pantalla "
-"siguiente."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Seleccione el puerto serie al que está conectado su módem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opciones de llamada por módem"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nombre de la conexión"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Número de teléfono"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de conexión"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Por script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Por terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nombre de dominio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segundo servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Puede desconectarse o volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Puede volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Ahora está conectado a Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Se puede conectar a Internet o volver a configurar su conexión."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Ahora no está conectado a Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Conectar"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Desconectar"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configurar la conexión"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Configuración y conexión a Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ahora vamos a configurar la conexión %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ahora vamos a configurar la conexión %s.\n"
-"\n"
-"\n"
-"Pulse siguiente para continuar."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuración de la red"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Puesto que está realizando una instalación por red, su red ya está "
-"configurada.\n"
-"Haga clic sobre aceptar para mantener su configuración, o pulse cancelar "
-"para\n"
-"volver a configurar sus conexiones de red y a Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenido al asistente para la configuración de la red\n"
-"\n"
-"Estamos a punto de configurar su conexión de red/Internet.\n"
-"Si no desea usar la detección automática, desmarque la casilla.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Elija el perfil a configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar detección automática"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detectando los dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Conexión normal por módem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectada en el puerto %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Conexión RDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectada %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Conexión ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectada en la interfaz %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detectada conexión por cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Conexión a la red local"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "tarjeta(s) de red detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Elija la conexión que desea configurar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Ha configurado múltiples formas de conectarse a Internet.\n"
-"Seleccione la que quiere utilizar.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Conexión a Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "¿Desea iniciar su conexión al arrancar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuración de la red"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "La red necesita ser reiniciada"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ocurrió un problema mientras se reiniciaba la red: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Felicidades, la configuración de la red y de Internet ha terminado.\n"
-"\n"
-"Ahora se aplicará la configuración a su sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Después de esto, se recomienda que reinicie su entorno X\n"
-"para evitar el problema del cambio del nombre de la máquina."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Ocurrieron problemas durante la configuración.\n"
-"Verifique su conexión con net_monitor o mcc. Si su conexión no funciona, "
-"puede que desee volver a iniciar la configuración"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVERTENCIA: Previamente se ha configurado este dispositivo para conectarse "
-"con Internet.\n"
-"Simplemente acepte para mantener la configuración del dispositivo.\n"
-"Al modificar los campos de abajo se ignorará esta configuración."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Por favor, introduzca la dirección IP de esta máquina.\n"
-"Cada valor tiene que introducirse como una dirección IP en notación\n"
-"decimal con puntos (por ejemplo: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando el dispositivo de red %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Dirección IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Máscara de red"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Dirección IP automática"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Las direcciones IP deben estar en el formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Por favor, defina el nombre de su máquina.\n"
-"El nombre de su máquina debería ser un nombre de máquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\".También puede introducir la dirección "
-"IP de la pasarela si tiene una"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Pasarela de red (ej %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela de red"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuración de los proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Id tarjeta de red (útil para portátiles)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "El nombre del proxy debe ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "El nombre del proxy debe ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "¿Desea intentar conectarse a Internet ahora?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probando su conexión..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ahora no está conectado a Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por motivos de seguridad, ahora será desconectado."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"El sistema no parece estar conectado al Internet.\n"
-"Intente volver a configurar su conexión."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuración de la conexión"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Por favor, complete o verifique el campo de abajo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ de la tarjeta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoria (DMA) de la tarjeta"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S de la tarjeta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_0 de la tarjeta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 de la tarjeta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Su número de teléfono personal"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nombre del proveedor (ej proveedor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Número de teléfono del proveedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveedor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveedor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Elija su país"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de marcación"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Velocidad de la conexión"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Demora de la conexión (en seg)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Usuario de la cuenta (nombre de usuario)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Contraseña de la cuenta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mount falló: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "La partición extendida no está disponible en esta plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Tiene un hueco en la tabla de particiones, pero no se puede usar.\n"
-"La única solución es desplazar sus particiones primarias para que el hueco "
-"esté después de las particiones extendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Falló la restauración a partir del archivo %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Archivo de respaldo incorrecto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error al escribir en el archivo %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Está ocurriendo algo malo en su disco. \n"
-"Ha fallado una prueba para verificar la integridad de los datos. \n"
-"Esto significa que escribir cualquier cosa en el disco terminará produciendo "
-"basura al azar"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "necesario"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muy bueno"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bueno"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "quizás"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-"CUPS - Common Unix Printing System (Sistema de impresión común de Unix)"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR de nueva generación"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon (Demonio de impresora de líneas)"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Imprimir, no encolar)"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Impresora en un servidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Impresora en un servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de red (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora en un servidor SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Impresora en un servidor NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Introduzca el URI del dispositivo de impresión"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Filtrar el trabajo en un comando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modelo desconocido"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Impresoras locales"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Impresoras remotas"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " en el puerto paralelo \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", impresora USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", dispositivo multifunción en puerto paralelo \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", dispositivo multi-función en USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositivo multifunción en HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", dispositivo multifunción"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", imprimiendo en %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr " en servidor LDP \"%s\", impresora \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", puerto \"%s\""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr " en servidor Windows \"%s\", compartida como \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "en servidor Novell \"%s\", impresora \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", usando comando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Impresora \"en crudo\" (sin controlador)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(en esta máquina)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "En servidor CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Por defecto)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccione la conexión de la impresora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¿Como está conectada la impresora?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Aquí no tiene que configurar las impresoras en los servidores CUPS remotos; "
-"las mismas se detectarán automáticamente."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Configuración de CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Especificar servidor CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Para obtener acceso a las impresoras en servidores CUPS remotos en su red "
-"local nada tiene que configurar; los servidores CUPS le informan a su "
-"máquina automáticamente sobre sus impresoras. En la sección \"Impresoras "
-"remotas\" de la ventana principal de Printerdrake se listan todas las "
-"impresoras que su máquina conoce. Cuando CUPS no está en la red local, tiene "
-"que ingresar la dirección IP del servidor CUPS y, opcionalmente, el número "
-"de puerto para obtener la información de la impresora desde el servidor, de "
-"lo contrario, deje los campos en blanco."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalmente, CUPS se configura automáticamente de acuerdo con su\n"
-"entorno de red, para que pueda acceder a las impresoras de los\n"
-"servidores CUPS de su red local. Si esto no funciona correctamente,\n"
-"desactive la \"Configuración automática de CUPS\" y edite manualmente\n"
-"su archivo /etc/cups/cupsd.conf. No olvide reiniciar CUPS tras esto\n"
-"(comando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Las direcciones IP deberían parecerse a 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "¡El número de puerto debe ser un número entero!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Puerto"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Configuración automática de CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Detectando dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probar puertos"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Añadir una impresora nueva"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Bienvenido al asistente de configuración de la impresora\n"
-"\n"
-"Este asistente le permite instalar impresoras locales o remotas para usarlas "
-"desde esta máquina y también desde otras máquinas de la red.\n"
-"\n"
-"Se le solicitará la información necesaria para configurar la impresora y "
-"darle acceso a los controladores de todas las impresoras disponibles, "
-"opciones del controlador y tipos de conexión de impresoras."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Bienvenido al asistente de configuración de la impresora\n"
-"\n"
-"Este asistente le ayudará a instalar su(s) impresora(s) conectada(s) a esta "
-"computadora.\n"
-"\n"
-"Por favor, conecte su(s) impresora(s) a este ordenador y enciéndala(s). Haga "
-"clic en \"Siguiente\" cuando esté listo, y en \"Cancelar\" si no quiere "
-"configurar ahora su(s) impresora(s).\n"
-"\n"
-"Fíjese en que algunas computadoras pueden colgarse durante la detección "
-"automática de la impresora. En este caso, desactive \"Detectar las "
-"impresoras automáticamente\" para hacer una instalación sin detección "
-"automática. Use el \"Modo experto\" de printerdrake si quiere configurar la "
-"impresión en una impresora remota si printerdrake no la lista "
-"automáticamente."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Detección automática de impresoras"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Enhorabuena, su impresora está instalada y configurada.\n"
-"\n"
-"Puede imprimir usando el comando \"Imprimir\" de su aplicación (normalmente "
-"se encuentra en el menú \"Archivo\").\n"
-"\n"
-"Si quiere añadir, borrar o renombrar una impresora, o si quiere cambiar las "
-"opciones de configuración por defecto (bandeja de entrada de papel, calidad "
-"de impresión, ...), seleccione \"Impresora\" en la sección de \"Hardware\" "
-"del Centro de control de Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Autodetección de impresoras."
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake puede detectar automáticamente sus impresoras de puerto "
-"paralelo y USB conectadas localmente, pero fíjese en que en algunos sistemas "
-"esto PUEDE COLGAR EL SISTEMA E INCLUSO CORROMPER SUS SITEMAS DE ARCHIVOS. "
-"Entonces, H�GALO BAJO SU PROPIO RIESGO.\n"
-"\n"
-"¿Seguro que desea detectar automáticamente sus impresoras?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Realizar detección automática"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Configurar la impresora manualmente"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detectada %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Impresora en puerto paralelo \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Impresora USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"No se encontró ninguna impresora local. Para instalar una manualmente, "
-"introduzca un nombre de dispositivo/nombre de archivo en la línea de entrada "
-"(Puertos paralelos: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1ª impresora USB: /dev/usb/lp0, 2ª impresora USB: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Debe introducir un dispositivo un un nombre de archivo"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"¡No se encontraró ninguna impresora local!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Las impresoras en red sólo se pueden instalar tras la inslación. Seleccione "
-"\"Hardware\" y luego \"Impresora\" en el Centro de control de Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Para instalar impresoras en red, haga clic en \"Cancelar\", cambie al \"Modo "
-"experto\", y haga clic en \"Añadir una nueva impresora\" de nuevo."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Se detectó automáticamente la siguiente impresora, si no es una de las que "
-"quiere configurar, introduzca en la línea de entrada un nombre de "
-"dispositivo/nombre de archivo en la línea de entrada"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Aquí tiene una lista de todas las impresoras detectadas automáticamente. Por "
-"favor, seleccione la impresora que quiere configurar o introduzca un nombre "
-"de dispositivo/nombre de archivo en la línea de entrada"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"La siguiente impresora se detectó automáticamente. La configuración de la "
-"impresora se hará de forma totalmente automatizada. Si su impresora no se "
-"detectó correctamente o si prefiere una configuración personalizada, active "
-"la \"Configuración manual\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Aquí tiene una lista de las impresoras detectadas automáticamente. Por "
-"favor, seleccione la impresora que quiera configurar. La configuración de la "
-"impresora se hará de forma totalmente automatizada. Si su impresora no se "
-"detectó correctamente o si prefiere una configuración personalizada, active "
-"la \"Configuración manual\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Por favor, elija el puerto donde está conectada su impresora o ingrese el "
-"nombre de un dispositivo o archivo en la línea de entrada"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Por favor, elija el puerto al que está conectado su impresora."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Puertos paralelo: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1er impresora USB: /dev/usb/lp0, 2da impresora USB: /dev/usb/lp1, ...) "
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "¡Debe elegir/ingresar una impresora o un dispositivo!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Configuración manual"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"¿Es su impresora un dispositivo multifunción de HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 con escáner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instalando el paquete HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Verificando el dispositivo y configurando HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instalando el paquete SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Escaneando en su dispositivo multifunción de HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Haciendo que el puerto de impresora esté disponible para CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Leyendo base de datos de impresoras ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opciones de la impresora remota lpd"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para utilizar impresora LPD remota, necesita proporcionar el nombre de host "
-"del servidor de impresión y el nombre de la impresora en ese servidor."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nombre de host del servidor remoto"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nombre de la impresora remota"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "¡Falta el nombre del host remoto!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "¡Falta el nombre de la impresora remota!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opciones de la impresora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir en una impresora SMB, necesita proporcionar el nombre del "
-"servidor SMB (¡Note que puede ser diferente al nombre de hostTCP/IP del "
-"mismo!) y posiblemente la dirección IP del servidor de impresión, así como "
-"el nombre del recurso compartido para la impresora que se quiere usar y "
-"cualquier otra información del nombre de usuario, contraseña y grupo de "
-"trabajo que haga falta."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Máquina del servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nombre del recurso compartido"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de trabajo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¡Debe indicar el nombre o la dirección IP del servidor!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "¡No se encuentra el nombre del recurso compartido de Samba!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "¡ADVERTENCIA DE SEGURIDAD!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Está a punto de configurar la impresión a una cuenta Windows con contraseña. Debido a una falla en la arquitectura del cliente Samba la contraseña se pone como texto plano en la línea de comandos del cliente Samba que se usa para transmitir el trabajo de impresión al servidor Windows. Por lo tanto, es posible que cada usuario de esta máquina vea la clave en pantalla ejecutando \"ps auxwww\".\n"
-"\n"
-"Recomendamos utilizar alguna de las alternativas siguientes (en todos los casos tiene que asegurarse que sólo las máquinas de su red local tienen acceso al servidor Windows, por ejemplo utilizando un cortafuegos):\n"
-"\n"
-"Usar una cuenta sin contraseña en su servidor Windows, por ej. la cuenta \"GUEST\" o una cuenta especial dedicada a la impresión. No quite la protección con contraseña de una cuenta personal o de la cuenta del administrador.\n"
-"\n"
-"Configure a su servidor Windows para que la impresión esté disponible bajo el protocolo LPD y configure la impresión desde esta máquina bajo el tipo de conexión \"%s\" en PrinterDrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr "Configure a su servidor Windows para que la impresión esté disponible bajo el protocolo IPP y configure la impresión desde esta máquina bajo el tipo de conexión \"%s\" en PrinterDrake.\n\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Conecte su impresora a un servidor Linux y permita que su(s) máquina(s) Windows se conecten al mismo como un cliente.\n"
-"\n"
-"¿Realmente desea continuar configurando esta impresora como lo está haciendo?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opciones de la impresora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir en una impresora NetWare, es necesario escribir el nombre del "
-"servidor de impresión NetWare (¡Note que puede no ser el mismo que el nombre "
-"de la máquina en TCP/IP) así como el nombre de la cola de impresión que "
-"desea usar y el nombre de usuario y la contraseña apropiados."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nombre de la cola de impresión"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "¡No se encuentra el nombre del servidor NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "¡No se encuentra la cola del servidor NCP!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Opciones de la impresora por socket/TCP"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir en una impresora por socket o TCP, necesita proporcionar el "
-"nombre de host de la impresora y opcionalmente el número de puerto. En "
-"servidores HP JetDirect el número de puerto por lo general es 9100, en otros "
-"servidores puede variar. Consulte el manual de su hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nombre de host de la impresora"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "¡No se encuentra el nombre de la máquina de la impresora!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI del dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Puede especificar directamente el URI para acceder a la impresora. El URI "
-"debe cumplir con las especificaciones Foomatic o CUPS. Recuerde que no todos "
-"los sistemas de impresión admiten URIs."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "¡Debe introducir un URI válido!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Cada impresora necesita un nombre (por ejemplo, \"impresora\"). No tiene por "
-"qué rellenar los campos Descripción ni Ubicación. Son comentarios para los "
-"usuarios."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nombre de la impresora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descripción"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ubicación"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Preparando base de datos de impresoras ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "El modelo de su impresora"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake ha comparado el modelo que resultó de la detección automática "
-"con los modelos listados en su base de datos de impresoras para encontrar la "
-"mejor coincidencia. Esta elección puede estar equivocada, especialmente si "
-"su impresora no está listada en absoluto en la base de datos. Entonces, "
-"verifique si la elección es correcta y haga clic en \"El modelo es correcto"
-"\" , caso contrario, haga clic en \"Seleccionar el modelo manualmente\" de "
-"forma tal que pueda elegir el modelo de su impresora manualmente en la "
-"pantalla siguiente.\n"
-"\n"
-"Para su impresora Printerdrake ha encontrado:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "El modelo es correcto"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Seleccionar el modelo manualmente"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Selección del modelo de impresora"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "¿Qué modelo de impresora tiene?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Por favor, verifique que Printerdrake hizo correctamente la detección "
-"automática del modelo de su impresora. Busque el modelo correcto en la lista "
-"si el cursor está sobre un modelo equivocado o si está en \"Impresora en "
-"crudo\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si no se lista su impresora, elija una compatible (vea el manual de la "
-"misma) o una simliar."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Configuración de impresora de windows OKI"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Va a configurar una impresora laser de windows OKI. Estas impresoras\n"
-"utilizan un protocolo de comunicación muy especial y sólo funcionan cuando "
-"se conectan al primer puerto paralelo. Cuando su impresora está conectada a "
-"otro puerto o a un servidor de impresión, por favor conéctela al primer "
-"puerto paralelo antes de imprimir una página de prueba. De no ser así, la "
-"impresora no funcionará. El controlador ignorará la configuración del tipo "
-"de conexión."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Configuración de impresora de inyección de tinta Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Los controladores de impresión de inkjet que proporciona Lexmark sólo "
-"admiten impresoras locales, no impresoras en máquinas remotas o servidores "
-"de impresión. Por favor, conecte su impresora a un puerto local o "
-"configúrelo en la máquina a la que está conectada."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Para permitir imprimir con su impresora de inyección de tinta Lexmark y esta "
-"configuración, necesita los controladores de impresoras de inyección de "
-"tinta proporcionados por Lexmark (http://www.lexmark.com/). Vaya al sitio de "
-"EEUU y haga clic en el botón \"Drivers\". Luego, seleccione su modelo y "
-"posteriormente \"Linux\" como sistema operativo. Los controladores vienen "
-"vienen como paquetes RPM o como scripts de la shell con instalación gráfica "
-"interactiva. No necesita hacer esta configuración con los interfaces "
-"gráficos. Cancele directamente tras el acuerdo de licencia. Luego imprima "
-"páginas alineadas con la cabeza de impresión \"lexmarkmaintain\" y ajuste la "
-"configuración de la alineación de la cabeza con este programa."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Configuraciones predeterminadas de la impresora\n"
-"\n"
-"Debería asegurarse que el tamaño de página y el tipo de tinta/modo de "
-"impresión (si corresponde) y también la configuración de hardware de las "
-"impresoras láser (memoria, unidad de dúplex, bandejas adicionales) están "
-"configurados correctamente. Note que una calidad de impresión o resolución "
-"extremadamente alta puede ser bastante lenta."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "¡La opción %s debe ser un número entero!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "¡La opción %s debe ser un número!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "¡La opción %s está fuera de rango"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"¿Quiere configurar esta impresora (\"%s\")\n"
-"como la impresora predeterminada?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Páginas de prueba"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Por favor, seleccione las páginas de prueba que quiere imprimir.\n"
-"Nota: la página de prueba de foto puede tardar mucho tiempo en ser impresa e "
-"incluso en impresoras láser con muy poca memoria puede que no salga. En la "
-"mayoría de los casos, basta con imprimir la página de prueba estándar."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "No hay páginas de prueba"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Imprimir"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Página de prueba estándar"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Página de prueba alternativa (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Página de prueba alternativa (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Página de prueba de foto"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "No imprimir ninguna página de prueba"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimir la(s) página(s) de prueba..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(s) página(s) de prueba se enviaron a la impresora.\n"
-"Puede que pase algo de tiempo antes de que comience la impresión.\n"
-"Estado de la impresión:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(s) página(s) de prueba se enviaron al demonio de impresión.\n"
-"Puede que pase algo de tiempo antes de que comience la impresión.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "¿Funcionó adecuadamente?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Impresora en crudo"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Para imprimir un archivo desde la línea de comando (ventana de terminal) "
-"utilice el comando \"%s <archivo>\" o una herramienta de impresión gráfica: "
-"\"xpp <archivo>\" o \"kprinter <archivo>\". Las herramientas gráficas le "
-"permiten seleccionar la impresora y modificar las opciones de configuración "
-"fácilmente.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Estos comando también se utilizan en el campo \"Comando de impresión\" de "
-"los diálogos de impresión de muchas aplicaciones, pero aquí no se indica el "
-"nombre del archivo porque el archivo a imprimir lo proporciona la "
-"aplicación.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"El comando \"%s\" también permite modificar las opciones de configuración "
-"para un trabajo de impresión determinado. Simplemente, añada las "
-"configuraciones deseadas a la línea de comando, por ejemplo \"%s <archivo>"
-"\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Para obtener una lista con las opciones disponibles para la impresora actual "
-"lea la lista que se muestra debajo o haga clic en el botón \"Imprimir lista "
-"de opciones\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Aquí tiene una lista de las opciones disponibles para la impresora actual:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la línea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Este comando también se utiliza en el campo \"Comando de impresión\" de los "
-"diálogos de impresión de muchas aplicaciones. Pero aquí no se da el nombre "
-"del archivo porque el nombre del archivo a imprimir lo proporciona la "
-"aplicación.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Para obtener una lista de las opciones disponibles para la impresora actual, "
-"haga clic en el botón \"Imprimir lista de opciones\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la línea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\" o \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"También puede utilizar el interfaz gráfico \"xpdq\" para configurar las "
-"opciones y manipular los trabajos de impresión.\n"
-"Si está usando KDE como entorno de escritorio tiene un \"botón de pánico\", "
-"un icono en su escritorio etiquetado como \"¡DETENER impresora!\", que "
-"detiene todos los trabajos de impresión inmediatamente cuando hace clic en "
-"él. Esto es útil, por ejemplo, para atascos de papel.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-" Los comandos \"%s\" y \"%s\" también permiten modificar las opciones de "
-"configuración para un trabajo de impresión particular. Simplemente añada las "
-"opciones deseadas a la línea de comando, por ejemplo \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Cerrar"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Imprimiendo/Escaneando en \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Imprimiendo en la impresora \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Imprimir lista de opciones"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Su dispositivo multifunción de HP se configuró automáticamente para ser "
-"capaz de escanear. Ahora puede escanear con \"scanimage\" (\"scanimage -d hp:"
-"%s\" para especificar el escáner si tiene más de uno) desde la línea de "
-"comandos o con los interfaces gráficos \"xscanimage\" o \"xsane\". Si está "
-"usando el GIMP, también puede escanear seleccionado el punto apropiado del "
-"menú \"Archivo\"/\"Adquirir\". Lance también \"man scanimage\" y \"man sane-"
-"hp\" en la línea de comandos para obtener más información.\n"
-"\n"
-"No use \"scannerdrake\" para este dispositivo."
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Su dispositivo multifunción HP se configuró automáticamente para ser capaz "
-"de escanear. Ahora puede escanear desde la línea comandos con \"ptal-hp %s "
-"scan ...\". No se soporta aún el escaneo por medio de un interfaz gráfico e "
-"desde el GIMP para su dispositivo. Encontrará más información en el archivo "
-"de su sistema \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\". Si tiene una HP "
-"LaserJet 1100 o 1200 puede escanear cuando tenga la opción del escáner "
-"instalada.\n"
-"No use \"scannerdrake\" para este dispositivo."
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Leyendo los datos de la impresora ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transferir configuración de la impresora"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Puede copiar la configuración de la impresora que ha realizado para la cola %"
-"s a %s, su cola corriente. Todos los datos de configuración (nombre de la "
-"impresora, descripción, ubicación, tipo de conexión, y opciones "
-"predeterminadas) se transfieren, pero los trabajos de impresión no se "
-"transfieren.\n"
-"Debido a las siguientes razones no todas las colas se pueden transferir:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS no soporta impresoras en servidores Novell o impresoras que envían los "
-"datos en un comando formado libremente.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ sólo soporta impresoras locales, impresoras LPD remotas, e impresoras "
-"Socket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD y LPRng no soportan impresoras IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Además, las colas no creadas con este programa o con \"foomatic-configure\" "
-"no se pueden transferir."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Tampoco se pueden transferir las impresoras configuradas con los archivos "
-"PPD provistos por sus fabricantes o con controladores CUPS nativos."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Marque las impresoras que desea transferir y haga clic \n"
-"sobre \"Transferir\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "No transferir impresoras"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transferir"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ya existe una impresora denominada \"%s\" bajo %s. \n"
-"Haga clic sobre \"Transferir\" para sobre-escribirla.\n"
-"También puede ingresar un nombre nuevo o saltear esta impresora."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nombre de la impresora sólo debería contener letras, números y el guión "
-"bajo"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"La impresora \"%s\" ya existe,\n"
-"¿realmente desea sobre-escribir la configuración de la misma?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nuevo nombre de la impresora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfiriendo %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Ha transferido su impresora por defecto anterior (\"%s\"), ¿Debería ser "
-"también la impresora por defecto bajo el nuevo sistema de impresión %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Refrescando datos de impresora ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Configuración de una impresora remota"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Iniciando la red ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configurar la red ahora"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Funcionalidad de red no configurada"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Va a configurar una impresora remota. Para esto, se necesita un acceso a la "
-"red funcionando, pero aún no ha configurado su red. Si sigue sin "
-"configuración de red, no podrá utilizar la impresoara que está configurando "
-"ahora. ¿Cómo desea proceder?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Continuar sin configurar la red"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"La configuración de la red hecha durante la instalación no se puede iniciar "
-"ahora. Por favor, verifique si la red se hace accesible tras reiniciar su "
-"sistema y corrija la configuración usando el Centro de control de Mandrake, "
-"sección \"Redes e Internet\"/\"Conexión\", y tras esto configure la "
-"impresora, también utilizando el Centro de Control de Mandrake, sección "
-"\"Hardware\"/\"Impresora\"."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"El acceso a la red no estaba corriendo y no se puede iniciar. Por favor, "
-"verifique su configuración y su hardware. Luego, intente configurar su "
-"impresora remota de nuevo."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Reiniciando el sistema de impresión ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "Alta"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoica"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalando un sistema de impresión en el nivel de seguridad %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Va a instalar el sistema de impresión %s sobre un sistema corriendo en el "
-"nivel de seguridad %s.\n"
-"\n"
-"Este sistema de impresión ejecuta un demonio (proceso en segundo plano) que "
-"espera trabajos de impresión y los gestiona. Las máquinas remotas pueden "
-"acceder también a este demonio a través de la red, así que es un potencial "
-"punto de ataque. Por eso, sólo unos pocos demonios seleccionados se inician "
-"por defecto en este nivel de seguridad.\n"
-"\n"
-"¿Seguro que desea configurar la impresión para esta máquina?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Iniciar el sistema de impresión al arrancar"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"El sistema de impresión (%s) no se iniciará automáticamente cuando arranque "
-"la máquina.\n"
-"\n"
-"Es posible que el inicio automático se desactivó al cambiar a un nivel de "
-"seguridad mayor, porque el sistema de impresión es un potencial punto de "
-"ataques.\n"
-"\n"
-"¿Desea volver a activar el inicio automático de la impresión cuando el "
-"sistema se vuelva a encender?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Verificando software instalado..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Quitando LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Quitando LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Seleccione sistema de impresión (spooler)"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¿Qué sistema de impresión (spooler) desea usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configuración la impresora \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instalando Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opciones de impresión"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Preparando PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Configurando las aplicaciones..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "¿Desea configurar la impresión?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistema de impresión: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Están configuradas las impresoras siguientes. Haga doble clic sobre una para "
-"cambiar sus parámetros; para hacerla la predeterminada; para ver información "
-"acerca de la misma o para hacer que una impresora en un servidor CUPS remoto "
-"esté disponible para Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Están configuradas las impresoras siguientes. Haga doble clic sobre una de "
-"ellas para modificarla, para configurarla como predeterminada, o para "
-"obtener información sobre la misma."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Refrescar la lista de impresoras (para visualizar todas las impresoras CUPS "
-"remotas)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Cambiar el sistema de impresión"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "¿Desea configurar otra impresora?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modificar configuración de la impresora"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Impresora %s\n"
-"¿Qué desea modificar de esta impresora?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "¡Hacerlo!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tipo de conexión de la impresora"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nombre de la impresora, descripción, ubicación"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricante de la impresora, modelo, controlador"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Fabricante de la impresora, modelo"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Poner esta impresora como predeterminada"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Agregar esta impresora a Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Quitar esta impresora de Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Imprimir la(s) página(s) de prueba"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Se sabe cómo usar esta impresora"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Borrar impresora"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Borrando la impresora antigua \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Impresora predeterminada"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impresora \"%s\" ahora es la impresora predeterminada."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Agregando impresora a Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"La impresora \"%s\" se agregó satisfactoriamente a Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "No se pudo agregar la impresora \"%s\" a Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Quitando la impresora de Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"La impresora \"%s\" se quitó satisfactoriamnete de Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "No se pudo quitar la impresora \"%s\" de Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¿Seguro que quiere borrar la impresora \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Borrando la impresora \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuración del proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bienvenido a la herramienta de configuración del proxy.\n"
-"\n"
-"Aquí podrá configurar sus proxies http y ftp con o sin\n"
-"usuario y contraseña.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Por favor, rellene las informaciones del proxy http.\n"
-"Déjelo en blanco si no quiere un proxy http."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "puerto"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "La Url debería empezar por 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "La parte del puerto debería ser numérica"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Por favor, rellene las informaciones del proxy ftp.\n"
-"Déjelo en blanco si no quiere un proxy ftp."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "La Url debería empezar por 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Por favor, introduzca usuario y contraseña del proxy, si es necesario.\n"
-"Déjelo en blanco si no desea usuario/contraseña."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "usuario"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "contraseña"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "contraseña (otra vez)"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Las contraseñas no coinciden. ¡Inténtelo de nuevo!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No se puede añadir una partición al RAID md%d _ya formateado_"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "No se puede escribir el archivo %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "Falló mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Falló mkraid (¿quizás no estén las herramientas de raid (raidtools)?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hay suficientes particiones para un RAID de nivel %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Lanzar el sistema de sonido ALSA (Arquitectura avanzada de sonido de Linux)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un planificador de comandos periódicos."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se usa para monitorizar el estado de las baterías y enviar esa\n"
-"información a syslogd. También puede usarse para apagar el equipo cuando\n"
-"la batería está casi descargada."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ejecuta los comandos programados por el comando at en el momento\n"
-"especificado al lanzar at, y ejecuta comandos por lotes (batch) cuando\n"
-"la carga promedio del sistema es suficientemente baja."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron es un programa UNIX estándar que ejecuta programas especificados por\n"
-"el usuario periódicamente. El cron de Vixie añade varias funcionalidades al "
-"cron de Unix \n"
-"básico, incluyendo una mayor seguridad y opciones de configuración más "
-"potentes."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM añade soporte del ratón para los programas Linux en modo texto, como\n"
-"el Midnight Commander. También permite operaciones de cortar-y-pegar con\n"
-"el ratón en la consola, e incluye soporte para menúes emergentes en la "
-"consola."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake lanza una prueba del hardware, y opcionalmente configura\n"
-"el hardware nuevo/cambiado."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache es un servidor de páginas web. Se usa para servir archivos HTML y "
-"programas CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El demonio para el superservidor de internet (normalmente llamado inetd) "
-"inicia\n"
-"una variedad de servicios adicionales de internet según sea necesario.\n"
-"Es el responsable de iniciar varios servicios, incluyendo telnet, ftp, rsh\n"
-"y rlogin. Al desactivar inetd, se desactivan todos los servicios que "
-"dependen de él."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lanza el filtrado de paquetes para los núcleos de Linux de la serie 2.2,\n"
-"para configurar un cortafuegos que protege a su máquina de los ataques de la "
-"red."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga la definición de teclado que se indica en\n"
-"/etc/sysconfig/keyboard.  Puede ser configurado con el programa kbdconfig.\n"
-"Debe dejarse activo en la mayoría de las máquinas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regeneración automática de la cabecera del núcleo en /boot para\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detección y configuración automática del hardware al arrancar."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf a veces realizará varias tareas al arrancar para\n"
-"mantener la configuración del sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd es el demonio de impresión, necesario para que lpr funcione\n"
-"correctamente. Básicamente, es un servidor que coloca las tareas de\n"
-"impresión en las colas de impresión adecuadas para cada impresora."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El servidor virtual de Linux (LVS) se usa para construir servidores de alto\n"
-"rendimiento y alta disponibilidad."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) es un servidor de nombres de dominio (DNS) usado para convertir "
-"los nombres de máquinas en direcciones IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta y desmonta todos los puntos de montaje de sistemas de archivos\n"
-"compartidos por medio de la red; como NFS (Network File System),\n"
-"SMB (Lan Manager/Windows) y NCP (Netware)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva todas las interfaces de red configuradas para iniciarse\n"
-"en el arranque del sistema."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de servidor NFS, que se "
-"configura\n"
-"a través del archivo /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de bloqueo de archivos por NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activar el bloqueo numérico automáticamente bajo la consola y\n"
-"XFree al arrancar."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Admitir las win-impresoras OKI 4w y compatibles."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"El soporte PCMCIA se usa por lo general para admitir cosas como tarjetas\n"
-"de red o módems en ordenadores portátiles.  No se iniciará salvo que\n"
-"esté configurado, por lo que no es un problema tenerlo instalado\n"
-"en máquinas que no lo necesiten."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El portmapper gestiona las conexiones RPC; que usan protocolos como\n"
-"NFS y NIS. El servidor portmap se debe estar ejecutando en los sistemas que "
-"actúan\n"
-"como servidores para protocolos que usan el mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix es un agente de transporte de correo (MTA), es decir el programa "
-"encargado de enviar el correo electrónico de una máquina a otra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda y recupera el mecanismo de entropía del sistema; usado para la\n"
-"generación de números aleatorios de gran calidad."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Asignar dispositivos 'crudos' a dispositivos de bloque (como las "
-"particiones\n"
-"de los discos), para usar aplicaciones como Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El demonio routed permite actualizar automáticamente las tablas de "
-"enrutamiento IP\n"
-"gracias al protocolo RIP. Mientras que RIP se usa bastante en redes "
-"pequeñas,\n"
-"para redes más complejas, se necesitan protocolos de enrutamiento más "
-"complejos."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocolo rstat permite a los usuarios de una red recoger\n"
-"información sobre el rendimiento de cualquier máquina de dicha red."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocolo rusers permite que los usuarios de una red identifiquen\n"
-"quien está conectado en otras máquinas que respondan."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"El protocolo rwho permite que los usuarios remotos obtengan una lista\n"
-"de todos los usuarios conectados a una máquina que ejecuta el demonio rwho\n"
-"(similar al finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Lanza el sistema de sonido en su máquina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog es el servicio a través del que varios demonios van a enviar\n"
-"sus mensajes de registro, que syslog va a redirigir a varios archivos\n"
-"de registro(log).  Es una buena idea ejecutar siempre syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carga los controladores para sus dispositivos USB."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia el servidor de tipografías X11 (obligatorio para correr XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Seleccione qué servicios se deben iniciar automáticamente al arrancar"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Imprimiendo"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Compartir archivos"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Administración remota"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Servidor de base de datos"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servicios: %d activados de %d registrados"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servicios"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "corriendo"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servicios y demonios"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"No hay información adicional para\n"
-"este servicio. Disculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Al iniciar"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Iniciar"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Parar"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Gracias por elegir Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Bienvenido al mundo del Código Abierto (Open Source)"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"El éxito de MandrakeSoft se basa en el principio del Software Libre. Su "
-"sistema operativo es el resultado del trabajo colaborativo de parte de la "
-"Comunidad Linux mundial"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Únase al mundo del Software Libre"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Conozca a la comunidad Open Source y sea un miembro. Aprenda, enseñe, y "
-"ayude a otros uniéndose a los foros de discusión que encontrará en nuestras "
-"páginas web para la \"Comunidad\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet y Mensajería"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 le brinda la mejor selección de software para acceder a "
-"todo lo que tiene para ofrecer la Internet: Navegue la web y vea animaciones "
-"con Mozilla y Konqueror, intercambie correo-e y organice su información "
-"personal con Evolution y KMail, y mucho más"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedios y Gráficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"¡Mandrake Linux 8.2 le permitirá llevar a su computadora multimedios al "
-"límite! Use el último software para reproducir música y archivos de audio, "
-"edite y organice sus imágenes y fotos, mire TV y reproduzca vídeos, y mucho "
-"más"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desarrollo"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 es la plataforma de desarrollo definitiva. Descubra el "
-"poder del compilador GNU gcc así como también los mejores entornos de "
-"desarrollo de Código Abierto"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Centro de control de Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"El Centro de Control de Mandrake Linux 8.2 es un lugar único para "
-"personalizar y configurar su sistema Mandrake por completo"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Interfaces de usuario"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 brinda 11 entornos de escritorio gráficos y "
-"administradores de ventanas distintos para elegir, incluyendo a GNOME 1.4, "
-"KDE 2.2.2, Window Maker 0.8, y otros"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Software de servidor"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Transforme su máquina en un servidor potente con unos pocos clic del ratón: "
-"servidor web, de correo, cortafuegos, router, servidor de archivos e "
-"impresoras, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Juegos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 brinda lo mejor en juegos de Código Abierto - arcade, "
-"acción, naipes, deportes, estrategia, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"¿Desea aprender Linux de manera simple, rápida, y gratis? MandrakeSoft le "
-"proporciona entrenamiento libre en Linux, así como también una manera de "
-"probar su progreso, en MandrakeCampus -- nuestro centro de entrenamiento en "
-"línea"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"El soporte de calidad de la Comunidad Linux, y de MandrakeSoft, está "
-"simplemente a la vuelta de la esquina. y si ya es un veterano de Linux, "
-"conviértase en \"Experto\" y comparta su conocimiento en nuestro sitio web "
-"de soporte"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Nuestros consultores están listos para analizar sus necesidades y ofrecerle "
-"una solución persoanlizada para todos sus proyectos de IT. Aproveche la "
-"vasta experiencia de MandrakeSoft como productor de Linux para brindar una "
-"alternativa IT verdadera para su organización de negocios"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"En nuestra tienda electrónica en línea están disponibles el rango completo "
-"de soluciones Linux, así como también ofertas especiales sobre los productos "
-"y otras \"cositas\""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Para más información sobre los Servicios Profesionales de MandrakeSoft y las "
-"ofertas comerciales, por favor vea la página web siguiente:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instalando paquetes..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"No se puede leer su tabla de particiones, está demasiado deteriorada :-(\n"
-"Se intentará ir poniendo en blanco las particiones malas"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "¡Error!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "No se encuentra el archivo de imagen `%s' necesario."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configurador de Instalación Automática"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Está a punto de configurar el un disquete de Instalación Automática. Esta "
-"característica es algo peligrosa y debe ser utilizada con cuidado.\n"
-"\n"
-"Con esa característica, podrá repetir la instalación que ha realizado en "
-"esta computadora, y se le consultará interactivamente en algunos pasos, para "
-"poder cambiar los valores de los mismos.\n"
-"\n"
-"Para máxima seguridad, el particionado y formateado nunca será realizado "
-"automáticamente, sin importar lo que eligió durante la instalación de esta "
-"computadora.\n"
-"\n"
-"¿Desea continuar?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configuración de pasos automáticos"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Por favor, elija para cada paso si desea que se repita como su instalación, "
-"o el mismo será manual"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Bienvenido.\n"
-"\n"
-"Los parámetros de la instalación automáticas están disponibles en las "
-"secciones de la izquierda"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "¡Felicidades!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquete ha sido generado satisfactoriamente.\n"
-"Ahora puede repetir su instalación."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Instalación automática"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Añadir un elemento"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Borrar el último elemento"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                  Reporte de DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"               Reporte del servidor DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"           Detalles del reporte de DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progreso total"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Respaldar archivos del sistema..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Respaldar archivos del disco rígido..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Respaldar archivos de usuario..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Progreso de respaldo del disco rígido..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Respaldar otros archivos..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"Lista de archivos envíada por FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problema en la conexión FTP. No fue posible enviar sus archivos de copia "
-"de seguridad por FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Error durante el envío de correo. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Selección de archivos."
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Seleccione los archivos o directorios y haga clic sobre 'Agregar'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Por favor, verifique todas las opciones que necesita.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Estas opciones pueden respaldar y restaurar todos los archivos en el "
-"directorio /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Respaldar archivos del sistema. (directorio /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Usar repaldo incremental (no reemplazar respaldos antiguos)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "No incluir archivos críticos (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Con esta opción podrá restaurar cualquier versión de su\n"
-"directorio /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Por favor, marque a todos los usuarios que desa incluir en la copia de "
-"respaldo"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "No incluir el cache del navegador"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Quitar los seleccionados."
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Usuarios"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Usar conexión FTP para realizar copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Por favor, ingrese el nombre o la IP del host"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Por favor, ingrese el directorio en este host para\n"
-" guardar la copia de respaldo."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Por favor, ingrese su nombre de usuario (login)"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Por favor, ingrese su contraseña"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Recordar esta contraseña"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Conexión FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Conexión segura"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Usar CD/DVDROM para la copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Por favor, elija el espacio de su CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Por favor, verifique que está utilizando un soporte CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Por favor, verifique si desea borrar su CDRW primero"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Por favor verifique si desea hacer que su\n"
-" CD arranque."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo de\n"
-" su grabadora de CD, ej: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Usar cinta para realizar respaldo"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo a utilizar para el respaldo"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Por favor, ingrese el tamaño máximo\n"
-" permitido para Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Por favor, ingrese el directorio a guardar:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Usar cuota para archivos de respaldo"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Red"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Disco rígido / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "Cada hora."
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "Cada día."
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "Cada semana."
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "Cada mes."
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Usar servidor"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Por favor, elija el intervalo de\n"
-" tiempo entre cada copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Por favor, elija el soporte\n"
-"para la copia de respaldo."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Usar el disco rígido con servidor"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Usar FTP con servidor"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Por favor, asegúrese que el servidor cron está incluído entre sus servicios."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Enviar reporte por correo-e luego de cada respaldo a :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Qué"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Dónde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Cuándo"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Más opciones"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Configuración de Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Por favor, elija dónde desea realizar la copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "en disco rígido"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "a través de la red"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Por favor, elija qué desea respaldar"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Respaldar el sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Respaldar usuarios"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Seleccionar manualmente el usuario"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Fuentes de respaldo: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Archivos del sistema:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Archivos de usuario:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Otros archivos:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Guardar en el disco en la ruta : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Guardar por FTP en el host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nombre de usuario: %s\n"
-"\t\t en ruta: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opciones:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNo incluir archivos del sistema\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tRespaldar usando tar y bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tRespaldar usando tar y gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Servidor (%s) incluye :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disco rígido.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Red por FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Red por SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Sin configuración, por favor haga clic sobre el Asistente o Avanzado.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista de datos a restaurar:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista de datos corruptos:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Por favor, desmarque o quítelo la próxima vez."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Los archivos de respaldo están corruptos"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Todos los datos seleccionados han sido        "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "       Recuperados satisfactoriamente en %s"
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "    Configuración de la restauración"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Se pueden restaurar los otros archivos."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista de usuarios a restaurar (sólo importa la fecha más reciente por "
-"usuario)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Respaldar los archivos del sistema anteriores a:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Por favor, elija la fecha para restaurar"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Usar el disco rígido para copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Restaurar desde el disco rígido."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-"Por favor, ingrese el directorio donde se almacenan las copias de respaldo"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Elija otro soporte desde el cual restaurar"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Otros soportes"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Restaurar archivos del sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Restaurar usuarios"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Restaurar otros"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "seleccione la ruta para restaurar (en vez de /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Realizar respaldo nuevo antes de restaurar (sólo para respaldos "
-"incrementales)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Borrar directorios de los usuarios antes de restaurar."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Restaurar todas las copias de respaldo"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Restauración personalizada"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Ayuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Guardar"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Realizar copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurar"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Siguiente"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Por favor, realize la copia de respaldo antes de restaurarla...\n"
-" o verifique que la ruta para almacenar es correcta."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Error enviando correo con sendmail\n"
-"  su correo-e de reporte no se envió\n"
-"  Por favor, configure a sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista de paquetes a instalar"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Error enviando el archivo por FTP.\n"
-" Por favor, corrija su configuración de FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Por favor, seleccione los datos a restaurar..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Por favor, seleccione el soporte para la copia de respaldo..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Por favor, elija los datos a respaldar..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"No se econtró el archivo de configuración,\n"
-" por favor haga clic sobre Asistente o Avanzado."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "En desarrollo ... por favor, espere."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Respaldar archivos del sistema"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Respaldar archivos de usuarios"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Respaldar otros archivos"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Progreso total"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Envío de archivos por FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Enviando archivos..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista de datos a incluir en el CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Por favor, ingrese la velocidad de la grabadora de CDs"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo de su grabadora de CDs (ej: "
-"0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Por favor, verifique si desea hacer que su CD arranque."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Respaldar Ahora desde archivo de configuración"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ver configuración del respaldo"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configuración del Asistente"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Configuración avanzada"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Respaldar Ahora"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"descripción de las opciones:\n"
-"\n"
-" En este paso Drakbackup le permite cambiar:\n"
-"\n"
-" - El modo de compresión:\n"
-"    \n"
-"      Si marca compresión bzip2, comprimirá mejor sus datos\n"
-"      que gzip (alrededor del 2-10 %).\n"
-"      Por defecto, esta opción no está marcada dado que este\n"
-"      modo de compresión necesita más tiempo (100 veces más)\n"
-" \n"
-" - El modo de actualización:\n"
-"\n"
-"      Esta opción actualizará su respaldo, pero no es\n"
-"      realmente útil ya que necesita descomprimirlo\n"
-"      antes que pueda actualizarlo.\n"
-"      \n"
-" - el modo .backupignore:\n"
-"\n"
-"      Al igual que cvs, Drakbackup ignorará todas las referencias\n"
-"      incluídas en los archivos .backupignore de cada directorio.\n"
-"      ej: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Algunos errores con sendmail son causados por\n"
-" una configuración mala de postfix. Para resolverlo tiene\n"
-" que configurar myhostname o mydomain en /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"descripción de las opciones:\n"
-"\n"
-" - Respladar archivos del sistema:\n"
-"       \n"
-"\tEsta opción permite respaldar su directorio /etc, que\n"
-"\tcontiene todos los archivos de configuración. Por favor\n"
-"\ttenga cuidado durante la restauración de no sobre-escribir:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Respaldar archivos de usuario:\n"
-"\n"
-"\tEsta opción permite seleccionar todos los usuarios que\n"
-"\tdesea respaldar.\n"
-"\tPara preservar espacio, se recomienda no incluir el\n"
-"\tcache del navegador web.\n"
-"\n"
-" - Respaldar otros archivos:\n"
-"\n"
-"\tEsta opción permite añadir más datos a guardar.\n"
-"\tCon el otro respaldo no es posible, por ahora,\n"
-"\tseleccionar el respaldo incremental.\t\t\n"
-" \n"
-" - Respaldo incremental:\n"
-"\n"
-"\tEl respaldo incremental es la opción más potente.\n"
-"\tLe permite respaldar todos sus datos la primera\n"
-"\tvez, y luego sólo aquellos que cambiaron.\n"
-"\tLuego, podrá, durante la etapa de restauración,n\trestaurar sus datos "
-"desde una fecha especificada.\n"
-"\t\n"
-"\tSi no ha seleccionado esta opción todos los\n"
-"\trespaldos antiguos se borran antes de volver a respaldar.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"descripción de la restauración:\n"
-" \n"
-"Sólo se utilizará la fecha más reciente, ya que con respaldos\n"
-"incrementales sólo es necesario restaurar de uno de los antiguos.\n"
-"\n"
-"Por lo tanto, si no desea restaurar un usuario, por favor desmarque\n"
-"su casilla.\n"
-"\n"
-"En caso contrario, sólo puede seleccionar alguno de éstos\n"
-"\n"
-" - Respaldos incrementales:\n"
-"\n"
-"\tEl respaldo incremental es la opción más potente.\n"
-"\tLe permite respaldar todos sus datos la primera\n"
-"\tvez, y luego sólo aquellos que cambiaron.\n"
-"\tLuego, podrá, durante la etapa de restauración,\n"
-"\trestaurar sus datos desde una fecha especificada.\n"
-"\tSi no ha seleccionado esta opción todos los\n"
-"\trespaldos antiguos se borran antes de volver a respaldar...\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita.fr>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-"                                            _____________________\n"
-"\n"
-"Descripción:\n"
-"\n"
-"  Drakbackup se usa para respaldar su sistema.\n"
-"  Durante la configuración puede seleccionar:\n"
-"\t- Archivos del sistema,\n"
-"\t- Archivos de usuarios,\n"
-"\t- Otros archivos.\n"
-"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
-"\n"
-"  Drakbackup le permite respaldar su sistema sobre:\n"
-"\t- Disco rígido.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cinta.\n"
-"\n"
-"  Drakbackup le permite restaurar su sistema a un\n"
-"  directorio seleccionado por el usuario.\n"
-"\n"
-"  Predeterminadamente se almacenarán los respaldos en su\n"
-"  directorio /var/drakbackup.\n"
-"\n"
-"  Archivo de configuración:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Paso de restauración:\n"
-"  \n"
-"  Durante la restauración, DrakBackup quitará su \n"
-"  directorio original y verificará que todos \n"
-"  los archivos de respaldo no estén corruptos. Se \n"
-"  recomienda que haga un último respaldo antes de restaurar.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"descricpión de las opciones:\n"
-"\n"
-"Por favor, tenga cuidado cuando use respaldos por ftp, porque\n"
-"sólo los respaldos ya hechos se envían al servidor.\n"
-"Por el momento, necesita realizar el respaldo en su disco rígido\n"
-"antes de enviarlo al servidor.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemas durante la restauración:\n"
-"\n"
-"Durante el paso de restauración, Drakbackup verificará todos los\n"
-"archivos de respaldo antes de restaurarlos.\n"
-"Antes de la restuaración, Drakbackup quitará el\n"
-"directorio original, y perderá todos los datos en el mismo.\n"
-"Es importante ser cuidadoso y no modificar los archivos de\n"
-"datos de respaldo a mano.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Descripción:\n"
-"\n"
-"  Drakbackup se usa para respaldar su sistema.\n"
-"  Durante la configuración puede seleccionar:\n"
-"\t- Archivos del sistema,\n"
-"\t- Archivos de usuarios,\n"
-"\t- Otros archivos.\n"
-"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
-"\n"
-"  Drakbackup le permite respaldar su sistema sobre:\n"
-"\t- Disco rígido.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cinta.\n"
-"\n"
-"  Drakbackup le permite restaurar su sistema a un\n"
-"  directorio seleccionado por el usuario.\n"
-"\n"
-"  Por defecto, se almacenarán los respaldos en su\n"
-"  directorio /var/lib/drakbackup.\n"
-"\n"
-"  Archivo de configuración:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Paso de restauración:\n"
-"  \n"
-"  Durante la restauración, DrakBackup quitará su \n"
-"  directorio original y verificará que todos \n"
-"  los archivos de respaldo no estén corruptos. Se \n"
-"  recomienda que haga un último respaldo antes de restaurar.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Falló la instalación de %s. Ocurrió el siguiente error:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Buscar tipografías instaladas"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Desmarcar las tipografías instaladas"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "analizar todas las tipografías"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "no se encontraron tipografías"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hecho"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "no se pueden encontrar tipografías en las particiones montadas"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Volver a seleccionar tipografías correctas"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "no se pueden encontrar tipografías.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Buscar tipografías en la lista de instaladas"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copiar tipografías"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalación de tipografías True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "por favor, espere mientras corre ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Instalación de True Type realizada"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Conversión de tipografías"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "Construyendo Type1"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Referenciando a Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Conversión de tipografías TTF"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Conversión de tipografías PFM"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Suprimir archivos temporales"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Reiniciar XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Suprimir archivos de tipografías"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "Reiniciar XFS"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Antes de instalar cualquier tipografía, asegúrese que tiene derecho de "
-"usarlas\n"
-"e instalarlas en su sistema.\n"
-"\n"
-"-Puede instalar las tipografías usando la manera normal. En casos raros,\n"
-"puede ser que tipografías \"falsas\" congelen a su servidor X."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importación de tipografías"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Obtener tipografías de Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Desinstalar tipografías"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Opciones avanzadas"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista de tipografías"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elija las aplicaciones que soportarán las tipografías:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Impresoras genéricas"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Seleccione el archivo o directorio de tipografías y haga clic sobre 'Agregar'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalar lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "haga clic aquí si está seguro."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "aquí si no lo está."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Deseleccionar todas."
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Seleccionar todas."
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Quitar lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Pruebas iniciales"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copiar tipografías en su sistema"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalar y convertir tipografías"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-instalación"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Quitar tipografías de su sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-desinstalación"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Compartir la conexión a Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ahora, la conexión compartida a Internet está activada ahora"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuración de la conexión compartida a Internet.\n"
-"Ahora está activa.\n"
-"\n"
-"¿Qué desea hacer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "rechazar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Desactivando los servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ahora, la conexión compartida a Internet está inactiva."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ahora, la conexión compartida a Internet está desactivada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuración de la conexión compartida a Internet.\n"
-"Ahora está inactiva.\n"
-"\n"
-"¿Qué desea hacer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activando los servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ahora, la conexión compartida a Internet está activa."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Puede configurar su ordenador para compartir su conexión a Internet.\n"
-"Con esta característica, otras máquinas de su red local podrán usar la "
-"conexión a Internet de este ordenador.\n"
-"\n"
-"Aviso: necesita un adaptador de red dedicado para configurar una red de área "
-"local (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaz %s (usando el módulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaz %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "¡No hay ningún adaptador de red en su sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No se ha detectado ningún adaptador de red en su sistema. Por favor, ejecute "
-"la herramienta de configuración del hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfaz de red"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sólo hay un adaptador de red configurado en su sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Se va a configurar su red de área local con ese adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Por favor, elija qué adaptador de red estará conectado a su red de área "
-"local."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interfaz de red ya configurada"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Atención, el adaptador de red (%s) ya está configurado.\n"
-"\n"
-"¿Desea volver a configurarlo automáticamente?\n"
-"\n"
-"Puede hacerlo manualmente pero necesita saber lo que está haciendo."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Volver a configurar automáticamente"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Mostrar la configuración corriente de la interfaz"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Configuración corriente de `%s':\n"
-"\n"
-"Red: %s\n"
-"Dirección IP: %s\n"
-"Atributo IP: %s\n"
-"Controlador: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Puedo mantener su configuración corriente y asumir que ya configuró un "
-"servidor DHCP; en ese caso, por favor verifique que leo correctamente la Red "
-"Clase C que usó para su red local; no la volveré a configurar y no tocaré la "
-"configuración de su servidor DHCP.\n"
-"\n"
-"Caso contrario, puedo volver a configurar su interfaz y (volver a)configurar "
-"un servidor DHCP por Ud.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Red Local Clase C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP de (este) servidor DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Volver a configurar la interfaz y el servidor DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La red local no finalizó con `.0', saliendo."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"¡Se encontró un conflicto potencial de direcciones LAN en la configuración "
-"de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "¡Se detectó la configuración del cortafuegos!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"¡Atención! Se ha detectado la configuración del cortafuegos existente. Puede "
-"que necesite algún ajuste manual tras la instalación."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando los scripts, instalando el software, iniciando los servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas al instalar el paquete %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Se ha configurado todo.\n"
-"Ahora puede compartir su conexión a Internet con otros ordenadores de su red "
-"de área local, usando la configuración automática de la red (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuración ya se ha hecho, pero ahora está desactivada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuración ya se ha hecho, y ahora está activada."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No se ha configurado la conexión compartida a Internet."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuración de la conexión compartida a Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"¡Bienvenido a la herramienta para compartir la conexión a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Haga click sobre Configurar para lanzar el asistente de configuración."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuración de la red (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Borrar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a borrar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nuevo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nombre del perfil a crear (el perfil nuevo se crea como copia del actual):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nombre de la máquina: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acceso a Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasarela:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfaz:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Por favor, espere"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar el acceso a Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuración de la red local"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Controlador"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaz"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Estado"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar la red de área local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Haga clic aquí para lanzar el asistente ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Asistente..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Espere, por favor... Aplicando la configuración"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Conectado"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "No conectado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desconectar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Atención, se ha detectado otra conexión con la Internet, tal vez está usando "
-"su red"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"No tiene configurada ninguna interfaz.\n"
-"Configure la primera haciendo clic sobre 'Configurar'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuración LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo de arranque"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado al arranque"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "activar ahora"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "desactivar ahora"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Todavía no se ha configurado esta interfaz.\n"
-"Lance el asistente de configuración en la ventana principal"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"No tiene ninguna conexión a Internet.\n"
-"Primero debe crear una haciendo clic sobre 'Configurar'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuración de la conexión a Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuración de la conexión a Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de conexión: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parámetros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasarela"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Tarjeta ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Definiendo el nivel de seguridad"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de control"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elija la herramienta que desea usar"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canadá (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "EEUU (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "EEUU (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "EEUU (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japón (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japón (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europa del este"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europa del oeste"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nueva Zelanda"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Sudáfrica"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Por favor,\n"
-"teclee su norma de tv y país"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norma de TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "�rea:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Buscando canales de TV, en progreso ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Buscando canales de TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "¡No se detectó tarjeta de TV!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"No se detectó tarjeta de TV en su máquina. Por favor, verifique que tiene conectada correctamente una tarjeta de vídeo/TV soportada por Linux.\n"
-"\n"
-"\n"
-"Puede visitar nuestra base de datos de hardware en:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [teclado]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Seleccione la distribución de su teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "¿Desea que la tecla BackSpace envíe un Delete en la consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cambie el CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor, inserte el CD-ROM de la instalación en su unidad y presione "
-"Aceptar.\n"
-"Si no lo tiene, presione Cancelar para evitar la actualización en vivo."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "¡¡¡ No se puede iniciar la actualización en vivo !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Se ha realizado el cambio, pero no se hará efectivo hasta que salga"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Mostrar sólo para el día seleccionado"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Archivo/_Nuevo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Archivo/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Archivo/_Guardar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>G"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Archivo/Guardar _como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Archivo/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opciones"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opciones/Prueba"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ayuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ayuda/_Acerca de..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Usuario"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Mensajes"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Explicaciones de las herramientas de Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "buscar"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Una herramienta para ver sus archivos de registro (logs)"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Configuración"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "coincidencia"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "pero no hay coincidencias"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Elija un archivo"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendario"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contenido del archivo"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Alerta por correo/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "por favor, espere, analizando el archivo: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configuración de alerta por correo/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bienvenido a la herramienta de configuración del correo/SMS.\n"
-"\n"
-"Aquí podrá configurar su sistema de alerta.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "configuración de servicios"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Recibirá una alerta si se detiene la ejecución de uno de los servicios "
-"seleccionados"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "configuración de la carga"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Recibirá una alerta si la carga es mayor que este valor"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configuración de alerta"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configura la forma en que el sistema le alertará"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Guardar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Seleccione el tipo de su ratón, por favor."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no se encontró ningún usb_serie\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "¿Emular el tercer botón?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "se encontró %s en %s, ¿configurarlo?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Seleccione un escáner."
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "El escáner %s no está soportado"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake no pudo detectar su escáner %s.\n"
-"Por favor, seleccione el dispositivo donde está conectado su escáner"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "elija el dispositivo"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"printerdrake puede configurar este escáner %s.\n"
-"Puede lanzar printerdrake desde el Centro de control de Mandrake en la "
-"sección Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Su escáner %s ha sido configurado.\n"
-"Ahora puede escanear documentos usando \"XSane\" en el menú Multimedios/Gráficos."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuración del cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuración del cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Cortafuegos\n"
-"\n"
-"Ya tiene configurado un cortafuegos.\n"
-"Haga clic sobre Configurar para cambiar o quitar el cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Cortafuegos\n"
-"\n"
-"Haga clic sobre Configurar para configurar un cortafuegos estándar"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Elija su idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Tipo de instalación"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detección del disco rígido"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configuración del ratón"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Elija su teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguridad"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemas de archivos"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formateo de particiones"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Elija los paquetes a instalar"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar el sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Añadir un usuario"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar la red"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Servicios al inicio"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Cargador de arranque"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crear un disco de arranque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configuración de X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Actualiz. del sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Salir de la instalación"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"configurador de tinyfirewall\n"
-"\n"
-"Esto configura un cortafuegos personal para esta máquina Mandrake Linux.\n"
-"Para una solución potente de cortafuegos dedicada, por favor eche un "
-"vistazo\n"
-"a la distribución especializada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ahora le preguntaremos a qué servicios quiere permitir conectarse desde\n"
-"Internet. Por favor, piense cuidadosamente las respuestas, ya que la\n"
-"seguridad de su ordenador es importante.\n"
-"Por favor, si en este momento no está usando alguno de estos servicios,\n"
-"protéjalos. ¡Puede cambiar esta configuración cuando quiera\n"
-"volviendo a ejecutar esta aplicación!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor web en esta máquina que quiere que vea toda\n"
-"Internet? Si está corriendo un servidor web al que sólo necesita acceder\n"
-"desde esta máquina, aquí puede responder con seguridad NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor de nombres en esta máquina? Si no configuró uno\n"
-"para entregar información de IP y de la zona a toda Internet, por favor\n"
-"responda no.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"¿Desea permitir conexiones de entrada de Secure Shell (ssh)? Este es un\n"
-"reemplazo de telnet que puede usar para la entrada al sistema. Si ahora está "
-"usando\n"
-"telnet, definitivamente debería cambiar a ssh. telnet no está cifrado, por\n"
-"lo tanto algunos atacantes pueden robarle su contraseña si lo usa. ssh está\n"
-"cifrado y no permite este tipo de ataque."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"¿Desea permitir conexiones entrantes por telnet?\n"
-"Esto es terriblemente inseguro, como explicamos en la pantalla anterior. Es\n"
-"altamente recomendable responder No aquí y usar ssh en lugar de\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"¿Está corriendo un servidor FTP que debe ser accesible desde Internet?\n"
-"En ese caso, es altamente recomendable que sólo lo use para transferencias\n"
-"anónimas. Algunos atacantes pueden robar cualquier contraseña enviada por "
-"FTP,\n"
-"ya que FTP tampoco usa cifrado para transferir las contraseñas.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor de correo? Si envía sus mensajes con pine, "
-"mutt \n"
-"o cualquier otro cliente de correo de modo texto, probablemente sí.\n"
-"En caso contrario, debería proteger esto con el cortafuegos.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"¿Está corriendo un servidor POP o IMAP? Estos deberían ser\n"
-"usados para almacenar cuentas de correo no basadas en web para las\n"
-"personas en esta máquina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Parece que está ejecutando un núcleo 2.2. Si una computadora en su casa\n"
-"o en la oficina configura su dirección IP de red automáticamente\n"
-"(asignación dinámica), debemos permitir esto. ¿Es este el caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"¿El reloj de su computadora está sincronizado al reloj de otra computadora?\n"
-"Mayormente, esto es lo que usan las organizaciones con servidores Unix/"
-"Linux\n"
-"medianamente grandes para sincronizar los tiempos de conexión y cosas así.\n"
-"Si no es parte de una oficina grande y nunca escuchó nada acerca de esto,\n"
-"probablemente no sea su situación."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuración completa. ¿Se pueden escribir estos cambios al disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "No se puede abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "No se puede abrir %s para escribir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "No, no necesito DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Sí, necesito DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "No, no necesito NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Sí, necesito NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "No grabar"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Grabar y Salir"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Asistente para la configuración del Cortafuegos"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "No (proteger esto de la Internet detrás del cortafuegos)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Sí (permitir esto a través del cortafuegos)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Espere por favor... Verificando los paquetes instalados"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Fallo instalando los paquetes necesarios: %s y Bastille.\n"
-" Intente instalarlos a mano."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computadora de Red (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, servidor SMB, servidor proxy, servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estación de trabajo GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Herramientas para su Palm Pilot o su Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estación de trabajo"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Cortafuegos/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Servidor de Información de Red y de Nombres de Dominio"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de Oficina: procesadores de palabras (kword, abiword), plantillas "
-"de cálculo (kspread, gnumeric), visualizadores PDF, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Herramientas de audio: reproductores mp3 o midi, mezcladores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libros y COMOs sobre Linux y Software Libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estación de trabajo KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedios - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de herramientas para correo, noticias, web, transferencia de "
-"archivos, y chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, Bases de Datos"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de base de datos PostgreSQL o MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Herramientas para facilitar la configuración de su computadora"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedios - Sonido"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitarios"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentación"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Herramientas para la consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Servidor de correo Postfix, servidor de noticias Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estación Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estación Multimedios"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuración"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Más escritorios gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"El K Desktop Environment, el entorno gráfico básico con una colección de "
-"herramientas que lo acompañan"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorno gráfico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache y Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Herramientas para crear y grabar CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estación de trabajo de Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gráficos, tales como El Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Bibliotecas de desarrollo C y C++, programas y archivos *.h"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Computadora servidor de red"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correo/Groupware/Noticias"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estación de Juegos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductores y editores de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedios - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de entretenimiento: arcade, tableros, estrategia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de herramientas para leer y enviar correo y noticiar (pine, mutt, "
-"tin...) y para navegar por la Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivado, emuladores, monitoreo"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzas personales"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorno gráfico con un conjunto de herramientas de escritorio y aplicaciones "
-"amigables"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para los distintos protocolos incluyendo a ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Pasarela de acceso a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas de reproducción/edición de sonido y vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Otros entornos gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, manipulación de archivos, terminales"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para administrar sus finanzas, tales como gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Administración de la información personal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedios - Grabación de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estación de trabajo Científica"
diff --git a/perl-install/share/po/et.po b/perl-install/share/po/et.po
deleted file mode 100644
index d088213a6..000000000
--- a/perl-install/share/po/et.po
+++ /dev/null
@@ -1,14194 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Riho Kurg <rx@linux.ee>, 1999-2001.
-# 
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-10-28 19:54+0200\n"
-"Last-Translator: Riho Kurg <rx@linux.ee>\n"
-"Language-Team: Estonian <et@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Seadista kõik monitorid sõltumatult"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Kasuta Xinerama laiendusi"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Seadista ainult kaart \"%s\" (%s)"
-
-#
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Mitme monitori seadistamine"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Süsteemis on võimalik kasutada mitut monitori.\n"
-"Mida Te soovite teha?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Graafikakaart"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Valige graafikakaart"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Millise XFree konfiguratsiooni soovite kasutada?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"XFree %s toetab Teie videokaarti ja võib omada paremat 2D tuge."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Teie kaardi 3D graafikakiirendit toetab XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s koos 3D graafikakiirendi toega"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA VÕIB OLLA EBASTABIILNE."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s koos EKSPERIMENTAALSE 3D kiirendi toega"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA VÕIB OLLA EBASTABIILNE.\n"
-"Teie kaarti toetab ka XFree %s, millel on ehk parem 2D tugi."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree sätted"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Valige graafikamälu suurus"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Valige monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Kaks kriitilist suurust on ekraanisagedus, mis määrab kogu kuva\n"
-"uuendamise aja ja realaotussagedus\n"
-"\n"
-"On VÄGA TÄHTIS, et Te ei määraks siinkohal monitori, mille realaotus on\n"
-"suurem kui Teie monitor võimaldab. Vastasel juhul võib Teie monitor hävida.\n"
-"Kui kahtlete, valige pigem väiksem väärtus."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Realaotussagedus"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Ekraaniuuendussagedus"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Graafikakaart ei ole veel seatud"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Kuvatihedus ei ole veel seatud"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Hoiatus: testimine võib Teie arvuti peatada"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Proovime seadistusi"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"proovige mõnd parameetrit muuta"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tekkis mingi viga:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Jätkub %d sekundi pärast"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Kas see on õige?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tekkis mingi viga, proovige mõnd parameetrit muuta"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Kuvatihedus"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Valige kuvatihedus ja värvisügavus"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Graafikakaart: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Veel.."
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertresiim"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Näita kõike"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Kuvatihedused"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klaviatuuriasetus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiire tüüp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiire port: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Realaotussagedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekraanisagedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Graafikakaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Graafikakaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Videomälu: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Värvisügavus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Kuvatihedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 juhtprogramm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Valmistume X-i seadistamiseks"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mida Te soovite teha?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Muuda monitori"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Muuda graafikakaardi"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Muuda serveri parameetreid"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Muuda kuvatihedust"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Näita lisainfot"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Proovi veel"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Välju"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Säilita muutused?\n"
-"Olemasolevad sätted:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X stardib nüüd"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Teie arvutis on võimalik käivitada X juba alglaadimisel.\n"
-"Kas soovite nii teha?"
-
-# c-format
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Muudatuste aktiveerimiseks käivitage %s uuesti"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Palun väljuge ja vajutage siis Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 värvi (8 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhat värvi (15 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhat värvi (16 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljonit värvi (24 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardit värvi (32 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB või rohkem"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA, 640x400 sagedusel 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "SVGA, 800x600 sagedusel 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-ühilduv, 1024x768, 87 Hz vahelejätuga "
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768, 87 Hz vahelejätuga, 800x600, 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA, 800x600 sagedusel 60 Hz, 640x480 sagedusel 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA, 1024x768 sagedusel 60 Hz, 800x600 sagedusel 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Kõrgsageduslik SVGA, 1024x768, 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Partitsiooni algusesse"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ketta algusesse (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO installimine"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kuhu soovite alglaaduri installida"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installimine"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO tekstiresiimis"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO graafikaresiimis"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Laadimine DOS/Windowsist (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Alglaaduri peasätted"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Eelistatav alglaadur"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Alglaaduri peasätted"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Alglaadimisseade"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ei tööta vanema BIOSi korral)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktne"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktne"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Graafikamood"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Ooteaeg alglaadimisel"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Salasõna"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Salasõna (uuesti)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Piira käsurea suvandeid"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "piiratud"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Puhasta /tmp igal laadimisel"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Kui vaja, täpsusta RAM suurust (leitud %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Võimalda mitut profiili"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Anna mälu suurus megabaitides"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Säte ``Piira käsurea suvandeid'' on ilma salasõnata mittekasutatav"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Palun proovige veel"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Salasõnad ei klapi"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Initsialiseerimisteade"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware viivitus"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Ajapiirang kerneli laadimisel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD-lt laadimine lubatud?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF laadimine lubatud?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Vaikimisi OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Praegu on kasutusel sellised kirjed.\n"
-"Te võite neid lisada ning olemasolevaid muuta."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Lisa"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Tehtud"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Modifitseeri RAIDi"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Millisele sektorile soovite seda tõsta?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Muu OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Muu OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Muu OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Laadefail"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Juur"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Lisada"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Ebaturvaline"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Tähis"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Vaikimisi"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd suurus"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Eemalda kirje"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tühi kirjetähis ei ole lubatud"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Teil peab olema saaleala"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Selline tähis on juba kasutusel"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Leiti %s %s liidest"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "On Teil veel kaarte?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Kas Teil on ikka mõni %s liides?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Jah"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Info riistvara kohta"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installime juhtprogrammil %s kaardile %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(moodul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Millist %s juhtprogrammi peaksime proovima?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Mõnedel juhtudel vajab %s juhtprogramm tööks lisainformatsiooni\n"
-"kuigi tavaliselt saab ka ilma hakkama. Kas soovite eraldi parameetreid\n"
-"määratleda või lasta juhtprogrammil ise Teie arvutit kompida? Võib juhtuda,\n"
-"et see viib arvuti segadusse kuid ei tohiks mingit jäävat kahju teha."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Proovida niisama"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Määrake parameetrid"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nüüd võite moodulile %s parameetreid määrata.\n"
-"Parameetrid on vormingus \"nimi=väärtus nimi2=väärtus2 ...\".\n"
-"Näiteks: \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Mooduli parameetrid:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Moodule %s laadimine ei õnnestunud.\n"
-"Kas soovite proovida parameetreid muuta?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(juba lisatud %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Salasõna on liiga lihtne"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Palun andke kasutajatunnus"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Kasutajatunnus tohib sisaldada ainult väikesi tähti, numbreid, - ja _"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "See kasutajatunnus on juba lisatud"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Lisa kasutaja"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sisesta kasutaja\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Kasutaja õige"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pärisnimi"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Kasutajatunnus"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Käsurida"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Vaikimisi sisenemine"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Teie arvutit saab seada vaikimisi kasutaja sisenemisele.\n"
-"Kui Te seda ei soovi, valige <Katkesta>"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Valige uus vaikimisi kasutaja :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Valige palun käivitatav aknahaldur:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Teisi keeli saab valida pärast installimist"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Kõik"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Tavakasutaja"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Isetehtud"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS käivitatakse"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Valige paketid mida soovite installida"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Katkesta"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Tere tulemast, kräkkerid"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Vähene"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Tavahiir"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Kõrge"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Kõrge"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiline"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Seda tase muudab küll süsteemi lihtsalt kasutatavaks, kui väga\n"
-"haavatavaks: ligipääsupiirangute puudumise tõttu ei peaks arvutit ühendama\n"
-"ei teiste arvutitega ega ka mitte Internetti."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salasõnad on nüüd kasutusel, kuid võrku ühendamine ei ole siiski soovitav."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"See on sobilik turvatase arvutile, mis ühendatakse Internetti kui klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr "Sellel turvatasemel võib süsteemi kasutada Internetis ka serverina."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Süsteem on täielikult suletud. Võrgust kasutamine on võimalik ainult\n"
-"spetsiaalselt loodud juurdepääsuteid kasutades."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Valige turvatase"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Turvataseme seadmine"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Valige X server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Tere tulemast! Laadimisel aitab Teid %s!\n"
-"\n"
-"Valige nimekirjast eelistatav OS,\n"
-"vaikimisi oodake %d sekundit.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tere tulemast! Laadimisel aitab Teid GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kasutage valiku tegemiseks %c ja %c klahve"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Enter laeb Teie valiku, 'e' laseb muuta"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "suvandeid enne laadimist ja 'c' veel enam."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Valik laetakse automaatselt %d sekundi jooksul"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot on liiga täis"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Töölaud"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Startmenüü"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kuhu soovite alglaaduri installida"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "selle kohta (veel) abi ei saa.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fail"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fail/_Välju"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle kategoriseeritud jälgimine"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle jälgimine"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tavaline jälgimine"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditsiooniline Gtk+ jälgimine"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Käivita alglaadimisel Aurora"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Valimisviis"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Alglaadimismood"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Internetiühenduse jagamise Abimees!\n"
-"\n"
-"%s\n"
-"\n"
-"Valige Abimehe käivitamiseks ``OK''"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Seadista"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Töömood"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Käivita X-Windows alglaadimisel"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ei taha automaatselt siseneda"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Jah, soovin automaatset sisselogimist sellele (kasutajale, keskkonnale)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ei saa lugeda faili /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutit"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundit"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Partitsioone ei saa enam lisada"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Teisi keeli saab valida pärast installimist"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Prantsusmaa"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Saksa"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Kreeka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norra"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Vaata"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Itaalia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seerial"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Palun tehke oma andmetest enne tagavarakoopia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lugege hoolega!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Kui soovite kasutada aboot-i, jätke palun ketta algusesse vähemalt 2048 \n"
-"sektorit vaba ruumi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Viga"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Abimees"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Valige tegevus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teil on üks suur FAT partitsioon.\n"
-"(tavaliselt kasutab sellist MS DOS/Windows)\n"
-"Soovitame teil esmalt selle suurust muuta\n"
-"(klikkige ja siis valige \"Muuda\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Üksikasjad"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ühendamine ebaõnnestus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Saaleala"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tühi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Muu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Failisüsteemi tüübid: "
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Tekita"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tüüp"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Kasutage pigem ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Kustuta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Kasutage enne \"Ühenda lahti\""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s tüübi muutmisel hävivad kõik seal olnud andmed"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Valige tegevus"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Looge uus partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Tavakasutaja > Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ekspert > Tavakasutaja"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Tagasi"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jätkate ikkagi?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Lõpeta ilma salvestamata"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Lõpetate ilma partitsioonitabelit salvestamata?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Paiguta ise"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Kustuta kõik"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Meili informatsioon"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Kõik primaarsed partitsioonid on kasutusel"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Partitsioone ei saa enam lisada"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Et saada rohkem partitsioone, kustutage palun üks, et luua laiendatud "
-"partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Kirjuta partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "CD/flopi/.. autoühendamine"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Valige fail"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Tabeli tagavarakoopia ei ole sama suurusega\n"
-"Soovite jätkata?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Hoiatus"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Pange tühi flopi masinasse\n"
-"Kõik andmed sellel hävivad"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Proovin päästa partitsioonitabelit"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Meili informatsioon"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ühenduspunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Eelistused"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Muuda suurust"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Liiguta"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Vorminda"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Ühenda"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Lisa RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Lisa LVMi"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ühenda lahti"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Eemalda RAIDist"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Eemalda LVMist"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifitseeri RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Kasuta loopback-ina"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Looge uus partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Algsektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Suurus (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Failisüsteemi tüüp: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ühenduspunkt:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Eelistus: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Muuda partitsiooni tüüp"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Mis failisüsteemi soovite kasutada?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kuhu soovite loopback-faili %s ühendada?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kuhu soovite seadme %s ühendada?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Seda ühenduspunkti ei saa eemaldada, kuna partitsioon on kasutusel.\n"
-"loopback-ina. Eemaldage enne loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Arvutan FAT failisüsteemi piire"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Muudan suurust"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "See partitsioon ei ole muudetav"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Selle partitsiooni andmetest võiks olla tagavarakoopia"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s suuruse muutmisel hävivad sellel kõik andmed"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Valige uus suurus"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Suurus (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Millisele kettale soovite seda ümber paigutada?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Millisele sektorile soovite seda ümber paigutada?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Paigutan ümber"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Liigutan partitsiooni..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Vali olemasolev RAID, millele lisada"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "uus"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Vali olemasolev LVM, millele lisada"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM nimi?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Seda partitsiooni ei saa loopback-ina kasutada"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "loopback faili nimi:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Pärisnimi"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "See fail on juba loopback-ina kasutusel, valige mõni muu"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fail on juba olemas. Kas kasutan seda?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Mooduli parameetrid:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "seade"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "tase"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ühiku suurus"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vaadake ette: see võib olla ohtlik."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Mis tüüpi partitsioonid teete?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Vabandan, aga ei saa nõustuda /boot kataloogi paigutamisega kaugemale 1024-"
-"st silindrist.\n"
-"Kui kasutate LILO-t, ei tööta see sel moel, kui aga ei kasuta, ei ole Teile "
-"ka /boot vajalik"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partitsioon, mida soovite kasutada juurkataloogi (/) hoidmiseks, asub\n"
-"füüsiliselt tagapool 1024-t silindrit ja Teil ei ole /boot partitsiooni.\n"
-"Kui plaanite kasutada LILO alglaadurit, lisage kindlasti /boot partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Olete valinud juurpartitsiooniks (/) tarkvaralise RAID-i.\n"
-"Ilma /boot partitsioonita ei ole võimalik sellist süsteemi laadida.\n"
-"Lisage kindlasti /boot partitsioon!"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ketta %s partitsioonitabel salvestatakse!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Muudatuste jõustamiseks vajate alglaadimist"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s vormindamisel hävivad sellel kõik andmed"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Vormindan"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Vormindan partitsiooni %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid ebaõnnestus"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Kuvatihedus: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Seade: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS kettatähis: %s (arvatavasti)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tüüp: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nimi: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Algus: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Suurus: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorit"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindrid %d kuni %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Vormindatud\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Vormindamata\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Ühendatud\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "loopback fail(id): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partitsioonilt toimub alglaadimine\n"
-"    (MS-DOS-i, mitte lilo jaoks)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Tase %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ühiku suurus %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-kettad %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "loopback faili nimi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Võimalik, et on tegemist\n"
-"juhtpartitsiooniga, parem oleks\n"
-"seda mitte puutuda.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"See on eriline, alglaadimisel\n"
-"kasutatav partitsioon, mis\n"
-"võimaldab mitme operratsioonisüsteemi\n"
-"laadimist.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Suurus: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geomeetria: %s silindrit, %s pead, %s sektorit\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-kettad %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitsioonitabeli tüüp: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "siinil %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Eelistused: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Failisüsteemi tüüp: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Salasõna on liiga lihtne (peaks olema vähemalt %d tähemärki)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Salasõnad ei klapi"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Muuda partitsiooni tüüp"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Nimeserver"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s vormindamine seadmel %s ebaõnnestus"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ei oska seadet %s vormindada tüüpi %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "viga %s lahti ühendamisel: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "lihtne"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ei ole kasutatav alla 16MB partisioonidel"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ei ole kasutatav alla 32MB partisioonidel"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ühenduspunktid peavad algama kaldkriipsuga (/)"
-
-# c-format
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ühenduspunktile %s on juba üks partitsioon määratud\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Te ei saa ühenduspunkti %s jaoks LVM loogilist ketast kasutada"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "See kataloog peab jääma kokku juurfailisüsteemiga"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "See ühenduspunkt vajab tõelist (ext2, reiserfs) failisüsteemi\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Te ei saa ühenduspunkti %s jaoks LVM loogilist ketast kasutada"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Ei ole piisavalt ruumi automaatpaigutuseks"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Seadme %s avamine kirjutamiseks ebaõnnestus: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tekkis viga: failisüsteemi loomiseks ei leitud ühtki seadet. Palun\n"
-"kontrollige oma riistvara."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Teil ei ole ühtki partitsiooni!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ülalpool on toodud kõik Teie kõvakettal olemasolevad Linuxi partitsioonid\n"
-"Vaikimisi on need enamasti üsna mõistlikud. Kui teete nendes muutusi,\n"
-"pidage meeles, et kindlasti vajate juurpartitsiooni (\"/\"). Liiga väikeste\n"
-"partitsioonide puhul võib tekkida raskusi piisava hulga tarkvara "
-"installimisel\n"
-"Kasutajate jaoks on sageli mõistlik luua eraldi \"/home\" partitsioon.\n"
-"\n"
-"\n"
-"Iga partitsiooni juures on toodud abiinfona \"Nimi\" ja \"Mahutavus\".\n"
-"\n"
-"\n"
-"\"Nimi\" koosneb kõvakettatüübist, selle numbrist ja partitsiooni\n"
-"numbrist (näiteks \"hda1\").\n"
-"\n"
-"\n"
-"Kõvaketta tüüp on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"\n"
-"Kõvaketta number on alati täht \"hd\" või \"sd\" järel. IDE ketastel:\n"
-"\n"
-"   * \"a\" - esmase IDE kontrolleri ülem,\n"
-"\n"
-"   * \"b\" - esmase IDE kontrolleri alluv,\n"
-"\n"
-"   * \"c\" - teisase IDE kontrolleri ülem,\n"
-"\n"
-"   * \"d\" - teisase IDE kontrolleri alluv.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nüüd saate valida, milliseid teenused peaks süsteemi laadimisel käivitama.\n"
-"\n"
-"\n"
-"Abiinfo balloonis antakse lühike kirjeldus igaühe kohta neist.\n"
-"\n"
-"Kui kavatsete oma süsteemi kasutada serverina, olge eriti tähelepanelik:\n"
-"tõenäoliselt ei soovi te käivitada mittevajalikke teenuseid."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Olete jõudnud punkti, kus peate otsustama, kuhu täpselt Mandrake Linux oma\n"
-"kõvakettal paigaldada. Kui kõvaketas on tühi või kui mõni muu \n"
-"operatsioonisüsteem seda täielikult kasutab, on vaja partitsioneerida.\n"
-"Partitsioneerimine on tegevus, mille käigus tekitatakse kettale loogilised\n"
-"piirkonnad Teie uue Mandrake Linux süsteemi installimiseks.\n"
-"\n"
-"\n"
-"Kuna partitsioneerimine ei ole pööratav protsess, siis peab kogemusteta\n"
-"kasutaja olema iseäranis ettevaatlik! Selle tegevuse lihtsustamiseks ja\n"
-"vigade vähendamiseks on Teie jaoks loodudki käesolev abimees. Siiski,\n"
-"palun varuga natuke ettevalmistusaega\n"
-"\n"
-"\n"
-"Mandrake Linux jaoks on Teil vaja vähemalt kaht partitsiooni. Ühele "
-"paigutatakse\n"
-"operatsioonisüsteem ise ja teisele luuakse virtuaalmälu (saaleala e. swap).\n"
-"\n"
-"\n"
-"Kui partitsioonid on juba loodud (eelmise installi või mõne muu vahendi\n"
-"abil), siis peate need lihtsalt Linuxi paigaldamise jaoks välja valima.\n"
-"\n"
-"\n"
-"Kui partitsioone ei ole varem loodud, peate kasutama ülalttoodud abimeest.\n"
-"Abimees hindab Teie kõvaketast ja pakub järgmised valikud:\n"
-"\n"
-"* Kasuta olemasolevaid partitsioone: abimees leidis kettalt Linuxi "
-"partitsioonid.\n"
-"  Kui soovite neid kasutada, valige see.\n"
-"\n"
-"\n"
-"* Puhasta kogu ketas: kui soovite alustada Mandrake Linux installimist "
-"täiesti tühjale kettale.\n"
-"  Tähelepanu: kõik andmed, mis enne kettal olid, hävivad!\n"
-"\n"
-"\n"
-"* Kasuta vaba ruumi Windowsi partitsioonil: kui Microsoft Windows kasutab "
-"kogu Teie kõvaketta vaba pinna,\n"
-"  saate luua lisaruumi Windowsi partitsiooni suuruse muutmisel.\n"
-"  Sageli on see mõistlik, kui soovite kasutada ka Windowst.\n"
-"\n"
-"* Asjatundja: kui soovite ise oma kõvaketast jagada, valige see. Nii on Teil "
-"kõige rohkem võimalusi,\n"
-"  aga ka kõige rohkem ohtusid! Ärge valige seda, kui Te täpselt ei tea, mida "
-"teete."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Kõik värskelt loodud partitsioonid tuleb enne kasutamist vormindada\n"
-"ehk sinna tuleb luua failisüsteemid.\n"
-"\n"
-"\n"
-"Samuti võib vormindada varem olemas olnud partitsioonid, kui soovite\n"
-"seal leiduvad andmed ära kustutada.\n"
-"\n"
-"\n"
-"Paneme tähele, et alati ei ole kõigi vanade partitsioonide vormindamine\n"
-"vajalik.\n"
-"Kindlasti võib vormindada partitsioone, kus varem asus \"/\", \"/usr\"\n"
-"või \"/var\" aga kasutajate faile sisaldav \"/home\" võiks jääda\n"
-"alles.\n"
-"\n"
-"\n"
-"Klikkige \"OK\", kui olete vormindamiseks valmis."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Teie Mandrake Linux süsteemi hakati nüüd installima. Selleks võib\n"
-"olenevalt Teie poolt valitud pakettide arvust ja Teie arvuti kiirusest\n"
-"kuluda mõnikümmend minutit.\n"
-"\n"
-"\n"
-"Palun veidi kannatlikkust."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nüüd peate valima partitsiooni(d), kuhu soovite Mandrake Linux installida.\n"
-"\n"
-"Partitsioon on loogiliselt eraldatud kõvaketta piirkond, mille suurust\n"
-"ei ole võimalik hiljem, töötavas süsteemis enam muuta. Samuti hävivad\n"
-"partitsiooni kustutamisel kõik sellel sisalduvad andmed.\n"
-"\n"
-"Et muuta seda tegevust lihtsamaks, on loodud Abimees, mille soovitused\n"
-"on harilikult mõistlikud.\n"
-"\n"
-"\n"
-"Partitsioonide loomiseks valige esmalt kõvaketas.\n"
-"\n"
-"\n"
-"Valitud ketta partitsioneerimiseks on järgmised võimalused:\n"
-"\n"
-"   * Puhasta kõik: kustutatakse kõik olemasolevad partitsioonid sellel "
-"kettal\n"
-"\n"
-"\n"
-"   * Paiguta ise: sel juhul tekitatakse Linuxi jaoks vajalikud partitsioonid "
-"vabale kettapinnale automaatselt.\n"
-"\n"
-"\n"
-"   * Päästa partitsioonitabel: kui partitsioonitabel on vigastatud, võib "
-"proovida seda parandada. \n"
-"     Palun ärge sellega igaks juhuks palju arvestage.\n"
-"\n"
-"\n"
-"   * Lae uuesti: kui soovite tühistada kõik enda tehtud muutused ja alustada "
-"algse partitsioonitabeliga\n"
-"\n"
-"\n"
-"   * Abimees: kui soovite uue partitsioonitabeli loomisel samm-sammulist "
-"juhatust.\n"
-"     Soovitav, kui ei ole varem midagi sellist teinud.\n"
-"\n"
-"\n"
-"   * Taasta flopilt: kui olete varem salvestanud koopia "
-"partitsioonitabelist\n"
-"     flopile, tuleb see nüüd kasuks\n"
-"\n"
-"\n"
-"   * Salvesta flopile: kui soovite salvestada partitsioonitabeli flopile, "
-"et\n"
-"     vajadusel oleks võimalik sealt taastada.\n"
-"\n"
-"\n"
-"   * Tehtud: kui olete partitsioneerimise lõpetanud, siis saate muutused "
-"nüüd salvestada\n"
-"\n"
-"\n"
-"Valitud partitsioonil on võimalikud järgmised tegevused:\n"
-"\n"
-"           * Ctrl-c uue partitsiooni loomine\n"
-"\n"
-"           * Ctrl-d partitsiooni kustutamine\n"
-"\n"
-"           * Ctrl-m ühenduspunkti seadmine"
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Teie arvuti kõvakettal on rohkem kui üks Microsoft Windows partitsioon.\n"
-"Palun valige välja see, mille suurust soovite Mandrake Linux jaoks muuta.\n"
-"\n"
-"\n"
-"Teie abistamiseks on iga partitsioonidel näidatud \"Nimi Linuxis\", \"Nimi "
-"Windowsis\" ja \"Mahutavus\".\n"
-"\n"
-"\"Nimi Linuxis\" koosneb kõvakettatüübist, selle numbrist ja partitsiooni\n"
-"numbrist (näiteks \"hda1\").\n"
-"\n"
-"\n"
-"Kõvaketta tüüp on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"\n"
-"Kõvaketta number on alati täht \"hd\" või \"sd\" järel. IDE ketastel:\n"
-"\n"
-"   * \"a\" - esmase IDE kontrolleri ülem,\n"
-"\n"
-"   * \"b\" - esmase IDE kontrolleri alluv,\n"
-"\n"
-"   * \"c\" - teisase IDE kontrolleri ülem,\n"
-"\n"
-"   * \"d\" - teisase IDE kontrolleri alluv.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi.\n"
-"\n"
-"\n"
-"\"Nimi Windowsis\" on täht, millega Microsoft Windows vastavat seadet\n"
-"tähistab."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Palun natuke kannatust. Selleks võib kuluda mõnigi minut."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Palun valige \"Installimine\" kui Teie arvutis ei ole varasemat Mandrake "
-"Linux\n"
-"versiooni.\n"
-"\n"
-"\n"
-"Palun valige \"Uuendamine\" kui soovite uuendada varasemat Mandrake Linux "
-"versiooni.\n"
-"\n"
-"\n"
-"Sõltuvalt Teie GNU/Linuxi alastest teadmistest saate valida erineva tasemega "
-"installi- või uuendusmeetodi:\n"
-"\n"
-"* Soovituslik: Te ei ole varem GNU/Linuxit installinud. Kõik tehakse "
-"lihtsaks ja esitatakse vähe küsimusi\n"
-"\n"
-"\n"
-"* Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada vastavalt\n"
-"  Teie vajadustele. Järgmisena saate teha valikud sõltuvalt Teie arvuti \n"
-"  edaspidisest kasutusalast.\n"
-"\n"
-"\n"
-"* Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-"  süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-"  Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA TEETE!"
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Palun valige õige port. Näiteks MS Windows-i COM1 kannab GNU/Linuxis\n"
-"nime ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (ehk LInux LOader) ja Grub on alglaadurid: nad võimaldavad laadida\n"
-"kas GNU/Linuxi või mõne muu Teie arvutis olevad operatsioonisüsteemi.\n"
-"Tavaliselt tuvastakse teised operatsioonisüsteemid õigesti ja seadistatakse\n"
-"ka alglaadur. Kui Teil aga ei ole õnne, tuleb parameetrid seada\n"
-"käsitsi. Olge sel juhul hoolas valima õiged."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Nüüd peate valima, milliselt kettaosalt soovite GNU/Linuxit laadida.\n"
-"\n"
-"Valige \"Kõvaketta esimene sektor (MBR)\", kui ei tea täpselt, mida\n"
-"teha."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Esmalt otsib DrakX PCI siini SCSI liideseid. Kui neid leitakse, ja \n"
-"vastav(ad) juhtprogramm(id) on teada, siis laetakse ja installitakse \n"
-"kõik vajalik automaatselt.\n"
-"\n"
-"\n"
-"Kui Teie SCSI liides kasutab ISA siini või kui DrakX ei tea,\n"
-"millist juhtprogrammi kasutada või Teil ei ole üldse SCSI liidest,\n"
-"siis küsitakse Teilt selle kohta.\n"
-"Kui Teil SCSI liidest tõesti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
-"on, siis vastake \"Jah\". Seejärel lastakse Teil nimekirjast sobiv\n"
-"juhtprogramm valida.\n"
-"\n"
-"\n"
-"Kui olete juhtprogrammi välja valinud, on Teil võimalus anda sellele\n"
-"ka parameetreid. Siiski, enamasti läheb kõik kenasti ka ilma neid\n"
-"sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
-"\n"
-"Kui automaatne parameetrite otsimine ei tööta, tutvuge palun lähemalt\n"
-"oma SCSI liidese dokumentatsiooniga või küsige abi riistvara müüjalt.\n"
-"Vaadake ka User Guide'i (peatükk 2, lõik \"Collective informations on your\n"
-"hardware\")\n"
-"Ka samas masinas olev Windows oskab vahel SCSI kohta kasulikku \n"
-"informatsiooni anda."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Valige kõvaketas, mida soovite Mandrake Linux installimiseks puhastada\n"
-"Ettevaatust, kõik sellel leiduvad andmed hävitatakse ja ei ole enam\n"
-"taastatavad."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Valige \"OK\" kui soovite kustutada kõik sellel kettal asuvad "
-"partitsioonid.\n"
-"Ettevaatust, peale \"OK\" klikkimist ei ole enam võimalik sellelt kettalt\n"
-"andmeid taastada.\n"
-"\n"
-"\n"
-"Katkestamiseks valige \"Katkesta\"."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Üldlevi kasutamine on ilma NIS domeenita võimatu"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Pane FAT formaadis flopi seadmesse %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "See flopi ei ole FAT formaadis"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Et kasutada seda paketivalikut, alustage installimist käsureaga \"linux "
-"defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Viga faili %s lugemisel"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Osa teie riistvarast nõuab tarnijapoolseid juhtprogramme.\n"
-"Informatsiooni nende kohta saate: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Teil peab olema juurpartitsioon.\n"
-"Selleks looge uus partitsioon (või valige üks olemasolevatest).\n"
-"Siis valige tegevus \"Ühenduspunkt\" ja seadke see kui '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Teil peab olema saaleala"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Saaleala ei ole määratud\n"
-"\n"
-"Jätkate ikkagi?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Teil peab olema saaleala"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Kasuta vaba ruumi"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Kasuta olemasolevat partitsiooni"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Kasutatavat partitsiooni ei leitud"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Kasuta Windowsi partitsiooni loopback-ina"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Millisele partitsioonile soovite installida Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Valige suurused"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Juurpartitsiooni suurus (MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Saaleala suurus (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Kasuta vaba ruumi Windowsi partitsioonil"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Mis partitsiooni soovite muuta?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Arvutan Windowsi failisüsteemi piire"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT partitsiooni suurust ei õnnestu muuta, \n"
-"ilmnes selline viga: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Teie Windowsi partitsioon on fragmenteerunud, palun kasutada 'defrag'-i"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HOIATUS!\n"
-"\n"
-"DrakX hakkab Teie Windowsi partitsiooni suurust muutma. Olge ettevaatlik:\n"
-"see operatsioon võib olla ohtlik Teie failidele. Palun kasutage enne\n"
-"scandisk-i, defrag-i ja tehke tagavarakoopia.\n"
-"Kui olete oma otsuses kindel, vajutage OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kui palju ruumi jätate Windowsi jaoks?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partitsioon %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Suuruse muutmine ebaõnnestus: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "Sobivat FAT partitsiooni ei leitud (ei ole piisavalt ruumi)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Tühjenda kogu ketas"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Eemalda Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teil on rohkem kui üks kõvaketas, millisele neis installite Linuxi?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Kettal %s hävivad KÕIK partitsioonid ja andmed"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partitsioneerin ise"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Kasuta fdisk-i"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nüüd saate partitsioneerida %s kõvaketta\n"
-"Kui olete valmis, salvestage käsuga 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Teil ei ole piisavalt vaba ruumi Windowsi partitsioonil"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Installimiseks ei ole üldse ruumi"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX kettajagamise abimees leidis sellised lahendused:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ketta jagamine ebaõnnestus: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Käivitame võrguliidesed"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Seiskame võrguliidesed"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tekkis mingi viga, aga seda ei suuda programm ise klaarida.\n"
-"Jätkake omal vastutusel."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ühenduspunkt %s on määratud topelt"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Mõned tähtsad paketid ei saanud korralikult paika.\n"
-"Teie CD-lugeja või CD on ilmselt vigane.\n"
-"Paketifaile CD-l saate kontrollida käsuga \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "See ongi %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Flopiseade ei ole kättesaadav"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Järgmine samm: '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Teie süsteemil on ressursiprobleeme ja installimine võib ebaõnnestuda.\n"
-"Kui nii juhtub, proovige palun tekstipõhjalist paigaldust. Selleks \n"
-"vajutaga laadimisel F1 ja sisestage 'text'"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installi klass"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Palun valige üks järgnevatest paigaldusklassidest"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Teie poolt valitud gruppide kogusuurus on umbes %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Kui soovite installida sellest vähem, valige vastav protsent.\n"
-"\n"
-"Madalama protsendi puhul installitakse vaid kõige tähtsamad paketid;\n"
-"100%% tähendab kõige valitud pakettide installimist."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, fuzzy, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Teil on kettal ruumi vaid %d%% pakettide jaoks.\n"
-"\n"
-"Kui soovite sellest vähem, valige väiksem protsent ja installimisele\n"
-"kuuluvad vaid olulisemad paketid."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Täpsemalt saate valida järgmisel sammul"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Installitavate pakettide protsent"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paketigruppide valik"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Valik paketthaaval"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Suurus kokku: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Vigane pakett"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versioon: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Suurus: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tähtsus: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Seda paketti ei saa valida, kettaruumi ei ole paigalsuseks piisavalt"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Installimiseks on valitud järgmised paketid"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Eemaldamiseks on valitud järgmised paketid"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Seda paketti ei saa (mitte) valida"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "See pakett on kohustuslik"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "See pakett on juba installitud"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Selle paketi peaks uuendame\n"
-"Olete kindel, et Te ei vali seda?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Selle paketi peate valima, sest selle uuendamine on kohustuslik"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Näita automaatselt valitud pakette"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installimine"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Salvesta flopile"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eemaldamine"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Valige paketid installimiseks"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installin"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Oletan"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Aega jäänud "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Palun oodake, valmistun installimiseks"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketti"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Paketi %s installimine"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Nõus"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Keeldun"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vahetage CD!\n"
-"\n"
-"Palun sisestage CD pealdisega \"%s\" lugejasse ja vajutage <OK>.\n"
-"Kui teil säherdust ei ole, vajutage <Katkesta>"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Ikkagi edasi?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Pakettide tellimisel tekkis viga:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Pakettide installimisel tekkis viga:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Hoiatus\n"
-"\n"
-"Palun lugege hoolega alltoodud teksti. Kui Te ei ole kõigi alljärgnevate\n"
-"väidetega, on installimine järgmise CD pealt keelatud. Vajutage 'Keeldun', \n"
-"et jätkata installimist ilma selle CD-ta.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tekkis mingi viga"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Kas soovite võrguühendust taaskäivitada?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lõppkasutaja litsentsileping"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Järgnev lõppkasutaja litsents on eksimuste vältimiseks originaalkeeles\n"
-"\n"
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatuur"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Võimalike klaviatuuride täielik nimekiri"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Millist installi klassi Te soovite"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installimine/Uuendus"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "On see installimine või taastamine?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Soovituslik"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uuendus"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Palun valige hiire tüüp"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Hiire port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Millisesse seerialporti on Teie hiir ühendatud?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Nuppude teesklemine"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Teeskle 2 hiirenupp"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Teeskle 3 hiirenuppu"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kaartide seadmine..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE seadistamine"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ei leia partitsioone"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Otsin partitsioonidelt ühenduspunkte"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Valige ühenduspunktid"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
-"Proovin loetamatud kirjed puhastada kuid ANDMED NENDEL HÄVIVAD.\n"
-"Teine võimalus on keelata DrakX-il partitsioonitabeli muutmine.\n"
-"(Viga oli selline: %s)\n"
-"Kas olete nõus partitsioonide kaotamisega?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ei saanud partitsioonitabeli lugemisega hakkama.\n"
-"Jätkate omal vastutusel!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Juurpartitsiooni ei leitud"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Juurpartitsioon"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Millisel partitsioonil hoiate juurkataloogi (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Partitsioonitabeli säilitamiseks vajate alglaadimist"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Valige partitsioonid, mida soovite vormindada"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Blokkide kontroll?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Vormindan partitsioone"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Loon ja vormindan faili %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Saaleala on installimiseks liiga väike, palun lisage"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Otsin kättesaadavaid pakette"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Otsin uuendatavaid pakette"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Teie kõvakettal ei ole piisavalt vaba ruumi (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Täielik (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaalne (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Soovitatav (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Taasta flopilt"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Taasta flopilt"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Paketigruppide valik"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Salvesta flopile"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Valige pakett installimiseks"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Oodake"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Kui Teil on olemas kõik alltoodud CD-d, klikkige <OK>.\n"
-"Kui Teil ei ole ühtki neist, klikkige <Katkesta>.\n"
-"Kui puuduvad mõned CD-d, märkige vaid olemasolevad ja siis <OK>."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD pealdisega \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Valmistun installimiseks"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Paketi %s installimine\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Paigaldusjärgsed sätted"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Pange palun tühi flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nüüd on Teil võimalik oma süsteemi laadida krüptotarkvara.\n"
-"\n"
-"HOIATUS:\n"
-"\n"
-"Lähtuvalt erinevatest sellisele tarkvarale kohaldavatest nõuetest ja \n"
-"mõjutatuna eri jurisdiktsioonide normidest peavad kliendid ja/või \n"
-"lõppkasutajad olema kindlad, et nende asukohamaa jurisdiktsiooni "
-"õiguslikud \n"
-"aktid lubavad neil alla laadida, säilitada ja/või kasutada \n"
-"krüptograafiliste algoritmide realisatsioone sisaldavat tarkvara.\n"
-"\n"
-"Lisaks sellele peavad kliendid ja/või lõppkasutajad jälgima asukohamaa \n"
-"juriidiliste normide täitmist. Kui klient ja/või lõppkasutaja rikub "
-"kehtivaid \n"
-"õigusnorme, kohaldatakse karistus vastavalt asukohamaa seadustele.\n"
-"\n"
-"Mitte mingil juhul ei kanna Mandrakesoft S.A. ega tarkvara tarnija \n"
-"vastutust ei otseselt ega kaudselt tekkinud kahjude eest (kaasa arvatud, \n"
-"kuid mitte ainult, saamatajäänud tulu, äritegevuse katkestamine, äriinfo \n"
-"kaotsimine ja muud rahalised kaotused ning võimalikud kohtu poolt välja \n"
-"mõistetud hüvitused), mis tulenevad tarkvara, mis on kasutatav pärast \n"
-"käesoleva lepingu tingimustega nõustumist, alla laadimisest, hoidmisest \n"
-"või kasutamisest.\n"
-"\n"
-"Kõigi lepinguga seotud küsimuste asjus pöörduge palun aadressil: \n"
-"Mandrakesoft, Inc. \n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Proovin lugeda peeglilt pakettide nimekirja"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valige peegel, millelt lugeda pakettide nimekiri"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Proovin lugeda peeglilt pakettide nimekirja"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Millises ajavöötmes asute?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Kas Teie arvuti sisekell on seatud GMT ajale?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Printerit ei ole"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "On Teil veel kaarte?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Kokkuvõte"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Hiir"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Ajavööde"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kaart"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Helikaart"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kaart"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Kasuta NIS-i"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Kohalik printer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Juurkasutaja salasõna"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Salasõna puudub"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Salasõna on liiga lihtne (peaks olema vähemalt %d tähemärki)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentimisviis"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentimisviis"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS autentimine"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domeen"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Isetehtud alglaadimisketas annab Teile võimaluse laadida Linux flopilt\n"
-"sõltumata tavaliselt alglaadijast. See võib abiks olla, kui Te ei soovi\n"
-"SILO-t kõvakettale kirjutada või mõni muu operatsioonisüsteem SILO\n"
-"ära kustutab või ei õnnestu SILO-t Teie riistvara peal kasutada.\n"
-"Alglaadmisflopi on kasutatav ka hädaabikettana, kui kõvakettal oleva\n"
-"failisüsteemiga peaks mingi õnnetus juhtuma. Hoidke end ja Teid hoiab\n"
-"ka Jumal!\n"
-"\n"
-"Alglaadimisketta loomiseks asetage flopi esimesse seadmesse ning vajutage\n"
-"\"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Esimene flopiseade"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Teine flopiseade"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Jäta vahele"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Isetehtud alglaadimisketas annab Teile võimaluse laadida Linux flopilt\n"
-"sõltumata tavaliselt alglaadijast. See võib abiks olla, kui Te ei soovi\n"
-"LILO-t (grubi) kõvakettale kirjutada või mõni muu operatsioonisüsteem LILO\n"
-"ära kustutab või ei õnnestu LILO-t Teie riistvara peal kasutada.\n"
-"Alglaadmisflopi on kasutatav ka hädaabikettana, kui kõvakettal oleva\n"
-"failisüsteemiga peaks mingi õnnetus juhtuma. Hoidke end ja Teid hoiab\n"
-"ka Jumal!\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Flopiseade ei ole kättesaadav"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Vali flopiseade, mida kasutad alglaadimisketta tegemiseks"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Loome alglaadimisketta"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Soovite aboot-i kasutada?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Viga aboot-i installimisel, \n"
-"kas forseerida, riskides esimese partitsiooni hävinguga?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Alglaaduri installimine ebaõnnestus. Tekkis järgnev viga:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You will need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  Hold down Command-Option-O-F\n"
-" at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Pange palun tühi flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Loon kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Mõned sammud ei ole lõpule viidud\n"
-"\n"
-"Olete kindel, et väljute programmist?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Õnnitlen, installimine on edukalt lõpetatud.\n"
-"Võtke palun välja flopi ja/või CD ja vajutage Enter alglaadimiseks.\n"
-"\n"
-"\n"
-"Informatsiooni selle distributsiooni paranduste kohta (Errata) saab\n"
-"Mandrake Linux koduleheküljelt \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Abi süsteemi edasiseks konfigureerimiseks saab eelkõige dokumendist\n"
-"\"Official Mandrake Linux User's Guide\""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Loo kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automaatne install võib olla ka sedavõrd tegija,\n"
-"et kasutab ära kogu kõvaketta !!\n"
-"\n"
-"Võite valida ka lihtsalt installi kordamise.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaatne"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Korda"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installimine %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr " <Tab>/<Alt-Tab> väljade vahel  | <Space> valib | <F12> järgmine samm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu puudub"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Valige tegevus"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Edasijõudnud"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Palun oodake"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ava puu"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sule puu"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Sorteeritud või sorteerimata"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Halb valik, proovige palun uuesti\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Eelistused: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Soovite aboot-i kasutada?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "T¨ehhi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Saksa"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "DVORAK"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Hispaania"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Soome"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Prantsuse"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norra"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Vene"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Rootsi"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Briti"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraani"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeenia (vanem)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (trükimasin)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneetiline)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbaidþaani (ladina)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armeenia (foneetiline)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaaria"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiilia (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Valgevene"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Ðveitsi (Saksa asetus)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Ðveitsi (Prantsuse asetus)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tðehhi (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Saksa (ilma sammuta)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Taani"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "DVORAK (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "DVORAK (Norra)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "DVORAK (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eesti"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruusia (vene)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruusia (ladina)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Kreeka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungari"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroaadi"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Iisraeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Iisraeli foneetiline"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraani"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandi"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itaalia"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Jaapani 106 klahviga"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Ladina-Ameerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Leedu AZERTY (vanem)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Leedu AZERTY (uuem)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Leedu numbrireaga QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Leedu foneetiline QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Asukoht"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedoonia"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandi"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poola (QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poola (QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugali"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloveenia"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaki (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Aserbaidþaani (kirillitsa)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabel"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türgi (\"F\" mudel)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türgi (\"Q\" mudel)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US (rahvusvaheline)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnami numbrireaga QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavia (koos kirillitsaga)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ringühendus %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Eemalda enne kettarühmad (logical volumes)\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Suni hiir"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Lihtsalt PS2 rattaga hiir"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 nupp"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Lihtsalt 2-nupuline hiir"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Tavaline"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ratas"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seerial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Lihtsalt 3-nupuline hiir"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC seeria (seerial)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech (seerial, vana C7 tüüpi)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "siinihiir"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 nuppu"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 nuppu"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ei soovi"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Hiirt ei ole"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Palun testige hiirt"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Hiire aktiveerimiseks"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "KEERUTAGE RATTAKEST!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Lõpeta"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Järgmine ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Eelmine"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Kas see on sobiv?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Loo internetiühendus"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Kõige tavalisem ühendusviis ADSL jaoks on pppoe.\n"
-"Mõnel juhul aga kasutatakse pptp-d, harva dhcp-d.\n"
-"Kui Te ei tea, kasutage pppoe-d"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Mis DHCP klienti soovite kasutada?\n"
-"Vaikimisi on dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ühtki võrgukaarti ei õnnestunud tuvastada\n"
-"Seega ei saa ka sellist ühendust seadistada."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Valige võrguliides"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Palun valige, millist võrguliidest soovite internetiühenduse jaoks kasutada"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "võrgukaarti ei leitud"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Võrguseadistused"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Seda nõuavad ka mõned DHCP serverid.\n"
-"Masina nimi peab olema esitatud täiskujul,\n"
-"nagu ``minumasin.minufirma.ee''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Masinanimi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Võrgu sätete abimees"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Väline ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Sisemine ISDN kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Millist ISDN ühendust kasutate?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Leitud tulemüüri sätted!"
-
-#
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Leitud tulemüüri sätted!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN sätted"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vali oma teenusepakkuja.\n"
-" Kui see ei ole nimekirjas, vali Tundmatu"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Laadimisprotokoll"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Euroopa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Ülejäänud maailm"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ülejäänud maailm \n"
-" ilma D-kanalita"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Mis protokolli soovite kasutada?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Mis tüüpi kaart Teil on?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ei tea"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Kui Teil on ISA kaart, siis peaks järgmised väärtused olema õiged.\n"
-"\n"
-"Kui Teil on PCMCIA kaart, peaksite Te ise teadma selle IRQ ning IO "
-"väärtusi.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Katkesta"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Jätka"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Milline on Teie ISDN kaart?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Leidsin küll PCI ISDN kaardi, kui selle tüüp on tundmatu. Palun valige üks "
-"PCI kaart järgmisel sammul."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "PCI ISDN kaarti ei leitud. Palun valige üks järgmisel sammul."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Millisesse seerialporti on Teie modem ühendatud?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "DialUp parameetrid"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ühenduse nimi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Sissehelistamiskeskuse number"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Kasutajakonto"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skriptipõhine"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalipõhine"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeeninimi"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Esimene nimeserver (soovituslik)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Teine nimeserver (soovituslik)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada või uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Saate seadistada ühenduse uuesti."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Hetkel olete Internetiga ühendatud."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Saate ühenduda Internetti või seadistada ühendus uuesti."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Hetkel ei ole Te Internetti ühendatud."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Ühendatud"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Lahuta..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Seadista TV-kaabli ühendus"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada või uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada või uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Võrgu sätted"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Võrguühendus on juba seadistatud, sest installitakse ju võrgust.\n"
-"Kui soovite neid seadistusi säilitada, valige OK, muidu katkestage ja saate "
-"seadistada uuesti.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Internetiühenduse Abimees\n"
-"\n"
-"Nüüd hakkame internetiühendust seadistama.\n"
-"Kui Te ei soovi automaatset tuvastamist siis jätke see märkimata.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Valige profiil, mida seadistada"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Kasuta automaattuvastust"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Otsin printerit..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Tavaline modemiühendus"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "leiti port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ühendus"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "tuvastati %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN ühendus"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "leiti liidesel %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kaabliühendus"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kaabliühendus"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN ühendus"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "võrgukaart(i) leiti üles"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Valige kasutatav vahend"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Kas soovite luua ühenduse juba alglaadimisel?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Võrgusätted"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Kas soovite võrguühendust taaskäivitada?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Õnnitleme, võrgundus ja internetiühendus on seadistatud.\n"
-"\n"
-"Sätted salvestatakse nüüd.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Soovitame taaskäivitada ka X keskkonna, et vältida võimalikke\n"
-"masinanime muutmisest tingitud probleeme."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"HOIATUS: See seade on juba seadistatud Interneti jaoks.\n"
-"Valige lihtsalt OK, et sätteid mitte muuta."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Palun andke IP parameetrid selle masina jaoks.\n"
-"Kõik read tuleb sisestada IP-aadressi kujul\n"
-"(Näiteks 12.34.56.78)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Seadistame võrgukaardi %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (juhtprogramm %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-aadress"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Võrgu mask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automaatne IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-aadress peab olema formaadis 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Masina nimi peab olema esitatud täiskujul,\n"
-"nagu ``minumasin.minufirma.ee''.\n"
-"Kui Teil on vaikimisi lüüs, siis sisestage ka selle IP-aadress"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Nimeserver"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Lüüsipoolne seade"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Vahendajate sätted"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP vahendaja"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP vahendaja"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Vahendaja peab olema kujul http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Vahendaja peab olema kujul ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneti sätted"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Kas soovite oma internetiühendust proovida?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testime Teie ühendust..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Süsteem on nüüd Internetti ühendatud"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Turvakaalutlusel katkestan nüüd ühenduse."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Paistab, et süsteem ei ole Internetti ühendatud.\n"
-"Palun seadistage ühendus uuesti."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Internetiühenduse sätted"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Palun täida allpool olev väli"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kaardi IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kaardi mälu (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kaardi IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kaardi IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kaardi IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Teie telefoninumber"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Teenusepakkuja tunnus (näiteks minuisp.ee)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Sissehelistamiskeskuse number"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 (võib jätta tühjaks)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 (võib jätta tühjaks)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Klaviatuuri valik"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Valimisviis"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Ühenduse tüüp: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Ühenduse tüüp: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kasutajatunnus"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Salasõna"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ühendamine ebaõnnestus: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Sellel platformil ei saa laiendatud partitsiooni luua"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Partitsioonitabelis on miskipärast tühi koht, aga see ei ole kasutatav.\n"
-"Ainuke lahendus on nihutada primaarset partitsiooni, et auk satuks "
-"laiendatud partitsioonide kõrvale"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Taastamine failist %s ebaõnnestus: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Viga faili %s kirjutamisel"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Teie kõvakettal juhtub imelikke asju. \n"
-"Andmete pidevuse kontroll ebaõnnestus. \n"
-"See tähendab, et kettale kirjutamisel tekivad jamad"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "vajalik"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tähtis"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "väga kena"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "kena"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "võib olla"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Kohalik printer"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Võrguprinter"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "lpd printserver"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Võrguprinter (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printserver:"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printeri seadme URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Kohalik printer"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Võrguprinter"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Viga faili %s kirjutamisel"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(moodul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS serveri IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Vaikimisi)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Vali printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kuidas on see printer ühendatud?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Kui võrgus on CUPS server, siis ei ole Teil vaja siin\n"
-"printereid seadistada, need leitakse automaatselt.\n"
-"Kui kahtlete, valige \"CUPS printserver\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN sätted"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-aadress peab olema formaadis 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Pordi number peab olema ikkagi number"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS serveri IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Otsin printerit..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Proovin porte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Kasuta automaattuvastust"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "tuvastati %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Millisesse seerialporti on Teie modem ühendatud?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Seadistused"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Võrguprinteri sätted"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Et kasutada teise masina lpd printerit, peate sisestama\n"
-"printserveri nime ja prindijärjekorra nime, mida soovite\n"
-"serveril kasutada."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printeri sätted"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Et printida SMB printerile, peate andma vastava server SMB nimi\n"
-"(NB! See ei pruugi kokku langeda TCP/IP nimega!) ja võibolla ka\n"
-"printserveri IP-aadressi, samuti ka serveri poolt jagatava printeri\n"
-"nime ning serveri poolt aktsepteeritud kasutajatunnuse, salasõna ja töögrupi"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB serveri nimi"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB serveri IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Jagatav printer"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Töögrupp"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare printeri sätted"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Et kasutada NetWare printerit, peate sisestama NetWare printserveri\n"
-"nime (NB! See võib olla erinev tema TCP/IP nimest!) samuti nagu ka\n"
-"prindijärjekorra nime serveril ning kasutajatunnuse ja salasõna"
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printserver:"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Prindijärjekorra nimi:"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Pistikprinteri sätted"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Sisestage palun printeri masinanimi ja võimaluse\n"
-"korral pordi number"
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Kirjeldus"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Asukoht"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Kas see on sobiv?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Mis tüüpi printer see on?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Proovin porte"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Jah, trüki mõlemad testleheküljed"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printer"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardtööriistad"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testlehekülg on saadetus trükideemonile.\n"
-"Nüüd võib minna natuke aega.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
-"Kas tulemust on juba näha?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testlehekülg on saadetud trükideemonile.\n"
-"Nüüd võib minna natuke aega.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
-"Kas tulemust on juba näha?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Hiir"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Seiskame võrguliidesed"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Seiskame võrguliidesed"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Otse ühendatud printeri sätted"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Printeri nimi tohib sisaldada vaid tähti, numbreid ja alakriipsu"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Sea printer"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Testime Teie ühendust..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Võrgusätted"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Võrguseadistused"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Kõrge"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoiline"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Vali printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Printeri sätted"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Otse ühendatud printeri sätted"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Printeri sätted"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Kas soovite printerit seadistada?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Kirjeldatud on järgnevad prindijärjekorrad.\n"
-"Te võite neid lisada ning olemasolevaid muuta."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Kirjeldatud on järgnevad prindijärjekorrad.\n"
-"Te võite neid lisada ning olemasolevaid muuta."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Võrgusätted"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Tavakasutus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Võrguprinter"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Kas soovite võrguühendust taaskäivitada?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Vahendajate sätted"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Vahendaja peab olema kujul http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Pordi number peab olema ikkagi number"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Vahendaja peab olema kujul ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Vaikimisi sisenemine"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Salasõna"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Salasõna puudub"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Salasõnad ei klapi"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Juba vormindatud RAID-ile (md%d) ei saa partitsiooni lisada"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ei saa kirjutada faili %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ebaõnnestus"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ebaõnnestus (puudub 'raidtools'?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei ole piisavalt partitsiooni RAID-%d jaoks\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron käivitab programme perioodiliselt analoogiliselt cron-ile.\n"
-"Kasutage seda juhul kui Teie arvuti ei tööta 24h."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd on kasutusel põhiliselt sülearvutites, akude täituvuse jälgimiseks.\n"
-"Samuti suudab see aku tühjenemisel süsteemi viisakalt maha võtta."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Laseb käivitada ühekordseid käske etteantud ajal või ootab süsteemi\n"
-"koormuse laskumist käsu käivitamiseks piisavale tasemele."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIXi süsteemide standardvahend kasutaja programmide perioodiliseks\n"
-"käivitamiseks. Vixie cron sisaldab lisaks veel turvalisust ja kasutus-\n"
-"mugavust tõstvaid omadusi. Soovitav süsteemile mis töötab 24h"
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM annab võimaluse kasutada hiirt ka tekstikonsoolil. Lisaks tavalisele\n"
-"lõikamisele/kleepimisele saab kasutada ka menüüsüsteeme."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache on maailma juhtiv veebiserveri programm. Tõenäoliselt\n"
-"ka võimsaim."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneti \"superserver\", nimega inetd laseb käivitada mitmeid võrgu-\n"
-"teenustel, nagu telnet, ftp, rsh, rlogin jne."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"See programm laeb süsteemi käivitumisel klaviatuuripaigutuse vastavalt\n"
-"failis /etc/sysconfig/keyboard kirjeldatule."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr "lpd on trükideemon, ilma selleta ei ole võimalik printida."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) on kasutusel nimeserverites, mis teenindavad DNS\n"
-"hierarhiat, tõlkimaks nimesid IP-aadressideks"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ühendab ja lahutab kõiki võrgufailisüsteeme (nii NFS, SMB\n"
-"kui ka NCP)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr "Aktiveerib süsteemi laadimisel Teile vajalikud võrguliidesed."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm täidab\n"
-"NFS serveri funktsioone, ja konfigureeritakse failis /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm täidab\n"
-"NFS failide lukustamise funktsioone. Vajalik serveerimisel."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA tugi on tavaliselt vajalik sülearvutitele võrgu- ja modemiliideste\n"
-"lisamiseks."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper haldab RPC ühendusi, mida kasutavad NFS ja NIS. Neil \n"
-"serveritel on see hädavajalik."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix on meili transpordiagent, see tähendab programm, mis\n"
-"toimetab meili ühest masinast teise."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salvestab ja taastab juhuarvude genereerimiseks vajaliku süsteemse\n"
-"entroopiasalve."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed on RIP deemon, mis vahetab selle protokolli alusel marsruutimis-\n"
-"infot. Kui Teil on RIP kasutusel, on vajalik ka routed."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokoll laseb üle võrgu saada informatsiooni süsteemi\n"
-"töö kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokoll laseb üle võrgu saada informatsiooni süsteemi\n"
-"kasutajate kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokoll laseb üle võrgu saada informatsiooni süsteemi\n"
-"kasutajate kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Käivita X-Windows alglaadimisel"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr "syslog-i kaudu toimub süsteemis toimiva logimine. Vajalik!"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Stardib X fondiserveri, selleta X ei käivitu."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valige, millised teenused tuleks alglaadimisel käivitada"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printer"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Töömood"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Võrguprinteri sätted"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Server, Andmebaasid"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "seade"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "käimas"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "peatatud"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Teenused ja deemonid"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Selle teenuse kohta ei oska\n"
-"lisainformatsiooni anda."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Alglaadimisel"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Olek:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Ülejäänud maailm"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internetiühendus"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimeedia - Graafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Arendus"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Juhtimiskeskus"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Võrguliides"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB serveri nimi"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Mängud"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "ekspert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "kohustuslik"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Paketi %s installimine"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
-"Proovin loetamatud kirjed puhastada"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Viga"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Paigaldusjärgsed sätted"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Õnnitleme!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Installimine"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Tavakasutaja"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Paketigruppide valik"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Eemalda prindijärjekord"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Eemalda Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Palun proovige veel"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Palun proovige veel"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Salasõna puudub"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN ühendus"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Vali printeri ühendusviis"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Palun valige partitsioon"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Võrgu mask:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Kas optimiseerime kõvaketast?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Kas optimiseerime kõvaketast?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Oodake"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ratas"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ratas"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Mooduli parameetrid:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Võrgu sätted"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "Võrgu mask:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Failisüsteemid"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Eelistused"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Millisesse seerialporti on Teie modem ühendatud?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Võrgu sätted"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Palun valige hiire tüüp"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Taasta flopilt"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Palun valige hiire tüüp"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Muu"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Süsteemi installimine"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Isetehtud"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Abi"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Eelmine"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Olek:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Tekst"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Pakettide valik"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Kõlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Salvesta faili"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Võrgu sätted"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Võrgu sätted"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "ISDN sätted"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Failisüsteemid"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installimine ebaõnnestus. Tekkis järgnev viga:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s ei leitud"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Tehtud"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Vorminda flopi"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Valmistun installimiseks"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "piiratud"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "piiratud"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Vormindamine"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "RPM-ide eemaldamine"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "ISDN sätted"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ühenduspunkt"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Valige partitsioonid, mida soovite vormindada"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Kontor"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Katkesta"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printer"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Süsteemi installimine"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Valige fail"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Võrguprinter"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Initsialiseerimisteade"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Teie süsteemis ei ole võrgukaarti!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Installimine"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Teie süsteemis ei ole võrgukaarti!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Välju programmist"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetiühenduse jagamine töötab"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud ja see on\n"
-"ka praegu aktiivne.\n"
-"\n"
-"Mida Te soovite teha?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "keela"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "tühista"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "seadista uuesti"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Peaten serverid..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetiühendust nüüd enam ei jagata"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetiühendust hetkel ei jagata"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud aga hetkel\n"
-"on see keelatud.\n"
-"\n"
-"Mida Te soovite teha?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "luba"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Käivitan serverid..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetiühenduse jagamine nüüd töötab"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nüüd on Teil võimalik seadistada oma arvutit internetiühendust jagama.\n"
-"\n"
-"Märkus: kohtvõrgu (LAN) jaoks on vajalik eraldi võrgukaardi olemasolu."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liides %s (kasutab moodulit %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Liides %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Teie süsteemis ei ole võrgukaarti!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ühtki võrgukaarti ei ole hetkel seadistatud. Palun kasutage selleks "
-"riistvara sätteseadjat."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Võrguliides"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Teil on vaid üks seadistatud võrguliides:\n"
-"\n"
-"%s\n"
-"\n"
-"Kohtvõrgu sätted seotakse selle liidesga."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Palun valige millist võrguliidest soovite kasutada kohtvõrgu\n"
-"jaoks."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Alglaaduri stiil"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Interneti sätted"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS serveri IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Võimalik kohtvõrgu aadressi konflikt %s konfiguratsioonis!\n"
-
-#
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Leitud tulemüüri sätted!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Hoiatus! Leiti olemasolevad tulemüüri sätted. Tõenäoliselt peaksite need "
-"hiljem üle vaatame."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Seadistan..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Häälestan skriptid, installin tarkvara, käivitan serverid..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleemid paketi %s installimisel"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kõik on seadistatud.\n"
-"Nüüd saate internetiühendust jagada teistele kohtvõrgu arvutitele, kasutades "
-"neil automaatset konfigureerimist (DHCP)"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Internetiühenduse jagamine on juba seadistatud aga hetkel keelatud."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud ja see on praegu aktiivne."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetiühenduse jagamist ei ole kunagi seadistatud"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Interneti jagamise seadistamine"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Internetiühenduse jagamise Abimees!\n"
-"\n"
-"%s\n"
-"\n"
-"Valige Abimehe käivitamiseks ``OK''"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Võrgusätted (%d liidest)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Kustuta profiil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profiil kustutamiseks:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Uus profiil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Masinanimi: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetiühendus"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tüüp: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Vaikelüüs:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Liides:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Olek:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Seadiste internetiühendus..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Juhtprogramm"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Liides"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Olek:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Seadista kohtvõrk (LAN) ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Abimees..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Rakenda"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Palun oodake... Rakendan seadistusi"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Ühendatud"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ei ole ühendatud"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Ühenda..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Lahuta..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Võrgukaart %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Laadimisprotokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Käivitub laadimisel"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiivne"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktiivne"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Ühenduse tüüp: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameetrid"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Vaikelüüs"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Võrgukaart"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Turvataseme seadmine"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Juhtimiskeskus"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Valige kasutatav vahend"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanada (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Euroopa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandi"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Euroopa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seerial"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "kasutamiseks: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Kas soovite konsoolil kasutada BackSpace-i kui Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vaheta CD plaat"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Palun sisestage installeerimise CD pealdisega lugejasse ja vajutage <OK>.\n"
-"Kui teil säherdust ei ole, vajutage <Katkesta>, et kiiruendust vältida."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ei saa kiiruuendust alustada !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "DrakNet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fail/_Uus"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fail/_Ava"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fail/_Salvesta"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fail/Salvesta _Kui"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fail/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Eelistused"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Eelistused/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Abi"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Abi/_Misvärk"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Initsialiseerimisteade"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Masin:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Masin:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache ja Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "varjutatud"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "huvitav"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "vormindatakse"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Seadistused"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Salvesta kui..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Palun valige hiire tüüp"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ei leitud: serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Teeskleme keskmist hiirenuppu?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Valige graafikakaart"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Alglaadimisseade"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Tulemüüri sätted"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Tulemüüri sätted"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Tulemüür\n"
-"\n"
-"Tulemüüri olete juba seadistanud.\n"
-"Valige 'Seadista', et midagi muuta"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Tulemüür\n"
-"\n"
-"Valige 'Seadista', selle seadistamiseks nüüd"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Valige sobiv keel"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Valige paigaldusmeetod"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kõvaketta leidmine"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Hiire seadmine"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klaviatuuri valik"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Turvalisus"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Failisüsteemid"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Vormindamine"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pakettide valik"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Süsteemi installimine"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tavakasutaja"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Võrgusätted"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Teenuste sätted"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Loo alglaadimisflopi"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Seadista X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Süsteemi installimine"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Välju programmist"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall seadistamine\n"
-"\n"
-"Selle vahendiga saate luua lihtsa kaitse Interneti ohtude vastu.\n"
-"Kui vajate võimsat tulemüüri, vaadake palun\n"
-"spetsiaalset MandrakeSecurity Firewall distributsiooni."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nüüd küsitakse Teilt millistele teenustele soovite lubada ligipääsu\n"
-"Internetist. Palun mõelge hoolega, nende vastuste üle, sest tegu on\n"
-"ju Teie arvuti turvalisusega.\n"
-"\n"
-"Palun, kui te ei soovi hetkel mõnd neist kasutada, pange see igaks\n"
-"juhuks tulemüüri taha. Hiljem on Teil soovi korral vaba voli kõike\n"
-"uuesti lubada."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kas sellel arvutil hakkab tööle veebiserver, mida külastatakse kogu\n"
-"Internetist? Kui vajate ligipääsu vaid samast arvutist, vastake\n"
-"siin EI.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kas sellel arvutil hakkab tööle nimeserver? Kui Te seda ei soovi\n"
-"siis vastake palun ei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Kas soovite sisenevaid SSH ühendusi? SSH on turvaline asendus telnetile.\n"
-"Telneti kaudu üle võrgu masinasse sisenemine on äärmisel ebaturvaline\n"
-"kuna sel teel on lihtsate vahenditega võimalik võrgus paroole varastada.\n"
-"SSH korral on ühendus krüptitud ja pealtkuulamine praktiliselt välistatud."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Kas soovite lubada sisenevaid telneti ühendusi?\n"
-"See on tõeliselt ebaturvaline, vastake siin palun Ei ja kasutage\n"
-"telneti asemel SSH-d.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kas soovite sellel arvuti käivitada avaliku FTP serveri? Kui see on\n"
-"tõesti Teie soov, siis lubage palun ainult anonüümne ligipääs, sest\n"
-"muul juhul tekib jälle paroolide varastamise oht, sest FTP ei tunne\n"
-"krüptimist.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kas Teil on jooksmas avalik meiliserver? Vastasel juhul on\n"
-"palju turvalisem siia tulemü ette panna.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kas vajate sellel masinal POP või IMAP serverit?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Teil on kasutusel 2.2 kernel. Kui IP aadress antakse Teie arvutile\n"
-"dünaamiliselt, siis peaks seda siinkohal lubama.\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Kas see arvuti kuulub võrku, millest masinad sünkroniseerivad\n"
-"omavahel kellaaega? Tõenäoliselt võite selle rahulikult keelata."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Seadistused tehtud. Kas salvestada sätted kettale?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Võrgukaart %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Seadme %s avamine kirjutamiseks ebaõnnestus: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Võrgu sätete abimees"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Palun oodake, valmistun installimiseks"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Veeb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Võrguarvuti (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, SSH server, vahendaja (proxy)"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Suhtlus Palmi või Visoriga"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Tulemüür/marsruuter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontoriprogrammid: tekstitöötlus (kword, abiword), tabelarvutus (kspread, "
-"gnumeric), PDF eelvaade jne"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-värgid: mp3 ja midi, mikserid jms"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Raamatud ja Howto-d Linux ja vabavara kohta"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm jt"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimeedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Meili, uudiste, veebi, jututamise ja failiülekande programmid"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Andmebaasid"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Vahendid lihtsamaks süsteemi administreerimiseks"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimeedia - Heli"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utiliidid"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentatsioon"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsooliprogrammid"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneti tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimeedia tööjaam"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN sätted"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Veel graafilisi töölaudu (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, graafiline töökeskkond ja rida seonduvaid rakendusi"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafiline keskkond"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache ja Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Vahendid CD-de kirjutamiseks"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontori tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm jne"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Graafikaprogrammid nagu Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ja C++ arendusteegid, programmid ja päisefailid"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Failiserver"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Meil/grupitöö/uudised"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Mänguvahend"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video esitamine ja redigeerimine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimeedia - Graafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Meelelahutus: arcade, boards, strategy jne"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "Komplekt programme meili ja uudiste lugemiseks ning veebi brausimiseks"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiveerimine, emuleerimine, monitoorimine"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Isiklikud finantsid"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Graafiline töökeskkond koos kasutajasõbralike rakendustega"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Mitmete protokollide, sealhulgas ssh kliendid"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Internetiühendus"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Heli ja video esitamine ja redigeerimine"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Muud graafilised töölauad"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorid, shellid, terminalid, failihaldus"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Isiklike finantside haldusvahendid"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Isikliku info haldamine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimeedia - CD kirjutamine"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Teadustööjaam"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Katkesta"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ei soovi"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Valige uus vaikimisi kasutaja :"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Võrguprinter"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Nüüd võite moodulile %s parameetreid määrata"
-
-#~ msgid "mount failed"
-#~ msgstr "ühendamine ebaõnnestus"
-
-#~ msgid "Low"
-#~ msgstr "Madal"
-
-#~ msgid "Medium"
-#~ msgstr "Keskmine"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr "Turvataset on parandatud, lisatud on hoiatusi ja piiranguid."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimeedia"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ekspert"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linuxil on kombeks hoida sisemist kella Greenwichi (GMT) ajas ja muuta\n"
-#~ "vajadusel süsteemi kella vastavalt Teie valitud ajavööndile."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Loo internetiühendus"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Katkesta internetiühendus"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Seadista võrguühendus (kohtvõrk või Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Millisele kettale soovite seda ümber paigutada?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Palun valige paketid installimiseks"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome tööjaam"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Kasutaja:"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Palun valige hiire tüüp"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Välju"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "CD/flopi/.. autoühendamine"
-
-#~ msgid "Active"
-#~ msgstr "Aktiivne"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ei"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Leiti printer, nimega \"%s\" "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Otse ühendatud printer"
-
-#~ msgid "Printer Device"
-#~ msgstr "Printeri seade"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "CUPS printserver"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "CUPS printserver"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Töömood"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Muu"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Palun valige klaviatuuriasetus"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Palun valige partitsioon"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tüüp: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Kõlbmatu tagavarakoopia"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Seadista X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Printeri seade"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Katkesta"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "OK"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Hiir"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "tuut"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Testime Teie ühendust..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Sulgeme nüüd ühenduse..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Võrguühendus ei ole suletud.\n"
-#~ "Proovige seda teha käsitsi, käivitades\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "juurkasutajana."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Süsteem on nüüd Internetist lahutatud."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Valige paigalduse maht"
-
-#~ msgid "Total size: "
-#~ msgstr "Suurus kokku: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Palun oodake, "
-
-#~ msgid "Total time "
-#~ msgstr "Aega kokku "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Kasutada olemasolevat X-i seadistust?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Mis porti on Teie printer ühendatud? \n"
-#~ "(paneme tähele, et /dev/lp0 on sama mis LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Hoiatan, võrguliides on juba seadistatud. Järgnevalt seadistame selle "
-#~ "uuesti."
-
-#~ msgid "New"
-#~ msgstr "Uus"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Eemalda"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Palun valige partitsioon"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Mitmeselt mõistetav (%s), palun täpsustage\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (vaikimisi %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Teie valik? (vaikimisi %s, `none' - ei midagi)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ei saa lugeda faili /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Kas soovite võrguühendust taaskäivitada?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Kas olete nõus?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Nüüd taaskäivitan võrguliidese:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Kas olete valmis võrguliidese %s taaskäivitamiseks?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tavaline valik on \"/dev/hda\" (esimese IDE kanali master), kui Te ei\n"
-#~ "tea täpselt, et tahate teisiti teha."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Ühenduse tüüp: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Valige uus vaikimisi kasutaja :"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Palun testige hiirt"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Valige keel süsteemi installimiseks ja kasutamiseks."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Et installimist jätkata, peate nõustuma ülaltoodud "
-#~ "litsentsitingimustega.\n"
-#~ "\n"
-#~ "\n"
-#~ "Palun valige \"Nõus\", kui nõustute nendega.\n"
-#~ "\n"
-#~ "\n"
-#~ "Palun valige \"Keeldun\", kui ei pea neile tingimistele allumist "
-#~ "võimalikuks. Installimine lõpetatakse, tegemata Teie süsteemis muutusi."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Valige klaviatuuripaigutus ülaltoodud nimekirjast"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Kui soovite, et peale installimist oleks võimalik kasutada veel "
-#~ "erinevaid\n"
-#~ "keeli, valige need ülaltoodud nimekirjast. Valik \"Kõik\" lisab toe\n"
-#~ "kõigile keeltele."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ "   Teie vajadustele. Järgmisena saate teha valikud sõltuvalt Teie "
-#~ "arvuti \n"
-#~ "   edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "   süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-#~ "   Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA TEETE!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Nüüd määrake oma arvuti peamne kasutusala. Valikud on:\n"
-#~ "\n"
-#~ "* Tööjaam: valige, kui kavatsete oma arvutit rakendada igapäevategemiste "
-#~ "tarvis (kontorirakendused,\n"
-#~ "  graafika ja muu selline).\n"
-#~ "\n"
-#~ "\n"
-#~ "* Arendus: installitakse täiskomplekt vahendeid eri programmeerimiskeelte "
-#~ "kasutamiseks, allikkoodi loomiseks,\n"
-#~ "  kompileerimiseks, silumiseks jne.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: valige see, kui vajate Mandrake Linux serverit. Saate "
-#~ "serveerida faile (NFS või SMB), printida\n"
-#~ "  (Unixi stiilis lp või Windowsi SMB), lisaks andmebaasid, "
-#~ "veebirakendused jms. Installimata\n"
-#~ "  jäetakse graafiline kasutajaliides (KDE, GNOME...)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Nüüd võite valida paketigruppe installimiseks või uuendamiseks\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX kontrollib, kas Teil on ikka piisavalt vaba ruumi nende kõigi "
-#~ "jaoks.\n"
-#~ "kui mitte, hoiatab ta Teid. Kui Te hoiatusest ei hooli jäetakse "
-#~ "automaatselt\n"
-#~ "kõrvale vähemolulised paketid.\n"
-#~ "Nimekirja lõpus saate valida \"Valik paketthaaval\"; sel juhul aga peate\n"
-#~ "läbi sirvima üle 1000 üksiku paketi..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Nüüd saate pakette ükshaaval installimiseks valida\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketipuud saate avada ja sulgeda vasakpoolses nurgas asuvatest nuppudest."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Kui Teil on olemas kõik ülaltoodud CD-d, klikkige <OK>.\n"
-#~ "Kui Teil ei ole ühtki neist, klikkige <Katkesta>.\n"
-#~ "Kui puuduvad mõned CD-d, jätke märgituks vaid olemasolevad ja siis <OK>."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Kui soovite oma arvuti ühendada Internetti või kohtvõrku, tehke palun\n"
-#~ "õige valik. Välise seadme korrektseks tuvastamiseks on vajalik, et see "
-#~ "oleks\n"
-#~ "sisse lülitatud ja arvutiga ühendatud\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Te ei soovi võrguühendust kasutada, valige \"Keela võrguühendus\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite võrguühenduse seadistada hiljem, valige \"Tehtud\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modemit ei leitud. Palun valige seerialport, kuhu see on ühendatud.\n"
-#~ "\n"
-#~ "\n"
-#~ "Igaks juhuks: esimese seerialpordi (\"COM1\" Microsoft Windowsis) nimi\n"
-#~ "on GNU/Linux süsteemis \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sisestage sissehelistamiskeskuse andmed. Kui Te neid ei tea\n"
-#~ "või kahtlete, saate oma teenusepakkujalt (ISP-l) kindlasti abi.\n"
-#~ "Näiteks info nimeserveri (DNS) kohta saab tavaliselt ühenduse\n"
-#~ "loomise ajal automaatselt"
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Kui Teil on väline modem, siis lülitage see palun nüüd sisse, et DrakX "
-#~ "saaks seda tuvastada."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Palun lülitage modem sisse ja valige nimekirjast õige."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Kui Te ei ole kindlad, et ülaltoodud informatsioon vastab tõele\n"
-#~ "või Te ei tea, mida sisestada, küsige abi oma internetiteenuse pakkujalt\n"
-#~ "(ISP-lt). Näiteks info nimeserveri (DNS) kohta saab tavaliselt ühenduse\n"
-#~ "loomise ajal automaatselt"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Nüüd sisestage oma arvuti nimi, kui see on vajalik. Kui kahtlete, siis "
-#~ "peaksite küsima lisainformatsiooni oma ISP käest."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Võrguliidese seadistamiseks on vajalik:\n"
-#~ "\n"
-#~ "   * IP-aadress: kui Te seda ei teha, küsige oma võrguhaldurilt või\n"
-#~ "internetiteenuse pakkujalt (ISP).\n"
-#~ "\n"
-#~ "   * Võrgumask: \"255.255.255.0\" on tavaliselt sobiv. Igaks juhuks "
-#~ "võite\n"
-#~ "võrguhalduri või ISP käest üle küsida.\n"
-#~ "\n"
-#~ "   * Automaatne IP: Kui Teie võrgus on kasutusel BOOTP või DHCP.\n"
-#~ "Selle valimisel ei pea välja \"IP-aadress\" täitma. Kui kahtlete\n"
-#~ "küsige jällegi oma võrguhaldurilt või ISP-lt."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Kui Teie võrgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
-#~ "korral\n"
-#~ "küsige võrguhaldurilt."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Kui vaja, sisestage oma süsteemi nimi. Kui Teil ei\n"
-#~ "ole ühtki head mõtet, jätke see rida tühjaks"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Nüüd sisestage oma sissehelistamisteenuse pakkuja andmed. Kui ei ole "
-#~ "kindel,\n"
-#~ "mida kuhu sisestada, küsige oma ISP käest üle."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Kui peate kasutama vahendajaid (tulemüüri vms), seadistage need nüüd. "
-#~ "Kui\n"
-#~ "kahtlete, on abiks võrguhaldur või ISP"
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Krüptopakette saate installida pärast Internetiühenduse seadistamist.\n"
-#~ "Esmalt valige peegel, kust soovite pakette alla laadida ja seejärel\n"
-#~ "valige paketid.\n"
-#~ "\n"
-#~ "\n"
-#~ "Märkus: krüptopakettide valimisel peate arvesse võtma ka võimalikke\n"
-#~ "õiguslikke piiranguid oma asukohamaal."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Nüüd saate valida ajavõõtme vastavalt oma asukohale."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Teil on võimalus seadistada kas kohalik (Teie arvutiga ühendatud) või\n"
-#~ "võrguprinter (Unix, Netware või Microsoft Windows võrgus)"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Kui soovite vahetevahel printida, valige palun selleks sobiv meetod, "
-#~ "CUPS\n"
-#~ "või LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS on uus, võimas ja paindlik printimissüsteem Unix keskkonnas (CUPS -\n"
-#~ "Common Unix Printing System). Mandrake Linux kasutab vaikimisi seda.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR on vanem meetod, mis oli kasutusel ka eelmistest Mandrake Linux\n"
-#~ "distributsioonides.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teil ei olegi printerit, valige \"Ei soovi\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux oskab toimetada mitut tüüpi printeritega. Igaüht neist "
-#~ "seadistatakse\n"
-#~ "erinevalt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teie printer on füüsiliselt arvutiga ühendatud, valige \"Kohalik "
-#~ "printer\"\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada võrguprinterit Unix serveril, valige \"Võrguprinter"
-#~ "\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada võrguprinteri Windows serveril (või muidu üle SMB\n"
-#~ "protokolli), valige  \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Palun lülitage oma printer sisse ja laske DrakX-il seda tuvastade.\n"
-#~ "\n"
-#~ "Samuti on vaja sisestada lisainformatsiooni:\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
-#~ "peab Teil olema vähemalt ühe printeri nimi \"lp\".\n"
-#~ "     Kui Teil ongi ainult üks printer, saate sellele anda ka mitu nime. "
-#~ "Nimed peavad olema eraldatud sümboliga \"|\"\n"
-#~ "     Seega, kui soovite, et nimel oleks ka mingi tähendus, kirjutage "
-#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
-#~ "     Printer, mille nimede hulgas on \"lp\", saab olema Teie süsteemi "
-#~ "jaoks vaikimisi printeriks.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Kirjeldus: see ei ole kohustuslik, kuid võib osutuda vajalikuks, kui "
-#~ "Teil on näiteks mitu kohalikku printerit ja soovite neid võrgus välja "
-#~ "jagada\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Asukoht: kui soovite anda täiendavat informatsiooni printeri "
-#~ "asukohast\n"
-#~ "    Näiteks: \"Teise korruse keskel\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Nüüd on vaja lisainformatsiooni.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
-#~ "peab Teil olema vähemalt ühe printeri nimi \"lp\".\n"
-#~ "     Kui Teil ongi ainult üks printer, saate sellele anda ka mitu nime. "
-#~ "Nimed peavad olema eraldatud sümboliga \"|\"\n"
-#~ "     Seega, kui soovite, et nimel oleks ka mingi tähendus, kirjutage "
-#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
-#~ "     Printer, mille nimede hulgas on \"lp\", saab olema Teie süsteemi "
-#~ "jaoks vaikimisi printeriks.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Spuulkataloog: kataloog, kus spuuler hoiab ajutisi faile enne "
-#~ "printimist. Seda ei ole soovitav muuta.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * Printeri ühendusviis: Kui Teie printer on füüsiliselt Teie arvuti "
-#~ "küljes, valige \"Kohalik printer\".\n"
-#~ "    Kui soovite kasutada printerit UNIX serveri küljes, valige \"lpd "
-#~ "printserver\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Kui soovite kasutada printerit Microsoft Windows võrgus (või SMB "
-#~ "serveril) valige \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Kui soovite kasutada NetWare serveril asuvat printerit, valige "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Teie printerit ei õnnestunud tuvastada. Palun abistavat infot võimaliku\n"
-#~ "ühenduspistiku kohta.\n"
-#~ "\n"
-#~ "\n"
-#~ "Enamasti on printer ühendatud esimesse paralleelporti. GNU/Linuxis on "
-#~ "selle\n"
-#~ "nimeks \"/dev/lp0\" ja Microsoft Windowsis \"LPT1\"."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Valige printer ülaltoodud nimekirjast."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Palun valige oma printerile sobivad sätted.\n"
-#~ "Abi saate ilmselt ka printeri dokumentatsioonist.\n"
-#~ "\n"
-#~ "\n"
-#~ "Järgmisel sammul saate oma seadistusi testida ja soovi korral muuta, kui "
-#~ "midagi ei tööta nagu vaja."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Nüüd peate sisestama süsteemi juurkasutaja (root) parooli. Et vähendada\n"
-#~ "eksimisvõimalust, tehke seda kaks korda.\n"
-#~ "\n"
-#~ "\n"
-#~ "Juurkasutaja on süsteemi tähtsaim kasutaja ja ainuke, kes tohib teha\n"
-#~ "muudatusi süsteemi sätetesse. Seepärast valige juurkasutaja parooli "
-#~ "erilise\n"
-#~ "hoolega.\n"
-#~ "\n"
-#~ "Hea salasõna peaks olema kombinatsioon tähtedest ja numbritest \n"
-#~ "ning vähemalt 8 märki pikk. Ärge *kunagi* kirjutage oma parooli üles!\n"
-#~ "\n"
-#~ "\n"
-#~ "Samas ei peaks see olema liiga pikk ja keeruline meelde jätmiseks."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Nüüd saate luua ühe või rohkem \"tavakasutaja\" kontot. Äärmiselt "
-#~ "soovitav\n"
-#~ "on luua igale arvuti kasutajale eraldi konto(d). Sel viisi saab iga "
-#~ "kasutaja\n"
-#~ "valida ise endale sobiva graafilise keskkonna kujunduse ja programmide "
-#~ "sätted.\n"
-#~ "Kõik kasutaja failid saavad hoitud ja kaitstud tema isiklikus "
-#~ "kodukataloogis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Esmalt looge konto iseendale, ka siis kui olete süsteemi ainuke "
-#~ "kasutaja.\n"
-#~ "Ärge tehke oma igapäevatoimetusi juurkasutajana, suurendades sel viisil\n"
-#~ "turvariski! Vale juurkasutaja näpuliigutus võib süsteemi kergesti\n"
-#~ "kasutuskõlbmatuks muuta!\n"
-#~ "\n"
-#~ "\n"
-#~ "Juurkasutaja õigused on ainult administreerimiseks ja hoolduseks,\n"
-#~ "kõike muud tehke palun tavakasutajana"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Alglaadimisketta loomine on äärmiselt soovitatav. Kui peaks kunagi\n"
-#~ "tekkima probleeme süsteemi laadimisel, või alglaadmisketas olla Teie\n"
-#~ "ainuke pääsetee uue installimise kõrval."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO ja grub-i peamised suvandid on:\n"
-#~ "  - Alglaadimisseade: määratakse kõvaketas või partitsioon, kus asub\n"
-#~ "alglaadimissektor. Kui Te just täpselt ei tea, mida teete,\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ooteaeg alglaadimisel: määratakse ooteaeg sekundikümnendikes enne\n"
-#~ "vaikimisi laadimist.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Graafikamood: määratakse VGA tekstmood süsteemi laadimisel. "
-#~ "Võimalikud\n"
-#~ "on järgmised valikud:\n"
-#~ "\n"
-#~ "    * normal: tavaline 80x25 tekstimood\n"
-#~ "\n"
-#~ "    * <number>:  numbrile vastav tekstimood.  - Puhasta /tmp "
-#~ "alglaadimisel: kui soovite kustutada süsteemi alglaadimisel,\n"
-#~ "valige see\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Täpsust RAM hulk kui vajalik: kahjuks ei ole ühtki standardset "
-#~ "meetodit Teie\n"
-#~ "arvutis leiduva operatiivmälu (RAM) koguse äraarvamiseks. Kui siinkohal "
-#~ "on eksimine\n"
-#~ "2 või 4 MB, siis ei maksa sellele väga tähelepanu pöörata."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO on alglaadur SPARC arhitektuurile: see võimaldab laadida\n"
-#~ "kas GNU/Linuxi või mõne muu Teie arvutis oleva operatsioonisüsteemi.\n"
-#~ "Tavaliselt tuvastakse teised operatsioonisüsteemid õigesti ja seadista-\n"
-#~ "takse ka alglaadur. Kui Teil aga ei ole õnne, tuleb parameetrid seada\n"
-#~ "käsitsi. Olge sel juhul hoolas valima õiged."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO peamised suvandid on:\n"
-#~ "  - Alglaaduri paigaldus: määratakse kõvaketas või partitsioon, kus "
-#~ "soovite\n"
-#~ "hoida GNU/Linuxi laadimiseks vajalikku infot. Kui Te just täpselt ei "
-#~ "tea,\n"
-#~ "mida teete, valige \"Kõvaketta esimene sektor (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ooteaeg alglaadimisel: määratakse aeg sekundikümnendikes enne "
-#~ "vaikimisi\n"
-#~ "laadimist."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "On aeg konfigureerida \"X Window System\" ehk lihtsalt X. X on\n"
-#~ "GNU/Linuxi graafilise kasutajaliidese süda. Sel eesmärgil peame koos\n"
-#~ "seadistama Teie graafikakaardi ja monitori. Enamus sellest protsessist\n"
-#~ "on automatiseeritud ja Teie ülesandeks on ainult DrakX-i\n"
-#~ "valikutega nõustuda (või mitte :))\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui saame seadistamisega hakkama, käivitakse X (kui Te ei anna\n"
-#~ "eraldi käsku mitte nii teha)."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Kui midagi on X-i seadistustega valesti, saab siinkohal võimalikke vigu\n"
-#~ "parandada."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Kui eelistate graafilist süsteemi sisenemist, valige \"Jah\". "
-#~ "Konsoolimoodi\n"
-#~ "eelistamisel valige \"Ei\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Nüüd saate valida oma süsteemis kasutatava turvataseme. Palun vaadake "
-#~ "lisainfot selle kohta ka\n"
-#~ " kasutajajuhendist. Üldiselt, kui Te ei tea, mida teete, jätke siia "
-#~ "vaikimisi valik.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Teie süsteem sooritab alglaadimise.\n"
-#~ "\n"
-#~ "Taaskäivitumisel laaditakse Teie uus Mandrake Linux süsteem "
-#~ "automaatselt.\n"
-#~ "Kui soovite laadida mõnd muud operatsioonisüsteemi, lugege palun\n"
-#~ "lisainformatsiooni."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Tðehhi (programmeerijad)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaki (programmeerijad)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Loodava profiili nimi:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Kirjuta /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Vorminda kõik"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Pärast kõigi partitsioonide vormindamist"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "on kõik andmed neil partitsioonidel hävivad"
-
-#~ msgid "Reload"
-#~ msgstr "Laadi uuesti"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Kas soovite luua kiirpaigaldusflopi (abiks korduval paigaldusel)?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL sätted"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Kui võrgus on CUPS server, siis ei ole Teil vaja siin\n"
-#~ "printereid seadistada, need leitakse automaatselt.\n"
-#~ "Kui server asub kuskil kaugemal, peate sisestama CUPS serveri\n"
-#~ "IP-aadress ning soovitavalt ka pordi numbri."
-
-#~ msgid "Remote queue"
-#~ msgstr "Prindijärjekorra nimi"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Prindijärjekorra nimi"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domeeninimi"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Printerit ei ole"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Võrgusätted"
-
-#~ msgid "Profile "
-#~ msgstr "Profiil "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Ühenduse tüüp: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Loo internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Ühenduse nimi"
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "rämps"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Vaikimisi"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Sätete fail ei ole arusaadav."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tundmatu sättefaili"
-
-#~ msgid "Adapter"
-#~ msgstr "Võrgukaart"
-
-#~ msgid "Disable network"
-#~ msgstr "Keela võrguühendus"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Keela võrguühendus"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Nüüd saate oma hiirt testida. Kasutage nii nuppe kui ratast. Kui tundub\n"
-#~ "midagi valesti olevat, klikkige <Katkesta> uue juhtprogrammi valimiseks."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (või ADSL) ühendus"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Hiir"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Võite anda ette ka URI, mille järgi CUPS printeri leiab."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jah, trüki ASCII testlehekülg"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jah, trüki PostSript testlehekülg"
-
-#~ msgid "Paper Size"
-#~ msgstr "Paberi suurus"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Töö lõpetamisel väljasta kogu leht?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Kas optimiseerime kõvaketast?"
-
-#~ msgid "Color depth options"
-#~ msgstr "Mooduli parameetrid:"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Trükkida tekst PostScriptina?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Paranda trepitud tekst?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Lehekülgi ühel paberil"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Lehe laiuse märgid punktides (1/72 tollile)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Lehe kõrguse märgid punktides (1/72 tollile)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Lisa GhostScript parameetrid"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Lisa teksti parameetrid"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Viimane leht enne"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Vali võrguprinteri ühendusviis"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Masinal võib olla mitu printerit, millest igaüks vajab nime\n"
-#~ "(sageli lp) ja printkataloogi. Millist nime peaks kasutama\n"
-#~ "kasutama selle printeri puhul ja kuidas see on ühendatud?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Masinal võib olla mitu prindijärjekorda, millest igaüks vajab nime\n"
-#~ "(sageli lp) ja spuulkataloogi (ajutiste failide jaoks). Millist nime\n"
-#~ "ja kataloogi peaks kasutama selle printeri puhul ja kuidas see on "
-#~ "ühendatud?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Printeri nimi"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spuulkataloog"
-
-#~ msgid "Disable"
-#~ msgstr "Keela"
-
-#~ msgid "Enable"
-#~ msgstr "Luba"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN sätted"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Teenusepakkuja DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Teenuspakkuja DNS 2"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "ühendamine ebaõnnestus: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Turvalisema süsteemi saamiseks peaksite valima \"Kasuta varjutatud \n"
-#~ "paroolifaili\" ja \"Kasuta parooli kaitsmiseks MD5 algoritmi\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Kui Teie võrgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
-#~ "korral\n"
-#~ "küsige võrguhaldurilt."
-
-#~ msgid "yellow pages"
-#~ msgstr "NIS YP"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kuidas soovite luua internetiühendust?"
-
-#~ msgid "Configure..."
-#~ msgstr "Seadista..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Valitud suurus %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Testime Teie ühendust..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Seadistused: Lisa asukoht"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "See skript proovib seadistada USB hiirt"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Alglaadimise stiil"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nüüd on internetiühendus seadistatud aga Teie arvutit\n"
-#~ "saab panna ka seda jagama teistele arvutitele kohtvõrgus.\n"
-#~ "Märkus: kohtvõrgu jaoks on vajalik eraldi võrgukaardi olemasolu\n"
-#~ "\n"
-#~ "Kas soovite internetiühendust jagada?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Internetiühenduse jagamine"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automaatsed sõltuvused"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB seadistamine"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Loo alglaadimisflopi"
-
-#~ msgid "Choice"
-#~ msgstr "Valik"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horisontaalne kena aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikaalne tavaline aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Nüüd saate valida mitmesuguseid süsteemi käitumise võimalusi.\n"
-#~ "\n"
-#~ "* Optimiseeri kõvaketast: selle variandi puhul saate kiirendada\n"
-#~ "  kõvaketta poole pöördumist, kuid teatud vigaste emaplaatide puhul \n"
-#~ "  võite kõvaketta rikkuda. Valige, kui olete endas kindel.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Valige turvatase: saate valida oma süsteemi turvalisuse taseme.\n"
-#~ "  Palun vaadake manuaali, et saada turvatasemetest täielik ülevaade.\n"
-#~ "  Kui kahtlete, valige \"Keskmine\", et saada tõesti turvalist süsteemi,\n"
-#~ "  valige \"Paranoiline\" aga olge ettevaatlik, näiteks EI SAA SELLEL "
-#~ "TASEMEL\n"
-#~ "  JUURKASUTAJA SISSE LOGIDA! Peate kasutama käsku 'su'. Mida "
-#~ "turvalisem, \n"
-#~ "  seda keerulisem kasutada!\n"
-#~ "\n"
-#~ "* Täpsusta operatiivmälu mahtu: võib esineda olukord, kus GNU/Linux ei\n"
-#~ "  ole suuteline detekteerima täpselt operatiivmälu suurust. Kui see on\n"
-#~ "  nii juhtunud, saate öelda ette tegeliku mäluhulga. Paneme tähele, et\n"
-#~ "  erinevus 2-4MB tuvastatud ja tegeliku mälu hulga vahel on normaalne.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Irdandmekandjate automaatne ühendamine (supermount): Teie flopid, CD-d\n"
-#~ "  ja Zip-kettad ühendatakse automaatselt (ilma mount/umount kasutamata)\n"
-#~ "\n"
-#~ "\n"
-#~ "* Puhasta \"/tmp\" alglaadimisel: süsteemi laadimisel kustutatakse kõik   "
-#~ "failid \"/tmp\" kataloogist.\n"
-#~ "\n"
-#~ "* Võimalda NumLock alglaadimisel: süsteemi laadimisel muudetakse\n"
-#~ "  konsoolimoodis NumLock aktiivseks"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "Vabandan, aga meili seadistamine ei ole praegu veel võimalik."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "See siin on võrguühenduse abimees.\n"
-#~ "Mis komponente soovite seadistada?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internetiühendus"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Muud sätted"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Muud küsimused"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Kõrgel turvatasemel ei saa supermount-i kasutada"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "SELLEL TURVATASEMEL EI OLE VÕIMALIK SÜSTEEMI SISENEDA JUURKASUTAJANA!\n"
-#~ "Juurkasutaja õiguste saamiseks tuleb siseneda tavakasutajana ja siis \n"
-#~ "kasutada \"su\"-d.\n"
-#~ "Serveri puhul on selline piirang täiesti mõistlik.\n"
-#~ "Teid on igal juhul hoiatatud."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Olge ettevaatlik, NumLock-i kasutamine võib põhjustada (eriti kantavatel\n"
-#~ "arvutitel) probleeme."
-
-#~ msgid "not connected"
-#~ msgstr "ei ole ühendatud"
-
-#~ msgid "Actions"
-#~ msgstr "Tegevused"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Teadusrakendused"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Server, Faili/prindi/samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Server, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Esimene nimeserver:"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Teine nimeserver:"
-
-#~ msgid "using module"
-#~ msgstr "kasutades moodulit"
-
-#~ msgid "Development, Database"
-#~ msgstr "Arendus, Andmebaasid"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Arendus, Graafilised keskkonnad"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Arendus, standardvahendid"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Hoiatus:\n"
-#~ "Muudatuste rakendamine võib X keskkonna endast välja viia."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Jätkamisel olen sunnitud Teie %s keskkonna seiskama"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Millist alglaadurit soovite kasutada?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Kiirpaigaldusflopi"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Kas otsida modemit?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Seadista ISDN ühendus"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Keela ühendus Internetti"
-
-#~ msgid "Configure local network"
-#~ msgstr "Kohtvõrgu seadistamine"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Seadista internetiühendus / Seadista kohtvõrk"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Kohtvõrk on juba seadistatud.\n"
-#~ "Kas soovite:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Seadistan uuesti abimehega..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Graafikaprogrammid"
-
-#~ msgid "Sciences"
-#~ msgstr "Teadused"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Jututamise (IRC või IM) programmid xchat, licq, gaim ja failiülekande "
-#~ "vahendid"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Suhtlemisvahendid"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Interneti värgid"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Andmebaasiserveri ja -kliendid (mysql ja postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "C/C++ arendus"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Ajavöötme määramine"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Esimene võrguliides (eth0)"
-
-#~ msgid "isdn_internal"
-#~ msgstr "isdn_internal"
-
-#~ msgid "ippp0"
-#~ msgstr "ippp0"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(võib tekitada andmete hävimist)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Lülita Num Lock käivitamisel sisse"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Salasõna uuesti"
-
-#~ msgid "default"
-#~ msgstr "tavaline"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Milline on Teie süsteemi kasutusala?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Valige paigalduse maht"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Kasuta diskdrake-i"
-
-#~ msgid "Customized"
-#~ msgstr "Isetehtud"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Olete ikka kindlasti ekspert? \n"
-#~ "Hei, ilma naljata, eksperdi valikud on laiemad kuid sellevõrra "
-#~ "ohtlikumad.\n"
-#~ "\n"
-#~ "Teilt küsitakse küsimusi näiteks 'paroolifaili varjutamise' jms kohta,\n"
-#~ "olete Te selleks valmis?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Kasuta varjutatud paroolifaili"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Kasuta parooli kaitsmiseks MD5 algoritmi"
-
-#~ msgid "Search"
-#~ msgstr "Otsi"
-
-#~ msgid "Package"
-#~ msgstr "Pakett"
-
-#~ msgid "Tree"
-#~ msgstr "Puu"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortimine"
-
-#~ msgid "Category"
-#~ msgstr "Kategoori"
-
-#~ msgid "Installed packages"
-#~ msgstr "Installitud paketid"
-
-#~ msgid "Available packages"
-#~ msgstr "Kättesaadavad paketid"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Näita ainult üksikuid"
-
-#~ msgid "Expand all"
-#~ msgstr "Ava kõik"
-
-#~ msgid "Collapse all"
-#~ msgstr "Sule kõik"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Lisa pakettide asukoht"
-
-#~ msgid "Update location"
-#~ msgstr "Uuenda asukoht"
-
-#~ msgid "Find Package"
-#~ msgstr "Leia pakett"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Leia pakett faili järgi"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Installitud/Saadaval"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Kontrollin sõltuvusi"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Eemaldatakse järgmised paketid"
-
-#~ msgid "Regexp"
-#~ msgstr "Regulaaravaldis"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Milline pakett vajab ressurssi"
-
-#~ msgid "No match"
-#~ msgstr "Ei leitud sobivat"
-
-#~ msgid "No more match"
-#~ msgstr "Ei leitud enam sobivaid"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake on hetkel \"säästuresiimil\".\n"
-#~ "Failide otsimiseks käivitan rpmdrake uuesti"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Millist faili Te otsite?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Mida Te otsite?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Andke nimi (nagu: 'extra, 'commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Kataloog"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CD-d ei leitud (vähemalt mitte /mnt/cdrom all)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL kataloogile, kus paiknevad RPM-id"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ja HTTP jaoks on vaja ka hdlist-i asukohta\n"
-#~ "See peab olema antud eelmise URLi suhtes"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Palun järgmist informatsiooni"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s on juba kasutusel"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Uuendan RPM andmebaasi"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Eemaldan kirje %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Leian ülejäägid"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Ülejääkide leidmine võtab veidi aega"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Leitud ISDN kaart:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Muud maad"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Millisel maal Te praegu olete ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Kui teil on Alcatel-i modem, valige Alcatel. Muidu aga ECI"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ära kasuta pppoe-d"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (tähtis)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (väga kena)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (kena)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Millisesse seerialporti on Teie hiir ühendatud?"
-
-#~ msgid "Czech"
-#~ msgstr "T¨ehhi"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaki"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Ei saa installida 'ipchains' paketti urpmi abil."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Ei saa installida DHCP paketti urpmi abil."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Ei saa installida linuxconf-i urpmi abil."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Ei saa installida 'bind' paketti urpmi abil."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Ei saa installida nimeserveri vahendajat urpmi abil."
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Seadista kohtvõrk uuesti"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Teie arvutit saab seadistada internetiühenduse jagajana.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Kõik sai seadistatud.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Kasuta Interneti jaoks tavamodemit"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Kasuta Interneti jaoks ISDN modemit"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Kasuta Interneti jaoks DSL (või ADSL) modemit"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Kasuta Interneti jaoks DOC kaablimodemit"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Mittekasutamise aeg, mille jooksul ühendus\n"
-#~ "katkestatakse. (vaikimisi ei katkestata)"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Saksa (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Mida Te soovite teha?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installi/Taasta"
-
-#~ msgid "Rescue"
-#~ msgstr "Taasta"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Mis tüüpi partitsiooni soovite?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Valige \"Installimine\" kui varem sellele masinale GNU/Linuxit ei ole "
-#~ "pandud\n"
-#~ "või soovite kasutada mitut distributsiooni\n"
-#~ "\n"
-#~ "Valige \"Taastamine\" kui soovite taastada mõnd eelmist Mandrake "
-#~ "Linuxit:\n"
-#~ "%s või %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Soovitatav: Te pole kunagi varem GNU/Linuxit installinud. \n"
-#~ "\n"
-#~ "  - Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ "    Teie vajadustele. Järgmisena saate teha valikud sõltuvalt Teie "
-#~ "arvuti\n"
-#~ "    edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "    süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-#~ "    Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA "
-#~ "TEETE!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "SEAL\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Nüüd peaksite valima partitsioon(id) Mandrake Linux installimiseks\n"
-#~ "kui need on juba varem kettale defineeritud. Kui Te varem ei ole oma\n"
-#~ "kõvaketast Linuxi jaoks partitsioneerinud, saate seda järgmises etapis\n"
-#~ "teha. Partitsioneerimine tähendab füüsilise ketta jaotamist loogiliselt\n"
-#~ "eraldatud osadeks.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui ei tunne ennast sel alal kindlalt, valige \"Paiguta ise\", et\n"
-#~ "automaatselt luua Linuxile vajalikud partitsioonid.\n"
-#~ "Linuxi maailmas tähendab \"hda\" esimest, \"hdb\" teist IDE kõvaketast,\n"
-#~ "\"sda\" esimest. \"sdb\" teist SCSI kõvaketast jne. Partitsioneerimiseks\n"
-#~ "valige kettaseade lihtsalt sellel klikkides.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kaks tavalist partitsiooni on juurpartitsioon (/), kus asub "
-#~ "failisüsteemi\n"
-#~ "hierarhia algus ja /boot, mis sisaldab arvuti alglaadimiseks vajalikke "
-#~ "faile, sealhulgas Linuxi kernelit.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kuna partitsioneerimine ei ole pööratav protsess, võib see tekitada\n"
-#~ "algajas kerget kõhedust. DiskDrake on selle teinud küll lihtsamaks,\n"
-#~ "aga kindlasti tuleks enne iga liigutust sügavalt järele mõtelda ja\n"
-#~ "soovitavalt ka dokumentatsiooniga tutvuda.\n"
-#~ "\n"
-#~ "Kõiki tegevusi saate teha ka ainult klaviatuuri kasutades: liikuge\n"
-#~ "partitsioonidel <TAB> ja üles-alla noolte abil. Partitsiooni valikul\n"
-#~ "\n"
-#~ "- Ctrl-C  loob uue partitsiooni (valige selleks vaba kettaala)\n"
-#~ "- Ctrl-D  kustutab partitsiooni\n"
-#~ "\n"
-#~ "- Ctrl-M  seab ühenduspunkti\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Kõik Teie poolt värskelt loodud partitsioonid tuleb kasutamiseks "
-#~ "vormindada\n"
-#~ "(luua failisüsteemid). Partitsiooni vormindamisel hävitatakse kõik "
-#~ "andmed,\n"
-#~ "mis seal iganes leiduvad. Pange tähele, et varem vormindatud ja "
-#~ "vajalikke\n"
-#~ "andmeid sisaldavaid partitsioone, tüüpiliselt /home ja /usr/local, ei "
-#~ "ole\n"
-#~ "mõistlik üle vormindada, vaid need võib jätta nii nagu on."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Nüüd hakkan Teie valitud pakette installima. Selleks peaks kuluma\n"
-#~ "mõnikümmend minutit. Süsteemi uuendamisel kulub aega küll veidi rohkem,\n"
-#~ "sest siis tuleb enne olemasolevaid pakette analüüsida."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Kui DrakX ei suutnud Teie hiirt tuvastada, või soovite vaadata, mida\n"
-#~ "leiti, kuvatakse Teile ülalpool \"hiiretõugude\" nimekiri.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete valikuga nõus, minge lihtsalt vasakpoolses menüüs edasi.\n"
-#~ "Vastasel juhul valige hiire tüüp, mis Teie arvates kõige paremini Teie\n"
-#~ "hiirt iseloomustab\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui tegemist on seerialpordi hiirega, peate ütlema ka, mis porti ta on\n"
-#~ "ühendatud."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "See sektsioon on pühendatud kohtvõrgu (LAN) või sissehelistamisteenuse\n"
-#~ "(DialUp) sätete paikapanemisele.\n"
-#~ "\n"
-#~ "Kui vastate \"LAN\", siis proovitakse Teie arvutist leida võrgukaarti.\n"
-#~ "Kui Teie võrgukaart töötab PCI siinil, peaks ta olema leitav ja "
-#~ "kasutatav\n"
-#~ "automaatselt. ISA kaardi puhul, võib automaatne otsing alt vedada ja Te\n"
-#~ "peate juhtprogrammi ise nimekirjast valima.\n"
-#~ "\n"
-#~ "\n"
-#~ "SCSI kaartide puhul peab juhtprogramm esmalt leidma SCSI liidese, "
-#~ "vastasel\n"
-#~ "juhul peate pöörduma kaardi müüja poole.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui installite Mandrake Linux süsteemi masinale, mis on osake juba "
-#~ "töötavast\n"
-#~ "kohtvõrgust, annab võrgu haldaja Teile kogu vajaliku informatsiooni (IP-\n"
-#~ "aadressi, alamvõrgu maski ja masina nime). Kui seate üles oma privaatset\n"
-#~ "võrku, peaksite ise valima aadressid \n"
-#~ "\n"
-#~ "Kui soovite Internetti kasutada modemi ja sissehelistamisteenuse kaudu,\n"
-#~ "valige \"DialUp\" ja DrakX proovib otsida Teie arvutist modemit. Kui\n"
-#~ "modemit ei leita, peate sisestama seerialpordi, kuhu kavatsete modemi\n"
-#~ "ühendada."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linuxi all saate kasutada mitmesuguseid printereid. Igaüks neist nõuab\n"
-#~ "erinevaid sätteid töötamiseks. Siiski tasub tähele panna, et süsteem\n"
-#~ "kasutab nime 'lp' vaikimisi printeri jaoks; seega peab Teil üks \n"
-#~ "selliselt tähistatud, kuigi printeri(te)le võib panna '|' märgiga "
-#~ "eraldatult\n"
-#~ "mitu nime. Kui eelistate \"tähendusega\" nimesid, pange nimeks\n"
-#~ "näiteks \"Minu printer|lp\" ja see saab olema Teie vaikimisi printer.\n"
-#~ "\n"
-#~ "Kui Teie printer on otse arvuti külge ühendatud, valige \"Kohalik printer"
-#~ "\".\n"
-#~ "Siis saate valida pordi kuhu see on ühendatud ja printerile vastava "
-#~ "filtri.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada printerit, mis on ühendatud Un*x serveriga, peate\n"
-#~ "Valima \"lpd võrguprinter\". Niisugusel juhul ei vaja Te kasutajatunnust\n"
-#~ "ega salasõna, vaid ainult serveri nime ja printimisjärje nime serveril.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada SMB printserverit (st. printerit, mida jagab välja\n"
-#~ "Windows 9x/NT, peate ära näitama serveri SMB nime (mis ei pea olema sama\n"
-#~ "TCP/IP nimega) ja kindluse mõttes ka IP-aadressi. Loomulikult on vaja "
-#~ "teada\n"
-#~ "ka serveri poolt jagatava printeri nime ning kasutajatunnust, salasõna "
-#~ "ja\n"
-#~ "töögrupi nime. Sama, välja arvatud töögrupp, on vaja teada ka NetWare\n"
-#~ "printserveri kasutamise korral."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "On äärmiselt soovitatav vastata siin \"Jah\"! Näiteks, kui installite\n"
-#~ "samasse masinasse hiljem MS Windowsi, kirjutab see üle bootsektori.\n"
-#~ "Ilma alglaadimisflopita ei ole Teil siis enam võimalik GNU/Linuxit\n"
-#~ "laadida."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Liigutage ratast!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Muutusi ei teinudki?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Mis tüüpi hiirt kasutate?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Väljapakutavad kuvatihedused"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Et leida võimalikke kuvatihedusi, testin erinevaid variante.\n"
-#~ "Ekraan Teie ees hakkab vilkuma...\n"
-#~ "Kui soovite, lülitage monitor välja. Kui valmis saan, kostab piiks"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Me võime proovida leida kuvatihedust, näiteks 800x600.\n"
-#~ "Siiski, vahel ajab see arvuti segadusse.\n"
-#~ "Soovite proovida?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Sobivat olekut ei leitud\n"
-#~ "Proovige palun muud graafikakaarti või monitori"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automaatne kuvatiheduste otsing"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB hiir"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB hiir (2 nuppu)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB hiir (3+ nuppu)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB hiir"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB hiir (2 nuppu)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB hiir (3+ nuppu)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus hiir"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus hiir"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus hiir"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB hiir (3 või enam nuppu)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A või kõrgem (seerial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (seerial)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (seerial)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (seerial)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Lihtsalt hiir (seerial)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsofti ühilduv (seerial)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Lihtsalt 3-nupuline hiir (seerial)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (seerial)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr "Internetiühenduse jaoks on vaja seadistada võrguliides."
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "Palun valige millist võrguliidest soovite kasutada kohtvõrgu\n"
-#~ "jaoks.\n"
-#~ "Kui Te ei tea, valige eth0.\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "NFS ühendamine ebaõnnestus"
-
-#~ msgid "Socket"
-#~ msgstr "Pistik"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX saab luua sättefailid nii XFree 3.3 kui ka XFree 4.0. \n"
-#~ "Vaikimisi kasutatakse 4.0, kui see toetab Teie riistvara\n"
-#~ "\n"
-#~ "Kas soovite jääda XFree versiooni 3.3 juurde?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Krüpto"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Seadista X"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Ei seadista võrku"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Kas soovite kasutada kohtvõrku?"
-
-#~ msgid "Show less"
-#~ msgstr "Näita vähem"
-
-#~ msgid "Show more"
-#~ msgstr "Näita rohkem"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Kasuta kogu ketast"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "Kohalik printer"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "Võrguliides"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Otse ühendatud printer"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(nte that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "Mis porti on Teie printer ühendatud? \n"
-#~ "(paneme tähele, et /dev/lp0 on sama mis LPT1:)?"
-
-#~ msgid "tie"
-#~ msgstr "pintsaklips"
-
-#~ msgid "brunette"
-#~ msgstr "brünett"
-
-#~ msgid "girl"
-#~ msgstr "neiu"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondiin"
-
-#~ msgid "automagic"
-#~ msgstr "automaagiline"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Anti Teile masinanimi"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "Kohtvõrgu seaded"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Millist C-klassi võrku soovite kasutada.\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "Internetiühenduse jagamine - liides %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Seatakse sätted järgmisele võrguliidesele:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#
-#~ msgid "Everything configured!"
-#~ msgstr "Kõik seadistatud!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Milline on Teie klaviatuuriasetus"
-
-#~ msgid ""
-#~ "\n"
-#~ "I recommend that you abort, and then launch this internet wizard after "
-#~ "installation.It will then be able to setup ISA or PCMCIA cards easier.\n"
-#~ "\n"
-#~ "But, if you know the irq, dma, io of your card, you can still configure "
-#~ "your card."
-#~ msgstr ""
-#~ "\n"
-#~ "Soovitan teil praegu katkestada ja käivitada võrguühenduse abimees pärast "
-#~ "installimist uuesti. Siis on võimalik Teie ISA või PCMCIA kaarte lihtsam\n"
-#~ "seadistada\n"
-#~ "Muidugi, kui teil on teada oma kaardi IRQ, DMA ja IO, ei ole probleemi."
-
-#~ msgid "pptp alcatel"
-#~ msgstr "Paiguta ise"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Kas otsida PCMCIA kaarte?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Kas otsida %s seadmeid?"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "Väike (%d MB)"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Kas soovite kasutada DialUp ühendust modemi kaudu?"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Kas soovite kasutada ISDN ühendust?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Kas otsida PCI seadmeid?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Otsin juurpartitsiooni.."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: See ei ole juurpartitsioon, palun valige mõni muu."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Millist partitsiooni soovite kasutada juurkataloogi jaoks?"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "X stardib nüüd"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "Valige uus suurus"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Teil ei ole ühtki Windowsi partitsiooni!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Teil ei ole piisavalt ruumi Lnx4win jaoks"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tere tulemast! Laadimisel aitab Teid LILO!\n"
-#~ "\n"
-#~ "Valikud kuvab <Tab>.\n"
-#~ "\n"
-#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
-#~ "vaikimisi oodake %d sekundit.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tere tulemast! Laadimisel aitab Teid SILO!\n"
-#~ "\n"
-#~ "Valikud kuvab <Tab>.\n"
-#~ "\n"
-#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
-#~ "vaikimisi oodake %d sekundit.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO peasätted"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Praegu on SILO jaoks kirjeldatud alltoodud kirjed.\n"
-#~ "Te võite neid lisada ning olemasolevaid muuta."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Selline tähis on juba kasutusel"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO installimine ebaõnnestus. Tekkis järgnev viga:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX proovib esmalt leida Teie süsteemist SCSI liideseid PCI siinil.\n"
-#~ "Kui neid leitakse, ja vastav juhtprogramm on teada, siis laetakse\n"
-#~ "see mällu automaatselt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teie SCSI liides kasutab ISA siini või kui DrakX ei tea,\n"
-#~ "millist juhtprogrammi kasutada või Teil ei ole üldse SCSI liidest,\n"
-#~ "siis küsitakse Teilt selle kohta.\n"
-#~ "Kui Teil SCSI liidest tõesti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
-#~ "on, siis vastake \"Jah\". Seejärel lastakse Teil nimekirjast sobiv\n"
-#~ "juhtprogramm valida.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete juhtprogrammi välja valinud, on Teil võimalus anda sellele\n"
-#~ "ka parameetreid. Siiski, enamasti läheb kõik kenasti ka ilma neid\n"
-#~ "sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui automaatne parameetrite otsimine ei tööta, pöörduge palun\n"
-#~ "oma SCSI liidese dokumentatsiooni poole. Ka samas masinas olev Windows\n"
-#~ "oskab vahel SCSI kohta vajalikku informatsiooni anda."
-
-#~ msgid "Shutting down"
-#~ msgstr "Sulgemine"
-
-#~ msgid "useless"
-#~ msgstr "kasutu"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "Teie arvutist mõned hulk Windowsi TrueType fondid.\n"
-#~ "Soovite Te neid ka Linuxis kasutada (eeldusel, et Teil on need legaalsed)?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Valige \"Installimine\" kui varem sellele masinale Linuxit ei ole pandud\n"
-#~ "või soovite kasutada mitut distributsiooni\n"
-#~ "\n"
-#~ "\n"
-#~ "Valige \"Uuendamine\" kui soovite uuendada mõnd eelmist Mandrake "
-#~ "Linuxit:\n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000 või 7.0 (Air)."
-
-#~ msgid "Creating and formatting loopback file %s"
-#~ msgstr "Loon ja vormindan loopback faili %s"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Soovite LILO-t kasutada?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Nüüd võite valida paketigrupi, mida soovite installida või uuendada.\n"
-#~ "Soovi korral saate valida pakette ka lisaks vastavalt oma äranägemisele\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete valinud paigaldusviisi \"Ekspert\", saate pakette ükshaaval\n"
-#~ "Tähelepanu! Mõned paketid võivad nõuda, et oleks installitud ka mõned\n"
-#~ "teised. Neid nimetatakse paketi sõltuvusteks. Paketi valimisel valitakse\n"
-#~ "automaatselt ka kõik tema sõltuvused. Paketi installimine ilma kõiki\n"
-#~ "sõltuvusi rahuldamata, on võimatu."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) oskab laadida erinevaid Teie arvuti leiduvaid\n"
-#~ "operatsioonisüsteeme. Tavaliselt tuvastatakse need installimise käigus.\n"
-#~ "Kui Te ei näe neid tuvastatuna, saate need nüüd lisada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Te ei soovi mõnd neist laadida, võite selle kohe eemaldada. Sellisel\n"
-#~ "juhul vajate selle laadimiseks vastavat alglaadimisflopit."
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Pakettide valik"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Valige:\n"
-#~ "\n"
-#~ "  - Soovitatav: Te pole kunagi varem Linuxit installinud.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Oma segu: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ "Teie vajadustele. Järgmisena saate teha valikud \"Tööjaam\", \"Arendus\"\n"
-#~ "ja \"Server\", sõltuvalt Teie arvuti edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "süsteemi, mis sobiks nagu valatult Teie täpsete ootustege."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Laadime krüptopakette"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "SCSI seadistamine"
-
-#~ msgid "Local LAN"
-#~ msgstr "LAN"
-
-#~ msgid "developer"
-#~ msgstr "arendaja"
-
-#~ msgid "beginner"
-#~ msgstr "algaja"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "lineaarne (vajalik mõnedel SCSI ketastel)"
-
-#~ msgid "linear"
-#~ msgstr "linearne"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Pärast %s partitsioneeri %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "tüübi muutmine"
-
-#~ msgid "resizing"
-#~ msgstr "suuruse muutumine"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Suurus: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Loetamatu kickstart fail %s (%s viga)"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Valitud on liiga palju pakette: %dMB ei mahu %dMB-le"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Paigalduseks valitud %d MB. Võite veel programme juurde valida"
-
-#~ msgid "Enter a floppy (all data will be lost)"
-#~ msgstr "Pange tühi flopi masinasse (andmed sellel hävivad)"
-
-#~ msgid "Password:"
-#~ msgstr "Salasõna:"
-
-#~ msgid "User name:"
-#~ msgstr "Kasutajatunnus:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "HTP alglaadimisketta loomine ebaõnnestus.\n"
-#~ "Taasalustage installimist, andes parameetriks ``%s''"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Peate taasalustama installimist uute parameetritega"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Peate taasalustama installimist, laadides flopikettalt"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Sisesta flopi HTP alglaadimisketta loomiseks\n"
-#~ "(kõik andmed flopil hävivad)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Kirje %s on juba olemas"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Paigaldus või uuendamine"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Mis kasutusala soovite?"
diff --git a/perl-install/share/po/eu.po b/perl-install/share/po/eu.po
deleted file mode 100644
index 2baf3fd1e..000000000
--- a/perl-install/share/po/eu.po
+++ /dev/null
@@ -1,12369 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Joseba Bidaurrazaga van Dierdonck <jbv@euskalnet.net>, 1999-2001.
-# Iñigo Salvador Azurmendi <xalba@euskalnet.net>, 2001
-# Elhuyar, 2002
-# Lore Azkarate <lazkarate@uzei.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-12-20 11:28+0100\n"
-"Last-Translator: Josu Waliño <josu@elhuyar.com>\n"
-"Language-Team: Euskara <linux-eu@chanae.alphanet.ch>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Buru guztiak independenteki konfiguratu"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Erabili Xinerama hedapena"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguratu \"%s\" (%s) txartela soilik"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Buru anitzeko konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Zure sistemak buru anitzeko konfigurazioa onartzen du.\n"
-"Zer egin nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Txartel grafikoa"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Hautatu txartel grafiko bat"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Aukeratu X zerbitzaria"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X zerbitzaria"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Aukeratu X kontrolatzailea"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X kontrolatzailea"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree-ren zein konfigurazio izan nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria eduki dezake, baina "
-"XFree %s(r)ekin soilik.\n"
-"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
-"2Dan."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
-"ekin."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 3D hardware-azelerazioarekin"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
-"ekin,\n"
-"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 3D hardware-azelerazio ESPERIMENTALAREKIN"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake, baina XFree "
-"%s(r)ekin soilik,\n"
-"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
-"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
-"2Dan."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalazioaren bistaratze-kontrolatzailea)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Hautatu txartel grafikoaren memoria-tamaina"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Hautatu zerbitzariaren aukerak"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Aukeratu monitorea"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitorea"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Bi parametro kritikoak freskatze-maiztasun bertikala eta sinkronizazio-"
-"maiztasun\n"
-"horizontala dira. Lehenengoak pantaila osoa freskatzeko maiztasuna \n"
-"zehazten du eta bigarrenak, eskaneatze-lerroak bistaratzekoa.\n"
-"\n"
-"OSO GARRANTZITSUA da zure monitoreak onar dezakeena baino sinkronizazio-"
-"balio \n"
-" handiagoko monitorerik ez zehaztea: monitorea honda dezakezu.\n"
-" Zalantzarik baduzu, aukeratu ezarpen kontserbadore bat."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Freskatze-maiztasun horizontala"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Freskatze-maiztasun bertikala"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitorea konfiguratu gabe"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Txartel grafikoa oraindik konfiguratu gabe"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Bereizmenak oraindik aukeratu gabe"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Konfigurazioa probatu nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Kontuz: txartel grafiko hau probatzean ordenagailua blokea daiteke"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Konfigurazioaren proba"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"saiatu parametro batzuk aldatzen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Errorea gertatu da:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d segundo barru irtengo da"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ezarpen hau zuzena da?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Errorea gertatu da, saiatu parametro batzuk aldatzen"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Bereizmena"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Aukeratu bereizmena eta kolorearen sakonera"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Txartel grafikoa: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 zerbitzaria: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Gehiago"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ados"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Aditu modua"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Erakutsi dena"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Bereizmenak"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Teklatu-diseinua: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Sagu-mota: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Sagu-gailua: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitorea: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorearen SinkHoriz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorearen FreskBert: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Txartel grafikoa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Txartel grafikoaren identifikazioa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria grafikoa: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorearen sakonera: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Bereizmena: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 zerbitzaria: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 kontrolatzailea: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window konfigurazioa prestatzen"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Zer egin nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Aldatu monitorea"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Aldatu txartel grafikoa"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Aldatu zerbitzariaren aukerak"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Aldatu bereizmena"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Erakutsi informazioa"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probatu berriro"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Irten"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Aldaketak mantendu?\n"
-"Hau da uneko konfigurazioa:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X abioan"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ordenagailua abiatzean X automatikoki abiarazteko konfigura dezaket.\n"
-"Berrabiaraztean X hastea nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Hasi berriro saioa %s(e)n aldaketak aktibatzeko"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Amaitu saioa eta, ondoren, sakatu Ktrl-Alt-Atzera"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kolore (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mila kolore (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mila kolore (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioi kolore (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 mila milioi kolore (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB edo gehiago"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estandarra 640x480 - 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 - 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 bateragarria, 1024x768 - 87 Hz gurutzelarkatua (ez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 - 87 Hz gurutzelarkatua, 800x600 - 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA hedatua, 800x600 - 60 Hz, 640x480 - 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Gurutzelarkatu gabeko SVGA, 1024x768 - 60 Hz, 800x600 - 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Frekuentzia altuko SVGA, 1024x768 - 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 - 60 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 - 74 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 - 76 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 - 70 Hz egin dezakeen monitorea"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 - 76 Hz egin dezakeen monitorea"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Arrankeko partizioaren lehen sektorea"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Unitateko lehen sektorea (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalazioa"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Non instalatu nahi duzu abioko kargatzailea?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalazioa"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO testu-menuarekin"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO menu grafikoarekin"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Windows-etik abiarazi (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Abioko kargatzailearen aukera nagusiak"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Erabili beharreko abioko kargatzailea"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Abioko kargatzailearen instalazioa"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Abioko gailua"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ez du funtzionatzen BIOS zaharretan)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Trinkoa"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "trinkotu"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Bideo modua"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Imajina lehenetsia abiarazi arteko atzerapena"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasahitza"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasahitza (berriro)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Murriztu komando-lerroko aukerak"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "murriztu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Garbitu /tmp abiatzen den bakoitzean"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Zehaztu RAM tamaina beharrezkoa bada (%d MB aurkituak)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Gaitu profil anitzak"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Eman ram-tamaina MBtan"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``Murriztu komando-lerroko aukerak'' aukera ezin da erabili pasahitzik gabe"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Saiatu berriro"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Pasahitzak ez datoz bat"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Hasierako mezua"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware-ren atzerapena"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Nukleoaren abioaren denbora-muga"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Gaitu CDtik abiaraztea?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Gaitu OF abiaraztea?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "SE lehenetsia?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Partizio batean abioko kargatzailea instalatzea erabaki duzu.\n"
-"Horrek esan nahi du baduzula abioko kargatzaile bat abioko unitatean (adib.: "
-"System Commander).\n"
-"\n"
-"Zein da zure abioko unitatea?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hauek dira sarrerak.\n"
-"Beste batzuk gehi ditzakezu edo lehendik daudenak aldatu."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Gehitu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Eginda"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Aldatu"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Zer sarrera-mota gehitu nahi duzu?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Beste SE bat (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Beste SE bat (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Beste SE bat (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imajina"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Erantsi"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Irakurri/idatzi"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taula"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Ez-segurua"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiketa"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Lehenetsia"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-tamaina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "BideorikEz"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Kendu sarrera"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Ez da etiketa hutsik onartzen"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Nukleo-imajina bat zehaztu behar duzu"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Erroko partizio bat zehaztu behar duzu"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Etiketa hau jadanik erabili da"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s interfaze aurkitu dira"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Baduzu besterik?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ba duzu %s interfazerik?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ez"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Bai"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ikus hardwarearen informazioa"
-
-# #this syntax doesn't work yet in perl :-(
-# #msgid "Installing driver for %s card %s"
-# #msgstr "%2$s %1$s txartelaren kontrolatzailea instalatzen"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s %s txartelaren kontrolatzailea instalatzen"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modulua)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Zein %s kontrolatzaile probatu behar dut?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kasu batzuetan, %s kontrolatzaileak informazio gehigarria behar du egoki \n"
-"funtzionatzeko, nahiz eta normalki hori gabe ongi funtzionatzen duen. Aukera "
-"gehigarriak zehaztu \n"
-"nahi dituzu, edo kontrolatzaileari zure makina probatzen\n"
-"utzi, behar duen informazioa bilatzeko? Batzuetan, probatzeak ordenagailua "
-"blokeatuko du, baina\n"
-"horrek ez luke kalterik egin beharko."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autoproba"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Zehaztu aukerak"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Orain %s moduluari bere aukerak eman dizkiozu.\n"
-"Ohartu helbiderean aurretik 0x aurrizkia jarri behar dela, adlib. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Orain %s moduluari bere aukerak eman diezazkiokezu.\n"
-"Aukerak ``izena=balioa izena2=balioa2 ...'' formatuan daude.\n"
-"Adibidez, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulu-aukerak:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Huts egin du %s modulua kargatzean.\n"
-"Beste parametro batzuekin saiatu nahi duzu berriro?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "X programen atzipena"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "rpm tresnen atzipena"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "onartu \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "administrazio-fitxategien atzipena"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s jadanik gehituta)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Pasahitz hau sinpleegia da"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Eman erabiltzaile-izen bat"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Erabiltzaile-izenak minuskulaz idatzitako letrak, zenbakiak, `-' eta `_' "
-"soilik izan ditzake"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Erabiltzaile-izen hau gehituta dago jadanik"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Gehitu erabiltzailea"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sartu erabiltzaile bat\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Onartu erabiltzailea"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Benetako izena"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Erabiltzaile-izena"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikonoa"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatikoki hasi saioa"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ordenagailua konfigura dezaket automatikoki erabiltzaile bat sartzeko.\n"
-"Eginbide hau erabili nahi duzu?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Aukeratu erabiltzaile lehenetsia:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Aukeratu exekutatu beharreko leiho-kudeatzailea:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Aukeratu erabiltzeko hizkuntza bat."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Instalatu ondoren erabilgarri egongo diren beste hizkuntza batzuk aukera "
-"ditzakezu"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Denak"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Eman baimena erabiltzaile guztiei"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Pertsonalizatua"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ez konpartitu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "%s paketea instalatu egin behar da. Instalatu nahi duzu?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "NFS edo Samba erabiliz esporta dezakezu. Zein nahi duzu"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Derrigorrezko %s paketea falta da"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Utzi"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Abiarazi userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Erabiltzaileen araberako konpartitzeak \"fileshare\". \n"
-"taldea erabiltzen du. Userdrake erabil dezakezu talde \n"
-"honetan erabiltzeak gehitzeko."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Ongi etorri Crackers-era"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Txikia"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estandarra"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Handia"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Handiagoa"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidea"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Maila hau kontuz erabili behar da. Sistema erabilerrazagoa izango da, baina\n"
-"oso erraz erasotzekoa: ez da erabili behar beste ordenagailu batzuekin edo \n"
-"Internetekin konektatuta dauden makinetan. Ez dago pasahitzik."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasahitzak gaituta daude orain, baina sareko ordenagailu gisa erabiltzea ez "
-"da komeni oraindik."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Hau da Internetera bezero gisa konektatzeko erabiliko diren "
-"ordenagailuentzat gomendatzen den segurtasun estandarra. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Murriztapen batzuk daude, eta egiaztapen automatiko gehiago gauero egiten "
-"dira."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Segurtasun-maila honekin, sistema hau erabil liteke zerbitzari gisa.\n"
-"Segurtasun hau nahikoa da sistema bezero askoren konexioak onartzen dituen \n"
-"zerbitzari gisa erabili ahal izateko. Oharra: zure makina Interneteko bezero "
-"soila bada, hobe duzu maila apalagoa."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Aurreko mailan oinarritua, baina sistema erabat itxita dago.\n"
-"Segurtasun-eginbideak maximoan jarrita daude."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Aukeratu segurtasun-maila"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Segurtasun-maila"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Erabili libsafe zerbitzarietarako"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Buffer-gainezkatzeen eta formatu-kateen erasoen aurka defendatzen duen "
-"liburutegi bat."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Ongi etorri %s sistema eragilearen aukeratzailera!\n"
-"\n"
-"Aukeratu sistema eragile bat goiko zerrendan edo\n"
-"itxaron %d segundo lehenetsitako abiorako.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Ongi etorri GRUB sistema eragilearen aukeratzailera!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Erabili %c eta %c teklak zein sarrera nabarmenduko den hautatzeko."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sakatu sartu hautatutako SE abiarazteko, 'e' abiarazi aurreko"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandoak editatzeko, edo 'c' komando-lerroa nahi baduzu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Nabarmendutako sarrera automatikoki abiaraziko da %d segundotan."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "ez dago nahiko leku /boot-en"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Mahaigaina"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Hasi menua"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Abioko kargatzailea ezin da %s partizio batean instalatu\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "oraindik ez da laguntzarik inplementatu.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Abioko estilo-konfigurazioa"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fitxategia"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fitxategia/I_rten"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle kategorizatze-monitorea"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle monitorea"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitore tradizionala"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Gtk+ monitore tradizionala"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Abiarazi Aurora abioan"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modua"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modua"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Orain %s erabiltzen ari zara Abioko Kudeatzaile gisa.\n"
-"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguratu"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistema modua"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Abiarazi X-Window sistema hasieran"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ez, ez dut saioa automatikoki hasi nahi"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Bai, automatikoki honekin hasi nahi dut (erabiltzailea, mahaigaina)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Ados"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ezin da ireki /etc/inittab irakurtzeko: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutu"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "minutu bat"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundo"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ezin da pantaila-argazkirik egin partizioak egin aurretik"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"%s(e)n instalazioa egindakoan pantaila-argazkiak erabilgarri egongo dira"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frantzia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgika"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Txekiar errepublika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemania"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grezia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvegia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suedia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Herbehereak"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Estatu Batuak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Egin zure datuen babeskopia lehendabizi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Irakurri arretaz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot erabiltzeko asmoa baduzu, utzi lekua (2048 sektore nahikoa da)\n"
-"diskoaren hasieran"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Errorea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Morroia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Aukeratu ekintza"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"FAT partizio handi bat duzu\n"
-"(normalean MicroSoft Dos/Windows-ek erabilia).\n"
-"Lehendabizi partizio horri tamaina aldatzea gomendatzen dizut\n"
-"(egin klik bertan, gero egin klik \"Aldatu tamaina\"n)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Egin klik partizio batean"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Xehetasunak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Hutsik"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Bestelakoa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Fitxategi-sistemen motak:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Sortu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Mota"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Erabili ``%s'' horren ordez"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Ezabatu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Erabili ``Desmuntatu'' lehendabizi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizio-mota aldatu ondoren, partizio honetako datu guztiak galdu egingo "
-"dira"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Aukeratu partizio bat"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Aukeratu beste partizio bat"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Irten"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Aldatu aditu modura"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Aldatu modu normalera"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Desegin"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jarraitu hala ere?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Irten gorde gabe"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Irten partizio-taula idatzi gabe?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "/etc/fstab aldaketak gorde nahi dituzu?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto-esleitu"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Garbitu dena"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Disko gogorraren informazioa"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Lehen mailako partizio guztiak erabilita daude"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ezin da partizio gehiago gehitu"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Partizio gehiago edukitzeko, ezabatu horietako bat partizio hedatu bat sortu "
-"ahal izateko"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Gorde partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Leheneratu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Berreskuratu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Birkargatu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Euskarri aldagarrien automuntatzea"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Hautatu fitxategia"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Babeskopiako partizio-taulak ez du tamaina bera\n"
-"Jarraitu hala ere?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Kontuz"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sartu diskete bat unitatean\n"
-"Disketeko datu guztiak galdu egingo dira"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Partizio-taula berreskuratzen saiatzen"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informazio xehea"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Muntatze-puntua"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Aukerak"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Aldatu tamaina"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Lekuz aldatu"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formateatu"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Muntatu"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Gehitu RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Gehitu LVMri"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmuntatu"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Kendu RAIDetik"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Kendu LVMtik"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Aldatu RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Erabili atzera-begiztarako"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Sortu partizio berria"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Hasierako sektorea: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamaina MBtan: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Fitxategi-sistemaren mota: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Muntatze-puntua: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Hobespena: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Atzera-begiztako fitxategia kendu?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Aldatu partizio-mota"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Zein fitxategi-sistema nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ext2tik ext3ra aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Non muntatu nahi duzu %s atzera-begiztako fitxategia?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Non muntatu nahi duzu %s gailua?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ezin da muntatze-puntuaren ezarpena kendu, partizio hau atzera-begiztarako "
-"erabiltzen delako\n"
-"Kendu atzera-begizta lehendabizi"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT fitxategi-sistemaren mugak kalkulatzen"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Tamaina aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Partizio honi ezin zaio tamaina aldatu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Partizio honetako datu guztiek babeskopia eduki beharko lukete"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizioa tamainaz aldatu ondoren, partizioko datu guztiak galdu egingo "
-"dira"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Aukeratu tamaina berria"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Tamaina berria MBtan: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Zein diskotara eraman nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektorea"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Zein sektoretara eraman nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Lekuz aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partizioa lekuz aldatzen..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Aukeratu lehendik dagoen RAID bat gehitzeko"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "berria"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Aukeratu lehendik dagoen LVM bat gehitzeko"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM izena?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Partizio hau ezin da atzera-begiztarako erabili"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Atzera-begizta"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Atzera-begiztako fitxategi-izena: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Eman fitxategi-izen bat"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Fitxategi hau beste atzera-begizta batek erabiltzen du, aukeratu beste bat"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fitxategia badago lehendik ere. Erabili?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Muntatze-aukerak"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Hainbat"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "gailua"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "maila"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "zatiaren tamaina"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Kontuz ibili: eragiketa hau arriskutsua da."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Nolako partizioa?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ezin dut onartu /boot hain urrun sortzea unitatean (zilindroa > 1024).\n"
-"Edo LILO erabiltzen duzu eta ez du funtzionatuko, edo ez duzu LILO "
-"erabiltzen eta ez duzu /boot erabili beharrik"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Erro gisa gehitzeko hautatu duzun partizioa (/) fisikoki disko gogorraren\n"
-"1024. zilindroaz haratago dago, eta ez duzu /boot partiziorik.\n"
-"LILO abioko kudeatzailea erabiltzeko asmoa baduzu, ez ahaztu /boot partizioa "
-"gehitzea"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Softwareko RAID partizio bat hautatu duzu erro gisa (/).\n"
-"Ez dago abioko kargatzailerik hori /boot partiziorik gabe erabil "
-"dezakeenik.\n"
-"Beraz, kontuan izan /boot partizioa gehitu behar duzula"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s unitatearen partizio-taula diskoan idatziko da!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Berrabiarazi egin beharko duzu aldaketek eragina izan dezaten"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizioa formateatu ondoren, partizioko datu guztiak galdu egingo dira"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "%s atzera-begiztako fitxategia formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s partizioa formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Ezkutatu fitxategiak"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Eraman fitxategiak partizio berrira"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-" %s direktorioak baditu datu batzuk\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Fitxategiak partizio berrira eramaten"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s kopiatzen"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s kentzen"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "%s partizioa %s da orain"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gailua: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS unitate-letra: %s (uste hutsa)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Mota: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Izena: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Hasi: %s sektorea\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "%d zilindrotik %d zilindrora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateatua\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Formateatu gabe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntatuta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Atzera-begiztako fitxategia(k):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Lehenespenez abiarazteko partizioa\n"
-"    (MS-DOS abiorako, ez lilo-rako)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "%s maila\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "%s zatiaren tamaina\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "%s RAID-diskoak\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Atzera-begiztako fitxategi-izena: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Partizio hau kontrolatzailearen \n"
-"partizioa izan daiteke, hobe duzu\n"
-"bere horretan uztea.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bootstrap partizio berezi hau\n"
-"sistemaren abio bikoitza\n"
-"egiteko da.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s zilindro, %s buru, %s sektore\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "%s LVM-diskoak\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partizio-taularen mota: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr " -  bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Aukerak: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Fitxategi-sistema enkriptatzeko gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Aukeratu fitxategi-sistema enkriptatzeko gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Enkriptatze-gako hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Enkriptatze-gakoak ez datoz bat"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Enkriptatze-gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Enkriptatze-gakoa (berriro)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Aldatu mota"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Egin klik euskarri batean"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Bilatu zerbitzarietan"
-
-# #this syntax doesn't work yet in perl :-(
-# #msgid "%s formatting of %s failed"
-# #msgstr "%2$s(r)i %1$s formatua emateak huts egin du"
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s %s(r)i formatua emateak huts egin du"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ez dakit nola formateatu %s %s motan"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "%s partizioa %s direktorioan muntatzeak huts egin du"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck-k huts egin du %d irteera-kodearekin edo %d seinalearekin"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "errorea %s desmuntatzean: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "sinplea"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr-rekin"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "zerbitzaria"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ezin da JFS erabili 16MB baino gutxiagoko partizioetarako"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ezin da ReiserFS erabili 32MB baino gutxiagoko partizioetarako"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Muntatzen-puntuek / batez hasi behar dute"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jadanik badago %s muntatze-puntua duen partizio bat\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ezin da LVM bolumen logikoa erabili %s muntatze-punturako"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Direktorio honek erroko fitxategi-sisteman egon behar du"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Egiazko fitxategi-sistema (ext2, reiserfs) behar duzu muntatze-puntu "
-"honetarako\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ezin da fitxategi-sistema enkriptatua erabili %s muntatze-punturako"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Ez dago nahikoa leku libre auto-esleitzeko"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ez dago zer eginik"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Errorea %s idazteko irekitzean: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Errorea gertatu da - ez da fitxategi-sistema berriak sortzeko gailu "
-"baliozkorik aurkitu. Aztertu zure hardwarea arazo honen arrazoia bilatzeko"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Ez duzu partiziorik!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux erabiltzaile anitzeko sistema da, hau da, erabiltzaile bakoitzak\n"
-"bere hobespenak eta bere fitxategiak eduki ditzake. Gehiago jakiteko\n"
-"``Erabiltzailearen gida'' irakurri. Baina administratzailea den \"root\"-ak\n"
-"ez bezala, hemen gehitutako erabiltzaileek debekatuta izango dute ezer\n"
-"aldatzea euren fitxategiak eta konfigurazioa izan ezik. Zuretzat gutxienez\n"
-"ohiko erabiltzaile bat sortu beharko duzu. Eta kontu horretan hasi beharko\n"
-"zenuke eguneroko saioa. Eguneroko saioa \"root\" gisa hastea oso\n"
-"erabilgarria den arren, oso arriskutsua ere izan daiteke! Hutsegiterik\n"
-"txikienak sistemak gehiago ez funtzionatzea eragin lezake. Ohiko\n"
-"erabiltzaile gisa hutsegite larri bat egiten baduzu, informazioren bat gal\n"
-"dezakezu, baina ez sistema osoa.\n"
-"\n"
-"Lehendabizi, zure benetako izena sartu beharko duzu. Hori ez da\n"
-"derrigorrezkoa noski - berez nahi duzuna sar dezakezu. DrakXk gero zuk\n"
-"laukian sartutako lehen hitza hartu eta \"Erabiltzaile-izena\" delakora\n"
-"eramango du. Hori izango da erabiltzaile jakin horrek sisteman saioa\n"
-"hasteko erabiliko duen izena. Alda dezakezu. Gero pasahitz bat sartu\n"
-"beharko duzu hemen. Erabiltzaile ez-pribilegiatuaren (arruntaren) pasahitza\n"
-"ez da \"root\"-arena bezain funtsezkoa segurtasunaren aldetik, baina ez da\n"
-"horregatik arduragabekeriaz jokatu behar - izan ere, zure fitxategiak\n"
-"baitaude arriskuan.\n"
-"\n"
-"\"Onartu erabiltzailea\"n klik eginez gero, nahi adina gehi ditzakezu.\n"
-"Gehitu erabiltzaile bat zure lagun bakoitzeko: zure aita edo ahizpa,\n"
-"adibidez. Nahi dituzun erabiltzaile guztiak gehitu ondoren, hautatu\n"
-"\"Eginda\".\n"
-"\n"
-"\"Aurreratua\" botoian klik eginez, erabiltzaile horren \"shell\"-a alda\n"
-"dezakezu (bash lehenespenez)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Goiko zerrendan zure disko gogorrean detektatutako Linux partizioak daude.\n"
-"Morroiak egindako aukerak manten ditzakezu, egokiak dira instalazio \n"
-"ohikoenetarako. Aldaketarik egiten baduzu, gutxienez erroko partizio bat\n"
-"definitu behar duzu (\"/\"). Ez aukeratu partizio txikiegirik edo ezin "
-"izango duzu\n"
-"nahikoa software instalatu. Datuak beste partizio batean biltegiratu\n"
-"nahi badituzu, \"/home\"rako partizio bat ere sortu beharko duzu\n"
-"(Linux partizio bat baino gehiago baduzu soilik da posible).\n"
-"\n"
-"Partizio bakoitza honela zerrendatzen da: \"Izena\", \"Edukiera\".\n"
-"\n"
-"\"Izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko "
-"gogorraren zenbakia\",\n"
-"\"partizio-zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\"Disko gogorraren mota\" \"hd\" da zure diskoa IDE disko gogorra bada eta\n"
-"\"sd\" SCSI disko gogorra bada.\n"
-"\n"
-"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\"ren ondoko letra bat "
-"izaten da. IDE\n"
-"disko gogorretan:\n"
-"\n"
-" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia \" esan nahi "
-"du,\n"
-"\n"
-" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi "
-"du,\n"
-"\n"
-" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-"\n"
-"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b"
-"\"letrak \"bigarren SCSI ID baxuena\", etab."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalazioa hainbat CD-ROMetan dago banatuta dago. DrakXk\n"
-"badaki hautatako pakete bat beste CD-ROM batean kokatuta dagoen edo ez, eta\n"
-"uneko CDa atera eta beste bat sartzeko eskatuko dizu behar ahala."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sisteman zein programa instalatu nahi dituzun zehazteko garaia da. Milaka\n"
-"pakete daude Mandrake Linux-entzat erabilgarri, eta ez duzu denak buruz\n"
-"jakin beharrik.\n"
-"\n"
-"CD-ROMetik instalazio estandarra egin behar baduzu, lehendabizi Orain\n"
-"dituzun CDak zehazteko eskatuko zaizu,(Aditu moduan soilik). Egiaztatu CDen\n"
-"etiketak eta nabarmendu instalaziorako erabilgarri dituzun CDei dagozkien\n"
-"laukiak. Sakatu \"Ados\" jarraitzeko prest zaudenean.\n"
-"\n"
-"Paketeak zure ordenagailuaren erabilera zehatz bati dagozkion Taldeetan\n"
-"ordenatzen dira. Taldeak berak lau sekziotan sailkatzen dira:\n"
-"\n"
-" * \"Lan-estazioa\": zure ordenagailua lan-estazio gisa erabiltzeko asmoa\n"
-"baduzu, hautatu talde bat edo gehiago.\n"
-"\n"
-" * \"Garapena\": ordenagailua programatzeko erabili behar baduzu, aukeratu\n"
-"nahi d(it)uzun taldea(k).\n"
-"\n"
-" * \"Zerbitzaria\": ordenagailua zerbitzari izateko erabili nahi baduzu,\n"
-"bertan instalatu nahi dituzun zerbitzurik ohikoenak hautatu ahal izango\n"
-"dituzu.\n"
-"\n"
-" * \"Ingurune grafikoa\": azkenik, hemen hautatuko duzu zure ingurune\n"
-"grafiko gogokoena. Gutxienez bat hautatu behar duzu, lan-estazio grafikoa\n"
-"eduki nahi baduzu!\n"
-"\n"
-"Saguaren kurtsorea talde-izen baten gainean mugituz, talde horri buruzko\n"
-"azalpen-testu labur bat bistaratuko da.\n"
-"\n"
-"\"Pakete indibidualen hautapena\" laukia hauta dezakezu. Lauki hori oso\n"
-"erabilgarri izango zaizu eskaintzen diren paketeak ezagutzen badituzu, edo\n"
-"instalatutako dena erabat kontrolatu nahi baduzu.\n"
-"\n"
-"Instalazioa \"Eguneratu\" moduan hasi baduzu, talde guztia desauta dezakezu\n"
-"beste paketerik instala ez dadin. Hori erabilgarria da lehendik dagoen\n"
-"sistema bat konpontzeko edo eguneratzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Azkenik, pakete indibidualak hautatu ala ez aukeraren arabera, taldetan eta\n"
-"azpitaldetan sailkatutako pakete guztiak dituen zuhaitz bat aurkeztuko\n"
-"zaizu. Zuhaitza arakatzen duzun bitartean, talde osoak, azpitaldeak nahiz\n"
-"pakete indibidualak hautatu ahal izango dituzu.\n"
-"\n"
-"Pakete bat zuhaitzean hautatzen duzun bakoitzean, azalpen bat agertuko da\n"
-"eskuinean. Hautaketa amaitutakoan, egin klik \"Instalatu\" botoian, eta\n"
-"instalazio-prozesua abiaraziko du. Zure hardwarearen abiaduraren arabera\n"
-"eta instalatu behar diren paketeen kopuruaren arabera, denbora-tarte bat\n"
-"beharko da prozesua burutzeko. Erabat burutzeko denboraren estimazioa\n"
-"bistaratzen da pantailan, kafetxo bat hartzeko denbora nahikorik ote duzun\n"
-"jakin dezazun.\n"
-"\n"
-"!! Zerbitzari-pakete bat hautatu baduzu, nahita edo talde oso baten zati\n"
-"zelako, zerbitzari horiek benetan instalatu nahi dituzun berresteko\n"
-"eskatuko zaizu. Mandrake Linux-en barruan, instalatutako edozein zerbitzari\n"
-"lehenetsitako moduan hasieratzen da. Seguruak diren arren eta banaketa\n"
-"argitaratu zen unean arazorik sortu ez bazuten ere, gerta liteke\n"
-"segurtasun-hutsuneak aurkitzea Mandrake Linux-en bertsio hau bukatu\n"
-"ondoren. Zerbitzu jakin batek zer egin behar duen edo zergatik instalatzen\n"
-"den ez badakizu, hautatu \"Ez\". \"Bai\" sakatzean zerrendatutako\n"
-"zerbitzuak instalatuko dira, eta lehenespen gisa automatikoki abiaraziko\n"
-"dira. !!\n"
-"\n"
-"\"Mendekotasun automatikoak\" aukerak Abisua elkarrizketa-koadroa\n"
-"desgaitzen du instalatzaileak pakete bat hautatzen duen bakoitzean. Hori\n"
-"gertatzen da instalazioa ongi burutzeko behar den beste pakete batekiko\n"
-"mendekotasuna erabaki duelako.\n"
-"\n"
-"Zerrendaren beheko aldean dagoen disketearen ikono txikiak aurreko\n"
-"instalazio batean aukeratutako pakete-zerrenda kargatzea ahalbidetzen du.\n"
-"Ikono horretan klik egitean, beste instalazio baten bukaeran aurrez\n"
-"sortutako diskete bat sartzeko eskatuko zaizu. Ikus diskete hori sortzeko\n"
-"moduari buruzko azken urratsaren bigarren iradokizuna."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Zure ordenagailua Internetera edo sare lokal batera konektatu nahi baduzu,\n"
-"egin aukera zuzena. Aktibatu zure gailua aukera zuzena hautatu aurretik\n"
-"DrakXk automatikoki detekta dezan.\n"
-"\n"
-"Mandrake Linux-ek instalazioa egitean Interneteko konexio bat konfiguratzea\n"
-"proposatzen du. Erabilgarri dauden konexioak: modem tradizionala, ISDN\n"
-"modema, ADSL konexioa, kable-modema, eta azkenik, LAN konexio soila\n"
-"(Ethernet).\n"
-"\n"
-"Hemen ez dugu konfigurazio bakoitza zehaztuko. Ziurtatu Interneteko\n"
-"zerbitzu-hornitzailearen edo sistema-administratzailearen parametro guztiak\n"
-"dituzula.\n"
-"\n"
-"Eskuliburuan Interneteko konexioei buruzko kapitulua kontsulta dezakezu\n"
-"konfigurazioaren xehetasunak ezagutzeko, edo bestela, sistema instalatu\n"
-"arte itxaron, eta zure konexioa konfiguratzeko bertan deskribatzen zaizun\n"
-"programa erabili.\n"
-"\n"
-"Sarea geroago, instalazioa egin ondoren, konfiguratu nahi baduzu, edo\n"
-"sare-konexioa konfiguratzen bukatu baduzu, sakatu \"Utzi\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Orain abiarazteko orduan zein zerbitzu abiaraztea nahi duzun aukera\n"
-"dezakezu.\n"
-"\n"
-"Hemen uneko instalazioarekin erabilgarri dauden zerbitzu guztiak ageri\n"
-"dira. Berrikusi arretaz eta kendu hautatze-marka abiaraztean beti behar ez\n"
-"direnei.\n"
-"\n"
-"Zerbitzu jakin bat hautatuz, zerbitzu horri buruzko azalpen-testu labur bat\n"
-"eskuratuko duzu. Hala ere, zerbitzu bat erabilgarria den ala ez ziur ez\n"
-"bazaude, seguruagoa da jokabide lehenetsia uztea.\n"
-"\n"
-"Etapa honetan, kontuz ibili zure ordenagailua zerbitzari gisa erabiltzeko\n"
-"asmoa baduzu: ziur aski ez duzu nahi izango behar ez duzun zerbitzurik\n"
-"abiaraztea. Gogoan izan zerbitzu batzuk arriskutsuak izan daitezkeela\n"
-"zerbitzari batean gaitzen badira. Oro har, benetan behar dituzun zerbitzuak\n"
-"soilik hautatu."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux-ek GMT (Greenwich Mean Time) ordua erabiltzen du eta tokian\n"
-"tokiko ordura aldatzen du, hautatutako ordu-zonaren arabera. Desaktibatu\n"
-"nahi baduzu, desautatu \"Hardwarearen ordua GMTn ezarria\" eta hardwarearen\n"
-"ordua eta sistemaren ordua berdinak izango dira. Erosoa da makinan beste\n"
-"sistema eragile bat dagoenerako, esate baterako, Windows.\n"
-"\n"
-"\" Ordu-sinkronizazio automatikoa\" aukerak automatikoki doituko du "
-"erlojua \n"
-"Interneteko urruneko ordu-zerbitzari batekin konektatuz. Aukera ezazu\n"
-"zuregandik hurbil dagoen zerbitzari bat. Eginbide hau erabili ahal izateko \n"
-"Interneteko konexioa beharko duzu, noski. Zure makinan ordu-zerbitzari bat\n"
-"instalatuko du eta zure sare lokaleko beste makina batzuetatik ere erabili \n"
-"ahal izango duzu, nahi izanez gero."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (X Window sistema) GNU/Linux-en interfaze grafikoaren bihotza da, eta\n"
-"Mandrake Linux-en dauden ingurune grafiko guztiak (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) horren araberakoak dira. Atal honetan, DrakX X automatikoki\n"
-"konfiguratzen saiatuko da.\n"
-"\n"
-"Oso gutxitan huts egiten du, baldin eta hardwarea ez bada oso zaharra (edo\n"
-"oso berria). Ongi badoa, X automatikoki abiaraziko du ahalik eta\n"
-"bereizmenik onenarekin, monitorearen tamainaren arabera. Orduan leiho bat\n"
-"agertuko da eta ikus dezakezun galdetuko dizu.\n"
-"\n"
-"\"Aditu\" instalazio bat egiten ari bazara, X konfigurazioaren morroia\n"
-"sartuko duzu. Ikus eskuliburuan dagokion atala morroi honi buruzko\n"
-"informazio gehiago lortzeko.\n"
-"\n"
-"Menua ikus badezakezu eta \"Bai\" erantzun baduzu, DrakX hurrengo urratsera\n"
-"joango da. Mezua ikusi ezin baduzu, konfigurazioa okerra dela esan nahi du\n"
-"horrek, eta proba automatikoki bukatuko da 10 segundo igarota; pantaila\n"
-"leheneratu egingo da."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"X konfigurazioa probatzen duzun lehen aldian, baliteke oso pozik ez\n"
-"geratzea ikusten denarekin (pantaila txikiegia, ezkerrera edo eskuinera\n"
-"mugitua...). Beraz, X zuzen abiarazten bada ere DrakXk gero konfigurazioa\n"
-"zuretzat egokia den galdetuko dizu. Aldatzea ere proposatuko dizu aurki\n"
-"ditzakeen baliozko moduen zerrenda bistaratuz eta bat hautatzeko eskatuz.\n"
-"\n"
-"Azken baliabide gisa, oraindik Xk funtzionatzea lortu ez baduzu, aukeratu\n"
-"\"Aldatu txartel grafikoak\", hautatu \"Zerrendatu gabeko txartela\", eta\n"
-"zein zerbitzari nahi duzun galdetzean, aukeratu \"FBDev\". Hau aukera\n"
-"segurua da, edozein txartel grafiko modernorekin funtzionatzen duena. Gero,\n"
-"aukeratu \"Probatu berriro\" ziur egoteko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Azkenik, interfaze grafikoa abiaraztean ikusi nahi duzun galdetuko zaizu.\n"
-"Kontuan eduki galdera hori konfigurazioa ez probatzea aukeratu baduzu ere\n"
-"egingo zaizula. Jakina, \"Ez\" erantzun nahi izango duzu zure ordenagailuak\n"
-"zerbitzari gisa jokatu behar badu, edo bistaratzea konfiguratuta edukitzea\n"
-"lortzen ez baduzu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux-en CD-ROMak Berreskuratu modu inkorporatua dauka. Hiru\n"
-"modutan eskura dezakezu: CD-ROMetik abiaraziz, abioan >>F1<< tekla sakatuz\n"
-"eta, gonbitean, >>berreskuratu<< idatziz. Baina zure ordenagailua\n"
-"CD-ROMetik abiarazi ezin bada, urrats hau erabili beharko zenuke bi egoera\n"
-"hauetan gutxienez:\n"
-"\n"
-" * abioko kargatzailea instalatzean, DrakXk zure disko nagusiko abioko\n"
-"sektorea berridatziko du (MBR) (baldin eta ez bazara beste abioko\n"
-"kudeatzaile bat erabiltzen ari), beraz Windows-ekin nahiz GNU/Linux-ekin\n"
-"(zure sisteman Windows baduzu) has zaitezke. Windows atzera berriz\n"
-"instalatu behar baduzu, Microsoft-en instalazio-prozesuak abioko sektorean\n"
-"gainidatziko du eta ezin izango duzu GNU/Linux abiarazi!\n"
-"\n"
-" * arazoren bat sortzen bada eta GNU/Linux disko gogorretik abiarazi ezin\n"
-"baduzu, diskete hau izango da GNU/Linux abiarazteko bide bakarra. Sistema\n"
-"leheneratzeko makina bat sistema-tresna ditu, eta oso erabilgarria da\n"
-"sistemak huts egiten duenean, argindarra joan delako, idazketa-akats bat\n"
-"egin delako, pasahitzean akats tipografiko bat egin delako edo beste\n"
-"zerbait gertatu delako.\n"
-"\n"
-"Urrats honetan klik egitean, unitatean disko bat sartzeko eskatuko zaizu.\n"
-"Sartzen duzun disketeak hutsik egon behar du, edo behar ez dituzun datuak\n"
-"eduki behar ditu. Ez duzu formateatu beharrik DrakXk disko osoa\n"
-"berridatziko baitu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Hona iritsita, Mandrake Linux sistema eragilea disko gogorrean non\n"
-"instalatu aukeratu beharko duzu. Disko gogorra hutsik badago edo lehendik\n"
-"dagoen sistema eragile batek leku erabilgarri guztia betetzen badu,\n"
-"partizioa egin beharko duzu. Funtsean, disko gogorrean partizioa egitea\n"
-"diskoa logikoki zatitzea da, Mandrake Linux sistema berria instalatzeko\n"
-"lekua sortzeko.\n"
-"\n"
-"Partizio-prozesuaren ondorioak itzulbiderik gabekoak izan ohi direnez,\n"
-"partizioa egitea korapilatsua eta deserosoa izan daiteke esperientziarik\n"
-"gabeko erabiltzailea bazara. Zorionez, badago prozesu hau errazten duen\n"
-"morroi bat. Hasi baino lehen, kontsultatu eskuliburua eta hartu behar duzun\n"
-"denbora.\n"
-"\n"
-"Instalazioa Aditu moduan exekutatzen baduzu, Mandrake Linux-en\n"
-"partizio-tresna den DiskDrake sartuko duzu, partizioak doitzea ahalbidetuko\n"
-"baitizu. Ikusi eskuliburuko DiskDrake-ren atala. Instalazioaren\n"
-"interfazetik, morroiak hemen deskribatu bezala erabil ditzakezu,\n"
-"elkarrizketako \"Morroia\" botoian klik eginez.\n"
-"\n"
-"Partizioak jadanik definitu badira, lehendik dagoen instalazio batetik\n"
-"nahiz beste partizio-tresna batetik, hautatu zure Linux sistema\n"
-"instalatzekoak.\n"
-"\n"
-"Partizioak definitu ez badira, morroia erabiliz sortu beharko dituzu. Disko\n"
-"gogorraren konfigurazioaren arabera, hainbat aukera daude erabilgarri:\n"
-"\n"
-" * \"Leku librea erabili\": aukera honek unitate huts(ar)en partizio\n"
-"automatikoa ekarriko du. Ez zaizu beste galderarik egingo.\n"
-"\n"
-" * \"Lehendik dagoen partizioa erabili\": morroiak lehendik dagoen Linux\n"
-"partizio bat edo gehiago detektatu du disko gogorrean. Erabili nahi\n"
-"badituzu, hautatu aukera hau.\n"
-"\n"
-" * \"Erabili Windows-en partizio leku librea \": zure disko gogorrean\n"
-"Microsoft Windows instalatuta badago eta bertako leku erabilgarri guztia\n"
-"betetzen badu, lekua libratu beharko duzu Linux-en datuentzat. Horretarako,\n"
-"Microsoft Windows-en partizioa eta datuak ezaba ditzakezu (ikus \"Ezabatu\n"
-"disko osoa\" edo \"Aditu modua\"ren irtenbideak) edo Microsoft Windows-en\n"
-"partizioaren tamaina aldatu. Tamaina-aldaketa daturik galdu gabe egin\n"
-"daiteke. Irtenbide hau da gomendagarriena zure ordenagailuan Mandrake Linux\n"
-"eta Microsoft Windows erabili nahi badituzu.\n"
-"\n"
-"   Aukera hau egin baino lehen, kontuan eduki prozedura honen ondoren\n"
-"Microsoft Windows-en partizioa orain baino txikiagoa izango dela. Leku\n"
-"gutxiago izango duzu, beraz, Microsoft Windows-eko datuak gordetzeko edo\n"
-"software berria instalatzeko.\n"
-"\n"
-" * \"Ezabatu disko osoa\": disko gogorreko datu eta partizio guztiak "
-"ezabatu\n"
-"eta Mandrake Linux sistema berriaz ordeztu nahi badituzu, aukeratu hau.\n"
-"Kontuz ibili irtenbide honekin, ezin izango baituzu aukeran atzera egin\n"
-"berretsi ondoren.\n"
-"\n"
-"   !! Aukera hau egiten baduzu, diskoko datu guztiak galdu egingo dira. !!\n"
-"\n"
-" * \"Kendu leihoak\": honek unitateko guztia ezabatuko du eta berriro "
-"hasiko\n"
-"da, denean hasieratik partizioa eginez. Diskoko datu Guztiak galdu egingo\n"
-"dira.\n"
-"\n"
-"   !! Aukera hau egiten baduzu, diskoko datu guztiak galduko dira. !!\n"
-"\n"
-" * \"Aditu modua\": hautatu aukera hau zure disko gogorrean partizioa eskuz\n"
-"egin nahi baduzu. Kontuz - aukera ahaltsua, baina arriskutsua da. Datu\n"
-"guztiak oso erraz gal ditzakezu. Beraz, ez aukeratu hau baldin eta ez\n"
-"badakizu zer egiten ari zaren."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Hortxe duzu. Instalazioa burutu da eta zure GNU/Linux sistema prest duzu\n"
-"erabiltzeko. Sakatu \"Ados\" sistema berrabiarazteko. GNU/Linux edo Windows\n"
-"abiaraz dezakezu, nahiago duzuna (abio bikoitza eginez gero), ordenagailua\n"
-"berrabiarazi bezain laster.\n"
-"\n"
-"\"Aurreratua\" botoiak (Aditu moduan bakarrik) beste bi botoi erakutsiko\n"
-"ditu:\n"
-"\n"
-" * \"auto-instalazioko disketea sortu\": eragile baten laguntzarik gabe\n"
-"oraintsu konfiguratu duzun instalazioaren moduko beste bat automatikoki\n"
-"burutuko duen instalazio-disketea sortzeko.\n"
-"\n"
-"   Kontuan eduki beste bi aukera daudela erabilgarri botoian klik egitean:\n"
-"\n"
-"    * \"Errepikatu\". Hau partzialki automatizatutako instalazioa da,\n"
-"partizio-urratsa (eta hau soilik) interaktibo geratzen denean.\n"
-"\n"
-"    * \"Automatizatua\". Erabat automatizatutako instalazioa: disko gogorra\n"
-"erabat berridazten da, eta datu guztiak galdu egingo dira.\n"
-"\n"
-"   Eginbide hau oso praktikoa da antzeko ordenagailu asko instalatzean. "
-"Ikus\n"
-"Auto instalazioa atala gure web gunean.\n"
-"\n"
-" * \"Gorde pakete-hautapena\"(*) : paketeen hautapena lehen bezala "
-"gordetzen\n"
-"du. Gero, beste instalazio bat egitean, sartu disketea kontrolatzailean eta\n"
-"exekutatu instalazioa [F1] tekla sakatuz eta >>linux defcfg=\"floppy\"<<\n"
-"bidaliz, laguntza- pantailara joanez.\n"
-"\n"
-"(*) FAT formatudun disketea behar duzu (GNU/Linux-en bat sortzeko, idatzi\n"
-"\"mformat a:\")"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Berriki definitutako edozein partizio bere erabilerarako formateatu behar\n"
-"da (formatua emateak fitxategi-sistema sortzea esan nahi du).\n"
-"\n"
-"Une honetan, baliteke lehendik dauden partizio batzuei berriro formatua\n"
-"eman nahi izatea dauzkaten datuak ezabatzeko. Hori egin nahi baduzu,\n"
-"partizio horiek ere hautatu.\n"
-"\n"
-"Kontuan hartu ez dela beharrezkoa lehendik dauden partizioei formatua\n"
-"ematea. Sistema eragilea daukaten partizioei eman behar diezu formatua\n"
-"(esaterako \"/\", \"/usr\" edo \"/var\"), baina ez mantendu nahi dituzun\n"
-"datuak dituztenei (normalki, \"/home\").\n"
-"\n"
-"Kontuz ibili partizioak hautatzean. Formateatu ondoren, hautatutako\n"
-"partizioetako datu guztiak ezabatu egingo dira eta ezin izango duzu bat ere\n"
-"berreskuratu.\n"
-"\n"
-"Sakatu \"Ados\" partizioak formateatzeko prest zaudenean.\n"
-"\n"
-"Sakatu \"Utzi\" Mandrake Linux sistema eragile berriaren instalaziorako\n"
-"beste partizio bat aukeratu nahi baduzu.\n"
-"\n"
-"Sakatu \"Aurreratua\" diskoko bloke okerretarako egiaztatuko diren\n"
-"partizioak hautatzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Mandrake Linux sistema eragile berria instalatzen ari zara orain. Zenbat\n"
-"pakete instalatu nahi dituzun eta zure ordenagailuak zein abiadura duen,\n"
-"eragiketa honek minutu batzuk edo denbora-tarte handi samarra beharko\n"
-"izango du.\n"
-"\n"
-"Pazientzia izan."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Mandrake Linux instalatzen duzunean, litekeena da pakete batzuk aldatu\n"
-"izana hasierako argitalpenetik. Beharbada akats batzuk konponduko ziren, \n"
-"eta segurtasun-arazoak gaindituko ziren. Eguneratzeez baliatu ahal izan\n"
-"zaitezen, Internetik deskargatzea gomendatzen dizugu.\n"
-"AUkeratu \"Bai\" Interneteko konexioa martxan badaukazu, edo \"Ez\" pakete\n"
-"eguneratuak geroago instalatu nahi badituzu.\n"
-"\n"
-"\"Bai\" aukeratzen baduzu, eguneratzeak eskaintzen dituzten lekuen "
-"zerrenda \n"
-"azalduko da. Aukeratu zuregandik hurbilen dagoena. Paketeak hautatzeko \n"
-"zuhaitza agertuko da orduan: egin hautapena eta sakatu \"Instalatu\" "
-"hautatutako \n"
-"paketek hartu eta instalatzeko, edo \"Utzi\" abortatzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Aurrera jarraitu baino lehen lizentziaren baldintzak arretaz irakurri.\n"
-"Mandrake Linux banaketa osoari dagozkio eta baldintza guztiekin ados ez\n"
-"bazaude, egin klik \"Ezetsi\" botoian; horrela berehala amaituko da\n"
-"instalazioa. Instalazioarekin aurrera jarraitzeko, egin klik \"Ados\"\n"
-"botoian."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Honaino iritsita, ordenagailuarentzat nahi duzun segurtasun-maila\n"
-"aukeratzeko garaia da. Oro har, zenbat eta babesgabeago egon eta zenbat eta\n"
-"funtsezko datu gehiago eduki biltegiratuta, orduan eta segurtasun-maila\n"
-"handiagoa behar da. Segurtasun-maila handiagoa, ordea, erabiltzeko\n"
-"erraztasunaren kalterako izan ohi da. Ikus ``Erreferentziazko\n"
-"eskuliburua''ren MSEC atala maila horien esanahiari buruzko informazio\n"
-"gehiago lortzeko.\n"
-"\n"
-"Zer aukeratu ez badakizu, eutsi aukera lehenetsiari."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Orain, Mandrake Linux sistema instalatzeko zein partizio erabiliko \n"
-"d(ir)en aukeratu behar duzu. Partizioak jadanik definituta badaude, \n"
-"(GNU/Linux-en aurreko instalazio batek edo beste partizio-tresna batek "
-"definituta),\n"
-"lehendik dauden partizioak erabil ditzakezu. Bestela, disko gogorreko\n"
-"partizioak definitu behar dira.\n"
-"\n"
-"Partizioak sortzeko, lehendabizi disko gogor bat hautatu behar duzu. "
-"Partizioa egiteko\n"
-"diskoa hauta dezakezu, \"hda\" sakatuz lehen IDE unitaterako,\n"
-"\"hdb\" bigarrenerako, \"sda\" lehen SCSI unitaterako eta abar.\n"
-"\n"
-"Hautatutako disko gogorraren partizioa egiteko, aukera hauek erabil\n"
-"ditzakezu:\n"
-"    * \"Dena garbitu\": aukera honek hautatutako disko gogorreko partizio "
-"guztiak \n"
-"ezabatzen ditu.\n"
-"\n"
-"    * \"Auto-esleitu\": aukera honekin automatikoki sor ditzakezu Ext2 eta\n"
-"swap partizioak disko gogorreko leku librean.\n"
-"\n"
-"    * \"Gehiago\": eginbide gehiagotarako aukera ematen du:\n"
-"\n"
-"    * \"Gorde partizio-taula\": partizio-taula diskete batean gordetzen du. "
-"Baliagarria\n"
-"de geroago partizio-taula berreskuratzeko, behar izanez gero. Oso "
-"gomendagarria \n"
-"da urrats hau egitea.\n"
-"\n"
-"    * \"Leheneratu partizio-taula\": lehen gordetako partizio-taula\n"
-"disketetik berreskuratzeko erabil daiteke.\n"
-"\n"
-"    * \"Berreskuratu partizio-taula\": partizio-taula hondatuta badago,  \n"
-"berreskuratzen saia zaitezke aukera honen bidez. Kontuz ibili eta gogoan \n"
-"izan huts egin dezakeela.\n"
-"\n"
-"    * \"Birkargatu partizio-taula\": aldaketa guztiak desegin nahi badituzu "
-"eta \n"
-"hasierako partizio-taula kargatu nahi baduzu, aukera hau erabil dezakezu \n"
-"\n"
-"    * \"euskarri aldagarriak automuntatzea\": aukera hau desgaitzen baduzu,  "
-"euskarri \n"
-"aldagarriak (disketeak, CD-ROMak eta horrelakoak) eskuz muntatu eta \n"
-"desmuntatzera behartuko dituzu erabiltzaileak.\n"
-"\n"
-"    * \"Morroia\": erabili aukera hau disko gogorreko partizioa egiteko "
-"morroia\n"
-"erabili nahi baduzu. Partizioak egiten ongi ez badakizu, morroia erabiltzea\n"
-"gomendatzen dizugu.\n"
-"\n"
-"    * \"Desegin\": aukera hau aldaketak bertan behera uzteko erabil "
-"dezakezu.\n"
-"\n"
-"    * \"Eginda\": disko gogorrean partizioak egiten bukatutakoan, aldaketak\n"
-"berriro diskoan gordeko ditu.\n"
-"\n"
-"Oharra: edozein aukera eskura dezakezu teklatuaren bidez. Partizio batetik \n"
-"bestera joateko, [Tab] eta [Gora/Behera] geziak erabil ditzakezu.\n"
-"\n"
-"Partizio bat hautatuta dagoenean, aukera hauek dituzu:\n"
-"\n"
-" * Ktrl-c beste partizio bat sortzeko (partizio huts bat hautatuta "
-"dagoenean);\n"
-"\n"
-" * Ktrl-d partizio bat ezabatzeko;\n"
-"\n"
-" * Ktrl-m muntatze-puntua ezartzeko.\n"
-"\n"
-"Erabil daitezkeen fitxategi-sistema desberdinei buruzko informazioa nahi \n"
-" baduzu, irakurri 'Erreferentzia-eskuliburu'ko ext2fs kapitulua.\n"
-"\n"
-"PPC makina batean instalatu behar baduzu, gutxienez 1 MBko HFS \"bootstrap"
-"\"\n"
-"partizio txiki bat sortu nahi izango duzu, yaboot abioko kargatzaileak\n"
-"erabiliko duena. Partizioa zertxobait handiagoa egitea hautatzen baduzu, "
-"adibidez 50 MBkoa, leku egokia izan daiteke ordezko nukleo bat eta ramdisk \n"
-"imajinak biltegiratzeko emergentziazko abioa egin ahal izateko."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Microsoft Windows partizio bat baino gehiago detektatu da zure disko\n"
-"gogorrean. Aukeratu Mandrake Linux sistema eragile berria instalatzeko\n"
-"tamainaz aldatu nahi duzuna.\n"
-"\n"
-"Partizio bakoitza honela azaltzen da: \"Linux izena\", \"Windows izena\"\n"
-"\"Edukiera\".\n"
-"\n"
-"\"Linux izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko \n"
-"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\"Disko gogorraren mota\" \"hd\" da zure diskoa IDE disko gogorra bada eta\n"
-"\"sd\" SCSI disko gogorra bada.\n"
-"\n"
-"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\"ren ondoko letra bat \n"
-"izaten da. IDE disko gogorretan:\n"
-"\n"
-" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du,\n"
-"\n"
-"   * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi "
-"du,\n"
-"\n"
-" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
-"letrak \"bigarren SCSI ID baxuena\", etab.\n"
-"\"Windows izena\" Windows-en dagoen disko gogorraren letra da (lehen\n"
-"diskoak edo partizioak \"C:\" du izena)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Izan pazientzia. Eragiketa honek minutu batzuk beharko ditu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakXk lehenetsitako instalazioa (\"Gomendatua\") egin nahi duzun edo\n"
-"kontrol handiagoa eduki nahi duzun (\"Aditua\") jakin behar du orain.\n"
-"Gainera, instalazio berri bat egiteko edo lehendik dagoen Mandrake Linux\n"
-"sistema eguneratzeko aukera izango duzu. \"Instalatu\" sakatzen baduzu,\n"
-"sistema zaharra erabat garbituko da. Hautatu \"Bertsio-berritu\" lehendik\n"
-"dagoen sistema baten bertsioa berritzen edo konpontzen ari bazara.\n"
-"\n"
-"Aukeratu \"Instalatu\" Mandrake Linux-en beste bertsiorik ez badago edo\n"
-"hainbat sistema-eragileren artean abiarazi nahi baduzu.\n"
-"\n"
-"Aukeratu \"Eguneratu\" Mandrake Linux-en jadanik instalatutako bertsio bat\n"
-"eguneratu edo konpondu nahi baduzu.\n"
-"\n"
-"GNU/Linux-i buruz dakizunaren arabera, aukeratu ondoko hauetako bat\n"
-"Mandrake Linux sistema eragilea instalatzeko edo eguneratzeko:\n"
-"\n"
-" * Gomendatua: aukeratu hau GNU/Linux sistema eragilea inoiz instalatu ez\n"
-"baduzu. Instalazioa oso erraza izango da eta galdera batzuk besterik ez\n"
-"zaizkizu egingo.\n"
-"\n"
-" * Aditua: GNU/Linux ongi ezagutzen baduzu, instalazio-mota hau aukera\n"
-"dezakezu. Instalazio adituak oso instalazio pertsonalizatua egiteko aukera\n"
-"emango dizu. Galdera batzuei erantzutea zaila izan daiteke GNU/Linux ongi\n"
-"ezagutzen ez baduzu, beraz ez aukeratu hau baldin eta zer egiten ari zaren\n"
-"ez badakizu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalki, DrakXk teklatu egokia hautatzen dizu (aukeratutako hizkuntzaren\n"
-"arabera) eta urrats hau ez duzu ikusi ere egingo. Dena den, baliteke zure\n"
-"hizkuntzari zehazki dagokion teklatua ez edukitzea: adibidez, ingelesez\n"
-"dakien suitzarra bazara, baliteke hala ere Suitzako teklatua nahi izatea.\n"
-"Edo ingeles hiztuna bazara baina Quebec-en bazaude, egoera berean egon\n"
-"zintezke. Bi kasuetan, instalazio-urrats honetan atzera jo eta teklatu\n"
-"egokia hautatu beharko duzu zerrendan.\n"
-"\n"
-"Egin klik \"Gehiago\" botoian onartzen diren teklatuen zerrenda osoa\n"
-"ikusteko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Aukeratu instalaziorako eta sistemaren erabilerarako hizkuntzarik\n"
-"gogokoena.\n"
-"\n"
-"\"Aurreratua\" botoian klik egiten baduzu, instalaziorako beste hizkuntza\n"
-"batzuk aukeratu ahal izango dituzu lan-estazioan. Beste hizkuntza bat\n"
-"hautatzean, sistemaren dokumentaziorako eta aplikazioetarako fitxategi\n"
-"espezifikoak instalatuko dira. Adibidez, zure ordenagailuan Espainiako\n"
-"erabiltzaileei ostatu eman behar badiezu, zuhaitz-ikuspegian hautatu\n"
-"euskara hizkuntza nagusi gisa, eta Aurreratua atalean, egin klik\n"
-"\"espainiera|Espainia\"ri dagokion izar grisean.\n"
-"\n"
-"Kontuan hartu hizkuntza bat baino gehiago instala daitezkeela. Lokal\n"
-"gehigarriak aukeratutakoan, egin klik \"Ados\" botoian jarraitzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Lehenespenez, DrakXk bi botoiko Sagua duzula suposatuko du, eta hirugarren\n"
-"botoia emula dezan konfiguratuko du. DrakXk automatikoki jakingo du sagua\n"
-"PS/2, seriekoa edo USB motakoa den.\n"
-"\n"
-"Beste mota bateko sagua zehaztu nahi baduzu, hautatu dagokion mota\n"
-"zerrendan.\n"
-"\n"
-"Lehenetsitakoa ez den sagu bat aukeratzen baduzu, sagua egiaztatzeko\n"
-"pantailan agertuko zaizu. Erabili botoiak eta gurpila ezarpenak egokiak\n"
-"direla egiaztatzeko. Saguak ez badu behar bezala funtzionatzen, sakatu\n"
-"zuriune-barra edo ITZULI \"Uzteko\", eta aukeratu berriro."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Hautatu ataka zuzena. Adibidez, MS Windows-eko \"COM1\" atakak\n"
-"\"ttyS0\"du izena GNU/Linux-en."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Hau da erabakigunerik funtsezkoena GNU/Linux sistemaren Segurtasunerako:\n"
-"\"root\"-aren pasahitza sartu duzu. \"root\" sistema-administratzailea da\n"
-"eta berak bakarrik dauka eguneratzeko, erabiltzaileak gehitzeko, sistemaren\n"
-"konfigurazio orokorra aldatzeko eta abar egiteko baimena. Bi hitzetan,\n"
-"\"root\"-ak dena egin dezake! Horregatik, asmatzen zaila den pasahitza\n"
-"aukeratu behar duzu - DrakXk errazegia den esango dizu. Ikus dezakezunez,\n"
-"pasahitza ez sartzea ere aukera dezakezu, baina horrelakorik ez egiteko\n"
-"aholkua emango genizuke, arrazoi batengatik: ez pentsa GNU/Linux abiarazi\n"
-"duzulako zure beste sistema eragileek akatsik eduki ezin dutenik.\n"
-"\"root\"-ak muga guztiak gaindi ditzakeenez, eta partizioetan arduragabeki\n"
-"sartuz partizioetako datu guztiak nahi gabe ezaba ditzakeenez,\n"
-"garrantzitsua da \"root\" bilakatzea zaila izatea.\n"
-"\n"
-"Pasahitzak karaktere alfanumerikoen nahasketa izan behar du eta gutxienez 8\n"
-"karaktere izan behar ditu. Ez idatzi inoiz \"root\"-aren pasahitza -\n"
-"sistema errazegi konprometituko bailuke.\n"
-"\n"
-"Dena den, pasahitza ez egin luzeegia, ahalegin handirik gabe gogoratu behar\n"
-"duzulako.\n"
-"\n"
-"Pasahitza ez da idatzi ahala pantailan bistaratuko. Horregatik, pasahitza\n"
-"bi aldiz idatzi beharko duzu, akats tipografikoen aukera murrizteko. Akats\n"
-"tipografiko bera bi aldiz egiten baduzu, pasahitz \"oker\" hori erabili\n"
-"beharko da konektatzen zaren lehen aldian.\n"
-"\n"
-"Aditu moduan, NIS edo LDAP moduko autentifikazio-zerbitzari batekin\n"
-"konektatuko zaren galdetuko zaizu.\n"
-"\n"
-"Zure sareak autentifikaziorako LDAP (edo NIS) protokoloa erabiltzen badu,\n"
-"hautatu \"LDAP\" (edo \"NIS\") autentifikazio gisa. Ezagutzen ez baduzu,\n"
-"galdetu sareko administratzaileari.\n"
-"\n"
-"Zure ordenagailua administratutako ezein sareri konektatua ez badago,\n"
-"beharbada \"Fitxategi lokalak\" aukeratu nahi izango dituzu\n"
-"autentifikaziorako."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO eta GRUB GNU/Linux-en abioko kargatzaileak dira. Etapa hau,normalean,\n"
-"erabat automatizatuta egoten da. Izan ere, DrakXk diskoaren abioko sektorea\n"
-"aztertu eta horren arabera jokatzen baitu, hor aurkitutakoaren arabera:\n"
-"\n"
-" * Windows-en abioko sektorea aurkitzen bada, GRUB/LILO abioko sektore "
-"batez\n"
-"ordeztuko du. Beraz, GNU/Linux edo beste OS bat kargatu ahal izango duzu;\n"
-"\n"
-" * GRUB edo LILO abioko sektore bat aurkitzen bada, berriz ordeztuko du;\n"
-"\n"
-"Zalantzarik badago, DrakXk hainbat aukera duen elkarrizketa-koadroa\n"
-"bistaratuko du.\n"
-"\n"
-" * \"Erabili beharreko abioko kargatzailea\": hiru aukera dituzu:\n"
-"\n"
-"    * \"LILO menu grafikoarekin\": LILO bere interfaze grafikoarekin "
-"nahiago\n"
-"baduzu.\n"
-"\n"
-"    * \"GRUB\": GRUB nahiago baduzu (testu-menua).\n"
-"\n"
-"    * \"LILO testu-menuarekin\": LILO bere testu-menuaren interfazearekin\n"
-"nahiago baduzu.\n"
-"\n"
-" * \"Abioko gailua\": kasu gehienetan, ez duzu (\"/dev/hda\") lehenetsia\n"
-"aldatuko, baina nahiago baduzu, abioko kargatzailea bigarren unitate\n"
-"gogorrean (\"/dev/hdb\") edo diskete batean (\"/dev/fd0\")instala daiteke.\n"
-"\n"
-" * \"Atzeratu lehenetsitako irudia abiarazi baino lehen\": ordenagailua\n"
-"berrabiaraztean, hau da erabiltzaileari aukeratzeko emandako atzerapena -\n"
-"abioko kargatzailearen menuan lehenetsia ez den beste sarrera bat.\n"
-"\n"
-"!! Kontuan eduki abioko kargatzaile bat ez instalatzea aukeratzen baduzu\n"
-"(hemen \"Utzi\" hautatuz), Mandrake Linux sistema abiarazteko bide bat\n"
-"dagoela! Beraz, ziurtatu edozein aukera aldatu baino lehen zer egiten duzun\n"
-"badakizula. !!\n"
-"\n"
-"Elkarrizketa-koadro honetako \"Aurreratua\" botoian klik eginda aukera\n"
-"aurreratu ugari lortuko dituzu, erabiltzaile adituentzat erreserbatuak.\n"
-"\n"
-"Mandrake Linux-ek abioko bere kargatzailea instalatzen du, eta GNU/Linux\n"
-"edo zure sisteman duzun beste edozein sistema eragile abiarazteko aukera\n"
-"emango dizu.\n"
-"\n"
-"Ordenagailuan beste sistema eragile bat instalatuta baduzu, automatikoki\n"
-"gehituko zaio abioko menuari. Hemen, lehendik dauden aukerak optimizatzea\n"
-"hauta dezakezu. Lehendik dagoen sarrera batean klik bikoitza egitean, bere\n"
-"parametroak aldatu edo kendu egingo dituzu; \"Gehitu\"k beste sarrera bat\n"
-"sortzen du; eta \"Eginda\" instalazioaren hurrengo urratsera joaten da."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) eta grub abioko kargatzaileak dira: GNU/Linux edo \n"
-"ordenagailuan dagoen beste edozein sistema eragile abiaraz dezakete.\n"
-" Normalki, beste sistema eragile horiek ongi detektatzen eta instalatzen\n"
-"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi \n"
-"dezakezu. Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
-"\n"
-"Halaber, baliteke beste sistema eragile horietan inori sartzen utzi nahi ez\n"
-"izatea. Horretarako, sistema eragile horien sarrerak ezaba ditzakezu. Baina\n"
-"gero, abioko disko bat beharko duzu beste sistema eragile horiek abiarazteko!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux-ekin abiarazteko behar den informazioa non kokatu nahi duzun \n"
-"adierazi behar duzu.\n"
-"\n"
-"Zer egiten ari zaren oso ongi ez badakizu, aukeratu \"Unitateko lehen\n"
-"sektorea (MBR)\"."
-
-#: ../../help.pm_.c:729
-#, fuzzy
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Hemen zure ordenagailuaren inprimatzeko sistema hautatuko dugu. Beste\n"
-"SE batzuek bakarra eskainiko dute beharbada, baina Mandrake-k hiru \n"
-"eskaintzen ditu.\n"
-"\n"
-" * \"pdq\" - ``print, don't queue'' esan nahi du, hau da, 'inprimatu, ez "
-"egon\n"
-"ilaran'. Aukera egokia da inprimagailua zuzenean konektatuta baduzu, papera\n"
-"trabatzen denean ohartu nahi baduzu eta sareko inprimagailurik ez baduzu. "
-"Sareko oso kasu\n"
-"sinpleak maneiatuko ditu eta mantso samarra da sarerako. Aukeratu\n"
-"\"pdq\" GNU/Linux-eko zure lehen bidaia bada. Instalazioa egin\n"
-"ondoren aukerak aldatu nahi badituzu, exekutatu Mandrake-ren kontrol-"
-"zentroko\n"
-"PrinterDrake eta egin klik 'aditua' botoian.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'' oso ona da zure inprimagailu\n"
-"lokalean inprimatzeko eta baita munduaren beste aldean ere. Sinplea da eta \n"
-"\"lpd\" inprimatze-sistema zaharraren zerbitzari edo bezero gisa joka "
-"dezake,\n"
-"beraz bateragarria da lehenagoko sistemekin. Gauza asko egin ditzake,\n"
-"baina oinarrizko konfigurazioa \"pdq\" bezain erraza da. \"lpd\" zerbitzari "
-"bat\n"
-"emulatzeko behar baduzu, \"cups-lpd\" daemon-a aktibatu behar duzu. "
-"Inprimagailuaren\n"
-"aukerak hautatzeko edo inprimatzeko interfaze grafikoak ditu.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. Sistema honek\n"
-"besteek egin ditzaketen gauza bertsuak egin ditzake, baina Novell sarean\n"
-"muntatutako inprimagailuetan inprimatuko du, IPX protokoloa onartzen "
-"duelako,\n"
-"eta shell komandoetan zuzenean inprima dezakeelako. Novell behar baduzu "
-"edo \n"
-"hodirik erabili gabe komandoetan inprimatu behar baduzu, erabili lprNG.\n"
-"Bestela, hobe da CUPS, sareetan lan egiteko sinpleagoa eta hobea delako."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX orain zure ordenagailuan dagoen edozein IDE gailu detektatzen ari da.\n"
-"Zure sistemako PCI SCSI txartel bat edo gehiago ere eskaneatuko ditu. SCSI\n"
-"txartela aurkitzen badu, DrakXek automatikoki instalatuko du unitate\n"
-"egokia.\n"
-"\n"
-"Hardwarearen detekzioak batzuetan hardware-elementurik detektatuko ez\n"
-"duenez, DrakXk PCI SCSI txartelik ote dagoen berresteko eskatuko dizu.\n"
-"Sakatu \"Bai\" zure ordenagailuan SCSI txartela instalatuta dagoela\n"
-"badakizu. SCSI txartelen zerrenda bat aurkeztuko zaizu, bertan aukeratzeko.\n"
-"Sakatu \"Ez\" SCSI hardwarerik ez baduzu. Ziur ez bazaude, zure\n"
-"ordenagailuan detektatutako hardware-zerrenda ikus dezakezu \"Ikus\n"
-"hardwareari buruzko informazioa\" hautatuz eta \"Ados\" sakatuz. Aztertu\n"
-"hardware- zerrenda eta egin klik \"Ados\" botoian SCSI interfazearen\n"
-"galderara itzultzeko.\n"
-"\n"
-"Moldagailua eskuz zehaztu baduzu, DrakXk haren aukerak zehaztu nahi dituzun\n"
-"galdetuko dizu. Hardwareak hasieratzeko behar dituen aukera zehatzak bila\n"
-"ditzan, hardwarea aztertzen utzi beharko zenioke DrakXri. Horrek ondo\n"
-"funtzionatu ohi du.\n"
-"\n"
-"DrakXk pasatu behar diren aukerak egiaztatu ezin baditu, aukerak eskuz eman\n"
-"beharko dizkiozu kontrolatzaileari.Eskatutako parametroak\n"
-"frabrikatzailearen web orritik (Interneteko sarbidea baduzu) edo Microsoft\n"
-"Windows-etik (hardware hau zure sisteman Windows-ekin erabili baduzu)\n"
-"berreskuratzeko aholkuak lortzeko, ikus ``Erabiltzailearen gida '' (3.\n"
-"atala, \"Hardwareari buruzko informazioa biltzen\" sekzioa) ."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Sarrera gehiago erants ditzakezu yaboot-entzat, beste sistema eragile\n"
-"batzuk, nukleo alternatiboak edo emergentziazko abioko imajina gehitzeko.\n"
-"\n"
-"Beste SEentzat, etiketa eta erroko partizioa soilik da sarrera.\n"
-"\n"
-"Linux-entzat, hainbat aukera daude:\n"
-"\n"
-" * Etiketa: yaboot-en gonbitean idatzi beharko duzun izena da, abioko\n"
-"aukera hau hautatzeko.\n"
-"\n"
-" * Imajina: abiarazi beharreko nukleoaren izena izango litzateke. Normalki, "
-"vmlinux\n"
-"edo vmlinux-en aldaera bat, luzapen batekin.\n"
-"\n"
-" * Root: zure Linux instalazioaren \"root\" gailua edo \"/\" \n"
-"\n"
-" * Erantsi: Apple hardwarean, nukleoa eransteko aukera bideo-hardwarea "
-"hasieratzen\n"
-"laguntzeko erabiltzen da askotan, edo ohiko Apple saguetan gehienetan\n"
-"falta izaten diren 2. eta 3. botoien emulazioa gaitzeko teklatuan.\n"
-" Hona hemen adibide batzuk:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: aukera hau hasierako moduluak kargatzeko erabil daiteke, abioko\n"
-"gailua erabilgarri egon aurretik, edo ramdisk imajina bat kargatzeko \n"
-"emergentziazko abioa egin behar denean.\n"
-"\n"
-" * Initrd-tamaina: ramdisk-tamaina lehenetsia 4.096 bytekoa izan ohi da. "
-"Ramdisk\n"
-"handi bat esleitu behar baduzu, aukera hau erabil dezakezu.\n"
-"\n"
-" * Irakurri/idatzi: normalki \"root\" partizioa irakurtzeko soilik agertzen "
-"da hasieran,\n"
-"fitxategi-sistemak egiaztatu ahal izateko, sistema \"aktibo\" egin "
-"aurretik.\n"
-"Hemen, aukera hori gainidatz dezakezu.\n"
-"\n"
-" * BideorikEz: Apple bideoaren hardwarea bereziki problematikoa bada,\n"
-"aukera hau hauta dezakezu \"bideorikez\" moduan abiarazteko, jatorrizko\n"
-"frame buffer euskarriarekin.\n"
-"\n"
-" * Lehenetsia: sarrera hau hautatzen du Linux-en hautapen lehenetsi gisa,\n"
-"eta yaboot-en gonbitean SARTU sakatuz hauta daiteke. Sarrera hau\n"
-"\"*\" batez nabarmenduko da, [Tab] sakatzen baduzu abioko hautapenak\n"
-"ikusteko."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"NewWorld MacIntosh hardwarearentzako abioko kargatzaile bat da Yaboot. GNU/"
-"Linux, \n"
-"MacOS, edo MacOSX abiaraz dezake, ordenagailuan badago.\n"
-"Normalean,\n"
-"beste sistema eragile horiek ongi detektatzen eta instalatzen dira. Horrela "
-"ez bada,\n"
-"pantaila honetan sarrera bat eskuz gehi dezakezu. Kontuz ibili\n"
-"parametroak aukeratzean okerrik ez egiteko\n"
-"\n"
-"Yaboot-en aukera nagusiak hauek dira:\n"
-"\n"
-" * Hasierako mezua: abioko gonbitaren aurretik bistaratzen den mezu-testu\n"
-"laburra.\n"
-"\n"
-" * Abioko gailua: adierazi non kokatu nahi duzun GNU/Linux-ekin abiarazteko "
-"behar den\n"
-"informazioa. Normalean, bootstrap partizio bat konfiguratuko duzu lehenago\n"
-"informazio hau edukitzeko.\n"
-"\n"
-" * Open Firmware atzerapena: LILOrekin ez bezala, bi atzerapen daude "
-"erabilgarri\n"
-"yaboot-ekin. Lehen atzerapena segundotan neurtzen da, eta hemen CD, OF "
-"abioa\n"
-"MacOS edo Linux aukera dezakezu.\n"
-"\n"
-" * Nukleoaren abioaren denbora-muga: denbora-muga hau LILOren abioko "
-"atzerapenaren antzekoa da.\n"
-"Linux hautatu ondoren, 0,1 segundoko atzerapen hau izango duzu "
-"lehenetsitako\n"
-"nukleo-deskribapena hautatu aurretik.\n"
-"\n"
-" * Gaitu CDtik abiaraztea?: aukera hau hautatzen baduzu, \"C\" aukeratu ahal "
-"izango\n"
-"duzu CDarentzat abioko lehen gonbitean.\n"
-"\n"
-" * Gaitu OF abioa?: aukera hau hautatzen baduzu, \"N\" aukeratu ahal izango\n"
-"duzu Open Firmware-rentzat abioko lehen gonbitean.\n"
-"\n"
-" * SE lehenetsia: lehenespenez zein SE abiaraziko den hauta dezakezu Open\n"
-"Firmware Atzerapena igarotzen denean."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hemen zure ordenagailuari dagozkion parametroak aurkezten dira. Zein\n"
-"hardware instalatuta daukazun, ondoko sarrerak ikusiko dituzu - edo ez:\n"
-"\n"
-" * \"Sagua\": egiaztatu saguaren konfigurazioa eta, beharrezkoa bada, egin\n"
-"klik botoian aldatzeko.\n"
-"\n"
-" * \"Teklatua\": egiaztatu une honetako teklatuaren konfigurazioa eta,\n"
-"beharrezkoa bada, egin klik botoian aldatzeko.\n"
-"\n"
-" * \"Ordu-zona\": DrakXk, lehenespenez, aukeratutako hizkuntzatik asmatzen\n"
-"du zure ordu-zona. Baina teklatuaren aukerari dagokionez, baliteke\n"
-"aukeratutako hizkuntzari dagokion herrialdean ez egotea. Horregatik,\n"
-"\"Ordu-zona\" botoian klik egin beharko duzu ordularia zu zauden\n"
-"ordu-zonaren arabera konfiguratzeko.\n"
-"\n"
-" * \"Inprimagailua\": \"Inprimagailurik ez\" botoian klik eginez,\n"
-"inprimagailuaren konfigurazio-morroia irekiko da.\n"
-"\n"
-" * Zure sisteman \"Soinu-txartela\": soinu-txartela detektatzen bada, hemen\n"
-"bistaratuko da. Instalatzean ezin da aldaketarik egin.\n"
-"\n"
-" * \"telebista-txartela\": zure sisteman telebista-txartela detektatzen\n"
-"bada, hemen bistaratuko da. Instalatzean ezin da aldaketarik egin.\n"
-"\n"
-" * \"ISDN txartela\": zure sisteman ISDN txartela detektatzen bada, hemen\n"
-"bistaratuko da. Egin klik botoian dagozkion parametroak aldatzeko."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Aukeratu Mandrake Linux-en partizio berria instalatzeko ezabatu nahi duzun\n"
-"disko gogorra. Kontuz ibili, bertako datu guztiak galdu egingo dira eta "
-"ezin\n"
-"izango dira berreskuratu!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sakatu \"Ados\" disko gogor honetako datu eta partizio guztiak ezabatu \n"
-"nahi badituzu. Kontuz ibili, \"Ados\" sakatu ondoren, ezin izango duzu \n"
-"disko gogor honetako daturik eta partiziorik berreskuratu,\n"
-"Windows-eko datuak barne.\n"
-"\n"
-"Sakatu \"Utzi\" disko gogor honetako daturik eta partiziorik galdu gabe\n"
-"eragiketa hau bertan behera uzteko."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "%s ere formateatu behar duzu"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Zerbitzari hau(ek) hautatu d(it)uzu: %s\n"
-"\n"
-"\n"
-"Zerbitzari horiek lehenespenez aktibatzen dira. Ez dute segurtasun-arazo "
-"ezagunik,\n"
-"baina berriren bat ager liteke. Kasu horretan, ziurtatu ahal bezain laster\n"
-"eguneratzen duzula.\n"
-"\n"
-"\n"
-"Zerbitzari horiek benetan instalatu nahi dituzu?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ezin da difusioa erabili NIS domeinurik gabe"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sartu FAT formatuko diskete bat %s unitatean"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Diskete honek ez du FAT formaturik"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Gordetako pakete-hautapen hau erabiltzeko, abiarazi instalazioa ``linux "
-"defcfg=floppy''rekin"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Errorea %s fitxategia irakurtzean"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Zure ordenagailuko hardware batzuek kontrolatzaile ``jabea'' behar dute.\n"
-"Horiei buruzko informazioa hemen aurki dezakezu: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Erroko partizioa eduki behar duzu.\n"
-"Horretarako, sortu partizio bat (edo egin klik lehendik dagoen batean).\n"
-"Gero aukeratu ``Muntatze-puntua'' ekintza eta ezarri `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Swap partizio bat eduki behar duzu"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Ez duzu swap partiziorik\n"
-"\n"
-"Jarraitu hala ere?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "FAT partizio bat eduki behar duzu /boot/efi-n muntatuta"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Erabili leku librea"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ez dago partizio berriak esleitzeko adina leku"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Lehendik dagoen partizioa erabili"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ez dago erabiltzeko moduko partiziorik"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Erabili Windows partizioa atzera-begiztarako"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Zein partizio erabili nahi duzu Linux4Win-erako?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Aukeratu tamainak"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Erroko partizioaren tamaina MBtan: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap partizioaren tamaina MBtan: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Erabili Windows-en partizioko leku librea"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Zein partiziori aldatu nahi diozu tamaina?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Windows fitxategi-sistemaren mugak kalkulatzen"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT tamaina-aldatzaileak ezin du zure partizioa maneiatu, \n"
-"errore hau gertatu da: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Zure Windows partizioa fragmentatuegia dago, exekutatu ``defrag'' lehendabizi"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"KONTUZ!\n"
-"\n"
-"DrakX Windows partizioari tamaina aldatzera doa. Kontuz ibili:\n"
-"eragiketa hau arriskutsua da. Inoiz ez baduzu horrelakorik egin, \n"
-"hobe izango duzu instalaziotik irten eta scandisk exekutatzea \n"
-"Windows-en (eta nahi izanez gero defrag); gero, hasi berriro \n"
-"instalazioarekin. Datuen babeskopia egitea ere komeni da.\n"
-"Ziur zaudenean, sakatu Ados."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Zein tamaina utzi nahi duzu Windows-entzat"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "%s partizioan"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT tamaina-aldaketak huts egin du: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ez dago FAT partiziorik tamainaz aldatzeko edo atzera-begizta gisa "
-"erabiltzeko (edo ez dago nahikoa leku)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Ezabatu disko osoa"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Kendu Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Disko gogor bat baino gehiago duzu, zeinetan instalatuko duzu linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s unitatean dauden partizio eta datu GUZTIAK galdu egingo dira"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Disko-partizio pertsonalizatua"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Erabili fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Orain egin dezakezu %s partizioa.\n"
-"Egin ondoren, ez ahaztu `w' erabiliz gordetzea"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Ez duzu behar adina leku libre Windows partizioan"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ezin dut instalatzeko lekurik aurkitu"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Partizio-morroiak irtenbide hauek aurkitu ditu:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizioak huts egin du: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Sarea irekitzen"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Sarea ixten"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Errore bat gertatu da, baina ez dakit behar bezala maneiatzen.\n"
-"Jarraitu zure ardurapean."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Bikoiztu %s muntatze-puntua"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Pakete garrantzitsu batzuk ez dira behar bezala instalatu.\n"
-"Zure CDROM unitateak edo CDROMak akatsak ditu.\n"
-"Probatu CDROMa ordenagailu instalatu batean \"rpm -qpl Mandrake/RPMS/*.rpm\" "
-"erabiliz.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Ongi etorri %s(e)ra"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ez dago diskete-unitate erabilgarririk"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "`%s' urratsean sartzen\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sistemak baliabide gutxi ditu. Arazoak izan ditzakezu Mandrake \n"
-"Linux instalatzeko. Horrela bada, testu-instalazioa egiten saia zaitezke. "
-"Horretarako,\n"
-"sakatu `F1' CDROMetik abiaraztean, gero sartu `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalazio-klasea"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Aukeratu instalazio-klase hauetako bat:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Hautatu dituzun taldeen tamaina osoa %d MBkoa da gutxi gorabehera.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Tamaina hori baino gutxiago instalatu nahi,\n"
-"baduzu, hautatu instalatu nahi duzun pakete-portzentajea.\n"
-"\n"
-"Ehuneko txiki batekin pakete garrantzitsuenak soilik instalatuko dira;\n"
-"%% 100 aukeratzen baduzu, hautatutako pakete guztiak instalatuko ditu."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Pakete horien %% %d instalatzeko lekua besterik ez duzu diskoan.\n"
-"\n"
-"Hori baino gutxiago instalatu nahi baduzu,\n"
-"hautatu instalatu nahi duzun pakete-portzentajea.\n"
-"Ehuneko txiki batekin pakete garrantzitsuenak soilik instalatuko ditu;\n"
-"%% %d hautatzen baduzu, ahalik eta pakete gehien instalatuko ditu."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Hurrengo urratsean zehazkiago aukeratu ahal izango dituzu."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Instalatzeko pakete-ehunekoa"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakete-taldearen hautapena"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Pakete indibidualen hautapena"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Guztira: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakete txarra"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Izena: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Bertsioa: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Garrantzia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ezin duzu pakete hori hautatu: ez dago instalatzeko lekurik"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ondorengo pakete hauek instalatuko dira"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ondorengo pakete hauek kenduko dira"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ezin duzu pakete hau hautatu/desautatu"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Nahitaezko paketea da, ezin da desautatu"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ezin duzu pakete hau desautatu. Dagoeneko instalatuta dago"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Pakete hau bertsio-berritu beharrean dago\n"
-"Ziur zaude desautatu nahi duzula?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ezin duzu pakete hau desautatu. Bertsio-berritu egin behar da"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Erakutsi automatikoki hautatutako paketeak"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalatu"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Kargatu/Gorde disketean"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Pakete-hautapena eguneratzen"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Gutxieneko instalazioa"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Aukeratu instalatu nahi dituzun paketeak"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalatzen"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Kalkulatzen"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Geratzen den denbora "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Itxaron, instalazioa prestatzen"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketeak"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketea instalatzen"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Onartu"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Ezetsi"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Aldatu CDROMa!\n"
-"\n"
-"Sartu \"%s\" etiketa duen CDROMa unitatean eta sakatu Ados.\n"
-"Ez baduzu, sakatu Utzi instalazioa CDROM horretatik egin ez dezan."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Jarraitu hala ere?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Errore bat izan da paketeak ordenatzean:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Errore bat izan da paketeak instalatzean:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Abisua\n"
-"\n"
-"Irakurri arretaz ondorengo baldintzak. Zerbaitekin ados ez bazaude,\n"
-"ez duzu hurrengo CDa instalatzeko baimenik. Sakatu 'Ezetsi' \n"
-"instalazioa euskarri horiek erabili gabe jarraitzeko.\n"
-"\n"
-"\n"
-"Hurrengo CDko osagai batzuk ez dira GPL Lizentziaren edo\n"
-"antzeko akordioen araberakoak. Osagai horietako bakoitza\n"
-"bere lizentzia zehatzaren baldintzen araberakoa da. \n"
-"Irakurri arretaz lizentzia horiek eta bete bertako baldintzak osagai \n"
-"horiek erabili edo birbanatu aurretik. \n"
-"Lizentzia horiek oro har osagaia transferitzea, bikoiztea (babeskopiak\n"
-"egiteko izan ezik), birbanatzea, ingeniaritza alderantzikatzea, \n"
-"desmihiztatzea, deskonpilatzea edo aldatzea eragotziko dute. \n"
-"Kontratua ez betetzeak lizentzia zehatzak ematen dituen eskubide guztiak \n"
-"kentzea ekarriko du berehala. Baldin eta lizentzia zehatzaren baldintzek "
-"eskubidea ematen\n"
-"ez badizute, normalki ezin izango dituzu programak sistema batean baino\n"
-"gehiagotan instalatu, edo sarean erabiltzeko egokitu. Zalantzarik baduzu, "
-"jarri harremanetan\n"
-"osagaiaren banatzailearekin edo editorearekin zuzenean. \n"
-"Osagai horiek hirugarrenei transferitzea edo kopiatzea, dokumentazioa\n"
-"barne, debekatuta egoten da normalki.\n"
-"\n"
-"\n"
-"Hurrengo CDko osagaiei dagozkien eskubide guztiak haien egileenak \n"
-"dira eta software-programei aplikatzen zaizkien jabetza \n"
-"intelektualaren eta copyright-aren legeek babesten dituzte.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Errore bat izan da"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Ziur zaude instalazioa bertan behera utzi nahi duzula?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lizentzia-kontratua"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Sarrera\n"
-"\n"
-"Mandrake Linux banaketako sistema eragileari eta erabilgarri dauden osagaiei "
-"\"Software-produktuak\"\n"
-"deituko zaie aurrerantzean. Software-produktuetan sartzen dira, besteak \n"
-"beste, Mandrake Linux banaketako sistema eragileari eta osagaiei dagozkien "
-"programak, \n"
-"metodoak, arauak eta dokumentazioa.\n"
-"\n"
-"\n"
-"1. Lizentzia-kontratua\n"
-"\n"
-"Irakurri arretaz dokumentu hau. Dokumentu hau zure eta MandrakeSoft S.A.ren "
-"arteko lizentzia-kontratu bat da,\n"
-"Software-produktuei dagokiena.\n"
-"Software-produktuak instalatu, bikoiztu edo era batean edo bestean erabiliz, "
-"esplizituki \n"
-"onartzen dituzu eta erabateko adostasuna adierazten diezu Lizentzia honen "
-"baldintzei. \n"
-"Lizentziaren zatiren batekin ados ez bazaude, ez duzu baimenik izango "
-"Software-produktuak instalatu, \n"
-"bikoiztu edo erabiltzeko. \n"
-"Software-produktuak Lizentzia honekin bat ez datorren moduan instalatu, "
-"bikoiztu edo erabiltzeko \n"
-"saio oro deuseza izango da eta Lizentziari dagozkion eskubideak amaitu "
-"egingo \n"
-"dira. Lizentzia amaitzean, Software-produktuen kopia guztiak berehala "
-"suntsitu \n"
-"behar dituzu.\n"
-"\n"
-"\n"
-"2. Berme mugatua\n"
-"\n"
-"Software-produktuak eta erantsitako dokumentuak \"dauden-daudenean\" ematen "
-"dira, bermerik gabe, \n"
-"legeak onartzen duen neurrian.\n"
-"MandrakeSoft S.A.k ez du, ezein kasutan eta legeak onartzen duen neurrian, "
-"erantzukizunik izango\n"
-"Software-produktuen erabileraren edo erabiltzeko ezgaitasunaren ondorioz "
-"sortutako kalte berezi, ustekabeko,\n"
-"zuzeneko edo zeharkakoengatik (lana galtzea, lana etetea, finantza-galera, "
-"epai baten ondorioz ordaindu \n"
-"beharreko kuotak eta zigorrak edo beste edozein ondoriozko galera barne, "
-"mugarik gabe), \n"
-"MandrakeSoft S.A. jakinaren gainean egon arren halako kalteak gerta "
-"litezkeela.\n"
-"\n"
-"HERRIALDE BATZUETAN SOFTWARE DEBEKATUA EDUKITZEARI EDO ERABILTZEARI LOTUTAKO "
-"ERANTZUKIZUN MUGATUA\n"
-"\n"
-"Legeak onartzen duen neurrian, MandrakeSoft S.A.k edo bere banatzaileek, ez "
-"dute, ezein kasutan,\n"
-"erantzukizunik izango herrialde batzuetan, bertako legeek debekatutako edo "
-"mugatutako software-osagaiak edo\n"
-"Mandrake Linux-en guneetatik deskargatutako software-osagaiak eduki eta "
-"erabiltzearen ondorioz \n"
-"sortutako kalte berezi,ustekabeko,zuzeneko edo zeharkakoengatik (lana "
-"galtzea, lana etetea,\n"
-"finantza-galera, epai baten ondorioz ordaindu beharreko kuotak eta zigorrak "
-"edo beste edozein ondoriozko \n"
-"galera barne, mugarik gabe).\n"
-"Erantzukizun mugatu hau Software-produktuetan sartzen diren kriptografia "
-"handiko osagaiei aplikatzen \n"
-"zaie, baina ez da horietara mugatzen.\n"
-"\n"
-"\n"
-"3. GPL Lizentzia eta Lizentzia erlazionatuak\n"
-"\n"
-"Software-produktuak hainbat pertsonak edo erakundek sortutako osagaiak dira. "
-"Osagai \n"
-"horietako gehienak aurrerantzean\"GPL\" deituko diogun GNU Lizentzia Publiko "
-"Orokorraren\n"
-"edo antzeko lizentzien baldintzen araberakoak dira. Lizentzia horietako "
-"gehienek, \n"
-"beren osagaiak bikoizteko, egokitzeko edo birbanatzeko aukera ematen dute. "
-"Osagai bat erabili aurretik, irakurri \n"
-"arretaz osagai horren lizentzia-kontratuko baldintzak.  Osagaiaren "
-"lizentziari\n"
-"buruzko galdera oro osagaiaren egileari egin beharko zaio, eta ez "
-"MandrakeSoft-i.\n"
-"MandrakeSoft S.A.k garatutako programak GPL Lizentziaren araberakoak dira. "
-"MandrakeSoft S.A.k\n"
-"idatzitako dokumentazioa lizentzia zehatz baten araberakoa da. Xehetasun "
-"gehiago nahi izanez gero, \n"
-"jo dokumentaziora.\n"
-"\n"
-"\n"
-"4. Jabetza intelektualaren eskubideak\n"
-"\n"
-"Software-produktuen osagaiei dagozkien eskubide guztiak haien \n"
-"egileenak dira eta software-programei\n"
-"aplikatzen zaizkien jabetza intelektualaren eta copyriht-aren legeek "
-"babesten dituzte.\n"
-"MandrakeSoft S.A.k eskubidea du Software-produktuak bere osotasunean edo "
-"zatika aldatzeko, \n"
-"bide guztiak erabiliz eta helburu guztietarako.\n"
-"\"Mandrake\", \"Mandrake Linux\" eta asoziatutako logotipoak MandrakeSoft S."
-"A.ren marka erregistratuak dira  \n"
-"\n"
-"\n"
-"5. Lege arautzaileak \n"
-"\n"
-"Kontratu honen edozein zati epai batek deuseztzat, legez kanpokotzat edo "
-"aplikaezintzat jotzen badu, \n"
-"zati hori kendu egingo da kontratutik. Kontratuaren gainerako atal "
-"aplikagarriek ezarritakoa \n"
-"bete behar duzu.\n"
-"Lizentzia honetako baldintzak Frantziako legeen araberakoak dira.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teklatua"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Aukeratu zure teklatu-diseinua."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hona hemen teklatu erabilgarri guztien zerrenda"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Zein instalazio-klase nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalatu/Eguneratu"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Zer egin nahi duzu: instalazioa ala eguneratzea?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Gomendatua"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Aditua"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Bertsio-berritu"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Paketeak bakarrik bertsio-berritu"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Aukeratu sagu-mota."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Sagu-ataka"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Aukeratu sagua konektatuta dagoen serieko ataka."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Botoien emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "2. botoiaren emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "3. botoiaren emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA txartelak konfiguratzen..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE konfiguratzen"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ez dago partizio erabilgarririk"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Partizioak eskaneatzen muntatze-puntuak aurkitzeko"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Aukeratu muntatze-puntuak"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ezin dut zure partizio-taula irakurri, hondatuegia dago :(\n"
-"Jarraitzen saia naiteke, partizio txarrak garbituz (DATU GUZTIAK galduko "
-"dira!).\n"
-"Beste irtenbidea DrakXri partizio-taula aldatzeko baimenik ez ematea da.\n"
-"(errorea %s da)\n"
-"\n"
-"Ados zaude partizio guztiak galtzearekin?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake-k ezin izan du partizio-taula behar bezala irakurri.\n"
-"Jarraitu zure ardurapean!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Ez dago lekurik 1 MBko bootstrap-a sortzeko! Instalazioak jarraituko du, "
-"baina zure sistema abiarazteko, bootstrap partizioa sortu beharko duzu "
-"DiskDrake-rekin"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ez da erroko partiziorik aurkitu bertsio-berritzea egiteko"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Erroko partizioa"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Zein da zure sistemaren (/) erroko partizioa?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Berrabiarazi egin behar duzu partizio-taulako aldaketek eragina izateko"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Aukeratu formateatu nahi dituzun partizioak"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Bloke txarrak egiaztatu?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partizioak formateatzen"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s fitxategia sortzen eta formateatzen"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ez dago nahikoa swap instalazioa burutzeko, gehitu egin beharko duzu"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Pakete erabilgarriak bilatzen"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Bertsio-berritzeko paketeak bilatzen"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Zure sistemak ez du nahikoa leku instalatzeko edo bertsio-berritzeko (%d > %"
-"d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Osoa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Gutxienekoa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Gomendatua (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Aukeratu pakete-hautapena disketean kargatzea edo gordetzea.\n"
-"Formatua instalazio automatikoa egiteko sortutako disketeena bezalakoa da."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Disketetik kargatu"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Disketetik kargatzen"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakete-hautapena"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Sartu pakete-hautapena daukan diskete bat"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gorde disketean"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Hautatutako tamaina handiagoa da leku erabilgarria baino"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Instalazio-mota"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Ez duzu talde edo paketerik hautatuta\n"
-"Nahi duzun gutxieneko instalazioa hautatu behar duzu"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Xrekin"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Oinarrizko dokumentazioarekin (gomendatua)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instalazio minimo-minimoa (batez ere, urpmi gabe)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Beheko zerrendako CD guztiak badituzu, sakatu Ados.\n"
-"CD horietako bat ere ez baduzu, sakatu Utzi.\n"
-"CDetako batzuk soilik falta badituzu, desauta itzazu, eta sakatu Ados."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" etiketadun CDROMa"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Instalazioa prestatzen"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketea instalatzen\n"
-"%% %d"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Instalazio-ondorengo konfigurazioa"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sartu abioko disketea %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sartu moduluak eguneratzeko disketea %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Enkriptatzeko softwarea deskargatzeko aukera duzu orain.\n"
-"\n"
-"ABISUA:\n"
-"\n"
-"Software horiei aplika dakizkiekeen eta hainbat jurisdikziok ezartzen "
-"dituzten eskakizun \n"
-"orokor desberdinak direla eta, software horien bezeroek edo/eta azken "
-"erabiltzaileek \n"
-"segurtatu beharko dute beren jurisdikzioko legeek baimena ematen dutela "
-"softwareok \n"
-"deskargatzeko, biltegiratzeko edo/eta erabiltzeko.\n"
-"\n"
-"Gainera, bezeroek edo/eta azken erabiltzaileek bereziki arduratu behar dute "
-"beren\n"
-"jurisdikzioko legeak ez urratzeaz. Bezeroek edo/eta azken erabiltzaileek\n"
-"lege aplikagarri horiek xedatutakoa betetzen ez badute, zigor handiak "
-"jasoko\n"
-"dituzte.\n"
-"\n"
-"Ezein kasutan, Mandrakesoft-ek eta bere fabrikatzaileek edo/eta banatzaileek "
-"ez dute\n"
-"erantzukizunik izango bezeroak edo/eta azken erabiltzaileak kontratu hau\n"
-"sinatu ondoren eskuratutako softwareak erabiltzearen, edukitzearen edo \n"
-"deskargatze hutsaren ondorioz sortutako kalte berezi, zeharkako edo "
-"ustekabekoengatik \n"
-"(hala nola, irabaziak galtzea, lana etetea, datu komertzialak galtzea\n"
-"eta bestelako diru-galerak eta epai baten erabakiari jarraiki ordaindu\n"
-"beharreko erantzukizunak eta kalte-ordainak, besteak beste).\n"
-"\n"
-"\n"
-"Kontratu honi buruzko edozein kontsulta egiteko, jarri harremanetan\n"
-"Mandrakesoft, Inc.-ekin\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Banaketa erabilgarri izan ondoren kaleratutako pakete eguneratuak\n"
-"deskargatzeko aukera duzu.\n"
-"\n"
-"Segurtasun eta akatsen konponketak hartuko dituzu, baina Interneteko\n"
-"konexio bat behar duzu konfiguratuta, aurrera jarraitzeko.\n"
-"\n"
-"Eguneratze horiek instalatu nahi dituzu?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Mandrake Linux-en web gunearekin kontaktatzen ispiluen zerrenda lortzeko"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Aukeratu ispilu bat paketeak bertatik hartzeko"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ispiluarekin kontaktatzen pakete erabilgarrien zerrenda lortzeko"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Zein da zure ordu-zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarearen ordua GMTn ezarria"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Ordu-sinkronizazio automatikoa (NTP erabiliz)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Urruneko CUPS zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Inprimagailurik ez"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "ISA soinu-txartela duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Instalazioa egindakoan, exekutatu \"sndconfig\" soinu-txartela "
-"konfiguratzeko "
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Ez da soinu-txartelik detektatu. Instalazioa egin ondoren, saiatu \"harddrake"
-"\"rekin "
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Laburpena"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Sagua"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Ordu-zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Inprimagailua"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN txartela"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Soinu-txartela"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Telebista-txartela"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fitxategi lokalak"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ezarri root-aren pasahitza"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Pasahitzik ez"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Pasahitz hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP basea dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domeinua"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
-"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman SILO\n"
-"instalatu nahi ez baduzu, edo beste sistema eragile batek SILO kentzen badu, "
-"edo SILOk\n"
-"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
-"pertsonalizatua Mandrake\n"
-"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
-"larriak\n"
-"errazago gainditu ahal izateko.\n"
-"\n"
-"Zure sistemarako abioko disko bat sortu nahi baduzu, sartu diskete bat "
-"lehen\n"
-"unitatean eta sakatu \"Ados\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Lehen diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Bigarren diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Saltatu"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
-"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman LILO "
-"(edo grub)\n"
-"instalatu nahi ez baduzu, edo beste sistema eragile batek LILO kentzen badu, "
-"edo LILOk\n"
-"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
-"pertsonalizatua Mandrake\n"
-"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
-"larriak\n"
-"errazago gainditu ahal izateko.\n"
-"Zure sistemarako abioko disko bat sortu nahi duzu?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(KONTUZ! XFS erabiltzen ari zara erroko partizioan,\n"
-"abioko diskoa 1,44 Mb-ko disketean sortzeak huts egingo du\n"
-"seguru asko, XFSk oso kontrolatzaile handia behar duelako)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ez dago diskete-unitate erabilgarririk"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Aukeratu abioko diskoa egiteko erabili nahi duzun diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sartu diskete bat %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Abioko disketea sortzen"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Abioko kargatzailea prestatzen"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Badirudi makina zaharra edo ezezaguna duzula,\n"
-"yaboot abioko kargatzaileak ez du funtzionatuko.\n"
-"Instalazioak jarraitu egingo du, baina\n"
-"BootX erabili beharko duzu makina abiarazteko"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot erabili nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Errorea aboot instalatzean, \n"
-"instalazioa ezartzen saiatu lehen partizioa suntsitzen badu ere?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Abioko kargatzailea instalatzen"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Abioko kargatzailea instalatzeak huts egin du. Errore hau gertatu da:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Baliteke Open Firmware abioko gailua aldatu behar izatea\n"
-" abioko kargatzailea gaitzeko.  Berrabiaraztean abioko kargatzailearen "
-"gonbita ez\n"
-" baduzu ikusten, eduki sakatuta Command-Option-O-F abiaraztean eta sartu:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Gero, idatzi: shut-down\n"
-"Hurrengo abiaraztean abioko kargatzailearen gonbita ikusi behar duzu."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sartu diskete huts bat %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Auto-instalazioko disketea sortzen"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Urrats batzuk ez dira osatu.\n"
-"\n"
-"Ziur zaude orain irten nahi duzula?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Zorionak, instalazioa burutu da.\n"
-"Atera abioko diskoa eta sakatu itzulera-tekla berrabiarazteko.\n"
-"\n"
-"\n"
-"Mandrake Linux-en bertsio honetarako erabilgarri dauden konponbideen "
-"informaziorako,\n"
-"kontsultatu Erratak helbide honetan:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/.\n"
-"\n"
-"\n"
-"Zure sistema konfiguratzeko informazioa Mandrake-ren Erabiltzailearen \n"
-"Gida Ofizialeko instalatu ondorengo azalpenei buruzko kapituluan duzu."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Sortu auto-instalazioko disketea"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto-instalazioa erabat automatiza daiteke nahi izanez gero,\n"
-"kasu horretan, disko gogorra hartuko du!!\n"
-"(beste makina batean instalatzeko pentsatua da aukera hau).\n"
-"\n"
-"Beharbada nahiago izango duzu instalazioa errepikatzea.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizatua"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Errepikatu"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gorde pakete-hautapena"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux-en %s instalazioa"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> elementuz aldatzeko  | <Zuriunea> hautatzeko | <F12> hurr. "
-"pantaila"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu falta da"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper falta da"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Aukeratu fitxategi bat"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Aurreratua"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Oinarrizkoa"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Itxaron"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informazioa"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Zabaldu zuhaitza"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Tolestu zuhaitza"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Txandakatu alfabetikoaren eta taldeka ordenatuaren artean"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Aukera okerra, saiatu berriro\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Zure aukera? (%s lehenetsia) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Zuk bete beharreko sarrerak:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Zure aukera? (0/1, lehenetsia `%s' da) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "`%s' botoia : %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Botoi honetan klik egin nahi duzu?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Zure aukera? (lehenetsia: `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hainbat gauza dituzu aukeran (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Aukeratu editatu nahi duzun 10 barrutiko lehen zenbakia,\n"
-"edo sakatu Sartu, jarraitzeko.\n"
-"Zure aukera? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Kontuz, etiketa bat aldatu da:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Berriro bidali"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "txekiarra (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "alemana"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "espainiarra"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "finlandiarra"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "frantsesa"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norvegiarra"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "poloniarra"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "errusiarra"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "suediarra"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Erresuma Batuko teklatua"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estatu Batuetako teklatua"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "albaniarra"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "armeniarra (zaharra)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "armeniarra (idazmakina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "armeniarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerbaijandarra (latinoa)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belgikarra"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "bulgariarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "bulgariarra (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brasildarra (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "bielorrusiarra"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "suitzarra (diseinu alemana)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "suitzarra (diseinu frantsesa)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "txekiarra (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "alemana (letra zaharkiturik ez)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "daniarra"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (Estatu Batuak)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norvegiarra)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (suediarra)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "estoniarra"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "georgiarra (diseinu \"errusiarra\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "georgiarra (diseinu \"latinoa\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "grekoa"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "hungariarra"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "kroaziarra"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "israeldarra"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "israeldarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "iraniarra"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "islandiarra"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "italiarra"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japoniarra 106 tekla"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreako teklatua"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latinamerikarra"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituaniako AZERTY (zaharra)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituaniako AZERTY (berria)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniako QWERTY \"ilara numerikoa\""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniako QWERTY \"fonetikoa\""
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "letoniarra"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "mazedoniarra"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "holandarra"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "poloniarra (qwerty diseinua)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "poloniarra (qwertz diseinua)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugesa"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "kanadarra (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "errumaniarra (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "errumaniarra (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "errusiarra (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "esloveniarra"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "eslovakiarra (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "eslovakiarra (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "serbiarra (zirilikoa)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "tamila"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailandiako teklatua"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajikistango teklatua"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turkiarra (tradizionala \"F\" modeloa)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turkiarra (modernoa \"Q\" modeloa)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukrainarra"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estatu Batuetako teklatua (nazioartekoa)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietnamdarra QWERTY \"ilara numerikoa\""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "jugoslaviarra (latinoa)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Eskuineko Alt tekla"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Bi Maius teklak batera"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol eta Maius teklak batera"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "BlokMaius tekla"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ktrl eta Alt teklak batera"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt eta Maius teklak batera"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Menu\" tekla"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Ezkerreko \"Windows\" tekla"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Eskuineko \"Windows\" tekla"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "%s muntaketa zirkularrak\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Kendu bolumen logikoak lehendabizi\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA euskarririk ez dago 2.2 nukleoentzat. Erabili 2.4 nukleoa."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Sagua"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Gurpildun PS2 sagu generikoa"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking sagua"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botoi"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "2 botoiko sagu generikoa"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generikoa"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Gurpila"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriekoa"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "3 botoiko sagu generikoa"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech sagua (seriekoa, C7 mota zaharrekoa)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus-sagua"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botoi"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botoi"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "bat ere ez"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Sagurik gabe"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Probatu sagua"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Sagua aktibatzeko,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MUGITU GURPILA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Amaitu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Hurrengoa ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Aurrekoa"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Zuzena da?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektatu Internetekin"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"adsl-rekin konektatzeko modurik ohikoena pppoe da.\n"
-"Konexio batzuek pptp erabiltzen dute, bakan batzuek dhcp.\n"
-"Ez badakizu, aukeratu 'erabili pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "erabili dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "erabili pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "erabili pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Zein dhcp bezero erabili nahi duzu?\n"
-"Lehenetsia dhcpcd da"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Zure sisteman ez da ethernet sare-moldagailurik detektatu.\n"
-"Ezin dut konexio-mota hau konfiguratu."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Aukeratu sare-interfazea"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Aukeratu zein sare-moldagailu erabili nahi duzun Internetera konektatzeko"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ez da sare-txartelik aurkitu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Sarea konfiguratzen"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Sartu zure ostalari-izena, baldin badakizu.\n"
-"DHCP zerbitzari batzuek ostalari-izena behar dute funtzionatzeko.\n"
-"Ostalari-izenak osoa izan behar du, erabat kualifikatua,\n"
-"esate baterako, ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ostalari-izena"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Sarea konfiguratzeko morroia"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Kanpoko ISDN modema"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Barneko ISDN txartela"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Nolakoa da zure ISDN konexioa?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Zein ISDN konfigurazio duzu nahiago?\n"
-"\n"
-"* Konfigurazio zaharrak isdn4net erabiltzen du. Tresna ahaltsuak\n"
-"  dauzka, baina korapilatsua da konfiguratzeko, eta ez da estandarra.\n"
-"\n"
-"* Konfigurazio berria errazagoa da ulertzeko, estandarragoa,\n"
-"  baina tresna gutxiago ditu.\n"
-"\n"
-"Konfigurazio erraza gomendatzen dugu.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurazio berria (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurazio zaharra (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfigurazioa"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Hautatu hornitzailea.\n"
-" Zerrendan ez badago, aukeratu Zerrendatu gabe"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europako protokoloa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europako protokoloa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Munduko gainerako protokoloa"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Munduko gainerako protokoloa \n"
-" D kanalik ez (linea alokatuak)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Zein protokolo erabili nahi duzu?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Nolako txartela duzu?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ez dakit"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ISA txartela baduzu, hurrengo pantailako balioek zuzenak izan behar dute.\n"
-"\n"
-"PCMCIA txartela baduzu, txartelaren irq eta io jakin behar dituzu.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortatu"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Jarraitu"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Zein da zure ISDN txartela?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI txartel bat detektatu dut, baina ez dakit zein motatakoa den. "
-"Hautatu PCI txartel bat hurrengo pantailan."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ez da ISDN PCI txartelik aurkitu. Hautatu bat hurrengo pantailan."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Aukeratu modema konektatuta dagoen serieko ataka."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Telefonoz deitzeko aukerak"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Konexio-izena"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefono-zenbakia"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Saio-hasierako ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-ean oinarritua"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalean oinarritua"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeinu-izena:"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Lehen DNS zerbitzaria (aukerakoa)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Bigarren DNS zerbitzaria (aukerakoa)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Deskonektatu egin zaitezke edo konexioa birkonfiguratu."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Konexioa birkonfigura dezakezu."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Orain Internetekin konektatuta zaude."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Internetekin konekta zaitezke, edo konexioa birkonfiguratu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Orain ez zaude Internetekin konektatuta."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektatu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Deskonektatu"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfiguratu konexioa"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interneteko konexioa eta konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "%s konexioa konfiguratuko dugu orain."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"%s konexioa konfiguratuko dugu orain.\n"
-"\n"
-"\n"
-"Jarraitzeko, sakatu Ados."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Sare-konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Sare-instalazioa egiten ari zarenez, zure sarea konfiguratuta dago jadanik.\n"
-"Hautatu Ados zure konfigurazioa mantentzeko, edo hautatu Utzi Internet eta "
-"Sare-konexioa birkonfiguratzeko.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Ongi etorri Sarea konfiguratzeko morroira\n"
-"\n"
-"Zure Internet/sare-konexioa konfiguratzera goaz.\n"
-"Ez baduzu auto-detekzioa erabili nahi, desautatu kontrol-laukia.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Aukeratu konfiguratzeko profila"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Erabili auto-detekzioa"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Gailuak detektatzen..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Modem-konexio normala"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s atakan detektatua"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konexioa"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s detektatua"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konexioa"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s interfazean detektatua"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kable-konexioa"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "kable bidezko konexioa detektatu da"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Sare lokaleko konexioa (LAN)"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet txartela(k) detektatuta"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Aukeratu konfiguratu nahi duzun konexioa"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Internetera konektatzeko modu bat baino gehiago konfiguratu duzu.\n"
-"Aukeratu erabili nahi duzuna.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Interneteko konexioa"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Abioan hasi nahi duzu konexioa?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Sare-konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Sarea berrabiarazi egin behar da"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Arazo bat izan da sarea berrabiaraztean: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Zorionak, sarearen eta Interneten konfigurazioa amaitu da.\n"
-"\n"
-"Konfigurazioa zure sistemari aplikatuko zaio orain.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Ondoren, zure X ingurunea berrabiaraztea gomendatzen dugu,\n"
-"ostalari-izena aldatzearen arazoa saihesteko."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Arazoak izan dira konfigurazioan zehar.\n"
-"Probatu konexioa net_monitor edo mcc bidez. Konexioak funtzionatzen ez badu, "
-"konfigurazioa berrabiarazi beharko duzu"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ABISUA: Gailu hau Internetera konektatzeko konfiguratu da aldez aurretik.\n"
-"Gailu hau konfiguratuta mantentzeko, onartu, besterik gabe.\n"
-"Ondoko eremuak aldatzen badituzu konfigurazio hau gainidatziko da."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Sartu makina honen IP konfigurazioa.\n"
-"Elementu bakoitza IP helbide gisa sartu behar da puntuz\n"
-"bereizitako zenbakizko notazioan (adibidez, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Sareko %s gailua konfiguratzen"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s kontrolatzailea)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP helbidea"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Sare-maskara"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automatikoa"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP helbideak 1.2.3.4 formatua izan behar du"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Sartu zure ostalari-izena.\n"
-"Ostalari-izenak osoa izan behar du, erabat kualifikatua,\n"
-"esate baterako, ``mybox.mylab.myco.com''.\n"
-"Atebidearen IP helbidea ere sar dezakezu, baldin baduzu"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS zerbitzaria"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Atebidea (adib. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Atebide-gailua"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy-en konfigurazioa"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy-a"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy-a"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Sare-txartelaren identifikazioa (eramangarrientzat baliagarria)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy-ak http://... izan behar du"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ak ftp://... izan behar du"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneteko konfigurazioa"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Internetera orain konektatu nahi duzu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Konexioa probatzen..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistema Internetera konektatuta dago orain."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Segurtasun-arrazoiengatik, deskonektatu egingo da orain."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Badirudi sistema ez dagoela Internetera konektatuta.\n"
-"Saiatu konexioa birkonfiguratzen."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konexioaren konfigurazioa"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Bete edo egiaztatu ondoko eremua"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Txartelaren IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Txartelaren mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Txartelaren S/I"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Txartelaren S/I_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Txartelaren S/I_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Zure telefono-zenbakia"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Hornitzailearen izena (adib. hornitzailea.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Hornitzailearen telefono-zenbakia"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Hornitzailearen dns 1 (aukerakoa)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Hornitzailearen dns 2 (aukerakoa)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Aukeratu zure herrialdea edo estatua"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Markatzeko modua"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Konexioaren abiadura"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Konexioaren denbora-muga (segundotan)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kontuaren identifikatzailea (erabiltzaile-izena)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Kontuaren pasahitza"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "muntatzeak huts egin du: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partizio hedatua ez da plataforma honetan onartzen"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hutsune bat duzu partizio-taulan baina ezin dut erabili.\n"
-"Irtenbide bakarra lehen mailako partizioak mugitzea da, hutsunea partizio "
-"hedatuen ondoren gera dadin"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Huts egin du %s fitxategitik leheneratzean: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Babeskopia txarra"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Errorea %s fitxategian idaztean"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Okerren bat gertatzen ari da zure unitatean. \n"
-"Datuen osotasuna egiaztatzeko probak huts egin du. \n"
-"Horrek esan nahi du, diskoan ezer idazten bada, zaborra sortuko dela ausaz"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ezinbestekoa"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "garrantzitsua"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "oso baliagarria"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "baliagarria"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "beharbada"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR  Belaunaldi berrikoa"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Inprimatu, ez egon ilaran)"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Inprimagailu lokala"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Urruneko inprimagailua"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Urruneko CUPS zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Urruneko lpd zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Sareko inprimagailua (TCP/socket-a)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "NetWare zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Adierazi inprimagailuaren URI bat"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Kanalizatu lana komando batean"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modelo ezezaguna"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Inprimagailu lokalak"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Urruneko inprimagailuak"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " - \\/*%s ataka paraleloan"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", \\/*%s USB inprimagailua"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", funtzio anitzeko gailua \\/*%s ataka paraleloan"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", funtzio anitzeko gailua - USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", funtzio anitzeko gailua - HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", funtzio anitzeko gailua"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", %s(e)n inprimatzean"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr " - \"%s\" LPD zerbitzaria, \"%s\" inprimagailua"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", \"%s\" TCP/IP ostalaria, %s ataka"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr " - \"%s\" Windows zerbitzaria, \"%s\" konpartitzea"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr " - \"%s\" Novell zerbitzaria, \"%s\" inprimagailua"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", %s komandoaren bidez"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Inprimagailu gordina (kontrolatzailerik ez)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(makina honetan)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "\"%s\" CUPS zerbitzarian"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (lehenetsia)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Hautatu inprimagailu-konexioa"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Nola dago konektatuta inprimagailua?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Urruneko CUPS zerbitzariko inprimagailuak ez dituzu hemen konfiguratu behar; "
-"horrelako inprimagailuak automatikoki detektatuko dira."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPSen konfigurazioa"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Zehaztu CUPS zerbitzaria"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Sare lokaleko urruneko CUPS zerbitzarietarako sarbidea izateko, ez daukazu "
-"ezer konfiguratu beharrik; CUPS zerbitzariek automatikoki emango diote zure "
-"makinari beren inprimagailuen berri. Zure makinak ezagutzen dituen "
-"inprimagailu guztiak Printerdrake-ren leiho nagusiko \"Urruneko "
-"inprimagailuak\" ataleko zerrendan daude. CUPS zerbitzaria zure sarelokalean "
-"ez badago, CUPS zerbitzariaren IP helbidea eman behar duzu, eta nahi baduzu "
-"atakaren zenbakia, zerbitzaritik inprimagailuaren informazioa eskuratzeko; "
-"bestela, utzi eremu hauek hutsik."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalean, CUPS automatikoki konfiguratzen da sare-ingurunearen\n"
-"arabera, sare lokaleko CUPS zerbitzarietako inprimagailuetara\n"
-"iritsi ahal izan zaitezen. Horrek ez badu ondo funtzionatzen, \n"
-"desaktibatu \"CUPS konfigurazio automatikoa\" eta editatu\n"
-"/etc/cups/cupsd.conf fitxategia eskuz. Ez ahaztu gero CUPS\n"
-"berrabiaraztea (komandoa: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP helbideak honelako itxura izan behar du: 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Ataka-zenbakiak osoko zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS zerbitzariaren IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ataka"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CUPS konfigurazio automatikoa"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Gailuak detektatzen..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probatu atakak"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Gehitu inprimagailu berria"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Ongi etorri inprimagailua instalatzeko morroira\n"
-"\n"
-"Morroi honen bidez, ordenagailuan erabil daitezkeen inprimagailu urruneko "
-"edo lokalak instalatzeko laguntza jasoko duzu, baita saretik instalatzeko "
-"ere.\n"
-"\n"
-"Inprimagailua instalatzeko behar duen informazioa eskatuko dizu eta "
-"inprimagailu-kontrolatzaile, kontrolatzaile-aukera eta konexio-mota "
-"erabilgarri guztiak jarriko ditu zure esku."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Inprimagailu lokala"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Ongi etorri inprimagailuak instalatzeko morroira\n"
-"\n"
-"Morroi honen bidez, ordenagailuarekin konektatutako inprimagailuak "
-"instalatzeko laguntza jasoko duzu.\n"
-"\n"
-"Konektatu inprimagailua ordenagailuarekin eta piztu ezazu. Aurrera "
-"jarraitzeko, egin klik \"Hurrengoa\"n, eta instalazioa bertan behera uzteko "
-"egin klik \"Utzi\"n .\n"
-"\n"
-"Ordenagailu batzuk kraskatu egin daitezke inprimagailuen auto-detekzioan, "
-"desaktibatu \"Automatikoki detektatu inprimagailuak\", auto-detekzioa ez "
-"erabiltzeko. Erabili \"Aditu modua\" PrinterDrake-n, urruneko inprimagailu "
-"batean inprimatzea konfiguratu nahi baduzu eta zerrendan agertzen ez bada."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatikoki detektatu inprimagailuak"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Zorionak, inprimagailua instalatuta eta konfiguratuta duzu!\n"
-"\n"
-"Inprimatzeko, aplikazioko \"Inprimatu\" komandoa erabil dezakezu (normalean "
-"\"Fitxategia\" menuan izan ohi da).\n"
-"\n"
-"Inprimagailu bat gehitu, kendu, edo izenez aldatu nahi baduzu, edo ezarpen "
-"lehenetsiak (paper-iturria, inprimatze-kalitatea...) aldatu nahi badituzu, "
-"hautatu \"Inprimagailua\" Mandrake Kontrol Zentroko \"Hardwarea\" atalean."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Inprimagailuen detekzio automatikoa"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake-k lokalki konektatutako paraleloko edo USB inprimagailuak "
-"detekta ditzake automatikoki, baina sistema batzuetan auto-detekzioak "
-"BLOKEATU ETA HONDATU EGIN DITZAKE FITXATEGI-SISTEMAK! Beraz, ZUREA DA "
-"ARRISKUAREN ARDURA!\n"
-"\n"
-"Inprimagailuak automatikoki detektatu nahi dituzu?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Egin auto-detekzioa"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Ezarri inprimagailua eskuz"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s detektatua"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "\\/*%s ataka paraleloko inprimagailua"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "\\/*%s USB inprimagailua"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ez da inprimagailu lokalik aurkitu! Inprimagailua eskuz instalatzeko, idatzi/"
-"gailu/fitxategi izena (Ataka paraleloak: /dev/lp0, /dev/lp1, ..., "
-"baliokideak dira LPT1:, LPT2:..., lehen USB inprimagailua: /dev/usb/lp0, "
-"bigarren USB inprimagailua: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Gailua edo fitxategi-izena adierazi behar duzu!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ez da inprimagailu lokalik aurkitu!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Sareko inprimagailuak soilik instalazioaren ondoren instala daitezke. "
-"Hautatu \"Hardwarea\" eta gero \"Inprimagailuak\" Mandrake Kontrol Zentroan."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Sareko inprimagailuak inprimatzeko, hautatu \"Utzi\", hautatu \"Aditu modua"
-"\", eta egin klik \"Gehitu inprimagailu berria\" aukeran berriro."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Inprimagailu hau detektatu da automatikoki, zuk konfiguratu nahi duzuna ez "
-"bada, idatzi gailuaren izena/fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Automatikoki detektatutako inprimagailuen zerrenda da hau. Hautatu "
-"konfiguratu nahi duzuna edo idatzi gailuaren izena/fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Inprimagailu hau detektatu da automatikoki. Inprimagailuaren konfigurazioa "
-"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
-"baduzu konfigurazio pertsonalizatua, aldatu \"Eskuzko konfigurazioa"
-"\"aukerara."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Automatikoki detektatutako inprimagailuen zerrenda da hau. Hautatu "
-"konfiguratu nahi duzuna. . Inprimagailuaren konfigurazioa zeharo "
-"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
-"baduzu konfigurazio pertsonalizatua, hautatu \"Eskuzko konfigurazioa\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
-"fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Aukeratu inprimagailua konektatuta dagoen ataka."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Ataka paraleloak: /dev/lp0, /dev/lp1..., baliokideak dira LPT1:, LPT2:..., "
-"lehen USB inprimagailua: /dev/usb/lp0, 2. USB inprimagailua: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Inprimagailua/gailua aukeratu/adierazi behar duzu!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Eskuzko konfigurazioa"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Zure inprimagailua funtzio anitzeko HP gailua da (OfficeJet, PSC, "
-"PhotoSmart, LaserJet 1100/1200/1220/3200/3300 eskanerrarekin)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "HPOJ paketea instalatzen..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Gailua egiaztatzen eta HPOJ konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "SANE paketea instalatzen..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Funtzio anitzeko HP gailuan eskaneatzen"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Inprimagailu-ataka CUPSerako erabilgarri egiten..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Inprimagailuaren datu-basea irakurtzen..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Urruneko lpd inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Urruneko lpd inprimagailua erabiltzeko, inprimagailu-zerbitzariaren "
-"ostalari-\n"
-"izena eta zerbitzari horretako inprimagailu-izena eman behar dituzu."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Urruneko ostalari-izena"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Urruneko inprimagailu-izena"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Urruneko ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Urruneko inprimagailu-izena falta da!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB inprimagailuan inprimatzeko, SMB ostalari-izena eman behar duzu (Oharra! "
-"Baliteke TCP/IP ostalari-izena desberdina izatea!) eta beharbada inprimaketa-"
-"zerbitzariaren IP helbidea eta baita atzitu nahi duzun inprimagailuaren "
-"konpartitze-izena eta erabiltzaile-izenak, pasahitzak eta lantalde-"
-"informazioa ere."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB zerbitzariaren ostalaria"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB zerbitzariaren IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Konpartitze-izena"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Lantaldea"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Zerbitzari-izena edo zerbitzariaren IP eman behar da!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba konpartitze-izena falta da!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare inprimagailuan inprimatzeko, NetWare inprimaketa-zerbitzariaren "
-"izena eman behar duzu (Oharra! baliteke bere TCP/IP ostalari-izena "
-"desberdina izatea!) eta baita atzitu nahi duzun inprimagailuaren inprimaketa-"
-"ilararen izena eta erabiltzaile-izenak eta pasahitzak ere."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Inprimagailu-zerbitzaria"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Inprimaketa-ilararen izena"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP zerbitzari-izena falta da!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP ilara-izena falta da!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Socket inprimagailuan inprimatzeko, inprimagailuaren ostalari-izena\n"
-"eman behar duzu eta, nahi baduzu, ataka-zenbakia. HP JetDirect "
-"zerbitzarietan ataka-zenbakia normalki 9100 izaten da, beste zerbitzari "
-"batzuetan aldatu egin daiteke. Begiratu zure hardwarearen eskuliburuan."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Inprimagailuaren ostalari-izena"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Inprimagailuaren ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Inprimagailuaren URIa"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Inprimagailua atzitzeko URIa zuzenean zehatz dezakezu. URIak CUPS edo "
-"Foomatic zehaztapenak bete behar ditu. Kontuan izan spooler guztiek ez "
-"dituztela URI mota guztiak onartzen."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Baliozko URI bat sartu behar da!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Inprimagailu bakoitzak izen bat behar du (adibidez \"inprimagailua\"). "
-"Azalpenaren eta Kokalekuaren eremuak ez dira nahitaez bete behar. "
-"Erabiltzaileentzako iruzkinak dira."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Inprimagailuaren izena"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Azalpena"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Kokalekua"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Inprimagailuaren datu-basea prestatzen..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Zure inprimagailu-modeloa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake-k inprimagailua auto-detektatzean lortutako modelo-izena "
-"inprimagailuen datu-basean dituen modeloekin konparatu du, egokiena "
-"aurkitzeko. Aukera okerrekoa izan daiteke, batez ere zure inprimagailua ez "
-"bada azaltzen datu-baseko zerrendan. Beraz, begiratu aukera egokia den eta, "
-"hala bada, egin klik \"Modeloa zuzena da\"n, bestela, egin klik \"Hautatu "
-"modeloa eskuz\"en hurrengo pantailara joan eta modeloa eskuz hautatzeko.\n"
-"\n"
-"Hau aurkitu du Printerdrake-k zure inprimagailuarentzat:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Modeloa zuzena da"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Hautatu modeloa eskuz"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Inprimagailu-modeloaren hautapena"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Zein inprimagailu-modelo daukazu?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Begiratu Printerdrake-k ondo detektatu duen automatikoki zure inprimagailu-"
-"modeloa. Bilatu modelo egokia zerrendan kurtsorea okerreko modeloan edo  "
-"\"Inprimagailu gordinean\" badago."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Zure inprimagailua ez badago zerrendan, aukeratu bateragarria (ikus "
-"inprimagailuaren eskuliburua) edo antzekoa den bat "
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter-en konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"OKI laser winprinter inprimagailua konfiguratzen ari zara. Inprimagailu "
-"horiek oso komunikazio-protokolo berezia erabiltzen dute eta beraz "
-"paraleloko lehen atakara konektatuta soilik funtzionatzen dute. "
-"Inprimagailua beste ataka batera edo inprimaketa-zerbitzari batera "
-"konektatuta badago, konektatu inprimagailua paraleloko lehen atakarekin "
-"probako orria inprimatu aurretik. Bestela, inprimagailuak ez du "
-"funtzionatuko. Zure konexio-motaren ezarpena ez du kontuan hartuko "
-"kontrolatzaileak."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet inprimagailuaren konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark-en Inkjet inprimagailu-kontrolatzaileek inprimagailu lokalak soilik "
-"onartzen dituzte, ez urruneko makinetako inprimagailuak edo inprimaketa-"
-"zerbitzariak. Konektatu zure inprimagailua ataka lokal batera edo konfigura "
-"ezazu konektatuta dagoen makinan."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Lexmark inkjet-ekin eta konfigurazio honekin inprimatu ahal , izateko, "
-"Lexmark-ek emandako inkjet inprimagailu-kontrolatzaileak behar dituzu "
-"(http://www.lexmark.com/). Joan Estatu Batuetako gunera eta egin klik "
-"\"Drivers\" botoian. Gero aukeratu modeloa eta ondoren \"Linux\" sistema "
-"eragile gisa. Kontrolatzaileak RPM pakete gisa edo instalazio grafiko "
-"interaktiboa duten shell script gisa egoten dira. Ez da beharrezkoa "
-"konfigurazio hau interfaze grafikoen bidez egitea. Ezeztatu zuzenean "
-"lizentzia-kontratuaren ondoren. Gero inprimatu inprimatze-burua lerrokatzeko "
-"orriak \"lexmarkmaintain\"ekin eta doitu burua lerrokatzeko ezarpenak "
-"programa honekin."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Inprimagailuaren ezarpen lehenetsiak\n"
-"\n"
-"Ziurtatu orri-tamaina eta tinta-mota/inprimatzeko modua (erabilgarri badago)"
-"eta laser inprimagailuaren hardware-konfigurazioa zuzen ezarri direla. "
-"Kontuan hartu inprimatzeko kalitatea oso handia bada askoz mantsoago "
-"inprimatuko duela segurutik."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s aukerak osoko zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s aukerak zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s aukera barrutitik kanpo dago!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Inprimagailu hau (\"%s\")\n"
-"lehenetsi nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Proba-orriak"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Hautatu inprimatu nahi dituzun proba-orriak.\n"
-"Kontuan hartu: argazkien proba-orriak denbora asko behar izan dezake "
-"inprimatzeko, eta memoria gutxiko laser inprimagailuetan baliteke ez "
-"ateratzea ere. Gehienetan nahikoa izaten da proba-orri estandarra "
-"inprimatzea."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Proba-orririk ez"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Inprimatu"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Proba-orri estandarra"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Proba-orri alternatiboa (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Proba-orri alternatiboa (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Argazkien proba-orria"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Ez inprimatu proba-orririk"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Proba-orria(k) inprimatzen..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Proba-orria(k) inprimagailura bidali dira.\n"
-"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
-"Inprimatze-egoera:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Proba-orria(k) inprimagailura bidali dira.\n"
-"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Ongi egin du?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Inprimagailu \"gordina\""
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, \"%s "
-"<fitxategia>\" komandoa edo inprimatze-tresna grafiko bat erabil dezakezu: "
-"\"xpp <fitxategia>\" edo \"kprinter <fitxategia>\". Tresna grafikoak "
-"inprimagailua hautatzeko eta aukeren ezarpenak erraz aldatzeko erabiltzen "
-"dira.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Komando horiek aplikazio askotako inprimatze-elkarrizketetako \"Inprimatzeko "
-"komandoa\" eremuan erabil ditzakezu ere, baina hor ez eman fitxategi-izena, "
-"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\" komandoaren bidez ere alda daitezke inprimatze-lan jakin baten aukera-"
-"ezarpenak. Gehitu nahi dituzun ezarpenak komando-lerroari, adib. \"%s "
-"<fitxategia>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Uneko inprimagailuak dituen aukerak ezagutzeko, irakurri ondoko zerrenda edo "
-"egin klik \"Inprimatzeko aukeren zerrenda\" botoian.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hemen duzu inprimagailu honen inprimatzeko aukeren zerrenda:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
-"<fitxategia>\" komandoa.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Komando hau aplikazio askotako inprimatze-elkarrizketetako \"Inprimatzeko "
-"komandoa\" eremuan ere erabil dezakezu. Baina hor ez eman fitxategi-izena, "
-"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Uneko inprimagailuaren aukera erabilgarrien zerrenda eskuratzeko, egin klik "
-"\"Inprimatzeko aukeren zerrenda\" botoian."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
-"<fitxategia>\" komandoa edo \"%s <fitxategia>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"\"xpdq\" interfaze grafikoa ere erabil dezakezu aukerak ezartzeko eta "
-"inprimatze-lanak maneiatzeko.\n"
-"KDE erabiltzen baduzu mahaigaineko ingurune gisa, \"estualdi-botoi\" bat "
-"egongo da, \"GELDITU inprimagailua!\" dioena, eta inprimatze-lan guztiak "
-"berehala etengo ditu bertan klik egitean. Papera trabatzen denean eta "
-"horrelakoetan erabili ohi da.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" eta \"%s\" komandoen bidez inprimatze-lan baten aukera-ezarpenak alda "
-"daitezke. Aski da nahi diren ezarpenak komando-lerroan gehitzea, adib.: \"%s "
-"<fitxategia>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Itxi"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "\"%s\": inprimatzen/eskaneatzen"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "\"%s\" inprimagailuan inprimatzen"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Inprimatzeko aukeren zerrenda"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Funtzio anitzeko HP gailua automatikoki konfiguratuta dago eskaneatzeko. "
-"Orain \"scanimage\"rekin eskanea dezakezu (\"scanimage -d hp:%s\" eskanerra "
-"zehazteko, bat baino gehiago badituzu) komando-lerrotik edo \"xscanimage\" "
-"edo \"xsane\" interfaze grafikoekin. GIMP erabiltzen baduzu, \"File\"/"
-"\"Acquire\" menuko puntu egokiaren bidez ere eskanea dezakezu. Informazio "
-"gehiago nahi baduzu, idatzi \"man scanimage\" eta \"man sane-hp\" komando-"
-"lerroan.\n"
-"\n"
-"Ez erabili \"scannerdrake\" gailu honekin!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Funtzio anitzeko HP gailua automatikoki konfiguratuta dago eskaneatzeko. "
-"Orain komando-lerrotik eskanea dezakezu \"ptal-hp %s scan ...\"ekin. Zure "
-"gailuak ez du onartzen interfaze grafikoaren edo GIMPen bidez eskaneatzea. "
-"Informazio gehiago, sistemako \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" "
-"fitxategian aurkituko duzu. HP LaserJet 1100 edo 1200 baldin  baduzu, "
-"eskanerraren aukera instalatuta daukazunean bakarrik eskaneatu ahal izango "
-"duzu.\n"
-"\n"
-"Ez erabili \"scannerdrake\" gailu honekin!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Inprimagailu-datuak irakurtzen..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transferitu inprimagailu-konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"%s spooler-erako egin duzun inprimagailu-konfigurazioa %s spooler-era (uneko "
-"spooler-era) kopia dezakezu. Konfigurazio-datu guztiak (inprimagailuaren "
-"izena, azalpena, kokalekua, \n"
-"konexio-mota eta aukera-ezarpenak lehenetsiak) hartuko ditu, baina lanak ez "
-"dira transferituko.\n"
-"Ilara guztiak ezin dira transferitu, ondorengo arrazoiak direla eta:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPSek ez ditu onartzen Novell zerbitzarietako inprimagailuak edo datuak "
-"libre osatutako komando batean bidaltzen dituztenak.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQk inprimagailu lokalak, urruneko LPD inprimagailuak eta Socket/TCP "
-"inprimagailuak soilik onartzen ditu.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPDk eta LPRng-ek ez dute IPP inprimagailurik onartzen.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Gainera, programa honen edo \"foomatic-configure\"ren bidez sortu ez diren "
-"ilarak ezin dira transferitu."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Halaber, fabrikatzaileek emandako PPD fitxategiekin edo jatorrizko CUPS "
-"kontrolatzaileekin konfiguratutako inprimagailuak ezin dira transferitu."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markatu transferitu nahi dituzun inprimagailuak eta sakatu\n"
-"\"Transferitu\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Ez transferitu inprimagailuak"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transferitu"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" izeneko inprimagailu bat badago %s(e)n. \n"
-"Sakatu \"Transferitu\" gainidazteko.\n"
-"Beste izen bat idatz dezakezu, edo inprimagailu hori saltatu."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Inprimagailu-izenak letrak, zenbakiak eta azpimarra soilik eduki behar ditu"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" inprimagailua badago lehendik ere,\n"
-"bere konfigurazioa gainidatzi nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Inprimagailu-izen berria"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s transferitzen..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Zure lehengo inprimagailu lehenetsia (\"%s\") transferitu duzu, Inprimagailu "
-"lehenetsia izan behar du %s inprimatze-sistema berrian ere?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Inprimagailuaren datuak freskatzen..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Urruneko inprimagailu baten konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Sarea abiarazten ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfiguratu sarea orain"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Sare-funtzionalitatea ez dago konfiguratuta"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Urruneko inprimagailu bat konfiguratzera zoaz. Sarerako sarbidea behar duzu "
-"horretarako, baina sarea konfiguratu gabe dago. Aurrera jarraitzen baduzu "
-"sarea konfiguratu gabe, ezin izango duzu orain konfiguratzen ari zaren "
-"inprimagailua erabili. Zer egin nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Jarraitu sarea konfiguratu gabe"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Instalazioan egindako sare-konfigurazioa ezin da abiarazi orain. "
-"Berrabiarazi sistema eta begiratu ea sarean sartzen zaren eta, ondoren, "
-"zuzendu konfigurazioa Mandrake Kontrol Zentroko \"Sarea eta Internet\"/"
-"\"Konexioa\" atalean, eta gero konfiguratu inprimagailua, Mandrake Kontrol "
-"Zentroan bertan, \"Hardwarea\"/\"Inprimagailua\" atalean."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Sarerako sarbidea ez dago martxan eta ezin da abiarazi. Begiratu "
-"konfigurazioa eta hardwarea ondo dauden. Gero saiatu berriro urruneko "
-"inprimagailua konfiguratzen."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Inprimatze-sistema berrabiarazten ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "handia"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidea"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Inprimatze-sisteman segurtasun-maila %s instalatzen"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"%s inprimatze-sistema segurtasun-maila %sn dabilen sisteman instalatzera "
-"zoaz.\n"
-"\n"
-"Inprimatze-sistema honek inprimatze-lanei itxaroteko eta lanak maneiatzeko "
-"daemon (atzeko planoko prozesu) bat exekutatzen du. Daemon hori urruneko "
-"makinek ere atzitu dezakete sarearen bitartez eta hala, erasoak jasateko "
-"gunea izan daiteke. Beraz, daemon hautatu bakan batzuk besterik ez dira "
-"abiarazten lehenespenez segurtasun-maila honetan.\n"
-"\n"
-"Makina honetan konfiguratu nahi duzu inprimaketa?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Abioan inprimatze-sistema abiarazi"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"(%s) inprimatze-sistema ez da automatikoki hasiko makina abiarazten denean.\n"
-"\n"
-"Baliteke abiarazte automatikoa desaktibatuta egotea segurtasun-maila "
-"handiagora aldatu delako, eta inprimatze-sistema eraso-gune potentziala "
-"delako.\n"
-"\n"
-"Inprimatze-sistema automatikoki hastea berriro aktibatu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Instalatutako softwarea egiaztatzen..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng kentzen..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD kentzen..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Hautatu inprimagailuaren spooler-a"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Zein inprimatze-sistema (spooler) erabili nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "\"%s\" inprimagailua konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Foomatic instalatzen ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake prestatzen..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Aplikazioak konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Inprimaketa konfiguratu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Inprimatze-sistema: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Ondoko inprimagailuak daude konfiguratuta. Egin klik bikoitza inprimagailu "
-"batean ezarpenak aldatzeko; inprimagailua lehenesteko; informazioa ikusteko; "
-"edo urruneko CUPS zerbitzari bateko inprimagailu bat Star Office/OpenOffice."
-"org-rentzat erabilgarri egiteko."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Ondoko inprimagailuak daude konfiguratuta. Ezarpenak aldatzeko, inprimagailu "
-"bat lehenesteko edo informazioa ikusteko, egin klik bikoitza inprimagailu "
-"batean."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Freskatu inprimagailu-zerrenda (urruneko CUPS inprimagailuak ikusteko)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Aldatu inprimatzeko sistema"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modu normala"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Beste inprimagailu bat konfiguratu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Aldatu inprimagailuaren konfigurazioa"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"%s inprimagailua\n"
-"Zer da inprimagailu honetan aldatu nahi duzuna?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Egin!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Inprimagailuaren konexio-mota"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Inprimagailuaren izena, azalpena, kokalekua"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Inprimagailuaren fabrikatzailea, modeloa, kontrolatzailea"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Inprimagailuaren fabrikatzailea, modeloa"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Ezarri inprimagailu hau lehenetsi gisa"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Gehitu inprimagailu hau Star Office/OpenOffice.org-n"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Kendu inprimagailu hau Star Office/OpenOffice.org-tik"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Inprimatu proba-orriak"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Ikasi inprimagailua erabiltzen"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Kendu inprimagailua"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "\"%s\" inprimagailu zaharra kentzen..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Inprimagailu lehenetsia"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "\"%s\" inprimagailua lehenetsi gisa ezarri da orain."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Star Office/OpenOffice.org-n inprimagailua gehitzen"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"\"%s\" inprimagailua behar bezala gehitu da Star Office/OpenOffice.org-n."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org-n gehitzean."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Inprimagailua Star Office/OpenOffice.org-tik kentzen"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"\"%s\" inprimagailua behar bezala kendu da Star Office/OpenOffice.org-tik."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org-tik kentzean."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "\"%s\" inprimagailua kendu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "\"%s\" inprimagailua kentzen..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-konfigurazioa"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Ongi etorri proxy-a konfiguratzeko utilitatera.\n"
-"\n"
-"Hemen zure http eta ftp proxy-ak konfiguratu ahal izango\n"
-"dituzu, erabiltzaile-izenarekin eta pasahitzarekin edo gabe.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Bete http proxy-aren datuak\n"
-"Utzi hutsik ez baduzu http proxy-rik nahi"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URLa"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ataka"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URLaren hasieran 'http:' jarri behar du"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Atakaren zatiak zenbakizkoa izan behar du"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Bete ftp proxy-aren datuak\n"
-"Utzi hutsik ez baduzu ftp proxy-rik nahi"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URLaren hasieran 'ftp:' jarri behar du"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Sartu proxy-aren erabiltzaile-izena eta pasahitza, baldin badago.\n"
-"Utzi hutsik ez baduzu erabiltzaile-izen/pasahitzik nahi"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "erabiltzaile-izena"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "pasahitza"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "idatzi pasahitza berriro"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Pasahitzak ez datoz bat. Saiatu berriro!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ezin zaio partizio bat gehitu RAID md%d-ri (formateatuta dago)"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ezin da %s fitxategia idatzi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid-ek huts egin du"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid-ek huts egin du (beharbada raid-tresnak faltako dira?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ez dago nahikoa partizio %d RAID mailarako\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Abiarazi ALSA (Advanced Linux Sound Architecture) soinu-sistema"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, komando-antolatzaile periodikoa."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bateriaren egoera kontrolatzeko eta syslog-en jasotzeko erabiltzen\n"
-"da. Bateria gutxi dagoenean makina itzaltzeko ere erabil daiteke."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at komandoaren bidez programatutako komandoak exekutatzen ditu at \n"
-"exekutatzean zehaztutako orduan, eta batch komandoak exekutatzen ditu \n"
-"batezbesteko karga nahikoa baxua denean."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron UNIX programa estandar bat da, erabiltzaileak zehaztutako programak\n"
-"programatutako orduan exekutatzen dituena. vixie cron-ek hainbat eginbide \n"
-"gehitzen dizkio oinarrizko UNIX cron-i, hala nola segurtasun hobea eta "
-"konfigurazio-aukera ahaltsuagoak."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPMk saguaren euskarria gehitzen die Midnight Commander bezalako\n"
-"testuan oinarritutako Linux aplikazioei. Halaber kontsolan saguaren bidez "
-"ebaki eta itsasteko aukera ematen du eta laster-menuen euskarria eransten du."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake-k hardware-proba bat exekutatzen du eta nahi izanez \n"
-"gero hardware berria/aldatua konfiguratzen du."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache World Wide Web-eko zerbitzari bat da. HTML fitxategiak eta CGI "
-"zerbitzatzeko erabili ohi da."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneteko superzerbitzariaren daemon-ak (normalki inetd deitua) beste\n"
-"hainbat Internet-zerbitzu abiarazten ditu, behar izan ahala. Zerbitzu asko "
-"abiarazten ditu,\n"
-"hala nola telnet, ftp, rsh, eta rlogin. inetd desgaitzean bere ardurapeko\n"
-"zerbitzu guztiak desgaitzen dira."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Abiarazi Linux-nukleoen 2.2 serieko pakete-iragazketa, zure \n"
-"makina sareko erasoetatik babesteko suebaki bat ezartzeko."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Pakete honek hautatutako teklatu-mapa kargatzen du\n"
-"/etc/sysconfig/keyboard fitxategian ezarritakoaren arabera.  kbdconfig "
-"utilitatearen bidez hauta daiteke teklatu-mapa.\n"
-"Zerbitzu hau gaituta uztea komeni da makina gehienetan."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Nukleoaren goiburukoaren birsortze automatikoa /boot-en\n"
-"honentzat: /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Hardwarea automatikoki detektatu eta konfiguratzea abioan."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf-ek batzuetan hainbat ataza egiten ditu abioan\n"
-"sistemaren konfigurazioa mantentzeko."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd inprimaketako daemon-a da. Beharrezkoa da lpr-k ondo funtziona\n"
-"dezan. Inprimatze-lanak inprimagailu(eta)ra esleitzen dituen zerbitzaria da."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-en Zerbitzari Birtuala, performantzia handiko zerbitzari oso\n"
-"erabilgarria eraikitzeko erabiltzen da."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) domeinu-izenen zerbitzari bat (DNS) da, ostalari-izenak ebatzi "
-"eta IP helbide bihurtzeko erabiltzen dena."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Network File System (NFS), SMB (Lan Manager/Windows), eta NCP \n"
-"(NetWare) muntatze-puntu guztiak muntatu eta desmuntatzen ditu."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Abioan hasteko konfiguratuta dauden sare-interfaze guztiak\n"
-"aktibatzen/desaktibatzen ditu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak konpartitzeko.\n"
-"Zerbitzu honek NFS zerbitzariaren funtzionaltasuna (/etc/exports "
-"fitxategian\n"
-"konfiguratua) eskaintzen du."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak \n"
-"konpartitzeko. Zerbitzu honek NFS fitxategi-blokeatzearen funtzionalitatea\n"
-"eskaintzen du."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Abioan automatikoki aktibatu BlokZenb tekla (zenbakiak\n"
-"blokeatzekoa) kontsolan eta XFree-n."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Onartu OKI 4w eta winprinter bateragarriak."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA euskarria eramangarrietan ethernet eta modemak\n"
-"eta horrelakoak onartzeko izaten da normalki.  Ez da abiaraziko "
-"konfiguratuta izan ezean, beraz\n"
-"lasai eduki daiteke instalatuta premiarik izan ez arren."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ataka-mapatzaileak RPC konexioak kudeatzen ditu. Konexio horiek\n"
-"NFS eta NIS moduko protokoloek erabiltzen dituzte. RPC mekanismoa erabiltzen "
-"duten\n"
-"protokoloen zerbitzari gisa jokatzen duten makinetan aktibatu behar da\n"
-"ataka-maparen zerbitzaria."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix posta garraiatzeko agentea da (Mail Transport Agent - MTA), hau da, "
-"posta elektronikoa makina batetik bestera eramaten duen programa."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sistemaren entropia gorde eta leheneratzen du ausazko zenbakiak\n"
-"hobeto sortzeko."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Esleitu gailu \"gordinak\" (raw devices) blokeko gailuei \n"
-"(disko gogorreko partizioak adib.), Oracle bezalako aplikazioentzat."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon-arekin IP bidatze-taula automatikoki egunera daiteke,\n"
-"RIP protokoloaren bidez. RIP asko erabiltzen da sare txikietan, baina\n"
-"banabide-protokolo konplexuagoak behar dira sare konplexuetan."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokoloari esker, sareko erabiltzaileek sare horretako \n"
-"edozein makinaren performantzia nolakoa den jakin dezakete."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokoloak sare bateko erabiltzaileei beste makina batzuetan\n"
-"nor sartzen den identifikatzeko aukera ematen die."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokoloak urruneko erabiltzaileei rwho daemon-a (finger-en antzekoa)\n"
-"duen makina batean sartutako erabiltzaile guztien zerrenda eman diezaieke."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Abiarazi zure makinako soinu-sistema"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog, daemon askok erabiltzen duten zerbitzua da, mezuak sistemako\n"
-"hainbat egunkari-fitxategitan sartzeko.  Komeni izaten da syslog beti "
-"exekutatzea."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Kargatu USB gailuen kontrolatzaileak."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X letra-tipoen zerbitzaria abiarazten du (nahitaezkoa da XFree-k\n"
-"funtzionatu ahal izan dezan.)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Aukeratu zein zerbitzari abiarazi behar den automatikoki abioan"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Inprimatzea"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fitxategi-konpartitzea"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Urruneko administrazioa"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Datu-baseen zerbitzaria"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Zerbitzuak: %d aktibatuta / %d erregistratuta"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Zerbitzuak"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "martxan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "geldituta"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Zerbitzuak eta daemon-ak"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ez dago zerbitzu honi buruzko\n"
-"informazio gehiago."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Abioan"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Hasi"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Gelditu"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Eskerrik asko Mandrake Linux 8.2 aukeratzeagatik"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Ongi etorri iturburu irekiaren mundura"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSoft-en arrakastaren funtsa software librearen printzipioa da. Zure "
-"sistema eragile berria mundu osoko Linux komunitatearen elkarlanaren emaitza "
-"da"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Sar zaitez software librearen munduan"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Ezagutu iturburu irekiaren komunitatea eta egin zaitez partaide. "
-"Sartu eztabaida-taldeetan \"Komunitatearen\" web orrien bidez eta ikasi, "
-"irakatsi eta lagundu beste batzuei."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet eta mezularitza"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2k software-aukera onenak eskaintzen dizkizu Internetek "
-"eman lezakeen guztia eskura dezazun. Murgildu amaraunean eta ikusi "
-"animazioak Mozilla eta Konqueror-ekin, trukatu mezuak eta antolatu zure "
-"informazio pertsonala Evolution eta Kmail-ekin, eta askoz ere gehiago"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia eta grafikoak"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2ekin zure multimedia ordenagailua mugaraino eramango duzu! "
-"Erabili audio-fitxategiak erreproduzitzeko, irudiak eta argazkiak editatu "
-"eta manipulatzeko eta TB eta bideoak ikusteko eta beste gauza askotarako "
-"azken softwarea "
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Garapena"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 garapen-plataforma ezin hobea da. Ezagutu GNU gcc "
-"konpilatzailearen ahalmen osoa eta iturburu irekiko garapen-ingurune onenak"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake-ren Kontrol Zentroa"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2ren Kontrol Zentroak leku bakarretik zure Mandrake sistema "
-"erabat konfiguratu eta pertsonalizatzeko aukera ematen dizu"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Erabiltzaile-interfazeak"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2k 11 mahaigaineko ingurune grafiko eta leiho-kudeatzaile "
-"desberdin ematen ditu aukeran, horien artean, GNOME 1.4, KDE 2.2.2, Window "
-"Maker 0.8, eta abar"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Zerbitzari-softwarea"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Bihur ezazu zure makina zerbitzari ahaltsu, saguaren klik gutxi batzuk "
-"eginez: Web zerbitzaria, posta, suebakia, bidatzailea, fitxategi- eta "
-"inprimaketa-zerbitzaria,..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jokoak"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2k iturburu irekiko jokorik onenak eskaintzen ditu - makina-"
-"jokoak, kiroletakoak, estrategiakoak, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Linux erabiltzen ikasi nahi duzu erraz, bizkor, eta doan? MandrakeSoft-ek "
-"Linux ikasteko doako zerbitzua eskaintzen dugu, zure aurrerapena neurtuz, "
-"MandrakeCampus lineako trebakuntza-zentroaren bidez"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kalitatezko laguntza-zerbitzua eskaintzen dute Linux komunitateak eta "
-"MandrakeSoft-ek, eta hortxe bertan duzu. Linux-en beteranoa bazara, egin "
-"zaitez \"Aditu\", eta konpartitu zure jakituria eta gure laguntzako web "
-"gunea "
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Zure IT proiektuetarako, hor dituzu gure ahokulariak, zure premiak ulertu "
-"eta konponbide pertsonalizatua emateko prest. MandrakeSoft-ek, Linux ekoizle "
-"gisa duen esperientzia handiarekin, benetako IT alternatiba ematen du "
-"enpresa-antolamendurako"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Gure denda elektronikoan eskuragai dituzu gure Linux soluzioen aukera "
-"zabala, produktuei buruzko eskaintza bereziak eta bestelako 'gutiziak'"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"MandrakeSoft-en Zerbitzu Profesionalei eta eskaintza komertzialei buruzko "
-"informazioa nahi baduzu, ikus web orri hau:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Paketeak instalatzen..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ezin dut zure partizio-taula irakurri, hondatuegia dago :(\n"
-"Partizio txarrak garbitzen saiatuko naiz"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Errorea!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ezin da aurkitu `%s' imajina-fitxategia, eta beharrezkoa da."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Instalazio automatikoaren konfiguratzailea"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Auto-instalazioko diskete bat konfiguratzera zoaz. Eginbide hau arriskutsu "
-"samarra da eta kontuz ibili behar da.\n"
-"\n"
-"Eginbide honekin, ordenagailu honetan egin duzun instalazioa errepikatu ahal "
-"izango duzu, eta urrats batzuetan datuak eskatuko zaizkizu interaktiboki, "
-"balioak aldatu ahal izateko.\n"
-"\n"
-"Ahalik eta segurtasun handiena izateko, partizioa egitea eta formateatzea ez "
-"dira inoiz automatikoki egingo, berdin dio zer aukeratu duzun ordenagailu "
-"hau instalatu duzunean.\n"
-"\n"
-"Jarraitu nahi duzu ?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Urrats automatikoen konfigurazioa"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Aukeratu urrats bakoitzean instalazioa errepikatuko den, ala eskuz egingo "
-"duzun"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Ongi etorri.\n"
-"\n"
-"Auto-instalazioko parametroak ezkerreko sekzioetan daude erabilgarri"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Zorionak!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketea behar bezala sortu da.\n"
-"Orain zure instalazioa errepika dezakezu."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Instalazio automatikoa"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Gehitu elementu bat"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Kendu azken elementua"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr "***********************************************************************\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup-en berri-ematea \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon-aren berri-ematea\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup-en berri-ematearen xehetasunak\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progresioa guztira"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sistema-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Disko gogorraren babeskopia fitxategiak... "
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Erabiltzaile-fitxategien babeskopia... "
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Disko gogorraren babeskopia egiten..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Beste fitxategi batzuen babeskopia... "
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"FTPk bidalitako fitxategi-zerrenda: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP konexio-arazoa: zure babeskopien fitxategiak ezin izan dira bidali "
-"FTP bidez.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Errorea posta bidaltzean. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Fitxategi-hautapena"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Hautatu fitxategiak edo direktorioak eta egin klik 'Gehitu'n"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Hautatu behar dituzun aukera guztiak.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Aukera horiek /etc direktorioko fitxategi guztiak kopiatu eta leheneratu "
-"ditzakete.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sistema-fitxategien babeskopia. ( /etc direktorioa )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Erabili babeskopia inkrementala (ez ordeztu kopia zaharrak)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ez sartu fitxategi kritikoak (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Aukera honekin /etc direktorioaren edozein bertsio leheneratu\n"
-"ahal izango duzu."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Hautatu babeskopian sartu nahi dituzun erabiltzaile guztiak."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ez sartu arakatzailearen cache-a"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Erabili babeskopia inkrementalak (ez ordeztu kopia zaharrak)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Kendu hautatutakoak"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Erabiltzaileak"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Erabili FTP konexioa babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Idatzi ostalariaren izena edo IPa."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Adierazi ostalariko direktorioa\n"
-"babeskopia jartzeko."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Sartu saioa hasteko izena"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Sartu pasahitza"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Gogoratu pasahitza"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP konexioa"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Konexio segurua"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Erabili CD/DVDROMa babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Aukeratu CDko lekua"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Hautatu CDRW euskarria erabiltzen baduzu"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Hautatu CDRWa ezabatu nahi baduzu lehenik"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Hautatu instalazio-abioa gehitu nahi\n"
-" baduzu CDan."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Adierazi CD idazgailuaren gailu-izena \n"
-" adib.: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Erabili zinta babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Adierazi babeskopiarako erabiliko den gailuaren izena"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Adierazi Drakbackup-en gehieneko\n"
-" tamaina "
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Adierazi gorde beharreko direktorioa:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Erabili kuota babeskopia-fitxategientzat"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Sarea"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "orduero"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "egunero"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "astero"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "hilero"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Erabili daemon-a"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Aukeratu babeskopiak egiteko \n"
-"maiztasuna"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Aukeratu babeskopia \n"
-"egiteko euskarria."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Erabili Disko gogorra daemon-arekin"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Erabili FTP daemon-arekin"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Ziurtatu cron daemon-a zerbitzuetan sartuta daukazula."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Babeskopia egindakoan, bidali berri-emateko mezua hona :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Zer"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Non"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Noiz"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Aukera gehiago"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr " Drakbackup-en konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Aukeratu non egin nahi duzun babeskopia"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "disko gogorrean"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "sarean zehar"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Aukeratu zeren kopia egin nahi duzun"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sistemaren babeskopia "
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Erabiltzaileen babeskopia"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Hautatu erabiltzailea eskuz"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Babeskopien iturburua: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Sistema-fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Erabiltzaile-fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Bestelako fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Gorde disko gogorrean, bide-izen honetan: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Gorde FTPan, ostalari honetan : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t erabiltzaile-izena: %s\n"
-"\t\t bide-izena: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Aukerak:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tEz sartu sistema-fitxategiak\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBabeskopietan erabili tar eta bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBabeskopietan erabili tar eta gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon-ean (%s) sartzen da :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t Disko gogorra.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROMa.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\tFTP bidezko sarea.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\tSSH bidezko sarea.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ez dago konfiguraziorik, egin klik Morroian edo Aurreratuan.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Leheneratu beharreko datuen zerrenda:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Hondatutako datuen zerrenda:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Desautatu edo kendu hurrengo aldian."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Babeskopien fitxategiak hondatuta daude"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Hautatu dituzun datu guztiak          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          behar bezala leheneratu dira hona: %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         leheneratzeko konfigurazioa       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Ados, leheneratu beste fitxategiak"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Leheneratzeko erabiltzaile-zerrenda (erabiltzaile bakoitzaren datu berrienak "
-"bakarrik dira garrantzitsuak)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Kopiatu sistema-fitxategiak lehenago:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "aukeratu leheneratzeko data"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Erabili disko gogorra babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Leheneratu disko gogorretik"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Adierazi zein direktoriotan dauden babeskopiak"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Hautatu beste euskarri bat leheneratzeko"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Beste euskarri bat"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Leheneratu sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Leheneratu erabiltzaileak"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Leheneratu bestelakoak"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "hautatu leheneratzeko bidea ( / ordez)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Egin babeskopia berria leheneratu aurretik (inkrementaletan soilik.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Kendu erabiltzaile-direktorioak leheneratu aurretik."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Leheneratu babeskopia guztiak."
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Leheneratze pertsonalizatua"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Laguntza"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Aurrekoa"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gorde"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Egin babeskopia"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Leheneratu"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Hurrengoa"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Egin babeskopia leheneratu aurretik...\n"
-" edo egiaztatu gordetzeko bidea zuzena dela."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Errorea posta bidaltzean\n"
-"  berri emateko mezua ez da bidali\n"
-"  Konfiguratu posta-bidalketa"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Instalatu beharreko pakete-zerrenda"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Errorea FTP bidez fitxategia bidaltzean.\n"
-" Zuzendu FTP konfigurazioa."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Hautatu leheneratzeko datuak..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Hautatu babeskopiaren euskarria..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Hautatu babeskopia egiteko datuak..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ez da konfigurazio-fitxategirik aurkitu \n"
-"egin klik Morroia-n edo Aurreratua-n."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Garatzen... itxaron."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Sistema-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Erabiltzaile-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Bestelako fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Guztizko progresioa"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "fitxategiak FTP bidez bidaltzen"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Fitxategiak bidaltzen..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "CDROMean gehitzeko datu-zerrenda"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Idatzi CD idazgailuaren abiadura"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Idatzi zure CD idazgailuaren izena (adib.: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Hautatu instalazio-abioa gehitu nahi baduzu CDan."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Egin babeskopia konfigurazio-fitxategitik"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ikusi babeskopiaren konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Morroiaren konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Konfigurazio aurreratua"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Egin babeskopia orain"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-" Urrats honetan, Drakbackup-en bidez aldatuko dituzu:\n"
-"\n"
-" - Konprimitze-modua:\n"
-"    \n"
-"      bzip2 konpresioa hautatuz, gzip-ekin baino hobeto\n"
-"      konprimituko dituzu datuak (% 2-10 inguru).\n"
-"      Aukera hau ez da lehenespen gisa hautatzen konpresio-modu\n"
-"      honek denbora gehiago (% 1000 gehiago) hartzen duelako.\n"
-" \n"
-" - Eguneratze-modua:\n"
-"\n"
-"      Aukera honek babeskopia eguneratuko du, baina ez da\n"
-"      oso erabilgarria, eguneratu aurretik babeskopia\n"
-"      deskonprimitu egin behar baita.\n"
-"      \n"
-" - .backupignore modua:\n"
-"\n"
-"      cvs-rekin bezala, Drakbackup-ek ezikusi egingo die\n"
-"      .backupignore fitxategietako erreferentzia guztiei.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Posta bidaltzean izandako errore batzuk postfix gaizki \n"
-" konfiguratuta dagoelako izan dira. Konpontzeko, \n"
-" myhostname edo mydomain ezarri behar duzu hemen: /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-" - Sistema-fitxategien babeskopia:\n"
-"       \n"
-"\tAukera honen bidez konfigurazio-fitxategi guztiak dituen\n"
-"\t/etc direktorioaren babeskopia egin daiteke. Kontuz ibili\n"
-"\tleheneratze-urratsean, eta ez gainidatzi hauek:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Erabiltzaile-fitxategien babeskopia: \n"
-"\n"
-"\tAukera honen bidez, babeskopia egiteko erabiltzaileak\n"
-"\thauta ditzakezu.\n"
-"\tDisko-lekua gordetzeko, web arakatzailearen cachea ez \n"
-"\tsartzea komeni da.\n"
-"\n"
-" - Bestelako fitxategien babeskopia: \n"
-"\n"
-"\tAukera honen bidez, gordetzeko datu gehiago gehituko dituzu.\n"
-"\tBeste babeskopiekin ezin da oraindik babeskopia inkrementala hautatu.\t\t\n"
-" \n"
-" - Babeskopia inkrementalak:\n"
-"\n"
-"\tBabeskopia-aukera ahaltsuena da. Aukera honen\n"
-"\tbidez, lehen aldian datu guztien babeskopia egin\n"
-"\tdaiteke, eta gero aldatuenak bakarrik.\n"
-"\tGero, leheneratze-urratsean, data jakin bateko\n"
-"\tdatuak leheneratu ahal izango dituzu.\n"
-"\tAukera hau hautatuta ez baduzu, babeskopia zahar guztiak\n"
-"\tezabatzen dira babeskopia bakoitza egin aurretik.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"leheneratze-azalpena:\n"
-" \n"
-"Data berrienak soilik erabiliko dira, babeskopia inkrementalean\n"
-"beharrezkoa delako babeskopia zaharrak banan-banan ezabatzea.\n"
-"\n"
-"Erabiltzaile bat leheneratu nahi ez baduzu, desautatu haren \n"
-"kontrol-laukia.\n"
-"\n"
-"Bestela, hauetako bakarra hautatu ahal izango duzu\n"
-"\n"
-" - Babeskopia inkrementalak:\n"
-"\n"
-"\tBabeskopia-aukera ahaltsuena da. Aukera honen\n"
-"\tbidez, lehen aldian datu guztien babeskopia egin\n"
-"\tdaiteke, eta gero aldatuenak bakarrik.\n"
-"\tGero, leheneratze-urratsean, data jakin bateko\n"
-"\tdatuak leheneratu ahal izango dituzu.\n"
-"\tAukera hau hautatuta ez baduzu, babeskopia zahar guztiak\n"
-"\tezabatzen dira babeskopia bakoitzaren aurretik.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft, DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Programa hau software librea da; birbana eta/edo alda dezakezu\n"
-" Software Foundation-ek argitaratutako GNU Lizentzia Publiko Orokorraren\n"
-" 2. bertsioan, edo (nahiago baduzu) beste berriago batean, jasotako\n"
-" baldintzak betez gero.\n"
-"\n"
-" Programa hau erabilgarria izango delakoan banatzen da, baina\n"
-" INOLAKO BERMERIK GABE; era berean, ez da bermatzen beraren\n"
-" EGOKITASUNA MERKATURATZEKO edo HELBURU PARTIKULARRETARAKO ERABILTZEKO.\n"
-" Argibide gehiago nahi izanez gero, ikus GNU Lizentzia Publiko Orokorra.\n"
-"\n"
-" Programa honekin batera GNU Lizentzia Publiko Orokorraren kopia bat\n"
-" jasoko zenuen; hala ez bada, idatzi hona: Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Azalpena:\n"
-"\n"
-"  Drakbackup zure sistemaren babeskopia egiteko erabiltzen da.\n"
-"  konfigurazioan zehar hauta ditzakezu: \n"
-"\t- Sistema-fitxategiak, \n"
-"\t- Erabiltzaile-fitxategiak, \n"
-"\t- Bestelako fitxategiak.\n"
-"\tedo Sistema osoa ...  eta Bestelakoa (Windows partizioetan bezala)\n"
-"\n"
-"  Drakbackup-en bidez, babeskopiak egiteko erabil daiteke:\n"
-"\t- Disko gogorra.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM.\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Zinta.\n"
-"\n"
-"  Drakbackup erabiliz, zure sistema hautatutako\n"
-"  direktorio batean lehenera dezakezu.\n"
-"\n"
-"  Lehenespen gisa, babeskopia guztiak \n"
-"  /var/lib/drakbackup direktorioan gordeko dira\n"
-"\n"
-"  Konfigurazio-fitxategia:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Leheneratze-urratsa:\n"
-"  \n"
-"  Leheneratze-urratsean, DrakBackup.ek kendu egingo du\n"
-"  jatorrizko direktorioa eta babeskopia-fitxategiak ez\n"
-"  daudela hondatuta egiaztatuko du. Leheneratu aurretik\n"
-"  babeskopia egitea gomendatzen da.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-"Kontuz ftp backup erabiltzean, eginda dauden babeskopiak \n"
-"soilik bidaliko direlako zerbitzarira.\n"
-"Beraz, orain, disko gogorrean egin behar duzu babeskopia\n"
-"zerbitzarira bidali aurretik.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Leheneratze-arazoak:\n"
-"\n"
-"Leheneratze-urratsean, Drakbackup-ek babeskopia-fitxategi\n"
-"guztiak egiaztatuko ditu leheneratu aurretik.\n"
-"Leheneratu aurretik, Drakbackup-ek kendu egingo du\n"
-"jatorrizko direktorioa, eta datu guztiak galduko dituzu.\n"
-"Garrantzizkoa da kontuz ibiltzea eta babeskopia-fitxategiak\n"
-"eskuz ez aldatzea.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Azalpena:\n"
-"\n"
-"  Drakbackup zure sistemaren babeskopia egiteko erabiltzen da.\n"
-"  konfigurazioan zehar hauta ditzakezu: \n"
-"\t- Sistema-fitxategiak, \n"
-"\t- Erabiltzaile-fitxategiak, \n"
-"\t- Bestelako fitxategiak.\n"
-"\tedo Sistema osoa ...  eta Bestelakoa (Windows partizioetan bezala)\n"
-"\n"
-"  Drakbackup-en bidez, babeskopiak egiteko erabil daiteke:\n"
-"\t- Disko gogorra.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM.\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Zinta.\n"
-"\n"
-"  Drakbackup erabiliz, zure sistema hautatutako\n"
-"  direktorio batean lehenera dezakezu.\n"
-"\n"
-"  Lehenespen gisa, babeskopia guztiak \n"
-"  /var/lib/drakbackup direktorioan gordeko dira\n"
-"\n"
-"  Konfigurazio-fitxategia:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Leheneratze-urratsa:\n"
-"  \n"
-"  Leheneratze-urratsean, DrakBackup.ek kendu egingo du\n"
-"  jatorrizko direktorioa eta babeskopia-fitxategiak ez\n"
-"  daudela hondatuta egiaztatuko du. Leheneratu aurretik\n"
-"  babeskopia egitea gomendatzen da.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%sren instalazioak huts egin du. Errore hau gertatu da:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Bilatu instalatutako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Desautatu instalatutako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "analizatu letra-tipo guztiak"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "ez da letra-tiporik aurkitu"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "eginda"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ezin izan da letra-tiporik aurkitu muntatutako partizioetan"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Hautatu berriro letra-tipo egokiak"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ezin izan da letra-tiporik aurkitu.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Bilatu letra-tipoak instalatutakoen zerrendan"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Letra-tipoen kopia"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type letra-tipoen instalazioa"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "itxaron... ttmkfdir egin bitartean..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type instalazioa eginda"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst eraikitzen"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript erreferentzia"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Ezabatu aldi baterako fitxategiak"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Berrabiarazi XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Ezabatu letra-tipoen fitxategiak"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs berrabiarazi"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Letra-tipoak instalatu aurretik, ziurtatu sisteman erabili eta instalatzeko "
-"baimena duzula.\n"
-"\n"
-"-Letra-tipoak instalatzeko ohiko era erabil dezakezu. Oso gutxitan, akastun "
-"letra-tipoek zure X Zerbitzaria blokea dezakete."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Letra-tipoen inportazioa"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hartu Windows letra-tipoak"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Desinstalatu letra-tipoak"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Aukera aurreratuak"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Letra-tipoen zerrenda"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Hautatu letra-tipoak onartuko dituzten aplikazioak :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Inprimagailu generikoak"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Hautatu letra-tipoen fitxategia edo direktorioa eta egin klik 'Gehitu'n"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalatu zerrenda"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "egin klik hemen, ziur bazaude."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "egin klik hemen, ziur ez bazaude."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Desautatutako guztiak"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Hautatutako guztiak"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Kendu zerrenda"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Hasierako probak"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiatu zure sistemako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalatu eta bihurtu letra-tipoak"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Posta-instalazioa"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Kendu zure sistemako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Posta-desinstalazioa"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Interneteko konexioa konpartitzea"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneteko konexioa konpartitzea gaituta dago orain"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
-"Gaituta dago orain.\n"
-"\n"
-"Zer egin nahi duzu?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desgaitu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "itxi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "birkonfiguratu"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Zerbitzariak desgaitzen..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneteko konexioa konpartitzea desgaituta dago orain."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneteko konexioa konpartitzea desgaituta dago orain"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
-"Desgaituta dago orain.\n"
-"\n"
-"Zer egin nahi duzu?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "gaitu"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Zerbitzariak gaitzen..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneteko konexioa konpartitzea gaituta dago orain."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ordenagailua Interneteko konexioa konpartitzeko konfiguratzera zoaz.\n"
-"Eginbide horrekin, sare lokaleko ordenagailuek zure ordenagailuko "
-"Interneteko konexioa erabili ahal izango dute.\n"
-"\n"
-"Kontuan hartu: Sare-moldagailu dedikatu bat behar duzu sare lokala (LAN) "
-"konfiguratzeko."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s interfazea (%s modulua erabiliz)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "%s interfazea"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ez dago sare-moldagailurik zure sisteman!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Zure sisteman ez da ethernet sare-moldagailurik detektatu. Exekutatu "
-"hardwarea konfiguratzeko tresna."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Sare-interfazea"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sare-moldagailu konfiguratu bakarra dago zure sisteman:\n"
-"\n"
-"%s\n"
-"\n"
-"Zure sare lokala moldagailu horrekin konfiguratzera noa."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Aukeratu zein sare-moldagailu konektatuko den zure sare lokalarekin."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Sareko interfazea konfiguratuta dago"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Kontuz, sare-moldagailua (%s) jadanik konfiguratuta dago.\n"
-"\n"
-"Automatikoki birkonfiguratu nahi duzu?\n"
-"\n"
-"Eskuz egin dezakezu, baldin eta zertan zabiltzan badakizu."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Birkonfigurazio automatikoa"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Erakutsi uneko interfaze-konfigurazioa"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"`%s' - uneko konfigurazioa:\n"
-"\n"
-"Sarea: %s\n"
-"IP helbidea: %s\n"
-"IP atribuzioa: %s\n"
-"Kontrolatzailea: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Uneko konfigurazioa gorde eta DHCP zerbitzari bat konfiguratuta duzula "
-"pentsa dezaket; hala bada, ziurtatu ondo irakurri dudala sare lokalerako "
-"erabiltzen duzun C klaseko sarea; ez dut birkonfiguratuko eta ez dut ukituko "
-"zure DHCP zerbitzariaren konfigurazioa.\n"
-"\n"
-"Gainera, zure interfazea eta DHCP zerbitzaria (bir)konfigura ditzaket.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C klaseko sare lokala"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "DHCP zerbitzariaren IPa"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Birkonfiguratu interfazea eta DHCP zerbitzaria"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Sare lokalak ez du `.0' amaieran; irteten. "
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"LAN helbide-gatazka potentziala aurkitu da %s(r)en uneko konfigurazioan!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Suebaki-konfigurazioa detektatu da!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Kontuz! Lehendik dagoen suebaki-konfigurazio bat detektatu da. Beharbada "
-"eskuz konponketa batzuk egin beharko dituzu instalazioaren ondoren."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfiguratzen..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Script-ak konfiguratzen, softwarea instalatzen, zerbitzariak abiarazten..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Arazoa %s paketea instalatzean"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Dena konfiguratu da.\n"
-"Orain Interneteko konexioa konparti dezakezu sare lokaleko beste ordenagailu "
-"batzuekin, sare-konfigurazio automatikoa (DHCP) erabiliz."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurazioa eginda dago, baina orain desgaituta dago."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurazioa eginda dago, eta orain gaituta dago."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneteko konexioa konpartitzea ez da inoiz konfiguratu."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Interneteko konexioa konpartitzeko konfigurazioa"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ongi etorri Interneteko konexioa konpartitzeko utilitatera!\n"
-"\n"
-"%s\n"
-"\n"
-"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Sare-konfigurazioa (%d moldagailuak)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profila: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Ezabatu profila..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Ezabatu beharreko profila:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Profil berria..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Sortu beharreko profilaren izena (profil berria oraingoaren kopia gisa "
-"sortuko da) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ostalari-izena: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Interneterako sarbidea"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Mota:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Atebidea:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfazea:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Egoera:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Itxaron"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfiguratu Interneterako sarbidea..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Sare lokalaren konfigurazioa (LAN)"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Kontrolatzailea"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfazea"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoloa"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Egoera"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfiguratu sare lokala..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Egin klik hemen morroia abiarazteko ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Morroia..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplikatu"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Itxaron... Konfigurazioa aplikatzen"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektatuta"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Konektatu gabe"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektatu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Deskonektatu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Kontuz, beste Internet konexio bat detektatu da, agian zure sarea erabiltzen "
-"ariko da"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Ez duzu interfaze konfiguraturik.\n"
-"Konfigura itzazu lehendabizi, 'Konfiguratu'n klik eginda"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Sare lokalaren konfigurazioa (LAN)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s moldagailua: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Abioko protokoloa"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Abioan abiaraztekoa"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP bezeroa"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktibatu orain"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "desaktibatu orain"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfaze hau ez dago konfiguratuta.\n"
-"Abiarazi konfigurazio-morroia leiho nagusian"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Ez duzu Interneteko konexiorik.\n"
-"Sortu bat lehendabizi, 'Konfiguratu'n klik eginda"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Interneteko konexioaren konfigurazioa"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Interneteko konexioaren konfigurazioa"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Konexio-mota: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametroak"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Atebidea"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet txartela"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP bezeroa"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Segurtasun-maila ezartzen"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrol Zentroa"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Aukeratu erabili nahi duzun tresna"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kablea)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "AEB (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "AEB (kablea)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "AEB (kablea-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Txina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonia (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonia (kablea)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europa Ekialdea"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europa Mendebaldea"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Zeelanda Berria"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Hegoafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Idatzi\n"
-"zure TB araua eta estatua"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TB araua :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "TB kanalak bilatzen..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "TB kanalak bilatzen"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "erabilera: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Aukeratu zure teklatu-diseinua."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Atzera-teklak Ezabatu itzultzea nahi duzu kontsolan?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Aldatu CDROMa"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Sartu instalazioko CDROMa unitatean eta sakatu Ados.\n"
-"Ez baduzu, sakatu Utzi bertsio-berritzea saihesteko."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ezin da bertsio-berritzea abiarazi!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Aldaketa egin da, baina, eragina izan dezan, saioa amaitu behar duzu"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Erakutsi bakarrik hautatutako egunerako"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fitxategia/_Berria"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fitxategia/_Ireki"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fitxategia/_Gorde"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fitxategia/Gorde _honela"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fitxategia/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Aukerak"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Aukerak/Probatu"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Laguntza"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Laguntza/_Honi buruz..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Erabiltzailea"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Mezuak"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake Tools-en azalpenak"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "bilatu"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Zure erregistroak ikusteko tresna"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Ezarpenak"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "bat badatoz"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "bat ez badatoz"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Aukeratu fitxategia"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Egutegia"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Fitxategiaren edukia"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Posta/SMSren abisua"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "itxaron, fitxategia analizatzen: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Posta/SMSren abisuaren konfigurazioa"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Ongi etorri Posta/SMS konfiguratzeko utilitatera.\n"
-"\n"
-"Hemen zure abisu-sistema konfiguratu ahal izango duzu.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "zerbitzuaren ezarpena"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Hautatutako zerbitzuetakoren bat martxan ez badago, abisua jasoko duzu"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "kargatzeko ezarpenak"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Karga balio hau baino handiagoa bada, abisua jasoko duzu"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "abisu-konfigurazioa"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Konfiguratu abisuak jasotzeko modua"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gorde honela.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Aukeratu sagu-mota."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ez da serieko USBrik aurkitu\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Hirugarren botoia emulatu?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s aurkitu da hemen: %s. Konfiguratu nahi duzu ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Hautatu eskaner bat"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "%s eskaner hori ez da onartzen"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Abioko gailua"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"%s eskaner hau printerdrake-rekin konfiguratu behar da.\n"
-"Mandrake Kontrol Zentroko Hardwarearen ataletik abiaraz dezakezu "
-"printerdrake."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Suebakiaren konfigurazioa"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Suebakiaren konfigurazioa"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Suebakia\n"
-"\n"
-"Jadanik konfiguratu duzu suebaki bat.\n"
-"Suebakia aldatzeko edo kentzeko, egin klik 'Konfiguratu'n"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Suebakia\n"
-"\n"
-"Suebaki estandar bat konfiguratzeko, egin klik 'Konfiguratu'n"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Aukeratu hizkuntza"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Hautatu instalazio-klasea"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Disko gogorren detekzioa"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguratu sagua"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Aukeratu teklatua"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Segurtasuna"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Ezarri fitxategi-sistemak"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Eman formatua partizioei"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Aukeratu instalatu beharreko paketeak"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalatu sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Gehitu erabiltzaile bat"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguratu sarea"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguratu zerbitzuak"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalatu abioko kargatzailea"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Sortu abioko disko bat"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguratu X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instalatu sistema-eguneratzeak"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Irten instalaziotik"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfiguratzailea\n"
-"\n"
-"Mandrake Linux makina honetarako suebaki pertsonala konfiguratzen du.\n"
-"Suebaki ahaltsuagoa nahi baduzu, begiratu MandrakeSecurity Firewall \n"
-"banaketa espezializatua."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Orain galdera batzuk egingo dizkizugu, Interneteko zein zerbitzutara \n"
-"konektatu nahi duzun jakiteko.  Ongi pentsatu erantzun aurretik, \n"
-"zure ordenagailuaren segurtasuna garrantzitsua baita.\n"
-"\n"
-"Horietako zerbitzuren bat erabiltzen ez baduzu, desaktiba\n"
-"ezazu.  Konfigurazio hau nahi duzunean alda dezakezu,\n"
-"aplikazio hau berriro exekutatuz!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Internet osotik ikusi behar den web zerbitzari bat daukazu martxan\n"
-"makina honetan? Makina honetatik bakarrik erabili behar den web zerbitzari\n"
-"bat badaukazu, lasai erantzun dezakezu EZ hemen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Izen-zerbitzari bat erabiltzen duzu makina honetan? Izen-zerbitzaririk ez \n"
-"badaukazu ezarrita IP eta zonako informazioa emateko Internet osorako,\n"
-"erantzun EZ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Secure Shell (ssh) konexioei sartzeko baimena eman nahi diezu? \n"
-"Telnet-en ordezkoa da, urruneko makinetan sartzeko erabil dezakezuna. \n"
-"telnet erabiltzen baduzu, ssh-ra aldatu behar duzu zalantzarik gabe. \n"
-"telnet ez dago enkriptatuta - hortaz, erasotzaileek zure pasahitza lapur \n"
-"dezakete. ssh enkriptatuta dago eta beraz ezin da harrapatu."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"telnet konexioei sartzen utzi nahi diezu?\n"
-"Hori ez da batere batere segurua, aurreko pantailan azaldu dugunez. \n"
-"Biziki gomendatzen dugu hemen EZ erantzutea eta telnet-en ordez ssh\n"
-"erabiltzea.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Internetetik ikusi behar den FTP zerbitzaririk erabiltzen duzu?\n"
-"Horrela bada, biziki gomendatzen dizugu transferentzia anonimoetarako\n"
-"bakarrik erabiltzea. FTP bidez bidalitako pasahitzak lapurtu egin "
-"ditzakete,\n"
-"FTPk ere ez baitu enkriptatzerik erabiltzen pasahitzak transferitzeko.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Posta-zerbitzaririk baduzu martxan hemen? Mezuak pine, mutt edo\n"
-"testuan oinarritutako beste posta-bezeroren baten bidez bidaltzen\n"
-"badituzu, ziur aski izango duzu.  Bestela, desaktibatzea komeni da.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP edo IMAP zerbitzaririk baduzu hemen? \n"
-"Web-ean oinarritu gabeko posta-kontuen ostalari izateko \n"
-"erabiltzen da hau.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Badirudi 2.2 bertsioko nukleoa erabiltzen duzula.  Zure sarearen \n"
-"IP helbidea automatikoki ezartzen badu zure etxeko edo \n"
-"bulegoko ordenagailu batek (dinamikoki esleituta), onartu \n"
-"egin beharko dugu.  Horrela da?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Zure ordenagailua beste batekin sinkronizatuta dabil?\n"
-"Nagusiki, hori Unix/Linux antolamendu ertain eta handiek \n"
-"erabiltzen dute, konexio-orduak sinkronizatzeko eta   horrelakoetarako. "
-"Bulego handi batean ari ez bazara eta \n"
-"honelako konturik entzun ez baduzu, ziur aski ez zara\n"
-"inorekin sinkronizatuta egongo."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurazioa osatu da.  Diskoan idatziko ditugu aldaketak?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ezin da %s ireki: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ezin da %s idazteko ireki: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ez, ez dut DHCP behar"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Bai, DHCP behar dut"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ez, ez dut NTP behar"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Bai, NTP behar dut"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Ez gorde"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Gorde eta irten"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Suebakia konfiguratzeko morroia"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ez (egin suebakia Internetetik)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Bai (onartu hau suebakian zehar)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Itxaron... instalatutako paketeak egiaztatzen"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Huts egin du beharrezko pakete hauek instalatzean: %s eta Bastille.\n"
-" Saiatu eskuz instalatzen."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sare-ordenagailua (bezeroa)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS zerbitzaria, SMB zerbitzaria, Proxy zerbitzaria, ssh zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-ren lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot edo Visor-erako tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Suebakia/Bidatzailea"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinu-izenen eta sareko informazioaren zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Bulego-lanetako programak: testu-prozesadoreak (kword, abiword), kalkulu-"
-"orriak (kspread, gnumeric), pdf ikustaileak, etab."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio tresnak: mp3 edo midi erreproduzigailuak, nahastaileak, etab."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linux eta Software libreari buruzko liburuak eta azalpenak"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etab."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Bideoa"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Posta, berriak, web-a, fitxategi-transferentzia eta berriketa kudeatzeko "
-"tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Datu-basea"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL edo MySQL datu-baseen zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Zure ordenagailuaren konfigurazioa errazteko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Soinua"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitateak"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentazioa"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Kontsola-tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix posta-zerbitzaria, Inn berri-zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneteko estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediako estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurazioa"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mahaigain grafiko gehiago (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE, K Desktop Environment, hainbat tresna duen oinarrizko ingurune grafikoa."
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ingurune grafikoa"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CDak sortzeko eta grabatzeko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Bulegoko lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etab."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "The Gimp bezalako programa grafikoak"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C eta C++ garapen-liburutegiak, programak eta fitxategiak"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sare-zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Posta/Groupware/Berriak"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Joko-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Bideo-erreproduzigailuak eta editoreak"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikoak"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Denbora-pasako programak: makina-jokoak, taula-jokoak, estrategiakoak, etab."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Posta eta berriak irakurtzeko eta bidaltzeko (pine, mutt, tin..) eta web-a "
-"arakatzeko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Artxibatzea, emulatzaileak, monitorizatzea"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finantza pertsonalak"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Aplikazio-multzo eta mahaigaineko tresna lagungarri eta atseginak dituen "
-"ingurune grafikoa"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Hainbat protokolotako bezeroak, ssh-renak barne"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Interneteko atebidea"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Soinua eta bideoa jotzeko/editatzeko programak"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Beste mahaigain grafiko batzuk"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoreak, shell-ak, fitxategi-tresnak, terminalak"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Zure finantzak kudeatzeko programak, hala nola gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Informazio pertsonalaren kudeaketa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD grabatzea"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Lan-estazio zientifikoa"
diff --git a/perl-install/share/po/fake_c.pl b/perl-install/share/po/fake_c.pl
deleted file mode 100755
index 21cf25b04..000000000
--- a/perl-install/share/po/fake_c.pl
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/usr/bin/perl -lp
-
-s|^(__?\()| $1|;		# add a blank at the beginning (?!)
-
-s|_\(\[(.*),\s*(.*),\s*(.*)\]|ngettext($2,$3,$1)|; # special plural form handling
-
-s,\Qs/#.*//,,;			# ugly special case
-
-s,(^|[^\$])#([^+].*),"$1/*" . simpl($2) . "*/",e; 
-                                # rewrite comments to C format except for:
-                                # - ``#+ xxx'' comments which are kept
-                                # - ``$#xxx'' which are not comments
-
-s|//|/""/|g;			# ensure // or not understood as comments
-
-s|$|\\n\\|;			# multi-line strings not handled in C
-
-sub simpl {
-    local $_ = $_[0];
-    s,\*/,,g;
-    $_;
-}
diff --git a/perl-install/share/po/fi.po b/perl-install/share/po/fi.po
deleted file mode 100644
index a3cc4183d..000000000
--- a/perl-install/share/po/fi.po
+++ /dev/null
@@ -1,11489 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999, 2002 Mandrakesoft
-# Kim Enkovaara <kim.enkovaara@iki.fi>, 1999, 2000
-# Matias Griese <mahagr@utu.fi>, 2001, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-20 22:55EET\n"
-"Last-Translator: Matias Griese <mahagr@utu.fi>\n"
-"Language-Team: Finnish\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Aseta kaikki näytöt erikseen"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Käytä Xinerama-laajennusta"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Määrittele vain kortin \"%s\" (%s) asetukset"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Monen näytön asettaminen"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Järjestelmäsi tukee monen näytön laitteistokokoonpanoa.\n"
-"Mitä haluat tehdä?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Näytönohjain"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Valitse näytönohjain"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Valitse X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Valitse X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Mitä versiota XFree-serveristä haluat käyttää?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"Korttisi on tuettu myös XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s laitteistokiihdytetyllä 3D-tuella"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa.\n"
-"HUOMAA, ETTÄ TUKI ON KOKEELLINEN JA VOI JUMITTAA TIETOKONEESI."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s KOKEELLISELLA laitteistokiihdytetyllä 3D-tuella"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"HUOMAA, ETTÄ TUKI ON KOKEELLINEN JA VOI JUMITTAA TIETOKONEESI.Korttisi on "
-"tuettu myös XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (näytönohjaimen ajurin asennus)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFreen asentaminen"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Valitse näytönohjaimen muistin määrä"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Valitse optioita palvelimelle"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Valitse monitori"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Näyttö"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Sinun tulee valita vaakavirkistystaajuus näytöllesi. Voit joko valita "
-"jonkin\n"
-"allaolevista alueista, jotka vastaavat teollisuusstandardityyppejä tai "
-"syöttää\n"
-"jonkin muun alueen.\n"
-"\n"
-"On HYVIN TÄRKEÄÄ, että et valitse näyttötyyppiä, jonka "
-"vaakavirkistystaajuus\n"
-"on suurempi kuin oman näyttösi. Jos epäröit, valitse pienempi taajuus."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Vaakavirkistystaajuus"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Pystyvirkistystaajuus"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Näyttöä ei ole asetettu"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Näytönohjainta ei ole vielä asetettu"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Näytön resoluutiota ei ole vielä valittu"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Haluatko kokeilla asetuksia?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varoitus: näytönohjaimesi testaaminen voi jumittaa tietokoneen"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Kokeile asetuksia"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"kokeile joidenkin parametrien muuttamista"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tapahtui virhe:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Lopetan %d sekunnissa"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Onko tämä oikea asetus?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tapahtui virhe, kokeile joidenkin parametrien vaihtamista"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resoluutio"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Valitse resoluutio ja värisyvyys"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Näytönohjain: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 palvelin: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Lisäasetukset"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Asiantuntijatila"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Näytä kaikki"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluutiot"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Näppäinasettelu: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiiren tyyppi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiiren laite: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Näyttö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Näytön vaakajuovataajuus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Näytön virkistystaajuus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Näytönohjain: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Näytönohjaimen tunniste: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafiikkamuisti: %s kt\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Värisyvyys: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluutio: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 palvelin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ajurit: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Valmistelen X-Windowin asetuksia"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mitä haluat tehdä?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Vaihda näyttöä"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Vaihda näytönohjainta"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Vaihda palvelimen optioita"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Vaihda resoluutiota"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Näytä tiedot"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Kokeile uudelleen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Lopeta"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Säilytä muutokset?\n"
-"Nykyiset asetukset ovat:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Käynnistettäessä X:ää"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"X voidaan laittaa käynnistymään automaattisesti käynnistyksen yhteydessä.\n"
-"Haluatko käynnistää X:n automaattisesti?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Kirjaudu uudelleen %s:een aktivoidaksesi muutokset"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Kirjaudu ulos ja kirjoita sitten Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 väriä (8 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhatta väriä (15 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhatta väriä (16 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoonaa väriä (24 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardia väriä (32 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kt"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kt"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mt tai enemmän"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Perus-VGA,  640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "SVGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-yhteensopiva, 1024x768 @ 87 Hz lomitettu (ei 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768 @ 87 Hz lomitettu, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Laajennettu SVGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Lomittamaton SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Korkeataajuuksinen SVGA, 1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Näyttö, joka pystyy 1600x1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Näyttö, joka pystyy 1600x1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Ensimmäinen sektori käynnistysosiolla"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Levyn ensimmäinen sektori (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILOn asennus"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Minne haluat asentaa käyttöjärjestelmän lataajan?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub asennus"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO tekstipohjaisella valikolla"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO graafisella valikolla"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Käynnistä DOSista/Windowsista (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Käyttöjärjestelmän lataajan pääasetukset"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Käytettävä käyttöjärjestelmän lataaja"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Käyttöjärjestelmän lataajan asennus"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Käynnistyslaite"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ei toimi vanhoissa BIOSeissa)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Tiivis"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "tiivis"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Näyttötila"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Tauko ennen oletusjärjestelmän käynnistystä"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Salasana"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Salasana (uudelleen)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Rajoita komentorivioptioita"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "rajoita"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Tyhjennä /tmp jokaisella käynnistyskerralla"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tarkka muistin koko, jos tarpeen (löydettiin %d Mt)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Käytä montaa profiilia"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Anna muistin koko megatavuina"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Asetus ``Rajoita komentorivioptioita'' ei ole hyödyllinen ilman salasanaa"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Yritä uudelleen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Salasanat poikkeavat toisistaan"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Käynnistysviesti"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Vapaa Firmware-viive"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Timeout ytimen käynnistyksessä"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Mahdollista käynnistys CD:ltä"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Mahdollista käynnistys OFilta"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Oletuskäyttöjärjestelmä?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tässä ovat asetustietueet.\n"
-"Voit lisätä uusia tai muuttaa olemassaolevia."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Lisää"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Valmis"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Muokkaa"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Minkä tyyppisen tietueen haluat lisätä"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Muu käyttöjärjestelmä (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Muu käyttöjärjestelmä (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Muu käyttöjärjestelmä (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kuva"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Juuri"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Liitä"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Luku-kirjoitus"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taulukko"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Turvaton"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Otsikko"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Oletus"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd:n koko"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Ei Näyttöä"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Poista tietue"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tyhjää otsikkoa ei sallita"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Sinun täytyy määritellä ydin"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Sinulla täytyy määritellä juuriosio"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Otsikko on jo käytössä"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Löysin %s %s liitännät"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Onko sinulla muita?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Onko koneessa %s liityntää?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Kyllä"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Katso laitteistotietoja"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Asetan ajuria %s ohjaimelle %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(moduli %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Mitä %s-ajuria kokeillaan?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Joissakin tapauksissa %s-ajuri tarvitsee lisätietoja toimiakseen kunnolla,\n"
-"joskin tavallisesti se toimii hyvin ilmankin. Haluaisitko antaa ajurille\n"
-"lisämääreitä vai annatko sen itse etsiä tarvitsemansa tiedot? Joskus haku\n"
-"voi jumittaa tietokoneen, mutta se ei aiheuta vahinkoa."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automaattihaku"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Lisäasetukset"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Voit antaa lisäasetuksia modulille %s.\n"
-"Asetukset ovat muotoa ``nimi=arvo nimi2=arvo2 ...''.\n"
-"Esimerkiksi, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Moduulin optiot:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulin %s lataaminen epäonnistui.\n"
-"Haluatko yrittää muilla asetuksilla?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "oikeudet X-ohjelmille"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "oikeudet rpm-työkaluihin"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "salli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "oikeudet ylläpidollisiin tiedostoihin"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(lisätty jo %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Salasana on liian yksinkertainen"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Anna käyttäjätunnus"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Käyttäjätunnus saa sisältää vain pieniä kirjaimia, numeroita, `-' ja `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Käyttäjätunnus on jo lisätty"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Lisää käyttäjä"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Lisää käyttäjä\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Hyväksy käyttäjä"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Oikea nimi"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Käyttäjätunnus"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Komentotulkki"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Kuvake"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automaattinen kirjautuminen"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Yksi käyttäjä voidaan asettaa kirjautumaan automaattisesti sisään "
-"tietokoneellesi.\n"
-"Haluatko käyttää tätä ominaisuutta?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Valitse oletuskäyttäjä:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Valitse käytettävä ikkunointijärjestelmä:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Valitse käytettävä kieli."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Voit valita kielet jotka ovat käytettävissä asennuksen jälkeen"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Kaikki"
-
-# Asennuksen sivuvalikko
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Salli kaikille käyttäjille"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Mukautettu"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ei jaettu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paketti %s pitää asentaa. Haluatko asentaa sen?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Voit jakaa sekä NFS:llä että Samballa. Kumpaa haluat käyttää"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Pakollinen paketti %s puuttuu"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Peruuta"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Tervetuloa murtautujat"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Huono"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardi"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Korkea"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Korkea"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidi"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Tätä tasoa tulee käyttää varoen. Se tekee järjestelmästäsi helpomman "
-"käyttää,\n"
-"mutta hyvin herkän: sitä ei tule käyttää koneessa joka on kytketty muihin "
-"koneisiin\n"
-"tai Internettiin. Koneessa ei ole salasanoja."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salasanat ovat nyt käytössä mutta koneen käyttö verkossa ei ole suositeltua."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Tämä on normaaliturvallisuustaso jota suositellaan tietokoneelle jota\n"
-"käytetään Internettiin liitettynä. Järjestelmässä on "
-"turvallisuustarkastuksia."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Tällä turvallisuustasolla järjestelmän käyttö palvelimena on mahdollista.\n"
-"Järjestelmää voidaan käyttää palvelimena joka hyväksyy yhteyksiä monilta\n"
-"asiakkailta. "
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Pohjautuu edelliseen tasoon, mutta järjestelmä on kokonaan suljettu.\n"
-"Turvallisuusasetukset ovat tiukimmillaan."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Valitse turvataso"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Turvataso"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Käytä libsafea palvelimille"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Kirjasto joka suojelee puskurin ylivuoto ja merkkijonon muotovirhehykkäyksiä "
-"vastaan."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Tervetuloa %s kayttojarjestelmanvalitsijaan!\n"
-"\n"
-"Valitse k~^Dytt~^Tj~^Drjestelm~^D yll~^D olevasta listasta tai\n"
-"odota %d sekuntia oletusk~^Dynnistyst~^D.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tervetuloa GRUB k~^Dytt~^Tj~^Drjestelm~^Dnvalitsijaan!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kayt~^D %c- ja %c-napp~^Dimi~^D valitaksesi korostetun tietueen"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Paina enter kaynnist~^D~^Dksesi valitun kaytt”j„rjestelm„n, 'e' muokataksesi"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komennot ennen k„ynnistyst„, tai 'c' komentoriville"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Korostettu tietue k„ynnistet„„n automaattisesti %d sekunnissa."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "ei tarpeeksi tilaa /boot-hakemistossa"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Työpöytä"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Käynnistysvalikko"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Et voi asentaa käyttöjärjestelmän lataajaa partitiolle %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ohjeita ei ole vielä olemassa.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Käynnistyksen tavan asetus"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Tiedosto"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Tiedosto/_Poistu"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Uuden tyylin kategoroiva tarkkailija"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Uuden tyylin tarkkailija"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Perinteinen tarkkailija"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Perinteinen Gtk+ tarkkailija"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Käytä Auroraa käynnistyksen aikana"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub-tila"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot-tila"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Tällä hetkellä käytössä oleva järjestelmälataaja on %s.\n"
-"Valitse Aseta käynnistääksesi asennusohjelman."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Määrittele"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Järjestelmän tila"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Käytä X-Window-järjestelmää"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ei, en halua autologinia"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Kyllä, haluan autologinin (käyttäjä, ympäristö)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ei voi lukea tiedostoa /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Gt"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Kt"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mt"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "Tt"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuuttia"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuutti"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekuntia"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kuvankaappauksia ei voi tehdä ennen osiointia"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Kuvankaappaukset löytyvät asennuksen jälkeen hakemistosta %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ranska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "T'sekin tasavalta"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Saksa"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Kreikka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norja"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Ruotsi"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Alankomaat"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Itävalta"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Yhdysvallat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Tee ensin varmuuskopio tiedoistasi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lue tarkkaan!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jos aiot käyttää aboot:ia, varmista että jätät vapaata tilaa levyn alkuun\n"
-"(2048 sektoria on tarpeeksi)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Virhe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Velho"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Valitse toiminta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sinulla on yksi suuri FAT-osio.\n"
-"(Yleensä Microsoft DOS/Windowsin käytössä).\n"
-"Ehdotus: muuta ensimmäiseksi osion kokoa\n"
-"(klikkaa osiota ja valitse sitten \"Uusi koko\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klikkaa osiota"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Yksityiskohdat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journaloitu FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tyhjä"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Muut"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tiedostojärjestelmien tyypit:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Luo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tyyppi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Käytä sen sijaan ``%s'':ää"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Poista"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Käytä ensin komentoa ``Irroita''"
-
-# mat
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Vaihdettuasi osion %s tyyppiä kaikki sillä olevat tiedot häviävät"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Valitse osio"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Valitse toinen osio"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Poistu"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Vaihda asiantuntijatilaan"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Vaihda normaalitilaan"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Peruuta"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jatka joka tapauksessa?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Lopeta tallentamatta"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Lopeta kirjoittamatta osiotalua?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Haluatko tallentaa muutokset tiedostoon /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automaattinen varaus"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Tyhjennä kaikki"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Kiintolevyn tiedot"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Kaikki primääriosiot käytetty"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Uusia osioita ei voida lisätä"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Voidaksesi luoda lisää osioita tuhoa yksi olemassaoleva osio jotta voisit "
-"luoda laajennetun osion"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Tallenna osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Palauta osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Pelasta osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Uudelleenlataa osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Vaihdettavan median automaattinen liittäminen"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Valitse tiedosto"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Osiotaulun varmuuskopio ei ole saman kokoinen\n"
-"Jatka silti?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varoitus"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Aseta levyke asemaan\n"
-"Kaikki levykkeen tiedot häviävät"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Yritän osiotalulun palautusta"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Yksityiskohtaiset tiedot"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Liitospaikka"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Optiot"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Uusi koko"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Siirrä"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Alusta"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Liitä"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Lisää RAIDiin"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Lisää LVM:iin"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Irroita"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Poista RAIDista"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Poista LVM:stä"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Muokkaa RAIDia"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Käytä loopback-tiedostoa"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Luo uusi osio"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Aloitussektori: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Koko Mt: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tiedostojärjestelmä: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Liitospaikka: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Etuoikeus: "
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Poista loopback-tiedosto?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Muuta osiotyyppiä"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Minkä tiedostojärjestelmän haluat?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Vaihdan ext2:sta ext3:een"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Minne haluat liittää loopback-tiedoston %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Minne haluat liittää laitteen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ei voida poistaa liitospaikkaa koska osiota käytetään loopback-tilassa.\n"
-"Poista loopback-tiedosto ensin"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Lasken FAT-tiedostojärjestelmän rajoja"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Muutan kokoa"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Tämän osion kokoa ei voi muuttaa"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Kaikki osion tiedot tulee varmuuskopioida"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Osion %s koon muuttamisen jälkeen kaikki osion tiedot tuhoutuvat"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Valitse uusi koko"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Uusi koko (Mt): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Mille levylle haluat siirtää?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektori"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Mille sektorille haluat siirtää?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Siirrän"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Siirrän osiota..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Valitse olemassaoleva RAID johon lisätään"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "uusi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Valitse olemassaoleva LVM johon lisätään"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM:n nimi?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Osiota ei voida käyttää loopback-osiona"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback tiedostonimi: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Anna tiedostonimi"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Tiedosto on jo käytössä toiselle loopbackille, valitse toinen"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Tiedosto on jo olemassa. Käytä sitä?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Liittämisen optiot"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Useita"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "laite"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "taso"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "palan koko"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Varo: tämä on vaarallinen toiminto"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Minkä tyyppinen osiointi?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"/boot hakemistoa ei voida luoda näin kauas levyn alusta (sylinterille joka "
-"on > 1024).\n"
-"Joko käytät LILOa ja se ei toimi, tai et käytä LILOa, jolloin et tarvitse /"
-"boot -hakemistoa"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Osio jolle valitsit juuren (/) on fyysisesti yli 1024 sylinterin levyllä,\n"
-"eikä sinulla ole /boot osiota.\n"
-"Jos haluat käyttää LILO-käynnistyksenhallintaa, lisää Linuxille /boot osio."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Olet valinnut ohjelmallisen RAID-osion juuriosioksi (/).\n"
-"Mikään käynnistyslataaja ei osaa käsitellä tätä ilman /boot -osiota.\n"
-"Lisää /boot -osio, jos haluat käyttää liloa tai grubia"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Levyn %s osiotaulu kirjotetaan levylle!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Sinun täytyy käynnistää kone uudelleen ennen kuin muutos tulee voimaan"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kaikki osiolla %s olevat tiedot häviävät osion alustuksen yhteydessä"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Alustan"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Alustan loopback-osiota %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Alustan osiota %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Piilota tiedostot"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Siirrä tiedostot uuteen osioon"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Hakemisto %s sisältää jo jotakin tietoa\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Siirrän tiedostoja uudelle osiolle"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopioidaan %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Poistetaan %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "osio %s tunnetaan nyt nimellä %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Laite: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-asema: %s (vain arvaus)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tyyppi: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nimi: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Alkaa: sektori %s\n"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Koko: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoria"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sylinteristä %d sylinteriin %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Alustettu\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ei alustettu\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Liitetty\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback tiedosto(t):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Osiolta käynnistetään oletuksena\n"
-"    (MS-DOS käynnistys, ei lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Taso %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Palan koko %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-levyt %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-tiedoston nimi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"On mahdollista, että tämä osio on\n"
-"ajuriosio. Sinun olisi kaiketi\n"
-"parasta jättää se rauhaan.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tämä erityinen Bootsrap-\n"
-"osio on järjestelmäsi\n"
-"kaksoiskäynnistämiseksi.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Koko: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s sylinteriä, %s lukupäätä, %s sektoria\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Tietoja: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-levyt %s\n"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Osion tyyppi: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "väylässä %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Optiot: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Tiedostojärjestelmän salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Valitse tiedostojärjestelmäsi salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Salausavain on liian yksinkertainen (sen pitää olla ainakin %d merkkiä pitkä)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Salausavaimet eivät täsmää"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Salausavain (uudelleen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Muuta tyyppiä"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klikkaa mediaa"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Hae palvelimet"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s:n alustus %s:ta epäonnistui"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "en osaa alustaa %s:ää tyyppiä %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck epäonnistui virhekoodilla %d tai signaalilla %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "virhe irroitettaessa %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "yksinkertainen"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "palvelin"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Et voi käyttää JFS:ää alle 16 Mt osioilla"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Et voi käyttää ReiserFS:ää alle 32 Mt osioilla"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Liitospaikan pitää alkaa /-merkillä."
-
-# mat
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "On jo olemassa osio, jonka liitospaikka on %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Et voi käyttää LVM loogista taltiota liitekohtana %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Tämän hakemiston pitäisi olla juuritiedostojärjestelmässä"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Tarvitset tähän liitoskohtaan oikean tiedostojärjestelmän (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Et voi käyttää salattua tiedostojärjestelmää liitoskohdassa %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Vapaa tila ei riitä automaattiseen varaukseen"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ei mitään tekemistä"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"On tapahtunut virhe - ei löytynyt ainuttakaan laitetta, joille voi luoda "
-"uuden tiedostojärjestelmän. Tarkista laitteistosi korjataksesi ongelman"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Sinulla ei ole yhtään osiota!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yllä olevassa listassa ovat kiintolevyiltä löytyneet Linux-osiot. Voit pitää "
-"velhon \n"
-"tekemät valinnat, sillä ne sopivat useimpiin asennuksiin. Jos teet "
-"muutoksia,\n"
-"sinun täytyy määritellä vähintään juuriosio (\"/\"). Älä valitse juureksi "
-"liian pientä \n"
-"osiota, sillä silloin kaikkia ohjelmia ei voida asentaa. Jos haluat "
-"tallettaa tiedot \n"
-"erilliselle osiolle, sinun täytyy luoda oma osio myös \"/home\"-"
-"hakemistolle \n"
-"(mikä on mahdollista vain, jos sinulla on enemmän kuin yksi Linux-osio).\n"
-"\n"
-"Jokaisesta osiosta on listattu seuraavat tiedot: \"Nimi\", \"Kapasiteetti"
-"\".\n"
-"\n"
-"\"Nimi\"-kohdan rakenne on: \"Kiintolevyn tyyppi\",  \"Kiintolevyn numero"
-"\",\n"
-"\"Osion numero\" (esimerkiksi \"hda1\").\n"
-"\n"
-"\"Kiintolevyn tyyppi\" on \"hd\", jos kiintolevysi on IDE-levy, ja \"sd\", "
-"jos \n"
-"se on SCSI-levy.\n"
-"\n"
-"\"Kiintolevyn numero\" on aina kirjain heti \"hd\":n tai \"sd\":n jälkeen. \n"
-"IDE-asemilla:\n"
-"\n"
-"   * \"a\" tarkoittaa \"herraksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"b\" tarkoittaa \"orjaksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"c\" tarkoittaa \"herraksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"d\" tarkoittaa \"orjaksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"SCSI-levyillä \"a\" tarkoittaa \"pienin SCSI ID\", \"b\" taas \"toiseksi "
-"pienin \n"
-"SCSI ID\", jne..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linuxin asennus koostuu useasta CD-ROM-levystä. DrakX\n"
-"tietää, onko valittu paketti toisella CD:llä ja osaa tarvittaessa syöttää\n"
-"nykyisen levyn ulos ja kysyä oikeaa."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Voit nyt valita mitkä palvelut haluat käynnistää konetta käynnistettäessä.\n"
-"\n"
-"Tässä on lista kaikista palveluista, jotka löytyvät nykyisestä "
-"asennuksesta.\n"
-"Käy lista läpi huolellisesti ja poista kaikki ne palvelut, joita ei tarvita "
-"jokaisella\n"
-"käynnistyskerralla.\n"
-"\n"
-"Saat kustakin palvelusta lyhyen kuvaustekstin valitsemalla sen. Jos et\n"
-"kuitenkaan ole varma palvelun hyödyllisyydestä, on yleensä varmempaa\n"
-"jättää se oletusarvoiseksi.\n"
-"\n"
-"!! Tässä vaiheessa sinun pitää olla erityisen huolellinen, jos aiot käyttää\n"
-"konettasi palvelimena: et varmaankaan halua käynnistää niitä palveluita,\n"
-"joita et tarvitse. Muista myös, että jotkin palvelut voivat olla "
-"vaarallisia,\n"
-"jos ne ovat aktivoituja palvelimessa. Yleensä kannattaa valita vain\n"
-"ne palvelut, joita todella tarvitaan.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Kun kokeilet ensimmäistä kertaa X:n asetuksiasi, et ole välttämättä kovin\n"
-"tyytyväinen sen näyttöön (ruutu on liian pieni, siirtynyt vasemmalle tai\n"
-"oikealle...). Vaikka X käynnistyisikin oikein, DrakX kysyy sinulta, "
-"sopivatko\n"
-"asetukset sinulle. Se ehdottaa myös myös muutoksia näyttämällä listan\n"
-"sen löytämistä voimassa olevista näyttötiloista, pyytäen sinua valitsemaan\n"
-"niistä yksi.\n"
-"\n"
-"Jos et millään saa X:ää toiminaan, kannattaa viimeisenä valita \"Vaihda\n"
-"näytönohjain\", sieltä \"Listaamaton kortti\", ja kun sinulta kysytään, "
-"minkä\n"
-"palvelimen haluat, valitse \"FBDev\". Tämä on vikasietoinen valinta, joka\n"
-"toimii kaikilla nykyaikaisilla näytönohjaimilla. Lopuksi valitse \"Testaa\n"
-"uudelleen\" varmistaaksesi toimimisen."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Lopuksi sinulta kysytään, haluatko käynnistyksessä graafisen rajapinnan.\n"
-"Huomaa, että kysymys esitetään vaikka et olisi testannut asetuksia.\n"
-"Haluat varmaankin vastata \"Ei\", jos koneesi on tarkoitettu palvelimeksi\n"
-"tai jos näytön asetus epäonnistui."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Tässä vaiheessa sinun pitää valita mihin haluat asentaa Mandrake Linux\n"
-"-käyttöjärjestelmän. Jos kiintolevysi on tyhjä tai olemassaoleva "
-"käyttöjärjestelmä\n"
-"käyttää kaiken siinä olevan tilan, sinun pitää osioida kiintolevysi. "
-"Yksinkertaistaen\n"
-"kiintolevyn osiointi koostuu levytilan jakamisesta loogisiin osiin tilan "
-"saamiseksi\n"
-"Mandrake Linux -järjestelmälle.\n"
-"\n"
-"Koska osiointiprosessin vaikutukset ovat tavallisesti peruuttamattomia, voi\n"
-"osiointi olla pelottavaa ja stressaavaa kokemattomalle käyttäjälle. Onneksi\n"
-"on olemassa velho, joka on tehty helpottamaan prosessia. Ennen kuin "
-"aloitat,\n"
-"käytä riittävästi aikaa ohjekirjan lukemiseen.\n"
-"\n"
-"Jos asennus on asiantuntijatilassa, pääset DiskDrakeen, Mandrake Linuxin\n"
-"osiointityökaluun, joka antaa sinun hienosäätää osioitasi. Katso tässä "
-"tapauksessa\n"
-"ohjekirjan DiskDrakea koskeva kappale. Voit myös käyttää asennuksen velhoa\n"
-"painamalla dialogin \"Velho\"-painiketta.\n"
-"\n"
-"Jos osiot on jo määritelty, joko edellisessä asennuksessa tai jonkin toisen\n"
-"osiointityökalun toimesta, voit yksinkertaisesti valita niistä ne, joihin "
-"haluat asentaa\n"
-"Linux-järjestelmäsi.\n"
-"\n"
-"Jos osioita ei ole vielä määritelty, sinun pitää luoda ne käyttämällä "
-"velhoa.\n"
-"Riippuen kiintolevyn asetuksista, on käytössä erilaisia vaihtoehtoja:\n"
-"\n"
-" * \"Käytä vapaa tila\": tämä vaihtoehto osioi automaattisesti tyhjät "
-"kovalevyt.\n"
-"Sinua ei vaivata päätäsi sen enempää.\n"
-"\n"
-" * \"Käytä olemassaolevaa osiota\": velho on löytänyt yhden tai useamman\n"
-"olemassaolevan Linux.osion kiintolevylläsi. Jos haluat käyttää niitä, "
-"valitse\n"
-"tämä vaihtoehto.\n"
-"\n"
-" * \"Käytä tyhjää tilaa Windows-osiossa\": Jos Microsoft Windows on "
-"asennettuna\n"
-"kiintolevyllesi ja se käyttää kaiken levyllä olevan tilan, sinun täytyy "
-"tehdä vapaata\n"
-"tilaa Linuxin tiedoille. Tehdäksesi sen, voit tuhota Microsoft Windowsin "
-"käyttämän\n"
-"osion ja tiedot (katso kohta \"Tyhjennä koko lavy\" tai \"Asiantuntijatila"
-"\") tai voit\n"
-"muuttaa Microsoft Windowsin käyttämän osion kokoa. Koon muuttaminen voidaan "
-"tehdä hävittämättä mitään levyllä olevista tiedoista. Tämä vaihtoehto on "
-"suositeltu,\n"
-"mikäli haluat käyttää sekä Mandrake Linuxia että Microsoft Windowsia "
-"samalla\n"
-"tietokoneella.\n"
-"\n"
-"    Ennen kuin valitset tämän vaihtoehdon, sinun tulee tietää, että "
-"Microsoft\n"
-"Windowsin käyttämän osion koko pienenee operaarion johdosta. Sinulla tulee\n"
-"siis olemaan nykyistä vähemmän tilaa uusien ohjelmien asentamiseen ja "
-"tietojen\n"
-"tallentamiseen Microsoft Windowsin alla.\n"
-"\n"
-" * \"Tyhjennä koko lavy\": jos haluat tuhota kaikki levyllä olevan tiedon "
-"sekä sillä\n"
-"olevat osiot ja asentaa Mandrake Linux -järjestelmän niiden tilalle, voit "
-"valita\n"
-"tämän vaihtoehdon. Ole varovainen, sillä et pysty enää palauttamaan levyn "
-"sisältöä\n"
-"ennalleen sen jälkeen, kun olet hyväksynyt toiminnon.\n"
-"\n"
-"   !! Jos valitset tämän vaihtoehdon, kaikki levylläsi oleva tieto "
-"tuhoutuu. !!\n"
-"\n"
-" * \"Poista Windows\": tämä yksinkertaisesti poistaa kaiken, mitä levyllä "
-"on, ja\n"
-"aloittaa puhtaasti osioimalla kaiken alusta alkaen. Kaikki levyllä oleva "
-"tieto tuhoutuu.\n"
-"\n"
-"   !! Jos valitset tämän vaihtoehdon, kaikki levylläsi oleva tieto "
-"tuhoutuu. !!\n"
-"\n"
-" * \"Asiantuntijatila\": jos haluat osioida kiintolevysi itse, voit valita "
-"tämän\n"
-"vaihtoehdon. Ole varovainen - tämä on tehokas, mutta vaarallinen valinta.\n"
-"Voit todella helposti menettää kaiken tiedon. Joten älä valitse tätä "
-"ratkaisua,\n"
-"ellet tiedä, mitä olet tekemässä."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Kaikki vasta määritellyt osiot täytyy alustaa käyttöä varten (alustaminen\n"
-"tarkoittaa tiedostojärjestelmän luontia).\n"
-"\n"
-"Samalla voit haluta alustaa uudelleen myös olemassaolevia osioita\n"
-"poistaaksesi kaiken niissä olevan tiedon. Jos haluat haluat tehdä niin,\n"
-"valitse myös ne osiot.\n"
-"\n"
-"Huomaa, että sinun ei ole pakko alustaa kaikkia jo olemassa olevia\n"
-"osioita. Sinun pitää alustaa ne osiot, joilla käyttöjärjestelmä\n"
-"sijaitsee (kuten \"/\", \"/usr\" ja \"/var\"), mutta voit säilyttää osiot,\n"
-"joilla henkilökohtaiset tiedostosi sijaitsevat (tavallisesti \"/home\").\n"
-"\n"
-"Ole huolellinen osioita valitessasi. Alustamisen jälkeen kaikki tieto\n"
-"valituilla osioilla on poissa eikä niiden palauttaminen enää onnistu.\n"
-"\n"
-"Valitse \"Ok\", kun olet valmis alustamaan osiot.\n"
-"\n"
-"Valitse \"Peruuta\", jos haluat valita toisen osion Mandrake Linuxin\n"
-"asentamiseen.\n"
-"\n"
-"Valitse \"Lisäasetukset\", jos haluat valita osiot, jotka tarkistetaan "
-"levyllä\n"
-"olevien huonojen kohtien varalta."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Uutta Mandrake Linux -käyttöjärjestelmääsi asennetaan parasta aikaa.\n"
-"Asennettavien pakettien määrästä ja koneesi nopeudesta riippuen\n"
-"vie tämä toiminto muutamasta minuutista useaan tuntiin.\n"
-"\n"
-"Kärsivällisyyttä."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Ennen jatkamista sinun pitäisi lukea huolellisesti lisenssin ehdot. "
-"Lisenssi\n"
-"kattaa koko Mandrake Linux -jakelun, ja jos et hyväksy kaikkia ehtoja,\n"
-"paina \"Kieltäydy\"-painiketta joka keskeyttää asennuksen heti. Jatkaaksesi\n"
-"asennusta paina \"Hyväksy\"-painiketta."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Tässä vaiheessa on aika valita tietokoneellesi sopiva turvataso.Yleisesti\n"
-"mitä avoimempi koneesi on ja mitä enemmän tärkeää tietoa on talletettu\n"
-"koneellesi, sitä korkeampi turvatason pitäisi olla. Huomaa kuitenkin, että\n"
-"korkeampi turvallisuustaso saavutetaan yleensä käytettävyyden\n"
-"kustannuksella. Lue MSEC-kappale \"Reference Manualista\" saadaksesi\n"
-"lisää tietoa turvatasojen merkityksestä.\n"
-"\n"
-"Jos et tiedä mitä valita, käytä oletuksena olevaa vaihtoehtoa."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Tässä vaiheessa sinun pitää valita mille osioille haluat asentaa Mandrake "
-"Linux\n"
-"-käyttöjärjestelmän. Jos osiot on jo määritelty (edellisessä asennuksessa \n"
-"tai jonkin toisen osiointiohjelman toimesta), voit käyttää olemassaolevia "
-"osioita.\n"
-"Muuten kiintolevyosiot täytyy määrittää.\n"
-"\n"
-"\n"
-"Luodaksesi osioita, sinun täytyy ensiksi valita kiintolevy. Voit valita \n"
-"levyn osioitavaksi painamalla \"hda\" ensimmäille IDE-asemalle, \"hdb\"\n"
-"toiselle tai \"sda\" ensimmäiselle SCSI-levylle ja niin edelleen.\n"
-"\n"
-"\n"
-"Osioidaksesi valitun kiintolevyn, voit käyttää seuraavia vaihtoehtoja:\n"
-"\n"
-"\n"
-"   * Tyhjennä kaikki: tämä valinta tuhoaa kaikki osiot valitulla "
-"kiintolevyllä.\n"
-"\n"
-"\n"
-"   * Automaattinen varaus: Tämä valinta luo automaattisesti Ext2- ja "
-"virtuaalimuistiosiot kiintolevysi käyttämättömästä osasta.\n"
-"\n"
-"\n"
-"   * Pelasta osiointitaulu: jos osiointitaulu on vaurioitunut, voit yrittää "
-"toipua vaurioista käyttämällä tätä valintaa.\n"
-"     Muista, että tämä toimenpide voi myös epäonnistua.\n"
-"\n"
-"\n"
-"   * Peruuta: voit käyttää tätä valintaa peruaksesi tehdyt muutokset.\n"
-"\n"
-"\n"
-"   * Palauta: voit käyttää tätä valintaa, jos haluat perua kaikki muutokset "
-"ja palauttaa alkuperäisen osiointitaulun.\n"
-"\n"
-"\n"
-"   * Velho: jos haluat käyttää velhoa kiintolevysi osiointiin, voit käyttä "
-"tätä valintaa. Tämä on \n"
-"     suositeltu valinta, jos sinulla ei ole paljoa kokemusta osioinnista.\n"
-"\n"
-"\n"
-"   * Palauta levykkeeltä: jos olet tallentanut osiointitaulun levykkeelle, "
-"voit palauttaa tallennushetkellä \n"
-"     voimassa olleet asetukset.\n"
-"\n"
-"\n"
-"   * Tallenna levykkeelle: jos haluat tallentaa osiointitaulun levylle "
-"pystyäksesi palauttamaan sen,\n"
-"     voit käyttää tätä valintaa. Suosittelen, että teet tämän ennen kuin "
-"muutat osiointitietoja.\n"
-"\n"
-"\n"
-"   * Valmis: kun olet osioinut kiintolevysi, käytä tätä valintaa "
-"tallentaaksesi muutokset levylle.\n"
-"\n"
-"\n"
-"Kun osio on valittuna voit käyttää:\n"
-"\n"
-"\n"
-"           * Ctrl-c luodaksesi uuden osion (kun tyhjä osio on valittuna)\n"
-"\n"
-"           * Ctrl-d tuhotaksesi osion\n"
-"\n"
-"           * Ctrl-m asettaaksesi osion liitoskohdan tiedostojärjestelmässä\n"
-"\n"
-"\n"
-"Mikäli asennat järjestelmää PPC-koneelta, haluat luoda pienen HFS "
-"'bootstrap'-osion, jonka koko on vähintään \n"
-"1 Mt yaboot-järjestelmänlataajan käyttöön. Jos haluat, voit tehdä "
-"tuostaosiosta myös suuremman, sanotaan 50 Mt, \n"
-"käyttääksesi sitä varaytimen ja ramdisk-imagen tallentamiseksi järjestelmän "
-"latauksen hätätilanteita varten."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Kiintolevyltä on löytynyt useampia kuin yksi Microsoft Windows -osio.\n"
-"Valitse niistä se, jonka kokoa haluat muuttaa pystyäksesi asentamaan\n"
-"Mandrake Linuxn tietokoneeseesi.\n"
-"\n"
-"\n"
-"Tiedoksi: jokaisesta osiosta on listattu seuraavat tiedot: \"Nimi Linuxissa"
-"\", \n"
-"\"Nimi Windowsissa\", \"Kapasiteetti\".\n"
-"\n"
-"\n"
-"\"Nimi Linuxissa\" on koodattu seuraavalla tavalla: \"Kiintolevyn tyyppi"
-"\", \n"
-"\"Kiintolevyn numero\", \"Osion numero\" (esimerkiksi \"hda1\").\n"
-"\n"
-"\n"
-"\"Kiintolevyn tyyppi\" on \"hd\" jos kiintolevysi on IDE-levy ja \"sd\" jos "
-"se on\n"
-"SCSI-levy.\n"
-"\n"
-"\n"
-"\"Kiintolevyn kirjain\" on aina kirjain heti \"hd\":n tai \"sd\":n jälkeen. "
-"IDE-asemilla:\n"
-"\n"
-"   * \"a\" tarkoittaa \"herraksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"b\" tarkoittaa \"orjaksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"c\" tarkoittaa \"herraksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"   * \"d\" tarkoittaa \"orjaksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"\n"
-"SCSI-levyillä \"a\" tarkoittaa \"ensisijainen kiintolevy\", \"b\" "
-"puolestaan\n"
-"\"toissijainen kiintolevy\", jne...\n"
-"\n"
-"\"Nimi Windowsissa\" on kiintolevysi kirjain Windowsin alla ( ensimmäinen "
-"levy\n"
-"tai osio on nimetty \"C:\":ksi)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Kärsivällisyyttä. Tämä toiminto voi kestää useita minuutteja."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Valitse \"Asenna\", jos sinulla ei ole aikaisempaa versiota Mandrake "
-"Linuxsta\n"
-"asennettuna tai haluat käyttää useaa käyttöjärjestelmää.\n"
-"\n"
-"\n"
-"Valitse \"Päivitä\", jos haluat päivittää olemassaolevan version Mandrake "
-"Linuxsta.\n"
-"\n"
-"\n"
-"Riippuen osaamisestasi GNU/Linux-järjestelmissä, voit valita jonkin "
-"seuraavista tasoista Mandrake Linux -käyttöjärjestelmän asentamiseen tai "
-"päivittämiseen:\n"
-"\n"
-"\n"
-"* Suositeltu: jos et ole ikinä asentanut GNU/Linux-käyttöjärjestelmää, "
-"valitse tämä vaihtoehto.\n"
-"  Asennus tulee olemaan helppo ja sinulta tullaan kysymään vain muutama "
-"kysymys.\n"
-"\n"
-"\n"
-"* Mukautettu: jos tunnet GNU/Linuxin tarpeeksi hyvin, voit valita "
-"järjestelmän tyypin käytön mukaan\n"
-"  (työasema, palvelin, kehitys). Sinun tarvitsee vastata useampaan "
-"kysymykseen, kuin \"Suositellussa\" asennuksessa,\n"
-"  joten sinun täytyy tietää miten GNU/Linux toimii, jos haluat valita tämän "
-"asennusluokan.\n"
-"\n"
-"\n"
-"* Asiantuntija: jos tunnet GNU/Linux-järjestelmän hyvin, voit valita tämän "
-"asennusluokan. Kuten\n"
-"  \"Mukautetussa\" asennuksessa, sinun täytyy valita ensisijainen "
-"käyttökohde (työasema,\n"
-"  palvelin, kehitys). Tämä asennusluokka tarjoaa joustavimman asennuksen, "
-"mutta jotkin kysymykset\n"
-"  voivat osoittautua erittäin vaikeiksi niille, jotka eivät tunne GNU/"
-"Linuxia riittävän hyvin.\n"
-"  Älä valitse tätä asennusluokkaa, ellet ole aivan varma, mitä olet "
-"tekemässä."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Tavallisesti DrakX valitsee sinulle oikean näppäimistön (sen mukaan, minkä\n"
-"kielen olet valinnut) ja et edes näe tätä kohtaa. Kuitenkaan sinulla ei "
-"välttämättä\n"
-"ole näppäimistöä, joka vastaa suoraan kieltäsi. Jos olet esimerkiksi "
-"englanninkielinen\n"
-"sveitsiläinen, voit silti haluta sveitsiläisen näppäimistön. Tai jos puhut "
-"Englantia,\n"
-"mutta asut Quebecissä, sinulla voi olla samanlainen tilanne. Molemmissa "
-"tapauksissa\n"
-"sinun pitää palata takaisin kyseiseen asennusvaiheeseen ja valita sopiva "
-"näppäimistö\n"
-"listasta.\n"
-"\n"
-"Paina \"Lisää\"-painiketta saadaksesi täydellisen listan tuetuista "
-"näppäimistöistä. "
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Valitse mieleisesi kieli asennukseen ja järjestelmän käyttöön.\n"
-"\n"
-"Painamalla \"Lisäasetukset\"-painiketta saat mahdollisuuden valita myös\n"
-"muita kieliä asennettavaksi työasemallesi. Muiden kielien valitseminen\n"
-"asentaa kielikohtaiset tiedostot järjestelmän dokumentoinnista ja\n"
-"ohjelmistoista. Esimerkiksi jos sinulla koneessasi Espanjalaisia käyttäjiä,\n"
-"valitse englanti (tai suomi) pääkieleksi ja lisäasetusten puolelta paina\n"
-"harmaata tähteä, joka vastaa Espanjaa.\n"
-"\n"
-"Huomaa, että voit valita useita kieliä. Kun olet valinnut haluamasi "
-"ylimääräiset\n"
-"kielet, paina \"Ok\"-painiketta jatkaaksesi."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX olettaa yleisesti, että sinulla on kaksinäppäiminen hiiri ja kytkee\n"
-"sen kolmannen näppäimen emulaatiolla. DrakX tietää myös\n"
-"automaattisesti, onko se PS/2, sarja- vai USB-hiiri.\n"
-"\n"
-"Jos haluat asettaa eri tyyppisen hiiren, valitse sopiva tyyppi oheisesta\n"
-"listasta.\n"
-"\n"
-"Jos valitset muun kuin oletushiiren, saat eteesi hiiren testiruudun. Käytä\n"
-"hiiren nappeja ja rullaa varmistaaksesi, että asetukset ovat oikeat. Jos\n"
-"hiiri ei toimi kunnolla, paina välilyöntiä tai enteriä peruttaaksesi, minkä\n"
-"jälkeen voit valita uudelleen."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Valitse oikea portti. Esimerkiksi \"COM1\" portti Windowsissa\n"
-"on nimetty \"ttyS0\":ksi GNU/Linuxissa."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) ja grub ovat järjestelmälataajia: ne voivat\n"
-"käynnistää joko GNU/Linuxin tai mikä tahansa tietokoneellasi olevan\n"
-"käyttöjärjestelmän. Tavallisesti kaikki käyttöjärjestelmät tunnistuvat ja\n"
-"asentuvat oikein. Jos edellinen ei kuitenkaan pidä paikkaansa, voit lisätä\n"
-"kyseisen kohdan käsin tässä ruudussa. Ole huolellinen, että tulet\n"
-"valinneeksi oikeat parametrit.\n"
-"\n"
-"Jos et halua kenenkään pääsevän osaan käyttöjärjestelmistä, voit\n"
-"tuhoa kyseiset kohdat. Mutta että siinä tapauksessa tarvitset itse\n"
-"käynnistyslevykettä päästäksesi kyseisiin käyttöjärjestelmiin!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sinun pitää osoittaa paikka, jonne haluat asettaa tarvittavat tiedot\n"
-"GNU/Linuxin käynnistämiseksi.\n"
-"\n"
-"Jos et tiedä tarkalleen mitä olet tekemässä, valitse \"Levyn ensimmäinen\n"
-"sektori (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX hakee koneeseen asennettuja PCI-väyläisiä SCSI-laitteita. \n"
-"Jos SCSI-laite löytyy ja DrakX tietää mitä ajuria käyttää, laite otetaan \n"
-"automaattisesti käyttöön.\n"
-"\n"
-"\n"
-"Jos tietokoneessasi ei ole SCSI-laitetta tai DrakX ei tunnista sinulla \n"
-"olevaa ISA- tai PCI-väyläistä SCSI-laitetta, DrakX kysyy onko koneessasi\n"
-"SCSI-liityntää. Jos ei, voit vallita \"Ei\". Jos valitset \"Kyllä\", tulee \n"
-"näkyviin lista ajureista, josta voit valita sinulla olevan laitteen.\n"
-"\n"
-"\n"
-"Jos sinun täytyy valita ajuri manuaalisesti, DrakX kysyy, haluaisitko "
-"määrittää\n"
-"sille lisäoptioita. Sinun kannattaa antaa DrakX:n tutkia laitteistosi "
-"optioiden\n"
-"löytämiseksi, sillä yleensä kyseinen toiminto toimii hyvin.\n"
-"\n"
-"\n"
-"Jos ei, sinun pitää itse antaa optiot kyseiselle ajurille. Katso lisätietoja "
-"käyttöohjeesta\n"
-"(luku 3, osa \"Collective informations on your hardware\"), jossa on "
-"vinkkejä\n"
-"miten nämä tiedot löytyvät laitteiston ohjekirjoista, "
-"laittteistovalmistajan\n"
-"webbisivuilta (jos sinulla on internetyhteys) tai Microsoft Windowsista "
-"(jos\n"
-"se on asennettu tietokoneeseesi)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Valitse kiintolevy, jonka haluat tyhjentää uudelle Mandrake Linux -osiolle.\n"
-"Ole varovainen, koska kaikki asemalla oleva tieto tuhoutuu eikä ole enää\n"
-"palautettavissa!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Paina \"OK\", jos haluat tuhota kaiken tällä kiintolevyllä olevan tiedon\n"
-"sekä osiot. Ole varovainen, sillä painettuasi \"OK\" et voi enää palauttaa\n"
-"mitään tällä kiintolevyllä olleita tietoja ja osioita, mukaanlukien kaikki\n"
-"Windows-tiedostot.\n"
-"\n"
-"Paina \"Peruuta\" keskeyttääksesi tämän toiminnon ilman että menetät\n"
-"mitään kiintolevyllä ollutta tietoa ja osoita."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Sinun täytyy myös alustaa %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Olet valinnut seuraavat palvelimet: %s\n"
-"\n"
-"\n"
-"Nämä palvelimet otetaan oletuksena käyttöön. Niissä ei ole tunnettuja \n"
-"turvallisuusaukkoja, mutta sellaisia voi löytyä ajan mittaan. Mikäli niin \n"
-"tapahtuu, pitäisi sinun päivittää kyseiset palvelimet niin nopeasti kuin \n"
-"suinkin mahdollista.\n"
-"\n"
-"\n"
-"Haluatko todella asentaa nämä palvelimet?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Aseta tyhjä FAT-alustettu levyke levyasemaan %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Tämä levyke ei ole FAT-alustettu"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Käyttääksesi tätä \"tallennetut paketit\" valintaa, käynnistä asennus "
-"optiolla \"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Virhe lukiessa tiedostoa %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Jokin osa laitteistoasi tarvitsee laitteistovalmistajan ajurit toimiakseen "
-"kunnolla.\n"
-"Voit löytää lisätietoja edellämainituista täältä: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sinulla tulee olla juuriosio.\n"
-"Tätä varten luo osio (tai klikkaa olemassaolevaa).\n"
-"Valitse sitten toiminto ``Liitospaikka'' ja aseta se arvoon `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Sinulla tulee olla heittovaihtotiedosto"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sinulla ei ole heittovaihto-osiota\n"
-"\n"
-"Jatka kuitenkin?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sinulla pitää olla FAT-osio liitettynä hakemistoon /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Käytä tyhjää tilaa"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei tarpeeksi tilaa uusien osioiden luomiseksi"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Käytä olemassa olevia osioita"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ei ole olemassa olevaa osiota käytettäväksi"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Käytä Windows-osiota loopback-tiedostona"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Mille osiolle haluat laittaa Linux4Win:in?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Valitse koot"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Juuriosion koko Mt: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Sivutusosion koko Mt: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Käytä tyhjää tilaa Windows-osiolla"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Minkä osion kokoa haluat muuttaa?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Lasken Windows-tiedostojärjestelmän rajoja"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT-järjestelmän koon muuttaja ei osaa käsitellä osiotasi,\n"
-"saatiin seuraava virhe: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Windows-osiosi on liian pirstoutunut, mene Windowsiin ja aja \"defrag\" ensin"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROITUS!\n"
-"\n"
-"DrakX aikoo nyt muuttaa Windows-osiosi kokoa. Ole varovainen:\n"
-"tämä toimenpide on vaarallinen. Jos et ole vielä tarkistanut \n"
-"Windows-osioitasi, sinun tulisi poistua asennuksesta, ajaa\n"
-"kiintolevyjen tarkistus Windowsissa (sekä mahdollisesti myös\n"
-"eheyttää levyt). Sen jälkeen voit aloittaa asennuksen uudelleen.\n"
-"Samalla suosittelen ottamaan varmuuskopiot tärkeistä tiedoista.Kun olet "
-"varma, paina Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kuinka paljon tilaa haluat säilyttää Windowsilla"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "osio %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-tiedostojärjestelmän koon muuttaminen epäonnistui: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ei ole FAT-osioita, joiden kokoa voisi muuttaa tai käyttää loopback-"
-"tiedostoina (tai osiot ovat täynnä)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Tyhjennä koko levy"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Poista Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Sinulla on enemmän kuin yksi kiintolevy. Mille haluat asentaa Linuxin?"
-
-# mat
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "KAIKKI olemassaolevat osiot ja niissä oleva tieto tuhoutuu asemalta %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Mukautettu levyn osiointi"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Käytä fdiskiä"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Voit nyt osioda kiintolevysi %s\n"
-"Kun olet valmis, älä unohda tallettaa asetuksia komennolla `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Sinulla ei ole tarpeeksi tilaa Windows-osiollasi"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ei ole tarpeeksi tilaa asentamiseen"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX-Osiointivelho löysi seuraavat ratkaisut:"
-
-# mat
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Osiointi epäonnistui: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Käynnistän verkkoa"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ajan alas verkkoa"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tapahtui virhe, sitä ei voida käsitellä kunnolla.\n"
-"Jatka omalla riskilläsi."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Kahdentunut liitospaikka %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Osa tärkeistä paketeista jäi asentamatta loppuun asti.\n"
-"Joko cdrom-asemasi tai levy on viallinen.\n"
-"Tarkista cdrom Linux-koneessa käyttämällä \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-# mat
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Tervetuloa %s:n"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ei levykeasemaa käytettävissä"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Siirryn vaiheeseen `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Järjestelmäsi resurssit ovat lopussa. Voit kohdata ongelmia Mandrake Linuxa "
-"asentaessasi.\n"
-"Jos näin tapahtuu, voit kokeilla tekstipohjaista asennusta. Tehdäksesi niin "
-"paina `F1' kun\n"
-"käynnistät asennusohjelmaa CDROM-asemasta. Tämän jälkeen kirjoita `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Asennusluokka"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Valitse yksi seuraavista asennusluokista:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Valitsemiesi ryhmien kokonaiskoko on suunnilleen %d Mt.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jos haluat asentaa vähemmän kuin tämä koko,\n"
-"valitse prosenttiosuus paketeista jonka haluat asentaa.\n"
-"\n"
-"Pieni prosenttiosuus asentaa vain tärkeimmät paketit,\n"
-"100%% osuus asentaa kaikki paketit."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sinulla on levyllä tilaa vain %d%% paketeista\n"
-".Jos haulat asentaa vähemmän kuin tämän osan,\n"
-"valitse prosenttiosuus paketeista jotka haluat asentaa.\n"
-"Pieni prosentti asentaa vain tärkeimmät paketit, %d%%\n"
-" prosenttiosuus asentaa niin monta pakettia kuin on mahdollista."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Voit valita paketit tarkemmin seuraavassa vaiheessa"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prosenttiosuus asennettavista paketeista"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakettiryhmien valinta"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Yksittäisten pakettien valinta"
-
-# mat
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Koko yhteensä: %d / %d Mt"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Viallinen paketti"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Koko: %d Kt\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tärkeys: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Et voi asentaa tätä pakettia, koska levyllä ei ole tarpeeksi tilaa sen "
-"asentamiseksi"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Seuraavat paketit asennetaan"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Seuraavat paketit poistetaan"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Et voi valita/poistaa tätä pakettia"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Tämä on pakollinen paketti, sitä ei voida poistaa valinnoista"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Et voi poistaa tämän paketin valintaa. Se on jo asennettu"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tämä paketti tulee päivittää\n"
-"Oletko varma että haluat poistaa valinnan?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Et voi poistaa tämän paketin valintaa. Paketti pitää päivittää."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Näytä automaattisesti valitut paketit"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Asenna"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Lataa/Tallenna levykkeelle"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Päivitän pakettien valintaa"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimaalinen asennus"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Valitse asennettavat paketit"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Asennan"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Arvioin aikaa"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Jäljellä "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Valmistelen asennusta"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakettia"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Asennan pakettia %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Hyväksy"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Hylkää"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vaihda CD-levyä!\n"
-"\n"
-"Aseta CD-levy nimeltään \"%s\" CD-asemaan ja paina Ok kun olet valmis.\n"
-"Jos sinulla ei ole levyä, paina Peruuta välttääksesi asennukset tältä "
-"levyltä."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Jatka kuitenkin?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Tapahtu virhe järjestettäessä paketteja:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Tapahtu virhe asennettaessa paketteja:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varoitus\n"
-"\n"
-"Lue huolellisesti alla olevat ehdot. Jos et ole samaa mieltä kaikkien\n"
-"ehtojen kanssa, sinulla ei ole oikeuksia asentaa seuraavaa CD-levyä.\n"
-"Paina 'Kieltäydyn' jos haluat jatkaa asennusta käyttämättä näitä osia.\n"
-"\n"
-"\n"
-"Jotkin seuraavalla CD-levyllä olevat komponentit eivät ole GPL:n tai \n"
-"vastaavanlaisen lisenssin alaisia. Jokaisen tällaisen komponentin ehdot \n"
-"on määritelty erikseen niiden omien lisenssien mukaan. Tutustu näihin \n"
-"lisensseihin huolellisesti ennen kuin käytät tai levität näitä "
-"komponentteja \n"
-"eteenpäin. Tällaiset lisenssit kieltävät tavallisesti siirtämisen, "
-"kopioimisen\n"
-"(lukuunottamatta varmuuskopioita), uudelleenlevityksen, "
-"käänteissuunnittelun \n"
-"binäärikoodin kääntämisen tai muokkaamisen. Jokainen rike sopimusta \n"
-"vastaan päättää oikeutesi kyseiseen lisenssiin. Ellei ole olemassa "
-"erityisiä \n"
-"ehtoja, jotka sallivat ohjelmiston asentamisen useaan koneeseen tai \n"
-"niiden käyttämistä verkon yli, et saa myöskään tehdä niin. Jos et ole \n"
-"varma kaikista ehdoista, ota yhteys suoraan kyseisen komponentin \n"
-"tekijään tai jakelijaan. Yllä mainittujen komponenttien tai niiden \n"
-"dokumentaation saattaminen kolmannen osapuolen käsiin on tavallisesti \n"
-"kieletty.\n"
-"\n"
-"\n"
-"Kaikki oikeudet seuraavan levyn komponentteihin kuuluvat niiden \n"
-"asianomaisille tekijöille ja ne on suojattu yksityisen omaisuuden ja \n"
-"ohjelmiston tekijänoikeuslakien avulla.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tapahtui virhe"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Haluatko todella poistua asennuksesta?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisenssin hyväksyminen"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Näppäimistö"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Valitse näppäimistösi asettelu."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Tässä on koko lista olemassa olevista näppäimistöistä"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Valitse asennuksen luokka?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Asenna/Päivitä"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Onko tämä asennus vai päivitys?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Suositeltu"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Asiantuntija"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Päivitä"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Päivitä vain paketit"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Valitse hiiren tyyppi."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Hiiren portti"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Mihin sarjaporttiin hiiresi on liitetty."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Näppäinemulaatio"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "2. näppäimen emulaatio"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "3. näppäimen emulaatio"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Asetan PCMCIA kortteja...."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Asetan IDE-levyä"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ei vapaita osioita"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Tarkistan osioita löytääkseni liitoskohdat"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Valitse liitospaikat"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Osiotaulua ei voida lukea, siinä on liikaa virheitä :(\n"
-"Asennusta voidaan jatkaa yrittämällä tyhjentää virheelliset osiot\n"
-"(KAIKKI TIETO tuhoutuu!). Toinen vaihtoehto on kieltää DrakX:ää\n"
-"muokkaamasta osiointitaulua. (virhe on: %s)\n"
-"\n"
-"Hyväksytkö kaikkien osioiden menettämisen?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ei pystynyt lukemaan osiotaulua oikein.\n"
-"Jatka omalla vastuullasi!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Ei vapaata tilaa 1 Mt:n käynnistyslohkoa varten! Asennusta jatketaan, mutta "
-"käynnistääksesi järjestelmän, sinun pitää luoda käynnistyslohko-osio "
-"DiskDrakessa."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Päivitykseen tarvittavaa juuriosiota ei löytynyt"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Juuriosio"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Mikä on järjestelmäsi juuriosio (/) ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sinun tulee käynnistää järjestelmä uudelleen jotta muutokset tulevat voimaan"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Valitse alustettavat osiot"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Tarkista vialliset lohkot?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Alustan osioita"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Luon ja alustan tiedostoa %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Heittovaihtotiedosto ei ole riittävän suuri, suurenna sitä"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Etsin saatavilla olevia paketteja"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Etsin päivitettäviä paketteja"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Järjestelmässäsi ei ole riittävästi tilaa asennukseen tai päivitykseen (%d > "
-"%d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Täydellinen (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimi (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Suositeltu (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Lataa tai tallenna pakettien valinta levykkeelle.\n"
-"Muoto on sama kuin auto_install-toiminnon luomilla levykkeillä."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Lataa levykkeeltä"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Ladataan levykkeeltä"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakettien valinta"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Aseta levyke, jossa on pakettien valinta"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Tallenna levykkeelle"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Valittu koko on suurempi kuin olemassa oleva levytila"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Asennuksen tyyppi"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Et ole valinnut yhtäkään pakettiryhmää\n"
-"Valitse haluamasti minimaalinen asennus"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X:llä"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Perusdokumentaation kanssa (suositeltu!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Pienin mahdollinen asennus (erityisesti ei urpmia)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jos sinulla on kaikki CD.levyt allaolevalta listalta, paina OK.\n"
-"Jos sinulla ei ole mitään levyistä, paina Peruuta.\n"
-"Jos jotkut levyistä puuttuvat, poista niiden valinnat, ja paina OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom nimeltään \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Valmistelen asennusta"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Asennan pakettia %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Asennuksen jälkeiset toiminnot"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Aseta käyttämäsi käynnistyslevyke asemaan %s"
-
-# mat
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Aseta moduulien päivityslevyke asemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sinulla on nyt mahdollisuus hakea internetistä ne ohjelmistot, jotka on \n"
-"suunnattu tiedon salakirjoittamiseen.\n"
-"\n"
-"VAROITUS:\n"
-"\n"
-"Näitä ohjelmistoja koskevien eri tasoisten vaatimusten ja eri "
-"lainsäädäntöjen \n"
-"määräysten vuoksi näiden ohjelmistojen asiakkaan ja/tai loppukäyttäjän \n"
-"pitää varmistaa, että hänen maansa lainsäädäntö sallii hänen hakea, "
-"tallentaa \n"
-"ja käyttää näitä ohjelmistoja.\n"
-"\n"
-"Lisäksi asiakkaan ja/tai loppukäyttäjän tulee olla erityisen varmoja siitä, "
-"etteivät \n"
-"he riko maansa lainsäädäntöä vastaan.Mikäli asiakas ja/tai loppukäyttäjä "
-"ei \n"
-"noudata näiden lakien määräyksiä, heille voidaan langettaa vakaviakin \n"
-"rangaistuksia.\n"
-"\n"
-"Missään tilanteissa ei Mandrakesoft tai sen valmistajat ja/tai "
-"jälleenmyyjät \n"
-"ole vastuuvelvollisia erityisiin, epäsuoriin tai satunnaisiin vahinkoihin, "
-"jotka\n"
-"voivat aiheutua (mukaan lukien, mutta ei rajoittuen: tulonmenetykset, \n"
-"yritystoiminnan katkeaminen, kaupallisten tietojen menetys ja muut \n"
-"rahalliset menetykset, sekä mahdolliset vahingonkorvaukset, jotka oikeus \n"
-"päättää langettaa). ohjelmiston käyttämisestä, hallussapidosta, tai "
-"pelkästä \n"
-"internetistä hakemisesta, jossa asiakas ja/tai loppukäyttäjä voi saada \n"
-"haltuunsa nämä ohjelmistot hyväksyttyään tämän sopimuksen.\n"
-"\n"
-"\n"
-"Mihin tahansa tätä sopimusta koskeviin tiedusteluihin, ota yhteys:"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sinulla on nyt mahdollisuus hakea päivitetyt paketit, jotka on julkaistu\n"
-"jakelun ilmestymisen jälkeen.\n"
-"\n"
-"Saat turva- ja ohjelmistokorjaukset, mutta tarvitset toimivan internet-\n"
-"yhteyden jatkaaksesi.\n"
-"\n"
-"Haluatko asentaa päivitykset ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Otan yhteyttä Mandrake Linuxin sivustolle saadakseni listan olemassaolevista "
-"peileistä"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valitse peilijärjestelmä josta paketit haetaan"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Yhdistän peilijärjestelmään hakeakseni uusimman pakettilistan"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Mikä on järjestelmäsi aikavyöhyke?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Laitteistokello asetettu GMT-aikaan"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automaattinen kellon synkronisointi (käyttäen NTP:tä)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ei kirjoitinta"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Onko sinulla muita?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Johtopäätös"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Hiiri"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Aikavyöhyke"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Kirjoitin"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-kortti"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Äänikortti"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kortti"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Paikalliset tiedostot"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ylläpitäjän salasana"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ei salasanaa"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Salasana on liian yksinkertainen (sen tulee olla ainakin %d merkkiä pitkä)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Tunnistustapa"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Tunnistus LDAPilla"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP perus-dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Tunnistus NIS:llä"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-alue"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mukautetulla käynnistyslevykkeellä voit käynnistää järjestelmän ilman\n"
-"tavanomaisen käyttöjärjestelmälataajan apua. Tästä on hyötyä, jos et halua\n"
-"asentaa SILOa järjestelmääsi, toinen käyttöjärjestelmä poistaa SILOn,\n"
-"tai SILO ei toimi laitteistossasi. Mukautettua käynnistyslevykettä voidaan\n"
-"käyttää myös Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
-"järjestelmän virhetilanteista on helpompi toipua.\n"
-"\n"
-"Jos haluat luoda käynnistyslevykkeen järjestelmääsi, aseta levyke\n"
-"ensimmäiseen asemaan ja paina \"Ok\","
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ensimmäinen levyasema"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Toinen levyasema"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ohita"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mukautetulla käynnistyslevykkeellä voit käynnistää järjestelmän ilman\n"
-"tavanomaisen käyttöjärjestelmälataajan apua. Tästä on hyötyä, jos et halua\n"
-"asentaa LILOa (tai grubia) järjestelmääsi, toinen käyttöjärjestelmä poistaa\n"
-"LILOn, tai LILO ei toimi laitteistossasi. Mukautettua käynnistyslevykettä "
-"voidaan\n"
-"käyttää myös Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
-"järjestelmän virhetilanteista on helpompi toipua.\n"
-"Haluatko luoda käynnistyslevykkeen järjestelmääsi?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Levyajuria ei ole saatavilla"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Valitse levyasema jolla luot käynnistyslevykkeen"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Aseta levyke asemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Luon käynnistyslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Valmistelen käyttöjärjestelmän lataajaa"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Sinulla on vanhanaikainen tai tuntematon tietokone,\n"
-"joten yaboot järjestelmänlataaja ei toimi koneessasi.\n"
-"Asennus jatkuu, mutta sinun täytyy käyttää BootX:ää\n"
-"koneesi käynnistämiseen"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Haluatko käyttää aboot:ia?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Virhe asennettaessa aboot:a,\n"
-"yritä pakkoasennusta vaikka se tuhoaa ensimmäisen osion?"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Asennan käyttöjärjestelmän lataajaa"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Järjestelmälataajan asennus epäonnistu. Seuraava virhe tapahtui:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sinun pitää ehkä muuttaa Open Firmware -käynnistyslaitetta\n"
-"aktivoidaksesi järjeslelmälataajan. Jos et näe järjeslelmälataajaa\n"
-"käynistäessäsi konettasi uudelleen, Paina Command-Option-O-F\n"
-"käynnistyksen yhteydessä ja kirjoita:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"sitten kirjoita: shut-down\n"
-"Seuraavalla käynnistyskerralla sinun pitäisi nähdä käynnistyslataajan\n"
-"komentokehoite."
-
-# mat
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Aseta tyhjä levyke levyasemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Valmistelen automaattiasennuslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Joitain vaiheita ei ole saatettu loppuun.\n"
-"\n"
-"Haluatko todella lopettaa?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Onnittelut, asennus on valmis.\n"
-"Poista käynnistettävä media ja paina Enter käynnistääksesi koneen "
-"uudelleen.\n"
-"\n"
-"\n"
-"Löydät tähän Mandrake Linuxin versioon olemassaolevat korjaukset ja\n"
-"korjattujen virheiden listan osoitteesta:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Järjestelmän asettamisesta saat tietoja virallisen Linux Mandraken\n"
-"käyttäjäoppaan jälkiasennuskappaleesta."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Valmistelen automaattista asennuslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automaattinen asennus voi olla täysin automatisoitu,\n"
-"jos niin halutaan. Siinä tapauksessa asennus täyttää\n"
-"koko kiintolevyn! (tarkoitettu toisen koneen asentamiseksi),\n"
-"\n"
-"Ehkä haluat mieluummin toistaa asennuksen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaattinen"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Toista"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Yksittäisten pakettien valinta"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Asennus %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> vaihtaa elementtiä  | <Space> valitsee | <F12> seuraava "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu puuttuu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Valitse tiedosto"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Lisäasetukset"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Perusasetukset"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Odota hetki"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Tietoja"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Laajenna puu"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sulje puu"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Vaihda tasaisen ja ryhmäjärjestyksen välillä"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Huono valinta, yritä uudelleen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Valintasi? (oletus %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Kohdat, jotka sinun pitää täyttää:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Valintasi? (0/1, oletus '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Painike '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Haluatko klikata tätä painiketta? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Valintasi? (oletus '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> On monta asiaa, joista valita (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Valitse ensimmäinen numero 10-välistä, jota haluat muokata,\n"
-"tai paina vain Enter jatkaaksesi.\n"
-"Valintasi? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Huomaa, nimike vaihtui:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Lähetä uudelleen"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tsekki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Saksa"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanja"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Suomi"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ranska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norja"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Puola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Venäjä"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Ruotsi"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK näppäimistö"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US näppäimistö"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albaani"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeenia (vanha)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (kirjoituskone)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneettinen)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaria (foneettinen)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaria (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilia"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Valkovenäjä"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Sveitsi (Saksalainen järjestys)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Sveitsi (Ranskalainen järjestys)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tsekki (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Saksa (ei kuolleita näppäimiä)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Tanska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Norja (Dvorak)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Ruotsi)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eesti"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgia (\"Venäläinen\"-järjestys)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgia (\"Latin\"-järjestys)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Kreikka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Unkari"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatia"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeli (Foneettinen)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islanti"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italia"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japani 106-näppäiminen"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korealainen näppäimistö"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinalainen amerikka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Liettua AZERTY (vanha)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liettua AZERTY (uusi)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Liettua \"numerorivi\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Liettua \"foneettinen\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvia"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonia"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollanti"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Puola (qwerty järjestys)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Puola (qwertz järjestys)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugali"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romania (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romania (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Venäjä (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenia"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakia (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakia (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbia (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai-näppäimistö"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik-näppäimistö"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkki (perinteinen \"F\"-malli)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkki (perinteinen \"Q\"-malli)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US näppäimistö (kansainvälinen)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamilainen \"numerorivi\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavia (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "Hae Windowsin kirjasimet"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Rengasmaisia liitoksia %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Poista loogiset osiot ensin\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA:ta ei tueta enää 2.2-sarjan ytimissä. Käytä 2.4 ydintä."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Hiiri"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Yleinen PS2 rullahiiri"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 näppäin"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Yleinen 2-nappinen hiiri"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Yleinen"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rulla"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "sarja"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Yleinen 3-nappinen hiiri"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sarja, vanha C7 tyyppi)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "väylähiiri"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 näppäintä"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 näppäintä"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ei mikään"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ei hiirtä"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Testaa hiiri"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Aktivoidaksesi hiiren,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "PYÖRITÄ HIIREN RULLAA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Loppu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Seuraava ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Edellinen"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Onko tämä oikein?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ota yhteys internettiin"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Yleisin tapa liittyä asdl-verkkoon on käyttää pppoe:a.\n"
-"Jotkin yhteydet käyttävät pptp:tä, muutamat dhcp:tä.\n"
-"Jos et tiedä, mitä valita, valitse 'käytä pppoe:a'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "käytä dhpc:tä"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "käytä pppoe:a"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "käytä pptp:tä"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Mitä dhcp-asiakasohjelmaa haluat käyttää?\n"
-"Oletus on dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ethernet-verkkokorttia ei löytynyt järjestelmästä.\n"
-"Ei voida asentaa tämän tyyppistä yhteyttä."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Valitse verkkoliittymä"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Valitse mitä verkkokorteista haluat käyttää internetiin liittymiseen"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "verkkokorttia ei löytynyt"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Asetan verkkoa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Syötä koneesi nimi, jos tiedät sen.\n"
-"Jotkin DHCP-palvelimet tarvitsevat koneen nimen toimiakseen.\n"
-"Koneesi nimen pitäisi olla täysin laillinen nimi, kuten\n"
-"\" minunkone.omapaikka.net\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Koneen nimi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Verkkoasetusten velho"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Ulkoinen ISDN-modeemi"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Sisäinen ISDN-kortti"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Minkälainen ISND-yhteytesi on?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Mitä ISDN-asetuksia haluat käyttää?\n"
-"\n"
-"* Vanha asetusjärjestelmä käyttää isdn4net:iä. Se sisältää tehokkaat\n"
-"  työkalut, mutta on vaikea asettaa, eikä se ole standardi.\n"
-"\n"
-"* Uusi asetusjärjestelmä on helpompi ymmärtää, enemmän käytöss',\n"
-"  mutta se sisältää vähemmän työkaluja.\n"
-"\n"
-"Suositus on käyttää uutta ja kevyempää asetusjärjestelmää.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Uusi kokoonpano (isdn-kevyt)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Vanha kokoonpano (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN:n asetus"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Valitse palveluntarjoajasi.\n"
-" Jos se ei ole listassa, valitse `Ei listattu'"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Eurooppalainen protokolla"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Eurooppalainen protokolla (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Muun maailman käyttämä protokolla"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Muun maailman käyttämä protokolla \n"
-" ei D-kanavaa (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Mitä protokollaa haluat käyttää?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Millainen kortti sinulla on?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "En tiedä"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jos sinulla on ISA-kortti, seuraavien arvojen pitäisi olla oikeat.\n"
-"\n"
-"Jos sinulla on PCMIA-kortti sinun täytyy tietää korttisi IRQ ja IO.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Hylkää"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Jatka"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Mikä ISDN-kortti sinulla on?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Olen havainnut ISDN PCI-kortin, mutta en tunnista tyyppiä. Valitseyksi "
-"seuraavassa ruudussa olevista korteista."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI-korttia ei löydetty. Valitse yksi seuraavasta ruudusta."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Valitse sarjaportti, johon modeemisi on kytketty."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Soittoasetukset"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Yhteyden nimi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Puhelinnumero"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Käyttäjä ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-pohjainen"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminaalipohjainen"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Verkkoalueen nimi"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Ensimmäinen nimipalvelin (ei pakollinen)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Toinen nimipalvelin (ei pakollinen)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko katkaista yhteyden tai asettaa sen uudelleen."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Voit asettaa yhteytesi uudelleen."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Olet parasta aikaa yhteydessä internettiin."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko ottaa yhteyden internettiin tai asettaa yhteyden uudelleen."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Et ole juuri nyt yhteydessä internettiin."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Ota yhteys"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Katkaise yhteys"
-
-# Asennuksen sivuvalikko
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Aseta verkkoyhteys"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetyhteyden muodostus ja asetukset"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Asetamme seuraavaksi %s-yhteyden."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Asetamme seuraavaksi %s-yhteyden.\n"
-"\n"
-"\n"
-"Paina Ok jatkaaksesi."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Verkon asetukset"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Koska asennat käyttöjärjestelmää verkon yli, verkkon asetukset ovat jo "
-"tehty.\n"
-"Paina Ok säilyttääksesi nykyiset asetukset tai peruuta asettaaksesi "
-"internet- ja verkkoasetukset uudelleen.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Tervetuloa verkon asettamisvelhoon\n"
-"\n"
-"Seuraavassa vaiheessa määritellään sinun internet- / verkkoasetukset.\n"
-"Jos et halua käyttää automaattista tunnistusta, poista kyseinen valinta.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Valitse uusi asetusprofiili"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Käytä automaattista tunnistusta"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Etsin laitteita...."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Tavallinen modeemiyhteys"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "löydetty portista %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-yhteys"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "löydetty %s:sta"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL-yhteys"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "löydetty seuraavasta liitännästä: %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kaapeliyhteys"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kaapeliyhteys havaittu"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Lähiverkko"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "seuraavat ethernet-verkkokortit löydetty"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Valitse yhteys, jonka haluat asettaa"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Olet asettanut useita eri tapoja ottaa yhteys internetiin.\n"
-"Valitse se, jota haluat käyttää.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetyhteys"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Haluatko ottaa yhteyden koneen käynnistyksen yhteydessä?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Verkon asetukset"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Verkko pitää käynnistää uudelleen"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ongelma käynnistettäessä verkkoa uudelleen: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Onnittelut, verkko- ja internetyhteyksien asetus valmis.\n"
-"\n"
-"Asetukset tulevat käyttöön myös itse järjestelmässä.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Kun tämä on tehty, suosittelemme käynnistämään X-ympäristön\n"
-"uudelleen välttääksesi järjestelmän nimen vaihdoksesta tulevat ongelmat."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Ongelmia asettamisen aikana.\n"
-"Testaa yhteytesi net_monitor- tai mcc-työkalulla. Jos yhteytesi ei toimi, "
-"voit käynnistää asetustyökalun uudelleen"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VAROITUS: Tämä laite on aikaisemmin määritelty internetyhteyden ottoon.\n"
-"Hyväksy, jos haluat pitää laitteen asetukset sellaisina, kun ne olivat.\n"
-"Alla olevien kohtien muokkaaminen korvaa voimassa olevat asetukset."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Anna koneen IP-asetukset. Kukin kohta tulee syöttää IP-osoitteena,\n"
-"pisteillä eroteltuna nelinumeroisena lukuna (esim. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Asetan verkkolaitetta %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (ajuri %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-osoite"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Verkkopeite"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automaattinen IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-osoitteen tullee olla muotoa 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Syötä koneesi nimi.\n"
-"Koneesi nimen pitäisi olla täydellinen, kuten ``minunkone.yritys.fi''.\n"
-"Voit antaa myös yhdyskäytävän IP-osoitteen jos sinulla on sellainen."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Nimipalvelin"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Yhdyskäytävä (esim. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Yhdyskäytävän laite"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxyjen asettaminen"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-välityspalvelin:"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-välityspalvelin:"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Selvitä verkkokortti-id (hyödyllistä sylimikroille)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Välityspalvelimen tulee olla muotoa http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Välityspalvelimen tulee olla muotoa ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internetin asetukset"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Haluatko kokeilla internetyhteyttä nyt?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testaan yhteyttäsi..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Järjestelmä on nyt internetissä."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Turvallisuussyistä yhteys suljetaan nyt."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Järjestelmä ei näytä olevan internetissä.\n"
-"Yritä muuttaa internet-asetuksia."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Yhteyden asetus"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Valitse alla olevista kohdista"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kortin IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kortin muisti (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kortin IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kortin IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kortin IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Henkilökohtainen puhelinnumerosi"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Palveluntarjoajan nimi (esim: tarjoaja.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Palveluntarjoajan puhelinnumero"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Yhteydentarjoajan dns 1 (vapaaehtoinen)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Yhteydentarjoajan dns 2 (vapaaehtoinen)"
-
-# Asennuksen sivuvalikko
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Valitse maasi"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Soittotila"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Yhteyden nopeus"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Yhteyden aikaraja (sekunneissa)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Käyttäjätunnus (käyttäjän nimi)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Salasana"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "liittäminen epäonnistui: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Laajennettua osiotyyppiä ei ole tuettu tässä ympäristössä"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Sinulla on reikä osiotaulussasi eikä sitä voida käyttää.\n"
-"Ainoa ratkaisu on siirtää primääriosioita siten että reikä on ennen "
-"laajennettuja osioita"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Palautus tiedostosta %s epäonnistui: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Huono varmuuskopiotiedosto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Jotakin kamalaa on tapahtunut kiintolevyllesi.\n"
-"Tiedon oikeellisuuden tarkistus epäonnistui.\n"
-"Kaikki asemalle kirjoitettu tieto muuttuu tunnistamattomaksi"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "pakollinen"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tärkeä"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "erittäin hyvä"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "hyvä"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ehkä"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Paikallinen tulostin"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Ulkoinen tulostin"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Tulostin ulkoisella CUPS-palvelimella"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Tulostin ulkoisella lpd-palvelimella"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Verkkotulostin (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tulostin SMB/Windows 95/98/NT -palvelimella"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Tulostin NetWare-palvelimella"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Syötä tulostinlaitteen osoite (URI)"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Putkita työ käskylle"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Tuntematon malli"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Paikalliset tulostimet"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Ulkoiset tulostimet"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " rinnakkaisliitännässä \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB tulostin \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", monikäyttölaite rinnakkaisportissa \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", monikäyttölaite USB:ssa"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", monitoimilaite HP JetDirectissä"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", monitoimilaite"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", tulostetaan: %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "LPD-palvelimella \"%s\", tulostin \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP -verkkopäätteellä \"%s\", portissa %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "Windows-palvelimella \"%s\", jako \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "Novell-palvelimella \"%s\", tulostin \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", käyttäen komentoa %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raakatulostin (ei ajuria)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s:ssa)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(tällä koneella)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-palvelimella \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Oletus)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Valitse tulostinyhteys"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Miten tulostin on liitetty?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Tulostimia, jotka ovat ulkoisella CUPS-palvelimella, ei tarvitse asettaa\n"
-"tässä; nämä tulostimet tunnistetaan automaattisesti."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Asetustyökalut"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"CUPS-etäpalvelimilla sinun ei tarvitse asettaa tulostinta tässä; CUPS-"
-"palvelimet kertovat niillä olevat tulostimet itse koneellesi. Kaikki tällä "
-"hetkellä tunnetut tulostimet on listattu \"Oletustulostin\" -kentässä. "
-"Valitse sieltä koneesi oletustulostin ja paina \"Toteuta/Lue uudelleen "
-"tulostimet\" -painiketta. Klikkaamalla samaa painiketta voit myös virkistää "
-"listan (CUPS-tulostimet ilmestyvät 30 sekunnin sisällä). Kun CUPS-"
-"pelvelimesi on eri aliverkossa, sinun pitää antaa CUPS-palvelimesi IP-osoite "
-"ja mahdollisesti myös portin numero saadaksesi tiedot palvelimelta. Muussa "
-"tapauksessa jätä kentät tyhjiksi."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-osoitteen tullee olla muotoa 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Portin numeron pitäisi olla kokonaisluku!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-palvelimen IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Portti"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CUPSin automaattinen asettaminen"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Etsin laitteita ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Kokeile portteja"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Lisää uusi tulostin"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Paikallinen tulostin"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Etsi tulostimet"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Tulostimien automaattinen löytäminen"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Tee automaattinen tunnistus"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Aseta tulostin manuaalisesti"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Löydetty %s:sta"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Tulostin rinnakkaisportissa \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-tulostin \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Sinun täytyy syöttää laitteen tai tiedoston nimi!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Paikallisia tulostimia ei löytynyt!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Seuraava tulostin löydettiin, jos se ei ole se, jonka haluat asettaa, syötä "
-"laite- tai tiedostonimi syöteriville"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Tässä on lista löydetyistä tulostimista. Valitse se tulostin, jonka haluat "
-"asettaa tai syötä laite- tai tiedostonimi syöteriville"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Valitse portti, johon tulostimesi on kytketty tai syötä laitteen tai "
-"tiedoston nimi syöteriville"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Valitse portti, johon tulostimesi on kytketty."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Rinnakkaisportit: /dev/lp0, /dev/lp1, ..., vastaavat LPT1:, LPT2:, ..., 1. "
-"USB-tulostin: /dev/usb/lp0, 2. USB-tulostin: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Sinun täytyy valita tai syöttää tulostinlaite!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuaalinen asettaminen"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Asennetaan HPOJ-pakettia..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Tarkistetaan laite ja asetetaan HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Asennetaan SANE-paketteja..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skannataan HP-monikäyttölaitteella"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Asetetaan tulostusportti CUPSin saataville..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Luetaan tulostintietokantaa ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Ulkoisen lpd-palvelimen tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Jotta voisit käyttää ulkoista lpd-tulostinta, sinun pitäisi syöttää "
-"tulostuspalvelimen verkkonimi sekä tulostimen nimi kyseisellä palvelimella."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Palvelimen verkkonimi"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ulkoisen tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Palvelimen verkkonimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ulkoisen tulostimen nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) -tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB-palvelimen tulostimelle tulostaaksesi sinun pitäisi syöttää SMB-koneen "
-"nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja mahdollisesti "
-"tulostuspalvelimen IP-osoite, tulostimen jakonimi sekä soveltuva "
-"käyttäjätunnus, salasana ja työryhmä-tieto."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-palvelimen nimi"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-palvelimen IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Jakonimi"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Työryhmä"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Joko palvelimen nimi tai IP-numero on annettava!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba-jaon nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare-palvelimen tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare-palvelimen tulostimelle tulostaaksesi sinun pitäisi syöttää NetWare-"
-"palvelinkoneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja "
-"mahdollisesti tulostusjonon nimi sille tulostimelle, jota haluat käyttää, "
-"sekä soveltuva käyttäjätunnus ja salasana."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Tulostuspalvelin"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Tulostusjonon nimi"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-palvelimen nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-jonon nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket -tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Tulostaaksesi TCP- tai socket-tulostimella, sinun täytyy antaa tulostimen "
-"verkkonimi ja mahdollisesti portin numero. HP JetDirect-palvelimissa "
-"porttinumero on useimmiten 9100, muissa palvelimissa portti voi vaihdella. "
-"Tarkista portti laitteistosi ohjekirjasta."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Tulostinlaitteen verkkonimi"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Tulostinlaitteen verkkonimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Tulostinlaitteen osoite (URI)"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Sinun pitää syöttää laillinen URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Kuvaus"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Paikka"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Valmistellaan tulostintietokantaa ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Ulkoisen tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Onko tämä oikein?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Valitse käyttäjät yksitellen"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Tulostimen mallin valinta"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Mikä tulostinmalli sinulla on?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinterin asettaminen"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjetin asettaminen"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valitsimen %s pitää olla kokonaisluku!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valitsimen %s pitää olla luku!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valitsin %s on arvoalueensa ulkopuolella!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Haluatko asettaa tämän tulostimen (\"%s\")\n"
-"oletustulostimeksi?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testisivut"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Ei testisivuja"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Tulosta"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardi testisivu"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Vaihtoehtoinen testisivu (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Vaihtoehtoinen testisivu (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Valokuvatestisivu"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Älä tulosta testisivua"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tulostan testisivu(j)a..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testisivu(t) on lähetetty tulostimelle.\n"
-"Voi kestää hetken ennen kuin tulostus alkaa.\n"
-"Tulostuksen tila:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testisivu(t) on lähetetty tulostimelle.\n"
-"Voi kestää hetken ennen kuin tulostus alkaa.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Toimiko tulostus kunnolla?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Raakatulostin"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Saadaksesi selville nykyisen tulostimen parametrit lue joko alla oleva lista "
-"tai klikkaa \"Tulostuksen valintalista\"-painiketta.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Tässä on lista nykyisen tulostinen käytössä olevista tulostusvalinnoista:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentoriviltä (pääteikkunasta) käytä komentoa \"%s "
-"<tiedosto>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Saadaksesi listan nykyisen tulostimen parametreistä klikkaa \"Tulostuksen "
-"valintalista\"-painiketta."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentoriviltä (pääteikkunasta) käytä komentoa \"%s "
-"<tiedosto>\". tai \"%s <tiedosto>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Sulje"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tulostetaan/skannataan laitteella \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tulostus käynnissä tulostimella \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Tulostusparametrien lista"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Luetaan tulostimen tietoja ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Siirrä tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ja LPRng eivät tue IPP-tulostimia.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Älä siirrä tulostimia"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Siirrä"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Tulostimen nimi saa sisältää vain kirjaimia, numeroita ja alaviivan"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tulostin \"%s\" on jo olemassa,\n"
-"haluatko todellakin tuhota olemassa olevat asetukset?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Uuden tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Siirrän %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Päivitetään tulostintietoja ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Ulkoisen tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Luon verkkoyhteyttä ..."
-
-# Asennuksen sivuvalikko
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Aseta verkkoyhteys nyt"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Verkkotoimintoja ei ole asetettu"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Jatka asettamatta verkkoyhteyttä"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Käynnistän tulostusjärjestelmää uudelleen ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "korkea"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidi"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Asennan tulostusjärjestelmän turvatasolla %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Käynnistää tulostusjärjestelmän käynnistyksen aikana"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Tarkistan asennetut ohjelmistot..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Poistetaan LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Poistetaan LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Valitse tulostusjono"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Mitä tulostusjärjestelmää (jonoa) haluat käyttää?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Asetetaan tulostinta \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Asennan Foomaticin ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Valmistellaan PrinterDrakea ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Asetetaan tulostinta \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Haluatko asettaa tulostuksen?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Tulostusjärjestelmä: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Päivitä tulostinlistaa (näytä kaikki saatavilla olevat CUPS-etätulostimet)"
-
-# Asennuksen sivuvalikko
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Aseta tulostusjärjestelmä"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Perustila"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Haluatko asettaa toisen tulostimen?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Muokkaa tulostimen asetuksia"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tulostin %s\n"
-"Mitä haluat muokata tästä tulostimesta?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Tee se!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tulostusyhteyden tyyppi"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Tulostimen nimi, kuvaus, paikka"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Tulostimen valmistaja, malli, ajuri"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Tulostimen valmistaja, malli"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Aseta tämä tulostin oletukseksi"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tulosta testisivut"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Tiedä kuinka käyttää tätä tulostinta"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Poista tulostin"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Poistetaan vanha tulostin \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Oletustulostin"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tulostin \"%s\" on asetettu oletustulostimeksi."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Haluatko todella poistaa tulostimen \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Poistetaan tulostin \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-asetukset"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Tervetuloa proxyn asettamisohjelmaan.\n"
-"\n"
-"Täältä voit asettaa http- ja ftp-proxysi sisäänkirjautumisen ja\n"
-"salasanojen kanssa tai ilman niitä\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Täytä http-proxyn tiedot\n"
-"Jätä kohta tyhjäksi, jos et haluat http-proxyä"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "portti"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Web-osoitteen tulee alkaa etuliitteellä 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Porttiosan pitäisi olla numeerinen"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Täytä ftp-proxyn tiedot\n"
-"Jätä kohta tyhjäksi, jos et haluat ftp-proxyä"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Web-osoitteen tulee alkaa etuliitteellä 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Syötä proxyn käyttäjätunnus ja salasana, jos sellaiset on.\n"
-"Jätä kohdat tyhjiksi, jos et halua käyttää tunnus/salasana-yhdistelmää"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "käyttäjätunnus"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "salasana"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "salasana uudelleen"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Salasanat poikkeavat toisistaan. Kokeile uudelleen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "En voi lisätä osiota _alustetulle_ RAID:lle md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "En voi kirjoittaa tiedostoa %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid epäonnistui"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid epäonnistui (ehkä raid-työkalut puuttuvat?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei riittävästi osioita RAID tasolle %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Käynnistä ALSA (Advanced Linux Sound Architecture) äänijärjestelmä"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron on jaksottainen komentojen ajastaja."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd:ta käytetään valvomaan paristojen tilaa ja raportoimaan siitä syslogin\n"
-"kautta. apmd:tä voidaan myös käyttää sulkemaan kone patterien ollessa tyhjiä."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ajaa komentoja määrätyillä ajanhetkillä, jotka on määritelty at-komennolla.\n"
-"Ajaa myös eräajoja, kun järjestelmän kuormitus on riittävän matala."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIX:n perusohjelma joka ajaa määriteltyjä ohjelmia määrätyillä\n"
-"ajanhetkillä. vixie cron lisää monia omianisuuksia verrattuna normaaliin\n"
-"UNIX:n cron ohjelmaan, kuten paremman turvallisuuden ja laajemmat asetukset."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM lisää hiirituen tekstipohjaisiin Linux-sovelluksiin kuten Midnight\n"
-"Commander. GPM mahdollistaa myös leikkaa/liimaa toiminnot hiirellä,\n"
-"ja sisältää tuen valikoille konsolissa."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake etsii uutta laitteistoa ja mahdollisesti konfiguroi\n"
-"uuden/muuttuneen laitteiston."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache on WWW-palvelin. Palvelinta käytetään jakamaan HTML-\n"
-"tiedostoja ja ajamaan CGI-ohjelmia."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet pääpalvelin (yleensä inetd) käynnistää useita eri\n"
-"internet palveluita tarpeen mukaan. Palvelin käynnistää useita\n"
-"palveluita, kuten telnet, ftp, rsh ja rlogin. inetd:n poistaminen\n"
-"poistaa myös nämä palvelut käytöstä."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Käynnistä pakettifiltteri Linux 2.2-sarjalle, jos haluat\n"
-"pystyttää palomuurin suojaamaan konettasi verkkohyökkäyksiltä."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Paketti lataa valitun näppäinkartan /etc/sysconfig/keyboard\n"
-"tiedoston asetusten mukaisesti.  Asetukset voidaan valita kbdconfig "
-"työkalulla.\n"
-"Tämä tulisi ottaa käyttöön lähes kaikissa järjestelmissä."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automaattinen ytimen otsikkotiedoston korjaus /boot-hakemistossa "
-"tiedostolle\n"
-"/usr/include/linux/{autoconf,versio}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automaattinen uuden laitteiston havaitseminen ja asettaminen "
-"käynnistettäessä."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf järjestää joskus aikaa erilaisten tehtävien hoitamiseen\n"
-"käynnistyksen aikana pitääkseen yllä järjestelmän asetuksia."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd on tulostuspalvelin, jonka lpr ohjelma vaatii toimiakseen.\n"
-"lpd on palvelin joka jakaa tulostustöitä kirjoittimille."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, jonka avulla voidaan rakentaa suuritehoinen\n"
-"korkean käytettävyyden palvelin."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) on nimipalvelin (DNS) jota käytetään muunnettaessa koneiden "
-"verkkonimiä IP-osoitteiksi."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Liittää ja irroittaa NFS (Network File System), SMB (Lan\n"
-"Manager/Windows) ja NCP (NetWare) liitospaikat."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivoi/Poistaa kaikki verkkoliittymät jotka on asetettu\n"
-"käynnistyksessä."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. Tämä palvelu mahdollistaa NFS-palvelimen\n"
-"käynnistyksen, jakoa ohjataan tiedostosta /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. Tämä palvelu mahdollistaa NSF-tiedostolukot."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Asettaa käynnistyksessä numlock-näppäinlukitsimen päälle\n"
-"sekä konsolille että XFree:lle."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Tuki OKI 4w -yhteensopiville Windows-tulostimille."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMIA tukea käytetään yleensä kannettavissa ethernet- ja modeemi-\n"
-"korttien tukemiseen. Palvelu ei käynnisty ellei sitä ole asetettu, joten\n"
-"sen voi asentaa myös koneisiin jotka eivät sitä tarvitse."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper hallitsee RPC-yhteyksiä, joita käyttävät esimerkiksi\n"
-"NFS ja NIS-protokollat. portmap-palvelin on oltava käynnissä\n"
-"järjestelmissä jotka haluavat tarjota näitä protokollia."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix on sähköpostin siirtoagentti, eli ohjelma joka välittää postia "
-"koneelta toiselle."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Tallentaa ja palauttaa järjestelmän satunnaislukualtaan, tämä parantaa\n"
-"satunnaislukujen laatua."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Määrää raakalaitteet blokkilaitteiksi (kuten kiintolevyn\n"
-"osiot) tietyn tyyppisten sovellusten (esim. Oracle) käyttöön"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed-palvelin mahdollistaa automaattiset IP-reititystaulun päivitykset\n"
-"RIP-protokollalla. Vaikka RIP-protokolla on paljon käytetty pienissä "
-"verkoissa,\n"
-"monimutkaisemmat verkot vaativat parempia reititysprotokollia."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstart-protokolla mahdollistaa verkkokäyttäjille\n"
-"eri koneiden tilatietojen haun."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers-protokolla verkon käyttäjille mahdollisuuden tunnistaa, ketkä\n"
-"ovat sisällä eri koneissa."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho-protokollalla etäkäyttäjät voivat listata kaikki koneella\n"
-"olevat käyttäjät (vastaa fingeriä)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Käynnistä äänijärjestelmä tietokoneessasi"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog on tapa jolla monet palvelimet kirjottavat viestinsä talteen\n"
-"useisiin lokitiedostoihin.  On järkevää käyttää syslog-ohjelmaa."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Lataa usb-laitteiden ajurit."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Käynnistää X-kirjasinpalvelimen (pakollinen, jos haluat ajaa XFree:tä)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valitse mitkä palvelut käynnistetään automaattisesti"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Tulostus"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Tiedostojen jako"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Järjestelmä"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Etähallinta"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Tietokantapalvelin"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Palvelut: %d activoitu %d:stä rekisteröidystä"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Palvelut"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "käynnissä"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "pysähtynyt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Palvelut ja demonit"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ei lisätietoja\n"
-"tälle palvelulle."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Käynnistyksen yhteydessä"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Käynnistä"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Sammuta"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Liity vapaan ohjelmiston maailmaan"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet ja viestintä"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Grafiikka"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Kehitysympäristö"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandraken hallintapaneeli"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Käyttöliittymät"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Palvelinohjelmisto"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Pelit"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Asennan paketteja..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Osiotaulua ei voida lukea, siinä on liikaa virheitä :(\n"
-"Taulu yritetään korjata nollaamalla se"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Virhe!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Tarvittavaa esitystiedostoa `%s' ei löytynyt."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Asenna asennusohjelma automaattisesti"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automaattisten vaiheiden asetus"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Välitse jokaiselle vaiheelle toistetaanko asennus samalla tapaa kuin nyt vai "
-"onko kyseinen vaihe manuaalinen"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Tervetuloa.\n"
-"\n"
-"Automaattisen asennuksen parametrit löytyvät vasemmalla olevista lohkoista"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Onnittelut!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Levykkeen luominen onnistui.\n"
-"Voit nyt toistaa asennuksesi."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automaattinen asennus"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Lisää alkio"
-
-# mat
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Poista viimeinen alkio"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup-raportti \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemonin raportti\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup-raportin yksityiskohdat\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "kokonaisedistyminen"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Varmuuskopioi järjestelmätiedostot..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Kiintolevyn varmuuskopiotiedostot..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Varmuuskopioi käyttäjätiedostot..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Kiintolevyn varmuuskopion edistyminen..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Varmuuskopioi muut tiedostot..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"tiedostolistan lähetti FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP-yhteysongelma: varmuuskopion lähettäminen FTPn kautta epäonnistui.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Virhe lähetettäessä sähköpostia. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Tiedostojen valinta"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Valitse tiedostot tai hakemistot ja klikkaa 'Lisää'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Valitse kaikki asetukset, jotka tarvitset.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Naillä asetuksilla voit varmuuskopioida ja palauttaa kaikki tiedostot /etc-"
-"hakemistosta.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Varmuuskopioi systeemitiedostot ( /etc-hakemisto )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Käytä kasvavaa varmuuskopiointia (älä korvaa vanhoja varmuuskopioita)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Älä sisällytä kriittisiä tiedostoja (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Tällä valitsimella voit palauttaa minkä tahansa version\n"
-"/etc-hakemistostasi."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Valitse kaikki ne käyttäjät, jotka haluat sisällyttää varmuuskopioosi."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Älä sisällytä selaimen välimuistia"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Käytä kasvavia varmuuskopitoita  (älä korvaa vanhoja varmuuskopioita)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Poista valitut"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Käyttäjät"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Käytä FTP-yhteyttä varmuuskopiointiin"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Syötä verkkoaseman nimi tai IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Syötä hakemisto, johon tämän\n"
-"koneen varmuuskopio laitetaan."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Syötä käyttäjätunnuksesi"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Syötä salasanasi"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Muista tämä salasana"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP-yhteys"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Salattu yhteys"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Käytä CD/DVD-ROM -levyä varmuuskopioille"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Valitse käytettävä CD:n koko"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Valitse, jos käytät CD-RW-mediaa"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Valitse, jos haluat tyhjentää CD-RW:n ennen kopiointia"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Valitse, jos haluat tehdä CD-levystäsi\n"
-"käynnistettävän."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Syötä kirjoittavan CD-asemasi laitenimi\n"
-"esim: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Käytä nauhaa varmuuskopioinnissa"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Syötä varmuuskopioinnissa käytettävän laitteen nimi"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Syötä suurin sallittu koko\n"
-"Drakbackup-varmuuskopiolle"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Syötä hakemisto, johon tallennetaan:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Käytä quotaa varmuuskopiotiedostoille."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Verkko"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CD-ROM / DVD-ROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Kiintolevy / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "tunneittain"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "päivittäin"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "viikoittain"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "kuukausittain"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Käytä daemonia"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Valitse peräkkäisten\n"
-"varmuuskopioiden aikaväli"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Valitse varmuuskopiointiin\n"
-"käytettävä media."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Käytä kiintolevyä daemonilla"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Käytä FTPtä daemonilla"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Varmista että cron-daemon on mukana käytössä olevissa palveluissa."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Lähetä raportti jokaisesta varmuuskopiosta sähköpostitse :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Mitä"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Missä"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Koska"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Lisävalinnat"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup-asetukset"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Valitse, mihin haluat tehdä varmuuskopiot"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "kiintolevylle"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "verkon yli"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Valitse mitä haluat varmuuskopioida"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Varmuuskopioi järjestelmä"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Varmuuskopioi käyttäjät"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Valitse käyttäjät yksitellen"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Varmuuskopion lähteet: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Järjestelmätiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Käyttäjätiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Muut tiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Tallenna kiintolevylle polulle : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Tallenna FTP:llä verkkoasemalle : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t käyttäjätunnus: %s\n"
-"\t\t polulla: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Valitsimet:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tÄlä sisällytä järjestelmätiedostoja\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tVarmuuskopiot käyttävät: tar ja bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tVarmuuskopiot käyttävät: tar ja gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) sisältää :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Kiintolevy.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CD-ROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Verkkoon käyttäen FTP:tä.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Verkkoon käyttäen SSH:ta.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ei asetettu, valitse Velho tai Edistynyt.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista palautettavista tiedoista:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista vahingoittuneista tiedoista:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Poista valinta tai poista se seuraavalla kerralla."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Varmuuskopiot ovat vahingoittuneet"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Kaikki valitsemasi tieto on          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          onnistuneesti palautettu paikkaan %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Palauta asetukset       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Ok palauttaakseen muut tiedostot."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Palautettava käyttäjälista (vain uusin päivä kutakin käyttäjää kohti on "
-"tärkeä)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Tee järjestelmätiedostoista varmuuskopio ennen:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Valitse päivämäärä, johon tiedon palauttaminen tehdään"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Käytä kiintolevyä varmuuskopiointiin"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Palauta kiintolevyltä."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Anna hakemisto, johon varmuuskopiot on tallennettu"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Valitse toinen media, josta palauttaa"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Muu media"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Palauta järjestelmä"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Palauta käyttäjät"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Palauta muut"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "valitse polku, josta palautat (juurihakemiston sijaan)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Tee uusi varmuuskopio ennen palauttamista (vain kasvavilla varmuuskopioilla)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Poista käyttäjien hakemistot ennen palauttamista."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Palauta kaikki varmuuskopiot"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Mukautettu palautus"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Apua"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Edellinen"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Tallenna"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Tee varmuuskopio"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Palauta"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Seuraava"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Tee varmuuskopio ennen kuin yrität palauttaa sen...\n"
-"tai tarkista että tallennuspolku on oikea."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Virhe sendmailin aikana\n"
-"  raporttipostiasi ei lähetetty\n"
-"  Konfiguroi sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista asennettavista paketeista"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Virhe FTP-siirron aikana.\n"
-" Korjaa FTP-asetuksesi."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Valitse palautettava tieto..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Valitse varmuuskopioinnissa käytettävä media..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Valitse varmuuskopioitava tieto..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Asetustiedostoa ei löytynyt\n"
-"valitse joko Velho tai Kehittynyt."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Kehityksen alla ... odota."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Varmuuskopioi järjestelmätiedostot"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Varmuuskopioi käyttäjätiedostot"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Varmuuskopioi muut tiedostot"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Kokonaisedistyminen"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "tiedostoja lähetetään FTP:n yli"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Lähetän tiedostoja..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Tietolista sisällytettäväksi CD-ROMiin"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Valitse kirjoittavan CD-aseman nopeus"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Valitse kirjoittavan CD-aseman laitenimi (esim. 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Valitse, jos haluat tehdä käynnistettävän CD:n."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Tee heti asetustiedoston varmuuskopio"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Näytä varmuuskopioinnin asetukset."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr ""
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Varmuuskopioi heti"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft. Tekijä: DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s:n asennus epäonnistu. Seuraava virhe tapahtui:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Etsi asennetut kirjasimet"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Poista asetettujen kirjasimien valinta"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "jäsennä kaikki kirjasimet"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "kirjasimia ei löytynyt"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "valmis"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "liitetyiltä osioilta ei löytynyt ainoatakaan kirjasinta"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Valitse uudelleen oikeat kirjasimet"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "kirjasimia ei löytynyt.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Etsi kirjasimia asennettujen listalta"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kirjasimet kopioi"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type kirjasimien asennus"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "odota kunnes ttmkfdir on valmis..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type -asennus valmis"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Kirjasinten muuntaminen"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "rakennetaan: type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf kirjasinten muunnos"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm kirjasinten muunnos"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Poista väliaikaistiedostot"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Käynnistä XFS uudelleen"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Poista kirjasintiedostot"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs:n uudelleenkäynnistys"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Ennen kuin asennat uusia kirjasimia, varmista että sinulla on oikeudet "
-"käyttää ja asentaa ne järjestelmääsi.\n"
-"\n"
-"- Voit asentaa kirjasimet perinteisellä tavalla. Harvoissa tapauksissa bogus-"
-"kirjasimet voivat lukitä X-palvelimen."
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Kirjasinten tuonti"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hae Windowsin kirjasimet"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Poista kirjasimet levyltä"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Lisävalinnat"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Kirjasinlista"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Valitse sovellukset, jotka tukevat kirjasimia :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Yleiset tulostimet"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Valitse kirjasintiedosto tai hakemisto ja klikkaa 'Lisää'"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Asenna lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "paina tähän, kun olet varma."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "tähän jos et ole."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Poista valinta kaikista"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Valitse kaikki"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Poista lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Alkutestit"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopioi kirjasimet järjestelmääsi"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Asenna & muunna kirjasimia"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Asennuksen jälkeiset toiminnot"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Poista järjestelmässäsi olevia kirjasimia"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Poistamisen jälkeiset toiminnot"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetyhteyden jakaminen"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetyhteyden jakaminen on käytössä"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on: käytössä.\n"
-"\n"
-"Mitä haluat tehdä?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "poista käytöstä"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "lopeta"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "aseta uudelleen"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Poistan palvelut käytöstä..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetyhteyden jakaminen ei ole enää käytössä."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetyhteyden jakaminen ei ole käytössä"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on .ei käytössä\n"
-"\n"
-"Mitä haluat tehdä?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ota käyttöön"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Otan palvelut käyttöön.."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetyhteyden jakaminen on nyt käytössä."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Olet aikeissa asettaa tietokoneesi jakamaan internetyhteyden muiden koneiden "
-"kanssa.\n"
-"Tällä ominaisuudella muut paikallisverkossa olevat tietokoneet voivat "
-"käyttää tämän tietokoneen internetyhteyttä.\n"
-"\n"
-"Huomaa: tarvitset erityisen verkkokortin pystyttääksesi oman paikallisverkon."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liittymä %s (käyttäen moduulia %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Liittymä %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Koneessasi ei ole verkkokorttia!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Koneestasi ei löytynyt yhtään verkkokorttia. Aja laitteistonhakutyökalu."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Verkkoliittymä"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Tietokoneessasi on vain yksi verkkokortti:\n"
-"\n"
-"%s\n"
-"\n"
-"Valmistaudun asettamaan lähiverkkosi asetukset kyseiselle laitteelle."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Valitse verkkokortti, joka on kytketty paikallisverkkoon."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Verkkoliitäntä on jo asetettu"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varoitus, verkkokortti (%s) on jo asetettu.\n"
-"\n"
-"Haluatko automaattisen uudelleenasetuksen?\n"
-"\n"
-"Voit asettaa sen myös manuaalisesti, mutta silloin sinun pitää tietää, mitä "
-"olet tekemässä."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automaattinen uudelleenasetus"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Näytä nykyiset liitäntäasetukset"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Koneen `%s' nykyiset asetukset:\n"
-"\n"
-"Verkko: %s\n"
-"IP-osoite: %s\n"
-"IP-määreet: %s\n"
-"Ajuri: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Voin säilyttää nykyiset asetuksesi ja olettaa, että olet jo pystyttänyt DHCP-"
-"palvelimen. Siinä tapauksessa varmista että luen oikein C-luokan verkon, "
-"jota käytät paikallisverkkonasi, sillä en muuta sen asetuksia tai koske DHCP-"
-"palvelimesi asetuksiin.\n"
-"\n"
-"Muussa tapauksessa voin asettaa liitäntäsi ja asettaa (uudelleen) DHCP-"
-"palvelimen puolestasi.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-luokan paikallisverkko"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Tämän) DHCP-palvelimen IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Aseta liityntärajapinta ja DHCP-palvelin uudelleen"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Paikallisverkko ei loppunut '.0':aan, töydennetään."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Mahdollinen lähiverkon osoitetörmäys löydetty nykyisillä asetuksilla %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Palomuuri löydetty!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varoitus! Olemassaoleva palomuuri löydetty. Tarvitset mahdollisesti käsin "
-"tehtäviäkorjauksia asennuksen jälkeen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Määrittelen..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Määrittelen komentotiedostot, asennan ohjelmistot, käynnistän palvelimet..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Asennan pakettia %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kaikki asetettu.\n"
-"Voit nyt jakaa internetyhteyden muiden lähiverkon koneiden kanssakäyttämällä "
-"automaattista lähiverkon määrittelyä (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Asetukset on jo tehty, mutta ne ovat tällä hetkellä poistettu käytöstä."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Asetukset on jo tehty ja ne ovat käytössä."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetyhteyden jakamista ei ole koskaan asetettu."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Internetyhteyden jakamisen asetukset"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Tervetuloa internetyhteyden jakamisen apuohjelmaan!\n"
-"\n"
-"%s\n"
-"\n"
-"Paina Aseta käynnistääksesi asennusohjelman."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Verkon asetukset (%d-laitteille)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiili: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Poista profiili..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Valitse poistettava profiili:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Uusi profiili..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Luotavan profiilin nimi (uusi profiili luodaan kopioimalla nykyisen tiedot) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Koneen nimi:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetyhteys"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tyyppi:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Yhdyskäytävä:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Liitäntä:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Tila:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Odota hetki"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Määrittele internetyhteys..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Lähiverkon asetukset"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ajurit"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Liitäntä"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokolla"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Tila"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Aseta paikallisverkko..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Paina tähän käynnistääksesi asennusohjelman ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Velho..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Toteuta"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Odota hetki... Otetaan asetukset käyttöön"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Yhteys muodostettu"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ei yhteyttä"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Yhdistä..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Katkaise yhteys..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varoitus, toinen internet-yhteys on havaittu, mahdollisesti käyttäen sinun "
-"vekkoasi"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sinulla ei ole ainoatakaan asetettua liityntää.\n"
-"Aseta ne ensin klikkaamalla 'Aseta'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Lähiverkon asetukset"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Laite %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Käynnistysprotokolla"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Käynnistetty koneen käynnistämisen yhteydessä"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-asiakas"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivoi nyt"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivoi nyt"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Tätä liityntärajapintaa ei ole vielä asetettu.\n"
-"Käynnistä pääikkunasta löytyvä asetusvelho"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sinulla ei ole ainoatakaan internet-yhteyttä.\n"
-"Luo sellainen ensin klikkaamalla 'Aseta'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetyhteyden asetus"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetyhteyden asetus"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Yhteyden nimi: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrit"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Yhdyskäytävä"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Verkkokortti"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-asiakas"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Asetan turvatasoa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollipaneeli"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Valitse haluamasi työkalu"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "Yhdysvallat (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "Yhdysvallat (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "Yhdysvallat (hrc-kaapeli)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kiina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japani (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japani (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Itä-Eurooppa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanti"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Länsi-Eurooppa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Uusi-Seelanti"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Etelä-Afrikka"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentiina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Ole hyvä,\n"
-"kirjoita käyttämäsi tv-normi sekä asuinmaa"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-normi :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Alue :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "TV-kanavien haku käynnissä ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Haetaan TV-kanavia"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "käyttö: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Valitse näppäimistösi asettelu."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Haluatko BackSpace-näppäimen toimivan kuten Delete konsolissa?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vaihda CD-levyä"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Aseta asennuslevy CD-asemaan ja paina Ok.\n"
-"Jos sinulla ei ole levyä, paina Peruuta estääksesi järjestelmän päivityksen."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Järjestelmän päivitystä ei voida aloittaa!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Näytä vain valittu päivä"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Tiedosto/_Uusi"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>U"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Tiedosto/_Avaa"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Tiedosto/_Tallenna"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>T"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Tallenna _Nimellä"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Tiedosto/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Valinnat"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Valinnat/Testi"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ohje"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ohje/_Tietoja..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Käyttäjä"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Viestit"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Järjestelmäloki"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandraken työkälujen selitykset"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "etsi"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Työkalu lokien seuraamiseen"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Asetukset"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "täsmää"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mutta ei täsmää"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Valitse tiedosto"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalenteri"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Tiedoston sisältö"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Posti- ja SMS-hälytys"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "odota hetki, jäsennän tiedostoa : %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Posti- ja SMS-hälytyksen asetukset"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Tervetuloa sähköpostin ja SMS-viestien asettamisohjelmaan.\n"
-"\n"
-"Täällä voit pystyttää hälyytysjärjestelmän.\n"
-
-# ../../share/compssUsers
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Palveluiden asettaminen"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Saat hälytyksen kun jokin valituista palveluista ei ole enää käynnissä"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "lataa asetukset"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Saat hälytyksen jos kuorma on tätä arvoa suurempi"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "hälytyksen asetukset"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Aseta tapa, jolla järjestelmä hälyttää sinulle"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Tallenna nimellä.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Valitse hiiren tyyppi."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb:ta ei löytynyt\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuloi kolmatta näppäintä?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s löytyi paikasta %s, aseta se ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Valitse skanneri"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Tätä %s skanneria ei ole tuettu"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Käynnistyslaite"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Palomuurin asetukset"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Palomuurin asetukset"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Palomuurin asettaminen\n"
-"\n"
-"Olet jo määritellyt palomuurin. Paina \"Määrittele\" \n"
-"poistaaksesi palomuurin tai muuttaaksesi sen asetuksia"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Palomuurin asettaminen\n"
-"\n"
-"Paina \"Määrittele\" pystyyttääksesi palomuurin"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kieliasetukset"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Asennuksen luokka"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kiintolevyjen tunnistus"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Hiiren määrittely"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Näppäimistön valinta"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Tietoturva"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Tiedostojärjestelmät"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Levyjen osiointi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Asennettavat paketit"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Asenna järjestelmä"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Käyttäjien lisääminen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Verkkoasetukset"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Palvelujen asettaminen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Lataajan asetus"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Käynnistyslevyke"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Asenna X"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Asenna päivitykset"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Lopeta asennus"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewallin asettaminen\n"
-"\n"
-"Tämä vaihe asettaa henkilökohtaisen palomuurin Mandrake Linux\n"
-"-järjestelmääsi. Mikäli haluat tehokkaan palomuuriratkaisun, hae\n"
-"lisätietoja MandrakeSecurity Firewall distribuutiosta."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Tässä vaiheessa kysytään mitä palveluita haluat haluat sallia muille\n"
-"internetin käyttäjille siksi aikaa kun tietokoneesi on internetissä. \n"
-"Harkitse huolellisesti, ennen kuin vastaat näihin kysymyksiin,\n"
-"sillä nämä vaikuttavat tietokoneesi tietoturvaan.\n"
-"\n"
-"Jos et käytä tällä hetkellä ainoatakaan seuraavista palveluista,\n"
-"suojaa tietokoneesi palomuurilla. Voit muuttaa näitä asetuksia milloin \n"
-"haluat vain käynnistämällä tämän ohjelman uudelleen."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Onko tietokoneessasi webbisivuja, joiden haluat näkyvän kaikkialle\n"
-"internettiin? Jos ajat webbipalvelinta, jonka tarvitsee näkyä väin\n"
-"omalle tietokoneellesi, voit turvallisesti vastata EI tähän kysymykseen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Haluatko koneesi toimivan nimipalvelimena? Jos et halua pystyttää \n"
-"nimipalvelinta  jakamaan IP- ja vyöhyketietoja internettiin, vastaa ei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Haluatko sallia koneellesi tulevat Secure Shell (ssh) -yhteydet? Tämä\n"
-"on telnetin korvaava palvelu, jota voit käyttää kirjoittautuaksesi sisään\n"
-"internetin kautta. Jos käytät vielä telnetiä, sinun pitäisi vaihtaa se \n"
-"ssh:iin. Telnet-yhteydet eivät ole suojattuja -- hyökkääjä voi varastaa\n"
-"salasanasi, jos käytät sitä. Ssh-yhteys on sitävastoin suojattu, joten\n"
-"kukaan ei pysty salakuuntelemaan sitä."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Haluatko sallia sisään tulevat telnet-yhteydet?\n"
-"Tämä on hirvittävän vaarallista, kuten edellinen kohta osoitti.\n"
-"Suosittelemme että vastaisit Ei tähän kohtaan ja käyttäisit\n"
-"telnetin sijaan ssh:ta.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Ajatko tietokoneellasi FTP-palvelinta, jonka haluat näkyvän myös\n"
-"internettiin? Jos vastasit kyllä, suosittelemme, että käyttäisit sitä\n"
-"vain anonyymeihin siirtoihin. Mikä tahansa salasana voidaan varastaa,\n"
-"mikäli se siirretään FTP-protokollan kautta, sillä FTP ei suojaa\n"
-"siirrettäviä salasanoja.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Toimiiko tietokoneesi postipalvelimena? Jos lähetät sähköpostiviestisi\n"
-"pinen, muttin tai minkä tahansa tekstipohjaisen postinlukuohjelmiston\n"
-"avulla, se on todennäköistä. Muussa tapauksessa sinun pitäisi suojata\n"
-"ominaisuus pois palomuurin avulla.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Ajatko POP- tai IMAP-palvelinta koneellasi? Näitä palvelimia\n"
-"käytetään ylläpitämään ei-webbipohjaisia sähköpostitunnuksia\n"
-"ihmisille, jotka haluavat hakea postinsa tältä koneelta omillensa.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Käytät 2.2-sarjan Linuxin ydintä. Jos internetosoite (IP),\n"
-"jota tietokoneesi käyttää, asetetaan automaattisesti\n"
-"toisesta kotonasi tai työpaikallasi olevasta tietokoneesta\n"
-"(eli se on dynaamisesti määrätty), ominaisuuden käyttö \n"
-"pitää sallia. Pitääkö paikkaansa?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Onko tietokoneesi kello synkronoitu toisen tietokoneen kanssa?\n"
-"Useimmiten tätä ominaisuutta käytetään keskisuurissa Unix/Linux\n"
-"-organisaatioissa esimerkiksi lokin synkronointiin. Jos tietokoneesi\n"
-"ei ole osa suurempaa toimistoa tai et ole kuullut tällaisesta, \n"
-"järjestelmä ei luultavasti ole synkronoitu."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Asetukset tehty. Kirjoitetaanko muutokset levylle?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "En voi avata %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Tiedostoa %s ei voi avata kirjoittamista varten: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Palomuurin asetukset"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Valmistelen asennusta"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Verkkopääte (asiakas)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-, SMB-, SSH- ja välipalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Toimistosovellukset"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Työkalut Palm Pilotin tai Visorin liittämiseksi"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Palomuuri / Reititys"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nimipalvelin ja tietoverkon informaatiopalvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-ohjelmistot: tekstinkäsittely (kword, abiword), taulukkolaskenta "
-"(kspread,gnumeric), pdf-lukijat jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Äänenkäsittely: mp3, midi, mikserit, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Kirjoja ja ohjeita Linuxista sekä vapaan lähdekoodin ohjelmista"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Kokoelma työkaluja sähköpostiin, nyytisiin, webiin, tiedostonsiirtoon ja "
-"jutusteluun"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Tietokanta"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL tai MySQL tietokantapalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Työkalut, jotka helpottavat tietokoneesi asetusten muokkaamista"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Ääni"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Apuohjelmat"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentaatio"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Komentorivityökalut"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix-postipalvelin, Inn-nyytispalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-asema"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia-asema"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Asetustyökalut"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Lisää graafisia työpöytiä (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K-työpöytäympäristö. Graafinen perusympäristö ja sen mukana tulevat työkalut"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafinen ympäristö"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache WWW-palvelin ja Pro-ftpd FTP-palvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Työkalut CD:iden luomiseen ja polttamiseen"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Toimistotyöasema"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Palvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiikkaohjelmistot, kuten Gimp"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ja C++ ohjelmointityökalut, kirjastot ja include-tiedostot"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Verkkotietokone (palvelin)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Sähköposti/Groupware/Nyytiset"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Pelikone"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videon katselu ja editointi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafiikka"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Pelit: tasohyppely, korttipelit, strategia, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Valikoima työkaluja sähköpostin ja nyytisten lukemiseen (pine, mutt, tin...) "
-"sekä internetissä surffailuun"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Varmuuskopiointi, emulaattorit, järjestelmän tarkkailu"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Henkilökohtainen kirjanpito"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Graafinen ympäristö käyttäjäystävällisellä ohjelmistolla ja työkaluilla."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Asiakasohjelmat eri protokollille (ssh jne)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetyhdyskäytävä"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Äänen sekä videon soitto- ja editointiohjelmat"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Muut graafiset käyttöympäristöt"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorit, komentotulkit, tiedostotyökalut, terminaalit"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Tilinpito-ohjelmia, kuten gnucash"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Henkilökohteisen tiedon hallinta"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD:n poltto"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tieteelliinen työasema"
-
-#~ msgid "About"
-#~ msgstr "Tietoja"
-
-#~ msgid "             Help           "
-#~ msgstr "             Apua           "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr "Ei saantia käytössä olevan ytimen moduuleihin (tiedosto %s puuttuu)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ei asetettu"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Valitse oletustulostin !"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Toteuta/Lue uudelleen tulostimet"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Voit antaa lisäasetuksia modulille %s."
-
-#~ msgid "Low"
-#~ msgstr "Matala"
-
-#~ msgid "Medium"
-#~ msgstr "Keskitaso"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Muutamia parannuksia tällä turvaasolla, suurimpana se että "
-#~ "järjestelmässä\n"
-#~ "on enemmän turvallisuusvaroituksia ja tarkistuksia."
-
-#~ msgid "mount failed"
-#~ msgstr "liittäminen epäonnistui"
-
-#~ msgid "Boot mode"
-#~ msgstr "Käynnistila"
-
-#~ msgid "Export"
-#~ msgstr "Vie"
-
-#~ msgid "click here"
-#~ msgstr "klikkaa tähän"
diff --git a/perl-install/share/po/fr.po b/perl-install/share/po/fr.po
deleted file mode 100644
index abfe2a8c9..000000000
--- a/perl-install/share/po/fr.po
+++ /dev/null
@@ -1,12589 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# David BAUDENS <baudens@mandrakesoft.com>, 1999-2002
-# David ODIN <odin@mandrakesoft.com>, 2000
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 2001
-# KAtiOS <katios@nolabel.net>, 2001
-# Guillaume Cottenceau <gc@mandrakesoft.com>, 2001-2002
-# Thierry Vignaud <tvignaud@mandrakesoft.com>, 2001-2002
-# Combelles Christophe <ccomb@club-internet.fr>, 2002
-#
-# Veuillez ne pas mettre à jour ce fichier à moins d'être
-# certain tant de vos traductions que de votre grammaire et
-# de votre orthographe. Ces dernières sont trop souvent
-# approximatives. Elles nécessitent alors des relectures et
-# des corrections qui n'ont d'autre conséquence que de faire
-# perdre du temps à tout le monde (à vous si votre travail est
-# imparfait et aux relecteurs qui doivent rechercher puis corriger
-# vos éventuelles fautes).
-#
-# VEUILLEZ RESPECTER LA TYPOGRAPHIE FRANÇAISE !
-# Les majuscules doivent être accentuées si besoin est. Respectez
-# les espaces nécessaires pour la ponctuation (espace après la virgule et
-# le point, espace insécables avant les points d'interrogation,
-# d'exclamation, les deux-points et le point virgule, espace aussi après
-# le point virgule).
-#
-# ESPACES INSÉCABLES
-# Vous devez utiliser un espace insécable (c'est un espace qui ne peut
-# pas servir de rupture à la ligne) avant le point d'exclamation, le
-# point d'interrogation, le deux-points, le point virgules, et pour les
-# "quantités", entre le nombre et l'unité abbrégée (par exemple "10 g").
-# L'espace normal en ISO et UTF8 est le caractere 0x20 tandis que l'espace
-# insécable est le caractère 0xA0. Sous Emacs en utilisant le po mode
-# livré avec gettext >= 0.10.40-4mdk vous pouvez voir celui-ci avec un
-# fond de couleur spécial. Sous Vi celui-ci est normalement affiché
-# précédé du caractère pipe "|". Pour le tapper sous la plupart des
-# éditeurs, vous pouvez utiliser la touche "Compose" puis en tappant
-# deux espaces. Si vous n'avez pas de touche compose, vous pouvez
-# donner cette fonction à la touche "Windows" droite de votre clavier
-# avec la commande suivante :
-#   xmodmap -e 'keycode 116 = Multi_key'
-#
-# Les guillemets françaises sont « et » et non ". La guillemet ouvrante
-# « est suivie d'un espace insécable et la guillemet fermante » est
-# précédée du même type d'espace. Pour le tapper, vous pouvez utiliser
-# la combinaison Compose < <, et Compose > >.
-#
-# Enfin, traduisez INTELLIGEMMENT et non mot à mot. Certaines traductions
-# n'ont aucun sens en français.
-#
-# Nous vous remercions de votre compréhension.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX for MDK 8.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-06 01:36GMT+1\n"
-"Last-Translator: Combelles Christophe <ccomb@club-internet.fr>\n"
-"Language-Team: french <fr@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurer les écrans séparément"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Étaler l'affichage sur plusieurs écrans (Xinerama)"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurer seulement la carte « %s » (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuration multi-écrans"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Votre système peut utiliser simultanément plusieurs écrans.\n"
-"Que souhaitez-vous faire ?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Carte graphique"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Choisissez une carte graphique"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Choisissez un serveur d'affichage (serveur XFree)"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "serveur XFree"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Choisissez un pilote d'affichage X11"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "serveur X11"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quelle configuration d'XFree désirez-vous utiliser ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Votre carte vidéo est supportée par XFree %s. Ce dernier peut être plus\n"
-"performant en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle avec XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s avec accélération 3D matérielle"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle en utilisant\n"
-"XFree %s.\n"
-"Veuillez noter que ce support est EXPÉRIMENTAL et qu'il peut BLOQUER VOTRE\n"
-"ORDINATEUR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s avec support EXPÉRIMENTAL de l'accélération 3D matérielle"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Attention, veuillez noter que ce support est EXPÉRIMENTAL et peut BLOQUER\n"
-"VOTRE ORDINATEUR.\n"
-"\n"
-"Votre carte vidéo est supportée par XFree %s. Ce dernier peut être plus\n"
-"performant en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation du pilote d'affichage)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuration d'XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr ""
-"Veuillez préciser la quantité de mémoire vidéo de votre carte graphique"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Choisissez les options du serveur d'affichage"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Choisissez un moniteur"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Moniteur"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Les deux paramètres importants sont la fréquence de rafraîchissement\n"
-"verticale (qui détermine la vitesse à laquelle l'écran est rafraîchi)\n"
-"et, surtout, la fréquence de synchronisation horizontale (qui détermine\n"
-"la vitesse à laquelle les lignes sont tracées).\n"
-"\n"
-"Il ne faut SURTOUT PAS choisir un type de moniteur ayant\n"
-"une fréquence de rafraîchissement excédant les capacités de votre\n"
-"moniteur. Vous risqueriez de l'endommager.\n"
-"En cas de doute, choisissez un réglage moins performant mais\n"
-"sans risque pour votre matériel."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Fréquence horizontale"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Fréquence verticale"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Le moniteur n'est pas configuré"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La carte graphique n'est pas encore configurée"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "La résolution n'a pas encore été choisie"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Désirez-vous tester la configuration ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Attention : tester cette carte vidéo peut bloquer votre ordinateur"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test de la configuration"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"essayez de modifier quelques paramètres"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Une erreur est survenue :"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Fin du test dans %d secondes"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Êtes-vous satisfait(e) ?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-"Une erreur est survenue, essayez de modifier\n"
-"quelques paramètres"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Résolution"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Choix de la résolution et du nombre de couleurs"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carte graphique : %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Serveur XFree86 : %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Davantage"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Tout montrer"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Résolutions"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Type de clavier : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Type de souris : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Périphérique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Moniteur : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Fréquence horizontale : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Fréquence verticale : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carte graphique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Indentification de la carte graphique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Mémoire vidéo : %s ko\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Nombre de couleurs : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Résolution : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Serveur XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Pilote XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Préparation de la configuration de X Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Que désirez-vous faire ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Choisir un type de moniteur"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Choisir un type de carte graphique"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Changer les options du serveur d'affichage"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Changer la résolution"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Afficher la configuration actuelle"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Tester à nouveau"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Quitter"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Désirez-vous conserver les changements ?\n"
-"La configuration actuelle est :\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Interface graphique lors du démarrage"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Voulez-vous que l'interface graphique soit\n"
-"automatiquement lancée lors du démarrage ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Veuillez relancer %s pour activer les changements"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Veuillez vous déconnecter puis presser simultanément les touches Ctrl-Alt-"
-"BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 couleurs (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 768 couleurs (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 536 couleurs (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16,7 millions de couleurs (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4,3 milliards de couleurs (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mo ou plus"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 à 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 à 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 à 87 Hz entrelacé (sans 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 à 87 Hz entrelacé, 800x600 à 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA étendu, 800x600 à 60 Hz, 640x480 à 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non entrelacé, 1024x768 à 60 Hz, 800x600 à 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA haute fréquence, 1024x768 à 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 à 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 à 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 à 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Moniteur supportant le 1600x1200 à 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Moniteur supportant le 1600x1200 à 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Premier secteur de la partition d'amorçage"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Premier secteur du disque (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Installation de SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Où désirez-vous installer le programme d'amorçage ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Installation de LILO ou Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO en mode texte"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO en mode graphique"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Démarrer à partir de DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Principales options du programme d'amorçage"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Programme d'amorçage à utiliser"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installation du programme d'amorçage"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Périphérique d'amorçage"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne fonctionne pas avec des BIOS anciens)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mode vidéo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Délai avant l'activation du choix par défaut"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Mot de passe"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Mot de passe (vérif)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Protéger par mot de passe les options"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "Protection des options"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Vider le dossier /tmp à chaque démarrage"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Précisez la taille mémoire si nécessaire (%d Mo trouvés)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Autoriser plusieurs profils"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Indiquez la quantité de mémoire en Mo"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Le protection des options est inutile sans mot de passe"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Veuillez réessayer"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Les mots de passe ne correspondent pas"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Message de démarrage"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Délai de l'Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Délai d'amorçage du noyau"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Autoriser le démarrage sur CD ?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Autoriser le démarrage sur l'OF ?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS par défaut ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Vous avez décidé d'installer le programme d'amorçage sur une partition.\n"
-"Cela implique que vous ayez déjà un programme d'amorçage sur le disque dur "
-"sur lequel le système démarre (ie: System Commander).\n"
-"\n"
-"Sur quel disque est-ce que le système démarre ?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Voici les différentes entrées.\n"
-"Vous pouvez en rajouter de nouvelles ou changer les entrées existantes."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ajouter"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Terminer"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifier l'élément sélectionné"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Quel type de système voulez-vous ajouter ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Autres systèmes (SunOS, etc.)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Autres systèmes (MacOS, etc.)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Autres systèmes (Windows, etc.)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "fichier noyau"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Partition racine"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "options passées au noyau"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Fichier RamDisk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Préactivé en écriture"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table des partitions"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Peu sûr"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Choix par défaut"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Taille du RamDisk"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Supprimer l'entrée"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Un label vide n'est pas autorisé"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Vous devez spécifier l'image noyau désirée"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Vous devez spécifier une partition racine"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ce label est déjà utilisé"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interface(s) %s %s détectée(s)"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "En possédez-vous d'autres ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Possédez-vous des interfaces %s ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Non"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Oui"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Voir les informations sur le matériel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation du pilote pour la carte %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quel pilote %s faut-il essayer ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Le pilote de matériel « %s » a parfois besoin d'options supplémentaires\n"
-"pour fonctionner de manière optimale.\n"
-"Vous pouvez lui fournir manuellement ces options,\n"
-"ou bien lui laisser les détecter automatiquement.\n"
-"(La détection peut dans certains cas bloquer l'ordinateur,\n"
-"mais sans lui causer de dommage.)"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Détection automatique"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spécifier des options"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Vous pouvez maintenant founir des options au module %s.\n"
-"Veuillez noter que les adresses doivent être généralement préfixées de 0x, "
-"comme '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Vous pouvez maintenant préciser les options du module %s.\n"
-"Les options sont de la forme « nom=valeur nom2=valeur2 ... ».\n"
-"Par exemple, « io=0x300 irq=7 »"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Options du module :"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Le chargement du module %s a échoué.\n"
-"Désirez-vous réessayer avec d'autres paramètres ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "accès aux programmes graphiques"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "accès aux outils rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "autoriser « su »"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "accès aux fichiers d'administration"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "Utilisateur(s) existant(s) : %s"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ce mot de passe est trop simple"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Veuillez taper un nom d'utilisateur"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Le nom d'utilisateur ne peut contenir que des lettres minuscules,\n"
-"des nombres, ainsi que les caractères « - » et « _ »"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ce nom d'utilisateur est déjà utilisé"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ajouter un utilisateur"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Créer un compte utilisateur\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accepter"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nom et prénom"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nom d'utilisateur"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Interpréteur"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icône"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Connexion automatique"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Lors du démarrage, voulez-vous que le système connecte\n"
-"automatiquement un utilisateur par défaut ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Choisissez l'utilisateur par défaut :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Choisissez l'environnement graphique :"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Choisissez la langue :"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vous pouvez choisir d'autres langues.\n"
-"Elles seront disponibles après l'installation."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tout"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Autoriser tous les utilisateurs"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personnalisée"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Pas de partage"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Le paquetage %s doit être installé. Voulez-vous l'installer ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Voulez-vous exporter par NFS (protocole Unix) ou SMB (protocole Windows)?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Le paquetage %s, qui est obligatoire, est manquant"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Voulez-vous permettre aux utilisateurs de partager certains sous-répertoires de leur répertoire personnel (/home) ?\n"
-"Permettre cela autorisera les utilisateurs à cliquer simplement sur « Partager » dans konqueror et nautilus.\n"
-"\n"
-"« Personnalisée » permet de choisir pour chaque utilisateur.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annuler"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Lancer userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Le partage par utilisateur utilise le groupe « fileshare ».\n"
-"Vous pouvez utiliser userdrake pour rajouter un utilisater dans ce groupe."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bienvenue aux pirates"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Très faible"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Élevée"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Plus élevée"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoïaque"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ce niveau de sécurité doit être utilisé avec précaution. Il rend votre\n"
-"système plus facile à utiliser, aux dépens de la sécurité. Il ne devrait\n"
-"donc pas être utilisé sur une machine connectée à un réseau ou à "
-"l'internet.\n"
-"Aucun mot de passe n'est requis."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Les mots de passe sont maintenant requis. Pour autant, il n'est pas\n"
-"recommandé d'utiliser cette machine sur un réseau."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ceci est le niveau de sécurité standard recommandé pour un ordinateur \n"
-"utilisé pour se connecter à l'internet en tant que client."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Il y a déjà des restrictions, et des vérifications automatiques sont "
-"effectuées chaque nuit."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Avec ce niveau de sécurité, l'utilisation de cette machine en tant que\n"
-"serveur devient envisageable. La sécurisation est suffisamment forte pour\n"
-"accepter les connexions de nombreux clients. Note : si votre machine est\n"
-"seulement connectée en tant que client sur Internet, vous devriez plutôt\n"
-"choisir un niveau inférieur."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ce niveau de sécurité est basé sur le précédent mais le système est "
-"maintenant\n"
-"complètement clos (vu du réseau). La sécurité est maximale."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Choisissez le niveau de sécurité"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Niveau de sécurité"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Utilisation de « libsafe » pour les serveurs"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Une bibliothèque qui protège contre les attaques par débordement de pile.\n"
-"(les plus fréquentes)"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bienvenue dans %s, le chargeur de systemes d'exploitation.\n"
-"\n"
-"Choisissez un systeme d'exploitation dans la liste ci-dessus.\n"
-"-- Demarrage automatique dans %d secondes.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bienvenue dans GRUB, le chargeur de systemes d'exploitation"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Utilisez les touches %c et %c pour faire votre choix."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Appuyez sur <Entree> pour demarrer, sur <e> pour modifier la"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commande de demarrage ou sur <c> pour utiliser la ligne de commande."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Demarrage automatique dans %d secondes."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "il n'y a pas assez de place dans le dossier /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Bureau"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu Démarrer"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Vous ne pouvez pas installer le programme d'amorçage\n"
-"sur une partition %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pas d'aide disponible pour l'instant.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuration du style de démarrage"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fichier"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fichier/_Quitter"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Moniteur nouveau style avec catégorisation"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Moniteur nouveau style"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Moniteur traditionnel"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Moniteur traditionnel Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Démarrage entièrement graphique (Aurora)"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Menu d'amorçage"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Menu d'amorçage"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Le choix du système d'exploitation est actuellement géré par %s.\n"
-"Vous pouvez ici modifier la liste du menu d'amorçage."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurer"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Choix pour l'interface utilisateur"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lancer l'interface graphique au démarrage"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne pas connecter automatiquement un utilisateur"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Connexion automatique (choisir utilisateur et environnement)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Impossible de lire le fichier /etc/inittab  : %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Go"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Ko"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mo"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "To"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutes"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d secondes"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Impossible de faire des captures d'écran avant le partitionnement"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Les captures d'écran seront disponibles après l'installation dans %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "France"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgique"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "République Tchèque"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Allemagne"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grèce"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvège"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suède"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Pays-Bas"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italie"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Autriche"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "États-Unis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-"Avant d'utiliser un logiciel de partitionnement de disques,\n"
-"il est prudent de faire une copie de sauvegarde de vos données !!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "MISE EN GARDE"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si vous voulez utiliser « aboot », vous devez réserver\n"
-"un espace libre d'au moins 2048 secteurs au début du disque."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erreur"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistant"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Choisissez une action"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Votre disque possède une seule grande partition, qui est de type FAT\n"
-"(généralement utilisé par Microsoft DOS ou Windows).\n"
-"Vous devriez la réduire pour pouvoir créer d'autres partitions :\n"
-"cliquez sur la partition puis sur « Redimensionner »."
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Veuillez cliquer sur une partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Détails"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "SF journalisé"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vide"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Autre"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Types des systèmes de fichiers :"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Créer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilisez plutôt « %s »"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Supprimer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Cliquez d'abord sur « Démonter »"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Après avoir modifié le type de la partition %s, toutes les données\n"
-"présentes sur cette partition seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Choisissez une partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Choisissez une autre partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Quitter"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Passer en mode expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Passer en mode normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "État précédent"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Désirez-vous tout de même continuer ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Quitter sans sauvegarder"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Désirez-vous réellement quitter sans écrire la table des partitions ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Désirez-vous sauvegarder les modifications de /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Partitionnement automatique"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Supprimer toutes les partitions"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informations sur les disques durs"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Toutes les partitions primaires sont utilisées"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Impossible d'ajouter une partition"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Pour pouvoir utiliser plus de partitions, vous devez d'abord en supprimer "
-"une pour la remplacer par une partition étendue."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Sauvegarder la table des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Charger une table des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Deviner automatiquement la table des partitions"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Relire la table des partitions"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Auto-montage des périphériques amovibles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Sélectionnez un fichier"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La table des partitions contenue sur la sauvegarde\n"
-"n'a pas la même taille que le disque.\n"
-"Désirez-vous tout de même continuer ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Attention"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insérez une disquette dans le lecteur.\n"
-"Toutes les données présentes sur cette disquette seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentative de lecture de l'organisation des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informations détaillées"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Point de montage"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Options"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionner"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Déplacer"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formater"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ajouter au RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ajouter au LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Démonter"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Supprimer du RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Supprimer du LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifier le RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Utiliser pour loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Créer une nouvelle partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Secteur de début : "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Taille en Mo : "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Type du système de fichiers : "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Point de montage : "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Préférence : "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Supprimer le fichier loopback ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Changement du type de partition"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Quel système de fichiers désirez-vous utiliser ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Passage de ext2 à ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Où désirez-vous monter le fichier loopback %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Où désirez-vous monter la partition %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Il est impossible de désélectionner ce point de montage car il est\n"
-"utilisé pour le loopback. Veuillez supprimer ce dernier d'abord."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calcul des limites du système de fichiers FAT ..."
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionnement"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Cette partition ne peut pas être redimensionnée"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Toutes les données présentes sur cette partition\n"
-"devraient avoir été sauvegardées."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Après avoir redimensionné la partition %s, toutes les données présentes\n"
-"sur cette partition seront perdues"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Choisissez la nouvelle taille"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nouvelle taille en Mo : "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Sur quel disque voulez-vous la déplacer ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Secteur"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Sur quel secteur voulez-vous la déplacer ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Déplacement"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Déplacement de la partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Choisissez un RAID existant"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "Nouveau"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Choisissez un LVM existant"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nom LVM ?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Cette partition ne peut pas être utilisée pour du loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nom du fichier loopback :"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Donnez un nom de fichier"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ce fichier est déjà utilisé par un autre loopback.\n"
-"Veuillez en choisir un autre."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Le fichier existe déjà. Faut-il l'utiliser ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Options de montage"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Divers"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "Périphérique"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "Niveau de RAID"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Taille de bloc"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Soyez prudent : cette opération est dangereuse."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Quel type de partitionnement ?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Le programme d'amorçage LILO ne peut pas fonctionner si vous placez\n"
-"la partition du dossier /boot aussi loin sur le disque (c'est-à-dire\n"
-"au delà du 1024ème cylindre). Si vous n'utilisez pas LILO, vous n'avez\n"
-"pas besoin de partition spécifique pour le dossier /boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Attention, votre partition racine se situe au delà du 1024ème cylindre.\n"
-"Si vous comptez utiliser le programme d'amorçage LILO, vous devez créer\n"
-"une autre partition juste pour le dossier /boot en deçà du 1024ème cylindre."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Attention, vous avez choisi une partition RAID logiciel comme partition\n"
-"racine. Pour que votre système puisse démarrer, vous devez ajouter\n"
-"une partition non RAID, spécifique pour le dossier /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-"La table des partitions de %s va maintenant être écrite sur le disque !"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Vous devez redémarrer pour que les modifications soient prises en compte"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Après avoir formaté la partition %s, toutes les données présentes\n"
-"sur cette partition seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatage"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatage du fichier loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatage de la partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Cacher les fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Déplacer les fichiers sur la nouvelle partition"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Le dossier %s contient déjà des données\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Déplacement des fichiers sur la nouvelle partition..."
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copie de %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Suppression de %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partition %s est maintenant connue comme %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Périphérique : "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lettre de lecteur DOS supposée : %s:\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Type : "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nom : "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Début : secteur %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Taille : %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s secteurs"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylindre %d à %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatée\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Non formatée\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montée\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "Appartient au RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Fichier(s) loopback :\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition d'amorçage par défaut\n"
-"(pour DOS/Windows, pas pour LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "RAID de niveau %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Taille de bloc %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "disques RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom du fichier loopback : %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Il y a des chances que cette partition\n"
-"soit une partition de pilotes systèmes,\n"
-"vous ne devriez pas la toucher.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Cette partition d'amorçage (bootstrap)\n"
-"est nécessaire si vous avez plusieurs\n"
-"systèmes d'exploitation. \n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Taille : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Géométrie : %s cylindres, %s têtes, %s secteurs\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Information : "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "disques LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Table des partitions de type : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "sur bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Options : %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Clef de chiffrement du système de fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Choisissez la clef de chiffrement du système de fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Cette clef de chiffrement est trop courte (minimum %d caractères)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Les clefs de chiffrement ne correspondent pas"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Clef de chiffrement"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Clef de chiffrement (confirmation)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Changer le type"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Veuillez cliquer sur une source"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Rechercher les serveurs"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "le formatage au format %s de %s a échoué"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Impossible de formater %s au format %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "le montage de la partition %s dans le répertoire %s a échoué"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck a échoué avec le code de sortie %d ou le signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Le démontage de %s a échoué : %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "avec /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveur"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Les partitions JFS doivent faire plus de 16 Mo."
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Les partitions ReiserFS doivent faire plus de 32 Mo."
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Les points de montage doivent commencer par /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Le point de montage %s est déjà utilisé\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser une partition logique LVM pour le point de "
-"montage %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ce dossier devrait rester dans la partition racine"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Vous avez besoin d'un vrai système de fichiers (ext2, reiserfs) pour ce "
-"point de montage\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser de système de fichiers crypté pour le point de "
-"montage %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Pas assez d'espace libre pour le partitionnement automatique"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Rien à faire"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erreur lors de l'ouverture de %s en écriture : %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Une erreur est survenue : aucun périphérique valide n'a été trouvé pour\n"
-"créer de nouvelles partitions. Veuillez vérifier votre matériel."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Vous n'avez défini aucune partition !"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux est un système multi-utilisateurs, ce qui signifie généralement que chaque\n"
-"utilisateur peut avoir des préférences différences, ses propres fichiers,\n"
-"etc. Pour plus d'informations, consultez le manuel d'utilisation.\n"
-"Contrairement à « root » qui a tous les droits, les utilisateurs que vous\n"
-"ajouterez ici n'auront que des permissions pour agir sur leurs propres\n"
-"fichiers exclusivement.\n"
-"\n"
-"L'utilisateur/administrateur devrait également se créer un compte\n"
-"« normal ». C'est à travers cet utilisateur que celui-ci devrait se\n"
-"connecter pour accomplir ses tâches quotidiennes. Car, bien qu'il soit\n"
-"pratique d'avoir tous les accès, cette situation peut également engendrer\n"
-"des situations désastreuses si un fichier est détruit par inadvertance. Un\n"
-"utilisateur normal n'ayant pas accès aux fichiers sensibles, ne peut causer\n"
-"de dommages majeurs.\n"
-"\n"
-"Il faut d'abord entrer le vrai nom de la personne. Évidemment, vous pouvez\n"
-"y inscrire n'importe quoi. DrakX prendra le premier mot inséré et le\n"
-"transposera comme « Nom de login ». C'est le nom qui sera utilisé pour se\n"
-"connecter au système. Vous pouvez le modifier. Il faut maintenant entrer un\n"
-"mot de passe. Celui-ci n'est pas aussi crucial que le mot de passe de\n"
-"« root », mais ce n'est pas une raison pour rentrer 123456. Après tout,\n"
-"ceci mettrait vos fichiers en péril.\n"
-"\n"
-"Si vous cliquez « Accepter », il vous sera possible d'ajouter d'autres\n"
-"utilisateurs. Créez un utilisateur différent pour chaque personne devant\n"
-"utiliser votre ordinateur. Une fois chaque utilisateur défini, cliquez sur\n"
-"« Terminer ».\n"
-"\n"
-"En cliquant sur « Avancé », vous pourrez sélectionner un « shell »\n"
-"différent pour cet utilisateur (bash est assigné par défaut)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ci-dessus sont listées les partitions linux existantes détectées sur votre "
-"système.\n"
-"Vous pouvez garder les choix faits par l'assistant, ils sont corrects pour "
-"la plupart\n"
-"des installations courantes. Si vous changez quoi que ce soit, vous devez au "
-"moins\n"
-"définir une partition racine « / ». Ne choisissez pas une partition trop "
-"petite, sinon\n"
-"vous ne pourrez pas installer assez de logiciels. Si vous voulez stocker vos "
-"données\n"
-"sur une partition séparée, vous devrez également créer une partition pour le "
-"dossier\n"
-"« /home » (seulement possible si vous avez au moins deux partitions linux "
-"disponibles).\n"
-"\n"
-"Chaque partition est décrite comme suit : « Nom », « Capacité ».\n"
-"\n"
-"Le « Nom » est codé comme suit : « type du disque dur »,\n"
-"« numéro du disque dur », « numéro de la partition » (par exemple,\n"
-"« hda1 »).\n"
-"\n"
-"Le « type du disque dur » est « hd » si votre disque dur\n"
-"est un disque dur IDE ou « sd » s'il s'agit d'un disque SCSI.\n"
-"\n"
-"Le « numéro du disque dur » est toujours une lettre qui suit « hd » ou « sd "
-"» :\n"
-"- avec un disque dur IDE,\n"
-"   * « a » signifie « disque maître sur le premier port IDE »,\n"
-"   * « b » signifie « disque esclave sur le premier port IDE »,\n"
-"   * « c » signifie « disque maître sur le second port IDE »,\n"
-"   * « d » signifie « disque esclave sur le second port IDE ».\n"
-"- avec un disque dur SCSI, un « a » signifie « premier disque dur »,\n"
-"« b » signifie « second disque dur », etc. dans l'ordre des IDs SCSI»."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Les paquetages requis à l'installation de Mandrake Linux sont distribués sur plusieurs\n"
-"CDROM. Heureusement, DrakX connaît l'emplacement de chacun des paquetages.\n"
-"Il éjectera celui présent dans le lecteur et vous demandera d'insérer le\n"
-"CDROM approprié, selon le cas."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"C'est maintenant le moment de choisir les paquetages qui seront installés\n"
-"sur votre système. Sachez que Mandrake Linux contient plusieurs milliers de paquetages à\n"
-"installer, et qu'il n'est pas nécessaire de tous les connaître par coeur.\n"
-"\n"
-"Si vous êtes en train de faire une installation normale à partir d'un\n"
-"CDROM, il vous sera d'abord demandé de spécifier quel CD vous avez (en mode\n"
-"Expert). Vérifier les étiquettes et cliquez sur les boîtes leur étant\n"
-"associées. Cliquez sur « OK », lorsque vous êtes prêt à continuer.\n"
-"\n"
-"Les paquetages sont regroupés selon la nature de l'installation. Les\n"
-"groupes sont divisés en quatre sections principales:\n"
-"\n"
-" * « Station de travail »: si vous comptez utiliser votre machine ainsi,\n"
-"sélectionner un ou plusieurs groupes y correspondant.\n"
-"\n"
-" * « Environnement graphique »: ce groupe vous permettra de déterminer quel\n"
-"environnement graphique vous voulez avoir sur votre système. Évidemment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-" * « Développement »: si votre système sera utilisé pour la programmation,\n"
-"choisissez les groupes désirés.\n"
-"\n"
-" * « Serveur »: finalement, si vous système doit agir en tant que serveur,\n"
-"vous pourrez sélectionner les services que vous voulez installer.\n"
-"\n"
-" * « Environnement graphique »: ce groupe vous permettra de déterminer quel\n"
-"environnement graphique vous voulez avoir sur votre système. Évidemment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-"En plaçant votre souris au dessus d'un nom de groupe, vous verrez\n"
-"apparaître une courte description de ce groupe. Si vous désélectionnez tous\n"
-"les groupes lors d'une installation standard (par opposition à une mise à\n"
-"jour), un dialogue apparaîtra proposant différentes options pour une\n"
-"installation minimale:\n"
-"\n"
-" * « Avec X »: installe le moins de paquetages possible pour avoir un\n"
-"environnement de travail graphique;\n"
-"\n"
-" * « Avec la documentation de base »: installe le système de base plus\n"
-"certains utilitaires de base et leur documentation. Cette installation est\n"
-"utilisable comme base pour monter un serveur;\n"
-"\n"
-" * « Installation vraiment minimale »: installera le strict minimum\n"
-"nécessaire pour obtenir un système fonctionnel, en ligne de commande. Cette\n"
-"installation prends à peu près 65Mo.\n"
-"\n"
-"Vous pouvez finalement cocher l'option « Sélection individuelle des\n"
-"paquetages ». Cette option est à utiliser si vous connaissez exactement le\n"
-"paquetage désiré ou si vous voulez avoir le contrôle total de votre\n"
-"installation.\n"
-"\n"
-"Si vous avez démarré l'installation en mode \"mise à jour\", vous pouvez\n"
-"\"dé-sélectionner\" tous les groupes afin d'éviter l'installation de\n"
-"nouveaux programmes. Cette option est très utile pour restaurer un système\n"
-"défectueux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalement, si vous avez choisi de sélectionner individuellement les\n"
-"paquetages à installer, DrakX vous présentera un arbre contenant tous les\n"
-"paquetages, classés par groupes et sous-groupes. En naviguant à travers\n"
-"l'arbre, vous pouvez sélectionner des groupes, des sous-groupes ou des\n"
-"paquetages individuels.\n"
-"\n"
-"Dès que vous sélectionnez un paquetage dans l'arbre, une descriptions\n"
-"apparaît à droite. Une fois votre sélection complétée, cliquez sur\n"
-"« Installation » pour lancer le processus. Soyez patient, car en fonction\n"
-"du type d'installation choisi ou du nombre de paquetages sélectionnés, le\n"
-"temps requis peut être substantiellement différent. Une estimation du temps\n"
-"requis est présentée sur l'écran en cours d'opération afin de vous\n"
-"permettre d'évaluer de combien de temps vous disposez pour prendre votre\n"
-"déjeuner.\n"
-"\n"
-"!! Si un logiciel serveur a été sélectionné, vous devrez confirmer que vous\n"
-"voulez vraiment que celui-ci soit installé. Sous Mandrake, par défaut, tous\n"
-"les serveurs installés sont lancés au démarrage. Malgré tous les efforts\n"
-"investis pour vous livrer une distribution Linux sécuritaire, il est\n"
-"possible que certaines failles de sécurité affectes les serveurs installés\n"
-"au-delà de la date de publication. Si vous ne savez pas précisément à quoi\n"
-"sert un serveur en particulier ou pourquoi il est installé, cliquez sur\n"
-"« NON ». En cliquant sur « OUI », le serveur sera installé et le service\n"
-"rendu disponible au démarrage. !!\n"
-"\n"
-"L'option « Dépendances automatiques » désactive les avertissements qui\n"
-"apparaissent à chaque fois que l'installeur sélectionne un nouveau paquet.\n"
-"Ces avertissements surviennent parce que DrakX a déterminé que pour qu'un\n"
-"paquetage soit fonctionnel, il lui en faut un autre dont il est dépendant.\n"
-"\n"
-"La petite icône de disquette qui apparaît au bas de la liste permet de\n"
-"récupérer une liste de paquetages sélectionnés durant une autre\n"
-"installation. En cliquant dessus, on vous demandera d'insérer la disquette\n"
-"créée lors d'une installation précédente. Voir la deuxième note de la\n"
-"dernière étape afin de savoir comment créer une telle disquette."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Si vous désirez connecter votre système à un réseau ou à l'Internet,\n"
-"cliquez sur « OK ». L'autodétection des périphériques réseau et modems sera\n"
-"alors lancée. Si cette détection échoue, décochez la case « Utiliser\n"
-"l'autodétection ». Vous pouvez aussi choisir de ne pas configurer le\n"
-"réseau, ou de le faire plus tard. Dans ce cas, cliquez simplement sur\n"
-"« Annuler ».\n"
-"\n"
-"Les types de connexion supportées sont: modem téléphonique, modem ISDN,\n"
-"connexion ADSL, modem câble ou simplement LAN (réseau ethernet).\n"
-"\n"
-"Nous ne détaillerons pas ici chacune des configurations possible. Assurez\n"
-"vous seulement que vous avez toutes les informations de votre fournisseur\n"
-"de service Internet à portée de main.\n"
-"\n"
-"Vous pouvez consulter le chapitre du «Guide de l'utilisateur» concernant les connexions à Internet\n"
-"pour plus de détails à propos des configurations spécifiques de chaque type\n"
-"de connexion. Vous pouvez également configurer votre connexion à Internet\n"
-"une fois l'installation terminée.\n"
-"\n"
-"Si vous désirez configurer votre réseau plus tard ou si vous avez terminé\n"
-"l'installation de votre réseau, cliquez sur « Annuler »."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Vous pouvez maintenant choisir les services disponibles au démarrage de\n"
-"votre système.\n"
-"\n"
-"Ici sont présentés tous les services disponibles avec l'installation en\n"
-"place. Faites une bonne vérification et enlevez tout ce qui n'est pas\n"
-"absolument nécessaire au démarrage du système.\n"
-"\n"
-"Vous pouvez obtenir une courte explication des services en les\n"
-"sélectionnant spécifiquement. Cela dit, si vous n'êtes pas certain de\n"
-"l'application d'un service, conservez les paramètres par défaut\n"
-"\n"
-"!! À cette étape, soyez particulièrement attentif dans le cas d'un système\n"
-"destiné à agir comme serveur. Dans ce cas, vous voudrez probablement\n"
-"permettre exclusivement les services nécessaires. !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU-Linux manipule l'heure au format GMT (Greenwich Mean Time) et la "
-"convertit en\n"
-"temps local selon le fuseau horaire choisi. Il est néanmoins possible de\n"
-"désactiver cela en désélectionnant « Horloge système réglée sur le méridien\n"
-"de Greenwich » de façon à ce que l'horloge matérielle soit la même que\n"
-"celle du système. Cela est particulièrement utile si la machine accueille\n"
-"un autre système d'exploitation tel que .\n"
-"\n"
-"La « Synchronisation automatique » permet de régler l'heure automatiquement\n"
-"en se connectant à un serveur de temps sur Internet. Dans la liste qui est\n"
-"alors présentée, choisissez un serveur géographiquement proche de vous.\n"
-"Vous devez avoir une connexion Internet pour que cela fonctionne bien\n"
-"entendu. Cela installera en fait sur votre machine un serveur de temps\n"
-"local qui pourra optionnellement être lui-même utilisé par d'autres\n"
-"machines de votre réseau local."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (pour le X Window system) est le coeur de votre interface graphique sous\n"
-"GNU/Linux. Tous les environnements graphiques (Gnome, KDE, Afterstep, ...) présents\n"
-"sur Mandrake Linux dépendent de X. A cette étape, DrakX, va tenter de le configurer\n"
-"automatiquement.\n"
-"\n"
-"Il est très rare que cette étape échoue, à moins d'avoir un équipement\n"
-"obsolète (ou trop récent). Si le processus réussit, il va démarrer X\n"
-"automatiquement avec la meilleure résolution d'écran possible, en fonction\n"
-"de la taille du moniteur. Une fenêtre apparaît alors vous demandant si\n"
-"cette configuration vous convient.\n"
-"\n"
-"Si vous faites une installation « Expert », vous entrerez dans\n"
-"l'information de configuration de X. Voir les sections correspondantes du\n"
-"manuel pour plus d'information.\n"
-"\n"
-"Si vous pouvez voir le message et cliquez sur oui, DrakX continuera à la\n"
-"prochaine étape. Si vous ne pouvez voir la fenêtre, ceci signifie que le\n"
-"test a échoué et vous serez ramené à l'écran précédant en 10 secondes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Il se peut que vous ne soyez pas entièrement satisfait à la première\n"
-"tentative de configuration graphique (écran trop petit, peu de\n"
-"couleurs...). Ainsi, même si X démarre correctement, DrakX vous demande si\n"
-"la configuration vous convient. Il proposera aussi de la changer en\n"
-"affichant une liste des modes valides, si possible.\n"
-"\n"
-"En dernier recours, si vous ne pouvez pas faire fonctionner X, choisissez\n"
-"« Changer la carte graphique », sélectionnez « carte non listée », et\n"
-"lorsqu'il vous sera demandé le serveur graphique, choisissez « FBDev ».\n"
-"c'est une option de secours qui fonctionnera sur n'importe quelle carte\n"
-"graphique moderne. Choisissez ensuite « Tester à nouveau » pour vous\n"
-"assurer que tout va bien."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalement, il vous sera demandé si vous souhaitez obtenir l'interface\n"
-"graphique dès le démarrage ou non. Notez que cette question sera posée même\n"
-"si vous choisissez de ne pas tester la configuration. Il est évidemment\n"
-"souhaitable de répondre « Non » si cette machine est un serveur sur\n"
-"laquelle personne n'est censée travailler en mode graphique."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Le CDROM d'installation de Mandrake Linux a un mode de récupération prédéfini. Vous pouvez\n"
-"y accéder en démarrant l'ordinateur sur le CDROM. Selon la version de votre\n"
-"« BIOS », il faut lui spécifier de démarrer sur le CDROM. Vous devriez\n"
-"revenir au disquette de démarrage dans deux cas précis :\n"
-"\n"
-" * Au moment d'installer le « Programme d'amorce », DrakX va réécrire sur le\n"
-"secteur (MBR) contenant le programme d'amorce (boot loader) afin de vous\n"
-"permettre de démarrer avec Linux ou Windows (en prenant pour acquis que\n"
-"vous avez deux systèmes d'exploitation installés. Si vous réinstallez\n"
-"Windows, celui-ci va réécrire sur le MBR et il vous sera désormais\n"
-"impossible de démarrer Linux.\n"
-"\n"
-" * Si un problème survient et qu'il vous est impossible de démarrer à partir\n"
-"du disque dur, cette disquette deviendra votre seul moyen de démarrer votre\n"
-"système Linux. Elle contient un bon nombre d'outils pour récupérer un\n"
-"système défectueux, peu importe la source du problème.\n"
-"\n"
-"En cliquant sur cette étape, on vous demandera d'insérer une disquette. La\n"
-"disquette insérée sera complètement effacée et DrakX se chargera de la\n"
-"formater et d'y insérer les fichiers nécessaires."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Cette étape vous permet de déterminer précisément l'emplacement de votre\n"
-"installation de Mandrake Linux. Si votre disque est vide ou utilisé par un autre système\n"
-"d'exploitation, vous devrez repartitionner votre disque. Partitionner un\n"
-"disque signifie de le diviser précisément afin de créer un espace pour\n"
-"votre installation.\n"
-"\n"
-"Comme les effets du partition sont irréversibles (l'ensemble du disque est\n"
-"effacé), le partitionnement est généralement intimidant et stressant pour\n"
-"un utilisateur inexpérimenté. Heureusement, une interface a été prévue à\n"
-"cet effet. Avant de commencer, révisez vos manuels et surtout, prenez votre\n"
-"temps.\n"
-"\n"
-"Si vous êtes en mode expert, l'application DiskDrake, l'outil de\n"
-"partitionnement de Mandrake Linux, vous permettra de déterminer précisément l'emplacement\n"
-"de chacune de vos partitions. À partir de l'interface d'installation, vous\n"
-"pouvez lancer les assistants en cliquant sur « Assistant ».\n"
-"\n"
-"Si des partitions ont déjà été définies, peu importe qu'elles proviennent\n"
-"d'une autre installation ou d'un autre outil de partitionnement, il vous\n"
-"suffit de simplement choisir sur quelle partition vous voulez installer\n"
-"Mandrake.\n"
-"\n"
-"Si vos partitions ne sont pas définies, vous devrez les créer en utilisant\n"
-"l'assistant. Selon la configuration de votre disque, plusieurs options sont\n"
-"disponibles :\n"
-"\n"
-" * « Utilisez l'espace disponible »: cette option tentera simplement de\n"
-"partitionner automatiquement l'espace inutilisé sur votre disque. Il n'y\n"
-"aura pas d'autre question.\n"
-"\n"
-" * « Utiliser les partitions existantes »: l' assistant a détecté une ou\n"
-"plusieurs partitions existants sur votre disque. Si vous voulez les\n"
-"utiliser, choisissez cette option.\n"
-"\n"
-" * « Utilisez l'espace libre sur une partition Windows »: si Microsoft Windows est installé\n"
-"sur votre disque et prend l'ensemble de l'espace vous devez créer une place\n"
-"pour votre installation Mandrake. Pour ce faire, vous pouvez tout effacer\n"
-"(voir « effacer tout le disque » ou « Mode expert ») ou vous pouvez\n"
-"redimensionner l'espace utilisé par GNU/Linux. Le redimensionnement peut être\n"
-"effectué sans pertes de données, à condition que vous ayez préalablement\n"
-"défragmenté la partition Windows. Une sauvegarde de Vos données ne fera pas de mal\n"
-"non plus. Cette seconde option peut être accomplie sans perte de données.\n"
-"Cette solution est recommandée pour faire cohabiter Linux et Windows sur le\n"
-"même ordinateur.\n"
-"\n"
-"   Avant de choisir cette option, il faut comprendre qu'après cette procédure\n"
-"l'espace disponible pour Windows sera réduit. Vous aurez moins d'espace\n"
-"pour installer des logiciels ou sauvegarder de l'information avec Windows.\n"
-"\n"
-" * « Effacer tout le disque »: si vous voulez effacer toutes les données et\n"
-"les applications installées sur votre système et les remplacer par votre\n"
-"nouveau système Mandrake Linux, choisissez cette option. Soyez prudent, car ce choix est\n"
-"irréversible et permanent. Il vous sera impossible de retrouver vos données\n"
-"effacées.\n"
-"\n"
-"   !! En choisissant cette option, l'ensemble du contenu de votre disque sera\n"
-"détruit. !!\n"
-"\n"
-" * « Supprimer Microsoft Windows »: ce choix effacera tout simplement ce que\n"
-"contient le disque et recommencera à zéro. Toutes les données et les\n"
-"programmes présents sur le disque seront effacés.\n"
-"\n"
-"   !! En choisissant cette option, l'ensemble de votre disque sera effacé. !!\n"
-"\n"
-" * « Mode expert »: permet de partitionner manuellement votre disque. Soyez\n"
-"prudent, parce que bien que plus puissante, cette option est dangereuse.\n"
-"Vous pouvez facilement perdre l'ensemble du contenu d'un disque. Donc, ne\n"
-"choisissez pas cette option si vous ne savez pas exactement ce que vous\n"
-"devez faire."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Votre installation de Mandrake Linux est maintenant terminée et votre système est prêt à\n"
-"être utilisé. Cliquez sur « OK » pour redémarrer votre système. Vous aurez\n"
-"alors le choix de démarrer ou Windows (s'il est présent).\n"
-"\n"
-"Le bouton « Avancée » (en mode Expert uniquement) permet deux autres\n"
-"options:\n"
-"\n"
-" * « Générer une disquette d'auto-install »: Pour créer une disquette\n"
-"d'installation qui permettra de reproduire l'installation que vous venez de\n"
-"réaliser sans l'aide d'un administrateur.\n"
-"\n"
-"   Notez que les deux options suivantes apparaissent après avoir cliqué sur le\n"
-"bouton:\n"
-"\n"
-"    * « Replay ». C'est une installation partiellement automatique où il est\n"
-"possible de personnaliser le partitionnement du disque (exclusivement).\n"
-"\n"
-"    * « Automatique ». Complètement automatique, cette installation reformate\n"
-"le disque au complet.\n"
-"\n"
-"   Cette fonctionnalité est particulièrement pratique pour l'installation de\n"
-"multiples systèmes. Voir la sectionAuto install de notre site Web.\n"
-"\n"
-" * « Sauvegarder les paquetages sélectionnés »(*) sauve la sélection des\n"
-"paquetages installés. Puis, lorsque vous ferez une autre installation,\n"
-"insérer la disquette dans le lecteur et accéder au menu d'aide en tapant\n"
-"[f1], et entrez la commande suivante: « linux defcfg=\"floppy\" ».\n"
-"\n"
-"(*) Vous avez besoin d'une disquette formatée avec FAT (pour la créer sous\n"
-"Linux, tapez « mformat a: »)"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Chaque partition nouvellement définie doit être formatée, c'est à dire\n"
-"qu'un système de fichier (filesystem) doit y être créé.\n"
-"\n"
-"Durant cette étape, vous pouvez également choisir de reformater d'autres\n"
-"partitions existantes afin d'effacer les données qu'elles contiennent. Si\n"
-"c'est ce que vous désirez, il faut également choisir ces partitions.\n"
-"\n"
-"Sachez qu'il n'est pas nécessaire de reformater toutes les partitions\n"
-"existantes. Vous devez reformater les partitions contenant le système\n"
-"d'exploitation, (tel que : « / », « /usr » ou « /var ») mais vous n'avez\n"
-"pas à reformater les partitions de données que vous voulez garder,\n"
-"habituellement « /home ».\n"
-"\n"
-"Restez prudent au moment de sélectionner les partitions. Une fois formatée,\n"
-"toutes les données contenues sur les partitions sélectionnées seront\n"
-"détruites et il sera impossible de les récupérer.\n"
-"\n"
-"Cliquez sur « OK » lorsque vous être prêt à formater vos partitions.\n"
-"\n"
-"Cliquez sur « Annuler » si vous voulez choisir d'autres partitions pour\n"
-"votre installation.\n"
-"\n"
-"Cliquez sur « Avancé », si vous désirez choisir les partitions qui seront\n"
-"vérifiées pour des secteurs corrompus."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Votre nouveau système Mandrake Linux est maintenant en cours d'installation. Selon le\n"
-"nombre de paquetages à installer et la puissance de votre ordinateur, cette\n"
-"opération peut prendre de quelques minutes à quelques heures."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Au moment où vous êtes en train d'installer Mandrake Linux, il est possible que certains\n"
-"paquetages aient été mis à jour depuis la sortie du produit. Des bogues ont\n"
-"pu être corrigés, et des problèmes de sécurité résolus. Pour vous permettre\n"
-"de bénéficier de ces mises à jour, il vous est maintenant proposé de les\n"
-"télé-charger sur Internet. Choisissez « Oui » si vous avez une connexion\n"
-"Internet, ou « Non » si vous préférez installer les mises à jour plus tard.\n"
-"\n"
-"En choisissant « Oui », la liste des sites depuis lesquels les mises à\n"
-"jours peuvent être télé-chargées est affichée. Choisissez le site le plus\n"
-"proche. Puis un arbre de choix des paquetages apparaît: vérifiez la\n"
-"sélection, puis cliquez sur « Installer » pour télé-charger et installer\n"
-"les mises à jour sélectionnées, ou « Annuler » pour abandonner."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Avant d'aller plus loin, il est fortement recommandé de lire attentivement\n"
-"les termes et conditions d'utilisations de la licence. Celle-ci régit\n"
-"l'ensemble de la distribution Mandrake Linux. Si, pour une raison ou une\n"
-"autre, vous n'acceptez pas ces conditions, cliquez sur « Refuser ».\n"
-"L'installation sera alors immédiatement interrompue. Pour continuer,\n"
-"cliquez sur « Accepter »."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"À cette étape, vous devrez déterminer le niveau de sécurité requis par\n"
-"votre système. Le niveau de sécurité requis se détermine en fonction de\n"
-"l'exposition du système à d'autres utilisateurs (s'il est connecté\n"
-"directement sur Internet par exemple) et selon le niveau de sensibilité de\n"
-"l'information contenu dans le système (des numéros de carte de crédit par\n"
-"exemple). Sachez que, de manière générale, plus la sécurité d'un système\n"
-"est élevée, plus il est complexe à opérer. Référez-vous au chapitre\n"
-"« msec » du « Manuel de référence » pour obtenir plus d'informations sur\n"
-"les niveaux de sécurité.\n"
-"\n"
-"Si vous ne savez pas quel niveau choisir, gardez la sélection par défaut."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"A cette étape, vous devez choisir quelles partitions seront utilisées pour\n"
-"l'installation de votre système Mandrake Linux. Si des partitions ont déjà\n"
-"été définies, soit par une installation précédente de GNU/Linux soit grace\n"
-"à un autre outil de partitionnement, vous pouvez les utiliser.\n"
-"Sinon, de nouvelles partitions doivent être définies.\n"
-"\n"
-"Pour ce faire, vous devez d'abord sélectionner un disque dur. Vous pouvez\n"
-"ainsi cliquer sur « hda » pour choisir le premier disque IDE (primary "
-"master),\n"
-"« hdb » pour le deuxième disque IDE (primary slave), « sda » pour le \n"
-"premier disque SCSI, « sdb » pour le second, etc.\n"
-"\n"
-"Pour partitionner le disque sélectionné, vous pouvez utiliser ces options :\n"
-"\n"
-"- « Supprimer toutes les partitions » : efface toutes les partitions du\n"
-"disque choisi. \n"
-"\n"
-"- « Partitionnement automatique » : crée automatiquement les partitions\n"
-"Ext2 et Swap dans l'espace libre du disque. \n"
-"\n"
-"- « Davantage » : donne accès à des fonctionnalités supplémentaires. \n"
-"\n"
-"- « Sauvegarder la table des partitions... » : sauve la table des "
-"partitions\n"
-" sur une disquette, ce qui est fortement recommandé. Cela peut être\n"
-"très utile pour la restaurer si elle est endommagée. \n"
-"\n"
-"- « Charger une table des partitions... » : permet de restaurer une table\n"
-"des partitions à partir d'une disquette.\n"
-"\n"
-"- « Deviner automatiquement la table des partitions » : si votre table des\n"
-"partitions est endommagée, vous pouvez essayer de la récuperer \n"
-"automatiquement grace à cette option. Soyez prudent et rappelez-vous\n"
-"que cela peut échouer.\n"
-"\n"
-"- « Relire la table des partitions » : annule tous les changements et \n"
-"recharge votre table des partitions initiale.\n"
-"\n"
-"- « Auto-montage des périphériques amovibles » : désélectionner cette\n"
-"option obligera les utilisateurs à monter et démonter manuellement les\n"
-"périphériques amovibles tels que les disquettes ou cédéroms.\n"
-"\n"
-"- « Assistant » : à utiliser si vous n'avez pas une bonne connaissance\n"
-"du partitionnement.\n"
-"\n"
-"- « État précédent » : pour annuler vos dernières modifications.\n"
-"\n"
-"- « Passer en mode expert » : permet des actions supplémentaires\n"
-"(Type de partition, options, formatage), et donne plus d'informations.\n"
-"\n"
-"- « Terminer » : enregistre physiquement vos changements sur le disque.\n"
-"\n"
-"Note : vous pouvez atteindre les options grace au clavier, en utilisant la\n"
-"touche <Tab> et les flèches haut/bas.\n"
-"Quand une partition est sélectionnée, vous pouvez utiliser :\n"
-"- <Ctrl-C> pour créer une nouvelle partition lorsque une partition vide\n"
-"est sélectionnée. \n"
-"- <Ctrl-D> pour effacer une partition. \n"
-"- <Ctrl-M> pour attribuer un point de montage à la partition.\n"
-"\n"
-"Pour obtenir des informations sur les différents systèmes de fichiers\n"
-"disponibles, vous pouvez lire le chapitre ext2fs du Manuel de Référence.\n"
-"\n"
-"S vous installez une machine à base de PowerPC (Mac), vous devrez\n"
-"créer une petite partition d'amorçage (bootstrap) de type HFS d'au moins\n"
-"1 Mo, qui sera utilisé par le programme d'amorçage « yaboot ». Si vous \n"
-"optez pour une partition un peu plus grande, disons 50 Mo, vous pouvez\n"
-"l'utiliser pour stocker un noyau additionnel et des images ramdisk pour\n"
-" des situations de démarrage de secours."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Plus d'une partition DOS/Windows ont été détectées sur votre disque dur.\n"
-"Veuillez choisir celle que vous désirez redimensionner pour installer votre\n"
-"nouveau système d'exploitation Mandrake Linux.\n"
-"\n"
-"Pour information, chaque partition est décrite comme suit :\n"
-"« Nom Linux », « Nom Windows », « Capacité ».\n"
-"\n"
-"Le champ « Nom linux  » est codé comme suit : « type du disque dur »,\n"
-"« numéro du disque dur », « numéro de la partition » (par exemple,\n"
-"« hda1 »).\n"
-"\n"
-"Le champ « type du disque dur » est « hd » si votre disque dur\n"
-"est un disque dur IDE ou « sd » s'il s'agit d'un disque SCSI.\n"
-"\n"
-"Avec un disque dur IDE,\n"
-"   * « a » signifie « disque maître sur le premier port IDE »,\n"
-"   * « b » signifie « disque esclave sur le premier port IDE »,\n"
-"   * « c » signifie « disque maître sur le second port IDE »,\n"
-"   * « d » signifie « disque esclave sur le second port IDE ».\n"
-"\n"
-"Avec un disque dur SCSI, un « a » signifie « premier disque dur »,\n"
-"« b » signifie « second disque dur », etc. dans l'ordre des IDs SCSI»\n"
-"\n"
-"Le champ « Nom Windows » correspond à la lettre identifiant votre disque\n"
-"dur sous DOS/Windows (le premier disque (ou la première partition)\n"
-"est appelé « C: »)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Veuillez patienter. Cette opération peut prendre plusieurs minutes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX doit maintenant savoir quel type d'installation vous désirez\n"
-"réaliser. Deux types d'installations sont proposés: Par défaut (« \n"
-"Recommandée »), qui limite le nombre de questions à l'utilisateur au\n"
-"minimum ou « Expert » qui vous permet de sélectionner individuellement\n"
-"chacune des composantes à installer. Également, on vous propose de faire\n"
-"une « Installation » ou une « Mise à jour » d'un système existant:\n"
-"\n"
-" * « Installation »: balaye l'ancien système. En fait, selon ce que votre\n"
-"machine comporte, vous pourrez garder intacte certaines des anciennes\n"
-"partition (Linux ou autres);\n"
-"\n"
-" * « Mise à jour »: cette classe d'installation permet de simplement mettre\n"
-"à jours les paquetages qui composent votre système GNU/Linux. Elle conserve les\n"
-"partitions existantes, ainsi que la configuration des utilisateurs. Toutes\n"
-"les autres étapes de l'installation sont accessibles en comparaison avec\n"
-"une installation classique;\n"
-"\n"
-" * « Mise à jour des paquetages uniquement »: Cette nouvelle classe\n"
-"d'installation permet de mettre à jour un système Mandrake Linux existant, tout en gardant\n"
-"sa configuration inchangée. L'ajout de nouveaux paquetages durant la mise à\n"
-"jour est cependant possible.\n"
-"\n"
-"La mise à jour devrait fonctionner correctement pour les systèmes Mandrake Linux à partir\n"
-"de la version « 8.1 ».\n"
-"\n"
-"Selon votre niveau d'expertise avec les systèmes d'exploitations GNU/Linux, il faut\n"
-"choisir l'un des deux types d'installations suivants:\n"
-"\n"
-" * « Recommandée »: choisissez cette option si vous n'avez jamais installé\n"
-"de système d'exploitation GNU/Linux. C'est la méthode la plus facile, la plupart des\n"
-"choix ont déjà été fait pour vous.\n"
-"\n"
-" * Expert: si vous avez une bonne connaissance de GNU/Linux, vous pouvez choisir ce\n"
-"type d'installation. Cette méthode vous permettra de personnaliser\n"
-"l'ensemble des composantes de votre système. Ces questions peuvent s'avérer\n"
-"complexes, particulièrement en matière de partitionnement et du choix des\n"
-"paquetages installés. En conséquence, il n'est pas recommandé de s'y\n"
-"aventurer sans de bonnes connaissances au préalable."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalement, DrakX sélectionne le clavier approprié en fonction de la\n"
-"langue choisie et vous ne devriez pas voir cette étape. Cela dit, il est\n"
-"possible que vous ayez un clavier ne correspondant pas exactement à votre\n"
-"langue d'utilisation. Par exemple, si vous habitez le Québec et parlez le\n"
-"français et l'anglais, vous pouvez vouloir avoir votre clavier anglais pour\n"
-"les tâches d'administration système et votre clavier français pour écrire\n"
-"de la poésie. Dans ces cas, il vous faudra revenir à cette étape\n"
-"d'installation et sélectionner un autre clavier à partir de la liste.\n"
-"\n"
-"Vous n'avez qu'a choisir la disposition de clavier qui vous convient.\n"
-"\n"
-"Cliquez sur « Davantage » pour voir toutes les options proposées."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Veuillez choisir votre langue de communication. Celle-ci sera utilisée\n"
-"durant le processus d'installation, ainsi que durant les mises à jour de\n"
-"votre système.\n"
-"\n"
-"En cliquant sur « Avancé », le programme vous proposera également d'autres\n"
-"langues pouvant être installées sur votre station de travail. En\n"
-"choisissant d'autres langues, le programme vous installera toute la\n"
-"documentation et les applications nécessaires à l'utilisation de cette\n"
-"autre langue. Par exemple, si vous prévoyez d'accueillir des utilisateurs\n"
-"d'Espagne sur votre serveur, choisissez l'anglais comme langue principale,\n"
-"et, dans la section avancée, cliquez sur l'étoile grise correspondant à\n"
-"Spanish|Spain.\n"
-"\n"
-"Sachez que plusieurs langues peuvent être installées. Une fois votre\n"
-"sélection complète terminée, cliquez sur « OK » pour continuer."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX détecte généralement le nombre de boutons de votre souris. Sinon, il\n"
-"prend pour acquis que vous avez une souris à deux boutons et configurera\n"
-"l'émulation du troisième bouton. Également, DrakX saura automatiquement si\n"
-"vous avez une souris PS/2, série ou USB.\n"
-"\n"
-"Si vous désirez installer une souris différente, veuillez la sélectionner à\n"
-"partir de la liste qui vous est proposée.\n"
-"\n"
-"Si vous sélectionnez une souris différente de celle choisie par défaut,\n"
-"DrakX vous présentera un écran de test. Utilisez les boutons et la roue\n"
-"pour vous assurer que tout fonctionne correctement. Si votre souris ne\n"
-"fonctionne pas normalement, appuyer sur la barre d'espacement ou [Entrée]\n"
-"ou encore « Annuler », puis, sélectionner une autre souris."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Veuillez sélectionner le bon port. Par exemple, le port « COM1 » de Windows\n"
-" est appelé « ttyS0 » sous GNU-Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Vous avez à prendre ici une décision cruciale pour la sécurité de votre\n"
-"système. L'utilisateur « root » est l'administrateur du système qui a tous\n"
-"les droits d'accès aux fichiers de configuration, etc. Il est donc\n"
-"impératif de choisir un mot de passe difficile à deviner (pensez aux\n"
-"systèmes prévus à cet effet qui anticipent les combinaisons communes des\n"
-"utilisateurs). DrakX vous avertira si le mot de passe entré est trop facile\n"
-"à deviner. Comme vous pouvez le voir, il est également possible de ne pas\n"
-"entrer de mot de passe. Nous déconseillons fortement cette pratique. Comme\n"
-"l'erreur est humaine, un utilisateur avec tous les droits peut tout\n"
-"détruire sur votre système, c'est pourquoi le mot de passe doit agir comme\n"
-"barrière à l'entrée.\n"
-"\n"
-"Le mot de passe choisi devrait contenir au moins 8 caractères\n"
-"alphanumériques. Ne jamais écrire un mot de passe, forcez-vous à vous en\n"
-"souvenir par coeur. Il faut donc ménager accessibilité et mémoire, donc un\n"
-"mot de passe de 30 caractères est presque impossible à mémoriser.\n"
-"\n"
-"Afin d'éviter les regards indiscrets, le mot de passe n'apparaîtra pas à\n"
-"l'écran. Il vous faudra donc l'inscrire deux fois afin d'éviter les erreurs\n"
-"de frappe. Évidemment, si vous faites deux fois la même erreur, celle-ci\n"
-"sera sauvegardée et vous devrez la reproduire afin d'accéder à votre\n"
-"système pour la première fois.\n"
-"\n"
-"En mode expert, on vous demandera si vous comptez vous connecter sur un\n"
-"serveur d'authentification, tel que NIS ou LDAP. Si votre réseau utilise un\n"
-"de ces protocoles, il faut le sélectionner. Si vous n'en avez aucune idée,\n"
-"demandez à votre administrateur de réseau.\n"
-"\n"
-"Si votre ordinateur n'est pas connecté sur un réseau administré, vous devez\n"
-"choisir « Fichiers Locaux » pour l'authentification."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO et grub sont deux programmes d'amorce pour GNU/Linux. Cette étape est normalement\n"
-"complètement automatique. En fait, DrakX analyse le secteur de démarrage\n"
-"(master boot record) et agit en fonction de ce qu'il peut y lire:\n"
-"\n"
-" * Si un secteur de démarrage Windows est détecté, il va être remplacer par\n"
-"LILO/GRUB. Donc, vous serez capable de démarrer et tout autre système\n"
-"d'exploitation.\n"
-"\n"
-" * si GRUB ou LILO est détecté, il sera remplacé par la nouvelle version;\n"
-"\n"
-"En cas de doute, DrakX affiche différentes options.\n"
-"\n"
-" * « Programme d'amorçage à utiliser » vous propose trois choix:\n"
-"\n"
-"    * « GRUB »: si vous préférer GRUB (menu texte).\n"
-"\n"
-"    * « LILO en mode graphique »: si vous préférez l'interface graphique.\n"
-"\n"
-"    * « LILO en mode texte »: si vous préférez la version texte de LILO.\n"
-"\n"
-" * « Périphériques de démarrage »: dans la plupart des cas, vous n'aurez pas\n"
-"à changer le disque par défaut (« /dev/hda », mais si vous le désirez, le\n"
-"programme d'amorce peut être installé sur un second disque, « /dev/hdb »,\n"
-"ou même sur une disquette, « /dev/fd0 ».\n"
-"\n"
-" * « Délais avant l'activation du choix par défaut »: au redémarrage de\n"
-"l'ordinateur, il s'agit du temps accordé à l'utilisateur pour démarrer un\n"
-"autre système d'exploitation.\n"
-"\n"
-"!! Prenez garde, si vous décidez de ne pas installer de programme d'amorce\n"
-"(en cliquant sur « Annuler »), vous devez vous assurez d'avoir une méthode\n"
-"pour démarrer le système. Aussi, assurez vous de bien savoir ce que vous\n"
-"faites si vous modifiez les options. !!\n"
-"\n"
-"En cliquant sur « Avancée », vous aurez accès à plusieurs autres options de\n"
-"configuration. Sachez que celles-ci sont réservées aux experts en la\n"
-"matière.\n"
-"\n"
-"Si vous avez d'autres systèmes d'exploitation installés sur votre\n"
-"ordinateur, ils seront automatiquement détectés et ajout à vos menus de\n"
-"démarrage. À cette étape, vous pouvez décider de préciser ces options. En\n"
-"double-cliquant sur une entrée existante vous pourrez la paramétrer à votre\n"
-"guise, ou l'enlever. « Ajouter » permet de créer de nouvelles entrées, et\n"
-"« terminer » vous conduit à la prochaine étape d'installation."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) et grub sont des programme d'amorcage: ils sont\n"
-"capables de démarrer GNU/Linux ou n'importe quel autre système\n"
-"d'exploitation présent sur votre machine.  Normalement, ces autres\n"
-"systèmes sont censés être correctement détectés et installés. Si ce\n"
-"n'est pas le cas, vous pouvez ajouter manuellement une nouvelle entrée \n"
-"via cet écran. Veillez à choisir les paramètres corrects.\n"
-"\n"
-"Vous pouvez également supprimer l'accès à ces autres systèmes en\n"
-"détruisant les entrées correspondantes. Mais vous aurez alors besoin\n"
-"d'une disquette de démarrage afin de lancer ces autres systèmes!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vous devez maintenant choisir où placer le programme d'amorçage, LILO ou "
-"Grub,\n"
-"nécessaire au démarrage de GNU/Linux.\n"
-"\n"
-"À moins de savoir exactement ce que vous faites, choisissez\n"
-"toujours « Premier secteur du disque (MBR) »."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Il s'agit ici de choisir un gestionnaire d'impression pour votre "
-"ordinateur.\n"
-"Les autres systèmes peuvent n'en proposer qu'un, Mandrake vous en offre "
-"trois :\n"
-"\n"
-"« PDQ » (Print Don't Queue), vous suffira si votre imprimante est\n"
-"reliée directement à votre ordinateur, et que vous ne voulez pas faire\n"
-"d'impression en réseau. C'est une solution fiable, sûre, et simple pour un\n"
-"débutant à GNU/Linux. PDQ peut quand même gérer certains cas simples\n"
-"d'imprimantes en réseau. Vous pourrez de toute façon modifier votre choix\n"
-"après installation en lançant PrinterDrake en mode expert.\n"
-"\n"
-"« CUPS » (Common Unix Printing System) est excellent à la fois pour\n"
-"l'impression locale et l'impression réseau. Il est simple d'utilisation et "
-"peut\n"
-"agir aussi bien comme serveur que comme client pour l'ancien système\n"
-"d'impression LPD. Il est donc rétro-compatible. Il peut faire beaucoup de\n"
-"choses, mais la configuration minimale est aussi simple que pour PDQ,\n"
-"et il possède une interface graphique pour l'impression et ses options.\n"
-"Si vous avez besoin d'émuler un serveur LPD, vous devez activer le\n"
-"service « cups-lpd ».\n"
-"\n"
-"« LPRng » (Line Printer New Generation) fait approximativement\n"
-"la même chose que les deux autres, mais il peut en plus imprimer\n"
-"à travers un réseau Novell Network car il supporte le protocole IPX,\n"
-"et il peut également diriger une impression vers une commande shell.\n"
-"Si vous n'avez pas besoin de ces deux fonctionnalités, CUPS est\n"
-"préférable car plus simple, et plus performant pour les réseaux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX détecte maintenant tous les périphériques IDE présents sur votre\n"
-"système. Également, DrakX recherchera les périphériques SCSI. Finalement,\n"
-"selon les composantes détectées, DrakX installera tous les pilotes\n"
-"nécessaires à son fonctionnement.\n"
-"\n"
-"Compte tenu de la vaste gamme de périphériques disponibles sur le marché,\n"
-"dans certain cas la détection de matériel ne fonctionnera pas. Dans ce cas,\n"
-"DrakX vous demandera de confirmer si des composantes SCSI sont présentes\n"
-"sur votre système. Cliquez sur « Oui » si vous êtes certain d'avoir un\n"
-"périphérique SCSI sur votre système. DrakX vous présentera alors une liste\n"
-"de carte SCSI disponibles. Sélectionnez la vôtre. Évidement, cliquez sur\n"
-"« Non », si vous n'en avez pas. Si vous n'êtes pas certain, cliquez sur\n"
-"« Voir les informations sur le matériel », puis sur « OK ». Vérifiez la\n"
-"liste du matériel, puis cliquez sur « OK » pour retourner à la question\n"
-"concernant les périphériques SCSI.\n"
-"\n"
-"Si vous devez spécifier votre carte SCSI manuellement, DrakX vous demandera\n"
-"de confirmer les options du périphérique. Vous devriez permettre à DrakX de\n"
-"vérifier automatiquement votre carte pour les options nécessaires à\n"
-"déterminer.\n"
-"\n"
-"Il peut arriver que DrakX soit incapable de vérifier les options\n"
-"nécessaires. Dans ce cas, vous devrez les déterminer manuellement.\n"
-"Consultez le guide d'utilisation (Chapitre 3, section \"Obtenir des\n"
-"informations sur votre matériel\") pour quelques astuces pour retrouver les\n"
-"paramètres nécessaires dans la documentation de vos périphériques, sur le\n"
-"site du fabricant (si vous avez un accès à Internet) ou à partir des menus\n"
-"de Microsoft Windows (si vous utilisiez ce périphérique avec Windows)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Vous pouvez ajouter des entrées supplémentaires dans « yaboot », soit\n"
-"pour démarrer un autre système d'exploitation, soit pour des noyaux de\n"
-"secours.\n"
-"\n"
-"Pour les autres systèmes, l'entrée consiste en un label et la partition "
-"racine.\n"
-"\n"
-"Pour Linux, voici les options possibles :\n"
-"\n"
-"- label : le nom que vous devrez taper au message d'invite de yaboot pour\n"
-"activer cette option d'amorçage. \n"
-"\n"
-"- racine : le périphérique racine ou « / » pour votre installation Linux. \n"
-"\n"
-"- options passées au noyau : sur les matériels Apple, des options sont\n"
-" souvent transmises au noyau pour l'initialisation de la carte graphique,\n"
-"ou pour activer l'émulation (au clavier) des deux boutons qui manquent\n"
-"souvent aux souris d'Apple. Voici quelques exemples : \n"
-"\n"
-"        video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"- Fichier RamDisk : cette option peut être utilisée pour charger des\n"
-"modules avant que le périphérique d'amorçage ne soit disponible, ou\n"
-"pour charger une image ramdisk pour un démarrage de secours.\n"
-"\n"
-"- Taille du RamDisk : la taille par défaut est généralement de 4096 octets.\n"
-"Si vous voulez une taille plus grande, utilisez cette option.\n"
-"- Préactivé en écriture : normalement, la partition racine est initialement\n"
-"montée en mode lecture seulement, pour vérifier le système de fichier\n"
-"avant qu'il ne soit activé. Avec cette option, vous pouvez autoriser la\n"
-"partition racine à être montée directement en mode écriture.\n"
-"\n"
-"- NoVideo : si la carte graphique devait poser trop de problèmes, vous \n"
-"pouvez activer cette option pour démarrer en mode « framebuffer » natif.\n"
-"\n"
-"- Defaut : sélectionne cette entrée comme choix par défaut, activé en \n"
-"pressant juste <ENTREE> au message d'invite de « yaboot ». C'est cette\n"
-"entrée qui sera alors précédée d'un « * », si vous pressez <Tab> pour voir\n"
-"la liste des possibilités."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"« Yaboot »  est un programme d'amorçage pour les MacIntosh dotés de\n"
-"l'architecture NewWorld (iMac, G3, G4, PowerBook G3 Series 99, iBook, etc.)\n"
-"Il est capable de faire démarrer GNU/Linux, MacOS, ou MacOSX, si\n"
-"ces systèmes sont présents sur votre ordinateur. Normalement, les\n"
-"systèmes d'exploitation déjà présents devraient avoir été détectés.\n"
-"Si ce n'est pas le cas, vous pouvez ajouter manuellement l'entrée manquante\n"
-"sur cet écran. Veuillez faire attention de choisir les bons paramètres.\n"
-"\n"
-"Les principales options de Yaboot sont :\n"
-"\n"
-"- Message de démarrage : un simple texte, affiché avant l'amorçage.\n"
-"\n"
-"- Périphérique d'amorçage : indique où vous souhaitez installer le\n"
-"programme d'amorçage. Généralement, vous aurez configuré auparavant\n"
-"une partition d'amorçage (bootstrap) pour contenir ces informations.\n"
-"\n"
-"- Délai de l'OpenFirmware : à la différence de LILO, il y a deux\n"
-"délais disponibles avec Yaboot. Pendant le premier (mesuré en secondes),\n"
-"vous pouvez choisir entre CD, OF, MacOS, et Linux.\n"
-"\n"
-"- Délai d'amorçage du noyau : ce délai est similaire à celui de\n"
-"LILO. Après avoir sélectionné Linux, vous aurez ce délai (en dixièmes\n"
-"de seconde) avant d'accepter les paramètres noyau par défaut.\n"
-"\n"
-"- Autoriser l'amorçage sur CD ? : si vous activez cette option, vous\n"
-"pourrez choisir 'C', pour le CD, à la première invite d'amorçage.\n"
-"\n"
-"- Autoriser l'amorçage sur l'OF ? : si vous activez cette option, vous\n"
-"pourrez choisir 'N' pour l'OpenFirmware à la première invite d'amorçage.\n"
-"\n"
-"- choix par défaut : vous pouvez sélectionner quel système démarrera par\n"
-"défaut après expiration du délai de l'Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"On vous présente ici les différents paramètres de votre système. Selon le\n"
-"matériel installé, certaines entrées seront présentes et d'autres pas.\n"
-"\n"
-" * « Souris »: pour vérifier la configuration actuelle de la souris. "
-"Cliquez\n"
-"sur le bouton pour modifier les options.\n"
-"\n"
-" * « Clavier »: vérifie la configuration choisie pour le clavier. Cliquez\n"
-"sur le bouton pour la modifier.\n"
-"\n"
-" * « Fuseau horaire »: DrakX, par défaut, essaie de trouver le fuseau\n"
-"horaire dans lequel vous êtes. Encore une fois, il est possible que vous ne\n"
-"soyez pas dans le fuseau horaire qui vous convient. Donc, vous aurez\n"
-"peut-être à cliquer sur le bouton « fuseau horaire » pour identifier\n"
-"précisément l'heure qui doit apparaître dans vos horloges.\n"
-"\n"
-" * « Imprimante »: en cliquant sur « Pas d'imprimante », l'outil de\n"
-"configuration sera démarré.\n"
-"\n"
-" * « Carte son »: si une carte son a été détectée, elle apparaîtra ici.\n"
-"Aucune modification n'est possible à cette étape.\n"
-"\n"
-" * « Carte TV »: si une carte d'entrée/sortie vidéo (carte TV) a été\n"
-"détectée, elle apparaîtra ici. Aucune modification possible à cette étape.\n"
-"\n"
-" * « Carte ISDN »: si une carte ISDN est détectée, elle apparaîtra ici. "
-"Vous\n"
-"pouvez cliquer sur le bouton pour en modifier les paramètres."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Choisissez le disque dur que vous souhaitez effacer pour installer votre\n"
-"nouvelle partition Mandrake Linux. Soyez prudent, toutes les données\n"
-"présentes sur ce disque seront perdues et ne seront pas récupérables !"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliquez sur « OK » seulement si vous désirez supprimer toutes les données\n"
-"et partitions présentes sur ce disque dur. Soyez prudent. Après avoir "
-"cliqué\n"
-"sur « OK », vous n'aurez aucun moyen de récupérer ces données et\n"
-"partitions, y compris celles de Windows."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Impossible d'accéder aux modules correspondant à votre noyau (le fichier %s "
-"est manquant), cela veut généralement dire que votre disquette de boot est "
-"désynchronisée par rapport à votre medium d'Installation (veuillez créer une "
-"disquette de boot plus récente)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Vous devez aussi formater %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vous avez sélectionné le(s) serveur(s) suivant(s) : %s\n"
-"\n"
-"\n"
-"Ces serveurs seront activés par défaut. Ils n'ont pas de trou\n"
-"de sécurité connu, mais de nouveaux problèmes peuvent être\n"
-"découverts par la suite. Dans ce cas, vous devrez vous assurer\n"
-"de mettre à jour vos serveurs le plus rapidement possible.\n"
-"\n"
-"\n"
-"Confirmez vous l'installation de ces serveurs ?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "On ne peut pas utiliser l'option broadcast sans domaine NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insérez une disquette formatée en FAT (format DOS/Windows) %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Cette disquette n'est pas au format DOS/Windows"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pour utiliser cette sauvegarde de sélection des paquetages, veuillez "
-"redémarrer l'installation avec la commande « linux defcfg=floppy »."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erreur lors de la lecture du fichier %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Certains périphériques présents sur votre système nécessitent des pilotes\n"
-"« propriétaires » pour pouvoir fonctionner. Vous pouvez trouver plus\n"
-"d'informations les concernant ici : %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vous devez avoir une partition racine.\n"
-"Pour la définir, créez une partition (ou choisissez-en une déjà\n"
-"existante) puis cliquez sur « Point de montage » et choisissez « / »."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Vous devez créer une partition d'échange (swap)"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vous n'avez pas de partition d'échange (swap).\n"
-"\n"
-"Désirez-vous tout de même continuer ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vous devez disposer d'une partition FAT montée en /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Utiliser l'espace libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Pas assez d'espace libre pour créer de nouvelles partitions"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Utiliser une partition existante"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Pas de partition existante à utiliser"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Utiliser la partition Windows pour le loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quelle partition désirez-vous utiliser pour Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Choix des tailles"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Taille de la partition racine en Mo : "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Taille de la partition d'échange (swap) en Mo : "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Utiliser l'espace libre sur la partition de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Quelle partition désirez-vous redimensionner ?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calcul des limites du système de fichiers de Windows en cours"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Le programme de redimensionnement des partitions FAT ne peut gérer votre\n"
-"partition. L'erreur suivante est survenue : %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Votre partition FAT est trop fragmentée. Redémarrez sous Windows\n"
-"et lancez le programme de défragmentation « defrag »,\n"
-"puis relancez l'installation de Mandrake Linux."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATTENTION !\n"
-"\n"
-"La taille de votre partition Windows va maintenant être réduite.\n"
-"\n"
-"Soyez prudent : cette opération est dangereuse. Si ce n'est pas déjà\n"
-"fait, vous devriez tout d'abord sauvegarder vos données et lancer les\n"
-"programmes « scandisk » et « defrag » (fournis avec Windows)\n"
-"sur cette partition.\n"
-"\n"
-"Si vous êtes sûr de vous, cliquez sur OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quelle taille désirez-vous allouer à Windows ?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Le redimensionnement de la partition FAT a échoué: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Il n'y a aucune partition FAT à redimensionner ou à utiliser en tant que "
-"loopback (ou trop peu d'espace est disponible)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Effacer tout le disque"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Supprimer Microsoft Windows"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Vous possédez plus d'un disque dur.\n"
-"Sur lequel désirez vous installer Linux ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TOUTES les partitions et les données présentes sur le disque %s seront "
-"perdues"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partitionnement personnalisé"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Utiliser fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Vous pouvez maintenant partitionner %s.\n"
-"\n"
-"Lorsque vous aurez terminé, n'oubliez pas d'enregistrer vos\n"
-"modifications en appuyant sur la touche « w »."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Utiliser l'espace libre sur la partition de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Pas de place disponible pour l'installation"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'assistant de partitionnement de DrakX\n"
-"a trouvé les solutions suivantes :"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Le partitionnement a échoué : %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Démarrage de l'interface réseau"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Arrêt de l'interface réseau"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Une erreur est survenue et semble difficile à résoudre correctement.\n"
-"Vous pouvez continuer, mais à vos risques et périls."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Point de montage en double : %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Quelques paquetages importants n'ont pas été correctement installés. Il se\n"
-"peut que le lecteur de cédérom ou le cédérom lui-même soit défectueux. Vous\n"
-"pouvez vous assurer du bon état de ce dernier en exécutant la commande "
-"suivante\n"
-"sur un ordinateur fonctionnant correctement : « rmp -qpl Mandrake/RPMS/*."
-"rpm »\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenue sur %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Aucun lecteur de disquette disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Démarrage de l'étape « %s »\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Votre ordinateur possède peu de mémoire. Vous aurez peut-être quelques\n"
-"problèmes pour installer Mandrake Linux. Si cela se produit, vous pouvez\n"
-"essayer de procéder à une installation en mode texte. Pour cela, appuyez\n"
-"sur la touche « F1 » après l'amorçage sur cédérom puis entrez « text »."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe d'installation"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Veuillez choisir une des classes d'installation ci-dessous :"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La taille totale pour les groupes sélectionnés est approximativement de %d "
-"Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si vous voulez réduire la taille de votre installation,\n"
-"choisissez le pourcentage de paquetages que vous souhaitez installer.\n"
-"\n"
-"Un faible pourcentage ne conservera que les paquetages les plus importants.\n"
-"Un pourcentage de 100%% installera tous les paquetages sélectionnés."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Vous n'avez d'espace sur votre disque que pour %d%% de ces paquetages.\n"
-"\n"
-"Si vous souhaitez réduire encore la taille de l'installation,\n"
-"choisissez un pourcentage encore plus faible.\n"
-"\n"
-"Un faible pourcentage ne conserve que les paquetages les plus importants.\n"
-"Un pourcentage de %d%% installera le maximum possible de packages."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Vous pourrez affiner la sélection des paquetages lors de la prochaine étape."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Pourcentage de paquetages à installer"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Sélection des groupes de paquetages"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Sélection individuelle des paquetages"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Taille totale : %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Mauvais paquetage"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nom : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Taille : %d Ko\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importance : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Il n'y a pas assez de place pour installer ce paquetage"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Les paquetages suivants vont être installés"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Les paquetages suivants vont être désinstallés"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Vous ne pouvez pas sélectionner/désélectionner ce paquetage"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ce paquetage est nécessaire, vous ne pouvez pas l'enlever."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vous ne pouvez pas désélectionner ce paquetage. Il est déjà installé."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ce paquetage doit être mis à jour.\n"
-"Êtes-vous certain de vouloir le désélectionner ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Vous ne pouvez pas désélectionner ce paquetage, il doit être mis à jour."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Montrer les paquetages sélectionnés automatiquement"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Charger/Sauver sur disquette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Mise-à-jour de la sélection des paquetages"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Installation minimale"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Choisissez les paquetages que vous voulez installer"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimation en cours"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Veuillez patienter, préparation de l'installation..."
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetages"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation du paquetage %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepter"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Refuser"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"--Changement de cédérom--\n"
-"\n"
-"Veuillez insérer le cédérom nommé « %s »,\n"
-"puis cliquez sur « OK ».\n"
-"\n"
-"Si vous ne le possédez pas, cliquez sur « Annuler »."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Souhaitez-vous tout de même continuer ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Erreur lors du tri des paquetages :"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Erreur lors de l'installation du paquetage :"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Important\n"
-"\n"
-"Veuillez lire attentivement le présent document. En cas de désaccord \n"
-"avec l'un de ses termes vous n'êtes pas autorisé à installer les cédéroms\n"
-"suivants. Dans ce cas, Cliquez sur « Refuser » pour continuer \n"
-"l'installation sans ces médias.\n"
-"\n"
-"Certains composants logiciels contenus dans les prochains cédéroms \n"
-"ne sont pas soumis aux licences GPL ou similaires permettant la copie, \n"
-"la modification ou la redistribution. Chacun de ces composants logiciels \n"
-"est distribué sous les termes et conditions d'un accord de licence qui \n"
-"lui est propre. Veuillez vous y référer et vous y soumettre avant de les \n"
-"installer ou de les redistribuer. Généralement, ces licences n'autorisent\n"
-"pas la copie (autre qu'à titre de sauvegarde), la redistribution, \n"
-"la décompilation, la désassemblage, l'ingénierie inverse ni la modification "
-"des\n"
-"Logiciels auxquels elles s'appliquent. Toute violation d'un des termes de la "
-"licence applicable entraîne généralement sa\n"
-"résiliation, sans préjudice de tous autres droits ou actions à votre "
-"encontre.\n"
-"À moins que l'accord de licence ne vous l'y autorise, vous ne pouvez pas \n"
-"installer ces Logiciels sur plus d'une machine ni adapter les Logiciels \n"
-"pour une utilisation en réseau. Le cas échéant, veuillez contacter le \n"
-"distributeur du programme pour acquérir des licences additionnelles.\n"
-"La distribution à des tiers de copies des Logiciels ou de la documentation\n"
-"qui les accompagne est généralement interdite.\n"
-"\n"
-"Tous les droits, titres et intérêt de ces Logiciels sont la propriété \n"
-"exclusive de leurs auteurs respectifs et sont protégés au titre des \n"
-"droits de propriété intellectuelle et de copyright applicables aux "
-"logiciels.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Une erreur est survenue"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Désirez-vous vraiment quitter l'installation?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licence"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"Le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-après dénommés les « Logiciels ».\n"
-"Les Logiciels comprennent notamment, mais de façon non limitative,\n"
-"l'ensemble des programmes, procédés, règles et documentations \n"
-"relatifs au système d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le présent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"manière que ce soit indique que vous reconnaissez avoir préalablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du présent contrat de licence. En cas de désaccord avec le présent "
-"document \n"
-"vous n'êtes pas autorisé à installer, reproduire et utiliser de quelque \n"
-"manière que ce soit ce produit.\n"
-"Le contrat de licence sera résilié automatiquement et sans préavis dans le \n"
-"cas où vous ne vous conformeriez pas aux dispositions du présent document. \n"
-"En cas de résiliation vous devrez immédiatement détruire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'état \n"
-"et sans aucune garantie. MandrakeSoft S.A. décline toute responsabilité \n"
-"découlant d'un dommage direct, spécial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de façon non limitative, tout dommage entraîné par les pertes de \n"
-"bénéfices, interruptions d'activité, pertes d'informations commerciales ou \n"
-"autres pertes pécuniaires, ainsi que des éventuelles condamnations et \n"
-"indemnités devant être versées par suite d'une décision de justice, et ce \n"
-"même si MandrakeSoft S.A. a été informée de la survenue ou de \n"
-"l'éventualité de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT À LA DÉTENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIBÉS DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront être \n"
-"tenus responsable à raison d'un préjudice spécial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de façon non \n"
-"limitative les pertes de bénéfices, interruptions d'activité, pertes \n"
-"d'informations commerciales ou autres pertes pécuniaires, ainsi que \n"
-"des éventuelles condamnations et indemnités devant être versées par suite \n"
-"d'une décision de justice) qui ferait suite à l'utilisation, la détention \n"
-"ou au simple téléchargement depuis l'un des sites de téléchargement de \n"
-"Mandrake Linux de logiciels prohibés par la législation à laquelle vous \n"
-"êtes soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constitués de modules logiciels créés par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribués sous \n"
-"les termes de la Licence Publique Générale GNU (ci-après dénommée « GPL »)\n"
-"ou d'autres licences similaires. La plupart de ces licences vous "
-"permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"régissent. Veuillez lire et agréer les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence d'un Logiciel est à soumettre à l'auteur (ou à ses\n"
-"représentants) du Logiciel et non à MandrakeSoft. \n"
-"Les programmes conçus par MandrakeSoft sont régis par la licence GPL. \n"
-"La documentation rédigée par MandrakeSoft fait l'objet d'une licence \n"
-"spécifique. Veuillez vous référez à la documentation pour obtenir plus \n"
-"de précisions.\n"
-"\n"
-"\n"
-"4. Propriété intellectuelle\n"
-"\n"
-"Tous les droits, titres et intérêts des différents Logiciels sont la \n"
-"propriété exclusive de leurs auteurs respectifs et sont protégés au titre \n"
-"des droits de propriété intellectuelle et de copyright applicables aux "
-"Logiciels.\n"
-"Les marques \"Mandrake\" et \"Mandrake Linux\" ainsi que les \n"
-"logotypes associés sont déposés par MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Dispositions diverses\n"
-"\n"
-"Si une disposition de ce contrat de licence devait être déclarée nulle, \n"
-"illégale ou inapplicable par un tribunal compétent, cette disposition sera \n"
-"exclue du présent contrat. Vous continuerez à être liés aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis à la Loi française. Toute contestation relative aux présentes \n"
-"dispositions sera réglée préalablement par voie amiable. A défaut d'accord\n"
-"avec MandrakeSoft S.A., les tribunaux compétents de Paris seront saisis du \n"
-"litige. Pour toute question relative au présent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Clavier"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Veuillez choisir votre type de clavier."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Voici la liste complète des claviers disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Quelle classe d'installation désirez-vous utiliser ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installation/Mise-à-jour"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Désirez-vous faire une installation ou une mise-à-jour ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recommandée"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Mise-à-jour"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Mise-à-jour seulement des paquetages"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Veuillez choisir le type de votre souris."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port souris"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Veuillez choisir le port série sur lequel votre souris est connectée."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Émulation des boutons"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Émulation du bouton 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Émulation du bouton 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuration des cartes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configuration IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Aucune partition disponible"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Examen des partitions afin d'identifier les points de montage"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Choix des points de montage"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"La table des partitions ne peut être lue car elle est trop endommagée.\n"
-"Il est possible de réinitialiser les partitions endommagées (TOUTES LES\n"
-"DONNÉES seront perdues). Une autre solution consiste à ne pas autoriser\n"
-"le logiciel DrakX à modifier la table des partitions (l'erreur est %s)\n"
-"\n"
-"Êtes-vous d'accord pour perdre toutes vos partitions ?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ne peut pas lire la table des partitions de façon satisfaisante.\n"
-"Vous pouvez continuer, mais à vos risques et périls."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pas de place libre pour la partition d'amorçage (bootstrap) de 1 Mo."
-"L'installation va\n"
-"continuer, mais pour que votre système puisse démarrer, vous aurez besoin "
-"de\n"
-"créer la partition d'amorçage avec DiskDrake."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Impossible de trouver une partition racine pour procéder à une mise à jour."
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partition racine"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Quelle est la partition racine (/) de votre système ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Vous devez redémarrer pour que les modifications apportées à la\n"
-"table des partitions soient prises en compte"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Sélectionnez les partitions que vous souhaitez formater"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Vérifier la présence de secteurs endommagés ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatage des partitions"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Création et formatage du fichier %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Le swap est insuffisant pour achever l'installation, veuillez en ajouter."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Recherche des paquetages disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Recherche des paquetages à mettre à jour..."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Votre système ne dispose pas d'assez d'espace libre pour l'installation ou "
-"la mise-à-jour (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Complète (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimale (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recommandée (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vous avez le choix entre :\n"
-"- Sauver sur disquette la sélection des paquetages.\n"
-"- Établir un nouveau choix de sélection à partir d'une sauvegarde sur "
-"disquette.\n"
-"Le format est le même que celui des disquettes générées pour l'installation "
-"automatisée."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Charger à partir d'une disquette..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Chargement depuis la disquette..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Sélection des paquetages"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Insérez une disquette contenant une sélection de paquetages."
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Sauvegarder sur disquette..."
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "La taille sélectionnée est plus importante que la place disponible"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Type d'installation"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Vous n'avez sélectionné aucun groupe de paquetages\n"
-"Veuillez choisir l'installation minimale voulue."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Avec X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Avec la documentation de base (recommandé !)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Installation vraiment minimale (et en particulier pas d'urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si vous possédez tous les cédéroms ci-dessous, cliquez sur « OK ».\n"
-"Si vous n'en possédez aucun, cliquez sur « Annuler ».\n"
-"Sinon désélectionnez ceux que vous n'avez pas, puis cliquez sur « OK »."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "cédérom « %s »"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Préparation de l'installation"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installation du paquetage %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuration post-installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insérez la disquette d'amorçage utilisée dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insérez la disquette de mise-à-jour de modules dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Vous avez maintenant la possibilité de télécharger des paquetages contenant "
-"des logiciels faisant usage de cryptographie si votre connexion internet est "
-"correctement configurée.\n"
-"\n"
-"\n"
-"ATTENTION : EN RAISON DE LA DIVERSITÉ DES RÉGLEMENTATIONS CONCERNANT CES "
-"LOGICIELS, VOUS DEVEZ VOUS ASSURER QUE LES LOIS ET RÈGLEMENTS AUXQUELS VOUS "
-"ÊTES SOUMIS VOUS AUTORISENT À LES TÉLÉCHARGER, LES STOCKER ET/OU LES "
-"UTILISER.\n"
-"\n"
-"\n"
-"NOUS ATTIRONS TOUT PARTICULIÈREMENT VOTRE ATTENTION SUR LE RESPECT DE LA "
-"RÉGLEMENTATION EN VIGUEUR DANS VOTRE PAYS. VOUS VOUS EXPOSEZ À DE GRAVES "
-"SANCTIONS EN CAS DE VIOLATION DESDITES RÈGLES.\n"
-"\n"
-"\n"
-"EN AUCUN CAS, NI MANDRAKESOFT NI SES FOURNISSEURS NE POURRONT ÊTRE TENUS "
-"RESPONSABLES À RAISON D'UN PRÉJUDICE SPÉCIAL, INDIRECT OU ACCESSOIRE, DE "
-"QUELQUE NATURE QUE CE SOIT (NOTAMMENT LES PERTES DE BÉNÉFICES, INTERRUPTIONS "
-"D'ACTIVITÉ, PERTES D'INFORMATIONS COMMERCIALES OU AUTRES PERTES PÉCUNIAIRES, "
-"AINSI QUE DES ÉVENTUELLES CONDAMNATIONS ET INDEMNITÉS DEVANT ÊTRE VERSÉES "
-"PAR SUITE D'UNE DÉCISION DE JUSTICE) QUI FERAIT SUITE À L'UTILISATION, LA "
-"DÉTENTION OU AU SIMPLE TÉLÉCHARGEMENT DES LOGICIELS DE CRYPTOGRAPHIE "
-"AUXQUELS VOUS POURREZ ÉVENTUELLEMENT ACCÉDER APRÈS AVOIR VALIDÉ LE PRÉSENT "
-"ACCORD.\n"
-"\n"
-"\n"
-"Si vous résidez en France, le présent accord est soumis à loi française. Si "
-"vous résidez hors de France, le droit local pourra, le cas échéant, "
-"s'appliquer.\n"
-"\n"
-"\n"
-"Au cas où vous auriez des questions concernant cet accord, veuillez vous "
-"mettre en relation avec :\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Vous avez maintenant la possibilité de télécharger les mises à jour\n"
-"créées depuis la sortie de cette version de Mandrake Linux.\n"
-"\n"
-"Il s'agit de correctifs de sécurité, ou de correction de bogues,\n"
-"et vous aurez besoin d'une connexion internet pour les obtenir.\n"
-"\n"
-"Voulez-vous installer les mises-à-jour ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Connexion au site web de Mandrake Linux pour obtenir la liste des serveurs "
-"miroirs disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Choisissez un serveur miroir d'où télécharger les paquetages"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Téléchargement de la liste des paquetages disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Quelle est votre fuseau horaire ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Horloge système réglée sur le Temps Universel (GMT)"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Synchronisation automatique de l'horloge (via NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Serveur NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Serveur CUPS distant"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Pas d'imprimante"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Possédez-vous une carte son ISA ?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Lancez « sndconfig » après l'installation pour configurer la carte son"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Aucune carte son detectée. Essayez avec « harddrake » après l'installation"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Résumé"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Souris"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuseau horaire"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Imprimante"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Carte RNIS/ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Carte son"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Carte TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fichiers locaux"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Mot de passe root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Pas de mot de passe"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ce mot de passe est trop court (minimum %d caractères)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Authentification"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Authentification LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Racine (dn) LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Serveur LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Authentification NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domaine NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Serveur NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Une disquette d'amorçage permet de lancer votre système Linux\n"
-"sans utiliser le programme d'amorçage du disque dur.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer SILO sur votre système,\n"
-"si un autre système d'exploitation supprime le programme d'amorçage, ou "
-"encore\n"
-"si ce dernier ne peut être installé sur votre machine.\n"
-"\n"
-"Vous pouvez également utiliser cette disquette avec l'image de secours "
-"Mandrake.\n"
-"Cela permet une récupération plus aisée du système en cas de problèmes "
-"majeurs.\n"
-"\n"
-"Si vous voulez créer une disquette d'amorçage pour votre système, insérez \n"
-"une disquette dans le premier lecteur et appuyer sur \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Premier lecteur de disquette"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Second lecteur de disquette"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Abandonner"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Une disquette d'amorçage permet de lancer votre système Linux\n"
-"sans utiliser le programme d'amorçage du disque dur.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer LILO sur votre système,\n"
-"si un autre système d'exploitation supprime le programme d'amorçage, ou "
-"encore\n"
-"si ce dernier ne peut être installé sur votre machine.\n"
-"\n"
-"Vous pouvez également utiliser cette disquette avec l'image de secours "
-"Mandrake.\n"
-"Cela permet une récupération plus aisée du système en cas de problèmes "
-"majeurs.\n"
-"\n"
-"Désirez-vous créer une disquette d'amorçage pour votre système ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ATTENTION ! Vous utilisez XFS pour votre partition racine,\n"
-"créer une disquette de boot 1.44 Mb va probablement échouer,\n"
-"parce que XFS a besoin d'un pilote très gros)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Désolé, aucun lecteur de disquette ne semble disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Choisissez le lecteur de disquette à utiliser pour\n"
-"créer votre disquette d'amorçage."
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insérez une disquette dans le %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Création de la disquette d'amorçage..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Préparation du programme d'amorçage..."
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Il semble que votre machine ne soit pas dotée de l'architecture « NewWorld "
-"».\n"
-"Le programme d'amorçage « yaboot » ne fonctionnera pas.\n"
-"L'installation va continuer, mais vous aurez besoin de « BootX » pour "
-"démarrer\n"
-"votre machine."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Désirez-vous utiliser « aboot » ?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Une erreur est survenue lors de l'installation de « aboot ».\n"
-"Désirez-vous forcer l'installation au risque de détruire la\n"
-"première partition du disque ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Installation du programme d'amorçage..."
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"L'installation du programme d'amorçage a échoué pour la raison suivante :"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Vous aurez peut-être besoin de changer le périphérique d'amorçage\n"
-"de l'OpenFirmware pour activer le programme d'amorçage. Si vous\n"
-"ne voyez pas apparaître l'invite du programme d'amorçage lorsque\n"
-"vous redémarrerez, appuyez sur Command-Option-O-F au démarrage et\n"
-"entrez :\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"Puis tapez : shut-down\n"
-"Au prochain démarrage vous devriez voir apparaître l'invite du\n"
-"programme d'amorçage."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insérez une disquette vierge dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Création de la disquette d'auto-installation..."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Certaines étapes ne sont pas terminées.\n"
-"\n"
-"Voulez-vous vraiment quitter maintenant ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Félicitations, l'installation est terminée.\n"
-"Enlevez la disquette ou le cédérom d'amorçage et appuyez sur « Entrée ».\n"
-"\n"
-"\n"
-"Pour toutes informations sur les corrections disponibles pour cette version "
-"de Mandrake Linux, consultez les Errata disponibles depuis :\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Des informations sur la configuration de votre système sont \n"
-"disponibles dans le Guide de l'Utilisateur de Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Créer une disquette d'auto-installation"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L'auto-installation peut être complètement automatique si nécessaire,\n"
-"dans ce cas elle prend le contrôle du disque dur !!\n"
-"(prévu pour l'installation d'une autre machine).\n"
-"\n"
-"Vous pouvez préférer rejouer l'installation.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatisée"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Rejouer"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Sauvegarder la sélection des paquetages..."
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installation de Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab> suivant | <Alt-Tab> précédent | <Espace> sélectionner | <F12> Écran "
-"suivant "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "le programme « kdesu » est introuvable"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "le programme « consolehelper » est introuvable"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Choisissez un fichier"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avancé"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Basique"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Veuillez patienter"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Information"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Développer l'arborescence"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Réduire l'arborescence"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Basculer entre tri alphabétique et tri par groupes"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Choix erroné. Veuillez recommencer\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Que choisissez-vous ? (%s par défaut) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Champs que vous devrez remplir :\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Votre choix ? (0/1, défaut « %s »)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Bouton « %s » : %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Désirez-vous cliquer sur ce bouton ?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Que choisissez-vous ? (« %s »%s par défaut) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Il y a beaucoup de choses à choisir (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Veuillez choisir le premier nombre du groupe de 10 que vous\n"
-"souhaitez modifier, ou appuyez juste sur <Entrée> pour continuer.\n"
-"Votre choix ? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Notez qu'un message a changé :\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Revalider"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "tchèque (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "allemand"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak standard"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "espagnol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "finlandais"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "français"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norvégien"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "polonais"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "russe"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "suédois"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "anglais"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "américain (États-Unis)"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "albanais"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "arménien (ancien)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "arménien (machine à écrire)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "arménien (phonétique)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerbaïdjanais (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belge"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "bulgare (phonétique)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "bulgare (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brésilien"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "blélorusse"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "suisse (allemand)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "suisse (français)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "tchèque (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "allemand (sans touches mortes)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "danois"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak américain"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak norvégien"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak suédois"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "estonien"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "géorgien (disposition russe)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "géorgien (disposition latine)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "grec"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "hongrois"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "croate"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "israélien"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "israélien (phonétique)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "iranien"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "islandais"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "italien"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japonais 106 touches"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "coréen"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latino-américain"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "lituanien (AZERTY, ancien modèle)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "lituanien (AZERTY, nouveau modèle)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "lituanien « ligne de nombres » QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "lituanien « phonétique » QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "letton"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "macédonien"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "hollandais"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "polonais (QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "polonais (QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugais"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "canadien (Québec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "roumain (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "roumain (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "russe (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "slovénien"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "slovaque (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "slovaque (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "serbe (cyrillique)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "tamoul"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "thaïlandais"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "tadjik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turc (modèle traditionnel « F »)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turc (modèle moderne « Q »)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukrainien"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "américain (international)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietnamien « colonne numérique » QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "yougoslave (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Touche Alt droite"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Deux touches Shift simultanément"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Touches Control et Shift simultanément"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Touche CapsLock (verrouillage majuscule)"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Touches Ctrl et Alt simultanément"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Touches Alt et Shift simultanément"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Touche « Menu »"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Touche « Windows » gauche"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Touche « Windows » droite"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Points de montage circulaires %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Enlevez d'abord les volumes logiques\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Le support du PCMCIA n'est plus disponible avec les noyaux 2.2. Veuillez "
-"utiliser un noyau 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Souris SUN"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Souris standard PS2 à molette"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 bouton"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Souris standard à 2 boutons"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Générique"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roulette"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "série"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Souris standard à 3 boutons"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Souris Logitech (série, ancien modèle C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "souris bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 boutons"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 boutons"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "aucun"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Pas de souris"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Veuillez tester votre souris"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Pour activer la souris,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "veuillez faire tourner la molette"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Terminer"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Suivant ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Précédent"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Est-ce correct ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connexion à l'internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La façon la plus courante de se connecter à l'internet en utilisant\n"
-"une ligne ADSL est d'utiliser « pppoe ».\n"
-"\n"
-"Certaines connexions utilisent « pptp », quelques unes se servent de « DHCP "
-"».\n"
-"\n"
-"Si vous ne savez pas quoi choisir, utilisez pppoe."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "utiliser « dhcp »"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "utiliser « pppoe »"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "utiliser « pptp »"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quel client DHCP désirez-vous utiliser ?\n"
-"\n"
-"Le client par défaut est « dhcpcd »."
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Aucune carte réseau n'a été détectée sur votre système.\n"
-"La connexion ne peut donc pas être configurée."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Choisissez la carte réseau"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Veuillez choisir la carte réseau qui sera connectée à l'internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Aucune carte réseau n'a été identifiée"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configuration du réseau"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Veuillez indiquer le nom d'hôte de votre machine si vous le connaissez.\n"
-"Certains serveurs DHCP ont besoin de ce nom d'hôte pour fonctionner.\n"
-"Celui-ci doit être pleinenement qualifié, comme par exemple :\n"
-"mamachine.monlabo.masociete.com"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nom d'hôte :"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Assistant de configuration réseau"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem RNIS/ISDN externe"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Carte RNIS/ISDN interne"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Quel est le type de votre connexion RNIS/ISDN ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Quelle configuration RNIS/ISDN préférez-vous?\n"
-"\n"
-"- L'ancienne configuration contient des outils puissants,\n"
-"  mais est difficile à configurer, et n'est pas standard.\n"
-"  Elle utilise « isdn4net »\n"
-"- La nouvelle configuration est plus facile à comprendre\n"
-"  et plus standard, mais a moins d'outils.\n"
-"  Elle utilise « isdn-light »\n"
-"Nous recommandons la seconde (isdn-light)\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "nouvelle configuration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ancienne configuration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuration RNIS/ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Veuillez choisir votre fournisseur d'accès.\n"
-"S'il ne figure pas dans la liste, choisissez « Non listé »."
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocole pour l'Europe"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocole pour l'Europe (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocole pour le reste du monde"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocole pour le reste du monde \n"
-" Pas de D-Channel (lignes louées)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Quel protocole désirez-vous utiliser ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Quel type de carte possédez-vous ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Je ne sais pas"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si vous possédez une carte ISA, les données du prochain écran devraient\n"
-"être correctes.\n"
-"\n"
-"Si vous possédez une carte PCMCIA, vous avez besoin de connaître\n"
-"les réglages « IRQ » et « IO » de votre carte.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Arrêter"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuer"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Quel est le modèle de votre carte RNIS/ISDN ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Une carte RNIS/ISDN a été détectée mais son type est inconnu. Veuillez "
-"sélectionner une carte PCI dans le prochain écran."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Aucune carte RNIS/ISDN identifiée. Veuillez en sélectionner une dans le\n"
-"prochain écran."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Veuillez choisir le port série sur lequel votre modem est connecté."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Options d'appel"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nom de la connexion"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Numéro de téléphone"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Identifiant de connexion"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Basée sur un script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Manuelle par terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nom de domaine"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "serveur DNS principal (optionnel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "serveur DNS secondaire (optionnel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez vous déconnecter ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Vous êtes actuellement connecté à l'internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez vous connecter à l'internet ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Vous n'êtes actuellement pas connecté à l'internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Connecter"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Se déconnecter"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configurez la connection"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Connexion internet et configuration"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nous allons configurer la connexion %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nous allons maintenant configurer la connexion %s.\n"
-"\n"
-"\n"
-"Cliquez sur OK pour continuer."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuration du réseau"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Comme vous êtes en train de faire une installation réseau,\n"
-" cela veut dire que votre réseau est déjà configuré.\n"
-"Cliquez sur <Ok> pour conserver votre configuration,\n"
-"ou sur <Annuler> pour reconfigurer votre connexion internet et réseau.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenue dans l'assistant de configuration réseau.\n"
-"\n"
-"Nous sommes sur le point de configurer votre connexion internet et réseau.\n"
-"Si vous ne souhaitez pas utiliser la détection automatique, désélectionnez "
-"la case correspondante.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Choisissez le profil à configurer"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Utiliser la détection automatique"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Détection des périphériques..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Connexion par modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "détecté sur le port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Connexion par RNIS/ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "détecté %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Connexion par ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "détecté sur l'interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Connexion par Cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Connexion par Cable détectée"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Connection à travers un réseau local (LAN)"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "carte(s) ethernet détectée(s)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Choisissez la connexion que vous voulez configurer"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vous avez configuré plusieurs moyens d'accès à l'internet.\n"
-"Choisissez celui que vous voulez utiliser.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Connexion internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Désirez-vous activer la connexion lors du démarrage ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuration du réseau"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Le réseau doit être redémarré"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Un problème est survenu pendant le redémarrage du réseau : \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Félicitations, votre choix de configuration internet et réseau est "
-"terminée.\n"
-"La configuration va maintenant être appliquée à votre système.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Une fois terminé, il est recommandé de redémarrer votre interface graphique, "
-"afin d'éviter les problèmes liés au changement de nom d'hôte de la machine."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Des problèmes sont apparus pendant la configuration.\n"
-"Testez votre connexion avec le « Centre de Contrôle Mandrake » (dans la "
-"section « réseau ») ou la commande « net_monitor ». Si votre connexion ne "
-"fonctionne pas, vous pouvez essayer de relancer la configuration."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATTENTION : Ce périphérique a déjà été configuré pour la connexion "
-"internet.\n"
-"\n"
-"Cliquez simplement sur « OK » pour conserver sa configuration.\n"
-"Sinon la configuration actuelle sera écrasée par les modifications que vous "
-"ferez."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Veuillez indiquer la configuration IP de cette machine.\n"
-"Chaque champ doit être complété avec une adresse IP en notation\n"
-"décimale pointée (par exemple, 12.34.56.78)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configuration du périphérique réseau %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (pilote %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adresse IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Masque de sous-réseau"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Attribution automatique de l'adresse IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adresse IP doit ressembler à quelque chose comme « 192.168.1.20 »"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Veuillez indiquer un nom d'hôte pour la machine.\n"
-"Celui-ci doit être un nom de machine pleinement qualifié, par exemple :\n"
-"mamachine.monlabo.masociete.com\n"
-"Vous pouvez également indiquer l'adresse IP de la passerelle\n"
-"si votre réseau local en possède une."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Serveur DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Passerelle (p.ex. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Périphérique passerelle"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuration des serveurs mandataires (proxy)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Serveur mandataire HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Serveur mandataire FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Identifiant de la carte réseau (utile pour les portables)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "La syntaxe doit être http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "La syntaxe doit être ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuration de l'accès internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voulez-vous vous connecter à l'internet maintenant ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Test de votre connexion..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Le système est à présent connecté à l'internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Pour des raisons de sécurité, il va être déconnecté maintenant."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Le système ne semble pas connecté à l'internet.\n"
-"Essayez de reconfigurer votre connection."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuration de la connexion"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Veuillez compléter ou vérifier les champs ci-dessous"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "n° IRQ de la carte"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Plage mémoire (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S de la carte"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_O de la carte"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 de la carte"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Votre numéro de téléphone personnel"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Fournisseur d'accès (ex.: provider.fr)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Numéro de téléphone pour l'accès"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1er DNS du fournisseur (optionnel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2ème DNS du fournisseur (optionnel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Choisissez votre pays"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Numérotation"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Vitesse de connexion"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Temps maxi pour établir la connexion (en sec.)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "nom d'utilisateur du compte"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Mot de passe du compte"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "Le montage a échoué : "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Les partitions étendues ne sont pas supportée par cette plateforme"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Il y a un espace vide dans la table des partitions mais il est\n"
-"inutilisable. La seule solution est de déplacer vos partitions primaires\n"
-"de telle façon que cet espace soit placé contre les partitions étendues."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restauration impossible depuis le fichier %s : %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Mauvais fichier de sauvegarde"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erreur d'écriture dans le fichier %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Votre disque dur semble avoir un problème matériel :\n"
-"le test pour vérifier son aptitude à conserver l'intégrité des données a "
-"échoué.\n"
-"Cela signifie que serez victime de pertes aléatoires de données."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "doit avoir"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "très utile"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "utile"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "éventuellement"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nouvelle Génération"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Imprimante locale"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Imprimante distante"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Imprimante sur serveur CUPS distant"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Imprimante sur serveur LPD distant"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Imprimante réseau autonome (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Imprimante sur serveur SMB (Windows 95/98/NT)"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Imprimante sur serveur NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Indiquer l'adresse du périphérique d'impression"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Impression vers une commande shell"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modèle inconnu"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Imprimantes locales"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Imprimantes distantes"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " sur port parallèle \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", imprimante USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", périphérique multi-fonctions sur le port parallèle \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", périphérique  USB multi-fonctions"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", périphérique HP JetDirect multi-fonctions"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", périphérique multi-fonctions"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", impression sur %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "sur serveur d'impression LPD « %s », imprimante « %s »"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", hôte TCP/IP « %s », port « %s »"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "sur serveur Windows « %s », partage « %s »"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "sur serveur Novell « %s », imprimante « %s »"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", en utilisant la commande %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Imprimante à accès direct (pas de pilote)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(sur %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(sur cette machine)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Sur serveur CUPS « %s »"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Défaut)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Type de connexion de l'imprimante"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Quel est le type de connexion de l'imprimante ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Si vous utilisez un serveur CUPS distant, vous n'avez pas besoin de "
-"configurer d'imprimante ici. Elles seront automatiquement détectées."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Configuration de CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Specifiez le serveur CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Avec les serveurs CUPS distants, vous n'avez pas besoin de configurer "
-"d'imprimante ici ; ceux-ci doivent fournir automatiquement à votre machine "
-"des informations sur les imprimantes disponibles. Toutes les imprimantes "
-"connues de votre ordinateur sont actuellement listées dans le champ "
-"« Imprimante par défaut ». Choisissez l'imprimante par défaut pour votre "
-"machine, puis cliquez sur le bouton « Valider / Rafraîchir ». Ce bouton sert "
-"également à rafraîchir la liste. (il peut se passer jusqu'à 30 secondes "
-"avant que toutes les imprimantes distantes soient visibles). Si le serveur "
-"CUPS est sur un réseau différent, vous devez préciser son adresse IP, et "
-"éventuellement le numéro de port afin d'obtenir les informations sur les "
-"imprimantes. Sinon, laissez ces champs vides."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalement, CUPS est configuré automatiquement en fonction de votre "
-"environnement réseau, de façon que vous puissiez accéder aux imprimantes "
-"gérées par les serveurs CUPS de votre réseau local. Si cela ne fonctionne "
-"pas, désactivez « configuration automatique  de CUPS » et éditez le fichier "
-"manuellement le fichier /etc/cups/cupsd.conf. N'oubliez pas ensuite de "
-"relancer CUPS (à l'aide de la commande : « service cups restart » ou bien "
-"avec le « Centre de Contrôle Mandrake » dans la section « Services »)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'adresse IP doit ressembler à quelque chose comme « 192.168.1.20 »"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Le numéro de port doit être un nombre entier !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "Adresse IP du serveur CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Configuration automatique du serveur CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Détection des périphériques..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test des ports"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Ajouter une nouvelle imprimante"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Bienvenue dans l'Assistant de Configuration d'Imprimante\n"
-"\n"
-"Cet assistant permet de configurer des imprimantes locales ou réseau afin "
-"d'être utilisée à partir de cette machine ainsi que des autres machines du "
-"réseau.\n"
-"\n"
-"Toutes les informations nécessaires pour configurer l'imprimante vous seront "
-"demandées; vous aurez également accès à tous les pilotes d'imprimantes "
-"disponibles ainsi qu'à toutes leurs options et à tous les types de "
-"connection."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Imprimante locale"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Bienvenue dans l'Assistant de configuration de l'imprimante.\n"
-"\n"
-"Cet assistant vous aidera à installer les imprimantes connectées\n"
-"à cet ordinateur.\n"
-"\n"
-"Veuillez maintenant brancher vos imprimantes sur l'ordinateur, \n"
-"et allumez-les, puis cliquez sur « suivant ». Si vous ne voulez pas\n"
-" installer d'imprimante maintenant, cliquez sur « annuler ».\n"
-"\n"
-"Notez que certains ordinateurs peuvent planter pendant\n"
-"l'autodétection, donc dans ce cas déselectionnez « Détection\n"
-"automatique des imprimantes ». Utilisez le mode expert de\n"
-"printerdrake si vous voulez installer une imprimante réseau\n"
-"qui n'est pas listée automatiquement."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Détection automatique des imprimantes"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Félicitation, votre imprimante est maintenant installée et configurée.\n"
-"\n"
-"Vous pouvez imprimer en utilisant la commande « imprimer » de vos\n"
-"applications (souvent dans le menu « fichier »).\n"
-"\n"
-"Si vous voulez ajouter, enlever ou renommer une imprimante, ou sivous voulez "
-"changer les options par défaut (alimentation papier,qualité d'impression, "
-"etc.), rendez-vous dans la partie « imprimante »de la section « matériel » "
-"du Centre de Contrôle Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Détection automatique des imprimantes"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake est capable d'auto-détecter les imprimantes parallèle et USB\n"
-"connectées directement à votre ordinateur, mais veuillez noter que sur\n"
-"certains systèmes la détection automatique PEUT BLOQUER VOTRE ORDINATEUR\n"
-"ET DONC PEUT-ÊTRE CORROMPRE VOTRE SYSTÈME DE FICHIERS !\n"
-"Faites-le donc À VOS RISQUES ET PÉRILS !\n"
-"\n"
-"Voulez-vous vraiment auto-détecter vos imprimantes ?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Lancer la détection automatique"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Configurer l'imprimante manuellement"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Détecté %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Imprimante sur le port parallèle \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Imprimante USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Aucune imprimante locale n'a pu être trouvée!\n"
-"Pour en installer une manuellement entrez un nom de périphérique ou de "
-"fichier sur la ligne d'entrée (Ports parallèles : /dev/lp0, /dev/lp1, ..., "
-"équivalents à LPT1:, LPT2:, ..., première imprimante USB : /dev/usb/lp0, "
-"deuxième imprimante USB : /dev/usb/lp1, ...) "
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Vous devez enter un nom de fichier ou de périphérique!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Aucune imprimante locale n'a pu être trouvée!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Les imprimantes réseaux ne peuvent être configurées qu'après l'installation. "
-"Choississez « Matériel » puis « Imprimantes » dans le Centre de Contrôle de "
-"Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Pour installer les imprimantes réseaux, cliquez sur « Annuler », puis passez "
-"en « Mode Expert » et cliquez à nouveau sur « Ajouter une nouvelle "
-"imprimante »."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"L'imprimante suivante a été auto-détectée; si ce n'est pas celle que vous "
-"voulez configurer, tapez un nom de fichier ou de périphérique dans le champs "
-"d'entrée"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Voici une liste de toutes les imprimantes auto-détectées. Veuillez choisir "
-"l'imprimante que vous voulez configurer ou tapez un nom de périphérique ou "
-"de fichier dans le champs d'entrée"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"L'imprimante suivante a été auto-détectée. La configuration de cette "
-"imprimante sera effectuée automatiquement. Si votre imprimante n'a pas été "
-"correctement détectée ou si vous préférer effectuer une configuration "
-"personalisée, activez « Configuration Manuelle  » ."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Voici une liste de toutes les imprimantes auto-détectées. Veuillez choisir "
-"l'imprimante que vous voulez configurer. La configuration de cette "
-"imprimante sera effectuée automatiquement. Si votre imprimante n'a pas été "
-"correctement détectée ou si vous préférer effectuer une configuration "
-"personalisée, activez « Configuration Manuelle  » .\""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Veuillez choisir le port sur laquelle votre imprimante est connectée ou "
-"tapez le nom du périphérique ou de fichier dans le champs d'entrée"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Veuillez choisir le port sur lequel votre imprimante est connectée."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Ports parallèles : /dev/lp0, /dev/lp1, ..., équivalents à LPT1:, "
-"LPT2:, ..., première imprimante USB : /dev/usb/lp0, deuxième imprimante "
-"USB : /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Vous devez choisir ou entrer une imprimante ou un périphérique !"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Configuration manuelle"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Votre imprimante est-elle un appareil multifonction de HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 with scanner) ?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installation du paquetage HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Vérification du périphérique et configuration de HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installation du paquetage SANE ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Acquisition à partir de votre périphérique multi-fonction HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Mise à disposition du port imprimante pour CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Lecture de la base de données des imprimantes..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Configuration d'une imprimante Unix (lpd) distante"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Pour utiliser une imprimante Unix distante, vous devez indiquer le nom "
-"d'hôte du serveur LPD et le nom attribué à l'imprimante par ce serveur."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nom d'hôte du serveur"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nom du serveur distant manquant !"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Le nom de l'imprimante est manquant !"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Configuration d'une imprimante SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Afin de pouvoir accéder à une imprimante connectée à un serveur SMB, vous "
-"devez indiquer le nom SMB du serveur (attention, ce dernier peut être "
-"différent de son nom TCP/IP) et, éventuellement, son adresse IP ainsi que le "
-"nom de l'imprimante et toute information applicable quant au nom "
-"d'utilisateur, mot de passe et groupe de travail nécessaires pour accéder à "
-"l'imprimante."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Nom du serveur"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Adresse IP du serveur"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nom de partage de l'imprimante"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Groupe de travail"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Il faut au moins préciser le nom du serveur ou son adresse IP."
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Il faut préciser le nom de partage de l'imprimante."
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "ALERTE DE SÉCURITÉ !"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Options de l'imprimante NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Pour pouvoir utiliser une imprimante connectée à un serveur Netware, vous "
-"devez au moins indiquer le nom Netware du serveur (qui peut être différent "
-"du nom d'hôte TCP/IP) et le nom de la file d'impression à laquelle vous "
-"voulez accéder ainsi qu'un nom de login et un mot de passe si nécessaire."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Nom du serveur d'impression"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nom de la file d'impression"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Nom du serveur NCP manquant!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nom de la file d'attente NCP manquant!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Options de l'imprimante réseau (TCP/socket)"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Pour imprimer sur une imprimante TCP ou socket, vous devez indiquer le\n"
-"nom d'hôte de l'imprimante et, optionellement, le numéro du port.\n"
-"Pour les serveurs d'impression « HP JetDirect », le numéro du\n"
-"port est habituellement 9100, mais cela peut être différent pour\n"
-"d'autres serveurs. Veuillez consulter le manuel de votre imprimante."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nom d'hôte de l'imprimante"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nom d'hôte de l'imprimante manquant !"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Adresse réseau du périphérique d'impression"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Si vous la connaissez, vous pouvez spécifier directement l'adresse réseau "
-"(URL) qui permet d'accéder à l'imprimante. Choisissez un en-tête puis "
-"complétez l'adresse en respectant les spécifications CUPS ou Foomatic. Notez "
-"que tous les types d'URL ne sont pas supportés par tous les gestionnaires "
-"d'impression."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Une adresse valide doit être entrée !"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Toute imprimante a besoin d'un nom (par exemple « lpr ») auquel on se réfère "
-"pour pouvoir imprimer.\n"
-"Les champs « Description » et « Emplacement » n'ont pas besoin d'être "
-"remplis. Ce sont de simples commentaires pour les utilisateurs."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Description"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Emplacement"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Préparation de la base de données des imprimantes..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Le modèle de votre imprimante"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Le nom de modèle résultant de l'autodétection a été comparée à la basede "
-"données d'imprimantes pour trouver la meilleure correspondance.Ce choix peut "
-"être mauvais, particulièrement si votre modèle d'imprimanten'apparaît pas "
-"dans la base de données. Vérifiez ce choix, puis cliquez sur« Le modèle est "
-"correct », ou le cas échéant sur « Sélectionner manuellement  le modèle ».\n"
-"\n"
-"Votre imprimante a été détectée comme étant :\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Le modèle est correct"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Sélectionner manuellement le modèle"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Sélection du modèle de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Quel modèle d'imprimante possédez-vous ?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Veuillez vérifier si l'imprimante a été correctement détectée Cherchez le "
-"modèle correct dans la liste si le curseur se situe sur un modèle erroné ou "
-"sur « Imprimante à accès direct »."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si votre imprimante n'est pas listée, choisissez-en une compatible (voir le "
-"manuel de l'imprimante) ou similaire."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Configuration de l'imprimante OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Vous êtes en train de configurer une imprimante laser OKI winprinter.\n"
-"Ces imprimantes utilisent un protocole de communication très spécial, et "
-"elles ne fonctionnent que si elles sont connectées au premier port "
-"parallèle. Si votre imprimante est connectée à un autre port ou à un serveur "
-"d'impression, veuillez la connecter au premier port parallèle avant "
-"l'impression de la page de test. Sans cela, l'imprimante ne fonctionnera pas "
-"Vos paramètres de type de connexion seront ignorés par le pilote."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Configuration de l'imprimante Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Les pilotes d'impression inkjet fournis par Lexmark ne permettent que "
-"l'utilisation des imprimantes locales, et pas des imprimantes distantes ou "
-"des serveurs d'impression. Veuillez connecter votre imprimante sur un port "
-"local ou configurez-la sur la machine à laquelle elle est connectée."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Afin de pouvoir imprimer avec votre imprimante Lexmark inkjet et la "
-"configuration actuelle, vous avez besoin des pilotes d'impression inkjet "
-"fournis par Lexmark (http://www.lexmark.com/). Allez sur la section "
-"« Drivers » du site américain de Lexmark, puis choisissez votre modèle et "
-"enfin « Linux » comme système d'exploitation. Les pilotes sont des "
-"paquetages RPM ou des scripts shell avec une installation graphique "
-"interactive. Vous n'avez pas besoin de faire cette configuration avec "
-"l'interface graphique. Annulez directement après l'acceptation de la "
-"licence. Ensuite, imprimez les pages pour l'alignement des têtes "
-"d'impression avec « lexmarkmaintain » et ajustez les paramètres de ces têtes "
-"avec ce programme."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Paramétrage de l'imprimante par défaut.\n"
-"\n"
-"Assurez-vous que la taille de la page et le type d'encre (si disponible) "
-"sont correctement indiqués. Notez que la vitesse d'impression peut diminuer "
-"si vous augmentez la qualité d'impression."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'option %s doit être un nombre entier !"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'option %s être un nombre !"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "L'option %s est en dehors des limites !"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Désirez-vous que l'imprimante « %s » soit l'imprimante\n"
-"par défaut ?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Pages de test"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Merci de sélectionner les pages de test que vous voulez imprimer.\n"
-"Note : la page de test photo peut prendre un temps assez long pour "
-"s'imprimer, et sur les imprimantes laser avec trop peu de mémoire, elle peut "
-"même ne pas sortir.\n"
-"Dans la plupart des cas, l'impression de la page de test standard suffit."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Pas de page de test"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Imprimer"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Page de test standard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Page de test alternative (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Page de test alternative (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Page de test photo"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Ne pas imprimer de page de test"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Impression des pages de test..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Les pages de test ont été envoyées à l'imprimante.\n"
-"Il peut se passer un certain temps avant le début effectif de l'impression.\n"
-"Statut de l'impression :\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Les pages de test ont été envoyées à l'imprimante.\n"
-"Il peut se passer un certain temps avant le début effectif de l'impression.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Êtes-vous satisfait du résultat ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Imprimante à accès direct"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenêtre de "
-"terminal), vous pouvez soit utiliser la commande « %s <fichier> » ou un "
-"utilitaire d'impression graphique: « xpp <fichier> » ou « kprinter "
-"<fichier> ». Les utilitaires graphiques vous permettent de choisir "
-"l'imprimante et de modifier les paramètres d'impression facilement.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Vous pouvez également utiliser ces commandes dans le champ « commande "
-"d'impression » des boîtes de dialogue d'impression dans de nombreuses "
-"applications. Dans ce cas n'indiquez pas le nom du fichier puisqu'il sera "
-"fourni par l'application elle-même.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"La commande « %s » permet également de modifier les paramètres d'impression "
-"pour une impression particulière. Il suffit pour cela d'ajouter les "
-"paramètres voulus sur la ligne de commande. Par exemple, « %s <fichier> ». "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Pour obtenir la liste des paramètres disponibles pour l'imprimante courante, "
-"lisez la liste ci-dessous ou cliquez sur le bouton « liste des options "
-"d'impression ».%s\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Voici la listes des options d'impression disponibles pour l'imprimante "
-"courante:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenêtre de "
-"terminal), utilisez la commande « %s <fichier>».\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Cette commande peut également être utilisée dans le champ « commande "
-"d'impression » des boîtes de dialogue d'impression dans de nombreuses "
-"applications. Dans ce cas, n'indiquez pas le nom du fichier à imprimer "
-"puisque celui-ci sera fourni par l'application elle-même.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Pour obtenir la liste des paramètres disponibles pour l'imprimante courante, "
-"cliquez sur le bouton « liste des options d'impression »."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenêtre de "
-"terminal), utilisez la commande « %s <fichier> » ou « %s <fichier> ».\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Vous pouvez également utiliser l'interface graphique « xpdq » pour "
-"positionner des options d'impression et administrer les travaux "
-"d'impression.\n"
-"Si vous utiliser le bureau KDE, vous disposez d'un « bouton panique », une "
-"icône sur le bureau, nommé « STOP Imprimante ! », qui peut suspendre tous "
-"les travaux d'impression. Ceci peut être utile en cas de bourrage papier, "
-"par exemple.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les commandes « %s » et « %s » permettent également de modifier les "
-"paramètres d'impression pour une impression particulière. Il suffit pour "
-"cela d'ajouter les paramètres voulus sur la ligne de commande, par exemple "
-"« %s <fichier> ».\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Fermer"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Impression/Acquisition sur l'imprimante « %s »"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Impression sur l'imprimante « %s »"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste des options d'impression"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Votre appareil multifonction HP a été configuré automatiquement pour être "
-"capable de scanner. Maintenant vous pouvez scanner avec "
-"« scanimage » ( « scanimage -d hp:%s » pour spécifier le scanner si vous en "
-"avez plus d'un) à partir de la ligne de commande, ou avec des interfaces "
-"graphiques comme « xscanimage » ou « xsane ». Si vous utilisez « Le Gimp », "
-"vous pouvez aussi scanner grace au menu « Fichier / Acquisition ». Pour "
-"avoir plus d'information, vous pouvez taper « man scanimage » ou « man sane-"
-"hp » dans une fenêtre de commandes.\n"
-"\n"
-"N'utilisez pas « scannerdrake » pour cet appareil ! "
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Votre appareil multifonction HP a été configuré automatiquement pour être "
-"capable de scanner. Maintenant vous pouvez scanner avec « tal-hp %s scan ... "
-"» dans une fenêtre de commandes. L'acquisition par interface graphique ou "
-"grace à « Gimp » n'est pas encore suportée avec cet appareil. Vous trouverez "
-"plus d'informations dans le fichier /usr/share/doc/hpoj-0.8/ptal-hp-scan."
-"html sur votre système. Si vous avez une HP LaserJet 1100 ou 1200, vous "
-"pouvez seulement scanner si vous avez l'option « scanner » installée.\n"
-"\n"
-"N'utilisez pas « scannerdrake » pour cet appareil ! "
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Lecture des données de l'imprimante..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transfert de la configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Vous pouvez copier la configuration de l'imprimante faite pour le "
-"gestionnaire %s vers votre gestionnaire actuel %s. Toutes les données de "
-"configuration (nom de l'imprimante, description, emplacement, type de "
-"connexion, et paramètres par défaut) sont récupérées, mais les travaux ne "
-"seront pas transférés.\n"
-"Toutes les files d'attente n'ont pas pu être transférées à cause des raisons "
-"suivantes :\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne supporte pas les imprimantes sur les serveurs Novell ni les "
-"impressions vers des commandes shell.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ne supporte que les imprimantes locales, les imprimantes LPD distantes, "
-"et les imprimantes réseau autonomes.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD et LPRng ne supportent pas les imprimantes IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"De plus, les files d'attente qui n'ont pas été créées avec ce programme ou "
-"avec «foomatic-configure» ne peuvent pas être transférées."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Aussi, les imprimantes configurées avec les fichiers PPD fournis par leur "
-"fabriquant ou avec des pilotes CUPS natifs ne peuvent pas être transférées."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Cochez les imprimantes que vous voulez transférer, et\n"
-"cliquez sur « Transfert »."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Ne pas transférer les imprimantes"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transfert"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Une imprimante nommée « %s » existe déjà sous %s.\n"
-"Cliquez sur « Transfert » pour la remplacer.\n"
-"Vous pouvez également taper un nouveau nom ou\n"
-"simplement ignorer cette imprimante."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Le nom de l'imprimante ne devrait contenir que des lettres, des nombres et "
-"des tirets bas (_)"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"L'imprimante « %s » existe déjà,\n"
-"voulez-vous vraiment écraser sa configuration ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nouveau nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfert de %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Vous avez transféré votre précédente imprimante par défaut (« %s »). Doit-"
-"elle être également l'imprimante par défaut de votre nouveau système "
-"d'impression %s ?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Mise à jour des données de l'imprimante..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Configuration d'une imprimante distante"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Démarrage du réseau..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configurez le réseau maintenant"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Les fonctionnalités du réseau ne sont pas configurées"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Vous êtes sur le point de configurer une imprimante distante. Cela nécessite "
-"un accès au réseau, mais votre réseau n'est pas encore configuré. Si vous "
-"voulez continuer sans configurer le réseau, vous ne pourez pas utiliser "
-"l'imprimante que vous êtes en train de configurer. Que voulez-vous faire ?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Continuer sans configurer le réseau"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"L'interface réseau qui a été configurée pendant l'installation ne peut pas "
-"être démarrée maintenant. Veuillez vérifier si votre réseau est activé après "
-"démarrage. Démarrez le « Centre de Contrôle Mandrake », vérifiez la "
-"configuration dans la section « réseau et internet / connexion ». Puis "
-"essayez à nouveau de configurer l'imprimante dans la section « Matériel / "
-"Imprimante »."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"L'accès réseau n'a pas pu être démarré. Veuillez vérifier la configuration "
-"de votre matériel et de votre accès réseau grâce au « Centre de Contrôle "
-"Mandrake » puis essayez à nouveau de configurer l'imprimante distante."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Redémarrage du système d'impression..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "élevé"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoïaque"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation du système d'impression sous le niveau de sécurité « %s »"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Vous êtes sur le point d'installer le système d'impression %s sur un système "
-"dont le niveau de sécurité est réglé sur « %s ».\n"
-"\n"
-"Ce système d'impression écoute en permanence le réseau afin de répondre aux "
-"requêtes d'impression. Ceci se fait grâce à un processus (daemon) qui tourne "
-"en tâche de fond et qui est accessible par les autres machines du réseau. "
-"C'est donc une cible possible pour des attaques réseau éventuelles. C'est "
-"pourquoi le minimum possible de « daemons » doivent être démarrés dans ce "
-"niveau de sécurité.\n"
-"\n"
-"Voulez-vous réellement installer un système d'impression ?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Activation du système d'impression au démarrage"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Le système d'impression (%s) ne sera pas activé automatiquement lors du "
-"démarrage de la machine.\n"
-"\n"
-"Il est possible que l'activation automatique ait été supprimée par "
-"l'utilisation d'un plus grand niveau de sécurité, car les systèmes "
-"d'impression sont des cibles potentielles d'attaque.\n"
-"\n"
-"Voulez-vous rétablir l'activation automatique du système d'impression ?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Vérification du logiciel installé..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Suppression de LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Suppression de LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Choisissez le gestionnaire d'impression"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quel système d'impression désirez-vous utiliser ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configuration de l'imprimante « %s »..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installation de Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Options de l'imprimante"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Préparation de PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Configuration des applications...."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Désirez-vous configurer l'impression ?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Système d'impression : "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Les imprimantes suivantes sont configurées. Double-cliquez sur l'une d'entre "
-"elles pour modifier ses paramètres, en faire l'imprimante par défaut, "
-"consulter les informations à son propos ou pour rendre une imprimante d'un "
-"serveur CUPS distant utilisable par Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Les imprimantes suivantes sont configurées. Cliquez sur l'une d'entre elles "
-"pour modifier ses paramètres, en faire l'imprimante par défaut ou consulter "
-"les informations à son propos."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Rafraîchir la liste des imprimantes (pour afficher toutes les imprimantes "
-"CUPS distantes)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Changer le système d'impression"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Désirez-vous configurer une autre imprimante ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modifier la configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Imprimante %s\n"
-"Que souhaitez-vous modifier sur cette imprimante ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Faire"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Type de connexion"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nom, description, emplacement"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Marque, modèle, pilote"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Marque, modèle"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Choisir comme imprimante par défaut"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Ajouter cette imprimante à StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Retirer cette imprimante de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Imprimer des pages de test"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Savoir comment utiliser cette imprimante"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Désinstaller l'imprimante"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Désinstallation de l'ancienne imprimante « %s »..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Imprimante par défaut"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "L'imprimante « %s » est maintenant celle par défaut."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Ajout de l'imprimante à StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "L'imprimante « %s » a été ajoutée avec succès à StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Impossible d'ajouter l'imprimante « %s » à StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Retrait de l'imprimante de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "L'imprimante « %s » a été retirée avec succès de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Impossible de retirer l'imprimante « %s » de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Désirez-vous vraiment désinstaller l'imprimante « %s »?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Suppression de l'imprimante « %s »..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuration des serveurs mandataires (proxy)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bienvenue dans la configuration du serveur mandataire (proxy).\n"
-"\n"
-"Vous allez pouvoir configurer ici vos serveurs mandataires http et ftp\n"
-"avec ou sans identifiant et mot de passe\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Veuillez entrer les informations concernant le mandataire http\n"
-"ou laissez-les vide si vous ne voulez pas de ce mandataire"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "L'URL doit commencer par 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Le numéro de port doit être numérique"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Veuillez entrer les informations concernant le mandataire ftp\n"
-"ou laissez-les vide si vous ne voulez pas de ce mandataire"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "L'URL doit commencer par 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Veuillez entrer l'identifiant et le mot de passe pour le mandataire,\n"
-"si nécessaire.\n"
-"Laissez-les vides si vous n'en voulez pas"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "identifiant"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Mot de passe"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Ré-entrer le mot de passe"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Les mots de passe ne correspondent pas. Réessayez !"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-"Impossible d'ajouter une partition au RAID md%d car\n"
-"celui-ci est déjà formaté"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Impossible d'écrire le fichier %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "« mkraid » a échoué"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "« mkraid » a échoué (les « raidtools » sont-ils installés ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Trop peu de partitions pour du RAID de niveau %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Démarrage ou arrêt du système sonore ALSA (Advanced Linux Sound "
-"Architecture) Il charge le pilote pour votre carte son, et restaure les "
-"réglages du périphérique de mixage."
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron exécute des tâches périodiques avec une précision exprimée en jours. "
-"Les tâches sont exécutées automatiquement au redémarrage de la machine si "
-"elles ont expirés leur délai. Quelques tâches de maintenance quotidiennes et "
-"hebdomadaires sont préconfigurées pour le système Mandrake.(Plus d'infos "
-"dans « man anacron »)"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd surveille l'état de la batterie d'un portable, et en garde une trace "
-"(via syslog). Il peut être utilisé pour arrêter proprement la machine "
-"lorsque la batterie est très faible et après avoir averti les utilisateurs."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Service qui permet de démarrer une tâche à une heure précise. Chaque tâche "
-"doit être créée par la commande « at », puis, a l'heure dite, le service "
-"« atd » lance cette tâche. Par exemple pour éteindre automatiquement la "
-"machine ce soir à 23h59, tapez « at 23:59 » dans une fenêtre de commande, "
-"puis « halt » et <Ctrl-D>."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron est un planificateur de tâches. Contrairement à Anacron, les tâches "
-"sont exécutées à des moments précis, pendant lesquels la machine doit être "
-"allumée. « Vixie cron » ajoute des fonctionnalités au « cron » UNIX de base "
-"(notamment une meilleure sécurité et des options de configuration plus "
-"complètes)."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM permet d'utiliser la souris dans des applications fonctionnant en mode "
-"texte dans la console (comme par exemple Midnight Commander) . Il permet "
-"également d'utiliser le copier-coller et inclut le support des menus "
-"contextuels sur la console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake effectue une détection matérielle, et configure éventuellement le "
-"nouveau matériel."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache est un serveur web (HTTP). Il est utilisé pour faire fonctionner un "
-"site internet."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Le métaserveur « inetd » sert à démarrer automatiquement les autres serveurs "
-"réseau lorsqu'une requête est détectée. Il est notamment responsable du "
-"démarrage des serveurs telnet, ftp, rsh et rlogin, etc. Le désactiver "
-"revient à désactiver tous les services qu'il gère."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Démarre le filtrage des paquets réseau pour la série 2.2 des noyaux Linux, "
-"afin de mettre en place un pare-feu (firewall) pour protéger votre machine "
-"des attaques réseau. "
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ce paquetage active la disposition de clavier défini dans le fichier /etc/"
-"sysconfig/keyboard. Cette disposition peut être modifiée en utilisant "
-"l'outil kbdconfig. Ce service devrait être activé sur la plupart des "
-"machines."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Régénération automatique des fichiers d'en-têtes pour le noyau\n"
-"dans le dossier /boot pour /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Détection automatique et configuration du matériel au démarrage."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf effectue certaines tâches au démarrage afin de maintenir la "
-"configuration du système."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd est le serveur d'impression nécessaire au bon fonctionnement de la "
-"commande  lpr. Il permet gérer les files d'attente et les demandes "
-"d'impression."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Activation / désactivation du Linux Virtual Server, qui est un service "
-"utilisé pour créer un serveur virtuel haute-performance et haute "
-"disponibilité, composé d'un ensemble de serveur linux reliés entre eux."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Named (BIND) est un Serveur de Noms de Domaine (DNS) qui est utilisé pour "
-"convertir les adresses internet en adresses IP. (Il est principalement mis "
-"en place par les fournisseur d'accès)"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Effectue la connexion ou la déconnexion (montage et démontage) vers les "
-"systèmes de fichiers distants ou répertoires partagés de type NFS (Unix), "
-"SMB (Windows), et NCP (Netware) que vous avez configurés. (Pour NFS et SMB, "
-"voir le « Centre de contrôle Mandrake »,  dans la section « matériel / "
-"points de montage »)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Gestion groupée de toutes les connexions réseau que vous avez configurées et "
-"que vous avez choisi d'activer dès le démarrage du système.  (par ex. vos "
-"connexions pour le réseau local et l'ADSL ou le Cable). Vous pouvez accéder "
-"séparément à vos interfaces réseau grâce au « Centre de  Contrôle Mandrake » "
-"dans la section « Internet et réseau »."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Démarrage ou arrêt du serveur NFS. Un serveur NFS permet d'effectuer un "
-"partage de fichiers en ouvrant l'accès à certains dossiers depuis un réseau. "
-"Les dossiers partagés sont listés dans le fichier /etc/exports, mais vous "
-"pouvez  l'éditer grâce à « linuxconf » dans la section « réseau / serveur »."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Ce service permet le démarrage des fonctionnalités de verrouillage des "
-"fichiers pour NFS, lorsque le noyau ne les a pas démarrées lui-même. Cela "
-"dit les noyaux récents n'en ont pas besoin. Cependant, le service statd est "
-"aussi démarré et sert à avertir les clients distants de l'arrêt du serveur "
-"NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activation de la touche « Verr Num » du pavé numérique du clavier au "
-"démarrage."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Support des imprimantes winprinter OKI 4w et compatibles."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA permet d'utiliser des périphériques PCCARD comme des cartes Ethernet "
-"ou des modems avec des ordinateurs portables. Ce service ne sera pas démarré "
-"à moins qu'il soit correctement configuré. Il peut donc être activé sans "
-"danger sur des machines ne possédant pas ce type de périphériques."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Le portmapper gère les connexions RPC qui sont utilisées par des serveurs "
-"comme NFS et NIS. Le serveur portmap doit être activé sur des machines "
-"jouant le rôle de serveur pour des protocoles utilisant le mécanisme RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix est un agent de transport du courrier (Mail Transport Agent - MTA) "
-"permettant l'échange de courriers électroniques entre machines."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sauvegarde et restaure l'entropie du système pour une meilleure génération "
-"de nombres aléatoires. (utile par exemple pour la création de clefs de "
-"cryptographie)"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Permet de faire apparaître des périphériques de type bloc (par ex. "
-"partitions de disque dur)  comme des périphériques bruts à accès direct (raw "
-"devices). Les correspondances sont  établies dans le fichier /etc/sysconfig/"
-"rawdevices, et c'est la commande « raw » qui est utilisée. Cela peut être "
-"utilisé par des bases de données comme Oracle."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Le service routed permet la mise à jour automatique des tables de routage IP "
-"grâce au protocole RIP. Bien que RIP soit très utilisé sur les petits "
-"réseaux, des protocoles de routage plus complets sont nécessaires pour les "
-"réseaux de plus grande taille. "
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Le protocole rstat permet aux utilisateurs sur un même réseau d'obtenir des "
-"mesures de la performance de n'importe quelle machine sur ce réseau."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Le protocole rusers permet aux utilisateurs de connaître tous les "
-"utilisateurs connectés aux machines supportant ce protocole."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Le protocole rwho permet aux utilisateurs distants d'obtenir une liste des "
-"utilisateurs connectés à une machine qui fait tourner le démon rwho "
-"(similaire à finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Démarrer le système de gestion du son sur votre machine."
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog est un service utilisé par beaucoup d'autres services pour "
-"enregistrer des rapports d'activité. C'est une très bonne idée de toujours "
-"l'activer."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Charger les pilotes pour vos périphériques usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Démarre le serveur de polices de caractères, obligatoire pour le  "
-"fonctionnement de l'interface graphique (XFree)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Choisissez les services à démarrer automatiquement lors du démarrage du "
-"système"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Impression"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Partage de fichiers"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Système"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Administration à distance"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Serveur de base de données"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Services : %d activés sur %d enregistrés"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Services"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "actif"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "arrêté"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serveurs et services"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Pas d'autre information au sujet de ce service, désolé."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Au démarrage"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Démarrer"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Arrêter"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Merci d'avoir choisi Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Bienvenue dans le monde  Open Source"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Le principe du logiciel libre est à l'origine de MandrakeSoft et de son "
-"succès. Ce système d'exploitation est le fruit du travail collaboratif et "
-"ouvert de la communauté Linux. Ses contributeurs passionnés sont répartis "
-"dans le monde entier."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Rejoignez le monde du logiciel libre !"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Pour mieux connaître la communauté Open Source et y contribuer, apprendre, "
-"partager vos connaissances, aider les autres membres et participer au "
-"développement d'outils, vous pouvez accéder aux nombreux forums de "
-"discussions sur nos pages « Communauté »."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet et Messagerie"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vous fournit les meilleures applications pour accéder au "
-"meilleur de l'Internet: parcourir le web, visualiser des animations via "
-"Mozilla ou Konqueror,  échanger des e-mails et gérer vos informations "
-"personnelles avec Evolution ou Kmail, et bien plus."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimédia et Graphisme"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Grâce à Mandrake Linux 8.2, profitez au maximum des capacités multimédia de "
-"votre ordinateur. Utilisez les plus récentes applications pour gérer vos "
-"fichiers audio et vidéo, éditer vos images ou collections de photos et "
-"regarder la télévision et vos vidéos, et bien plus."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Développement"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 est la plate-forme de choix pour le développement. "
-"Découvrez la puissance du compilateur GNU gcc ainsi que les meilleurs "
-"environnements Open Source."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Control Center"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Le Centre de Contrôle Mandrake de Mandrake Linux 8.2 vous permet de "
-"configurer entièrement vos matériels et administrer votre machine depuis la "
-"même application."
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Interfaces utilisateur"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 fournit 11 environnements graphiques et gestionnaires de "
-"fenêtres différents : GNOME 1.4, KDE 2.2.2, Window Maker 0.8, ..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Logiciels Serveurs"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"En quelques clics, transformer votre ordinateur en un puissant serveur : "
-"Serveur Web, e-Mail, Pare-Feu, Routeur, Partage de Fichiers et "
-"d'Imprimantes..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jeux"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 vous fournit les meilleurs Jeux Open Source en arcade, "
-"action, sport, réflexion, stratégie, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Voulez-vous apprendre au sujet de Linux de manière simple, rapide et "
-"gratuite ? MandrakeCampus fournit un service d'apprentissage en ligne "
-"gratuit et Open Source, ainsi que des tests pour mesurer vos progrès, sur "
-"MandrakeCampus -- votre centre d'apprentissage en ligne."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Bénéficiez de l'aide de la communauté et de MandrakeSoft pour obtenir un "
-"support de qualité. En tant qu'expert, vous pourrez partagez vos "
-"connaissances et proposer du support à d'autres utilisateurs sur :"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Parce que chaque projet soulève une problématique particulière, nos "
-"consultants sont à vos cotés pour vous aider à trouver les réponses. "
-"MandrakeSoft vous apporte une véritable alternative informatique issue de "
-"son expérience d'éditeur."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"L'ensemble de nos solutions Linux, de nos offres exclusives sur nos produits "
-"et goodies sont disponibles via notre site de vente en ligne"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Pour plus d'informations sur les services professionnels et les offres "
-"commerciales de MandrakeSoft, veuillez consulter la page web suivante :"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installation des paquetages..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"La table des partitions ne peut être lue car elle semble endommagée.\n"
-"Une réinitialisation des partitions endommagées va être tentée."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Erreur !"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Impossible de trouver le fichier image « %s »."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configurateur d'installation automatisée"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Vous êtes sur le point de configurer une disquette d'auto-installation. "
-"Cette fonctionnalité est relativement dangereuse, et doit donc être utilisée "
-"avec précaution.\n"
-"\n"
-"La disquette d'auto-installation vous permettra d'installer un autre "
-"ordinateur avec exactement la même configuration que le vôtre. Mais parmi "
-"l'ensemble des étapes d'installation, vous pouvez choisir lesquelles seront "
-"complètement  automatisées et lesquelles seront manuelles.\n"
-"Pour une sûreté maximale, les étapes de partitionnement et de formatage ne "
-"seront jamais faites automatiquement, quels que soient les choix que vous "
-"aviez fait lors de la première installation de cet ordinateur.\n"
-"\n"
-"Souhaitez-vous continuer ?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configuration des étapes automatiques"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Veuillez choisir, pour chaque étape, si celle-ci doit être rejouée comme "
-"pendant votre installation, ou si elle doit s'effectuer manuellement."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Bienvenue.\n"
-"\n"
-"Les paramètres de l'installation automatique sont disponibles dans les "
-"sections sur la gauche."
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Félicitations !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"La disquette a été générée avec succès.\n"
-"Vous pouvez maintenant rejouer votre installation."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Installation automatique"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Ajouter un élément"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Supprimer le dernier élément"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      Rapport de sauvegarde (DrakBackup) \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      Rapport de sauvegarde périodique (DrakBackup)\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    Détails du rapport de sauvegarde\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "TOTAL :"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sauvegarde des fichiers systèmes..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Sauvegarde sur disque dur..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Sauvegarde des comptes utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Sauvegarde sur disque dur..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Sauvegarde des autres fichiers..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"liste envoyée par FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problème de connection FTP: impossible d'envoyer les sauvegardes par "
-"FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Erreur lors de l'envoi du mail?\n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Sélection de fichiers ou dossiers"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Sélectionnez les fichiers ou dossiers puis cliquez sur « Ajouter »"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Veuillez cocher toutes les options dont vous avez besoin.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ces options peuvent sauvegarder et restaurer\n"
-"tous les fichiers du dossier de configuration système « /etc »\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sauvegarder le dossier de configuration système (dossier /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Sauvegardes incrémentales (économie d'espace)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ne pas inclure les fichiers critiques (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Note : la sauvegarde incrémentale n'écrase pas les anciennes sauvegardes."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Veuillez cocher tous les comptes utilisateurs à sauvegarder"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ne pas inclure le cache du navigateur internet (fichiers tampon)"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Sauvegardes incrémentales (économie d'espace)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Supprimer sélection"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Sauvegarder par FTP"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Nom d'hôte ou adresse IP de la machine de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr "Dossier où poser la sauvegarde sur cette machine"
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Nom de connexion sur cette machine"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Veuillez entrer votre mot de passe"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Se souvenir du mot de passe"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "par connexion FTP..."
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "par connexion sécurisée..."
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Sauvegarder sur CDR (ou DVDR)"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Veuillez choisir la taille de votre CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "CD Réinscriptible"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Effacer le CDRW avant sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Veuillez vérifier que vous voulez inclure\n"
-"le lanceur de l'installation sur votre CD"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Veuillez entrer l'emplacement de votre graveur (bus,id,lun)\n"
-"(détecter avec « cdrecord -scanbus ». Par exemple : 0,1,0 )"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Sauvegarde sur cartouche"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Nom de périphérique du matériel de sauvegarde (/dev/...?)"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr "Taille maximale de sauvegarde :"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Dossier où poser la sauvegarde :"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Limiter la taille de la sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "par transfert réseau..."
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Dans un dossier (local ou partagé)..."
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "toutes les heures"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "tous les jours"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "toutes les semaines"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "tous les mois"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Sauvegarde périodique"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Veuillez choisir l'intervalle de temps entre les sauvegardes"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Quelle sauvegarde sera périodique ?"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "celle sur Disque dur / NFS"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "celle par FTP"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"ATTENTION : Le « cron » doit être actif dans vos services. (voir le « Centre "
-"de Contrôle Mandrake » section « système / services »)"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Envoyer un rapport par mail après chaque sauvegarde à :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Quoi..."
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Où..."
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Quand..."
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Plus d'options..."
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Configuration de sauvegarde Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Veuillez choisir où stocker la sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "sur disque dur"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "par réseau"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Veuillez choisir ce que vous voulez sauvegarder"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sauvegarder le système"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Sauvegarder les comptes utilisateurs"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Sélectionner individuellement les utilisateurs"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sources de sauvegarde : \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Fichiers système:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Données des utilisateurs :\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Autres fichiers ou dossiers :\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Sauvegarde sur le disque dur dans le dossier : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Sauvegarde par FTP sur la machine : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nom de connexion : %s\n"
-"\t\t dans le dossier : %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Options:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tFichiers systèmes non inclus\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tLe sauvegarde utilise « tar » et « bzip2 »\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tLa sauvegarde utilise « tar » et « gzip »\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Le Démon (%s) comprend :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-celle sur Disque dur.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-celle sur CDR.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-celle par transfert FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-celle par transfert SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"La configuration de sauvegarde n'est pas encore définie. \n"
-"Veuillez cliquer sur « Configuration par assistant », ou « Configuration "
-"manuelle »\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste de données à restaurer :\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste des données corrompues :\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Veuillez le décocher ou le retirer la prochaine fois"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Les fichiers de sauvegarde sont corrompus"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "    Toutes vos données sélectionnées ont été          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-"    correctement restaurées en prenant « %s » comme dossier racine      "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Restauration de la configuration       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK pour restaurer les autres fichiers."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Fichiers de sauvegarde à restaurer (seul le plus récent compte)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Sauvegarder les fichiers système avant :"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Veuillez choisir la date à restaurer"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Sauvegarde sur disque dur"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Restaurer à partir d'un dossier"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Veuillez entrer le dossier où résident les sauvegardes"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Choisir un autre support de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Autre support"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Restaurer le système"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Restaurer les comptes utilisateurs"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Restaurer les autres fichiers ou dossiers"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Choisir un autre dossier racine de restauration ( au lieu de / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Nouvelle sauvegarde avant restauration (seulement pour l'incrémental)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Retirer les dossiers personnels ds utilisateurs avant restauration"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Restaurer toutes les sauvegardes..."
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Restauration personnalisée..."
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Aide"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "<- Précédent"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Valider"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Sauvegarder !"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurer !"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Suivant ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Merci de vouloir faire une sauvegarde avant de vouloir restaurer... (ou bien "
-"vérifiez que votre dossier de sauvegarde est correct)"
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Impossible d'envoyer un mail\n"
-"  Votre rapport n'a pas été envoyé\n"
-"   Veuillez configurer « sendmail »"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Liste des paquetages à installer"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Erreur pendant l'envoi par FTP.\n"
-"  Veuillez corriger votre configuration FTP"
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Veuillez choisir les données à restaurer..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Veuillez choisir le support de sauvegarde..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Veuillez choisir les données à sauvegarder..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"La configuration de sauvegarde n'est pas encore définie. \n"
-"Veuillez cliquer sur « Configuration par assistant », ou « Configuration "
-"manuelle »"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "En développement ... veuillez patienter."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Sauvegarde des fichiers systèmes..."
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Sauvegarde des comptes utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Sauvegarde des autres fichiers ou dossiers..."
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "TOTAL :"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Envoi par FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Envoi des fichiers..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Liste à include sur le CDR"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Veuillez taper la vitesse de gravure :"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-"Veuillez entrer l'emplacement de votre graveur (bus,id,lun)\n"
-"(détecter avec « cdrecord -scanbus ». Par exemple : 0,1,0 )"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Veuillez vérifier si vous voulez Inclure l'install boot sur le CD"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Sauvegarder à partir de la configuration définie"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Voir la configuration de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configuration par assistant"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Configuration manuelle"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Sauvegarder !"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"description des options :\n"
-"\n"
-" À cette étape, Drakbackup vous permet de changer :\n"
-"\n"
-" - Le mode de compression :\n"
-"    \n"
-"      Si vous cochez la compression bzip2, vous compresserez\n"
-"      mieux qu'avec gzip (de 2 à 10 %).\n"
-"      Cette option n'est pas choisie par défaut\n"
-"      parce qu'elle est beaucoup plus lente.\n"
-" \n"
-" - Le mode de mise-à-jour:\n"
-"\n"
-"      Cette option mets à jour votre sauvegarde, mais\n"
-"      n'est pas vraiment utile car vous devez la\n"
-"      décompresser avant de la mettre à jour.\n"
-"      \n"
-" - le mode .backupignore :\n"
-"\n"
-"      Comme avec CVS, Drakbackup va ignorer les références\n"
-"      incluses dans les fichiers .backupignore de chaque dossier.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Certaines erreurs lors de l'envoi de mails peuvent être causées par\n"
-" une mauvaise configuration de postfix. Pour le résoudre, vous devez\n"
-" configurer le nom de machine ou de domaine dans /etc/postfix/main.cf.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"description des options :\n"
-"\n"
-" - Sauvegarde des fichiers systèmes :\n"
-"       \n"
-"\tCette option vous permet de sauvegarder votre dossier /etc,\n"
-"\tqui contient tous les fichiers de configuration. Faites attention\n"
-"\tpendant la restauration de ne pas écraser :\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Sauvegarde des comptes utilisateurs :\n"
-"\n"
-"\tCette option vous permet de choisir les utilisateurs \n"
-"\tà sauvegarder.\n"
-"\tPour préserver l'espace disque, il est recommandé\n"
-"\tde ne pas inclure les dossier « cache » des navigateurs.\n"
-"\n"
-" - Sauvegarde des autres fichiers : \n"
-"\n"
-"\tCette option vous permet d'ajouter d'autres données\n"
-"\tà sauvegarder. Pour l'instant il n'est pas possible de faire\n"
-"\tune sauvegarde incrémentale avec cette option.\t\t\n"
-" \n"
-" - Sauvegardes incrémentales:\n"
-"\n"
-"\tLa sauvegarde incrémentale est l'option la \n"
-"\tplus puissante pour la sauvegarde. Elle vous permet \n"
-"\tde tout sauver la première fois, puis seulement les \n"
-"\tchangements les fois suivantes.\n"
-"\tAinsi vous serez capable de restaurer les données\n"
-"\tcorrespondant à n'importe quelle sauvegarde précédente.\n"
-"\t\n"
-"\tSi vous n'avez pas sélectionné cette option, toutes\n"
-"\tvos sauvegardes précédentes sont préalablement éffacées.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"description de la restauration :\n"
-" \n"
-"Seule la date de sauvegarde choisie la plus récente sera utilisée, car avec\n"
-"le mode incrémental, toutes les sauvegardes précédentes doivent être "
-"restaurées.\n"
-"\n"
-"Donc si vous ne voulez pas restaurer un utilisateur, décochez toutes ses "
-"cases\n"
-"\n"
-"Sinon, vous ne pouvez en choisir qu'une\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft par DUPONT Sébastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Ce programme est un logiciel libre : vous pouvez le redistribuer\n"
-"et/ou le modifier selon les termes de la « GNU General Public\n"
-"License », tels que publiés par la « Free Software Foundation »; soit\n"
-"la version 2 de cette licence ou (à votre choix) toute version\n"
-"ultérieure.\n"
-"\n"
-"Ce programme est distribué dans l'espoir qu'il sera utile, mais\n"
-"SANS AUCUNE GARANTIE, ni explicite ni implicite; sans même les\n"
-"garanties de commercialisation ou d'adaptation dans un but spécifique.\n"
-"Se référer à la « GNU General Public License » pour plus de détails.\n"
-"\n"
-"Vous devriez avoir reçu une copie de la « GNU General Public License »\n"
-"en même temps que ce programme; sinon, écrivez à la « Free Software\n"
-"Foundation », Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-"  Drakbackup sert à sauvegarder votre système.\n"
-"  Pendant sa configuration vous pouvez sélectionner: \n"
-"\t- des fichiers systèmes, \n"
-"\t- des comptes utilisateur, \n"
-"\t- d'autres données.\n"
-"\tou Tout votre système ...  et d'autres (comme des partitions Windows)\n"
-"\n"
-"  Drakbackup vous permet de faire des sauvegarde sur:\n"
-"\t- Disque dur.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (avec autoboot, récupération and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cartouche.\n"
-"\n"
-"  Drakbackup peut restaurer votre système vers un dossier choisi\n"
-"\n"
-"  Par défaut toute sauvegarde sera stockée dans le\n"
-"  dossier /var/lib/drakbackup\n"
-"\n"
-"  Fichier de configuration :\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Étape de restauration :\n"
-"  \n"
-"  Pendant l'étape de restauration, DrakBackup va retirer \n"
-"  votre dossier d'origine et vérifier que tous les \n"
-"  fichiers de sauvegarde ne sont pas corrompus. Il est recommandé \n"
-"  de faire une dernière sauvegarde avant restauration.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"description des options :\n"
-"\n"
-"Attention en utilisant la sauvegarde par FTP, car seulement \n"
-"les sauvegardes déjà construites sont envoyées vers le serveur.\n"
-"Ainsi, pour le moment, vous devez faire une sauvegarde sur disque dur\n"
-"avant de l'envoyer vers le serveur.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problèmes de restauration :\n"
-"\n"
-"Avant l'étape de restauration, Drakbackup va vérifier tous vos\n"
-"fichiers de sauvegarde. Les dossiers originaux seront effacés\n"
-"et vous allez perdre toutes vos données. Il est important de \n"
-"faire les choses avec précaution et de ne pas modifier à la main\n"
-"les fichiers de sauvegarde.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-"  Drakbackup sert à sauvegarder votre système.\n"
-"  Pendant sa configuration vous pouvez sélectionner: \n"
-"\t- des fichiers systèmes, \n"
-"\t- des comptes utilisateur, \n"
-"\t- d'autres données.\n"
-"\tou Tout votre système ...  et d'autres (comme des partitions Windows)\n"
-"\n"
-"  Drakbackup vous permet de faire des sauvegarde sur:\n"
-"\t- Disque dur.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (avec autoboot, récupération and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cartouche.\n"
-"\n"
-"  Drakbackup peut restaurer votre système vers un dossier choisi\n"
-"\n"
-"  Par défaut toute sauvegarde sera stockée dans le\n"
-"  dossier /var/lib/drakbackup\n"
-"\n"
-"  Fichier de configuration :\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Étape de restauration :\n"
-"  \n"
-"  Pendant l'étape de restauration, DrakBackup va retirer \n"
-"  votre dossier d'origine et vérifier que tous les \n"
-"  fichiers de sauvegarde ne sont pas corrompus. Il est recommandé \n"
-"  de faire une dernière sauvegarde avant restauration.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "L'installation de %s a échoué pour la raison suivante :"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Chercher les polices installées"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Désélectionner les polices installées"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "Parcourir toutes les polices"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "aucune fonte trouvée"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "terminé"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "impossible de trouver des polices dans vos disques"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Résélectionnez des polices correctes"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "impossible de trouver des polices.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Chercher des polices dans la liste des installées"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copie des fontes"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation de polices « True Type »"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Veuillez patienter pendant « ttmkfdir »"
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installation « True Type » terminée"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Conversion de polices"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "création de type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Inscription dans ghoscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Conversion de polices « True Type »"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Conversion de polices « pfm »"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Supprimer les fichiers temporaires"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Relancer le serveur de polices"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Supprimer les fichiers de polices"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "redémarrage du serveur de fonte"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Avant d'installer des polices de caractères, assurez-vous que vous avez\n"
-"les permissions de les utiliser et de les installer sur votre système. \n"
-"\n"
-"- Vous pouvez installer les polices par la voie habituelle. Dans de rares "
-"cas,\n"
-"des polices boguées peuvent bloquer votre serveur d'affichage XFree."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importation de polices"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Récupérer les polices de Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Désinstaller des polices"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Options avancées"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Liste des polices"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Choisissez les applications qui supporteront ces polices"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Imprimante générique"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Sélectionnez les polices ou dossiers et cliquez sur « Ajouter »"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installe la liste"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Cliquez ici si vous êtes sûr"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Ici sinon"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Désélectionne tout"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Sélectionne tout"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Désinstalle la liste"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Tests initiaux"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copier les polices sur votre système"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installe et convertit des polices"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-installation"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Retirer des polices de votre système"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-désinstallation"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Partage de la connexion internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Le partage de la connexion internet est activé"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion à l'internet a déjà été\n"
-"effectuée. Elle est actuellement activée.\n"
-"\n"
-"Que voulez-vous faire ?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "désactiver"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ne rien faire"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurer"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Désactivation des serveurs..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Le partage de la connexion à l'internet est maintenant désactivé."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Le partage de la connexion à l'internet est désactivé"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion à l'internet a déjà été\n"
-"effectuée. Elle est actuellement désactivée.\n"
-"\n"
-"Que voulez-vous faire ?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activer"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activation des serveurs..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Le partage de la connexion internet est maintenant activé."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Votre ordinateur peut être paramétré afin de partager sa connexion "
-"internet.\n"
-"Avec cette fonctionnalité, d'autres ordinateurs sur votre réseau local "
-"pourront utiliser la connexion internet de cet ordinateur.\n"
-"\n"
-"Veuillez noter que vous avez besoin d'une carte réseau dédiée à votre réseau "
-"local."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (utilisant le module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Aucune carte réseau n'est présente dans votre système"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Aucune carte réseau n'a été détectée sur votre système. Veuillez utiliser "
-"l'outil de configuration du matériel."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Carte réseau"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Une seule carte réseau est configurée sur votre système :\n"
-"\n"
-"%s\n"
-"\n"
-"Je vais configurer votre réseau local avec cette carte réseau."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Veuillez choisir quelle carte réseau sera connectée à votre réseau local"
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interface réseau déjà configurée"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Attention, la carte réseau (%s) est déjà configurée.\n"
-"\n"
-"Désirez-vous une reconfiguration automatique ?\n"
-"\n"
-"Vous pouvez le faire manuellement, mais vous devez savoir ce que vous faites."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Reconfiguration automatique"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Montrer la configuration actuelle"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Configuration actuelle de « %s » :\n"
-"\n"
-"Réseau : %s\n"
-"Adresse IP : %s\n"
-"Attribution de l'adresse : %s\n"
-"Pilote : %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Je peux conserver votre configuration actuelle, et supposer que vous avez "
-"déjà\n"
-"configuré un serveur DHCP ; dans ce cas veuillez vérifier que j'ai "
-"correctement\n"
-"lu l'adresse du réseau de Classe C que vous utilisez pour votre réseau "
-"local ;\n"
-"je ne le reconfigurerai pas et je ne toucherai pas à la configuration de "
-"votre\n"
-"serveur DHCP.\n"
-"\n"
-"Sinon, je peux reconfigurer votre interface et (re)configurer un serveur "
-"DHCP.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Réseau Local de class C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Adresse IP du serveur DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Re-configurer l'interface et le serveur DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Le réseau local ne finissait pas par `.0', j'abandonne."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Conflit potentiel d'adresses du réseau local trouvé dans la configuration de "
-"%s !\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Configuration du Firewall détectée"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Attention ! Une configuration existante du Firewall a été détectée. Vous "
-"devrez peut-être modifier la configuration manuellement après l'installation."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configuration en cours..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configuration des scripts, installation des logiciels, démarrage des "
-"serveurs..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Des problèmes sont apparus en installant le paquetage %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tout a été configuré.\n"
-"Vous pouvez maintenant partager votre connexion internet avec d'autres "
-"ordinateurs sur votre réseau local, en utilisant la configuration réseau "
-"automatique (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"La configuration a déjà été effectuée, mais elle est actuellement désactivée."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La configuration a déjà été effectuée, et elle est actuellement activée."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Le partage de la connexion internet n'a encore jamais été configuré."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuration du partage de la connexion internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bienvenue dans l'utilitaire de partage de connexion internet !\n"
-"\n"
-"%s\n"
-"\n"
-"Cliquez sur Configurer pour lancer l'assistant de configuration."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuration du réseau (%d cartes réseaux)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil : "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Effacer le profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil à effacer :"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nouveau profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nom du profil à créer (le nouveau profil est créé comme une copie du profil "
-"courant :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nom de machine : "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Accès internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Type :"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Passerelle :"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface :"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "État :"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Veuillez patienter"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurer l'accès à l'internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuration LAN (réseau local)"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Pilote"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocole"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "État"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurer le réseau local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Cliquez ici pour lancer l'assistant ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistant..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Appliquer"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Veuillez patienter... mise en place de la configuration"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Connecté"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Non connecté"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Se connecter..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Se déconnecter..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Attention, une autre connexion internet a été détectée, peut-être utilisant "
-"votre réseau"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune interface réseau configurée.\n"
-"Vous pouvez en configurer une en cliquant sur « Configurer »"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuration du LAN (réseau local)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Carte réseau %s : %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocole d'amorçage"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Lancer au démarrage"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "activer maintenant"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "désactiver maintenant"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Cette interface n'a pas encore été configurée.\n"
-"Lancez l'assistant de configuration dans la fenêtre principale"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune connection internet.\n"
-"Vous pouvez en créer une en cliquant sur « Configurer »"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuration de la connexion internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuration de la connexion internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Type de connexion : "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Paramètres"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Passerelle"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Carte ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Mise en place du niveau de sécurité"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centre de contrôle"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Choisissez l'outil que vous voulez utiliser"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (hertzien)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable ou HRC)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Chine (hertzien)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japon (hertzien)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japon (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europe de l'est"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlande"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europe de l'ouest"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nouvelle Zélande"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Afrique du Sud"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentine"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"SVP,\n"
-"Veuillez choisir votre région et votre norme de TV"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norme TV :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Zone :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Recherche des canaux de télévision en cours ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Recherche des canaux de télévision"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Aucune carte TV détectée !"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Aucune carte TV n'a été détectée sur votre ordinateur. Veuillez vérifier qu'une carte TV/Vidéo supportée par Linux est correctement branchée.\n"
-"\n"
-"\n"
-"Vous pouvez visiter notre base de données de support matériel à :\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "utilisation : keyboarddrake [--expert] [clavier]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Veuillez choisir votre type de clavier."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voulez-vous que la touche BackSpace retourne Delete en console ?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Changer de cédérom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Changement de cédérom\n"
-"\n"
-"Veuillez insérer le cédérom d'Installation dans votre lecteur.\n"
-"Ceci fait, cliquez sur « OK ».\n"
-"\n"
-"Si vous ne le possédez pas, cliquez sur « Annuler » pour annuler la mise à "
-"jour."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Impossible de démarrer la mise à jour !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Les changements ont été effectués mais ne seront effectifs qu'après votre "
-"déconnection"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "N'afficher que les pour les jours sélectionnés"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fichier/_Nouveau"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fichier/_Ouvrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fichier/_Enregistrer"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fichier/Enregistrer _Sous"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fichier/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Options"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Options/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Aide"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Aide/_A propos..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Utilisateur"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messages"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Explications sur les Outils Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "chercher"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Un outil pour voir vos fichiers journaux"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Paramètres"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "contenant"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mais ne contenant pas"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Choisir le fichier"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendrier"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contenu du fichier"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Alerte mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "s'il vous plaît attendez, examen du fichier : %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configuration des alertes mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bienvenue dans l'utilitaire de configuration mail/SMS.\n"
-"\n"
-"Vous allez pouvoir configurer ici vos les alertes systèmes.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "configuration des services"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Vous recevrez une alerte si l'un des services sélectionnés ne tourne plus"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "chargement des paramètres"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Vous recevrez une alerte si la charge machine dépasse cette valeur"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configuration des alertes"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configurer les moyens de vous alerter"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Enregistrer sous..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Veuillez choisir le type de votre souris."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "aucun périphérique USB série trouvé\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Émuler le troisième bouton ?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s trouvé sur %s, configurer ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Sélectionnez un scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ce scanner %s n'est pas supporté"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake n'a pas réussi à détecter votre scanner %s.\n"
-"Veuillez sélectionner le périphérique sur lequel votre scanner est branché"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "choisissez le périphérique"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Ce scanner (%s) doit être configurée par printerdrake.\n"
-"Vous pouvez lancer printerdrake depuis le Centre de Contrôle Mandrake dans "
-"la section Matériel"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Votre scanner %s a été configuré.\n"
-"Vous pouvez maintenant scanner des documents en utilisant « XSane » à partir de Multimédia/Graphisme dans le menu des applications."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuration du Firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuration du Firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall (pare-feu)\n"
-"\n"
-"Vous avez déjà configuré un firewall.\n"
-"Cliquez sur « Configurer » pour changer ou supprimer le firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Pare-feu (Firewall)\n"
-"\n"
-"Cliquez sur Configurer pour mettre en place un pare-feu standard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Choix de la langue"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Classe d'installation"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Détection des disques durs"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configuration de la souris"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Choix du clavier"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sécurité"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Systèmes de fichiers"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatage des partitions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Choix des paquetages"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installation du système"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ajout des utilisateurs"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configuration du réseau"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configuration des services"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Programme d'amorçage"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Disquette d'amorçage"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configuration de X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Mise-à-jour système"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Fin de l'installation"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuration d'un mini-firewall\n"
-"\n"
-"Cela configure un firewall (pare-feu) personnel pour votre machine Mandrake "
-"Linux.\n"
-"Si vous souhaitez un firewall plus puissant ou dédié, veuillez plutôt "
-"utiliser\n"
-"la distribution spécialisée « MandrakeSecurity »."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nous allons maintenant vous poser des questions sur quels services vous\n"
-"souhaitez pouvoir connecter à l'internet. Veuillez réfléchir avec soin sur\n"
-"chacune de ces questions, car la sécurité de votre ordinateur est\n"
-"importante.\n"
-"\n"
-"S'il vous plaît, si vous n'utilisez par l'un de ces services,\n"
-"désactivez-le. Vous pouvez changer cette configuration n'importe quand, en\n"
-"redémarrant cette application !"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur web sur cette machine, que vous avez besoin de\n"
-"rendre visible depuis tout l'internet ? Si vous utilisez un serveur web\n"
-"pour seulement cette machine, vous pouvez répondre NON ici.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur de nom sur cette machine ? Si vous n'avez pas\n"
-"configuré un tel serveur pour donner des informations d'IP et de zone\n"
-"pour tout l'internet, veuillez répondre NON.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voulez-vous permettre les connexions sécurisées entrantes (par le\n"
-"protocole ssh) ? C'est un remplacement de telnet que vous pouvez utiliser\n"
-"pour vous connecter sur une machine distante. Si vous utilisez telnet en\n"
-"ce moment, vous devriez vraiment passer à ssh. telnet n'est pas encrypté\n"
-"-- par exemple des pirates peuvent voler votre mot de passe. ssh est\n"
-"encrypté et interdit les écoutes clandestines (eavesdropping)."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voulez-vous permettre les connexions entrantes en telnet ?\n"
-"C'est très dangereux, comme nous l'avons expliqué dans l'écran précédent.\n"
-"Nous recommandons fortement de répondre NON ici et d'utiliser ssh à\n"
-"la place de telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Utilisez-vous un serveur FTP, que vous voulez visible depuis l'internet ?\n"
-"Si c'est le cas, nous recommandons fortement de ne l'utiliser que\n"
-"pour les transferts en mode anonyme. Tous les mots de passe envoyés\n"
-"par FTP peuvent être volés par des pirates, car FTP n'utilise pas\n"
-"non plus d'encryption pour transférer les mots de passe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur de mail (courrier électronique) ? Si vous\n"
-"envoyez des messages avec pine, mutt ou d'autres clients mail texte,\n"
-"vous en utilisez probablement un. Sinon, vous devriez répondre NON.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur POP ou IMAP ? C'est utilisé pour\n"
-"héberger des comptes mail qui ne sont pas basés sur des interfaces\n"
-"web.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Vous utilisez un noyau en version 2.2. Si votre adresse IP réseau est\n"
-"attribuée automatiquement par un ordinateur sur votre réseau (adresse\n"
-"dynamique), nous avons besoin d'autoriser cela. Est-ce le cas ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Est-ce que l'heure de votre ordinateur est synchronisée avec un\n"
-"autre ordinateur ? La plupart du temps, c'est utilisé par des\n"
-"sociétés de taille moyenne ou grande, basées sur Unix/Linux,\n"
-"pour synchroniser les heures de connexion, etc. Si vous ne\n"
-"faites pas partie d'une telle société et n'avez pas entendu\n"
-"parler de ce problème, vous n'avez probablement pas besoin\n"
-"de ce service."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"La configuration est terminée. Devons nous écrire ces changements sur "
-"disque ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Échec de l'ouverture de %s : %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Échec de l'ouverture de %s en écriture : %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Non, je n'ai pas besoin de DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Oui, j'ai besoin de DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Non, je n'ai pas besoin de NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Oui, j'ai besoin de NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Ne pas sauver"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Sauver et Quitter"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Assisatant de Configuration du Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Non (en bloquer l'accès depuis le réseau)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Oui (autoriser ceci à traverser le firewall)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Veuillez patientez... Vérification des paquetages installés"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Échec lors de l'installation des paquetages nécessaires : %s et Bastille.\n"
-"Essayez de les installer manuellement."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordinateur réseau (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Serveur NFS, serveur SMB, serveur Proxy (mandataire), serveur SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Bureautique"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Station de travail Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Outils pour votre Palm Pilot ou votre Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Station de travail"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Routeur"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Serveur de Nom et serveur d'Information Réseau"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmes pour la bureautique : traitements de texte (kword, abiword), "
-"tableurs (kspread, gnumeric), visualiseur pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Outils audio : lecteurs mp3 ou midi, mixeurs, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livres et Howto's sur Linux et le Logiciel Libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Station de travail KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - Vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Utilitaires pour le courrier électronique, les news, le web, le transfert de "
-"fichiers, les discussions en ligne"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Base de Données"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Serveurs de bases de données PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Outils pour faciliter la configuration de votre ordinateur"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitaires"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Utilitaires console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Serveur de courrier Postfix, serveur de news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimédia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Plus d'Environnements de Bureau (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Le K Desktop Environement, l'environnement de bureau de base avec sa "
-"collection d'outils"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Environnement graphique"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache et Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Outils pour créer et graver des CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Station de travail bureautique"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Serveur"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmes de graphisme comme The gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"Bibliothèques de développement C et C++, programmes et fichiers d'en-tête"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Serveur réseau"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Jeux"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Lecteurs et éditeurs vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - Graphisme"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Programmes de divertissement : jeux d'arcade, de plateaux, de stratégie, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Ensemble d'outils pour lire ou envoyer des courriers électronique (pine, "
-"mutt), des news (tin), et pour naviguer sur le Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivage, émulateurs, surveillance"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Gestion Financière"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un environnement de bureau avec un ensemble d'applications et d'outils "
-"intuitifs"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients pour différents protocoles dont ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Passerelle internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmes pour jouer/éditer du son et de la vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Autres Environnements de Bureau"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Éditeurs, interpréteurs, utilitaires fichiers, terminaux"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmes pour gérer votre finance, comme gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestionnaire d'Information Personnel"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - Gravage de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Applications scientifiques"
diff --git a/perl-install/share/po/ga.po b/perl-install/share/po/ga.po
deleted file mode 100644
index 30649a12a..000000000
--- a/perl-install/share/po/ga.po
+++ /dev/null
@@ -1,11023 +0,0 @@
-# Irish translations for DrakX, the Mandrake Installer.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Irish Linux Users Group <ilug@linux.ie>, 1999
-#
-# Credits where due:
-#   Proinnsias Breathnach <breatpro@dublin.ml.com-nospam>
-#   Donncha Ó'Caoimh <donncha.ocaoimh@tradesignals.com-nospam>
-#   Barra Ó'Caoimh <Care of donncha.ocaoimh@tradesignals.com-nospam>
-#   John McDonnell <johnmc@student.nuigalway.ie-nospam>
-#   <Alastair McKinstry <mckinstry@computer.org>
-# Who've all contributed so far. 
-# Proinnsias 16-Dec-1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-12-16 10:33+0100\n"
-"Last-Translator: Proinnsias Breathnach <breatpro@dublin.ml.com>\n"
-"Language-Team: Gaeilge <ga@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Cumraigh gach cinn ar leith"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Cumraigh carta \"%s\" (%s) amhain"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Cumraíochti gach cinn iolrach"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Carta Grafach"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Roghnaigh freastalaí X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X freastalaí"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Roghnaigh freastalaí X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X freastalaí"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "Freastalaí XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s le luadghearú crua-earraí 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Freastalaí XFree %s le luasghearú  crua-earraí 3D TRIALACH"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Cumraíocht XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Roghnaigh an méid cuimhne atá id' charta grafachach"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Roghnaigh cumraíocht an freastalaí"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Roghnaigh scáileán"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Scáileán"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Ráta athnuachana cothrománach"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Ráta athnuachana ingearach"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Níl aon scáileán cumraithe"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Níl aon carta grafachach cumraithe"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Níl aoin réiteach cumraithe"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bain trial as roinnt paraiméadair a athrú"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tharla Earráid:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Ag éalú i %d siocand"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tharla earráid, bain trial as roinnt paraiméadair a athrú"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Réiteach"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Roghnaigh Réiteach agus an méid dath"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carta Grafach: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Freastalaí XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mór"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ceart go Leor"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mód Saineolaí"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Taispéan gach ceann"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Réiteachaí"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Leagan amach eocharchlára: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Cineál luchóg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Gaireas luchóige: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Scáileán: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Scáileán HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Scáileán VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carta Grafach: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Carta Grafach: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Cuimhne grafach: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Scáileán VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Réiteachaí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Freastalaí XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Tiománaí XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ag ullmhú cumraíocht X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Athraigh Scáileán"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Athraigh carta grafach"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Athraigh cumraíocht an freastalaí"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Athraigh Réiteach"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Taispeán Eolas"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Bain trial as arís"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Éalaigh"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Coimead an cumraíocht IP atá ann"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ag tús"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Is féidir linn do ríomhaire a shocrú le X a thosnú i ndhiadh bootáil.\n"
-"An dteastaíonn uait go dtosnófar X nuair a aththosnítear an ríomhaire?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Éirigh as le do thoil agus Crtl-Alt-BackSpace a úsáid"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 dath (8 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 míle dath (15 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 míle dath (16 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milliún dath (24 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 billiún dath (32 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB nó níos mó"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Gnáth VGA, 640x480 ag 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ag 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Cinéal 8514, 1024x768 ag 87 Hz Idirdhuillith (gan 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ag 87 Hz Idirdhuillithe, 800x600 ag 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA Leathnaithe, 800x600 ag 60 Hz, 640x480 ag 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Neamh-idirdhuillithe, 1024x768 ag 60 Hz, 800x600 ag 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA d'árd minicíocht, 1024x768 ag 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Scáileán a bhfuil in ann do 1600x1200 ag 70Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Scáileán a bhfuil in ann do 1600x1200 ag 76Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Roghnaigh rang feistiú"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Feistiú LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO le chlár teacs"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO le Chlár Graphaice"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Bootáil as DOS/Windows (loadin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Príomhroghanna bootáil"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Ríomhchlar Tosnaithe a úsáid "
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Feistiú cód tosnaithe"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Gaireas bootáil"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mód fís"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasfhocal"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasfhocal (arís)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Teorannaigh roghanna líne ordú"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "teorannaigh"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Glan /tmp nuair a thosnaigh an coráis"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Tabhair na Méid Cuimhne as MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Aththrialaigh"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ní mar a chéile na pasfhocail"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Scéal Tosnú"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS Loiceadh?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Suim"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Críochnithe"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Athraigh"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Cén sort iontráil a suimigh do"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "CO Eile (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "CO Eile (MunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "CO Eile (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Iomha"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Léamh-Scríobh"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Baolach"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Lipéad"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Gnáth"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Méid-Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "GanBhideó"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Scrios iontráil"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Níl ceadaigh an lipéad folamh ann"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Níl aon ranna agat!"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Is ann cheana don ainm úsáideora seo"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fuair %s %s comhéadan"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "An bhfuil ceann eile agat?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "An bhfuil comhéadan %s agat?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Níl"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Tá"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Leámh an t-eolais crua-earra"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Ag feistáil tiomanaí do %s, carta %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modíl %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Cumraigh roghanna"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Roghachais modúil:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Tá an pasfhocal seo ro-shimplí"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Is ann cheana don ainm úsáideora seo"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Suimigh úsáideoir"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Fíor ainm"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Ainm úsáideora"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Blaosc"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Dealbh"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Uath-Logann"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Is féidir linn do ríomhaire a shocrú le X a thosnú i ndhiadh bootáil.\n"
-"An dteastaíonn uait go dtosnófar X nuair a aththosnítear an ríomhaire?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Roghnagih an úsáidoer gneás:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Roghnaigh an Bainistéoir Fhuinneoga a úsásd:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Gach Rud"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Suimigh úsáideoir"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Socraithe"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Ag Tosnaigh CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cealaigh"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Bocht"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Árd"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Árd"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranóid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Roghnaigh liebhéal slándáil"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Roghnaigh liebhéal slándáil"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Roghnaigh cumraíocht an freastalaí"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-# FIXME
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Fáile go GRUB, an roghnóir Choráis "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Deasc"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Clár Tosnú"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Cumraíocht Stíl Tosnú"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/C_omhad"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Comhad/_Ealu"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>E"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Scáileán Stíl Nua"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Scáileán Tradisiúnta"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monatóir Tradisiúnta Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Tosnaigh Aurora "
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Mód Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Mód Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Cumraigh"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Mód Coras"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Ceart go Leor"
-
-#: ../../bootlook.pm_.c:229
-#, fuzzy, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Earráid ag oscailt %s do scríobh: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d noiméaid"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 noiméad"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d siocand"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Ní féidir liom rann eile a cur isteach"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Fraince"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgáiris"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Gearmáinis"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Greicís"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Ioruais"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Amharc"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Iodálais"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "srathach"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Léigh go curamach"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Earráid"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Draíodoir"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Roghnaigh gníomh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tá rann mór FAT amháin agat.\n"
-"Molaim dhuit an rann sin a athmhéadú ar dtús\n"
-"(roghnaigh an rann agus brú ar \"Athméidigh\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Sonraí"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Malairte"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Folamh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Eile"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Cineál córais-comhadlanna"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Cruthaigh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Cineál"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Scríos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Roghnaigh gníomh"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Leasú"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Lean ar aghaidh ar aon nós?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Éalaigh gan sabháil"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Éalaigh gan an clár-ranna a scríobh?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Glan gach ceann"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Eolas R-Phost"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Tá na ranna príofa uilig úsáidthe"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ní féidir liom rann eile a cur isteach"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Le breis ranna a bheith agat, dealaigh ceann amháin le bheith in ann "
-"rannsínithe a cruthú"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Scriobh clár-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Scriobh clár-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Scriobh clár-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Roghnaigh Comhad"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Níl an méid céanna ar an rann cúltaca\n"
-"Lean ar aghaidh ar aon nós?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Rabhadh"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Cur diosca flapach sa dioscthiomant\n"
-"Caillfear gach sonra ar an dhiosca seo"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Ag iarraidh an clár-ranna a tarrtháil"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Eolas R-Phost"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Roghnachais"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Athméidigh"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Bog"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formáidigh"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Cur le RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Cur le LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Bain ó RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Bain ó RAID"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Athraigh RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Teascán tosasch: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Méid i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Cineál córas-comhadlanna:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Tosaíocht: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ag formáidiú comhad 'loopback' %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Athraigh cineál ranna"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Cén rann atá uait?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Ag ríomhadh teorainn na córais-comhadlanna FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ag athméadú"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:614
-#, fuzzy
-msgid "All data on this partition should be backed-up"
-msgstr "caillfear gach sonra ar an rann seo"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Roghnaigh an méid nua"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Méid i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Teascán"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Cén tescán ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ag bogadh"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ag bogadh rann..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Roghnaigh RAID atá ann le méadú"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nua"
-
-#: ../../diskdrake/interactive.pm_.c:714
-#, fuzzy
-msgid "Choose an existing LVM to add to"
-msgstr "Roghnaigh RAID atá ann le méadú"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "ainm LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Fíor ainm"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Roghachais modúil:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "gaireas"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "leibhéal"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "méid smután"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Cén sort rannú atá ort?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Níl mé sasta /boot a cruthú comh fada sin isteach sa diosca, (ar sorcóir > "
-"1024).\n"
-"Má tá tú ag úsáid LILO ní oibróidh sé, nó níl /boot uait muna n-úsáideann tú "
-"LILO"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Tá an rann atá roghnaithe agat don fréamh (/) suitithe i ndhiadh an 1024ú\n"
-"sorcóir ar an dhiosca, agus níl aon rann /boot agat.\n"
-"Má tá tú chun LILO a úsáid, beidh ort rann /boot a cruthú ar ball."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Scríobhfar clár diosca %s go dhiosca!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Beidh ort an ríomhaire a aththosnú sula ndéanfar an athrú"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ag formáidiú"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ag formáidiú comhad 'loopback' %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ag formáidiú rann %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "teip ar 'mkraid'"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Réiteachaí: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gaireas: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Litir Dioscthiománt DOS: %s (buile faoi thuraim)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Cineál: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ainm: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Tús: teascán %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Méid: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s teascáin"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sorcóir %d go sorcóir %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formáidithe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neamhformáidithe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Rann tosaithe de ghnáth\n"
-"    (do thosnú MS-DOS, ní lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Leibhéal %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Méid smután %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dioscaí RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Méid: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Céimseasamh: %s sorcóir, %s ceann, %s teascán\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-#, fuzzy
-msgid "Info: "
-msgstr "Eolas"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dioscaí LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Cinéal tabla rann: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ar bhús %d, id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Roghnachais: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Cineál córas-comhadlanna:"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Ní mar a chéile na pasfhocail"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Athraigh cineál ranna"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "freastalaí DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "Formáidiú %s de %s teipithe"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "níl a fhios agam conas %s a formáidiú go %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simplí"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Freastalaí"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Earráid ag oscailt %s do scríobh: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tharla earráid - ní fhuaireadh aon gaireas ar a bhféadfaí córais-comhadlanna "
-"nua a cruthu. Ba chóir duit do chuid crua-earraí a seiceáil le cúis an fadhb "
-"a aimsiú"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Níl aon ranna agat!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Earráid ag léamh comhad %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Níl aon ranna malairte agat\n"
-"\n"
-"x1Lean ar aghaidh ar aon nós?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Úsáid spás saor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Ag iarraidh an clár-ranna a tarrtháil"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Cén rann a bhfuil tú ag iarraidh úsáid mar rann fréamhach"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Roghnaigh an méid nua"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Méid i MB do Rhann Fréamhach:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Méid i MB do rhann malairte:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Ag ríomhadh teorainn na córais-comhadlanna FAT"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "rann %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Theip ar uathathmhéadú FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Glan diosca ina iomlán"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Dealaigh Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Úsáid fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Níl aon ranna agat!"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Ní féidir liom rann eile a cur isteach"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Theip ar rannú: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Ag tosnú suas an ghréasán"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ag dúnadh síos an ghreasán"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ta earraid ann, níl a fhios agam conas é a cheartú.\n"
-"Lean ort, ar do phriacal féin."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Fáilte go %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Níl dioscthiománt flapach ar fáil"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ag tosnú ar céim `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Rann Feistiú"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Méid iomlán: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pacáiste mícheart"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ainm: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Leagan: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Méid: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tábhacht: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Feistiú"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Sabháil ar dhiosca flapach"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eirigh as Feistiú"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Ag Feistiú"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Ag meastú"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Am fagtha "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Fan tamall, ag ullmhaigh feistiú"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Ag feistiál  pacáiste %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aontaigh"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Tarrtháil"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Lean ar aghaidh ar aon nós?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tharla earráid"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Ceadúnas"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Eocharclár"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Cén rann feistiú atá uait?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Feistiúi/Uadgrádaigh"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Feistigh nó uasgrádaigh ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Molta"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Saineolaí"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uasgrádaigh"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Gaireas luchóige"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Cumraigh Cártaí PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Ag cumraigh IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "níl aon ranna saora ann"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ni féidir liom an tábla rainn a léamh, tá máchaillí ann :(\n"
-"Leanfaidh mé orm ag cealú droch rainn"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Theip ar DiskDrake an tabla rainn a léamh i gceart.\n"
-"Lean ort, ar do phriacal féin!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rann Fréamhach"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Céard é an rann fréamhach (/) ded' chóras?"
-
-#: ../../install_steps_interactive.pm_.c:411
-#, fuzzy
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Beidh ort an ríomhaire a aththosnú sula ndéanfar an athrú"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ag formáidiú ranna"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nil dothain spas malartu chun insealbhu, chuir leis an spas"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ag curdach do na pacáistí atá ar fáil"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ag cúrdach pacáistí le húasgrádú"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Críochnaithe (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Íosta (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Molta (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Aisig ó dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Aisig ó dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Sabháil ar dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Roghnaigh pacáistí a feistiú ..."
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Fan tamall"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ag Ullmhaigh feistiú"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Ag feisteáil pacáiste %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Cumraíocht Iar-feistú"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Cén ceann do chrois ama"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "An bhfuil an clog cruaearrach ar GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Freastalaí NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Scrios Freastalaí CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Gan  Printéir"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "An bhfuil ceann eile agat?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Coimriú"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Luchóg"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Am Críos"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printéir"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Carta ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Carta Fuaim"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Carta Telefís"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Chomaid Áitiúl"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Socraigh pasfhocal root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Gan pasfhocal"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Deimniú"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Deimniú LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Freastalaí LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Deimniú NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Fearannas NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Freastalaí NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Cead dioscthiománt flapach"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Dara dioscthiomáint flapach"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Scipeáil"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Brón orm, níl aon dioscthiománt flapach ar fáil"
-
-#: ../../install_steps_interactive.pm_.c:1212
-#, fuzzy
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Ag Cruthaigh diosca thosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ag Ullmhaigh ríomhchlar thosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Feistigh cód tosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Cruthaigh flapach bootáil"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Athlódaigh"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_newt.pm_.c:22
-#, fuzzy, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Feistiú Linux-Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ar iarraidh"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Roghnaigh gníomh"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Réamhioaíocht"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Fan tamall"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Eolas"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Droch rogha, aththrialaigh\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Do rogha? (gnás %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Do rogha? (gnás %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Roghnachais: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Do rogha? (gnás %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceichís (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Gearmáinis"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spáinis"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fionlainnais"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francaigh"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Ioruais"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polainnais"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruislís"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Méarchlár UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Meárchlár US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgáiris"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgáiris"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgáiris"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarúisis"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Eilvéis (Stíl Ghearmánais)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Eilvéis (Stíl Francaigh)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceichís (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Gearmáinis (gach meachlár marbh)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danmharghais"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (Meiriceá)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Ioruais)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Meiriceá)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eastóinis"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greicís"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungárais"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Cróitis"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Iodálais"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Seápainis (106 eochair)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Méarchlár Chóiris"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Mheirceá Theas"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Áit"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rúisis (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rúisis (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rúisis (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slóbaicis (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slóbaicis (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Table"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Meárchlár US"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Mearchlár US (idirnaisiúnta)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Luchóg - Sun"
-
-#: ../../mouse.pm_.c:32
-#, fuzzy
-msgid "Logitech MouseMan+"
-msgstr "Luchóg Bus Logitech"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse Gnáth (PS/2)"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 Cnaipe"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Luchóg 2-cnaipe Loiceadh"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Gnáth"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rothar"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "srathach"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Luchóg Gnáth 3-cnaipe"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Luchóg MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Luchóg Logitech CC"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Luchóg Logitech (srathach, séan cinéal C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 cnaipí"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 cnaipí"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "Ar bith"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Luchóg ar bith"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Teastáil an luchóg, le do thoil"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BOG DO ROTHAR!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Fionnlainnis"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "úsáid dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "úsáid pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "úsáid pppoe"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Roghnaigh an cláréadan ghréasán"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ní fuaireathas cárta gréasánú"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Cumraigh gréasánú"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "ÓstAinm"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Draíodóir Cumraíocht Gréasánú"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Móideam ISDN seantrach"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Carta ISDN inmheánamach"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Éirigh  as cumraíocht"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Cumraigh ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eorap (EDS11)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Cén cinéal c atá uait?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Níl fhíos agam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA/ PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Tobscoir"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Lean"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Cén sort carta ISDN atá uait?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Roghanna 'Dialup'"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ainm Nasc"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Uimhir fón"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Ainm Login:"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-bhunaithe"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Teirminéal-bhunaithe"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ainm Fearannas"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Cead Freastalaí DNS"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Dara Freastalaí DNS"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Lean"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Cumraigh gréasánú"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Roghnagih an úsáidoer gneás:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Cumraigh ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Nasc LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Cláréadan Gréasán"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Nasc LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Nasc Printéir"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ag cumrú gléas gréasánú %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr " (tiomáint $module)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Seoladh IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Uath-IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "freastalaí DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gaireas na hInneal Geata"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Cumraigh seach-freastalaí"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Seach-HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Seach-FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Cumraíocht Idirlíon."
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ na Carta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Cuimhne Charta (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "I/A Carta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "I/A_0 Carta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "I/A_1 Carta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-#, fuzzy
-msgid "Your personal phone number"
-msgstr "Uimhir fón"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Uimhir fón"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Roghanna Printéir"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Roghanna Printéir"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Roghnaigh mhéarchlár"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Athraigh cineál ranna"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Ainm Nasc"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Pasfhocal"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr ""
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Droch comhad chúltaca"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Earráidh ag scríobh comhad %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "riachtanas"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tábhachtach"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "an-dheas"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "deas"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "b'fhéidir"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Printéir áitiúl"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Scríos Printéir"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Scrios Freastalaí CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Scrios freastalaí lpd"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Printéir Gréasán (lpd)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Freastalaí Printéir"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Gaireas Printéir (URI)"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Printéir áitiúl"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Scríos Printéir"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Earráidh ag scríobh comhad %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modíl %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP freastalaí SMP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-#, fuzzy
-msgid " (Default)"
-msgstr "Gnáth"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "cumraíocht"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Scrios Freastalaí CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP freastalaí SMP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Poirt"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Gan  Printéir"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Printéir áitiúl"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Gaireas Printéir (URI)"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Printéir áitiúl"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Gaireas Printéir (URI)"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Ag feistiál  pacáiste %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Ag feistiál  pacáiste %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "ÓstAinm"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Roghanna Printéir SMB (Fuinneoga 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "freastalaí óstann SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP freastalaí SMP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Comh. ainm"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupa na hOibre"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Roghanna Printéir NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Freastalaí Printéir"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Roghanna Printéir NetWare"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Gaireas Printéir (URI)"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Ainm Printéir"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Cuntas"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Áit"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Cén sort printéir atá ort?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Bain trial as arís"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printéir"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Uirlisí gnáth"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Gan  Printéir"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Dún"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ag dúnadh síos an ghreasán"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ag dúnadh síos an ghreasán"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Roghanna Printéir"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Gan  Printéir"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Cumraigh Printéir"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Cumraigh gréasánú"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Níl aon scáileán cumraithe"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Cumraigh gréasánú"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Árd"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranóid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Cén rann atá uait?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Cumraigh printéir"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Ag feistiál  pacáiste %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Roghanna Printéir"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Cumraigh printéir"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "An dteastaìonn uait printéir a chumrú?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Clódóir"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Cumraigh gréasánú"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Luchóg ar bith"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Printéir áitiúl"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Scríos Printéir"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Cumraigh seach-freastalaí"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Poirt"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Logann"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Pasfhocal"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Gan pasfhocal"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Ní mar a chéile na pasfhocail"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, fuzzy, c-format
-msgid "Can't write file %s"
-msgstr "Earráidh ag scríobh comhad %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "teip ar 'mkraid'"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printéir"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Idirlíon"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mód Coras"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Scríos Printéir"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Freastalaí Printéir"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Seirbishí"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ag rith"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ag stoppadh"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ar Tús"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Clár Tosnú"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Teascán"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "suimiúil"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Ilmheánach"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Forbairt"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Cláréadan Gréasán"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "freastalaí óstann SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Cluichí"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Saineolaí"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "sainordaitheach"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Ag feistiál  pacáiste %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ni féidir liom an tábla rainn a léamh, tá máchaillí ann :(\n"
-"Leanfaidh mé orm ag cealú droch rainn"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Earráid"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Cumraíocht Iar-feistú"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Cumraíocht Stíl Tosnú"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Comhghairdeas!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Feistiú"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Suimigh úsáideoir"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Ag formáidiú comhad 'loopback' %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Scrios ciú"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Dealaigh Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Teastáil an luchóg, le do thoil"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Aththrialaigh"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Aththrialaigh"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Gan pasfhocal"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Nasc LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Nasc Printéir"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Teastáil an luchóg, le do thoil"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Cláréadan Gréasán"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Athraigh cumraíocht an freastalaí"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Athraigh cumraíocht an freastalaí"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Fan tamall"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Rothar"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Rothar"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Roghachais modúil:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Socraigh córas chomhad"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Roghnachais"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Aisig ó dhiosca flapach"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Eile"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Feistigh córas"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Aisig ó comhad"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Aisig ó comhad"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Socraithe"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/C_úidiú"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Clár Tosnú"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Aisig ó comhad"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Teacs"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Roghnaigh pacáistí ..."
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Sabháil i gcomhad"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Teastáil an luchóg, le do thoil"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "cumraíocht"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Éirigh  as cumraíocht"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Socraigh córas chomhad"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "Teip ag cuardach %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Críochnithe"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formadaigh flapach"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ag Ullmhaigh feistiú"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "teorannaigh"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formáidigh ranna"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Éirigh  as cumraíocht"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oifig"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Tobscoir"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printéir"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Feistigh córas"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Roghnaigh Comhad"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Scríos Printéir"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Scéal Tosnú"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Níl aon gaireas ghreasán san do chorás!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Feistiú"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Níl aon gaireas ghreasán san do chorás!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Eirigh as Feistiú"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "suimiúil"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Níl aon gaireas ghreasán san do chorás!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Cláréadan Gréasán"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Níl aon scáileán cumraithe"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP freastalaí SMP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Ag cumraigh IDE"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Ag feistiál  pacáiste %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "suimiúil"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Cineál: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Inneal Geata:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "suimiúil"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Cumraigh gréasánú"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Tiománaí"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Cláréadan Gréasán"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Clár Tosnú"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Cumraigh gréasánú"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Draíodoir..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Ainm Nasc"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "cumraíocht"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Athraigh cineál ranna"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Inneal Geata:"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Eorap"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Athlódaigh"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Eorap"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "srathach"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Athraigh CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Comhad/_Nua"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Comhad/_Oscail"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Comhad/_Sábháil"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Comhad/Sábháil _Mar"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Comhad/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Roghanna"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Roghnachais/Teastáil"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/C_úidiú"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Cúidiú/_Faoi..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "scéalaí"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "faigh"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Roghnachais"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Tóg comhad"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Feilire"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Ag Parsáil an comhad %s, fan tamall"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Cumraigh Lilo/Grub"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "scáil"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "suimiúil"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Ag formáidiú"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Sábháil mar..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Gaireas bootáil"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "ag leámh cumraíocht"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "ag leámh cumraíocht"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Roghnaigh do theanga"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Roghnaigh rang feistiú"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Cumraigh luchóg"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Roghnaigh mhéarchlár"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Slándáil"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Socraigh córas chomhad"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formáidigh ranna"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Roghnaigh pacáistí ..."
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Feistigh córas"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Suimigh úsáideoir"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Cumraigh gréasánú"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Cumraigh seirbhisí"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Feistigh cód tosnaithe"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Cruthaigh an diosca "
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Cumraigh X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Feistigh córas"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Eirigh as Feistiú"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Earráid ag oscailt %s do scríobh: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "ag leámh cumraíocht"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Fan tamall, ag ullmhaigh feistiú"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Greasan/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Printéir Gréasán (lpd)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oifig"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Stáisiún Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Stáisiún KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "Áit"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Stáisiún Idirlíon"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Stáisiún Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "cumraíocht"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Freastalaí"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Cláréadan Gréasán"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/Nuacht/Groupware"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Stáisiún Cluichí"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Deasc Graphaicí Eile"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Stáisiún Oibre"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Tobscoir"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ar bith"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Roghnagih an úsáidoer gneás:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Scríos Printéir"
-
-#~ msgid "Low"
-#~ msgstr "Bun"
-
-#~ msgid "Medium"
-#~ msgstr "Gnáth"
-
-#, fuzzy
-#~ msgid "mount failed"
-#~ msgstr "teip ar 'mkraid'"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Ilmheánach"
-
-#~ msgid "Boot mode"
-#~ msgstr "Mód Bootáil"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Saineolaí"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Cén cinéal luchóg atá agat?"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Eolas"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Stáisiún Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "údarú"
-
-#~ msgid "user"
-#~ msgstr "úsáideoir"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Cén cinéal luchóg atá agat?"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Éalaigh"
-
-#~ msgid "Active"
-#~ msgstr "Gníomhach"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Níl"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Gaireas na Printéir Áitiúl"
-
-#~ msgid "Printer Device"
-#~ msgstr "Gaireas Printéir"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Scrios Freastalaí CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mód Coras"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Eile"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Roghnaigh rann le do thoil"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Cineál: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Droch comhad chúltaca"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Cumraigh X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Gaireas Printéir"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Cealaigh"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ceart go Leor"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Dún"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Nasc Printéir"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#~ msgid "Total size: "
-#~ msgstr "Méid iomlán: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Fan tamall, "
-
-#~ msgid "Total time "
-#~ msgstr "Am iomlán "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Bain úsáid as an cumraíocht X11 atá ann?"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid "New"
-#~ msgstr "Nua"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Scríos"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Roghnaigh rann le do thoil"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Débhríoch (%s), bí níos cruinn\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (gnás %s)"
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Do rogha? (gnás %s úsáid `none' do ceann ar bith) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Rithléibheal Loiceadh"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Scríobh /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formáidigh gach ceann"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "I ndhiadh na rann ar fad formáidiú,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "caillfear gach sonra ar na ranna"
-
-#~ msgid "Error reading file $f"
-#~ msgstr "Earráid ag léamh comhad $f"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Ceichis (FIXME)"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#~ msgid "Choose"
-#~ msgstr "Rogha"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue"
-#~ msgstr "Scrios ciú"
-
-#~ msgid "Paper Size"
-#~ msgstr "Méid Páipéir"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Roghanna tiománaí Uniprint"
-
-#~ msgid "Name of queue"
-#~ msgstr "Ainm ciú"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Table"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Table"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Cumraíocht Gréasánú"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Bainteach le hIdirlíon"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Bainteach le hIdirlíon"
-
-#~ msgid "yellow pages"
-#~ msgstr "leathanaigh buí"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Cumraigh ADSL"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Roghnaigh Comhad"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#~ msgid "Configure..."
-#~ msgstr "Cumraigh..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "cumraíocht"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Trialaigh an cumraíocht"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Cumraigh LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Cruthaigh flapach bootáil"
-
-#~ msgid "Choice"
-#~ msgstr "Rogha"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Eile"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ceisteanna eile"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Cead Freastalaí DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Dara Freastalaí DNS"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Luchóg ar bith"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Forbairt"
-
-#, fuzzy
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Cén tescán ag a dteastaíonn uait é a bhogadh?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Déan iarracht móideam a aimsiú?"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Cumraigh gréasánú"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Tá gréasánú lóganta cumraithe cheana féin. An dteastaíonn uait:"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Cumraigh Cártaí PCMCIA"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Uirlisí Idirlíon"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Forbairt C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Cumraigh crios ama"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Printéir Gréasán (lpd)"
-
-#, fuzzy
-#~ msgid "Enable num lock at startup"
-#~ msgstr "X ag tús"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Pasfhocal (arís)"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Gaireas na hInneal Geata:"
-
-#~ msgid "default"
-#~ msgstr "gnáth"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Cén ceann do chrois ama"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Úsáid diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Socraithe"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Bain úsáid as scáilcomhad"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Bain úsáid as pasfhocail MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cuardaigh"
-
-#~ msgid "Package"
-#~ msgstr "Pacáiste"
-
-#~ msgid "Tree"
-#~ msgstr "Crann"
-
-#~ msgid "Category"
-#~ msgstr "Saghas"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pacáistí feistiú"
-
-#~ msgid "Available packages"
-#~ msgstr "Pacáistí le fáil"
-
-#~ msgid "Find Package"
-#~ msgstr "Cuardaigh Pacáiste"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Directory"
-#~ msgstr "Eolaire"
-
-#~ msgid "Other countries"
-#~ msgstr "Tír Eile"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "móideim alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "móideim ECI"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ná úsáid pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (tábhachtach)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (an-dheas)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (deas)"
-
-#~ msgid "Czech"
-#~ msgstr "Ceichís"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Athchumraigh an gréasánú áitiúl"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Uath-Réiteach"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Uath-cuardaigh réiteach"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Feistiú/Tarrtháil"
-
-#~ msgid "Rescue"
-#~ msgstr "Tarrtháil"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Luchóg ADB Apple"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Luchóg ADB Apple (2 Cnaipí)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Luchóg Apple ADB (3+ Cnaipí)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Luchóg USB  Apple"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Luchóg USB Apple (2 Cnaipí)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Luchóg USB  Apple (3+ Cnaipí)"
-
-#~ msgid "Generic Mouse (PS/2)"
-#~ msgstr "Mouse Gnáth (PS/2)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (ps/2)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ps/2)"
-
-#~ msgid "ASCII MieMouse (PS/2)"
-#~ msgstr "ASCII MieMouse (PS/2)"
-
-#~ msgid "Genius NetMouse Pro (PS/2)"
-#~ msgstr "Genius NetMouse Pro (PS/2)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Luchóg Bus ATI"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Luchóg Bus Microsoft"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Luchóg USB (3 cnaipí nó níos mó)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A nó barr (srathach)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (srathach)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (srathach)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (srathach)"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (srathach)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (srathach)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Luchóg de gnáth (srathach)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft nó comhoriúnach (srathach)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Luchóg 3-cnaipe de gnáth (srathach)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (srathach)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Cén cinéal luchóg atá agat?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Rúnscríobhach"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Cumraigh LAN"
-
-#~ msgid "Show less"
-#~ msgstr "Taispéan níos lú"
-
-#~ msgid "Show more"
-#~ msgstr "Taispeán níos mo"
diff --git a/perl-install/share/po/gl.po b/perl-install/share/po/gl.po
deleted file mode 100644
index a0f63f21a..000000000
--- a/perl-install/share/po/gl.po
+++ /dev/null
@@ -1,12241 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999, 2000 Mandrakesoft.
-# Copyright (C) 2000 Jesús Bravo Álvarez.
-# José Manuel Cambre <asforber@asforber.com>, 1999
-# Jesús Bravo Álvarez <jba@pobox.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-06-08 18:14+0200\n"
-"Last-Translator: Jesús Bravo Álvarez (mdk) <jba@pobox.com>\n"
-"Language-Team: Galician <trasno@ceu.fi.udc.es>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-#, fuzzy
-msgid "Use Xinerama extension"
-msgstr "Usar detección automática"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "lendo a configuración"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccione unha tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolla un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolla un servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¿Que configuración de XFree quere usar?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s. A tarxeta está soportada por XFree %s, que pode ter un mellor\n"
-"soporte en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware con XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O SISTEMA."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O SISTEMA.\n"
-"A súa tarxeta está soportada por XFree %s, que pode ter un mellor soporte en "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuración de XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione a cantidade de memoria da tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolla as opcións para o servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolla o monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Os dous parámetros críticos son a taxa de actualización vertical, que\n"
-"indica a frecuencia coa que a pantalla completa é actualizada, e máis\n"
-"importante aínda é a taxa de sincronismo horizontal, que é a\n"
-"frecuencia coa que se mostran as liñas de barrido horizontal.\n"
-"\n"
-"É MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n"
-"de frecuencias de sincronismo superior á capacidade real do seu monitor,\n"
-"xa que pode danalo.\n"
-"No caso de dúbida, escolla unha configuración conservadora."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de actualización horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de actualización vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "O monitor non está configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "A tarxeta gráfica aínda non está configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolucións aínda non escollidas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aviso: probar esta tarxeta gráfica pode colgar o ordenador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Proba da configuración"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probe a cambiar algúns parámetros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocorreu un erro:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saíndo en %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "¿É esta a configuración correcta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu un erro, probe a cambiar algúns parámetros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolución"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolla a resolución e a profundidade de cor"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Tarxeta gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Máis"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo experto"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ver todo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolucións"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposición do teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo do rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal do monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical do monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Tarxeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Tarxeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria da tarxeta gráfica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidade de cor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolución: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparando a configuración de X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "¿Qué desexa facer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Mudar o monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Mudar a tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Mudar as opcións do servidor"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Mudar a resolución"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar información"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probar de novo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Saír"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"¿Manter os cambios?\n"
-"A configuración actual é:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Lanzar X11 ó arrincar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Pódese configurar o seu ordenador para que entre automaticamente\n"
-"en X ó arrincar. ¿Desexa que se execute X ó reiniciar?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Entre de novo en %s para activar os cambios"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Saia da sesión e use Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millóns de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 mil millóns de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ou máis"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estándar, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor soportando 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor soportando 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primeiro sector da partición de arranque"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro sector do disco (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalación do SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "¿Onde quere instalar o cargador de arrinque?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalación do LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO con menú de texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO con menú gráfico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrincar dende DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opcións principais do cargador de arrinque"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Cargador de arrinque que usar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalación do cargador de arrinque"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de arrinque"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (non funciona en BIOS antigas)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de vídeo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Retardo antes de arrincar a imaxe por omisión"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Contrasinal"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Contrasinal (de novo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restrinxir opcións da liña de comandos"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restrinxir"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Baleirar /tmp en cada arrinque"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tamaño exacto de memoria se for necesario (atopáronse %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activar perfís múltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Indicar o tamaño da memoria en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"A opción ``restrinxir opcións da liña de comandos'' non ten sentido sen "
-"contrasinal"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Tente de novo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensaxe inicial"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "¿Permitir o arrinque de CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "¿SO por omisión?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Estas son as diferentes entradas.\n"
-"Pode engadir algunhas máis ou cambiar as que xa existen."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Engadir"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Feito"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "¿Que tipo de entrada desexa engadir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imaxe"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Raíz"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Agregar"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura-escritura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Táboa"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Por omisión"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Quitar entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Etiqueta baleira non permitida"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Debe ter unha partición de intercambio"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Esta etiqueta xa se está a usar"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s atopadas"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "¿Ten algunha outra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¿Ten algunha interface %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Non"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Si"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Mire a información sobre o hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando o controlador para a tarxeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¿Que controlador de %s desexa probar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Nalgúns casos, o controlador de %s necesita información extra\n"
-"para funcionar correctamente, aínda que normalmente funcione sen ela.\n"
-"¿Desexa especificar información extra para o controlador ou deixar que el\n"
-"analice o seu equipo e atope a información que necesita? Ás veces,\n"
-"analizar o equipo pode provocar que se pare, pero non debería\n"
-"causar ningún dano."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autodetección"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar as opcións"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Aquí deben ir as diferentes opcións para o módulo %s.\n"
-"As opcións son da forma «nome=valor nome2=valor2 ...».\n"
-"Por exemplo pode ter «io=0x300 irq=7»"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcións do módulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Fallo o cargar o módulo %s\n"
-"¿Desexa retentalo con outros parámetros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s xa foi engadido)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Este contrasinal é demasiado simple"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Indique o nome de usuario"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "O nome de usuario (login) só debe conter letras, números, '-' e '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Este nome de usuario xa está engadido"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Engadir usuario"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduza un usuario\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceptar usuario"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome de usuario"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Login automático"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Pódese configurar o ordenador para que se autentique automaticamente\n"
-"como un usuario.  Se non quere usar esta característica, prema o botón\n"
-"cancelar."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolla o usuario por defecto:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolla o xestor de fiestras para executar:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Pode escoller outras linguas que estarán dispoñibles trala instalación"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Todas"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Engadir usuario"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizado"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS iniciando"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"¿Está seguro de que quere deseleccionalo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Benvida ós crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estándar"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nivel hai que usalo con coidado. Fai que o seu sistema sexa máis\n"
-"sinxelo de utilizar, pero é moi sensible: non debe usarse nunha máquina\n"
-"conectada a outras ou á Internet. Non hai contrasinais de acceso."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Os contrasinais están activados, pero o uso como ordenador de rede aínda\n"
-"non se recomenda."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Esta é a seguridade recomendada para un ordenador usado para conectar\n"
-"á Internet como cliente. Agora hai más comprobacións de seguridade."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Con este nivel de seguridade, é posible usar este sistema coma servidor.\n"
-"A seguridade é agora alta dabondo para usar o sistema coma un servidor\n"
-"que acepta conexións de múltiples clientes."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Tómanse características do nivel 4, pero agora o sistema está completamente\n"
-"pechado. As características de seguridade están ó máximo nivel."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escola o nivel de seguridade"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Establecendo o nivel de seguridade"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolla as opcións para o servidor"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvido ao %s, o selector de sistema operativo!\n"
-"\n"
-"Escolla un sistema operativo na lista de enriba, ou\n"
-"agarde %d segundos para que se arrinque o sistema por defecto.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "­Benvido ao GRUB, o selector de sistemas operativos!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use as teclas %c e %c para seleccionar a entrada marcada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Prema enter para arrincar o SO seleccionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes de arrincar, ou 'c' para a li¤a de comandos."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A entrada marcada arrincarase automaticamente en %d segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "non hai espacio dabondo en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escritorio"
-
-# Manter o 'ú' en iso-8859-1
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menú Inicio"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "¿Onde quere instalar o cargador de arrinque?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "axuda aínda non implementada.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ficheiro"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ficheiro/_Saír"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Mudar o monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Modo de marcación"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Modo de arrinque"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Configurar as X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lanzar o sistema X-Window ó iniciar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Non, non quero login automático"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Si, quero login automático con este (usuario, escritorio)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Aceptar"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "non se pode abrir /etc/inittab para lectura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Non é posible engadir máis particións"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Pode escoller outras linguas que estarán dispoñibles trala instalación"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Alemán"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grego"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Noruegués"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Mirar"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiano"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "serie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Faga primeiro unha copia de seguridade dos seus datos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "¡Lea coidadosamente!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se ten pensado usar aboot, teña coidado de deixar un espacio libre (2048\n"
-"sectores abondan) no inicio do disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Axudante"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Escolla a acción"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Ten unha partición FAT grande\n"
-"(xeralmente usada por Microsoft Dos/Windows).\n"
-"Aconséllase que primeiro a redimensione\n"
-"(prema nela, e logo en \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Prema nunha partición"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalles"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "mount fallou"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercambio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Baleiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Outros"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sist. de ficheiros:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crear"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' no seu lugar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Borrar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Ó mudar o tipo da partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Escolla a acción"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crear unha nova partición"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Mudar a modo experto"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Mudar a modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Refacer"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "¿Continuar de calquera xeito?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Saír sen gardar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "¿Saír do programa sen gardar a táboa de particións?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Asignación automática"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Borrar todas"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Información do correo"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Tódalas particións primarias están usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Non é posible engadir máis particións"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter máis particións, borre unha para poder crear unha partición "
-"estendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Escribir táboa de particións"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automonta-las unidades extraíbles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Seleccione un ficheiro"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A táboa de particións de rescate non ten\n"
-"o mesmo tamaño.  ¿Continuar de calquera xeito?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advertencia"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira un disquete na unidade\n"
-"Perderanse tódolos datos no disquete"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentando recuperar a táboa de particións de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Información do correo"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punto de montaxe"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcións"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Desprazar"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Engadir ó RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Engadir ó LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Quitar do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Quitar do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar o RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crear unha nova partición"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector inicial: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamaño en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo de sist. de ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punto de montaxe: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mudar o tipo de partición"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "¿Qué sistema de ficheiros desexa?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¿Onde desexa montar o ficheiro loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¿Onde desexa montar o dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Non se pode quitar o punto de montaxe porque esta partición estase a\n"
-"usar de loopback.\n"
-"Quite primeiro o loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando os límites do sistema de ficheiros FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta partición non se pode redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Debería facer unha copia de seguridade dos datos desta partición"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ó redimensionar a partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escoller o novo tamaño"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tamaño en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "¿A que disco desexa desprazala?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "¿A que sector desexa desprazala?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Desprazando"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Desprazando partición..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolla un dos RAID para engadirlle"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolla un dos LVM para engadirlle"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "¿Nome do LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Esta partición non pode usarse para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome do ficheiro loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nome real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "O ficheiro xa está a ser usado por outro loopback, escolla outro"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "O ficheiro xa existe. ¿Usalo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcións do módulo:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamaño do bloque de datos"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Teña coidado: esta operación é perigosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "¿Qué tipo de particionamento quere?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Desculpe, mais non se pode crear o directorio /boot tan lonxe no disco\n"
-"(nun cilindro > 1024). Se usa o LILO, non funcionará, e se non o\n"
-"usa, non necesita /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A partición que escolleu para usar como raíz (/) está fisicamente ubicada\n"
-"despois do cilindro 1024 do disco duro, e non ten partición /boot.\n"
-"Se pensa usar o selector de SO de arrinque LILO, lembre engadir unha\n"
-"partición /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Seleccionou unha partición RAID software como raíz (/).\n"
-"Non hai ningún cargador de arrinque que funcione deste xeito sen unha\n"
-"partición /boot.\n"
-"Lembre polo tanto engadir unha partición /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "¡Escribirase ó disco a táboa de particións da unidade %s!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Necesitará reiniciar o equipo para que a modificación sexa tomada en conta"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ó formatar a partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatando"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatando a partición %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid fallou"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolución: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra de unidade DOS: %s (aproximación)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inicio: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaño: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindro %d a cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Non formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Ficheiro(s) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partición de arrinque por omisión\n"
-"    (para arrincar en MS-DOS, non para lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamaño do bloque de datos %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do ficheiro loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaño: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Xeometría: %s cilindros, %s cabezas, %s sectores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de táboa de particións: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcións: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipo de sist. de ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Este contrasinal é demasiado simple (ten que ter polo menos %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Mudar o tipo de partición"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Prema nunha partición"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Servidor DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "O formato %s de %s fallou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Descoñécese o xeito de formatar %s de tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Non pode usar JFS para particións máis pequenas que 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Non pode usar ReiserFS para particións máis pequenas que 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Os puntos de montaxe deben empezar por /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Xa existe unha partición co punto de montaxe %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Non pode usar un volume lóxico LVM para o punto de montaxe %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio debería permanecer dentro do sistema de ficheiros raíz"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necesita un sistema de ficheiros real (ext2, reiserfs) para este punto de "
-"montaxe\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Non pode usar un volume lóxico LVM para o punto de montaxe %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro ó abrir %s para escritura: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu un erro - non se atopou ningún dispositivo válido para crear novos "
-"sistemas de ficheiros. Verifique o seu equipo para ver a razón deste problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "¡Non ten ningunha partición!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Agora poderá escoller que servicios quere que sexan arrincados ó inicio.\n"
-"Cando o seu rato pasa por riba dun elemento, unha pequena axuda aparecerá\n"
-"describindo o cometido do servicio.\n"
-"\n"
-"Sexa especialmente coidadoso neste paso se pretende utiliza-la súa máquina\n"
-"coma un servidor: probablemente non quererá iniciar servicios que non "
-"precisa."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Neste punto, ten que escoller onde quere instalar o sistema operativo\n"
-"Mandrake Linux no disco duro. Se está baleiro, ou se hai outro sistema\n"
-"ocupando todo o espacio dispoñible, terá que particionalo. Basicamente,\n"
-"particionar un disco duro consiste en dividilo loxicamente para crear o\n"
-"espacio para instalar o seu novo sistema Mandrake Linux.\n"
-"\n"
-"\n"
-"Como os efectos do proceso de particionamento son normalmente "
-"irreversibles,\n"
-"o particionamento pode intimidar e resultar estresante para un usuario\n"
-"non experimentado.\n"
-"Este axudante simplifica o proceso. Antes de continuar, consulte o\n"
-"manual e tome o seu tempo.\n"
-"\n"
-"\n"
-"Necesita polo menos dúas particións. Unha é para o propio sistema operativo\n"
-"e a outra é para a memoria virtual (tamén chamada Intercambio ou Swap).\n"
-"\n"
-"\n"
-"Se as particións xa foron definidas (nunha instalación previa ou con outra\n"
-"ferramenta de particionamento), simplemente terá que escoller cales delas\n"
-"usar no seu sistema Linux.\n"
-"\n"
-"\n"
-"Se as particións aínda non foron definidas, terá que crealas. Para facelo,\n"
-"use o axudante dispoñible enriba. Dependendo da configuración do seu disco\n"
-"duro, hai varias solucións dispoñibles:\n"
-"\n"
-"* Usar a partición existente: o axudante detectou unha ou máis particións de "
-"Linux existentes no seu disco duro. Se\n"
-"  quere mantelas, escolla esta opción.\n"
-"\n"
-"\n"
-"* Borrar o disco completo: Se quere borrar tódolos datos e tódalas "
-"particións existentes no disco duro e substituílas\n"
-"  polo seu novo sistema Mandrake Linux, pode escoller esta opción. Teña "
-"coidado con esta solución, xa que non poderá\n"
-"  reverter o proceso despois de confirmar.\n"
-"\n"
-"\n"
-"* Usar o espacio libre na partición de Windows: se Microsoft Windows está "
-"instalado no seu disco duro e ocupa todo o espacio\n"
-"  dispoñible, ten que crear espacio libre para o Linux. Para facelo, pode "
-"borrar a partición de\n"
-"  Microsoft Windows e os datos (mire \"Borrar o disco completo\" ou as "
-"solucións do \"Modo experto\"), ou redimensionar\n"
-"  a partición de Microsoft Windows. O redimensionamento pódese realizar sen "
-"perda de datos. Esta solución é\n"
-"  a recomendada se quere usar Mandrake Linux e Microsoft Windows no mesmo "
-"ordenador.\n"
-"\n"
-"\n"
-"  Antes de escoller esta solución, advirta que o tamaño da súa partición de "
-"Microsoft Windows\n"
-"  será máis pequeno do que é agora. Isto significa que terá menos espacio "
-"libre en Microsoft Windows para\n"
-"  almacenar os seus datos ou instalar novo software.\n"
-"\n"
-"\n"
-"* Modo experto: se quere particionar manualmente o seu disco duro, pode "
-"escoller esta opción. Teña coidado\n"
-"  ó escoller esta solución. É potente pero moi perigosa. Pode perder os seus "
-"datos moi facilmente. Polo tanto,\n"
-"  non a escolla a menos que saiba o que está a facer."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor, sexa paciente. Esta operación pode levar varios minutos."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Escolla \"Instalar\" se non hai ningunha versión previa de Mandrake Linux\n"
-"instalada ou se quere usar varios sistemas operativos.\n"
-"\n"
-"\n"
-"Escolla \"Actualizar\" se quere actualizar unha versión xa instalada de\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"Dependendo do seu coñecemento de GNU/Linux, pode escoller un dos seguintes\n"
-"niveis para instalar ou actualizar o seu sistema operativo Mandrake Linux:\n"
-"\n"
-"* Recomendada: se nunca instalou un sistema operativo GNU/Linux, escolla\n"
-"isto. A instalación será moi\n"
-"  sinxela e apenas se lle preguntarán unhas poucas cuestións.\n"
-"\n"
-"\n"
-"* Personalizada: se ten familiaridade dabondo con GNU/Linux, pode escoller o "
-"uso principal (estación de traballo,\n"
-"  servidor, desenvolvemento) do seu sistema. Terá que responder a máis "
-"cuestións que na clase de instalación\n"
-"  \"Recomendada\", polo que necesitará saber como funciona GNU/Linux para "
-"escoller esta opción.\n"
-"\n"
-"\n"
-"* Experto: se ten un bo coñecemento de GNU/Linux, pode escoller esta clase "
-"de instalación. Do mesmo xeito que en\n"
-"  \"Personalizada\", poderá escoller o uso principal (estación de traballo, "
-"servidor, desenvolvemento). Teña\n"
-"  moito coidado ó escoller este nivel. Vaille permitir facer unha "
-"instalación altamente personalizada.\n"
-"  Responder algunhas cuestións pode ser moi difícil se non ten un bo "
-"coñecemento de GNU/Linux. Polo tanto, non\n"
-"  escolla esta clase de instalación a menos que saiba o que está a facer."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Seleccione o porto correcto. Por exemplo, o porto\n"
-"COM1 en MS Windows chámase ttyS0 en GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-"Linux ou outro sistema operativo presente no seu ordenador.\n"
-"Normalmente, estes outros sitemas son detectados correctamente e "
-"instalados.\n"
-"Se non é o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-"coidadoso na escolla dos parámetros correctos.\n"
-"\n"
-"\n"
-"Tamén pode non querer dar acceso a eses outros sitemas operativos a "
-"calquera,\n"
-"poidendo borrar as entradas correspondentes. Pero neste caso, precisará\n"
-"un disquete de arrinque para poder usalos."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Debe indicar onde desexa poñer a información\n"
-"necesaria para arrincar Linux.\n"
-"\n"
-"\n"
-"A menos que sepa exactamente o que fai, elixa sempre\n"
-"\"Primeiro sector do disco (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira un disquete formatado con FAT na unidade %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar esta selección de paquetes gardada, arrinque a instalación con "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro lendo o ficheiro %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algún hardware do seu ordenador necesita controladores ``propietarios''\n"
-"para funcionar. Pode atopar máis información sobre eles en: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ten que ter unha partición raíz.\n"
-"Para iso, faga unha partición (ou prema nunha que xa exista).\n"
-"Entón escolla a acción ``Punto de montaxe'', e asócieo a `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Debe ter unha partición de intercambio"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Non dispón de partición de intercambio\n"
-"\n"
-"¿Desexa continuar de calquera xeito?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe ter unha partición de intercambio"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar espacio libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usar partición existente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Non hai ningunha partición existente para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partición de Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¿Que partición desexa usar para Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolla os tamaños"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tamaño da partición raíz en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tamaño da partición de intercambio en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espacio libre da partición de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "¿Que partición desexa redimensionar?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculando os límites do sistema de ficheiros de Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionador de FAT non é capaz de manexar a súa partición,\n"
-"ocorreu o seguinte erro: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A partición de Windows está demasiado fragmentada, execute primeiro o "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"¡AVISO!\n"
-"\n"
-"O DrakX vai agora redimensionar a partición de Windows. Teña coidado:\n"
-"esta operación é perigosa. Se aínda non o fixo, debería executar primeiro\n"
-"o scandisk no Windows (e opcionalmente o defrag), e reiniciar a "
-"instalación.\n"
-"Tamén é aconsellable facer unha copia de seguridade dos seus datos.\n"
-"Cando estea seguro, prema Aceptar."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "¿Que tamaño desexa manter para o Windows en"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partición %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "O redimensionamento da FAT fallou: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Non hai particións FAT para redimensionar ou para usar como loopback (ou non "
-"hai espacio libre dabondo)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Borrar o disco completo"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Borrar Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Ten máis dunha unidade de disco duro, ¿en cal delas desexa instalar linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Perderanse TODAS as particións existentes e os seus datos na unidade %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Pode agora particionar %s.\n"
-"Cando remate, non esqueza gravar usando `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Non ten espacio libre dabondo na partición de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Non se pode atopar espacio para a instalación"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O axudante de particionamento do DrakX atopou as seguintes solucións:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento fallou: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Activando a rede"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Desactivando a rede"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocorreu un erro, e o programa non sabe como manexalo de\n"
-"maneira limpa. Continúe ó seu propio risco."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaxe %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Algúns paquetes importantes non se instalaron correctamente.\n"
-"A unidade de cdrom ou o cdrom están defectuosos.\n"
-"Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvido a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ningunha disqueteira dispoñible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando na etapa '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"O seu sistema ten poucos recursos. Pode que teña algún problema\n"
-"instalando Mandrake Linux. Se iso acontece, pode tentar unha instalación\n"
-"en modo texto.  Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n"
-"'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Clase de instalación"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Escolla unha das seguintes clases de instalación:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "O tamaño total dos grupos que seleccionou é aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se quere instalar menos deste tamaño,\n"
-"seleccione a porcentaxe de paquetes que desexe.\n"
-"\n"
-"Unha porcentaxe baixa instalará só os paquetes máis importantes;\n"
-"unha porcentaxe dun 100%% instalará tódolos paquetes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Ten espacio no seu disco para unicamente o %d%% destes paquetes.\n"
-"\n"
-"Se desexa instalar menos ca isto,\n"
-"seleccione a porcentaxe de paquetes que quere instalar.\n"
-"Unha porcentaxe baixa instalará só os paquetes máis importantes;\n"
-"unha porcentaxe de %d%% instalará tódolos paquetes posibles."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vostede poderá escollelos máis especificamente na seguinte etapa."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Porcentaxe de paquetes a instalar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selección dos grupos de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selección individual de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamaño total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquete erróneo"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versión: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaño: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Non pode seleccionar este paquete xa que non hai espacio dabondo para "
-"instalalo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Vanse instalar os seguintes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Vanse eliminar os seguintes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Non pode seleccionar/deseleccionar este paquete"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este é un paquete obrigatorio, non se pode deseleccionar"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Non pode deseleccionar este paquete. Xa está instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"¿Está seguro de que quere deseleccionalo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Non pode deseleccionar este paquete. Ten que ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Gardar nun disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Gardar a selección de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Desinstalar"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolla os paquetes que desexa instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Por favor, agarde, preparando a instalación"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando o paquete %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rexeitar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"¡Mude o Cd-Rom!\n"
-"\n"
-"Por favor, insira o Cd-Rom etiquetado \"%s\" na unidade e prema Aceptar. Se "
-"non o ten, prema Cancelar para omitir a instalación deste Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "¿Seguir adiante?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Houbo un erro ó ordenar os paquetes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Houbo un erro ó instalar os paquetes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocorreu un erro"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "¿Desexa reiniciar a rede?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acordo da licencia"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Escolla a disposición do seu teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Esta é a lista completa de teclados dispoñibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "¿Qué clase de instalación desexa?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalar/Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "¿É isto unha instalación ou unha actualización?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualización"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Gardar a selección de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porto do rato"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Escolla o porto serie onde está conectado o seu rato."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarxetas PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configurando o IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ningunha partición dispoñible"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Examinando as particións para atopar os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Seleccione os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Non se pode ler a táboa de particións, está demasiado deteriorada :(\n"
-"Pódese probar baleirando as particións erróneas (¡Perderanse TODOS os "
-"datos!).\n"
-"A outra solución é impedir que o DrakX modifique a táboa de particións.\n"
-"(o erro é %s)\n"
-"\n"
-"¿Concorda coa perda de tódalas particións?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake non puido ler correctamente a táboa de particións.\n"
-"¡Continúe ó seu propio risco!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Elixa as particións que desexa formatar"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partición raíz"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "¿Cal é a partición raíz (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar o equipo para que a modificación da táboa\n"
-"de particións se tome en conta"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elixa as particións que desexa formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "¿Comprobar os bloques erróneos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatando as particións"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando e formatando o ficheiro %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Non hai espacio de intercambio dabondo para finalizar a instalación,\n"
-"por favor, engada algún"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Buscando os paquetes dispoñibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Atopando os paquetes para actualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"O seu sistema non ten espacio libre dabondo para a instalación ou "
-"actualización (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completo (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínimo (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendado (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Selección dos grupos de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gardar nun disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Elixa o paquete a instalar"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Agarde"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se ten tódolos CDs na lista inferior, prema Aceptar.\n"
-"Se non ten ningún deses CDs, prema Cancelar.\n"
-"Se só faltan algúns dos CDs, desmárqueos, e prema Aceptar."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etiquetado \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparando a instalación"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando o paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuración trala instalación"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Vostede terá agora a posibilidade baixar programas de criptografía.\n"
-"\n"
-"AVISO:\n"
-"\n"
-"Por mor de requirimentos xerais aplicables a estes programas, e impostos\n"
-"por varias xurisdiccións, o cliente e/ou o usuario final destes programas "
-"ten\n"
-"que se asegurar de que as leis da súa xurisdicción lle permiten baixar,\n"
-"almacenar e/ou usar estes programas.\n"
-"\n"
-"Ademais, o cliente e/ou o usuario final ten que ter especial coidado en non\n"
-"infrinxi-las leis da súa xurisdicción. Se o cliente e/ou o usuario final "
-"non\n"
-"respeta estas leis aplicables, incorrerá en sancións graves.\n"
-"\n"
-"De ningún xeito Mandrakesoft nin os seus fabricantes e/ou provedores serán\n"
-"responsables de danos especiais, indirectos ou incidentais, sexan o que "
-"foren\n"
-"(incluindo, pero non limitando a, perda de beneficios, interrupción dos\n"
-"negocios, perda de datos comerciais e outras perdas pecuniarias, e nas\n"
-"eventuais responsabilidades e indemnizacións a seren pagadas por decisión\n"
-"dun tribunal) procedentes do uso, posesión, ou simplemente o feito de "
-"baixar\n"
-"este software, ó cal o cliente e/ou o usuario final tivese eventualmente\n"
-"acceso despois de asinar este acordo.\n"
-"\n"
-"Para calquera pregunta acerca de este acordo, por favor póñase en contacto "
-"con\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Contactando co espello para obter a lista dos paquetes dispoñibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escoller un espello do que coller os paquetes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Contactando co espello para obter a lista dos paquetes dispoñibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "¿Cal é a súa zona horaria?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "¿O reloxo interno do seu ordenador usa a hora GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Sen impresora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "¿Ten algunha outra?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resume"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Rato"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zona horaria"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Tarxeta RDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Tarxeta de son"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Tarxeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Usar NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impresora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contrasinal de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sen contrasinal"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Este contrasinal é demasiado simple (ten que ter polo menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticación"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticación"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autenticación NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disco de arrinque personalizado dálle a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"útil se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuración do seu equipo.\n"
-"Un disco de arrinque personalizado tamén pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo así moito máis fácil a recuperación no caso de fallo\n"
-"grave do sistema. ¿Desexa crear un disco de arrinque para o seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primeira unidade de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segunda unidade de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omitir"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disco de arrinque personalizado dálle a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"útil se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuración do seu equipo.\n"
-"Un disco de arrinque personalizado tamén pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo así moito máis fácil a recuperación no caso de fallo\n"
-"grave do sistema. ¿Desexa crear un disco de arrinque para o seu sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, pero non hai ningunha disqueteira dispoñible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Escolla a disqueteira que quere usar para crear o disco de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creando o disco de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparando o cargador de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "¿Desexa usar aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro instalando aboot, \n"
-"¿probar a forzar a instalación mesmo se iso destrúe a primeira partición?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Cargador de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A instalación do xestor de arrinque fallou. Ocorreu o seguinte erro:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creando un disquete de auto-instalación"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Algunhas das etapas non foron completadas.\n"
-"\n"
-"¿Desexa realmente saír agora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Noraboa, a instalación rematou.\n"
-"Quite o disco de arrinque da unidade e prema [enter] para reiniciar.\n"
-"\n"
-"\n"
-"Para información sobre parches dispoñibles para esta versión\n"
-"de Mandrake Linux, consulte o ficheiro de erratas dispoñibles en\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Para información sobre a configuración do seu sistema, despois\n"
-"da instalación, hai un capítulo na Guía do Usuario Oficial\n"
-"de Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Xerar disquete de auto-instalación"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto-instalación pode ser moi automatizada se así\n"
-"se desexa, nese caso adquirirá o control do disco duro\n"
-"(isto vale para a instalación noutro equipo).\n"
-"\n"
-"Pode preferir realizar novamente a instalación.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizada"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reproducir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gardar a selección de paquetes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalación de Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> entre elementos  |  <Space> escoller  |  <F12> seguinte "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "falla o kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolla a acción"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanzado"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Agarde, por favor"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir árbore"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Pechar árbore"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Mudar entre lista completa e ordenada por grupos"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Elección incorrecta, tente de novo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "¿A súa escolla? (por omisión %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "¿A súa escolla? (por omisión %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcións: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "¿Desexa usar aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "¿A súa escolla? (por omisión %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemán"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Teclado dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Español"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandés"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francés"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruegués"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruso"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estadounidense"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenio (antigo)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenio (máquina de escribir)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaianí (latín)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenio (fonético)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Búlgaro"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorruso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suízo (alemán)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suízo (francés)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemán (sen teclas acentuadas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dinamarqués"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (EUA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruegués)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (EUA)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Xeorxiano (\"ruso\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Xeorxiano (\"latino\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelí"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelí (Fonético)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandés"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Xaponés de 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinoamericano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antigo)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"ringleira de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Localización"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandés"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (disposición qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (disposición qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugués"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadiano (Québec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Esloveno"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaianí (cirílico)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Táboa"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado Thai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Thai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (tradicional modelo \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (moderno modelo \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraíno"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"ringleira de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslavo (latín/cirílico)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Puntos de montaxe circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Quitar primeiro os volumes lóxicos\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Rato Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rato de roda PS2 xenérico"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botón"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Rato de 2 botóns xenérico"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Xenérico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Rato de 3 botóns xenérico"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Rato Logitech (serie, antigo tipo C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botóns"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botóns"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ningún"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ningún rato"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Probe o seu rato"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para activar o rato,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "¡MOVA A RODA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Seguinte ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "¿É isto correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar á Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"O xeito máis habitual de conectar con adsl é con pppoe.\n"
-"Algunhas conexións usan pptp, e algunhas usan dhcp.\n"
-"Se non o sabe con certeza, escolla 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¿Que cliente dhcp desexa usar?\n"
-"Por omisión é o dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Non se detectou ningún adaptador de rede ethernet no seu sistema.\n"
-"Non se pode configurar este tipo de conexión."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolla a interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Escolla o adaptador de rede que desexa usar para conectar á Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "non se atopou ningunha tarxeta de rede"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configurando a rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Introduza o nome da súa máquina se o coñece.\n"
-"Algúns servidores DHCP precisan o nome da máquina para funcionar.\n"
-"Este nome debe ser completamente cualificado,\n"
-"como ``miñamaquina.meulab.miñacomp.es''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nome de máquina"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Axudante da configuración de rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Módem RDSI externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Tarxeta RDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¿Que tipo de conexión RDSI ten?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "¡Detectouse unha configuración de firewall!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "¡Detectouse unha configuración de firewall!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuración da RDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione o seu provedor.\n"
-" Se non está na lista, escolla 'Unlisted'"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo de arrinque"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sen canle-D (liñas dedicadas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "¿Qué protocolo desexa usar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "¿Qué tipo de tarxeta ten?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Non sei"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se ten unha tarxeta ISA, os valores na seguinte pantalla deberían ser os "
-"correctos.\n"
-"\n"
-"Se ten unha tarxeta PCMCIA, ten que coñecer a irq e a e/s da tarxeta.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "¿Cal é a sua tarxeta RDSI?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Detectouse unha Tarxeta RDSI PCI, pero se descoñece o tipo. Seleccione unha "
-"tarxeta PCI na seguinte pantalla."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Non se atopou ningunha tarxeta RDSI PCI. Seleccione unha na próxima pantalla."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Escolla o porto serie onde está conectado o seu módem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcións de chamada"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome da conexión"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Número de teléfono"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID do login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Baseado nun script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Baseado nun terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome de dominio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primeiro Servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segundo Servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Pode reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Está neste intre conectado á internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode conectar á Internet ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Non está neste intre conectado á Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Conectar"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "conexión por RDSI"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configurar a rede"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Conexión e configuración de Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuración da rede"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Como está a facer unha instalación de rede, esta xa está configurada.\n"
-"Prema Aceptar para manter a configuración, ou Cancelar para reconfigurar a "
-"conexión de rede e Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-#, fuzzy
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Conexión á Internet\n"
-"\n"
-"Vaise configurar a súa conexión á internet/rede.\n"
-"Se non quere usar a detección automática, desmarque a caixa.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolla o perfil para configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar detección automática"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Conexión normal por módem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado no porto %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "conexión por RDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectouse %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Conexión LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectouse na interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Conexión LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "tarxeta(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Elixa a ferramenta que queira usar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "¿Desexa que a conexión se inicie ó arrincar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuración da rede"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "¿Desexa reiniciar a rede?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Noraboa. A configuración da rede e de internet está rematada.\n"
-"\n"
-"Agora vai ser aplicada ó seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Tras facer iso, aconséllase reiniciar o sistema X para\n"
-"evitar os problemas de mudar o nome de máquina."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVISO: Este dispositivo foi configurado previamente para conectar á "
-"Internet.\n"
-"Simplemente acepte para manter o dispositivo configurado.\n"
-"Se modifica os campos de embaixo, subsituirá esta configuración."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Introduza o enderezo IP desta máquina, por favor.\n"
-"Cada valor ten que ser introducido coma un enderezo IP en\n"
-"notación decimal con puntos (por exemplo: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurar o dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Enderezo IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Máscara de rede"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automático"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Introduza o nome da súa máquina.\n"
-"Ese nome debe ser un nome completamente cualificado,\n"
-"como ``miñamaquina.meulab.miñacomp.es''.\n"
-"Pode tamén introducir o enderezo IP da pasarela se usa unha"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuración dos proxys"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "O proxy debería ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "O proxy debería ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "¿Quere probar agora a conexión á Internet?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probando a conexión..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "O sistema está conectado á Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Semella que o sistema non está conectado á internet.\n"
-"Probe reconfigurando a conexión."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuración da conexión"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Encha ou marque os campos de embaixo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ da tarxeta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoria da tarxeta (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S da tarxeta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_0 da tarxeta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 da tarxeta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "O seu número de teléfono persoal"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (p.ex provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Número de teléfono do provedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escoller teclado"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de marcación"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de conexión: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de conexión: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login da conta (nome de usuario)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Contrasinal da conta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mount fallou: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "As particións estendidas non están soportadas nesta plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ten un burato na táboa de particións, pero non se pode usar.\n"
-"A única solución é desprazar as particións primarias para que\n"
-"o burato esté despois das particións estendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Fallou a restauración a partir do ficheiro %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro escribindo ó ficheiro %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Está a acontecer algo grave coa súa unidade.\n"
-"A proba para verificar a integridade dos datos fallou.\n"
-"Isto significa que calquera escritura no disco producirá lixo aleatorio"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "debe telo"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "moi bo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "indiferente"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de rede (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de impresión"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Erro escribindo ó ficheiro %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(módulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP do servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Por omisión)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selección da conexión da impresora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¿Como está conectada a impresora?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Cun servidor CUPS remoto, non terá que configurar aquí\n"
-"ningunha impresora, xa que serán detectadas automaticamente.\n"
-"No caso de dúbida, seleccione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuración da LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O número de porto debe ser numérico"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porto"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probar portos"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Usar detección automática"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detectouse %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Escolla o porto serie onde está conectado o seu módem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuración"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcións da impresora remota lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para utilizar unha fila de impresión remota lpd, é necesario\n"
-"que indique o nome do servidor de impresión e o nome da fila\n"
-"nese servidor."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcións de impresora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir nunha impresora SMB, é necesario escribir o\n"
-"nome do servidor SMB (que non sempre é o mesmo que o nome de\n"
-"máquina TCP/IP) e posiblemente o enderezo IP do servidor de\n"
-"impresoras, ademais é necesario o nome do recurso compartido\n"
-"da impresora que quere usar, así como calquera nome de usuario,\n"
-"grupo de traballo ou contrasinal que for necesario."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Servidor de SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome de recurso compartido"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de traballo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcións de impresora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir nunha impresora NetWare, é necesario escribir o nome\n"
-"do servidor de impresión NetWare (que non sempre é o mesmo que\n"
-"o nome de máquina TCP/IP), ademais do nome da fila de impresión\n"
-"que desexa usar, así como calquera nome de usuario ou contrasinal\n"
-"que for necesario."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome da fila de impresión"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcións da impresora de socket"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir nunha impresora de socket, ten que fornecer\n"
-"o nome do servidor da impresora, e opcionalmente o número do porto."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome da impresora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descrición"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Localización"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "¿É isto correcto?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Conexión da impresora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "¿Qué tipo de impresora ten?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "¿Desexa probar a impresión?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Probar portos"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Si, imprimir ambas páxinas de proba"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impresora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ferramentas estándar"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A(s) páxina(s) de proba enviáronse ó servidor de impresión.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"Estado da impresión:\n"
-"%s\n"
-"\n"
-"¿Funciona correctamente?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A(s) páxina(s) de proba enviáronse ó servidor de impresión.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"¿Funciona correctamente?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Rato"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Desactivando a rede"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Desactivando a rede"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcións da impresora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configurar a impresora"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Probando a conexión..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar a rede"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "O monitor non está configurado"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configurando a rede"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "¿Que sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "¿Que sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selección da conexión da impresora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¿Que sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar impresora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcións da impresora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configurar impresora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "¿Desexa configurar unha impresora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Estas son as filas de impresión.\n"
-"Pode engadir unha nova ou cambiar as que xa existen."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Estas son as filas de impresión.\n"
-"Pode engadir unha nova ou cambiar as que xa existen."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configurar a rede"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Conexión da impresora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¿Desexa reiniciar a rede?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuración dos proxys"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Porto"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "O proxy debería ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "O número de porto debe ser numérico"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "O proxy debería ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Login automático"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Contrasinal"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Sen contrasinal"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Non se pode engadir unha partición ó RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Non se pode escribir o ficheiro %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fallou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fallou (¿pode que non estean as raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Non hai particións dabondo para o nivel RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un xestor de comandos periódicos."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd úsase para monitorizar o estado da batería e rexistralo a través do\n"
-"syslog. Tamén pode usarse para apagar a máquina cando a batería está baixa."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa os comandos programados polo comando at á hora indicada cando\n"
-"se executou at, e lanza comandos de lotes cando a carga media é baixa\n"
-"dabondo."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"O cron é un programa estándar de UNIX que executa programas especificados\n"
-"polo usuario en datas periódicas programadas. O vixie cron engade algunhas\n"
-"características ó cron básico de UNIX, incluindo mellor seguridade e\n"
-"opcións de configuración máis potentes."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM engade soporte para o rato ás aplicacións de texto de Linux, como\n"
-"o Midnight Commander. Tamén permite operacións de cortar e pegar co rato\n"
-"na consola, así como inclúe soporte para menús."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache é un servidor de World Wide Web.  Úsase para servir ficheiros HTML\n"
-"e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O daemon superservidor de internet (usualmente chamado inetd) lanza varios\n"
-"outros servicios de internet cando se precisan. É o responsable de iniciar\n"
-"moitos servicios, incluíndo telnet, ftp, rsh, e rlogin. Desactivando inetd\n"
-"desactívanse tódolos servicios de internet dos que é responsable."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga o mapa de teclado seleccionado en /etc/sysconfig/"
-"keyboard.\n"
-"Este pode escollerse usando a utilidade kbdconfig. Debería deixar isto\n"
-"activado para a maioría dos sistemas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd é o daemon de impresión requirido para que o lpr funcione\n"
-"correctamente. É basicamente un servidor que distribúe os traballos de\n"
-"impresión á(s) impresora(s)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) é un servidor de nomes de dominio (DNS), que se emprega\n"
-"para converter os nomes de máquinas a enderezos IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta tódolos puntos de montaxe de sistemas de\n"
-"ficheiros de Rede (NFS), SMB (Lan Manager/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva tódalas interfaces de rede configuradas para\n"
-"seren activadas no arrinque."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS é un protocolo popular para compartir ficheiros a través de redes TCP/"
-"IP.\n"
-"Este servicio fornece funcionalidade de servidor NFS, que se configura co\n"
-"ficheiro /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS é un protocolo popular para compartir ficheiros a través de\n"
-"redes TCP/IP. Este servicio fornece funcionalidade de bloqueo de ficheiros."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"O soporte PCMCIA é normalmente para cousas como ethernet e módems en\n"
-"portátiles.  Non será arrincado ata que non estea configurado de xeito\n"
-"que non haxa problemas ó telo instalado en máquinas que non o precisan."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper xestiona as conexións RPC, que son usadas por protocolos\n"
-"como NFS e NIS. O servidor portmap ten que estar a se executar en máquinas\n"
-"que actúan de servidores de protocolos que usan o mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix é un axente de transporte de correo (MTA), que é o programa\n"
-"que move o correo dunha máquina a outra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Garda e restaura o estado da entropía do sistema para unha xeración\n"
-"de números aleatorios de calidade."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O daemon routed permite actualizacións automáticas da táboa de\n"
-"encamiñamento IP mediante o protocolo RIP. Mentres RIP se usa amplamente\n"
-"en redes pequenas, outros protocolos máis complexos de encamiñamento\n"
-"precísanse para redes máis complexas."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protocolo rstat permite ós usuarios dunha rede obter\n"
-"métricas de rendemento de calquera máquina desa rede."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers permite ós usuarios dunha rede identificar quen\n"
-"está conectado noutras máquinas activas."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que os usuarios remotos obteñan unha lista de\n"
-"tódolos usuarios conectados a unha máquina que está a executar o daemon\n"
-"rwho (similar ó finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Lanzar o sistema X-Window ó iniciar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"O syslog é o método que usan moitos daemons para rexistrar mensaxes\n"
-"nos diversos ficheiros de rexistro do sistema.  É unha boa idea executar\n"
-"sempre o syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Executa e para o Servidor de Fontes X ó arrincar e apagar."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Escolla os servicios que deben ser lanzados no arrinque do sistema"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impresora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcións da impresora remota lpd"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Bases de datos"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositivo"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "a se executar"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servicios e daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Non hai información adicional\n"
-"sobre este servicio, desculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ó arrincar"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Estado:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resto do mundo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Acceso á Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Gráficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolvemento"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centro de control"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interface de rede"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Servidor de SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Xogos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Experto"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "obrigatorio"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalando o paquete %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Non se pode ler a táboa de particións, está demasiado deteriorada :-(\n"
-"Probarase a ir poñendo en branco as particións erróneas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuración trala instalación"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "¡Noraboa!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Engadir usuario"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selección dos grupos de paquetes"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Eliminar fila"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Usuarios"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Tente de novo"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Tente de novo"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Sen contrasinal"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Conexión LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Selección da conexión da impresora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Escolla a disposición do seu teclado."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Prema nunha partición"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nome de usuario"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Usar optimizacións de disco duro"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Usar optimizacións de disco duro"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Agarde"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opcións do módulo:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuración da rede"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-#, fuzzy
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr "Ficheiros:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-#, fuzzy
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr "Ficheiros:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcións"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Escolla o porto serie onde está conectado o seu módem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configuración da rede"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Outros"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaurar a partir dun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaurar a partir dun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizado"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Axuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Estado:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurar"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Texto"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Seleccionar paquetes"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Gardar nun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuración da rede"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuración da rede"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Fallou a instalación do %s. Ocorreu o erro seguinte:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s non atopado"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "feito"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formatar disquete"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preparando a instalación"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "restrinxir"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "restrinxir"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatar particións"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Desinstalando os RPMs"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punto de montaxe"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elixa as particións que desexa formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Office"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Abortar"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impresora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Seleccione un ficheiro"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impresora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Mensaxe inicial"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "¡Non hai ningún adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "¡Non hai ningún adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Saír da instalación"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "A compartición da conexión á Internet está activada"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está activada.\n"
-"\n"
-"¿Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Desactivando os servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "A compartición da conexión á Internet está agora desactivada."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "A compartición da conexión á Internet está desactivada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está desactivada.\n"
-"\n"
-"¿Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activando os servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "A compartición da conexión á Internet está agora activada."
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Está a piques de configurar o seu ordenador para que comparta a conexión á "
-"Internet.\n"
-"\n"
-"Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
-"área local (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (usando o módulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "¡Non hai ningún adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Non se detectou ningún adaptador de rede ethernet no seu sistema. Execute a "
-"ferramenta de configuración de hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Só hai un adaptador de rede configurado no seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Vaise configurar a rede de área local usando ese adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Escolla o adaptador de rede que vai estar conectado á rede de área local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "O monitor non está configurado"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuración de Internet"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"¡Atopouse un conflicto potencial de enderezos da LAN na configuración actual "
-"de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "¡Detectouse unha configuración de firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"¡Atención! Detectouse unha configuración de firewall existente. Pode que "
-"teña que facer algún arranxo manual trala instalación."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando os scripts, instalando o software, iniciando os servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas instalando o paquete %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Xa está todo configurado.\n"
-"Agora pode compartir a conexión á Internet con outros ordenadores da rede de "
-"área local, usando a configuración automática de rede (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está desactivada.\n"
-"\n"
-"¿Que desexa facer?"
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está activada."
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "A compartición da conexión á Internet está activada"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Conexión e configuración de Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuración de rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Borrar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil para borrar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nome de máquina: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acceso á Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasarela:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar o acceso á Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Controlador"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Estado"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar a rede de área local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Axudante..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor, agarde... Aplicando a configuración"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Non conectado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-#, fuzzy
-msgid "Disconnect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo de arrinque"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado o arrincar"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Activar"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Activar"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuración da conexión á Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuración da conexión á Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de conexión: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parámetros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasarela"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Tarxeta Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Establecendo o nivel de seguridade"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de control"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elixa a ferramenta que queira usar"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadiano (Québec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandés"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Escolla a disposición do seu teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "¿Quere que a tecla de Borrar devolva Suprimir na consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Mude o Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor, insira o Cd-Rom de instalación na unidade e prema Aceptar.\n"
-"Se non o ten, prema Cancelar para evitar a actualización "
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "draknet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ficheiro/_Novo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ficheiro/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Ficheiro/_Gardar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>G"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Ficheiro/Gardar _como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "Ficheiro/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcións"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcións/Proba"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/A_xuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Axuda/_Acerca..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nome de usuario"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Mensaxe inicial"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Máquina:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Máquina:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interesante"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatando"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuración"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gardar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "non se atopou ningún serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "¿Emular o terceiro botón?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Seleccione unha tarxeta gráfica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo de arrinque"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "lendo a configuración"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "lendo a configuración"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escoller a lingua"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Clase de instalación"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detectar discos duros"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar o rato"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escoller teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemas de ficheiros"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar particións"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Seleccionar paquetes"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Engadir usuario"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar a rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar servicios"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Cargador de arrinque"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crear disquete de arrinque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar as X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Saír da instalación"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adaptador %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Erro ó abrir %s para escritura: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "lendo a configuración"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Por favor, agarde, preparando a instalación"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordenador de rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estación de traballo Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot ou o seu Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estación de traballo"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Encamiñador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de oficina: procesadores de texto (kword, abiword), follas de "
-"cálculo (kspread, gnumeric), visualizadores de pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ferramentas de audio: reproductores de mp3 ou midi, mesturadores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libros e howtos sobre Linux e o software libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estación de traballo KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conxunto de ferramentas para correo, novas, web, transferencia de ficheiros "
-"e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Bases de datos"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "¿Desexa probar a configuración?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilidades"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentación"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas de consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estación Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estación multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuración"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Máis escritorios gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"O ambiente de escritorio KDE, o ambiente gráfico básico cunha colección de "
-"ferramentas que o acompañan"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para crear e gravar CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estación de traballo de oficina"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gráficos como o Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"Bibliotecas de desenvolvemento en C e C++, programas e ficheiros include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor de ordenadores de rede"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Correo/Groupware/Novas"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estación de xogos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductores e editores de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimentos: arcade, taboleiros, estratexia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conxunto de ferramentas para ler e enviar correo e novas (pine, mutt, tin..) "
-"e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivado, emuladores, monitorizaxe"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzas persoais"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un ambiente gráfico cun conxunto de aplicacións amigables e ferramentas de "
-"escritorio"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Acceso á Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas de reproducción/edición de son e vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros escritorios gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, ferramentas de ficheiro, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para xestionar as súas finanzas, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Xestión de información persoal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Gravación de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estación de traballo científica"
-
-#~ msgid "None"
-#~ msgstr "Ningún"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Agora pode indicar as opcións para o módulo %s."
-
-#~ msgid "Low"
-#~ msgstr "Baixo"
-
-#~ msgid "Medium"
-#~ msgstr "Medio"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Poucas melloras neste nivel de seguridade, a principal é que hai máis\n"
-#~ "avisos e comprobacións de seguridade."
-
-#~ msgid "mount failed"
-#~ msgstr "mount fallou"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linux xestiona a hora en GMT ou \"Hora do Meridiano de Greenwich\", e a\n"
-#~ "traslada á hora local dependendo da zona que vostede escolla."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Conectar á Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Desconectar de Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configurar a conexión de rede (LAN ou Internet)"
-
-#~ msgid "Active"
-#~ msgstr "Activar"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Unha impresora, de modelo \"%s\", foi detectada en "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Dispositivo de impresión local"
-
-#~ msgid "Printer Device"
-#~ msgstr "Dispositivo da impresora"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Escolla o tamaño que quere instalar"
-
-#~ msgid "Total size: "
-#~ msgstr "Tamaño total: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Agarde, por favor, "
-
-#~ msgid "Total time "
-#~ msgstr "Tempo total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "¿Usar a configuración existente para X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "¿A que dispositivo está conectada a súa impresora?\n"
-#~ "(advirta que /dev/lp0 é equivalente a LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Atención, o adaptador de rede xa está configurado. Vai ser reconfigurado."
-
-#~ msgid "New"
-#~ msgstr "Novo"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambigüidade (%s), sexa máis preciso\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (por omisión %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "¿A súa escolla? (por omisión %s, escriba 'none' para ningunha)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "non se pode abrir /etc/sysconfig/autologin para lectura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "¿Desexa reiniciar a rede?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "¿Concorda?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Está a piques de se reiniciar o dispositivo de rede:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Está a piques de se reiniciar o dispositivo de rede %s. ¿Concorda?"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Escolla a lingua que prefira para a instalación e para o sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Ten que aceptar os termos da licencia de enriba para continuar coa "
-#~ "instalación.\n"
-#~ "\n"
-#~ "\n"
-#~ "Por favor, prema \"Aceptar\" se concorda con eses termos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Por favor, prema \"Rexeitar\" se non concorda con eses termos. A "
-#~ "instalación rematará sen modificar a súa configuración actual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Escolla a disposición do teclado que corresponda ó seu na lista"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Se desexa ter outras linguas (á parte da que escolleu ó principio da\n"
-#~ "instalación) dispoñibles trala instalación, escóllaas na lista de "
-#~ "enriba.\n"
-#~ "Se quere seleccionar todas, só ten que usar \"Todas\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleccione:\n"
-#~ "\n"
-#~ "  - Personalizada: Se xa está familiarizado con GNU/Linux, pode entón "
-#~ "escoller\n"
-#~ "    o uso principal da súa máquina. Mire embaixo para os detalles.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Experto: Isto supón que vostede manexa ben GNU/Linux e quere facer\n"
-#~ "    unha instalación altamente personalizada. Do mesmo xeito que coa\n"
-#~ "    clase de instalación \"Personalizada\", poderá escoller o uso do seu\n"
-#~ "    sistema. Pero, por favor, ¡NON ESCOLLA ISTO A MENOS QUE SAIBA O QUE\n"
-#~ "    ESTÁ A FACER!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Agora ten que definir o uso da súa máquina. As escollas son:\n"
-#~ "\n"
-#~ "* Estación de traballo: esta é a escolla ideal se pretende usar a súa "
-#~ "máquina principalmente para o uso cotián,\n"
-#~ "  na oficina ou na casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolvemento: se pretende usar a súa máquina principalmente para o "
-#~ "desenvolvemento de software, esta é unha boa escolla.\n"
-#~ "  Terá unha completa colección de software instalado para compilar, "
-#~ "depurar e formatar código fonte, ou\n"
-#~ "  para crear paquetes de software.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: se pretende usar esta máquina coma servidor, é a escolla "
-#~ "correcta. Sexa un servidor de ficheiros (NFS\n"
-#~ "  ou SMB), un servidor de impresión (estilo Unix ou Microsoft Windows), "
-#~ "un servidor de autenticación (NIS), un servidor\n"
-#~ "  de bases de datos, etc... Como tal, non espere que haxa cousas como "
-#~ "KDE, GNOME, etc. instaladas."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Agora pode selecciona-lo grupo de paquetes que desexa instalar\n"
-#~ "ou actualizar.\n"
-#~ "\n"
-#~ "DrakX comprobará se ten espacio dabondo para instalalos todos. Se non,\n"
-#~ "avisaralle diso. Se quere seguir aínda así, procederá coa instalación\n"
-#~ "de tódolos grupos seleccionados, pero deixará algún de menor interese.\n"
-#~ "Ó final da lista pode marca-la opción \"Selección individual de paquetes"
-#~ "\";\n"
-#~ "neste caso terá que percorrer máis de 1000 paquetes..."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se ten tódolos CDs da lista superior, prema Aceptar. Se non ten\n"
-#~ "ningún deses CDs, prema Cancelar. Se só faltan algúns dos CDs,\n"
-#~ "desmárqueos, e prema Aceptar."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Acenda o seu módem e escolla o correcto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Vostede pode agora introduci-las opcións de chamada. Se non está seguro "
-#~ "de\n"
-#~ "que escribir, a información correcta pode obtela do seu ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Introduza:\n"
-#~ "\n"
-#~ "  - Dirección IP: se non a coñece, pregúntelle ó seu administrador de "
-#~ "rede\n"
-#~ "ou ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Máscara de Rede: \"255.255.255.0\" é normalmente unha boa elección. "
-#~ "Se\n"
-#~ "non está seguro, pregunte ó seu administrador de rede ou ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - IP automática: Se a súa rede usa o protocolo bootp ou dhcp, escolla\n"
-#~ "esta opción. Neste caso, non é necesario ningún valor en \"Dirección IP"
-#~ "\".\n"
-#~ "Se non está seguro, pregunte ó seu administrador de rede ou ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Se a súa rede usa NIS, escolla \"Usar NIS\". Se non o sabe, pregúntelle "
-#~ "ó\n"
-#~ "seu administrador de rede."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Agora pode introducir as opcións de marcado. Se non está seguro do\n"
-#~ "que escribir, a información correcta pode obtela do seu ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se vai usar proxys, configúreos agora. Se non sabe se vai usar proxys,\n"
-#~ "pregunte ó seu administrador de rede ou ó seu ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Pode instalar paquetes de criptografía se xa configurou a súa conexión a\n"
-#~ "internet correctamente. Primeiro escolla un espello do que quere baixa-"
-#~ "los\n"
-#~ "paquetes, e entón escolla os paquetes que desexa instalar.\n"
-#~ "\n"
-#~ "Percátese de que ten que escolle-lo espello e os paquetes criptográficos\n"
-#~ "de acordo coa súa lexislación."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Agora pode seleccionar a zona horaria dependendo do lugar onde viva."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Agora pode introduci-lo contrasinal do superusuario para o seu sistema\n"
-#~ "Mandrake Linux. O contrasinal deberá ser tecleado dúas veces para\n"
-#~ "comprobar que ámbolos dous son idénticos.\n"
-#~ "\n"
-#~ "\n"
-#~ "O superusuario (root) é o administrador do sistema, e é o único usuario\n"
-#~ "ó que se lle permete modifica-la configuración do sistema. ¡Por tanto,\n"
-#~ "escolla o contrasinal con coidado! O uso non autorizado da conta de root\n"
-#~ "pode ser extremadamente perigoso para a integridade do sistema e os seus\n"
-#~ "datos, e para os outros sistemas conectados a el. O contrasinal debería\n"
-#~ "ser unha mestura de caracteres alfanuméricos e de 8 caracteres de longo,\n"
-#~ "polo menos. NUNCA debe ser anotado. Non escolla un contrasinal longo\n"
-#~ "de máis ou complicado: ten que ser capaz de lembralo sen moito esforzo."
-
-# Non é realmente fuzzy, é só para revisala. :)
-#, fuzzy
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Pode agora crear unha ou varias contas de usuarios «normais», como\n"
-#~ "contraposición á conta de usuario «privilexiado», root. Vostede\n"
-#~ "pode crear unha ou máis contas para cada persoa á que vostede queira\n"
-#~ "permitirlle o uso do ordenador. Note que cada conta de usuario terá\n"
-#~ "as súas preferencias (ambiente gráfico, configuración dos programas, "
-#~ "etc.)\n"
-#~ "e o seu propio directorio (chamado \"home\"), no que se almacenan esas\n"
-#~ "preferencias.\n"
-#~ "\n"
-#~ "\n"
-#~ "Antes que nada, ¡cree unha conta para vostede mesmo! Aínda se é a única\n"
-#~ "persoa que vai usa-la máquina, NON debe entrar como root para o uso\n"
-#~ "diario do sistema: é un risco de seguridade elevado. Facer que o\n"
-#~ "sistema fique totalmente inoperante, pode ser moitas veces causa dun\n"
-#~ "simple erro ó teclear.\n"
-#~ "\n"
-#~ "\n"
-#~ "Polo tanto, debe entrar no sistema usando a conta de usuario normal que\n"
-#~ "vai crear aquí, e entrar como root só para as tarefas de administración\n"
-#~ "que o precisen."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "As opcións principais do LILO e do grub son:\n"
-#~ "  - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
-#~ "partición dun disco duro) que contén o sector de arrinque. A menos que\n"
-#~ "saiba específicamente que é outro, escolla \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retardo antes de arrinca-la imaxe por omisión: Indica o número de\n"
-#~ "décimas de segundo que agardará o cargador de inicio antes de arrincar a\n"
-#~ "primeira imaxe. Isto é útil nos sistemas que arrincan inmediatamente do\n"
-#~ "disco duro tras activa-lo teclado. O boot loader non agarda se o \"retardo"
-#~ "\"\n"
-#~ "é cero ou non se indica.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Modo de vídeo: Indica o modo de texto VGA que será utilizado ó\n"
-#~ "arrincar. Os seguintes valores están dispoñibles:\n"
-#~ "    * normal: escoller modo de texto normal 80x25.\n"
-#~ "    * <número>: usa-lo modo de texto correspondente."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-#~ "Linux ou outro sistema operativo presente no seu ordenador.\n"
-#~ "Normalmente, estes outros sitemas son detectados correctamente e "
-#~ "instalados.\n"
-#~ "Se non é o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-#~ "coidadoso na escolla dos parámetros correctos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tamén pode non querer dar acceso a eses outros sitemas operativos a "
-#~ "calquera,\n"
-#~ "poidendo borrar as entradas correspondentes. Pero neste caso, precisará\n"
-#~ "un disquete de arrinque para poder usalos."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "As opcións principais do LILO e do grub son:\n"
-#~ "  - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
-#~ "partición dun disco duro) que contén o sector de arrinque. A menos que\n"
-#~ "saiba específicamente que é outro, escolla \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Retardo antes de arrinca-la imaxe por omisión: Indica o número de\n"
-#~ "décimas de segundo que agardará o cargador de inicio antes de arrincar a\n"
-#~ "primeira imaxe. Isto é útil nos sistemas que arrincan inmediatamente do\n"
-#~ "disco duro tras activa-lo teclado. O boot loader non agarda se o \"retardo"
-#~ "\"\n"
-#~ "é cero ou non se indica.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Modo de vídeo: Indica o modo de texto VGA que será utilizado ó\n"
-#~ "arrincar. Os seguintes valores están dispoñibles:\n"
-#~ "    * normal: escoller modo de texto normal 80x25.\n"
-#~ "    * <número>: usa-lo modo de texto correspondente."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Agora é o momento de configura-lo sistema de fiestras X, que é\n"
-#~ "o centro da interface gráfica de Linux. Para iso necesita configura-\n"
-#~ "-la súa tarxeta de vídeo e o seu monitor. A maioría deses pasos están\n"
-#~ "automatizados, así que probablemente a súa tarea limitarase a verificar\n"
-#~ "o que se fixo e aceptar a configuración proposta :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Cando a configuración estea rematada, lanzarase o servidor X\n"
-#~ "(a menos que vostede lle pida a DrakX que non), de xeito que\n"
-#~ "poida comprobar se todo está ben e corresponde ó que desexa.\n"
-#~ "Se non, pode voltar atrás e troca-la configuración; tantas\n"
-#~ "veces como sexa necesario."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se algo vai mal coa configuración de X, use estas opcións para "
-#~ "configurar\n"
-#~ "correctamente o sistema X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se prefire usar un login gráfico, escolla \"Si\". Doutro xeito,\n"
-#~ "seleccione \"Non\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "O sistema vaise reiniciar.\n"
-#~ "\n"
-#~ "Despois de reiniciar, o seu novo sistema Mandrake Linux cargarase\n"
-#~ "automaticamente. Se vostede quere iniciar outro sistema operativo que xa\n"
-#~ "exista, lea as instruccións adicionais."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Checo (Programadores)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslovaco (Programadores)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nome do perfil para crear:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Escribir /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatar todas"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Logo de formatar tódalas particións,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "perderanse os datos nesas particións"
-
-#~ msgid "Reload"
-#~ msgstr "Recargar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "¿Quere realmente xerar un disquete de instalación para replicar linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuración de ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Cun servidor CUPS remoto, non terá que configurar aquí\n"
-#~ "ningunha impresora, xa que serán detectadas automaticamente,\n"
-#~ "a menos que teña un servidor nunha rede diferente. Neste\n"
-#~ "caso, terá que indicar o enderezo IP do servidor de CUPS\n"
-#~ "e opcionalmente o número de porto."
-
-#~ msgid "Remote queue"
-#~ msgstr "Fila de impresión remota"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#~ msgid "NetWare"
-#~ msgstr "Impresora Netware"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Non foi posible interpretar o contido do ficheiro de configuración."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Ficheiro de configuración non recoñecido"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#~ msgid "Disable network"
-#~ msgstr "Desactivar a rede"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Conexión DSL (ou ADSL)"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Pode especificar directamente o URI para acceder á impresora co CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Si, imprimir unha páxina ASCII de proba"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Si, imprimir unha páxina PostScript de proba"
-
-#~ msgid "Paper Size"
-#~ msgstr "Tamaño do papel"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "¿Extraer a páxina trala impresión?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcións do controlador Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcións da profundidade de cor"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "¿Imprimir texto como PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "¿Corrixir o efecto escaleira?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Número de páxinas por páxina de saída"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marxes dereita/esquerda en puntos (1/72 dunha polgada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marxes superior/inferior en puntos (1/72 dunha polgada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opcións extra do Ghostscript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opcións extra para texto"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverter a orde das páxinas"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccionar a conexión á impresora remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impresora necesita un nome (por exemplo lp).\n"
-#~ "Pódense definir outros parámetros como a descrición da\n"
-#~ "impresora ou a súa localización. ¿Que nome quere usar para\n"
-#~ "esta impresora e como está conectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada fila de impresión (á que se dirixen os traballos de impresión)\n"
-#~ "necesita un nome (frecuentemente lp) e un directorio spool asociado\n"
-#~ "a el. ¿Qué nome e directorio quere que se utilicen para esta fila e como\n"
-#~ "está conectada a impresora?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome da fila"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directorio spool"
-
-#~ msgid "Disable"
-#~ msgstr "Desactivar"
-
-#~ msgid "Enable"
-#~ msgstr "Activar"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Para ter un sistema máis seguro, debería seleccionar \"Usar ficheiro "
-#~ "shadow\"\n"
-#~ "e \"Usar contrasinais MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se a súa rede usa NIS, escolla \"Usar NIS\". Se non o sabe, pregúntelle "
-#~ "ó\n"
-#~ "seu administrador de rede."
-
-#~ msgid "yellow pages"
-#~ msgstr "páxinas amarelas (yp)"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Dns 1 do provedor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Dns 2 do provedor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "¿Como quere conectar á Internet?"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuración do estilo de arrinque"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Vostede pode agora escoller algunhas opcións diversas para o sistema.\n"
-#~ "\n"
-#~ "  - Usar optimizacións de disco duro: esta opción pode mellora-lo "
-#~ "rendemento\n"
-#~ "    do disco duro, pero é só para usuarios avanzados: algúns chipsets que "
-#~ "non\n"
-#~ "    funcionan ben poden estraga-los seus datos. O kernel ten unha lista "
-#~ "negra\n"
-#~ "    de unidades e chipsets, pero se quere evitar sorpresas "
-#~ "desagradables,\n"
-#~ "    deixe esta opción desactivada.\n"
-#~ "\n"
-#~ "  - Escoller un nivel de seguridade: pode escoller un nivel de "
-#~ "seguridade\n"
-#~ "    para o seu sistema. Vaia ó manual para información completa. "
-#~ "Basicamente:\n"
-#~ "    se non sabe cal, escolla \"Medio\"; se quere realmente ter unha "
-#~ "máquina\n"
-#~ "    segura, escolla \"Paranoico\", pero teña coidado: ¡NESTE NIVEL, ROOT "
-#~ "NON\n"
-#~ "    PODE FACER LOGIN NA CONSOLA! Se quere ser root, terá que facer login "
-#~ "como\n"
-#~ "    usuario e entón usar \"su\". Máis xeralmente, non agarde usa-la súa\n"
-#~ "    máquina para outra cousa que non sexa un servidor. Xa foi avisado.\n"
-#~ "\n"
-#~ "  - Tamaño exacto da memoria se se necesita: por desgracia, no mundo "
-#~ "actual\n"
-#~ "    de PCs, non hai un método estándar para preguntarlle á BIOS acerca "
-#~ "da\n"
-#~ "    cantidade de RAM no seu ordenador. Por iso, Linux pode non ser capaz "
-#~ "de\n"
-#~ "    detectar correctamente a cantidade de RAM. Se é o caso, indique a\n"
-#~ "    cantidade correcta. Nota: unha diferencia de 2 ou 4 MB é normal.\n"
-#~ "\n"
-#~ "  - Automonta-las unidades extraíbles: Se vostede prefere non montar\n"
-#~ "    manualmente as unidades extraíbles (CD-ROM, disquete, Zip), "
-#~ "escribindo\n"
-#~ "    \"mount\" e \"umount\", escolla esta opción.\n"
-#~ "\n"
-#~ "  - Activar Bloq Num ó iniciar: Se quere que Bloq Num estea activado\n"
-#~ "    tralo arrinque, escolla esta opción (Nota: Bloq Num pode ou non pode\n"
-#~ "    funcionar nas X)."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Varios"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependencias automáticas"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Tamaño seleccionado %d%s"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Preguntas varias"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Non se pode usar o supermount no nivel de seguridade alto"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "atención: NESTE NIVEL DE SEGURIDADE, A AUTENTICACIÓN DO ROOT NA CONSOLA\n"
-#~ "NON ESTÁ PERMITIDA!  Se quere ser root, terá que conectar coma\n"
-#~ "usuario e logo usar o \"su\".  De xeito máis xeral, non agarde que a\n"
-#~ "máquina actúe doutro modo distinto a un servidor.\n"
-#~ "Xa foi avisado."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Teña coidado, ter o bloqueo numérico activado causa que moitas teclas\n"
-#~ "dean díxitos en vez de letras normais (p.ex: premer `p' dá un `6')"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Desculpe, a configuración do correo aínda non está implementada. Sexa "
-#~ "paciente."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Benvido ó axudante da configuración de rede.\n"
-#~ "¿Que compoñentes desexa configurar?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Acceso a Internet/Rede"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Agora que a conexión á Internet está configurada,\n"
-#~ "o seu ordenador pode ser configurado para compartila.\n"
-#~ "Nota: Necesita un adaptador de rede dedicado para configurar unha rede de "
-#~ "área local (LAN).\n"
-#~ "\n"
-#~ "¿Desexa configurar a compartición da conexión á Internet?\n"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Este script de inicialización tenta cargar os módulos para o rato usb."
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configuración do LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Creación dun disquete de arrinque"
-
-#~ msgid "Choice"
-#~ msgstr "Escolla"
-
-#~ msgid "Actions"
-#~ msgstr "Accións"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Aplicacións científicas"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Ficheiro/Impresión/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "DNS/DHCP "
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "¿Que cargador(es) de arrinque quere usar?"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Zona horaria"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquete de auto-instalación"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Usar diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalizada"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "¿Está seguro de que é un experto? \n"
-#~ "Permitiráselle facer cousas máis potentes pero perigosas.\n"
-#~ "Vánselle preguntar cuestións como: ``¿Usar ficheiro shadow para os "
-#~ "contrasinais?'', ¿está preparado para responder a este tipo de cuestións?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "¿Cal é o uso do seu sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Escolla o tamaño que quere instalar"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Usar ficheiro shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Usar contrasinais MD5"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(pode provocar corrupción dos datos)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Activar Bloq Num ó iniciar"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmar Contrasinal"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Atopouse unha tarxeta RDSI:\n"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "¿Desexa que se tente atopar un módem?"
-
-#~ msgid "Other countries"
-#~ msgstr "Outros países"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "¿En que país se atopa vostede?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Módem alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Módem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Se o seu módem adsl é Alcatel, escolla Alcatel. Doutro xeito, ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "non usar pppoe"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Desactivar a Conexión a Internet"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configurar a conexión a Internet / Configurar a Rede local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "A rede local xa foi configurada.\n"
-#~ "Desexa:"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (importante)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (moi bo)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bo)"
-
-#~ msgid "using module"
-#~ msgstr "usando un módulo"
-
-#~ msgid "Search"
-#~ msgstr "Buscar"
-
-#~ msgid "Package"
-#~ msgstr "Paquete"
-
-#~ msgid "Tree"
-#~ msgstr "Árbore"
-
-#~ msgid "Sort by"
-#~ msgstr "Ordenar por"
-
-#~ msgid "Category"
-#~ msgstr "Categoría"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquetes instalados"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquetes dispoñibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Amosar só as pólas"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandir todos"
-
-#~ msgid "Collapse all"
-#~ msgstr "Pechar todos"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Engadir localización dos paquetes"
-
-#~ msgid "Update location"
-#~ msgstr "Actualizar lugar"
-
-#~ msgid "Configuration: Add Location"
-#~ msgstr "Configuración: Engadir Lugar"
-
-#~ msgid "Find Package"
-#~ msgstr "Buscar Paquete"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Buscar paquete que conteña un ficheiro"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Trocar entre Instalado e Dispoñible"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Comprobando dependencias"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Os seguintes paquetes van ser desinstalados"
-
-#~ msgid "Regexp"
-#~ msgstr "Expr.Reg"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Que paquetes buscar"
-
-#~ msgid "No match"
-#~ msgstr "Sen coincidencias"
-
-#~ msgid "No more match"
-#~ msgstr "Non hai máis coincidencias"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake está en modo ``baixa memoria''.\n"
-#~ "Vaise reiniciar rpmdrake para permitir a busca de ficheiros"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "¿Que ficheiro está a buscar?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "¿Que está a buscar?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Dea un nome (ex: `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directorio"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Non hai cdrom dispoñible (nada en /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL do directorio que contén os RPMs"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Para FTP e HTTP, ten que indicar o lugar de hdlist\n"
-#~ "Ten que ser relativo á URL anterior"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Por favor, envíe a seguinte información"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s xa está en uso"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Actualizando a base de RPMs"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Vaise borra-la entrada %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Buscando as pólas"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "A busca das pólas leva un tempo"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulación de Gráficos"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, bibliotecas, ferramentas"
-
-#~ msgid "Development applications"
-#~ msgstr "Aplicacións de desenvolvemento"
-
-#~ msgid "Sciences"
-#~ msgstr "Ciencias"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programas de Chat (IRC ou mensaxería instantánea) como o xchat, licq, "
-#~ "gaim e ferramentas de transferencia de ficheiros"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Facilidades de Comunicación"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Development other"
-#~ msgstr "Outros de desenvolvemento"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clientes e servidores de Bases de Datos (mysql e postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Desenvolvemento en C/C++"
-
-#~ msgid "Czech"
-#~ msgstr "Checo"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "¿A qué porto serie está conectado o rato?"
diff --git a/perl-install/share/po/help_xml2pm.pl b/perl-install/share/po/help_xml2pm.pl
deleted file mode 100755
index 932b5943f..000000000
--- a/perl-install/share/po/help_xml2pm.pl
+++ /dev/null
@@ -1,218 +0,0 @@
-#!/usr/bin/perl -w
-
-use XML::Parser;
-use MDK::Common;
-
-my $help;
-my $dir = "doc/manual/literal/drakx";
-my $xsltproc = "/usr/bin/xsltproc";
-
-if ( ! -x "$xsltproc" ){
-    print "You need to have \"$xsltproc\" - ";
-    print "so type \"urpmi libxslt-proc\" please.\n";
-    exit 1;
-}
-my @langs = grep { /^..$/ && -e "$dir/$_/drakx-help.xml" } all($dir) or die "no XML help found in $dir\n";
-
-my %helps = map {
-    my $lang = $_;
-    my $p = new XML::Parser(Style => 'Tree');
-    open F, "$xsltproc id.xsl $dir/$lang/drakx-help.xml|";
-    my $tree = $p->parse(*F);
-
-    $lang => rewrite2(rewrite1(@$tree), $lang);
-} @langs;
-
-my $base = delete $helps{en} || die;
-save_help($base);
-
-foreach my $lang (keys %helps) {
-    print "Now transforming: $lang\n";
-    local *F;
-    my ($charset) = cat_("$lang.po") =~ /charset=([^\\]+)/ or die "missing charset in $lang.po\n";
-    open F, "| iconv -f utf8 -t $charset//TRANSLIT > help-$lang.pot";
-    #open F, "|cat - > help-$lang.pot";
-    print F "\n";
-    foreach my $id (keys %{$helps{$lang}}) {
-	$base->{$id} or die "$lang:$id doesn't exist in english\n";
-	print F qq(# DO NOT BOTHER TO MODIFY HERE, SEE:\n# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/$lang/drakx-help.xml\n);
-	print F qq(msgid ""\n");
-	print F join(qq(\\n"\n"), split "\n", $base->{$id});
-	print F qq("\nmsgstr ""\n");
-	print F join(qq(\\n"\n"), split "\n", $helps{$lang}{$id});
-	print F qq("\n\n);
-    }
-}
-unlink(".memdump");
-
-sub save_help {
-    my ($help) = @_;
-    local *F;
-    open F, "| LC_ALL=fr iconv -f utf8 -t ascii//TRANSLIT > ../../help.pm";
-    print F q{package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated 
-#            from the manuals !!! 
-#            Write a mail to <documentation@mandrakesoft.com> if
-#            you want it changed.
-
-%steps = (
-empty => '',
-};
-    print F qq(
-$_ => 
-__("$help->{$_}"),
-) foreach sort keys %$help;
-    print F ");\n";
-}
-
-# i don't like the default tree format given by XML::Parser,
-# rewrite it in my own tree format
-sub rewrite1 {
-    my ($tag, $tree) = @_;
-    my ($attr, @nodes) = @$tree;
-    my @l;
-    while (@nodes) {
-	my ($tag, $tree) = splice(@nodes, 0, 2);
-	if ($tag eq '0') {
-	    foreach ($tree) {
-		s/\s+/ /gs;
-		s/"/\\"/g;
-	    }
-	    push @l, $tree
-	} elsif ($tag eq 'screen') {
-	    $tree->[1] eq '0' or die "screen tag contains non CDATA\n";
-	    push @l, $tree->[2];
-	} else {
-	    push @l, rewrite1($tag, $tree);
-	}
-    }
-    { attr => $attr, tag => lc $tag, children => \@l };
-}
-
-# return the list of nodes named $tag
-sub find {
-    my ($tag, $tree) = @_;
-    if (!ref($tree)) {
-	();
-    } elsif ($tree->{tag} eq $tag) {
-	$tree;
-    } else {
-	map { find($tag, $_) } @{$tree->{children}};
-    }
-}
-
-sub rewrite2 {
-    use utf8;
-    my ($tree, $lang) = @_;
-    our $i18ned_open_text_quote  = $ {{ 
-	fr => "« ",
-	de => "„",
-	es => "\\\"",
-	it => "''",
-	}}{$lang};
-    our $i18ned_close_text_quote = $ {{ 
-	fr => " »",
-	de => "“",
-	es => "\\\"",
-	it => "''",
-	}}{$lang};
-    our $i18ned_open_label_quote  = $ {{ fr => "« ", de => "„"}}{$lang};
-    our $i18ned_close_label_quote = $ {{ fr => " »", de => "“"}}{$lang};
-    our $i18ned_open_command_quote  = $ {{ fr => "« ", de => "„"}}{$lang};
-    our $i18ned_close_command_quote = $ {{ fr => " »", de => "“"}}{$lang};
-    our $i18ned_open_input_quote  = $ {{ fr => "« ", de => "»"}}{$lang};
-    our $i18ned_close_input_quote = $ {{ fr => " »", de => "«"}}{$lang};
-    our $i18ned_open_key_quote  = $ {{ de => "["}}{$lang};
-    our $i18ned_close_key_quote = $ {{ de => "]"}}{$lang};
-    # rewrite2_ fills in $help
-    $help = {};
-    rewrite2_($tree);
-    $help;
-}
-
-sub rewrite2_ {
-    my ($tree) = @_;
-    ref($tree) or return $tree;
-
-    my $text = do {
-	my @l = map { rewrite2_($_) } @{$tree->{children}};
-	my $text = "";
-	foreach (grep { !/^\s*$/ } @l) {
-	    s/^ // if $text =~ /\s$/;
-	    $text =~ s/ $// if /^\s/;
-	    $text =~ s/\n+$// if /^\n/;
-	    $text .= $_;
-	}
-	$text;
-    };
-
-    if (0) {
-    } elsif (member($tree->{tag}, 'formalpara', 'para', 'itemizedlist', 'orderedlist')) {
-	$text =~ s/^\s(?!\s)//;
-	$text =~ s/^( ?\n)+//;
-	$text =~ s/\s+$//;
-	qq(\n$text\n);
-    } elsif (member($tree->{tag}, 'quote', 'citetitle', 'foreignphrase')) {
-	($i18ned_open_text_quote || "``") . $text . ($i18ned_close_text_quote || "''");
-    } elsif (member($tree->{tag}, 'guilabel', 'guibutton', 'guimenu', 'literal', 'filename')) {
-	($i18ned_open_label_quote || "\\\"") . $text . ($i18ned_close_label_quote || "\\\"");
-    } elsif ($tree->{tag} eq 'command') {
-	($i18ned_open_command_quote || "\\\"") . $text . ($i18ned_close_command_quote || "\\\"");
-    } elsif ($tree->{tag} eq 'userinput') {
-	($i18ned_open_input_quote || ">>") . $text . ($i18ned_close_input_quote || "<<");
-    } elsif ($tree->{tag} eq 'keycap') {
-	($i18ned_open_key_quote || "[") . $text . ($i18ned_close_key_quote || "]");
-    } elsif (member($tree->{tag}, 'keysym')) {
-	qq($text);
-    } elsif (member($tree->{tag}, 'footnote')) {
-	'(*)'
-    } elsif ($tree->{tag} eq 'warning') {
-	$text =~ s/^(\s+)/$1!! /;
-	$text =~ s/(\s+)$/ !!$1/;
-	$text;
-    } elsif ($tree->{tag} eq 'listitem') {
-	my $cnt;
-	$text =~ s/^\s+//;
-	$text =~ s/^/' ' . ($cnt++ ? '  ' : '* ')/emg;
-	"\n$text\n";
-
-    } elsif (member($tree->{tag},  
-		    'acronym', 'application', 'emphasis',  
-		    'keycombo', 'note', 
-		    'superscript', 'systemitem', 
-		    'tip', 'ulink', 'xref' 
-		   )) {
-	# ignored tags
-	$text;
-    } elsif (member($tree->{tag},
-		    'title', 'article', 'primary', 'secondary', 
-		    'indexterm', 
-		   )) {
-	# dropped tags
-	'';
-    } elsif ($tree->{tag} eq 'sect1') {
-	$text =~ s/^\s+//;
-
-	my @footnotes = map { 
-	    my $s = rewrite2_({ %$_, tag => 'para' });
-	    $s =~ s/^\s+//;
-	    "(*) $s";
-	} find('footnote', $tree);
-	$help->{$tree->{attr}{id}} = aerate($text . join('', @footnotes));
-	'';
-    } elsif ($tree->{tag} eq 'screen') {
-	qq(\n$text\n);
-    } else {
-	die "unknown tag $tree->{tag}\n";
-    }
-}
-
-sub aerate {
-    my ($s) = @_;
-    #- the warp_text column is adjusted so that xgettext do not wrap text around
-    #- which cause msgmerge to add a lot of fuzzy
-    my $s2 = join("\n\n", map { join("\n", warp_text($_, 75)) } split "\n", $s);
-    $s2;
-}
diff --git a/perl-install/share/po/hr.po b/perl-install/share/po/hr.po
deleted file mode 100644
index 20347847b..000000000
--- a/perl-install/share/po/hr.po
+++ /dev/null
@@ -1,11819 +0,0 @@
-# KTranslator Generated File
-# Copyright (c) 1999 MandrakeSoft
-# Vladimir Vuksan <vuksan@veus.hr>, 1999.
-# Vlatko Kosturjak <kost@iname.com>, 2001.
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 06:59CET\n"
-"Last-Translator: Vlatko Kosturjak <kost@iname.com>\n"
-"Language-Team: Croatian <lokalizacija@linux.hr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Podesi sve zaslone nezavisno"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama pro¹irenje"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Podesi samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Vi¹e-zaslonska postava"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Va¹ sustav podr¾ava postavu sa vi¹e zaslona.\n"
-"©to ¾elite napraviti?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafièka kartica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Odaberite grafièku karticu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Odaberite X poslu¾itelj"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X poslu¾itelj"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Odaberite X upravljaèki program"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X upravljaèki program"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree-a ¾elite imati?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a video kartica mo¾e imati 3D ubrzanje samo sa XFree %s.\n"
-"Va¹a kartica je podr¾ana od XFree %s koji mo¾da ima bolju podr¹ku u 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va¹a kartica mo¾e imati 3D hardware-sku akceleraciju sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardware akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va¹a kartica mo¾e imati 3D hadware akceleraciju podr¾anu od XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODR©KA I MO®E ZAMRZNUTI VA©E "
-"RAÈUNALO."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EXPERIMENTALNOM 3D hardware akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a video kartica mo¾e imati 3D ubrzanje samo sa XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODR©KA I MO®E ZAMRZNUTI VA©E "
-"RAÈUNALO.Va¹a kartica je podr¾ana od XFree %s koja mo¾e imati bolju podr¹ku "
-"u 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalacijski zaslonski upravljaèki program)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree postavke"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Odaberite kolièinu memorije na grafièkoj kartici"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Postavke poslu¾itelja"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Odaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritièna parametra su vertikalna vrijednost osvje¾avanja, koja je "
-"vrijednost\n"
-"u kojoj se cijeli zaslon osvje¾ava, i najva¾nije horizontalna\n"
-"vrijednost osvje¾avanja koja ja vrijednost u kojoj se svaka linija "
-"prikazuje.\n"
-"\n"
-"JAKO JE VA®NO da ne specifirate tip monitora kod kojega je raspon "
-"osvje¾avanja\n"
-"veæi od moguænosti va¹eg monitora jer mo¾ete o¹tetiti va¹ monitor.\n"
-" Ukoliko ste u nedoumici, izaberite konzervativne postavke."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna vrijednost osvje¾avanja"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalna vrijednost osvje¾avanja"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Niste podesili monitor"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Niste podesili grafièku karticu"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Niste podesili rezoluciju"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Da li ¾elite isku¹ati postavu ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje grafièke kartice mo¾e zamrzunti va¹e raèunalo"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Isku¹aj postavu"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"provjerite parametre koje ste unjeli"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Pojavila se gre¹ka:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Zatvaram nakon %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Pojavila se gre¹ka, provjerite parametre koje ste unjeli"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Odaberite rezoluciju  i color depth"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafièka kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 poslu¾itelj: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Vi¹e"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "U redu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Poka¾i sve"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tipkovnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Vrsta mi¹a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Ureðaj mi¹a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontalna Sinkronizacija Monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikalno Osvje¾enje Monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafièka kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafièke kartice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafièka memorija: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boje: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 poslu¾itelj: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 upravljaèki program: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pripremam X-Window postavu"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "©to ¾elite napraviti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Promijeni monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Promijeni grafièku karticu"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Promijeni postavke poslu¾itelja"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Promijeni rezoluciju"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Prika¾i informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Isku¹aj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Zavr¹i"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zadr¾i promjene?\n"
-"Trenutna postava je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X kod pokretanja sustava"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mogu podesiti da se X podigne automatski kod podizanja sustava.\n"
-"Da li ¾elite da se X automatski pokreæe?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molim ponovo se logirajte u %s kako bi aktivirali promjenjeno"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim prvo se odjavite te pritisnite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisuæa boja (15 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisuæa boja (16 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijuna boja (24 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ili vi¹e"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibilan, 1024x768 na 87 Hz s preplitanjem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz s preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Pro¹ireni Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Bez preplitanja SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visoko frekvencijski SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji ide do 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji ide do 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor pogona (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje ¾elite instalirati bootloader?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafièkim menijem"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Podizanje sa DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne postavke bootloadera"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Koristiti Bootloader"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot ureðaj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOSima)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Zbijeno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "zbijeno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Odgoda prije bootiranja uobièajenog imagea"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Lozinka"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Lozinka (provjera)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ogranièene opcije na komandnoj liniji"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ogranièi"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Oèisti /tmp na svakom podizanju"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna velièina RAMa (pronaðeno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omoguæi vi¹e obrazaca"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Upi¹ite velièinu RAM u Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Postavka ``Ogranièene opcije na komandnoj liniji'' nema svrhe ako ne unesete "
-"lozinku"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Molim poku¹ajte ponovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Lozinke se ne podudaraju"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init poruka"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Pauza Otvorenog Firmware-a"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Vrijeme èekanja podizanja kernela"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Omoguæi CD podizanje?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Omoguæi podizanje?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Uobièajeni OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Odluèili ste instalirati bootloader na particiju.\n"
-"To podrazumijeva da veæ imate bootloader na tvrdom disku sa kojeg podi¾ete\n"
-"sustav (npr. System Commander).\n"
-"\n"
-"Sa kojeg diska ¾elite podizati?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ovo su trenutni zapisi.\n"
-"Mo¾ete dodati jo¹ koji ili urediti postojeæi."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gotov"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Promjeni"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kakvu vrstu zapisa ¾elite dodati"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Drugi OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Drugi OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Drugi OS (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Slika (image)"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Dodaj na kraj"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Èitaj-pi¹i"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tablica"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Oznaka"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Uobièajeno"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-velièina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NemaVidea"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ukloni zapis"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Morate odrediti sliku kernela"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Morate odrediti root particiju"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ova oznaka veæ postoji"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Prona¹ao sam %s %s meðusklopova"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Da li imate jo¹ koji?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Da li imate %s meðusklopova?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Poka¾i info o hardveru"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram upravljaèki program %s za karticu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s upravljaèki program ¾elite isprobati?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim sluèajevima, %s upravljaèki program treba dodatne informacije da bi "
-"radio\n"
-"ispravno, iako normalno radi i bez toga. Da li ¾elite specifirati te "
-"dodatne\n"
-"opcije za njega ili ¾elite dozvoliti upravljaèkom programu da isproba va¹e\n"
-"raèunalo za informacije koje treba? Ponekad, isprobavanje mo¾e zamrznuti\n"
-"va¹e raèunlo, ali ne bi trebalo izazvati nikakvu ¹tetu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Auto. ispitaj"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Odredi postavke"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sada mo¾ete unijeti opcije za modul %s.\n"
-"Primjetite da svaka adresa treba biti une¹ena sa prefiksom 0x kao '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada mo¾ete unijeti postavke za modul %s.\n"
-"Postavke su formata ``ime=vrijednost ime2=vrijednost2...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Postavke modula:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Uèitavanje modula %s nije uspjelo.\n"
-"Da li ¾elite poku¹ati ponovo sa drugim parametrima?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pristup administracijskim datotekama"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(veæ postoji %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Lozinka je prejednostavna"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Molim dajte korisniku korisnièko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisnièko ime mo¾e sadr¾avati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ovaj korisnik veæ postoji"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Puno ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Korisnièko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Ljuska"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Auto-prijava"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mogu podesiti da se va¹e raèunalo automatski prijavi kao jedan korisnik.\n"
-"Da li ¾elite koristiti tu pogodnost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izaberite uobièajenog korisnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izaberite prozorski upravitelj koji ¾elite pokrenuti:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Molim izaberite jezik koji ¾elite koristiti."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Mo¾ete izabrati druge jezike koji æe biti dostupni nakon instalacije"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Sve"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Prilagoðeno"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nema dijeljenja"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba instalirati. Da li ga ¾elite instalirati?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Mo¾ete izvesti koristeæi NFS ili Sambu. Koji od njih ¾elite"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nu¾ni paket %s nedostaje"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Da li ¾elite dozvoliti korisnicima da izvezu neke direktorije u "
-"njihivompolaznom direktoriju?\n"
-"Dozvoljavanjem navedenoga æete dozvoliti korisnicima da jednostavno kliknuna "
-"\"Dijeljenje\"\n"
-" u konqueroru i nautilusu.\n"
-"\n"
-"\"Proizvoljno\" æe omoguæiti dozvoljavanje po korisniku.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Odustani"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Dijeljenje po korisniku koristi grupu \"fileshare\". \n"
-"Mo¾ete koristiti userdrake za dodavanje korisnika u navedenu grupu."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dobrodo¹li Crackeri"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Slab"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardno"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Visok"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Vi¹i"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidan"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ova razina se treba koristiti sa pa¾njom. Ona èini va¹ sustav mnogo lak¹im "
-"za kori¹tenje,\n"
-"ali vrlo osjetljiv: ne smije biti kori¹ten za raèunala koja su povezana u "
-"mre¾i ili na Internet. Naime, nema lozinke za pristup."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lozinke su sada ukljuèene meðutim jo¹ ne preporuèam kori¹tenje ovog raèunala "
-"u mre¾nom okoli¹u."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardna sigurnosna razina preporuèena za raèunala koja æe biti "
-"kori¹tena za spajanje na Internet kao klijent."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Veæ postoje neka ogranièenja i vi¹e automatskih provjera se pokreæe svake "
-"noæi."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Sa ovom sigurnosnom razinom, kori¹tenje ovog sustava kao poslu¾itelj postaje "
-"moguæe.\n"
-"Sigurnost je sada toliko visoka da se sustav mo¾e koristiti kao poslu¾itelj\n"
-"koji prima zahtjeve od mnogo klijenata. Upozorenje: ako je va¹e raèunalo "
-"samo klijent na Internetu, bolje da izaberete ni¾u razinu."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Temeljeno na prija¹njoj razini, ali je sustav potpuno zatvoren.\n"
-"Sigurnosne znaèajke su na maksimumu."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izaberite sigurnosni nivo"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sigurnosna razina"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za poslu¾itelje"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja ¹titi od prekoraèenja spremnika i format string napada."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobro dosli u %s izbornik operativnih sustava!\n"
-"\n"
-"Izaberite operativni sustav u popisu iznad ili\n"
-"prièekajte %d sekundi za uobièajeno podizanje.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro dosli u GRUB izbornik operativnih sustava!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Za mijenjanje izabranog sustava pritisnite tipke %c i %c."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite ENTER za bootiranje izabranog OS, 'e' za promjenu"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "naredbe prije bootiranja ili 'c' za komandnu liniju."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljeni zapis biti æe bootiran automatski za %d sekundi."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nema dovoljno mjesta u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Radna povr¹ina"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne mo¾ete instalirati bootloader na %s particiju\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nema jo¹ implementirane pomoæi.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Novi stil kategoriziranja Monitora"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NoviStil Monitora"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Auroru pri podizanju"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao Upravitelj Boot-a.\n"
-"Pritisnite na Podesi za pokretanje èarobnjaka za postavljanje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemski mod"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sustav pri podizanju"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ne ¾elim automatsko prijavljivanje"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, ¾elim automatsko prijavljivanje sa ovim korisnikom i okru¾jem"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "U redu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za èitanje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti screenshotove prije particioniranja"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshotovi æe biti raspolo¾ivi poslije instalaciju u %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francuska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kosta Rika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgija"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Èe¹ka Republika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Njemaèka"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grèka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norve¹ka"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "©vedska"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozemska"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italija"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Sjedinjene Amerièke Dr¾ave"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Prvo napravite backup podataka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Proèitajte pa¾ljivo!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ukoliko ¾elite koristiti aboot morate ostaviti dovoljno mjesta (npr. 2048 "
-"sektora) na\n"
-"poèetku diska"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Gre¹ka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Èarobnjak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Va¹ sustav sadr¾i samo jednu veliku particiju.\n"
-"(Microsoft DOS/Windows obièno koristi jednu particiju).\n"
-"Preporuèam da promijenite velièinu particije\n"
-"(kliknite prvo na particiju te onda na \"Promijeni velièinu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Molim kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ostali"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Vrste datoteènih sustava:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Napravi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Vrsta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Umjesto toga koristi ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Obri¹i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Prvo pritisnite ``Demontiraj''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja tipa particije %s svi podaci na ovoj particiji biti æe "
-"obrisani"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izaberite particiju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izaberite drugu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normalno > Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Vrati"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Da ipak nastavim?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Da zavr¹im bez spremanja"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Da zavr¹im bez zapisivanje particijske tablice?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Da li ¾elite spremiti /etc/fstab promjene?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Raspodijeli automatski"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Oèisti sve"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Hard disk informacije"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su iskori¹tene"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati niti jednu dodatnu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ako ¾elite dodati jo¹ koju particiju molim obri¹ite jednu od particija kako "
-"bi\n"
-"mogli stvoriti jednu extended particiju."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Spremi particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Vrati particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Spasi particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ponovno uèitaj particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje prenosivog medija"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Odaberite datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup particijske tablice nema istu velièinu\n"
-"Da ipak nastavim?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Umetnite disketu u pogon\n"
-"Svi podaci na disketi biti æe izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Poku¹avam spasiti particijsku tablicu"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Toèka montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Promijeni velièinu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premjesti"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj RAID-u"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj LVM-u"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAID-a"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVM-a"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Promijeni RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Stvori novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Poèetni sektor:"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Velièina u MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Vrsta datoteènog sustava:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Mjesto montiranja:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Postavke:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mijenjam tip particije"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Koji datoteèni sustav ¾elite?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Mijenjam iz ext2 u ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdje ¾elite montirati loopback datoteku %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje ¾elite montirati ureðaj %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu maknuti toèku za montiranje zato ¹to se ova particija koristi za "
-"loop back.\n"
-"Uklonite loopback prvo"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Izraèunavam granice fat datoteènog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mijenjam velièinu"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ova particija nije promjenjiva u velièini"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Preporuèam da prvo backupirate sve podatke s ove particije"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja velièine particije %s svi podaci na ovoj particiji biti æe "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Odaberite novu velièinu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nova velièina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk se ¾elite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji se sektor ¾elite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Premje¹tam"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Premje¹tam particiju..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeæi RAID na koji ¾elite dodati "
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeæi LVM na koji ¾elite dodati "
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ime?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne mo¾e koristiti za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Ime loopback datoteke:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dajte ime datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Datoteku koristi neki drugi loopback. Molim izaberite neku drugu datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka veæ postoji. Da li da nju upotrijebim?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Razno"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ureðaj"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "razina"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "chunk velièina"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kakav tip particioniranja?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"®alim meðutim ne mogu napraviti /boot toliko daleko na disku\n"
-"(cilindar > 1024).\n"
-"Imate dvije opcije ili æete koristiti LILO pa neæe raditi ili neæete\n"
-"koristiti LILO pa vam /boot neæe ni trebati."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particiju koju ste odabrali kao root (/) je fizièki locirana poslije 1024-"
-"tog cilindra va¹eg hard diska, a nemate /boot particiju.\n"
-"Ukoliko planirate koristiti LILO boot menad¾er, budite pa¾ljivi da dodate/"
-"boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softwaresku RAID particiju kao root (/).\n"
-"Nema bootloader-a koji je u moguænosti to podr¾ati bez /boot particije.\n"
-"Zato budite pa¾ljivi da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Particijska tablica pogona %s æe sada biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Trebate ponovo pokrenuti sustav prije nego promjene postanu aktivne"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s svi podaci na ovoj particiji biti æe obrisani"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiram"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sakrij datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Premijesti datoteku na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s veæ sadr¾i neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Premije¹team datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je sada poznata kao %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Ureðaj:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ureðaj slovo: %s (nagaðanje)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Vrsta: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Poèetak: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Velièina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nije formatiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Podrazumijevana boot particija\n"
-"  (za MS-DOS boot, ne za LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Razina %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk velièina %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Ime loopback datoteke: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"©anse su, da je ova particija\n"
-"ustvari particija upravljaèkog programa, vjerojatno\n"
-"biste ju trebali ostaviti.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova specijalna bootstrap\n"
-"particija je za\n"
-"dvostruko-podizanje (dual-boot) va¹eg sustava.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velièina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Vrsta particijske tabele: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na sabirnici %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Kljuè enkriptiranja datoteènog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite va¹ kljuè za enkriptiranje datoteènog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Upisani enkripcijski kljuè je prejednostavan (mora biti dug najmanje %d "
-"znakova)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Enkripcijski kljuèevi se ne sla¾u"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Enkripcijski kljuè"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Enkripcijski kljuè (ponovno)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Promijeni tip"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Molim kliknite na medij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Poslu¾itelji za pretra¾ivanje"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne znam kako formatirati %s kao vrstu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktorij %s neuspje¹no"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck neuspje¹an sa izlaznim kodom %d ili signalom %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gre¹ka kod demontiranja %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "sa /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "poslu¾itelj"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS se ne mo¾e koristiti na particijama koje su manje od 16 MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS se ne mo¾e koristiti na particijama koje su manje od 32 MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Mjesto montiranja mora poèeti sa /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Veæ postoji particija sa mjestom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne mo¾ete koristiti LVM logièki prostor za mjesto montiranja %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij bi trebao ostati unutar root datoteènog sustava"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Treba vam istinski datoteèni sustav (ex2, reiserfs) za ovo mjesto "
-"montiranja\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Ne mo¾ete koristiti enkriptirani datoteèni sustav za toèku montiranja %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno slobodnog prostora za auto-alokaciju"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nema ni¹ta za uraditi"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gre¹ka prilikom otvaranja %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Pojavila se gre¹ka - ne mogu pronaæi niti jedan valjani ureðaj na kojem\n"
-"bih mogao instalirati datoteèni sustav. Provjerite da li je sa va¹im "
-"hardverom sve u redu."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemate niti jednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je vi¹ekorisnièki sustav, i to znaèi da svaki korisnik mo¾e imati\n"
-"vlastita pode¹enja, vlastite datoteke itd. Mo¾ete proèitati ``User Guide''\n"
-"da nauèite vi¹e. Za razliku od \"root\"-a, koji je administrator, korisnici\n"
-"koje æete dodati ovdje neæe imati ovla¹tenja za mijenjanje nièega osim "
-"vlastitih\n"
-"datoteka ili vlastitih postavki. Morati æete napraviti najmanje jednog "
-"normalnog\n"
-"korisnika za vas. Taj raèun æete koristiti za prijavljivanje za rutinsko\n"
-"kori¹tenje. Iako je vrlo praktièno se prijaviti kao \"root\" svaki dan,\n"
-"to mo¾e biti vrlo opasno! Najmanja pogre¹ka mo¾e znaèiti da va¹ sustav\n"
-"neæe vi¹e moæi raditi. Ako napravite ozbiljnu gre¹ku kao normalan korisnik,\n"
-"mo¾ete izgubiti samo neke informacije, ali ne cijeli sustav.\n"
-"\n"
-"Prvo, morate unijeti va¹e pravo ime. Ono nije obvezno, naravno\n"
-"mo¾ete ustvari unijeti ¹to god ¾elite. DrakX æe tada uzeti prvu rijeè koju\n"
-"ste unijeli u to polje i prenijeti je u \"Korisnièko ime\". To je ime kojim "
-"æe \n"
-"se taj konkretni korisnik prijavljivati u sustav. Mo¾ete ga mijenjati. "
-"Tada \n"
-"morate ovdje upisati lozinku. Sa gledi¹ta sigurnosti, lozinka "
-"neprivilegiranog \n"
-"(obiènog) korisnika nije toliko va¾na kao \"root\" lozinka, ali je ne treba "
-"zbog\n"
-"toga zanemarivati: naposlijetku, radi se o va¹im datotekama.\n"
-"\n"
-"Ako pritisnete \"Prihvati korisnika\", mo¾ete ih dodati koliko ¾elite. "
-"Dodajte\n"
-"korisnika za svakog prijatelja: oca ili sestru, npr. Kada ste dodali sve "
-"korisnike\n"
-"koje ste ¾eljeli, stisnite \"Zavr¹i\".\n"
-"\n"
-"Pritiskanjem na \"Napredno\" mo¾ete promijeniti predodreðenu \"ljusku\" za "
-"tog\n"
-"korisnika (bash je predodreðen)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Gore su popisane postojeæe Linux particije pronaðene na\n"
-"va¹em hard disku. Mo¾ete zadr¾ati izbore napravljene od strane èarobnjaka, "
-"one su dobre za\n"
-"uobièajenu upotrebu. Ukoliko promjenite izbore, morate barem definirati "
-"root\n"
-"particiju (\"/\"). Nemojte izabrati premalu particiju jer neæete moæi \n"
-"instalirati dovoljno software-a. Ako ¾elite spremati va¹e podatke na "
-"posebnoj particiji,\n"
-"trebate takoðer izabrati \"/home\" (jedino moguæe ako imate vi¹e od jedne\n"
-"raspolo¾ive Linux particije).\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi: \"Ime\", "
-"\"Kapacitet\".\n"
-"\n"
-"\n"
-"\"Ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-" * \"a\" znaèi \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" znaèi \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" znaèi \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" znaèi \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znaèi \"primarni hard disk\", \"b\" znaèi "
-"\"sekundarni hard disk\", itd..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalacija je pro¹irena na nekoliko CDROMova. DrakX\n"
-"zna ukoliko se odabrani paket nalazi na drugom CDROMu i izbaciti æe\n"
-"trenutni CD i pitati vas da ubacite drugi koji je potreban."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sada treba odrediti koje programe ¾elite instalirati u svoj sustav. Za "
-"Mandrake \n"
-"Linux su dostupne tisuæe paketa, i ne morate ih sve znati na pamet.\n"
-"\n"
-"Ako pokreæete standarnu instalaciju sa CD-ROMa, prvo æete biti upitani da "
-"navedete\n"
-"CDove koje imate (samo u modu za struènjake). Provjerite imena CDova i "
-"oznaèite\n"
-"kuæice koje odgovaraju CDovima koje imate. Pritisnite \"U redu\" kada ste "
-"spremni\n"
-"nastaviti.\n"
-"\n"
-"Paketi su podijeljeni po grupama koje odgovaraju odreðenoj svrsi. Grupe su \n"
-"podijeljene u èetiri sekcije:\n"
-"\n"
-" * \"Radna stanica\": ako æete koristiti stroj kao radnu stanicu, izaberite\n"
-"jednu ili vi¹e odgovarajuæih grupa;\n"
-"\n"
-" * \"Razvoj\": ako æe se Va¹ stroj koristiti za programiranje, izaberite\n"
-"¾eljene grupe;\n"
-"\n"
-" * \"Poslu¾itelj\": ako je Va¹ stroj odreðen za poslu¾itelja, moæi æete "
-"odabrati\n"
-"koje od uobièajenih servisa ¾elite instalirati na njega;\n"
-"\n"
-" * \"Grafièko okru¾je\": naposlijetku, ovdje birate grafièko okru¾je. Barem "
-"jedno\n"
-"mora biti odabrano ako ¾elite imati grafièku radnu stanicu!\n"
-"\n"
-"Pomicanjem pokazivaèa mi¹a na ime grupe æe se prikazati kratak opis te "
-"grupe. Ako\n"
-"nijedna grupa nije odabrana pri normalnoj instalaciji (za razliku od "
-"nadogradnje),\n"
-"iskoèit æe dijalog sa predlo¾enim opcijama za minimalnu instalaciju:\n"
-"\n"
-" * \"Sa Xima\": instaliranje ¹to je manje paketa moguæe za grafièko "
-"suèelje;\n"
-"\n"
-" * \"Sa osnovnom dokumentacijom\": instalira osnovni sustav sa osnovnim "
-"pomoænim\n"
-"programima i njihovom dokumentacijom. Ova instalacija je pogodna za "
-"namje¹tanje\n"
-"poslu¾itelja;\n"
-"\n"
-" * \"Stvarno malena instalacija\": instalirat æe strogi minimum potreban da "
-"bi\n"
-"imali Linux sustav koji radi, samo u komandnoj liniji. Ova instalacija je "
-"velika\n"
-"oko 65Mb.\n"
-"\n"
-"Mo¾ete provjeriti \"Inividualni odabir paketa\", ¹to je korisno ako ste "
-"upoznati\n"
-"sa ponuðenim paketima ili ako ¾elite imati potpunu kontrolu nad "
-"instaliranim\n"
-"sadr¾ajem.\n"
-"\n"
-"Ako ste pokrenuli instalaciju u \"Nadogradnja\" naèinu, mo¾ete odselektirati "
-"sve\n"
-"grupe da izbjegnete instaliranje novih paketa. Ovo je korisno za "
-"popravljanje\n"
-"ili osuvremenjivanje postojeæeg sustava."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Konaèno, ovisno o tome da li ste izbrali individualne pakete, prikazat æe "
-"vam \n"
-"se stablo sa svim paketima podijeljenim u grupe i podgrupe. Pri "
-"pregledavanju\n"
-"stabla mo¾ete izabrati èitave grupe, podgrupe ili pojedine pakete.\n"
-"\n"
-"Kad god izaberet paket na stablu, na desnoj strani se pojavi opisnik. Kada "
-"ste\n"
-"zavr¹ili odabir, pritisnite \"Instaliraj\", èime æete pokrenuti proces "
-"instaliranja.\n"
-"Ovisno o brzini raèunala i broju paketa koji trebaju biti instalirani, "
-"proces mo¾e\n"
-"potrajati. Procjena vremena koje æe biti potrebno da bi se sve instaliralo "
-"pi¹e\n"
-"na ekranu, da vam pomogne procjeniti imate li vremena za ¹alicu kave.\n"
-"\n"
-"!! Ako je odabran poslu¾iteljski paket, namjerno ili jer je pripadao nekoj "
-"grupi,\n"
-"bit æete upitani da potvrdite da li ¾elite stvarno instalirati te "
-"poslu¾itelje.\n"
-"Kod Mandrake Linuxa, svi instalirani poslu¾itelji se pokreæu prilikom "
-"podizanja\n"
-"sustava. Èak iako su sigurni, bez poznatih problema u vrijeme izlaska "
-"distribucije,\n"
-"mo¾e se dogoditi da se otkriju sigurnosne rupe nakon zgotovljenja ove "
-"inaèice\n"
-"Mandrake Linuxa. Ako ne znate ¹to bi pojedini servis trebao raditi ili "
-"za¹to \n"
-"se instalira, pritisnite \"Ne\". Pritiskanjem na \"Da\"instalirat æe se "
-"navedeni\n"
-"servisi i pokretat æe se automatski. !!\n"
-"\n"
-"\"Automatske ovisnosti\" opcija onemoguæuje upozorenje koje se pojavi kad "
-"god \n"
-"instalacija automatski izabere paket. Ovo se de¹ava stoga ¹to je utvrdila "
-"da\n"
-"treba zadovoljiti ovisnost drugim paketom da bi se uspje¹no zavr¹ila.\n"
-"\n"
-"Malena ikona diskete na dnu popisa omoguæuje uèitavanje popisa paketa "
-"izabranih\n"
-"tijekom neke pro¹le instalacije. Pritiskom na nj upitat æe vas da ubacite "
-"disketu\n"
-"napravljenu na kraju neke druge instalacije. Pogledajte drugi savjet u "
-"posljednjem\n"
-"koraku stvaranja takve diskete."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Predlo¾eno Vam je da namjestite Internet/mre¾nu vezu. Ako ¾elite raèunalo\n"
-"povezati s Internetom ili lokalnom mre¾om, pristisnite \"U redu\". Pokrenut "
-"æe\n"
-"se proces automatskog prepoznavanja mre¾nih kartica i modema. Ako ovaj "
-"proces\n"
-"zaka¾e, iskljuèite \"Koristi autodetekciju\" kuæicu slijedeæi put. Mo¾ete\n"
-"odabrati i da ne namje¹tate mre¾u, ili da to uèinite kasnije; u tom "
-"sluèaju, \n"
-"samo stisnite \"Odustani\".\n"
-"\n"
-"Dostupne veze su: obièni modem, ISDN modem, ADSL veza, kablovski modem, te\n"
-"jednostavna LAN veza (Ethernet).\n"
-"\n"
-"Ovdje se neæemo detaljno baviti sa pojedinim konfiguracijama. Samo "
-"provjerite da\n"
-"li imate sve parametre od va¹eg pru¾atelja internet usluga ili sustavskog \n"
-"administratora.\n"
-"\n"
-"Mo¾ete pogledati u ``User Guide'', poglavlje o Internet vezama za detalje "
-"o \n"
-"postavkama, ili jednostavno saèekati da se sustav instalira, pa koristiti\n"
-"tamo opisani program da bi namjestili va¹u vezu.\n"
-"\n"
-"Ako ¾elite namjestiti mre¾u kasnije, poslije instalacije, ili ste zavr¹ili\n"
-"namje¹tanje mre¾e, stisnite \"Odustani\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada mo¾ete izabrati servise koje ¾elite pokreniti pri podizanju.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi dostupni sa trenutnom instalacijom.\n"
-"Pregledajet ih pa¾ljivo i maknite one koje nisu uvijek potrebni prilikom\n"
-"podizanja sustava.\n"
-"\n"
-"Odabiranjem odreðenog servisa dobit æete kratki opis tog servisa. Meðutim, "
-"ako\n"
-"niste sigurni je li servis koristan ili ne, sigurnije je ostaviti "
-"predodreðeno\n"
-"pona¹anje.\n"
-"\n"
-"!! Na ovoj razini obratite pozornost na to da li æete koristiti stroj kao\n"
-"poslu¾itelj: vjerojatno ne ¾elite pokretati neke servise koje ne trebate.\n"
-"Prisjetite se da neki servisi mogu biti opasni ako su pokrenuti na "
-"poslu¾itelju.\n"
-"Opæenito, izaberite samo one servise koji vam stvarno trebaju.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux upravlja vremenom po GMTu (Greenwich Mean Time) i prevodi ga u\n"
-"lokalno vrijeme prema vremenskoj zoni koju ste izabrali. Moguæe je, dodu¹e,\n"
-"ovo iskljuèiti iskljuèivanjem odabira \"Hardverski sat namje¹ten na GMT\" "
-"tako\n"
-"da je hardverski sat jednak sustavskom. Ovo je korisno kada se na raèunalu\n"
-"nalazi drugi operacijski sustav, poput Windows.\n"
-"\n"
-"Opcija \"Automatska sinhronizacija vremena\" æe automatski pode¹avati sat\n"
-"tako da æe se povezivati sa vremenskim poslu¾iteljem na Internetu. Sa "
-"popisa\n"
-"izaberite poslu¾itelj najbli¾e vama. Naravno, morate imati ispravnu vezu sa\n"
-"Internetom da bi ovo radilo. Takoðer, instalirat æe vremenski poslu¾itelj "
-"na\n"
-"va¹e raèunalo kojeg, opcionalno, mogu koristiti druga raèunala u va¹oj\n"
-"lokalnoj mre¾i."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (od X Window System) jest srce GNU/Linux grafièkog suèelja, na kojem "
-"poèivaju\n"
-"sva grafièka okru¾ja (KDE, GNOME, AfterStep, WindowMaker, itd.) koja dolaze "
-"sa\n"
-"Mandrake Linuxom. Ovdje æe DrakX poku¹ati automatski podesiti Xe.\n"
-"Jako je rijetko da æe zakazati, osim ako hardver nije vrlo star (ili nov)\n"
-"Ako uspije, pokrenut æe Xe automatski sa najboljom moguæom rezolucijom, "
-"ovisno\n"
-"o velièini monitora. Pojavit æe se prozor s upitom da li ga vidite.\n"
-"\n"
-"Ako ste pokrenuli \"Struènjak\" instalaciju, uæi æete u èarobnjak za "
-"namje¹tanje\n"
-"Xa. Pogledajte odgovarajuæi odjeljak u priruèniku za vi¹e informacija o "
-"ovom\n"
-"èarobnjaku.\n"
-"\n"
-"Ako vidite poruku tijekom testa, i odgovorite \"Da\", onda æe DrakX krenuti\n"
-"na slijedeæi korak. Ako ne mo¾ete vidjeti poruku, to jednostavno znaèi da "
-"je\n"
-"konfiguracija pogre¹na i test æe se automatski zavr¹iti nakon 10 sekundi, "
-"te\n"
-"povratiti ekran."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Konaèno æete biti pitani da li ¾elite vidjeti grafièko suèelje pri\n"
-"dizanju. Primjetite da ovo pitanje æe biti pitano iako ne ¾elite "
-"istestirati\n"
-"konfiguraciju. Vjerojatno, ¾elite odgovoriti sa \"Ne\" ukoliko æe va¹e "
-"raèunalo\n"
-"raditi kao poslu¾itelj, ili ako niste bili uspje¹ni u konfiguriranju va¹eg\n"
-"zaslona."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"U ovom trenutku, trebate izabrati gdje æete instalirati va¹\n"
-"Mandrake Linux operativni sustav na va¹ hard disk. Ukoliko je prazan ili "
-"ako\n"
-"postojeæi operativni sustav koristi èitav prostor na disku, trebate ga\n"
-"particionirati. Jednostavno, particioniranje hard diska sastoji se od "
-"logièkog\n"
-"dijeljenja kako bi napravili prostor za instalaciju va¹eg novog Mandrake "
-"Linux sustava.\n"
-"\n"
-"\n"
-"Zato ¹to su posljedice procesa particioniranja obièno ireverzibilne,\n"
-"particioniranje mo¾e biti stra¹no i stresno ukoliko ste korisnik bez "
-"iskustva.\n"
-"Ovaj èarobnjak pojednostavljuje proces. Prije poèetka, molimo konzultirajte "
-"upute\n"
-"i uzmite vremena koliko vam je potrebno.\n"
-"\n"
-"\n"
-"Trebate najmanje dvije particije. Jedna je za sam operativni sustav, a\n"
-"druga je za virtualnu memoriju (takoðer zvanu Swap).\n"
-"\n"
-"\n"
-"Ukoliko su particije veæ definirane (iz prija¹nje instalacije iliiz\n"
-"drugih particijskih alata), trebate samo izbarati te particije za "
-"instalaciju va¹eg\n"
-"Linux sustava.\n"
-"\n"
-"\n"
-"Ukoliko particije nisu veæ definirane, trebate ih napraviti. \n"
-"Da biste to napravili, koristite èarobnjak gore raspolo¾iv. U zavisnosti od "
-"va¹ih hard disk\n"
-"postavki, nekoliko rje¹enja je raspolo¾ivo:\n"
-"\n"
-"* Kori¹tenje postojeæe particije: èarobnjak je detektirao jednu ili vi¹e "
-"postojeæih Linux particija na va¹em hard disku. Ukoliko\n"
-"  ih ¾elite zadr¾ati, izaberite ovu opciju.\n"
-"\n"
-"\n"
-"* Obri¹i cijeli disk: ukoliko ¾elite obrisati sve podatke i sve particije "
-"koje postoje na va¹em hard disku i zamjeniti ih sa\n"
-"  va¹im novim Mandrake Linux sustavom, mo¾ete izabrati ovu opciju. Budite "
-"pa¾ljivi sa ovim rje¹enjem, neæete moæi\n"
-"  povratiti va¹ izbor nakon potvrde.\n"
-"\n"
-"\n"
-"* Koristiti slobodan prostor na Windows particiji: ukoliko je Microsoft "
-"Windows instaliran na va¹em hard disku i zauzima\n"
-"  cjeli raspolo¾iv prostor na njemu, trebate napraviti slobodan prostor za "
-"Linux podatke. Da biste to napravili mo¾ete obrisati va¹u\n"
-"  Microsoft Windows particiju i podatke (pogledajte \"Brisanje cijelog diska"
-"\" ili \"Ekspert mod\" rje¹enja) ili mjenjati velièinu va¹e\n"
-"  Microsoft Windows particije. Mjenjanje velièine mo¾e se obaviti bez "
-"gubitka bilo kakvih podataka. Ovo rje¹enje je\n"
-"  preporuèeno ukoliko ¾elite koristiti zajedno Mandrake Linux i Microsoft "
-"Windows-e na istom raèunalu.\n"
-"\n"
-"\n"
-"  Prije izabiranja ovog rje¹enja, molimo razumite da æe velièina va¹e "
-"Microsoft\n"
-"  Windows partiticije biti manja nego ¹to je sada. To znaèi da æete imati "
-"manje slobodnog prostora pod\n"
-"  Microsoft Windows-ima za spremanje va¹ih podataka ili instaliranje novog "
-"software-a.\n"
-"\n"
-"\n"
-"* Ekspertni mod: Ukoliko ¾elite particionirati ruèno va¹ hard disk, mo¾ete "
-"izabrati ovu opciju. Budite pa¾ljivi prije\n"
-"  izabiranja ovog rje¹enja. Vrlo je moæno, ali i vrlo opasno. Mo¾ete "
-"izgubiti sve va¹e podatke vrlo lako. Zato,\n"
-"  nemojte izabrati ovo rje¹enje ukoliko ne znate ¹to radite."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Svaka particija koja je novo definirana mora biti\n"
-"formatirana za kori¹tenje (formatiranje znaèi pravljenje datoteènog "
-"sustava).\n"
-"\n"
-"\n"
-"Trenutno, mo¾ete htjeti ponovno formatirati neke veæ postojeæe particije "
-"kako bi obrisali\n"
-"podatke koje one posjeduju. Ukoliko ¾elite to napraviti, molimo takoðer "
-"izaberite particije\n"
-"koje ¾elite formatirati.\n"
-"\n"
-"\n"
-"Molimo primjetite da nije nu¾no ponovno formatirati sve veæ postojeæe "
-"particije.\n"
-"Morate ponovno formatirati particije koje sadr¾e operativni sustav (poput \"/"
-"\",\n"
-"\"/usr\" ili \"/var\") ali ne morate ponovno formatirati particije koje "
-"sadr¾e podatke\n"
-"koje ¾elite zadr¾ati (tipièno /home).\n"
-"\n"
-"\n"
-"Molimo budite pa¾ljivi odabirom particija, poslije formatiranja, svi podaci "
-"æe biti\n"
-"obrisani i neæete ih moæi povratiti.\n"
-"\n"
-"\n"
-"Pritisnite na \"U redu\" kada ste spremni za formatiranje particije.\n"
-"\n"
-"\n"
-"Pritisnite na \"Odustani\" kada ¾elite izabrati druge particije za "
-"instalaciju va¹eg novog\n"
-"Mandrake Linux operativnog sustava."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Va¹ novi Mandrake Linux operativni sustav se trenutno instalira.\n"
-"U Zavisnosti od broja paketa koliko instalirate i brzine va¹eg raèunala,\n"
-"ova operacija mo¾e potrajati od nekoliko minuta do znaèajne kolièine\n"
-"vremena.\n"
-"\n"
-"\n"
-"Molimo budite strpljivi."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Prije nastavka trebate pa¾ljivo proèitati stavke licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju, i ako se ne sla¾ete u svim\n"
-"stavkama sadr¾anih u njoj, kliknite na \"Odbij\" gumb koji æe automatski\n"
-"zavr¹iti instalaciju. Za nastavak instalacije, kliknite na\n"
-"\"Prihvati\" gumb."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"U ovoj toèki instalacije, trebate izabrati koje\n"
-"partiticije æete koristiti za instalaciju va¹eg novog Mandrake Linux "
-"sustava. Ukoliko su\n"
-"particije veæ definirane (iz prethodne instalacije GNU/Linux-a ili iz\n"
-"drugih particijskih alata), mo¾ete koristiti postojeæe particije. U drugim "
-"sluèajevima,\n"
-"hard disk particije moraju biti definirane.\n"
-"\n"
-"\n"
-"Za pravljenje particija, morate prvo izabrati hard disk. Mo¾ete izabrati \n"
-"disk za particioniranje klikanjem na \"hda\" za prvi IDE disk, \"hdb\" za\n"
-"drugi ili \"sda\" za prvi SCSI disk i tako dalje.\n"
-"\n"
-"\n"
-"Za particioniranje izabranog hard diska, mo¾ete izabrati ove opcije:\n"
-"\n"
-"   * Obri¹i sve: ova opcija æe obrisati sve raspolo¾ive particije na "
-"odabranom hard disku.\n"
-"\n"
-"\n"
-"   * Auto alokacija: ova opcija vam dozvoljava da automatski napravite Ext2 "
-"i swap particije u slobodnom prostoru va¹eg\n"
-"     hard diska.\n"
-"\n"
-"\n"
-"   * Spasi particijsku tablicu: ukoliko je va¹a particijska tablica "
-"o¹teæena, mo¾ete probati spasiti ju koristeæi ovu opciju. Molimo\n"
-"     budite pa¾ljivi i zapamtite da ne mora biti uspje¹na.\n"
-"\n"
-"\n"
-"   * Povrati: mo¾ete koristiti ovu opciju za odustajanje od va¹ih promjena.\n"
-"\n"
-"\n"
-"   * Ponovno uèitaj: mo¾ete koristiti ovu opciju ukoliko ¾elite vratiti "
-"unazad sve promjene i uèitati va¹u inicijalnu particijsku tablicu\n"
-"\n"
-"\n"
-"   * Èarobnjak: ukoliko ¾elite koristiti èarobnjak za particioniranje va¹eg "
-"hard diska, mo¾ete koristiti ovu opciju. Preporuèeno je ukoliko \n"
-"     nemate dovoljno znanja oko particioniranja.\n"
-"\n"
-"\n"
-"   * Vrati sa diskete: ukoliko ste spremili va¹u particijsku tablicu na "
-"disketu tijekom prija¹nje instalacije, mo¾ete\n"
-"     ju vratiti koristeæi ovu opciju.\n"
-"\n"
-"\n"
-"   * Spremi na disketu: ukoliko ¾elite spremiti va¹u particijsku tablicu na "
-"disketu kako biste ju mogli kasnije vratiti, mo¾ete koristiti ovu\n"
-"     opciju. Jako je preporuèljivo koristiti ovu opciju\n"
-"\n"
-"\n"
-"   * Zavr¹i: kada ste zavr¹ili s particioniranjem va¹eg hard diska, "
-"koristite ovu opciju za spremanje va¹ih promjena.\n"
-"\n"
-"\n"
-"Za informaciju, mo¾ete dohvatiti bilo koju opciju koristeæi tastaturu: "
-"navigiranje kroz particije se obavlja koristeæi Tab i Up/Down strelice.\n"
-"\n"
-"\n"
-"Kada je particija odabrana, mo¾ete koristiti:\n"
-"\n"
-"           * Ctrl-c za pravljenje novih particija (kada je prazna particija "
-"izabrana)\n"
-"\n"
-"           * Ctrl-d za brisanje particije\n"
-"\n"
-"           * Ctrl-m za postavljanje toèke montiranja\n"
-"           \n"
-"\n"
-"           \n"
-"Ukoliko instalirate na PPC raèunalo, ¾eliti æe te napraviti malu HFS "
-"'bootstrap' particiju od najmanje 1MB za kori¹tenje\n"
-"od strane yaboot bootloader-a. Ukoliko se odluèite za pravljenje malo veæe "
-"particije, recimo 50MB, mo¾ete ju pronaæi korisnom za stavljanje\n"
-"dodatnog kernela i ramdisk slike u sluèaju nu¾de."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Vi¹e od jedne Microsoft Windows particije su pronaðene\n"
-"na va¹em hard disku. Molimo izaberite jednu kojoj ¾elite promjeniti velièinu "
-"kako bi instalirali\n"
-"va¹ novi Mandrake Linux operativni sustav.\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi; \"Linux ime\", "
-"\"Windows\n"
-"ime\" \"Kapacitet\".\n"
-"\n"
-"\"Linux ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska"
-"\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-"   * \"a\" znaèi \"master hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"b\" znaèi \"slave hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-"   * \"c\" znaèi \"master hard disk na sekundarnom IDE kontroleru\",\n"
-"\n"
-"   * \"d\" znaèi \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znaèi \"primarni hard disk\", \"b\" znaèi "
-"\"sekundarni hard disk\", itd...\n"
-"\n"
-"\"Windows ime\" je slovo va¹eg hard diska pod Windows-ima (prvi disk\n"
-"ili particija se zove \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Molimo budite strpljivi. Ova operacija mo¾e potrajati nekoliko minuta."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Molimo izaberite \"Instalacija\" ukoliko nemate prethodne verzijeMandrake "
-"Linux-a\n"
-"instalirano ili ako ¾elite koristiti nekoliko operativnih sustava.\n"
-"\n"
-"\n"
-"Molimo izaberite \"Dogradnja\" ukoliko ¾elite dograditi veæ postojeæu "
-"verzijuMandrake Linux-a.\n"
-"\n"
-"\n"
-"U zavisnosti od znanja u GNU/Linux, mo¾ete izabrati jednu od slijedeæih "
-"razina za instalaciju ili dogradnju\n"
-"va¹eg Mandrake Linux operativnog sustava:\n"
-"\n"
-"* Preporuèeno: ukoliko nikad niste instalirali GNU/Linux operativni sustav "
-"izaberite ovo. Instalacija æe biti\n"
-"  vrlo laka i pitati æe vas samo nekoliko pitanja.\n"
-"\n"
-"\n"
-"* Prilagoðeno: ukoliko ste veæ upoznati sa GNU/Linux, mo¾ete izabrati "
-"primarnu upotrebu (radna stanica, poslu¾itelj,\n"
-"  razvoj) za va¹ sustav. Trebati æete odgovoriti na vi¹e pitanja nego u "
-"\"Preporuèenoj\" instalacijskoj\n"
-"  klasi, zato trebate znati vi¹e o tome kako GNU/Linux radi kako bi izabrali "
-"ovu instalacijsku klasu.\n"
-"\n"
-"\n"
-"* Struènjak: ukoliko imate dobro znanje o GNU/Linux-u, mo¾ete izabrati ovu "
-"instalacijsku klasu. Kao u \"Prilagoðenoj\"\n"
-"  instalacijskoj klasi, moæi æete izabrati primarnu upotrebu za va¹ sustav "
-"(radna stanica, poslu¾itelj, razvoj). Budite jako\n"
-"  pa¾ljivi prije nego ¹to odaberete ovu instalacijsku klasu. Moæi æete "
-"izvr¹iti visoko prilagoðenu instalaciju.\n"
-"  Odgovori na neka pitanja mogu biti jako te¹ki ukoliko nemate dobro znanje "
-"GNU/Linux. Dakle, nemojte izabrati\n"
-"  ovu instalacijsku klasu ukoliko ne znate ¹to radite."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molim odaberite ispravni port. Na primjer, COM1 port pod MS Windowsima\n"
-"je imenovan ttyS0 pod GNU/Linuxom."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) i Grub su bootloaderi: oni su u moguænosti podiæi\n"
-"ili GNU/Linux ili bilo koji drugi postojeæi operativni sustav na va¹em "
-"raèunalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno pronaðeni i\n"
-"instalirani. Ako to nije sluèaj, mo¾ete ga dodati ruèno na ovom\n"
-"zaslonu. Budite pa¾ljivi da izaberete ispravne parametre.\n"
-"\n"
-"\n"
-"Takoðer æete po¾eliti ne dati pristup tim drugim operativnim sustavima\n"
-"drugima, u tom sluèaju mo¾ete obrisati odgovarajuæe unose. Ali\n"
-"u tom sluèaju, trebati æete boot disketu kako bi ih mogli podiæi!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sada morate odabrati gdje ¾elite staviti zahtijevane informacije za "
-"podizanje\n"
-"GNU/Linuxa.\n"
-"\n"
-"Ako ne znate toèno ¹to radite, izaberite \"Prvi sektor diska\n"
-"(MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX æe poku¹ati pronaæi PCI SCSI adapter(e). Ukoliko DrakX\n"
-"pronaðe SCSI adapter i zna koji upravljaèki program da koristi, on æe "
-"automatski biti\n"
-"instaliran.\n"
-"\n"
-"\n"
-"Ukoliko nemate SCSI adapter, ISA SCSI adapter ili PCI SCSI adapter koji\n"
-"DrakX ne mo¾e prepoznati, biti æete pitani da li imate SCSI adapter u va¹em\n"
-"sustavu. Ukoliko nemate adapter, mo¾ete kliknuti na \"Ne\". Ukoliko kliknete "
-"na\n"
-"\"Da\", dobiti æete popis upravljaèkih programa odakle mo¾ete izabrati va¹\n"
-"specifièan adapter.\n"
-"\n"
-"\n"
-"Ako trebate ruèno specifirati va¹ adapter, DrakX æe pitati da li ¾elite \n"
-"specifirati opcije za njega. Trebali biste dozvoliti DrakX-u da isproba "
-"opcije za\n"
-"hardware. Ovo obièno radi dobro.\n"
-"\n"
-"\n"
-"Ako ne, trebati æete navesti opcije za upravljaèki program. Molimo "
-"pregledajte User\n"
-"Guide (poglavlje 3, sekciju \"Collective informations on your hardware\") za "
-"preporuke\n"
-"o pribavljanju ovih informacija iz dokumentacije hardware-a, sa \n"
-"proizvoðaèevog Web site-a (ukoliko imate Internet pristup) ili iz Microsoft "
-"Windows-a\n"
-"(ukoliko ga imate na va¹em sustavu)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mo¾ete dodati dodatne unose za yaboot, ili za drugi operativni sustav,\n"
-"alternativne kernele, ili za spasonosnu boot sliku.\n"
-"\n"
-"\n"
-"Za druge OS-ove - unos se sastoji samo od labele i root particije.\n"
-"\n"
-"\n"
-"Za Linux, postoji nekoliko moguæih opcija: \n"
-"\n"
-"\n"
-"  - Labela: Ovo je jednostavno ime koje æete napisati u yaboot promptu za "
-"odabir ove \n"
-"boot opcije.\n"
-"\n"
-"\n"
-"  - Slika: Ovo æe biti ime kernela pri podizanju. Tipièno vmlinux ili\n"
-"varijacija vmlinux-a sa ekstenzijom.\n"
-"\n"
-"\n"
-"  - Root: root ureðaj ili '/' za va¹u Linux instalaciju.\n"
-"\n"
-"\n"
-"  \n"
-"  - Dodatak: Na Apple hardware-u, kernel dodatak opcija se koristi vrlo "
-"èesto za\n"
-"pomoæ pri inicijaliziranju video hardware-a, ili za omoguæavanje emulacije "
-"tastaturnih mi¹jih gumba\n"
-"zbog èestog nedostatka 2-og ili 3-eg mi¹jeg gumba na Apple mi¹evima. "
-"Slijedeæe \n"
-"su neki primjeri:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Ova opcija se mo¾e koristiti ili za uèitavanje inicijalnih "
-"modula, prijenego ¹to je boot\n"
-"ureðaj raspolo¾iv, ili za uèitavanje ramdisk slike za spasonosne boot "
-"situacije.\n"
-"\n"
-"\n"
-"  - Initrd-velièina: Podrazumijevana velièina ramdisk-a je opæenito 4096 "
-"byte-ova. Ukoliko trebate\n"
-"alocirati veæi ramdisk, ova opcija mo¾e biti kori¹tena.\n"
-"\n"
-"\n"
-"  - Èitaj-Pi¹i: Normalno je 'root' particija inicijalno podignuta u èitaj-"
-"samo, za moguænost\n"
-"provjere datoteènog sustava prije nego sustav postane '¾iv'. Mo¾ete "
-"nadjaèati ovu opciju ovdje.\n"
-"\n"
-"\n"
-"  - NoVideo: Ako se Apple hardware poka¾e kao iznimno problematièan, mo¾ete\n"
-"izabrati ovu opciju za podizanje u 'novideo' modu, sa native framebuffer "
-"podr¹kom.\n"
-"\n"
-"\n"
-"  - Podrazumijevano: Izabire ovaj unos kao podrazumijevani Linux izbor, "
-"moguæe izbirati sa samo\n"
-"pritiskom ENTER-a na yaboot pitanju. Ovaj unos æe takoðer biti oznaèen sa "
-"'*', ukoliko\n"
-"koristite TAB za pregledavanje boot izbora."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je bootloader za NewWorld MacIntosh hardware. U moguænosti je\n"
-"podiæi ili GNU/Linux, MacOS, ili MacOSX, ukoliko postoje na va¹em raèunalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno pronaðeni i\n"
-"instalirani. Ukoliko to nije sluèaj, mo¾ete dodati unos ruèno na ovom\n"
-"zaslonu. Budite pa¾ljivi da izaberete ispravne parametre.\n"
-"\n"
-"\n"
-"Yaboot glavne opcije su:\n"
-"\n"
-"\n"
-"  - Init Poruka: Jednostavna tekst poruka koja se prika¾e prije pitanja o\n"
-"podizanju.\n"
-"\n"
-"\n"
-"  - Boot Ureðaj: Oznaèava gdje ¾elite staviti informaciju potrebnu za \n"
-"podizanje GNU/Linux-a. Opæenito, morati æete imati postavljenu bootstrap "
-"particiju prije, \n"
-"da mo¾e dr¾ati ovu informaciju.\n"
-"\n"
-"\n"
-"  - Otvorena Firmware Pauza: Za razliku od LILO-a, postoje dvije raspolo¾ive "
-"pauze sa\n"
-"yaboot-om.  Prva pauza se mjeru sekundama i na tom mjestu mo¾ete \n"
-"birati izme¾u CD-a, OF boot-a, MacOS-a ili Linux-a.\n"
-"\n"
-"\n"
-"  - Kernel Boot Èekanje: Ovo èekanje je slièno LILO boot èekanju. Poslije \n"
-"izabiranja Linux-a, imati æete pauzu od 0.1 sekunde prije nego "
-"podrazumijevani\n"
-"kernel opis bude odabran.\n"
-"\n"
-"\n"
-"  - Omoguæi CD Boot?: Postavljanje ove opcije æe vam dozvoliti da mo¾ete "
-"izabrati 'C' za CD na\n"
-"prvom pitanju pri podizanju.\n"
-"\n"
-"\n"
-"  - Omoguæi OF Boot?: Postavljanje ove opcije æe vam dozvoliti da mo¾ete "
-"izabrati 'N' za Open\n"
-"Firmware prvi prvom pitanju pri podizanju.\n"
-"\n"
-"\n"
-"  - Podrazumijevani OS: Mo¾ete izabrati koji OS æete podiæi podrazumijevano "
-"kada Open Firmware \n"
-"pauza istekne."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk kojeg ¾elite obrisati kako bi instalirali va¹u\n"
-"novu Mandrake Linux particiju. Budite pa¾ljivi, svi postojeæi podaci\n"
-"biti æe izgubljen i neæe se moæi povratiti!"
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Izaberite \"U redu\" ukoliko ¾elite obrisati sve podatke i\n"
-"postojeæe particije na navedenom hard disku. Budite pa¾ljivi, nakon "
-"klikanja\n"
-"na \"U redu\", neæete moæi povratiti bilo kakve postojeæe podatke ili "
-"particije\n"
-"na ovom hard disku, ukljuèujuæi Windows podatke.\n"
-"\n"
-"\n"
-"Pritisnite na \"Odustani\" za prekidanje ove operacije bez gubljenja bilo\n"
-"kakvih postojeæih podataka i particija na ovom hard disku."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate takoðer formatirati %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste slijedeæe poslu¾itelje: %s\n"
-"\n"
-"\n"
-"Ti poslu¾itelji biti æe postavljeno aktivirani. Oni nemaju poznatih "
-"sigurnosnih\n"
-"propusta, ali neki novi mogu biti pronaðeni. U tom sluèaju, morate ga "
-"nadograditi\n"
-"¹to prije moguæe.\n"
-"\n"
-"\n"
-"Da li zaista ¾elite instalirati te poslu¾itelje?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Umetnite FAT formatiranu disketu u pogon %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT formatirana"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Za kori¹tenje spremljenog odabira paketa, podignite instalaciju sa ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gre¹ka prilikom èitanja datoteke %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki hardware na va¹em raèunalu treba ``vlasnièke'' upravljaèke programe\n"
-"kako bi proradio. Mo¾ete naæi vi¹e informaciju o tome na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Prvo napravite particiju (ili kliknite na postojeæu) te\n"
-"odaberite akciju ``Mjesto monitranja'' te odaberite `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Swap particija ne postoji\n"
-"\n"
-"Da ipak nastavim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Koristi postojeæe particije"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nema postojeæih particija koje bih mogao upotrijebiti"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju ¾elite koristiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Odaberite velièinu"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Velièina korijenske particije u MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Velièina swap particiju u MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Iskoristi slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji ¾elite promijeniti velièinu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Izraèunavam granice Windows datoteènog sustava"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program koji mjenja velièinu FAT-a ne mo¾e rukovati va¹om particijom, \n"
-"slijedeæa gre¹ka se dogodila: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va¹a Windows particija je prefragmentirana, molim pokrenite ``defrag'' prvo."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX sada mora promijeniti velièinu va¹e Windows particije\n"
-"Budite vrlo oprezni buduæi da je ova operacija\n"
-"izuzetno opasna. Ukoliko jo¹ niste mijenjali velièinu particije molim\n"
-"izaðite prvo iz instalacije, pokrenite scandisk pod Windowsima (opcionalno "
-"pokrenite defrag), tada ponovno pokrenite instalaciju.\n"
-"Takoðer preporuèljivo je da saèuvate va¹e podatke (napravite backup).\n"
-"Kada ste sigurni da ¾elite nastaviti, pritisnite U redu."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koliku velièinu ¾elite zadr¾ati za windowse"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particija %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Mijenjanje FAT velièine nije uspjelo: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nema FAT particije za mjenjanje velièine ili za kori¹tenje loopback-a (ili "
-"nema dovoljno prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Obri¹i cijeli disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windowse(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate vi¹e od jednog hard diska, na koji ¾elite instalirati Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SVE postojeæe particije i podaci biti æe izgubljeni na disku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Proizvoljno particioniranje diska"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada mo¾ete razdijeliti %s.\n"
-"Kada ste gotovi ne zaboravite spremiti postavu sa `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na va¹oj Windows particiji"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ne mogu pronaæi bilo kakvo mjesto za instaliranje"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX èarobnjak za particioniranje je prona¹ao slijedeæa rje¹enja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje neuspjelo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Podi¾em mre¾u"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Onemoguæujem mre¾u"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Dogodila se gre¹ka, ali neznam kako s njom lijepo rukovati.\n"
-"Nastavite dalje na vlastiti rizik."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dupliciraj mjesto monitranja %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki va¾ni paketi nisu se instalirali pravilno.\n"
-"Ili je va¹ cdrom pogon ili cd medij u defektu.\n"
-"Provjerite cdrom na instaliranom raèunalu koristeæi \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobrodo¹li u %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Disketni pogon nije dostupan"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Pokreæem korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Va¹ sustav je slab na resursima. Mo¾ete imati nekih problem prilikom\n"
-"instalacije Mandrake Linux-a. Ukoliko se to desi, mo¾ete probati tekstualnu\n"
-"instalaciju. Za to, pritisnite `F1' kada podi¾ete CDROM, i unesite `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalacijski razred"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Molim izaberite jedan od slijedeæih razreda instalacije:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna velièina izabranih grupa je otprilike %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ukoliko ¾elite instalirati manje od ove velièine,\n"
-"izaberite postotak paketa koliko ¾elite instalirati.\n"
-"\n"
-"Mali postotak æe instalirati samo najva¾nije pakete;\n"
-"dok postotak od 100%% æe instalirati sve odabrane pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Imate mjesta na va¹em disku za samo %d%% paketa.\n"
-"\n"
-"Ukoliko ¾elite instalirati manje od ovoga,\n"
-"izaberite postotak paketa koliko ¾elite instalirati.\n"
-"Mali postotak æe instalirati samo najva¾nije pakete;\n"
-"dok postotak od %d%% æe instalirati koliko god je paketa moguæe."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Detaljniji izbor nalazi se u slijedeæem koraku."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Odaberite postotak paketa koje ¾elite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Odabir grupe paketa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individualan odabir paketa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna velièina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Lo¹ paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Inaèica: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velièina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Znaèaj: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Ne mo¾ete oznaèiti ovaj paket buduæi da nema dovoljno mjesta gdje ga se mo¾e "
-"instalirati"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Slijedeæi paketi æe biti instalirani"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Slijedeæi paketi æe biti uklonjeni"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ne mo¾ete oznaèiti/odznaèiti ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Buduæi da je ovo obvezni paket ne mo¾ete ga odznaèiti"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne mo¾ete odznaèiti ovaj paket buduæi da je veæ instaliran"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket treba nadograditi\n"
-"Da li ste sigurni da ga ¾elite odznaèiti?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne mo¾ete odznaèiti ovaj paket buduæi da ga treba nadograditi"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Prika¾i automatski odabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instaliraj"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Uèitaj/Spremi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Dograðujem izbor paketa"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Odaberite pakete koje ¾elite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostalo vrijeme"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Molimo prièekajte, Pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promjenite va¹ Cd-Rom!\n"
-"\n"
-"Ubacite Cd-Rom oznaèen \"%s\" u va¹ pogon i pritisnite U redu kada "
-"zavr¹ite.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli instalaciju sa ovog "
-"Cd-Rom-a."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Da ipak nastavim?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Javila se gre¹ka prilikom sortiranja paketa:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Pojavila se gre¹ka kod instalacije paketa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Upozorenje\n"
-"\n"
-"Molimo proèitajte pa¾ljivo èinjenice ni¾e. Ukoliko se ne sla¾ete sa bilo\n"
-"kojim dijelom, nemate dozvolu instalirati slijedeæi CD medij. Pritisnite "
-"'Odbij' \n"
-"za nastavak instalacije bez kori¹tenja ovog medija.\n"
-"\n"
-"\n"
-"Neke komponente sadr¾ane u slijedeæem CD mediju nisu pokrivene\n"
-"GPL licencom ili sliènim ugovorom. Svaka takva komponenta je tada\n"
-"pokrivena stavkama i uvjetima svojim vlastitim specifiènim licencama. \n"
-"Molimo proèitajte pa¾ljivo i slo¾ite se specifiènim licencama prije \n"
-"va¹eg kori¹tenja ili redistribuiranja navedenih komponenti. \n"
-"Takve licence opæenito zabranjuju prijenos, dupliciranje \n"
-"(osim za spasonosne kopije), redistribuciju, reverzno in¾enjerstvo, \n"
-"disasembliranje, dekompilaciju ili promjenu komponente. \n"
-"Svako kr¹enje ugovora æe odmah prekinuti va¹a prava kod\n"
-"specifiène licence. Ako vam stavke specifiène licence ne odobre takva\n"
-"prava, obièno ne mo¾ete instalirati programe na vi¹e od jednog\n"
-"sustava, ili prilagoditi ga za kori¹tenje na mre¾i. Ako ste u nedoumici,\n"
-"kontaktirajte direktno distributera ili urednika komponente. \n"
-"Prijenos treæim osobama ili kopiranje takvih komponenti ukljuèujuæi \n"
-"dokumentaciju je obièno zabranjeno.\n"
-"\n"
-"\n"
-"Sva prava na komponente slijedeæeg CD medija pripadaju njihovim \n"
-"uva¾enim autorima i za¹tiæeni su intelektualnim vlasni¹tvom i \n"
-"autorskim zakonima primjenjivim na software-ske programe.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Pojavila se gre¹ka"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Da li zaista ¾elite napustiti instalaciju?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licencni dogovor"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Uvod\n"
-"\n"
-"Operativni sustav i njegove razlièite komponente raspolo¾ive u Mandrake "
-"Linux distribuciji \n"
-"æe se zvati \"Software-ski Produkti\" daljnje u tekstu. Software-ski "
-"Produkti  ukljuèuju, ali nisu \n"
-"ogranièeni na, skup programa, metoda, zakona i dokumentacija vezanih uz "
-"operativni\n"
-"sustav i razlièite komponente Mandrake Linux distribucije.\n"
-"\n"
-"\n"
-"1. Licencni Dogovor\n"
-"\n"
-"Molimo pa¾ljivo proèitajte ovaj dokument. Ovaj dokument je licenci dogovor "
-"izmeðu vas i \n"
-"MandrakeSoft S.A. koji se primjenjuje na Software-ske produkte.\n"
-"Instaliranjem, dupliciranjem ili kori¹tenjem Software-skih Produkata u bilo "
-"kojem obliku,eksplicitno \n"
-"prihvaæate i potpuno se sla¾ete da æete prihvatiti stavke i uvjete ove "
-"Licence. \n"
-"Ukoliko se ne sla¾ete sa bilo kojim dijelom licence, nije vam dozvoljeno "
-"instalirati, duplicirati ili koristiti \n"
-"Software-ski produkt. \n"
-"Svaki poku¹aj instalacije, dupliciranja ili kori¹tenja Software-skog "
-"Produkta u obliku kojem ne prilièi \n"
-"sa stavkama i uvjetima ove licence je prazno i uni¹titi æe va¹a prava pod "
-"ovom\n"
-"Licencom. Uslijed uni¹tenja licence, morate odmah uni¹ititi sve kopije \n"
-"Software-skog Produkta.\n"
-"\n"
-"\n"
-"2. Ogranièeno Jamstvo\n"
-"\n"
-"Software-ski Produkt i pripadajuæa dokumentacija je pru¾ena \"kako je\", bez "
-"jamstva, do \n"
-"mjere dozvoljene zakonom.\n"
-"MandrakeSoft S.A. neæe, u bilo kojim sluèajevima i do te mjere dozvoljene "
-"zakonom, biti odgovaran za bilo kakvu specijalnu,\n"
-"nesretnu, direktnu ili indirektnu ¹tetu bilo kakvu (ukljuèujuæi granice "
-"¹tete od gubitka\n"
-"posla, prestanka posla, financijskih gubitaka, legalnih plaæanja i kazni "
-"posljedica sudskih \n"
-"presuda, ili bilo kakvih drugih posljedica gubitka) ¹to je posljedica "
-"kori¹tenja ili nemoguænosti kori¹tenja Software-skog \n"
-"Produkta, iako je MandrakeSoft S.A. bio upozoren od moguænosti takve \n"
-"¹tete.\n"
-"\n"
-"OGRANIÈENA ODGOVORNOST POVEZANA SA POSJEDOVANJEM ILI KORI©TENJEM ZABRANJENOG "
-"SOFTWARE-A U NEKIM ZEMLJAMA\n"
-"\n"
-"Do granice dozvoljene zakonom, MandrakeSoft S.A. ili njegovi distributori "
-"neæe, u bilo kakvim sluèajevima, biti \n"
-"odgovaran za bilo kakvu specijalnu, nesretnu, direktnu ili indirektnu ¹tetu "
-"bilo kako (ukljuèujuæi \n"
-"ogranièene ¹tete zbog gubitka posla, prekida posla, financijskog gubitka, "
-"legalnih plaæanja \n"
-"i kazni posljedica sudskih presuda, ili bilo kakvih drugih "
-"posljedicagubitka) ¹to je posljedica \n"
-"posjedovanja ili kori¹tenja software-skih komponenti ili kao posljedica "
-"skidanja (download-a) software-skih komponenti \n"
-"sa jednog od Mandrake Linux site-ova koja su zabranjena ili ogranièena u "
-"nekim zemljama po lokalnim zakonima.\n"
-"Ova ogranièena odgovornost se primjenjuje na, ali nije ogranièena, jake "
-"kriptografske komponente \n"
-"ukljuèene u Software-ski Produkt.\n"
-"\n"
-"\n"
-"3. GPL Licenca i sliène licence\n"
-"\n"
-"Software-ski Prodkt se sastoji od komponenti napravljenih od raznih ljudi "
-"ili entiteta.  Veliki \n"
-"broj tih komponenti je pokriveno pod stavkama i uvjetima GNU Opæe Javne \n"
-"Licence, u daljnjem tekstu zvana \"GPL\", ili  sliènih licenci. Veliki broj "
-"tih licenci dozvoljava vam kori¹tenje, \n"
-"dupliciranje, prilagoðavanje ili redistribuciju komponenti koju ona pokriva. "
-"Molimo proèitajte pa¾ljivo stavke \n"
-"i uvjete licencnog dogovora svake komponente prije kori¹tenja bilo koje "
-"komponente. Bilo koje pitanje \n"
-"o licenci komponente trebao bi biti adresiran autoru komponente a ne "
-"MandrakeSoft-u.\n"
-"Programe razvijeni od strane MandrakeSoft S.A. su pokriveni GPL licencom. "
-"Dokumentacija napisana \n"
-"od strane MandrakeSoft S.A. je pokrivena specifiènom licencom. Molimo "
-"pogledajte dokumentaciju za \n"
-"vi¹e detalja.\n"
-"\n"
-"\n"
-"4. Prava na intelektualno vlasni¹tvo\n"
-"\n"
-"Sva prava komponenti Software-skog Produkta pripada njihovim uva¾enim "
-"autorima i \n"
-"za¹tiæeni su intelektualnim vlasni¹tvom i autorskim zakonima primjenjivim na "
-"software-ske programe.\n"
-"MandrakeSoft S.A. zadr¾ava svoje pravo za izmjenu ili prilagoðavanje "
-"Software-skog Produkta, kao cijelinu ili u\n"
-"dijelovima, u svim sluèajevima za sve namjene.\n"
-"\"Mandrake\", \"Mandrake Linux\" i pripadajuæi logoi su za¹tiæeni prodajni "
-"znaci MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Dr¾avni zakoni \n"
-"\n"
-"Ukoliko neki dio ovog dogovora govori ni¹ta, ilegalan ili neprikladan "
-"sudstvu, taj \n"
-"dio mo¾e se iskljuèiti iz ovog ugovora. Ali ostajete obveznu drugim "
-"primjenjivim sekcijama\n"
-"ugovora.\n"
-"Za stavke i uvjete ove Licence je nadle¾an zakon Francuske.\n"
-"Sve sporove oko stavaka licence æe preferirano biti ureðeno sudom. Kao "
-"zadnji \n"
-"izlaz, spor æe biti predan odgovarajuæem Sudu u Parizu - Francuska.\n"
-"Za bilo kakva pitanja o ovom dokumentu, molimo kontaktirajte MandrakeSoft S."
-"A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tipkovnica"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Molim, izaberite raspored tipkovnice."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je cijeli popis raspolo¾ivih tipkovnica"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Koji instalacijski razred ¾elite?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instaliraj/Nadogradi"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili nadogradnja?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Preporuèeno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Dogradnja"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Samo dogradi pakete"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Molim izaberite va¹u vrstu mi¹a."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port mi¹a"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Izaberite na kojem serijskom portu je mi¹ prikljuèen."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacija gumbova"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 gumba"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 gumba"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Pode¹avam PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Pode¹avam IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Tra¾im particije kako bi prona¹ao mjesta montiranja"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Odaberite mjesta montiranja"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu proèitati particijsku tablicu, previ¹e je koruptirana za mene :(\n"
-"Mogu poku¹ati sa brisanjem lo¹ih particija (SVI PODACI æe biti "
-"izgubljeni!).\n"
-"Drugo rje¹enje je onemoguæiti DrakX-u da mjenja particijsku tablicu.\n"
-"(gre¹ka je %s)\n"
-"\n"
-"Da li se sla¾ete da izgubite sve particije?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nije uspio proèitati va¹u particijsku tablice.\n"
-"Nastavite o vlastitoj odgovornosti."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema slobodnog mjesta za 1 MB bootstrap! Instalacija æe nastaviti, ali za "
-"podizanje va¹eg sustava, trebati æete napraviti bootstrap particiju u "
-"DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Niti jedna root particija nije pronaðena da se obavi dogradnja"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Korijenska particija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Koja je korijenska particija  (/) va¹eg sustava?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Morate ponovo pokrenuti sustav kako bi se aktivirala promjena particijske "
-"tablice"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje ¾elite formatirati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Provjeri za lo¹e blokove?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatiram particije"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Stvaram i formatiram datoteku %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nema dovoljno swapa za zavr¹etak instalacije, molim dodajte jo¹"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Tra¾im dostupne pakete"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Tra¾im pakete koje mogu nadograditi"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Va¹ sustav nema dovoljno prostora za instalaciju ili dogradnju (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletno (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporuèeno (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite uèitivanje ili spremanje izbora paketa na disketu.\n"
-"Format je isto kao auto_install napravljene diskete."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Uèitaj sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Uèitavam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Odabir paketa"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Umetnite disketu koja sadr¾ava izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Spremi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Izabrana velièina je veæa nego raspolo¾iv prostor"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tip instalacije"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste izabrali niti jednu grupu paketa\n"
-"Izaberite minimalnu instalaciju ako ¾elite"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Sa X-ima"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporuèeno!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno malena instalacija (posebice bez urpmia)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve dolje navedene CDove kliknite U redu.\n"
-"Ako nemate niti jedan od navedenih CD kliknite Odustani.\n"
-"Ako imate samo neke od dolje navedenih CDa odznaèite one koje nemate i "
-"kliknite U redu."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom naslovljen \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Postava nakon instalacije"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molim, umetnite Boot disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molim, umetnite Update Modules disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sada imate moguænost za skidanje software-a za enkripciju.\n"
-"\n"
-"UPOZORENJE:\n"
-"\n"
-"Zbog razlièitih opæih zahtjeva primjenjivih na ovaj software i presuda\n"
-"raznih sudova, kupac i/ili krajnji korisnik ovog software-a treba se\n"
-"uvjeriti da zakoni njegovog/e sudstva dozvoljava mu/joj da skine, spremi\n"
-"i/ili koristi ovaj software.\n"
-"\n"
-"U dodatku kupac i/ili krajnji korisnik mora dijelom biti svjestan da ne "
-"prekr¹i\n"
-"zakon svoga sudstva. Ukoliko kupac i/ili krajnji korisnik ne \n"
-"po¹tuje stavke tih primjenjivih zakona, mo¾e ga dovesti do ozbiljnih\n"
-"sankcija.\n"
-"\n"
-"U bilo kojem sluèaju Mandrakesoft ili njegovi proizvoðaèi i/ili nabavljaèine "
-"mogu biti odgovorni\n"
-"za specijalne, indirektne ili sluèajne ¹tete bilo kako (ukljuèujuæi, ali ne\n"
-"ogranièana na gubitak profita, prekid posla, gubitak komercijalnih podataka\n"
-"i\n"
-"drugih novèanih gubitaka, i eventualne odgovornosti i isplate naknade ¹to "
-"treba biti plaæeno\n"
-"odlukom suda) ¹to je posljedica kori¹tenja, posjedovanja ili samog\n"
-"skidanja ovog software-a, kojemu æe kupac i/ili krajnji korisnik mo¾e\n"
-"eventualno imati pristup poslije potpisivanja postojeæeg ugovora/dogovora.\n"
-"\n"
-"\n"
-"Za bilo kakve upite u svezi ovog ugovora, molimo kontaktirajte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-#, fuzzy
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Imate moguænost skidanja (downloada) paketa za dogradnju koji su\n"
-"iza¹li poslije nego ¹to je distribucija postala raspolo¾iva.\n"
-"\n"
-"Dobiti æete sigurnosne popravke i popravke od gre¹aka, ali trebate imati\n"
-"Internet vezu konfiguriranu za nastavak.\n"
-"\n"
-"Da li ¾elite nastaviti ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontaktiram Mandrake Linux web site za dobivanje popisa raspolo¾ivih mirrora"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg ¾elite skinuti pakete"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Spajam se na mirror kako bih pribavio popis dostupnih paketa"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Koja je va¹a vremenska zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Va¹ hardverski sat namje¹ten je na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska vremenska sinkronizacija (koristeæi NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Poslu¾itelj"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS poslu¾itelj"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nema pisaèa"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Da li imate ISA zvuènu karticu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije za pode¹avanje va¹e zvuène "
-"kartice"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije pronaðena zvuèna kartica. Probajte \"harddrake\" poslije instalacije"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sumarno"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mi¹"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Pisac"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvuèna kartica"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartica"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Pode¹avanje root lozinke"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez lozinke"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova lozinka je prejednostavna (lozinka mora sadr¾avati barem %d znakova)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Provjera autentiènosti"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Poslu¾itelj"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domena"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Poslu¾itelj"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Proizvoljna boot disketa omoguæava naèin podizanja va¹eg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne ¾elite "
-"instalirati\n"
-"SILO na va¹ sustav, ili je drugi operativni sustav uklonio SILO, ili SILO "
-"ne\n"
-"¾eli raditi sa va¹om konfiguracijom hardware-a. Proizvoljna boot disketa "
-"takoðer mo¾e biti kori¹tena sa\n"
-"Mandrake spasonosnom slikom, omoguæavajuæi tako lak¹e spa¹avanje od raznih "
-"sustavskih\n"
-"gre¹aka.\n"
-"\n"
-"Ako ¾elite napraviti boot disketu za va¹ sustav, ubacite disketu u prvi\n"
-" pogon i pritisnite \"U redu\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prvi disketni pogon"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Drugi disketni pogon"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Preskoèi"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Proizvoljna boot disketa omoguæava naèin podizanja va¹eg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne ¾elite "
-"instalirati\n"
-"LILO (ili grub) na va¹ sustav, ili je drugi operativni sustav uklonio LILO, "
-"ili LILO ne\n"
-"¾eli raditi sa va¹om konfiguracijom hardware-a. Proizvoljna boot disketa "
-"takoðer mo¾e biti kori¹tena sa\n"
-"Mandrake spasonosnom slikom, omoguæavajuæi tako lak¹e spa¹avanje od raznih\n"
-" sustavskih gre¹aka.\n"
-"Da li ¾elite napraviti proizvoljnu boot disketu za va¹ sustav?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "®alim, meðutim disketni pogon nije dostupan"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Izaberite disketni pogon koji ¾elite koristiti za izradu boot diskete"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Umetnite disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Stvaram boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripremam bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Èini se da imate OldWorld ili Nepoznato\n"
-" raèunalo, yaboot bootloader neæe moæi raditi kod vas.\n"
-"Instalacija æe nastaviti, ali æete morati\n"
-" koristiti BootX da podignete va¹e raèunalo"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Da li ¾elite koristiti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gre¹ka prilikom instalacije aboot-a, \n"
-"probati nasilno instalirati iako to mo¾e uni¹titi prvu particiju?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaliranje bootloadera"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Instalacija bootloader-a nije uspjela. Prijavljena je slijedeæa gre¹ska:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Trebati æete promjeniti va¹ Otvoreni Firmware boot-ureðaj kako bi\n"
-" omoguæili bootloader. Ukoliko ne ¾elite vidjeti bootloader prompt pri\n"
-" podizanju, pritisnite Command-Option-O-F pri podizanju i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Tada napi¹ite: shut-down\n"
-"Pri slijedeæem podizanju trebali biste vidjeti prompt bootloadera."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Umetnite praznu disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Niste zavr¹ili sve korake.\n"
-"\n"
-"®elite li zaista zavr¹iti?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Èestitam, instalacija je kompletna.\n"
-"Uklonite boot medij i pritisnite return za ponovno podizanje.\n"
-"\n"
-"\n"
-"Za informacije o popravcima koji su raspolo¾ivi za ovo izdanje Mandrake "
-"Linux-a,\n"
-"konzultirajte Eratu raspolo¾ivu na\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacije o konfiguriranju va¹eg sustava je raspolo¾ivo u poslije\n"
-"instalacijskom poglavlju od Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto instalacija mo¾e biti potpuno automatska ukoliko ¾elite,\n"
-"u tom sluèaju æe preuzeti hard disk!!\n"
-"(ovo znaèi za instalaciju na drugo raèunalo).\n"
-"\n"
-"Mo¾ete preferirati da ponovite instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatski"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ponovno prika¾i"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Spremi odabir paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> izmeðu elemenata  | <Space> bira | <F12> slijedeæi zaslon"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Izaberite datoteku"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Osnovno"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Molim prièekajte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Pro¹iri stablo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sa¾mi stablo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Prebaci izmeðu ravno i grupno sortiranog"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Krivi izbor, poku¹ajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va¹ izbor? (uobièajeno %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Unosi koje trebate popuniti:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va¹ izbor? (0/1, uobièajeno '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Gumb `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Da li ¾elite kliknuti na ovaj gumb? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va¹ izbor? (uobièajeno `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari za odabir iz (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molim, izaberite prvi broj do 10 kojeg ¾elite urediti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"Va¹ izbor? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Obavijest, naziv promijenjen:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ponovno Po¹alji"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Èe¹ka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Njemaèka"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "©panjolska"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finska"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francuska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norve¹ka"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poljska"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruska"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "©vedska"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK tipkovnica"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US tipkovnica"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaæa ma¹ina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejd¾anska (latinica)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgijska"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "©vicarska (Njemaèki raspored)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "©vicarska (francuski raspored)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Èe¹ka (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Njemaèka (bez mrtvih tipaka)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norve¹ka)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (©vedska)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonska"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska  (\"Ruski\" raspored)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska  (\"Latin\" raspored)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grèka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Maðarska"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Hrvatska"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelska"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (fonetska)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranska"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandska"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Talijanska"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanska (106 tipaka)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejska tipkovnica"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino amerièka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanska AZERTY (stara)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanska AZERTY (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanska \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanska \"fonetska\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvija"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nizozemska"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty raspored)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz raspored)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalska"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunjska (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunjska (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenska"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaèka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaèka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (èirilica)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tablica"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tajlandska tipkovnica"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik tipkovnica"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderna  \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinska"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US keyboard (internacionalna)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamska \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latinièna)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kru¾no montiranje %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Ukloni logièki volumen prvo\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podr¹ka vi¹e ne postoji za 2.2 kernele. Molimo koristite 2.4 kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - mi¹"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generièki PS2 mi¹ s kotaèiæem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 gumb"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generièki mi¹ s 2 gumba"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generièki"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Kotaèiæ"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generièki mi¹ s 3 gumba"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC serije"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serije"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mi¹ (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmi¹"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 gumba"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 gumba"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "niti jedan"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nema mi¹a"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Molimo istestirajte mi¹a."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Za aktiviranje mi¹a,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMAKNITE VA© KOTAÈIÆ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Zavr¹i"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Slijedeæe ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Prija¹nje"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najèe¹æi naèin da se pove¾ete sa adsl-om je pppoe.\n"
-"Neke veze koriste pptp, a nekoliko koriste dhcp.\n"
-"Ukoliko neznate, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Koji dhcp klijent ¾elite koristiti?\n"
-"Pretpostavljeni je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije pronaðen niti jedan mre¾ni adapter na va¹em sustavu.\n"
-"Ne mogu postaviti ovu vrstu veze."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Odaberite mre¾ni meðusklop"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Molimo izaberite sa kojim mre¾nim adapterom se ¾elite prikljuèiti na Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ne mogu pronaæi niti jednu mre¾nu karticu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Pode¹avam mre¾u"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molim unesite ime raèunala ukoliko ga znate.\n"
-"Neki DHCP serveri zahtjevaju specifiranje imena raèunala da bi radili.\n"
-"Va¹e ime raèunala bi trebalo biti potpuno-kvalificirano ime raèunala,\n"
-"kao ¹to je ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ime raèunala"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Èarobnjak mre¾nih postavki"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kakav tip ISDN veze koristite ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju preferirate?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. Ona sadr¾i sna¾ne\n"
-"  alate, ali je te¹ka za konfiguriranje, nije standardna.\n"
-"\n"
-"* Nova konfiguracija je lak¹a za razumiti, mnogo standardnija,\n"
-"  ali sa manje alata.\n"
-"\n"
-"Preporuèamo laku konfiguraciju.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN postavke"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite va¹eg pru¾atelja Internet usluga.\n"
-" Ako nije na popisu odaberite Drugi"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europski protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (za iznajmljene linije)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol ¾elite koristiti ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kakvu karticu posjedujete?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ukoliko imate ISA karticu, vrijednosti na slijedeæem zaslonu trebale bi biti "
-"dobre.\n"
-"\n"
-"Ukoliko imate PCMCIA karticu, morate znati irq i io va¹e kartice.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Prekini"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Nastavi"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kakvu ISDN karticu imate?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Prona¹ao sam ISDN PCI karticu meðutim ne znam kojeg je tipa. Molim izaberite "
-"va¹u PCI karticu na slijedeæem ekranu."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nisam na¹ao niti jednu ISDN PCI karticu. Molim izaberite va¹u PCI karticu na "
-"slijedeæem ekranu."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Podesi dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ime veze"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonski broj"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Prijavno ime"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Temeljem skripta"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-zasnovano"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ime domene"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS poslu¾itelj (opciono)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS poslu¾itelj (opciono)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¾ete iskljuèiti ili ponovno konfigurirati va¹u vezu."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¾ete ponovno konfigurirati va¹u vezu."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste spojeni na internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¾ete se spojiti na Internet ili ponovno konfigurirati va¹u vezu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Niste trenutno spojeni na Internet."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Povezan"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Odspoji..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Podesi mre¾u"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet veza i postava"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada æemo podesiti %s vezu."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada æemo podesiti %s vezu.\n"
-"\n"
-"\n"
-"Pritisnite U redu za nastavak."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Mre¾ne postavke"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Po¹to radite mre¾nu instalaciju, va¹a mre¾a je veæ konfigurirana.\n"
-"Pritisnite U redu da zadr¾ite postojeæe postavke, ili Odustani za ponovno "
-"konfiguriranje va¹e mre¾ne/Internet veze.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro Do¹li u Èarobnjak za pode¹avanje mre¾e\n"
-"\n"
-"Sada æemo konfigurirati va¹u internet/mre¾nu vezu.\n"
-"Ukoliko ne ¾elite koristiti auto detekciju, odselektirajte kvadratiæ s "
-"potvrdom.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za konfiguriranje"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Otkrivanje ureðaja..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normalna modemska veza"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detektiran na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN veza"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektirano %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL veza"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektirano na meðusklopu %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablovska veza"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detektirana kablovska veza"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN veza"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet kartica(e) pronaðene"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite vezu koju ¾elite podesiti"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Odabrali ste vi¹e naèina za spajanje na Internet.\n"
-"Molimo izaberite koji ¾elite koristiti.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet veza"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li ¾elite pokreniti va¹u vezu kod svakog podizanja (boot) sustava ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Mre¾ne postavke"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Mre¾a treba biti ponovno pokrenuta"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problem se pojavio prilikom ponovnog pokretanja mre¾e: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Èestitam, mre¾na i internet konfiguracija je zavr¹ena.\n"
-"\n"
-"Konfiguracija æe sada biti primjenjena na va¹em sustavu.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon ¹to je to napravljeno, preporuèamo da ponovno pokrenete va¹e X\n"
-"okru¾je kako bi izbjegli probleme prilikom promjene imena raèunala."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj ureðaj je bio prethodno konfiguriran za spajanje na "
-"Internet.\n"
-"Jednostavno prihvatite ovaj ureðaj konfiguriran.\n"
-"Promjena polja ni¾e æe prepisati ovu konfiguraciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molim unesite IP postavke za ovaj stroj.\n"
-"Svaka stavka treba biti unesena kao  IP adresa odvojena\n"
-"toèkama (npr. 1.2.3.4)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Pode¹avam mre¾ni ureðaj %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (upravljaèki program %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmaska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatski IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti oblika 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molim unesite ime raèunala.\n"
-"Ime raèunala treba biti puno ime raèunala,\n"
-"primjerice mojeracunalo.odjel.domena.hr.\n"
-"Takoðer unesite IP adresu gateway raèunala ako gateway postoji"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS poslu¾itelj"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway ureðaj"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Postava proxy-a"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Prati id mre¾ne kartice (korisno za laptope)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba biti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Postava Interneta"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li ¾elite poku¹ati spajanje na Internet ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testiram va¹u vezu..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sustav je sada spojen na Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Zbog sigurnosnih razloga, biti æe sada odspojen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Èini se kako sustav nije spojen na internet.\n"
-"Probajte ponovno podesiti va¹u vezu."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Postava Veze"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Molim ispunite ili provjerite vrijednost doljnjeg polja"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Va¹ osobni telefonski broj"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Ime ISP pru¾atelja (npr. provider.hr)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telef. broj pru¾atelja"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Pru¾ateljev DNS 1 (opciono)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Pru¾ateljev DNS 2 (opciono)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Odaberite va¹u zemlju"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Naèin biranja"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Brzina"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Vrijeme èekanja veze (u sek)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Korisnièko ime"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Korisnièka Lozinka"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Pro¹irene particije nisu podr¾ane na ovoj platformi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate rupu u svojoj particijskoj tablici meðutim ja je ne mogu iskoristiti.\n"
-"Jedino rje¹enje je da pomaknete va¹u primarnu particiju kako bi rupa bila\n"
-"odmah do pro¹irenih particija."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Vraæanje iz datoteke %s nije uspjelo: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gre¹ka prilikom pisanja u datoteku %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ne¹to lo¹e se de¹ava sa va¹im pogonom. \n"
-"Test za provjeru integriteta podataka je neuspje¹an. \n"
-"To znaèi da pisanje bilo èega na va¹ disk rezultira sluèajnim smeæem"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "potrebno"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "va¾no"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "vrlo lijepo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "lijepo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo¾da"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nova Generacija"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Ispi¹i, Bez Reda"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokalni pisaè"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Udaljeni pisaè"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Pisaè na udaljenom CUPS poslu¾itelju"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Pisaè na udaljenom lpd poslu¾itelju"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Mre¾ni pisaè (TCP/socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Pisaè na SMB/Windows 95/98/NT poslu¾itelju"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Pisaè na NetWare poslu¾itelju"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Unesite URI pisaèa"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Proslijedi (pipe) na komandu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nepoznati model"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Lokalni pisaè"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Udaljeni pisaè"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Gre¹ka prilikom pisanja u datoteku %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raw printer (Bez upravljaèkog programa)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na ovom raèunalu)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP CUPS poslu¾itelja"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Uobièajeno)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Odaberite vezu pisaèa"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je pisaè povezan?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Pisaèe na udaljenom CUPS poslu¾itelju ne morate konfigurirati\n"
-"ovdje; ti pisaèi æe biti automatski pronaðeni. Molim,\n"
-"izaberite \"Pisaè na udaljenom CUPS poslu¾itelju\" u tom sluèaju."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN postavke"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Udaljeni CUPS poslu¾itelj"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba izgledati poput 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Broj porta bi trebao biti cjelobrojni broj!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP CUPS poslu¾itelja"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatska CUPS konfiguracija"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Otkrivanje ureðaja ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Isku¹aj portove"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nema pisaèa"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Lokalni pisaè"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Automatski pronalazak pisaèa"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatski pronalazak pisaèa"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Ime udaljenog pisaèa"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detektirano %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Unesite URI pisaèa"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Lokalni pisaè"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Unesite URI pisaèa"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Postava Interneta"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Èitam bazu pisaèa ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Èitam bazu pisaèa ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Postavke udaljenog lpd pisaèa"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Ukoliko ¾elite koristiti udaljeni lpd red morate unijeti\n"
-"ime ispisnog poslu¾itelja te ime reda na poslu¾itelju\n"
-"na koji ¾elite ispisivati."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Udaljeno ime raèunala"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ime udaljenog pisaèa"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nedostaje ime raèunala udaljenog pisaèa!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nedostaje ime udaljenog pisaèa!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Postavke SMB (Windows 9x/NT) pisaèa"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Za ispis na SMB pisaè, trebate navesti\n"
-"ime SMB domaæina (Primjetite da mo¾e biti razlièit od TCP/IP imena "
-"raèunala)\n"
-"i vjerojatno IP adresu poslu¾itelja pisaèa, kao i\n"
-"ime dijeljenog resursa za pisaè kojem ¾elite pristupiti i bilo koje\n"
-"primjenjivo korisnièko ime, lozinku ili informacije o radnoj grupi."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB poslu¾itelj"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP SMB poslu¾itelja"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Ime sharea"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ime poslu¾itelja ili IP poslu¾itelja mora biti naveden!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Ime dijeljenog samba resursa nedostaje!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Postavke NetWare pisaèa"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Za ispis na NetWare pisaè, trebate navesti\n"
-"NetWare ime poslu¾itelja pisaèa (Primjetite da mo¾e biti razlièit od\n"
-"njegovog TCP/IP imena raèunala!) kao i ime ispisnog reda za piaè koji\n"
-"¾elite pristupiti kao i primjenjivo korisnièko ime i lozinku."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Ispisni poslu¾itelj"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Ime reda pisaèa"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Ime NCP poslu¾itelja nedostaje!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nedostaje ime NCP reda!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcije socket pisaèa"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Za ispis na socket pisaè, trebate navesti \n"
-"ime poslu¾itelja od printera te opciono broj porta."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Ime raèunala od pisaèa"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nedostaje ime raèunala od pisaèa!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Ureðaja pisaèa"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Ispravan URI mora biti une¹en!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svaki pisaè treba ime (na primjer lp).\n"
-"Polja opisa i lokacije ne mora biti \n"
-"popunjeno. To su komentari za korisnike."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Ime pisaèa"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu pisaèa ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Ime udaljenog pisaèa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Ime udaljenog pisaèa"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Izabir modela pisaèa"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Kakav model pisaèa imate?"
-
-#: ../../printerdrake.pm_.c:1141
-#, fuzzy
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Molim, provjerite da li je Printerdrake \n"
-"automatski prona¹ao va¹ model pisaèa\n"
-"ispravno. Pronaðite ispravan model u\n"
-"popisu ukoliko pokazivaè pokazuje a\n"
-"krivi model ili na \"Raw pisaè\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter konfiguracija"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguracija"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s je izvan dosega!<"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li ¾elite postaviti ovaj pisaè (\"%s\")\n"
-"kao podrazumijevani pisaè?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testne stranice"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Bez testnih stranica"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Ispi¹i"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardna testna stranica"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna stranica (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna stranica (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto testna stranica"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna/e stranica/e su poslane na pisaè.\n"
-"Mo¾e potrajati neko vrijeme dok ispisivanje ne zapoène.\n"
-"Status ispisa:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Probna stranica(e) poslana je na pisaè.\n"
-"Ponekad je potrebno par sekundi prije nego pisaè poène s ispisom.\n"
-"Da li sve radi kako treba?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nema pisaèa"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Onemoguæujem mre¾u"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Onemoguæujem mre¾u"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Postavke pisaèa"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Postava Interneta"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ime pisaèa mo¾e sadr¾avati samo slova, brojeve i podvlaku"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Pisaè \"%s\" veæ postoji,\n"
-"da li zaista ¾elite prepisati njegovu konfiguraciju?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novo ime pisaèa"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Postavke pisaèa"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Pokreæem va¹u vezu..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Podesi mre¾u"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Niste podesili monitor"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Pode¹avam mre¾u"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Koji ispisni sustav ¾elite koristiti?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Visok"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidan"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Koji ispisni sustav ¾elite koristiti?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Odaberite vezu pisaèa"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji ispisni sustav ¾elite koristiti?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podesi pisaè"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Postavke pisaèa"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Podesi pisaè"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Da li ¾elite podesiti pisaè?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Pisac"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Podesi mre¾u"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Da li ¾elite isku¹ati postavu ?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Postavke modema"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Da li ¾elite isku¹ati postavu ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Veza pisaèa"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Da li ¾elite isku¹ati postavu ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Postavke udaljenog pisaèa"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Podrazumijevani pisaè"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li ¾elite ponovno pokrenuti mre¾u?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Èitam CUPS bazu upravljaèkih programa..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Postava proxy-a"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobro do¹li u pomoæni program za konfiguriranje proxy-a.\n"
-"\n"
-"Ovdje æete moæi postaviti va¹ http i ftp proxi-e\n"
-"sa ili bez logina i lozinke\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molimo popunite http proxy informacije\n"
-"Molimo ostavite prazno ukoliko ne ¾elite http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba poèeti sa 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Broj porta bi trebao biti numerièki"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molimo unesite ftp proxy informacije\n"
-"Ostavite prazno ukoliko ne ¾elite ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba poèeti sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Molimo unesite proxy login i lozinku ukoliko postoje.\n"
-"Ostavite prazno ako ne ¾elite login/lozinku"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lozinka"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ponovno unesite lozinku"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Lozinke se ne podudaraju. Poku¹ajte ponovno!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatirani_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne mogu pisati u datoteku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (mo¾da niste instalirali raidtools alate?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA (Naprednu Linux Zvuènu Arhitekturu) zvuèni sustav"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron periodno zakazivanje komandi"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd slu¾i za monitoriranje statusa i baterije i njegovo logiranje putem "
-"syslog-a.\n"
-"Takoðer mo¾e biti kori¹ten za ga¹enje raèunala kada je baterija slaba."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreæe komande zakazane sa at komandom u specifirano vrijeme kada\n"
-"je at pokrenut, i pokreæe batch komande kada je prosjeèna zauzetost dovoljno "
-"niska."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardan UNIX program koji pokreæe korisnièki definirane programe\n"
-"u periodièno zakazana vremena. vixie cron dodaje veliki broj korisnih "
-"funkcija obiènom UNIX cron-u, ukljuèujuæi bolju sigurnost i veæu snagu "
-"konfiguracijskih opcija."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podr¹ku za mi¹u tekst baziranim Linux aplikacijama kao ¹to je\n"
-"Midnight Commander. Takoðer pru¾a mi¹ baziranim konzolama odre¾i-i-zalijepi "
-"operacije,\n"
-"i ukljuèuje podr¹ku za iskoèive menije u konzoli."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokreæe isprobavanje hardware-a, i opciono konfigurira\n"
-"novi/promjenjeni hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web poslu¾itelj. Koristi se za poslu¾ivanje HTML\n"
-"dokumenata i CGI skripti."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver demon (najèe¹æe zvan inetd) pokreæe \n"
-"razne druge internet servise po potrebi. Odgovoran je za pokretanje \n"
-"mnogo servisa, ukljuèujuæi telnet, ftp, rsh, i rlogin. Iskljuèivanje inetd-"
-"a\n"
-"onemoguèuje sve servise za koje je zadu¾en."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokreæe paketno filtriranje za Linux kernel 2.2 serije, za postavljanje\n"
-"vatrozida za za¹titu va¹eg raèunala od mre¾nih napada."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket uèitava odabranu tastaturnu mapu kao ¹to je postavljenu u\n"
-"/etc/sysconfig/keyboard. Ona se mo¾e odabrati koristeæi kbdconfig alat.\n"
-"Trebali biste ostaviti ovo ukljuèeno za veæinu raèunala."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regeneriranje kernel header-a u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatska detekcija i konfiguracija hardware-a pri podizanju."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf æe ponekada urediti izvr¹avanje raznih radnji\n"
-"pri samom podizanju kako bi odr¾ao sustavsku konfiguraciju."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je daemon za ispis koji je potreban od lpr-a kako bi radio ispravno.\n"
-"On je pojednostavljeno poslu¾itelj koji ¹alje ispisne poslove pisaèu(ima)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtualni Poslu¾itelj, koristi se za pravljenje visoko raspolo¾ivog\n"
-"poslu¾itelja visokih performansi."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) poslu¾itelj koji se upotrebljava\n"
-"za razluèivanje imena raèunala u IP adrese."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i Demontira sve Mre¾ne datoteène sustave (NFS), SMB (Lan\n"
-"Manager/Windows), i NCP (NetWare) toèke montiranja."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/Deaktivira sva pode¹ena mre¾na suèelja prilikom pokretanja\n"
-"sustava."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mre¾a.\n"
-"Ovaj servis pru¾a NFS poslu¾iteljsku funkcionalnost, koji se konfigurira\n"
-"putem /etc/exports datoteke."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mre¾a.\n"
-"Ovaj servis pru¾a funkcionalnost NFS datoteènog zakljuèavanja."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski ukljuèuje numlock tipku u konzoli i\n"
-"XFree-u pri podizanju."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podr¾ava OKI 4w i kompaktibilne win pisaèe."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podr¹ka je obièno za podr¾avanje stvari poput ethernet i\n"
-"modema u laptopima. Ona neæe biti pokrenuta ukoliko nije tako\n"
-" konfigurirana zato je sigurno pokrenuti ju iako na instaliranom\n"
-" raèunalu ne treba."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper ureðuje RPC vezama, koje su kori¹tene u protokolima\n"
-"poput NFS-a ili NIS-a. Portmap poslu¾itelj mora biti pokrenut na raèunalima\n"
-"koji su poslu¾itelji za protokole koji se slu¾e RPC mehanizmima."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, koji je program koji\n"
-"¹alje mail-ove sa jedne ma¹ine na drugu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sprema i vraæa sustavsku entropiju za veæu kvalitetu generiranja\n"
-"sluèajnih brojeva."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodjeljuje raw ureðaje (kao ¹to su hard disk\n"
-"particije), za uporabu u aplikacijama kao ¹to su Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon omoguæava automatsku IP ruter tablicu koja se obnavlja\n"
-"putem RIP protokola. Dok se RIP naj¹ire koristi na malim mre¾ama, vi¹e "
-"kompleksniji\n"
-"ruting protokoli su potrebni za kompleksnije mre¾e."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol omoguæava korisnicima na mre¾i da dohvate\n"
-"mjerljive performanse za svako raèunalo koje je na mre¾i."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol omoguæava korisnicima na mre¾i da identificira tko je\n"
-"prijavljen na drugim raèunalima koja odgovaraju."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho protokol omoguæava udaljenim korisnicima da dobiju popis svih\n"
-"korisnika prijavljenih na raèunalo na kojima je pokrenut rwho (slièno finger-"
-"u)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Pokreni zvuèni sustav na va¹em raèunalu"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je resurs kojega koriste mnogi demoni kako bi logirali poruke\n"
-"u razlièite sustavske log datoteke. Dobra je ideja uvijek imati pokrenuti "
-"syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Uèitava upravljaèke programe za va¹e usb ureðaje."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreæe X Pismovni Poslu¾itelj (ovo je nu¾no za XFree da se pokrene)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi trebaju biti startani automatski kod boot-a"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Ispisujem"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistemski mod"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Postavke udaljenog lpd pisaèa"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Baze"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ureðaj"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "pokreæem"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i daemoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, ¾alim."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri pokretanju"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Status:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internet pristup"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Razvoj"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Mre¾ni meðusklop"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB poslu¾itelj"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ekspert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instaliram paket %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu proèitati va¹u particijsku tablicu, previ¹e je uni¹tena za mene :(\n"
-"Poku¹ati æu sa brisanjem lo¹ih particija"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Gre¹ka"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Postava nakon instalacije"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Èestitke!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instaliraj"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Dodaj korisnika"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Odabir paketa"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Ukloni zapis"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Ukloni Windowse(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Korisnièko ime"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Molimo istestirajte mi¹a."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Molim poku¹ajte ponovo"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Molim poku¹ajte ponovo"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "ponovno unesite lozinku"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN veza"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Odaberite vezu pisaèa"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Molim izaberite raspored tipkovnice."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Molim kliknite na particiju"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Molimo istestirajte mi¹a."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Mre¾ni meðusklop"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Korisnièko ime"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Molim izaberite jezik koji ¾elite koristiti."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Otkrivanje hard diskova"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Korisnièko ime"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Kotaèiæ"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Kotaèiæ"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Postavke modula:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Mre¾ne postavke"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Podesi datoteène sustave"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcije"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Mre¾ne postavke"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Molim izaberite koju vrstu mi¹a koristite."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Molim izaberite koju vrstu mi¹a koristite."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Ostali"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instaliraj sustav"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Prilagoðeno"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Prija¹nje"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Prilagoðeno"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Slijedeæe ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Izabir instaliranih paketa"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Molim izaberite jezik koji ¾elite koristiti."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Molim izaberite jezik koji ¾elite koristiti."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Molim izaberite jezik koji ¾elite koristiti."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Lo¹a backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Otkrivanje ureðaja..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Molimo istestirajte mi¹a."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Mre¾ne postavke"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Mre¾ne postavke"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Podesi datoteène sustave"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %s-a nije uspjela. Prijavljena je slijedeæa gre¹ska:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "ne mogu pronaæi niti jednu mre¾nu karticu"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Gotov"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ogranièi"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatiraj particije"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Toèka montiranja"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izaberite particije koje ¾elite formatirati"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Ured"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Prekini"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Pisac"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instaliraj sustav"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Odaberite datoteku"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Postavke udaljenog pisaèa"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Init poruka"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nema mre¾nog adaptera na va¹em sustavu!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instaliraj"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nema mre¾nog adaptera na va¹em sustavu!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Izlaz iz instalacije"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje veze prema internetu je trenutno omoguæeno"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema internetu je veæ napravljeno.\n"
-"Trenutno je omoguæeno.\n"
-"\n"
-"©to ¾elite napraviti?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "onemoguæi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "odustani"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ponovno postavi"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Onemoguæujem poslu¾itelje..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Dijeljenje veze prema Internetu je trenutno onemoguæeno."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje veze prema Internetu je trenutno onemoguæeno"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema Internetu je veæ napravljeno.\n"
-"Trenutno je onemoguæeno.\n"
-"\n"
-"©to ¾elite napraviti?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "omoguæi"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Omoguæujem poslu¾itelje..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Dijeljenje veze prema internetu je trenutno omoguæeno."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Va¹e raèunalo mo¾e biti konfigurirano da dijeli vlastitu Internet vezu.\n"
-"Sa tom znaèajkom, druga raèunala na va¹oj lokalnoj mre¾i mogu koristiti "
-"Internet vezu ovog raèunala.\n"
-"\n"
-"Upozorenje: trebati æete primjenjeni Mre¾ni Ureðaj za postavljanje lokalne "
-"mre¾e (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Meðusklop %s (koristi modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Meðusklop %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nema mre¾nog adaptera na va¹em sustavu!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nije pronaðen niti jedan mre¾ni adapter na va¹em sustavu. Molimo pokrenite "
-"hardware-ski konfiguracijski alat."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Mre¾ni meðusklop"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Postoji samo jedan konfigurirani mre¾ni adapter na va¹em sustavu:\n"
-"\n"
-"%s\n"
-"\n"
-"Postaviti æu lokalnu mre¾u (LAN) sa tim adapterom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molimo odaberite koji mre¾ni adapter æe biti povezan na va¹u lokalnu mre¾u."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Niste podesili monitor"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Postavke modema"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP CUPS poslu¾itelja"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalni LAN adresni konflikt je pronaðen u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Detektirana je vatrozidna konfiguracija!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje! Postojeæa vatrozidna konfiguracija je pronaðena. Morati æete "
-"ruèno popraviti neke dijelove nakon instalacije."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Pode¹avam..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Pode¹avam skriptove, instaliram softver, pokreæem poslu¾itelje..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem prilikom instaliranja paketa %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je konfigurirano.\n"
-"Sada mo¾ete dijeliti va¹u internet vezu sa drugim raèunalima na va¹oj "
-"lokalnoj mre¾i, koristeæi automatsku mre¾nu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Postavljanje je veæ uraðeno, ali je trenutno onemoguæeno."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Postavljanje je veæ uraðeno, ali je trenutno omoguæeno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje veze prema internetu nije bilo konfigurirano."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Postavke dijeljenja internet veze"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobro do¹li u alat za konfiguriranje dijeljenja Internet veze!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Postavke ukoliko ¾elite pokreniti èarobnjak za postavljanja."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Mre¾ne postavke (%d adaptera)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Obri¹i profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil za obrisati:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ime raèunala: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet pristup"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Meðusklop:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Pode¹avanje Internet Pristupa..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Upravljaèki program"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Meðusklop"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Podesi lokalnu mre¾u..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Èarobnjak..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Primjeni"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo prièekajte... Primjenjujem konfiguraciju"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Povezan"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nije povezan"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Pove¾i..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Odspoji..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate niti jedan konfigurirani meðusklop.\n"
-"Konfigurirajte ga prvo klikanjem na 'Postavljanje'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Pokrenuto pri podizanju"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate niti jednu internet vezu.\n"
-"Napravite jednu klikanjem na 'Podesi'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Postava Internet veze"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Postava Internet veze"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip veze: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Pode¹avam sigurnosni nivo"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koje ¾elite koristiti"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadska (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandska"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serijski"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uporaba: keyboarddrake [--exper] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Molim izaberite raspored tipkovnice."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Da li ¾elite da BackSpace vrati Delete u konzoli?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Promjeni Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Molimo ubacite Instalacijski Cd-Rom u va¹ pogon i pritisnite U redu kada ste "
-"zavr¹ili.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli ¾ivu nadogradnju."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu pokrenuti ¾ivu nadogradnju !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "<control>N"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:103
-#, fuzzy
-msgid "/File/_Open"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:103
-#, fuzzy
-msgid "<control>O"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:104
-#, fuzzy
-msgid "/File/_Save"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:104
-#, fuzzy
-msgid "<control>S"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-#, fuzzy
-msgid "/File/-"
-msgstr "/_Datoteka"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Opcije"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Opcije"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Korisnièko ime"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Testne stranice"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Procjenjujem"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Izaberite datoteku"
-
-#: ../../standalone/logdrake_.c:201
-#, fuzzy
-msgid "Calendar"
-msgstr "Standardno"
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Spoji se na Internet"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Molimo prièekajte, Pripremam instalaciju"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Postava Interneta"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Dobro do¹li u pomoæni program za konfiguriranje proxy-a.\n"
-"\n"
-"Ovdje æete moæi postaviti va¹ http i ftp proxi-e\n"
-"sa ili bez logina i lozinke\n"
-
-# ../../share/compssUsers
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Izlaz"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ureðaj"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatiram"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Postava Interneta"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Molim izaberite koju vrstu mi¹a koristite."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "niti jedan serial_usb nije pronaðen\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuliranje treæe tipke?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Odaberite grafièku karticu"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot ureðaj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Vatrozidne postave"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Vatrozidne postave"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Vatrozidi\n"
-"\n"
-"Veæ ste postavili vatrozid.\n"
-"Kliknite na Podesi za promjenu ili brisanje vatrozida"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Vatrozidi\n"
-"\n"
-"Kliknite na Podesi za postavljanje standardnog vatrozida"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Odaberite jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Odaberite razred instalacije"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Otkrivanje hard diskova"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Podesi mi¹"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Odaberite tipkovnicu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podesi datoteène sustave"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiraj particije"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izabir instaliranih paketa"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instaliraj sustav"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodaj korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podesi mre¾u"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Pode¹avanje servisa"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instaliraj bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Napravi boot disketu"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Podesi X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instaliraj sustav"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Izlaz iz instalacije"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall pode¹avanje\n"
-"\n"
-"Ovo pode¹ava osobni vatrozid za ovo Mandrake Linux raèunalo.\n"
-"Za sna¾no primjenjena vatrozidna rje¹enja, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada æemo vas pitati nekoliko pitanja o servisima koje ¾elite dozvoliti\n"
-"Internetu da se spoji. Molimo razmislite pa¾ljivo o tim\n"
-"pitanjima, jer sigurnost va¹eg raèunala je va¾na.\n"
-"\n"
-"Molimo, ukoliko ne koristite trenutno jedan od tih servisa, postavite\n"
-"vatrozid. Mo¾ete promjeniti ovu konfiguraciju bilo kad za¾elite\n"
-"pokretanjem ponovno ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut web poslu¾itelj na ovom raèunalu kojeg treba cijeli\n"
-"Internet vidjeti? Ukoliko trebate web poslu¾itelj kojemu æe biti pristupan\n"
-"samo sa ovog raèunala, mo¾ete sigurno odgovoriti NE ovdje.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut imenski poslu¾itelj na ovom raèunalu? Ukoliko niste "
-"postavili jedan\n"
-"da daje IP i informacije o zoni cijelom Internet-u, molimo\n"
-"odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li ¾elite omoguæiti dolazeæe Secure Shell (ssh) veze? To je\n"
-"je telnet zamjena ¹to mo¾ete koristiti za prijavljivanje. Ako sada "
-"koristite\n"
-"telnet, trebali biste definitivno se prebaciti na ssh. telnet nije\n"
-"enkriptiran -- tako da neki napadaèi mogu ukrasti va¹e lozinke ako ga "
-"koristite\n"
-"ssh je enkriptiran i nedozvoljava prislu¹kivanje (sniffanje)."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li ¾elite dopustiti dolazeæe telnet veze?\n"
-"Ovo je u¾asno nesigurno, kao ¹to smo objasnili na prethodnom zaslonu. Mi\n"
-"jako preporuèamo odgovaranjem Ne ovdje i kori¹tenjem ssh-a umjesto\n"
-"telnet-a.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li imate pokrenut FTP poslu¾itelj ovdje koji treba biti dostupan\n"
-"Internet-u? Ukoliko da, jako preporuèamo da ga koristite samo za\n"
-"anonimni prijenos. Svaka lozinka prenesena FTP-om mo¾e biti ukradena od\n"
-"nekih napadaèa, jer FTP takoðer ne koristi enkripciju za prijenos lozinki.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut mail poslu¾itelj ovdje? Ako ¹aljete va¹e \n"
-"poruke kroz pine, mutt ili neki drugi tekst-bazirani mail klijent,\n"
-"vjerojatno ga koristite. Ako ne, trebali biste ga odijeliti vatrozidom.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut POP ili IMAP poslu¾itelj ovdje? Ovo mo¾e\n"
-"koristiti za poslu¾ivanje ne-web-baziranih mail raèuna za osobe preko\n"
-"ovog raèunala.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Èini se da imate pokrenut 2.2 kernel. Ukoliko je va¹a IP\n"
-"adresa automatski postavljena u va¹em domu ili uredu\n"
-"(dinamièki dodjeljenja), moramo to dozvoliti. Da\n"
-"li je to sluèaj?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li se va¹e raèunalo vremenski sinkronizira sa drugim raèunalom?\n"
-"Veæinom, ovo se koristi kod srednje-velikih Unix/Linux organizacija\n"
-"za sinkronizaciju vremena za zapisivanje/logiranje i slièno. Ukoliko\n"
-"niste dio veæeg ureda ili niste èuli za ovo, vjerojatno\n"
-"ne."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Pode¹avanje zavr¹eno. Mo¾emo li zapisati ove promjene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu otvoriti %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu otvoriti %s za pisanje: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Vatrozidne postave"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Molimo prièekajte, Pripremam instalaciju"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mre¾no raèunalo (klijent)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS poslu¾itelj, SMB poslu¾itelj, Proxy poslu¾itelj, SSH poslu¾itelj"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ured"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za va¹ Palm Pilot ili va¹ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Vatrozid/Ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Ime Domene i Mre¾ni Informacijki Poslu¾itelj (NIS)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: tekst procesori (kword, abiword), tablièni kalkulatori "
-"(kspread, gnumeric), pdf preglednici, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-namjenjeni alati: mp3 ili midi sviraèi, mikseri, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Howto-i o Linux-u i slobodnom software-u"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skup alata za mail, news, web, datoteèni prijenos, i razgovor"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Baze"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL poslu¾itelj baza"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lako pode¹avanje va¹eg raèunala"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Pomoæni programi"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolni Alati"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail poslu¾itelj, Inn news poslu¾itelj"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijska stanica"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN postavke"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Vi¹e grafièkih radnih okru¾ja (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Radno Okru¾je, osnovno grafièko okru¾je sa kolekcijom pripadajuæih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafièko Okru¾je"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za pravljenje i pr¾enje CD-a"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Poslu¾itelj"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafièki programi poput Gimp-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi i ukljuèujuæe datoteke"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Mre¾ni raèunalni poslu¾itelj"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Igraèka radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video playeri i ureðivaèi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkade, ploèe, strategije, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Pribor alata za èitanje i slanje mail-a i news-a (pine, mutt, tin..) i za "
-"pregled Web-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, praæenje"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Osobne financije"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafièka okru¾ja sa korisnièki prijateljskim skupom aplikacija i alatima za "
-"radno okru¾je"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole ukljuèujuæi ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Zvuèni i video sviraèki/ureðivaèki programi"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Druga grafièka radna okru¾ja"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Ureðivaèi, ljuske, datoteèni alati, terminali"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za ureðivanje va¹ih financija, poput gnucash-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Osobni informacijski menad¾ment"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD pr¾enje"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Znanstvena radna stanica"
diff --git a/perl-install/share/po/hu.po b/perl-install/share/po/hu.po
deleted file mode 100644
index fd44cc152..000000000
--- a/perl-install/share/po/hu.po
+++ /dev/null
@@ -1,12496 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 2000 Mandrakesoft
-# KOVACS Emese Alexandra <emese@itp.hu>, 2000, 2001
-# Kultsar Kadosa Atilla <kadi@kadi.emg.hu>, 2000
-# Takacs Sandor <taki@dfmk.hu>, 2000
-# Timar Andras <atimar@itp.hu>, 2000
-# Sari Gabor <saga@tux.hu>, 2000
-# Tamas Szanto <tszanto@mol.hu>, 2001
-# Arpad Biro <biro_arpad@yahoo.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 01:27GMT+1\n"
-"Last-Translator: Arpad Biro <biro_arpad@yahoo.com>\n"
-"Language-Team: Hungarian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "A képernyõk egymástól független beállítása"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "A Xinerama kiterjesztés használata"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Csak a(z) \"%s\" (%s) kártya beállítása"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "A többképernyõs mód beállítása"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"A grafikus kártya lehetõvé teszi több képernyõ használatát.\n"
-"Mit szeretne tenni?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikus kártya"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Válasszon egy grafikus kártyát"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Válasszon egy X-kiszolgálót"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-kiszolgáló"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Válasszon egy X-meghajtót"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-meghajtó"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Melyik XFree-t szeretné használni?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást, de csak az XFree %s verzióban.\n"
-"Az XFree %s is használható; elképzelhetõ, hogy abban jobb a 2D-s támogatás."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "A kártya támogat hardveres 3D-s gyorsítást az XFree %s verzióval."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s hardveres 3D-s gyorsítással"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást az XFree %s verzióban,\n"
-"DE EZ KÍSÉRLETI JELLEGÛ, HASZNÁLATA AKÁR A GÉP LEFAGYÁSÁHOZ IS VEZETHET!"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s KÍSÉRLETI JELLEGÛ hardveres 3D-s gyorsítással"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást, de csak az XFree %s verzióban.\n"
-"EZ KÍSÉRLETI JELLEGÛ; HASZNÁLATA AKÁR A GÉP LEFAGYÁSÁHOZ IS VEZETHET.\n"
-"Az XFree %s verzió is használható; elképzelhetõ, hogy ebben jobb a 2D-s\n"
-"támogatás."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (telepítési meghajtóprogram)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree-beállítások"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Válassza ki a grafikus kártyán található memória mennyiségét"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Az X beállításai"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "A monitor kiválasztása"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"A két legfontosabb paraméter a függõleges frissítés frekvenciája (a teljes\n"
-"képernyõ frissítési gyorsasága) és a vízszintes frissítés frekvenciája (a\n"
-"vízszintes sorok megjelenítésének gyorsasága).\n"
-"\n"
-"NAGYON FONTOS, hogy egyik se lépje túl a monitorhoz engedélyezett\n"
-"felsõ határértéket, mert ilyenkor esetleg a monitor megsérülhet.\n"
-"Ha nem ismeri a monitor jellemzõit, válasszon egy biztonságosan\n"
-"alacsony értéket!"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Vízszintes frissítés"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Függõleges frissítés"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "A monitor nincs beállítva"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "A grafikus kártya még nincs beállítva"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "A felbontások még nincsenek beállítva"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ki szeretné próbálni a beállításokat?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Vigyázat! A grafikus kártya kipróbálása esetleg a gép lefagyásához is "
-"vezethet!"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "A beállítások kipróbálása"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"változtasson meg néhány paramétert"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Hiba történt:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Kilépés %d másodperc múlva"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Megfelelõ ez a beállítás?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hiba történt, változtasson meg néhány paramétert"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Felbontás"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Válassza ki a felbontást és a színmélységet"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikus kártya: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Egyéb"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Szakértõi mód"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mindent mutasson"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Felbontások"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Billentyûzetkiosztás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Az egér típusa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Az egeret kezelõ eszköz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "A vízsz. frissítési frekvencia: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "A függ. frissítési frekvencia: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "A grafikus kártya: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "A grafikus kártya azonosítója: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "A kártya memóriája: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Színmélység: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Felbontás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-meghajtó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Az X beállításának elõkészítése"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mit szeretne tenni?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "A monitor módosítása"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "A grafikus kártya módosítása"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Az X beállításainak módosítása"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "A felbontás módosítása"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Az adatok megjelenítése"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Még egy próba"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Kilépés"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Meg szeretné tartani a módosításokat?\n"
-"A jelenlegi beállítás:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Grafikus módú bejelentkezés"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Beállítható, hogy rendszerindításkor az X automatikusan elinduljon.\n"
-"Szeretne grafikus módú bejelentkezést?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-"A módosítások csak a(z) %s programba való következõ bejelentkezéskor lépnek "
-"érvénybe"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Jelentkezzen ki, majd nyomja meg a Ctrl+Alt+BackSpace billentyûkombinációt"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 szín (8-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ezer szín (15-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ezer szín (16-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millió szín (24-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliárd szín (32-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB vagy több"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480, 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600, 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-kompatibilis, 1024x768, 87 Hz, váltottsoros (nincs 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768, 87 Hz, váltottsoros, 800x600 56 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600, 60 Hz, 640x480 72 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Nem váltottsoros SVGA, 1024x768, 60 Hz, 800x600 72 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Magas frekvenciájú SVGA, 1024x768, 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 60 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 74 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 76 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Olyan monitor, amely képes 1600x1200-ra 70 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Olyan monitor, amely képes 1600x1200-ra 76 Hz-en"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "A rendszerindítási partíció elsõ szektora"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "A lemezmeghajtó legelsõ szektora (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "A SILO telepítése"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hová kerüljön a rendszerindító program (bootloader)?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "A LILO/GRUB telepítése"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO, szöveges menüvel"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO, grafikus menüvel"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "GRUB"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Indítás DOS-ból vagy Windows-ból (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Rendszerindítási beállítások"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "A használni kívánt rendszerbetöltõ"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "A rendszerindító program telepítése"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Rendszerindítási eszköz"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nem mûködik régi BIOS-okkal)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Képernyõmód"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Várakozási idõ az alapértelmezett rendszer betöltése elõtt"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Jelszó"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Jelszó (még egyszer)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "A parancssorban átadható paraméterek korlátozása"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "korlátozás"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "A /tmp törlése minden újraindulásnál"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "A RAM mérete, ha szükséges (%d MB-ot detektáltam)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Több profil engedélyezése"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "A fizikai memória mérete MB-ban"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"\"A parancssorban átadható paraméterek korlátozása\" beállításnak jelszó "
-"nélkül nincs értelme"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Próbálja meg újra"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "A jelszavak nem egyeznek"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Indítási üzenet"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Késleltetés Open Firmware-nél"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Várakozási idõ rendszerindításkor"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD-rõl történhet rendszerindítás?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF-rõl történhet rendszerindítás?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Az alapértelmezett op. rendszer?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Azt a lehetõséget választotta, hogy a rendszerbetöltõt egy partícióra "
-"telepíti.\n"
-"Ez arra utal, hogy már van rendszerbetöltõ (például: System Commander) azon "
-"a\n"
-"merevlemezen, amelyrõl a rendszer indítása történik.\n"
-"\n"
-"Melyik meghajtóról végzi a rendszer indítását?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Itt láthatók a jelenlegi bejegyzések.\n"
-"Új bejegyzések vehetõk fel, illetve módosíthatók a meglevõk."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Hozzáadás"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Kész"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Módosítás"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Milyen bejegyzést szeretne felvenni?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Egyéb op. rendszer (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Egyéb op. rendszer (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Egyéb op. rendszer (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Indítófájl"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Gyökér"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Hozzáfûzés"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Kezdeti RAM-diszk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Írható-olvasható"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tábla"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nem biztonságos"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Címke"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Alapértelmezés"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "A RAM-diszk mérete"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Bejegyzés eltávolítása"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "A címke nem lehet üres"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Meg kell adni egy kernelfájlt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Meg kell adni egy gyökérpartíciót"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Már van ilyen nevû címke"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s csatolót találtam"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Van még másik is?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Van valamilyen %s csatoló?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nem"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Igen"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "A hardverjellemzõk megjelenítése"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Meghajtóprogram telepítése ehhez a(z) %s-kártyához: %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modul)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Melyik %s-meghajtóprogramot próbáljam meg?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bizonyos esetekben a(z) %s meghajtóprogramnak további paraméterekre van\n"
-"szüksége a helyes mûködéshez. Szeretne további paramétereket megadni a\n"
-"meghajtóprogramnak, vagy hagyja, hogy az lekérdezze a szükséges\n"
-"információkat? Bizonyos körülmények esetén az automatikus detektálás\n"
-"a gép lefagyásához vezethet, de komolyabb kárt nem okozhat."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatikus detektálás"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Paraméterek megadása"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Most megadhatók a(z) \"%s\" modul paraméterei.\n"
-"A címeket \"0x\" elõtaggal kell megadni, például: \"0x123\"."
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Itt lehet megadni a(z) %s modul paramétereit\n"
-"a következõ formátumban: \"név1=érték1 név2=érték2 ...\".\n"
-"Például: \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "A modul paraméterei:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"A(z) %s modul betöltése nem sikerült.\n"
-"Megpróbálja a betöltést más paraméterekkel?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "hozzáférés az X-es programokhoz"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "hozzáférés az RPM-eszközökhöz"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "\"su\" engedélyezése"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "hozzáférés az adminisztrációs fájlokhoz"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(már fel van véve: %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ez a jelszó túl egyszerû"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Adjon meg egy felhasználónevet"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"A felhasználónév csak a következõket tartalmazhatja: kisbetûk, számok, \"-\" "
-"és \"_\""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Már létezik ilyen felhasználónév"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Felhasználó hozzáadása"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Adjon meg egy felhasználónevet\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Név elfogadása"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Valódi név"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Felhasználónév"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Parancsértelmezõ"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatikus bejelentkezés"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Beállítható, hogy indításkor egy felhasználó automatikusan bejelentkezzen.\n"
-"Szeretné használni ezt a lehetõséget?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Adja meg az alapértelmezett felhasználónevet:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Válassza ki a használni kívánt ablakkezelõt:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Válasszon nyelvet."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Választhat más nyelveket is, ezek a telepítés után lesznek elérhetõk."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Mind"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Az összes felhasználó engedélyezése"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Egyéni"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nincs megosztás"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "A(z) %s csomagot telepíteni kell. Szeretné telepíteni?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Exportálás NFS-sel vagy Sambával végezhetõ. Melyiket kívánja használni?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Hiányzik a(z) \"%s\" nevû kötelezõ csomag"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Szeretné engedélyezni a felhasználók számára azt, hogy a saját "
-"könyvtárukban\n"
-"levõ könyvtárakat exportáljanak?\n"
-"Ha ez engedélyezve van, akkor a felhasználók a Konquerorban és a "
-"Nautilusban\n"
-"a \"Megosztás\" funkcióval végezhetnek exportálást.\n"
-"\n"
-"Az \"Egyéni\" opció használatával felhasználónkénti beállítás lehetséges.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Mégsem"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "UserDrake indítása"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"A felhasználónkénti megosztás a \"fileshare\" csoportot használja.\n"
-"A UserDrake programmal lehet felhasználót felvenni ebbe a csoportba."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Üdvözlet a cracker-eknek"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Gyenge"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Szabványos"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Magas"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Magasabb"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiás"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ezt a szintet csak körültekintéssel használja.\n"
-"Egyszerûbbé teszi a rendszer használatát, de így az sebezhetõbb is lesz:\n"
-"ne válassza ezt a szintet, ha a gép hálózatba van kötve, vagy az "
-"internethez\n"
-"csatlakozik. A hozzáférés nincs jelszóval védve."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"A jelszavak be vannak kapcsolva, de hálózatra kapcsolódó gép esetén\n"
-"ez a konfiguráció még mindig nem ajánlott."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ez a szabványos biztonsági szint, amely az internetre (kliensként) "
-"csatlakozó gépek esetén javasolt."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Már vannak bizonyos megszorítások, és több automatikus ellenõrzés fut "
-"éjszakánként."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ezzel a biztonsági szinttel már használhatja a gépét kiszolgálóként.\n"
-"Ez a biztonsági szint elég magas ahhoz, hogy a rendszer sok, hálózaton\n"
-"keresztül csatlakozó klienst szolgáljon ki. Ha a gép az interneten csak "
-"kliensként van jelen, akkor érdemesebb egy alacsonyabb szintet választani."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Az elõzõ szinten alapul, de itt a rendszer teljesen zárt.\n"
-"Ez a legbiztonságosabb szint."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Válassza ki a biztonsági szintet"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Biztonsági szint"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "A libsafe használata kiszolgálókhoz"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Könyvtár, amely védelmet nyújt a puffertúlcsordulásos és a formátumsztringes "
-"támadások ellen."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Udvozoljuk a(z) %s rendszerinditoban!\n"
-"\n"
-"Valasszon egy operacios rendszert a listabol, vagy varjon\n"
-"%d masodpercig, amig az alapertelmezett elindul.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Udvozoljuk a GRUB rendszerindito programban!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "A(z) %c es a(z) %c billentyukkel lehet a bejegyzesek kozott lepegetni."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nyomja meg az Enter billentyut a kijelolt rendszer inditasahoz, az 'e'-t "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "az inditasi parancsok modositasahoz, vagy a 'c'-t a parancssorhoz."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A kijelolt operacios rendszer %d masodperc mulva elindul."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nincs elég hely a /boot partíción"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Asztal"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start menü"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "A rendszerindító program nem tehetõ %s partícióra\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "még nem használható a segítség\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "A rendszerindítás beállításai"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fájl"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fájl/Ki_lépés"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Új stílusú kategorizáló monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Új stílusú monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Hagyományos monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Hagyományos GTK+-monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Az Aurora indítása rendszerindításkor"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB mód"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mód"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jelenleg a(z) %s rendszerindító programot használja.\n"
-"Kattintson a Beállítás gombra a beállításvarázsló elindításához."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Beállítás"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Rendszer-mód"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Az X induljon el rendszerindításkor"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne legyen automatikus bejelentkezés"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Legyen automatikus bejelentkezés (felhasználónév, grafikus környezet)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Az /etc/inittab fájlt nem sikerült olvasásra megnyitni: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d perc"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 perc"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d másodperc"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Partícionálás elõtt nem készíthetõk képernyõfelvételek"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "A képernyõfelvételek a telepítés után itt lesznek elérhetõk: %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Franciaország"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgium"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Cseh Köztársaság"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Németország"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Görögország"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvégia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Svédország"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Hollandia"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Olaszország"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Ausztria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Amerikai Egyesült Államok"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Elõször készítsen biztonsági mentést az adatokról"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Olvassa el figyelmesen!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ha az aboot-ot fogja használni, elõször ellenõrizze, hogy maradt-e elég\n"
-"hely (legalább 2048 szektor) a lemez elején"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Hiba"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Varázsló"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Válasszon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Egy nagy FAT partíció van\n"
-"(ez gyakran egy Microsoft DOS/Windows partíció).\n"
-"Célszerû elõször átméretezni a partíciót\n"
-"(kattintson a partícióra, majd az \"Átméretezés\" gombra)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kattintson egy partícióra"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Részletek"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Naplózott fájlrendszer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Lapozóterület (swap)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Üres"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Egyéb"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Fájlrendszer-típusok:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Létrehozás"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Típus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Használja inkább ezt: \"%s\""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Törlés"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Használja elõször a \"Leválasztás\"-t"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"A(z) %s partíció típusának módosítása után a partíción levõ adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Válasszon egy partíciót"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Válasszon egy másik partíciót"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Kilépés"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Átváltás szakértõi módba"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Átváltás normál módba"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Visszavonás"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Folytassam a mûveletet?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Kilépés mentés nélkül"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Ki akar lépni a programból a partíciós tábla mentése nélkül?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "El szeretné menteni az /etc/fstab fájlban végrehajtott módosításokat?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatikus helyfoglalás"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Teljes törlés"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Merevlemez-jellemzõk"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Mindegyik elsõdleges partíció foglalt"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nem hozható létre több partíció"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"További partíciók létrehozásához törölni kell egyet (hogy egy kiterjesztett "
-"partíciót létre lehessen hozni)"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "A partíciós tábla mentése"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "A partíciós tábla visszatöltése"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "A partíciós tábla helyreállítása"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "A partíciós tábla újratöltése"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Cserélhetõ lemez automatikus csatlakoztatása"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Fájlválasztás"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A partíciós tábla két példányának mérete eltér!\n"
-"Folytassam a mûveletet?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Figyelmeztetés"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Helyezzen be egy floppylemezt a meghajtóba!\n"
-"A lemezen található adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Megpróbálom helyrehozni a partíciós táblát"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Részletes információ"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Csatlakoztatási pont"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Beállítások"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Átméretezés"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Áthelyezés"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formázás"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Csatlakoztatás"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Hozzáadás RAID-hez"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Hozzáadás LVM-hez"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Leválasztás"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Eltávolítás RAID-bõl"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Eltávolítás LVM-bõl"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID módosítása"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback-hez használva"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Új partíció létrehozása"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Kezdõszektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Méret (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "A fájlrendszer típusa: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Csatlakoztatási pont: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Beállítások: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "El szeretné távolítani a loopback fájlt?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "A partíciótípus megváltoztatása"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Melyik fájlrendszert szeretné?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertálás Ext2-rõl Ext3-ra"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hová szeretné csatlakoztatni a(z) %s loopback fájlt?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hová szeretné csatlakoztatni a(z) %s eszközt?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nem lehet megszüntetni a csatlakoztatási pontot, mert ez egy loopback\n"
-"partíció. Elõször távolítsa el a loopback-et."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "A FAT fájlrendszer jellemzõinek kiszámítása"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Átméretezés"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ezt a partíciót nem lehet átméretezni"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Készítsen biztonsági mentést errõl a partícióról"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"A(z) %s partíció átméretezésekor a partíción található adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Adja meg az új méretet"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Az új méret (MB-ban): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Melyik lemezre szeretné áthelyezni?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Szektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Melyik szektorra szeretné áthelyezni?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Áthelyezés"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partíció áthelyezése..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Válassza ki azt a RAID-et, amelyikhez hozzá szeretné adni a lemezt"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "új"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Válassza ki azt az LVM-et, amelyhez hozzá szeretné adni a lemezt"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Az LVM neve?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ez a partíció nem használható loopback-hez"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "A loopback fájl neve: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Adjon meg egy fájlnevet"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ez a fájl már egy másik loopback-hez van rendelve, válasszon egy másikat"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "A fájl már létezik, használjam?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Csatlakoztatási (mount) opciók"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Vegyes"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "eszköz"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "szint"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "szeletméret"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vigyázat! Ez a mûvelet adatvesztést okozhat."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Milyen típusú partícionálást szeretne?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Nem hozhatom létre a /boot-ot ennyire távol a merevlemez elejétõl (cilinder\n"
-"> 1024). Ha a LILO-t használja, akkor az nem fog mûködni, ha pedig nem\n"
-"használja a LILO-t, akkor nincs szükség a /boot-ra."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Az a partíció, amelyet gyökérpartíciónak (/) jelölt ki, fizikailag az 1024.\n"
-"cilinder után található, és a rendszerben nincs /boot partíció.\n"
-"Ha a LILO-t szeretné használni, hozzon létre egy /boot partíciót."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Szoftveres RAID partíciót választott ki gyökérpartíciónak (/).\n"
-"Egyik rendszerindító program sem tudja ezt kezelni /boot partíció nélkül,\n"
-"ezért mindenképpen hozzon létre egy /boot partíciót."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A(z) \"%s\" meghajtó partíciótáblájának mentése következik!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "A változások csak a rendszer újraindításakor lépnek életbe"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "A(z) %s partíció formázásakor a partíción található adatok elvesznek!"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formázás"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "A(z) %s loopback fájl formázása"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "A(z) %s partíció formázása"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Fájlok elrejtése"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Fájlok áthelyezése az új partícióra"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"A(z) %s könyvtár már tartalmaz adatot\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Fájlok áthelyezése az új partícióra"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s másolása"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s eltávolítása"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "a(z) %s partíció jelenleg \"%s\"-ként ismert"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Eszköz: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-meghajtó betûjele: %s (ez csak egy tipp)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Típus: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Név: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Kezdõszektor: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Méret: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s szektor"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "A(z) %d. cilindertõl a(z) %d.-ig\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formázva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nincs formázva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Csatlakoztatva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback fájl(ok):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Az alapértelmezett indítási partíció\n"
-"    (a DOS-nak, nem a LILO-nak)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "%s. szint\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "A szelet mérete: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID lemezek: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "A loopback fájl neve: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Ez a partíció valószínûleg\n"
-"meghajtóknak van fenntartva,\n"
-"ne módosítson rajta.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ez egy speciális rendszerindítási\n"
-"partíció (hogy többféle operációs\n"
-"rendszert lehessen indítani).\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Méret: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilinder, %s fej, %s szektor\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Információ: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-lemezek: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "A partíciós tábla típusa: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "busz: %d, id: %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Beállítások: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Fájlrendszer-titkosítási kulcs"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Válasszon fájlrendszer-titkosítási kulcsot"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ez a titkosítási kulcs túl egyszerû (legalább %d karakter hosszúnak kell "
-"lennie)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "A titkosítási kulcsok nem egyeznek"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Titkosítási kulcs"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Titkosítási kulcs (még egyszer)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "A típus megváltoztatása"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Kattintson egy médiára"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Kiszolgálók keresése"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formázás sikertelen a(z) %s eszközön"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nem tudom, hogyan kell megformázni a(z) %s eszközt %s típusúra"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "a(z) %s partíció ide történõ csatolása sikertelen: %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "Az fsck kilépett \"%d\" hibakóddal vagy \"%d\" szignállal"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "hiba történt a(z) %s leválasztásakor: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "egyszerû"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr-rel"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "kiszolgáló"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nem lehet JFS-t használni 16 MB-nál kisebb partíción"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nem lehet ReiserFS-t használni 32 MB-nál kisebb partíción"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "A csatlakoztatási pontoknak /-rel kell kezdõdni"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Már van egy partíció amelynek %s a csatlakoztatási pontja\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nem használható LVM logikai kötet a(z) %s csatlakoztatási ponthoz"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ennek a könyvtárnak a gyökér-fájlrendszeren belül kell maradnia"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Valódi fájlrendszert (Ext2, ReiserFS) kell használni ennél a csatlakoztatási "
-"pontnál\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Titkosított fájlrendszer nem használható ehhez a csatolási ponthoz: %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nincs elég szabad terület az automatikus helyfoglaláshoz"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nincs mit tenni"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Hiba történt %s írásra való megnyitásánál: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Hiba történt - nincs olyan meghajtó, amelyen új fájlrendszert lehetne "
-"létrehozni. Ellenõrizze a gépben található eszközöket."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Egyetlen partíció sincs!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"A Linux többfelhasználós rendszer; ez azt jelenti, hogy minden\n"
-"felhasználónak lehetnek például külön beállításai és saját fájljai.\n"
-"További információkat a Felhasználói Kézikönyvbõl lehet megtudni.\n"
-"A \"root\" nevû felhasználótól (ez az azonosító a rendszergazdát jelöli)\n"
-"eltérõen az itt felvett felhasználóknak csak a saját fájljaikat és a saját\n"
-"beállításaikat lesz joguk módosítani. Javasolt legalább egy \"normál\"\n"
-"felhasználót felvenni az Ön saját használatára. Ezen normál felhasználói\n"
-"azonosítóval érdemes elvégezni az olyan tevékenységeket, amelyek nem\n"
-"igényelnek rendszergazdai jogosultságot. Bár nagyon praktikus minden\n"
-"alkalommal rendszergazdaként jelentkezni be, ez nagyon veszélyes is.\n"
-"Rendszergazdaként használva a legapróbb hiba hatására is meghibásodhat\n"
-"a rendszer. Ha normál felhasználóként követ el hibát, akkor esetleg\n"
-"elveszít bizonyos adatokat, de a rendszert nem teheti tönkre.\n"
-"\n"
-"Elõször is meg kell adnia a valódi nevét. Ez természetesen nem kötelezõ;\n"
-"bármit be lehet írni névként. A telepítõ a megadott név elsõ szavát\n"
-"ajánlja fel a \"Felhasználónév\" mezõben. Ez utóbbi az a név, amellyel\n"
-"az adott felhasználó be tud majd jelentkezni a rendszerbe. A felkínált név\n"
-"módosítható. A felhasználónév megadása után meg kell adni az ahhoz tartozó\n"
-"kívánt jelszót. Egy normál felhasználó jelszava biztonsági szempontból nem\n"
-"annyira kritikus, mint a rendszergazdáé; ez viszont nem ok arra, hogy\n"
-"felületesen legyen kezelve - végül is az Ön fájljairól van szó.\n"
-"\n"
-"A \"Név elfogadása\" gombbal vehetõ fel újabb felhasználó. Bármennyi\n"
-"felhasználó létrehozható. Vegyen fel egy-egy felhasználónevet mindazok\n"
-"számára, akik a gépet használni fogják. Amikor végzett a felhasználónevek\n"
-"létrehozásával, kattintson a \"Kész\" gombra.\n"
-"\n"
-"Ha a \"Speciális\" gombra kattint, módosíthatja az adott felhasználó\n"
-"alapértelmezett parancsértelmezõjét (alapértelmezés szerint ez a \"bash\")."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Fent láthatók a lemezen talált, már létezõ linuxos partíciók.\n"
-"A varázsló javaslatai általában elfogadhatók, általános célú telepítésnél\n"
-"általában megfelelnek. Ha megváltoztatja a beállításokat, mindenképpen\n"
-"jelölje ki a gyökérpartíciót (\"/\"). Ne válassza túl kicsire, mert akkor\n"
-"nem lesz elég hely a szoftverek telepítéséhez. Ha külön partícióra\n"
-"szeretné helyezni a felhasználói adatokat, jelöljön ki egy külön \"/home\"\n"
-"partíciót (ez csak akkor lehetséges, ha legalább két Linux partíció\n"
-"létezik).\n"
-"\n"
-"A partíciók listájának mezõi: \"név\", \"kapacitás\".\n"
-"\n"
-"A \"név\" képzési szabálya: \"a merevlemez típusa\", \"a lemez\n"
-"azonosítója\", \"a partíció azonosítója\" (például \"hda1\").\n"
-"\n"
-"\"A merevlemez típusa\" \"hd\", ha a lemez IDE-csatolós, és \"sd\",\n"
-"ha SCSI-csatolós.\n"
-"\n"
-"\"A lemez azonosítója\" egy betû a \"hd\" illetve az \"sd\" után.\n"
-"IDE-csatolós merevlemezek esetén:\n"
-"\n"
-"  - \"a\" jelentése: \"elsõ (master) meghajtó az elsõ IDE-vezérlõn\"\n"
-"\n"
-"  - \"b\" jelentése: \"második (slave) meghajtó az elsõ IDE-vezérlõn\"\n"
-"\n"
-"  - \"c\" jelentése: \"elsõ meghajtó a második IDE-vezérlõn\"\n"
-"\n"
-"  - \"d\" jelentése: \"második meghajtó a második IDE-vezérlõn\"\n"
-"\n"
-"SCSI-csatolós lemezeknél az \"a\" jelentése: \"a legalacsonyabb\n"
-"SCSI-azonosító\", \"b\" jelentése: \"a második legalacsonyabb\n"
-"SCSI-azonosító\", ..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"A Mandrake Linux telepítõanyag több CD-n helyezkedik el. Ha egy "
-"kiválasztott\n"
-"csomag egy másik CD-n található, akkor a DrakX (a telepítõ) kiadja az\n"
-"aktuális CD-t, és megkéri Önt, hogy helyezzen be egy másikat."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Most meg kell adnia, mely programokat kívánja telepíteni a rendszerére.\n"
-"Több ezer program létezik Mandrake Linuxhoz; természetesen Önnek nem\n"
-"szükséges mindet ismernie.\n"
-"\n"
-"Ha szabványos telepítést végez CD-rõl, akkor elõször meg kell adnia, mely\n"
-"CD-kkel rendelkezik (csak a szakértõi módra igaz). Nézze át a CD-k címeit,\n"
-"és jelölje be az elérhetõ CD-ket a listában. Ha készen áll a folytatásra,\n"
-"kattintson az \"OK\" gombra.\n"
-"\n"
-"A csomagok a gép lehetséges felhasználási területei szerint csoportokba\n"
-"vannak rendezve. Maguk a csoportok négy szakaszba vannak sorolva:\n"
-"\n"
-"  - \"Munkaállomás\": ha munkaállomásként tervezi használni a gépet, akkor\n"
-"válasszon az ennek megfelelõ csoportok közül.\n"
-"\n"
-"  - \"Fejlesztés\": ha a gép programozásra is lesz használva, akkor\n"
-"válassza ki a kívánt csoportokat.\n"
-"\n"
-"  - \"Kiszolgáló\": ha a gép kiszolgálóként lesz használva, itt lehetõség\n"
-"van annak kiválasztására, hogy a gyakrabban használt szolgáltatások közül\n"
-"melyeket kívánja telepíteni a gépre.\n"
-"\n"
-"  - \"Grafikus környezet\": itt választható ki a kívánt grafikus környezet.\n"
-"Ha grafikus munkaállomást szeretne, akkor legalább egyet ki kell\n"
-"választani.\n"
-"\n"
-"Ha az egérkurzort egy csoport neve fölé viszi, akkor megjelenik egy rövid\n"
-"magyarázat az adott csoportról. Ha telepítéskor az összes csoport\n"
-"kijelölését megszünteti (frissítésre ez nem vonatkozik), akkor a telepítõ\n"
-"választási lehetõséget fog felkínálni a minimális telepítésre vonatkozóan.\n"
-"A következõ lehetõségek választhatók:\n"
-"\n"
-"  - \"X-szel együtt\": grafikus rendszer a lehetõ legkevesebb csomag\n"
-"telepítésével.\n"
-"\n"
-"  - \"Alapvetõ dokumentációval\": az alaprendszer az alapvetõ programokkal\n"
-"és azok dokumentációjával. Megfelel például kiszolgáló telepítéséhez.\n"
-"\n"
-"  - \"Valóban minimális telepítés\": a lehetõ legkisebb telepítés;\n"
-"parancssorból használható Linux rendszer. Körülbelül 65 megabájt méretû\n"
-"telepítés.\n"
-"\n"
-"Bejelölheti a \"Csomagok egyedi kiválasztása\" opciót; ez akkor hasznos,\n"
-"ha Ön ismeri a felkínált csomagokat, illetve ha teljes mértékben\n"
-"ellenõrizni kívánja, mi lesz a gépre feltelepítve.\n"
-"\n"
-"Ha a telepítést \"Frissítés\" üzemmódban indította el, akkor megszüntetheti\n"
-"akár az összes csoport kijelölését is, hogy elkerülje új programok\n"
-"telepítését. Ez különösen akkor lehet hasznos, ha egy meglevõ rendszert\n"
-"kíván helyreállítani vagy frissíteni."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Végül, attól függõen, hogy kívánt-e egyedi csomagkiválasztást használni,\n"
-"megjelenik egy fa, amely az összes telepíthetõ programcsomagot tartalmazza\n"
-"csoportokba és alcsoportokba kategorizálva. A fa böngészése közben\n"
-"nem csak csomagokat jelölhet ki, hanem egész csoportokat illetve\n"
-"alcsoportokat is.\n"
-"\n"
-"Amikor kiválaszt egy csomagot a fában, a jobb oldalon megjelenik egy leírás\n"
-"az adott csomagról. Ha végzett a kijelölésekkel, kattintson a \"Telepítés\"\n"
-"gombra; ennek hatására megkezdõdik a programok telepítése. A gép\n"
-"sebességétõl illetve a telepítendõ csomagok számától függõen a folyamat\n"
-"jelentõs idõt vehet igénybe. A telepítõ megjelenít egy becslést arra\n"
-"vonatkozóan, hogy mennyi idõ van hátra a telepítés befejeztéig.\n"
-"\n"
-"Ha kiszolgálócsomagok is ki lettek választva - akár közvetlenül, akár\n"
-"bizonyos csoportok tagjaként -, a telepítõ megerõsítést kér Öntõl arra\n"
-"vonatkozóan, hogy valóban telepíteni kívánja-e azon kiszolgálószoftvereket.\n"
-"A Mandrake Linux rendszerben alapértelmezésben az összes feltelepített\n"
-"kiszolgálóprogram elindításra kerül a rendszer indulásakor. Még ha azok\n"
-"biztonságosak is illetve nem rendelkeznek ismert problémákkal, akkor is\n"
-"elõfordulhat, hogy utóbb biztonsági problémák merülnek fel velük\n"
-"kapcsolatban. Ha nem tudja, hogy egy bizonyos - telepítésre kijelölt -\n"
-"szolgáltatásnak mi a feladata illetve miért kerül telepítésre, akkor\n"
-"kattintson a \"Nem\" gombra. Ha az \"Igen\" gombra kattint, akkor a\n"
-"felsorolt szolgáltatások telepítésre kerülnek, és alapértelmezés szerint\n"
-"automatikusan elindításra kerülnek majd.\n"
-"\n"
-"\"Az automatikusan kijelölt csomagok mutatása\" opció bejelölésének\n"
-"hatására a telepítõ jelezni fogja, ha automatikusan jelöl ki csomagokat\n"
-"telepítésre. Ilyesmi azért fordul elõ, mert bizonyos függõségek miatt\n"
-"szükség lehet további csomagok telepítésére is.\n"
-"\n"
-"A lista alatt levõ, floppylemezt ábrázoló ikon lehetõvé teszi egy korábbi\n"
-"telepítés során elmentett csomaglista betöltését. Ezen ikonra kattintva a\n"
-"telepítõ megkéri Önt, hogy tegyen be egy floppyt, amely egy korábbi\n"
-"telepítés végén készült. Ha szeretné megtudni, hogyan lehet ilyen floppyt\n"
-"készíteni, tekintse meg a telepítés utolsó lépésében szereplõ tippet."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Itt beállíthatja az internetkapcsolatot illetve a hálózati kapcsolatot.\n"
-"Ha szeretné a gépét az internetre vagy egy helyi hálózatra csatlakoztatni,\n"
-"akkor kattintson az \"OK\" gombra. A telepítõ felderíti a hálózati\n"
-"eszközöket és a modemeket. Ha a felderítés nem jár sikerrel, akkor a\n"
-"következõ alkalommal kapcsolja ki az \"Automatikus detektálás\" opciót. Ha\n"
-"nem kívánja beállítani a hálózatot, vagy késõbb kívánja azt beállítani,\n"
-"akkor kattintson a \"Mégsem\" gombra.\n"
-"\n"
-"A lehetséges kapcsolatok: hagyományos modem, ISDN-modem, ADSL-kapcsolat,\n"
-"kábelmodem, egyszerû helyi hálózati (LAN) kapcsolat (Ethernet).\n"
-"\n"
-"A lehetséges beállítások itt nem kerülnek részletezésre. A szükséges\n"
-"paramétereket az internet-szolgáltatótól illetve a\n"
-"rendszeradminisztrátortól tudhatja meg.\n"
-"\n"
-"A beállításokkal kapcsolatban a felhasználói kézikönyv\n"
-"internetkapcsolatokkal foglalkozó fejezetébõl szerezhet további\n"
-"információkat. A kapcsolat beállítását nem szükséges a telepítés közben\n"
-"elvégezni; a kézikönyv leírja, hogyan lehet azt megtenni egy feltelepített\n"
-"rendszeren.\n"
-"\n"
-"Ha a hálózat beállítását a telepítés után kívánja elvégezni, illetve ha\n"
-"befejezte a hálózati kapcsolat beállítását, akkor kattintson a \"Mégsem\"\n"
-"gombra."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Most lehet kijelölni az automatikusan elindítandó szolgáltatásokat.\n"
-"\n"
-"Itt látható a jelenleg telepített összes szolgáltatás listája.\n"
-"Vizsgálja meg a listát alaposan, és törölje a kijelölést azok mellõl,\n"
-"amelyek automatikus elindítására nincs szükség.\n"
-"\n"
-"Egy szolgáltatás kiválasztásakor mindig megjelenik a hozzá tartozó rövid\n"
-"leírás. Ha nem tudja biztosan, hogy a szolgáltatásra szükség van-e vagy\n"
-"sem, akkor ne változtassa meg az alapértelmezett indítási módot.\n"
-"\n"
-"Gondosan járjon el, ha a gépet kiszolgálónak fogja használni,\n"
-"ne indítson el egy olyan szolgáltatást sem automatikusan, amelyre nincs\n"
-"szükség. A feleslegesen elindított szolgáltatások biztonsági kockázatot\n"
-"jelentenek. Csak a tényleges feladatot ellátó szolgáltatásokat engedélyezze."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"A Linux az idõt a GMT (Greenwich Mean Time) alapján kezeli - a\n"
-"kiválasztott idõzónának megfelelõ helyi idõre konvertálja azt. Az\n"
-"idõzónához való igazítás kikapcsolható \"A gép órája GMT-idõt mutat\"\n"
-"opció kikapcsolásával - ekkor a rendszeróra szerinti idõ azonos lesz a\n"
-"gép órája szerintivel. Ez akkor hasznos, ha van a gépen más operációs\n"
-"rendszer is (például Windows).\n"
-"\n"
-"Az \"Automatikus idõszinkronizáció\" opció automatikusan beállítja az órát\n"
-"egy internetes géphez kapcsolódva. Az erre alkalmas gépek megjelenõ\n"
-"listájából válasszon ki egy Önhöz közel levõt. Természetesen ehhez szükség\n"
-"van mûködõ internetkapcsolatra. Ez a funkció feltelepít az Ön gépére\n"
-"egy idõkiszolgálót, amelyet a helyi hálózat többi gépe is használhat."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"Az X (teljes néven: X Window System) a Linux grafikus felületét nyújtó\n"
-"rendszer. A Mandrake Linuxban levõ grafikus környezetek (KDE, GNOME,\n"
-"AfterStep, WindowMaker, ...) ezen grafikus rendszert használják.\n"
-"A telepítõ most megkísérli automatikusan beállítani az X rendszert.\n"
-"\n"
-"Bizonyos - ritkán elõforduló - esetekben az automatikus beállítás nem\n"
-"hajtható végre; ez általában a nagyon régi illetve a nagyon új\n"
-"hardverelemek esetén van így. Ha sikeres a mûvelet, akkor az X rendszer\n"
-"automatikusan elindításra kerül a legmegfelelõbb grafikus felbontással (ez\n"
-"utóbbi a monitor méretétõl is függ). Egy ablaknak kell megjelennie,\n"
-"amelyben a telepítõ megkérdi Önt, hogy az ablak látható-e.\n"
-"\n"
-"Amennyiben \"Szakértõ\" módban végzi a telepítést, a telepítõ elindítja\n"
-"az X beállítási varázslót. A varázslóval kapcsolatban további információk\n"
-"a kézikönyvben találhatók.\n"
-"\n"
-"Ha látható az ablakban megjelenõ üzenet, akkor nyomja le az \"Igen\"\n"
-"gombot; a telepítõ ekkor a következõ lépésre ugrik. Ha viszont az üzenet\n"
-"nem látható, az azt jelenti, hogy a beállítás nem megfelelõ. A beállítás\n"
-"tesztelése 10 másodperc elteltével automatikusan véget ér, a telepítõ\n"
-"ezután visszaállítja a képernyõt a korábbi üzemmódba."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Amikor elõször próbálja ki az X beállításait, elképzelhetõ, hogy nem lesz\n"
-"megelégedve azokkal (például a képernyõ túl kicsi, vagy oldalirányban el\n"
-"van tolódva). Ezért a DrakX még abban az esetben is megkérdi Öntõl, hogy\n"
-"megfelelnek-e a beállítások, ha az X rendben elindul. A program megjelenít\n"
-"egy listát az általa felismert érvényes üzemmódokról. A listából\n"
-"kiválasztható egy megfelelõ grafikus mód.\n"
-"\n"
-"Végsõ esetben - ha az X rendszert nem sikerül mûködésbe hozni - válassza\n"
-"\"A grafikus kártya módosítása\" funkciót, majd az \"Unlisted\" (a\n"
-"listában nem szereplõ kártya) bejegyzést, amikor pedig a program megkérdi,\n"
-"hogy Ön melyik kiszolgálót szeretné, akkor válassza az \"FBDev\"-et.\n"
-"Ez egy biztonsági opció, amely bármely modern grafikus kártyával mûködik.\n"
-"Ezután válassza a \"Még egy próba\" funkciót a biztonság kedvéért."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Végül el kell dönteni, hogy a rendszer grafikus módban induljon-e vagy sem.\n"
-"A program akkor is felteszi ezt a kérdést, ha Ön kihagyta a beállítások\n"
-"kipróbálását. Ha a gép kiszolgálóként fog üzemelni, vagy nem sikerült\n"
-"beállítani a grafikus módot, akkor a \"Nem\"-et érdemes választani."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"A Mandrake Linux CD-nek van egy beépített helyreállítási üzemmódja. Ezen\n"
-"üzemmód a következõképpen érhetõ el: indítsa a rendszert a CD-rõl, majd\n"
-"nyomja le az \"F1\" billentyût, és gépelje be a megjelenõ parancssorban\n"
-"azt, hogy \"rescue\". Ha viszont a gép nem képes CD-rõl való\n"
-"rendszerindításra, akkor vissza kell térnie ezen lépéshez segítségért - ez\n"
-"legalább két esetben szükséges lehet:\n"
-"\n"
-"  - A rendszerbetöltõ telepítésekor (hacsak Ön nem használ más\n"
-"rendszerindító programot) a telepítõ módosítja a fõ lemez\n"
-"betöltõszektorát (boot sector; más néven: MBR) annak érdekében, hogy\n"
-"többféle operációs rendszert is be lehessen tölteni (például: Linux\n"
-"és Windows - ha van a gépen Windows). Ha Ön újratelepíti a Windowst, akkor\n"
-"a Microsoft-féle telepítõ át fogja írni a betöltõszektort, és emiatt Ön nem\n"
-"lesz képes Linuxt indítani.\n"
-"\n"
-"  - Ha probléma merül fel, és Ön nem tudja elindítani a Linux rendszert\n"
-"a merevlemezrõl, akkor ezen floppy fogja jelenteni az egyetlen lehetõséget\n"
-"arra, hogy elindítsa a rendszert. A floppy programokat tartalmaz a rendszer\n"
-"helyreállításához (arra az esetre, ha például áramkimaradás történt).\n"
-"\n"
-"Ha kéri ennek a lépésnek a végrehajtását, akkor a telepítõ megkéri Önt\n"
-"arra, hogy tegyen be egy floppyt a meghajtóba. Ügyeljen arra, hogy a\n"
-"floppylemezen ne legyen megõrzésre szánt adat. A lemezt nem szükséges\n"
-"elõzetesen formázni, mivel a telepítõ felülírja a teljes lemez tartalmát."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Most kell megadni, hogy a Mandrake Linux telepítése a merevlemez melyik\n"
-"részére történjen. Ha a lemez még teljesen üres, vagy a korábban telepített\n"
-"operációs rendszer(ek) miatt nincs elég szabad hely, akkor újra kell\n"
-"partícionálni a lemezt. A partícionálás a lemezterület logikai\n"
-"újrafelosztását jelenti - erre a Mandrake Linux telepítéséhez szükséges\n"
-"hely létrehozása érdekében van szükség.\n"
-"\n"
-"A partícionálás veszélyes mûvelet. Hiba esetén adatvesztéssel járhat,\n"
-"ráadásul általában nincs lehetõség visszatérni egy korábbi állapothoz.\n"
-"Emiatt kezdõ felhasználóknak sok nehézséget okozhat. Ez a varázsló\n"
-"megkönnyíti a mûvelet végrehajtását, de mielõtt elindítaná, érdemes\n"
-"alaposan átolvasni a kézikönyv idevágó részét.\n"
-"\n"
-"Ha a telepítést szakértõi módban futtatja, el fog indulni a DiskDrake nevû\n"
-"program, amely a Mandrake Linux rendszer partícionálóeszköze. Ezen program\n"
-"lehetõvé teszi a partíciók módosítását. További információkat a "
-"felhasználói\n"
-"kézikönyv DiskDrake-rõl szóló fejezetében olvashat. Az ott ismertetett\n"
-"varázslók a telepítõbõl is elindíthatók, ehhez a \"Varázsló\" gombot kell\n"
-"lenyomni.\n"
-"\n"
-"Ha a partíciók már definiálva vannak - akár egy korábbi telepítés által,\n"
-"akár egy másféle partícionálóeszköz által -, akkor egyszerûen válassza ki\n"
-"azokat a Linux rendszer telepítése számára.\n"
-"\n"
-"Ha a szükséges partíciók még nem állnak rendelkezésre, létre kell hozni\n"
-"azokat a varázslóval. A lemezek tartalmától függõen többféle módon lehet\n"
-"eljárni:\n"
-"\n"
-"  - \"A szabad terület felhasználása\": ez a lehetõség az üres meghajtók\n"
-"automatikus partícionálását jelenti. További kérdést nem tesz fel a\n"
-"telepítõ.\n"
-"\n"
-"  - \"Már létezõ partíció használata\": a varázsló talált egy vagy több\n"
-"linuxos partíciót a lemezen. Ha ezeket szeretné használni a\n"
-"telepítéshez, válassza ezt a lehetõséget.\n"
-"\n"
-"  - \"A Windows partíción található szabad hely felhasználása\": ha a\n"
-"Windows úgy van feltelepítve a lemezre, hogy elfoglalja az összes\n"
-"elérhetõ területet, akkor annak egy részét fel kell szabadítani a Linux\n"
-"számára. Ez történhet a Windows-partíció törlésével (lásd \"A teljes\n"
-"lemez törlése\" és a \"Szakértõi mód\" lehetõségeket) vagy\n"
-"átméretezésével. Az átméretezés végrehajtható a lemezen levõ adatok\n"
-"elvesztése nélkül - feltéve, hogy azt megelõzõen töredezettségmentesítve\n"
-"lett a Windows-partíció. Javasolt továbbá az adatok mentése is.\n"
-"Ezen módszer a javasolt abban az esetben, ha a Mandrake Linuxt és a\n"
-"Microsoft Windowst ugyanazon a gépen szeretné használni.\n"
-"\n"
-"Ha ezt a lehetõséget választja, ne feledkezzen meg arról, hogy ennek\n"
-"hatására a Microsoft Windows partíció mérete a mostaninál kisebb lesz,\n"
-"tehát a Windows használatakor kevesebb hely lesz az adatok tárolására\n"
-"és új szoftverek telepítésére.\n"
-"\n"
-"  - \"A teljes lemez törlése\": ha minden adatot és minden partíciót\n"
-"törölni szeretne a lemezrõl, és a telepítéshez az így felszabaduló\n"
-"helyet szeretné használni, akkor válassza ezt a lehetõséget. Legyen\n"
-"nagyon óvatos ezzel a lehetõséggel, mert a lemezen levõ adatok\n"
-"véglegesen elvesznek a megerõsítés után.\n"
-"\n"
-"Ha ezt a lehetõséget választja, a lemezen levõ összes adat elvész.\n"
-"\n"
-"  - \"A Windows(TM) eltávolítása\": ez a funkció egyszerûen letöröl mindent\n"
-"a lemezrõl, és újrapartícionálja azt. A lemezen levõ összes adat elvész.\n"
-"\n"
-"Ha ezt a lehetõséget választja, a lemezen levõ összes adat elvész.\n"
-"\n"
-"  - \"Szakértõi mód\": ha közvetlenül (varázsló nélkül) szeretné elvégezni\n"
-"a partícionálást, akkor válassza ezt a lehetõséget. Legyen óvatos - sok\n"
-"minden elvégezhetõ ebben az üzemmódban, de a használata veszélyes. Könnyen\n"
-"elveszítheti a lemezen levõ összes adatot ennek a használatával, ezért\n"
-"csak indokolt esetben válassza ezt a funkciót."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"A telepítés befejezõdött; a Linux rendszer készen áll a használatra.\n"
-"A rendszer újraindításához kattintson az \"OK\" gombra. Amikor a gép\n"
-"újraindul, elindíthatja a Linuxt vagy más operációs rendszert (ha több\n"
-"operációs rendszer van a gépen).\n"
-"\n"
-"A \"Speciális\" gomb (csak szakértõi módban) lenyomására két újabb gomb\n"
-"jelenik meg:\n"
-"\n"
-"  - \"Automatikus telepítõfloppy készítése\": olyan telepítõfloppy\n"
-"készítése, amelynek használatával emberi közremûködés nélkül végezhetõ\n"
-"a rendszer telepítése. Az így végzett telepítések a jelenlegi telepítés\n"
-"beállításait használják.\n"
-"\n"
-"Két lehetõség közül lehet választani a gomb lenyomása után:\n"
-"\n"
-"      - \"Újrajátszás\". Ez részben automatizált telepítést jelent;\n"
-"a partícionálási lépés (csak az az egy) interaktív marad.\n"
-"\n"
-"      - \"Automatikus\". Teljesen automatizált telepítés; a merevlemez\n"
-"tartalma felülíródik, az összes korábbi adat elvész.\n"
-"\n"
-"Ez a lehetõség jól használható akkor, amikor nagyobb számú azonos gépre\n"
-"kell a rendszert feltelepíteni. Az automatikus telepítéssel\n"
-"kapcsolatban a Mandrake honlapján találhatók további információk.\n"
-"\n"
-"  - \"Csomagösszeállítás mentése\"(*): elmenti a korábban tett\n"
-"csomagkijelölést (a kijelölt csomagok listáját). Ha egy újabb telepítés\n"
-"alkalmával fel kívánja használni az elmentett listát, akkor helyezze be\n"
-"az azt tartalmazó floppyt a telepítés megkezdésekor, majd nyomjon\n"
-"\"F1\"-et, ezután pedig adja ki a következõ parancsot:\n"
-"linux defcfg=\"floppy\"\n"
-"\n"
-"\n"
-"(*) Ehhez szükség lesz egy FAT fájlrendszerre formázott floppyra.\n"
-"A formázás Linux alatt a következõ paranccsal végezhetõ el:\n"
-"\"mformat a:\""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Az újonnan létrehozott partíciók csak formázás után lesznek használhatók\n"
-"(a \"formázás\" lényegében egy fájlrendszer létrehozását jelenti).\n"
-"\n"
-"Most újraformázhat bizonyos, már létezõ partíciókat (ha azok tartalmát\n"
-"teljesen le kívánja törölni). Ha ezt kívánja tenni, jelölje ki azon\n"
-"partíciókat is.\n"
-"\n"
-"Nem szükséges újraformázni az összes, korábban létrehozott partíciót.\n"
-"Az operációs rendszernek szánt partíció(ka)t mindenképpen le kell formázni\n"
-"(például a \"/\", \"/usr\" és \"/var\" partíciókat), de a felhasználói\n"
-"és egyéb adatokat tartalmazó partíciókat nem szükséges újraformázni (ilyen\n"
-"például a \"/home\").\n"
-"\n"
-"Gondosan ellenõrizze, mely partíciókat jelöli ki, mert a formázás során az\n"
-"adott partíciókon levõ adatok törlõdnek, és késõbb nem nyerhetõk vissza.\n"
-"\n"
-"Kattintson az \"OK\" gombra a formázás megkezdéséhez.\n"
-"\n"
-"Kattintson a \"Mégsem\" gombra, ha más partícióra szeretné telepíteni a\n"
-"Mandrake Linux operációs rendszert.\n"
-"\n"
-"Kattintson a \"Speciális\" gombra, ha bizonyos partíciókat ellenõriztetni\n"
-"kíván (hibás blokkok keresése)."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"A Mandrake Linux operációs rendszer telepítése folyik.\n"
-"A telepítendõ szoftverek mennyiségétõl és a gép sebességétõl\n"
-"függõen a telepítés igen sokáig eltarthat.\n"
-"\n"
-"Egy kis türelmet kérek..."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Lehetséges, hogy amikor Ön a Mandrake Linux rendszert telepíti, már\n"
-"frissítésre kerültek bizonyos csomagok a rendszer kiadása óta.\n"
-"Elképzelhetõ, hogy bizonyos hibák ki lettek javítva, illetve\n"
-"hogy meg lettek oldva bizonyos felmerült biztonsági problémák. Ezeket\n"
-"a frissítéseket Ön letöltheti az interneten keresztül.\n"
-"Nyomja le az \"Igen\" gombot, ha van mûködõ internetkapcsolata. Ha viszont\n"
-"inkább késõbb kívánja telepíteni a frissítéseket, akkor a \"Nem\" gombot\n"
-"nyomja le.\n"
-"\n"
-"Ha az \"Igen\" gombot nyomja le, akkor megjelenik egy lista azon helyekrõl,\n"
-"amelyekrõl a frissítések letölthetõk. Válasszon közülük egy Önhöz közel "
-"levõt.\n"
-"Ezt követõen egy csomagválasztási fa jelenik meg. Ha telepíteni kívánja a\n"
-"kijelölt csomagokat, akkor nyomja le a \"Telepítés\" gombot. Ha nem kíván\n"
-"csomagokat telepíteni, akkor a \"Mégsem\" gombot nyomja le."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Mielõtt továbblépne, olvassa át alaposan a licencegyezményt, mely az\n"
-"egész Mandrake Linux disztribúcióra érvényes, és ha nem fogadja el\n"
-"valamelyik feltételt, kattintson a \"Nem fogadom el\" gombra. Ekkor a\n"
-"telepítés azonnal félbeszakad. A telepítés folytatásához kattintson\n"
-"az \"Elfogadom\" gombra."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Most ki kell választani egy biztonsági szintet a gép számára. Alapszabály,\n"
-"hogy minél inkább elérhetõ a gép, illetve minél kritikusabb adatok vannak\n"
-"azon tárolva, annál magasabbra érdemes venni a biztonsági szintet. Magasabb\n"
-"szint esetén viszont általában nehézkesebb a gép használata. A szintek\n"
-"jelentésével kapcsolatban a kézikönyv \"msec\" fejezetében találhatók\n"
-"további információk.\n"
-"\n"
-"Ha nem biztos benne, hogy mit volna érdemes választani, válassza az\n"
-"alapértelmezés szerinti lehetõséget."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Most kell kiválasztani a Mandrake Linux rendszer telepítéséhez használni\n"
-"kívánt partíciókat. Ha a kívánt partíciók már létre lettek hozva (egy\n"
-"korábbi Linux-telepítés vagy valamilyen partícionálási segédprogram\n"
-"által), akkor felhasználhatók a már létezõ partíciók. Ha viszont még nem\n"
-"léteznek, akkor elõször definiálni kell a partíciókat.\n"
-"\n"
-"Partíció létrehozásánál elõször ki kell választani egy merevlemezt.\n"
-"Ehhez kattintson a megfelelõ azonosítóra: \"hda\" az elsõ IDE-csatolós\n"
-"lemez, \"hdb\" a második; \"sda\" az elsõ SCSI-csatolós lemez, és így\n"
-"tovább.\n"
-"\n"
-"A kijelölt merevlemez partícionálásánál az alábbi lehetõségek közül lehet\n"
-"választani:\n"
-"\n"
-"  - \"Teljes törlés\": ennek hatására a kijelölt merevlemezen található\n"
-"összes partíció törlésre kerül.\n"
-"\n"
-"  - \"Automatikus helyfoglalás\": ez lehetõvé teszi Ext2 és lapozási\n"
-"partíciók automatikus létrehozását a rendelkezésre álló üres területen.\n"
-"\n"
-"  - \"Egyéb\": hozzáférést biztosít további lehetõségekhez:\n"
-"\n"
-"      - \"A partíciós tábla mentése\": a partíciós tábla mentése floppyra.\n"
-"A floppy használatával késõbb - szükség esetén - helyre lehet állítani\n"
-"(vissza lehet tölteni) a partíciós táblát. Erõsen ajánljuk, hogy használja\n"
-"ezt a lehetõséget.\n"
-"\n"
-"      - \"A partíciós tábla visszatöltése\": egy korábban elmentett\n"
-"partíciós tábla visszatöltése floppyról.\n"
-"\n"
-"      - \"A partíciós tábla helyreállítása\": ha a partíciós tábla\n"
-"megsérült, akkor ezzel lehet megpróbálni annak kijavítását. Legyen nagyon\n"
-"óvatos, mert a javítás nem mindig sikerül.\n"
-"\n"
-"      - \"A partíciós tábla újratöltése\": ennek hatására az összes\n"
-"módosítás elvész; a program ismét betölti a kiindulási partíciós táblát.\n"
-"\n"
-"      - \"Cserélhetõ lemez automatikus csatlakoztatása\": ha nincs\n"
-"bejelölve ez az opció, akkor a felhasználóknak kézzel kell végezniük a\n"
-"cserélhetõ adathordozók (például CD és floppy) csatlakoztatását illetve\n"
-"leválasztását.\n"
-"\n"
-"  - \"Varázsló\": akkor válassza ezt a lehetõséget, ha a partícionálást\n"
-"varázsló segítségével szeretné végrehajtani. Ha nem ismeri a\n"
-"partícionálás technikai részleteit, akkor érdemes ezt választania.\n"
-"\n"
-"  - \"Visszavonás\": ezzel lehet a módosításokat visszavonni.\n"
-"\n"
-"  - \"Átváltás normál módba\" illetve \"Átváltás szakértõi módba\":\n"
-"szakértõi módba való kapcsolás esetén több funkció válik elérhetõvé\n"
-"(partíciótípus, opciók, formázás) és több információt kap a felhasználó.\n"
-"\n"
-"  - \"Kész\": a partícionálás befejezése után ezzel lehet a módosításokat\n"
-"elmenteni a lemezre.\n"
-"\n"
-"Az összes funkció elérhetõ a billentyûzetrõl is. A partíciók között a Tab\n"
-"billentyûvel és a fel/le nyilakkal lehet mozogni.\n"
-"\n"
-"Ha egy partíció ki van jelölve, használni lehet a következõket:\n"
-"\n"
-"  - Ctrl+C: új partíció létrehozása (ha üres partíció van kijelölve)\n"
-"\n"
-"  - Ctrl+D: partíció törlése\n"
-"\n"
-"  - Ctrl+M: csatlakoztatási (mount) pont megadása\n"
-"\n"
-"Ha információt szeretne a használható fájlrendszertípusokról, olvassa el\n"
-"a kézikönyv Ext2fs fájlrendszerrel foglalkozó fejezetét.\n"
-"\n"
-"Ha a telepítés egy PowerPC gépre történik, akkor érdemes létrehozni egy\n"
-"kisméretû HFS rendszerindítási partíciót (legalább 1 MB) a \"Yaboot\"\n"
-"rendszerbetöltõ program számára. Ha nagyobbra veszi a partíciót (például\n"
-"50 MB méretûre), akkor eltárolható lesz rajta például egy tartalék kernel\n"
-"illetve RAM-diszk képfájlok (image-ek) esetleges rendszerhibák esetére."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Egynél több Microsoft-partíciót találtam a lemezen.\n"
-"Válassza ki azt, amelyiket át szeretné méretezni, hogy a\n"
-"Mandrake Linux feltelepíthetõ legyen.\n"
-"\n"
-"A partíciólista a következõ mezõket tartalmazza: \"linuxos név\",\n"
-"\"windowsos név\", \"kapacitás\".\n"
-"\n"
-"A \"linuxos név\" formátuma a következõ: \"a merevlemez típusa\",\n"
-"\"a lemez azonosítója\", \"a partíció azonosítója\" (például \"hda1\").\n"
-"\n"
-"Ha a lemez IDE-csatolós, akkor \"a merevlemez típusa\" \"hd\",\n"
-"ha pedig SCSI-csatolós, akkor \"sd\".\n"
-"\n"
-"\"A lemez azonosítója\" mindig egy betû a \"hd\" illetve az \"sd\" után.\n"
-"IDE-csatolós meghajtók esetén:\n"
-"\n"
-"  - \"a\" jelentése: \"elsõ (master) meghajtó az elsõ IDE-vezérlõn\"\n"
-"\n"
-"  - \"b\" jelentése: \"második (slave) meghajtó az elsõ IDE-vezérlõn\"\n"
-"\n"
-"  - \"c\" jelentése: \"elsõ meghajtó a második IDE-vezérlõn\"\n"
-"\n"
-"  - \"d\" jelentése: \"második meghajtó a második IDE-vezérlõn\"\n"
-"\n"
-"SCSI-csatolós meghajtóknál az \"a\" jelentése: \"a legalacsonyabb\n"
-"SCSI-azonosító\", \"b\" jelentése: \"a második legalacsonyabb\n"
-"SCSI-azonosító\", és így tovább.\n"
-"\n"
-"A \"windowsos név\" a meghajtó Windows alatt használt azonosítója\n"
-"(az elsõ lemez vagy partíció neve \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Egy kis türelmet kérek, a mûvelet több percet is igénybe vehet."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Most közölnie kell a telepítõvel, hogy alapértelmezés szerinti\n"
-"(\"Ajánlott\") telepítést szeretne-e végezni, vagy pedig nagyobb befolyást\n"
-"szeretne a telepítési folyamat felett (\"Szakértõ\"). Választhat továbbá\n"
-"a következõ lehetõségek közül: új telepítés illetve egy meglevõ Mandrake\n"
-"Linux rendszer frissítése.\n"
-"\n"
-"  - \"Telepítés\": a korábbi rendszer felülírásra kerül. Attól függõen,\n"
-"hogy mi található a gépen, bizonyos (linuxos vagy egyéb) partíciók\n"
-"változatlan tartalommal megõrizhetõk.\n"
-"\n"
-"  - \"Frissítés\": lehetõvé teszi egy korábbi Mandrake Linux telepítés\n"
-"csomagjainak frissítését. A merevlemez partíciói változatlanok maradnak,\n"
-"a felhasználók beállításai sem módosulnak. A normál telepítésben jelen\n"
-"levõ többi beállítási lépés itt is elérhetõ.\n"
-"\n"
-"  - \"Csak a csomagok frissítése\": lehetõvé teszi egy létezõ Mandrake\n"
-"Linux rendszer frissítését a rendszerbeállítások módosítása nélkül.\n"
-"Lehetõség van új csomagok telepítésére is.\n"
-"\n"
-"Frissítés használata Mandrake Linux 8.1 vagy újabb kiadás esetén javasolt.\n"
-"\n"
-"A Linuxszal kapcsolatos ismereteitõl függõen válassza ki a következõ\n"
-"lehetõségek közül a Mandrake Linux operációs rendszer telepítésének illetve\n"
-"frissítésének módját:\n"
-"\n"
-"  - \"Ajánlott\": válassza ezt, ha még nem telepített Linux operációs\n"
-"rendszert. A telepítés nagyon egyszerû lesz; csak néhány kérdést fog\n"
-"Önnek feltenni a telepítõ.\n"
-"\n"
-"  - \"Szakértõ\": ha több ismerettel rendelkezik a Linux rendszerrel\n"
-"kapcsolatban, akkor érdemes lehet ezt a telepítési módot választania.\n"
-"A szakértõi mód lehetõvé teszi, hogy Ön testreszabott telepítést\n"
-"végezzen. Bizonyos kérdések megválaszolása nehéz lehet, ha Ön nem\n"
-"rendelkezik alaposabb Linux-ismeretekkel; ezért fontolja meg, hogy\n"
-"ezt a lehetõséget választja-e."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normál esetben a DrakX kiválasztja a megfelelõ billentyûzetet (a választott\n"
-"nyelvtõl függõen), és Ön nem is fogja látni ezt a lépést. Viszont\n"
-"elképzelhetõ, hogy Önnek nem a nyelvének megfelelõ billentyûzete van;\n"
-"például ha Ön egy angolul beszélõ magyar ember, akkor lehet, hogy magyar\n"
-"billentyûzetkiosztást szeretne. Hasonló helyzet adódhat, ha az Ön nyelve\n"
-"magyar, de Ön Quebecben tartózkodik. Mindkét esetben vissza kell lépnie\n"
-"erre a telepítési lépésre és ki kell választania egy megfelelõ\n"
-"billentyûzetet a listából.\n"
-"\n"
-"Hogy megjelenjen a támogatott billentyûzetek teljes listája, kattintson\n"
-"az \"Egyéb\" nyomógombra."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Válassza ki a telepítéshez és a telepített rendszerhez használandó nyelvet.\n"
-"\n"
-"A \"Speciális\" nyomógombra kattintva kiválaszthatók további telepítendõ\n"
-"nyelvek. További nyelvek választása esetén telepítésre kerülnek az adott\n"
-"nyelvekhez tartozó fájlok is - a rendszerdokumentáció és az alkalmazások\n"
-"szövegei. Ha például a gépet spanyol felhasználók is használni fogják,\n"
-"akkor a fõ nyelvnek (például magyar) a fában történõ kiválasztását követõen\n"
-"a Speciális részben kattintson a \"Spanish|Spain\" (spanyol|Spanyolország)\n"
-"bejegyzéshez tartozó négyzetre.\n"
-"\n"
-"Több nyelv is telepíthetõ. Ha kijelölte az összes kívánt nyelvet,\n"
-"kattintson az \"OK\" gombra a folytatáshoz."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"A DrakX általában felismeri, hogy hány gomb van az egéren. Ha ez nem így\n"
-"történik, akkor azt feltételezi, hogy Ön kétgombos egérrel rendelkezik,\n"
-"és ez esetben beállítja a harmadik egérgomb emulálását. A program "
-"felismeri,\n"
-"hogy milyen fajtájú az egér: PS/2, soros vagy USB.\n"
-"\n"
-"Ha Ön másféle egértípust szeretne megadni, válassza ki a megfelelõ típust\n"
-"a listából.\n"
-"\n"
-"Ha az alapértelmezettõl eltérõ egeret választ, akkor megjelenik egy\n"
-"tesztelési képernyõ. Használja az egérgombokat és a görgõt, hogy\n"
-"ellenõrizze a beállítások helyességét. Ha az egér nem mûködik helyesen,\n"
-"akkor nyomja le a Szóköz vagy az Enter (Return) billentyût, és válasszon\n"
-"egy másik fajta egeret."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Válassza ki a megfelelõ portot. Például a windowsos \"COM1\" port\n"
-"neve Linux alatt \"ttyS0\"."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Ez a legkritikusabb pont a Linux rendszer biztonságára vonatkozóan:\n"
-"meg kell adni a \"root\" nevû felhasználó jelszavát. A \"root\" azonosító\n"
-"a rendszeradminisztrátort jelöli; ez az egyetlen olyan felhasználó,\n"
-"amelynek joga van rendszerfrissítést végezni, felhasználókat létrehozni,\n"
-"módosítani a rendszerbeállításokat illetve hasonló tevékenységeket végezni.\n"
-"Röviden szólva: a \"root\" felhasználó bármit megtehet a rendszeren.\n"
-"Ez az, amiért a jelszót úgy kell megválasztani, hogy azt minél nehezebb\n"
-"legyen kitalálni. A telepítõ jelzi az Ön számára, ha a jelszót könnyen\n"
-"kitalálhatónak tartja. Nem kötelezõ megadni jelszót, de erõsen javasolt;\n"
-"ha másért nem is, a következõ miatt: ne gondolja, hogy ha Ön Linux\n"
-"rendszert indít, akkor a gépen levõ többi operációs rendszer feltétlenül\n"
-"védve van az esetlegesen elkövetett hibáktól. A \"root\" felhasználóra nem\n"
-"vonatkoznak a korlátozások; ha például óvatlanul kezeli a partíciókat,\n"
-"akkor akár le is törölheti az azokon levõ adatokat; ezért fontos, hogy\n"
-"a rendszeradminisztrátori azonosító védve legyen.\n"
-"\n"
-"A jelszónak betûkbõl és számokból kell állni, és legalább 8 karakter\n"
-"hosszúságúnak kell lenni. Soha ne írja le a rendszeradminisztrátori\n"
-"jelszót - ez veszélyt jelenthetne a rendszerre.\n"
-"\n"
-"A fentiek ellenére ne válasszon túl hosszú vagy túl bonyolult jelszót, mert\n"
-"Önnek fejben kell tartania azt.\n"
-"\n"
-"A jelszó nem jelenik meg a képernyõn, amikor Ön begépeli azt. Emiatt\n"
-"kétszer kell azt beírni - ezáltal csökken az esélye annak, hogy Ön elgépeli\n"
-"a jelszót. Ha esetleg ugyanazt a gépelési hibát követi el a jelszó elsõ\n"
-"és második megadásánál, akkor ezen - helytelenül írt - jelszóval kell majd\n"
-"bejelentkezni a rendszerbe.\n"
-"\n"
-"Szakértõi mód esetén a telepítõ megkérdi, hogy szükség van-e azonosítási\n"
-"kiszolgáló (authentication server) használatára (NIS, LDAP, ...).\n"
-"\n"
-"Ha az Ön hálózata LDAP protokollt (illetve NIS-t) használ azonosításhoz,\n"
-"akkor válassza az \"LDAP\" (illetve \"NIS\") lehetõséget azonosítási\n"
-"módszerként. Ha nem tudja, mit kellene megadni, kérdezze meg a\n"
-"rendszergazdát.\n"
-"\n"
-"Ha a számítógép nem kapcsolódik semmilyen adminisztrált hálózathoz, akkor\n"
-"válassza a \"Helyi fájlok\" lehetõséget."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"A LILO és a GRUB linuxos rendszerindító programok. Ez a fázis általában\n"
-"teljesen automatikus. A telepítõ elemzi a lemez betöltõszektorát, és\n"
-"annak megfelelõen cselekszik, hogy ott mit talál:\n"
-"\n"
-"  - Ha windowsos betöltõszektort talál, akkor azt helyettesíteni fogja egy\n"
-"GRUB/LILO betöltõszektorral. Ezért Önnek lehetõsége lesz arra is, hogy\n"
-"Linuxt indítson, és arra is, hogy egy másik operációs rendszert.\n"
-"\n"
-"  - Ha GRUB vagy LILO betöltõszektort talál, helyettesíti azt egy új\n"
-"példánnyal.\n"
-"\n"
-"Ha a telepítõ nem tud dönteni, akkor megjelenít egy párbeszédablakot\n"
-"különféle lehetõségekkel.\n"
-"\n"
-"  - \"A használni kívánt rendszerbetöltõ\": három lehetõség van:\n"
-"\n"
-"      - \"GRUB\": ha a GRUB-ot szeretné használni (szöveges menü).\n"
-"\n"
-"      - \"LILO, grafikus menüvel\": ha grafikus felületû LILO-t szeretne.\n"
-"\n"
-"      - \"LILO, szöveges menüvel\": ha szöveges felületû LILO-t szeretne.\n"
-"\n"
-"  - \"Rendszerindítási eszköz\": a legtöbb esetben nincs szükség az\n"
-"alapértelmezett érték (\"/dev/hda\") módosítására, de ha kívánja, a\n"
-"rendszerbetöltõ telepíthetõ a második merevlemezre is (\"/dev/hdb\"),\n"
-"vagy akár floppylemezre is (\"/dev/fd0\").\n"
-"\n"
-"  - \"Várakozási idõ az alapértelmezett rendszer betöltése elõtt\": a gép\n"
-"újraindításakor ennyi ideje van a felhasználónak a rendszerbetöltõ\n"
-"menüjének megjelenését követõen arra, hogy kiválassza, melyik rendszert\n"
-"kívánja elindítani (ha nem az alapértelmezettet).\n"
-"\n"
-"Legyen óvatos: ha nem telepít rendszerbetöltõt (azaz a \"Mégsem\" gombot\n"
-"nyomja le), akkor biztosítania kell egy másféle módszert a Mandrake Linux\n"
-"rendszer elindítására. Továbbá: csak akkor módosítsa az opciókat, ha biztos\n"
-"abban, hogy tisztában van a funkciójukkal.\n"
-"\n"
-"A párbeszédablak \"Speciális\" gombjára kattintva további opciók válnak\n"
-"elérhetõvé - ezek a szakértõ felhasználók számára lesznek lényegesek.\n"
-"\n"
-"Miután beállította az általános rendszerbetöltõ-paramétereket, megjelenik\n"
-"a betöltési lehetõségek listája, amely rendszerindításkor lesz elérhetõ.\n"
-"\n"
-"Ha van másik operációs rendszer a gépen, az automatikusan fel lesz véve a\n"
-"betöltési menübe. Itt módosíthatók az aktuális beállítások. Egy elem\n"
-"módosításához illetve eltávolításához jelölje ki az elemet, majd kattintson\n"
-"a \"Módosítás\" gombra. Új elemet a \"Hozzáadás\" funkcióval lehet "
-"felvenni.\n"
-"A telepítés következõ lépésére való ugrás a \"Kész\" gombbal lehetséges."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"A LILO (a \"LInux LOader\") és a GRUB rendszerindító programok: a gép\n"
-"bekapcsolása után el tudják indítani a Linuxt vagy egy másik operációs\n"
-"rendszert. Telepítéskor a felismert operációs rendszerek bejegyzései\n"
-"általában létrejönnek. Ha valamilyen ok miatt ez nem történt meg,\n"
-"akkor itt kézzel létre lehet hozni õket. Ügyeljen a megfelelõ\n"
-"paraméterezésre!\n"
-"\n"
-"Ha valamelyik operációs rendszert nem akarja elérhetõvé tenni, akkor\n"
-"törölheti annak rendszerbetöltési bejegyzéseit, de ebben az esetben\n"
-"késõbb csak indítólemezzel tudja majd azt az operációs rendszert elindítani."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Itt kell megadni, hogy hová kerüljenek a Linux\n"
-"operációs rendszer betöltéséhez szükséges adatok.\n"
-"\n"
-"Válassza \"A lemez elsõ szektora (MBR)\" opciót, ha\n"
-"nincs kizáró ok."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Itt lehet nyomtatórendszert választani a gép számára. Más operációs\n"
-"rendszerekben általában csak egy van, a Mandrake Linuxban viszont három is.\n"
-"\n"
-"  - \"pdq\": \"print, don't queue\", azaz sorba tevés nélkül történõ\n"
-"nyomtatás. Akkor válassza ezt, ha közvetlen kapcsolat van a\n"
-"nyomtatóval, és nincsen hálózati nyomtatója. Ez a módszer csak a\n"
-"legegyszerûbb hálózati szolgáltatásokat nyújtja, és hálózaton eléggé\n"
-"lassú. Válassza a \"pdq\" módszert, ha nem rendelkezik komolyabb linuxos\n"
-"ismeretekkel. Lehetõsége van arra, hogy telepítés után módosítsa ezt a\n"
-"beállítást; ehhez a PrinterDrake programot kell futtatni a Mandrake\n"
-"Vezérlõközpontban - a szakértõi beállításokat kell módosítani.\n"
-"\n"
-"  - \"CUPS\": \"Common Unix Printing System\", azaz általános Unix\n"
-"nyomtatórendszer. Helyi és távoli nyomtatókra való nyomtatáshoz remekül\n"
-"használható. Ez egy egyszerû rendszer, és képes a régi \"lpd\"\n"
-"nyomtatórendszer kiszolgálójaként vagy klienseként funkcionálni -\n"
-"vagyis kompatibilis a régebbi rendszerekkel. Nagy tudású rendszer,\n"
-"viszont az alapvetõ beállítások majdnem olyan egyszerûen elvégezhetõk\n"
-"benne, mint a \"pdq\" esetében. Ha arra használja, hogy egy \"lpd\"\n"
-"kiszolgálót emuláljon vele, akkor aktiválnia kell a \"cups-lpd\"\n"
-"szolgáltatást. Rendelkezik grafikus felülettel, amely nyomtatásra\n"
-"illetve a nyomtatóparaméterek kiválasztására használható.\n"
-"\n"
-"  - \"lprNG\": \"line printer daemon New Generation\", azaz új-generációs\n"
-"nyomtatószolgáltatás. Ez a rendszer nagyjából azt tudja, amit a többi\n"
-"hasonló, de képes Novell hálózatra kötött nyomtatókra is nyomtatni, mivel\n"
-"támogatja az IPX protokollt. Lehetõséget nyújt konzolos parancsok felé\n"
-"történõ nyomtatásra is. Ha Önnek szüksége van a Novellre, illetve ha\n"
-"parancsok felé kíván nyomtatni anélkül, hogy csõvezetéket használna,\n"
-"akkor használja az lprNG rendszert. Ettõl eltérõ esetekben a CUPS\n"
-"használata javasolt, mivel egyszerûbb és a hálózatkezelése is jobb."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"A DrakX (a telepítõ) most megkeresi a gépben levõ IDE-eszközöket. Felderíti\n"
-"a PCI SCSI-kártyákat is. A program a felismert SCSI-kártyákhoz\n"
-"automatikusan feltelepíti a megfelelõ meghajtóprogramokat.\n"
-"\n"
-"Mivel a hardverfelderítés nem mindig ismeri fel a gépben levõ eszközöket,\n"
-"ezért a telepítõ rá fog kérdezni, van-e a gépben PCI SCSI-kártya.\n"
-"Ha tudja, hogy van a gépben SCSI-kártya, kattintson az \"Igen\"-re.\n"
-"Ez esetben egy listából lehet kijelölni a kártyát. Ha nincsen SCSI\n"
-"hardver a gépben, akkor kattintson a \"Nem\" gombra. Ha nem biztos a\n"
-"válaszban, megtekintheti a megtalált hardverelemek listáját\n"
-"\"A hardverjellemzõk megjelenítése\" funkciót kiválasztva, majd\n"
-"az \"OK\"-ra kattintva. Vizsgálja meg a listát, majd kattintson az\n"
-"\"OK\" gombra a SCSI-val kapcsolatos kérdéshez való visszatéréshez.\n"
-"\n"
-"Ha kézzel kell megadnia a kártya típusát, a telepítõ megkérdezi, hogy\n"
-"szeretné-e megadni a kártya jellemzõit. Általában erre nincs szükség,\n"
-"mivel a program le tudja kérdezni a megfelelõ beállításokat. A legtöbb\n"
-"esetben ez jól mûködik.\n"
-"\n"
-"Ha a telepítõ nem tudja meghatározni a szükséges jellemzõket, akkor\n"
-"Önnek kell megadnia a meghajtóprogram paramétereit. Olvassa el a\n"
-"Felhasználói Kézikönyv 3. fejezetének \"Hardverinformációk összegyûjtése\"\n"
-"címû szakaszát, ahonnan megtudhatja, hogyan lehet információt szerezni\n"
-"a szükséges paraméterekkel kapcsolatban a hardver dokumentációjából, a\n"
-"gyártó honlapjáról (ha rendelkezik internet-hozzáféréssel) illetve a\n"
-"Microsoft Windowsból (ha használta azzal az illetõ hardvert)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"További bejegyzéseket lehet felvenni a Yaboot-ba, például más operációs\n"
-"rendszereket, további kerneleket vagy hibajavítási kernelt.\n"
-"\n"
-"Más operációs rendszereknél a bejegyzés egy címkébõl és az indítási\n"
-"partíció nevébõl áll.\n"
-"\n"
-"Linux esetén a következõ beállítások lehetnek:\n"
-"\n"
-"  - Címke: ezt a nevet a Yaboot-ba begépelve lehet majd elindítani a\n"
-"megadott operációs rendszert.\n"
-"\n"
-"  - Indítófájl: a rendszer indítási fájljának neve. Általában \"vmlinux\",\n"
-"vagy ugyanez valamilyen kiterjesztéssel.\n"
-"\n"
-"  - Gyökér: a telepített Linux rendszer gyökérpartíciója (\"/\").\n"
-"\n"
-"  - Hozzáfûzés: Apple gépeknél ezt az opciót gyakran használják a\n"
-"videokártya inicializálásához illetve a gyakran hiányzó második és\n"
-"harmadik egérgomb billentyûzetrõl történõ emulálásának beállításához.\n"
-"Néhány példa látható az alábbiakban:\n"
-"\n"
-"    video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"    video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"  - Kezdeti RAM-diszk: ez az opció használható modulok betöltésére még\n"
-"azelõtt, hogy a rendszerindítási eszköz elérhetõ lenne, vagy egy\n"
-"RAM-diszkes fájl betöltésére hibaelhárításnál.\n"
-"\n"
-"  - A RAM-diszk mérete: az alapértelmezett RAM-diszk-méret általában 4096\n"
-"bájt. Ha nagyobb méretet szeretne, használja ezt a lehetõséget.\n"
-"\n"
-"  - Írható-olvasható: általában a gyökérpartíció csatlakoztatása elõször\n"
-"csak-olvasható módban történik, hogy az aktiválás elõtt ellenõrizni\n"
-"lehessen a fájlrendszer integritását. Itt lehet felülbírálni ezt az\n"
-"eljárást.\n"
-"\n"
-"  - NoVideo: ha például egy Apple gép videokártyáját nem sikerül mûködésre\n"
-"bírni, válassza ezt az opciót a \"novideo\" módú indításhoz (natív\n"
-"framebuffer-támogatással).\n"
-"\n"
-"  - Alapértelmezés: az ezzel megjelölt bejegyzés lesz az alapértelmezett\n"
-"operációs rendszer, melynek kiválasztásához elég megnyomni az Enter\n"
-"billentyût a Yaboot-promptnál. A bejegyzés mellett megjelenik egy \"*\"\n"
-"karakter, ha Ön megjeleníti a lehetõségek listáját a Tab billentyûvel."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"A Yaboot egy rendszerindító program a \"NewWorld\" Macintosh gépekhez.\n"
-"Elindíthatók vele a gépen található Linux, MacOS és MacOS X példányok.\n"
-"Általában a telepítõprogram felismeri ezeket az operációs rendszereket és\n"
-"létrehozza a megfelelõ bejegyzéseket. De ha nem így történik, akkor kézzel,\n"
-"utólag is létrehozható a megfelelõ bejegyzés. Gondosan ellenõrizze a\n"
-"megadott paramétereket.\n"
-"\n"
-"A Yaboot legfontosabb paraméterei:\n"
-"\n"
-"  - Indítási üzenet: egyszerû szöveges üzenet, amely az indítási prompt\n"
-"elõtt jelenik meg.\n"
-"\n"
-"  - Rendszerindítási eszköz: ezzel adható meg, hogy hova kerüljön a\n"
-"rendszerindításhoz szükséges információ. Általában egy elõzõleg már\n"
-"létrehozott rendszerindítási partícióra mutat.\n"
-"\n"
-"  - Késleltetés Open Firmware-nél: a LILO-tól eltérõen a Yaboot-nál kétféle\n"
-"várakozási idõ létezik. Az elsõt másodpercben mérik, és akkor érvényes,\n"
-"amikor a CD, az OF-betöltés, a MacOS és a Linux közül választani lehet.\n"
-"\n"
-"  - Várakozási idõ rendszerindításkor: ez a késleltetési idõ a LILO-belihez\n"
-"hasonló jellegû. A Linux kiválasztása után ennyi tizedmásodpercig vár majd\n"
-"a program az alapértelmezett kernel betöltése elõtt.\n"
-"\n"
-"  - CD-rõl történhet rendszerindítás?: ennek bejelölésének hatására a \"C\"\n"
-"is választható lesz (CD-rõl való indítás) a rendszerindítási promptnál.\n"
-"\n"
-"  - OF-rõl történhet rendszerindítás?: ennek bejelölésének hatására az\n"
-"\"N\" is választható lesz (Open Firmware-rõl való indítás) a\n"
-"rendszerindítási promptnál.\n"
-"\n"
-"  - Az alapértelmezett op. rendszer?: itt lehet megadni, hogy melyik\n"
-"operációs rendszer induljon el az Open Firmware várakozási idejének\n"
-"letelte után."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Itt a gépének a különbözõ tulajdonságait láthatja. A telepített hardvertõl\n"
-"függõen a következõk jelenhetnek meg:\n"
-"\n"
-"  - \"Egér\": ellenõrizze a jelenlegi egérbeállításokat; a módosításukhoz\n"
-"kattintson a gombra.\n"
-"\n"
-"  - \"Billentyûzet\": ellenõrizze a jelenlegi billentyûzet-kiosztást; a\n"
-"módosításához kattintson a gombra.\n"
-"\n"
-"  - \"Idõzóna\": a telepítõ alapértelmezésben felkínál egy általa\n"
-"megfelelõnek tartott idõzóna-beállítást, amelyet az Ön által választott\n"
-"nyelv alapján határoz meg. Ugyanúgy, mint a billentyûzet esetén, itt\n"
-"is elképzelhetõ, hogy Ön nem abban az országban tartózkodik, amelyre\n"
-"a kiválasztott nyelv alapján következtetni lehet. Ezért szükség lehet\n"
-"arra, hogy az \"Idõzóna\" gombra kattintson - hogy az órát a megfelelõ\n"
-"idõzónához igazítsa.\n"
-"\n"
-"  - \"Nyomtató\": nyomtatóbeállítási varázsló elindítása.\n"
-"\n"
-"  - \"Hangkártya\": ha a telepítõ hangkártyát észlel a gépben, az itt fog\n"
-"megjelenni. A telepítés során nincs lehetõség ennek a módosítására.\n"
-"\n"
-"  - \"TV-tuner kártya\": ha a telepítõ TV-kártyát észlel a gépben, az itt\n"
-"fog megjelenni. A telepítés során nincs lehetõség ennek a módosítására.\n"
-"\n"
-"  - \"ISDN-kártya\": ha a telepítõ ISDN-kártyát észlel a gépben, az itt fog\n"
-"megjelenni. Ha a gombra kattint, módosíthatja a paramétereit."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Válassza ki azt a lemezt, amelyet törölni szeretne a Mandrake Linux\n"
-"telepítéséhez. Figyelem! A lemezen található adatok elvesznek, és\n"
-"késõbb nem nyerhetõk vissza!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kattintson az \"OK\" gombra, ha a lemezen található összes adatot\n"
-"és partíciót törölni szeretné. Figyelem! Az \"OK\" gomb megnyomása után\n"
-"nincs mód a törölt adatok és partíciók visszaállítására, természetesen\n"
-"akkor sem, ha egy Windows-partíció törlõdött.\n"
-"\n"
-"Kattintson a \"Mégsem\" gombra, ha nem kívánja végrehajtani a mûveletet\n"
-"(a lemezen található partíciók és adatok ez esetben nem változnak)."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nem érhetõk el a megfelelõ kernelmodulok (hiányzó fájl: %s). Ez általában "
-"azt jelenti, hogy az indítólemez nincs összhangban a telepítési médiummal. "
-"Készítsen egy újabb indítólemezt."
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Meg kell formázni ezt is: %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"A következõ kiszolgálóprogramo(ka)t választotta ki: %s\n"
-"\n"
-"\n"
-"Alapértelmezés szerint ezek lesznek aktiválva. Nem tartozik hozzájuk ismert\n"
-"biztonsági javítás, de újak megjelenhetnek. Ha ez bekövetkezik, akkor minél\n"
-"hamarabb el kell végezni a frissítést.\n"
-"\n"
-"\n"
-"Biztosan telepíteni szeretné a kiszolgálóprogramo(ka)t?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nem lehet broadcast-ot használni NIS tartomány nélkül"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-"Helyezzen egy FAT fájlrendszerre formázott floppyt a(z) \"%s\" meghajtóba"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ezen a floppyn nincs FAT fájlrendszer"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Ha fel akarja késõbb használni ezt a csomagkijelölést, akkor a telepítést "
-"\"linux defcfg=floppy\" paraméterrel indítsa el."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Hiba a(z) %s fájl olvasása közben"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"A gép bizonyos hardverelemei speciális meghajtóprogramot igényelnek.\n"
-"Információk: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Feltétlenül kell lennie gyökérpartíciónak.\n"
-"Hozzon létre egy partíciót (vagy kattintson egy meglévõre).\n"
-"Utána adja meg csatolási pontnak a \"/\"-t."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Kell legalább egy lapozási (swap) partíció"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nincs egy lapozási (swap) partíció sem.\n"
-"\n"
-"Ennek ellenére tovább szeretne lépni?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Kell egy FAT partíció a /boot/efi ponthoz csatlakoztatva"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "A szabad terület felhasználása"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nincs elég szabad terület új partíció létrehozásához"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Már létezõ partíció használata"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nincs olyan már létezõ partíció, amit használhatnék"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "A loopback-hez a windowsos partíció használata"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Melyik partícióra szeretné a Linux4Win-t telepíteni?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Adja meg a méreteket"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "A gyökérpartíció mérete MB-ban: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "A lapozási (swap) partíció mérete MB-ban: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "A Windows partíción található szabad hely felhasználása"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Melyik partíciót szeretné átméretezni?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "A windowsos fájlrendszer jellemzõinek kiszámítása"
-
-# msgstr "A Windows fájlrendszer bounds kiszámítása"
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"A FAT-átméretezõ nem tudja kezelni a partíciót.\n"
-"A következõ hiba keletkezett: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A windowsos partíció túlzottan töredezett. Futtassa elõbb a \"defrag\" "
-"programot."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"FIGYELEM!\n"
-"\n"
-"A DrakX most átméretezi a windowsos partíciót. Ez a mûvelet veszélyes.\n"
-"Ha még nem tette meg, futtassa le a scandisk-et a windowsos partíción\n"
-"(esetleg a defrag programot is). Ehhez ki kell lépnie a telepítõbõl.\n"
-"Mentse le az adatokat, majd indítsa újra a telepítõt.\n"
-"Ha biztos abban, hogy folytatni szeretné, nyomja meg az \"OK\"-t."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Mekkora helyet szeretne fenntartani a Windowsnak itt:"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "%s partíció"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "A FAT átméretezése nem sikerült: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nincs átméretezhetõ illetve loopback-ként használható FAT partíció, vagy "
-"nincs elég hely"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "A teljes lemez törlése"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "A Windows(TM) eltávolítása"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Több merevlemeze van. Melyikre telepítsem a Linuxot?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"MINDEN létezõ partíció és rajtuk minden adat elvész a(z) \"%s\" meghajtón"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Egyéni lemezpartícionálás"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Az fdisk használata"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Most partícionálható a(z) %s.\n"
-"Ha kész, ne feledje elmenteni a változásokat a \"w\"-vel"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nincs elég szabad hely a windowsos partíción"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nincs elég szabad hely a telepítéshez"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "A DrakX partícionálási varázslója a következõket javasolja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partícionálási hiba: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "A hálózatkezelés elindítása"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "A hálózatkezelés leállítása"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Hiba történt, de nem tudom megfelelõen lekezelni.\n"
-"Folytatás az Ön saját felelõsségére."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "A következõ csatolási pont kétszer van megadva: %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Néhány fontos csomagot nem tudtam telepíteni.\n"
-"Ez azt jelenti, hogy vagy a CD-meghajtó, vagy a CD lemez\n"
-"hibás. A CD lemezt egy, már feltelepített gépen a következõ\n"
-"parancs segítségével tesztelheti le:\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Üdvözöljük - %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nincs elérhetõ floppy-meghajtó"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "A következõ lépés: \"%s\"\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"A rendszer gyenge erõforrásokkal rendelkezik. Elõfordulhat, hogy problémái\n"
-"lesznek a Mandrake Linux telepítésével. Ha így történik, próbálkozzon\n"
-"szöveges módú telepítéssel: CD-rõl való rendszerindítást követõen nyomjon\n"
-"\"F1\"-et, majd írja be azt, hogy \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Telepítési mód"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Válasszon a következõ telepítési osztályok közül:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Az Ön által kiválasztott csomagcsoportok összmérete kb. %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ha ennél kevesebb helyet szán a rendszernek,\n"
-"adjon meg egy százalékos értéket.\n"
-"\n"
-"Ha alacsony értéket ad meg, akkor a kiválasztott csomagok közül\n"
-"csak a fontosabbak kerülnek telepítésre; ha 100%%-ot ad meg,\n"
-"a DrakX minden kijelölt csomagot telepít."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"A merevlemezen csak a csomagok %d%%-ának van hely.\n"
-"\n"
-"Ha ennél kevesebbet kíván telepíteni,\n"
-"változtassa meg a kijelzett százalék értékét.\n"
-"Ha alacsony százalék-értéket ad meg, a telepítõ csak a\n"
-"legfontosabb csomagokat telepíti; ha %d%%-ot ad meg,\n"
-"akkor a lehetõ legtöbb csomag kerül telepítésre."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Részletesebben válogathat a következõ lépés részeként."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Telepítendõ csomagok százaléka"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Csomag-csoportok kiválasztása"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Csomagok egyedi kiválasztása"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Összméret: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Hibás csomag"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Név: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzió: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Méret: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Fontosság: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nem választhatja ki ezt a csomagot, mert nincs elég hely a merevlemezen."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "A telepítõ a következõ csomagokat fogja telepíteni"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "A telepítõ a következõ csomagokat távolítja el"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ez a csomag nem jelölhetõ ki illetve nem törölhetõ a kijelölése"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ez egy kötelezõ csomag, nem lehet megszüntetni a kijelölését"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nem törölhetõ ennek a csomagnak a kijelölése, mert már telepítve van"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ezt a csomagot frissíteni kell!\n"
-"Biztos, hogy törölni kívánja a kijelölését?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Nem törölheti ennek a csomagnak a kijelölését. Ez a csomag frissítendõ!"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Automat. kijelölt csomagok mutatása"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Telepítés"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Betöltés/floppyra mentés"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "A csomagkiválasztás frissítése"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimális telepítés"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Válassza ki a telepítendõ csomagokat"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Telepítés"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Becslés"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Hátralévõ idõ "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Egy kis türelmet kérek; a telepítés elõkészítése folyik"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d csomag"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "A(z) %s csomag telepítése"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Elfogadom"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Nem fogadom el"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cserélje ki a CD-t a meghajtóban!\n"
-"\n"
-"Tegye be a(z) \"%s\" feliratú lemezt, és nyomja meg az \"OK\" gombot.\n"
-"Ha nincs ilyen lemeze, nyomja meg a \"Mégsem\" gombot, így errõl a CD-rõl\n"
-"nem történik telepítés."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Ettõl függetlenül folytassam?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Hiba történt a csomagok rendezésekor:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Hiba történt a csomagok telepítésekor:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Figyelmeztetés\n"
-"\n"
-"Olvassa el alaposan az alábbi licencfeltételeket. Ha valamelyik részt nem\n"
-"fogadja el, akkor nem kezdheti el a telepítést a következõ CD-rõl. Ha a\n"
-"\"Nem fogadom el\" lehetõséget választja, akkor a telepítést ezen "
-"adathordozó\n"
-"kihagyásával kell folytatnia.\n"
-"\n"
-"\n"
-"A következõ CD-n található néhány szoftverkomponens nem a GPL\n"
-"(vagy más hasonló) licenc alá tartozik. Mindegyik ilyen komponens\n"
-"saját, egyéni licencegyezménnyel rendelkezik.\n"
-"Olvassa el és fogadja el ezeket a licencfeltételeket a komponens\n"
-"használatba vétele vagy továbbadása elõtt.\n"
-"Ezek a feltételek általában nem engedélyezik a komponens továbbadását,\n"
-"lemásolását (kivéve biztonsági másolatként), forgalomba hozását,\n"
-"visszafejtését, gépi kódú kilistázását, visszafordítását és módosítását.\n"
-"Bármelyik feltétel be nem tartása esetén a licenc érvényét veszti.\n"
-"Ha a licencegyezmény külön nem engedélyez többet, akkor a telepítés\n"
-"csak egy rendszerre engedélyezett, és a komponens nem használható\n"
-"közösen, a hálózaton. Ha pontosabb információra van szüksége,\n"
-"lépjen kapcsolatba a komponens forgalmazójával vagy készítõjével.\n"
-"A komponensek átadása, róluk másolat készítése harmadik fél részére\n"
-"általában nem engedélyezett (beleértve a dokumentációt is).\n"
-"\n"
-"\n"
-"A következõ CD-n található komponensek minden joga azok szerzõit illeti\n"
-"meg, és a szoftvertermékekre vonatkozó szellemi és szerzõi jogi\n"
-"törvények érvényesek rájuk.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Hiba lépett fel"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Biztosan ki szeretne lépni a telepítõbõl?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licencegyezmény"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Bevezetés\n"
-"\n"
-"A továbbiakban az operációs rendszerre és a Mandrake Linux disztribúcióban "
-"elérhetõ\n"
-"különféle komponensekre \"Szoftvertermékek\" néven hivatkozunk. A "
-"Szoftvertermékek körébe - nem\n"
-"kizárólagosan - beletartoznak az operációs rendszerhez és a Mandrake Linux "
-"disztribúció\n"
-"különféle komponenseihez kapcsolódó programok, módszerek, szabályok és "
-"dokumentáció.\n"
-"\n"
-"\n"
-"1. Licencegyezmény\n"
-"\n"
-"Kérjük, olvassa el jelen dokumentumot figyelmesen. Ezen dokumentum egy, a "
-"Szoftvertermékekre\n"
-"vonatkozó licencegyezmény Ön és a MandrakeSoft S.A. között.\n"
-"Ha a Szoftvertermékeket bármiféle módon telepíti, sokszorosítja vagy "
-"felhasználja,\n"
-"azzal Ön elfogadja jelen licenc kikötéseit és feltételeit, továbbá "
-"beleegyezik abba, hogy\n"
-"azoknak teljes mértékben megfelel.\n"
-"Ha Ön a Licenc bármely részével nem ért egyet, akkor az Ön számára nem "
-"engedélyezett a\n"
-"Szoftvertermékek telepítése, sokszorosítása illetve felhasználása.\n"
-"Bármely olyan kísérlet, amely a Szoftvertermékeknek a jelen licenc "
-"kikötéseitõl és feltételeitõl\n"
-"eltérõen való telepítésére, sokszorosítására illetve felhasználására "
-"irányul, érvénytelenítõ\n"
-"jellegû, és megvonja az Önnek ezen licenc által adott jogokat. A licencjogok "
-"megszûnését\n"
-"követõen Önnek azonnali hatállyal meg kell semmisítenie a Szoftvertermékek "
-"összes, Ön által\n"
-"birtokolt példányát.\n"
-"\n"
-"\n"
-"2. Korlátozott garancia\n"
-"\n"
-"A Szoftvertermékek és az azokhoz tartozó dokumentáció \"olyan amilyen\" "
-"állapotban állnak\n"
-"rendelkezésre. Garancia nincsen azokra - a törvények által engedélyezett "
-"mértékben.\n"
-"A MandrakeSoft S.A. - a törvények által engedélyezett mértékben - semmilyen "
-"körülmények\n"
-"között sem vonható felelõsségre a Szoftvertermékek használatából vagy "
-"használhatatlanságából\n"
-"származó speciális, elõre nem látott, közvetlen vagy közvetett károkért "
-"(korlátozás nélkül\n"
-"beleértve a következõket: üzleti veszteség, üzleti tevékenység megszakadása, "
-"pénzügyi\n"
-"veszteség, jogi díjak illetve bírósági ítéletbõl származó büntetés, vagy "
-"bármilyen\n"
-"származékos veszteség); még abban az esetben sem, ha a MandrakeSoft S.A. "
-"tájékoztatva lett\n"
-"az ilyesféle károk bekövetkezésének lehetõségérõl.\n"
-"\n"
-"KORLÁTOZOTT FELELÕSSÉG A BIZONYOS ORSZÁGOKBAN TILTOTT SZOFTVEREK "
-"BIRTOKLÁSÁVAL ILLETVE\n"
-"HASZNÁLATÁVAL KAPCSOLATBAN\n"
-"\n"
-"A MandrakeSoft S.A. és disztribútorai - a törvények által engedélyezett "
-"mértékben - semmilyen\n"
-"körülmények között sem vonhatók felelõsségre az olyan - speciális, elõre nem "
-"látott, közvetlen\n"
-"vagy közvetett - károkért (korlátozás nélkül beleértve a következõket: "
-"üzleti veszteség,\n"
-"üzleti tevékenység megszakadása, pénzügyi veszteség, jogi díjak illetve "
-"bírósági\n"
-"ítéletbõl származó büntetés, vagy bármilyen származékos veszteség), amely "
-"károk a\n"
-"szoftverkomponensek birtoklásából vagy használatából illetve a helyi "
-"törvények által\n"
-"tiltott vagy korlátozott szoftverkomponenseknek egy Mandrake Linux címrõl "
-"való\n"
-"letöltésébõl származnak.\n"
-"Ezen korlátozott felelõsség vonatkozik többek közt a Szoftvertermékekben "
-"levõ titkosító\n"
-"komponensekre is.\n"
-"\n"
-"\n"
-"3. A GPL és az ahhoz kapcsolódó licencek\n"
-"\n"
-"A Szoftvertermékek különbözõ személyek és intézmények által készített "
-"komponensekbõl állnak.\n"
-"A legtöbb komponensre a GNU General Public Licence (GNU Általános Nyilvános "
-"Licenc; a\n"
-"továbbiakban: GPL) és hasonló licencek kikötései és feltételei vonatkoznak.\n"
-"Ezen licencek java része lehetõvé teszi a megfelelõ komponensek használatát, "
-"sokszorosítását,\n"
-"módosítását illetve terjesztését. Bármely komponens használata elõtt olvassa "
-"el figyelmesen\n"
-"a komponensre vonatkozó licenc kikötéseit és feltételeit. Egy komponens "
-"licencére vonatkozó\n"
-"kérdést nem a MandrakeSoft céghez, hanem az adott komponens szerzõjéhez kell "
-"irányítani.\n"
-"A MandrakeSoft S.A. által fejlesztett programok a GPL licenc hatálya alá "
-"tartoznak.\n"
-"A MandrakeSoft S.A. által írt dokumentációs anyagokra egy speciális licenc "
-"vonatkozik.\n"
-"További részletek a dokumentációban.\n"
-"\n"
-"\n"
-"4. Szellemi tulajdonra vonatkozó jogok\n"
-"\n"
-"A Szoftvertermékek komponenseire vonatkozó összes jog az adott komponensek "
-"szerzõit illeti meg,\n"
-"és a szoftverekre vonatkozó szellemi tulajdoni illetve szerzõi jogi "
-"(copyright) törvények\n"
-"védelme alatt áll.\n"
-"A MandrakeSoft S.A. fenntartja a jogot arra, hogy módosítsa illetve "
-"átalakítsa a\n"
-"Szoftvertermékeket - teljes egészében vagy részben, bármilyen módon illetve "
-"bármilyen célra.\n"
-"A \"Mandrake\", a \"Mandrake Linux\" és az azokhoz tartozó logók a "
-"MandrakeSoft S.A. védjegyei.\n"
-"\n"
-"\n"
-"5. Vonatkozó törvények\n"
-"\n"
-"Ha jelen egyezmény bármely része bírósági ítélet alapján semmisnek, "
-"törvénytelennek vagy\n"
-"alkalmazhatatlannak van nyilvánítva, akkor azon rész jelen szerzõdésbõl "
-"kizárásra kerül.\n"
-"Az egyezmény többi - alkalmazható - részét Önnek továbbra is be kell "
-"tartania.\n"
-"Jelen licenc kikötései és feltételei Franciaország törvényeinek hatálya alá "
-"tartoznak.\n"
-"A jelen licenc kikötéseivel kapcsolatos viták lezárásának legelõnyösebb "
-"módja egy\n"
-"bíróságon kívül történõ megegyezés. Végsõ lehetõségként a vitás ügy a "
-"megfelelõ\n"
-"párizsi (Franciaország) bíróságra kerül.\n"
-"Ha jelen dokumentummal kapcsolatban kérdése van, vegye fel a kapcsolatot a "
-"MandrakeSoft S.A.\n"
-"céggel.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Billentyûzet"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Válasszon billentyûzetkiosztást."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Itt található a billentyûzetek listája"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Melyik telepítési módot választja?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Telepítés/frissítés"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Új telepítés vagy frissítés?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Ajánlott"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Szakértõ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Frissítés"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Csak a csomagok frissítése"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Adja meg az egér típusát."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Egér port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Válassza ki, hogy melyik soros porthoz csatlakozik az egere."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Egérgomb-emuláció"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "A 2. gomb emulálása"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "A 3. gomb emulálása"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kártyák beállítása..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE beállítások"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nincs elérhetõ partíció"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Csatolási pontok keresése a partíciókon"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Válassza ki a csatolási pontokat"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nem sikerült beolvasni a partíciós táblát, túl rossz állapotban van.\n"
-"Meg lehet próbálni a hibás partíciók alapállapotba hozását (MINDEN ADAT\n"
-"ELVÉSZ EZEKRÕL!). Ha ezt nem fogadja el, akkor a DrakX nem fogja módosítani\n"
-"a partíciós táblát (a hiba: %s).\n"
-"\n"
-"Törölni szeretné az összes partíciót?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"A DiskDrake nem tudta rendesen beolvasni a partíciós táblát.\n"
-"Folytatás az Ön saját felelõsségére."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nincs elég szabad hely az 1 MB-os betöltõprogramnak! A telepítés "
-"folytatható, de a rendszer indításához létre kell hozni egy rendszerindító "
-"partíciót a DiskDrake-kel."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "A gyökérpartíció nem található, ezért nem lehet elvégezni a frissítést"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Gyökérpartíció"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Melyik a gyökérpartíció (/) a rendszerben?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"A partíciós tábla változásai csak a gép újraindítása után lépnek érvénybe"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Válassza ki a formázandó partíciókat"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ellenõrizzem a rossz blokkokat?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "A partíciók formázása"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s fájl létrehozása és formázása"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Betelt a lapozóterület, növelje meg a telepítés befejezéséhez"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "A rendelkezésre álló csomagok keresése"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "A frissítendõ csomagok keresése"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"A rendszeren nem maradt elég hely a telepítéshez vagy frissítéshez (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Teljes (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimális (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Javasolt (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Válasszon egy funkciót annak megfelelõen, hogy betölteni kíván egy\n"
-"csomagkijelölést vagy a jelenlegi kijelölést szeretné elmenteni.\n"
-"A formátum ugyanaz, mint az automatikus telepítõfloppyknál."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Betöltés floppyról"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Betöltés floppyról"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Csomagkijelölés"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Tegye be a csomagkijelölést tartalmazó floppyt a meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Mentés floppyra"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "A kijelölt összméret nagyobb, mint a rendelkezésre álló hely"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "A telepítés típusa"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Egyetlen csomagcsoportot sem jelölt ki.\n"
-"Válassza ki, milyen fajta minimális telepítést szeretne."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X-szel együtt"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Alapvetõ dokumentációval (javasolt)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Valóban minimális telepítés (urpmi sincs)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ha a felsorolt CD-k rendelkezésre állnak, kattintson az OK gombra.\n"
-"Ha egy CD sem áll rendelkezésre a felsoroltak közül, akkor kattintson\n"
-"a Mégsem gombra.\n"
-"Ha a felsoroltak közül néhány CD hiányzik, törölje a kijelölésüket, majd\n"
-"kattintson az OK gombra."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "A(z) \"%s\" címkéjû CD"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "A telepítés elõkészítése"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"A(z) %s csomag telepítése\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Telepítés utáni beállítások"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Tegye be a rendszerindító floppyt a(z) \"%s\" meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Tegye be a frissítõmodulokat tartalmazó floppyt a(z) \"%s\" meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Most lehetõség nyílik arra, hogy titkosítással foglalkozó szoftverrészeket\n"
-"töltsön le.\n"
-"\n"
-"FIGYELEM:\n"
-"\n"
-"Mivel a titkosítással foglalkozó szoftvermodulok használatát különbözõ\n"
-"törvények szabályozzák, kizárólag a fogyasztó és/vagy felhasználó\n"
-"felelõssége eldönteni, hogy jogosult-e letölteni, tárolni és/vagy használni\n"
-"a kérdéses szoftvert.\n"
-"\n"
-"Továbbá, a fogyasztó és/vagy felhasználó különös figyelmet kell fordítson a\n"
-"helyi törvények és rendeletek betartására. Amennyiben a fogyasztó és/vagy\n"
-"felhasználó nem tartja be ezeket a törvényeket, súlyos büntetés szabható ki\n"
-"rá.\n"
-"\n"
-"A Mandrakesoft, a gyártók, vagy a szállítók semmilyen körülmények között\n"
-"sem tehetõk felelõssé azon speciális, közvetett vagy járulékos károk\n"
-"keletkezéséért (beleértve, de nem kizárólagosan, a következõket:\n"
-"profitveszteség, üzletmenetben bekövetkezett zavarok, kereskedelmi adatok\n"
-"vesztése, valamint bármilyen más anyagi kár és esetlegesen bíróság által\n"
-"megítélt kártérítés), amik azon szoftverek használatából, birtoklásából "
-"vagy\n"
-"csak a letöltésébõl erednek, amelyekhez a felhasználó és/vagy fogyasztó "
-"ezen\n"
-"megállapodás aláírása után hozzáférhet.\n"
-"\n"
-"\n"
-"Ha bármilyen kérdése van a fenti szerzõdéssel kapcsolatban, vegye fel\n"
-"a kapcsolatot a Mandrakesoft irodájával:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Lehetõsége van arra, hogy letöltse a disztribúció kiadása után\n"
-"frissített csomagokat.\n"
-"\n"
-"Ez általában biztonsági javításokat és hibajavításokat jelent.\n"
-"A funkció használatához szükség van egy beállított\n"
-"internetkapcsolatra.\n"
-"\n"
-"Szeretné feltelepíteni a frissítéseket ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kapcsolódás a Mandrake Linux webkiszolgálójához, az elérhetõ "
-"tükörkiszolgálók listájának lekérdezése"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Válasszon tükörkiszolgálót, ahonnan letölti a csomagokat"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Kapcsolatfelvétel a tükörkiszolgálóval, elérhetõ csomagok listájának "
-"letöltése"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Melyik idõzónát választja?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "A gép órája GMT-idõt mutat"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatikus idõszinkronizáció (NTP-vel)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-kiszolgáló"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Távoli CUPS-kiszolgáló"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nincs nyomtató"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Van ISA hangkártyája?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"A hangkártya beállításához futtassa az \"sndconfig\" programot a telepítés "
-"után"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"A telepítõ nem talált hangkártyát. Futtassa a \"harddrake\" programot a "
-"telepítés után"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Összefoglalás"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Egér"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Idõzóna"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Nyomtató"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-kártya"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Hangkártya"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-tuner kártya"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Helyi fájlok"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Rendszergazdai (root) jelszó beállítása"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nincs jelszó"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ez a jelszó túl egyszerû (legalább %d karakter hosszúnak kell lennie)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Felhasználóazonosítás"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP-alapú azonosítás"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP alap-DN"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-kiszolgáló"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS-alapú azonosítás"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-tartomány"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-kiszolgáló"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Az indítólemez segítségével a Linux rendszer akkor is elindítható, ha a\n"
-"merevlemezrõl történõ indítás nem mûködik. Ez például akkor hasznos, ha\n"
-"nem kíván rendszerindító programot telepíteni, vagy egy másik operációs\n"
-"rendszer eltávolította a SILO-t, vagy ha a program nem tudja lekezelni a\n"
-"gép hardverét. Az indítólemez a Mandrake helyreállítólemezzel is\n"
-"használható, hogy súlyos meghibásodás esetén a rendszer állapota könnyen\n"
-"visszaállítható legyen.\n"
-"\n"
-"Ha szeretne indítólemezt készíteni, helyezzen be egy floppyt az\n"
-"elsõ meghajtóba és nyomja meg az \"OK\" gombot."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Elsõ floppy-meghajtó"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Második floppy-meghajtó"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Kihagyás"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Az indítólemez lehetõvé teszi, hogy a Linux operációs rendszert a normál\n"
-"rendszerindító program nélkül is el lehessen indítani. Ez akkor hasznos,\n"
-"ha nem kíván LILO-t (illetve GRUB-ot) telepíteni a gépre, vagy egy másik\n"
-"operációs rendszer letörli a LILO-t, vagy a LILO nem mûködik az adott\n"
-"hardver-konfigurációval. Az indítólemezt használhatja a Mandrake\n"
-"helyreállítólemezzel együtt is, így sokkal egyszerûbb a helyreállítás egy\n"
-"rendszerhiba után. Szeretne most indítólemezt készíteni a rendszerhez?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(Figyelmeztetés: Mivel XFS fájlrendszert használ a gyökérpartícióhoz,\n"
-"ezért 1,44 megabájtos floppylemezbõl valószínûleg nem készíthetõ\n"
-"indítólemez - az XFS nagyméretû meghajtóprogramot igényel.)"
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Nincs elérhetõ floppy-meghajtó"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Válassza ki azt a floppy-meghajtót, amelyet az indítólemez elkészítéséhez "
-"használni kíván"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Tegyen egy floppyt a(z) \"%s\" meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Indítólemez készül"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Rendszerbetöltõ elõkészítése"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"A gép típusa feltehetõen OldWorld vagy Ismeretlen,\n"
-"ezért a Yaboot rendszerindító program nem fog mûködni.\n"
-"A telepítés folytatható, de az indításhoz\n"
-"a BootX-et kell majd használni."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Szeretné az aboot-ot használni?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Hiba az aboot telepítésekor.\n"
-"Próbáljam újra a telepítést akkor is, ha ez esetleg tönkreteszi az elsõ\n"
-"partíciót?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Rendszerindító program telepítése"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A rendszerbetöltõ telepítése nem sikerült. A hiba a következõ:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Lehet, hogy módosítani kell az Open Firmware rendszerindítási eszköz\n"
-" beállításain a rendszerindító program használatához. Ha újraindítás után\n"
-" nem jelenik meg a prompt, nyomja le a Command-Option-O-F-et induláskor\n"
-" és írja be ezt: setenv boot-device %s,\\\\:tbxi\n"
-" Majd gépelje be ezt: shut-down\n"
-"A következõ indítás után meg kell jelennie a promptnak."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Tegyen egy üres floppyt a(z) \"%s\" meghajtóba"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Automatikus telepítõfloppy készítése"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"A telepítés nem teljes, mivel egyes lépések kimaradtak.\n"
-"\n"
-"Biztos, hogy ki akar lépni?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulálunk, a telepítés sikeresen befejezõdött. Vegye ki az adathordozót,\n"
-"amirõl a rendszer indítása történt (CD, floppylemez, ...), majd nyomja le\n"
-"az Enter billentyût a rendszer újraindításához.\n"
-"\n"
-"Az ehhez a Mandrake Linux verzióhoz elérhetõ javításokról a következõ\n"
-"helyen olvashat:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"A rendszer beállításával kapcsolatban a Hivatalos Mandrake Linux\n"
-"Felhasználói Kézikönyvben talál további információkat."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Automatikus telepítõfloppy készítése"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Az automatikus telepítés akár teljesen automatikus is lehet,\n"
-"ebben az esetben az egész merevlemez tartalmát módosíthatja.\n"
-"Elsõsorban akkor ajánlott, ha másik gépre is telepíteni kívánja\n"
-"a rendszert.\n"
-"\n"
-"Lehetõség van a telepítés újrajátszására is.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatikus"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Újrajátszás"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Csomagösszeállítás mentése"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux telepítés %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt+Tab> lépegetés | <Szóköz> kiválasztás | <F12> következõ képernyõ "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "nincs \"kdesu\""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "nincs \"consolehelper\""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Válasszon egy fájlt"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Speciális"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Alapvetõ"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Egy kis türelmet kérek"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Információ"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "A fa kibontása"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "A fa összecsukása"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Váltás sima és csoportok szerint rendezett nézet között"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Nem megfelelõ választás, próbálja meg újra\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Melyiket választja? (az alapértelmezés: %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Kitöltendõ bejegyzések:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Melyiket választja? (0/1, az alapértelmezés: \"%s\") "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "\"%s\" gomb: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Szeretne rákattintani erre a gombra? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Melyiket választja? (az alapértelmezés: \"%s\"%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Sok választási lehetõség van (%s).\n"
-
-# Number is used to designate approximately the range of entries
-# you wish to edit because all of them would not fit on-screen.
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Jelölje ki a szerkeszteni kívánt 10-es tartomány elsõ számát,\n"
-"vagy csak nyomja le az Enter billentyût a továbblépéshez.\n"
-"Melyiket választja? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Megjegyzés: egy címke módosult:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Újraküldés"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "cseh (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "német"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak-féle"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "spanyol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "finn"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "francia"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norvég"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "lengyel"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "orosz"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "svéd"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "angol (UK) billentyûzet"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "USA-billentyûzet"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "albán"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "örmény (régi)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "örmény (írógép)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "örmény (fonetikus)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerbajdzsáni (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belga"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "bolgár (fonetikus)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "bolgár (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brazil (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "fehérorosz"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "svájci (német kiosztás)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "svájci (francia kiosztás)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "cseh (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "német (\"dead key\" nélkül)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "dán"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak-féle (USA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-féle (norvég)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak-féle (svéd)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "észt"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "grúz (\"orosz\" kiosztás)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "grúz (\"latin\" kiosztás)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "görög"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "magyar"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "horvát"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "izraeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "izraeli (fonetikus)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "iráni"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "izlandi"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "olasz"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japán 106-billentyûs"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "koreai billentyûzet"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latin-amerikai"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "litván AZERTY (régi)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "litván AZERTY (új)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "litván \"számsor\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "litván \"fonetikus\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "lett"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "macedón"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "holland"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "lengyel (qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "lengyel (qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugál"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "kanadai (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "román (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "román (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "orosz (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "szlovén"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "szlovák (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "szlovák (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "szerb (cirill)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "thaiföldi billentyûzet"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "tadzsik billentyûzet"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "török (hagyományos \"F\" modell)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "török (modern \"Q\" modell)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukrán"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "USA-billentyûzet (nemzetközi)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietnámi \"számsor\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "jugoszláv (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Jobb Alt gomb"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "A két Shift gomb egyszerre"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control és Shift gombok egyszerre"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock gomb"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl és Alt gombok egyszerre"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt és Shift gombok egyszerre"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Menu\" gomb"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Bal \"Windows\" gomb"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Jobb \"Windows\" gomb"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Körkörös csatlakoztatás - %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Elõször törölje az összes logikai kötetet\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"A 2.2-es kernelekhez nincsen PCMCIA-támogatás. Használjon 2.4-es kernelt."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun egér"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Általános PS/2-es görgõs egér"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 gombos"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Általános 2 gombos egér"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Általános"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Görgõs"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "Soros"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Általános 3 gombos egér"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (soros, régi C7 típus)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 gombos"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 gombos"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "egyik sem"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "nincs egér"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Az egér letesztelése"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Az egér aktiválásához "
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOZGASSA AZ EGÉRGÖRGÕT!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Befejezés"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Következõ ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Elõzõ"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Elfogadja?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Csatlakozás az internethez"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Az ADSL-en keresztüli csatlakozás legtöbbször PPPOE-vel történik,\n"
-"de elõfordul a PPTP és a DHCP is.\n"
-"A PPPOE-t válassza, ha nem biztos a válaszban."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speed Touch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP használata"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE használata"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP használata"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Melyik DHCP-klienst szeretné használni?\n"
-"Az alapértelmezés: dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nem található Ethernet hálózati kártya a rendszerben.\n"
-"Nem tudom beállítani ezt a kapcsolattípust."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Hálózati csatoló kiválasztása"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Válassza ki, hogy melyik hálózati adapteren keresztül szeretne csatlakozni "
-"az internetre."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nem találtam hálózati kártyát"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Hálózat beállítása"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Most adja meg a gép nevét (ha ismeri).\n"
-"Néhány DHCP-kiszolgáló csak a gépnév megadása után használható.\n"
-"A teljes nevet kell beírni, például: \"gep.vallalat.hu\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Gépnév"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Hálózatbeállító varázsló"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Külsõ ISDN-modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Belsõ ISDN-kártya"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Milyen típusú az ISDN-kapcsolat?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Milyen típusú ISDN-beállításokat szeretne használni?\n"
-"\n"
-"  - A régi típusú beállítás az isdn4net-re épül. Ez igen hatékony\n"
-"eszközöket tartalmaz, de beállítása nehézkes, és nem szabványos.\n"
-"\n"
-"  - Az új típusú beállítás könnyen átlátható, szabványos,\n"
-"de kevesebb segédeszköz tartozik hozzá.\n"
-"\n"
-"Ha nincs kizáró ok, akkor inkább az utóbbit válassza.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Új beállítás (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Régi beállítás (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-beállítások"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Adja meg a szolgáltatója nevét.\n"
-"Ha az nincs benne a listában, válassza az \"Unlisted\"-et"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Európai protokoll"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Európa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "A világ többi része"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll a világ többi részén \n"
-" D csatorna nélkül (bérelt vonal)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Melyik protokollt szeretné használni?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Milyen típusú kártyával rendelkezik?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nem tudom"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Amennyiben ISA kártyája van, a következõ képernyõn látható értékek\n"
-"beállítása lényeges.\n"
-"\n"
-"Ha PCMCIA kártyája van, tudnia kell a kártya IRQ és IO értékeit.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Megszakítás"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Folytatás"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Milyen ISDN-kártyája van?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Érzékeltem egy ISDN PCI kártyát, de nem ismertem fel a típusát. Kérem, "
-"válasszon ki egy PCI kártyát a következõ képernyõn."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nem találtam ISDN PCI kártyát. Válasszon ki egyet a következõ képernyõn."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Válassza ki, hogy melyik soros portra csatlakozik a modeme."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Modemes csatlakozás beállításai"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Csatlakozás neve"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonszám"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Felhasználónév"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Szkript-alapú"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminál-alapú"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Tartománynév"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Elsõdleges DNS-kiszolgáló (nem kötelezõ)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Másodlagos DNS-kiszolgáló (nem kötelezõ)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Bonthatja a kapcsolatot vagy újra elvégezheti a beállításokat."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"A kapcsolat újból beállítható."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Jelenleg csatlakozva van az internethez."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Csatlakozás az internethez vagy a kapcsolat újbóli beállítása."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Jelenleg nincs csatlakozva az internethez."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Csatlakozás"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "A kapcsolat bontása"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "A kapcsolat beállítása"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Az internetkapcsolat beállítása"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "A(z) \"%s\" kapcsolat beállítása következik."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"A(z) \"%s\" kapcsolat beállítása következik.\n"
-"\n"
-"\n"
-"A továbblépéshez nyomja meg az OK gombot."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Hálózatbeállítás"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Mivel a hálózaton keresztül telepít, a hálózat beállítása már megtörtént.\n"
-"Kattintson az OK gombra a beállítások megtartásához, vagy a Mégsem gombra\n"
-"a hálózat és az internetkapcsolat újbóli beállításához.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Üdvözöljük a hálózatbeállító varázslóban!\n"
-"\n"
-"A hálózat és az internetkapcsolat beállítása következik.\n"
-"Törölje a kijelölést az opció mellõl, ha nem kér automatikus felismerést.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Adja meg a beállítani kívánt profil nevét"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Automatikus detektálás"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Eszközök keresése..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normál modemes kapcsolat"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detektálva ezen a porton: %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-kapcsolat"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektálva: %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL-kapcsolat"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektálva a(z) %s csatlakozón"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kábeles kapcsolat"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "kábeles kapcsolat detektálva"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Helyi hálózatos kapcsolat"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "Ethernet-kártya/kártyák detektálva"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Válassza ki a beállítani kívánt eszközt"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Egynél több internetkapcsolatot hozott létre.\n"
-"Válassza ki azt, amelyiket használni szeretné.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetkapcsolat"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Jöjjön létre a kapcsolat a rendszer indulásakor?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Hálózatbeállítás"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "A hálózatkezelést újra kell indítani"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Hiba történt a hálózatkezelés újraindításakor: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulálunk! A hálózat és az internet-hozzáférés beállítása befejezõdött.\n"
-"\n"
-"Most érvényesítem az új beállításokat.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Annak elvégzése után érdemes újraindítani az X környezetet,\n"
-"hogy a gépnév módosításából eredõ problémák elkerülhetõk legyenek."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Beállítás közben problémák merültek fel.\n"
-"Tesztelje le a kapcsolatot a net_monitor vagy az mcc használatával. Ha a "
-"kapcsolat nem mûködik, esetleg indítsa el újra a beállítást."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Figyelem! Ez az eszköz már be lett állítva internet-hozzáféréshez.\n"
-"Elég elfogadni a már meglévõ beállításokat.\n"
-"A lenti mezõk módosításával felül lehet bírálni a beállításokat."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Kérem, adja meg a gép IP-beállításait.\n"
-"Minden mezõbe IP-címet írjon pontozott decimális formátumban\n"
-"(pl.: 192.169.10.11)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "A(z) %s hálózati eszköz beállítása"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (meghajtó - %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-cím"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Hálózati maszk"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatikus IP-cím"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Az IP-cím formátuma 1.2.3.4 legyen"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Adja meg a gépe nevét.\n"
-"A teljes nevet kell beírni, például: \"mybox.mylab.myco.com\".\n"
-"Megadhatja az átjáró (gateway) IP-címét is, ha van olyan."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-kiszolgáló"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Átjáró (például %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Átjáró-eszköz"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy-beállítások"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "A hálózati kártya azonosítójának követése (laptopoknál hasznos)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "A proxy valami ilyen kell, hogy legyen: http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "A proxy valami ilyen kell, hogy legyen: ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet-beállítások"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Kipróbáljuk az internetkapcsolatot most?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "A kapcsolat ellenõrzése..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "A rendszer internetes kapcsolata él."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Biztonsági okokból lebontom a kapcsolatot."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Az internetkapcsolat feltehetõen nem aktív.\n"
-"Próbálja meg újból elvégezni a beállítást."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "A kapcsolat beállítása"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Töltse ki vagy ellenõrizze az alábbi mezõket"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kártya IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kártya DMA"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kártya IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kártya IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kártya IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Az Ön saját telefonszáma"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "A szolgáltató neve (pl. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "A szolgáltató telefonszáma"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Elsõdleges DNS-kiszolgáló (nem kötelezõ)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Másodlagos DNS-kiszolgáló (nem kötelezõ)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Válassza ki az országot"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Tárcsázási mód"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Csatlakozási sebesség"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "A csatlakozás várakozási ideje (másodpercben)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Felhasználónév"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Jelszó"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "a csatlakoztatás nem sikerült: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "A kiterjesztett (extended) partíció nem támogatott ezen a platformon"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"A partíciós táblában van egy üres tartomány, de nem tudom használni.\n"
-"Az egyetlen megoldás az elsõdleges partíció áthelyezése úgy, hogy\n"
-"a kiterjesztett partíciók mellé kerüljön az üres hely."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "A(z) %s fájlból való visszaállítás sikertelen: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Hibás mentésfájl"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Hiba a(z) %s fájl írása közben"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Valamilyen probléma van a meghajtóval. \n"
-"Az adatintegritási teszt végrehajtása nem sikerült. \n"
-"Ez azt jelenti, hogy a lemezre való írás tönkreteheti a meghajtó \n"
-"adattartalmát."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "nagyon fontos"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "fontos"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "erõsen ajánlott"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ajánlott"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "opcionális"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Helyi nyomtató"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Távoli nyomtató"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Távoli CUPS-nyomtató"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Távoli lpd-nyomtató"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Hálózati nyomtató (TCP/socket-alapú)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT-nyomtató"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "NetWare-nyomtató"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "A nyomtatóeszköz URI-ja"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "A feladat kimenetének átirányítása egy parancsba"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Ismeretlen modell"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Helyi nyomtatók"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Távoli nyomtatók"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " ezen a párhuzamos porton: \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB nyomtató \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", többfunkciós eszköz ezen a párhuzamos porton: \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", többfunkciós eszköz USB-n"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", többfunkciós eszköz HP JetDirect-en"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", többfunkciós eszköz"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", nyomtatás ide: %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "ezen az LPD kiszolgálón: \"%s\", nyomtató: \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP gép \"%s\", port: %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "ezen a Windows kiszolgálón: \"%s\", megosztás: \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "ezen a Novell kiszolgálón: \"%s\", nyomtató: \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", ezzel a paranccsal: %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "\"Nyers\" nyomtató (nincs meghajtóprogram)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(itt: %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ezen a gépen)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ezen a CUPS-kiszolgálón: \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (alapértelmezés)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Válassza ki a nyomtató csatlakozásának típusát"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hogyan van a nyomtató csatlakoztatva?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"A távoli CUPS-nyomtatókat nem kell beállítani, azokat a program "
-"automatikusan felismeri."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS-beállítások"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Adja meg a CUPS-kiszolgálót"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"A helyi hálózaton levõ CUPS kiszolgálók nyomtatóinak eléréséhez Önnek nem "
-"szükséges beállítania semmiféle nyomtatót; a CUPS kiszolgálók automatikusan "
-"informálják az Ön gépét a rajtuk keresztül elérhetõ nyomtatókkal "
-"kapcsolatban. Az Ön gépe által ismert nyomtatók listája a PrinterDrake "
-"program fõablakának \"Távoli nyomtatók\" részében látható. Ha a CUPS "
-"kiszolgáló egy másik hálózaton van, akkor meg kell adni a CUPS kiszolgáló IP-"
-"címét és - opcionálisan - a portszámot ahhoz, hogy a kiszolgálótól le "
-"lehessen kérdezni a nyomtatóinformációkat. Máskülönben hagyja üresen ezen "
-"mezõket."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"A CUPS beállítása általában automatikusan megtörténik a hálózat jellemzõinek "
-"megfelelõen, hogy a helyi hálózaton található CUPS-nyomtatók használhatók "
-"legyenek. Ha a beállítás nem megfelelõ, akkor kapcsolja ki az \"Automatikus "
-"CUPS-beállítás\" opciót és módosítsa kézzel az /etc/cups/cupsd.conf fájlt. "
-"Ne felejtse ezután újraindítani a CUPS szolgáltatást (például a \"service "
-"cups restart\" paranccsal)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Az IP-cím formátuma 192.168.1.20 legyen"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "A portnak egész számnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-kiszolgáló IP-címe"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatikus CUPS-beállítás"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Eszközök keresése..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "A portok ellenõrzése"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Nyomtató hozzáadása"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Üdvözli a nyomtatóbeállító varázsló.\n"
-"\n"
-"A varázsló lehetõvé teszi helyi és távoli nyomtatók telepítését, amelyeket "
-"akár errõl a géprõl, akár a hálózat többi gépérõl lehet majd használni.\n"
-"\n"
-"A nyomtató telepítéséhez szükséges adatokat a varázsló megkérdezi Öntõl. "
-"Hozzáférést nyújt az elérhetõ nyomtatómeghajtókhoz és a meghajtóprogramok "
-"beállításaihoz, továbbá a nyomtatók kapcsolattípusát is képes beállítani."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Helyi nyomtató"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Üdvözli a nyomtatóbeállító varázsló.\n"
-"\n"
-"A varázsló segítséget nyújt a számítógéphez csatlakoztatott nyomtatók "
-"beállításához.\n"
-"\n"
-"Csatlakoztassa a megfelelõ nyomtatókat a géphez, és kapcsolja be azokat. A "
-"folytatáshoz kattintson a \"Következõ\" gombra; ha viszont nem kívánja most "
-"beállítani a nyomtatókat, akkor kattintson a \"Mégsem\" gombra.\n"
-"\n"
-"Bizonyos számítógépek lefagyhatnak a nyomtató-felderítési folyamat közben. "
-"Ha felderítés nélkül kíván nyomtatót telepíteni, akkor kapcsolja ki a "
-"\"Nyomtatók automatikus felismerése\" opciót. Ha egy olyan távoli nyomtatót "
-"kíván beállítani, amelyet a PrinterDrake nem listáz automatikusan, akkor "
-"használja a program \"Szakértõi mód\" üzemmódját."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Nyomtatók automatikus felismerése"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Gratulálunk, a nyomtató beállítása sikeresen megtörtént.\n"
-"\n"
-"Nyomtatni általában az alkalmazások \"Fájl\" menüjében levõ \"Nyomtatás\" "
-"funkcióval lehet.\n"
-"\n"
-"Ha szeretne egy új nyomtatót felvenni, vagy egy meglevõt eltávolítani "
-"illetve átnevezni, vagy ha szeretné módosítani az alapértelmezés szerinti "
-"beállításokat (papírforrás, nyomtatási minõség, ...), akkor használja a "
-"Mandrake Vezérlõközpont \"Hardver\" részében található \"Nyomtató\" "
-"alkalmazást."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Nyomtatók automatikus felismerése"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"A PrinterDrake program képes felismerni a helyileg csatlakoztatott "
-"párhuzamos- illetve USB-csatlakozású nyomtatókat. Bizonyos gépeken a "
-"nyomtatók automatikus felderítése lefagyaszthatja a rendszert, ami a "
-"fájlrendszerekben hibákat idézhet elõ. Csak akkor használja ezt a "
-"lehetõséget, ha tisztában van ezzel!\n"
-"\n"
-"Szeretne automatikus nyomtatófelderítést?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Automatikus detektálás"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "A nyomtató kézi beállítása"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Felismert eszköz: %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Nyomtató ezen a párhuzamos porton: \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB nyomtató: \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Helyi nyomtató nem található. Egy nyomtató kézi telepítéséhez adjon meg egy "
-"eszköznevet illetve fájlnevet a beviteli sorban (párhuzamos portok: /dev/"
-"lp0, /dev/lp1, ... (amelyek egyenértékûek a következõkkel: LPT1:, "
-"LPT2:, ...), elsõ USB nyomtató: /dev/usb/lp0, második USB nyomtató: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Egy eszköz- vagy fájlnevet kell megadni."
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Helyi nyomtató nem található.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Hálózati nyomtatót csak a rendszer telepítését követõen lehet telepíteni. "
-"Ehhez használja a Mandrake Vezérlõközpont \"Hardver\" részében a \"Nyomtató"
-"\" funkciót."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Hálózati nyomtató telepítéséhez tegye a következõket: kattintson a \"Mégsem"
-"\" gombra, majd kapcsoljon \"Szakértõi mód\" üzemmódba, azután kattintson "
-"ismét a \"Nyomtató hozzáadása\" gombra."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"A rendszer a következõ nyomtatót találta. Ha nem ezt szeretné beállítani, "
-"akkor adjon meg egy eszköznevet illetve fájlnevet a beviteli sorban."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"A rendszer a következõ nyomtatókat találta. Válassza ki, melyik nyomtatót "
-"kívánja beállítani, vagy adjon meg egy eszköznevet illetve fájlnevet a "
-"beviteli sorban."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"A rendszer a következõ nyomtatót találta. A nyomtató automatikusan "
-"beállításra kerül. Ha a nyomtató helytelenül volt felismerve, vagy ha Ön "
-"szeretné módosítani annak beállításait, akkor kapcsolja be a \"Kézi beállítás"
-"\" opciót."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"A rendszer a következõ nyomtatókat találta. Válassza ki, melyik nyomtatót "
-"kívánja beállítani. A nyomtató automatikusan beállításra kerül. Ha a "
-"nyomtató helytelenül volt felismerve, vagy ha Ön szeretné módosítani annak "
-"beállításait, akkor kapcsolja be a \"Kézi beállítás\" opciót."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Válassza ki, melyik portra van csatlakoztatva a nyomtató, vagy adjon meg egy "
-"eszköznevet illetve fájlnevet a beviteli sorban"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Válassza ki, melyik portra van csatlakoztatva a nyomtató."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (párhuzamos portok: /dev/lp0, /dev/lp1, ... (egyenértékûek ezekkel: LPT1:, "
-"LPT2:, ...), elsõ USB nyomtató: /dev/usb/lp0, második USB nyomtató: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Ki kell választania illetve meg kell adnia egy nyomtatót vagy eszközt."
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Kézi beállítás"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Az Ön nyomtatója egy HP többfunkciós eszköz (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 lapolvasóval)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "HPOJ csomag telepítése..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Az eszköz ellenõrzése és a HPOJ beállítása..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "SANE csomag telepítése..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Lapolvasás az Ön HP többfunkciós eszközén"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "A nyomtatóport elérhetõvé tétele a CUPS számára ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "A nyomtató-adatbázis beolvasása..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Távoli lpd nyomtató beállításai"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Távoli lpd nyomtató használatához meg kell adni a nyomtatókiszolgáló nevét "
-"és a nyomtató nevét."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "A távoli gép neve"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "A távoli nyomtató neve"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "A távoli gép neve nem lehet üres!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "A távoli nyomtató neve nem lehet üres!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) nyomtatási beállítások"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Ahhoz, hogy SMB-nyomtatóra tudjon nyomtatni, meg kell adnia a "
-"nyomtatókiszolgáló SMB-nevét (nem biztos, hogy ugyanaz, mint a TCP/IP-"
-"gépnév!) és IP-címét, a megosztott nyomtató nevét, és egy megfelelõ "
-"jogosultságokkal rendelkezõ felhasználó nevét, jelszavát és munkacsoportját."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Az SMB-kiszolgáló neve"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Az SMB-kiszolgáló IP-címe"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Megosztásnév"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Munkacsoport"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "A kiszolgáló nevét vagy IP-címét meg kell adni!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "A Samba megosztásnév üres!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "BIZTONSÁGI FIGYELMEZTETÉS"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Egy windowsos névvel illetve jelszóval történõ nyomtatás beállítása "
-"következik. Egy, a Samba-kliens architektúrájában levõ hiba miatt a jelszó "
-"kódolatlanul bekerül a Samba-kliens azon parancssorába, amely a windowsos "
-"kiszolgáló számára átadja a nyomtatási feladatot. Így ezen gép minden "
-"felhasználójának lehetõsége van arra - például a \"ps auxwww\" parancs "
-"használatával -, hogy megjelenítse a jelszót.\n"
-"\n"
-"Javasoljuk, hogy használja a következõ lehetõségek valamelyikét (azt "
-"mindenféleképpen biztosítani kell - például tûzfal használatával -, hogy "
-"csak a helyi hálózat gépei férjenek hozzá a windowsos kiszolgálóhoz):\n"
-"\n"
-"Használjon a windowsos kiszolgálón egy jelszó nélküli felhasználóazonosítót "
-"(például: \"GUEST\") vagy egy nyomtatási célokra szánt speciális azonosítót. "
-"Ne szüntesse meg a jelszóvédelmet semmilyen személyes azonosítón, és a "
-"rendszergazdai azonosítón sem.\n"
-"\n"
-"Állítsa be a windowsos kiszolgálót úgy, hogy az LPD protokollon keresztül "
-"tegye elérhetõvé a nyomtatót. Ezután állítsa be az errõl a géprõl történõ "
-"nyomtatást \"%s\" kapcsolattípussal a PrinterDrake programban.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Állítsa be a windowsos kiszolgálót úgy, hogy az IPP protokollon keresztül "
-"tegye elérhetõvé a nyomtatót. Ezután állítsa be az errõl a géprõl történõ "
-"nyomtatást \"%s\" kapcsolattípussal a PrinterDrake programban.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Csatlakoztassa a nyomtatót egy linuxos kiszolgálóhoz, és tegye lehetõvé a "
-"windowsos gépek számára az ahhoz kliensként való csatlakozást.\n"
-"\n"
-"Valóban folytatni szeretné a nyomtató ilyen módon történõ beállítását?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare nyomtatóbeállítások"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Ahhoz, hogy NetWare nyomtatóra tudjon nyomtatni, meg kell adnia a NetWare "
-"nyomtatókiszolgáló nevét (ez nem biztos, hogy megegyezik a TCP/IP "
-"gépnévvel!), a nyomtatási sor nevét, és egy megfelelõ jogosultságokkal "
-"rendelkezõ felhasználói nevet és jelszót."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Nyomtatókiszolgáló"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "A nyomtatási sor neve"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Az NCP-kiszolgáló neve üres!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Az NCP-sor neve üres!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/socket-alapú nyomtatási beállítások"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Ahhoz, hogy egy TCP/socket-alapú nyomtatóra nyomtathasson, meg kell adnia a "
-"nyomtatóhoz tartozó gépnevet és opcionálisan a nyomtató portszámát. HP "
-"JetDirect kiszolgálókon a port száma általában 9100; más kiszolgálókon ez "
-"más érték lehet. A hardver kézikönyvében valószínûleg talál további "
-"információt."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "A nyomtató gépneve"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "A nyomtató gépneve üres!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "A nyomtatóeszköz URI-ja"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Közvetlenül megadható a nyomtató elérési URI-ja. Az URI-nak meg kell "
-"felelnie a CUPS vagy a Foomatic elõírásainak. Nem minden URI-típust támogat "
-"minden sorkezelõ."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Érvényes URI-t kell megadni."
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Minden nyomtatóhoz meg kell adni egy nevet (például: \"nyomtató\"). A Leírás "
-"és Hely mezõket nem kötelezõ kitölteni, csak tájékoztatási célt szolgálnak."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "A nyomtató neve"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Leírás"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Hely"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "A nyomtató-adatbázis elõkészítése..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "A nyomtató típusa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"A PrinterDrake összehasonlította a nyomtatófelderítésbõl származó típusnevet "
-"a nyomtatóadatbázisában szereplõkkel, és kiválasztotta a legmegfelelõbb "
-"típust. Nem biztos, hogy ez a választás jó; fõleg akkor, ha a nyomtató nem "
-"szerepel az adatbázisban. Ellenõrizze, hogy helyes-e a választás. Ha helyes, "
-"akkor kattintson \"A típus megfelelõ\" gombra; ha viszont nem, akkor a "
-"\"Típuskiválasztás kézzel\" gombra kattintson. Az utóbbi esetben a következõ "
-"képernyõn lehet kiválasztani a nyomtatótípust.\n"
-"\n"
-"Az Ön nyomtatója a PrinterDrake szerint:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "A típus megfelelõ"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Típuskiválasztás kézzel"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "A nyomtató típusának kiválasztása"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Milyen típusú a nyomtató?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Ellenõrizze, hogy a PrinterDrake helyesen\n"
-"határozta-e meg a nyomtató típusát. Ha a\n"
-"kurzor egy nem megfelelõ típuson áll, vagy\n"
-"a \"Nyers nyomtató\" bejegyzésen, akkor\n"
-"keresse meg a megfelelõ típust a listában."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ha a nyomtatója nem szerepel a listában, akkor válasszon egy azzal "
-"kompatibilis nyomtatót (információk a nyomtató kézikönyvében) vagy egy "
-"hasonlót."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI windowsos nyomtató beállítása"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Ön egy OKI windowsos lézernyomtató beállítását végzi. Ezek a nyomtatók egy "
-"speciális kommunikációs protokollt használnak, ami miatt csak akkor képesek "
-"mûködni, ha az elsõ párhuzamos portra vannak csatlakoztatva. Ha az Ön "
-"nyomtatója egy másik portra vagy egy nyomtatókiszolgálóhoz csatlakozik, "
-"akkor tegye azt át az elsõ párhuzamos portra, még mielõtt tesztoldalt "
-"nyomtatna - máskülönben a nyomtató nem fog mûködni. A kapcsolattípus-"
-"beállítást a meghajtóprogram figyelmen kívül hagyja."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark tintasugaras nyomtató beállítása"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"A Lexmark által biztosított tintasugarasnyomtató-meghajtóprogramok csak "
-"helyi nyomtatókat támogatnak, tehát távoli gépen vagy nyomtatókiszolgálón "
-"levõket nem. Csatlakoztassa a nyomtatót egy helyi portra, vagy állítsa azt "
-"be azon a gépen, amelyhez az csatlakoztatva van."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Ahhoz, hogy nyomtatni tudjon a Lexmark tintasugaras nyomtatóval ezen a "
-"gépen, szüksége lesz a Lexmark (http://www.lexmark.com/) által biztosított "
-"megfelelõ meghajtóprogramokra. Látogasson el az USA-beli honlapra és "
-"kattintson a \"Drivers\" (meghajtóprogramok) gombra. Ezután válassza ki a "
-"megfelelõ nyomtatótípust, majd operációs rendszerként a \"Linux\"-t. A "
-"meghajtóprogramok RPM csomagok illetve interaktív grafikus telepítést "
-"lehetõvé tevõ szkriptek formájában érhetõk el. Nem szükséges a grafikus "
-"felületen végezni a beállítást. Lépjen ki a licencegyezmény után. Ezután "
-"nyomtasson nyomtatófej-igazítási oldalakat \"lexmarkmaintain\"-nel, és "
-"szükség esetén módosítsa a fej-igazítási beállításokat ezzel a programmal."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"A nyomtató alapértelmezései\n"
-"\n"
-"Ellenõrizze, hogy a papírméret és a tinta típusa illetve a nyomtatási mód "
-"(ha van olyan) helyesen van-e beállítva. Lézernyomtató esetén ellenõrizze a "
-"hardverbeállításokat is (memória, duplex egység, extra tálcák). Ha a "
-"nyomtatási minõséget nagyon magasra állítja, akkor a nyomtatási idõ "
-"jelentõsen megnõhet."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "A(z) %s értéknek egész számnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "A(z) %s értéknek számnak kell lennie!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "A(z) %s érték nem esik a megfelelõ tartományba!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Be szeretné állítani a(z) \"%s\"\n"
-"nyomtatót alapértelmezettnek?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Tesztoldalak"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Válassza ki a kinyomtatni kívánt tesztoldalakat.\n"
-"Megjegyzés: a fényképes tesztoldal kinyomtatása sokáig eltarthat, sõt egyes, "
-"kevés memóriával ellátott lézernyomtatókon el sem fog készülni. Általában "
-"elég a normál tesztoldalt kinyomtatni."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Nem kell tesztoldal"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Nyomtatás"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Normál tesztoldal"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Más tesztoldal (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Más tesztoldal (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fényképes tesztoldal"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Ne nyomtasson tesztoldalt"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "A tesztoldal(ak) nyomtatása folyik..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A tesztoldal(aka)t elküldtem a nyomtatóra.\n"
-"Eltarthat egy ideig, amíg a nyomtatás elindul.\n"
-"Nyomtatási állapot:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A tesztoldal(aka)t elküldtem a nyomtatóra.\n"
-"Eltarthat egy ideig, amíg a nyomtatás elindul.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Sikerült a nyomtatás?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "\"Nyers\" nyomtató"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Egy fájl parancssorból (terminálablakból) való nyomtatásához használhatja a "
-"következõ parancsot: \"%s <fájl>\" vagy egy grafikus felületû "
-"nyomtatóeszközt: \"xpp <fájl>\" illetve \"kprinter <fájl>\". A grafikus "
-"eszközök lehetõvé teszik a nyomtató kijelölését és a beállítások egyszerû "
-"módosítását.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ezeket a parancsokat használhatja számos alkalmazás nyomtatási "
-"párbeszédablakában is (a nyomtatási parancsot megadó mezõben), de ott ne "
-"adjon meg fájlnevet, mert a fájlt az alkalmazás fogja biztosítani.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"A(z) \"%s\" parancs szintén lehetõvé teszi a beállítások módosítását egy "
-"bizonyos nyomtatási feladatra vonatkozóan. Egyszerûen adja hozzá a kívánt "
-"paramétereket a parancshoz, például: \"%s <fájl>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Ha szeretne egy listát az aktuális nyomtatóhoz használható opciókról, akkor "
-"olvassa el a lentebbi listát, vagy kattintson a \"Nyomtatási beállítások "
-"listája\" gombra.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Itt láthatók az aktuális nyomtató nyomtatási opciói:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Egy fájl parancssorból (terminálablakból) való nyomtatásához használja a "
-"következõ parancsot: \"%s <fájl>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ezt a parancsot használhatja számos alkalmazás nyomtatási párbeszédablakában "
-"is (a nyomtatási parancsot megadó mezõben), de ott ne adjon meg fájlnevet, "
-"mert a fájlt az alkalmazás fogja biztosítani.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Ha szeretne egy listát az aktuális nyomtatóhoz használható opciókról, akkor "
-"kattintson a \"Nyomtatási beállítások listája\" gombra."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Egy fájl parancssorból (terminálablakból) való nyomtatásához használja a "
-"következõ parancsot: \"%s <fájl>\" vagy ezt: \"%s <fájl>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Az opciók beállításához és a nyomtatási feladatok kezeléséhez használhatja "
-"az \"xpdq\" grafikus felületet is.\n"
-"Ha munkaasztali környezetként a KDE-t használja, akkor rendelkezésére áll "
-"egy \"pánikgomb\" - egy \"Nyomtató leállítása\" feliratú ikon a "
-"munkaasztalon, amellyel azonnali jelleggel leállítható az összes nyomtatási "
-"feladat. Ez például papírberagadás esetén hasznos.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"A(z) \"%s\" és a(z) \"%s\" parancs lehetõvé teszi egy adott nyomtatási "
-"feladat beállításainak módosítását is. Adja hozzá a kívánt beállításokat a "
-"parancshoz, például: \"%s <fájl>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Bezárás"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Nyomtatás/lapolvasás ezen: \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Nyomtatás a(z) \"%s\" nyomtatóra"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Nyomtatási beállítások listája"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Az Ön HP többfunkciós eszközén automatikusan be lett állítva a lapolvasás. "
-"Lapolvasást parancssorból a \"scanimage\" programmal végezhet (\"scanimage -"
-"d hp:%s\" a lapolvasó megadásához, ha több is van); grafikus felületen pedig "
-"az \"xscanimage\" vagy az \"xsane\" programmal. Ha a GIMP programot "
-"használja, akkor a \"Fájl\"/\"Külsõ forrás\" menü megfelelõ menüpontjával is "
-"végezhet lapolvasást. További információkat a \"man scanimage\" és a \"man "
-"sane-hp\" parancsoknak a parancssorban való kiadásával szerezhet.\n"
-"\n"
-"Ehhez az eszközhöz ne használja a \"scannerdrake\" programot!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Az Ön HP többfunkciós eszközén automatikusan be lett állítva a lapolvasás. "
-"Lapolvasást parancssorból a \"ptal-hp %s scan ...\" paranccsal végezhet. "
-"Grafikus felületen és a GIMP programban egyelõre nem lehet lapolvasást "
-"végezni ezen az eszközön. További információkat a \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" fájlban találhat. Ha HP LaserJet 1100 vagy 1200 típusú "
-"nyomtatója van, akkor csak a lapolvasási lehetõség megléte esetén végezhet "
-"lapolvasást azon az eszközön.\n"
-"\n"
-"Ehhez az eszközhöz ne használja a \"scannerdrake\" programot!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "A nyomtató adatainak beolvasása..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "A nyomtatóbeállítások átvitele"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"A(z) %s sorkezelõ nyomtatóbeállításai átmásolhatók a(z) %s sorkezelõ (amely "
-"az aktuális sorkezelõ) számára. Az összes beállítás (nyomtatónév, leírás, "
-"hely, kapcsolódási típus illetve alapértelmezett beállítások) át lesz véve, "
-"de a nyomtatási feladatok nem kerülnek át.\n"
-"A következõ okok miatt nem minden nyomtatási sor vihetõ át:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"A CUPS nem támogatja a Novell-alapú és a kötetlen parancsformátumú "
-"nyomtatókat.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"A PDQ csak a helyi nyomtatókat, a távoli LPD-nyomtatókat és a socket/TCP-"
-"alapú nyomtatókat támogatja.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Az LPD és az LPRng nem támogatja az IPP-nyomtatókat.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Nem vihetõk át azon nyomtatási sorok, amelyek nem ezzel a programmal és nem "
-"a \"foomatic-configure\"-rel készültek."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Továbbá a gyártó által adott PPD fájlokkal beállított nyomtatók és a "
-"közvetlen CUPS-meghajtóval ellátott nyomtatók beállításai nem vihetõk át."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Jelölje ki az átviendõ nyomtatókat, majd kattintson az \n"
-"\"Átvitel\" gombra."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Az átvitel kihagyása"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Átvitel"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"A(z) \"%s\" nevû nyomtató már létezik itt: %s. \n"
-"Kattintson az \"Átvitel\" gombra annak felülírásához.\n"
-"Esetleg adjon meg egy másik nevet vagy hagyja ki a nyomtatót."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"A nyomtató nevében csak angol betû, számjegy és az aláhúzás szerepelhet."
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" nevû nyomtató már létezik,\n"
-"felül szeretné írni annak beállításait?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Új nyomtatónév"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s átvitele..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"A korábbi alapértelmezett nyomtató (\"%s\") beállításai átvitelre kerültek. "
-"Az új %s nyomtatási rendszerben is ez legyen az alapértelmezett nyomtató?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "A nyomtató adatainak frissítése..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Távoli nyomtató beállítása"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "A hálózat elindítása..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Hálózat beállítása most"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Hálózati funkciók nincsenek beállítva"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Egy távoli nyomtató beállítása következik. Ehhez mûködõ hálózati hozzáférés "
-"szükséges, viszont az Ön hálózata még nincsen beállítva. Ha továbblép a "
-"hálózat beállítása nélkül, akkor nem lesz lehetõsége a most beállítandó "
-"nyomtató használatára. Mit szeretne tenni?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Folytatás a hálózat beállítása nélkül"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"A telepítés közben végezhetõ hálózatbeállítás nem indítható el. A gép "
-"újraindítása után vizsgálja meg, hogy a hálózat elérhetõ-e, és javítsa ki a "
-"beállításokat a Mandrake Vezérlõközpont \"Hálózat és internet\"/\"Kapcsolat"
-"\" részében, azután állítsa be a nyomtatót a Mandrake Vezérlõközpont "
-"\"Hardver\"/\"Nyomtató\" részében."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"A hálózati hozzáférés nem volt elindítva, és az elindítása sem lehetséges. "
-"Ellenõrizze a beállításokat és a hardvert, majd próbálkozzon újra a távoli "
-"nyomtató beállításával."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "A nyomtatási rendszer újraindítása..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "magas"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoiás"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Nyomtatórendszer telepítése a következõ biztonsági szinten: %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Most a(z) %s nyomtatási rendszer telepítése következik egy \"%s\" biztonsági "
-"szinten mûködõ gépre.\n"
-"\n"
-"Ez a nyomtatási rendszer egy szolgáltatást (háttérfolyamatot) futtat, amely "
-"nyomtatási feladatokra vár és kezeli azokat. Ez a szolgáltatás elérhetõ "
-"távoli gépekrõl is a hálózaton keresztül, ezért támadási felületet nyújthat. "
-"Emiatt alapértelmezésben csak néhány kiválasztott szolgáltatás kerül "
-"elindításra ezen a biztonsági szinten.\n"
-"\n"
-"Biztos abban, hogy be szeretne állítani nyomtatást ezen a gépen?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "A nyomtatási rendszer elindítása a rendszer indulásakor"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"A nyomtatási rendszer (%s) nem kerül automatikus elindításra a gép "
-"indulásakor.\n"
-"\n"
-"Elképzelhetõ, hogy az automatikus indítás ki lett kapcsolva egy magasabb "
-"biztonsági szintre való váltással, mivel a nyomtatási rendszer támadási "
-"felületet nyújthat.\n"
-"\n"
-"Szeretné a nyomtatási rendszer automatikus indítását ismét bekapcsolni?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "A telepített szoftverek ellenõrzése..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Az LPRng eltávolítása..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Az LPD eltávolítása..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Válassza ki a nyomtatási rendszert"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Melyik nyomtatási rendszert (sorkezelõt) szeretné használni?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "A(z) \"%s\" nyomtató beállítása..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "A Foomatic telepítése..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Nyomtatóbeállítások"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "A PrinterDrake elõkészítése..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Alkalmazások beállítása..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Szeretné beállítani a nyomtatókezelést?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Nyomtatási rendszer: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"A következõ nyomtatók vannak beállítva. Ha módosítani szeretné egy nyomtató "
-"beállításait, vagy alapértelmezetté kíván tenni egy nyomtatót, vagy le "
-"szeretné kérdezni egy nyomtató adatait, vagy egy távoli CUPS-kiszolgálón "
-"levõ nyomtatót elérhetõvé szeretne tenni a StarOffice/OpenOffice.org program "
-"számára, akkor kattintson duplán a megfelelõ nyomtatóra."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"A következõ nyomtatók vannak beállítva. Egy nyomtató beállításainak "
-"módosításához, egy nyomtató alapértelmezetté tételéhez vagy az adatainak a "
-"lekérdezéséhez kattintson duplán a megfelelõ nyomtatóra."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Nyomtatók listájának frissítése (az összes elérhetõ távoli CUPS-nyomtató "
-"megjelenítése érdekében)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Nyomtatási rendszer módosítása"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normál mód"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Szeretne beállítani egy másik nyomtatót?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "A nyomtatóbeállítás módosítása"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Nyomtató: %s\n"
-"Mit szeretne megváltoztatni ennél a nyomtatónál?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Mehet!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "A nyomtató kapcsolódási típusa"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nyomtatónév, leírás, hely"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "A nyomtató gyártója, típusa, meghajtóprogramja"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "A nyomtató gyártója, típusa"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Legyen ez a nyomtató az alapértelmezett"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "A nyomtató felvétele a StarOffice-ba/OpenOffice.org-ba"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "A nyomtató eltávolítása a StarOffice-ból/OpenOffice.org-ból"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tesztoldalak nyomtatása"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Hogyan kell használni ezt a nyomtatót"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Nyomtató eltávolítása"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "A régi \"%s\" nyomtató eltávolítása..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Az alapértelmezett nyomtató"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "A(z) \"%s\" nyomtató lesz ezután az alapértelmezett nyomtató."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "A nyomtató felvétele a StarOffice-ba/OpenOffice.org-ba"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"A(z) \"%s\" nyomtató sikeresen fel lett véve a StarOffice-ba/OpenOffice.org-"
-"ba."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"A(z) \"%s\" nyomtatót nem sikerült felvenni a StarOffice-ba/OpenOffice.org-"
-"ba."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "A nyomtató eltávolítása a StarOffice-ból/OpenOffice.org-ból"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"A(z) \"%s\" nyomtató sikeresen el lett távolítva a StarOffice-ból/OpenOffice."
-"org-ból."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"A(z) \"%s\" nyomtatót nem sikerült eltávolítani a StarOffice-ból/OpenOffice."
-"org-ból."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Biztosan el szeretné távolítani a(z) \"%s\" nyomtatót?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "A(z) \"%s\" nyomtató eltávolítása..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-beállítások"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Üdvözöljük a proxy-beállító segédprogramban!\n"
-"\n"
-"Itt lehet megadni a HTTP- és FTP-proxy adatait,\n"
-"a bejelentkezési információval együtt\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Adja meg a HTTP-proxy adatait.\n"
-"Hagyja üresen, ha nem kíván HTTP-proxyt használni."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Az URL-nek így kell kezdõdnie: \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "A portnak számnak kell lennie"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Adja meg az FTP-proxy adatait.\n"
-"Hagyja üresen, ha nem kíván FTP-proxyt használni."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Az URL-nek így kell kezdõdnie: \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Adja meg a proxy használatához szükséges nevet és jelszót.\n"
-"Hagyja üresen, ha erre nincs szükség."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "felhasználónév"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "jelszó"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "a jelszó még egyszer"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "A jelszavak nem egyeznek meg, adja meg õket még egyszer!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nem tudok partíciót hozzáadni a _formázott_ RAID md%d bejegyzéshez"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nem tudom írni a(z) %s fájlt"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid sikertelen"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Az mkraid végrehajtása nem sikerült (talán hiányzik a raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nincs elég partíció a RAID %d szinthez\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Az ALSA (Advanced Linux Sound Architecture) hangrendszer elindítása"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, a parancsidõzítõ."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Az apmd monitorozza a telepek állapotát és naplóz a syslog-ba.\n"
-"Segítségével leállítható a gép, mielõtt a telep lemerül."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Az \"at\" parancs által ütemezett utasításokat hajtja végre a megadott\n"
-"idõpontban, valamint kötegelt (batch-elt) parancsokat futtat, amikor\n"
-"a gép terhelése alacsony."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"A cron a szabványos parancsütemezõ program a UNIX operációs rendszereken.\n"
-"Segítségével programokat lehet futtatni megadott idõpontokban. A vixie cron\n"
-"az alap cron-nál fejlettebb; biztonságosabb és több beállítási lehetõséggel\n"
-"rendelkezik annál."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"A GPM egértámogatást biztosít a szöveg-alapú (konzolos) linuxos\n"
-"alkalmazások (mint például a Midnight Commander) számára. Lehetõséget\n"
-"nyújt egérrel való másolásra illetve beillesztésre, valamint\n"
-"felbukkanó menük használatára (konzolon)."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"A HardDrake a gép hardverének ellenõrzésére szolgál. Lehetõvé teszi az új\n"
-"vagy megváltozott hardver megfelelõ beállítását."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Az Apache egy WWW szerver. HTML fájlokat és CGI-t tesz elérhetõvé\n"
-"a hálózaton keresztül."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Az \"internet szuperszerver szolgáltatás\" (inetd) felelõs sok hálózati\n"
-"szolgáltatás indításáért, mint például telnet, ftp, rsh és rlogin. Az inetd\n"
-"leállításával minden általa irányított szolgáltatás leáll."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"A csomagszûrés bekapcsolása a Linux kernel 2.2-es változatához.\n"
-"Lehetõvé teszi tûzfal beállítását, hogy a hálózat felõli támadások\n"
-"kivédhetõk legyenek."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ez a csomag tölti be a billentyûzetkiosztást, ami a\n"
-"/etc/sysconfig/keyboard -ban állítható be. A beállítás megváltoztatható\n"
-"a kbdconfig programmal. Ezt bekapcsolva kell hagyni a legtöbb rendszeren."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"A kernel fejlécének automatikus újragenerálása a /boot-ban a\n"
-"/usr/include/linux/{autoconf,version}.h alapján"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"A hardvereszközök automatikus felismerése és beállítása a rendszer "
-"indulásakor."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"A Linuxconf elvégez bizonyos feladatokat a rendszer indításakor,\n"
-"hogy a beállítások konzisztensek maradjanak."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Az lpd nyomtatószolgáltatás szükséges az lpr rendes mûködéséhez. Az lpd\n"
-"alapjában véve egy nyomtatószerver, elrendezi a nyomtatásokat a különbözõ\n"
-"nyomtatók között."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, nagyteljesítményû, nagy rendelkezésre állású\n"
-"kiszolgáló kialakításához használható."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"A named (BIND) egy DNS, azaz tartománynév-kiszolgáló, ennek segítségével\n"
-"feleltetik meg a gépek az IP-címeket és a gépneveket."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Fel- illetve lecsatolja (mount-olja illetve unmount-olja) a különbözõ\n"
-"hálózati fájlrendszereket, mint például az NFS, az SMB\n"
-"(LAN Manager/Windows) és az NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiválja vagy deaktiválja a rendszerindításnál automatikusan induló\n"
-"hálózati csatolókat."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Az NFS egy népszerû, TCP/IP hálózaton használatos fájlmegosztási protokoll.\n"
-"Ez a szolgáltatás egy NFS-kiszolgáló, konfigurálása a /etc/exports\n"
-"fájlon át történik."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Az NFS egy népszerû, TCP/IP hálózaton használatos fájlmegosztási protokoll.\n"
-"Ez a szolgáltatás az NFS lock-olást oldja meg."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"A NumLock automatikus bekapcsolása indításkor a konzolon és az\n"
-"XFree-ben."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Az OKI 4w és az azzal kompatibilis windowsos nyomtatók támogatása."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"A PCMCIA-támogatásra általában azoknak a laptop-felhasználóknak van\n"
-"szükségük, akik PCMCIA modemet vagy hálózati kártyát használnak a gépükben.\n"
-"A szolgáltatás nem indul el, ha nincs beállítva, tehát nyugodtan fel lehet\n"
-"telepíteni olyan gépre is, ahol nincs rá szükség."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"A portmapper kezeli az RPC kapcsolatokat, ezekre többek között a NIS-nek és\n"
-"az NFS-nek van szüksége. A portmap szerverre csak a (NIS vagy NFS) szerver\n"
-"gépeken van szükség."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"A Postfix egy levéltovábbító (MTA) program, amely a leveleket továbbítja\n"
-"a különbözõ gépek között."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Elmenti és visszaállítja a rendszer entrópia-tárolóját, így jobb\n"
-"véletlenszámokat lehet generálni."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Közvetlen elérésû (raw) eszközök blokkeszközökhöz való rendelése (például\n"
-"merevlemezes partíciókhoz), hogy az alkalmazásokból (pl. Oracle)\n"
-"hozzáférhetõk legyenek."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"A routed szolgáltatás lehetõvé teszi, hogy a RIP protokoll segítségével\n"
-"automatikusan frissüljön az IP protokoll által használt útválasztó tábla\n"
-"(IP routing table).\n"
-"A RIP elterjedt a kis hálózatokon; a nagyobb, bonyolultabb hálózatok más\n"
-"útválasztó protokollokat igényelnek."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Az rstat protokoll segítségével a felhasználók információt kaphatnak a\n"
-"(lokális) hálózaton mûködõ gépekrõl."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Az rusers protokoll segítségével a felhasználók lekérdezhetik, hogy melyik\n"
-"gépre ki van bejelentkezve."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Az rwho protokoll segítségével távoli felhasználók kaphatnak egy listát\n"
-"az rwho szolgáltatást futtató gép aktuális felhasználóiról (olyan, mint a\n"
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "A gép hangrendszerének elindítása"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"A syslog-on keresztül naplóznak a szolgáltatások különbözõ naplófájlokba.\n"
-"A syslog használata mindig ajánlott."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Az USB-eszközök meghajtóinak betöltése."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Elindítja az X betûtípus-kiszolgálóját (erre szükség van az XFree "
-"használatához)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Válassza ki, mely szolgáltatások induljanak el rendszerindításkor"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Nyomtatás"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fájlmegosztás"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Rendszer"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Távoli adminisztráció"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Adatbázis-kiszolgáló"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Szolgáltatások: %d aktivált, %d regisztrált"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Szolgáltatások"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "fut"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "leállítva"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Szolgáltatások és démonok"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nem érhetõ el további információ\n"
-"errõl a szolgáltatásról."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Indításkor"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Köszönjük, hogy a Mandrake Linux 8.2 rendszert választotta"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Üdvözöljük a Nyílt Forráskód világában"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"A MandrakeSoft cég sikere a Szabad Szoftver elven alapul. Az Ön új operációs "
-"rendszere a világméretû Linux-közösség együttmûködõ munkájának eredménye."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Csatlakozzon a Szabad Szoftver világához"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Ismerje meg a Nyílt Forráskód közösséget, és váljon tagjává. Tanuljon, "
-"oktasson és segítsen más felhasználókat a közösségi (\"Community\") "
-"weblapjainkon található fórumokhoz csatlakozva."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet és üzenetküldés"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"A Mandrake Linux 8.2 használatával az internet összes szolgáltatása "
-"elérhetõ. Böngésszen a weben és nézzen animációkat a Mozillával vagy a "
-"Konquerorral; olvassa leveleit és kezelje személyes információit az "
-"Evolutionnel vagy a KMaillel; ..."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimédia és grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"A Mandrake Linux 8.2 segítségével kihasználhatja a számítógép multimédiás "
-"lehetõségeit. Játssza le zenéit és videóit, nézzen TV-t, szerkessze képeit a "
-"legújabb programokkal."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Fejlesztés"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"A Mandrake Linux 8.2 egy nagyszerû fejlesztõrendszer. Használja fel a GNU "
-"GCC fordító és a legjobb nyílt forráskódú fejlesztõkörnyezetek erejét."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Vezérlõközpont"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"A Mandrake Linux 8.2 Vezérlõközponttal testreszabható és beállítható az "
-"egész rendszer"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Felhasználói felületek"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"A Mandrake Linux 8.2 rendszerben 11 különbözõ grafikus környezet illetve "
-"ablakkezelõ közül lehet választani, mint például: GNOME 1.4, KDE 2.2.2, "
-"WindowMaker 0.8"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Kiszolgálóprogramok"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Alakítsa gépét kiszolgálóvá néhány egérkattintással: web, email, tûzfal, "
-"útválasztó, fájlkiszolgáló, nyomtatókiszolgáló, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Játékok"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"A Mandrake Linux 8.2 a nyílt forráskódú játékok legjobbját nyújtja - "
-"ügyességi játékok, akció, kártyajátékok, sport, stratégia, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Szeretné megismerni a Linuxt egyszerûen, gyorsan és ingyenesen? "
-"MandrakeCampus nevû online oktatóközpontunkban ingyenes Linux-oktatást "
-"biztosítunk, ahol lehetõsége lesz a tudásának letesztelésére is."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Minõségi támogatás a Linux-közösségtõl és a MandrakeSofttól. Ha komolyabban "
-"ismeri a Linuxt, akkor szakértõként megoszthatja ismereteit másokkal a "
-"támogatási weblapunkon."
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Tanácsadóink rendelkezésre állnak az Ön összes IT-projektjéhez - "
-"testreszabott megoldásokat kínálva az Ön igényeinek elemzését követõen. A "
-"MandrakeSoft komoly tapasztalataival valódi alternatívát nyújt az Ön cége "
-"számára."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Linuxos megoldások teljes skálája, speciális termékajánlatok, valamint egyéb "
-"árucikkek elektronikus üzletünkben"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"A MandrakeSoft professzionális szolgáltatásaival illetve kereskedelmi "
-"ajánlataival kapcsolatos további információkért látogassa meg a következõ "
-"weblapot:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Csomagok telepítése..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nem tudom beolvasni a partíciós táblát, túl rossz állapotban van.\n"
-"Megpróbálom törölni a rossz partíciókat"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Hiba!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nem található a(z) \"%s\" képfájl."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Az automatikus telepítés beállításai"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Egy automatikus telepítõfloppy beállítása következik. Ez veszélyes lehet, "
-"ezért körültekintéssel használandó.\n"
-"\n"
-"Ennek segítségével újrajátszható az Ön által ezen gépen végrehajtott "
-"telepítés - közben bizonyos lépéseknél kérdéseket tesz majd fel a program "
-"egyes értékek módosítása érdekében.\n"
-"\n"
-"A maximális biztonság kedvéért a partícionálási és formázási mûveletek soha "
-"nem lesznek automatikusan végrehajtva, bármit is választott Ön ezen gép "
-"telepítése során.\n"
-"\n"
-"Kívánja folytatni?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Az automatikus lépések beállításai"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Adja meg mindegyik lépésnél, hogy újrajátszással vagy kézi vezérléssel "
-"történjen"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Üdvözöljük.\n"
-"\n"
-"Az automatikus telepítés paraméterei a bal oldalon érhetõk el"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulálunk!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"A floppy létrehozása sikeresen befejezõdött.\n"
-"A telepítés újralejátszása elvégezhetõ."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automatikus telepítés"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Elem hozzáadása"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Az utolsó elem eltávolítása"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup jelentés \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup szolgáltatás - jelentés\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup jelentés - részletek\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "elõrehaladás"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Rendszerfájlok mentése..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Fájlok merevlemezes mentése..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Felhasználói fájlok mentése..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Merevlemezes mentés folyamatban..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Egyéb fájlok mentése..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"fájlok küldése FTP-n: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP-kapcsolati probléma: A mentésfájlok FTP-n keresztül történõ küldése "
-"sikertelen.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Hiba levélküldés közben. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Fájlkijelölés"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-"Válassza ki a fájlokat illetve könyvtárakat, majd kattintson a \"Hozzáadás\" "
-"gombra"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Jelölje be azokat az opciókat, amelyekre szüksége van.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ezekkel a funkciókkal a /etc könyvtár összes fájlja elmenthetõ illetve "
-"visszatölthetõ.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Rendszerfájlok mentése ( /etc könyvtár )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Inkrementális mentés (a korábbi mentések nem lesznek felülírva)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "A kritikus fájlok kihagyása (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Ezzel az opcióval a /etc könyvtár bármely állapota\n"
-"visszatölthetõ lesz."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Jelölje ki az összes felhasználót, amelynek adatait menteni szeretné."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "A böngészõ-gyorstár kihagyása"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Inkrementális mentések (a korábbi mentések nem lesznek felülírva)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Kijelöltek eltávolítása"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Felhasználók"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Mentés FTP-kapcsolaton keresztül"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Adja meg a gépnevet vagy az IP-címet."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Adja meg a könyvtárt, amelybe a\n"
-" mentésfájlok kerüljenek az adott gépen."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Adja meg a felhasználói nevét"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Adja meg a jelszavát"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Emlékezzen a jelszóra"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP-kapcsolat"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Biztonságos kapcsolat"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Mentés CD-re/DVD-re"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Adja meg, mennyi hely van a CD-n"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Ha CD-RW lemezt használ, jelölje be az opciót"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Ha elõtte le kívánja törölni a CD-RW lemezt, jelölje be az opciót"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Ha telepítõs indítólemezt (CD) szeretne,\n"
-" jelölje be az opciót."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Adja meg a CD-író eszközazonosítóját,\n"
-" például: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Mentés szalagra"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Adja meg a mentéshez használandó eszköznevet"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Adja meg a DrakBackup program számára\n"
-" engedélyezett maximális méretet"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Adja meg a könyvtárt, ahova menteni kell:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Kvóta használata a mentésfájlokhoz."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Hálózat"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CD / DVD"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Merevlemez / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "óránként"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "naponta"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "hetente"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "havonta"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Szolgáltatás használata"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Adja meg a mentések közti \n"
-"idõintervallumot"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Adja meg a mentési\n"
-"médiát."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Merevlemez használata szolgáltatással"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTP használata szolgáltatással"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Gyõzõdjön meg arról, hogy a cron szolgáltatás a szolgáltatások közt van."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Levél küldése minden mentés után ide:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Mit"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Hova"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Mikor"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "További opciók"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "A DrakBackup beállítása"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Válassza ki, hogy hova szeretne menteni"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "merevlemezre"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "hálózaton keresztül"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Válassza ki, hogy mit szeretne menteni"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "A rendszer mentése"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "A felhasználók adatainak mentése"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Felhasználó kézi kiválasztása"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Mentési források: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Rendszerfájlok:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Felhasználói fájlok:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Egyéb fájlok:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Mentés merevlemezre a következõ helyre: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Mentés FTP-n keresztül a következõ gépre: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t felhasználónév: %s\n"
-"\t\t útvonal: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Beállítások:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tA rendszerfájlok kihagyása\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\ttar és bzip2 használata a mentésekhez\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\ttar és gzip használata a mentésekhez\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Szolgáltatások (%s):\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Merevlemez\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CD\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Hálózat FTP-n keresztül\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Hálózat SSH-n keresztül\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Nincs beállítás. Használja a varázslót vagy a Speciális opciót.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"A visszatöltendõ adatok listája:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"A sérült adatok listája:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "A következõ alkalommal szüntesse meg a kijelölést vagy törölje."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "A mentésfájlok sérültek"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Az összes kijelölt adat          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          vissza lett töltve ide: %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Beállítás visszatöltése       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Az egyéb fájlok is visszatölthetõk."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "A visszatöltendõ felhasználók (csak a legutóbbi dátumok lényegesek)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Az ez elõtti rendszerfájlok mentése:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "adja meg a visszatöltési dátumot"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Mentés merevlemezre"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Visszatöltés merevlemezrõl"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Adja meg a könyvtárt, ahol a mentések vannak"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Válasszon más médiát a visszatöltéshez"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Egyéb média"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Rendszer visszatöltése"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Felhasználók visszatöltése"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Egyéb adatok visszatöltése"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "válassza ki a visszatöltendõ útvonalat (a / helyett)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Új mentés készítése visszatöltés elõtt (csak inkrementális mentéshez)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Felhasználói könyvtárak törlése visszatöltés elõtt"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Az összes mentés visszatöltése"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Egyéni visszatöltés"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Segítség"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Elõzõ"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Mentés"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Mentésfájlok elkészítése"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Visszatöltés"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Következõ"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Készítsen mentést, mielõtt visszatöltést végezne\n"
-" (vagy pedig ellenõrizze, jól adta-e meg az útvonalat)."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Hiba a sendmail hívása közben.\n"
-"  A jelentés nem lett elküldve.\n"
-"  Ellenõrizze a sendmail beállítását."
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Telepítendõ csomagok listája"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Hiba a fájl FTP-vel való átvitele közben.\n"
-" Ellenõrizze az FTP-vel kapcsolatos beállításokat."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Válassza ki a visszatöltendõ adatokat..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Válasszon mentési médiát..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Válassza ki a mentendõ adatokat..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Beállítási fájl nem található. \n"
-"Használja a varázslót vagy a Speciális opciót."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Fejlesztés alatt..."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Rendszerfájlok mentése"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Felhasználói fájlok mentése"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Egyéb fájlok mentése"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Elõrehaladás"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "fájlok küldése FTP-n"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Fájlok küldése..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "A CD-re írandó adatok listája"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Adja meg a CD-író sebességét"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Adja meg a CD-író eszközazonosítóját (például: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ha telepítõs indítólemezt (CD) szeretne, jelölje be az opciót."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Mentés most a beállítások alapján"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Mentési beállítások megtekintése."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Beállítás a varázslóval"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Speciális beállítások"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Mentés most"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "DrakBackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"opciók leírása:\n"
-"\n"
-" Ebben a lépésben a következõket lehet módosítani:\n"
-"\n"
-" - Tömörítési mód:\n"
-"    \n"
-"      Ha bzip2 tömörítést választ, az adatok jobban lesznek\n"
-"      tömörítve, mint a gzip esetén (körülbelül 2-10 %-kal).\n"
-"      Alapértelmezésben nincs bejelölve ez az opció, mivel ez a\n"
-"      tömörítési mód több idõt igényel (körülbelül 1000 %-kal többet).\n"
-" \n"
-" - Frissítési mód:\n"
-"\n"
-"      Ez az opció frissíti a mentést, de nem igazán hasznos,\n"
-"      mivel frissítés elõtt ki kell tömöríteni a mentést.\n"
-"      \n"
-" - .backupignore mód:\n"
-"\n"
-"      Ahogyan a CVS esetén, a DrakBackup kihagy minden olyan\n"
-"      fájlt, ami a megfelelõ könyvtárban levõ .backupignore\n"
-"      fájlban hivatkozva van. Példa a .backupignore fájl\n"
-"      lehetséges tartalmára: \n"
-"         *.o\n"
-"         *~\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Bizonyos, a sendmail futása közben fellépõ hibáknak a\n"
-" postfix helytelen beállítása az oka. A kijavítás érdekében\n"
-" állítsa be a \"myhostname\"-et vagy a \"mydomain\"-t a\n"
-" /etc/postfix/main.cf fájlban.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"opciók leírása:\n"
-"\n"
-" - Rendszerfájlok mentése:\n"
-"       \n"
-"\tLehetõvé teszi a /etc könyvtár mentését. Ez a könyvtár\n"
-"\ta beállítási fájlokat tartalmazza. Visszatöltés közben\n"
-"\tlegyen óvatos, nehogy felülírja a következõ fájlokat:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Felhasználói fájlok mentése: \n"
-"\n"
-"\tLehetõvé teszi annak kiválasztását, hogy mely \n"
-"\tfelhasználók adatait kívánja menteni.\n"
-"\tHogy ne legyen feleslegesen használva a lemezhely, \n"
-"\tjavasolt a böngészõ gyorstárának fájljait kihagyni.\n"
-"\n"
-" - Egyéb fájlok mentése: \n"
-"\n"
-"\tLehetõvé teszi további mentendõ adatok kijelölését.\n"
-"\tEz a módszer egyelõre nem használható az inkrementális \n"
-"\tmentéssel együtt.\t\t\n"
-" \n"
-" - Inkrementális mentések:\n"
-"\n"
-"\tAz inkrementális mentés talán a legrugalmasabb \n"
-"\tmentési módszer. Ezen módszer használata esetén \n"
-"\taz elsõ mentés (amely még teljes mentés) után \n"
-"\tmár csak a változások kerülnek mentésre.\n"
-"\tVisszatöltésnél lehetõség van arra, hogy egy\n"
-"\tadott dátumra vonatkozóan legyenek visszatöltve\n"
-"\taz adatok.\n"
-"\tHa ez az opció nincs bejelölve, akkor az összes korábbi\n"
-"\tmentés le lesz törölve minden mentési folyamat elõtt.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"a visszatöltés leírása:\n"
-" \n"
-"Csak a legutóbbi dátum lesz felhasználva, mivel inkrementális \n"
-"mentés esetén az összes korábbi mentést vissza kell tölteni.\n"
-"\n"
-"Ha tehát nem akarja visszatölteni egy felhasználó adatait, akkor\n"
-"törölje az ahhoz tartozó összes opciót.\n"
-"\n"
-"Máskülönben csak egyet választhat ki közülük.\n"
-"\n"
-" - Inkrementális mentések:\n"
-"\n"
-"\tAz inkrementális mentés talán a legrugalmasabb \n"
-"\tmentési módszer. Ezen módszer használata esetén \n"
-"\taz elsõ mentés (amely még teljes mentés) után \n"
-"\tmár csak a változások kerülnek mentésre.\n"
-"\tVisszatöltésnél lehetõség van arra, hogy egy\n"
-"\tadott dátumra vonatkozóan legyenek visszatöltve\n"
-"\taz adatok.\n"
-"\tHa ez az opció nincs bejelölve, akkor az összes korábbi\n"
-"\tmentés le lesz törölve minden mentési folyamat elõtt.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft - DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Ez a program szabad szoftver; terjeszthetõ és/vagy módosítható\n"
-" a Free Software Foundation által publikált GNU General Public\n"
-" License 2. vagy annál újabb verziója alapján.\n"
-"\n"
-" A program annak reményében kerül terjesztésre, hogy hasznosnak\n"
-" bizonyul, de GARANCIA NÉLKÜL; még a PIACKÉPESSÉG illetve\n"
-" egy BIZONYOS CÉLRA VALÓ ALKALMASSÁG sincs garantálva. További\n"
-" részletek a GNU General Public License-ben.\n"
-"\n"
-" A programmal együtt Önnek kapnia kellett egy példányt a GNU General\n"
-" Public License-bõl; ha nem így történt, írjon a következõ címre:\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-" MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Leírás:\n"
-"\n"
-"  A DrakBackup program a rendszer mentésére használható.\n"
-"  Beállítható, mi legyen mentve:\n"
-"\t- rendszerfájlok\n"
-"\t- felhasználói fájlok\n"
-"\t- egyéb fájlok\n"
-"\tvagy a teljes rendszer és az egyéb adatok (például Windows partíciók)\n"
-"\n"
-"  A DrakBackup a következõ helyekre képes menteni:\n"
-"\t- merevlemez\n"
-"\t- NFS\n"
-"\t- CD (CD-RW), DVD (automatikus rendszerindítással,\n"
-"\t  helyreállítással és automatikus telepítéssel)\n"
-"\t- FTP\n"
-"\t- rsync\n"
-"\t- Webdav\n"
-"\t- szalag\n"
-"\n"
-"  A DrakBackup lehetõvé teszi a rendszernek egy kiválasztott\n"
-"  könyvtárba való visszatöltését.\n"
-"\n"
-"  Alapértelmezés szerint az összes mentés a /var/lib/drakbackup\n"
-"  könyvtárba kerül.\n"
-"\n"
-"  A beállításokat tartalmazó fájl:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Mentés visszatöltése:\n"
-"\n"
-"  Visszatöltés közben a DrakBackup eltávolítja az\n"
-"  eredeti könyvtárt, és ellenõrzi, hogy nincsenek-e\n"
-"  megsérülve a mentéseket tároló fájlok. Visszatöltés\n"
-"  elõtt javasolt még egy mentést készíteni.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"Az opciók leírása:\n"
-"\n"
-"Legyen óvatos, amikor FTP-s mentést használ - csak a már elkészült \n"
-"mentésfájlokat küldi a program a kiszolgálóra.\n"
-"Ez azt jelenti, hogy jelenleg el kell készíteni a mentést a \n"
-"merevlemezre, mielõtt a kiszolgálóra lenne küldve.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Mentés visszatöltésével kapcsolatos problémák:\n"
-"\n"
-"Visszatöltés közben a DrakBackup ellenõrzi az összes mentésfájlt,\n"
-"mielõtt visszatöltene azokból.\n"
-"Visszatöltés elõtt a program eltávolítja az eredeti könyvtárt,\n"
-"így elvesznek az ott levõ adatok.\n"
-"A mentésfájlokat kézzel ne módosítsa.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Leírás:\n"
-"\n"
-"  A DrakBackup program a rendszer mentésére használható.\n"
-"  Beállítható, mi legyen mentve:\n"
-"\t- rendszerfájlok\n"
-"\t- felhasználói fájlok\n"
-"\t- egyéb fájlok\n"
-"\tvagy a teljes rendszer és az egyéb adatok (például Windows partíciók)\n"
-"\n"
-"  A DrakBackup a következõ helyekre képes menteni:\n"
-"\t- merevlemez\n"
-"\t- NFS\n"
-"\t- CD (CD-RW), DVD (automatikus rendszerindítással,\n"
-"\t  helyreállítással és automatikus telepítéssel)\n"
-"\t- FTP\n"
-"\t- rsync\n"
-"\t- Webdav\n"
-"\t- szalag\n"
-"\n"
-"  A DrakBackup lehetõvé teszi a rendszernek egy kiválasztott\n"
-"  könyvtárba való visszatöltését.\n"
-"\n"
-"  Alapértelmezés szerint az összes mentés a /var/lib/drakbackup\n"
-"  könyvtárba kerül.\n"
-"\n"
-"  A beállításokat tartalmazó fájl:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Mentés visszatöltése:\n"
-"\n"
-"  Visszatöltés közben a DrakBackup eltávolítja az\n"
-"  eredeti könyvtárt, és ellenõrzi, hogy nincsenek-e\n"
-"  megsérülve a mentéseket tároló fájlok. Visszatöltés\n"
-"  elõtt javasolt még egy mentést készíteni.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "A(z) %s telepítése nem sikerült a következõ hiba miatt:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Telepített betûtípusok keresése"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Telepített betûtípusok kijelölésének törlése"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "az összes betûtípus vizsgálata"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "betûtípus nem található"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "kész"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "a csatlakoztatott partíciókon betûtípus nem található"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Jó betûtípusok ismételt kiválasztása"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "betûtípus nem található\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Betûtípusok keresése a telepítettek közt"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Betûtípus-másolás"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "TrueType betûtípusok telepítése"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "kérem, várjon: ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "TrueType-telepítés kész"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Betûtípus-konvertálás"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst készítése"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript-hivatkozás"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf betûtípusok konvertálása"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm betûtípusok konvertálása"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Átmeneti fájlok elhagyása"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "XFS újraindítása"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Betûtípus-fájlok elhagyása"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "XFS újraindítása"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Mielõtt bármilyen betûtípus telepítésébe kezdene, bizonyosodjon meg arról, "
-"hogy van joga azok telepítéséhez illetve használatához.\n"
-"\n"
-"-A betûtípusokat a szokott módon telepítheti. Bizonyos hibás betûtípusok "
-"lefagyaszthatják az X kiszolgálót."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Betûtípusok importálása"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Windowsos betûtípusok"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Betûtípusok eltávolítása"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Speciális opciók"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Betûtípus-lista"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Válassza ki, mely alkalmazások fogják használni a betûtípusokat:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "AbiWord"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Általános nyomtatók"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Válassza ki a betûtípus-fájlt vagy -könyvtárt, majd kattintson a \"Hozzáadás"
-"\" gombra"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Telepítési lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "kattintson ide, ha biztos benne"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "ide, ha nem"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Kijelölések megszüntetése"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Mindent kijelöl"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Lista eltávolítása"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Tesztelés"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Betûtípusok másolása a rendszerbe"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Betûtípusok telepítése és konvertálása"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Telepítés után"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "A rendszerben található betûtípusok eltávolítása"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Eltávolítás után"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetkapcsolat megosztása"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Az internetkapcsolat megosztása engedélyezve van"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Az internetkapcsolat megosztása már megtörtént.\n"
-"A megosztott kapcsolat használható.\n"
-"\n"
-"Mit szeretne tenni?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "Letiltás"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "Mégsem"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "Beállítás újból"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "A kiszolgálók letiltása..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Az internetkapcsolat-megosztás letiltása megtörtént."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Az internetkapcsolat megosztása nincs engedélyezve"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Az internetkapcsolat megosztása korábban már megtörtént.\n"
-"A megosztott kapcsolat használata nincs engedélyezve.\n"
-"\n"
-"Mit szeretne tenni?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "Engedélyezés"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "A kiszolgálók engedélyezése..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Az internetkapcsolat megosztása most már engedélyezett."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Az internetkapcsolat megosztásának beállítása következik.\n"
-"Ennek segítségével a helyi hálózat más gépei is elérhetik az internetet\n"
-"ezen a kapcsolaton keresztül.\n"
-"\n"
-"Megjegyzés: a helyi hálózat (LAN) használatához legalább egy hálózati\n"
-"csatolókártya szükséges."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s csatoló (a(z) %s modul felhasználásával)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "%s csatoló"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nem található hálózati csatolókártya a számítógépben."
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nem található Ethernet hálózati adapter a rendszerben. Futtassa a "
-"hardverkonfigurációs eszközt."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Hálózati csatolófelület"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Egyetlen beállított hálózati csatolókártya található a gépben:\n"
-"\n"
-"%s\n"
-"\n"
-"A helyi hálózat paramétereit ehhez a csatolóhoz fogom beállítani."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Válassza ki, hogy milyen kártyával csatlakozik a helyi hálózathoz."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Hálózati csatoló már be lett állítva"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Figyelmeztetés: a hálózati kártya (%s) már be van állítva.\n"
-"\n"
-"Szeretne automatikus újrakonfigurálást?\n"
-"\n"
-"Elvégezheti Ön is kézzel, de csak ha biztos abban, hogy mit tesz."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatikus újrakonfigurálás"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Jelenlegi csatolóbeállítás megjelenítése"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"\"%s\" jelenlegi beállítása:\n"
-"\n"
-"Hálózat: %s\n"
-"IP-cím: %s\n"
-"IP-tulajdonságok: %s\n"
-"Meghajtó: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Megtartható a jelenlegi beállítás, ekkor feltételezve lesz, hogy már "
-"megtörtént egy DHCP kiszolgáló beállítása. Ebben az esetben ellenõrizze, "
-"hogy helyesen lett-e meghatározva a helyi hálózathoz használt C osztályú "
-"tartomány. Nem történik újrakonfigurálás, és a DHCP kiszolgáló beállításai "
-"sem kerülnek módosításra.\n"
-"\n"
-"Újra is konfigurálható a csatoló illetve beállítható egy DHCP kiszolgáló.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C osztályú helyi hálózat"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "DHCP kiszolgáló IP-címe"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Csatoló és DHCP kiszolgáló újrakonfigurálása"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "A helyi hálózati cím nem \".0\"-ra végzõdik, kilépek."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Hálózati címhibát észleltem az aktuális konfigurációban: %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "A tûzfal beállításait sikerült felismerni."
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Figyelem! Egy már létezõ tûzfalbeállítást találtam. Néhány apróbb "
-"módosításra szükség lehet a telepítés elvégzése után."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Beállítás..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Beállítószkriptek, szoftvertelepítés, szerverek indítása..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "A(z) %s csomag telepítésénél hiba történt"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"A beállítás sikeresen befejezõdött.\n"
-"Az internetkapcsolat most már bármelyik, a helyi hálózaton található géppel "
-"megosztható az automatikus hálózati címkiosztás (DHCP) segítségével."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A megosztás már megtörtént, de a kapcsolat használata le van tiltva."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A megosztás már megtörtént, a kapcsolat használható."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Az internetkapcsolat megosztása még nem történt meg."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Az internetkapcsolat megosztásának beállítása"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Üdvözöljük az internetkapcsolat-megosztás beállítóprogramjában!\n"
-"\n"
-"%s\n"
-"\n"
-"Kattintson a Beállítás gombra a beállításvarázsló elindításához."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Hálózatbeállítás (%d csatoló)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profil törlése..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "A törölni kívánt profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Új profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"A létrehozandó profil neve (az új profil az aktuális pontos másolata lesz):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Gépnév: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet-hozzáférés"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Típus:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Átjáró (gateway):"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Csatoló:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Állapot:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Kis türelmet"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Az internet-hozzáférés beállítása..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "A helyi hálózat beállítása"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Meghajtó"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Csatoló"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Állapot"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "A helyi hálózat beállítása..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "A varázsló indításához kattintson ide ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Varázsló..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Alkalmazás"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Egy kis türelmet kérek, végrehajtom a kért módosításokat"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Csatlakozva"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nincs csatlakozva"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Csatlakozás..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "A kapcsolat bontása..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Figyelmeztetés: egy másik internetkapcsolat is létezik, esetleg a hálózatot "
-"használva"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Egyetlen csatoló sincs beállítva.\n"
-"A beállítás elvégzéséhez kattintson a \"Beállítás\" gombra."
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "A helyi hálózat beállítása"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s csatoló: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Rendszerindítási protokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Automatikus indítás"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-kliens"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktiválás most"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiválás most"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Ez a csatoló még nem lett beállítva.\n"
-"A beállítóvarázslót a fõablakban indíthatja el."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nincs beállítva egyetlen internetkapcsolat sem.\n"
-"Kapcsolat létrehozásához kattintson a \"Beállítás\" gombra."
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetkapcsolat beállítása"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetkapcsolat beállítása"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "A csatlakozás típusa: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Paraméterek"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Átjáró (gateway)"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet-kártya"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-kliens"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Biztonsági szint beállítása"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Vezérlõközpont"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Válassza ki a használni kívánt eszközt"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kábel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (sugárzás)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kábel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (kábel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kína (sugárzás)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japán (sugárzás)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japán (kábel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Kelet-Európa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Írország"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Nyugat-Európa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Ausztrália"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Új-Zéland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Dél-Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentína"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Adja meg\n"
-"a TV-normát és az országot"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-norma:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Terület:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "TV-csatornák keresése..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "TV-csatornák keresése"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "TV-kártya nem található."
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"TV-kártya nem található a gépben. Ellenõrizze, hogy valóban van-e a gépben "
-"Linux által támogatott TV-kártya, és hogy megfelelõen van-e beszerelve a "
-"gépbe.\n"
-"\n"
-"\n"
-"A Mandrake-féle hardver-adatbázis a következõ helyen található:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "használat: keyboarddrake [--expert] [billentyûzet]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Válasszon billentyûzetkiosztást."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Parancsértelmezõben a BackSpace billentyû \"Delete\"-et jelentsen?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cserélje ki a CD lemezt"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Helyezze be a telepítési CD-t a meghajtóba és nyomja meg az OK gombot.\n"
-"Ha nincs ilyen lemeze, akkor nyomja meg a \"Mégsem\" gombot a frissítés\n"
-"kihagyásához."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nem sikerült elindítani a frissítést!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "A módosítás megtörtént, de az érvénybe lépéséhez ki kell jelentkezni"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Csak a kijelölt napot jelenítse meg"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fájl/Ú_j"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fájl/_Megnyitás"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fájl/M_entés"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fájl/Mentés más_ként"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fájl/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Beállítások"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Beállítások/Próba"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Segítség"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Segítség/_Névjegy..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Felhasználó"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Üzenetek"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Rendszernapló"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake eszközök - magyarázat"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "keresés"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Naplófigyelõ"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Beállítások"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ezzel egyezõ"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "de ezzel nem egyezõ"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Válasszon egy fájlt"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Naptár"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "A fájl tartalma"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Email/SMS-figyelmeztetés"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "a fájl elemzése folyamatban: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Email/SMS-figyelmeztetés beállításai"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Üdvözöljük az email/SMS beállítóprogramban.\n"
-"\n"
-"A programmal beállítható a figyelmeztetések küldése.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "szolgáltatásbeállítás"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"A rendszer figyelmeztetést küld, ha a kijelölt szolgáltatások valamelyike "
-"nem fut"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "terhelésbeállítás"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "A rendszer figyelmeztetést küld, ha a terhelés ezen értéknél magasabb"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "figyelmeztetés beállítása"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "A figyelmeztetés módjának beállítása"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Mentés másként..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Adja meg az egér típusát."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nem találtam serial_usb-t\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuláljam a harmadik gombot?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "\"%s\" található itt: \"%s\", kívánja beállítani ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Válasszon egy lapolvasót"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ez a lapolvasó nincs támogatva: %s"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"A ScannerDrake nem találta meg az Ön \"%s\" lapolvasóját.\n"
-"Válassza ki, melyik eszközhöz csatlakozik a lapolvasó."
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "válassza ki az eszközt"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"A(z) \"%s\" lapolvasót a PrinterDrake programmal lehet beállítani.\n"
-"A PrinterDrake-et a Mandrake Vezérlõközpont \"Hardver\" részében indíthatja "
-"el."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Az Ön \"%s\" lapolvasója beállításra került.\n"
-"Dokumentumok beolvasására használhatja például az \"XSane\" programot, amely "
-"az alkalmazásmenü \"Multimédia/Grafika\" részében található."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "A tûzfal beállításai"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "A tûzfal beállításai"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Tûzfal-beállítások\n"
-"\n"
-"Már elvégezte a tûzfal beállítását. Kattintson a Beállítás\n"
-"gombra a tûzfal módosításához vagy megszüntetéséhez."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Tûzfal-beállítások\n"
-"\n"
-"Kattintson a Beállítás gombra a tûzfal beállításához"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Válasszon nyelvet"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Válasszon telepítési módot"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Merevlemez keresése"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Egér beállítása"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Billentyûzet kiválasztása"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Biztonság"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Fájlrendszerek beállítása"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partíciók formázása"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Csomagok kiválasztása"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Rendszer telepítése"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Felhasználó hozzáadása"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Hálózat beállítása"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Szolgáltatások beállítása"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Rendszerindító telepítése"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Indítólemez készítése"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Az X beállítása"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Rendszerfrissítések telepítése"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Kilépés a telepítõbõl"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Személyes tûzfal beállítása\n"
-"\n"
-"Ezzel egy személyes felhasználásra szánt mini tûzfalat lehet beállítani.\n"
-"Ha egy sokfelhasználós, vállalati szintû megoldást szeretne, szerezze\n"
-"be a speciális MandrakeSecurity Firewall disztribúciót."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"A következõ kérdésekre adott válaszok határozzák meg, hogy az internetrõl\n"
-"mely szolgáltatásokhoz lehet majd csatlakozni. Gondolja át a válaszokat,\n"
-"mert a hálózati biztonság elsõrendûen fontos.\n"
-"\n"
-"Ha nem használja a felsorolt szolgáltatások valamelyikét, ne engedélyezze\n"
-"a hozzáférést. A beállításokat késõbb ebbõl a programból bármikor meg\n"
-"lehet változtatni."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Használ olyan internetkiszolgálót (webszervert) ezen a gépen, amelyet\n"
-"elérhetõvé kell tenni az internetrõl? Ha csak a helyi géprõl kell\n"
-"hozzáférni a kiszolgálóhoz, akkor válaszoljon nemmel.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Használ valamilyen névkiszolgálót (DNS-szervert) ezen a gépen? Csak\n"
-"akkor válaszoljon igennel, ha a cím- és zónainformáció lekérdezését az\n"
-"egész internetrõl lehetõvé szeretné tenni.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Szeretné engedélyezni a bejövõ SSH (Secure Shell) kapcsolatokat? Ez\n"
-"egy telnet-szerû távoli bejelentkezési lehetõség. Ha még a telnetet\n"
-"használja, akkor mindenképpen váltson át az SSH használatára.\n"
-"A telnet-forgalom nincs titkosítva, ezért az abban átvitt jelszavak\n"
-"nincsenek védve illetéktelen elolvasás ellen. Az SSH egy biztonságosabb\n"
-"megoldás, ugyanis titkosítást használ."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Szeretné engedélyezni a bejövõ telnet-kapcsolatokat?\n"
-"A telnet-adatforgalom nem titkosított; biztonsági kockázatot jelent.\n"
-"Erõsen javasoljuk, hogy itt a \"Nem\"-et válassza, és SSH-t használjon\n"
-"telnet helyett.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Használ ezen a gépen olyan FTP-kiszolgálót, amelyet elérhetõvé kell tenni\n"
-"az internetrõl? Ha igen, akkor erõsen javasoljuk, hogy csak anonymous\n"
-"adatátvitelt engedélyezzen. Az FTP-vel továbbított jelszavak nem\n"
-"biztonságosak, mert az FTP nem használ semmilyen titkosítást\n"
-"adatátvitelnél.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Használ ezen a gépen e-mail-kiszolgálót (mail-szervert)? Ha az\n"
-"elektronikus üzeneteit ezen a gépen keresztül továbbítja,\n"
-"akkor feltehetõen igen. Máskülönben ne engedélyezze.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Használ ezen a gépen POP- vagy IMAP-kiszolgálót? Ezeken\n"
-"keresztül lehet a beérkezõ levelekhez hagyományos\n"
-"(nem Web-alapú) levelezõprogrammal hozzáférni.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Úgy tûnik, hogy a Linux kernel 2.2-es változatát használja. Ha az\n"
-"IP-címek kiosztásához helyi dinamikus címkiosztó szolgáltatást használ,\n"
-"akkor ezt ebben az esetben külön engedélyezni kell. Használ\n"
-"dinamikus címkiosztást?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Részt vesz a gép automatikus idõszinkronizációban?\n"
-"A közepes és nagyobb vállalatok így biztosítják, hogy a különféle\n"
-"gépek órái ne térjenek el egymástól (például a naplózásnál fontos).\n"
-"Ha nem tud ilyesmirõl, és nem nagy cégnél használja a gépet, akkor\n"
-"valószínûleg nemleges a válasz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"A beállítás befejezõdött. Elmenthetem a lemezre a módosításokat?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s megnyitása nem sikerült: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%s írásra való megnyitása nem sikerült: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nincs szükségem DHCP-re"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Szükségem van DHCP-re"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nincs szükségem NTP-re"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Szükségem van NTP-re"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Ne legyen mentés"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Mentés és kilépés"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Tûzfalbeállítási varázsló"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nem (blokkolás a tûzfal által)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Igen (átengedés a tûzfalon)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Kis türelmet kérek; a telepített csomagok ellenõrzése folyik"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Nem sikerült telepíteni a szükséges csomagokat: %s és Bastille.\n"
-" Próbálja meg kézzel telepíteni ezeket."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Hálózati számítógép (kliens)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-, SMB-, proxy- és SSH-kiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Iroda"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME-munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Segédprogramok a Palmhoz és a Visorhoz"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Tûzfal/útválasztó (router)"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "DNS- és NIS-kiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Irodai programok: szövegszerkesztõk (KWord, AbiWord), táblázatkezelõk "
-"(KSpread, Gnumeric), PDF-nézegetõk, ..."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Hangkezelõ eszközök: MP3- és MIDI-lejátszók, hangkeverõk, ..."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Könyvek és HOGYAN-ok a Linuxról és a szabad szoftverekrõl"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "IceWM, WindowMaker, Enlightenment, Fvwm, ..."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - videó"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "E-mail-eszközök, hírkezelés, web-eszközök, fájlátvitel és csevegés"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Adatbázis"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL vagy MySQL adatbázis-kiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Segédprogramok a számítógép beállításához"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - hang"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Segédprogramok"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentáció"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Parancssoros eszközök"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-mail-kiszolgáló, Inn hírkiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetes munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimédiás munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Beállítás"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "További grafikus környezetek (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"A K Desktop Environment - az alapvetõ grafikus környezet - az ahhoz tartozó "
-"eszközökkel együtt"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafikus környezet"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Segédprogramok CD-íráshoz"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Irodai munkaállomás"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Kiszolgáló"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "GNOME, IceWM, WindowMaker, Enlightenment, Fvwm, ..."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafikus programok (például a GIMP)"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C/C++ fejlesztõkönyvtárak, programok és include fájlok"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Kiszolgáló hálózati számítógépekhez"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-mail/csoportmunka/hírek"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Játékgép"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videólejátszók és -szerkesztõk"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Játékprogramok: lövöldözõs, táblás, stratégiai, ..."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Eszközök levelezéshez, hírkezeléshez (pine, mutt, tin, ...) és a Web "
-"böngészéséhez"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiválás, emulátorok, monitorozó programok"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Személyes pénzügyek"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafikus környezet felhasználóbarát alkalmazásokkal és segédprogramokkal"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Kliensprogramok különféle protokollokhoz (például: ssh)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-átjáró"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Hang/videólejátszó és -szerkesztõ programok"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Más grafikus környezetek"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Szövegszerkesztõk, parancsértelmezõk, fájlkezelõk, terminálprogramok"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programok a személyes pénzügyek kezeléséhez (például: GnuCash)"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Személyes információkezelés"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - CD-írás"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tudományos munkaállomás"
diff --git a/perl-install/share/po/i18n_compssUsers b/perl-install/share/po/i18n_compssUsers
deleted file mode 100644
index f6dc1ef7d..000000000
--- a/perl-install/share/po/i18n_compssUsers
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-sub get {
-    my ($meta_class) = @_;
-    my @l;
-
-    local *F;
-    open F, "../compssUsers$meta_class" or return; #die "can't open file ../compssUsers$meta_class";
-    foreach (<F>) {
-	/^\s*$/ || /^#/ and next;
-
-	if (/^(\S.*)/) {
-	    my ($icon, $path, $descr);
-	    /^(.*?)\s*\[icon=(.*?)\](.*)/  and $_ = "$1$3", $icon  = $2;
-	    /^(.*?)\s*\[path=(.*?)\](.*)/  and $_ = "$1$3", $path  = $2;
-	    /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2;
-	    push @l, $_, $descr, $path;
-	}
-    }
-    close F;
-
-    @l;
-}
-
-my @l = map { if_(/msgid "(.*)"/, $1) } cat_("DrakX.pot");
-my %l; @l{@l} = ();
-
-foreach (uniq(get(''), get('.desktop'))) {
-    if ($_) {
-        s/"/\"/g;
-        s/\n//g;
-	next if exists $l{$_};
-        print qq(
-#: ../../share/compssUsers:999
-msgid "$_"
-msgstr ""
-);
-    }
-}
diff --git a/perl-install/share/po/id.po b/perl-install/share/po/id.po
deleted file mode 100644
index bf75c2e01..000000000
--- a/perl-install/share/po/id.po
+++ /dev/null
@@ -1,13585 +0,0 @@
-# Instal Grafis Mandrake
-# Copyright (C) 1999 Mandrakesoft
-# Budi Rachmanto <rac@linux-mandrake.com>, 2001-2002
-# Linux Indonesia <http://www.linux.or.id>, 1999-2001
-# Mohammad DAMT <mdamt@cdl2000.com>, 1999-2001
-# Andy <chandy@indo.net.id>, 1999
-# Kelana <nk@telkom.net>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 0.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-05 21:55+09:00\n"
-"Last-Translator: Budi Rachmanto <rac@linux-mandrake.com>\n"
-"Language-Team: Bahasa Indonesia <id@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.6\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigurasikan semua head secara terpisah"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Gunakan ekstensi Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurasi kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfigurasi head majemuk"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sistem Anda mendukung konfigurasi head majemuk.\n"
-"Apa yg ingin Anda lakukan?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Kartu grafis"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Pilih kartu grafis"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Pilih server X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Pilih driver X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Driver X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Konfigurasi XFree mana yang Anda inginkan?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kartu Anda punya akselerasi hardware 3D, tapi hanya bisa digunakan pada "
-"XFree %s.\n"
-"Kartu Anda ini dapat dipakai pada XFree %s yg punya dukungan baik dalam 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s dengan akselerasi hardware 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,\n"
-"NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s dengan akselerasi hardware 3D PERCOBAAN"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,\n"
-"NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG.\n"
-"Kartu Anda ini dapat digunakan XFree %s yang lebih baik dalam 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalasi driver display)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Konfigurasi XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Pilih memori kartu grafis Anda"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Pilih opsi server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Pilih monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Ada dua parameter penting, yaitu laju refresh vertikal, yaitu laju\n"
-"kecepatan saat seluruh layar direfresh, dan yang lebih penting lagi adalah\n"
-"laju sync horisontal, yaitu laju kecepatan saat menanyangkan scan line.\n"
-"\n"
-"Anda TIDAK BOLEH mengisi parameter yang tidak dapat\n"
-"diimbangi dengan kemampuan monitor Anda, karena monitor\n"
-"Anda akan rusak berat.\n"
-"Kalau Anda ragu, gunakan setting yang umum."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Laju refresh horisontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Laju refresh vertikal"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor tidak dikonfigurasi"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Kartu grafis belum dikonfigurasi"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolusi belum ditentukan"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Anda ingin tes konfigurasi ini?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Awas: tes kartu grafis ini dapat membekukan komputer Anda"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Tes konfigurasi"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"coba ubah beberapa parameter"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ada error:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Tinggalkan dalam %d detik"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Setting sudah benar?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ada kesalahan, coba ubah beberapa parameter"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolusi"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Pilih resolusi dan kedalaman warna"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Kartu grafis: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Tambahan"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mode Ahli"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Tunjukan seluruhnya"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolusi"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Layout Keyboard: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Jenis Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Device Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Kartu grafis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikasi kartu grafis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memori grafis: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Pilihan kedalaman warna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Siap-siap konfigurasikan X "
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Apa yang akan Anda mau?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Ubah Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ubah kartu grafis"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Ubah Parameter Server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Ubah Resolusi"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Lihat info"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Tes lagi"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Keluar"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Lakukan perubahan?\n"
-"Konfigurasi sekarang adalah:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X saat startup"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Saya bisa bikin komputermu akan menjalankan X saat booting.\n"
-"Anda mau fasilitas ini ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Silakan masuk lagi ke %s untuk mengaktifkan perubahan"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Silakan log out dan tekan Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 warna (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ribu warna (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ribu warna (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 juta warna (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyar warna (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB atau lebih"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Standar, 640x480 pada 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "VGA Super, 800x600 pada 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Kompatibel, 1024x768 pada 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 pada 87 Hz interlaced, 800x600 pada 56 hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 pada 60 Hz, 640x480 pada 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 pada 60 Hz, 800x600 pada 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 pada 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency yang dapat mencapai 1280x1024 pada 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor yang dapat mencapai 1600x1200 pada 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor yang dapat mencapai 1600x1200 pada 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Sektor pertama di partisi boot"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Sektor pertama di drive (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalasi SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Bootloader akan diinstall di mana?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalasi LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO dengan menu teks"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO dengan menu grafis"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot dari DOS/windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Parameter Bootloader utama"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader yang hendak digunakan"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalasi Bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Device boot"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (tidak bisa dipakai pada BIOS kuno)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mode video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Delay sebelum boot ke image default"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Katasandi"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Katasandi (lagi)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Batasi parameter command line"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "batasi"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Hapus /tmp saat boot"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ukuram RAM yg tepat (saya nemu %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Buat multi profil"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Berikan jumlah RAM dalam satuan MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Pilihan ``Batasi parameter command line'' tidak ada gunanya tanpa katasandi"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Silakan ulangi"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Katasandi tidak sama"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Pesan Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Delay Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Timeout Kernel Boot"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Aktifkan boot dari CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Aktifkan boot dari OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Anda memutuskan instalasi pemuat boot di partisi.\n"
-"Berarti Anda sudah punya pemuat boot di harddisk yang Anda boot (mis: System "
-"Commander).\n"
-"\n"
-"Di drive mana Anda boot?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ini adalah entri yang lain lagi.\n"
-"Anda boleh tambahkan atau mengubah yang sudah ada."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Tambah"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Selesai"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifikasi"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Tipe entri mana yang hendak ditambahkan"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "OS Lain (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "OS Lain (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "OS Lain (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Sambung"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Tak aman"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Hapus entri"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Label tidak boleh kosong"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Anda harus tentukan image kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Anda harus tentukan partisi swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Label ini sudah dipakai"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Ketemu interface %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Anda punya lagi?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Punya %s interface?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Tidak"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ya"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Lihat info hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Menginstall driver untuk card %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Driver %s mana yang hendak saya coba?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kadangkala, driver %s butuh informasi tambahan agar dapat bekerja normal\n"
-"walaupun kadangkala juga ini tidak perlu. Nah, apakah Anda ingin untuk\n"
-"memberikan parameter tambahan tadi atau biarkan saja drivernya melakukan\n"
-"deteksi sendiri parameternya? Biasanya, autodetek akan membuat kompputer\n"
-"jadi hengki (baca: hang), tapi biasanya sih tak ngerusak hardwarenya."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Probe otomatis"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Tentukan opsi"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Anda dapat memberikan opsi terhadap modul %s.\n"
-"Ingat, semua alamat harus diisikan dengan awalan 0x misalnya '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Silakan beri parameter untuk modul %s ini.\n"
-"Parameter biasanya dalam format ``nama=nilai nama2=nilai2...''.\n"
-"Misalnya, ``io=0x300 irq=8''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Pilihan Modul:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Module %s gagal diload.\n"
-"Mau coba lagi dengan parameter yang lain?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "akses ke program X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "akses ke peralatan rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "izinkan \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "akses ke file administratif"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(sudah ditambahkan %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Katasandi ini terlalu sederhana"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Silakan tulis nama user"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Nama user hanya boleh terdiri dari huruf, angka, `-' dan `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "User ini sudah ada sebelumnya"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Tambah user"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Masukkan user\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Buat user"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nama Lengkap"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nama user"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Komputer Anda dapat diset agar secara otomatis login dg satu user.\n"
-"Anda ingin pakai feature ini?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Pilih user default:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Pilih manajer window yg akan dipakai:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Pilih bahasan yg akan dipakai."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Anda bisa pilih bahasa lain yang akan tersedia setelah install selesai"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Semua"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Izinkan semua user"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Customized"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Tiada pemakaian bersama"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s perlu diupgrade. Anda ingin instal?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Anda dapat mengekspor dg NFS atau Samba. Mana yg Anda ingin"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Paket wajib %s hilang"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Batal"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Luncurkan userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Sharing per-user menggunakan grup \"fileshare\". \n"
-"Anda dapat memakai userdrake utk menambah user di grup ini."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Selamat Datang di Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Lemah"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standar"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Kuat"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Lebih Kuat"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Pengecut"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Level ini harus hati-hati. Level ini akan membuat sistem Anda akan mudah\n"
-"digunakan, tapi sangat sensitif: mesin ini tidak boleh digunakan untuk\n"
-"mesin yang terhubung ke mesin lain atau ke ke Internet. Tidak akan ada\n"
-"akses katasandi."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "Katasandi akan diaktifkan, tapi mohon jangan disambungkan ke jaringan."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ini adalah sekuriti standar, dianjurkan untuk komputer yang akan\n"
-"terkoneksi ke Internet sebagai klien."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Sudah ada beberapa batasan, dan beberapa pengecekan otomatis berjalan tiap "
-"malam."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Dengan level sekuriti ini, sistem akan dapat digunakan sebagai server.\n"
-"Sekuriti kini cukup tinggi untuk dapat melayani koneksi banyak klien.\n"
-"Jika mesin Anda hanya berfungsi sebagai klien, pilihlah level lebih rendah."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Sama dengan level sebelumnya, tapi sistem sepenuhnya ditutup.\n"
-"Fitur sekuriti maksimum."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Pilih Tingkat Security"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Tingkat keamanan"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Gunakan libsafe utk server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Library penahan serangan string format dan overflow buffer"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Selamat datang di Sang Pemilih Sistem Operasi, %s!\n"
-"\n"
-"pilih sistem operasi pada daftar di atas atau tunggu %d detik untuk boot ke "
-"default.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Selamat datang di sang pemilih sistem operasi, GRUB"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Gunakan tombol %c dan %c untuk memilih entri yang disorot"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tekan enter untuk memboot OS yang terpilih, atau tekan 'e' untuk edit"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "perintah sebelum booting, atau 'c' untuk command line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Entri yang dipilih akan diboot secara otomatis dalam %d detik."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Waah /boot tak cukup spacenya nih"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Anda tak dapat menginstal bootloader pada partisi %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr " belom ada help-nya nih.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfigurasi Tipe Boot"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_File"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/File/_Keluar"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Kategori Monitor Gaya Baru"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor GayaBaru"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Biasa"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Biasa Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Jalankan aurora saat boot"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "mode Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "mode Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Manajer Boot: %s. Klik Configure untuk memanggil ahli setup."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurasikan"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Mode sistem"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Jalankan X-Window saat sistem dimulai"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Tidak, saya tak mau autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ya, saya mau autologin dg (user,desktop) ini"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "gagal baca file /etc/inittab nih: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d menit"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 menit"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d detik"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Gagal membuat screenshot sebelum buat partisi"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshot akan tersedia setelah instal di %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Perancis"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Republik Ceko"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Jerman"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Yunani"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norwegia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Swedia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Belanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Itali"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Amerika Serikat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Lebih dulu buatlah backup data Anda"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Baca dengan seksama!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jika Anda ingin pakai aboot, sisakan ruang (cukup 2048 sektor) di awal disk"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Ada Kesalahan"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Pilih aksi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Anda punya satu partisi FAT yang besar.\n"
-"(umumnya dipakai oleh wicrosoft Dos/mindows).\n"
-"Disarankan utk mengubah ukuran partisi ini\n"
-"(klik di situ, lalu pilih \"Ubah ukuran\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Silakan pilih partisi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "FS terjournal"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Kosong"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Lainnya"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipe filesystem:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Buat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gunakan ``%s'' saja"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Hapus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Gunakan ``unmount'' terlebih dahulu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Setelah mengganti tipe partisi %s, semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Pilih partisi"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Pilih partisi lain"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Keluar"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Ubah ke modus ahli"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ubah ke modus normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Kembali"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jalan terus?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Keluar tanpa menyimpan"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Keluar dari program tanpa menyimpan dalam tabel partisi?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ingin simpan modifikasi /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Alokasi otomatis"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Hapus semua"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Info hard drive"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Semua partisi primary telah digunakan"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Partisi tak dapat ditambah"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Untuk menambahkan partisi, hapus satu agar dapat membuat partisi extended"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Simpan tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Kembalikan tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Selamatkan tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Muat ulang tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Mount otomatis media lepas"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Pilih file"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup tabel partisi tidak memiliki ukuran yg sama\n"
-"Jalan terus?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Awas"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Masukkan disket ke drive\n"
-"semua data di disket ini akan hilang"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Sedang mencoba menyelamatkan tabel partisi"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Info detil"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Posisi mount"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Pilihan"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ubah ukuran"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Pindah"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Format"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Mount"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Tambahkan ke RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Tambahkan ke LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Unmount"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Hapus dari RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Hapus dari LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ganti RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "digunakan untuk loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Membuat partisi baru"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sektor awal: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Ukuran dalam MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipe filesystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Posisi mount: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Kesukaan: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Hapus file loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mengubah tipe partisi"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Filesystem apa yang Anda inginkan?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Pindah dari ext2 ke ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Device loopback %s akan di mount ke mana?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Mount device %s akan di mount ke mana?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Tak bisa unset mount point karena partisi ini sudah digunakan untuk\n"
-"loopback. Hapus dulu loopbacknya kalau mau begitu."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Sedang menghitung bound filesystem fat"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Sedang mengubah ukuran"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ukuran partisi ini tidak dapat diubah"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "semua data pada partisi ini sebaiknya dibackup dulu"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Sehabis meresize partisi %s, semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Pilih ukuran baru"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Ukuran baru dalam MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Disk mana yang hendak dipindah?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Sektor mana yang hendak dipindah"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Pindah"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Memindahkan partisi..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Pilih RAID yang ada untuk ditambahkan ke"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "baru"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Pilih LVM yang ada untuk ditambahkan ke"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "nama LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Partisi ini tak bisa dipakai sebagai loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nama file loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Berikan nama file"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "File sudah digunakan loopback yang lain, pilih yang lainnya dong"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "File sudah ada. Gunakan file ini ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opsi mount"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Macam-macam"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "device"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "level"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ukuran chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Hati-hati nih: operasi ini sangat berbuahayyya"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Tipe partisi apa yang hendak digunakan?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Maaf, Saya tidak mau membuat /boot di drive ini (silindernya > 1024).\n"
-"Kalau Anda pakai LILO dan tak jalan, atau Anda tak mau LILO dan tak mau /"
-"boot juga"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Anda menambahkan partisi root di luar silinder 1024,\n"
-"dan Anda tidak memiliki partisi /boot. Apabila Anda akan menggunakan lilo\n"
-"(boot manager), hati-hati dalam menambahkan partisi /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Anda memilih partisi RAID software sebagai root (/).\n"
-"Sekarang bootloader tak ada yang bisa handel tanpa partisi /boot.\n"
-"Jadi hati-hati dalam menambahkan partisi /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabel partisi pada drive %s akan ditulis ke disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Anda harus reboot agar perubahan tabel partisi dapat berlaku"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Sehabis memformat partisi %s semua data pada partisi ini akan hilang"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Sedang memformat"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Sekarang sedang memformat file loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Melakukan format partisi %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sembunyikan file"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Pindah file ke partisi baru"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktori %s telah berisi data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Pindah file ke partisi baru"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Salin %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Hapus %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partisi %s sekarang jadi %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Device: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS letter: %s (hanya tebakan)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipe: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nama: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Mulai: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Ukuran: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d sampai %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Telah diformat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Belum diformat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Telah di-mount\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"File loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partisi di-boot secara default\n"
-"    (untuk MS-DOS boot, bukan untuk lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ukuran chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disk RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nama file loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mungkin partisi ini adalah \n"
-"partisi driver, jadi sebaiknya\n"
-"jangan diapa-apain deh.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"partisi ini adalah partisi bootstrap\n"
-"yang khusus digunakan \n"
-"oleh sistem dual boot.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ukuran: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ukuran: %s silinber, %s head, %s sektor\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Disk LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisi tipe: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "pada bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Pilihan: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Kunci sandi sistem file"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Pilih kunci sandi sistem file Anda"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Katasandi ini terlalu mudah (harus paling tidak %d karakter)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Kunci sandi tak cocok"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Kunci sandi"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Kunci sandi (lagi)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Ubah tipe"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klik salah satu media"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Cari Server"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s proses format dari %s gagal"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "tidak bisa melakukan format %s dengan tipe %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "penyambungan partisi %s ke direktori %s gagal"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck gagal dg kode keluar %d / sinyal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error melepas mount %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "mudah"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "dengan /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS tak dapat dipakai utk partisi berukuran di bawah 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS tak dapat dipakai utk partisi berukuran di bawah 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Mount point harus diawali dengan /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Partisi dengan titik mount %s sudah ada\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Anda tak dapat menggunakan LVM Logical Volume untuk titik mount %s."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Direktori ini harus ada di filesystem root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "Anda perlu filesystem yg benar (ext2, reiserfs) utk titik mount ini\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Anda tak dapat menggunakan sistem file bersandi utk mount point %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Tak cukup ruangan untuk alokasi otomatis"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Tiada yang dikerjakan"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "error membuka file %s untuk ditulisi: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Error - tidak ada device yang valid untuk membuat filesystem baru. Periksa "
-"kembali hardware untuk mencari penyebabnya"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Anda tak punya partisi!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux adalah sistem multiuser, artinya tiap user bisa punya kesukaan,\n"
-"file dll sendiri. Anda bisa membaca ``User Guide'' utk belajar lebih dalam.\n"
-"Tapi tak seperti \"root\", sang administrator, user di sini tak berhak\n"
-"mengubah apapun kecuali konfigurasi dan file mereka sendiri. Anda harus\n"
-"membuat setidaknya satu user reguler utk Anda sendiri. Account ini Anda\n"
-"pakai utk rutinitas. Meski Anda dapat login sbg \"root\" tiap hari, tapi\n"
-"itu amat berbahaya! Kesalahan terkecil dapat menyebabkan sistem Anda tak\n"
-"bekerja selamanya. Meski Anda melakukan kesalahan serius sbg user normal,\n"
-"Anda hanya akan kehilangan sebagian informasi, tidak seluruh sistem.\n"
-"\n"
-"Pertama, Anda harus mengisi nama. Ini tidak wajib, tentu saja - Anda dapat\n"
-"mengisinya sesuka Anda. DrakX akan mengambil kata pertama yg anda masukkan\n"
-"di kotak sbg \"Nama user\". Ini adalah nama user yg dipakai utk login ke\n"
-"sistem. Anda bisa mengubahnya. Lalu Anda harus mengisi katasandi. Katasandi\n"
-"user non-privileged (reguler) tak sepenting katasandi \"root\" dari segi\n"
-"keamanan, tapi tak ada alasan utk mengabaikannya - file Anda bisa beresiko.\n"
-"\n"
-"Klik \"Buat user\", selanjutnya Anda dapat menambahkan user sebanyak Anda\n"
-"mau. Misalnya, tambahkan user utk teman, ayah, atau saudara Anda. Bila Anda\n"
-"selesai menambahkan semua user, pilih \"Selesai\".\n"
-"\n"
-"Klik \"Tambahan\" memungkinkan Anda mengubah \"shell\" standar utk user\n"
-"terkait (standar: bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yang terdaftar di atas adalah partisi Linux terdeteksi pd hard drive Anda.\n"
-"Anda dapat memakai pilihan yg dibuat oleh wizard, itu baik utk instalasi\n"
-"umum. Bila Anda mengubah pilihan, setidaknya Anda perlu mendefinisikan\n"
-"partisi root (\"/\"). Jangan pilih partisi yg terlalu kecil agar dapat\n"
-"menginstal software dg leluasa. Bila Anda ingin menyimpan data pada partisi\n"
-"lain, Anda perlu membuat partisi \"/home\" (hanya mungkin jika punya lebih\n"
-"dari satu partisi Linux.)\n"
-"\n"
-"Tiap partisi terdaftar sbb: \"Nama\", \"Kapasitas\".\n"
-"\n"
-"\"Nama\" berstruktur: \"tipe hard drive\", \"nomor hard drive\",\n"
-"\"nomor partisi\" (misalnya \"hda1\").\n"
-"\n"
-"\"Tipe hard drive\" adalah \"hd\" utk drive IDE dan \"sd\" utk drive SCSI.\n"
-"\n"
-"\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Bila "
-"berupa IDE, maka:\n"
-"\n"
-"   *\"a\" berarti \"hard drive master pada kontroller IDE primer\",\n"
-"\n"
-"   *\"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n"
-"\n"
-"   *\"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n"
-"\n"
-"   *\"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n"
-"\n"
-"\n"
-"Pada drive SCSI, \"a\" berarti \"hard drive utama, \"b\" berarti \"hard "
-"drive kedua\", dsb..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Instalasi Mandrake Linux terdiri atas bbrp CDROM. DrakX tahu jika paket\n"
-"terpilih berada di CDROM lain dan akan mengeluarkan CD yg ada utk kemudian\n"
-"meminta Anda memasukkan CD yg diperlukan."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Kini kita tentukan program yg akan diinstal di sistem Anda. Ribuan paket\n"
-"tersedia di Mandrake Linux, Anda tak perlu mengenal semuanya.\n"
-"\n"
-"Jika Anda menjalankan instalasi standar dari CDROM, Anda akan diminta\n"
-"menentukan CD yg Anda punya (hanya pd mode Ahli). Cek label CD dan\n"
-"tandai kotak yg sesuai dg CD yg Anda miliki utk instalasi. Klik \"OK\" jika\n"
-"Anda siap melanjutkan.\n"
-"\n"
-"Paket disortir menurut grup sesuai kegunaan mesin Anda.\n"
-"Grup diurutkan ke dalam empat bagian:\n"
-"\n"
-" * \"Workstation\": jika Anda ingin menggunakan mesin Anda sbg workstation, "
-"pilih\n"
-"satu/lebih grup yg sesuai.\n"
-"\n"
-" * \"Development\": jika mesin akan digunakan utk pemrograman, pilih grup\n"
-"yg diinginkan.\n"
-"\n"
-" * \"Server\": jika mesin diinginkan menjadi server, Anda dapat\n"
-"memilih servis paling umum yg akan diinstal.\n"
-"\n"
-" * \"Lingkungan Grafis\": akhirnya, di sini Anda memilih lingkungan\n"
-"grafis. Minimal Anda harus pilih satu jika ingin punya workstation grafis!\n"
-"\n"
-"Untuk melihat penjelasan singkat, gerakkan kursor mouse ke atas nama grup.\n"
-"Jika Anda tak memilih satu grup pun saat melakukan instalasi normal (bukan\n"
-"upgrade) popup dialog akan muncul dengan menu instalasi minimal:\n"
-"\n"
-" * \"Dengan X\" Instal paket minimal yang memungkinkan kerja dengan desktop\n"
-"grafis;\n"
-"\n"
-" * \"Dengan dokumentasi dasar\" Instal sistem plus peralatan dasar dan\n"
-"dokumentasinya. Instalasi ini cocok untuk setup server.\n"
-"\n"
-" * \"Instalasi minimal sungguh\" Hanya instal kebutuhan minimum sistem,\n"
-"dalam baris perintah saja. Butuh sekitar 65Mb.\n"
-"\n"
-"Anda dapat memilih \"Pilih paket sendiri\", berguna jika Anda tahu baik\n"
-"paket yg disediakan atau ingin mengontrol instalasi secara total.\n"
-"\n"
-"Jika Anda memulai instalasi dg mode \"Upgrade\", Anda dapat melepas seleksi\n"
-"semua group utk menghindari instalasi paket baru. Ini berguna utk reparasi\n"
-"atau update sistem yg ada."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Akhirnya, tergantung apakah Anda memilih paket sendiri atau tidak, Anda\n"
-"akan diberi pohon berisi paket terkelompok dg grup/subgrup. Sambil meneliti\n"
-"pohon, Anda dapat memilih semua grup, subgrup, atau paket tersendiri.\n"
-"\n"
-"Tiap kali Anda memilih paket di pohon, penjelasan muncul di sisi kanan.\n"
-"Bila seleksi Anda selesai, klik tombol \"Instal\" utk memulai instalasi.\n"
-"Tergantung kecepatan hardware dan jumlah paket yg diinstal, mungkin\n"
-"dibutuhkan bbrp saat utk instalasi. Perkiraan waktu instalasi ditampilkan\n"
-"di layar utk membantu Anda memperkirakan waktu menikmati secangkir kopi.\n"
-"\n"
-"!! Jika paket server terpilih dg sengaja atau karena merupakan bagian suatu\n"
-"grup besar, akan ada pertanyaan konfirmasi instalasi paket tersebut. Pada\n"
-"Mandrake Linux, secara default semua server terinstal dijalankan saat boot.\n"
-"Meski aman saat distribusi diluncurkan, ada kemungkinan lubang keamanan\n"
-"ditemukan setelah versi Mandrake Linux ini rampung. Jika Anda tak tahu apa\n"
-"yg dilakukan oleh suatu servis atau mengapa ia diinstal, klik \"Tidak\".\n"
-"Jika Anda menekan \"Ya\" servis terdaftar akan diinstal dan secara standar\n"
-"akan dijalankan secara otomatis. !!\n"
-"\n"
-"Opsi \"Ketergantungan otomatis\" mematikan dialog yg muncul tiap kali\n"
-"instalator memilih suatu paket scr otomatis. Ini terjadi karena\n"
-"ketergantungan harus dipenuhi dg paket lain agar instalasi sukses.\n"
-"\n"
-"Ikon disket di dasar list memungkinkan pemuatan daftar paket ter-instal pd\n"
-"instalasi sebelumnya. Jika diklik, Anda akan diminta memasukkan disket yg\n"
-"dibuat pd akhir instalasi yg lalu. Lihat tip kedua di step terakhir utk\n"
-"membuat floppy tersebut."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Kini koneksi internet/jaringan akan disetup. Jika Anda ingin menyambung\n"
-"komputer Anda dg Internet atau jaringan lokal, klik \"OK\". Deteksi\n"
-"otomatis perangkat jaringan dan modem akan diluncurkan. Jika deteksi gagal,\n"
-"selanjutnya jangan tandai kotak \"Pakai deteksi otomatis\". Anda juga dapat\n"
-"memilih tak mengkonfigurasikan jaringan, atau mengerjakannya nanti; jika\n"
-"demikian, klik tombol \"Batal\".\n"
-"\n"
-"Koneksi yg tersedia adalah: modem tradisional/ISDN, hubungan ADSL, modem\n"
-"kabel, dan hubungan LAN (Ethernet).\n"
-"\n"
-"Di sini konfigurasi tak dirinci. Pastikan Anda punya semua parameter dari\n"
-"ISP atau administrator sistem.\n"
-"\n"
-"Penjelasan dapat dilihat di manual hubungan Internet. Atau tunggulah hingga\n"
-"sistem terinstal dan pakailah program yg dijelaskan utk setup koneksi.\n"
-"\n"
-"Jika Anda ingin mengkonfigurasi network pasca instalasi atau bila instalasi\n"
-"jaringan selesai, klik \"Batal\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Kini Anda boleh pilih servis mana yang dijalankan saat boot.\n"
-"\n"
-"Di sini ditampilkan semua servis yg tersedia di instalasi ini. Periksa dg\n"
-"baik dan jangan tandai servis yg tak selalu diperlukan saat boot.\n"
-"\n"
-"Ada penjelasan singkat bila suatu servis dipilih. Tapi jika Anda tak yakin\n"
-"kegunaan servis tsb., lebih aman tak usah diusik.\n"
-"\n"
-"Pada tahap ini, hati-hati jika Anda bermaksud menjadikan mesin Anda sebuah\n"
-"server: Anda mungkin tak ingin menjalankan servis yg tak diperlukan. Ingat,\n"
-"bbrp servis bisa berbahaya jika dijalankan. Secara umum, pilihlah hanya\n"
-"servis yang benar-benar Anda perlukan."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux mengatur waktu dlm GMT (Greenwich Mean Time) dan menerjemahkannya\n"
-"ke waktu lokal tergantung zona waktu yang Anda pilih. Dapat di-nonaktifkan\n"
-"dengan melepas tanda \"Jam hardware diset ke GMT\" sehingga jam hardware\n"
-"sama dengan jam sistem. Berguna bila mesin didiami OS lain seperti Mindows.\n"
-"\n"
-"Opsi \"Sinkronisasi waktu otomatis\" akan otomatis mengatur jam dengan\n"
-"menghubungi server waktu remote di internet. Pilihlah server terdekat saat\n"
-"daftar muncul. Tentu saja Anda harus punya koneksi internet agar fitur ini\n"
-"berfungsi. Server waktu akan diinstalkan di mesin Anda dan dapat dipakai\n"
-"oleh mesin lain di jaringan lokal Anda."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (Sistem Window X) adalah jantung antarmuka grafis GNU/Linux tempat sandar\n"
-"semua lingkungan grafis (KDE, Gnome, AfterStep, WindowMaker...) Mandrake\n"
-"Linux. Di sini DrakX akan mencoba mengkonfigurasi X secara otomatis.\n"
-"\n"
-"Jarang sekali gagal, kecuali jika hardware amat kuno (atau amat baru). Jika\n"
-"sukses, X otomatis dijalankan dg resolusi terbaik sesuai ukuran monitor.\n"
-"Window akan muncul dan bertanya apakah Anda dapat melihatnya.\n"
-"\n"
-"Jika Anda melakukan instal \"Ahli\", Anda akan memasuki wizard konfigurasi\n"
-"X. Lihat bab yg bersangkutan di manual utk info lanjut ttg wizard ini.\n"
-"\n"
-"Jika Anda dapat melihat pesan dan menjawab \"Ya\", DrakX akan maju ke tahap\n"
-"berikut. Jika Anda tak dapat melihat pesan, berarti konfigurasi salah dan\n"
-"10 detik kemudian tes otomatis berakhir dg kembali ke layar semula."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Pertama kali mencoba konfigurasi X, Anda mungkin tak puas dg tampilannya\n"
-"(layar terlalu kecil, tergeser ke kiri/kanan...). Jadi walau X jalan dengan\n"
-"baik, DrakX akan bertanya apakah konfigurasi ini memuaskan. Mode valid yang\n"
-"ditemukan juga akan disajikan untuk dipilih.\n"
-"\n"
-"Jika Anda tetap gagal menjalankan X, pilih \"Ubah kartu grafis\", lalu\n"
-"\"Kartu tak terdaftar\", dan saat ditanya server apa yg Anda inginkan,\n"
-"pilih \"FBDev\". Ini adalah opsi failsafe yg jalan di kartu grafis modern.\n"
-"Lalu pilih \"Tes lagi\" agar yakin."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Akhirnya, Anda akan ditanya apakah Anda ingin punya antarmuka grafis saat\n"
-"boot. Pertanyaan ini diajukan meski Anda memilih tidak mentes konfigurasi.\n"
-"Jelas, Anda ingin menjawab \"Tidak\" jika mesin Anda dijadikan server, atau\n"
-"jika Anda gagal mengkonfigurasi display."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"CDROM Mandrake Linux punya mode pertolongan built-in, yg bisa diakses dg\n"
-"mem-boot dari CDROM, tekan >>F1<< dan ketik >>rescue<< di prompt. Tapi jika\n"
-"komputer Anda tak dapat mem-boot dari CDROM, kembalilah ke tahap ini untuk\n"
-"pertolongan dalam setidaknya 2 situasi:\n"
-"\n"
-" * saat instalasi bootloader, DrakX akan menulis ulang sektor boot (MBR)\n"
-"disk utama Anda (kecuali jika Anda memakai manajer boot lain) sehingga Anda\n"
-"dapat menjalankan GNU/Linux atau Mindows (jika Anda punya Mindows di sistem\n"
-"Anda). Jika Anda menginstal Mindows lagi, proses instal micro$oft akan\n"
-"menulis ulang sektor boot, dan Anda takkan dapat menjalankan GNU/Linux!\n"
-"\n"
-" * jika ada masalah sehingga Anda tak dapat menjalankan GNU/Linux dari hard\n"
-"disk, disket ini adalah jalan satu-satunya utk menjalankan GNU/Linux. Ini\n"
-"berisi sejumlah alat utk mereparasi sistem yg rusak karena kegagalan power,\n"
-"salah ketik, alpa kata sandi, dan lain-lain.\n"
-"\n"
-"Bila step ini diklik, Anda akan diminta memasukkan disket ke drive. Disket\n"
-"harus kosong / berisi data yg tak Anda perlukan. Tak perlu diformat sebab\n"
-"DrakX akan menulis ulang seluruh disket."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Pada tahap ini, pilihlah tempat Mandrake Linux akan diinstal di harddisk.\n"
-"Bila harddisk masih kosong / ada sistem operasi lain yg mengisi seluruhnya,\n"
-"Anda perlu melakukan proses partisi. Pada dasarnya, proses partisi harddisk\n"
-"adalah membagi harddisk, dg membuat ruang kosong utk instalasi sistem\n"
-"Mandrake Linux.\n"
-"\n"
-"Karena bersifat satu arah (tak dapat dikembalikan ke keadaan awal), proses\n"
-"partisi dapat membuat stres dan pusing kepala, apalagi jika Anda belum\n"
-"berpengalaman. Untungnya, ada wizard yang mempermudah proses ini.\n"
-"Sebelum mulai, baca dan pelajari dulu buku manual dengan baik.\n"
-"\n"
-"Jika Anda menggunakan mode Ahli, Anda akan masuk DiskDrake, alat partisi\n"
-"Mandrake Linux, yg memungkinkan fine-tuning partisi Anda. Lihat manual bab\n"
-"DiskDrake. Dari antarmuka instalasi, Anda dapat menggunakan wizard seperti\n"
-"dijelaskan di sini dg meng-klik tombol \"Wizard\".\n"
-"\n"
-"Bila partisi-partisi tsb sudah ada sebelumnya (hasil instal sebelumnya\n"
-"atau hasil program partisi lain), pilihlah partisi tsb utk tempat instalasi\n"
-"sistem Linux Anda.\n"
-"\n"
-"Jika belum ada partisi, Anda perlu membuatnya dengan program wizard. Ada\n"
-"bbrp opsi tergantung konfigurasi harddisk Anda:\n"
-"\n"
-" * \"Pakai ruang kosong\": opsi ini akan secara otomatis mem-partisi drive\n"
-"kosong Anda. Anda takkan ditanya lebih jauh.\n"
-"\n"
-" * \"Pakai partisi yang sudah ada\": wizard mendeteksi satu/lebih partisi\n"
-"Linux di hard drive Anda. Jika Anda ingin menggunakannya, pilih opsi ini.\n"
-"\n"
-" * \"Pakai ruang kosong pada partisi Mindows\": jika wicrosoft mindows\n"
-"terinstal dan menghabiskan seluruh kapasitas disk, Anda perlu membuat ruang\n"
-"kosong untuk data Linux dg menghapus partisi dan data wicrosoft mindows\n"
-"(lihat solusi \"Hapus seluruh disk\" atau mode \"Ahli\") atau dapat juga\n"
-"mengubah ukuran partisi wicrosoft mindows. Cara ini dapat digunakan tanpa\n"
-"harus kehilangan data. Cara ini disarankan bila Anda ingin memakai Linux\n"
-"Mandrake dan wicrosoft mindows dlm satu komputer.\n"
-"\n"
-"   Sebelum memilih cara ini, mohon maklum bahwa partisi wicrosoft mindows\n"
-"sekarang berukuran lebih kecil. Ruang dlm wicrosoft mindows utk menyimpan\n"
-"data / menginstall software baru menjadi kecil.\n"
-"\n"
-" * \"Hapus seluruh disk\": jika Anda ingin hapus semua data dan partisi di\n"
-"harddisk Anda utk kemudian digantikan semuanya oleh sistem Mandrake Linux,\n"
-"pilih opsi ini. Hati-hati, Anda tak dapat kembali setelah konfirmasi.\n"
-"\n"
-"   !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n"
-"\n"
-" * \"Buang Mindows\": ini akan menghapus semua di drive dan mulai proses\n"
-"partisi dari nol. Semua data di disk akan hilang.\n"
-"\n"
-"   !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n"
-"\n"
-" * \"Mode ahli\": pilih jika Anda ingin secara manual mempartisi harddisk.\n"
-"Awas! Cara ini amat perkasa tapi juga berbahaya. Anda bisa kehilangan data\n"
-"dg mudah. Jangan pilih kecuali Anda tahu yg Anda lakukan."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Oke, instalasi kini selesai dan sistem GNU/Linux Anda siap dipakai. Klik\n"
-"\"OK\" utk reboot sistem. Anda dapat menjalankan GNU/Linux atau Windows,\n"
-"tergantung pilihan Anda (jika Anda memakai dual-boot).\n"
-"\n"
-"Tombol \"Tambahan\" (hanya di mode Ahli) menampilkan 2 tombol utk:\n"
-"\n"
-" * \"Membuat floppy instalasi otomatis\": utk membuat disket instalasi yang\n"
-"akan secara otomatis melakukan instalasi tanpa bantuan operator, sama dg\n"
-"instalasi yang baru Anda konfigurasikan.\n"
-"\n"
-"   Ada dua opsi setelah tombol di-klik:\n"
-"\n"
-"    * \"Ulang\". Instalasi semi-otomatis, hanya proses partisi yang tetap\n"
-"interaktif.\n"
-"\n"
-"    * \"Otomatis\". Instalasi otomatis penuh: harddisk ditulis ulang\n"
-"seluruhnya, semua data hilang.\n"
-"\n"
-"   Fitur ini amat praktis utk instalasi banyak mesin dg spesifikasi sama.\n"
-"Lihat pasal Auto install di website kami.\n"
-"\n"
-" * \"Menyimpan pilihan paket\"(*): simpan pilihan paket seperti yang dibuat\n"
-"sebelumnya. Lalu saat mengerjakan instalasi lain, masukkan floppy ke driver\n"
-"dan arahkan instalasi ke layar pertolongan dg menekan kunci [F1] lalu ketik\n"
-">>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Anda perlu floppy berformat FAT (utk membuatnya di GNU/Linux, jalankan\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Tiap-tiap partisi yang telah dibuat harus diformat agar dapat digunakan\n"
-"(format berarti membuat filesystem).\n"
-"\n"
-"Sekarang Anda bisa mem-format ulang partisi yg ada utk dihapus datanya.\n"
-"BIla ini hendak Anda lakukan, pilihlah partisi yang hendak diformat.\n"
-"\n"
-"Ingat, Anda tak perlu melakukan format ulang pada semua partisi yg ada.\n"
-"Anda perlu mem-format ulang partisi yg akan diisi sistem operasi (misalnya\n"
-"pada partisi \"/\", \"./usr\", atau \"/var\"), tapi tak perlu melakukannya\n"
-"pada partisi berisi data yang masih akan digunakan (misalnya \"/home\").\n"
-"\n"
-"Hati-hati dalam memilih partisi. Setelah diformat semua data akan hilang\n"
-"dan tak dapat dikembalikan ke kondisi semula.\n"
-"\n"
-"Klik \"OK\" bila Anda siap mem-format partisi.\n"
-"\n"
-"Klik \"Batal\" jika Anda ingin memilih partisi lain utk instalasi sistem\n"
-"operasi Mandrake Linux baru Anda.\n"
-"\n"
-"Klik \"Tambahan\" jika ingin memilih partisi yg akan dicek blok rusaknya\n"
-"di disk."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Sistem operasi Mandrake Linux baru Anda sedang di-instal.\n"
-"Proses ini memakan waktu beberapa menit/jam, tergantung ukuran yang\n"
-"Anda install dan kecepatan komputer Anda.\n"
-"\n"
-"Sabar..."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Saat Mandrake Linux diinstal, nampaknya beberapa paket telah diupdate sejak\n"
-"rilis awal. Beberapa kutu mungkin telah diperbaiki, dan masalah keamanan\n"
-"dipecahkan. Untuk memanfaatkan update ini Anda dianjurkan men-download dari\n"
-"internet. Pilih \"Ya\" jika ada koneksi internet aktif, atau \"Tidak\" jika\n"
-"ingin mengupdate paket lain waktu.\n"
-"\n"
-"Jika \"Ya\", daftar sumber download update akan ditampilkan. Pilih yang\n"
-"dekat. Lalu muncul pohon seleksi paket: lihat lagi pilihan Anda, tekan\n"
-"\"Instal\" untuk mengambil/nstal paket atau \"Batal\" jika tak jadi."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Sebelum melanjutkan Anda bacalah lisensi dg baik . Itu mencakup seluruh\n"
-"distribusi Mandrake Linux, dan jika Anda tak setuju dg semua pasal di\n"
-"dalamnya, klik \"Tolak\" agar instalasi terhenti. Untuk melanjutkan, klik\n"
-"\"Terima\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Kini waktunya memilih tingkat keamanan mesin. Makin terbuka suatu mesin,\n"
-"dan makin penting data di dalamnya, tingkat keamanannya harus makin tinggi.\n"
-"Tapi, level keamanan yang tinggi umumnya mengorbankan kemudahan pemakaian.\n"
-"Info ttg level keamanan dapat dilihat bab MSEC pada ``Manual Referensi''.\n"
-"\n"
-"Jika Anda tak tahu apa yg dipilih, tetaplah pada opsi standar."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Kini Anda perlu menentukan partisi yg akan dipakai utk instalasi sistem\n"
-"Mandrake Linux. Jika partisi telah didefinisikan, pada instalasi\n"
-"GNU/Linux sebelumnya atau dg alat partisi lain, Anda dapat memakai partisi\n"
-"yang ada. Jika tidak, partisi harddisk harus didefinisikan.\n"
-"\n"
-"Utk membuat partisi, pertama pilihlah harddisk. Anda dapat memilih disk utk\n"
-"dipartisi dg mengklik \"hda\" utk harddisk IDE pertama, \"hdb\" utk disk\n"
-"kedua, \"sda\" untuk drive SCSI pertama dst.\n"
-"\n"
-"Untuk mempartisi harddisk terpilih, opsi berikut dapat digunakan:\n"
-"\n"
-" * \"Hapus semua\": opsi ini menghapus semua partisi pd harddisk terpilih.\n"
-"\n"
-" * \"Alokasi otomatis\": opsi ini memungkinkan Anda secara otomatis membuat\n"
-"partisi Ext2 dan swap di ruang kosong hard drive Anda.\n"
-"\n"
-" * \"Tambahan\": akses ke fitur tambahan:\n"
-"\n"
-"    * \"Simpan tabel partisi\": simpan tabel partisi ke floppy. Berguna\n"
-"untuk pemulihan tabel-partisi di kemudian hari bila perlu. Amat disarankan.\n"
-"\n"
-"    * \"Pulihkan tabel partisi\": mengembalikan tabel partisi yg disimpan\n"
-"sebelumnya dari floppy.\n"
-"\n"
-"    * \"Selamatkan tabel partisi\": jika tabel partisi Anda rusak, cobalah\n"
-"mengembalikannya dg opsi ini. Hati-hati dan ingat bhw ini bisa gagal.\n"
-"\n"
-"    * \"Muat ulang tabel partisi\": buang semua perubahan dan muat tabel\n"
-"partisi semula.\n"
-"\n"
-"    * \"Mount otomatis media lepas\": Jika opsi ini dilepas, user harus\n"
-"secara manual me-mount/unmount media lepas seperti disket dan CD-ROM.\n"
-"\n"
-" * \"Wizard\": pilih ini jika ingin memakai wizard utk mempartisi harddisk.\n"
-"Disarankan jika Anda tak faham ttg partisi.\n"
-"\n"
-" * \"Kembali\": untuk membatalkan perubahan.\n"
-"\n"
-" * \"Ubah ke mode normal/ahli\": aksi tambahan proses partisi (tipe, opsi,\n"
-"format) dan informasi lebih.\n"
-"\n"
-" * \"Selesai\": simpan perubahan ke harddisk bila Anda selesai mempartisi.\n"
-"\n"
-"Catatan: Anda dapat meraih semua opsi dg memakai keyboard. Gunakan [Tab]\n"
-"dan panah [Up/Down].\n"
-"\n"
-"Saat partisi dipilih, Anda dapat menggunakan:\n"
-"\n"
-" * Ctrl-c utk membuat partisi baru (bila partisi kosong dipilih);\n"
-"\n"
-" * Ctrl-d utk menghapus partisi;\n"
-"\n"
-" * Ctrl-m utk menset titik mount\n"
-"\n"
-"Jika Anda menginstal mesin PPC Anda perlu membuat partisi \"bootstrap\" HFS\n"
-"kecil setidaknya 1MB yg akan dipakai oleh bootloader yaboot. Jika dibuat\n"
-"lebih besar, katakan 50MB, Anda bisa memanfaatkannya utk menyimpan kernel\n"
-"cadangan dan image ramdisk utk situasi boot darurat."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Ada lebih dari satu partisi wicrosoft mindows terdeteksi pada harddisk\n"
-"Anda. Pilih partisi yang hendak Anda ubah ukurannya untuk instalasi sistem\n"
-"operasi Linux Mandrake.\n"
-"\n"
-"Tiap partisi terdaftar sbb: \"Nama Linux\",\"Nama windows\",\"Kapasitas\".\n"
-"\n"
-"\"Nama Linux\" berstruktur: \"tipe hard drive\", \"nomor hard drive\",\n"
-"\"nomor partisi\" (misalnya \"hda1\").\n"
-"\n"
-"\"Tipe hard drive\" adalah \"hd\" bila drive bertipe IDE dan \"sd\" jika\n"
-"berupa drive SCSI.\n"
-"\n"
-"\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Jika\n"
-"berupa IDE, maka:\n"
-"\n"
-" * \"a\" berarti \"hard drive master pada kontroller IDE primer\",\n"
-"\n"
-" * \"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n"
-"\n"
-" * \"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n"
-"\n"
-" * \"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n"
-"\n"
-"Pada drive SCSI, \"a\" berarti \"ID SCSI terkecil, \"b\" berarti \"ID SCSI\n"
-"terkecil kedua\", dst.\n"
-"\n"
-"\"Nama windows\" adalah huruf hard drive Anda pada windows (disk pertama\n"
-"pada partisi disebut \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Sabar... Proses ini akan makan waktu beberapa menit"
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX kini perlu tahu Anda ingin instalasi standar (\"Disarankan\") atau\n"
-"ingin punya kontrol lebih besar (\"Ahli\"). Anda juga punya pilihan utk\n"
-"melakukan instalasi baru atau upgrade sistem Mandrake Linux yg ada:\n"
-"\n"
-" * \"Instal\" Hapus total sistem lama. Tergantung isi mesin Anda saat ini,\n"
-"Anda dapat mempertahankan partisi lama (Linux atau lainnya).\n"
-"\n"
-" * \"Upgrade\" Kelas instalasi ini memungkinkan update paket yang terinstal\n"
-"di sistem Mandrake Linux Anda. Partisi dan konfigurasi user yang ada tetap\n"
-"dipertahankan. Semua tahapan konfigurasi lain tetap ada seperti layaknya\n"
-"instalasi biasa.\n"
-"\n"
-" * \"Upgrade Paket Saja\" Kelas instalasi baru yang memungkinkan upgrade\n"
-"sistem Mandrake Linux tanpa mengubah konfigurasi sistem. Penambahan paket\n"
-"juga dimungkinkan.\n"
-"\n"
-"Upgrade dapat dilakukan terhadap sistem Mandrake Linux mulai versi \"8.1\".\n"
-"\n"
-"Pilihlah opsi berikut sesuai pengetahuan Anda ttg GNU/Linux:\n"
-"\n"
-" * Disarankan: pilih ini bila Anda belum pernah menginstal OS GNU/Linux.\n"
-"Proses instalasi amat mudah dan Anda hanya ditanya sedikit pertanyaan.\n"
-"\n"
-" * Ahli: Anda dapat memiilih kelas instalasi ini jika tahu banyak tentang\n"
-"GNU/Linux. Instalasi ahli memungkinkan Anda melakukan instalasi bebas.\n"
-"Bbrp pertanyaan sulit dijawab jika Anda tak berpengetahuan kuat tentang\n"
-"GNU/Linux. Jangan pilih kelas ini kecuali Anda tahu apa yang Anda lakukan."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalnya, DrakX memilih papanketik utk Anda (sesuai bahasa yg Anda pilih)\n"
-"dan Anda bahkan takkan melihat tahap ini. Tapi Anda mungkin tak punya papan\n"
-"ketik yg persis cocok dg bhs Anda: misalnya, jika Anda orang Swis berbahasa\n"
-"Inggris, Anda mungkin masih ingin keyboard Swis. Atau jika Anda berbahasa\n"
-"Inggris tapi tinggal di Quebec, Anda mungkin menghadapi masalah sama. Dalam\n"
-"kedua kasus, Anda akan harus kembali ke tahap instalasi ini dan memilih\n"
-"keyboard yg sesuai dari daftar.\n"
-"\n"
-"Klik \"Lagi\" utk menampilkan daftar lengkap keyboard ter-support."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Pilih bahasa kesukaan Anda utk instalasi dan penggunaan sistem.\n"
-"\n"
-"Klik \"Tambahan\" utk memilih bahasa-bahasa lain yg akan diinstal di\n"
-"workstation Anda. Hal ini akan menginstal file spesifik-bahasa dokumentasi\n"
-"sistem dan aplikasi. Misalnya jika Anda menginapkan user dari Spanyol di\n"
-"mesin Anda, pilih bhs Indonesia sbg bahasa utama di tampilan pohon dan di\n"
-"bagian Tambahan klik bintang abu-abu yg terkait dg \"Spanyol\".\n"
-"\n"
-"Anda dapat menginstal banyak bahasa. Setelah Anda selesai memilih tambahan\n"
-"bahasa (locale) klik \"OK\" untuk melanjutkan."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Secara standar DrakX berasumsi mouse Anda bertombol dua dan akan menset-up\n"
-"emulasi 3-tombol. DrakX otomatis tahu itu mouse PS/2, serial atau USB.\n"
-"\n"
-"Jika Anda ingin menunjuk tipe mouse lain, pilih tipe yg sesuai dari daftar\n"
-"yang disediakan.\n"
-"\n"
-"Jika Anda memilih mouse bukan standar, Anda akan dihadapkan pada layar tes\n"
-"mouse. Gunakan tombol dan roda untuk verifikasi setting. Jika mouse tak\n"
-"bekerja baik tekan spasi atau RETURN untuk \"Batal\" dan pilih lagi."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Pilih port yang benar. Misalnya \"COM1\" di Mindows bernama \"ttyS0\" di \n"
-"GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Ini adalah poin terpenting penentuan sekuriti sistem GNU/Linux Anda: Anda\n"
-"harus mengisi katasandi \"root\". \"root\" adalah administrator sistem dan\n"
-"hanya dia yg berhak melakukan update, menambah user, mengubah konfigurasi\n"
-"sistem, dll. Singkatnya, \"root\" dapat melakukan apapun! Karena itu Anda\n"
-"harus memilih katasandi yang sulit ditebak - DrakX akan memberitahu jika\n"
-"terlalu mudah. Seperti Anda lihat, Anda dapat memilih utk tak memasukkan\n"
-"katasandi, tapi amat kami anjurkan tidak melakukannya jika alasannya hanya:\n"
-"tidak mengira bhw jika GNU/Linux di-boot, sistem operasi lain aman dari\n"
-"kesalahan. Karena \"root\" dapat melampaui semua batasan dan secara tidak\n"
-"sengaja menghapus semua data di partisi, menjadi \"root\" harus dipersulit.\n"
-"\n"
-"Katasandi harus berupa campuran nomor dan huruf minimal 8 karakter. Jangan\n"
-"pernah mencatat katasandi \"root\" - itu membuat sistem mudah dibajak.\n"
-"\n"
-"Tapi katasandi juga jangan terlalu panjang/rumit karena Anda harus ingat\n"
-"tanpa banyak usaha.\n"
-"\n"
-"Katasandi takkan muncul di layar seperti yg diketikkan. Anda harus dua kali\n"
-"mengisi katasandi utk mengurangi kemungkinan salah ketik. Jika Anda 2 kali\n"
-"melakukan kesalahan yg sama, katasandi \"salah\" ini akan dipakai pertama\n"
-"kali anda login.\n"
-"\n"
-"Pada mode ahli, Anda akan ditanya apakah akan berhubungan dengan server\n"
-"otentikasi seperti NIS atau LDAP.\n"
-"\n"
-"Jika jaringan Anda memakai protokol otentikasi LDAP/NIS, pilih \"LDAP\"\n"
-"(atau \"NIS\") utk otentikasi. Tanyalah admin jaringan Anda jika tak tahu.\n"
-"\n"
-"Jika komputer Anda tak terhubung dengan jaringan terkelola, pilihlah\n"
-"\"File lokal\" untuk otentikasi."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO/GRUB adalah pemuat boot GNU/Linux. Step ini biasanya otomatis penuh.\n"
-"DrakX menganalisa sektor boot disk dan beraksi menurut apa yg ditemukan:\n"
-"\n"
-" * jika sektor boot Mindows ditemukan, ia akan menggantinya dg sektor boot\n"
-"GRUB/LILO. Jadi Anda akan dapat memuat baik GNU/Linux maupun OS lain;\n"
-"\n"
-" * jika sektor boot GRUB/LILO ditemukan, ia akan menggantinya dg yg baru;\n"
-"\n"
-"Jika ragu, DrakX akan menampilkan dialog dengan opsi bervariasi.\n"
-"\n"
-" * \"Pemuat boot yang digunakan\": ada tiga pilihan:\n"
-"\n"
-"    * \"GRUB\": jika Anda suka GRUB (menu teks).\n"
-"\n"
-"    * \"LILO dengan menu grafis\": jika Anda suka LILO dg antarmuka grafis.\n"
-"\n"
-"    * \"LILO dengan menu teks\": jika suka LILO dengan antarmuka menu teks.\n"
-"\n"
-" * \"Device boot\": Umumnya Anda takkan mengubah standar (\"/dev/hda\"),\n"
-"tapi jika suka, bootloader dapat diinstal di harddisk kedua (\"/dev/hdb\"),\n"
-"ataupun disket (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay sebelum boot ke image default\": delay yang diberikan di menu\n"
-"pemuat boot kepada user saat me-reboot komputer untuk memilih entri.\n"
-"\n"
-"!! Awas, jika pemuat boot tak diinstal (dg memilih \"Cancel\" di sini),\n"
-"pastikan Anda punya jalan memboot sistem Mandrake Linux Anda! Juga pastikan\n"
-"bahwa Anda tahu apa yang Anda lakukan sebelum mengubah opsi. !!\n"
-"\n"
-"Klik \"Tambahan\" untuk menampilkan opsi lain, yg disediakan utk user ahli.\n"
-"\n"
-"Setelah parameter pemuat-boot dikonfigurasikan, ditampilkan daftar opsi\n"
-"boot yang akan muncul saat boot.\n"
-"\n"
-"Jika ada OS lain terinstal di mesin Anda, itu akan otomatis ditambahkan ke\n"
-"menu boot. Di sini Anda dapat memperbaiki opsi yang ada. Pilih entri dan\n"
-"klik \"Modifikasi\" untuk mengubah atau menghapusnya; \"Tambah\"\n"
-"membuat masukan baru; dan \"Selesai\" membawa Anda ke tahap instalasi\n"
-"berikutnya."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) dan Grub adalah pemuat boot. Dua-duanya dapat mem-boot\n"
-"GNU/Linux atau sistem operasi lain yang ada di komputer Anda.\n"
-"Biasanya, sistem operasi yang sudah ada akan dideteksi secara benar dan\n"
-"diinstallkan. Bila ternyata salah, Anda dapat menambahkan sendiri di layar\n"
-"ini. Hati-hati dalam memilih parameter yang benar.\n"
-"\n"
-"Anda mungkin ingin agar tak ada yg dapat mengakses sistem operasi lain ini.\n"
-"Anda dapat menghapus entrinya. Tapi untuk bisa masuk ke sistem operasi tsb.\n"
-"Anda perlu bootdisk nantinya."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Anda harus menentukan tempat meletakkan info boot GNU/Linux.\n"
-"\n"
-"\n"
-"Kalau Anda kurang tahu, pilih saja \"Sektor pertama di drive (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Kini kita pilih sistem cetak komputer Anda. OS lain mungkin punya satu,\n"
-"Mandrake menyediakan tiga.\n"
-"\n"
-" * \"pdq\" - artinya ``print, djangan nqantri'', adalah pilihan jika Anda\n"
-"punya koneksi langsung ke printer Anda dan ingin bebas dari panik kemacetan\n"
-"printer, serta tak punya printer jaringan. Ia akan meng-handle hanya kasus\n"
-"jaringan yg amat mudah dan agak lambat utk network. Ambil \"pdq\" jika ini\n"
-"kali pertama Anda mengenal GNU/Linux. Anda dapat mengubah pilihan setelah\n"
-"instalasi dg menjalankan PrinterDrake dari Pusat Kontrol Mandrake dan\n"
-"meng-klik tombol expert/ahli.\n"
-"\n"
-" * \"CUPS\"``Sistem Cetak Unix Umum'' canggih untuk mencetak ke printer\n"
-"lokal dan juga separuh planet. Mudah dan berfungsi spt server/klien utk\n"
-"sistem cetak kuno \"lpd\" jadi kompatibel dg sistem lama. Banyak trik dapat\n"
-"dilakukan, tapi setup awalnya hampir semudah \"pdq\". Jika Anda perlu ini\n"
-"utk emulasi server \"lpd\", Anda harus menyalakan daemon \"cups-lpd\".\n"
-"Front-end grafis disediakan utk pencetakan/pemilihan opsi printer.\n"
-"\n"
-" * \"lprNG\"``daemon printer baris Generasi Baru''. Sistem ini dapat\n"
-"melakukan hal yg mirip dg yg bisa dilakukan sistem lain, hanya saja ia akan\n"
-"mencetak ke printer yang terhubung dengan network Novell, karena mensupport\n"
-"protokol IPX, dan bisa mencetak langsung ke perintah shell. Jika Anda perlu\n"
-"Novell atau mencetak ke perintah tanpa memakai konstruksi pipa terpisah,\n"
-"gunakan lprNG. Jika tidak, pilihlah CUPS sebab lebih mudah dan bekerja baik\n"
-"di network."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sedang mendeteksi perangkat IDE komputer Anda, juga men-scan kartu\n"
-"SCSI PCI di sistem Anda. Jika kartu SCSI ditemukan DrakX akan otomatis\n"
-"meng-instal driver yang sesuai.\n"
-"\n"
-"Karena perangkat keras terkadang tak terdeteksi, DrakX akan bertanya apakah\n"
-"ada kartu SCSI PCI. Klik \"Ya\" jika Anda tahu ada kartu SCSI terinstal di\n"
-"mesin Anda. Akan disajikan list kartu SCSI utk dipilih. Klik \"Tidak\" jika\n"
-"tak ada hardware SCSI. Jika Anda tak yakin, periksa daftar perangkat keras\n"
-"yang terdeteksi di mesin Anda dg memilih \"Lihat info hardware\" lalu klik\n"
-"\"OK\". Periksa daftar hardware lalu klik \"OK\" utk kembali.\n"
-"\n"
-"Jika Anda harus menunjuk adaptor secara manual, DrakX akan bertanya apakah\n"
-"Anda ingin menunjuk opsi untuknya. Anda harus mengizinkan DrakX mem-probe\n"
-"hardware utk opsi spesifik-kartu yg diperlukan hardware utk inisiasi. Ini\n"
-"biasanya bekerja baik.\n"
-"\n"
-"Jika DrakX gagal mem-probe opsi yang harus diberikan, Anda perlu memberikan\n"
-"opsi ke driver secara manual. Baca ``User Guide'' (bab 3, bag. \"Collecting\n"
-"information on your hardware\") utk trik mendapat parameter yg dibutuhkan\n"
-"dari dokumentasi hardware, website pabrik (jika Anda punya akses Internet)\n"
-"atau wicrosoft mindows (jika Anda memakai hardware ini di windows)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Anda dapat menambahkan entri yaboot, baik untuk OS lain, kernel lain, atau\n"
-"untuk image boot darurat.\n"
-"\n"
-"Untuk OS lain, entri hanya berisi label dan partisi root.\n"
-"\n"
-"Untuk Linux, ada beberapa pilihan:\n"
-"\n"
-" * Label: nama yg harus diketik di prompt yaboot utk memilih opsi boot ini.\n"
-"\n"
-" * Image: nama kernel untuk diboot. Biasanya bernama vmlinux atau nama lain\n"
-"yang mirip dengan vmlinux atau ditambahkan ekstensi lain.\n"
-"\n"
-" * Root: device \"root\" atau \"/\" untuk instalasi Linux Anda.\n"
-"\n"
-" * Append: pada hardware Apple, opsi append kernel sering digunakan untuk\n"
-"menolong inisialisasi hardware video, atau pengaktifan emulasi tombol mouse\n"
-"pada keyboard utk mouse Apple yang tidak memiliki tombol kedua dan ketiga.\n"
-"Berikut adalah beberapa contohnya:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: opsi ini bisa dipakai utk memuat modul awal sebelum device boot\n"
-"tersedia, atau untuk memuat image ramdisk untuk situasi boot darurat.\n"
-"\n"
-" * Initrd-size: standar ukuran ramdisk biasanya 4096 byte. Jika Anda perlu\n"
-"mengalokasikan ramdisk yang lebih besar, gunakan opsi ini.\n"
-"\n"
-" * Read-write: umumnya partisi \"root\" diberikan secara readonly agar bisa\n"
-"dilakukan pengecekan filesystem sebelum sistem \"hidup\". Di sini Anda bisa\n"
-"mengubah kelakuan aslinya.\n"
-"\n"
-" * NoVideo: Jika hardware video Apple problematis, Anda dapat memakai opsi\n"
-"ini utk mem-boot dalam mode \"novideo\", dengan support framebuffer native.\n"
-"\n"
-" * Default: opsi standar Linux, dapat dipilih hanya dg menekan ENTER pada\n"
-"prompt yaboot. Entri ini juga akan ditandai \"*\" jika Anda menekan [Tab]\n"
-"untuk melihat pilihan boot."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot adalah pemuat boot utk hardware NewWorld MacIntosh. Ia mampu memboot\n"
-"GNU/Linux, MacOS maupun MacOSX jika terdapat di komputer Anda. Biasanya,\n"
-"OS lain ini terdeteksi dan terinstal dengan benar. Jika tidak, Anda dapat\n"
-"menambahkan entry secara manual di layar ini. Hati-hati memilih parameter.\n"
-"\n"
-"Opsi utama yaboot adalah:\n"
-"\n"
-" * Pesan Awal: pesan teks yang ditampilkan sebelum prompt boot.\n"
-"\n"
-" * Device Boot: menunjukkan tempat Anda ingin meletakkan info yg diperlukan\n"
-"utk memboot GNU/LInux. Biasanya Anda men-setup partisi bootstrap lebih dulu\n"
-"untuk menyimpan informasi ini.\n"
-"\n"
-" * Delay Open Firmware: tak seperti LILO, ada dua macam delay tersedia di\n"
-"yaboot. Delay pertama diukur dalam detik dan di sini Anda bisa memilih CD,\n"
-"boot OF, MacOS, atau Linux.\n"
-"\n"
-" * Timeout Boot Kernel: timeout ini mirip delay boot LILO. Setelah memilih\n"
-"Linux, akan ada delay 0.1 detik sebelum kernel default Anda dipilih.\n"
-"\n"
-" * Aktifkan boot CD?: opsi ini memungkinkan Anda memilih \"C\" (CD) pada\n"
-"prompt boot pertama.\n"
-"\n"
-" * Aktifkan boot OF?: dg opsi ini Anda bisa memilih \"N\" (Open Firmware)\n"
-"saat prompt boot pertama.\n"
-"\n"
-" * OS Standar: Anda dapat memilih OS yang akan diboot secara default saat\n"
-"delay Open Firmware terlampaui."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Di sini disajikan macam-macam parameter mesin Anda. Tergantung hardware yg\n"
-"ter-instal, Anda dapat - atau tidak, melihat entri berikut:\n"
-"\n"
-" * \"Mouse\": cek konfigurasi mouse, klik tombol utk mengubahnya bila perlu\n"
-"\n"
-" * \"Keyboard\": cek konfigurasi map keyboard, klik tombol utk mengubahnya\n"
-"bila perlu.\n"
-"\n"
-" * \"Zona waktu\": DrakX menerka zona waktu Anda dari bahasa yg Anda pilih.\n"
-"Tapi sekali lagi seperti pilihan keyboard, Anda mungkin tak berada di negri\n"
-"yang selaras dg bahasa terpilih. Jadi Anda mungkin perlu menekan tombol\n"
-"\"Zona waktu\" utk mengkonfigurasikan jam sesuai zona waktu tempat Anda.\n"
-"\n"
-" * \"Printer\": klik \"No Printer\" utk membuka dukun konfigurasi printer.\n"
-"\n"
-" * \"Kartu suara\": kartu suara terdeteksi di sistem Anda akan ditampilkan\n"
-"di sini. Tiada modifikasi yg dapat dilakukan saat instalasi.\n"
-"\n"
-" * \"Kartu TV\": kartu TV yg terdeteksi di sistem Anda akan ditampilkan di\n"
-"sini. Tiada modifikasi yg dapat dilakukan saat instalasi.\n"
-"\n"
-" * \"Kartu ISDN\": kartu ISDN yg terdeteksi di sistem Anda akan ditampilkan\n"
-"di sini. Anda dapat meng-klik tombol utk mengubah parameternya."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Pilih harddrive yg akan dihapus utk disediakan bagi partisi\n"
-"Linux Mandrake. Hati-hati, semua data di situ akan hilang dan\n"
-"tak dapat dikembalikan seperti semula!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik \"OK\" bila Anda ingin menghapus semua data dan partisi yang ada di\n"
-"hard drive ini. Awas, setelah mengklik \"OK\" Anda tak dapat mengembalikan\n"
-"data dan partisi di drive ini termasuk data windows.\n"
-"\n"
-"Pilih \"Batal\" utk membatalkan aksi ini tanpa kehilangan data dan partisi\n"
-"yang ada dalam hard drive ini."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Gagal mengakses modul kernel yang cocok (file %s hilang), ini umumnya "
-"berarti bahwa disket boot Anda tak sinkron dengan  media instalasi (buatlah "
-"disket boot baru"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Anda harus juga memformat %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Anda memilih server berikut: %s\n"
-"\n"
-"Server ini aktif sesuai standar. Sementara ini tiada kabar ttg sekuritas,\n"
-"tapi mungkin ada yg telah ditemukan. Jika terjadi, upgrade-lah selekas "
-"mungkin.\n"
-"\n"
-"Jadi instal server ini?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Tanpa domain NIS, broadcast tak dapat dipakai"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Masukkan disket yang sudah diformat dengan tipe FAT di drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Disketnya belum diformat dengan sistem FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Untuk menggunakan pilihan paket yang sudah disimpan sebelumnya, bootlah "
-"instalasi dengan pilihan ''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error saat membaca file %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Ada hardwaare di komputer ini yang membutuhkan driver ``proprietary''.\n"
-"Anda bisa mencari informasinya di: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Pilih dulu partisi rootnya.\n"
-"Caranya, buatlah partisi (atau pilih di yang sudah ada).\n"
-"Lalu pilih ``Mount point'' dan set ke `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Anda harus buat partisi swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Anda belum punya partisi swap\n"
-"\n"
-"Jalan terus?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Anda harus punya partisi FAT termount pada /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Pakai ruang kosong"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Tidak ada cukup ruangan untuk mengalokasikan partisi baru"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Pakai partisi yang sudah ada"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Tidak ada partisi yang bisa digunakan"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Gunakan partisi windows untuk loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Partisi mana yang hendak dipakai oleh Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Pilih ukurannya"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ukuran partisi root dalam MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ukuran partisi swap dalam MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Pakai ruang kosong pada partisi windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "partisi mana yang mau Anda ubah ukurannya?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Sedang menghitung bound filesystem windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Saya tidak dapat mengubah ukuran partisi FAT ini,\n"
-"Ada error ini yang terjadi: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Partisi windows Anda terlalu terfragmen, jalankan ``defrag'' dulu"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AWAS!\n"
-"\n"
-"DrakX sekarang hendak mengubah ukuran partisi Mindows Anda. Hati-hati:\n"
-"proses ini amat berbahaya. Bila Anda belum melakukannya, silakan\n"
-"keluar dari proses instalasi ini, lalu reboot ke windows\n"
-"jalankan scandisk (dan defrag juga) di partisi ini lalu backup datanya.\n"
-"Setelah yakin, tekan Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Tentukan ukuran untuk menyimpan windows"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partisi %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Resize FAT gagal: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Tidak ada partisi FAT untuk diubah ukurannya atau untuk digunakan sebagai "
-"loopback (atau tidak ada cukup ruangan)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Hapus seluruh disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Buang windows"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Anda punya beberapa harddisk, yang mana yang ingin di-instal linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SEMUA partisi yang ada beserta data pada drive %s akan hilang"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Lakukan partisi disk secara custom"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "gunakan fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Anda bisa buat partisi %s \n"
-"Habis itu, jangan lupa simpan dengan menekan tombol `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Eh, Anda tak punya cukup ruangan pada partisi windows!"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Aduh, ruangannya tak cukup nih untuk menginstall"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Wizard partisi DrakX menemukan solusi berikut:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Proses partisi gagal: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Up-kan Jaringan"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Matikan Jaringan"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ada error nih, tapi aku tak tahu cara mengatasinya.\n"
-"Lanjutkan saja, tapi resiko tanggung sendiri yah."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Lokasi mount %s ada dua"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Ada paket yang penting tak benar diinstalnya.\n"
-"Mungkin saja drive cdrom atau cdromnya yang rusak.\n"
-"Cek dulu cdromnya di komputer yang sudah terinstall Linux dengan\n"
-"perintah \"rpm -qpl Mandrake/RPMS/*.rpm\" dulu gih\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Selamat Datang di %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Wah maaf nih, tak ada floppy drive yah ?"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Memulai langkah `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sumber daya sistem Anda rendah. Nantinya Anda akan sulit menginstal\n"
-"Linux-Mandrake. Cobalah instalasi text. Untuk hal ini silakan\n"
-"tekan `F1' saat booting pada CDROM, lalu ketikkan `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Kelas Instal"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Pilihlah kelas instalasi berikut:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukuran total grup yang dipilih kira-kira %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,\n"
-"pilih dulu persentase paket yang hendak diinstall.\n"
-"\n"
-"Persentasi kecil berarti akan install paket yang penting-penting saja;\n"
-"dan sebaliknya persentase 100%% akan install semua paket yang tadi sudah\n"
-"dipilih"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Anda punya hard disk cuma cukup untuk sekitar %d%% dari seluruh paketini.\n"
-"\n"
-"Kalau Anda mau nginstall dengan ukuran yang lebih kecil dari ini,\n"
-"pilih dulu persentase paket yang hendak diinstall.\n"
-"Persentasi kecil berarti akan install paket yang penting-penting saja;\n"
-"dan sebaliknya persentase %d%% akan install paket yang tadi sudah\n"
-"dipilih sebanyak-banyaknya"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Anda akan bisa memilih dengan lebih lengkap nanti"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Persentase paket yang akan diinstall"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pilihan Grup Paket"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Pilih paket sendiri"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukuran total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paket Error"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nama: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ukuran: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Derajat: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Anda tak bisa pilih paket ini sebab tak ada ruang kosong untuk menginstallnya"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Paket ini yang akan diinstall"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Paket berikut adalah yang akan dihapus"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Anda tak bisa pilih/buang paket ini"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Paket ini harus diinstall, tak bisa dibuang"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Anda tak bisa buang paket ini, sebab dia sudah diinstall"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Paket ini mesti diupgrade\n"
-"Benar tak mau dipilih?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Anda tak bisa buang paket ini. dia mesti diupgrade"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Tunjukkan paket yang sudah dipilih secara otomatis"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instal"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Muat/Simpan di floppy"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Update pilihan paket"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Instalasi minimal"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Pilih paket yang akan diinstal"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalasi"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Perkiraan"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Sisa waktu "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Tunggu ya, saya sedang menyiapkan instalasi"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Sedang instal paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Terima"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Tolak"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ganti CDROM!\n"
-"\n"
-"Silakan masukkan CDROM berlabel \"%s\" di drive Anda dan tekan OK\n"
-"Kalau Anda tak punya CDROM ini, tekan Batal aja untuk membatalkan instalasi "
-"dari CD ini."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Cuek aja?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Ada error mengurutkan paket"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Ada error saat menginstall paket"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Peringatan\n"
-"\n"
-"Mohon dibaca dulu semua ketentuan di bawah. Bila Anda tidak setuju dengan "
-"salah satu bagiannya\n"
-"Anda tidak dapat menginstal media CD berikutnya. Silakan tekan 'Tolak' untuk "
-"melanjutkan instalasi\n"
-"tanpa menggunakan media ini.\n"
-"\n"
-"\n"
-"Ada beberapa komponen yang ada di media CD berikutnya tidak dilepas dalam "
-"lisensi GPL atau perjanjian\n"
-"sejenis. Komponen-komponen itu diatur dalam ketentuan dan kondisi dalam "
-"lisensi yang bersangkutan.\n"
-"Baca dengan hati-hati dan penuhi setiap lisensi sebelum Anda menyebarkan "
-"komponen tersebut.\n"
-"Model lisensi tersebut akan melarang proses transfer, duplikasi (kecuali "
-"untuk alasan backup), penyebaran\n"
-"kembali, rekayasa ulang, de-assembly, de-kompilasi, atau modifikasi pada "
-"komponen tersebut.\n"
-"Tiap pelanggaran pada perjanjian akan segera mengakhiri hak-hak Anda dalam "
-"lisensi tersebut.\n"
-"Kecuali bila dibolehkan, Anda tidak dapat menginstall program ini dalam "
-"lebih dari satu sistem\n"
-"atau menggunakannya di jaringan. Bila Anda masih ragu, silakan huibungi "
-"langsung distributor\n"
-"atau editor komponen ini. Anda dilarang mentransfer komponen ini ke pihak "
-"ketiga atau mengkopinya.\n"
-"\n"
-"\n"
-"Semua hak pada komponen di media CD berikutnya dimiliki oleh pembuatnya "
-"masing-masing\n"
-"dan dilindungi oleh hukum hak cipta dan hak intelektual khusus untuk program "
-"komputer.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ada error"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Anda ingin tinggalkan instalasi?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Persetujuan Lisensi"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linux-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linux-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Keyboard"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Pilih layout keyboard Anda"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ini adalah daftar keyboard yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kelas instalasi yang anda diinginkan?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instal/Update"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Akan instal atau update?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Disarankan"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ahli"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Upgrade"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Hanya upgrade paket"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Pilihlah tipe mouse Anda."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port Mouse"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Di serial port mana mouse Anda dicolokkan ?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulasi tombol"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulasi 2 tombol"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulasi tombol 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurasikan card PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "konfigurasi IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Tidak ada partisi"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Mendeteksi partisi untuk mencari lokasi mount"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Pilih lokasi mount"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Saya tak bisa baca tabel partisi, udah hancur lebur nih :(\n"
-"Aku akan coba hapus partisi yg jeleknya (SEMUA DATA akan HILANG).\n"
-"Solusi lainnya adalah jangan biarkan saya memodifikasi tabel partisi.\n"
-"(pesan errornya adalah %s)\n"
-"\n"
-"Anda setuju untuk menghapus semua partisi?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake gagal membaca tabel partisi Anda.\n"
-"Lanjutkan tapi resiko tanggung sendiri!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Tiada ruang 1MB utk bootstrap! Instal akan berlanjut, tetapi utk mem-boot "
-"sistem, Anda perlu membuat partisi bootstrap di DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Tiada partisi root tertemukam utk upgrade"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partisi root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Manakah partisi root (/) di sistem Anda?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Anda harus reboot agar perubahan table partisi dapat berlaku"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Pilih partisi yang akan diformat"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Periksa bad blok?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Melakukan format partisi"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Membuat dan memformat file %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Instalasi tidak bisa diteruskan karena swap kurang, tambahin dong"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Sedang mencari paket yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Mencari paket untuk diupgrade"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Sistem ini tak punya cukup space untuk install atawa upgrade (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Lengkap (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Disarankan (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Pilih muat/simpan seleksi paket di floppy.\n"
-"Formatnya sama dengan floppy buatan auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Muat dari floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Memuat dari floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pilihan paket"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Masukkan disket yg berisi seleksi paket"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Simpan di floppy"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Ukuran terpilih melebihi area yg ada"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tipe instalasi"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Anda belum memilih grup paket.\n"
-"Pilih instalasi minimal yang Anda ingin:"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Dengan X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Dengan dokumentasi dasar (disarankan!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Sungguh instalasi minimal (khususnya tanpa urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Kalau Anda punya semua CD pada daftar di bawah, tekan OK.\n"
-"Kalau tak punya sama sekali, click Cancel.\n"
-"Kalau cuma punya beberapa aja, pilih aja, trus klik Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Label CD-ROM \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Sedang menyiapkan instalasi"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Sedang instal paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfigurasi Instalasi akhir"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Masukkan floppy boot ke drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Masukkan disket Update Modules ke drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Anda sekarang bisa mendownload software khusus untuk enkripsi.\n"
-"\n"
-"PERHATIAN:\n"
-"\n"
-"Berhubung adanya peraturan yang berbeda di berbagai lokasi berkenaan\n"
-"dengan penggunaan software ini, Anda dan/atau end user yang akan\n"
-"menggunakan software ini harus memastikan bahwa dirinya boleh untuk\n"
-"mendownload dan/atau menggunakan software ini sesuai dengan hukum\n"
-"yang berlaku di lokasinya.\n"
-"\n"
-"Juga ditekankan bahwa Anda dan/atau end user harus sadar bahwa dirinya\n"
-"tidak diperkenankan untuk melanggar hukum tersebut. Apabila melanggar\n"
-"akan dikenakan sangsi yang berat.\n"
-"\n"
-"Mandrakesoft dan para pembuat software dan/atau penyedianya sama sekali "
-"tidak\n"
-"bertanggung jawab baik untuk segala kerusakan khusus, tidak langsung, dan\n"
-"insidentil apapun (termasuk namun tidak terbatas pada kehilangan keuntungan\n"
-"gangguan bisnis, kehilangan data komersial dan kerugian lain dan \n"
-"segala kewajiban yang harus dibayarkan sesuai hukum) yang disebabkan\n"
-"oleh penggunaan, kepemilikan, atau penjualan dari software yang\n"
-"didownload ini, setelah Anda dan/atau end user memiliki akses\n"
-"ke software tersebut setelah menandatangani perjanjian yang ada.\n"
-"\n"
-"Apabila ada pertanyaan mengenai perjanjian ini, silakan hubungi\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Anda kini dapat men-download paket terupdate yg dirilis pasca distribusi.\n"
-"\n"
-"Anda akan mendapat pembetulan keamanan/kutu, tapi Anda perlu punya koneksi\n"
-"Internet terkonfigurasi utk melanjutkan.\n"
-"\n"
-"Ingin instal update ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Mandrake Linux sedang dihubungi untuk mengambil daftar mirror"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Pilih mirror tempat Anda ingin mengambil paket program"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Saya sedang mencek mirror untuk mengambil daftar paket yang tersedia"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Pilih timezone Anda"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Jam hardware diset ke GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "sinkronisasi waktu otomatis (dg NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Server NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "server CUPS remote"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Tidak ada printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Anda punya kartu suara ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Jalankan \"sndconfig\" setelah instalasi untuk konfigurasi kartu suara"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Kartu suara tak terdeteksi. Coba \"harddrake\" setelah instalasi"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ringkasan"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Timezone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "kartu ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Sound Card"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV Card"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "File lokal"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Set katasandi root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Tak berkatasandi"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Katasandinya terlalu mudah (harus paling tidak %d karakter)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentikasi"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Otentikasi LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Basis dn LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Server LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Otentikasi NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domain NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa\n"
-"tergantung pada bootloader. Kadang ini berguna bila Anda tidak mau install\n"
-"SILO  di sistem Anda, atau saat sistem operasi lain menghapus SILO, atau "
-"SILO\n"
-"tidak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga bisa "
-"digunakan\n"
-"dengan image rescue Mandrake, yang memudahkan kita untuk merecover sistem\n"
-"dari kegagalan. Sekarang, saya mau tanya nih... mau bikin bootdisk nggak ?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Drive Disket Pertama"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Drive disket kedua"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Lewatkan"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa\n"
-"tergantung pada bootloader. Kadang ini berguna bila Anda tidak mau install\n"
-"lilo (ataw grub) di sistem Anda, atau saat sistem operasi lain menghapus "
-"lilo, atau lilo\n"
-"tidak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga bisa "
-"digunakan\n"
-"dengan image rescue Mandrake, yang memudahkan kita untuk merecover sistem\n"
-"dari kegagalan. Sekarang, saya mau tanya nih... mau bikin bootdisk nggak ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(PERINGATAN! Anda menggunakan XFS untuk partisi root,\n"
-"pembuatan bootdisk di disket 1.44 Mb mungkin gagal,\n"
-"karena XFS perlu driver amat besar)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Tiada floppy drive tersedia"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Pilih drive floppy untuk membuat bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Masukkan disket di %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Membuat bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Membuat bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Nampaknya Anda punya mesin DuniaLama/TakJelas.\n"
-"Bootloader yaboot takkan bekerja.\n"
-"Instal akan berlanjut, tapi Anda perlu memakai\n"
-"BootX utk mem-boot mesin Anda"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ingin pakai aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ada error saat install aboot,\n"
-"paksakan instalasi walau merusak partisi awal?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instalasi bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalasi bootloader gagal. Ada kesalahan berikut:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Gantilah bootdevice Open Firmware untuk mengaktifkan bootloader.\n"
-" Jika Anda tak melihat prompt bootloader saat reboot, tekan\n"
-" Command-Option-O-F saat reboot dan ketik:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" kemudian: shut-down\n"
-"Anda akan melihat prompt bootloader pada boot selanjutnya."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Masukkan disket kosong di drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Lagi buat disket auto install"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Ada tahapan yang tidak diselesaikan.\n"
-"\n"
-"Anda ingin keluar sekarang?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Selamat, instalasi selesai.\n"
-"Cabut media boot dan tekan Return/Enter untuk reboot.\n"
-"\n"
-"\n"
-"Untuk informasi perbaikan rilis Linux Mandrake ini,\n"
-"silakan lihat Errata di:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informasi untuk konfigurasi sistem juga tersedia di \n"
-"bab Instalasi akhir di Buku Petunjuk Resmi Linux Mandrake."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Buat floppy instalasi otomatis"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Bila Anda mau, auto install bisa dilakukan secara otomatis penuh,\n"
-"jadi instalasinya akan mengusai hard drive!\n"
-"(ini dimaksudkan untuk menginstall pada komputer lain)\n"
-"\n"
-"Mungkin Anda perlu mengulangi instalasinya.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Otomatis"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ulang"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Simpan pilihan paket"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalasi Linux Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> untuk pindah | <Spasi> untuk pilih | <F12> Layar berikut"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu hilang"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper hilang"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Pilih file"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Tambahan"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Dasar"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Tunggulah"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Buka Tree"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Tutup Tree"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Togel tampilan rata dan terurut grupnya"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Pilihan salah, silakan ulangi\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Pilihan Anda? (default %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entri yang harus Anda penuhi:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Pilihan Anda? (0/1, default %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Tombol `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Anda ingin meng-klik tombol ini? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Pilihan Anda? (default %s%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Banyak yang dapat dipilih dari (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Pilihlah nomor pertama dari 10-range yang ingin Anda edit,\n"
-"atau tekan Enter untuk melanjutkan.\n"
-"Pilihan Anda? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Catatan, label berubah:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Kirim ulang"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceko (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Jerman"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spanyol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finland"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Perancis"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norwegia"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polandia"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusia"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Swedia"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Keyboard UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Keyboard US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albania"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenia (lama)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenia (mesintik)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenia (fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaijan (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulagaria (fonetik)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaria (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazil (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusia"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Swis (layout Jerman)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Swis (layout Prancis)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceko (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Jerman (tanpa dead key)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Denmark"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegia)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedia)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonia"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgia (layout \"Rusia\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgia (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Yunani"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hungaria"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroasia"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Ibrani"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Ibrani (fonetik)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandia"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itali"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Jepang 106 tombol"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Keyboard Korea"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Amerika Latin"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuania AZERTY (lama)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuania AZERTY (baru)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuania \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuania \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvia"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonia"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Belanda"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polandia (layout qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polandia (layout qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugis"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanian (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanian (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusia (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenia"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakia (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakia (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbia (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Papanketik Muangthai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Papanketik Tajik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turki (model \"F\" tradisional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turki (model \"Q\" modern)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Keyboard US (internasional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavia (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "kunci Alt Kanan"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Kedua Shift bersamaan"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Kunci Control dan Shift bersamaan"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Kunci CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Kunci Ctrl dan Alt bersamaan"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Kunci Alt dan Shift bersamaan"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Kunci \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Kunci \"Mindows\" kiri"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Kunci \"Mindows\" kanan"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Mount melingkar %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Hapus dulu volume logiknya\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "Support PCMCIA tak ada lagi utk kernel 2.2, pakailah kernel 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mouse Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse PS2 wheel generik"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 tombol"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse Generik 2 Tombol"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generik"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "wheel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse Generik 3 Tombol"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Sistem Mouse (serial)"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tombol"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tombol"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "tiada"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Tidak pakai mouse"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Silakan di test mousenya"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Untuk mengaktifkan mouse,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "gerakan rodanya!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Selesai"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Lanjutkan ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Tahap sebelumnya"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Sudah sesuai?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Hubungan ke Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Cara yang umum untuk terkoneksi ke adsl adalah dengan menggunakan pppoe.\n"
-"Namun ada juga yang menggunakan pptp, dan ada yang pakai dhcp saja.\n"
-"Bila ragu, pilih saja 'gunakan pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "usb speedtouch Alcatel"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gunakan dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gunakan pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gunakan pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Klien dhcp mana yang ingin Anda pakai?\n"
-"defaultnya adalah dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Tidak ada adapter jaringan ethernet yang terdeteksi di sistem ini.\n"
-"Saya jadinya tidak dapat mengkonfigurasikan tipe koneksi ini deh."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Pilih interface jaringan"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Pilih adapter jaringan yang akan digunakan untuk terhubung ke Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Tidak ada card network ya?"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigureasi jaringan"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Masukkan nama komputernya karena ada server DHCP yang mengharuskan adanya "
-"hostname ini.\n"
-"Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified\n"
-"misalnya ``samson.ciawi.mdamt.net''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nama Host"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Wizard Konfigurasi Jaringan"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN external"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "card ISDN Internal"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Tipe koneksi ISDN apa yang Anda miliki?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Konfigurasi ISDN mana yg Anda suka?\n"
-"\n"
-"* Konfigurasi lama menggunakan isdn4net, berisi alat perkasa,\n"
-"  tetapi tricky bagi pemula, dan tidak standar.\n"
-"\n"
-"* Konfigurasi baru lebih mudah dimengerti, lebih standar,\n"
-"  tapi dg alat lebih sedikit.\n"
-"\n"
-"Kami sarankan konfigurasi ringan.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurasi baru (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurasi lama (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "konfigurasi ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Pilih provider Anda.\n"
-"Bila tidak ada dalam daftar, pilih Tidak Terdaftar"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protokol Eropa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokol Eropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol lain"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol lain \n"
-" tanpa D-Channel (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Protokol apa yang ingin Anda gunakan?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Tipe card mana yang Anda punya?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Saya tak tahu"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Bila Anda punya card ISA, konfigurasi pada layar berikut nanti harusnya "
-"sudah benar.\n"
-"\n"
-"Bila Anda punya card PCMCIA, Anda harus mengetahui irq dan io kartu Anda "
-"itu.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Batal"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Lanjut"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Manakah card ISDN Anda?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Saya mendeteksi adanya sebuah card ISDN PCI, tapi saya tidak tahu tipenya. "
-"Silakan pilih card PCI tersebut pada layar berikutnya."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Tiada kartu PCI ISDN ditemukan. Pilihlah satu pd layar berikut."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Di serial port mana modem Anda terhubung?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Parameter Dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nama koneksi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Nomor telepon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-based"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-based"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nama domain"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Server DNS Primary (boleh diisi/tidak)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Server DNS Sekondari (boleh tidak diisi)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa putuskan atau konfigurasi koneksi yang ada sekarang."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa mengkonfigurasikan ulang koneksi ini"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Sekarang Anda sedang terhubung ke Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Anda bisa sambungkan koneksi ke Internet atau mengkonfigurasikan ulang."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Anda sedang tidak terhubung ke Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Tersambung"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Putus"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfigurasikan koneksi"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Koneksi dan konfigurasi Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Kita akan mengkonfigurasi koneksi %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Konfigurasi koneksi %s.\n"
-"\n"
-"\n"
-"Tekan OK utk mulai."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigurasi Jaringan"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Jaringan Anda sudah terkonfigurasi lho\n"
-"Silakan klik OK untuk rekonfigurasi ulang koneksi jaringan/internet ini, "
-"atau batal jika Anda berubah pikiran.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Selamat Datang di Wizard Koneksi Jaringan\n"
-"\n"
-"Sekarang kita akan mengkonfigurasikan internet/jaringan.\n"
-"Bila Anda tidak mau menggunakan deteksi otomatis, mohon untuk tidak memilih "
-"checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Pilih profil yang hendak Anda konfigurasikan"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Gunakan deteksi otomatis"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Mendeteksi alat..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Konfigurasi koneksi modem biasa "
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "dideteksi pada port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Konfigurasi koneksi ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s telah terdeteksi"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Koneksi ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "telah dideteksi ada pada interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Konfigurasi jaringan kabel"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Koneksi kabel terdeteksi"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "konfigurasi LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ada ethernet card yang terdeteksi"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Pilih koneksi yg hendak dikonfigurasi"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Anda mengkonfigurasi bbrp jalan utk koneksi Internet.\n"
-"Pilih yg ingin Anda pakai.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Koneksi Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Anda mau jalankan koneksi ini saat boot?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Konfigurasi Jaringan"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Network perlu di-start ulang"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problem terjadi saat restart netword:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Selamat, jaringan dan internet telah dikonfigurasikan.\n"
-"\n"
-"Konfigurasi akan diterapkan di sistem Anda.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Setelah itu, silakan restart X Anda agar bebas dari masalah pergantian\n"
-"nama host."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Problem konfigurasi.\n"
-"Tes koneksi Anda via net_monitor atau mcc. Jika koneksi tak berjalan, Anda "
-"mungkin perlu jalankan konfigurasi dari awal lagi"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AWAS: device ini sebelumnya telah dikonfigurasikan untuk terhubung ke "
-"Internet.\n"
-"Tekan OK untuk tetap menggunakan konfigurasi lama.\n"
-"Bila ingin menggantinya, silakan ganti isi pada kolom-kolom di konfigurasi "
-"ini."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Masukkan konfigurasi IP untuk mesin ini.\n"
-"Tiap item harus diberikan sebagai alamat IP dalam notasi decimal\n"
-"bertitik (misalnya 202.159.35.32)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurasi perangkat jaringan %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Alamat IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP otomatis"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Alamat IP harus dalam format 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Masukkan nama komputernya.\n"
-"Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified\n"
-"misalnya ``mdamt.fdns.net''.\n"
-"Anda juga bisa masukkan alamat IP gatewaynya kalau ada"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (mis. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Device Gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfigurasi proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Lacak ID kartu network (berguna di laptop)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy biasanya http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy biasanya ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Konfigurasi Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Anda ingin tes koneksi Internet sekarang?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Tes koneksi Anda..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistem ini sekarang terhubung ke Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Untuk alasan keamanan, sekarang akan diputus koneksinya"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sistem ini sepertinya tidak terhubung ke Internet deh.\n"
-"Cobalah konfigurasikan ulang koneksinya."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurasi Koneksi"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Silakan isi atau cek kolom berikut"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ card"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Mem card (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO Card"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 card"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 card"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Nomor telepon Anda"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nama provider (misalnya provider.net.id)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Nomor telepon provider"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS Provider 1 (boleh diisi boleh tidak)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS Provider 2 (boleh diisi boleh tidak)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Pilih negri Anda"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "mode dial"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Laju koneksi"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout koneksi (detik)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login Account (username)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Katasandi Account"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "gagal melakukan mount: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partisi extended tak bisa dipakai di platform ini"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Anda punya tabel partisi tapi tidak bisa saya gunakan.\n"
-"Satu-satunya cara adalah memindahkan partisi primary Anda ke partisi\n"
-"extended selanjutnya"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Proses restore dari file %s gagal: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "File backup rusak"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error pada saat menulis file %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ada sesuatu yang buruk terjadi pada drive Anda,\n"
-"hal ini saya ketahui saat gagal mengecek integritas data di situ.\n"
-"Artinya, data apapun yang ditulis ke situ akan gagal."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "harus ada"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "penting"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "bagus deh"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bagus"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "hmm.."
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Printer lokal"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "printer remote"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer di server CUPS remote"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer di server lpd remote"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Printer jaringan (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer di server SMB/windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer di server NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Masukkan URI device printer"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Pipe job ke perintah"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Model tak dikenal"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Printer Lokal"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Printer Remote"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " di port paralel \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", printer USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", alat multifungsi di port paralel \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", alat multifungsi di USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", alat multifungsi di HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", alat multifungsi"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", cetak ke %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "di server LPD \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "di server Windows \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "di server Novell \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", menggunakan perintah %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Printer telanjang (tanpa driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(di %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(di mesin ini)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Di server CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Pilih koneksi Printer"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Bagaimana printer ini disambung ke komputer?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Printer pada server CUPS remote tak perlu dikonfigurasikan di sini; printer "
-"ini akan secara otomatis dideteksi."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "konfigurasi CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Tentukan server CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Untuk mengakses printer di server CUPS remote dari jaringan lokal, Anda tak "
-"perlu mengkonfigurasi apapun; server CUPS otomatis memberi tahu mesin Anda "
-"ttg printer mereka. Semua printer yg dikenal mesin Anda terdaftar di bagian "
-"\"Printer remote\" di window utama Printerdrake. Bila server CUPS Anda ada "
-"di jaringan lain, Anda harus menyodorkan alamat IP dan nomor port server "
-"CUPS utk mendapat info printer dari server. Jika tidak, biarkan kosong."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Biasanya CUPS terkonfigurasi otomatis sesuai jaringan Anda, sehingga Anda "
-"dapat mengakses printer di server CUPS jaringan lokal Anda. Jika tak jalan, "
-"matikan \"Konfigurasi CUPS otomatis\" dan edit /etc/cups/cupsd.conf secara "
-"manual. Jangan lupa restart CUPS selanjutnya (komando: \"service cups restart"
-"\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Alamat IP harus seperti 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Nomor port harus berupa bilangan bulat"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP server CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Konfigurasi CUPS otomatis"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Pendeteksian alat..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Tes port"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Tambah printer baru"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Selamat Datang di Dukun Setup Printer\n"
-"\n"
-"Dukun ini dapat menginstal printer lokal atau remote utk digunakan dari "
-"mesin ini dan juga dari mesin lain di network.\n"
-"\n"
-"Dia akan menanyai semua info yg dibutuhkan utk menset up printer dan memberi "
-"Anda akses ke semua driver printer tersedia, opsi driver, dan tipe koneksi "
-"printer."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Printer Lokal"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Selamat Datang di Dukun Setup Printer\n"
-"\n"
-"Dukun ini membantu Anda menginstal printer terhubung dengan komputer ini.\n"
-"\n"
-"Hubungkan printer Anda ke komputer ini dan nyalakan. Klik \"Lanjut\" jika "
-"siap, atau \"Batal\" bila Anda tak ingin men-set up printer sekarang.\n"
-"\n"
-"Ingat bahwa beberapa komputer bisa crash saat deteksi otomatis printer, "
-"matikan \"Deteksi otomatis printer\" utk instalasi printer tanpa deteksi "
-"otomatis. Pakailah \"Mode Ahli\" printerdrake bila Anda ingin set up "
-"pencetakan di printer remote jika printerdrake tak otomatis menampilkannya."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Printer deteksi otomatis"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Selamat, printer Anda kini terinstal dan terkonfigurasi!\n"
-"\n"
-"Anda dapat mencetak dg perintah \"Cetak\" di aplikasi Anda (biasanya di menu "
-"\"File\").\n"
-"\n"
-"Jika Anda ingin menambah, menghapus atau mengubah nama printer, atau jika "
-"ingin mengubah opsi standar setting (tray kertas, kualitas cetak, ...), "
-"pilih \"Printer\" di bagian \"Perangkat Keras\" Pusat Kontrol Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Deteksi Otomatis Printer"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake dapat mendeteksi otomatis printer paralel dan USB yang "
-"terkoneksi lokal, tapi ingat di beberapa sistem deteksi otomatis DAPAT "
-"MEMBEKUKAN SISTEM ANDA DAN MEMBUAT SISTEM FILE ANDA RUSAK! Jadi kerjakan "
-"ATAS RESIKO ANDA!\n"
-"\n"
-"Anda ingin deteksi otomatis printer?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Lakukan deteksi otomatis"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Setup printer secara manual"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Terdeteksi %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer di port paralel \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "printer USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Printer tak ditemukan! Untuk menginstal printer secara manual masukkan nama "
-"alat / file di baris masukan (Port Parallel: /dev/lp0, /dev/lp1, ..., "
-"sebanding dg LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer "
-"USB kedua: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Masukkan nama alat atau file!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Tiada printer lokal ditemukan!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Printer network hanya dapat diinstal setelah instalasi ini. Pilih \"Hardware"
-"\" lalu \"Printer\" di Pusat Kontrol Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Untuk menginstal printer network, klik \"Batal\", pindah ke \"Mode Ahli\", "
-"dan klik \"Tambah printer baru\" lagi."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Printer berikut terdeteksi otomatis, jika bukan yang ingin dikonfigurasikan, "
-"masukkan nama alat/file di baris masukan"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Daftar printer terdeteksi otomatis. Pilihlah printer yang ingin diset up "
-"atau masukkan nama alat/file di baris masukan"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Printer berikut terdeteksi otomatis. Konfigurasi printer akan bekerja "
-"otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda "
-"konfigurasi sendiri, jalankan \"Konfigurasi manual\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Daftar printer terdeteksi otomatis. Pilihlah printer yang ingin diset up. "
-"Konfigurasi printer akan bekerja otomatis. Jika printer Anda tak terdeteksi "
-"dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan "
-"\"Konfigurasi manual\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Pilih port tempat printer Anda terhubung atau masukkan nama alat/file di "
-"baris masukan"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Pilihlah port tempat printer Anda terhubung."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Port Paralel: /dev/lp0, /dev/lp1, ..., sebanding dengan LPT1:, LPT2:, ..., "
-"printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Pilih/masukkan printer/alat!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Konfigurasi manual"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Apakah printer Anda adalah alat multifungsi dari HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 dengan scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instalasi paket HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Sedang mencek alat dan mengkonfigurasi HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instalasi paket SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Alat multifungsi HP sedang di-scan"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Membuat port printer tersedia utk CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Pembacaan database printer..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Pilihan printer lpd remote"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Untuk memakai printer lpd remote, berikan nama host\n"
-"server printer dan nama printer di server tsb."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nama host remote"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nama printer remote"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nama host remote hilang!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nama printer remote hilang!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Pilihan printer SMB (windows 95/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Untuk mencetak ke printer SMB, berikan nama host SMB (Catatan! Mungkin "
-"berbeda dengan nama host TCP/IP) dan mungkin alamat IP server printer, nama "
-"share printer yang ingin Anda akses, juga nama user, katasandi, dan info "
-"workgroup."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Host server SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP server SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nama share"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Workgroup"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Harus ada nama/IP server!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Nama share Samba hilang!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Pilihan printer NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Jika ingin mencetak pakai printer NetWare, berikan nama server printer "
-"NetWare (tak selalu sama dengan nama TCP/IPnya) juga nama antrian printer "
-"yang ingin digunakan beserta nama user dan katasandinya."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server Printer"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nama antrian printer"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Nama server NCP hilang!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nama antrian NCP hilang!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Opsi Printer TCP/Soket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Untuk mencetak ke printer soket, berikan nama host printer (dan nomor "
-"portnya). Nomor port server HP JetDirect biasanya 9100, server lain "
-"bervariasi. Lihat manual perangkat keras Anda."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nama host printer"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nama host printer hilang!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Device Printer URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Anda dapat menset langsung URI utk akses printer. URI harus memenuhi "
-"spesifikasi CUPS/Foomatic. Ingat, tak semua tipe URI di-support oleh semua "
-"spooler."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Harus diisi URI valid!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Tiap printer perlu nama (misalnya \"printer\"). Kolom Penjelasan / Lokasi "
-"tak harus terisi. Itu komentar utk user."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nama Printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Keterangan"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokasi"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Persiapan database printer ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model printer Anda"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake telan membandingkan nama model printer terdeteksi dengan daftar "
-"model di database untuk menemukan yang paling cocok. Ini mungkin salah, "
-"khususnya jika printer Anda tak terdaftar di semua database. Periksa apakah "
-"pilihan sudah benar dan klik \"Model sudah benar\", jika salah, klik \"Pilih "
-"model secara manual\" sehingga Anda dapat memilih model printer Anda secara "
-"manual di layar berikut.\n"
-"\n"
-"Printerdrake telah menemukan:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Model sudah benar"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Pilih model secara manual"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Seleksi model printer"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Anda punya model printer mana?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Periksa apakah Printerdrake mendeteksi otomatis model printer Anda dengan "
-"benar. Cari model yang benar di daftar jika kursor menunjukkan model yang "
-"salah atau di \"Printer telanjang\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Jika printer Anda tak terdaftar, pilih yang kompatibel (lihat manual) atau "
-"yang mirip."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Konfigurasi winprinter OKI"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Anda sedang melakukan konfigurasi winprinter laser OKI. Printer ini memakai "
-"protokol komunikasi khusus dan karenanya bekerja hanya saat terhubung port "
-"paralel pertama. Bila printer Anda terhubung dg port lain atau dengan kotak "
-"server cetak hubungkan printer dg port paralel pertama sebelum melakukan tes "
-"cetak. Jika tidak, printer takkan bekerja. Setting tipe koneksi Anda akan "
-"diabaikan oleh driver."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Konfigurasi Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Driver printer inkjet yg disediakan Lexmark hanya men-support printer lokal, "
-"bukan printer di mesin remote atau kotak server cetak. Hubungkan printer "
-"Anda ke port lokal atau konfigurasikan di mesin yang terhubung dengannya."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Agar dapat mencetak dg Lexmark inkjet Anda dan konfigurasi ini, Anda perlu "
-"driver printer inkjet yg disediakan Lexmark (http://www.lexmark.com/). "
-"Masuklah ke situs US dan klik tombol \"Drivers\". Pilih model Anda lalu "
-"sistem operasi \"Linux\". Driver disediakan berupa paket RPM atau shell "
-"script dg instalasi grafis interaktif. Anda tak perlu melakukan konfigurasi "
-"dg frontend grafis. Batalkan langsung setelah persetujuan lisensi.Lalu cetak "
-"halaman printhead alignment dg \"lexmarkmaintain\" dan cocokkan setting head "
-"alignmentdd dg program ini."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Setting standar printer\n"
-"\n"
-"Cek ukuran halaman dan jenis tinta/mode cetak (jika ada) juga konfigurasi "
-"perangkat keras printer laser (memori, unit duplex, tray extra). Ingat, "
-"pencetakan dg kualitas tinggi berjalan amat lambat."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsi %s harus berupa integer!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsi %s harus berupa bilangan!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsi %s keluar batas!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ingin menset printer ini (\"%s\")\n"
-"sbg printer standar?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Halaman tes"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Pilihlah halaman tes yang ingin Anda cetak.\n"
-"Ingat: halaman tes photo perlu waktu lama untuk dicetak. Di printer laser "
-"bermemori rendah itu bahkan takkan muncul. Umumnya cukup halaman tes standar."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Tiada halaman tes"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Cetak"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Halaman tes standar"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Halaman tes alternatif (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Halaman tes alternatif (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Halaman tes foto"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Jangan cetak halaman tes"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Pencetakan halaman tes..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Halaman test telah dikirim ke printer.\n"
-"Akan butuh waktu sebentar untuk mulai mencetak.\n"
-"Status cetak:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Halaman test telah dikirim ke printer.\n"
-"Akan butuh waktu sebentar untuk mulai mencetak.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Bekerja dg baik?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Printer telanjang"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Utk mencetak file dari baris perintah (window terminal) pakailah komando "
-"komando \"%s <file>\" atau alat cetak grafis: \"xpp <file>\" atau \"kprinter "
-"<file>\". Alat grafis memungkinkan Anda memilih printer dan memodifikasi "
-"setting dengan mudah.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Komando ini dapat Anda pakai dalam kotak \"Perintah cetak\" dialog cetak di "
-"banyak aplikasi, tapi jangan berikan nama file di sini karena file yang "
-"dicetak akan diberikan oleh aplikasi.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komando \"%s\" juga memungkinkan modifikasi setting job cetak tertentu. "
-"Tambahkan setting yang diinginkan ke baris perintah, mis. \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Untuk mengetahui opsi printer bacalah daftar di bawah atau klik tombol "
-"\"Daftar opsi cetak\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Daftar opsi cetak tersedia untuk printer ini:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Utk mencetak file dari baris komando (window terminal) gunakan perintah \"%s "
-"<file>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Perintah ini digunakan di kotak \"Perintah cetak\" di dialog cetak beberapa "
-"aplikasi. Tapi jangan berikan nama file di sini karena file yg dicetak akan "
-"diberikan oleh aplikasi.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr "Untuk mendapat daftar opsi printer klik \"Daftar opsi cetak\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Utk mencetak file dari baris komando (jendela terminal) gunakan komando \"%s "
-"<file>\" atau \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Anda juga dapat memakai antarmuka grafis \"xpdq\" untuk setting opsi dan "
-"kontrol job cetak.\n"
-"Jika KDE Anda pakai sbg lingkungan desktop Anda punya ikon \"tombol panik\", "
-"di desktop, berlabel \"STOP Printer!\", yang menghentikan semua job cetak "
-"seketika bila Anda tekan. Ini berguna contohnya saat kertas macet.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komando \"%s\" dan \"%s\" juga memungkinkan modifikasi setting opsi job "
-"cetak tertentu. Tambahkan setting yg diinginkan ke baris perintah, misalnya "
-"\"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Tutup"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Cetak/Scan di \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Pencetakan di printer \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Daftar opsi cetak"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Alat multifungsi HP Anda terkonfigurasi otomatis agar dapat men-scan. Kini "
-"Anda dapat men-scan dg \"scanimage\" (\"scanimage -d hp:%s\" utk menentukan "
-"scanner jika Anda punya beberapa) dari baris perintah atau dg antarmuka "
-"grafis \"xscanimage\" atau \"xsane\". Jika Anda memakai GIMP, Anda dapat "
-"juga men-scan dg memilih titik yg sesuai di menu \"File\"/\"Acquire\". "
-"Panggil \"man scanimage\" dan \"man sane-hp\" di baris perintah "
-"untukinformasi lanjut.\n"
-"\n"
-"Jangan pakai \"scannerdrake\" utk alat ini!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Alat multifungsi HP Anda terkonfigurasi otomatis agar dapat men-scan. Kini "
-"Anda dapat men-scan dari baris perintah dg \"ptal-hp %s scan ...\". Scan via "
-"antarmuka grafis atau GIMP saat ini belum di-support. Info lanjutada di \"/"
-"usr/share/doc/hpoj-0.8/ptal-hp-scan.html\". Jika Anda punya HP LaserJet 1100 "
-"atau 1200 Anda hanya dapat men-scan jika opsi scanner terinstal.\n"
-"\n"
-"Jangan pakai \"scannerdrake\" utk alat ini!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Pembacaan data printer..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transfer konfigurasi printer"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Anda dapat menyalin konfigurasi printer yg Anda buat utk spooler %s ke %s, "
-"spooler Anda sekarang. Semua data konfigurasi (nama printer, keterangan, "
-"lokasi, tipe koneksi, dan setting opsi default) disamakan, tapi job takkan "
-"ditransfer. \n"
-"Tak semua antrian dapat ditransfer karena alasan berikut:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS tak men-support printer server Novell atau printer yg mengirim data ke "
-"perintah format-bebas.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr "PDQ hanya men-support printer lokal, LPD remote, dan Soket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD and LPRng tak men-support printer IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Antrian tak dibuat oleh program ini atau \"foomatic-configure\" tak dapat "
-"ditransfer."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Juga printer yg terkonfigurasi dengan file PPD dari pabrik atau driver CUPS "
-"asli tak dapat ditransfer."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Tandai printer yg ingin Anda transfer lalu klik\"Transfer\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Jangan transfer printer"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transfer"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Printer bernama \"%s\" telah ada di %s. \n"
-"Klik \"Transfer\" untuk menindihnya.\n"
-"Anda juga dapat menuliskan nama baru atau melewatkan printer ini."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Nama printer harus hanya berupa huruf, angka, atau garisbawah"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr "Sudah ada printer \"%s\", Anda benar ingin menindih konfigurasinya?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nama printer baru"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Pemindahan %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Anda telah men-transfer printer standar lama Anda (\"%s\"), Akankah ia juga "
-"dijadikan printer default pada sistem cetak baru %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Penyegaran data printer..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfigurasi printer remote"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Pemulaian network..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfigurasikan jaringan sekarang"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Fungsi network tak dikonfigurasi"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Anda akan melakukan konfigurasi printer remote. Ini memerlukan akses "
-"jaringan aktif, tapi konfigurasi jaringan Anda belum ada. Jika diteruskan "
-"tanpa konfigurasi network, Anda takkan dapat menggunakan printer yang Anda "
-"konfigurasikan sekarang. Bagaimana Anda mau teruskan?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Jalan tanpa konfigurasi jaringan"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Konfigurasi network yang dilakukan saat instalasi kini tak dapat jalan. "
-"Tolong cek apakah network dapat diakses setelah sistem diboot dan betulkan "
-"konfigurasi dengan Pusat Kontrol Mandrake, bagian \"Network & Internet\"/"
-"\"Koneksi\", lalu set printer juga dg Pusat Kontrol Mandrake, bagian "
-"\"Hardware\"/\"Printer\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Akses network tak jalan dan tak dapat dimulai. Cek konfigurasi dan hardware "
-"Anda, lalu coba konfigurasikan printer remote Anda lagi."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Mulai ulang sistem cetak ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "tinggi"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "pengecut"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalasi sistem cetak dalam level keamanan %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Anda akan menginstal sistem cetak %s di sistem dg level keamanan %s.\n"
-"\n"
-"Sistem cetak ini menjalankan daemon (proses background) yang menunggu dan "
-"memproses job cetak. Daemon ini juga dapat diakses oleh mesin remote via "
-"network jadi ia juga bisa jadi sasaran serangan. Karenanya hanya sedikit "
-"daemon terpilih yg dijalankan dlm level sekuriti ini.\n"
-"\n"
-"Benarkah Anda ingin mengkonfigurasikan printer di mesin ini?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Inisiasi sistem cetak pada saat boot"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem cetak (%s) takkan otomatis jalan saat mesin diboot.\n"
-"\n"
-"Sebabnya mungkin auto-start dimatikan sbg implikasi level sekuriti tinggi, "
-"karena sistem cetak potensial diserang.\n"
-"\n"
-"Anda ingin auto-start sistem cetak dinyalakan lagi?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Pemeriksaan perangkat lunak terinstal"
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Hapus LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Hapus LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Pilih spooler printer"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Sistem (spooler) printer mana yang ingin digunakan?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurasi printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instalasi Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opsi printer"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Persiapan PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Konfigurasi aplikasi..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Ingin konfigurasi printer?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistem cetak: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi "
-"setting; membuatnya printer default; atau melihat info tentangnya; atau "
-"membuat printer di server CUPS remote dapat dipakai oleh Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi "
-"setting; membuatnya printer default; atau melihat info tentangnya."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Penyegaran daftar printer (utk menampilkan semua printer CUPS remote)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Ubah sistem cetak"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modus Normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Ingin konfigurasikan printer lain?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modifikasi konfigurasi printer"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Apa yg Anda inginkan utk modifikasi printer ini?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Kerjakan!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tipe koneksi printer"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nama, penjelasan, lokasi printer"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Pembuat, model, driver printer"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Pembuat, model printer"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Set printer ini sebagai standar"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Tambah printer ini ke Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Hapus printer ini dari Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Cetak halaman tes"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Cara penggunaan printer ini"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Hapus printer"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Menghapus printer lama \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Printer standar"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printer \"%s\" kini diset sbg printer standar."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Penambahan printer ke Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Printer \"%s\" sukses ditambahkan ke Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Gagal menambahkan printer \"%s\" ke Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Hapus printer dari Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Printer \"%s\" sukses dihapus dari Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Gagal menghapus printer \"%s\" dari Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Anda ingin menghapus printer \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Menghapus printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfigurasi proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Selamat datang di konfigurator proxy.\n"
-"\n"
-"Anda dapat mengeset proxy http/ftp dengan/tanpa login dan katasandi\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr "Isilah info proxy http, kosongkan jika tak perlu"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url harus berformat 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Bagian port harus berupa angka"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr "Isilah info proxy ftp, kosongkan jika tak perlu"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url harus berformat 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ketik login proxy dan katasandinya, jika ada.\n"
-"Biarkan kosong jika tak ingin login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "katasandi"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "tulis lagi katasandi"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Katasandi tak sama, coba lagi!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Tidak dapat menambah partisi ke RAID md%d yang terformat"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Tidak bisa menulis ke file %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid gagal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid gagal (mungkin raidtoolsnya tak ada?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Partisi tidak cukup untuk level RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Luncurkan sistem suara ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Skeduler command periodik, Anacron"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd digunakan untuk monitoring status batere dan mencatatnya di syslog.\n"
-"apmd juga bisa untuk mematikan mesin waktu baterenya habis."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Menjalankan perintah terjadwal dengan perintah at pada waktu tertentu\n"
-"saat at dijalankan, dan memulai perintah secara batch waktu rata-rata load\n"
-"sedang rendah."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron adalah program UNIX standar yang menjalankan program user\n"
-"pada waktu yang terjadwal. vixie cron memiliki fitur yang lebih lengkap\n"
-"dari cron UNIX biasa, termasuk pembenahan sekuriti yang lebih baik dan\n"
-"lebih mantapnya option pada konfigurasinya."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM memberikan akses ke mouse pada aplikasi Linux yang text based semacam\n"
-"Midnight Commander. Dia juga bisa bikin cut-and-paste dengan mouse pada "
-"konsol\n"
-"dan juga bikin menu pop-up di konsol."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake mendeteksi hardware, dan mengkonfigurasi yg baru/berubah bila "
-"perlu."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache adalah server World Wide Web. Dia dipakai untuk menyediakan file\n"
-"HTML dan CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"daemon superserver internet (biasa dipanggil inetd) bertugas untuk\n"
-"menjalankan servis-servis internet yang dibutuhkan. Dia bertanggung jawab\n"
-"atas banyak server, misalnya telnet, ftp, rsh, dan rlogin. Menonaktifkan\n"
-"inetd berarti menonaktifkan semua servis-servis tadi."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Luncurkan filter paket Linux kernel seri 2.2, untuk set-up\n"
-"firewall yang melindungi mesin Anda dari serangan network."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Paket ini akan meload map keyboard yang dipilih di file\n"
-"/etc/sysconfig/keyboard. Mapnya bisa dipilih dari utility kbdconfig.\n"
-"Mending Anda aktifkan aja deh ini."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regenerasi otomatis header kernel di /boot utk\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Deteksi dan konfigurasi otomatis hardware saat boot."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf kadang bekerja keras saat boot utk perawatan konfigurasi sistem."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd adalah daemon printer yang jadi tulang punggung lpr. Dia\n"
-"bertugas sebagai server yang memberi perintah kepada printer untuk mencetak."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, digunakan utk membangun server dg performans dan\n"
-"kapasitas tinggi."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) adalah Domain Name Server (DNS) yang digunakan untuk "
-"menerjemahkan nama host ke IP address."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mount dan unmount semua Network File System (NFS), SMB (Lan\n"
-"Manager/windows), dan NCP (Netware)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktif/nonaktifkan semua interface network yang terkonfigurasi nyala\n"
-"pada saat boot."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS adalah protokol populer untuk file sharing lewat network TCP/IP.\n"
-"Servis ini dinyalakan untuk membuat NFS server bisa jalan dengan "
-"menggunakan\n"
-"konfigurasi pada file /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS adalah protokol populer untuk file sharing di TCP/IP\n"
-"Servis ini memberikan fungsi file lock pada NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "Secara otomatis nyalakan numlock saat boot pada console/XFree."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Support OKI 4w and winprinter kompatibel."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA digunakan untuk menjalankan perangkat semacam ethernet atau modem "
-"pada laptop.\n"
-"Dia tak bisa jalan kecuali dikonfigurasikan di sini, jadi tak apa-apa\n"
-"kalau tak diinstall di mesin yang tak perlu PCMCIA."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper mengelola koneksi RPC, yang digunakan oleh protokol seperti\n"
-"NFS dan NIS. Server portmap harus jalan di mesin yang bertindak sebagai\n"
-"server untuk protokol yang menggunakan mekanisme RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix adalah Mail Transport Agent, program pengantar surat dari satu ke "
-"lain mesin."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Menyimpan dan mengembalikan pool entropi sistem untuk membuat\n"
-"angka acak dengan kualitas sangat acak."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tunjuk raw device ke block devices (misalnya partisi hard drive),\n"
-"utk digunakan oleg aplikasi semacam Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Daemon routed digunakan untuk update tabel routing IP otomatis liwat\n"
-"protokol RIP. RIP dipakai di jaringan kecil, dan semakin besar jaringannya\n"
-"maka protokol routing yang canggih pun semakin dibutuhkan."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat digunakan pada jaringan untuk mengambil\n"
-"ukuran kinerja sistem di network."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokol ruser digunakan di jaringan untuk mengidentifikasi siapa\n"
-"yang lagi login di jaringan."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokol rwho digunakan untuk melihat daftar user yang sedang login\n"
-"di suatu sistem yang juga menjalankan daemon rwho (mirip dengan finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Aktifkan sistem suara"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog adalah fasilitas yang digunakan para daemon untuk mencatat\n"
-"pesan log sistem di file. Hidupkan aja deh syslognya."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Muat driver piranti USB"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Aktifkan Server Font X (agar XFree dapat berjalan)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Pilih service mana yang hendak dijalankan saat boot scr otomatis"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Pencetakan"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Pemakaian file bersama"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Administrasi remote"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server Database"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servis: %d diaktifkan utk %d tercatat"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servis"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "sedang jalan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "dihentikan"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Services dan daemon"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Mohon maaf, informasi lengkap\n"
-"tentang layanan ini tidak tersedia."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Saat boot"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Mulai"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Terima kasih memilih Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Selamat datang di dunia Source Terbuka"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Sukses MandrakeSoft berdasar prinsip Perangkat Lunak Bebas. OS baru Anda "
-"adalah hasil kerja kolaborasi Komunitas Linux seluruh dunia"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Gabung dunia Perangkat Lunak Bebas"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Cari tahu tentang komunitas Sumber Bebas dan jadi anggota. Belajar, ajari, "
-"dan bantulah sesama dengan bergabung dalam banyak forum diskusi di halaman "
-"web \"Komunitas\" kami"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet dan Pesan"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 menyajikan software terbaik untuk mengakses segala yang "
-"disediakan Internet: Jelajah web & lihat animasi dengan Mozilla dan "
-"Konqueror, tukar email & atur info pribadi Anda dengan Evolution dan Kmail, "
-"dan banyak lagi"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia dan Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 memaksimalkan komputer multimedia Anda! Gunakan software "
-"mutakhir untuk memainkan file music dan audio, edit dan mengatur gambar dan "
-"foto, melihat TV dan video, dan banyak lagi"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Development"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 adalah platform development terampuh. Temukan power "
-"compiler gcc GNU, juga lingkungan development Sumber Bebas terbaik"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Pusat Kontrol Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Pusat Kontrol Mandrake Linux 8.2 adalah tempat terpadu untuk mengkonfigurasi "
-"sistem Mandrake Anda"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Antarmuka user"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 menyediakan 11 lingkungan desktop grafis dan manajer "
-"window termasuk GNOME 1.4, KDE 2.2.2, Window Maker 0.8, dan lain-lain"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Piranti Lunak Server"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Jadikan mesin Anda server powerful dengan hanya beberapa klik mouse: server "
-"Web, email, firewall, router, server file dan cetak, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Game"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 menyediakan game terbaik Source Terbuka - arcade, aksi, "
-"kartu, olah raga, strategi, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "KampusMandrake"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Inginkah Anda belajar Linux secara mudah, cepat dan gratis? MandrakeSoft "
-"menyediakan training Linux gratis, beserta cara mentes kemajuan Anda, di "
-"KampusMandrake -- pusat training online kami"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "AhliMandrake"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Support kualitas dari Komunitas Linux, dan dari MandrakeSoft, ada di sekitar "
-"pojok. Jika Anda veteran Linux, jadilah \"Ahli\" dan bagilah pengetahuan "
-"Anda di situs web support kami"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "KonsultasiMandrake"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Untuk semua proyek IT, konsultan kami siap menganalisa kebutuhan Anda dan "
-"menyediakan solusi pilihan. Hasil pengalaman total MandrakeSoft sebagai "
-"produser Linux menyediakan Teknologi Informasi sesungguhnya untuk organisasi "
-"bisnis Anda"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "TokoMandrake"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Solusi Linux lengkap, termasuk sajian khusus produk dan 'goodies', tersedia "
-"online di e-store kami"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Untuk info lebih lanjut tentang Servis Profesional MandrakeSoft dan sajian "
-"komersial, lihat halaman web berikut:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instalasi paket..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Saya tak bisa baca tabel partisi, udah hancur lebur nih :(\n"
-"Aku akan coba hapus partisi yg jeleknya"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Ada Kesalahan"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "File image `%s' tak ditemukan."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Konfigurasi Instalasi Otomatis"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Konfigurasi disket Instalasi Otomatis akan dilakukan. Fitur ini agak "
-"berbahaya dan harus hati-hati digunakan.\n"
-"\n"
-"Dg fitur ini, Anda akan dapat mengulang instalasi yang Anda terapkan pada "
-"komputer ini, sementara pada beberapa tahapan akan ada pertanyaan interaktif "
-"untuk mengubah nilainya.\n"
-"\n"
-"Utk keamanan maximum, proses partisi dan format takkan pernah dijalankan\n"
-"secara otomatis, apapun yg Anda pilih selama instalasi komputer ini.\n"
-"\n"
-"Jalan terus?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Konfigurasi Step Otomatis"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Pada tiap tahapan pilih apakah instalasi akan diulang, atau akan manual"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Selamat Datang.\n"
-"\n"
-"Parameter instalasi otomatis tersedia di bagian sebelah kiri"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Selamat!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr "Floppy sukses dibuat. Instalasi bisa direplikasi."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Instalasi Otomatis"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Tambah item"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Hapus item terakhir"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      Laporan DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      Laporan Daemon DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    Detil Laporan DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "total kemajuan"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup file sistem..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "File Backup Hard Disk..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Backup file User..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Kemajuan Backup Hard Disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Backup file lain..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"daftar file dikirim oleh FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) problem koneksi FTP: Gagal mengirim file backup dengan FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Kesalahan saat pengiriman surat. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Pilihan File"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Pilih file atau direktori dan klik 'Tambah'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Periksa semua opsi yang Anda inginkan.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Opsi ini memungkinkan backup / simpan ulang semua file di direktori /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Backup file System Anda. ( direktori /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Pakai backup incremental (tidak menghapus backup lama)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Tidak memasukkan file penting (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Dengan opsi ini Anda dapat menyimpan ulang semua versi direktori /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Periksa semua user yang ingin Anda masukkan ke backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Jangan masukkan cache browser"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Pakai Backup Incremental (tidak menghapus backup lama)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Hapus Pilihan"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "User"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Pakai koneksi FTP utk backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Masukkan nama host atau IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Masukkan direktori utk\n"
-" meletakkan backup di host ini."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Masukkan login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Masukkan katasandi"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Ingat katasandi ini"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Koneksi FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Koneksi Aman"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Pakai CD/DVDROM utk backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Pilih ruang CD Anda"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Periksa apakah Anda menggunakan media CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Cek apakah Anda ingin menghapus CDRW sebelum"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Cek jika Anda ingin memasukkan\n"
-" boot instalasi di CD Anda."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Masukkan nama alat Penulis CD Anda\n"
-" mis: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Gunakan pita utk backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Masukkan nama alat utk backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Masukkan ukuran maximum\n"
-" yg diizinkan utk Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Masukkan direktori utk penyimpanan:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Pakai quota utk file backup."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Jaringan"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "perjam"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "harian"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "mingguan"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "bulanan"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Pakai daemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Pilih interval waktu backup"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Pilih media backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Pakai Hard Drive dg daemon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Pakai FTP dg daemon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Pastikan daemon cron masuk dalam daftar servis."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Kirim laporan mail setelah tiap backup ke :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Apa"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Mana"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kapan"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Opsi Tambahan"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Konfigurasi Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Pilih tempat backup"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "di Hard Drive"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "lewat Network"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Pilih apa yang akan di-backup"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Backup sistem"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Backup User"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Pilih user secara manual"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sumber Backup: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- File Sistem:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- File User:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- File Lain:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Simpan di Hard drive di path : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Simpan di FTP di host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t name user: %s\n"
-"\t\t di path: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opsi:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tJangan masukkan File Sistem\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackup dengan tar dan bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackup dengan tar dan gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Cakupan daemon (%s) :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard drive.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Network dg FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Network dg SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Tiada konfigurasi, mohon klik Dukun atau Lanjutan.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Daftar data simpan ulang:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Daftar data rusak:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Mohon uncheck atau hapus nanti."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "File backup rusak"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Semua data terpilih telah                     "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Berhasil Disimpan Ulang di %s    "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Simpan Ulang Konfigurasi    "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK utk simpan ulang file lain."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Daftar user simpan ulang (hanya tanggal terakhir per user yg penting)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Backup file sistem sebelum:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "pilih tanggal simpan ulang"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Pakai Hard Disk utk backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Simpan ulang dari Hard Disk."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Masukkan direktori tempat backup disimpan"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Pilih media lain utk disimpan ulang"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Media Lain"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Simpan ulang sistem"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Simpan ulang User"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Simpan ulang Lain-lain"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "pilih path utk simpan ulang (selain / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Lakukan backup baru sebelum simpan ulang (hanya utk backup incremental.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Hapus direktori user sebelum simpan ulang."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Simpan ulang semua backup"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Simpan ulang pilihan sendiri"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pertolongan"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Sebelumnya"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Simpan"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Bangun Backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Simpan ulang"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Lanjut"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Buatlah backup sebelum menyimpan ulang...\n"
-" atau pastikan path utk menyimpan sudah benar."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Error saat sendmail\n"
-"  surat laporan Anda tak terkirim\n"
-"  Mohon konfigurasikan sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Daftar Paket yang akan diinstal"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Error saat pengiriman file via FTP.\n"
-" Betulkan konfigurasi FTP Anda."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Pilih data utk disimpan ulang..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Pilih media backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Pilih data backup..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Tiada file konfigurasi \n"
-"Mohon klik Dukun atau Lanjutan"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Sedang dibangun ... tunggu."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup file sistem"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup file user"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup file lain"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Total Kemajuan"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "file dikirim dg FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Kirim file..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Daftar data utk dimasukkan ke CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Masukkan kecepatan penulis cd"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Masukkan nama alat Penulis CD (mis: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Cek jika Anda ingin memasukkan boot instalasi ke CD"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Backup Sekarang dari file konfigurasi"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Lihat Konfigurasi Backup."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Konfigurasi Dukun"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Konfigurasi Lanjutan"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Backup Sekarang"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"penjelasan opsi:\n"
-"\n"
-" Di tahap ini Drakbackup mengizinkan Anda mengubah:\n"
-"\n"
-" - Mode kompresi:\n"
-"    \n"
-"      Jika Anda pilih kompresi bzip2, Anda akan mengkompres\n"
-"      data lebih baik daripada gzip (sekitar 2-10 %).\n"
-"      Opsi ini bukan standar karena\n"
-"      banyak makan waktu (sekitar 1000% lebih).\n"
-" \n"
-" - Mode update:\n"
-"\n"
-"      Opsi ini akan mengupdate backup Anda, tapi tak\n"
-"      benar-benar berguna karena Anda perlu\n"
-"      mengurai backup Anda sebelum dapat meng-update.\n"
-"      \n"
-" - mode .backupignore:\n"
-"\n"
-"      Seperti cvs, Drakbackup akan mengabaikan semua referensi\n"
-"      tertulis dalam file .backupignore di tiap direktori.\n"
-"      mis: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Beberapa error saat sendmail disebabkan oleh \n"
-" konfigurasi buruk postfix. Utk mengatasinya \n"
-" myhostname atau mydomain di /etc/postfix/main.cf harus diset\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"penjelasan opsi:\n"
-"\n"
-" - Backup file sistem:\n"
-"       \n"
-"\tOpsi ini dapat mem-backup direktori /etc, yg berisi\n"
-"\tsemua file konfigurasi. Hati-hati saat tahap restore\n"
-"\t(simpan ulang) agar tak menindih:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup file User: \n"
-"\n"
-"\tDengan opsi ini Anda dapat memilih user yg ingin \n"
-"\tAnda backup.\n"
-"\tUntuk menghemat ruang disk, cache browser web harap \n"
-"\ttak dimasukkan.\n"
-"\n"
-" - Backup file Lain: \n"
-"\n"
-"\tOpsi ini memungkinkan Anda menambah data utk disimpan.\n"
-"\tDengan backup lain-lain Anda sementara tak dapat \n"
-"\tmemilih backup incremental.\t\t\n"
-" \n"
-" - Backup Incremental:\n"
-"\n"
-"\tIni adalah opsi terkuat backup. Anda dapat mem-backup \n"
-"\tsemua data pertama kali, setelah itu hanya yang berubah.\n"
-"\tKemudian Anda akan dapat, saat tahap restore, menyimpan\n"
-"\tulang data dari tanggal yg ditentukan date.\n"
-"\tJika Anda belum memilih opsi ini semua backup lama akan \n"
-"\tdihapus sebelum tiap backup.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"penjelasan restore:\n"
-" \n"
-"Hanya tanggal terkini yang akan dipakai, karena dg backup incremental \n"
-"diperlukan restore satu demi satu tiap backup lama.\n"
-"\n"
-"Jadi jika Anda tak suka simpan ulang user lepaslah pilihan semua kotak\n"
-"tandanya.\n"
-"\n"
-"Jika tidak, Anda dapat memilih hanya satu opsi\n"
-"\n"
-" - Backup Incremental:\n"
-"\n"
-"\tBackup incremental adalah opsi terkuat backup,\n"
-"\tAnda dapat mem-backup semua data pertama kali,\n"
-"\tdan kemudian hanya yg berubah.\n"
-"\tJadi Anda dapat, saat tahap restore, menyimpan\n"
-"\tulang data Anda dari tanggal yg ditentukan.\n"
-"\tJika Anda belum memilih opsi ini semua backup\n"
-"\tlama akan dihapus sebelum tiap backup.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Haksalin (C) 2001 MandrakeSoft oleh DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Program ini gratis; Anda dapat menyebar ulang dan/atau mengubah\n"
-" menurut Lisensi Publik Umum GNU dari the Free Software Foundation; baik\n"
-" versi 2, atau yang lebih baru.\n"
-"\n"
-" Program ini disebar agar dapat berguna, tapi TANPA GARANSI APAPUN; bahkan\n"
-" tanpa garansi sebagai implikasi DAGANG atau KELAYAKAN UNTUK KEGUNAAN\n"
-" TERTENTU. Info lebih lanjut ada di Lisensi Publik Umum GNU.\n"
-"\n"
-" Anda mestinya sudah menerima salinan Lisensi Publik Umum GNU dari program\n"
-" ini; jika tidak, tulis ke the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Penjelasan:\n"
-"\n"
-"  Drakbackup digunakan untuk membackup system Anda.\n"
-"  Selama konfigurasi Anda dapat memilih: \n"
-"\t- File System, \n"
-"\t- File User, \n"
-"\t- File Lain-lain.\n"
-"\tatau Seluruh sistem ...  dan Lain-lain (mis. partisi Windows)\n"
-"\n"
-"  Drakbackup dapat melakukan backup system di:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (dg autoboot, rescue dan autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup dapat menyimpan ulang (restore) sistem Anda ke\n"
-"  direktori pilihan user.\n"
-"\n"
-"  Per default semua backup ditempatkan di direktori\n"
-"  /var/lib/drakbackup\n"
-"\n"
-"  File konfigurasi:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Tahap Restore:\n"
-"  \n"
-"  Saat tahap restore, DrakBackup akan menghapus \n"
-"  direktori asli Anda dan mencek bahwa semua file \n"
-"  backup tak rusak. Disarankan Anda melakukan \n"
-"  backup sebelum menyimpan ulang.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"penjelasan opsi:\n"
-"\n"
-"Hati-hati menggunakan backup ftp, karena hanya backup yg telah \n"
-"dibangun yg akan dikirim ke server. Jadi sementara Anda perlu \n"
-"membangun backup di harddrive Anda sebelum mengirimnya ke server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problem Restore Backup:\n"
-"\n"
-"Saat tahap restore, Drakbackup akan mencek semua file\n"
-"backup sebelum menempatkannya kembali. Sebelum restore,\n"
-"Drakbackup akan menghapus direktori asli Anda, dan Anda\n"
-"akan kehilangan semua data. Hati-hati dan jangan mengubah\n"
-"file data backup secara manual.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Penjelasan:\n"
-"\n"
-"  Drakbackup digunakan utk mem-backup sistem Anda.\n"
-"  Saat konfigurasi Anda dapat memilih \n"
-"\t- File Sistem, \n"
-"\t- File User, \n"
-"\t- File Lain-lain.\n"
-"\tatau Seluruh sistem ...  dan Lain-lain (mis. partisi Windows)\n"
-"\n"
-"  Drakbackup dapat mem-backup sistem di:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (dg autoboot, rescue dan autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup dapat menyimpan ulang sistem Anda ke\n"
-"  direktori pilihan user.\n"
-"\n"
-"  Per default semua backup akan ditempatkan di\n"
-"  direktori /var/lib/drakbackup\n"
-"\n"
-"  File konfigurasi:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Tahapan Restore:\n"
-"  \n"
-"  Saat tahap restore, Drakbackup akan menghapus\n"
-"  directory asli dan mencek bahwa semua file backup\n"
-"  tak rusak. Disarankan Anda melakukan backup\n"
-"  terakhir sebelum menyimpan ulang.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalasi %s gagal. Ada kesalahan berikut:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Cari font terinstal"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Lepas pilih font terinstal"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "baca semua font"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "tiada font ditemukan"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "selesai"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "tak ditemukan font di partisi termount"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Pilih ulang font yg benar"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "gagal temukan font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Cari font di daftar instalasi"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copy font"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalasi font True Tupe"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "tunggu saat ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Instalasi True Type selesai"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konversi font"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "bangun type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "referensi Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "konversi font ttf"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "konversi font pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Sembunyikan file temporer"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Jalankan ulang XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Sembunyikan File Font"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "jalankan ulang xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Sebelum menginstl font, Anda harus punya hak memakai dan menginstalnya di "
-"sistem Anda.\n"
-"\n"
-"-Anda dapat menginstal font dengan cara normal. Terkadang, font palsu dapat "
-"membuat server X Anda hang."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Impor Font"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Ambil Font Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Buang Font"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Opsi Lanjutan"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Daftaf Font"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Pilih aplikasi yang mensupport font :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Printer Generik"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Pilih file font atau direktori dan klik 'Tambah'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Daftar Instalasi"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "klik di sini jika Anda yakin."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "di sini jika tidak."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Semua tak dipilih"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Semua Dipilih"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Hapus Daftar"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Tes Awal"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Salin font di sistem Anda"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instal & konversikan Font"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Instalasi Akhir"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Hapus font di sistem Anda"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Un-Instalasi Akhir"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Pemakaian Bersama Koneksi Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Pemakaian Bersama Koneksi Internet telah aktif"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfigurasi Internet Connection Sharing telah seleasi.\n"
-"Namun sekarang sudah aktif.\n"
-"\n"
-"Apa yang ingin Anda lakukan?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "matikan"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "tutup"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "konfigurasi ulang"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Server-server sedang dimatikan"
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internet Connection Sharing telah dimatikan"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet Connection Sharing masih dimatikan"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfigurasi Internet Connection Sharing telah seleasi.\n"
-"Namun sekarang masih dimatikan.\n"
-"\n"
-"Apa yang ingin Anda lakukan?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktifkan"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Server-server akan dinyalakan"
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internet Connection Sharing sudah aktif"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Komputer ini bisa dikonfigurasikan agar bisa membagi koneksi Internetnya.\n"
-"Dengan cara ini, komputer lain di jaringan lokal bisa menggunakn koneksi\n"
-"Internet milik komputer ini.\n"
-"\n"
-"Perhatikan: Anda mesti punya adapter jaringan untuk mensetup Local Area "
-"Network (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (pakai module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Antarmuka %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Tidak ada adaptor jaringan di sistem ini!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Tiada adapter jaringan ethernet terdeteksi. Jalankan konfigurator hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Antarmuka jaringan"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Hanya ada satu adapter jaringan yang dikonfigurasikan di sistem ini:\n"
-"\n"
-"%s\n"
-"\n"
-"Apakah Anda mau melakukan setup Local Area Network untuk adapter itu?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Silakan pilih adapter jaringan yang hendak disambung ke Local Area Network "
-"Anda."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Antarmuka network telah dikonfigurasi"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Awas, adaptor network (%s) telah terkonfigurasikan.\n"
-"\n"
-"Anda ingin konfigurasi ulang otomatis?\n"
-"\n"
-"Anda dapat melakukannya secara manual tapi Anda perlu tahu yg Anda kerjakan."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Konfigurasi ulang otomatis"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Tampilkan konfigurasi antarmuka"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Konfigurasi `%s':\n"
-"\n"
-"Network: %s\n"
-"Alamat IP: %s\n"
-"Atribut IP: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Konfigurasi Anda dapat dipakai dengan anggapan Anda telah menset up server "
-"DHCP; tolong periksa apakah Network Kelas-C jaringan lokal Anda terbaca "
-"dengan benar; Konfigurasi ulang takkan dilakukan dan konfigurasi server DHCP "
-"takkan disentuh.\n"
-"\n"
-"Atau, antarmuka dan server DHCP dapat dikonfigurasikan (lagi).\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Jaringan Lokal Kelas-C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP Server DHCP (Ini)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Konfigurasi ulang antarmuka dan server DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Jaringan Lokal tak berakhiran `.0', keluar."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ada potensi konflik alamat LAN pada konfigurasi %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Konfigurasi firewall terdeteksi!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Awas! Ada konfigurasi firewall yang sudah ada nih. Anda nanti perlu mengecek "
-"dan membetulkan dengan cara manual setelah instalasi."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurasi..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Mengkonfigurasikan skrip, menginstall software, menjalankan server..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem instalasi paket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Semuanya sudah dikonfigurasikan.\n"
-"Anda sekarang bisa membagi koneksi Internet dengan komputer-komputer lain "
-"pada Local Area Network di tempat Anda, dengan menggunakan konfigurasi "
-"jaringan otomatis (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurasi telah seleasi.Namun sekarang masih dimatikan."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurasi telah selesai.Namun sekarang sudah aktif."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internet Connection Sharing belum pernah dikonfigurasikan"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Koneksi dan konfigurasi sharing Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Selamat datang di utiliti Internet Connection Sharing!\n"
-"\n"
-"%s\n"
-"\n"
-"Silakan pencet Konfigurasikan untuk mulai."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfigurasi Jaringan (adapter %d)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Hapus profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil yang hendak dihapus:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Buat profil baru..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nama profil yg akan dibuat (profil baru dibuat sbg salinan yg sekarang) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nama Host: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Akses Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipe: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface: "
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status: "
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Tunggu"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurasi Akses Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "konfigurasi LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurasi Local Area Network..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klik di sini utk meluncurkan wizard ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Wizard..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Pasang"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Tunggu ya, sedang mengaktifkan konfigurasi"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Tersambung"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Tak tersambung"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Sambungkan..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Koneksi diputus"
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "Awas, koneksi Internet lain terdeteksi, mungkin memakai jaringan Anda"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Tiada interface terkonfigurasi.\n"
-"Konfigurasi dulu dg meng-klik 'Configure'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "konfigurasi LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protokol Boot"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Dijalankan saat boot"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Klien DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktifkan sekarang"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "non-aktifkan sekarang"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Antarmuka ini belum dikonfigurasikan.\n"
-"Luncurkan dukun konfigurasi di window utama"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Tiada koneksi internet.\n"
-"Buat dulu dg meng-klik 'Configure'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "konfigurasi koneksi Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "konfigurasi koneksi Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipe koneksi"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameter"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Card Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Klien DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Pilih tingkat keamanan"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Pusat Kontrol"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Pilih tool yang hendak digunakan"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "AS (siaran)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "AS (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "AS (kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Cina (siaran)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Jepang (siaran)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Jepang (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Eropa Timur"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlandia"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Eropa Barat"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Selandia Baru"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Afrika Selatan"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Tolong,\n"
-"tuliskan standar dan daerah tv Anda"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "standar TV :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Kanal TV sedang di-scan ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Men-scan kanal TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "cara pakai: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Pilih keyboard Anda"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ingin membuat tombol BackSpace menjadi Delete dalam konsol?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Ganti Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Masukkan CDROM Instalasi di drive Anda dan tekan OK\n"
-"Jika tak punya, tekan Batal untuk hindari upgrade live."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Gagal memulai upgrade live !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Perubahan telah dilakukan, Anda harus logout agar perubahan berlaku"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Tampilkan hari terpilih saja"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/B_aru"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/File/_Buka"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/_Simpan"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Simpan _Dengan nama lain"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/File/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Pilihan"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Pilihan/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Help"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Help/_About..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "User"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Pesan"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Penjelasan Piranti Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "cari"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Penampil log Anda"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Setting"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "pencocokan"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "tapi bukan pencocokan"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Pilih file"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Isi file"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Peringatan Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "tunggu, sedang menelaah file: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigurasi peringatan Mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Selamat datang di konfigurator mail/SMS.\n"
-"\n"
-"Anda dapat mengeset sistem peringatan.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "setting servis"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Anda akan menerima peringatan bila salah satu servis terpilih terhenti"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "setting muatan"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Anda akan diperingatkan jika muatan lebih tinggi daripada nilai ini"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "konfigurasi peringatan"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Konfigurasikan cara sistem memperingatkan Anda"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Simpan di..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Tipe mouse yang anda punya?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "tiada serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulasikan tombol ketiga?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s ditemukan di %s, konfigurasikan?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Pilih scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Scanner %s ini tak disupport"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Device boot"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Scanner %s ini harus dikonfigurasikan oleh printerdrake.\n"
-"Anda dapat meluncurkan printerdrake dari Pusat Kontrol Mandrake bagian "
-"Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "konfigurasi firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "konfigurasi firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Anda sudah ada firewall.\n"
-"Silakan tekan Konfigurasikan untuk mengganti atau menghapus firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Silakan tekan Konfigurasikan untuk mensetup firewall standar"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Pilih bahasa Anda"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Pilih kelas instalasi"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Deteksi hard disk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurasi mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Pilih keyboard"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Keamanan"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Setup filesystem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Melakukan format partisi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paket yang akan diinstal"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instal sistem"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tambahkan user"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurasi jaringan"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurasi service"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Install bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Membuat bootdisk"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurasi X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instal update sistem"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Keluar dari proses instal"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"konfigurator tinyfirewall\n"
-"\n"
-"Program ini mengkonfigurasi firewall pribadi sistem Linux Mandrake.\n"
-"Untuk membuat solusi firewall yang lebih baik, cobalah\n"
-"distribusi Mandrake Security Firewall"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sekarang saya akan tanyakan layanan mana saja yang hendak Anda bolehkan\n"
-"untuk dapat diakses dari Internet. Silakan fikirkan dulu masak-masak akan\n"
-"hal ini, karena keamanan komputer Anda sangat penting kan.\n"
-"\n"
-"Ayo, bila Anda tidak pakai layanan-layanan ini, matikan saja lewat "
-"firewall.\n"
-"Anda bisa ubah konfigurasikan lagi kapan-kapan dengan menjalankan\n"
-"aplikasi ini lagi nantinya."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Apakah Anda ingin webserver Anda juga dapat diakses dari Internet ??\n"
-"Bila Anda ingin webserver Anda HANYA ingin diakses dari KOMPUTER INI SAJA\n"
-"maka jawab saja TIDAK di sini\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan Name server di komputer ini? Bila Anda\n"
-"tidak menjalankan nameserver untuk menjawab informasi IP dan zone untuk "
-"Internet\n"
-"silakan jawab TIDAK.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Apakah Anda ingin membuka koneksi Secure Shell (ssh) ?\n"
-"SSH adalah pengganti telnet yang mungkin hendak Anda gunakan.\n"
-"Bila Anda hanya menggunakan telnet sekarang, silakan ganti ke ssh.\n"
-"telnet tidak dienkripsi loh -- jadi orang lain bisa mencuri katasandi Anda\n"
-"saat telnet. SSH dienkripsi dan tidak bisa disadap."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Apakah Anda ingin membuka koneksi telnet?\n"
-"Tapi ini sangatlah tidak aman sebagaimana dijelaskan pada layar sebelumnya.\n"
-"Ayo deh jawab TIDAK dan gunakan SSH saja.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Apakah Anda hendak membuka koneksi FTP yang ingin diakses dari Internet?\n"
-"Bila ya, silakan gunakan saja untuk transfer anonimous. Katasandi yang "
-"dikirimkan\n"
-"oleh FTP bisa dicuri oleh cracker, karena FTP tidak diacak saat pertukaran "
-"katasandi terjadi.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan server mail ? Bila Anda mengirimkan email\n"
-"dengan menggunakan pine, mutt, atau klien mail teks, maka sebaiknya iya.\n"
-"Selainnya, matikan saja deh.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Apakah Anda menjalankan server POP atau IMAP ?\n"
-"Fasilitas ini bisa digunakan untuk menampung account email non web untuk\n"
-"umum.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Wah, Anda pakai kernel 2.2 yah... Bila IP jaringan Anda diset sendiri\n"
-"oleh komputer di kantor atau rumah (secara dinamis)\n"
-"maka kita harus jawab YA di sini. Benar tak demikian?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Apakah komputer Anda mendapatkan informasi jam dari komputer lain?\n"
-"Biasanya, fasilitas ini digunakan oleh organisasi sedang/besar Unix/Linux\n"
-"untuk sinkronisasi waktu untuk logging dan sebagainya. Bila Anda\n"
-"tidak tergabung dari kantor yang besar atau belum pernah dengar ini "
-"sebelumnya.\n"
-"jawab TIDAK deh"
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasi tamat. Simpan perubahan ini ke disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Tidak bisa buka %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "error membuka file %s untuk ditulisi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Tidak, tak perlu DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ya, perlu DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Tidak, tak perlu NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ya, perlu NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Jangan Simpan"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Simpan & Keluar"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Dukun Konfigurasi Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Tidak (lindungi dari internet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ya (izinkan ini melewati firewall)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Tunggu, paket terinstal sedang diverifikasi"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Gagal menginstal paket kebutuhan : %s dan Bastille.\n"
-" Coba instal secara manual."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Komputer Jaringan (klien)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "server NFS, SMB, Proxy, SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Aplikasi Perkantoran"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Workstation Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Tool untuk Palm Pilot ataupun Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Workstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nama Domain dan Server Info Network (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Program office: pengolah kata (kword, abiword), spreadsheet (kspread, "
-"gnumeric), viewer pdf,dsb"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Tool untuk audio: player mp3 atau midi, mixer, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Buku dan Howto untuk Linux dan Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Workstation KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Kumpulan tool untuk mail, news, web, transfer file, dan chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Server database PostgreSQL atau MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Tools untuk memudahkan konfigurasi komputer."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Sound"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Peralatan"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentasi"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Alat konsol"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server mail Postfix, server news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Komputer Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Komputer Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "konfigurasi"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Desktop Grafis tambahan (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, lingkungan grafis dasar dg kumpulan tool-tool "
-"yang menyertainya"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Mode Grafis"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache dan Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Tool untuk membuat dan memburn CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Komputer Kantor"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, dsb"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Program Grafis, misalnya The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Librari, program, dan file include untuk pemrograman C dan C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Komputer Server Jaringan"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Komputer Game"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Editor dan Player Video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafis"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Program permainan: arcade, board, strategi, dsb"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Kumpulan tool untuk membaca dan mengirimkan email dan news (pine, mutt, "
-"tin..) dan untuk membrowse Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arsip, emulator, pemantauan"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Keuangan Pribadi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Environment grafis dengan kumpulan aplikasi dan tool desktop yang mudah "
-"digunakan"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klien untuk berbagai protokol, termasuk ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gerbang Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Program untuk memainkan/mengedit suara dan video"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Desktop Grafis lainnya"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editor, shell, tool untuk file, terminal"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Program untuk mengelola keuangan, misalnya gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Pengelolaan Informasi Pribadi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD Burning"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Aplikasi Ilmu pengetahuan"
-
-#~ msgid "About"
-#~ msgstr "Keterangan"
-
-#~ msgid "             Help           "
-#~ msgstr "             Pertolongan    "
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "XawTV belum diinstal,\n"
-#~ "Anda harus menginstalnya.\n"
-#~ " Ketikkan \"urpmi xawtv\""
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Tak dapat mengakses modul kernel yg sesuai dg kernel Anda (file %s hilang)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Tiada"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Pilih satu printer standar!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Terapkan/Baca-ulang printer"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Sekarang Anda boleh berikan parameter untuk module %s."
-
-#~ msgid "Low"
-#~ msgstr "Lemah"
-
-#~ msgid "Medium"
-#~ msgstr "Sedang"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Ada beberapa peningkatan level security, yang utama adalah ada lebih "
-#~ "banyak\n"
-#~ "peringatan dan cek sekuriti yang lebih ketat."
-
-#~ msgid "mount failed"
-#~ msgstr "gagal melakukan mount"
-
-#~ msgid "Boot mode"
-#~ msgstr "Mode boot"
-
-#~ msgid "Export"
-#~ msgstr "Ekspor"
-
-#~ msgid "click here"
-#~ msgstr "klik di sini"
-
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Untuk mengetahui opsi yg tersedia untuk printer ini bacalah daftar "
-#~ "berikut atau klik tombol \"Daftar opsi cetak\". %s\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr "Scanner %s memakai port paralel, yg tak disupport saat ini"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux mengatur jam dengan GMT atawa \"Greenwich Mean Time\" dan \n"
-#~ "menterjemahkannya ke waktu lokal sesuai dengan timezone yang Anda pilih."
-
-#~ msgid ""
-#~ "You may choose to upload updated packages that have been released after "
-#~ "the\n"
-#~ "distribution has been made available. You will get security fixes or bug\n"
-#~ "fixes, but you need to have an Internet connection configured to "
-#~ "proceed.\n"
-#~ "Answer \"Yes\" to the dialog to choose an available mirror. After "
-#~ "choosing\n"
-#~ "a mirror, a packages selection tree appears to allow you to choose "
-#~ "packages\n"
-#~ "individually, package that need to be updated are already selected, but "
-#~ "you\n"
-#~ "may choose to install other package or deselect packages. Press \"Install"
-#~ "\"\n"
-#~ "to install the updated package or \"Cancel\" not to upgrade them. (this\n"
-#~ "*REALLY* need to be modified according to real DrakX, if you need other\n"
-#~ "help section, let us (DrakX team developer) known)."
-#~ msgstr ""
-#~ "Anda dapat memilih upload paket terupdate yg dirilis setelah distribusi\n"
-#~ "tersedia. Anda akan mendapat fix keamanan atau kutu, tapi Anda perlu "
-#~ "punya\n"
-#~ "koneksi Internet terkonfigurasi untuk melanjutkan proses. Jawab \"Ya\" "
-#~ "pada\n"
-#~ "dialog untuk memilih mirror. Setelah memilih mirror, pohon seleksi paket\n"
-#~ "muncul agar Anda dapat memilih paket sendiri, paket yg perlu diupdate "
-#~ "telah\n"
-#~ "dipilihkan, tapi Anda dapat menginstal paket lain / melepas pilihan "
-#~ "paket.\n"
-#~ "Tekan \"Instal\" utk menginstal update paket atau \"Batal\" utk keluar.\n"
-#~ "(ini *BENAR-BENAR* perlu dimodifikasi menurut DrakX nyata, jika Anda "
-#~ "perlu\n"
-#~ "pertolongan lain, beritahu kami tim developer DrakX)."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Sambungkan koneksi Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Putuskan koneksi Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigureasikan koneksi jaringan (LAN atau Internet)"
-
-#~ msgid "authentification"
-#~ msgstr "otentifikasi"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Men-scan sumberdaya umum nfs yg tersedia"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Men-scan sumberdaya umum nfs yg tersedia di server %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Scan sumberdaya umum samba yg tersedia"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Scan sumberdaya umum samba yg tersedia di server %s"
-
-#~ msgid "Removable media"
-#~ msgstr "Media removable"
-
-#~ msgid "Active"
-#~ msgstr "Aktif"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Printer dengan tipe \"%s\" telah terdeteksi di "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Alat printer lokal"
-
-#~ msgid "Printer Device"
-#~ msgstr "Device Printer"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Nama device/file hilang!"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Printer di server CUPS remote"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Printer di server remote"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Mulai koneksi..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Tutup koneksi..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Koneksi belum ditutup.\n"
-#~ "Cobalah lakukan secara manual sebagai root lalu ketikkan\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down"
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sistem ini sekarang diputus koneksinya"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Pilih ukuran yang akan diinstal"
-
-#~ msgid "Total size: "
-#~ msgstr "Ukuran total: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Silakan tunggu, "
-
-#~ msgid "Total time "
-#~ msgstr "Total waktu "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Gunakan konfigurasi X11 yang ada?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Device mana yang terhubung ke printer\n"
-#~ "(ingat, /dev/lp0 = LPT1:) ?\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Awas, adaptor jaringan sudah dikonfigurasikan. Akan dikonfigurasikan lagi."
-
-#~ msgid "New"
-#~ msgstr "Baru"
-
-#~ msgid "Remote"
-#~ msgstr "Remote"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "Klik tombol di atas\n"
-#~ "\n"
-#~ "Atau gunakan \"Baru\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "Gunakan \"Baru\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr ""
-#~ "Jika daftar di atas tak memuat isian yg diinginkan, masukkan di sini:"
-
-#~ msgid "Shared resource"
-#~ msgstr "Sumberdaya umum"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Tak jelas (%s), coba lebih detil\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (default %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Pilihan Anda? (default %s  pilih 'none' untuk tidak ada) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "gagal baca file /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Anda ingin restart network?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Setuju?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Saya akan me-restart device jaringan ini:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Device jaringan %s akan di-restart. Setuju ?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Kecuali Anda tahu yg lain, umumnya dipilih \"/dev/hda\"\n"
-#~ "(disk IDE master primer) atau \"/dev/sda\" (disk SCSI pertama)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Printer berikut telah dikonfigurasi.\n"
-#~ "Anda boleh tambahkan atau mengubah yang sudah ada."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Timeout koneksi (detik) [ beta, belum diterapkan ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Gagal set \"%s\" sbg printer default!"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Silakan tes mouse Anda"
-
-#~ msgid "Press next to continue."
-#~ msgstr "Tekan Lanjutkan utk melanjutkan"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Pilihlan bahasa yang ingin Anda gunakan untuk instalasi dan sistem."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Anda harus menerima ketentuan dalam lisensi di atas untuk melanjutkan "
-#~ "proses instalasi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Silakan tekan \"Terima\" bila Anda setuju dengan persyaratan di atas.\n"
-#~ "\n"
-#~ "\n"
-#~ "dan silakan tekan \"Tolak\" bila Anda tidak setuju. Proses instalasi akan "
-#~ "dihentikan tanpa mengubah konfigurasi yang sudah ada."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Pilih layout keyboard yg dipakai dari daftar di atas"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Bila Anda menginginkan bahasa-bahasa lain selain bahasa yang Anda tadi "
-#~ "pilih pada saat setelah instalasi, silakan pilih pada daftar di atas. "
-#~ "Bila Anda mau semuanya, pilih saja \"Semuanya\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Pilih:\n"
-#~ "\n"
-#~ "  - Customized:  Bila Anda familiar dengan Linux, Anda akan dapat\n"
-#~ " memilih penggunaan sistem ini, yaitu normal, development, atau server.\n"
-#~ " Pilih \"Normal\" untuk instalasi secara umum yang biasanya. Atau pilih\n"
-#~ " \"Development\" untuk membuat software dengan Linux Anda, atau pilih\n"
-#~ " \"Server\" bila hendak menginstall server serbaguna (mail, print, dsb)\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ahli    :  Bila Anda sangat dekat dengan GNU/Linux dan ingin\n"
-#~ " menginstall Linux sesuka hati, ini adalah kelas instalasi yang pas\n"
-#~ " untuk Anda, dan Anda bisa memilih penggunaan sistem ini sebagaimana\n"
-#~ " pada kelas \"Customized\". JANGAN COBA-COBA PAKAI MODUS INI KALAU\n"
-#~ " belum cukup makan asam garam di dunia LINUX"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Berikut adalah pilihan penggunaan mesin Anda :\n"
-#~ "\n"
-#~ "*Workstation: pilih ini kalau Anda hendak menggunakan mesin Anda untuk "
-#~ "mengerjakan\n"
-#~ " pekerjaan sehari-hari di kantor atau di rumah\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: pilih ini bila Anda hendak menggunakan mesin ini untuk "
-#~ "pembuatan software.\n"
-#~ " Anda akan saya kasih kumpulan software yang berguna untuk melakukan "
-#~ "kompilasi,\n"
-#~ " debug, dan format source code, atau untuk membuat paket software\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server : Pilih ini bila Anda hendak menggunakan mesin ini sebagai\n"
-#~ " server. Entah itu file server (NFS ataw SMB), print server\n"
-#~ " (pakai protokol Unix lp (Line Printer) atau model windows SMB)\n"
-#~ " authentication server (NIS), database server dsb dsb.\n"
-#~ " Karena itu jangan mengharapken saya menyediakan rupa-rupa\n"
-#~ " software yang ngejreng (KDE,GNOME...) di sini."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Sekarang Anda pilih dulu grup paket yang mau Anda install\n"
-#~ "atau yang mau diupgrade.\n"
-#~ "\n"
-#~ "DrakX sekarang akan cek apakah Anda masih punya sisa space kosong untuk\n"
-#~ "menginstall ini semua, kalau tidak nanti Anda akan diberitahu kok.\n"
-#~ "Tapi kalau Anda mau cuek aja mau install walaupun spacenya tidak cukup\n"
-#~ "gua akan menginstall semua paketnya, tapi ada beberapa paket yang aku "
-#~ "rasa\n"
-#~ "kurang penting akan tidak diinstall. Pada daftar di bawah ini Anda bisa\n"
-#~ "pilih \"Pilih paket sendiri\"; kalau-kalau Anda pingin melihat \n"
-#~ "paket-paket yang ada (ada 1000an lebih...)"
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Anda dapat memilih tiap-tiap paket yang hendak Anda install\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda dapat membuka atau menutup tree dengan mengklik pada pilihan di "
-#~ "sudut kiri pada\n"
-#~ "windows paket\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak melihat daftar paket yang diurut secara alfabet, pilih "
-#~ "ikon \"Togel flat dan urut grup\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda tidak hendak diberitahu tentang dependensi paket, pilih "
-#~ "\"Dependensi otomatis\"\n"
-#~ "Dengan cara ini bila Anda membuang suatu paket, maka paket-paket terkait "
-#~ "lainnya akan dibuang\n"
-#~ "juga secara otomatis tanpa pemberitahuan."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Kalau Anda punya semua CD pada daftar di atas, tekan OK.\n"
-#~ "Kalau tidak punya sama sekali, click Baal.\n"
-#~ "Kalau cuma punya beberapa aja, pilih aja, trus klik Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Anda kini dapat mencoba mouse. Gunakan tombol dan roda utk mencek\n"
-#~ "setting. Jika hasilnya buruk, klik \"Batal\" utk memilih driver lain.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jika Anda sedang menginstal mesin Apple dg mouse 1-tombol, ada "
-#~ "kesempatan\n"
-#~ "mendefinisikan keyboard utk mengemulasi tombol ke-2 dan ke-3.\n"
-#~ "Ini menjadikan Anda dapat mengakses fungsi penuh mouse dalam\n"
-#~ "konsol Linux dan GUI Window X.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jika Anda punya mouse ADB, pilihlah USB, karena kernel Linux akan "
-#~ "melakukan\n"
-#~ "mapping hardware mouse Anda."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Bila Anda hendak menghubungkan komputer ini ke Internet atau ke jaringan\n"
-#~ "lokal, silakan pilih konfigurasi yang benar. Nyalakan perangkat terkait "
-#~ "sebelum\n"
-#~ "memilih konfigurasi agar dapat dideteksi oleh DrakX secara otomatis.\n"
-#~ "\n"
-#~ "\n"
-#~ "BIla anda tidak memiliki koneksi ke Internet atau jaringan lokal, pilih "
-#~ "saja\n"
-#~ "\"Matikan Jaringan\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak mengkonfigurasikan jaringan nanti setelah proses "
-#~ "instalasi selesai,atau bila Anda sudah selesai mengkonfigurasikan koneksi "
-#~ "jaringan, pilih \"Selesai\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Saya tidak dapat menemukan modem di komputer ini. Silakan pilih port "
-#~ "serial mana\n"
-#~ "modem Anda dicolokkan.\n"
-#~ "\n"
-#~ "\n"
-#~ "sebagai misal, port serial pertama (pada Microsoft windows dikenal dengan "
-#~ "\"COM1\")\n"
-#~ "adalah \"ttyS0\" di GNU/Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sekarang Anda bisa memasukan pilihan dialup. Bila Anda tidak tahu\n"
-#~ "atau ragu-ragu, informasi yang benar bisa Anda tanyakan kepada\n"
-#~ "Internet Service Provider tempat Anda berlangganan. Bila Anda tidak\n"
-#~ "memasukan DNS (name server) di sini, informasi tersebut akan\n"
-#~ "saya cari sendiri pada Internet Service Provider Anda saat melakukan "
-#~ "koneksi nanti."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Bila modem yang Anda punya adalah modem eksternal, maka tolong dong "
-#~ "dinyalakan supaya DrakXbisa mendeteksinya secara otomatis."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Silakan nyalakan modemnya dan pilih mana modem yang Anda punya"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Bila Anda tidak yakin dengan informasi di atas apakah benar atau tidak\n"
-#~ "atau bahkan bila Anda sangat tidak tahu atau ragu mau isi apa, tenang "
-#~ "saja\n"
-#~ "informasi di atas bisa Anda tanyakan kepada Internet Service Provider "
-#~ "Anda.\n"
-#~ "Bila Anda tidak mengisi DNS (name server) di sini, nanti akan saya cari "
-#~ "sendiri\n"
-#~ "dari Internet Service Provider saat melakukan koneksi ke Internet."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Anda bisa masukkan nama host Anda sekarang. Bila Anda tidak yakin apa "
-#~ "yang harus dimasukkan,\n"
-#~ "informasi ini bisa diperoleh dari ISP."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Silakan konfigurasikan device jaringan Anda:\n"
-#~ "\n"
-#~ "  * Alamat IP: Kalau Anda tak tahu, tanyakan sana pada network "
-#~ "administratornya.\n"
-#~ "     Jangan masukkan alamat IP kalau Anda pilih \"IP Otomatis\" di "
-#~ "bawah.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Netmask: Pilih aja \"255.255.255.0\", kecuali kalau ragu tanya juga "
-#~ "ke\n"
-#~ " network administratornya.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - IP otomatis: Bila network Anda menggunakan bootp atau protokol dhcp, "
-#~ "pilih\n"
-#~ " ini. Bila Anda pilih ini, tak usah masukkan alamat IP di \"Alamat IP\". "
-#~ "Bila\n"
-#~ " Anda ragu juga, tanya lagi ke network administrator."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Anda sekarang bisa memasukan nama host. Bila Anda tidak tahu atau ragu\n"
-#~ "silakan kontak network administrator Anda saja."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Sekarang Anda boleh memasukan nama host. Bila tidak tahu\n"
-#~ "atau tidak pasti, kosongkan saja deh."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Anda bisa masukkan dialup sekarang. Bila Anda tak yakin apa yang harus "
-#~ "dimasukkan,\n"
-#~ "informasi ini bisa diperoleh dari ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Bila Anda mau pakai proxy, sekarang saatnya untuk mengkonfigurasi. Bila "
-#~ "Anda\n"
-#~ "tak tahu pakai proxy apa tak, tanya gih ke network administratornya atau "
-#~ "ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Anda bisa install paket kriptografi bila koneksi Internet Anda telah\n"
-#~ "dikonfig dengan benar. Sekarang pilih mirror tempat Anda ingin download\n"
-#~ "paket kriptografinya dan kemudian pilih paketnya.\n"
-#~ "\n"
-#~ "Perhatikan bahwa Anda harus pilih mirror dan kriptografi sesuai "
-#~ "ketentuan\n"
-#~ "yang berlaku di daerah Anda."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Sekarang pilih zonawaktu tempat Anda tinggal"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Sekarang Anda bisa mengkonfigurasikan printer lokal (terhubung ke "
-#~ "komputer Anda) atau\n"
-#~ "printer remote (yang diakses via jaringan Unix, Netware, atau Microsoft "
-#~ "windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Bila Anda ingin dapat mencetak, silakan pilih sistem cetak CUPS atau LPR\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS adalah sistem cetak baru dan powerfull di Unix (CUPS = \"Common "
-#~ "Unix\n"
-#~ "Printing System\"). Ini adalah sistem cetak standar Linux Mandrake.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR adalah sistem cetak kuno, masih dipakai pada versi lama Linux "
-#~ "Mandrake.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda tak punya printer, pilih \"Tidak Ada\""
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux dapat menggunakan berbagai jenis printer. Tiap-tiap tipe "
-#~ "memerlukan setup\n"
-#~ "yang berbeda\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila printer tersambung secara fisik dalam komputer ini, pilih\n"
-#~ "\"Printer Lokal\". \n"
-#~ "\n"
-#~ "Bila Anda menggunakan printer Unix jarak jauh, pilih\n"
-#~ "\"Printer remote\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Bila Anda hendak menggunakan printer pada mesin Microsoft windows (atau\n"
-#~ "pada mesin Unix dengan SMB), maka pilih \"SMB/WIndows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Silakan nyalakan printer sebelum DrakX mendeteksinya.\n"
-#~ "\n"
-#~ "Anda perlu mengisi beberapa informasi di sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nama printer: spooler cetak menggunakan nama \"lp\" sebagai nama "
-#~ "printer default\n"
-#~ "Jadi Anda pelru punya sebuah printer dengan nama \"lp\". Bila Anda "
-#~ "memiliki cuma \n"
-#~ "satu buah printer saja, Anda bisa menggunakan beberapa nama. Tuliskan "
-#~ "saja nama\n"
-#~ "itu dan pisahkan dengan karakter pipe \"|\". Jadi untuk memberi nama "
-#~ "printer dengan\n"
-#~ "nama yang mudah dimengerti, Anda bisa tuliskan: \"Printer saya|lp\".\n"
-#~ "   Printer yang memiliki \"lp\" pada namanya akan menjadi printer "
-#~ "default.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Deskripsi: ini boleh diisi boleh tidak, tapi bila diisi akan lebih "
-#~ "memudahkan Anda\n"
-#~ "untuk membedakan antara printer bila Anda memiliki printer lebih dari "
-#~ "satu buah atau bila\n"
-#~ "printer ini akan diakses oleh banyak orang.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokasi: Anda bisa menuliskan informasi lebih detil tentang lokasi "
-#~ "printer ini.\n"
-#~ "(misalnya \"Printer yang ada di lantai 2\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Anda perlu memasukkan beberapa informasi di sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nama antrian: spooler cetak menggunakan nama \"lp\" sebagai nama "
-#~ "printer default\n"
-#~ "Jadi Anda pelru punya sebuah printer dengan nama \"lp\". Bila Anda "
-#~ "memiliki cuma \n"
-#~ "satu buah printer saja, Anda bisa menggunakan beberapa nama. Tuliskan "
-#~ "saja nama\n"
-#~ "itu dan pisahkan dengan karakter pipe \"|\". Jadi untuk memberi nama "
-#~ "printer dengan\n"
-#~ "nama yang mudah dimengerti, Anda bisa tuliskan: \"Printer saya|lp\".\n"
-#~ "   Printer yang memiliki \"lp\" pada namanya akan menjadi printer "
-#~ "default.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Direktori Spool: Dalam direktori ini semua job printer akan "
-#~ "disimpan. BIla Anda tidak\n"
-#~ "mengerti biarkan saja terisi dalam nilai defaultnya.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Koneksi Printer: Bila printer tersambung secara fisik dalam komputer "
-#~ "ini, pilih\n"
-#~ "\"Printer Lokal\". Namun bila Anda menggunakan printer Unix jarak jauh, "
-#~ "pilih\n"
-#~ "\"Printer lpd remote\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Bila Anda hendak menggunakan printer pada mesin Microsoft windows "
-#~ "(atau\n"
-#~ "pada mesin Unix dengan SMB), maka pilih \"SMB/WIndows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "   Bila Anda hendak mengakses printer pada jaringan Netware, pilih "
-#~ "\"Netware\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Printer Anda tidak dapat dideteksi. Silakan tuliskan nama device atau di "
-#~ "mana printer Anda\n"
-#~ "tersambung.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sebagai contoh, printer yang disambung ke port paralel pertama komputer "
-#~ "disebut\n"
-#~ "\"/dev/lp0\" pada GNU/Linux, dan disebut \"LPT1\" pada wicrosoft mindows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Anda harus pilih printer yang Anda punya pada daftar di atas."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Silakan pilih konfigurasi yang tepat bergantung tipe printer yang Anda "
-#~ "punya.\n"
-#~ "Silakan baca dokumentasinya bila Anda tidak tahu harus pilih apa di "
-#~ "sini.\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda akan dapat melakukan test pada konfigurasi ini nanti dan bisa juga\n"
-#~ "mengubah konfigurasi ini bila tidak berjalan sebagaimana mestinya."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Sekarang Anda mesti berikan katasandi root untuk\n"
-#~ "sistem Linux-Mandrake ini. Katasandi harus diketikkan dua kali untuk\n"
-#~ "verifikasi bahwa Anda tidak salah ketik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root adalah administrator sistem. Hanya orang yang punya akses ke\n"
-#~ "account administrator saja yang dapat mengatur dan mengelola sistem.\n"
-#~ "Awas, account administrator yang disalahgunakan atau dipakai\n"
-#~ "tanpa izin akan sangat membahayakan integritas sistem, data,\n"
-#~ "dan sistem lain yang terhubung. \n"
-#~ "\n"
-#~ "\n"
-#~ "Katasandi haruslah campuran dari\n"
-#~ "karakter alfanumerik dan panjangnya minimal 8 karakter. Jangan\n"
-#~ "pernah menuliskan katasandi Anda di kertas atau di mana saja. \n"
-#~ "\n"
-#~ "Jangan buat katasandi Anda terlalu panjang atau rumit, nanti bisa lupa."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Jika jaringan Anda memakai protokol otentikasi LDAP/NIS, pilih\n"
-#~ "\"LDAP\" (atau \"NIS\") . Jika Anda tak tahu, tanyalah admin jaringan "
-#~ "Anda.\n"
-#~ "\n"
-#~ "Jika komputer tak terhubung jaringan, Anda dapat memilih\n"
-#~ "\"File lokal\" utk otentikasi."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Silakan Anda buat satu atau lebih user \"biasa\", setelah Anda\n"
-#~ "membuat user \"pihak berwenang\", yaitu root. Anda bisa buat\n"
-#~ "user untuk tiap orang yang Anda perbolehkan untuk mengakses komputer\n"
-#~ "ini. Perhatikan bahwa tiap account user akan memiliki preferesi\n"
-#~ "sendiri-sendiri (environment grafis, seting program dsb)\n"
-#~ "dan juga punya \"direktori home\" sendiri, tempat preferensi tadi\n"
-#~ "disimpan\n"
-#~ "\n"
-#~ "\n"
-#~ "Pertama-tama, buatlah account untuk Anda sendiri! Buatlah walau Anda\n"
-#~ "adalah satu-satunya orang yang mengakses mesin ini. Anda nanti tidak\n"
-#~ "BOLEH mengakses mesin ini untuk keperluan sehari-hari, karena merupakan\n"
-#~ "resiko besar bila Anda sering login sebagai root. Biasanya ini "
-#~ "disebabkan\n"
-#~ "karena salah ketik, dsb.\n"
-#~ "\n"
-#~ "\n"
-#~ "Karena itu, biasakan untuk konek ke msein ini dengan menggunakan account\n"
-#~ "yang telah Anda buat disini, dan login sebagai root, hanya untuk \n"
-#~ "keperluan administratif dan maintenance saja yah."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Sangat disarankan Anda membuat bootdisk. Bila Anda gagal\n"
-#~ "memboot komputer, bootdisk adalah satu-satunya cara untuk\n"
-#~ "menyelamatkan sistem tanpa instal ulang."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Pilihan LILO dan grub adalah:\n"
-#~ "  - Boot device: Set nama devicenya (misalnya hard disk partisi) yang "
-#~ "berisi boot sector\n"
-#~ "                 pilih \"/dev/hda\", kecuali kalau Anda tahu yang "
-#~ "pastinya.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay sebelum boot ke image default: Menentukan waktu dalam "
-#~ "sepersepuluh detik\n"
-#~ " sebelum boot loader akan meload image yang default (pertama). Ini "
-#~ "berguna\n"
-#~ " pada sistem yang boot dari hard disk dan keyboardnya dinyalakan. Boot "
-#~ "loader\n"
-#~ " tidak menunggu bila \"delay\" dihilangkan atau diset ke nol.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: Menentukan mode text VGA yang dipilih saat booting. \n"
-#~ " Setting yang bisa dipakai: \n"
-#~ "  * normal: pilih mode text 80x25\n"
-#~ "  * <angka>: gunakan mode text.\n"
-#~ "\n"
-#~ "\n"
-#~ "   - Hapus \"/tmp\" saat boot bila Anda ingin menghapus semua file-file "
-#~ "di dalam direktori\n"
-#~ "\"/tmp\" saat boot sistem dimulai.\n"
-#~ "\n"
-#~ "\n"
-#~ "   - Ukuran RAM yang tepat. Duh, ngga ada metode standar untuk "
-#~ "mendapatkan \n"
-#~ "angka jumlah RAM yang tepat di komputer tertentu. Jadi, Linux mungkin "
-#~ "akan\n"
-#~ "salah mendeteksi jumlah RAM yang Anda punya sekarang. Bila benar, saya "
-#~ "salah\n"
-#~ "tebak angka RAMnya di sini, silakan masukkan angka yang benar. Oh ya,\n"
-#~ "beda 2 atau 4 MB sih ngga masalah loh."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO adalah bootloader untuk SPARC: Dianya akan memboot\n"
-#~ "GNU/Linux atau sistem operasi lain yang ada di komputer ini.\n"
-#~ "Biasanya, sistem operasi yang sudah ada akan secara normal di deteksi "
-#~ "dan\n"
-#~ "diinstallkan. Bila ternyata nanti tak bisa, Anda bisa tambahkan sendiri\n"
-#~ "secara manual di sini. Hati-hati yah nanti waktu kasih parameternya.\n"
-#~ "\n"
-#~ "\n"
-#~ "Anda juga bisa menutup akses ke sistem operasi tertentu. Caranya gampang "
-#~ "aja\n"
-#~ "Anda bisa hapus entrinya di sini. Tapi untuk bisa masuk ke sistem operasi "
-#~ "itu\n"
-#~ "Anda perlu bootdisk nantinya."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Pilihan SILO dan grub adalah:\n"
-#~ "  - Instalasi Bootloader: Tempat Anda hendak meletakkan informasi boot\n"
-#~ " ke GNU/Linux. Pilih aja \"Sektor pertama di drive (MBR)\", kecuali\n"
-#~ " elu udah tau tempatnya\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay sebelum boot ke image default: Menentukan waktu dalam "
-#~ "sepersepuluh detik\n"
-#~ " sebelum boot loader akan meload image yang default (pertama). Ini "
-#~ "berguna\n"
-#~ " pada sistem yang boot dari hard disk dan keyboardnya dinyalakan. Boot "
-#~ "loader\n"
-#~ " tidak menunggu bila \"delay\" dihilangkan atau diset ke nol."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Sekarang Anda akan mengkonfigurasikan X Window System, yang merupakan\n"
-#~ "inti GUI (Graphical User Interface) bagi GNU/Linux. Sekarang,\n"
-#~ "Anda harus konfigurasikan video card dan monitor. Biasanya\n"
-#~ "tahapan ini akan otomatis, tapi Anda perlu verifikasi\n"
-#~ "hasil deteksi dan memeriksanya, benar apa tidak:)\n"
-#~ "\n"
-#~ "\n"
-#~ "Setelah itu, X akan dijalankan (kecuali kalau Anda bilang jangan)\n"
-#~ "dan periksa apakah settingnya sudah cocok atau belum.\n"
-#~ "Kalau tidak cocok, Anda bisa kembali lagi dan mengubah konfigurasi\n"
-#~ "lalu coba lagi."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Bila ada yang ngaco pada konfigurasi Xnya, silaken pakai pilihan ini "
-#~ "untuk\n"
-#~ "membuat X Window System lebih bagus."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Bila Anda ingin menggunakan login grafis, pilih \"Ya\". Sebaliknya,\n"
-#~ "pilih \"Tidak\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Silakan pilih tingkat keamanan sistem ini. Baca dulu manualnya untuk info "
-#~ "lebihlengkap\n"
-#~ "Kalau Anda tak tahu, pilih saja default.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Sistem Anda akan diboot ulang.\n"
-#~ "\n"
-#~ "Setelah itu, Linux Mandrake akan di-load otomatis.\n"
-#~ "Bila Anda ingin boot ke sistem operasi lain, silakan baca instruksi\n"
-#~ "tambahan."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Ceko (Pemrogram)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakia (Pemrogram)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Beri nama profil yang hendak dibuat:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Tulis /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Format semua"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Setelah melakukan format semua partisi,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "seluruh data dalam partisi-partisi ini akan hilang"
-
-#~ msgid "Reload"
-#~ msgstr "Muat ulang"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Mau buat disket auto install untuk replikasi linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "konfigurasi ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Dengan server CUPS remote, Anda tidak perlu mengkonfigurasikan\n"
-#~ "printer di sini; printer nantinya akan secara otomatis dideteksi\n"
-#~ "kecuali servernya ada di jaringan lain; dalam hal ini, Anda perlu\n"
-#~ "memasukan alamat IP server CUPS itu dan nomor portnya kalau ada."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Isi Nama Printer dan Komentar"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nama antrian remote hilang!"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Di sini Anda dapat menentukan perintah sebarang di mana job harus "
-#~ "disodorkan, bukannya dikirim langsung ke printer."
-
-#~ msgid "Command line"
-#~ msgstr "Perintah"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Harus diisi perintah"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Pemantauan Jaringan"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistik"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Kecepatan Kirim"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Kecepatan Terima: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Waktu koneksi: "
-
-#~ msgid "Logs"
-#~ msgstr "Log"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Sambung koneksi Internet "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Putuskan koneksi Internet "
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "koneksi Internet gagal diputus."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "koneksi Internet selesai diputus."
-
-#~ msgid "Connection complete."
-#~ msgstr "Koneksi selesai."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Koneksi gagal\n"
-#~ "Silakan periksa konfigurasinya di Mandrake Control Center"
-
-#~ msgid "sent: "
-#~ msgstr "terkirim: "
-
-#~ msgid "received: "
-#~ msgstr "diterima: "
-
-#~ msgid "average"
-#~ msgstr "rata-rata"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Runlevel Standar"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Isi file konfigurasi tidak dapat dibaca"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Config file tidak dikenal"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptor"
-
-#~ msgid "Disable network"
-#~ msgstr "Matikan jaringan"
-
-#~ msgid "Enable network"
-#~ msgstr "Aktifkan jaringan"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Sekarang mouse Anda dapat dites. Gunakan tombol dan rodanya untuk\n"
-#~ "mengecek setting-nya. Bila belum baik, pilih \"Batal\" untuk kembali\n"
-#~ "memilih driver yang lain."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Konfigurasi koneksi DSL (atau ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "Pilih"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Anda bisa memasukan URI untuk mengakses printer dengan CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ya, tes cetak ascii"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ya, tes cetak postscript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ukuran Kertas"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Kertas di-eject setelah mencetak?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Parameter driver Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Pilihan kedalaman warna"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Cetak text dalam PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Betulkan efek tangga pada teks?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Jumlah halaman per output"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Margin Kiri/Kanan dalam point (1/72 inci)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Margin Atas/Bawah dalam point (1/72 inci)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Extra option pada GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Pilihan text extra"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Balikkan urutan halaman"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS dijalankan"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Pilih koneksi Printer remote"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Tiap antrian cetak harus punya nama (biasanya lp).\n"
-#~ "Parameter lain seperti keterangan dan lokasi printer bisa ditambahkan.\n"
-#~ "Sekarang saya mau tanya,\n"
-#~ "nama printer yang digunakan ini apa yah ?\n"
-#~ "Juga saya mau tanya bagaimana printernya disambungkan ke situ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Tiap antrian cetak harus punya nama (biasanya lp) dan direktori spool\n"
-#~ "yang dialokasikan untuknya. Sekarang saya mau tanya,\n"
-#~ "nama antrian dan direktori yang digunakan apa yah ?\n"
-#~ "Juga saya mau tanya bagaimana printernya disambungkan ke situ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nama Antrian"
-
-#~ msgid "Spool directory"
-#~ msgstr "Direktori spool"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Agar sistem Anda lebih secure, silakan pilih \"Gunakan file shadow\" "
-#~ "dan \n"
-#~ "\"Pakai katasandi MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Jika network Anda menggunakan NIS, pilih \"Gunakan NIS\". Jika tak tahu,\n"
-#~ "tanya admin jaringan Anda."
-
-#~ msgid "yellow pages"
-#~ msgstr "halaman kuning"
-
-#~ msgid "Light configuration"
-#~ msgstr "Konfigurasi ringan"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS Provider 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS Provider 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Pilih cara yang Anda inginkan untuk terhubung ke Internet"
-
-#~ msgid "cannot fork: "
-#~ msgstr "tidak bisa fork: "
-
-#~ msgid "Configure..."
-#~ msgstr "Konfigurasikan..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Ukuran yang dipilih %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Buka koneksi..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Skrip ini akan meload modul untuk mouse usb"
diff --git a/perl-install/share/po/id.xsl b/perl-install/share/po/id.xsl
deleted file mode 100644
index 4897a204f..000000000
--- a/perl-install/share/po/id.xsl
+++ /dev/null
@@ -1,5 +0,0 @@
-<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
-<xsl:template match="/">
-  <xsl:copy-of select="."/>
-</xsl:template>
-</xsl:stylesheet>
diff --git a/perl-install/share/po/is.po b/perl-install/share/po/is.po
deleted file mode 100644
index 03cddfd32..000000000
--- a/perl-install/share/po/is.po
+++ /dev/null
@@ -1,12530 +0,0 @@
-# Translation file for Mandrake graphic install, DrakX
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (C) 1999 Mandrakesoft
-# Jóhann Þorvarðarson <johann.torvardarson@lais.is>, 1999-2000
-# Þórarinn (Tony) R. Einarsson <thori@mindspring.com>, 1999-2000
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-01-05 18:53-0500\n"
-"Last-Translator: Thorarinn Einarsson <teinarsson@nc.rr.com>\n"
-"Language-Team: Icelandic\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Les uppsetningarskrá"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Skjákort"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Veldu skjákort"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Veldu X þjón"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X þjónn"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Veldu X þjón"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X þjónn"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hverju viltu bæta við?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-#, fuzzy
-msgid "XFree configuration"
-msgstr "Lokauppsetning"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Veldu minnisstærð skjákortsins"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Veldu valmöguleika fyrir þjón"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Veldu skjá"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Skjár"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Hér þarf að gefa upp 'horizontal sync' tíðni skjásins þíns. Þú getur\n"
-"valið tíðnisvið að neðan sem passar við staðlaða skjái eða gefið upp\n"
-"eitthvað annað.\n"
-"\n"
-"það er MJÖG MIKILVÆGT að velja ekki of hátt tíðnisvið fyrir skjáinn. Hafir\n"
-"þú einhverjar efasemdir, veldu þá lægri stillingar."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Lárétt tíðni"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Lóðrétt tíðni"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Skjár ekki skilgreindur"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Skjákort ekki skilgreint enn"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Upplausn ekki valin enn"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../Xconfigurator.pm_.c:650
-#, fuzzy
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aðvörun: Prófanir eru varasamar með þetta skjákort"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Prófunar skilgreining"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prófaðu að breyta stillingum"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Villa átti sér stað"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Hætti eftir %d sekúndur"
-
-#: ../../Xconfigurator.pm_.c:742
-#, fuzzy
-msgid "Is this the correct setting?"
-msgstr "Er þetta rétt?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Villa kom upp, reyndu að breyta færibreytum"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Upplausn"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Veldu upplausn og fjölda lita"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Skjákort: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 þjónn: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Færa"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Í lagi"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "F. snillinga"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Sýna alla"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Upplausnir"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tegund lyklaborðs: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tegund músar: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mús: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skjár: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Lárétt tíðni skjás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Lóðrétt tíðni skjás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Skjákort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Skjákort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Skjákortsminni: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Stillingar á litadýpt"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, fuzzy, c-format
-msgid "Resolution: %s\n"
-msgstr "Upplausnir"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 þjónn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 þjónn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Undirbý X-Window skilgreiningu"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Hvað viltu gera?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Skipta um skjá"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Skipta um skjákort"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Breyta þjóns möguleikum"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Breyta upplausn"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Sýna upplýsingar"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Prófa aftur"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Hætta"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Halda núverandi IP stillingum"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X í ræsingu"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ég get stillt tölvuna þína til að kveikja sjálfvirkt á X við ræsingu\n"
-"Vilt þú kveikja á X við endurræsingu?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Stimplaðu þig aftur inn í %s til að virkja breytingarnar"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Stimplaðu þig út og sláðu á Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 litir (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 þúsund litir (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 þúsund litir (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljón litir (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljarðar lita (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB eða meira"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Staðlað VGA, 640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Samhæft, 1024x768 @ 87 Hz samtvinnað (ekkert 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 @ 87 Hz samtvinnað, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ósamtvinnað SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hátíðni SVGA, 1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Skjár sem ræður við 1280x1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Skjár sem ræður við 1280x1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Skjár sem ræður við 1280x1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skjár sem ræður við 1600x1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skjár sem ræður við 1600x1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Á fyrsta geira ræsidisksneiðar"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Í ræsifærsluna (MBR)"
-
-#: ../../any.pm_.c:120
-#, fuzzy
-msgid "SILO Installation"
-msgstr "Uppsetning LILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvert viltu setja ræsistjórann?"
-
-#: ../../any.pm_.c:133
-#, fuzzy
-msgid "LILO/grub Installation"
-msgstr "Uppsetning LILO"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-#, fuzzy
-msgid "Yaboot"
-msgstr "Rót"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-#, fuzzy
-msgid "Bootloader main options"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:169
-#, fuzzy
-msgid "Bootloader installation"
-msgstr "Stillingar LILO"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Ræsitæki"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Samþjappað"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "samþjappað"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Skjáhamur"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Töf áður en sjálfgefin ræsing byrjar"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Lykilorð"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Lykilorð (aftur)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Takmarka alla rofa á skipanlínu"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "takmarka"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Nákvæm stærð vinnsluminnis (fann %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Sláðu inn vinnsluminni í MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Valkosturinn ``Takmarka alla rofa á skipanalínu'' gerir ekkert án lykilorðs"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Reyndu aftur"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Mismunandi lykilorð"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Sjálfgefið"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-#, fuzzy
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hérna eru núverandi stillingar LILO .\n"
-"Þú getur bætt við fleirum eða breytt þessum."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Bæta við"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Búið"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Breyta RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Hverju viltu bæta við?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Öðru stýrikerfi (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Öðru stýrikerfi (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Öðru stýrikerfi (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Ræsikjarna"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Rót"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Bæta aftan við"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Les-skrif"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tafla"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Óöruggt"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Nafn"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Sjálfgefið"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Fjarlægja"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Autt er ekki leyft"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Þú verður að hafa diskminni"
-
-#: ../../any.pm_.c:341
-#, fuzzy
-msgid "This label is already used"
-msgstr "Þetta nafn er nú þegar í notkun."
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fann %s %s tengi"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Er kannski eitt enn í vélinni?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Eru einhver %s tengi í tölvunni?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Já"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Skoðaðu vélbúnaðarupplýsingar"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Set inn rekil fyrir %s kortið %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(eining %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvaða %s rekil viltu prófa?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Í sumum tilfellum þarf rekillinn %s auka viðföng svo hann virki rétt,\n"
-" þó hann virki vel í flestum tilfellum án þeirra.  Viltu setja inn auka\n"
-" viðföng eða leyfa reklinum sjálfum að leita að þeim upplýsingum sem\n"
-" hann þarf?  Stundum frystir sjálfvirk stilling vélina en það ætti ekki\n"
-"að skemma neitt."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Stilla sjálfvirkt"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Stilla handvirkt"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-# ## skrytid
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Þú getur núna gefið upp viðföng fyrir eininguna %s.\n"
-"Viðföng eru gefin upp sem ``viðfang=gildi viðfang2=gildi2 ...''.\n"
-"Til dæmis: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Stillingar kjarnaeininga:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Innsetning á einingu %s mistókst.\n"
-"Viltu prófa aftur með ólík viðföng?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s er nú þegar til)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Þetta lykilorð er of einfalt"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Vinsamlega sláðu inn notandanafn"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Notandanafnið má bara innihalda litla stafi, tölustafi, `-' og `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Þetta notandanafn er nú þegar til"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Bæta við notanda"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sláðu inn notanda\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Samþykkja notanda"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nafn notanda"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Notandanafn:"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Skel"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ég get stillt tölvuna þína til að kveikja sjálfvirkt á X við ræsingu\n"
-"Vilt þú kveikja á X við endurræsingu?"
-
-#: ../../any.pm_.c:833
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Veldu nýja stærð"
-
-#: ../../any.pm_.c:834
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Veldu forritið sem þú vilt nota"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Hvernig mús ertu með?"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Bæta við notanda"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-#, fuzzy
-msgid "Custom"
-msgstr "Sérlagaða"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Staðbundinn prentari"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Hvaða pakka viltu setja inn"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Hætta við"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Velkomin(n) í tölvuþrjótinn"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Lélegt"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hátt"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Hátt"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Taugaveiklað"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Þetta er hið hefðbundna öryggi sem mælt er með fyrir tölvu sem verður notuð\n"
-"til að tengja við netið sem biðill. Öryggisathuganir eru núna í gangi. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Á þessu öryggisstigi er orðið mögulegt að nota tölvuna sem þjón.\n"
-"Öryggið er nógu nógu mikið til að taka við fyrirspurnum frá\n"
-"mörgum biðlum. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Kerfið er komið á 4. stig og er nú alveg lokað.\n"
-"Öryggið er á hæsta stigi."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Veldu öryggisstig"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Stilli öryggisþrep"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Veldu valmöguleika fyrir þjón"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, fuzzy, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkomin(n) i %s styrikerfisraesistjorann!\n"
-"\n"
-"Sladu a <TAB> til ad fa lista yfir moegulega valkosti.\n"
-"\n"
-"Til raesa einn af theim, sl du inn nafnid og sidan a <ENTER>\n"
-"eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Hvert viltu setja ræsistjórann?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Lokauppsetning"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-#, fuzzy
-msgid "/_File"
-msgstr "Skrár:\n"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Skjár"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Skipta um skjá"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Hringja inn með mótaldi"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Ræsitæki"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Veldu prenttengingu"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Stilla X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "Hætti eftir %d sekúndur"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Get ekki bætt við disksneiðum"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Hætta við"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgískt"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Þýskt"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grískt"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norkst"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Skoða"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Ítalskt"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "raðtengd"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Vinsamlega taktu fyrst afrit af öllum gögnum"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lestu vandlega!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Villa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Veldu aðgerð"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-#, fuzzy
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Þú hefur eina stóra FAT disksneið.\n"
-"(venjulega notuð af Microsoft DOS/Windows).\n"
-"Ég legg til að þú endursníðir hana\n"
-"(smelltu á hana, síðan á \"Endursníða\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Smelltu á disksneið"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Ítarleg atriði"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "tókst ekki að tengja"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Diskminni"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tóm"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Annað"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tegundir skráakerfa:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Búa til"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tegund"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Nota ``%s'' í staðinn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Eyða"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Nota ``Aftengja'' fyrst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, fuzzy, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Veldu aðgerð"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Búa til nýja disksneið"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Færa í snillingsham"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Fara í venjulegan ham"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Endurheimta"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Halda samt áfram?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Hætta án þess að vista"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Hætta án þess að skrifa sneiðatöfluna?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Ráðstafa skjálfkrafa"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Hreinsa allt"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Sýna upplýsingar"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Öll aðal skráarsnið eru í notkun"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Get ekki bætt við disksneiðum"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Til að fá fleiri disksneiðar, vinsamlega eyddu einni til að búa til "
-"viðbótarsneið"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skrifa sneiðatöflu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Bjarga sneiðatöflunni"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Bjarga sneiðatöflunni"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Bjarga sneiðatöflunni"
-
-# ## skrytid
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Sjálfvirk tenging aukatækja"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Veljið skrá"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Disksneiðin sem var tekin sem afrit er ekki af sömu stærð\n"
-"Halda áfram?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Aðvörun"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Settu diskling í drifið\n"
-"Öll gögn á þessum diskling tapast"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Reyni að endurheimta disksneiðatöfluna"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Sýna upplýsingar"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Tengipunktur"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-#, fuzzy
-msgid "Options"
-msgstr "Upplýsingar"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Endurstækka"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Færa"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Forsníða"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Tengipunktur"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Bæta við RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Bæta við LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Aftengja"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Taka úr RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Taka úr LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Breyta RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Búa til nýja disksneið"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Byrjunar geiri"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Stærð í MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tegund skráakerfis:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Tengipunktur: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Valkostur:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Forsníð disksneið %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Breyta tegund sneiðar"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, fuzzy, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvar viltu tengja tæki %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvar viltu tengja tæki %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Reikna takmarkanir FAT skráarkerfis..."
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Endursníð"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-#, fuzzy
-msgid "All data on this partition should be backed-up"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, fuzzy, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Veldu nýja stærð"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Stærð í MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Geiri"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hvaða geira viltu færa gögn til?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Færi"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Færi disksneið..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Veldu RAID sem til er fyrir til að bæta við"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ný"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Veldu LVM sem til er fyrir til að bæta við"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nafn notanda"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:781
-#, fuzzy
-msgid "File already exists. Use it?"
-msgstr "Nafnið %s er þegar í notkun"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Stillingar kjarnaeininga:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "tæki"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "stig"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "stærð hlutar"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:906
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Hvernig prentara ertu með?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Því miður get ég ekki sett /boot svona innarlega á drifið (á sívalning > "
-"1024).\n"
-"Annaðhvort notar þú LILO og það mun ekki virka, eða þú notar ekki LILO og "
-"sleppir því að hafa /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Disksneiðin sem þú hefur valið til að nota sem rót (/) er utan\n"
-"1024. sívalnings á harða disknum og þú hefur enga /boot sneið.\n"
-"Ef þú ætlar að nota LILO ræsistjórann skaltu muna að bæta við /boot sneið"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Disksneiðatafla drifs %s mun verða skrifuð á disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Þú þarft að endurræsa áður en breytingar taka gildi"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, fuzzy, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Forsníðing"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, fuzzy, c-format
-msgid "Formatting loopback file %s"
-msgstr "Forsníð disksneið %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Forsníð disksneið %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Búa til nýja disksneið"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Búa til nýja disksneið"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Upplausnir"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Tæki: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS drifstafur: %s (bara ágiskun)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tegund: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Byrja: geiri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Stærð: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s geirar"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sívalningur %d til %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Forsniðinn\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ekki forsniðinn\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Tengdur\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Sjálfgefin disksneið ræst\n"
-"    (fyrir MS-DOS ræsingu, ekki fyrir LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Stig %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Hlunkastærð %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskar %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Stærð: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Skilgreining: %s sívalningar, %s hausar, %s geirar\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Upplýsingar: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskar %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, fuzzy, c-format
-msgid "Partition table type: %s\n"
-msgstr "Rótardisksneið"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "á gagnabraut %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "Rótardisksneið"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tegund skráakerfis:"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Mismunandi lykilorð"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Breyta tegund sneiðar"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Smelltu á disksneið"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Nafnamiðlari"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, fuzzy, c-format
-msgid "%s formatting of %s failed"
-msgstr "gat ekki forsniðið %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "kann ekki að forsníða %s af tegundinni %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "villa við að aftengja %s: %s"
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Skrá"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "netþjónn"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Heiti tengipunkta verða að byrja á /."
-
-#: ../../fsedit.pm_.c:478
-#, fuzzy, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Það er þegar disksneið með tengipunktinn %s"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Villa við að opna %s til skriftar: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Það kom upp villa. Engin tæki fundust sem unnt er að búa til ný skráakerfi "
-"á. Vinsamlegast athugaðu vélbúnaðinn í leit að orsök vandamálsins."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Þú hefur ekki neinar disksneiðar"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Veldu tengið sem þú vilt nota.  Tengið COM1 í MS Windows er kallað\n"
-"ttyS0 í Linux, COM2 er ttyS1, o.s.frv."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Hér gefur þú upp hvar þú vilt láta þær upplýsingar sem\n"
-"þarf til að ræsa Linux.\n"
-"\n"
-"\n"
-"Veldu \"Í ræsifærsluna (MBR)\" nema þú vitir nákvæmlega\n"
-"hvað þú ert að gera."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Get ekki notað útsendingu án NIS léns"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "villa við lestur úr skránni %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Þú verður að hafa rótarsneið fyrir Linux.  Búðu því annaðhvort\n"
-"til rótarsneið eða veldu sneið sem nú þegar er til á disknum.\n"
-"Veldu síðan ``Tengipunktur'' og sláðu inn `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Þú verður að hafa diskminni"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Þú hefur ekkert diskminni\n"
-"\n"
-"Halda samt áfram?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Þú verður að hafa diskminni"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Use free space"
-msgstr "Notandanafn:"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-#, fuzzy
-msgid "Use existing partition"
-msgstr "Forsníð disksneið %s"
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Reyni að endurheimta disksneiðatöfluna"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvaða disksneið vilt þú nota sem rótardisksneið"
-
-#: ../../install_interactive.pm_.c:114
-#, fuzzy
-msgid "Choose the sizes"
-msgstr "Veldu nýja stærð"
-
-#: ../../install_interactive.pm_.c:115
-#, fuzzy
-msgid "Root partition size in MB: "
-msgstr "Rótardisksneið"
-
-#: ../../install_interactive.pm_.c:116
-#, fuzzy
-msgid "Swap partition size in MB: "
-msgstr "Stærð í MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Reikna takmarkanir FAT skráarkerfis..."
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AÐVÖRUN\n"
-"\n"
-"DrakX þarf núna að endurgera Windows sneiðina. Athugið: Þetta getur haft "
-"alvarlegar\n"
-"afleiðingar í för með sér. Ef þú ert ekki búin(n) að því, þá ættir þú fyrst "
-"að\n"
-"keyra scandisk (og jafnvel líka defrag) á þessa sneið og taka síðan afrit "
-"af\n"
-"gögnunum þínum.\n"
-"Sláðu á 'Í lagi' til að halda áfram."
-
-#: ../../install_interactive.pm_.c:147
-#, fuzzy
-msgid "Which size do you want to keep for windows on"
-msgstr "Hvaða geira viltu færa gögn til?"
-
-#: ../../install_interactive.pm_.c:148
-#, fuzzy, c-format
-msgid "partition %s"
-msgstr "Rótardisksneið"
-
-#      ******************************************
-#      *****   Byrjaði hérna 4. jan 2000  *******
-#      ***  ATH: Það er sumt eftir fyrir ofan ***
-#      ******************************************
-#
-#: ../../install_interactive.pm_.c:155
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Sjálfvirk endurstækkun brást"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "öll gögn á þessari disksneið tapast"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Forsníð disksneið %s"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Þú hefur ekki neinar disksneiðar"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Get ekki bætt við disksneiðum"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Rótardisksneið"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Keyri upp netið"
-
-#: ../../install_interactive.pm_.c:266
-#, fuzzy
-msgid "Bringing down the network"
-msgstr "Keyri upp netið"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Óþekkt villa kom upp sem ekki er hægt að meðhöndla.\n"
-"Haltu áfram á eigin ábyrgð."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s tengipunktur er nú þegar til"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, fuzzy, c-format
-msgid "Welcome to %s"
-msgstr "Velkomin(n) í tölvuþrjótinn"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ekkert disklingadrif aðgengilegt"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Hef skref `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Innsetningaraðferð"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Vinsamlega tilgreindu eftirfarandi"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-#, fuzzy
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Þú munt geta valið af meiri nákvæmni í næsta skrefi"
-
-#: ../../install_steps_gtk.pm_.c:243
-#, fuzzy
-msgid "Percentage of packages to install"
-msgstr "Veldu pakka til að setja inn"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-#, fuzzy
-msgid "Individual package selection"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, fuzzy, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Heildarstærð: "
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Skemmdur pakki"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Útgáfa: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Stærð: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Eftirfarandi pakkar verða fjarlægðir"
-
-#: ../../install_steps_gtk.pm_.c:423
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Eftirfarandi pakkar verða fjarlægðir"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Innsetning"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Vista á diskling"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Fjarlægja"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Veldu pakkana sem þú vilt setja inn"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Set inn"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Áætla"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tími eftir "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Undirbý innsetningu"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakkar"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Set inn pakka %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-#, fuzzy
-msgid "Accept"
-msgstr "Samþykkja notanda"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#, fuzzy
-msgid "Refuse"
-msgstr "Endurstækka"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Viltu samt halda áfram?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Það kom upp villa við að raða pökkum:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-#, fuzzy
-msgid "There was an error installing packages:"
-msgstr "Það kom upp villa við að raða pökkum:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Villa kom upp"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Lyklaborð"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Hvaða lyklaborðsuppsetningu viltu?"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-#, fuzzy
-msgid "Which installation class do you want?"
-msgstr "Hverskonar innsetningaraðferð viltu?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "Innsetning/Uppfærsla"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Er þetta innsetning eða uppfærsla?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Auðvelda"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "F. snillinga"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uppfærsla"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Hvernig mús ertu með?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Músartengi"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-#, fuzzy
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Við hvaða raðtengi er músin þín tengd?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Stilli PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-#, fuzzy
-msgid "Configuring IDE"
-msgstr "Uppsetning"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "engar reiðubúnar disksneiðar"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Veldu tengipunktana"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ég get ekki lesið disksneiðatöflu þína, hún er of skemmd fyrir mig :-(\n"
-"Ég mun reyna að halda áfram með því að hreinsa skemmdar disksneiðar"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake gat ekki lesið sneiðatöfluna.\n"
-"Haltu áfram á eigin ábyrgð!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Engin rótarsneið fannst"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rótardisksneið"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Hver er rótardisksneið (/) kerfisins?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Þú verður að ræsa tölvuna aftur svo breytingar á sneiðatöflunni taki gildi"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Veldu þær disksneiðar sem á að forsníða"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Athuga skemmdar blokkir?"
-
-#: ../../install_steps_interactive.pm_.c:462
-#, fuzzy
-msgid "Formatting partitions"
-msgstr "Forsníð disksneið %s"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ekki nægjanlegt diskminni fyrir innsetningu.  Bættu við það"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Leita að fáanlegum pökkum"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Leita að pökkum til að uppfæra"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Venjulega"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Minimum (%dMB)"
-msgstr "(%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Auðvelda"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Endurheimta frá diskling"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Endurheimta frá diskling"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Vista á diskling"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Veldu pakka til að setja inn"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Augnablik"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Undirbý innsetningu"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Set inn pakka %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Lokauppsetning"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-#, fuzzy
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nú gefst þér tækifæri til að sækja hugbúnað sem ætlaður er til dulritunar.\n"
-"\n"
-"AÐVÖRUN:\n"
-"\n"
-"Þar sem lög um dulritunarhugbúnað eru mjög mismunandi eftir löndum og reglur "
-"sem settar\n"
-"eru af yfirvöldum oft strangar, þá þarf notandi slíks hugbúnaðar að ganga úr "
-"skugga\n"
-"um að viðkomandi lögsagnarumdæmi leyfi þessa gagnaflutninga, ásamt "
-"varðveislu og\n"
-"notkun á slíkum hugbúnaði.\n"
-"\n"
-"Viðskiptavinir Mandrake og/notendur Mandrake Linux skulu því sjá til þess að "
-"þeir brjóti ekki\n"
-"þau lög sem sett hafa verið í landi viðkomandi.  Ef viðkiptavinir og/eða "
-"notendur\n"
-"virða ekki þessi lög þá mega þeir búast við þeim refsiaðgerðum sem slíkar "
-"athafnir\n"
-"hafa í för með sér.\n"
-"\n"
-"Hvorki Mandrakesoft né framleiðsluaðilar eða dreifingaraðilar þeirra bera "
-"ábyrgð á\n"
-"sérstökum, óbeinum eða beinum, skaða (þ.m.t. en ekki takmarkað af,\n"
-"hagnaðartapi, viðskiptabanni eða truflun, gagnatapi og\n"
-"öðru fjárhagslegu tapi, skaðabótum eða öðrum bótum sem fyrirskipað er af "
-"dómstóli\n"
-"að skuli borgast) sökum notkunar, varðveislu, eða flutnings\n"
-"af slíkum hugbúnaði, sem viðskiptavinur og/eða notandi hafði aðgang að "
-"eftir\n"
-"að hafa samþykkt þennan samning..\n"
-"\n"
-"Þessi samningur fellur undir og skal vera túlkaður af lögum Frakklands nema\n"
-"þar sem krafist er notkun laga viðkomandi yfirvalda. \n"
-"Þessi samningur inniheldur hinsvegar ekki hverskonar lög sem bjóða upp á "
-"árekstra, \n"
-"undirstöðuatriði eða lagaákvæði sem mæla á móti. Frönsk lög\n"
-"skulu í þeim tilfellum gilda fram yfir lög viðkomandi lands.\n"
-"\n"
-"Frekari upplýsingar um þennan samning fást hjá \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena, California, 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Hef samband við vélina til að sækja lista yfir fáanlega pakka"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Veldu spegilvélina þaðan sem á að sækja pakkanna"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Hef samband við vélina til að sækja lista yfir fáanlega pakka"
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Á hvaða tímasvæði ertu?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Veltu stilla tölvuklukkuna á GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS þjónn"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Fjartengd prentröð"
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Er kannski eitt enn í vélinni?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "USB mús"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Prentari"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Nota NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Staðbundinn prentari"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ákveða rótarlykilorð"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ekkert lykilorð"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Auðkenning"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Auðkenning"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "netþjónn"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Auðkenning NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS lén"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS þjónn"
-
-#: ../../install_steps_interactive.pm_.c:1171
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Sérsmíðaður ræsidisklingur gerir þér kleyft að ræsa Linux án þess að nota "
-"ræsistjóra\n"
-" eins og LILO. Þetta kemur að gagni ef þú vilt ekki setja upp LILO á vélinni "
-"eða ef\n"
-" annað stýrikerfi hefur fjarlægt LILO eða LILO virkar ekki með þínum "
-"vélbúnaðarstillingum.\n"
-" Ræsidiskling má einnig nota með Mandrake Linux 'rescue' disklingnum svo "
-"hægt sé að bjarja\n"
-" vélinni ef alvarleg vandamál koma upp.\n"
-"Viltu búa til ræsidiskling fyrir vélina þína?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-#, fuzzy
-msgid "First floppy drive"
-msgstr "Fyrsta drif"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, fuzzy
-msgid "Second floppy drive"
-msgstr "Annað drif"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Sleppa"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Sérsmíðaður ræsidisklingur gerir þér kleyft að ræsa Linux án þess að nota "
-"ræsistjóra\n"
-" eins og LILO. Þetta kemur að gagni ef þú vilt ekki setja upp LILO á vélinni "
-"eða ef\n"
-" annað stýrikerfi hefur fjarlægt LILO eða LILO virkar ekki með þínum "
-"vélbúnaðarstillingum.\n"
-" Ræsidiskling má einnig nota með Mandrake Linux 'rescue' disklingnum svo "
-"hægt sé að bjarja\n"
-" vélinni ef alvarleg vandamál koma upp.\n"
-"Viltu búa til ræsidiskling fyrir vélina þína?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ekkert disklingadrif til staðar"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Veldu disklingadrifið sem þú vilt nota til að gera ræsidisk"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Bý til ræsidiskling..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Set upp ræsistjórann..."
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Viltu nota SILO?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Setja inn ræsihlaðara"
-
-#: ../../install_steps_interactive.pm_.c:1259
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Innsetning LILO brást sökum eftirfarandi villu:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, fuzzy, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Settu tóman diskling í drif %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "Undirbý innsetningu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Sum skref eru ennþá eftir.\n"
-"\n"
-"Viltu virkilega hætta núna?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Til hamingju! Innsetningu er lokið.\n"
-"Taktu disklinginn eða geisladiskinn úr drifinu og sláðu á ENTER.\n"
-"\n"
-"\n"
-"Á http://www.linux-mandrake.com/en/82errata.php3 má finna viðbætur og/eða "
-"lagfæringar\n"
-"á göllum sem gætu verið til staðar í þessari útgáfu af Mandrake Linux\n"
-"\n"
-"\n"
-"Frekari upplýsingar um hvernig á að stilla vélina eftir innsetninguna er að\n"
-"finna í viðeigandi kafla í Official Mandrake Linux User's Guide bókinni."
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Undirbý innsetningu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Automated"
-msgstr "Sjálfvirkt IP"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "Endurhlaða"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Val á pakkahóp"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux innsetning %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> milli hluta   |   <Bilslá> velur   |   <F12> næsti skjár "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Veldu aðgerð"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Augnablik..."
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Upplýsingar"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Opna tré"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Loka tré"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Slæm hugmynd, reyndu aftur\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Þitt val? (sjálfgefið %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Þitt val? (sjálfgefið %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Rótardisksneið"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Viltu nota SILO?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Þitt val? (sjálfgefið %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tékkneskt (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Þýskt"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spænskt"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finnskt"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franskt"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norkst"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pólskt"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rússneskt"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sænskt"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Breskt lyklaborð"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Bandarískt lyklaborð"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Úkraínkst"
-
-#: ../../keyboard.pm_.c:189
-#, fuzzy
-msgid "Armenian (old)"
-msgstr "Armenískt"
-
-#: ../../keyboard.pm_.c:190
-#, fuzzy
-msgid "Armenian (typewriter)"
-msgstr "Armenískt (hljóðfræðilegt)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenískt (hljóðfræðilegt)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgískt"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenískt (hljóðfræðilegt)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Búlgarskt"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilískt"
-
-#: ../../keyboard.pm_.c:202
-#, fuzzy
-msgid "Belarusian"
-msgstr "Búlgarskt"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svissneskt (þýsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svissneskt (frönsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tékkneskt (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danskt"
-
-#: ../../keyboard.pm_.c:210
-#, fuzzy
-msgid "Dvorak (US)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:211
-#, fuzzy
-msgid "Dvorak (Norwegian)"
-msgstr "Norkst"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eistlenskt"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgískt (\"Rússneskt\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgískt (\"Latínu\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grískt"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungverskt"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Ísraelískt"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Ísraelískt (hljóðfr.)"
-
-#: ../../keyboard.pm_.c:224
-#, fuzzy
-msgid "Iranian"
-msgstr "Úkraínkst"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Íslenskt"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Ítalskt"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Breskt lyklaborð"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Suður amerískt"
-
-#: ../../keyboard.pm_.c:233
-#, fuzzy
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litháenískt AZERTY"
-
-#: ../../keyboard.pm_.c:235
-#, fuzzy
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litháenískt AZERTY"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litháenískt \"töluröð\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litháenískt \"hljóðfræðilegt\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Upplýsingar"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollenskt"
-
-#: ../../keyboard.pm_.c:242
-#, fuzzy
-msgid "Polish (qwerty layout)"
-msgstr "Svissneskt (þýsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:243
-#, fuzzy
-msgid "Polish (qwertz layout)"
-msgstr "Svissneskt (þýsk uppsetn.)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portúgískt"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadískt (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rússneskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rússneskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rússneskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slóvenskt"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slóvakískt (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slóvakískt (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Júgoslavneskt (Latínu upps.)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tafla"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thælenskt lyklaborð"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thælenskt lyklaborð"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkneskt (hefðbundið \"F\" módel)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkneskt (nútíma \"Q\" módel)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Úkraínkst"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Bandarískt (alþjóðlegt)"
-
-#: ../../keyboard.pm_.c:269
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Litháenískt \"töluröð\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Júgoslavneskt (Latínu upps.)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-#, fuzzy
-msgid "Sun - Mouse"
-msgstr "USB mús"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Almenn mús"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:46
-#, fuzzy
-msgid "Wheel"
-msgstr "stig"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "raðtengd"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Almenn þriggja hnappa mús"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mús (raðtengd, gömul C7 tegund)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "Engin mús"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-#, fuzzy
-msgid "none"
-msgstr "Búið"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Engin mús"
-
-#: ../../mouse.pm_.c:499
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "Hvernig mús ertu með?"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Hvernig mús ertu með?"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "Finnskt"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Er þetta rétt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Nafn tengingar"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Veldu nýja stærð"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Við hvaða raðtengi er músin þín tengd?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ekkert netkort fannst"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Stilli staðarnetstenginu"
-
-#: ../../network/ethernet.pm_.c:203
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Sláðu inn heiti vélarinnar.  Vélarheitið þarf að vera fullt \n"
-"heiti, t.d. odinn.grimsey.is  Þú mátt líka slá inn IP \n"
-"vistfang gáttarinnar ef þú veist hvað það vistfang er.\n"
-"Gáttin gefur þér aðgang út úr staðarnetinu (t.d. á Internetið)."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-#, fuzzy
-msgid "Host name"
-msgstr "Vélarheiti:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Netstillingar"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "F. snillinga"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Við hvaða raðtengi er músin þín tengd?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Les uppsetningarskrá"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Les uppsetningarskrá"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Uppsetning"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Prófunar skilgreining"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../network/isdn.pm_.c:199
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Hvernig prentara ertu með?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-#, fuzzy
-msgid "ISA / PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-#, fuzzy
-msgid "PCI"
-msgstr "PCMCIA"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-#, fuzzy
-msgid "Continue"
-msgstr "Halda samt áfram?"
-
-#: ../../network/isdn.pm_.c:216
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Á hvaða tímasvæði ertu?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Hvaða raðtengi er mótaldið tengt við?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Innhringistillingar"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nafn tengingar"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-#, fuzzy
-msgid "Phone number"
-msgstr "Símanúmer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Notendanafn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Með skriftu"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Með skjáhermi"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nafn léns"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Aðal nafnamiðlari"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Vara nafnamiðlari"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nafn tengingar"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Nafn tengingar"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:50
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netstillingar"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Veldu nýja stærð"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Leita að tækjum..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Stilla nettengingu"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "%s tengipunktur er nú þegar til"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Veldu forritið sem þú vilt nota"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "Viltu nota aboot?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "Netstillingar"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Sláðu inn IP uppsetningu þessarar vélar. Hver færsla\n"
-"á að vera IP tala rituð með punkt á milli.\n"
-"(dæmi 192.168.1.13)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Stilli nettæki %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "XFree86 þjónn: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-#, fuzzy
-msgid "IP address"
-msgstr "IP vistfang:"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-#, fuzzy
-msgid "Netmask"
-msgstr "Netsía:"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Sjálfvirkt IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP vistfang á að vera á sniðinu 192.168.1.10"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Sláðu inn heiti vélarinnar.  Vélarheitið þarf að vera fullt \n"
-"heiti, t.d. odinn.grimsey.is  Þú mátt líka slá inn IP \n"
-"vistfang gáttarinnar ef þú veist hvað það vistfang er.\n"
-"Gáttin gefur þér aðgang út úr staðarnetinu (t.d. á Internetið)."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Nafnamiðlari"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gátt (tækið)"
-
-#: ../../network/network.pm_.c:381
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Lokauppsetning"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP sel:"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP Sel:"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Sel á að vera http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Sel á að vera ftp://..."
-
-#: ../../network/tools.pm_.c:39
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Sel stillingar"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Stilla nettengingu"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Hvaða disk viltu færa til?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nafn tengingar"
-
-#: ../../network/tools.pm_.c:76
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Sel stillingar"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-#, fuzzy
-msgid "Provider phone number"
-msgstr "Símanúmer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Stillingar á prentara"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Stillingar á prentara"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Veldu lyklaborð"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Hringja inn með mótaldi"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Nafn tengingar"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Nafn tengingar"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Tengipunktur"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-#, fuzzy
-msgid "Account Password"
-msgstr "Lykilorð"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "tókst ekki að tengja: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Það er gat í sneiðatöflunni þinni sem ekki er hægt að nota.\n"
-"Eina lausnins er að færa aðalsneiðar svo að gatið verði við hliðina á "
-"viðbótasneið"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Villa við lestur úr skránni %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Skemmd afritsskrá"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Villa við að skrifa í skrána %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-#, fuzzy
-msgid "nice"
-msgstr "tæki"
-
-#: ../../pkgs.pm_.c:28
-#, fuzzy
-msgid "maybe"
-msgstr "Ræsikjarna"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Remote printer"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Fjartengd prentröð"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Fjartengdur"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Viðföng NetWare prentara"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Prentþjónn"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Prenttæki:"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Staðbundinn prentari"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Villa við að skrifa í skrána %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(eining %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Vistfang SMB þjóns"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Sjálfgefið)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvernig er þessi prentari tengdur?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Uppsetning"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Fjartengd prentröð"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP vistfang á að vera á sniðinu 192.168.1.10"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Vistfang SMB þjóns"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-#, fuzzy
-msgid "Port"
-msgstr "Lélegt"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Lokauppsetning"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Leita að tækjum..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Prófa tengi"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s tengipunktur er nú þegar til"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Staðbundinn prentari"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Hvaða raðtengi er mótaldið tengt við?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Prenttæki:"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Uppsetning"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Set inn pakka %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Set inn pakka %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Til þess að nota fjartengda lpd prentröð þarftu að gefa\n"
-"upp vélarheiti prentþjónsins og prentröðina á þeim sem\n"
-"þú vilt senda prentverkin í."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Prentþjónn:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Prentþjónn:"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Prentþjónn:"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB/Windows 9x/NT prentviðföng"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Til þess að geta prentað á SMB prentara þarftu að gefa\n"
-"upp SMB vélarheiti þjónsins (sem er ekki endilega það\n"
-"sama og TCP/IP vélarheitið en oftast) og jafnvel IP vistfang prentþjónsins\n"
-"ásamt samnýtingarheiti prentarans, notandaheiti, lykilorði og\n"
-"vinnuhópsupplýsingum fyrir prentarann."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Heiti SMB þjóns"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Vistfang SMB þjóns"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Samnýtingarheiti"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Vinnuhópur"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Viðföng NetWare prentara"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Til þess að geta prentað á NetWare prentara þarftu að gefa upp NetWare\n"
-"vélarheiti þjónsins (sem er ekki endilega það sama og TCP/IP vélarheitið)\n"
-"ásamt heiti prentaraðar, notandaheiti og lykilorði fyrir\n"
-"prentarann."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Prentþjónn"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Heiti prentraðar"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Viðföng staðbundinna prentara"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Stillingar á prentara"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Stillingar á prentara"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Prenttæki:"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-#, fuzzy
-msgid "Name of printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../printerdrake.pm_.c:1006
-#, fuzzy
-msgid "Description"
-msgstr "Stilla handvirkt"
-
-#: ../../printerdrake.pm_.c:1007
-#, fuzzy
-msgid "Location"
-msgstr "Upplýsingar"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Er þetta rétt?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Hvernig prentara ertu með?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Sel stillingar"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Sel stillingar"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Viltu prenta út prufublaðsíðu?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Prófa tengi"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Já, prenta báðar prufusíður"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Prentari"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Forritun"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Prenta út prufublaðsíðu(r)..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Prenta út prufublaðsíðu(r)..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Prenta út prufublaðsíðu(r)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Prenta út prufublaðsíðu(r)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "USB mús"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Keyri upp netið"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Keyri upp netið"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Stillingar á prentara"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Sel stillingar"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Staðbundinn prentari"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Stilla prentara"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Stilla nettengingu"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Stilla nettengingu"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Skjár ekki skilgreindur"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Stilli staðarnetstenginu"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Hátt"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Taugaveiklað"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvaða sneiðtegund viltu?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Setja upp prentara"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Set inn pakka %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Stillingar á prentara"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Setja upp prentara"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Viltu setja upp prentara?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Prentari"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Stilla nettengingu"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Venjulega"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Sel stillingar"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Veldu prenttengingu"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Prenta út prufublaðsíðu(r)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Staðbundinn prentari"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Lokauppsetning"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Lélegt"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Sel á að vera http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Sel á að vera ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Belgískt"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Lykilorð"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Ekkert lykilorð"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Mismunandi lykilorð"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, fuzzy, c-format
-msgid "Can't write file %s"
-msgstr "Villa við að skrifa í skrána %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ekki nógu margar disksneiðar fyrir RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Veldu þær þjónustur sem skal sjálfkrafa keyra við ræsingu"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Prentari"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "Endursníð..."
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Prentþjónn"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "tæki"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Aðvörun"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Bæta aftan við"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Rót"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "takmarka"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Geiri"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Prófunar skilgreining"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Endursníð..."
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Margmiðlun"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Forritun"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Nafn tengingar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Endursníð..."
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Heiti SMB þjóns"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-#, fuzzy
-msgid "Games"
-msgstr "Búið"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "snillingur"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Set inn pakka %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ég get ekki lesið disksneiðatöflu þína, hún er of skemmd fyrir mig :-(\n"
-"Ég mun reyna að halda áfram með því að hreinsa skemmdar disksneiðar"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Villa"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Lokauppsetning"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Lokauppsetning"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Til hamingju!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Innsetning"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Bæta við notanda"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Forsníð disksneið %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Skemmd afritsskrá"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Skemmd afritsskrá"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Skemmd afritsskrá"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Val á pakkahóp"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Fjartengd prentröð"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Hvernig mús ertu með?"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Reyndu aftur"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Hvernig mús ertu með?"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Ákveða rótarlykilorð"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Hvaða lyklaborðsuppsetningu viltu?"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Smelltu á disksneið"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Veldu pakkana sem þú vilt setja inn"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Hvernig mús ertu með?"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Skemmd afritsskrá"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Geiri"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Notandanafn:"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Hvernig mús ertu með?"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Nota fínstillingar á hörðum disk(um)"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Augnablik"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "stig"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "stig"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Stillingar kjarnaeininga:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Veldu pakkana sem þú vilt setja inn"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Veldu pakkana sem þú vilt setja inn"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Setja upp skráarkerfi"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Upplýsingar"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Hvaða raðtengi er mótaldið tengt við?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Netstillingar"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Hvernig mús ertu með?"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Endurheimta frá skrá"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Annað"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Setja kerfið inn"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Endurheimta frá skrá"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Endurheimta frá skrá"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Sérlagaða"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "Hjálp"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "netþjónn"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Endurstækka"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Texta"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Veldu pakka til að setja inn"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Skemmd afritsskrá"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Skemmd afritsskrá"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Skemmd afritsskrá"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Vista í skrá"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Hvernig mús ertu með?"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Veldu pakkana sem þú vilt setja inn"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Netstillingar"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Netstillingar"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Innsetning %s brást sökum eftirfarandi villu:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s fannst ekki"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Búið"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Forsníð"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Undirbý innsetningu"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "takmarka"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Forsníða disksneiðar"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Fjarlægji RPM pakkana"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Uppsetning"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Tengipunktur"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Veldu þær disksneiðar sem á að forsníða"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "tæki"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Prentari"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Setja kerfið inn"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Veljið skrá"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Innsetning"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Hætta innsetningu"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "Tafla"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "Stilla X"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Leita að tækjum..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "Tafla"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Endursníð..."
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Skjár ekki skilgreindur"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Lokauppsetning"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Sel stillingar"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "Vistfang SMB þjóns"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Les uppsetningarskrá"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Uppsetning"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Set inn pakka %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netstillingar"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "tókst ekki að tengja: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Vélarheiti:"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Endursníð..."
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Tegund: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gátt:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "Endursníð..."
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Setja upp prentara"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "Sem þjón"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Endursníð..."
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr ""
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Stilla nettengingu"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Prófunar skilgreining"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Virk"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Virk"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Veldu prenttengingu"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nafn tengingar"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gátt"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Stilli öryggisþrep"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Veldu forritið sem þú vilt nota"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadískt (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Íslenskt"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "raðtengd"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-#, fuzzy
-msgid "Please, choose your keyboard layout."
-msgstr "Hvaða lyklaborðsuppsetningu viltu?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Breyta upplausn"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "Skrár:\n"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-#, fuzzy
-msgid "/File/-"
-msgstr "Skrár:\n"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Upplýsingar"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Upplýsingar"
-
-#: ../../standalone/logdrake_.c:110
-#, fuzzy
-msgid "/_Help"
-msgstr "Hjálp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "USB mús"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Prófa tengi"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-#, fuzzy
-msgid "search"
-msgstr "Leita"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "forsníð"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Veldu aðgerð"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Nafn tengingar"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Undirbý innsetningu"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "skuggi"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Endursníð..."
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "forsníð"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Uppsetning"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-#, fuzzy
-msgid "Save as.."
-msgstr "netþjónn"
-
-#: ../../standalone/mousedrake_.c:49
-#, fuzzy
-msgid "Please, choose the type of your mouse."
-msgstr "Hvernig mús ertu með?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ekkert serial_usb fannst\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Herma eftir þriðja hnapp?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Veldu skjákort"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Ræsitæki"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Les uppsetningarskrá"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Les uppsetningarskrá"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Veldu tungumál"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Veldu innsetningarflokk"
-
-#: ../../steps.pm_.c:16
-#, fuzzy
-msgid "Hard drive detection"
-msgstr "Nota fínstillingar á hörðum disk(um)"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Tilgreindu mús"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Veldu lyklaborð"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Setja upp skráarkerfi"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Forsníða disksneiðar"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Veldu pakka til að setja inn"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Setja kerfið inn"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Bæta við notanda"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Stilla nettengingu"
-
-#: ../../steps.pm_.c:28
-#, fuzzy
-msgid "Configure services"
-msgstr "Setja upp prentara"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Setja inn ræsihlaðara"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Búa til ræsidiskling"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Stilla X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Setja kerfið inn"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Hætta innsetningu"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Villa við að opna %s til skriftar: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Netstillingar"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Undirbý innsetningu"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Viðföng NetWare prentara"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "tæki"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Viltu prófa skilgreininguna"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Leiðbeiningar"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Sel stillingar"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Uppsetning"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Upplýsingar"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "netþjónn"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Viðföng NetWare prentara"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Leiðbeiningar"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Endursníð..."
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Margmiðlun"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Upplýsingar"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Tengipunktur"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Búið"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Veldu nýja stærð"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Viðföng fyrir fjartengda lpd prentara"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Þú getur núna gefið upp viðföng fyrir %s eininguna."
-
-#~ msgid "Low"
-#~ msgstr "Lágt"
-
-#~ msgid "Medium"
-#~ msgstr "Miðlungs"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-
-#~ msgid "mount failed"
-#~ msgstr "tókst ekki að tengja"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Margmiðlun"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "F. snillinga"
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Hérna velur þú tímasvæðið sem gildir þar sem þú býrð.\n"
-#~ "\n"
-#~ "\n"
-#~ "Linux notar GMT eða \"Greenwich Mean Time\" og breytir þeim tíma\n"
-#~ "síðan í staðartíma samkvæmt því tímasvæði sem þú velur."
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Hvaða disk viltu færa til?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Veldu pakkana sem þú vilt setja inn"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Upplýsingar"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Upplýsingar"
-
-#, fuzzy
-#~ msgid "authentification"
-#~ msgstr "Auðkenning"
-
-# ## skrytid
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Sjálfvirk tenging aukatækja"
-
-#~ msgid "Active"
-#~ msgstr "Virk"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nei"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Prentari af gerðinni \"%s\" fannst á "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Staðbundið prenttæki"
-
-#, fuzzy
-#~ msgid "Printer Device"
-#~ msgstr "Prenttæki:"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Fjartengd prentröð"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Fjartengd prentröð"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Veldu þá stærð sem þú vilt setja inn"
-
-#~ msgid "Total size: "
-#~ msgstr "Heildarstærð: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Vinsamlegast hinkrið, "
-
-#~ msgid "Total time "
-#~ msgstr "Heildar tími "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Nota þá X uppsetningu sem er til?"
-
-#, fuzzy
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Við hvaða tæki er prentarinn þinn tengdur\n"
-#~ " (Athugaðu að /dev/lp0 er það sama og LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Hvaða disk viltu færa til?"
-
-#~ msgid "New"
-#~ msgstr "Ný"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Fjarlægja"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Smelltu á disksneið"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Óljóst (%s), vertu nákvæmari\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (sjálfgefið %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Þitt val? (sjálfgefið %s  sláðu inn  `none' fyrir engan) "
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ef um algengar aðstæður er að ræða þá er rétt svar \"/dev/hda\"\n"
-#~ "(aðal diskurinn á aðal IDE rásinni)."
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Viltu prófa skilgreininguna"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Viltu prófa skilgreininguna"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Viltu prófa skilgreininguna"
-
-#, fuzzy
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Hérna eru núverandi stillingar LILO .\n"
-#~ "Þú getur bætt við fleirum eða breytt þessum."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Veldu nýja stærð"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Hvernig mús ertu með?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Veldu tungumál til að nota við innsetningu og kerfisnotkun."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Veldu snið sem passar við lyklaborðið þitt frá listanum að ofan"
-
-#, fuzzy
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Eftir óskum: Ef þú hefur þó nokkra reynslu meðiar with Linux, you "
-#~ "will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\".\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Hérna geturðu stillt innhringitengingu. Ef þú ert ekki viss um hvað þú "
-#~ "þarft,\n"
-#~ "hafðu þá samband við þjónustuveituna til að fá þær upplýsingar."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sláðu inn:\n"
-#~ "\n"
-#~ "  - IP vistfang: Ef þú veist ekki hvað það er, spurðu þá kerfisstjóra eða "
-#~ "fulltrúa hjá þjónustuveitu.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Netsía: \"255.255.255.0\" er mjög algeng sía. Ef þú ert ekki viss "
-#~ "hvaða\n"
-#~ "síu skal nota, spurðu þá kerfisstjóra eða fulltrúa þjónustuveitu.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Sjálfvirkt vistfang: Ef þú ert á neti sem notar bootp eða dhcp "
-#~ "reglurnar, veldu \n"
-#~ "þá þennan kost. Í slíkum tilfellum þarf ekki að gefa upp neitt \"IP "
-#~ "vistfang\".  Eins \n"
-#~ "og með aðrar stillingar, þá væri ekki slæm hugmynd að hafa samband við "
-#~ "kerfisstjóra.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ef NIS er notað á netinu sem þú ert á, veldu þá \"Nota NIS\". Ef þú ert "
-#~ "ekki\n"
-#~ "viss hvort það sé notað, spurðu þá kerfisstjóra netsins."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Hérna geturðu stillt innhringitengingu. Ef þú ert ekki viss um hvað þú "
-#~ "þarft,\n"
-#~ "hafðu þá samband við þjónustuveituna til að fá þær upplýsingar."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ef þú notar einhverskonar sel (e. proxy), stilltu þau þá núna. Ef þú "
-#~ "veist ekki\n"
-#~ "hvort þú þarft að still þau, hafðu þá samband við kerfisstjóra eða "
-#~ "þjónustuveitu."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Þú getur núna náð í dulritunarhugbúnað ef Internet tengingin þín er rétt\n"
-#~ "upp sett.  Fyrst velur þú þá spegilvél þaðan sem þú vilt sækja "
-#~ "hugbúnaðinn\n"
-#~ "og síðan velur þú þá pakka sem þú vilt sækja og setja inn.\n"
-#~ "\n"
-#~ "Athugaðu að velja spegilvél og dulritunarhugbúnað samkvæmt því sem lög "
-#~ "leyfa\n"
-#~ "á Íslandi eða hvar sem þú ert núna að nota tölvuna."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Hérna býrðu til rótarlykilorð fyrir Mandrake Linux kerfið (lykilorð\n"
-#~ "ofurpaursins :-). Þú verður að slá lykilorðið inn tvisvar til að \n"
-#~ "staðfesta það (svo það verði örugglega það lykilorð sem þú ætlast til).\n"
-#~ "\n"
-#~ "\n"
-#~ "Rótin (root) er stjórnandi kerfisins (kerfisstjóri) og eini notandinn\n"
-#~ "sem breytt getur stýriskrám.  Veldu lykilorðið því vandlega.  Óheimil\n"
-#~ "notkun á rótaraðgangi að kerfinu getur orðið mjög skaðleg uppsetningu\n"
-#~ "og gögnum í kerfinu ásamt öðrum tölvum sem eru tengdar við þessa.\n"
-#~ "Lykilorðið ætti að vera hæfileg blanda af bókstöfum og tölustöfum og\n"
-#~ "minnst 8 stafa langt.  Þú ættir *ekki* að skrifa það niður og ættir\n"
-#~ "því ekki að hafa það of langt eða of flókið því þá eykst hættan á\n"
-#~ "á því að þú gleymir því.  Þú þarft að geta munað hvaða lykilorð\n"
-#~ "gefur rótaraðgang til að geta breytt uppsetningu og stillingum."
-
-# ## skrytid
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-
-# ## skrytid
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Linear: Generate linear sector addresses instead of\n"
-#~ "sector/head/cylinder addresses. Linear addresses are translated at run\n"
-#~ "time and do not depend on disk geometry. Note that boot disks may not be\n"
-#~ "portable if \"linear\" is used, because the BIOS service to determine "
-#~ "the\n"
-#~ "disk geometry does not work reliably for floppy  disks. When using\n"
-#~ "\"linear\" with large disks, /sbin/lilo may generate references to\n"
-#~ "inaccessible disk areas, because 3D sector addresses are not known\n"
-#~ "before boot time.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Compact: Tries to merge read requests for adjacent sectors into a\n"
-#~ "single read request. This drastically reduces load time and keeps the\n"
-#~ "map smaller. Using \"compact\" is especially recommended when booting "
-#~ "from\n"
-#~ "a floppy disk.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "    * <number>:  use the corresponding text mode."
-
-# ## skrytid
-#, fuzzy
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "LILO main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Linear: Generate linear sector addresses instead of\n"
-#~ "sector/head/cylinder addresses. Linear addresses are translated at run\n"
-#~ "time and do not depend on disk geometry. Note that boot disks may not be\n"
-#~ "portable if \"linear\" is used, because the BIOS service to determine "
-#~ "the\n"
-#~ "disk geometry does not work reliably for floppy  disks. When using\n"
-#~ "\"linear\" with large disks, /sbin/lilo may generate references to\n"
-#~ "inaccessible disk areas, because 3D sector addresses are not known\n"
-#~ "before boot time.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Compact: Tries to merge read requests for adjacent sectors into a\n"
-#~ "single read request. This drastically reduces load time and keeps the\n"
-#~ "map smaller. Using \"compact\" is especially recommended when booting "
-#~ "from\n"
-#~ "a floppy disk.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "    * <number>:  use the corresponding text mode."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Nú er kominn tími til að stilla X, sem er undirstaða Linux notenda- \n"
-#~ "viðmótsins (GUI). Til að X virki, þá þarf að stilla skjákortið\n"
-#~ "og velja viðkomandi skjá.  Þessi atriði er þó oftast stillt\n"
-#~ "sjálfkrafa þannig að þú gætir aðeins þurft að staðfesta það\n"
-#~ "sem Mandrake Linux vill gera :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Þegar uppsetningu X er lokið þá verður X þjónninn ræstur (nema\n"
-#~ "þú biðjir DrakX að gera það ekki) svo þú getir staðfest að\n"
-#~ "stillingarnar séu viðunnandi. Ef þú ert ekki sátt(ur) við þær X\n"
-#~ "stillingar sem eru valdar, þá getur þú breytt þeim að eigin vild."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ef eitthvað kemur upp á í X, notaðu þá þessar stillingar til að stilla\n"
-#~ "það aftur."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ef þú vilt myndrænt innstimplunarviðmót, veldu þá \"Já\". Ef ekki, veldu\n"
-#~ "þá \"Nei\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Tölvan verður núna endurræst.\n"
-#~ "\n"
-#~ "Mandrake Linux verður sjálfkrafa keyrt upp.  Ef þú vilt hinsvegar\n"
-#~ "keyra upp eitthvað annað stýrikerfi, lestu þá leiðbeiningarnar\n"
-#~ "sem fylgja."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skrifa /etc/fstab"
-
-#~ msgid "Restore from floppy"
-#~ msgstr "Endurheimta frá diskling"
-
-#~ msgid "Format all"
-#~ msgstr "Forsníð"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Eftir forsníðingu allra sneiða"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "munu öll gögn á þessum disksneiðum tapast"
-
-#~ msgid "Reload"
-#~ msgstr "Endurhlaða"
-
-#~ msgid "Error reading file $f"
-#~ msgstr "Villa við lestur skráarinnar $f"
-
-#, fuzzy
-#~ msgid "ADSL configuration"
-#~ msgstr "Uppsetning"
-
-#~ msgid "Remote queue"
-#~ msgstr "Fjartengd prentröð"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Fjartengd prentröð"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Nafn léns"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Staðbundinn prentari"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Netstillingar"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "tókst ekki að tengja: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Sjálfgefið"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#, fuzzy
-#~ msgid "Adapter"
-#~ msgstr "Uppfærsla"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "USB mús"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Já, prenta ASCII prufusíðu"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Já, prenta PostScript prufusíðu"
-
-#~ msgid "Paper Size"
-#~ msgstr "Pappírsstærð"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Koma blaðsíðu út eftirá?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint rekilvalkostir"
-
-#~ msgid "Color depth options"
-#~ msgstr "Stillingar á litadýpt"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Afstalla texta (tröppurnar)?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Allar prentraðir (sem taka við prentverkum) þurfa heiti\n"
-#~ "(oft bara lp) og möppu. Hvaða heiti og möppu viltu nota fyrir\n"
-#~ "þessa prentröð?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Allar prentraðir (sem taka við prentverkum) þurfa heiti\n"
-#~ "(oft bara lp) og möppu. Hvaða heiti og möppu viltu nota fyrir\n"
-#~ "þessa prentröð?"
-
-#, fuzzy
-#~ msgid "Name of queue"
-#~ msgstr "Heiti prentraðar:"
-
-#, fuzzy
-#~ msgid "Spool directory"
-#~ msgstr "Mappa prentraðar:"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Tafla"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Tafla"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Ef þú vilt gera kerfið öruggara þá ættir þú að velja \"Nota skuggaskrá\" "
-#~ "og\n"
-#~ "\"Nota MD5 lykilorð\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ef NIS er notað á netinu sem þú ert á, veldu þá \"Nota NIS\". Ef þú ert "
-#~ "ekki\n"
-#~ "viss hvort það sé notað, spurðu þá kerfisstjóra netsins."
-
-#~ msgid "yellow pages"
-#~ msgstr "Gular síður (yp)"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Uppsetning"
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Hvaða disk viltu færa til?"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Uppsetning"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Veljið skrá"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Uppsetning: Bæta slóð við"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Lokauppsetning"
-
-#, fuzzy
-#~ msgid "Automatic dependencies"
-#~ msgstr "Athuga tengsli milli pakka"
-
-#, fuzzy
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Stilla X"
-
-#, fuzzy
-#~ msgid "Create a boot floppy"
-#~ msgstr "Búa til ræsidiskling"
-
-#, fuzzy
-#~ msgid "Choice"
-#~ msgstr "tæki"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Skjár"
-
-# ## skrytid
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "  - Use hard drive optimizations: This option can improve hard disk\n"
-#~ "accesses but is only for advanced users, it can ruin your hard drive if\n"
-#~ "used incorrectly. Use it only if you know how.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Choose security level: You can choose a security level for your\n"
-#~ "system.\n"
-#~ "    Please refer to the manual for more information.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM size if needed: In some cases, Linux is unable to\n"
-#~ "correctly detect all the installed RAM on some systems. If this is the\n"
-#~ "case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
-#~ "normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Removable media automounting: If you would prefer not to manually\n"
-#~ "mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
-#~ "\"umount\", select this option. \n"
-#~ "\n"
-#~ "\n"
-#~ "  - Enable Num Lock at startup: If you want Number Lock enabled after\n"
-#~ "booting, select this option (Note: Num Lock will still not work under\n"
-#~ "X)."
-
-#, fuzzy
-#~ msgid "Internet/Network access"
-#~ msgstr "Endursníð..."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Ýmislegt"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ýmsar spurningar:"
-
-#, fuzzy
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Stilli öryggisþrep"
-
-#, fuzzy
-#~ msgid "toot"
-#~ msgstr "Rót"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Aðal nafnamiðlari"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Vara nafnamiðlari"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Hringja inn með mótaldi"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Forritun"
-
-#, fuzzy
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Hverju viltu bæta við?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Reyna að finna mótald?"
-
-#, fuzzy
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Stilla nettengingu"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "LAN netuppsetning er þegar til staðar. Hvað viltu gera?"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Uppsetning"
-
-#, fuzzy
-#~ msgid "Internet Tools"
-#~ msgstr "Sel stillingar"
-
-#, fuzzy
-#~ msgid "Development C/C++"
-#~ msgstr "Forritun"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Tilgreina tímasvæði"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Viðföng NetWare prentara"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(getur skaðað vistuð gögn)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Kveikja á NUMLOCK við eftir ræsingu"
-
-#, fuzzy
-#~ msgid "Confirm Password"
-#~ msgstr "Lykilorð"
-
-#~ msgid "DNS server:"
-#~ msgstr "Nafnamiðlari:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Gátt (tækið):"
-
-#, fuzzy
-#~ msgid "default"
-#~ msgstr "Sjálfgefið"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Á hvaða tímasvæði ertu?"
-
-#, fuzzy
-#~ msgid "Select the size you want to install"
-#~ msgstr "Veldu þá stærð sem þú vilt setja inn"
-
-#~ msgid "Customized"
-#~ msgstr "Sérlagaða"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Nota skuggaskrá"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Nota MD5 lykilorð"
-
-#~ msgid "Package"
-#~ msgstr "Pakka"
-
-#~ msgid "Tree"
-#~ msgstr "Tré"
-
-#~ msgid "Sort by"
-#~ msgstr "Raða eftir"
-
-#~ msgid "Category"
-#~ msgstr "Flokk"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pakkar sem eru inni"
-
-#~ msgid "Available packages"
-#~ msgstr "Tiltækir pakkar"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Sýna aðeins laufblöð"
-
-#~ msgid "Expand all"
-#~ msgstr "Opna allt"
-
-#~ msgid "Collapse all"
-#~ msgstr "Loka öllu"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Bæta slóð pakkanna við"
-
-#~ msgid "Update location"
-#~ msgstr "Uppfærsluslóð"
-
-#~ msgid "Find Package"
-#~ msgstr "Finna pakka"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Finna pakka sem inniheldur skrá"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Skipta á milli innsettra og tiltækra"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Athuga tengsli milli pakka"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Eftirfarandi pakkar verða fjarlægðir"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Hvaða pakka ertu að leita að?"
-
-#~ msgid "No match"
-#~ msgstr "Ekkert fannst"
-
-#~ msgid "No more match"
-#~ msgstr "Fleira fannst ekki"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake er núna í ``lágminnis'' ham.\n"
-#~ "Það verður eyrt aftur til að leyfa skráarleit."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Hvaða skrá ertu að leita að?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Hverju ertu að leita að?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Gefðu upp nafn (t.d. `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Mappa"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Ekkert geisladrif til staðar (ekkert í /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "Slóð í möppu sem inniheldur RPM pakka"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Fyrir FTP og HTTP, þá þarftu að gefa upp staðsetningu hdlist.\n"
-#~ "Staðsetningin verður að vera miðuð við slóðina hér að ofan."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Vinsamlega tilgreindu eftirfarandi"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s er nú þegar í notkun."
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Uppfæri RPM gagnaskrána"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Fjarlægji nafnið %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Leita að \"laufblöðum\"."
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Þessi leit mun taka dálítinn tíma"
-
-#, fuzzy
-#~ msgid "ECI modem"
-#~ msgstr "F. snillinga"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Við hvaða raðtengi er músin þín tengd?"
-
-#~ msgid "Czech"
-#~ msgstr "Tékkneskt"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slóvakískt"
-
-#, fuzzy
-#~ msgid "Reconfigure local network"
-#~ msgstr "Endurstilla netstillingar núna"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Nafn tengingar"
-
-#, fuzzy
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Þýskt"
-
-#, fuzzy
-#~ msgid "What do you wish to do?"
-#~ msgstr "Hvað viltu gera?"
-
-#, fuzzy
-#~ msgid "Install/Rescue"
-#~ msgstr "Innsetning"
-
-#, fuzzy
-#~ msgid "Rescue"
-#~ msgstr "Endurstækka"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Hvaða sneiðtegund viltu?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Veldu \"Innsetning\" ef það eru engar fyrri útgáfur af Linux á tölvunni\n"
-#~ "eða ef þú vilt nota fleiri en eina dreifingu af Linux.\n"
-#~ "\n"
-#~ "Veldu \"Uppfærsla\" ef þú vilt uppfæra fyrri innsetningu af Linux "
-#~ "Mandrake:\n"
-#~ "%s eða %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Ráðlagt: Ef þú hefur aldrei sett Linux inn áður.\n"
-#~ "\n"
-#~ "  - Eftir óskum: Ef þú hefur þó nokkra reynslu meðiar with Linux, you "
-#~ "will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\".\n"
-
-#          ***********************************************
-#          ***   Hér fyrir neðan er þýðingin mín, en   ***
-#  ***********   ég fór líka aðeins yfir það sem var   ************
-#          ***   þýtt fyrir ofan.  :-)  - Þórarinn     ***
-#          *** (Ég klára þetta seinnipartinn á morgun) ***
-#          ***********************************************
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Þessi hluti hefur að geyma uppsetningu á staðarnetstengingu\n"
-#~ "(LAN) eða mótaldstengingu.\n"
-#~ "\n"
-#~ "Ef þú velur \"Staðarnetstenging\" þá mun DrakX\n"
-#~ "reyna að finna Ethernet netkortið í vélinni.  Í flestum tilvikum\n"
-#~ "finnast PCI netkort og er þá kortið strax tilbúið fyrir netuppsetningu.\n"
-#~ "Ef netkortið þitt er hinsvegar ISA kort þá er sjálfvirk uppsetning á því\n"
-#~ "ekki möguleg og þú þarft því að velja rekil af listanum sem birtist.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú ert með SCSI kort þá getur þú látið leita að því fyrst en síðan\n"
-#~ "gefið upp viðföng ef það finnst ekki.  Viðföngin sem þú þarft að nota\n"
-#~ "ættir þú að finna í leiðbeiningunum sem komu með kortinu.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú ert að setja Mandrake Linux á tölvu sem er hluti af staðarneti\n"
-#~ "þá ættir þú að fá nauðsynlegar upplýsingar fyrir tengingu hjá "
-#~ "kerfisstjóra.\n"
-#~ "Upplýsingarnar sem þú þarft til að tengjast staðarneti með TCP/IP eru:\n"
-#~ "IP vistfang, undirnetssía (netsía) og tölvunafn. Ef þú ert að\n"
-#~ "setja upp einkanet þá getur þú sjálf(ur) ákveðið hvaða vistfang,\n"
-#~ "netsíu og nafn þú notar á tölvuna.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú velur \"Mótaldstenging\" þá verður mótaldstengingin gerð klár.\n"
-#~ "DrakX mun reyna að finna mótaldið þitt en ef sú leit ber ekki árangur\n"
-#~ "þá verður þú sjálf(ur) að velja raðtengið (COM port) sem mótaldið er\n"
-#~ "tengt við."
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux getur notað margar gerðir prentara.  Prentararnir krefjast\n"
-#~ "mismunandi uppsetninga.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef prentarinn þinn er tengdur beint við tölvuna veldu þá \n"
-#~ "\"Staðbundinn prentari\". Þú þarft síðan að tilgreina við\n"
-#~ "hvaða tengi prentarinn er tengdur og velja viðeigandi síu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú vilt hafa aðgang að prentara sem tengdur er við fjarlæga UNIX vél\n"
-#~ "(eða Windows NT með LPD) þá verður þú að velja \"Fjartengdur prentari\".\n"
-#~ "Þú þarft ekki að gefa upp notandanafn eða lykilorð en þarft að vita \n"
-#~ "nafnið á prentröðinni á þeim þjón.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú vilt hafa aðgang að SMB prentara (prentara sem er tengdur við\n"
-#~ "fjarlæga Windows 9x/NT vél), þá þarftu að gefa upp SMB nafn þjónsins\n"
-#~ "sem oftast er sama og TCP/IP nafn (en þarf ekki að vera).  Einnig þarftu\n"
-#~ "IP vistfang, notandanafn, lykilorð, nafn vinnuhóps og auðvitað sjálft\n"
-#~ "nafn prentarans.  Sama gildir um NetWare prentara, nema þú þarft\n"
-#~ "ekkert vinnuhópsnafn."
-
-#, fuzzy
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Það er stranglega mælt með því að þú svarir \"Já\" hérna. Ef þú setur\n"
-#~ "Microsoft Windows inn síðar þá skrifar það yfir ræsihluta disksins og\n"
-#~ "gerir þér þar með ókleyft að ræsa Linux nema þú hafir verið búin(n)\n"
-#~ "að útbúa ræsidiskling."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Eyða breytingum?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Hvernig mús ertu með?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Sjálfvirk upplausn"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Til að finna mögulegar upplausnir munu nokkrar verða prófaðar.\n"
-#~ "Skjárinn þinn mun blikka...\n"
-#~ "Þú getur slökkt á honum ef þú vilt, tölvan flautar þegar því er lokið"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ég get reynt að finna mögulegar upplausnir (t.d: 800x600).\n"
-#~ "Stundum getur tölvan frosið við það.\n"
-#~ "Viltu prófa?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Engar leyfilegar upplausnir fundust\n"
-#~ "Prófaðu að velja annað skjákort eða skjá"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Sjálfvirk leit upplausna"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "ATI brautarmús"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse"
-#~ msgstr "USB mús"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#, fuzzy
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI brautarmús"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft brautarmús"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech brautarmús"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB mús (3 eða fleiri takkar)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft útgáfa 2.1A eða nýrri (raðtengd)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (raðtengd)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (raðtengd)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (raðtengd)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Almenn mús (raðtengd)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft samhæfð (raðtengd)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Almenn þriggja hnappa mús (raðtengd)"
-
-#, fuzzy
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "tókst ekki að tengja nfs"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Dulkóðun"
-
-#~ msgid "Show less"
-#~ msgstr "Sýna færri"
-
-#~ msgid "Show more"
-#~ msgstr "Sýna fleiri"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Hvaða lyklaborðsuppsetningu viltu?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Viltu leita að PCMCIA kortun?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Leita að %s kortum?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Leita að PCI kortum?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Leita að rótardisksneið"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Þetta er ekki rótardisksneið.  Veldu aðra."
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-# '\240' is 'á' (aacute) in cp437 encoding
-# '\224' is 'ö' (odiaeresis) in cp437 encoding.
-# '\221' is 'æ' (ae) in cp437 encoding
-# '\241' is 'í' (iacute) in cp437 encoding
-# '\242' is 'ó' (oacute) in cp437 encoding
-# '\230' is 'ý' (yacute) in cp437 encoding
-# '\243' is 'ú' (oacute) in cp437 encoding
-# there is no 'þ' nor 'ð' in cp437; changed respectively to 'th' and 'd'
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Velkomin(n) ¡ LILO st˜rikerfisr‘sistj¢rann!\n"
-#~ "\n"
-#~ "Sl du   <TAB> til ad f  lista yfir m”gulega valkosti.\n"
-#~ "\n"
-#~ "Til r‘sa einn af theim, sl du inn nafnid og s¡dan   <ENTER>\n"
-#~ "eda b¡ddu ¡ %d sek£ndur thar til sj lfgefin r‘sing hefst.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Velkomin(n) i SILO styrikerfisraesistjorann!\n"
-#~ "\n"
-#~ "Sladu a <TAB> til ad fa lista yfir moegulega valkosti.\n"
-#~ "\n"
-#~ "Til raesa einn af theim, sl du inn nafnid og sidan a <ENTER>\n"
-#~ "eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Stillingar SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Hérna eru núverandi stillingar SILO .\n"
-#~ "Þú getur bætt við fleirum eða breytt þessum."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Þetta nafn er nú þegar í notkun."
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Innsetning SILO brást sökum eftirfarandi villu:"
-
-#~ msgid "Shutting down"
-#~ msgstr "Slekk á tölvunni"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Veldu \"Innsetning\" ef það eru engar fyrri útgáfur af Linux á tölvunni\n"
-#~ "eða ef þú vilt nota fleiri en eina dreifingu af Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Veldu \"Uppfærsla\" ef þú vilt uppfæra fyrri innsetningu af Linux "
-#~ "Mandrake:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000 eða 7.0 (Air)."
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Viltu nota LILO?"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) getur ræst Linux og önnur stýrikerfi.\n"
-#~ "Venjulega finnast þau við innsetningu á Linux.  Ef þú sérð\n"
-#~ "ekki þitt kerfi þá getur þú bætt því við núna ásamt öðrum.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ef þú vilt ekki að aðrir hafi aðgang að einhverju kerfanna þá getur\n"
-#~ "þú einfaldlega fjarlægt það núna (en þá þarf ræsidiskling til að ræsa "
-#~ "það)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "Nú þegar flokkar hafa verið valdir skaltu velja hve marga \n"
-#~ "þú vilt sitja inn.  Þú getur tilgreint litla eða fulla \n"
-#~ "innsetningu af pökkum úr þeim flokkum sem þú valdir."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Ráðlagt: Ef þú hefur aldrei sett Linux inn áður.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eftir óskum: Ef þú hefur þó nokkra reynslu meðiar with Linux, you "
-#~ "will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Sæki dulritunarpakkana"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Setja upp SCSI"
-
-#~ msgid "Local LAN"
-#~ msgstr "Staðarnet(LAN)"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Stærð: %s MB"
-
-#~ msgid "changing type of"
-#~ msgstr "breyti tegund"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Eftir %s disksneiðar %s,"
-
-#~ msgid "linear"
-#~ msgstr "línulegan"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Nota línulegan ham (nauðsynlegt fyrir sum SCSI drif)"
-
-#~ msgid "User name:"
-#~ msgstr "Notandaheiti:"
-
-#~ msgid "Password:"
-#~ msgstr "Lykilorð:"
-
-#~ msgid "developer"
-#~ msgstr "forritari"
-
-#~ msgid "beginner"
-#~ msgstr "byrjandi"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "Smíði HTP ræsidisks mistókst.\n"
-#~ "Þú gætir þurft að endurræsa og slá inn ``%s'' á skipanalínuna"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Það þarf að byrja innsetningu upp á nýtt með nýju viðföngunum"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Það þarf að byrja innsetninguna upp á nýtt og ræsa með diskling"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Settu diskling í drifið til að búa til HTP ræsingu\n"
-#~ "(Öll gögn á þessum diskling tapast)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Nafnið %s er þegar í notkun"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Veldu innsetningu eða uppfærslu"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Hverskyns notkun viltu?"
diff --git a/perl-install/share/po/it.po b/perl-install/share/po/it.po
deleted file mode 100644
index 72cc40b1b..000000000
--- a/perl-install/share/po/it.po
+++ /dev/null
@@ -1,12041 +0,0 @@
-# Italian Translation of DrakX
-# Copyright (C) 1999 Mandrakesoft
-# Paolo Lorenzin <pasusu@tin.it>, 1999-2000.
-# Roberto Rosselli Del Turco <rosselli@ling.unipi.it>, 2000-2002
-# 8.0 Tech/Lang proofreading by Roberto Rosselli Del Turco <rosselli@ling.unipi.it>
-# 
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 0.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-09 18:54+0100\n"
-"Last-Translator: Roberto Rosselli Del Turco <rosselli@ling.unipi.it>\n"
-"Language-Team: Italian <it@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configura tutte le testine indipendentemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usa l'estensione Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configura solo la scheda \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configurazione multi-testine"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Il tuo sistema supporta la configurazione di più testine.\n"
-"Cosa vuoi fare?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Scegli una scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Scegli un server X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Scegli un driver X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Driver X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Che configurazione di XFree vuoi avere?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La tua scheda può avere accelerazione 3D hardware, ma solo con XFree %s.\n"
-"La tua scheda è supportata da XFree %s che potrebbe avere un miglior "
-"supporto in 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La tua scheda può avere il supporto per l'accelerazione 3D hardware con "
-"XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con accelerazione 3D hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"La tua scheda può avere l'accelerazione 3D hardware con XFree %s,\n"
-"NOTA CHE È UN SUPPORTO SPERIMENTALE E POTREBBE BLOCCARE IL TUO COMPUTER."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con accelerazione 3D hardware SPERIMENTALE"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La tua scheda può avere accelerazione 3D hardware, ma solo con XFree %s,\n"
-"NOTA CHE È UN SUPPORTO SPERIMENTALE E POTREBBE BLOCCARE IL TUO COMPUTER.\n"
-"La tua scheda è supportata da XFree %s che potrebbe avere un miglior "
-"supporto in 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installazione driver video)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configurazione di XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Scegli la quantità di memoria della tua scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Scegli le opzioni per il server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Scegli un monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"I due parametri critici sono la frequenza di refresh verticale, che è la "
-"frequenza\n"
-"con cui l'intero schermo è aggiornato, e ancora più importante la frequenza\n"
-"di sincronia orizzontale, che è la frequenza con cui le line di scansione "
-"sono mostrate. \n"
-"\n"
-"È MOLTO IMPORTANTE che tu non specifichi un tipo di monitor con una gamma di "
-"sincronia che vada oltre le capacità del tuo monitor: potresti "
-"danneggiarlo.\n"
-"Se hai dubbi, scegli un settaggio prudente."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frequenza di refresh orizzontale"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frequenza di refresh verticale"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor non configurato"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Scheda grafica non ancora configurata"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Risoluzioni non ancora selezionate"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Vuoi provare la configurazione ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Attenzione: il test di questa scheda video può bloccare il computer"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test della configurazione"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prova a modificare alcuni parametri"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Si è verificato un errore:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Uscita in %d secondi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "È il settaggio corretto?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Si è verificato un errore, prova a modificare alcuni parametri"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Risoluzione"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Seleziona risoluzione e profondità di colore"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Scheda grafica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Ancora"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo Esperto"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostra tutto"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Risoluzioni"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tipo di tastiera: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo di mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frequenza orizzontale del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresh verticale del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Scheda grafica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificazione scheda grafica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria scheda grafica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profondità di colore: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Risoluzione: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Sto preparando la configurazione di X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Cosa vuoi fare?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Cambia monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Cambia scheda grafica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Cambia opzioni server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Cambia risoluzione"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostra informazioni"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Nuovo test"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Esci"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Mantieni le modifiche?\n"
-"La configurazione corrente è:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X all'avvio"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Posso configurare il tuo computer per eseguire X automaticamente all'avvio.\n"
-"Vuoi che X venga eseguito quando riavvierai?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Per favore rientra come %s per attivare le modifiche"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Per favore esci e usa Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colori (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mila colori (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mila colori (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioni di colori (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardi di colori (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 Kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 Kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mb o più"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standard, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatibile 8514, 1024x768 a 87 Hz interlacciato (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz interlacciato, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estesa, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non-interlacciato, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta frequenza, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequenza che raggiunge 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor che raggiunge 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor che raggiunge 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primo settore della partizione di boot"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primo settore del disco rigido (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Installazione di SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Dove vuoi installare il bootloader?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Installazione di LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO con menu in modo testo"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO con menu grafico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Avvia da DOS/Windows (usando loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opzioni principali del bootloader"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader da usare"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installazione del bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo di boot"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (non funziona con vecchi BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compatta"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compatta"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Ritardo prima di avviare con l'immagine predefinita"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Password"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Password (ripeti)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limita opzioni della linea di comando"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limita"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Pulisci /tmp ad ogni avvio"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precisa la dimensione RAM se necessario (trovati %d Mb)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Abilita profili multipli"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Specifica dimensione RAM in Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L'opzione ''Limita opzioni della linea di comando'' è inutile\n"
-"senza una password"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Per favore prova di nuovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Le password non corrispondono"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Messaggio di init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Attesa dell'Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Attesa per il boot del kernel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Abilita l'avvio da CD-ROM?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Abilita boot OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Sistema operativo predefinito?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Avete deciso di installare il bootloader su una partizione.\n"
-"Questo significa che avete già un bootloader installato sul disco rigido dal "
-"quale effettuate il boot\n"
-"(ad esempio System Commander).\n"
-"\n"
-"Da quale disco effettuate il boot?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Queste sono le voci attuali.\n"
-"Puoi aggiungerne altre o cambiare quelle esistenti."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Aggiungi"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fatto"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifica"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Che tipo di voce vuoi aggiungere"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Altro OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Altro OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Altro OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Immagine"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Aggiungi"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lettura-scrittura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabella"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Non sicuro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etichetta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Predefinito"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Dimensioni Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "No Video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Rimuovi voce"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Etichetta vuota non ammessa"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Dovete indicare l'immagine di un kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Devi specificare una partizione radice"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Questa etichetta è già stata usata"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovate %s interfacce %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Ne hai un'altra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hai una qualsiasi interfaccia %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sì"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Vedi informazioni hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installazione driver per scheda %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quale driver %s dovrei provare?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"in alcuni casi, il driver %s ha bisogno di informazioni extra per "
-"funzionare\n"
-"correttamente, anche se normalmente può farne a meno. Vorresti specificare\n"
-"opzioni extra o lasciare che il driver cerchi sulla tua macchina le\n"
-"informazioni di cui ha bisogno? Occasionalmente, la ricerca bloccherà il\n"
-"computer, ma non dovrebbe causare alcun danno."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Investgazione automatica"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specifica opzioni"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Adesso potete fornire le sue opzioni al modulo %s.\n"
-"Si noti che ogni indirizzo dovrebbe essere inserito con il prefisso 0x (ad "
-"es. '0x123')."
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Adesso puoi passare le sue opzioni al modulo %s.\n"
-"Le opzioni sono in formato ''nome=valore nome2=valore2 ...''.\n"
-"Per esempio, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opzioni del modulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Caricamento del modulo %s fallito.\n"
-"Vuoi riprovare con altri parametri?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "accesso ai programmi X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "accesso agli strumenti RPM"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "permetti \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "accesso ai file di amministrazione del sistema"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s già aggiunto)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Questa password è troppo semplice"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Per favore fornisci un nome utente"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Il nome utente deve contenere solo lettere minuscole, numeri, '-' e '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Questo nome utente è già stato aggiunto"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Aggiungi utente"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Inserisci un utente\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accetta utente"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Vero nome"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome utente"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Posso configurare il tuo computer per fare automaticamente il login di un "
-"utente all'avvio.\n"
-"Vuoi sfruttare questa caratteristica?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Scegli l'utente predefinito"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Scegli il window manager da eseguire:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Per favore, scegli la lingua da utilizzare."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Potete scegliere altre lingue che saranno disponibili dopo l'installazione"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tutto"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Permetti a tutti gli utenti"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Condivisione personalizzata"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nessuna condivisione"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Il pacchetto %s deve essere installato. Volete installarlo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Potete esportare usando NFS o Samba. Quale desiderate"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Il pacchetto obbligatorio %s è assente"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annulla"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Lancia userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"La condivisione in base all'utente usa il gruppo \"fileshare\". \n"
-"Potete utilizzare userdrake per aggiungere un utente a questo gruppo."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Benvenuti cracker"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Scarso"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Normale"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Più alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Questo livello va usato con cura. Rende il sistema più facile da usare,\n"
-"ma molto delicato: non deve essere usato per una macchina connessa ad altre\n"
-"o a Internet. Non c'è nessun accesso con password."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ora le password sono abilitate, ma l'uso come computer di rete è comunque\n"
-"ancora sconsigliato."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Questo è il livello di sicurezza standard raccomandato per un computer da "
-"usare per\n"
-"connettersi a Internet come cliente."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Esistono già alcuni limiti, e ogni notte vengono eseguiti ulteriori "
-"controlli automatici."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Con questo livello di sicurezza, l'uso di questo sistema come server "
-"diventa\n"
-"possibile. La sicurezza è ora abbastanza alta per consentire l'utilizzo\n"
-"del sistema come server che accetta connessioni da molti clienti. Nota: se "
-"la vostra\n"
-"macchina è un semplice cliente su Internet, fareste meglio a scegliere un "
-"livello\n"
-"più basso."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Basato sul livello precedente, ma ora il sistema è completamente\n"
-"chiuso. Le funzioni di sicurezza sono al massimo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Scegli livello di sicurezza"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Livello di sicurezza"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Usa libsafe per i server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Una libreria che difende il sistema da attacchi del tipo \"buffer overflow\" "
-"e \"format string\"."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvenuti su %s, il selezionatore di sistemi operativi!\n"
-"\n"
-"Scegliete un sistema operativo nella lista qui sopra, o\n"
-"aspettate %d secondi per il boot predefinito.\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Benvenuti su GRUB, il selezionatore di sistemi operativi!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Usate i tasti %c e %c per evidenziare la voce che interessa."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Premete Invio per avviare il sistema operativo selezionat, 'e' per modificare"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "i comandi prima del boot, o 'c' per avere una linea di comando."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La voce evidenziata verrà avviata automaticamente in %d secondi."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "spazio insufficiente in /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu di avvio"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Non puoi installare il bootloader su una partizione %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nessun aiuto presente (per ora).\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configurazione stile di avvio"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_File"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/File/_Esci"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor NewStyle per categorie"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradizionale"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk tradizionale"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Lancia Aurora al momento del boot"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo LILO/GRUB"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Al momento state usando %s come Boot Manager.\n"
-"Cliccate su Configura per lanciare l'assistente di configurazione."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lancia il sistema X Window all'avvio"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "No, non voglio il login automatico"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sì, voglio il login automatico con questo (utente, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Non riesco ad aprire /etc/inittab in lettura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuti"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d secondi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Non posso fare degli screenshot prima del partizionamento"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Dopo 'installazione degli screenshot saranno disponibili in %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgio"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Repubblica Ceca"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Germania"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grecia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvegia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Svezia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Olanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Stati Uniti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Per favore prima fate un backup dei vostri dati"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Leggete con attenzione!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se intendete usare aboot, prestate attenzione a lasciare uno spazio libero "
-"(2048\n"
-"settori sono sufficienti) all'inizio del disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Errore"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistente"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Scegli un'azione"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Hai una grossa partizione\n"
-"(generalmente usata da Microsoft Dos/Windows).\n"
-"Per prima cosa suggerisco di ridimensionare quella partizione\n"
-"(clicca su di essa, poi clicca su \"Ridimensiona\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Per favore clicca su una partizione"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Dettagli"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "FS con journal"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vuoto"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Altro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipo di filesystem:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Usa ''%s'' invece"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Cancella"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Prima usa ''Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver cambiato tipo di partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Scegli una partizione"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Scegli un'altra partizione"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Esci"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Passa a modo Esperto"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Passa a modo Normale"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Un passo indietro"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Continuo comunque?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Esci senza salvare"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Esci senza scrivere la tabella delle partizioni?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vuoi salvare le modifiche a /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Alloca automaticamente"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Azzera tutto"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informazioni sul disco fisso"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Tutte le partizioni primarie sono usate"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Non posso aggiungere altre partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Per avere più partizioni, per favore eliminarne una per essere in grado di "
-"crearne una estesa"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Salva la tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Ripristina tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Recupera tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ricarica tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automounting di media rimovibili"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Scegli file"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La copia di sicurezza della tabella delle partizioni non ha la stessa\n"
-"dimensione. Continuo comunque?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Attenzione"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inserisci un floppy nel drive\n"
-"Tutti i dati su questo floppy saranno persi"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Provo a recuperare la tabella delle partizioni"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informazioni dettagliate"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punto di mount"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opzioni"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ridimensiona"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Sposta"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatta"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Esegui mount"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Aggiungi a RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Aggiungi a LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Esegui unmount"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Rimuovi da RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Rimuovi da LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifica RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usa per loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crea una nuova partizione"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Settore iniziale: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Dimensione in Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo di filesystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punto di mount:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferenza: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Rimuovo il file di loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Cambia il tipo di partizione"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Quale filesystem vuoi?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Passo da ext2 a ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Dove vuoi fare il mount del file loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Dove vuoi fare il mount del dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Non puoi deselezionare punti di mount perché questa partizione è usata\n"
-"per il loopback. Prima rimuovi il loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calcolo dei vincoli del filesystem FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ridimensionamento"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Questa partizione non è ridimensionabile"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Dovresti eseguire il backup di tutti i dati su questa partizione"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver ridimensionato la partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Scegli la nuova dimensione"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nuova dimensione in Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Su quale disco vuoi spostarlo?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Settore"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Su che settore vuoi spostarlo?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Spostamento"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Spostamento partizione..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Scegli un RAID esistente a cui effettuare l'aggiunta"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nuovo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Scegli un LVM esistente a cui effettuare l'aggiunta"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nome LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Questa partizione non può essere usata per il loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome file loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Assegna un nome di file"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "File già usato da un altro loopback, selezionane uno diverso"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Il file esiste già. Lo uso?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opzioni di mount"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Varie"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "livello"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "dimensione del blocco"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Fai attenzione: questa operazione è pericolosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Che tipo di partizionamento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Spiacente ma non accetterò di creare /boot così avanti sul drive (su un "
-"cilindro > 1024).\n"
-"Nel caso tu usassi LILO non funzionerebbe, o se non usassi LILO non ti "
-"servirebbe /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partizione che hai scelto di aggiungere come root (/) si trova\n"
-"fisicamente oltre il 1024esimo cilindro del disco fisso, e non hai una\n"
-"partizione /boot. Se hai intenzione di usare LILO come boot manager, "
-"accertati di creare una partizione /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Hai selezionato una partizione RAID software come root (/).\n"
-"Nessun bootloader può gestirla senza una partizione /boot.\n"
-"Perciò accertati di aggiungere una partizione /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-"La tabella delle partizioni del disco %s sta per essere scritta su disco!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Sarà necessario riavviare il sistema prima che le modifiche diventino "
-"effettive!"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Dopo aver formattato la partizione %s, tutti i dati su questa partizione "
-"saranno persi"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formattazione"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formattazione file di loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formattazione partizione %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Nascondi file"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Sposta i file sulla nuova partizione"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"La directory %s contiene già dei dati\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Sto spostando i file sulla nuova partizione"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Sto copiando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Sto cancellando: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partizione %s adesso è nota come %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lettera di drive DOS: %s (solo una supposizione)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inizia: settore %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Dimensione: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s settori"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Da cilindro %d a %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formattato\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Non formattato\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "In linea\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"File di loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partizione di boot predefinita\n"
-"    (per boot MS-DOS, non per lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Livello %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Dimensione del blocco %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dischi RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome file di loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Molto probabilmente questa partizione è\n"
-"una partizione Driver, è meglio\n"
-"non toccarla.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Questa speciale partizione di boot\n"
-"viene utilizzata per effettuare\n"
-"il dual-boot del tuo sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Dimensione: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindri, %s testine, %s settori\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dischi LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo tabella delle partizioni: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "su bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opzioni: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Chiave di crittazione del filesystem"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Scegliete la chiave di crittazione del filesystem"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Questa chiave di crittazione è troppo semplice (deve essere lunga almeno %d "
-"caratteri)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Le chiavi di crittazione non corrispondono"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Chiave di crittazione"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Chiave di crittazione (di nuovo)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Cambia tipo"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Per favore clicca su un supporto"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Ricerca server"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formattazione di %s fallita"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Non so come formattare %s in tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "il mount della partizione %s sulla directory %s non è riuscito"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck è fallito con codice di uscita %d o segnale %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "errore in fase di unmount di %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "semplice"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "con /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Non puoi usare JFS per partizioni più piccole di 16 Mb"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Non puoi usare ReiserFS per partizioni più piccole di 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "I punti di mount devono iniziare con /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "C'è già una partizione con il punto di mount %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Non puoi usare un Volume Logico LVM per il punto di mount %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Questa directory dovrebbe rimanere all'interno del filesystem root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "è un vero filesystem (ext2, reiserfs) per questa punto di mount\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Non puoi usare un filesystem crittato per il punto di mount %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Non c'è abbastanza spazio libero per l'allocazione automatica"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nulla da fare"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Errore aprendo %s in scrittura: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Si è verificato un errore - non è stato trovata alcuna unità valida su cui "
-"creare nuovi filesystem. Per favore controlla il tuo hardware per stabilire "
-"la causa di questo problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Non hai alcuna partizione!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux è un sistema operativo multiutente, e questo significa che\n"
-"ciascun utente può disporre di una configurazione personalizzata, di uno\n"
-"spazio per i propri file, e così via; consultate il ''Manuale dell'utente''\n"
-"per saperne di più. Ma, a differenza di \"root\", che è l'amministratore\n"
-"del sistema, gli utenti che aggiungerete adesso non avranno il diritto di\n"
-"cambiare nulla, se non i propri file e la propria configurazione. Dovrete\n"
-"crearne almeno uno per voi stessi, e dovreste usare quello per l'uso\n"
-"quotidiano: per quanto sia molto comodo entrare nel sistema come \"root\"\n"
-"tutti i giorni, potrebbe anche essere molto pericoloso! Anche un errore\n"
-"banale potrebbe significare un sistema non più in grado di funzionare\n"
-"correttamente. Se, invece, commettete un errore, anche grave, in qualità di\n"
-"utente normale, potreste perdere parte dei vostri dati, ma non\n"
-"compromettere l'intero sistema.\n"
-"\n"
-"Prima di tutto, inserite il vostro nome reale. Naturalmente questo non è\n"
-"obbligatorio: potete digitare quello che volete. Fatto questo, DrakX\n"
-"prenderà la prima parola che avete inserito nel campo di testo e la copierà\n"
-"alla voce \"Nome utente\". Questo è il nome che l'utente dovrà usare per\n"
-"accedere al sistema, ma potete cambiarlo. Poi digitate una password per\n"
-"questo utente. La password di un utente non privilegiato dal punto di vista\n"
-"della sicurezza non è cruciale come quella di \"root\", ovviamente, ma non\n"
-"c'è motivo di essere frettolosi: dopo tutto, si tratta dei vostri file.\n"
-"\n"
-"Se cliccate su \"Accetta utente\", potrete poi aggiungerne un altro, e\n"
-"altri ancora, a vostra discrezione. Aggiungete un utente per ciascuno dei\n"
-"vostri amici, oppure per vostro padre e vostro fratello, ad esempio. Dopo\n"
-"aver aggiunto tutti gli utenti che volete, selezionate \"Fatto\".\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" potrete cambiare la \"shell\" per\n"
-"quell'utente (come opzione predefinita è bash)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"In alto potete vedere l'elenco delle partizioni Linux individuate sul\n"
-"vostro disco rigido. Potete attenervi alle scelte fatte dall'assistente,\n"
-"vanno bene per la maggior parte delle installazioni. Se fate dei\n"
-"cambiamenti, ricordate che dovete definire per lo meno una partizione root\n"
-"(''radice'') (\"/\"). Non scegliete una partizione troppo piccola,\n"
-"altrimenti non sarete in grado di installare parte del software. Se volete\n"
-"archiviare i vostri dati su una partizione separata, dovrete creare anche\n"
-"una partizione per \"/home\" (questo è possibile soltanto se avete a\n"
-"disposizione più di una partizione Linux).\n"
-"\n"
-"Ogni partizione è elencata in base a queste caratteristiche: \"Nome\",\n"
-"\"Capacità\".\n"
-"\n"
-"Il \"Nome\" è strutturato in: \"tipo di disco rigido\", \"numero del\n"
-"disco\", \"numero della partizione\" (ad esempio, \"hda1\").\n"
-"\n"
-"Il \"tipo di disco rigido\" è \"hd\" se il vostro disco è di tipo IDE, e\n"
-"\"sd\" se, invece, è un disco SCSI.\n"
-"\n"
-"Il \"numero del disco\" è sempre una lettera che segue \"hd\" o \"sd\". Per\n"
-"i dischi IDE:\n"
-"\n"
-" * \"a\" significa \"disco rigido master sul controller IDE primario\";\n"
-"\n"
-" * \"b\" means \"disco rigido slave sul controller IDE primario\";\n"
-"\n"
-" * \"c\" means \"disco rigido master sul controller IDE secondario\";\n"
-"\n"
-" * \"d\" means \"disco rigido slave sul controller IDE secondario\".\n"
-"\n"
-"Per i dischi rigidi di tipo SCSI, invece, una \"a\" significa \"ID SCSI\n"
-"più\", una \"b\" significa \"ID SCSI superiore ad a\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"La distribuzione Mandrake Linux è suddivisa su più CD-ROM. DrakX sa se uno\n"
-"dei pacchetti selezionati si trova su un altro CD-ROM, pertanto provvederà\n"
-"a espellere il CD attualmente inserito nel lettore e a chiedervi di\n"
-"inserire quello corretto."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Adesso è il momento di indicare i programmi che volete siano installati sul\n"
-"vostro sistema. Ci sono migliaia di programmi disponibili per Mandrake\n"
-"Linux, e nessuno si aspetta che li conosciate tutti a memoria.\n"
-"\n"
-"Se state effettuando un'installazione standard da CD-ROM, per prima cosa vi\n"
-"verrà chiesto di specificare quali sono i CD in vostro possesso (solo se\n"
-"siete in modalità Esperto): controllate i CD della distribuzione, cliccate\n"
-"sulle caselle corrispondenti ai CD che avete e infine sul pulsante \"Ok\"\n"
-"quando siete pronti per continuare.\n"
-"\n"
-"I pacchetti sono organizzati in gruppi corrispondenti a usi particolari\n"
-"della vostra macchina. I gruppi sono a loro volta divisi in quattro\n"
-"sezioni:\n"
-"\n"
-" * \"Workstation\": scegliete uno o più dei gruppi di questa sezione se la\n"
-"vostra macchina verrà utilizzata prevalentemente come workstation.\n"
-"\n"
-" * \"Sviluppo\": se la macchina verrà usata per lo sviluppo di software\n"
-"scegliete i gruppi appropriati.\n"
-"\n"
-" * \"Server\": se il computer sarà usato come server, qui potrete scegliere\n"
-"i servizi più comuni da installare.\n"
-"\n"
-" * \"Ambiente grafico\": scegliete qui il vostro ambiente grafico "
-"preferito.\n"
-"Indicatene almeno uno se desiderate avere una workstation grafica!\n"
-"\n"
-"Spostando il puntatore del mouse sul nome di un gruppo verrà mostrato un\n"
-"breve testo di informazioni riguardo quest'ultimo. Se state effettuando\n"
-"un'installazione normale (non un aggiornamento) e deselezionate tutti i\n"
-"gruppi, comparirà una finestra di dialogo che vi proporrà alcune opzioni\n"
-"relative a un'installazione ''minima'':\n"
-"\n"
-" * \"With X\": installa i pacchetti strettamente necessari per avere un\n"
-"ambiente grafico funzionante;\n"
-"\n"
-" * \"With basic documentation\": installa il sistema base più le utilità di\n"
-"base e la relativa documentazione; questo tipo di installazione è utile se\n"
-"si vuole configurare un server;\n"
-"\n"
-" * \"Truly minimal install\": provvederà all'installazione dello stretto\n"
-"necessario per avere un sistema Linux funzionante, avente come unica\n"
-"interfaccia la linea di comando.\n"
-"\n"
-"Se lo desiderate, potete abilitare l'opzione \"Selezione individuale dei\n"
-"pacchetti\". Questa è utilissima se conoscete bene i pacchetti presenti\n"
-"nella distribuzione o se desiderate avere il totale controllo di ciò che\n"
-"verrà installato.\n"
-"\n"
-"Se avete cominciato l'installazione in modalità \"Aggiornamento\", potete\n"
-"deselezionare tutti i gruppi per evitare di installare nuovi pacchetti, in\n"
-"questo modo effettuerete soltanto il ripristino o l'aggiornamento del\n"
-"sistema esistente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Ora, se avete scelto di indicare i pacchetti su base individuale, potete\n"
-"vedere una struttura ad albero contenente tutti i pacchetti organizzati in\n"
-"gruppi e sotto-gruppi. Mentre sfogliate questa lista gerarchica potete\n"
-"selezionare interi gruppi, sotto-gruppi o singoli pacchetti.\n"
-"\n"
-"Quando selezionate un pacchetto all'interno dell'albero, ne compare una\n"
-"descrizione sulla destra. Una volta terminata la scelta, cliccate sul\n"
-"pulsante \"Installa\" che provvederà a far partire l'installazione vera e\n"
-"propria. Il tempo necessario varia in base al numero di pacchetti che\n"
-"devono essere installati e alla velocità del vostro hardware, l'attesa\n"
-"potrebbe anche essere lunga. Una stima del tempo richiesto per finire\n"
-"l'installazione è visibile sullo schermo, in questo modo potrete sapere se\n"
-"avete tempo a sufficienza per godervi una tazza di caffé.\n"
-"\n"
-"!! Se avete selezionato un pacchetto che offre un servizio come server\n"
-"(intenzionalmente, oppure perché faceva parte di un gruppo), vi verrà\n"
-"chiesta conferma riguardo una sua effettiva installazione. Come opzione\n"
-"predefinita, in Mandrake Linux tutti i servizi installati vengono avviati\n"
-"automaticamente al momento del boot. Anche se si tratta di servizi sicuri\n"
-"al momento in cui è stata rilasciata questa versione della distribuzione,\n"
-"potrebbe succedere che vengano scoperte delle falle di sicurezza in un\n"
-"momento successivo. Se poi non avete proprio idea di quale sia la funzione\n"
-"di uno di questi pacchetti, cliccate sul pulsante \"No\". Cliccando su\n"
-"\"Sì\" i servizi elencati verranno installati e saranno attivati in maniera\n"
-"automatica. !!\n"
-"\n"
-"L'opzione \"Mostra i pacchetti selezionati automaticamente\" vi permette di\n"
-"disabilitare la finestra di dialogo che compare tutte le volte che il\n"
-"programma di installazione seleziona automaticamente uno o più pacchetti.\n"
-"Il programma determina in modo automatico, infatti, quali sono i pacchetti\n"
-"che sono indispensabili a un dato pacchetto (''dipendenze'') perché\n"
-"quest'ultimo possa essere installato con successo.\n"
-"\n"
-"Il piccolo dischetto floppy in fondo alla lista vi permette di caricare una\n"
-"lista di pacchetti scelti durante una precedente installazione. Cliccando\n"
-"su questa icona vi verrà chiesto di inserire un floppy che avrete creato\n"
-"alla fine di un'altra installazione. Consultate le informazioni che\n"
-"riguardano l'ultimo passo del processo di installazione per sapere come\n"
-"creare questo dischetto."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Se desiderate connettere il vostro computer a Internet o a una rete locale,\n"
-"assicuratevi di scegliere l'opzione corretta. Accendete la periferica che\n"
-"dovrete usare per connettervi prima di scegliere l'opzione adeguata, per\n"
-"permettere a DrakX di individuarla automaticamente.\n"
-"\n"
-"Mandrake Linux vi permette di configurare la vostra connessione a Internet\n"
-"durante il processo di installazione. Le connessioni disponibili sono:\n"
-"modem tradizionale, modem ISDN, connessione ADSL, cable modem, e infine una\n"
-"semplice connessione a una LAN (Ethernet).\n"
-"\n"
-"Non possiamo descrivere in dettaglio le caratteristiche di ogni\n"
-"configurazione. In ogni caso, accertatevi di avere a portata di mano tutti\n"
-"i parametri indicati dal vostro fornitore di servizi internet o dal vostro\n"
-"amministratore di sistema.\n"
-"\n"
-"Per maggiori dettagli riguardo la configurazione della connessione a\n"
-"Internet potete consultare il relativo capitolo del ''User Guide''; in\n"
-"alternativa, potete attendere di aver portato a termine l'installazione e\n"
-"usare poi il programma descritto in tale capitolo per configurare la\n"
-"connessione.\n"
-"\n"
-"Se desiderate configurare la rete dopo aver terminato l'installazione, o se\n"
-"avete già configurato la vostra rete, cliccate su \"Annulla\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"A questo punto potete scegliere i servizi da lanciare automaticamente\n"
-"all'avvio del sistema.\n"
-"\n"
-"Qui sono elencati tutti i servizi disponibili con l'installazione attuale.\n"
-"Esaminateli attentamente e disabilitate quelli che non sono sempre\n"
-"necessari all'avvio.\n"
-"\n"
-"Selezionando un servizio comparirà un breve testo di aiuto che ne spiega le\n"
-"caratteristiche. Se non siete realmente sicuri dell'utilità o meno di un\n"
-"servizio, è più prudente non modificare le impostazioni predefinite.\n"
-"\n"
-"!! In questa fase dell'installazione dovete fare le vostre scelte con\n"
-"particolare attenzione nel caso intendiate usare il vostro computer come\n"
-"server: probabilmente non volete che siano abilitati servizi di cui non\n"
-"avete bisogno. Ricordate che numerosi servizi sono potenzialmente\n"
-"pericolosi se attivi su un server. Come regola generale, selezionate\n"
-"soltanto quelli di cui avete effettivamente bisogno. !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux gestisce il tempo in base al GMT (''Greenwich Manage Time'') e lo\n"
-"traduce nell'ora locale in base al fuso orario selezionato. Tuttavia è\n"
-"possibile disabilitare questa opzione togliendo il segno di spunta alla\n"
-"casella \"Hardware clock set to GMT\", in modo che l'orologio hardware sia\n"
-"lo stesso dell'orologio di sistema. Questa scelta può tornare utile nel\n"
-"caso sulla macchina sia installato un altro sistema operativo, ad esempio\n"
-"Windows.\n"
-"\n"
-"L'opzione \"Automatic time synchronization\" provvederà a gestire l'ora\n"
-"grazie alla connessione con un server del tempo remoto via Internet.\n"
-"Scegliete un server vicino a voi nella lista che vi verrà mostrata. Perché\n"
-"questa opzione funzioni, naturalmente, dovete disporre di una connessione a\n"
-"Internet funzionante. Sulla vostra macchina verrà installato un server del\n"
-"tempo che potrà essere usato anche per altre macchine che si trovano sulla\n"
-"vostra rete locale."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (che sta per ''X Window System'') è il cuore dell'interfaccia grafica di\n"
-"GNU/Linux, sulla quale sono basati tutti gli ambienti grafici che sono\n"
-"inclusi in Mandrake Linux (KDE, GNOME, AfterStep, WindowMaker, etc.). In\n"
-"questa sezione, DrakX tenterà di configurare X automaticamente.\n"
-"\n"
-"È molto raro che non abbia successo: l'unico caso in cui ciò potrebbe\n"
-"accadere è se l'hardware in questione è molto vecchio (o molto recente). Se\n"
-"l'operazione riesce, DrakX lancerà X automaticamente, con la miglior\n"
-"risoluzione possibile, in base alle dimensioni del monitor. A quel punto,\n"
-"comparirà una finestra che vi chiederà se potete vederla.\n"
-"\n"
-"Se state effettuando un'installazione in modo \"Esperto\", verrà lanciato\n"
-"l'assistente di configurazione di X. Consultate la sezione del manuale\n"
-"dedicata a questo assistente per avere più informazioni al riguardo.\n"
-"\n"
-"Se potete vedere il messaggio e rispondete \"Sì\", allora DrakX passerà\n"
-"alla fase successiva. Se non potete vedere il messaggio, significa che la\n"
-"configurazione non andava bene, e il test terminerà automaticamente dopo 10\n"
-"secondi, riportandovi alla schermata precedente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Può verificarsi il caso che il primo tentativo non sia quello giusto (lo\n"
-"schermo è troppo piccolo, spostato a destra o a sinistra...). Questo è il\n"
-"motivo per cui, anche se X viene lanciato correttamente, DrakX vi chiederà\n"
-"subito dopo se la configurazione va bene, e vi proporrà di cambiarla\n"
-"elencando una lista di modi video validi (in base a quello che ha potuto\n"
-"accertare) chiedendovi di sceglierne uno.\n"
-"\n"
-"Come ultima risorsa, se proprio non riuscite a far funzionare X, scegliete\n"
-"\"Cambia scheda grafica\", selezionate \"Unlisted card\", e quando vi verrà\n"
-"chiesto quale server desiderate utilizzare, scegliete \"FBDev\": si tratta\n"
-"di un'opzione a prova d'errore, che funziona con qualsiasi scheda grafica\n"
-"moderna. Quindi scegliete \"Nuovo test\" per essere sicuri."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Infine DrakX vi chiederà se desiderate utilizzare l'interfaccia grafica una\n"
-"volta terminato il processo di avvio del sistema. Notate che questa domanda\n"
-"verrà fatta anche se avete deciso di non provare la configurazione.\n"
-"Ovviamente dovrete scegliere \"No\" se la vostra macchina dovrà svolgere il\n"
-"ruolo di server, o se non siete riusciti a ottenere una configurazione\n"
-"corretta."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Il CD-ROM di Mandrake Linux ha una modalità ''salvataggio'' preconfigurata.\n"
-"Potete accedervi effettuando il boot dal CD-ROM, premendo il tasto >>F1<<\n"
-"all'avvio e digitando >>rescue<< dal prompt. Ma se il vostro computer non\n"
-"può essere avviato dal CD-ROM, dovete effettuare questa operazione (la\n"
-"creazione di un disco di avvio) per almeno due ragioni:\n"
-"\n"
-" * DrakX riscriverà il settore di boot (MBR) del vostro disco principale (a\n"
-"meno che voi non usiate un altro gestore del boot), in modo che possiate\n"
-"avviare sia Windows che GNU/Linux, se sul vostro sistema è installato anche\n"
-"Windows. Tuttavia, se in futuro si renderà necessario re-installare\n"
-"Windows, il programma di installazione Microsoft riscriverà il settore di\n"
-"boot, e di conseguenza non sarete più in grado di avviare GNU/Linux!\n"
-"\n"
-" * se si verifica un problema per cui non potete più lanciare GNU/Linux dal\n"
-"disco rigido, questo dischetto sarà l'unico mezzo per avviare GNU/Linux:\n"
-"contiene un buon numero di programmi di amministrazione del sistema per\n"
-"rimettere in sesto un'installazione che ha subito abbia crash per\n"
-"un'interruzione di corrente, uno sfortunato errore di battitura, una\n"
-"password dimenticata o qualsiasi altra ragione.\n"
-"\n"
-"Quando cliccherete su \"Sì\", vi verrà chiesto di inserire un disco in un\n"
-"lettore di floppy. Naturalmente il dischetto che utilizzerete deve essere\n"
-"vuoto o contenere soltanto dati di cui non avete più bisogno. Non sarà\n"
-"necessario formattarlo: DrakX riscriverà l'intero disco."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"A questo punto dovete scegliere dove installare il vostro sistema operativo\n"
-"Mandrake Linux sul disco rigido. Se il vostro disco è vuoto, oppure se un\n"
-"sistema operativo esistente sta usando tutto lo spazio disponibile, allora\n"
-"dovrete partizionarlo. In breve, partizionare un disco rigido consiste nel\n"
-"suddividerlo logicamente in maniera da creare lo spazio sufficiente per\n"
-"installare il vostro nuovo sistema operativo Mandrake Linux.\n"
-"\n"
-"Dato che gli effetti del partizionamento sono di solito irreversibili,\n"
-"questa operazione può intimidire e rivelarsi stressante per un utente\n"
-"inesperto. Fortunatamente, avete a vostra disposizione un assistente che\n"
-"semplifica questo passo. Prima di iniziare leggete attentamente il manuale,\n"
-"e prendete tutto il tempo che vi serve.\n"
-"\n"
-"Se state effettuando l'installazione in modalità Esperto, verrà lanciato\n"
-"DiskDrake, il programma di gestione e partizionamento dei dischi rigidi di\n"
-"Mandrake Linux, che vi permetterà di configurare accuratamente le vostre\n"
-"partizioni. Consultate il capitolo relativo a DiskDrake nel manuale. Dal\n"
-"programma di installazione potete richiamare gli assistenti descritti qui\n"
-"di seguito cliccando sul pulsante \"Assistente\" (ingl. ''Wizard'').\n"
-"\n"
-"Se le partizioni sono già state definite (per una precedente installazione,\n"
-"o da un'altra utilità di partizionamento), dovrete solo scegliere quelle da\n"
-"usare per installare il vostro sistema Linux.\n"
-"\n"
-"Se le partizioni non sono ancora state definite, dovete crearle usando\n"
-"l'assistente. In base alla configurazione del vostro disco rigido, saranno\n"
-"disponibili diverse soluzioni:\n"
-"\n"
-" * \"Usa spazio disponibile\": questa opzione causerà un partizionamento\n"
-"automatico del vostro disco rigido (o dischi, se ne avete più di uno). Non\n"
-"vi verrà posta nessun'altra domanda.\n"
-"\n"
-" * \"Usa partizioni esistenti\": l'assistente ha trovato una o più\n"
-"partizioni Linux sul vostro disco rigido. Se desiderate usarle scegliete\n"
-"questa opzione.\n"
-"\n"
-" * \"Usa lo spazio libero nella partizione Windows\": se MicrosoftWindows è\n"
-"installato sul vostro disco rigido e occupa tutto lo spazio disponibile,\n"
-"dovrete creare spazio libero per i dati relativi a Linux. Per farlo potete\n"
-"cancellare la vostra partizione MicrosoftWindows e i dati che contiene\n"
-"(usando le soluzioni \"Cancella l'intero disco\" o \"Modo Esperto\"),\n"
-"oppure ridimensionarla. Il ridimensionamento può essere effettuato evitando\n"
-"la perdita di dati a patto che prima di procedere la partizione Windows sia\n"
-"stata deframmentata. Vi raccomandiamo anche di fare un backup dei vostri\n"
-"dati. Questa è la soluzione consigliata se desiderate usare sia Mandrake\n"
-"Linux sia MicrosoftWindows sullo stesso computer.\n"
-"\n"
-"   Prima di scegliere questa opzione, tenete presente che la dimensione "
-"della\n"
-"partizione su cui risiede MicrosoftWindows sarà ridotta rispetto a quella\n"
-"attuale. Significa che avrete meno spazio libero per archiviare i vostri\n"
-"dati o installare nuovo software su Windows.\n"
-"\n"
-" * \"Cancella l'intero disco\": se desiderate cancellare tutti i dati e\n"
-"tutte le partizioni presenti sul vostro disco rigido e rimpiazzarli con il\n"
-"vostro nuovo sistema Mandrake Linux, potete selezionare questa opzione.\n"
-"Fate attenzione nello scegliere questa soluzione, dopo la conferma non\n"
-"potrete più tornare indietro.\n"
-"\n"
-"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
-"persi. !!\n"
-"\n"
-" * \"Cancella Windows\": l'effetto di questa opzione sarà di cancellare\n"
-"tutto quello che si trova sul disco e di ricominciare da capo, creando le\n"
-"partizioni su un disco vuoto. Tutti i dati presenti sul vostro disco\n"
-"andranno persi.\n"
-"\n"
-"   !! Se scegliete questa opzione, tutti i dati sul vostro disco andranno\n"
-"persi. !!\n"
-"\n"
-" * \"Modo Esperto\": se volete partizionare manualmente il vostro disco\n"
-"rigido potete scegliere questa opzione. Fate attenzione prima di optare per\n"
-"questa soluzione: è potente, ma molto pericolosa. Potreste facilmente\n"
-"causare la perdita di tutti i vostri dati. Quindi, non scegliete questa\n"
-"soluzione se non sapete cosa state facendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Ecco fatto: l'installazione è terminata, e il vostro sistema GNU/Linux è\n"
-"pronto per essere usato. Dovete soltanto cliccare sul pulsante \"OK\" per\n"
-"riavviare il sistema. Potete lanciare GNU/Linux o Windows (se presente),\n"
-"qualunque preferiate dei due, non appena il computer avrà terminato di\n"
-"effettuare il boot.\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" (solo in modalità Esperto) avrete altri\n"
-"due pulsanti a vostra disposizione:\n"
-"\n"
-" * \"Crea il floppy di auto installazione\": per creare un floppy di\n"
-"installazione che permette di eseguire automaticamente un' installazione\n"
-"completa, del tutto simile a quella che avete appena finito di configurare,\n"
-"senza che sia necessario l'intervento di un operatore.\n"
-"\n"
-"   Notate che, dopo aver cliccato sul pulsante, saranno disponibili due\n"
-"opzioni diverse:\n"
-"\n"
-"    * \"Ripeti\": questa è un'installazione automatizzata solo in parte, in\n"
-"quanto la fase di partizionamento del disco (e solo quella) resta\n"
-"interattiva.\n"
-"\n"
-"    * \"Automatizzata\": l'installazione è completamente automatizzata: il\n"
-"disco rigido viene riscritto per intero, tutti tutti i dati che contiene\n"
-"andranno persi.\n"
-"\n"
-"   Questa caratteristica è molto utile quando si deve installare il sistema "
-"su\n"
-"un gran numero di macchine dalle caratteristiche simili. Si veda la sezione\n"
-"Installazione automatica sul nostro sito web.\n"
-"\n"
-" * \"Salva scelta pacchetti\"(*): salva la selezione dei pacchetti\n"
-"effettuata in precedenza. Al momento di effettuare un'altra installazione,\n"
-"potrete inserire il dischetto nel lettore e installare il sistema\n"
-"richiamando lo schermo di aiuto (premendo [F1]) e digitando >>linux\n"
-"defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Sarà necessario un dischetto formattato con il filesystem FAT: per\n"
-"formattarne uno sotto GNU/Linux digitate \"mformat a:\""
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Qualsiasi partizione appena definita deve essere formattata prima di poter\n"
-"essere usata (formattare significa creare un filesystem).\n"
-"\n"
-"Potreste anche voler riformattare alcune partizioni preesistenti, per\n"
-"cancellare i dati che contengono. Se desiderate farlo, scegliete qui le\n"
-"partizioni che intendete formattare.\n"
-"\n"
-"Tenete presente che non è necessario riformattare tutte le partizioni\n"
-"preesistenti. Dovete formattare le partizioni che contengono il sistema\n"
-"operativo (come \"/\", \"/usr\" o \"/var\"), ma potete evitare di\n"
-"riformattare partizioni che contengono dati che desiderate conservare\n"
-"(tipicamente \"/home\").\n"
-"\n"
-"Fate molta attenzione nella scelta delle partizioni, dopo la formattazione\n"
-"tutti i dati saranno cancellati e non potrete recuperarli.\n"
-"\n"
-"Cliccate su \"Ok\" quando siete pronti a formattare le partizioni.\n"
-"\n"
-"Cliccate su \"Annulla\" se desiderate scegliere altre partizioni sulle\n"
-"quali installare il vostro nuovo sistema operativo Mandrake Linux.\n"
-"\n"
-"Cliccate su \"Avanzato\" se desiderate che le partizioni selezionate\n"
-"vengano controllate per accertare la presenza di eventuali blocchi\n"
-"danneggiati."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Il vostro sistema operativo Mandrake Linux è in corso d'installazione. In\n"
-"base al numero di pacchetti che devono essere installati e alla velocità\n"
-"del vostro computer, questa operazione potrebbe durare pochi minuti o\n"
-"richiedere un tempo molto lungo.\n"
-"\n"
-"Abbiate pazienza, per favore."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"È molto probabile che, al momento in cui state installando Mandrake Linux,\n"
-"alcuni pacchetti siano stati aggiornati rispetto alla versione iniziale.\n"
-"Potrebbe trattarsi di un ''bug fix'', o della soluzione di problemi\n"
-"relativi alla sicurezza. Per permettervi di beneficiare di questi\n"
-"aggiornamenti vi verrà proposto di scaricare la nuova versione dei\n"
-"pacchetti usando Internet. Scegliete \"Sì\" se potete contare su una\n"
-"connessione a Internet funzionante, oppure \"No\" se preferite installare i\n"
-"pacchetti aggiornati in un secondo momento.\n"
-"\n"
-"Se scegliete \"Sì\" comparirà una lista di siti da cui è possibile\n"
-"scaricare i pacchetti aggiornati. Selezionate quello più vicino a voi. A\n"
-"questo punto comparirà una finestra di selezione pacchetti: controllate la\n"
-"lista e cliccate su \"Installa\" per scaricare e installare i pacchetti, o\n"
-"su \"Annulla\" per annullare l'operazione."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Prima di proseguire dovreste leggere con attenzione le condizioni d'uso;\n"
-"queste riguardano l'intera distribuzione Mandrake Linux, e se non siete\n"
-"d'accordo con qualche punto della licenza cliccate sul pulsante\n"
-"\"Rifiuta\": la procedura di installazione sarà immediatamente interrotta.\n"
-"Per proseguire con l'installazione, invece, cliccate sul pulsante\n"
-"\"Accetta\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Ora è il momento di scegliere il livello di sicurezza desiderato per il\n"
-"vostro sistema. Come regola generale, quanto più esposta è la macchina e\n"
-"quanto più sono importanti i dati che contiene, tanto più alto dovrebbe\n"
-"essere il livello di sicurezza. Tenete presente, tuttavia, che un livello\n"
-"di sicurezza molto alto in genere viene ottenuto a spese della facilità\n"
-"d'uso. Consultate il capitolo MSEC nel ''Manuale di riferimento'' per avere\n"
-"ulteriori informazioni in merito al significato di tali livelli.\n"
-"\n"
-"Se non sapete cosa scegliere, mantenete l'opzione predefinita."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"A questo punto, dovete decidere quali partizioni devono essere usate per\n"
-"l'installazione del vostro sistema Mandrake Linux. Se sono già state\n"
-"definite delle partizioni, grazie a una precedente installazione di\n"
-"GNU/Linux o usando un altro programma di partizionamento, potete utilizzare\n"
-"le partizioni esistenti. In caso contrario, sarà necessario creare o\n"
-"modificare le partizioni del disco rigido.\n"
-"\n"
-"Per creare delle partizioni dovete, per prima cosa, selezionare un disco\n"
-"rigido. Potete scegliere il disco da partizionare cliccando su \"hda\" per\n"
-"il primo disco IDE, \"hdb\" per il secondo, \"sda\" per il primo disco\n"
-"SCSI, e così via.\n"
-"\n"
-"Per partizionare il disco selezionato potete scegliere fra queste opzioni:\n"
-"\n"
-" * \"Cancella tutto\": questa opzione cancella tutte le partizioni presenti\n"
-"sul disco selezionato.\n"
-"\n"
-" * \"Alloca automaticamente\": questa opzione vi permette di creare\n"
-"automaticamente partizioni di sistema e di swap nello spazio libero\n"
-"presente sul vostro disco rigido.\n"
-"\n"
-" * \"Ancora\": permette di accedere a funzionalità avanzate:\n"
-"\n"
-"    * \"Salva tabella delle partizioni\": salva la tabella delle partizioni "
-"su\n"
-"un floppy. Utile per recuperarla in un momento successivo, se necessario.\n"
-"Vi raccomandiamo caldamente di effettuare questa operazione.\n"
-"\n"
-"    * \"Ripristina tabella delle partizioni\": permette di ripristinare una\n"
-"tabella delle partizioni precedentemente salvata su floppy disk.\n"
-"\n"
-"    * \"Recupera tabella delle partizioni\": se la vostra tabella delle\n"
-"partizioni è danneggiata potete provare a recuperarla grazie a questa\n"
-"opzione. Procedete con attenzione, e ricordate che potrebbe non avere\n"
-"successo.\n"
-"\n"
-"    * \"Ricarica tabella delle partizioni\": annulla tutte le modifiche e\n"
-"ricarica la tabella delle partizioni originaria.\n"
-"\n"
-"    * \"Removable media automounting\": se disabilitate questa opzione gli\n"
-"utenti saranno costretti a montare e smontare manualmente i dispositivi\n"
-"rimovibili come lettori floppy e CD-ROM.\n"
-"\n"
-" * \"Assistente\": usate questa opzione se desiderate che il "
-"partizionamento\n"
-"del disco sia effettuato con l'aiuto di un assistente. Altamente\n"
-"raccomandata se non avete una buona conoscenza del partizionamento.\n"
-"\n"
-" * \"Un passo indietro\": con questa opzione le modifiche apportate "
-"verranno\n"
-"annullate.\n"
-"\n"
-" * \"Passa a modo Esperto\": permette di effettuare ulteriori azioni sulle\n"
-"partizioni (tipo, opzioni, formattazione) e offre più informazioni.\n"
-"\n"
-" * \"Fatto\": quando avrete finito il partizionamento del disco cliccate su\n"
-"questa opzione, le vostre modifiche verranno salvate sul disco.\n"
-"\n"
-"Si noti che è possibile raggiungere ogni opzione usando la tastiera. Per\n"
-"spostarvi fra le partizioni usate i tasti [Tab] e le frecce [Sù/Giù].\n"
-"\n"
-"Dopo aver selezionato una partizione potete usare:\n"
-"\n"
-" * Ctrl-c per creare una nuova partizione (se avete selezionato una\n"
-"partizione vuota);\n"
-"\n"
-" * Ctrl-d per cancellare una partizione;\n"
-"\n"
-" * Ctrl-m per impostare il punto di mount.\n"
-"\n"
-"Per ottenere informazioni in merito ai diversi tipi di filesystem\n"
-"disponibili, consultate il capitolo ext2fs del ''Reference Manual''.\n"
-"\n"
-"Se state effettuando l'installazione su una macchina PPC, sarà necessario\n"
-"creare una piccola partizione HFS di almeno 11MB, che verrà utilizzata dal\n"
-"bootloader yaboot. Se decidete di creare una partizione più grande, diciamo\n"
-"sui 50MB, potrebbe rappresentare un utile deposito dove conservare un\n"
-"kernel di riserva e immagini di ''ramdisk'' da utilizzare in caso di\n"
-"emergenza."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sul vostro disco rigido è stata individuata più di una partizione\n"
-"MicrosoftWindows. Per favore, scegliete quella che deve essere\n"
-"ridimensionata in modo da poter installare il vostro nuovo sistema\n"
-"operativo Mandrake Linux.\n"
-"\n"
-"Ogni partizione viene elencata come segue: \"nome Linux\", \"nome Windows\"\n"
-"\"Capacità\".\n"
-"\n"
-"Il \"nome Linux\" è strutturato in: \"tipo di disco rigido\", \"numero del\n"
-"disco\", \"numero della partizione\" (ad esempio, \"hda1\").\n"
-"\n"
-"Il \"tipo di disco rigido\" è \"hd\" se il vostro disco è di tipo IDE, e\n"
-"\"sd\" se, invece, è un disco SCSI.\n"
-"\n"
-"Il \"numero del disco\" è sempre una lettera che segue \"hd\" o \"sd\". Per\n"
-"i dischi IDE:\n"
-"\n"
-" * \"a\" significa \"disco rigido master sul controller IDE primario\",\n"
-"\n"
-" * \"b\" means \"disco rigido slave sul controller IDE primario\";\n"
-"\n"
-" * \"c\" means \"disco rigido master sul controller IDE secondario\";\n"
-"\n"
-" * \"d\" means \"disco rigido slave sul controller IDE secondario\".\n"
-"\n"
-"Per i dischi rigidi di tipo SCSI, invece, una \"a\" significa \"ID SCSI\n"
-"più\", una \"b\" significa \"ID SCSI superiore ad a\", etc.\n"
-"\n"
-"Il \"nome Windows\" è la lettera che corrisponde al vostro disco rigido\n"
-"sotto Windows (il primo disco o partizione è chiamato \"C:\")."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Per favore siate pazienti. Questa operazione può richiedere diversi minuti."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"A questo punto DrakX deve sapere se intendete effettuare un'installazione\n"
-"in modalità predefinita (\"Raccomandata\") o se preferite avere un maggior\n"
-"controllo su di essa (\"Esperto\"). Inoltre potete scegliere se effettuare\n"
-"una nuova installazione o un aggiornamento di un sistema Mandrake Linux\n"
-"esistente:\n"
-"\n"
-" * \"Installazione\" Cancella completamente il vecchio sistema. A seconda "
-"di\n"
-"come è strutturato il sistema preesistente potrete mantenere inalterate\n"
-"alcune delle vecchie partizioni (Linux e altre).\n"
-"\n"
-" * \"Aggiornamento\" Questo tipo di installazione vi permette di effettuare\n"
-"un semplice aggiornamento dei pacchetti installati sul vostro sistema\n"
-"Mandrake Linux. Conserva tutte le partizioni attuali del disco rigido, come\n"
-"pure le configurazioni individuali degli utenti. Tutti gli altri passi\n"
-"relativi alla configurazione verranno effettuati come per una installazione\n"
-"da zero.\n"
-"\n"
-" * \"Solo aggiornamento pacchetti\" Questa nuovissima opzione vi permette "
-"di\n"
-"aggiornare un sistema Mandrake Linux esistente lasciando intatta la\n"
-"configurazione globale del sistema. è anche possibile aggiungere nuovi\n"
-"pacchetti all'installazione corrente.\n"
-"\n"
-"Gli aggiornamenti dovrebbe svolgersi senza difficoltà per sistemi Mandrake\n"
-"Linux a partire dalla versione \"8.1\".\n"
-"\n"
-"Scegliete una delle seguenti modalità di installazione, in base alla vostra\n"
-"conoscenza di GNU/Linux:\n"
-"\n"
-" * Raccomandata: se non avete mai installato il sistema operativo GNU/"
-"Linux,\n"
-"scegliete questa modalità. L'installazione sarà molto semplice e vi\n"
-"verranno poste solo poche domande;\n"
-"\n"
-" * Esperto: se avete abbastanza familiarità con GNU/Linux potete scegliere\n"
-"questa modalità, che vi permetterà di effettuare un'installazione altamente\n"
-"personalizzata. Rispondere ad alcune delle domande che vi verranno poste\n"
-"potrebbe essere difficile se non avete una buona conoscenza di GNU/Linux,\n"
-"pertanto non fate questa scelta se non sapete bene quello che state\n"
-"facendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente DrakX provvede a individuare automaticamente la tastiera\n"
-"corretta (in base alla lingua che avete scelto) e voi non vedrete nemmeno\n"
-"questo passo. Tuttavia, potreste avere una tastiera che non corrisponde\n"
-"esattamente alla vostra lingua: se siete un francese che parla italiano, ad\n"
-"esempio, potreste comunque preferire una tastiera francese. Oppure, se\n"
-"parlate italiano ma vivete nel Québec, potreste trovarvi nella stessa\n"
-"situazione. In entrambi i casi, dovrete tornare a questa fase\n"
-"dell'installazione e selezionare una tastiera appropriata dalla lista.\n"
-"\n"
-"Cliccate sul pulsante \"Avanzato\" per vedere una lista completa delle\n"
-"tastiere supportate."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Scegliete la lingua che intendete usare per l'installazione e l'uso del\n"
-"sistema.\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" potrete scegliere altre lingue da\n"
-"installare sul vostro computer. La selezione di altre lingue comporta\n"
-"l'installazione dei file relativi alla documentazione e alle applicazioni\n"
-"per ciascuna di esse. Se il vostro computer dovrà essere usato, ad esempio,\n"
-"anche da persone di madre lingua spagnola, potete scegliere l'italiano come\n"
-"lingua principale nella struttura ad albero e, nella sezione \"Avanzato\",\n"
-"apporre un segno di spunta sul pulsante grigio corrispondente a\n"
-"\"Spanish|Spain\".\n"
-"\n"
-"È possibile installare i file per più lingue allo stesso tempo. Dopo aver\n"
-"scelto quelle che preferite cliccate sul pulsante \"Ok\" per continuare."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"In genere DrakX individua automaticamente il numero di pulsanti presente\n"
-"sul vostro mouse, in caso contrario conclude che il vostro mouse è un mouse\n"
-"a due tasti e lo imposta in modo da emulare il terzo tasto. DrakX, inoltre,\n"
-"riconosce automaticamente se si tratta di un mouse PS/2, seriale o USB.\n"
-"\n"
-"Se volete specificare un diverso tipo di mouse, scegliete il vostro modello\n"
-"dall'elenco che vi viene proposto.\n"
-"\n"
-"Se scegliete un mouse diverso dal tipo predefinito, vi verrà mostrata una\n"
-"finestra dove potrete provarlo. Provate sia i pulsanti che l'eventuale\n"
-"rotellina per controllare che la configurazione sia corretta. Se il mouse\n"
-"non funziona correttamente, premete la barra spaziatrice o il tasto [Invio]\n"
-"per premere il pulsante \"Annulla\" ed effettuare una nuova scelta."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Scegliete la porta appropriata. La porta \"COM1\" sotto Windows, ad\n"
-"esempio, è chiamata \"ttyS0\" sotto GNU/Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Questo è il punto più critico per la sicurezza del vostro sistema\n"
-"GNU/Linux: state per decidere la password di \"root\". \"root\" è\n"
-"l'amministratore del sistema, ed è l'unico utente autorizzato a compiere\n"
-"aggiornamenti, aggiungere altri utenti, cambiare la configurazione globale\n"
-"del sistema, etc. In breve, può fare tutto ciò che vuole! Questo è il\n"
-"motivo per cui dovete scegliere una password che sia difficile da\n"
-"indovinare: DrakX vi dirà se è troppo facile. Potete anche scegliere di non\n"
-"digitare una password, ma noi vi consigliamo caldamente di farlo, almeno\n"
-"per un motivo: non pensate che, avviando il sistema con GNU/Linux, gli\n"
-"altri sistemi operativi che convivono con esso sulla stessa macchina siano\n"
-"al sicuro da errori; al contrario: \"root\" può scavalcare ogni limitazione\n"
-"e (magari involontariamente) cancellare tutti i dati presenti sulle\n"
-"partizioni accedendo in maniera scorretta a queste ultime! Quindi è molto\n"
-"importante che sia difficile per gli utenti normali diventare \"root\".\n"
-"\n"
-"La password ideale è costituita da un insieme di caratteri alfanumerici\n"
-"lungo almeno 8 caratteri. Non scrivete mai su qualche appunto la password\n"
-"di \"root\", renderebbe troppo facile l'accesso al sistema da parte di\n"
-"estranei.\n"
-"\n"
-"Prestate attenzione, tuttavia, a non scegliere una password troppo lunga o\n"
-"complicata, perché dovete essere in grado di ricordarla senza troppo\n"
-"sforzo.\n"
-"\n"
-"La password non verrà mostrata mentre la digitate. Per questo motivo è\n"
-"necessario che venga inserita due volte, per ridurre il rischio di un\n"
-"errore di battitura. Se per caso commettete lo stesso errore due volte,\n"
-"questa password \"scorretta\" sarà quella che verrà richiesta la prima\n"
-"volta che vi connetterete al sistema.\n"
-"\n"
-"In modalità Esperto vi verrà chiesto se il vostro computer è connesso a un\n"
-"server di autenticazione, secondo il protocollo NIS o LDAP.\n"
-"\n"
-"Se la vostra rete si basa sul protocollo LDAP (o NIS) per l'autenticazione,\n"
-"selezionate il pulsante \"LDAP\" (o \"NIS\") per effettuare\n"
-"l'autenticazione. Se non siete sicuri, chiedete al vostro amministratore di\n"
-"rete.\n"
-"\n"
-"Se il vostro computer non è connesso a una rete soggetta ad autenticazione,\n"
-"scegliete \"File locali\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO e grub sono due ''bootloader'' di GNU/Linux. Un bootloader è un\n"
-"programma per l'avvio di uno o più sistemi operativi. Questa fase, in\n"
-"genere, è del tutto automatica; DrakX, infatti, analizza il settore di boot\n"
-"del disco, e si comporta in base a quello che vi trova:\n"
-"\n"
-" * se trova un settore di boot di Windows, lo rimpiazza con un settore di\n"
-"boot di grub o LILO, in modo da permettervi di lanciare GNU/Linux o un\n"
-"altro OS;\n"
-"\n"
-" * se trova un settore di boot di grub o LILO, lo sostituisce con uno "
-"nuovo.\n"
-"\n"
-"In caso di dubbio, DrakX mostrerà una finestra di dialogo con varie\n"
-"opzioni:\n"
-"\n"
-" * \"Bootloader da usare\": avete tre scelte a disposizione:\n"
-"\n"
-"    * \"GRUB\": se preferite grub (menu in modo testo);\n"
-"\n"
-"    * \"LILO con menu grafico\": se preferite LILO con la sua interfaccia\n"
-"grafica;\n"
-"\n"
-"    * \"LILO con menu in modo testo\": se preferite LILO nella sua versione "
-"con\n"
-"menu in modo testo.\n"
-"\n"
-" * \"Dispositivo di boot\": nella maggior parte dei casi non sarà "
-"necessario\n"
-"cambiare le impostazioni predefinite (\"/dev/hda\"), ma, se lo preferite,\n"
-"il bootloader può essere installato sul secondo disco rigido\n"
-"(\"/dev/hdb\"), o persino su un floppy (\"/dev/fd0\");\n"
-"\n"
-" * \"Ritardo prima di avviare con l'immagine predefinita\": è il tempo\n"
-"lasciato all'utente per scegliere una voce diversa da quella predefinita\n"
-"nel menu del bootloader.\n"
-"\n"
-"!! Prestate particolare attenzione al fatto che, se scegliete di non\n"
-"installare un bootloader (scegliendo \"Annulla\" nella finestra di cui\n"
-"sopra), dovete essere sicuri di poter avviare il vostro sistema Mandrake\n"
-"Linux in altro modo! Accertatevi anche di sapere quello che fate se\n"
-"modificate qualcuna delle opzioni. !!\n"
-"\n"
-"Cliccando sul pulsante \"Avanzato\" di questa finestra avrete la\n"
-"possibilità di scegliere tra molte opzioni avanzate, riservate agli utenti\n"
-"esperti.\n"
-"\n"
-"Dopo aver configurato i parametri generali del bootloader, verrà mostra la\n"
-"lista delle opzioni disponibili al momento del boot.\n"
-"\n"
-"Se sulla vostra macchina è già installato un altro sistema operativo,\n"
-"quest'ultimo verrà automaticamente aggiunto al menu di avvio. Potete anche\n"
-"scegliere di configurare con precisione le opzioni esistenti: selezionate\n"
-"una voce e cliccate su \"Modifica\" per modificarne i parametri o\n"
-"rimuoverla; \"Aggiungi\" crea una nuova voce, mentre cliccando su \"Fatto\"\n"
-"passerete alla fase di installazione successiva."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (il LInux LOader) e GRUB sono bootloader: sono in grado di caricare\n"
-"indifferentemente GNU/Linux o altri sistemi operativi presenti sul vostro\n"
-"computer. Normalmente, questi sistemi operativi sono correttamente rilevati\n"
-"e installati. Se non avviene, potete aggiungere una voce a mano in questo\n"
-"schermo. State attenti a scegliere i parametri corretti.\n"
-"\n"
-"Potreste anche non voler dare l'accesso a questi sistemi operativi a\n"
-"chiunque, nel qual caso potete cancellare le voci corrispondenti, ma in\n"
-"questo caso avrete bisogno di un boot disk per caricarli!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Dovete adesso indicare dove volete che vengano collocate le informazioni\n"
-"necessarie per effettuare il boot con GNU/Linux.\n"
-"\n"
-"A meno che non sappiate esattamente quello che state facendo, scegliete\n"
-"\"Primo settore del disco rigido (MBR)\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Qui potrete scegliere il sistema di stampa da usare con questo computer.\n"
-"Altri sistemi operativi possono offrirvene uno, ma Mandrake Linux ve ne\n"
-"offre ben tre.\n"
-"\n"
-" * \"pdq\" che sta per ''print, don't queue'' (''stampa, non mettere in\n"
-"coda''), è una buona scelta se avete una connessione diretta con la\n"
-"stampante e volete essere in grado di risolvere rapidamente eventuali\n"
-"inceppamenti della carta, e inoltre non avete altre stampanti connesse via\n"
-"rete. Infatti può gestire solo connessioni di rete molto semplici ed è\n"
-"comunque piuttosto lento in quest'ultimo caso. Scegliete \"pdq\" se questa\n"
-"è la vostra prima volta con GNU/Linux. Potrete cambiare la vostra scelta\n"
-"dopo aver terminato l'installazione lanciando PrinterDrake dal Centro di\n"
-"controllo Mandrake e cliccando sul pulsante Esperto.\n"
-"\n"
-" * \"CUPS\"''Common Unix Printing System'' (''Sistema di stampa unificato\n"
-"per Unix''), offre risultati eccellenti sia che dobbiate stampare sulla\n"
-"vostra stampante locale, sia nel caso che la stampa debba essere effettuata\n"
-"sull'altra faccia del pianeta. È semplice da usare e può agire come server\n"
-"o client per il vecchio sistema di stampa \"lpd\". Infatti è compatibile\n"
-"con i sistemi precedenti. Ha molte frecce al suo arco, ma la configurazione\n"
-"basica è quasi altrettanto semplice di quella per \"pdq\". Se avete bisogno\n"
-"di emulare un server \"lpd\" dovete attivare il demone \"cups-lpd\".\n"
-"Dispone di interfaccia grafica per la stampa e per la configurazione delle\n"
-"opzioni della stampante.\n"
-"\n"
-" * \"lprNG\"''line printer daemon New Generation'' (''demone di stampa di\n"
-"nuova generazione''. Questo sistema è approssimativamente equivalente agli\n"
-"altri, ma è anche in grado di stampare su dispositivi collegati per mezzo\n"
-"di una rete Novell, dato che supporta il protocollo IPX, e può stampare\n"
-"direttamente in base a comandi via shell. Se avete bisogno di una\n"
-"connessione di tipo Novell, o di stampare senza fare uso di pipe,\n"
-"utilizzate lprNG. In caso contrario, è preferibile usare CUPS dato che è\n"
-"più semplice e migliore nel gestire stampanti di rete."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Ora DrakX procederà con il rilevamento di tutti i dischi rigidi e altri\n"
-"dispositivi IDE presenti sul vostro computer, e cercherà anche di stabilire\n"
-"se sul vostro sistema sono presenti una o più schede SCSI di tipo PCI. Se\n"
-"verrà individuato un dispositivo di questo tipo, DrakX installerà\n"
-"automaticamente il driver appropriato.\n"
-"\n"
-"Dato che il riconoscimento automatico in alcuni casi potrebbe non riuscire\n"
-"a individuare una particolare periferica, vi verrà comunque chiesto se\n"
-"avete una scheda SCSI PCI diversa da quelle eventualmente identificate\n"
-"oppure no. Scegliete \"Sì\" se siete sicuri che nel vostro computer è\n"
-"presente un'altra scheda SCSI: potrete scegliere la vostra scheda da una\n"
-"lista. Scegliete \"No\" se non disponete di nessun tipo di hardware SCSI, o\n"
-"se siete soddisfatti del riconoscimento automatico. Se non siete sicuri,\n"
-"potete anche controllare la lista dell'hardware rilevato nella vostra\n"
-"macchina selezionando \"Vedi informazioni hardware\" e cliccando su \"Ok\".\n"
-"Controllate l'elenco dell'hardware individuato e poi cliccate sul pulsante\n"
-"\"Ok\" per ritornare alla domanda relativa alla scheda SCSI.\n"
-"\n"
-"Se sarete costretti a specificare manualmente il tipo di scheda in vostro\n"
-"possesso, DrakX vi chiederà se intendete indicare delle opzioni da usare\n"
-"con essa. Vi consigliamo di permettere a DrakX di esaminare l'hardware per\n"
-"stabilire le particolari opzioni della scheda che dovranno essere usate\n"
-"all'inizializzazione; questo metodo in genere permette di ottenere buoni\n"
-"risultati.\n"
-"\n"
-"Se DrakX non riesce a stabilire quali sono le opzioni da passare alla\n"
-"scheda, dovrete specificarle manualmente. Consultate il ''Manuale\n"
-"dell'utente'' (capitolo 3, paragrafo \"Ricerca di informazioni sul vostro\n"
-"hardware\") per qualche suggerimento su come ottenerle dalla documentazione\n"
-"dell'hardware, dal sito web del produttore (se disponete di un accesso a\n"
-"Internet) o da MicrosoftWindows (se avete utilizzato la stessa scheda con\n"
-"Windows sul vostro stesso sistema)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot è un bootloader per hardware NewWorld MacIntosh. È in grado di\n"
-"avviare GNU/Linux, MacOS, o MacOSX, se presenti sul vostro computer.\n"
-"Normalmente gli altri sistemi operativi sono identificati e installati\n"
-"correttamente. Se così non fosse, potete aggiungere manualmente una voce\n"
-"in questa schermata. Accertatevi di scegliere i parametri corretti.\n"
-"\n"
-"\n"
-"Le opzioni principali di Yaboot sono:\n"
-"\n"
-"\n"
-"  - Init Message: un semplice messaggio di testo che viene mostrato prima\n"
-"del prompt di boot.\n"
-"\n"
-"\n"
-"  - Boot Device: specificate dove si trovano le informazioni richieste per \n"
-"avviare GNU/Linux. In genere è necessario prima impostare una partizione "
-"di \n"
-"bootstrap che contenga queste informazioni.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: a differenza di LILO, sono possibili due pause \n"
-"diverse. La prima si misura in secondi, e a questo punto potete scegliere \n"
-"CD, OF boot, MacOS, o Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: questa pausa è simile all'attesa di LILO.  Dopo \n"
-"aver selezionato Linux, avrai a disposizione un'attesa misurata in decimi "
-"di\n"
-"secondo prima che venga selezionata la descrizione del kernel predefinita.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: selezionando questa opzione potrai scegliere 'C' per CD "
-"al\n"
-"primo avvio del sistema.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: selezionando questa opzione potrai scegliere 'N' per "
-"Open\n"
-"Firmware al primo avvio del sistema.\n"
-"\n"
-"\n"
-"  - Default OS: puoi scegliere qual è il SO predefinito da avviare quando "
-"termina \n"
-"la pausa dell'Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Qui sono riportati vari parametri relativi al vostro sistema. In base\n"
-"all'hardware installato, potrebbero essere visualizzate le seguenti voci:\n"
-"\n"
-" * \"Mouse\": controllate la configurazione attuale del mouse, e cliccate\n"
-"sul pulsante per cambiarla, se necessario;\n"
-"\n"
-" * \"Tastiera\": controllate l'attuale impostazione della tastiera, e\n"
-"cliccate sul pulsante per cambiarla, se necessario;\n"
-"\n"
-" * \"Fuso orario\": DrakX, come opzione predefinita, deduce il vostro fuso\n"
-"orario dalla lingua che avete scelto. Ma anche in questo caso, come per la\n"
-"scelta della tastiera, potreste non trovarvi nella nazione cui corrisponde\n"
-"la lingua che avete scelto; in tal caso sarà necessario cliccare su questo\n"
-"pulsante per poter configurare il fuso orario in base a quello dell'area\n"
-"geografica in cui vivete;\n"
-"\n"
-" * \"Stampante\": cliccando sul pulsante \"Nessuna stampante\" si "
-"richiamerà\n"
-"l'assistente di configurazione della stampante;\n"
-"\n"
-" * \"Scheda audio\": se sul vostro sistema è stata individuata una scheda\n"
-"audio, verrà mostrata qui. Al momento dell'installazione non è possibile\n"
-"apportare alcuna modifica;\n"
-"\n"
-" * \"Scheda TV\": se sul vostro sistema è stata individuata una scheda TV,\n"
-"verrà mostrata qui. Al momento dell'installazione non è possibile apportare\n"
-"alcuna modifica;\n"
-"\n"
-" * \"Scheda ISDN\": se sul vostro sistema è stata individuata una scheda\n"
-"ISDN, verrà mostrata qui. Potete cliccare sul pulsante relativo per\n"
-"cambiarne i parametri."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Scegliete il disco rigido che volete cancellare per poter installare la\n"
-"nuova partizione per Mandrake Linux. Attenzione! tutti i dati presenti\n"
-"andranno perduti e non saranno più recuperabili!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/it/drakx-help.xml
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliccate sul pulsante \"OK\" se volete tutte le partizioni e i dati\n"
-"presenti su questo disco rigido. Prestate attenzione, dopo aver cliccato su\n"
-"\"OK\" non potrete più recuperare le partizioni e i dati presenti sul\n"
-"disco, compresi eventuali dati di Windows.\n"
-"\n"
-"Cliccate su \"Annulla\" per annullare questa operazione senza che vengano\n"
-"persi dati o partizioni presenti su questo disco rigido."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Non riesco ad accedere ai moduli del kernel corrispondenti al vostro kernel "
-"(il file %s è assente), questo in genere significa che il vostro dischetto "
-"di boot non è aggiornato rispetto al supporto di installazione. Per favore "
-"create un dischetto di boot aggiornato."
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Dovete formattare anche %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Hai selezionato i seguenti server: %s\n"
-"\n"
-"\n"
-"Questi server verranno attivati automaticamente. Non presenta problemi di\n"
-"sicurezza conosciuti, ma potrebbero esserne scoperti di nuovi. In tal caso,\n"
-" accertati di effettuare un aggiornamento non appena possibile.\n"
-"\n"
-"\n"
-"Vuoi davvero installare questi server?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Non posso usare broadcast senza un dominio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserisci un floppy MS-DOS nel drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Questo floppy non è stato formattato usando MS DOS/Windows"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per usare la selezione di pacchetti che avete salvato, dovete cominciare "
-"l'installazione digitando ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Errore leggendo il file %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Parte dell'hardware del tuo computer richiede drivers ''proprietari'' per\n"
-"funzionare. Puoi trovare informazioni al riguardo presso: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Devi avere una partizione radice.\n"
-"A questo scopo, crea una partizione (o clicca su una già esistente).\n"
-"Quindi clicca su \"Punto di mount\" e assegna '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Devi avere una partizione di swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Non hai una partizione di swap\n"
-"\n"
-"Continuo comunque?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Devi avere una partizione FAT montata su /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usa lo spazio libero"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Non c'è abbastanza spazio libero per allocare nuove partizioni"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usa partizione esistente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Non c'è una partizione esistente da usare"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usa la partizione Windows per loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Che partizione vuoi usare per Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Scegli le dimensioni"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Dimensione partizione radice in Mb: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Dimensione partizione di swap in Mb: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usa lo spazio libero della partizione Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Quale partizione vuoi ridimensionare?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calcolo i confini del filesystem di Windows "
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Il ridimensionatore della FAT non riesce a gestire la tua partizione, \n"
-"si è verificato il seguente errore: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"La tua partizione Windows è troppo frammentata, per favore prima\n"
-"lancia ''defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATTENZIONE!\n"
-"\n"
-"DrakX ora ridimensionerà la tua partizione Windows. Stai attento: questa\n"
-"operazione è pericolosa. Se non lo hai già fatto, dovresti prima uscire\n"
-"dall'installazione, lanciare scandisk sotto Windows (e opzionalmente "
-"defrag),\n"
-"e poi riavviare l'installazione. Dovresti anche fare il backup dei tuoi "
-"dati.\n"
-"Quando sei sicuro, premi Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto spazio vuoi lasciare per Windows sulla"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partizione %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ridimensionamento FAT fallito: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Non c'è una partizione FAT da ridimensionare o da usare come loopback (o \n"
-"non c'è abbastanza spazio su di essa)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Cancella l'intero disco"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Rimuovi Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Hai più di un disco rigido, su quale vuoi installare linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TUTTE le partizioni esistenti e i loro dati verranno persi sul disco %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partizionamento personalizzato del disco"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usa fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Adesso puoi partizionare %s\n"
-"Quando hai finito, non dimenticare di salvare usando 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Non hai sufficiente spazio libero sulla partizione Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Non trovo lo spazio per installare Mandrake Linux"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"Il wizard di partizionamento di DrakX ha trovato le seguenti soluzioni:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizionamento fallito: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Sto attivando la rete"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Sto disattivando la rete"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"C'è stato un errore, ma non so come gestirlo correttamente.\n"
-"Continua a tuo rischio e pericolo."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto di mount doppio: %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alcuni pacchetti importanti non sono stati installati correttamente.\n"
-"O il lettore di cdrom o il tuo cdrom sono danneggiati.\n"
-"Controlla il cdrom su un sistema già installato digitando \"rpm -qpl "
-"mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvenuto a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nessun drive floppy disponibile"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Inizio fase '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Il tuo sistema ha poche risorse. Potresti avere problemi installando\n"
-"Mandrake Linux. In tal caso, in alternativa puoi provare un'installazione \n"
-"testuale. Per questo, premi 'F1' all'avvio da CDROM, poi digita 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe d'installazione"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Per favore, scegli una delle seguenti classi d'installazione:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La dimensione totale dei gruppi da te scelti è approssimativamente %d Mb.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se desideri installare occupando una quantità di spazio minore,\n"
-"scegli la percentuale dei pacchetti che vuoi installare.\n"
-"\n"
-"Una bassa percentuale installerà solo i pacchetti più importanti;\n"
-"una percentuale del 100%% installerà tutti i pacchetti scelti."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Hai spazio sul tuo disco rigido solo per %d%% di questi pacchetti.\n"
-"\n"
-"Scegli una percentuale dei pacchetti che vuoi installare.\n"
-"Una bassa percentuale installerà solo i pacchetti più importanti;\n"
-"una percentuale del %d%% installerà tutti i pacchetti possibili."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Potrai scegliere più specificatamente nella prossima fase."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentuale dei pacchetti da installare"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selezione Gruppi di Pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selezione individuale pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Domensione totale: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pacchetto errato"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versione: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Dimensioni: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importanza: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Non puoi selezionare questo pacchetto perchè non c'è abbastanza spazio \n"
-"rimanente per installarlo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "I seguenti pacchetti stanno per essere installati"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "I seguenti pacchetti satanno per essere rimossi"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Non puoi selezionare/deselezionare questo pacchetto"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Questo è un pacchetto obbligatorio, non può essere deselezionato"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Non puoi deselezionare questo pacchetto. è già installato"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Questo pacchetto deve essere aggiornato\n"
-"Sei sicuro di volerlo deselezionare?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Non puoi deselezionare questo pacchetto. Deve essere aggiornato"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostra i pacchetti selezionati automaticamente"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installa"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Carica/Salva su floppy"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Aggiornamento scelta pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Installazione minima"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Scegli i pacchetti da installare"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installazione"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Sto valutando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Per favore attendi, sto preparando l'installazione"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacchetti"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installazione del pacchetto %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accetta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rifiuta"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Sostituisci il Cd-Rom!\n"
-"\n"
-"Per favore inserisci il Cd-Rom chiamato \"%s\" nel tuo lettore e premi Ok "
-"quando\n"
-"pronto. Se non ce l'hai, premi Annulla per evitare l'installazione da questo "
-"Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Vado avanti comunque?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "C'è stato un errore ordinando i pacchetti:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "C'è stato un errore installando i pacchetti:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Attenzione\n"
-"\n"
-"Per favore leggete con attenzione il documento che segue.\n"
-"Se non siete d'accordo con una qualsiasi parte, non potete installare il CD\n"
-"successivo. Premete 'Rifiuta' per continuare l'installazione senza di esso.\n"
-"\n"
-"\n"
-"Alcune componenti software contenute nel CD successivo non sono\n"
-"soggette alla licenza GPL o a licenze simili. Ciascuna di tali componenti\n"
-"è pertanto soggetta ai termini e alle condizioni della propria\n"
-"licenza specifica. Per favore leggete con attenzione e attenetevi a tali\n"
-"licenze specifiche prima di usare o redistribuire tali\n"
-"componenti software. Tali licenze in genere proibiscono\n"
-"il trasferimento, la duplicazione (eccetto che per scopi di backup),\n"
-"la redistribuzione, il reverse engineering, il deassemblaggio,\n"
-"la decompilazione o la modifica della componente in questione.\n"
-"Qualunque infrazione del contratto porterà alla immediata cancellazione dei "
-"vostri\n"
-"diritti per quanto riguarda la specifica licenza.\n"
-"A meno che la licenza specifica non vi accordi tali diritti,\n"
-"in genere non potete installare i programmi su più di un computer, o "
-"adattarlo in\n"
-"modo che possa essere usato su una rete. In caso di\n"
-"dubbio, per favore contattate direttamente il distributore\n"
-"o il curatore della componente. Il trasferimento a terzi o la copia di tali\n"
-"componenti, documentazione inclusa, è in genere proibito.\n"
-"\n"
-"\n"
-"Tutti i diritti relativi alle componenti del CD successivo appartengono ai\n"
-"loro rispettivi autori e sono protetti dalle leggi relative alla proprietà "
-"intellettuale\n"
-"e al copyright applicabili ai programmi software.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Si è verificato un errore"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Vuoi davvero abbandonare l'installazione?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Accordo di licenza"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduzione\n"
-"\n"
-"Nel seguito intendiamo con \"Software\" il sistema operativo e le diverse "
-"componenti disponibili\n"
-"nella distribuzione Mandrake Linux. Il Software include, ma non è limitato "
-"a, l'insieme di\n"
-"programmi, metodi, regole e documentazione relativi al sistema operativo e "
-"alle diverse componenti\n"
-"della distribuzione Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licenza\n"
-"\n"
-"Per favore leggete con attenzione questo documento.\n"
-"Questo documento costituisce un contratto fra voi e la MandrakeSoft S.A. per "
-"quanto riguarda l'uso del Software. L'azione di installare, duplicare o "
-"usare in qualsiasi modo il Software implica l'esplicita accettazione e il "
-"pieno consenso ad adeguarsi ai termini e alle condizioni di questa Licenza. "
-"Se non siete d'accordo con uno o più punti della Licenza, non avete "
-"l'autorizzazione a installare, duplicare o utilizzare il Software. Qualunque "
-"tentativo di installare, duplicare o utilizzare il Software in modi non "
-"conformi ai termini e alle condizioni della Licenza porterà automaticamente "
-"all'annullamento della licenza e alla revoca dei vostri diritti ai sensi "
-"della stessa. Una volta invalidata la Licenza, avete l'obbligo di "
-"distruggere immediatamente tutte le copie del Software in vostro possesso.\n"
-"\n"
-"\n"
-"2. Garanzia e limiti della garanzia\n"
-"\n"
-"Il Software e la documentazione allegata sono forniti \"come sono\", senza "
-"nessuna garanzia, nei limiti permessi dalla legge. In nessun caso, e nei "
-"limiti permessi dalla legge, la MandrakeSoft S.A. potrà essere ritenuta "
-"responsabile per un qualsiasi danno, speciale, accidentale, diretto o "
-"indiretto (inclusi, senza limitazioni, danni dovuti alla perdita di attività "
-"commerciali, interruzioni dell'attività commerciale, perdite finanziarie, "
-"oneri legali e sanzioni pecuniarie che derivino da sentenze giudiziarie, o "
-"qualsiasi altra perdita conseguente), dovuto all'utilizzo o "
-"all'impossibilità di utilizzo del Software, anche nel caso in cui "
-"MandrakeSoft S.A. sia stata avvertita della possibilità che si verificassero "
-"tali danni.\n"
-"\n"
-"RESPONSABILITÀ LIMITATA IN RELAZIONE AL POSSESSO O ALL'USO DI SOFTWARE "
-"PROIBITO IN ALCUNE NAZIONI\n"
-"\n"
-"Nei limiti di legge, in nessun caso MandrakeSoft S.A. o i suoi distributori "
-"potranno essere ritenuti responsabili per un qualsiasi danno, speciale, "
-"accidentale, diretto o indiretto (inclusi, senza limitazioni, danni dovuti "
-"alla perdita di attività commerciali, interruzioni dell'attività "
-"commerciale, perdite finanziarie, oneri legali e sanzioni pecuniarie che "
-"derivino da sentenze giudiziarie, o qualsiasi altra perdita conseguente), "
-"dovuto al possesso e all'uso di componenti software, o derivante dall'aver "
-"scaricato componenti software da uno dei siti di Mandrake Linux, che "
-"risultino proibiti o soggetti a limitazioni d'uso in alcune nazioni per "
-"effetto di leggi locali. Questa limitazione di responsabilità si applica, ma "
-"non è limitata, alle componenti di crittografia sicura incluse nel "
-"Software.\n"
-"\n"
-"\n"
-"3. La Licenza GPL (\"General Public License\") e altre Licenze collegate\n"
-"\n"
-"Il Software è costituito da componenti create da persone ed enti diversi. La "
-"maggior parte di queste componenti sono soggette ai termini e alle "
-"condizioni della GNU General Public License, d'ora in poi chiamata \"GPL\", "
-"o di licenze simili. La maggior parte di queste licenze vi consente di "
-"usare, duplicare, adattare o redistribuire le componenti software che le "
-"adottano. Per favore leggete con attenzione i termini e le condizioni della "
-"licenza relativa a ciascuna componente prima di utilizzarla. Qualsiasi "
-"domanda relativa alla licenza di una componente software dovrebbe essere "
-"indirizzata all'autore di tale componente, e non alla MandrakeSoft. I "
-"programmi sviluppati dalla MandrakeSoft S.A. sono soggetti alla licenza GPL."
-"La documentazione scritta dalla MandrakeSoft S.A. è soggetta a una licenza "
-"specifica. Per favore consultate la documentazione per ulteriori dettagli.\n"
-"\n"
-"\n"
-"4. Diritti di proprietà intellettuale\n"
-"\n"
-"Tutti i diritti relativi alle componenti del Software appartengono ai "
-"rispettivi autori e sono protetti dalle leggi che disciplinano la proprietà "
-"intellettuale e il copyright applicabili ai programmi software.La "
-"MandrakeSoft S.A. si riserva il diritto di modificare o adattare il "
-"Software, in parte o in tutto, con ogni mezzo e per qualsiasi scopo."
-"\"Mandrake\", \"Mandrake Linux\" e i relativi logo sono proprietà della "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Disposizioni diverse\n"
-"\n"
-"Se una qualsiasi parte di questo contratto è ritenuta non valida, illegale o "
-"non applicabile in seguito a sentenza giudiziaria in una determinata "
-"giurisdizione, tale parte è esclusa dal contratto. Rimangono vincolanti le "
-"altre parti applicabili del contratto.I termini e le condizioni di questa "
-"Licenza sono soggetti alle leggi vigenti in Francia.Qualsiasi disputa in "
-"merito ai termini di questa licenza verrà risolta preferibilmente per via "
-"extra-giudiziaria. Come ultima risorsa, la disputa verrà portata "
-"all'attenzione del Tribunale competente di Parigi - Francia.Per qualsiasi "
-"domanda riguardo questo documento, per favore contattate MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastiera"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Per favore, scegli la mappa della tastiera."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ecco la lista completa delle tastiere disponibili"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Che classe di installazione preferisci?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installa/Aggiorna"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "È un'installazione o un aggiornamento?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Raccomandata"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Esperto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aggiorna"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Solo aggiornamento pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Per favore, scegli il tipo del tuo mouse."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porta del mouse"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Per favore scegli a che porta seriale è connesso il mouse."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulazione pulsanti"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulazione pulsante 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulazione pulsante 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuro schede PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Sto configurando IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nessuna partizione disponibile"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Controllo delle partizioni per trovare i punti di mount"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Scegli i punti di mount"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Non posso leggere la tua tabella delle partizioni, è troppo corrotta \n"
-"per me :( . Posso provare a continuare a svuotare le partizioni danneggiate\n"
-"(TUTTI I DATI verranno persi!). L'altra soluzione è di impedire a DrakX di\n"
-"modificare la tabella delle partizioni. (L'errore è %s)\n"
-"\n"
-"Ti va bene liberare tutte le partizioni?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Diskdrake ha fallito la lettura della tabella delle partizioni.\n"
-"Continua a tuo rischio e pericolo!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Non c'è spazio libero per un bootstrap di 1MB! L'installazione continua, ma "
-"per avviare il sistema dovrai creare la partizione di bootstrap con DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Non ho trovato una partizione root da aggiornare"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partizione radice"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual'è la partizione radice (/) del tuo sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Devi resettare affinché le modifiche alla tabella delle partizioni\n"
-"abbiano effetto"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Scegli le partizioni che vuoi formattare"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Controllo blocchi danneggiati?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formattazione partizioni"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Sto creando e formattando il file %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Swap insufficiente per completare l'installazione. Per favore, aumentane le "
-"dimensioni"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Sto cercando i pacchetti disponibili"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Sto cercando i pacchetti da aggiornare"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Il tuo sistema non ha abbastanza spazio rimanente per l'installazione o\n"
-"l'aggiornamento (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minima (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Raccomandata (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Per favore scegli di caricare o salvare la selezione pacchetti su floppy.\n"
-"Il formato è lo stesso dei floppy generati con auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Carica da floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Caricamento da floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Selezione pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Inserisci un floppy contenente la scelta dei pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Salva su floppy"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Lo spazio indicato è maggiore dello spazio disponibile"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tipo di installazione"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Non avete selezionato nessun gruppo di pacchetti.\n"
-"Per favore scegliete il tipo di installazione minima desiderato:"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Con X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Con la documentazione essenziale (raccomandata!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Installazione veramente minima (in particolare niente urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se hai tutti i CDs nella lista qui sopra, clicca Ok.\n"
-"Se non hai nessuno di questi CDs, clicca su Annulla.\n"
-"Se mancano solo alcuni dei CD, deselezionali, e poi clicca Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom chiamato \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Sto preparando l'installazione"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installazione del pacchetto %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configurazione post installazione"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Per favore inserisci il floppy di avvio utilizzato nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Per favore inserisci il floppy di aggiornamento moduli nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Hai ora la possibilità di scaricare software per la cifratura dei dati.\n"
-"\n"
-"ATTENZIONE !\n"
-"A causa dei diversi requisiti generali applicabili a questi software e\n"
-"imposti da varie nazioni, clienti e/o utenti finali di questi software "
-"dovrebbero\n"
-"assicurarsi che le leggi della propria nazione consentano di scaricare, "
-"archiviare\n"
-"e/o usare questo tipo di software.\n"
-"\n"
-"Inoltre clienti e/o utenti finali dovrebbero prestare particolare attenzione "
-"a non infrangere\n"
-"le leggi della propria nazione. Se clienti e/o utenti finali non dovessero\n"
-"rispettare i dettami di tali leggi in vigore, potrebbero incorrere in gravi\n"
-"sanzioni.\n"
-"\n"
-"Sia Mandrakesoft sia i suoi produttori e fornitori non potranno essere "
-"ritenuti responsabili\n"
-"per danni speciali, indiretti o accidentali (inclusi, ma non limitati a, "
-"perdite\n"
-"di guadagni, interruzioni di affari, perdita di dati commerciali e altre "
-"perdite\n"
-"pecuniarie, ed eventuali multe e indennità da pagare a seguito di sentenza "
-"di \n"
-"tribunale) derivanti da uso, possesso, o semplice scaricamento di questi "
-"software,\n"
-"a cui clienti e/o utenti finali abbiano eventuale accesso dopo aver "
-"sottoscritto\n"
-"il presente accordo.\n"
-"\n"
-"Per ogni eventuale delucidazione in relazione a questo argomento, si prega "
-"di\n"
-"contattare\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Adesso avete la possibilità di scaricare dei pacchetti aggiornati che sono\n"
-"stati distribuiti dopo l'uscita della distribuzione.\n"
-"\n"
-"Riceverete aggiornamenti relativi alla sicurezza e/o bug fix, ma è "
-"necessario\n"
-"disporre di una connessione a Internet per continuare.\n"
-"\n"
-"Volete installare gli aggiornamenti?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Connessione con il sito Mandrake Linux per avere la lista dei mirror "
-"disponibili"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Scegli un mirror da cui prendere i pacchetti"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Conessione al mirror per avere la lista dei pacchetti disponibili"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Qual'è il tuo fuso orario?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "L'orologio del tuo hardware è settato su GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronizzazione automatica dell'ora (usando NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Server NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Server CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nessuna stampante"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Hai una scheda audio ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Lanciate \"sndconfig\" dopo l'installazione per configurare la vostra scheda "
-"audio"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Non è stata rilevata nessuna scheda audio. Provate con \"harddrake\"\n"
-"dopo l'installazione."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Riepilogo"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuso orario"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Stampante"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Scheda ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Scheda audio"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Scheda TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "File locali"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Scegli password per root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nessuna Password"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Questa password è troppo semplice (deve essere almeno di %d caratteri)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticazione"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autenticazione LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Server LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autenticazione NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disco di avvio personalizzato provvede un modo di accesso al tuo sistema\n"
-"Linux senza dipendere dal normale bootloader. Ciò è utile se non vuoi\n"
-"installare SILO sul tuo sistema, o un altro sistema operativo rimuove\n"
-"SILO o SILO non funziona con la tua configurazione hardware. Un disco di "
-"avvio\n"
-"personalizzato può anche essere usato con l'immagine di salvataggio di\n"
-"Mandrake, rendendo molto più facile il ripristino dopo gravi errori\n"
-"del sistema.\n"
-"\n"
-"Se vuoi creare un disco di avvio per il tuo sistema, inserisci un floppy\n"
-"nel primo drive e premi \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primo drive floppy"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Secondo drive floppy"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Salta"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disco di avvio personalizzato provvede un modo di accesso al tuo sistema\n"
-"Linux senza dipendere dal normale bootloader. Ciò è utile se non vuoi\n"
-"installare LILO (o Grub) sul tuo sistema, o un altro sistema operativo "
-"rimuove\n"
-"LILO o LILO non funziona con la tua configurazione hardware. Un disco di "
-"avvio\n"
-"personalizzato può anche essere usato con l'immagine di salvataggio di\n"
-"Mandrake, rendendo molto più facile il ripristino dopo gravi errori\n"
-"del sistema. Vuoi creare un disco di avvio per il tuo sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ATTENZIONE! State usando XFS per la vostra partizione radice,\n"
-"molto probabilmente non sarà possibile creare un floppy di 1.44 Mb\n"
-"perché XFS necessita di in driver molto grande)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Spiacente, nessun drive floppy disponibile"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Scegli il drive floppy che vuoi utilizzare per creare il disco di avvio"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inserisci un floppy nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creazione disco di avvio"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparazione del bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Apparentemente disponi di una macchina OldWorld o\n"
-" sconosciuta, il bootloader yaboot non andrà bene per te.\n"
-"L'installazione continuerà, ma dovrai usare\n"
-" BootX per avviare il tuo computer"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Vuoi usare aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Errore installando aboot, \n"
-"provo a forzare l'installazione anche se ciò distrugge la prima partizione?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Sto installando il bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Installazione del bootloader fallita. Si è verificato il seguente errore:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Potrebbe essere necessario cambiare il dispositivo di boot Open Firmware\n"
-" per abilitare il bootloader. Se non vedete il prompt del bootloader\n"
-" dopo il riavvio, premete Command-Option-O-F al riavvio e digitate:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Poi digitate: shut-down\n"
-"Al boot successivo dovreste vedere il prompt del bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserisci un floppy vuoto nel drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Sto creando il floppy di auto installazione"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alcune fasi non sono completate.\n"
-"\n"
-"Vuoi veramente interrompere adesso?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Congratulazioni, l'installazione è completa.\n"
-"Rimuovi il disco di avvio e premi Invio per riavviare il sistema.\n"
-"\n"
-"\n"
-"Per informazioni su aggiornamenti disponibili per questa release di Linux\n"
-"Mandrake, consulta l'Errata disponibile su\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informazioni su come configurare il tuo sistema sono disponibili nel "
-"capitolo\n"
-"sulla post-installazione della Guida Ufficiale dell'Utente Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Crea il floppy di auto installazione"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L'auto installazione può essere del tutto automatizzata se desiderate,\n"
-"ma in tal caso il programma partizionerà automaticamente il disco!!\n"
-"(questa opzione è pensata per l'installazione su un'altra macchina).\n"
-"\n"
-"Probabilmente preferirete ripetere l'installazione.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizzata"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ripeti"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Salva scelta pacchetti"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installazione Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> muove il cursore   | <Barra> seleziona | <F12> videata succ."
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu manca"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "manca l'aiuto per la console"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Scegli un file"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanzato"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Di base"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Attendere prego"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Espandi struttura"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Raggruppa struttura"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Cambia tra ordinamento semplice o a gruppi"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Scelta errata, prova di nuovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "La tua scelta? (default %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entrate che dovrete riempire:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "La tua scelta? (0/1, default `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Pulsante `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Vuoi cliccare su questo pulsante?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "La tua scelta? (default `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Ci sono molte cose fra cui scegliere (%s)\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Per favore scegliete il primo numero dell'intervallo di 10 che desiderate\n"
-"modificare, oppure premete Invio per continuare.\n"
-"La vostra scelta?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Attenzione, un'etichetta è cambiata:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Riproporre"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Tedesca"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spagnola"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandese"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francese"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvegese"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polacca"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russa"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Svedese"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Tastiera UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Tastiera US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanese"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armena (vecchia)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armena (macchina da scrivere)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetica)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjana (latina)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgara (fonetica)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgara (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliana (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorussa"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svizzera (mappa tedesca)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svizzera (mappa francese)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceca (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Tedesca (nessun tasto morto)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danese"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norvegese)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svedese)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estone"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiana (mappa \"Russa\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiana (mappa \"Latina\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greca"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungherese"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeliana"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeliana (Fonetica)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniana"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandese"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiana"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Giapponese 106 tasti"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Tastiera Coreana"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino Americana"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituana AZERTY (vecchia)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituana AZERTY (nuova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituana \"numero riga\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituana \"fonetica\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettone"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedone"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Olandese"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polacca (mappa qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polacca (mappa qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portoghese"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadese (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romena (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romena (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russa (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovena"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovacca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovacca (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serba (cirillica)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tastiera Thai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tastiera Tajik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turca (modulo \"F\" tradizionale)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turca (modello \"Q\" moderno)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Tastiera US (internazionale)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"riga numerica\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslava (latino)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Tasto Alt di destra"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Entrambi i tasti Shift allo stesso tempo"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "I tasti Ctrl e Shift allo stesso tempo"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Il tasto CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Tasti Ctrl e Alt allo stesso tempo"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "I tasti Alt e Shift allo stesso tempo"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Tasto \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Tasto \"Windows\" di sinistra"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Tasto \"Windows\" di destra"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Mount circolari %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Prima rimuovi i volumi logici\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Il supporto PCMCIA non è più disponibile per i kernel 2.2, per favore usate "
-"un kernel 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse con rotellina su porta PS2 generico "
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius Netscorll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 pulsante"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse generico a 2 Pulsanti"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ruota"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriale"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse generico a 3 Pulsanti"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech serie CC (seriale)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "Serie MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (seriale, vecchio tipo C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 pulsanti"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 pulsanti"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nessuno"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nessun mouse"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Per favore prova il mouse"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Per attivare il mouse"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MUOVI LA RUOTA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finisci"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Avanti ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Indietro"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "È corretto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connetti a Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Il modo più comune per connettersi con adsl è pppoe.\n"
-"Alcune connessioni usano pptp, poche usano dhcp.\n"
-"Se non sai, scegli 'usa pppoe'."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usa dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usa pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usa pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quale cliente dhcp vuoi usare?\n"
-"Quello predefinito è dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nessun adattatore di rete ethernet è stato rilevato nel tuo sistema.\n"
-"Non posso configurare questo tipo di connessione."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Scegli l'interfaccia di rete"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Per favore scegli quale adattatore di rete vuoi usare per connetterti a "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nessuna scheda di rete trovata"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Sto configurando la rete"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Per favore inserisci il tuo nome host se lo conosci.\n"
-"Alcuni server DHCP richiedono il nome host per funzionare.\n"
-"Il tuo nome host dovrebbe essere un nome pienamente qualificato,\n"
-"come ''mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nome host"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Wizard della configurazione di rete"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN esterno"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Scheda ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Di che tipo è la tua connessione ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Che configurazione ISDN preferisci?\n"
-"\n"
-"* La Vecchia configurazione usa isdn4net. Contiene strumenti potenti,\n"
-"  ma è difficile da configurare per un principiante, e non standard.\n"
-"\n"
-"* La Nuova configurazione è più facile da capire, più aderente allo\n"
-"  standard, ma dispone di un numero di strumenti inferiore.\n"
-"\n"
-"Raccomandiamo la configurazione leggera.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nuova configurazione (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Vecchia configurazione (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configurazione ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Scegli il tuo provider.\n"
-" Se non è nella lista, scegli Fuori Lista"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocollo per l'Europa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocollo per l'Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocollo per il resto del mondo"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocollo per il resto del mondo \n"
-" no D-Channel (linee in affitto)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Quale protocollo vuoi usare?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Che tipo di scheda hai?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Non so"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se hai una scheda ISA, i valori nella prossima schermata dovrebbero essere "
-"giusti.\n"
-"\n"
-"Se hai una scheda PCMCIA, devi sapere IRQ e I/O della tua scheda.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Annulla"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continua"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Qual'è la tua scheda ISDN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ho trovato una scheda ISDN PCI, ma non so di che tipo. Per favore seleziona "
-"una scheda PCI nella prossima schermata."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Non trovo nessuna scheda ISDN PCI. Per favore selezionane una \n"
-"nella prossima schermata."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Per favore scegli a che porta seriale è connesso il tuo modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opzioni di chiamata"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome connessione"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Numero telefonico"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID di accesso"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Basata su script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Basata su terminale"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome dominio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primo server DNS (opzionale)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Secondo server DNS (opzionale)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi disconnetterti o riconfigurare la tua connessione."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi configurare nuovamente la connessione."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Adesso sei connesso a Internet"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Puoi connetterti a Internet o configurare nuovamente la connessione."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "In questo momento non sei connesso a Internet"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Connetti"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Disconnetti"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configura la connessione"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Connessione & configurazione Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Adesso proseguiremo con la configurazione della connessione %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Stiamo per configurare la connessione %s.\n"
-"\n"
-"\n"
-"Premi OK per cominciare."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configurazione della rete"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Dato che stai effettuando una installazione via rete, quest'ultima è già "
-"configurata.\n"
-"Clicca su Ok per mantenere questa configurazione, o su Annulla per "
-"riconfigurare la rete e la connessione a Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvenuti nel Wizard di configurazione della Rete!\n"
-"\n"
-"Stiamo per configurare la vostra connessione di rete/a Internet.\n"
-"Se non volete usare il riconoscimento automatico, deselezionate il \n"
-"pulsante d'opzione.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Scegli il profilo da configurare"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usa il riconoscimento automatico"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Riconoscimento periferiche..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Connessione normale via modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "rilevato sulla porta: %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Connessione ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "rilevato %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Connessione ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "rilevato sull'interfaccia %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Connessione via cavo"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Rilevata connessione via cavo"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Connessione LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "rilevata scheda(e) ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Scegli il tipo di connessione che vuoi configurare"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Hai configurato diversi tipi di connessione a Internet.\n"
-"Scegli quello che vuoi usare.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Connessione a Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Vuoi effettuare la connessione all'avvio?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configurazione della rete"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "La rete dev'essere riavviata"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Si è verificato un problema al momento di riavviare la rete: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Congratulazioni, la configurazione della rete e di Internet è finita.\n"
-"\n"
-"Adesso questa configurazione verrà applicata al vostro sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Dopo che questo sarà stato fatto, vi raccomandiamo di riavviare il\n"
-"vostro ambiente X per evitare problemi relativi al cambio di hostname."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Si sono verificati dei problemi durante la configurazione.\n"
-"Provate la connessione usando net_monitor o mcc. Se la connessione non "
-"funziona, dovreste ripetere la configurazione."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATTENZIONE: questo dispositivo è stato precedentemente configurato per\n"
-"connettersi a Internet.\n"
-"Devi solo cliccare su OK per mantenere la precedente configurazione.\n"
-"Modifiche ai campi qui sotto cambieranno questa configurazione."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Per favore inserisci la configurazione IP per questa macchina.\n"
-"Ogni dato dovrebbe essere inserito come un indirizzo IP in notazione\n"
-"decimale puntata (ad esempio 1.2.3.4.)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Sto configurando il dispositivo di rete %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Indirizzo IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automatico"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'indirizzo IP deve essere in formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Per favore inserisci il tuo nome host.\n"
-"Il tuo nome host dovrebbe essere uno pienamente qualificato,\n"
-"come ''mybox.mylab.myco.com''.\n"
-"Puoi anche inserire l'indirizzo IP del gateway se ne hai uno."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (es. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo di gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configurazione dei proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Individua identità della scheda audio (utile per i laptop)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Il proxy dovrebbe essere http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Il proxy dovrebbe essere ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configurazione di internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vuoi provare a connetterti a Internet adesso?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Sto provando la tua connessione ..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Adesso il sistema è connesso a Internet"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Per ragioni di sicurezza, adesso verrà disconnesso."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Il sistema non sembra essere connesso a Internet.\n"
-"Prova a configurare nuovamente la connessione."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configurazione della Connessione"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Per favore riempi o controlla il campo qui sotto"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ della scheda"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoria della scheda (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO della scheda"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 della scheda"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 della scheda"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Il tuo numero di telefono personale"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome del provider (es. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Numero telefonico del provider"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 del provider (opzionale)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 del provider (opzionale)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Scegli la tua nazione"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modalità di chiamata"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Velocità della connessione"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout della connessione (in secondi)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login dell'account (nome utente)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Password dell'account"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mount fallito: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partizione estesa non supportata su questa piattaforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hai un buco nella tua tabella delle partizioni, ma io non posso usarlo.\n"
-"L'unica soluzione è di muovere le tue partizioni primarie per avere il buco "
-"vicino alle partizioni estese"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ripristino da file %s fallito: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "File di backup errato"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Errore scrivendo sul file %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Al tuo disco sta accadendo qualcosa di brutto. \n"
-"Un test per verificare l'integrità dei dati è fallito. \n"
-"Significa che scrivere qualsiasi cosa sul disco genererà solo spazzatura a "
-"caso"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "da avere"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "molto bello"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bello"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "forse"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Stampante locale"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Stampante remota"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Stampante su server CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Stampante su server lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Stampante di rete (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Stampante su server SMB/Windows95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Stampante su server NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Indica l'URI di un dispositivo di stamp"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Invia tramite pipe al comando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modello sconosciuto"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Stampanti locali"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Stampanti remote"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " sulla porta parallela \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", stampante USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", dispositivo multifunzione sulla porta parallela \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", dispositivo multifunzione su USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositivo multifunzione su HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", dispositivo multifunzione"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", sto stampando su %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "sul server LPD \"%s\", stampante \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", porta %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "sul server Windows \"%s\", condivisione \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "sul server Novell \"%s\", stampante \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", uso il comando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Stampante di tipo raw (nessun driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(su %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(su questa macchina)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Sul server CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Predefinito)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Scegli Connessione stampante"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Com'è collegata la stampante?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Con un server remoto CUPS, non devi configurare alcuna stampante\n"
-"adesso: le stampanti saranno individuate automaticamente."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Configurazione di CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Indica il server CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Per avere accesso alle stampanti su server CUPS remoti all'interno della "
-"vostra rete locale non dovete configurare niente: i server CUPS informano la "
-"vostra macchina automaticamente in merito alle loro stampanti. Tutte le "
-"stampanti attualmente note alla vostra macchina sono elencate nella sezione "
-"\"Stampanti remote\" di Printerdrake. Quando il server CUPS non si trova "
-"all'interno della vostra rete locale, dovete indicare il suo indirizzo IP e, "
-"facoltativamente, il numero della porta in modo da ottenere le informazioni "
-"relative alla stampante dal server; altrimenti lasciate questi campi in "
-"bianco."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalmente CUPS viene configurato automaticamente in base al vostro "
-"ambiente di rete, in modo che possiate accedere alle sttampanti che "
-"dipendono dai server CUPS sulla vostra rete locale. Se questa caratteristica "
-"non funziona correttamente, disabilitate \"Configurazione automatica di CUPS"
-"\" e modificate manualmente il file /etc/cups/cupsd.conf. Non dimenticatevi "
-"di riavviare CUPS subito dopo (col comando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'indirizzo IP deve essere in formato 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Il numero della porta dovrebbe essere un numero intero!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP del server CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Configurazione automatica di CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Riconoscimento periferiche ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test delle porte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Aggiungi nuova stampante"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Benvenuti nell'assistente di configurazione delle stampanti\n"
-"\n"
-"Questo assistente vi permette di installare stampanti remote o locali che "
-"verranno usate da questa macchina e anche da altre macchine sulla rete.\n"
-"\n"
-"Vi chiederà tutte le informazioni necessarie per configurare la stampante, "
-"dandovi accesso a tutti i driver, opzioni dei driver e tipi di connessione "
-"disponibili."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Stampante locale"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Benvenuti nell'assistente di configurazione delle stampanti\n"
-"\n"
-"Questo assistente vi aiuterà a configurare le stampanti collegate a questo "
-"computer.\n"
-"\n"
-"Per favore collegate la vostra stampante al computer e accendetela. Cliccate "
-"su \"Succ\" quando siete pronti, e su \"Annulla\" se non desiderate "
-"configurare le vostre stampanti adesso.\n"
-"\n"
-"Si noti che alcuni computer potrebbero bloccarsi durante il riconoscimento "
-"automatico delle stampanti, in tal caso disabilitate questa caratteristica "
-"per poter effettuare l'installazione. Usate il modo Esperto di Printerdrake "
-"quando volete configurare la stampa su una stampante remota se Printerdrake "
-"non la include nell'elenco automaticamente."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Riconoscimento automatico stampanti"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Congratulazioni, adesso la vostra stampante è installata e configurata!\n"
-"\n"
-"Potete stampare usando il comando \"Stampa\" delle vostre appllicazioni (in "
-"genere si trova nel menu File\").\n"
-"\n"
-"Se desiderate aggiungere, rimuovere o rinominare una stampante, o se volete "
-"modificare la configurazione predefinita (cassetto della carta, qualità di "
-"stampa, etc.), selezionate \"Stampante\" nella sezione \"Hardware\" del "
-"Centro di controllo Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Riconoscimento automatico delle stampanti"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake è in grado di riconoscere automaticamente una stampante "
-"collegata localmente su una porta parallela o USB, ma si noti che su alcuni "
-"sistemi il riconoscimento automatico PUÒ BLOCCARE IL SISTEMA E QUESTO PUÒ "
-"CAUSARE LA CORRUZIONE DEL FILESYSTEM! Pertanto fatelo A VOSTRO RISCHIO E "
-"PERICOLO!\n"
-"\n"
-"Volete davvero che le stampanti vengano riconosciute automaticamente?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Usa il riconoscimento automatico"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Configurazione manuale della stampante"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Rilevato %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Stasmpante sulla porta parallela \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Stampante USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Non è stata trovata nessuna stampante locale! Per installare manualmente una "
-"stampante indicate il nome di un dispositivo o di un file nel campo di "
-"immissione (porte parallele: /dev/lp0, /dev/"
-"lp1, ..., equivalenti a LPT1:, LPT2:, ...; prima stampante USB: /dev/usb/"
-"lp0, seconda: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Devi indicare il nome di un dispositivo o di un file!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Non ho trovato nessuna stampante locale!\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Le stampanti di rete possono essere installate soltanto dopo "
-"l'installazione. Scegliete \"Hardware\" e poi \"Stampante\" nel Centro di "
-"controllo Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Per installare stampanti di rete, cliccate su \"Annulla\", passate al \"Modo "
-"esperto\" e cliccate su \"Aggiungi nuova stampante\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"La stampante che segue è stata riconosciuta automaticamente, se non è quella "
-"che desiderate configurare inserite un nome di dispositivo o di file nel "
-"campo immissione testo"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Ecco una lista di tutte le stampanti che sono state riconosciute "
-"automaticamente. Per favore, scegliete quella che volete configurare, oppure "
-"inserite il nome di un dispositivo o di un file nel campo di immissione "
-"testo."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"La stampante che segue è stata riconosciuta automaticamente. La "
-"configurazione della stampante verrà effettuata automaticamente. Se la "
-"vostra stampante non è stata riconosciuta in modo corretto, o se preferite "
-"una configurazione personalizzata, cliccate su \"Configurazione manuale\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Ecco una lista di tutte le stampanti che sono state riconosciute "
-"automaticamente. Per favore scegliete la stampante che volete configurare, "
-"la configurazione verrà effettuata in modo del tutto automatico. Se la "
-"vostra stampante non è stata riconosciuta correttamente, o se preferite una "
-"configurazione personalizzata, cliccate su \"Configurazione manuale\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Per favore scegliete la porta alla quale è connessa la vostra stampante, "
-"oppure inserite il nome di un dispositivo o di un file nel campo di "
-"immissione testo"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-"Per favore scegliete la porta alla quale è connessa la vostra stampante."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Porte parallele: /dev/lp0, /dev/lp1, ..., equivalenti a LPT1:, LPT2:, ...; "
-"prima stampante USB: /dev/usb/lp0, seconda: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Dovete scegliere/indicare una stampante/un dispositivo!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Configurazione manuale"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"La vostra stampante è un dispositivo multifunzione prodotto da HP "
-"(OfficeJet, PSC, PhotoSmart, LaserJet 1100/1200/1220/3200/3300 con scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installazione del pacchetto HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Controllo dispositivo e configuro HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installazione del pacchetto SANE"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Effettuo una scansione con il vostro dispositivo multifunzione HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Rendo la porta della stampante disponibile per CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Sto leggendo il database delle stampanti"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opzioni stampante lpd remota"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Per usare una stampante lpd remota, dovete indicare\n"
-"il nome dell'host del server della stampante e il nome della stampante\n"
-"su quel server."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nome host remoto"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nome della stampante remota"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nome host remoto assente!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nome della stampante remota assente!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opzioni Stampante SMB (Windows9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Per stampare su una stampante SMB, dovete indicare il nome\n"
-"dell'host SMB (Attenzione! non sempre corrisponde al nome host TCP/IP\n"
-"della macchina!) e possibimente l'indirizzo IP del server di stampa, come\n"
-"pure il nome di condivisione per la stampante cui volete accedere e ogni\n"
-"informazione utile riguardo nome dell'utente, password e gruppo di lavoro."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Host del server SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP del server SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome di condivisione"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Gruppo di lavoro"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Devi indicare il nome del server o il numero IP dello stesso!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Il nome della condivisione Samba è assente!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opzioni stampante NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Per stampare su una stampante NetWare, dovete fornire il nome\n"
-"del server di stampa NetWare (Attenzione! potrebbe essere diverso dal nome\n"
-"del suo host TCP/IP!) insieme al nome della coda di stampa per la\n"
-"stampante cui volete accedere e ogni nome utente e password applicabili."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server della stampante"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome della coda di stampa"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Il nome del server NCP è assente"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Il nome dellla coda NCP è assente!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Opzioni della stampante TCP/Socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Per stampare su una stampante TCP/Socket, dovete indicare il\n"
-"nome host della stampante e opzionalmente il numero della porta.\n"
-"Sui server HP JetDirect il numero della porta in genere è 9100, su\n"
-"altri server potrebbe essere diverso. Consultate il manuale del vostro\n"
-"hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nome host della stampante"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nome host della stampante assente!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI della stampante"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Potete indicare direttamente l'URI di accesso alla stampante. Tale URI deve "
-"essere conforme alle specifiche CUPS o Foomatic. Notate che non tutti i i "
-"tipi di URI sono supportati da tutti gli spooler."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Dev'essere inserito un'URI valido!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ogni stampante deve avere un nome (ad esempio \"stampante\").\n"
-"Non è indispensabile riempire i campi Descrizione e \n"
-"Posizione. Si tratta di commenti per gli utenti."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome della stampante"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descrizione"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Posizione"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Sto preparando il database delle stampanti ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Il modello della vostra stampante"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Il modello è corretto"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Selezionate il modello manualmente"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Scelta del modello della stampante"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Che modello di stampante hai?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Per favore, controllate che Printerdrake abbia effettuato correttamente il "
-"riconoscimento automatico della vostra stampante. Se il cursore si trova su "
-"un modello errato o su \"Stampante di tipo raw\", cercate quello corretto "
-"nella lista."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Se la vostra stampante non è presente nella lista, cercate un modello "
-"compatibile o simile (consultate il manuale della stampante)."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Configurazione di una stampante OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Configurazione di una stampante Lexmark a getto d'inchiostro"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Impostazioni predefinite della stampante\n"
-"\n"
-"Dovreste accertarvi che le dimensioni della pagina e il tipo di inchiostro/"
-"modo di stampa (se disponibile) e anche la configurazione hardware delle "
-"stampanti laser (memoria, unità duplex, cassetti supplementari) siano "
-"impostati correttamente. Si noti che quando la qualità/risoluzione di stampa "
-"è molto alta, la durata della stampa può diventare sensibilmente più lenta."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'opzione %s dev'essere un numero intero!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'opzione %s dev'essere un numero!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opzione %s fuori scala!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Volete impostare questa stampante (\"%s)\n"
-"come stampante predefinita?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Pagine di prova"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Nessuna pagina di prova"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Stampa"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Pagina di prova standard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Pagina di prova alternativa (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Pagina di prova fotografica"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Non stampare nessuna pagina di prova"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Stampa della(e) pagina(e) di prova..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La pagina(e) di prova è stata inviata alla stampante.\n"
-"Potrebbe occorrere un po' di tempo prima che la stampa inizi.\n"
-"Stato della stampa:\n"
-"%s\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La pagina(e) di prova è stata inviata alla stampante.\n"
-"potrebbe occorrere un po' di tempo prima che la stampa inizi.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Stampante in modo raw"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Chiudi"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Stampa/Scansione in corso su \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Sto stampando con la stampante \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista opzioni di stampa"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Sto leggendo i dati della stampante..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Configurazione della stampante a trasferimento"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Il nome della stampante dovrebbe contenere solo lettere, numeri e il "
-"trattino di sottolineatura"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nuovo nome della stampante"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Sto aggiornando i dati della stampante ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Configura di una stampante remota"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Sto attivando la connessione di rete ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configura la rete adesso"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Funzionalità di rete non configurate"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Vai avanti senza configurare la rete"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Sto riavviando il sistema di stampa ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "alto"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Avvio il sistema di stampa al momento del boot"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Scegli il sistema di stampa"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Che sistema di stampa (spooler) vuoi usare?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Sto configurando la stampante \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installazione del pacchetto Foomatic"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opzioni stampante"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Sto preparando PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Configurazione applicazioni ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Vorresti configurare la stampa?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Cambia il sistema di stampa"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo Normale"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Volete configurare un'altra stampante?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modifica configurazione stampante"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Stampante %s\n"
-"Cosa volete modificare riguardo questa stampante?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tipo di connessione della stampante"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nome, descrizione, collocazione della stampante"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Stampa della(e) pagina(e) di prova"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Sapere come usare questa stampante"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Rimuovi stampante"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Sto rimuovendo la vecchia stampante \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Stampante predefinita"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Volete davvero rimuovere la stampante \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Sto rimuovendo la stampante \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configurazione dei proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Benvenuto nell'utilità di configurazione dei proxy.\n"
-"\n"
-"Qui potrai configurare i tuoi proxy http e ftp,\n"
-"con o senza login e password\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Per favore completa le informazioni relative al proxy http\n"
-"Lascia in bianco se non desideri un proxy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Porta"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "L'URL dovrebbe cominciare con 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Il numero della porta dovrebbe essere in cifre"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Per favore completa le informazioni relative al proxy ftp\n"
-"Lascia in bianco se non desideri un proxy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "L'URL dovrebbe cominciare con 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Per favore inserisci il login e la password per il proxy, se esistono.\n"
-"Lascia in bianco se non è necessario."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Password"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "digita ancora la password"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Le password non corrispondono. Prova ancora!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Non posso aggiungere una partizione a _RAID_ formattato md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Non posso scrivere il file %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fallito"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fallito (forse manca raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Non ci sono abbastanza partizioni per RAID livello %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Lancia il sistema audio ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un gestore di comandi periodici."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd è usato per monitorare lo stato delle batterie e fare il log tramite\n"
-"syslog. Può anche essere usato per spegnere la macchina quando la batteria\n"
-"è scarica."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Lancia comandi programmati dal comando at al momento specificato quando\n"
-"at è stato lanciato, e lancia comandi batch quando il carico medio è\n"
-"sufficientemente basso."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron è un programma UNIX standard che lancia programmi definiti dall'utente\n"
-"a intervalli periodici programmati. vixie cron aggiunge un numero di "
-"funzioni\n"
-"al cron UNIX di base, inclusi maggior sicurezza e opzioni di "
-"configurazione \n"
-"più potenti."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aggiunge il supporto del mouse ad applicazioni Linux basate su testo "
-"come\n"
-"Midnight Commander. Permette anche operazioni taglia/incolla via mouse in \n"
-"console e include supporto per dei menu a scomparsa in console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake esegue un'indagine riguardo l'hardware, e opzionalmente\n"
-"configura l'hardware nuovo/cambiato."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache è un server per World Wide Web. È usato per gestire files HTML\n"
-"e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Il demone superserver di Internet (comunemente chiamato inetd) avvia una\n"
-"varietà di altri servizi Internet a richiesta. È responsabile per l'avvio\n"
-"di molti servizi, inclusi telnet, ftp, rsh, e rlogin. Disabilitando inetd\n"
-"si disabilitano tutti i servizi di cui è responsabile."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lancio del filtro dei pacchetti per la serie di kernel 2.2, allo\n"
-"scopo di impostare un firewall che protegga la tua macchina da intrusioni."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Questo pacchetto carica la mappa di tastiera selezionata come definito in\n"
-"/etc/sysconfig/keyboard, che può essere scelta usando l'utilità kdbconfig.\n"
-"Dovresti lasciarlo abilitato per la maggior parte delle macchine."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Rigenerazione automatica dell'intestazione del kernel /boot per\n"
-"/usr/include/linux/{autoconf,versione}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Riconoscimento e configurazione automatica dell'hardware al boot."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf talvolta deve eseguire alcune operazioni al momento\n"
-"del boot per gestire la configurazione del sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd è il demone di stampa richiesto perchè lpr funzioni propriamente. È\n"
-"fondamentalmente un server che distribuisce i job di stampa alle stampanti."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, usato per impostare un server ad alte prestazioni\n"
-"e alta disponibilità."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) è un Domain Name Server (DNS) utilizzato per risolvere\n"
-"nomi host in indirizzi IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e smonta tutti i punti di mount di Network File System (NFS),\n"
-"SMB (Lan Manager/Windows), e NCP (Netware)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Attiva/Disattiva tutte le interfacce di rete di cui è previsto l'avvio\n"
-"al momento del boot."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS è un popolare protocollo per la condivisione di file attraverso reti\n"
-"TCP/IP. Questo servizio consente funzionalità di server NFS, che sono\n"
-"configurate tramite il file /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS è un popolare protocollo per la condivisione di file attraverso reti TCP/"
-"IP.\n"
-"Questo servizio consente funzionalità di blocco dei file NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Attiva automaticamente il tasto relativo al tastierino numerico\n"
-"per la console e XFree al momento del boot."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Supporto per le stampanti Windows OKI 4w e compatibili."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Il supporto PCMCIA di solito serve per usare dispositivi di tipo ethernet e\n"
-"modem nei portatili. Non sarà lanciato se non è stato configurato, perciò "
-"è \n"
-"sicuro da avere installato anche su macchine che non lo richiedono."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Il portmapper gestisce connessioni RPC, che sono usate da protocolli\n"
-"come NFS e NIS. Il server portmap deve essere in esecuzione su macchine che\n"
-"agiscono come server per protocolli che fanno uso di meccanismi RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix è un Agente di Trasporto di Posta, un programma che\n"
-"sposta messaggi da una macchina ad un'altra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salva e ripristina l'entropia del sistema per una generazione di numeri\n"
-"casuali di alta qualità."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assegna dispositivi raw a dispositivi a blocchi (quali le partizioni\n"
-"di un disco rigido), da usare con applicazioni come Oracle."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Il demone routed permette tabelle di router IP automatiche aggiornate per\n"
-"mezzo del protocollo RIP. Mentre RIP è largamente usato in piccole reti, \n"
-"protocolli di routing più complessi sono necessari per reti più complesse."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Il protocollo rstat permette agli utenti di una rete di recuperare\n"
-"misurazioni delle prestazioni per ogni macchina di quella rete."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Il protocollo rusers permette agli utenti di una rete di identificare\n"
-"chi è connesso su una macchina interrogata in proposito."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Il protocollo rwho permette a utenti remoti di ottenere una lista di \n"
-"tutti gli utenti connessi a una macchina su cui gira il demone rwho\n"
-"(similarmente a finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Lancia il sistema audio sulla tua macchina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog è una utilità che molti demoni usano per aggiungere messaggi\n"
-"in vari file di log di sistema. È una buona idea lanciare sempre syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carica i driver per i tuoi dispositivi USB."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Avvia il server di caratteri (indispensabile per eseguire XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Scegli quali servizi saranno lanciati automaticamente all'avvio."
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Stampa"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Amministrazione remota"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server di database"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servizi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "in esecuzione"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "fermato"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servizi e demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Spiacente, ma non ci sono ulteriori\n"
-"informazioni riguardo questo servizio."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Al boot"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Avvia"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Unisciti al mondo del software libero"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet e messaggistica istantanea"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia e Grafica"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Sviluppo"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Centro di Controllo Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Interfacce utente"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Software per server"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Giochi"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installazione dei pacchetti ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Non posso leggere la tua tabella delle partizioni, è troppo\n"
-"corrotta per me :( . Proverò a cancellare le partizioni rovinate."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Errore!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configurazione installazione automatica"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configurazione automatica fasi di installazione"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Congratulazioni!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Installazione automatica"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Aggiungi una voce"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Rimuovi l'ultima voce"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr "***********************************************************************\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progresso totale"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup dei file di sistema..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "File di backup su disco rigido..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Backup dei file dell'utente"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Progresso del backup del disco rigido..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Backup di altri file"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Selezione file"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Selezionate i file e le directory e cliccate su 'Aggiungi'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Per favore abilitate tutte le opzioni necessarie\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Queste opzioni possono effettuare il backup e il ripristino di tutti i file "
-"nella\n"
-"vostra directory /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Backup dei vostri file di sistema (directory /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Usa backup incrementali (non sostituire i vecchi backup)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Non includere file critici (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Grazie a questa opzione sarete in grado di ripristinare ogni versione della\n"
-"vostra directory /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Per favore scegli tutti gli utenti che vuoi includere nel backup"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Non includere la cache del navigatore"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Usa backup incrementali (non sostituire i vecchi backup)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Rimuovi quelli selezionati"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Utenti"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Per favore inserisci il nome dell'host o l'IP"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Per favore inserisci il tuo nomei di login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Per favore inserisci la tua password"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Ricorda questa password"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Connessione FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Connessione sicura"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Per favore, scegliete lo spazio su CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Per favore, accertatevi di usare supporti CD-RW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Per favore, controllate se volete includere\n"
-"il boot di install sul CD"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Per favore, inserite il numero che identifica il vostro masterizzatore\n"
-"ad esempio: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Usa unità a nastro per effettuare il backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Per favore, inserite il nome del dispositivo da usare per il backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Per favore, indicate le dimensioni massime\n"
-"concesse a Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Per favore inserisci la directory da salvare:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Usa una quota per i file di backup."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Rete"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Disco rigido  / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ogni ora"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "ogni giorno"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "settimanale"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "ogni mese"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Usa demone"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Per favore, scegli la frequenza\n"
-"del backup"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Per favore, scegli il supporto\n"
-"del backup"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Usa disco rigido con il demone"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Usa FTP con il demone"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Per favore, accertatevi che il demone cron sia incluso fra i servizi attivi"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Dopo ogni backup invia una mail rapporto a:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Cosa"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Dove"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Quando"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Altre opzioni"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Configurazione di Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Per favore scegliete dove volete effettuare il backup"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "sul disco rigido"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "sulla rete"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Per favore scegliete i pacchetti che volete installare."
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sistema di backup"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Fai il backup degli utenti"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Seleziona l'utente manualmente"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Fonti del backup: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- File di sistema:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- File degli utenti:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Altri file:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Salva su disco rigido seguendo il percorso: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Salva via FTP sull'host: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nome utente: %s\n"
-"\t\t sul percorso: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"-Opzioni:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNon includere file di sistema\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tEffettua backup usando tar e bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tI backup fanno uso di tar e gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disco rigido.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rete via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rete via SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Nessun file di configurazione, per favore cliccate su Assistente o "
-"Avanzato.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr "Lista di dati da ripristinare:\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr "Lista di dati corrotti:\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Per favore scegliete a che porta seriale è connesso il vostro modem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "I file di backup sono corrotti"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Tutti i dati selezionati sono stati          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Ripristinati con successo su %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Ripristina configurazione       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK al ripristino degli altri file"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista degli utenti da ripristinare (solo la data più recente per utente è "
-"importante)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Effettua il backup dei file di sistema prima di:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Per favore, scegliete la data da ripristinare"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Usa il disco rigido per effettuare il backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Ripristina da disco rigido"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Per favore, indicate la directory in cui sono archiviati i backup"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Scegliete un altro supporto dal quale effettuare il ripristino"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Altri supporti"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Ripristina sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Ripristina utenti"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Ripristina altro"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "selezionate il percorso del ripristino (invece di / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Effettua nuovo backup prima del ripristino (solo per backup incrementali)."
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Rimuovi le directory dell'utente prima del ripristino."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Ripristina tutti i backup"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Personalizza il ripristino"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Aiuto"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Precedente"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Salva"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Costruisci backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Ripristina"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Successivo"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Per favore fai un backup prima di ripristinarlo...\n"
-" o verifica che il percorso alla directory di salvataggio è corretto."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Errore usando sendmail\n"
-"  la vostra mail di report non è stata inviata\n"
-"  Per favore configurate sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista dei pacchetti da installare"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Errore nella trasmissione del file via FTP.\n"
-" Per favore, controllate la configurazione FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Per favore, scegliete il tipo del vostro mouse."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Per favore, scegliete il tipo del vostro mouse."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Per favore, scegliete il tipo del vostro mouse."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nessun file di configurazione trovato\n"
-"per favore cliccate su Assistente o Avanzato"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Ancora in sviluppo ... attendere per favore."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup dei file di sistema"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup dei file degli utenti"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup di altri file"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Progresso totale"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "trasmissione file via FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Sto inviando i file ..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista di dati da includere su CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Per favore, insersci la velocità del masterizzatore"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-"Per favore inserite il numero che identifica il vostro masterizzatore (es.: "
-"0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Per favore scegliete i pacchetti che volete installare."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Effettua il backup adesso sulla base del file di configurazione"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Vedi la configurazione di backup"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configurazione dell'assistente"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Configurazione avanzata"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Effettua il backup adesso"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-"Alcuni errori nell'invio della posta sono causati da\n"
-"un'errata configurazione di postfix. Per risolvere il problema\n"
-"dovete indicare ilmionomehost o ilmiodominio in /etc/postfix/main.cf\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installazione di %s fallita. Si è verificato il seguente errore:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Cerca fonti installate"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Deseleziona fonti installate"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "esamina tutti i font"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nessun font trovato"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "fatto"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "non ho trovato nessun font nelle partizioni montate"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ri-selezionate i font corretti"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "non ho trovato nessun font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Cerca font nella lista installati"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copia i font"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installazione di font True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "per favore attendere mentre eseguo ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installazione font True Type effettuata"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Conversione font"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "sto costruendo type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "conversione font ttf"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "conversione font pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Soppressione file temporanei"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Riavvia XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Soppressione file dei font"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "riavvia xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Prima di installare qualsiasi font accertatevi di avere il permesso di "
-"installarli e usarli sul vostro sistema.\n"
-"\n"
-"-Potete installare i font nel modo normale. In casi piuttosto rari, dei font "
-"corrotti potrebbero bloccare il vostro server X."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importazione font"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Prendi i font di Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Disintallazione font"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Opzioni avanzate"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista font"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Scegliete le applicazioni che supporteranno i font:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Stampanti generiche"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Selezionate il file o la directory del font e cliccate su 'Aggiungi'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Lista di installazione"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "cliccate qui se ne siete sicuri."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "qui in caso contrario."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Deseleziona tutto"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Tutti selezionati"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Rimuovi lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Test iniziali"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copia i font sul tuo sistema"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installa e converti i font"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-installazione"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Rimuovi i font dal tuo sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-disinstallazione"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Condivisione connessione Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Condivisione della connessione a Internet attualmente abilitata"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il setup della condivisione della connessione Internet è già stato fatto.\n"
-"È attualmente abilitata.\n"
-"\n"
-"Cosa vorresti fare?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "disabilita"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "abbandona"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "riconfigura"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Sto disattivando i server..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "La condivisione della connessione a Internet ora è disabilitata."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Condivisione connessione Internet attualmente disabilitata"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il setup della condivisione della connessione internet è già stato fatto.\n"
-"È attualmente disabilitata.\n"
-"\n"
-"Cosa vorresti fare?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "abilita"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Sto attivando i server..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "La condivisione della connessione a Internet ora è abilitata."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Stai per configurare il tuo computer per condividere la sua connessione a "
-"Internet.\n"
-"Grazie a questa caratteristica, altri computer sulla tua rete locale "
-"potranno usare la connessione a Internet di questa macchina.\n"
-"\n"
-"Nota: è necessario un Adattatore di Rete dedicato per realizzare una\n"
-"Rete di Area Locale (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaccia %s (usa il modulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaccia %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nessun adattatore di rete nel tuo sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nessun adattatore di rete ethernet è stato rilevato nel tuo sistema. Per "
-"favore lancia l'utilità di configurazione hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfaccia di rete"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"C'è un solo adattatore di rete configurato nel tuo sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Sto per configurare la tua rete locale (LAN) usando quell'adattatore."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Per favore scegliete quale adattatore di rete sarà connesso alla vostra rete "
-"locale (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interfaccia di rete già configurata"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Attenzione, la scheda di rete (%s) è già configurata.\n"
-"\n"
-"Desiderate una ri-configurazione automatica?\n"
-"\n"
-"Potete farlo manualmente se sapete quello che state facendo."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Riconfigurazione automatica"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Mostra la configurazione dell'interfaccia corrente"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Configurazione attuale di `%s':\n"
-"\n"
-"Rete: %s\n"
-"Indirizzo IP: %s\n"
-"Attribuzione IP: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Posso conservare la vostra configurazione attuale e supporre che abbiate già "
-"impostato un serverDHCP; in tal caso, per favore controllate che la rete di "
-"classe C che usate per la vostra rete locale sia stata letta correttamente; "
-"non la riconfigurerò e non toccherò la configurazione del vostro server "
-"DHCP.\n"
-"\n"
-"In alternativa, posso riconfigurare la vostra interfaccia di rete e (ri)"
-"configurare un server DHCP per voi.\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Rete locale di classe C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP di (questo) server DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Riconfigurazione dell'interfaccia di rete e del server DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La rete locale non terminava con `.0', rinuncio."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Trovato conflitto potenziale dell'indirizzo LAN nella configurazione "
-"corrente di %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Rilevata configurazione di Firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Attenzione! È stata rilevata una configurazione di firewall esistente. "
-"Potrebbe avere bisogno di alcuni aggiustamenti manuali dopo l'installazione."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Sto configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Sto configurando gli script, installando il software, avviando i server..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi nell'installazione del pacchetto %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Ogni cosa è stata configurata.\n"
-"Ora puoi condividere la connessione a Internet con altri computers sulla tua "
-"rete locale (LAN) usando la configurazione di rete automatica (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Il setup è già stato fatto, ma è attualmente disabilitato."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Il setup è già stato fatto, ed è attualmente abilitato."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr ""
-"Nessuna condivisione della connessione a Internet configurata in precedenza."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvenuti nell'utilità di condivisione della connessione a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Cliccate su ``Configura'' se volete lanciare il Wizard di configurazione."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configurazione della rete (%d adattatori)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profilo: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Cancella profilo..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profilo da cancellare:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nuovo profilo..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nome del profile da creare (il nuovo profilo verrà creato come copia di "
-"quello attuale):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nome host: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Accesso a Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfaccia:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Attendere per favore"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configura l'accesso a Internet"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configurazione LAN (rete locale)"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaccia"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocollo"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Stato"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configura rete locale (LAN)"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Cliccate qui per lanciare l'assistente ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistente..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Applica"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Per favore attendi... sto applicando la configurazione"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Connesso"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Non connesso"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Connetti..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Disconnetti..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Attenzione, è stata individuata un'altra connessione a Internet, forse "
-"attraverso la vostra rete locale"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Non disponi di nessuna interfaccia configurata.\n"
-"Per prima cosa configurale cliccando su 'Configura'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configurazione rete locale (LAN)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adattatore %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocollo di boot"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Attivato/a al momento del boot"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "attivare adesso"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "disattivare adesso"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Questa interfaccia non è stata ancora configurata.\n"
-"Lanciate l'assistente di configurazione nella finestra principale."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Non disponi di una connessione a Internet.\n"
-"Creane una cliccando su 'Configura'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configurazione della connessione a Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo di connessione: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Scheda ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Sto settando il livello di sicurezza"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro di Controllo"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Scegliete l'utilità che volete usare"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cavo)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (cavo)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cavo-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Cina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Giappone (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Giappone (cavo)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europa Orientale"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europa Occidentale"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nuova Zelanda"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Sud Africa"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Per favore, digitate il vostro standard tv e la nazione"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Standard TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Ricerca di canali TV in corso ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Sto cercando canali TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [tastiera]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Per favore, scegliete l'impostazione della tastiera."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vuoi che il tasto BackSpace funzioni come Canc nella console?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cambia il CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Per favore inserisci il Cd-Rom di installazione nel lettore e premi Ok "
-"quando\n"
-"pronto. Se non ce l'hai, premi Annulla per evitare l'aggiornamento diretto."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Non riesco ad avviare l'aggiornamento diretto !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Il cambiamento è stato applicato, ma perché diventi effettivo dovete uscire "
-"dalla sessione"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Mostralo solo per il giorno selezionato"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/_Nuovo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/File/_Apri"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/_Salva"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Save _come"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/File/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opzioni"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opzioni/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Guida"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Aiuto/_Riguardo..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Utente"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messaggi"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Spiegazioni relative agli strumenti Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "cerca"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Un tool per monitorare i tuoi file di Log"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Impostazioni"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "coincidono"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "ma non coincidono"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Scegliete il file"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "calendario"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contenuto del file"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Notifica Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "aspetta, sto analizzando: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configurazione di avvisi email/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Benvenuto nell'utilità di configurazione degli avvisi email/SMS..\n"
-"\n"
-"Qui potrai configurare il sistema di avvisi.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "Proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "configurazione servizio"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Verrete avvisati se uno dei servizi selezionati non è più in esecuzione"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "carica configurazione"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Riceverete una notifica se il carico eccede questo valore"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configurazione avvisi"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configurazione del modo in cui il sistema vi avvertirà"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Salva con nome..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Per favore, scegliete il tipo del vostro mouse."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nessun serial_usb trovato\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emula il terzo pulsante?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "Trovato %s su %s, devo configurarlo?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Scegliete uno scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Questo scanner %s non è supportato"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo di boot"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Questo scanner %s deve essere configurato con printerdrake.\n"
-"Potete lanciare printerdrake dal Centro di controllo Mandrake, sezione "
-"Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configurazione del firewall!"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configurazione del firewall!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Hai già configurato un firewall.\n"
-"Clicca su Configura per modificare o rimuovere il firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Clicca su Configura per configurare un firewall standard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Scegli la lingua"
-
-# there is no room to put "Scegli classe d'installazione"
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Classe d'installazione"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Ricerca del disco fisso"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configura mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Scegli la tastiera"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sicurezza"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Configura il filesystem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatta partizioni"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pacchetti da installare"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installa sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Aggiungi un utente"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configura rete"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configura servizi"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installa bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crea disco di boot"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configura X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installa aggiornamenti di sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Termina installazione"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuratore di firewall minimo\n"
-"\n"
-"Configurazione di un firewall personale per questo sistema Mandrake Linux.\n"
-"Per una soluzione firewall potente e dedicata, per favore rivolgiti\n"
-"alla distribuzione specializzata MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Adesso ti faremo domande riguardo i servizi che vuoi rendere disponibili\n"
-"durante la connessione a Internet. Rifletti bene prima di rispondere,\n"
-"perché la sicurezza del tuo computer è molto importante.\n"
-"\n"
-"Se attualmente non sfrutti qualcuno di questi servizi, ti invitiamo a\n"
-"disabilitarlo. Potrai cambiare queste impostazioni quando vorrai\n"
-"usando di nuovo questa applicazione!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server web che deve essere visibile\n"
-"da Internet? Se si accede a tale server web soltanto da questa macchina\n"
-"puoi rispondere NO tranquillamente.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server dei nomi? Se non ne hai\n"
-"configurato uno per trasmettere informazioni su IP e domini all'intera\n"
-"Internet, per favore rispondi NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Vuoi accettare delle connessioni Secure Shell (ssh) in ingresso? ssh\n"
-"può essere usato al posto di telnet per effettuare il login. Se adesso\n"
-"stai usando telnet, ti consigliamo di passare a ssh: telnet non effettua\n"
-"la cifratura dei dati, pertanto qualche pirata potrebbe intercettare\n"
-"la tua password. Invece ssh effettua la cifratura e non permette che\n"
-"qualcuno origli alle tue spalle."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vuoi accettare delle connessioni telnet in ingresso?\n"
-"Come vi abbiamo spiegato prima, è un metodo terribilmente insicuro.\n"
-"Ti consigliamo caldamente di rispondere NO in questo caso, e di\n"
-"usare ssh invece di telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server FTP che deve essere reso\n"
-"accessibile via Internet? In tal caso, ti consigliamo vivamente di\n"
-"usarlo soltanto per collegamenti di tipo Anonimo. Qualsiasi password\n"
-"inviata con FTP può essere intercettata da qualche cracker, dato che\n"
-"anche FTP non fa uso di cifratura nel trasmettere le password.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server di posta elettronica? Se\n"
-"inviate messaggi per mezzo di pine, mutt o altri programmi di posta\n"
-"basati su interfaccia a caratteri, allora probabilmente sì. Altrimenti\n"
-"dovreste nasconderlo dietro il firewall.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Su questa macchina è in esecuzione un server POP o IMAP? Questi\n"
-"vengono usati per le necessità di utenti che hanno account di posta\n"
-"(non basata su interfaccia web) su questa macchina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Apparentemente usi un kernel della serie 2.2. Se il tuo IP di\n"
-"rete è stabilito automaticamente da un computer connesso con\n"
-"questo (assegnazione dinamica), dobbiamo specificare questa\n"
-"impostazione. Il tuo indirizzo IP è assegnato dinamicamente?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"L'orologio di questo computer viene sincronizzato sulla base di\n"
-"un altro? Per lo più questo si verifica in organizzazioni che fanno\n"
-"uso di Unix/Linux di dimensioni medio-grandi, allo scopo di avere\n"
-"dei log di sistema sincronizzati e simili. Se non fai parte di una\n"
-"rete più grande e non hai mai sentito parlare di qualcosa del genere,\n"
-"probabilmente puoi rispondere NO."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configurazione completa. Possiamo scrivere le modifiche su disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Non riesco ad aprire %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Non riesco ad aprire %s in scrittura: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "No, il DHCP non mi serve"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Sì, ho bisogno del DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "No, il NTP non mi serve"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Sì, ho bisogno del NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Non salvare"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Salva ed Esci"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Assistente di configurazione del firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "No (usa un firewall per schermarlo da Internet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Sì (lascia che passi attraverso il firewall)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Per favore attendere... Sto verificando i pacchetti installati"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Non ho potuto installare i pacchetti richiesti: %s e Bastille.\n"
-"Provate a installarli manualmente."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computer connesso alla rete (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Server NFS, server SMB, server proxy, server SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Workstation grafica con GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Utilità per il tuo Palm Pilot o Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Workstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Server di nomi di dominio (DNS) e informazioni sulla rete"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmi Office: wordprocessor (kword, abiword), fogli elettronici "
-"(kspread, gnumeric), visualizzatori pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Utilità audio: riproduttori mp3 o midi, mixer, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libri e Howto su Linux e il software libero"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Workstation grafica con KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Set di utilità per posta, news, web, file transfer, e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Server di database PostgreSQL o MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Strumenti per semplificare la configurazione del computer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Suono"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Programmi di utilità"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentazione"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Programmi da linea di comando"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server di posta Postfix, server di news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Computer con accesso a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Computer multimediale"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configurazione"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Altri desktop grafici (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Il K Desktop Environment, l'ambiente grafico di base con una collezione di "
-"utilità che lo accompagnano"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente grafico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Utilità per creare e masterizzare CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Postazione di lavoro con programmi Office"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmi grafici come The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Librerie di sviluppo, programmi e file include per C e C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Server di rete"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Posta/Groupware/Newsgroup"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Computer predisposto per i giochi"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Riproduttori video e programmi di editing"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafica"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programmi di svago: azione, da tavolo, strategia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Gruppo di programmi per leggere e inviare posta e news (pine, mutt, tin..) e "
-"per navigare il Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiviazione, emulatori, monitoraggio"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanza Personale"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un ambiente grafico con un set di applicazioni user-friendly e utilità per "
-"il desktop"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clienti per vari protocolli, incluso ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gateway per Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmi di riproduzione/modifica audio e video"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Altri desktop grafici"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editor, shell, programmi di utilità riguardo i file, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmi per gestire le tue finanze, come gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestione di informazioni personali"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Masterizzazione CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Workstation scientifica"
diff --git a/perl-install/share/po/ja.po b/perl-install/share/po/ja.po
deleted file mode 100644
index 6a886fa7d..000000000
--- a/perl-install/share/po/ja.po
+++ /dev/null
@@ -1,15415 +0,0 @@
-# DrakX Japanese Translation.
-# ¡Ö¡×¡È¡É
-# for Japanese text use ¡Ö and ¡× instead of ugly \" and \"
-# for ascii text in the transltion you can also use¡È and ¡É
-# also, even if the English text has no lineabreak ( \n ) at
-# all, you must add some if the Japanese text is too long,
-# because the current toolkits are unable to wordwrap Japanese
-# text due to the lack of word delimiters. 
-#
-# Copyright (c) 1999 MandrakeSoft
-# Junichi Kimura <jun@kde.gr.jp>, 1999-2000
-# YAMAGATA Hiroo <hiyori13@alum.mit.edu>, 1999-2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-12-10 16:27+0100\n"
-"Last-Translator: YAMAGATA Hiroo <hiyori13@alum.mit.edu>\n"
-"Language-Team: Japanese\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=euc-jp\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "¥Ø¥Ã¥É¤ò¤½¤ì¤¾¤ìÆÈΩ¤ËÀßÄê"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama ³ÈÄ¥¤ò»È¤¦"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "°Ê²¼¤Î¥«¡¼¥É¤À¤±¤òÀßÄꡧ ¡È%s¡É(%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "¥Þ¥ë¥Á¥Ø¥Ã¥ÉÀßÄê"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥·¥¹¥Æ¥à¤Ï¥Þ¥ë¥Á¥Ø¥Ã¥É¤ÎÀßÄ꤬¤Ç¤­¤Þ¤¹¡£\n"
-"¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤òÁªÂò¤·¤Æ²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "X ¥µ¡¼¥Ð¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ¥µ¡¼¥Ð"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "X ¥É¥é¥¤¥Ð¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X ¥É¥é¥¤¥Ð"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¤É¤Î¹½À®¤ÎXFree ¤Ë¤·¤Þ¤¹¤«"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"¤³¤Î¥«¡¼¥É¤ÏXFree %s ¤Ç¤Î¤ß3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó²Äǽ¤Ç¤¹¡£\n"
-"XFree %s ¤Ç¤Î¤³¤Î¥«¡¼¥É¤Î¥µ¥Ý¡¼¥È¤Ï¡¢2D ¤Î¤Û¤¦¤¬¤¹¤°¤ì¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "¤³¤Î¥«¡¼¥É¤ÏXFree %s ¤Ç3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó²Äǽ¤Ç¤¹¡£"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "¥Ï¡¼¥É¥¦¥§¥¢3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó¤Ä¤­¤ÎXFree %s"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"¤³¤Î¥«¡¼¥É¤ÏXFree %s ¤Ç3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó²Äǽ¤Ç¤¹¡£\n"
-"¤¿¤À¤·¤¢¤¯¤Þ¤Ç¡¢¼Â¸³Åª¤Ê¥µ¥Ý¡¼¥È¤Ç¡¢¥Þ¥·¥ó¥Õ¥ê¡¼¥º¤Î²ÄǽÀ­¤¬¤¢¤ê¤Þ¤¹¡£"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "¼Â¸³Ãʳ¬¤Î¥Ï¡¼¥É¥¦¥§¥¢3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó¤Ä¤­¤ÎXFree %s"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"¤³¤Î¥«¡¼¥É¤Ï¥Ï¡¼¥É3D¥¢¥¯¥»¥é¥ì¡¼¥·¥ç¥ó¤¬²Äǽ¤Ç¤¹¤¬¡¢XFree %s¤¬É¬ÍפǤ¹¡£\n"
-"¤¿¤À¤·¤¢¤¯¤Þ¤Ç¡¢¼Â¸³Åª¤Ê¥µ¥Ý¡¼¥È¤Ç¡¢¥Þ¥·¥ó¥Õ¥ê¡¼¥º¤Î²ÄǽÀ­¤¬¤¢¤ê¤Þ¤¹¡£\n"
-"XFree %s ¤Ç¤Î¤³¤Î¥«¡¼¥É¤Î¥µ¥Ý¡¼¥È¤Ï¡¢2D ¤Î¤Û¤¦¤¬¤¹¤°¤ì¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (¥¤¥ó¥¹¥È¡¼¥ë¥Ç¥£¥¹¥×¥ì¥¤¥É¥é¥¤¥Ð)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree¤ÎÀßÄê"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤Î¥á¥â¥ê¥µ¥¤¥º¤òÁªÂò¤·¤Æ²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "¥µ¡¼¥Ð¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "¥â¥Ë¥¿¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "¥â¥Ë¥¿"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Âç»ö¤Ê¥Ñ¥é¥á¡¼¥¿¤¬2¤Ä¤¢¤ê¤Þ¤¹¡£¿âľ¥ê¥Õ¥ì¥Ã¥·¥å¥ì¡¼¥È(¥¹¥¯¥ê¡¼¥óÁ´ÂÎ\n"
-"¤òºÆÉÁ²è¤¹¤ë¼þ´ü)¤È¿åÊ¿¥ê¥Õ¥ì¥Ã¥·¥å¥ì¡¼¥È(ÁöººÀþ¤Îɽ¼¨¼þ´ü¡¤¤â¤Ã¤È¤â\n"
-"½ÅÍ×)¤Ç¤¹¡£\n"
-"\n"
-"*½ÅÍ×* ¥â¥Ë¥¿¤ÎµöÍÆÈÏ°ÏÆâ¤Î¿âľ¡¤¿åʿƱ´üÈϰϤò»ØÄꤷ¤Ê¤¤¤È¡¤\n"
-"¥â¥Ë¥¿¤¬¥À¥á¡¼¥¸¤ò¼õ¤±¤ë¤«¤âÃΤì¤Þ¤»¤ó¡£\n"
-"ʬ¤«¤é¤Ê¤¤¾ì¹ç¤Ï, Äã¤á¤ÎÀßÄê¤Ë¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "¿åÊ¿¥ê¥Õ¥ì¥Ã¥·¥å¥ì¡¼¥È"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "¿âľ¥ê¥Õ¥ì¥Ã¥·¥å¥ì¡¼¥È"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "¥â¥Ë¥¿¤¬ÀßÄꤵ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤¬ÀßÄꤵ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "²òÁüÅÙ¤¬ÁªÂò¤µ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "¤³¤ÎÀßÄê¤Ç»î¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"·Ù¹ð¡§¤³¤Î¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤ò¥Æ¥¹¥È¤¹¤ë¤È¥Þ¥·¥ó¤¬¥Õ¥ê¡¼¥º¤¹¤ë¤«¤â¤·¤ì¤Þ¤»¤ó"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "ÀßÄê¤ò»î¤·¤Þ¤¹"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"¤¤¤¯¤Ä¤«¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤Æ¤ß¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "¥¨¥é¡¼È¯À¸"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "¤¢¤È %d ÉäÇÌá¤ê¤Þ¤¹"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "ÀßÄê¤Ï¤³¤ì¤Ç¤¤¤¤¤Ç¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "¥¨¥é¡¼È¯À¸¡¤¤¤¤¯¤Ä¤«¤Î¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤Æ¤ß¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "²òÁüÅÙ"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "²òÁüÅ٤ȿ§¿¼ÅÙ"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ¥µ¡¼¥Ð: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "¼¡"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Á´¤Æ¤òɽ¼¨"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "²òÁüÅÙ"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "¥Þ¥¦¥¹¤Î¼ïÎà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "¥Þ¥¦¥¹¥Ç¥Ð¥¤¥¹: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¥â¥Ë¥¿: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "¥â¥Ë¥¿¿åʿƱ´ü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "¥â¥Ë¥¿¿âľ¥ê¥Õ¥ì¥Ã¥·¥å: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É id: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥á¥â¥ê: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "¿§¿¼ÅÙ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "²òÁüÅÙ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ¥µ¡¼¥Ð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ¥É¥é¥¤¥Ð: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X Window System ¤ÎÀßÄê¤Î½àÈ÷"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "¥â¥Ë¥¿¤ÎÊѹ¹"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥«¡¼¥É¤ÎÊѹ¹"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "¥µ¡¼¥Ð¥ª¥×¥·¥ç¥ó¤ÎÊѹ¹"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "²òÁüÅÙ¤ÎÊѹ¹"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "¾ðÊó¤òɽ¼¨"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "¤â¤¦°ì²ó¥Æ¥¹¥È"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "½ªÎ»"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Êѹ¹¤òÊݸ¤·¤Þ¤¹¤«?\n"
-"¸½ºß¤ÎÀßÄê¤Ï°Ê²¼¤ÎÄ̤ê¤Ç¤¹:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ¤Îµ¯Æ°"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"¥³¥ó¥Ô¥å¡¼¥¿¤ò¥Ö¡¼¥È¤·¤¿»þ¡¤¼«Æ°Åª¤Ë X ¤¬Î©¤Á¾å¤¬¤ëÀßÄê¤Ë¤Ç¤­¤Þ¤¹¡£\n"
-"¥ê¥Ö¡¼¥È¤·¤¿»þ X ¤òΩ¤Á¾å¤²¤Þ¤¹¤«¡©"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Êѹ¹¤òÍ­¸ú¤Ë¤¹¤ë¤Ë¤Ï %s ¤Ë¥í¥°¥¤¥ó¤·¤Ê¤ª¤·¤Æ²¼¤µ¤¤"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "¥í¥°¥¢¥¦¥È¤·¤¿¾å¤Ç Ctrl-Alt-BackSpace ¤ò²¡¤·¤Æ²¼¤µ¤¤"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ¿§(8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3Ëü2À鿧 (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6Ëü5À鿧 (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "1600Ëü¿§ (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "40²¯¿§ (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB °Ê¾å"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "¥¹¥¿¥ó¥À¡¼¥É VGA, 640x480 ¤Ç 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "¥¹¡¼¥Ñ¡¼ VGA, 800x600 ¤Ç 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ¸ß´¹, 1024x768 at 87 Hz ¥¤¥ó¥¿¡¼¥ì¡¼¥¹ (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "¥¹¡¼¥Ñ¡¼ VGA, 1024x768 ¤Ç 87 Hz ¥¤¥ó¥¿¡¼¥ì¡¼¥¹, 800x600 ¤Ç 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "³ÈÄ¥ ¥¹¡¼¥Ñ¡¼ VGA, 800x600 ¤Ç 60 Hz, 640x480 ¤Ç 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "1024x768 at 60 Hz, 800x600 at 72 Hz¤Î¥Î¥ó¥¤¥ó¥¿¡¼¥ì¥¹SVGA"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "1280x1024 at 70 Hz¤ÎHigh Frequency SVGA"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 at 60 Hz¤¬²Äǽ¤Ê¥Þ¥ë¥Á¥¹¥­¥ã¥ó¥â¥Ë¥¿"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 at 74 Hz¤¬²Äǽ¤Ê¥Þ¥ë¥Á¥¹¥­¥ã¥ó¥â¥Ë¥¿"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 at 76 Hz¤¬²Äǽ¤Ê¥Þ¥ë¥Á¥¹¥­¥ã¥ó¥â¥Ë¥¿"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 at 70 Hz ¤¬²Äǽ¤Ê¥â¥Ë¥¿"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 at 76 Hz ¤¬²Äǽ¤Ê¥â¥Ë¥¿"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "¥Ö¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÎºÇ½é¤Î¥»¥¯¥¿"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "¥É¥é¥¤¥Ö¤ÎºÇ½é¤Î¥»¥¯¥¿ (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO ¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤ò¤É¤³¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub ¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "¥Æ¥­¥¹¥È¥á¥Ë¥å¡¼ÈÇ LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯¥á¥Ë¥å¡¼ÈÇ LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Windows¤«¤éµ¯Æ° (loadlin »ÈÍÑ)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Î¥á¥¤¥ó¥ª¥×¥·¥ç¥ó"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "»ÈÍѤ¹¤ë¥Ö¡¼¥È¥í¡¼¥À"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "¥Ö¡¼¥È¥Ç¥Ð¥¤¥¹"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (¸Å¤¤ BIOS ¤Ç¤ÏÆ°¤«¤Ê¤¤)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "¥³¥ó¥Ñ¥¯¥È"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "¥³¥ó¥Ñ¥¯¥È"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "¥Ó¥Ç¥ª¥â¡¼¥É"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "¥Ç¥Õ¥©¥ë¥È¥¤¥á¡¼¥¸µ¯Æ°¤ÎÂÔ¤Á»þ´Ö"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "¥Ñ¥¹¥ï¡¼¥É (¤â¤¦°ìÅÙ)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "¥³¥Þ¥ó¥É¥é¥¤¥ó¥ª¥×¥·¥ç¥ó¤ÎÀ©¸Â"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "À©¸Â"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "³Æ¥Ö¡¼¥È»þ¤Ë /tmp °Ê²¼¤ò¾Ã¤¹"
-
-# added a \n to the translation to avoid that the dialog window
-# in which it appears to be tooooo laaaaarge
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-"ɬÍפʤéÀµ³Î¤ÊRAM¥µ¥¤¥º¤òÆþ¤ì¤Æ¤¯¤À¤µ¤¤\n"
-"¡Ê%d MB¤¬¸«¤Ä¤«¤ê¤Þ¤·¤¿¡Ë"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "¥Þ¥ë¥Á¥×¥í¥Õ¥¡¥¤¥ë¤òÍ­¸ú¤Ë"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Ram¥µ¥¤¥º¤òMB¤ÇÆþÎÏ"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"¡È¥³¥Þ¥ó¥É¥é¥¤¥ó¥ª¥×¥·¥ç¥ó¤ÎÀ©¸Â¡É¥ª¥×¥·¥ç¥ó¤Ï¥Ñ¥¹¥ï¡¼¥É¤¬¤Ê¤¤¤È\n"
-"Ìò¤Ë¤¿¤Á¤Þ¤»¤ó¡£"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "¤â¤¦°ìÅٻ¤Æ²¼¤µ¤¤"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤¬°ìÃפ·¤Þ¤»¤ó"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "½é´ü²½¥á¥Ã¥»¡¼¥¸"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢¤Î¥Ç¥£¥ì¥¤"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "¥«¡¼¥Í¥ë¥Ö¡¼¥È¤Î¥¿¥¤¥à¥¢¥¦¥È"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD ¤«¤é¤Îµ¯Æ°¤òÍ­¸ú¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF ¤«¤é¤Îµ¯Æ°¤òÍ­¸ú¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "¥Ç¥Õ¥©¥ë¥È¤Î OS ¤Ï¡©"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"¥¨¥ó¥È¥ê¤Ï°Ê²¼¤Î¤È¤ª¤ê¤Ç¤¹¡£\n"
-"Äɲá¦Êѹ¹¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "²Ã¤¨¤ë"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "½ªÎ»"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Êѹ¹"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "¤É¤Î¥¿¥¤¥×¤òÄɲä·¤Þ¤¹¤«"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "¾¤Î OS (SunOS¤Ê¤É...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "¾¤Î OS (MacOS¤Ê¤É...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "¾¤Î OS (¥¦¥£¥ó¥É¥¦¥º¤Ê¤É...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "¥¤¥á¡¼¥¸"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "¥ë¡¼¥È"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "ÄɲÃ"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Æɤ߽ñ¤­"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "¥Æ¡¼¥Ö¥ë"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "´í¸±"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "¥é¥Ù¥ë"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "¥Ç¥Õ¥©¥ë¥È"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd¥µ¥¤¥º"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "¥Ó¥Ç¥ª¤Ê¤·"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "¥¨¥ó¥È¥ê¤ò¾Ã¤¹"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "¶õÇò¤Î¥é¥Ù¥ë¤Ïµö¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "¥«¡¼¥Í¥ë¥¤¥á¡¼¥¸¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "root¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ïɬ¤º»ØÄꤷ¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "¤³¤Î¥é¥Ù¥ë¤Ï¤¹¤Ç¤Ë»È¤ï¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤¬¸«¤Ä¤«¤ê¤Þ¤·¤¿"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Ê̤Τâ¤Î¤Ï¤¢¤ê¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "%s ¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤Ï¤¢¤ê¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "¤¤¤¤¤¨"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "¤Ï¤¤"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "¥Ï¡¼¥É¥¦¥§¥¢¤Î¾ðÊó¤ò¸«¤Æ²¼¤µ¤¤"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s ¥«¡¼¥É %s ¤Î¥É¥é¥¤¥Ð¥¤¥ó¥¹¥È¡¼¥ëÃæ"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(¥â¥¸¥å¡¼¥ë %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¤É¤Î %s ¥É¥é¥¤¥Ð¤ò»î¤·¤Þ¤·¤ç¤¦¤«¡©"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"%s ¥É¥é¥¤¥Ð¤Ï¡¢Àµ¤·¤¯Æ°ºî¤¹¤ë¤Î¤ËÆÃÊ̤ʾðÊó¤¬Íפë¾ì¹ç¤¬¤¢¤ê¤Þ¤¹¡£¤¿¤À¤·\n"
-"¤Õ¤Ä¤¦¤Ï¡¢¤Ê¤Ë¤â¤Ê¤·¤ÇÀµ¾ï¤ËÆ°¤¯¾ì¹ç¤¬¤Û¤È¤ó¤É¤Ç¤¹¡£ÆÃÊ̤ʥª¥×¥·¥ç¥ó¤ò\n"
-"»ØÄꤷ¤Þ¤¹¤«¡©¡¡¤½¤ì¤È¤â¥É¥é¥¤¥Ð¤Ë¥Þ¥·¥ó¤ò¥×¥í¡¼¥Ö¤µ¤»¤ÆɬÍ×¾ðÊó¤ò¼èÆÀ\n"
-"¤µ¤»¤Æ¤ß¤Þ¤¹¤«¡©¡¡¥×¥í¡¼¥ÖÃæ¤Ë¥³¥ó¥Ô¥å¡¼¥¿¤¬Ää»ß¤¹¤ë¤«¤âÃΤì¤Þ¤»¤ó¤¬¡¤\n"
-"¥Þ¥·¥ó¤¬¤³¤ï¤ì¤¿¤ê¤¹¤ë¤³¤È¤Ï¤¢¤ê¤Þ¤»¤ó¡£"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "¥ª¡¼¥È¥×¥í¡¼¥Ö"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "¥ª¥×¥·¥ç¥ó»ØÄê"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"¤Ç¤Ï¥â¥¸¥å¡¼¥ë %s ¤Î¥ª¥×¥·¥ç¥ó¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤Ê¤ª¡¢¥¢¥É¥ì¥¹¤Ï¤¹¤Ù¤Æ¡¢Æ¬¤Ë 0x ¤ò¤Ä¤±¤ÆÆþÎϤ¹¤ë¤³¤È¡£Î㡧 '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"¥â¥¸¥å¡¼¥ë %s ¤Ø¤Î¥ª¥×¥·¥ç¥ó¤Î»ØÄê¡£\n"
-"¥ª¥×¥·¥ç¥ó¤Î¥Õ¥©¡¼¥Þ¥Ã¥È¤Ï¡È̾Á°=ÃÍ Ì¾Á°2=ÃÍ2 ...¡É¤Ç¤¹¡£\n"
-"Îã: ¡Èio=0x300 irq=7¡É"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "¥â¥¸¥å¡¼¥ë¤Î¥ª¥×¥·¥ç¥ó"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"¥â¥¸¥å¡¼¥ë %s ¤Î¥í¡¼¥É¤¬¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-"¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤Æ¤ä¤ê¤Ê¤ª¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "X ¥×¥í¥°¥é¥à¤Ø¤Î¥¢¥¯¥»¥¹"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "rpm ¥Ä¡¼¥ë¤Ø¤Î¥¢¥¯¥»¥¹"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "¡Èsu¡É¤òµö¤¹"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "´ÉÍý¥Õ¥¡¥¤¥ë¤Ø¤Î¥¢¥¯¥»¥¹"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ¤ÏÄɲúѤß)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤¬´Êñ¤¹¤®¤Þ¤¹"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "¥æ¡¼¥¶Ì¾¤òÍ¿¤¨¤Æ²¼¤µ¤¤"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "¥æ¡¼¥¶Ì¾¤Ë¤Ï±Ñ¾®Ê¸»ú¡¤¿ô»ú¡¢¡Ö-¡×¤ä¡Ö_¡×¤·¤«»È¤¨¤Þ¤»¤ó¡£"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "¤³¤Î¥æ¡¼¥¶Ì¾¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "¥æ¡¼¥¶¤òÄɲÃ"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"¥æ¡¼¥¶Ì¾¤òÆþÎϤ·¤Æ²¼¤µ¤¤\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "¼õ¤±ÉÕ¤±¤ë¥æ¡¼¥¶"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "¼ÂºÝ¤Î»á̾"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "¥æ¡¼¥¶Ì¾"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "¥·¥§¥ë"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "¥¢¥¤¥³¥ó"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "¼«Æ°¥í¥°¥¤¥ó"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"¼«Æ°Åª¤ËÆÃÄê¥æ¡¼¥¶¤¬¥í¥°¥ª¥ó¤¹¤ë¤è¤¦¤Ë¥³¥ó¥Ô¥å¡¼¥¿¤òÀßÄê¤Ç¤­¤Þ¤¹¡£\n"
-"¤³¤Îµ¡Ç½¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "¥Ç¥Õ¥©¥ë¥È¥æ¡¼¥¶¤ÎÁªÂò:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "»È¤¦¥¦¥£¥ó¥É¥¦¥Þ¥Í¡¼¥¸¥ã¤òÁª¤ó¤Ç²¼¤µ¤¤¡§"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "¤É¤Î¸À¸ì¤ò»È¤¦¤«Áª¤ó¤Ç¤¯¤À¤µ¤¤¤Í¡£"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¸å»ÈÍѲÄǽ¤Ë¤Ê¤ë¤Û¤«¤Î¸À¸ì¤òÁªÂò¤Ç¤­¤Þ¤¹"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "¤¼¤ó¤Ö"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "¤¹¤Ù¤Æ¤Î¥æ¡¼¥¶¤òǧ¤á¤ë"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "¥«¥¹¥¿¥à"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "¥Õ¥¡¥¤¥ë¶¦Í­¤·¤Ê¤¤"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ %s ¤¬É¬ÍפǤ¹¡£¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "¥¨¥¯¥¹¥Ý¡¼¥È¤Ë¤Ï NFS ¤« Samba ¤¬»È¤¨¤Þ¤¹¡£¤É¤Á¤é¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "ɬÍץѥ屡¼¥¸ %s ¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "¥­¥ã¥ó¥»¥ë"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "userdrake ¤òµ¯Æ°"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"¥æ¡¼¥¶Ëè¤Î¶¦Í­¤Ï¡¢¡Èfileshare¡É¥°¥ë¡¼¥×¤ò»È¤¤¤Þ¤¹¡£\n"
-"¤³¤Î¥°¥ë¡¼¥×¤Ë¥æ¡¼¥¶¤òÄɲ乤ë¤Ë¤Ï¡¢userdrake ¤¬»È¤¨¤Þ¤¹¤è¡£"
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "°­¼Á¤Ê¥¯¥é¥Ã¥«¡¼Íͤ⿯Æþ¤·¤Û¤¦¤À¤¤"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "¤­¤ï¤á¤ÆÄ㤤"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "ɸ½à"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "¹â¤¤"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "¤â¤Ã¤È¹â¤¤"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "¿À·Ð¼Á¤Ê¤Û¤É¹â¿å½à"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"¤³¤Î¥ì¥Ù¥ë¤ò»È¤¦¤Ê¤éÃí°Õ¤¬É¬ÍפǤ¹¡£¥·¥¹¥Æ¥à¤ò»È¤¦¤Î¤Ï´Êñ¤Ë¤Ê¤ê¤Þ¤¹¤¬¡¢\n"
-"¤À¤ì¤Ë¤Ç¤â¥¢¥¯¥»¥¹¤Ç¤­¤Æ¤·¤Þ¤¤¤Þ¤¹¡£Â¾¤Î¥Þ¥·¥ó¤ä¥¤¥ó¥¿¡¼¥Í¥Ã¥È\n"
-"¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥Þ¥·¥ó¤Ç¤Ï»È¤ï¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡£¥Ñ¥¹¥ï¡¼¥ÉÀ©¸Â¤â¤¢¤ê¤Þ¤»¤ó¡£"
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"¥Ñ¥¹¥ï¡¼¥É¤¬Í­¸ú¤Ë¤Ê¤ê¤Þ¤·¤¿¤¬¡¢¥Í¥Ã¥È¥ï¡¼¥¯¤Ë¤Ä¤Ê¤°¤Î¤Ï¤Þ¤À\n"
-"¤ª¾©¤á¤Ç¤­¤Þ¤»¤ó¡£"
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"¤³¤ì¤Ïɸ½à¤Î¥»¥­¥å¥ê¥Æ¥£¤Ç¡¢¥¯¥é¥¤¥¢¥ó¥È¤È¤·¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¹¤ë¥Þ¥·¥ó¤Ç"
-"¤Î¿ä¾©¥ì¥Ù¥ë¤Ç¤¹¡£"
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr "¤¹¤Ç¤ËÀ©¸Â¤¬¤«¤«¤Ã¤Æ¤¤¤Æ¡¢¤µ¤é¤ËËèÈÕ¼«Æ°¥Á¥§¥Ã¥¯¤¬¤â¤Ã¤È¤«¤«¤ê¤Þ¤¹¡£"
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"¤³¤Î¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤À¤È¡¢¥·¥¹¥Æ¥à¤ò¥µ¡¼¥Ð¤È¤·¤Æ»È¤¨¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"¿¿ô¤Î¥¯¥é¥¤¥¢¥ó¥È¤«¤éÀܳ¤ò¼õ¤±¤ë¥µ¡¼¥Ð¤È¤·¤Æ¤â»È¤¨¤ë¤À¤±¤Î¥»¥­¥å¥ê¥Æ¥£\n"
-"¿å½à¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£Ã𡧤¢¤Ê¤¿¤Î¥Þ¥·¥ó¤¬¥¤¥ó¥¿¡¼¥Í¥Ã¥È¾å¤Î¥¯¥é¥¤¥¢¥ó¥ÈÀìÍѤÊ"
-"¤é¡¢¤â¤Ã¤ÈÄ㤤¥ì¥Ù¥ë¤òÁª¤ó¤À¤Û¤¦¤¬¤¤¤¤¤Ç¤¹¤è¡£"
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Á°¤Î¥ì¥Ù¥ë¤Ë´ð¤Å¤¤¤Æ¤¤¤Þ¤¹¤¬¡¢¤³¤ì¤Ç¥·¥¹¥Æ¥à¤Ï´°Á´¤Ë¤È¤¸¤¿¾õÂÖ\n"
-"¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£¥»¥­¥å¥ê¥Æ¥£¤ÏºÇÂç¤Ç¤¹¡£"
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "¥»¥­¥å¥ê¥Æ¥£¤Î¿å½à¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "¥»¥­¥å¥ê¥Æ¥£¿å½à"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "¥µ¡¼¥Ð¤Ëlibsafe¤ò»È¤¦"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"¥Ð¥Ã¥Õ¥¡¥ª¡¼¥Ð¡¼¥Õ¥í¡¼¤ä¥Õ¥©¡¼¥Þ¥Ã¥È¥¹¥È¥ê¥ó¥°¹¶·â¤òËɸ椹¤ë¥é¥¤¥Ö¥é¥ê¡£"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s operating system chooser-he youkosou!\n"
-"\n"
-"Ichiran kara erande <ENTER> wo oshimasu. %d byou de Default ni narimasu.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "GRUB operating system chooser-he youkosou!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c, %c key wo tukatte entry wo shitei shite kudasai."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Kono OS wo kidou suru nara Enter, Kidou mae no jikkou command"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "no henshuu niha 'e', command line nara 'c' wo oshi masu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Sentaku shita OS ga %d byou de jidoutekini kidou shimasu."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot ¤ÎÍÆÎÌÉÔ­¤Ç¤¹"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "¥Ç¥¹¥¯¥È¥Ã¥×"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "¥¹¥¿¡¼¥È¥á¥Ë¥å¡¼"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Ï %s ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "¥Ø¥ë¥×¤Ï¤Þ¤À¼ÂÁõ¤µ¤ì¤Æ¤¤¤Þ¤»¤ó¡£\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "µ¯Æ°Êý¼°¤ÎÀßÄê"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/¥Õ¥¡¥¤¥ë(F)"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/¥Õ¥¡¥¤¥ë(F)/½ªÎ»(Q)"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "¿·¥¹¥¿¥¤¥ë¤ËʬÎव¤ì¤ë¥â¥Ë¥¿"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "¿·¥¹¥¿¥¤¥ë¥â¥Ë¥¿"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "¤Õ¤Ä¤¦¤Î¥â¥Ë¥¿"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "¤Õ¤Ä¤¦¤Î Gtk+ ¥â¥Ë¥¿"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "µ¯Æ°»þ¤ËAurora¤ò¼Â¹Ô"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub ¥â¡¼¥É"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot ¥â¡¼¥É"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"¤¤¤Þ¡¢¥Ö¡¼¥È¥Þ¥Í¡¼¥¸¥ã¤Ë¤Ï %s ¤ò¤ª»È¤¤¤Ç¤¹¡£\n"
-"ÀßÄꥦ¥£¥¶¡¼¥É¤òµ¯Æ°¤¹¤ë¤Ë¤Ï¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "ÀßÄê"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "¥·¥¹¥Æ¥à¥â¡¼¥É"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "µ¯Æ°»þ¤Ë X ¥¦¥£¥ó¥É¥¦¤ò¼Â¹Ô"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "¼«Æ°¥í¥°¥¤¥ó¤Ï¤·¤Ê¤¤"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "¤³¤Î (¥æ¡¼¥¶¡¢¥Ç¥¹¥¯¥È¥Ã¥×¡Ë¤Ç¼«Æ°¥í¥°¥¤¥ó¤¹¤ë"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab ¤¬ÆɤߤȤêÍѤ˳«¤±¤Þ¤»¤ó: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "¤¢¤È %d ʬ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "¤¢¤È 1 ʬ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "¤¢¤È %d ÉÃ"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÄɲ乤ë¤Þ¤Ç¥¹¥¯¥ê¡¼¥ó¥·¥ç¥Ã¥È¤Ï»£¤ì¤Þ¤»¤ó"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "%s ¤Î¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ë¥¹¥¯¥ê¡¼¥ó¥·¥ç¥Ã¥È¤¬²Äǽ¤Ç¤¹"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "¥Õ¥é¥ó¥¹"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "¥³¥¹¥¿¥ê¥«"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "¥Ù¥ë¥®¡¼"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "¥Á¥§¥³¶¦Ï¹ñ"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "¥É¥¤¥Ä"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "¥®¥ê¥·¥ã"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "¥Î¥ë¥¦¥§¡¼"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "¥¹¥¦¥§¡¼¥Ç¥ó"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "¥ª¥é¥ó¥À"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "¥¤¥¿¥ê¥¢"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "¥ª¡¼¥¹¥È¥ê¥¢"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "¥¢¥á¥ê¥«¹ç½°¹ñ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "¥Ç¡¼¥¿¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤ò¼è¤Ã¤Æ²¼¤µ¤¤"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "¤è¤¯Æɤó¤Ç²¼¤µ¤¤¡ª"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"¤â¤· aboot ¤ò»È¤¦¤Ä¤â¤ê¤Ê¤é¡¢¥Ç¥£¥¹¥¯¤ÎÀèƬ¤Ë¶õ¤­Îΰè (2048¥»¥¯¥¿¤¯¤é¤¤)\n"
-"¤ò»Ä¤¹¤è¤¦µ¤¤òÉÕ¤±¤Æ²¼¤µ¤¤¡£"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "¥¨¥é¡¼"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "¥¦¥£¥¶¡¼¥É"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Æ°ºî¤òÁªÂò"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"¥Ï¡¼¥É¥Ç¥£¥¹¥¯Á´ÂΤ¬Â礭¤Ê FAT ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó°ì¤Ä¤À¤±¤Ç¤¹¤Í\n"
-"¡Ê¤¿¤Ö¤óMS Dos/¥¦¥£¥ó¥É¥¦¥º¤Î¤â¤Î¤Ç¤¹¡Ë¡£\n"
-"¤Þ¤º¤Ï¤³¤¤¤Ä¤ò¥ê¥µ¥¤¥º¤¹¤ë¤Î¤¬¤¤¤¤¤Ç¤·¤ç¤¦\n"
-"¡Ê¤½¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¡¢¼¡¤Ë¡Ö¥ê¥µ¥¤¥º¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ²¼¤µ¤¤)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Êѹ¹¤¹¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "¾ÜºÙ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "¥¸¥ã¡¼¥Ê¥ê¥ó¥°¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "¥¹¥ï¥Ã¥×"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "¶õ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "¤½¤Î¾"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à ¥¿¥¤¥×:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "ºîÀ®"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "¥¿¥¤¥×"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âå¤ï¤ê¤Ë¡È%s¡É¤ò»È¤Ã¤Æ²¼¤µ¤¤"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "ºï½ü"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "ºÇ½é¤Ë¡Ö¥¢¥ó¥Þ¥¦¥ó¥È¡×¤ò»È¤Ã¤Æ²¼¤µ¤¤"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î·¿¤ò %s ¤ËÊѹ¹¤·¤¿¸å¡¢¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¾å¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ"
-"¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁªÂò"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Ê̤Υѡ¼¥Æ¥£¥·¥ç¥ó¤òÁª¤Ö"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "½ªÎ»"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¤Ë°Ü¤ë"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "¥Î¡¼¥Þ¥ë¥â¡¼¥É¤Ë°Ü¤ë"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "¤â¤È¤ËÌ᤹"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "¤½¤ì¤Ç¤â³¤±¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "¥»¡¼¥Ö¤»¤º½ªÎ»"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò¹¹¿·¤»¤º¤Ë½ªÎ»¡©"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr " /etc/fstab ¤ÎÊѹ¹¤òÊݸ¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "¼«Æ°³ä¤êÅö¤Æ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Á´¤Æ¤ò¥¯¥ê¥¢"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "¥Ï¡¼¥É¥É¥é¥¤¥Ö¤Î¾ðÊó"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Á´¤Æ¤Î¥×¥é¥¤¥Þ¥ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬»È¤ï¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "¤³¤ì°Ê¾å¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÏÄɲäǤ­¤Þ¤»¤ó"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁý¤ä¤·¤¿¤¤¤Ê¤é¡¤³ÈÄ¥¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬\n"
-"ºî¤ì¤ë¤è¤¦¤Ë¤É¤³¤«¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾Ã¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÊݸ"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òºÆÀ¸"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò»Ä¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òºÆÆɹþ"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "¥ê¥à¡¼¥Ð¥Ö¥ë¥á¥Ç¥£¥¢¼«Æ°ºÆ¥Þ¥¦¥ó¥ÈÃæ"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "¥Õ¥¡¥¤¥ë¤òÁªÂò"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"¥Ð¥Ã¥¯¥¢¥Ã¥×¤¹¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤Î¥µ¥¤¥º¤¬°ã¤¤¤Þ¤¹\n"
-"³¤±¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "·Ù¹ð"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö¤ËÁÞÆþ¤·¤Æ¤¯¤À¤µ¤¤\n"
-"¥Õ¥í¥Ã¥Ô¡¼¾å¤ÎÁ´¤Æ¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òµß½Ð¤·¤Æ¤ß¤Þ¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "¾ÜºÙ¤Ê¾ðÊó"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "¥ª¥×¥·¥ç¥ó"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "¥ê¥µ¥¤¥º"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "°ÜÆ°"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "¥Þ¥¦¥ó¥È"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "RAID ¤Ë²Ã¤¨¤ë"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "LVM ¤Ë²Ã¤¨¤ë"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "¥¢¥ó¥Þ¥¦¥ó¥È"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "RAID ¤«¤é½ü¤¯"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LVM ¤«¤é½ü¤¯"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID¤ÎÊѹ¹"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¤Î»ÈÍÑ"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºîÀ®"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "³«»Ï¥»¥¯¥¿: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "MB ¤Ç¤Î¥µ¥¤¥º: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¥¿¥¤¥×: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "¥×¥ê¥Õ¥¡¥ì¥ó¥¹: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë¤òºï½ü¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥¿¥¤¥×¤ÎÊѹ¹"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "¤É¤Î¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ext2 ¤«¤é ext3 ¤ËÊѹ¹¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë %s ¤ò¤É¤³¤Ë¥Þ¥¦¥ó¥È¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¥Ç¥Ð¥¤¥¹ %s ¤ò¤É¤³¤Ë¥Þ¥¦¥ó¥È¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥ë¡¼¥×¥Ð¥Ã¥¯¤Ç»È¤ï¤ì¤Æ¤¤¤ë¤Î¤Ç¡¢\n"
-"¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤«¤é¼è¤ê½¢¤¯¤³¤È¤¬½ÐÍè¤Þ¤»¤ó¡£\n"
-"¤Þ¤º¥ë¡¼¥×¥Ð¥Ã¥¯¤ò²ò½ü¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "fat ¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¶­³¦¤ò·×»»"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "¥ê¥µ¥¤¥ºÃæ"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥ê¥µ¥¤¥º¤Ç¤­¤Þ¤»¤ó"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¾å¤Î¥Ç¡¼¥¿¤Ï¥Ð¥Ã¥¯¥¢¥Ã¥×¤¹¤ë¤Ù¤­¤Ç¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "¥ê¥µ¥¤¥º¸å¤Ë¤Ï¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s ¾å¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "¿·¤·¤¤¥µ¥¤¥º¤òÁªÂò"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "MB ¤Ç¤Î¥µ¥¤¥º: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "¤É¤Î¥Ç¥£¥¹¥¯¤Ë°ÜÆ°¤·¤Þ¤¹¤«?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "¥»¥¯¥¿"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "¤É¤Î¥»¥¯¥¿¤ò°ÜÆ°¤·¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "°ÜÆ°Ãæ"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò°ÜÆ°Ãæ..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Äɲ乤ë´û¸¤Î RAID ¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "¿·µ¬"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Äɲ乤ë´û¸¤Î LVM ¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ̾¤Ï¡©"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥ë¡¼¥×¥Ð¥Ã¥¯¤Ë¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë̾: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "¥Õ¥¡¥¤¥ë̾¤òÆþÎÏ"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "¥Õ¥¡¥¤¥ë¤Ï¤¹¤Ç¤ËÊ̤Υ롼¥×¥Ð¥Ã¥¯¤Ç»ÈÍÑÃ档¾¤Î¤òÁª¤Ó¤Þ¤·¤ç¤¦"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "¥Õ¥¡¥¤¥ë¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹¡£¤¤¤Þ¤¢¤ë¤Î¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "¥Þ¥¦¥ó¥È¥ª¥×¥·¥ç¥ó"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "¤½¤Î¾"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "¥Ç¥Ð¥¤¥¹"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "¥ì¥Ù¥ë"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "¥Á¥ã¥ó¥¯¥µ¥¤¥º"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Ãí°Õ: ¤³¤ÎÁàºî¤Ï´í¸±¤Ç¤¹¡£"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "¤É¤ó¤Ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ç¤¹¤«¡©"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"¤´¤á¤ó¤Ê¤µ¤¤¡¤¤½¤³¤Ï¥É¥é¥¤¥Ö¤Î¤«¤Ê¤ê±ü¤Î¤Û¤¦(¥·¥ê¥ó¥À>1024)¤Ê¤Î¤Ç\n"
-"¤½¤³¤Ë /boot ¤Ïºî¤ì¤Þ¤»¤ó¡£/boot¤¬¤½¤³¤À¤È¡¢LILO ¤¬¤¦¤Þ¤¯Æ¯¤«¤Ê¤¤¤·¡¤\n"
-"LILO ¤ò»È¤ï¤Ê¤¤¤Ê¤é /boot ¤ÏÍפê¤Þ¤»¤ó¤«¤é"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"¤¤¤Þ¥ë¡¼¥È(/)ÍѤËÁª¤ó¤À¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¤ÊªÍýŪ¤Ë¥É¥é¥¤¥Ö¤ÎÀèƬ¤«¤é\n"
-"1024 ¥·¥ê¥ó¥À¤è¤ê±ó¤¯¤Ë¤¢¤Ã¤Æ¡¤¤µ¤é¤Ë¤¢¤Ê¤¿¤Ï/boot ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"»ý¤Ã¤Æ¤¤¤Þ¤»¤ó¤Í¡£LILO ¤ò¥Ö¡¼¥È¥Þ¥Í¡¼¥¸¥ã¤Ë»È¤¦¤Ê¤é¡¤/boot ¥Ñ¡¼¥Æ¥£\n"
-"¥·¥ç¥ó¤ÎÄɲäò¤ªËº¤ì¤Ê¤¯¡£"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"¤¢¤Ê¤¿¤Ï¥ë¡¼¥È(/)¤È¤È¤·¤Æ¥½¥Õ¥È¥¦¥§¥¢RAID¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤Ó¤Þ¤·¤¿¤Í¡£\n"
-"/boot ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó̵¤·¤Ç¤³¤ì¤òÁàºî½ÐÍè¤ë¥Ö¡¼¥È¥í¡¼¥À¤Ï¤¢¤ê¤Þ¤»¤ó¡£\n"
-"¤Ç¤¹¤«¤é /boot ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÎÄɲäò¤ªËº¤ì¤Ê¤¯¡£"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "¥É¥é¥¤¥Ö %s ¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò¥Ç¥£¥¹¥¯¤Ë½ñ¤­¹þ¤ß¤Þ¤¹¡ª"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "¥ê¥Ö¡¼¥È¤·¤Æ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ÎÊѹ¹¤òÈ¿±Ç¤µ¤»¤ëɬÍפ¬¤¢¤ê¤Þ¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤¿¤é¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s ¾å¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹¡£"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥ÈÃæ"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë %s ¤ò¥Õ¥©¡¼¥Þ¥Ã¥ÈÃæ"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s ¤ò¥Õ¥©¡¼¥Þ¥Ã¥ÈÃæ"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "¥Õ¥¡¥¤¥ë¤ò±£¤¹"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¥Õ¥¡¥¤¥ë¤ò°ÜÆ°"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"¥Ç¥£¥ì¥¯¥È¥ê %s ¤Ë¤Ï¤¹¤Ç¤Ë¥Ç¡¼¥¿¤¬¤¢¤ê¤Þ¤¹\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¥Õ¥¡¥¤¥ë¤ò°ÜÆ°Ãæ"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s ¥³¥Ô¡¼Ãæ"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s ºï½üÃæ"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s ¤Ï¤³¤ì¤Ç %s¤Ë¤Ê¤ê¤Þ¤·¤¿¡£"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "¥Ç¥Ð¥¤¥¹: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ¥Ç¥Ð¥¤¥¹¥ì¥¿¡¼: %s (¿äÄê)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "¥¿¥¤¥×: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "̾Á°: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "³«»Ï: ¥»¥¯¥¿ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "¥µ¥¤¥º: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ¥»¥¯¥¿"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "¥·¥ê¥ó¥À %d ¤«¤é¥·¥ê¥ó¥À %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥ÈºÑ¤ß\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "̤¥Õ¥©¡¼¥Þ¥Ã¥È\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "¥Þ¥¦¥ó¥ÈºÑ¤ß\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"¥Ç¥Õ¥©¥ë¥È¤Ç¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Ö¡¼¥È\n"
-"    (MS-DOS ¤Î¥Ö¡¼¥È, lilo ¤Ç¤Ï¤Ê¤¤)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "¥ì¥Ù¥ë %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "¥Á¥ã¥ó¥¯¥µ¥¤¥º %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID¥Ç¥£¥¹¥¯ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯¥Õ¥¡¥¤¥ë̾: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¤É¤¦¤â\n"
-"¥É¥é¥¤¥Ð¡¦¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤é¤·¤¤¤Ç¤¹¤è¡£\n"
-"¤¤¤¸¤é¤Ê¤¤¤Û¤¦¤¬¤¤¤¤¤Ç¤·¤ç¤¦¡£\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"¤³¤ÎÆÃÊÌ¤Ê Bootstrap\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¢\n"
-"¥Ç¥å¥¢¥ë¥Ö¡¼¥È¥·¥¹¥Æ¥àÍѤǤ¹¡£\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "¥µ¥¤¥º: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "¥¸¥ª¥á¥È¥ê: %s ¥·¥ê¥ó¥À, %s ¥Ø¥Ã¥É, %s ¥»¥¯¥¿\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "¾ðÊó: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM¥Ç¥£¥¹¥¯ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¥¿¥¤¥×: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "¥Ð¥¹ %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "¥ª¥×¥·¥ç¥ó: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "¥Õ¥¡¥¤¥ë°Å¹æ²½¤Î¸°"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à°Å¹æ²½ÍѤθ°¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "¤³¤Î°Å¹æ¸°¤Ï´Êñ¤¹¤®¤Þ¤¹¡ÊºÇÄã¤Ç¤â %d ʸ»ú»È¤Ã¤Æ¤¯¤À¤µ¤¤¡Ë"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "°Å¹æ¸°¤¬°ìÃפ·¤Þ¤»¤ó"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "°Å¹æ¸°"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "°Å¹æ¸°¡Ê¤â¤¦°ìÅÙÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡Ë"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "¥¿¥¤¥×¤ÎÊѹ¹"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "¥á¥Ç¥£¥¢¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "¥µ¡¼¥Ð¤ò¸¡º÷"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ¥Õ¥©¡¼¥Þ¥Ã¥È, %s ¼ºÇÔ"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s ¤ò ¥¿¥¤¥× %s ¤Ç¥Õ¥©¡¼¥Þ¥Ã¥È¤¹¤ëÊýË¡¤òÃΤê¤Þ¤»¤ó"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s ¤ò¥Ç¥£¥ì¥¯¥È¥ê %s ¤Ë¥Þ¥¦¥ó¥È¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ¼ºÇÔ¡¢exit code  %d ¤Þ¤¿¤Ï signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ¤ò¥¢¥ó¥Þ¥¦¥ó¥ÈÃæ¤Ë¥¨¥é¡¼: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "´Êñ¤Ë"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr ¤Ç"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "¥µ¡¼¥Ð"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB°Ê²¼¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë JFS ¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB°Ê²¼¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë ReiserFS ¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤Ï / ¤Ç»Ï¤Þ¤ëɬÍפ¬¤¢¤ê¤Þ¤¹"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È %s ¤Ë¥Þ¥¦¥ó¥ÈºÑ¤ß\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "LVM ÏÀÍý¥Ü¥ê¥å¡¼¥à¤Ï¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È %s ¤Ë¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "¤³¤Î¥Ç¥£¥ì¥¯¥È¥ê¤Ï root ¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥àÆâ¤Ë»Ä¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"¤³¤Î¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤Ë¤Ï¡¢¼Âºß¤¹¤ë¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à (ext2, reiserfs) \n"
-"¤¬É¬ÍפǤ¹¡£\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È %s ¤Ë¤Ï°Å¹æ²½¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Ï»È¤¨¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "¼«Æ°³ä¤êÅö¤Æ¤¬¤Ç¤­¤ë¤Û¤É¶õ¤­ÍÆÎ̤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "¤¹¤ë¤³¤È¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "½ñ¤­¹þ¤ß¤Î¤¿¤á %s ¤ò³«¤¯¤È¤­¥¨¥é¡¼¤¬È¯À¸: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"¥¨¥é¡¼È¯À¸ - ¿·¤·¤¤¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤ò¹½ÃۤǤ­¤ë¤è¤¦¤Ê¥Ç¥Ð¥¤¥¹¤¬\n"
-"¸«ÉÕ¤«¤ê¤Þ¤»¤ó¡£¤Ê¤Ë¤¬¸¶°ø¤«¡¢¥Ï¡¼¥É¥¦¥§¥¢¤ò¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ¤Ï¥Þ¥ë¥Á¥æ¡¼¥¶¥·¥¹¥Æ¥à¤Ç¤¹¡£¤Ä¤Þ¤ê³Æ¥æ¡¼¥¶¤Ï¼«Ê¬¤Î¹¥¤­¤ÊÀßÄê¤ä\n"
-"¥Õ¥¡¥¤¥ë¤ò¤â¤Æ¤Þ¤¹¡£¾Ü¤·¤¯¤Ï¡¢¥æ¡¼¥¶¡¼¥¬¥¤¥É¤òÆɤó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"¤Ç¤â´ÉÍý¼Ô¤Ç¤¢¤ë root ¤È¤Ï¤Á¤¬¤Ã¤Æ¡¢¤¢¤Ê¤¿¤¬¤³¤³¤ÇÄɲ乤ë¥æ¡¼¥¶¤Ï¡¢¼«Ê¬\n"
-"¤Î¥Õ¥¡¥¤¥ë¤È¼«Ê¬¤ÎÀßÄê°Ê³°¤Î¤â¤Î¤ÏÊѤ¨¤ë¸¢¸Â¤¬¤¢¤ê¤Þ¤»¤ó¡£¼«Ê¬ÍѤ˾¯¤Ê¤¯\n"
-"¤È¤â°ì¤Ä°ìÈ̥桼¥¶¤òºî¤Ã¤Æ¤¯¤À¤µ¤¤¡£¤Õ¤Ä¤¦»È¤¦¤È¤­¤Ë¤Ï¡¢¤½¤Î¥¢¥«¥¦¥ó¥È¤ò\n"
-"»È¤¤¤Þ¤¹¡£ËèÆü root ¤Ç¥í¥°¥¤¥ó¤¹¤ë¤È¼ê´Ö¤Ï¾Ê¤±¤Þ¤¹¤¬¡¢¤È¤Ã¤Æ¤â´í¸±¤Ç¤¹!\n"
-"¤Á¤ç¤Ã¤È¤·¤¿¤Þ¤Á¤¬¤¤¤Ç¥·¥¹¥Æ¥à¤¬Æ°¤«¤Ê¤¯¤Ê¤ê¤«¤Í¤Þ¤»¤ó¡£¤â¤·°ìÈ̥桼¥¶¤Ç\n"
-"Çɼê¤Ê¥ß¥¹¤ò¤·¤Æ¤â¡¢°ìÉô¾ðÊó¤ò¼º¤¦¤«¤â¤·¤ì¤Þ¤»¤ó¤¬¡¢¥·¥¹¥Æ¥àÁ´ÂΤˤϱƶÁ\n"
-"¤·¤Þ¤»¤ó¡£\n"
-"\n"
-"¤Þ¤º¡¢ËÜ̾¤òÆþ¤ì¤Þ¤¹¡£¤³¤ì¤Ïɬ¤º¤·¤âɬÍפ¢¤ê¤Þ¤»¤ó¡£¼ÂºÝ¤Ë¤Ï¹¥¤­¤Ê¤â¤Î¤ò\n"
-"Æþ¤ì¤é¤ì¤Þ¤¹¡£¤¹¤ë¤È drakX ¤Ï¤¢¤Ê¤¿¤ÎÆþÎϤ·¤¿ºÇ½é¤Îñ¸ì¤ò¤È¤Ã¤Æ¡¢¤½¤ì¤ò\n"
-"¥æ¡¼¥¶Ì¾¤Ç»È¤¤¤Þ¤¹¡£¤³¤ì¤Ï¡¢¤½¤Î¥æ¡¼¥¶¤¬¥·¥¹¥Æ¥à¤Ë¥í¥°¥ª¥ó¤¹¤ë¤È¤­¤Î̾Á°\n"
-"¤Ë¤Ê¤ê¤Þ¤¹¡£¤³¤ì¤ÏÊѤ¨¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤½¤ì¤«¤é¥Ñ¥¹¥ï¡¼¥É¤òÆþÎϤ·¤Þ¤¹¡£\n"
-"Æø¢¤Ê¤·¤Î¡Ê°ìÈ̡˥桼¥¶¤Î¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢¥»¥­¥å¥ê¥Æ¥£¤Î´ÑÅÀ¤«¤é¤Ï root ¤Î\n"
-"¥Ñ¥¹¥ï¡¼¥É¤Û¤É½ÅÍפǤϤ¢¤ê¤Þ¤»¤ó¤¬¡¢¤À¤«¤é¤È¤¤¤Ã¤Æ°Â°×¤Ê¤³¤È¤Ï¤·¤Ê¤¤¤Ç¤¯\n"
-"¤À¤µ¤¤¡£¤¢¤Ê¤¿¤Î¥Õ¥¡¥¤¥ë¤¬´í¸±¤Ë¤µ¤é¤µ¤ì¤Þ¤¹¡£\n"
-"\n"
-"¡Ö¥æ¡¼¥¶¤òÄɲáפò¥¯¥ê¥Ã¥¯¤·¤¿¤é¡¢¹¥¤­¤Ê¤À¤±¥æ¡¼¥¶¤òÄɲäǤ­¤Þ¤¹¡£Ãç´Ö¤Î\n"
-"¤½¤ì¤¾¤ì¤Ë¥¢¥«¥¦¥ó¥È¤ò¤Ä¤¯¤ê¤Þ¤·¤ç¤¦¡£¤ªÉ㤵¤ó¤äËå¤Îʬ¤Ç¤â¡£¹¥¤­¤Ê¤À¤±¤Î\n"
-"¥æ¡¼¥¶¤òÄɲä·½ª¤¨¤¿¤é¡¢¡Ö´°Î»¡×¤ò²¡¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¡Ö¹âÅÙ¤ÊÁªÂò¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¤½¤Î¥æ¡¼¥¶¤Î¥Ç¥Õ¥©¥ë¥È¤Î¥·¥§¥ë¤òÊѤ¨¤é¤ì¤Þ\n"
-"¤¹¡Ê¥Ç¥Õ¥©¥ë¥È¤Ï bash¡Ë"
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Ë¸¡½Ð¤µ¤ì¤¿¡¢´û¸¤Î Linux ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾å¤Ë\n"
-"¼¨¤·¤Þ¤¹¡£¥¦¥£¥¶¡¼¥É¤ÎÁªÂò¤ò¤½¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤¤¤Æ¤â¤¤¤¤¤Ç¤·¤ç¤¦¡£\n"
-"Ä̾ï¤ÎÍøÍѤˤÏÌäÂꤢ¤ê¤Þ¤»¤ó¡£ÁªÂò¤òÊѤ¨¤¿¤é¡¢ºÇÄã¤Ç¤â root\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ê¡Ö/¡×¡Ë¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£¤¢¤Þ¤ê¾®¤µ¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó\n"
-"¤ò¤³¤³¤ÇÁª¤Ö¤È¡¢¥½¥Õ¥È¤¬Æþ¤êÀÚ¤é¤Ê¤¯¤Ê¤ê¤Þ¤¹¤è¡£¤Þ¤¿¡¢¥Ç¡¼¥¿¤òÊ̤Î\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ëµ¯¤­¤¿¤±¤ì¤Ð¡¢¡Ö/home¡×¤â»ØÄꤷ¤Þ¤·¤ç¤¦¡Ê¤³¤ì¤Ï¡¢\n"
-"Linux ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬Ê£¿ô¤Ê¤¤¤ÈÉÔ²Äǽ¤Ç¤¹¤¬¡Ë¡£\n"
-"\n"
-"\n"
-"¤Á¤Ê¤ß¤Ë³Æ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï°Ê²¼¤Î½ñ¼°¤Çµó¤¬¤Ã¤Æ¤¤¤Þ¤¹: ¡Ö̾Á°¡×¡ÖÍÆÎÌ¡×\n"
-"\n"
-"\n"
-"¡Ö̾Á°¡×¤Ï¼¡¤Î½ñ¼°¤Ç¤¹: ¡Ö¥Ï¡¼¥É¥Ç¥£¥¹¥¯¼ïÎà¡×¡Ö¥É¥é¥¤¥ÖÈÖ¹æ¡×\n"
-"¡Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥óÈÖ¹æ¡×¡Ê¤¿¤È¤¨¤Ð¡Öhda1¡×)\n"
-"\n"
-"\n"
-"¡Ö¥Ï¡¼¥É¥Ç¥£¥¹¥¯¼ïÎà¡×¤Ï¡¢IDE ¥Ç¥£¥¹¥¯¤Ê¤é¡Öhd¡×¤Ç¡¢SCSI ¤Ê¤é¡Ösd¡×\n"
-"¤Ç¤¹¡£\n"
-"\n"
-"\n"
-"¡Ö¥É¥é¥¤¥ÖÈÖ¹æ¡×¤Ï¡¢¡Öhd¡×¤ä¡Ösd¡×¤Î¸å¤Ë¤Ä¤¯Ê¸»ú¤Ç¤¹¡£IDE¤Ê¤é:\n"
-"\n"
-"   * ¡Öa¡×¤Ï¥×¥é¥¤¥Þ¥ê¥³¥ó¥È¥í¡¼¥é¾å¤Î¥Þ¥¹¥¿¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öb¡×¤Ï¥×¥é¥¤¥Þ¥ê¥³¥ó¥È¥í¡¼¥é¾å¤Î¥¹¥ì¡¼¥Ö¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öc¡×¤Ï¥»¥«¥ó¥À¥êIDE¥³¥ó¥È¥í¡¼¥é¾å¤Î¥Þ¥¹¥¿¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öd¡×¤Ï¥»¥«¥ó¥À¥êIDE¥³¥ó¥È¥í¡¼¥é¾å¤Î¥¹¥ì¡¼¥Ö¥Ç¥£¥¹¥¯\n"
-"\n"
-"\n"
-"SCSI ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¾ì¹ç¡¢¡Öa¡×¤¬SCSI IDÈÖ¹æºÇ¾®¤Î¥Ç¥£¥¹¥¯¡¢\n"
-"¡Öb¡×¤Ï¤½¤Î¼¡¤ÎIDÈֹ桢¤È¤¤¤¦¶ñ¹ç¤Ç¤¹"
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux ¥¤¥ó¥¹¥È¡¼¥ë¤ÏCD-ROM¿ôËç¤Ë¤Þ¤¿¤¬¤ê¤Þ¤¹¡£DrakX\n"
-"¤Ï¡¢Áª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤¬Ê̤ÎCD-ROM¾å¤Ë¤¢¤ë¤È¤­¤Ï¡¢¤¤¤Þ¤ÎCD¤ò\n"
-"ÅǤ­½Ð¤·¤Æ¡¢É¬ÍפÊÊ̤ΠCD ¤òÆþ¤ì¤ë¤è¤¦Í׵ᤷ¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"¤Ç¤Ï¡¢¥·¥¹¥Æ¥à¤Ë¤É¤ó¤Ê¥½¥Õ¥È¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤«»ØÄꤷ¤Þ¤·¤ç¤¦¡£\n"
-"Mandrake Linux ¤Ç»È¤¨¤ë¥½¥Õ¥È¤Ï²¿Àé¤È¤¢¤ê¤Þ¤¹¤·¡¢Á´Éô¤ò³Ð¤¨¤é¤ì¤ë¿Í¤Ï\n"
-"¤¤¤Þ¤»¤ó¡£\n"
-"\n"
-"CD-ROM ¤«¤é¤Îɸ½à¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤Æ¤¤¤ë¤Ê¤é¡¢¤Þ¤º¼ê»ý¤Á¤ÎCD¤ò¶µ¤¨¤ë¤è¤¦\n"
-"¸À¤ï¤ì¤Þ¤¹¡Ê¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¤Ç¤Î¤ß¡Ë¡£¼ê»ý¤ÁCD¤Î¥é¥Ù¥ë¤òÄ´¤Ù¤Æ¡¢¥¤¥ó\n"
-"¥¹¥È¡¼¥ëÍѤ˻Ȥ¨¤ëCD¤Î¥Á¥§¥Ã¥¯¥Ü¥Ã¥¯¥¹¤ò¥Ï¥¤¥é¥¤¥È¤·¤Þ¤·¤ç¤¦¡£Á´Éô¤¹¤ó\n"
-"¤À¤éOK¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£\n"
-"\n"
-"¥Ñ¥Ã¥±¡¼¥¸¤Ï¡¢¥Þ¥·¥ó¤Î»È¤¤Êý¤Ë±þ¤¸¤Æ¥°¥ë¡¼¥×¤´¤È¤Ë¤Þ¤È¤á¤é¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-"¥°¥ë¡¼¥×¼«ÂΤ⣴¤Ä¤ÎÉôʬ¤ÇÀ°Íý¤µ¤ì¤Æ¤¤¤Þ¤¹:\n"
-"\n"
-" * ¡Ö¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó¡×: ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó¤È¤·¤Æ¥Þ¥·¥ó¤ò»È¤¦¤Ê¤é¡¢°Ê²¼¤Î\n"
-"¥°¥ë¡¼¥×¤Ç»È¤¦¤â¤Î¤òÁ´ÉôÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-" * ¡Ö³«È¯¡×: ¥Þ¥·¥ó¤ò¥×¥í¥°¥é¥ß¥ó¥°¤Ë»È¤¦¤Ê¤é¡¢°Ê²¼¤«¤é¤Û¤·¤¤¥°¥ë¡¼¥×¤ò\n"
-"¤¤¤¯¤Ä¤Ç¤âÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-" * ¡Ö¥µ¡¼¥Ð¡×: ¤³¤ì¤¬¥µ¡¼¥ÐÍÑ¥Þ¥·¥ó¤Ë¤Ê¤ë¤Ê¤é¡¢¥Þ¥·¥ó¤Ë¥¤¥ó¥¹\n"
-"¥È¡¼¥ë¤·¤¿¤¤°ìÈÌŪ¤Ê¥µ¡¼¥Ó¥¹¤ò¤³¤³¤ÇÁª¤Ù¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­¡×: ºÇ¸å¤Ë¡¢¤³¤³¤Ç¤Ï¹¥¤ß¤Î¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­¤òÁª¤Ó¤Þ¤¹¡£\n"
-"¥°¥é¥Õ¥£¥Ã¥¯¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó¤¬¤Û¤·¤±¤ì¤Ð¡¢ºÇÄã°ì¤Ä¤ÏÁª¤Ó¤Þ¤·¤ç¤¦!\n"
-"\n"
-"¥Þ¥¦¥¹¤Î¥«¡¼¥½¥ë¤ò¥°¥ë¡¼¥×̾¾å¤ËÆ°¤«¤¹¤È¡¢¤½¤Î¥°¥ë¡¼¥×¤Ë¤Ä¤¤¤Æ¤Îû¤¤\n"
-"ÀâÌÀ¤¬¤Ç¤Þ¤¹¡£Ä̾磻¥ó¥¹¥È¡¼¥ë»þ¡Ê¥¢¥Ã¥×¥°¥ì¡¼¥É¤Ç¤Ï¤Ê¤¯¡Ë¤Ë²¿¤â\n"
-"¥°¥ë¡¼¥×¤òÁª¤Ð¤Ê¤¤¤È¡¢¥À¥¤¥¢¥í¥°¤¬¥Ý¥Ã¥×¥¢¥Ã¥×¤·¤Æ¡¢³Æ¼ï¤ÎºÇÄã¸Â\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤òÄó°Æ¤·¤Æ¤¯¤ì¤Þ¤¹¡§\n"
-"\n"
-" * ¡ÖX ¤ò»È¤¦¡×¥¤¥ó¥¹¥È¡¼¥ë¤Ï¡¢¥°¥é¥Õ¥£¥Ã¥¯¥Ç¥¹¥¯¥È¥Ã¥×¤ò¼Â¸½¤¹¤ë\n"
-"ɬÍ׺ÇÄã¸Â¤Î¥Ñ¥Ã¥±¡¼¥¸¤À¤±¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹;\n"
-"\n"
-" * ¡Ö´ðËÜŪ¤Êʸ½ñ¤âÆþ¤ì¤ë¡×´ðËÜ¥·¥¹¥Æ¥à¤È¡¢´ðËܥ桼¥Æ¥£¥ê¥Æ¥£¤ä\n"
-"¤½¤Î¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó¤âƳÆþ¡¢¤³¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ï¥µ¡¼¥ÐÀßÃÖÍѤË\n"
-"¸þ¤¤¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-" * ¡ÖËÜÅö¤ËºÇÄã¸Â¤Î¥¤¥ó¥¹¥È¡¼¥ë¡×¤È¤Ë¤«¤¯LInux¥·¥¹¥Æ¥à¤ò²ÔƯ¤µ¤»¤ë\n"
-"ɬÍ׺ÇÄã¸Â¤Î¤â¤Î¤À¤±¤ò¥¤¥ó¥¹¥È¡¼¥ë¡£¥³¥Þ¥ó¥É¥é¥¤¥ó¤Î¤ß¡£¤³¤Î¥¤¥ó¥¹¥È¡¼¥ë\n"
-"¤ÏÁ´Éô¤Ç 65Mb ÄøÅ٤Ǥ¹¡£\n"
-"\n"
-"¡Ö¸ÄÊ̥ѥ屡¼¥¸¤ÎÁªÂò¡×¥ª¥×¥·¥ç¥ó¤ò¥Á¥§¥Ã¥¯¤¹¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£\n"
-"Ä󶡤µ¤ì¤Æ¤¤¤ë¥Ñ¥Ã¥±¡¼¥¸¤ò½ÏÃΤ·¤Æ¤¤¤ë¤«¡¢¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤ë¤â¤Î¤ò\n"
-"´°Á´¤ËÇÄ°®¤·¤¿¤±¤ì¤Ð¤³¤ì¤ò»È¤¤¤Þ¤¹¡£\n"
-"\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤ò¡Ö¹¹¿·¡×¥â¡¼¥É¤Ç³«»Ï¤·¤¿¤é¡¢Á´¥°¥ë¡¼¥×¤òÈóÁªÂò¤Ë¤¹¤ë\n"
-"¤È¿·¤·¤¤¥Ñ¥Ã¥±¡¼¥¸¤ÏÆþ¤ì¤º¤Ë¡¢´û¸¥·¥¹¥Æ¥à¤Î½¤Éü¹¹¿·¤ò¤¹¤ë¤À¤±¤Ë¤Ê\n"
-"¤ê¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"ºÇ¸å¤Ë¡¢¡Ö¸ÄÊ̥ѥ屡¼¥¸¤ÎÁªÂò¡×¤òÁª¤ó¤À¤«¤É¤¦¤«¤Ë¤è¤Ã¤Æ¤Ï\n"
-"¤¹¤Ù¤Æ¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬¥°¥ë¡¼¥×¤´¤È¤ËʬÎव¤ì¤Æ¥Ä¥ê¡¼É½¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"¤³¤Î¥Ä¥ê¡¼¤ò¸«¤Ê¤¬¤é¡¢¥°¥ë¡¼¥×¤ä¥µ¥Ö¥°¥ë¡¼¥×ñ°Ì¡¢¤Þ¤¿¤Ï¸ÄÊÌ\n"
-"¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤ê½ü³°¤·¤¿¤ê¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¥Ä¥ê¡¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤Ö¤È¡¢±¦¤Ë¤½¤ÎÀâÌÀ¤¬½Ð¤Þ¤¹¡£Áª¤Ó½ª¤ï¤Ã¤¿¤é\n"
-"¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¥Ü¥¿¥ó¤ò²¡¤·¤Þ¤·¤ç¤¦¡£¥¤¥ó¥¹¥È¡¼¥ë¤¬»Ï¤Þ¤ê¤Þ¤¹¡£\n"
-"¥Ï¡¼¥É¥¦¥§¥¢¤Î®ÅÙ¤ÈÁª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤Î¿ô¤Ë¤è¤Ã¤Æ¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë\n"
-"´°Î»¤Þ¤Ç¤Ë¤«¤Ê¤ê»þ´Ö¤¬¤«¤«¤ê¤Þ¤¹¡£´°Î»¤Þ¤Ç¤Î¿äÄê»þ¹ï¤¬É½¼¨¤µ¤ì¤ë\n"
-"¤Î¤Ç¡¢¤½¤ì¤ò¸«¤Æ¤Ê¤ó¤Ç¤·¤¿¤é¤ªÃã¤Ç¤â¤É¤¦¤¾¡£\n"
-"\n"
-"!! ¥µ¡¼¥Ð¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤ê¡¢¤¢¤ë¤¤¤Ï¤½¤ì¤¬¤É¤³¤«¤Î¥°¥ë¡¼¥×¤Ë\n"
-"´Þ¤Þ¤ì¤Æ¤¤¤¿¾ì¹ç¤Ë¤Ï¡¢¤½¤Î¥µ¡¼¥Ð¤òËÜÅö¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¤«¡¢\n"
-"³Îǧ¤òµá¤á¤é¤ì¤Þ¤¹¡£Mandrake Linux¤Ç¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤¿¥µ¡¼¥Ð\n"
-"¤Ï¥Ç¥Õ¥©¥ë¥È¤Çµ¯Æ°»þ¤Ë¤¿¤Á¤¢¤¬¤ê¤Þ¤¹¡£¤³¤Î¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó\n"
-"½Ð²Ù»þ¤Ë¤Ï°ÂÁ´¤ÇÌäÂ꤬ÃΤé¤ì¤Æ¤¤¤Ê¤¯¤Æ¤â¡¢¤³¤Î¥Ð¡¼¥¸¥ç¥ó´°À®¸å¤Ë\n"
-"¥»¥­¥å¥ê¥Æ¥£¥Û¡¼¥ë¤¬¸«¤Ä¤«¤ë¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤â¤·¤½¤Î¥µ¡¼¥Ó¥¹¤¬²¿¤Î\n"
-"¤¿¤á¤Î¤â¤Î¤«¡¢¤Ê¤¼¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤ë¤Î¤«¤¬¤ï¤«¤é¤Ê¤±¤ì¤Ð¡Ö¤¤¤¤¤¨¡×\n"
-"¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£¡Ö¤Ï¤¤¡×¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢°ìÍ÷¤Î¥µ¡¼¥Ó¥¹¤Ï\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¡¢¥Ç¥Õ¥©¥ë¥È¤Çµ¯Æ°»þ¤Ë¤¿¤Á¤¢¤¬¤ê¤Þ¤¹¡£ !!\n"
-"\n"
-"¡Ö°Í¸´Ø·¸¤Î¼«Æ°²ò·è¡×¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¡¢¥¤¥ó¥¹¥È¡¼¥é¤¬¼«Æ°Åª¤Ë\n"
-"¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤È¤­¤Ë¤â·Ù¹ð¥À¥¤¥¢¥í¥°¤¬½Ð¤Þ¤»¤ó¡£¤Ê¤¼¾¡¼ê¤Ë¥Ñ\n"
-"¥Ã¥±¡¼¥¸¤òÁª¤Ö¤«¤È¸À¤¦¤È¡¢¤Û¤«¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤È¤­\n"
-"¤ËɬÍפȤʤë¥Ñ¥Ã¥±¡¼¥¸¤¬¤¢¤Ã¤Æ¡¢¤½¤ì¤¬¤Ê¤¤¤È¥¤¥ó¥¹¥È¡¼¥ë¤¬´°Î»¤·\n"
-"¤Ê¤¤¤«¤é¤Ç¤¹¡£\n"
-"\n"
-"°ìÍ÷¤Î²¼¤Ë¤¢¤ë¾®¤µ¤Ê¥Õ¥í¥Ã¥Ô¡¼¥Ç¥£¥¹¥¯¤Î¥¢¥¤¥³¥ó¤Ï¡¢°ÊÁ°¤Î¥¤¥ó¥¹\n"
-"¥È¡¼¥ë»þ¤ËÁª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸°ìÍ÷¤òÆɤ߹þ¤à¤¿¤á¤Î¤â¤Î¤Ç¤¹¡£¤³¤Î¥¢¥¤\n"
-"¥³¥ó¤òÁª¤Ö¤È¡¢°ÊÁ°¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÎºÇ¸å¤Ëºî¤Ã¤¿¥Õ¥í¥Ã¥Ô¡¼¤òÆþ¤ì¤ë\n"
-"¤è¤¦¤Ë»Ù»ý¤¬½Ð¤Þ¤¹¡£¤³¤¦¤¤¤¦¥Õ¥í¥Ã¥Ô¡¼¤Îºî¤êÊý¤Ï¡¢¤µ¤¤¤´¤Î¥¹¥Æ¥Ã¥×\n"
-"¤ÎÆóÈÖÌܤΥҥó¥È¤òÆɤó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"¤³¤³¤Ç¤Ï¡¢¥¤¥ó¥¿¡¼¥Í¥Ã¥È/¥Í¥Ã¥È¥ï¡¼¥¯Àܳ¤ÎÀßÄ꤬¤Ç¤­¤Þ¤¹¡£¥Þ¥·¥ó¤ò\n"
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤äLAN¤Ë¤Ä¤Ê¤®¤¿¤¤¤Ê¤é¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹¤ä¥â¥Ç¥à¤Î¼«Æ°¸¡½Ð¤¬³«»Ï¤µ¤ì¤Þ¤¹¡£¤â¤·¤³¤Î¸¡½Ð\n"
-"¤¬¤¦¤Þ¤¯¤¤¤«¤Ê¤±¤ì¤Ð¡¢¼¡²ó¤Ï¡Ö¼«Æ°¸¡½Ð¤ò»È¤¦¡×¤Î¥Á¥§¥Ã¥¯¤ò¤Ï¤º¤·¤Æ\n"
-"¤ª¤­¤Þ¤·¤ç¤¦¡£¤Þ¤¿¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤ò¤·¤Ê¤¤¡¢¤¢¤ë¤¤¤Ï¸å²ó¤·¤Ë¤â¤Ç¤­\n"
-"¤Þ¤¹¡£¤½¤Î¾ì¹ç¤Ë¤Ï¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤À¤±¤Ç¤¹¡£\n"
-"\n"
-"²Äǽ¤ÊÀܳ¤Ï¡¢ÉáÄ̤Υâ¥Ç¥à¡¢ISDN¥â¥Ç¥à¡¢ADSLÀܳ¡¢¥±¡¼¥Ö¥ë¥â¥Ç¥à¡¢¤½¤·¤Æ\n"
-"Ä̾ï¤ÎLANÀܳ¡Ê¥¤¡¼¥µ¥Í¥Ã¥È¡Ë¤Ç¤¹¡£\n"
-"\n"
-"¤³¤³¤Ç¤ÏÀßÄê¤ÎºÙ¤«¤¤ÏäϤ·¤Þ¤»¤ó¡£¤¿¤À¡¢¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥µ¡¼¥Ó¥¹¥×¥í¥Ð¥¤¥À\n"
-"¤ä¥·¥¹¥Æ¥à´ÉÍý¼Ô¤Ë¤â¤é¤Ã¤¿¥Ñ¥é¥á¡¼¥¿¤ÏÁ´ÉôÍÑ°Õ¤·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"ÀßÄê¤Î¾ÜºÙ¤Ï¡¢¥Þ¥Ë¥å¥¢¥ë¤Î¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Î¾Ï¤ò¸«¤ë¤«¡¢¤¢¤ë¤¤¤Ïñ¤Ë\n"
-"¥·¥¹¥Æ¥àÀßÄ꤬¤¹¤ó¤Ç¤«¤é¡¢¤½¤³¤ÇÀâÌÀ¤¹¤ë¥×¥í¥°¥é¥à¤ò»È¤Ã¤ÆÀܳ¤òÀßÄꤷ\n"
-"¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê¤Ï¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ë¤ä¤ê¤¿¤¤¡¢¤¢¤ë¤¤¤Ï¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄ꤬\n"
-"¤¹¤ó¤Ç¤¤¤ë¤Ê¤é¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò²¡¤·¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"¤Ç¤Ï¥Þ¥·¥ó¤Îµ¯Æ°»þ¤Ë¼«Æ°Åª¤Ë³«»Ï¤·¤¿¤¤¥µ¡¼¥Ó¥¹¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¤³¤³¤Ë¤Ï¸½ºß¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ç»È¤¨¤ë¥µ¡¼¥Ó¥¹¤¬Á´Éôµó¤¬¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"¤è¤¯¸«¤Æ¡¢µ¯Æ°»þ¤Ëɬ¤º¤·¤âɬÍפʤ¤¤â¤Î¤Î¥Á¥§¥Ã¥¯¤ò¤Ï¤º¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"³Æ¥µ¡¼¥Ó¥¹¤òÁª¤Ö¤È¡¢ÀâÌÀ¤¬½Ð¤Þ¤¹¡£¤Ç¤â¡¢¤½¤Î¥µ¡¼¥Ó¥¹¤¬Ìò¤ËΩ¤Ä¤«\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤¯¤Û¤¦¤¬ÌµÆñ¤Ç¤¹¡£\n"
-"\n"
-"¤³¤Î¥Þ¥·¥ó¤ò¥µ¡¼¥Ð¤Ë¤¹¤ë¤Ä¤â¤ê¤Ê¤é¡¢¤³¤³¤Ç¤ÏÆä˵¤¤ò¤Ä¤±¤Þ¤·¤ç¤¦¡£\n"
-"»È¤ï¤Ê¤¤¥µ¡¼¥Ó¥¹¤ò¤à¤ä¤ß¤Ë³«»Ï¤µ¤»¤Æ¤Ï¤¤¤±¤Þ¤»¤ó¡£°ìÉô¤Î¥µ¡¼¥Ó¥¹¤Ï¡¢\n"
-"¥µ¡¼¥Ð¾å¤Ç»È¤¦¤È´í¸±¤À¤È¤¤¤¦¤Î¤ò¤ªËº¤ì¤Ê¤¯¡£\n"
-"°ìÈ̤ˡ¢ËÜÅö¤ËɬÍפʥµ¡¼¥Ó¥¹¤À¤±Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux ¤Ï»þ´Ö¤ò GMT (¥°¥ê¥Ë¥Ã¥¸É¸½à»þ) ¤Ç´ÉÍý¤·¤Æ¡¢Áª¤Ð¤ì¤¿»þ´ÖÂÓ¤ò\n"
-"¤â¤È¤Ë¸½ÃÏ»þ´Ö¤ËÊÑ´¹¤·¤Þ¤¹¡£¤Ç¤â¡¢¡Ö¥Ï¡¼¥É¥¦¥§¥¢¥¯¥í¥Ã¥¯¤òGMT¤Ë¤¢¤ï¤»¤ë¡×\n"
-"¤òÈóÁªÂò¤Ë¤¹¤ì¤Ð¡¢¤³¤ÎÊý¼°¤ò¤ä¤á¤Æ¡¢¥Ï¡¼¥É¥¦¥§¥¢¥¯¥í¥Ã¥¯¤È¥·¥¹¥Æ¥à¥¯¥í¥Ã¥¯\n"
-"¤¬Æ±¤¸»þ´Ö¤Ë¤Ê¤ë¤è¤¦¤Ë¤Ç¤­¤Þ¤¹¡£¤â¤·¤³¤Î¥Þ¥·¥ó¤Ç¥¦¥£¥ó¥É¥¦¥º¤Î¤è¤¦¤ÊÊ̤Î\n"
-"OS ¤òÆ°¤«¤·¤Æ¤¤¤ë¤Ê¤é¡¢¤½¤Î¤Û¤¦¤¬¤¤¤¤¤Ç¤·¤ç¤¦¡£\n"
-"\n"
-"¡Ö¼«Æ°»þ´Ö¤¢¤ï¤»¡×¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¡¢¥¤¥ó¥¿¡¼¥Í¥Ã¥È¾å¤Î¥ê¥â¡¼¥È¥¿¥¤¥à\n"
-"¥µ¡¼¥Ð¤ËÀܳ¤·¤Æ¡¢¼«Æ°Åª¤Ë»þ´Ö¤¢¤ï¤»¤ò¹Ô¤¤¤Þ¤¹¡£½Ð¤Æ¤­¤¿°ìÍ÷¤«¤é¡¢ºÇ´ó¤ê\n"
-"¤Î¥µ¡¼¥Ð¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤â¤Á¤í¤ó¤³¤Îµ¡Ç½¤ò»È¤¦¤Ë¤Ï¡¢¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ\n"
-"¤¬É¬Íפˤʤê¤Þ¤¹¡£¤¢¤Ê¤¿¤Î¥Þ¥·¥ó¾å¤Ë¥¿¥¤¥à¥µ¡¼¥Ð¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¡¢\n"
-"¥ª¥×¥·¥ç¥ó¤Ë¤è¤Ã¤Æ¤Ï¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¾¤Î¥Þ¥·¥ó¤¬¡¢¤½¤ì¤ËÀܳ¤·¤Æ\n"
-"»þ´Ö¤¢¤ï¤»¤ò¤¹¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (X ¥¦¥£¥ó¥É¥¦¥·¥¹¥Æ¥à) ¤Ï¡¢GNU/Linux ¥°¥é¥Õ¥£¥Ã¥¯¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤Î\n"
-"¥­¥â¤Ç¡¢Mandrake Linux ¤Ë¤Ä¤¤¤Æ¤¤¤ë¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­ (KDE, Gnome, \n"
-"AfterStep, WindowMaker...)¤Ï¤¹¤Ù¤Æ¤³¤ì¤Ë°Í¸¤·¤Þ¤¹¡£¤³¤³¤Ç¤Ï¡¢DrakX\n"
-"¤Ï¼«Æ°Åª¤Ë X ¤òÀßÄꤷ¤è¤¦¤È¤·¤Þ¤¹¡£\n"
-"\n"
-"¤³¤ì¤¬¼ºÇÔ¤¹¤ë¤³¤È¤Ï¤Þ¤º¤¢¤ê¤Þ¤»¤ó¡£¼ºÇÔ¤¹¤ë²ÄǽÀ­¤È¤·¤Æ¹Í¤¨¤é¤ì¤ë¤Î\n"
-"¤Ï¡¢¥Ï¡¼¥É¥¦¥§¥¢¤¬¤È¤Æ¤â¸Å¤¤¡Ê¤«¿·¤·¤¹¤®¡Ë¤È¤¤¤¦¤³¤È¤Ç¤¹¡£À®¸ù¤¹¤ì¤Ð\n"
-"¥â¥Ë¥¿¤Ë²Äǽ¤ÊºÇÂç¤Î²òÁüÅ٤Ǽ«Æ°Åª¤ËX¤¬µ¯Æ°¤·¤Þ¤¹¡£¤½¤·¤Æ¥¦¥£¥ó¥É¥¦\n"
-"¤¬½Ð¤Æ¤­¤Æ¡¢¤³¤Î²èÌ̤¬¸«¤¨¤ë¤«¤È³Îǧ¤·¤Þ¤¹¡£\n"
-"\n"
-"¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×¥¤¥ó¥¹¥È¡¼¥ë¤Î¾ì¹ç¤Ë¤Ï¡¢X ÀßÄꥦ¥£¥¶¡¼¥É¤ËÆþ¤ê¤Þ¤¹¡£\n"
-"¤³¤Î¥¦¥£¥¶¡¼¥É¤Ë¤Ä¤¤¤Æ¾Ü¤·¤¯¤Ï¡¢¥Þ¥Ë¥å¥¢¥ë¤ò¸«¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¥á¥Ã¥»¡¼¥¸¤¬¸«¤¨¤Æ¡¢¤½¤ì¤Ë¡Ö¤Ï¤¤¡×¤ÈÅú¤¨¤¿¤é¡¢DrakX ¤Ï¼¡¤Ë¿Ê¤ß¤Þ¤¹¡£\n"
-"¥á¥Ã¥»¡¼¥¸¤¬¸«¤¨¤Ê¤±¤ì¤Ð¡¢ÀßÄ꤬¤Þ¤Á¤¬¤Ã¤Æ¤¤¤ë¤È¤¤¤¦¤³¤È¤Ê¤Î¤Ç¡¢¤½¤Î\n"
-"¥Æ¥¹¥È¤Ï10ÉäǽªÎ»¤·¤Æ¡¢¤â¤È¤Î²èÌ̤ËÌá¤ê¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"°ìȯÌܤÀ¤È¡¢¤¢¤Þ¤ê²èÌ̤ζñ¹ç¤¬¤è¤¯¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£\n"
-"²èÌ̤¬¾®¤µ¤¹¤®¤ë¤È¤«¡¢º¸±¦¤Ë¤º¤ì¤Æ¤¤¤ë¤È¤«¡Ë¡£¤À¤«¤é X ¤¬Àµ¤·¤¯\n"
-"µ¯Æ°¤·¤¿¾ì¹ç¤Ë¤Ç¤â¡¢DrakX ¤ÏÀßÄ꤬ŬÀÚ¤«¤É¤¦¤«¤­¤¤¤Æ¡¢²Äǽ¤Ê³Æ¼ï¤Î\n"
-"¥â¡¼¥É¤òɽ¼¨¤·¤Æ¡¢¹¥¤­¤Ê¤Î¤òÁª¤Ù¤È¸À¤¦¤ï¤±¤Ç¤¹¡£\n"
-"\n"
-"ºÇ¸å¤Î¼êÃʤȤ·¤Æ¡¢ÁêÊѤï¤é¤ºX¤¬Æ°¤«¤Ê¤±¤ì¤Ð¡Ö¥°¥é¥Õ¥£¥Ã¥¯¥¹¥«¡¼¥É¤ÎÊѹ¹¡×\n"
-"¤òÁª¤Ó¡Ö°ìÍ÷¤Ë¤Ê¤¤¥«¡¼¥É¡×¤òÁªÂò¡¢¤É¤Î¥µ¡¼¥Ð¤ò»È¤¦¤«¤­¤«¤ì¤¿¤é FBDev¤ò\n"
-"Áª¤Ó¤Þ¤¹¡£¤³¤ì¤Ï¥Õ¥§¡¼¥ë¥»¡¼¥Õ¤ÊÁªÂò»è¤Ç¡¢ºÇ¶á¤Î¤¹¤Ù¤Æ¤Î¥°¥é¥Õ¥£¥Ã¥¯¥¹\n"
-"¥«¡¼¥É¤Ç»È¤¨¤Þ¤¹¡£¤½¤ì¤«¤é¡ÖºÆ¥Æ¥¹¥È¡×¤òÁª¤ó¤Ç³Îǧ¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"ºÇ¸å¤Ë¡¢µ¯Æ°»þ¤Ë¥°¥é¥Õ¥£¥Ã¥¯¥æ¡¼¥¶¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤¬¤Û¤·¤¤¤«Ê¹¤«¤ì¤Þ¤¹¡£\n"
-"ÀßÄê¤ò»î¤·¤Æ¤¤¤Ê¤¤¤È¤­¤Ç¤â¡¢¤³¤Î¼ÁÌä¤Ï½Ð¤Þ¤¹¡£¥Þ¥·¥ó¤ò¥µ¡¼¥Ð¤È¤·¤Æ»È¤¦¤«\n"
-"¥Ç¥£¥¹¥×¥ì¥¤¤ÎÀßÄ꤬¤¦¤Þ¤¯¤¤¤«¤Ê¤«¤Ã¤¿»þ¤Ë¤Ï¡¢¤³¤³¤Ç¤Ï¤â¤Á¤í¤ó¡Ö¤¤¤¤¤¨¡×\n"
-"¤ÈÅú¤¨¤Þ¤·¤ç¤¦¡£"
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM ¤Ë¤Ï¥ì¥¹¥­¥å¡¼¥â¡¼¥É¤¬ÁȤ߹þ¤ó¤Ç¤¢¤ê¤Þ¤¹¡£¤³¤ì¤ò\n"
-"»È¤¦¤Ë¤Ï CDROM ¤«¤éµ¯Æ°¤·¤Æ¡¢µ¯Æ°»þ¤Ë >>F1<< ¥­¡¼¤ò²¡¤·¡¢¥×¥í¥ó¥×¥È¤Ç\n"
-">>rescue<< ¤È¥¿¥¤¥×¤¹¤ë¤³¤È¤Ç¤¹¡£¤Ç¤â¡¢CDROM¤«¤éµ¯Æ°¤Ç¤­¤Ê¤¤¾ì¹ç¤Ë¤Ï¡¢\n"
-"2¼ïÎà¤Î¾ì¹ç¤Ë¤³¤³¤ËÌá¤Ã¤Æ¤¯¤ëɬÍפ¬¤¢¤ë¤Ç¤·¤ç¤¦:\n"
-"\n"
-" * ¥Ö¡¼¥È¥í¡¼¥À¤Î¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¤Ï¡¢drakX ¤Ï¼ç¥Ç¥£¥¹¥¯¤Î¥Ö¡¼¥È¥»¥¯¥¿\n"
-" (MBR) ¤ò½ñ¤­´¹¤¨¤Þ¤¹¡ÊÊ̤Υ֡¼¥È¥Þ¥Í¡¼¥¸¥ã¤ò»È¤Ã¤Æ¤¤¤Ê¤¤¸Â¤ê¡Ë¡£¤³¤¦\n"
-"¤¹¤ë¤³¤È¤Ç¡¢¥¦¥£¥ó¥É¥¦¥º¤È GNU/Linux ¤Î¤É¤Ã¤Á¤Ç¤âµ¯Æ°¤Ç¤­¤ë¤è¤¦¤Ë¤Ê¤ê\n"
-"¤Þ¤¹¡Ê¥·¥¹¥Æ¥à¤Ë¥¦¥£¥ó¥É¥¦¥º¤¬Æþ¤Ã¤Æ¤¤¤ë¾ì¹ç¡Ë¡£\n"
-"¡¡¥¦¥£¥ó¥É¥¦¥º¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Ê¤ª¤¹¤È¡¢¥Þ¥¤¥¯¥í¥½¥Õ¥È¤Î¥¤¥ó¥¹¥È¡¼¥ë\n"
-"¥×¥í¥»¥¹¤¬¥Ö¡¼¥È¥»¥¯¥¿¤ò½ñ¤­´¹¤¨¤ë¤Î¤Ç¡¢GNU/Linux¤¬µ¯Æ°¤Ç¤­¤Þ¤»¤ó!\n"
-"\n"
-" * ¤â¤·²¿¤«ÌäÂ꤬µ¯¤­¤Æ¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤«¤é GNU/Linux ¤òµ¯Æ°¤Ç¤­¤Ê¤¤\n"
-"¾ì¹ç¤Ë¤Ï¡¢GNU/Linux ¤òµ¯Æ°¤¹¤ë¤Ë¤Ï¤³¤Î¥Õ¥í¥Ã¥Ô¡¼¤·¤«¼ê¤¬¤¢¤ê¤Þ¤»¤ó¡£\n"
-"¤³¤Î¥Ç¥£¥¹¥¯¤Ë¤Ï¡¢ÄäÅŤȤ«¤Á¤ç¤Ã¤È¤·¤¿¥¿¥¤¥×¥ß¥¹¡¢¥Ñ¥¹¥ï¡¼¥É¤Î´Ö°ã¤¤\n"
-"¤Ê¤É¤Ë¤è¤ë¥¯¥é¥Ã¥·¥å¤«¤é¥·¥¹¥Æ¥à¤ò²óÉü¤µ¤»¤ë¤Î¤Ë»È¤¨¤ë¡¢³Æ¼ï¤Î¥Ä¡¼¥ë\n"
-"¤¬Æþ¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-"¤³¤Î¥¹¥Æ¥Ã¥×¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢¥Õ¥í¥Ã¥Ô¡¼¥Ç¥£¥¹¥¯¤ò¥É¥é¥¤¥Ö¤ËÆþ¤ì¤í¤È\n"
-"Í׵ᤵ¤ì¤Þ¤¹¡£ÁÞÆþ¤¹¤ë¥Õ¥í¥Ã¥Ô¡¼¥Ç¥£¥¹¥¯¤Ï¡¢¶õ¤«¡¢ÉÔÍפʥǡ¼¥¿¤·¤«\n"
-"Æþ¤Ã¤Æ¤¤¤Ê¤¤¤â¤Î¤Ë¤·¤Þ¤·¤ç¤¦¡£¥Õ¥©¡¼¥Þ¥Ã¥È¤¹¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£\n"
-"DrakX¤¬´°Á´¤Ë¤½¤ì¤ò½ñ¤­´¹¤¨¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"¤µ¤Æ¤³¤ó¤É¤Ï¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤ÇMandrake Linux OS ¤ò¤É¤³¤Ë¥¤¥ó¥¹¥È¡¼¥ë\n"
-"¤¹¤ë¤«Áª¤Ö¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£¤â¤·¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤¬¶õ¤«¡¢¤¹¤Ç¤ËÊ̤ΠOS ¤¬\n"
-"¥¹¥Ú¡¼¥¹¤òÁ´Éô»È¤Ã¤Æ¤·¤Þ¤Ã¤Æ¤¤¤¿¤é¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀڤäƤä¤ëɬÍפ¬\n"
-"¤¢¤ê¤Þ¤¹¡£°ì¸À¤Ç¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤È¤¤¤¦¤Î¤Ï¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤òÏÀÍý\n"
-"Ū¤Ëʬ³ä¤·¤Æ¤ä¤ë¤³¤È¤Ç¤¹¡£¤½¤¦¤ä¤Ã¤Æ¡¢¿·¤·¤¯ Mandrake Linux ¥·¥¹¥Æ¥à¤ò\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¶èÀÚ¤ê¤ò¤³¤·¤é¤¨¤Æ¤ä¤ë¤ï¤±¤Ç¤¹¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤Î¤Ï¡¢¤ä¤ê¤Ê¤ª¤·¤ä¸åÌá¤ê¤¬¤­¤­¤Þ¤»¤ó¡£¤À¤«¤é\n"
-"½é¿´¼Ô¤Ë¤Ï¤ª¤Ã¤«¤Ê¤¤¤·¡¢µ¤Èè¤ì¤¹¤ëºî¶È¤Ç¤Ï¤¢¤ê¤Þ¤¹¡£\n"
-"¤³¤Î¥¦¥£¥¶¡¼¥É¤Ï¥×¥í¥»¥¹¤ò´Êñ¤Ë¤¹¤ë¤¿¤á¤Î¤â¤Î¤Ç¤¹¡£»Ï¤á¤ëÁ°¤Ë¡¢\n"
-"¥Þ¥Ë¥å¥¢¥ë¤ò¤¸¤Ã¤¯¤êÆɤó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤Æ¤¤¤¦¤Ê¤é¡¢Mandrake Linux \n"
-"¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Ä¡¼¥ë DiskDrake ¤¬µ¯Æ°¤·¤Þ¤¹¡£¤³¤ì¤ò»È¤¦¤È¡¢¥Ñ¡¼\n"
-"¥Æ¥£¥·¥ç¥ó¤ÎºÙ¤«¤¤ÀßÄ꤬¤Ç¤­¤Þ¤¹¡£¥Þ¥Ë¥å¥¢¥ë¤Î DiskDrake ¤Î¾Ï¤ò \n"
-"»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£»È¤¤Êý¤ÏƱ¤¸¤Ç¤¹¡£¥¤¥ó¥¹¥È¡¼¥ë¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ \n"
-"¤«¤é¤Ï¡¢¤³¤³¤ÇÀâÌÀ¤¹¤ë¥¦¥£¥¶¡¼¥É¤¬»È¤¨¤Þ¤¹¡£¤³¤ì¤Ë¤Ï¡¢¥¤¥ó¥¿¡¼ \n"
-"¥Õ¥§¡¼¥¹¤Ç¡Ö¥¦¥£¥¶¡¼¥É¡×¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¤â¤·¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¹¤Ç¤ËÀڤäƤ¢¤ë¤Ê¤é¡ÊÁ°¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤³ \n"
-"¤È¤¬¤¢¤ë¤È¤«¡¢Ê̤Υѡ¼¥Æ¥£¥·¥ç¥ó¥Ä¡¼¥ë¤ò»È¤Ã¤¿¤È¤«¡Ë¡¢¤¢¤È¤Ïñ¤Ë \n"
-"Linux ¥·¥¹¥Æ¥à¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ì¤Ð¤¤¤¤¤À¤±¤Ç¤¹¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤Þ¤ÀÄêµÁ¤µ¤ì¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢¿·¤·¤¯ºî¤ê¤Þ¤·¤ç¤¦¡£\n"
-"¤½¤ì¤Ë¤Ï¡¢¾å¤ÇÍÑ°Õ¤·¤¿¥¦¥£¥¶¡¼¥É¤ò»È¤Ã¤Æ¤¯¤À¤µ¤¤¡£¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤ÎÀßÄê\n"
-"¤Ë±þ¤¸¤Æ¡¢¤¤¤¯¤Ä¤«¤ä¤êÊý¤¬¤¢¤ê¤Þ¤¹:\n"
-"\n"
-" * ¶õ¤­¥¹¥Ú¡¼¥¹¤ò»È¤¦¡§¤³¤ì¤Ï¶õ¤­¥Ç¥£¥¹¥¯¤ò¼«Æ°Åª¤Ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤·¤Æ \n"
-"¤¯¤ì¤Þ¤¹¡£¤³¤ì°Ê¾å²¿¤â¤¹¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£\n"
-"\n"
-"* ´û¸¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò»È¤¦: ¥¦¥£¥¶¡¼¥É¤¬´û¸¤ÎLinux ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò \n"
-"¥Ç¥£¥¹¥¯¾å¤Ç¸«¤Ä¤±¤Þ¤·¤¿¡£¤â¤·¤³¤ì¤ò»È¤¦¤Ê¤é¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡£\n"
-"\n"
-" * ¥¦¥£¥ó¥É¥¦¥º¤Î¶õ¤­Éôʬ¤ò»È¤¦: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Ë¥¦¥£¥ó¥É¥¦¥º¤¬\n"
-"  ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Æ¤¤¤Æ¡¢¥Ç¥£¥¹¥¯Á´ÂΤò»È¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢\n"
-"  Linux ¤Î¥Ç¡¼¥¿ÍѤ˶õ¤­¤ò¤Ä¤¯¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£¤³¤ì¤Ë¤Ï¡¢\n"
-"  ¥¦¥£¥ó¥É¥¦¥º¤ò¾Ã¤·¤Æ¤·¤Þ¤Ã¤Æ¤â¤¤¤¤¤Ç¤¹¤·¡Ê¾å¤Î¡ÖÁ´¥Ç¥£¥¹¥¯¾Ãµî¡×\n"
-"  ¤«¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¡×¤ò¸«¤Æ¤¯¤À¤µ¤¤¡Ë¡¢¥¦¥£¥ó¥É¥¦¥º¤Î\n"
-"  ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥ê¥µ¥¤¥º¤¹¤ëÊýË¡¤â¤¢¤ê¤Þ¤¹¡£¥ê¥µ¥¤¥º¤Î¾ì¹ç¡¢\n"
-"  ¥Ç¡¼¥¿¤Ï¤¹¤Ù¤Æ»Ä¤ê¤Þ¤¹¡£ Mandrake Linux ¤È¥¦¥£¥ó¥É¥¦¥º¤òƱ¤¸\n"
-"  ¥Þ¥·¥ó¤Ç»È¤¤¤¿¤±¤ì¤Ð¤³¤ì¤¬¤ª¾©¤á¤Ç¤¹¡£\n"
-"\n"
-"  ¤³¤ÎÊýË¡¤òÁª¤ÖÁ°¤Ë¡¢¤³¤ì¤ò¤ä¤ë¤È¥¦¥£¥ó¥É¥¦¥º¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï\n"
-"  Á°¤è¤ê¾®¤µ¤¯¤Ê¤ë¤Î¤Ï¾µÃΤ·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"  ¤Ä¤Þ¤ê¡¢¥¦¥£¥ó¥É¥¦¥º¤Î¤Û¤¦¤Ç¤Ï¡¢¥Ç¡¼¥¿¤òÊݸ¤·¤¿¤ê¿·¤·¤¤¥½¥Õ¥È¤ò\n"
-"  ¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤È¤­¤Ë¡¢»È¤¨¤ë¶õ¤­¤¬¾¯¤Ê¤¯¤Ê¤ë¤ï¤±¤Ç¤¹¡£\n"
-"\n"
-" * ¥Ç¥£¥¹¥¯Á´ÂΤò¾Ãµî: ¥Ï¡¼¥É¥É¥é¥¤¥Ö¾å¤ÎÁ´¥Ç¡¼¥¿¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"  ¾Ãµî¤·¤Æ¡¢¿·¤·¤¯ Mandrake Linux ¤Ç¾å½ñ¤­¤·¤¿¤±¤ì¤Ð¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò\n"
-"  Áª¤Ó¤Þ¤·¤ç¤¦¡£¤³¤Î¾ì¹ç¡¢¿µ½Å¤Ë¤·¤Æ¤¯¤À¤µ¤¤¡£¤¤¤Ã¤¿¤ó³Îǧ¥Ü¥¿¥ó¤ò\n"
-"  ²¡¤·¤¿¤é¡¢¤â¤¦¤ä¤ê¤Ê¤ª¤·¤Ï¤­¤­¤Þ¤»¤ó¡£\n"
-"\n"
-" !! ¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¡¢¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤Ï¤¹¤Ù¤Æ¾Ã¤¨¤Þ¤¹¤è !!\n"
-"\n"
-" * ¥¦¥£¥ó¥É¥¦¥º¤òºï½ü: ¥É¥é¥¤¥Ö¾å¤Î¤â¤Î¤¹¤Ù¤Æ¤ò¾Ãµî¤·¤Æ¡¢Çò»æ¤Î¾õÂÖ \n"
-"¤«¤é¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤ä¤êľ¤·¤Þ¤¹¡£¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Þ¤¹¡£\n"
-"\n"
-"   !! ¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¡¢¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Þ¤¹¤è !!\n"
-"\n"
-" * ¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤ò¼êÆ°¤Ç¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤·¤¿¤±¤ì¤Ð¡¢\n"
-"  ¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£¤Ç¤â¡¢Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£¶¯ÎϤʤÀ¤±¤Ë¡¢\n"
-"  ´í¸±¤ÊÁªÂò¤Ç¤â¤¢¤ê¤Þ¤¹¡£¥Ç¥£¥¹¥¯¾å¤ÎÁ´¥Ç¡¼¥¿¤ò¤¢¤Ã¤µ¤ê¾Ã¤·¤Æ¤·¤Þ¤¨¤Þ¤¹¡£\n"
-"  ¤è¤¯¤è¤¯¤ï¤«¤Ã¤¿¤¦¤¨¤Ç¤Ê¤±¤ì¤Ð¡¢¤³¤ì¤ÏÁª¤Ð¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"¤Ï¡¼¤¤¡¢¤Ç¤­¤Þ¤·¤¿¡£¥¤¥ó¥¹¥È¡¼¥ë¤¬´°Î»¤·¤Æ¡¢GNU/Linux¥·¥¹¥Æ¥à¤¬»È¤¨¤ë\n"
-"¤è¤¦¤Ë¤Ê¤ê¤Þ¤·¤¿¤è¡£OK ¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¥·¥¹¥Æ¥à¤¬ºÆµ¯Æ°¤·¤Þ¤¹¡£¤â¤·\n"
-"¥Ç¥å¥¢¥ë¥Ö¡¼¥È¤Ë¤·¤Æ¤¤¤¿¤é¡¢¥¦¥£¥ó¥É¥¦¥º¤Ç¤âLinux¤Ç¤âÁª¤Ù¤Þ¤¹¡£\n"
-"\n"
-"¡Ö¹âÅ١ץܥ¿¥ó¡Ê¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¤Î¤ß¡Ë¤ò²¡¤¹¤È¡¢Æó¤Ä¥Ü¥¿¥ó¤¬½Ð¤Æ¤­¤Þ¤¹:\n"
-"\n"
-" * ¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤òºî¤ë: ²¿¤â¼ê½Ð¤·¤·¤Ê¤¯¤Æ¤â¼«Æ°Åª¤Ë¡¢\n"
-"¤¤¤Þ¤ä¤Ã¤¿¤Î¤È¤Û¤È¤ó¤ÉƱ¤¸¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤Æ¤¯¤ì¤ë¥Õ¥í¥Ã¥Ô¡¼¤òºîÀ®¡£\n"
-"\n"
-"   ¤³¤Î¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢Æó¤Ä¤Î¥ª¥×¥·¥ç¥ó¤¬Áª¤Ù¤Þ¤¹:\n"
-"\n"
-"    * ºÆ¸½: ¤³¤ì¤Ï¼ç¤Ë¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥óÀÚ¤ê¤À¤±¤Ï\n"
-"ÂÐÏ÷¿¤Ç¹Ô¤ï¤ì¤Þ¤¹¡£\n"
-"\n"
-"    * ¼«Æ°²½: ´°Á´¤Ë¼«Æ°²½¤µ¤ì¤¿¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤¹¡£¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Ï\n"
-"´°Á´¤Ë¾å½ñ¤­¤µ¤ì¤Æ¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Þ¤¹¡£\n"
-"\n"
-"   »÷¤¿¤è¤¦¤Ê¥Þ¥·¥ó¿¿ô¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤È¤­¤Ë¤Ï¤È¤Æ¤âÊØÍø¤Ç¤¹¡£\n"
-"ÊÀ¼Ò¤Î¥¦¥§¥Ö¥µ¥¤¥È¤Ç¡¢Auto install ¤Î¹à¤ò¸«¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-" * ¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤òÊݸ(*): ¤¤¤ÞÁª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤Î¥ê¥¹¥È¤òÊݸ¡£\n"
-"¤³¤¦¤·¤Æ¤ª¤¯¤È¡¢Ê̤Υ¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¤â¥É¥é¥¤¥Ö¤Ë¤³¤Î¥Õ¥í¥Ã¥Ô¡¼¤ò\n"
-"Æþ¤ì¤Æ¡¢¥Ø¥ë¥×²èÌÌ F1 ¤Ç ¡Ölinux defcfg=\"floppy\"¡×¤Ç¤¹¤ß¤Þ¤¹¡£\n"
-"\n"
-"(*) FAT ·Á¼°¤Î¥Õ¥í¥Ã¥Ô¡¼¤¬É¬ÍסÊGNU/Linux ¤Çºî¤ë¤Ë¤Ï¡Ömformat a:¡×\n"
-"¤È¥¿¥¤¥×¤·¤Þ¤¹¡£)"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"¿·¤·¤¯¤Ä¤¯¤Ã¤¿¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¢¤¹¤Ù¤Æ¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Ê¤¤¤È»È¤¨¤Þ¤»¤ó\n"
-"¡Ê¥Õ¥©¡¼¥Þ¥Ã¥È¤È¤Ï¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤ò¤Ä¤¯¤ë¤È¤¤¤¦¤³¤È¤Ç¤¹¡Ë¡£\n"
-"\n"
-"¤³¤³¤Ç¡¢´û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤â¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Æ¡¢Ãæ¿È¤Î¥Ç¡¼¥¿¤ò¾Ãµî\n"
-"¤·¤Æ¤ª¤¯¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤³¤Î¾ì¹ç¤Ë¤Ï¡¢¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤¿¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó\n"
-"¤âÁª¤ó¤Ç¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"Ê̤˴û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò̵Íý¤Ë¥Õ¥©¡¼¥Þ¥Ã¥È¤¹¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£\n"
-"OS ¤ÎÆþ¤Ã¤¿¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ê¤¿¤È¤¨¤Ð¡Ö/¡×¡Ö/usr¡×¡Ö/var¡×¤Ê¤É¡Ë¤Ï\n"
-"¥Õ¥©¡¼¥Þ¥Ã¥È¤¬É¬ÍפǤ¹¤¬¡¢¤È¤Ã¤Æ¤ª¤­¤¿¤¤¥Ç¡¼¥¿¤ÎÆþ¤Ã¤¿\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡ÊÄ̾ï¤Ï¡Ö/home¡×¡Ë¤Ï¤½¤Î¤Þ¤Þ¤Ç¤À¤¤¤¸¤ç¤¦¤Ö¤Ç¤¹¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥óÁª¤Ó¤Ë¤ÏÃí°Õ¤·¤Þ¤·¤ç¤¦¡£¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤¿¤é¡¢¥Ç¡¼¥¿¤Ï\n"
-"Á´Éô¾Ãµî¤µ¤ì¤Æ¡¢ÆóÅ٤ȲóÉü¤Ç¤­¤Þ¤»¤ó¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î¥Õ¥©¡¼¥Þ¥Ã¥È¤ò³«»Ï¤¹¤ë¤Ë¤Ï¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£\n"
-"\n"
-"¾¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤Ç¤½¤Á¤é¤ËMandrake Linux OS ¤òÆþ¤ì¤ë¤Ê¤é¡¢\n"
-"¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"ÉÔÎÉ¥Ö¥í¥Ã¥¯¤Î¥Á¥§¥Ã¥¯¤ò¤·¤¿¤±¤ì¤Ð¡Ö¹âÅÙ¤ÊÁªÂò¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"¿·¤·¤¤ Mandrake Linux os ¤ò¥¤¥ó¥¹¥È¡¼¥ëÃæ¤Ç¤¹¡£¤·¤Ð¤é¤¯»þ´Ö¤¬\n"
-"¤«¤«¤ê¤Þ¤¹¡Ê¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥µ¥¤¥º¤È¥³¥ó¥Ô¥å¡¼¥¿¤Î®Å٤ˤâ¤è¤ê¤Þ¤¹¡Ë¡£\n"
-"\n"
-"¤·¤Ð¤é¤¯¤ªÂÔ¤Á¤ò¡£"
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Mandrake Linux ¤ò¤¢¤Ê¤¿¤¬¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ëº¢¤Ë¤Ï¡¢¤¿¤Ö¤ó¤¤¤¯¤Ä¤«¤Î¥Ñ¥Ã¥±¡¼¥¸\n"
-"¤¬¹¹¿·¤µ¤ì¤Æ¤¤¤ë¤Ï¤º¤Ç¤¹¡£¥Ð¥°¥Õ¥£¥¯¥¹¤¬¹Ô¤ï¤ì¤¿¤ê¡¢¥»¥­¥å¥ê¥Æ¥£ÌäÂ꤬²ò·è\n"
-"¤µ¤ì¤Æ¤¤¤ë¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤³¤¦¤¤¤¦¹¹¿·¤Î²¸·Ã¤òÈï¤ë¤¿¤á¡¢¤½¤ì¤ò¥¤¥ó¥¿¡¼¥Í¥Ã"
-"¥È\n"
-"¤«¤é¥À¥¦¥ó¥í¡¼¥É¤¹¤ë¤«¤É¤¦¤«¤­¤«¤ì¤Þ¤¹¡£¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¬¤¢¤ì¤Ð¡Ö¤Ï¤¤¡×\n"
-"¤òÁª¤Ó¡¢¹¹¿·¥Ñ¥Ã¥±¡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ò¸å²ó¤·¤Ë¤¹¤ë¤Ê¤é¡Ö¤¤¤¤¤¨¡×¤òÁª¤Ó¤Þ"
-"¤¹¡£\n"
-"\n"
-"¡Ö¤Ï¤¤¡×¤òÁª¤Ö¤È¡¢¹¹¿·¥Ñ¥Ã¥±¡¼¥¸¤ÎÃÖ¤«¤ì¤¿¾ì½ê°ìÍ÷¤¬É½¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"ºÇ´ó¤ê¤Î¾ì½ê¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤¹¤ë¤È¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¥Ä¥ê¡¼¤¬É½¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"²¿¤¬Áª¤Ð¤ì¤¿¤«³Îǧ¤·¤Þ¤·¤ç¤¦¡£¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¤ò²¡¤¹¤È¡¢ÁªÂò¥Ñ¥Ã¥±¡¼¥¸\n"
-"¤¬Æɤ߹þ¤ß¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£¡Ö¥­¥ã¥ó¥»¥ë¡×¤ÇÃæÃǤǤ¹¡£"
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Àè¤Ë¿Ê¤àÁ°¤Ë¥é¥¤¥»¥ó¥¹¾ò·ï¤ò¿µ½Å¤ËÆɤó¤Ç¤¯¤À¤µ¤¤¡£¤³¤ì¤Ï Mandrake Linux\n"
-"Á´ÂΤò¥«¥Ð¡¼¤¹¤ë¤â¤Î¤Ç¤¹¡£°ì¤Ä¤Ç¤âƱ°Õ¤Ç¤­¤Ê¤¤¾ò¹à¤¬¤¢¤ì¤Ð¡¢¡ÖµñÈÝ¡×\n"
-"¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£¤¹¤ë¤È¥¤¥ó¥¹¥È¡¼¥ë¤¬¤¹¤°¤Ë½ª¤ï¤ê¤Þ¤¹¡£¥¤¥ó¥¹¥È¡¼¥ë¤ò\n"
-"³¤±¤ë¤Ë¤Ï¡¢¡ÖƱ°Õ¤¹¤ë¡×¥Ü¥¿¥ó¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"¤µ¤Æ¡¢¤³¤ó¤É¤Ï¤³¤Î¥Þ¥·¥ó¤Ëµá¤á¤ë¥»¥­¥å¥ê¥Æ¥£¿å½à¤òÁª¤ÖÃʳ¬¤Ç¤¹¡£¸¶Â§¤È¤·¤Æ\n"
-"¥Þ¥·¥ó¤¬³°Éô¤Ë¤µ¤é¤µ¤ì¤Æ¤¤¤ëÅٹ礤¤¬¹â¤¤¤Û¤É¡¢¤½¤·¤Æ¥Þ¥·¥óÆâ¤Î¥Ç¡¼¥¿¤Î½ÅÍ×\n"
-"À­¤¬¹â¤¤¤Û¤É¡¢¥»¥­¥å¥ê¥Æ¥£¿å½à¤â¹â¤¯¤·¤Þ¤¹¡£\n"
-"¤Ç¤â¡¢¹â¤¤¥»¥­¥å¥ê¥Æ¥£¤Ï¡¢°ìÈ̤˥ޥ·¥ó¤Î»È¤¤¤ä¤¹¤µ¤òµ¾À·¤Ë¤·¤Þ¤¹¡£\n"
-"³Æ¿å½à¤Ë¤Ä¤¤¤Æ¾Ü¤·¤¯¤Ï¡¢¥ì¥Õ¥¡¥ì¥ó¥¹¥Þ¥Ë¥å¥¢¥ë¤Î MSEC ¤Î¾Ï¤ò»²¾È¤Î¤³¤È¡£\n"
-"\n"
-"²¿¤òÁª¤Ù¤Ð¤¤¤¤¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£"
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"¤µ¤Æ¤³¤³¤Ç¡¢¿·¤·¤¤ Mandrake Linux ¥·¥¹¥Æ¥à¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¤É¤Î\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò»È¤¦¤«»ØÄꤷ¤Þ¤¹¡£¤â¤·¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬ÄêµÁºÑ¤ß¤Ê¤é\n"
-"¡ÊÁ°¤Ë GNU/Linux ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤³¤È¤¬¤¢¤Ã¤¿¤êÊ̤Υġ¼¥ë¤ò»È¤Ã¤¿\n"
-"¤ê¤·¤¿¾ì¹ç¡Ë¡¢¤½¤ì¤ò¤½¤Î¤Þ¤Þ»È¤¦¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤½¤ì°Ê³°¤Ï¡¢\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥óÄêµÁ¤¬É¬ÍפǤ¹¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¤Ë¤Ï¡¢¤Þ¤º¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤òÁª¤Ó¤Þ¤¹¡£¤â¤·\n"
-"ºÇ½é¤Î IDE ¥É¥é¥¤¥Ö¤òÁª¤Ö¤Ê¤é¡Öhda¡×¡¢ÆóÈÖÌܤΠIDE ¤Ê¤é¡Öhdb¡×¡¢\n"
-"ºÇ½é¤Î SCSI ¥Ç¥£¥¹¥¯¤Ê¤é¡Ösda¡×¤È¤¤¤¦¶ñ¹ç¤Ë¥¯¥ê¥Ã¥¯¤·¤ÆÁª¤Ó¤Þ¤¹¡£\n"
-"\n"
-"¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤Ë¤Ï¡¢°Ê²¼¤Î¥ª¥×¥·¥ç¥ó¤¬»È¤¨¤Þ¤¹:\n"
-"\n"
-"   * ¡ÖÁ´¾Ãµî¡×: Áª¤ó¤À¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤ÎÁ´¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾Ãµî¤·¤Þ¤¹¡£\n"
-"\n"
-"   * ¡Ö¼«Æ°³ä¤êÅö¤Æ¡×: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¶õ¤­Éôʬ¤Ë¡¢¼«Æ°Åª¤Ë Ext2 ¤È\n"
-"     ¥¹¥ï¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ê¤Þ¤¹¡£\n"
-"\n"
-"   * ¡Ö¤â¤Ã¤È¡×: ¤µ¤é¤ËÄɲõ¡Ç½¤Ë¥¢¥¯¥»¥¹¤Ç¤­¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹:\n"
-"\n"
-"   * ¡Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÊݸ¡×: ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ò¥Õ¥í¥Ã¥Ô¡¼\n"
-"     ¤ËÊݸ¤·¤Þ¤¹¡£¸åÆü¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë½¤Éü¤¬É¬ÍפʤȤ­¤ËÊØÍø¤Ç¤¹¡£\n"
-"     ¤³¤ì¤ÏÀ§Èó¤ä¤Ã¤Æ¤ª¤¯¤è¤¦¤ª´«¤á¤·¤Þ¤¹¡£\n"
-"\n"
-"   * ¡Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÉü¸µ¡×: Á°¤Ë¥Õ¥í¥Ã¥Ô¡¼¤ËÊݸ¤·¤¿¥Ñ¡¼¥Æ¥£¥·¥ç"
-"¥ó\n"
-"     ¥Æ¡¼¥Ö¥ë¤òÉü¸µ¤·¤Þ¤¹¡£\n"
-"\n"
-"   * ¡Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë½¤Éü¡×: ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤¬Ç˲õ¤µ¤ì\n"
-"     ¤¿¤é¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤Ç¤½¤ì¤ò½¤Éü¤·¤Æ¤ß¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£\n"
-"     ¿µ½Å¤Ë»È¤Ã¤Æ¡¢¤³¤ì¤¬Ëüǽ¤Ç¤Ê¤¤¤³¤È¤Ï¾µÃΤ·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"    * ¡Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ëºÆÆɹþ¡×: Êѹ¹¤ò¤¹¤Ù¤Æ¼Î¤Æ¤Æ¡¢ºÇ½é¤Î\n"
-"      ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ËÌ᤹\n"
-"\n"
-"    * ¡Ö¥ê¥à¡¼¥Ð¥Ö¥ë¥á¥Ç¥£¥¢¤Î¼«Æ°¥Þ¥¦¥ó¥È¡×: ¤³¤Î¥ª¥×¥·¥ç¥ó¤Î¥Á¥§¥Ã¥¯¤ò\n"
-"      ¤Ï¤º¤¹¤È¡¢¥æ¡¼¥¶¤Ï¼êÆ°¤Ç¥ê¥à¡¼¥Ð¥Ö¥ë¥á¥Ç¥£¥¢¡¢¤¿¤È¤¨¤Ð¥Õ¥í¥Ã¥Ô¡¼¤ä \n"
-"      CD-ROM¤ò¼êÆ°¤Ç¥Þ¥¦¥ó¥È/¥¢¥ó¥Þ¥¦¥ó¥È¤¹¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö¥¦¥£¥¶¡¼¥É¡×: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥¦¥£¥¶¡¼¥É¤ò»È¤¦¤È¤­¤Î\n"
-"¥ª¥×¥·¥ç¥ó¤Ç¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¤Ä¤¤¤Æ¤ÎÃ챤¬¤Ê¤¤¿Í¤Ï¡¢¤³¤ì¤¬¤ª¾©¤á¤Ç¤¹¡£\n"
-"\n"
-" * ¡Ö¼è¤ê¾Ã¤·¡×: ¤³¤Î¥ª¥×¥·¥ç¥ó¤ò»È¤Ã¤ÆÊѹ¹¤ò¼è¤ê¾Ã¤·¤Þ¤¹¡£\n"
-"\n"
-" * ¡ÖÄ̾ï/¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¤Ø¤ÎÀÚ¤êÂؤ¨¡×: ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ËÂФ·¤ÆÄɲäÎ\n"
-"»ØÄ꤬¤Ç¤­¤ë¤Ã¤è¤¦¤Ë¤Ê¤ë¡Ê¼ïÎà¡¢¥ª¥×¥·¥ç¥ó¡¢¥Õ¥©¡¼¥Þ¥ó¥È¤Ê¤É¡Ë¡£¤Þ¤¿¾ðÊó¤â\n"
-"¾Ü¤·¤¯É½¼¨¤µ¤ì¤ë¡£\n"
-"\n"
-" * ¡Ö´°Î»¡×: ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥óÀڤ꤬½ª¤ï¤Ã¤¿¤é¡¢¤³¤Î¥ª¥×¥·¥ç¥ó"
-"¤ò\n"
-"»È¤Ã¤ÆÊѹ¹¤òÊݸ¤·¤Þ¤¹¡£\n"
-"\n"
-"»²¹Í¤Þ¤Ç¤Ë¡¢¥­¡¼¥Ü¡¼¥É¤«¤é³Æ¥ª¥×¥·¥ç¥ó¤¬Áª¤Ù¤Þ¤¹¡£¥¿¥Ö¤È¾å²¼Ìð°õ¤ò»È¤Ã¤Æ\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤À¤é¡¢°Ê²¼¤¬»È¤¨¤Þ¤¹:\n"
-"\n"
-"     * Ctrl-c¡§¿·µ¬¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¡Ê¶õ¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤À¤È¤­)\n"
-"\n"
-"     * Ctrl-d¡§¥Ñ¡¼¥Æ¥£¥·¥ç¥óºï½ü\n"
-"\n"
-"     * Ctrl-m¡§¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤ò¥»¥Ã¥È\n"
-"\n"
-"PPC ¥Þ¥·¥ó¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤ë¾ì¹ç¤Ë¤Ï¡¢yaboot ¥Ö¡¼¥È¥í¡¼¥ÀÍѤˡ¢\n"
-"ºÇÄã 1 MB ¤Î¾®¤µ¤Ê HFS¡Ö¥Ö¡¼¥È¥¹¥È¥é¥Ã¥×¡×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤ê¤Þ¤·¤ç¤¦¡£\n"
-"¤³¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¡¢¤¿¤È¤¨¤Ð 50 MB ¤È¤«Â礭¤á¤Ë¤·¤Æ¤ª¤¯¤È¡¢¤½¤³¤ËͽÈ÷¤Î\n"
-"¥«¡¼¥Í¥ë¤äramdisk ¥¤¥á¡¼¥¸¤òÊݸ¤·¤Æ¤ª¤±¤Æ¡¢¶ÛµÞµ¯Æ°¤Ë»È¤¨¤ÆÊØÍø¤Ç¤¹¡£"
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"¥¦¥£¥ó¥É¥¦¥º¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¤¤¯¤Ä¤«¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Ë¸«¤Ä¤«¤ê¤Þ¤·¤¿¡£\n"
-"Mandrake Linux OS ¤Î¥¤¥ó¥¹¥È¡¼¥ëÍѤ˥ꥵ¥¤¥º¤·¤¿¤¤¤â¤Î¤òÁª¤ó¤Ç\n"
-"¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"³Æ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï°Ê²¼¤Î½ñ¼°¤Ç¤¹: ¡ÖLinux̾¡×¡Ö¥¦¥£¥ó¥É¥¦¥ºÌ¾¡×¡ÖÍÆÎÌ¡×\n"
-"\n"
-"¡ÖLinux ̾¡×¤Ï¼¡¤Î½ñ¼°¤Ç¤¹: ¡Ö¥Ï¡¼¥É¥Ç¥£¥¹¥¯¼ïÎà¡×¡Ö¥É¥é¥¤¥ÖÈÖ¹æ¡×\n"
-"¡Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥óÈÖ¹æ¡×¡Ê¤¿¤È¤¨¤Ð¡Öhda1¡×)\n"
-"\n"
-"\n"
-"¡Ö¥Ï¡¼¥É¥Ç¥£¥¹¥¯¼ïÎà¡×¤Ï¡¢IDE ¥Ç¥£¥¹¥¯¤Ê¤é¡Öhd¡×¤Ç¡¢SCSI ¤Ê¤é¡Ösd¡×\n"
-"¤Ç¤¹¡£\n"
-"\n"
-"\n"
-"¡Ö¥É¥é¥¤¥ÖÈÖ¹æ¡×¤Ï¡¢¡Öhd¡×¤ä¡Ösd¡×¤Î¸å¤Ë¤Ä¤¯Ê¸»ú¤Ç¤¹¡£IDE¤Ê¤é:\n"
-"\n"
-"   * ¡Öa¡×¤Ï¥×¥é¥¤¥Þ¥ê¥³¥ó¥È¥í¡¼¥é¾å¤Î¥Þ¥¹¥¿¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öb¡×¤Ï¥×¥é¥¤¥Þ¥ê¥³¥ó¥È¥í¡¼¥é¾å¤Î¥¹¥ì¡¼¥Ö¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öc¡×¤Ï¥»¥«¥ó¥À¥êIDE¥³¥ó¥È¥í¡¼¥é¾å¤Î¥Þ¥¹¥¿¥Ç¥£¥¹¥¯\n"
-"\n"
-"   * ¡Öd¡×¤Ï¥»¥«¥ó¥À¥êIDE¥³¥ó¥È¥í¡¼¥é¾å¤Î¥¹¥ì¡¼¥Ö¥Ç¥£¥¹¥¯\n"
-"\n"
-"\n"
-"SCSI ¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¾ì¹ç¡¢¡Öa¡×¤¬SCSI IDÈÖ¹æºÇ¾®¤Î¥Ç¥£¥¹¥¯¡¢\n"
-"¡Öb¡×¤Ï¤½¤Î¼¡¤ÎIDÈֹ桢¤È¤¤¤¦¶ñ¹ç¤Ç¤¹\n"
-"¡Ö¥¦¥£¥ó¥É¥¦¥ºÌ¾¡×¤Ï¡¢¥¦¥£¥ó¥É¥¦¥º¤Ç¤Î¥É¥é¥¤¥Öʸ»ú¤Ç¤¹¡ÊºÇ½é¤Î¥Ç¥£¥¹¥¯\n"
-"¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡ÖC:¡×¥É¥é¥¤¥Ö¤Ç¤¹)¡£"
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "¤·¤Ð¤é¤¯¤ªÂÔ¤Á¤ò¡£¤³¤ÎÁàºî¤Ï¤·¤Ð¤é¤¯¤«¤«¤ê¤Þ¤¹¤Î¤Ç¡£"
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX¤Ï¤³¤ó¤É¤Ï¡¢¤É¤ó¤Ê¼ïÎà¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤¿¤¤¤«¿Ò¤Í¤Þ¤¹¡£¥Ç¥Õ¥©¥ë¥È\n"
-"¡Ê¿ä¾©¡Ë¥¤¥ó¥¹¥È¡¼¥ë¤«¡¢¤â¤Ã¤È¥³¥ó¥È¥í¡¼¥ë¤·¤¿¤¤¤«¡Ê¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×¡Ë\n"
-"¤Ç¤¹¡£¤Þ¤¿¿·µ¬¥¤¥ó¥¹¥È¡¼¥ë¤«´û¸¤ÎMandrake Linux¤ò¹¹¿·¤¹¤ë¤Î¤«¤âÁª¤Ù¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡× ¸Å¤¤¥·¥¹¥Æ¥à¤ò´°Á´¤Ë¾Ãµî¤·¤Þ¤¹¡£¼Â¤Ï¡¢¤¤¤Þ¤Î¥Þ¥·¥ó¤Î\n"
-"¼ïÎà¤Ë¤è¤Ã¤Æ¤Ï¡¢¸Å¤¤¡ÊLinux¤Î¤ß¤Ê¤é¤ºÂ¾¤Î¡Ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÊѹ¹¤·¤Ê¤¤¤Þ¤Þ\n"
-"Êݸ¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö¹¹¿·¡× ¤³¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹¤Ç¤Ï¡¢¤¤¤Þ¤Î Mandrake Linux ¥·¥¹¥Æ¥à\n"
-"¾å¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¹¹¿·¤¹¤ë¤À¤±¤Ç¤¹¡£¥Ï¡¼¥É¥É¥é¥¤¥Ö¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ä³Æ¼ï\n"
-"¥æ¡¼¥¶¤Ë¤è¤ëÀßÄê¤Ï»Ä¤ê¤Þ¤¹¡£¤½¤ì°Ê³°¤ÏÄ̾磻¥ó¥¹¥È¡¼¥ë¤È¤Þ¤Ã¤¿¤¯Æ±¤¸\n"
-"ÁªÂò»è¤¬ÆÀ¤é¤ì¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö¥Ñ¥Ã¥±¡¼¥¸¤Î¤ß¹¹¿·¡× ¤³¤Î¿·¤·¤¤¥¯¥é¥¹¤Ï¡¢´û¸ Mandrake Linux ¤ò¹¹¿·\n"
-"¤·¤Ä¤Ä¡¢¤¤¤Þ¤Þ¤Ç¤Î¥·¥¹¥Æ¥àÀßÄê¤ÏÊѤ¨¤Þ¤»¤ó¡£¥«¥ì¥ó¥È¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ËÂФ·¤Æ\n"
-"¿·¤·¤¤¥Ñ¥Ã¥±¡¼¥¸¤òÄɲ乤ë¤È¤­¤â¤³¤³¤Ç¤¹¡£\n"
-"\n"
-"Mandrake Linux8.1°Ê¹ß¤ò¹¹¿·¤·¤¿¤¤¤Î¤Ê¤é¡Ö¹¹¿·¡×¤Ç¤À¤¤¤¸¤ç¤¦¤Ö¤Ç¤·¤ç¤¦¡£\n"
-"\n"
-"GNU/Linux ¤Ø¤Î½¬½ÏÅ٤˱þ¤¸¤Æ¡¢°Ê²¼¤Î¥¤¥ó¥¹¥È¡¼¥ë¡¦¹¹¿·¥ì¥Ù¥ë¤¬\n"
-"Áª¤Ù¤Þ¤¹:\n"
-"\n"
-"* ¿ä¾©: GNU/Linux  ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤Ê¤é¤³¤ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"¤¦¤ë¤µ¤¤¼ÁÌä¤â¤¢¤Þ¤ê¤Ê¤¯¡¢¤È¤Æ¤â´Êñ¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"* ¥¨¥­¥¹¥Ñ¡¼¥È: GNU/Linux ¤Ë¾Ü¤·¤¤¿Í¤Ï¡¢¤³¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹¤ò\n"
-"Áª¤Ù¤Þ¤¹¡£¤­¤ï¤á¤Æ¥«¥¹¥¿¥à²½¤·¤¿¥¤¥ó¥¹¥È¡¼¥ë¤¬¤Ç¤­¤Þ¤¹¡£\n"
-"GNU/Linux¤Ë¤Ä¤¤¤Æ¤è¤Û¤É¾Ü¤·¤¯¤Ê¤¤¤È¡¢¤Ê¤«¤Ê¤«Åú¤¨¤é¤ì¤Ê¤¤¼ÁÌ䤬\n"
-"¤¢¤ê¤Þ¤¹¡£¤ï¤«¤Ã¤¿¿Í°Ê³°¤Ï¡¢¤³¤Î¥¯¥é¥¹¤ÏÁª¤Ð¤Ê¤¤¤³¤È¡£"
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"¤Õ¤Ä¤¦¡¢drakX¤Ï¤¢¤Ê¤¿ÍѤÎÀµ¤·¤¤¥­¡¼¥Ü¡¼¥É¤ò¼«Æ°Åª¤ËÁª¤Ó¤Þ¤¹¡Ê¸À¸ì¤ÎÁªÂò\n"
-"¤ò¤â¤È¤ËȽÃǤ·¤Þ¤¹¡Ë¡£¤À¤«¤é¤³¤Î¥¹¥Æ¥Ã¥×¤Ï¤Õ¤Ä¤¦¤Ï½Ð¤Æ¤­¤Þ¤»¤ó¡£¤¬¡¢¼«Ê¬\n"
-"¤Î¸À¸ì¤Ë¤­¤Ã¤Á¤êÂбþ¤·¤¿¥­¡¼¥Ü¡¼¥É¤ò»È¤Ã¤Æ¤¤¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤¿¤È¤¨¤Ð\n"
-"±Ñ¸ì¤òÏä¹¥¹¥¤¥¹¿Í¤Ê¤é¡¢¥­¡¼¥Ü¡¼¥É¤Ï¥¹¥¤¥¹¼°¤Î¤Û¤¦¤¬¤¤¤¤¤È»×¤¦¤«¤â¤·¤ì¤Þ\n"
-"¤»¤ó¡£¤¢¤ë¤¤¤Ï±Ñ¸ì¤Ä¤«¤¤¤Ç¤â¥±¥Ù¥Ã¥¯ºß½»¤Ê¤é¡¢»÷¤¿¾õ¶·¤Ë¤Ê¤ë¤Ç¤·¤ç¤¦¡£\n"
-"¤¤¤º¤ì¤Î¾ì¹ç¤Ç¤â¡¢¤³¤Î¥¤¥ó¥¹¥È¡¼¥ëÃʳ¬¤ËÌá¤Ã¤Æ¡¢°ìÍ÷¤«¤éŬÀڤʥ­¡¼¥Ü¡¼¥É\n"
-"¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¡Ö¤â¤Ã¤È¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¥µ¥Ý¡¼¥È¤µ¤ì¤ë¥­¡¼¥Ü¡¼¥É¤¬¤¹¤Ù¤Æɽ¼¨¤µ¤ì¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ë¤È¥·¥¹¥Æ¥àÍøÍѤǻȤ¦¸À¸ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¡Ö¹âÅÙ¤ÊÁªÂò¡×¥Ü¥¿¥ó¤Ç¡¢¤Û¤«¤Î¸À¸ì¤âÁª¤Ù¤Þ¤¹¡£¤³¤ì¤Ï¥Þ¥·¥ó¤ËÆþ¤Ã¤Æ¡¢¸å¤Ç\n"
-"ɬÍפ˱þ¤¸¤Æ»È¤¨¤Þ¤¹¡£¤¿¤È¤¨¤Ð¤³¤Î¥Þ¥·¥ó¤ò¥¹¥Ú¥¤¥ó¤Î¿Í¤Ë¤â»È¤Ã¤Æ¤â¤é¤¦¤Ê\n"
-"¤é¡¢¥Ä¥ê¡¼É½¼¨¤Î¼çÍ׸À¸ì¤Ë¤Ï±Ñ¸ì¤òÁª¤ó¤Ç¡¢¡Ö¹âÅÙ¤ÊÁªÂò¡×¤Ç¥¹¥Ú¥¤¥ó¸ì/¥¹\n"
-"¥Ú¥¤¥ó¤ËÂбþ¤¹¤ë¥Ü¥Ã¥¯¥¹¤Ë¥Á¥§¥Ã¥¯¤òÆþ¤ì¤Þ¤¹¡£\n"
-"\n"
-"¸À¸ì¤ÏÊ£¿ôÁª¤Ù¤Þ¤¹¡£ÄɲäθÀ¸ì¡Ê¥í¥±¡¼¥ë¡Ë¤òÁª¤ó¤Ç¡¢OK¤ò²¡¤·¤Æ³Îǧ¤·¤¿¤é¡¢\n"
-"¼«Æ°Åª¤Ë¼¡¤Î¥¹¥Æ¥Ã¥×¤Ë¿Ê¤ß¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"¥Ç¥Õ¥©¥ë¥È¤À¤È¡¢DrakX ¤Ï£²¥Ü¥¿¥ó¥Þ¥¦¥¹¤òÁÛÄꤷ¤Æ¡¢Ãæ±û¥Ü¥¿¥ó¤ò¥¨¥ß¥å¥ì¡¼¥È\n"
-"¤¹¤ëÀßÄê¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£DrakX ¤Ï¡¢¤½¤ì¤¬PS/2¥Þ¥¦¥¹¤«USB¥Þ¥¦¥¹¤«¤ò¼«Æ°È½Äê\n"
-"¤·¤Þ¤¹¡£\n"
-"\n"
-"Ê̼ï¤Î¥Þ¥¦¥¹¤ò»ØÄꤹ¤ë¤Ë¤Ï¡¢°ìÍ÷¤«¤éÊ̤Υޥ¦¥¹¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¥Ç¥Õ¥©¥ë¥È°Ê³°¤Î¥Þ¥¦¥¹¤òÁª¤ó¤À¤é¡¢¥Þ¥¦¥¹¤Î¥Æ¥¹¥È²èÌ̤¬½Ð¤Æ¤­¤Þ¤¹¡£\n"
-"¥Ü¥¿¥ó¤ä¥Û¥¤¡¼¥ë¤ò»È¤Ã¤Æ¤ß¤Æ¡¢¤³¤ÎÀßÄê¤Ç¤¤¤¤¤«¤ò³Îǧ¤·¤Þ¤·¤ç¤¦¡£¤¦¤Þ¤¯\n"
-"Æ°¤«¤Ê¤±¤ì¤Ð¡¢¥¹¥Ú¡¼¥¹¤«¡Ö¥ê¥¿¡¼¥ó¡×¤ò²¡¤·¤Æ¥­¥ã¥ó¥»¥ë¤·¤Æ¡¢Áª¤Ó¤Ê¤ª¤·\n"
-"¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Àµ¤·¤¤¥Ý¡¼¥È¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤¿¤È¤¨¤Ð¡¢MS ¥¦¥£¥ó¥É¥¦¥º¤Ç¤Î\n"
-"COM1¥Ý¡¼¥È¤Ï¡¢GNU/Linux¤Ç¤Ï ttyS0 ¤È¤¤¤¦Ì¾Á°¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"¤µ¤¢¡¢GNU/Linux¥·¥¹¥Æ¥à¤Î¥»¥­¥å¥ê¥Æ¥£¾å¤Ç°ìÈ֤Υ­¥â¤Ë¤ä¤Ã¤Æ¤­¤Þ¤·¤¿¡£\n"
-"root ¥Ñ¥¹¥ï¡¼¥É¤ÎÁªÂò¤Ç¤¹¡£root ¤Ï¥·¥¹¥Æ¥à´ÉÍý¼Ô¤Ç¡¢¥·¥¹¥Æ¥à¤ò¹¹¿·¤·\n"
-"¤¿¤ê¡¢¥æ¡¼¥¶¤òÄɲä·¤¿¤ê¡¢¥·¥¹¥Æ¥àÁ´ÂΤÎÀßÄê¤òÊѤ¨¤¿¤ê¤Ç¤­¤ëÍ£°ì¤Î¸ºß\n"
-"¤Ç¤¹¡£root ¤Ï¤³¤Î¥·¥¹¥Æ¥à¤Ç¤ÏËüǽ¤Ê¤Î¤Ç¤¹¡ª\n"
-"¤À¤«¤é¤³¤½¡¢Â¾¿Í¤Ë¿ä¬¤µ¤ì¤Ê¤¤¥Ñ¥¹¥ï¡¼¥ÉÁª¤Ó¤¬É¬ÍפǤ¹¡£´Êñ¤¹¤®¤¿¤é\n"
-"drakX ¤¬·Ù¹ð¤·¤Þ¤¹¡£¤³¤³¤Ç¼¨¤¹¤è¤¦¤Ë¡¢¥Ñ¥¹¥ï¡¼¥É¤òÆþÎϤ·¤Ê¤¤¤³¤È¤Ï²Äǽ\n"
-"¤Ç¤¹¤¬¡¢¤Ç¤âÀßÄꤹ¤ë¤³¤È¤ò¶¯¤¯¤ª´«¤á¤·¤Þ¤¹¡£¤½¤¦¤¹¤Ù¤­Íýͳ¤¬°ì¤Ä¡§\n"
-"GNU/Linux ¤òµ¯Æ°¤·¤¿¤«¤é¤È¤¤¤Ã¤Æ¡¢¤Û¤«¤Î¥ª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤¬\n"
-"²¿¤ò¤ä¤Ã¤Æ¤â̵»ö¤È»×¤Ã¤Á¤ã¤¤¤±¤Ê¤¤¡¢¤È¤¤¤¦¤³¤È¤Ç¤¹¡£root¤Ê¤é¤¢¤é¤æ¤ë\n"
-"À©¸Â¤òÆÍÇˤ·¤Æ¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤½¤Î¤â¤Î¤ò¥¢¥¯¥»¥¹¤·¤Æ¡¢Á´¥Ç¥£¥¹¥¯¤Î\n"
-"¥Ç¡¼¥¿¤ò¤¦¤Ã¤«¤êºï½ü¤·¤Æ¤·¤Þ¤¨¤Þ¤¹¡ª ¤À¤«¤é¡¢root¤Ë¤Ê¤ë¤Î¤Ï¤à¤º¤«¤·¤¯\n"
-"¤·¤Æ¤ª¤¯¤Î¤¬Âç»ö¤Ç¤¹¡£\n"
-"\n"
-"¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢¥¢¥ë¥Õ¥¡¥Ù¥Ã¥È¤È¿ô»ú¤òº®¤¼¤¿¤â¤Î¤Ç¡¢ºÇÄã¤Ç¤â8ʸ»ú¤¬\n"
-"ɬÍפǤ¹¡£·è¤·¤Æ½ñ¤­Î±¤á¤¿¤ê¤·¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢Ä¹¤¹¤®¤¿¤ê¤ä¤ä¤³¤·¤¹¤®¤¿¤ê¤·¤Æ¤â¤¤¤±¤Þ¤»¤ó¡£³Ú¤Ë³Ð¤¨\n"
-"¤Æ¤ª¤±¤ë¤â¤Î¤Ë¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"¥Ñ¥¹¥ï¡¼¥É¤ÏÆó²óÆþÎϤ·¤Þ¤¹¡£¤³¤Î¤È¤­¤Ë¤Þ¤Á¤¬¤¤¤ò¤¹¤ë¤È¡¢¤Þ¤Á¤¬¤Ã¤¿\n"
-"¤â¤Î¤¬ÅÐÏ¿¤µ¤ì¤Æ¤·¤Þ¤¦¤Î¤Ç¡¢º¤¤Ã¤¿¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê¤Ë¤è¤Ã¤Æ¤Ï¡¢NIS ¤ò»È¤¦¤«¤â¤·¤ì¤Þ¤»¤ó¡£\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¥·¥¹¥Æ¥à´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£NIS¤ò»È¤¦¾ì¹ç¤Ë¤Ï\n"
-"¡ÖNIS¤ò»È¤¦¡×¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡£¡ÖOK¡×¤ò²¡¤·¤¿¤é¡¢É¬ÍפʾðÊó\n"
-"¤òÆþÎϤ·¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO ¤È GRUB ¤Ï GNU/Linux ¤Îµ¯Æ°¤Ë»È¤ï¤ì¤ë¥Ö¡¼¥È¥í¡¼¥À¤Ç¤¹¡£¤³¤ÎÃʳ¬¤Ï\n"
-"¤Õ¤Ä¤¦¡¢´°Á´¤Ë¼«Æ°²½¤µ¤ì¤Æ¤¤¤Þ¤¹¡£DrakX¤Ï¥Ç¥£¥¹¥¯¤Î¥Ö¡¼¥È¥»¥¯¥¿¤òʬÀϤ·¤Æ\n"
-"¤½¤Î·ë²Ì¤Ë±þ¤¸¤ÆÂбþ¤¹¤ë¤è¤¦¤Ë¤·¤Þ¤¹:\n"
-"\n"
-" * ¤â¤·¥¦¥£¥ó¥É¥¦¥º¤Î¥Ö¡¼¥È¥»¥¯¥¿¤¬¤¢¤ì¤Ð¡¢¤½¤ì¤Ï GRUB/LILO ¥Ö¡¼¥È\n"
-"¥»¥¯¥¿¤Ë½ñ¤­´¹¤¨¤é¤ì¡¢GNU/Linux ¤È Windows¤ÎξÊý¤¬µ¯Æ°²Äǽ¤Ë¤Ê¤ë;\n"
-"\n"
-" * ¤â¤· GRUB ¤« LILO ¥Ö¡¼¥È¥»¥¯¥¿¤¬¸«¤Ä¤«¤ì¤Ð¡¢ºÇ¿·ÈǤ˹¹¿·;\n"
-"\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢drakX ¤Ï³Æ¼ï¥ª¥×¥·¥ç¥ó¤òµó¤²¤¿¥À¥¤¥¢¥í¥°¤òɽ¼¨¤·¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö»È¤¦¥Ö¡¼¥È¥í¡¼¥À¡×: ÁªÂò»è¤Ï3¤Ä¤¢¤ê¤Þ¤¹:\n"
-"\n"
-"    * ¡ÖLILO¡¢¥°¥é¥Õ¥£¥Ã¥¯¥á¥Ë¥å¡¼¤Ä¤­¡×: ¥°¥é¥Õ¥£¥Ã¥¯¥á¥Ë¥å¡¼¤Ä¤­¤Î LILO ¤¬"
-"¤è¤±¤ì¤Ð¤³¤ì¤ò¡£\n"
-"\n"
-"    * ¡ÖGrub¡×: GRUB (¥Æ¥­¥¹¥È¥á¥Ë¥å¡¼)¤Î¾ì¹ç¡£\n"
-"\n"
-"    * ¡ÖLILO ¥Æ¥­¥¹¥È¥á¥Ë¥å¡¼¡×: ¥Æ¥­¥¹¥È¥á¥Ë¥å¡¼¤Ä¤­ LILO ¤Î¾ì¹ç¡£\n"
-"\n"
-" * ¡Ö¥Ö¡¼¥È¥Ç¥Ð¥¤¥¹¡×: ¤Û¤È¤ó¤É¤Ï¡¢¥Ç¥Õ¥©¥ë¥È (/dev/hda) ¤Î¤Þ¤Þ¤Ç¤¹¤¬\n"
-"¾ì¹ç¤Ë¤è¤Ã¤Æ¤Ï¥Ö¡¼¥È¥í¡¼¥À¤òÆóÈÖÌܤΥϡ¼¥É¥Ç¥£¥¹¥¯ (/dev/hdb)¤ä¡¢\n"
-"¥Õ¥í¥Ã¥Ô¡¼¥Ç¥£¥¹¥¯¤ËÃÖ¤±¤Þ¤¹ (/dev/fd0)¡£\n"
-"\n"
-" * ¡Ö¥Ç¥Õ¥©¥ë¥È¥¤¥á¡¼¥¸µ¯Æ°¤ÎÂÔ¤Á»þ´Ö¡×: ¥³¥ó¥Ô¥å¡¼¥¿¤òºÆµ¯Æ°¤·¤¿¤È¤­¡¢\n"
-"¥Ö¡¼¥È¥í¡¼¥À¤Î¥Ç¥Õ¥©¥ë¥È°Ê³°¤Î¥á¥Ë¥å¡¼¤òÁª¤Ö¤¿¤á¤Î»þ´Ö¤ò»ØÄꤷ¤Þ¤¹¡£\n"
-"\n"
-"!! ¥Ö¡¼¥È¥í¡¼¥À¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Ê¤¤¤È¡Ê¤³¤³¤Ç¡Ö¥­¥ã¥ó¥»¥ë¡×¤òÁª¤ó¤À\n"
-"¾ì¹ç¡Ë¡¢¤Û¤«¤ËMandrake Linux¤òµ¯Æ°¤¹¤ëÊýË¡¤ò³ÎÊݤ¹¤ë¤Î¤ò˺¤ì¤Ê¤¤¤Ç\n"
-"¤¯¤À¤µ¤¤¡ª\n"
-"¤Þ¤¿¡¢¤³¤³¤Ç¤Î¥ª¥×¥·¥ç¥ó¤òÊѤ¨¤ë¤Î¤Ï¡¢¤½¤Î°ÕÌ£¤¬Ê¬¤«¤Ã¤Æ¤¤¤ë¿Í¤À¤±¤Ë\n"
-"¤·¤Æ¤¯¤À¤µ¤¤ !!\n"
-"\n"
-"¤³¤Î¥À¥¤¥¢¥í¥°¤Ç¡Ö¹âÅÙ¤ÊÁªÂò¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¹âÅ٤ʥ桼¥¶ÀìÍѤÎ\n"
-"³Æ¼ï¾ÜºÙ¥ª¥×¥·¥ç¥ó¤¬½Ð¤Æ¤­¤Þ¤¹¡£\n"
-"\n"
-"ÈÆÍÑ¥Ö¡¼¥È¥í¡¼¥À¤Î¥Ñ¥é¥á¡¼¥¿¤òÀßÄꤷ¤¿¤é¡¢¤³¤ó¤É¤Ïµ¯Æ°»þ¤ËÁª¤Ù¤ë\n"
-"¥Ö¡¼¥È¥ª¥×¥·¥ç¥ó¤Î°ìÍ÷¤¬¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"\n"
-"Ê̤Υª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤¬¥·¥¹¥Æ¥à¾å¤Ë¤¢¤ì¤Ð¡¢¼«Æ°Åª¤Ëµ¯Æ°\n"
-"¥á¥Ë¥å¡¼¤ËÄɲ䵤ì¤Þ¤¹¡£´û¸¤Î¥ª¥×¥·¥ç¥ó¤ÎºÙ¤«¤¤ÀßÄê¤â¤Ç¤­¤Þ¤¹¡£\n"
-"´û¸¥¨¥ó¥È¥ê¤ò¥À¥Ö¥ë¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤¿¤êºï½ü¤·\n"
-"¤¿¤ê¤Ç¤­¤Þ¤¹¡£¡Ö´°Î»¡×¤ò²¡¤»¤Ð¡¢¥¤¥ó¥¹¥È¡¼¥ë¤Î¼¡¤Î¥¹¥Æ¥Ã¥×¤Ø¿Ê¤ß\n"
-"¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) ¤È Grub ¤Ï¥Ö¡¼¥È¥í¡¼¥À¤Ç¤¹¡£¥³¥ó¥Ô¥å¡¼¥¿¾å¤ÎGNU/Linux\n"
-"¤Ê¤É³Æ¼ïOS¤òµ¯Æ°¤Ç¤­¤Þ¤¹¡£\n"
-"ÉáÄ̤ϡ¢¤³¤ì¤é¤ÎOS¤Ï¼«Æ°Åª¤Ë¤­¤Á¤ó¤È¸¡½Ð¤µ¤ì¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-"¤³¤ì¤¬¥À¥á¤Ê¤é¡¢¤³¤³¤Ç¼êÆ°¤Ç¥¨¥ó¥È¥ê¤òÄɲä·¤Þ¤·¤ç¤¦¡£¥Ñ¥é¥á¡¼¥¿¤ò\n"
-"¤Þ¤Á¤¬¤¨¤Ê¤¤¤è¤¦Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¾¤ÎOS¤Ë¤Ï¾¤Î¿Í¤¬¥¢¥¯¥»¥¹¤Ç¤­¤Ê¤¤¤è¤¦¤Ë¤·¤¿¤¤¤³¤È¤â¤¢¤ê¤Þ¤¹¡£¤³¤Î\n"
-"¾ì¹ç¤Ë¤Ï¤½¤ÎOS¤Î¥¨¥ó¥È¥ê¤òºï½ü¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£¤¿¤À¤·¤³¤Î¾ì¹ç¤Ï¡¢\n"
-"¤½¤ÎOS¤ò»È¤¦¤È¤­¤Ë¤Ïµ¯Æ°¥Ç¥£¥¹¥¯¤¬Íפê¤Þ¤¹¤è¡ª"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux¤ò¤¿¤Á¤¢¤²¤ë¤Î¤ËɬÍפʾðÊó¤ò¡¢¤É¤³¤ËÃÖ¤­¤¿¤¤¤«»ØÄꤷ¤Þ¤¹¡£\n"
-"\n"
-"¤è¤¯¤ï¤«¤é¤Ê¤¤¤Ê¤é¡Ö¥É¥é¥¤¥Ö¤ÎºÇ½é¤Î¥»¥¯¥¿(MBR)¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"¤³¤³¤Ç¤Ï¥³¥ó¥Ô¥å¡¼¥¿ÍѤΰõºþ¥·¥¹¥Æ¥à¤òÁª¤Ó¤Þ¤¹¡£Â¾¤ÎOS¤Ç¤Ï°ì¤Ä¤·¤«\n"
-"Ä󶡤µ¤ì¤Ê¤¤°õºþ¥·¥¹¥Æ¥à¤¬¡¢¤³¤³¤Ç¤Ï3¤Ä¤â¤¢¤ê¤Þ¤¹¡£\n"
-"\n"
-" * \"pdq\" - ¤³¤ì¤Ï¡Öprint, don't queue¡Ê°õºþ¤·¤Æ¥­¥å¡¼¤Ï¤·¤Ê¤¤¡Ë¡×\n"
-"¤Ç¤¹¡£¥×¥ê¥ó¥¿¤¬¥Þ¥·¥ó¤Ëľ·ë¤·¤Æ¤¤¤Æ¡¢»æµÍ¤Þ¤ê¤Î¤È¤­¤Ë¤¹¤°ÃæÃǤǤ­\n"
-"¤Æ¡¢¥Í¥Ã¥È¥ï¡¼¥¯¥×¥ê¥ó¥¿¤¬¤Ê¤¤¾ì¹ç¤Ë¤Ï¤³¤ì¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£¥Í¥Ã¥È¥ï¡¼¥¯\n"
-"¤Ï¤´¤¯´Êñ¤Ê¤â¤Î¤·¤«Âбþ¤Ç¤­¤Ê¤¤¤·¡¢¤½¤ì¤Ë¥Í¥Ã¥È¥ï¡¼¥¯¤Ç»È¤¦¤ÈÃÙ¤¯¤Ê¤ê\n"
-"¤Þ¤¹¡£GNU/Linux¤¬½é¤á¤Æ¤Ê¤é¡¢\"pdq\" ¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ç\n"
-"¤âPrinterDrake¤òMandrake ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼¤«¤éÁª¤ó¤Ç¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×\n"
-"¥Ü¥¿¥ó¤ò²¡¤»¤Ð¡¢¸å¤«¤éÁªÂò¤ÏÊѤ¨¤é¤ì¤Þ¤¹¡£\n"
-"\n"
-" * \"CUPS\"¡ÖCommon Unix Printing System¡Ê¶¦ÄÌUnix°õºþ¥·¥¹¥Æ¥à¡Ë¡×\n"
-"¤Ï¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤Ø¤Î°õºþ¤â¡¢Ãϵå¤Î΢¦¤Î¥×¥ê¥ó¥¿¤Ø¤Î°õºþ¤â¸«»ö¤Ë½èÍý\n"
-"¤·¤Þ¤¹¡£¥µ¡¼¥Ð¾õ¤Ë¤â»È¤¨¤ë¤·¡¢ÀΤʤ¬¤é¤Î \"lpd\" °õºþ¥·¥¹¥Æ¥à¤Î¥¯¥é¥¤\n"
-"¥¢¥ó¥È¤Ë¤â¤Ê¤ë¤Î¤Ç¡¢¸Å¤¤¥·¥¹¥Æ¥à¤È¸ß´¹À­¤â¤¢¤ê¤Þ¤¹¡£¤¤¤í¤¤¤í·Ý¤â¤Ç¤­¤Þ\n"
-"¤¹¤¬¡¢´ðËÜŪ¤ÊÀßÄê¤Ï \"pdq\" ¤ÈƱ¤¸¤¯¤é¤¤´Êñ¤Ç¤¹¡£¤³¤ì¤Ë \"lpd\" ¥µ¡¼¥Ð\n"
-"¤ò¥¨¥ß¥å¥ì¡¼¥È¤·¤Æ¤Û¤·¤±¤ì¤Ð¡¢\"cups-lpd\" ¥Ç¡¼¥â¥ó¤òÍ­¸ú¤Ë¤·¤Þ¤·¤ç¤¦¡£\n"
-"°õºþ¤ä¥×¥ê¥ó¥¿¥ª¥×¥·¥ç¥óÁªÂòÍѤ˥°¥é¥Õ¥£¥Ã¥¯¥Õ¥í¥ó¥È¥¨¥ó¥É¤â¤¢¤ê¤Þ¤¹¡£\n"
-"\n"
-" * \"lprNG\" - ¡Öline printer daemon New Generation¡Ê¥é¥¤¥ó¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó\n"
-"¥Ë¥å¡¼¥¸¥§¥Í¥ì¡¼¥·¥ç¥ó¡Ë¡×¡£¤³¤ì¤Ï¾¤Î¥ª¥×¥·¥ç¥ó¤È¤Û¤ÜƱ¤¸¤³¤È¤¬¤Ç¤­¤Þ¤¹¤¬\n"
-"IPX¥×¥í¥È¥³¥ë¤ò¥µ¥Ý¡¼¥È¤·¤Æ¤¤¤ë¤Î¤ÇNovell Network¾å¤Î¥×¥ê¥ó¥¿¤Ç¤â°õºþ¤Ç¤­\n"
-"¤ë¤·¡¢¥·¥§¥ë¥³¥Þ¥ó¥É¤ØľÀÜ°õºþ¤â¤Ç¤­¤Þ¤¹¡£Novell ¤¬É¬ÍפÀ¤Ã¤¿¤ê¡¢¥Ñ¥¤¥×\n"
-"¤ò»È¤ï¤º¤Ë¥³¥Þ¥ó¥É¤Ø°õºþ¤·¤¿¤±¤ì¤Ð lprNG¤ò»È¤¤¤Þ¤·¤ç¤¦¡£\n"
-"¤µ¤â¤Ê¤±¤ì¤Ð¡¢CUPS ¤Î¤Û¤¦¤¬´Êñ¤À¤·¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ç¤ÎÀ­Ç½¤¬Í¥¤ì¤Æ¤¤¤ë¤Î¤Ç\n"
-"CUPS¤Ë¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX¤Ï¥Þ¥·¥ó¾å¤ÎIDE¥Ç¥Ð¥¤¥¹¤òÁ´Éô¸«¤Ä¤±¤è¤¦¤È¤·¤Þ¤¹¡£¤Þ¤¿PCI SCSI\n"
-"¥¢¥À¥×¥¿¤â¤¢¤ì¤Ð¸¡½Ð¤·¤è¤¦¤È¤·¤Þ¤¹¡£SCSI¥«¡¼¥É¤ß¤Ä¤±¤¿¤é¡¢Å¬Àڤʥɥ饤¥Ð\n"
-"¤ò¼«Æ°Åª¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£\n"
-"\n"
-"¥Ï¡¼¥É¥¦¥§¥¢¸¡½Ð¤Ï¤È¤­¤É¤­¼ºÇÔ¤¹¤ë¤³¤È¤â¤¢¤ë¤Î¤Ç¡¢DrakX¤ÏPCI SCSI¥¢¥À\n"
-"¥×¥¿¤¬¥·¥¹¥Æ¥à¤Ë¤¢¤ë¤«¤É¤¦¤«³Îǧ¤¹¤ë¤è¤¦Ê¹¤¤¤Æ¤­¤Þ¤¹¡£¤â¤·Â¸ºß¤¹¤ë¤Ê¤é\n"
-"¡Ö¤Ï¤¤¡×¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢¥¢¥À¥×¥¿¤Î¥É¥é¥¤¥Ð°ìÍ÷¤òɽ¼¨¤¹¤ë¤Î¤Ç¡¢¤½\n"
-"¤³¤«¤éÁª¤Ó¤Þ¤·¤ç¤¦¡£SCSI ¤¬¤Ê¤±¤ì¤Ð¡Ö¤¤¤¤¤¨¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¡Ö¥Ï¡¼¥É¥¦¥§¥¢¾ðÊó¤ò¸«¤ë¡×¤òÁª¤ó¤ÇOK¤ò¥¯¥ê¥Ã¥¯¤·¡¢\n"
-"¥Ï¡¼¥É¥¦¥§¥¢°ìÍ÷¤ò¸«¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¼êÆ°¤Ç¥¢¥À¥×¥¿¤ò»ØÄꤷ¤¿¾ì¹ç¤Ë¤Ï¡¢DrakX¤Ï¥ª¥×¥·¥ç¥ó»ØÄê¤ò¤·¤¿¤¤¤«¤É¤¦¤«\n"
-"¼ÁÌ䤷¤Æ¤­¤Þ¤¹¡£DrakX¤Ë¥Ï¡¼¥É¥¦¥§¥¢¤ò¥×¥í¡¼¥Ö¤µ¤»¤Æ¡¢¥ª¥×¥·¥ç¥ó¤ò·è¤á¤µ¤»\n"
-"¤Þ¤·¤ç¤¦¡£¤¿¤¤¤Æ¤¤¤³¤ì¤Ç¤¦¤Þ¤¯Æ¯¤­¤Þ¤¹¡£\n"
-"\n"
-"¤â¤·É¬Í×¥ª¥×¥·¥ç¥ó¤òDrakX¤¬¼«Æ°Åª¤Ë¼èÆÀ¤Ç¤­¤Ê¤±¤ì¤Ð¥À¥á¤Ê¤é¡¢¥É¥é¥¤¥Ð¤Ë\n"
-"¼«Ê¬¤Ç¥ª¥×¥·¥ç¥ó¤òÍ¿¤¨¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£\n"
-"¥æ¡¼¥¶¥¬¥¤¥É¡Ê3¾Ï¡¢¡Ö¥Ï¡¼¥É¥¦¥§¥¢¤Ë¤Ä¤¤¤Æ¤Î¾ðÊó¼ý½¸¡×¡Ë¤«¤é¡¢¤³¤ì¤Ë´Ø¤ï¤ë\n"
-"¾ðÊó¤ò¥Ï¡¼¥É¤Î¥Þ¥Ë¥å¥¢¥ë¤ä¥á¡¼¥«¡¼ Web ¥µ¥¤¥È¡Ê¥Í¥Ã¥È¤Ë¥¢¥¯¥»¥¹¤Ç¤­¤ì¤Ð¡Ë\n"
-"¤¢¤ë¤¤¤Ï¡Ê¥·¥¹¥Æ¥à¾å¤Ë¤¢¤ì¤Ð¡ËMS Windows ¤«¤é¤É¤¦¤ä¤Ã¤ÆɬÍ×¾ðÊó¤òÆÀ¤ë¤«\n"
-"¤òÄ´¤Ù¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"yabootÍѤÎÄɲ娥ó¥È¥ê¤ò¤³¤³¤ÇÄɲäǤ­¤Þ¤¹¡£Â¾¤ÎOS¤Î¾ì¹ç¤Ç¤â¡¢Â¾¤Î\n"
-"¥«¡¼¥Í¥ë¤Ç¤â¡¢¶ÛµÞÍѵ¯Æ°¥¤¥á¡¼¥¸¤Ç¤â²Äǽ¤Ç¤¹¡£\n"
-"\n"
-"¤Û¤«¤ÎOS¤Î¾ì¹ç - ¥¨¥ó¥È¥ê¤Ï¡¢¥é¥Ù¥ë¤Èroot¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤À¤±¤Ç¤¹¡£\n"
-"\n"
-"Linux ¤Î¾ì¹ç¡¢²Äǽ¤Ê¥ª¥×¥·¥ç¥ó¤¬¤¤¤¯¤Ä¤«¤¢¤ê¤Þ¤¹: \n"
-"\n"
-"  * ¥é¥Ù¥ë: ¤³¤Îµ¯Æ°¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤È¤­¤Ë¡¢yaboot¥×¥í¥ó¥×¥È¤Ç¥¿¥¤¥×\n"
-"¤¹¤ë̾¾Î¡£\n"
-"\n"
-"  * ¥¤¥á¡¼¥¸: µ¯Æ°¤¹¤ë¥«¡¼¥Í¥ë¤Î̾¾Î¡£ÉáÄÌ¤Ï vmlinux¡¢¤Þ¤¿¤Ï\n"
-"¤½¤ì¤Ë¤Ê¤Ë¤«³ÈÄ¥»Ò¤¬¤Ä¤¤¤¿¤â¤Î¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"  * µ¯Æ°: Linux¥¤¥ó¥¹¥È¡¼¥ëÍѤÎroot¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Þ¤¿¤Ï¡Ö/¡×\n"
-"\n"
-"  \n"
-"  * ÄɲÃ: Apple ¤Î¥Ï¡¼¥É¥¦¥§¥¢¤Ç¤Ï¡¢¥«¡¼¥Í¥ëÄɲ媥ץ·¥ç¥ó¤Ï¤«¤Ê¤ê¤Î¾ì¹ç\n"
-"¥Ó¥Ç¥ª¥Ï¡¼¥É¥¦¥§¥¢¤Î½é´ü²½¤Ë»È¤Ã¤¿¤ê¡¢1¥Ü¥¿¥ó¥Þ¥¦¥¹ÍѤ˥­¡¼¥Ü¡¼¥É¤Ë¤è¤ë\n"
-"¥Þ¥¦¥¹¥Ü¥¿¥ó¤Î¥¨¥ß¥å¥ì¡¼¥·¥ç¥ó¤Ë»È¤Ã¤¿¤ê¤·¤Þ¤¹¡£°Ê²¼¤ËÎã¤òµó¤²¤Þ¤¹:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"  * Initrd: ¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¡¢µ¯Æ°¥Ç¥Ð¥¤¥¹¤¬Í­¸ú¤Ë¤Ê¤ëÁ°¤Ë½é´ü¥â¥¸¥å¡¼¥ë\n"
-"¤Î¥í¡¼¥É¤«¡¢¤¢¤ë¤¤¤Ï¶ÛµÞµ¯Æ°»þ¤Îramdisk ¥¤¥á¡¼¥¸¤Î¥í¡¼¥É¤Ë»È¤¤¤Þ¤¹¡£\n"
-"\n"
-"  * Initrd-size: ¥Ç¥Õ¥©¥ë¥È¤Î ramdisk ¥µ¥¤¥º¤Ï4096 ¥Ð¥¤¥È¤Ç¤¹¡£\n"
-"¤â¤Ã¤ÈÂ礭¤Ê ramdisk ¤ò»È¤¦¤È¤­¤Ë¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò»ÈÍѤ·¤Þ¤¹¡£\n"
-"\n"
-"  * Read-write: Ä̾¡Öroot¡×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÏÆɤ߽Ф·ÀìÍѤǵ¯Æ°¤·¡¢\n"
-"¥·¥¹¥Æ¥à¤¬¡ÖΩ¤Á¾å¤¬¤ë¡×Á°¤Ë¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¥Á¥§¥Ã¥¯¤ò¤·¤Þ¤¹¡£¤³¤Î\n"
-"¥ª¥×¥·¥ç¥ó¤Ç¤³¤ì¤ò¥ª¡¼¥Ð¡¼¥é¥¤¥É¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"  * NoVideo: Apple ¤Î¥Ó¥Ç¥ª²óÏ©¤¬¶Ëü¤ËÌäÂê¤òµ¯¤³¤¹¤è¤¦¤Ê¤é¡¢¤³¤Î\n"
-"¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¡Ö¥Ó¥Ç¥ª¤Ê¤·¡×¥â¡¼¥É¤Çµ¯Æ°¤Ç¤­¤Þ¤¹¡£¤³¤Î¾ì¹ç¤Ë¤Ï\n"
-"¥Í¥¤¥Æ¥£¥Ö¤Î¥Õ¥ì¡¼¥à¥Ð¥Ã¥Õ¥¡¤Çµ¯Æ°¤·¤Þ¤¹¡£\n"
-"\n"
-"  * ¥Ç¥Õ¥©¥ë¥È: ¥Ç¥Õ¥©¥ë¥È¤Î Linux ¤ÎÁªÂò¤È¤·¤Æ¤³¤Î¥¨¥ó¥È¥ê¤¬»È¤ï¤ì\n"
-"¤Þ¤¹¡£¤³¤ì¤Ïñ¤Ë¡¢yaboot ¥×¥í¥ó¥×¥È¤Ç ENTER ¤ò²¡¤»¤ÐÁª¤Ù¤Þ¤¹¡£¤³¤Î\n"
-"¥¨¥ó¥È¥ê¤Ï¤Þ¤¿¡¢TAB¤ò²¡¤·¤Æµ¯Æ°»þ¤ÎÁªÂò»è¤òɽ¼¨¤µ¤»¤¿¤È¤­¤Ë¤Ï¡¢\n"
-"¡Ö*¡×¤¬¤Ä¤¤¤Æ¥Ï¥¤¥é¥¤¥È¤µ¤ì¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot ¤Ï¡¢NewWorld MacIntosh ¥Ï¡¼¥É¥¦¥§¥¢ÍѤΥ֡¼¥È¥í¡¼¥À¤Ç¤¹¡£¤³¤ì¤¬\n"
-"¤¢¤ë¤È¡¢¥Þ¥·¥ó¾å¤ÎGNU/Linux, MacOS, MacOSX ¤òµ¯Æ°»þ¤ËÁª¤Ù¤Þ¤¹¡£\n"
-"¤Õ¤Ä¤¦¡¢¤³¤¦¤·¤¿ GNU/Linux °Ê³°¤Î OS ¤Ï¼«Æ°Åª¤Ë¤­¤Á¤ó¤È¸¡½Ð¤µ¤ì¤Æ\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£¤â¤·¥À¥á¤Ê¤é¡¢¤³¤Î²èÌ̤ǡ¢¼«Ê¬¤Ç¥¨¥ó¥È¥ê¤òÄɲÃ\n"
-"¤Ç¤­¤Þ¤¹¡£Àµ¤·¤¤¥Ñ¥é¥á¡¼¥¿¤òÁª¤Ö¤è¤¦Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"Yaboot ¤Î¼ç¥ª¥×¥·¥ç¥ó¤Ï:\n"
-"\n"
-"  * µ¯Æ°¥á¥Ã¥»¡¼¥¸: boot¥×¥í¥ó¥×¥ÈÁ°¤Ëɽ¼¨¤µ¤ì¤ë´Êñ¤Ê¥á¥Ã¥»¡¼¥¸\n"
-"\n"
-"  * µ¯Æ°¥Ç¥Ð¥¤¥¹: GNU/Linux µ¯Æ°ÍѤξðÊó¤ò¤É¤³¤ËÃÖ¤¯¤«»Ø¼¨¡£\n"
-"ÉáÄ̤ϡ¢¤³¤Î¾ðÊóÍѤ˥֡¼¥È¥¹¥È¥é¥Ã¥×ÍѤΥѡ¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"¤³¤ÎÁ°¤ÎÃʳ¬¤Çºî¤Ã¤Æ¤¢¤ë¤Ï¤º¤Ç¤¹¡£\n"
-"\n"
-"  * ¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢¤ÎÂÔ¤Á»þ´Ö: LILO ¤È¤Á¤¬¤Ã¤Æ¡¢yaboot¤Ë¤ÏÂÔ¤Á»þ´Ö\n"
-"¤¬Æó¼ïÎàÀßÄê¤Ç¤­¤Þ¤¹¡£ºÇ½é¤ÎÂÔ¤Á»þ´Ö¤ÏÉÃñ°Ì¤Ç¡¢¤³¤ÎÂÔ¤Á»þ´Ö¤Î´Ö¤Ë¡¢\n"
-"CD, OF boot, MacOS, Linux¤Î¤É¤ì¤òµ¯Æ°¤¹¤ë¤«Áª¤Ù¤Þ¤¹¡£\n"
-"\n"
-"  * ¥«¡¼¥Í¥ëµ¯Æ°¥¿¥¤¥à¥¢¥¦¥È: ¤³¤Î¥¿¥¤¥à¥¢¥¦¥È¤Ï LILO µ¯Æ°ÂÔ¤Á»þ´Ö¤È»÷¤Æ¤¤¤Þ"
-"¤¹¡£Linux ¤òÁª¤ó¤À¤é¡¢¤³¤ÎÂÔ¤Á»þ´Ö¤¬0.1ÉÃñ°Ì¤Ç¼Â¹Ô¤µ¤ì¤Æ¡¢¤½¤Î¤Þ¤Þ\n"
-"¤À¤È¥Ç¥Õ¥©¥ë¥È¤Î¥«¡¼¥Í¥ëµ­½Ò¤¬Áª¤Ð¤ì¤Þ¤¹¡£\n"
-"\n"
-"  - CD µ¯Æ°¤òÍ­¸ú¤Ë¤·¤Þ¤¹¤«?: ¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¥Á¥§¥Ã¥¯¤¹¤ë¤È¡¢ºÇ½é¤Îµ¯Æ°¥×¥í"
-"¥ó¥×¥È¤Ç¡ÖC¡×¤òÁª¤ó¤ÇCD¤«¤éµ¯Æ°¤Ç¤­¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"  * OF µ¯Æ°¤òÍ­¸ú¤Ë¤·¤Þ¤¹¤«?: ¤³¤Î¥ª¥×¥·¥ç¥ó¤ò¥Á¥§¥Ã¥¯¤¹¤ë¤È¡¢ºÇ½é¤Îµ¯Æ°¥×¥í"
-"¥ó¥×¥È¤Ç¡ÖN¡×¤òÁª¤ó¤Ç¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢¤«¤éµ¯Æ°¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"  * ¥Ç¥Õ¥©¥ë¥È OS: ¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢¤ÎÂÔ¤Á»þ´Ö¤¬²á¤®¤¿¤È¤­¡¢¤É¤Î\n"
-"OS¤¬µ¯Æ°¤¹¤ë¤«¤ò»ØÄꤷ¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥Þ¥·¥ó¤Ë´Ø¤¹¤ë³Æ¼ï¤Î¥Ñ¥é¥á¡¼¥¿¤ò¼¨¤·¤Þ¤¹¡£¥Ï¡¼¥É¥¦¥§¥¢¤Ë¤â\n"
-"¤è¤ê¤Þ¤¹¤¬¡¢°Ê²¼¤Î¤è¤¦¤Ê¹àÌܤ¬½Ð¤Æ¤¯¤ë¤Ï¤º¤Ç¤¹:\n"
-"\n"
-" * ¡Ö¥Þ¥¦¥¹¡×: ¥Þ¥¦¥¹¡£¸½ºß¤Î¥Þ¥¦¥¹ÀßÄê¤ò¸«¤Æ¡¢É¬Íפʤé¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯\n"
-"¤·¤ÆÊѹ¹¤·¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö¥­¡¼¥Ü¡¼¥É¡×¡§¥­¡¼¥Ü¡¼¥É¡£¤¤¤Þ¤Î¥­¡¼¥Ü¡¼¥É¤Î³äÉÕÀßÄê¤ò¸«¤Æ¡¢É¬Íפʤé\n"
-"¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤ÆÊѹ¹¤·¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö»þ´ÖÂÓ¡×: »þ´ÖÂÓ¡¡DrakX ¤Ï¥Ç¥Õ¥©¥ë¥È¤Ç¡¢¤¢¤Ê¤¿¤ÎÁª¤ó¤À¸À¸ì¤Ë±þ¤¸¤Æ\n"
-"»þ´ÖÂÓ¤ò¿äÄꤷ¤Þ¤¹¡£¤Ç¤â¤³¤³¤Ç¤â¥­¡¼¥Ü¡¼¥É¤ÎÁªÂò¤ÈƱ¤¸¤Ç¡¢¸À¸ì¤È¤Ï\n"
-"¤Á¤¬¤¦¹ñ¤Ë¤¤¤ë¤È¤­¤Ë¤Ï¡¢»þ´ÖÂӥܥ¿¥ó¤ò²¡¤·¤Æ¡¢¼«Ê¬¤Î»þ´ÖÂӤˤ¢¤ï¤»¤¿\n"
-"ÀßÄê¤Ë¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö¥×¥ê¥ó¥¿¡×: ¡Ö¥×¥ê¥ó¥¿¤Ê¤·¡×¥Ü¥¿¥ó¤ò²¡¤¹¤È¡¢¥×¥ê¥ó¥¿ÀßÄꥦ¥£¥¶¡¼¥É\n"
-"¤¬³«¤­¤Þ¤¹¡£\n"
-"\n"
-" * ¡Ö¥µ¥¦¥ó¥É¥«¡¼¥É¡×: ¥µ¥¦¥ó¥É¥«¡¼¥É¤¬¸¡½Ð¤µ¤ì¤¿¤é¤³¤³¤Ëɽ¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¤ÏÊѹ¹¤Ç¤­¤Þ¤»¤ó¡£\n"
-"\n"
-" * ¡ÖTV ¥«¡¼¥É¡×: TV ¥«¡¼¥É¤¬¸¡½Ð¤µ¤ì¤¿¤é¤³¤³¤Ëɽ¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¤ÏÊѹ¹¤Ç¤­¤Þ¤»¤ó¡£\n"
-"\n"
-" * ¡ÖISDN ¥«¡¼¥É¡×: ISDN ¥«¡¼¥É¤¬¸¡½Ð¤µ¤ì¤¿¤é¤³¤³¤Ëɽ¼¨¤µ¤ì¤Þ¤¹¡£\n"
-"¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È´ØÏ¢¥Ñ¥é¥á¡¼¥¿¤¬ÊѤ¨¤é¤ì¤Þ¤¹¡£"
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"¿·¤·¤¤ Mandrake Linux ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î¥¤¥ó¥¹¥È¡¼¥ëÍѤ˾õ¤¿¤¤\n"
-"¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤½¤Î¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤ÏÁ´Éô\n"
-"¾Ã¤¨¤Æ²óÉü¤Ç¤­¤Þ¤»¤ó¡£Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"¤³¤Î¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Î¤¹¤Ù¤Æ¤Î¥Ç¡¼¥¿¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"¾Ãµî¤¹¤ë¤Ê¤é¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤¿¤é¡¢\n"
-"¤³¤Î¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Ëº£¤¢¤ë¥Ç¡¼¥¿¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¢¥¦¥£¥ó¥É¥¦¥º\n"
-"¤Î¤â¤Î¤ò´Þ¤á¡¢¤¹¤Ù¤Æ¾Ãµî¤µ¤ì¤Æ²óÉüÉÔ²Äǽ¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"¤³¤ÎÁàºî¤ò¼è¤ê¤ä¤á¤Æ¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤ä¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-"¤½¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤¯¤Ë¤Ï¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "%s ¤â¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"°Ê²¼¤Î¥µ¡¼¥Ð¤òÁª¤Ó¤Þ¤·¤¿¤Í: %s\n"
-"\n"
-"\n"
-"¤³¤ì¤é¤Î¥µ¡¼¥Ð¤Ï¥Ç¥Õ¥©¥ë¥È¤ÇÍ­¸ú¤Ë¤Ê¤ê¤Þ¤¹¡£Æä˥»¥­¥å¥ê¥Æ¥£¾å¤Î\n"
-"ÌäÂê¤Ï¤Ê¤¤¤è¤¦¤Ç¤¹¤¬¡¢¤³¤ÎÀèȯÀ¸¤¹¤ë¤³¤È¤â¤¢¤ê¤Þ¤¹¡£¤½¤Î¾ì¹ç¤Ë¤Ï\n"
-"¤¹¤°¤Ë¥¢¥Ã¥×¥°¥ì¡¼¥É¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"\n"
-"ËÜÅö¤Ë¤³¤Î¥µ¡¼¥Ð¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤¤¤Ç¤¹¤Í¡©\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS ¥É¥á¥¤¥ó¤¬¤Ê¤¤¤Î¤Ç¥Ö¥í¡¼¥É¥­¥ã¥¹¥È¤¬»È¤¨¤Þ¤»¤ó"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "FAT·Á¼°¤Î¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "¤³¤Î¥Õ¥í¥Ã¥Ô¡¼¤Ï FAT¥Õ¥©¡¼¥Þ¥Ã¥È¤¸¤ã¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"¤³¤ÎÊݸ¤·¤¿¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤ò»È¤¦¤Ë¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë¤Îµ¯Æ°»þ¤Ë¡Ölinux "
-"defcfg=floppy¡×¤È»ØÄꤷ¤Þ¤¹¡£"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "¥Õ¥¡¥¤¥ë %s ¤ÎÆɤߤȤꥨ¥é¡¼¤Ç¤¹"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥Þ¥·¥ó¾å¤Î¥Ï¡¼¥É¤ÎÃæ¤Ë¤Ï¡¢¡ÖÈó¸ø³«¤Î¡×¥É¥é¥¤¥Ð¤¬É¬Íפʤâ¤Î¤¬\n"
-"¤¢¤ê¤Þ¤¹¡£°Ê²¼¤Î¾ðÊó¤ò¸«¤Æ¤¯¤À¤µ¤¤: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"root ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¸«¤¢¤¿¤ê¤Þ¤»¤ó¤Í¡£¤³¤ì¤ÏÀäÂФËɬÍפǤ¹¡£\n"
-"¿·¤·¤¯¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¤«¡¢´û¸¤Î¤â¤Î¤ò¥¯¥ê¥Ã¥¯¤·¤ÆÁª¤Ó¤Þ¤¹¡£\n"
-"¤½¤·¤Æ¡È¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¡É¥¢¥¯¥·¥ç¥ó¤òÁª¤Ó¡¢¡Ö/¡×¤Ë¥»¥Ã¥È¤·¤Þ¤¹"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "¥¹¥ï¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬É¬ÍפǤ¹"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"¥¹¥ï¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó\n"
-"\n"
-"¹½¤ï¤º¤Ë³¤±¤Þ¤¹¤«¡©"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "/boot/efi ¤Ë FAT ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥Þ¥¦¥ó¥È¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "¥Õ¥ê¡¼¥¹¥Ú¡¼¥¹¤Î»ÈÍÑ"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë³ä¤êÅö¤Æ¤ë½½Ê¬¤Ê¥Õ¥ê¡¼¥¹¥Ú¡¼¥¹¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "´û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò»ÈÍÑ"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "¸ºß¤·¤Ê¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Windows ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥ë¡¼¥×¥Ð¥Ã¥¯¤Ë»ÈÍÑ"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ËLinux4Win¤òÆþ¤ì¤Þ¤¹¤«"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "¥µ¥¤¥º¤òÁªÂò"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î¥µ¥¤¥º (MB)"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "¥¹¥ï¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Î¥µ¥¤¥º (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¾å¤Î¥Õ¥ê¡¼¥¹¥Ú¡¼¥¹¤ò»ÈÍÑ"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥ê¥µ¥¤¥º¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î¶­³¦¤ò·×»»"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT ¥ê¥µ¥¤¥¶¡¼¤Ï¥Ñ¡¼¥Æ¥£¥·¥ç¥óÁàºî¤¬¤Ç¤­¤Þ¤»¤ó¡£\n"
-"°Ê²¼¤Î¥¨¥é¡¼¤¬È¯À¸: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬ÃÇÊÒ²½¤·¤¹¤®¤Ç¤¹¡£¡È¥Ç¥Õ¥é¥°¡É¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"Ãí°Õ¡ª\n"
-"\n"
-"DrakX ¤Ï¤³¤ì¤«¤é¥¦¥£¥ó¥É¥¦¥º¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥µ¥¤¥º¤òÊѹ¹¤·¤Þ¤¹¡£\n"
-"Ãí°Õ:¤³¤ÎÁàºî¤Ï´í¸±¤Ç¤¹¡£¤â¤·»öÁ°¤Ë scandisk ¤ò¤«¤±¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢\n"
-"¤³¤³¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤òÃæÃǤ·¡¢scandisk¤ò¤«¤±¤Þ¤·¤ç¤¦¡Ê¤µ¤é¤Ëdefrag\n"
-"¤â¤«¤±¤¿¤Û¤¦¤¬¤¤¤¤¤Ç¤¹)¡£\n"
-"¥Ç¡¼¥¿¤â¥Ð¥Ã¥¯¥¢¥Ã¥×¤·¤Æ¤¢¤ê¤Þ¤¹¤«¡©¡¡¤¤¤Þ¤Î¤¦¤Á¤Ë¤·¤Æ\n"
-"¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-"Âç¾æÉפʤé Ok ¤ò²¡¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "¥¦¥£¥ó¥É¥¦¥ºÍѤˤɤΤ¯¤é¤¤¤Î¥µ¥¤¥º¤ò»Ä¤·¤Æ¤ª¤­¤Þ¤¹¤¬"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT ¤Î¥ê¥µ¥¤¥º¤Ë¼ºÇÔ: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"¥ê¥µ¥¤¥º¤ä¥ë¡¼¥×¥Ð¥Ã¥¯ÍѤÎFAT¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó (¤Þ¤¿¤Ï½½Ê¬¤Ê¥¹¥Ú¡¼¥¹"
-"¤¬Ìµ¤¤)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Á´¥Ç¥£¥¹¥¯¾Ãµî"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) ¤òºï½ü"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Ê£¿ô¤Î¥Ï¡¼¥É¥É¥é¥¤¥Ö¤ò»ý¤Ã¤Æ¤¤¤Þ¤¹¤Í¡¢¤É¤ì¤Ë linux ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "¥É¥é¥¤¥Ö %s ¾å¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ª¤è¤Ó¥Ç¡¼¥¿¤ÏÁ´Éô¼º¤ï¤ì¤Þ¤¹"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¼«Ê¬¤Ç»ØÄê"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "fdisk¤ò»È¤¦"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"%s ¤ò¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ç¤­¤Þ¤¹¡£\n"
-"½ª¤ï¤Ã¤¿¤é¡¢É¬¤º¡Öw¡×¤ò»È¤Ã¤ÆÊݸ¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¾å¤Î¥Õ¥ê¡¼¥¹¥Ú¡¼¥¹¤¬Â­¤ê¤Þ¤»¤ó"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëÍѤζõ¤­¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¤¬"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥¦¥£¥¶¡¼¥É¤Ï°Ê²¼¤Î²òË¡¤ò¸«ÉÕ¤±¤Þ¤·¤¿:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥Ë¥ó¥°¤Ë¼ºÇÔ: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ò¤¿¤Á¤¢¤²¤ë"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤òÄä»ß¤¹¤ë"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"¥¨¥é¡¼È¯À¸¡¤¤¦¤Þ¤¯½èÍý¤¹¤ëÊýË¡¤¬¤ï¤«¤ê¤Þ¤»¤ó¡£\n"
-"¼«Ê¬¤ÎÀÕǤ¤Ç³¤±¤Æ²¼¤µ¤¤¡£"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È %s ¤¬½Å¤Ê¤Ã¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"¤À¤¤¤¸¤Ê¥Ñ¥Ã¥±¡¼¥¸¤¬¤¤¤¯¤Ä¤«¤­¤Á¤ó¤È¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-"CD-ROM¤«¡¢CD-ROM¤Î¥É¥é¥¤¥Ö¤¬¤ª¤«¤·¤¤¤è¤¦¤Ç¤¹¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Ç¡¢°Ê²¼¤Î¥³¥Þ¥ó¥É¤ÇCD-ROM¤ò¥Á¥§¥Ã¥¯\n"
-"¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡§\n"
-"¡Ö rpm -qpl Mandrake/RPMS/*.rpm ¡×\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s ¤Ø¤è¤¦¤³¤½"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Í­¸ú¤Ê¥Õ¥í¥Ã¥Ô¡¼¥É¥é¥¤¥Ö¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "¥¹¥Æ¥Ã¥× ¡Ö%s¡×¤ò»Ï¤á¤Þ¤¹\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"¥·¥¹¥Æ¥à¥ê¥½¡¼¥¹¤¬Â­¤ê¤Þ¤»¤ó¡£ Mandrake Linux ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤Ë¤Ï\n"
-"¤¤¤¯¤Ä¤«ÌäÂ꤬¤¢¤ê¤Þ¤¹¡£\n"
-"¤³¤Î¾É¾õ¤¬µ¯¤­¤¿¤È¤­¡¢¤«¤ï¤ê¤Ë¥Æ¥­¥¹¥È¥¤¥ó¥¹¥È¡¼¥ë¤ò»î¤»¤Þ¤¹¡£\n"
-"¤³¤ì¤ò¤¹¤ë¤Ë¤Ï¡¢CDROM ¤«¤é¥Ö¡¼¥È¤·¤¿¤È¤­¡¢¡ÖF1¡×¤ò²¡¤·¡¢¡Ötext¡×¤ÈÆþÎϤ·¤Æ\n"
-"¤¯¤À¤µ¤¤¡£"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "°Ê²¼¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹¤ò¤É¤ì¤«Áª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "¤¢¤Ê¤¿¤ÎÁª¤ó¤À¥°¥ë¡¼¥×¤ÎÁí¥µ¥¤¥º¤Ï¡¢¤À¤¤¤¿¤¤ %d MB¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ëÎ̤ò¸º¤é¤·¤¿¤±¤ì¤Ð¡¢¥Ñ¥Ã¥±¡¼¥¸¤Î¥Ñ¡¼¥»¥ó¥È¿ô¤ò\n"
-"»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¤³¤ì¤ò²¼¤²¤ë¤È¡¢¤¤¤Á¤Ð¤ó½ÅÍפʤâ¤Î¤À¤±¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-"100%% ¤ò»ØÄꤹ¤ë¤È¡¢Áª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤ò¤¹¤Ù¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¥Ç¥£¥¹¥¯¾å¤Ë¶õ¤­Îΰè¤Ë¤Ï¡¢¤³¤ì¤é¤Î¥Ñ¥Ã¥±¡¼¥¸¤Î %d%% ¤·¤«Æþ¤ê¤Þ¤»¤ó¡£\n"
-"\n"
-"¥¤¥ó¥¹¥È¡¼¥ëÎ̤ò¸º¤é¤·¤¿¤±¤ì¤Ð¡¢¥Ñ¡¼¥»¥ó¥È¿ô¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤³¤ì¤ò²¼¤²¤ë¤È¡¢¤¤¤Á¤Ð¤ó½ÅÍפʤâ¤Î¤À¤±¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-"%d%% ¤ò»ØÄꤹ¤ë¤È¡¢ºÇÂç¸Â¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "¼¡¤Î¥¹¥Æ¥Ã¥×¤Ç¤Ï¤â¤Ã¤ÈºÙ¤«¤¤ÁªÂò¤¬½ÐÍè¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸Ãæ¤Î³ä¹ç"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¥°¥ë¡¼¥×¤òÁªÂò"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "¸ÄÊ̥ѥ屡¼¥¸¤ÎÁªÂò"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "¹ç·×¥µ¥¤¥º: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤¬²õ¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "̾Á°: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "¥Ð¡¼¥¸¥ç¥ó: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "¥µ¥¤¥º: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "½ÅÍ×: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤ÏÁªÂò¤Ç¤­¤Þ¤»¤ó¡£¥Ç¥£¥¹¥¯¤Î¶õ¤­ÍÆÎ̤¬ÉÔ­¤Ç¤¹¡£"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "°Ê²¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "°Ê²¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬¼è¤ê½ü¤«¤ì¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤ÏÁªÂò¡¦ÈóÁªÂò¤Ç¤­¤Þ¤»¤ó"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "¤³¤ì¤ÏÉԲķç¤Ê¥Ñ¥Ã¥±¡¼¥¸¤Ç¤¹¡£ÈóÁªÂò¤Ë¤Ï¤Ç¤­¤Þ¤»¤ó"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤ÏÈóÁªÂò¤Ë¤Ç¤­¤Þ¤»¤ó¡£¤¹¤Ç¤Ë¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¤Ç¤¹"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤Ï¥¢¥Ã¥×¥°¥ì¡¼¥É¤¬É¬ÍפǤ¹¡£\n"
-"ËÜÅö¤ËÁªÂò²ò½ü¤·¤Æ¤¤¤¤¤ó¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤ÏÁªÂò²ò½ü¤Ç¤­¤Þ¤»¤ó¡£¥¢¥Ã¥×¥°¥ì¡¼¥É¤¬É¬ÍפǤ¹"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "¼«Æ°ÁªÂò¤µ¤ì¤¿¥Ñ¥Ã¥±¡¼¥¸¤òɽ¼¨"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤Ë¥»¡¼¥Ö/¥í¡¼¥É¤¹¤ë"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤Î¹¹¿·"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "ºÇ¾®¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëÃæ"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "»î»»¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "»Ä¤ê»þ´Ö "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Î½àÈ÷Ãæ¡¢¾¯¡¹¤ªÂÔ¤Á¤ò"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ¥Ñ¥Ã¥±¡¼¥¸"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ %s ¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "ǧ¤á¤ë"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "µñÈÝ"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Rom ¤ò¸ò´¹¤·¤Æ¤¯¤À¤µ¤¤¡ª\n"
-"¡Ö %s ¡×¤È¤¤¤¦ Cd-Rom ¤ò¥É¥é¥¤¥Ö¤Ë¤¤¤ì¤Æ¡¢ Ok ¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"CD¤¬¤Ê¤±¤ì¤Ð¡¢Cancel ¤ò²¡¤·¤Æ¤³¤Î Cd-Rom ¤«¤é¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ò²óÈò¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "¤«¤Þ¤ï¤ºÀè¤Ë¿Ê¤ß¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤ÎÀ°Îó¤Ç¥¨¥é¡¼¤¬È¯À¸:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ç¥¨¥é¡¼¤¬È¯À¸:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"·Ù¹ð\n"
-"\n"
-"°Ê²¼¤Î¾ò¹à¤ò¤·¤Ã¤«¤êÆɤó¤Ç¤¯¤À¤µ¤¤¡£¾¯¤·¤Ç¤âƱ°Õ¤Ç¤­¤Ê¤¤Éôʬ¤¬\n"
-"¤¢¤ì¤Ð¼¡¤Î CD ¥á¥Ç¥£¥¢¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ïǧ¤á¤é¤ì¤Þ¤»¤ó¡£¤³¤Î¥á¥Ç¥£¥¢¤ò\n"
-"»È¤ï¤º¥¤¥ó¥¹¥È¡¼¥ë¤ò³¤±¤ë¤Ë¤Ï¡ÖµñÈݡפò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"\n"
-"¼¡¤Î CD ¥á¥Ç¥£¥¢¤Ë´Þ¤Þ¤ì¤ë¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Î°ìÉô¤Ï¡¢GPL¤äÎà»÷¥é¥¤¥»¥ó¥¹\n"
-"¤¬Å¬ÍѤµ¤ì¤Þ¤»¤ó¡£¤½¤Î¾ì¹ç¡¢¤½¤ì¤¾¤ì¤¬Æȼ«¤Î¥é¥¤¥»¥ó¥¹¾ò¹à¤ä¾ò·ï¤Ç\n"
-"¥«¥Ð¡¼¤µ¤ì¤ë¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"³ºÅö¤¹¤ë¥³¥ó¥Ý¡¼¥Í¥ó¥È¤ò»ÈÍѤ·¤¿¤êºÆÇÛÉÛ¤·¤¿¤ê¤¹¤ë¾ì¹ç¤Ë¤Ï¡¢¤½¤¦¤·¤¿\n"
-"¸ÄÊ̥饤¥»¥ó¥¹¤òÆɤó¤Ç¤½¤ì¤Ë¤·¤¿¤¬¤¦¤è¤¦¤Ë¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤½¤¦¤·¤¿¥é¥¤¥»¥ó¥¹¤Ï¤ª¤ª¤à¤Í¡¢Åö³º¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Î°Üž¡¢Ê£À½¡Ê¥Ð¥Ã¥¯\n"
-"¥¢¥Ã¥×ÌÜŪ¤Î¤â¤Î¤ò½ü¤¯¡Ë¡¢ºÆÇÛÉÛ¡¢¥ê¥Ð¡¼¥¹¥¨¥ó¥¸¥Ë¥¢¥ê¥ó¥°¡¢Ê¬²ò¡¢\n"
-"µÕ¥³¥ó¥Ñ¥¤¥ë¡¢Êѹ¹¤Ê¤É¤ò¶Ø¤¸¤Æ¤¤¤ë¤Î¤¬¤Õ¤Ä¤¦¤Ç¤¹¡£\n"
-"¹ç°Õ¤ËÂФ¹¤ë°ãÈ¿¤Ï¤¿¤À¤Á¤Ë¡¢¤½¤ÎÅö³º¥é¥¤¥»¥ó¥¹²¼¤Ç¤Î¤¢¤Ê¤¿¤Î¸¢Íø¤ò\n"
-"¾Ã¼º¤µ¤»¤Þ¤¹¡£Åö³º¥é¥¤¥»¥ó¥¹¤Î¾ò¹à¤¬¤½¤¦¤·¤¿¸¢Íø¤òǧ¤á¤Æ¤¤¤Ê¤¤¸Â¤ê\n"
-"Ê£¿ô¤Î¥·¥¹¥Æ¥à¤Ë¤½¤Î¥×¥í¥°¥é¥à¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤ê¡¢¥Í¥Ã¥È¥ï¡¼¥¯¾å\n"
-"¤Ç»È¤¦¤è¤¦¤Ë¤·¤¿¤ê¤Ï¤Ç¤­¤Þ¤»¤ó¡£ÉÔÌÀÅÀ¤¬¤¢¤ë¤È¤­¤Ë¤Ï¡¢¤½¤Î¥³¥ó¥Ý¡¼\n"
-"¥Í¥ó¥È¤ÎÇÛÉÛ¼Ô¤«ÊÔ½¸¼Ô¤ËľÀÜÌ䤤¹ç¤ï¤»¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤½¤¦¤·¤¿¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Î¡¢Âè»°¼Ô¤Ø¤Î°Üž¤äÊ£À½¤Ï¡¢¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó\n"
-"¤â´Þ¤áÄ̾ï¤Ï¶Ø»ß¤µ¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-"\n"
-"¼¡¤ÎCD ¥á¥Ç¥£¥¢¤Î¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Ë´Ø¤¹¤ë¸¢Íø¤Î¤¹¤Ù¤Æ¤Ï¡¢¤½¤ì¤¾¤ì¤Î\n"
-"ºî¼Ô¤Ë°¤·¡¢¥½¥Õ¥È¥¦¥§¥¢¥×¥í¥°¥é¥à¤ËŬÍѤµ¤ì¤ëÃÎŪºâ»º¤ÈÃøºî¸¢Ë¡¤Ë\n"
-"¤è¤Ã¤ÆÊݸ¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "¥¨¥é¡¼È¯À¸"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "ËÜÅö¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤òÃæÃǤ·¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "¥½¥Õ¥È»ÈÍѥ饤¥»¥ó¥¹¾ò¹à"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"¤Ï¤¸¤á¤Ë\n"
-"\n"
-"ËÜ¥ª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤ª¤è¤ÓMandrake Linux¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¤Ç\n"
-"Ä󶡤µ¤ì¤ë³Æ¼ï¤Î¥³¥ó¥Ý¡¼¥Í¥ó¥È¤ò¡¢°Ê²¼¤Ç¤Ï¡Ö¥½¥Õ¥È¥¦¥§¥¢À½ÉʡפȸƤ֡£\n"
-"¥½¥Õ¥È¥¦¥§¥¢À½Éʤϡ¢¥ª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤ª¤è¤ÓMandrake Linux¥Ç¥£¥¹\n"
-"¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¤ÇÄ󶡤µ¤ì¤ë³Æ¼ï¤Î¥³¥ó¥Ý¡¼¥Í¥ó¥È¤Ë´ØÏ¢¤¹¤ë¥×¥í¥°¥é¥à·²\n"
-"¤ä¥á¥½¥Ã¥É¡¢¤­¤½¤¯¤ä¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó¤ò´Þ¤à¤¬¡¢¤½¤ì¤Ë¸Â¤é¤ì¤ë¤â¤Î¤Ç\n"
-"¤Ï¤Ê¤¤¡£\n"
-"\n"
-"\n"
-"1. ¥é¥¤¥»¥ó¥¹Æ±°Õ»ö¹à\n"
-"\n"
-"¤³¤Îʸ½ñ¤ò¿µ½Å¤ËÆɤó¤Ç¤¯¤À¤µ¤¤¡£ËÜʸ½ñ¤Ï¤¢¤Ê¤¿¤ÈMandrake S.A.¤È¤Î´Ö¤Ç\n"
-"Äù·ë¤µ¤ì¤ë¡¢¥½¥Õ¥È¥¦¥§¥¢À½ÉʤËŬÍѤµ¤ì¤ë¥é¥¤¥»¥ó¥¹Æ±°Õ»ö¹à¤Ç¤¹¡£\n"
-"¥½¥Õ¥È¥¦¥§¥¢À½Éʤò¤¤¤«¤Ê¤ë·Á¤Ç¤¢¤ì¥¤¥ó¥¹¥È¡¼¥ë¡¢Ê£À½¡¢»ÈÍѤ¹¤ë¤³¤È¤Ç\n"
-"¤¢¤Ê¤¿¤ÏÌÀ¼¨Åª¤Ë¡¢Ëܥ饤¥»¥ó¥¹¤ÎÁ´¾ò·ï¤ä¾ò¹à¤Ë½¾¤¦¤³¤È¤ò¼õ¤±Æþ¤ì\n"
-"´°Á´¤ËƱ°Õ¤·¤¿¤â¤Î¤È¤µ¤ì¤Þ¤¹¡£\n"
-"Ëܥ饤¥»¥ó¥¹¤Î¤¤¤«¤Ê¤ëÉôʬ¤Ç¤¢¤ìƱ°Õ¤Ç¤­¤Ê¤±¤ì¤Ð¡¢¥½¥Õ¥È¥¦¥§¥¢À½ÉʤÎ\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¡¢Ê£À½¡¢»ÈÍѤÏǧ¤á¤é¤ì¤Þ¤»¤ó¡£\n"
-"Ëܥ饤¥»¥ó¥¹¤Î¾ò¹à¤ä¾ò·ï¤ËŬ¹ç¤·¤Ê¤¤·Á¤Ç¥½¥Õ¥È¥¦¥§¥¢À½Éʤò¥¤¥ó¥¹¥È¡¼¥ë\n"
-"Ê£À½¡¢ÍøÍѤ·¤è¤¦¤È¤¹¤ë»î¤ß¤Ï̵¸ú¤Ç¤¢¤ê¡¢Ëܥ饤¥»¥ó¥¹²¼¤Ç¤Î¤¢¤Ê¤¿¤Î¸¢Íø\n"
-"¤òÇíÃ¥¤¹¤ë¤³¤È¤È¤Ê¤ê¤Þ¤¹¡£¥é¥¤¥»¥ó¥¹¤ÎÇË´þ¤Ëȼ¤¤¡¢¤¢¤Ê¤¿¤Ï¥½¥Õ¥È¥¦¥§¥¢\n"
-"À½ÉʤÎÊ£À½¤¹¤Ù¤Æ¤ò¨ºÂ¤ËÇ˲õ¤·¤Ê¤±¤ì¤Ð¤Ê¤ê¤Þ¤»¤ó¡£\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "¥­¡¼¥Ü¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È¤Ï²¿¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "»È¤¨¤ë¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È¤Î°ìÍ÷¤òɽ¼¨¤·¤Þ¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "¤É¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¯¥é¥¹¤ò˾¤ß¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë/¹¹¿·"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤¹¤«¡¤¹¹¿·¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "¿ä¾©"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "¥¨¥­¥¹¥Ñ¡¼¥È"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "¹¹¿·"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤À¤±¤ò¹¹¿·"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "¥Þ¥¦¥¹¤Î·¿¤Ï¤Ê¤ó¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "¥Þ¥¦¥¹¥Ý¡¼¥È"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "¥Þ¥¦¥¹¤Ï¤É¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "¥Ü¥¿¥ó¥¨¥ß¥å¥ì¡¼¥·¥ç¥ó"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "¥Ü¥¿¥ó2¤Î¥¨¥ß¥å¥ì¡¼¥·¥ç¥ó"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "¥Ü¥¿¥ó3¤Î¥¨¥ß¥å¥ì¡¼¥·¥ç¥ó"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA¥«¡¼¥É¤ÎÀßÄêÃæ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE ¤ÎÀßÄê"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "»È¤¨¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥¹¥­¥ã¥ó¤·¤Æ¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤òõ¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤ÎÁªÂò"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤¬Æɤá¤Þ¤»¤ó¡¤²õ¤ì¤Æ¤¤¤ë¤è¤¦¤Ç¤¹:(\n"
-"ÉÔÀµ¤Ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾Ã¤·¤Æ¤ß¤Þ¤·¤ç¤¦¤«¡©¡Ê¤³¤ì¤À¤È¥Ç¡¼¥¿¤¬Á´Éô¾Ã¤¨¤Þ"
-"¤¹¡ª¡Ë\n"
-"¤¢¤ë¤¤¤Ï¡¢DrakX¤Ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÊѹ¹¤µ¤»¤Ê¤¤¼ê¤¬¤¢¤ê¤Þ¤¹¡£\n"
-"(¥¨¥é¡¼¤Ï%s¤Ç¤¹)\n"
-"\n"
-"Á´¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¾Ãµî¤·¤Æ¤è¤í¤·¤¤¤Ç¤¹¤Í¡©\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ¤Ï¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤òÀµ¤·¤¯Æɤá¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-"¤³¤³¤«¤éÀè¤Ï²¿¤¬µ¯¤­¤Æ¤â¤·¤ê¤Þ¤»¤ó¤è¡ª"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"1MB ¥Ö¡¼¥È¥¹¥È¥é¥Ã¥×ÍѤζõ¤­¥¹¥Ú¡¼¥¹¤¬¤¢¤ê¤Þ¤»¤ó¡ª¡¡¥¤¥ó¥¹¥È¡¼¥ë¤Ï³¤±¤Þ¤¹"
-"¤¬¡¢¥·¥¹¥Æ¥à¤Îµ¯Æ°¤Ë¤Ï DiskDrake ¤Ç¥Ö¡¼¥Ä¥¹¥È¥é¥Ã¥×¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤Ã¤Æ¤¯¤À"
-"¤µ¤¤."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "¹¹¿·¤Ç¤­¤ë¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "¥·¥¹¥Æ¥à¤Î¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó(/) ¤Ï¤Ê¤ó¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤ÎÊѹ¹¤òÈ¿±Ç¤¹¤ë¤Ë¤Ï¥ê¥Ö¡¼¥È¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥È¤¹¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "ÉÔÎÉ¥Ö¥í¥Ã¥¯¤ò¸¡ºº¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "¥Õ¥¡¥¤¥ë %s ¤ÎºîÀ®¤È¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Ë½½Ê¬¤Ê¥¹¥ï¥Ã¥×¤¬¤¢¤ê¤Þ¤»¤ó¡¤¥¹¥ï¥Ã¥×¤ò²Ã¤¨¤Æ²¼¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "¼ê»ý¤Á¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "¥¢¥Ã¥×¥°¥ì¡¼¥É¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ë¤ä¥¢¥Ã¥×¥°¥ì¡¼¥É¤ËɬÍפʥǥ£¥¹¥¯¤Î¶õ¤­ÍÆÎ̤¬ÉÔ­¤Ç¤¹¡£ (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "´°Á´ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "ºÇ¾® (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "¿ä¾© (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"¥Õ¥í¥Ã¥Ô¡¼¤Ø¤Î¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤ÎÊݸ¤«Æɤ߹þ¤ß¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"·Á¼°¤Ï auto_install ¤ÇÀ¸À®¤·¤¿¥Õ¥í¥Ã¥Ô¡¼¤ÈƱ¤¸¤Ç¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤«¤éÆɤ߹þ¤à"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤«¤éÆɤ߹þ¤ßÃæ"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤òÁªÂò"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤ÎÆþ¤Ã¤¿¥Õ¥í¥Ã¥Ô¡¼¤òÁÞÆþ"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤Ë¥»¡¼¥Ö¤¹¤ë"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Áª¤ó¤À¤â¤Î¤Î¥µ¥¤¥º¤Ï¶õ¤­¥¹¥Ú¡¼¥¹¤ò±Û¤¨¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Î¼ïÎà"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"¥Ñ¥Ã¥±¡¼¥¸¥°¥ë¡¼¥×¤¬Áª¤Ð¤ì¤Æ¤¤¤Þ¤»¤ó¡£\n"
-"ºÇÄã¸ÂÍߤ·¤¤¥¤¥ó¥¹¥È¡¼¥ë¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X ¤ò»È¤¦"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "´ðËÜŪ¤Ê¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó¤òÆþ¤ì¤ë¡Ê¿ä¾©¡ª¡Ë"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "ËÜÅö¤ËºÇÄã¸Â¤Î¥¤¥ó¥¹¥È¡¼¥ë¡Êurpmi ¤â¤Ê¤·¡Ë"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"¾åµ­¤Î°ìÍ÷¤ÎCD¤¬¤¹¤Ù¤Æ¤½¤í¤Ã¤Æ¤¤¤ì¤Ð¡¢Ok¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-"CD¤¬°ì¤Ä¤â¤Ê¤±¤ì¤Ð¡¢¥­¥ã¥ó¥»¥ë¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¼ê¸µ¤Ë¤Ê¤¤CD¤¬¤¢¤ì¤Ð¡¢¤½¤ì¤òÁªÂò¤«¤é¤Ï¤º¤·¤Æ¤«¤éOk¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "¡Ö %s ¡×¤È¤¤¤¦Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Î½àÈ÷"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"¥Ñ¥Ã¥±¡¼¥¸ %s ¤ò¥¤¥ó¥¹¥È¡¼¥ë\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëÀßÄê¤ò³ÎÄê"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "»È¤Ã¤¿µ¯Æ°¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "¹¹¿·¥â¥¸¥å¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ¤·¤Æ²¼¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"¤µ¤¢¡¢°Å¹æ²½ÍѤΥ½¥Õ¥È¤ò¥À¥¦¥ó¥í¡¼¥É¤¹¤ë½àÈ÷¤¬¤Ç¤­¤Þ¤·¤¿¡£\n"
-"\n"
-"·Ù¹ð:\n"
-"\n"
-"¤³¤ì¤é¤Î¥½¥Õ¥È¤ËÂФ¹¤ëÍ×·ï¤ä¡¢³ÆÃϤÎË¡À©Å٤ΤÁ¤¬¤¤¤¬¤¤¤í¤¤¤í¤¢¤ë¤Î¤Ç¡¢\n"
-"¤³¤Î¥½¥Õ¥È¤Î¤ªµÒÍͤ䥨¥ó¥É¥æ¡¼¥¶¤Ï¡¢¼«Ê¬¤Î½ê°¤¹¤ëË¡À©Å٤Τâ¤È¤Ç¡¢¤³¤¦\n"
-"¤·¤¿¥½¥Õ¥È¤Î¥À¥¦¥ó¥í¡¼¥É¤äÊݸ¡¢»ÈÍѤʤɤ¬Ç§¤á¤é¤ì¤Æ¤¤¤ë¤«¤É¤¦¤«¤ò¼«Ê¬\n"
-"¤Ç³Îǧ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¤µ¤é¤Ë¤ªµÒÍͤ䥨¥ó¥É¥æ¡¼¥¶¤Ï¡¢¼«Ê¬¤Î½ê°¤¹¤ëË¡À©ÅÙ¤ÎË¡µ¬À©¤Ë°ãÈ¿¤·¤Ê¤¤\n"
-"¤è¤¦¤è¤¯Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£¤ªµÒÍͤ䥨¥ó¥É¥æ¡¼¥¶¤¬³ºÅö¤¹¤ëË¡µ¬À©¤Îµ¬Äê¤ò\n"
-"º½Å¤·¤Ê¤¤¾ì¹ç¤Ë¤Ï¡¢¿¼¹ï¤Ê½èȳÂоݤȤʤë´í¸±¤ò¤ª¤«¤¹¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"\n"
-"¤³¤ÎƱ°Õ½ñ¤Ë½ð̾¤·¤¿¸å¤Ë¸ÜµÒ¤ä¥¨¥ó¥É¥æ¡¼¥¶¤¬¥¢¥¯¥»¥¹¤¹¤ë¸«¹þ¤ß¤Î¤¢¤ë¡¢\n"
-"¤³¤ì¤é¤Î¥½¥Õ¥È¥¦¥§¥¢¤ò»È¤¤¡¢ÊÝ»ý¤·¡¢¤¢¤ë¤¤¤Ï¥À¥¦¥ó¥í¡¼¥É¤¹¤ë¤³¤È¤Ë¤è¤ë\n"
-"Æü졢´ÖÀÜ¡¢¶öȯ¤Ê¤É°ìÀڤλ³²¡Ê¤³¤ì¤Ë¤ÏÇä¾å»¼º¡¢¶È̳¤ÎÄä»ß¡¢¾¦Íѥǡ¼¥¿¤Î\n"
-"ÁÓ¼º¤ä´ØϢ»¼º¤ÈË¡ÄîȽÃǤ˴ð¤Å¤¯Â»³²Çå½þ¤äÊä½þ¶â»Ùʧ¤¤¤Ê¤É¤¬´Þ¤Þ¤ì¤ë¤¬\n"
-"¤³¤ì¤Ë¸Â¤é¤ì¤ë¤â¤Î¤Ç¤Ï¤Ê¤¤¡Ë¤Ë¤Ä¤¤¤Æ¡¢Mandrakesoft ¤ä¤½¤ÎÀ½Â¤¶È¼Ô¤ä\n"
-"¥µ¥×¥é¥¤¥ä¤Ï¤¤¤«¤Ê¤ë¾ì¹ç¤Ë¤â¤Ê¤ó¤éÀÕǤ¤ò»ý¤¿¤Ê¤¤¡£\n"
-"\n"
-"°Ê¾å¤Î¼è¤ê·è¤á¤Ë¤Ä¤¤¤Æ¤ÎÌ䤤¹ç¤ï¤»¤Ï¡¢°Ê²¼¤ËÏ¢Íí¤Î¤³¤È¡§\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¸ø³«»þ°Ê¹ß¤Ë¹¹¿·¤µ¤ì¤¿¥Ñ¥Ã¥±¡¼¥¸¤ò\n"
-"¥À¥¦¥ó¥í¡¼¥É¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¥»¥­¥å¥ê¥Æ¥£¥Õ¥£¥Ã¥¯¥¹¤ä¥Ð¥°¥Õ¥£¥Ã¥¯¥¹¤¬ÆÀ¤é¤ì¤Þ¤¹¤¬¡¢\n"
-"¤³¤ì¤Ë¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¬É¬ÍפǤ¹¡£\n"
-"\n"
-"¹¹¿·¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Mandrake Linux ¥µ¥¤¥È¤ËÀܳ¤·¤Æ¥ß¥é¡¼°ìÍ÷¤ò¼èÆÀ¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "¤É¤Î¥µ¥¤¥È¤«¤é¥Ñ¥Ã¥±¡¼¥¸¤ò»ý¤Ã¤Æ¤¯¤ë¤«¤òÁªÂò"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "¥µ¥¤¥È¤ËÀܳ¤·¤Æ¥Ñ¥Ã¥±¡¼¥¸°ìÍ÷¤ò¼èÆÀ¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "¤¢¤Ê¤¿¤Î»þ´ÖÂӤϤɤì¤Ç¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "¥Ï¡¼¥É¥¦¥§¥¢¥¯¥í¥Ã¥¯¤Ï GMT ¤Ë¥»¥Ã¥È¤·¤Æ¤¢¤ê¤Þ¤¹"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "¼«Æ°»þ´Ö¤¢¤ï¤»¡ÊNTP¤ò»È¤¦¡Ë"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ¥µ¡¼¥Ð"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "¥ê¥â¡¼¥ÈCUPS ¥µ¡¼¥Ð"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "¥×¥ê¥ó¥¿¤Ê¤·"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "ISA ¥µ¥¦¥ó¥É¥«¡¼¥É¤Ï¤¢¤ê¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ë¡Ösndconfig¡×¤ò¼Â¹Ô¤·¤Æ¥µ¥¦¥ó¥É¥«¡¼¥É¤òÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"¥µ¥¦¥ó¥É¥«¡¼¥É¤¬¸¡½Ð¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ë¡Öharddrake¡×¤ò»î¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "¤Þ¤È¤á"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "¥Þ¥¦¥¹"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "»þ´ÖÂÓ"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "¥×¥ê¥ó¥¿"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN¥«¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "¥µ¥¦¥ó¥É¥«¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "¥Æ¥ì¥Ó¥«¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "¥í¡¼¥«¥ë¥Õ¥¡¥¤¥ë"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "¥ë¡¼¥È¥Ñ¥¹¥ï¡¼¥É"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤Ê¤·"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "¤³¤Î¥Ñ¥¹¥ï¡¼¥É¤Ï´Êñ¤¹¤®¤Þ¤¹¡ÊºÇÄã¤Ç¤â %d ʸ»ú»È¤Ã¤Æ¤¯¤À¤µ¤¤¡Ë"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "ǧ¾Ú"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "ǧ¾ÚLDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP¥Ù¡¼¥¹dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP¥µ¡¼¥Ð"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "ǧ¾ÚNIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS ¥É¥á¥¤¥ó"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ¥µ¡¼¥Ð"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"¥«¥¹¥¿¥à¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤¬¤¢¤ë¤È¡¢Ä̾ï¤Î¥Ö¡¼¥È¥í¡¼¥À¤ò»È¤ï¤º¤Ë Linux ¤ò\n"
-"µ¯Æ°¤Ç¤­¤Þ¤¹¡£SILO ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¯¤Ê¤¤¾ì¹ç¤ä¡¢Â¾¤Î OS ¤¬\n"
-" SILO ¤òºï½ü¤¹¤ë¾ì¹ç¡¢¤Þ¤¿¤Ï¥Ï¡¼¥É¥¦¥§¥¢ÀßÄê¤Î¤¿¤á SILO ¤¬¤¦¤Þ¤¯ºîÆ°\n"
-"¤·¤Ê¤¤¾ì¹ç¤Ë»ÈÍѤǤ­¤Þ¤¹¡£\n"
-"¥«¥¹¥¿¥à¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤Ï¡¢Mandrake ¤Î¥·¥¹¥Æ¥àÉüµìÍѤΥ쥹¥­¥å¡¼¥¤¥á¡¼¥¸\n"
-"¤È¤·¤Æ¤â»ÈÍѤǤ­¤Þ¤¹¡£¤³¤ì¤¬¤¢¤ì¤Ð¥·¥¹¥Æ¥à¤¬´íµ¡¤Ë¤ª¤Á¤¤¤Ã¤¿¤È¤­¤Ë\n"
-"Éüµì¤¹¤ë¤Î¤¬³Ú¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-"¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤òºî¤ë¤Ê¤é¤Ð¡¢¥Õ¥í¥Ã¥Ô¥£¥Ç¥£¥¹¥¯¤ò¥É¥é¥¤¥Ö¤ËÁÞÆþ¤·¡¢\n"
-"¡ÖOK¡×¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "ºÇ½é¤Î¥Õ¥í¥Ã¥Ô¡¼¥É¥é¥¤¥Ö"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "ÆóÈÖÌܤΥեí¥Ã¥Ô¡¼¥É¥é¥¤¥Ö"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "¥¹¥­¥Ã¥×"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"¥«¥¹¥¿¥à¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤¬¤¢¤ë¤È¡¢Ä̾ï¤Î¥Ö¡¼¥È¥í¡¼¥À¤ò»È¤ï¤º¤Ë Linux ¤ò\n"
-"µ¯Æ°¤Ç¤­¤Þ¤¹¡£LILO (¤Þ¤¿¤ÏGRUB)¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¯¤Ê¤¤¾ì¹ç¤ä¡¢Â¾¤Î OS ¤¬\n"
-" LILO ¤òºï½ü¤¹¤ë¾ì¹ç¡¢¤Þ¤¿¤Ï¥Ï¡¼¥É¥¦¥§¥¢ÀßÄê¤Î¤¿¤á LILO ¤¬¤¦¤Þ¤¯ºîÆ°\n"
-"¤·¤Ê¤¤¾ì¹ç¤Ë»ÈÍѤǤ­¤Þ¤¹¡£\n"
-"¥«¥¹¥¿¥à¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤Ï¡¢Mandrake ¤Î¥·¥¹¥Æ¥àÉüµìÍѤΥ쥹¥­¥å¡¼¥¤¥á¡¼¥¸\n"
-"¤È¤·¤Æ¤â»ÈÍѤǤ­¤Þ¤¹¡£¤³¤ì¤¬¤¢¤ì¤Ð¥·¥¹¥Æ¥à¤¬´íµ¡¤Ë¤ª¤Á¤¤¤Ã¤¿¤È¤­¤Ë\n"
-"Éüµì¤¹¤ë¤Î¤¬³Ú¤Ë¤Ê¤ê¤Þ¤¹¡£¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤òºî¤ê¤Þ¤¹¤«¡©\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(·Ù¹ð¡ª¡¡root ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë XFS ¤ò»È¤Ã¤Æ¤¤¤Þ¤¹¤Í¡£\n"
-"1.44 Mb ¥Õ¥í¥Ã¥Ô¡¼¤Çµ¯Æ°¥Ç¥£¥¹¥¯¤òºî¤ë¤Î¤Ï¤¿¤Ö¤ó̵Íý¤Ç¤¹¡£\n"
-"XFS ¤Ï¤È¤Æ¤âÂ礭¤Ê¥É¥é¥¤¥Ð¤¬É¬ÍפÀ¤«¤é¤Ç¤¹)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Í­¸ú¤Ê¥Õ¥í¥Ã¥Ô¡¼¥É¥é¥¤¥Ö¤¬¤¢¤ê¤Þ¤»¤ó¡¤¤´¤á¤ó¤Ê¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤òºî¤ê¤¿¤¤¥Õ¥í¥Ã¥Ô¥£¥É¥é¥¤¥Ö¤òÁªÂò"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤ÎºîÀ®"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Î½àÈ÷"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"¤È¤Æ¤â¸Å¤¤¤«¡¢Ì¤ÃΤΥޥ·¥ó¤ò»È¤Ã¤Æ¤¤¤ë¤è¤¦¤Ç¤¹¤Í¡£\n"
-"yaboot ¥Ö¡¼¥È¥í¡¼¥À¤Ï¤³¤ì¤Ç¤Ï»È¤¨¤Þ¤»¤ó¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¤Ï³¤±¤Þ¤¹¤¬¡¢¥Þ¥·¥ó¤Îµ¯Æ°¤Ë¤Ï\n"
-"BootX ¤ò»È¤Ã¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot ¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot ¥¤¥ó¥¹¥È¡¼¥ë»þ¤Ë¥¨¥é¡¼È¯À¸¡£\n"
-"̵Íý¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤ß¤Þ¤¹¤«¡©¡¡¤¿¤À¤·ºÇ½é¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬Ç˲õ¤µ¤ì¤Þ¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¥¤¥ó¥¹¥È¡¼¥ëÃæ"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "¥Ö¡¼¥È¥í¡¼¥À¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¼ºÇÔ¤·¤Þ¤·¤¿¡£°Ê²¼¤Î¥¨¥é¡¼¤¬È¯À¸:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"¥ª¡¼¥×¥ó¥Õ¥¡¡¼¥à¥¦¥§¥¢µ¯Æ°¥Ç¥Ð¥¤¥¹¤òÊѹ¹¤·¤Ê¤¤¤È¡¢¥Ö¡¼¥È¥í¡¼¥À¤¬\n"
-"Í­¸ú¤Ë¤Ê¤é¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£ºÆµ¯Æ°¤·¤Æ¥Ö¡¼¥È¥í¡¼¥À¤Î¥×¥í¥ó¥×¥È\n"
-"¤¬½Ð¤Ê¤«¤Ã¤¿¤é¡¢ºÆµ¯Æ°»þ¤Ë Command-Option-O-F ¤ò²¡¤·¤Æ¤³¤¦ÆþÎϤ·¤Þ¤¹:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" ¤½¤ì¤«¤é¤³¤¦¥¿¥¤¥×¤·¤Þ¤¹: shut-down\n"
-"¼¡¤Îµ¯Æ°»þ¤Ë¤Ï¥Ö¡¼¥È¥í¡¼¥À¤Î¥×¥í¥ó¥×¥È¤¬½Ð¤ë¤Ï¤º¤Ç¤¹¡£"
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "¶õ¤Î¥Õ¥í¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö %s ¤ËÁÞÆþ¤·¤Æ²¼¤µ¤¤"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤Î¼«Æ°ºîÀ®"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"¤¤¤¯¤Ä¤«¤Î¥¤¥ó¥¹¥È¡¼¥ë¥¹¥Æ¥Ã¥×¤¬ÉÔ´°Á´¤Ç¤¹¡£\n"
-"\n"
-"ËÜÅö¤Ë½ªÎ»¤·¤Þ¤¹¤«¡©"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"¤ª¤á¤Ç¤È¤¦¤´¤¶¤¤¤Þ¤¹!¡¡¥¤¥ó¥¹¥È¡¼¥ë´°Î»¤Ç¤¹¡£\n"
-"¥Ö¡¼¥ÈÍÑ¥á¥Ç¥£¥¢¤òÈ´¤¤¤Æ¡¢¥ê¥¿¡¼¥ó¤ò²¡¤·¤ÆºÆµ¯Æ°¤·¤Æ²¼¤µ¤¤¡£\n"
-"\n"
-"\n"
-"¤³¤Î¥Ð¡¼¥¸¥ç¥ó¤Î Mandrake Linux ¤Î¥Ð¥°½¤Àµ¾ðÊó¤Ï¡¢\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3 ¤ÇÄ´¤Ù¤é¤ì¤Þ¤¹¡£\n"
-"\n"
-"\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¸å¤ÎÀßÄê¤Ë¤Ä¤¤¤Æ¤Ï¥æ¡¼¥¶¥¬¥¤¥É¤Î¡Ö¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¸å¡×¤Î\n"
-"¾Ï¤ò»²¾È¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤Î¼«Æ°ºîÀ®"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¤Ï¡¢´õ˾¼¡Âè¤ÇÅ°ÄìŪ¤Ë¼«Æ°²½¤Ç¤­¤Þ¤¹¡£\n"
-"¤³¤Î¾ì¹ç¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Ï´°Á´¤Ë½ñ¤­´¹¤¨¤é¤ì¤Þ¤¹¤è¡ª\n"
-"(¤³¤ì¤ÏÊ̤Υޥ·¥ó¤Ø¤Î¥¤¥ó¥¹¥È¡¼¥ëÍѤΤâ¤Î¤Ç¤¹).\n"
-"\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Á´¼«Æ°"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "ºÆÀ¸"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¤ÎÊݸ"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ¥¤¥ó¥¹¥È¡¼¥ë %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> Í×ÁǴ֤ΰÜÆ°  | <Space> ÁªÂò | <F12> ¼¡¤Î²èÌÌ "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper ¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "¥Õ¥¡¥¤¥ë¤òÁªÂò"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "¹âÅÙ¤ÊÁªÂò"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "´ðËÜ"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "¤ªÂÔ¤Á²¼¤µ¤¤"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "¾ðÊó"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "¥Ä¥ê¡¼¤ò¤Î¤Ð¤¹"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "¥Ä¥ê¡¼¤ò½Ì¤á¤ë"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "¤½¤Î¤Þ¤Þ¤È¥°¥ë¡¼¥×Ê̤òÀÚ¤êÂؤ¨"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "ÉÔÀµ¤ÊÁªÂò¡¤¤â¤¦°ìÅٻ¤Æ²¼¤µ¤¤\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "¤É¤ì¤Ë¤·¤Þ¤¹¤«¡©¡Ê¥Ç¥Õ¥©¥ë¥È¤Ï %s¡Ë"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"°Ê²¼¤Î¥¨¥ó¥È¥ê¤âÆþÎϤ·¤Æ¤¯¤À¤µ¤¤:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "¤É¤ì¤Ë¤·¤Þ¤¹¤«¡©¡Ê0/1, ¥Ç¥Õ¥©¥ë¥È¤Ï %s¡Ë"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "¥Ü¥¿¥ó¡Ö%s¡×: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "¤³¤Î¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¤«¡©"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "¤É¤ì¤Ë¤·¤Þ¤¹¤«¡©¡Ê¥Ç¥Õ¥©¥ë¥È¤Ï `%s'%s¡Ë"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> ÁªÂò»è¤Ï¤¤¤í¤¤¤í¤¢¤ê¤Þ¤¹ (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"10¤Î¤Ê¤«¤Ç¤É¤ì¤òÊÔ½¸¤·¤¿¤¤¤«ºÇ½é¤Î¿ô»ú¤òÆþ¤ì¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤¢¤ë¤¤¤Ïñ¤Ë Enter ¤ò²¡¤»¤ÐÀè¤Ë¿Ê¤ß¤Þ¤¹¡£\n"
-"¤É¤ì¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Ãí°Õ¡¢¥é¥Ù¥ë¤¬ÊѤï¤ê¤Þ¤·¤¿:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "ÅÐÏ¿¤·¤Ê¤ª¤·"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "¥Á¥§¥³ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "¥É¥¤¥Ä"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "¥¹¥Ú¥¤¥ó"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "¥Õ¥£¥ó¥é¥ó¥É"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "¥Õ¥é¥ó¥¹"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "¥Î¥ë¥¦¥§¡¼"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "¥Ý¡¼¥é¥ó¥É"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "¥í¥·¥¢"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "¥¹¥¦¥§¡¼¥Ç¥ó"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "¥¤¥®¥ê¥¹¼°¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "¥¢¥á¥ê¥«¼°¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "¥¢¥ë¥Ð¥Ë¥¢"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "¥¢¥ë¥á¥Ë¥¢¡Ê¸Å¤¤¡Ë"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "¥¢¥ë¥á¥Ë¥¢¡Ê¥¿¥¤¥×¥é¥¤¥¿¡¼¡Ë"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "¥¢¥ë¥á¥Ë¥¢¡Êȯ²»µ­¹æ¡Ë"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "¥¢¥¼¥ë¥Ð¥¤¥¸¥ã¥ó(¥é¥Æ¥ó)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "¥Ù¥ë¥®¡¼"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "¥¢¥ë¥á¥Ë¥¢¡Êȯ²»µ­¹æ¡Ë"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "¥Ö¥ë¥¬¥ê¥¢ (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "¥Ö¥é¥¸¥ë"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "¥Ù¥é¥ë¡¼¥·"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "¥¹¥¤¥¹¡Ê¥É¥¤¥Ä¼°ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "¥¹¥¤¥¹¡Ê¥Õ¥é¥ó¥¹¼°ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "¥Á¥§¥³ (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "¥É¥¤¥Ä¡Ê¥Ç¥Ã¥É¥­¡¼¤Ê¤·¡Ë"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "¥Ç¥ó¥Þ¡¼¥¯"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (¥Î¥ë¥¦¥§¡¼)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (¥¹¥¦¥§¡¼¥Ç¥ó)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "¥¨¥¹¥È¥Ë¥¢"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "¥°¥ë¥¸¥¢¡Ê¡Ö¥í¥·¥¢¼°¡×ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "¥°¥ë¥¸¥¢¡Ê¡Ö¥é¥Æ¥ó¡×ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "¥®¥ê¥·¥ã"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "¥Ï¥ó¥¬¥ê¡¼"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "¥¯¥í¥¢¥Á¥¢"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "¥¤¥¹¥é¥¨¥ë"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "¥¤¥¹¥é¥¨¥ë¡Êȯ²»µ­¹æ¡Ë"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "¥¤¥é¥ó"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "¥¢¥¤¥¹¥é¥ó¥É"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "¥¤¥¿¥ê¥¢"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ÆüËܸì106¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Ä«Á¯¼°¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "¥é¥Æ¥ó¥¢¥á¥ê¥«"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "¥ê¥È¥¢¥Ë¥¢ AZERTY (µì)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "¥ê¥È¥¢¥Ë¥¢ AZERTY (¿·)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "¥ê¥È¥¢¥Ë¥¢ ¡Ö¿ô»úÎó¡× QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "¥ê¥È¥¢¥Ë¥¢ ¡Öȯ²»¡× QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "¥é¥È¥ô¥£¥¢"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "¥Þ¥±¥É¥Ë¥¢"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "¥ª¥é¥ó¥À"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "¥Ý¡¼¥é¥ó¥É¡Êqwerty ÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "¥Ý¡¼¥é¥ó¥É¡ÊqwertzÇÛÎó¡Ë"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "¥Ý¥ë¥È¥¬¥ë"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "¥«¥Ê¥À¡Ê¥±¥Ù¥Ã¥¯¡Ë"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "¥ë¡¼¥Þ¥Ë¥¢¡Êqwertz¡Ë"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "¥ë¡¼¥Þ¥Ë¥¢¡Êqwerty¡Ë"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "¥í¥·¥¢¡ÊYawerty¡Ë"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "¥¹¥í¥Ù¥Ë¥¢"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "¥¹¥í¥Ð¥­¥¢ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "¥¹¥í¥Ð¥­¥¢ (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "¥»¥ë¥Ó¥¢(cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "¥¿¥ß¥ë"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "¥¿¥¤¡¡¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "¥¿¥¸¥¯¡¡¥­¡¼¥Ü¡¼¥É"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "¥È¥ë¥³¡ÊÅÁÅýŪ¡Ö£Æ¡×¥â¥Ç¥ë¡Ë"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "¥È¥ë¥³¡Ê¸½Âå¡Ö£Ñ¡×¥â¥Ç¥ë¡Ë"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "¥¦¥¯¥é¥¤¥Ê"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "¥¢¥á¥ê¥«¼°¥­¡¼¥Ü¡¼¥É¡Ê¹ñºÝ¼°¡Ë"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "¥Ù¥È¥Ê¥à ¡Ö¿ô»úÎó¡× QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "¥æ¡¼¥´¥¹¥é¥Ó¥¢¡Ê¥é¥Æ¥ó¡Ë"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "±¦ Alt ¥­¡¼"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "º¸±¦¤Î¥·¥Õ¥È¥­¡¼¤òƱ»þ¤Ë"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control ¤È¥·¥Õ¥È¤òƱ»þ¤Ë"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock ¥­¡¼"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl ¤È Alt ¥­¡¼¤òƱ»þ¤Ë"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt ¤È¥·¥Õ¥È¥­¡¼¤òƱ»þ¤Ë"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "¡Ö¥á¥Ë¥å¡¼¡×¥­¡¼"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "º¸¡Ö¥¦¥£¥ó¥É¥¦¥º¡×¥­¡¼"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "±¦¡Ö¥¦¥£¥ó¥É¥¦¥º¡×¥­¡¼"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "½ä²ó¥Þ¥¦¥ó¥È %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "¤Þ¤ºÏÀÍý¥Ü¥ê¥å¡¼¥à¤òºï½ü¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"2.2¥«¡¼¥Í¥ëÍѤΠPCMCIA ¥µ¥Ý¡¼¥È¤Ï¤â¤¦´Þ¤Þ¤ì¤Æ¤¤¤Þ¤»¤ó¡£\n"
-"2.4¡¡¥«¡¼¥Í¥ë¤ò»È¤Ã¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - ¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ÈÆÍÑ PS/2 ¥Û¥¤¡¼¥ë¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 ¥Ü¥¿¥ó"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "ÈÆÍѤÎ2¥Ü¥¿¥ó¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "ÈÆÍÑ"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "¥Û¥¤¡¼¥ë"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "¥Þ¥¤¥¯¥í¥½¥Õ¥È¡¦¥¤¥ó¥Æ¥ê¥Þ¥¦¥¹¡Ê¥·¥ê¥¢¥ë¡Ë"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "ÈÆÍѤÎ3¥Ü¥¿¥ó¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "¥Þ¥¤¥¯¥í¥½¥Õ¥È¡¦¥¤¥ó¥Æ¥ê¥Þ¥¦¥¹¡ÊPS/2¡Ë"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC ¥·¥ê¡¼¥º (¥·¥ê¥¢¥ë)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (¥·¥ê¥¢¥ë, ¸Å¤¤ C7 ¥¿¥¤¥×)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "¥Ð¥¹¥Þ¥¦¥¹"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2¥Ü¥¿¥ó"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3¥Ü¥¿¥ó"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "¤Ê¤·"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "¥Þ¥¦¥¹¤Ê¤·"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "¥Þ¥¦¥¹¤òÍ­¸ú¤Ë¤¹¤ë¤Ë¤Ï¡¢"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "¥Û¥¤¡¼¥ë¤òÆ°¤«¤·¤Æ¤¯¤À¤µ¤¤¡ª"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-"adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-1,-*-fixed-medium-r-"
-"normal--24-*-100-100-c-*-jisx0208.1983-0,*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "´°Î»"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "¼¡ ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ¤â¤É¤ë"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Àµ¤·¤¯É½¼¨½ÐÍè¤Þ¤·¤¿¤«¡©"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ØÀܳ"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"adsl ¤ËÀܳ¤¹¤ë¤Õ¤Ä¤¦¤Î¤ä¤êÊý¤Ï¡¢pppoe¤Ç¤¹¡£\n"
-"¤Ç¤â¡¢pptp¤ä¡¢dhcp¤·¤«»È¤ï¤Ê¤¤Àܳ¤â¤¢¤ê¤Þ¤¹¡£\n"
-"¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¡Öpppoe¤ò»È¤¦¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp¤ò»È¤¦"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe¤ò»È¤¦"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp¤ò»È¤¦"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¤É¤Îdhcp¥¯¥é¥¤¥¢¥ó¥È¤ò»È¤¤¤Þ¤¹¤«¡©\n"
-"¥Ç¥Õ¥©¥ë¥È¤Ï dhcpcd¤Ç¤¹"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"¥·¥¹¥Æ¥à¾å¤Ë¥¤¡¼¥µ¥Í¥Ã¥È¥¢¥À¥×¥¿¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£¤³¤Î¼ïÎà¤Î\n"
-"Àܳ¤ÏÀßÄê¤Ç¤­¤Þ¤»¤ó¡£"
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¿¡¼¥Õ¥§¥¤¥¹¤ÎÁªÂò"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Ë»È¤¦¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤òÁª¤Ó¤Þ¤·¤ç¤¦"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥«¡¼¥É¤¬¸«ÉÕ¤«¤ê¤Þ¤»¤ó"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"¥Û¥¹¥È̾¤¬Ê¬¤«¤ë¤Ê¤é¡¢¤½¤ì¤òÆþÎϤ·¤Æ²¼¤µ¤¤¡£\n"
-"¤¤¤¯¤Ä¤«¤ÎDHCP¥µ¡¼¥Ð¤ÏÆ°ºî¤¹¤ë¤Î¤Ë¥Û¥¹¥È̾¤òɬÍפȤ·¤Þ¤¹¡£\n"
-"¥Û¥¹¥È̾¤Ï¡Èmybox.mylab.myco.com¡É¤Î¤è¤¦¤ËÀ©¸Â¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "¥Û¥¹¥È̾:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄꥦ¥£¥¶¡¼¥É"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "³°ÉÕ ISDN ¥â¥Ç¥à"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Æâ¢ISDN¥«¡¼¥É"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¤É¤Î¼ïÎà¤ÎISDNÀܳ¤Ç¤¹¤«¡©"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"¤É¤ÎISDN ÀßÄ꤬¤¤¤¤¤Ç¤¹¤«?\n"
-"\n"
-"* ¸Å¤¤ÀßÄê¤Ï isdn4net ¤ò»È¤¤¤Þ¤¹¡£¶¯ÎϤʥġ¼¥ë¤¬¤¢¤ê¤Þ¤¹¤¬¡¢\n"
-"  ½é¿´¼Ô¤Ë¤ÏÀßÄ꤬¤à¤º¤«¤·¤¤¤·¡¢É¸½à¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó¡£\n"
-"\n"
-"* ¿·¤·¤¤ÀßÄê¤Ï¤ï¤«¤ê¤ä¤¹¤¤¤·É¸½àŪ¤Ç¤¹¤¬¡¢¥Ä¡¼¥ë¤Ï¾¯¤Ê¤¤¤Ç¤¹¡£\n"
-"\n"
-"¤ª´«¤á¤Ï¡¢¸å¼Ô¤Î·Ú¤¤ÀßÄê¤Î¤Û¤¦¤Ç¤¹¡£\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "¿·¤·¤¤ÀßÄê¡Êisdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "¸Å¤¤ÀßÄê (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN¤ÎÀßÄê"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"¥×¥í¥Ð¥¤¥À¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"¤â¤·¥ê¥¹¥È¤Ë¤Ê¤±¤ì¤Ð¡¢Unlisted¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "¥è¡¼¥í¥Ã¥Ñ¤Î¥×¥í¥È¥³¥ë"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "¥è¡¼¥í¥Ã¥Ñ¥×¥í¥È¥³¥ë (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "À¤³¦¤Î¤½¤Î¾ÍÑ¥×¥í¥È¥³¥ë"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"À¤³¦¤Î¤½¤Î¾ÍÑ¥×¥í¥È¥³¥ë \n"
-" D-Channel ¤Ç¤Ê¤¤(¥ê¡¼¥¹¤µ¤ì¤¿²óÀþ)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "¤É¤Î¥×¥í¥È¥³¥ë¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "¤É¤ó¤Ê¥«¡¼¥É¤ò»È¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "ʬ¤«¤é¤Ê¤¤"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"¤â¤·ISA¥«¡¼¥É¤ò»ý¤Ã¤Æ¤¤¤¿¤é¡¢¼¡¤Î²èÌ̤ÎÃͤ¬Å¬ÀڤǤ·¤ç¤¦¡£\n"
-"\n"
-"¤â¤·PCMCIA¥«¡¼¥É¤ò»ý¤Ã¤Æ¤¤¤¿¤é¡¢¥«¡¼¥É¤Îirq¤Èio¤òÃΤëɬÍפ¬¤¢¤ê¤Þ¤¹¡£\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "̾̂"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "³¤±¤ë"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "¤¢¤Ê¤¿¤ÎISDN¥«¡¼¥É¤Ï¤É¤ì¤Ç¤¹¤«¡©"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN ¥«¡¼¥É¤ò¸¡½Ð¤·¤Þ¤·¤¿¤¬¡¢¥¿¥¤¥×¤¬Ê¬¤«¤ê¤Þ¤»¤ó¡£¼¡¤Î²èÌ̤«¤é PCI ¥«¡¼¥É¤ò"
-"Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI ¥«¡¼¥É¤Ï¸«ÉÕ¤«¤ê¤Þ¤»¤ó¤Ç¤·¤¿¡£¼¡¤Î²èÌ̤«¤éÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "¥â¥Ç¥à¤Ï¤É¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "¥À¥¤¥¢¥ë¥¢¥Ã¥×¥ª¥×¥·¥ç¥ó"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Àܳ̾"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "ÅÅÏÃÈÖ¹æ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "¥í¥°¥¤¥ó ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "¥¹¥¯¥ê¥×¥È¤ò»È¤¦Ç§¾Ú"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "¥¿¡¼¥ß¥Ê¥ë¤«¤é¤Îǧ¾Ú"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "¥É¥á¥¤¥ó̾"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "DNS ¥µ¡¼¥Ð¡Ê¥ª¥×¥·¥ç¥ó¡Ë"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "¥»¥«¥ó¥É DNS ¥µ¡¼¥Ð¡Ê¥ª¥×¥·¥ç¥ó¡Ë"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Àܳ¤òÀڤ뤫¡¢¤¢¤ë¤¤¤ÏºÆÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤òºÆÀßÄê¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤µ¤ì¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ØÀܳ¤¹¤ë¤«Àܳ¤òºÆÀßÄꤷ¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "¸½ºß¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤·¤Æ¤¤¤Þ¤»¤ó¡£"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Àܳ"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "ÀÚÃÇ"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Àܳ¤ÎÀßÄê"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÈÀßÄê"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "¤Ç¤Ï %s Àܳ¤òÀßÄꤷ¤Þ¤·¤ç¤¦¡£"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"¤Ç¤Ï %s Àܳ¤òÀßÄꤷ¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"\n"
-"¡ÖOK¡×¤ò²¡¤·¤Æ»Ï¤á¤Þ¤·¤ç¤¦¡£"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤Æ¤¤¤ë¤Î¤Ç¡¢¥Í¥Ã¥È¥ï¡¼¥¯¤ÏÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-"¤¤¤Þ¤ÎÀßÄê¤ò¤½¤Î¤Þ¤Þ»È¤¦¤Ë¤Ï OK ¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£¥Í¥Ã¥È¥ï¡¼¥¯/¥¤¥ó¥¿¡¼"
-"¥Í¥Ã¥È¤òºÆÀßÄꤹ¤ë¤Ë¤Ï¥­¥ã¥ó¥»¥ë¤ò²¡¤·¤Þ¤¹¡£\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄꥦ¥£¥¶¡¼¥É¤Ø¤è¤¦¤³¤½\n"
-"\n"
-"¤³¤³¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È/¥Í¥Ã¥È¥ï¡¼¥¯Àܳ¤òÀßÄꤹ¤ë¤È¤³¤í¤Ç¤¹¡£\n"
-"¼«Æ°¸¡½Ð¤ò»È¤¤¤¿¤¯¤Ê¤±¤ì¤Ð¡¢¥Á¥§¥Ã¥¯¤ò¤Ï¤º¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "ÀßÄꤹ¤ë¥×¥í¥Õ¥£¡¼¥ë¤ÎÁªÂò"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "¼«Æ°¸¡½Ð¤ò»È¤¦"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "¥Ç¥Ð¥¤¥¹¤Î¸¡½ÐÃæ¤Ç¤¹¡Ä¡Ä"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "¤Õ¤Ä¤¦¤Î¥â¥Ç¥àÀܳ¤òÀßÄê"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "¥Ý¡¼¥È %s ¤Ç¸¡½Ð¤·¤Þ¤·¤¿"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN Àܳ"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s ¤ò¸¡½Ð"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL Àܳ"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ %s ¤Ç¸¡½Ð"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "¥±¡¼¥Ö¥ëÀܳ"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "¥±¡¼¥Ö¥ëÀܳ¤¬¸¡½Ð¤µ¤ì¤Þ¤·¤¿"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN Àܳ"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "¥¤¡¼¥µ¥Í¥Ã¥È¥«¡¼¥É¤¬¸¡½Ð¤µ¤ì¤Þ¤·¤¿"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "ÀßÄꤷ¤¿¤¤Àܳ¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÊýË¡¤òÊ£¿ôÀßÄꤷ¤Þ¤·¤¿¤Í¡£\n"
-"¤É¤ì¤ò»È¤¦¤«Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "¥Ö¡¼¥È»þ¤ËÀܳ¤ò³«»Ï¤·¤Þ¤¹¤«¡©"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤òºÆµ¯Æ°¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¤òºÆµ¯Æ°»þ¤Ë¥¨¥é¡¼È¯À¸: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"¤ª¤á¤Ç¤È¤¦¤´¤¶¤¤¤Þ¤¹¡£¥Í¥Ã¥È¥ï¡¼¥¯¤È¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¬´°Î»¤Ç¤¹¡£\n"
-"\n"
-"ÀßÄê¤ò¤³¤ì¤«¤é¥·¥¹¥Æ¥à¤ËÈ¿±Ç¤µ¤»¤Þ¤¹¡£\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"¤³¤ì¤¬½ª¤ï¤Ã¤¿¤é¡¢X ¥¦¥£¥ó¥É¥¦´Ä¶­¤òºÆµ¯Æ°¤µ¤»¤Æ¡¢¥Û¥¹¥È̾Êѹ¹¤Ëȼ¤¦\n"
-"ÌäÂê¤ò²óÈò¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"ÀßÄêÃæ¤ËÌäÂ꤬µ¯¤­¤Þ¤·¤¿¡£\n"
-"net_monitor ¤« mcc¤ÇÀܳ¤ò¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£Àܳ¤¬¤Ç¤­¤Æ¤¤¤Ê¤±¤ì¤ÐÀßÄê¤ò"
-"ºÆµ¯Æ°¤·¤¿¤Û¤¦¤¬¤¤¤¤¤«¤â¤·¤ì¤Þ¤»¤ó"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"·Ù¹ð¡ª: ¤³¤Î¥Ç¥Ð¥¤¥¹¤Ï¡¢¤¹¤Ç¤Ë¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÍѤËÀßÄꤵ¤ì¤Æ¤¤¤Þ¤¹¡£\n"
-"¤â¤È¤ÎÀßÄê¤ò»Ä¤·¤¿¤±¤ì¤Ð¡¢¤³¤Î¤Þ¤Þ OK ¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"°Ê²¼¤Î¥Õ¥£¡¼¥ë¥É¤òÊѹ¹¤¹¤ë¤È¡¢ÀßÄ꤬ÊѤï¤Ã¤Æ¤·¤Þ¤¤¤Þ¤¹¡£"
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Î IP ¥¢¥É¥ì¥¹¤òÆþÎϤ·¤Æ²¼¤µ¤¤¡£\n"
-"³Æ¡¹¤Î¹àÌܤˤϥɥåȤǶèÀÚ¤é¤ì¤¿½½¿Ê¿ô(Î㡤1.2.3.4)¤¬IP ¥¢¥É¥ì¥¹¤È¤·¤ÆÆþÎϤµ"
-"¤ì¤Þ¤¹¡£"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹ %s ¤ÎÀßÄê"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (¥É¥é¥¤¥Ð %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ¥¢¥É¥ì¥¹:"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "¥Í¥Ã¥È¥Þ¥¹¥¯:"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP ¤Î¼«Æ°ÀßÄê"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ¥¢¥É¥ì¥¹¤Ï 1.2.3.4 ¤Î¤è¤¦¤ËÆþÎϤ·¤Æ²¼¤µ¤¤"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"¥Û¥¹¥È̾¤òÆþÎϤ·¤Æ²¼¤µ¤¤¡£\n"
-"¥Û¥¹¥È̾¤Ï¡Èmybox.mylab.myco.com¡É¤Î¤è¤¦¤Ë¤·¤Æ²¼¤µ¤¤¡£\n"
-"¤â¤·¥²¡¼¥È¥¦¥§¥¤¤¬¤¢¤ì¤Ð¡¤¤½¤Î IP ¥¢¥É¥ì¥¹¤âÆþÎϤ·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ¥µ¡¼¥Ð"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "¥²¡¼¥È¥¦¥§¥¤ (Îã %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "¥²¡¼¥È¥¦¥§¥¤¥Ç¥Ð¥¤¥¹"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "¥×¥í¥­¥·¤ÎÀßÄê"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥«¡¼¥É¤Îid¤òÄÉÀסʥé¥Ã¥×¥È¥Ã¥×¤ÇÊØÍø¡Ë"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy ¤Ï http://... ¤Ç¤¹"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ¤Ï ftp://... ¤Ç¤¹"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ÎÀßÄê"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "º£¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤·¤Þ¤¹¤«¡©"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Àܳ¤ò¥Æ¥¹¥È¤·¤Æ¤¤¤Þ¤¹..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "¥·¥¹¥Æ¥à¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤·¤Þ¤·¤¿¡£"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "¥»¥­¥å¥ê¥Æ¥£¾å¤ÎÍýͳ¤Ç¡¢Àܳ¤òÀÚ¤ê¤Þ¤¹¡£"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ø¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Ê¤¤¤è¤¦¤Ç¤¹¤Í¡£\n"
-"Àܳ¤ÎÀßÄê¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Àܳ¤ÎÀßÄê"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "²¼¤Î¥Õ¥£¡¼¥ë¥É¤òËä¤á¤ë¤«¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "¥«¡¼¥É IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "¥«¡¼¥É mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "¥«¡¼¥É IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "¥«¡¼¥É IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "¥«¡¼¥É IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "¤¢¤Ê¤¿¤ÎÅÅÏÃÈÖ¹æ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "¥×¥í¥Ð¥¤¥À¤Î̾Á° (Îã provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "¥×¥í¥Ð¥¤¥À¤ÎÅÅÏÃÈÖ¹æ"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "¥×¥í¥Ð¥¤¥À¤Î dns 1 (¥ª¥×¥·¥ç¥ó)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "¥×¥í¥Ð¥¤¥À¤Î dns 2 (¥ª¥×¥·¥ç¥ó)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "¹ñ¤ÎÁªÂò"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "¥À¥¤¥¢¥ë¥â¡¼¥É"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Àܳ¤Î®ÅÙ: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Àܳ¤Î¥¿¥¤¥à¥¢¥¦¥È¡ÊÉáË"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "¥¢¥«¥¦¥ó¥È¥í¥°¥¤¥ó¡Ê¥æ¡¼¥¶Ì¾¡Ë"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "¥¢¥«¥¦¥ó¥È¥Ñ¥¹¥ï¡¼¥É"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "¥Þ¥¦¥ó¥È¤Ë¼ºÇÔ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "¤³¤Î¥Þ¥·¥ó¤Ç¤Ï¡¢³ÈÄ¥¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤Ë̤»ØÄê¤Î·ê¤¬¤¢¤ê¤Þ¤¹¤¬¡¢»È¤¨¤Þ¤»¤ó¡£\n"
-"¤É¤¦¤·¤Æ¤â»È¤¤¤¿¤±¤ì¤Ð¡¢¥×¥é¥¤¥Þ¥ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò°ÜÆ°¤·¤Æ¡¢Ì¤»ØÄê¤Î·ê¤ò\n"
-"³ÈÄ¥¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÎÎ٤ˤâ¤Ã¤Æ¤­¤Þ¤·¤ç¤¦¡£"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s ¥Õ¥¡¥¤¥ë¤«¤é¤ÎÉü¸µ¤¬¼ºÇÔ¤·¤Þ¤·¤¿¡§ %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤¬²õ¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "¥Õ¥¡¥¤¥ë %s ¤Ø¤Î½ñ¤­¹þ¤ß¥¨¥é¡¼"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"¥É¥é¥¤¥Ö¤¬¤É¤¦¤â¤Þ¤º¤¤¤³¤È¤Ë¤Ê¤Ã¤Æ¤¤¤ë¤è¤¦¤Ç¤¹¡£\n"
-"¥Ç¡¼¥¿¤ÎÀ°¹çÀ­¥Á¥§¥Ã¥¯¤¬Ä̤ê¤Þ¤»¤ó¡£\n"
-"¤Ä¤Þ¤ê¥Ç¥£¥¹¥¯¤Ø½ñ¤­¹þ¤ß¤ò¤·¤Æ¤â¥Ç¡¼¥¿¤¬¤á¤Á¤ã¤¯¤Á¤ã¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ɬ¿Ü"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "½ÅÍ×"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "¤¢¤ë¤ÈºÇ¹â"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "¤¢¤ë¤È¤¦¤ì¤·¤¤"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "¤¢¤Ã¤Æ¤â¤¤¤¤"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ¶¦ÄÌ Unix °õºþ¥·¥¹¥Æ¥à"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation¡Ê¿·À¤Âå¡Ë"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - ¥é¥¤¥ó¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue¡Ê¥­¥å¡¼¤Ê¤·¤Ç°õºþ¡Ë"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "¥ê¥â¡¼¥ÈCUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "¥ê¥â¡¼¥È lpd¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥×¥ê¥ó¥¿¡ÊTCP/¥½¥±¥Ã¥È¡Ë"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/¥¦¥£¥ó¥É¥¦¥º 95/98/NT¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "NetWare ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹¤ÎURI¤òÆþÎÏ"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "¥¸¥ç¥Ö¤ò¥³¥Þ¥ó¥É¤Ø¥Ñ¥¤¥×"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "̤ÃΤΥâ¥Ç¥ë"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " °Ê²¼¤Î¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¾å \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB ¥×¥ê¥ó¥¿ \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", ¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¾å¤Î¿µ¡Ç½¥Ç¥Ð¥¤¥¹ \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr "USB ¾å¤Î¿µ¡Ç½¥Ç¥Ð¥¤¥¹"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", HP JetDirect¾å¤Î¿µ¡Ç½¥Ç¥Ð¥¤¥¹"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", ¿µ¡Ç½¥Ç¥Ð¥¤¥¹"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr "%s ¤Ø°õºþ½ÐÎÏÃæ"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "LPD ¥µ¡¼¥Ð ¡Ö%s¡×¾å¤Î, ¥×¥ê¥ó¥¿¡Ö%s¡×"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP ¥Û¥¹¥È¡Ö%s¡×, ¥Ý¡¼¥È %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "¥¦¥£¥ó¥É¥¦¥º¥µ¡¼¥Ð ¡Ö%s¡×¾å¤Î, ¶¦Í­¡Ö%s¡×"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "Novell ¥µ¡¼¥Ð ¡Ö%s¡×¾å¤Î, ¥×¥ê¥ó¥¿¡Ö%s¡×"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", ¥³¥Þ¥ó¥É¡Ö%s¡×¤ò»ÈÍÑ"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "À¸¤Î¥×¥ê¥ó¥¿¡Ê¥É¥é¥¤¥Ð¤Ê¤·¡Ë"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s¾å¤Ç)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "¡Ê¤³¤Î¥Þ¥·¥ó¾å¤Ç¡Ë"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS ¥µ¡¼¥Ð¡Ö%s¡×¾å¤Ç"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (¥Ç¥Õ¥©¥ë¥È)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "¥×¥ê¥ó¥¿¤ÎÀܳ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¥×¥ê¥ó¥¿¤Ï¤É¤¦¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"¥ê¥â¡¼¥È CUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿¤Ï¡¢¤³¤³¤Ç¤ÏÀßÄêÉÔÍפǤ¹¡£\n"
-"¥×¥ê¥ó¥¿¤Ï¼«Æ°¸¡½Ð¤µ¤ì¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS ÀßÄê"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "CUPS ¥µ¡¼¥Ð¤ò»ØÄê"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î CUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿¤Ë¥¢¥¯¥»¥¹¤¹¤ë¤Ê¤é¡¢²¿¤â\n"
-"ÀßÄꤹ¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£CUPS ¥µ¡¼¥Ð¤¬¼«Æ°Åª¤Ë¥×¥ê¥ó¥¿¤Î¾ðÊó¤òή¤·¤Æ¤¯¤ì¤Þ"
-"¤¹¡£\n"
-"¥Þ¥·¥ó¤¬Ç§¼±¤·¤Æ¤¤¤ë¥×¥ê¥ó¥¿¤Ï¤¹¤Ù¤Æ¡¢Printerdrake ¤Î¼ç¥¦¥£¥ó¥É¥¦¤Î¡Ö¥ê¥â¡¼"
-"¥È\n"
-"¥×¥ê¥ó¥¿¡×¤Ëµó¤¬¤Ã¤Æ¤¤¤Þ¤¹¡£¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ë CUPS ¥µ¡¼¥Ð¤¬¤Ê¤±¤ì"
-"¤Ð¡¢\n"
-"CUPS ¥µ¡¼¥Ð¤Î IP ¥¢¥É¥ì¥¹¤È¡¢¾ì¹ç¤Ë¤è¤Ã¤Æ¤Ï¥Ý¡¼¥ÈÈÖ¹æ¤ò¼êÆ°¤ÇÆþÎϤ·¤Æ¡¢¥µ¡¼"
-"¥Ð\n"
-"¤«¤é¥×¥ê¥ó¥¿¾ðÊó¤ò¤â¤é¤¦¤«¡¢¤¢¤ë¤¤¤Ï¤³¤³¤ò¶õÇò¤Ë¤·¤Æ¤ª¤­¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Ä̾ï¤Ï¡¢CUPS ¤Ï¼«Æ°Åª¤Ë¥Í¥Ã¥È¥ï¡¼¥¯´Ä¶­¤Ë¤¢¤ï¤»¤ÆÀßÄꤵ¤ì¤Æ¡¢\n"
-"¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¤Î CUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿¤Ë¥¢¥¯¥»¥¹¤Ç¤­¤ë\n"
-"¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£¤Ç¤âÀµ¤·¤¯µ¡Ç½¤·¤Ê¤¤¤Ê¤é¡¢¡Ö¼«Æ°CUPSÀßÄê¡×¤ò\n"
-"¥ª¥Õ¤Ë¤·¤Æ¡¢/etc/cups/cupsd.conf ¤ò¼ê¤Ç½ñ¤­´¹¤¨¤Æ¤ä¤ê¤Þ¤¹¡£\n"
-"½ª¤ï¤Ã¤¿¤é¡¢CUPS ¤òºÆµ¯Æ°¤¹¤ë¤Î¤ò¤ªËº¤ì¤Ê¤¯¡ª\n"
-"¡Ê¥³¥Þ¥ó¥É: ¡Öservice cups restart¡×)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ¥¢¥É¥ì¥¹¤Ï 192.168.1.20 ¤Î¤è¤¦¤ËÆþÎϤ·¤Æ²¼¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "¥Ý¡¼¥ÈÈÖ¹æ¤ÏÀµ¿ô¤Ç¤¹¡ª"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS ¥µ¡¼¥Ð¤ÎIP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "¥Ý¡¼¥È"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "¼«Æ° CUPS ÀßÄê"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "¥Ç¥Ð¥¤¥¹¤Î¸¡½ÐÃæ¤Ç¤¹¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "¥Ý¡¼¥È¤Î¥Æ¥¹¥È"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "¥×¥ê¥ó¥¿ÄɲÃ"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"¥×¥ê¥ó¥¿ÀßÄꥦ¥£¥¶¡¼¥É¤Ø¤¤¤é¤Ã¤·¤ã¡Á¤¤\n"
-"\n"
-"¤³¤Î¥¦¥£¥¶¡¼¥É¤Ç¤Ï¡¢¤³¤Î¥Þ¥·¥ó¤ä¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¾¤Î¥Þ¥·¥ó¤Ç»È¤¦\n"
-"¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤ä¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£\n"
-"\n"
-"¥×¥ê¥ó¥¿ÀßÄê¤ËɬÍפʳƼï¾ðÊó¤òˬ¤Í¤Æ¡¢³Æ¼ï¥×¥ê¥ó¥¿¥É¥é¥¤¥Ð¤ä\n"
-"¤½¤Î¥ª¥×¥·¥ç¥ó¡¢¥×¥ê¥ó¥¿ÀܳÊý¼°¤òÁª¤Ù¤ë¤è¤¦¤Ë¤·¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"¥×¥ê¥ó¥¿ÀßÄꥦ¥£¥¶¡¼¥É¤Ø¤¤¤é¤Ã¤·¤ã¡Á¤¤\n"
-"\n"
-"¤³¤Î¥¦¥£¥¶¡¼¥É¤Ï¡¢Àܳ¤µ¤ì¤¿¥×¥ê¥ó¥¿¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ò¤ª¼êÅÁ¤¤¤·¤Þ¤¹¡£\n"
-"\n"
-"¥×¥ê¥ó¥¿¤ò¥³¥ó¥Ô¥å¡¼¥¿¤Ë¤Ä¤Ê¤¤¤ÇÅŸ»¤òÆþ¤ì¤Æ¤¯¤À¤µ¤¤¡£½àÈ÷¤¬¤Ç¤­¤¿¤é¡Ö¼¡¡×"
-"¤ò\n"
-"¥¯¥ê¥Ã¥¯¤¹¤ë¤«¡¢¤¤¤Þ¤ÏÀßÄꤷ¤¿¤¯¤Ê¤±¤ì¤Ð \"¥­¥ã¥ó¥»¥ë\" ¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£\n"
-"\n"
-"¤Ê¤ª¡¢°ìÉô¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Ï¥×¥ê¥ó¥¿¼«Æ°¸¡½ÐÃæ¤Ë¥¯¥é¥Ã¥·¥å¤·¤Þ¤¹¡£\n"
-"¼«Æ°¸¡½Ð¤Ê¤·¤Ç¥×¥ê¥ó¥¿ÀßÄê¤ò¤¹¤ë¤Ë¤Ï¡¢¡Ö¥×¥ê¥ó¥¿¼«Æ°¸¡½Ð¡×¤ò¥ª¥Õ¤Ë¤·¤Þ¤¹¡£\n"
-"¤Þ¤¿printerdrake ¤¬¼«Æ°Åª¤Ë¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ò¸¡½Ð¤·¤Ê¤±¤ì¤Ð¡¢\n"
-"¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¡×¤ò»È¤Ã¤ÆÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "¥×¥ê¥ó¥¿¼«Æ°¸¡½Ð"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"¤ª¤á¤Ç¤È¤¦¤´¤¶¤¤¤Þ¤¹¡£¥×¥ê¥ó¥¿¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÈÀßÄ꤬´°Î»¤·¤Þ¤·¤¿¡ª\n"
-"\n"
-"¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤Î¡Ö°õºþ¡×¥³¥Þ¥ó¥É¡Ê¤Õ¤Ä¤¦¤Ï¡Ö¥Õ¥¡¥¤¥ë¡×¥á¥Ë¥å¡¼¤Î¡Ë\n"
-"¤«¤é°õºþ¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¥×¥ê¥ó¥¿¤ÎÄɲᢺï½ü¡¢Ì¾¾ÎÊѹ¹¡¢¥Ç¥Õ¥©¥ë¥ÈÀßÄê¡ÊÍÑ»æ¥È¥ì¥¤¡¢°õ»úÉʼÁ¤Ê¤É¡Ë"
-"¤¬\n"
-"¤·¤¿¤±¤ì¤Ð¡¢Mandrake ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼¤Î¡Ö¥Ï¡¼¥É¥¦¥§¥¢¡×¤ÎÃæ¤Î\n"
-"¡Ö¥×¥ê¥ó¥¿¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "¥×¥ê¥ó¥¿¤Î¼«Æ°¸¡½Ð"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake ¤Ï¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤ò¼«Æ°¸¡½Ð¤Ç¤­¤Þ¤¹¤¬¡¢°ìÉô¤Î¥·¥¹¥Æ¥à¤Ç¤Ï\n"
-"¥·¥¹¥Æ¥à¤ò¥Õ¥ê¡¼¥º¤µ¤»¤Æ¡¢¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤ò²õ¤·¤Þ¤¹¡£²¿¤¬µ¯¤­¤Æ¤âÃΤê¤Þ¤»¤ó"
-"¤è¡ª\n"
-"\n"
-"¤Ç¡¢ËÜÅö¤Ë¥×¥ê¥ó¥¿¤Î¼«Æ°¸¡½Ð¤ò¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "¼«Æ°¸¡½Ð¤ò¤¹¤ë"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "¥×¥ê¥ó¥¿¤ò¼êÆ°¤ÇÀßÄê"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s ¤ò¸¡½Ð"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¾å¤Î¥×¥ê¥ó¥¿ \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB ¥×¥ê¥ó¥¿ \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£¼êÆ°¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤Ë¤Ï¡¢¥Ç¥Ð¥¤¥¹Ì¾¤«\n"
-"¥Õ¥¡¥¤¥ë̾¤òÆþÎϥ饤¥ó¤ËÆþ¤ì¤Þ¤¹ (¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¤Ê¤é: /dev/lp0, /dev/lp1,... "
-"¤¬ LPT1:, LPT2:, ..., ¤ËÂбþ¤·¤Æ¡¢1ÈÖÌܤΠUSB ¥×¥ê¥ó¥¿: /dev/usb/lp0, 2ÈÖÌÜ"
-"¤Î USB ¥×¥ê¥ó¥¿: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "¥Ç¥Ð¥¤¥¹¤«¥Õ¥¡¥¤¥ë̾¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡ª\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¥×¥ê¥ó¥¿¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ï¡¢OS ¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ë¤·¤«¤Ç¤­¤Þ¤»¤ó¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¸å¤ËMandrake ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¤Ç¡Ö¥Ï¡¼¥É¥¦¥§¥¢¡×¤ÎÃæ¤Î\n"
-"¡Ö¥×¥ê¥ó¥¿¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¥×¥ê¥ó¥¿¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¤Ï¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ\n"
-"¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¥â¡¼¥É¡×¤ËÊѹ¹¤·¤Æ¤«¤é¡Ö¿·µ¬¥×¥ê¥ó¥¿¤ÎÄɲáפò¥¯¥ê¥Ã¥¯\n"
-"¤·¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"°Ê²¼¤Î¥×¥ê¥ó¥¿¤¬¼«Æ°¸¡½Ð¤µ¤ì¤Þ¤·¤¿¡£¤â¤·¤³¤ì¤¬ÀßÄꤷ¤¿¤¤¤â¤Î¤Ç¤Ê¤±¤ì¤Ð¡¢\n"
-"ÆþÎϹԤˡ¢¥Ç¥Ð¥¤¥¹Ì¾/¥Õ¥¡¥¤¥ë̾¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"°Ê²¼¤Î¥×¥ê¥ó¥¿¤¬¼«Æ°¸¡½Ð¤µ¤ì¤Þ¤·¤¿¡£¤â¤·ÀßÄꤷ¤¿¤¤¤â¤Î¤¬¤³¤³¤Ë¤Ê¤±¤ì¤Ð¡¢\n"
-"ÆþÎϹԤˡ¢¥Ç¥Ð¥¤¥¹Ì¾/¥Õ¥¡¥¤¥ë̾¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"°Ê²¼¤Î¥×¥ê¥ó¥¿¤¬¼«Æ°¸¡½Ð¤µ¤ì¤Þ¤·¤¿¡£¥×¥ê¥ó¥¿¤Ï´°Á´¤Ë¼«Æ°¤ÇÀßÄꤵ¤ì¤Þ¤¹¡£\n"
-"¸¡½Ð¤µ¤ì¤Æ¤¤¤Ê¤«¤Ã¤¿¤ê¡¢¥«¥¹¥¿¥àÀßÄê¤ò¤·¤¿¤±¤ì¤Ð¡Ö¼êÆ°ÀßÄê¡×¤òÍ­¸ú¤Ë¤·¤Æ¤¯¤À"
-"¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"°Ê²¼¤Î¥×¥ê¥ó¥¿¤¬¼«Æ°¸¡½Ð¤µ¤ì¤Þ¤·¤¿¡£ÀßÄꤷ¤¿¤¤¥×¥ê¥ó¥¿¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"¥×¥ê¥ó¥¿¤Ï´°Á´¤Ë¼«Æ°¤ÇÀßÄꤵ¤ì¤Þ¤¹¡£¸¡½Ð¤µ¤ì¤Æ¤¤¤Ê¤«¤Ã¤¿¤ê¡¢¥«¥¹¥¿¥àÀßÄê\n"
-"¤·¤¿¤±¤ì¤Ð¡Ö¼êÆ°ÀßÄê¡×¤òÍ­¸ú¤Ë¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"¥×¥ê¥ó¥¿¤¬Àܳ¤µ¤ì¤Æ¤¤¤ë¥Ý¡¼¥È¤òÁª¤Ö¤«¡¢ÆþÎϹԤ˥ǥХ¤¥¹Ì¾/¥Õ¥¡¥¤¥ë̾¤ò\n"
-"ÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "¥â¥Ç¥à¤Ï¤É¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¤Ê¤é: /dev/lp0, /dev/lp1,... ¤¬ LPT1:, LPT2:, ..., ¤ËÂбþ¡¢1ÈÖ"
-"ÌܤΠUSB ¥×¥ê¥ó¥¿: /dev/usb/lp0, 2ÈÖÌܤΠUSB ¥×¥ê¥ó¥¿: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "¥×¥ê¥ó¥¿¤«¥Ç¥Ð¥¤¥¹¤òÆþÎÏ¡¦ÁªÂò"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "¥Þ¥Ë¥å¥¢¥ëÀßÄê"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥×¥ê¥ó¥¿¤Ï¡¢HPÀ½Â¿µ¡Ç½¥Ç¥Ð¥¤¥¹ (OfficeJet, PSC, PhotoSmart, LaserJet "
-"1100/1200/1220/3200/3300 ¤Î¥¹¥­¥ã¥Ê¤Ä¤­) ¤Ç¤¹¤«?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "HPOJ ¥Ñ¥Ã¥±¡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ëÃæ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "¥Ç¥Ð¥¤¥¹¤ò¥Á¥§¥Ã¥¯¤·¤ÆHPOJ ¤ò¥¤¥ó¥¹¥È¡¼¥ëÃæ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "SANE ¥Ñ¥Ã¥±¡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ëÃæ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "HP ¥Þ¥ë¥Áµ¡Ç½¥Ç¥Ð¥¤¥¹¤Ç¥¹¥­¥ã¥óÃæ"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "¥×¥ê¥ó¥¿¥Ý¡¼¥È¤ò CUPS ÍѤËÄó¶¡Ãæ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "¥×¥ê¥ó¥¿¥Ç¡¼¥¿¥Ù¡¼¥¹¤òÆɤó¤Ç¤¤¤Þ¤¹..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "¥ê¥â¡¼¥Èlpd¥×¥ê¥ó¥¿¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"¥ê¥â¡¼¥È¤Î lpd ¤Î ¥×¥ê¥ó¥¿¤ò»È¤¦¤Ë¤Ï¡¤¥×¥ê¥ó¥¿¥µ¡¼¥Ð¤Î\n"
-"¥Û¥¹¥È̾¤È¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿Ì¾¤¬É¬Íפˤʤê¤Þ¤¹¡£."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "¥ê¥â¡¼¥È¥Û¥¹¥È̾"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿Ì¾"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "¥ê¥â¡¼¥È¥Û¥¹¥È̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿Ì¾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (¥¦¥£¥ó¥É¥¦¥º 9x/NT) ¥×¥ê¥ó¥¿¤Î¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB ¥×¥ê¥ó¥¿¤ò»È¤¦¤Ë¤Ï¡¤SMB ¥Û¥¹¥È̾(Ãí¡ªTCP/IP ¥Û¥¹¥È̾¤È¤ÏÊÌ¡ª)¤È¡¤\n"
-"¿ʬ¥×¥ê¥ó¥È¥µ¡¼¥Ð¤Î IP ¥¢¥É¥ì¥¹¡¤¥¢¥¯¥»¥¹¤·¤¿¤¤¥×¥ê¥ó¥¿¤Î¶¦Í­Ì¾¡¤\n"
-"ŬÀڤʥ桼¥¶Ì¾¡¤¥Ñ¥¹¥ï¡¼¥É¤ª¤è¤Ó¥ï¡¼¥¯¥°¥ë¡¼¥×¤Î¾ðÊó¤¬É¬Íפˤʤê¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB¥µ¡¼¥Ð¥Û¥¹¥È"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB¥µ¡¼¥Ð¤ÎIP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "¥·¥§¥¢Ì¾"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "¥ï¡¼¥¯¥°¥ë¡¼¥×"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¥µ¡¼¥Ð̾¤«¡¢¥µ¡¼¥Ð¤ÎIP¤Ï¤É¤¦¤·¤Æ¤âÍפê¤Þ¤¹¡ª"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba¥·¥§¥¢Ì¾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Netware ¥×¥ê¥ó¥¿¤Î¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Netware ¥×¥ê¥ó¥¿¤ò»È¤¦¤Ë¤Ï¡¤NetWare ¥Û¥¹¥È̾(Ãí¡ªTCP/IP ¥Û¥¹¥È̾¤È¤Ï°ã¤¦¡ª)\n"
-"¤È¡¤¥¢¥¯¥»¥¹¤·¤¿¤¤¥×¥ê¥ó¥¿¤Î¥×¥ê¥ó¥È¥­¥å¡¼Ì¾¡¤Å¬Àڤʥ桼¥¶Ì¾¤ª¤è¤Ó\n"
-"¥Ñ¥¹¥ï¡¼¥É¤¬É¬Íפˤʤê¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "¥×¥ê¥ó¥¿¥µ¡¼¥Ð"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "°õºþ¥­¥å¡¼¤Î̾Á°"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP ¥µ¡¼¥Ð̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP ¥­¥å¡¼Ì¾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/¥½¥±¥Ã¥È¥×¥ê¥ó¥¿¤Î¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"¥½¥±¥Ã¥È¥×¥ê¥ó¥¿¤Ç°õºþ¤¹¤ë¤Ê¤é¡¢¥×¥ê¥ó¥¿¤Î¥Û¥¹¥È̾¤È¡¢¾ì¹ç¤Ë¤è¤Ã¤Æ¤Ï\n"
-"¥Ý¡¼¥ÈÈֹ椬ɬÍפˤʤê¤Þ¤¹¡£HP JetDirect ¥µ¡¼¥Ð¤Ç¤Ï¡¢¥Ý¡¼¥ÈÈÖ¹æ¤Ï\n"
-"Ä̾ï9100¤Ç¤¹¤¬¡¢¤Û¤«¤Î¥µ¡¼¥Ð¤À¤È¤Þ¤Á¤Þ¤Á¤Ç¤¹¡£¥Ï¡¼¥É¥¦¥§¥¢¤Î¥Þ¥Ë¥å¥¢¥ë¤ò\n"
-"¸«¤Þ¤·¤ç¤¦¡£"
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "¥×¥ê¥ó¥¿¥Û¥¹¥È̾"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "¥×¥ê¥ó¥¿¥Û¥¹¥È̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹¤ÎURI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤¹¤ë¤Î¤ËľÀÜ URI ¤ò»ØÄꤹ¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£\n"
-"¤³¤ÎURI¤ÏCUPS»ÅÍͤ«Foomatic»ÅÍͤǻØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤Ê¤ª¡¢¤¹¤Ù¤Æ¤ÎURI¥¿¥¤¥×¤¬Á´¥¹¥×¡¼¥é¤Ç¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤ë¤ï¤±¤¸¤ã¤Ê¤¤¤Ç¤¹¡£"
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Í­¸ú¤ÊURI¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡ª"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"¥×¥ê¥ó¥¿¤Ï¤½¤ì¤¾¤ì̾Á°¤¬É¬ÍפǤ¹¡Ê¤¿¤È¤¨¤Ð¡Öprinter¡×¡£\n"
-"ÀâÌÀ¤ä¾ì½ê¤ÎÍó¤Ï¶õÍó¤Ç¤â¤«¤Þ¤¤¤Þ¤»¤ó¡£\n"
-"¤³¤ì¤Ï¥æ¡¼¥¶¤Ë¤ï¤«¤ê¤ä¤¹¤¯¤¹¤ë¤¿¤á¤Î¤â¤Î¤Ç¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "¥×¥ê¥ó¥¿¤Î̾Á°"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "¥×¥ê¥ó¥¿¤ÎÀâÌÀ"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "¥×¥ê¥ó¥¿¤Î¾ì½ê"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "¥×¥ê¥ó¥¿¥Ç¡¼¥¿¥Ù¡¼¥¹¤ò½àÈ÷Ãæ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "¥×¥ê¥ó¥¿¤Îµ¡¼ï"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake ¤Ï¡¢¥×¥ê¥ó¥¿¤Î¼«Æ°¸¡½Ð¤ÇÆÀ¤é¤ì¤¿µ¡¼ï̾¤È¡¢¥×¥ê¥ó¥¿¤Î\n"
-"¥Ç¡¼¥¿¥Ù¡¼¥¹¤È¤òÈæ³Ó¤·¤ÆºÇŬ¤Ê¤â¤Î¤òÁª¤Ó¤Þ¤·¤¿¡£¤Ç¤â¤³¤ÎÁªÂò¤Ï¤Þ¤Á¤¬¤Ã¤Æ\n"
-"¤¤¤ë¤«¤â¤·¤ì¤Þ¤»¤ó¡£Æä˥ץê¥ó¥¿¤¬¥Ç¡¼¥¿¥Ù¡¼¥¹Æâ¤Ë¤Þ¤Ã¤¿¤¯¤Ê¤¤¾ì¹ç¤Ë¤Ï\n"
-"¤è¤¯¤Þ¤Á¤¬¤¤¤¬Åܤê¤Þ¤¹¡£Printerdrake ¤ÎÁªÂò¤¬Àµ¤·¤¤¤«¤ò³Î¤«¤á¤Æ¡¢\n"
-"Àµ¤·¤±¤ì¤Ð¡Ö¤³¤Î¥â¥Ç¥ë¤ò»È¤¦¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£¤Þ¤Á¤¬¤Ã¤Æ¤¤¤¿¤é\n"
-"¡Ö¼êÆ°¤ÇÁª¤Ö¡×¤òÁª¤ó¤Ç¡¢¼¡²èÌ̤«¤é¼êÆ°¤Ç¥×¥ê¥ó¥¿µ¡¼ï̾¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"Printerdrake ¤Ï°Ê²¼¤Î¥×¥ê¥ó¥¿¤ò¸«¤Ä¤±¤Þ¤·¤¿:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "¤³¤Î¥â¥Ç¥ë¤ò»È¤¦"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "¼êÆ°¤ÇÁª¤Ö"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "¥×¥ê¥ó¥¿¤Îµ¡¼ï¤òÁª¤Ö"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "¤É¤Îµ¡¼ï¤Î¥×¥ê¥ó¥¿¤ò»È¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Printerdrake ¤¬¥×¥ê¥ó¥¿¤Îµ¡¼ï¤òÀµ¤·¤¯¼«Æ°¸¡½Ð¤·¤¿¤«³Î¤«¤á¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¥«¡¼¥½¥ë¤¬¤Þ¤Á¤¬¤Ã¤¿¥â¥Ç¥ë²½¡Ö¥Ê¥Þ¤Î¥×¥ê¥ó¥¿¡ÊRaw Printer)¡×¤ò»Ø¤·¤Æ\n"
-"¤¤¤¿¤é¡¢°ìÍ÷¤«¤éÀµ¤·¤¤µ¡¼ï¤òõ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥×¥ê¥ó¥¿¤¬¤Ê¤±¤ì¤Ð¡¢¸ß´¹À­¤Î¤¢¤ë¥×¥ê¥ó¥¿¡Ê¥×¥ê¥ó¥¿¤Î¥Þ¥Ë¥å¥¢¥ë¤«\n"
-"Îà»÷¥×¥ê¥ó¥¿¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI win¥×¥ê¥ó¥¿¤ÎÀßÄê"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"OKI ¤Î¥ì¡¼¥¶win¥×¥ê¥ó¥¿¤òÀßÄꤷ¤è¤¦¤È¤·¤Æ¤¤¤Þ¤¹¤Í¡£¤³¤Î¥×¥ê¥ó¥¿¤ÏÈó¾ï¤ËÆüì"
-"¤Ê\n"
-"¥×¥í¥È¥³¥ë¤ò»È¤¦¤Î¤Ç¡¢ºÇ½é¤Î¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ê¤¤¤Èµ¡Ç½¤·¤Þ¤»¤ó¡£\n"
-"¤â¤·Ê̤Υݡ¼¥È¤ËÀܳ¤µ¤ì¤Æ¤¤¤¿¤ê¡¢¥×¥ê¥ó¥¿¥µ¡¼¥Ð¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤¿¤ê¤¹¤ë¾ì¹ç¤Ë"
-"¤Ï¡¢\n"
-"¥Æ¥¹¥È¥Ú¡¼¥¸°õºþ¤ÎÁ°¤Ë¡¢ºÇ½é¤Î¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤®¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¤µ¤â¤Ê¤¤¤È»È¤¨¤Þ¤»¤ó¡£Àܳ¼ïÎà¤ÎÀßÄê¤Ï̵»ë¤µ¤ì¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark¥¤¥ó¥¯¥¸¥§¥Ã¥È¤ÎÀßÄê"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark¤¬Ä󶡤¹¤ë¥¤¥ó¥¯¥¸¥§¥Ã¥È¥×¥ê¥ó¥¿¥É¥é¥¤¥Ð¤Ï¡¢¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤·¤«\n"
-"¥µ¥Ý¡¼¥È¤·¤Þ¤»¤ó¡£¥ê¥â¡¼¥È¥Þ¥·¥ó¤ä¥×¥ê¥ó¥¿¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿¤Ï»È¤¨¤Þ¤»¤ó¡£\n"
-"¥×¥ê¥ó¥¿¤ò¥í¡¼¥«¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤°¤«Àܳ¤µ¤ì¤Æ¤¤¤ë¥Þ¥·¥ó¤ÇÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Lexmark ¥¤¥ó¥¯¥¸¥§¥Ã¥È¤È¤³¤ÎÀßÄê¤Ç°õºþ¤¹¤ë¤Ë¤Ï¡¢Lexmark(http://www.lexmark."
-"com/) ¤ÎÄ󶡤¹¤ë¥¤¥ó¥¯¥¸¥§¥Ã¥È¥×¥ê¥ó¥¿¥É¥é¥¤¥Ð¤¬É¬ÍפǤ¹¡£¥¢¥á¥ê¥«¥µ¥¤¥È¤Ë"
-"¹Ô¤Ã¤Æ¡¢¡Ö¥É¥é¥¤¥Ð¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£¤½¤ì¤«¤é¼«Ê¬¤Îµ¡¼ï¤òÁª¤ó¤Ç¡¢OS¤ÎÍó"
-"¤Ç\"Linux\" ¤òÁª¤Ó¤Þ¤¹¡£¥É¥é¥¤¥Ð¤Ï RPM ¥Ñ¥Ã¥±¡¼¥¸¤«¡¢¥°¥é¥Õ¥£¥Ã¥¯¥¤¥ó¥¹¥È¡¼¥ë"
-"ÍѤΥ·¥§¥ë¥¹¥¯¥ê¥×¥È¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£¤³¤ÎÀßÄê¤Ï¥°¥é¥Õ¥£¥Ã¥¯¥Õ¥í¥ó¥È¥¨¥ó¥É¤ò»È"
-"¤ï¤Ê¤¯¤Æ¤â¤Ç¤­¤Þ¤¹¡£¥é¥¤¥»¥ó¥¹Æ±°Õ¤Î¤¢¤È¤Ç¤¹¤°¤Ë¥­¥ã¥ó¥»¥ë¤·¤Æ¤¯¤À¤µ¤¤¡£¤½¤ì"
-"¤«¤é°õºþ¥Ø¥Ã¥É¤Î¥¢¥é¥¤¥ó¥á¥ó¥È¥Ú¡¼¥¸¤ò\"lexmarkmaintain\" ¤Ç°õºþ¤·¤Æ¡¢¤³¤Î¥×"
-"¥í¥°¥é¥à¤Ç¥Ø¥Ã¥É¤Î¥¢¥é¥¤¥ó¥á¥ó¥È¤òÄ´À°¤·¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"¥×¥ê¥ó¥¿¤Î¥Ç¥Õ¥©¥ë¥ÈÀßÄê\n"
-"\n"
-"¥Ú¡¼¥¸¤ÎÂ礭¤µ¤È¥¤¥ó¥¯¤Î¼ïÎà¡Ê³ºÅö¤¹¤ë¾ì¹ç¤Î¤ß¡Ë¤¬Àµ¤·¤¯ÀßÄꤵ¤ì¤Æ¤¤¤ë¤«¤ò³Î"
-"ǧ¤·¤Þ¤·¤ç¤¦¡£¤Ê¤ª¡¢Ä¶¹âÉʼÁ°õºþ¤Ï¤¹¤´¤¯»þ´Ö¤¬¤«¤«¤ë¤³¤È¤¬¤¢¤ê¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "¥ª¥×¥·¥ç¥ó %s ¤ÏÀ°¿ô¤Ç¤¹¡ª"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "¥ª¥×¥·¥ç¥ó %s ¤Ï¿ô»ú¤Ç¤¹¡ª"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "¥ª¥×¥·¥ç¥ó %s Èϰϳ°¤Ç¤¹!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"¤³¤Î¥×¥ê¥ó¥¿ (\"%s\") ¤ò\n"
-"¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"°õºþ¤·¤¿¤¤¥Æ¥¹¥È¥Ú¡¼¥¸¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-"Ãí¡§¼Ì¿¿¥Æ¥¹¥È¥Ú¡¼¥¸¤Ï¡¢°õºþ¤Ë¤«¤Ê¤ê»þ´Ö¤¬¤«¤«¤ë¤³¤È¤¬¤¢¤ê¤Þ¤¹¤·¡¢¥á¥â¥ê¤Î¾¯"
-"¤Ê¤¤¥ì¡¼¥¶¥×¥ê¥ó¥¿¤Ç¤Ï½ÐÎϤǤ­¤Ê¤¤¤³¤È¤â¤¢¤ê¤Þ¤¹¡£Â¿¤¯¤Î¾ì¹ç¤Ïɸ½à¥Ú¡¼¥¸¤¬°õ"
-"ºþ¤Ç¤­¤ì¤ÐÂç¾æÉפǤ¹¡£"
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸¤Ê¤·"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "°õºþ"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "ɸ½à¥Æ¥¹¥È¥Ú¡¼¥¸"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Ê̤Υƥ¹¥È¥Ú¡¼¥¸ (¥ì¥¿¡¼)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Ê̤Υƥ¹¥È¥Ú¡¼¥¸ (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "¼Ì¿¿¥Æ¥¹¥È¥Ú¡¼¥¸"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸¤ò°õºþ¤·¤Ê¤¤"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸°õºþÃæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"¥Æ¥¹¥È¥Ú¡¼¥¸¤ò¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó¤ËÁ÷¤ê¤Þ¤·¤¿¡£\n"
-"¥×¥ê¥ó¥¿¤¬Æ°¤­½Ð¤¹¤Þ¤Ç¡¢¤Á¤ç¤Ã¤È»þ´Ö¤¬¤«¤«¤ê¤Þ¤¹¡£\n"
-"°õºþ¤Î¥¹¥Æ¡¼¥¿¥¹¡§\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"¥Æ¥¹¥È¥Ú¡¼¥¸¤ò¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó¤ËÁ÷¤ê¤Þ¤·¤¿¡£\n"
-"¥×¥ê¥ó¥¿¤¬Æ°¤­½Ð¤¹¤Þ¤Ç¡¢¤Á¤ç¤Ã¤È»þ´Ö¤¬¤«¤«¤ê¤Þ¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "¤¦¤Þ¤¯Æ°¤­¤Þ¤·¤¿¤«¡©"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "À¸¤Î¥×¥ê¥ó¥¿"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"¥³¥Þ¥ó¥É¥é¥¤¥ó¡Ê¥¿¡¼¥ß¥Ê¥ë¥¦¥£¥ó¥É¥¦¡Ë¤«¤é¥Õ¥¡¥¤¥ë¤ò°õºþ¤¹¤ë¤Ë¤Ï¡¢\n"
-"¥³¥Þ¥ó¥É¡Ö%s <file>¡×¤«¡¢¥°¥é¥Õ¥£¥Ã¥¯°õºþ¥Ä¡¼¥ë: ¡Öxpp <file>¡×¤«\n"
-"¡Ökprinter <file>¡×¤ò»È¤¤¤Þ¤¹¡£¥°¥é¥Õ¥£¥Ã¥¯¥Ä¡¼¥ë¤Ï¡¢\n"
-"¥×¥ê¥ó¥¿ÁªÂò¤È¥ª¥×¥·¥ç¥óÀßÄê¤ò´Êñ¤Ë¤·¤Æ¤¯¤ì¤Þ¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"¤³¤¦¤·¤¿¥³¥Þ¥ó¥É¤Ï¡¢Â¿¤¯¤Î¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤Î°õºþ¥À¥¤¥¢¥í¥°¤ÎÃæ¤Î\n"
-"¡Ö°õºþ¥³¥Þ¥ó¥É¡×¥Õ¥£¡¼¥ë¥É¤Ç¤â»È¤¨¤Þ¤¹¤¬¡¢¤½¤Î¾ì¹ç¤Ï¥Õ¥¡¥¤¥ë̾¤ÏÍפê¤Þ¤»"
-"¤ó¡£\n"
-"°õºþ¤¹¤ë¥Õ¥¡¥¤¥ë¤Ï¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤«¤é¤¯¤ë¤«¤é¤Ç¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"¡Ö%s¡×¥³¥Þ¥ó¥É¤Ï¤Þ¤¿¡¢°õºþ¥¸¥ç¥Ö¤´¤È¤Ë¥ª¥×¥·¥ç¥óÀßÄê¤òÊѤ¨¤µ¤»¤Æ¤¯¤ì¤Þ¤¹¡£\n"
-"¥³¥Þ¥ó¥É¥é¥¤¥ó¤Ë´õ˾¤ÎÀßÄê¤òÄɲ乤ë¤À¤±¤Ç¤¹¡£\n"
-"¤¿¤È¤¨¤Ð¡Ö%s <file>¡×¤È¤¤¤¦¶ñ¹ç¤Ç¤¹¡£ "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"¤¤¤Þ¤Î¥×¥ê¥ó¥¿¤Ç»È¤¨¤ë¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò¸«¤ë¤Ë¤Ï¡¢²¼¤Î°ìÍ÷¤òÆɤफ¡¢\n"
-"¤¢¤ë¤¤¤Ï¡Ö¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò°õºþ¡×¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"¤¤¤Þ¤Î¥×¥ê¥ó¥¿¤Ç»È¤¨¤ë°õºþ¥ª¥×¥·¥ç¥ó°ìÍ÷¤Ï°Ê²¼¤ÎÄ̤ê¤Ç¤¹:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"¥³¥Þ¥ó¥É¥é¥¤¥ó¡Ê¥¿¡¼¥ß¥Ê¥ë¥¦¥£¥ó¥É¥¦¡Ë¤«¤é¥Õ¥¡¥¤¥ë¤ò°õºþ¤¹¤ë¤Ë¤Ï¡¢\n"
-"¥³¥Þ¥ó¥É¡Ö%s <file>¡×¤ò»È¤¤¤Þ¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"¤³¤¦¤·¤¿¥³¥Þ¥ó¥É¤Ï¡¢Â¿¤¯¤Î¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤Î°õºþ¥À¥¤¥¢¥í¥°¤ÎÃæ¤Î\n"
-"¡Ö°õºþ¥³¥Þ¥ó¥É¡×¥Õ¥£¡¼¥ë¥É¤Ç¤â»È¤¨¤Þ¤¹¤¬¡¢¤½¤Î¾ì¹ç¤Ï¥Õ¥¡¥¤¥ë̾¤ÏÍפê¤Þ¤»"
-"¤ó¡£\n"
-"°õºþ¤¹¤ë¥Õ¥¡¥¤¥ë¤Ï¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤«¤é¤¯¤ë¤«¤é¤Ç¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"¤¤¤Þ¤Î¥×¥ê¥ó¥¿¤Ç»È¤¨¤ë¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò¸«¤ë¤Ë¤Ï¡¢¡Ö¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò°õºþ¡×¥Ü¥¿"
-"¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"¥³¥Þ¥ó¥É¥é¥¤¥ó¡Ê¥¿¡¼¥ß¥Ê¥ë¥¦¥£¥ó¥É¥¦¡Ë¤«¤é¥Õ¥¡¥¤¥ë¤ò°õºþ¤¹¤ë¤Ë¤Ï¡¢\n"
-"¥³¥Þ¥ó¥É¡Ö%s <file>¡×¤Þ¤¿¤Ï¡Ö%s <file>¡×¤ò»È¤¤¤Þ¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"¤Þ¤¿¥ª¥×¥·¥ç¥óÀßÄê¤ä°õºþ¥¸¥ç¥Ö¤Î½èÍý¤Ë¤Ï¥°¥é¥Õ¥£¥Ã¥¯¤Î¡Öxpdq¡×¤â»È¤¨¤Þ¤¹¡£\n"
-"¥Ç¥¹¥¯¥È¥Ã¥×´Ä¶­¤¬ KDE ¤Ê¤é¡¢¡Ö¥Ñ¥Ë¥Ã¥¯¥Ü¥¿¥ó¡×¤È¤¤¤¦¥¢¥¤¥³¥ó¤¬¥Ç¥¹¥¯¥È¥Ã¥×"
-"¤Ë\n"
-"¤¢¤ë¤Ç¤·¤ç¤¦¡£¤³¤ì¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢°õºþ¥¸¥ç¥Ö¤¬Á´Éô¤¹¤°¤Ë»ß¤Þ¤ê¤Þ¤¹¡£\n"
-"¤³¤ì¤Ï¤¿¤È¤¨¤Ð»æµÍ¤Þ¤ê¤Î¤È¤­¤ËÊØÍø¤Ç¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"¡Ö%s¡×¤È¡Ö%s¡×¥³¥Þ¥ó¥É¤Ï¤Þ¤¿¡¢°õºþ¥¸¥ç¥Ö¤´¤È¤Ë¥ª¥×¥·¥ç¥óÀßÄê¤ò\n"
-"ÊѤ¨¤µ¤»¤Æ¤¯¤ì¤Þ¤¹¡£¥³¥Þ¥ó¥É¥é¥¤¥ó¤Ë´õ˾¤ÎÀßÄê¤òÄɲ乤ë¤À¤±¤Ç¤¹¡£\n"
-"¤¿¤È¤¨¤Ð¡Ö%s <file>¡×¤È¤¤¤¦¶ñ¹ç¤Ç¤¹¡£\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "ÊĤ¸¤ë"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "°Ê²¼¤Ç°õºþÃæ/¥¹¥­¥ã¥ó¡§ \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "°Ê²¼¤Î¥×¥ê¥ó¥¿¤Ç°õºþÃ桧 \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "¥×¥ê¥ó¥¿¥ª¥×¥·¥ç¥ó°ìÍ÷"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"HP ¿µ¡Ç½¥Ç¥Ð¥¤¥¹¤ò¼«Æ°ÀßÄꤷ¤Æ¡¢¥¹¥­¥ã¥Ê¤â»È¤¨¤ë¤è¤¦¤Ë¤·¤Þ¤·¤¿¡£¤³¤ì¤Ç¥³¥Þ¥ó"
-"¥É¥é¥¤¥ó¤«¤é\"scanimage\"¤òÆþÎϤ¹¤ë¤« (Ê£¿ô¤Î¥¹¥­¥ã¥Ê¤¬¤¢¤ë¾ì¹ç¤Ï\"scanimage "
-"-d hp:%s\" ¤Ç¥¹¥­¥ã¥Ê¤ò»ØÄê)¡¢¥°¥é¥Õ¥£¥Ã¥¯¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤Î\"xscanimage\" "
-"¤« \"xsane\"¤ò»È¤Ã¤Æ¥¹¥­¥ã¥ó¤¬¤Ç¤­¤Þ¤¹¡£GIMP¤ò»È¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢\"¥Õ¥¡¥¤¥ë\"/"
-"\"Æɤ߹þ¤ß\"¥á¥Ë¥å¡¼¤ÇŬÀÚ¤ÊÉôʬ¤òÁª¤ó¤Ç¤â²Äǽ¤Ç¤¹¡£¾Ü¤·¤¯¤Ï¡¢¥³¥Þ¥ó¥É¥é¥¤¥ó"
-"¤Ç \"man scanimage\" ¤È \"man sane-hp\" ¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¤³¤Î¥Ç¥Ð¥¤¥¹¤Ç¤Ï\"scannerdrake\" ¤Ï»È¤ï¤Ê¤¤¤Ç¤¯¤À¤µ¤¤!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"HP ¿µ¡Ç½¥Ç¥Ð¥¤¥¹¤ò¼«Æ°ÀßÄꤷ¤Æ¡¢¥¹¥­¥ã¥Ê¤â»È¤¨¤ë¤è¤¦¤Ë¤·¤Þ¤·¤¿¡£¤³¤ì¤Ç¥³¥Þ¥ó"
-"¥É¥é¥¤¥ó¤«¤é\"ptal-hp %s scan ...\"¤Ç¥¹¥­¥ã¥ó¤¬¤Ç¤­¤Þ¤¹¡£¥°¥é¥Õ¥£¥Ã¥¯¥¤¥ó¥¿¡¼"
-"¥Õ¥§¡¼¥¹¤äGIMP¤«¤é¤Î¥¹¥­¥ã¥ó¤Ï¡¢¤³¤Î¥Ç¥Ð¥¤¥¹¤Ç¤Ï¤Þ¤À¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤Þ¤»¤ó¡£"
-"¾Ü¤·¤¯¤Ï\"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" ¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£HP "
-"LaserJet 1100 ¤« 1200 ¤Î¾ì¹ç¤Ë¤Ï¡¢¥¹¥­¥ã¥Ê¥ª¥×¥·¥ç¥ó¤¬¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤Ê¤¤"
-"¤È¥À¥á¤Ç¤¹¡£\n"
-"\n"
-"¤³¤Î¥Ç¥Ð¥¤¥¹¤Ç¤Ï\"scannerdrake\" ¤Ï»È¤ï¤Ê¤¤¤Ç¤¯¤À¤µ¤¤!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "¥×¥ê¥ó¥¿¤Î¾ðÊó¤òÆɤó¤Ç¤¤¤Þ¤¹..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò°ÜÆ°"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"¥¹¥×¡¼¥é %s ¤«¤é¤¤¤Þ¤Î¥¹¥×¡¼¥é %s ¤Ø¡¢¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò¥³¥Ô¡¼¤Ç¤­¤Þ¤¹¡£ÀßÄê"
-"¥Ç¡¼¥¿¤¹¤Ù¤Æ¡Ê¥×¥ê¥ó¥¿Ì¾¡¢ÀâÌÀ¡¢¾ì½ê¡¢Àܳ¼ïÎà¡¢¥Ç¥Õ¥©¥ë¥È¤Î¥ª¥×¥·¥ç¥óÀßÄê¡Ë"
-"¤Ï¤½¤Á¤é¤Ë¼è¤é¤ì¤Þ¤¹¤¬¡¢¥¸¥ç¥Ö¤Ï°ÜÆ°¤·¤Þ¤»¤ó¡£°Ê²¼¤ÎÍýͳ¤Ç¡¢°ÜÆ°¤Ç¤­¤Ê¤¤"
-"¥­¥å¡¼¤â¤¢¤ê¤Þ¤¹¡§\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ¤Ï Novell ¥µ¡¼¥Ð¤Î¥×¥ê¥ó¥¿¤ä¡¢¼«Í³·Á¼°¤Î¥³¥Þ¥ó¥É¤Ë¥Ç¡¼¥¿¤òÁ÷¤ë¥×¥ê¥ó¥¿¤Ï"
-"¥µ¥Ý¡¼¥È¤·¤Þ¤»¤ó¡£\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ¤Ï¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤È¥ê¥â¡¼¥È¤Î LPD ¥×¥ê¥ó¥¿¡¢¥½¥±¥Ã¥È/TCP ¥×¥ê¥ó¥¿¤·¤«¥µ"
-"¥Ý¡¼¥È¤·¤Þ¤»¤ó¡£\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ¤È LPRng ¤ÏIPP ¥×¥ê¥ó¥¿¤ò¥µ¥Ý¡¼¥È¤·¤Þ¤»¤ó¡£\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"¤µ¤é¤Ë¤³¤Î¥×¥í¥°¥é¥à¤ä\"foomatic-configure\" ¤Çºî¤Ã¤Æ¤¤¤Ê¤¤¥­¥å¡¼¤Ï°ÜÆ°¤Ç¤­¤Þ"
-"¤»¤ó¡£"
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"¤Þ¤¿¥á¡¼¥«¡¼Ä󶡤ΠPPD ¥Õ¥¡¥¤¥ë¤ä¥Í¥¤¥Æ¥£¥Ö¤Î CUPS ¥É¥é¥¤¥Ð¤ÇÀßÄꤵ¤ì¤¿¥×¥ê¥ó"
-"¥¿¤Ï°ÜÆ°¤Ç¤­¤Þ¤»¤ó¡£"
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"°ÜÆ°¤·¤¿¤¤¥×¥ê¥ó¥¿¤òÁª¤ó¤Ç \"T°ÜÆ°\"¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "¥×¥ê¥ó¥¿¤ò°ÜÆ°¤·¤Ê¤¤"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "°ÜÆ°"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" ¤È¤¤¤¦¥×¥ê¥ó¥¿¤Ï¤¹¤Ç¤Ë %s ¤Î²¼¤Ë¸ºß¤·¤Þ¤¹¡£\n"
-"¾å½ñ¤­¤¹¤ë¤Ë¤Ï \"°ÜÆ°\" ¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"¿·¤·¤¤Ì¾Á°¤ò¥¿¥¤¥×¤¹¤ë¤«¡¢¤³¤Î¥×¥ê¥ó¥¿¤ò¤È¤Ð¤¹¤³¤È¤â¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "¥×¥ê¥ó¥¿Ì¾¤Ï¡¢Ê¸»ú¤È¿ô»ú¤È¥¢¥ó¥À¡¼¥¹¥³¥¢ (_)¤·¤«»È¤¨¤Þ¤»¤ó"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"¥×¥ê¥ó¥¿ \"%s\" ¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹¡£\n"
-"¤¤¤Þ¤ÎÀßÄê¤ò¾å½ñ¤­¤·¤Æ¤·¤Þ¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "¿·¤·¤¤¥×¥ê¥ó¥¿¤Î̾Á°"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s °ÜÆ°Ãæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Á°¤Î¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿ (\"%s\")¤ò°ÜÆ°¤·¤Þ¤·¤¿¡£¿·¤·¤¤°õºþ¥·¥¹¥Æ¥à%s¤Ç¤â¤³¤ì¤ò"
-"¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "¥×¥ê¥ó¥¿¥Ç¡¼¥¿¹¹¿·Ãæ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ÎÀßÄê"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯µ¯Æ°Ãæ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "º£¤¹¤°¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤ò¤¹¤ë"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯µ¡Ç½¤¬ÀßÄꤵ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£¤³¤ì¤Ï¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥¯¥»¥¹¤Î²ÔƯ¤¬É¬¿Ü¤Ç¤¹"
-"¤¬¡¢¤¢¤Ê¤¿¤Î¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤Ï¤¹¤ó¤Ç¤¤¤Þ¤»¤ó¡£¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤Ê¤·¤Ç¿Ê¤à¤È¡¢"
-"¤¤¤ÞÀßÄêÃæ¤Î¥×¥ê¥ó¥¿¤Ï»È¤¨¤Þ¤»¤ó¡£¤µ¤Æ¤É¤¦¿Ê¤á¤Þ¤·¤ç¤¦¤«¡©"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ÎÀßÄê¤ò¤È¤Ð¤·¤ÆÀè¤Ë¿Ê¤à"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ëÃæ¤Ë¤ä¤Ã¤¿¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄ꤬µ¯Æ°¤Ç¤­¤Þ¤»¤ó¡£µ¯Æ°»þ¤Ë¥Í¥Ã¥È¥ï¡¼¥¯"
-"¤¬Í­¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤ë¤«Ä´¤Ù¤Æ¡¢É¬ÍפʤéMandrake¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¤Î¡Ö¥Í¥Ã¥È¥ï¡¼"
-"¥¯&¥¤¥ó¥¿¡¼¥Í¥Ã¥È/Àܳ¡×¤ÎÉôʬ¤ÇÀßÄê¤ò¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤¡£¤½¤ì¤¬½»¤ó¤Ç¤«¤é¡¢Æ±"
-"¤¸¤¯Mandrake¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¤Î¡Ö¥Ï¡¼¥É¥¦¥§¥¢/¥×¥ê¥ó¥¿¡×¤ÎÉôʬ¤Ç¥×¥ê¥ó¥¿¤ÎÀß"
-"Äê¤ò¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥¯¥»¥¹¤¬Íî¤Á¤Æ¤¤¤Æ¡¢µ¯Æ°¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿¡£¥Ï¡¼¥É¥¦¥§¥¢¤äÀßÄê¤ò"
-"¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£¤½¤ì¤«¤é¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ÎÀßÄê¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "¥×¥ê¥ó¥¿¥·¥¹¥Æ¥àºÆµ¯Æ°Ãæ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "¹â¤¤"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "¿À·Ð¼Á¤Ê¤Û¤É¹â¿å½à"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "°õºþ¥·¥¹¥Æ¥à¤ò¥»¥­¥å¥ê¥Æ¥£¿å½à %s ¤Ç¥¤¥ó¥¹¥È¡¼¥ëÃæ"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"¤³¤ì¤«¤é¡¢°õºþ¥·¥¹¥Æ¥à %s ¤ò¥»¥­¥å¥ê¥Æ¥£¿å½à %s ¤Î¥Þ¥·¥ó¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ"
-"¤¹¡£\n"
-"\n"
-"¤³¤Î°õºþ¥·¥¹¥Æ¥à¤Ï¡¢¥Ç¡¼¥â¥ó¡Ê¥Ð¥Ã¥¯¥°¥é¥¦¥ó¥É¤Î¥×¥í¥»¥¹¡Ë¤ò¼Â¹Ô¤·¤Þ¤¹¡£¤³¤ì"
-"¤Ï°õºþ¥¸¥ç¥Ö¤òÂԤäơ¢¤½¤ì¤¬¤­¤¿¤é½èÍý¤·¤Þ¤¹¡£¤³¤Î¥Ç¡¼¥â¥ó¤Ï¥Í¥Ã¥È¥ï¡¼¥¯·Ðͳ"
-"¤Ç¡¢¥ê¥â¡¼¥È¥Þ¥·¥ó¤«¤é¤â¥¢¥¯¥»¥¹¤Ç¤­¤ë¤Î¤Ç¡¢¹¶·â¤µ¤ì¤ë²ÄǽÀ­¤¬¤¢¤ê¤Þ¤¹¡£¤Ç¤¹"
-"¤«¤é¤³¤Î¥»¥­¥å¥ê¥Æ¥£¿å½à¤Ç¤Ï¡¢¥Ç¥Õ¥©¥ë¥È¤Çµ¯Æ°¤¹¤ë¥Ç¡¼¥â¥ó¤Ï¤´¤¯¾¯¿ô¤Ç¤¹¡£\n"
-"\n"
-"¤³¤Î¥Þ¥·¥ó¤Ç°õºþ¤ÎÀßÄê¤òËÜÅö¤Ë¤ä¤Ã¤Æ¤¤¤¤¤Ç¤¹¤Í¡©"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "µ¯Æ°»þ¤Ë°õºþ¥·¥¹¥Æ¥à¤ò¥¹¥¿¡¼¥È"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"°õºþ¥·¥¹¥Æ¥à (%s) ¤Ï¡¢¥Þ¥·¥óµ¯Æ°»þ¤Ë¼«Æ°¥¹¥¿¡¼¥È¤·¤Þ¤»¤ó¡£\n"
-"\n"
-"¥»¥­¥å¥ê¥Æ¥£¿å½à¤ò¾å¤²¤¿¤¿¤á¤Ë¡¢¼«Æ°¥¹¥¿¡¼¥È¤¬Ìµ¸ú¤Ë¤Ê¤Ã¤¿¤Î¤«¤â¤·¤ì¤Þ¤»¤ó¡£"
-"°õºþ¥·¥¹¥Æ¥à¤Ï¡¢¹¶·â¤µ¤ì¤ë²ÄǽÀ­¤¬¤¢¤ë¤«¤é¤Ç¤¹¡£\n"
-"\n"
-"°õºþ¥·¥¹¥Æ¥à¤Î¼«Æ°¥¹¥¿¡¼¥È¤ò¤â¤¦°ìÅÙÍ­¸ú¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¥½¥Õ¥È¤ò¥Á¥§¥Ã¥¯Ãæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng ºï½üÃæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD ºï½üÃæ¡Ä¡Ä"
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "¥×¥ê¥ó¥¿¤Î¥¹¥×¡¼¥é¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¤É¤Î°õºþ¥·¥¹¥Æ¥à¡Ê¥¹¥×¡¼¥é¡Ë¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "¥×¥ê¥ó¥¿ \"%s\" ¤ÎÀßÄêÃæ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Foomatic ¤Î¥¤¥ó¥¹¥È¡¼¥ëÃæ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "¥×¥ê¥ó¥¿¥ª¥×¥·¥ç¥ó"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake½àÈ÷Ãæ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤ÎÀßÄêÃæ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "°õºþ¤ÎÀßÄê¤ò¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "°õºþ¥·¥¹¥Æ¥à:"
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"°Ê²¼¤Î¥×¥ê¥ó¥¿¤¬ÀßÄꤵ¤ì¤Æ¤¤¤Þ¤¹¡£ÀßÄê¤òÊѹ¹¤·¤¿¤¤¥×¥ê¥ó¥¿¤ò¥À¥Ö¥ë¥¯¥ê¥Ã¥¯¤·"
-"¤Æ¤¯¤À¤µ¤¤¡£¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤Ë¤·¤¿¤ê¡¢¤½¤Î¾ðÊó¤ò¸«¤¿¤ê¡¢¥ê¥â¡¼¥È¤ÎCUPS ¥µ¡¼"
-"¥Ð¾å¤Î¥×¥ê¥ó¥¿¤ò Star Office/OpenOffice.org¤Ç»È¤¨¤ë¤è¤¦¤Ë¤¹¤ë¾ì¹ç¤â¤½¤¦¤Ç¤¹¡£"
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"°Ê²¼¤Î¥×¥ê¥ó¥¿¤¬ÀßÄꤵ¤ì¤Æ¤¤¤Þ¤¹¡£Êѹ¹¡¢¥Ç¥Õ¥©¥ë¥È²½¡¢¾ðÊó¤Î»²¾È¤Ë¤Ï¡¢\n"
-"¤½¤Î¥×¥ê¥ó¥¿¤ò¥À¥Ö¥ë¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£"
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "¥×¥ê¥ó¥¿°ìÍ÷¹¹¿·¡Ê¥ê¥â¡¼¥È CUPS¥×¥ê¥ó¥¿¤ò¤¹¤Ù¤Æɽ¼¨)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "°õºþ¥·¥¹¥Æ¥à¤òÊѹ¹"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "¥Î¡¼¥Þ¥ë¥â¡¼¥É"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Ê̤Υץê¥ó¥¿¤òÀßÄꤷ¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "¥×¥ê¥ó¥¿ÀßÄê¤ÎÊѹ¹"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"¥×¥ê¥ó¥¿ %s\n"
-"¤³¤Î¥×¥ê¥ó¥¿¤Î²¿¤òÊѹ¹¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "¤ä¤ì¡ª"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "¥×¥ê¥ó¥¿Àܳ¤Î¼ïÎà"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "¥×¥ê¥ó¥¿¤Î̾Á°¡¢ÀâÌÀ¡¢¾ì½ê"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "¥×¥ê¥ó¥¿¤Î¥á¡¼¥«¡¼¡¢µ¡¼ï¡¢¥É¥é¥¤¥Ð"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "¥×¥ê¥ó¥¿¤Î¥á¡¼¥«¡¼¡¢µ¡¼ï"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "¤³¤Î¥×¥ê¥ó¥¿¤ò¥Ç¥Õ¥©¥ë¥È¤Ë¤¹¤ë"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "¤³¤Î¥×¥ê¥ó¥¿¤ò Star Office/OpenOffice.org ¤ËÄɲÃ"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "¤³¤Î¥×¥ê¥ó¥¿¤ò Star Office/OpenOffice.org ¤«¤éºï½ü"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "¥Æ¥¹¥È¥Ú¡¼¥¸°õºþ"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "¤³¤Î¥×¥ê¥ó¥¿¤Î»È¤¤Êý¤òÄ´¤Ù¤ë"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "¥×¥ê¥ó¥¿ºï½ü"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "¸Å¤¤¥×¥ê¥ó¥¿ \"%s\" ¤òºï½üÃæ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "¥×¥ê¥ó¥¿ %s ¤¬¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤Ë¤Ê¤ê¤Þ¤·¤¿¡£"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "¥×¥ê¥ó¥¿¤ò Star Office/OpenOffice.org ¤ËÄɲÃÃæ"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "¥×¥ê¥ó¥¿ %s ¤ò Star Office/OpenOffice.org ¤ËÄɲä·¤Þ¤·¤¿¡£"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "¥×¥ê¥ó¥¿ %s ¤ò Star Office/OpenOffice.org ¤ËÄɲäǤ­¤Þ¤»¤ó¤Ç¤·¤¿¡£"
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "¥×¥ê¥ó¥¿¤ò Star Office/OpenOffice.org ¤«¤éºï½üÃæ"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "¥×¥ê¥ó¥¿ %s ¤ò Star Office/OpenOffice.org ¤«¤éºï½ü¤·¤Þ¤·¤¿¡£"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "¥×¥ê¥ó¥¿ %s ¤ò Star Office/OpenOffice.org ¤«¤éºï½ü¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿¡£"
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¥×¥ê¥ó¥¿ %s ¤òËÜÅö¤Ëºï½ü¤·¤Þ¤¹¤«¡©"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "¥×¥ê¥ó¥¿ \"%s\" ¤òºï½üÃæ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "¥×¥í¥­¥·¤ÎÀßÄê"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"¥×¥í¥¯¥·ÀßÄê¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤Ø¤¤¤é¤Ã¤·¤ã¤¤¤Þ¤»¡Á¡£\n"
-"\n"
-"¤³¤³¤Ç¤Ï http ¤È ftp ¤Î¥×¥í¥¯¥·¤òÀßÄꤷ¤Þ¤¹¡£\n"
-"¥í¥°¥¤¥ó¤ä¥Ñ¥¹¥ï¡¼¥É¤â¡¢É¬ÍפʤéÀßÄê¤Ç¤­¤Þ¤¹¡£\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"http ¥×¥í¥¯¥·¾ðÊó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤\n"
-"http proxy¤ò»È¤ï¤Ê¤¤¤Ê¤é¶õÍó¤Ë¤·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "¥Ý¡¼¥È"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url ¤Ï http://... ¤Ç¤Ï¤¸¤Þ¤ê¤Þ¤¹"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "¥Ý¡¼¥ÈÈÖ¹æ¤Ï¿ô»ú¤Ç¤¹¡£"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"ftp ¥×¥í¥¯¥·¾ðÊó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤\n"
-"ftp proxy¤ò»È¤ï¤Ê¤¤¤Ê¤é¶õÍó¤Ë¤·¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url ¤Ï ftp://... ¤Ç¤Ï¤¸¤Þ¤ê¤Þ¤¹"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"¥×¥í¥¯¥·¤Î¥í¥°¥¤¥ó̾¤È¥Ñ¥¹¥ï¡¼¥É¤¬¤¢¤ì¤ÐÆþÎϤ·¤Þ¤¹¡£\n"
-"¥í¥°¥¤¥ó/¥Ñ¥¹¥ï¡¼¥É¤¬¤Ê¤±¤ì¤Ð¶õÍó¤Î¤Þ¤Þ¤Ç¤¹"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "¥í¥°¥¤¥ó"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤ò¤â¤¦°ìÅÙÆþ¤ì¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤¬°ìÃפ·¤Þ¤»¤ó¡£¤â¤¦°ìÅÙÆþ¤ì¤Æ¤¯¤À¤µ¤¤¡ª"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥ÈºÑ¤ß¤Î RAID md%d ¤Ë¤Ï¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÄɲäǤ­¤Þ¤»¤ó"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s ¥Õ¥¡¥¤¥ë¤¬½ñ¤­¹þ¤á¤Þ¤»¤ó"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ¤Ë¼ºÇÔ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ¤Ë¼ºÇÔ (raidtools ¤¬Æþ¤Ã¤Æ¤Ê¤¤¤Î¤«¤â?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "RAID ¥ì¥Ù¥ë %d ¤Î¤¿¤á¤Ë¤Ï¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬ÉÔ­¤Ç¤¹\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (Àè¿ÊLinux ¥µ¥¦¥ó¥É¥¢¡¼¥­¥Æ¥¯¥Á¥ã) ¥µ¥¦¥ó¥É¥·¥¹¥Æ¥àµ¯Æ°"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ¤ÏÄê´üŪ¤Ê¥³¥Þ¥ó¥É¥¹¥±¥¸¥å¡¼¥é¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ¤Ï¥Ð¥Ã¥Æ¥ê¡¼¤Î¾õÂÖ¤òÄ´¤Ù¤Æ¤½¤ì¤òsyslog·Ðͳ¤Çµ­Ï¿¤·¤Þ¤¹¡£\n"
-"ÅÅÃÓ¤¬¤Ê¤¯¤Ê¤Ã¤¿¤È¤­¤Ë¥Þ¥·¥ó¤ò¥·¥ã¥Ã¥È¥À¥¦¥ó¤¹¤ë¤Î¤Ë¤â»È¤¨¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at¥³¥Þ¥ó¥É¤Ç¥¹¥±¥¸¥å¡¼¥ë¤µ¤ì¤¿¥³¥Þ¥ó¥É¤ò¡¢at¼Â¹Ô»þ¤Ë»ØÄꤷ¤¿»þ´Ö¤Ë\n"
-"¼Â¹Ô¤·¤Æ¡¢Ê¿¶ÑÉé²Ù¤¬Ä㤤¤È¤­¤Ë¥Ð¥Ã¥Á¥³¥Þ¥ó¥É¤ò¼Â¹Ô¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron¤ÏUNIXɸ½à¤Î¥×¥í¥°¥é¥à¤Ç¡¢¥æ¡¼¥¶»ØÄê¤Î¥×¥í¥°¥é¥à¤òÄê´üŪ¤Ë\n"
-"¼Â¹Ô¤·¤Þ¤¹¡£vixie cron¤Ïɸ½à¤ÎUNIX cron¤Ë¹âÅ٤ʥ»¥­¥å¥ê¥Æ¥£¤ä\n"
-"¶¯ÎϤÊÀßÄꥪ¥×¥·¥ç¥ó¤Ê¤É¤Îµ¡Ç½¤òÄɲ䷤Ƥ¤¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ¤ÏMidnight Commander¤Ê¤É¥Æ¥­¥¹¥È¥Ù¡¼¥¹¤ÎLinux¥½¥Õ¥È¤Ç¥Þ¥¦¥¹¤¬\n"
-"»È¤¨¤ë¤è¤¦¤Ë¤·¤Þ¤¹¡£¥Þ¥¦¥¹¤Ë¤è¤ë¥³¥ó¥½¡¼¥ë¤Ç¤Î¥«¥Ã¥È¡¦¥Ú¡¼¥¹¥È\n"
-"¤ä¡¢¥Ý¥Ã¥×¥¢¥Ã¥×¥á¥Ë¥å¡¼¤â»È¤¨¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ¤Ï¥Ï¡¼¥É¥¦¥§¥¢¤òõ¤·¤Æ¡¢²Äǽ¤Ê¤é¿·¤·¤¤¥Ï¡¼¥É¥¦¥§¥¢¤äÊѹ¹¤·¤¿\n"
-"¥Ï¡¼¥É¥¦¥§¥¢¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache¤ÏWorld Wide Web¥µ¡¼¥Ð¤Ç¡¢HTML ¥Õ¥¡¥¤¥ë¤äCGI¤Î¸ø³«¤Ë»È¤¤¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥È¡¦¥¹¡¼¥Ñ¡¼¥µ¡¼¥Ð¡¦¥Ç¡¼¥â¥ó (Ä̾Îinetd) ¤Ï¡¢É¬ÍפË\n"
-"±þ¤¸¤Æ¤½¤Î¾³Æ¼ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥µ¡¼¥Ó¥¹¤ò³«»Ï¤·¤Þ¤¹¡£telnet¡¢ftp¡¢\n"
-"rsh¡¢rlogin¤Ê¤É¤Î¥µ¡¼¥Ó¥¹³«»Ï¤òôÅö¤·¤Þ¤¹¡£inetd¤ò̵¸ú¤Ë¤¹¤ë¤È¡¢\n"
-"¤³¤¦¤·¤¿³Æ¼ï¥µ¡¼¥Ó¥¹¤¹¤Ù¤Æ¤¬Ìµ¸ú¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¹¶·â¤«¤é¥Þ¥·¥ó¤ò¼é¤ë¤¿¤á¤Î¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤ò\n"
-"ÀßÄꤹ¤ë¤Ë¤Ï¡¢Linux ¥«¡¼¥Í¥ë2.2 ¤Î¥Ñ¥±¥Ã¥È¥Õ¥£¥ë¥¿¤òµ¯Æ°¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"¤³¤Î¥Ñ¥Ã¥±¡¼¥¸¤Ï¡¢/etc/sysconfig/keyboard¤«¤éÀßÄꤷ¤¿¥­¡¼¥Ü¡¼¥É¥Þ¥Ã¥×¤ò\n"
-"¥í¡¼¥É¤·¤Þ¤¹¡£¤³¤ì¤Ïkbdconfig¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤ò»È¤Ã¤ÆÀßÄꤷ¤Þ¤¹¡£Ä̾ï¤Ï\n"
-"Í­¸ú¤Ë¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£"
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h ÍѤË\n"
-"/boot ¤Î¥«¡¼¥Í¥ë¥Ø¥Ã¥À¤òºÆÀ¸À®¤·¤Þ¤¹"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "µ¯Æ°»þ¤Ë¥Ï¡¼¥É¥¦¥§¥¢¤Î¼«Æ°¸¡½Ð¤ÈÀßÄê¤ò¤¹¤ë¡£"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ¤Ï¤È¤­¤É¤­¡¢¥·¥¹¥Æ¥àÀßÄê°Ý»ý¤Î¤¿¤á¤Ëµ¯Æ°»þ¤Ë\n"
-"³Æ¼ïºî¶È¤ò¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ¤Ï¥×¥ê¥ó¥¿¥Ç¡¼¥â¥ó¤Ç¡¢lpr¤ÎÆ°ºî¤ËɬÍפǤ¹¡£´ðËÜŪ¤Ë\n"
-"¤Ï¥×¥ê¥ó¥¿¤Ë°õºþ¥¸¥ç¥Ö¤ò¿¶¤êʬ¤±¤ë¥µ¡¼¥Ð¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux ¥Ð¡¼¥Á¥ã¥ë¥µ¡¼¥Ð¤Ï¡¢¹âÀ­Ç½¤Ç¤¤¤Ä¤Ç¤â»È¤¨¤ë¥µ¡¼¥Ð¤Î\n"
-"¹½Ãۤ˻Ȥ¤¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) ¤Ï¡¢IP¥¢¥É¥ì¥¹¤È¥Û¥¹¥È̾¤ò·ë¤Ó¤Ä¤±¤ë¤¿¤á¤Î¥É¥á¥¤¥ó̾¥µ¡¼¥Ð"
-"¡ÊDomain Name Server, DNS) ¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"¥Í¥Ã¥È¥ï¡¼¥¯¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à (NFS), SMB (LanManager/Windows),\n"
-"NCP (NetWare) ¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤ò¤¹¤Ù¤Æ¥Þ¥¦¥ó¥È¡¦¥¢¥ó¥Þ¥¦¥ó¥È¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"µ¯Æ°»þ¤ËÍ­¸ú¤Ë¤¹¤ëÀßÄê¤Î¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤ò¤¹¤Ù¤Æ¡¢\n"
-"Í­¸ú¡¦Ìµ¸ú¤Ë¤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ¤ÏTCP/IP¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ç¥Õ¥¡¥¤¥ë¶¦Í­¤ò¤¹¤ë¤Î¤Ë¤è¤¯»È¤¦¥×¥í¥È¥³¥ë\n"
-"¤Ç¤¹¡£¤³¤Î¥µ¡¼¥Ó¥¹¤Ï NFS ¥µ¡¼¥Ðµ¡Ç½¤òÄ󶡤·¤Þ¤¹¡£ÀßÄê¤Ë¤Ï/etc/exports \n"
-"¥Õ¥¡¥¤¥ë¤ò»È¤¤¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ¤ÏTCP/IP¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Ç¥Õ¥¡¥¤¥ë¶¦Í­¤ò¤¹¤ë¤Î¤Ë¤è¤¯»È¤¦¥×¥í¥È¥³¥ë\n"
-"¤Ç¤¹¡£¤³¤Î¥µ¡¼¥Ó¥¹¤Ï NFS ¥Õ¥¡¥¤¥ë¥í¥Ã¥¯µ¡Ç½¤òÄ󶡤·¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr "µ¯Æ°»þ¤Ë¥³¥ó¥½¡¼¥ë¤È XFree ¤Ç¼«Æ°Åª¤Ë numlock ¤òÍ­¸ú¤Ë¤¹¤ë¡£"
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w ¸ß´¹¤Îwin¥×¥ê¥ó¥¿¤ò¥µ¥Ý¡¼¥È"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ¥µ¥Ý¡¼¥È¤Ï¡¢¥é¥Ã¥×¥È¥Ã¥×¥³¥ó¥Ô¥å¡¼¥¿¤ÇEthernet¤ä¥â¥Ç¥à\n"
-"¤Ê¤É¤ÎPC¥«¡¼¥É¤ò»È¤¨¤ë¤è¤¦¤Ë¤¹¤ë¤¿¤á¤Î¤â¤Î¤Ç¤¹¡£ÀßÄꤹ¤ë¤Þ¤Ç\n"
-"¤Ïµ¯Æ°¤·¤Ê¤¤¤Î¤Ç¡¢É¬Íפʤ¤¥Þ¥·¥ó¤ËÆþ¤ì¤Æ¤¢¤Ã¤Æ¤â°ÂÁ´¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ¤Ï RPC Àܳ¤ò´ÉÍý¤·¤Þ¤¹¡£¤³¤ì¤ÏNFS¤äNIS¤Ê¤É¤Î¥×¥í¥È¥³¥ë¤Ç\n"
-"»ÈÍѤµ¤ì¤Þ¤¹¡£RPCµ¡¹½¤ò»È¤¦¥×¥í¥È¥³¥ë¤Î¥µ¡¼¥Ð¤È¤Ê¤ë¥Þ¥·¥ó¤Ç¤Ï¡¢¤³¤Î\n"
-"portmap ¥µ¡¼¥Ð¤¬Æ°¤¤¤Æ¤¤¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ¤Ï¥á¡¼¥ëžÁ÷¥¨¡¼¥¸¥§¥ó¥È¤Ç¤¹ (MTA) ¤Ç¤¹¡£¤³¤ì¤Ï¡¢¥Þ¥·¥ó´Ö¤Ç¥á¡¼¥ë¤ò¤ä"
-"¤ê¤È¤ê¤¹¤ë¥×¥í¥°¥é¥à¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Íð¿ôȯÀ¸¤Î¼Á¤ò¾å¤²¤ë¤¿¤á¤Ë¡¢¥·¥¹¥Æ¥à¤Î¥¨¥ó¥È¥í¥Ô¡¼¥×¡¼¥ë¤òÊݸ¡¦\n"
-"Éü³è¤µ¤»¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Oracle ¤Ê¤É¤Î¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤Ç»È¤¨¤ë¤è¤¦¤Ë¡¢¥Ö¥í¥Ã¥¯¥Ç¥Ð¥¤¥¹\n"
-"¤¿¤È¤¨¤Ð¥Ï¡¼¥É¥É¥é¥¤¥Ö¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ë¤òÀ¸¥Ç¥Ð¥¤¥¹¤Ë³ä¤ê¤Ä¤±¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed ¥Ç¡¼¥â¥ó¤Ï¡¢RIP¥×¥í¥È¥³¥ë¤ò»È¤Ã¤ÆIP¥Æ¡¼¥Ö¥ë¤Î¼«Æ°¹¹¿·¤ò\n"
-"²Äǽ¤Ë¤·¤Þ¤¹¡£RIP ¤Ï¾®µ¬Ìϥͥåȥ¥¯¤Ç¤ÏÊØÍø¤Ç¤è¤¯»È¤ï¤ì¤Þ¤¹¤¬¡¢\n"
-"¥Í¥Ã¥È¥ï¡¼¥¯¤¬Ê£»¨¤Ë¤Ê¤Ã¤Æ¤¯¤ë¤È¡¢¤³¤ì¤Ç¤ÏÉÔ½½Ê¬¤Ç¤¹¡£"
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat¥×¥í¥È¥³¥ë¤ò»È¤¦¤È¡¢¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¥æ¡¼¥¶¤¬¡¢¤½¤Î¥Í¥Ã¥È¥ï¡¼¥¯\n"
-"¤ËÀܳ¤·¤¿¥Þ¥·¥ó¤Î¤¹¤Ù¤Æ¤Ë¤Ä¤¤¤Æ¡¢À­Ç½»Øɸ¤òÆÀ¤é¤ì¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers¥×¥í¥È¥³¥ë¤Ç¤Ï¡¢¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¥æ¡¼¥¶¤¬¡¢±þÅú¤¹¤ë¤Û¤«¤Î¥Þ¥·¥ó\n"
-"¤Ë¥í¥°¥¤¥ó¤·¤Æ¤¤¤ë¿Í¤¿¤Á¤ò¸«¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ¥Ç¡¼¥â¥ó¤¬Áö¤Ã¤Æ¤¤¤ë¥Þ¥·¥ó¤Ç¤Ï¡¢¤½¤Î¥Þ¥·¥ó¤Ë¥í¥°¥¤¥óÃæ¤Î\n"
-"¥æ¡¼¥¶°ìÍ÷¤òrwho¥×¥í¥È¥³¥ë·Ðͳ¤Ç¸«¤é¤ì¤Þ¤¹ (finger¤Ë»÷¤Æ¤¤¤Þ¤¹)¡£"
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "¥µ¥¦¥ó¥É¥·¥¹¥Æ¥à¤òµ¯Æ°"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog ¤Ï¡¢³Æ¼ï¤Î¥Ç¡¼¥â¥ó¤¬¤¤¤í¤ó¤Ê¥í¥°¥Õ¥¡¥¤¥ë¤Ë¥á¥Ã¥»¡¼¥¸¤òµ­Ï¿\n"
-"¤¹¤ë¤È¤­¤Ë»È¤¤¤Þ¤¹¡£¤º¤Ã¤Èµ¯Æ°¤·¤Æ¤ª¤¯¤Û¤¦¤¬¤¤¤¤¤Ç¤·¤ç¤¦¡£"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "usb ¥Ç¥Ð¥¤¥¹ÍѤΥɥ饤¥Ð¤òÆɤ߹þ¤ß¤Þ¤·¤ç¤¦¡£"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X¥Õ¥©¥ó¥È¥µ¡¼¥Ð¤ò³«»Ï¤·¤Þ¤¹¡ÊXFree »ÈÍѤˤÏɬ¿Ü¡Ë¡£"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "µ¯Æ°»þ¤Ë¼«Æ°Åª¤Ë¤¿¤Á¤¢¤²¤ë¥µ¡¼¥Ó¥¹¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "°õºþ"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "¥Õ¥¡¥¤¥ë¶¦Í­"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "¥·¥¹¥Æ¥à"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "¥ê¥â¡¼¥È´ÉÍý"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "¥Ç¡¼¥¿¥Ù¡¼¥¹¥µ¡¼¥Ð"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "¥µ¡¼¥Ó¥¹: %d ¤¬ %d ÍѤ˵¯Æ°¤·¤¿¤Î¤òÅÐÏ¿"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "¥µ¡¼¥Ó¥¹"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "¼Â¹ÔÃæ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "Ää»ßÃæ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "¥µ¡¼¥Ó¥¹¤È¥Ç¡¼¥â¥ó"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"¤³¤Î¥µ¡¼¥Ó¥¹¤Ë¤Ä¤¤¤Æ¤Ï¡¢ÄɲäÎ\n"
-"¾ðÊó¤Ï¤¢¤ê¤Þ¤»¤ó¡£¤´¤á¤ó¤Ê¤µ¤¤¡£"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "µ¯Æ°»þ¤ÎÆ°ºî"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "³«»Ï"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Ää»ß"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Mandrake Linux 8.2¤ò¤ªÁª¤Ó¤¤¤¿¤À¤­¤Þ¤·¤Æ¤¢¤ê¤¬¤È¤¦¤´¤¶¤¤¤Þ¤¹"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "¥ª¡¼¥×¥ó¥½¡¼¥¹¤ÎÀ¤³¦¤Ø¤è¤¦¤³¤½"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSoft ¤ÎÀ®¸ù¤Ï¡¢¥Õ¥ê¡¼¥½¥Õ¥È¤Î¸¶Íý¤Ëº¬¤¶¤·¤¿¤â¤Î¤Ç¤¹¡£"
-"¤¢¤Ê¤¿¤Î¿·¥ª¥Ú¥ì¡¼¥Æ¥£¥ó¥°¥·¥¹¥Æ¥à¤Ï¡¢Á´À¤³¦¤Î Linux ¥³¥ß¥å¥Ë¥Æ¥£¤Ë"
-"¤è¤ë¶¦Æ±ºî¶È¤ÎÀ®²Ì¤Ê¤Î¤Ç¤¹¡£"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "¥Õ¥ê¡¼¥½¥Õ¥È¤ÎÀ¤³¦¤Ë»²²Ã¤·¤Þ¤·¤ç¤¦"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"¥ª¡¼¥×¥ó¥½¡¼¥¹¥³¥ß¥å¥Ë¥Æ¥£¤Î¤³¤È¤ò¤â¤Ã¤ÈÃΤäơ¢¤½¤Î°ì°÷¤Ë¤Ê¤ê¤Þ¤·¤ç¤¦¡£"
-"¡Ö¥³¥ß¥å¥Ë¥Æ¥£¡×¥¦¥§¥Ö¥Ú¡¼¥¸¤Ë¤¢¤ë³Æ¼ï¥Õ¥©¡¼¥é¥à¤Ë»²²Ã¤·¤Æ¡¢³Ø¤Ó¡¢¶µ¤¨¡¢"
-"¤Û¤«¤Î¿Í¡¹¤ò½õ¤±¤Þ¤·¤ç¤¦¡£"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤È¥á¥Ã¥»¡¼¥¸"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 ¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ÎÄ󶡤¹¤ë¤â¤Î¤¹¤Ù¤Æ¤Ë¥¢¥¯¥»¥¹¤Ç¤­¤ë"
-"ºÇ¹â¤Î¥½¥Õ¥È¤ò¼è¤ê¤½¤í¤¨¤Æ¤¤¤Þ¤¹¡£¥¦¥§¥Ö¤ò¥µ¡¼¥Õ¥£¥ó¤·¤Æ¡¢Æ°²è¤ò¸«¤ë¤Ê¤é"
-"Mozilla ¤È Konqueror ¤¬¤¢¤ë¤·¡¢¥á¡¼¥ë¤ÎÁ÷¼õ¿®¤È¸Ä¿Í¾ðÊó´ÉÍý¤Ï"
-"Evolution ¤È Kmail, ¤½¤Î¾¤Ê¤ó¤Ç¤â¤¢¤ê¤Þ¤¹¡£"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¤È²èÁü"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 ¤Ï¡¢¥Þ¥ë¥Á¥á¥Ç¥£¥¢µ¡Ç½¤ò¶Ë¸Â¤Þ¤Ç»È¤¤Åݤ·¤Þ¤¹¡ª"
-"ºÇ¿·¥½¥Õ¥È¤Ç²»³Ú¤ä²»À¼¥Õ¥¡¥¤¥ë¤ÎºÆÀ¸¤ò¤·¤¿¤ê¡¢²èÁü¤ä¼Ì¿¿¤ò´ÉÍý¤·¤¿¤ê¡¢"
-"¥Æ¥ì¥Ó¤ò¸«¤¿¤ê¡¢¤½¤Î¾¤Ê¤ó¤Ç¤â¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "³«È¯ÍÑ"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 ¤Ïµæ¶Ë¤Î³«È¯¥×¥é¥Ã¥È¥Û¡¼¥à¤Ç¤¹¡£"
-"GNU gcc ¥³¥ó¥Ñ¥¤¥é¤ò¤Ï¤¸¤á¡¢ºÇ¹â¤Î¥ª¡¼¥×¥ó¥½¡¼¥¹"
-"³«È¯´Ä¶­¤Î°ÒÎϤòȯ¸«¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼¤Ï¡¢Mandrake ¥·¥¹¥Æ¥à¤Î"
-"¥«¥¹¥¿¥Þ¥¤¥º¤ÈÀßÄê¤Î¤¿¤á¤Î¥ï¥ó¥¹¥È¥Ã¥×¥Ñ¥Í¥ë½¸¤Ç¤¹¡£"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "¥æ¡¼¥¶¥¤¥ó¥¿¡¼¥Õ¥§¥¤¥¹"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 ¤Ë¤Ï11¼ïÎà¤Î¥°¥é¥Õ¥£¥Ã¥¯¥Ç¥¹¥¯¥È¥Ã¥×´Ä¶­¤È"
-"¥¦¥£¥ó¥É¥¦¥Þ¥Í¡¼¥¸¥ã¤¬Æþ¤Ã¤Æ¤¤¤Þ¤¹¡£GNOME 1.4, KDE 2.2.2,"
-" Window Maker 0.8 ¤Ê¤É¤Ç¤¹¡£"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "¥µ¡¼¥Ð¥½¥Õ¥È"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"¥Þ¥¦¥¹¤ò¤Û¤ó¤Î¿ô¥¯¥ê¥Ã¥¯¤¹¤ë¤À¤±¤Ç¡¢¤¢¤Ê¤¿¤Î¥Þ¥·¥ó¤Ï"
-"¶¯ÎϤʥµ¡¼¥Ð¤ËÁáÊѤï¤ê¡ª¥¦¥§¥Ö¥µ¡¼¥Ð¡¢¥á¡¼¥ë¡¢¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¡¢"
-"¥ë¡¼¥¿¡¢¥Õ¥¡¥¤¥ë¥µ¡¼¥Ð¤Ë°õºþ¥µ¡¼¥Ð¤Ê¤É¤â¤í¤â¤í¤Ç¤¹¡£"
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "¥²¡¼¥à"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 ¤Ë¤Ï¡¢ºÇ¹â¤Î¥ª¡¼¥×¥ó¥½¡¼¥¹¥²¡¼¥à¤¬¤Ä¤¤¤Æ¤­¤Þ¤¹¡£"
-"¥¢¡¼¥±¡¼¥É·¿¡¢¥¢¥¯¥·¥ç¥ó·¿¡¢¥«¡¼¥É¥²¡¼¥à¡¢¥¹¥Ý¡¼¥Ä¡¢Àïά¥²¡¼¥à..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Linux ¤ò¼ê·Ú¤Ë¤¹¤Ð¤ä¤¯¡¢ÌµÎÁ¤ÇÊÙ¶¯¤·¤¿¤¤¤Ç¤¹¤«¡© MandrakeSoft ¤Ï"
-"̵ÎÁ¤ÎLinux ¥È¥ì¡¼¥Ë¥ó¥°¤ä¡¢¤¹¤¹¤ß¶ñ¹ç¤ò¥Á¥§¥Ã¥¯¤¹¤ëÊýË¡¤òÄ󶡤·¤Æ¤¤¤Þ¤¹¡£"
-"¤½¤ì¤¬MandrakeCampus -- ÊÀ¼Ò¤Î¥ª¥ó¥é¥¤¥ó¸¦½¤¥»¥ó¥¿¡¼¤Ç¤¹¡£"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "Mandrake¥¨¥­¥¹¥Ñ¡¼¥È"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Linux ¥³¥ß¥å¥Ë¥Æ¥£¤È MandrakeSoft ¤«¤é¤Î¹â¼Á¤Ê¥µ¥Ý¡¼¥È¤¬¤¹¤°¤ËÆÀ¤é¤ì¤Þ¤¹¡£"
-"¤½¤·¤Æ¤¢¤Ê¤¿¤¬¶Ú¶âÆþ¤ê¤Î Linux ¿Í¤Ê¤é¡¢¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×¤Ë¤Ê¤Ã¤Æ¥µ¥Ý¡¼¥ÈÍÑ"
-"¥¦¥§¥Ö¥µ¥¤¥È¤ÇÃ챤ò¶¦Í­¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "Mandrake ¥³¥ó¥µ¥ë¥Æ¥£¥ó¥°"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"¤¢¤é¤æ¤ë IT ¥×¥í¥¸¥§¥¯¥È¤Ë¤Ä¤¤¤Æ¡¢ÊÀ¼Ò¤Î¥³¥ó¥µ¥ë¥¿¥ó¥È¤¿¤Á¤¬Í×·ï¤òʬÀϤ·¡¢"
-"¥«¥¹¥¿¥à²½¤·¤¿¥½¥ê¥å¡¼¥·¥ç¥ó¤òÄó°Æ¤¤¤¿¤·¤Þ¤¹¡£Linux ¥Ù¥ó¥À¡¼¤È¤·¤Æ¤Î"
-" MandrakeSoft ¤ÎÇüÂç¤Ê·Ð¸³¤òÀ¸¤«¤·¤Æ¡¢¤¢¤Ê¤¿¤Î¥Ó¥¸¥Í¥¹ÁÈ¿¥¸þ¤±¤Ë"
-"¿¿¤Î ITÂåÂذƤòÄ󶡤¤¤¿¤·¤Þ¤¹¡£"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"¥Õ¥ë¥ì¥ó¥¸¤ÎLinux ¥½¥ê¥å¡¼¥·¥ç¥ó¤ä¡¢À½Éʤä³Æ¼ï¥¢¥¤¥Æ¥à¤ÎÆòÁÈÎÇ䤬¡¢"
-"ÊÀ¼Ò¤Î¥ª¥ó¥é¥¤¥ó¾¦Å¹¤Ç¼ê¤ËÆþ¤ê¤Þ¤¹¡£"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"MandrakeSoft ¤ÎÀìÌ祵¡¼¥Ó¥¹¤äÈÎÇ侦ÉʤˤĤ¤¤Æ¾Ü¤·¤¯¤Ï°Ê²¼¤Î"
-"¥¦¥§¥Ö¥Ú¡¼¥¸¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ëÃæ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥Æ¡¼¥Ö¥ë¤¬Æɤá¤Þ¤»¤ó¡¤²õ¤ì¤Æ¤¤¤ë¤è¤¦¤Ç¤¹:(\n"
-"ÉÔÀµ¤Ê¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¶õÇò¤ÇËä¤á¤è¤¦¤È¤·¤Þ¤¹"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "¥¨¥é¡¼¡ª"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "ɬÍפʲèÁü¥Õ¥¡¥¤¥ë %s ¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "¼«Æ°¥¤¥ó¥¹¥È¡¼¥ëÀßÄê"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"¤³¤ì¤«¤é¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¥Õ¥í¥Ã¥Ô¡¼¤òÀßÄꤷ¤Þ¤¹¡£¤³¤Îµ¡Ç½¤Ï¤¤¤µ¤µ¤«´í¸±¤Ê¤Î¤Ç"
-"¿µ½Å¤Ë»È¤Ã¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¤³¤Îµ¡Ç½¤Ç¤Ï¡¢¤³¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Ç¤ä¤Ã¤¿¥¤¥ó¥¹¥È¡¼¥ë¤òÊ̤Υޥ·¥ó¤ÇºÆ¸½¤Ç¤­¤Þ"
-"¤¹¡£¤¿¤À¤·¤È¤­¤É¤­¥×¥í¥ó¥×¥È¤¬½Ð¤Æ¡¢Ãͤ¬Êѹ¹¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"¤¤¤Á¤Ð¤ó°ÂÁ´¤Ë¤ä¤ë¤Ë¤Ï¡¢¥Ñ¡¼¥Æ¥£¥·¥ç¥óÀÚ¤ê¤È¥Õ¥©¡¼¥Þ¥Ã¥È¤Ï¼«Æ°²½¤·¤Æ¤Ï¤¤¤±¤Þ"
-"¤»¤ó¡£¤É¤ó¤Ê¥Ñ¡¼¥Æ¥£¥·¥ç¥óÊý¼°¤Ë¤·¤¿¾ì¹ç¤Ç¤â¤½¤¦¤Ç¤¹¡£\n"
-"\n"
-"³¤±¤Þ¤¹¤«¡©"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "µ¯Æ°¥¹¥Æ¥Ã¥×ÀßÄê"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"³Æ¥¹¥Æ¥Ã¥×¤Ç¡¢¤¢¤Ê¤¿¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÈƱ¤¸¤Ë¤¹¤ë¤«¡¢¼êÆ°ÀßÄꤹ¤ë¤«¤òÁª¤Ó¤Þ¤¹¡£"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"¤¤¤é¤Ã¤·¤ã¤¤¤Þ¤»¡Á\n"
-"\n"
-"¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¤Î¥Ñ¥é¥á¡¼¥¿¤¬º¸¤Ëɽ¼¨¤µ¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "¤ª¤á¤Ç¤È¤¦¤´¤¶¤¤¤Þ¤¹¡ª"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"¥Õ¥í¥Ã¥Ô¡¼¤¬Àµ¤·¤¯ºî¤é¤ì¤Þ¤·¤¿¡£\n"
-"¤³¤ì¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤¬ºÆ¸½¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "¥¢¥¤¥Æ¥àÄɲÃ"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "ºÇ¸å¤Î¥¢¥¤¥Æ¥à¤òºï½ü"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Êó¹ð \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup ¥Ç¡¼¥â¥óÊó¹ð\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup ¾ÜºÙÊó¹ð\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "¿Ê¹Ô¾õ¶·"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "¥æ¡¼¥¶¥Õ¥¡¥¤¥ë¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "¥Ï¡¼¥É¥Ç¥£¥¹¥¯¥Ð¥Ã¥¯¥¢¥Ã¥×¤Î¿Ê¹Ô..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "¾¤Î¥Õ¥¡¥¤¥ë¤ò¥Ð¥Ã¥¯¥¢¥Ã¥×..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"FTP ¤ÇÁ÷¤ë¥Õ¥¡¥¤¥ë¤Î¥ê¥¹¥È: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP Àܳ¤Î¥È¥é¥Ö¥ë: FTP¤Ç¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤òÁ÷¤ì¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) ¥á¡¼¥ëÁ÷¿®Ãæ¤Ë¥¨¥é¡¼¡£\n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "¥Õ¥¡¥¤¥ë¤òÁªÂò"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "¥Õ¥¡¥¤¥ë¤ä¥Ç¥£¥ì¥¯¥È¥ê¤òÁª¤ó¤Ç¡ÖÄɲáפò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"ɬÍפʥª¥×¥·¥ç¥ó¤Ë¥Á¥§¥Ã¥¯¤ò¤Ä¤±¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï /etc ¥Ç¥£¥ì¥¯¥È¥ê¤Î¥Õ¥¡¥¤¥ë¤ò¤¹¤Ù¤Æ¥Ð¥Ã¥¯¥¢¥Ã¥×¡¦Éü¸µ¤Ç¤­¤Þ"
-"¤¹¡£\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¡Ê/etc¥Ç¥£¥ì¥¯¥È¥ê)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "¥¤¥ó¥¯¥ê¥á¥ó¥¿¥ë¥Ð¥Ã¥¯¥¢¥Ã¥×¡Ê¸Å¤¤¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ï»Ä¤¹)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "½ÅÍ×¥Õ¥¡¥¤¥ë (passwd, group, fstab) ¤Ï´Þ¤á¤Ê¤¤"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"¤³¤Î¥ª¥×¥·¥ç¥ó¤Ç¤Ï¡¢¹¥¤­¤Ê¥Ð¡¼¥¸¥ç¥ó¤Î /etc ¥Ç¥£¥ì¥¯¥È¥ê¤ò\n"
-"Éü¸µ¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ë´Þ¤á¤¿¤¤¥æ¡¼¥¶¤òÁ´°÷Áª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "¥Ö¥é¥¦¥¶¤Î¥­¥ã¥Ã¥·¥å¤Ï´Þ¤á¤Ê¤¤"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "¥¤¥ó¥¯¥ê¥á¥ó¥¿¥ë¥Ð¥Ã¥¯¥¢¥Ã¥×¡Ê¸Å¤¤¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ï»Ä¤¹)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Áª¤ó¤À¤â¤Î¤òºï½ü"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "¥æ¡¼¥¶Ì¾"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ë FTP Àܳ¤ò»ÈÍÑ"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "¥Û¥¹¥È̾¤« IP ¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"¤³¤Î¥Û¥¹¥È¾å¤Ç¤½¤Î¥Ç¥£¥ì¥¯¥È¥ê¤Ë\n"
-"¥Ð¥Ã¥¯¥¢¥Ã¥×¤òÊݸ¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "¥í¥°¥¤¥ó̾¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "¥Ñ¥¹¥ï¡¼¥É¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "¤³¤Î¥Ñ¥¹¥ï¡¼¥É¤òµ­²±¤¹¤ë"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP Àܳ"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "¥»¥­¥å¥¢Àܳ"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "CD/DVDROM ¤Ë¥Ð¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "CD ¥¹¥Ú¡¼¥¹¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "CDRW¤ò»È¤Ã¤Æ¤¤¤ë¾ì¹ç¤Ï¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "¤Þ¤º CDRW ¤ò¾Ãµî¤¹¤ë¾ì¹ç¤Ë¤Ï¤³¤³¤ò¥¯¥ê¥Ã¥¯"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"CD ¤Ëµ¯Æ°ÍѤÎboot¤ò´Þ¤á¤ë¤Ê¤é\n"
-"¥Á¥§¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"CD ¥é¥¤¥¿¡¼¤Î¥Ç¥Ð¥¤¥¹Ì¾¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤\n"
-"Îã: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "¥Æ¡¼¥×¤Ë¥Ð¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×ÍѥǥХ¤¥¹Ì¾¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Drakbackup¤Ëµö¤µ¤ì¤ëºÇÂ祵¥¤¥º¤ò\n"
-"ÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Êݸ¤¹¤ë¥Ç¥£¥ì¥¯¥È¥ê¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤Î¥¯¥©¡¼¥¿¤ò»È¤¦"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "¥Ï¡¼¥É¥É¥é¥¤¥Ö / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "Ëè»þ´Ö"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "ËèÆü"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "Ëè½µ"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "Ëè·î"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "¥Ç¡¼¥â¥ó¤ò»È¤¦"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¤Î´Ö³Ö¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"¥Ð¥Ã¥¯¥¢¥Ã¥×¤Î¥á¥Ç¥£¥¢¤ò\n"
-"Áª¤ó¤Ç¤¯¤À¤µ¤¤¤Í¡£"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "¥Ç¡¼¥â¥ó¤Ç¥Ï¡¼¥É¥É¥é¥¤¥Ö¤ò»È¤¦"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "¥Ç¡¼¥â¥ó¤Ç FTP ¤ò»È¤¦"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "¥µ¡¼¥Ó¥¹¤Ë cron ¥Ç¡¼¥â¥ó¤¬´Þ¤Þ¤ì¤Æ¤¤¤ë¤³¤È¤ò³Îǧ¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×Ëè¤ÎÊó¹ð¥á¡¼¥ëÁ÷¤êÀè: "
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "²¿¤ò"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "¤½¤³¤Ë"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "¤¤¤Ä"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "¤½¤Î¾¥ª¥×¥·¥ç¥ó"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup ÀßÄê"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×Àè¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "¥Ï¡¼¥É¥É¥é¥¤¥Ö¤Ø"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯·Ðͳ¤Ç"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¤·¤¿¤¤¤â¤Î¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "¥·¥¹¥Æ¥à¤ò¥Ð¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "¥æ¡¼¥¶¤ò¥Ð¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "¥æ¡¼¥¶¤ò¼êÆ°¤ÇÁª¤Ö"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"¥Ð¥Ã¥¯¥¢¥Ã¥×¸µ: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- ¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- ¥æ¡¼¥¶¥Õ¥¡¥¤¥ë:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ¤½¤Î¾¥Õ¥¡¥¤¥ë:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- ¥Ï¡¼¥É¥É¥é¥¤¥Ö¾å¤ÎÊݸ¥Ñ¥¹ : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- FTP ¤Ç¤ÎÊݸÀè¥Û¥¹¥È : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t ¥æ¡¼¥¶Ì¾: %s\n"
-"\t\t ¥Ñ¥¹: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- ¥ª¥×¥·¥ç¥ó:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\t¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë¤Ï´Þ¤á¤Ê¤¤\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç tar ¤È bzip2¤ò»ÈÍÑ\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\t¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç tar ¤È gzip¤ò»ÈÍÑ\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- ¥Ç¡¼¥â¥ó (%s) ¤¬´Þ¤à¤â¤Î :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-¥Ï¡¼¥É¥É¥é¥¤¥Ö¡£\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-¥Í¥Ã¥È¥ï¡¼¥¯¤Ç FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-¥Í¥Ã¥È¥ï¡¼¥¯¤Ç SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "ÀßÄ꤬¤¢¤ê¤Þ¤»¤ó¡£¥¦¥£¥¶¡¼¥É¤«¾åµé¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Éü¸µ¤¹¤ë¥Ç¡¼¥¿¤Î°ìÍ÷:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"²õ¤ì¤Æ¤¤¤ë¥Ç¡¼¥¿°ìÍ÷:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "¼¡²ó¤Ë¥Á¥§¥Ã¥¯¤ò¤Ï¤º¤¹¤«ºï½ü¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤¬²õ¤ì¤Æ¤¤¤Þ¤¹"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          ÁªÂò¤·¤¿¥Ç¡¼¥¿¤Ï¤¹¤Ù¤Æ          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          %s ¾å¤ËÉü¸µ¤µ¤ì¤Þ¤·¤¿      "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         ÀßÄêÉü¸µ       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "¾¤Î¥Õ¥¡¥¤¥ëÉü¸µ¤Ë¤ÏOK¤ò"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Éü¸µ¤¹¤ë¥æ¡¼¥¶¤Î°ìÍ÷¡Ê³Æ¥æ¡¼¥¶¤ÎºÇ¿·¤ÎÆüÉÕ¤À¤±¤¬½ÅÍפǤ¹¡Ë"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×´ü¸Â:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Éü¸µ¤¹¤ëÆüÉÕ¤òÁªÂò¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ë¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤ò»ÈÍÑ"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤«¤éÉü¸µ¤¹¤ë"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¤ÎÊݸ¥Ç¥£¥ì¥¯¥È¥ê¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Éü¸µ¸µ¤Î¥á¥Ç¥£¥¢¤òÁª¤Ó¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "¤½¤Î¾¥á¥Ç¥£¥¢"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "¥·¥¹¥Æ¥àÉü¸µ"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "¥æ¡¼¥¶Éü¸µ"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "¤½¤Î¾¥Õ¥¡¥¤¥ë¤òÉü¸µ"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Éü¸µ¥Ñ¥¹¤òÁª¤Ö¡Ê/°Ê³°)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Éü¸µÁ°¤Ë¿·µ¬¥Ð¥Ã¥¯¥¢¥Ã¥×¡Ê¥¤¥ó¥¯¥ê¥á¥ó¥¿¥ë¥Ð¥Ã¥¯¥¢¥Ã¥×¤Î¤ß¡Ë"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Éü¸µÁ°¤Ë¥æ¡¼¥¶¥Ç¥£¥ì¥¯¥È¥ê¤òºï½ü"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Á´¥Ð¥Ã¥¯¥¢¥Ã¥×¤ÎÉü¸µ"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "¥«¥¹¥¿¥àÉü¸µ"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "¥Ø¥ë¥×"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "¤â¤É¤ë"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Êݸ"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¹½ÃÛ"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Éü¸µ"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "¼¡"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Éü¸µ¤¹¤ë¤Ë¤Ï¥Ð¥Ã¥¯¥¢¥Ã¥×¤ò¤Þ¤º¹½ÃÛ¤·¤Æ¤¯¤À¤µ¤¤...\n"
-"¤¢¤ë¤¤¤ÏÊݸÀè¥Ñ¥¹¤ÏÀµ¤·¤¤¤Ç¤¹¤«¡©"
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"¥á¡¼¥ëÁ÷¿®¥¨¥é¡¼\n"
-"  Êó¹ð¥á¡¼¥ë¤ÏÁ÷¿®¤Ç¤­¤Þ¤»¤ó\n"
-"  sendmail¤òÀßÄꤷ¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸°ìÍ÷"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"FTP¤Ç¤Î¥Õ¥¡¥¤¥ëžÁ÷Ãæ¤Ë¥¨¥é¡¼.\n"
-"FTP ÀßÄê¤ò¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Éü¸µ¥Ç¡¼¥¿¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¤Í¡£"
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×ÍÑ¥á¥Ç¥£¥¢¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¤Í¡£"
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×¤¹¤ë¥Ç¡¼¥¿¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"ÀßÄê¥Õ¥¡¥¤¥ë¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó\n"
-"¥¦¥£¥¶¡¼¥É¤«¾åµé¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "¤Þ¤À³«È¯Ãæ...ÂԤäƤƤ¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë¤ò¥Ð¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "¥æ¡¼¥¶¥Õ¥¡¥¤¥ë¤ò¥Ð¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "¤½¤Î¾¥Õ¥¡¥¤¥ë¤ò¥Ð¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Á´ÂΤοʹԾõ¶·"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "FTP¤Ç¥Õ¥¡¥¤¥ëÁ÷¿®Ãæ"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "¥Õ¥¡¥¤¥ëÁ÷¿®Ãæ..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "CDROM¤Ë´Þ¤á¤ë¥Ç¡¼¥¿°ìÍ÷"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "CD¥é¥¤¥¿¡¼¤Î®ÅÙ¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "CD¥é¥¤¥¿¤Î¥Ç¥Ð¥¤¥¹Ì¾¤òÆþÎÏ¡ÊÎã: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "ÀßÄê¥Õ¥¡¥¤¥ë¤«¤éº£¤¹¤°¥Ð¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "¥Ð¥Ã¥¯¥¢¥Ã¥×ÀßÄê¤ò¸«¤ë"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "¥¦¥£¥¶¡¼¥ÉÀßÄê"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "¾åµéÀßÄê"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "º£¤¹¤°¥Ñ¥Ã¥¯¥¢¥Ã¥×"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"¥ª¥×¥·¥ç¥ó¤ÎÀâÌÀ:\n"
-"\n"
-" ¤³¤Î¥¹¥Æ¥Ã¥×¤Ç¤Ï¡¢Drakbackup ¤Ç°Ê²¼¤¬Êѹ¹¤Ç¤­¤Þ¤¹:\n"
-"\n"
-" - °µ½Ì¥â¡¼¥É:\n"
-"    \n"
-"      bzip2 °µ½Ì¤òÁª¤Ù¤Ð¡¢°µ½ÌΨ¤Ï gzip ¤è¤ê¹â¤¯\n"
-"      ¤Ê¤ê¤Þ¤¹ ( 2-10 %¤Û¤É²þÁ±).\n"
-"      ¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï̵¸ú¤Ë¤·¤Æ¤¢¤ê¤Þ¤¹¡£°µ½Ì¤Ë¤«¤«¤ë\n"
-"      »þ´Ö¤¬Áý¤¨¤ë¤«¤é¤Ç¤¹ ( 10ÇÜÄøÅÙ).\n"
-" \n"
-" - ¹¹¿·¥â¡¼¥É:\n"
-"\n"
-"      ¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¥Ð¥Ã¥¯¥¢¥Ã¥×¤ò¹¹¿·¤·¤Æ¤¯¤ì¤Þ¤¹¤¬¡¢\n"
-"      ¼Â¤Ï¤¢¤Þ¤êÌò¤Ë¤¿¤Á¤Þ¤»¤ó¡£¹¹¿·¤¹¤ë¤È¤­¥Ð¥Ã¥¯¥¢¥Ã¥×¤ò\n"
-"      ¤ï¤¶¤ï¤¶Å¸³«¤·¤Ê¤¤¤È¥À¥á¤À¤«¤é¤Ç¤¹¡£\n"
-"      \n"
-" - .backupignore ¡Ê¥Ð¥Ã¥¯¥¢¥Ã¥×̵»ë¡Ë¥â¡¼¥É:\n"
-"\n"
-"      cvs ¤ÈƱ¤¸¤è¤¦¤Ë¡¢Drakbackup ¤Ï ³Æ¥Ç¥£¥ì¥¯¥È¥ê¤Î\n"
-"      .backupignore ¥Õ¥¡¥¤¥ë¤Ëµ­½Ò¤µ¤ì¤¿¤â¤Î¤ò̵»ë¤·¤Þ¤¹¡£\n"
-"      Îã: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" ¥á¡¼¥ëÁ÷¿®Ãæ¤Î°ìÉô¤Î¥¨¥é¡¼¤Ï¡¢postfix¤ÎÀßÄ꤬\n"
-" ¤Þ¤Á¤¬¤Ã¤Æ¤¤¤ë¤»¤¤¤Ç¤¹¡£¤³¤ì¤òľ¤¹¤Ë¤Ï¡¢\n"
-" /etc/postfix/main.cf¤Î myhostname ¤« mydomain ¤òÀßÄꤷ¤Þ¤¹¡£\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"¥ª¥×¥·¥ç¥ó¤ÎÀâÌÀ:\n"
-"\n"
-" - ¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×:\n"
-"       \n"
-"\t¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¡¢ÀßÄê¥Õ¥¡¥¤¥ë¤¬Êݸ¤µ¤ì¤Æ¤¤¤ë\n"
-"\t /etc ¥Ç¥£¥ì¥¯¥È¥ê¤ò¥Ð¥Ã¥¯¥¢¥Ã¥×¤·¤Þ¤¹¡£Éü¸µ»þ¤Ë¤Ï\n"
-"\t°Ê²¼¤Î¥Õ¥¡¥¤¥ë¤ò¾å½ñ¤­¤·¤Ê¤¤¤è¤¦¤ËÃí°Õ¤·¤Æ¤¯¤À¤µ¤¤:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - ¥æ¡¼¥¶¥Õ¥¡¥¤¥ë¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×: \n"
-"\n"
-"\t¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¡¢¥Ð¥Ã¥¯¥¢¥Ã¥×¤·¤¿¤¤¥æ¡¼¥¶¤òÁª¤Ó¤Þ¤¹¡£\n"
-"\t¥Ç¥£¥¹¥¯ÀáÌó¤Î¤¿¤á¡¢¥¦¥§¥Ö¥Ö¥é¥¦¥¶¤Î¥­¥ã¥Ã¥·¥å¤Ï´Þ¤á¤Ê¤¤\n"
-"\t¤è¤¦¤Ë¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-" - ¤½¤Î¾¥Õ¥¡¥¤¥ë¤ò¥Ð¥Ã¥¯¥¢¥Ã¥×: \n"
-"\n"
-"\tÊݸ¤·¤¿¤¤¥Ç¡¼¥¿¤ò¤µ¤é¤ËÄɲ乤륪¥×¥·¥ç¥ó¤Ç¤¹¡£\n"
-"\t¤³¤ì¤òÁª¤Ö¤È¡¢¥¤¥ó¥¯¥ê¥á¥ó¥¿¥ë¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ï\n"
-"\tÁª¤Ù¤Þ¤»¤ó¡£\t\t\n"
-" \n"
-" - ¥¤¥ó¥¯¥ê¥á¥ó¥¿¥ë¥Ð¥Ã¥¯¥¢¥Ã¥×:\n"
-"\n"
-"\t¤³¤ì¤Ï¥Ð¥Ã¥¯¥¢¥Ã¥×ºÇ¶¯¤Î¥ª¥×¥·¥ç¥ó¤Ç¤¹¡£\n"
-"\tºÇ½é¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç¤ÏÁ´¥Ç¡¼¥¿¤¬¥Ð¥Ã¥¯¥¢¥Ã¥×¤µ¤ì¡¢\n"
-"\t¤½¤Î¸å¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç¤ÏÊѹ¹¤µ¤ì¤¿¤â¤Î¤À¤±¤¬\n"
-"\tÊݸ¤µ¤ì¤Þ¤¹¡£\n"
-"\t¤½¤·¤ÆÉü¸µ¤¹¤ë¤È¤­¤Ë¤Ï¡¢»ØÄêÆü»þ¤Î¥Ç¡¼¥¿¤¬Éü¸µ\n"
-"\t¤Ç¤­¤Þ¤¹¡£\n"
-"\t¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ð¤Ê¤¤¤È¡¢¸Å¤¤¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ï\n"
-"\tËè²óºï½ü¤µ¤ì¤Þ¤¹¡£    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Éü¸µ¤ÎÀâÌÀ:\n"
-" \n"
-"»È¤ï¤ì¤ë¤Î¤ÏºÇ¿·¥Ç¡¼¥¿¤À¤±¤Ç¤¹¡£¥¤¥ó¥¯¥ê¥á¥ó¥¿¥ë¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç¤Ï\n"
-"¿·¤·¤¤¤â¤Î¤«¤é½ç¤Ë°ì¤Ä¤Å¤ÄÉü¸µ¤·¤Ê¤±¤ì¤Ð¤Ê¤é¤Ê¤¤¤«¤é¤Ç¤¹¡£\n"
-"\n"
-"¤·¤¿¤¬¤Ã¤Æ¡¢ÆÃÄê¥æ¡¼¥¶¤òÉü¸µ¤·¤¿¤¯¤Ê¤±¤ì¤Ð¡¢¤½¤Î¿Í¤Î¥Á¥§¥Ã¥¯\n"
-"¥Ü¥Ã¥¯¥¹¤ò¤¹¤Ù¤Æ¤Ï¤º¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"¤µ¤â¤Ê¤¤¤È¤³¤ÎÃæ¤Î°ì¤Ä¤·¤«¤¨¤é¤Ù¤Þ¤»¤ó\n"
-"\n"
-" - ¥¤¥ó¥¯¥ê¥á¥ó¥¿¥ë¥Ð¥Ã¥¯¥¢¥Ã¥×:\n"
-"\n"
-"\t¤³¤ì¤Ï¥Ð¥Ã¥¯¥¢¥Ã¥×ºÇ¶¯¤Î¥ª¥×¥·¥ç¥ó¤Ç¤¹¡£\n"
-"\tºÇ½é¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç¤ÏÁ´¥Ç¡¼¥¿¤¬¥Ð¥Ã¥¯¥¢¥Ã¥×¤µ¤ì¡¢\n"
-"\t¤½¤Î¸å¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç¤ÏÊѹ¹¤µ¤ì¤¿¤â¤Î¤À¤±¤¬\n"
-"\tÊݸ¤µ¤ì¤Þ¤¹¡£\n"
-"\t¤½¤·¤ÆÉü¸µ¤¹¤ë¤È¤­¤Ë¤Ï¡¢»ØÄêÆü»þ¤Î¥Ç¡¼¥¿¤¬Éü¸µ\n"
-"\t¤Ç¤­¤Þ¤¹¡£\n"
-"\t¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ð¤Ê¤¤¤È¡¢¸Å¤¤¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ï\n"
-"\tËè²óºï½ü¤µ¤ì¤Þ¤¹¡£    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" ¤³¤Î¥×¥í¥°¥é¥à¤Ï¥Õ¥ê¡¼¥½¥Õ¥È¥¦¥§¥¢¤Ç¤¹¡£Free Software Foundation¤Î\n"
-" ȯ¹Ô¤¹¤ë GNU °ìÈ̶¦Í­¥é¥¤¥»¥ó¥¹¤Î¥Ð¡¼¥¸¥ç¥ó2°Ê¹ß¤Î¾ò·ï¤Ë½¾¤Ã¤Æ\n"
-" ºÆÇÛÉÛ¡¦²þÊѤ¬¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-" ¤³¤Î¥×¥í¥°¥é¥à¤Ï¡¢Ìò¤ËΩ¤Ä¤Ù¤¯ÇÛÉÛ¤µ¤ì¤Æ¤Ï¤¤¤Þ¤¹¤¬¡¢\n"
-" ¤Þ¤Ã¤¿¤¯¤Î̵ÊݾڤǤ¹¡£¾¦¶ÈÀ­¤ä¡¢¤¢¤ëÌÜŪ¤Ø¤ÎŬ¹çÀ­¤Ë¤Ä¤¤¤Æ\n"
-" ÌÀ¼¨Åª¡¢°Å¼¨Åª¤òÌä¤ï¤º°ìÀÚ¤ÎÊݾڤò¹Ô¤¤¤Þ¤»¤ó¡£¾ÜºÙ¤Ï\n"
-" GNU °ìÈ̶¦Í­¥é¥¤¥»¥ó¥¹¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-" GNU °ìÈ̶¦Í­¥é¥¤¥»¥ó¥¹¤¬¤³¤Î¥×¥í¥°¥é¥à¤Ë¤ÏÉÕ°¤·¤Æ¤­¤¿¤Ï¤º\n"
-" ¤Ç¤¹¡£ÉÕ°¤·¤Æ¤¤¤Ê¤¤¾ì¹ç¤Ë¤Ï¡¢°Ê²¼¤ËÏ¢Íí¤·¤ÆÆþ¼ê¤·¤Æ¤¯¤À¤µ¤¤¡§\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, \n"
-" Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"ÀâÌÀ:\n"
-"\n"
-"  Drakbackup ¤Ï¥·¥¹¥Æ¥à¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ë»È¤¤¤Þ¤¹¡£\n"
-"  ÀßÄê¤Ë±þ¤¸¤Æ¡¢¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤¬Áª¤Ù¤Þ¤¹: \n"
-"\t- ¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë\n"
-"\t- ¥æ¡¼¥¶¥Õ¥¡¥¤¥ë\n"
-"\t- ¤½¤Î¾¥Õ¥¡¥¤¥ë\n"
-"\t¤¢¤ë¤¤¤ÏÁ´¥·¥¹¥Æ¥à¤ä¡¢¤½¤Î¾¥·¥¹¥Æ¥à¡Ê¥¦¥£¥ó¥É¥¦¥º\n"
-"\t¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ë¤â¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"  Drakbackup ¤Ç¤Ï¡¢°Ê²¼¤Î¥á¥Ç¥£¥¢¤Ë¥Ð¥Ã¥¯¥¢¥Ã¥×¤¬¤Ç¤­¤Þ¤¹:\n"
-"\t- ¥Ï¡¼¥É¥É¥é¥¤¥Ö.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (autoboot, ¥ì¥¹¥­¥å¡¼¡¢¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¤â²Ä).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- ¥Æ¡¼¥×\n"
-"\n"
-"  Drakbackup ¤Ç¤Ï¡¢Â¾¤Î¥Ç¥£¥ì¥¯¥È¥ê¤òÁª¤ó¤Ç¤½¤³¤Ë\n"
-"  ¥·¥¹¥Æ¥à¤òÉü¸µ¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"  ¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï¤¹¤Ù¤Æ¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ï\n"
-"  /var/lib/drakbackup ¥Ç¥£¥ì¥¯¥È¥ê¤ËÊݸ¤µ¤ì¤Þ¤¹¡£\n"
-"\n"
-"  ÀßÄê¥Õ¥¡¥¤¥ë:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Éü¸µ¤Î¤ä¤êÊý:\n"
-"  \n"
-"  Éü¸µ¥¹¥Æ¥Ã¥×¤Ç¤Ï DrakBackup ¤Ï¤â¤È¤Î¥Ç¥£¥ì¥¯¥È¥ê¤ò\n"
-"  ºï½ü¤·¤Æ¡¢¤¹¤Ù¤Æ¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤¬´°Á´¤«¤É¤¦¤«\n"
-"  ³Î¤«¤á¤Þ¤¹¡£Éü¸µ¤¹¤ëÁ°¤Ë¡¢¤½¤Î»þÅÀ¤Î¥·¥¹¥Æ¥à¤ò¥Ð¥Ã¥¯\n"
-"  ¥¢¥Ã¥×¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"¥ª¥×¥·¥ç¥óÀâÌÀ:\n"
-"\n"
-"ftp ¥Ð¥Ã¥¯¥¢¥Ã¥×¤ò»È¤¦¤È¤­¤ÏÃí°Õ¤·¤Þ¤·¤ç¤¦¡£¥µ¡¼¥Ð¤ËÁ÷¤é¤ì¤ë\n"
-"¤Î¤Ï¹½ÃۺѤߤΥХ寥¢¥Ã¥×¤À¤±¤Ç¤¹¡£¤·¤¿¤¬¤Ã¤Æ¡¢¥µ¡¼¥Ð¤ËÁ÷¤ë\n"
-"Á°¤Ë¡¢¤Þ¤º¥Ï¡¼¥É¥É¥é¥¤¥Ö¾å¤Ë¥Ð¥Ã¥¯¥¢¥Ã¥×¹½ÃÛ¤¬É¬Íפˤʤê¤Þ¤¹¡£\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"¥Ð¥Ã¥¯¥¢¥Ã¥×Éü¸µ¤ÎÌäÂê:\n"
-"\n"
-"Éü¸µ¥¹¥Æ¥Ã¥×Ãæ¤Ë¡¢Drakbackup ¤ÏÉü¸µ¤ËÀèΩ¤Ã¤Æ¤¹¤Ù¤Æ¤Î\n"
-"¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤ò¥Á¥§¥Ã¥¯¤·¤Þ¤¹¡£\n"
-"Éü¸µ¤ò»Ï¤á¤ëÁ°¤Ë¡¢Drakbackup ¤Ïº£¤Î¥Ç¥£¥ì¥¯¥È¥ê¤òºï½ü\n"
-"¤¹¤ë¤Î¤Ç¡¢¤¤¤Þ¤Î¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Þ¤¹¡£¤Ç¤¹¤«¤é¡¢¥Ð¥Ã¥¯\n"
-"¥¢¥Ã¥×¥Ç¡¼¥¿¤Î¥Õ¥¡¥¤¥ë¤Ï¼ê¤Ç²þÊѤ·¤Ê¤¤¤Û¤¦¤¬¸­ÌÀ¤Ç¤¹¡£\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"  Drakbackup ¤Ï¥·¥¹¥Æ¥à¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ë»È¤¤¤Þ¤¹¡£\n"
-"  ÀßÄê¤Ë±þ¤¸¤Æ¡¢¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤¬Áª¤Ù¤Þ¤¹: \n"
-"\t- ¥·¥¹¥Æ¥à¥Õ¥¡¥¤¥ë\n"
-"\t- ¥æ¡¼¥¶¥Õ¥¡¥¤¥ë\n"
-"\t- ¤½¤Î¾¥Õ¥¡¥¤¥ë\n"
-"\t¤¢¤ë¤¤¤ÏÁ´¥·¥¹¥Æ¥à¤ä¡¢¤½¤Î¾¥·¥¹¥Æ¥à¡Ê¥¦¥£¥ó¥É¥¦¥º\n"
-"\t¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ë¤â¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"  Drakbackup ¤Ç¤Ï¡¢°Ê²¼¤Î¥á¥Ç¥£¥¢¤Ë¥Ð¥Ã¥¯¥¢¥Ã¥×¤¬¤Ç¤­¤Þ¤¹:\n"
-"\t- ¥Ï¡¼¥É¥É¥é¥¤¥Ö.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (autoboot, ¥ì¥¹¥­¥å¡¼¡¢¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¤â²Ä).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- ¥Æ¡¼¥×\n"
-"\n"
-"  Drakbackup ¤Ç¤Ï¡¢Â¾¤Î¥Ç¥£¥ì¥¯¥È¥ê¤òÁª¤ó¤Ç¤½¤³¤Ë\n"
-"  ¥·¥¹¥Æ¥à¤òÉü¸µ¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-"  ¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï¤¹¤Ù¤Æ¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¤Ï\n"
-"  /var/lib/drakbackup ¥Ç¥£¥ì¥¯¥È¥ê¤ËÊݸ¤µ¤ì¤Þ¤¹¡£\n"
-"\n"
-"  ÀßÄê¥Õ¥¡¥¤¥ë:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Éü¸µ¤Î¤ä¤êÊý:\n"
-"  \n"
-"  Éü¸µ¥¹¥Æ¥Ã¥×¤Ç¤Ï DrakBackup ¤Ï¤â¤È¤Î¥Ç¥£¥ì¥¯¥È¥ê¤ò\n"
-"  ºï½ü¤·¤Æ¡¢¤¹¤Ù¤Æ¤Î¥Ð¥Ã¥¯¥¢¥Ã¥×¥Õ¥¡¥¤¥ë¤¬´°Á´¤«¤É¤¦¤«\n"
-"  ³Î¤«¤á¤Þ¤¹¡£Éü¸µ¤¹¤ëÁ°¤Ë¡¢¤½¤Î»þÅÀ¤Î¥·¥¹¥Æ¥à¤ò¥Ð¥Ã¥¯\n"
-"  ¥¢¥Ã¥×¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¼ºÇÔ¤·¤Þ¤·¤¿¡£°Ê²¼¤Î¥¨¥é¡¼¤¬È¯À¸:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¥Õ¥©¥ó¥È¤ò¸¡º÷"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¥Õ¥©¥ó¥È¤òÁªÂò¤·¤Ê¤¤"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "¤¹¤Ù¤Æ¤Î¥Õ¥©¥ó¥È¤ò¥Á¥§¥Ã¥¯"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "¥Õ¥©¥ó¥È¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "´°Î»"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "¥Þ¥¦¥ó¥È¤µ¤ì¤¿¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¤Ï¥Õ¥©¥ó¥È¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Àµ¤·¤¤¥Õ¥©¥ó¥È¤òÁª¤Óľ¤¹"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "¥Õ¥©¥ó¥È¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß°ìÍ÷¤«¤é¥Õ¥©¥ó¥È¤òõ¤¹"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "¥Õ¥©¥ó¥È¤ò¥³¥Ô¡¼"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type ¥Õ¥©¥ó¥È¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "ttmkfdir Ãæ¤Ê¤Î¤Ç¾¯¡¹¤ªÂÔ¤Á¤ò..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type ¥¤¥ó¥¹¥È¡¼¥ë´°Î»"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "¥Õ¥©¥ó¥ÈÊÑ´¹"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst ¹½ÃÛÃæ"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript »²¾ÈÃæ"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf ¥Õ¥©¥ó¥ÈÊÑ´¹"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm ¥Õ¥©¥ó¥ÈÊÑ´¹"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "°ì»þ¥Õ¥¡¥¤¥ë¤òºî¤é¤Ê¤¤"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "XFS ºÆµ¯Æ°"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "¥Õ¥©¥ó¥È¥Õ¥¡¥¤¥ë¤òºî¤é¤Ê¤¤"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs ºÆµ¯Æ°"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"¥Õ¥©¥ó¥È¥¤¥ó¥¹¥È¡¼¥ë¤ËÀèΩ¤Ã¤Æ¡¢¤½¤ì¤é¤Î¥Õ¥©¥ó¥È¤ò»È¤¦¸¢Íø¤ä¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë"
-"¸¢Íø¤¬¤¢¤ë¤³¤È¤ò³Îǧ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"\n"
-"-¥Õ¥©¥ó¥È¤òÄ̾ï¤Î¤ä¤êÊý¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤¹¡£¤È¤­¤É¤­¡¢¤ª¤«¤·¤Ê¥Õ¥©¥ó¥È¤Ç "
-"X ¥µ¡¼¥Ð¤¬¥Ï¥ó¥°¤¹¤ë¾ì¹ç¤¬¤¢¤ê¤Þ¤¹¡£"
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "¥Õ¥©¥ó¥ÈÆɤ߹þ¤ß"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "¥¦¥£¥ó¥É¥¦¥º¤Î¥Õ¥©¥ó¥È¤ò¼è¤Ã¤Æ¤¯¤ë"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "¥Õ¥©¥ó¥È¤Î¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "¾åµé¥ª¥×¥·¥ç¥ó"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "¥Õ¥©¥ó¥È°ìÍ÷"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "¤³¤Î¥Õ¥©¥ó¥È¤ò¥µ¥Ý¡¼¥È¤¹¤ë¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "°ìÈÌ¥×¥ê¥ó¥¿"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "¥Õ¥©¥ó¥È¥Õ¥¡¥¤¥ë¤«¥Ç¥£¥ì¥¯¥È¥ê¤òÁª¤ó¤Ç¡ÖÄɲáפò¥¯¥ê¥Ã¥¯"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "°ìÍ÷¤Î¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "¤Þ¤Á¤¬¤¤¤Ê¤±¤ì¤Ð¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "¥À¥á¤Ê¤é¤³¤Á¤é¤ò"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "¤¹¤Ù¤Æ¤òÈóÁªÂò¤Ë"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "¤¹¤Ù¤Æ¤òÁªÂò"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "°ìÍ÷¤òºï½ü"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "¥¤¥Ë¥·¥ã¥ë¥Æ¥¹¥È"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "¥·¥¹¥Æ¥à¾å¤Î¥Õ¥©¥ó¥È¤ò¥³¥Ô¡¼"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "¥Õ¥©¥ó¥È¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÈÊÑ´¹"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "¥¤¥ó¥¹¥È¡¼¥ë¸å¤Îºî¶È"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "¥·¥¹¥Æ¥à¤«¤é¥Õ¥©¥ó¥È¤òºï½ü"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë¸å¤Îºî¶È"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Î¶¦Í­"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Ï¸½ºßÍ­¸ú"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Î¥»¥Ã¥È¥¢¥Ã¥×¤Ï¤¹¤Ç¤Ë´°Î»¡£\n"
-"Í­¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-"¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "̵¸ú¤Ë"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "̵»ë"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ºÆÀßÄê"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "¥µ¡¼¥Ð¤ò̵¸ú¤Ë¤·¤Æ¤¤¤Þ¤¹¡Ä¡Ä"
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Ï̵¸ú¤Ë¤Ê¤ê¤Þ¤·¤¿¡£"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Ï¸½ºß̵¸ú¤Ç¤¹"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Î¥»¥Ã¥È¥¢¥Ã¥×¤Ï¤¹¤Ç¤Ë´°Î»¡£\n"
-"̵¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-"\n"
-"¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "Í­¸ú¤Ë"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "¥µ¡¼¥Ð¤òÍ­¸ú¤Ë¤·¤Æ¤¤¤Þ¤¹¡Ä¡Ä"
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤¬Í­¸ú¤Ç¤¹¡£"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Î¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ò¶¦Í­¤¹¤ë¤è¤¦¤ËÀßÄꤷ¤Þ¤¹¡£\n"
-"¤³¤Îµ¡Ç½¤¬¤¢¤ë¤È¡¢¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¾¤Î¥³¥ó¥Ô¥å¡¼¥¿¤¬¡¢\n"
-"¤³¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Î¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ò»È¤¨¤Þ¤¹¡£\n"
-"Ãí¡§¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯ (LAN) ¤ò¤Ä¤¯¤ë¤Ë¤Ï¡¢ÀìÍѤΥͥåȥ¥¯¥¢¥À¥×¥¿"
-"¤¬Íפê¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ %s (¥â¥¸¥å¡¼¥ë %s ¤ò»ÈÍÑ)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"¥·¥¹¥Æ¥à¾å¤Ë¥¤¡¼¥µ¥Í¥Ã¥È¥¢¥À¥×¥¿¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£ ¥Ï¡¼¥É¥¦¥§¥¢ÀßÄê¥Ä¡¼¥ë¤ò¼Â"
-"¹Ô¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¿¡¼¥Õ¥§¥¤¥¹"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"¥·¥¹¥Æ¥à¤Ë¤ÏÀßÄꤵ¤ì¤¿¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤¬¤Ò¤È¤Ä¤·¤«¤¢¤ê¤Þ¤»¤ó¡§\n"
-"\n"
-"%s\n"
-"\n"
-"¤³¤Î¥¢¥À¥×¥¿¤Ç LAN ¤ËÀܳ¤·¤Þ¤¹¤Í¡£"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯¤Ë¤Ä¤Ê¤¬¤ë¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤ò\n"
-"Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤ÏÀßÄêºÑ¤ß¤Ç¤¹ÀßÄꤵ¤ì¤Æ¤Þ¤»¤ó"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"·Ù¹ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿ (%s) ¤ÏÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-"\n"
-"¼«Æ°ºÆÀßÄê¤ò¤·¤Þ¤¹¤«¡©\n"
-"\n"
-"¼êÆ°¤Ç¤ä¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¤¬¡¢¤½¤ì¤Ê¤ê¤ÎÃ챤¬É¬ÍפǤ¹¤è¡£"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "¼«Æ°ºÆÀßÄê"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "¸½ºß¤Î¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹ÀßÄê¤òɽ¼¨"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"C¡Ö%s¡×¤Î¸½¾õ¤ÎÀßÄê:\n"
-"\n"
-"¥Í¥Ã¥È¥ï¡¼¥¯: %s\n"
-"IP ¥¢¥É¥ì¥¹: %s\n"
-"IP °À­: %s\n"
-"¥É¥é¥¤¥Ð: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"¸½¾õ¤ÎÀßÄê¤ò°Ý»ý¤·¤Æ¡¢¤¹¤Ç¤Ë DHCP ¥µ¡¼¥Ð¤òÀßÃÖ¤·¤¿¤â¤Î¤ÈÁÛÄꤹ¤ë¤³¤È¤â¤Ç¤­¤Þ"
-"¤¹¡£¤½¤Î¾ì¹ç¤Ë¤Ï¡¢¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¤ÎC¥¯¥é¥¹¥¢¥É¥ì¥¹¤òÀµ¤·¤¯Æɤó¤Ç¤¤¤ë¤«³Î"
-"ǧ¤·¤Æ¤¯¤À¤µ¤¤¡£¼«Æ°ÀßÄê¤Ï¤·¤Þ¤»¤ó¤·¡¢DHCP ¥µ¡¼¥Ð¤ÎÀßÄê¤âÊѤ¨¤Þ¤»¤ó¤Î¤Ç¡£\n"
-"\n"
-"¤¢¤ë¤¤¤Ï¡¢¤³¤Á¤é¤Ç¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤ÈDHCP¥µ¡¼¥Ð¤ÎÀßÄê¤ò¤ä¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C¥¯¥é¥¹¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "¡Ê¤³¤Î¡ËDHCP ¥µ¡¼¥Ð¤Î IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤ÈDHCP¥µ¡¼¥Ð¤ÎºÆÀßÄê"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¤¬¡Ö.0¡×¤Ç½ª¤ï¤Ã¤Æ¤¤¤Þ¤»¤ó¡£ÃæÃǤ·¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "¸½ºß¤Î %s ¤ÎÀßÄê¤Ç¤ÏLAN¥¢¥É¥ì¥¹¤¬¾×Æͤ¹¤ë¤«¤â¤·¤ì¤Þ¤»¤ó¡ª\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "¥Õ¥¡¥¤¥¢¥¦¥©¡¼¥ë¤ÎÀßÄê¤ò¸¡½Ð¡ª"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"·Ù¹ð¡ª´û¸¥Õ¥¡¥¤¥ä¥¦¥©¡¼¥ë¤ÎÀßÄê¤ò¸¡½Ð¡£\n"
-"¥¤¥ó¥¹¥È¡¼¥ë¸å¤Ë¡¢¼êÆ°¤Ç½¤Àµ¤¬Íפ뤫ð⤷¤ì¤Þ¤»¤ó¡£"
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "ÀßÄêÃæ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "¥¹¥¯¥ê¥×¥È¤ÎÀßÄê¡¢¥½¥Õ¥È¥¦¥§¥¢¤Î¥¤¥ó¥¹¥È¡¼¥ë¡¢¥µ¡¼¥Ð¤Îµ¯Æ°..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸ %s ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÇÌäÂêȯÀ¸"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"ÀßÄ꤬¤¹¤Ù¤Æ½ª¤ï¤ê¤Þ¤·¤¿¡£\n"
-"¤³¤ì¤Ç¼«Æ°¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¡Êdhcp) ¤ò»È¤Ã¤Æ¡¢LAN ¾å¤Î¾¤Î¥Þ¥·¥ó¤È¥¤¥ó¥¿¡¼¥Í¥Ã"
-"¥ÈÀܳ¤ò¶¦Í­¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "ÀßÄê¤Ï¤¹¤ó¤Ç¤¤¤Þ¤¹¤¬¡¢¤¤¤Þ¤Ï̵¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "ÀßÄê¤Ï¤¹¤ó¤Ç¤¤¤Æ¡¢¤¤¤Þ¤ÏÍ­¸ú¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¤Ï¤Þ¤Ã¤¿¤¯ÀßÄꤵ¤ì¤Æ¤¤¤Þ¤»¤ó¡£"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÎÀßÄê"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤Ø¤è¤¦¤³¤½¡ª\n"
-"\n"
-"%s\n"
-"\n"
-"ÀßÄꥦ¥£¥¶¡¼¥É¤òµ¯Æ°¤¹¤ë¤Ë¤Ï¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê (%d ¥¢¥À¥×¥¿)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "¥×¥í¥Õ¥£¡¼¥ë: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "¥×¥í¥Õ¥£¡¼¥ëºï½ü¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "ºï½ü¤·¤¿¤¤¥×¥í¥Õ¥£¡¼¥ë¡§"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "¿·µ¬¥×¥í¥Õ¥£¡¼¥ë¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "ºîÀ®¤¹¤ë¥×¥í¥Õ¥£¡¼¥ë¤Î̾Á°¡Ê¿·¥×¥í¥Õ¥¡¥¤¥ë¤Ï¸½ºß¤Î¤â¤Î¤Î¥³¥Ô¡¼¤Ç¤¹¡Ë¡§"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "¥Û¥¹¥È̾:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "¥¿¥¤¥×: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "¥²¡¼¥È¥¦¥§¥¤:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "¥¹¥Æ¡¼¥¿¥¹: "
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "¾¯¡¹¤ªÂÔ¤Á¤ò"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥¢¥¯¥»¥¹¤ÎÀßÄê"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN¤ÎÀßÄê"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "¥É¥é¥¤¥Ð"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "¥×¥í¥È¥³¥ë"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "¾õÂÖ"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "LAN ÀßÄê¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "¥¦¥£¥¶¡¼¥É¤Îµ¯Æ°¤Ë¤Ï¤³¤Á¤é¤ò¥¯¥ê¥Ã¥¯ -->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "¥¦¥£¥¶¡¼¥É..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "ŬÍÑ"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "¾¯¡¹¤ªÂÔ¤Á¤ò¡Ä¡ÄÀßÄê¤òŬÍѤ·¤Æ¤¤¤Þ¤¹"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Àܳ´°Î»"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Àܳ¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Àܳ¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Àܳ¤òÀÚÃÇ¡Ä¡Ä"
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"·Ù¹ð¡¢Ê̤Υ¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¬¸¡½Ð¤µ¤ì¤Þ¤·¤¿¡£¥Í¥Ã¥È¥ï¡¼¥¯¤Ï»ÈÍÑÃ椫¤â¤·¤ì¤Þ"
-"¤»¤ó"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"ÀßÄêºÑ¤ß¤Î¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤¬¤¢¤ê¤Þ¤»¤ó¡£\n"
-"¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤Þ¤º¤½¤ì¤é¤òÀßÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN¤ÎÀßÄê"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "¥¢¥À¥×¥¿ %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "¥Ö¡¼¥È¥×¥í¥È¥³¥ë"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "µ¯Æ°»þ¤Ë³«»Ï"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP ¥¯¥é¥¤¥¢¥ó¥È"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "¤¤¤Þ¤¹¤°Í­¸ú¤Ë"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "¤¤¤Þ¤¹¤°Ìµ¸ú¤Ë"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"¤³¤Î¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤Ï¤Þ¤ÀÀßÄꤵ¤ì¤Æ¤¤¤Þ¤»¤ó¡£\n"
-"¼ç¥¦¥£¥ó¥É¥¦¤ÇÀßÄꥦ¥£¥¶¡¼¥É¤òµ¯Æ°¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¬¤¢¤ê¤Þ¤»¤ó¡£\n"
-"¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤ÆºîÀ®¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÀßÄê"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÀßÄê"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Àܳ¤Î¼ïÎà: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "¥Ñ¥é¥á¡¼¥¿"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "¥²¡¼¥È¥¦¥§¥¤"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "¥¤¡¼¥µ¥Í¥Ã¥È¥«¡¼¥É"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP ¥¯¥é¥¤¥¢¥ó¥È"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤ÎÀßÄêÃæ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "»ÈÍѤ¹¤ë¥Ä¡¼¥ë¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "¥«¥Ê¥À¡Ê¥±¡¼¥Ö¥ë¡Ë"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (¥±¡¼¥Ö¥ë)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (¥±¡¼¥Ö¥ë-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Ãæ¹ñ (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "ÆüËÜ (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "ÆüËÜ (¥±¡¼¥Ö¥ë)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Åì¥è¡¼¥í¥Ã¥Ñ"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "¥¢¥¤¥ë¥é¥ó¥É"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "À¾¥è¡¼¥í¥Ã¥Ñ"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "¥ª¡¼¥¹¥È¥é¥ê¥¢"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "¥Ë¥å¡¼¥¸¡¼¥é¥ó¥É"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Æ¥Õ¥ê¥«"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "¥¢¥ë¥¼¥ó¥Á¥ó"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"¤Ç¤Ï\n"
-"¥Æ¥ì¥ÓÊý¼°¤È¹ñ¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "¥Æ¥ì¥ÓÊý¼°¡§"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Ãϰ衧"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "¥Æ¥ì¥Ó¥Á¥ã¥ó¥Í¥ë¤òõ¤·¤Æ¤¤¤Þ¤¹..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "¥Æ¥ì¥Ó¥Á¥ã¥ó¥Í¥ë¤òõ¤·¤Æ¤¤¤Þ¤¹"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "»È¤¤Êý: keyboarddrake [--expert] [¥­¡¼¥Ü¡¼¥É]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È¤Ï²¿¤Ç¤¹¤«¡©"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "BackSpace¥­¡¼¤¬¥³¥ó¥½¡¼¥ë¤Ç¾Ãµî¤ò¤¹¤ë¤è¤¦¤Ë¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "CD-ROM¤òÆþ¤ìÂؤ¨¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"¥¤¥ó¥¹¥È¡¼¥ëCD ¤ò¥É¥é¥¤¥Ö¤Ë¤¤¤ì¤Æ¡¢ Ok ¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"CD¤¬¤Ê¤±¤ì¤Ð¡¢Cancel ¤ò²¡¤·¤Æ¥é¥¤¥Ö¥¢¥Ã¥×¥°¥ì¡¼¥É¤ò²óÈò¤·¤Æ²¼¤µ¤¤¡£"
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "¥é¥¤¥Ö¥¢¥Ã¥×¥°¥ì¡¼¥É¤ò³«»Ï¤Ç¤­¤Þ¤»¤ó!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Êѹ¹¤¬´°Î»¤·¤Þ¤·¤¿¤¬¡¢Í­¸ú¤Ë¤¹¤ë¤Ë¤Ï¤¤¤Ã¤¿¤ó¥í¥°¥¢¥¦¥È¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Áª¤ó¤ÀÆü¤Îʬ¤À¤±¤òɽ¼¨"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/¥Õ¥¡¥¤¥ë(F)/¿·µ¬(N)"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/¥Õ¥¡¥¤¥ë(F)/³«¤¯(O)"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/¥Õ¥¡¥¤¥ë(F)/Êݸ(S)"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/¥Õ¥¡¥¤¥ë(F)/Ê̤Î̾Á°¤ÇÊݸ(A)"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/¥Õ¥¡¥¤¥ë(F)/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/¥ª¥×¥·¥ç¥ó(_O)"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/¥ª¥×¥·¥ç¥ó(O)/¥Æ¥¹¥È"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/¥Ø¥ë¥×(_H)"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/¥Ø¥ë¥×(H)/¤³¤Î¥½¥Õ¥È¤Ë¤Ä¤¤¤Æ(A)"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-"-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-iso8859-1,-*-fixed-medium-r-normal--"
-"24-*-100-100-c-*-jisx0208.1983-0,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-"-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-iso8859-1,-*-fixed-medium-r-normal--"
-"24-*-100-100-c-*-jisx0208.1983-0,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "¥æ¡¼¥¶Ì¾"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "¥á¥Ã¥»¡¼¥¸"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "¥·¥¹¥í¥°"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake ¥Ä¡¼¥ë¤ÎÀâÌÀ"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "¸¡º÷"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "¥í¥°¤ò¥â¥Ë¥¿¤¹¤ë¤¿¤á¤Î¥Ä¡¼¥ë"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "ÀßÄê"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "°ìÃפ¹¤ë¤â¤Î"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "°Ê²¼¤Ë¤Ï°ìÃפ·¤Ê¤¤"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "¥Õ¥¡¥¤¥ë¤òÁªÂò"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "¥«¥ì¥ó¥À"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "¥Õ¥¡¥¤¥ë¤ÎÆâÍÆ"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Mail/SMS ·Ù¹ð"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "¾¯¡¹¤ªÂÔ¤Á¤ò¡¢¥Õ¥¡¥¤¥ë %s ¤òõ¤·¤Æ¤¤¤Þ¤¹¡£"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Mail/SMS ·Ù¹ð¤ÎÀßÄê"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Mail/SMS ÀßÄê¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤Ø¤¤¤é¤Ã¤·¤ã¤¤¤Þ¤»¡Á¡£\n"
-"\n"
-"¤³¤³¤Ç¤Ï·Ù¹ð¥·¥¹¥Æ¥à¤òÀßÄꤷ¤Þ¤¹¡£\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "¥µ¡¼¥Ó¥¹ÀßÄê"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "°Ê²¼¤ÇÁª¤ó¤À¥µ¡¼¥Ó¥¹¤¬»ß¤Þ¤Ã¤¿¤é·ÙÊ󤬽Фޤ¹¡£"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "ÀßÄê¤ÎÆɤ߹þ¤ßÃæ"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Éé²Ù¤¬¤³¤ÎÃͤò¾å²ó¤Ã¤¿¤é·ÙÊ󤬽Фޤ¹"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "·Ù¹ð¤ÎÀßÄê"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "¥·¥¹¥Æ¥à¤Î·Ù¹ðÊýË¡¤òÀßÄê"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "̾Á°¤ò¤Ä¤±¤ÆÊݸ..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "¥Þ¥¦¥¹¤Î·¿¤Ï¤Ê¤ó¤Ç¤¹¤«¡©"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "¿¿Ãæ¥Ü¥¿¥ó¤ò¥¨¥ß¥å¥ì¡¼¥È¤·¤Þ¤¹¤«¡©"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s ¤¬ %s ¤Ç¸«¤Ä¤«¤ê¤Þ¤·¤¿¡£ÀßÄꤷ¤Þ¤¹¤«?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "¥¹¥­¥ã¥Ê¤òÁªÂò¤·¤Æ²¼¤µ¤¤"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "¤³¤Î %s ¥¹¥­¥ã¥Ê¤Ï¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "¥Ö¡¼¥È¥Ç¥Ð¥¤¥¹"
-
-#: ../../standalone/scannerdrake_.c:102
-#, fuzzy, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"printerdrake ¤Îµ¯Æ°¤Ï¡¢Mandrake ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼¤Î¥Ï¡¼¥É¥¦¥§¥¢¤Î¹à¤Ç¹Ô¤Ã"
-"¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "¥Õ¥¡¥¤¥¢¥¦¥©¡¼¥ë¤ÎÀßÄê"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "¥Õ¥¡¥¤¥¢¥¦¥©¡¼¥ë¤ÎÀßÄê"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë\n"
-"\n"
-"¤¹¤Ç¤Ë¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤ÏÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-"¤½¤ì¤òÊѹ¹¡¦ºï½ü¤¹¤ë¤Ë¤Ï¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë\n"
-"\n"
-"¡ÖÀßÄê¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Æɸ½à¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤òÀßÄꤷ¤Þ¤¹"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "¸À¸ì¤ÎÁªÂò"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "ƳÆþ¥¯¥é¥¹¤ÎÁªÂò"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "¥Ç¥£¥¹¥¯¤Î¸¡½Ð"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "¥Þ¥¦¥¹¤ÎÀßÄê"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "¥­¡¼¥Ü¡¼¥É¤ÎÁªÂò"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "¥»¥­¥å¥ê¥Æ¥£"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "¥Ñ¥Ã¥±¡¼¥¸¤ÎÁªÂò"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "¥·¥¹¥Æ¥à¤ÎƳÆþ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "¥æ¡¼¥¶¤ÎÅÐÏ¿"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "¥µ¡¼¥Ó¥¹¤ÎÀßÄê"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "¥Ö¡¼¥È¥í¡¼¥ÀÀßÄê"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "µ¯Æ°¥Ç¥£¥¹¥¯ºîÀ®"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X ¤ÎÀßÄê"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "¥·¥¹¥Æ¥à¹¹¿·¤ò¥¤¥ó¥¹¥È¡¼¥ë"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "ƳÆþºî¶È¤ò½ªÎ»"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"¥ß¥Ë¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ëÀßÄê\n"
-"\n"
-"¤³¤Î Mandrake Linux ¥Þ¥·¥óÍѤθĿÍÍÑ¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ëÀßÄê¤ò¤·¤Þ¤¹¡£\n"
-"¶¯ÎϤÊÀìÍÑ¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¸þ¤±¤Ë¤Ï¡¢ÀìÍѤΠMandrakeSecurity\n"
-"¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¥Ñ¥Ã¥±¡¼¥¸¤ò¸¡Æ¤¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"¤µ¤Æ¡¢¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤·¤¿¤¤¥µ¡¼¥Ó¥¹¤Ë¤Ä¤¤¤Æ¤¤¤í¤¤¤í¤ª¿Ò¤Í¤·¤Þ¤¹¡£\n"
-"Åú¤¨¤ë¤È¤­¤Ë¤Ï¤è¤¯¹Í¤¨¤Æ¤¯¤À¤µ¤¤¡£¤¢¤Ê¤¿¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Î¥»¥­¥å¥ê¥Æ¥£\n"
-"¤Ë´Ø¤ï¤ëÌäÂê¤Ç¤¹¤«¤é¡£\n"
-"\n"
-"¤³¤¦¤·¤¿¥µ¡¼¥Ó¥¹¤Ç¡¢¤¤¤Þ¼«Ê¬¤Ç»È¤Ã¤Æ¤¤¤Ê¤¤¤â¤Î¤Ï¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë\n"
-"¤Ç±£¤·¤Æ¤·¤Þ¤¤¤Þ¤·¤ç¤¦¡£¤³¤Î¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤ò¼Â¹Ô¤¹¤ì¤Ð¡¢ÀßÄê¤Ï\n"
-"¤¤¤Ä¤Ç¤âÊѹ¹¤Ç¤­¤Þ¤¹¡£"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Ç¡¢Á´¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤é¸«¤¨¤ë¥¦¥§¥Ö¥µ¡¼¥Ð¤ò¼Â¹Ô¤·¤Þ¤¹¤«¡©\n"
-"¼«Ê¬¤Î¥Þ¥·¥ó¤À¤±¤Ç»È¤¦¥¦¥§¥Ö¥µ¡¼¥Ð¤·¤«¤Ê¤¤¤Ê¤é¡¢¤³¤³¤Ç¡Ö¤¤¤¤¤¨¡×¤È\n"
-"Åú¤¨¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"¤³¤Î¥Þ¥·¥ó¤Ç¥Í¡¼¥à¥µ¡¼¥Ð¡ÊDNS) ¤ò¼Â¹Ô¤·¤Þ¤¹¤«¡©¡¡Á´¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ë\n"
-"IP ¤ä¥¾¡¼¥ó¾ðÊó¤ò¸ø³«¤¹¤ë¤è¤¦ÀßÄꤷ¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢¡Ö¤¤¤¤¤¨¡×¤ÈÅú¤¨¤Æ\n"
-"¤¯¤À¤µ¤¤¡£\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"³°¤«¤é¤Î Secure Shell (ssh) Àܳ¤òµö²Ä¤·¤Þ¤¹¤«¡©¡¡ssh¤Ï\n"
-"telnet¤ËÂå¤ï¤ë¤â¤Î¤Ç¡¢¥í¥°¥¤¥ó¤Ë»È¤¨¤Þ¤¹¡£¤¤¤Þ telnet ¤ò»È¤Ã¤Æ¤¤¤¿¤é\n"
-"ÀäÂÐ¤Ë ssh ¤ËÀÚ¤êÂؤ¨¤Þ¤·¤ç¤¦¡£telnet ¤Ï°Å¹æ²½¤µ¤ì¤Æ¤¤¤Þ¤»¤ó¡£¤À¤«¤é\n"
-"¥Ñ¥¹¥ï¡¼¥É¤òÅð¤Þ¤ì¤ë´í¸±¤¬¤¢¤ê¤Þ¤¹¡£ssh¤Ï°Å¹æ²½¤µ¤ì¤Æ¤¤¤ë¤Î¤Ç¡¢¤³¤¦\n"
-"¤¤¤Ã¤¿Åð¤ßÄ°¤­¤¬¤Ç¤­¤Þ¤»¤ó"
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"³°¤«¤é¤Î telnet Àܳ¤òµö²Ä¤·¤Þ¤¹¤«¡©\n"
-"¤µ¤Ã¤­ÀâÌÀ¤·¤¿¤È¤ª¤ê¡¢¤³¤ì¤Ï¤È¤ó¤Ç¤â¤Ê¤¯´í¸±¤Ê¤³¤È¤Ç¤¹¡£¤³¤³¤Ç¤Ï\n"
-"ÀäÂФˡ֤¤¤¤¤¨¡×¤ÈÅú¤¨¤Æ¡¢ssh ¤ò»È¤¦¤è¤¦¤Ë¤ª´«¤á¤·¤Þ¤¹¡£\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ç¥¢¥¯¥»¥¹¤Ç¤­¤ë FTP ¥µ¡¼¥Ð¤ò¼Â¹Ô¤·¤Þ¤¹¤«¡©\n"
-"¤â¤·¤½¤¦¤Ê¤é¡¢¤Ê¤ë¤Ù¤¯ Anonymous žÁ÷¤Ë¤À¤±»È¤¦¤è¤¦¤ª´«¤á¤·¤Þ¤¹¡£\n"
-"FTP ¤ÇÁ÷¿®¤¹¤ë¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢¤¹¤Ù¤ÆÅðÄ°¤Ç¤­¤Þ¤¹¡£FTP ¤Ï¥Ñ¥¹¥ï¡¼¥ÉÁ÷¿®¤Ë\n"
-"°Å¹æ¤ò»È¤ï¤Ê¤¤¤«¤é¤Ç¤¹¡£\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"¥á¡¼¥ë¥µ¡¼¥Ð¤ò¼Â¹Ô¤·¤Þ¤¹¤«¡©¡¡¥á¡¼¥ë¤ÎÁ÷¿®¤Ë pine¡¢mutt¤Ê¤É¤Î\n"
-"¥Æ¥­¥¹¥È¥Ù¡¼¥¹¤Î¥á¡¼¥ë¥¯¥é¥¤¥¢¥ó¥È¤ò»È¤¦¿Í¤Ï¡¢¤¿¤Ö¤ó¥á¡¼¥ë¥µ¡¼¥Ð\n"
-"¤¬É¬ÍפǤ¹¡£¤µ¤â¤Ê¤±¤ì¤Ð¡¢¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤Ç±£¤·¤Þ¤·¤ç¤¦¡£\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP ¥µ¡¼¥Ð¤« IMAP ¥µ¡¼¥Ð¤Ï»È¤¤¤Þ¤¹¤«¡©\n"
-"¤³¤Î¥Þ¥·¥ó·Ðͳ¤Ç¡¢web¥á¡¼¥ë°Ê³°¤Î¥á¡¼¥ë¥¢¥«¥¦¥ó¥È¤òÀßÄꤹ¤ë\n"
-"¤Ê¤éɬÍפǤ¹¡£\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"2.2 ¥«¡¼¥Í¥ë¤ò»È¤Ã¤Æ¤¤¤Þ¤¹¤Í¡£¤â¤·¥Í¥Ã¥È¥ï¡¼¥¯ IP ¤¬\n"
-"²ÈÄí¤ä¥ª¥Õ¥£¥¹¤Ç¼«Æ°³ä¤êÅö¤Æ¤Ë¤Ê¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢¤½¤ì¤Ë\n"
-"±þ¤¸¤¿ÀßÄê¤ò¤·¤Þ¤¹¡£¼«Æ°³ä¤êÅö¤Æ¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¤«¡©\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"¤¢¤Ê¤¿¤Î¥³¥ó¥Ô¥å¡¼¥¿¤Ï¡¢¤Û¤«¤Î¥³¥ó¥Ô¥å¡¼¥¿¤È»þ·×¤¢¤ï¤»¤ò¤·¤Æ\n"
-"¤¤¤Þ¤¹¤«¡©¡¡¤³¤ì¤Ï¤Õ¤Ä¤¦¡¢Ã浬ÌϤ«¤éÂ絬ÌϤΠLinux/Unix ÁÈ¿¥\n"
-"¤Ç¡¢¥í¥°¥¤¥ó¤Ê¤É¤ÎƱ´ü¤ò¤È¤ë¤Î¤Ë»È¤ï¤ì¤Þ¤¹¡£¤½¤¦¤¤¤¦Â礭¤Ê\n"
-"ÁÈ¿¥¤Î°ìÉô¤Ç¤Ï¤Ê¤¯¡¢»þ·×¤¢¤ï¤»¤Ê¤ó¤«Ä°¤¤¤¿¤³¤È¤¬¤Ê¤±¤ì¤Ð¡¢\n"
-"¤¿¤Ö¤óÉÔÍפǤ¹"
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"ÀßÄ괰λ¡£Êѹ¹¤ò¥Ç¥£¥¹¥¯¤Ë½ñ¤­¹þ¤ß¤Þ¤¹¤«¡©\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s ¤¬³«¤±¤Þ¤»¤ó: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "½ñ¤­¹þ¤ßÍÑ¤Ë %s ¤¬³«¤±¤Þ¤»¤ó: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "DHCP ¤Ï»È¤ï¤Ê¤¤"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "DHCP ¤ò»È¤¦"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "NTP ¤Ï¤¤¤é¤Ê¤¤"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "NTP¤ò»È¤¦"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Êݸ¤·¤Ê¤¤"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Êݸ¤·¤Æ½ªÎ»"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ëÀßÄꥦ¥£¥¶¡¼¥É"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "¤¤¤¤¤¨¡Ê¤³¤ì¤ò¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤éËɸæ¡Ë"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "¤Ï¤¤¡Ê¥Õ¥¡¥¤¥¢¡¼¥¦¥©¡¼¥ë¤òÄ̤¹¡Ë"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "¾¯¡¹¤ªÂÔ¤Á¤ò...¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¥Ð¥Ã¥±¡¼¥¸¤ò³ÎǧÃæ"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"ɬÍץѥ屡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¼ºÇÔ¤·¤Þ¤·¤¿ : %s ¤È Bastille.\n"
-"¼êÆ°¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "¥µ¡¼¥Ð¡¢Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥³¥ó¥Ô¥å¡¼¥¿ (¥¯¥é¥¤¥¢¥ó¥È)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ¥µ¡¼¥Ð, SMB ¥µ¡¼¥Ð, Proxy ¥µ¡¼¥Ð, SSH ¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "¥ª¥Õ¥£¥¹´ØÏ¢"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot ¤ä VisorÍѥġ¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "¥µ¡¼¥Ð¡¢¥Õ¥¡¥¤¥¢¥¦¥©¡¼¥ë/¥ë¡¼¥¿"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "¥É¥á¥¤¥ó̾¥µ¡¼¥Ð (DNS) ¤È¥Í¥Ã¥È¥ï¡¼¥¯¾ðÊ󥵡¼¥Ð¡ÊNIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"¥ª¥Õ¥£¥¹·Ï¥½¥Õ¥È: ¥ï¡¼¥×¥í (kword, abiword), ɽ·×»» (kspread, gnumeric), pdf"
-"¥Ó¥å¡¼¥¢¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "¥ª¡¼¥Ç¥£¥ª´ØÏ¢¥Ä¡¼¥ë¡§mp3, midi, ¥ß¥­¥µ¡¼¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linux ¤ä¥Õ¥ê¡¼¥½¥Õ¥È´ØÏ¢¤ÎËܤä¥Ï¥¦¥Ä¡¼Ê¸½ñ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡§¥Ó¥Ç¥ª"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "¥á¡¼¥ë¡¢¥Ë¥å¡¼¥¹¡¢web, ¥Õ¥¡¥¤¥ëžÁ÷¡¢¥Á¥ã¥Ã¥È¤Ê¤É¤Î¥Ä¡¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "¥Ç¡¼¥¿¥Ù¡¼¥¹"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ¤« MySQL ¥Ç¡¼¥¿¥Ù¡¼¥¹¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "¥Þ¥·¥ó¤ÎÀßÄê¤ò³Ú¤Ë¤¹¤ë¥Ä¡¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡¡¥µ¥¦¥ó¥É"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "¥æ¡¼¥Æ¥£¥ê¥Æ¥£"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "¥³¥ó¥½¡¼¥ë¥Ä¡¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix ¥á¡¼¥ë¥µ¡¼¥Ð, Inn ¥Ë¥å¡¼¥¹¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¡¦¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡¦¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "ÀßÄê"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "¥°¥é¥Õ¥£¥«¥ë¤Ê¥Ç¥¹¥¯¥È¥Ã¥×¤ò¤â¤Ã¤È"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "K ¥Ç¥¹¥¯¥È¥Ã¥×´Ä¶­¡£´ðËÜŪ¤Ê¥°¥é¥Õ¥£¥¹¥¯´Ä¶­¤Ë¡¢´ØÏ¢¥Ä¡¼¥ëµÍ¤á¹ç¤ï¤»"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache ¤È Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD ¤ò¤Ä¤¯¤Ã¤Æ¾Æ¤¯¥Ä¡¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "¥ª¥Õ¥£¥¹¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm ¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "The Gimp¤Ê¤É¤Î²èÁü½èÍý¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ¤È C++ ³«È¯¥é¥¤¥Ö¥é¥ê¡¢¥×¥í¥°¥é¥à¤ä include ¥Õ¥¡¥¤¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥³¥ó¥Ô¥å¡¼¥¿¡¦¥µ¡¼¥Ð"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "¥µ¡¼¥Ð¡¢¥á¡¼¥ë/¥°¥ë¡¼¥×¥¦¥§¥¢/¥Ë¥å¡¼¥¹"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "¥²¡¼¥à¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "¥Ó¥Ç¥ª¥×¥ì¡¼¥ä¤äÊÔ½¸¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡¡²èÁü"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "¸ä³Ú¥½¥Õ¥È¡§¥Æ¥ì¥Ó¥²¡¼¥à¡¢¥Ü¡¼¥É¥²¡¼¥à¡¢Àïά¥²¡¼¥à¤Ê¤É"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"¥á¡¼¥ë¤ä¥Ë¥å¡¼¥¹¤ÎÁ÷¼õ¿®Íѥġ¼¥ë (pine, mutt, tin..) ¤È¡¢Web¥Ö¥é¥¦¥ºÍѥġ¼¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "¥¢¡¼¥«¥¤¥Ö¥½¥Õ¥È¡¢¥¨¥ß¥å¥ì¡¼¥¿¡¢¥â¥Ë¥¿ÍÑ¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "¸Ä¿Í¤Îºâ̳´ÉÍý"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "»È¤¤¤ä¤¹¤¤¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¤ä¥Ç¥¹¥¯¥È¥Ã¥×¥Ä¡¼¥ë¤ò»ý¤Ä¡¢¥°¥é¥Õ¥£¥¯¥¹´Ä¶­"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ssh ¤Ê¤É³Æ¼ï¥×¥í¥È¥³¥ëÍÑ¥¯¥é¥¤¥¢¥ó¥È"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥²¡¼¥È¥¦¥§¥¤"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "¥µ¥¦¥ó¥É¤ä¥Ó¥Ç¥ª¤ÎºÆÀ¸ÊÔ½¸¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "¤½¤Î¾¥°¥é¥Õ¥£¥Ã¥¯¥Ç¥¹¥¯¥È¥Ã¥×"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "¥¨¥Ç¥£¥¿¡¢¥·¥§¥ë¡¢¥Õ¥¡¥¤¥ë´ØÏ¢¥Ä¡¼¥ë¡¢¥¿¡¼¥ß¥Ê¥ë"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "gnucash¤Ê¤É¤Î²È·×´ÉÍý¥½¥Õ¥È"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "¸Ä¿Í¾ðÊó´ÉÍý"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢¡¡CD ¤ò¾Æ¤¯"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "²Ê³Ø¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó"
-
-#~ msgid "About"
-#~ msgstr "¾ðÊó"
-
-#~ msgid "             Help           "
-#~ msgstr "             ¥Ø¥ë¥×           "
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "¥«¡¼¥Í¥ë¤ËÂбþ¤·¤¿¥«¡¼¥Í¥ë¥â¥¸¥å¡¼¥ë¤ò¥¢¥¯¥»¥¹¤Ç¤­¤Þ¤»¤ó¡Ê¥Õ¥¡¥¤¥ë%s¤¬¤¢¤ê"
-#~ "¤Þ¤»¤ó)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr ""
-#~ "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,-*-fixed-medium-r-"
-#~ "normal--24-*-100-100-c-*-jisx0208.1983-0,*"
-
-#~ msgid "None"
-#~ msgstr "¤Ê¤·"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤òÁª¤Ó¤Þ¤·¤ç¤¦¡ª"
-
-#~ msgid ""
-#~ "With remote CUPS servers, you do not have to configure any printer here; "
-#~ "CUPS servers inform your machine automatically about their printers. All "
-#~ "printers known to your machine currently are listed in the \"Default "
-#~ "printer\" field. Choose the default printer for your machine there and "
-#~ "click the \"Apply/Re-read printers\" button. Click the same button to "
-#~ "refresh the list (it can take up to 30 seconds after the start of CUPS "
-#~ "until all remote printers are visible). When your CUPS server is in a "
-#~ "different network, you have to give the CUPS server IP address and "
-#~ "optionally the port number to get the printer information from the "
-#~ "server, otherwise leave these fields blank."
-#~ msgstr ""
-#~ "¥ê¥â¡¼¥È¤Î CUPS ¥µ¡¼¥Ð¤Ê¤é¡¢¤³¤³¤Ç¤Ï¥×¥ê¥ó¥¿ÀßÄê¤ÏÉÔÍפǤ¹¡£\n"
-#~ "CUPS ¥µ¡¼¥Ð¤Ï¥Þ¥·¥ó¤Ë¼«Æ°Åª¤Ë¥×¥ê¥ó¥¿¾ðÊó¤òÅϤ·¤Þ¤¹¡£¤¤¤Þ¡¢\n"
-#~ "¤¢¤Ê¤¿¤Î¥Þ¥·¥ó¤¬ÃΤäƤ¤¤ë¥×¥ê¥ó¥¿¤¬ \"¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿\"\n"
-#~ "¤Ë½Ð¤Æ¤¤¤Þ¤¹¡£¥Þ¥·¥ó¤Î¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤òÁª¤ó¤Ç¡¢\n"
-#~ "\"¥×¥ê¥ó¥¿¤òŬÍÑ/ºÆÆɹþ\" ¥Ü¥¿¥ó¤ò²¡¤·¤Æ¤¯¤À¤µ¤¤¡£°ìÍ÷¤Î¹¹¿·\n"
-#~ "¤Ë¤â¤³¤Î¥Ü¥¿¥ó¤ò²¡¤·¤Þ¤¹¡Ê¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤¬¸«¤¨¤ë¤Þ¤Ç¡¢CUPS \n"
-#~ "³«»Ï¤«¤éºÇÂç30É䫤«¤ê¤Þ¤¹¡£\n"
-#~ "CUPS ¥µ¡¼¥Ð¤¬Ê̤Υͥåȥ¥¯¤Ë¤¢¤ë¤Ê¤é¡¢CUPS¥µ¡¼¥Ð¤ÎIP¥¢¥É¥ì¥¹\n"
-#~ "¤È¡¢¾ì¹ç¤Ë¤è¤Ã¤Æ¤Ï¥Ý¡¼¥ÈÈÖ¹æ¤ò»ØÄꤷ¤Ê¤¤¤È¥µ¡¼¥Ð¤«¤é¥×¥ê¥ó¥¿¾ð\n"
-#~ "Ê󤬤â¤é¤¨¤Þ¤»¤ó¡£¤½¤¦¤Ç¤Ê¤±¤ì¤Ð¡¢¤³¤³¤Ï¶õÍó¤Ë¤·¤Þ¤¹¡£"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "¥×¥ê¥ó¥¿¤òŬÍÑ/ºÆÆɹþ"
-
-#~ msgid "Configure printing system"
-#~ msgstr "°õºþ¥·¥¹¥Æ¥àÀßÄê"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "¥â¥¸¥å¡¼¥ë %s ¤Î¥ª¥×¥·¥ç¥ó¤ò»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "Low"
-#~ msgstr "Ä㤤"
-
-#~ msgid "Medium"
-#~ msgstr "¤Û¤É¤Û¤É"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "¤³¤Î¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤Ï¤Á¤ç¤Ã¤È¤è¤¯¤Ê¤Ã¤Æ¤¤¤Æ¡¢·Ù¹ð¤ä¥Á¥§¥Ã¥¯¤¬\n"
-#~ "Áý¤¨¤Æ¤¤¤Þ¤¹¡£"
-
-#~ msgid "Boot mode"
-#~ msgstr "¥Ö¡¼¥È¥â¡¼¥É"
-
-#~ msgid "Export"
-#~ msgstr "¥¨¥­¥¹¥Ý¡¼¥È"
-
-#~ msgid "click here"
-#~ msgstr "¤³¤³¤ò¥¯¥ê¥Ã¥¯"
-
-#~ msgid "mount failed"
-#~ msgstr "¥Þ¥¦¥ó¥È¤Ë¼ºÇÔ"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linux ¤Ï»þ´Ö¤òGMT¡¢¤Ä¤Þ¤ê¡Ö¥°¥ê¥Ë¥Ã¥¸É¸½à»þ¡×¤Ç´ÉÍý¤·¤Æ¤¤¤Æ¡¢¤½¤ì¤ò\n"
-#~ "¤¢¤Ê¤¿¤ÎÁª¤ó¤À»þ´ÖÂӤˤ¢¤ï¤»¤ÆÊÑ´¹¤·¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You may choose to upload updated packages that have been released after "
-#~ "the\n"
-#~ "distribution has been made available. You will get security fixes or bug\n"
-#~ "fixes, but you need to have an Internet connection configured to "
-#~ "proceed.\n"
-#~ "Answer \"Yes\" to the dialog to choose an available mirror. After "
-#~ "choosing\n"
-#~ "a mirror, a packages selection tree appears to allow you to choose "
-#~ "packages\n"
-#~ "individually, package that need to be updated are already selected, but "
-#~ "you\n"
-#~ "may choose to install other package or deselect packages. Press \"Install"
-#~ "\"\n"
-#~ "to install the updated package or \"Cancel\" not to upgrade them. (this\n"
-#~ "*REALLY* need to be modified according to real DrakX, if you need other\n"
-#~ "help section, let us (DrakX team developer) known)."
-#~ msgstr ""
-#~ "¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¸ø³«»þ°Ê¹ß¤Ë¹¹¿·¤µ¤ì¤¿¥Ñ¥Ã¥±¡¼¥¸¤ò¥¢¥Ã¥×¥í¡¼¥É\n"
-#~ "¤¹¤ë¤è¤¦¤Ë»ØÄê¤Ç¤­¤Þ¤¹¡£¥»¥­¥å¥ê¥Æ¥£¥Õ¥£¥Ã¥¯¥¹¤ä¥Ð¥°¥Õ¥£¥Ã¥¯¥¹¤¬¤Ç¤­\n"
-#~ "¤Þ¤¹¤¬¡¢¤³¤ì¤Ë¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤¬É¬ÍפǤ¹¡£\n"
-#~ "»È¤¨¤ë¥ß¥é¡¼¥µ¥¤¥È¤òÁª¤Ö¤Ë¤Ï¡¢¥À¥¤¥¢¥í¥°¤Ç \"¤Ï¤¤\" ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "¥Ñ¥Ã¥±¡¼¥¸ÁªÂò¥Ä¥ê¡¼¤¬½Ð¤Æ¤­¤Æ¡¢¸ÄÊ̤˥ѥ屡¼¥¸¤òÁª¤Ù¤ë¤è¤¦¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "¹¹¿·¤¬É¬Íפʥѥ屡¼¥¸¤ÏÁªÂòºÑ¤ß¤Ç¤¹¤¬¡¢Â¾¤Î¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤ê¡¢¤Þ¤Ï¤¿\n"
-#~ "°ìÉô¤òÁªÂò²ò½ü¤Ç¤­¤Þ¤¹¡£¹¹¿·¥Ñ¥Ã¥±¡¼¥¸¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¤Ï \"¥¤¥ó¥¹¥È¡¼¥ë"
-#~ "\"\n"
-#~ "¤ò²¡¤·¡¢¹¹¿·¤·¤Ê¤¤¤Ê¤é \"¥­¥ã¥ó¥»¥ë\" ¤ò²¡¤·¤Þ¤¹ (¤³¤ì¤ÏËÜʪ¤Î DrakXŪ\n"
-#~ "¤Ë¤ÏÀäÂФËÊѹ¹¤¹¤Ù¤­¤Ç¡¢¤â¤·Â¾¤Î¥Ø¥ë¥×¤¬É¬Íפʤ顢DrakX³«È¯¥Á¡¼¥à¤Þ¤Ç\n"
-#~ "¤´°ìÊó¤ò¡£"
-
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "¤¤¤Þ¤Î¥×¥ê¥ó¥¿¤Ç»È¤¨¤ë¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò¸«¤ë¤Ë¤Ï¡¢²¼¤Î°ìÍ÷¤òÆɤफ¡¢¤¢¤ë¤¤¤Ï"
-#~ "¡Ö¥ª¥×¥·¥ç¥ó°ìÍ÷¤ò°õºþ¡×¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£%s\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr ""
-#~ "¤³¤Î %s ¥¹¥­¥ã¥Ê¤Ï¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¤ò»È¤¦¤Î¤Ç¡¢¤¤¤Þ¤Ï¥µ¥Ý¡¼¥È¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#~ msgid "Connect to Internet"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ø¤ÎÀܳ"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤éÀÚÃÇ"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯Àܳ (LAN/¥¤¥ó¥¿¡¼¥Í¥Ã¥È)¤ÎÀßÄê"
-
-#~ msgid "authentification"
-#~ msgstr "ǧ¾Ú"
-
-#~ msgid "user"
-#~ msgstr "¥æ¡¼¥¶"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "nfs ¶¦Í­¥ê¥½¡¼¥¹¤Ç»È¤¨¤ë¤â¤Î¤ò¥¹¥­¥ã¥óÃæ"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "¥µ¡¼¥Ð %s ¤Î nfs ¶¦Í­¥ê¥½¡¼¥¹¤Ç»È¤¨¤ë¤â¤Î¤ò¥¹¥­¥ã¥óÃæ"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "samba ¶¦Í­¥ê¥½¡¼¥¹¤Ç»È¤¨¤ë¤â¤Î¤ò¥¹¥­¥ã¥óÃæ"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "¥µ¡¼¥Ð %s ¤Î samba ¶¦Í­¥ê¥½¡¼¥¹¤Ç»È¤¨¤ë¤â¤Î¤ò¥¹¥­¥ã¥óÃæ"
-
-#~ msgid "Removable media"
-#~ msgstr "¥ê¥à¡¼¥Ð¥Ö¥ë¥á¥Ç¥£¥¢"
-
-#~ msgid "Active"
-#~ msgstr "¥¢¥¯¥Æ¥£¥Ö"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "¡Ö%s¡×¥×¥ê¥ó¥¿¤¬¡¢¼¡¤Î¤È¤³¤í¤Ç¸«¤Ä¤«¤ê¤Þ¤·¤¿"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹"
-
-#~ msgid "Printer Device"
-#~ msgstr "¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "¥Ç¥Ð¥¤¥¹/¥Õ¥¡¥¤¥ë̾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "¥ê¥â¡¼¥ÈCUPS ¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "¥ê¥â¡¼¥È¥µ¡¼¥Ð¾å¤Î¥×¥ê¥ó¥¿"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Àܳ¤·¤Æ¤¤¤Þ¤¹..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Àܳ¤òÊĤ¸¤Æ¤¤¤Þ¤¹..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Àܳ¤¬ÊĤ¸¤Æ¤¤¤Þ¤»¤ó¡£\n"
-#~ "root ¤Ë¤Ê¤Ã¤Æ¡¢°Ê²¼¤ò¼Â¹Ô¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡§\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down"
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "¥·¥¹¥Æ¥à¤ÎÀܳ¤ÏÀÚÃǤµ¤ì¤Þ¤·¤¿¡£"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥µ¥¤¥º¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#~ msgid "Total size: "
-#~ msgstr "¹ç·×¥µ¥¤¥º: "
-
-#~ msgid "Please wait, "
-#~ msgstr "¤·¤Ð¤é¤¯¤ªÂÔ¤Á²¼¤µ¤¤¡¤"
-
-#~ msgid "Total time "
-#~ msgstr "¹ç·×»þ´Ö "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "¤¹¤Ç¤Ë¤¢¤ë X11 ¤ÎÀßÄê¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "¥×¥ê¥ó¥¿¤¬¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥Ç¥Ð¥¤¥¹¤Ï²¿¤Ç¤¹¤«\n"
-#~ "(Ãí°Õ /dev/lp0 ¤Ï LPT1: ¤Ë¤Ê¤ê¤Þ¤¹)¡©\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "·Ù¹ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤Ï¤â¤¦ÀßÄ꤬¤¹¤ó¤Ç¤¤¤Þ¤¹¡£\n"
-#~ "ÀßÄê¤ò¤ä¤ê¤Ê¤ª¤·¤Þ¤¹¤è¡£"
-
-#~ msgid "New"
-#~ msgstr "¿·µ¬"
-
-#~ msgid "Remote"
-#~ msgstr "¥ê¥â¡¼¥È"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "¾å¤Î¥Ü¥¿¥ó¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤«\n"
-#~ "\n"
-#~ "\"New\"¤ò»È¤¤¤Þ¤¹"
-
-#~ msgid "Use \"New\""
-#~ msgstr "\"New\"¤ò»È¤¤¤Þ¤¹"
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "¾å¤Î°ìÍ÷¤Ë´õ˾¤Î¥¨¥ó¥È¥ê¤¬¤Ê¤±¤ì¤Ð¤³¤³¤ËÆþÎϤ·¤Þ¤·¤ç¤¦:"
-
-#~ msgid "Shared resource"
-#~ msgstr "¶¦Í­¥ê¥½¡¼¥¹"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "ÉÔÌÀ (%s)¡¤¤â¤Ã¤ÈÀµ³Î¤Ë\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr "? (¥Ç¥Õ¥©¥ë¥È¤Ï %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "¤É¤ì¤Ë¤·¤Þ¤¹¤«¡©¡Ê¥Ç¥Õ¥©¥ë¥È¤Ï %s¡¢Áª¤Ð¤Ê¤¤¤Ê¤é¡Ö¤Ê¤·¡×¡Ë"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin ¤¬ÆɤߤȤêÍѤ˳«¤±¤Þ¤»¤ó: %s"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "¤Õ¤Ä¤¦¤Ï¡Ö/dev/hda¡×¡Ê¥×¥é¥¤¥Þ¥ê¥Á¥ã¥Í¥ë¤Î¥Þ¥¹¥¿¡¼¥É¥é¥¤¥Ö¡Ë¤«¡¢\n"
-#~ "¡Ö/dev/sda¡× (ºÇ½é¤Î SCSI ¥Ç¥£¥¹¥¯) ¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "¼«¿®¤¬¤¢¤ë¾ì¹ç¤Ë¤À¤±Â¾¤ÎÃͤòÆþ¤ì¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹ %s ¤òºÆµ¯Æ°¤·¤Þ¤¹¡£¤¤¤¤¤Ç¤¹¤Í¡©"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤òºÆµ¯Æ°¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "¤è¤í¤·¤¤¤Ç¤¹¤Í¡©"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹¤òºÆµ¯Æ°¤·¤Þ¤¹¤è:\n"
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "°Ê²¼¤Î°õºþ¥­¥å¡¼¤¬ÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-#~ "°õºþ¥­¥å¡¼¤òÄɲá¦Êѹ¹¤Ç¤­¤Þ¤¹¡£"
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Àܳ¥¿¥¤¥à¥¢¥¦¥È (ÉÃ) [ ¥Ù¡¼¥¿¡¢Ì¤¼ÂÁõ ]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux ¤ÏÊ£¿ô¤Î CDROM ¤Ë¤Þ¤¿¤¬¤Ã¤Æ¤¤¤Þ¤¹¡£¤Ç¤¹¤«¤é drakX ¤¬\n"
-#~ "¥¤¥ó¥¹¥È¡¼¥ëCDROM°Ê³°¤ÎCDROM¤ËÆþ¤Ã¤¿¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤ó¤À¤«¤â¤·¤ì¤Þ¤»¤ó¡£\n"
-#~ "Ê̤ÎCDROM¤¬É¬Íפˤʤ俤顢¤¤¤Þ¤ÎCDROM¤Ï¥¤¥¸¥§¥¯¥È¤µ¤ì¤Æ¡¢Ê̤ΤòÆþ¤ì¤Æ\n"
-#~ "¤¯¤ì¤ÈºÅÂ¥¤¬¤Ç¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "drakX just skips this test unless you purposely click on the "
-#~ "corresponding step\n"
-#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
-#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
-#~ "\n"
-#~ "Perhaps this is not what you want. In that case, you just have to select "
-#~ "the\n"
-#~ "right type for your mouse in the list which appears.\n"
-#~ "\n"
-#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
-#~ "are\n"
-#~ "good. If not, you can click on \"Cancel\" to choose another driver."
-#~ msgstr ""
-#~ "drakX ¤Ï¡¢º¸¤ÎÂбþ¤¹¤ë¥¹¥Æ¥Ã¥×¤ò°Õ¿ÞŪ¤Ë¥¯¥ê¥Ã¥¯¤·¤Æ¤¤¤Ê¤¤¸Â¤ê¡¢¤³¤Î\n"
-#~ "¥Æ¥¹¥È¤ò¤È¤Ð¤·¤Þ¤¹¡£¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï drakX ¤Ï¡¢¥Þ¥¦¥¹¤¬2¥Ü¥¿¥ó¥Þ¥¦¥¹¤À\n"
-#~ "¤ÈȽÃǤ·¤ÆÃæ±û¥Ü¥¿¥ó¤Ï¥¨¥ß¥å¥ì¡¼¥È¤·¤Þ¤¹¤·¡¢¤½¤ì¤¬ PS/2, ¥·¥ê¥¢¥ë¡¢ USB\n"
-#~ "¤Î¤É¤ì¤«¤Ï¼«Æ°È½Äꤷ¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "¤Ç¤â¡¢¤³¤ì¤Ï¤¢¤Ê¤¿¤Î¤Û¤·¤¤ÀßÄê¤Ç¤Ï¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤½¤Î¾ì¹ç¤Ë¤Ï¡¢\n"
-#~ "½Ð¤Æ¤¯¤ë°ìÍ÷¤«¤éŬÀڤʥޥ¦¥¹¤Î¼ïÎà¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "¤µ¤¢¡¢¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£¥Ü¥¿¥ó¤ä¥Û¥¤¡¼¥ë¤ò»È¤Ã¤ÆÀßÄ꤬\n"
-#~ "Âç¾æÉפ«³Îǧ¤·¤Þ¤¹¡£¤À¤á¤Ê¤é¡Ö¥­¥ã¥ó¥»¥ë¡×¤òÁª¤ó¤ÇÊ̤Υɥ饤¥Ð¤Ë¤·¤Þ¤¹¡£"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "%s ¤ò¥Ç¥Õ¥©¥ë¥È¥×¥ê¥ó¥¿¤Ë¤Ç¤­¤Þ¤»¤ó¤Ç¤·¤¿¡ª"
-
-#~ msgid "Spooler: "
-#~ msgstr "¥¹¥×¡¼¥é: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "Press next to continue."
-#~ msgstr "¡Ö¼¡¡×¤ò²¡¤·¤ÆÀè¤Ë¿Ê¤ß¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "¥Ç¥Õ¥©¥ë¥È¤Î¥é¥ó¥ì¥Ù¥ë"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "/etc/fstab ¤ò¹¹¿·"
-
-#~ msgid "Format all"
-#~ msgstr "Á´¤Æ¤ò¥Õ¥©¡¼¥Þ¥Ã¥È"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Á´¤Æ¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤¿¸å,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "¤³¤ì¤é¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥óÃæ¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹"
-
-#~ msgid "Reload"
-#~ msgstr "¥ê¥í¡¼¥É"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤Î»þ¤È¥·¥¹¥Æ¥àÍøÍÑ»þ¤Ë»È¤¤¤¿¤¤¸À¸ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "¥¤¥ó¥¹¥È¡¼¥ë¤ò³¤±¤ë¤Ë¤Ï¡¢¾å¤Î¥é¥¤¥»¥ó¥¹¤Î¾ò¹à¤ËƱ°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¾ò¹à¤ËƱ°Õ¤¹¤ë¤Ê¤é¡ÖƱ°Õ¤¹¤ë¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "Ʊ°Õ¤Ç¤­¤Ê¤±¤ì¤Ð¡ÖµñÈݡפòÁª¤Ó¤Þ¤¹¡£¥¤¥ó¥¹¥È¡¼¥ë¤Ï½ªÎ»¤·¡¢¸½ºß¤ÎÀßÄê¤Ï\n"
-#~ "¤½¤Î¤Þ¤Þ¤Ç¤¹"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "¾å¤Î¥ê¥¹¥È¤«¤é¡¢¼«Ê¬¤Î¥­¡¼¥Ü¡¼¥ÉÇÛÃÖ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "¤Û¤«¤Î¤³¤È¤Ð¡Ê¥¤¥ó¥¹¥È¡¼¥ë³«»Ï»þ¤ËÁª¤ó¤À¤Î¤È¤ÏÊ̤Τ³¤È¤Ð¡Ë¤ò˾¤à\n"
-#~ "¤Ê¤é¡¢¾å¤Î°ìÍ÷¤«¤éÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£Á´ÉôÁª¤Ö¤È¤­¤Ë¤Ï¡¢¡ÖÁ´Éô¡×¤ò\n"
-#~ "Áª¤Ù¤Ð¤À¤¤¤¸¤ç¤¦¤Ö¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "ÁªÂò:\n"
-#~ "\n"
-#~ "  - ¥«¥¹¥¿¥Þ¥¤¥º: GNU/Linux ¤Ë¾Ü¤·¤±¤ì¤Ð¡¢¼«Ê¬¤Î¥Þ¥·¥ó¤Î¼ç¤Ê»È¤¤Êý¤Ë\n"
-#~ "    ¤¢¤ï¤»¤ÆÁª¤Ó¤Þ¤·¤ç¤¦¡£¾Ü¤·¤¯¤Ï°Ê²¼¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥¨¥­¥¹¥Ñ¡¼¥È: ¤³¤ì¤ÏËÜÅö¤ËGNU/Linux¤Ë¾Ü¤·¤¤¿Í¤¬¡¢Èó¾ï¤ËÆüì¤Ê\n"
-#~ "    ¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤¿¤¤¾ì¹ç¤ËÁª¤Ó¤Þ¤¹¡£¡Ö¥«¥¹¥¿¥Þ¥¤¥º¡×\n"
-#~ "    ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÈƱ¤¸¤¯¡¢¼«Ê¬¤Î¥·¥¹¥Æ¥à¤Î»È¤¤Êý¤òÁª¤Ù¤Þ¤¹¡£\n"
-#~ "    ¤Ç¤â¡¢´°Á´¤Ë¼«¿®¤¬¤Ê¤¤¤Ê¤é¡¢ÀäÂФˤ³¤ì¤Ï»È¤ï¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡ª"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "¥Þ¥·¥ó¤Î»È¤¤Êý¤ÎÁªÂò»è¡Ê¤³¤ì¤Ï¤Ä¤Þ¤ê¡¢¤¢¤Ê¤¿¤¬¥¤¥ó¥¹¥È¡¼¥ë¤ÎÁªÂò¤Ç\n"
-#~ "¡Ö¥«¥¹¥¿¥à¡×¤«¡Ö¥¨¥­¥¹¥Ñ¡¼¥È¡×¤òÁª¤ó¤À¤é»È¤¤¤Þ¤¹¡Ë¤Ï°Ê²¼¤ÎÄ̤ê:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥ï¡¼¥¯¥¹¥Æ¡¼¥·¥ç¥ó: ¥Þ¥·¥ó¤ò¼ç¤Ë¥Ç¥¹¥¯¥È¥Ã¥×¤Î°ìÈÌÍøÍѤǻȤ¦¤Ê\n"
-#~ "    ¤é¡¢¤³¤ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¥ª¥Õ¥£¥¹¶È̳¡¢²èÁü¤ÎÊÔ½¸¤Ê¤É¤Ç¥Þ¥·¥ó\n"
-#~ "    ¤ò»È¤¦¾ì¹ç¤Ë¤Ï¤³¤ì¤Ç¤¹¡£¥³¥ó¥Ñ¥¤¥é¤ä³«È¯ÍѤΥ桼¥Æ¥£¥ê¥Æ¥£¤ÏÆþ\n"
-#~ "    ¤ì¤Þ¤»¤ó¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ³«È¯ÍÑ: ̾Á°¤Î¤È¤ª¤ê¡£¤³¤Î¥Þ¥·¥ó¤ò¼ç¤Ë¥½¥Õ¥È³«È¯¤Ç»È¤¦¤Î¤Ê¤é¡¢\n"
-#~ "    ¤³¤ì¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¥½¡¼¥¹¥³¡¼¥É¤ò¥³¥ó¥Ñ¥¤¥ë¡¢¥Ç¥Ð¥Ã¥°¡¢À°·Á\n"
-#~ "    ¤·¤¿¤ê¡¢¥½¥Õ¥È¥Ñ¥Ã¥±¡¼¥¸¤òºî¤Ã¤¿¤ê¤¹¤ë¤Î¤Ë»È¤¦¥½¥Õ¥È½¸¤¬¤¹¤Ù¤Æ\n"
-#~ "    ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥µ¡¼¥ÐÍÑ: Mandrake Linux¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤è¤¦¤È¤·¤Æ¤¤¤ë¥Þ¥·¥ó¤ò¡¢\n"
-#~ "    ¥µ¡¼¥ÐÀìÍѤǻȤ¦¤Ä¤â¤ê¤Ê¤é¤³¤ì¤Ç¤¹¡£¥Õ¥¡¥¤¥ë¥µ¡¼¥Ð (NFS¤äSMB)¡¢\n"
-#~ "    ¥×¥ê¥ó¥¿¥µ¡¼¥Ð¡ÊUnix¤Îlp (¥é¥¤¥ó¥×¥ê¥ó¥¿) ¥×¥í¥È¥³¥ë¤«¥¦¥£¥ó¥É¥¦¥º\n"
-#~ "    ¼°¤ÎSMB·Ðͳ¤Î°õºþ¡Ë¡¢Ç§¾Ú¥µ¡¼¥Ð (NIS)¡¢¥Ç¡¼¥¿¥Ù¡¼¥¹¥µ¡¼¥Ð¤Ê¤É¤Ç¤¹¡£\n"
-#~ "    ¤³¤Î¾ì¹ç¤Ë¤Ï¡¢KDE¤äGNOME¤Ê¤É¤Î¤³¤¶¤«¤·¤¤Âåʪ¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "¤Ç¤Ï¥¤¥ó¥¹¥È¡¼¥ë¡¦¥¢¥Ã¥×¥°¥ì¡¼¥É¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸·²¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "Áª¤ó¤À¤é¡¢DrakX ¤Î¤Û¤¦¤Ç¡¢¤½¤ì¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤À¤±¤Î;͵¤¬¤¢¤ë¤«\n"
-#~ "¥Á¥§¥Ã¥¯¤·¤Þ¤¹¡£ÉÔ­¤Ê¤é·Ù¹ð¤ò½Ð¤·¤Þ¤¹¡£¤½¤ì¤Ç¤â³¤±¤¿¤±¤ì¤Ð¡¢DrakX\n"
-#~ "¤Ï¼ÂºÝ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¿Ê¤ß¤Þ¤¹¤¬¡¢½ÅÍפǤʤ¤¥Ñ¥Ã¥±¡¼¥¸¤ÏÍî¤È¤·¤Þ¤¹¡£\n"
-#~ "°ìÍ÷¤ÎºÇ¸å¤Ë¡Ö¸ÄÊ̤Υѥ屡¼¥¸¤òÁªÂò¡×¤È¤¤¤¦¤Î¤¬¤¢¤ê¤Þ¤¹¡£¤³¤ì¤ò\n"
-#~ "Áª¤Ö¤È¡¢1000¸Ä°Ê¾å¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¤º¤Ã¤È¸«¤Æ¤¤¤¯¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¤è..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤ò¸ÄÊ̤ËÁª¤Ù¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Ñ¥Ã¥±¡¼¥¸¥¦¥£¥ó¥É¥¦¤Îº¸¤¹¤ß¤Ë¤¢¤ë¥ª¥×¥·¥ç¥ó¤ò¥¯¥ê¥Ã¥¯¤¹¤ë¤È¡¢¥Ä¥ê¡¼¤ò\n"
-#~ "¤Î¤Ð¤·¤¿¤ê½Ì¤á¤¿¤ê¤Ç¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Ñ¥Ã¥±¡¼¥¸¤ò abc ½ç¤ËʤÙÂؤ¨¤¿¤±¤ì¤Ð¡¢¡Öabc½ç¤È¥°¥ë¡¼¥×½çÀÚ¤êÂؤ¨¡×\n"
-#~ "¥¢¥¤¥³¥ó¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "°Í¸´Ø·¸¤Ë¤Ä¤¤¤Æ¤Î·Ù¹ð¤¬¤¤¤é¤Ê¤±¤ì¤Ð¡¢¡Ö°Í¸´Ø·¸¼«Æ°½èÍý¡×¤ò\n"
-#~ "¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£¤³¤ì¤òÁª¤Ö¤È¡¢¤¢¤ë¥Ñ¥Ã¥±¡¼¥¸¤òÁªÂò²ò½ü\n"
-#~ "¤·¤¿¤é¡¢¤½¤ì¤Ë°Í¸¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸¤â¤À¤Þ¤Ã¤Æ²ò½ü¤µ¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "¾åµ­¤Î°ìÍ÷¤ÎCD¤¬¤¹¤Ù¤Æ¤½¤í¤Ã¤Æ¤¤¤ì¤Ð¡¢Ok¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-#~ "CD¤¬°ì¤Ä¤â¤Ê¤±¤ì¤Ð¡¢¥­¥ã¥ó¥»¥ë¤ò¥¯¥ê¥Ã¥¯¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "¼ê¸µ¤Ë¤Ê¤¤CD¤¬¤¢¤ì¤Ð¡¢¤½¤ì¤òÁªÂò¤«¤é¤Ï¤º¤·¤Æ¤«¤éOk¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "¤Ç¤Ï¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Þ¤·¤ç¤¦¡£¥Ü¥¿¥ó¤ä¥Û¥¤¡¼¥ë¤ò»È¤Ã¤Æ¤ß¤Æ\n"
-#~ "¤³¤ÎÀßÄ꤬¤¤¤¤¤«»î¤·¤Æ¤¯¤À¤µ¤¤¡£¥À¥á¤Ê¤é¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò¥¯¥ê¥Ã¥¯\n"
-#~ "¤·¤ÆÊ̤Υɥ饤¥Ð¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤â¤·¥¢¥Ã¥×¥ë¤Î¥Þ¥·¥ó¤Ç¥Þ¥¦¥¹¥Ü¥¿¥ó¤¬°ì¤Ä¤·¤«¤Ê¤±¤ì¤Ð¡¢2ÈÖÌܤÈ3ÈÖÌÜ\n"
-#~ "¤Î¥Þ¥¦¥¹¥Ü¥¿¥ó¤ò¥¨¥ß¥å¡¼¥ì¡¼¥È¤¹¤ë¥­¡¼¤ÎÁȤ߹ç¤ï¤»¤¬»ØÄê¤Ç¤­¤Þ¤¹¡£\n"
-#~ "¤³¤ì¤Ç Linux ¥³¥ó¥½¡¼¥ë¤Ç¤â X ¥¦¥£¥ó¥É¥¦ GUI ¤Ç¤â¡¢¥Þ¥¦¥¹¤Îµ¡Ç½¤ò\n"
-#~ "´°Á´¤Ë»È¤¨¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "ADB ¥Þ¥¦¥¹¤ò»È¤Ã¤Æ¤¤¤ë¤È¤­¤Ï USB ¤òÁªÂò¤·¤Æ¤¯¤À¤µ¤¤¡£Linux ¥«¡¼¥Í¥ë\n"
-#~ "¤Î¤Û¤¦¤Ç¡¢¥Þ¥¦¥¹¤Î¥Ï¡¼¥É¥¦¥§¥¢¤Î¥Þ¥Ã¥Ô¥ó¥°¤ò¤­¤Á¤ó¤È½èÍý¤·¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "¥Þ¥·¥ó¤ò¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ä LAN ¤Ë¤Ä¤Ê¤®¤¿¤¤¤Ê¤é¡¢Âбþ¤¹¤ë\n"
-#~ "¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡¢Àµ¤·¤¤¥ª¥×¥·¥ç¥ó¤òÁª¤ÖÁ°¤Ë¡¢¤½¤Î¥Ç¥Ð¥¤¥¹\n"
-#~ "¤ÎÅŸ»¤ò¤¤¤ì¤Æ¡¢DrakX ¤Ë¼«Æ°¸¡½Ð¤µ¤»¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ä LAN ¤ËÀܳ¤·¤Ê¤¤¤Ê¤é¡¢¡Ö¥Í¥Ã¥È¥ï¡¼¥¯¤ò»È¤ï¤Ê¤¤¡×¤ò\n"
-#~ "Áª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤ò¤¢¤È¤Þ¤ï¤·¤Ë¤¹¤ë¤«¡¢¤¢¤ë¤¤¤Ï¤â¤¦ÀßÄꤷ½ª¤ï¤Ã¤Æ¤¤¤ë\n"
-#~ "¤Ê¤é¡Ö´°Î»¡×¤òÁª¤Ó¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "¥â¥Ç¥à¤¬¸¡½Ð¤Ç¤­¤Þ¤»¤ó¡£¥â¥Ç¥à¤Î¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥·¥ê¥¢¥ë¥Ý¡¼¥È¤ò\n"
-#~ "Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "»²¹Í¤Þ¤Ç¤Ë¡¢ºÇ½é¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¡Ê¥¦¥£¥ó¥É¥¦¥º¤Ç¤Ï¡ÖCOM1¡×¡Ë¤Ï¡¢\n"
-#~ "Linux ¤Ç¤Ï¡ÖttyS0¡×¤È¸Æ¤Ð¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "¤µ¤¢¥À¥¤¥ä¥ë¥¢¥Ã¥×¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£²¿¤òÆþÎϤ·¤Æ¤¤¤¤¤«¤ï¤«¤é¤Ê¤¤¡¢\n"
-#~ "¤Þ¤¿¤Ï¼«¿®¤¬¤Ê¤¤¤È¤­¤Ï¡¢Àµ¤·¤¤¾ðÊó¤ò¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Î¥×¥í¥Ð¥¤¥À¤Ë\n"
-#~ "¶µ¤ï¤Ã¤Æ¤¯¤À¤µ¤¤¡£DNS (¥Í¡¼¥à¥µ¡¼¥Ð) ¾ðÊó¤ò¤³¤³¤ÇÆþÎϤ·¤Ê¤±¤ì¤Ð¡¢\n"
-#~ "¤³¤Î¾ðÊó¤ÏÀܳ»þ¤Ë¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Î¥×¥í¥Ð¥¤¥À¤«¤é¼èÆÀ¤µ¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "¥â¥Ç¥à¤¬³°ÉÕ¤±¤Ê¤é¡¢¤¤¤ÞÅŸ»¤òÆþ¤ì¤Æ¡¢DrakX¤Ë¼«Æ°Åª¤Ë¸¡½Ð¤µ¤»¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "¥â¥Ç¥à¤ÎÅŸ»¤òÆþ¤ì¤Æ¡¢Àµ¤·¤¤¤â¤Î¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "¾å¤Î¾ðÊó¤¬Àµ¤·¤¤¤«¤É¤¦¤«¤ï¤«¤é¤Ê¤¤¡¢¤¢¤ë¤¤¤Ï²¿¤òÆþÎϤ¹¤ë¤«\n"
-#~ "¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢Àµ¤·¤¤¾ðÊó¤ò¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Î¥×¥í¥Ð¥¤¥À¡ÊISP) ¤Ë\n"
-#~ "¶µ¤ï¤Ã¤Æ¤¯¤À¤µ¤¤¡£DNS (¥Í¡¼¥à¥µ¡¼¥Ð) ¾ðÊó¤ò¤³¤³¤ÇÆþÎϤ·¤Ê¤±¤ì¤Ð¡¢\n"
-#~ "¤³¤Î¾ðÊó¤ÏÀܳ»þ¤Ë¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Î¥×¥í¥Ð¥¤¥À¤«¤é¼èÆÀ¤µ¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "¤Ç¤Ï¡¢É¬Íפʤé¥Û¥¹¥È̾¤òÆþ¤ì¤Æ¤¯¤À¤µ¤¤¡£¤â¤·¤ï¤«¤é¤Ê¤¤¤«¡¢\n"
-#~ "²¿¤òÆþÎϤ·¤Æ¤¤¤¤¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢ISP¤ËÀµ¤·¤¤¾ðÊó¤ò¶µ¤ï¤Ã¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "¤½¤ì¤Ç¤Ï¥Í¥Ã¥È¥ï¡¼¥¯¥Ç¥Ð¥¤¥¹¤òÀßÄꤷ¤Þ¤·¤ç¤¦:\n"
-#~ "\n"
-#~ "  - IP ¥¢¥É¥ì¥¹: ¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "    ²¼¤Ç¡Ö¼«Æ° IP¡× ¥ª¥×¥·¥ç¥ó¤òÁª¤Ö¤Ê¤é¡¢ÆþÎϤ·¤Ê¤¤¤Ç¤¯¤À¤µ¤¤\n"
-#~ "\n"
-#~ "  - ¥Í¥Ã¥È¥Þ¥¹¥¯: ¡Ö255.255.255.0¡×¤Ë¤·¤Æ¤ª¤¯¤Î¤¬ÌµÆñ¤Ç¤¹¡£¼«¿®¤¬¤Ê¤±¤ì"
-#~ "¤Ð\n"
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¼«Æ° IP: ¥Í¥Ã¥È¥ï¡¼¥¯¤Ç BOOTP ¤« DHCP ¥×¥í¥È¥³¥ë¤ò»È¤Ã¤Æ¤¤¤¿¤é\n"
-#~ "¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤³¤ì¤òÁª¤Ö¤È¡¢¡ÖIP ¥¢¥É¥ì¥¹¡×¤ò»ØÄê\n"
-#~ "¤¹¤ëɬÍפϤ¢¤ê¤Þ¤»¤ó¡£¼«¿®¤¬¤Ê¤±¤ì¤Ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ\n"
-#~ "¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "¤µ¤Æ¡¢É¬Íפʤ鼫ʬ¤Î¥Û¥¹¥È̾¤òÆþÎϤ·¤Þ¤·¤ç¤¦¡£\n"
-#~ "¤ï¤«¤é¤Ê¤¤¤«¼«¿®¤¬¤Ê¤±¤ì¤Ð¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "¤³¤³¤ÇɬÍפʤ顢¥Û¥¹¥È̾¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡£¤â¤·\n"
-#~ "¤ï¤«¤é¤Ê¤¤¤«¼«¿®¤¬¤Ê¤±¤ì¤Ð¡¢¶õ¤±¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "¤Ç¤Ï¥À¥¤¥ä¥ë¥¢¥Ã¥×¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£²¿¤òÆþÎϤ·¤Æ¤¤¤¤¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢\n"
-#~ "ISP¤ËÀµ¤·¤¤¾ðÊó¤ò¶µ¤ï¤Ã¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "¥×¥í¥­¥·¤ò»È¤¦¤Ê¤é¡¢¤³¤³¤ÇÀßÄꤷ¤Þ¤·¤ç¤¦¡£¥×¥í¥­¥·¤ò»È¤¦¤«¤É¤¦¤«\n"
-#~ "¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤«ISP¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÎÀßÄ꤬Àµ¤·¤±¤ì¤Ð¡¢¤³¤³¤Ç°Å¹æ¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë\n"
-#~ "¤Ç¤­¤Þ¤¹¡£¤Þ¤º¥Ñ¥Ã¥±¡¼¥¸¤ò¤È¤Ã¤Æ¤¯¤ë¥µ¥¤¥È¤òÁª¤ó¤Ç¡¢¤½¤ì¤«¤é¥¤¥ó¥¹¥È¡¼¥ë\n"
-#~ "¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "¤Ê¤ª¡¢¥µ¥¤¥È¤ÎÁªÂò¤È°Å¹æ¥Ñ¥Ã¥±¡¼¥¸¤ÎÁªÂò¤Ï¡¢¼«Ê¬¤Î¤È¤³¤í¤ÎË¡µ¬À©¤Ë¤¢¤Ã¤¿\n"
-#~ "¤â¤Î¤Ë¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "¤µ¤Æ¡¢¼«Ê¬¤Îµï¾ì½ê¤Ë¤¢¤ï¤»¤¿¥¿¥¤¥à¥¾¡¼¥ó¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "ÀßÄꤹ¤ë¥×¥ê¥ó¥¿¤Ï¡¢¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¡Ê¤³¤Î¥Þ¥·¥ó¤ËľÀܤĤʤ¬¤Ã¤¿¤â¤Î¡Ë¤Ç"
-#~ "¤â\n"
-#~ "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿ (Unix, Netware, MS Windows ¤Î¥Í¥Ã¥È¥ï¡¼¥¯·Ðͳ¤Î¤â¤Î¡Ë¤Ç"
-#~ "¤â\n"
-#~ "¤«¤Þ¤¤¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "°õºþ¤Ç¤­¤ë¤è¤¦¤Ë¤·¤¿¤¤¤Ê¤é¤Ð¡¢CUPS ¤È LPR¤Î¤É¤Á¤é¤«¤Î°õºþ¥·¥¹¥Æ¥à¤ò\n"
-#~ "Áª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ¤Ï¿·¤·¤¤¡¢¶¯ÎϤǽÀÆð¤Ê Unix ÍÑ°õºþ¥·¥¹¥Æ¥à¤Ç¤¹ (CUPS¤È¤¤¤¦¤Î¤Ï\n"
-#~ "¡ÖCommon Unix Printing System¡×¤Îά)¡£Mandrake Linux¤Ç¤Ï¤³¤ì¤¬¥Ç¥Õ¥©¥ë¥È\n"
-#~ "¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR ¤Ï¸Å¤¤°õºþ¥·¥¹¥Æ¥à¤Ç¡¢ÀΤΠMandrake Linux ¤Ç»È¤Ã¤Æ¤¤¤Þ¤·¤¿¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥×¥ê¥ó¥¿¤ò»ý¤Ã¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢¡Ö¤Ê¤·¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ¤Ï³Æ¼ï¤Î¥×¥ê¥ó¥¿¤ò°·¤¨¤Þ¤¹¡£¤½¤ì¤¾¤ìÀßÄ꤬¤Á¤¬¤Ã¤Æ¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤â¤·¥×¥ê¥ó¥¿¤¬¥Þ¥·¥ó¤ËľÀܤĤʤ¬¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢¡Ö¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¡×¤ò\n"
-#~ "Áª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥ê¥â¡¼¥È¤Î Unix ¥Þ¥·¥ó¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤·¤¿¤¤¾ì¹ç¤Ë¤Ï¡¢\n"
-#~ "¡Ö¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¡×¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥ê¥â¡¼¥È¤Î MS Windows ¥Þ¥·¥ó¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤¹¤ë¤Ê¤é\n"
-#~ "(¤¢¤ë¤¤¤Ï SMB ¥×¥í¥È¥³¥ë¤ò»È¤Ã¤¿ Unix ¥Þ¥·¥ó¤Î¥×¥ê¥ó¥¿¡Ë¡¢Áª¤Ö¤Î¤Ï\n"
-#~ "¡ÖSMB/Windows 95/98/NT¡×¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Þ¤º¥×¥ê¥ó¥¿¤ÎÅŸ»¤òÆþ¤ì¤Æ¡¢DrakX ¤¬¸¡½Ð¤Ç¤­¤ë¤è¤¦¤Ë¤·¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "¤µ¤é¤Ë¤¤¤¯¤Ä¤«¾ðÊó¤¬Íפê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¥×¥ê¥ó¥¿Ì¾: ¥×¥ê¥ó¥¿¤Î¥¹¥×¡¼¥é¤Ï¡¢¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿Ì¾¤È¤·¤Æ¡Ölp¡×"
-#~ "¤ò\n"
-#~ "     »È¤¤¤Þ¤¹¡£¤À¤«¤é¡Ölp¡×¤È¤¤¤¦¥×¥ê¥ó¥¿¤¬É¬ÍפǤ¹¡£¤â¤·¥×¥ê¥ó¥¿¤¬\n"
-#~ "     °ìÂæ¤À¤±¤Ç¤â¡¢Ì¾Á°¤ÏÊ£¿ô»ý¤¿¤»¤é¤ì¤Þ¤¹¡£¤¿¤À¡¢¤½¤ì¤ò¥Ñ¥¤¥×ʸ»ú¡Ö¡Ã¡×"
-#~ "¤Ç\n"
-#~ "     ¶èÀÚ¤ì¤Ð¤¤¤¤¤Î¤Ç¤¹¡£¤Ç¤¹¤«¤é¡¢¤â¤Ã¤È°ÕÌ£¤Î¤¢¤ë̾Á°¤Ë¤·¤¿¤±¤ì¤Ð¡¢\n"
-#~ "     ¤½¤ì¤ò¤Þ¤º»ý¤Ã¤Æ¤­¤Þ¤·¤ç¤¦¡£¡ÖMy printer|lp¡×¤È¤¤¤¦¶ñ¹ç¡£\n"
-#~ "     ̾Á°¤Ë¡Ölp¡×¤Î¤Ä¤¤¤¿¥×¥ê¥ó¥¿¤¬¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ÀâÌÀ: ¤³¤ì¤Ï¤Ê¤¯¤Æ¤â¤¤¤¤¤Ç¤¹¤¬¡¢Ê£¿ô¤Î¥×¥ê¥ó¥¿¤ò»ý¤Ã¤Æ¤¤¤¿¤ê¡¢¤Û¤«"
-#~ "¤Î\n"
-#~ "     ¥Þ¥·¥ó¤¬¤³¤Î¥×¥ê¥ó¥¿¤Ë¥¢¥¯¥»¥¹¤¹¤ë¤È¤­¤ËÊØÍø¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¾ì½ê: ¤â¤·¥×¥ê¥ó¥¿¤Î¾ì½ê¤Ë¤Ä¤¤¤Æ¾ðÊó¤òÆþ¤ì¤¿¤±¤ì¤Ð¡¢¤³¤³¤Ë\n"
-#~ "     ÆþÎϤ·¤Þ¤·¤ç¤¦¡Ê¡ÖÆ󳬡פȤ«¹¥¤­¤Êµ­½Ò¤Ç¤«¤Þ¤¤¤Þ¤»¤ó¡Ë¡£\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤¤¤í¤¤¤í¾ðÊó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¥­¥å¡¼¤Î̾Á°: ¥×¥ê¥ó¥¿¤Î¥¹¥×¡¼¥é¤Ï¡¢¥Ç¥Õ¥©¥ë¥È¤Ç¤Ï¡Ölp¡×¤ò»È¤¤¤Þ"
-#~ "¤¹¡£\n"
-#~ "     ¤À¤«¤é¡Ölp¡×¤È¤¤¤¦¥×¥ê¥ó¥¿¤¬É¬ÍפǤ¹¡£\n"
-#~ "     ¤â¤·¥×¥ê¥ó¥¿¤¬°ìÂæ¤À¤±¤Ç¤â¡¢Ì¾Á°¤ÏÊ£¿ô»ý¤¿¤»¤é¤ì¤Þ¤¹¡£¤¿¤À¡¢¤½¤ì¤ò\n"
-#~ "     ¥Ñ¥¤¥×ʸ»ú¡Ö¡Ã¡×¤Ç¶èÀÚ¤ì¤Ð¤¤¤¤¤Î¤Ç¤¹¡£¤Ç¤¹¤«¤é¡¢¤â¤Ã¤È°ÕÌ£¤Î¤¢¤ë\n"
-#~ "     ̾Á°¤Ë¤·¤¿¤±¤ì¤Ð¡¢¤½¤ì¤ò¤Þ¤º»ý¤Ã¤Æ¤­¤Þ¤·¤ç¤¦¡£¡ÖMy printer|lp¡×¤È\n"
-#~ "     ¤¤¤¦¶ñ¹ç¡£\n"
-#~ "     ̾Á°¤Ë¡Ölp¡×¤Î¤Ä¤¤¤¿¥×¥ê¥ó¥¿¤¬¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¥¹¥×¡¼¥ë¥Ç¥£¥ì¥¯¥È¥ê: ¤³¤Î¥Ç¥£¥ì¥¯¥È¥ê¤Ë°õºþ¥¸¥ç¥Ö¤¬Êݸ¤µ¤ì¤Þ¤¹¡£\n"
-#~ "     ²¿¤ò»È¤¦¤Ù¤­¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ¥×¥ê¥ó¥¿Àܳ: ¥×¥ê¥ó¥¿¤¬¥Þ¥·¥ó¤ËľÀܤĤʤ¬¤Ã¤Æ¤¤¤ë¾ì¹ç¤Ï¡¢\n"
-#~ "     ¡Ö¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¡×¤òÁª¤Ó¤Þ¤¹¡£¥ê¥â¡¼¥È¤ÎUnix¥Þ¥·¥ó¾å¤Î¥×¥ê¥ó¥¿¤ò\n"
-#~ "     »È¤¦¤Ë¤Ï¡¢¡Ö¥ê¥â¡¼¥Èlpd¥×¥ê¥ó¥¿¡×¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "     ¥ê¥â¡¼¥È¤Î¥¦¥£¥ó¥É¥¦¥º¥Þ¥·¥ó¡Ê¤Þ¤¿¤ÏSMB ¥×¥í¥È¥³¥ë»ÈÍѤÎUnix¥Þ¥·¥ó\n"
-#~ "     ¾å¤Î¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤¹¤ë¤Ë¤Ï¡¢¡ÖSMB/Windows 95/98/NT¡×¤òÁª¤Ó¤Þ"
-#~ "¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "     NetWare ¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤·¤¿¤±¤ì¤Ð¡¢\n"
-#~ "     ¡ÖNetWare¡×¤òÁª¤Ó¤Þ¤¹¡£\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "¥×¥ê¥ó¥¿¤¬¸¡½Ð¤Ç¤­¤Þ¤»¤ó¡£¥×¥ê¥ó¥¿¤¬Àܳ¤µ¤ì¤¿¥Ç¥Ð¥¤¥¹Ì¾¤òÆþÎϤ·¤Æ\n"
-#~ "¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤Á¤Ê¤ß¤Ë¡¢¥×¥ê¥ó¥¿¤Ï¤Õ¤Ä¤¦¤ÏºÇ½é¤Î¥Ñ¥é¥ì¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¤â¤Î¤Ç"
-#~ "¤¹¡£\n"
-#~ "¤³¤ì¤ÏGNU/Linux ¤Ç¤Ï¡Ö/dev/lp0¡×¤À¤·¡¢¥¦¥£¥ó¥É¥¦¥º¤Ç¤Ï¡ÖLPT1¡×¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "¤µ¤¢¾å¤Î°ìÍ÷¤«¤é¼«Ê¬¤Î¥×¥ê¥ó¥¿¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "¼«Ê¬¤Î¥×¥ê¥ó¥¿¤Ë¤¢¤Ã¤¿¡¢Àµ¤·¤¤¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "¤Ê¤Ë¤òÁª¤Ö¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥×¥ê¥ó¥¿¤Î»ñÎÁ¤ò¸«¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¼¡¤Î¥¹¥Æ¥Ã¥×¤ÇÀßÄê¤ò¥Æ¥¹¥È¤Ç¤­¤Þ¤¹¤·¡¢¤½¤ì¤¬»×¤¤Ä̤ê¤Ëµ¡Ç½¤·¤Ê¤±¤ì¤Ð\n"
-#~ "¤½¤³¤ÇÊѤ¨¤é¤ì¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "¤Ç¤ÏMandrake Linux¥·¥¹¥Æ¥à¤Îroot¥Ñ¥¹¥ï¡¼¥É¤òÀßÄꤷ¤Þ¤·¤ç¤¦¡£\n"
-#~ "¥Ñ¥¹¥ï¡¼¥É¤Ï 2 ²óÆþÎϤ·¤Æ¡¢¥¿¥¤¥×¥ß¥¹¤¬¤Ê¤¤¤«¤É¤¦¤«¤ò³Îǧ¤·¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "Root¤È¤¤¤¦¤Î¤Ï¥·¥¹¥Æ¥à¤Î´ÉÍý¼Ô¤Ç¡¢¥·¥¹¥Æ¥à¤ÎÀßÄê¤òÊѤ¨¤é¤ì¤ëÍ£°ì¤Î\n"
-#~ "¿Íʪ¤Ç¤¹¡£¤Ç¤¹¤«¤é¡¢¤³¤Î¥Ñ¥¹¥ï¡¼¥É¤òÆþÎϤ¹¤ë¤È¤­¤ÏÃí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡ª\n"
-#~ "root¸¢¸Â¤òÉÔÀµ¤Ë»È¤¦¤È¡¢¤³¤Î¥·¥¹¥Æ¥à¤ä¡¢¥Í¥Ã¥È¥ï¡¼¥¯¤Ç¤Ä¤Ê¤¬¤Ã¤¿Â¾¤Î\n"
-#~ "¥·¥¹¥Æ¥à¤ä¤½¤Î¥Ç¡¼¥¿¤Ë½ÅÂç¤Ê´í¸±¤òµÚ¤Ü¤¹¤³¤È¤Ë¤Ê¤ê¤«¤Í¤Þ¤»¤ó¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Ñ¥¹¥ï¡¼¥É¤Ï¡¢¥¢¥ë¥Õ¥¡¥Ù¥Ã¥È¤ä¿ô»ú¤òº®¤¼¤¿¤â¤Î¤Ë¤·¤Æ¡¢ºÇÄã¤Ç¤â 8 ʸ»ú\n"
-#~ "ɬÍפǤ¹¡£*ÀäÂФË*¥á¥â¤Ã¤Æ¤ª¤¤¤¿¤ê¤·¤Æ¤Ï¤¤¤±¤Þ¤»¤ó¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤Ç¤âŤ¹¤®¤¿¤ê¤ä¤ä¤³¤·¤¹¤®¤¿¤ê¤¹¤ë¥Ñ¥¹¥ï¡¼¥É¤â¥À¥á¤Ç¤¹¤è¡£¼«Ê¬¤Ç¤Ï\n"
-#~ "³Ú¤Ë»×¤¤¤À¤»¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯¤Çǧ¾Ú¤Ë LDAP (¤Þ¤¿¤Ï NIS) ¤ò»È¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢Ç§¾Ú¤Î¤È¤³¤í¤Ç\n"
-#~ "\"LDAP\" (¤Þ¤¿¤Ï \"NIS\") ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢¥Í¥Ã¥È¥ï¡¼¥¯\n"
-#~ "¤Î´ÉÍý¼Ô¤Ë¤­¤­¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "¤â¤·¥³¥ó¥Ô¥å¡¼¥¿¤¬´ÉÍý¼Ô¤Ä¤­¥Í¥Ã¥È¥ï¡¼¥¯¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Ê¤¤¤Ê¤é\n"
-#~ "ǧ¾Ú¤Ë¤Ï \"¥í¡¼¥«¥ë¥Õ¥¡¥¤¥ë\" ¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "¤Ç¤Ï¤³¤³¤Ç¡¢¡ÖÄ̾ï¤Î¡×¥æ¡¼¥¶¥¢¥«¥¦¥ó¥È¤ò¤Ä¤¯¤ê¤Þ¤¹¡£\n"
-#~ "¤³¤ì¤Ï¡ÖÆø¢¡×¥æ¡¼¥¶¥¢¥«¥¦¥ó¥È¤Îroot ¤È¤Ï¤Á¤¬¤¤¤Þ¤¹¡£¤³¤Î¥·¥¹¥Æ¥à¤ò\n"
-#~ "»È¤¦¿Í¤¿¤Á¤Ë¡¢¤½¤ì¤¾¤ìÊÌ¡¹¤Î¥¢¥«¥¦¥ó¥È¤ò¤Ä¤¯¤ë¤è¤¦¤Ë¤·¤Þ¤¹¡£³Æ¥¢¥«¥¦\n"
-#~ "¥ó¥È¤ÏÆȼ«¤Î´Ä¶­ÀßÄê¡Ê¥°¥é¥Õ¥£¥Ã¥¯´Ä¶­¡¢¥×¥í¥°¥é¥àÀßÄê¤Ê¤É¡Ë¤ò»ý¤Á¡¢\n"
-#~ "¤½¤ì¤¾¤ì¼«Á°¤Î¡Ö¥Û¡¼¥à¥Ç¥£¥ì¥¯¥È¥ê¡×¤ò»ý¤Ã¤Æ¤½¤³¤Ë¤³¤¦¤¤¤¦ÀßÄê¤òÊݸ\n"
-#~ "¤·¤Æ¤ª¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤Þ¤º¤Ï¼«Ê¬ÍѤΥ¢¥«¥¦¥ó¥È¤ò¤Ä¤¯¤Ã¤Æ¤¯¤À¤µ¤¤¡ª¡¡¥æ¡¼¥¶¤¬¤¢¤Ê¤¿°ì¿Í¤Ç¤â¡¢\n"
-#~ "¤Õ¤À¤ó¥·¥¹¥Æ¥à¤ò»È¤¦¤È¤­¤Ë¤Ï¡¢root¤ò»È¤Ã¤Æ¤Ï*¤¤¤±¤Þ¤»¤ó¡ª*\n"
-#~ "¤³¤ì¤ò¤ä¤ë¤È¡¢¥»¥­¥å¥ê¥Æ¥£¾å¤Î¥ê¥¹¥¯¤¬¤­¤ï¤á¤ÆÂ礭¤¯¤Ê¤ê¤Þ¤¹¡£¤Á¤ç¤Ã¤È\n"
-#~ "¤·¤¿¥¿¥¤¥×¥ß¥¹¤Ç¡¢¥·¥¹¥Æ¥à¤ò²õ¤¹¤ª¤½¤ì¤â½Ð¤Æ¤­¤Þ¤¹¤è¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤·¤¿¤¬¤Ã¤Æ¡¢¤Õ¤Ä¤¦¤Ï¤³¤³¤Ç¤Ä¤¯¤ë¥æ¡¼¥¶¥¢¥«¥¦¥ó¥È¤Ç¥·¥¹¥Æ¥à¤ò»È¤¤¤Þ¤·¤ç\n"
-#~ "¤¦¡£root¤Ç¥í¥°¥¤¥ó¤¹¤ë¤Î¤Ï¡¢¥·¥¹¥Æ¥à´ÉÍý¤È¥á¥ó¥Æ¥Ê¥ó¥¹¤Î¤È¤­¤À¤±¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "µ¯Æ°¥Ç¥£¥¹¥¯¤ÏÀ§Èó¤È¤â¤Ä¤¯¤Ã¤Æ¤ª¤¤¤Æ¤¯¤À¤µ¤¤¡£¥Þ¥·¥ó¤òµ¯Æ°¤Ç¤­¤Ê¤¯\n"
-#~ "¤Ê¤Ã¤¿¤é¡¢¤³¤ì¤¬ºÆ¥¤¥ó¥¹¥È¡¼¥ë¤»¤º¤Ë¥Ç¥£¥¹¥¯¤òµß¤¦Í£°ì¤Î¼êÃʤǤ¹¡£"
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO ¤È grub ¤Î¼çÍ×¥ª¥×¥·¥ç¥ó¤Ï°Ê²¼¤Î¤È¤ª¤ê¤Ç¤¹:\n"
-#~ "  - ¥Ö¡¼¥È¥Ç¥Ð¥¤¥¹: ¥Ö¡¼¥È¥»¥¯¥¿¤ò»ý¤Ä¥Ç¥Ð¥¤¥¹Ì¾¤òÀßÄê¡Ê¤¿¤È¤¨¤Ð¥Ï¡¼¥É\n"
-#~ "¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¡Ë¡£¼«¿®¤¬¤Ê¤¤¸Â¤ê¡¢¡Ö/dev/hda¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥Ç¥Õ¥©¥ë¥È¥¤¥á¡¼¥¸µ¯Æ°¤ÎÂÔ¤Á»þ´Ö: ¥Ö¡¼¥È¥í¡¼¥À¤¬ºÇ½é¤Î¥¤¥á¡¼¥¸¤òµ¯Æ°\n"
-#~ "¤¹¤ë¤Þ¤Ç¤ÎÂÔ¤Á»þ´Ö¤ò1/10ÉÃñ°Ì¤Ç»ØÄꤷ¤Þ¤¹¡£¤³¤ì¤Ï¡¢¥­¡¼¥Ü¡¼¥É¤¬Í­¸ú¤Ë\n"
-#~ "¤Ê¤Ã¤Æ¤¹¤°¤Ë¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤«¤éµ¯Æ°¤¹¤ë¥·¥¹¥Æ¥à¤Ê¤É¤ÇÊØÍø¤Ç¤¹¡£¤³¤Î\n"
-#~ "¡ÖÂÔ¤Á»þ´Ö¡×¤¬Ìµµ­Æþ¤À¤Ã¤¿¤ê¥¼¥í¤À¤Ã¤¿¤ê¤·¤¿¤é¡¢¥Ö¡¼¥È¥í¡¼¥À¤ÏÂÔ¤Á¤Þ¤»"
-#~ "¤ó¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥Ó¥Ç¥ª¥â¡¼¥É¡§µ¯Æ°»þ¤Ë»È¤¦ VGA ¥Æ¥­¥¹¥È¥â¡¼¥É¤ò»ØÄꤷ¤Þ¤¹¡£»È¤¨¤ë¤Î"
-#~ "¤Ï\n"
-#~ "°Ê²¼¤ÎÃͤǤ¹¡§\n"
-#~ "\n"
-#~ "    * ¥Î¡¼¥Þ¥ë: Ä̾ï¤Î 80x25 ¤Î¥Æ¥­¥¹¥È¥â¡¼¥É\n"
-#~ "\n"
-#~ "    * <¿ô»ú>:  ¿ô»ú¤ËÂбþ¤·¤¿¥Æ¥­¥¹¥È¥â¡¼¥É\n"
-#~ "\n"
-#~ "  - µ¯Æ°¤Î¤¿¤Ó¤Ë \"/tmp\" ¤ò¥¯¥ê¥¢: ¥·¥¹¥Æ¥àµ¯Æ°»þ¤Ë \"/tmp\" Æâ¤ÎÁ´¥Õ¥¡¥¤"
-#~ "¥ë¤ä¥Ç¥£¥ì¥¯¥È¥ê¤ò\n"
-#~ "¾Ãµî¤·¤¿¤±¤ì¤Ð¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ɬÍפ˱þ¤¸¤Æ¸·Ì©¤Ê RAM »ØÄê: »ÄÇ°¤Ê¤¬¤é¡¢BIOS ¤Ë¥Þ¥·¥ó¾å¤Î RAM ¤Î\n"
-#~ "Àµ³Î¤ÊÎ̤ò¤­¤¯ÊýË¡¤ÏÅý°ì¤µ¤ì¤Æ¤¤¤Þ¤»¤ó¡£¤³¤Î¤¿¤á Linux ¤Ï¡¢RAM¤Î\n"
-#~ "Î̤òÀµ³Î¤Ë¸¡½Ð¤Ç¤­¤Ê¤¤¤«¤â¤·¤ì¤Þ¤»¤ó¡£¤³¤Î¾ì¹ç¡¢¤³¤³¤ÇÀµ³Î¤Ê RAM ¤Î\n"
-#~ "Î̤ò¤³¤³¤Ç»ØÄê¤Ç¤­¤Þ¤¹¡£¤Ê¤ª¡¢¸¡½Ð¤µ¤ì¤¿RAM¤È¼ÂºÝ¤ÎRAM¤¬ 2-4 MB ¤Û¤É\n"
-#~ "¤º¤ì¤Æ¤¤¤ë¤Î¤Ï¤Þ¤Ã¤¿¤¯ÌäÂê¤Ê¤¤¼«Á³¤Ê¤³¤È¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO ¤ÏSPARCÍѤΥ֡¼¥È¥í¡¼¥À¤Ç¤¹¡£¥³¥ó¥Ô¥å¡¼¥¿¾å¤ÎGNU/Linux\n"
-#~ "¤Ê¤É³Æ¼ïOS¤òµ¯Æ°¤Ç¤­¤Þ¤¹¡£\n"
-#~ "ÉáÄ̤ϡ¢¤³¤ì¤é¤ÎOS¤Ï¼«Æ°Åª¤Ë¤­¤Á¤ó¤È¸¡½Ð¤µ¤ì¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-#~ "¤³¤ì¤¬¥À¥á¤Ê¤é¡¢¤³¤³¤Ç¼êÆ°¤Ç¥¨¥ó¥È¥ê¤òÄɲä·¤Þ¤·¤ç¤¦¡£¥Ñ¥é¥á¡¼¥¿¤ò\n"
-#~ "¤Þ¤Á¤¬¤¨¤Ê¤¤¤è¤¦Ãí°Õ¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¾¤ÎOS¤Ë¤Ï¾¤Î¿Í¤¬¥¢¥¯¥»¥¹¤Ç¤­¤Ê¤¤¤è¤¦¤Ë¤·¤¿¤¤¤³¤È¤â¤¢¤ê¤Þ¤¹¡£¤³¤Î\n"
-#~ "¾ì¹ç¤Ë¤Ï¤½¤ÎOS¤Î¥¨¥ó¥È¥ê¤òºï½ü¤·¤Æ¤ª¤­¤Þ¤·¤ç¤¦¡£¤¿¤À¤·¤³¤Î¾ì¹ç¤Ï¡¢\n"
-#~ "¤½¤ÎOS¤ò»È¤¦¤È¤­¤Ë¤Ïµ¯Æ°¥Ç¥£¥¹¥¯¤¬Íפê¤Þ¤¹¤è¡ª"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO ¤Î¼çÍ×¥ª¥×¥·¥ç¥ó¤Ï°Ê²¼¤Î¤È¤ª¤ê¤Ç¤¹:\n"
-#~ "  - ¥Ö¡¼¥È¥í¡¼¥À¤ÎƳÆþ: GNU/Linux ¤òµ¯Æ°¤¹¤ë¤Î¤ËɬÍפȤʤë¾ðÊó¤òÃÖ¤¯¾ì½ê"
-#~ "¤ò\n"
-#~ "Æþ¤ì¤Æ¤¯¤À¤µ¤¤¡£¤Ê¤Ë¤ò¤¹¤ì¤Ð¤¤¤¤¤«¤Ï¤Ã¤­¤ê¤Èʬ¤«¤é¤Ê¤¤¾ì¹ç¤Ï¡¢\n"
-#~ "¡Ö¥É¥é¥¤¥Ö¤ÎºÇ½é¤Î¥»¥¯¥¿(MBR)¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥Ç¥Õ¥©¥ë¥È¥¤¥á¡¼¥¸µ¯Æ°¤ÎÂÔ¤Á»þ´Ö: ¥Ö¡¼¥È¥í¡¼¥À¤¬ºÇ½é¤Î¥¤¥á¡¼¥¸¤òµ¯Æ°\n"
-#~ "¤¹¤ë¤Þ¤Ç¤ÎÂÔ¤Á»þ´Ö¤ò1/10ÉÃñ°Ì¤Ç»ØÄꤷ¤Þ¤¹¡£¤³¤ì¤Ï¡¢¥­¡¼¥Ü¡¼¥É¤¬Í­¸ú¤Ë\n"
-#~ "¤Ê¤Ã¤Æ¤¹¤°¤Ë¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤«¤éµ¯Æ°¤¹¤ë¥·¥¹¥Æ¥à¤Ê¤É¤ÇÊØÍø¤Ç¤¹¡£¤³¤Î\n"
-#~ "¡ÖÂÔ¤Á»þ´Ö¡×¤¬Ìµµ­Æþ¤À¤Ã¤¿¤ê¥¼¥í¤À¤Ã¤¿¤ê¤·¤¿¤é¡¢¥Ö¡¼¥È¥í¡¼¥À¤ÏÂÔ¤Á¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "¤Ç¤ÏX¥¦¥£¥ó¥É¥¦¥·¥¹¥Æ¥à¤ÎÀßÄê¤ò¤·¤Þ¤·¤ç¤¦¡£¤³¤ì¤ÏGNU/Linux GUI (¥°¥é¥Õ¥£¥«"
-#~ "¥ë\n"
-#~ "¥æ¡¼¥¶¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¡Ë¤Î³Ë¿´Éôʬ¤Ç¤¹¡£¤³¤Î¤¿¤á¤Ë¤Ï¤Þ¤º¡¢¥Ó¥Ç¥ª¥«¡¼¥É¤È\n"
-#~ "¥â¥Ë¥¿¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£¤¬¡¢ÅÓÃæ¡¢¤Û¤È¤ó¤É¤Ï¼«Æ°²½¤µ¤ì¤Æ¤¤¤ë¤Î¤Ç¡¢Ä̾ï¤Ê¤é\n"
-#~ "ñ¤Ë¡¢·ë²Ì¤ò¸«¤Æ¤½¤ÎÀßÄê¤ò¾µÇ§¤¹¤ë¤À¤±¤Ç¤¹¤ß¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "ÀßÄ꤬½ª¤ï¤Ã¤¿¤é¡¢X¤¬¤¿¤Á¤¢¤¬¤ê¤Þ¤¹¡Ê¤¢¤Ê¤¿¤¬¤½¤¦¤¹¤ë¤Ê¤ÈDrakX¤ËÌ¿Îᤷ¤Ê"
-#~ "¤¤\n"
-#~ "¸Â¤ê¡Ë¡£¤³¤ì¤ÇÀßÄ꤬Àµ¤·¤¤¤«¤ò³Îǧ¤Ç¤­¤Þ¤¹¡£Àµ¤·¤¯¤Ê¤±¤ì¤Ð¡¢Ìá¤Ã¤Æ¤­¤Æ\n"
-#~ "¤ä¤ê¤Ê¤ª¤»¤Þ¤¹¡£¤³¤ì¤Ï²¿Å٤Ǥ⹥¤­¤Ê¤À¤±¤Ç¤­¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "X ¤ÎÀßÄ꤬¤ª¤«¤·¤±¤ì¤Ð¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò»È¤Ã¤Æ¡¢X¥¦¥£¥ó¥É¥¦¥·¥¹¥Æ¥à¤ò\n"
-#~ "Àµ¤·¤¯ÀßÄꤷľ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "¥°¥é¥Õ¥£¥«¥ë¡¦¥í¥°¥¤¥ó¤¬¹¥¤­¤Ê¤é¡¢¡Ö¤Ï¤¤¡×¤òÁª¤Ó¤Þ¤¹¡£¤½¤¦¤Ç¤Ê¤±¤ì¤Ð\n"
-#~ "¡Ö¤¤¤¤¤¨¡×¤òÁª¤Ó¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "¥Þ¥·¥ó¤Î¥»¥­¥å¥ê¥Æ¥£¤Î¥ì¥Ù¥ë¤òÁª¤Ù¤Þ¤¹¡£¾Ü¤·¤¤ÀâÌÀ¤Ï¥Þ¥Ë¥å¥¢¥ë¤ò»²¾È¡£\n"
-#~ "´ðËÜŪ¤Ë¤Ï¡¢¤É¤ì¤òÁª¤Ù¤Ð¤¤¤¤¤«¤ï¤«¤é¤Ê¤±¤ì¤Ð¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ë¤·¤Þ¤¹¡£\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "¥·¥¹¥Æ¥à¤òºÆµ¯Æ°¤·¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "ºÆµ¯Æ°¤·¤¿¤é¡¢¿·¤·¤¤ Mandrake Linux ¥·¥¹¥Æ¥à¤¬¼«Æ°Åª¤Ë¤¿¤Á¤¢¤¬¤ê¤Þ¤¹¡£\n"
-#~ "Ê̤ÎOS¤ò¤¿¤Á¤¢¤²¤¿¤¤¤È¤­¤Ë¤Ï¡¢ÄɲäÎÀâÌÀ¤òÆɤó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "linux¤ÎÊ£À½ÍѤˡ¢¼«Æ°¥¤¥ó¥¹¥È¡¼¥ë¥Ç¥£¥¹¥¯¤ò¤Ä¤¯¤ê¤Þ¤¹¤«¡©"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "¥Á¥§¥³¡Ê¥×¥í¥°¥é¥Þ¡Ë"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "¥¹¥í¥Ð¥­¥¢¡Ê¥×¥í¥°¥é¥Þ¡Ë"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL¤ÎÀßÄê"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue"
-#~ msgstr "¥ê¥â¡¼¥È¥­¥å¡¼"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "¥ê¥â¡¼¥È¥­¥å¡¼Ì¾¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Ï¡¢¥¸¥ç¥Ö¤ò¥×¥ê¥ó¥¿¤ËÁ÷¤ëÁ°¤Ë¡¢Ç¤°Õ¤Î¥³¥Þ¥ó¥É¤Ë¥Ñ¥¤¥×¤¹¤ë¤è¤¦»ØÄê¤Ç"
-#~ "¤­¤Þ¤¹¡£"
-
-#~ msgid "Command line"
-#~ msgstr "¥³¥Þ¥ó¥É¥é¥¤¥ó"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "¥³¥Þ¥ó¥É¥é¥¤¥ó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡ª"
-
-#~ msgid "Option %s->{ARGS}[%s]{'comment'} must be an integer number!"
-#~ msgstr "Option %s->{ARGS}[%s]{'comment'} ¤ÏÀµ¿ô¤Ë¤·¤Æ¤¯¤À¤µ¤¤!"
-
-#~ msgid "Option %s->{ARGS}[%s]{'comment'} must be a number!"
-#~ msgstr "Option %s->{ARGS}[%s]{'comment'} ¤Ï¿ô»ú¤Ë¤·¤Æ¤¯¤À¤µ¤¤!"
-
-#~ msgid "Option %s->{ARGS}[%s]{'comment'} out of range!"
-#~ msgstr "Option %s->{ARGS}[%s]{'comment'} ¤¬Èϰϳ°¤Ç¤¹!"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "¥ê¥â¡¼¥È CUPS ¥µ¡¼¥Ð¤Î¾ì¹ç¡¢¤³¤³¤Ç¤Ï¥×¥ê¥ó¥¿¤ÎÀßÄê¤ÏÉÔÍפǤ¹¡£\n"
-#~ "¥×¥ê¥ó¥¿¤Ï¼«Æ°¸¡½Ð¤µ¤ì¤Þ¤¹¡£¤¿¤À¤·¥µ¡¼¥Ð¤¬Ê̤Υͥåȥ¥¯¾å¤Ë\n"
-#~ "¤¢¤ë¤È¥À¥á¤Ç¤¹¡£¤³¤Î¤È¤­¤Ï¡¢CUPS¥µ¡¼¥Ð¤ÎIP¥¢¥É¥ì¥¹¤È¡¢É¬Íפʤé\n"
-#~ "¥Ý¡¼¥ÈÈÖ¹æ¤ò»ØÄꤷ¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "¥×¥ê¥ó¥¿¤Î̾Á°¤È¥³¥á¥ó¥È¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "ÀßÄê¥Õ¥¡¥¤¥ë¤ÎÆâÍƤ¬²ò¼á¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "ÀßÄê¥Õ¥¡¥¤¥ë¤¬ÊѤǤ¹"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "ÁϤë¥×¥í¥Õ¥£¡¼¥ë̾:"
-
-#~ msgid "Adapter"
-#~ msgstr "¥¢¥À¥×¥¿"
-
-#~ msgid "Disable network"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤ò̵¸ú¤Ë¤¹¤ë"
-
-#~ msgid "Enable network"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤òÍ­¸ú¤Ë¤¹¤ë"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¤Î´Æ»ë"
-
-#~ msgid "Profile "
-#~ msgstr "¥×¥í¥¤¡¼¥ë "
-
-#~ msgid "Statistics"
-#~ msgstr "Åý·×"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Á÷¿®Â®ÅÙ¡§"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "¼õ¿®Â®ÅÙ¡§"
-
-#~ msgid "Logs"
-#~ msgstr "¥í¥°"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ØÀܳ"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤éÀÚÃÇ"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤é¤ÎÀÚÃǤ˼ºÇÔ"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤«¤é¤ÎÀÚÃÇ´°Î»"
-
-#~ msgid "Connection complete."
-#~ msgstr "Àܳ´°Î»"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Àܳ¼ºÇÔ¡£\n"
-#~ "Mandrake ¥³¥ó¥È¥í¡¼¥ë¥»¥ó¥¿¡¼¤ÇÀßÄê¤ò³Îǧ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "sent: "
-#~ msgstr "Á÷¿®ºÑ¤ß¡§"
-
-#~ msgid "received: "
-#~ msgstr "¼õ¿®ºÑ¤ß¡§"
-
-#~ msgid "average"
-#~ msgstr "Ê¿¶Ñ"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "¤µ¤¢¡¢¥Þ¥¦¥¹¤ò¥Æ¥¹¥È¤·¤Æ¤ß¤Þ¤·¤ç¤¦¡¢¥Ü¥¿¥ó¤ä¥Û¥¤¡¼¥ë¤ò»È¤Ã¤Æ¤ß¤Æ¡¢\n"
-#~ "ÀßÄ꤬¤³¤ì¤Ç¤¤¤¤¤«¸«¤Æ¤¯¤À¤µ¤¤¡£¥À¥á¤Ê¤é¡Ö¥­¥ã¥ó¥»¥ë¡×¤ò²¡¤·¤Æ¡¢\n"
-#~ "¥É¥é¥¤¥Ð¤òÁª¤Óľ¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (¤Þ¤¿¤Ï ADSL) Àܳ"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "CUPS ¤Ç¥×¥ê¥ó¥¿¤ò¥¢¥¯¥»¥¹¤¹¤ë¤Ê¤é¡¢Ä¾ÀÜ URI ¤ò»ØÄê¤Ç¤­¤Þ¤¹¡£"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "ASCII¥Æ¥¹¥È¥Ú¡¼¥¸¤ò°õºþ¤·¤Æ¤ß¤ë"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "PostScript¥Æ¥¹¥È¥Ú¡¼¥¸¤ò°õºþ¤·¤Æ¤ß¤ë"
-
-#~ msgid "Paper Size"
-#~ msgstr "Íѻ極¥¤¥º"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "¥¸¥ç¥Ö¤Î¸å¤Ç¥Ú¡¼¥¸ÇӽФ·¤Þ¤¹¤«¡©"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint¥É¥é¥¤¥Ð¥ª¥×¥·¥ç¥ó"
-
-#~ msgid "Color depth options"
-#~ msgstr "¿§¿¼ÅÙ¥ª¥×¥·¥ç¥ó"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "¥Æ¥­¥¹¥È¤òPostScript¤Ç°õºþ¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "ʸ»ú¤Î¥¸¥ã¥®¡¼¤ò¤Ê¤ª¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "½ÐÎÏ¥Ú¡¼¥¸¤¢¤¿¤ê¤Î¥Ú¡¼¥¸¿ô"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "º¸±¦¤Î;Çò¤ò¥Ý¥¤¥ó¥È¿ô¡Ê1/72¥¤¥ó¥Á¡Ë¤Ç»ØÄê"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "¾å²¼¤Î;Çò¤ò¥Ý¥¤¥ó¥È¿ô¡Ê1/72¥¤¥ó¥Á¡Ë¤Ç»ØÄê"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "¤½¤Î¾ GhostScript¥ª¥×¥·¥ç¥ó"
-
-#~ msgid "Extra Text options"
-#~ msgstr "¤½¤Î¾¥Æ¥­¥¹¥È¥ª¥×¥·¥ç¥ó"
-
-#~ msgid "Reverse page order"
-#~ msgstr "ºÇ¸å¤Î¥Ú¡¼¥¸¤«¤é°õºþ"
-
-#~ msgid "CUPS starting"
-#~ msgstr "CUPS ³«»Ï"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "¥ê¥â¡¼¥È¥×¥ê¥ó¥¿¤ÎÀܳ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "¥×¥ê¥ó¥¿¤Ï¤½¤ì¤¾¤ì̾Á°¤¬Íפê¤Þ¤¹¡Ê¤¿¤È¤¨¤Ðlp)¡£\n"
-#~ "¤Û¤«¤Ë¤â¡¢¥×¥ê¥ó¥¿¤Î¼ïÎà¤ä¥Þ¥·¥ó¤Ø¤Î¤Ä¤Ê¤¬¤ê¤«¤¿¤Ê¤É¤Î¥Ñ¥é¥á¡¼¥¿¤¬\n"
-#~ "ÀßÄê¤Ç¤­¤Þ¤¹¡£¤³¤Î¥×¥ê¥ó¥¿¤Ï¤Ê¤ó¤È¤¤¤¦Ì¾Á°¤Ë¤·¤Þ¤¹¤«¡© ¤½¤·¤Æ¥Þ¥·¥ó¤È¤Ï¤É"
-#~ "¤¦¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "¤¢¤é¤æ¤ë¥×¥ê¥ó¥È¥­¥å¡¼(¥×¥ê¥ó¥È¥¸¥ç¥Ö¤¬´ÉÍý¤µ¤ì¤ë)¤Ï̾Á°(¤¿¤¤¤Æ¤¤¤Ï\n"
-#~ " lp)¤È¤½¤ì¤Ë´ØÏ¢¤·¤Æ¤¤¤ë¥¹¥×¡¼¥ë¥Ç¥£¥ì¥¯¥È¥ê¤¬É¬ÍפǤ¹¡£¤³¤Î¥­¥å¡¼¤Ç\n"
-#~ "»È¤¦Ì¾Á°¤È¥Ç¥£¥ì¥¯¥È¥ê¤Ï²¿¤Ë¤·¤Þ¤¹¤«¡©\n"
-#~ "¤Þ¤¿¥×¥ê¥ó¥¿¤Ï¤É¤¦Àܳ¤µ¤ì¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid "Name of queue"
-#~ msgstr "¥­¥å¡¼¤Î̾Á°¡§"
-
-#~ msgid "Spool directory"
-#~ msgstr "¥¹¥×¡¼¥ë¤Î¥Ç¥£¥ì¥¯¥È¥ê¡§"
-
-#~ msgid "Disable"
-#~ msgstr "̵¸ú¤Ë"
-
-#~ msgid "Enable"
-#~ msgstr "Í­¸ú¤Ë"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "¹â¥»¥­¥å¥ê¥Æ¥£¥·¥¹¥Æ¥à¤Ë¤·¤¿¤±¤ì¤Ð¡¢¡Ö¥·¥ã¥É¥¦¥Õ¥¡¥¤¥ë¤ò»È¤¦¡×¤È\n"
-#~ "¡ÖMD5 ¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "¤â¤·¥Í¥Ã¥È¥ï¡¼¥¯¤Ç NIS ¤ò»È¤Ã¤Æ¤¤¤ë¤Ê¤é¡ÖNIS ¤ò»È¤¦¡×¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "¤ï¤«¤é¤Ê¤±¤ì¤Ð¥Í¥Ã¥È¥ï¡¼¥¯´ÉÍý¼Ô¤Ë¤­¤¤¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "yellow pages"
-#~ msgstr "¥¤¥¨¥í¡¼¥Ú¡¼¥¸"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "¥×¥í¥Ð¥¤¥À¤Î dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "¥×¥í¥Ð¥¤¥À¤Î dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "¤É¤Î¤è¤¦¤Ë¤·¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤·¤Þ¤¹¤«?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "¥Õ¥©¡¼¥¯ÉÔ²Äǽ¡§"
-
-#~ msgid "Configure..."
-#~ msgstr "ÀßÄêÃæ..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Áª¤Ð¤ì¤¿¥µ¥¤¥º¡§%d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Àܳ¤ò³«»Ï..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "¤³¤Îµ¯Æ°¥¹¥¯¥ê¥×¥È¤ÏUSB¥Þ¥¦¥¹ÍѤΥ⥸¥å¡¼¥ë¤ò¥í¡¼¥É¤·¤Þ¤¹¡£"
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Lilo ¤ÎÀßÄê/Grub"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "µ¯Æ°Êý¼°¤ÎÀßÄê"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "¤µ¤¢¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ÎÀßÄ꤬½ª¤ï¤ê¤Þ¤·¤¿¡£¤Û¤«¤Î¥Þ¥·¥ó¤¬\n"
-#~ "¤³¤Î¥Þ¥·¥ó·Ðͳ¤Ç¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤¹¤ë¤è¤¦¤ËÀßÄê¤Ç¤­¤Þ¤¹\n"
-#~ "Ãí¡§¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯ (LAN) ¤ò¤Ä¤¯¤ë¤Ë¤Ï¡¢ÀìÍѤΥͥåȥ¥¯¥¢¥À"
-#~ "¥×¥¿¤¬Íפê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Î¶¦Í­¤òÀßÄꤷ¤Þ¤¹¤«¡©\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¶¦Í­¥æ¡¼¥Æ¥£¥ê¥Æ¥£¤Ø¤è¤¦¤³¤½¡ª"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "°Í¸´Ø·¸¤Î¼«Æ°²ò·è"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB ¤ÎÀßÄê"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "µ¯Æ°¥Ç¥£¥¹¥¯ºîÀ®"
-
-#~ msgid "Choice"
-#~ msgstr "ÁªÂò"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "¿åÊ¿¤Ç¤­¤ì¤¤¤Ë¸«¤¨¤ëaurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "½¾Íè·¿¤Î¿âľ¤Ê aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "g¥â¥Ë¥¿"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "¤Ç¤Ï¤½¤Î¾¤Î¥ª¥×¥·¥ç¥ó¤ò¤¤¤¯¤Ä¤«ÀßÄꤷ¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "  - ¥Ï¡¼¥É¥Ç¥£¥¹¥¯ºÇŬ²½¤ò¤¹¤ë: ¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯À­Ç½\n"
-#~ "    ¤ò²þÁ±¤·¤Æ¤¯¤ì¤Þ¤¹¤¬¡¢¹âÅ٤ʥ桼¥¶ÀìÍѤǤ¹¡£°ìÉô¤Î¥Á¥Ã¥×¥»¥Ã¥È¤À¤È\n"
-#~ "    ¥Ç¥£¥¹¥¯¾å¤Î¥Ç¡¼¥¿¤¬²õ¤ì¤Þ¤¹¡£¥«¡¼¥Í¥ë¤Ç¤â¡¢º¤¤Ã¤¿¥Á¥Ã¥×¥»¥Ã¥È¤ä\n"
-#~ "    ¥É¥é¥¤¥Ö¤Î¥Ö¥é¥Ã¥¯¥ê¥¹¥È¤Ï»ý¤Ã¤Æ¤¤¤Þ¤¹¤¬¡¢Äˤ¤Ìܤˤ¢¤¤¤¿¤¯¤Ê¤±¤ì¤Ð\n"
-#~ "    Èò¤±¤¿¤Û¤¦¤¬ÌµÆñ¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤ÎÁªÂò: ¥·¥¹¥Æ¥à¤Î¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤òÁª¤Ù¤Þ¤¹¡£\n"
-#~ "    ¾Ü¤·¤¯¤Ï¥Þ¥Ë¥å¥¢¥ë¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£´ðËÜŪ¤Ë¤Ï¡¢¤è¤¯¤ï¤«¤é¤Ê¤±¤ì\n"
-#~ "    ¤Ð¥Ç¥Õ¥©¥ë¥È¤Î¤Þ¤Þ¤Ç¤¤¤­¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ɬÍפʤéÀµ³Î¤ÊRAM¥µ¥¤¥º: »ÄÇ°¤Ê¤¬¤é¤¤¤Þ¤Î¥Ñ¥½¥³¥ó¤ÎÀ¤³¦¤Ç¤Ï¡¢BIOS¤Ë\n"
-#~ "    ¥·¥¹¥Æ¥à¾å¤ÎRAM¤ÎÎ̤ˤĤ¤¤Æ¤Þ¤È¤â¤Ëʹ¤¯ÊýË¡¤¬¤¢¤ê¤Þ¤»¤ó¡£¤³¤Î·ë²Ì¡¢\n"
-#~ "    Linux¤Ï¥Þ¥·¥ó¾å¤ÎRAM¤ò¤­¤Á¤ó¤È¸¡½Ð¤Ç¤­¤Ê¤¤¤³¤È¤¬¤¢¤ê¤Þ¤¹¡£¤³¤Î¾ì¹ç\n"
-#~ "    ¤Ë¤Ï¡¢Àµ¤·¤¤Î̤ò»ØÄꤷ¤Þ¤¹¡£\n"
-#~ "    Ãí°Õ¡§ 2 or 4 MB ¤¯¤é¤¤¤Î¤º¤ì¤Ïµ¤¤Ë¤·¤Ê¤¯¤ÆÂç¾æÉפǤ¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥ê¥à¡¼¥Ð¥Ö¥ë¥á¥Ç¥£¥¢¤Î¼«Æ°¥Þ¥¦¥ó¥È: ¥ê¥à¡¼¥Ð¥Ö¥ë¥É¥é¥¤¥Ö¡ÊCD-ROM¤ä\n"
-#~ "    ¥Õ¥í¥Ã¥Ô¡¼¡¢ZIP¤Ê¤É¡Ë¤ò¡Ömount¡×¤ä¡Öumount¡×¥³¥Þ¥ó¥É¤Ç¼êÆ°¥Þ¥¦¥ó¥È\n"
-#~ "    ¤¹¤ë¤Î¤¬ÌÌÅݤʤ顢¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "* µ¯Æ°¤Î¤¿¤Ó¤Ë¡Ö/tmp¡×¤ò¶õ¤Ë: ¤â¤·¥·¥¹¥Æ¥à¤òµ¯Æ°¤¹¤ë¤¿¤Ó¤Ë¡Ö/tmp¡×¤Î\n"
-#~ "¥Õ¥¡¥¤¥ë¤ä¥Ç¥£¥ì¥¯¥È¥ê¤ò¾Ãµî¤¹¤ë¤Ë¤Ï¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - µ¯Æ°»þ¤ËNum Lock¤ò¥ª¥ó¤Ë¤¹¤ë: µ¯Æ°»þ¤ËNumber Lock¤ò¥ª¥ó¤Ë¤·¤¿¤±¤ì¤Ð\n"
-#~ "    ¤³¤Î¥ª¥×¥·¥ç¥ó¤òÁª¤Ó¤Þ¤¹¡ÊÃí°Õ¡§¥é¥Ã¥×¥È¥Ã¥×¤Ç¤Ï¡¢¤³¤Î¥ª¥×¥·¥ç¥ó¤ò\n"
-#~ "    ¥ª¥ó¤Ë¤·¤Æ¤Ï¤¤¤±¤Þ¤»¤ó¡£¤Þ¤¿¡¢X¥¦¥£¥ó¥É¥¦¤Ç¤ÏNum Lock¤Ï»È¤¨¤Ê¤¤¤³\n"
-#~ "    ¤È¤¬¤¢¤ê¤Þ¤¹¡Ë¡£"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "¤´¤á¤ó¤Ê¤µ¤¤¡¢¥á¡¼¥ë¤ÎÀßÄê¤Ï¤Þ¤À¤Ç¤­¤Þ¤»¤ó¡£¤´ÍƼϤò¡£"
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄꥦ¥£¥¶¡¼¥É¤Ø¤è¤¦¤³¤½¡£\n"
-#~ "¤É¤Î¥³¥ó¥Ý¡¼¥Í¥ó¥È¤òÀßÄꤷ¤¿¤¤¤Ç¤¹¤«?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È/¥Í¥Ã¥È¥ï¡¼¥¯¤Ø¤Î¥¢¥¯¥»¥¹"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "¤½¤Î¾¤â¤í¤â¤í"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "¤½¤Î¾¤Î¼ÁÌä"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "¥¹¡¼¥Ñ¡¼¥Þ¥¦¥ó¥È¤Ï¹â¤¤¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤Ç¤Ï»È¤¨¤Þ¤»¤ó"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Ãí°Õ: ¤³¤Î¥»¥­¥å¥ê¥Æ¥£¥ì¥Ù¥ë¤Ç¤Ï¡¢¥³¥ó¥½¡¼¥ë¤Ç¤Î¥ë¡¼¥È¥í¥°¥¤¥ó¤Ï\n"
-#~ "µö²Ä¤µ¤ì¤Þ¤»¤ó¡ª\n"
-#~ "root ¤Ë¤Ê¤ê¤¿¤¤¤È¤­¤Ï¡¢¥æ¡¼¥¶¤Ç¥í¥°¥¤¥ó¤·¤Æ¡Ösu¡×¤ò»È¤¦É¬Íפ¬¤¢¤ê¤Þ¤¹¡£\n"
-#~ "°ìÈÌŪ¤Ë¤Ï¡¢¥µ¡¼¥Ð¤ò½ü¤¯²¿¤«¤¬¥Þ¥·¥ó¤ò»È¤¨¤ë¤È´üÂÔ¤µ¤»¤Ê¤¤¤¿¤á¤Ç¤¹¡£\n"
-#~ "·Ù¹ð¤·¤Þ¤·¤¿¤è¡£"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Ãí°Õ¡¢numlock ¤òÍ­¸ú¤Ë¤¹¤ë¤È¡¢¤¤¤¯¤Ä¤«¤Î¥­¡¼¥¹¥È¥í¡¼¥¯¤ÏÉáÄ̤Îʸ»ú\n"
-#~ "¤Î¤«¤ï¤ê¤Ë¿ô»ú¤òÊÖ¤·¤Þ¤¹(Î㡧¡Öp¡×¤òÂǤĤȡÖ6¡×¤òÊÖ¤·¤Þ¤¹)"
-
-#~ msgid "not connected"
-#~ msgstr "Àܳ¤µ¤ì¤Æ¤¤¤Þ¤»¤ó"
-
-#~ msgid "Actions"
-#~ msgstr "¤Õ¤ë¤Þ¤¤"
-
-#~ msgid "Scientific applications"
-#~ msgstr "²Ê³Ø¥¢¥×¥ê¥±¡¼¥·¥ç¥ó"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "¥µ¡¼¥Ð¡¢¥Õ¥¡¥¤¥ë/°õºþ/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "¥µ¡¼¥Ð¡¢DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "¥Õ¥¡¡¼¥¹¥È DNS ¥µ¡¼¥Ð"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "¥»¥«¥ó¥É DNS ¥µ¡¼¥Ð"
-
-#~ msgid "using module"
-#~ msgstr "¥â¥¸¥å¡¼¥ë¤ò»ÈÍÑ"
-
-#~ msgid "Development, Database"
-#~ msgstr "¥Ç¡¼¥¿¥Ù¡¼¥¹³«È¯ÍÑ"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "³«È¯¡¢Åý¹ç´Ä¶­"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "³«È¯ÍÑ¡¢É¸½à¥Ä¡¼¥ë"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "·Ù¹ð:\n"
-#~ "¼Â¹ÔÃæ¤ËÊѹ¹¤òŬÍѤ¹¤ë¤È¡¢X ´Ä¶­¤¬¥¯¥é¥Ã¥·¥å¤¹¤ë¤«¤â¤·¤ì¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "³¤±¤ë¤Ê¤é¡¢%s ´Ä¶­¤ò¥·¥ã¥Ã¥È¥À¥¦¥ó¤·¤Þ¤¹"
-
-#~ msgid "eth%s"
-#~ msgstr "eth%s"
-
-#~ msgid "loopback"
-#~ msgstr "¥ë¡¼¥×¥Ð¥Ã¥¯"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "¤É¤Î¥Ö¡¼¥È¥í¡¼¥À¤ò»È¤¤¤Þ¤¹¤«"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "ƳÆþÀßÄê¥Õ¥í¥Ã¥Ô"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "¥â¥Ç¥à¤ò¸¡º÷¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "ISDN Àܳ¤ÎÀßÄê"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ò̵¸ú¤Ë¤¹¤ë"
-
-#~ msgid "Configure local network"
-#~ msgstr "LAN ÀßÄê"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳÀßÄê¡¿LAN ÀßÄê"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "¥í¡¼¥«¥ë¥Í¥Ã¥È¥ï¡¼¥¯¤ÏÀßÄêºÑ¤ß¤Ç¤¹¡£\n"
-#~ "°Ê²¼¤ò¤·¤¿¤¤¤Ç¤¹¤«¡§"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "¥¦¥£¥¶¡¼¥É¤ò»È¤Ã¤ÆÀßÄêÃæ..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "²èÁüÁàºî"
-
-#~ msgid "Multimedia"
-#~ msgstr "¥Þ¥ë¥Á¥á¥Ç¥£¥¢"
-
-#~ msgid "Sciences"
-#~ msgstr "²Ê³Ø"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "xchat, licq, gaim¤Ê¤É¤Î¥Á¥ã¥Ã¥ÈÍÑ¥½¥Õ¥È (IRC ¤ä¥¤¥ó¥¹¥¿¥ó¥È¥á¥Ã¥»¡¼¥¸) ¤È"
-#~ "¥Õ¥¡¥¤¥ëžÁ÷¥Ä¡¼¥ë"
-
-#~ msgid "Communication facilities"
-#~ msgstr "ÄÌ¿®´ØÏ¢"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¥Ä¡¼¥ë"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "¥Ç¡¼¥¿¥Ù¡¼¥¹¥¯¥é¥¤¥¢¥ó¥È¤È¥µ¡¼¥Ð (mysql, postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "³«È¯ÍÑ C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "¥¿¥¤¥à¥¾¡¼¥óÀßÄê"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿ 1¡Êeth0¡Ë"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "¡Ê¥Ç¡¼¥¿¤¬²õ¤ì¤ë¤ª¤½¤ì¤¬¤¢¤ê¤Þ¤¹¡Ë"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "µ¯Æ°»þ¤Ënum lock¤ò¥ª¥ó¤Ë¤¹¤ë"
-
-#~ msgid "Confirm Password"
-#~ msgstr "¥Ñ¥¹¥ï¡¼¥É¤ÎÀßÄê"
-
-#~ msgid "DNS server:"
-#~ msgstr "DNS ¥µ¡¼¥Ð:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "¥²¡¼¥È¥¦¥§¥¤¥Ç¥Ð¥¤¥¹:"
-
-#~ msgid "default"
-#~ msgstr "¥Ç¥Õ¥©¥ë¥È"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "¥·¥¹¥Æ¥à¤Î»È¤¤Êý¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥µ¥¤¥º¤òÁª¤ó¤Ç²¼¤µ¤¤"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "diskdrake¤ò»È¤¦"
-
-#~ msgid "Customized"
-#~ msgstr "¥«¥¹¥¿¥Þ¥¤¥º"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "¤¢¤Ê¤¿¡¢ËÜÅö¤Ë¥Û¥ó¥È¤Î¥¨¥­¥¹¥Ñ¡¼¥È¤Ç¤·¤ç¤¦¤Í¤§¡£\n"
-#~ "¤³¤ì¤òÁª¤Ö¤È¡¢¶¯ÎϤʤÀ¤±¤Ë¤¨¤é¤¯´í¸±¤Ê¤Þ¤Í¤¬¤Ç¤­¤Á¤ã¤¤¤Þ¤¹¤è¡£\n"
-#~ "¡Ö¥Ñ¥¹¥ï¡¼¥É¤ò¥·¥ã¥É¥¦¤Ë¤·¤Þ¤¹¤«¡×¤È¤¤¤Ã¤¿¼ÁÌä¤ò¿Ö¤«¤ì¤Þ¤¹¡£ ¤³¤Î¤è¤¦¤Ê¼Á"
-#~ "Ìä¤Ë¥Û¥ó¥È¤ËÅú¤¨¤é¤ì¤ë¤ó¤Ç¤¹¤«¡£"
-
-#~ msgid "Use shadow file"
-#~ msgstr "¥·¥ã¥É¥¦¥Õ¥¡¥¤¥ë¤ò»È¤¦"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "MD5 ¥Ñ¥¹¥ï¡¼¥É¤ò»È¤¦"
-
-#~ msgid "Search"
-#~ msgstr "¸¡º÷"
-
-#~ msgid "Package"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸"
-
-#~ msgid "Tree"
-#~ msgstr "¥Ä¥ê¡¼"
-
-#~ msgid "Sort by"
-#~ msgstr "°Ê²¼¤Î¥­¡¼¤Ç¥½¡¼¥È¡§"
-
-#~ msgid "Category"
-#~ msgstr "¼ïÎà"
-
-#~ msgid "Installed packages"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¤Î¥Ñ¥Ã¥±¡¼¥¸"
-
-#~ msgid "Available packages"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤Ê¤¤¥Ñ¥Ã¥±¡¼¥¸"
-
-#~ msgid "Show only leaves"
-#~ msgstr "¾ÜºÙÉôʬ¤À¤±É½¼¨"
-
-#~ msgid "Expand all"
-#~ msgstr "¥Ä¥ê¡¼¤ò´°Á´¤Ë¤Î¤Ð¤·¤­¤ë"
-
-#~ msgid "Collapse all"
-#~ msgstr "¥Ä¥ê¡¼¤ò´°Á´¤Ë½Ì¤á¤ë"
-
-#~ msgid "Add location of packages"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î°ÌÃÖ¤òÄɲÃɽ¼¨"
-
-#~ msgid "Update location"
-#~ msgstr "¥¢¥Ã¥×¥Ç¡¼¥È¤¹¤ë°ÌÃÖ"
-
-#~ msgid "Find Package"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î¸¡º÷"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "°Ê²¼¤Î¥Õ¥¡¥¤¥ë¤ò´Þ¤à¥Ñ¥Ã¥±¡¼¥¸¤Î¸¡º÷¡§"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ëºÑ¤ß¤È̤¥¤¥ó¥¹¥È¡¼¥ë¤òÀÚ¤êÂؤ¨"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "¥Ñ¥Ã¥±¡¼¥¸¤Î°Í¸´Ø·¸¤òÄ´¤Ù¤Æ¤¤¤Þ¤¹"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "°Ê²¼¤Î¥Ñ¥Ã¥±¡¼¥¸¤Ï¥¢¥ó¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó"
-
-#~ msgid "Regexp"
-#~ msgstr "Àµµ¬É½¸½"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "¤É¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹¤«"
-
-#~ msgid "No match"
-#~ msgstr "°ìÃפ¹¤ë¤â¤Î¤¬¤¢¤ê¤Þ¤»¤ó"
-
-#~ msgid "No more match"
-#~ msgstr "¤³¤ì°Ê¾å¤Ï¤ß¤Ä¤«¤ê¤Þ¤»¤ó"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake ¤Ï¸½ºß¡¢¥á¥â¥êÉÔ­¤Ë¤Ê¤Ã¤Æ¤¤¤Þ¤¹¡£\n"
-#~ "°ì²órpmdrake¤ò¤¿¤Á¤¢¤²¤Ê¤ª¤·¤Æ¡¢¥Õ¥¡¥¤¥ë¤Î¸¡º÷¤ò³¤±¤Þ¤¹¤Í"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "¤É¤Î¥Õ¥¡¥¤¥ë¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹¤«"
-
-#~ msgid "What are looking for?"
-#~ msgstr "¤Ê¤Ë¤ò¤µ¤¬¤·¤Æ¤¤¤Þ¤¹¤«"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "̾Á°¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤¡ÊÎ㡧¡Ö¥¨¥­¥¹¥È¥é¡×¡Ö¾¦ÍѡסË"
-
-#~ msgid "Directory"
-#~ msgstr "¥Ç¥£¥ì¥¯¥È¥ê"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CDROM¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡Ê/mnt/cdrom¤Ë¤Ê¤Ë¤â¤¢¤ê¤Þ¤»¤ó¡Ë"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "RPM¥Ñ¥Ã¥±¡¼¥¸¤Î¤¢¤ë¥Ç¥£¥ì¥¯¥È¥ê¤ÎURL"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ¤È HTTP¤Ë¤Ä¤¤¤Æ¤Ï¡¢hdlist¤Î°ÌÃÖ¤ò»ØÄꤷ¤Ê¤¯¤Æ¤Ï¤Ê¤ê¤Þ¤»¤ó¡£\n"
-#~ "¾å¤ÎURL¤È¤ÎÁêÂаÌÃ֤ǻØÄꤷ¤Þ¤¹"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "°Ê²¼¤Î¾ðÊó¤òÆþÎϤ·¤Æ¤¯¤À¤µ¤¤"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ¤Ï¤¹¤Ç¤Ë»È¤ï¤ì¤Æ¤¤¤Þ¤¹"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "RPM¤Î¥Ù¡¼¥¹¤ò¹¹¿·Ãæ"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "¥¨¥ó¥È¥ê %s ¤ò¾Ã¤·¤Þ¤¹"
-
-#~ msgid "Finding leaves"
-#~ msgstr "¥Ä¥ê¡¼¤Î¾ÜºÙ¤ò¸¡º÷Ãæ"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "¥Ä¥ê¡¼¤Î¾ÜºÙ¤ò¸«¤Ä¤±¤ë¤Î¤Ï»þ´Ö¤¬¤«¤«¤ê¤Þ¤¹"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "ISDN¥«¡¼¥É¤ò¤ß¤Ä¤±¤Þ¤·¤¿:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "¾¤Î¹ñ"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "¤¢¤Ê¤¿¤¬¤¤¤ë¤Î¤Ï¤É¤Î¹ñ¤Ç¤¹¤«¡©"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel¥â¥Ç¥à"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI ¥â¥Ç¥à"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "¤â¤·adsl¥â¥Ç¥à¤¬alcatelÀ½¤Ê¤é¡¢alcatel¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤½¤¦¤Ç¤Ê¤±¤ì¤Ð\n"
-#~ "ECI ¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "pppoe¤ò»È¤ï¤Ê¤¤"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (½ÅÍ×)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (¤È¤Æ¤âÁ±¤¤)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (Á±¤¤)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "¥Þ¥¦¥¹¤Ï¤É¤Î¥·¥ê¥¢¥ë¥Ý¡¼¥È¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid "Czech"
-#~ msgstr "¥Á¥§¥³"
-
-#~ msgid "Slovakian"
-#~ msgstr "¥¹¥í¥Ð¥­¥¢"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "ipchains RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "dhcp RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "linuxconf RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "bind RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "caching-nameserver RPM ¤ò urpmi ¤Ç¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "The system is now connected to Internet! Congratulation.\n"
-#~ "Feel free to launch draknet at any time to setup your connection.\n"
-#~ msgstr ""
-#~ "¥Þ¥·¥ó¤Ï̵»ö¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ¤µ¤ì¤Þ¤·¤¿¡£¤ª¤á¤Ç¤È¤¦¡ª\n"
-#~ "ÀܳÀßÄê¤Ë¤Ï¡¢¤¤¤Ä¤Ç¤â draknet ¤òµ¯Æ°¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#~ msgid ""
-#~ "Welcome to %s the operating system chooser!\n"
-#~ "\n"
-#~ msgstr ""
-#~ "%s operating system chooser-he youkosou!\n"
-#~ "\n"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "LAN ¤òºÆÀßÄꤹ¤ë"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "¥³¥ó¥Ô¥å¡¼¥¿¤Ï¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤ò¶¦Í­¤¹¤ë¤è¤¦¤ËÀßÄê¤Ç¤­¤Þ¤¹¡£\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "ÀßÄ꤬Á´Éô½ª¤ï¤ê¤Þ¤·¤¿¡£\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "ÉáÄ̤Υâ¥Ç¥à¤Ç¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "ISDN¤ò»È¤Ã¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "DSL(¤Þ¤¿¤ÏADSL)¤ò»È¤Ã¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "¥±¡¼¥Ö¥ë¤ò»È¤Ã¤Æ¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤ËÀܳ"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "°ìÄê»þ´Ö¡ÊÉá˳èÆ°¤¬¤Ê¤¤¤È¡¢¼«Æ°Åª¤ËÅÅÏäòÀÚ¤ê¤Þ¤¹¡£\n"
-#~ "Éÿô¤ò»ØÄꤷ¤Þ¤·¤ç¤¦ (¼«Æ°ÀÚÃǤ·¤¿¤¯¤Ê¤±¤ì¤Ð¶õÇò¤Î¤Þ¤Þ¡Ë"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "¥É¥¤¥Ä (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "¤É¤¦¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¡¿¥ì¥¹¥­¥å¡¼"
-
-#~ msgid "Rescue"
-#~ msgstr "¥ì¥¹¥­¥å¡¼"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¥¿¥¤¥×¤Ë¤·¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "GNU/Linux¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤«¡¢Ê£¿ô¤Î¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¤ä\n"
-#~ "¥Ð¡¼¥¸¥ç¥ó¤È¶¦Â¸¤µ¤»¤¿¤¤¤È¤­¤Ë¤Ï¡¢¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "¤¹¤Ç¤Ë¥¤¥ó¥¹¥È¡¼¥ë¤º¤ß¤ÎMandrake Linux¤òµßºÑ¤·¤¿¤¤¤Ê¤é¡¢¡Ö¥ì¥¹¥­¥å¡¼¡×¤ò\n"
-#~ "Áª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "ÁªÂò¤ÎÌÜ°Â:\n"
-#~ "\n"
-#~ "  - Á´¼«Æ°(¿ä¾©): GNU/Linux¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤Ê¤é¡¢¤³¤ì¤òÁª¤Ó¤Þ¤·¤ç"
-#~ "¤¦¡£\n"
-#~ "\n"
-#~ "  - ¥«¥¹¥¿¥Þ¥¤¥º: GNU/Linux ¤Ë¾Ü¤·¤±¤ì¤Ð¡¢¼«Ê¬¤Î¥Þ¥·¥ó¤Î¼ç¤Ê»È¤¤Êý¤Ë\n"
-#~ "    ¤¢¤ï¤»¤ÆÁª¤Ó¤Þ¤·¤ç¤¦¡£¾Ü¤·¤¯¤Ï°Ê²¼¤ò»²¾È¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "  - ¥¨¥­¥¹¥Ñ¡¼¥È: ¤³¤ì¤ÏËÜÅö¤ËGNU/Linux¤Ë¾Ü¤·¤¤¿Í¤¬¡¢Èó¾ï¤ËÆüì¤Ê\n"
-#~ "    ¥¤¥ó¥¹¥È¡¼¥ë¤ò¤·¤¿¤¤¾ì¹ç¤ËÁª¤Ó¤Þ¤¹¡£¡Ö¥«¥¹¥¿¥Þ¥¤¥º¡×\n"
-#~ "    ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤ÈƱ¤¸¤¯¡¢¼«Ê¬¤Î¥·¥¹¥Æ¥à¤Î»È¤¤Êý¤òÁª¤Ù¤Þ¤¹¡£\n"
-#~ "    ¤Ç¤â¡¢´°Á´¤Ë¼«¿®¤¬¤Ê¤¤¤Ê¤é¡¢¡ÖÀäÂФˡפ³¤ì¤Ï»È¤ï¤Ê¤¤¤Ç¤¯¤À¤µ¤¤¡ª\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "GNU/LinuxÍѤΥѡ¼¥Æ¥£¥·¥ç¥ó¤Î½àÈ÷¤¬¤Ç¤­¤Æ¤¤¤ì¤Ð¡ÊÁ°¤Ë GNU/Linux \n"
-#~ "¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤ê¡¢\n"
-#~ "Ê̤Υ桼¥Æ¥£¥ê¥Æ¥£¤Ç¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤Ã¤¿¾ì¹ç¡Ë¡¢¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë\n"
-#~ "Mandrake Linux¥·¥¹¥Æ¥à¤ò¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¤«¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "¤â¤·¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤Ã¤Æ¤¤¤Ê¤±¤ì¤Ð¡¢¥Ï¡¼¥É¥Ç¥£¥¹¥¯¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò\n"
-#~ "¤³¤³¤Çºî¤ê¤Þ¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤È¤¤¤¦¤Î¤Ï¡¢¥³¥ó¥Ô¥å¡¼¥¿¤Î¥Ï¡¼¥É¥Ç¥£¥¹¥¯\n"
-#~ "¤òÌÜŪ¤Ë¤¢¤ï¤»¤ÆÏÀÍýŪ¤Ë¶èÀڤ뤳¤È¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¿·¤·¤¯¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¤Ê¤é¡¢¡Ö¼«Æ°³ä¤êÅö¤Æ¡×¤òÁª¤Ù¤Ð¡¢¼«Æ°Åª¤Ë\n"
-#~ "LinuxÍѤΥѡ¼¥Æ¥£¥·¥ç¥ó¤¬¤Ç¤­¤¢¤¬¤ê¤Þ¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¤Ä¤¯¤ë¥Ï¡¼¥É\n"
-#~ "¥Ç¥£¥¹¥¯¤òÁª¤Ö¤È¤­¤Ï¡¢ºÇ½é¤ÎIDE¥É¥é¥¤¥Ö¤¬¡Öhda¡×¡¢2ÈÖÌܤ¬¡Öhdb¡×¡¢ºÇ½é\n"
-#~ "¤ÎSCSI¥É¥é¥¤¥Ö¤¬¡Ösda¡×¡¢¤È¤¤¤¦¶ñ¹ç¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤è¤¯¤¢¤ë¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ÎÀÚ¤êÊý¤È¤·¤Æ¤Ï¡¢root¥Ñ¡¼¥Æ¥£¥·¥ç¥ó(/) ¤È\n"
-#~ "boot¥Ñ¡¼¥Æ¥£¥·¥ç¥ó(/boot) ¤òºî¤ê¤Þ¤¹¡£root¤Ï¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤Î\n"
-#~ "¥Ç¥£¥ì¥¯¥È¥ê¤Î¤Æ¤Ã¤Ú¤ó¤Ç¡¢/boot¤Ë¤Ï¥³¥ó¥Ô¥å¡¼¥¿¤Î¥¹¥¤¥Ã¥Á¤òÆþ¤ì¤¿\n"
-#~ "¤È¤­¤Ëµ¯Æ°¤ËɬÍפʥե¡¥¤¥ë¤¬ÃÖ¤¤¤Æ¤¢¤ë¤È¤³¤í¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤È¡¢¤Õ¤Ä¤¦¤Ï¤½¤³¤Î¥Ç¡¼¥¿¤ÏÁ´Éô¾Ã¤¨¤Æ¡¢¤â¤È¤Ë\n"
-#~ "Ìá¤ê¤Þ¤»¤ó¡£¤À¤«¤é¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÀÚ¤ë¤Î¤Ï¡¢½é¿´¼Ô¤Ë¤Ï¤ª¤Ã¤«¤Ê¤¤\n"
-#~ "¤Ç¤¹¤·¡¢¤È¤Ã¤Æ¤âµ¤Èè¤ì¤¹¤ë¤â¤Î¤Ç¤¹¡£¤½¤¦¤Ê¤é¤Ê¤¤¤è¤¦¤Ë¡¢DiskDrake\n"
-#~ "¤Ï¤³¤Î¥×¥í¥»¥¹¤ò¤Ê¤ë¤Ù¤¯´Êñ¤Ë¤·¤Þ¤¹¡£¤Þ¤º¤Ï¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó¤ò\n"
-#~ "Æɤó¤Ç¡¢Àè¤Ë¿Ê¤àÁ°¤Ë¤¸¤Ã¤¯¤êµ¤¤òÍî¤ÁÃ失¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤É¤Î¥ª¥×¥·¥ç¥ó¤â¡¢¥­¡¼¥Ü¡¼¥É¤ÇÁª¤Ù¤Þ¤¹¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤Ö¤Ë¤Ï¡¢\n"
-#~ "¥¿¥Ö¤È¾å²¼¤Î¥«¡¼¥½¥ë¥­¡¼¤ò»È¤¤¤Þ¤·¤ç¤¦¡£¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤À¤é¡¢\n"
-#~ "¼¡¤Î¥­¡¼¤¬»È¤¨¤Þ¤¹¡§\n"
-#~ "\n"
-#~ "- Ctrl-c  ¿·¤·¤¤¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºî¤ë¡Ê¶õ¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òÁª¤ó¤À¾ì¹ç¡Ë\n"
-#~ "\n"
-#~ "- Ctrl-d  ¤½¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤òºï½ü\n"
-#~ "\n"
-#~ "- Ctrl-m  ¥Þ¥¦¥ó¥È¥Ý¥¤¥ó¥È¤ÎÀßÄê\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "¿·¤·¤¯ºî¤Ã¤¿¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¤¹¤Ù¤Æ¡¢¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Ê¤¤¤È»È¤¨¤Þ¤»¤ó\n"
-#~ "¡Ê¥Õ¥©¡¼¥Þ¥Ã¥È¤È¤¤¤¦¤Î¤Ï¥Õ¥¡¥¤¥ë¥·¥¹¥Æ¥à¤ò¤Ä¤¯¤ë¤³¤È¤Ç¤¹¡Ë¡£¤µ¤é¤Ë\n"
-#~ "´û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Æ¡¢¤½¤³¤Î¥Ç¡¼¥¿¤ò¾Ãµî¤â¤Ç¤­¤Þ¤¹¡£\n"
-#~ "Ãí°Õ¡§´û¸¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ï¡¢¥Õ¥©¡¼¥Þ¥Ã¥È¤·¤Ê¤ª¤¹É¬ÍפϤ¢¤ê¤Þ¤»¤ó¡£\n"
-#~ "ÆäËÊݸ¤·¤¿¤¤¥Ç¡¼¥¿¡Ê/home ¤È /usr/local¤Ê¤É¡Ë¤¬¤¢¤ì¤Ð¡¢¥Õ¥©¡¼¥Þ¥Ã¥È\n"
-#~ "¤·¤Æ¤Ï¤¤¤±¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Áª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Æ¤¤¤Þ¤¹¡£¤³¤ì¤Ë¤Ï¿ôʬ¤«¤«¤ê¤Þ¤¹¤è¡£\n"
-#~ "´û¸¥·¥¹¥Æ¥à¤Î¥¢¥Ã¥×¥°¥ì¡¼¥É¤òÁª¤ó¤À¾ì¹ç¤Ï¡¢»öÁ°¤ËÄ´¤Ù¤ë¤³¤È¤¬Â¿¤¤¤Î\n"
-#~ "¤Ç¡¢¤â¤Ã¤È¤«¤«¤ê¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "¤â¤· DrakX ¤¬¥Þ¥¦¥¹¤ò¸«¤Ä¤±¤é¤ì¤Ê¤«¤Ã¤¿¤ê¡¢²¿¤¬Áª¤Ð¤ì¤¿¤«¥Á¥§¥Ã¥¯\n"
-#~ "¤·¤¿¤«¤Ã¤¿¤ê¤¹¤ë¤È¤­¤Ï¡¢¾å¤Ë¥Þ¥¦¥¹¤Î°ìÍ÷¤¬½Ð¤Æ¤¯¤ë¤Ï¤º¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX ¤Î¤ä¤Ã¤¿ÀßÄê¤Ç¤è¤±¤ì¤Ð¡¢¡ÖOK¡×¤ò¥¯¥ê¥Ã¥¯¤·¤Þ¤·¤ç¤¦¡£\n"
-#~ "ÀßÄ꤬¤Á¤¬¤Ã¤Æ¤¤¤¿¤é¡¢¼«Ê¬¤Î¥Þ¥¦¥¹¤Ë¤¤¤Á¤Ð¤ó\n"
-#~ "¶á¤¤¼ïÎà¤Î¥Þ¥¦¥¹¤ò¥á¥Ë¥å¡¼¤«¤éÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥·¥ê¥¢¥ë¥Þ¥¦¥¹¤ò»È¤Ã¤Æ¤¤¤ë¤È¤­¤Ë¤Ï¡¢¤½¤ì¤¬¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥·¥ê¥¢¥ë¥Ý¡¼¥È\n"
-#~ "¤â»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Ï¡¢¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯¡ÊLAN¡Ë¤«¥â¥Ç¥à¤ÎÀßÄê¤ò¤·¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "¡Ö¥í¡¼¥«¥ë LAN¡×¤òÁª¤Ö¤È¡¢DrakX ¤Ï¥Þ¥·¥ó¤Î¥¤¡¼¥µ¥Í¥Ã¥È¥¢¥À¥×¥¿¤òõ¤·\n"
-#~ "¤Þ¤¹¡£PCI¤Î¥¢¥À¥×¥¿¤Ï¼«Æ°Åª¤Ë¸«¤Ä¤«¤Ã¤ÆÀßÄꤵ¤ì¤ë¤Ï¤º¤Ç¤¹¡£\n"
-#~ "¤â¤·¤ª»È¤¤¤Î¥¢¥À¥×¥¿¤¬ISA ¤Ê¤é¡¢¼«Æ°¤Ç¤Ï¸¡½Ð¤Ç¤­¤Þ¤»¤ó¡£¤³¤Î¾ì¹ç¡¢\n"
-#~ "¤¢¤È¤«¤é°ìÍ÷ɽ¤¬½Ð¤Æ¤¯¤ë¤Î¤Ç¡¢¤½¤³¤«¤éÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "SCSI¥¢¥À¥×¥¿¤Î¾ì¹ç¡¢¤È¤ê¤¢¤¨¤º¥É¥é¥¤¥Ð¤Ë¥¢¥À¥×¥¿¤òõ¤µ¤»¤Æ¤ß¤Þ¤·¤ç¤¦¡£\n"
-#~ "¥À¥á¤Ê¤é¡¢¼«Ê¬¤Ç¥É¥é¥¤¥Ð¤Î¥ª¥×¥·¥ç¥ó¤ò»ØÄꤷ¤Þ¤¹¡£»ØÄꥪ¥×¥·¥ç¥ó¤Ï¡¢\n"
-#~ "¼«Ê¬¤Î¥Ï¡¼¥É¥¦¥§¥¢¤ÎÉÕ°ʸ½ñ¤ÇÄ´¤Ù¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤³¤Î¥Þ¥·¥ó¤¬¤¹¤Ç¤Ë´û¸¤Î¥Í¥Ã¥È¥ï¡¼¥¯¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¤Ê¤é¡¢¥Í¥Ã¥È¥ï¡¼¥¯\n"
-#~ "´ÉÍý¼Ô¤ËɬÍפʾðÊó¤ò¶µ¤ï¤Ã¤Æ¤¤¤ë¤Ï¤º¤Ç¤¹(IP ¥¢¥É¥ì¥¹¡¢¥Í¥Ã¥È¥ï¡¼¥¯¤Î\n"
-#~ "¥µ¥Ö¥Þ¥¹¥¯¡ÊÄ̾Υͥåȥޥ¹¥¯¡Ë¡¢¥Û¥¹¥È̾)¡£¼«Âð¤Ê¤É¤Ç¼«Ê¬¤À¤±¤Î¥Í¥Ã¥È\n"
-#~ "¥ï¡¼¥¯¤òºî¤í¤¦¤È¤·¤Æ¤¤¤ë¤Ê¤é¡¢¥¢¥É¥ì¥¹¤Ê¤É¤Ï¼«Ê¬¤ÇÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¡Ö¥â¥Ç¥à¤Ë¤è¤ë¥À¥¤¥¢¥ë¥¢¥Ã¥×¡×¤òÁª¤Ö¤È¡¢¥â¥Ç¥à¤Ë¤è¤ë¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ\n"
-#~ "¤¬ÀßÄꤵ¤ì¤Þ¤¹¡£DrakX ¤Ï¥â¥Ç¥à¤òõ¤·¤Þ¤¹¤¬¡¢¤³¤ì¤¬¼ºÇÔ¤·¤¿¤é¡¢¥â¥Ç¥à¤Î\n"
-#~ "¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥·¥ê¥¢¥ë¥Ý¡¼¥È¤ò¼«Ê¬¤Ç»ØÄꤷ¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux ¤Ç¤Ï¤¤¤í¤ó¤Ê¥×¥ê¥ó¥¿¤¬»È¤¨¤Þ¤¹¡£¤¬¡¢¤½¤ì¤¾¤ìÀßÄ꤬¤Á¤¬¤¤¤Þ¤¹¡£\n"
-#~ "¤¿¤À¤·¡¢°õºþ¥¹¥×¡¼¥é¤Ï¥Ç¥Õ¥©¥ë¥È¤Î¥×¥ê¥ó¥¿Ì¾¤È¤·¤Æ¡Ölp¡×¤ò»È¤¤¤Þ¤¹¡£\n"
-#~ "¤À¤«¤é¡¢lp¤È¤¤¤¦Ì¾Á°¤Î¥×¥ê¥ó¥¿¤¬°ì¤Ä¤ÏɬÍפǤ¹¡£¤Ç¤â¡¢°ì¤Ä¤Î¥×¥ê¥ó¥¿\n"
-#~ "¤ËÊ£¿ô¤Î̾Á°¤ò¤Ä¤±¤ë¤³¤È¤â¤Ç¤­¤Þ¤¹¡£¤³¤Î¤È¤­¤Ï¡Ö|¡×¤Ç¶èÀÚ¤ê¤Þ¤¹¡£\n"
-#~ "¤À¤«¤é¡¢¥×¥ê¥ó¥¿¤Ë¤ï¤«¤ê¤ä¤¹¤¤Ì¾Á°¤ò¤Ä¤±¤¿¤±¤ì¤Ð¡¢¤½¤ì¤òÀè¤Ë½ñ¤¤¤Æ\n"
-#~ "¤ª¤±¤Ð¤¹¤ß¤Þ¤¹¡£¤¿¤È¤¨¤Ð¡ÖMy Printer|lp¡×¤È¤¤¤¦¶ñ¹ç¤Ë¡£\n"
-#~ "̾Á°¤ÎÃæ¤Ë¡Ölp¡×¤¬´Þ¤Þ¤ì¤ë¥×¥ê¥ó¥¿¤¬¥Ç¥Õ¥©¥ë¥È¤Ë¤Ê¤ê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥×¥ê¥ó¥¿¤¬Ä¾ÀÜ¥³¥ó¥Ô¥å¡¼¥¿¤Ë¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ì¤Ð¡¢¡Ö¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¡×¤ò\n"
-#~ "Áª¤Ó¤Þ¤¹¡£¤³¤Î¾ì¹ç¡¢¥×¥ê¥ó¥¿¤Î¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥Ý¡¼¥È¤ò»ØÄꤷ¤Æ¡¢Å¬ÀÚ¤Ê\n"
-#~ "¥Õ¥£¥ë¥¿¤òÁª¤Ó¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¤Û¤«¤ÎUnix¥Þ¥·¥ó¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥×¥ê¥ó¥¿¤ò»È¤¦¤Ê¤é¡¢\n"
-#~ "¡Ö¥ê¥â¡¼¥È lpd¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£¤³¤ì¤ò»È¤¦¤Ë¤Ï¡¢¥æ¡¼¥¶Ì¾¤ä¥Ñ¥¹¥ï¡¼¥É¤Ï\n"
-#~ "¤¤¤ê¤Þ¤»¤ó¤¬¡¢¤½¤Î¥µ¡¼¥Ð¾å¤Î°õºþ¥­¥å¡¼¤Î̾Á°¤¬Íפê¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "SMB¥×¥ê¥ó¥¿¤ò»È¤¦¤Ê¤é¡Ê¤Ä¤Þ¤ê¥Í¥Ã¥È¥ï¡¼¥¯¾å¤Î¥¦¥£¥ó¥É¥¦¥º9x/NT¥Þ¥·¥ó\n"
-#~ "¤Ë¤Ä¤Ê¤¬¤Ã¤¿¥×¥ê¥ó¥¿¤ò»È¤¦¤È¤¤¤¦°ÕÌ£¤Ç¤¹¡Ë¡¢¤½¤Î¥Þ¥·¥ó¤ÎSMB ̾¡Ê¤³¤ì\n"
-#~ "¤ÏTCP/IP̾¤È¤ÏÊÌʪ¤Ç¤¹¡Ë¤È¡¢¾ì¹ç¤Ë¤è¤Ã¤Æ¤ÏIP¥¢¥É¥ì¥¹¤¬É¬Íפˤʤê¤Þ¤¹¡£\n"
-#~ "¤µ¤é¤Ë¥æ¡¼¥¶Ì¾¡¢¥ï¡¼¥¯¥°¥ë¡¼¥×̾¤È¥Ñ¥¹¥ï¡¼¥É¡¢¤µ¤é¤Ë¤Ï¥×¥ê¥ó¥¿Ì¾¤¬\n"
-#~ "¤Ê¤¤¤È¥×¥ê¥ó¥¿¤Ë¥¢¥¯¥»¥¹¤Ç¤­¤Þ¤»¤ó¡£NetWare ¥×¥ê¥ó¥¿¤â¡¢¥ï¡¼¥¯¥°¥ë¡¼¥×¤Ï\n"
-#~ "ÉÔÍפʤÀ¤±¤Ç¡¢¤Û¤È¤ó¤ÉƱ¤¸¤Ç¤¹¡£"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "¤³¤³¤Ç¤Ï¡Ö¤Ï¤¤¡×¤ÈÅú¤¨¤ë¤Î¤ò¶¯¤¯¿ä¾©¤·¤Þ¤¹¡£¸å¤«¤éMS¥¦¥£¥ó¥É¥¦¥º¤ò\n"
-#~ "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤é¡¢¥Ö¡¼¥È¥»¥¯¥¿¤Ï¾å½ñ¤­¤µ¤ì¤Þ¤¹¡£¤½¤¦¤Ê¤Ã¤¿¤é¡¢\n"
-#~ "¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤òºî¤Ã¤Æ¤ª¤«¤Ê¤¤¤È¡¢Linux¤¬Î©¤Á¾å¤²¤é¤ì¤Ê¤¯¤Ê¤ê¤Þ¤¹¤è¡£"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "¥Û¥¤¡¼¥ë¤ò¤Þ¤ï¤·¤Æ¤ß¤Þ¤·¤ç¤¦¡ª"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Êѹ¹¤òÁ´ÉôÇË´þ¤·¤Þ¤¹¤«¡©"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "¥Þ¥¦¥¹¤Î·¿¤Ï¤Ê¤ó¤Ç¤¹¤«¡©"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "²òÁüÅ٤μ«Æ°ÀßÄê"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Í­¸ú¤Ê²òÁüÅÙ¤òÆÀ¤ë¤¿¤á¤ËÊ̤ÎÊýË¡¤ò»î¤·¤Æ¤ß¤Þ¤¹¡£\n"
-#~ "¥¹¥¯¥ê¡¼¥ó¤¬ÌÀÌǤ·¤Þ¤¹...\n"
-#~ "¤¤¤ä¤Ê¤é¥â¥Ë¥¿¤Î¥¹¥¤¥Ã¥Á¤òÀڤäƤâ¤À¤¤¤¸¤ç¤¦¤Ö¡£½ª¤ï¤Ã¤¿¤é beep ²»\n"
-#~ "¤ÇÃΤ餻¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Í­¸ú¤Ê²òÁüÅÙ(Îã: 800x600)¤ò¼«Æ°Åª¤Ëõ¤»¤Þ¤¹¡£\n"
-#~ "¤¬¡¢¤³¤ì¤Ç¥Þ¥·¥ó¤¬»ß¤Þ¤Ã¤Æ¤·¤Þ¤¦¤«¤â¤·¤ì¤Þ¤»¤ó¡£\n"
-#~ "õ¤·¤Æ¤ß¤Þ¤·¤ç¤¦¤«¡©"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Í­¸ú¤Ê¥â¡¼¥É¤¬¸«ÉÕ¤«¤ê¤Þ¤»¤ó\n"
-#~ "¾¤Î¥Ó¥Ç¥ª¥«¡¼¥É/¥â¥Ë¥¿¤Ç»î¤·¤Æ²¼¤µ¤¤¡£"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "²òÁüÅ٤μ«Æ°¸¡º÷"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB ¥Þ¥¦¥¹"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB ¥Þ¥¦¥¹¡Ê2¥Ü¥¿¥ó¡Ë"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB ¥Þ¥¦¥¹¡Ê3¥Ü¥¿¥ó°Ê¾å¡Ë"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB¥Þ¥¦¥¹"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB¥Þ¥¦¥¹¡Ê2¥Ü¥¿¥ó¡Ë"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB¥Þ¥¦¥¹¡Ê3¥Ü¥¿¥ó°Ê¾å¡Ë"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI ¥Ð¥¹¥Þ¥¦¥¹"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "¥Þ¥¤¥¯¥í¥½¥Õ¥È¡¦¥Ð¥¹¥Þ¥¦¥¹"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "¥í¥¸¥Æ¥Ã¥¯¡¦¥Ð¥¹¥Þ¥¦¥¹"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB¥Þ¥¦¥¹¡Ê3¥Ü¥¿¥ó°Ê¾å¡Ë"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A °Ê¾å(serial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (¥·¥ê¥¢¥ë)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (¥·¥ê¥¢¥ë)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (¥·¥ê¥¢¥ë)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "ÈÆÍÑ¥Þ¥¦¥¹ (¥·¥ê¥¢¥ë)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "¥Þ¥¤¥¯¥í¥½¥Õ¥È¸ß´¹¡Ê¥·¥ê¥¢¥ë¡Ë"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "ÈÆÍѤÎ3¥Ü¥¿¥ó¥Þ¥¦¥¹ (¥·¥ê¥¢¥ë)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (¥·¥ê¥¢¥ë)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥ÈÀܳ¤Ë¤Ï¡¢¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤òÀßÄꤹ¤ëɬÍפ¬¤¢¤ê¤Þ¤¹¡£"
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¤Ë¤Ä¤Ê¤°¤¿¤á¤Î¥Í¥Ã¥È¥ï¡¼¥¯¥¢¥À¥×¥¿¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "¤ï¤«¤é¤Ê¤±¤ì¤Ð¡¢eth0 ¤òÁª¤ó¤Ç¤ª¤­¤Þ¤·¤ç¤¦¡£\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs ¥Þ¥¦¥ó¥È¤Ë¼ºÇÔ"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX ¤Ï¡¢XFree 3.3¤ÈXFree 4.0ξÊý¤ÎÀßÄê¥Õ¥¡¥¤¥ë¤ò¤Ä¤¯¤ê¤Þ¤¹¡£¤Ç¤â\n"
-#~ "¥Ç¥Õ¥©¥ë¥È¤Ç¤ÏÂбþ¥Ó¥Ç¥ª¥«¡¼¥É¤¬Ìµ¤¤¸Â¤ê¡¢4.0¥µ¡¼¥Ð¤Î¤Û¤¦¤ò»È¤¤¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "XFree 3.3 ¤Î¤Þ¤Þ¤Ë¤·¤Æ¤ª¤­¤Þ¤¹¤«?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "°Å¹æ²½"
-
-#~ msgid "Configure LAN"
-#~ msgstr "LAN ¤ÎÀßÄê"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯ÀßÄê¤ò¤·¤Ê¤¤"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "¥·¥¹¥Æ¥à¤Î¥í¡¼¥«¥ë LAN ¥Í¥Ã¥È¥ï¡¼¥¯¤òÀßÄꤷ¤Þ¤¹¤«¡©"
-
-#~ msgid "Show less"
-#~ msgstr "³µÎ¬¤Çɽ¼¨"
-
-#~ msgid "Show more"
-#~ msgstr "¾ÜºÙ¤òɽ¼¨"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "¥Ï¡¼¥É¥É¥é¥¤¥Ö¤ò°ú¤­·Ñ¤°"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¤ÎURI"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "¥Í¥Ã¥È¥ï¡¼¥¯¥×¥ê¥ó¥¿¤ÎURI"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "¥í¡¼¥«¥ë¥×¥ê¥ó¥¿¥Ç¥Ð¥¤¥¹ (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "¥×¥ê¥ó¥¿¤¬¤Ä¤Ê¤¬¤Ã¤Æ¤¤¤ë¥Ç¥Ð¥¤¥¹¤Ï²¿¤Ç¤¹¤«\n"
-#~ "(Ãí°Õ ¥Ñ¥é¥ì¥ë¤Î/dev/lp0 ¤Ï LPT1: ¤Ë¤Ê¤ê¤Þ¤¹)¡©\n"
-
-#~ msgid "Network Printer Options (URI)"
-#~ msgstr "Netware ¥×¥ê¥ó¥¿¤Î¥ª¥×¥·¥ç¥ó (URI)"
-
-#~ msgid "tie"
-#~ msgstr "¥Í¥¯¥¿¥¤"
-
-#~ msgid "brunette"
-#~ msgstr "¥Ö¥ë¥Í¥Ã¥È"
-
-#~ msgid "girl"
-#~ msgstr "½÷¤Î»Ò"
-
-#~ msgid "woman-blond"
-#~ msgstr "¥Ö¥í¥ó¥É½÷À­"
-
-#~ msgid "automagic"
-#~ msgstr "¥ª¡¼¥È¥Þ¥¸¥Ã¥¯"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "¥Û¥¹¥È¥Í¡¼¥à¤òÄ󶡤µ¤ì¤Æ¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "¥í¡¼¥«¥ë¥¨¥ê¥¢¥Í¥Ã¥È¥ï¡¼¥¯¤Î¾ÜºÙ"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "¤É¤Î¥¯¥é¥¹C¥Í¥Ã¥È¥ï¡¼¥¯¤ò»È¤¦¤«·è¤á¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "¥¤¥ó¥¿¡¼¥Í¥Ã¥È¶¦Í­Àܳ - %s ¤ÎÀßÄê"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "¼¡¤Î¥¤¥ó¥¿¡¼¥Õ¥§¡¼¥¹¤òÀßÄꤷ¤è¤¦¤È¤·¤Æ¤Þ¤¹¡§\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "Á´¤Æ¤òÀßÄꤷ¤Þ¤·¤¿¡ª"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "¥­¡¼¥Ü¡¼¥É¥ì¥¤¥¢¥¦¥È¤Ï²¿¤Ç¤¹¤«¡©"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "PCMCIA¥«¡¼¥É¤ò¤µ¤¬¤·¤Æ¤ß¤Þ¤·¤ç¤¦¤«¡©"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "%s¥Ç¥Ð¥¤¥¹¤ò¤µ¤¬¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "ºÇ¾®(%dMB)"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "¥·¥¹¥Æ¥à¤Î¥â¥Ç¥à¤Ë¤è¤ë¥À¥¤¥¢¥ë¥¢¥Ã¥×¥Í¥Ã¥È¥ï¡¼¥¯¤òÀßÄꤷ¤Þ¤¹¤«¡©"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "¥·¥¹¥Æ¥à¤ÎISDNÀܳ¤òÀßÄꤷ¤Þ¤¹¤«¡©"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "PCI¥Ç¥Ð¥¤¥¹¤ò¤µ¤¬¤·¤Æ¤ß¤Þ¤¹¤«¡©"
-
-#~ msgid "Searching root partition."
-#~ msgstr "¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¸¡º÷"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: ¤³¤ì¤Ï¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ç¤Ï¤¢¤ê¤Þ¤»¤ó¡¤¤Û¤«¤òÁª¤ó¤Ç²¼¤µ¤¤¡£"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "¤É¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤ò¥ë¡¼¥È¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤Ë¤·¤Þ¤¹¤«"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "µ¯Æ°»þ¤Î¼«Æ°¥í¥°¥¤¥ó"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "¼«Æ°¥í¥°¥¤¥ó - ¥Ç¥Õ¥©¥ë¥È¥æ¡¼¥¶¤òÁªÂò"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "¥¦¥£¥ó¥É¥¦¥º¤Î¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Linux4Win¤¬Æþ¤ë¤À¤±¤Î¶õ¤­¤¬¤¢¤ê¤Þ¤»¤ó¡ª"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "LILO operating system chooser-he youkosou!\n"
-#~ "\n"
-#~ "<TAB>: Ichiran Hyouji\n"
-#~ "\n"
-#~ "Ichiran kara erande <ENTER> wo oshimasu. %d byou de Default ni narimasu.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO ¥á¥¤¥ó¥ª¥×¥·¥ç¥ó"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO ¤Ë¤Ï°Ê²¼¤Î¥¨¥ó¥È¥ê¤¬¤¢¤ê¤Þ¤¹¡£\n"
-#~ "¤Û¤«¤Î¥¨¥ó¥È¥ê¤ò²Ã¤¨¤ë¤«Êѹ¹¤¹¤ë¤³¤È¤¬¤Ç¤­¤Þ¤¹¡£"
-
-#~ msgid "This label is already in use"
-#~ msgstr "¤³¤Î¥é¥Ù¥ë¤Ï¤¹¤Ç¤Ë»È¤ï¤ì¤Æ¤¤¤Þ¤¹"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO ¤Î¥¤¥ó¥¹¥È¡¼¥ë¤Ë¼ºÇÔ¤·¤Þ¤·¤¿¡£°Ê²¼¤Î¥¨¥é¡¼¤¬È¯À¸:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX ¤Ï¤Þ¤º¡¢PCI¥Ð¥¹¤ÎSCSI¥¢¥À¥×¥¿¤òõ¤·¤Ë¤¤¤­¤Þ¤¹¡£¥¢¥À¥×¥¿¤¬¤ß¤Ä\n"
-#~ "¤«¤Ã¤Æ¡¢»È¤¦¥É¥é¥¤¥Ð¤¬¤ï¤«¤ì¤Ð¡¢¤½¤ì¤ò¼«Æ°Åª¤ËÁȤ߹þ¤ß¤Þ¤¹¡£¥¢¥À¥×¥¿\n"
-#~ "¤¬¤¿¤¯¤µ¤ó¤¢¤Ã¤Æ¤âÂç¾æÉפǤ¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤â¤·ISA¥Ð¥¹¤ÎSCSI¥¢¥À¥×¥¿¤ò»È¤Ã¤Æ¤¤¤¿¤ê¡¢PCI¥Ð¥¹¤ÎSCSI¥¢¥À¥×¥¿¤Ç¤â\n"
-#~ "DrakX¤Ë¥É¥é¥¤¥Ð¤¬¤ï¤«¤é¤Ê¤«¤Ã¤¿¤ê¤¹¤ë¤È¤­¡¢¤Þ¤¿¤ÏSCSI¥¢¥À¥×¥¿¤¬¤Ê¤¤\n"
-#~ "¤È¤­¤Ë¤Ï¡¢¥×¥í¥ó¥×¥È¤¬½Ð¤Æ¤­¤Æ¡¢SCSI¥¢¥À¥×¥¿¤¬¤¢¤ë¤«¤É¤¦¤«¤­¤­¤Þ¤¹¡£\n"
-#~ "¤Ê¤±¤ì¤Ð¡Ö¤¤¤¤¤¨¡×¤ÈÅú¤¨¤Æ¤¯¤À¤µ¤¤¡£¤¢¤ì¤Ð¡Ö¤Ï¤¤¡×¤ÈÅú¤¨¤Þ¤·¤ç¤¦¡£\n"
-#~ "¤¹¤ë¤È¥É¥é¥¤¥Ð¤Î°ìÍ÷ɽ¤¬½Ð¤Æ¤¯¤ë¤Î¤Ç¡¢Å¬Àڤʤâ¤Î¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥É¥é¥¤¥Ð¤òÁª¤ó¤À¤é¡¢¤½¤Î¥É¥é¥¤¥Ð¤Ç¥ª¥×¥·¥ç¥ó¤ò»ØÄꤷ¤¿¤¤¤«¤É¤¦¤«¤ò\n"
-#~ "DrakX¤¬¤­¤¤¤Æ¤­¤Þ¤¹¡£ºÇ½é¤Ï¡¢¥É¥é¥¤¥Ð¤Ë¥Ï¡¼¥É¥¦¥§¥¢¤ò¥×¥í¡¼¥Ö¤µ¤»¤Æ\n"
-#~ "¤ß¤Þ¤·¤ç¤¦¡£¤¿¤¤¤¬¤¤¤Ï¤³¤ì¤Ç¤¦¤Þ¤¯¤¤¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤³¤ì¤¬¥À¥á¤Ê¤é¡¢¤½¤Î¥¢¥À¥×¥¿¤Ë¤Ä¤¤¤Æ¥É¥­¥å¥á¥ó¥Æ¡¼¥·¥ç¥ó¤Ë½ñ¤¤¤Æ¤¢¤Ã¤¿\n"
-#~ "¤³¤È¤ä¡¢¥¦¥£¥ó¥É¥¦¥º¤Î¥×¥í¥Ñ¥Æ¥£¤Î¾ðÊó¤Ê¤É¤ò»×¤¤¤À¤·¤Æ¤ß¤Þ¤·¤ç¤¦¡£¥¤¥ó\n"
-#~ "¥¹¥È¡¼¥ë¥¬¥¤¥É¤Ç¤â¡¢¤³¤ì¤ò¹µ¤¨¤Æ¤ª¤¯¤è¤¦¤Ë¤ª¾©¤á¤·¤Þ¤·¤¿¤è¤Í¡£¤½¤Î¾ðÊó\n"
-#~ "¤ò¥É¥é¥¤¥Ð¤Ë¤ï¤¿¤·¤Æ¤ä¤ë¤³¤È¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#~ msgid "Shutting down"
-#~ msgstr "¥·¥ã¥Ã¥È¥À¥¦¥óÃæ"
-
-#~ msgid "useless"
-#~ msgstr "̵ÍÑ"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "¥³¥ó¥Ô¥å¡¼¥¿¾å¤Ë¥¦¥£¥ó¥É¥¦¥º¤«¤é¤Î True Type ¥Õ¥©¥ó¥È¤ò¸«ÉÕ¤±¤Þ¤·¤¿¡£\n"
-#~ "¤³¤ì¤é¤ò»È¤¤¤Þ¤¹¤«? ¤¢¤Ê¤¿¤¬ Linux ¾å¤Ç¤³¤ì¤é¤ò»È¤¦¸¢Íø¤¬¤¢¤ë¤«¤ò³Î¤«¤á¤Æ"
-#~ "²¼¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Linux¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤«¡¢¤Û¤«¤ÎLinux¥Ç¥£¥¹¥È¥ê¥Ó¥å¡¼¥·¥ç¥ó¤ä\n"
-#~ "¥Ð¡¼¥¸¥ç¥ó¤È¶¦Â¸¤µ¤»¤¿¤¤¤È¤­¤Ë¤Ï¡¢¡Ö¥¤¥ó¥¹¥È¡¼¥ë¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000, 7.0 (Air)¤Ê¤É¡¢¸Å¤¤Mandrake Linux¤ò\n"
-#~ "¥¢¥Ã¥×¥°¥ì¡¼¥É¤¹¤ë¤Ê¤é¡Ö¥¢¥Ã¥×¥°¥ì¡¼¥É¡×¤òÁª¤Ó¤Þ¤·¤ç¤¦¡£"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "LILO ¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "¤Ç¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥Ñ¥Ã¥±¡¼¥¸¤ÎÁªÂò¤Ë°Ü¤ê¤Þ¤·¤ç¤¦¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤Þ¤º¤Ï¡¢¥¤¥ó¥¹¥È¡¼¥ë¤ä¥¢¥Ã¥×¥°¥ì¡¼¥É¤·¤¿¤¤¥Ñ¥Ã¥±¡¼¥¸¤ò¤ª¤ª¤¶¤Ã¤Ñ¤Ë\n"
-#~ "¥°¥ë¡¼¥×¤ÇÁª¤Ó¤Þ¤¹¡£¤½¤Î¸å¤Ç¡¢¥Ñ¥Ã¥±¡¼¥¸¤Î¥µ¥¤¥º¤Ê¤É¤«¤é¤â¤Ã¤ÈºÙ¤«¤¤\n"
-#~ "ÁªÂò¤¬¤Ç¤­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¥¨¥­¥¹¥Ñ¡¼¥È¡¦¥â¡¼¥É¤Ê¤é¡¢¸ÄÊ̤Υѥ屡¼¥¸¤òÁª¤Ù¤Þ¤¹¡£\n"
-#~ "¥Ñ¥Ã¥±¡¼¥¸¤ÎÃæ¤Ë¤Ï¡¢Â¾¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬¤Ê¤¤¤È»È¤¨¤Ê¤¤¤â¤Î¤¬¤¢¤ê¤Þ¤¹¡£\n"
-#~ "¤³¤ì¤ò¥Ñ¥Ã¥±¡¼¥¸¤Î°Í¸´Ø·¸¤È¤¤¤¤¤Þ¤¹¡£¤³¤³¤Ç¤Ï¥Ñ¥Ã¥±¡¼¥¸¤òÁª¤Ö¤È¡¢\n"
-#~ "¤½¤ì¤ËɬÍפʥѥ屡¼¥¸¤â¼«Æ°Åª¤ËÁª¤Ð¤ì¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤µ¤ì¤Þ¤¹¡£\n"
-#~ "°Í¸´Ø·¸¤¬´°Á´¤Ë²ò·è¤µ¤ì¤Ê¤¤¤È¡¢¥Ñ¥Ã¥±¡¼¥¸¤Ï¥¤¥ó¥¹¥È¡¼¥ë¤Ç¤­¤Þ¤»¤ó¡£"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) ¤Ï¡¢Linux¤ä¤½¤Î¾¤ÎOS¤ò¥Ö¡¼¥È¤Ç¤­¤Þ¤¹¡£\n"
-#~ "¥Ç¥£¥¹¥¯¾å¤Î³Æ¼ï¤ÎOS¤Ï¡¢ÉáÄ̤ϥ¤¥ó¥¹¥È¡¼¥ë¤ÎÃæ¤Ç¤­¤Á¤ó¤È¸¡½Ð¤µ¤ì¤Æ¤¤¤Þ"
-#~ "¤¹¡£\n"
-#~ "¤Ç¤â¸¡½Ð¤µ¤ì¤Æ¤¤¤Ê¤¤¤è¤¦¤Ê¤é¡¢¤³¤³¤ÇÄɲäǤ­¤Þ¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "¤ß¤ó¤Ê¤Ë¥¢¥¯¥»¥¹¤·¤Æ¤Û¤·¤¯¤Ê¤¤OS¤¬¤¢¤Ã¤¿¤é¡¢¤³¤³¤«¤é¤Ïºï½ü¤·¤Æ¤ª¤­¤Þ¤¹¡£\n"
-#~ "¡Ê¤½¤ÎOS¤òΩ¤Á¾å¤²¤ë¤Ë¤Ï¥Ö¡¼¥È¥Ç¥£¥¹¥¯¤¬É¬Íפˤʤê¤Þ¤¹¡Ë"
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "º£¡¢Íߤ·¤¤¥°¥ë¡¼¥×¤ÎÁªÂò¤ò¤·¤Æ¤ë¤È¤³¤í¤Ç¤¹¡£\n"
-#~ "ÁªÂò¤·¤¿¤½¤ì¤¾¤ì¤Î¥°¥ë¡¼¥×¤ÇºÇ¾®¡ÁºÇÂ祤¥ó¥¹¥È¥ì¡¼¥·¥ç¥ó¤ÎÈϰϤÇ\n"
-#~ "¤É¤Î¤¯¤é¤¤¤Î¥Ñ¥Ã¥±¡¼¥¸¤¬É¬Íפ«Áª¤ó¤Ç²¼¤µ¤¤¡£"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤Â¾¤Î CD ¤òÁªÂò"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "¤³¤ó¤ÊÊý¿Ë¤òÌܰ¤ËÁª¤ó¤Ç¤¯¤À¤µ¤¤:\n"
-#~ "\n"
-#~ "  - ¿ä¾©: Linux¤Î¥¤¥ó¥¹¥È¡¼¥ë¤¬½é¤á¤Æ¤Ê¤é¤³¤ì¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥«¥¹¥¿¥àÁªÂò: Linux¤Ë¾Ü¤·¤±¤ì¤Ð¡¢¥·¥¹¥Æ¥à¤Î»È¤¤Êý¤Ë±þ¤¸¤Æ¡Ö¥Î¡¼¥Þ"
-#~ "¥ë¡×\n"
-#~ "¡Ö³«È¯Íѡס֥µ¡¼¥Ð¡×¤ÎÃ椫¤éÁª¤Ó¤Þ¤·¤ç¤¦¡£¤Õ¤Ä¤¦¤Î¥·¥¹¥Æ¥à¤Ë¤·¤¿¤±¤ì¤Ð¡¢\n"
-#~ "¡Ö¥Î¡¼¥Þ¥ë¡×¤¬¤¤¤¤¤Ç¤·¤ç¤¦¡£¼ç¤Ë¥½¥Õ¥È³«È¯¤ò¤¹¤ë¤Ä¤â¤ê¤Ê¤é¡¢¡Ö³«È¯Íѡפò\n"
-#~ "Áª¤Ó¤Þ¤¹¡£¤¢¤ë¤¤¤Ï¡¢ÈÆÍÑ¥µ¡¼¥Ð¡Ê¥á¡¼¥ëÍÑ¡¢°õºþÍѤʤɤʤɡˤȤ·¤Æ»È¤¦¤Ê¤é\n"
-#~ "¡Ö¥µ¡¼¥Ð¡×¤¬¤ª¤¹¤¹¤á¤Ç¤¹¡£\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ¥¨¥­¥¹¥Ñ¡¼¥È¡§Expert: GNU/Linux ¥Ð¥ê¥Ð¥ê¤Ç¡¢ºÙ¤«¤¤¥«¥¹¥¿¥Þ¥¤¥º¤ò¤·¤¿\n"
-#~ "¤±¤ì¤Ð¡¢¤³¤Î¥¤¥ó¥¹¥È¡¼¥ë¤òÁª¤ó¤Ç¤¯¤À¤µ¤¤¡£¤³¤Î¤È¤­¡¢¥·¥¹¥Æ¥à¤Î»ÈÅÓ¤Ï\n"
-#~ "¡Ö¥«¥¹¥¿¥Þ¥¤¥º¡×¤Ë¤Ê¤ê¤Þ¤¹¡£"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "°Å¹æ´ØÏ¢¤Î¥Ñ¥Ã¥±¡¼¥¸¤ò¥À¥¦¥ó¥í¡¼¥ÉÃæ"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "SCSI ¤ÎÀßÄê"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "¥¤¥ó¥¹¥È¥ì¡¼¥·¥ç¥ó CD Nr %s"
-
-#~ msgid "Which language do you want?"
-#~ msgstr "¤É¤Î¸À¸ì¤ò»È¤¤¤Þ¤¹¤«¡©"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "¤É¤Î»ÈÍÑË¡¤òÁª¤Ó¤Þ¤¹¤«¡©"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "ƳÆþ/³ÈÄ¥¤ÎÁªÂò"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "¥¨¥ó¥È¥ê %s ¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "HTP ¤Î»È¤¨¤ë¥Ö¡¼¥È¥Ç¥£¥¹¥¯ÍѤΥեí¥Ã¥Ô¡¼¤ò¥É¥é¥¤¥Ö¤ËÁÞÆþ¤·¤Æ¤¯¤À¤µ¤¤\n"
-#~ "¥Õ¥í¥Ã¥Ô¡¼¾å¤ÎÁ´¤Æ¤Î¥Ç¡¼¥¿¤Ï¼º¤ï¤ì¤Þ¤¹"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "¥Õ¥í¥Ã¥Ô¡¼¤Çµ¯Æ°¤·¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "¥Ñ¥é¥á¡¼¥¿¤òÊѤ¨¤Æ¥¤¥ó¥¹¥È¡¼¥ë¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "HTP ¥Ö¡¼¥È¥Õ¥í¥Ã¥Ô¡¼¤¬¤Ä¤¯¤ì¤Þ¤»¤ó¤Ç¤·¤¿¡£\n"
-#~ "¥¤¥ó¥¹¥È¡¼¥ë¤ò¤ä¤ê¤Ê¤ª¤·¤Æ¡¢¥×¥í¥ó¥×¥È¤Ç¡È%s¡É¤ÈÆþÎϤ·¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£"
-
-#~ msgid "User name:"
-#~ msgstr "¥æ¡¼¥¶Ì¾:"
-
-#~ msgid "Password:"
-#~ msgstr "¥Ñ¥¹¥ï¡¼¥É:"
-
-#~ msgid "developer"
-#~ msgstr "³«È¯¼Ô"
-
-#~ msgid "beginner"
-#~ msgstr "½é¿´¼Ô"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "¥ê¥Ë¥¢ (SCSI ¥É¥é¥¤¥Ö¤Î°ìÉô¤ÇɬÍ×)"
-
-#~ msgid "linear"
-#~ msgstr "¥ê¥Ë¥¢"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "%s ¥Ñ¡¼¥Æ¥£¥·¥ç¥ó¤«¤é %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "¥¿¥¤¥×¤ÎÊѹ¹"
-
-#~ msgid "resizing"
-#~ msgstr "¥ê¥µ¥¤¥ºÃæ"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "¥µ¥¤¥º: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "ÉÔÀµ¤Ê¥­¥Ã¥¯¥¹¥¿¡¼¥È¥Õ¥¡¥¤¥ë %s (%s ¼ºÇÔ)"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Áª¤ó¤À¥Ñ¥Ã¥±¡¼¥¸¤¬Â¿¤¹¤®¤Þ¤¹¡£%dMB ¤¢¤ë¤Î¤Ç %dMB ¤Ë¤ª¤µ¤Þ¤ê¤Þ¤»¤ó¡£"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "%d MB ¤ò¥¤¥ó¥¹¥È¡¼¥ë¤·¤Þ¤¹¡£¤Û¤«¤Î¥×¥í¥°¥é¥à¤ò¥¤¥ó¥¹¥È¡¼¥ë½ÐÍè¤Þ¤¹"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "¥¤¥ó¥¹¥È¥ì¡¼¥·¥ç¥ó CD Nr 1"
-
-#~ msgid "Local LAN"
-#~ msgstr "¥í¡¼¥«¥ë LAN"
diff --git a/perl-install/share/po/ko.po b/perl-install/share/po/ko.po
deleted file mode 100644
index 3c0726443..000000000
--- a/perl-install/share/po/ko.po
+++ /dev/null
@@ -1,11766 +0,0 @@
-# Korean translation of DrakeX.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# sangkim@dreamwiz.com, 1999.
-# Ricky Jang <ricky@iolinux.co.kr>, 2000
-# Jaegeum Choe <baedaron@hananet.net>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 1.1.5\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-09-24 01:16--500\n"
-"Last-Translator: Jaegeum Choe <baedaron@hananet.net>\n"
-"Language-Team: Korean <baedaron@hananet.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=euc-kr\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "¸ðµç Çìµå¸¦ µ¶¸³ÀûÀ¸·Î ¼³Á¤"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama È®Àå »ç¿ë"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "¡¸%s¡¹Ä«µå¸¸ ¼³Á¤ (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "´ÙÁß Çìµå ¼³Á¤"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"´ÔÀÇ ½Ã½ºÅÛÀº ´ÙÁß Çìµå ¼³Á¤À» Áö¿øÇÕ´Ï´Ù.\n"
-"¾î¶»°Ô ÇϽðڽÀ´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "±×·¡ÇÈ Ä«µå"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "±×·¡ÇÈ Ä«µå ¼±ÅÃ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "X ¼­¹ö ¼±ÅÃ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ¼­¹ö"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "X ¼­¹ö ¼±ÅÃ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ¼­¹ö"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "¾î´À XFree ¼³Á¤À» ¼±ÅÃÇϽðڽÀ´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"´ÔÀÇ Ä«µå´Â XFree %s·Î¸¸ °¡´ÉÇÑ 3D Çϵå¿þ¾î °¡¼Ó±â´ÉÀÌ Áö¿øµË´Ï´Ù.\n"
-"´ÔÀÇ Ä«µå´Â ¾î¼¸é º¸´Ù Çâ»óµÈ 2D ¼º´ÉÀ» º¸ÀÏ ¼ö ÀÖ´Â XFree %sÀ» Áö¿øÇÕ´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "´ÔÀÇ Ä«µå´Â XFree %s·Î 3D Çϵå¿þ¾î °¡¼Ó±â´ÉÀ» Áö¿øÇÕ´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s¸¦ »ç¿ëÇÑ 3D Çϵå¿þ¾î °¡¼Ó"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"´ÔÀÇ Ä«µå´Â XFree %s·Î¸¸ °¡´ÉÇÑ 3D Çϵå¿þ¾î °¡¼Ó±â´ÉÀÌ Áö¿øµË´Ï´Ù.\n"
-"ÁÖÀÇ: ÀÌ°ÍÀº ½ÇÇèÀûÀÎ Áö¿øÀÌ¸ç ´ÔÀÇ ÄÄÇ»Å͸¦ ¸ØÃß°Ô ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s¸¦ »ç¿ëÇÑ ½ÇÇèÀû 3D Çϵå¿þ¾î °¡¼Ó"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"´ÔÀÇ Ä«µå´Â XFree %s·Î¸¸ °¡´ÉÇÑ 3D Çϵå¿þ¾î °¡¼Ó±â´ÉÀÌ Áö¿øµË´Ï´Ù.\n"
-"ÁÖÀÇ: ÀÌ°ÍÀº ½ÇÇèÀûÀÎ Áö¿øÀÌ¸ç ´ÔÀÇ ÄÄÇ»Å͸¦ ¸ØÃß°Ô ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"´ÔÀÇ Ä«µå´Â ¾î¼¸é º¸´Ù Çâ»óµÈ 2D ¼º´ÉÀ» º¸ÀÏ ¼ö ÀÖ´Â XFree %sÀ» Áö¿øÇÕ´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (¼³Ä¡ Ç¥½Ã µå¶óÀ̹ö)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree ¼³Á¤"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "±×·¡ÇÈ Ä«µåÀÇ ¸Þ¸ð¸® ¿ë·®À» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "¼­¹ö ¿É¼ÇÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "¸ð´ÏÅ͸¦ ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"¼öÁ÷ ±×¸®°í ´õ¿í Áß¿äÇÑ ¼öÆò ÁÖÆļö¶ó´Â µÎ °³ÀÇ Áß¿äÇÑ ÀÎÀÚ°¡ ÀÖ½À´Ï´Ù. ¼öÁ÷ "
-"ÁÖÆļö´Â \n"
-"Àüüȭ¸éÀÌ °»½ÅµÇ´Â ÁÖ±âÀ̸ç, ¼öÆò ÁÖÆļö´Â ½ºÄµ¶óÀεéÀÌ °»½ÅµÇ´Â ÁÖ±âÀÔ´Ï"
-"´Ù.\n"
-"\n"
-"¸Å¿ì Áß¿ä: ´ÔÀÇ ½ÇÁ¦ ¸ð´ÏÅÍÀÇ ´É·ÂÄ¡¸¦ ³Ñ¾î¼­´Â ¸ðµ¨À» ¼±ÅÃÇÏÁö ¸¶¼¼¿ä: \n"
-"´ÔÀÇ ¸ð´ÏÅÍ°¡ ÈÑ¼ÕµÉ ¼ö ÀÖ½À´Ï´Ù.\n"
-"Àß ¸ð¸£°Ú´Ù¸é, ¾ÈÀüÇÏ°Ô ³·Àº ¼³Á¤°ªÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "¼öÆò ÁÖÆļö"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "¼öÁ÷ ÁÖÆļö"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "¸ð´ÏÅÍ°¡ ¼³Á¤µÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "±×·¡ÇÈ Ä«µå°¡ ¾ÆÁ÷ ¼³Á¤µÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Çػ󵵰¡ ¼±ÅõÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "ÀÌ ¼³Á¤À» Å×½ºÆ®ÇØ º¸½Ã°Ú½À´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ÁÖÀÇ : ÀÌ ±×·¡ÇÈ Ä«µå¸¦ Å×½ºÆ®Çϸé ÄÄÇ»ÅÍ°¡ ¸ØÃâÁöµµ ¸ð¸¨´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "¼³Á¤ Å×½ºÆ®"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ÀϺΠÀÎÀÚ°ªµéÀ» º¯°æÇØ º¸¼¼¿ä."
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d ÃÊ ³²¾Ò½À´Ï´Ù."
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "ÀÌ ¼³Á¤ÀÌ ¸Â½À´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù. ÀϺΠÀÎÀÚ°ªÀ» º¯°æÇØ º¸¼¼¿ä."
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "ÇØ»óµµ"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "ÇØ»óµµ¿Í »ö»óÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "±×·¡ÇÈ Ä«µå: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ¼­¹ö: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Ãß°¡ ¿É¼Ç"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "È®ÀÎ"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Àü¹®°¡ ¸ðµå"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "¸ðµÎ Ç¥½Ã"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "ÇØ»óµµ"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Å°º¸µå ÇüÅÂ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "¸¶¿ì½º Á¾·ù: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "¸¶¿ì½º ÀåÄ¡: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¸ð´ÏÅÍ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "¸ð´ÏÅÍ ¼öÆòÁÖÆļö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "¸ð´ÏÅÍ ¼öÁ÷ÁÖÆļö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "±×·¡ÇÈ Ä«µå: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "±×·¡ÇÈ Ä«µå ID: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ºñµð¿À ¸Þ¸ð¸®: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "»ö»ó ½Éµµ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "ÇØ»óµµ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ¼­¹ö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 µå¶óÀ̹ö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window ¼³Á¤ ÁغñÁß"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "¾î¶»°Ô ÇϽðڽÀ´Ï±î?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "¸ð´ÏÅÍ º¯°æ"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "±×·¡ÇÈ Ä«µå º¯°æ"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "¼­¹ö ¿É¼Ç º¯°æ"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "ÇØ»óµµ º¯°æ"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Á¤º¸ º¸±â"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "´Ù½Ã Å×½ºÆ®"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Á¾·á"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"º¯°æ»çÇ×À» ÀúÀåÇÒ±î¿ä?\n"
-"ÇöÀç ¼³Á¤:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "½ÃÀ۽à ¹Ù·Î X ½ÇÇà"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"ºÎÆýÿ¡ ÀÚµ¿À¸·Î XÀ©µµ¿ì°¡ ½ÃÀ۵ǵµ·Ï ÇÒ¼ö ÀÖ½À´Ï´Ù.\n"
-"´Ù½Ã ºÎÆÃÇßÀ»¶§ ÀÚµ¿À¸·Î XÀ©µµ°¡ ½ÃÀÛµÇ±æ ¿øÇϼ¼¿ä?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "º¯°æ»çÇ×À» Àû¿ëÇÏ·Á¸é %s·Î Àç·Î±×ÀÎ Çϼ¼¿ä."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "·Î±×¾Æ¿ôÇÏ°í Crtl-Alt-BackSpaceÅ°¸¦ ´©¸£¼¼¿ä."
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 »ö»ó (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3¸¸2õ »ö»ó (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6¸¸5õ »ö»ó (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "õ6¹é¸¸ »ö»ó  (24bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "40¾ï »ö»ó (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "16 MB ÀÌ»ó"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Ç¥ÁØ VGA, 640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "½´ÆÛ VGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ȣȯ, 1024x768 @ 87 Hz interlaced (800x600 ¾ÈµÊ)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "½´ÆÛ VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "È®Àå ½´ÆÛ VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "ºñÀÎÅÍ·¹À̽º SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "°íÁÖÆļö SVGA,  1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 @ 60 Hz Áö¿ø ´ÙÁßÁÖÆļö ¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 @ 74 Hz Áö¿ø ´ÙÁßÁÖÆļö ¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 @ 76 Hz Áö¿ø ´ÙÁßÁÖÆļö ¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 @ 70 Hz »ç¿ë °¡´É ¸ð´ÏÅÍ"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 @ 76 Hz »ç¿ë °¡´É ¸ð´ÏÅÍ"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "ºÎÆ® ÆÄƼ¼ÇÀÇ Ã¹¹ø° ¼½ÅÍ"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "µå¶óÀ̺êÀÇ Ã¹¹ø° ¼½ÅÍ(MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO ¼³Ä¡"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "ºÎÆ®·Î´õ¸¦ ¾îµð¿¡ ¼³Ä¡ÇÏ°í ½ÍÀ¸¼¼¿ä?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/GRUB ¼³Ä¡"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "ÅؽºÆ® ¸Þ´º LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "±×·¡ÇÈ ¸Þ´º LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "µµ½º/À©µµ¿ìÁî¿¡¼­ ºÎÆÃ(loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "ºÎÆ®·Î´õ ÁÖ ¿É¼Çµé"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "»ç¿ëÇÒ ºÎÆ®·Î´õ"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "ºÎÆ®·Î´õ ¼³Ä¡"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "ºÎÆ® ÀåÄ¡"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (¿À·¡µÈ BIOSµé¿¡¼± ÀÛµ¿ÇÏÁö ¾ÊÀ»¼öµµ ÀÖ½À´Ï´Ù.)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "ÄÞÆÑµå ¸ðµå"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "ÄÞÆÑÆ® ¸ðµå"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "ºñµð¿À ¸ðµå"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "±âº» À̹ÌÁö·Î ºÎÆÃµÉ ¶§±îÁö Áö¿¬½Ã°£"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "¾ÏÈ£"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "¾ÏÈ£ (È®ÀÎ)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "¸í·ÉÇà ¿É¼ÇÀ» Á¦ÇÑÇÕ´Ï´Ù."
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "Á¦ÇÑ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "ºÎÆýà /tmp µð·ºÅ丮 ÀÚµ¿ û¼Ò"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "¿É¼Ç: Á¤È®ÇÑ ¸Þ¸ð¸® ¿ë·® (%d MB ¹ß°ß)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "´ÙÁß profiles Çã¿ë"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "¸Þ¸ð¸® ¿ë·®¸¦ MB·Î ÀÔ·ÂÇϼ¼¿ä"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "¿É¼Ç: ¡¸¸í·ÉÇà ¿É¼ÇÁ¦ÇÑ¡¹Àº ¾ÏÈ£¾øÀÌ »ç¿ëµÉ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "´Ù½Ã ½ÃµµÇϼ¼¿ä."
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "¾ÏÈ£°¡ ÀÏÄ¡ÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "ÃʱâÈ­ ¸Þ½ÃÁö"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Æß¿þ¾î ¿­±â Áö¿¬"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Ä¿³Î ºÎÆ® Á¦Çѽð£"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD ºÎÆà Çã¿ë?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF ºÎÆà Çã¿ë?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "񃧯 OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"¸î °¡Áö Ç׸ñÀÌ ¿©±â¿¡ Ç¥½ÃµÇ°í ÀÖ½À´Ï´Ù.\n"
-"´õ Ãß°¡Çϰųª, ±âÁ¸ÀÇ °ÍµéÀ» ¼öÁ¤ÇÒ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ãß°¡"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "¿Ï·á"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "º¯°æ"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "¾î¶² Á¾·ùÀÇ Ç׸ñÀ» Ãß°¡ÇϽðڽÀ´Ï±î?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "¸®´ª½º"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "±âŸ OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "±âŸ OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "±âŸ OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "À̹ÌÁö"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "·çÆ®"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Ãß°¡"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "ÃʱâÈ­ ·¥µð½ºÅ©"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Àбâ-¾²±â"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Å×À̺í"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "À§Çè"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Ç׸ñ¸í"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "±âº»°ª"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "·¥µð½ºÅ© ¿ë·®"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "ºñµð¿À ¾øÀ½"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ç׸ñ Á¦°Å"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "ºó Ç׸ñ¸íÀº Çã¿ëµÇÁö ¾Ê½À´Ï´Ù."
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "½º¿Ò ÆÄƼ¼ÇÀº ¹Ýµå½Ã ÇÊ¿äÇÕ´Ï´Ù."
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "ÀÌ Ç׸ñ¸íÀº ÀÌ¹Ì »ç¿ëµÇ°í ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ÀÎÅÍÆäÀ̽º°¡ °¨ÁöµÇ¾ú½À´Ï´Ù."
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "¶Ç ´Ù¸¥°ÍÀÌ ¼³Ä¡µÇ¾î ÀÖ½À´Ï±î?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¶Ç ´Ù¸¥ %s ÀÎÅÍÆäÀ̽º°¡ ¼³Ä¡µÇ¾î ÀÖ½À´Ï±î?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "¾Æ´Ï¿À"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "¿¹"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Çϵå¿þ¾î Á¤º¸ º¸±â"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%sÄ«µå µå¶óÀ̹ö %s ¼³Ä¡Áß"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(%s ¸ðµâ »ç¿ë)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "¾î¶² %s µå¶óÀ̹ö¸¦ ½ÃµµÇØ º¾´Ï±î?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"ÀϹÝÀûÀ¸·Î %s µå¶óÀ̹ö´Â Ãß°¡ Á¤º¸ ¾øÀ̵µ Àß ÀÛµ¿ÇÏÁö¸¸, ¾î¶² °æ¿ì¿¡´Â \n"
-"Ãß°¡ Á¤º¸¸¦ ÇÊ¿ä·Î Çϱ⵵ ÇÕ´Ï´Ù. Ãß°¡ ¿É¼ÇÀ» ÁöÁ¤ÇϽðڽÀ´Ï±î, ¾Æ´Ï¸é \n"
-"ÇÊ¿äÇÑ Á¤º¸¸¦ ÀÚµ¿°Ë»öÇÏ°Ô ÇÏ°Ú½À´Ï±î?\n"
-"ÀÚµ¿°Ë»öÀº ¾î¼´Ù°¡ ÄÄÇ»Å͸¦ ¸ØÃß°Ô ÇÒ ¼öµµ ÀÖ½À´Ï´Ù.ÇÏÁö¸¸,\n"
-"ÀåÄ¡¸¦ ÈѼÕÇÏÁö´Â ¾Ê½À´Ï´Ù."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "ÀÚµ¿°Ë»ö"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "¿É¼Ç ÁöÁ¤"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"ÀÌÁ¦ %s µå¶óÀ̹ö¿¡ ¿É¼ÇÀ» ÁöÁ¤ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"¿É¼ÇÀº ``À̸§=°ª À̸§2=°ª2 ...''Çü½ÄÀ¸·Î ÁöÁ¤ÇÕ´Ï´Ù..\n"
-"°¡·É, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "¸ðµâ ¿É¼Çµé:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s ¸ðµâÀ» ÀоîµéÀ̴µ¥ ½ÇÆÐÇß½À´Ï´Ù.\n"
-"´Ù¸¥ °ªÀ¸·Î ´Ù½Ã ½ÃµµÇØ º¸½Ã°Ú½À´Ï±î?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ÀÌ¹Ì %s´Â(Àº) Ãß°¡µÇ¾ú½À´Ï´Ù.)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "ÀÌ ¾ÏÈ£´Â ³Ê¹« ´Ü¼øÇÕ´Ï´Ù."
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "»ç¿ëÀÚ¸íÀ» ÀÔ·ÂÇØ ÁÖ¼¼¿ä"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "»ç¿ëÀÚ¸íÀº ¿µ¹® ¼Ò¹®ÀÚ³ª ¼ýÀÚ, '-' ±×¸®°í '_' ¸¸ Æ÷ÇԵɼö ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "ÀÌ »ç¿ëÀÚ¸íÀº ÀÌ¹Ì Ãß°¡µÇ¾î ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "»ç¿ëÀÚ Ãß°¡"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"»ç¿ëÀÚ ÀÔ·Â\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "»ç¿ëÀÚ Çã°¡"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "½ÇÁ¦ À̸§"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "»ç¿ëÀÚ¸í"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "¸í·É Çؼ®±â"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "¾ÆÀÌÄÜ"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "ÀÚµ¿·Î±×ÀÎ"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"ÀÚµ¿À¸·Î ƯÁ¤ »ç¿ëÀڷμ­ ·Î±×Àεǵµ·Ï ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"ÀÌ·± Ư¼ºÀ» ¿øÇϼ¼¿ä?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "±âº» »ç¿ëÀÚ¸¦ ¼±ÅÃÇϼ¼¿ä:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "»ç¿ëÇÒ À©µµ¿ì ¸Å´ÏÀú¸¦ ¼±ÅÃÇϼ¼¿ä:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "»ç¿ëÇÒ ¾ð¾î¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "¼³Ä¡ÈÄ ´Ù¸¥ ´Ù¸¥ ¾ð¾î¸¦ ¼±ÅÃÇÒ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "¸ðµÎ"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "»ç¿ëÀÚ Ãß°¡"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "»ç¿ëÀÚ Á¤ÀÇ"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "ÆÄÀÏ °øÀ¯"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"ÀÌ ÆÑÅ°Áö´Â ¹Ýµå½Ã ¾÷±×·¹À̵åµÇ¾î¾ß ÇÕ´Ï´Ù.\n"
-"Á¤¸»·Î ¼±ÅÃÀ» ÇØÁ¦ÇϽðڽÀ´Ï±î?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Ãë¼Ò"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "º¸¾È¿¡ ½Å°æ¾È¾¸"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "ÃÖÀú"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ç¥ÁØ"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "³ôÀ½"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "³ôÀ½"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "ÃÖ°í"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"ÀÌ µî±ÞÀ» »ç¿ëÇÒ·Á¸é ¸Å¿ì ÁÖÀÇÇÏ¿©¾ß ÇÕ´Ï´Ù. ½Ã½ºÅÛÀ» »ç¿ëÇϱ⿡´Â \n"
-"¿ëÀÌÇÏ°ÚÁö¸¸ ¸Å¿ì ¹Î°¨ÇÏ°Ô ÀÛµ¿ÇÕ´Ï´Ù: ÀÎÅͳÝÀ̳ª ³×Æ®¿÷¿¡ ¿¬°áµÈ ½Ã½ºÅÛ¿ë\n"
-"À¸·Î´Â »ç¿ëÇÏÁö ¸¶¼¼¿ä. ¾ÏÈ£±â´ÉÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"¾ÏÈ£±â´ÉÀÌ Àû¿ëµÇÁö¸¸, ³×Æ®¿÷¿¡ ¿¬°áµÈ ÄÄÇ»ÅÍ·Î »ç¿ëÇϱ⿡´Â ¾ÆÁ÷ ÀûÀýÇÏÁö ¾Ê"
-"½À´Ï´Ù."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"ÀÌ µî±ÞÀº Ŭ¶óÀ̾ðÆ®·Î¼­ ÀÎÅͳݿ¡ Á¢¼ÓÇϴµ¥ Àû´çÇÑ Ç¥ÁØ º¸¾Èµî±ÞÀÔ´Ï´Ù.\n"
-"ÀÌ µî±ÞºÎÅÍ ÀûÁ¤ÇÑ ½Ã½ºÅÛ º¸¾È Á¡°Ë±â´ÉÀÌ ÀÖ½À´Ï´Ù. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"ÀÌ º¸¾Èµî±ÞÀ¸·Î ÀÌ ½Ã½ºÅÛÀ» ¼­¹ö·Î ¿î¿ëÇÒ ¼ö ÀÖ°Ô µË´Ï´Ù.\n"
-"ÀÌ º¸¾Èµî±ÞÀº ¿ÜºÎÀÇ Å¬¶óÀ̾ðÆ®µéÀÇ Á¢¼ÓÀ» ¹Þ¾ÆµéÀ̴µ¥ À־ \n"
-"ÃæºÐÈ÷ ³ôÀº º¸¾Èµî±ÞÀÔ´Ï´Ù. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"º¸¾È 4 µî±ÞÀÌ Àû¿ëµË´Ï´Ù. ½Ã½ºÅÛÀÌ ¿ÏÀüÈ÷ ¿ÜºÎÁ¢±Ù¿¡¼­ °Ý¸®µË´Ï´Ù.\n"
-"ÃÖ°í º¸¾È ¼öÁØÀÔ´Ï´Ù."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "º¸¾È ´Ü°è¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "º¸¾È ¼öÁØ"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "¼­¹ö¿¡ ´ëÇØ libsafe »ç¿ë"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "¹öÆÛ ³ÑħÀ̳ª Çü½ÄÈ­ ¹®ÀÚ¿­ °ø°ÝÀ» ¸·´Â ¶óÀ̺귯¸®."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s ¿î¿µÃ¼Á¦ ¼±Åñ⿡ ¿À½Å °ÍÀ» ȯ¿µÇÕ´Ï´Ù!\n"
-"\n"
-"À§ ¸®½ºÆ®¿¡¼­ ¿î¿µÃ¼Á¦¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"±×·¸Áö ¾ÊÀ¸¸é %dÃÊ ÈÄ¿¡ ±âº»°ªÀ¸·Î ºÎÆÃÇÕ´Ï´Ù.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "¿î¿µÃ¼Á¦ ¼±ÅÃÀÚ GRUB¿¡ ¿À½Å°É ȯ¿µÇÕ´Ï´Ù."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%cÅ°¿Í %c¸¦ »ç¿ëÇÏ¿© ¹ÝÀüµÈ Ç׸ñÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "¼±ÅÃµÈ ¿î¿µÃ¼Á¦·Î ºÎÆÃÇÒ·Á¸é ¿£Å͸¦, ¼öÁ¤ÇÒ·Á¸é 'e'¸¦ ´­·¯ÁÖ¼¼¿ä."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ºÎÆÃÀü ¸í·Éµé ¶Ç´Â, ¸í·ÉÇàÀ» À§Çؼ­´Â 'c'´­·¯ÁÖ¼¼¿ä."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "¹ÝÀüµÈ Ç׸ñÀ¸·Î %dÃÊÈÄ ÀÚµ¿À¸·Î ºÎÆõ˴ϴÙ."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot¿¡ °ø°£ÀÌ ºÎÁ·ÇÕ´Ï´Ù."
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "µ¥½ºÅ©Å¾"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "½ÃÀÛ ¸Þ´º"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "¡¸%s¡¹ÆÄƼ¼Ç¿¡ ºÎÆ®·Î´õ¸¦ ¼³Ä¡ÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "¾ÆÁ÷ µµ¿ò¸»ÀÌ ÁغñµÇÁö ¾Ê¾Ò½À´Ï´Ù.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "ºÎÆà ½ºÅ¸ÀÏ ¼³Á¤"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/ÆÄÀÏ(_F)"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/ÆÄÀÏ(F)/Á¾·á(_Q)"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "»õ ½ºÅ¸ÀÏ ¹üÁÖÈ­ ¸ð´ÏÅÍ"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "»õ ½ºÅ¸ÀÏ ¸ð´ÏÅÍ"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ÀüÅëÀû ¸ð´ÏÅÍ"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ÀüÅëÀû GTK+ ¸ð´ÏÅÍ"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "ºÎÆýà ¿À·Î¶ó ½ÇÇà"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/Grub ¸ðµå"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot ¸ðµå"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÇöÀç ºÎÆ® °ü¸®ÀÚ·Î %s¸¦ »ç¿ëÇÏ°í ÀÖ½À´Ï´Ù.\n"
-"¼³Á¤ ¸¶¹ý»ç¸¦ ½ÇÇàÇÏ·Á¸é ¡¸¼³Á¤¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "¼³Á¤"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "½Ã½ºÅÛ ¸ðµå"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "½ÃÀÛÇÒ ¶§ X-Window ½ÇÇà"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "¾Æ´Ï¿À, ÀÚµ¿·Î±×ÀÎÀ» »ç¿ëÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "¿¹, ÀÚµ¿·Î±×ÀÎÀ» »ç¿ëÇÕ´Ï´Ù."
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "È®ÀÎ"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "¡¸/etc/inittab¡¹ÆÄÀÏÀ» ÀÐÀ» ¼ö ¾ø½À´Ï´Ù: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ºÐ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ºÐ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ÃÊ"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "´õÀÌ»ó ÆÄƼ¼ÇÀ» Ãß°¡ÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "¼³Ä¡ÈÄ ´Ù¸¥ ´Ù¸¥ ¾ð¾î¸¦ ¼±ÅÃÇÒ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "ÇÁ¶û½º"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "º§±â¿¡"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "µ¶ÀÏ"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "±×¸®½º"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "³ë¸£¿þÀÌ"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "½º¿þµ§"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "ÀÌÅ»¸®¾Æ"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "½Ã¸®¾ó ¸¶¿ì½º"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "¸ÕÀú µ¥ÀÌÅ͸¦ ¹é¾÷Çϼ¼¿ä."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "ÁÖÀDZí°Ô ÀÐÀ¸¼¼¿ä!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"¸¸¾à aboot¸¦ »ç¿ëÇÒ °èȹÀ̶ó¸é, µð½ºÅ©ÀÇ ½ÃÀۺκп¡ ÃæºÐÇÑ °ø°£ (2048 ¼½ÅÍ "
-"¸é ÃæºÐÇÔ)\n"
-"À» ³²±âµµ·Ï ÁÖÀÇÇϼ¼¿ä."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "¿À·ù"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "¸¶¹ý»ç"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "ÇൿÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"ÇϳªÀÇ Å« µµ½º ÆÄƼ¼ÇÀ» °¡Áö°í ÀÖ½À´Ï´Ù.\n"
-"(ÀϹÝÀûÀ¸·Î ¸¶ÀÌÅ©·Î¼ÒÇÁÆ®ÀÇ µµ½º/À©µµ¿ìÁî¿¡¼­ »ç¿ë).\n"
-"¸ÕÀú ±× ÆÄƼ¼ÇÀÇ Å©±â¸¦ Á¶Á¤ÇÒ °ÍÀ» ±ÇÀåÇÕ´Ï´Ù.\n"
-"(±×°ÍÀ» Ŭ¸¯ÇÑÈÄ, \"Å©±âÁ¶Á¤\"À» Ŭ¸¯Çϼ¼¿ä.)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "ÆÄƼ¼ÇÀ» Ŭ¸¯Çϼ¼¿ä"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "»ó¼¼¼³¸í"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Àú³ÎÈ­ FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "½º¿Ò"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "ºó°ø°£"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "±âŸ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "ÆÄÀϽýºÅÛ À¯Çü:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "»ý¼º"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "À¯Çü"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "´ë½Å¿¡ ¡¸%s¡¹¸¦ »ç¿ëÇÕ´Ï´Ù"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "»èÁ¦"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "¡¸¾ð¸¶¿îÆ®¡¹¸¦ ¸ÕÀú »ç¿ëÇϼ¼¿ä"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "%sÀÇ ÆÄƼ¼Ç À¯ÇüÀ» º¯°æÈÄ ÀÌ ÆÄƼ¼Ç³»ÀÇ ¸ðµç ÀڷḦ ÀÒ°Ô µË´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "ÆÄƼ¼Ç ¼±ÅÃ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Ãß°¡ ÆÄƼ¼Ç ¼±ÅÃ"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Á¾·á"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Àü¹®°¡ ¸ðµå·Î Àüȯ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "ÀÏ¹Ý ¸ðµå·Î Àüȯ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "µÇµ¹¸®±â"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "°è¼ÓÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "ÀúÀåÇÏÁö ¾Ê°í Á¾·áÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "ÆÄƼ¼ÇÀ» ±â·ÏÇÏÁö ¾Ê°í Á¾·áÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¡¸/etc/fstab¡¹ÀÇ º¯°æ»çÇ×À» ÀúÀåÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "ÀÚµ¿ ÇÒ´ç"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "¸ðµÎ »èÁ¦"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "ÇÏµå µð½ºÅ© Á¤º¸"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "¸ðµç ÁÖÆÄƼ¼ÇÀÌ »ç¿ëÁßÀÔ´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "´õÀÌ»ó ÆÄƼ¼ÇÀ» Ãß°¡ÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"´õ ¸¹Àº ÆÄƼ¼ÇÀ» ¸¸µå½Ç·Á¸é, È®Àå ÆÄƼ¼ÇÀ» ¸¸µé¼ö ÀÖµµ·Ï ÁÖÆÄƼ¼Ç Çϳª¸¦ Áö¿ì"
-"¼¼¿ä."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "ÆÄƼ¼Ç Å×À̺í ÀúÀå"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "ÆÄƼ¼Ç Å×ÀÌºí º¹±¸"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "ÆÄƼ¼Ç Å×À̺í ÀÀ±Þóġ"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "ÆÄƼ¼Ç Å×ÀÌºí ´Ù½Ã Àбâ"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Å»Âø½Ä ¹Ìµð¾î ÀÚµ¿ ¸¶¿îÆ®"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "ÆÄÀÏÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"¹é¾÷ ÆÄƼ¼Ç Å×À̺í Å©±â°¡ °°Áö ¾Ê½À´Ï´Ù.\n"
-"°è¼Ó ÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "°æ°í"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ç÷ÎÇÇ µð½ºÅ©¸¦ µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä\n"
-"Ç÷ÎÇÇ µð½ºÅ©ÀÇ ¸ðµç ÀڷḦ ÀÒ°Ô µË´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "ÆÄƼ¼Ç Å×ÀÌºí º¹±¸ ½Ãµµ Áß..."
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "ÀÚ¼¼ÇÑ Á¤º¸"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "¸¶¿îÆ® À§Ä¡"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "¿É¼Çµé"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Å©±âÁ¶Á¤"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "À̵¿"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Æ÷¸Ë"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "¸¶¿îÆ®"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "RAID¿¡ Ãß°¡"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "LVM¿¡ Ãß°¡"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "¾ð¸¶¿îÆ®"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "RAID·ÎºÎÅÍ Á¦°Å"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LVMÀ¸·ÎºÎÅÍ Á¦°Å"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID ¼öÁ¤"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "·çÇÁ¹éÀ¸·Î »ç¿ë"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "»õ ÆÄƼ¼Ç ¸¸µé±â"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "½ÃÀÛ ¼½ÅÍ: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Å©±â(MB) :"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "ÆÄÀϽýºÅÛ À¯Çü: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "¸¶¿îÆ® À§Ä¡: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "»ç¿ëÀÚ Á¤ÀÇ"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "·çÇÁ¹é ÆÄÀÏÀ» Á¦°ÅÇմϱî?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "ÆÄƼ¼Ç À¯Çü º¯°æ"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "¾î¶² ÆÄÀÏ ½Ã½ºÅÛÀ» ¿øÇϼ¼¿ä?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "EXT2¿¡¼­ EXT3·Î º¯°æ"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%sÆÄÀÏÀ» ¾îµð¿¡ ·çÇÁ¹éÀ¸·Î ¸¶¿îÆ® ÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ÀåÄ¡ %s¸¦ ¾îµð¿¡ ¸¶¿îÆ® ÇϽðڽÀ´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"ÀÌ ÆÄƼ¼ÇÀº loopbackÀ¸·Î ¼³Á¤µÇ¾î ÀÖÀ¸¹Ç·Î ¸¶¿îÆ® Æ÷ÀÎÆ®¸¦ º¯°æÇÒ¼ö ¾ø½À´Ï"
-"´Ù.\n"
-"loopbackÀ» ¸ÕÀú Á¦°ÅÇϼ¼¿ä."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "µµ½º ÆÄÀϽýºÅÛÀÇ ¹üÀ§ °è»êÁß"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Å©±âº¯°æ"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "ÀÌ ÆÄƼ¼ÇÀº Å©±âº¯°æÀÌ Çã¿ëµÇÁö ¾Ê½À´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "ÀÌ ÆÄƼ¼ÇÀÇ ¸ðµç µ¥ÀÌŸ¸¦ ¹é¾÷ÇÏ¿©¾ß ÇÕ´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "%s ÆÄƼ¼ÇÀÇ Å©±â¸¦ º¯°æÇϸé, ¸ðµç µ¥ÀÌŸ¸¦ ÀҰԵ˴ϴÙ."
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "»õ·Î¿î Å©±â¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "»õ·Î¿î ¿ë·®(MB):"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "¾î¶² µð½ºÅ©¸¦ À̵¿ÇÏ°í ½ÍÀ¸½Ê´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "¼½ÅÍ"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "¾î¶² ¼½Å͸¦ À̵¿ÇÏ°í ½ÍÀ¸½Ê´Ï±î?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "À̵¿ Áß"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "ÆÄƼ¼Ç À̵¿ Áß..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Ãß°¡ÇÒ ±âÁ¸ RAID¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "»õ·Î ¸¸µé±â"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Ãß°¡ÇÒ LVM¸¦ ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM À̸§?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "ÀÌ ÆÄƼ¼ÇÀº loopbackÀ¸·Î »ç¿ëµÉ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "·çÇÁ¹é"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "·çÇÁ¹é ÆÄÀÏ À̸§: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "ÆÄÀÏ À̸§À» ÀÔ·ÂÇϼ¼¿ä."
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "´Ù¸¥ ·çÇÁ¹éÀÌ ÀÌ ÆÄÀÏÀ» »ç¿ëÇÏ°í ÀÖ½À´Ï´Ù, ´Ù¸¥ °ÍÀ» ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "ÆÄÀÏÀÌ ÀÌ¹Ì Á¸ÀçÇÕ´Ï´Ù. ±×°ÍÀ» »ç¿ëÇմϱî?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "¸¶¿îÆ® ¿É¼Çµé:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "´Ù¾çÇÑ"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ÀåÄ¡"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "·¹º§"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Å©±â"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "ÁÖÀÇ : ÀÌ Á¶ÀÛÀº À§ÇèÇÕ´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "¾î¶² À¯ÇüÀÇ ÆÄƼ¼ÇÀԴϱî?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Á˼ÛÇÕ´Ï´Ù. /boot µð·ºÅ丮°¡ µå¶óÀ̺ê»ó¿¡¼­ Çã¿ë¹üÀ§¸¦ ³Ñ¾î¼­ ÀÖ¾î »ý¼ºÇÒ¼ö "
-"¾ø½À´Ï´Ù. ( 1024 ½Ç¸°´õ ÀÌÇÏ¿¡¼­¸¸ °¡´ÉÇÕ´Ï´Ù.\n"
-"LILO¸¦ »ç¿ëÇÑ´Ù°í ÇÏ´õ¶óµµ µ¿ÀÛÇÏÁö ¾Ê°í, LILO ÀÚü¸¦ »ç¿ëÇÒ¼öµµ ¾ø½À´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"¼±ÅÃÇÑ root(/)°¡ ¹°¸®ÀûÀ¸·Î 1024½Ç¸°´õ µÚ¿¡ ÀÖ½À´Ï´Ù.\n"
-"µû¶ó¼­ /boot ÆÄƼ¼ÇÀ» °¡Áú¼ö ¾ø½À´Ï´Ù.\n"
-"LILO ºÎÆ® ¸Å´ÏÀú¸¦ »ç¿ëÇÏ·Á ÇÑ´Ù¸é, ÁÖÀÇÇؼ­ /boot ÆÄƼ¼ÇÀ» Ãß°¡Çϼ¼¿ä."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"¼ÒÇÁÆ®¿þ¾î RAID ÆÄƼ¼ÇÀ» ·çÆ®(/)·Î ÁöÁ¤Çß½À´Ï´Ù.\n"
-"¾î¶°ÇÑ ºÎÆ®·Î´õµµ /boot ÆÄƼ¼Ç ¾øÀÌ´Â ÀÌ°ÍÀ» ó¸®ÇÏÁö ¸øÇÕ´Ï´Ù.\n"
-"±×·¯¹Ç·Î /boot ÆÄƼ¼ÇÀ» Ãß°¡ÇÏ´Â °ÍÀ» ÀØÁö ¸¶¼¼¿ä."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s µå¶óÀ̺êÀÇ ÆÄƼ¼Ç Å×À̺íÀ» ÀúÀåÇÕ´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "º¯°æµÈ°ÍÀ» Àû¿ëÇϱâ À§Çؼ± ¸®ºÎÆÃÀÌ ÇÊ¿äÇÕ´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "%s ÆÄƼ¼ÇÀ» Æ÷¸ËÇϸé, ¸ðµç µ¥ÀÌŸ¸¦ ÀÒ°Ô µË´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Æ÷¸Ë Áß"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "loopback ÆÄÀÏ %s Æ÷¸ÅÁß"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s ÆÄƼ¼Ç Æ÷¸ËÁß"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "ÆÄÀÏ ¼û±â±â"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "»õ ÆÄƼ¼ÇÀ¸·Î ÆÄÀÏ ¿È±â±â"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"µð·ºÅ丮 %s¿¡´Â ÀÌ¹Ì µ¥ÀÌÅÍ°¡ ÀÖ½À´Ï´Ù.\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "»õ ÆÄƼ¼ÇÀ¸·Î ÆÄÀÏ ¿È±â´Â Áß"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s º¹»ç Áß"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s Á¦°Å Áß"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "ÀåÄ¡: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS µå¶óÀÌºê ¹®ÀÚ: %s (´ÜÁö ÃßÃøÀÏ »ÓÀÓ)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "À¯Çü: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "À̸§:"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "½ÃÀÛ: ¼½ÅÍ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Å©±â: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ¼½ÅÍ"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "%d ½Ç¸°´õºÎÅÍ %d ½Ç¸°´õ±îÁö\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Æ÷¸ËµÇ¾úÀ½\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Æ÷¸Ë ¾ÈµÇ¾úÀ½\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "¸¶¿îÆ® µÇ¾úÀ½\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "·¹À̵å ÀåÄ¡ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"·çÇÁ¹é ÆÄÀÏ(µé):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"±âº»ÀûÀ¸·Î ºÎÆõǴ ÆÄƼ¼Ç\n"
-"    (lilo¸¦ À§ÇÑ°ÍÀÌ ¾Æ´Ï¶ó MS-DOS boot¸¦ À§ÇÑ°ÍÀÓ)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "%s µî±Þ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Å©±â %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "·¹À̵å-µð½ºÅ© %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "·çÇÁ¹é ÆÄÀÏ À̸§: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"ÀÌ ÆÄƼ¼ÇÀº µå¶óÀ̹ö ÆÄƼ¼ÇÀÔ´Ï´Ù.\n"
-"±×³É µÎ´Â °ÍÀÌ ÁÁ½À´Ï´Ù.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ÀÌ Æ¯º°ÇÑ ºÎÆ®½ºÆ®·¦\n"
-"ÆÄƼ¼ÇÀº ½Ã½ºÅÛÀ» \n"
-"µà¾ó ºÎÆÃÇϱâ À§ÇÑ °ÍÀÔ´Ï´Ù.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Å©±â : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "À§Ä¡: %s ½Ç¸°ÅÍ, %s Çìµå, %s ¼½ÅÍ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Á¤º¸: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-µð½ºÅ© %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ÆÄƼ¼Ç Å×À̺í À¯Çü: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d ¹ö½º»ó¿¡¼­ ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "¿É¼Çµé: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "ÆÄÀϽýºÅÛ À¯Çü: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "ÀÌ ¾ÏÈ£´Â ³Ê¹« ´Ü¼øÇÕ´Ï´Ù.( Àû¾îµµ %d ±ÛÀÚ´Â ³Ñ¾î¾ß ÇÕ´Ï´Ù)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "¾ÏÈ£°¡ ÀÏÄ¡ÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "À¯Çü º¯°æ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "¸Åü¸¦ Ŭ¸¯Çϼ¼¿ä."
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ¼­¹ö"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Æ÷¸Ë ½ÇÆÐ(µå¶óÀ̺ê %s)"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s´Â %s À¯ÇüÀ̹ǷΠÆ÷¸ËÇÒ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "ÆÄÀϽýºÅÛ Á¡°ËÀÌ Á¾·áÄÚµå %d ¶Ç´Â ½Ã±×³Î %d·Î ½ÇÆÐÇÏ¿´½À´Ï´Ù."
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s¸¦ ¾ð¸¶¿îÆ®Áß ¿À·ù¹ß»ý: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "´Ü¼øÈ­"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "¼­¹ö"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB ¹Ì¸¸ÀÇ ÆÄƼ¼Ç¿¡´Â JFS ÆÄÀÏ ½Ã½ºÅÛÀ» »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB ¹Ì¸¸ÀÇ ÆÄƼ¼Ç¿¡´Â ReiserFS ÆÄÀÏ ½Ã½ºÅÛÀ» »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "¸¶¿îÆ® À§Ä¡´Â ¹Ýµå½Ã ¡¸/¡¹·Î ½ÃÀÛÇÏ¿©¾ß ÇÕ´Ï´Ù."
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "¸¶¿îÆ® À§Ä¡ %s°¡ ÀÌ¹Ì Á¸ÀçÇÕ´Ï´Ù.\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr " %s ¸¶¿îÆ® Æ÷ÀÎÆ®·Î LVM ³í¸®º¼·ýÀ» »ç¿ëÇÒ ¼ö´Â ¾ø½À´Ï´Ù. "
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "ÀÌ µð·ºÅ丮´Â ·çÆ® ÆÄÀϽýºÅÛ ¾È¿¡ ÀÖ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"ÀÌ ¸¶¿îÆ® À§Ä¡¿¡´Â Æ®·ç ÆÄÀϽýºÅÛ (ext2, reiserfs)ÀÌ ¸¶¿îÆ® µÇ¾î¾ß ÇÕ´Ï´Ù.\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr " %s ¸¶¿îÆ® Æ÷ÀÎÆ®·Î LVM ³í¸®º¼·ýÀ» »ç¿ëÇÒ ¼ö´Â ¾ø½À´Ï´Ù. "
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "ÀÚµ¿ÇÒ´çÀ» »ç¿ëÇϱ⿡´Â °ø°£ÀÌ ºÎÁ·ÇÕ´Ï´Ù."
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "%s¸¦ ¾²±âÀ§ÇØ ¿©´ÂÁß ¿À·ù¹ß»ý: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"¿À·ù ¹ß»ý - »õ·Î¿î ÆÄÀÏ ½Ã½ºÅÛÀ» ¸¸µé ¾î¶² ¿Ã¹Ù¸¥ ÀåÄ¡µµ ãÀ» ¼ö ¾ø½À´Ï´Ù.ÀÌ "
-"¹®Á¦¸¦ ÇØ°áÇϽ÷Á¸é, Çϵå¿þ¾î¸¦ Á¡°ËÇØ º¸½Ã±â ¹Ù¶ø´Ï´Ù."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "¾î¶² ÆÄƼ¼Çµµ Á¸ÀçÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"¼±ÅÃµÈ Çϵåµð½ºÅ©»óÀÇ ±âÁ¸ ¸®´ª½º ÆÄƼ¼ÇÀÌ À§¿¡ ¿­°ÅµÇ¾î ÀÖ½À´Ï´Ù.\n"
-"¸¶¹ý»ç¿¡ ÀÇÇØ ÀÌ¹Ì ¼³Á¤µÈ »çÇ×À» º¸Á¸ÇÒ ¼öµµ ÀÖÀ¸¸ç, ÀÌ´Â ´ëºÎºÐÀÇ ÀϹÝ\n"
-"¼³Ä¡¿¡ ÀûÀýÇÑ ¼³Á¤ÀÔ´Ï´Ù. ¸¸¾à Á÷Á¢ º¯°æÇϽðڴٸé, ÃÖ¼ÒÇÑ ·çÆ® ÆÄƼ¼Ç"
-"(¡¸/¡¹)\n"
-"Àº ¹Ýµå½Ã ÁöÁ¤ÇØ¾ß ÇÕ´Ï´Ù. ³Ê¹« ÀÛÀº ÆÄƼ¼ÇÀ» ¼±ÅÃÇÏÁö´Â ¸¶¼¼¿ä. ÃæºÐÇÑ ¼ÒÇÁ"
-"Æ®¿þ¾î\n"
-"¸¦ ¼³Ä¡ÇÏÁö ¸øÇÏ´Â ¼ö°¡ ÀÖ½À´Ï´Ù. ¸¸¾à °³ÀÎ µ¥ÀÌÅÍ°¡ º°µµÀÇ ÆÄƼ¼Ç¿¡ ÀúÀåµÇµµ"
-"·Ï\n"
-"ÇÏ°í ½Í´Ù¸é, ¡¸/home¡¹ÆÄƼ¼ÇÀ» º°µµ·Î ¸¸µå¼¼¿ä.(¿ÀÁ÷ ¸®´ª½º ÆÄƼ¼ÇÀÌ µÑ ÀÌ»ó"
-"ÀÏ\n"
-"°æ¿ì¿¡¸¸ °¡´ÉÇÕ´Ï´Ù.)\n"
-"\n"
-"°¢ ÆÄƼ¼ÇÀº ´ÙÀ½°ú °°ÀÌ ¿­°ÅµË´Ï´Ù: ¡¸À̸§¡¹,¡¸¿ë·®¡¹.\n"
-"\n"
-"¡¸À̸§¡¹¿µ¿ªÀÇ ±¸Á¶: ¡¸Çϵåµð½ºÅ© À¯Çü¡¹,¡¸Çϵåµð½ºÅ© ¹øÈ£¡¹,\n"
-"¡¸ÆÄƼ¼Ç ¹øÈ£¡¹(°¡·É, ¡¸hda1¡¹).\n"
-"\n"
-"¡¸Çϵåµð½ºÅ© À¯Çü¡¹Àº, IDE µð½ºÅ©ÀÏ °æ¿ì¿¡´Â ¡¸hd¡¹À̸ç,\n"
-"SCSI µð½ºÅ©ÀÏ °æ¿ì¿¡´Â ¡¸sd¡¹ÀÔ´Ï´Ù.\n"
-"\n"
-"¡¸Çϵåµð½ºÅ© ¹øÈ£¡¹´Â Ç×»ó ¡¸hd¡¹¶Ç´Â ¡¸sd¡¹µÚ¿¡ ¿À´Â ¹®ÀÚÀÔ´Ï´Ù.\n"
-"IDE Çϵåµð½ºÅ©ÀÇ °æ¿ì:\n"
-"\n"
-"  ¡Û ¡¸a¡¹´Â ¡¸ÁÖ IDE Á¦¾î±â»óÀÇ ÁÖ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸b¡¹´Â ¡¸ÁÖ IDE Á¦¾î±â»óÀÇ º¸Á¶ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸c¡¹´Â ¡¸º¸Á¶ IDE Á¦¾î±â»óÀÇ ÁÖ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸d¡¹´Â ¡¸º¸Á¶ IDE Á¦¾î±â»óÀÇ º¸Á¶ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"SCSI Çϵåµð½ºÅ©ÀÇ °æ¿ì, ¡¸a¡¹´Â ¡¸ÃÖ¼Ò SCSI ID¡¹, ¡¸b¡¹´Â ¡¸´ÙÀ½ ÃÖ¼Ò SCSI "
-"ID¡¹\n"
-"¿Í °°Àº ½ÄÀ¸·Î Àǹ̸¦ °¡Áý´Ï´Ù."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º ¼³Ä¡ ½Ã½ºÅÛÀº ¿©·¯ ÀåÀÇ CD·Î ±¸¼ºµÇ¾î ÀÖ½À´Ï´Ù.\n"
-"µå·¹ÀÌÅ©X´Â ¼±ÅÃµÈ °¢°¢ÀÇ ÆÑÅ°Áö°¡ ¾î´À CD¿¡ µé¾î ÀÖ´ÂÁö ÀÌ¹Ì ¾Ë°í ÀÖ½À´Ï"
-"´Ù.\n"
-"ÇÊ¿ä½Ã ÇöÀç CD¸¦ ÀÚµ¿À¸·Î ²¨³»°í ´Ù¸¥ CDÀÇ »ðÀÔÀ» ¿äûÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"ÀÌÁ¦ ½Ã½ºÅÛ»ó¿¡ ¼³Ä¡ÇÒ ÇÁ·Î±×·¥µéÀ» ÁöÁ¤ÇÒ Â÷·ÊÀÔ´Ï´Ù.\n"
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º¿¡´Â ¼³Ä¡ÇÒ ¼ö ÀÖ´Â ¼öõ °³ÀÇ ÇÁ·Î±×·¥µéÀÌ Àֱ⠶§¹®¿¡\n"
-"»ç¿ëÀÚ°¡ ±×°ÍµéÀ» ¸ðµÎ ´Ù ¾ËÁö´Â ¸øÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¸¸¾à Ç¥ÁØ CD ¼³Ä¡¸¦ ¼öÇàÇÏ°í ÀÖ´Â ÁßÀ̶ó¸é, ÇöÀç °¡Áö°í ÀÖ´Â CDµé¿¡ ´ëÇØ\n"
-"Áú¹®ÇÒ °ÍÀÔ´Ï´Ù. °¡Áö°í ÀÖ´Â CDµéÀÇ ¶óº§À» È®ÀÎÇÏ°í ÇöÀç ´ÔÀÇ »óȲ¿¡ ¸Â´Â\n"
-"¼±Åà »óÀÚ¸¦ ÁöÁ¤Çϼ¼¿ä. °è¼ÓÇÒ Áغñ°¡ µÇ¾úÀ¸¸é, ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"\n"
-"ÆÑÅ°ÁöµéÀº ¿ëµµ¿¡ µû¶ó ±×·ìÀ¸·Î ³ª¿­µÇ¾î ÀÖ½À´Ï´Ù.\n"
-"±×·ìµé ÀÚü´Â ¶Ç´Ù½Ã ³× °³ÀÇ ¿µ¿ªÀ¸·Î ³ª¿­µÇ¾î ÀÖ½À´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸¿öÅ©½ºÅ×À̼ǡ¹: ½Ã½ºÅÛÀ» ¿öÅ©½ºÅ×À̼ÇÀ¸·Î »ç¿ëÇÒ °èȹÀ̶ó¸é,\n"
-"Çϳª ÀÌ»óÀÇ ÇØ´ç ±×·ìÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸°³¹ß¡¹: ½Ã½ºÅÛÀ» ÇÁ·Î±×·¡¹ÖÀÇ ¿ëµµ·Î »ç¿ëÇÏ·Á ÇÑ´Ù¸é, ¿øÇÏ´Â ±×·ìµéÀ»\n"
-"¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸¼­¹ö¡¹: ³¡À¸·Î, ½Ã½ºÅÛÀÌ ¼­¹öµÇ±â¸¦ ¿øÇÑ´Ù¸é, ¿©±â¼­ ´ëºÎºÐÀÇ ÀÏ¹Ý ¼­ºñ"
-"½ºµéÀÌ\n"
-"¼³Ä¡µÇµµ·Ï ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸±×·¡ÇÈ È¯°æ¡¹: ¿©±â´Â ´ÔÀÌ ¼±È£ÇÏ´Â ±×·¡ÇÈ È¯°æÀ» ¼±ÅÃÇÏ´Â °÷ÀÔ´Ï´Ù.\n"
-"±×·¡ÇÈ È¯°æ ¿öÅ©½ºÅ×À̼ÇÀ» ¿øÇÑ´Ù¸é, ÃÖ¼ÒÇÑ Çϳª´Â ¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù!\n"
-"\n"
-"¸¶¿ì½º Æ÷ÀÎÅ͸¦ ±×·ì À̸§µé À§·Î ¿Ã¸®¸é, ÇØ´ç ±×·ì¿¡ ´ëÇÑ ÀÛÀº dz¼± µµ¿ò¸»"
-"À»\n"
-"º¸¿© ÁÙ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¡¸°³º° ÆÑÅ°Áö ¼±ÅṿɼÇÀ» ¼±ÅÃÇÒ ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"ÀÌ ¿É¼ÇÀº ´ÔÀÌ Á¦°øµÇ¾îÁö´Â ÆÑÅ°Áöµé¿¡ ´ëÇØ Àß ¾Ë°í Àְųª, ¼³Ä¡µÇ´Â ÆÑÅ°Áöµé"
-"¿¡ ´ëÇÑ\n"
-"ÃÑüÀûÀÎ Á¦¾î¸¦ ¿øÇÒ °æ¿ì¿¡ À¯¿ëÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¸¸¾à ´ÔÀÌ ¡¸¾÷µ¥ÀÌÆ®¡¹¸ðµå·Î ¼³Ä¡¸¦ ½ÃÀÛÇß´Ù¸é, ±âÁ¸¿¡ ¼³Ä¡µÇÁö ¾ÊÀº ÆÑÅ°Áöµé"
-"ÀÌ\n"
-"¼³Ä¡µÇ´Â °ÍÀ» ¸·±âÀ§ÇØ ¸ðµç ±×·ìÀ» ¼±ÅÃÇØÁ¦ÇÒ ¼ö ÀÖ½À´Ï´Ù. ÀÌ·¸°Ô ÇÏ´Â °ÍÀº\n"
-"±âÁ¸ ½Ã½ºÅÛÀ» ¾÷µ¥ÀÌÆ®Çϰųª °íÄ¡±â À§ÇÑ ÁÁÀº ¹æ¹ýÀÔ´Ï´Ù."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"ÀÌ ÄÄÇ»Å͸¦ ÀÎÅͳÝÀ̳ª Áö¿ª ³×Æ®¿ö¿¡ ¿¬°áÇÏ°í ½Í´Ù¸é, ¿Ã¹Ù¸¥ ¿É¼ÇÀ»\n"
-"¼±ÅÃÇϼ¼¿ä. ¿É¼ÇÀ» ¼±ÅÃÇϱâ Àü¿¡ ³×Æ®¿÷ ÀåÄ¡ÀÇ Àü¿øÀÌ µé¾î¿ÍÀÖ´ÂÁö\n"
-"È®ÀÎÇؼ­ µå·¹ÀÌÅ©X°¡ ÀÚµ¿°¨ÁöÇÒ ¼ö ÀÖµµ·Ï Çϼ¼¿ä.\n"
-"\n"
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º¿¡¼­´Â ¼³Ä¡½Ã¿¡ ÀÎÅÍ³Ý ¼³Á¤À» ÇÏ´Â °ÍÀÌ ¿©·¯ ¸ð·Î ÁÁ½À´Ï"
-"´Ù.\n"
-"À¯È¿ÇÑ ¿¬°á À¯Çü: ÀüÅëÀû ¸ðµ©, ISDN ¸ðµ©, ADSL ¿¬°á, ÄÉÀÌºí ¸ðµ©, LAN ¿¬°á(ÀÌ"
-"´õ³Ý)\n"
-"\n"
-"ÀÚ¼¼ÇÑ ¼³Á¤ »çÇ×Àº ¿©±â¼­ ¼³¸íµÇÁö ¾ÊÀ» °ÍÀÔ´Ï´Ù. ¸ðµç ÀÎÀڵ鿡 ´ëÇÑ Á¤º¸´Â\n"
-"ÀÎÅÍ³Ý ¼­ºñ½º °ø±ÞÀÚ³ª ³×Æ®¿÷ °ü¸®ÀÚ¿¡°Ô ¹®ÀÇÇؼ­ ¾Ë¾Æ º¸¼¼¿ä.\n"
-"\n"
-"»ç¿ëÀÚ ¼³¸í¼­¸¦ º¸¸é, ÀÎÅÍ³Ý ¿¬°á¿¡ ´ëÇÑ ÀÚ¼¼ÇÑ Á¤º¸¸¦ ¾òÀ» ¼ö ÀÖ½À´Ï´Ù.\n"
-"¶Ç´Â ½Ã½ºÅÛÀÌ ´Ù ¼³Ä¡µÉ ¶§±îÁö ±â´Ù¸° ÈÄ¿¡, ¼³¸í¼­¿¡ ³ª¿Í ÀÖ´Â ÇÁ·Î±×·¥À» »ç"
-"¿ëÇÏ¿©\n"
-"¿¬°áÀ» ¼³Á¤ÇÒ ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"\n"
-"³×Æ®¿÷ ¼³Á¤À» ¼³Ä¡°¡ ³¡³­ÈÄ¿¡ ÇÏ°í ½Í°Å³ª, ³×Æ®¿÷ ¼³Á¤À» ³¡¸¶Ä£ »óŶó¸é,\n"
-"¡¸Ãë¼Ò¡¹¸¦ ´­·¯¼­ °è¼Ó ÁøÇàÇϼ¼¿ä."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"ÀÌÁ¦ ºÎÆýÿ¡ ¾î¶² ¼­ºñ½º¸¦ ÀÚµ¿À¸·Î ½ÃÀÛÇÏ°Ô ÇÒÁö¸¦ ¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"ÇöÀç ¼³Ä¡µÈ ¸ðµç ¼­ºñ½ºµéÀÌ ¿©±â¿¡¼­ º¸¿©Áö°í ÀÖ½À´Ï´Ù.\n"
-"½ÅÁßÇÏ°Ô °ËÅäÇؼ­ ºÎÆýÿ¡ Ç×»ó ÇÊ¿ä·ÎÇÏ´Â °ÍÀÌ ¾Æ´Ï¶ó¸é ¼±ÅÃÀ» ÇØÁ¦Çϼ¼¿ä.\n"
-"\n"
-"¸¶¿ì½º¸¦ ¼­ºñ½º À̸§µé À§·Î ¿Ã¸®¸é, °¢ ¼­ºñ½º¿¡ ´ëÇÑ °£´ÜÇÑ ¼³¸íÀ» º¸¿© ÁÙ °Í"
-"ÀÔ´Ï´Ù.\n"
-"¸¸¾à ¾î¶² ¼­ºñ½º°¡ ÇÊ¿äÇÑ °ÍÀÎÁö ¾Æ´ÑÁö¸¦ Àß ¸ð¸£°Ú´Ù¸é,\n"
-"±âº»°ªÀ¸·Î ±×³É µÎ´Â °ÍÀÌ ¾ÈÀüÇÑ ¼±ÅÃÀÔ´Ï´Ù.\n"
-"\n"
-"ÀÌ ÄÄÇ»Å͸¦ ¼­¹ö¿ëÀ¸·Î »ç¿ëÇÏ·Á ÇÑ´Ù¸é, ÀÌ ´Ü°è¿¡¼­ ¸Å¿ì ÁÖÀÇÇØ¾ß ÇÕ´Ï´Ù.\n"
-"ÇÊ¿äÇÏÁö ¾ÊÀº ¼­ºñ½º°¡ ½ÃÀ۵Ǵ °ÍÀº ¹Ù¶÷Á÷ÇÏÁö ¾Ê½À´Ï´Ù. ÀϺΠ¼­ºñ½º´Â \n"
-"¼­¹ö»ó¿¡¼­ ½ÇÇڵȴٸé À§ÇèÇÒ ¼öµµ ÀÖ´Ù´Â °ÍÀ» ¸í½ÉÇϼ¼¿ä. ¿øÄ¢ÀûÀ¸·Î \n"
-"²À ÇÊ¿äÇÑ ¼­ºñ½ºµé¸¸ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-#, fuzzy
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X(X À©µµ¿ì ½Ã½ºÅÛ)Àº GNU/¸®´ª½º ±×·¡ÇÈ ÀÎÅÍÆäÀ̽ºÀÇ ÇÙ½ÉÀÔ´Ï´Ù.\n"
-"À̸¦ ±â¹ÝÀ¸·Î ¸Çµå·¹ÀÌÅ© ¸®´ª½º¿¡ Æ÷ÇÔµÈ ¸ðµç ±×·¡ÇÈȯ°æ(KDE, ±×³ð,\n"
-"¿¡ÇÁÅͽºÅÜ, À©µµ¿ì¸ÞÀÌÄ¿...)ÀÌ ÀÛµ¿ÇÕ´Ï´Ù. À̹ø ´Ü°è¿¡¼­ µå·¹ÀÌÅ©X´Â\n"
-"XÀÇ Áöµ¿ ¼³Á¤À» ½ÃµµÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¾ÆÁÖ ¿À·¡µÈ(¶Ç´Â ¾ÆÁÖ ÃÖ½ÅÀÇ) Çϵå¿þ¾î°¡ ¾Æ´Ï¶ó¸é, ¼³Á¤¿¡ ½ÇÆÐÇÒ ÀÏÀº\n"
-"°ÅÀÇ ¾øÀ» °ÍÀÔ´Ï´Ù. ¼³Á¤¿¡ ¼º°øÇϸé, ÇØ´ç ¸ð´ÏÅÍÀÇ Å©±â¿¡¼­ °¡´ÉÇÑ\n"
-"ÃÖ°í Çػ󵵷ΠÀÚµ¿ Å×½ºÆ®¸¦ ½ÃÀÛÇÒ °ÍÀÔ´Ï´Ù.\n"
-"Å×½ºÆ®¿¡¼­ âÀ» Çϳª ¶ç¿ì°í ´Ô¿¡°Ô º¸ÀÌ´ÂÁö Áú¹®ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¸¸¾à ¡¸Àü¹®°¡¡¹¸ðµå·Î ¼³Ä¡ ÁßÀ̶ó¸é, ´ÔÀº X¼³Á¤ ¸¶¹ý»ç·Î\n"
-"¾È³»µÉ °ÍÀÔ´Ï´Ù. ÀÌ ¸¶¹ý»ç¿¡ ´ëÇÑ ´õ ÀÚ¼¼ÇÑ Á¤º¸¸¦ º¸·Á¸é,\n"
-"»ç¿ëÀÚ ¼³¸í¼­ÀÇ ÇØ´ç ºÎºÐÀ» ÂüÁ¶Çϼ¼¿ä.\n"
-"\n"
-"¸¸¾à Å×½ºÆ® âÀÇ ±Û¾¾¸¦ º¼ ¼ö ÀÖ°í ¡¸¿¹¡¹¸¦ ´©¸£¸é, µå·¹ÀÌÅ©X´Â ´ÙÀ½ ´Ü°è·Î\n"
-"ÁøÇàÇÒ °ÍÀÔ´Ï´Ù. ¸¸¾à ±Û¾¾¸¦ ¾Ë¾Æº¼ ¼ö ¾ø´Ù¸é, ¼³Á¤ÀÌ Àß ¸øµÇ¾ú´Ù´Â °ÍÀ»\n"
-"ÀǹÌÇÕ´Ï´Ù. Å×½ºÆ®´Â 10ÃÊÈÄ¿¡ È­¸éÀ» º¹±¸Çϸ鼭 ÀÚµ¿À¸·Î\n"
-"Á¾·áÇÕ´Ï´Ù."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"óÀ½ X ¼³Á¤À» ½ÃµµÇÒ ¶§, È­¸éÀÌ ÀÌ»óÇÏ°Ô º¸ÀÏ ¼ö ÀÖ½À´Ï´Ù.\n"
-"(È­¸éÀÌ ³Ê¹« À۰ųª, ¿À¸¥ÂÊ È¤Àº ¿ÞÂÊÀ¸·Î Ä¡¿ìÃÄ ÀÖÀ» ¼ö ÀÖ½À´Ï´Ù.)\n"
-"±×·¸±â ¶§¹®¿¡, ºñ·Ï X°¡ Á¤»ó ½ÇÇàµÇ´õ¶óµµ µå·¹ÀÌÅ©X´Â ´Ô²² ÀûÀýÇÑ\n"
-"¼³Á¤ÀÎÁö¸¦ Áú¹®ÇÒ °ÍÀÔ´Ï´Ù. ¶ÇÇÑ ´ÔÀÌ ¼±ÅÃÇÒ ¼ö ÀÖ´Â À¯È¿ÇÑ È­¸é¸ðµåµéÀÇ\n"
-"¸ñ·ÏÀ» Ç¥½ÃÇؼ­ Á÷Á¢ º¯°æÇÒ ¼ö ÀÖ°Ô ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"¾Æ¹«¸® Çصµ X°¡ Á¤»óÀûÀ¸·Î ÀÛµ¿µÇ°Ô ÇÒ ¼ö ¾ø´Ù¸é, ¡¸±×·¡ÇÈ Ä«µå º¯°æ¡¹À» ¼±ÅÃ"
-"ÇÏ°í\n"
-"¡¸¸ñ·Ï¿¡ ¾ø´Â Ä«µå¡¹¸¦ ¼±ÅÃÇϼ¼¿ä. ±×¸®°í ¼­¹ö Á¾·ù¸¦ Áú¹®ÇÒ ¶§, ¡¸FBDev¡¹"
-"¸¦\n"
-"¼±ÅÃÇϼ¼¿ä. ÀÌ°ÍÀº ¾ÈÀü¸ðµå ¿É¼ÇÀ̸ç ÇöÀçÀÇ ¸ðµç ±×·¡ÇÈ Ä«µå¿Í ȣȯµË´Ï´Ù.\n"
-"±×¸®°í ³ª¼­, ¡¸´Ù½Ã Å×½ºÆ®¡¹¸¦ ¼±ÅÃÇÏ¿© È®ÀÎÇϼ¼¿ä."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"¸¶Áö¸·À¸·Î, ºÎÆýÿ¡ ÀÚµ¿À¸·Î ±×·¡ÇÈ È¯°æÀ» »ç¿ëÇÒ °ÍÀÎÁö¸¦ Áú¹®ÇÒ °ÍÀÔ´Ï"
-"´Ù.\n"
-"ÁÖÀÇ: ÀÌ Áú¹®Àº ¼³Á¤À» Å×½ºÆ®ÇÏÁö ¾Ê¾ÒÀ»Áö¶óµµ ³ªÅ¸³ª°Ô µÉ °ÍÀÔ´Ï´Ù.\n"
-"½Ã½ºÅÛÀ» È®½ÇÈ÷ ¼­¹ö¿ëÀ¸·Î »ç¿ëÇÒ °ÍÀ̰ųª, È­¸é ¼³Á¤¿¡ ¼º°øÇÏÁö ¸øÇÑ °æ¿ì¶ó"
-"¸é\n"
-"¡¸¾Æ´Ï¿À¡¹¸¦ ´©¸£¼¼¿ä."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"ÀÌÁ¦ Çϵåµð½ºÅ©ÀÇ ¾îµð¿¡ ¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦ ¼³Ä¡ÇÒÁö¸¦\n"
-"¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù. ¸¸¾à Çϵåµð½ºÅ©°¡ ¿ÏÀüÈ÷ ºñ¾î Àְųª ¶Ç´Â\n"
-"´Ù¸¥ ¿î¿µÃ¼Á¦°¡ Çϵåµð½ºÅ© Àüü¸¦ Á¡À¯ÇÏ°í ÀÖ´Ù¸é, ÆÄƼ¼ÇÀ»\n"
-" ³ª´©¾î¾ß ÇÕ´Ï´Ù. ÆÄƼ¼ÇÀ» ³ª´«´ÙÇÔÀº ¸®´ª½º ¸Çµå·¹ÀÌÅ©°¡\n"
-"¼³Ä¡µÉ °ø°£À» È®º¸Çϱâ À§ÇÏ¿© µð½ºÅ©¸¦ ³í¸®ÀûÀ¸·Î ºÐÇÒÇÑ´Ù´Â ÀǹÌÀÔ´Ï´Ù.\n"
-"\n"
-"ÀϹÝÀûÀ¸·Î ÆÄƼ¼Ç °úÁ¤À» °ÅÃÄ ¹ö¸®¸é ±âÁ¸ µ¥ÀÌÅÍÀÇ º¹±¸°¡ ºÒ°¡´ÉÇØÁö±â\n"
-"¶§¹®¿¡,Ãʺ¸ÀÚ¿¡°Ô´Â °í¹Î½º·´°í °ÆÁ¤½º·¯¿î ÀÛ¾÷ÀÔ´Ï´Ù. ÇÏÁö¸¸ ¸¶¹ý»ç¸¦\n"
-"»ç¿ëÇϸé ÀÌ ÀÛ¾÷À» ½±°Ô ÇÒ ¼ö ÀÖ½À´Ï´Ù. ½ÃÀÛÇϱâ Àü¿¡, ÃæºÐÇÑ ½Ã°£À» °¡Áö°í\n"
-"»ç¿ëÀÚ ¼³¸í¼­¸¦ ÀÐ¾î º¸¼¼¿ä.\n"
-"\n"
-"ÇöÀç Àü¹®°¡ ¸ðµå·Î ¼³Ä¡¸¦ ÁøÇà ÁßÀ̶ó¸é, ¸®´ª½º ¸Çµå·¹ÀÌÅ©ÀÇ ÆÄƼ¼Ç ºÐÇÒ µµ±¸"
-"ÀÎ\n"
-"µð½ºÅ©µå·¹ÀÌÅ©¸¦ ¸¸³ª°Ô µÉ °ÍÀÔ´Ï´Ù. ÀÌ µµ±¸´Â ÆÄƼ¼Çµå¸£ÀÌ ¼¼¹ÐÇÑ Á¶Á¤À» °¡"
-"´ÉÇÏ°Ô\n"
-"ÇÕ´Ï´Ù. ¼³¸í¼­ÀÇ µð½ºÅ©µå·¹ÀÌÅ© ÀåÀ» º¸¼¼¿ä; »ç¿ë¹ýÀÌ µ¿ÀÏÇÕ´Ï´Ù. À§¿¡¼­ ¾ð±Þ"
-"ÇßµíÀÌ\n"
-"È­¸é¿¡ ÀÖ´Â ¡¸¸¶¹ý»ç¡¹¹öÆ°À» ´­·¯¼­, ÆÄƼ¼Ç ºÐÇÒ ÀÛ¾÷À» À§ÇÑ ¸¶¹ý»ç¸¦\n"
-"½ÇÇàÇÒ ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"\n"
-"¸¸¾à ÀÌÀü¿¡ ¸®´ª½º¸¦ ¼³Ä¡ÇÑ ÀûÀÌ Àְųª ´Ù¸¥ ÆÄƼ¼Ç µµ±¸·Î ¸¸µé¾î ³õÀº ¸®´ª½º"
-"¿ë\n"
-"ÆÄƼ¼ÇµéÀÌ ÀÌ¹Ì Á¸ÀçÇÑ´Ù¸é, ¸®´ª½º ¼³Ä¡¿¡ »ç¿ëÇÒ ÆÄƼ¼ÇµéÀ»\n"
-"¼±Åø¸ ÇÏ¸é µË´Ï´Ù.\n"
-"\n"
-"¸¸¾à ¾ÆÁ÷ ¸®´ª½º¿ë ÆÄƼ¼ÇÀÌ ¾ø´Ù¸é, »õ·Î ¸¸µé¾î¾ß ÇÕ´Ï´Ù. ±×·¯±â À§Çؼ­´Â\n"
-"À§¿¡ ÀÖ´Â ¸¶¹ý»ç¸¦ »ç¿ëÇϼ¼¿ä. Çϵåµð½ºÅ©ÀÇ ¼³Á¤¿¡ µû¶ó ´ÙÀ½°ú °°Àº\n"
-"¸î °¡ÁöÀÇ ¹æ¹ýÀÌ ÀÖ½À´Ï´Ù:\n"
-"\n"
-" ¡Û ºó °ø°£ »ç¿ë: ºó µð½ºÅ©ÀÇ ÀÚµ¿ ÆÄƼ¼Ç ºÐÇÒ ÀÛ¾÷À» ÇÏ°Ô µË´Ï´Ù.\n"
-"ÆÄƼ¼Ç ºÐÇÒ ÀÛ¾÷¿¡ ´ëÇØ ´õ ÀÌ»ó ½Å°æ¾µ ÇÊ¿ä°¡ ¾ø°Ô µË´Ï´Ù.\n"
-"\n"
-" ¡Û ±âÁ¸ ÆÄƼ¼Ç »ç¿ë: ¸¶¹ý»ç°¡ ±âÁ¸ÀÇ ¸®´ª½º ÆÄƼ¼ÇÀ» ¹ß°ßÇÑ °æ¿ìÀÔ´Ï´Ù.\n"
-"±âÁ¸ÀÇ ÆÄƼ¼Ç¿¡´Ù°¡ ¸®´ª½º¸¦ ¼³Ä¡ÇÒ·Á¸é, ÀÌ°ÍÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-" ¡Û À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ ºó °ø°£ »ç¿ë: ¸¸¾à MS À©µµ¿ìÁî°¡ ¼³Ä¡µÇ¾î ÀÖ°í ¸ðµç µð½º"
-"Å© °ø°£À» »ç¿ëÇÏ°í ÀÖ´Ù¸é,\n"
-"¸®´ª½º¿ë °ø°£À» »õ·Î ¸¸µé¾î¾ß ÇÕ´Ï´Ù. ÀÌ·¸°Ô ÇϱâÀ§Çؼ­´Â, À©µµ¿ìÁî ÆÄƼ¼ÇÀ» "
-"Áö¿ì°Å³ª(¡¸Àüü µð½ºÅ© »èÁ¦¡¹\n"
-"¿Í ¡¸Àü¹®°¡ ¸ðµå¡¹ºÎºÐÀ» ÂüÁ¶Çϼ¼¿ä.), À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ Å©±â¸¦ ÀçÁ¶Á¤ÇÏ¿© °ø"
-"°£À» È®º¸ÇÒ ¼ö ÀÖ½À´Ï´Ù. À©µµ¿ìÁî\n"
-"ÆÄƼ¼ÇÀÇ ÀçÁ¶Á¤Àº ±âÁ¸ÀÇ µ¥ÀÌÅ͸¦ Æı«ÇÏÁö ¾Ê±â ¶§¹®¿¡, À©µµ¿ìÁî¿Í ¸®´ª½º ¸Ç"
-"µå·¹ÀÌÅ©¸¦ ÇÑ ÄÄÇ»ÅÍ¿¡¼­ ÇÔ²²\n"
-"»ç¿ëÇÏ°íÀÚ ÇÑ´Ù¸é  ÀÌ°ÍÀÌ ±ÇÀåµÇ´Â ¹æ¹ýÀÔ´Ï´Ù.\n"
-"\n"
-"ÀÌ ¹æ¹ýÀ» ¼±ÅÃÇÑ´Ù¸é, À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ Å©±â°¡ ÇöÀ纸´Ù ÁÙ¾îµé±â ¶§¹®¿¡ À©µµ"
-"¿ìÁ\n"
-"»ç¿ëÇÒ ¶§¿¡´Â ¼ÒÇÁÆ®¿þ¾î¸¦ ¼³Ä¡Çϰųª µ¥ÀÌÅ͸¦ ÀúÀåÇÒ ºó °ø°£ÀÌ ±×¸¸Å­ Àû¾îÁø"
-"´Ù´Â\n"
-"°ÍÀ» À¯³äÇϼ¼¿ä.\n"
-"\n"
-" ¡Û Àüü µð½ºÅ© »èÁ¦: ¸¸¾à µð½ºÅ©»óÀÇ ¸ðµç ±âÁ¸ ÆÄƼ¼Ç°ú µ¥ÀÌÅ͸¦ »èÁ¦ÇÏ°í\n"
-"¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦ À§ÇÑ ÆÄƼ¼ÇÀ¸·Î ¹Ù²Ù°í ½Í´Ù¸é, ÀÌ°ÍÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"ÁÖÀÇÇϼ¼¿ä: ÀÏ´Ü ÀÌ·¸°Ô ÇÏ°í³ª¸é ´Ù½Ã µÇµ¹¸± ¼ö ¾ø½À´Ï´Ù.\n"
-"\n"
-"   !! ÀÌ ¿É¼ÇÀ» ¼±ÅÃÇÏ°Ô µÇ¸é, µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ°¡ ¼Õ½ÇµË´Ï´Ù. !!\n"
-"\n"
-" ¡Û À©µµ¿ìÁî Á¦°Å: µð½ºÅ©»óÀÇ ¸ðµç ÆÄƼ¼ÇÀ» »èÁ¦ÇÏ°í, ÃʱâÈ­µÈ µð½ºÅ© »óÅ¿¡"
-"¼­\n"
-"ÆÄƼ¼Ç ÀÛ¾÷À» ´Ù½Ã ÇÕ´Ï´Ù. µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ´Â ¼Õ½ÇµË´Ï´Ù.\n"
-"\n"
-"   !! ÀÌ ¿É¼ÇÀ» ¼±ÅÃÇÏ°Ô µÇ¸é, µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ°¡ ¼Õ½ÇµË´Ï´Ù. !!\n"
-"\n"
-" ¡Û Àü¹®°¡ ¸ðµå: ¸¸¾à ¼öµ¿À¸·Î ÆÄƼ¼Ç ÀÛ¾÷À» ÇÏ°íÀÚ ÇÑ´Ù¸é, ÀÌ°ÍÀ» ¼±ÅÃÇϼ¼"
-"¿ä.\n"
-"ÀÌ ¹æ¹ýÀº ´ë´ÜÈ÷ °­·ÂÇÏÁö¸¸ ¶ÇÇÑ À§ÇèÇÒ ¼ö ÀÖ´Ù´Â °ÍÀ» ¸í½ÉÇϼ¼¿ä. ½±°Ô µ¥ÀÌ"
-"Å͸¦\n"
-"ÀÒ¾î ¹ö¸± ¼ö ÀÖ½À´Ï´Ù. Àü¹®ÀûÀÎ Áö½ÄÀÌ ¾ø´Ù¸é, ÀÌ ¹æ¹ýÀº Àý´ë ¼±ÅÃÇÏÁö ¸¶¼¼"
-"¿ä."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"¼³Ä¡¸¦ ¿Ï·áÇÏ¿´½À´Ï´Ù. ´ÔÀÇ GNU/¸®´ª½º ½Ã½ºÅÛÀº ÀÌÁ¦ »ç¿ëÇÒ Áغñ°¡\n"
-"µÇ¾ú½À´Ï´Ù. ½Ã½ºÅÛÀ» ´Ù½Ã ºÎÆÃÇÏ·Á¸é ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"ÄÄÇ»ÅÍ°¡ ´Ù½Ã ºÎÆõǸé, (´ÙÁß ºÎÆÃÀÌ ¼³Á¤µÇ¾úÀ» °æ¿ì¿¡) ´ÔÀÌ ¼±È£ÇÏ´Â\n"
-"¿î¿µÃ¼Á¦¸¦ ½ÃÀÛÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"¡¸°í±Þ¡¹¹öÆ°(Á¡¹®°¡ ¸ðµå¿¡¸¸ ÀÖÀ½)À» ´©¸£¸é µÎ °³ÀÇ Ãß°¡ ¹öÆ°ÀÌ ³ªÅ¸³Ò´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇÇ »ý¼º¡¹: ´ÔÀÌ Áö±Ý±îÁö ¼³Ä¡ÇÑ ³»¿ëÀ» °ü¸®ÀÚÀÇ º°´Ù¸¥\n"
-"µµ¿ò¾øÀÌ ÀÚµ¿À¸·Î Àüü ¼³Ä¡¸¦ ¼öÇàÇÏ°Ô ÇÏ´Â\n"
-"ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇÇ µð½ºÅ©¸¦ ¸¸µì´Ï´Ù.\n"
-"\n"
-"    ÁÖÀÇ: ¹öÆ°À» ´©¸£¸é µÎ °³ÀÇ °³º°ÀûÀÎ ¿É¼ÇÀÌ ³ªÅ¸³³´Ï´Ù:\n"
-"\n"
-"    ¡Û ¡¸Àç»ý¡¹: ÆÄƼ¼Ç ³ª´©±â ÀÛ¾÷¸¸ Á¦¿ÜÇÏ°í, ³ª¸ÓÁö °úÁ¤Àº ÀÚµ¿¼³Ä¡·Î\n"
-"¼öÇàÇÏ´Â ÀÚµ¿¼³Ä¡ Ç÷ÎÇǸ¦ ¸¸µì´Ï´Ù.\n"
-"\n"
-"    ¡Û ¡¸ÀÚµ¿È­¡¹: µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅ͸¦ »èÁ¦ÇÏ°í ¸ðµç ÆÄƼ¼ÇÀÌ ´Ù½Ã\n"
-"¸¸µé¾îÁö´Â ¿Ïº®ÇÑ ÀÚµ¿ ¼³Ä¡¸¦ ¼öÇàÇÏ´Â Ç÷ÎÇǸ¦ ¸¸µì´Ï´Ù.\n"
-"\n"
-"    ÀÌ ±â´ÉÀ» »ç¿ëÇϸé, ¸¹Àº ¼öÀÇ ºñ½ÁÇÑ ÄÄÇ»ÅÍ¿¡ ¼³Ä¡ÀÛ¾÷À» ÇÒ ¶§ Æí¸®ÇÕ´Ï"
-"´Ù.\n"
-"    ÀÚ¼¼ÇÑ Á¤º¸´Â ÀúÈñ À¬»çÀÌÆ®ÀÇ ÀÚµ¿¼³Ä¡°ü·Ã ºÎºÐÀ» ÂüÁ¶Çϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸ÆÑÅ°Áö ¼±ÅûçÇ× ÀúÀ塹(*): ¾Õ ´Ü°è¿¡¼­ ¼±ÅÃÇÑ ÆÑÅ°Áö ¸ñ·ÏÀ» ÀúÀåÇÕ´Ï"
-"´Ù.\n"
-"¶Ç ´Ù¸¥ ¼³Ä¡¸¦ ¼öÇàÇÒ ¶§, Ç÷ÎÇǸ¦ µå¶óÀ̺꿡 ³Ö°í, [F1]Å°¸¦ ´­·¯¼­\n"
-"¼³Ä¡ È­¸éÀÌ µµ¿ò¸» È­¸éÀ¸·Î µé¾î°¡°Ô ÇÑÈÄ, ¡¸linux defcfg=\"floppy\"¡¹¶ó°í\n"
-"ÀÔ·ÂÇϼ¼¿ä.\n"
-"\n"
-"(*) ´ÔÀº FATÀ¸·Î Æ÷¸ËµÈ Ç÷ÎÇÇ Çϳª¸¦ °¡Áö°í ÀÖ¾î¾ß ÇÕ´Ï´Ù.\n"
-"      (¸®´ª½º¿¡¼­ Æ÷¸ËÇÏ·Á¸é, ¡¸mformat a:¡¹¸í·ÉÀ» »ç¿ëÇϼ¼¿ä.)"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"»õ·Î ¸¸µé¾îÁø ÆÄƼ¼ÇµéÀº Æ÷¸ËµÇ¾îÁ®¾ß ÇÕ´Ï´Ù.\n"
-"(Æ÷¸ËÀ̶ó ÇÔÀº ÆÄÀÏ ½Ã½ºÅÛÀ» ¸¸µç´Ù´Â ÀǹÌÀÔ´Ï´Ù.)\n"
-"\n"
-"Áö±Ý ±âÁ¸ÀÇ µ¥ÀÌÅ͸¦ »èÁ¦Çϱâ À§Çؼ­ ±âÁ¸ ÆÄƼ¼ÇµéÀ»\n"
-"´Ù½Ã Æ÷¸ËÇÒ ¼öµµ ÀÖ½À´Ï´Ù. ±×·¸°Ô ÇÏ°í ½Í´Ù¸é, ÇØ´ç ÆÄƼ¼Çµéµµ\n"
-"¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"ÁÖÀÇ: ¸ðµç ±âÁ¸ ÆÄƼ¼ÇµéÀ» ´Ù½Ã Æ÷¸ËÇÒ ÇÊ¿ä´Â ¾ø½À´Ï´Ù.\n"
-"(¡¸/¡¹,¡¸/usr¡¹,¡¸/var¡¹¿Í °°Àº) ¿î¿µÃ¼Á¦¸¦ ´ã°í ÀÖ´Â ÆÄƼ¼ÇµéÀº\n"
-"´Ù½Ã Æ÷¸ËÇÏ´õ¶óµµ, (¡¸/home¡¹°ú °°Àº) µ¥ÀÌÅ͸¦ ´Ü°í ÀÖ´Â ÆÄƼ¼ÇµéÀº\n"
-", ±âÁ¸ µ¥ÀÌÅ͸¦ º¸Á¸ÇÏ°í ½ÍÀ» °æ¿ì, ´Ù½Ã Æ÷¸ËÇÒ ÇÊ¿ä°¡ ¾ø½À´Ï´Ù.\n"
-"\n"
-"ÆÄƼ¼ÇµéÀ» ¼±ÅÃÇÒ ¶§ ÁÖÀÇÇϼ¼¿ä. ÀÏ´Ü Æ÷ÆÑÀÌ µÇ°í³ª¸é,\n"
-"¼±Åõƴø ÆÄƼ¼Ç»ó¿¡ Á¸ÀçÇß´ø ¸ðµç µ¥ÀÌÅÍ´Â »èÁ¦µÇ¸ç,\n"
-"º¹±¸°¡ ºÒ°¡´ÉÇØ Áý´Ï´Ù.\n"
-"\n"
-"Æ÷¸ËÇÒ Áغñ°¡ µÇ¾úÀ¸¸é, ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"\n"
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º ¼³Ä¡¿ë ÆÄƼ¼ÇÀ» ´Ù½Ã ¼±ÅÃÇÏ°í ½Í´Ù¸é,\n"
-"¡¸Ãë¼Ò¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-"µð½ºÅ©»óÀÇ ¼Õ»óµÈ ºí·°À» üũÇϸç Æ÷¸ËÇÏ°í ½Í´Ù¸é,\n"
-"¡¸°í±Þ¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Áö±Ý »õ ¸®´ª½º ¸Çµå·¹ÀÌÅ© ¿î¿µÃ¼Á¦¸¦ ¼³Ä¡ÇÏ°í ÀÖ½À´Ï´Ù.\n"
-"ÀÌ ÀÛ¾÷À» ³¡³»±â À§Çؼ­´Â ½Ã°£ÀÌ Á» °É¸³´Ï´Ù.\n"
-"ÃÑ¼Ò¿ä ½Ã°£Àº ¼±ÅÃÇÑ ÆÑÅ°ÁöÀÇ ¾ç°ú ÄÄÇ»ÅÍ ¼º´É¿¡ µû¶ó Å©°Ô ´Þ¶óÁú ¼ö ÀÖ½À´Ï"
-"´Ù.\n"
-"\n"
-"Àγ»½ÉÀ» °¡Áö¼¼¿ä."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"´õ ÁøÇàÇϱâ Àü¿¡ »ç¿ëÀÚ °è¾à¼­¸¦ ÀÚ¼¼ÇÏ°Ô ÀÐ¾î º¸¼¼¿ä.\n"
-"»ç¿ëÀÚ °è¾à¼­´Â Àüü ¸Çµå·¹ÀÌÅ© ¸®´ª½º ¹èÆ÷º»À» Æ÷°ýÇÏ´Â ³»¿ëÀ̸ç,\n"
-"¸¸¾à µ¿ÀÇÇÏÁö ¾ÊÀ¸½Å´Ù¸é ¡¸°ÅºÎ¡¹¹öÆ°À» ´©¸£¼¼¿ä. °ÅºÎ ¹öÆ°Àº ÇöÀç ¼³Ä¡¸¦\n"
-"Áï°¢ Á¾·áÇÏ°Ô ÇÕ´Ï´Ù. ¼³Ä¡¸¦ °è¼ÓÇÏ°í ½Í´Ù¸é ¡¸µ¿ÀÇ¡¹¹öÆ°À» ´©¸£¼¼¿ä."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"ÀÌÁ¦ ÄÄÇ»ÅÍÀÇ º¸¾È ¼öÁØÀ» ¼±ÅÃÇÒ ´Ü°èÀÔ´Ï´Ù.\n"
-"ÀÚÀ¯·Î¿î »ç¿ëÀ» À§Çؼ­´Â ÄÄÇ»ÅÍ°¡ º¸´Ù ´õ ¸¹ÀÌ °³¹æµÇ¾îÁ®¾ß Çϸç,\n"
-"ÀúÀåµÈ µ¥ÀÌÅÍÀÇ Á߿伺ÀÌ Å©¸é Ŭ¼ö·Ï, ´õ ³ôÀº º¸¾È ¼öÁØÀÌ À¯ÁöµÇ¾î¾ß ÇÕ´Ï"
-"´Ù.\n"
-"±×·¯³ª ÀϹÝÀûÀ¸·Î º¸´Ù ³ôÀº º¸¾È ¼öÁØÀº º¸´Ù ¸¹Àº »ç¿ë»óÀÇ ºÒÆíÇÔÀ» °¨¼öÇؾß"
-"¸¸\n"
-"ÀÌ·ç¾îÁú ¼ö ÀÖÀ½À» À¯³äÇϼ¼¿ä. °¢ º¸¾È ¼öÁØÀÌ ÀǹÌÇÏ´Â ¹Ù¿¡ ´ëÇÑ ÀÚ¼¼ÇÑ Á¤º¸"
-"¸¦\n"
-"¾Ë°í ½Í´Ù¸é ¡¸»ç¿ëÀÚ Áöħ¼­¡¹ÀÇ MSEC ÀåÀ» ÂüÁ¶Çϼ¼¿ä.\n"
-"\n"
-"¾î´À °ÍÀ» ¼±ÅÃÇØ¾ß ÇÒÁö Àß ¸ð¸£°Ú´Ù¸é, ±âº»°ªÀ» À¯ÁöÇϼ¼¿ä."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"ÀÌÁ¦ ¾î´À ÆÄƼ¼ÇÀÌ ¸Çµå·¹ÀÌÅ© ¸®´ª½ºÀÇ ¼³Ä¡¿ëÀ¸·Î »ç¿ëµÇ¾î¾ß ÇÒÁö¸¦\n"
-"¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù. ÀÌÀü¿¡ ´Ù¸¥ GNU/¸®´ª½º¸¦ ¼³Ä¡ÇÑ ÀûÀÌ Àְųª, ´Ù¸¥ ÆÄƼ¼Ç\n"
-"µµ±¸¸¦ »ç¿ëÇÏ¿© ÀÌ¹Ì ÆÄƼ¼ÇµéÀÌ Á¤ÀǵǾî ÀÖ´Ù¸é, ±âÁ¸ ÆÄƼ¼ÇÀ» ±×´ë·Î »ç¿ë\n"
-"ÇÒ ¼ö ÀÖ½À´Ï´Ù. ±×·¸Áö ¾Ê´Ù¸é Çϵåµð½ºÅ©ÀÇ ÆÄƼ¼ÇµéÀ» Áö±Ý ¸¸µé¾î¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"ÆÄƼ¼ÇÀ» ¸¸µé·Á¸é, ¸ÕÀú Çϵåµð½ºÅ©¸¦ ¼±ÅÃÇϼ¼¿ä. ÆÄƼ¼ÇÀ» ¸¸µé¿©´Â Çϵåµð½ºÅ©"
-"°¡\n"
-"ù ¹ø° IDE µð½ºÅ©¶ó¸é ¡¸hda¡¹, µÎ ¹ø° IDE µð½ºÅ©¶ó¸é ¡¸hdb¡¹¿Í °°Àº ½ÄÀÌ"
-"¸ç,\n"
-"ù ¹ø° SCSI µð½ºÅ©¶ó¸é ¡¸sda¡¹¿Í °°Àº ½ÄÀÔ´Ï´Ù.\n"
-"\n"
-"ÆÄƼ¼ÇÀ» ³ª´­ ¶§, ´ÙÀ½ ¿É¼ÇÀ» »ç¿ëÇÒ ¼ö ÀÖ½À´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸¸ðµÎ »èÁ¦¡¹: ¼±ÅÃµÈ µð½ºÅ©ÀÇ ¸ðµç ±âÁ¸ ÆÄƼ¼ÇÀ» »èÁ¦ÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸ÀÚµ¿ ÇҴ硹: ¼±ÅÃµÈ µð½ºÅ©ÀÇ ºó °ø°£¿¡ ÀÚµ¿À¸·Î EXT2¿Í ½º¿Ò ÆÄƼ¼ÇÀ»\n"
-"ÇÒ´çÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸ÆÄƼ¼Ç Å×ÀÌºí º¹±¸¡¹: ÆÄƼ¼Ç Å×À̺íÀÌ ¼Õ»óµÇ¾î ÀÖÀ» °æ¿ì, ÀÌ ¿É¼ÇÀ¸·Î\n"
-"¼Õ»êµÈ Å×À̺íÀ» º¹±¸ÇÕ´Ï´Ù. !!ÁÖÀÇ!! º¹±¸½Ãµµ°¡ ½ÇÆÐÇÒ ¼öµµ ÀÖ´Ù´Â °ÍÀ»\n"
-"¸í½ÉÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸µÇµ¹¸®±â¡¹: º¯°æ »çÇ×À» Ãë¼ÒÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸´Ù½Ã Àб⡹: ¸ðµç º¯°æ »çÇ×À» Ãë¼ÒÇÏ°í, Ãʱâ ÆÄƼ¼Ç Å×À̺íÀ» ´Ù½Ã ÀнÀ"
-"´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸¸¶¹ý»ç¡¹: ¸¶¹ý»ç¸¦ ½ÇÇàÇÏ¿© ÆÄƼ¼ÇÀ» ³ª´¯´Ï´Ù. ÆÄƼ¼Ç ³ª´©±â¿¡ ´ëÇÑ Áö"
-"½ÄÀÌ\n"
-"ºÎÁ·ÇÏ´Ù¸é, ÀÌ ¿É¼ÇÀ» »ç¿ëÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸Ç÷ÎÇǷκÎÅÍ º¹±¸¡¹: ÀÌÀü¿¡ Ç÷ÎÇÇ¿¡ ÀúÀåÇصРÆÄƼ¼Ç Á¤º¸À» »ç¿ëÇÏ¿©\n"
-"ÆÄƼ¼Ç Å×À̺íÀ» º¹±¸ÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸Ç÷ÎÇÇ¿¡ ÀúÀ塹: ÆÄƼ¼Ç Á¤º¸¸¦ Ç÷ÎÇÇ¿¡ ÀúÀåÇÕ´Ï´Ù. ´ÙÀ½¿¡ ÆÄƼ¼Ç Å×ÀÌ"
-"ºíÀ» º¹±¸ÇÒ\n"
-"ÀÏÀÌ »ý±æ ¶§ »ç¿ëµË´Ï´Ù. ÀÌ °úÁ¤À» ¼öÇàÇÒ °ÍÀ» ±ÇÀåÇÏ´Â ¹ÙÀÔ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸¿Ï·á¡¹: ÆÄƼ¼Ç ³ª´©±â ÀÛ¾÷À» ³¡¸¶Ä¡¸é, ÀÌ ¿É¼ÇÀ¸·Î º¯°æ »çÇ×À» ÀúÀåÇÕ´Ï"
-"´Ù.\n"
-"\n"
-"Á¤º¸: Å°º¸µå·Î ¿É¼ÇÀ» ¼±ÅÃÇÒ ¼öµµ ÀÖ½À´Ï´Ù. ÆÄƼ¼Çµé°£ÀÇ À̵¿Àº [Tab]Å°¿Í\n"
-"[Up/Down]Å°¸¦ »ç¿ëÇϼ¼¿ä.\n"
-"\n"
-"ÆÄƼ¼ÇÀ» ¼±ÅÃÇÏ°í ³­ ÈÄ¿¡´Â ´ÙÀ½ Å°¸¦ »ç¿ëÇÒ ¼ö ÀÖ½À´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸Ctrl + c¡¹: (ºó ÆÄƼ¼ÇÀÌ ¼±ÅÃµÈ °æ¿ì,) »õ ÆÄƼ¼Ç ¸¸µé±â.\n"
-"\n"
-"  ¡Û ¡¸Ctrl + d¡¹: ÆÄƼ¼Ç »èÁ¦Çϱâ.\n"
-"\n"
-"  ¡Û ¡¸Ctrl + m¡¹: ¸¶¿îÆ® À§Ä¡ ÁöÁ¤Çϱâ.\n"
-"\n"
-"¸¸¾à PPC ÄÄÇ»ÅÍ¿¡¼­ ¼³Ä¡ÇÏ°í ÀÖ´Â ÁßÀ̶ó¸é, YABOOT ºÎÆ®·Î´õ°¡ »ç¿ëÇÒ ÃÖ¼Ò "
-"1MB\n"
-"ÀÇ HFS ¡¸ºÎÆ®½ºÆ®·¦¡¹ÆÄƼ¼ÇÀ» ¸¸µé ÇÊ¿ä°¡ ÀÖ½À´Ï´Ù. ¸¸¾à ±× ÆÄƼ¼ÇÀ» º¸´Ù Å©"
-"°Ô\n"
-"(°¡·É, 50MB) ¸¸µé¸é, ÀÀ±Þ »óȲ½Ã¿¡ »ç¿ëÇÒ ¿©ºÐÀÇ Ä¿³Î°ú ·¥µð½ºÅ© À̹ÌÁö¸¦\n"
-"ÀúÀåÇÒ ¼ö ÀÖ´Â À¯¿ëÇÑ Àå¼Ò°¡ µÉ °ÍÀÔ´Ï´Ù."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"µÑ ÀÌ»óÀÇ MS À©µµ¿ìÁî ÆÄƼ¼ÇÀÌ µð½ºÅ©»ó¿¡¼­ ¹ß°ßµÇ¾ú½À´Ï´Ù.\n"
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º ¿î¿µÃ¼Á¦¸¦ ¼³Ä¡Çϱâ À§ÇØ Å©±â¸¦ Á¶Á¤ÇÒ\n"
-"ÆÄƼ¼ÇÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"°¢ ÆÄƼ¼ÇÀº ´ÙÀ½°ú °°ÀÌ ¿­°ÅµË´Ï´Ù: ¡¸¸®´ª½º À̸§¡¹,¡¸À©µµ¿ìÁî À̸§¡¹,\n"
-"¡¸¿ë·®¡¹.\n"
-"\n"
-"¡¸¸®´ª½º À̸§¡¹¿µ¿ªÀÇ ±¸Á¶: ¡¸Çϵåµð½ºÅ© À¯Çü¡¹,¡¸Çϵåµð½ºÅ© ¹øÈ£¡¹,\n"
-"¡¸ÆÄƼ¼Ç ¹øÈ£¡¹(°¡·É, ¡¸hda1¡¹).\n"
-"\n"
-"¡¸Çϵåµð½ºÅ© À¯Çü¡¹Àº, IDE µð½ºÅ©ÀÏ °æ¿ì¿¡´Â ¡¸hd¡¹À̸ç,\n"
-"SCSI µð½ºÅ©ÀÏ °æ¿ì¿¡´Â ¡¸sd¡¹ÀÔ´Ï´Ù.\n"
-"\n"
-"¡¸Çϵåµð½ºÅ© ¹øÈ£¡¹´Â Ç×»ó ¡¸hd¡¹¶Ç´Â ¡¸sd¡¹µÚ¿¡ ¿À´Â ¹®ÀÚÀÔ´Ï´Ù.\n"
-"IDE Çϵåµð½ºÅ©ÀÇ °æ¿ì:\n"
-"\n"
-"  ¡Û ¡¸a¡¹´Â ¡¸ÁÖ IDE Á¦¾î±â»óÀÇ ÁÖ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸b¡¹´Â ¡¸ÁÖ IDE Á¦¾î±â»óÀÇ º¸Á¶ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸c¡¹´Â ¡¸º¸Á¶ IDE Á¦¾î±â»óÀÇ ÁÖ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸d¡¹´Â ¡¸º¸Á¶ IDE Á¦¾î±â»óÀÇ º¸Á¶ µð½ºÅ©¡¹¸¦ ÀǹÌÇÕ´Ï´Ù.\n"
-"\n"
-"SCSI Çϵåµð½ºÅ©ÀÇ °æ¿ì, ¡¸a¡¹´Â ¡¸ÃÖ¼Ò SCSI ID¡¹, ¡¸b¡¹´Â ¡¸´ÙÀ½ ÃÖ¼Ò SCSI "
-"ID¡¹\n"
-"¿Í °°Àº ½ÄÀ¸·Î Àǹ̸¦ °¡Áý´Ï´Ù.\n"
-"¡¸À©µµ¿ìÁî À̸§¡¹Àº MS À©µµ¿ìÁîÇÏ¿¡¼­ÀÇ À̸§ÀÔ´Ï´Ù.\n"
-"(°¡·É, ù ¹ø° µð½ºÅ© ¶Ç´Â ÆÄƼ¼ÇÀº ¡¸C:¡¹ÀÔ´Ï´Ù.)"
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "±â´Ù·Á ÁÖ¼¼¿ä. ÀÌ ÀÛ¾÷Àº ¸î ºÐÀÇ ½Ã°£ÀÌ °É¸³´Ï´Ù."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"ÀÌÁ¦ ´ÔÀº ±âº»¼³Ä¡(¡¸±ÇÀ塹) ¹æ¹ý°ú º¸´Ù ½ÉµµÀÖ´Â ¼±ÅÃÀ» ÇÒ ¼ö ÀÖ´Â\n"
-"¡¸Àü¹®°¡¡¹¼³Ä¡ ¹æ¹ý Áß Çϳª¸¦ ¼±ÅÃÇÒÁö °áÁ¤ÇØ¾ß¾ß ÇÕ´Ï´Ù. ¶ÇÇÑ »õ·Î¿î ¼³Ä¡"
-"¿Í\n"
-"±âÁ¸ÀÇ ¸®´ª½º ¸Çµå·¹ÀÌÅ© ½Ã½ºÅÛÀÇ ¾÷±×·¹À̵å Áß Çϳª¸¦ ¼±ÅÃÇÒ ¼öµµ ÀÖ½À´Ï"
-"´Ù.\n"
-"ÇöÀç ´ÔÀÇ »óȲ¿¡ ÀûÀýÇÑ °ÍÀ» ¼±ÅÃÇϼ¼¿ä.¡¸¼³Ä¡¡¹¸¦ ¼±ÅÃÇÏ°Ô µÇ¸é\n"
-"±âÁ¸ÀÇ ½Ã½ºÅÛÀ» ¿ÏÀüÈ÷ »èÁ¦ÇÏ°í ´Ù½Ã ¼³Ä¡ÇÏ°Ô µË´Ï´Ù. ¡¸¾÷±×·¹À̵塹¸¦\n"
-"¼±ÅÃÇÏ°Ô µÇ¸é ±âÁ¸ÀÇ ½Ã½ºÅÛÀ» ÃֽŠ½Ã½ºÅÛÀ¸·Î ¾÷±×·¹À̵å ÇÕ´Ï´Ù.\n"
-"\n"
-"¸¸¾à ÀÌÀü ¹öÀüÀÇ ¸®´ª½º ¸Çµå·¹ÀÌÅ©°¡ ¼³Ä¡µÇ¾î ÀÖÁö ¾Ê°Å³ª, \n"
-"¿©·¯ ¿î¿µÃ¼Á¦¸¦ ÇÔ²² »ç¿ëÇÏ°í ½Í´Ù¸é, ¡¸¼³Ä¡¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-"¸¸¾à ÀÌ¹Ì ¼³Ä¡µÈ ÀÌÀü ¹öÀüÀÇ ¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦ ¾÷µ¥ÀÌÆ®ÇÏ·Á¸é,\n"
-" ¡¸¾÷µ¥ÀÌÆ®¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-"´ÔÀÇ GNU/Linux¿¡ ´ëÇÑ Áö½Ä ¼öÁØ¿¡ µû¶ó, ´ÔÀÇ ¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦\n"
-"¼³Ä¡ ¶Ç´Â ¾÷µ¥ÀÌÆ®ÇÏ´Â ´ÙÀ½°ú °°Àº ¹æ¹ýÀ» ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù:\n"
-"\n"
-" ¡Û ±ÇÀå: ¸¸¾à ´ÔÀÌ GNU/Linux¸¦ »ç¿ëÇØ º» °æÇèÀÌ ¾ø´Ù¸é, ÀÌ°ÍÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"¼³Ä¡°úÁ¤Àº ¾ÆÁÖ ½±°í ´ÔÀº ¸î °³ÀÇ Áú¹®¿¡¸¸ ´äÇÏ¸é µË´Ï´Ù.\n"
-"\n"
-" ¡Û Àü¹®°¡: ¸¸¾à ´ÔÀÌ GNU/Linux¿¡ ´ëÇÑ ´ë´ÜÇÑ Áö½ÄÀ» °¡Áö°í ÀÖ´Ù¸é, ÀÌ°ÍÀ» ¼±"
-"ÅÃÇϼ¼¿ä.\n"
-"¡¸»ç¿ëÀÚ Á¤ÀÇ¡¹ ¼³Ä¡Ã³·³ ÁÖ¿ëµµ(¿öÅ©½ºÅ×À̼Ç, ¼­¹ö, °³¹ß)À» ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï"
-"´Ù. \n"
-"ÀÌ°ÍÀ» ¼±ÅÃÇϱ⿡ ¾Õ¼­ ¸Å¿ì ÁÖÀÇÇϼ¼¿ä. ´ÔÀº °íµµÀÇ »ç¿ëÀÚ Á¤ÀÇ ¼³Ä¡¸¦ ¼öÇàÇÏ"
-"°Ô µË´Ï´Ù.\n"
-"GNU/Linux¿¡ ´ëÇؼ­ Àß ¸ð¸¥´Ù¸é, Áú¹®¿¡ ´äÇϱⰡ ¸Å¿ì ¾î·Á¿ï ¼ö ÀÖ½À´Ï´Ù.\n"
-"µû¶ó¼­ È®½ÅÀÌ ¼­Áö ¾Ê´Â´Ù¸é ÀÌ ¼³Ä¡¹æ¹ýÀ» ¼±ÅÃÇÏÁö ¸¶¼¼¿ä."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"ÀϹÝÀûÀ¸·Î, µå·¹ÀÌÅ©X´Â (´ÔÀÌ ¼±ÅÃÇÑ ¾ð¾î¿¡ ±â¹ÝÇÏ¿©) ¿Ã¹Ù¸¥ Å°º¸µå¸¦\n"
-"ÀÚµ¿À¸·Î ¼±ÅÃÇÕ´Ï´Ù. ±×·¯³ª ´ÔÀÌ »ç¿ëÇÏ´Â ¾ð¾î¿¡ Á¤È®È÷ ÀÏÄ¡ÇÏ´Â Å°º¸µå¸¦\n"
-"°¡Áö°í ÀÖÁö ¾Ê´Â °æ¿ìµµ ÀÖÀ» ¼ö ÀÖ½À´Ï´Ù: °¡·É, ¿µ¾î¸¦ »ç¿ëÇÏ´Â ½ºÀ§½ºÀÎÀº\n"
-"¿©ÀüÈ÷ ½ºÀ§½º Å°º¸µå¸¦ ¿øÇÒ ¼öµµ ÀÖ½À´Ï´Ù. ¶ÇÇÑ ¿µ¾î¸¦ »ç¿ëÇÏÁö¸¸, ij³ª´Ù Äù"
-"º¤ÁÖ¿¡\n"
-"»ì°í ÀÖ´Ù¸é ¶ÇÇÑ ÀÌ·¯ÇÑ °æ¿ì°¡ µÉ °ÍÀÔ´Ï´Ù. ÀÌ·±·ùÀÇ °æ¿ì¶ó¸é, ÀÌ ´Ü°è¿¡¼­\n"
-"Àû´çÇÑ Å°º¸µå¸¦ ¸ñ·Ï¿¡¼­ ¼±ÅÃÇØ¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"Áö¿øµÇ´Â ¸ðµç Å°º¸µå ¸ñ·ÏÀ» º¸·Á¸é, ¡¸Ãß°¡Á¤º¸¡¹¸¦\n"
-"´©¸£¼¼¿ä."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"¼³Ä¡½Ã ±×¸®°í ½Ã½ºÅÛ¿ëÀ¸·Î »ç¿ëÇÒ ¾ð¾î¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"¡¸°í±Þ¡¹À» ´©¸£¸é, ´Ù¸¥ ¾ð¾îµµ Ãß°¡·Î ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"´Ù¸¥ ¾ð¾îµµ ¼±ÅÃÇÏ°Ô µÇ¸é, ±× ¾ð¾î¿Í °ü·ÃµÈ ½Ã½ºÅÛ ¹®¼­ ¹× ÇÁ·Î±×·¥ ÆÄÀϵé"
-"µµ\n"
-"¼³Ä¡ÇÏ°Ô µË´Ï´Ù. °¡·É, ´ÔÀÇ ½Ã½ºÅÛÀ» ÀϺ»Àεµ »ç¿ëÇÒ ¼ö ÀÖµµ·Ï ÇÏ°í ½Í´Ù¸é,\n"
-"¸ñ·Ï¿¡¼­ ÁÖ ¾ð¾î·Î ¡¸Çѱ¹¾î¡¹¸¦ ¼±ÅÃÇÏ°í, ¡¸°í±Þ¡¹¿¡¼­ ¡¸ÀϺ»¾î¡¹¿¡ ÇØ´çÇÏ"
-"´Â\n"
-"ȸ»ö º°Ç¥¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"¿©·¯°³ÀÇ Ãß°¡ ¾ð¾î¸¦ ¼±ÅÃÇÒ ¼öµµ ÀÖ½À´Ï´Ù. ¾ð¾î ¼±ÅÃÀ» ³¡¸¶ÃÆÀ¸¸é,\n"
-"¡¸È®ÀΡ¹À» ´­·¯¼­ °è¼Ó ÁøÇàÇϼ¼¿ä."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"±âº»ÀûÀ¸·Î µå·¹ÀÌÅ©X´Â ´ÔÀÌ 2¹öÆ° ¸¶¿ì½º¸¦ »ç¿ëÇÑ´Ù°í °¡Á¤ÇÒ °ÍÀ̸ç,\n"
-"¼¼ ¹ø° ¹öÆ°Àº ¿¡¹Ä·¹À̼ÇÇÒ °ÍÀÔ´Ï´Ù. ¸¶¿ì½º°¡ PS/2, ½Ã¸®¾ó, ȤÀº USB¿ëÀÎÁö"
-"´Â\n"
-"µå·¹ÀÌÅ©X°¡ ÀÚµ¿À¸·Î ¾Ë¾Æ³¾ ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"¸¸¾à ´Ù¸¥ ¸¶¿ì½º À¯ÇüÀ» ÁöÁ¤ÇÏ°í ½Í´Ù¸é, Á¦°øµÇ´Â ¸ñ·Ï¿¡¼­ Àû´çÇÑ °ÍÀ»\n"
-"¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"¸¸¾à ´Ù¸¥ ¸¶¿ì½º¸¦  ¼±ÅÃÇÏ°Ô µÇ¸é, ¸¶¿ì½º Å×½ºÆ® È­¸éÀ» º¸°ÔµÉ °ÍÀÔ´Ï´Ù.\n"
-"±×·¯¸é, ¸¶¿ì½º ¹öÆ°°ú ÈÙÀ» Á¶ÀÛÇÏ¿© ¼³Á¤ÀÌ Á¤È®ÇÏ°Ô µÇ¾ú´ÂÁö È®ÀÎÇϼ¼¿ä.\n"
-"¸¸¾à Á¦´ë·Î ÀÛµ¿Çϱ⠾ÊÀ¸¸é,¡¸Ãë¼Ò¡¹¹öÆ° À§¿¡¼­ ½ºÆäÀ̽º Å°³ª ¿£ÅÍ Å°¸¦\n"
-"´©¸£°í ´Ù½Ã ¼±ÅÃÇϽñ⠹ٶø´Ï´Ù."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Á¤È®ÇÑ Æ÷Æ®¸¦ ¼±ÅÃÇϼ¼¿ä. ¿¹¸¦ µé¾î, MS À©µµ¿ìÁî¿¡¼­ COM1Àº\n"
-"¸®´ª½º¿¡¼­´Â ttyS0·Î ¸í¸íµË´Ï´Ù."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO(¸®´ª½º ·Î´õ)¿Í GRUBÀº ºÎÆ® ·Î´õÀÔ´Ï´Ù: À̰͵éÀº ½Ã½ºÅÛ»óÀÇ\n"
-"GBU/¸®´ª½º ¶Ç´Â ´Ù¸¥ ¿î¿µÃ¼Á¦¸¦ ºÎÆýÃÅ°´Âµ¥ »ç¿ëµË´Ï´Ù.\n"
-"ÀϹÝÀûÀ¸·Î, ¸®´ª½º°¡ ¾Æ´Ñ ´Ù¸¥ ¿î¿µÃ¼Á¦µµ ÀÚµ¿À¸·Î °¨ÁöµÇ¾î\n"
-"¼³Á¤µË´Ï´Ù. ±×·¯³ª ¸¸¾à ±×·¸Áö ¸øÇÑ °æ¿ì, ¿©±â¼­ Á÷Á¢ Ç׸ñÀ»\n"
-"Ãß°¡ÇÒ ¼ö ÀÖ½À´Ï´Ù. Á¤È®ÇÑ ÀÎÀÚ°ªÀ» ¼±ÅÃÇϵµ·Ï ÁÖÀÇÇϼ¼¿ä.\n"
-"\n"
-"¶ÇÇÑ ´Ù¸¥ »ç¶÷ÀÌ Æ¯Á¤ ¿î¿µÃ¼Á¦¸¦ ºÎÆÃÇÏ´Â °ÍÀ» ¸·°í ½ÍÀ» ¼öµµ\n"
-"ÀÖÀ» °ÍÀÔ´Ï´Ù. ±×·± °æ¿ì, ÇØ´ç Ç׸ñÀ» Áö¿ì¼¼¿ä. ±×·¯³ª ±×·¸°ÔÇϸé,\n"
-"±× ¿î¿µÃ¼Á¦¸¦ ºÎÆÃÇϱâ À§Çؼ­´Â ºÎÆà µð½ºÅ©°¡ ÀÖ¾î¾ß ÇÕ´Ï´Ù!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/¸®´ª½º¸¦ ºÎÆÃÇϴµ¥ ÇÊ¿äÇÑ Á¤º¸¸¦  ¾îµð¿¡ À§Ä¡½Ãų °ÍÀÎÁö\n"
-"ÁöÁ¤ÇØ ÁÖ¼¼¿ä.\n"
-"\n"
-"Áö±Ý ¹«¾ùÀ» ¹¯°í ÀÖ´ÂÁö Á¶Â÷ ¸ð¸£°Ú´Ù¸é,\n"
-"¡¸µð½ºÅ©ÀÇ Ã¹ ¼½ÅÍ(MBR)¡¹¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"µå·¹ÀÌÅ©X°¡ ½Ã½ºÅÛ»ó¿¡ ÀÖ´Â ¸ðµç ÇÏµå µð½ºÅ©¸¦ °Ë»öÇÏ°í\n"
-"¶ÇÇÑ PCI SCSI ¾î´ðÅÍ Å½Áö¸¦ ½ÃµµÇÒ °ÍÀÔ´Ï´Ù.\n"
-"¸¸¾à µå·¹ÀÌÅ©X°¡ ÀåÄ¡¸¦ ¹ß°ßÇÏ°Ô µÇ¸é ÀÚµ¿À¸·Î\n"
-"¿Ã¹Ù¸¥ µå¶óÀ̹ö¸¦ ¼³Ä¡ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"µå·¹ÀÌÅ©XÀÇ ÀåÄ¡ °Ë»öÀÌ ½ÇÆÐÇÏ´õ¶óµµ, ´Ô²² SCSI ÀåÄ¡ÀÇ À¯¹«¸¦ Áú¹®ÇÏ°Ô µË´Ï"
-"´Ù.\n"
-"¸ñ·Ï¿¡¼­ ÀåÄ¡¸¦ Á÷Á¢ ¼±ÅÃÇÏ·Á¸é ¡¸¿¹¡¹¸¦, SCSI ÀåÄ¡°¡ ¾ø´Ù¸é ¡¸¾Æ´Ï¿À¡¹¸¦ ¼±"
-"ÅÃÇϼ¼¿ä.\n"
-"Àß ¸ð¸£°Ú´Ù¸é, ¡¸Çϵå¿þ¾î Á¤º¸ º¸±â¡¹¸¦ ¼±ÅÃÇÑ ÈÄ ¡¸È®ÀΡ¹À» ´­·¯¼­\n"
-"½Ã½ºÅÛ»ó¿¡ Á¸ÀçÇÏ´Â Çϵå¿þ¾îµéÀ» »ìÆ캼 ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"Çϵå¿þ¾î¿¡ ´ëÇÑ °ËÅä°¡ ³¡³ª¸é ´Ù½Ã ¡¸È®ÀΡ¹¹öÆ°À» ´­·¯¼­ SCSI ÀÎÅÍÆäÀ̽º Áú"
-"¹® È­¸é\n"
-"À¸·Î µ¹¾Æ ¿Ã ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"Á÷Á¢ ¾î´ðÅ͸¦ ÁöÁ¤ÇØ¾ß ÇÒ ¶§¿¡´Â, µå·¹ÀÌÅ©X°¡ ¿É¼ÇÀ» ÁöÁ¤ÇÒ °ÍÀÎÁö¸¦ ¹°¾î\n"
-"º¼ °ÍÀÔ´Ï´Ù. ÀÌ ¶§´Â µå·¹ÀÌÅ©X°¡ ÇÊ¿äÇÑ ¿É¼ÇÀ» ŽÁöÇϵµ·Ï ÇÏ´Â °ÍÀÌ ÁÁ½À´Ï"
-"´Ù.\n"
-"ÀϹÝÀûÀ¸·Î ÀÌ ¹æ¹ýÀº Àß ÀÛµ¿ÇÕ´Ï´Ù.\n"
-"\n"
-"\n"
-"¸¸¾à ±×·¸Áö ¾Ê´Ù¸é, Á÷Á¢ µå¶óÀ̹ö ¿É¼ÇÀ» ÁöÁ¤ÇØ¾ß ÇÕ´Ï´Ù. »ç¿ëÀÚ ¼³¸í¼­(3"
-"Àå, \n"
-"¡¸Çϵå¿þ¾î¿¡ ´ëÇÑ Á¾ÇÕÁ¤º¸¡¹»ö¼Ç)¸¦ ÂüÁ¶ÇÏ¿©, Çϵå¿þ¾î ¼³¸í¼­, \n"
-"(ÀÎÅͳݿ¡ ¿¬°áÇÒ ¼ö ÀÖ´Ù¸é) Á¦Á¶¾÷ü À¥ »çÀÌÆ®, \n"
-"¶Ç´Â (À©µµ¿ìÁî°¡ ¼³Ä¡µÇ¾î ÀÖ´Ù¸é) MS À©µµ¿ìÁî¿¡¼­ ¾î¶»°Ô ¿©±â¿¡ ÇÊ¿äÇÑ \n"
-"Á¤º¸¸¦ ¾Ë¾Æ ³¾ ¼ö ÀÖ´ÂÁö ã¾Æ º¸¼¼¿ä."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-#, fuzzy
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"´ÔÀÇ ½Ã½ºÅÛ¿¡ °üÇÑ ´Ù¾çÇÑ ÀÎÀÚµéÀ» º¸ÀÌ°í ÀÖ½À´Ï´Ù. ¼³Ä¡µÈ Çϵå¿þ¿¡ µû¶ó\n"
-"¾Æ·¡¿¡ ¼³¸íµÇ´Â Ç׸ñµé Áß ÀϺδ º¸ÀÌÁö ¾ÊÀ» ¼ö ÀÖ½À´Ï´Ù:\n"
-"\n"
-"  ¡Û ¡¸¸¶¿ì½º¡¹: ÇöÀç ¸¶¿ì½º ¼³Á¤À» È®ÀÎÇÏ°í, ÇÊ¿äÇÏ´Ù¸é Ŭ¸¯ÇÏ¿©\n"
-"¸¶¿ì½º¸¦ º¯°æÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸Å°º¸µå¡¹: ÇöÀç Å°º¸µå ¸ÊÀ» È®ÀÎÇÏ°í, ÇÊ¿äÇÏ´Ù¸é Ŭ¸¯ÇÏ¿©\n"
-"Å°º¸µå¸¦ º¯°æÇϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸Áö¿ª½Ã°£´ë¡¹: µå·¹ÀÌÅ©X´Â ´ÔÀÌ ¼±ÅÃÇÑ ¾ð¾î¿¡ µû¶ó ÀÚµ¿À¸·Î\n"
-"Áö¿ª½Ã°£´ë¸¦ ¼±ÅÃÇÕ´Ï´Ù. ±×·¯³ª, Å°º¸µåµµ ±×·¯ÇÏÁö¸¸, ´ÔÀº ÇöÀç ¼±ÅõÈ\n"
-"¾ð¾î¿Í ÀÏÄ¡ÇÏ´Â ±¹°¡¿¡ °ÅÁÖÇÏ°í ÀÖÁö ¾ÊÀ» ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"±×·¯ÇÏ´Ù¸é, ¡¸Áö¿ª½Ã°£´ë¡¹¸¦ Ŭ¸¯ÇÏ¿©, ´ÔÀÌ ÇöÀç °ÅÁÖÇÏ°í ÀÖ´Â\n"
-"Áö¿ªÀÇ ½Ã°£´ë¿¡ ¸Â°Ô ½Ã°£À» ¼³Á¤Çϼ¼¿ä.\n"
-"\n"
-"  ¡Û ¡¸ÇÁ¸°ÅÍ¡¹: ¡¸ÇÁ¸°ÅÍ ¾øÀ½¡¹À» ´©¸£¸é, ÇÁ¸°ÅÍ ¼³Á¤ ¸¶¹ý»ç°¡\n"
-"½ÃÀÛµÉ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸»ç¿îµå Ä«µå¡¹: ¸¸¾à »ç¿îµå Ä«µå°¡ °¨ÁöµÇ¾ú´Ù¸é, ¿©±â¿¡ ³ªÅ¸³¯\n"
-"°ÍÀÔ´Ï´Ù. ¼³Ä¡ Áß¿¡ º¯°æÇÏ´Â °ÍÀº ºÒ°¡´ÉÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸TV Ä«µå¡¹: ¸¸¾à TV Ä«µå°¡ °¨ÁöµÇ¾ú´Ù¸é, ¿©±â¿¡ ³ªÅ¸³¯ °ÍÀÔ´Ï´Ù.\n"
-"¼³Ä¡ Áß¿¡ º¯°æÇÏ´Â °ÍÀº ºÒ°¡´ÉÇÕ´Ï´Ù.\n"
-"\n"
-"  ¡Û ¡¸ISDN Ä«µå¡¹: ¸¸¾à ISDN Ä«µå°¡ °¨ÁöµÇ¾ú´Ù¸é, ¿©±â¿¡ ³ªÅ¸³¯\n"
-"°ÍÀÔ´Ï´Ù. ¹öÆ°À» Ŭ¸¯ÇÏ¿© °ü·Ã ÀÎÀÚÀ» º¯°æÇÒ ¼öµµ\n"
-"ÀÖ½À´Ï´Ù."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"¸Çµå·¹ÀÌÅ© ¸®´ª½º ÆÄƼ¼ÇÀ» ¸¸µé±â À§Çؼ­ »èÁ¦ÇÒ Çϵåµð½ºÅ¬¸£ ¼±ÅÃÇϼ¼¿ä.\n"
-"ÁÖÀÇ:\n"
-"µð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ´Â ¼Õ½ÇµÇ¸ç, ¿µ¿øÈ÷ º¹±¸°¡ ºÒ°¡´ÉÇØ Áý´Ï´Ù!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ÀÌ Çϵåµð½ºÅ©»óÀÇ ¸ðµç µ¥ÀÌÅÍ¿Í ÆÄƼ¼ÇÀ» »èÁ¦ÇÏ·Á¸é, ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"!!ÁÖÀÇÇϼ¼¿ä!!ÀÏ´Ü ¡¸È®ÀΡ¹À» ´©¸£°Ô µÇ¸é, MS À©µµ¿ìÁî µ¥ÀÌÅи£ Æ÷ÇÔÇÏ¿© ÀÌ "
-"µð½ºÆ®»óÀÇ ¸ðµç\n"
-"µ¥ÀÌÅÍ¿Í ÆÄƼ¼ÇÀº º¹±¸°¡ ºÒ°¡´ÉÇØ Áý´Ï´Ù.\n"
-"\n"
-"ÀÌ ÀÛ¾÷À» Ãë¼ÒÇÏ·Á¸é, Áö±Ý ¡¸Ãë¼Ò¡¹¸¦ ´©¸£¼¼¿ä. ¾î¶°ÇÑ µ¥ÀÌÅÍ¿Í ÆÄƼ¼Çµµ\n"
-"¼Õ»óµÇÁö ¾ÊÀ» °ÍÀÔ´Ï´Ù."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"´ÙÀ½°ú °°Àº ¼­¹öµéÀÌ ¼±ÅõǾú½À´Ï´Ù: %s\n"
-"\n"
-"\n"
-"ÀÌ ¼­¹öµéÀº ±âº»ÀûÀ¸·Î È°¼ºÈ­µË´Ï´Ù. ºñ·Ï ¾ÆÁ÷±îÁö ¾Ë·ÁÁø º¸¾È ¹®Á¦´Â ¾øÁö"
-"¸¸,\n"
-"»õ·Î¿î ¹®Á¦Á¡ÀÌ ¹ß°ßµÉ ¼öµµ ÀÖ½À´Ï´Ù. ±×·² °æ¿ì¿¡´Â °¡´ÉÇÑ ÇÑ ½Å¼ÓÇÏ°Ô\n"
-"¾÷±×·¹À̵åÇØ¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"\n"
-"Á¤¸»·Î ÀÌ ¼­¹öµéÀ» ¼³Ä¡Çմϱî?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS µµ¸ÞÀÎ ¾øÀÌ´Â ºê·ÎµåÄɽºÆ®¸¦ »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ç÷ÎÇÇ µð½ºÅ©¸¦ %s µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "ÀÌ Ç÷ÎÇÇ µð½ºÅ©´Â FAT Æ÷¸ËÀÌ ¾Æ´Õ´Ï´Ù."
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"ÀÌ ÀúÀåµÈ ÆÑÅ°Áö ¼±Åøñ·ÏÀ» »ç¿ëÇÒ·Á¸é, ``linux defcfg=floppy''¶ó°í ÀÔ·ÂÇÏ¿© "
-"¼³Ä¡À» ½ÃÀÛÇϼ¼¿ä."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s ÆÄÀÏÀ» ÀдÂÁß ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¡¸»ó¾÷¿ë¡¹µå¶óÀ̹ö¸¦ ÇÊ¿ä·ÎÇÏ´Â ÀϺΠÇϵå¿þ¾î°¡ ½Ã½ºÅÛ»ó¿¡ ÀÖ½À´Ï´Ù.\n"
-"ÀÚ¼¼ÇÑ Á¤º¸´Â ´ÙÀ½À» ÂüÁ¶Çϼ¼¿ä: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"·çÆ® ÆÄƼ¼ÇÀÌ ¹Ýµå½Ã ÇÊ¿äÇÕ´Ï´Ù.\n"
-"À̸¦ À§Çؼ­, ÆÄƼ¼ÇÀ» »ý¼ºÇϼ¼¿ä. (ÀÌ¹Ì ÀÖ´Â ÆÄƼ¼ÇÀ» Ŭ¸¯Çϰųª).\n"
-"±×¸®°í ³ª¼­, ``¸¶¿îÆ® À§Ä¡''¸¦ Ŭ¸¯ÇÑÈÄ '/'À¸·Î ¼³Á¤Çϼ¼¿ä."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "½º¿Ò ÆÄƼ¼ÇÀº ¹Ýµå½Ã ÇÊ¿äÇÕ´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"½º¿Ò ÆÄƼ¼ÇÀÌ ¾ø½À´Ï´Ù.\n"
-"\n"
-"°è¼Ó ÁøÇàÇմϱî?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "¡¸/boot/efi¡¹¿¡ ¸¶¿îÆ®µÈ FAT ÆÄƼ¼ÇÀÌ ÀÖ¾î¾ß¸¸ ÇÕ´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "ºó °ø°£ »ç¿ë"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "»õ·Î¿î ÆÄƼ¼ÇÀ» ¸¸µé ¼ö ÀÖ´Â °ø°£ÀÌ ºÎÁ·ÇÕ´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "±âÁ¸ÀÇ ÆÄƼ¼Ç »ç¿ë"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "»ç¿ëÇÒ ±âÁ¸ÀÇ ÆÄƼ¼ÇÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "À©µµ¿ìÁî ÆÄƼ¼ÇÀ» ·çÇÁ¹éÀ¸·Î »ç¿ë"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¾î´À ÆÄƼ¼ÇÀ» Linux4Win¿ëÀ¸·Î »ç¿ëÇÏ°Ú½À´Ï±î?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Å©±â ¼±ÅÃ"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "·çÆ® ÆÄƼ¼Ç Å©±â(MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "½º¿Ò ÆÄƼ¼Ç Å©±â(MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ ºó °ø°£ »ç¿ëÇϼ¼¿ä."
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "¾î¶² ÆÄƼ¼ÇÀÇ Å©±â¸¦ Á¶Á¤ÇϽðڽÀ´Ï±î?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "À©µµ¿ìÁî ÆÄÀÏ ½Ã½ºÅÛÀÇ ¹üÀ§ °è»êÁß"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT Å©±â Á¶Á¤±â°¡ ´ÔÀÇ ÆÄƼ¼ÇÀ» ó¸®ÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"´ÙÀ½ÀÇ ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"À©µµ¿ìÁî ÆÄƼ¼ÇÀÌ ½ÉÇÏ°Ô Á¶°¢³ª ÀÖ½À´Ï´Ù. ¸ÕÀú ``µð½ºÅ© Á¶°¢ ¸ðÀ½''À» Çϼ¼¿ä."
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"°æ°í!\n"
-"\n"
-"µå·¹ÀÌÅ©X°¡ ÀÌÁ¦ À©µµ¿ìÁî ÆÄƼ¼ÇÀÇ Å©±â¸¦ Á¶Á¤ÇÒ °ÍÀÔ´Ï´Ù. ÀÌ ÀÛµ¿Àº \n"
-"À§ÇèÇÕ´Ï´Ù. ¾ÆÁ÷ ½ÃÀÛÇÏÁö ¾Ê¾Ò´Ù¸é, ¼³Ä¡¸¦ Áß´ÜÇÏ°í À©µµ¿ìÁî¿¡¼­\n"
-"µð½ºÅ©°Ë»ç¡¹(°¡´ÉÇÏ´Ù¸é ¶ÇÇÑ ¡¸µð½ºÅ© Á¶°¢¸ðÀ½¡¹)¸¦ ½ÇÇàÇÑ ÈÄ¿¡,\n"
-"¼³Ä¡¸¦ ´Ù½Ã ½ÃÀÛÇϼ¼¿ä. ¶ÇÇÑ µ¥ÀÌÅ͵µ ¹é¾÷ÇØ µÎ¼¼¿ä.\n"
-"ÁغñµÆÀ¸¸é, ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "À©µµ¿ìÁî¿ëÀ¸·Î ¾î´À ¿ë·®À» À¯ÁöÇϽðڽÀ´Ï±î?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "ÆÄƼ¼Ç %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FATÅ©±âÁ¶Á¤ ½ÇÆÐ: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"loopback·Î »ç¿ëÇϰųª Å©±â¸¦ Á¶Á¤ÇÒ FAT ÆÄƼ¼ÇÀÌ ¾ø½À´Ï´Ù. (¶Ç´Â µð½ºÅ© °ø°£"
-"ÀÌ ºÎÁ·ÇÕ´Ï´Ù.)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Àüü µð½ºÅ© »èÁ¦"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "À©µµ¿ìÁî(TM) Á¦°Å"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"ÇÏµå µå¶óÀ̺갡 Çϳª ÀÌ»ó ÀÖ½À´Ï´Ù. ¾î´À °Í¿¡ ¸®´ª½º¸¦ ¼³Ä¡ÇϽðڽÀ´Ï±î?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s µå¶óÀÌºê »óÀÇ ¸ðµç ±âÁ¸ ÆÄƼ¼Ç°ú µ¥ÀÌÅÍ°¡ ¼Õ½ÇµÉ °ÍÀÔ´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "»ç¿ëÀÚ Á¤ÀÇ ÆÄƼ¼Ç ³ª´©±â"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "fdisk »ç¿ë"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ÀÌÁ¦ %sÀÇ ÆÄƼ¼Ç ÀÛ¾÷À» ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"¸¶Ä£ ÈÄ, 'w'¸¦ ´­·¯ ÀúÀåÇϴ°ÍÀ» ÀØÁö¸¶¼¼¿ä."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "À©µµ¿ìÁî ÆÄƼ¼Ç¿¡ ÃæºÐÇÑ °ø°£ÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "¼³Ä¡¿¡ ÇÊ¿äÇÑ °ø°£À» ãÀ» ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "µå·¹ÀÌÅ©X ÆÄƼ¼Ç ¸¶¹ý»ç°¡ ´ÙÀ½ÀÇ ¼Ö·ç¼ÇÀ» ¹ß°ßÇß½À´Ï´Ù:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "ÆÄƼ¼Ç ³ª´©±â ½ÇÆÐ: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "³×Æ®¿÷ È°¼ºÈ­ Áß..."
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "³×Æ®¿÷ ÇØÁ¦ Áß..."
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù. ±×·¯³ª ÀûÀýÈ÷ ó¸®ÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"À§ÇëÀ» °¨¼öÇÒ·Á¸é °è¼ÓÇϼ¼¿ä."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "¸¶¿îÆ® Æ÷ÀÎÆ® Áߺ¹ %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"ÀϺΠÁß¿äÇÑ ÆÑÅ°ÁöµéÀÌ ¿Ã¹Ù¸£°Ô ¼³Ä¡µÇÁö ¾Ê¾Ò½À´Ï´Ù.\n"
-"CDROM µå¶óÀÌºê ¶Ç´Â ¹Ìµð¾î°¡ ¼Õ»óµÇ¾ú½À´Ï´Ù.\n"
-"ÀÌ¹Ì ¼³Ä¡°¡ ¿Ï·áµÈ ÄÄÇ»ÅÍ¿¡¼­ ¡¸rpm -qpl Mandrake/RPMS/*.rpm¡¹¸í·ÉÀ¸·Î Á¡°Ë"
-"ÇØ º¸¼¼¿ä.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s¿¡ ¿À½Å°ÍÀ» ȯ¿µÇÕ´Ï´Ù."
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ç÷ÎÇÇ µå¶óÀ̺긦 »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "%s ´Ü°è·Î ³Ñ¾î°©´Ï´Ù.\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"½Ã½ºÅÛÀÇ ÀÚ¿øÀÌ ºÎÁ·ÇÕ´Ï´Ù. ¸®´ª½º ¸Çµå·¹ÀÌÅ©¸¦ ¼³Ä¡Çϴµ¥ ÀϺΠ¹®Á¦°¡ ¹ß»ý"
-"ÇÒ\n"
-"¼öµµ ÀÖ½À´Ï´Ù. ¸¸¾à ¹®Á¦°¡ ¹ß»ýÇϸé, ÅýºÆ® ¸ðµå·Î ¼³Ä¡¸¦ ½ÃµµÇØ º¸¼¼¿ä.\n"
-"ÅؽºÆ® ¸ðµå·Î ¼³Ä¡ÇÏ·Á¸é, CDROMÀ¸·Î ºÎÆÃÈÄ ¡¸F1¡¹À» ´©¸£°í ¡¸text¡¹¶ó°í ÀÔ·Â"
-"Çϼ¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "¼³Ä¡ À¯Çü"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "´ÙÀ½ ¼³Ä¡ À¯ÇüÁß Çϳª¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "¼±ÅÃÇÑ ÆÑÅ°Áö ±×·ìÀÇ Àüü Å©±â°¡ %d MB¿¡ °¡±õ½À´Ï´Ù.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ÀÌ ¿ë·®º¸´Ù Àû°Ô ¼³Ä¡ÇÏ°í ½Í´Ù¸é,\n"
-"¼³Ä¡ÇÏ°íÀÚ ÇÏ´Â ÆÑÅ°ÁöµéÀÇ ¹éºÐÀ²À» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-"¹éºÐÀ²ÀÌ ³·À¸¸é, °¡Àå Áß¿äÇÑ ÆÑÅ°Áöµé¸¸ ¼³Ä¡µË´Ï´Ù;\n"
-"¹éºÐÀ² 100%%´Â ¼±ÅÃµÈ ¸ðµç ÆÑÅ°ÁöµéÀ» ¼³Ä¡ÇÕ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¼±ÅÃµÈ ÆÑÅ°ÁöµéÀÇ %d%%¿¡ ÇØ´çÇÏ´Â µð½ºÅ© °ø°£¸¸ ³²¾Æ ÀÖ½À´Ï´Ù.\n"
-"\n"
-"ÀÌ ¿ë·®º¸´Ù Àû°Ô ¼³Ä¡ÇÏ°í ½Í´Ù¸é,\n"
-"¼³Ä¡ÇÏ°íÀÚ ÇÏ´Â ÆÑÅ°ÁöµéÀÇ ¹éºÐÀ²À» ¼±ÅÃÇϼ¼¿ä.\n"
-"¹éºÐÀ²ÀÌ ³·À¸¸é, °¡Àå Áß¿äÇÑ ÆÑÅ°Áöµé¸¸ ¼³Ä¡µË´Ï´Ù;\n"
-"¹éºÐÀ² %d%%´Â °¡´ÉÇÑ ¸ðµç ÆÑÅ°ÁöµéÀ» ¼³Ä¡ÇÕ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "´ÙÀ½ ´Ü°è¿¡¼­ Ãß°¡·Î ÀÚ¼¼È÷ ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°ÁöÀÇ ¹éºÐÀ²"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "ÆÑÅ°Áö ±×·ì ¼±ÅÃ"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "°³º° ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Àüü Å©±â: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "À߸øµÈ ÆÑÅ°Áö"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "À̸§: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "¹öÁ¯: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Å©±â: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Á߿伺: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "µð½ºÅ© °ø°£ÀÌ ºÎÁ·Çϱ⠶§¹®¿¡ ÀÌ ÆÑÅ°Áö¸¦ ¼±ÅÃÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "´ÙÀ½ ÆÑÅ°ÁöµéÀÌ ¼³Ä¡µÉ °ÍÀÔ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "´ÙÀ½ ÆÑÅ°ÁöµéÀÌ Á¦°ÅµÉ °ÍÀÔ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "ÀÌ ÆÑÅ°Áö¸¦ ¼±ÅÃ/¹ö¸² ÇÒ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "ÀÌ°ÍÀº ÇʼöÀûÀÎ ÆÑÅ°ÁöÀÔ´Ï´Ù. ¹Ýµå½Ã ¼±ÅõǾî¾ß ÇÕ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "ÀÌ ÆÑÅ°Áö¸¦ ¼±ÅÃÇØÁ¦ÇÒ ¼ö ¾ø½À´Ï´Ù. ÀÌ¹Ì ¼³Ä¡ µÇ¾ú½À´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"ÀÌ ÆÑÅ°Áö´Â ¹Ýµå½Ã ¾÷±×·¹À̵åµÇ¾î¾ß ÇÕ´Ï´Ù.\n"
-"Á¤¸»·Î ¼±ÅÃÀ» ÇØÁ¦ÇϽðڽÀ´Ï±î?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "ÀÌ ÆÑÅ°Áö¸¦ ¼±ÅÃÇØÁ¦ÇÒ¼ö ¾ø½À´Ï´Ù. ¹Ýµå½Ã ¾÷±×·¹À̵åµÇ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "ÀÚµ¿À¸·Î ¼±ÅÃµÈ ÆÑÅ°Áöµé º¸À̱â"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "¼³Ä¡"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Ç÷ÎÇÇ¿¡ ÀúÀå/ÀûÀç"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "¼±ÅÃµÈ ÆÑÅ°Áö ¸ñ·Ï ¾÷µ¥ÀÌÆ® Áß"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "ÃÖ¼Ò ¼³Ä¡"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "¼³Ä¡ÇÏ°íÀÚ ÇÏ´Â ÆÑÅ°Áö¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "¼³Ä¡Áß"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "°è»ê Áß"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "³²Àº ½Ã°£ "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "¼³Ä¡ ÁغñÁßÀÔ´Ï´Ù. Àá½Ã ±â´Ù¸®¼¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ÆÑÅ°Áö"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s ÆÑÅ°Áö ¼³Ä¡Áß"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "µ¿ÀÇ"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "°ÅºÎ"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"CDROMÀ» ¹Ù²ã ÁÖ¼¼¿ä!\n"
-"\n"
-"¡¸%s¡¹¶ó°í ¾²¿©Áø CDROMÀ» µå¶óÀ̺꿡 ³ÖÀº ÈÄ, ¡¸È®ÀΡ¹À» ´­·¯ ÁÖ¼¼¿ä.\n"
-"¸¸¾à CDROMÀ» °¡Áö°í ÀÖÁö ¾Ê´Ù¸é, ¡¸Ãë¼Ò¡¹¸¦ ´­·¯ Ãß°¡ ¼³Ä¡¸¦ Ãë¼ÒÇϼ¼¿ä."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "°è¼Ó ÁøÇàÇմϱî?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "ÆÑÅ°Áö¸¦ Á¤·ÄÇÏ´Â Áß ¿À·ù¹ß»ý:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "´ÙÀ½ ÆÑÅ°Áö¸¦ ¼³Ä¡Áß ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù: "
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "¿À·ù ¹ß»ý"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Á¤¸»·Î ¡¸%s¡¹ÇÁ¸°Å͸¦ Á¦°ÅÇմϱî?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "»ç¿ë µ¿ÀǼ­"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Å°º¸µå"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Å°º¸µå ·¹À̾ƿô ¼±ÅÃ"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Áö¿øµÇ´Â Å°º¸µå ¸ñ·ÏÀÌ ¿©±â¿¡ ÀÖ½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "¼³Ä¡ À¯ÇüÀ» ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "¼³Ä¡/¾÷µ¥ÀÌÆ®"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "¼³Ä¡ÇÕ´Ï±î ¾Æ´Ï¸é ¾÷µ¥ÀÌÆ® Çմϱî?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "±ÇÀå"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Àü¹®°¡"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "¾÷µ¥ÀÌÆ®"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "¼±ÅÃµÈ ÆÑÅ°Áö ¸ñ·Ï ¾÷µ¥ÀÌÆ® Áß"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "¾î¶² Á¾·ùÀÇ ¸¶¿ì½º¸¦ »ç¿ëÇϽʴϱî?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "¸¶¿ì½º Æ÷Æ®"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "¾î¶² ½Ã¸®¾ó Æ÷Æ®¿¡ ¸¶¿ì½º°¡ ¿¬°áµÇ¾î ÀÖ³ª¿ä?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "¹öÆ° ¿¡¹Ä·¹À̼Ç"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "¹öÆ° 2 ¿¡¹Ä·¹À̼Ç"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "¹öÆ° 3 ¿¡¹Ä·¹À̼Ç"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIS Ä«µå ȯ°æ¼³Á¤Áß..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE ¼³Á¤Áß"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "»ç¿ë°¡´ÉÇÑ ÆÄƼ¼ÇÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "¸¶¿îÆ® À§Ä¡¸¦ ã±âÀ§ÇØ ÆÄƼ¼ÇµéÀ» °Ë»ö Áß"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "¸¶¿îÆ® À§Ä¡¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"ÇÏµå µð½ºÅ©ÀÇ ÆÄƼ¼Ç Å×À̺íÀ» ÀÐÀ»¼ö ¾ø½À´Ï´Ù. ³Ê¹« ¼Õ»óµÇ¾î ÀÖ½À´Ï´Ù:(\n"
-"¹®Á¦ÀÖ´Â ÆÄƼ¼ÇÀ» ºñ¿ì±âÀ§ÇÑ ½Ãµµ¸¦ ÇÒ ¼ö ÀÖ½À´Ï´Ù.(¸ðµç µ¥ÀÌÅÍ°¡ ¼Õ½ÇµË´Ï"
-"´Ù!)\n"
-"´Ù¸¥ ÇØ°áÃ¥Àº DrakX°¡ ÆÄƼ¼Ç Å×À̺íÀ» º¯°æÇÏÁö ¸øÇÏ°Ô ÇÏ´Â °ÍÀÔ´Ï´Ù.\n"
-"(¿À·ù´Â %s ÀÔ´Ï´Ù.)\n"
-"\n"
-"ÆÄƼ¼ÇµéÀ» ÀҾ ÁÁ½À´Ï±î?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"µð½ºÅ©µå·¹Å©°¡ ÆÄƼ¼Ç Å×À̺íÀ» Á¤È®È÷ Àоî¿À´Âµ¥ ½ÇÆÐÇß½À´Ï´Ù.\n"
-"À§ÇèÀ» °¨¼öÇÒ Áغñ°¡ µÈ °æ¿ì¿¡¸¸ °è¼ÓÇϼ¼¿ä!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"1MB ºÎÆ®½ºÆ®·¦ °ø°£ ºÎÁ·! ¼³Ä¡´Â °è¼ÓÇÒ ¼ö ÀÖÁö¸¸, ½Ã½ºÅÛÀ» ºÎÆÃÇϱâ À§Çؼ­"
-"´Â µð½ºÅ©µå·¹ÀÌÅ©¿¡¼­ ºÎÆ®½ºÆ®·¦ ÆÄƼ¼ÇÀ» ¸¸µé¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "¾÷±×·¹À̵åÇÒ ·çÆ® ÆÄƼ¼ÇÀ» ãÀ» ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "·çÆ® ÆÄƼ¼Ç"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "½Ã½ºÅÛ¿¡¼­ ·çÆ® ÆÄƼ¼Ç(/)Àº ¾î¶²°ÍÀԴϱî?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "ÆÄƼ¼Ç Å×ÀÌºí º¯°æ»çÇ×À» Àû¿ëÇÏ·Á¸é ¸®ºÎÆÃÀ» ÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Æ÷¸ËÇÒ ÆÄƼ¼ÇÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "¹èµå ºí·° °Ë»ç¸¦ Çմϱî?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "ÆÄƼ¼Ç Æ÷¸Ë"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s ÆÄÀϸ¦ »ý¼ºÇÏ°í Æ÷¸Ë"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "½º¿Ò ¸Þ¸ð¸®°¡ ºÎÁ·ÇÕ´Ï´Ù. Á» ´õ Ãß°¡Çϼ¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "À¯È¿ÇÑ ÆÑÅ°Áö¸¦ ã°í ÀÖ½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "¾÷±×·¹À̵åÇÒ ÆÑÅ°Áö¸¦ °Ë»öÁßÀÔ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "¼³Ä¡ ¶Ç´Â ¾÷±×·¹À̵带 À§ÇÑ µð½ºÅ© °ø°£ÀÌ ºÎÁ·ÇÕ´Ï´Ù. (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Àüü (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "ÃÖ¼Ò (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "±ÇÀå (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Ç÷ÎÇÇ¿¡ ÆÑÅ°Áö ¼±Åøñ·ÏÀ» ÀûÀç ¶Ç´Â ÀúÀåÇÒÁö¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"Çü½Ä(Æ÷¸Ë)Àº ÀÚµ¿¼³Ä¡ »ý¼º Ç÷ÎÇÇ¿Í µ¿ÀÏÇÕ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Ç÷ÎÇÇ¿¡¼­ Àбâ"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Ç÷ÎÇÇ¿¡¼­ Àд Áß"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "ÆÑÅ°Áö ¼±Åøñ·Ï Ç÷ÎÇÇ µð½ºÅ©¸¦ ³ÖÀ¸¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Ç÷ÎÇÇ¿¡ ÀúÀå"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "¼±ÅÃµÈ ¿ë·®ÀÌ »ç¿ëÇÒ ¼ö ÀÖ´Â °ø°£º¸´Ù Å®´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"¸¸¾à ¾Æ·¡¿¡ ¿­°ÅµÈ ¸ðµç CD¸¦ °¡Áö°í ÀÖ´Ù¸é, ¡¸È®ÀΡ¹À», \n"
-"ÀüÇô °¡Áö°í ÀÖÁö ¾Ê´Ù¸é, ¡¸Ãë¼Ò¡¹¸¦, \n"
-"ÀϺθ¸ °¡Áö°í ÀÖ´Ù¸é, ¾ø´Â CD¸¦ ¼±ÅÃÇØÁ¦ÇÑ ÈÄ¿¡ ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "¡¸%s¡¹¶ó°í Ç¥½ÃµÈ CDROM"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "¼³Ä¡ ÁغñÁßÀÔ´Ï´Ù"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-" %s ÆÑÅ°Áö ¼³Ä¡ Áß... \n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "¼³Ä¡Àü ȯ°æ¼³Á¤"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ºÎÆà Ç÷ÎÇǸ¦ %s µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "¾÷µ¥ÀÌÆ® ¸ðµâ Ç÷ÎÇǸ¦ %s µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "»ç¿ë°¡´ÉÇÑ ÆÑÅ°ÁöÀÇ ¸®½ºÆ®¸¦ ¹Ì·¯ »çÀÌÆ®¿¡ Á¢¼ÓÇؼ­ ¹Þ½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "ÆÑÅ°Áö¸¦ ¹ÞÀ» ¹Ì·¯ »çÀÌÆ®¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "»ç¿ë°¡´ÉÇÑ ÆÑÅ°ÁöÀÇ ¸®½ºÆ®¸¦ ¹Ì·¯ »çÀÌÆ®¿¡ Á¢¼ÓÇؼ­ ¹Þ½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "´ÔÀÇ ½Ã°£´ë´Â ¾îµðÀԴϱî?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Çϵå¿þ¾î ½Ã°è GMT ¼³Á¤"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "ÀÚµ¿ ½Ã°£ µ¿±âÈ­ (NTP »ç¿ë)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ¼­¹ö"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "¿ø°Ý CUPS ¼­¹ö"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "ÇÁ¸°ÅÍ ¾øÀ½"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "¶Ç ´Ù¸¥°ÍÀÌ ¼³Ä¡µÇ¾î ÀÖ½À´Ï±î?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "¿ä¾à¼³¸í"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "¸¶¿ì½º"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "½Ã°£´ë"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "ÇÁ¸°ÅÍ"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN Ä«µå"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "»ç¿îµå Ä«µå"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV Ä«µå"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Áö¿ª ÆÄÀϵé"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "root ¾ÏÈ£ ¼³Á¤"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "¾ÏÈ£ ¾øÀ½"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "ÀÌ ¾ÏÈ£´Â ³Ê¹« ´Ü¼øÇÕ´Ï´Ù.( Àû¾îµµ %d ±ÛÀÚ´Â ³Ñ¾î¾ß ÇÕ´Ï´Ù)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "»ç¿ëÀÚ ÀÎÁõ"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "ÀÎÁõ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP ±â¹Ý DN"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP ¼­¹ö"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "ÀÎÁõ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS µµ¸ÞÀÎ"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ¼­¹ö"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "ù¹ø° Ç÷ÎÇÇ µå¶óÀ̺ê"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "µÎ¹ø° Ç÷ÎÇÇ µå¶óÀ̺ê"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "°Ç³Ê¶Ù±â"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"ºÎÆ® µð½ºÅ©´Â ÀϹÝÀûÀÎ ºÎÆ®·Î´õ¸¦ »ç¿ëÇÏÁö ¾Ê°í, ¸®´ª½º ½Ã½ºÅÛÀ¸·Î ºÎÆÃÇÏ´Â\n"
-"¹æ¹ýÀ» Á¦°øÇÕ´Ï´Ù. ¸¸¾à LILO(¶Ç´Â Grub)¸¦ »ç¿ëÇÏÁö ¾Ê°Å³ª, ´Ù¸¥ ¿î¿µÃ¼Á¦°¡\n"
-"LILO¸¦ Á¦°ÅÇϰųª ¶Ç´Â LILO°¡ Çϵå¿þ¾î ¼³Á¤°ú ¸ÂÁö ¾ÊÀ» ¶§, À¯¿ëÇÕ´Ï´Ù.\n"
-"ºÎÆ® µð½ºÅ©´Â ¶ÇÇÑ ¸Çµå·¹ÀÌÅ© º¹±¸ À̹ÌÁö¿Í ÇÔ²² »ç¿ëµÇ¾î ½É°¢ÇÑ\n"
-"½Ã½ºÅÛ ¹®Á¦¸¦ ½±°Ô º¹±¸ÇÒ ¼ö ÀÖ½À´Ï´Ù. ´ÔÀÇ ½Ã½ºÅÛÀ» À§ÇÑ ºÎÆ® µð½ºÅ©¸¦\n"
-"¸¸µå½Ã°Ú½À´Ï±î?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Á˼ÛÇÕ´Ï´Ù. »ç¿ë°¡´ÉÇÑ Ç÷ÎÇÇ µå¶óÀ̺갡 ¾ø½À´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ºÎÆ® µð½ºÅ©¸¦ ¸¸µé¶§ »ç¿ëÇÒ Ç÷ÎÇÇ µå¶óÀ̺긦 ¼±ÅÃÇØ ÁÖ¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ç÷ÎÇÇ µð½ºÅ©¸¦ %s µå¶óÀ̺꿡 ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "ºÎÆ® µð½ºÅ© »ý¼ºÁß"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "ºÎÆ® ·Î´õ ÁغñÁß"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot¸¦ »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot ¼³Ä¡ ½ÇÆÐ. \n"
-"ù¹ø° ÆÄƼ¼ÇÀ» ÈѼÕÇÒÁö¶óµµ °­Á¦ ¼³Ä¡ÇÒ±î¿ä?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "ºÎÆ®·Î´õ ¼³Ä¡ Áß"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "ºÎÆ®·Î´õ ¼³Ä¡°¡ ½ÇÆÐÇß½À´Ï´Ù. ´ÙÀ½°ú °°Àº ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"ºÎÆ®·Î´õ°¡ Á¦´ë·Î ÀÛµ¿Çϱâ À§Çؼ­´Â °ø°³ Æß¿þ¾î ºÎÆ® ÀåÄ¡¸¦ º¯°æÇÒ Çʿ伺ÀÌ\n"
-"ÀÖÀ» ¼öµµ ÀÖ½À´Ï´Ù. ¸¸¾à ÀçºÎÆÃÈÄ¿¡ ºÎÆ®·Î´õ ÇÁ·ÒÇÁÆ®°¡ ³ªÅ¸³ªÁö ¾Ê´Â´Ù¸é,\n"
-"ÀçºÎÆýÿ¡ ¸í·É-¿É¼Ç-O-F¸¦ °è¼Ó ´©¸£°í ÀÖ´Ù°¡ ´ÙÀ½°ú °°ÀÌ ÀÔ·ÂÇϼ¼¿ä:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"shut-down\n"
-"±×·¯°í³ª¸é ´ÙÀ½ºÎÅÍ´Â ºÎÆ®·Î´õ ÇÁ·ÒÇÁÆ®¸¦ º¼ ¼ö ÀÖÀ» °ÍÀÔ´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s µå¶óÀ̺꿡 ºó Ç÷ÎÇÇ µð½ºÅ©¸¦ ³ÖÀ¸¼¼¿ä"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇÇ µð½ºÅ© »ý¼º Áß"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"¸î¸î ´Ü°è°¡ ¿ÏÀüÈ÷ ³¡³ªÁö ¾Ê¾Ò½À´Ï´Ù.\n"
-"\n"
-"Á¤¸» Áö±Ý Á¾·á ÇϽðڽÀ´Ï±î?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ÃàÇÏÇÕ´Ï´Ù. ¼³Ä¡°¡ ¼º°øÀûÀ¸·Î ³¡³µ½À´Ï´Ù.\n"
-"ºÎÆ® ¹Ìµð¾î¸¦ Á¦°ÅÇÏ°í ¸®ÅÏÀ» ´­·¯¼­ ¸®ºÎÆà Çϼ¼¿ä.\n"
-"\n"
-"\n"
-"ÀÌ ¹öÀüÀÇ ¸Çµå·¹ÀÌÅ© ¸®´ª½ºÀÇ ¹ö±×¼öÁ¤ Á¤º¸´Â http://www.linux-mandrake.com/"
-"en/82errata.php3\n"
-"¿¡¼­ ¾òÀ¸½Ç ¼ö ÀÖ½À´Ï´Ù.\n"
-"\n"
-"\n"
-"¼³Ä¡ÈÄ ½Ã½ºÅÛ ¼³Á¤¿¡ ´ëÇÑ Á¤º¸´Â °ø½Ä ¸Çµå·¹ÀÌÅ© ¸®´ª½º À¯Àú °¡À̵带\n"
-"Âü°íÇϽñ⠹ٶø´Ï´Ù."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇÇ µð½ºÅ© »ý¼º"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"ÀÚµ¿ ¼³Ä¡´Â ¿øÇÑ´Ù¸é ¿Ïº®ÇÑ ÀÚµ¿È­°¡ °¡´ÉÇÕ´Ï´Ù.\n"
-"ÀÌ·² °æ¿ì, ÇÏµå µå¶óÀ̺긦 Á¡À¯ÇØ ¹ö¸³´Ï´Ù!\n"
-"(ÀÌ°ÍÀº ¶Ç ´Ù¸¥ ÄÄÇ»ÅÍ¿¡ µ¿ÀÏÇÏ°Ô ¼³Ä¡ÇÒ ¶§¸¦ À§ÇÑ °ÍÀÔ´Ï´Ù.)\n"
-"\n"
-"ÀϹÝÀûÀ¸·Î Á÷Á¢ ¼³Ä¡ÇÏ´Â °ÍÀÌ ÁÁ½À´Ï´Ù.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "ÀÚµ¿"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Àç½Ãµµ"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "¼±ÅÃµÈ ÆÑÅ°Áö ¸ñ·Ï ÀúÀå"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "¸®´ª½º-¸Çµå·¹ÀÌÅ© ¼³Ä¡ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> Ç׸ñ°£ À̵¿        |  <Space> ¼±Åà      |  <F12> ´ÙÀ½ È­¸é"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu°¡ ¾øÀ½"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "ÆÄÀÏ ¼±ÅÃ"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "°í±Þ"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "±â´Ù·Á ÁÖ¼¼¿ä"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Á¤º¸"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Æ®¸® È®Àå"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Æ®¸® Á¢±â"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "±×·ìº°/ÆÑÅ°Áöº° Á¤·Ä Àüȯ"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "À߸øµÈ ¼±ÅÃÀÔ´Ï´Ù, ´Ù½Ã Çϼ¼¿ä\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "´ÔÀÇ ¼±ÅÃÀº? (±âº»°ª %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "´ÔÀÇ ¼±ÅÃÀº? (±âº»°ª %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "¿É¼Çµé: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "aboot¸¦ »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "´ÔÀÇ ¼±ÅÃÀº? (±âº»°ª %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "üÄÚ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "µ¶ÀÏ"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "µåº¸¶ô"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "½ºÆäÀÎ"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Çɶõµå"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "ÇÁ¶û½º"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "³ë¸£¿þÀÌ"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Æú¶õµå"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "·¯½Ã¾Æ"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "½º¿þµ§"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "¿µ±¹"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "¹Ì±¹"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "¾Ë¹Ù´Ï¾Æ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "¹Ì±¹ (±¸¹öÀü)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "¹Ì±¹ (ŸÀÚ±â)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "¹Ì±¹ (À½¼ºÇÐ)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (¶óƾ)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "º§±â¿¡"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "¹Ì±¹ (À½¼ºÇÐ)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "ºÒ°¡¸®¾Æ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "ºê¶óÁú (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "º§¶ó·ç½Ã¾Æ"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "½ºÀ§½º (µ¶¾î)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "½ºÀ§½º (ºÒ¾î)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "üÄÚ (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "µ¶ÀÏ (dead Å° ¾øÀ½)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "µ§¸¶Å©"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "µåº¸¶ô(US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "µåº¸¶ô(³ë¸£¿þÀÌ)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "µåº¸¶ô(US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "¿¡½ºÅä´Ï¾Æ"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "±×·çÁö¾Æ(·¯½Ã¾Æ¾î)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "±×·çÁö¾Æ (¶óƾ)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "±×¸®½º"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Çë°¡¸®"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Å©·Î¾ÆƼ¾Æ"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "À̽º¶ó¿¤"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "À̽º¶ó¿¤ (À½¼ºÇÐ)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "À̶õ"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "¾ÆÀ̽½·£µå"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "ÀÌÅ»¸®¾Æ"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ÀϺ» 106Å°"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "ÇÑ±Û Å°º¸µå"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "¶óƾ ¾Æ¸Þ¸®Ä«"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "¸®Åõ¾Æ´Ï¾Æ AZERTY (±¸Çü)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "¸®Åõ¾Æ´Ï¾Æ AZERTY (½ÅÇü)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "¸®Åõ¾Æ´Ï¾Æ (¼ýÀÚ¿­ QWERTY)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "¸®Åõ¾Æ´Ï¾Æ (À½¼ºÇÐ QWERTY)"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "¶óÆ®¹Ù¾Æ"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "¸¶Äɵµ´Ï¾Æ"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "³×µ¨¶õµå"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Æú¶õµå (QwertY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Æú¶õµå (QwertZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Æ÷·çÅõÄ®"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "ij³ª´Ù (Äùº¤)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "·Î¸¸ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "·Î¸¸ (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "·¯½Ã¾Æ (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "½½·Îº£´Ï¾Æ"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "½½·Î¹ÙÅ°¾Æ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "½½·Î¹ÙÅ°¾Æ (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "¼¼¸£ºñ¾Æ (½Ã¸±)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Å×À̺í"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "ű¹"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "ŸÁöÅ© Å°º¸µå"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Åͱâ (ÀüÅë ¡¸F¡¹¸ðµ¨"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ÅÍÅ° (Çö´ë ¡¸Q¡¹¸ðµ¨"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "¿ìÅ©¶óÀ̳ª"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US Å°º¸µå (±¹Á¦)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "º£Æ®³² (¼ýÀÚ¿­ QWERTY)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "À¯°í½½¶óºñ¾Æ (¶óƾ)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "¼øȯ ¸¶¿îÆ® %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "³í¸® º¼·ýÀ» ¸ÕÀú Á¦°ÅÇØ ÁÖ¼¼¿ä.\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "·ÎÁöÅØ ¸¶¿ì½º¸Ç/ÆÛ½ºÆ®¸¶¿ì½º (½Ã¸®¾ó)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ÀϹÝÀûÀÎ PS2 ÈÙ ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "ALPS ±Û¶óÀ̵åÆ÷ÀÎÆ®"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Ä˽ÌÅÏ ¾ÅÅ· ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Áö´Ï¾î½º ³Ý¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Áö´Ï¾î½º ³Ý½ºÅ©·Ñ"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 ¹öÆ°"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "ÀϹÝÀûÀÎ 2¹öÆ° ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "ÀÏ¹Ý ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "ÈÙ ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "½Ã¸®¾ó ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "ÀϹÝÀûÀÎ 3¹öÆ° ¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "¸¶ÀÌÅ©·Î¼ÒÇÁÆ® ÀÎÅÚ¸®¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "·ÎÁöÅØ ¸¶¿ì½º¸Ç"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "¸¶¿ì½º ½Ã½ºÅÛ"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "·ÎÁöÅØ CC ½Ã¸®Áî"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "·ÎÁöÅØ ¸¶¿ì½º¸Ç+/ÆÛ½ºÆ®¸¶¿ì½º+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM ½Ã¸®Áî"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM È÷ƮŸºí·¿"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "·ÎÁöÅØ ¸¶¿ì½º (½Ã¸®¾ó, ¿À·¡µÈ C7 ÇüÅÂ)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "¹ö½º¸¶¿ì½º"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 ¹öÆ°"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 ¹öÆ°"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "¾øÀ½"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "¸¶¿ì½º ¾øÀ½"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "¸¶¿ì½º¸¦ Å×½ºÆ®Çϼ¼¿ä."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "¸¶¿ì½º¸¦ È°¼ºÈ­ÇÏ·Á¸é"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "¸¶¿ì½ºÈÙÀ» ¿òÁ÷¿© º¸¼¼¿ä."
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-"-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,-*-gulim-bold-r-"
-"normal--16-*-*-*-c-*-ksc5601.1987-0,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Á¾·á"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "´ÙÀ½ ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ÀÌÀü"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "ÀÌ°ÍÀÌ ¸Â½À´Ï±î?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "ÀÎÅͳݿ¡ ¿¬°á"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ADSL ¿¬°áÀº ´ë°³ PPPOE¸¦ »ç¿ëÇÕ´Ï´Ù. \n"
-"ÇÏÁö¸¸, ¾î¶² °æ¿ì¿¡´Â PPTP³ª, ±ØÈ÷ µå¹°°Ô´Â DHCPµµ »ç¿ëµË´Ï´Ù.\n"
-"Àß ¸ð¸£°Ú´Ù¸é, ¡¸PPPOE »ç¿ë¡¹À» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "¾ËÄ«ÅÚ ½ºÇǵåÅÍÄ¡ USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP »ç¿ë"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE »ç¿ë"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP »ç¿ë"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"¾î¶² dhcp Ŭ¶óÀ̾ðÆ®¸¦ »ç¿ëÇÏ°Ú½À´Ï±î?\n"
-"dhcpcd°¡ ±âº»°ªÀÔ´Ï´Ù."
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"¾î¶°ÇÑ ³×Æ®¿÷ ¾î´ðÅ͵µ °¨ÁöµÇÁö ¾Ê¾Ò½À´Ï´Ù.\n"
-"¿¬°á ¼³Á¤À» ÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "³×Æ®¿÷ ÀÎÅÍÆäÀ̽º¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "¾î¶² ¾î´ðÅÍ·Î ÀÎÅͳݿ¡ ¿¬°áÇÒ °ÍÀÎÁö ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "³×Æ®¿÷ Ä«µå¸¦ ãÀ»¼ö ¾ø½À´Ï´Ù"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "³×Æ®¿÷ ¼³Á¤"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"È£½ºÆ®¸íÀ» ¾Ë°í ÀÖ´Ù¸é ÀÔ·ÂÇϼ¼¿ä.\n"
-"ÀϺΠDHCP ¼­¹ö´Â È£½ºÆ®¸íÀ» ¿ä±¸ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"È£½ºÆ®¸íÀº ¿Ïº®ÇÑ Á¤±ÔÇüÀ̾î¾ß ÇÕ´Ï´Ù.\n"
-"¿¹)¡¸mybox.mylab.myco.com¡¹"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "È£½ºÆ®¸í:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "³×Æ®¿÷ ¼³Á¤ ¸¶¹ý»ç"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "¿ÜÀå ISDN ¸ðµ©"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "³»Àå ISDN Ä«µå"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¾î¶² Á¾·ùÀÇ ISDN ¿¬°áÀ» »ç¿ëÇմϱî?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"¾î¶² ISDN ¼³Á¤ ¹æ½ÄÀ» ¼±È£ÇϽʴϱî?\n"
-"\n"
-"* ±âÁ¸ÀÇ ¼³Á¤Àº ISDN4NETÀ» »ç¿ëÇÕ´Ï´Ù. °­·ÂÇÏÁö¸¸ Ãʺ¸ÀÚ¿¡°Õ\n"
-"  ¾î·Æ°í ¶ÇÇÑ Ç¥ÁØÀÌ ¾Æ´Õ´Ï´Ù.\n"
-"\n"
-"* »õ·Î¿î ¼³Á¤Àº ½±°í º¸´Ù Ç¥ÁØÀûÀÌÁö¸¸, °­·ÂÇÑ µµ±¸´Â µð¼Ò\n"
-"  ºÎÁ·ÇÕ´Ï´Ù.\n"
-"\n"
-"¡¸ISDN-LIGHT¡¹¸¦ ÃßõÇÕ´Ï´Ù.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "»õ·Î¿î ¼³Á¤ (ISDN-LIGHT)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "±âÁ¸ÀÇ ¼³Á¤ (ISDN4NET)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN ¼³Á¤"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"°ø±ÞÀÚ¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"¸ñ·Ï¿¡ ¾øÀ¸¸é, ¡¸¸ñ·Ï¿¡ ¾øÀ½¡¹À» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "À¯·´ ÇÁ·ÎÅäÄÝ"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "À¯·´ ÇÁ·ÎÅäÄÝ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "´Ù¸¥ Áö¿ªÀ» À§ÇÑ ÇÁ·ÎÅäÄÝ"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"´Ù¸¥ Áö¿ªÀ» À§ÇÑ ÇÁ·ÎÅäÄÝ\n"
-" Dä³Î (leased lines) ¾Æ´Ô"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "¾î¶² ÇÁ·ÎÅäÄÝÀ» »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "¾î¶² Á¾À¯ÀÇ Ä«µå¸¦ °¡Áö°í ÀÖ½À´Ï±î?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "¸ð¸£°ÚÀ½"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"¸¸¾à ISA Ä«µå¸¦ °¡Áö°í ÀÖ´Ù¸é, ´ÙÀ½ È­¸é¿¡¼­ ¼³Á¤°ªÀÌ Á¤È®ÇØ¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"¸¸¾à PCMCIA Ä«µå¸¦ °¡Áö°í ÀÖ´Ù¸é, IRQ¿Í IO °ªÀ» ¾Ë°í ÀÖ¾î¾ß ÇÕ´Ï´Ù.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "ÁßÁö"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "°è¼Ó"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "¾î´À °ÍÀÌ ´ÔÀÇ ISDN Ä«µåÀԴϱî?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI Ä«µå°¡ °¨ÁöµÇ¾úÁö¸¸, ±× À¯ÇüÀ» ¾Ë ¼ö ¾ø½À´Ï´Ù. ´ÙÀ½ È­¸é¿¡¼­ PCI Ä«"
-"µå¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI Ä«µå °Ë»ö ½ÇÆÐ. ´ÙÀ½ È­¸é¿¡¼­ Á÷Á¢ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "¾î¶² ½Ã¸®¾ó Æ÷Æ®¿¡ ¸¶¿ì½º°¡ ¿¬°áµÇ¾î ÀÖ³ª¿ä?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "´ÙÀ̾ó¾÷ ¿É¼Ç"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "¿¬°á À̸§"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "ÀüÈ­ ¹øÈ£"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "·Î±×ÀÎ ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "½ºÅ©¸³Æ® ±â¹Ý"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Å͹̳¯ ±â¹Ý"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "µµ¸ÞÀÎ À̸§"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "ù¹ø° DNS ¼­¹ö (¿É¼Ç)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "µÎ¹ø° DNS ¼­¹ö (¿É¼Ç)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"¿¬°áÀ» ÇØÁ¦Çϰųª ´Ù½Ã ¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"¿¬°áÀ» ´Ù½Ã ¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "ÇöÀç ÀÎÅͳݿ¡ ¿¬°áµÇ¾î ÀÖ½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"ÀÎÅͳݿ¡ ¿¬°áÇϰųª ¿¬°áÀ» Àç¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "ÇöÀç ÀÎÅͳݿ¡ ¿¬°áµÇ¾î ÀÖÁö ¾Ê½À´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "¿¬°áµÊ"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "¿¬°á ²÷±â..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Áö±Ý ³×Æ®¿÷ ¼³Á¤"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "ÀÎÅÍ³Ý ¿¬°á & ¼³Á¤"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "ÀÌÁ¦ ¡¸%s¡¹¿¬°áÀ» ¼³Á¤ÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"ÀÌÁ¦ ¡¸%s¡¹¿¬°áÀ» ¼³Á¤ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"\n"
-"½ÃÀÛÇÏ·Á¸é ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "³×Æ®¿÷ ȯ°æ ¼³Á¤"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Áö±Ý ³×Æ®¿÷À» »ç¿ëÇÏ¿© ¼³Ä¡ÇÏ°í ÀÖ´Â ÁßÀ̹ǷÎ, ³×Æ®¿÷ ¼³Á¤Àº ÀÌ¹Ì µÇ¾î ÀÖ½À´Ï"
-"´Ù.\n"
-"¡¸È®ÀΡ¹À» ´­·¯ ÇöÀç ¼³Á¤À» À¯ÁöÇϰųª, ¡¸Ãë¼Ò¡¹¸¦ ´­·¯ ÀÎÅͳÝ/³×Æ®¿÷ ¿¬°áÀ» "
-"´Ù½Ã ¼³Á¤Çϼ¼¿ä.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"³×Æ®¿÷ ¼³Á¤ ¸¶¹ý»ç¿¡ Àß ¿À¼Ì½À´Ï´Ù.\n"
-"\n"
-"Áö±Ý ÀÎÅͳÝ/³×Æ®¿÷ ¿¬°áÀ» ¼³Á¤ÇÏ·Á ÇÕ´Ï´Ù.\n"
-"ÀÚµ¿ °Ë»öÀ» »ç¿ëÇÏ°í ½ÍÁö ¾Ê´Ù¸é, üũ¹Ú½º¸¦ ÇØÁ¦Çϼ¼¿ä.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "¼³Á¤ÇÒ ÇÁ·ÎÆÄÀÏÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "ÀÚµ¿°Ë»ö »ç¿ë"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "ÀåÄ¡¸¦ °Ë»öÇÏ°í ÀÖ½À´Ï´Ù..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "ÀÏ¹Ý ¸ðµ© ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s Æ÷Æ®¿¡¼­ ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "ÀÎÅÍÆäÀ̽º %s»ó¿¡¼­ ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "ijÀÌºí ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "ijÀÌºí ¿¬°á ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ÀÌ´õ³Ý Ä«µå ¹ß°ß"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "¼³Á¤ÇÒ ¿¬°áÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"ÀÎÅÍ³Ý Á¢¼Ó¹æ½ÄÀ» ¿©·¯°³ ¼³Á¤Çß½À´Ï´Ù.\n"
-"¿¬°á¿¡ »ç¿ëÇÒ ¹æ½ÄÀ» ¼±ÅÃÇϼ¼¿ä.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "ÀÎÅÍ³Ý ¿¬°á"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "ºÎÆýÿ¡ ¿¬°áÇϵµ·Ï ÇÏ°Ú½À´Ï±î?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "³×Æ®¿÷ ¼³Á¤"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "³×Æ®¿÷À» ´Ù½Ã ½ÃÀÛÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"³×Æ®¿÷À» ´Ù½Ã ½ÃÀÛÇÏ´Â µµÁß¿¡ ¹®Á¦°¡ ¹ß»ýÇß½À´Ï´Ù:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"ÃàÇÏÇÕ´Ï´Ù. ³×Æ®¿÷/ÀÎÅÍ³Ý ¼³Á¤ÀÌ ¿Ï·áµÇ¾ú½À´Ï´Ù.\n"
-"\n"
-"ÀÌÁ¦ ¼³Á¤ÀÌ ½Ã½ºÅÛ¿¡ Àû¿ëµÉ °ÍÀÔ´Ï´Ù.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"¿Ï·áµÈ ÈÄ¿¡, X¸¦ ´Ù½Ã ½ÃÀÛÇÏ¿© È£½ºÆ®¸í º¯°æ¿¡ µû¸¥\n"
-"¹®Á¦ ¹ß»ýÀ» ÇÇÇϽñ⠹ٶø´Ï´Ù."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"°æ°í: ÀÌ ÀåÄ¡´Â ÀÌ¹Ì ÀÎÅÍ³Ý ¿¬°á¿ëÀ¸·Î ¼³Á¤µÇ¾î ÀÖ½À´Ï´Ù.\n"
-"±×³É ÇöÀç ¼³Á¤À» À¯ÁöÇϼ¼¿ä.\n"
-"¾Æ·¡ ÀԷ¶õÀ» º¯°æÇϸé ÇöÀç ¼³Á¤À» µ¤¾î¾²°Ô µË´Ï´Ù."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"ÀÌ ½Ã½ºÅÛÀ» À§ÇÑ IP ¼³Á¤À» ÀÔ·ÂÇØ ÁÖ¼¼¿ä.\n"
-"°¢°¢ÀÇ Ç׸ñÀº¡¸.¡¹À¸·Î ±¸ºÐµÈ ½ÊÁø¼ö IP ÁÖ¼Ò·Î ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù.\n"
-"(¿¹, 1.2.3.4)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s ³×Æ®¿÷ Ä«µå ¼³Á¤Áß"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s µå¶óÀ̹ö)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ÁÖ¼Ò"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "³Ý¸¶½ºÅ©"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP ÀÚµ¿ÇÒ´ç"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÁÖ¼Ò´Â 1.2.3.4°ú °°Àº Çü½ÄÀ̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"È£½ºÆ® À̸§À» ÀÔ·ÂÇØ ÁÖ¼¼¿ä.\n"
-"È£½ºÆ® À̸§Àº ``mybox.mylab.myco.com''°ú °°ÀÌ ¿ÏÀüÇÑ È£½ºÆ® \n"
-"À̸§À̾î¾ß ÇÕ´Ï´Ù. \n"
-"°ÔÀÌÆ® ¿þÀÌ°¡ ÀÖ´Ù¸é ±× IP ÁÖ¼Òµµ ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ¼­¹ö"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "°ÔÀÌÆ®¿þÀÌ ÀåÄ¡"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "ÇÁ¶ô½Ã ¼³Á¤"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "À¥ ÇÁ¶ô½Ã"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP ÇÁ¶ô½Ã"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "³×Æ®¿÷Ä«µå ID ÃßÀû (·¦Å¾¿¡ À¯¿ëÇÔ)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "ÇÁ¶ô½Ã À̸§Àº httP://... À̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "ÇÁ¶ô½Ã À̸§Àº ftp://... À̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "ÀÎÅÍ³Ý ¼³Á¤"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Áö±Ý ÀÎÅÍ³Ý ¿¬°áÀ» ½ÃµµÇØ º¸½Ã°Ú½À´Ï±î?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "¿¬°á Å×½ºÆ® Áß..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Áö±Ý ½Ã½ºÅÛÀÌ ÀÎÅͳݿ¡ ¿¬°áµÇ¾ú½À´Ï´Ù."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "º¸¾È»óÀÇ ÀÌÀ¯·Î ÀÌÁ¦ ¿¬°áÀ» ²÷À» °ÍÀÔ´Ï´Ù."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"½Ã½ºÅÛÀÌ ÀÎÅͳݿ¡ ¿¬°áµÇÁö ¾ÊÀº µíÇÕ´Ï´Ù.\n"
-"¿¬°á ¼³Á¤À» ´Ù½ÃÇØ º¸¼¼¿ä."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "¿¬°á ¼³Á¤"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "¾Æ·¡ ¾ç½ÄÀ» ä¿ö ÁÖ¼¼¿ä."
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Ä«µå IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Ä«µå ¸Þ¸ð¸® (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Ä«µå IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Ä«µå IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Ä«µå IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "´ÔÀÇ °³ÀÎ ÀüÈ­ ¹øÈ£"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "°ø±ÞÀÚ À̸§ (¿¹ provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "°ø±ÞÀÚ ÀüÈ­¹øÈ£"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "°ø±ÞÀÚ DNS 1 (¿É¼Ç)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "°ø±ÞÀÚ DNS 2 (¿É¼Ç)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "±¹°¡ ¼±ÅÃ"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "´ÙÀÌ¾ó¸µ ¸ðµå"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "¿¬°á ¼Óµµ"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "¿¬°á ½Ã°£ÃÊ°ú (ÃÊ)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "·Î±×ÀÎ °èÁ¤(»ç¿ëÀÚ¸í)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "°èÁ¤ ¾ÏÈ£"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "¸¶¿îÆ® ½ÇÆÐ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "ÀÌ ½Ã½ºÅÛ¿¡¼­´Â È®ÀåÆÄƼ¼ÇÀÌ Áö¿øµÇÁö ¾Ê½À´Ï´Ù."
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"ÆÄƼ¼Ç Å×ÀÌºí¿¡¼­ ºó °ø°£ÀÌ ÀÖÁö¸¸ »ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"À¯ÀÏÇÑ ÇØ°áÃ¥Àº ÁÖ ÆÄƼ¼ÇµéÀÌ È®Àå ÆÄƼ¼ÇµéÀÇ µÚ¿¡ ÀÖ´Â ºó °ø°£À» Â÷ÁöÇϵµ·Ï "
-"¿È±â´Â °ÍÀÔ´Ï´Ù."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s ÆÄÀϷκÎÅÍÀÇ º¹±¸ ½ÇÆÐ: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s ÆÄÀÏ¿¡ ¾²±â ¿À·ù"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Çϵåµå½ºÅ©¿¡ ÀÌ»óÀÌ ¹ß»ýÇß½À´Ï´Ù. \n"
-"µ¥ÀÌÅÍ ¹«°á¼º °Ë»ç°¡ ½ÇÆÐÇß½À´Ï´Ù. \n"
-"ÀÌ°ÍÀº µð½ºÅ©¿¡ ±â·ÏµÇ´Â µ¥ÀÌÅ͸¦ ÀÒ¾î ¹ö¸°´Ù´Â °ÍÀ» ÀǹÌÇÕ´Ï´Ù."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "Çʼö ÆÑÅ°Áö"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "Áß¿äÇÑ ÆÑÅ°Áö"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ÈǸ¢ÇÑ ÆÑÅ°Áö"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ÁÁÀº ÆÑÅ°Áö"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "±¦ÂúÀº ÆÑÅ°Áö"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "·ÎÄà ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "¿ø°Ý ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "¿ø°Ý CUPS ¼­¹öÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "¿ø°Ý LPD ¼­¹öÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "³×Æ®¿÷ ÇÁ¸°ÅÍ (¼ÒÄÏ)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "»ï¹Ù/À©µµ¿ìÁî 95/98/NT»óÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "³×Æ®¿þ¾î ¼­¹ö»óÀÇ ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "ÇÁ¸°ÅÍ ÀåÄ¡ URIÀ» ÀÔ·ÂÇϼ¼¿ä."
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "ÀÛ¾÷À» ¸í·ÉÀ¸·Î ÆÄÀÌÇÁ ¿¬°á"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "¾Ë ¼ö¾ø´Â ¸ðµ¨"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "·ÎÄà ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "¿ø°Ý ÇÁ¸°ÅÍ"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "%s ÆÄÀÏ¿¡ ¾²±â ¿À·ù"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "³¯(RAW) ÇÁ¸°ÅÍ (µå¶óÀ̹ö »ç¿ë¾ÈÇÔ)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s¿¡)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ÀÌ ¼­¹ö»óÀÇ)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS ¼­¹ö IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (±âº»°ª)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "ÇÁ¸°ÅÍ ¿¬°á¹æ¹ýÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ÇÁ¸°ÅÍ°¡ ¾î¶»°Ô ¿¬°áµÇ¾î ÀÖ½À´Ï±î?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"¿ø°Ý CUPS ¼­¹öÀÇ ÇÁ¸°ÅÍ´Â ¿©±â¼­ ¼³Á¤ÇÒ ÇÊ¿ä°¡ \n"
-"¾ø½À´Ï´Ù; ÀÌ·± ÇÁ¸°ÅÍ´Â ÀÚµ¿À¸·Î °¨ÁöµÇ¾î Áý´Ï´Ù. ÀÌ¿Í °°Àº °æ¿ì\n"
-"¡¸¿ø°Ý CUPS ¼­¹öÀÇ ÇÁ¸°ÅÍ¡¹¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "¼³Á¤"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "¿ø°Ý CUPS ¼­¹ö"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"¿ø°Ý CUPS ¼­¹ö¿¡ ´ëÇؼ­´Â ¿©±â¼­ ÇÁ¸°Å͸¦ ¼³Á¤ÇÒ ÇÊ¿ä°¡\n"
-"¾ø½À´Ï´Ù; CUPS ¼­¹ö´Â ÀÚµ¿À¸·Î ÇÁ¸°ÅÍ Á¤º¸¸¦ ¾Ë·ÁÁÝ´Ï´Ù.\n"
-"ÇöÀç ¾Ë·ÁÁø ¸ðµç ÇÁ¸°ÅÍ´Â ¡¸±âº» ÇÁ¸°ÅÍ¡¹¿µ¿ª¿¡ ³ª¿­µË´Ï´Ù.\n"
-"±âº» ÇÁ¸°ÅÍ·Î »ç¿ëÇÒ ÇÁ¸°Å͸¦ ¼±ÅÃÇÏ°í ¡¸Àû¿ë/ÇÁ¸°ÅÍ ´Ù½Ã Àб⡹\n"
-"¹öÆ°À» ´©¸£¼¼¿ä. ÇÁ¸°ÅÍ ¸ñ·ÏÀ» °»½ÅÇÏ·Á ÇÒ¶§µµ µ¿ÀÏÇÑ ¹öÆ°À»\n"
-"´©¸£¼¼¿ä. (CUPS°¡ ½ÃÀÛµÈ ÈÄ, ¸ðµç ¿ø°Ý ÇÁ¸°ÅÍ°¡ º¸¿©Áö±â±îÁö´Â\n"
-"30ÃÊ °¡·®ÀÇ ½Ã°£ÀÌ °É¸³´Ï´Ù.)\n"
-"CUPS ¼­¹ö°¡ ´Ù¸¥ ³×Æ®¿÷¿¡ ÀÖ´Ù¸é, CUPS ¼­¹öÀÇ IP ÁÖ¼Ò¿Í\n"
-"Æ÷Æ® ¹øÈ£(¿É¼Ç)¸¦ ÁöÁ¤Çؾ߸¸ ¼­¹ö·ÎºÎÅÍ ÇÁ¸°ÅÍ Á¤º¸¸¦ ¹Þ¾Æ¿Ã ¼ö\n"
-"ÀÖ½À´Ï´Ù. ÀÌ·± °æ¿ì°¡ ¾Æ´Ï¶ó¸é ÀÌ ¿µ¿ªµéÀº ±×³É ºñ¿öµÎ¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:72
-#, fuzzy
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"ÀϹÝÀûÀ¸·Î CUPS´Â ³×Æ®¿÷ȯ°æ¿¡ µû¶ó ÀÚµ¿À¸·Î ¼³Á¤µÇ±â\n"
-"¶§¹®¿¡, Áö¿ª ³×Æ®¿÷¿¡ ÀÖ´Â CUPS ¼­¹öÀÇ ÇÁ¸°Å͸¦ »ç¿ëÇÒ\n"
-"¼ö ÀÖ½À´Ï´Ù. ±×·¯³ª ¸¸¾à¿¡ ÀÌ°ÍÀÌ ¿Ã¹Ù¸£°Ô ÀÛµ¿ÇÏÁö ¾ÊÀ¸¸é,\n"
-"¡¸ÀÚµ¿ CUPS ¼³Á¤¡¹À» ÇØÁ¦ÇϽðí, ¡¸/etc/cups/cupsd.conf¡¹\n"
-"¸¦ Á÷Á¢ ¼öÁ¤ÇØ ÁÖ¼¼¿ä. ³ªÁß¿¡ CUPS¸¦ ´Ù½Ã ½ÇÇàÇÏ´Â °ÍÀ»\n"
-"ÀØÁö¸¶¼¼¿ä. (¸í·É¾î: ¡¸service cups restart¡¹ )"
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ÁÖ¼Ò´Â ¡¸192.168.1.20¡¹°ú °°Àº Çü½ÄÀ̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Æ÷Æ® ¹øÈ£´Â Á¤¼öÀ̾î¾ß ÇÕ´Ï´Ù!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS ¼­¹ö IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Æ÷Æ®"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "ÀÚµ¿ CUPS ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "ÀåÄ¡ °Ë»ö Áß ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Æ÷Æ® °Ë»ç"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "ÇÁ¸°ÅÍ Ãß°¡"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "·ÎÄà ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "¿ø°Ý ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "ÀÚµ¿°Ë»ö »ç¿ë"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "¿ø°Ý ÇÁ¸°Å͸í"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s ¹ß°ß"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "ÇÁ¸°ÅÍ ÀåÄ¡ URIÀ» ÀÔ·ÂÇϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "·ÎÄà ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "¾î¶² ½Ã¸®¾ó Æ÷Æ®¿¡ ¸¶¿ì½º°¡ ¿¬°áµÇ¾î ÀÖ³ª¿ä?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "ÇÁ¸°ÅÍ ÀåÄ¡ URIÀ» ÀÔ·ÂÇϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "ÀÎÅÍ³Ý ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "ÆÑÅ°Áö ¼³Ä¡ Áß..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "ÆÑÅ°Áö ¼³Ä¡ Áß..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅͺ£À̽º Àд Áß ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅͺ£À̽º Àд Áß ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "¿ø°Ý LPD ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"¿ø°Ý LPD ÇÁ¸°Å͸¦ »ç¿ëÇϱâ À§Çؼ­´Â\n"
-"±× ÇÁ¸°ÅÍ ¼­¹öÀÇ È£½ºÆ®¸í°ú ±× ¼­¹ö»óÀÇ ÇÁ¸°ÅÍ À̸§À»\n"
-"ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "¿ø°Ý È£½ºÆ®¸í"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "¿ø°Ý ÇÁ¸°Å͸í"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "¿ø°Ý È£½ºÆ®¸íÀ» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "¿ø°Ý ÇÁ¸°Å͸íÀÌ ºüÁ³½À´Ï´Ù!!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"»ï¹Ù ÇÁ¸°ÅÍ·Î ÀμâÇÏ·Á¸é, »ï¹Ù ¼­¹öÀÇ È£½ºÆ®¸í \n"
-"(ÁÖÀÇ! ±× ¼­¹öÀÇ TCP/IP È£½ºÆ®¸í°ú´Â À̸§ÀÌ ´Ù¸¦ ¼ö ÀÖ½À´Ï´Ù.)°ú, \n"
-"°¡´ÉÇÏ´Ù¸é, ±× ¼­¹öÀÇ IP ÁÖ¼Ò ±×¸®°í ¾×¼¼½ºÇÏ·Á´Â ÇÁ¸°ÅÍÀÇ \n"
-"°øÀ¯ À̸§, Á¤½Ä »ç¿ëÀÚ¸í, ¾ÏÈ£, ÀÛ¾÷±×·ì¸íÀ» \n"
-"ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB ¼­¹ö È£½ºÆ®"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB ¼­¹ö IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "°øÀ¯ À̸§"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "ÀÛ¾÷ ±×·ì"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¼­¹ö À̸§ ¶Ç´Â ¼­¹ö IP¸¦ ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "»ï¹Ù °øÀ¯ À̸§À» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "³Ý¿þ¾î ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"³Ý¿þ¾î ÇÁ¸°ÅÍ·Î ÀμâÇÏ·Á¸é, ³Ý¿þ¾î ¼­¹öÀÇ È£½ºÆ®¸í \n"
-"(ÁÖÀÇ! ±× ¼­¹öÀÇ TCP/IP È£½ºÆ®¸í°ú´Â À̸§ÀÌ ´Ù¸¦ ¼ö ÀÖ½À´Ï´Ù.)°ú \n"
-"¾×¼¼½ºÇÏ·Á´Â ÇÁ¸°ÅÍÀÇ Å¥ À̸§, Á¤½Ä »ç¿ëÀÚ¸í, ¾ÏÈ£¸¦ \n"
-"ÀÔ·ÂÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "ÇÁ¸°ÅÍ ¼­¹ö"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "ÇÁ¸°Æ® Å¥ À̸§"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP ¼­¹ö À̸§À» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP Å¥ À̸§À» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "¼ÒÄÏ ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"¼ÒÄÏ ÇÁ¸°ÅÍ·Î ÀμâÇϱâ À§Çؼ­´Â, ÇÁ¸°ÅÍÀÇ È£½ºÆ®¸í°ú \n"
-"Æ÷Æ® ¹øÈ£(¿É¼Ç)¸¦ ÁöÁ¤ÇØ¾ß ÇÕ´Ï´Ù. HP JetDirect ¼­¹ö»ó¿¡¼­´Â\n"
-"ÀϹÝÀûÀ¸·Î 9100 Æ÷Æ®¸¦ »ç¿ëÇÏÁö¸¸, ´Ù¸¥ ¼­¹ö»ó¿¡¼­´Â °¢±â\n"
-"´Ù¸¦ ¼ö ÀÖ½À´Ï´Ù. Çϵå¿þ¾î ¼³¸í¼­¸¦ ÂüÁ¶Çϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "ÇÁ¸°ÅÍ È£½ºÆ®¸í"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "ÇÁ¸°ÅÍ È£½ºÆ®¸íÀ» ãÀ» ¼ö ¾øÀ½!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "ÇÁ¸°ÅÍ ÀåÄ¡ URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"ÇÁ¸°ÅÍ ¾×¼¼½º ÁÖ¼Ò¸¦ Á÷Á¢ ÁöÁ¤ÇÒ ¼ö ÀÖ½À´Ï´Ù. ÁÖ¼Ò´Â CUPS ¶Ç´Â Foomatic ±ÔÁ¤"
-"À» ÁؼöÇØ¾ß ÇÕ´Ï´Ù. ±×·¸Áö ¾ÊÀº ÁÖ¼Ò´Â ¸ðµç ½ºÇ®·¯°¡ Áö¿øÇÏÁö ¾Ê½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "À¯È¿ÇÑ ÁÖ¼Ò¸¦ ÀÔ·ÂÇϼ¼¿ä!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"¸ðµç ÇÁ¸°ÅÍ´Â À̸§ÀÌ ÀÖ¾î¾ß ÇÕ´Ï´Ù.(¿¹, lp)\n"
-"¼³¸í°ú À§Ä¡ ºÎºÐÀ» ÀÔ·ÂÇÒ ÇÊ¿ä´Â ¾ø½À´Ï´Ù.\n"
-"±×°ÍµéÀº ´ÜÁö »ç¿ëÀÚµéÀ» À§ÇÑ ºÎ¿¬¼³¸íÀÏ »ÓÀÔ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "ÇÁ¸°ÅÍ À̸§"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "¼³¸í"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "À§Ä¡"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅͺ£À̽º Áغñ Áß ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "¿ø°Ý ÇÁ¸°Å͸í"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "ÀÌ°ÍÀÌ ¸Â½À´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "¿ø°Ý ÇÁ¸°Å͸í"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "ÇÁ¸°ÅÍ ¸ðµ¨ ¼±ÅÃ"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "¾î¶² ÇÁ¸°Å͸¦ °¡Áö°í ÀÖ½À´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI À©ÇÁ¸°ÅÍ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "·º½º¸¶Å© À×Å©Á¬ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-#, fuzzy
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"ÇÁ¸°ÅÍ ±âº»°ª ¼³Á¤\n"
-"ÆäÀÌÁö Å©±â¿Í (¸¸¾à À¯È¿ÇÏ´Ù¸é) À×Å© À¯ÇüÀÌ ¿Ã¹Ù¸¥Áö\n"
-"Àß È®ÀÎÇϼ¼¿ä. °íÇ°Áú Àμ⹰À» ¾ò±âÀ§Çؼ­´Â Àμ⠼ӵµ°¡\n"
-"±× ¸¸Å­ ´À·ÁÁø´Ù´Â °ÍÀ» ¾Ë°í °è¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s ¿É¼ÇÀº Á¤¼ö ¹øÈ£À̾î¾ß ÇÕ´Ï´Ù!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s ¿É¼ÇÀº ¼ýÀÚÀ̾î¾ß ÇÕ´Ï´Ù!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s ¿É¼Ç ¹üÀ§ ÃÊ°ú!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"ÀÌ ÇÁ¸°ÅÍ(%s)¸¦\n"
-"±âº» ÇÁ¸°ÅÍ·Î ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "½ÃÇè ÆäÀÌÁö"
-
-#: ../../printerdrake.pm_.c:1583
-#, fuzzy
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"ÀμâÇÒ ½ÃÇè ÆäÀÌÁö¸¦ ¼±ÅÃÇϼ¼¿ä.\n"
-"ÁÖÀÇ: »çÁø ½ÃÇè ÆäÀÌÁö¸¦ ÀμâÇϱâ À§Çؼ­´Â ´Ù¼Ò ½Ã°£ÀÌ °É¸± ¼ö ÀÖ½À´Ï´Ù.\n"
-"±×¸®°í Àú¿ë·®ÀÇ ¸Þ¸ð¸®¸¦ °¡Áø ·¹ÀÌÀú ÇÁ¸°ÅÍ¿¡¼­´Â\n"
-"ÆäÀÌÁö°¡ ³ª¿ÀÁö ¾ÊÀ» ¼öµµ ÀÖ½À´Ï´Ù.\n"
-"Ç¥ÁØ ½ÃÇè ÆäÀÌÁö´Â ´ë°³ Àß ÀμâµË´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "½ÃÇè ÆäÀÌÁö ¾øÀ½"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Àμâ"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Ç¥ÁØ ½ÃÇè ÆäÀÌÁö"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "´Ù¸¥ ½ÃÇè ÆäÀÌÁö (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "½ÃÇè ÆäÀÌÁö È°¼ºÈ­ (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "»çÁø ½ÃÇè ÆäÀÌÁö"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "½ÃÇè ÆäÀÌÁö Àμâ"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "½ÃÇè ÆäÀÌÁö Àμâ Áß..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"½ÃÇè Àμâ ÆäÀÌÁö¸¦ ÇÁ¸°ÅÍ·Î º¸³Â½À´Ï´Ù.\n"
-"ÀμâµÇ±â±îÁö ¾à°£ÀÇ ½Ã°£ÀÌ °É¸± ¼ö ÀÖ½À´Ï´Ù.\n"
-"Àμ⠻óȲ: \n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"½ÃÇè Àμâ ÆäÀÌÁö¸¦ ÇÁ¸°ÅÍ·Î º¸³Â½À´Ï´Ù.\n"
-"ÀμâµÇ±â±îÁö ¾à°£ÀÇ ½Ã°£ÀÌ °É¸± ¼ö ÀÖ½À´Ï´Ù.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "¿Ã¹Ù¸£°Ô ÀÛµ¿Çß½À´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "³¯(RAW) ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"ÇöÀç ÇÁ¸°ÅÍ¿¡ »ç¿ëÇÒ ¼ö ÀÖ´Â ¿É¼Ç ¸ñ·ÏÀ» º¸·Á¸é, ¡¸ÀÎ¼â ¿É¼Ç ¸ñ·Ï¡¹À» ´©¸£¼¼"
-"¿ä.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"¸í·ÉÇà(Å͹̳ΠÀ©µµ¿ì)¿¡¼­ ÆÄÀÏÀ» ÀμâÇÏ·Á¸é, ¡¸%s <ÆÄÀÏ>¡¹¸í·ÉÀ» »ç¿ëÇϼ¼"
-"¿ä.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-#, fuzzy
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"ÇöÀç ÇÁ¸°ÅÍ¿¡ »ç¿ëÇÒ ¼ö ÀÖ´Â ¿É¼Ç ¸ñ·ÏÀ» º¸·Á¸é, ¡¸ÀÎ¼â ¿É¼Ç ¸ñ·Ï¡¹À» ´©¸£¼¼"
-"¿ä.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"¸í·ÉÇà(Å͹̳ΠÀ©µµ¿ì)¿¡¼­ ÆÄÀÏÀ» ÀμâÇÏ·Á¸é, ¡¸%s <ÆÄÀÏ>¡¹ ¶Ç´Â ¡¸%s <ÆÄÀÏ>¡¹"
-"¸í·ÉÀ» »ç¿ëÇϼ¼¿ä.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"¡¸%s¡¹¿Í¡¸%s¡¹¸í·ÉÀº ¶ÇÇÑ Æ¯Á¤ Àμâ ÀÛ¾÷À» À§ÇÑ ¿É¼Ç ¼³Á¤À» ¼öÁ¤ÇÒ ¼ö ÀÖ°Ô ÇÕ"
-"´Ï´Ù. ¸í·ÉÇà¿¡ ¿øÇÏ´Â ¼³Á¤°ªÀ» Ãß°¡Çϼ¼¿ä, ¿¹: ¡¸%s <ÆÄÀÏ>¡¹.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "´Ý±â"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ÇÁ¸°ÅÍ¡¸%s¡¹»ó¿¡¼­ Àμâ Áß"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ÇÁ¸°ÅÍ¡¸%s¡¹»ó¿¡¼­ Àμâ Áß"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "ÇÁ¸°ÅÍ ¿É¼Ç ¸ñ·Ï"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅÍ Àд Áß ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "ÇÁ¸°ÅÍ ¼³Á¤ Àü¼Û"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"½ºÇ®·¯ %s¸¦ À§ÇØ »ç¿ëÇÑ ÇÁ¸°ÅÍ ¼³Á¤À» ÇöÀç ½ºÇ®·¯ÀÎ %s·Î\n"
-"º¹»çÇÒ ¼ö ÀÖ½À´Ï´Ù. ¸ðµç ¼³Á¤ µ¥ÀÌÅÍ(ÇÁ¸°Å͸í, ¼³¸í, À§Ä¡,\n"
-"¿¬°á À¯Çü, ±×¸®°í ±âº» ¿É¼Ç°ªµé)°¡ ³Ñ°ÜÁú °ÍÀÔ´Ï´Ù.\n"
-"±×·¯³ª ÀÛ¾÷µéÀº Àü¼ÛµÇÁö ¾Ê½À´Ï´Ù.\n"
-"´ÙÀ½°ú °°Àº ÀÌÀ¯·ÎÀÎÇÏ¿© ¸ðµç Å¥°¡ Àü¼ÛµÉ ¼ö´Â ¾ø½À´Ï´Ù:\n"
-
-#: ../../printerdrake.pm_.c:1818
-#, fuzzy
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS´Â ³ëº§ ¼­¹ö»óÀÇ ÇÁ¸°Åͳª ÀÚÀ¯Çü½Ä ¸í·É¾î·Î µ¥ÀÌÅ͸¦ º¸³»´Â\n"
-"ÇÁ¸°ÅÍ´Â Áö¿øÇÏÁö ¾Ê½À´Ï´Ù.\n"
-
-#: ../../printerdrake.pm_.c:1820
-#, fuzzy
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"LPQ´Â ´ÜÁö Áö¿ª ÇÁ¸°ÅÍ, ¿ø°Ý LPD ÇÁ¸°ÅÍ ±×¸®°í ¼ÒÄÏ/TCP\n"
-"ÇÁ¸°Å͸¸À» Áö¿øÇÕ´Ï´Ù.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD¿Í LPRng´Â IPP ÇÁ¸°Å͸¦ Áö¿øÇÏÁö ¾Ê½À´Ï´Ù.\n"
-
-#: ../../printerdrake.pm_.c:1824
-#, fuzzy
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"±×¸®°í ¶ÇÇÑ, ÀÌ ÇÁ·Î±×·¥À̳ª ¡¸Foomatic ¼³Á¤¡¹À¸·Î\n"
-"»ý¼ºµÇÁö ¾ÊÀº Å¥´Â Àü¼ÛµÉ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1825
-#, fuzzy
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"¶ÇÇÑ Á¦Á¶¾÷ü°¡ Á¦°øÇÑ PPD ÆÄÀÏÀ̳ª CUPS Æ÷ÇÔ µå¶óÀ̹ö·Î\n"
-"¼³Á¤µÈ ÇÁ¸°Å͵µ Àü¼ÛµÉ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Àü¼ÛÇÏ·Á´Â ÇÁ¸°Å͵éÀ» ¼±ÅÃÇÑ ÈÄ¿¡ ¡¸Àü¼Û¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "ÇÁ¸°ÅÍ Àü¼Û ÇÏÁö¾ÊÀ½"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Àü¼Û"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"ÇÁ¸°ÅÍ ¡¸%s¡¹°¡ ÀÌ¹Ì %sÇÏ¿¡ Á¸ÀçÇÔ´Ï´Ù.\n"
-"µ¤¾î ¾µ·Á¸é ¡¸Àü¼Û¡¹À» ´©¸£¼¼¿ä.\n"
-"»õ À̸§À» ÀÔ·ÂÇϰųª ÀÌ ÇÁ¸°Å͸¦ Áö³ªÄ¥ ¼öµµ ÀÖ½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "ÇÁ¸°ÅÍ À̸§¿¡´Â ¹®ÀÚ, ¼ýÀÚ ±×¸®°í ¹ØÁÙ(Underscore)¸¸ ÀÖ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"ÇÁ¸°ÅÍ ¡¸%s¡¹°¡ ÀÌ¹Ì Á¸ÀçÇÕ´Ï´Ù.\n"
-"Á¤¸»·Î ±âÁ¸ ¼³Á¤À» µ¤¾î ¾µ±î¿ä?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "»õ ÇÁ¸°ÅÍ À̸§"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s Àü¼Û Áß ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, fuzzy, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"ÀÌÀü ±âº» ÇÁ¸°ÅÍ(¡¸%s¡¹)¸¦ Àü¼ÛÇÏ¿´½À´Ï´Ù.\n"
-"»õ ÇÁ¸°Æà ½Ã½ºÅÛ %sÇÏ¿¡¼­ ±×°ÍÀÌ ¶ÇÇÑ ±âº» ÇÁ¸°ÅÍ°¡\n"
-"µÇµµ·Ï ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "ÇÁ¸°ÅÍ µ¥ÀÌÅÍ °»½Å Áß ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "¿ø°Ý ÇÁ¸°ÅÍ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "³×Æ®¿÷ ¿¬°á Áß..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Áö±Ý ³×Æ®¿÷ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "³×Æ®¿÷ ±â´ÉÀÌ ¼³Á¤µÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:1932
-#, fuzzy
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"¿ø°Ý ÇÁ¸°Å͸¦ ¼³Á¤ÇÏ·Á ÇÕ´Ï´Ù. ±×·¯±â À§Çؼ­´Â ³×Æ®¿÷ÀÌ\n"
-"µ¿ÀÛÇÏ°í ÀÖ¾î¾ß Çϴµ¥, ¾ÆÁ÷ ³×Æ®¿÷ ¼³Á¤ÀÌ µÇ¾î ÀÖÁö ¾Ê½À´Ï´Ù.\n"
-"³×Æ®¿÷ ¼³Á¤¾øÀÌ °è¼Ó ÁøÇàÇϸé, Áö±Ý ¼³Á¤ÇÏ°í ÀÖ´Â ÇÁ¸°Å͸¦\n"
-"»ç¿ëÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"¾î¶»°Ô ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "³×Æ®¿÷ ¼³Á¤ ¾øÀÌ °è¼Ó"
-
-#: ../../printerdrake.pm_.c:1968
-#, fuzzy
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"¼³Ä¡°úÁ¤¿¡¼­ ¼³Á¤ÇÑ ³×Æ®¿÷À» ½ÃÀÛÇÒ ¼ö ¾ø½À´Ï´Ù.\n"
-"½Ã½ºÅÛÀÌ ºÎÆÃµÉ ¶§, ³×Æ®¿÷ÀÌ ÀÚµ¿ ½ÇÇàµÇµµ·Ï µÇ¾î ÀÖ´ÂÁö\n"
-"È®ÀÎÇÏ°í, ¸Çµå·¹ÀÌÅ© Á¦¾î ¼¾ÅÍ(¡¸³×Æ®¿÷°ú ÀÎÅͳݡ¹->¡¸¿¬°á¡¹)\n"
-"¸¦ ÀÌ¿ëÇÏ¿© ¿Ã¹Ù¸£°Ô ¼³Á¤Çϼ¼¿ä.±×¸®°í³ª¼­ ´Ù½Ã ¸Çµå·¹ÀÌÅ© Á¦¾î ¼¾ÅÍ(¡¸Çϵå¿þ"
-"¾î¡¹->¡¸ÇÁ¸°ÅÍ¡¹)\n"
-"¸¦ ÀÌ¿ëÇÏ¿©, ÇÁ¸°ÅÍ ¼³Á¤À»\n"
-"´Ù½Ã ÇØ º¸¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1969
-#, fuzzy
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"³×Æ®¿÷ Á¢±ÙÀÌ ºÒ°¡´ÉÇßÀ¸¸ç, ½ÃÀÛÇÒ ¼öµµ ¾ø¾ú½À´Ï´Ù.\n"
-"³×Æ®¿÷ ¼³Á¤°ú Çϵå¿þ¾î¸¦ Á¡°ËÇØ ÁÖ¼¼¿ä.\n"
-"±×¸®°í³ª¼­ ¿ø°Ý ÇÁ¸°ÅÍ ¼³Á¤À» ´Ù½Ã ½ÃµµÇØ\n"
-"º¸¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Àμ⠽ýºÅÛ Àç½ÇÇà Áß ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "³ôÀ½"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "ÃÖ°í"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "º¸¾È ¼öÁØ %s·Î Àμ⠽ýºÅÛ ¼³Ä¡ Áß"
-
-# #msgid ""
-# #"You are about to install the printing system %s on a system running in the %"
-# #"s security level.\n"
-# #"\n"
-# #"This printing system runs a daemon (background process) which waits for "
-# #"print jobs and handles them. This daemon is also accessable by remote "
-# #"machines through the network and so it is a possible point for attacks. "
-# #"Therefore only a few selected daemons are started by default in this "
-# #"security level.\n"
-# #"\n"
-# #"Do you really want to configure printing on this machine?"
-# #msgstr ""
-# #"Áö±Ý ´ÔÀº º¸¾È¼öÁØ %2%s·Î ¿î¿ëµÇ´Â ½Ã½ºÅÛ¿¡\n"
-# #"Àμ⠽ýºÅÛ %1$sÀ» ¼³Ä¡ÇÏ·Á°í ÇÕ´Ï´Ù.\n"
-# #"\n"
-# #"Àμ⠽ýºÅÛÀº ÀμâÀÛ¾÷À» ±â´Ù·È´Ù°¡ ó¸®ÇÏ´Â\n"
-# #"´ë¸ó(¹é±×¶ó¿îµå ÇÁ·Î¼¼½º)¸¦ ½ÇÇà½Ãŵ´Ï´Ù.\n"
-# #"¿ø°Ý ½Ã½ºÅÛ¿¡¼­ ³×Æ®¿÷À¸·Î ÀÌ ´ë¸ó¿¡ Á¢±ÙÇÒ ¼öµµ\n"
-# #"Àֱ⠶§¹®¿¡, Å©·¡Ä¿µéÀÇ »ç³É°¨ÀÌ µÇ±âµµ ÇÕ´Ï´Ù.\n"
-# #"µû¶ó¼­ ÇöÀç º¸¾È ¼öÁØ¿¡¼­´Â ´ÜÁö ¸î¸îÀÇ ¸Å¸óµé¸¸\n"
-# #"½ÇÇàµÇµµ·Ï ¼±ÅõǴ °ÍÀÌ ±âº»ÀÔ´Ï´Ù.\n"
-# #"\n"
-# #"Á¤¸»·Î ÀÌ ÄÄÇ»ÅÍ»óÀÇ Àμ⠼³Á¤À»\n"
-# #"¿øÇϽʴϱî? "
-#: ../../printerdrake.pm_.c:2019
-#, fuzzy, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Áö±Ý ´ÔÀº º¸¾È¼öÁØ %2%s·Î ¿î¿ëµÇ´Â ½Ã½ºÅÛ¿¡\n"
-"Àμ⠽ýºÅÛ %1$sÀ» ¼³Ä¡ÇÏ·Á°í ÇÕ´Ï´Ù.\n"
-"\n"
-"Àμ⠽ýºÅÛÀº ÀμâÀÛ¾÷À» ±â´Ù·È´Ù°¡ ó¸®ÇÏ´Â\n"
-"´ë¸ó(¹é±×¶ó¿îµå ÇÁ·Î¼¼½º)¸¦ ½ÇÇà½Ãŵ´Ï´Ù.\n"
-"¿ø°Ý ½Ã½ºÅÛ¿¡¼­ ³×Æ®¿÷À¸·Î ÀÌ ´ë¸ó¿¡ Á¢±ÙÇÒ ¼öµµ\n"
-"Àֱ⠶§¹®¿¡, Å©·¡Ä¿µéÀÇ »ç³É°¨ÀÌ µÇ±âµµ ÇÕ´Ï´Ù.\n"
-"µû¶ó¼­ ÇöÀç º¸¾È ¼öÁØ¿¡¼­´Â ´ÜÁö ¸î¸îÀÇ ¸Å¸óµé¸¸\n"
-"½ÇÇàµÇµµ·Ï ¼±ÅõǴ °ÍÀÌ ±âº»ÀÔ´Ï´Ù.\n"
-"\n"
-"Á¤¸»·Î ÀÌ ÄÄÇ»ÅÍ»óÀÇ Àμ⠼³Á¤À»\n"
-"¿øÇϽʴϱî? "
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "ºÎÆýà Àμ⠽ýºÅÛ ÀÚµ¿½ÇÇà"
-
-#: ../../printerdrake.pm_.c:2052
-#, fuzzy, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Àμ⠽ýºÅÛ(%s)´Â ÄÄÇ»ÅÍ°¡ ºÎÆÃÇÒ ¶§ ÀÚµ¿À¸·Î ½ÇÇàµÇÁö\n"
-"¾ÊÀ» °ÍÀÔ´Ï´Ù.\n"
-"\n"
-"Àμ⠽ýºÅÛÀº Å©·¡Ä¿µéÀÇ ÀáÀçÀûÀÎ °ø°Ý¸ñÇ¥À̱⠶§¹®¿¡,\n"
-"º¸¾È ¼öÁØÀ» ³ô°Ô ÇÏ¿´À» ½Ã¿¡´Â ÀÚµ¿½ÇÇà ±â´ÉÀÌ ÇØÁ¦µÉ\n"
-"¼öµµ ÀÖµµ·Ï µÇ¾î ÀÖ½À´Ï´Ù.\n"
-"\n"
-"´Ù½Ã Àμ⠽ýºÅÛÀÇ ÀÚµ¿½ÇÇà ±â´ÉÀÌ È°¼ºÈ­µÇµµ·Ï\n"
-"ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "¼³Ä¡µÈ ¼ÒÇÁÆ®¿þ¾î È®ÀÎ Áß ..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng Á¦°Å Áß ..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD Á¦°Å Áß ..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "ÇÁ¸°ÅÍ ½ºÇ®·¯À» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "¾î¶² Àμ⠽ýºÅÛ(½ºÇ®·¯)À» »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "ÇÁ¸°ÅÍ ¡¸%s¡¹ ¼³Á¤ Áß ..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "ÆÑÅ°Áö ¼³Ä¡ Áß..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "ÇÁ¸°ÅÍ ¿É¼Ç"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "ÇÁ¸°Å͵巹ÀÌÅ© Áغñ Áß ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "ÇÁ¸°ÅÍ ¡¸%s¡¹ ¼³Á¤ Áß ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Àμ⠼³Á¤À» ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Àμ⠽ýºÅÛ:"
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"´ÙÀ½ ÇÁ¸°Å͵éÀÌ ¼³Á¤µÇ¾ú½À´Ï´Ù.\n"
-"¼öÁ¤ÇÏ°í ½Í°Å³ª,\n"
-"Á¤º¸¸¦ º¸°í ½Í´Ù¸é ÇÁ¸°Å͸¦ Ŭ¸¯Çϼ¼¿ä.\n"
-"»õ ÇÁ¸°Å͸¦ Ãß°¡ÇÏ°í ½Í´Ù¸é ¡¸ÇÁ¸°ÅÍ Ãß°¡¡¹¸¦ ´©¸£¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"´ÙÀ½ ÇÁ¸°Å͵éÀÌ ¼³Á¤µÇ¾ú½À´Ï´Ù.\n"
-"¼öÁ¤ÇÏ°í ½Í°Å³ª,\n"
-"Á¤º¸¸¦ º¸°í ½Í´Ù¸é ÇÁ¸°Å͸¦ Ŭ¸¯Çϼ¼¿ä.\n"
-"»õ ÇÁ¸°Å͸¦ Ãß°¡ÇÏ°í ½Í´Ù¸é ¡¸ÇÁ¸°ÅÍ Ãß°¡¡¹¸¦ ´©¸£¼¼¿ä."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "³×Æ®¿÷ ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "ÀÏ¹Ý ¸ðµå"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "¶Ç´Ù¸¥ ÇÁ¸°Å͸¦ ¼³Á¤ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "ÀÎÅÍ³Ý ¼³Á¤ º¯°æ"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"ÇÁ¸°ÅÍ %s: %s: %s\n"
-"ÀÌ ÇÁ¸°ÅÍ¿¡ ´ëÇؼ­ ¹«¾ùÀ» ¼öÁ¤ÇϽðڽÀ´Ï±î?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "½ÇÇà"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "ÀÎÅÍ³Ý ¿¬°á À¯Çü"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "ÇÁ¸°ÅÍ À̸§, ¼³¸í, À§Ä¡"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "ÇÁ¸°ÅÍ Á¦Á¶¾÷ü, ¸ðµ¨, µå¶óÀ̹ö"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "ÇÁ¸°ÅÍ Á¦Á¶¾÷ü, ¸ðµ¨"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "ÀÌ ÇÁ¸°Å͸¦ ±âº»À¸·Î ¼³Á¤"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "½ÃÇè ÆäÀÌÁö Àμâ"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "ÀÌ ÇÁ¸°ÅÍÀÇ Àμâ¹ý ¾Ë±â"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "ÇÁ¸°ÅÍ Á¦°Å"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "±âÁ¸ ÇÁ¸°ÅÍ ¡¸%s¡¹ Á¦°Å Áß ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "±âº» ÇÁ¸°ÅÍ"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "¡¸%s¡¹ÇÁ¸°ÅÍ°¡ ±âº» ÇÁ¸°ÅÍ·Î ¼³Á¤µÇ¾ú½À´Ï´Ù."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Á¤¸»·Î ¡¸%s¡¹ÇÁ¸°Å͸¦ Á¦°ÅÇմϱî?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ÇÁ¸°ÅÍ ¡¸%s¡¹ Á¦°Å Áß ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "ÇÁ¶ô½Ã ¼³Á¤"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"ÇÁ¶ô½Ã ¼³Á¤ µµ±¸¿¡ Àß ¿À¼Ì½À´Ï´Ù.\n"
-"\n"
-"¿©±â¼­ ·Î±×Àΰú ºñ¹Ð¹øÈ£¸¦ ÇÊ¿ä ¶Ç´Â ÇÊ¿ä·ÎÇÏÁö ¾Ê´Â\n"
-"HTTP¿Í FTP ÇÁ¶ô½Ã¸¦ ¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"HTTP ÇÁ¶ô½Ã Á¤º¸¸¦ ÀÔ·ÂÇϼ¼¿ä.\n"
-"HTTP ÇÁ¶ô½Ã°¡ ÇÊ¿ä ¾ø´Ù¸é, °ø¶õÀ¸·Î µÎ¼¼¿ä."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "ÁÖ¼Ò"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Æ÷Æ®"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "ÁÖ¼Ò´Â ¡¸http:¡¹·Î ½ÃÀÛÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Æ÷Æ® ºÎºÐÀº ¼ýÀÚÀ̾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"FTP ÇÁ¶ô½Ã Á¤º¸¸¦ ÀÔ·ÂÇϼ¼¿ä.\n"
-"FTP ÇÁ¶ô½Ã°¡ ÇÊ¿ä¾ø´Ù¸é, °ø¶õÀ¸·Î µÎ¼¼¿ä."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "ÁÖ¼Ò´Â ¡¸ftp:¡¹·Î ½ÃÀÛÇØ¾ß ÇÕ´Ï´Ù."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"ÇÁ¶ô½Ã ·Î±×Àΰú ºñ¹Ð¹øÈ£¸¦ ÀÔ·ÂÇϼ¼¿ä.\n"
-"·Î±×Àΰú ºñ¹Ð¹øÈ£°¡ ÇÊ¿äÄ¡ ¾Ê´Ù¸é, °ø¶õÀ¸·Î µÎ¼¼¿ä."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "·Î±×ÀÎ"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ºñ¹Ð¹øÈ£"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ºñ¹Ð¹øÈ£ È®ÀÎ"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "ºñ¹Ð¹øÈ£°¡ ÀÏÄ¡ÇÏÁö ¾Ê½À´Ï´Ù. ´Ù½Ã ÀÔ·ÂÇϼ¼¿ä!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Æ÷¸ËµÈ RAID md%d¿¡ ÆÄƼ¼ÇÀ» Ãß°¡ÇÒ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s ÆÄÀÏ¿¡ ¾µ ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ½ÇÆÐ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ½ÇÆÐ (raidtoolÀÌ ¼³Ä¡µÇ¾î ÀÖÁö ¾ÊÀ» ¼ö ÀÖ½À´Ï´Ù.)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "RAID ·¹º§ %d¸¦ À§ÇÑ ÆÄƼ¼ÇµéÀÌ ÃæºÐÇÏÁö ¾Ê½À´Ï´Ù.\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (Áøº¸µÈ ¸®´ª½º »ç¿îµå ¾ÆÅ°ÅØó) »ç¿îµå ½Ã½ºÅÛ ½ÇÇà"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "AnancronÀº ÁÖ±âÀûÀÎ ¸í·É ½ºÄÉÁì·¯ ÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd´Â ¹èÅ͸® »óÅÂ¿Í syslog¸¦ °ÅÃļ­ ·Î±× ±â·ÏÀ» °¨½ÃÇϴµ¥ »ç¿ëµË´Ï´Ù.\n"
-"¶ÇÇÑ ¹èÅ͸®·®ÀÌ ¹Ì¾àÇÒ¶§ ÀÚµ¿À¸·Î ½Ã½ºÅÛÀ» ¼Ë´Ù¿î ½ÃÄÑÁÖ´Â ±â´Éµµ ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Á¤ÇØÁØ ½Ã°£¿¡ Çѹø¿¡ Çϳª¾¿ ½ÇÇà½Ãŵ´Ï´Ù. at´Â batch ¸í·ÉµéÀ» ½Ã½ºÅÛ\n"
-"·ÎµåÀ²ÀÌ ³·À»¶§ ¼öÇà½Ãŵ´Ï´Ù."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cronÀº »ç¿ëÀÚ°¡ ÁöÁ¤ÇÑ ÇÁ·Î±×·¥À» ÁÖ±âÀûÀ¸·Î ƯÁ¤ ½Ã°£¿¡ ½ÇÇà½ÃÅ°´Â \n"
-"Ç¥ÁØ UNIX ÇÁ·Î±×·¥ÀÔ´Ï´Ù. vixie cronÀº ÀÌ ±âº» UNIX Cron¿¡ Çâ»óµÈ º¸¾È°ú \n"
-"´õ °­·ÂÇÑ ¼³Á¤¿É¼Ç µîÀÇ ¸¹Àº Ư¡À» Ãß°¡ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPMÀº ÅؽºÆ® ±â¹Ý ÇÁ·Î±×·¥µé¿¡°Ô ¸¶¿ì½º ±â´ÉÀ» Áö¿øÇÕ´Ï´Ù.\n"
-"¶ÇÇÑ ÄÜ¼Ö È­¸é¿¡¼­ Àß¶ó¼­ ºÙÀ̱â¿Í Æ˾÷ ¸Þ´º ±â´ÉÀ» \n"
-"Áö¿øÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Çϵåµå·¹ÀÌÅ©´Â Çϵå¿þ¾î °Ë»öÀ» ¼öÇàÇϸç, ÇÊ¿äÇÏ´Ù¸é\n"
-"»õ/º¯°æµÈ Çϵå¿þ¾î¸¦ ¼³Á¤ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"¾ÆÆÄÄ¡(Apache)´Â À¥ ¼­¹öÀÔ´Ï´Ù. ÀÌ°ÍÀº HTMLÀ̳ª CGI ÆÄÀÏ ¼­ºñ½º¸¦\n"
-"Çϴµ¥ »ç¿ëµË´Ï´Ù."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"(Åë»óÀûÀ¸·Î inetd¶ó°í ÇÏ´Â) ÀÎÅÍ³Ý ¼öÆÛ ´ë¸óÀº ´Ù¾çÇÑ ÀÎÅÍ³Ý ¼­¹ö¸¦\n"
-"ÇÊ¿äÇÑ ¶§ ½ÇÇà ½Ãŵ´Ï´Ù. ÅÚ³Ý, FTP, RSH, RLOGIN µî°ú °°Àº ¸¹Àº \n"
-"¼­ºñ½º¸¦ °ü¸®ÇÕ´Ï´Ù. ÀÌ°ÍÀÌ ½ÇÇàµÇ¾î ÀÖÁö ¾ÊÀ¸¸é, ¶ÇÇÑ ÀÌ°ÍÀÌ °ü¸®ÇÏ´Â\n"
-"¿©·¯ ¼­ºñ½ºµµ ¶ÇÇÑ ºÒ°¡´ÉÇÏ°Ô µË´Ï´Ù."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"2.2 Ä¿³Î ½Ã¸®Áî¿ë ÆÐŶ ÇÊÅ͸¦ ½ÇÇà, ³×Æ®¿÷ °ø°ÝÀ¸·ÎºÎÅÍ\n"
-"ÄÄÇ»Å͸¦ º¸È£ÇÏ´Â ¹æÈ­º®À» ±¸ÃàÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"ÀÌ ÆÑÅ°Áö´Â ¡¸/etc/sysconfig/keyboard¡¹¿¡ ¼³Á¤µÇ¾î ÀÖ´Â \n"
-"Å°º¸µå ¸ÊÀ» ÀûÀçÇÕ´Ï´Ù. Å°º¸µå´Â ¡¸kbdconfig¡¹¸í·ÉÀ¸·Î ¼±ÅÃÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-"´ëºÎºÐÀÇ ½Ã½ºÅÛ¿¡¼­ ÇÊ¿äÇÑ °ÍÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"¡¸/usr/include/linux/{autoconf,version}.h¡¹¿¡ ´ëÇØ\n"
-"¡¸/boot¡¹¿¡ Ä¿³Î Çì´õ¸¦ ÀÚµ¿ »ý¼º."
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "ºÎÆýÿ¡ ÀÚµ¿ Çϵå¿þ¾î °Ë»ö ¹× ¼³Á¤."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"¸®´ª½º ¼³Á¤(Linuxconf)Àº ½Ã½ºÅÛ ¼³Á¤À» À¯ÁöÇϱâ À§ÇÏ¿©\n"
-"ºÎÆýÿ¡ ´Ù¾çÇÑ ÀÛ¾÷ ¼öÇàÀ» ÁغñÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"LPD´Â lpr ¸í·ÉÀÌ ¿Ã¹Ù¸£°Ô ÀÛµ¿Çϱâ À§ÇØ ÇÊ¿äÇÑ Àμ⠴ë¸óÀÔ´Ï´Ù.\n"
-"±Ùº»ÀûÀ¸·Î Àμâ ÀÛ¾÷µéÀ» ÇÁ¸°ÅÍ·Î ÁßÀçÇØ ÁÖ´Â ¼­¹öÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"¸®´ª½º °¡»ó ¼­¹ö, °í¼º´É ¼­¹ö ±¸Ãà¿¡\n"
-"»ç¿ëµË´Ï´Ù."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"NAMED(BIND)´Â È£½ºÆ® À̸§À¸·Î IP ÁÖ¼Ò¸¦ ã¾Æ³»´Âµ¥ »ç¿ëµÇ´Â\n"
-"µµ¸ÞÀÎ ³×ÀÓ ¼­¹öÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"³×Æ®¿÷ ÆÄÀÏ ½Ã½ºÅÛ(NFS), »ï¹Ù(SMB/·£ °ü¸®ÀÚ/À©µµ¿ìÁî), ±×¸®°í\n"
-"NCP(³Ý¿þ¾î)¸¦ ¸¶¿îÆ®ÇÏ°í ¾ð¸¶¿îÆ®ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"ºÎÆýÿ¡ ½ÃÀÛÇϵµ·Ï ¼³Á¤µÈ ¸ðµç ³×Æ®¿÷ ÀÎÅ×ÆäÀ̽º¸¦ \n"
-"È°¼ºÈ­/ºñÈ°¼ºÈ­ ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS´Â TCP/IP ³×Æ®¿÷À¸·Î ÆÄÀÏÀ» °øÀ¯ÇÏ´Â ÀαâÀÖ´Â ÇÁ·ÎÅäÄÝÀÔ´Ï´Ù.\n"
-"ÀÌ ¼­ºñ½º´Â /etc/export ÆÄÀÏÀ» ¼³Á¤ÇÔÀ¸·Î½á NFS ¼­¹öÀÇ ±â´ÉÀ» °¡´ÉÇÏ°Ô\n"
-"ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS´Â TCP/IP ³×Æ®¿÷À¸·Î ÆÄÀÏÀ» °øÀ¯ÇÏ´Â ÀαâÀÖ´Â ÇÁ·ÎÅäÄÝÀÔ´Ï´Ù.\n"
-"ÀÌ ¼­ºñ½º´Â NFS ÆÄÀÏ Àá±Ý ±â´ÉÀ» Á¦°øÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"ºÎÆýÿ¡ ÀÚµ¿À¸·Î Äְܼú X ȯ°æ¿¡¼­\n"
-"¼ýÀÚÅ° Àá±Ý ¸ðµå »ç¿ë."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w ¹× ȣȯ ÇÁ¸°ÅÍ Áö¿ø."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA´Â º¸Åë ·¦Å¾(³ëÆ®ºÏ)¿¡ ÀÖ´Â ÀÌ´õ³Ý Ä«µå¿Í ¸ðµ©°°Àº ÀåÄ¡\n"
-"µéÀ» Áö¿øÇϱâ À§ÇÑ °ÍÀÔ´Ï´Ù. Ãß°¡ ¼³Á¤ÀÌ ¾øÀ¸¸é ½ÃÀÛµÇÁö ¾Ê±â ¶§¹®¿¡,\n"
-"ÀÌ·¯ÇÑ ÀåÄ¡°¡ ¾ø´Â ÄÄÇ»ÅÍ¿¡ ¼³Ä¡µÇ¾î À־ ¾ÈÀüÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Æ÷Æ®¸ÊÆÛ(portmapper)´Â NFS¿Í NIS °°Àº ÇÁ·ÎÅäÄÝ¿¡ ÀÇÇØ »ç¿ëµÇ´Â\n"
-"RPC ¿¬°áÀ» °ü¸®ÇÕ´Ï´Ù. Æ÷Æ®¸Ê ¼­¹ö´Â RPC ¸ÞÄ¿´ÏÁòÀ» ÀÌ¿ëÇÏ´Â ÇÁ·ÎÅäÄÝ¿ë ¼­¹ö"
-"·Î\n"
-"»ç¿ëµÇ°í ÀÖ´Â ÄÄÇ»ÅÍ¿¡´Â ¹Ýµå½Ã ½ÇÇàµÇ°í ÀÖ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Æ÷½ºÆ®ÇȽº(Postfix)´Â ÄÄÇ»Åäµé°£¿¡ ¸ÞÀÏÀ» ÁÖ°í¹Þ´Â \n"
-"¸ÞÀÏ Àü¼Û ¿¡ÀÌÀüÆ®ÀÔ´Ï´Ù."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"°íÇ°ÁúÀÇ ³­¼ö »ý¼ºÀ» À§ÇØ ½Ã½ºÅÛ ¿£Æ®·ÎÇÇ Ç®À» ÀúÀåÇÏ°í \n"
-"º¹±¸ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"¿À¶óŬ °°Àº ÇÁ·Î±×·¥À» »ç¿ëÇϱâ À§ÇØ ³¯(RAW) ÀåÄ¡¸¦\n"
-"(Çϵåµð½ºÅ© ÆÄƼ¼Ç °°Àº) ºí·Ï ÀåÄ¡·Î ÇÒ´ç."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed µ¥¸óÀº RIP ÇÁ·ÎÅäÄÝÀ» ÅëÇØ ÀÚµ¿À¸·Î IP ¶ó¿ìÅÍ Å×À̺íÀÌ °»½ÅµÇµµ·Ï ÇÕ´Ï"
-"´Ù.\n"
-"RIP´Â ¼Ò±Ô¸ð ³×Æ®¿÷À» À§ÇÑ °ÍÀ̱⠶§¹®¿¡, ´ë±Ô¸ð ³×Æ®¿÷À» À§Çؼ­´Â º¸´Ù º¹Àâ"
-"ÇÑ\n"
-"¶ó¿ìÆà ÇÁ·ÎÅäÄÝÀÌ ÇÊ¿äÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ÇÁ·ÎÅäÄÝÀº ³×Æ®¿÷»óÀÇ »ç¿ëÀÚ°¡ ±¸ ³×Æ®¿ö»ó¿¡ ÀÖ´Â \n"
-"¸ðµç ÄÄÇ»ÅÍ¿¡ ´ëÇÏ¿© ¼öÇà´É·Â ¸ÞÆ®¸¯½º¸¦ ¾Ë¾Æ º¼ ¼ö ÀÖ°Ô ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ÇÁ·ÎÅäÄÝÀº ³×Æ®¿÷»óÀÇ »ç¿ëÀÚµéÀÌ ´Ù¸¥ ÄÄÇ»ÅÍ»ó¿¡ ·Î±×ÀÎÇÑ \n"
-"»ç¿ëÀÚµéÀÇ ½Å¿øÀ» ¾Ë ¼ö ÀÖ°Ô ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ÇÁ·ÎÅäÄÝÀº (finger¿Í ºñ½ÁÇÏ°Ô) rwho ´ë¸óÀÌ ½ÇÇàµÇ°í\n"
-"ÀÖ´Â ÄÄÇ»ÅÍ¿¡ ·Î±×ÀÎÇÑ »ç¿ëÀÚ ¸ñ·ÏÀ» ¿ø°Ý »ç¿ëÀÚ°¡ º¼ ¼ö ÀÖ°Ô ÇÕ´Ï´Ù."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "ÀÌ ÄÄÇ»ÅÍ¿¡¼­ »ç¿îµå ½Ã½ºÅÛ ½ÇÇà"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog´Â ¿©·¯ µ¥¸óµéÀÇ ·Î±× ¸Þ¼¼Áö¸¦ ¿©·¯ Á¾·ùÀÇ ½Ã½ºÅÛ ·Î±× ÆÄÀÏ·Î\n"
-"³²±â´Âµ¥ À¯¿ëÇÕ´Ï´Ù. Ç×»ó Syslog¸¦ ½ÇÇà½ÃÅ°´Â°ÍÀÌ ÁÁ½À´Ï´Ù."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "USB ÀåÄ¡¿ë µå¶óÀ̹ö ÀûÀç."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X ÆùÆ® ¼­¹ö ½ÃÀÛ (X À©µµ¿ì¸¦ ¿î¿µÇϱâ À§Çؼ­´Â ÇʼöÀÔ´Ï´Ù)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "¾î¶² ¼­ºñ½º°¡ ºÎÆýÿ¡ ÀÚµ¿ ½ÇÇàµÇ¾î¾ß ÇÒÁö ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Àμâ"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "ÀÎÅͳÝ"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "ÆÄÀÏ °øÀ¯"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "½Ã½ºÅÛ"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "¿ø°Ý °ü¸®"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "µ¥ÀÌÅͺ£À̽º ¼­¹ö"
-
-# #msgid "Services: %d activated for %d registered"
-# #msgstr "¼­ºñ½º: µî·ÏµÈ %2$d Áß %1$d È°¼ºÈ­µÊ"
-#: ../../services.pm_.c:170
-#, fuzzy, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "¼­ºñ½º: µî·ÏµÈ %2$d Áß %1$d È°¼ºÈ­µÊ"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "¼­ºñ½º"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "½ÇÇàÁß"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "Á¤ÁöµÊ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "¼­ºñ½º¿Í ´ë¸ó"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Á˼ÛÇÕ´Ï´Ù.\n"
-"ÀÌ ¼­ºñ½º¿¡ ´ëÇÑ Ãß°¡Á¤º¸°¡ ¾ø½À´Ï´Ù."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "ÀÚµ¿½ÇÇà"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "»óÅÂ:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "¼½ÅÍ"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "´Ù¸¥ Áö¿ªÀ» À§ÇÑ ÇÁ·ÎÅäÄÝ"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "ÀÎÅÍ³Ý ¾×¼¼½º"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "¸ÖƼ¹Ìµð¾î - ±×·¡ÇÈ"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "°³¹ß"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "ÄÁÆ®·Ñ ¼¾ÅÍ"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "³×Æ®¿÷ ÀÎÅÍÆäÀ̽º"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB ¼­¹ö È£½ºÆ®"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "°ÔÀÓ"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Àü¹®°¡"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "ÆÑÅ°Áö ¼³Ä¡ Áß..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"ÇÏµå µð½ºÅ©ÀÇ ÆÄƼ¼Ç Å×À̺íÀ» ÀÐÀ»¼ö ¾ø½À´Ï´Ù. ³Ê¹« º¯ÇüµÈ °Í °°½À´Ï´Ù. :(\n"
-"À߸øµÈ ÆÄƼ¼Ç ºñ¿ì±â¸¦ ½ÃµµÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "¿À·ù!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "ÇÊ¿äÇÑ À̹ÌÁö ÆÄÀÏ %s¸¦ ãÀ» ¼ö ¾ø½À´Ï´Ù."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "ÀÚµ¿ ¼³Ä¡ ¼³Á¤±â"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"ÀÌÁ¦ ÀÚµ¿ ¼³Ä¡ Ç÷ÎÇǸ¦ ¸¸µé °ÍÀÔ´Ï´Ù. ÀÌ°ÍÀº ´Ù¼Ò À§ÇèÇÑ ÀÛ¾÷ÀÌ µÉ ¼ö ÀÖÀ¸"
-"¸ç, ½ÅÁßÇÏ°Ô »ç¿ëµÇ¾îÁ®¾ß ÇÕ´Ï´Ù.\n"
-"\n"
-"ÀÌ°ÍÀÇ Æ¯Â¡Àº, ÀϺΠ°ªÀ» º¯°æÇϱâ À§ÇÏ¿© ÀϺΠ°úÁ¤¿¡¼­ ´ëÈ­¸ðµå°¡ ³ªÅ¸³ª±â´Â "
-"ÇÏÁö¸¸, ±âº»ÀûÀ¸·Î ÀÌ ÄÄÇ»ÅÍ¿¡¼­ ¼öÇàÇÑ ¼³Ä¡ÀÛ¾÷À» ÀÚµ¿¹Ýº¹ÇÏ°Ô ÇÕ´Ï´Ù.\n"
-"\n"
-"¾ÈÀü»óÀÇ ÀÌÀ¯·Î, ÀÌ ÄÄÇ»Åͻ󿡼­ÀÇ ¼³Ä¡°úÁ¤°ú´Â »ó°ü¾øÀÌ, ÆÄƼ¼Ç ³ª´©±â¿Í Æ÷"
-"¸ËÇϱâ´Â ÀÚµ¿À¸·Î ÀÌ·ç¾îÁöÁö ¾Ê½À´Ï´Ù.\n"
-"\n"
-"°è¼Ó ÁøÇàÇմϱî?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "ÀÚµ¿ °úÁ¤ ¼³Á¤±â"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr "°¢ °úÁ¤¿¡ ´ëÇÏ¿© ¼öµ¿¼³Ä¡¿Í ÀÚµ¿¹Ýº¹¼³Ä¡¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "ÃàÇÏÇÕ´Ï´Ù!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Ç÷ÎÇÇ°¡ ¼º°øÀûÀ¸·Î »ý¼ºµÇ¾ú½À´Ï´Ù.\n"
-"ÀÌÁ¨ ¼³Ä¡°úÁ¤¸¦ ¹Ýº¹ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "¼³Ä¡"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "»ç¿ëÀÚ Ãß°¡"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "·çÇÁ¹é ÆÄÀÏÀ» Á¦°ÅÇմϱî?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Ç׸ñ Á¦°Å"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "À©µµ¿ìÁî(TM) Á¦°Å"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "»ç¿ëÀÚ¸í"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "¸¶¿ì½º¸¦ Å×½ºÆ®Çϼ¼¿ä."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "´Ù½Ã ½ÃµµÇϼ¼¿ä."
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "´Ù½Ã ½ÃµµÇϼ¼¿ä."
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "ºñ¹Ð¹øÈ£ È®ÀÎ"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN ¿¬°á"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "ÇÁ¸°ÅÍ ¿¬°á¹æ¹ýÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Å°º¸µå ·¹À̾ƿô ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "¸Åü¸¦ Ŭ¸¯Çϼ¼¿ä."
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "¸¶¿ì½º¸¦ Å×½ºÆ®Çϼ¼¿ä."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "³×Æ®¿÷ ÀÎÅÍÆäÀ̽º"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "»ç¿ëÀÚ¸í"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "»ç¿ëÇÒ ¾ð¾î¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "ÇÏµå µð½ºÅ© ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "»ç¿ëÀÚ¸í"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "ÈÙ ¸¶¿ì½º"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "ÈÙ ¸¶¿ì½º"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "¸ðµâ ¿É¼Çµé:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "³×Æ®¿÷ ȯ°æ ¼³Á¤"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "ÆÄÀϽýºÅÛ Áغñ"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "¿É¼Çµé"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "¾î¶² ½Ã¸®¾ó Æ÷Æ®¿¡ ¸¶¿ì½º°¡ ¿¬°áµÇ¾î ÀÖ³ª¿ä?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "³×Æ®¿÷ ȯ°æ ¼³Á¤"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "¾î¶² Á¾·ùÀÇ ¸¶¿ì½º¸¦ »ç¿ëÇϽʴϱî?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "¾î¶² Á¾·ùÀÇ ¸¶¿ì½º¸¦ »ç¿ëÇϽʴϱî?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "±âŸ"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "½Ã½ºÅÛ ¼³Ä¡"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "»ç¿ëÀÚ Á¤ÀÇ"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- ÀÌÀü"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "»óÅÂ:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "»ç¿ëÀÚ Á¤ÀÇ"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "´ÙÀ½ ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "¼³Ä¡ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "»ç¿ëÇÒ ¾ð¾î¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "»ç¿ëÇÒ ¾ð¾î¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "»ç¿ëÇÒ ¾ð¾î¸¦ ¼±ÅÃÇØ ÁÖ¼¼¿ä."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "ÀåÄ¡¸¦ °Ë»öÇÏ°í ÀÖ½À´Ï´Ù..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "¸¶¿ì½º¸¦ Å×½ºÆ®Çϼ¼¿ä."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "¼³Ä¡ÇÒ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "³×Æ®¿÷ ȯ°æ ¼³Á¤"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "³×Æ®¿÷ ȯ°æ ¼³Á¤"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "¼³Á¤"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN ¼³Á¤"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "ÆÄÀϽýºÅÛ Áغñ"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s ¼³Ä¡ ½ÇÆÐ. ´ÙÀ½°ú °°Àº ¿À·ù°¡ ¹ß»ýÇß½À´Ï´Ù:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "³×Æ®¿÷ Ä«µå¸¦ ãÀ»¼ö ¾ø½À´Ï´Ù"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "¿Ï·á"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "¼³Ä¡ ÁغñÁßÀÔ´Ï´Ù"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "Á¦ÇÑ"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "ÆÄƼ¼Ç Æ÷¸Ë"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN ¼³Á¤"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "¸¶¿îÆ® À§Ä¡"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Æ÷¸ËÇÒ ÆÄƼ¼ÇÀ» ¼±ÅÃÇϼ¼¿ä"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "¿ÀÇǽº"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "ÁßÁö"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "ÇÁ¸°ÅÍ"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "½Ã½ºÅÛ ¼³Ä¡"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "ÆÄÀÏÀ» ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "ÇÁ¸°ÅÍ Á¦°Å"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "ÃʱâÈ­ ¸Þ½ÃÁö"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "³×Æ®¿÷ ¾î´ðÅ͸¦ ãÀ» ¼ö ¾ø½À´Ï´Ù!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "¼³Ä¡"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "³×Æ®¿÷ ¾î´ðÅ͸¦ ãÀ» ¼ö ¾ø½À´Ï´Ù!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "¼³Ä¡ Á¾·á"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "ÀÎÅÍ³Ý ¿¬°á °øÀ¯"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "ÇöÀç ÀÎÅÍ³Ý ¿¬°á °øÀ¯°¡ °¡´ÉÇÑ »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ÀÎÅÍ³Ý ¿¬°á°øÀ¯ ¼³Á¤Àº ÀÌ¹Ì ¿Ï·áµÇ¾ú½À´Ï´Ù.\n"
-"ÇöÀç °¡´ÉÇÑ »óÅÂÀÔ´Ï´Ù.\n"
-"\n"
-"¹«½¼ ÀÛ¾÷À» ÇϽðڽÀ´Ï±î?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "ÇØÁ¦"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "Ãë¼Ò"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "Àç¼³Á¤"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "¼­¹ö ÁßÁö Áß..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "ÀÌÁ¦ ÀÎÅÍ³Ý ¿¬°á °øÀ¯°¡ ±ÝÁöµÇ¾ú½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "ÇöÀç ÀÎÅÍ³Ý ¿¬°á °øÀ¯°¡ ºÒ°¡´ÉÇÑ »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ÀÎÅÍ³Ý ¿¬°á°øÀ¯ ¼³Á¤Àº ÀÌ¹Ì ¿Ï·áµÇ¾ú½À´Ï´Ù.\n"
-"ÇöÀç ºÒ°¡´ÉÇÑ »óÅÂÀÔ´Ï´Ù.\n"
-"\n"
-"¹«½¼ ÀÛ¾÷À» ÇϽðڽÀ´Ï±î?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "Çã¿ë"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "¼­¹ö Çã¿ë Áß"
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "ÀÌÁ¦ ÀÎÅÍ³Ý ¿¬°á °øÀ¯°¡ Çã¿ëµÇ¾ú½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"ÀÌÁ¦ ÀÎÅÍ³Ý ¿¬°á °øÀ¯¸¦ À§Çؼ­ ´ÔÀÇ ÄÄÇ»Å͸¦ ¼³Á¤ÇÏ·Á°í ÇÕ´Ï´Ù.\n"
-"ÀÌ·ÎÀÎÇØ, Áö¿ª ³×Æ®¿÷ÀÇ ´Ù¸¥ ÄÄÇ»Å͵鵵 ÀÌ ÄÄÇ»ÅÍÀÇ ÀÎÅÍ³Ý ¿¬°áÀ» »ç¿ëÇÒ ¼ö "
-"ÀÖ°Ô µË´Ï´Ù.\n"
-"\n"
-"ÁÖÀÇ: Áö¿ª ³×Æ®¿÷(·£)À» ¸ñÀûÀ¸·Î ¼³Ä¡µÈ ³×Æ®¿÷ ¾î´ðÅÍ°¡ ÀÖ¾î¾ß ÇÕ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "ÀÎÅÍÆäÀ̽º %s (%s ¸ðµâ »ç¿ë)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "ÀÎÅÍÆäÀ̽º %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "³×Æ®¿÷ ¾î´ðÅ͸¦ ãÀ» ¼ö ¾ø½À´Ï´Ù!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"¾î¶°ÇÑ ³×Æ®¿÷ ¾î´ðÅ͵µ ¹ß°ßµÇÁö ¾Ê½À´Ï´Ù. Çϵå¿þ¾î ¼³Á¤ µµ±¸¸¦ ½ÇÇàÇØ º¸¼¼¿ä."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "³×Æ®¿÷ ÀÎÅÍÆäÀ̽º"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"½Ã½ºÅÛ¿¡ ¿ÀÁ÷ ÇϳªÀÇ ¼³Á¤µÈ ³×Æ®¿÷ ¾î´ðÅÍ°¡ ÀÖ½À´Ï´Ù:\n"
-"\n"
-"%s\n"
-"\n"
-"±× ¾î´ðÅÍ·Î Áö¿ª ³×Æ®¿÷À» ¼³Á¤ÇÒ °ÍÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "¾î´À ³×Æ®¿÷ ¾î´ðÅÍ°¡ Áö¿ª ³×Æ®¿÷À¸·Î ¿¬°áµÉ °ÍÀÎÁö ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "³×Æ®¿÷ ±â´ÉÀÌ ¼³Á¤µÇÁö ¾Ê¾Ò½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "ÀÚµ¿ CUPS ¼³Á¤"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "ÀÎÅÍ³Ý ¼³Á¤ º¯°æ"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS ¼­¹ö IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "ÇöÀç ¼³Á¤ %s¿¡¼­ ÀáÀçÀûÀÎ ·£ ÁÖ¼Ò Ãæµ¹ÀÌ ¹ß°ßµË´Ï´Ù!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "¹æÈ­º® ¼³Á¤ÀÌ °¨ÁöµÇ¾ú½À´Ï´Ù!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"°æ°í! ±âÁ¸ÀÇ ¹æÈ­º® ¼³Á¤ÀÌ °¨ÁöµÇ¾ú½À´Ï´Ù. ¼³Ä¡°¡ ³¡³­ ÈÄ¿¡ Á÷Á¢ ¼öÁ¤ÇÒ ÇÊ¿ä"
-"°¡ ÀÖ½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "¼³Á¤ Áß..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "½ºÅ©¸³Æ® ¼³Á¤ Áß, ¼ÒÇÁÆ®¿þ¾î ¼³Ä¡ Áß, ¼­¹ö ½ÃÀÛ Áß..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "ÆÑÅ°Áö ¼³Ä¡Áß ¹®Á¦ ¹ß»ý %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"¸ðµç °ÍÀÌ ¼³Á¤µÇ¾ú½À´Ï´Ù.\n"
-"ÀÌÁ¦ ÀÚµ¿ ³×Æ®¿÷ ¼³Á¤±â´É(DHCP)À¸·Î Áö¿ª ³×Æ®¿ö»óÀÇ ´Ù¸¥ ÄÄÇ»ÅÍ¿Í ÀÎÅÍ³Ý ¿¬"
-"°á °øÀ¯¸¦ ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "¼³Á¤Àº ÀÌ¹Ì ¿Ï·áµÇ¾úÁö¸¸, ÇöÀç ÇØÁ¦µÈ »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "¼³Á¤ÀÌ ÀÌ¹Ì ¿Ï·áµÇ¾úÀ¸¸ç, ÇöÀç Çã¿ëµÈ »óÅÂÀÔ´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "¾î¶°ÇÑ ÀÎÅÍ³Ý ¿¬°á °øÀ¯µµ ¼³Á¤µÈ ÀûÀÌ ¾ø½À´Ï´Ù."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "ÀÎÅÍ³Ý ¿¬°á°øÀ¯ ¼³Á¤"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÀÎÅÍ³Ý ¿¬°á°øÀ¯ À¯Æ¿¸®Æ¼¿¡ Àß ¿À¼Ì½À´Ï´Ù!\n"
-"\n"
-"%s\n"
-"\n"
-"¸¶¹ý»ç¸¦ ½ÇÇàÇÏ·Á¸é ¡¸¼³Á¤¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "³×Æ®¿÷ ¼³Á¤ (%d ¾îµªÅÍ)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "ÇÁ·ÎÆÄÀÏ: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "ÇÁ·ÎÆÄÀÏ Áö¿ì±â"
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Áö¿ï ÇÁ·ÎÆÄÀÏ"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "»õ ÇÁ·ÎÆÄÀÏ..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"¸¸µé ÇÁ·ÎÆÄÀÏ À̸§ (»õ ÇÁ·ÎÆÄÀÏÀº ÇöÀç ÇÁ·ÎÆÄÀÏÀÇ »çº»À¸·Î¼­ ¸¸µé¾î Áý´Ï´Ù.):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "È£½ºÆ®¸í:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "ÀÎÅÍ³Ý ¾×¼¼½º"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "À¯Çü: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "°ÔÀÌÆ®¿þÀÌ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "ÀÎÅÍÆäÀ̽º:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "»óÅÂ:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "ÀÎÅÍ³Ý Á¢±Ù ¼³Á¤..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN ¼³Á¤"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "µå¶óÀ̹ö"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "ÀÎÅÍÆäÀ̽º"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "ÇÁ·ÎÅäÄÝ"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "»óÅÂ:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Áö¿ª ³×Æ®¿÷ ¼³Á¤..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "¸¶¹ý»ç¸¦ ½ÇÇàÇÏ·Á¸é ¿©±â¸¦ ´©¸£¼¼¿ä. ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "¸¶¹ý»ç..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Àû¿ë"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "±â´Ù·Á ÁÖ¼¼¿ä... ¼³Á¤À» Àû¿ëÇÏ°í ÀÖ½À´Ï´Ù."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "¿¬°áµÊ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "¿¬°á ¾ÈµÊ"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "¿¬°á..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "¿¬°á ²÷±â..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"¼³Á¤µÈ ÀÎÅÍÆäÀ̽º°¡ ¾ø½À´Ï´Ù.\n"
-"¡¸¼³Á¤¡¹À» ´­·¯ ÀÎÅÍÆäÀ̽º¸¦ ¸ÕÀú ¼³Á¤Çϼ¼¿ä."
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN ¼³Á¤"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "¾î´ðÅÍ %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "ºÎÆ® ÇÁ·ÎÅäÄÝ"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "ºÎÆýà ½ÃÀÛµÊ"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP Ŭ¶óÀ̾ðÆ®"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "Áö±Ý È°¼ºÈ­"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "Áö±Ý ºñÈ°¼ºÈ­"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"ÀÎÅÍ³Ý ¿¬°áÀÌ ¾ø½À´Ï´Ù.\n"
-"¡¸¼³Á¤¡¹À» ´­·¯ ¸ÕÀú ¿¬°áÀ» ¼³Á¤Çϼ¼¿ä."
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "ÀÎÅÍ³Ý ¿¬°á ¼³Á¤"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "ÀÎÅÍ³Ý ¿¬°á ¼³Á¤"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "¿¬°á À¯Çü: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "ÀÎÀÚ"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "°ÔÀÌÆ®¿þÀÌ"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "ÀÌ´õ³Ý Ä«µå"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Ŭ¶óÀ̾ðÆ®"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "º¸¾È ¼öÁØ ¼³Á¤"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ÄÁÆ®·Ñ ¼¾ÅÍ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "»ç¿ëÇÒ µµ±¸¸¦ ¼±ÅÃÇϼ¼¿ä."
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "ij³ª´Ù (Äùº¤)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "¾ÆÀ̽½·£µå"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "½Ã¸®¾ó ¸¶¿ì½º"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "»ç¿ë¹ý: keyboarddrake [--expert] [Å°º¸µå]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Å°º¸µå ·¹À̾ƿô ¼±ÅÃ"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Äֿܼ¡¼­ ¹é½ºÆäÀ̽º Å°°¡ Áö¿ì±â¸¦ Çϵµ·Ï ÇϽðڽÀ´Ï±î?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "CDROM ¹Ù²Ù±â"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"¼³Ä¡ CD-ROMÀ» ³ÖÀº ÈÄ¿¡ ¡¸È®ÀΡ¹À» ´©¸£¼¼¿ä.\n"
-"CD-ROMÀÌ ¾ø´Ù¸é, ¡¸Ãë¼Ò¡¹¸¦ ¶óÀÌºê ¾÷±×·¹À̵带 Ãë¼ÒÇϼ¼¿ä."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "¶óÀÌºê ¾÷±×·¹À̵带 ½ÃÀÛÇÒ ¼ö ¾ø½À´Ï´Ù!!! \n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "·Î±×µå·¹ÀÌÅ©"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "¿À´Ã ³¯Â¥¿¡ ´ëÇظ¸ º¸À̱â"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/ÆÄÀÏ(F)/»õ·Î ¸¸µé±â(_N)"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/ÆÄÀÏ(F)/¿­±â(_O)"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/ÆÄÀÏ(F)/ÀúÀå(_S)"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/ÆÄÀÏ(F)/»õ À̸§À¸·Î ÀúÀå(_A)"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/ÆÄÀÏ(F)/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/¿É¼Ç(_O)"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/¿É¼Ç(O)/Å×½ºÆ®"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/µµ¿ò¸»(_H)"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/µµ¿ò¸»(H)/ÀÌ ÇÁ·Î±×·¥Àº(_A)..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-"-misc-fixed-medium-r-*-*-*-120-75-75-*-*-iso8859-1,-*-gulim-medium-r-normal--"
-"*-120-75-75-c-*-ksc5601.1987-0,*-r-*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-"-misc-fixed-bold-r-*-*-*-120-75-75-*-*-iso8859-1,-*-gulim-bold-r-normal--*-"
-"120-75-75-c-*-ksc5601.1987-0,*-r-*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "»ç¿ëÀÚ¸í"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "¸Þ½ÃÁö"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "½Ã½ºÅÛ ·Î±×"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "°Ë»ö"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "·Î±× ºÐ¼® µµ±¸"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "¼³Á¤°ª"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ãÀ» ¹®ÀÚ¿­"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "Á¦¿ÜÇÒ ¹®ÀÚ¿­"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "ÆÄÀÏ ¼±ÅÃ"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "´Þ·Â"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "ÆÄÀÏ ³»¿ë"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "±â´Ù·Á ÁÖ¼¼¿ä. ÆÄÀÏ ºÐ¼® Áß: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "ÀÎÅÍ³Ý ¼³Á¤"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"ÇÁ¶ô½Ã ¼³Á¤ µµ±¸¿¡ Àß ¿À¼Ì½À´Ï´Ù.\n"
-"\n"
-"¿©±â¼­ ·Î±×Àΰú ºñ¹Ð¹øÈ£¸¦ ÇÊ¿ä ¶Ç´Â ÇÊ¿ä·ÎÇÏÁö ¾Ê´Â\n"
-"HTTP¿Í FTP ÇÁ¶ô½Ã¸¦ ¼³Á¤ÇÒ ¼ö ÀÖ½À´Ï´Ù.\n"
-
-# ../../share/compssUsers
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "¾ÆÆÄÄ¡¿Í ÇÁ·ÎFTPD"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Á¾·á"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "¼­ºñ½º"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Æ÷¸Ë Áß"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "ÀÎÅÍ³Ý ¼³Á¤"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "»õ À̸§À¸·Î ÀúÀå"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "¾î¶² Á¾·ùÀÇ ¸¶¿ì½º¸¦ »ç¿ëÇϽʴϱî?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "¹ß°ßµÈ ½Ã¸®¾ó_USB°¡ ¾ø½À´Ï´Ù.\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "3¹öÆ° ¿¡¹Ä·¹ÀÌÆ®?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "±×·¡ÇÈ Ä«µå ¼±ÅÃ"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "ºÎÆ® ÀåÄ¡"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "¹æÈ­º® ¼³Á¤"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "¹æÈ­º® ¼³Á¤"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"¹æÈ­º®\n"
-"\n"
-"¹æÈ­º®Àº ÀÌ¹Ì ¼³Á¤µÇ¾î ÀÖ½À´Ï´Ù.\n"
-"¹æÈ­º®À» º¯°æ ¶Ç´Â Á¦°ÅÇÏ·Á¸é, ¡¸¼³Á¤¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"¹æÈ­º®\n"
-"\n"
-"Ç¥ÁØ ¹æÈ­º®À» ¼³Á¤ÇÏ·Á¸é, ¡¸¼³Á¤¡¹À» ´©¸£¼¼¿ä."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "¾ð¾î ¼±ÅÃ"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "¼³Ä¡ Ŭ·¡½º ¼±ÅÃ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "ÇÏµå µð½ºÅ© ¼±ÅÃ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "¸¶¿ì½º ¼³Á¤"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Å°º¸µå ¼±ÅÃ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "º¸¾È"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "ÆÄÀϽýºÅÛ Áغñ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "ÆÄƼ¼Ç Æ÷¸Ë"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "¼³Ä¡ ÆÑÅ°Áö ¼±ÅÃ"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "½Ã½ºÅÛ ¼³Ä¡"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "»ç¿ëÀÚ Ãß°¡"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "³×Æ®¿÷ ¼³Á¤"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "¼­ºñ½º ¼³Á¤"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "ºÎÆ®·Î´õ ¼³Ä¡"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "ºÎÆ®µð½ºÅ© Á¦ÀÛ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X ¼³Á¤"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "½Ã½ºÅÛ ¼³Ä¡"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "¼³Ä¡ Á¾·á"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"TinyFirewall ¼³Á¤\n"
-"\n"
-"ÀÌ°ÍÀº ¸®´ª½º ¸Çµå·¹ÀÌÅ© ½Ã½ºÅÛÀÇ °³ÀÎ ¹æÈ­º®À» ¼³Á¤ÇÕ´Ï´Ù.\n"
-"°­·ÂÇÑ Àü¹® ¹æÈ­º®À» »ç¿ëÇÏ°í ½Í´Ù¸é, ¸Çµå·¹ÀÌÅ© º¸¾È ¹æÈ­º®\n"
-"¹èÆ÷ÆÇÀ» ±¸ÇϽñ⠹ٶø´Ï´Ù."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"ÀÌÁ¦ ÀÎÅͳÝÀ¸·ÎºÎÅÍ Á¢¼ÓÇÒ ¼ö ÀÖ´Â ¼­ºñ½º¿¡ °üÇÑ Áú¹®À» ÇÒ °ÍÀÔ´Ï´Ù.\n"
-"ÄÄÇ»ÅÍÀÇ º¸¾È»ó Áß¿äÇϹǷΠ°¢ Áú¹®¿¡ ÁÖÀÇÇؼ­ ÀÀÇϽñ⠹ٶø´Ï´Ù.\n"
-"\n"
-"¼­ºñ½º Áß¿¡ »ç¿ëÇÏÁö ¾Ê´Â °ÍÀÌ ÀÖ´Ù¸é, ¹æÈ­º®À¸·Î ¸·½À´Ï´Ù.\n"
-"ÀÌ ¼³Á¤Àº ¾ðÁ¦¶óµµ ÀÌ ÇÁ·Î±×·¥À» ´Ù½Ã ½ÇÇàÇÔÀ¸·Î½á \n"
-"º¯°æÇÒ ¼ö ÀÖ½À´Ï´Ù!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"ÀÎÅ׳ÝÀÇ ¾îµð¼­¶óµµ Á¢¼ÓÇÒ ¼ö ÀÖ´Â À¥¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"¸¸¾à ¿ÀÁ÷ ÀÌ ÄÄÇ»ÅÍ¿¡¼­¸¸ Á¢¼ÓÇÒ ¼ö ÀÖ´Â À¥¼­¹ö¸¦ ¿î¿ëÇÑ´Ù¸é,\n"
-"¾ÈÀüÇÏ°Ô ¡¸¾Æ´Ï¿À¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"³×ÀÓ ¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"¸¸¾à IP¿Í Áö¿ª Á¤º¸¸¦ Àüü ÀÎÅͳÝÀ¸·Î º¸³»µµ·Ï ¼³Á¤ÇÏÁö ¾Ê¾Ò´Ù¸é,\n"
-"¡¸¾Æ´Ï¿À¡¹¸¦ ´©¸£¼¼¿ä.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"º¸¾È ½©(SSH) Á¢¼ÓÀ» Çã¿ëÇϽðڽÀ´Ï±î?\n"
-"ÀÌ°ÍÀº ¿ÜºÎ¿¡¼­ ·Î±×ÀÎÇϱâÀ§ÇØ »ç¿ëµÇ´Â ÅÚ³Ý ´ë¿ë ÇÁ·Î±×·¥\n"
-"ÀÔ´Ï´Ù. ¾ÆÁ÷µµ ÅÚ³ÝÀ» »ç¿ëÇÏ°í ÀÖ´Ù¸é, SSH·Î ¹Ù²Ù¼¼¿ä.\n"
-"ÅÚ³ÝÀº ¾Ïȣȭ°¡ µÇ¾î ÀÖÁö ¾Ê±â ¶§¹®¿¡, ´ÔÀÌ ÅÚ³ÝÀ» »ç¿ëÇÒ ¶§,\n"
-"¿ÜºÎ °ø°ÝÀÚ°¡ ¾ÏÈ£¸¦ ÈÉÄ¥ ¼ö ÀÖ½À´Ï´Ù. SSH´Â ¾Ïȣȭ¸¦ »ç¿ëÇϱâ\n"
-"¶§¹®¿¡ ÀÌ·± µµÃ»À¸·ÎºÎÅÍ ¾ÈÀüÇÕ´Ï´Ù."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"¿ÜºÎ ÅÚ³Ý Á¢¼ÓÀ» Çã¿ëÇϽðڽÀ´Ï±î?\n"
-"ÀÌÀü È­¸é¿¡¼­ ¼³¸íÇßµíÀÌ, ÀÌ°ÍÀº Á¤¸» À§ÇèÇÑ °ÍÀÔ´Ï´Ù.\n"
-"¡¸¾Æ´Ï¿À¡¹¸¦ ´©¸£°í SSH¸¦ »ç¿ëÇÒ °ÍÀ» °­·ÂÈ÷\n"
-"±ÇÀåÇÕ´Ï´Ù.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"ÀÎÅͳݿ¡¼­ Á¢¼ÓÇÒ ¼ö ÀÖ´Â FTP ¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"¸¸¾à ±×·¯ÇÏ´Ù¸é, À͸í Á¢¼Ó¸¸À» Çã¿ëÇÒ °ÍÀ» °­·ÂÈ÷\n"
-"±ÇÀåÇÕ´Ï´Ù. FTPµµ ¶ÇÇÑ ¾Ïȣȭ¸¦ »ç¿ëÇÏÁö ¾Ê±â ¶§¹®¿¡\n"
-"FTP·Î Àü¼ÛµÇ´Â ¾î¶°ÇÑ ¾ÏÈ£µµ °ø°ÝÀÚ¿¡°Ô ³ëÃâµÉ ¼ö ÀÖ½À´Ï´Ù.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"¸ÞÀÏ ¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"¸¸¾à pine, mutt ¶Ç´Â ±× ¿ÜÀÇ ÅؽºÆ® ±â¹Ý ¸ÞÀÏ ÇÁ·Î±×·¥À» »ç¿ëÇÑ´Ù¸é, \n"
-"ÇÊ¿äÇÕ´Ï´Ù. ±×·¸Áö ¾Ê´Ù¸é ¹æÈ­º®À¸·Î ¸·À¸¼¼¿ä.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP ¶Ç´Â IMAP ¼­¹ö¸¦ ¿î¿ëÇմϱî?\n"
-"ÀÌ°ÍÀº »ç¿ëÀڵ鿡°Ô À¥ ±â¹ÝÀÌ ¾Æ´Ñ ¹æ¹ýÀ¸·Î ¸ÞÀÏ °èÁ¤À» \n"
-"¼­ºñ½ºÇÒ ¶§ »ç¿ëµË´Ï´Ù.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"2.2 Ä¿³ÎÀ» »ç¿ëÇÏ°í ÀÖ´Â µí ÇÕ´Ï´Ù. ³×Æ®¿÷ IP°¡ Áý ¶Ç´Â »ç¹«½Ç\n"
-"µîÀÇ ´Ù¸¥ ÄÄÇ»³Ê¿¡ ÀÇÇØ ÀÚµ¿ ÇÒ´çµÈ´Ù¸é(À¯µ¿ IP),\n"
-"ÀÌ°ÍÀÌ ÇÊ¿äÇÕ´Ï´Ù.\n"
-"ÀÌ¿Í °°Àº ȯ°æ¿¡ ÀÖ½À´Ï±î?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"ÀÌ ÄÄÇ»ÅÍÀÇ ½Ã°£ÀÌ ´Ù¸¥ ÄÄÇ»ÅÍ¿¡ ÀÇÇØ µ¿±âÈ­ µË´Ï±î?\n"
-"´ë°³ ÀÌ°ÍÀº Áß±Þ À¯´Ð½º/¸®´ª½º Áý´Ü¿¡¼­ ·Î±× ±â·Ï ¶Ç´Â\n"
-"±× ¿ÜÀÇ ¿ëµµ·Î¸¦ À§ÇØ »ç¿ëµË´Ï´Ù. ÀÌ ÄÄÇ»ÅÍ°¡ ´ë±Ô¸ð\n"
-"»ç¹«½Ç ³×Æ®¿÷¿¡ Âü¿©ÇÏ°í ÀÖÁö ¾Ê°Å³ª, ÀÌ°Í¿¡ ´ëÇØ Ã³À½\n"
-" µé¾î º»´Ù¸é, ¾Æ¸¶ ÇÊ¿äÇÏÁö ¾ÊÀ» °ÍÀÔ´Ï´Ù."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"¼³Á¤ ¿Ï·á. º¯°æ »çÇ×À» µð½ºÅ©¿¡ ÀúÀåÇÒ±î¿ä?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s¸¦ ¿­ ¼ö ¾ø½À´Ï´Ù: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%s¸¦ ¾²±â ¸ðµå·Î ¿­ ¼ö ¾ø½À´Ï´Ù: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "¹æÈ­º® ¼³Á¤"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "¼³Ä¡ ÁغñÁßÀÔ´Ï´Ù. Àá½Ã ±â´Ù¸®¼¼¿ä."
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "À¥/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "³×Æ®¿÷ ÄÄÇ»ÅÍ (Ŭ¶óÀ̾ðÆ®)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ¼­¹ö, »ï¹Ù ¼­¹ö, ÇÁ¶ô½Ã ¼­¹ö, SSH ¼­¹ö"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "¿ÀÇǽº"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME ¿öÅ©½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm pilot ¶Ç´Â Visor¿ë µµ±¸µé"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "¿öÅ©½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "¹æÈ­º®/¶ó¿ìÅÍ"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "µµ¸ÞÀÎ ³×ÀÓ ¹× ³×Æ®¿÷ Á¤º¸ ¼­¹ö"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"¿ÀÇǽº ÇÁ·Î±×·¥µé: ¿öµåÇÁ·Î¼¼¼­ (kword, abiword), ½ºÇÁ·¹µå½¬Æ® (kspread,"
-"gnumeric), pdf ºä¾î, µîµî"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "¿Àµð¿À °ü·Ã µµ±¸; mp3/midi Ç÷¹À̾î, ¹Í¼­, µîµî"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "¸®´ª½º ¹× ÀÚÀ¯ ¼ÒÇÁÆ®¿þ¾î¿¡ ´ëÇÑ ¼­Àû°ú Howto¹®¼­"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ¿öÅ©½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, À©µµ¿ì ¸ÞÀÌÄ¿, ÀζóÀÌÆ°¸ÕÆ®, Fvwm, µîµî"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¸ÖƼ¹Ìµð¾î - ºñµð¿À"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "¸ÞÀÏ, ´º½º, À¥, ÆÄÀÏÀü¼Û, äÆÃ¿ë µµ±¸¸ðÀ½"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "µ¥ÀÌÅͺ£À̽º"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ¶Ç´Â MySQL µ¥ÀÌÅͺ£À̽º ¼­¹ö"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "½¬¿î ÄÄÇ»ÅÍ ¼³Á¤À» À§ÇÑ µµ±¸"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¸ÖƼ¹Ìµð¾î - »ç¿îµå"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "À¯Æ¿·¯Æ¼"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "¹®¼­"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "ÄÜ¼Ö µµ±¸"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "postfix ¸ÞÀÏ ¼­¹ö, Inn ´º½º ¼­¹ö"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "ÀÎÅÍ³Ý ½ºÅ×À̼Ç"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¸ÖƼ¹Ìµð¾î ½ºÅ×À̼Ç"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "¼³Á¤"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Ãß°¡ ±×·¡ÇÈ µ¥½ºÅ©Å¾ (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "K Desktop ȯ°æ, ¿©·¯°¡Áö µµ±¸¸¦ ¼ö¹ÝÇÑ ±âº» ±×·¡ÇÈ È¯°æ"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "±×·¡ÇÈ È¯°æ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "¾ÆÆÄÄ¡¿Í ÇÁ·ÎFTPD"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD Á¦ÀÛ ¹× ±Á±â µµ±¸"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "¿ÀÇǽº ¿öÅ©½ºÅ×À̼Ç"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "¼­¹ö"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "±×³ð, Icewm, À©µµ¿ì ¸ÞÀÌÄ¿, ÀζóÀÌÆ°¸ÕÆ®, Fvwm, µîµî"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "GIMP °°Àº ±×·¡ÇÈ ÇÁ·Î±×·¥"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C/C++ °³¹ß ¶óÀ̺귯¸®, ÇÁ·Î±×·¥ ¹× Çì´õÆÄÀÏ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "³×Æ®¿÷ ÄÄÇ»ÅÍ ¼­¹ö"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "¸ÞÀÏ/±×·ì¿þ¾î/´º½º"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "°ÔÀÓ ½ºÅ×À̼Ç"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ºñµð¿À Ç÷¹ÀÌ¾î ¹× ¿¡µðÅÍ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¸ÖƼ¹Ìµð¾î - ±×·¡ÇÈ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Àå³­°¨ ÇÁ·Î±×·¥: arcade, boards, strategy, µîµî"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "¸ÞÀÏ/´º½º¸¦ ÀÏ°í º¸³»¸ç À¥°Ë»öÀ» À§ÇÑ µµ±¸¸ðÀ½(pine, mutt, tin...)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "¾ÆÄ«À̺ù, ¿¡¹Ä·¹ÀÌÅÍ, ¸ð´ÏÅ͸µ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "°³ÀÎ ±ÝÀ¶"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "»ç¿ëÀÚ Ä£È­Àû ÇÁ·Î±×·¥°ú µ¥½ºÅ©Å¾ µµ±¸¸¦ °¡Áø ±×·¡ÇÈ È¯°æ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "SSH ¹× ´Ù¸¥ ÇÁ·ÎÅäÄÝÀÇ Å¬¶óÀ̾ðÆ®"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "ÀÎÅÍ³Ý °ÔÀÌÆ®¿þÀÌ"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "»ç¿îµå ¹× ºñµð¿À ¿¬ÁÖ/ÆíÁý ÇÁ·Î±×·¥"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "±âŸ ±×·¡ÇÈ µ¥½ºÅ©Å¾"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "¿¡µðÅÍ, ½©, ÆÄÀϵµ±¸, Å͹̳Î"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "gnucash °°Àº Àڱݰü¸® ÇÁ·Î±×·¥"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "°³ÀÎ Á¤º¸°ü¸®"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¸ÖƼ¹Ìµð¾î - CD ±Á±â"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "°úÇÐ ¿öÅ©½ºÅ×À̼Ç"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "ÁßÁö"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr ""
-#~ "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,-*-gulim-bold-r-"
-#~ "normal--16-*-*-*-c-*-ksc5601.1987-0,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr "Ä¿³Î°ú ÀÏÄ¡ÇÏ´Â ¸ðµâ¿¡ Á¢±ÙÇÒ ¼ö ¾ø½À´Ï´Ù.(ÆÄÀÏ %s°¡ ¾ø½¿)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "¾ø½¿"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "±âº» ÇÁ¸°Å͸¦ ¼±ÅÃÇϼ¼¿ä!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Àû¿ë/ÇÁ¸°ÅÍ ´Ù½ÃÀбâ"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "ÀÌÁ¦ %s µå¶óÀ̹ö¿¡ ¿É¼ÇÀ» ÁöÁ¤ÇÒ ¼ö ÀÖ½À´Ï´Ù."
-
-#~ msgid "Low"
-#~ msgstr "³·À½"
-
-#~ msgid "Medium"
-#~ msgstr "º¸Åë"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "ÀÌ µî±ÞÀº º¸¾È»óÀÇ °³¼±»çÇ×ÀÌ º°·Î ¾ø½À´Ï´Ù. ¸¹Àº º¸¾È °æ°í¿Í Á¡°ËÀÌ\n"
-#~ "³ªÅ¸³³´Ï´Ù."
-
-#~ msgid "mount failed"
-#~ msgstr "¸¶¿îÆ® ½ÇÆÐ"
-
-#~ msgid "Boot mode"
-#~ msgstr "ºÎÆ® ¸ðµå"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Àü¹®°¡"
-
-#, fuzzy
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "ÇöÀç ÇÁ¸°ÅÍ¿¡ »ç¿ëÇÒ ¼ö ÀÖ´Â ¿É¼Ç ¸ñ·ÏÀ» º¸·Á¸é, ¡¸ÀÎ¼â ¿É¼Ç ¸ñ·Ï¡¹À» ´©¸£"
-#~ "¼¼¿ä.\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/¸®´ª½º´Â ½Ã°£À» GMT(±×¸®´ÏÄ¡ °ü¸® ½Ã°£)·Î °ü¸®Çϸ鼭, ¼±ÅÃµÈ ½Ã°£´ë"
-#~ "¿¡\n"
-#~ "µû¶ó ¹ø¿ªÇÏ¿© Ç¥ÇöÇÕ´Ï´Ù."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "ÀÎÅͳݿ¡ ¿¬°á"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "ÀÎÅÍ³Ý ¿¬°á ²÷±â"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "³×Æ®¿÷ ¿¬°á ¼³Á¤ (LAN ¶Ç´Â ÀÎÅͳÝ)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "¾î¶² µð½ºÅ©¸¦ À̵¿ÇÏ°í ½ÍÀ¸½Ê´Ï±î?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "¼³Ä¡ÇÒ ÆÑÅ°Áö ¼±ÅÃ"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Á¤º¸"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "GNOME ¿öÅ©½ºÅ×À̼Ç"
-
-#~ msgid "authentification"
-#~ msgstr "ÀÎÁõ"
-
-#~ msgid "user"
-#~ msgstr "»ç¿ëÀÚ"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "¾î¶² Á¾·ùÀÇ ¸¶¿ì½º¸¦ »ç¿ëÇϽʴϱî?"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "À¯È¿ÇÑ NFS °øÀ¯ÀÚ¿ø °Ë»ö Áß"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "¼­¹ö %s»óÀÇ À¯È¿ÇÑ NFS °øÀ¯ÀÚ¿ø °Ë»ö Áß"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "À¯È¿ÇÑ »ï¹Ù °øÀ¯ÀÚ¿ø °Ë»ö Áß"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "¼­¹ö %s»óÀÇ À¯È¿ÇÑ »ï¹Ù °øÀ¯ÀÚ¿ø °Ë»ö Áß"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Á¾·á"
-
-#~ msgid "Removable media"
-#~ msgstr "Å»Âø½Ä ¹Ìµð¾î"
-
-#~ msgid "Active"
-#~ msgstr "È°¼ºÈ­"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "¾Æ´Ï¿À"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "ÇÁ¸°ÅÍ, ¸ðµ¨ \"%s\", ¹ß°ß"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Áö¿ª ÇÁ¸°ÅÍ ÀåÄ¡"
-
-#~ msgid "Printer Device"
-#~ msgstr "ÇÁ¸°ÅÍ ÀåÄ¡"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "ÀåÄ¡/ÆÄÀÏ À̸§À» ãÀ» ¼ö ¾øÀ½!"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "¿ø°Ý CUPS ¼­¹öÀÇ ÇÁ¸°ÅÍ"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "¿ø°Ý ¼­¹öÀÇ ÇÁ¸°ÅÍ"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "¸®´ª½º"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "½Ã½ºÅÛ"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "±âŸ"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Å°º¸µå ·¹À̾ƿô ¼±ÅÃ"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "¸Åü¸¦ Ŭ¸¯Çϼ¼¿ä."
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "À¯Çü: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "À߸øµÈ ¹é¾÷ ÆÄÀÏ"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "X ¼³Á¤"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "ÇÁ¸°ÅÍ ÀåÄ¡"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Ãë¼Ò"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "È®ÀÎ"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "´Ý±â"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "¿¬°á Áß..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "¿¬°á ²÷´Â Áß..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "¿¬°á ²÷¾îÁ® ÀÖÁö ¾Ê½À´Ï´Ù.\n"
-#~ "·çÆ® »ç¿ëÀÚÀÇ ±ÇÇÑÀ¸·Î Á÷Á¢\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "À» ½ÇÇàÇϼ¼¿ä."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "ÀÌÁ¦ ½Ã½ºÅÛÀÇ ¿¬°áÀÌ ²÷¾îÁø »óÅÂÀÔ´Ï´Ù."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "¼³Ä¡ÇÒ ÆÑÅ°ÁöµéÀÇ ÃÑ ¿ë·® ¼±ÅÃ"
-
-#~ msgid "Total size: "
-#~ msgstr "Àüü Å©±â: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Àá½Ã¸¸ ±â´Ù¸®¼¼¿ä, "
-
-#~ msgid "Total time "
-#~ msgstr "Àüü ½Ã°£ "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "ÀÌ¹Ì ÀÖ´Â X11 ¼³Á¤À» »ç¿ëÇϽðڽÀ´Ï±î?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "¾î´À ÀåÄ¡¿¡ ÇÁ¸°ÅÍ°¡ ¿¬°áµÇ¾î ÀÖ½À´Ï±î? \n"
-#~ "(ÁÖÀÇ: ¡¸/dev/lp0¡¹´Â ¡¸LPT1¡¹¿¡ ÇØ´çÇÕ´Ï´Ù.)\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "°æ°í: ÀÌ¹Ì ¼³Á¤µÈ ³×Æ®¿÷ ÁÖ¼Ò°¡ ÀÖ½À´Ï´Ù. ´Ù½Ã ¼³Á¤ÇÒ °ÍÀÔ´Ï´Ù."
-
-#~ msgid "New"
-#~ msgstr "»õ·Î ¸¸µé±â"
-
-#~ msgid "Remote"
-#~ msgstr "¿ø°Ý"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "À§ÀÇ ¹öÆ° Áß Çϳª¸¦ ´©¸£°Å³ª,\n"
-#~ "\n"
-#~ "¡¸»õ·Î ¸¸µé±â¡¹¸¦ ÀÌ¿ëÇϼ¼¿ä."
-
-#~ msgid "Use \"New\""
-#~ msgstr "¡¸»õ·Î ¸¸µé±â¡¹»ç¿ë"
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "¸¸¾à À§¿¡¼­ ¿øÇÏ´Â Ç׸ñÀ» ãÀ» ¼ö ¾ø´Ù¸é, ¿©±â¿¡ ÀÔ·ÂÇϼ¼¿ä:"
-
-#~ msgid "Shared resource"
-#~ msgstr "°øÀ¯µÈ ÀÚ¿ø"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "¾Ö¸ÅÇÑ Ç¥Çö(%s), º¸´Ù ÀÚ¼¼È÷ ±âÀÔÇØ ÁÖ¼¼¿ä.\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (±âº»°ª %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "´ÔÀÇ ¼±ÅÃÀº? (±âº»°ªÀº %s, ¾ø´Ù¸é¡¸none¡¹ÀÔ·Â) "
diff --git a/perl-install/share/po/lt.po b/perl-install/share/po/lt.po
deleted file mode 100644
index f68be5356..000000000
--- a/perl-install/share/po/lt.po
+++ /dev/null
@@ -1,13994 +0,0 @@
-# Lithuanian transaltion of DrakX
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Kæstutis Kruþikas <DrKestas@takas.lt>, 1999
-# Mykolas Norvaiðas <Myka@centras.lt>, 1999-2001
-# Gediminas Paulauskas <menesis@delfi.lt>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX \n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-03-04 23:55+0200\n"
-"Last-Translator: Mykolas Norvaiðas <Myka@centras.lt>\n"
-"Language-Team: Lithuanian <komp_lt@konferencijos.lt>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-13\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-#, fuzzy
-msgid "Use Xinerama extension"
-msgstr "Naudokite automatiná aptikimà"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "skaitomi nustatymai"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Vaizdo plokðtë"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Pasirink vaizdo plokðtæ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Pasirink X serverá"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Pasirink X serverá"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kurià XFree konfigûracijà tu nori turëti?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Tavo plokðtë palaiko 3D árenginio akseleracijà, bet tik su XFree %s.\n"
-"Tavo plokðtë dirba su XFree %s, kuris galbût geriau palaiko 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Tavo plokðtë palaiko 3D akseleracijà su XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s su 3D árenginio akseleracija"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Jûsø korta palaiko 3D akseleracija su XFree %s.ATMINKITE, KAD TAI YRA "
-"EKSPERIMENTINIS PALIKYMAS IR GALI PAKABINTI KOMPIUTERÁ."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s su EKSPERIMENTINE 3D árenginio akseleracija"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Jûsø korta palaiko 3D árenginio akseleracija tik su XFree %s,\n"
-"ATMINKITE, KAD TAI YRA EKSPERIMENTINIS PALIKYMAS IR GALI PAKABINTI "
-"KOMPIUTERÁ.\n"
-"Jûsø korta dirba su XFree %s kuris galbût geriau palaiko 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigûravimas"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Pasirink savo vaizdo plokðtës atminties dydá"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Pasirink serverio nuostatas"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Pasirink monitoriø"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitorius"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Du svarbiausi dydþiai yra vertikalaus atnaujinimo daþnis, kuris rodo,\n"
-"kaip daþnai perpieðiamas visas ekranas, ir horizontaliosios skleistinës "
-"daþnis, kuris parodo, kaip greit perpieðiamos eilutës.\n"
-"\n"
-"Tai LABAI SVARBU, kad nenurodytum skleistinës daþnio, didesnio\n"
-"uþ palaikomà monitoriaus, nes gali já sugadinti. Jeigu abejoji,\n"
-"pasirink konservatyvià nuostatà."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalaus atnaujinimo daþnis"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalaus atnaujinimo daþnis"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitorius nenurodytas"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Vaizdo plokðtë dar nenurodyta"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Dar nepasirinkta skiriamoji geba"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Perspëjimas: ðios plokðtës bandymas gali pakabinti kompiuterá"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Nustatymø tikrinimas"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"pabandyk pakeisti kai kuriuos parametrus"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ávyko klaida:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Baigiu per %d sekundþiø (-es)"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ar toks nustatymas tave tenkina?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ávyko klaida, bandyk pakeisti kai kuriuos parametrus"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Skiriamoji geba"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Pasirink skiriamàjà gebà ir spalvø gylá"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Vaizdo plokðtë: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 serveris: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Dar"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Gerai"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Eksperto Reþimas"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Rodyti viskà"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Skiriamosios gebos"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klaviatûros iðdëstymas: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Pelës tipas: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Pelës árenginys: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitorius: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitoriaus horiz. skleistinë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitoriaus vert. skleistinë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Vaizdo plokðtë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Vaizdo plokðtë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Vaizdo atmintis: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Spalvø gylis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Skiriamoji geba: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 serveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 tvarkyklë: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ruoðiami X-Window nustatymai"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Kà tu nori daryti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Pakeisti monitoriø"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Pakeisti vaizdo plokðtæ"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Pakeisti serverio nustatymus"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Pakeisti skiriamàjà gebà"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Rodyti informacijà"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Patikrinti vël"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Iðeiti"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Iðlaikyti pakeitimus?\n"
-"Esama konfigûracija yra:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X paleidþiant"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Tu gali nustatyti, kad X startuotø automatiðkai.\n"
-"Ar tu nori, kad X startuotø po kompiuterio perkrovimo?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Praðom ið naujo paleisti %s, kad pakeitimai bûtø aktyvuoti"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Praðom atsisveikinti ir paskui paspausti Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 spalvos (8 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tûkst. spalvø (15 bitø)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tûkst. spalvø (16 bitø)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijonai spalvø (24 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijardai spalvø (32 bitai)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ar daugiau"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standartinis VGA 640x480 prie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA 800x600 prie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Suderinamas su 8514, 1024x768 prie 87 Hz interlaced (nëra 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 prie 87 Hz interlaced, 800x600 prie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Iðplëstas Super VGA, 800x600 prie 60 Hz, 640x480 prie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 prie 60 Hz, 800x600 prie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Aukðto daþnio SVGA, 1024x768 prie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Daugiadaþnis, galintis 1280x1024 prie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Daugiadaþnis, galintis 1280x1024 prie 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Daugiadaþnis, galintis 1280 prie 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitorius, galintis 1600x1200 prie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitorius, galintis 1600x1200 prie 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Pirmasis ákrovos skirsnio sektorius"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Pirmasis kaupiklio sektorius (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Ádiegimas"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kur nori ádiegti ákrovos tvarkyklæ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/GRUB ádiegimas"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO su tekstiniu meniu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO su grafiniu meniu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Ákrova su DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Ákrovos tvarkyklës pagrindinës parinktys"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Naudojama ákrovos tvarkyklë"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Ákrovos tvarkyklës ádiegimas"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Ákrovos árenginys"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nedirba su senais BIOS'ais)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktiðkas"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktiðkas"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Vaizdo reþimas"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Palaukti prieð ákraunant áprastà atvaizdà"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Slaptaþodis"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Slaptaþodis (vël)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Grieþtos komandinës eilutës parinktys"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "grieþta"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Iðvalyti /tmp kiekvienà kartà ákrovus"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tikslus RAM atminties dydis (rasta %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Leisti keletà profiliø"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Nurodyk RAM atminties dydá (MB)"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Parinktis ¥Grieþtos komandinës eilutës parinktys´ yra nenaudingà be "
-"slaptaþodþio"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Praðom bandyti vël"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Slaptaþodþiai nesutampa"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Áprastas"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Èia yra skirtingi áraðai.\n"
-"Tu gali pakeisti esamus arba prijungti naujus."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Pridëti"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Atlikta"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Taisyti RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kokio tipo áraðà tu nori pridëti?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Kitos OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Kitos OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Kitos OS (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Atvaizdas"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Ðakninis"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Pridurti"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Skaitymui-raðymui"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Lentelë"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesaugus"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Þymë"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Áprastas"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Iðmesti áraðà"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tuðèia þymë neleidþiama"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Tu privalai turëti swap skirsná"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ði þymë jau naudojama"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Rasti %s %s interfeisai"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Ar turi dar vienà?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ar tu turi koká nors %s interfeisà?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Taip"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Paþiûrëk árangos informacijà"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Ádiegiama tvarkyklë %s plokðtei %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulis %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kokià %s tvarkyklæ turëèiau iðbandyti?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kartais %s tvarkyklei reikia papildomos informacijos, kad dirbtø gerai,\n"
-"nors normaliai turi veikti ir be jos. Ar tu nori jai nurodyti papildomas\n"
-"parinktis, ar leisi pabandyti nusistatyti paèiai. Bandymas gali\n"
-"pakabinti kompiuterá, bet tai neturëtø padaryti þalos."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatinis bandymas"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Nurodyti parinktis"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Dabar tu gali nustatyti %s modulio nustatymus.\n"
-"Opcijø formatas yra toks : ''vardas=reikðmë vardas2=reikðmë2 ...''.\n"
-"Pvz, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulio parinktys:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulio %s iðkvietimas nepavyko.\n"
-"Ar nori bandyti su kitais nustatymais?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s jau pridëtas)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ðis slaptaþodis pernelyg paprastas"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Praðom suteikti vartotojo vardà"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Vartotojo vardas turi susidaryti tik ið maþøjø raidþiø, skaièiø ir simboliø "
-"`-' bei `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ðis vartotojo vardas jau pridëtas"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Pridëti vartotojà"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Ávesk vartotojà\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Priimti vartotojà"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Tikras vardas"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Vartotojo vardas"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatinis pasisveikinimas"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Að galiu nustatyti taip, kad vienas vartotojas pasisveikintø automatiðkai.\n"
-"Jei nenori to naudoti, spausk mygtukà Nutraukti."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Pasirink áprastà vartotojà:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Pasirink, kurià langø tvarkyklæ naudosi:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Praðom pasirinkti kalbà, kurià naudosi."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Tu gali pasirinkti kitas kalbas, kurios bus prieinamos po ádiegimo"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Visos"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Pridëti vartotojà"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Prisitaikyti"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS paleidþiamas"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Kokius jûs norite ádiegti paketus"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Nutraukti"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Sveiki atvykæ á cracker'iø ðalá"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Menkas"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standartinë"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Aukðtas"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Aukðtas"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranojiðkas"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ðiame lygyje reikia elgtis atsargiai. Tai leidþia lengviau naudoti sistemà,\n"
-"bet labai jautriai: ji turëtø nebûti naudojama kompiuteriuose,\n"
-"sujungtais su kitais arba prie Interneto. Èia nëra slaptaþodþiø."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Dabar slaptaþodþiai yra ájungti bet naudoti kaip tinkliná kompiuterá dar "
-"nerekomenduojama."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ðis saugumo lygis yra standartinis, rekomenduojamas kompiuteriui, kuris\n"
-"naudojamas prisijungti prie interneto kaip klientas. Nëra jokiø saugumo "
-"tikrinimø."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Su ðiuo saugumo lygiu sistemà jau galima naudoti kaip serverá. Saugumas\n"
-"yra pakankamai aukðtas, kad sistemà bûtø galima naudoti serveriui, kuris "
-"priima\n"
-"prisijungimus ið daugybës klientø."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Dabar naudojami 4 lygio privalumai,bet sistema yra visiðkai uþdaryta.\n"
-"Saugumo savybës yra maksimalios."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Pasirink saugumo lygá"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Nustatomas saugumo lygis"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Pasirink serverio nuostatas"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Sveiki, besinaudojantys %s, operaciju sistemu parinkikliu!\n"
-"\n"
-"Pasirink operaciju sistema is zemiau esancio saraso,\n"
-"arba palauk %d sekundziu, kad butu ikrauta pagal nutylejima\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Sveiki, besinaudojantys GRUB, operaciniu sistemu parinkikliu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Naudok %c ir %c klavisus, kad pasirinktum, kuris irasas pazymetas"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Spausk enter, noredami ikrauti pasirinkta OS, 'e', noredami keisti"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandas pries ikrova, arba 'c', komandinei eilutei iskviesti "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Pasirinktas irasas bus ikrautas automatiskai po %d sekundziu."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nepakanka vietos /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Darbastalis"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Paleidimo meniu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kur nori ádiegti ákrovos tvarkyklæ?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pagalba dar nesukurta.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Ádiegimo Tipo Konfiguracija"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/Bylos"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Byla/Iðeiti"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitorius"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Pakeisti monitoriø"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ákrovos metu paleisti Aurora"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Skambinimo reþimas"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Ákrovos reþimas"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneto jungties dalinimas"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Nustatyti X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemos reþimas"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Startuojant paleisti X_Windows"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, að nenoriu automatinio pasisveikinimo"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Taip, að noriu automatinio pasisveikinimo (vrtotojas, darbastalis)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Gerai"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "negaliu atidaryti /etc/inittab skaitymui: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutës"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minutë"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundës"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Að daugiau negaliu pridëti në vieno skirsnio"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Tu gali pasirinkti kitas kalbas, kurios bus prieinamos po ádiegimo"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Prancûzija"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgø"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Vokieèiø"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Graikø"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norvegø"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Pasiþiûrëti"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italø"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "nuoseklioji"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Pradþiai padaryk atsarginæ savo duomenø kopijà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Perskaityk ádëmiai!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jeigu tu planuoji naudoti aboot, nepamirðk palikti tuðèios vietos (2048 "
-"sektoriø pakanka)\n"
-"kaupiklio pradþioje"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Klaida"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Meistras"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Pasirink veiksmà"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tu turi vienà didelá FAT skirsná\n"
-"(daþniausiai naudojamas Microsoft DOS/Windows).\n"
-"Patariu tau pakeisti to skirsnio dydá\n"
-"(spragtelëk ant jo, tada ant ¥Pakeisti dydá´)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Praðom spragtelëti ant skirsnio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalës"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "primontuoti nepavyko"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tuðèias"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Kitas"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Bylø sistemos tipai:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Sukurti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Rûðis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Naudok ¥%s´ vietoj to"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Iðtrinti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Pirmiau naudok ¥Numontuoti´"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Pakeitus skirsnio %s tipà, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Pasirink veiksmà"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Sukurti naujà skirsná"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Pakeisti á eksperto reþimà"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Pakeisti á normalø reþimà"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Sugráþti"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Ar vis tiek tæsti?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Iðeiti neiðsaugojus"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Iðeiti neiðsaugojus skirsniø lentelës?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatinis suskirstymas"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Iðvalyti viskà"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Paðto informacijà"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Visi pirminiai skirsniai yra naudojami"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Að daugiau negaliu pridëti në vieno skirsnio"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Jei nori turëti daugiau skirsniø, praðom iðtrinti vienà, kad vietoj jo "
-"galëtum sukurti iðplëstiná"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Áraðyti skirsniø lentelæ"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Iðgelbëti skirsniø lentelæ"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Iðgelbëti skirsniø lentelæ"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Iðgelbëti skirsniø lentelæ"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Iðimamø laikmenø automatinis montavimas"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Pasirink bylà"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Atsarginë skirsniø lentelë nëra tokio paties dydþio\n"
-"Vis tiek tæsti?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Dëmesio"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ádëk diskelá á kaupiklá\n"
-"Visi duomenys diskelyje bus prarasti"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Bandau iðgelbëti skirsniø lentelæ"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Paðto informacijà"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Prijungimo vieta"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Pasirinktys"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Pakeisti dydá"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Perkelti"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatuoti"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Primontuoti"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Pridëti á RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Pridëti á LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Atjungti"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Paðalinti ið RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Paðalinti ið LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Taisyti RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Naudoti loopback'ui"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Sukurti naujà skirsná"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Pradþios sektorius: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Dydis (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Bylø sistemos tipas: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Montavimo taðkas: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Pirmenybë: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Suþymima loopback byla %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Pakeisti skirsnio tipà"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kokios bylø sistemos tu nori?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kur nori primontuoti loopback bylà %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kur nori primontuoti árenginá %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Negaliu nuimti montavimo taðko, nes ðis skirsnis naudojamas loopback'ui.\n"
-"Pirma paðalink loopback'us"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Skaièiuojami FAT bylø sistemos rëþiai"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Keièiamas dydis"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ðio skirsnio dydþio neina pakeisti"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Pasidaryk atsarginæ duomenø ðiame skirsnyje kopijà"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Pakeitus skirsnio %s dydá, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Pasirink naujà dydá"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Dydis (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Á kurá diskà tu nori já perkelti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektorius"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Á kurá sektoriø tu nori já perkelti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Perkeliama"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Perkeliamas skirsnis..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Pasirink jau esantá RAID, prie kurio pridëti"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "naujas"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Pasirink jau esantá LVM, prie kurio pridëti"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM vardas?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ðis skirsnis negali bûti naudojamas loopback'ui"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback bylos vardas: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Tikras vardas"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Byla jau naudojama kitam loopback'ui, pasirink kità"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Ði byla jau yra. Naudoti jà?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Modulio parinktys:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "árenginys"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "lygis"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "gabalo dydis"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Bûk atsargus: ði operacija yra pavojinga."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kokio tipo skirsniø skaidymas?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Deja, neámanoma sukurti /boot taip toli kaupiklyje (cilindre >1024).\n"
-"Arba naudok LILO ir tai neveiks, arba nenaudok LILO ir tau nereikës /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Skirsnis, kurá tu pasirinkai kaip ðakniná (/), fiziðkai yra uþ 1024-to\n"
-"disko kaupiklio cilindro, bet tu neturi /boot skirsnio. Jeigu planuoji\n"
-"naudoti LILO ákrovos programà, neuþmirðk pridëti /boot skirsnio"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Tu pasirinkai programiná RAID skirsná kaip ðakniná (/).\n"
-"Jokia ákrovos tvarkyklë negali su ja dirbti be /boot skirsnio.\n"
-"Taigi, nepamirðk sukurti /boot skirsnio"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Árenginio %s skirsniø lentelë bus áraðyta á diskà!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Tau reikia perkrauti, kad pakeitimai bûtø veiksmingi"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Suþymëjus skirsná %s, visi duomenys jame bus prarasti"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Suþymima"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Suþymima loopback byla %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Suþymimas skirsnis %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid nepavyko"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Skiriamoji geba: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Árenginys: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS kaupiklio raidë: %s (spëjama)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipas: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Pavadinimas: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Pradþia: sektorius %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Dydis: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoriai(-iø)"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Nuo cilindro %d iki cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Suþymëtas\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nesuþymëtas\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Primontuotas\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback byla(os): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Skirsnis, ákraunamas pagal nutylëjimà\n"
-"     (MS-DOS uþkrovimui, ne LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Lygis %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Gabalo dydis %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID kaupikliai %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback bylos vardas: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Galimybës tokios, ðis skirsnis\n"
-"yra Tvarkyklës skirsnis\n"
-"gariau palikite já ramybëje.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ðis specialus Bootstrap\n"
-"skirsnis yra skirtas jûsø\n"
-"sistemos dvigubai ákrovai.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Dydis: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindrø(-ai), %s galvuèiø(-os), %s sektoriø(-iai)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM kaupikliai %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Skirsniø lentelës tipas: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ant magistralës %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Pasirinktys: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Bylø sistemos tipas: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ðis slaptaþodis yra pernelyg paprastas (turi bûti bent %d simboliø ilgio)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Slaptaþodþiai nesutampa"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Pakeisti skirsnio tipà"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Praðom spragtelëti ant skirsnio"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS serveris"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s %s suþymëjimas nepavyko"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Neþinau, kaip suþymëti %s tipu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "klaida numontuojant %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "paprasta"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveris"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Tu negali naudoti JFS skirsniams, maþesniems nei 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Tu negali naudoti ReiserFS skirsniams, maþesniems nei 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Montavimo taðkai turi prasidëti /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jau yra skirsnis su montavimo taðku %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ðis katalogas turi pasilikti ðakninëje bylø sistemoje"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Tau reikia tikros bylø sistemos (ext2, reiserfs) ðiam montavimo taðkui\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Tau reikia tikros bylø sistemos (ext2, reiserfs) ðiam montavimo taðkui\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Klaida atidarant %s áraðymui: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ávyko klaida -- nerasta tinkamø árenginiø, kur bûtø galima sukurti naujus "
-"skirsnius. Praðom pasitikrinti savo árangà dël galimo gedimo"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Tu neturi jokiø skirsniø!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aukðèiau yra sàraðas Linux skirsniø, kuriuos pavyko rasti tavo\n"
-"kietajame diske. Tu gali pasilikti sprendimus, padarytus meistro, jie tinka\n"
-"daugumai atvejø. Jei nori pakeisti ðiuos sprendimus, tu turi nurodyti bent\n"
-"ðakniná skirsná (\"/\"). Nepasirink per maþo skirsnio, nes tuomet tu "
-"negalësi\n"
-"ádiegti pakankamai programinës árangos. Jei tu nori laikyti savo duomenis\n"
-"atskirame skirsnyje, pasirink, kurá naudosi \"/home\" (ámanoma tik jei turi "
-"daugiau\n"
-"nei vienà Linux skirsná).\n"
-"\n"
-"Tavo þiniai, skirsniai raðomi tokiu pavidalu: \"Pavadinimas\", \"Talpa\".\n"
-"\n"
-"\n"
-"\"Pavadinimas\" sudaromas taip: \"kaupiklio tipas\", \"kaupiklio numeris\",\n"
-"\"skirsnio numeris\" (pavyzdþiui \"hda1\").\n"
-"\n"
-"\n"
-"\"Kieto disko tipas\" yra \"hd\", jei tavo kietasis kaupiklis yra IDE tipo, "
-"ir \"sd\", jeigu\n"
-"tai SCSI kaupiklis.\n"
-"\n"
-"\n"
-"\"kaupiklio numeris\" visada yra raidë po \"sd\" arba \"hd\". IDE "
-"kaupikliams:\n"
-"\n"
-"   * \"a\" reiðkia \"pagrindinis (master) diskas, prijungtas prie pirmojo "
-"(primary) IDE valdiklio\",\n"
-"\n"
-"   * \"b\" reiðkia \"ðalutinis (slave) diskas, prijungtas prie pirmojo IDE "
-"valdiklio\",\n"
-"\n"
-"   * \"c\" reiðkia \"pagrindinis diskas, prijungtas prie antrojo (secondary) "
-"IDE valdiklio\",\n"
-"\n"
-"   * \"d\" reiðkia \"ðalutinis diskas, prijungtas prie antrojo IDE valdiklio"
-"\",\n"
-"\n"
-"\n"
-"Su SCSI kaupikliais, \"a\" reiðkia \"pirmasis diskas\", \"b\" reiðkia "
-"\"antrasis diskas\" ir t.t."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Dabar tu gali pasirinkti tarnybas, kurias nori paleisti ákrovos metu.\n"
-"\n"
-"\n"
-"Uþvedus þymeklá ant tarnybos, pasirodys pagalbos uþraðas, kuris apraðo "
-"tarnybos\n"
-"vaidmená tavo sistemoje.\n"
-"\n"
-"\n"
-"Bûk ypaè atidus ðiame þingsnyje, jeigu þadi naudotis savo kompiuteriu kaip\n"
-"serveriu: tu tikriausiai norësi nepaleisti jokiø nereikalingø tarnybø.\n"
-"Prisimink, kad kai kurios tarnybos gali bûti pavojingos, jei naudojamos "
-"serveryje.\n"
-"Apskritai, paþymëk tik tas tarnybas, kuriø tau tikrai reikia."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Dabar tu turi nuspræsti, kurioje savo kietojo disko vietoje nori ádiegti\n"
-"Mandrake Linux operacijø sistemà. Jei jis yra tuðèias arba jau esanti\n"
-"operacijø sistema naudoja visà vietà jame, tau reikës sudalinti já. Kietojo\n"
-"disko sudalinimas á skirsnius tiesiog yra jo logiðkas padalinimas taip, kad\n"
-"atsirastø laisvos vietos ádiegti tavo naujajai Mandrake Linux sistemai.\n"
-"\n"
-"\n"
-"Kadangi sudalinimo skirsniais padariniai daþniausiai yra negráþtami,\n"
-"dalinimas gali bûti gàsdinantis ir sunkus, jei tu esi nepatyræs vartotojas.\n"
-"Ðis meistras supaprastina tà procesà. Prieð pradëdamas, praðau, nepagailëk\n"
-"laiko ir paskaityk þinynà.\n"
-"\n"
-"\n"
-"Tau reikia maþiausiai dviejø skirsniø. Vienas yra paèiai operacijø "
-"sistemai,\n"
-"o kitas -- virtualiai atminèiai (vadinamai swap).\n"
-"\n"
-"\n"
-"Jei skirsniai jau buvo apibrëþti (ið praeito ádiegimo arba kitu dalinimo "
-"árankiu),\n"
-"tau tereikia pasirinkti juos, kad ádiegtum savo Linux'à.\n"
-"\n"
-"\n"
-"Jei skirsniai dar nebuvo apibrëþti, tu turi juos sukurti. Kad tai "
-"padarytum,\n"
-"naudokis aukðèiau esanèiu meistru. Priklausomai nuo tavo kietojo disko\n"
-"situacijos, yra keli skirtingi sprendimai:\n"
-"\n"
-"* Naudoti esamà skirsná: meistras rado vienà ar daugiau Linux skirsniø tavo "
-"sistemoje. Jei tu nori juos\n"
-"  naudoti, pasirink tai.\n"
-"\n"
-"\n"
-"* Iðvalyti visà diskà: jei tu nori sunaikinti visus duomenis ir skirsnius, "
-"esanèius kietajame diske, ir pakeisti juos\n"
-"  nauja Mandrake Linux sistema, gali pasirinkti ðá variantà. Bûk atsargus su "
-"ðiuo sprendimu, nes jei sutiksi,\n"
-"  nebegalësi apsigalvoti ir sugráþti.\n"
-"\n"
-"\n"
-"* Naudoti tuðèià vietà Windows skirsnyje: jei Microsoft Windows yra ádiegti "
-"á kietàjá diskà ir uþima visà vietà,\n"
-"  esanèià jame, tau teks atlaisvinti vietos Linux duomenims. Kad tai "
-"padarytum, tu gali iðtrinti Windows skirsná\n"
-"  ir duomenis (þiûrëk \"Iðvalyti visà diskà\" bei \"Eksperto reþimas\" "
-"sprendimus) arba pakeisti Windows skirsnio\n"
-"  dydá. Dydþio pakeitimas gali bûti atliktas be duomenø praradimo. Ðis "
-"sprendimas yra rekomenduojamas, jei\n"
-"  tu nori naudoti tiek Mandrake Linux, tiek Microsoft Windows tame paèiame "
-"kompiuteryje.\n"
-"\n"
-"\n"
-"  Prieð pasirinkdamas ðá sprendimà, suprask, kad Microsoft Windows skirsnio "
-"dydis bus maþesnis, nei yra\n"
-"  dabar. Tai reiðkia, kad tu turësi maþiau laisvos vietos Windows'uose "
-"áraðyti duomenims bei ádiegti naujas\n"
-"  programas.\n"
-"\n"
-"\n"
-"* Eksperto reþimas: jei tu nori rankomis sudalinti skirsniais savo kietàjá "
-"diskà, gali rinktis ðá variantà. Ádëmiai\n"
-"  pagalvok, prieð pasirinkdamas ðá sprendimà. Jis yra galingas, taèiau labai "
-"pavojingas. Tu gali prarasti \n"
-"  visus savo duomenis labai lengvai. Taigi, nesirink ðio sprendimo, nebent "
-"tikrai þinai, kà darai."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Bet kokie naujai sukurti skirsniai turi bûti suþymëti, kad juos\n"
-"bûtø galima naudoti (suþymëjimas reiðkia bylø sistemos sukûrimà).\n"
-"\n"
-"\n"
-"Dabar tu gali norëti ið naujo suþymëti kai kuriuos esamus skirsnius, kad\n"
-"iðtrintum duomenis ið jø. Jei nori tai padaryti, paþymëk ir tuos skirsnius,\n"
-"kuriuos nori suþymëti.\n"
-"\n"
-"\n"
-"Pastaba: nebûtina ið naujo suþymëti visø anksèiau sukurtø skirsniø.\n"
-"Tu privalai suþymëti ið naujo skirsnius, kuriuose bus operacijø sistema\n"
-"(tokius kaip \"/\", \"/usr\" ar \"/var\"), taèiau skirsniø su duomenimis, "
-"kuriuos\n"
-"nori iðlaikyti, suþymëti nereikia (daþniausiai \"/home\").\n"
-"\n"
-"\n"
-"Bûk atsargus, pasirinkdamas skirsnius, kadangi suþymint visi duomenys\n"
-"bus iðtrinti, ir nebebus ámanoma jø atstatyti.\n"
-"\n"
-"\n"
-"Spausk \"Gerai\", kai bûsi pasiruoðæs skirsniø suþymëjimui.\n"
-"\n"
-"\n"
-"Spausk \"Atðaukti\", jei nori pasirinkti kitus skirsnius, á kuriuos ádiegti\n"
-"Mandrake Linux sistemà."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Tavo naujoji Mandrake Linux operacijø sistema ðiuo metu yra\n"
-"ádiegiama. Ðis veiksmas turëtø keletà minuèiø uþtrukti (tai priklauso nuo\n"
-"ádiegiamø paketø bendro dydþio bei kompiuterio spartos).\n"
-"\n"
-"\n"
-"Praðom turëti kantrybës."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Dabar tu turi pasirinkti, kuriuos skirsnius naudoti tavo naujai Mandrake "
-"Linux \n"
-"sistemai ádiegti. Jei skirsniai jau buvo apibrëþti (ið praeito ádiegimo arba "
-"kitu dalinimo árankiu),\n"
-"tu gali naudoti esanèius skirsnius. Kitu atveju, skirsniai turi bûti "
-"apibrëþti.\n"
-"\n"
-"\n"
-"Kad sukurtum skirsnius, tu pirmiausia turi pasirinkti kietàjá diskà. Diskà "
-"dalinimui\n"
-"gali pasirinkti, paspaudæs ant \"hda\" jei nori pirmo IDE kaupiklio, \"hdb\" "
-"-- antro,\n"
-"arba \"sda\", jei renkiesi pirmàjá SCSI kaupiklá ir t.t.\n"
-"\n"
-"\n"
-"Kad sudalintum skirsniais pasirinktà kietàjá diskà, gali naudotis vienu ið "
-"ðiø variantø:\n"
-"\n"
-"   * Iðvalyti viskà: ðis variantas iðtrina visus skirsnius, esanèius "
-"pasirinktame kietajame diske.\n"
-"\n"
-"\n"
-"    * Automatiðkai paskirti: ðis variantas leidþia automatiðkai sukurti Ext2 "
-"bei swap skirsnius laisvoje tavo\n"
-"     disko vietoje.\n"
-"\n"
-"\n"
-"   * Iðgelbëti skirsniø lentelæ: jei disko skirsniø lentelë yra sugadinta, "
-"tu gali bandyti atstatyti jà su ðiuo variantu.\n"
-"     Bûk atsargus ir prisimink, kad tai gali nepavykti.\n"
-"\n"
-"\n"
-"   * Atðaukti: tu gali naudoti ðá variantà, kad atðauktum visus tavo "
-"pakeitimus.\n"
-"\n"
-"\n"
-"   * Ið naujo: tu gali rinktis ðá variantà, kad atsisakytum visø savo "
-"pakeitimø ir ákeltum pradinæ skirsniø lentelæ.\n"
-"\n"
-"\n"
-"   * Meistras: jei tu nori, kad meistras tau padëtø sudalinti kietàjá diskà, "
-"rinkis ðá variantà. Tai rekomenduojama, jeigu\n"
-"     tu nelabai iðmanai apie skirsniø dalinimà.\n"
-"\n"
-"\n"
-"   * Atkurti ið diskelio: jei tu iðsaugojai savo skirsniø lentelæ á diskelá "
-"ádiegdamas praeità kartà, tu gali atkurti jà\n"
-"     naudodamasis ðiuo variantu.\n"
-"\n"
-"\n"
-"   * Iðsaugoti á diskelá: jei tu nori iðsaugoti savo skirsniø lentelæ á "
-"diskelá, kad galëtum paskui atkurti jà, rinkis ðá\n"
-"     variantà. labai rekomenduojama, kad tu tai padarytum.\n"
-"\n"
-"\n"
-"   * Atlikta: jei tu baigei dalinti savo kietàjá diskà, rinkis ðá variantà, "
-"kad iðsaugotum visus pakeitimus.\n"
-"\n"
-"\n"
-"Tavo þiniai, tu gali pasiekti bet kurá variantà naudodamasis klaviatûra: "
-"vaikðèiok tarp skirsniø su Tab bei\n"
-"Aukðtyn/Þemyn rodyklëmis.\n"
-"\n"
-"\n"
-"Kai skirsnis yra parinktas, gali naudoti:\n"
-"\n"
-"* Ctrl-c kad sukurtum naujà skirsná (jei parinktas tuðèias skirsnis)\n"
-"\n"
-"* Ctrl-d kad iðtrintum skirsná.\n"
-"\n"
-"* Ctrl-m kad nurodytum prijungimà taðkà."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Tavo kietajame diske buvo aptiktas vienas ar daugiau Microsoft Windows\n"
-"skirsnis. Praðom pasirinkti, kurio ið jø dydá nori pakeisti, kad ádiegtum "
-"savo\n"
-"naujàjà Mandrake Linux operacijø sistemà.\n"
-"\n"
-"\n"
-"Tavo þiniai, kiekvienas skirsnis sàraðe uþraðomas pavidalu \"Linux "
-"pavadinimas\",\n"
-"\"Windows pavadinimas\" \"Talpa\".\n"
-"\n"
-"\"Linux pavadinimas\" sudaromas taip: \"kaupiklio tipas\", \"kaupiklio "
-"numeris\",\n"
-"\"skirsnio numeris\" (pavyzdþiui \"hda1\").\n"
-"\n"
-"\"Kieto disko tipas\" yra \"hd\", jei tavo kietasis kaupiklis yra IDE tipo, "
-"ir \"sd\", jeigu\n"
-"tai SCSI kaupiklis.\n"
-"\n"
-"\n"
-"\"Kaupiklio numeris\" visada yra raidë po \"sd\" arba \"hd\". IDE "
-"kaupikliams:\n"
-"\n"
-"   * \"a\" reiðkia \"pagrindinis (master) diskas, prijungtas prie pirmojo "
-"(primary) IDE valdiklio\",\n"
-"\n"
-"   * \"b\" reiðkia \"ðalutinis (slave) diskas, prijungtas prie pirmojo IDE "
-"valdiklio\",\n"
-"\n"
-"   * \"c\" reiðkia \"pagrindinis diskas, prijungtas prie antrojo (secondary) "
-"IDE valdiklio\",\n"
-"\n"
-"   * \"d\" reiðkia \"ðalutinis diskas, prijungtas prie antrojo IDE valdiklio"
-"\",\n"
-"\n"
-"\n"
-"Su SCSI kaupikliais, \"a\" reiðkia \"pirmasis diskas\", \"b\" reiðkia "
-"\"antrasis diskas\" ir t.t.\n"
-"\n"
-"\n"
-"\"Windows pavadinimas\" yra raidë, kuria tas skirsnis buvo vadinamas "
-"Windows'uose\n"
-"(pirmasis disko skirsnis vadinamas \"C:\")"
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Praðom turëti kantrybës. Ðis veiksmas gali keletà minuèiø uþtrukti."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Praðom pasirinkti ¥Ádiegti´, jei á sistemà nëra ádiegta ankstesniø Mandrake "
-"Linux versijø,\n"
-"arba jei nori naudoti kelias operacijø sistemas.\n"
-"\n"
-"Praðom pasirinkti ¥Atnaujinti´, jei nori atnaujinti jau ádiegtà Mandrake "
-"Linux versijà.\n"
-"\n"
-"\n"
-"Priklausomai nuo tavo þiniø apie GNU/Linux, tu gali pasirinkti ðias klases "
-"ádiegti ar atnaujinti \n"
-"Mandrake Linux operacijø sistemà:\n"
-"\n"
-"* Rekomenduojama: jei niekad nesi ádiegæs GNU/Linux operacijø sistemos, "
-"pasirink ðià. Ádiegimas bus labai\n"
-"  lengvas, tavæs bus paklausta tik keletas klausimø.\n"
-"\n"
-"\n"
-"* Prisitaikyta: jei esi pakankamai susipaþinæs su GNU/Linux, tu gali "
-"pasirinkti pagrindinæ sistemos paskirtá\n"
-"(darbo stotis, serveris, kûrimo). Tu turësi atsakyti á daugiau klausimø, nei "
-"¥Rekomenduojamoje´ ádiegimo\n"
-"klasëje, taigi turi þinoti, kaip veikia GNU/Linux, kad pasirinktum ðià "
-"klasæ.\n"
-"\n"
-"\n"
-"* Eksperto: jei gerai iðmanai GNU/Linux, gali pasirinkti ðià ádiegimo klasæ. "
-"kaip ir ¥Prisitaikytoje´ klasëje,\n"
-"  tu galësi pasirinkti pagrindinæ sistemos paskirtá\t(darbo stotis, "
-"serveris, kûrimo). Bûk labai atsargus, prieð \n"
-"  pasirinkdamas ðià ádiegimo klasæ. Tu galësi atlikti smarkiai prisitaikytà "
-"ádiegimà.\n"
-"  Atsakyti á kai kuriuos klausimus gali bûti itin sudëtinga, jei gerai "
-"neiðmanai GNU/Linux. Taigi, nesirink ðios\n"
-"  ádiegimo klasës, nebent tikrai þinai, kà darai."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Praðom pasirinkti teisingà prievadà. Pavyzdþiui COM1\n"
-"MS Windows'uose vadinamas ttyS0 GNU/Linux'e."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) ir GRUB yra ákrovos tvarkyklës: jos gali ákrauti\n"
-"tiek GNU/Linux, tiek bet kokià kità operacijø sistemà, esanèià\n"
-"kompiuteryje. Paprastai tos kitos operacijø sistemos yra teisingai\n"
-"atpaþástamos ir ádiegiamos. Jeigu ne, tu gali pridëti áraðus pats ðiame\n"
-"lange. Bûk atidus ir pasirink teisingus parametrus.\n"
-"\n"
-"\n"
-"Tu taip pat gali uþdrausti priëjimà prie tø kitø operacijø sistemø\n"
-"bet kam, jei iðtrinsi atitinkamus áraðus. Bet tuo atveju, tau prireiks\n"
-"ákrovos diskelio, kad jas ákrautum!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Tu turi nurodyti, kur áraðyti GNU/Linux paleidimui reikalingà informacijà\n"
-"\n"
-"\n"
-"Jeigu tu tiksliai neþinai, kà darai, pasirink \"Pirmasis kaupiklio sektorius "
-"(MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX bandys surasti PCI SCSI adapterá(-ius). Jei DrakX\n"
-"ras SCSI adapterá ir þinos, kokià tvarkyklæ naudoti, ji bus automatiðkai\n"
-"ádiegta.\n"
-"\n"
-"\n"
-"Jei tu neturi SCSI adapterio, turi ISA SCSI adapterá ar PCI SCSI adapterá,\n"
-"kurio DrakX nepaþásta, tavæs bus paklausta, ar sistemoje yra SCSI\n"
-"adapteris. Jei nëra në vieno, gali spausti ¥Ne´. Jei paspausi ¥Taip´, bus\n"
-"parodytas tvarkykliø sàraðas, ið kurio galësi pasirinkti tinkamà savo\n"
-"adapteriui.\n"
-"\n"
-"\n"
-"Jei tau teks rankomis nurodyti savo adapterá, DrakX papraðys tavæs\n"
-"nurodyti jo nuostatas. Tu turëtum leisti DrakX bandyti atpaþinti árangos\n"
-"nuostatas. Daþniausiai tai suveikia.\n"
-"\n"
-"\n"
-"Jei ne, tau teks nurodyti tvarkyklës nuostatas. Praðom perþiûrëti User "
-"Guide\n"
-"(chapter 3, section \"Collective informations on your hardware\") dël "
-"patarimø,\n"
-"kaip suþinoti informacijà apie árangos dokumentacijà, ið gamintojo "
-"svetainës\n"
-"tinkle (jei turi priëjimà prie interneto) arba ið Microsoft Windows (jei "
-"turi juos\n"
-"savo sistemoje)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot yra NewWorld MacIntosh geleþies ákrovos programa. Ji gali\n"
-"ákrauti GNU/Linux, MacOS, arba MacOSX (jeigu egzistuoja jûsø kompiuteryje).\n"
-"Paprastai ðios operacinës sistemos aptinkamos ir ádiegiamos\n"
-"normaliai. Jeigu taip neávyko galite ðiame ekrane sukurti áraðà rankiniu "
-"bûdu.\n"
-"Bûkite atsargûs pasirinkdami parametrus.\n"
-"\n"
-"\n"
-"Pagrindiniai Yaboot nustatymai yra:\n"
-"\n"
-"\n"
-"  - Init Message: Praneðimas parodomas prieð ákrovà.\n"
-"\n"
-"\n"
-"\n"
-"  - Boot Device: Nurodykite kur padëti informacija kurios reikësto \n"
-"ákrauti GNU/Linux. Bendrai tariant jûs jau turëjote sukurti bootstrap "
-"skirsná \n"
-"kuri laikys ðià informacijà.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Skirtingai nuo LILO yaboot turi dvi pauzes\n"
-"Pirmoji pauzë matuojamas sekundëmis. Èia galite pasirinkti\n"
-"tarp CD, OF ákrova, MacOS, arba Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: Ðis uþlaikymas panaðus á LILO ákrovos pauzæ.  "
-"Pasirinkë \n"
-"Linux jus turësite ðià pauzæ 0.1 sekundës dalimis prieð pasirenkantkernelio\n"
-"apraðymà.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Pasirinkdami ðá nustatymà jums leis pasirinkti 'C' "
-"iðCD \n"
-"pirmoje ákrovos uþklausoje.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Pasirinkus ðá nustatymà jums leis pasirinkti 'N' Open\n"
-"Firmware pirmoje ákrovos uþklausoje.\n"
-"\n"
-"\n"
-"  - Default OS: Galite pasirinkti kuri OS ásikraus pagal nutylëjimà kai "
-"baigsis Open Firmware \n"
-"uþlaikymas."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Pasirink kietàjá diskà, kurá nori iðtuðtinti, kad ádiegtum naujà\n"
-"Mandrake Linux sistemà. Bûk atsargus, visi duomenys, esantys jame, bus\n"
-"prarasti, ir jø nebebus ámanoma atkurti."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Spausk \"Gerai\", jei nori iðtrinti visus duomenis ir skirsnius, esanèius\n"
-"ðiame kietajame diske. Bûk atsargus, kai paspausi \"Gerai\", tu nebegalësi\n"
-"atkurti jokiø duomenø nei skirsniø, kurie buvo ðiame diske, áskaitant bet\n"
-"kokius Windows duomenis.\n"
-"\n"
-"\n"
-"Spausk \"Atðaukti\", kad nutrauktum operacijà ir neprarastum jokiø duomenø\n"
-"nei skirsniø, esanèiø ðiame kietajame diske."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Negalima naudoti transliavimo be NIS domeno"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ádëk FAT formatuotà diskelá á kaupiklá %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Kad iðsaugoti ðiø paketø pasirinkimà ákraukite sistemà su ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Klaida skaitant bylà %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Kad kai kurie tavo kompiuterio árenginiai veiktø, jiems reikia\n"
-"taip vadinamø \"proprietary\" tvarkykliø. daugiau informacijos apie jas "
-"gali\n"
-"rasti èia: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Tu turi turëti root skirsná. Tam sukurk skirsná\n"
-"(arba spragtelëk ant jau esamo). Tada pasirink\n"
-"veiksmà ¥Montavimo taðkas´ ir nurodyk jam ¥/´"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Tu privalai turëti swap skirsná"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Tu neturi swap skirsnio\n"
-"\n"
-"Vis tiek tæsti?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Tu privalai turëti swap skirsná"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Naudoti laisvà vietà"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Naujiems skirsniams nepakanka laisvos vietos"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Naudoti esamà skirsná"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nëra jokio skirsnio, tinkamo naudojimui"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Naudoti Windows skirsná loopback'ui"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kuri skirsná tu nori naudoti Linux4Win ádiegimui?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Pasirink dydþius"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ðakninio skirsnio dydis, MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap skirsnio dydis, MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Naudoti laisvà vietà Windows skirsnyje"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kurio skirsnio dydá tu nori pakeisti?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Skaièiuojami Windows bylø sistemos rëþiai"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT dydþio keitimo programa nesusitvarko su tavo\n"
-"skirsniu, ávyko tokia klaida: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Tavo Windows skirsnis yra pernelyg fragmentuotas, pirma paleisk ¥defrag´"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"PERSPËJIMAS!\n"
-"\n"
-"DrakX dabar pakeis tavo Windows skirsnio dydá. Bûk atsargus: ðis veiksmas\n"
-"yra pavojingas. Jeigu to dar nepadarei, dabar pats laikas iðeiti ið "
-"ádiegimo,\n"
-"paleisti scandisk ið Windows (nepakenktø ir defrag paleisti), o tada ið "
-"naujo\n"
-"pradëti ádiegimà. Taip pat turëtum pasidaryti atsarginæ duomenø kopijà.\n"
-"Kai viskas sutvarkyta, spausk Gerai."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koká dydá norëtum palikti Windows'ams"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "skirsnyje %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Nepavyko pakeisti FAT dydþio: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nëra jokiø FAT skirsniø, kuriø dydá bûtø galima pakeisti arba naudoti juos "
-"loopback'ui\n"
-"(arba nëra pakankamai laisvos vietos)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Iðtrinti visà diskà"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Iðmesti Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tu turi daugiau negu vienà kietà diskà, á kurá nori ádiegti Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VISI kaupiklyje %s esantys skirsniai ir duomenys bus prarasti"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Rankinis diskø skirstymas"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Naudoti fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Tu dabar gali sudalinti %s.\n"
-"Kai baigsi, nepamirðk iðsaugoti su 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Windows skirsnyje nëra pakankamai laisvos vietos"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Að niekur negaliu rasti vietos ádiegimui"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Skirsniø dalinimo meistras rado tokius sprendimus:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dalinimas á skirsnius nepavyko: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Paleidþiamas tinklas"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Iðjungiamas tinklas"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ávyko klaida, bet að neþinau, kaip su ja graþiai susitvarkyti.\n"
-"Tæsk darbà savo paties rizika."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pasikartojantis montavimo taðkas %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Kai kurie svarbûs paketai nebuvo tvarkingai ádiegti.\n"
-"Arba tavo CD-ROM kaupiklis, arba CD yra su trûkumais.\n"
-"Patikrink CD ádiegtame kompiuteryje, naudodamas \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Sveiki atvykæ á %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Neprieinamas në vienas diskeliø kaupiklis"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Áeinama á þingsná ¥%s´\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Tavo sistemoje maþai resursø. Tu gali susidurti su bëdomis, ádiegdamas\n"
-"Mandrake Linux. Jei taip atsitiktø, gali pabandyti tekstiná diegimo bûdà:\n"
-"Kai uþsikrauna ið CDROM'o, paspausk `F1', o tada ávesk \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Ádiegimo klasë"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Praðom pasirinkti vienà ið ðiø ádiegimo klasiø:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Grupiø, kurias tu pasirinkai, bendras dydis yra apie %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jei tu nori ádiegti maþiau, nei èia nurodyta,\n"
-"pasirink, kiek procentø paketø tu norëtum ádiegti.\n"
-"\n"
-"Jei procentø maþai, bus ádiegti tik patys svarbiausi paketai;\n"
-"su 100% bus ádiegti visi paþymëti paketai."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tu turi vietos diske tik %d%% ðiø paketø.\n"
-"\n"
-"Jei tu nori ádiegti maþiau, nei èia nurodyta,\n"
-"pasirink, kiek procentø paketø tu norëtum ádiegti.\n"
-"Jei procentø maþai, bus ádiegti tik patys svarbiausi paketai;\n"
-"su %d%% bus ádiegtà tiek paketø, kiek tik ámanoma."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sekanèiame þingsnyje tu juos galësi pasirinkti tiksliau."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Kiek procentø paketø ádiegti"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paketø grupiø pasirinkimas"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Atskirø paketø pasirinkimas"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Bendras dydis: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Blogas paketas"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Pavadinimas: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Dydis: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Svarba: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Tu negali pasirinkti ðio paketo, kadangi nebëra pakankamai vietos jam ádiegti"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ruoðiamasi ádiegti ðiuos paketus"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ruoðiamasi paðalinti ðiuos paketus"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Tu negali paþymëti/atþymëti ðio paketo"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Tai yra privalomas paketas, jis negali bûti atþymëtas"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Tu negali atþymëti ðio paketo. Jis jau yra ádiegtas"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ðis paketas privalo bûti atnaujintas\n"
-"Ar tu tikrai nori já atþymëti?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tu negali atþymëti ðio paketo. Jis privalo bûti atnaujintas"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Ádiegti"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Iðsaugoti á diskelá"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Iðsaugoti paketø pasirinkimà"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Iðmesti"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Ádiegiama"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Skaièiuojama"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Liko laiko "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Praðome palaukti. Ruoðiamas ádiegimas"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketø"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Ádiegiamas paketas %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Sutinku"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Atmetu"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Pakeisk CD!\n"
-"\n"
-"Praðom ákiðti CD su uþraðu ¥%s´ á kaupiklá, tada paspausk Gerai.\n"
-"Jei tu jo neturi, spausk Nutraukti, kad iðvengtum ádiegimo ið ðio CD."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Vis tiek tæsti?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Ávyko klaida, bandant sutvarkyti paketus:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Ávyko klaida, ádiegiant paketus:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Perspëjimas\n"
-"\n"
-"Praðau ádëmiai perskaityti ðá susitarimà. Jeigu jûs nesutinkate nors\n"
-"su vienu kunktu jums neleidþiama naudoti ðios laikmenos. Paspauskite "
-"'Atmetu', \n"
-"kad tæsti ádiegimà be ðios laikmenos.\n"
-"\n"
-"\n"
-"Kaikurie CD esantys komponentai nëra paþymëti \n"
-"GPL Licenzija ar kaþkuo panaðiu. Tokiu atveju kiekvienas\n"
-"komponentas turi savo licenzijà. \n"
-"Praðau pirmiau perskaityti ir sutikti su tomis licenzijomis prieð \n"
-"naudojant arba perduodant tuos komponentus. \n"
-"Tokios licenzijos bandrai sulaiko komponentø perdavimà, kopijavimà \n"
-"(iðskyrus rezervinæ kopijà), atvirkðtinæ inþinerijà, \n"
-"de-assembly, de-compilation arba modifikavimà. \n"
-"Bet koks susitarimo lauþymas atima ið jûsø visas ðios licenzijos suteiktas\n"
-"teises. Jeigu jums speciali licenzija nesuteikia ápatinkø ágaliojimø\n"
-"jûs negalite ádiegti ðiø programø á daugiau negu vienà kompiuterá\n"
-"arba pritaikyti naudoti tinkle. Jei abejojate\n"
-"susisiekite tiesiai su gamintoju. \n"
-"Ðiø komponentø arba dokumentacijos  perdavimas treèioms ðalims\n"
-"yra uþdraustas.\n"
-"\n"
-"\n"
-"Visos CD diske esanèiø komponentø teisës priklauso gerbiamiems\n"
-"jø autoriams ir saugomos intelektualios nuosavybës teises\n"
-"sauganèiø ástatymø.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ávyko klaida"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Ar tu nori ið naujo paleisti tinklà"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licenzijos patvirtinimas"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatûra"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Praðom pasirinkti klaviatûros iðdëstymà."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Èia yra galimø klaviatûrø sàraðas"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kurios Ádiegimo klasës tu nori?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Ádiegti/Atnaujinti"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ar tai ádiegimas, ar atnaujinimas?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Rekomenduojama"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Eksperto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Atnaujinimas"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Iðsaugoti paketø pasirinkimà"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Praðom pasirinkti savo pelës rûðá."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Pelës prievadas"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Praðom pasirinkti, prie kurios nuosekliosios jungties prijungta tavo pelë."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Nustatomos PCMCIA plokðtes..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Nustatome IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nëra prieinamø skirsniø"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Perþiûrimi skirsniai, ieðkant montavimo taðkø"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Pasirink montavimo taðkus"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Að negaliu perskaityti skirsniø lentelës, ji pernelyg sugadinta :(\n"
-"Galiu pabandyti iðvalyti blogus skirsnius (VISI DUOMENYS bus prarasti!)\n"
-"Kitas sprendimas -- neleisti DrakX taisyti skirsniø lentelæ.\n"
-"(klaida %s)\n"
-"\n"
-"Ar sutinki prarasti visus skirsnius?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nesugebëjo teisingai perskaityti skirsniø lentelës.\n"
-"Tæsk savo paties rizika!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Nerastas pagrindinis skirsnis"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Ðakninis skirsnis"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kur yra tavo sistemos ðakninis skirsnis (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Tau reikia perkrauti kompiuterá, kad skirsniø lentelës pakeitimai bûtø "
-"naudojami"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Pasirink skirsnius, kuriuos nori suþymëti"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ieðkoti blogø blokø?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Suþymimi skirsniai"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Sukuriama ir suþymima byla %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nepakanka swap atminties ádiegimo vykdymui, praðom praplësti"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ieðkomi galimi paketai"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ieðkoma atnaujintinø paketø"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Tavo sistemoje neuþtenka vietos ádiegimui arba atnaujinimui (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pilnai (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaliai (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekomenduojama (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Atstatyti ið diskelio"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Atstatyti ið diskelio"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Paketø grupiø pasirinkimas"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Ádëk diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Iðsaugoti á diskelá"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Pasirink paketà ádiegimui"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Palauk"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jei turi visus CD þemiau esanèiame sàraðe, spausk Gerai.\n"
-"Jei neturi në vieno ið ðiø CD, spausk Nutraukti.\n"
-"Jei trûksta tik kai kuriø CD, atþymëk juos, o tada spausk Gerai."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM su uþraðu \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ruoðiamas ádiegimas"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Ádiegiamas paketas %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfigûracija po ádiegimo"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ádëk diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ádëk tuðèià diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Dabar jûs turite galimybæ parsisiøsti ðiravimo programà.\n"
-"\"nPERSPËJIMAS:\n"
-"Dël áviariø programiniø juridiniø, teisiniø ir kitø prieþaðèiø jums\n"
-"reikia ásitikinti kad jûs galite parsisiøsti ir naudoti ðità programinæ\n"
-"árangà\n"
-"\n"
-"Prieð vartotojus kurie nesilaikys atitinkamø ástatymø bus gali bûti\n"
-"imtasi sankcijø\n"
-"Mandrakesoft neatsako uþ netiesioginæ arba atsitiktinis arba koks nors\n"
-"kitokià þalà.\n"
-"\n"
-"D4l i6kilusi7 klausim7 susisiekite su: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Jungiamasi prie atvaizdþio (mirror), kad gautume prieinamø paketø sàraðà"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Pasirink atvaizdá (mirror), ið kurio imti paketus"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Jungiamasi prie atvaizdþio (mirror), kad gautume prieinamø paketø sàraðà"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Kokia tavo laiko juosta?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Ar tavo árangos laikrodis nustatytas GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Nutolæs CUPS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Spausdintuvo nëra"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Ar turi dar vienà?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Apibendrinimas"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Pelë"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Laiko juosta"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Spausdintuvas"
-
-#: ../../install_steps_interactive.pm_.c:1049
-#, fuzzy
-msgid "ISDN card"
-msgstr "Vidinë ISDN plokðtë"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-#, fuzzy
-msgid "Sound card"
-msgstr "Standartinë"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Naudoti NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Nurodyti root slaptaþodá"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Jokio slaptaþodþio"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ðis slaptaþodis yra pernelyg paprastas (turi bûti bent %d simboliø ilgio)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "serveris"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentikacijos NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domenas"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ákrovos diskelis leidþia pakrauti Linux sistemà be normalaus sistemos "
-"ákroviklio.\n"
-"Tai gali bûti naudinga, jei tu nenori ádiegti SILO á savo sistemà, arba "
-"kita\n"
-"operacijø sistema iðmeta SILO, arba jei SILO nedirba su tokia árangos "
-"konfigûracija.\n"
-"Ákrovos diskelis taip pat gali bûti naudojamas su Mandrake rescue diskeliu, "
-"tokiu\n"
-"bûdu pasidaro daug lengviau atkurti sistemà po smarkiø gedimø.\n"
-"\n"
-"Jei nori sukurti ákrovos diskelá savo sistemai, ákiðk diskelá á pirmàjá\n"
-"árenginá ir spausk \"Gerai\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Pirmasis diskeliø árenginys"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Antrasis diskeliø árenginys"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Praleisti"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ákrovos diskelis leidþia pakrauti Linux sistemà be normalaus sistemos "
-"ákroviklio.\n"
-"Tai gali bûti naudinga, jeigu tu nenori ádiegti LILO (arba GRUB) á savo "
-"sistemà,\n"
-"arba jei kita operacijø sistema iðmeta LILO, arba jei LILO nedirba su esama "
-"árangos\n"
-"konfigûracija. Ákrovos diskelis taip pat gali bûti naudojamas su Mandrake "
-"rescue\n"
-"diskeliu, tokiu bûdu pasidaro daug lengviau atkurti sistemà po smarkiø "
-"gedimø.\n"
-"\n"
-"Ar tu nori sukurti ákrovos diskelá?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Atleisk, bet neradau jokio diskeliø kaupiklio"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Pasirink kaupiklá, kurá nori naudoti ákrovos diskeliui sukurti"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ádëk diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Kuriamas ákrovos diskelis"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ruoðiama ákrovos tvarkyklë"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ar nori naudoti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Klaida ádiegiant aboot,\n"
-"bandyti ádiegti priverstinai, net jei tai sunaikintø pirmàjá skirsná?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Ádiegti ákrovos tvarkyklæ"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Nepavyko ádiegti ákrovos tvarkyklës. Ávyko tokia klaida:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ádëk tuðèià diskelá á kaupiklá %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Kuriamas automatinio ádiegimo diskelis"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Kai þingsniai buvo nebaigti.\n"
-"\n"
-"Ar tu nori iðeiti dabar?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Sveikiname. Ádiegimas baigtas.\n"
-"Iðtrauk ádiegimo laikmenas ir spausk Enter, kad perkrautum.\n"
-"\n"
-"\n"
-"Kad suþinotum apie pataisymus, kurie prieinami ðiai Mandrake Linux laidai,\n"
-"pasiþiûrëk á Errata, kuris yra \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacija apie tavo sistemos konfigûravimà yra oficialioje\n"
-"Mandrake Linux User's Guide knygoje."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Sukurti automatinio ádiegimo diskelá"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatinis ádiegimas reikalui esant gali bûti pilnai\n"
-"automatizuotas. Tokiu atveju jis uþims visà diskà!!\n"
-"(turint omenyje ádiegimà á kità dëþæ).\n"
-"\n"
-"Jûs galbût norësite pakartoti ádiegimà.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatinis"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Parodyti vël"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Iðsaugoti paketø pasirinkimà"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ádiegimas %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> tarp elementø  | <Tarpas> parenka | <F12> kitas langas "
-
-#: ../../interactive.pm_.c:87
-#, fuzzy
-msgid "kdesu missing"
-msgstr "nieko"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Pasirink veiksmà"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Iðplëstinis"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Praðom palaukti"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Iðskleisti medá"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Suskleisti medá"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Perjungti tarp rikiavimo pagal grupes ar abëcëlæ"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Blogas pasirinkimas, bandyk vël\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Tavo pasirinkimas? (pagal nutylëjimà %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Tavo pasirinkimas? (pagal nutylëjimà %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Pasirinktys: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Ar nori naudoti aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Tavo pasirinkimas? (pagal nutylëjimà %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Èekø (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Vokieèiø"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorako"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Ispanø"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Suomiø"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Prancûzø"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvegø"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Lenkø"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusø"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Ðvedø"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Jungtinës karalystës klaviatûra"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "JAV klaviatûra"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iranieèiø"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armënø (senoji)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armënø (spausd. maðinëlës)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armënø (fonetinë)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidþanieèiø (lotyniðka)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgø"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armënø (fonetinë)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarø"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilø (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Baltarusiø"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Ðveicarø (Vokiðkas iðdëstymas)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Ðveicarø. (Prancûziðkas iðdëstymas)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Èekø (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Vokieèiø (be mirusiø klaviðø)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danø"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorako (JAV)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorako (Norvegø)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorako (JAV)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estø"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzinø (\"Rusiðkas\" iðdëstymas)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzinø (\"Latin\" iðdëstymas)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Graikø"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Vengrø"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatø"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelio"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Þydø (Fonetinë)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranieèiø"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandø"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italø"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japoniðka 106 klaviðø"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Jungtinës karalystës klaviatûra"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lotynø Amerikos"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lietuviø ÀÞERTY (sena)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lietuviø ÀÞERTY (nauja)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lietuviø \"skaièiø eilë\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lietuviø \"fonetinë\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Vieta"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonieèiø"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Olandø"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Lenkø (QWERTY iðdëstymas)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Lenkø (QWERTZ iðdëstymas)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalø"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadieèiø (Kvebeko)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusiðka (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusiðka (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusiðka (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovënø"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakø (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakø (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidþanieèiø (kirilica)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Lentelë"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai klaviatûra"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai klaviatûra"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkø (tradicinis \"F\" modelis)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkø (ðiuolaikinis \"Q\" modelis)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainieèiø"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "JAV klaviatûra (tarptautinë)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamieèiø \"skaièiø eilë\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavø (lotyniðkas/kirilikos)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Loopback montavimai %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Pirmiausia iðmeskite loginius tomus\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - pelë"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Paprasta PS2 pelë su ratuku"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-#, fuzzy
-msgid "1 button"
-msgstr "2 klaviðø"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Paprasta 2 klaviðø pelë"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Paprasta"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Su ratuku"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "nuoseklioji"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Paprasta 3 klaviðø pelë"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (nuoseklioji, seno C7 tipo)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 klaviðø"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 klaviðø"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "jokios"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Pelës nëra"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Praðom iðbandyti pelæ"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Kad suþadintum pelæ,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "PASUK RATUKÀ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Suomiø"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Toliau ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Ankstesnis"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ar taip teisinga?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Prisijungti prie interneto"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Labiausiai paplitæs bûdas prisijungti su ADSL yra pppoe.\n"
-"Vis dëlto, kai kurios jungtys gali naudoti PPTP arba DHCP.\n"
-"Jei neþinai, pasirink 'naudoti pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "naudoti dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "naudoti pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "naudoti pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kurá DHCP klientà norëtum naudoti?\n"
-"Áprasta yra dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Neradau jokio ethernet tinklo adapterio tavo sistemoje.\n"
-"Að negaliu sutvarkyti ðio jungties tipo."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Pasirink tinklo interfeisà"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Praðom pasirinkti, kurià tinklo plokðtæ tu nori naudoti prisijungimui prie "
-"interneto"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nerasta jokia tinklo plokðtë"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigûruojamas tinklas"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Praðom ávesti savo hosto vardà, jei já þinai.\n"
-"Kai kuriems DHCP reikia, kad hosto vardas galiotø.\n"
-"tai turëtø bûti pilnai apraðytas hosto vardas, panaðus\n"
-"á \"mano.filialas.istaiga.lt\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Hosto vardas"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Tinklo Konfigûravimo Meistras"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Iðorinë ISDN plokðtë"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Vidinë ISDN plokðtë"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kokios rûðies tavo ISDN jungtis?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfigûravimas"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Pasirink savo tiekëjà.\n"
-" Jei jo nëra sàraðe, pasirink Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Ákrovos Protokolas"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Likæs pasaulis"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Likæs pasaulis \n"
-" be D-Channel (nuomojamos linijos)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Kurá protokolà nori naudoti?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kokios rûðies plokðtæ tu turi?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Neþinau"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jei tu turi ISA plokðtæ, reikðmës sekanèiame ekrane turëtø bûti teisingos.\n"
-"\n"
-"Jei turi PCMCIA plokðtæ, tu turi þinoti jos IRQ bei IO.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Nutraukti"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Tæsti"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kuri yra tavo ISDN plokðtë?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Að aptikau ISDN PCI plokðtæ, taèiau neþinau jos tipo. Pasirink vienà PCI "
-"plokðtæ sekanèiame ekrane."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Jokia ISDN PCI plokðtë nerasta. praðom pasirinkti vienà kitame ekrane."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Praðom pasirinkti, prie kurios nuosekliosios jungties yra prijungtas tavo "
-"modemas."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Prisiskambinimo nustatymai"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Jungties pavadinimas"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefono numeris"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Pasisveikinimo ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Paremtas skriptu"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Paremtas terminalu"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeno vardas"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Pirmasis DNS serveris"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Antrasis DNS serveris"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Tu dabar esi prisijungæs prie interneto."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Tu gali prisijungti prie interneto arba ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Tu dabar nesi prisijungæs prie interneto."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Sujungimas..."
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Sujungimas..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Nustatyti tinklà"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interneto jungtis ir nustatymas"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Tu gali atsijungti arba ið naujo nustatyti jungtá."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Tinklo konfigûravimas"
-
-#: ../../network/netconnect.pm_.c:139
-#, fuzzy
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Kadangi jûs diegiate per tinklà jûsø tinklo nustatymai yra padaryti.\n"
-"Spragtelëkite ant Gerai kad perkonfiguruoti Network/Internet pasijungimà "
-"arbaatðaukti, kad praleisti ðá punktà.\n"
-
-#: ../../network/netconnect.pm_.c:165
-#, fuzzy
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Internet Pasijungimas\n"
-"\n"
-"Mes ruoðiamës konfiguruoti jûsø internet/tinkliná pasijungimà.\n"
-"Jeigu nenorite naudoti automatinio aptikimo nuimkite ðià atþymà.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Konfiguravimui pasirinkite prifailà"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Naudokite automatiná aptikimà"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Ieðkoma áranga..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Nustatyti normalià jungtá per modemà"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "aptiktas prievade %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN jungtis"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "aptiktas %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN jungtis"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "aptiktas interfeise %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelinë jungtis"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabelinë jungtis"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN jungtis"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "aptiktos ethernet kortos(a)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Pasirink kurá áranká norëtum naudoti"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Ar tu nori prisijungti tik ájungus?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Tinklo konfigûravimas"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Ar tu nori ið naujo paleisti tinklà"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Sveikiname, jûsø tinklo ir Internet konfiguracija baigta.\n"
-"\n"
-"Dabar konfiguracijà pritaikysime sistemai.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Po to rekomenduojame jums perleisti X aplinkà,\n"
-"kad iðvengti problemø su kompiuterio vardu."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"PERSPËJIMAS: Gis árenginys jau anksèiau buvo sutvarkytas prisijungimui prie\n"
-"interneto. \n"
-"Paprasèiausiai spausk Gerai, jei nori palikti já toká.\n"
-"Jei pakeisi kà nors þemiau esanèiuose laukuose, tai ásigalios vietoj senøjø "
-"nuostatø."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Praðom áraðyti ðio kompiuterio IP konfigûracijà.\n"
-"Kiekvienas laukas turi bûti áraðytas kaip IP adresas\n"
-"deðimtainiais skaièiais su taðkais (pvz. 192.168.2.36)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigûruojamas tinklo árenginys %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (tvarkyklë %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresas"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatinis IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresas turëtø bûti 1.2.3.4 formato"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Praðom ávesti savo hosto vardà, jei já þinai.\n"
-"tai turëtø bûti pilnai apraðytas hosto vardas, panaðus\n"
-"á \"mano.filialas.istaiga.lt\".\n"
-"Taip pat gali ávesti ðliuzo (gateway) IP adresà, jeigu toká turi"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS serveris"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Ðliuzo (gateway) árenginys"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy konfigûracija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy turëtø bûti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy turëtø bûti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneto konfigûravimas"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ar nori pabandyti prisijungti prie interneto dabar?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Iðbandoma jungtis..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistema dabar prijungta prie interneto."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Neatrodo, kad sistema dabar prijungta prie interneto.\n"
-"Bandyk ið naujo konfigûruoti jungtá."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Jungties konfigûravimas"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Praðom uþpildyti arba patikrinti ðá laukelá"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Plokðtës IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Plokðtës mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Plokðtës IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Plokðtës IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Plokðtës IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Tavo asmeninis tel. numeris"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Tiekëjo pavadinimas (pvz. tiekejas.lt)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Tiekëjo telefono numeris"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Tiekëjo DNS 1 (pasirinktinai)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Tiekëjo DNS 2 (pasirinktinai)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Pasirink klaviatûrà"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Skambinimo reþimas"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Jungties tipas: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Jungties tipas: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Pasisveikinimas (vartotojo vardas)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Slaptaþodis"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "primontuoti nepavyko: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Iðplëstiniai skirsniai ðioje platformoje nepalaikomi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Skirsniø lentelëje yra tuðèios vietos, bet ji negali bûti panaudota.\n"
-"Vienintelis sprendimas yra perkelti pirminius skirsnius taip, kad tuðèia "
-"vieta bûtø ðalia iðplëstiniø skirsniø"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Nepavyko atstatyti ið bylos %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Bloga atsarginë byla"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Klaida áraðant á bylà %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Kaþkas blogo nutiko jûsø kaupikliui. \n"
-"Bandymas pabandyti jo vientisumà nepavyko. \n"
-"Tai sako, kad raðymas á já bus visiðkas mëðlas. "
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "turi turëti"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "svarbus"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "labai gerai"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "nuostabu"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "galbût"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Nutolæs CUPS serveris"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Nutolæs lpd serveris"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Tinklo spausdintuvas (TCP/lizdas)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Spausdinimo serveris"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Spausdintuvo árenginio URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Klaida áraðant á bylà %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulis %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS serverio IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Áprastas)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Pasirink spausdintuvo jungtá"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kaip yra prijungtas spausdintuvas?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Su nutolusiu CUPS serveriu, tau ðioje vietoje nereikia nustatinëti\n"
-"jokiø spausdintuvø; jie bus automatiðkai atpaþástami.\n"
-"Jeigu abejoji, pasirink \"Nutolæs CUPS serveris\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Nutolæs CUPS serveris"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresas turëtø bûti 1.2.3.4 formato"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Prievado numeris turi bûti skaièius"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS serverio IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Prievadas"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Ádiegimo Tipo Konfiguracija"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Ieðkoma áranga..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Patikrinti prievadus"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Spausdintuvo nëra"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Naudokite automatiná aptikimà"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "aptiktas %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Spausdintuvo árenginio URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-"Praðom pasirinkti, prie kurios nuosekliosios jungties yra prijungtas tavo "
-"modemas."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Spausdintuvo árenginio URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Nustatymai"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Ádiegiamas paketas %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Ádiegiamas paketas %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Nutolusio lpd spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Norëdamas naudotis nutolusia lpd spausdinimo eile, tu turi\n"
-"nurodyti to serverio hosto vardà ir pavadinimà eilës, kurioje\n"
-"bus talpinami darbai."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nutolusio hosto vardas"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Norëdamas spausdinti á SMB spausdintuvà, tu turi\n"
-"nurodyti SMB hosto vardà, (Atkreipk dëmesá, kad jis gali skirtis nuo\n"
-"jo TCP/IP hosto vardo!) ir galbût spausdinimo serverio IP adresà,\n"
-"spausdintuvo share'o vardà, vartotojo vardà, slaptaþodá ir darbo grupës vardà"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB serverio hostas"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB serverio IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Share'o vardas"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Darbo grupë"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Norëdamas spausdinti á NetWare spausdintuvà, tu turi\n"
-"nurodyti spausdinimo serverio vardà, (Atkreipk dëmesá, kad jis gali\n"
-"skirtis nuo jo TCP/IP hosto vardo!), spausdintuvo eilës vardà "
-"spausdintuvui,\n"
-"prie kurio nori prieiti, bei reikalingus vartotojo vardà ir slaptaþodá."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Spausdinimo serveris"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Spausdinimo eilës pavadinimas"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Lizdinio spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Kad galëtum spausdinti á lizdiná spausdintuvà, turi pateikti\n"
-"spausdintuvo hosto vardà ir, galbût, prievado numerá."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Spausdintuvo hosto vardas"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Spausdintuvo hosto vardas"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Spausdintuvo árenginio URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Spausdintuvo vardas"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Apraðymas"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Vieta"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Ar taip teisinga?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Spausdintuvo jungtis"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kokio tipo yra tavo spausdintuvas?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Modemo Nustatymai"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneto konfigûravimas"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ar tu nori iðbandyti spausdinimà?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Patikrinti prievadus"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Taip, spausdinti abu bandomuosius puslapius"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Spausdintuvas"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standartinë"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Bandomasis puslapis buvo nusiøstas spausdinimo demonui.\n"
-"Kol bus pradëta spausdinti, gali tekti palaukti.\n"
-"Spausdinimo bûsena:\n"
-"%s\n"
-"\n"
-"Ar jis veikia teisingai?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Bandomasis puslapis buvo nusiøstas spausdinimo demonui.\n"
-"Kol bus pradëta spausdinti, gali tekti palaukti.\n"
-"Ar jis veikia teisingai?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Spausdintuvo nëra"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Pelë"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Iðjungiamas tinklas"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Iðjungiamas tinklas"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneto konfigûravimas"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Spausdintuvo nëra"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Nustatyti spausdintuvà"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Iðbandoma jungtis..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Nustatyti tinklà"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitorius nenurodytas"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfigûruojamas tinklas"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kurià spausdinimo sistemà nori naudoti?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Aukðtas"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranojiðkas"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kurià spausdinimo sistemà nori naudoti?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Pasirink spausdintuvo jungtá"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kurià spausdinimo sistemà nori naudoti?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nustatyti spausdintuvà"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Ádiegiamas paketas %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Spausdintuvo nuostatos"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Nustatyti spausdintuvà"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Ar nori nustatyti spausdintuvà?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Èia yra ðios spausdinimo eilës.\n"
-"Tu gali èia pridëti daugiau arba pakeisti esamas."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Èia yra ðios spausdinimo eilës.\n"
-"Tu gali èia pridëti daugiau arba pakeisti esamas."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Nustatyti tinklà"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Normali"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Modemo Nustatymai"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Spausdintuvo jungtis"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Spausdinamas bandomasis puslapis..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Vietinis spausdintuvas"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ar tu nori ið naujo paleisti tinklà"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Skaitoma CUPS tvarkykliø duomenø  bazë"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Proxy konfigûracija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Prievadas"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy turëtø bûti http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Prievado numeris turi bûti skaièius"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy turëtø bûti ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Automatinis pasisveikinimas"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Slaptaþodis"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Jokio slaptaþodþio"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Slaptaþodþiai nesutampa"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Negaliu pridëti skirsnio prie _formatuoto_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Negaliu áraðyti bylos %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nepavyko"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nepavyko (gal bût trûksta raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nëra pakankamai srièiø %d lygio RAID\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron yra periodinë komandø tvarkyklë."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd naudojamas akumuliatoriaus bûsenai stebëti ir uþraðyti per\n"
-"syslog. Jis taip pat gali bûti naudojamas kompiuterio iðjungti,\n"
-"kai trûksta energijos akumuliatoriuje."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Paleidþia komandas laiku, nurodytu su at komanda, bei paleidþia\n"
-"susikaupusias komandas tuomet, kai sistema maþai apkrauta."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron yra standartinë UNIX programa, paleidþianti vartotojo nurodytas "
-"programas\n"
-"periodiðkai, nustatytu laiku. vixie cron prideda nemaþai galimybiø prie "
-"paprasto\n"
-"UNIX cron'o, áskaitant didesná saugumà ir galingesnes parinktis."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM prideda pelës palaikymà tekstinëse Linux programose, pvz.\n"
-"Midnight Commander. Ji suteikia galimybæ konsolëje kopijuoti ir ádëti su\n"
-"pele, bei iðkviesti kontekstiná meniu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache yra World Wide Web serveris. Jis naudojamas pateikti HTML\n"
-"byloms ir CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneto superserverio demonas (bendrai vadinamas inetd) paleidþia\n"
-"ávairias interneto paslaugas, kai reikia. Jis atsakingas uþ daugelio\n"
-"paslaugø paleidimà, áskaitant telnet, ftp, rsh ir rlogin. Inetd iðjungimas\n"
-"kartu iðjungia visas paslaugas, uþ kurias jis yra atsakingas."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ðis paketas uþkrauna pasirinktà klaviatûros iðdëstymà, kuris\n"
-"nurodytas /etc/sysconfig/keyboard byloje. Jis gali bûti pasirinktas su\n"
-"kbdconfig priemone. Daugumoje kompiuteriø jis turi bûti ájungtas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd yra spausdinimo demonas, bûtinas, kad lpr veiktø tvarkingai.\n"
-"Tai yra tiesiog serveris, paskirstantis spausdinimo darbus spausdintuvui"
-"(ams)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) yra Domenø vardø serveris (DNS), naudojamas\n"
-"iðsiaiðkinti IP adresus pagal hosto vardus."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Primontuoja ir numontuoja visas Network File System (NFS), SMB\n"
-"(Lan Manager/Windows), ir NCP (NetWare) montavimo taðkus."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ájungia/Iðjungia visas tinklo jungtis, nustatytas paleisti\n"
-"ákrovos metu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS yra populiarus protokolas dalintis byloms TCP/IP tinkluose.\n"
-"Ði tarnyba teikia NFS serverio funkcionalumà, kuris tvarkomas\n"
-"/etc/exports byloje."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS yra populiarus protokolas dalintis byloms TCP/IP tinkluose.\n"
-"Ði tarnyba teikia NFS bylø uþrakinimo funkcionalumà."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA skirtas palaikyti tokiems neðiojamø kompiuteriø árenginiams,\n"
-"kaip modemai ir tinklo plokðtës. Jis nebus paleidþiamas, jei nëra "
-"sutvarkytas,\n"
-"tad saugu palikti já net kompiuteriuose, kuriems jo nereikia."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper tvarko RPC jungtis, kurios naudojamos protokoluose,\n"
-"tokiuose kaip NFS bei NIS. portmap serveris turi bûti paleistas "
-"kompiuteriuose,\n"
-"kurie veikia kaip serveriai protokolø, naudojanèiø PS jungtis."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix yra paðto siuntimo agentas (MTA), tai yra programa,\n"
-"siunèianti paðtà ið vieno kompiuterio á kità."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Iðsaugo ir atkuria sistemos entropijos tvenkiná aukðtesnës kokybës\n"
-"atsitiktiniø skaièiø generavimui."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed demonas leidþia automatiðkai atnaujinti IP marðrutizavimo lenteles,\n"
-"naudojant RIP protokolà. RIP plaèiai naudojamas maþuose tinkluose, taèiau\n"
-"sudëtinguose tinkluose gali prireikti sudëtingesniø protokolø."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolas leidþia tinklo vartotojams iðmatuoti\n"
-"vykdymo metrikas bet kuriam kompiuteriui ið tinklo."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolas leidþia tinklo vartotojams suþinoti, kas yra\n"
-"prisijungæs prie kitø atsakinëjanèiø kompiuteriø."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolas leidþia nutolusiems vartotojams gauti sàraðà\n"
-"vartotojø, prisijungusiø prie kompiuterio, kuriame veikia rwho demonas\n"
-"(panaðiai kaip finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Startuojant paleisti X_Windows"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog yra priemonë, kurià daugelis demonø naudoja uþraðyti\n"
-"log áraðams á ávairias sistemos log bylas.  Visada pravartu leisti syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Paleidþia ir sustabdo X ðriftø serverá pakrovimo metu ir iðjungiant."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Pasirink kokias tarnybas ájungus paleisti automatiðkai"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Spausdintuvas"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internetas"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistemos reþimas"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Nutolusio lpd spausdintuvo nuostatos"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Serveris, Duomenø baziø"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "árenginys"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Dëmesio"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Pridurti"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Bûsena:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektorius"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Likæs pasaulis"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Priëjimas prie Interneto"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedija - grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Kûrimo, Tinklapiø"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Prisijungti prie interneto"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Tinklo interfeisas"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB serverio hostas"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Þaidimai"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "þiniukas"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "privalomas"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Ádiegiamas paketas %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Að negaliu perskaityti tavo skirsniø lentelës, ji man pernelyg sugadinta :(\n"
-"Pabandysiu iðvalyti blogus skirsnius"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Klaida"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Konfigûracija po ádiegimo"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Ádiegimo Tipo Konfiguracija"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Sveikiname!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Ádiegti"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Pridëti vartotojà"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Suþymima loopback byla %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Paketø grupiø pasirinkimas"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Paðalinti eilæ"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Iðmesti Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Vartotojo vardas"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Praðom iðbandyti pelæ"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Praðom bandyti vël"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Praðom bandyti vël"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Jokio slaptaþodþio"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN jungtis"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Pasirink spausdintuvo jungtá"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Praðom pasirinkti klaviatûros iðdëstymà."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Praðom spragtelëti ant skirsnio"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Praðom iðbandyti pelæ"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Tinklo interfeisas"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Vartotojo vardas"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Praðom pasirinkti kalbà, kurià naudosi."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Ar naudoti kieto disko optimizavimà?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Ar naudoti kieto disko optimizavimà?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Palauk"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Su ratuku"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Su ratuku"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modulio parinktys:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Tinklo konfigûravimas"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Nustatyti bylø sistemas"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Pasirinktys"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Praðom pasirinkti, prie kurios nuosekliosios jungties yra prijungtas tavo "
-"modemas."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Tinklo konfigûravimas"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Praðom pasirinkti savo pelës rûðá."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Atstatyti ið diskelio"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Praðom pasirinkti savo pelës rûðá."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Kitas"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Ádiegti sistemà"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Atstatyti ið bylos"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Atstatyti ið bylos"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Prisitaikyti"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/Pagalba"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Ankstesnis"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Bûsena:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Atstatyti ið bylos"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Tekstas"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Pasirinkti paketus"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Praðom pasirinkti kalbà, kurià naudosi."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Praðom pasirinkti kalbà, kurià naudosi."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Praðom pasirinkti kalbà, kurià naudosi."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Bloga atsarginë byla"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Iðsaugoti á bylà"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Praðom iðbandyti pelæ"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Pasirink paketus, kuriuos tu nori ádiegti."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Tinklo konfigûravimas"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Tinklo konfigûravimas"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Nustatyti bylø sistemas"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s ádiegimas nepavyko. Ávyko tokia klaida:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s nerastas"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Atlikta"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Suþymëti diskelá"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ruoðiamas ádiegimas"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "grieþta"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "grieþta"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Suþymëti skirsnius"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Iðmetami RPM'ai"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Prijungimo vieta"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Pasirink skirsnius, kuriuos nori suþymëti"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Biuras"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Nutraukti"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Spausdintuvas"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Ádiegti sistemà"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Pasirink bylà"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Nutolæs spausdintuvas"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Tavo sistemoje nerasta jokia tinklo plokðtë!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Ádiegti"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Tavo sistemoje nerasta jokia tinklo plokðtë!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Iðeiti ið ádiegimo"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Interneto jungties dalinimas"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneto jungties dalinimas ðiuo metu ájungtas"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis ðiuo metu ájungtas.\n"
-"\n"
-"Tai kà norëtum daryti?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "iðjungti"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "nieko"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ið naujo nustatyti"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Ieðkoma áranga..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneto jungties dalinimas ðiuo metu iðjungtas"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneto jungties dalinimas ðiuo metu iðjungtas"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis ðiuo metu iðjungtas.\n"
-"\n"
-"Tai kà norëtum daryti?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ájungti"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneto jungties dalinimas ðiuo metu ájungtas"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Tavo kompiuteris gali bûti sutvarkytas taip, kad dalintøsi interneto "
-"jungtimi.\n"
-"\n"
-"Pastaba: tau reikia atskiros tinklo plokðtës, nustatytos vietiniam tinklui "
-"(LAN).\n"
-"\n"
-"Ar norëtum sutvarkyti interneto jungties dalinimà?"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interfeisas"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Tavo sistemoje nerasta jokia tinklo plokðtë!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Tavo sistemoje nerasta jokia tinklo plokðtë. praðom paleisti árangos "
-"nustatymo áranká."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Tinklo interfeisas"
-
-#: ../../standalone/drakgw_.c:244
-#, fuzzy, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Tavo sistemoje yra tik viena sutvarkyta tinklo plokðtë:\n"
-"\n"
-"%s\n"
-"\n"
-"Ar norëtum sutvarkyti savo vietiná tinklà ðiai plokðtei?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Praðom pasirinkti, kuri tinklo plokðtë bus prijungta prie vietinio tinklo."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitorius nenurodytas"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Ádiegimo Tipo Konfiguracija"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Modemo Nustatymai"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS serverio IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Rastas galimas LAN adreso konfliktas esamose %s nuostatose!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Áspëjimas! Aptikta ugniasienës konfigûracija! Tau gali tekti kai kà "
-"iðtaisyti rankomis po ádiegimo."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigûruojama..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Konfigûruojami skriptai, ádiegiamos programos, paleidþiami serveriai..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Yra problemø ádiegiant paketà %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Viskas buvo sukonfigûruota.\n"
-"Tu gali dabar dalintis interneto jungtimi su kitais kompiuteriais vietiniame "
-"tinkle, naudojant automatinæ tinklo konfigûracijà (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis ðiuo metu iðjungtas.\n"
-"\n"
-"Tai kà norëtum daryti?"
-
-#: ../../standalone/drakgw_.c:690
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Interneto jungties dalinimas jau buvo sutvarkytas.\n"
-"Jis ðiuo metu ájungtas.\n"
-"\n"
-"Tai kà norëtum daryti?"
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneto jungties dalinimas ðiuo metu ájungtas"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interneto jungtis ir nustatymas"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneto jungties dalinimas"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Tinklo konfigûravimas (%d adapteris)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profailas: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Iðtrinti profailà..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profailas iðtrynimui:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Naujas profailas..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Kompiuterio vardas:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Priëjimas prie Interneto"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipas: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Ðliuzas (Gateway):"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfeisas:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Bûsena:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Nustatyti Priëjimà prie Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN konfiguravimas"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Tvarkyklë"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfeisas"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Protocol"
-msgstr "Protokolas"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Bûsena:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Nustatyti Vietiná Tinklà..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Meistras..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Nustatymø tikrinimas"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nepajungtas"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-#, fuzzy
-msgid "Disconnect..."
-msgstr "Sujungimas..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapteris %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Ákrovos Protokolas"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Startavo ákrovos metu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klientas"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktyvus"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktyvus"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Interneto jungties konfiguravimas"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Interneto Jungties Konfiguravimas"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Jungties tipas: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrai"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Ðliuzas (Gateway)"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet Korta"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klientas"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Nustatomas saugumo lygis"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Prisijungti prie interneto"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Pasirink kurá áranká norëtum naudoti"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadieèiø (Kvebeko)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandø"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "nuoseklioji"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "vartosena: keyboarddrake [--expert] [klaviatûra]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Praðom pasirinkti klaviatûros iðdëstymà."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ar tu nori, kad BackSpace raðytø Delete konsolëje?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Pakeisk CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Praðom ákiðti Installation CD-ROM á kaupiklá ir paspausti Gerai, kai "
-"baigta.\n"
-"Jei tu jo neturi, paspausk mygtukà nutraukti, kad iðvengtum atnaujinimo."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "nepavyko paleisti gyvo atnaujinimo!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "draknet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Byla/_Nauja"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Byla/Atidaryti"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Byla/Uþraðyti"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Byla/Uþraðyti Kaip"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Byla/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/Pasirinktys"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Pasirinkys/Bandymas"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pagalba"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pagalba/_Apie..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Vartotojo vardas"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Patikrinti prievadus"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Kompiuteris: "
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Kompiuteris: "
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "LAN konfiguravimas"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "ðeðëlinis"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ádomu"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "suþymimas"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Nustatymai"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Uþraðyti Kaip..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Praðom pasirinkti savo pelës rûðá."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb nerasta\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Ar emuliuoti treèià klaviðà?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Pasirink vaizdo plokðtæ"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Ákrovos árenginys"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Aptikta ugniasienës konfigûracija!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Pasirink savo kalbà"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Parink ádiegimo klasæ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kieto disko nustatymas"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Pelës nustatymas"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Pasirink klaviatûrà"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "curly"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Nustatyti bylø sistemas"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Suþymëti skirsnius"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pasirinkti paketus"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Ádiegti sistemà"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Pridëti vartotojà"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nustatyti tinklà"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nustatyti servisus"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Ádiegti ákrovos tvarkyklæ"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Sukurti ákrovos diskelá"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nustatyti X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Ádiegti sistemà"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Iðeiti ið ádiegimo"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adapteris %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Klaida atidarant %s áraðymui: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Tinklo Konfigûravimo Meistras"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Praðome palaukti. Ruoðiamas ádiegimas"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Serveris, Tinklapiø/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Tinklo Kompiuteris, X klientas"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Biuras"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Árankiai tavo Palm Pilot arba Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "KDE darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Serveris, Firewall/Routeris"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Biuro programos: tekstø redaktoriai (kword, abiword), skaièiuoklës (kspread, "
-"gnumeric), pdf perþiûros programos ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Su garsu susijæ árankiai: mp3 ir midi grotuvai, mikðeriai ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knygos ir HOWTO apie Linux ir Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE darbo stotis"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "IceWM, Window Maker, Enlightenment, Fvwm ir pan."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Vaizdas"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Árankiø rinkinys paðtui, naujienoms, þiniatinkliui, bylø siuntimui ir "
-"pokalbiams"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Serveris, Duomenø baziø"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ar tu nori iðbandyti nustatymus?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Garsas"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Priemonës"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolës árankiai"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneto stotis"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedija stotis"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN Konfiguravimas"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Daugiau grafiniø darbalaukiø (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, pagrindinë grafinë aplinka su dideliu rinkiniu "
-"pritaikytø programø"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Árankiai kurti ir kepti CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Biuro darbo stotis"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "serveris"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm ir Pan."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafikos programos, tokios kaip The GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C bei C++ kûrimo bibliotekos, programos ir include bylos"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Serveris, Tinklo Kompiuterio serveris"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Serveris, Paðto/Grupinio darbo/Naujienø"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Þaidimø stotis"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Vaizdo grotuvai ir redaktoriai"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Programos pasilinksminimui: lentos, strateginiai, kortø þaidimai ir pan."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Rinkinys árankiø skaityti ir siøsti paðtà bei naujienas (pine, mutt, tin) ir "
-"narðyti þiniatinklá (WWW)"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archyvavimas, emuliatoriai, stebëjimas"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Asmeniniai finansai"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafinë aplinka su vartotojui draugiðkø programø ir darbalaukio árankiø "
-"rinkiniu"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Priëjimas prie Interneto"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Garso ir vaizdo grojimo/redagavimo programos"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Kiti grafiniai darbalaukiai"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktoriai, shell'ai, bylø árankiai, terminalai"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programos, skirtos tvarkyti tavo finansus, pvz. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Asmeninës informacijos tvarkyklë (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD kepimas"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Mokslinës darbo stotis"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Nutraukti"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Jokia"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Pasirink áprastà vartotojà:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Nutolæs spausdintuvas"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Dabar tu gali nurodyti parinktis moduliui %s."
-
-#~ msgid "Low"
-#~ msgstr "Þemas"
-
-#~ msgid "Medium"
-#~ msgstr "Vidutinis"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr "Ðiame saugumo lygyje yra daugiau perspëjimø ir saugumo patikrinimø."
-
-#~ msgid "mount failed"
-#~ msgstr "primontuoti nepavyko"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedija"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Eksperto"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux tvarko laikà pagal GMT (Greenwich Mean Time),\n"
-#~ "ir paverèia já á vietiná laikà pagal tavo pasirinktà laiko juostà."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Prisijungti prie interneto"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Atsijungti nuo interneto"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Nustatyti tinklo jungtá (LAN arba interneto)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Á kurá diskà tu nori já perkelti?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Pasirink paketus, kuriuos tu nori ádiegti."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome darbo stotis"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Vartotojas: "
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Praðom pasirinkti savo pelës rûðá."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Iðeiti"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Iðimamø laikmenø automatinis montavimas"
-
-#~ msgid "Active"
-#~ msgstr "Aktyvus"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ne"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "\"%s\" modelio spausdintuvas buvo aptiktas prie "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Vietinio spausdintuvo jungtis"
-
-#~ msgid "Printer Device"
-#~ msgstr "Spausdintuvo árenginys"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Nutolæs CUPS serveris"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Nutolæs CUPS serveris"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistemos reþimas"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Kitas"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Praðom pasirinkti klaviatûros iðdëstymà."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Praðom spragtelëti ant skirsnio"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipas: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Bloga atsarginë byla"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Nustatyti X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Spausdintuvo árenginys"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Nutraukti"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Gerai"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Pelë"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Iðbandoma jungtis..."
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Iðbandoma jungtis..."
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sistema dabar prijungta prie interneto."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Pasirink dydá, kiek nori visko ádiegti"
-
-#~ msgid "Total size: "
-#~ msgstr "Bendras dydis: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Praðom palaukti, "
-
-#~ msgid "Total time "
-#~ msgstr "Bendra trukmë "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Naudoti esamus X11 nustatymus?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Prie kurio árenginio yra prijungtas tavo spausdintuvas\n"
-#~ "(atmink, kad /dev/lp0 yra LPT1 ekvivalentas)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Áspëju, ði tinklo plokðtë jau buvo sutvarkyta.\n"
-#~ "Ar norëtum nustatyti jà ið naujo?"
-
-#~ msgid "New"
-#~ msgstr "Naujas"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Iðmesti"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Praðom spragtelëti ant skirsnio"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Dviprasmiðkumas (%s), bûk tikslesnis\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (pagal nutylëjimà %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr ""
-#~ "Tavo pasirinkimas? (pagal nutylëjimà %s, ávesk `none' jei nieko nenori) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "negaliu atidaryti /etc/sysconfig/autologin skaitymui: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Ar tu nori ið naujo paleisti tinklà"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Ar tu sutinki?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ruoðiamasi ið naujo paleisti tinklo árenginá:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ruoðiamasi ið naujo ájungti tinklo árenginá %s. Ar tu sutinki?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Nebent tu tiksliai þinai kità variantà, áprastas pasirinkimas bûna \"/dev/"
-#~ "hda\"\n"
-#~ "(tai yra pirminis pagrindinis IDE kaupiklis) arba \"/dev/sda\" (pirmas "
-#~ "SCSI diskas)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Jungties tipas: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Pasirink áprastà vartotojà:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Praðom iðbandyti pelæ"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Pasirink norimà kalbà ádiegimui ir sistemos vartojimui"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Tu turi sutikti su aukðèiau esanèios licenzijos sàlygomis, kad tæstum "
-#~ "ádiegimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Praðom spausti ¥Sutinku´, jei sutinki su jos sàlygomis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Praðom spausti ¥Atmetu´, jei nesutinki su jos sàlygomis.\n"
-#~ "Ádiegimas bus nutrauktas, nekeièiant esamos konfigûracijos."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Pasirink norimà klaviatûros iðdëstymà ið sàraðo aukðèiau"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Jei nori, kad kitos kalbos (be tos, kurià nurodei ádiegimo pradþioje)\n"
-#~ "bûtø prieinamos ádiegus sistemà, pasirink jas ið aukðèiau esanèio\n"
-#~ "sàraðo. Jei nori visø, tiesiog spausk ¥Visos´."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Pasirink:\n"
-#~ "\n"
-#~ "  - Prisitaikyta: Jeigu esi pakankamai paþástamas su GNU/Linux, galësi "
-#~ "pasirinkti pagrindinæ sistemos paskirtá. Þiûrëk þemiau dël smulkmenø.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eksperto: Jeigu tau puikiai sekasi su GNU/Linux, ir nori smarkiai "
-#~ "prisitaikyti \n"
-#~ "    ádiegimà. Kaip ir ¥Prisitaikytoje´ klasëje, tu galësi pasirinkti "
-#~ "pagrindinæ \n"
-#~ "    sistemos paskirtá. Bet, labai praðau, NESIRINK ÐITO, NEBENT TIKRAI "
-#~ "ÞINAI, KÀ DARAI!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Tu turi apibrëþti, kam maðina bus naudojama. Pasirinkimai yra:\n"
-#~ "\n"
-#~ "* Darbo stotis: tai geriausias pasirinkimas, jei ruoðiesi maðinà naudoti "
-#~ "daugiausiai kasdieniams darbams,\n"
-#~ "  ástaigoje ar namie.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Kûrimo: jei ruoðiesi ðià maðinà naudoti daugiausiai programinës árangos "
-#~ "kûrimui, tai geras pasirinkimas. Tu\n"
-#~ "  tada turësi ádiegtà pilnà rinkiná programø, skirtø kompiliuoti, derinti "
-#~ "ir formatuoti iðeities tekstus, bei kurti\n"
-#~ "  programø paketus.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serveris: jei ruoðiesi naudoti ðià maðinà naudoti kaip serverá, tai "
-#~ "geras pasirinkimas. Tiek bylø serverá\n"
-#~ "  (NFS arba SMB), tiek spausdinimo serverá (Unix ar Microsoft Windows "
-#~ "stiliaus), autentikacijos (NIS),\n"
-#~ "  duomenø bazës serverá ir pan. Jei taip, nesitikëk, kad bus ádiegti "
-#~ "visokie graþumai (KDE, GNOME. etc.)"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Tu dabar gali pasirinkti grupæ paketø, kuriuos nori ádiegti\n"
-#~ "ar atnaujinti.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX tada patikrins, ar yra pakankamai vietos ádiegti juos visus. Jei "
-#~ "ne,\n"
-#~ "perspës tave apie tai. Jei vis tiek norësi tæsti, pasirinktø grupiø "
-#~ "ádiegimas\n"
-#~ "bus pratæstas, taèiau kai kurie maþiau naudingi paketai bus iðmesti. "
-#~ "Sàraðo\n"
-#~ "pabaigoje tu gali pasirinkti variantà \"Atskirø paketø pasirinkimas\", "
-#~ "tuo atveju\n"
-#~ "tu galësi narðyti po daugiau nei 1000 paketø ir pasirinkti juos po "
-#~ "vienà..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Dabar tu gali pasirinkti po vienà paketus, kuriuos\n"
-#~ "nori ádiegti\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu gali iðskleisti ir suskleisti medá, spragtelëdamas mygtukus "
-#~ "kairiajame\n"
-#~ "apatiniame paketø lango kampe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei labiau norëtum matyti paketus surikiuotus pagal abëcëlæ, spragtelëk "
-#~ "ant\n"
-#~ "ikonos \"Perjungti tarp rikiavimo pagal grupes ar abëcëlæ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nenori, kad tave áspëtø apie priklausomybes, spragtelëk ant\n"
-#~ "\"Tyliai patenkinti priklausomybes\". Jei taip padarysi, nepamirðk, kad "
-#~ "atþymëjus\n"
-#~ "vienà paketà, gali bûti atþymëti keletas kitø, kurie nuo jo priklauso."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Jei turi visus CD ið aukðèiau esanèio sàraðo, spausk Gerai.\n"
-#~ "Jei neturi në vieno ið ðiø CD, spausk Nutraukti.\n"
-#~ "Jei trûksta tik kai kuriø CD, atþymëk juos ir tada spausk Gerai."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Jei tu nori prijungti savo kompiuterá prie interneto arba\n"
-#~ "vietinio tinklo, pasirink teisingà variantà. Praðom ájungti árenginá "
-#~ "prieð\n"
-#~ "pasirenkant teisingà variantà -- tai leis DrakX automatiðkai já "
-#~ "atpaþinti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tu neturi galimybës prisijungti nei prie interneto, nei prie vietinio "
-#~ "tinklo,\n"
-#~ "rinkis \"Iðjungti tinklà\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori sutvarkyti tinklà vëliau, baigus ádiegimà, arba jei jau baigei\n"
-#~ "konfigûruoti savo tinklo jungtis, rinkis \"Atlikta\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nebuvo aptiktas joks modemas. Praðom pasirinkti nuosekløjá prievadà,\n"
-#~ "prie kurio jis yra prijungtas.\n"
-#~ "\n"
-#~ "Þinok, kad pirmasis nuoseklusis prievadas (COM1 MS Windows'uose)\n"
-#~ "vadinamas ttyS0 Linux'e."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Tu dabar gali ávesti prisiskambinimo nuostatas. Jei tu\n"
-#~ "neþinai arba nesi tikras, kà ávesti, teisingà informacijà gali gauti ið "
-#~ "savo\n"
-#~ "Interneto paslaugø tiekëjo (IPT). Jei tu neávesi DNS (vardø serverio)\n"
-#~ "informacijos èia, ji bus gauta ið Interneto paslaugø tiekëjo jungimosi "
-#~ "metu."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Jei tavo modemas yra iðorinis, praðom ájungti já dabar, kad DrakX galëtø "
-#~ "atpaþinti já automatiðkai."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Praðau, ájunk savo modemà ir pasirink teisingà."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Jei tu nesi tikras, ar aukðèiau pateikta informacija yra teisinga,\n"
-#~ "arba tiksliai neþinai, kà ávesti, teisingà informacijà gali gauti ið "
-#~ "savo\n"
-#~ "Interneto paslaugø tiekëjo (IPT). Jei tu neávesi DNS (vardø serverio)\n"
-#~ "informacijos èia, ji bus gauta ið Interneto paslaugø tiekëjo jungimosi "
-#~ "metu."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Tu dabar gali ávesti savo hosto vardà, jei to reikia. Jei tu\n"
-#~ "neþinai arba nesi tikras, kà ávesti, teisingà informacijà gali gauti ið "
-#~ "savo\n"
-#~ "Interneto paslaugø tiekëjo (IPT)."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Tu dabar gali sutvarkyti savo tinklo árenginá:\n"
-#~ "\n"
-#~ "   * IP adresas: jeigu jo neþinai, arba nesi tikras kà ávesti, pasiklausk "
-#~ "savo tinklo administratoriaus.\n"
-#~ "     Tu turëtum neávesti IP adreso, jei pasirenki \"Automatinis IP\" "
-#~ "þemiau.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" daþniausiai yra neblogas pasirinkimas. "
-#~ "Jeigu neþinai, arba nesi tikras\n"
-#~ "     kà ávesti, pasiklausk savo tinklo administratoriaus.\n"
-#~ "\n"
-#~ "   * Automatinis IP: Jeigu tavo tinkle naudojamas BOOTP ar DHCP "
-#~ "protokolas, pasirink ðá variantà.\n"
-#~ "     Jeigu pasirinksi já, nereikës nieko áraðyti prie \"IP adreso\". "
-#~ "Jeigu tu neþinai, arba nesi tikras, ar reikia\n"
-#~ "     pasirinkti ðá variantà, pasiklausk tinklo administratoriaus."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Tu dabar gali ávesti savo hosto vardà. Jeigu jo neþinai,\n"
-#~ "arba nesi tikras kà ávesti, pasiklausk savo tinklo administratoriaus."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Tu dabar gali ávesti savo hosto vardà, jei to reikia. Jei tu neþinai\n"
-#~ "arba nesi tikras, kà ávesti, palik tuðèia."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Dabar tu gali ávesti prisiskambinimo nuostatas. Jeigu tu gerai neþinai,\n"
-#~ "kà áraðyti, teisingà informacijà gali gauti ið savo ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Jeigu tu naudosi proxy, praðom dabar juos nustatyti. Jeigu tu dar "
-#~ "neþinai,\n"
-#~ "ar turëtum naudoti proxy, pasiklausk tinklo administratoriaus arba ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Dabar tu gali ádiegti kriptografijos paketà, jeigu tavo interneto juntis "
-#~ "buvo\n"
-#~ "gerai sutvarkyta. Pradþiai pasirink atvaizdá (mirror), ið kurio parsiøsti "
-#~ "paketus,\n"
-#~ "o po to paþymëk, kuriuos paketus ádiegti.\n"
-#~ "\n"
-#~ "Atmink, kad tu turi pasirinkti atvaizdá ir kriptografijos paketus, "
-#~ "atitinkanèius\n"
-#~ "ástatymø reikalavimus."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Tu dabar gali pasirinkti laiko juostà, priklausomai nuo to, kur gyveni."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Tu gali sukonfigûruoti vietiná spausdintuvà (prijungtà prie tavo "
-#~ "kompiuterio) arba\n"
-#~ "nutolusá spausdintuvà (prieinamà per Unix, Netware arba Microsoft Windows "
-#~ "tinklà)"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "jei tu nori spausdinimo galimybës, praðom dabar pasirinkti vienà "
-#~ "spausdinimo\n"
-#~ "sistemà ið CUPS ir LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS yra nauja, galinga ir lanksti spausdinimo sistema Unix sistemoms "
-#~ "(CUPS\n"
-#~ "reiðkia \"Common Unix Printing System\"). Tai yra spausdinimo sistema,\n"
-#~ "Mandrake Linux parenkama pagal nutylëjimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR yra sena spausdinimo sistema, naudota ankstesnëse Mandrake Linux\n"
-#~ "versijose.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tu neturi spausdintuvo, pasirink \"Jokia\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux gali susitvarkyti su dauguma spausdintuvø tipø. Kiekvienas ið\n"
-#~ "ðiø tipø reikalauja skirtingo nustatymo.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei tavo spausdintuvas yra fiziðkai prijungtas prie tavo kompiuterio,\n"
-#~ "pasirink \"Vietinis spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori prieiti prie spausdintuvo, kuris yra nutolusioje Unix "
-#~ "sistemoje,\n"
-#~ "pasirink \"Nutolæs spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Jei nori prieiti prie spausdintuvo, kuris yra nutolusiame Microsoft "
-#~ "Windows\n"
-#~ "kompiuteryje (arba Unix kompiuteryje, naudojanèiame SMB protokolà), "
-#~ "pasirink\n"
-#~ "\"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Praðau, ájunk savo spausdintuvà prieð leisdamas DrakX já atpaþinti.\n"
-#~ "\n"
-#~ "Tu dabar turi ávesti ðiek tiek informacijos.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo vardas: spausdinimo kaupykla (spooler) naudoja \"lp\" "
-#~ "kaip áprastà spausdintuvo vardà. Taigi,\n"
-#~ "     tu turi turëti spausdintuvà, pavadintà \"lp\". Jei turi tik vienà "
-#~ "spausdintuvà, gali jam parinkti keletà vardø. Tu \n"
-#~ "     tiesiog turi atskirti juos staèiu brûkðniu (\"|\"). Taigi, jei "
-#~ "patiktø prasmingesnis vardas, tu turi já áraðyti pirmà,\n"
-#~ "     pvz. \"Mano spausdintuvas|lp\". Spausdintuvas, kurio varde yra \"lp"
-#~ "\", bus parenkamas pagal nutylëjimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "    * Apraðymas: jis nebûtinas, bet gali bûti naudingas, jei prie "
-#~ "kompiuterio yra prijungti keli spausdintuvai arba\n"
-#~ "     leidþiama kitiems kompiuteriams prieiti prie ðio spausdintuvo.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Vieta: jei nori áraðyti ðiek tiek informacijos apie tai, kur tas "
-#~ "spausdintuvas yra, áraðyk já èia (gali raðyt\n"
-#~ "     kà tik nori, pavyzdþiui \"ant boso stalo\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Tu dabar turi ávesti ðiek tiek informacijos.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo vardas: spausdinimo kaupykla (spooler) naudoja \"lp\" "
-#~ "kaip áprastà spausdintuvo vardà.\n"
-#~ "     Taigi, tu turi turëti spausdintuvà, pavadintà \"lp\". Jei turi tik "
-#~ "vienà spausdintuvà, gali jam parinkti keletà\n"
-#~ "     vardø. Tu tiesiog turi atskirti juos staèiu brûkðniu (\"|\"). Taigi, "
-#~ "jei patiktø prasmingesnis vardas, tu turi já\n"
-#~ "     áraðyti pirmà, pvz. \"Mano spausdintuvas|lp\". Spausdintuvas, kurio "
-#~ "varde yra \"lp\", bus parenkamas\n"
-#~ "     pagal nutylëjimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Kaupimo (spool) katalogas: tai katalogas, á kurá áraðomi spausdinimo "
-#~ "darbai. Palik áprastà parinktá,\n"
-#~ "     jeigu neþinai kà naudoti.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spausdintuvo jungtis: jei tavo spausdintuvas yra fiziðkai prijungtas "
-#~ "prie tavo kompiuterio, rinkis\n"
-#~ "     \"Vietinis spausdintuvas\". Jie nori prieiti prie spausdintuvo, "
-#~ "prijungto prie nutolusio Unix kompiuterio,\n"
-#~ "     pasirink \"Nutolæs lpd spausdintuvas\".\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "     Jei nori prieiti prie spausdintuvo, kuris yra nutolusiame Microsoft "
-#~ "Windows kompiuteryje (arba\n"
-#~ "     Unix kompiuteryje, naudojanèiame SMB protokolà), pasirink \"SMB/"
-#~ "Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Jie nori prieiti prie spausdintuvo, esanèio Netware tinkle, pasirink "
-#~ "\"Netware\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Tavo spausdintuvas nebuvo atpaþintas. Praðom ávesti pavadinimà "
-#~ "árenginio,\n"
-#~ "prie kurio jis yra prijungtas.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tavo þiniai, dauguma spausdintuvø bûna prijungti prie pirmos "
-#~ "lygiagreèiosios jungties.\n"
-#~ "Tai vadinama \"/dev/lp0\" GNU/Linux sistemose, ir \"LPT1\" Microsoft "
-#~ "Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Tu dabar turi pasirinkti savo spausdintuvà ið sàraðo aukðèiau."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Praðom pasirinkti teisingas nuostatas, priklausomai nuo spausdintuvo.\n"
-#~ "Pasiþiûrëk á dokumentacijà, jeigu neþinai, kà èia ávesti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu galësi iðbandyti nustatymus sekanèiame þingsnyje, ir sugráþæs vël juos "
-#~ "pakeisti,\n"
-#~ "jeigu neveikia taip, kaip tu norëtum."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Dabar tu gali ávesti savo Mandrake Linux sistemos root slaptaþodá.\n"
-#~ "Slaptaþodis turi bûti ávestas du kartus patikrinimui, kad abu áraðai "
-#~ "sutampa.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root yra sistemos administratorius ir vienintelis vartotojas, kuriam "
-#~ "leidþiama\n"
-#~ "konfigûruoti sistemà. Taigi, slaptaþodá pasirink atsargiai. Neteisëtas "
-#~ "root\n"
-#~ "vartojimas gali bûti ypatingai pavojingas ðiai sistemai, duomenims joje "
-#~ "ir kitoms,\n"
-#~ " su ja susijusioms sistemoms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Slaptaþodis turi bûti raidþiø ir skaièiø miðinys, maþiausiai 8 simboliø\n"
-#~ "ilgio. Jis turëtø niekada nebûti uþraðytas ant popieriaus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nepasidaryk slaptaþodþio pernelyg ilgo ir sudëtingo: tu turëtum já "
-#~ "prisiminti\n"
-#~ "be ypatingø pastangø."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Dabar tu gali sukurti vienà arba daugiau \"paprastø\" vartotojø.\n"
-#~ "Kiekvienam þmogui, kuriam tu nori leisti naudotis ðiuo kompiuteriu,\n"
-#~ "tu gali sukurti vienà ar daugiau sàskaitø (account). Atmink, kad\n"
-#~ "kiekvienas vartotojas turës savus nustatymus (grafinës aplinkos,\n"
-#~ "programø nuostatas, ir t.t. ), bei savo \"namø katalogà\", kuriame\n"
-#~ "tie nustatymai bus laikomi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pirmiausia, sukurk vartotojà sau paèiam! Net jeigu tu bûsi vienintelis "
-#~ "ðio\n"
-#~ "kompiuterio vartotojas, tu NEGALI prisijungti kaip root vartotojas "
-#~ "sistemos\n"
-#~ "kasdieniam naudojimui: taip iðkiltø didelë saugumo grësmë. Kad padarytum\n"
-#~ "sistemà nebeámanomà naudoti, uþtenka padaryti porà klaidø.\n"
-#~ "\n"
-#~ "\n"
-#~ "Todël, tu turëtum prisijungti prie sistemos, naudodamasis vartotojo "
-#~ "sàskaita,\n"
-#~ "kurià bûsi èia sukûræs, o pasisveikinti kaip root tik administravimo ar\n"
-#~ "prieþiûros darbams."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Sukurti ákrovos diskelá labai rekomenduojama. Jei tau nepavyktø\n"
-#~ "ákrauti kompiuterio, tai vienintelis bûdas iðgelbëti sistemà jos\n"
-#~ "nediegiant ið naujo."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Pagrindinës LILO bei GRUB nuostatos yra ðios:\n"
-#~ "  - Ákrovos árenginys: Nurodo árenginá (pvz. disko skirsná), kuriame\n"
-#~ "yra ákrovos sektorius. Pasirink \"/dev/hda\", nebent þinai tiksliai "
-#~ "kitaip.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauzë prieð ákeliant áprastà atvaizdá (image): Nurodo deðimtøjø\n"
-#~ "sekundës daliø kieká, kiek reikia palaukti, prieð paleidþiant pirmà "
-#~ "atvaizdá.\n"
-#~ "Tai naudinga sistemoms, kurios kraunasi iðkart po klaviatûros ájungimo.\n"
-#~ "Ákrovos tvarkyklë nelaukia, jeigu \"pauzë\" yra nenurodyta arba lygi "
-#~ "nuliui.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Vaizdo reþimas: Tai nurodo  VGA reþimà, pasirenkamà paleidþiant.\n"
-#~ "Yra galimos ðios reikðmës:\n"
-#~ "\n"
-#~ "    * normal: pasirinkti standartiná 80x25 tekstiná reþimà.\n"
-#~ "\n"
-#~ "    * <skaièius>: naudoti atitinkamà tekstiná reþimà."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO yra ákrovos tvarkyklë SPARC'ams: ji gali ákrauti\n"
-#~ "tiek GNU/Linux, tiek bet kokià kità operacijø sistemà, esanèià\n"
-#~ "kompiuteryje. Paprastai tos kitos operacijø sistemos yra teisingai\n"
-#~ "atpaþástamos ir ádiegiamos. Jeigu ne, tu gali pridëti áraðus pats ðiame\n"
-#~ "lange. Bûk atidus ir pasirink teisingus parametrus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tu taip pat gali uþdrausti priëjimà prie tø kitø operacijø sistemø\n"
-#~ "bet kam, jei iðtrinsi atitinkamus áraðus. Bet tuo atveju, tau prireiks\n"
-#~ "ákrovos diskelio, kad jas ákrautum!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Pagrindinës SILO nuostatos yra ðios:\n"
-#~ "  - Ákrovos tvarkyklës ádiegimas: Parodo, kur tu nori padëti "
-#~ "informacijà,\n"
-#~ "reikalingà ákrauti GNU/Linux. Pasirink \"Pirmasis kaupiklio sektorius "
-#~ "(MBR)\",\n"
-#~ "nebent þinai tiksliai kitaip.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauzë prieð ákeliant áprastà atvaizdá (image): Nurodo deðimtøjø\n"
-#~ "sekundës daliø kieká, kiek reikia palaukti, prieð paleidþiant pirmà "
-#~ "atvaizdá.\n"
-#~ "Tai naudinga sistemoms, kurios kraunasi iðkart po klaviatûros ájungimo.\n"
-#~ "Ákrovos tvarkyklë nelaukia, jeigu \"pauzë\" yra nenurodyta arba lygi "
-#~ "nuliui."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Atëjo laikas sukonfigûruoti X Window sistemà, kuri yra GNU/Linux GUI\n"
-#~ "(Grafinës vartotojo sàsajos) pagrindas. Kad tai padarytum, tau\n"
-#~ "reikia sukonfigûruoti vaizdo plokðtæ bei monitoriø. Dauguma þingsniø\n"
-#~ "yra automatizuoti, ir tavo darbas gal bût bus tik patikrinti, kas buvo\n"
-#~ "atlikta, ir pritarti nuostatoms :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai konfigûravimas bus baigtas, bus paleisti X'ai (nebent papraðysi\n"
-#~ "DrakX, kad to nedarytø) tam, kad galëtum patikrinti ir pamatytum,\n"
-#~ "ar nuostatos tau tinka. Jeigu ne, tu gali sugráþti ir pakeisti jas,\n"
-#~ "tiek kartø, kiek reikës."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Jeigu kas nors su X konfigûracija yra netvarkoje, naudok ðias parinktis\n"
-#~ "teisingai nustatyti X Window sistemai."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Jeigu tu nori pasisveikinti grafiniam reþime, pasirink \"Taip\".\n"
-#~ "Kitu atveju rinkis \"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Tavo sistemà ruoðiamasi perkrauti.\n"
-#~ "\n"
-#~ "Po perkrovimo tavo naujoji Mandrake Linux sistema bus ákrauta\n"
-#~ "automatiðkai. Jeigu nori pakrauti kità operacijø sistemà, praðom\n"
-#~ "perskaityti papildomas instrukcijas."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Èekø (Programuotojo)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakø (Programuotojo)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Kuriamo profailo vardas:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Áraðyti /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Suþymëti visus skirsnius"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Suþymëjus visus skirsnius,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "visi duomenys, esantys ðiuose skirsniuose, bus prarasti"
-
-#~ msgid "Reload"
-#~ msgstr "Vël ákelti"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Ar tu nori sukurti automatinio ádiegimo diskelá Linux dauginimui?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL nustatymas"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Su nutolusiu CUPS serveriu, tau ðioje vietoje nereikia nustatinëti\n"
-#~ "jokiø spausdintuvø; jie bus automatiðkai atpaþástami,\n"
-#~ "nebent tu turi serverá, kuris yra kitame tinkle; tuomet turi áraðyti\n"
-#~ "CUPS serverio IP adresà ir galbût  prievado numerá."
-
-#~ msgid "Remote queue"
-#~ msgstr "Nutolusi eilë"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Nutolusi eilë"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domeno vardas"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Spausdintuvo nëra"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Tinklo konfigûravimas"
-
-#~ msgid "Profile "
-#~ msgstr "Profailas "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Jungties tipas: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Prisijungti prie interneto"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Atsijungti nuo interneto"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Jungties pavadinimas"
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "iðkraipymai"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Áprastas"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Nuostatø bylos turinio nepavyko suprasti."
-
-#~ msgid "Adapter"
-#~ msgstr "Adapteris"
-
-#~ msgid "Disable network"
-#~ msgstr "Uþdrausti tinklà"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Uþdrausti tinklà"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Tu dabar gali iðbandyti savo pelæ. Naudok klaviðus ir ratukà,\n"
-#~ "kad patikrintum ar nuostatos geros. Jei ne, spausk ¥Nutraukti´\n"
-#~ "ir pasirink kità tvarkyklæ."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (arba ADSL) jungtis"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Pelë"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Tu gali tiesiog áraðyti URI, kad prieitum prie spausdintuvo su CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Taip, spausdinti ASCII bandomàjá puslapá"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Taip, spausdinti PostScript bandomàjá puslapá"
-
-#~ msgid "Paper Size"
-#~ msgstr "Lapo dydis"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ar iðstumti lapà po darbo?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint tvarkyklës nuostatos"
-
-#~ msgid "Color depth options"
-#~ msgstr "Spalvø gylio nuostatos"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Spausdinti tekstà kaip PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Taisyti stair-stepping tekstà?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Puslapiø skaièius vienam iðvesties puslapiui"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Kairysis/Deðinysis kraðtai taðkais (1/72 colio)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Virðutinis/Apatinis kraðtas taðkais (1/72 colio)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Papildomos GhostScript nuostatos"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Papildomos teksto nuostatos"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Atbulinë puslapiø seka"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Pasirink nutolusio spausdintuvo jungtá"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Kiekviena spausdinimo eilë turi turëti pavadinimà (pavyzdþiui, lp).\n"
-#~ "Gali bûti nurodyti kiti parametrai, tokie kaip spausdintuvo apraðymas\n"
-#~ "ar jo vieta. Koks ðio spausdintuvo vardas ir kaip jis yra prijungtas?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Kiekviena spausdinimo eilë (á kurià nukreipiami spaudiniai) turi turëti\n"
-#~ "pavadinimà (daþniausiai lp) ir kaupimo katalogà, susietà su ja. Koks "
-#~ "pavadinimas\n"
-#~ "bei katalogas turëtø bûti naudojami ðiai eilei, ir kaip yra prijungtas "
-#~ "spausdintuvas?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Eilës pavadinimas"
-
-#~ msgid "Spool directory"
-#~ msgstr "Kaupimo katalogas"
-
-#~ msgid "Disable"
-#~ msgstr "Iðjungti"
-
-#~ msgid "Enable"
-#~ msgstr "Ájungti"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Norëdamas padaryti sistemà saugesne, pasirink \"Naudoti ðeðëlinæ bylà\" "
-#~ "ir\n"
-#~ "\"Naudoti MD5 slaptaþodþius\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Jeigu tavo tinklas naudoja NIS, pasirink \"Naudoti NIS\". Jeigu\n"
-#~ "neþinai, paklausk tinklo administratoriaus."
-
-#~ msgid "yellow pages"
-#~ msgstr "geltonieji puslapiai"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN konfiguravimas"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Tiekëjo DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Tiekëjo DNS 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kaip tu nori prisijungti prie interneto?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Pasirink bylà"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Iðbandoma jungtis..."
-
-#~ msgid "Configure..."
-#~ msgstr "Konfigûruojama..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Nustatymai: Pridëti suradimo vietà"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ðis paleidimo skriptas bando ákelti tavo USB pelës modulius."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Ákrovos stiliaus konfigûracija"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Dabar, kai prisijungimas prie interneto yra sukonfigûruotas,\n"
-#~ "tavo kompiuteris gali bûti sutvarkytas dalintis ðia interneto jungtimi.\n"
-#~ "Pastaba: reikia turëti atskirà tinklo plokðtæ, per kurià bûtø prijungtas\n"
-#~ "vietinis tinklas (LAN).\n"
-#~ "\n"
-#~ "Ar norëtum sutvarkyti interneto jungties dalinimàsi?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Tyliai patenkinti priklausomybes"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Nustatyti LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Sukurti ákrovos diskelá"
-
-#~ msgid "Choice"
-#~ msgstr "Pasirinkimas"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontali graþiai atrodanti aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikali tradicinë aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitorius"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Dabar tu gali pasirinkti ávairias savo sistemos nuostatas.\n"
-#~ "\n"
-#~ "* Naudoti diskinio kaupiklio optimizacijas: ði nuostata gali padidinti "
-#~ "kietojo disko spartà, bet\n"
-#~ "skirta naudoti tik\n"
-#~ "  patyrusiems vartotojams. kai kurie lustai su klaidomis gali sugadinti "
-#~ "tavo duomenis, taigi bûk atsargus.\n"
-#~ "  Branduolys turi sàraðà blogø árenginiø, taèiau jei nori iðvengti "
-#~ "nemaloniø siurprizø, palik ðià nuostatà iðjungtà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Pasirinkti saugumo lygá: tu gali pasirinkti sistemos saugumo lygá.\n"
-#~ "  Plaèiau apie tai skaityk pateiktuose apraðymuose. Paprasèiausiai, jei "
-#~ "neþinai kà pasirinkti, palik\n"
-#~ "  áprastà variantà.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Tikslus RAM atminties kiekis: deja, nëra standartinio bûdo, kaip "
-#~ "uþklausti BIOS, kiek kompiuteryje yra RAM atminties.\n"
-#~ "  Dël ðios prieþasties, Linux'ui gali nepavykti atpaþinti tikslaus RAM "
-#~ "kiekio. Tokiu atveju tau reikia\n"
-#~ "  nurodyti teisingà jos kieká. Atmink, kad 2 ar 4 MB skirtumas tarp "
-#~ "atpaþintos ir esamos atminties yra normalus.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Iðimamø laikmenø automatinis montavimas: jeigu tu nenori montuoti "
-#~ "iðimamø laikmenø (CD, diskeliø, Zip ir pan.)\n"
-#~ "  rankiniu bûdu, raðydamas \"mount\" ir \"umount\" paþymëk ðià parinktá.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Iðvalyti \"/tmp\", kiekvienà kartà ákrovus: jei nori iðtrinti visas "
-#~ "bylas ir katalogus, esanèius \"/tmp\", ákrovos metu,\n"
-#~ "  paþymëk ðià parinktá.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ákrovos metu ájungti Num Lock: jei nori, kad NumLock bûtø ájungtas "
-#~ "ásikrovus sistemai, paþymëk ðià parinktá.\n"
-#~ "  Atkreipk dëmesá á tai, kad neturëtum to ájungti neðiojamuose "
-#~ "kompiuteriuose, ir kad X'uose NumLock gali veikti arba neveikti."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "Atleiskite, bet paðto konfiguracija dar nepadaryta. Bûkite kantrûs."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Sveiki atvykæ pas Tinklo Konfiguravimo Meistrà.\n"
-#~ "Kokius komponentus norite konfiguruoti?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internet/Tinklo priëjimas"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Ávairûs"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ávairûs klausimai"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Negalima naudoti supermount su aukðtu saugumo lygiu"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "dëmesio: ÐIAME SAUGUMO LYGYJE, ROOT'ui NELEIDÞIAMA PASISVEIKINTI "
-#~ "KONSOLËJE!\n"
-#~ "jei nori tapti root, turi pasisveikinti kaip vartotojas, o tada naudoti "
-#~ "¥su´.\n"
-#~ "Bendriau paëmus, nemanyk savo kompiuterio naudoti kam nors kitam, nebent "
-#~ "serveriui.\n"
-#~ "Tu buvai áspëtas."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Bûk atsargus, jei numlock bus ájungtas, daugybë klaviðø gali veikti\n"
-#~ "kaip skaièiai vietoj normaliø raidþiø (pvz., paspaudus `p' bus `6')"
-
-#~ msgid "not connected"
-#~ msgstr "nepajungtas"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Vieta"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Mokslinës programos"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Serveris, Bylø/Spausdinimo/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Serveris, DNS/DHCP "
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pirmasis DNS serveris"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Antrasis DNS serveris"
-
-#~ msgid "using module"
-#~ msgstr "naudojamas modulis"
-
-#~ msgid "Development, Database"
-#~ msgstr "Kûrimas, Duomenø bazës"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Kûrimo, Integruotos Aplinkos"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Kûrimo, Standartinës priemonës"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Perspëjimas:\n"
-#~ "Pakeitimø pritaikymas veikiant X gali baigtis avarija."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Jeigu tæsite að iðjungsiu jûsø %s aplinkà"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s jau naudojama"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Tai ne pagrindinis skirsnis, praðom pasirinkti kità"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(gali sugadinti duomenis)"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serijinë)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI pelë"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Pridëti paketø suradimo vietà"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Kada %s skirsnis %s, "
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modemas"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Visos naujai nustatytos sritys norint jas naudoti turi bûti "
-#~ "suformatuotos\n"
-#~ "(formatavimas reiðia falinës sistemos sukûrimà). Dabar jûs gal bût "
-#~ "norite\n"
-#~ "iðnaujo suformatuoti jau formatuotas sritis, kad iðtrinti jose esanèius\n"
-#~ "duomenis. Atminkite kad iðnaujo formatuoti jau formatuotas sitis nëra\n"
-#~ "bûtina, nes jose gali bûti reikalinga informacija."
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB pelë"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB pelë (2 klaviðai)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB pelë (3+ klaviðai)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB pelë"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB pelë (2 klaviðai)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB pelë (3+ klaviðai)"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Ar tu tikri, kad esi ekspertas? \n"
-#~ "tau bus leidþiama daryti galingus, bet ir pavojingus dalykus èia.\n"
-#~ "\n"
-#~ "Tavæs bus klausiama, pvz: ¥Naudoti ðeðëlinæ bylà slaptaþodþiams?´,\n"
-#~ "ar esi pasiruoðæ atsakyti á tokius klausimus?"
-
-#~ msgid ""
-#~ "At this point, you need to choose what\n"
-#~ "partition(s) to use to install your new Mandrake Linux system. If "
-#~ "partitions\n"
-#~ "have been already defined (from a previous installation of GNU/Linux or "
-#~ "from\n"
-#~ "another partitioning tool), you can use existing partitions. In other "
-#~ "cases,\n"
-#~ "hard drive partitions must be defined.\n"
-#~ "\n"
-#~ "\n"
-#~ "To create partitions, you must first select a hard drive. You can select "
-#~ "the\n"
-#~ "disk for partitioning by clicking on \"hda\" for the first IDE drive, "
-#~ "\"hdb\" for\n"
-#~ "the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "To partition the selected hard drive, you can use these options:\n"
-#~ "\n"
-#~ "   * Clear all: this option deletes all partitions available on the "
-#~ "selected hard drive.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Auto allocate:: this option allows you to automatically create Ext2 "
-#~ "and swap partitions in free space of your\n"
-#~ "     hard drive.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Rescue partition table: if your partition table is damaged, you can "
-#~ "try to recover it using this option. Please\n"
-#~ "     be careful and remember that it can fail.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Undo: you can use this option to cancel your changes.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Reload: you can use this option if you wish to undo all changes and "
-#~ "load your initial partitions table\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Wizard: If you wish to use a wizard to partition your hard drive, "
-#~ "you can use this option. It is recommended if\n"
-#~ "     you do not have a good knowledge in partitioning.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Restore from floppy: if you have saved your partition table on a "
-#~ "floppy during a previous installation, you can\n"
-#~ "     recover it using this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Save on floppy: if you wish to save your partition table on a floppy "
-#~ "to be able to recover it, you can use this\n"
-#~ "     option. It is strongly recommended to use this option\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Done: when you have finished partitioning your hard drive, use this "
-#~ "option to save your changes.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, you can reach any option using the keyboard: navigate "
-#~ "trough the partitions using Tab and Up/Down arrows.\n"
-#~ "\n"
-#~ "\n"
-#~ "When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "           * Ctrl-c to create a new partition (when a empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "           * Ctrl-d to delete a partition\n"
-#~ "\n"
-#~ "           * Ctrl-m to set the mount point\n"
-#~ "           \n"
-#~ "\n"
-#~ "           \n"
-#~ "If you are installing on a PPC Machine, you will want to create a small "
-#~ "HFS 'bootstrap' partition of at least 1MB for use\n"
-#~ "by the yaboot bootloader. If you opt to make the partition a bit larger, "
-#~ "say 50MB, you may find it a useful place to store \n"
-#~ "a spare kernel and ramdisk image for emgergency boot situations."
-#~ msgstr ""
-#~ "Dabar tu turi pasirinkti, kuriuos skirsnius naudoti tavo naujai Mandrake "
-#~ "Linux \n"
-#~ "sistemai ádiegti. Jei skirsniai jau buvo apibrëþti (ið praeito ádiegimo "
-#~ "arba kitu dalinimo árankiu),\n"
-#~ "tu gali naudoti esanèius skirsnius. Kitu atveju, skirsniai turi bûti "
-#~ "apibrëþti.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad sukurtum skirsnius, tu pirmiausia turi pasirinkti kietàjá diskà. "
-#~ "Diskà dalinimui\n"
-#~ "gali pasirinkti, paspaudæs ant \"hda\" jei nori pirmo IDE kaupiklio, \"hdb"
-#~ "\" -- antro,\n"
-#~ "arba \"sda\", jei renkiesi pirmàjá SCSI kaupiklá ir t.t.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad sudalintum skirsniais pasirinktà kietàjá diskà, gali naudotis vienu "
-#~ "ið ðiø variantø:\n"
-#~ "\n"
-#~ "   * Iðvalyti viskà: ðis variantas iðtrina visus skirsnius, esanèius "
-#~ "pasirinktame kietajame diske.\n"
-#~ "\n"
-#~ "\n"
-#~ "    * Automatiðkai paskirti: ðis variantas leidþia automatiðkai sukurti "
-#~ "Ext2 bei swap skirsnius laisvoje tavo\n"
-#~ "     disko vietoje.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Iðgelbëti skirsniø lentelæ: jei disko skirsniø lentelë yra "
-#~ "sugadinta, tu gali bandyti atstatyti jà su ðiuo variantu.\n"
-#~ "     Bûk atsargus ir prisimink, kad tai gali nepavykti.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atðaukti: tu gali naudoti ðá variantà, kad atðauktum visus tavo "
-#~ "pakeitimus.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Ið naujo: tu gali rinktis ðá variantà, kad atsisakytum visø savo "
-#~ "pakeitimø ir ákeltum pradinæ skirsniø lentelæ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Meistras: jei tu nori, kad meistras tau padëtø sudalinti kietàjá "
-#~ "diskà, rinkis ðá variantà. Tai rekomenduojama, jeigu\n"
-#~ "     tu nelabai iðmanai apie skirsniø dalinimà.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atkurti ið diskelio: jei tu iðsaugojai savo skirsniø lentelæ á "
-#~ "diskelá ádiegdamas praeità kartà, tu gali atkurti jà\n"
-#~ "     naudodamasis ðiuo variantu.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Iðsaugoti á diskelá: jei tu nori iðsaugoti savo skirsniø lentelæ á "
-#~ "diskelá, kad galëtum paskui atkurti jà, rinkis ðá\n"
-#~ "     variantà. labai rekomenduojama, kad tu tai padarytum.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atlikta: jei tu baigei dalinti savo kietàjá diskà, rinkis ðá "
-#~ "variantà, kad iðsaugotum visus pakeitimus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tavo þiniai, tu gali pasiekti bet kurá variantà naudodamasis klaviatûra: "
-#~ "vaikðèiok tarp skirsniø su Tab bei\n"
-#~ "Aukðtyn/Þemyn rodyklëmis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai skirsnis yra parinktas, gali naudoti:\n"
-#~ "\n"
-#~ "* Ctrl-c kad sukurtum naujà skirsná (jei parinktas tuðèias skirsnis)\n"
-#~ "\n"
-#~ "* Ctrl-d kad iðtrintum skirsná.\n"
-#~ "\n"
-#~ "* Ctrl-m kad nurodytum prijungimà taðkà."
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Auto ádiegimo diskelis"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Automatinë skiriamoji geba"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automatinë skiriamosios gebos paieðka"
-
-#~ msgid "Available packages"
-#~ msgstr "Prieinami paketai"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Bloga kickstart byla %s (nepavyko %s)"
-
-#~ msgid "Cable connecion"
-#~ msgstr "Kabelinë jungtis"
-
-#~ msgid "Category"
-#~ msgstr "Kategorijà"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Pokalbiø (IRC arba instant messaging) programos, kaip xchat, licq, gaim, "
-#~ "ir bylø siuntimo programos"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Tikrinamos priklausomybës"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Pasirinkite \"Ádiegti\" jeigu nebuvo ádiegta ankstesniø GNU/Linux "
-#~ "versijø\n"
-#~ "arba jûs norite turëti jø keletà.\n"
-#~ "\n"
-#~ "Pasirinkite \"Iðgelbëti\" jeigu norite iðgelbëti jau ádiegtà Mandrake "
-#~ "Linux \n"
-#~ "\n"
-#~ "\n"
-#~ "Pasirinkite:\n"
-#~ "\n"
-#~ " - Rekomenduojama: Jeigu jums ansèiau nëra tekæ ádiegti GNU/Linux.\n"
-#~ "\n"
-#~ " - Vartotojiðka: Jeigu jau turëjote reikalø su GNU/Linux. Galësite "
-#~ "pasirinkti\n"
-#~ "pirminæ kompiuterio funkcijà\n"
-#~ "\n"
-#~ " - Eksperto: Jeigu jûs puikiai sekasi su GNU/Linux iðspræsti rimtas "
-#~ "uþduotis.\n"
-#~ "Kaip ir konfiguracijoje \"Vartotojiðka\" jûs galësite pasirinkti koks "
-#~ "bus\n"
-#~ "ðios sistemos panaudojimas.\n"
-#~ "   Bet Praðome, Praðome NESIRINKITE TAI, APIE KÀ JÛS NIEKO NEÞINOTE!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Pasirinkite \"Ádiegti\" jeigu nebuvo ádiegta ankstesniø Linux versijø "
-#~ "arba\n"
-#~ "jûs norite turëti jø keletà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pasirinkite \"Atnaujinti\" jeigu norite atnaujinti ankstesnes Mandrake\n"
-#~ "Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 arba 7.0 (Air)."
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Ádiegti ar atnaujinti"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Pasirinkite kità CD ádiegimui"
-
-#~ msgid "Collapse all"
-#~ msgstr "Iðskleisti visus"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Bendravimo priemonës"
-
-#~ msgid "Configure local network"
-#~ msgstr "Nustatyti vietiná tinklà"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nustatyti interneto jungtá / Nustatyti vietiná tinklà"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Nurodyti laiko juostà"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Patvirtink slaptaþodá"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografija"
-
-#~ msgid "Customized"
-#~ msgstr "Prisitaikyta"
-
-#~ msgid "Czech"
-#~ msgstr "Èekø"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Duomenø baziø klientai ir serveriai (mysql bei postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Kûrimas C/C++"
-
-#~ msgid "Directory"
-#~ msgstr "Katalogas"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Uþdrausti interneto jungtá"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Ar Jûs norite nustatyti savo modemo dialup prisijungimà?"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Ar Jûs norite nustatyti savo sistemos vietiná tinklà?"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Ar norite naudoti LILO?"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Parsiunèiami ðifruoti paketai"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "Pirmiausia DrakX pabandys paieðkoti PCI ir SCSI árenginiø. Jeigu jis "
-#~ "suras\n"
-#~ "ir þinos kokias tvarkykles jam (jiems) naudoti jis automatiðkai jas "
-#~ "ádës.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jûsø SCSI árenginys yra ISA plokðtë arba DrakX neþinos kaip já "
-#~ "valdyti\n"
-#~ "arba jûs iðvis jo neturite jums bus praneðta. Jeigu jûs neturite, "
-#~ "atsakykite\n"
-#~ "\"Ne\". Jeigu turite vienq arba daugiau atsakykite \"Taip\" ir tvarkykliø "
-#~ "sàraðas\n"
-#~ "bus jums parodytas\n"
-#~ "\n"
-#~ "\n"
-#~ "Kai jûs pasirinksite tvarkyklæ, DrakX papraðys nurodyti jos nustatymus.\n"
-#~ "Pirmiausia leiskite árangai paèiai nusistatyti. Daþnai tai puikiai "
-#~ "suveikia\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jums nepavyks, nepamirðkite, kad informacijos apie jûsø árangà "
-#~ "gali\n"
-#~ "suteikti dokumentacija arba Windows (jeigu jûs turite ðià sistemà).\n"
-#~ "Tai tuos nustatymus jûs turite perduoti tvarkyklei."
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modemas"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Startuojant ájungti Num Lock"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Ádëkite diskelá á kaupiklá, kad sukurti HTP diskelá\n"
-#~ "(Visi duomenys esantys dikelyje bus prarasti)"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Viskas sukonfiguruota.\n"
-
-#~ msgid "Expand all"
-#~ msgstr "Iðskleisti visus"
-
-#~ msgid "Find Package"
-#~ msgstr "Rasti paketà"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Rasti bylà su atitinkamu paketu"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Ieðkoma lapø"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Lapø ieðkojimas ðiek tiek uþtruks"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ir HTTP metodams tu turi nurodyti vietà, kur yra hdlist\n"
-#~ "Ji turi bûti nurodyta santykinai aukðèiau esanèiam URL"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Ar pamirðti pakeitimus?"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Paprasta 3 klaviðø pelë (serijinë)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Paprasta pelë (serijinë)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serijinë)"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Nurodyk vardà (pvz: `extra', `commercial')"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Ruoðiamasi ádiegti %d MB. Jûs galite pasirinkti daugiau programø"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ruoðiamasi iðmesti áraðà %s"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Grafinë sàsaja"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO turi sekanèius áraðus.\n"
-#~ "Jûs galite pakeisti esamus arba pridëti naujø."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Að galiu pabandyti surasti prieinamà skiriamàjà gebà (pvz.: 800x600).\n"
-#~ "Bet kompiuteris gali \"pakibti\"\n"
-#~ "Ar Jûs norite pabandyti?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Að radau ISDN plokðtæ:\n"
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Jeigu DrakX nepavyko surasti jûsø pelës arba jûs pats norite jà\n"
-#~ "nurodyti; jums bus parodytas sàraðas\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jûs sutinkate su DrakX nustatymais tiesiog paspauskite OK.\n"
-#~ "Kitokiu atveju pasirinkite pelæ kuri jums labiausiai tinka.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu pas jus yra pelë su serijine jungtimi jums taip pat reikës "
-#~ "nurodyti\n"
-#~ "prie kokios jungties ji yra prijungta."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Jei tavo ADSL modemas yra Alcatel, pasirink Alcatel, kitu atveju -- ECI."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Kurioje valstybëje tu dabar esi?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Ádiegti/Iðgelbëti"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO ádiegimas nepavyko. Ávyko sekanti klaida:"
-
-#~ msgid "Installed packages"
-#~ msgstr "Ádiegti paketai"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Interneto árankiai"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Ádiegimà reikia perstartuoti ið diskelio"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Ádiegimà reikia perstartuoti su naujais parametrais"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Labai rekomenduojama èia pasirinkti \"Taip\". Jeigu jûs vëliau \n"
-#~ "ádieginësite Microsoft Windows ji naujai uþraðys startavimo sektoriø.\n"
-#~ "Tada nepadaræ startavimo diskelio kaip mes patarëje nebegalësite\n"
-#~ "startuoti GNU/Linux."
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) gali startuoti ir kitas Operacines sistemas.\n"
-#~ "Normaliai jos yra tinkamai nustatomos per ádiegiant. Jeigu jûsø sistema\n"
-#~ "neaptikta jûs dabar galite pridëti vienà arba keletà.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jûs nenorite kuriø nors naudoti galite iðimti (tada startavimo\n"
-#~ "diskelis gai uþkrauti tà sistemà)."
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Tiesus (reikalingas keletui SCSI kaupikliø)"
-
-#~ msgid "Local LAN"
-#~ msgstr "Lokalus LAN"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Vietinis tinklas jau buvo sukonfigûruotas.\n"
-#~ "Ar tu nori:"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech pelë"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serijinë)"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft pelë"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft 2.1A arba vëlesnës Rev (serijinë)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Suderinama su Microsoft (serijinë)"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Pajudinkite ratukà!"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Tinklo adapteris 1 (eth0):"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Cdrom neprieinamas (nieko nëra /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Nieko nerasta"
-
-#~ msgid "No more match"
-#~ msgstr "Daugiau nieko nerasta"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Nerasta galimø variantø\n"
-#~ "Pabandykite kità video plokðtæ arba monitoriø"
-
-#~ msgid "Other countries"
-#~ msgstr "Kitos valstybës"
-
-#~ msgid "Package"
-#~ msgstr "Paketas"
-
-#~ msgid "Password:"
-#~ msgstr "Slaptaþodis:"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Praðome pasirinkti skirsná, kurá Jûs naudosite kaip pagrindiná."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Praðom patvirtinti sekanèià informacijà"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, bibliotekos, árankiai"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Konfigûruojama..."
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Rescue"
-#~ msgstr "Iðgelbëti"
-
-#~ msgid "SILO main options"
-#~ msgstr "Bendri SILO nustatymai"
-
-#~ msgid "Sciences"
-#~ msgstr "Mokslai"
-
-#~ msgid "Sciencific Workstation"
-#~ msgstr "Mokslinës darbo stotis"
-
-#~ msgid "Search"
-#~ msgstr "Paieðka"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Ieðkomas pagrindinis skirsnis."
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Pasirink dydá, kiek nori ádiegti"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Pasirinkite:\n"
-#~ "\n"
-#~ " - Rekomenduojama: Jeigu jums ansèiau nëra tekæ ádiegti Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Vartotojiðka: Jeigu jau turëjote reikalø su Linux. Galësite "
-#~ "pasirinkti\n"
-#~ "\"Normali\" bendros reikðmës sistemos ádiegimui, \"Kûrimo\" jeigu "
-#~ "naudojate\n"
-#~ "savo kompiuterá kurti programoms ir \"Serverinë\" jeigu norite turëti "
-#~ "bendros paskirties (pvz. paðto, spausdintuvo...) serverá.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Eksperto: Jeigu jûs puikiai sekasi su GNU/Linux iðspræsti rimtas "
-#~ "uþduotis.\n"
-#~ "Kaip ir konfiguracijoje \"Vartotojiðka\" jûs galësite pasirinkti koks "
-#~ "bus\n"
-#~ "ðios sistemos panaudojimas."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Nustatyti SCSI"
-
-#~ msgid "Show less"
-#~ msgstr "Rodyti maþiau"
-
-#~ msgid "Show more"
-#~ msgstr "Rodyti daugiau"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Rodyti tik lapus"
-
-#~ msgid "Shutting down"
-#~ msgstr "Bandoma iðjungti"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Dydis: %s MB"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovakø"
-
-#~ msgid "Sort by"
-#~ msgstr "Rûðiuoti pagal"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Sekanèius paketus ruoðiamasi iðmesti"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Dabar yra ádiegiami paketai, kuriuos jûs pasirinkote. Tai turëtø\n"
-#~ "keletà minuèiø uþtrukti, taèiau jeigu jûs pasirinkote atnaujinti\n"
-#~ "tai turëtø uþtrukti kiek ilgiau."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Ði þymë jau naudojama"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ði sekcija yra skirta vietinio tinklo (LAN) nustatymui.\n"
-#~ "\n"
-#~ "Jeigu jûs pasakyrite \"Taip\" DrakX pabandys pats surasti tinklo kortà.\n"
-#~ "PCI árenginys turëtø bûti surastas ir prijungtas automatiðkai. Taèiau\n"
-#~ "jeigu jûsø turite ISA árenginá automatinis aptikimas nesuveiks ir jûs\n"
-#~ "turësite nurodyti tvarkyklæ ið sàraðo, kuris tada pasirodys.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dël SCSI árenginiø, leiskite tvarkyklei pirmiau paèiai pabandyti "
-#~ "árenginá,\n"
-#~ "nes kitokio atveju jums teks nurodyti nustatymus ið Windows Control "
-#~ "Panel\n"
-#~ "konfiguracijos\n"
-#~ "\n"
-#~ "\n"
-#~ "Jeigu jûs ádiegiate Mandrake Linux á kompiuterá, kuris jau yra tinkle\n"
-#~ "tinklo administratorius jums turi nurodyti informacijà apie IP adresà,\n"
-#~ "tinklo subkaukæ ir tinklo kaukæ. Ádiegiant privaèiam tinkle namuose, jums "
-#~ "tai\n"
-#~ "reikës pasirinkti paèiam."
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Að pabandysiu ávairias galimas skiriamasias gebas.\n"
-#~ "Jûsø ekranas mirgës...\n"
-#~ "Jeigu norite, galite já iðjungti, Jûs iðgirsite pyptelëjimà, kai bus "
-#~ "baigta"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Perjungti tarp ádiegtø ir prieinamø"
-
-#~ msgid "Tree"
-#~ msgstr "Medis"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Ar bandyti surasti %s árenginius"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Ar bandyti surasti PCI árenginius"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Ar pabandyti surasti PCMCIA kortas?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Ar bandyti surasti modemà?"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL katalogo, kuriame yra RPM'ai"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB pelë (su 3 arba daugiau klaviðø)"
-
-#~ msgid "Update location"
-#~ msgstr "Atnaujinti suradimo vietà"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Atnaujinama RPM bazë"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Naudoti MD5 slaptaþodþius"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Naudoti DiskDrake"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Naudoti ðeðëlinæ bylà"
-
-#~ msgid "User name:"
-#~ msgstr "Vartotojo vardas:"
-
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Sveiki, besinaudojantys LILO, operaciniu sistemu ikrovos tvarkykle!\n"
-#~ "\n"
-#~ "Noredami suzinoti pasirinkimu sarasa, spauskite <TAB>.\n"
-#~ "\n"
-#~ "Noredami ijungti viena is ju, irasykite jo pavadinima ir spauskite "
-#~ "<ENTER>\n"
-#~ "arba laukite %d sekundziu ijungimo pagal nutylejima.\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Sveiki, besinaudojantys SILO, operaciniu sistemu ikrovos tvarkykle!\n"
-#~ "\n"
-#~ "Noredami suzinoti pasirinkimu sarasa, spauskite <TAB>.\n"
-#~ "\n"
-#~ "Noredami ijungti viena is ju, irasykite jo pavadinima ir spauskite "
-#~ "<ENTER>\n"
-#~ "arba laukite %d sekundziu ijungimo pagal nutylejima.\n"
-#~ "\n"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Ko ieðkai?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Kokia Jûsø pelës rûðis?"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Koks Jûsø klaviatûros iðdëstymas"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Kam bus naudojama tavo sistema?"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Koks Jûsø vartojimas?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kokià ákrovos tvarkyklæ(-es) tu norëtum naudoti?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Kurios bylos ieðkai?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Kurio paketo ieðkai"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Kokio tipo skirsná norite turëti?"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Prie kurios nuosekliosios jungties prijungta tavo pelë?"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Jums neuþtenka vietos Lnx4win"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Dabar jûs galite pasirinkti kokius norite ádiegti paketus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pirmiausia jûs galite pasirinkti, kokià paketø grupæ jûs norite ádiegti\n"
-#~ "arba atnaujinti. Po to jûs galite pasirinkti paketus, kurius jûs norite\n"
-#~ "ádiegti priklausomai nuo vietos kiek tam skiriate.\n"
-#~ "\n"
-#~ "\n"
-#~ "Informacija apie konkreèius paketus galite pamatyti lauke, pavadintame\n"
-#~ " \"Info\" kuris yra deðinëje paketø sàraðo pusëje."
-
-#~ msgid "automagic"
-#~ msgstr "Automagic"
-
-#~ msgid "beginner"
-#~ msgstr "pradedantysis"
-
-#~ msgid "brunette"
-#~ msgstr "brunetë"
-
-#~ msgid "changing type of"
-#~ msgstr "keièiamas "
-
-#~ msgid "default"
-#~ msgstr "Pagrindinis"
-
-#~ msgid "developer"
-#~ msgstr "programuotojas"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "nenaudoti pppoe"
-
-#~ msgid "girl"
-#~ msgstr "mergina"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (svarbu)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (nuostabu)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (labai gerai)"
-
-#~ msgid "linear"
-#~ msgstr "Tiesus"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs prijungimas nepavyko"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake dabar yra ¥atminties taupymo´ reþime.\n"
-#~ "Að paleisiu rpmdrake ið naujo, kad galëtum ieðkoti bylø"
-
-#~ msgid "tie"
-#~ msgstr "tie"
-
-#~ msgid "useless"
-#~ msgstr "nenaudinga"
-
-#~ msgid "vertical traditionnal aurora"
-#~ msgstr "vertikali tradicinë aurora"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondinë"
diff --git a/perl-install/share/po/lv.po b/perl-install/share/po/lv.po
deleted file mode 100644
index 206302fd7..000000000
--- a/perl-install/share/po/lv.po
+++ /dev/null
@@ -1,12830 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Copyright (c) 2000 MandrakeSoft
-# Vitauts Stochka <vit@dpu.lv>, 2000.
-# Juris Kudiòð <cooker@inbox.lv>, 2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-22 00:12+0200\n"
-"Last-Translator: Juris Kudiòð <cooker@inbox.lv>\n"
-"Language-Team: Latvian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-13\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigurât visus ekrânus neatkarîgi"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Lietot Xinerama piebûvi"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurât tikai karti \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "N-ekrânu konfigurâcija"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Jûsu sistçma atbalsta n-ekrânu konfigurâciju.\n"
-"Ko nu darîsim?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafiskâ karte"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izvçlieties grafisko karti"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izvçlieties X serveri"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Izvçlieties X serveri"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X serveris"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kuru XFree konfigurâciju izvçlaties?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Jûsu karte spçj nodroðinât 3D akselerâciju, bet tikai ar XFree %s.\n"
-"Jûsu karti uztur XFree %s, kam var bût labâks 2D atbalsts."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Jûsu karte spçj nodroðinât 3D akselerâciju ar XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ar aparatûras 3D akselerâciju"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Jûsu karte spçj nodroðinât 3D akselerâciju ar XFree %s.\n"
-"ÒEMIET VÇRÂ, KA TAS IR EKSPERIMENTÂLS ATBALSTS, KAS VAR UZKÂRT DATORU."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ar EKSPERIMENTÂLU aparatûras 3D akselerâciju"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Jûsu karte spçj nodroðinât 3D akselerâciju, bet tikai ar XFree %s,\n"
-"ÒEMIET VÇRÂ, KA TAS IR EKSPERIMENTÂLS ATBALSTS, KAS VAR UZKÂRT DATORU.\n"
-"Jûsu karti uztur XFree %s, kam var bût labâks 2D atbalsts."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigurâcija"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Izvçlieties grafiskâs kartes atmiòas apjomu"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Norâdiet servera opcijas"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Norâdiet monitoru"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitors"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Divi svarîgâkie parametri ir vertikâlâ pârzîmçðanas frekvence, kas nosaka\n"
-"visa ekrâna pârzîmçðanas bieþumu, un horizontâlâs sinhronizâcijas\n"
-"frekvence, kas nosaka skançðanas lîniju parâdîðanas bieþumu.\n"
-"\n"
-"Ir ÏOTI SVARÎGI, lai jûs nenorâdîtu monitora tipu, kura sinhronizâcijas\n"
-"frekvence pârsniedz jûsu monitora iespçjas: jûs varat sabojât savu "
-"monitoru.\n"
-" Ja neesat pârliecinâts, izvçlieties konservatîvâko variantu."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontâlâ frekvence"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikâlâ frekvence"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitors nav konfigurçts"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafiskâ karte vçl nav konfigurçta"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Izðíirtspçjas vçl nav izvçlçtas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Brîdinâjums: ðîs grafiskâs kartes izmçìinâðana var uzkârt datoru"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Konfigurâcijas izmçìinâðana"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"mçìiniet izmainît daþus parametrus"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Atklâta kïûda:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Atliek %d sekundes"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Vai viss ir pareizi?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Atklâta kïûda, mçìiniet izmainît daþus parametrus"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Izðíirtspçja"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Norâdiet izðíirtspçju un krâsu dziïumu"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafiskâ karte: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 serveris: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Vairâk"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Labi"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Eksperta reþîms"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Parâdît visu"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Izðíirtspçjas"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatûras izkârtojums: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Peles tips: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Peles ierîce: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitors: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitora horiz. frekv.: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitora vert. frekv.: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafiskâ karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafiskâ karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafiskâ atmiòa: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Krâsu dziïums: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Izðíirtspçja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 serveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 draiveris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Gatavoju X-Window konfigurâciju"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ko jûs vçlaties darît?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitora maiòa"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Grafiskâs kartes maiòa"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Servera opciju maiòa"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Izðíirtspçjas maiòa"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Parâdît informâciju"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Mçìinât vçlreiz"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Iziet"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Saglabât izmaiòas?\n"
-"Paðreizçjâ konfigurâcija ir:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X pçc startçðanas"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Datoru var konfigurçt, lai pçc sistçmas ielâdes automâtiski startçtu X.\n"
-"Vai vçlaties, lai pçc pârstartçðanas tiktu palaists X?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Lai aktivizçtu izmaiòas, lûdzu aizveriet un atveriet %s sesiju"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lûdzu aizveriet sesiju un nospiediet Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 krâsas (8 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tûkstoði krâsu (15 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tûkstoði krâsu (16 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoni krâsu (24 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardi krâsu (32 biti)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB vai vairâk"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Parasts VGA, 640x480 pie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 pie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 savietojams, 1024x768 pie 87 Hz ar joslâm (nav 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 pie 87 Hz ar joslâm, 800x600 pie 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Uzlabots Super VGA, 800x600 pie 60 Hz, 640x480 pie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ne-joslots SVGA, 1024x768 pie 60 Hz, 800x600 pie 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Augstas frekvences SVGA, 1024x768 pie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvenèu, kas uztur 1280x1024 pie 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekcenèu, kas uztur 1280x1024 pie 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvenèu, kas uztur 1280x1024 pie 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitors, kas uztur 1600x1200 pie 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitors, kas uztur 1600x1200 pie 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Sâknçjamâs partîcijas pirmais sektors"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Diska pirmais sektors (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalçðana"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kur jûs vçlaties instalçt sâknçtâju?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalçðana"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Sâknçtâja galvenâs opcijas"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Kuru OS ielâdçtâju lietot"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Sâknçtâja instalçðana"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Sâknçjamâ ierîce"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nedarbojas ar veciem BIOSiem)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakts"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakts"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video reþîms"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pauze pirms noklusçtâs sistçmas ielâdes"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Parole"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Parole (atkârtoti)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ierobeþot komandrindas opcijas"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ierobeþot"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Iztîrît /tmp katras sâknçðanas laikâ"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ja nepiecieðams, precizçjiet RAM apjomu (atrasti %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Atïaut multi profilus"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Norâdiet atmiòas apjomu Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcijai ``Ierobeþot komandrindas opcijas'' nav jçgas bez paroles"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Lûdzu mçìiniet vçlreiz"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Paroles nesakrît"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Noklusçtâ OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ðeit ir daþâdi sâknçðanas ieraksti.\n"
-"Jûs varat pievienot jaunus vai izmainît esoðos."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Pievienot"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Izdarîts"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Mainît"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kâda veida ierakstu gribat pievienot"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Cita OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Cita OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Cita OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Attçls"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Sakne"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Papildinât"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lasît-rakstît"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabula"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nedroðs"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Nosaukums"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Noklusçts"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-izmçrs"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "BezVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Izdzçst ierakstu"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tukðs nosaukums nav atïauts"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Jums ir nepiecieðama swap partîcija"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ðis nosaukums jau ir izmantots"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Atrasti %s %s interfeisi"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Vai ir vçl kâds?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Vai datorâ ir kâds %s interfeiss?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nç"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Jâ"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Apskatît dzelþu informâciju"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalçju draiveri %s kartei %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulis %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kuru %s draiveri pamçìinât?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Daþos gadîjumos %s draiverim ir jânorâda papildus informâcija, lai tas\n"
-"darbotos pareizi, tomçr parasti tâ nav vajadzîga. Vai vçlaties norâdît\n"
-"papildus parametrus, vai arî ïausit draiverim aptaujât datoru un savâkt\n"
-"nepiecieðamo informâciju? Retos gadîjumos aptaujâðana var uzkârt datoru,\n"
-"taèu tas neradîs nekâdus bojâjumus."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Aptaujât"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Norâdît opcijas"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Tagad jûs varat norâdît moduïa %s opcijas.\n"
-"Opciju formâts ir ``nosaukums=vçrtîba nosaukums2=vçrtîba2 ...''.\n"
-"Piemçram, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Moduïa opcijas:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Moduïa %s ielâde bija neveiksmîga.\n"
-"Vai vçlaties pamçìinât ar citiem parametriem?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(jau pievienots %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ðî parole ir pârâk vienkârða"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Lûdzu ievadiet lietotâja vârdu"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Lietotâja vârdâ var bût tikai mazie angïu burti, cipari, `-' un `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ðâds lietotâja vârds jau ir pievienots"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Pievienot lietotâju"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Ievadiet lietotâju\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Apstiprinât lietotâju"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Vârds un uzvârds"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Lietotâja vârds"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Èaula"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autoreìistrçðanâs"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Sistçmu var konfigurçt tâ, lai pçc startçðanas automâtiski tiktu\n"
-"atvçrta viena noteikta lietotâja sesija. \n"
-"Ja nevçlaties izmantot ðo iespçju, nospiediet atcelðanas pogu."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Norâdiet noklusçto lietotâju:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Norâdiet izmantojamo logu menedþeri:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Lûdzu izvçlieties izmantojamo valodu."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Jûs varat izvçlçties citas valodas, kas bûs pieejamas pçc instalçðanas"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Viss"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Lietotâju pievienoðana"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Pielâgota"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS startçðana"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Ðo pakotni ir nepiecieðams uzlabot\n"
-"Vai tieðâm vçlaties atteikties no tâs?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Atcelt"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Sveiciens hakeriem"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Vâjð"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standarta"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Augsts"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Augsts"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoisks"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ðo lîmeni ir jâizmanto uzmanîgi. Tas padara jûsu sistçmu vieglâk\n"
-"izmantojamu, taèu ïoti nedroðu: to nedrîkst izmantot datoram, kas ir\n"
-"pieslçgts citiem datoriem vai Internetam. Netiek prasîtas paroles."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Tagad tiek izmantota parole, taèu izmantot datoru tîklâ vçl aizvien\n"
-"nav ieteicams."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ðis ir parasts droðîbas lîmenis, kas ir ieteicams datoram, kas tiks\n"
-"izmantots kâ klients Interneta pieslçgumam. Tagad tiek pârbaudîta droðîba. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ar ðo droðîbas lîmeni sistçmu var sâkt izmantot kâ serveri.\n"
-"Droðîba tagad ir pietiekoði augsta, lai izmantotu sistçmu kâ serveri, kas\n"
-"apkalpo pieslçgumus no daudziem klientiem. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Mçs izmantojam 4. lîmeòa iespçjas, taèu tagad sistçma ir pilnîbâ\n"
-"aizslçgta. Droðîba tagad ir maksimâlajâ lîmenî."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izvçlieties droðîbas lîmeni?"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Uzstâdu droðîbas lîmeni"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Norâdiet servera opcijas"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Juus sveic %s, opereetaajsisteemu paarsleedzeejs!\n"
-"\n"
-"Sarakstaa izveelieties vajadziigo sisteemu vai gaidiet %d sekundes, liidz "
-"tiks ielaadeeta nokluseetaa sisteema.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Juus sveic GRUB, opereetaajsisteemu izveeles programma!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Izmantojiet taustinus %c un %c, lai izveeleetos vajadziigo ierakstu."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Nospiediet ievadu, lai saakneetu izveeleeto OS, 'e', lai redigeetu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandas pirms saakneesanas, vai 'c', lai izsauktu komandrindu."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Izdaliitais ieraksts tiks saakneets peec %d sekundeem."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nepietiek vietas partîcijâ /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Darbavirsma"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Starta izvçlne"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kur jûs vçlaties instalçt sâknçtâju?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "palîdzîba pagaidâm nav realizçta.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Sâknçðanas stila konfigurçðana"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fails"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fails/_Beigt"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Kategorizçjoðs Monitors"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitors"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionâlais Monitors"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionâlais Gtk+ Monitors"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Palaist Aurora sâknçðanas laikâ"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub reþîms"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot reþîms"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jûs paðlaik lietojat OS ielâdçtâju %s.\n"
-"Spiediet Konfigurçt, lai palaistu uzstâdîðanas meistaru."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurçt"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistçmas reþîms"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Palaist X-Window sistçmu sâknçðanas laikâ"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nç, negribu lietot autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Jâ, gribu lietot autologin ðim lietotâjam un darba virsmai"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Labi"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "lasîðanai nevar atvçrt /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minûtes"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minûte"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundes"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Vairâk partîciju nevar pievienot"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Jûs varat izvçlçties citas valodas, kas bûs pieejamas pçc instalçðanas"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Francijas"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Beïìijas"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Vâcijas"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grieíijas"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norvçìijas"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Zviedrijas"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Itâlijas"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seriâla"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Vispirms izveidojiet datu rezerves kopiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lasiet uzmanîgi!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ja gatavojaties izmantot aboot, neaizmirstiet atstât brîvu vietu diska\n"
-"sâkumâ (pietiek ar 2048 sektoriem)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Kïûda"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Meistars"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izvçlieties darbîbu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Jums ir viena liela FAT partîcija\n"
-"(parasti to izmanto MicroSoft Dos/Windows).\n"
-"Iesaku vispirms izmainît ðîs partîcijas izmçru\n"
-"(uzklikðíiniet uz tâs, tad uz \"Mainît izmçru\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Lûdzu uzklikðíiniet uz partîcijas"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaïas"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "montçðana neizdevâs"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tukðs"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Cits"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Failu sistçmu tipi:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Izveidot"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tips"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Tâ vietâ izmantojiet ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Izdzçst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Vispirms izmantojiet ``Nomontçt''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Pçc partîcijas %s tipa nomaiòas visi ðajâ partîcijâ esoðie dati tiks "
-"pazaudçti"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izvçlieties partîciju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izvçlieties citu partîciju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Iziet"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Pârslçgt eksperta reþîmâ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Pârslçgt normâlajâ reþîmâ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Atsaukt"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Tad turpinât?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Iziet nesaglabâjot"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Iziet neierakstot partîciju tabulau?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Izvietot automâtiski"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Visu dzçst"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Cietâ diska informâcija"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Visas primârâs partîcijas izmantotas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Vairâk partîciju nevar pievienot"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ja gribat vairâk partîcijas, izdzçsiet kâdu partîciju, lai varçtu izveidot "
-"paplaðinâto partîciju"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Ierakstît partîciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Salabot partîciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Salabot partîciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Salabot partîciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Izòemams datu nesçjs"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izvçlieties failu"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Partîciju tabulas rezerves kopijai ir atðíirîgs izmçrs\n"
-"Tomçr turpinât, ja?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Uzmanîbu"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ielieciet disketi\n"
-"Visi uz disketes esoðie dati tiks dzçsti"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Mçìinu saglâbt partîciju tabulu"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detalizçta informâcija"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Montçðanas punkts"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcijas"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Mainît izmçru"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Pârvietot"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatçt"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montçta"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Pievienot pie RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Pievienot LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Nomontçt"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Izslçgt no RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Izòemt no LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Mainît RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Izmantot priekð loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Izveidot jaunu partîciju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sâkuma sektors: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Izmçrs MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Failu sistçmas tips: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Montçðanas punkts: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Priekðroka: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatçju loopback failu %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Nomainît partîcijas tipu"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kuru failu sistçmu vçlaties?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kur jûs vçlaties montçt loopback failu %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kur jûs vçlaties montçt %s ierîci?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nevaru noòemt montçðanas punktu, jo ðî partîcija tiek izmantota priekð "
-"loopback.\n"
-"Vispirms noòemiet loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Izskaitïoju FAT failsistçmas robeþas"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mainu izmçru"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ðîs partîcijas izmçru nevar izmainît"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Visiem ðîs partîcijas datiem jâizveido rezerves kopijas"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Pçc partîcijas %s izmçra maiòas visi ðajâ partîcijâ esoðie dati tiks "
-"pazaudçti"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Norâdiet jauno izmçru"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Jauns izmçrs MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Uz kuru disku vçlaties to pârvietot?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektors"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Uz kuru sektoru vçlaties to pârvietot?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Pârvietoju"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Pârvietoju partîciju..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Norâdiet eksistçjoðu RAID, kam pievienot"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "jauns"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Norâdiet jau esoðu LVM kam pievienot"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM vârds?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ðo Partîciju nevar izmantot priekð loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback faila vârds: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Vârds un uzvârds"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Fails jau tiek izmantots citam loopback, norâdiet citu failu"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fails jau eksistç. Vai to izmantot?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Montçðanas iespçjas:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Viss kas"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ierîce"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "lîmenis"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "gabala izmçrs"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Esiet uzmanîgi: ðî operâcija ir bîstama."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kâds ir sadalîjuma tips?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Diemþçl es neïauðu izveidot /boot tik tâlu uz diska (uz cilindra > 1024).\n"
-"Vai nu jûs izmantojat LILO, un tas nestrâdâs, vai arî jûs neizmantojat LILO, "
-"un /boot jums nav vajadzîgs"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"partîcija, ko jûs izvçlçjâties pievienot kâ sakni (/), fiziski atrodas aiz\n"
-"ðî cietâ diska 1024. cilindra, un jums nav /boot partîcijas.\n"
-"Ja jûs plânojat izmantot LILO, neaizmirstiet pievienot /boot partîciju"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Jûs izvçlçjies programmatûras uzturçtu RAID partîciju kâ saknes partîciju "
-"(/).\n"
-"Neviens sâknçtâjs nespçj to izmantot bez /boot partîcijas.\n"
-"Tâpçc neaizmirstiet izveidot /boot partîciju."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Iekârtas %s partîciju tabula tiks ierakstîta uz diska!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Lai izmaiòas stâtos spçkâ, jums ir jâpârstartç dators"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Pçc partîcijas %s formatçðanas visi ðajâ partîcijâ esoðie dati tiks pazaudçti"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatçju"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatçju loopback failu %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatçju partîciju %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid neizdevâs"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nepietiek brîvas vietas, lai izvietotu jaunas partîcijas"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nepietiek brîvas vietas, lai izvietotu jaunas partîcijas"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Izðíirtspçja: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Ierîce: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS iekârtas burts: %s (tikai minçjums)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tips: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Vârds: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Sâkums: sektors %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Izmçrs: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektori"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "No cilindra %d lîdz cilindram %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatçta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neformatçta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montçta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback fails(i): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Noklusçti sâknçjamâ partîcija\n"
-"    (lai sâknçtu MS-DOS, nevis lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Lîmenis %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Gabala izmçrs %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID diski %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faila nosaukums: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Izmçrs: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ìeometrija: %s cilindri, %s galvas, %s sektori\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diski %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "partîciju tabulas tips: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "uz ðinas %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcijas: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Failu sistçmas tips: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Ðî parole ir pârâk vienkârða (jâbût vismaz %d simbolus garai)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Paroles nesakrît"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Mainît tipu"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Lûdzu uzklikðíiniet uz partîcijas"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS serveris"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatçðana %s neizdevâs"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nezinu, kâ formatçt %s, izmantojot tipu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "kïûda nomontçjot %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "vienkârðs"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveris"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nevarat izmantot JFS partîcijâm, kas mazâkas par 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nevarat izmantot ReiserFS pârtîcijâm, kas mazâkas par 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Montçðanas punktiem jâsâkas ar /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jau eksistç partîcija ar montçðanas punktu %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ðim katalogam ir jâpaliek saknes failsistçmâ"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Ðim montçðanas punktam ir nepiecieðama reâla failu sistçma (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Ðim montçðanas punktam ir nepiecieðama reâla failu sistçma (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Nepietiek brîvas vietas, lai izvietotu automâtiski"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Kïûda, atverot %s ierakstîðanai: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Atklâta kïûda - nav atrasta neviena ierîce, kas derçtu jaunu failsistçmu "
-"veidoðanai. Lûdzu pârbaudiet dzelþus, lai noskaidrotu problçmas iemeslu"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Jums nav nevienas partîcijas!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Augstâk ir uzskaitîtas eksistçjoðâs Linux partîcijas, kas ir atrastas uz "
-"jûsu\n"
-"cietâ diska. Jûs varat atstât meistara izdarîto izvçli, jo tâ ir laba\n"
-"parastâm vajadzîbâm. Ja jûs izmainât ðo izvçli, jums ir jâdefinç vismaz\n"
-"saknes partîcijâ(\"/\"). Neizvçlieties pârâk mazu partîciju, citâdi jûs "
-"nevarçsit\n"
-"instalçt visas vajadzîgâs programmas. Ja vçlaties datus glabât atseviðíâ\n"
-"partîcijâ, jums ir jânorâda arî \"/home\" (to var izdarît tikai tad, ja jums "
-"ir\n"
-"vairâkas Linux partîcijas).\n"
-"\n"
-"\n"
-"Jûsu zinâðanai, katra partîcija ir uzskaitîta ðâdâ veidâ: \"Nosaukums\", "
-"\"Izmçrs\".\n"
-"\n"
-"\n"
-"\"Nosaukums\" ir kodçts ðâdi: \"cietâ diska tips\", \"cietâ diska numurs\",\n"
-"\"partîcijas numurs\" (piemçram, \"hda1\").\n"
-"\n"
-"\n"
-"\"Cietâ diska tips\" ir \"hd\", ja jûsu cietais disks ir IDE disks, \"sd\",\n"
-"ja tas ir SCSI cietais disks.\n"
-"\n"
-"\n"
-"\"Cietâ diska numurs\" vienmçr ir burts pçc \"hd\" vai \"sd\". IDE diskiem:\n"
-"\n"
-"   * \"a\" nozîmç \"primârâ IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"b\" nozîmç \"primârâ IDE konytroliera pakârtotais disks\",\n"
-"\n"
-"   * \"c\" nozîmç \"sekundârâ IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"d\" nozîmç \"sekundârâ IDE kontroliera pakârtotais disks\".\n"
-"\n"
-"\n"
-"SCSI diskiem \"a\" nozîmç \"primârais cietais disks\", \"b\" nozîmç\n"
-" \"sekundârais cietais disks\", utt..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Tagad varat norâdît servisus, kurus jûs vçlaties startçt sistçmas\n"
-"palaiðanas laikâ.\n"
-"\n"
-"\n"
-"Kad pele pârvietojas pâr saraksta elementu, parâdâs\n"
-"neliels palîdzîbas balons, kas paskaidro servisa lomu.\n"
-"\n"
-"\n"
-"Esiet îpaði uzmanîgs ðajâ solî, ja vçlaties sistçmu izmantot ka serveri:\n"
-"iespçjams, ka nevçlaties startçt nevienu nevajadzîgu servisu. Atcerieties.\n"
-"ka daþi servisi var bût bîstami, ja darbojas serverî.\n"
-"Parasti izvçlieties tikai tos servisus, kas jums tieðâm nepiecieðami."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Paðlaik jums ir jâizvçlas, kur uz cietâ diska instalçt Mandrake Linux\n"
-"operçtâjsistçmu. Ja disks ir tukðs vai cita operçtâjsistçma aizòem visu\n"
-"vietu uz diska, jums bûs jâveic diska sadalîðana. Îsumâ, cietâ diska\n"
-"sadalîðana nozîmç to sadalît loìiskâs daïâs, lai izveidotu vietu\n"
-"Mandrake Linux sistçmas instalçðanai.\n"
-"\n"
-"\n"
-"Sakarâ ar to, ka diska sadalîðanas process parasti ir neatgriezenisks,\n"
-"nepieredzçjuðam lietotâjam tas var bût nepatîkams un stresa pilns.\n"
-"Ðis meistars vienkârðo procesu. Pirms uzsâkat dalîðanu, izlasiet\n"
-"rokasgrâmatu un visu labi pârdomâjiet.\n"
-"\n"
-"\n"
-"Jums ir nepiecieðamas vismaz divas partîcijas. Viena vajadzîga paðai "
-"sistçmai,\n"
-"otra - virtuâlajai atmiòai (Swap).\n"
-"\n"
-"\n"
-"Ja partîcijas jau izveidotas (agrâkas instalçðanas laikâ vai ar citu diska\n"
-"sadalîðanas rîku), jums tikai jânorâda tâs partîcijas, kurâs vçlaties\n"
-"instalçt Linux sistçmu.\n"
-"\n"
-"\n"
-"Ja partîcijas vçl nav izveidotas, jums tâs ir jâizveido. Lai to izdarîtu,\n"
-"izmantojiet augstâk pieejamo meistaru. Atkarîbâ no jûsu cietâ diska \n"
-"konfigurâcijas ir iespçjami vairâki risinâjumi:\n"
-"\n"
-"* Izmantot esoðu partîciju: meistars uz cietâ diska ir atklâjis vienu vai "
-"vairâkas Linux partîcijas. Ja vçlaties\n"
-" tâs saglabât, izvçlieties ðo opciju. \n"
-"\n"
-"\n"
-"* Izdzçst visu disku: ja vçlaties izdzçst visus uz diska esoðos datus un "
-"partîcijas un aizstât tâs ar jaunu\n"
-"  Mandrake Linux sistçmu, varat izvçlçties ðo opciju. Esiet uzmanîgi, "
-"izvçloties ðo risinâjumu, jo pçc\n"
-"  apstiprinâðanas jûs vairs nevarçsit atteikties no ðîs izvçles.\n"
-"\n"
-"\n"
-"* Izmanto brîvo vietu Windows partîcijâ: ja uz cietâ diska ir instalçts "
-"Microsoft Windows, kas aizòem visu\n"
-"  vietu, jums ir jâatbrîvo vieta Linux datiem. Lai to izdarîtu, jûs varat "
-"nodzçst Microsoft Windows partîciju un\n"
-"  datus (skatît risinâjumus \"Izdzçst visu disku\" vai \"Eksperta reþîms\") "
-"vai izmainît Microsoft\n"
-"  Windows partîcijas izmçru. partîcijas izmçru var izmainît bez datu "
-"zaudçðanas. Ðis risinâjums ir ieteicams, ja\n"
-"  jûs savâ datorâ vçlaties izmantot gan Mandrake Linux, gan Microsoft "
-"Windows.\n"
-"\n"
-"\n"
-"  Pirms izvçlaties ðo risinâjumu, òemiet vçrâ, ka Microsoft Windows "
-"partîcijas izmçrs bûs mazâks, nekâ tas ir\n"
-"  paðlaik. Tas nozîmç, ka jums Microsoft Windows sistçmâ bûs mazâk vietas "
-"datiem vai programmu instalçðanai.\n"
-"\n"
-"\n"
-"* Eksperta reþîms: ja jûs vçlaties patstâvîgi veidot diska partîcijas, varat "
-"izvçlçties ðo variantu. Esiet\n"
-"  uzmanîgi, izveloties ðo risinâjumu. Tas ir ar plaðâm iespçjâm, bet ïoti "
-"bîstams. Jûs varat pazaudçt\n"
-"  visus datus, tâpçc izvçlieties tikai tad, ja zinat, ko darât."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Visas jaunizveidotâs partîcijas ir jâformatç, pirms tâs var izmantot\n"
-"(formatçðana nozîmç failsistçmas izveidoðanu).\n"
-"\n"
-"\n"
-"Tagad jûs arî varat izvçlçties pârformatçt daþas jau esoðas partîcijas, lai\n"
-"izdzçstu tajâs esoðo informâciju. Ja jûs vçlaties to darît, norâdiet\n"
-"partîcijas, kuras vçlaties formatçt.\n"
-"\n"
-"\n"
-"Òemiet vçrâ, ka nav nepiecieðams pârformatçt visas jau eksistçjoðas "
-"partîcijas.\n"
-"Jums ir jâformatç partîcijas, kurâs atrodas operçtâjsistçma (piemçram, \"/"
-"\",\n"
-"\"/usr\" vai \"/var\"), bet nav jâformatç partîcijas, kurâs atrodas dati, "
-"ko\n"
-"jûs vçlaties saglabât (parasti /home).\n"
-"\n"
-"\n"
-"Esiet uzmanîgi, izvçloties partîcijas, jo pçc formatçðanas visi dati bûs\n"
-"iznîcinâti un jûs vairs nevarçsit tos atjaunot.\n"
-"\n"
-"\n"
-"Noklikðíiniet \"Labi\", kad esat gatavi formatçt partîcijas.\n"
-"\n"
-"\n"
-"Noklikðíiniet \"Atcelt\", ja jûs gribat izvçlçties citas partîcijas, kur\n"
-"instalçt jauno Mandrake Linux operçtâjsistçmu."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Jûsu jaunâ Mandrake Linux operçtâjsistçma paðlaik tiek\n"
-"instalçta. Ðî darbîba aizòems daþas minûtes (tas ir atkarîgs no apjoma,\n"
-"ko jûs izvçlçjâties instalçt, un no jûsu datota âtruma.)\n"
-"\n"
-"\n"
-"Lûdzu esiet pacietîgs."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Paðlaik jums ir jâizvçlas, kurâ(s) diska partîcijâ(s) instalçt Mandrake "
-"Linux\n"
-"operçtâjsistçmu. Ja partîcijas jau ir izveidotas (agrâkas GNU/Linux "
-"instalçðanas\n"
-"laikâ vai ar citu diska sadalîðanas rîku), jûs varat izmantot esoðâs "
-"dadaïas.\n"
-"Citos gadîjumos ir jâveido jaunas diska partîcijas.\n"
-"\n"
-"\n"
-"Lai veidotu partîcijas, jums vispirms ir jâizvçlas cietais disks. Jûs varat\n"
-"norâdît sadalâmo disku, noklikðíinot uz \"hda\" pirmajam IDE diskam,\n"
-"\"hdb\" - otrajam diskam, \"sda\" - pirmajam SCSI diskam, utt.\n"
-"\n"
-"\n"
-"Lai sadalîtu izvçlçto cieto disku, varat izmantot sekojoðas opcijas:\n"
-"\n"
-"   * Izdzçst visu: ðî opcija izdzçð visas partîcijas, kas atrodas uz "
-"izvçlçtâ cietâ diska.\n"
-"\n"
-"\n"
-"   * Izvietot automâtiski: ðî opcija ïauj jums automâtiski izveidot Ext2 un "
-"swap partîcijas jûsu cietâ diska\n"
-"     brîvajâ vietâ.\n"
-"\n"
-"\n"
-"   * Salabot partîciju tabulu: ja partîciju tabula ir bojâta, jûs varat "
-"mçìinât to autjaunot, izmantojot ðo opciju.\n"
-"     Esiet uzmanîgi un atcerieties, ka tas var neizdoties.\n"
-"\n"
-"\n"
-"   * Atsaukt: jûs varat izmantot ðo opciju, lai atceltu izmaiòas.\n"
-"\n"
-"\n"
-"   * Pârlâdçt: jûs varat izmantot ðo opciju, ja vçlaties atsaukt visas "
-"izmaiòas un ielâdçt sâkotnçjot partîciju tabulu.\n"
-"\n"
-"\n"
-"   * Meistart: Ja cietâ diska sadalîðanai vçlaties izmantot meistaru, varat "
-"lietot ðo opciju. Tâ ir ieteicama,\n"
-"     ja jums nav labu zinâðanu par diska sadalîðanu.\n"
-"\n"
-"\n"
-"   * Atjaunot no disketes: ja iepriekðçjâs instalçðanas laikâ saglabâjât "
-"partîciju tabulu disketç, jûs varat\n"
-"     to atjaunot, izmantojot ðo opciju.\n"
-"\n"
-"\n"
-"   * Saglabât disketç: ja vçlaties partîciju tabulu saglabât disketç, lai "
-"varçtu to atjaunot, izmantojiet ðo\n"
-"     opciju. Ir ïoti ieteicams izmantot ðo opciju.\n"
-"\n"
-"\n"
-"   * Izdarîts: kad esat pabeiguði cietâ diska dalîðanu, izmantojiet ðo "
-"opciju, lai saglabâtu izmaiòas.\n"
-"\n"
-"\n"
-"Jûsu zinâðanai, jebkuru opciju var izsaukt ar tastatûru: pârvietojieties "
-"starp partîcijâm, izmantojot Tab un Auðup/Lejup bultiòas.\n"
-"\n"
-"\n"
-"Kad ir izvçlçta partîcija, jûs varat izmantot:\n"
-"\n"
-"           * Ctrl-c, lai izveidotu jaunu partîciju (kad ir izvçlçta tukða "
-"partîcija)\n"
-"\n"
-"           * Ctrl-d, lai izdzçstu partîciju\n"
-"\n"
-"           * Ctrl-m, lai uzstâdîtu montçðanas punktu"
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Uz jûsu cietâ diska ir atrasta vairâk nekâ viena Microsoft Windows "
-"partîcija.\n"
-"Lûdzu izvçlieties to partîciju, kuras izmçru jûs vçlaties izmainît, lai\n"
-"instalçtu jauno Mandrake Linux operçtâjsistçmu.\n"
-"\n"
-"\n"
-"Jûsu zinâðanai, katra partîcija ir uzskaitîta ðâdâ veidâ: \"Linux nosaukums"
-"\",\n"
-"\"Windows nosaukums\" \"Izmçrs\".\n"
-"\n"
-"\"Linux nosaukums\" ir kodçts ðâdi: \"cietâ diska tips\", \"cietâ diska\n"
-"numurs\", \"partîcijas numurs\" (piemçram, \"hda1\").\n"
-"\n"
-"\n"
-"\"Cietâ diska tips\" ir \"hd\", ja jûsu cietais disks ir IDE disks, \"sd\",\n"
-"ja tas ir SCSI cietais disks.\n"
-"\n"
-"\n"
-"\"Cietâ diska numurs\" vienmçr ir burts pçc \"hd\" vai \"sd\". IDE diskiem:\n"
-"\n"
-"   * \"a\" nozîmç \"primârâ IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"b\" nozîmç \"primârâ IDE konytroliera pakârtotais disks\",\n"
-"\n"
-"   * \"c\" nozîmç \"sekundârâ IDE kontroliera galvenais disks\",\n"
-"\n"
-"   * \"d\" nozîmç \"sekundârâ IDE kontroliera pakârtotais disks\".\n"
-"\n"
-"\n"
-"SCSI diskiem \"a\" nozîmç \"primârais cietais disks\", \"b\" nozîmç\n"
-" \"sekundârais cietais disks\", utt...\n"
-"\n"
-"\"Windows nosaukums\" ir jûsu cietâ diska burts Windows vidç (pirmais disks\n"
-"vai partîcija saucas \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Lûdzu esat pacietîgs. Ðî darbîba var ilgt vairâkas minûtes."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Lûdzu izvçlieties \"Instalçt\", ja nav instalçta vecâka Linux-Mandrak "
-"versija\n"
-"vai jûs vçlaties izmantot vairâkas operçtâjsistçmas.\n"
-"\n"
-"\n"
-"Lûdzu izvçlieties \"Atjauninât\", ja jûs vçlaties atjauninât jau instalçtu\n"
-"Mandrake Linux versiju.\n"
-"\n"
-"\n"
-"Atkarîbâ no jûsu GNU/Linux zinâðanâm, varat izvçlçties vienu no "
-"sekojoðajiem\n"
-"Mandrake Linux instalçðanas vai atjauninâðanas lîmeòiem:\n"
-"\n"
-"* Ieteicama: ja neesat ne reizi instalçjis GNU/Linux operçtâjsistçmu, "
-"izvçlieties ðo lîmeni. Instalçðana bûs\n"
-"  ïoti vienkârða, un jums tiks uzdoti tikai daþi jautâjumi.\n"
-"\n"
-"\n"
-"* Pielâgota: ja pietiekami labi pârzinat GNU/Linux, varat norâdît sistçmas "
-"pamatpielietojumu (darbastacija, serveris,\n"
-"  izstrâdei). Jums bûs jâatbild uz vairâk jautâjumiem nekâ \"Ieteicamas\" "
-"instalçðanas klases gadîjumâ, tâpçc\n"
-"  jums jâzina, kâ darbojas GNU/Linux, ja gribat izvçlçties ðo klasi.\n"
-"\n"
-"\n"
-"* Eksperta: ja jûs labi zinat GNU/Linux, varat izvçlçties ðo instalçðanas "
-"klasi. Tâpat kâ \"Pielâgotas\" klases\n"
-"  gadîjumâ, jûs varçsit norâdît sistçmas pamatpielietojumu (darbastacija, "
-"serveris, izstrâdei). Esiet ïoti\n"
-"  uzmanîgi, pirms izvçlaties ðo klasi. Jûs varçsit veikt ïoti precîzi "
-"pielâgotu instalçðanu.\n"
-"  Uz daþiem jautâjumiem bûs grûti atbildçt, ja jûsu GNU/Linux zinâðanas nav "
-"pietiekoði labas. Tâpçc neizvçlieties\n"
-"  ðo instalçðanas klasi, ja neesat pârliecinâts."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Lûdzu izvçlieties pareizu portu. Piemçram, MS Windows\n"
-"ports COM1 GNU/Linux vidç saucas ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) un Grub ir sâknçtâji: tie spçj sâknçt GNU/Linux\n"
-"vai jebkuru citu operçtâjsistçmu, kas ir uzstâdîta jûsu datorâ.\n"
-"Parasti citas operçtâjsistçmas tiek korekti noteiktas un instalçtas.\n"
-"Ja tâ nenotiek, jûs ðajâ ekrânâ varat patstâvîgi pievienot ierakstu. Esiet\n"
-"uzmanîgs, izvçloties pareizus parametrus.\n"
-"\n"
-"\n"
-"Jûs varbût arî vçlaties neïaut nevienam piekïût pârçjâm operçtâjsistçmâm,\n"
-"un ðajâ gadîjumâ jûs varat izdzçst attiecîgos ierakstus. Bet ðajâ\n"
-"gadîjumâ jums bûs nepiecieðama sâknçðanas diskete, lai tâs sâknçtu!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Jums ir jânorâda, kur jûs vçlaties novietot\n"
-"GNU/Linux sâknçðanai nepiecieðamo informâciju.\n"
-"\n"
-"\n"
-"Ja vien jûs neesat absolûti pârliecinâts par savu rîcîbu,\n"
-"izvçlieties \"Diska pirmais sektors (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX mçìinâs sameklçt PCI SCSI adapteri(us).\n"
-"Ja DrakX atradîs kâdu SCSI adapteri un zinâs, kuru draiveri izmantot,\n"
-"tas tiks instalçts automâtiski.\n"
-"\n"
-"Ja jums nav SCSI adapteru, ir ISA SCSI adapteris vai PCI SCSI adapteris,\n"
-"ko DrakX neatpazîst, jums tiks pajautâts, vai jûsu sistçmâ ir SCSI\n"
-"adapteris. Ja nav SCSI adapteru, jûs varat vienkârði izvçlçties 'Nç'.\n"
-"Ja jûs izvçlaties 'Jâ', jums tiks parâdîts draiveru saraksts, kurâ\n"
-"varat izvçlçties vajadzîgo adapteri.\n"
-"\n"
-"\n"
-"Ja jums nepiecieðams patstâvîgi norâdît adapteri, DrakX pajautâs, vai\n"
-"vçlaties norâdît adaptera opcijas. Jums bûtu jâïauj DrakX aptaujât\n"
-"dzelþus un noskaidrot opcijas. Parasti tas izdodas bez problçmâm.\n"
-"\n"
-"Ja neizdodas, jums patstâvîgi jânorâda draivera opcijas.\n"
-"Izlasiet Instalçðanas rokasgrâmatu (3. nodaïu, apakðnodaïu \"Informâcijas "
-"savâkðana par jûsu dzelþiem\"), lai uzzinâtu, kâ iegût ðo\n"
-"informâciju no dzelþu dokumentâcijas, raþotâja tîkla lapas\n"
-"(ja jums ir pieejams Internets) vai Windows (ja tas ir uzstâdîts jûsu "
-"datorâ)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Norâdiet cieto disku, ko vçlaties izdzçst, lai izveidotu jaunu\n"
-"Mandrake Linux partîciju. Esiet uzmanîgi, jo visi diskâ esoðie dati\n"
-"pazudîs un nebûs atjaunojami."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Nospiediet \"Labi\", ja vçlaties izdzçst visus datus un\n"
-"partîcijas, kas atrodas uz ðî cietâ diska. Esiet uzmanîgi, pçc \"Labi\" "
-"nospieðanas jûs nevarçsit atjaunot nekâdus datus vai partîcijas, kas "
-"atradâs\n"
-"uz diska, tajâ skaitâ arî Windows datus.\n"
-"\n"
-"\n"
-"Nospiediet \"Atcelt\", lai atceltu ðo operâciju bez jebkâdu uz ðî diska "
-"esoðu datu vai partîciju pazaudçðanas."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ielieciet FAT formatçtu disketi iekârtâ %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Lai izmantotu ðo saglabâto pakotòu izvçli, palaidiet instalâciju ar ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Kïûda, nolasot failu %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Daþu jûsu datora dzelþu darbîbai nepiecieðami ``firmas'' draiveri.\n"
-"Papildus informâciju varat atrast ðeit: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Jums ir nepiecieðama saknes partîcija.\n"
-"Ðim nolûkam izveidojiet partîciju (vai uzklikðíiniet uz jau esoðas).\n"
-"Tad izvçlieties darbîbu ``Montçðanas punkts'' un norâdiet, ka tas ir `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Jums ir nepiecieðama swap partîcija"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Jums nav swap partîcijas\n"
-"\n"
-"Vai tomçr turpinât?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Jums ir nepiecieðama swap partîcija"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Izmantot brîvo vietu"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nepietiek brîvas vietas, lai izvietotu jaunas partîcijas"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Izmantot jau esoðu partîciju"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nav nevienas partîcijas, ko varçtu izmantot"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Izmantot Windows partîciju priekð loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kuru partîciju vçlaties izmantot priekð Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izvçlieties izmçrus"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Saknes partîcijas izmçrs (MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap partîcijas izmçrs (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Izmantot Windows partîcijas brîvo vietu"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kuras partîcijas izmçru vçlaties izmainît?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Izskaitïoju Windows failu sistçmas robeþas"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT izmçra mainîtâjs nespçj izmainît jûsu partîciju,\n"
-"atklâta sekojoða kïûda: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Windows partîcija ir pârâk fragmentçta, vispirms palaidiet ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"BRÎDINÂJUMS!\n"
-"\n"
-"Tagad DrakX izmainîs Windows partîcijas izmçru. Esiet uzmanîgs: ðî darbîba\n"
-"ir bîstama. Ja jûs to vçl neesat izdarîjis, jums vispirms ir jâpârtrauc\n"
-"instalçðana, no Windows jâpalaiþ scandisk (ieteicams palaist arî defrag),\n"
-"tad atkârtoti jâsâk instalçðana. Vajadzçtu izveidot arî datu rezerves\n"
-"kopiju. Kad esat pârliecinâts, nospiediet Labi."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kâdu apjomu vçlaties atstât priekð windows uz"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partîcija %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT izmçra maiòa neizdevâs: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nav FAT partîciju, lai izmainîto to izmçru vai izmantotu kâ loopback (vai "
-"nepietiek brîvas vietas)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Izdzçst visu disku"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Noòemt Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Jums ir vairâk nekâ viens cietais disks, uz kura jûs instalçjat linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VISAS diska %s partîcijas un tajâs esoðie dati tiks pazaudçti"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Pielâgots disku sadalîjums"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Izmantot fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Tagad jûs varat sadalît diska iekârtu %s.\n"
-"Kad esat pabeiguði, neaizmirstiet saglabât, izmantojot `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Jûsu Windows partîcijâ nav pietiekoði daudz brîvas vietas"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nevaru atrast vietu instalçðanai"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partîciju veidoðanas meistars atrada sekojoðus risinâjumus:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Diska sadalîðana neizdevâs: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Iedarbinu tîklu"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Atslçdzu tîklu"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Atklâta kïûda, bet es nezinu, kâ ar to pareizi apieties.\n"
-"Turpiniet, ja vçlaties riskçt."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dublçts montçðanas punkts %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Daþas svarîgas pakotnes neizdevâs pareizi instalçt.\n"
-"Ir bojâta jûsu kompaktdisku iekârta vai instalâcijas disks.\n"
-"Parbaudiet disku uz instalçta datora, izmantojot komandu \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Jûs sveic %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nav nevienas diskeðu iekârtas"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Uzsâku soli `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Jûsu sistçmai trûkst resursu. Mandrake Linux instalçðanas laikâ var\n"
-"rasties problçmas. Ja tâ notiek, varat pamçìinât teksta instalçðanu.\n"
-"Lai to izdarîtu, nospiediet`F1', ka notiek ielâde no CDROM, tad ievadiet\n"
-"`text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalçðanas klase"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Lûdzu izvçlieties vienu no sekojoðâm instalçðanas klasçm:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Kopçjais jûsu izvçlçto grupu izmçrs ir aptuveni %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ja jûs vçlaties instalçt mazâk nekâ ðo izmçru,\n"
-"procentuâli izvçlieties instalçjamo pakotòu daudzumu.\n"
-"\n"
-"Zems procentu lîmenis instalçs tikai vissvarîgâkâs pakotnes;\n"
-"100% lîmenî tiks instalçtas visas izvçlçtâs pakotnes."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Jums uz diska ir vieta tikai %d%% no ðîm pakotnçm.\n"
-"\n"
-"Ja vçlaties instalçt mazâk, procentuâli izvçlieties instalçjamo pakotòu\n"
-"daudzumu. Zems procentu lîmenis instalçs tikai vissvarîgâkâs pakotnes;\n"
-"%d%% lîmenis instalçs tik daudz pakotòu, cik ir iespçjams."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Nâkamajâ solî jûs varçsit izvçlçties daudz precîzâk."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Instalçjamo pakotòu procentuâlais daudzums"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakotòu grupu izvçle"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Atseviðíu pakotòu izvçle"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Kopçjais izmçrs: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Slikta pakotne"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nosaukums: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Apjoms: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Svarîgums: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Jûs nevarat izvçlçties ðo pakotni, jo nepietiek vietas tâs instalçðanai"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Tiks instalçtas sekojoðas pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Tiks noòemtas sekojoðas pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Jûs varat izvçlçties/atteikties no ðîs pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ðî ir obligâta pakotne, no tâs nevar atteikties"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Jûs nevarat atteikties no ðîs pakotnes. Tâ jau ir instalçta"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ðo pakotni ir nepiecieðams uzlabot\n"
-"Vai tieðâm vçlaties atteikties no tâs?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Jûs nevarat atteikties no ðîs pakotnes. To ir nepiecieðams uzlabot"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalçt"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Saglabât disketç"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Saglabât pakotòu izvçli"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Instalçðanas beigas"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalçju"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Aprçíinu"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Atlikuðais laiks"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Lûdzu gaidiet, gatavoju instalâciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakotnes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalçju pakotni %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Pieòemt"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Noraidît"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Nomainiet Cd-Rom!\n"
-"\n"
-"Lûdzu ielieciet iekârtâ Cd-Rom \"%s\", kad tas ir izdarîts, nospiediet Labi\n"
-"Ja jums nav ðî diska, nospiediet Atcelt, lai neinstalçtu no ðî Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Tomçr turpinât?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Pakotòu kârtoðanas laikâ atklâta kïûda:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Pakotòu instalçðanas laikâ atklâta kïûda:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Brîdinâjums\n"
-"\n"
-"Lûdzu rûpîgi izlasiet zemâk esoðos nosacîjumus. Ja jûs nepiekrîtat kâdai\n"
-"to daïai, jûs nedrîkstat instalçt no ðî CD. Nospiediet 'Noraidît', lai\n"
-"turpinâtu instalçðanu, neizmantojot ðo datu nesçju.\n"
-"\n"
-"\n"
-"Daþi ðajâ CD datu nesçjâ esoðie komponenti nav pakïauti GPL licencei vai\n"
-"lîdzîgiem lîgumiem. Katra ðâda komponenta izmantoðanu nosaka atseviðías\n"
-"licences noteikumi un nosacîjumi. Lûdzu rûpîgi to izlasiet un ievçrojiet\n"
-"tâs nosacîjumus, pirms izmantot vai izplatît uzskaitîtos komponentus.\n"
-"Ðîs licences pârsvarâ aizliegs jums pârsûtît, dublçt (izòemot rezerves\n"
-"kopçðanas nolûkus), izplatît tâlâk, reversi uzbûvçt, de-asamblçt,\n"
-"de-kompilçt vai modificçt ðo kompomentu. Jebkurð ðîs vienoðanâs pârkâpums\n"
-"jums automâtiski atòems tiesîbas, ko pieðíîrusi attiecîgâ licence. Izòemot\n"
-"gadîjumus, kad konkrçtas lcences nosacîjumi jums dod ðâdas tiesîbas, jûs\n"
-"parasti nedrîkstat instalçt ðâdu programmu uz vairâk nekâ vienas sistçmas\n"
-"vai pielâgot to izmantoðanai tîklâ. Ja ðaubâties, lûdzu sazinieties ar\n"
-"komponenta izplatîtâju vai redaktoru.\n"
-"Ðâdu komponentu, tajâ skaitâ arî iekïautâs dokumentâcijas, nodoðana\n"
-"treðajâm personâm vai kopçðana parasti ir aizliegta.\n"
-"\n"
-"\n"
-"Visas nâkamajâ CD datu nesçjâ iekïauto komponentu tiesîbas pieder to\n"
-"attiecîgajiem autoriem, un tâs aizsargâ intelektuâlâ îpaðuma un\n"
-"autortiesîbu likumi, kas attiecas uz programnodroðinâjumu.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Atklâta kïûda"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Vai vçlaties pârstartçt tîklu"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licences lîgums"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatûra"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Lûdzu izvçlieties jûsu tastatûras izkârtojumu."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ðeit ir pilns pieejamo tastatûru saraksts"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kuru instalçðanas klasi vçlaties?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalçt/Atjauninât"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ðî ir instalçðana vai atjauninâðana?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Ieteicama"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Eksperta"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Atjauninât"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Saglabât pakotòu izvçli"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Lûdzu izvçlieties jûsu peles tipu."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Peles ports"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Lûdzu izvçlieties, kuram seriâlajam portam ir pieslçgta pele."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurçju PCMCIA kartes..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurçju IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nav pieejamu partîciju"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Pârmeklçju partîcijas, lai atrastu montçðanas punktus"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Izvçlieties montçðanas punktus"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Neizdevâs nolasît diska partîciju tabulu, jo tâ bija pârâk stipri bojâta :(\n"
-"Sistçma var mçìinât atslçgts sliktâs partîcijas (VISI DATI pazudîs!).\n"
-"Otrs risinâjums ir aizliegt DrakX izmainît partîciju tabulu.\n"
-"(kïûda ir %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake neizdevâs pareizi nolasît partîciju tabulu.\n"
-"Turpiniet, ja vçlaties riskçt!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Izvçlieties partîcijas, ko vçlaties formatçt"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Saknes partîcija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kura ir jûsu sistçmas saknes partîcija (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Lai partîciju tabulas izmaiòas stâtos spçkâ, jums jâpârstartç dators"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izvçlieties partîcijas, ko vçlaties formatçt"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Pârbaudît sliktos blokus?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatçju partîcijas"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Veidoju un formatçju failu %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Instalçðanas pabeigðanai nepietiek swap, palieliniet swap"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Meklçju pieejamâs pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Meklçju uzlabojamâs pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Jûsu sistçmâ vairs nav brîvas vietas instalçðanai vai uzlaboðanai (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pilna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimâla (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ieteicama (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Atjanot no disketes"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Atjanot no disketes"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Pakotòu grupu izvçle"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Ielieciet disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Saglabât disketç"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ja jums ir visi ðajâ sarakstâ norâdîtie CD, nospiediet Labi.\n"
-"Ja jums nav neviena no norâdîtajiem CD, nospiediet Atcelt.\n"
-"Ja trûkst tikai daþu CD, sarakstâ atslçdziet tos un nospiediet Labi."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ar nosaukumu \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Sagatavoju instalçðanu"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalçju pakotni %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Pçcinstalçðanas konfigurçðana"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ielieciet disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ielieciet tukðu disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tagad jums ir iespçja ielâdçt ðifrçðanai nepiecieðamâs programmas.\n"
-"\n"
-"BRÎDINÂJUMS:\n"
-"\n"
-"Sakarâ ar to, ka uz ðo programmu izmantoðanu attiecas daþâdas vispârçjas\n"
-"prasîbas un daþâda likumdoðana, ðo programmu saòçmçjam un/vai gala\n"
-"lietotâjam ir jâpârliecinâs, ka viòa likumdoðana ïauj viòam ielâdçt,\n"
-"glabât un/vai izmantot ðîs programmas.\n"
-"\n"
-"Bez tam saòçmçjam un/vai gala lietotâjam ir jâbût îpaði uzmanîgam, lai\n"
-"nepârkâptu ðo likumdoðanu. Ja saòçmçjs un/vai gala lietotâjs neievçros\n"
-"atbilstoðos likumus, pret viòu tiks pielietotas nopietnas sankcijas.\n"
-"\n"
-"Mandrakesoft vai tâ raþotâji un/vai piegâdâtâji nekâdâ gadîjumâ nebûs\n"
-"atbildîgi par tieðiem, netieðiem vai nejauðiem bojâjumiem (ieskaitot, bet\n"
-"neaprobeþojoties ar ienâkumu zaudçðanu, komercdarbîbas apturçðanu,\n"
-"komerciâlu datu zaudçðanu un citiem finansiâliem zaudçjumiem, un iespçjamu\n"
-"atbildîbu un atlîdzinâjumu, kas bûtu jâmaksâ saskaòâ ar tiesas spriedumu),\n"
-"kas varçtu rasties sakarâ ar programmu lietoðanu, glabâðanu vai vienkârðu\n"
-"ielâdçðanu, kurâm saòçmçjs un/vai gala lietotâjs bûs spçjîgs piekïût\n"
-"pçc ðîs vienoðanâs apstiprinâðanas.\n"
-"\n"
-"\n"
-"Ja jums ir jebkâdi jautâjumi sakarâ ar ðo vienoðanos, lûdzu sazinieties ar\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Pieslçdzos spoguïserverim, lai saòemtu pieejamo pakotòu sarakstu"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izvçlieties spoguïserveri, no kura òemt pakotnes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Pieslçdzos spoguïserverim, lai saòemtu pieejamo pakotòu sarakstu"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Kâda ir jûsu laika josla?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Vai datora pulkstenis râda GMT laiku?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Attâls CUPS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nav printera"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Vai ir vçl kâds?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Kopsavilkums"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Pele"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Laika josla"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printeris"
-
-#: ../../install_steps_interactive.pm_.c:1049
-#, fuzzy
-msgid "ISDN card"
-msgstr "Iekðçja ISDN karte"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-#, fuzzy
-msgid "Sound card"
-msgstr "Standarta"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Izmantot NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Lokâls printeris"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "root paroles izvçle"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez paroles"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ðî parole ir pârâk vienkârða (jâbût vismaz %d simbolus garai)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikâcija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentifikâcija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "serveris"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentifikâcijas NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domçns"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS serveris"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Pielâgotâ sâknçðanas diskete piedâvâ veidu, kâ sâknçt jûsu Linux sistçmu\n"
-"neatkarîgi no parastâ sâknçtâja. Tas ir noderîgi, ja jûs nevçlaties savâ\n"
-"sistçmâ uzstâdît SILO, vai kâda cita operçtâjsistçma izdzçð SILO,\n"
-"vai arî SILO nedarbojas ar jûsu dzelþu konfigurâciju. Pielâgoto\n"
-"sâknçðanas disketi var izmantot arî kopâ ar Mandrake glâbðanas attçlu,\n"
-"atvieglojot atjaunoðanu pçc smagiem sistçmas bojâjumiem.\n"
-"\n"
-"Ja vçlaties izveidot jûsu sistçmai pielâgotu sâknçðanas disketi,\n"
-"ielieciet sisketi pirmajâ iekârtâ un nospiediet \"Labi\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Pirmâ diskeðu iekârta"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Otrâ diskeðu iekârta"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Izlaist"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Pielâgotâ sâknçðanas diskete piedâvâ veidu, kâ sâknçt jûsu Linux sistçmu\n"
-"neatkarîgi no parastâ sâknçtâja. Tas ir noderîgi, ja jûs nevçlaties savâ\n"
-"sistçmâ uzstâdît LILO (vai grub), vai kâda cita operçtâjsistçma izdzçð\n"
-"LILO, vai arî LILO nedarbojas ar jûsu dzelþu konfigurâciju. Pielâgoto\n"
-"sâknçðanas disketi var izmantot arî kopâ ar Mandrake glabðanas attçlu,\n"
-"atvieglojot atjaunoðanu pçc smagiem sistçmas bojâjumiem. Vai vçlaties\n"
-"izveidot jûsu sistçmai pielâgotu sâknçðanas disketi?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Diemþçl nav pieejama neviena diskeðu iekârta"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Norâdiet diskeðu iekârtu, ko izmanto distetes veidoðanai"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ielieciet disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Gatavoju sâknçðanas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Sagatavoju sâknçtâju"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Vai vçlaties izmantot aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Kïûda, instalçjot aboot, \n"
-"vai instalçt piespiedu kârtâ pat tad, ja tiks iznîcinâta pirmâ partîcija?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Sâknçtâja instalçðana"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Sâknçtâja instalçðana neizdevâs. Atklâta ðâda kïûda:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ielieciet tukðu disketi iekârtâ %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Sagatavoju auto instalçðanas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Daþi soïi nav izpildîti.\n"
-"\n"
-"Vai tieðâm vçlaties iziet tûlît?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Apsveicam, instalçðana ir pabeigta.\n"
-"Izòemiet sâknçðanas datu nesçju un nospiediet ievadu, lai pârstartçtu "
-"datoru.\n"
-"\n"
-"\n"
-"Lai saòemtu informâciju par labojumiem, kas ir pieejami ðim Mandrake Linux\n"
-"izdevumam, skatiet Errata failu, kas atrodams\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informâcija par jûsu sistçmas konfigurçðanu ir pieejama Oficiâlâs\n"
-"Mandrake Linux rokasgrâmatas pçcinstalçðanas nodaïâ."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Sagatavot auto instalçðanas disketi"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automâtisks"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Atkârtot"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Saglabât pakotòu izvçli"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalçðana %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"   <Tab>/<Alt-Tab> pâriet | <Space> izvçlçties | <F12> uz nâkamo ekrânu"
-
-#: ../../interactive.pm_.c:87
-#, fuzzy
-msgid "kdesu missing"
-msgstr "atmest"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Izvçlieties darbîbu"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Izvçrsta"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Lûdzu uzgaidiet"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Izvçrst koku"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sakïaut koku"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Sakârtots vienâ sarakstâ vai pa grupâm"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Slikta izvçle, pamçìiniet vçlreiz\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Jûsu izvçle? (noklusçti %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Jûsu izvçle? (noklusçti %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcijas: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Vai vçlaties izmantot aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Jûsu izvçle? (noklusçti %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Èehijas (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Vâcijas"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvoraka"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spânijas"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Somijas"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francijas"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvçìijas"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polijas"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Krievijas"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Zviedrijas"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Apvienotâs Karalistes"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "ASV tastatûra"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Irânas"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armçnijas (vecâ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armçnijas (rakstâmmaðîna)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armçnijas (fonçtiskâ)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidþânas (latîòu)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Beïìijas"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armçnijas (fonçtiskâ)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgârijas"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazîlijas (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Baltkrievijas"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Ðveices (vâcu izvietojums)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Ðveices (franèu izvietojums)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Èehijas (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Vâcijas (bez mçmajiem taustiòiem)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dânijas"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoraka (Norvçìijas)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Igaunijas"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijas (\"krievu\" izvietojums)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijas (\"latîòu\" izvietojums)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grieíijas"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungârijas"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Horvâtijas"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraçlas"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraçlas (fonçtiskâ)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Irânas"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandes"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itâlijas"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japânas 106 taistiòi"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Apvienotâs Karalistes"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latîòamerikas"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lietuvas AZERTY (vecâ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lietuvas AZERTY (jaunâ)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lietuvas \"numuru rinda\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lietuvas \"fonçtiskâ\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Atraðanâs vieta"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Maíedonijas"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Dânijas"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polijas (qwerty izvietojums)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polijas (qwertz izvietojums)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugâles"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanâdas (Kvebeka)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Krievijas (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovçnijas"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovâkijas (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovâkijas (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidþânas (kirilica)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabula"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tai tastatûra"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tai tastatûra"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turcijas (tradicionâlais \"F\" modelis)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turcijas (modernais \"Q\" modelis)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainas"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "ASV tastatûra (starptautiskâ)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamas \"numuru rinda\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Dienvidslâvijas (latîòu/kirilicas)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cikliski montçðanas punkti %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - pele"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Parasta PS2 Wheel pele"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-#, fuzzy
-msgid "1 button"
-msgstr "2 pogas"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Parasta 2 pogu pele"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Vispârçja"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ritenis"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriâla"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Parasta 3 pogu pele"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (seriâla, vecs C7 tips)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 pogas"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 pogas"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "neviens"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nav peles"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Lûdzu notestçjiet peli"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Lai aktivizçtu peli,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "PAKUSTINIET RITENI!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "Somijas"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Tâlâk ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Atpakaï"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Vai tas ir pareizi?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Pieslçgties Internetam"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Parastâkais veids, kâ pieslçgties ar adsl, ir pppoe.\n"
-"Daþi pieslçgumi izmanto pptp, pavisam nedaudzi dhcp.\n"
-"Ja jûs nezinat, izvçlieties 'izmantot pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "izmantot dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "izmantot pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "izmantot pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kuru dhcp klientu vçlaties izmantot?\n"
-"Noklusçti ir dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Jûsu sistçmâ nav atrasts neviens ethernet tîkla adapteris.\n"
-"Nevaru uzstâdît ðo pieslçguma veidu."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Izvçlieties tîkla interfeisu"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Lûdzu norâdiet, kuru tîkla adapteri vçlaties izmantot Interneta pieslçgumam."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "tîkla karte nav atrasta"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurçju tîklu"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Lûdzu ievadiet jûsu resursa vârdu, ja to zinat.\n"
-"Daþu DHCP serveru darbîbai ir nepiecieðams resursa vârds.\n"
-"Resursa vârdam ir jâbût pilnam kvalificçtam resursa vârdam,\n"
-"piemçram, ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Resursa vârds:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Tîkla konfigurçðanas meistars"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Ârçjs ISDN modçms"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Iekðçja ISDN karte"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kâds ir jûsu ISDN pieslçguma veids?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfigurâcija"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izvçlieties pakalpojumu sniedzçju.\n"
-" Ja tas nav ðajâ sarakstâ, izvçlietis Nav sarakstâ"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokols"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eiropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Citur pasaulç"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Citur pasaulç \n"
-" nav D-Channel (izdalîtas lînijas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Kâdu protokolu vçlaties izmantot?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kâds ir jûsu kartes tips?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nezinu"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ja jums ir ISA karte, vçrtîbâm nâkamajâ ekrânâ jâbût pareizâm.\n"
-"\n"
-"Ja jums ir PCMCIA karte, jums ir jâzina kartes irq un io.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Pârtraukt"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Turpinât"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kura ir jûsu ISDN karte ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ir atklâta ISDN PCI karte, bet nav zinâms kartes tips. Lûdzu izvçlieties "
-"kâdu no nâkamajâ ekrânâ uzskaitîtajâm PCI kartçm."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nav atrasta neviena ISDN PCI karte. Lûdzu izvçlieties kâdu no saraksta."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Lûdzu norâdiet, kuram seriâlajam portam ir pieslçgts modçms."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Iezvanpieejas opcijas"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Savienojuma nosaukums"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefona numurs"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Lietotâja ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Ar skriptu"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Izmantojot terminâli"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domçna nosaukums"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Pirmais DNS serveris"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Otrais DNS serveris"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Varat atslçgties vai pârkonfigurçt pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Varat pârkonfigurçt pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Paðlaik jûs esat pieslçdzies Internetam."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Varat pieslçgties Internetam vai pârkonfigurçts pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Paðlaik jûs neesat pieslçdzies Internetam."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Nav pieslçgts"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "ISDN pieslçgums"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Tîkla konfigurçðana"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interneta pieslçgums un konfigurâcija"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Varat atslçgties vai pârkonfigurçt pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Varat atslçgties vai pârkonfigurçt pieslçgumu."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Tîkla konfigurâcija"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izvçlieties konfigurçjamo profilu"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Noskaidroju ierîces..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Parasts modçma pieslçgums"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "atklâts uz porta %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN pieslçgums"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "atklâts %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN pieslçgums"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "atklâts uz interfeisa %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabeïa pieslçgums"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabeïa pieslçgums"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN pieslçgums"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet karte(s) atrasta"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Izvçlieties izmantojamo rîku"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Interneta pieslçguma koplietoðana"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Vai vçlaties startçt pieslçgumu palaiðanas laikâ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Tîkla konfigurâcija"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Vai vçlaties pârstartçt tîklu"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"BRÎDINÂJUMS: Ðî ierîce jau agrâk ir konfigurçta, lai pieslçgtos Internetam.\n"
-"Vienkârði apstipriniet, ka vçlaties saglabât ðo konfigurâciju.\n"
-"Tâlâko lauku izmainîðana pârrakstîs ðo konfigurâciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Lûdzu ievadiet ðî datora IP konfigurâciju.\n"
-"Visi dati jâievada kâ IP adreses ar punktiem atdalîtu decimâlu\n"
-"skaitïu veidâ (piemçram, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurçju tîkla iekârtu %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (draiveris %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adrese"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Tîkla maska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automâtisks IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adreses formâtam jâbût 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Lûdzu ievadiet resursa vârdu.\n"
-"Resursa vârdam ir jâbût pilnam kvalificçtam resursa vârdam,\n"
-"piemçram, ``mybox.mylab.myco.com''.\n"
-"Jûs varat ievadît arî vârtejas IP adresi, ja tâda ir"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS serveris"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Vârtejas ierîce"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy serveru konfigurâcija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy bûtu jâbût http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy bûtu jâbût ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vai vçlaties mçìinât pieslçgties internetam tûlît?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Izmçìinu pieslçgumu..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistçma paðlaik ir pieslçgta Internetam."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Ðíiet, ja jûsu sistçmu nav pieslçgta Internetam.\n"
-"Mçìiniet pârkonfigurçt pieslçgumu."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Savienojuma konfigurçðana"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Lûdzu aizpieldiet vai izvçlietis lauku"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kartes IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kartes mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kartes IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kartes IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kartes IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Jûsu privâtais telefona numurs"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Pakalpojumu sniedzçja nosaukums (piem., provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Pakalpojumu sniedzçja telefona numurs"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provaidera dns 1 (nav obligâti)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provaidera dns 2 (nav obligâti)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Tastatûras izvçle"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Zvanîðanas reþîms"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Savienojuma tips: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Savienojuma tips: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konta nosaukums (lietotâja vârds)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Konta parole"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montçðana neizdevâs: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ðai platformai paplaðinâtâ partîcija nav pieejama"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Jûsu diska partîciju tabulâ ir caurums, bet es to nevaru izmantot.\n"
-"Vienîgais risinâjums ir pârvietot primâras partîcijas tâ, lai caurums "
-"atrastos blakus paplaðinâtajâm partîcijâm"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Atjaunoðana no faila %s neizdevâs: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Kïûda, ierakstot failâ %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "nepiecieðama"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "svarîga"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ïoti derîga"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "derîga"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "varbût"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokâls printeris"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Attâls printeris"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Attâls CUPS serveris"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Attâls lpd serveris"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Tîkla printeris (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printera serveris"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printera ierîces URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Lokâls printeris"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Attâls printeris"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Kïûda, ierakstot failâ %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulis %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS servera IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Noklusçts)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izvçlieties printera pieslçgumu"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kâ ðis printeris ir pieslçgts?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Izmantojot attâlu CUPS serveri, ðeit jums nav nepiecieðams\n"
-"konfigurçt printeri; printeri tiks atrasti automâtiski.\n"
-"Ja jûs ðaubaties, izvçlieties \"Attâls CUPS serveris\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Attâls CUPS serveris"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adreses formâtam jâbût 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Porta numuram ir jâbût skaitlim"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS servera IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ports"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Sâknçðanas stila konfigurçðana"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Noskaidroju ierîces..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Pârbaudît portus"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Lokâls printeris"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "atklâts %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Printera ierîces URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Lokâls printeris"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Lûdzu norâdiet, kuram seriâlajam portam ir pieslçgts modçms."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Printera ierîces URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Konfigurâcija"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalçju pakotni %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalçju pakotni %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Attâla lpd printera opcijas"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Lai izmantotu attâlu lpd drukas rindu, jums jânorâda\n"
-"printera servera resursa vârds un tâs servera rindas\n"
-"nosaukums, kurai jâadresç drukas uzdevumi."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Attâlâ resursa vârds"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Attâlâ resursa vârds"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Attâlâ resursa vârds"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printera opcijas"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Lai drukâtu ar SMB printeri, jums jânorâda SMB resursa vârds\n"
-"(Piezîme! Tas var atðíirties no datora TCP/IP vârda!)\n"
-"un, iespçjams, ðî servera IP adrese, kâ arî jûs interesçjoðâ printera\n"
-"koplietojuma vârds un atbilstoðs lietotâja vârds, parole un\n"
-"darba grupas informâcija."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB servera resurss"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB servera IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Koplietojuma vârds"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Darba grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare printera opcijas"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Lai drukâtu ar NetWare printeri, jums jânorâda NetWare\n"
-"printera servera vârds (Piezîme! tas var atðíirties no servera\n"
-"TCP/IP resursa vârda!), kâ arî jûsu izvçlçtâ printera rindas\n"
-"nosaukums un jebkurð atbilstoðs lietotâja vârds un parole."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printera serveris"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Printera rindas nosaukums"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Socket printera opcijas"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Lai drukâtu ar socket printeri, jums ir jânorâda printera\n"
-"resursa vârds tîklâ un papildus arî porta numurs."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printera resursa vârds"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printera resursa vârds"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printera ierîces URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Printera nosaukums"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Apraksts"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Atraðanâs vieta"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Vai tas ir pareizi?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printera pieslçgums"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kâds ir jûsu printera tips?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Vai vçlaties izmçìinât printeri?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Pârbaudît portus"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Jâ, izdrukât abas izmçìinâjuma lapas"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printeris"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standarta"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Izmçìinâjuma lapa(s) ir nosûtîta(s) printera demonam.\n"
-"It may take some time before the printer starts.\n"
-"Var paiet zinâms laiks, pirms printeris sâk drukât.\n"
-"Izdrukas stâvoklis:\n"
-"%s\n"
-"\n"
-"Vai tas darbojas pareizi?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Izmçìinâjuma lapa(s) ir nosûtîta(s) printera demonam.\n"
-"Var paiet zinâms laiks, pirms printeris sâk drukât.\n"
-"Vai tas darbojas pareizi?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Pele"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Atslçdzu tîklu"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Atslçdzu tîklu"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Printera opcijas"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Nav printera"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfigurâcija"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Izmçìinu pieslçgumu..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Tîkla konfigurçðana"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitors nav konfigurçts"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfigurçju tîklu"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kuru drukâðanas sistçmu vçlaties izmantot?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Augsts"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoisks"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kuru drukâðanas sistçmu vçlaties izmantot?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Izvçlieties printera pieslçgumu"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kuru drukâðanas sistçmu vçlaties izmantot?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurçt printeri"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalçju pakotni %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printera opcijas"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfigurçt printeri"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Vai vçlaties konfigurçt printeri?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Printeris"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Eksistç sekojoðas drukas rindas.\n"
-"Jûs varat pievienot jaunass vai izmainît esoðâs."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Eksistç sekojoðas drukas rindas.\n"
-"Jûs varat pievienot jaunass vai izmainît esoðâs."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Tîkla konfigurçðana"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Interneta pieslçguma koplietoðana"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printera pieslçgums"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Tiek drukâta(s) izmçìinâjuma lapa(s)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Attâls printeris"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Lokâls printeris"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Vai vçlaties pârstartçt tîklu"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Nolasu CUPS draiveru datubâzi..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Proxy serveru konfigurâcija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Ports"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy bûtu jâbût http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Porta numuram ir jâbût skaitlim"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy bûtu jâbût ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Autoreìistrçðanâs"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parole"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Bez paroles"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Paroles nesakrît"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nevar pievienot partîciju _formatçtam_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Neizdodas ierakstît failu %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neizdevâs"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neizdevâs (varbût nav uzstâdîti raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nepietiek diska partîciju RAID lîmenim %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ir periodisku komandu plânotâjs."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd paredzçts baterijas stâvokïa novçroðanai un grâmatoðanai ar syslog.\n"
-"To var izmantot arî datora izslçgðanai, kad baterija ir izlâdçta."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Palaiþ komandas, kas ir ieplânotas noteiktâ laikâ, izmantojot at komandu,\n"
-"kâ arî palaiþ komadu paketes, kad vidçjâ sistçmas noslodze ir pietiekoði\n"
-"zema."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ir parasta UNIX programma, kas palaiþ lietotâju norâdîtâs programmas\n"
-"periodiski ieplânotos laikos. vixie cron piedâvâ virkni papildus\n"
-"iespçju salîdzinot ar UNIX cron, tajâ skaitâ arî labâku droðîbu un daudz\n"
-"izvçrtstâkas konfigurçðanas iespçjas."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM nodroðina peles atbalstu daþâdâm teksta reþîma Linux programmâm,\n"
-"piemçram, Midnight Commander. Tas arî ïauj no konsoles ar peli veikt\n"
-"izgriezt-un-iespraust operâcijas, kâ arî piedâvâ izlecoðo izvçlòu\n"
-"atbalstu konsolei."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ir Vispasaules tîmekïa (WWW) serveris. Tas tiek izmantots HTML\n"
-"failu un CGI izplatîðanai."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneta superservera demons (parasti saukts par inetd) pçc vajadzîbas\n"
-"startç daþâdus interneta servisus. Tas it atbildîgs par daudzu servisu\n"
-"startçðanu, tajâ skaitâ telnet, ftp, rsh un rlogin. inetd atslçgðana\n"
-"atslçdz arî visus servisus, par kuriem tas atbild."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ðî pakotne ielâdç izvçlçto tastatûras karti, kas norâdîta failâ\n"
-"/etc/sysconfig/keyboard. To var izvçlçties, izmantojot programmu kbdconfig.\n"
-"Vairumâ gadîjumu ðo pakotni ir jâatstâj izvçlçtu."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ir drukas demons, kas ir nepiecieðams lpr pareizai darbîbai. Tas ir\n"
-"serveris, kas nosûta drukas uzdevumus printeri(e)m."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) ir domçnu vârdu serveris (DNS), kas tiek izmantots resursu\n"
-"vârdiem atbilstoðo IP adreðu noskaidroðanai."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mounts un unmounts ir Tîkla Failu sistçmas (NFS), SMB (Lan\n"
-"Manager/Windows) un NCP (NetWare) montçðanas punkti."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivizç/Deaktivizç visus tîkla interfeisus, kas ir konfigurçti\n"
-"startçðanai sistçmas sâknçðanas laikâ."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ir populârs protokols failu koplietoðanai TCP/IP tîklos.\n"
-"Ðis serviss nodroðina NFS servera funkcionalitâti, un to var konfigurçt\n"
-"ar faila /etc/exports palîdzîbu."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ir populârs protokols failu koplietoðanai TCP/IP tîklos.\n"
-"Ðis serviss nodroðina NFS failu aizslçgðanas funkcionalitâti."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA atbalsts parasti ir paredzçts, piemçram, tîkla karðu un modçmu\n"
-"uzturçðanai pârnçsâjamos datoros. Tas netiks startçts, ja nav konfigurçts,\n"
-"tâpçc ir droði to instalçt datoros, kam tas nav nepiecieðams."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper apkalpo RPC pieslçgumus, ko izmanto citi protokoli,\n"
-"piemçram, NFS un NIS. portmap serveri ir jâizmanto datoros, kas\n"
-"darbojas kâ RPC protokolus izmantojoðu protokolu serveri."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ir Pasta Transporta Aìents, un tâ ir programma, kas pârvieto\n"
-"pastu no viena datora uz citu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Saglabâ un atjauno sistçmas entropijas krâtuvi, lai ìenerçtu\n"
-"kvalitatîvâkus gadîjumskaitïus."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed demons ïauj automâtiski atjauninât IP marðrutizatora tabulu,\n"
-"izmantojot RIP protokolu. Kaut gan RIP tiek plaði izmantots nelielos\n"
-"tîklos, sareþìîtâkiem tîkliem ir nepiecieðami sareþìîtâki marðrutizçðanas\n"
-"protokoli."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokols ïauj tîkla lietotâjiem saòemt veiktspçjas\n"
-"informâciju par jebkuru ðî tîkla datoru."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokols rusers tîkla lietotâjiem ïauj noskaidrot, kuru lietotâju\n"
-"sesijas ir atvçrtas citos atbildoðajos datoros."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokols rwho attâliem lietotâjiem ïauj saòemt visu atvçrto lietotâju\n"
-"sesiju sarakstu no datora, kurâ darbojas rwho demons (lîdzîgi finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Palaist X-Window sistçmu startçðanas laikâ"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog ir mehânisms, ko daudzi demoni izmanto ziòojumu grâmatoðanai\n"
-"daudzos sistçmas þurnâlu failos. Ir gudra doma vienmçr darbinât syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startç un aptura X Fontu Serveri sâknçðanas un aizvçrðanas laikâ."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izvçlçties, kurus servisus vajag automâtiski startçt ielâdes laikâ"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printeris"
-
-#
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internets"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistçmas reþîms"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Attâla lpd printera opcijas"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Serveris, Datubâzes"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ierîce"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Uzmanîbu"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Papildinât"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Stâvoklis:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektors"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Citur pasaulç"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Interneta pieeja"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimçdiji - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Izstrâde, Tîmeklis"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Pieslçgties Internetam"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Tîkla interfeiss"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB servera resurss"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spçles"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Eksperta"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalçju pakotni %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Man neizdodas nolasît partîciju tabulu, priekð manis tâ ir pârâk bojâta :(\n"
-"Es mçìinâðu turpinât, atslçdzot sliktâs partîcijas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Kïûda"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Pçcinstalçðanas konfigurçðana"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Sâknçðanas stila konfigurçðana"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Apsveicam!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalçt"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Lietotâju pievienoðana"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatçju loopback failu %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Pakotòu grupu izvçle"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Lûdzu izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Noòemt rindu"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Noòemt Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Lietotâja vârds"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Lûdzu notestçjiet peli"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Lûdzu mçìiniet vçlreiz"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Lûdzu mçìiniet vçlreiz"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Bez paroles"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN pieslçgums"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Izvçlieties printera pieslçgumu"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Lûdzu izvçlieties jûsu tastatûras izkârtojumu."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Lûdzu uzklikðíiniet uz partîcijas"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Lûdzu izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Lûdzu notestçjiet peli"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Tîkla interfeiss"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Lietotâja vârds"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Lûdzu izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Lûdzu izvçlieties izmantojamo valodu."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Cietâ diska noteikðana"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Lietotâja vârds"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ritenis"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ritenis"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Moduïa opcijas:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Tîkla konfigurâcija"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Lûdzu izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Lûdzu izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Failu sistçmu uzstâdîðana"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcijas"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Lûdzu norâdiet, kuram seriâlajam portam ir pieslçgts modçms."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Tîkla konfigurâcija"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Lûdzu izvçlieties jûsu peles tipu."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Atjanot no disketes"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Lûdzu izvçlieties jûsu peles tipu."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Cits"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Sistçmas instalçðana"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Atjaunot no faila"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Atjaunot no faila"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Pielâgota"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Palîdzîba"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Atpakaï"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Stâvoklis:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Atjaunot no faila"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Tâlâk ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Instalçjamo pakotòu izvçle"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Lûdzu izvçlieties izmantojamo valodu."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Lûdzu izvçlieties izmantojamo valodu."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Lûdzu izvçlieties izmantojamo valodu."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Slikts rezerves kopijas fails"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Saglabât failâ"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Lûdzu notestçjiet peli"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Lûdzu izvçlieties pakotnes, ko vçlaties instalçt"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Tîkla konfigurâcija"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Tîkla konfigurâcija"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Failu sistçmu uzstâdîðana"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s uzstâdîðana neizdevâs. Uzradâs ðâda kïûda:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "tîkla karte nav atrasta"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Izdarîts"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Disketes formatçðana"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Sagatavoju instalçðanu"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "ierobeþot"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ierobeþot"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Diska formatçðana"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN konfigurâcija"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Montçðanas punkts"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izvçlieties partîcijas, ko vçlaties formatçt"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Birojs"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Pârtraukt"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printeris"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Sistçmas instalçðana"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Izvçlieties failu"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Attâls printeris"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Jûsu sistçmâ nav tîkla adaptera!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalçt"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Jûsu sistçmâ nav tîkla adaptera!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Instalçðanas beigas"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Interneta pieslçguma koplietoðana"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir ieslçgta"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneta pieslçguma koplietoðana jau ir uzstâdîta.\n"
-"Paðlaik tâ ir ieslçgta.\n"
-"\n"
-"Ko jûs vçlaties darît?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "atslçgt"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "atmest"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "pârkonfigurçt"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Noskaidroju ierîces..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir atslçgta"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir atslçgta"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneta pieslçguma koplietoðana jau ir uzstâdîta.\n"
-"Paðlaik tâ ir atslçgta.\n"
-"\n"
-"Ko jûs vçlaties darît?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ieslçgt"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir ieslçgta"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Datoru var konfigurçt tâ, lai kopîgi izmantotu Interneta pieslçgumu.\n"
-"\n"
-"Piezîme: jums ir nepiecieðams atseviðís tîkla adapteris, lai uzstâdîtu "
-"lokâlo datortîklu (LAN).\n"
-"\n"
-"Vai vçlaties uzstâdît Interneta pieslçguma koplietoðanu?"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interfeiss"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Jûsu sistçmâ nav tîkla adaptera!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Jûsu sistçmâ nav atrasts neviens ethernet tîkla adapteris. Lûdzu izmantojiet "
-"dzelþu konfigurçðanas rîku."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Tîkla interfeiss"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Jûsu sistçmâ ir tikai viens konfigurçts tîkla adapteris:\n"
-"\n"
-"%s\n"
-"\n"
-"Vai vçlaties uzstâdît jûsu lokâlo datortîklu ar ðo adapteri?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Lûdzu izvçlieties, kurð tîkla adapteris bûs pieslçgts jûsu lokâlajam "
-"datortîklam."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitors nav konfigurçts"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Sâknçðanas stila konfigurçðana"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Interneta konfigurâcija"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS servera IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potenciâls LAN adreðu konflikts atklâts ðajâ %s! konfigurâcijâ!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Brîdinâjums! Ir atklâta eksistçjoða ugunsmûra konfigurâcija. Pçc "
-"instalçðanas jums varbût vajadzçs patstâvîgi pielabot konfigurâciju."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurçju..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Tiek konfigurçti skripti, instalçtas programmas, startçti serveri..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problçmas, instalçjot pakotni %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Viss ir konfigurçts.\n"
-"Tagad jûs varat dalîties Interneta pieslçgumâ ar citiem jûsu lokâlajam\n"
-"datortîklam pieslçgtiem datoriem, izmantojot automâtisku tîkla "
-"konfigurçðanu\n"
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Interneta pieslçguma koplietoðana jau ir uzstâdîta.\n"
-"Paðlaik tâ ir atslçgta.\n"
-"\n"
-"Ko jûs vçlaties darît?"
-
-#: ../../standalone/drakgw_.c:690
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Interneta pieslçguma koplietoðana jau ir uzstâdîta.\n"
-"Paðlaik tâ ir ieslçgta.\n"
-"\n"
-"Ko jûs vçlaties darît?"
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneta pieslçguma koplietoðana paðlaik ir ieslçgta"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interneta pieslçgums un konfigurâcija"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Interneta pieslçguma koplietoðana"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Tîkla konfigurâcija (%d adapteri)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profils: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Dzçst profilu..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Dzçðamais profils:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Jauns profils..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Resursa vârds: "
-
-#
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Interneta pieeja"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tips:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Vârteja:"
-
-#
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "interfeiss:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Stâvoklis:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurçt Interneta pieeju..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Draiveris"
-
-#
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfeiss"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Protocol"
-msgstr "Protokols"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Stâvoklis:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurçt lokâlo datortîklu..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Meistars..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Konfigurâcijas izmçìinâðana"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Nav pieslçgts"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nav pieslçgts"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapteris %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klients"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktîva"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktîva"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Interneta pieslçguma konfigurâcija"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Interneta pieslçguma konfigurâcija"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Savienojuma tips: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Vârteja"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet karte"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klients"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Uzstâdu droðîbas lîmeni"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Pieslçgties Internetam"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izvçlieties izmantojamo rîku"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanâdas (Kvebeka)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Eiropa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandes"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Eiropa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seriâla"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pielietojums: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Lûdzu izvçlieties jûsu tastatûras izkârtojumu."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vai vçlaties, lai BackSpace konsolç darbotos kâ Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Nomainiet Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Lûdzu ielieciet instalâcijas Cd-Rom un nospiediet Labi, kad tas izdarîts.\n"
-"Ja jums nav ðî diska, nospiediet Atcelt, lai neuzsâktu uzlaboðanu no tîkla."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Neizdodas uzsâkt uzlaboðanu no tîkla !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Râdît tikai par ðodienu"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fails/_Jauns"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fails/_Atvçrt"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fails/_Saglabât"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fails/Saglabât _kâ"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fails/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcijas"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcijas/Tests"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Palîdzîba"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Palîdzîba/_Par..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Lietotâja vârds"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ziòojumi"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "meklçt"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Rîks þurnâlu pârlûkoðanai"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Uzstâdîjumi"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "sakrît"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "bet nesakrît"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Izvçlitesis failu"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendârs"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Faila saturs"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "lûdzu gaidiet, analizçju failu: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Iziet"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ierîce"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatçju"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Konfigurâcija"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Saglabât kâ..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Lûdzu izvçlieties jûsu peles tipu."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nav atrasta seriâla_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Vai emulçt treðo pogu?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Izvçlieties grafisko karti"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Sâknçjamâ ierîce"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Tika atklâta ugunsmûra konfigurâcija!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Valodas izvçle"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Instalçðanas klases izvçle"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Cietâ diska noteikðana"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Peles konfigurçðana"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tastatûras izvçle"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Failu sistçmu uzstâdîðana"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Diska formatçðana"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Instalçjamo pakotòu izvçle"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistçmas instalçðana"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Lietotâju pievienoðana"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Tîkla konfigurçðana"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Servisu konfigurçðana"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Sâknçtâja instalçðana"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Sistçmdisketes radîðana"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X konfigurçðana"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Sistçmas instalçðana"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Instalçðanas beigas"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adapteris %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kïûda, atverot %s ierakstîðanai: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Tîkla konfigurçðanas meistars"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Lûdzu gaidiet, gatavoju instalâciju"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Serveris, Tîmeklis/FTP"
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Tîkla dators, X klients"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Birojs"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Rîki darbam ar Palm Pilot vai Visor"
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "KDE darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Serveris, Ugunsmûris/Marðrutizators"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Biroja programmas: teksta procesori (kword, abiword), izklâjlapas (lspread, "
-"gnumeric), pdf skatîtâji, u.c."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio rîki: mp3 un midi atskaòotâji, mikðeri u.c."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Grâmatas un Howto faili par Linux un Brîvo programmatûru"
-
-#
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE darbastacija"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm u.c."
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimçdiji - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Rîki pastam, jaunumiem, tîmeklim, failu saòemðanai un èatam"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Serveris, Datubâzes"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Vai vçlaties izmçìinât ðo konfigurâciju?"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimçdiji - Skaòa"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilîti"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentâcija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsoles rîki"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneta dators"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimçdiju dators"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN konfigurâcija"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Citas grafiskas darbavirsmas (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, galvenâ grafiskâ vide kopa ar papildus rîku kolekciju"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Rîki CD disku radîðanai un ierakstîðanai"
-
-#
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Biroja dators"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "serveris"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm u.c."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiskâs programmas, piemçram, The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C un C++ izstrâdes bibliotçkas, programmas un include faili"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Serveris, Tîkla datora serveris"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Serveris, Pasts/Grupu rîki/Jaunumi"
-
-#
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spçïu dators"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video atskaòotâji un redaktori"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimçdiji - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Izklaides programmas: arkâde, galdiòspçles, stratçìija u.c."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Rîku komplekts, lai lasîtu un sûtîtu pastu vai jaunumus (pine, mutt, tin..) "
-"un pârlûkotu Tîmekli"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhivçðana, emulatori, novçroðana"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personîgâs finanses"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafiskâ vide ar lietotajiem draudzîgu programmu komplektu un darbavirsmas "
-"rîkiem"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interneta pieeja"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Skaòas un video atskaòoðanas/rediìçðanas programmas"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Citas grafiskâs darbavirsmas"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktori, èaulas, failu rîki, terminâïi"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmas jûsu finanðu pârvaldîðanai, piemçram, gnucach"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personîgâs informâcijas menedþments"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimçdiji - CD ierakstîðana"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Zinâtniskâ darbastacija"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Pârtraukt"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Nevienu"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Norâdiet noklusçto lietotâju:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Attâls printeris"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Tagad jûs varat norâdît parametrus modulim %s."
-
-#~ msgid "Low"
-#~ msgstr "Zems"
-
-#~ msgid "Medium"
-#~ msgstr "Vidçjs"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Daþi uzlabojumi ðim droðîbas lîmenis, un galvenais ir tas, ka tagad ir\n"
-#~ "vairâk droðîbas brîdinâjumu un pârbauþu."
-
-#~ msgid "mount failed"
-#~ msgstr "montçðana neizdevâs"
-
-#~ msgid "Boot mode"
-#~ msgstr "Sâknçðanas reþîms"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Eksperta"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux laiku rçíina pçc GMT jeb \"Grînièas Meridiâna Laika\" un "
-#~ "pârvçrð\n"
-#~ "to par vietçjo laiku atbilstoði jûsu izvçlçtajai laika joslai."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Pieslçgties Internetam"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Atslçgties no Interneta"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigurçt tîkla pieslçgumu (LAN vai Interneta)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Uz kuru disku vçlaties to pârvietot?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Lûdzu izvçlieties pakotnes, ko vçlaties instalçt"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome darbastacija"
-
-#~ msgid "authentification"
-#~ msgstr "autentifikâcija"
-
-#~ msgid "user"
-#~ msgstr "lietotâjs"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Skançju piejamos nfs kopîgos resursus"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Skançju piejamos nfs kopîgos resursus uz servera %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Skançju piejamos samba kopîgos resursus"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Skançju piejamos samba kopîgos resursus uz servera %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Lûdzu izvçlieties jûsu peles tipu."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Iziet"
-
-#~ msgid "Removable media"
-#~ msgstr "Izòemams datu nesçjs"
-
-#~ msgid "Active"
-#~ msgstr "Aktîva"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nç"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Printeris, modelis \"%s\", atrasts pie "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Lokâlâ printera ierîce"
-
-#~ msgid "Printer Device"
-#~ msgstr "Printera ierîce"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Attâls CUPS serveris"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Attâls CUPS serveris"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistçmas reþîms"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Cits"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Lûdzu izvçlieties jûsu tastatûras izkârtojumu."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Lûdzu uzklikðíiniet uz partîcijas"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tips: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Slikts rezerves kopijas fails"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "X konfigurçðana"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Printera ierîce"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Atcelt"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Labi"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Pele"
-
-#
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Izmçìinu pieslçgumu..."
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Izmçìinu pieslçgumu..."
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sistçma paðlaik ir pieslçgta Internetam."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Norâdiet apjomu, ko vçlaties instalçt"
-
-#~ msgid "Total size: "
-#~ msgstr "Kopçjais izmçrs: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Lûdzu uzgaidiet, "
-
-#~ msgid "Total time "
-#~ msgstr "Kopçjais laiks"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Vai izmantot jau esoðo X11 konfigurâciju?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Kurai ierîcei ir pieslçgts printeris\n"
-#~ "(atcerieties, ka /dev/lp0 atbilst LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Brîdinâjums, tîkla adapteris jau ir konfigurçts.\n"
-#~ "Vai vçlaties to konfigurçt atkârtoti?"
-
-#~ msgid "New"
-#~ msgstr "Jauns"
-
-#~ msgid "Remote"
-#~ msgstr "Attâla"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Lûdzu uzklikðíiniet uz partîcijas"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Nenoteiktîba (%s), esiet precîzâks\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (noklusçti %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Jûsu izvçle? (noklusçti %s  ievadiet `none', ja nav) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "lasîðanai nevar atvçrt /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Vai vçlaties pârstartçt tîklu"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Vai jûs piekrîtat?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Gatavojos pârstartçt tîkla ierîci:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Gatavojos pârstartçt tîkla ierîci %s. Vai piekrîtat?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ja vien jûs neesat pârliecinâts par citu izvçli, parasti ir jâizvçlas\n"
-#~ "\"/dev/hda\" (primârais galvenais IDE disks) vai \"/dev/sda\" (pirmais\n"
-#~ "SCSI disks)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Savienojuma tips: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Norâdiet noklusçto lietotâju:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Lûdzu notestçjiet peli"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Lûdzu norâdiet vçlamo instalçðanas un sistçmas izmantoðanas valodu."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Lai turpinâtu instalçðanu, jums ir jâpieòem ðîs licences nosacîjumi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nospiediet \"Pieòemt\", ja piekrîtat nosacîjumiem.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nospiediet \"Noraidît\", ja nepiekrîtat nosacîjumiem. Instalçðana tiks "
-#~ "pârtraukta bez paðreizçjâs\n"
-#~ "konfigurâcijas izmaiòâm."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Sarakstâ norâdiet jûsu tastatûrai atbilstoðu izkârtojumu"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Ja vçlaties, lai citas valodas (izòemot to, ko norâdîjât instalçðanas\n"
-#~ "sâkumâ) bûtu pieejamas pçc instalçðanas, lûdzu norâdiet tâs augstâk\n"
-#~ "esoðajâ sarakstâ. Ja vçlaties izmantot visas, nospiediet \"Viss\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Izvçlieties:\n"
-#~ "\n"
-#~ "  - Pielâgota: Ja pietiekami labi pârzinat GNU/Linux, jums tiks dota\n"
-#~ "    iespçja norâdît sistçmu pielietojumu. Sîkâka informâcija bûs\n"
-#~ "    pieejam vçlâk.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Eksperta: Noderçs, ja jûs labi pârzinat GNU/Linux un vçlaties veikt\n"
-#~ "    precîzi pielâgotu instalâciju. Tâpat kâ pielâgotas instalâcijas\n"
-#~ "    gadîjumâ, jums tiks dota iespçja norâdît sistçmas pielietojumu.\n"
-#~ "    Tomçr lûdzu, NEIZVÇLIETIES ÐO, JA JÛS NEESAT PÂRLIECINÂTS PAR\n"
-#~ "    SAVU RÎCÎBU!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Tagad jums ir jânorâda maðînas pielietojums. Varat izvçlçties:\n"
-#~ "\n"
-#~ "* Darbastacija: ðî ir ideâla izvçle, ja plânojat sistçmu galvenokârt "
-#~ "izmantot ikdienas vajadzîbâm birojâ vai mâjâs.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Izstrâdei: ja plânojat sistçmu izmantot galvenokârt programmatûras "
-#~ "izstrâdei, ðî ir laba izvçle. Ðajâ\n"
-#~ " gadîjumâ tiks instalçts pilns programmu komplekts, lai jûs varçtu "
-#~ "kompilçt, atkïûdot un formatçt sâkumkodu vai\n"
-#~ " veidot programmatûras pakotnes.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serveris: ja plânojat sistçmu izmantot kâ serveri, ðî ir laba izvçle. "
-#~ "Tas var bût failu serveris (NFS vai\n"
-#~ " SMB), drukas serveris (Unix stila vai Microsoft Windows stila), "
-#~ "autentificçðanas serveris (NIS),\n"
-#~ " datubâzu serveris utt. Ðajâ gadîjumâ neceriet, ka tiks instalçti kâdi "
-#~ "izskaistinâjumi (KDE, GNOME, un tml.)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Tagad varat izvçlçties instalçjamo vai uzlabojamo pakotòu grupu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pçc tam DrakX pârbaudîs, vai pietiek vietas to visu instalçðanai.\n"
-#~ "Ja nav vietas, jûs brîdinâs par to. Ja vçlaties turpinât, neskatoties\n"
-#~ "uz to, izvçlçto grupu instalçðana turpinâsies, taèu tiks izlaistas\n"
-#~ "daþas mazâk noderîgas pakotnes. Saraksta apakðâ varat izvçlçties\n"
-#~ "opciju \"Atseviðíu pakotòu izvçle\"; ðajâ gadîjumâ jums vajadzçs\n"
-#~ "caurskatît vairâk nekâ 1000 pakotòu sarakstu..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Tagad jûs varat atseviðíi izvçlçties visas pakotnes, ko gribat "
-#~ "insrtalçt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jûs varat izvçstr vai sakïaut koku, noklikðíinot uz opcijâm pakotòu loga\n"
-#~ "kreisajâ stûrî.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûs vçlaties redzçt visas sakotnes sakârtotas alfabçta secîbâ,\n"
-#~ "noklikðíiniet uz ikonas \"Sakârtots vienâ sarakstâ vai pa grupâm\"\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûs nevçlaties, lai jûs brîdina par atkarîbâm, noklikðíiniet uz\n"
-#~ "\"Automâtiskas atkarîbas\". Ja jûs tâ izdarât, òemiet vçrâ, ka "
-#~ "atteikðanâs\n"
-#~ "no vienas pakotnes var izsaukt atteikðanos no vairâkâm citâm pakotnçm,\n"
-#~ "kas ir no tâs atkarîgas."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Ja jums ir visi ðajâ sarakstâ norâdîtie CD, nospiediet Labi.\n"
-#~ "Ja jums nav neviena no norâdîtajiem CD, nospiediet Atcelt.\n"
-#~ "Ja trûkst tikai daþu CD, sarakstâ atslçdziet tos un nospiediet Labi."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Ja vçlaties savu datoru pieslçgt Internetam vai lokâlam datortîklam,\n"
-#~ "lûdzu izvçlieties pareizu opciju. Lûdzu vispirms ieslçdziet attiecîgu\n"
-#~ "ierîci, pirms izvçlaties opciju, lai DrakX noteiktu to automâtiski.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jums nav nekâda pieslçguma Internetam vai lokâlam datortîklam,\n"
-#~ "izvçlieties \"Atslçgt tîklu\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûs vçlaties konfigurçt tîklu vçlâk pçc instalçðanas, vai arî esat\n"
-#~ "jau pabeiguði konfigurçt jûsu tîkla pieslçgumu, izvçlieties \"Izdarîts\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modçms nav atrasts. Lûdzu norâdiet, kuram seriâlajam portam tas "
-#~ "pieslçgts.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jûsu zinâðanai, pirmais seriâlais ports (ko Microsoft Windows sauc par\n"
-#~ "\"COM1\") Linux vidç tiek saukts par \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Tagad jûs varat ievadît iezvanpieejas opcijas. Ja jûs nezinat vai neesat\n"
-#~ "pârliecinâts, ko ievadît, pareizu informâciju var saòemt no jûsu "
-#~ "Interneta\n"
-#~ "pakalpojumu sniedzçja. Ja jûs ðeit neievadât DNS (vârdu servera) "
-#~ "informâciju,\n"
-#~ "ðî informâcija tiks iegûta no jûsu Interneta pakalpojumu sniedzçja\n"
-#~ "pieslçgðanâs laikâ."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Ja jums ir ârçjs modçms, lûdzu ieslçdziet to un ïaujiet DrakX to noteikt "
-#~ "automâtiski."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Lûdzu ieslçdziet jûsu modçmu un norâdiet pareizo modeli."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ja jûs neesat pârliecinâts, vai augstâk esoðâ informâcija ir pareiza, "
-#~ "vai\n"
-#~ "arî jûs nezinat vai neesat pârliecinâts, ko ievadît, pareizu informâciju\n"
-#~ "var saòemt no jûsu Interneta pakalpojumu sniedzçja. Ja jûs ðeit "
-#~ "neievadât\n"
-#~ "DNS (vârdu servera) informâciju, ðî informâcija tiks iegûta no jûsu\n"
-#~ "Interneta pakalpojumu sniedzçja pieslçgðanâs laikâ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Tagad varat ievadît jûsu datora vârdu, ja tas nepiecieðamas.\n"
-#~ "Ja jûs to nezinat vai neesat pârliecinâts, ko ievadît, pareizu "
-#~ "informâciju\n"
-#~ "var saòemt no jûsu Interneta pakalpojumu sniedzçja."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Tagad varat konfigurçt tîkla ierîci.\n"
-#~ "\n"
-#~ "   * IP adrese: ja to nezinat vai neesat pârliecinâts, pajautâjiet tîkla "
-#~ "administratoram.\n"
-#~ "     Jums nav jâievada IP adrese, ja zemâk izvçlaties \"Automâtisks IP"
-#~ "\".\n"
-#~ "\n"
-#~ "  - Tîklamaska: \"255.255.255.0\" parasti ir laba izvçle. Ja nezinat vai "
-#~ "neesat pârliecinâts, pajautâjiet\n"
-#~ "tîkla administratoram.\n"
-#~ "\n"
-#~ "  - Automâtisks IP: ja jûsu datortîkls izmanto BOOTP vai DHCP protokolu, "
-#~ "izvçlieties ðo opciju. Kad tâ izvçlçta,nnav jânorâda \"IP addrese\". Ja "
-#~ "nezinat vai neesat pârliecinâts, pajautâjiet tîkla administratoram."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Tagad varat ievadît jûsu datora vârdu, ja tas nepiecieðamas.\n"
-#~ "Ja jûs to nezinat vai neesat pârliecinâts, pajautâjiet tîkla "
-#~ "administratoram."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Tagad varat ievadît jûsu datora vârdu, ja tas nepiecieðams.\n"
-#~ "Ja nezinat vai neesat pârliecinâts, atstâjiet tukðu."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Tagad jûs varat ievadît iezvanîðanâs opcijas. Ja jûs nezinat, ko "
-#~ "ievadît,\n"
-#~ "vajadzîgo informâciju var saòemt no jûsu ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ja jûs izmantosit proxy serverus, lûdzu konfigurçjiet tos. Ja jûs\n"
-#~ "nezinat, vai izmantosit proxy, pajautâjiet tîkla administratoram vai\n"
-#~ "savam ISP."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Ja jûsu Interneta pieslçgums ir konfigurçts pareizi, jûs varat instalçt\n"
-#~ "kriptogrâfijas pakotnes. Vispirms norâdiet spoguïserveri, no kura\n"
-#~ "ielâdçt pakotnes, tad izvçlieties instalçjamâs pakotnes.\n"
-#~ "\n"
-#~ "\n"
-#~ "Atcerieties, ka spoguïserveris un kriptogrâfijas pakotnes ir jâizvçlas\n"
-#~ "atbilstoði jûsu valsts likumdoðanai."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Tagad varat norâdît laika joslu, kurâ jûs dzîvojat."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Jûs varat konfigurçt lokâlu printeri (kas pieslçgts jûsu datoram) vai\n"
-#~ "attâlu printeri (pieejami Unix, Netware vai Microsoft Windows tîklâ)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Ja jûs vçlaties izmantot printeri, izvçlieties vienu no drukas sistçmâm "
-#~ "- \n"
-#~ "CUPS vai LRP.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ir jauna, jaudîga un elastîga drukas sistçma Unix sistçmâm (CUPS\n"
-#~ "nozîmç \"Common Unix Printing System\"). Ðî ir noklusçtâ Mandrake Linux\n"
-#~ "drukas sistçma.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR ir vecâ drukas sistçma, kas tika izmantota iepriekðçjâs Mandrake "
-#~ "Linux\n"
-#~ "versijâs.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jums nav printera, izvçlieties \"Neviens\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux var strâdât ar daþâdiem printeru tipiem. Katram no ðiem tipiem\n"
-#~ "ir nepiecieðama atðíirîgi uzstâdîjumi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûsu printeris ir fiziski pieslçgts jûsu datoram, izvçlieties "
-#~ "\"Lokâls\n"
-#~ "printeris\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ja jûs vçlaties piekïût printerim, kas ir pieslçgts attâlam Microsoft\n"
-#~ "Windows datoram (vai Unix datoram, kas izmanto SMB protokolu), "
-#~ "izvçlieties\n"
-#~ "\"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Lûdzu ieslçdziet jûsu printeri, pirms turpinât un ïaut DrakX to noteikt.\n"
-#~ "\n"
-#~ "Ðeit jums ir jâievada noteikta informâcija.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printera nosaukums: drukas spolçtâjs izmanto \"lp\" kâ noklusçto "
-#~ "printera nosaukumu, tâpçc jums ir jâbût\n"
-#~ "     printerim, kas saucas \"lp\". Ja jums ir tikai viens printeris, jûs "
-#~ "varat tam pieðíirt vairâkus nosaukumus.\n"
-#~ "     Nosaukumi ir jâatdala ar vertikâlas svîtras simbolu (\"|\"). "
-#~ "Tâdçjâdi, ja jûs gribat izmantot saprotamâku\n"
-#~ "     nosaukumu, jûs to varat norâdît pirmo, piemçram, \"Mans printeris|lp"
-#~ "\". Printeris, kura nosaukumâ ir \"lp\",\n"
-#~ "     bûs noklusçtais printeris.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Apraksts: nav obligâts, bet var noderçt, ja jûsu datoram ir "
-#~ "pieslçgti vairâki printeri, vai arî jûs gribat\n"
-#~ "     atïaut citiem datoriem pieslçgties jûsu printerim.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Atraðanâs vieta: ja gribat, varat sniegt informâciju par jûsu "
-#~ "printera\n"
-#~ "     atraðanâs vietu (ðeit jûs varat rakstît visu, ko vçlaties, "
-#~ "piemçram,\n"
-#~ "     \"otrajâ stâvâ\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Ðeit jums ir jâievada noteikta informâcija.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Rindas nosaukums: drukas spolçtâjs izmanto \"lp\" kâ noklusçtâ "
-#~ "printera nosaukumu, tâpçc jums ir jâbût\n"
-#~ "     printerim, kas saucas \"lp\". Ja jums ir tikai viens printeris, jûs "
-#~ "varat tam pieðíirt vairâkus nosaukumus.\n"
-#~ "     Nosaukumi ir jâatdala ar vertikâlas svîtras simbolu (\"|\"). "
-#~ "Tâdçjâdi, ja jûs gribat izmantot saprotamâku\n"
-#~ "     nosaukumu, jûs to varat norâdît pirmo, piemçram, \"Mans printeris|lp"
-#~ "\". Printeris, kura nosaukumâ ir \"lp\",\n"
-#~ "     bûs noklusçtais printeris.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Spolçðanas katalogs: tieði ðajâ katalogâ tiek glabâti drukas "
-#~ "uzdevumi. Ja nezinat, ko ievadît,\n"
-#~ "     atstâjiet noklusçto vçrtîbu\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printera pieslçgums: Ja jûsu printeris fiziski ir pieslçgts jûsu "
-#~ "datoram, izvçlieties \"Lokâls printeris\".\n"
-#~ "     Ja jûs vçlaties piekïût printerim, kas pieslçgts attâlam Unix "
-#~ "datoram, izvçlieties \"Attâls lpd printeris\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ja jûs vçlaties izmantot printeri, kas pieslçgts attâlam Microsoft "
-#~ "Windows datoram (vai Unix datoram, kas\n"
-#~ "     izmanto SMB protokolu), izvçlieties \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Ja jûs vçlaties izmantot printeri, kas atrodas NetWare tîklâ, "
-#~ "izvçlieties \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Jûsu printeris nav atrasts. Lûdzu ievadiet ierîces nosaukumu, kurai tas "
-#~ "ir\n"
-#~ "pieslçgts.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jûsu zinâðanai, vairums printeru ir pieslçgti pirmajam paralçlajam "
-#~ "portam.\n"
-#~ "Ðo portu GNU/Linux vidç sauc par \"/dev/lp0\" bet Microsoft Windows vidç\n"
-#~ "par \"LPT1\"."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Tagad jums ir jâizvçlâs printeri no augstâk esoðâ saraksta."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Lûdzu izvçlieties jûsu printerim atbilstoðas opcijas.\n"
-#~ "Izlasiet dokumentâciju, ja nezinat, ko izvçlçties.\n"
-#~ "\n"
-#~ "\n"
-#~ "Nâkamajâ solî jûs varçsit pârbaudît izvçlçto konfigurâciju un izmainît "
-#~ "to,\n"
-#~ "ja printeris nedarbosies pareizi."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Tagad varat ievadît jûsu Mandrake Linux sistçmas root paroli.\n"
-#~ "Parole ir jâievada divas reizes, lai pârliecinâtos, ka abas kopijas\n"
-#~ "sakrît un jûs neesat kïûdîjies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root ir sistçmas administrators un vienîgais lietotâjs, kam ir atïauts\n"
-#~ "izmainît sistçmas konfigurâciju. Ðî iemesla dçï rûpîgi izvçlieties ðo\n"
-#~ "paroli! Neautorizçta root konta izmantoðana var bût ïoti bîstama\n"
-#~ "sistçmas integritâtei, tâs datiem un citâm tai pieslçgtajâm sistçmâm.\n"
-#~ "\n"
-#~ "\n"
-#~ "Parolei ir jâbût vismaz 8 simbolus garai burtu un ciparu kombinâcijai.\n"
-#~ "To nekad nevajadzçtu pierakstît uz papîra.\n"
-#~ "\n"
-#~ "\n"
-#~ "Neizvçlieties pârâk garu vai sareþìîtu paroli: jums to ir\n"
-#~ "jâspçj atcerçties bez pârâk lielas piepûles."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Tagad jûs varat pievienot vienu vai vairâkus \"parastu\" lietotâju\n"
-#~ "kontus kâ pretstatu \"priviliìçta\" lietotâja kontam root. Varat "
-#~ "izveidot\n"
-#~ "vienu vai vairâkus kontus katrai personai, kam bûs atïauts izmantot\n"
-#~ "jûsu datoru. Atcerieties, ka katram lietotâja kontam ir sava\n"
-#~ "konfigurâcija (grafiskâ vide, programmu konfigurâcija un tml.) un savs\n"
-#~ "\"mâjas katalogs\", kurâ ðî konfigurâcija tiek glabâta.\n"
-#~ "\n"
-#~ "\n"
-#~ "Vispirms izveidojiet kontu pats sev! Pat ja jûs bûsit vienîgais\n"
-#~ "datora lietotâjs, jûs NEDRÎKSTAT ikdienâ lietot root kontu: tas ir ïoti\n"
-#~ "liels droðîbas risks. Ïoti bieþi tikai daþi nepareizi nodrukâti burti\n"
-#~ "var padarît jûsu sistçmu nelietojamu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ðî iemesla dçï jums jâiereìistrçjas sistçmâ, izmantojot lietotâja kontu,\n"
-#~ "ko jûs tûlît izveidosit, un jâiereìistrçjas kâ root tikai "
-#~ "administrçðanas\n"
-#~ "un uzturçðanas uzdevumu veikðanai."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ir ïoti ieteicams izveidot sâknçðanas disketi. Ja jums neizdosies "
-#~ "startçt\n"
-#~ "savu datoru, tâ bûs vienîgais veids, kâ to izglâbt bez pârinstalçðanas."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO un grub galvenâs opcijas ir:\n"
-#~ "  - Sâknçðanas ierîce: Norâda ierîces nosaukumu (t.i., cietâ diska\n"
-#~ "partîciju), uz kuras atrodas sâknçðanas sektors. Ja vien neesat\n"
-#~ "pârliecinâts par ko citu, izvçlieties \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauze pirms noklusçtâ attçla sâknçðanas: Norâda laiku sekundes\n"
-#~ "desmitdaïâs, ko sâknçtâjs gaida pirms pirmâ attçla ielâdes.\n"
-#~ "Tas ir ieteicams sistçmâm, kas sâknçjas tieði no cietâ diska tûlît pçc\n"
-#~ "tastatûras aktivizçðanas. Sâknçðana sâkas bez pauzes, ja \"pauze\" nav\n"
-#~ "norâdîta vai ir nulle.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video reþîms: Tas norâda VGA teksta reþîmu, kas tiek izvçlçts\n"
-#~ "sâknçðanas laikâ. Ir pieejamas sekojoðas vçrtîbas: \n"
-#~ "    * normâls: izvçlas normâlu 80x25 teksta reþîmu.\n"
-#~ "    * <skaitlis>:  izmanto atbilstoðu teksta reþîmu."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO ir sâknçtâjs SPARC sistçmâm: tas spçj sâknçt GNU/Linux\n"
-#~ "vai jebkuru citu operçtâjsistçmu, kas ir uzstâdîta jûsu datorâ.\n"
-#~ "Parasti citas operçtâjsistçmas tiek korekti noteiktas un instalçtas.\n"
-#~ "Ja tâ nenotiek, jûs ðajâ ekrânâ varat ar roku pievienot ierakstu. Esiet\n"
-#~ "uzmanîgs, izvçloties pareizus parametrus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Jûs varbût arî vçlaties neïaut nevienam piekïût pârçjâm "
-#~ "operçtâjsistçmâm,\n"
-#~ "un ðajâ gadîjumâ jûs varat izdzçst attiecîgos ierakstus. Bet ðajâ\n"
-#~ "gadîjumâ jums bûs nepiecieðama sâknçðanas diskete, lai tâs sâknçtu!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO galvenâs opcijas ir:\n"
-#~ "  - Sâknçtâja instalçðana: Norâda, kur jûs vçlaties novietot "
-#~ "informâciju,\n"
-#~ "kas nepiecieðama GNU/Linux sâknçðanai. Ja vien neesat pârliecinâts\n"
-#~ "par ko citu, izvçlieties \"Diska pirmais sektors (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pauze pirms noklusçtâ attçla sâknçðanas: Norâda laiku sekundes\n"
-#~ "desmitdaïâs, ko sâknçtâjs gaida pirms pirmâ attçla ielâdes.\n"
-#~ "Tas ir ieteicams sistçmâm, kas sâknçjas tieði no cietâ diska tûlît pçc\n"
-#~ "tastatûras aktivizçðanas. Sâknçðana sâkas bez pauzes, ja \"pauze\" nav\n"
-#~ "norâdîta vai ir nulle."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ir pienâcis laiks konfigurçt X Window System, kas ir GNU/Linux GUI\n"
-#~ "(grafiskâ lietotâja interfeisa) pamats. Lai to izdarîtu, jums ir\n"
-#~ "jâkonfigurç video karte un monitors. Tomçr vairums no ðiem soïiem ir\n"
-#~ "automatizçti, tâpçc jûsu uzdevums var bût tikai pârbaudît izdarîto\n"
-#~ "izvçli un apstiprinât parametrus :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kad konfigurçðana ir pabeigta, tiks startçts X (ja vien jûs\n"
-#~ "nelûdzat DrakX to nedarît), lai jûs pârbaudîtu un apskatîtu, vai\n"
-#~ "parametri jûs apmierina. Ja tie neder, jûs varat atgriezties un tos\n"
-#~ "nomainît tik reizes, cik bûs nepiecieðams."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ja ar X konfigurâciju kaut kas nav kârtîbâ, izmantojiet ðîs opcijas,\n"
-#~ "lai pareizi konfigurçtu X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ja dodat priekðroku darba uzsâkðanai grafiskâ reþîmâ, izvçlietis \"Jâ\",\n"
-#~ "citâdi izvçlieties \"Nç\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Jûsu sistçma tiks pârstartçta.\n"
-#~ "\n"
-#~ "Pçc pârstartçðanas jûsu jaunâ Mandrake Linux sistçma tiks ielâdçta\n"
-#~ "automâtiski. Ja vçlaties sâknçt kâdu citu jau uzstâdîtu operçtâjsistçmu,\n"
-#~ "lûdzu izlasiet papildus norâdîjumus."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Èehijas (programmçtâju)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovâkijas (programmçtâju)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Veidojamâ profila nosaukums:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Ierakstît /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatçt visu"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Pçc visu partîciju formatçðanas"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "visi ðâjâs partîcijâs esoðie dati tiks pazaudçti"
-
-#~ msgid "Reload"
-#~ msgstr "Pârlâdçt"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Vai vçlaties izveidot auto instalçðanas disketi linux replikâcijai?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfigurâcija"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Izmantojot attâlu CUPS serveri, ðeit jums nav nepiecieðams\n"
-#~ "konfigurçt nevienu printeri. Printeri tiks atrasti automâtiski,\n"
-#~ "ja vien serveris nav pieslçgts citam tîklam; tâdâ gadîjumâ jums\n"
-#~ "ir jânorâda CUPS servera IP adrese un, iespçjams, porta numurs."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Attâlâ rinda"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domçna nosaukums"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Nav printera"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Tîkla konfigurâcija"
-
-#~ msgid "Profile "
-#~ msgstr "Profils "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Savienojuma tips: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Pieslçgties Internetam"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Atslçgties no Interneta"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Atslçgties no Interneta"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Atslçgties no Interneta"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Savienojuma nosaukums"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Noklusçts"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Konfigurâcijas faila saturu neizdodas saprast."
-
-#~ msgid "Adapter"
-#~ msgstr "Adapteris"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Atslçgt"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Ieslçgt"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Tagad varat izmçìinât peli. Izmantojiet pogas un riteni, lai\n"
-#~ "pârliecinâtos, ka konfigurâcija ir pareiza. Ja nav, varat nospiest\n"
-#~ "\"Atcelt\" un izvçlçties citu draiveri."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (vai ADSL) pieslçgums"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Pele"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Jûs varat tieði norâdît URI, lai piekïûtu printerim ar CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jâ, izdrukât ASCII izmçìinâjuma lapu"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jâ, izdrukât PostScript izmçìinâjuma lapu"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papîra izmçrs"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Vai izmest lapu pçc izdrukas?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint draivera opcijas"
-
-#~ msgid "Color depth options"
-#~ msgstr "Krâsu dziïuma opcijas"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Drukât tekstu kâ PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Vai labot teksta kâpòveida izdruku?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Lappuðu skaits vienâ izdrukas lapâ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Labâ/Kreisâ mala punktos (1/72 collas daïâs)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Augðçjâ/Apakðçjâ mala punktos (1/72 collas daïâs)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Papildus GhostScript opcijas"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Papildus teksta opcijas"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Aègârna lappuðu secîba"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Izvçlieties attâla printera pieslçgumu"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Katram printerim ir nepiecieðams nosaukums (piemçram, lp).\n"
-#~ "Var norâdît arî citus parametrus, piemçram, printera aprakstu vai tâ\n"
-#~ "atraðanâs vietu. Kâdu nosaukumu pieðíirt ðim printerim, un kâdâ veidâ\n"
-#~ "printeris ir pieslçgts?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Katrai drukas rindai (uz kuru tiek adresçti drukas uzdevumi) ir "
-#~ "nepiecieðams\n"
-#~ "nosaukums (bieþi lp) un tai piesaistîts spolçðanas katalogs. Kâdu "
-#~ "nosaukumu\n"
-#~ "un katalogu izmantot ðai rindai un kâ ir pieslçgts printeris?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Rindas nosaukums"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spolçðanas katalogs"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Lai palielinâtu sistçmas droðîbu, izvçlieties \"Izmantot shadow failu\"\n"
-#~ "un \"Izmantot MD5 paroles\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ja jûsu tîklâ lieto NIS, izvçlieties \"Izmantot NIS\". Ja jûs to nezinat\n"
-#~ "pajautâjiet savam tîkla administratoram."
-
-#~ msgid "yellow pages"
-#~ msgstr "dzeltenâs lapas"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN konfigurâcija"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Pakalpojumu sniedzçja dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Pakalpojumu sniedzçja dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kâ jûs vçlaties pieslçgties Internetam?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Izvçlieties failu"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Izmçìinu pieslçgumu..."
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Konfigurçju..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ðis startçðanas skripts mçìina ielâdçt moduïus jûsu usb pelei."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Sâknçðanas stila konfigurçðana"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Tagad, kad ir konfigurçts jûsu Interneta pieslçgums,\n"
-#~ "datoru var konfigurçt tâ, lai kopîgi izmantotu Interneta pieslçgumu.\n"
-#~ "Piezîme: jums ir nepiecieðams atseviðís tîkla adapteris, lai uzstâdîti "
-#~ "lokâlo datortîklu (LAN).\n"
-#~ "\n"
-#~ "Vai vçlaties uzstâdît Interneta pieslçguma koplietoðanu?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automâtiskas atkarîbas"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB konfigurçðana"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Sâknçðanas disketes radîðana"
-
-#~ msgid "Choice"
-#~ msgstr "Izvçle"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontâla jauka izskata aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikâla tradicionâla aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitors"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Tagad varat izvçlçties daþâdas sistçmas opcijas.\n"
-#~ "\n"
-#~ "* Izmantot cietâ diska optimizâcijas: ðî opcija var uzlabot cietâ diska   "
-#~ "veiktspçju, taèu tâ ir paredzçta tikai pieredzçjuðiem lietotâjiem:\n"
-#~ "  daþas kïûdainas mikroshçmas var iznîcinât jûsu datus, tâpçc jûs esat   "
-#~ "brîdinâts. Atcerieties, ka kodolâ ir iebûvçts disku un mikroshçmu\n"
-#~ "  melnais saraksts, tomçr, ja vçlaties iztikt bez nepatîkamiem\n"
-#~ "  pârsteigumiem, neizvçlieties ðo opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Izvçlieties droðîbas lîmeni: jûs varat izvçlçties sistçmas droðîbas\n"
-#~ "  lîmeni. Pilnîgu informâciju meklçjiet rokasgrâmatâ. Parasti, ja\n"
-#~ "  nezinat, atstâjiet noklusçto vçrtîbu.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precîzs RAM apjoms, ja nepiecieðams: diemþçl mûsdienu datoru\n"
-#~ "  pasaulç nav vienotas metodes, kâ pajautât BIOSam par jûsu datorâ\n"
-#~ "  uzstâdîtâs atmiòas apjomu. Rezultâtâ Linux ne vienmçr pareizi\n"
-#~ "  nosaka jûsu datora RAM apjomu. Ja tâ notiek, jûs ðeit varat\n"
-#~ "  norâdît pareizu RAM apjomu. Òemiet vçrâ, ka 2 vai 4 MB atðíirîba\n"
-#~ "  ir normâla.\n"
-#~ "\n"
-#~ "* Nomainâmu datu nesçju automontçðana: ja nevçlaties katru reizi montçt\n"
-#~ "  nomainâmus datu nesçjus (CD-ROM, disketi, Zip u.c.), drukâjot \"mount"
-#~ "\"   un \"umount\", izvçlieties ðo opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Iztîrît \"/tmp\" katras sâknçðanas laikâ: ja jûs vçlaties sistçmas   "
-#~ "sâknçðanas laikâ izdzçst visus failus un\n"
-#~ "  katalogus, kas atrodas \"/tmp\", izvçlieties ðo opciju.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ieslçgt NumLock palaiðanas laikâ: ja vçlaties, lai pçc sâknçðanas   "
-#~ "bûtu ieslçgts NumLock, izvçlieties ðo\n"
-#~ "  opciju. Òemiet vçrâ, ka to nevajadzçtu izvçlçties klçpjdatoriem, un "
-#~ "ka   NumLock var strâdât vai nestrâdât X vidç."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Atvainojiet, pasta konfigurçðana vçl nav realizçta. Esiet pacietîgi."
-
-#
-#~ msgid "Internet/Network access"
-#~ msgstr "Internets/Pieeja tîklam"
-
-#, fuzzy
-#~ msgid "Miscellaneous"
-#~ msgstr "Daþâdi jautâjumi"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Daþâdi jautâjumi"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Nevar izmantot supermount augstâ droðîbas lîmenî"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "òemiet vçrâ: PIE ÐÎ DROÐÎBAS LÎMEÒA ROOT SESIJAS ATVÇRÐANA NO KONSOLES\n"
-#~ "NAV ATÏAUTA! Ja vçlaties bût root, jums vispirms ir jâatver parasta\n"
-#~ "lietotâja sesija un tad jâizmanto \"su\". Vispârîgi runâjot, neceriet\n"
-#~ "izmantot savu datoru kam citam kâ vien servera uzdevumiem.\n"
-#~ "Jûs esat brîdinâts."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Esiet uzmanîgs, numlock ieslçgðana liek daudziem taustiòiem parasto\n"
-#~ "burtu vietâ râdît ciparus (piemçram, `p' nospieðana dod `6')"
-
-#~ msgid "not connected"
-#~ msgstr "nav pieslçgts"
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Atraðanâs vieta"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Zinâtniskâs programmas"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Serveris, Failu/Drukas/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Serveris, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pirmais DNS serveris"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Otrais DNS serveris"
-
-#~ msgid "using module"
-#~ msgstr "izmantojot moduli"
-
-#
-#~ msgid "Development, Database"
-#~ msgstr "Izstrâde, Datubâze"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Izstrâde, Integrçtâ vide"
-
-#
-#~ msgid "Development, Standard tools"
-#~ msgstr "Izstrâde, Standartrîki"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kuru(s) sâknçtâju(s) vçlaties izmantot?"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
diff --git a/perl-install/share/po/mt.po b/perl-install/share/po/mt.po
deleted file mode 100644
index cdf4678f3..000000000
--- a/perl-install/share/po/mt.po
+++ /dev/null
@@ -1,12071 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Ramon Casha <ramon.casha@linux.org.mt>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-10 18:12CET\n"
-"Last-Translator: Ramon Casha <ramon.casha@linux.org.mt>\n"
-"Language-Team: Maltese <mt@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Ikkonfigura l-heads kollha independentement"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Uża estensjoni Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ikkonfigura l-kard \"%s\" (%s) biss"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfigurazzjoni multi-head"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Is-sistema tiegħek tissaporti konfigurazzjoni \"multi-head\".\n"
-"Xi trid tagħmel?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Kard grafika"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Agħżel kard grafika"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Agħżel server X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Agħżel driver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Driver X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Liema konfigurazzjoni ta' XFree trid li jkollok?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D, imma b' XFree %s "
-"biss.\n"
-"Il-kard tiegħek hija magħrufa minn XFree %s, li jista' jkollu sapport aħjar "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s b'aċċelerazzjoni 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s.\n"
-"DIN HIJA FAĊILITÀ SPERIMENTALI U TISTA' TWAĦĦAL IL-KOMPJUTER."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s b'aċċelerazzjoni 3D ESPERIMENTALI"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Il-kard tiegħek tista' tagħmel użu minn aċċelerazzjoni 3D b' XFree %s.\n"
-"DIN HIJA FAĊILITÀ SPERIMENTALI U TISTA' TWAĦĦAL IL-KOMPJUTER.\n"
-"Il-card tiegħek hija magħrufa minn XFree %s, li jista' jkollu sapport aħjar "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (driver tal-iskrin għall-installazzjoni)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Konfigurazzjoni XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Agħżel id-daqs tal-memorja tal-kard tal-grafika"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Ikkonfigura għażliet tas-server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Agħżel skrin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Skrin"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Iż-żewġ parametri kritiċi huma frekwenza vertikali (vertical refresh rate), "
-"li\n"
-"hija r-rata li biha l-iskrin sħiħ jiġi aġġornat, u iżjed importanti il-"
-"frekwenza\n"
-"orizzontali (horizontal refresh rate), li hija r-rata li biha jiġu aġġornati "
-"l-linji.\n"
-"\n"
-"Huwa importanti ħafna li ma tistpeċifikax skrin b'rata iżjed mgħaġġla milli\n"
-"kapaċi juri l-iskrin tiegħek, għax tista' tagħmillu l-ħsara.\n"
-"Jekk għandek xi dubju, agħżel valur żgħir."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frekwenza orizzontali"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frekwenza vertikali"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Skrin mhux issettjat"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Kard grafika għad m'hix issettjata"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Reżoluzzjoni għadha ma ngħażlitx"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Trid tittestja din il-konfigurazzjoni?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Twissija: it-test ta' din il-kard grafika jista' jwaħħal il-kompjuter"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test tal-konfigurazzjoni"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ipprova ibdel xi parametri"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Instabet problema:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Ħiereġ f' %d sekondi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Dan is-seting huwa tajjeb?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Instabet problema. Ipprova ibdel xi parametri"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Reżoluzzjoni"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Agħżel reżoluzzjoni u finezza ta' kuluri"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Kard grafika: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Iżjed"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modalità esperti"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Uri kollox"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Reżoluzzjonijiet"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tqassim tat-tastiera: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip ta' maws: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Apparat maws: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skrin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frek.Orizzontali Skrin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frek. Vertikali Skrin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Kard grafika: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikazzjoni tal-kard grafika: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memorja grafika: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Numru ta' kuluri: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Reżoluzzjoni: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Qed nipprepara l-konfigurazzjoni X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "X'tixtieq tagħmel?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Nibdel l-iskrin"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Nibdel il-kard grafika"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Nibdel l-għażliet tas-server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Nibdel ir-reżoluzzjoni"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Nara l-informazzjoni"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Nerġa' nittestja"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Noħroġ"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Trid iżżomm il-bidliet?\n"
-"Il-konfigurazzjoni kurrenti hija:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X fil-bidu"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Nista' nissettja l-kompjuter biex awtomatikament jidħol f' X malli jitla'.\n"
-"Trid ittella' X Windows meta tixgħel?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Jekk jogħġbok oħroġ u erġa' idħol fuq %s biex tara l-bidliet."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Jekk jogħġbok oħroġ mid-desktop u agħfas Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kuluri (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 elf kulur (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 elf kulur (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljun kulur (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljun kulur (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB jew iżjed"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standard, 640x480 b' 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 b' 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514/kompatibbli, 1024x768 b' 87 Hz interlaced (ma jieħux 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 b' 87 Hz interlaced, 800x600 b' 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estiż, 800x600 b' 60 Hz, 640x480 b' 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA mhux interlaced, 1024x768 b' 60 Hz, 800x600 b' 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA frekwenza għolja, 1024x768 b' 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekwenza li jiflaħ 1280x1024 b' 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekwenza li jiflaħ 1280x1024 b' 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekwenza li jiflaħ 1280x1024 b' 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skrin li jiflaħ 1600x1200 b' 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skrin li jiflaħ 1600x1200 b' 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "L-ewwel settur tal-partizzjoni \"boot\""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "L-ewwel settur tal-ħard disk (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Installazzjoni SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Fejn tixtieq tinstalla l-\"bootloader\"?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Installazzjoni LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO b'menu testwali"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO b'menu grafiku"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Tella' minn DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Għażliet prinċipali tal-bootloader"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Liema bootloader tuża"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installazzjoni tal-bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Diska/apparat \"boot\""
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ma jaħdimx ma' kompjuters antiki)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Żgħir"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Konfigurazzjoni video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Stennija qabel ittella' l-għażla impliċita"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Password"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Password (erġa')"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Irrestrinġi l-għażliet tal-linja tal-kmand"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restrict"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Clean /tmp kull meta tixgħel"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Daqs eżatt ta' memorja jekk meħtieġ (sibt %d RAM)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Ippermetti profili differenti"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Agħti d-daqs tar-RAM f'MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L-għażla \"irrestrinġi l-għażliet tal-linja tal-kmand\" m'għandha ebda "
-"effett minngħajr password"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Erġa' pprova"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Il-passwords ma jaqblux"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Messaġġ tal-bidu"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Stennija Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Skadenza tal-ħin għall-kernel boot"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Ippermetti boot mis-CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Ippermetti Boot OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS Impliċitu?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hawn huma l-elementi differenti>\n"
-"Tista' żżid iżjed jew tibdel dawk li hemm."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Żid"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Lest"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Biddel"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Liema tip ta' sistema operattiva trid iżżid?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "OS ieħor (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "OS ieħor (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "OS ieħor (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Żid fl-aħħar"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Ikteb-aqra"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabella"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Mhux sikur"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Isem"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Impliċitu"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Daqs ta' initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "EbdaVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Neħħi element"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Isem vojt mhux aċċettat"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Trid tispeċifika \"image\" tal-kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Trid tispeċifika partizzjoni \"root\""
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Dan l-isem diġà qed jintuża"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Sibt %s interfaċċji %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Għandek iżjed?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Il-kompjuter għandu interfaċċji %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Le"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Iva"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ara info. dwar ħardwer"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Qed ninstalla driver għal %s kard %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulu %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Liema driver %s tridni nipprova?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"F'ċerti każi id-driver %s ikollu bżonn iżjed informazzjoni biex jaħdem\n"
-"sew, għalkemm is-soltu jaħdem sew mingħajrha. Trid tispeċifika xi\n"
-"informazzjoni lid-driver, jew tħallih ifittex l-apparat waħdu? Kulltant, "
-"it-\n"
-"tfittix iġiegħel lill-kompjuter jeħel, imma dan m'għandux jagħmel ħsara."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Fittex"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Speċifika informazzjoni"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Tista' tipprovdi l-għażliet lill-modulu %s.\n"
-"L-għażliet għandhom il-format \"isem=valur isem=valur ...\".\n"
-"Per eżempju, \"io=0x300 irq=7\"."
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Għażliet tal-modulu:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Il-modulu %s ma rnexxielux jitla'.\n"
-"Trid terġa' tipprova b'parametri oħra?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "aċċess għall-programmi X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "aċċess għall-għodda rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "ippermetti \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "aċċess għall-fajls amministrattivi"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s diġà miżjud)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dan il-password sempliċi wisq"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Jekk jogħġbok agħti isem ta' user"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"L-isem tal-user jista' jkun fih biss ittri żgħar, numri, \"-\" u \"_\"."
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Dan l-isem ta' user diġà jeżisti"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Żid user"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Daħħal dettalji ta' user\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "AÄ‹Ä‹etta user"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Isem veru"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Isem tal-user"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Stampa"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Awto-login"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Nista' nissettja l-kompjuter biex awtomatikament jagħmel login fuq user "
-"wieħed.\n"
-"Trid tissettja din il-faċilità?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Agħżel il-user impliċitu:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Agħżel liema \"window manager\" trid tħaddem:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Agħżel liema lingwa trid tuża."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Tista' tagħżel lingwi oħra li jkun u disponibbli wara li tinstalla"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Kollha"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Ippermetti l-users kollha"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizzat"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ebda offerti (sharing)"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Irid jiġi nstallat il-pakkett %s. Tridni ninstallah?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Tista' toffri direttorji bl-NFS jew Samba. Liema trid?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Pakkett meħtieġ %s huwa nieqes"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Ikkanċella"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Ħaddem userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Id-direttorju offruti (file sharing) għall-users juża l-\n"
-"grupp \"fileshare\". Tista' tuża userdrake biex iżżid\n"
-"users ma' dan il-grupp."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bieb miftuħ beraħ!"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Ftit li xejn"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Tajjeb"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Tajjeb ħafna"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiku"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Oqgħod attent jekk tuża dan il-livell. Il-kompjuter tiegħek jista' ikun iżed "
-"faċli tużah, imma jkun vulnerabbli ħafna. Qatt m'għandu jintuża fuq "
-"kompjuter imqabbad ma' oħrajn permezz ta' network jew ma' l-internet. Ma "
-"hemm ebda password."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Il-passwords issa huma mixgħula, imma l-użu fuq l-internet jew network xorta "
-"m'hux rakkomandat."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dan huwa s-seting rakkomandat jekk se tuża dan il-kompjuter fuq l-internet "
-"bħala klijent."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Diġà hemm xi restrizzjonijiet, u iżjed testijiet awtomatiċi jitħaddmu kuljum "
-"bil-lejl."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"B'dan il-livell ta' sigurtà jsir possibbli li tuża dan il-kompjuter bħala "
-"server.\n"
-"Is-sigurtà hija għolja biżżejjed biex jintuża bħala server li jaċċetta "
-"konnessjonijiet\n"
-"minn ħafna kompjuters oħra. Jekk int se tuża l-kompjuter bħala klijent biss, "
-"jew biex taċċessa l-internet, jaqbillek livell iżjed baxx."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ibbażat fuq il-livell ta' qabel, imma issa s-sistema hija magħluqa għal "
-"kollox.\n"
-"Is-setinga tas-sigurtà qegħdin fil-massimu."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Agħżel livell ta' sigurtà"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Livell ta' sigurtà"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Uża libsafe għas-servers"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Din hija librerija li tipproteġi kontra attakki \"buffer overflow\" u "
-"\"fomat string\"."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Merhba ghal %s - ghazla ta' sistema operattiva\n"
-"\n"
-"Aghzel sistema operattiva mil-lista ta' fuq, jew\n"
-"stenna %d sekondi ghall-ghazla implicita\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Merhba ghal GRUB - ghazla ta' sistema operattiva"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uza l-buttuni %c u %c biex taghzel liema element huwa mmarkat."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Aghfas Enter biex tibda' s-sistema operattiva mmarkata, 'e' biex tbiddel"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "il-kmand qabel tibda', jew 'c' ghal linja ta' kmand."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "L-ghazla mmarkata se tinbeda' awtomatikament f' %d sekondi"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "M'hemmx biżżejjed spazju fuq /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ma tistax tinstalla l-bootloader fil-partizzjoni %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "għad m'hemmx għajnuna implementata.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfigurazzjoni ta' l-istil ta' boot"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fajl"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fajl/O_ħroġ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor NewStyle bil-kategoriji"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradizzjonali"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor tradizzjonali Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ħaddem Aurora mal-boot"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modalità lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modalità yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bħalissa qed tuża %s bħala BootManager.\n"
-"Klikkja \"ikkonfigura\"\" biex tħaddem il-konfiguratur."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Ikkonfigura"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modalità sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Ħaddem X-Windows malli titla'"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Le, ma rridx awto-login"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iva, rrid awto-login b'dan il-user u desktop"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Ma nistax niftaħ /etc/inittab għall-qari: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuti"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ma nistax nieħu ritratti tal-iskrin qabel toħloq il-partizzjonijiet"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ir-ritratti jkunu disponibbli wara l-installazzjoni f' %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Franza"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kosta Rika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belġju"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Repubblika Kżeka"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Ä ermanja"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Greċja"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norveġja"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Svezja"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Netherlands"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italja"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Awstrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Stati Uniti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Ħu \"backup\" tal-informazzjoni qabel tkompli"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Aqra sew!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jekk bi ħsiebek tuża aboot, kun ċert li tħalli spazju fil-bidu tad-diska "
-"(2048 setturi biżżejjed)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Problema"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Saħħar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Agħżel azzjoni"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Għandek partizzjoni waħda kbira FAT\n"
-"(ġeneralment użata minn Microsoft DOS/Windows).\n"
-"Nissuġġerixxi li l-ewwel iċċekken dik il-partizzjoni\n"
-"(klikkja fuqha, u agħfas \"ibdel daqs\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Jekk jogħġbok klikkja fuq partizzjoni"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Dettalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vojt"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Oħrajn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipi ta' filesystem"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Oħloq"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uża \"%s\" minnflok"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Ħassar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "L-ewwel agħfas \"żmonta\""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Jekk tibdel it-tip ta' partizzjoni %s, l-informazzjoni kollha li hemm fuqha "
-"tintilef"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Agħżel partizzjoni"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Agħżel partizzjoni oħra"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Oħroġ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Idħol f'modalità għal esperti"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Lura f'modalità normali"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Annulla"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Trid tkompli xorta?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Oħroġ minngħajr ma tikteb"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Trid toħroġ minngħajr ma tikteb it-tabella tal-partizzjonijiet?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Trid tikteb il-modifiki għal /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Awto-allokazzjoni"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Neħħi kollox"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informazzjoni dwar il-ħard disk"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Il-partizzjonijiet primarji kollha mimlijin"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ma nistax inżid iżjed partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Biex iżżid iżjed partizzjonijiet, trid tħassar waħda milli hemm biex tkun "
-"tista' toħloq partizzjoni estiża"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Ikteb it-tabella ta' partizzjonijet"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Erġa tella' tabella ta' partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Salva tabella ta' partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Erġa' aqra t-tabella ta' partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Awto-muntar ta' diski li jinħarġu"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Agħżel fajl"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Il-tabella tal-partizzjonijiet għall-backup m'għandiex l-istess daqs.\n"
-"Tkompli xorta?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Twissija"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Daħħal floppy fid-drive\n"
-"Kull ma hemm fuq il-floppy se jitħassar"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Qed nipprova nsalva t-tabella ta' partizzjonijiet"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informazzjoni dettaljata"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Post għall-immontar"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Għażliet"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ibdel daqs"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mexxi"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formattja"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Immonta"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Żid ma' RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Żid ma' LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Żmonta"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Neħħi mir-RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Neħħi mill-LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Biddel RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Uża bħala loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Oħloq partizzjoni ġdida"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Settur tal-bidu: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Daqs f' MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tip ta' filesystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punt ta' mmuntar: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferenzi: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Trid tneħħi l-fajl ta' loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Ibdel tip ta' partizzjoni"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Liema filesystem trid?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Qed nibdel minn ext2 għal ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Fejn trid timmonta l-fajl ta' loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Fejn trid timmonta d-diska %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ma nistax inneħħi l-punt ta' mmuntar għax din il-partizzjoni qed tintuża "
-"għal loopback.\n"
-"L-ewwel neħħiha minn loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Qed nikkalkula l-limiti tal-filesystem FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Qed nibdel id-daqs"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Din il-partizzjoni ma tistax tinbidel id-daqs tagħha"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"L-informazzjoni kollha fuq din il-partizzjoni għandha tiġi kkupjata fuq "
-"backup"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Wara li tibdel id-daqs tal-partizzjoni %s, l-informazzjoni kollha fuqha "
-"tintilef"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Agħżel id-daqs il-ġdid"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Daqs Ä¡did f'MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Fuq liema diska trid tmexxiha?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Settur"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Fuq liema settur trid tmexxiha?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Qed titmexxa"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Qed jitmexxa l-partizzjoni..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Agħżel RAID eżistenti biex iżżid miegħu"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "Ä¡did"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Agħżel LVM eżistenti biex iżżid miegħu"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Isem tal-LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Din il-partizzjoni ma tistax tintuża għal loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Isem ta' fajl għal loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Agħti isem ta' fajl"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Fajl diġà qed jintuża minn loopback ieħor, agħżel ieħor"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fajl diġà jeżisti. Tuża lilu?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Għażliet għall-immuntar"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Varji"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "apparat"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "livell"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "daqs ta' \"chunk\""
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Oqgħod attent: dan il-proċess huwa perikoluż."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "X'tip ta' partizzjoni?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jiddispjaċini, ma nistax noħloq /boot daqshekk 'il quddiem fid-diska (fuq "
-"Ä‹ilindru > 1024).\n"
-"Jekk tuża l-LILO din ma taħdimx, jekk ma tużax il-LILO ma jkollokx bżonn "
-"partizzjoni /boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Il-partizzjoni li għażilt bħala root (/) fiżikament qegħda fuq ċilindru wara "
-"l-1024 \n"
-"fuq id-diska, u m'għandekx partizzjoni /boot. Jekk se tuża l-bootmanager "
-"LILO, \n"
-"kun ċert li toħloq partizzjoni /boot, li tkun qabel ċilindru 1024."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Int għażilt partizzjoni software-RAID bħala root (/).\n"
-"Ebda bootloader m'hu kapaċi jħaddem dan mingħajr partizzjoni /boot.\n"
-"Għalhekk aċċerta li jkollok partizzjoni /boot mhux fuq ir-RAID."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "It-tabella tal-partizzjonijiet tad-diska %s se tinkiteb fuq id-diska."
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Trid tirributja sabiex il-bidliet ikollhom effett."
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Wara li tifformattja l-partizzjoni %s, l-informazzjoni kollha fuqha tintilef."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Qed nifformattja"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Qed nifformattja fajl ta' loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Qed nifformattja partizzjoni %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Aħbi fajls"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Mexxi fajls għal partizzjoni ġdida"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Id-direttorju %s diġà fih xi fajls\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Qed jitmexxew il-fajls għal partizzjoni ġdida"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Qed nikkopja %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Qed inneħħi %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partizzjoni %s issa magħrufa bħala %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Apparat: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ittra tad-diska fid-DOS: %s (probabbli)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Isem: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Bidu: settur %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Daqs: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s setturi"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "ÄŠilindri %d sa %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formattjat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Mhux formattjat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Immuntat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Fajl/s ta' loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partizzjoni li tibda' impliċitament\n"
-"    (għad-DOS/Windows, mhux għal-lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Livell %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Daqs ta' \"chunk\" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Diski RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Isem ta' fajl loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Aktarx, din il-partizzjoni\n"
-"hija partizzjoni ta' Driver,\n"
-"jaqbillek tħalliha kif inhi.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Din il-partizzjoni speċjali\n"
-"\"bootstrap\" qegħda biex\n"
-"tagħżel os meta tixgħel.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Daqs: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ä eometrija: %s Ä‹ilindri, %s heads, %s setturi\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Diski LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip ta' tabella tal-partizzjonijiet: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "fuq bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Għażliet: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Ċavetta taċ-ċifrazzjoni tal-filesystem (password)"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Agħżel ċavetta għaċ-ċifrazzjoni tal-filesystem"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Din iċ-ċavetta taċ-ċifrazzjoni huwa sempliċi wisq (irid ikun twil tal-inqas %"
-"d ittri)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Il-muftieħ taċ-ċifrar ma jaqbilx"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Ċavetta taċ-ċifrazzjoni"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Ċavetta taċ-ċifrazzjoni (darb' oħra)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Ibdel tip"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Jekk jogħġbok klikkja fuq mezz"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Fittex servers"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formattjar ta' %s falla"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ma nafx kif nifformattja %s b'tip %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck falla b'kodiċi %d jew sinjal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "problema fl-iżmuntar ta' %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "sempliċi"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "b' /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ma tistax tuża JFS għal partizzjonijiet iżgħar minn 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ma tistax tuża ReiserFS għal partizzjonijiet iżgħar minn 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Punti ta' mmuntar iridu jibdew b' /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Diġà hemm partizzjoni b'punt ta' mmuntar %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ma tistax tuża volum loġiku LVM għall-punt ta' mmuntar %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dan id-direttorju irid jibqa' fil-filesystem root."
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Għandek bżonn filesystem vera (ext2, reiserfs) għal dan il-punt ta' mmuntar\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ma tistax tuża filesystem iċċifrat għall-punt ta' mmuntar %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "M'hemmx biżżejjed spazju għal awto-allokazzjoni"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "M'hemm xejn x'nagħmel"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Problema waqt il-ftuħ ta' %s għall-kitba: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Instabet problema - ebda apparat validu ma nstab fejn jinħolqu filesystems "
-"ġodda. Iċċekkja l-kompjuter għall-kawża ta' din il-problema."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "M'għandek ebda partizzjoni!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux hija sistema operattiva \"multi-user\", u dan ifisser li l-users \n"
-"kollha jista' jkollhom il-preferenzi tagħhom, fajls personali eċċ. Tista'\n"
-"taqra l-\"User Guide\" għal iżjed tagħrif. Imma, kontra tal-user \"root\",\n"
-"li huwa l-amministratur, il-users li żżid hawn ma jkunu jistgħu jibdlu xejn\n"
-"ħlief il-fajls u konfigurazzjoni personali tagħhom. Inti trid toħloq ta' \n"
-"l-inqas user regolari wieħed għalik. Dan huwa l-user li bih għandek tagħmel\n"
-"ix-xogħol ta' kuljum. Filwaqt li jista' jkun iżed faċli tuża l-user \"root"
-"\" \n"
-"ta' kuljum, dan huwa perikoluż ħafna. L-iċken żball jista' jwaqqaf is-"
-"sistema\n"
-"milli taħdem. Jekk tagħmel anke żball serju b'user regolari, tista' titlef "
-"xi \n"
-"informazzjoni imma mhux is-sistema sħiħa.\n"
-"\n"
-"L-ewwel trid iddaħħal l-isem veru tiegħek. Dan mhux bilfors, ovvjament, u\n"
-"fil-fatt tista' ddaħħal li trid. DrakX imbgħad jieħu l-ewwel kelma u "
-"ipoġġiha\n"
-"fl-\"isem tal-user\". Dan huwa l-isem li jintuża biex tidħol fis-sistema. \n"
-"Tista' tibdel dan l-isem, imbgħad daħħal password. Filwaqt li l-password "
-"ta'\n"
-"user regolari mhux kruċjali daqs tar-root, dejjem jaqbillek tagħżel "
-"password\n"
-"tajjeb - ftakar li hemm il-fajls tiegħek fin-nofs.\n"
-"\n"
-"Jekk tagħfas \"Aċċetta user\", tista' żżid users oħra kemm hemm bżonn. "
-"Tista' żżid users għal ħutek, it-tfal jew ġenituri, jew lill-ħbieb, per "
-"eżempju. \n"
-"Meta tlesti milli żżid il-users kollha li trid, agħfas \"Lest@.\n"
-"\n"
-"Jekk tagħfas il-buttuna \"Avvanzat\", tkun tista' tbiddel ix-\"shell\" \n"
-"impliċita tal-user, li normalment tkun \"bash\"."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Hawn fuq issib il-partizzjonijiet ta' Linux li nstabu fuq id-diska. Tista' \n"
-"żżomm l-għażliet li għamel is-saħħar, huma tajbin għal ħafna każi.\n"
-"Jekk tagħmel tibdiliet, trid ta' l-inqas tiddefinixxi partizzjoni root (\"/"
-"\")\n"
-"Tagħżilx daqs żgħir wisq inkella ma tkunx tista' tinstalla l-programmi\n"
-"kollha li jkollok bżonn. Jekk tixtieq iżżomm l-informazzjoni fuq "
-"partizzjoni\n"
-"separata, trid toħloq ukoll partizzjoni għal \"/home\" (għal dan irid "
-"ikollok\n"
-"iżjed minn partizzjoni waħda Linux).\n"
-"\n"
-"Kull partizzjoni hija mniżżla b'dan il-mod: \"Isem\", \"Daqs\".\n"
-"\n"
-"L-isem huwa mqassam hekk: \"tip ta' diska\", \"numru ta' diska\", \"numru\n"
-"tal-partizzjoni\", per eżempju, \"hda1\". \n"
-"\n"
-"It-tip ta' diska huwa \"hd\" jekk id-diska hija tip IDE, u \"sd\" jekk "
-"hija \n"
-"tip SCSI.\n"
-"\n"
-"In-numru tad-diska huwa l-ittra ta' wara \"hd\" jew \"sd\". Għal diski IDE,\n"
-"\"a\" hija d-diska \"master\" fuq il-kontrollatur IDE primarju,\n"
-"\"b\" hija d-diska skjav fuq il-kontrollatur IDE primarju,\n"
-"\"c\" hija d-diska \"master\" fuq il-kontrollatur IDE sekondarju,\n"
-"\"d\" hija d-diska skjav fuq il-kontrollatur IDE sekondarju\n"
-"\n"
-"Fuq diski SCSI, \"a\" hija d-diska bl-iżjed ID baxx, \"b\" hija t-tieni, eċċ."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"L-installazzjoni ta' Mandrake Linux hija maqsuma fuq diversi CD-ROMs. DrakX\n"
-"jaf jekk pakkett partikulari hux qiegħed fuq CD-ROM oħra u jiftaħ is-CD u \n"
-"jindikalek biex iddaħħal li jmiss skond il-ħtieġa."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Issa wasal il-mument fejn tagħżel liema programmi tixtieq tinstalla fuq\n"
-"is-sistema tiegħek. Hemm eluf ta' pakketti disponibbli għal Mandrake Linux,\n"
-"u m'għandekx għalfejn tkun tafhom kollha.\n"
-"\n"
-"Jekk se tagħmel installazzjoni standard mis-CD-ROM, l-ewwel tiġi mistoqsi\n"
-"liema CDs għandek (modalità esperta biss). Iċċekkja t-tikketti tas-CDs u \n"
-"immarka l-kaxex li jikkorrispondu għas-CDs li għandek. Klikkja \"Ok\" meta\n"
-"tkun lest biex tkompli.\n"
-"\n"
-"Il-pakketti huma mqassma fi gruppi li jikkorrespondu għat-tip ta' użu tal-\n"
-"kompjuter. Il-gruppi stess huma mqassma f'erba' sezzjonijiet:\n"
-"\n"
-" * \"Workstation\": jekk fi ħsiebek tuża l-kompjuter bħala workstation, \n"
-"agħżel wieħed jew iżjed mill-gruppi li tixtieq.\n"
-"\n"
-"\n"
-" * \"Żviluppar\": jekk tixtieq tuża l-kompjuter biex tipprogramma, agħżel\n"
-"il-gruppi li trid.\n"
-" * \"Server\": jekk il-kompjuter huwa intenzjonat bħala server. tista' "
-"tagħżel\n"
-"l-iżjed servizzi komuni li tixtieq tinstalla fuq il-magna.\n"
-"\n"
-" * \"Ambjent Grafiku\": finalment, dan huwa fejn tagħżel l-ambjent grafiku "
-"li\n"
-"tippreferi. Ta' l-inqas trid tagħżel wieħed minn dawn jekk trid li jkollok \n"
-"ambjent grafiku.\n"
-"\n"
-"Jekk tmexxi l-maws fuq wieħed mill-ismijiet tara deskrizzjoni qasira dwar "
-"dak\n"
-"il-grupp. Jekk tneħħi l-gruppi kollha meta qed tagħmel installazzjoni "
-"regolari\n"
-"(mhux aġġornament), titla' window fejn tista' tagħżel tip ta' "
-"installazzjoni \n"
-"minima:\n"
-"\n"
-"\" * \"Bl-XWindows\" tinstalla s-sistema bażika flimkien ma' l-minimu ta'\n"
-"pakketti għal sistema grafika;\n"
-"\n"
-" * \"B'dokumentazzjoni bażika\" tinstalla s-sistema bażika flimkiem ma' xi\n"
-"programmi sempliċi u d-dokumentazzjoni tagħhom. Dan huwa tajjeb għal "
-"server.\n"
-"\n"
-" * \"Installazzjoni vera minima\" tinstalla strettament l-inqas pakketti \n"
-"possibbli sabiex ikollok Linux b'linja ta' kmand. Din l-installazzjoni "
-"tieħu\n"
-"biss madwar 65MB.\n"
-"\n"
-"Tista' tittikkja \"Għażla ta' pakketti individwali\", li huwa utli jekk int\n"
-"familjari mal-pakketti offruti jew jekk tixtieq kontroll assolut fuq liema \n"
-"pakketti jiġu nstallati.\n"
-"\n"
-"Jekk bdejt l-installazzjoni fil-modalità \"Aġġorna\", tista' tneħħi l-"
-"pakketti\n"
-"kollha sabiex ma jiġu installati ebda pakketti fuq li hemm. Dan huwa utli\n"
-"biex issewwi jew taġġorna sistema eżistenti."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalment, skond jekk għażiltx li tagħżel il-pakketti individwalment, tiġi\n"
-"offruta lista tal-pakketti kollha klassifikati fi gruppi. Waqt li qed "
-"tifli \n"
-"din il-lista, tista' tagħżel gruppi sħaħ jew pakketti individwali.\n"
-"\n"
-"Meta tagħżel pakkett fil-lista, tidher deskrizzjoni maġenbha fuq il-lemin.\n"
-"X'ħin tlesti mill-għażla, klikkja l-buttuna \"Installa\" sabiex tibda' l-\n"
-"proċess ta' installazzjoni. Skond is-saħħa tal-kompjuter u n-numru ta'\n"
-"pakketti li għażilt, jista' jieħu ftit tal-ħin sakemm jiġu installati l-\n"
-"pakketti kollha. Il-ħin totali jiġi stmat u jintwera fuq l-iskrin biex "
-"jgħinek\n"
-"tiddeċiedi għandekx ħin tagħmel kikkra kafè.\n"
-"\n"
-"!! Jekk pakkett ta' server jiġi installat intenzjonalment jew għax jifforma\n"
-"parti minn grupp, int tintalab tikkonferma jekk verament tridx lill dawn\n"
-"is-servizzi jiġu installati. Fil-Mandrake Linux, is-servizzi li tinstalla "
-"jiġu\n"
-"mtella' awtomatikament meta tixgħel. Għalkemm dawn kienu sikuri u ma fihom\n"
-"ebda problemi meta din il-verżjoni ta' Linux inħarġet, jista' jkun li "
-"jinstabu\n"
-"problemi simili wara li ġiet finalizzata din il-verżjoni. Jekk ma tafx \n"
-"x'suppost jagħmel servizz partikulari jew għaliex qed jiġi nstallat, agħżel\n"
-"\"Le\". Jekk tagħfas \"Iva\" dawn is-servizzi jiġu nstallati u jiġu "
-"mtella' \n"
-"awtomatikament fil-bidu.\n"
-"\n"
-"L-għażla \"Dipendenzi awtomatiċi\" sempliċiment titfi l-window li twissik\n"
-"kull meta l-installazzjoni tkun se żżid xi pakketti oħra meħtieġa. Dan "
-"jiġri\n"
-"għax il-programm ikun induna li jinħtieġ pakkett ieħor biex il-programmi li\n"
-"tkun għażilt jaħdmu sew.\n"
-"\n"
-"L-istampa ta' \"floppy disk\" żgħira fil-qiegħ tippermettilek li ttella' l-\n"
-"lista ta' pakketti li ġew magħżula waqt installazzjoni preċedenti. Jekk \n"
-"tikklikkja din l-ikona int tintalab iddaħħal floppy li tkun ħloqt waqt \n"
-"installazzjoni oħra. Ara t-tieni ħjiel fl-aħħar stadju biex tara kif toħloq\n"
-"diska simili."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Issa jmiss li tissettja l-konnessjoni mal-internet/network. Jekk trid "
-"tqabbad\n"
-"il-kompjuter mal-internet jew ma' network lokali, klikkja \"OK\" biex "
-"tħaddem\n"
-"programm li jsib u jikkonfigura l-apparat meħtieġ. Jekk dan il-programm ma \n"
-"jsibx l-apparat meħtieġ, neħħi l-marka minn \"awto-għarfien\" qabel terġa'\n"
-"tipprova. Tista' wkoll tagħżel li ma nikkonfigurax in-network, jew li "
-"tissettjah\n"
-"iżjed tard; f'dan il-każ sempliċiment agħfas il-buttuna \"Ikkanċella\".\n"
-"\n"
-"It-tipi ta' konnessjoni disponibbli huma: modem tradizzjonali, modem ISDN,\n"
-"konnessjoni ADSL, modem cable, kif ukoll konnessjoni sempliċi LAN "
-"(Ethernet).\n"
-"\n"
-"Hawnhekk mhux se nidħlu fid-dettall ta' kull tip ta' konfigurazzjoni. \n"
-"Sempliċiment aċċerta li għandek il-parametri kollha minngħand l-ISP jew\n"
-"amministratur tas-sistema tiegħek.\n"
-"\n"
-"Tista' tikkonsulta l-kapitlu fil-manwal dwar il-konnessjonijiet tal-"
-"internet\n"
-"għal iżjed tagħrif, jew inkella installa l-kumplament tas-sistema imbgħad\n"
-"uża l-programm imsemmi f'dan il-manwal biex tissettja l-konnessjoni.\n"
-"\n"
-"Jekk tixtieq tikkonfigura n-network iżjed tard, jew jekk lest mill-\n"
-"konfigurazzjoni, klikkja \"Ikkanċella\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Hawnhekk tista' tagħżel liema servizzi tixtieq ittella' mal-bidu,\n"
-"\n"
-"Dawn huma s-servizzi kollha disponibbli mal-konfigurazzjoni kurrenti.\n"
-"Iċċekkjahom sew u neħħi dawk li m'għandekx bżonn kull darba li titla'\n"
-"s-sistema.\n"
-"\n"
-"!! F'dan l-istadju, oqgħod attent jekk tixtieq tuża l-kompjuter bħala "
-"server:\n"
-"aktarx ma jkollokx bżonn ittella' servizzi li m'intix se tuża. Ftakar li xi\n"
-"servizzi jistgħu ikunu perikolużi fuq server. Bħala regola ġenerali, ħalli\n"
-"biss dawk is-servizzi li verament għandek bżpnn.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux jimmaniġġja l-ħin bħala GMT (Greenwich Mean Time) u jaqiblu "
-"għall-\n"
-"ħin lokali skond iż-żona orarja li tagħżel. Huwa possibbli però li titfi "
-"din\n"
-"il-faċilità billi titfi l-għażla \"Arloġġ tas-sistema huwa GMT\" biex il-"
-"ħin\n"
-"tal-kompjuter jiġi l-istess bħall-ħin tas-sistema. Dan huwa utli jekk il-\n"
-"kompjuter tintuża għal sistemi operattivi bħall-Windows.\n"
-"\n"
-"L-għażla \"Sinkronizzazzjoni tal-ħin awtomatika\" tħallik awtomatikament \n"
-"tirregola l-ħin billi taqbad ma' server speċjali fuq l-internet. Fil-lista\n"
-"li tiġi preżentata, agħżel server viċin tiegħek. Ovvjament irid ikollok\n"
-"konnessjoni mal-internet issettjata biex tuża din il-faċilità. Jekk tuża\n"
-"din l-għażla jiġi nstallat programm apposta fuq il-kompjuter li "
-"jippermettilu\n"
-"li jintuża bħala server tal-ħin għal kompjuters oħra fuq in-network lokali."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (Sistema X Windows) huwa l-qalb tal-interfaċċja grafika GNU/Linux, u fuqu\n"
-"jaħdmu l-ambjenti jew desktops grafiċi kollha (KDE, Gnome, AfterStep,\n"
-"WindowMaker eċċ) li huma nklużi ma' Mandrake Linux. F'dan il-pass, DrakX\n"
-"jipprova jissettja l-X awtomatikament.\n"
-"\n"
-"Huwa rari li dan il-proċess ifalli, sakemm m'għandekx apparat antik ħafna\n"
-"(jew ġdid ħafna). Jekk jirnexxi, huwa awtomatikament jibda' lill X bl-aħjar\n"
-"reżoluzzjoni possibbli skond id-daqs tal-iskrin, u tintwera window biex\n"
-"tikkonferma jekk tistax taraha sew.\n"
-"\n"
-"Jekk qed tuża installazzjoni \"Espert\", int tidħol fis-saħħar ta' \n"
-"konfigurazzjoni X. Ara s-sezzjoni korrispondenti fil-manwal għal iżjed\n"
-"tagħrif.\n"
-"\n"
-"Jekk tista' tara l-messaġġ tajjeb f'dan it-test u tagħżel \"Iva\", DrakX "
-"jimxi\n"
-"għall-pass li jmiss. Jekk ma tarax il-messaġġ, dan sempliċiment ifisser li \n"
-"l-konfigurazzjoni hija ħażina, u t-test joħroġ waħdu wara 10 sekondi u\n"
-"jirrestawra l-iskrin."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"L-ewwel darba li tipprova l-konfigurazzjoni X, tista' ma tkunx sodisfatt\n"
-"bid-dehra (skrin żgħir wisq, mitfugħ wisq lejn ix-xellug/lemin...). "
-"Għalhekk,\n"
-"anke jekk X jaħdem sew, DrakX jistaqsik jekk il-konfigurazzjoni togħġbokx.\n"
-"Huwa jistaqsik jekk tixtieq tibdel xi ħaġa billi jurik lista ta' "
-"modalitajiet\n"
-"differenti li seta' jsib, u jitolbok tagħżel waħda.\n"
-"\n"
-"Bħala possibbiltà ta' aħħar, jekk ma rnexxielekx tħaddem X, agħżel \"Ibdel\n"
-"il-kard grafika\", agħżel \"Kard mhux imniżżla\" u meta tiġi mistoqsi liema\n"
-"server trid, agħżel \"FBDev\". Din hija għażla ġenerika ħafna li għandha \n"
-"taħdem mal-kards grafiċi moderni kollha. Agħżel \"Erġa' pprova\" biex tkun \n"
-"żgur."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalment, tiġi mistoqsi jekk tridx l-interfaċċja grafika mill-bidu.\n"
-"Innota li din il-mistoqsija tiġi preżentata anke jekk ma ttestjajtx il-\n"
-"konfigurazzjoni. Ovvjament, jaqbillek tagħżel \"Le\" jekk il-kompjuter se\n"
-"jintuża biss bħala server, jew jekk ma rnexxielekx tissettja l-X sew."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Is-CD tal-Mandrake Linux għandu modalità biex tirkupra sistema. Tista' \n"
-"taċċessaha billi tibda' l-kompjuter minn fuq l-ewwel CD, tagħfas \"F1\" "
-"x'ħin\n"
-"titla', u mbgħad tittajpja \"rescue\" fil-prompt. Imma, f'każ li l-"
-"kompjuter\n"
-"ma jistax jitħaddem mis-CDROM, int jista' jkollok bżonn dan il-pass ta' \n"
-"l-inqas f'żewġ sitwazzjonijiet:\n"
-"\n"
-" * Meta tinstalla l-bootloader, DrakX jikteb is-settur \"boot\" (MBR) tad-\n"
-"diska prinċipali (sakemm m'intix qed tuża bootloader ieħor) sabiex tkun "
-"tista'\n"
-"tagħżel lil-Linux jew Windows x'ħin tixgħel (jekk għandek il-Windows \n"
-"installat). Jekk xi darba jkollok terġa' tinstalla l-Windows, dan iħassar "
-"din\n"
-"l-informazzjoni, u ma tkunx tista' ttella' l-GNU/Linux.\n"
-"\n"
-" * Jekk tinħoloq xi problema li ma tħallix lill-GNU/Linux jitla' mid-diska.\n"
-"din il-floppy disk tista' tkun l-uniku mezz biex ittella' l-GNU/Linux. Fid-\n"
-"diska hemm numru raġonevoli ta' programmi biex jgħinuk terġa' tirrestawra\n"
-"sistema li kraxxjat minħabba li jmur id-dawl, żbalji li jsiru, jew "
-"raġunijiet\n"
-"oħra.\n"
-"\n"
-"Meta tikklikkja dan il-pass, int tiġi mitlub iddaħħal diska fid-drive. Il-\n"
-"floppy li ddaħħal trid tkun vojta, jew ikun fiha informazzjoni li tista' \n"
-"tħassar. M'għandekx bżonn tifformattjaha minn qabel għax DrakX se "
-"jħassarha \n"
-"kollha."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"F'dan il-punt int trid tagħżel fejn, fuq il-ħard disk, trid tinstalla s-\n"
-"sistema operattiva Mandrake Linux. Jekk il-ħard disk huwa vojt, jew jekk\n"
-"hemm sistema operattiva qed tokkupaha kollha, l-ewwel trid toħloq \n"
-"partizzjonijiet. Bażikament, il-partizzjonijiet tal-ħard disk jaqsmu d-"
-"diska\n"
-"f'partijiet biex ikun hemm sezzjonijiet fejn tiġi nstallata s-sistema ġdida\n"
-"Mandrake Linux.\n"
-"\n"
-"Peress li l-effett ta' partizzjonament tal-ħard disk m'humiex riversibbli,\n"
-"dan il-proċess jista' jidher intimidanti jekk m'għandekx esperjenza. \n"
-"Fortunatament, hemm \"saħħar\" li jissimplifika l-proċess kollu. Qabel "
-"tibda',\n"
-"ikkonsulta l-manwal u ħu l-ħin tiegħek.\n"
-"\n"
-"Jekk qed tħaddem l-installazzjoni fil-\"Modalità esperta\", int tidħol f'\n"
-"DiskDrake, programm tal-Mandrake għall-partizzjonament tal-ħard disk, li\n"
-"jħallik tirfina l-allokazzjoni tad-diska. Mill-interfaċċja tal-"
-"installazzjoni.,\n"
-"tista' tuża s-saħħar kif deskritt hawn billi tagħfas il-buttuna \"Saħħar\".\n"
-"\n"
-"Jekk diġà huma definiti xi partizzjonijiet, jew minn installazzjoni "
-"preċedenti\n"
-"jew minn xi programm ieħor, tista' tagħżel dawn biex tinstalla fuqhom.\n"
-"\n"
-"Jekk m'hemm ebda partizzjonijiet definiti, trid toħloqhom permezz tas-"
-"saħħar.\n"
-"Skond il-konfigurazzjoni tal-ħard disk, diversi għażliet huma disponibbli:\n"
-"\n"
-" * \"Uża spazju vojt\": Din l-għażla toħloq partizzjonijiet awtomatikament.\n"
-"M'għandek bżonn tagħmel xejn iżjed..\n"
-"\n"
-" * \"Uża partizzjoni eżistenti\": Is-saħħar sab partizzjoni waħda jew iżjed\n"
-"tal-Linux fuq il-ħard disk. Jekk trid tuża lilhom, agħżel din.\n"
-"\n"
-" * \"Uża spazju vojt fuq partizzjoni Windows\": Jekk għandek Microsoft "
-"Windows\n"
-"installat fuq il-ħard disk u qed jokkupa l-ispazju kollu, trid toħloq ftit \n"
-"spasju għal-Linux. Biex tagħmel dan, trid jew tħassar il-partizzjoni "
-"Windows\n"
-"u kull m'hemm fiha (ara \"Ħassar id-diska sħiħa\" jew \"Modalità esperta"
-"\"), \n"
-"jew iċċekken il-partizzjoni Windows. Tista' ċċekken il-partizzjoni Windows \n"
-"mingħajr ma titlef informazzjoni. Din is-soluzzjoni hija rakkomandata biex "
-"tuża \n"
-"l-Windows u l-Linux flimkien fuq l-istess kompjuter.\n"
-"\n"
-"   Qabel tagħżel din l-għażla, kun af li wara din il-proċedura, il-"
-"partizzjoni\n"
-"tal-Windows tkun iżgħar milli hi bħalissa. Ikollok inqas spazju taħt il-\n"
-"Microsoft Windows fejn iżżomm informazzjoni jew tinstalla programmi ġodda.\n"
-"\n"
-" * \"Ħassar id-diska sħiħa\": Jekk tixtieq tħassar l-informazzjoni kollha u\n"
-"l-partizzjonijiet kollha li għandek fuq il-ħard disk u tpoġġi l-Mandrake "
-"Linux\n"
-"minnflokhom, tista' tagħżel din. Oqgħod attent minn din l-għażla għax ma "
-"tkunx\n"
-"tista' tibdel fehemtek wara li tikkonferma.\n"
-"\n"
-"   !! Jekk tagħżel din l-għażla, kull m'hemm fuq id-diska jintilef !!\n"
-"\n"
-" * \"Modalità esperta\": Agħżel dan jekk trid tippartizzjona l-ħard disk \n"
-"manwalment. Oqgħod attent - hija għażla li tagħti kontroll imma hija "
-"perikoluża.\n"
-"Tista' faċilment titlef l-informazzjoni kollha b'dan il-mod. Għalhekk, tużax "
-"din\n"
-"l-għażla jekk ma tafx x'qed tagħmel."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Dak kollox! L-installazzjoni issa hija lesta u s-sistema GNU/Linux issa\n"
-"lesta biex tintuża. Agħfas \"OK\" biex tirristartja l-kompjuter. Tista'\n"
-"tagħżel GNU/Linux jew Windows, skond x'tippreferi (jekk għandek it-tnejn\n"
-"installati) malli jerġa' jixgħel il-kompjuter.\n"
-"\n"
-"Il-buttuna \"Avvanzat\" (f'modalità esperta biss) turik żewġ buttuni oħra:\n"
-"\n"
-" * \"oħloq floppy awto-installa\": toħloqlok floppy li tippermettilek \n"
-"tirrepeti l-istess installazzjoni fuq kompjuter ieħor identiku, mingħajr\n"
-"l-intervent tiegħek.\n"
-"\n"
-"   Innota li meta tagħfas din il-buttuna jintwerew żewġ għażliet oħra:\n"
-"\n"
-"    * \"Replay\". Din hija installazzjoni semi-awtomatika, għax il-pass ta'\n"
-"partizzjonament (u dak biss) jibqa' manwali.\n"
-"\n"
-"    * \"Awtomatiku\". Installazzjoni totalment awtomatika - il-ħard disk\n"
-"titħassar u tinkiteb mill-ġdid, u kull informazzjoni fuqha tintilef.\n"
-"\n"
-"   Din il-faċilità hija utli meta qed tinstalla numru kbir ta' kompjuters\n"
-"identiċi. Ara s-sezzjoni \"Auto install\" fuq il-web site tagħna.\n"
-"\n"
-"  * \"Ikteb l-għażla ta' pakketti\"(*): jikteb l-għażla ta' pekketti li\n"
-"nstallajt. Meta qed tagħmel installazzjoni oħra, daħħal il-floppy fid-drive\n"
-"u meta tibda l-installazzjoni, agħfas [F1] u ħaddem l-installazzjoni "
-"permezz\n"
-"tal-kmand >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Għandek bżonn floppy formattjata FAT (DOS). Biex toħloq waħda mil-"
-"Linux,\n"
-"ittajpja \"mformat a:\"."
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Partizzjonijiet li ġew definiti ġodda jridu jiġu formattjati biex\n"
-"jintużaw (formattjati jfisser li tinħoloq \"filesystem\")\n"
-"\n"
-"F'dan il-punt tista' tagħżel li terġa' tifformattja partizzjonijiet\n"
-"eżistenti biex tħassar li kien hemm fuqhom. Jekk tixtieq tagħmel hekk,\n"
-"agħżel dawk il-partizzjonijiet ukoll.\n"
-"\n"
-"Innota li mhux meħtieġ li terġa' tifformattja l-partizzjonijiet kollha\n"
-"eżistenti. Trid però tifformattja dawk il-partizzjonijiet li jkollhom is-\n"
-"sistema operattiva fuqhom (eż, \"/\", \"/usr\" jew \"/opt\"), imma "
-"m'għandekx\n"
-"bżonn tifformattja dawk li fihom l-informazzjoni tiegħek (tipikament \"/home"
-"\").\n"
-"\n"
-"Oqgħod attent meta tagħżel il-partizzjonijiet. Wara li jiġu formattjati,\n"
-"l-informazzjoni kollha li kien hemm fuqhom tintilef u m'hemmx mod biex "
-"iġġibhom\n"
-"lura.\n"
-"\n"
-"Agħfas \"OK\" meta tkun lest biex tifformattja l-partizzjonijiet.\n"
-"\n"
-"Agħfas \"Ikkanċella\" jekk trid tagħżel partizzjoni oħra għas-sistema ġdida\n"
-"Mandrake Linux.\n"
-"\n"
-"Agħfas \"Avvanzat\" biex tagħżel partizzjonijiet biex jiġu ċċekkjati għal "
-"blokki\n"
-"ħżiena fuq id-diska."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Is-sistema operattiva Mandrake Linux issa qed tiġi installata.\n"
-"Skond in-numru ta' pakketti li għażilt, u s-saħħa tal-kompjuter, dan il-\n"
-"proċess jista' jdum bejn ftit minuti u ħin konsiderevoli.\n"
-"\n"
-"Jekk jogħġbok stenna sakemm ilesti."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Fid-data meta tinstalla l-Mandrake Linux, aktarx ikunu ġew aġġornati xi\n"
-"pakketti minn meta ġiet pubblikata. Xi żbalji jistgħu ikunu ġew irranġati,\n"
-"u problemi ta' sigurtà ġew riżolti. Sabiex tibbenifika minn dawn l-\n"
-"aġġornamenti, jaqbillek tniżżilhom minn fuq l-internet. Agħżel \"Iva\" jekk\n"
-"għandek konnessjoni mal-internet issettjata, jew \"Le\" jekk tippreferi li\n"
-"tinstalla l-aġġornamenti iżjed tard.\n"
-"\n"
-"Jekk tagħżel iva, tintwera lista ta' postijiet minn fejn l-aġġornamenti \n"
-"jistgħu jitniżżlu (\"mirja\"). Agħżel l-iżjed wieħed viċin tiegħek. Imbgħad\n"
-"tintwera lista ta' pakketti. Dur dawn il-pakketti, agħżel liema trid u \n"
-"agħfas \"Installa\" biex tniżżilhom u tinstallahom jew \"Ikkanċella\" biex "
-"twaqqaf."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Qabel tkompli int mitlub taqra sew it-termini ta' din il-liċenzja. Hija\n"
-"kopri d-distribuzzjoni sħiħa ta' Mandrake Linux. Jekk ma taqbilx ma' t-"
-"termini\n"
-"kollha tagħha, klikkja l-buttuna \"Ma naċċettax\", u l-installazzjoni "
-"tieqaf \n"
-"minnufih. Biex tkompli bl-installazzjoni, agħfas il-buttuna \"Naċċetta\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"F'dan il-punt, trid tagħżel livell ta' sigurtà għal dan il-kompjuter.\n"
-"Bħala regola ġenerali, iżjed m'hu espost il-kompjuter, u iżjed m'hi "
-"kruċjali\n"
-"l-informazzjoni ta' fuqu, iżjed irid ikun għoli l-livell ta' sigurtà. Innota "
-"li\n"
-"livell ta' sigurtà iżjed għoli jfisser iżjed diffikultà fl-użu. Irreferi \n"
-"għall-kapitlu MSEC fil-Manwal ta' Referenza għat-tifsira ta' dawn il-"
-"livelli.\n"
-"\n"
-"Jekk ma tafx liema tagħżel, żomm l-għażla impliċita."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"F'dan il-punt trid tagħżel liema partizzjoni/jiet se jintużaw għall-\n"
-"installazzoni tas-sistema Mandrake Linux. Jekk diġà ġew definiti xi\n"
-"partizzjonijiet, minn installazzjoni preċedenti ta' GNU/Linux jew minn\n"
-"għodda ta' partizzjonament oħra, tista' tuża l-partizzjonijiet eżistenti.\n"
-"Altrimenti, l-partizzjonijiet tal-ħard disk iridu jiġu definiti.\n"
-"\n"
-"Biex toħloq il-partizzjonijiet, l-ewwel trid tagħżel ħard disk.\n"
-"Tista' tagħżel diska għall-partizzjonament billi tagħżel \"hda\" għal l-\n"
-"ewwel diska IDE, \"hdb\" għat-tieni, eċċ, jew \"sda\" għal l-ewwel\n"
-"diska SCSI, eċċ.\n"
-"\n"
-"Biex tippartizzjona l-ħard disk magħżula għandek dawn l-għażliet:\n"
-"\n"
-" * \"Ħassar kollox\": din l-għażla tħassar il-partizzjonijiet kollha\n"
-"mill-ħard disk magħżula.\n"
-"\n"
-" * \"Awto allokazzjoni\": din l-għażla awtomatikament toħloqlok "
-"partizzjonijiet\n"
-"Ext2 u swap fl-ispazju vojt tad-diska.\n"
-"\n"
-" * \"Iżjed\" jagħtik aċċess għal iżjed faċilitajiet:\n"
-"\n"
-"    * \"Ikteb tabella tal-partizzjonijiet\": jikteb it-tabella \n"
-"tal-partizzjonijiet fuq floppy. Utli biex tirkupra t-tabella iżjed tard "
-"jekk\n"
-"hemm bżonn. Dan il-pass huwa rakkomandat.\n"
-"\n"
-"    * \"Irrestawra t-tabella tal-partizzjonijet\": tħallik tirrestawra t-\n"
-"tabella tal-partizzjonijiet minn floppy disk fejn Ä¡ew miktuba.\n"
-"\n"
-"    * \"Salva tabella tal-partizzjonijiet\": jekk it-tabella tal-"
-"partizzjonijiet\n"
-"ġiet korrotta b'xi mod, din l-għażla tħallik tipprova terġa' tirkupraha. \n"
-"Oqgħod attent b'din l-għażla u ftakar li tista' tfalli.\n"
-"\n"
-"    * \"Erġa' aqra' t-tabella\": jinsa l-bidliet kollha u jerġa' jaqra t-"
-"tabella\n"
-"mill-ħard disk.\n"
-"\n"
-"    * \"awto-muntar ta' media tinħareġ\": jekk tneħħi din l-għażla l-users\n"
-"ikollhom jimmuntaw u jiżmuntaw manwalment diski li jinħarġu bħal floppy u "
-"CDROM.\n"
-"\n"
-" * \"Saħħar\": uża dan il-metodu jekk ma tafx sew kif tagħmel il-\n"
-"partizzjonijiet int.\n"
-"\n"
-" * \"Annulla\": uża din l-għażla biex tikkanċella l-għażliet li għamilt.\n"
-"\n"
-" * \"Aqleb modalità normali/esperta\": jagħtik iżjed azzjonijiet fuq il-\n"
-"partizzjonijiet (tip, għażliet, format) u jagħti iżjed dettalji.\n"
-"\n"
-" * \"Lest\": meta tlesti mill-partizzjonament, dan jikteb il-bidliet li\n"
-"għamilt lid-diska.\n"
-"\n"
-"Nota: tista' tilħaq kull għażla mit-tastiera. Dur il-partizzjonijiet bit-"
-"TAB\n"
-"u l-vleġeġ 'il fuq u 'l isfel.\n"
-"\n"
-"Meta tkun fuq il-partizzjoni li trid, tista tuża:\n"
-"\n"
-" * Ctrl-C biex toħloq partizzjoni (meta l-partizzjoni vojta tkun magħżula)\n"
-"\n"
-" * Ctrl-D biex tħassar partizzjoni\n"
-"\n"
-" * Ctrl-M biex tissettja l-punt ta' mmuntar.\n"
-"\n"
-"Biex tikseb iżjed informazzjoni dwar il-filesystems differenti disponibbli,\n"
-"jekk jogħġbok aqra l-kapitlu ext2fs fil-Manwal ta' Referenza.\n"
-"\n"
-"Jekk qed tinstalla fuq kompjuter PPC, tkun trid toħloq partizzjoni żgħira\n"
-"HFS \"bootstrap\", ta' l-inqas 1MB, li tintuża mill-bootloader yaboot. Jekk\n"
-"tiddeċiedi li tagħmlu ftit ikbar, ngħidu aħna 50MB, tista' ssibu post utli\n"
-"fejn tqiegħed kernel u ramdisk \"spare\" għal emerġenzi."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Instabu iżjed minn partizzjoni waħda tal-Windows fuq il-ħard disk. Jekk \n"
-"jogħġbok agħżel liema minnhom trid iċċekken biex tinstalla s-sistema \n"
-"operattiva Linux.\n"
-"\n"
-"Kull partizzjoni hija mmarkata hekk: \"Isem tal-Linux\", \"Isem fil-Windows"
-"\",\n"
-"\"Daqs\".\n"
-"\n"
-"L-isem tal-Linux huwa mqassam hekk: \"tip ta' diska\", \"numru ta' diska"
-"\", \n"
-"\"numru tal-partizzjoni\", per eżempju, \"hda1\". \n"
-"\n"
-"It-tip ta' diska huwa \"hd\" jekk id-diska hija tip IDE, u \"sd\" jekk "
-"hija \n"
-"tip SCSI.\n"
-"\n"
-"In-numru tad-diska huwa l-ittra ta' wara \"hd\" jew \"sd\". Għal diski IDE:\n"
-"\n"
-" * \"a\" hija d-diska \"master\" fuq il-kontrollatur IDE primarju,\n"
-"\n"
-" * \"b\" hija d-diska skjav fuq il-kontrollatur IDE primarju,\n"
-"\n"
-" * \"c\" hija d-diska \"master\" fuq il-kontrollatur IDE sekondarju,\n"
-"\n"
-" * \"d\" hija d-diska skjav fuq il-kontrollatur IDE sekondarju\n"
-"\n"
-"Fuq diski SCSI, \"a\" hija d-diska bl-iżjed ID baxx, \"b\" hija t-tieni, "
-"eċċ.\n"
-"\n"
-"\"Isem tal-Windows\" huwa l-ittra li jkollha din il-ħard disk taħt il-"
-"Windows\n"
-"(l-ewwel diska jew partizzjoni hija \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Jekk jogħġbok stenna ftit. Dan il-proċess jista' jieħu diversi minuti."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX issa għandu bżonn ikun jaf jekk tridx tagħmel installazzjoni standard "
-"(\"Rakkomandata\") jew waħda li tagħtik iżjed kontroll fuq x'jiġri \n"
-"(\"Espert\"). Għandek ukoll l-għażla jekk tridx installazzjoni ġdida\n"
-"jew aġġornament ta' sistema eżistenti Mandrake Linux:\n"
-"\n"
-" * \"Installa\": Kompletament iħassar is-sistema l-antika. Fil-fatt, skond\n"
-"kif inhi mqassma s-sistema eżistenti, tista' żżomm xi partizzjonijiet\n"
-"mill-antiki kif inhuma.\n"
-"\n"
-" * \"Aġġorna\" Din il-klassi ta' installazzjoni tippermettilek taġġorna\n"
-"l-pakketti li għandek installati fuq il-Mandrake Linux. Hija żżomm il-\n"
-"partizzjonijiet preżenti tal-ħard disk kif ukoll il-konfigurazzjoni tal-\n"
-"users. Il-passi l-oħrajn tal-konfigurazzjoni jibqgħu aċċessibbli bħal \n"
-"installazzjoni normali.\n"
-"\n"
-" * \"Aġġorna pakketti biss\" Din il-klassi ġdida tippermetti li taġġorna\n"
-"l-pakketti ta' sistema eżistenti filwaqt li żżomm il-konfigurazzjoni "
-"eżistenti\n"
-"mhux mimsusa. Tkun tista' wkoll iżżid pakketti ġodda mal-installazzjoni.\n"
-"\n"
-"L-aġġornamenti għandhom jaħdmu fuq sistemi Mandrake Linux minn v8.1 'il\n"
-"quddiem.\n"
-"\n"
-"Skond kemm inti familjari mal-Mandrake Linux, agħżel waħda minn dawn:\n"
-"\n"
-" * Rakkomandat: agħżel din jekk qatt ma nstallajt sistema Mandrake Linux \n"
-"qabel. L-installazzjoni tkun iżjed sempliċi u tiġi mistoqsi biss ftit \n"
-"mistoqsijiet.\n"
-"\n"
-" * Espert: jekk għandek esperjenza sew ta' GNU/Linux tista' tagħżel din\n"
-"il-klassi ta' installazzjoni. L-installazzjoni esperta tħallik tagħmel \n"
-"installazzjoni personalizzata ħafna. Xi wħud mill-mistoqsijiet jistgħu "
-"ikunu\n"
-"diffiċli tirrispondihom jekk ma tafx sew lill-GNU/Linux, għalhekk tagħżilx\n"
-"din il-klassi jekk ma tafx x'qed tagħmel."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalment, DrakX jagħżillek it-tastiera tajba (skond il-lingwa li\n"
-"għażilt) u anqas tara dan il-pass. Però, jista' jkollok tastiera\n"
-"li ma taqbilx eżatt mal-lingwa: per eżempju, jekk int titkellem bil-\n"
-"Malti imma tgħix fi Franza, tista' tkun trid tastiera Franċiża, jew\n"
-"jista' jkollok tastiera Maltija ibbażata fuq tastiera US. F'dawn il-\n"
-"każi, trid tmur lura f'dan il-pass u tagħżel it-tastiera tajba mil-\n"
-"lista.\n"
-"\n"
-"Klikkja fuq il-buttuna \"Oħrajn\" biex tara l-lista kompleta ta' \n"
-"tastiera li hemm fis-sistema."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Jekk jogħġbok agħżel il-lingwa preferuta għall-installazzjoni u l-użu tas-\n"
-"sistema.\n"
-"Agħfas il-buttuna \"Avvanzat\" biex tagħżel lingwi oħra li tixtieq fuq is-\n"
-"sistema. Jekk tagħżel lingwi oħra, il-fajls speċifiċi għal dik il-lingwa "
-"jiġu\n"
-"nstallati fuq is-sistema. Per eżempju, tista' tagħżel il-Malti bħala lingwa\n"
-"ewlenija fil-lista, u fis-sezzjoni avvanzata tagħżel Taljan u Russu billi \n"
-"tikklikkja l-istilla ta' maġenbhom.\n"
-"\n"
-"Innota li tista' tagħżel kemm trid lingwi. Ladarba tkun għażilt il-lingwi\n"
-"li trid agħfas \"OK\" biex tkompli."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Impliċitament, DrakX jassumi li għandek maws b'żewġ buttuni u jissettjah\n"
-"għall-emulazzjoni tat-tielet buttuna. DrakX kapaċi jinduna waħdu jekk il-\n"
-"maws huwiex PS/2, serjali jew USB.\n"
-"\n"
-"Jekk tixtieq tispeċifika tip ta' maws differenti, agħżel it-tip tajjeb mil-\n"
-"lista provduta.\n"
-"\n"
-"Jekk tagħżel tip ta' maws differenti mill-oriġinali, tiġi provduta faċilità\n"
-"biex tittestja s-setings. Uża l-buttuni kollha u r-rota biex tivverifika li "
-"s-\n"
-"setings jaħdmu sew. Jekk il-maws ma jaħdimx sew agħfas \"spazju\" jew\n"
-"[Enter] biex tikkanċella u terġa tagħżel ieħor."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Jekk jogħġbok agħżel il-port it-tajjeb. Per eżempju, il-port \"COM1\" fil-\n"
-"Windows huwa ekwivalenti għal \"ttyS0\" fil-GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Dan huwa punt ta' deċiżjoni kruċjali għas-sigurtà tas-sistema GNU/Linux\n"
-"tiegħek: trid tagħżel password għal \"root\". \"root\" huwa l-user li\n"
-"jintuża bħala amministratur tas-sistema, u huwa l-uniku user awtorizzat\n"
-"li jaġġorna s-sistema, iżid users, jibdel il-konfigurazzjoni. eċċ. Fi kliem\n"
-"ieħor, \"root\" kapaċi jagħmel kollox! Għalhekk huwa importanti li tagħżel\n"
-"password li diffiċli biex taqtagħha -DrakX iwissik jekk tagħżel waħda faċli\n"
-"wisq. Kif tista' tinduna, huwa anke possibbli li ma ddaħħal xejn bħala "
-"password,\n"
-"imma dan huwa perikoluż ĦAFNA u aħna ma nirrakkomandawh qatt. Peress li "
-"\"root\"\n"
-"jista' jegħleb kull limitazzjoni, saħansitra jħassar l-informazzjoni u \n"
-"partizzjonijiet kollha, huwa mportanti li jkun diffiċli kemm jista' jkun li\n"
-"nies oħra jidħlu bħala \"root\".\n"
-"\n"
-"Il-password l-aħjar li jkun taħlita ta' ittri u numri, u ta' l-inqas twil "
-"8 \n"
-"karattri. M'għandek qatt tikteb il-password ta' \"root\" - dan jagħmilha\n"
-"faċli wisq tikkomprometti s-sistema.\n"
-"\n"
-"Fl-istess ħin tagħmilx il-password twil jew komplikat wisq għax int trid\n"
-"tkun kapaċi tiftakarha.\n"
-"\n"
-"Il-password mhux se jintwera fuq l-iskrin waqt li tittajpjah. Għalhekk trid\n"
-"tittajpjah darbtejn biex jonqos iċ-ċans li tagħmel żball waqt li tittajpja.\n"
-"Jekk tagħmel l-istess żball darbtejn, trid tittajpja l-password b'dan il-"
-"mod\n"
-"sakemm tibdlu.\n"
-"\n"
-"Fil-modalità esperta għandek l-għażla li taqbad ma' server ta' "
-"awtentikazzjoni,\n"
-"bħal NIS jew LDAP.\n"
-"\n"
-"Jekk in-network tiegħek juħa protokoll LDAP (jew NIS) għall-"
-"awtentikazzjoni,\n"
-"agħżel \"LDAP\" jew \"NIS\" bħala awtentikazzjoni. Jekk ma tafx, staqsi "
-"lill-\n"
-"amministratur tan-network.\n"
-"\n"
-"Jekk il-kompjuter tiegħek mhux imqabbad ma' network amministrat, agħżel\n"
-"\"Fajls lokali\" għall-awtentikazzjoni."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO u grub huma \"boot loaders\" għall-GNU/Linux. Dan l-istadju normalment\n"
-"huwa totalment awtomatizzat. Fil-fatt, DrakX janalizza s-settur \"boot\" "
-"tad-\n"
-"diska u jaġixxi skond x'isib hemm:\n"
-"\n"
-" * Jekk isib settur boot tal-Windows, dan jiġi mibdul mal-ġdid;\n"
-"\n"
-"F'każ ta' dubju, DrakX jurik window b'diversi għażliet.\n"
-"\n"
-" * \"Boot loader x'tuża\": għandek tliet għażliet:\n"
-"\n"
-"    * \"GRUB\": jekk tippreferi grub (menu testwali).\n"
-"\n"
-"    * \"LILO b'menu grafiku\": jekk tippreferi LILO b'modalità grafika.\n"
-"\n"
-"    * \"LILO b'menu testwali\": jekk tippreferi LILO b'modalità testwali.\n"
-"\n"
-" * \"Apparat boot\": ġeneralment ma tbiddilx il-valur impliċitu (\"/dev/hda"
-"\"),\n"
-"imma jekk tippreferi, il-bootloader jista' jiġi nstallat fuq it-tieni diska\n"
-"(\"/dev/hdb\") jew saħanistra floppy (\"/dev/fd0\").\n"
-"\n"
-" * \"Pawża qabel ittella' impliċitu\": meta tixgħel il-kompjuter, dan "
-"jistenna\n"
-"daqshekk biex il-user ikun jista' jagħmel għażliet oħra.\n"
-"\n"
-"!! Importanti tkun taf li jekk ma tinstallax \"bootloader\" (jekk tagħfas \n"
-"\"Ikkanċella\"), irid ikollok metodu ieħor biex ittella' s-sistema "
-"Mandrake \n"
-"Linux. Kun af sew x'qed tagħmel qabel tibdel waħda minn dawn l-għażliet. !!\n"
-"\n"
-"Jekk tagħfas il-buttuna \"Avvanzat\" f'din il-window tara diversi għażliet\n"
-"avvanzati għal users esperti.\n"
-"\n"
-"Wara li tkun ikkonfigurajt il-parametri ġenerali tal-bootloader, tiġi\n"
-"preżentat b'lista ta' għażliet tal-boot li jkunu disponibbli meta tixgħel.\n"
-"\n"
-"Jekk għandek sistema operattiva oħra installata fuq il-kompjuter, din tkun\n"
-"miżjuda mal-menu tal-boot. Hawn, tista' tirfina l-għażliet eżistenti. "
-"Agħżel\n"
-"wieħed mill-elementi u agħfas \"Biddel\" biex tbiddilhom u \"Neħħi\" biex "
-"tneħħi l-element. \"Żid\" joħloq element ġdid, u \"Lest\" imur fil-pass\n"
-"li jmiss ta' l-installazzjoni."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) u grub huma \"boot loaders\": huma jagħtuk il-faċilità\n"
-"li tħaddem lill-GNU/Linux jew sistema operattiva oħra preżenti fuq il-"
-"kompjuter.\n"
-"Normalment, dawn is-sistemi operattivi oħrajn jiġu magħrufa u konfigurati\n"
-"awtomatikament. Jekk dan m'hux il-każ, tista' żżid għażla mal-menu "
-"manwalment\n"
-"f'dan l-iskrin. Aċċerta li tagħżel il-parametri tajbin.\n"
-"\n"
-"Għandek mnejn ma tkunx trid tagħti aċċess għal dawn is-sistemi operattivi "
-"lill\n"
-"ħadd. F'dak il-każ tista' tħassar dawn l-elementi. Imma mbgħad tkun trid "
-"floppy\n"
-"apposta biex tidħol f'dawn is-sistemi operattivi!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Hawn trid tindika fejn tixtieq tpoġġi l-informazzjoni meħtieġa biex tibda\n"
-"s-sistema.\n"
-"\n"
-"Jekk ma tafx x'inti tagħmel, agħżel \"L-ewwel settur tad-diska (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Hawn tista' tagħżel sistema ta' printjar għall-kompjuter tiegħek. Sistemi\n"
-"operattivi oħra joffrulek waħda, Mandrake Linux jagħtik tlieta.\n"
-"\n"
-" * \"pdq\" - li jfisser \"printja minngħajr kju\", huwa l-aħjar għażla\n"
-"jekk għandek konnessjoni diretta mal-printer, trid il-faċilità li twaqqaf\n"
-"printjar malajr, u m'għandekx printers bin-network. Dan il-metodu jaċċetta\n"
-"biss networking sempliċi, u mhux effiċjenti fuq network. Tista' tagħżel \n"
-"\"pdq\" jekk din hija l-ewwel esperjenza tiegħek fuq Linux. Tista' tibdel\n"
-"din l-għażla wara billi tħaddem PrinterDrake miċ-Ċentru tal-Kontroll \n"
-"Mandrake u tagħfas il-buttuna \"Espert\".\n"
-"\n"
-" * \"CUPS\"\"Sistema ta' Printjar Komuni tal-Linux\" huwa eċċellenti\n"
-"kemm biex tipprintja fuq printer lokali kif ukoll fuq printer in-naħa l-"
-"oħra\n"
-"tad-dinja. Huwa sempliċi u jista' jaħdem kemm bħala server kif ukoll bħala\n"
-"klijent għal sistemi antiki \"lpd\", għalhekk huwa kompatibbli ma' sistemi\n"
-"antiki. Kapaċi jagħmel ħafna affarijiet, imma l-konfigurazzjoni bażika hija\n"
-"sempliċi kważi daqs \"pdq\". Biex jemula server \"lpd\", trid tħaddem is-\n"
-"servizz \"cups-lpd\". CUPS għandu interfaċċji grafiċi biex tipprintja jew\n"
-"tissettja l-għażliet tal-printer.\n"
-"\n"
-" * \"lprNG\" - \"line printer daemon New Generation\". Din is-sistema "
-"tagħmel\n"
-"bejn wieħed u ieħor l-istess affarijiet li jagħmlu l-oħrajn, imma kapaċi "
-"ukoll\n"
-"juża printers fuq network Novell, għax jaċċetta l-protokoll IPX, u kapaċi\n"
-"jipprintja lill kmandijiet tax-shell. Jekk għandek network Novell jew\n"
-"għandek bżonn tipprintja permezz ta' kmand mingħajr ma tuża pajp, uża "
-"lprNG.\n"
-"Altrimenti, CUPS huwa aħjar għax huwa iżjed sempliċi u jaħdem aħjar fuq \n"
-"network."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX issa se jfittex apparat IDE fuq il-kompjuter tiegħek. Huwa wkoll\n"
-"ifittex kard waħda jew iżjed SCSI PCI fuq is-sistema. Jekk tinstab kard\n"
-"SCSI, DrakX awtomatikament jinstalla d-driver għaliha.\n"
-"\n"
-"Press li dan il-proċess mhux dejjem isib ċerti apparat. DrakX jitolbok\n"
-"tikkonferma jekk hemmx kard SCSI PCI fuq il-kompjuter. Agħfas \"Iva\" jekk\n"
-"taf li għandek kard simili fuq il-kompjuter. Int tingħata lista ta' kards \n"
-"SCSI mnejn tagħżel tiegħek. Agħżel \"Le\" jekk m'għandekx kards SCSI. Jekk \n"
-"m'intix ċert tista' tiċċekkja l-lista ta' ħardwer misjub fis-sistema billi\n"
-"tagħfas \"Ara info. ħardwer\" u mbgħad \"OK\". Eżamina l-lista ta' apparat u "
-"mbgħad agħfas \"OK\" biex tiġi lura fil-konfigurazzjoni ta' SCSI.\n"
-"\n"
-"Jekk trid tissettja l-adattur manwalment, DrakX jistaqsik jekk tridx \n"
-"tispeċifika għażliet għalih. Jaqbillek tħalli lill DrakX jeżamina l-ħardwer\n"
-"biex isir jaf liema għażliet għandu bżonn l-apparat biex jaħdem. Dan \n"
-"normalment jaħdem sew.\n"
-"\n"
-"Jekk DrakX mhux kapaċi jagħraf l-għażliet li jridu jiġu mgħoddija, trid\n"
-"tispeċifikahom manwalment lid-driver. Jekk jogħġbok iċċekkja l-\"User Guide"
-"\", (kapitlu 3, \"Collecting Information on Your Hardware\") għal ħjilijiet "
-"dwar\n"
-"kif issir taf il-parametri meħtieġa mid-dokumentazzjoni ta' l-apparat, "
-"mill-\n"
-"website tad-ditta tiegħu, jew minn Microsoft Windows (jekk tuża dan l-"
-"apparat\n"
-"fuq il-Windows ukoll)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hawn issib diversi parametri li jikkonċernaw il-kompjuter tiegħek. Skond\n"
-"l-apparat li għandek imqabbad tista' tara divers minn dawn:\n"
-"\n"
-" * \"Maws\": iċċekkja l-konfigurazzjoni preżenti tal-maws u klikkja\n"
-"l-buttuna biex tibdlu jekk meħtieġ.\n"
-"\n"
-" * \"Tastiera\": iċċekkja jekk dan jaqbilx mat-tip ta' tastiera tiegħek;\n"
-"agħfas il-buttuna biex tibdlu.\n"
-"\n"
-" * \"Żona tal-ħin\": DrakX, impliċitament, jipprova jaqta' skond il-lingwa\n"
-"li għażilt. Hawnhekk ukoll, bħal fil-każ tat-tastiera, tista' ma tkunx fil-\n"
-"pajjiż ewlieni tal-lingwa, għalhekk tista' tibdel iż-żona billi tagħfas din\n"
-"il-buttuna.\n"
-"\n"
-" * \"Printer\": jekk tagħfas il-buttuna tal-printer tista' tħaddem saħħar\n"
-"biex tissettja l-printer.\n"
-"\n"
-" * \"Kard awdjo\": jekk instabet kard tal-awdjo fuq il-kompjuter tiegħek,\n"
-"tintwera hawn. M'hemm xejn xi tbiddel waqt l-installazzjoni.\n"
-" * \"Kard TV\": jekk instabet kard tat-TV fuq il-kompjuter tiegħek,\n"
-"tintwera hawn. M'hemm xejn xi tbiddel waqt l-installazzjoni.\n"
-"\n"
-" * \"Kard ISDN\": jekk instabet kard ISDN fuq il-kompjuter tiegħek,\n"
-"tintwera hawn. Tista' tagħfas il-buttuna biex tbiddel il-parametri "
-"assoċjati\n"
-"magħha."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Agħżel liema ħard disk trid tħassar biex tinstalla l-partizzjonijiet tal-\n"
-"Mandrake Linux fuqha. Oqgħod attent, l-informazzjoni kollha fuq din id-\n"
-"diska jintilef u ma jkunx jista' jinġab lura!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klikkja fuq \"OK\" jekk trid tħassar l-informazzjoni u partizzjonijiet \n"
-"kollha li hemm fuq dan il-ħard disk. Oqgħod attent, wara li tagħfas \"OK\"\n"
-"ma tkunx tista' terġa' tikseb l-informazzjoni u partizzjonijiet li hemm\n"
-"fuq dan il-ħard disk, inkluż fajls tal-Windows.\n"
-"\n"
-"Klikkja \"Ikkanċella\" biex twaqqaf dan il-proċess minngħajr ma tħassar\n"
-"l-informazzjoni u partizzjonijiet fuq dan il-ħard disk."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Trid ukoll tifformattja %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Int għażilt dan is-server/s: %s\n"
-"\n"
-"\n"
-"Dawn is-servers huma attivati impliċitament. M'għandhom ebda problemi ta'\n"
-"sigurtà magħrufa, imma jistgħu jinstabu ġodda minn żmien għal żmien. "
-"Għalhekk,\n"
-"importanti li żżommhom aġġornati.\n"
-"\n"
-"\n"
-"Żgur li trid tinstalla dawn is-servers?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ma nsitax nuża \"broadcast\" minngħajr dominju NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Daħħal floppy formattjata FAT fid-drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Din il-floppy m'hix formattjata FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Bex tuża din l-għażla ta' pakketti, ħaddem l-installazzjoni b' \"linux "
-"defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Problema fil-qari tal-fajl %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Xi apparat fil-kompjuter tiegħek jeħtieġ drivers speċjali biex jaħdem.\n"
-"Tista' ssib iżjed informazzjoni dwarhom fuq: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Għandek bżonn partizzjoni \"root\".\n"
-"Għal dan l-ewwel oħloq partizzjoni (jew agħżel waħda eżistenti)\n"
-"Imbgħad agħżel \"Punt ta' mmuntar\" u ssettjah għal \"/\""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Għandek bżonn partizzjoni \"swap\""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"M'għandekx partizzjoni \"swap\".\n"
-"\n"
-"Trid tkompli xorta?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Għandek bżonn partizzjoni FAT immuntata fuq /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Uża l-ispazju vojt"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "M'hemmx biżżejjed spazju vojt biex jinħolqu l-partizzjonijiet il-ġodda"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Uża partizzjoni eżistenti"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "M'hemmx partizzjonijiet eżistenti x'nuża"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Uża l-partizzjoni tal-Windows għal loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Liema partizzjoni trid tuża għal Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Agħżel id-daqsijiet"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Daqs tal-partizzjoni root f' MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Daqs tal-partizzjoni Swap f' MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Uża l-ispazju vojt fil-partizzjoni tal-Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Liema partizzjoni trid tibdlilha d-daqs?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Qed nikkalkula l-limiti tal-filesystem tal-Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Il-programm biex tibdel id-daqs ta' partizzjoni FAT m'hux\n"
-"kapaċi tbiddel din il-partizzjoni - instabet din il-problema:\n"
-"%s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Il-partizzjoni tal-Windows hija mgerfxa wisq. Jekk jogħġbok ħaddem \"defrag"
-"\"."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"TWISSIJA!\n"
-"\n"
-"DrakX issa se jbiddel id-daqs tal-partizzjoni Windows. Oqgħod\n"
-"attent: dan il-proċess huwa perikoluż. Jekk għadek m'għamiltx dan,\n"
-"jaqbillek l-ewwel toħroġ mill-proċess tal-installazzjoni, tħaddem\n"
-"\"scandisk\" mill-Windows (u idejalment anke \"defrag\"), u \n"
-"mbgħad terġa' tibda l-installazzjoni. Int rakkomandat ukoll li \n"
-"tieħu \"backup\" tal-informazzjoni importanti.\n"
-"Meta tkun ċert, agħfas Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "X'daqs trid iżżomm għall-windows fuq"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partizzjoni %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Bdil tad-daqs FAT falla: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"M'hemmx partizzjoijiet FAT biex tibdel id-daqs jew biex tużahom bħala\n"
-"\"loopback\" (jew m'hemmx biżżejjed spazju)."
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Ħassar kull m'hemm fid-diska"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Neħħi l-Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Għandek iżjed minn ħard disk waħda. Fuq liema trid tinstalla l-Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Il-partizzjonijiet kollha fuq id-diska %s u l-informazzjoni ta' Ä¡o fihom se "
-"jintilfu"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partizzjonament personalizzat"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Uża fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Tista' tippartizzjona %s.\n"
-"X'ħin tlesti, tinsiex tikteb il-bidliet billi tittajpja \"w\"."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "M'għandekx biżżejjed spazju fuq il-partizzjoni Windows."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ma nistax insib spazju fejn ninstalla."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Is-saħħar ta' partizzjonament DrakX sab dawn is-soluzzjonijiet:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizzjonament falla: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Qed intella' n-network"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Qed inniżżel in-network"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Inqalgħet problema, imma ma nafx kif nieħu ħsieba sew.\n"
-"Tista' tkompli b'risku tiegħek"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punt ta' mmuntar doppju %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Xi pakketti importanti ma Ä¡ewx installati sew.\n"
-"Jew id-drive tas-CDROM, jew is-CD nnifisha huma difettużi.\n"
-"Tista' tiċċekkja s-CD fuq kompjuter diġà nstallat permezz tal-kmand \"rpm -"
-"qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Merħba għal %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "M'hemmx drive floppy"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Dieħel fil-pass \"%s\"\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Is-sistema hija nieqsa mir-riżorsi. Jista' jkollok problema biex tinstalla \n"
-"l-Mandrake Linux. Jekk jiġri dan, ipprova installazzjoni testwali. Għal "
-"dan,\n"
-"agħfas F1 meta titla' s-CD, imbgħad ittajpja \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Klassi ta' installazzjoni"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Jekk jogħġbok agħżel waħda minn dawn il-klassijiet ta' installazzjoni:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Id-daqs totali tal-gruppi li għażilt huwa madwar %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jekk tixtieq tinstalla inqas minn dawn id-daqs, agħżel il-perċentaġġ\n"
-"ta' pakketti li trid tinstalla.\n"
-"\n"
-"Perċentaġġ baxx jinstalla biss l-iżjed programmi importanti;\n"
-"perċentaġġ ta 100%% jinstalla l-pakketti kollha magħżula."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Fuq id-diska għandek spazju għal %d%% biss minn dawn il-pakketti.\n"
-"\n"
-"Jekk tixtieq tinstalla inqas minn hekk, agħżel il-perċentaġġ tal-\n"
-"pakketti li trid tinstalla. Perċentaġġ baxx jinstalla biss l-iżjed \n"
-"programmi importanti; perċentaġġ ta %d%% jinstalla kemm jista' jkun."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Tkun tista' tagħżilhom b'mod iżjed speċifiku fil-pass li jmiss."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Perċentaġġ ta' pakketti x'tinstalla"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Għażla ta' gruppi ta' pakketti"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Agħżel pakketti individwalment"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Daqs totali: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakkett ħażin"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Isem: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verżjoni: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Daqs: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importanza: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Ma tistax tagħżel dan il-pakkett għax ma fadalx biżżejjed spazju għalih"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Dawn huma l-pakketti li se jiġu nstallati"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Dawn huma l-pakketti li se jiġu mneħħija"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ma tistax tagħżel dan il-pakkett"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dan il-pakkett huwa kruċjali, ma jistax jitneħħa"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ma tistax tneħħi l-għażla minn dan il-pakkett, diġà nstallat."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dan il-pakkett għandu bżonn jiġi aġġornat.\n"
-"Żgur li trid tneħħi l-għażla?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ma tistax tneħħi l-għażla minn dan il-pakkett. Irid jiġi aġġornat."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Uri l-pakketti magħżula awtomatikament"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installa"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Aqra/ikteb fuq floppy"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Qed naġġorna l-għażla ta' pakketti"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Installazzjoni minima"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Agħżel il-pakketti li trid tinstalla"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Qed ninstalla"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Qed nistima"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Ħin li fadal "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Stenna ftit, qed nipprepara l-installazzjoni"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakketti"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Qed jinstalla il-pakkett %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Naċċetta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Ma naċċettax"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ibdel id-diska CD!\n"
-"\n"
-"Jekk jogħġbok daħħal id-diska mmarkata \"%s\" fid-drive u agħfas Ok meta "
-"tlesti.\n"
-"Jekk m'għandekx din id-diska, agħfas \"Ikkanċella\" biex taqbeż il-pakketti "
-"li qegħdin fuqha."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Trid tkompli xorta?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Kien hemm problema fl-ordni tal-pakketti:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Kien hemm problema fl-installazzjoni tal-pakketti:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Inqalgħet problema"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Żgur trid toħroġ mill-installazzjoni?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Qbil mal-liċenzja"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastiera"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Jekk jogħġbok agħżel tqassim tat-tastiera."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hawn issib lista sħiħa tat-tastieri disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Liema klassi ta' installazzjoni trid?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installa/AÄ¡Ä¡orna"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Din hija installazzjoni ġdida jew aġġornament?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Rakkomandat"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Espert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "AÄ¡Ä¡ornament"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "AÄ¡Ä¡orna l-pakketti biss"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Jekk jogħġbok agħżel it-tip tal-maws."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port tal-maws"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Jekk jogħġbok agħżel il-port serjali li miegħu hemm imqabbad il-maws."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulazzjoni tal-buttuni"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulazzjoni ta' buttuna #2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulazzjoni ta' buttuna #3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Qed nissettja kard PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Qed nikkonfigura IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "m'hemmx partizzjonijiet disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Qed niskannja partizzjonijiet biex insib punti ta' mmuntar"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Agħżel punti ta' mmuntar"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ma nistax naqra t-tabella tal-partizzjonijiet, hija korrotta wisq :(\n"
-"Nista nkompli billi nħassar partizzjonijiet ħżiena (L-INFORMAZZJONI \n"
-"KOLLHA tintilef). L-alternattiva hi li ma tħallix lill DrakX ibiddel\n"
-"it-tabella tal-partizzjonijiet (il-problema hi %s)\n"
-"\n"
-"Trid titlef il-partizzjonijiet kollha?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ma rnexxielux jaqra t-tabella tal-partizzjonijiet.\n"
-"Jekk tkompli jkun riskju tiegħel!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"M'hemmx spazju għal bootstrap ta' 1MB. L-installazzjoni se tkompli, imma "
-"biex tħaddem is-sistema trid toħloq partizzjoni bootstrap f' Diskdrake."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ebda partizzjoni root ma nstabet biex issir aġġornament"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partizzjoni root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Liem hi l-partizzjoni root tas-sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Trid tirristartja sabiex il-bidliet fit-tabella tal-partizzjonijiet ikollhom "
-"effett."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Agħżel liema partizzjonijiet trid tifformattja"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Trid tiċċekkja għal blokki ħżiena?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Qed nifformattja l-partizzjonijiet"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Qed noħloq u nifformattja fajl %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"M'hemmx biżżejjed swap biex issir l-installazzjoni, jekk jogħġbok żid ftit "
-"swap"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Qed insib pakketti disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Qed insib pakketti x'naġġorna"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Is-sistema m'għandiex biżżejjed spazju għall-installazzjoni jew aġġornament "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Komplet (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimu (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rakkomandat (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Jekk jogħġbok agħżel \"ikteb\" jew \"aqra\" l-għażla tal-pakketti fuq\n"
-"floppy. Il-format huwa l-istess bħal floppies ġenerati bl-auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Aqra' mill-floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Qed tinqara' l-floppy"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Għażla ta' pakketti"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Daħħal floppy li fiha għażla ta' pakketti"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Ikteb fuq floppy"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Id-daqs tal-għażla huwa ikbar mill-ispazju disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tip ta' installazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Għadek m'għażiltx grupp ta' pakketti\n"
-"Jekk jogħġbok agħżel installazzjoni minima li trid."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Bl-XWindows"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "B' dokumentazzjoni bażika (rakkomandat)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Installazzjoni verament minima (mingħajr urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jekk għandek is-CDs kollha fil-lista ta' taħt agħfas \"Ok\".\n"
-"Jekk m'għandek ebda waħda agħfas \"Ikkanċella\".\n"
-"Jekk m'għandekx uħud minnhom, neħħi li m'għandekx u agħfas \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM immarkat \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Qed nipprepara l-installazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Qed jiġi nstallat il-pakkett %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfigurazzjoni ta' wara l-installazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Jekk jogħġbok daħħal \"boot floppy\" fid-drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Jekk jogħġbok daħħal \"update modules floppy\" fid-drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Issa għandek il-possibbiltà li tniżżel softwer immirat għaċ-ċifrazzjoni.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Issa tista' tniżżel pakketti aġġornati li ġew pubblikati wara li\n"
-"din id-distribuzzjoni inħarġet.\n"
-"\n"
-"Tista' tikseb tiswijiet ta' sigurtà jew bugs, imma jrid ikollok\n"
-"konnessjoni mal-internet biex tipproċedi.\n"
-"\n"
-"Trid tinstalla dawn l-aġġornamenti?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Qed nikkuntattja l-website ta' Mandrake Linux biex nikseb lista tal-mirja "
-"disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Agħżel mera minn fejn trid iġġib il-pakketti"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Qed nikkuntattja l-mera biex nikseb lista tal-pakketti disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Liem hi ż-żona orarja tiegħek?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Arloġġ tal-kompjuter issettjat GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sinkronizzazzjoni tal-ħin awtomatiku (permezz ta' NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Server NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Server CUPS remot"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ebda printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Għandek iżjed?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sommarju"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Maws"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Żona tal-ħin"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Kard ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Kard awdjo"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Kard TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fajls lokali"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Issettja l-password ta' \"root\""
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ebda password"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dan il-password sempliċi wisq (irid ikun twil tal-inqas %d ittri)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Awtentikazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Awtentikazzjoni LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "DN bażi LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Server LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Awtentikazzjoni NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominju NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Bootdisk personalizzata tipprovdi mezz kif ittella' s-sistema Linux\n"
-"minngħajr ma' tinstalla l-bootloader normali. Dan huwa utli jekk ma "
-"tixtieqz\n"
-"tinstalla SILO fuq is-sistema tiegħek, jew jekk xi programm ineħħilek\n"
-"is-SILO, jew jekk SILO ma jaħdimx mal-ħardwer tiegħek. Bootdisk "
-"personalizzata\n"
-"tista' wkoll tintuża mal-\"image\" tat-tiswija (rescue) ta' Mandrake, biex "
-"ikun\n"
-"iżjed faċli tirkupra minn problemi serji.\n"
-"\n"
-"Jekk tixtieq toħloq bootdisk għas-sistema tiegħek, daħħal floppy fl-ewwel \n"
-"drive u agħfas OK."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Floppy drive ewlieni"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "It-tieni floppy drive"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Aqbeż"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Bootdisk personalizzata tipprovdi mezz kif ittella' s-sistema Linux\n"
-"minngħajr ma' tinstalla l-bootloader normali. Dan huwa utli jekk ma "
-"tixtieqz\n"
-"tinstalla LILO (jew grub) fuq is-sistema tiegħek, jew jekk xi programm \n"
-"ineħħilek il-LILO, jew jekk LILO ma jaħdimx mal-ħardwer tiegħek. Bootdisk \n"
-"personalizzata tista' wkoll tintuża mal-\"image\" tat-tiswija (rescue) ta' \n"
-"Mandrake, biex ikun iżjed faċli tirkupra minn problemi serji.\n"
-"Tixtieq toħloq bootdisk għas-sistema tiegħek?"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Jiddispjaċini, ebda floppy drive disponibbli"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Agħżel liema floppy drive tixtieq tuża biex toħloq il-bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Daħħal floppy ġdida f' %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Qed tinħoloq diska \"boot\""
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Qed nipprepara l-bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Jidher li għandek magna \"OldWorld\" jew mhux \n"
-"magħrufa. Il-bootloader \"yaboot\" m'hux se jaħdem fuqha. \n"
-"L-installazzoni se tkompli, imma trid tuża BootX biex \n"
-"ittella' l-Linux."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Trid tuża \"aboot\"?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Problema fl-installazzjoni ta' aboot.\n"
-"trid tipprova timponi l-installazzoni anke jekk tħassar l-ewwel partizzjoni?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Qed ninstalla l-bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "L-installazzjoni tal-bootloader falla. Dan kien il-messaġġ:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Għandek mnejn trid tbiddel is-setings tal-Open Firmware u tbiddel l-\n"
-"apparat tal-boot biex jiffunzjona l-bootloader.  Jekk ma tixtieqx tara\n"
-"l-prompt tal-bootloader meta tirristartja, żomm Command-Option-O-F \n"
-"waqt ir-reboot u daħħal:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Imbgħad ittajpja: shut-down\n"
-"Meta jerġa' jitla' għandek tara l-prompt tal-bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Daħħal floppy vojta' fi drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Qed jinħoloq floppy awto-installazzjoni"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Xi passi ma Ä¡ewx finalizzati.\n"
-"\n"
-"Trid toħroġ issa?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Prosit! L-installazzjoni issa lesta.\n"
-"Neħħi l-floppy/CD u agħfas Enter biex tirristartja.\n"
-"\n"
-"\n"
-"Għal informazzjoni dwar aġġornamenti li saru għal din il-verżjoni ta' "
-"Mandrake \n"
-"Linux, iċċekkja s-sezzjoni \"Errata\" li hemm fuq:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informazzjoni dwar kif tissettja s-sistema tinstab fil-kapitlu \"Post-install"
-"\" \n"
-"fl-Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Oħloq floppy awto-installa"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L-awto-installazzjoni tista' tkun totalment awtomatizzata\n"
-"jekk trid. F'dak il-każ tieħu l-ħard disk kollu!!\n"
-"(dan huwa ntenzjonat għal installazzjoni fuq kompjuter ġdid)\n"
-"\n"
-"Forsi tippreferi tuża \"replay\" tal-installazzjoni.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Awtomatizzata"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Replay"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Ikteb l-għażla ta' pakketti"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installazzjoni Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> bejn l-elementi  | <Space> jimmarka | <F12> skrin li jmiss "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu nieqes"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper nieqes"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Agħżel fajl"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avvanzat"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Bażiku"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Stenna ftit"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Espandi friegħi"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Agħlaq friegħi"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Aqleb bejn lista sempliċi jew kategorizzata"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Għażla ħażina, erġa' pprova\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "L-għażla tiegħek? (impliċita: %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Elementi li trid timla':\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "L-għażla tiegħek? (0/1, impliċitu: %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Buttuna \"%s\": %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Trid tikklikkja din il-buttuna?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "L-għażla tiegħek? (impliċita: \"%s\"%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hemm ħafna affarijiet minn xiex tagħżel (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Nota, l-isem inbidel:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Erġa' sottometti"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "ÄŠekk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Ġermaniż"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spanjol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandiż"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franċiż"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveġiż"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pollakk"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russu"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Svediż"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Tastiera UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Tastiera US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albaniż"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armen (antik)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armen (tajprajter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armen (fonetiku)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Ażeri (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belġjan"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaru (fonetiku)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaru (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brażiljan (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bjelorussu"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svizzeru (tqassim Ġermaniż)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svizzeru (tqassim Franċiż)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "ÄŠekk (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Ġermaniż (bla deadkeys)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Daniż"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveġiż)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svediż)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonjan"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ġorġjan (tqassim \"Russu\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ġorġjan (tqassim \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grieg"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungeriż"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroat"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Iżraeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Iżraeli (fonetiku)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranjan"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandiż"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Taljan"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Ġappuniż 106 buttuna"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korean"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latin Amerikan"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litwan AZERTY (antik)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litwan AZERTY (Ä¡did)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litwan QWERTY \"number row\""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litwan QWERTY fonetiku"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvjan"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Maċedonjan"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Olandiż"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pollakk (qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pollakk (qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugiż"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadiż (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumen (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumen (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russu (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloven"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakk (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serb (Ä‹irilliku)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Taġik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tork (mudell tradizzjonali \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tork (mudell modern \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukranjan"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Tastiera US (internazzjonali)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamiż qwerty \"numeric row\""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslav (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Buttuna Alt leminija"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Iż-żewġ buttuni \"shift\" flimkien"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Ctrl u Shift flimkien"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Buttuna CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl u Alt flimkien"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt u Shift flimkien"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Buttuna \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Buttuna \"Windows\" tax-xellug"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Buttuna \"Windows\" tal-lemin"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntaġġ ċirkolari %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "L-ewwel neħħi l-volumi loġiċi minn ġo fih\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Sapport għal PCMCIA m'għadux jeżisti fil-kernels 2.2. Jekk jogħġbok uża "
-"kernel 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Maws - Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Maws bir-rota Ä¡eneriku PS2"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "buttuna waħda"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Ä eneriku 2 buttuni"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Ä eneriku"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rota"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serjal"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Ä eneriku 3 buttuni"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Maws Logitech (serjali, tip C7 antik)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 buttoni"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 buttoni"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ebda"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ebda maws"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Jekk jogħġbok ittestja l-maws"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Biex tħaddem il-maws"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MEXXI R-ROTA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-*-*-bold-r-normal--17-*-100-100-p-*-iso8859-3,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Spiċċa"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Li jmiss ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Ta' qabel"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Dan tajjeb?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Aqbad ma' l-internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"F'Malta, il-metodu li jintuża biex taqbad mal-ADSL huwa\n"
-"pptp, f'pajjiżi oħra l-iżjed metodu komuni huwa pppoe, \n"
-"filwaqt li wħud jużaw dhcp."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "uża dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "uża pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "uża pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Liema klijent dhcp trid tuża?\n"
-"Normali: dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ebda kard tan-network ethernet ma nstabet fuq il-kompjuter.\n"
-"Ma nistax nissettja dan it-tip ta' kollegament minngħajrha."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Agħżel l-interfaċċja tan-network"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Jekk jogħġbok agħżel liema kard tan-network trid tuża biex taqbad ma' l-"
-"internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ebda kard tal-internet ma stabet"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurazzjoni tan-network"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Jekk jogħġbok daħħal l-isem tal-kompjuter tiegħek jekk \n"
-"tafu. Xi servers DHCP jeħtieġu l-isem biex jaħdmu. L-isem\n"
-"tal-kompjuter tiegħek irid ikun wieħed sħiħ, bħal\n"
-"\"anna.finanzi.ditta.com\""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Isem tal-kompjuter"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Saħħar tal-Konfigurazzjoni tan-Network"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN estern"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Kard ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "X'tip ta' konnessjoni ISDN għandek?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"X'tip ta' konfigurazzjoni ISDN trid?\n"
-"\n"
-"* Il-kofigurazzjoni antika tuża isdn4net. Fiha għodda\n"
-"b'saħħithom imma tista' tkun diffiċli biex tissettjam\n"
-"u m'hix standard.\n"
-"\n"
-"* Il-konfigurazzjoni l-ġdida hija iżjed faċli tifimha,\n"
-"iżjed standard, imma fiha inqas għodda.\n"
-"\n"
-"Aħna nirrakkomandaw il-konfigurazzjoni ġdida.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurazzjoni Ä¡dida (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurazzjoni antika (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Konfigurazzjoni ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Agħżel provider.\n"
-" Jekk m'hux fil-lista, agħżel \"mhux imniżżel\""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protokoll Ewropew"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokoll Ewropew (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll għall-kumplament tad-dinja"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll għall-kumplament tad-dinja\n"
-" ebda kanal D (leased line)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Liema protokoll trid tuża?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "X'tip ta' kard għandek?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ma nafx"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jekk il-kard hija ISA, il-valuri fuq l-iskrin li jmiss għandhom ikunu "
-"tajbin.\n"
-"\n"
-"Jekk hija kard PCMCIA, trid tkun taf l-IRQ u IO tal-kard.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Waqqaf"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Kompli"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Liema hija l-kard ISDN tiegħek?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Sibt kard ISDN PCI, imma ma nafx x'tip hi. Jekk jogħġbok agħżel kard PCI fuq "
-"l-iskrin li jmiss."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ebda kard ISDN PCI ma stabet. Agħżel waħda fl-iskrin li jmiss."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Jekk jogħġbok agħżel ma' liema port serjali huwa mqabbad il-maws."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Għażliet \"dialup\""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Isem tal-konnessjoni"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Numru tat-telefon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Ibbażat fuq scripts"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Ibbażat fuq terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Isem tad-dominju"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "L-ewwel server DNS (opzjonali)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "It-tieni server DNS (opzjonali)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Tista taqta' minn ma' l-internet jew tirrikonfigura l-konnessjoni."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Tista tirrikonfigura l-konnessjoni."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Bħalissa int imqabbad ma' l-internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Tista taqbad mal-internet jew tirrikonfigura l-konnessjoni."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Bħalissa m'intix imqabbad ma' l-internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Aqbad"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Aqta'"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Ikkonfigura l-konnessjoni"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Konfigurazzjoni u konnessjoni tal-internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Issa se nikkonfiguraw il-konnessjoni %s"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Issa se nissettjaw il-konnessjoni %s.\n"
-"\n"
-"\n"
-"Agħfas OK biex tkompli."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigurazzjoni tan-network"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Peress li qed tagħmel installazzjoni minn fuq in-network, in-\n"
-"network diġà konfigurata.\n"
-"Agħfas Ok biex iżżomm din il-konfigurazzjoni, jew ikkanċella biex\n"
-"tbiddel il-konfigurazzjoni tal-internet u network.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Merħba għas-Saħħar tal-Konfigurazzjoni tan-Network\n"
-"\n"
-"Hawnhekk se nikkonfiguraw il-konnessjoni tal-internet/network.\n"
-"Jekk ma tixtieqx tuża l-għarfien awtomatiku (autodetect), neħħi l-marka.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Agħżel profil li trid tissettja"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Uża għarfien awtomatiku (auto-detect)"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Qed infittex l-apparat..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Konnessjoni b'modem normali"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "misjub fuq port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Konnessjoni ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s misjub"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Konnessjoni ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "misjub fuq interfaċċja %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Konnessjoni Cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "konnessjoni cable misjuba"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Konnessjoni LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "kard/s ethernet misjuba"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Agħżel liema konnessjoni trid tissettja"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Int ikkonfigurajet diversi modi biex taqbad ma' l-internet.\n"
-"Liema minnhom trid tuża?\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Konnessjoni ma' l-internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Trid taqbad b'din il-konnessjoni malli tixgħel?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Konfigurazzjoni network"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "In-network irid jiġi ristartjat."
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Kien hemm problema waqt li n-network kien qed jiġi ristartjat: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Prosit! Il-konfigurazzjoni tan-network u l-internet lesti.\n"
-"Din il-konfigurazzjoni issa se tiġi applikata għas-sistema.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Wara li jkun lest, aħna nirrikkmandaw li tirristartja s-sistema X biex "
-"tevita problemi ta' bdil fl-isem tal-kompjuter."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Instabu xi problemi waqt il-konfigurazzjoni.\n"
-"Ittestja l-konnessjoni permezz ta' net_monitor jew mcc. Jekk il-konnessjoni "
-"ma taħdimx, tista' terġa' tħaddem il-konfigurazzjoni."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"TWISSIJA: Dan l-apparat diġà kien konfigurat qabel biex jaqbad ma' l-"
-"internet.\n"
-"Sempliċiment aċċetta li żżomm dan l-apparat konfigurat.\n"
-"Jekk tbiddel il-valuri ta' taħt dawn jieħdu post il-konfigurazzjoni preżenti."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Jekk jogħġbok daħħal il-konfigurazzjoni IP għal dan il-kompjuter.\n"
-"Kull element huwa indirizz IP fil-format deċimali bit-tikek (eż, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Qed nikkonfigura apparat tan-network %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Indirizz IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP Awtomatiku"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L-indirizz IP irid ikun fil-format \"1.2.3.4\""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Jekk jogħġbok daħħal l-isem tal-kompjuter.\n"
-"Dan irid ikun isem sħiħ, bħal \"joe.linux.org.mt\".\n"
-"Tista' wkoll iddaħħal l-indirizz IP tal-gateway, jekk għandek wieħed."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (eż. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Apparat gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfigurazzjoni tal-proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Żomm kont tal-ID tal-kard tan-network (utli fuq laptops)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy mistenni jibda' http://"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy mistenni jibda' ftp://"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Konfigurazzjoni ta' l-internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Trid tipprova taqbad ma' l-internet issa?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Qed nittestja l-kollegament..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Is-sistema issa mqabbda ma' l-internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Għal raġunijiet ta' sikurezza, issa se naqta'"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Is-sistema donnha ma setgħetx taqbad ma' l-internet.\n"
-"Ipprova erġa' kkonfiguraha."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurazzjoni tal-konnessjoni"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Jekk jogħġbok imla' jew iċċekkja l-elementi t'hawn taħt"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ tal-kard"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Mem. tal-kard (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO tal-kard"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 tal-kard"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 tal-kard"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Numru tat-telefon tiegħek"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Isem tal-provider (eż. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefon tal-provider"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 tal-provider (opzjonali)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 tal-provider (opzjonali)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Agħżel il-pajjiż"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Tip ta' daljar"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Veloċità tal-konnessjoni"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Ħin biex tiskadi l-konnessjoni (sek)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login tal-kont (user name)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Password tal-kont"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "immuntar falla: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partizzjoni estiża m'hix sapportita fuq din il-pjattaforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Għandek toqba fit-tabella tal-partizzjonijiet imma ma nistax nużaha.\n"
-"L-unika soluzzjoni hija li tmexxi l-partizzjoni primarja sabiex din it-toqba "
-"tkun maġenb il-partizzjoni estiża"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restawr minn fajl %s falliet: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fajl ta' backup ħażin"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Problema waqt kitba fil-fajl %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Qed jiġri xi ħaġa ħażina fuq il-ħard disk.\n"
-"It-test biex niċċekkja l-integrità tal-informazzjoni falla.\n"
-"Dan ifisser li kull ma tikteb fuq id-diska jista' jispiċċa mimli mbarazz."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "neċessarju"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importanti"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "tajjeb ħafna"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "tajjeb"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "forsi"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Sistema ta' Printjar Komuni tal-Unix"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Ä enerazzjoni Ä dida"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Printja minngħajr kju"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Printer lokali"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Printer remot"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer fuq server CUPS remot"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer fuq server lpd remot"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Printer tan-network (TCP/socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer fuq SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer fuq server NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Daħħal URI tal-printer"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Għaddi x-xogħol lill kmand"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Mudell mhux magħruf"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Printers lokali"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Printers remoti"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " fuq port parallell \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", printer USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", apparat multi-funzjoni fuq port parallell \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", apparat multi-funzjoni fuq USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", apparat multi-funzjoni fuq HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", apparat multi-funzjoni"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", qed jipprintja fuq %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "fuq server LPD \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", server TCP/IP \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "fuq server Windows \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "fuq server Novell \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", bil-kmand %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Printer dirett (bla driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(fuq %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(fuq dan il-kompjuter)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Fuq server CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Impliċitu)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Agħżel konnessjoni tal-printer"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kif inhu mqabbad il-printer?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Il-printers li hemm fuq servers CUPS m'għandhomx bżonn jiġu ssettjati minn "
-"hawn; dawn il-printers jiġu magħrufa awtomatikament."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfigurazzjoni"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Server CUPS remot"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Għal servers CUPS remoti, m'għandekx bżonn tagħżel printer minn hawn; is-"
-"servers CUPS jinfurmaw lill-kompjuter tiegħek awtomatikament dwar il-"
-"printers li għandhom. Il-printers kollha li jaf bihom il-kompjuter tiegħek "
-"huma mniżżla taħt \"Printer impliċitu\". Agħżel liema printer minn dawn "
-"tridu jkun dak impliċitu u agħfas il-buttuna \"applika/erġa' aqra printers"
-"\". L-istess buttuna tintuża biex tara printers ġodda li saru disponibbli "
-"(tista' tieħu sa' 30 sekonda biex il-kompjuter jinduna bi printers ġodda "
-"CUPS). Meta s-server CUPS qiegħed fuq network separat, trid tagħti l-"
-"indirizz IP tas-server CUPS, u possibbilment in-numru tal-port sabiex tikseb "
-"l-informazzjoni dwar il-printers minn dan is-server, altrimenti ħalli dawn l-"
-"elementi vojta."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalment, CUPS jiġi konfigurat awtomatikament skond l-ambjent tan-network, "
-"sabiex tkun tista' taċċessa l-printers fuq network lokali. Jekk dan ma "
-"jaħdimx sew, neħħi l-marka minn \"Konfigurazzjoni awtomatika CUPS\" u rranġa "
-"l-fajl /etc/cups/cupsd.conf manwalment. Tinsiex tirristartja 'll-CUPS wara "
-"(kmand: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L-indirizz IP jidher xi ħaġa hekk: 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "In-numru tal-port irid ikun sħiħ!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "Indirizz IP tas-server CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Konfigurazzjoni CUPS awtomatika"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Qed infittex apparat..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Ittestja ports"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Żid printer ġdid"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Merħba għas-saħħar tal-konfigurazzoni tal-printer\n"
-"\n"
-"Dan is-saħħar iħallik tinstalla printers lokali jew remoti biex jintużaw "
-"minn dan il-kompjuter kif ukoll kompjuters oħra fuq in-network.\n"
-"\n"
-"Huwa jitolbok l-informazzjoni kollha meħtieġa biex tissettja l-printer u "
-"jagħtik aċċess għad-drivers tal-printers kollha disponibbli, l-għażliet tad-"
-"driver, u t-tipi ta' konnessjoni."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Printer lokali"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Merħba għas-Saħħar tal-Printers\n"
-"\n"
-"Dan is-saħħar jgħinek tinstalla l-printer/s imqabbda mal-kompjuter.\n"
-"\n"
-"Jekk jogħġbok ara li l-printer huwa mqabbad mal-kompjuter u huwa mixgħul.\n"
-"Agħfas \"Li jmiss\" meta tkun lest, jew \"Ikkanċella\" jekk ma tridx "
-"tissettja l-printer/s issa.\n"
-"\n"
-"Innota li xi kompjuters jistgħu jikkraxxjaw waqt l-għarfien awtomatiku tal-"
-"printer. Tista' titfi l-għarfien awtomatiku biex tinstalla manwalment. Uża "
-"\"Modalità esperti\" meta trid tissettja printer fuq kompjuter remot, jekk "
-"printerdrake ma jsibux awtomatikament."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Għarfien awtomatiku tal-printers"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Prosit! Il-printer tiegħek issa nstallat u konfigurat!\n"
-"\n"
-"Tista' tipprintja billi tuża l-kmand \"Print\" minn ġo l-programmi li tuża "
-"(ġeneralment taħt il-menu \"Fajl\" jew \"File\").\n"
-"\n"
-"Jekk tixtieq iżżid, tneħħi jew tibdel l-isem ta' printer, jew jekk tixtieq "
-"tbiddel is-setings impliċiti (daqs tal-karta, kwalità eċċ), agħżel \"Printer"
-"\" mis-sezzjoni \"Ħardwer\" taċ-Ċentru tal-Kontroll Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Għarfien awtomatiku tal-printers"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"PrinterDrake huwa kapaċi jagħraf printers imqabbda lokalment mal-port "
-"parallell jew USB, imma nnota li fuq xi sistema l-għarfien awtomatiku KAPAĊI "
-"JWAĦĦAL IS-SISTEMA U JIRRIŻULTA F'FILESYSTEM KORROTT. Għalhekk tagħmel dan "
-"b'riskju tiegħek.\n"
-"\n"
-"Trid li tkompli bl-għarfien awtomatiku tal-printers?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Għarfien awtomatiku"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Issettja printer manwalment"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Instab %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer fuq port parallell \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Printer USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ma nstab ebda printer lokali. Biex tinstalla printer manwalment daħħal l-"
-"isem tal-port jew fajl fl-input. (Portijiet parallelli: /dev/lp0=LPT1, /dev/"
-"lp1=LPT2 eċċ; printers USB: /dev/usb/lp0, /dev/usb/lp1 eċċ)"
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Trid iddaħħal isem ta' port jew fajl!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ebda printer lokali ma nstab!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Printers tan-network jistgħu jiġu ssettjati biss wara l-installazzjoni. "
-"Agħżel \"Ħardwer\" u mbgħad \"Printer\" miċ-Ċentru tal-Kontroll Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Biex tinstalla printer min-network, klikkja \"Ikkanċella\", aqleb għall-"
-"modalità esperti, u erġa' agħżel \"Żid printer ġdid\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Dan huwa l-printer li nstab awtomatikament. Jekk dan m'hux il-printer li "
-"ridt tissettja, daħħal isem ta' port/fajl fil-linja tal-input."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Din hija lista tal-printers kollha li nstabu awtomatikament. Jekk jogħġbok "
-"agħżel il-printer li trid tissettja, jew daħħal isem ta' port/fajl fil-linja "
-"tal-input."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Dan huwa l-printer li nstab awtomatikament. Il-konfigurazzjoni tal-printer "
-"issir awtomatikament. Jekk il-printer ma ngħarafx sew, jew jekk tippreferi "
-"konfigurazzjoni personalizzata, ixgħel \"Konfigurazzjoni manwali\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Din hija lista tal-printers kollha li nstabu awtomatikament. Jekk jogħġbok "
-"agħżel il-printer li trid tissettja. Il-konfigurazzjoni tal-printer issir "
-"awtomatikament. Jekk il-printer ma ngħarafx sew, jew jekk tippreferi "
-"konfigurazzjoni personalizzata, ixgħel \"Konfigurazzjoni manwali\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Jekk jogħġbok agħżel il-port fejn huwa mqabbad il-printer, jew agħżel isem "
-"ta' port/fajl fil-linja ta' kmand."
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Jekk jogħġbok agħżel il-port ma' fejn hu mqabbad il-printer."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (portijiet parallelli: /dev/lp0, /dev/lp1 huma ekwivalenti għal LPT1, LPT2 "
-"eċċ. L-ewwel printer USB = /dev/usb/lp0, it-tieni printer USB = /dev/usb/lp1 "
-"eċċ )"
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Trid tagħżel/iddaħħal printer/apparat!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Konfigurazzjoni manwali"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Il-printer tiegħek huwa apparat multi-funzjonali tal-HP (OfficeJet, PSC, "
-"PhotoSmart, LaserJet 1100/1200/1220/3200/3300 bi skaner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Qed ninstalla l-pakkett HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Qed niċċekkja u nikkonfigura l-apparat HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Qed ninstalla pakkett SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skannjar fuq apparat multi-funzjoni HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Qed nagħmel il-port tal-printer disponibbli għal CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Qed jinqara d-database ta' printers"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Għażliet għal printer lpd remot"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Biex tipprintja fuq printer remot lpd, trid tagħti l-isem tal-kompjuter kif "
-"ukoll l-isem tal-printer fuq dak is-server."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Isem tal-kompjuter remot"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Isem tal-printer remot"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Isem tal-kompjuter remot nieqes!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Isem tal-printer remot nieqes!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Għażliet għal printer SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Biex tipprintja fuq printer SMB, trid tagħti l-isem SMB tal-kompjuter (li\n"
-"jista' jkun differenti mill-isem TCP/IP), u possibbilment l-indirizz IP "
-"tiegħu, kif ukoll l-isem tal-printer (share name) li trid taqbad miegħu, u "
-"possibbilment l-isem u password tal-user li trid taqbad bih, u informazzjoni "
-"dwar il-workgroup."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Isem tal-kompjuter SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP tas-server SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Isem tal-printer (share)"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Workgroup"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Trid tagħti l-isem jew l-indirizz IP tas-server"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Isem tal-printer (share name) nieqes!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Għażliet tal-printer NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Biex tipprintja fuq printer NetWare, trid tagħti l-isem Netware tal-"
-"kompjuter (li\n"
-"jista' jkun differenti mill-isem TCP/IP), kif ukoll l-isem tal-kju ta' "
-"printjar li tixtieq tuża, u isem u password tal-user jekk hemm bżonn."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server tal-printer"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Isem tal-Kju tal-Ipprintjar"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Isem tas-server NCP nieqes!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Isem tal-kju NCP nieqes!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Għażliet Printer TCP/Socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Biex tipprintja fuq printer TCP jew socket, trid tissupplixxi l-isem tal-"
-"printer u possibbilment in-numru tal-port. Fuq servers HP JetDirect in-numru "
-"tal-port ġeneralment huwa 9100. Fuq printers oħra dan ivarja. Iċċekkja l-"
-"manwal tal-printer."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Isem tal-printer"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "isem tal-printer nieqes"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI tal-printer"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Tista' tispeċifika l-URI tal-printer direttament. Il-URI irid isegwi l-"
-"format tal-CUPS jew tal-Foomatic. Innota li mhux kull tip ta' URI huwa "
-"aċċettat mill-spoolers kollha."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Trid iddaħħal URI validu!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Kull printer jeħtieġ isem, (eż, \"printer\"). Id-deskrizzjoni u post "
-"m'għandhomx bżonn jimtlew. Huma kummenti għall-użu tiegħek."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Isem tal-printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Deskrizzjoni"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Post"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Qed nipprepara d-database tal-printers..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Isem tal-printer remot"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Dan tajjeb?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Agħżel user manwalment"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Għażla tal-mudell tal-printer"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Liema mudell ta' printer għandek?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Jekk jogħġbok iċċekkja li PrinterDrake sab il-mudell tal-printer tiegħek "
-"sew. Jekk il-mudell immarkat m'huwiex tajjeb jew qiegħed fuq \"printer dirett"
-"\" ara jekk issibx il-mudell int fil-lista."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Konfigurazzjoni OKI WinPrinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Konfigurazzjoni inkjet Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Setings impliċiti tal-printer\n"
-"\n"
-"Aċċerta li d-daqs tal-paġna u t-tip ta' inka/printing (jekk hemm) kif ukoll "
-"il-konfigurazzjoni tal-ħardwer tal-printer (memorja, unità dupleks, kxaxen "
-"extra) huma settjati sew. Innota li jekk tagħżel kwalità/reżoluzzjoni għolja "
-"ħafna il-printing jista' jdum ħafna iżjed u/jew juża iżjed inka."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Għażla %s trid tkun numru sħiħ!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Għażla %s trid tkun numru!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Għażla %s barra mil-limiti!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Tixtieq tissettja dan il-printer (\"%s\")\n"
-"bħala l-printer impliċitu?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Paġni biex tittestja"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Jekk jogħġbok agħżel il-paġni li trid tipprintja biex tittestja.\n"
-"Nota: Il-paġna fotografika tista' tieħu ħafna ħin biex tlesti, u fuq laser "
-"printers bi ftit memorja tista' anqas tipprintja. F'ħafna każi huwa "
-"biżżejjed li tipprintja l-paġna standard."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Ebda paġni ta' testjar"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Printja"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Paġna standard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Paġna alternattiva (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Paġna alternattiva (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Paġna fotografika"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Tipprintjax paġna għal test"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Qed nipprintja paġna/i ta' test..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Il-paġna/i intbagħatu fuq il-printer.\n"
-"Jista jgħaddi xi ftit ħin qabel jibda' l-printjar.\n"
-"Status tal-printjar:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Il-paġna/i intbagħatu fuq il-printer.\n"
-"Jista jgħaddi xi ftit ħin qabel jibda' l-printjar.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Ħadem sewwa?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Printer dirett"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Biex tipprintja fajl mil-linja ta' kmand (terminal), tista' tuża l-kmand \"%"
-"s <fajl>\" jew programm grafiku: \"xpp <fajl>\" jew \"kprinter <fajl>\". Il-"
-"programmi grafiċi jħalluk tagħżel il-printer jew tbiddel is-setings "
-"faċilment.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dan il-kmand jista' wkoll jintuża fl-element \"Printing command\" tal-window "
-"tal-ipprintjar ta' ħafna programmi, imma iddaħħalx l-isem tal-fajl hemm għax "
-"dak jissupplixxih il-programm.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Il-kmand \"%s\" iħallik ukoll tbiddel is-setings għal xogħol ta' printjar "
-"partikulari. Sempliċiment żid is-setings li trid fuq il-linja ta' kmand, eż "
-"\"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Biex tikseb lista ta' għażliet disponibbli għal dan il-printer, aqra l-lista "
-"li tidher taħt, jew agħfas il-buttuna \"Lista ta' għażliet tal-printer\". %"
-"s.\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Dawn huma l-għażliet disponibbli għal dan il-printer:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Biex tipprintja fajl mil-linja ta' kmand (terminal) uża l-kmand \"%s <fajl>"
-"\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dan il-kmand jista' wkoll jintuża fl-element \"Printing command\" tal-window "
-"tal-ipprintjar ta' ħafna programmi, imma iddaħħalx l-isem tal-fajl hemm għax "
-"dak jissupplixxih il-programm.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Biex tikseb lista ta' għażliet disponibbli għal dan il-printer agħfas il-"
-"buttuna \"Lista ta' għażliet tal-printer\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Biex tipprintja fajl mil-linja ta' kmand (terminal) uża l-kmand \"%s <fajl>"
-"\" jew \"%s <fajl>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Tista' wkull tuża l-interfaċċja grafika \"xpdq\" biex tissettja l-għażliet u "
-"biex tieħu ħsieb xogħlijiet ta' printjar.\n"
-"Jekk qed tuża l-KDE bħala ambjent tad-desktop, għandek issib ikona fuq id-"
-"desktop li tħallik twaqqaf il-printjar kollu, per eżempju jekk jeħlulek il-"
-"karti.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Il-kmandijiet \"%s\" u \"%s\" iħalluk ukoll tbiddel is-setings għal xogħol "
-"ta' printjar partikulari. Sempliċiment żid is-setings li trid fuq il-linja "
-"ta' kmand, eż \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Agħlaq"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Printjar/skannjar fuq \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Printjar fuq printer \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista ta' għażliet tal-printer"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Qed jinqara informazzjoni dwar printer..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Trasferixxi konfigurazzjoni tal-printer"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Tista' tikkopja l-konfigurazzjoni tal-printer minn spooler %s għal %s, l-"
-"ispooler attwali. L-informazzjoni kollha tal-konfigurazzjoni (isem tal-"
-"printer, deskrizzjoni, post, tip ta' konnessjoni u setings impliċiti) jiġu "
-"trasferiti, imma xogħlijiet eżistenti ta' printjar ma jiġux trasferiti.\n"
-"Mhux il-kjus kollha jistgħu jiġu trasferiti minħabba dawn ir-raġunijiet:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ma jaċċettax printers fuq servers Novell jew servers li jibgħatu d-data "
-"lill kmand \"free format\".\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ jaċċetta biss printers lokali, printers remoti LPD, u printers Socket/"
-"TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD u LPRng ma jaċċettawx printers IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Apparti minn dan, kjus li ma nħalqux b'dan il-programm jew \"foomatic-"
-"configure\" ma jistgħux jiġu trasferiti."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ukoll, printer ikkonfigurati bil-fajls PPD provduti mill-manufatturi jew bi "
-"drivers CUPS nativi ma jistgħux jiġu trasferiti."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Immarka l-printers li trid tittrasferixxi u klikkja \"Trasferixxi\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Tittrasferixxix printers"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Trasferixxi"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Printer jismu \"%s\" diġà jeżisti taħt %s.\n"
-"Klikkja \"trasferixxi\" biex tħassar li hemm.\n"
-"Tista' wkoll tagħtih isem ġdid jew taqbżu."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "L-isem tal-printer jista' jkun fih biss ittri, numri, u underscore"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"il-printer \"%s\" diġà jeżisti. \n"
-"Trid tħassar il-konfigurazzjoni tiegħu?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Isem tal-printer Ä¡did"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Qed nittrasferixxi %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Int ittrasferixxejt il-printer li kien impliċitu qabel (\"%s\"). Trid li "
-"jerġa' jkun il-printer impliċitu taħt is-sistema l-ġdida %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Qed nerġa' naqra' l-printers..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfigurazzjoni ta' printer remot"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Qed nibda' n-network..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Ikkonfigura n-network issa"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Funzjonalità tan-network m'hix konfigurata"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Qed tipprova tissettja printer remot. Dan għandu bżonn aċċess għan-network, "
-"imma s'issa ma ġietx issettjata n-network. Jekk tkompli minngħajr network, "
-"għandu mnejn ma tkunx tuża l-printer li qed tissettja issa. Kif trid "
-"tipproċedi?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Kompli kkonfigura mingħajr network"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Il-konfigurazzjoni tan-network li saret waqt l-installazzjoni ma tistax "
-"tittella' issa. Jekk jogħġbok iċċekkja jekk in-network isirx aċċessibbli "
-"wara li tirristartja s-sistema, imbgħad ikkoreġi l-konfigurazzjoni miċ-"
-"Ċentru tal-Kontroll Mandrake, taħt is-sezzjoni \"Network u Internet\"/"
-"\"Konnessjoni\", u wara ssettja l-printer, mill-istess ÄŠentru tal-Kontroll, "
-"sezzjoni \"Ħardwer\"/\"Printer\"."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"L-aċċess għan-network ma kienx qed jaħdem u ma setax jittella'. Jekk "
-"jogħġbok iċċekkja l-konfigurazzjoni tal-ħardwer, imbgħad erġa' pprova "
-"kkonfigura l-printer remot."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Qed nirristartja s-sistema ta' printjar..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "għoli"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranojd"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Qed ninstalla sistema ta' printjar taħt livell ta' sigurtà %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Se tinstalla s-sistema ta' printjar %s fuq sistema li għandha l-livell ta' "
-"sigurtà %s.\n"
-"\n"
-"Din is-sistema ta' printjar tħaddem daemon (proċess fl-isfond) li jistenna' "
-"xogħlijiet ta' printjar u jieħu ħsiebhom. Dan id-daemon huwa wkoll "
-"aċċessibbli minn kompjuters oħra fuq in-network għalhekk huwa possibbli għal "
-"attikki fuqu. Għalhekk, id-daemons li jittellgħu f'dan il-livell huma ftit u "
-"magħżula sew.\n"
-"\n"
-"Żgur li trid tikkonfigura l-ipprintjar fuq dan il-kompjuter?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Qed nistartja s-sistema ta' printjar waqt ix-xegħil"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Is-sistema ta' printjar (%s) mhux se jittella' awtomatikament meta tixgħel "
-"il-kompjuter.\n"
-"\n"
-"Huwa possibbli t-tlugħ awtomatiku ġie mitfi meta bdilt il-livell ta' sigurtà "
-"ogħla, peress li s-sistema ta' printjar huwa punt fejn possibbilment isiru "
-"attakki.\n"
-"\n"
-"Trid li terġa' tixgħel it-tlugħ awtomatiku tas-sistema ta' printjar?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Qed niċċekkja s-softwer li hemm installat..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Qed inneħħi LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Qed inneħħi LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Agħżel \"spooler\" tal-printer"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Liema sistema ta' printjar (spooler) tixtieq tuża?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Qed nikkonfigura l-printer \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Qed ninstalla Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Għażliet tal-printer"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Qed jiġi preparat PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Qed nikkonfigura l-printer \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Tixtieq tissettja l-printing?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistema ta' pprintjar: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Dawn huma l-printers ikkonfigurati. Klikkja-djoppju fuq printer biex "
-"tbiddillu l-konfigurazzjoni, biex tissettjah bħala printer impliċitu, jew "
-"tara informazzjoni dwaru."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Dawn huma l-printers ikkonfigurati. Klikkja-djoppju fuq printer biex "
-"tbiddillu l-konfigurazzjoni, biex tissettjah bħala printer impliċitu, jew "
-"tara informazzjoni dwaru."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Erġa' aqra l-lista ta' printers (biex issib printers remoti CUPS)"
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Ikkonfigura sistema tal-ipprintjar"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modalità normali"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Trid tikkonfigura dan il-printer?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Biddel il-konfigurazzjoni tal-printer"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Xi trid tagħmel b'dan il-printer?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Agħmel dan!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tip ta' konnessjoni tal-printer"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Isem, deskrizzjoni u fejn qiegħed il-printer"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Ditta, mudell u driver tal-printer"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Ditta u mudell tal-printer"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Nissettja dan bħala l-printer impliċitu"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Nipprintja paġni biex nittestja"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Inkun naf kif nuża dan il-printer"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Neħħi printer"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Qed inneħħi l-printer antik \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Printer impliċitu"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Il-printer \"%s\" issa ssettjat bħala printer impliċitu"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Żgur li trid tneħħi l-printer \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Qed jitneħħa printer \"%s\"..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfigurazzjoni tal-proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Merħba għall-għodda tal-konfigurazzjoni tal-proxy.\n"
-"\n"
-"Hawn, tista' tissettja l-proxies ftp u http, bil-\n"
-"login u password jew minngħajrhom.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Jekk jogħġbok imla' l-informazzjoni dwar il-proxy http.\n"
-"Ħallihom vojta jekk ma tridx proxy http."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url irid jibda' b' \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Il-parti tal-port trid tkun numerika"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Jekk jogħġbok imla' l-informazzjoni dwar il-proxy ftp.\n"
-"Ħallihom vojta jekk ma tridx proxy ftp."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url irid jibda' b' \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Jekk jogħġbok daħħal il-login u password tal-proxy, jekk hemm.\n"
-"Ħallihom vojta jekk ma tridx login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "password"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "erġa ttajpja password"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Il-passwords ma jaqblux. Erġa' pprova!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ma nistax inżid partizzjoni fuq RAID _formattjat_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ma nistax nikteb fajl %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid falla"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid falla (forsi raidtools m'hux installat?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "M'hemmx biżżejjed partizzjonijiet għal RAID livell %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ħaddem is-sistema tal-awdjo ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron iħaddem kmandijiet perjodikament."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd jintuża biex tiċċekkja l-istatus tal-batterija ta' laptop u żżomm\n"
-"rikordju fis-syslog. Jista jintuża wkoll biex jintefa' awtomatikament\n"
-"beta l-batterija titbaxxa wisq."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Iħaddem kmandijiet li jiġu appuntati mill-kmand \"at\" fil-ħin speċifikat\n"
-"meta tħaddem \"at\", u jħaddem programmi meta t-tagħbija tas-sistema tkun\n"
-"baxxa biżżejjed."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron huwa programm standard tal-UNIX li jħaddem programmi speċifikati \n"
-"mill-user f'ħinijiet speċifiċi. Vixie cron iżid numru ta' fattizzi lill-\n"
-"cron bażiku tal-UNIX, inkluż sigurtà aħjar u konfigurazzjoni iżjed "
-"b'saħħitha."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM jippermetti l-użu tal-maws fi programmi non-grafiċi bħall-Midnight\n"
-"Commander. Jippermetti wkoll ikkopjar ta' test u menus popup fil-konsol."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake iħaddem inkjesta tal-ħardwer, u jista' jsib u \n"
-"jikkonfigura apparat ġdid li twaħħal."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache huwa server tal-web. Huwa jista' joffri fajls HTML u CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Id-daemon tal-internet \"superserver\" (magħruf bħala inetd) itella'\n"
-"varjetà ta' servizzi oħra tal-internet skond il-ħtieġa. Huwa responsabbli\n"
-"li jtella' diversi servizzi, inkluż telnet, ftp, rsh u rlogin. Jekk tneħħi\n"
-"lill-inetd tkun neħħejt is-servizzi kollha tiegħu."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Ħaddem filtering ta' pakketti għall-kernel verżjoni 2.2 tal-Linux,\n"
-"biex tissettja firewall biex tipproteġi l-kompjuter minn attakki \n"
-"min-network"
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dan il-pakkett itella' t-tqassim tat-tastiera kif konfigurat f'\n"
-"/etc/sysconfig/keyboard.  Dan jista' jiġi ssettjat bil-programm kbdconfig.\n"
-"Dan għandu jibqa' ssettjat għal ħafna magni."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Riġenerazzjoni awtomatika tal-headers tal-kernel ġewwa\n"
-"/boot għal /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Għarfien u konfigurazzjoni ta' apparat ġdid meta tixgħel."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Il-programm Linuxconf ġieli jagħmel diversi xogħlijiet waqt li qed\n"
-"jitla' l-kompjuter biex imantni l-konfigurazzjoni."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd huwa daemon tal-ipprintjar li huwa meħtieġ biex jaħdem sew l-lpr.\n"
-"Huwa bażikament server li jqassam xogħol ta' pprintjar lill-printer/s."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, li jintuża biex tibni servers kbar u \n"
-"effiċjenti ħafna."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) huwa \"Domain Name Server\" (DNS) li jirrisolvi l-indirizz IP "
-"minn isem ta' kompjuter."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Jimmonta u jiżmonta l-filesystems kollha NFS (Unix/Linux), \n"
-"SMB (LANmanager/Windows) jew NCP (Netware)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Itella' jew iwaqqaf l-interfaċċji kollha tan-network li qegħdin \n"
-"konfigurati biex jitilgħu meta tixgħel."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS huwa protokoll popolari għal qsim ta' fajls fuq networks TCP/IP. \n"
-"Dan is-servizz jipprovdi funzjonalità ta' server NFS, li jiġi konfigurat \n"
-"mill-fajl /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS huwa protokoll popolari għal qsim ta' fajls fuq networks \n"
-"TCP/IP. Dan il-modulu jipprovdi faċilità li ssakkar fajls bl-NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Awtomatikament ixgħel in-\"numlock\" taħt il-konsol u XFree \n"
-"meta tixgħel"
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Jippermetti l-użu tal-Oki4w \"win-printer\" jew kompatibbli"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Il-PCMCIA normalment jintuża għal kards tan-network jew modems fuq \n"
-"kompjuters laptop. Dan ma jittellax jekk ma jkunx konfigurat għalhekk \n"
-"m'hux problema jekk tħallih fuq kompjuters li m'għandhomx bżonnu."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Il-portmapper jimmaniġġja konnessjonijiet RPC, li jintużaw minn \n"
-"protokolli bħal NFS u NIS. Is-server portmap irid ikun qed jaħdem fuq\n"
-"kompjuters li jaġixxu bħala servers għal protokolli li jużaw il-\n"
-"mekkaniżmu RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix huwa aġent tat-trasport tal-imejl, ċioè programm li jgħaddi imejls "
-"minn kompjuter għall-ieħor."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Jikteb u jirrestawra blokka ta' entropija għall-ġenerazzjoni ta' \n"
-"numri bil-polza iżjed randomi."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Jassenja apparat \"raw\" lill apparat \"block\" (bħal partizzjoni tal-ħard "
-"disk), għal programmi bħall-Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Id-daemon routed jippermetti lit-tabella tar-\"routing\" li tiġi\n"
-"aġġornata awtomatikament bil-protokoll RIP. Filwaqt li l-protokoll RIP\n"
-"huwa komuni fuq networks żgħar, huma meħtieġa protokolli ta' routing\n"
-"iżjed sofistikati fuq networks kumplikati."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Il-protokoll rstat jippermetti users fuq network li jiksbu\n"
-"informazzjoni dwar l-effiċjenza ta' kull magna fuq dan in-network."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Il-protokoll rusers jippermetti lill users fuq network li jidentifikaw\n"
-"min qiegħed illoggjat fuq magni oħra."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Il-protokoll rwho jippermetti lill user remot li jikseb lista \n"
-"tal-users kollha li qegħdin konnessi mal-kompjuter (simili għal finger)"
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Ħaddem is-sistema awdjo fuq il-kompjuter"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog huwa faċilità li permezz tagħha d-daemons jistgħu iżommu\n"
-"log ta' messaġġi. Dejjem huwa rakkomandat li tħaddem 'is-syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Tella' d-drivers għall-apparat usb"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Itella' l-\"X Font Server\" (dan huwa meħtieġ biex jaħdem l-XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Agħżel liema servizzi għandhom jittellgħu awtomatikament meta tixgħel"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Printjar"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Qsim ta' fajls"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Amministrazzjoni remota"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server Database"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servizzi: %d imtella' għal %d reġistrati"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servizzi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "imtella'"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "imwaqqaf"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servizzi u daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"M'hemmx iżjed informazzjoni\n"
-"dwar dan l-apparat, jiddispjaċini."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Malli tixgħel"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Ibda"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Ieqaf"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Grazzi talli għażilt Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Merħba għad-dinja Sors Miftuħ"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Is-suċċess ta' MandrakeSoft huwa bbażat fuq il-prinċipju ta' Softwer Ħieles. "
-"Is-sistema operattiva ġdida tiegħek hija frott il-ħidma u koperazzjoni min-"
-"naħa tal-kommunità dinjija tal-Linux."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Ingħaqad mad-dinja ta' Softwer Ħieles"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Sir af lill-kommunità Sors Miftuħ u sir membru. Tgħallem, għallem u għin "
-"lill-oħrajn billi tingħaqad fid-diversi fora li ssib fuq il-paġni tal-web "
-"għall-kommunità tagħna."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet u Messaġġi"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 jipprovdi l-aqwa softwer biex taċċessa kollux li "
-"joffrilek l-internet. Brawżja l-web u ara animazzjonijiet bil-Mozilla u "
-"Konqueror, ibgħat imejl u organizza l-informazzjoni personali tiegħek bl-"
-"Evolution u KMail, u ħafna iżjed!"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia u Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 iħallik tħaddem il-kompjuter multimedia tiegħek sal-"
-"limiti! Uża l-aħħar programmi biex tisma' mużika u awdjo, editja u organizza "
-"ritratti u stampi, ara TV u videos, u ħafna iżjed"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Żviluppar"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 huwa l-aqwa pjattaforma għall-iżviluppar. Skopri l-qawwa "
-"tal-kompilatur GNU gcc kif ukoll l-aqwa ambjenti ta' żviluppar Sors Miftuħ."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "ÄŠentru tal-Kontroll Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Iċ-Ċentru tal-Kontroll Mandrake Linux huwa post wieħed minn fejn tista' "
-"tippersonalizza u tikkonfigura s-sistema Mandrake tiegħek"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "User interfaces"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 jipprovdilek 11-il ambjent tad-destkop grafiku mnejn "
-"tagħżel, inkluż GNOME 1.4, KDE 2.2.2, WindowMaker 0.8 u oħrajn"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Programmi għal Server"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Ibdel il-kompjuter tiegħel f'server b'saħħtu bi ftit azzjonijiet tal-maws: "
-"Servers tal-web, imejl, firewall, router, fajls u printjar, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Logħob"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 joffri l-aħjar logħbiet b'sors miftuħ - arcade, azzjoni, "
-"karti, sports, strateġija..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Tixtieq titgħallem il-Linux b'mod sempliċi, malajr u b'xejn? MandrakeSoft "
-"jipprovdu stħarriġ fuq il-Linux, kif ukoll mezz biex tittestja l-progress "
-"tiegħek fuq MandrakeCampus - iċ-ċentru ta' taħriġ elettroniku tagħna"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Għajnuna ta' kwalità mill-Komunità Linux, u minngħand MandrakeSoft, huwa "
-"pass 'il bogħod. U jekk int diġà veteran tal-Linux, tista' ssir \"Espert\" u "
-"taqsam it-tagħlim tiegħek fil-website ta' sapport tagħna."
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Għall-proġetti kollha tal-IT tiegħek, il-konsulenti tagħna lesti janalizzaw "
-"il-ħtiġijiet tiegħek u joffrulek soluzzjoni personalizzata. Ibbenefika mill-"
-"esperjenza vasta ta' MandrakeSoft bħala produttur tal-Linux biex tipprovdi "
-"soluzzjoni sħiħa alternattiva għad-ditta tiegħek"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Varjetà sħiħa ta' soluzzjonijiet bil-Linux, kif ukoll offerti speċjali fuq "
-"il-prodotti huma disponibbli online fuq il-ħanut elettroniku tagħna."
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-#, fuzzy
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Għal iżjed tagħrif dwar is-servizzi professjonali ta' MandrakeSoft kif ukoll "
-"offerti kummerċjali, jekk jogħġbok ċemplilna fuq in-numru \"toll-free\" li "
-"tara hawn:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Qed ninstalla pakketti..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ma nistax naqra t-tabella tal-partizzjoni - hija mħarbta wisq :(\n"
-"Ħa nipprova nkompli nneħħi partizzjonijet ħżiena"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Problema!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ma nistax insib il-fajl \"image\" meħtieġ \"%s\""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Konfiguratur Awto-Installazzjoni"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Int issa se tikkonfigura floppy Awto-installazzjoni. Din il-faċilità tista' "
-"tkun perikoluża u trid tintuża bil-galbu.\n"
-"\n"
-"B'din il-faċilità tista' tirrepeti l-installazzjoni li għamilt fuq dan il-"
-"kompjuter, filwaqt li tiġi mistoqsi dwar ċerti passi biex tbiddillhom il-"
-"valur.\n"
-"\n"
-"Għal sigurtà massima, il-partizzjoni u formattjar tal-ħard disk qatt ma "
-"jsiru awtomatikament, tagħżel x'tagħżel waqt l-installazzjoni tal-"
-"kompjuter.\n"
-"\n"
-"Trid tkompli?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Passi tal-Konfigurazzjoni Awtomatika"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Jekk jogħġbok agħżel għal kull pass, jekk tridhiex tkun bħal din l-"
-"installazzjoni, jew tkunx manwali"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Merħba.\n"
-"\n"
-"Il-parametri għall-awto-installazzjoni jinstabu fil-parti tax-xellug."
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Prosit!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Il-floppy Ä¡ie Ä¡enerat kif mitlub.\n"
-"Issa tista' tirrepeti l-installazzjoni."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Awto-installazzjoni"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Żid element"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Neħħi l-aħħar element"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                     Rapport DrakBackup\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    Rapport tad-daemon DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                 Dettalji tar-Rapport DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progress totali"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Ħu backup ta' fajls tas-sistema..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Fajls ta' backup fil-ħard disk..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Ħu backup ta' fajls tal-users..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Progress tal-backup lill-ħard disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Ħu backup ta' fajls oħrajn..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"lista ta' fajls mibgħuta bl-FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problema fil-konnessjoni FTP. Ma kienx possibbli nibgħat il-fajls bl-"
-"FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Problema biex jintbagħat imejl. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Għażla ta' fajls"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Agħżel fajls jew direttorju u klikkja \"Żid\""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Jekk jogħġbok immarka l-għażliet kollha li għandek bżonn.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Dawn l-għażliet jieħdu backup u jirrestawraw il-fajls kollha tad-direttorju /"
-"etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Ħu backup tal-fajls tas-sistema (direttorju /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Uża backups inkrementali  (tħassarx l-antiki)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Tinkludix fajls kritiċi (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"B'din l-għażla tkun tista' tirrestawra kwalinkwa verżjoni\n"
-"tad-direttorju /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Jekk jogħġbok agħżel il-users kollha li trid tinkludi f'dan il-backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Tinkludix il-cache tal-browser"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Uża backups inkrementali  (tħassarx l-antiki)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Neħħi l-magħżula"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Users"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Uża konnessjoni FTP għall-backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Jekk jogħġbok daħħal l-isem jew IP tal-kompjuter."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Jekk jogħġbok daħħal id-direttorju fejn\n"
-" trid tpoġġi l-backup fuq il-kompjuter."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Jekk jogħġbok daħħal il-login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Jekk jogħġbok daħħal il-password"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Ftakar dan il-password"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Konnessjoni FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Konnessjoni żgura"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Uża CD/DVDROM għall-backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Jekk jogħġbok agħżel id-daqs tas-CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Jekk jogħġbok immarka hawn jekk qed tuża medja CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Jekk jogħġbok immarka hawn jekk trid tħassar is-CDRW qabel"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Jekk jogħġbok immarka hawn jekk trid tinkludi\n"
-" boot tal-installazzoni fuq is-CD."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Jekk jogħġbok daħħal l-isem tal-apparat CD Writer\n"
-" eż: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Uża tape għall-backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Jekk jogħġbok daħħal l-isem tal-apparat għall-backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Jekk jogħġbok daħħal id-daqs massimu\n"
-" permess għal DrakBackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Jekk jogħġbok daħħal id-direttorju fejn tikteb:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Uża kwota għall-fajls tal-backup."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Network"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Ħard disk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "kull siegħa"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "kuljum"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "kull ġimgħa"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "kull xahar"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Uża daemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Jekk jogħġbok agħżel l-intervall\n"
-"ta' ħin għal kull backup"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Jekk jogħġbok agħżel\n"
-"il-medja għall-backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Uża ħard disk bid-daemon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Uża FTP bid-daemon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Aċċerta li d-daemon \"cron\" huwa nkluż fis-servizzi."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Ibgħat rapport bl-imejl wara kull backup lill:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Xiex"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Fejn"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Meta"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Iżjed għażliet"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Konfigurazzjoni DrakBackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Jekk jogħġbok agħżel fejn trid tieħu backup"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "fuq ħard disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "fuq in-network"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Jekk jogħġbok agħżel ta' xiex trid tieħu backup"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Ħu backup tas-sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Ħu backup tal-users"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Agħżel user manwalment"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sorsi tal-backup: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Fajls tas-sistema:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Fajls tal-user:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Fajls oħrajn:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Ikteb fuq ħard disk fid-direttorju : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Ikteb bl-FTP fuq kompjuter : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t isem ta' user: %s\n"
-"\t\t fuq direttorju: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Għażliet:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tTinkludix fajls tas-sistema\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackups jużaw tar u bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackups jużaw tar u gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) include :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Ħard disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Network bl-FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Network bl-SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ebda konfigurazzjoni, agħżel Saħħar jew Avvanzat\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista ta' informazzjoni x'tirrestawra:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista ta' informazzjoni korrotta:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Jekk jogħġbok neħħiha d-darba li jmiss."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Fajls tal-backup Ä¡ew korrotti"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "           L-informazzjoni kollha magħżula ġiet..........."
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "         restawrata għal fuq %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "      Konfigurazzjoni ta' restawr....."
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK biex tirrestawra fajls oħra."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista ta' users x'tirrestawra (l-iżjed data riċenti ta' kull user biss "
-"importanti)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Ħu backup ta' fajls tas-sistema qabel:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "jekk jogħġbok agħżel data biex tirrestawra"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Uża ħard disk għal backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Irrestawra mill-ħard disk"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Jekk jogħġbok daħħal id-direttorju fejn qegħdin il-backups"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Agħżel media ieħor biex tirrestawra minnu"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Media oħrajn"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Irrestawra sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Irrestawra users"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Irrestawra ieħor"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Agħżel direttorju biex tirrestawra (minnflok / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Agħmel backup ġdid qabel tirrestawra (għal backups inkrementali biss)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Neħħi d-direttorji tal-users qabel tirrestawra."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Irrestawra l-backups kollha"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Restawr personalizzat"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Għajnuna"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Ta' qabel"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Ikteb"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Ibni backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Irrestawra"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Li jmiss"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Jekk jogħġbok ibni backup qabel tirrestawraha...\n"
-" jew ivverifika li d-direttorju huwa tajjeb."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Problema waqt sendmail\n"
-"  ir-rapport ma ntbagħatx.\n"
-"  Jekk jogħġbok ikkonfigura s-sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista ta' pakketti x'tinstalla"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Problema biex jintbagħat fajl bl-FTP.\n"
-" Jekk jogħġbok ikkoreġi l-konfigurazzjoni FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Jekk jogħġbok agħżel informazzjoni x'tirrestawra"
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Jekk jogħġbok agħżel media għall-backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Jekk jogħġbok agħżel informazzjoni x'tikkopja"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ebda fajl ta' konfigurazzjoni ma nstab.\n"
-"Agħżel Saħħar jew Avvanzat."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Qed jiġi żviluppat... stenna ftit."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Ħu backup tal-fajls tas-sistema"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Ħu backup tal-fajls tal-users"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Ħu backup ta' fajls oħrajn"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Progress totali"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "qed jintbagħatu fajls bl-FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Qed nibgħat fajls..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista ta' informazzjoni x'tinkludi fuq is-CDROM"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Jekk jogħġbok daħħal il-veloċità tas-CD Writer"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Jekk jogħġbok daħħal l-isem tal-apparat tas-CD Writer (eż, 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-"Jekk jogħġbok ittikkja jekk trid tinkludi \"boot\" tal-installazzjoni fuq is-"
-"CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Ħu backup issa minn fajl ta' konfigurazzjoni"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ara Konfigurazzjoni Backup."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Konfigurazzjoni b'Saħħar"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Konfigurazzjoni Avvanzata"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Ħu Backup Issa"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"deskrizzjoni ta' l-għażliet:\n"
-"\n"
-" F'dan il-pass Drakbackup iħallik tbiddel:\n"
-"\n"
-" - It-tip ta' kompressar:\n"
-"    \n"
-"      Jekk tagħżel kompressar bzip2, tikkompressa l-\n"
-"      informazzjoni tiġi kompressata aħjar minn gzip (madwar \n"
-"      2-10 %). Din l-għażla mhijiex magħżula impliċitament \n"
-"      għax tieħu iżjed ħin (madwar 1000% iżjed).\n"
-"\n"
-" - Modalità aġġornament:\n"
-"\n"
-"      Din l-għażla taġġornalek backup, imma m'hijiex utli \n"
-"      ħafna għax trid terġa' tiftaħ il-backup kollu biex \n"
-"      taġġornah.\n"
-"\n"
-" - Modalità \".backupignore\":\n"
-"\n"
-"      Simili għas-CVS, Drakbackup jaqbeż dawk ir-riferenzi \n"
-"      kollha li hemm fil-fajls .backupignore f'kull direttorju.\n"
-"      eż:\n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Xi problemi waqt sendmail huma kkawżati minn konfigurazzjoni\n"
-" ħażina ta' postfix. Biex issolviha trid tissettja myhostname \n"
-" jew mydomain fil-fajl /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"deskrizzjoni ta' l-għażliet:\n"
-"\n"
-" - Ħu backup tal-fajls tas-sistema:\n"
-"\n"
-"\tDin l-għażla tħallik tieħu kopja tad-direttorju /etc,\n"
-"\tli fih il-fajls kollha tal-konfigurazzjoni tas-sistema.\n"
-"\tJekk jogħġbok oqgħod attent waqt il-pass ta' restawr li\n"
-"\tma tħassarx:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Ħu backup tal-fajls tal-users:\n"
-"\n"
-"\tDin l-għażla tħallik tagħżel il-users kollha li trid tieħu\n"
-"\tbackup tagħhom. Biex tnaqqas l-ispazju li jintuża, mhux \n"
-"\trakkomandat li tinkludi l-cache tal-web browser.\n"
-"\n"
-" - Ħu backup ta' fajls oħra:\n"
-"\tDin l-għażla tħallik iżżid informazzjoni oħra x'tikkopja.\n"
-"\tB'dan il-backup m'hux possibbli tagħżel \"backup inkrementali\"\n"
-"\tgħalissa.\n"
-"\n"
-" - Backup inkrementali:\n"
-"\n"
-"\tIl-backup inkrementali huwa l-iżjed metodu b'saħħtu \n"
-"\tgħall-backups. Din l-għażla tħallik tieħu backup tal-\n"
-"\tinformazzjoni kollha l-ewwel darba, u wara tieħu kopja\n"
-"\tbiss ta' dak li nbidel.\n"
-"\tWara, tkun tista', waqt il-pass ta' restawr, li\n"
-"\ttirrestawra biss dak li nbidel minn Ä‹ertu data.\n"
-"\tJekk qatt ma għażilt din l-għażla qabel, il-backups\n"
-"\tantiki kollha jiġu mħassra qabel kull backup.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"deskrizzjoni tar-restawr:\n"
-"\n"
-"L-iżjed data riċenti biss tintuża, għax bil-backups inkrementali\n"
-"huwa neċessarju li tirrestawra l-backups antiki wieħed wieħed.\n"
-"\n"
-"Għalhekk jekk ma tridx tirrestawra user jekk jogħġbok neħħi l-marka miċ-"
-"checkbox tiegħu.\n"
-"\n"
-"Altrimenti, tista' tagħżel biss wieħed minn dawn:\n"
-"\n"
-" - Backups inkrementali\n"
-"\n"
-"\tIl-backup inkrementali huwa l-iżjed metodu b'saħħtu \n"
-"\tgħall-backups. Din l-għażla tħallik tieħu backup tal-\n"
-"\tinformazzjoni kollha l-ewwel darba, u wara tieħu kopja\n"
-"\tbiss ta' dak li nbidel.\n"
-"\tGħalhekk huwa possibbli waqt il-pass ta' restawr, li\n"
-"\ttirrestawra biss dak li nbidel minn Ä‹ertu data.\n"
-"\tJekk qatt ma għażilt din l-għażla qabel, il-backups\n"
-"\tantiki kollha jiġu mħassra qabel kull backup.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft ta' DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Dan il-programm huwa softwer ħieles; tista' tiddistribwih u/jew tibdlu\n"
-" skond it-termini tal-Liċenzja Ġenerali Pubblika (GPL) GNU, kif "
-"ippubblikata\n"
-" mill-Free Software Foundation; jew verjoni 2 tal-liċenzja, jew (skond il-\n"
-" ġudizzju tiegħek) waħda iżjed riċenti.\n"
-"\n"
-" Dan il-programm huwa distribwit bl-isperanza li jkun utli, imma\n"
-" MINNGĦAJR EBDA GARANZIJA; minngħajr saħansitra l-garanzija impliċita \n"
-" ta' MERKANTABILITÀ jew LI HU ADEGWAT GĦAL UZU PARTIKULARI. Ara\n"
-" l-Liċenzja Ġenerali Pubblika GNU (GNU General Public License) għal iżjed\n"
-" dettalji.\n"
-"\n"
-" Għandek tirċievi kopja tal-Liċenzja Ġenerali Pubblika GNU flimkien ma' dan\n"
-" il-programm. Jekk le, ikteb lill-Free Software Foundation, Inc., \n"
-" 59, Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Deskrizzjoni:\n"
-"\n"
-"  Drakbackup jintuża biex jieħu kopja \"backup\" tas-sistema.\n"
-"  Waqt il-konfigurazzjoni tista' tagħżel \n"
-"\t- Fajls tas-sistema, \n"
-"\t- Fajls tal-users, \n"
-"\t- Fajls oħrajn\n"
-"\tjew Sistema kollha ... u Oħrajn (bħal partizzjonijiet tal-Windows)\n"
-"\n"
-"  Drakbackup iħallik tpoġġi din il-backup fuq:\n"
-"\t- Ħard disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (bl-autoboot, rescue u awto-installazzjoni).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup iħallik tirrestawra s-sistema għal ġo direttorju\n"
-"  li jagħżel il-user.\n"
-"\n"
-"  Impliċitament, il-backups jitpoġġew fid-direttorju\n"
-"  /var/lib/drakbackup\n"
-"\n"
-"  fajl ta' konfigurazzjoni:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Pass ta' restawrazzjoni:\n"
-"\n"
-"  Waqt il-pass ta' restawrazzjoni, Drakbackup iħassar id-\n"
-"  direttorju oriġinali u jivverifika li l-fajls tal-backup\n"
-"  ma ġewx korrotti. Huwa rakkomandat li tieħu backup ieħor\n"
-"  qabel tibda' tirrestawra.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"deskrizzjoni tal-għażliet:\n"
-"\n"
-"Jekk jogħġbok oqgħod attent meta tuża backup bl-ftp, għax\n"
-"dawk il-backups li huma mibnija biss jintbagħatu fuq is-server.\n"
-"Għalhekk għalissa, trid tibni l-backup fuq il-ħard disk qabel\n"
-"jintbagħat lis-server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemi ta' restawr ta' backup:\n"
-"\n"
-"Waqt il-pass ta' restawr, Drakbackup jivverifika l-fajls \n"
-"kollha tal-backup qabel jirrestawrahom. Qabel \n"
-"ir-restawr,.Drakbackup ineħħi d-direttorju oriġinali, u \n"
-"tista' titlef l-informazzjoni kollha. Huwa mportanti li\n"
-"toqgħod attent u ma tbiddilx il-fajls tal-backup manwalment.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Deskrizzjoni:\n"
-"\n"
-"  Drakbackup jintuża biex jieħu kopja \"backup\" tas-sistema.\n"
-"  Waqt il-konfigurazzjoni tista' tagħżel \n"
-"\t- Fajls tas-sistema, \n"
-"\t- Fajls tal-users, \n"
-"\t- Fajls oħrajn\n"
-"\tjew Sistema kollha ... u Oħrajn (bħal partizzjonijiet tal-Windows)\n"
-"\n"
-"  Drakbackup iħallik tpoġġi din il-backup fuq:\n"
-"\t- Ħard disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (bl-autoboot, rescue u awto-installazzjoni).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup iħallik tirrestawra s-sistema għal ġo direttorju\n"
-"  li jagħżel il-user.\n"
-"\n"
-"  Impliċitament, il-backups jitpoġġew fid-direttorju\n"
-"  /var/lib/drakbackup\n"
-"\n"
-"  fajl ta' konfigurazzjoni:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Pass ta' restawrazzjoni:\n"
-"\n"
-"  Waqt il-pass ta' restawrazzjoni, Drakbackup iħassar id-\n"
-"  direttorju oriġinali u jivverifika li l-fajls tal-backup\n"
-"  ma ġewx korrotti. Huwa rakkomandat li tieħu backup ieħor\n"
-"  qabel tibda' tirrestawra.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "L-installazzjoni ta' %s falliet. Dan kien il-messaġġ:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Fittex fonts installati"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Neħħi l-marka minn fonts installati"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "fittex fonts kollha"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "ma stabux fonts"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "lest"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ma stajtx insib fonts fuq il-partizzjonijiet immuntati"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Erġa' agħżel fonts tajbin"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ma stajtx insib fonts.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Fittex fonts fil-lista ta' nstallati"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Ikkupjar ta' fonts"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installazzjoni ta' fonts TrueType"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "stenna sakemm għaddej ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installazzjoni TrueType lest"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverżjoni ta' fonts"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "qed nibni type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Riferenzi għall-Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Konverżjoni ta' fonts ttf"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Konverżjoni ta' fonts pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Issopprimi fajls temporanji"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Irristartja XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Issopprimi fajls ta' fonts"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "ristartja l-xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Qabel tinstalla fonts, kun ċert li għandek id-dritt tużahom u tinstallahom "
-"fuq is-sistema.\n"
-"\n"
-"-Tista' tinstalla fonts bis-sistema normali. F'każi rari, fonts ħżiena "
-"jistgħu iwaħħlulek is-server X."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importazzjoni ta' fonts"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Ä ib fonts mill-Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Neħħi fonts"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Għażliet avvanzati"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista ta' fonts"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Agħżel il-programmi li se jużaw il-fonts :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Printers ġeneriċi"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Agħżel il-fajl tal-font jew direttorju u agħfas \"Żid\""
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installa lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Klikkja hawn jekk inti Ä‹ert"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Klikkja hawn jekk m'intix Ä‹ert."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Xejn magħżul"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Kollox magħżul"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Neħħi lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Testijiet preliminari"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Ikkopja fonts għas-sistema"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installa u kkonverti fonts"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Wara l-installazzjoni"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Neħħi fonts mis-sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Wara t-tneħħija"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Qsim tal-konnessjoni tal-internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Il-qsim tal-konnessjoni tal-internet huwa mixgħul"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il-konfigurazzjoni tal-qsim tal-konnessjoni tal-internet diġà sar.\n"
-"Bħalissa huwa mixgħul.\n"
-"\n"
-"X'tixtieq tagħmel?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "itfi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ikkanċella"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ri-konfigura"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Qed inniżżel is-servers..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Il-qsim tal-konnessjoni tal-internet issa mitfi"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Il-qsim tal-konnessjoni tal-internet huwa mitfi"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Il-konfigurazzjoni tal-qsim tal-konnessjoni tal-internet diġà sar.\n"
-"Bħalissa huwa mitfi.\n"
-"\n"
-"X'tixtieq tagħmel?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ħaddem"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Qed intella' s-servers..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Qsim tal-konnessjoni tal-internet issa mixgħul."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Se tikkonfigura l-kompjuter biex jaqsam il-konnessjoni tal-internet.\n"
-"B'din il-faċilità, kompjuters oħra fuq in-network tiegħek ikunu jistgħu "
-"jużaw il-konnessjoni mal-internet ta' dan il-kompjuter.\n"
-"\n"
-"Nota: irid ikollok adattur tal-internet dedikat biex tissettja n-network "
-"lokali (LAN)"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaċċja %s (tuża modulu %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaċċja %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ebda adattur tan-network fuq is-sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ebda adattur tan-network ethernet ma nstab fuq is-sistema tiegħek. Jekk "
-"jogħġbok ħaddem l-għodda tal-konfigurazzjoni tal-ħardwer."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfaċċja tan-network"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Hemm biss adattur wieħed fuq is-sistema tiegħek:\n"
-"\n"
-"%s\n"
-"\n"
-"Se nissettja n-network lokali fuq dak l-adattur."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Jekk jogħġbok agħżel liema adattur tan-network se jkun imqabbad man-network "
-"lokali (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interfaċċja tan-network diġà konfigurata"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Twissija, l-adattur tan-network (%s) diġà konfigurat.\n"
-"\n"
-"Trid ri-konfigurazzjoni awtomatika?\n"
-"\n"
-"Tista' tagħmilha manwalment imma trid tkun taf x'qed tagħmel."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Ri-konfigurazzjoni awtomatika"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Uri l-konfigurazzjoni kurrenti tal-interfaċċja"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Konfigurazzjoni kurrenti ta' \"%s\":\n"
-"\n"
-"Network: %s\n"
-"Indirizz IP: %s\n"
-"Attribuzzjoni IP: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Nista; nżomm il-konfigurazzjoni kurrenti u nassumi li diġà ssettjajt server "
-"DHCP; f'dak il-każ ikkonferma li qrajt l-indirizz tan-network klassi C sew; "
-"Ma nerġax nikkonfiguraha u ma mmissx il-konfigurazzjoni tas-server DHCP.\n"
-"\n"
-"Inkella, nista' nerġa nikkonfigura l-interfaċċja u nissettjalek server "
-"DCHP.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Network lokali klassi C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP ta' dan is-server DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Erġa' kkonfigura l-interfaċċja u s-server DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "In-network lokali ma jispiċċax b' \".0\", ħiereġ 'il barra."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Possibbilment hemm konflitt fl-indirizz LAN fil-konfigurazzjoni ta' %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Instabet konfigurazzjoni ta' firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Twissija: Instabet konfigurazzjoni eżistenti ta' firewall. Għandek mnejn "
-"tkun trid tirranġaha manwalment wara l-installazzjoni."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Qed nikkonfigura..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Qed nikkonfigura scripts, ninstalla softwer u ntella' servers..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi fl-installazzjoni tal-pakkett %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kollox Ä¡ie konfigurat.\n"
-"Issa tista taqsam konnessjonijiet ma' kompjuters oħra fuq in-network lokali, "
-"permezz tal-faċilità ta' konfigurazzjoni awtomatika (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Dan il-konfigurazzjoni diġà sar, imma bħalissa mitfi."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Dan il-konfigurazzjoni diġà sar, u bħalissa attivat."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ebda qsim tal-konnessjoni għadu ma ġie konfigurat."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfigurazzjoni tal-qsim tal-konnessjoni mal-internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Merħba għall-Faċilità ta' Qsim tal-Konnessoni tal-Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Ikklikkja \"Ikkonfigura\" biex tħaddem is-saħħar tal-konfigurazzjoni."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfigurazzjoni network (%d adattur/i)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Ħassar profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil xi tħassar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Profil Ä¡did..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Isem tal-profil Ä¡did (il-profil il-Ä¡did ikun kopja ta' dak kurrenti) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Isem tal-kompjuter: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Aċċess għall-internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfaċċja:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Stat:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Stenna ftit"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Ikkonfigura l-aċċess għall-internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Konfigurazzjoni LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaċċja"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Stat"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Ikkonfigura network lokali (LAN)..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klikkja hawn biex tħaddem is-saħħar ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Saħħar..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Applika"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Stenna ftit... qed napplika l-konfigurazzjoni"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Imqabbad"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Mhux imqabbad"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Aqbad..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Aqta'..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Twissija: instabet konnessjoni oħra tal-Internet, forsi qed tuża n-network "
-"tiegħek"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"M'għandek ebda interfaċċja konfigurata.\n"
-"L-ewwel ikkonfigurahom billi tikklikkja \"ikkonfigura\""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Konfigurazzjoni LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adattur %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protokoll Boot"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Tella' fil-bidu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Klijent DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "ixgħel issa"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "itfi issa"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Din l-interfaċċja għadha ma ġietx konfigurata.\n"
-"Ħaddem is-saħħar tal-konfigurazzjoni mill-window ewlenija"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Għad m'għandekx konnessjoni mal-internet.\n"
-"Oħloq waħda billi tikklikkja \"Ikkonfigura\""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfigurazzjoni tal-konnessjoni internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfigurazzjoni tal-konnessjoni internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip ta' konnessjoni: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Kard Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Klijent DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Livell ta' Sigurtà"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ÄŠentru tal-Kontroll"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Agħżel l-għodda li trid tuża"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "Stati Uniti (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "Stati Uniti (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "Stati Uniti (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "ÄŠina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Ä appun (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Ä appun (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Ewropa tal-Lvant"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Ewropa tal-Punent"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Awstralja"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "New Zealand"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Afrika t'Isfel"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Arġentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Jekk jogħġbok,\n"
-"daħħal it=\"TV norm\" u l-pajjiż"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norm :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Reġjun :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Tfittix għal stazzjonijiet tat-TV għaddej"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Qed infittex stazzjonijiet tat-TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "użu: keyboarddrake [--expert] [tastiera]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Jekk jogħġbok, agħżel it-tqassim tat-tastiera."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Trid li l-Backspace tirritorna Delete fuq il-konsol?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Ibdel is-CD"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Jekk jogħġbok daħħal is-CD tal-installazzjoni fid-drive u agħfas Ok meta\n"
-"tlesti. Jekk m'għandekx is-CD agħfas \"Ikkanċella\" biex tevita l-"
-"aġġornament."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ma stajtx nibda' l-aġġornament \"live\"!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Il-bidliet saru, imma biex ikunu effettivi trid tilloggja 'l barra"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Uri għall-ġurnata magħżula biss"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/_Ä did"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/File/_Iftaħ"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/I_kteb"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Ikteb b'isem _Ä¡did"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fajl/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/Għa_żliet"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Għażliet/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Għajnuna"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Għajnuna/_Dwar..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "User"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messaġġi"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Spjegazzjoni tal-għodda Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "fittex"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Għodda biex tifli l-logs"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Setings"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "li jaqblu"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "li ma jaqblux"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Agħżel fajl"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendarju"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Kontenut tal-fajl"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Twissija Imejl/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "stenna ftit... qed jinqara l-fajl: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigurazzjoni Imejl/twissijiet SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Merħba għall-għodda tal-konfigurazzjoni imejl/SMS.\n"
-"\n"
-"Hawn, tista' tissettja s-sistema tal-allerti.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "seting tas-servizz"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Tirċievi twissija jekk wieħed minn dawn is-servizzi ma jibqax jaħdem"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "seting tat-tagħbija"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Tirċievi twissija jekk it-tagħbija taqbeż dan il-valur"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "konfigurazzjoni tal-allerti"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Ikkonfigura l-mod kif is-sistema tibgħatlek twissijiet"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Ikteb b'isem Ä¡did..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Jekk jogħġbok agħżel it-tip ta' maws."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Ebda serial_usb ma nstab\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emula t-tielet buttuna?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s instab fuq %s, trid tikkonfigurah?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Agħżel skaner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Dan l-iskaner %s mhux sapportit"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Diska/apparat \"boot\""
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Dan l-iskaner %s irid jiġi konfigurat minn printerdrake.\n"
-"Tista' tħaddem lill printerdrake miċ-Ċentru tal-Kontroll Mandrake fis-"
-"sezzjoni Ħardwer."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigurazzjoni tal-Firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigurazzjoni tal-firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Diġà għandek firewall issettjat.\n"
-"Klikkja fuq \"ikkonfigura\" biex tbiddel jew tneħħi l-firewall."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Klikkja fuq \"ikkonfigura\" biex tissettja firewall standard."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Agħżel il-lingwa"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Agħżel klassi ta' installazzjoni"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Għarfien tal-ħard disk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Ikkonfigura l-maws"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Agħżel tastiera"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurtà"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Issettja filesystems"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ifformattja partizzjonijiet"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Agħżel pakketti biex tinstalla"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installa s-sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Żid user"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ikkonfigura network"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Ikkonfigura servizzi"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installa bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Oħloq \"boot disk\""
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Ikkonfigura X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installa aġġornamenti tas-sigurtà"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Oħroġ mill-installazzjoni"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfiguratur tinyfirewall\n"
-"\n"
-"Dan jikkonfigura firewall personali għal din is-sistema Mandrake Linux.\n"
-"Għal kompjuter firewall dedikat, jekk jogħġbok ara d-distribuzzjoni\n"
-"speċjalizzata MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Issa se nistaqsuk mistoqsijiet dwar liema servizzi tixtieq tħalli\n"
-"lill ħaddieħor jaċċessa mill-internet. Jekk jogħġbok aħseb sew dwar \n"
-"dawn il-mistoqsijiet, għax is-sigurtà tal-kompjuter huwa mportanti.\n"
-"\n"
-"Jekk m'intix qed tuża wieħed minn dawn is-servizzi, agħżel \"Le\".\n"
-"Tista' tbiddel il-konfigurazzjoni meta trid billi terġa' tħaddem dan\n"
-"il-programm."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Int qed tħaddem \"web server\" fuq dan il-kompjuter li tridu jkun\n"
-"aċċessibbli għall-Internet? Jekk qed tħaddem web server li jiġi\n"
-"aċċessat biss mill-istess kompjuter tista' tagħżel \"Le\" hawn.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Int qed tħaddem name server (DNS) fuq din il-magna? Jekk ma ssettjajtx\n"
-"wieħed biex joffri informazzjoni dwar IP u żoni lill-internet kollu,\n"
-"agħżel \"Le\".\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Tixtieq tħalli konnessjonijiet ssh (Secure Shell) deħlin? Dan\n"
-"jieħu post it-telnet li tista' tuża biex taċċessa l-kompjuter\n"
-"remotament. Jekk kont qed tuża telnet, definittivament aqleb għall-\n"
-"ssh. Telnet mhuwiex iċċifrat, għalhekk ħaddieħor jista' jisraq il-\n"
-"password. Ssh huwa Ä‹Ä‹ifrat u ma jippermettix min jissemma'."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Trid tħalli konnessjonijiet tat-telnet deħlin?\n"
-"Dan il-metodu huwa perikoluż ħafna, għax il-password tista' tinqara\n"
-"minn ħaddieħor. Aħna nirrakkomandaw li tirrispondi \"Le\" u tuża l-\n"
-"ssh minnflok it-telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Qed tħaddem server FTP li tridu jkun aċċessibbli mill-internet? Jekk\n"
-"iva, aħna nirrakkomandaw li dan jintuża biss għal trasferiment anonimu.\n"
-"Il-passwords li jintużaw bl-FTP jistgħu jinsterqu minn terzi persuni,\n"
-"peress li l-FTP ma jiċċifrax il-passwords meta jibgħathom.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Qed tħaddem server tal-imejl hawn? Jekk qed tibgħat il-messaġġi\n"
-"bil-pine, mutt jew klijent ieħor testwali (mhux grafiku), aktarx\n"
-"iva. Altrimenti jaqbillek tagħżel \"le\".\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Qed tħaddem server POP jew IMAP? Dan jintuża biex tipprovdi\n"
-"imejl lill nies oħra mill-kompjuter tiegħek.\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Jidher li qed tuża kernel 2.2.  Jekk in-numru IP tan-network\n"
-"huwa ssettjat awtomatikament minn kompjuter ieħor id-dar jew\n"
-"fl-uffiċċju (assenjat dinamikament), irridu nieħdu ħsiebu. Dan\n"
-"huwa l-każ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Il-kompjuter tiegħek jissinkronizza l-ħin ma' kompjuter ieħor?\n"
-"Normalment, dan jintuża minn organizzazzjonijiet kbar ibbażati\n"
-"fuq il-Unix/Linux, biex jissinkronizzaw il-kompjuters. Jekk m'\n"
-"intix fuq sistema kbira u qatt ma smajt b'dan, aktarx li m'initx."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurazzjoni lesta.  Nistgħu niktbu dawn il-bidliet fuq id-diska?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ma jistax jinfetaħ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ma jistax jinfetaħ %s għall-kitba: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Konfigurazzjoni tal-Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Stenna ftit, qed nipprepara l-installazzjoni"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Kompjuter fuq network (klijent)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servers NFS, SMB, Proxy, ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Uffiċċju"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Għodda għall-Palm Pilot jew Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Workstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name u Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmi tal-uffiċċju: wordprocessors (kword, abiword), spreadsheet "
-"(kspread, gnumeric) eċċ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Għodda relatati mal-awdjo: biex iddoqq mp3 u midi, miksers, eċċ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Kotba u \"HOWTO\" dwar il-Linux u Softwer Ħieles"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, eċċ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Sett ta' programmi għal imejl, newsgroups, web, trasferiment ta' fajls u chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Server tad-database PostgreSQL jew MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Għodda biex tiffaċilita l-konfigurazzjoni tal-kompjuter"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - awdjo"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Għodda"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentazzjoni"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Għodda tal-konsol"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Server tal-imejl Postfix, news server Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurazzjoni"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Desktops grafiċi oħrajn (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, l-interfaċċja grafika bażi, b'għażla ta' għodda "
-"jakkumpanjawha"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambjent Grafiku"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Għodda biex toħloq u taħraq CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kompjuter tal-Uffiċċju"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, eċċ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmi grafiċi bħal GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Libreriji, programmi u fajls għal żviluppar C u C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Kompjuter Server tan-Network"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Imejl/Groupware/Newsgroups"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Logħob"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Programmi għad-daqq u editjar ta' video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programmi ta' divertiment: logħob tal-arcades, karti, strateġija eċċ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Sett għodda biex taqra u tibgħat imejl u \"news\", u biex tibbrawżja l-web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivjar, emulaturi u monitors"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzi Personali"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Ambjent grafiku b' għażla ta' programmi u għodda faċli"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti għal protokolli differenti, eż. SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gateway tal-internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmi għad-daqq u editjar ta' awdjo u video"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Desktops Grafiċi Oħrajn"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Edituri, shells, għodda tal-fajls, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmi biex timmaniġġja l-finanzi personali"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Maniġġjar ta' Informazzjoni Personali"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Ħruq ta' CDs"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Xjentifiku"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Tista' tipprovdi l-għażliet lill-modulu %s."
-
-#~ msgid "mount failed"
-#~ msgstr "immuntar falla"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Ma nistax naċċessa l-moduli tal-kernel li jikkorrispondu mal-kernel "
-#~ "tiegħek (fajl %s nieqes)"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-*-*-medium-r-normal-*-12-*-*-*-p-*-iso8859-3,*-r-*"
-
-#~ msgid "None"
-#~ msgstr "Ebda"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Agħżel printer impliċitu!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Applika/erġa' aqra' printers"
-
-#~ msgid "About"
-#~ msgstr "Dwar"
-
-#~ msgid "             Help           "
-#~ msgstr "           Għajnuna         "
diff --git a/perl-install/share/po/nl.po b/perl-install/share/po/nl.po
deleted file mode 100644
index 9270f3cfd..000000000
--- a/perl-install/share/po/nl.po
+++ /dev/null
@@ -1,12264 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999-2000 Mandrakesoft
-# Jo <rainbow@linuxfan.com>, 1999
-# Tom Laermans <sidewinder@linuxfreak.com>, 2000
-# Niels Gras <niels.gras@wanadoo.nl>, 2000
-# Reinout van Schouwen <reinout@cs.vu.nl>, 2001, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-01 01:34+0100\n"
-"Last-Translator: Reinout van Schouwen <reinout@cs.vu.nl>\n"
-"Language-Team: Dutch <vertaling@nl.linux.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configureer alle koppen afzonderlijk"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-uitbreiding"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configureer alleen kaart \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multi-koppen configuratie"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Uw systeem ondersteunt een configuratie met meerdere koppen.\n"
-"Want wenst u te doen?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Selecteer een grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Selecteer een X-server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-Server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Kiest u een X-stuurprogramma"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-stuurprogramma"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welke configuratie van XFree wilt u hebben?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Uw kaart kan 3D acceleratie ondersteuning krijgen, maar alleen met XFree %"
-"s.\n"
-"Uw kaart wordt ondersteund door XFree %s, welke betere ondersteuning zou \n"
-"kunnen hebben in 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Uw kaart kan 3D acceleratie ondersteuning krijgen met XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D hardware acceleratie"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Uw kaart kan 3D acceleratie ondersteuning krijgen met XFree %s.\n"
-"LET OP: DIT IS EEN EXPERIMENTELE ONDERSTEUNING, WELKE UW COMPUTER KAN "
-"LATEN \n"
-"VASTLOPEN."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EXPERIMENTELE 3D hardware acceleratie"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Uw kaart kan 3D hardware acceleratie ondersteuning hebben, maar alleen met \n"
-"XFree %s, LET OP: DIT IS EEN EXPERIMENTELE ONDERSTEUNING, WELKE UW "
-"COMPUTER \n"
-"KAN LATEN VASTLOPEN.\n"
-"Uw kaart wordt ondersteund door XFree %s, welke betere ondersteuning zou \n"
-"kunnen hebben in 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installatie beeldscherm-stuurprogramma"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree configuratie"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Selecteer de geheugengrootte van uw grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Selecteer de opties voor de X-server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Selecteer een monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De twee cruciale parameters zijn de verticale verversingsratio, d.w.z.\n"
-"de snelheid waarmee het volledige scherm wordt ververst en nog "
-"belangrijker \n"
-"de horizontale sync ratio, dit is de snelheid waaraan de scanlijnen worden\n"
-"geschreven\n"
-"\n"
-"Het is UITERMATE BELANGRIJK dat u geen monitor type opgeeft die een sync "
-"bereik\n"
-"heeft die de mogelijkheden van uw monitor overschrijdt: u kan uw monitor\n"
-"beschadigen.\n"
-"Bij twijfel maakt u best een voorzichtige keuze."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontale verversingsratio"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Verticale verversingsratio"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor niet geconfigureerd"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafische kaart nog niet geconfigureerd"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resoluties nog niet gekozen"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Wenst u de configuraties te testen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Waarschuwing: door deze grafische kaart te testen, kan uw computer vastlopen"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Configuratie Testen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probeer enkele parameters aan te passen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Er is een fout opgetreden:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Verdwijnt binnen %d seconden"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Is dit de juiste instelling?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Er is een fout opgetreden, probeer een aantal parameters aan te passen"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolutie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Kies resolutie en kleurdiepte"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafische kaart: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Meer"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Expert modus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Toon alles"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluties"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Toetsenbord instelling: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistype: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muis: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horizontale Sync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor verticale verversing: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafische kaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificatie grafische kaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Videogeheugen: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolutie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 stuurprogramma: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Bezig met het voorbereiden van de X-Window configuratie"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Wat wenst u te doen?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Verander Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Verander grafische kaart"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Verander Server-opties"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Resolutie wijzigen"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Informatie tonen"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Opnieuw testen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Beëindig"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Veranderingen bewaren?\n"
-"De huidige configuratie is:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X bij opstarten"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ik kan uw computer instellen om automatisch X te starten bij opstarten.\n"
-"Wenst u X te starten bij het opstarten?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Gelieve opnieuw in te loggen op %s om de wijzigingen te activeren"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Gelieve uit te loggen en daarna Ctrl-Alt-Backspace te gebruiken"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kleuren (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 kleuren (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 kleuren (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoen kleuren (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljard kleuren (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB of meer"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standaard VGA, 640x480 aan 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 aan 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatibel, 1024x768 aan 87 Hz interlaced (geen 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 aan 87 Hz interlaced, 800x600 aan 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 aan 60 Hz, 640x480 aan 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 aan 60 Hz, 800x600 aan 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 aan 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 60 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 74 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency in staat om 1280x1024 aan 76 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Multi-frequency in staat om 1600x1200 aan 70 Hz weer te geven"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Multi-frequency in staat om 1600x1200 aan 76 Hz weer te geven"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Eerste sector van boot-partitie"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sector van station (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Installatie"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wenst u de bootloader te installeren?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installatie"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO met tekst-menu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO met grafisch menu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Opstarten vanuit DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Bootloader algemene opties"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Welke bootloader te gebruiken"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader installatie"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot-apparaat"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (werkt niet met oude BIOS'en)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video-modus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pauze voor het opstarten van standaard-beeld"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Wachtwoord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Wachtwoord (nogmaals)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Commandoregel-opties beperken"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "beperken"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Elke keer bij opstarten /tmp legen"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Juiste RAM-grootte (indien nodig) (%d MB gevonden)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Meerdere profielen inschakelen"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Geef de RAM-grootte in MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"De optie ``Commandoregel-opties beperken'' heeft geen nut zonder wachtwoord"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Gelieve opnieuw te proberen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "De wachtwoorden kloppen niet met elkaar"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Initialisatie-bericht"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Kernel opstart-wachttijd"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Opstarten van CD mogelijk maken?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Opstarten van OF mogelijk maken?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Standaard besturingssysteem?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier zijn de ingangen voor LILO.\n"
-"U kunt er enkele toevoegen of de bestaande wijzigen."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Toevoegen"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Klaar"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Aanpassen"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Welk type ingang wenst u toe te voegen?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ander OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ander OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ander OS (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Beeld"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Achteraan toevoegen"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lezen/schrijven"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Onveilig"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Naam"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standaard"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Geen Video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ingang verwijderen"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Lege naam is niet toegelaten"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "U dient een kernel-beeldbestand aan te geven"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "U dient een root-partitie aan te geven"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Deze naam wordt al gebruikt"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s interfaces gevonden"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Heeft u er nog één?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heeft u een %s interface?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nee"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Bekijk hardware-info"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Bezig met installeren van stuurprogramma voor %s kaart %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welk %s stuurprogramma moet ik proberen?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In sommige gevallen heeft het stuurprogramma van %s extra informatie nodig\n"
-"om juist te werken, alhoewel het meestal ook zonder goed werkt. Wil u\n"
-"extra opties invoeren of laat u liever het stuurprogramma zijn informatie\n"
-"zelf zoeken? Soms zal de automatische detectie de computer laten hangen,\n"
-"maar het zou geen schade mogen veroorzaken."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatisch Detecteren"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Geef opties"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"U kunt nu zijn opties doorgeven aan module %s.\n"
-"Merk op dat een adres moet worden ingegeven met de prefix 0x zoals '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"U mag nu de opties voor module %s ingeven.\n"
-"Opties staan in het formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bijvoorbeeld, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Module-opties:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Het laden van module %s is niet gelukt.\n"
-"Wenst u opnieuw te proberen met andere parameters?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "toegang tot X-programma's"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "toegang tot rpm-gereedschappen"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "\"su\" toestaan"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "toegang tot administratieve bestanden"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s reeds toegevoegd)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dit wachtwoord is te eenvoudig"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Gelieve een gebruikersnaam in te geven"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"De gebruikersnaam mag slechts kleine letters, cijfers, `-' en`_' bevatten"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Deze gebruikersnaam werd reeds toegevoegd"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Gebruiker toevoegen"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Geef een gebruiker in\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Gebruiker aanvaarden"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Echte naam"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Gebruikersnaam"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Pictogram"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatisch inloggen"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ik kan uw computer instellen om automatisch bij een bepaalde gebruiker in te "
-"loggen.\n"
-"Wilt u van deze mogelijkheid gebruik maken?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Kies de standaard gebruiker:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Selecteer de 'window manager' die u wilt gebruiken:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Gelieve een taal te kiezen."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "U kunt andere talen kiezen die beschikbaar zullen zijn na installatie"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alles"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Alle gebruikers toestaan"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Aangepast"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Niet delen"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakket %s dient geïnstalleerd te worden. Wilt u het installeren?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"U kunt bestandssystemen exporteren met behulp van NFS of Samba. Welke "
-"daarvan wilt u gebruiken?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Verplicht pakket %s is afwezig"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annuleren"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Userdrake opstarten"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"De 'per gebruiker delen'-functie gebruikt de groep\n"
-"\"fileshare\". U kunt met userdrake een gebruiker\n"
-"aan deze groep toevoegen."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Welkom, krakers!"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Zeer laag"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standaard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hoog"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Hoger"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoïde"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dit niveau moet met voorzichtigheid gebruikt worden. Het maakt uw systeem\n"
-"makkelijker te gebruiken maar erg gevoelig: het moet niet gebruikt worden "
-"als\n"
-"machine die met andere computers of het internet verbonden is. Er worden\n"
-"geen wachtwoorden gebruikt."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Wachtwoorden zijn nu ingeschakeld, maar het gebruik als genetwerkte computer "
-"is nog steeds niet aanbevolen."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dit is de standaardbeveiliging, aangeraden voor een computer die als client "
-"met het Internet verbonden zal worden."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Er zijn al enkele restricties en meer automatische checks worden iedere "
-"nacht gedraaid."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Met dit veiligheidsniveau wordt het mogelijk dit systeem als server te "
-"gebruiken.\n"
-"De beveiliging is nu goed genoeg om de computer als server te gebruiken die\n"
-"verbindingen van vele clients accepteert. Merk op: als uw computer alleen "
-"een\n"
-"client op het Internet is, dan kunt u beter een lager niveau kiezen."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Gebaseerd op het vorige niveau, maar nu is het systeem volledig afgesloten.\n"
-"Beveiligingsfuncties staan op hun maximumwaarde."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Kies een veiligheids-niveau"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Veiligheids-niveau"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Gebruik libsafe voor servers"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Een bibliotheek welke bescherming biedt tegen \"buffer-overflow\"- en "
-"\"format string\"-aanvallen."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welkom bij %s - Kies uw besturingssysteem!\n"
-"\n"
-"Kies een ingang uit de bovenstaande lijst\n"
-"of wacht %d seconden voor de standaard-opstartkeuze.\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom bij GRUB - Kies uw besturingssysteem!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Gebruik de %c en %c-toetsen om te aangeduide ingang te selecteren."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk Enter om het geselecteerde besturingssysteem te booten, druk 'e'"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr " om de ingang eerst te bewerken, of 'c' voor een command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"De aangeduide ingang zal automatisch gestart worden binnen %d seconden."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "niet genoeg ruimte in /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "U kunt de opstart-lader niet installeren op een %s-partitie\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Helaas geen hulp beschikbaar.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuratie van opstart-stijl"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Bestand:"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Bestand/_Beëindig"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nieuwe stijl (in categorieën)"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nieuwe stijl"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionele stijl"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionele stijl (Gtk+)"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora gebruiken bij opstarten"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"U gebruikt op dit moment %s als Opstart-manager.\n"
-"Klik op Configureer om de instel-'wizard' te starten."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configureren"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systeemvorm"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Open het X-Window systeem bij opstarten"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nee, ik wil niet automatisch inloggen"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ik wil automatisch inloggen met deze (gebruiker, werkomgeving)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan /etc/inittab niet openen: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuten"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d seconden"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kan geen schermafdruk maken voor het partitioneren"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Schermafdrukken zullen beschikbaar zijn na installatie in %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankrijk"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "België"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tsjechische Republiek"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Duitsland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Griekenland"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Noorwegen"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Zweden"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nederland"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italië"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Oostenrijk"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Verenigde Staten"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Gelieve eerst een veiligheidskopie van uw gegevens te maken"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lees aandachtig!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Als u aboot wenst te gebruiken, wees dan voorzichtig en laat vrije ruimte "
-"(2048 sectoren is genoeg)\n"
-"aan het begin van de schijf"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fout"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Kies een actie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"U heeft één grote FAT-partitie\n"
-"(meestal gebruikt door Microsoft DOS/Windows).\n"
-"Ik stel voor dat u eerst de grootte van die partitie aanpast\n"
-"(klik erop, en klik daarna op \"Grootte Aanpassen\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Gelieve op een nieuwe partitie te klikken"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Details"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Virtueel geheugen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ander type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Bestandssysteem types:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Creëer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' in de plaats"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Verwijderen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik eerst ``Ontkoppelen''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het veranderen van het type van partitie %s, zullen alle gegevens op deze "
-"partitie verloren gaan"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Kies een partitie"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Kies een andere partitie"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Afsluiten"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Schakel naar expert-modus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Schakel naar normale modus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Ongedaan maken"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Toch doorgaan?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Beëindig zonder opslaan"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Beëindigen zonder de partitietabel weg te schrijven?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wilt u de /etc/fstab aanpassingen bewaren"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatisch toewijzen"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Alles wissen"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informatie over harde schijf"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle primaire partities zijn al toegewezen"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ik kan geen partitie meer toevoegen"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Om meer partities te kunnen maken, zal u er een moeten verwijderen. Dan kan\n"
-"er een uitgebreide (extended) partitie worden bijgemaakt"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Partitietabel schrijven"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Partitietabel terughalen"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Partitietabel redden"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Partitietabel opnieuw laden"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatische koppeling van verwisselbare media"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selecteer bestand"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"De backup partitietabel heeft niet dezelfde grootte\n"
-"Toch verdergaan?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Waarschuwing"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Plaats een floppy in het station.\n"
-"Alle gegevens op deze floppy zullen verloren gaan"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Proberen om partitietabel te redden"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Gedetailleerde informatie"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Koppelpunt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opties"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Grootte aanpassen"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Verplaatsen"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatteren"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Koppelen"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Toevoegen aan RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Toevoegen aan LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ontkoppelen"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Verwijderen uit RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Verwijderen uit LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID aanpassen"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Voor Loopback gebruiken"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Nieuwe partitie creëren"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Start-sector: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Bestandssysteem-type: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Koppelpunt: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Voorkeur: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Het loopback-bestand verwijderen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Verander partitietype"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Welk bestandssysteem wenst u?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Bezig met omschakelen van ext2 naar ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Waar wenst u dit loopback-apparaat %s aan te koppelen?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waaraan wenst u dit apparaat %s te koppelen?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan een koppelpunt niet verzetten omdat deze partitie gebruikt wordt als\n"
-"loopback. Verwijder de loopback eerst."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Bezig met berekenen van FAT bestandssysteemgrenzen"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Bezig met de grootte aan te passen"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Deze partitie is niet in grootte aanpasbaar"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Er zou een reservekopie moeten gemaakt worden van alle gegevens op deze "
-"partitie."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het veranderen van de grootte van partitie %s, zullen alle gegevens op "
-"deze partitie verloren gaan"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Kies de nieuwe grootte"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nieuwe grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Naar welke schijf wenst u het te verplaatsen?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Naar welke sector wenst u het te verplaatsen?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Aan het verplaatsen"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partitie aan het verplaatsen..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Kies een bestaande RAID om aan toe te voegen"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nieuw"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Kies een bestaande LVM om aan toe te voegen"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Naam van LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Deze partitie kan niet gebruikt worden voor loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback-bestandsnaam: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Voer een bestandsnaam in"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Loopback-bestand is al in gebruik, gelieve een ander te kiezen"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Het bestand bestaat al. Wenst u het te gebruiken?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Koppel-opties:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Diversen"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "apparaat"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "niveau"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "chunk-grootte"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Voorzichtig: deze operatie is gevaarlijk."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Welk type partitionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Sorry, het is zinloos om /boot zo ver achteraan de schijf te plaatsen (op "
-"een\n"
-"cylinder > 1024).\n"
-"Ofwel gebruikt u LILO en zal het niet werken, of u gebruikt LILO niet en u "
-"heeft\n"
-"/boot niet nodig."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"De partitie die u selecteerde als rootpartitie (/) bevindt zich fysiek "
-"voorbij\n"
-"de 1024e cylinder van de harde schijf en u heeft geen /boot partitie.\n"
-"Indien u de LILO boot manager wenst te gebruiken, zorg er dan voor dat u "
-"een\n"
-"/boot partitie toevoegt aan het begin van de schijf"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"U heeft een software RAID partitie als root (/) geselecteerd.\n"
-"Geen bootloader kan dit aan zonder een /boot partitie, dus wees er zeker\n"
-"van ook een /boot-partitie toe te voegen."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitietabel van schijf %s wordt weggeschreven!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U zal moeten herstarten voordat de aanpassing van kracht wordt"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Na het formatteren van partitie %s, zullen alle gegevens op deze partitie "
-"verloren zijn"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Bezig met formatteren"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Bezig met formatteren van loopback-bestand %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Bezig met formatteren van partitie %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Bestanden verbergen"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Bestanden naar de nieuwe partitie verplaatsen"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Map %s bevat reeds gegevens\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Bezig met verplaatsen van bestanden naar de nieuwe partitie"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Bezig met kopiëren van %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Bezig met verwijderen van %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partitie %s heet vanaf nu %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Apparaat: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS schijfletter: %s (dit is slechts een gok)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Naam: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectoren"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d tot %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Geformatteerd\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Niet geformatteerd\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Gekoppeld\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback-bestand(en):   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standaard te starten partitie\n"
-"    (om MS-DOS te booten, niet voor lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-grootte %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-schijven %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback bestandsnaam: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"De kans is aanwezig dat deze\n"
-"partitie een Driver partitie is, u\n"
-"kunt hem waarschijnlijk beter met\n"
-"rust laten.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Deze speciale Bootstrap\n"
-"partitie is voor het\n"
-"duaal-opstarten van uw systeem.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Indeling: %s cylinders, %s koppen, %s sectoren\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-schijven %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitietabel-type: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opties: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Sleutel voor bestandssysteemencryption"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Kies uw sleutel voor bestandssysteemencryption"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Deze encryption-sleutel is te makkelijk (moet tenminste %d tekens lang zijn)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "De encryption-sleutels kloppen niet met elkaar"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Encryptionsleutel"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Encryptionsleutel (nogmaals)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Verander partitietype"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Gelieve op een media-soort te klikken"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Servers zoeken"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatteren van %s mislukt"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ik weet niet hoe %s in type %s te formatteren"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "het koppelen van partitie %s in map %s is mislukt"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck is mislukt met afsluitcode %d of signaal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout bij ontkoppelen %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "met /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan JFS niet gebruiken op een partitie kleiner dan 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan ReiserFS niet gebruiken op een partitie kleiner dan 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Koppelpunten moeten beginnen met een /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Er is al een partitie met als koppelpunt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kunt geen LVM logisch deel voor koppelpunt %s gebruiken"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Deze map zou binnen het root bestandssysteem moeten blijven"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"U benodigt een geavanceerd bestandssysteem (ext2, reiserfs) voor dit "
-"koppelpunt\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "U kunt geen versleuteld bestandssysteem voor koppelpunt %s gebruiken"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Niet voldoende vrije ruimte voor automatische toewijzing"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Niets meer te doen"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fout bij het openen van %s voor schrijfbewerking: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Er is een fout opgetreden - er werden geen geldige apparaten gevonden "
-"waarop\n"
-"nieuwe bestandssystemen konden worden gecreëerd. Gelieve uw hardware na te\n"
-"kijken voor de oorzaak van dit probleem."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "U heeft helemaal geen partities!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is een multi-gebruikerssysteem, dit betekent dat iedere "
-"gebruiker \n"
-"haar eigen voorkeuren, bestanden enzovoort kan hebben. U kunt de \n"
-"''Gebruikershandleiding'' lezen om hierover meer te weten te komen. Maar \n"
-"in tegenstelling tot \"root\", de \"administrator\", zullen de gebruikers "
-"die\n"
-" u hier toevoegt geen recht hebben om iets te veranderen behalve hun eigen \n"
-"bestanden en hun eigen configuratie. U zult tenminste één gebruiker voor \n"
-"uzelf aan moeten maken. Deze account is degene waar u voor dagelijks "
-"gebruik \n"
-"op zult inloggen. Alhoewel het erg praktisch is om iedere dag als \"root\" \n"
-"in te loggen, kan het ook erg gevaarlijk zijn! De kleinste vergissing kan \n"
-"ervoor zorgen dat uw hele systeem niet meer werkt. Wanneer u een \n"
-"grote vergissing maakt als een reguliere gebruiker, zou u sommige gegevens \n"
-"kunnen verliezen, maar niet het hele systeem.\n"
-"\n"
-"Eerst voert u uw echte naam in. Dit is uiteraard niet verplicht - u kunt \n"
-"alles invoeren wat u wilt. DrakX neemt dan het eerste woord dat u in het "
-"veld \n"
-"hebt ingevuld en brengt het over naar het veld \"Gebruikersnaam\". Dit is "
-"de \n"
-"naam die deze afzonderlijke gebruiker krijgt om in te loggen op het "
-"systeem. \n"
-"U kunt het veranderen. Dan zal u hier een wachtwoord moeten invoeren. Het \n"
-"wachtwoord van een (reguliere) gebruiker zonder privileges is niet zo \n"
-"cruciaal als dat van de \"root\"-gebruiker vanuit veiligheidsperspectief, \n"
-"maar dat is geen reden om het te verwaarlozen- tenslotte staan uw "
-"bestanden \n"
-"op het spel.\n"
-"\n"
-"Wanneer u klikt op \"Gebruiker aaanvaarden\", dan kunt u daarna zoveel \n"
-"gebruikers toevoegen als u wilt. Voeg een gebruiker toe voor elk van uw \n"
-"vrienden, uw vader of uw zus bijvoorbeeld. Als u klaar bent met het \n"
-"toevoegen van alle gebruikers die u wenst, selecteer dan \"Klaar\".\n"
-"\n"
-"Klikken op de \"Geavanceerd\"-knop stelt u in staat om de standaard \"shell"
-"\"\n"
-"voor een gebruiker te veranderen (standaard is dit bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Hierboven zijn de bestaande Linux partities afgebeeld die op uw harde\n"
-"schijf gevonden zijn. U kunt de keuzes die gemaakt zijn door de wizard\n"
-"behouden, ze zijn goed voor de meeste doorsnee installaties.\n"
-"Indien u veranderingen maakt, moet u in ieder geval een root partitie\n"
-"(\"/\") definiëren. Kies een partitie niet te klein, anders zult u niet in\n"
-"staat zijn genoeg software te installeren. Indien u uw  gegevens op een\n"
-"aparte partitie wilt bewaren, dient u tevens een \"/home\" partitie te\n"
-"creëren (alleen mogelijk wanneer er meer dan één Linux partitie\n"
-"beschikbaar is).\n"
-"\n"
-"Elke partitie is als volgt afgebeeld: \"Naam\", \"Capaciteit\"\n"
-"\n"
-"\"Naam\" is als volgt opgebouwd: \"type harde schijf\", \"harde schijf-nummer"
-"\",\n"
-"\"partitienumer\" (bijvoorbeeld \"hda1\").\n"
-"\n"
-"\"Type harde schijf\" is \"hd\" als uw harde schijf van het IDE-type is en"
-"\"sd\" wanneer deze van het SCSI type is.\n"
-"\n"
-"\"Harde schijf-nummer\" is altijd een letter na \"hd\" of \"sd\". Voor IDE\n"
-"harde schijven:\n"
-"\n"
-" * \"a\" betekent \"master harde schijf op de primaire IDE controller\",\n"
-"\n"
-" * \"b\" betekent \"slave harde schijf op de primaire IDE controller\",\n"
-"\n"
-" * \"c\" betekent \"master harde schijf op de secundaire IDE controller\",\n"
-"\n"
-" * \"d\" betekent \"slave harde schijf op de secundaire IDE controller\".\n"
-"\n"
-"In het geval van SCSI harde schijven betekent een \"a\" \"laagste SCSI ID"
-"\",\n"
-"een \"b\" \"het op één na laagste SCSI ID\", etc."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"De Mandrake Linux installatie is verdeeld over meerdere CDROMs. DrakX \n"
-"weet of een geselecteerd pakket te vinden is op een andere CDROM en zal\n"
-"de huidige CD uitwerpen en u vragen om een andere in te leggen wanneer\n"
-"dat nodig is."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Het is nu tijd om te bepalen welke programma's u op uw systeem\n"
-"wenst te installeren. Er zijn duizenden pakketten beschikbaar voor Mandrake\n"
-"Linux, en er wordt niet van u verwacht dat u ze allemaal uit uw hoofd kent.\n"
-"\n"
-"Indien u een standaard-installatie vanaf CD-ROM uitvoert, zal u eerst\n"
-"gevraagd worden de CD's die u bij de hand heeft te specificeren (alleen\n"
-"in Expert-modus). Ga de CD-etiketten na en selecteer de vakjes die\n"
-"corresponderen met de CD's die u heeft voor de installatie. Klik op \"OK\"\n"
-"zodra u gereed bent om verder te gaan.\n"
-"\n"
-"Pakketten zijn samengebracht in groepen die corresponderen met een\n"
-"bepaald gebruik van uw computer. De groepen zelf zijn ingedeeld in vier\n"
-"categorieën:\n"
-"\n"
-"* \"Werkstation\": indien u van plan bent uw computer als werkstation te\n"
-"gaan gebruiken, selecteer dan één of meer van de corresponderende\n"
-"groepen. \n"
-"\n"
-"* \"Ontwikkeling\": als de computer gebruikt gaat worden voor programmeren,\n"
-"kiest u de gewenste groep(en).\n"
-"\n"
-"* \"Server\": als de computer bestemd is voor server-doeleinden, dan\n"
-"kunt u aangeven welke van de meest algemene diensten u op uw\n"
-"computer geïnstalleerd wilt zien.\n"
-"\n"
-"* \"Grafische Omgeving\": tot slot is dit waar u uw voorkeur voor een "
-"grafische\n"
-"omgeving kunt aangeven. Tenminste één moet geselecteerd zijn als u een\n"
-"grafisch werkstation wilt hebben!\n"
-"\n"
-"Bij het bewegen van de muispijl boven een groepnaam zal er een korte "
-"verklarende\n"
-"tekst over die groep getoond worden. Als u alle groepen deselecteert tijdens "
-"het\n"
-"uitvoeren van een reguliere installatie (in tegenstelling tot een "
-"opwaardering), dan\n"
-"zal een dialoogvenster verschijnen dat verscheidene opties voor een "
-"minimale\n"
-"installatie voorstelt:\n"
-" * \"Met X\" Installeer zo min mogelijk pakketten met behoud van een "
-"grafische\n"
-"werkomgeving;\n"
-" \n"
-" * \"Met basis-documentatie\" installeert het basissysteem plus algemene\n"
-"hulpprogramma's en hun documentatie. Deze installatie is geschikt om een "
-"server\n"
-"mee in te richten.\n"
-"\n"
-" * \"Werkelijk minimale installatie\" zal het absolute minimum installeren "
-"dat nodig\n"
-"is om een werkend Linux-systeem te verkrijgen, slechts met een "
-"commandoregel.\n"
-"Deze installatie is ongeveer 65MB groot.\n"
-"\n"
-"U kunt het \"Individuele pakketselectie\"-vakje selecteren, welke nuttig is "
-"als\n"
-"u bekend bent met de aangeboden pakketten of indien u totale controle wenst\n"
-"over wat er geïnstalleerd zal worden.\n"
-"\n"
-"In het geval dat u de installatie in \"Opwaarderen\"-modus heeft gestart, "
-"kunt u\n"
-"alle groepen deselecteren om te voorkomen dat er nieuwe pakketten "
-"geïnstalleerd\n"
-"worden. Dit is nuttig bij het repareren of het vernieuwen van een bestaand "
-"systeem."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Tenslotte, afhankelijk van uw keus om al dan niet individuele pakketten\n"
-"te selecteren, wordt u een boom getoond bevattende alle pakketten\n"
-"geclassificeerd in groepen en subgroepen. Terwijl u door de boom bladert,\n"
-"kunt u gehele groepen, subgroepen of individuele pakketten selecteren.\n"
-"\n"
-"Wanneer u een pakket in de boom selecteert, verschijnt een beschrijving\n"
-"aan de rechterkant. Zodra uw selectie klaar is, klikt u de \"Installeren\"-\n"
-"knop welke het installatieproces in gang zal zetten. Afhankelijk van de\n"
-"snelheid van uw apparatuur en het aantal pakketten dat geïnstalleerd\n"
-"moet worden, kan het enige tijd duren om het proces te voltooien. Een\n"
-"geschatte tijd tot voltooiing wordt weergegeven op het scherm om u te\n"
-"helpen inschatten of er nog tijd is om te genieten van een kopje koffie.\n"
-"\n"
-"!! Als een server-pakket geselecteerd is, ofwel bedoeld ofwel omdat\n"
-"het onderdeel is van een gehele groep, zal u gevraagd worden om\n"
-"te bevestigen dat u deze servers echt wilt installeren. Onder Mandrake\n"
-"Linux worden alle geïnstalleerde servers standaard ingeschakeld\n"
-"tijdens het opstarten. Zelfs wanneer zij veilig zijn en geen bekende\n"
-"beveiligingsgebreken hadden op het moment dat de distributie "
-"werdnuitgebracht, kan het gebeuren dat beveiligingsfouten ontdekt worden\n"
-"nadat deze versie van Mandrake Linux afgemaakt werd. Indien u niet\n"
-"weet wat een bepaalde dienst geacht wordt te doen of waarom het\n"
-"geïnstalleerd wordt, klikt u dan \"Nee\". Klikken op \"Ja\" zorgt ervoor\n"
-"dat de getoonde diensten geïnstalleerd worden en dat ze automatisch\n"
-"ingeschakeld zullen worden. !!\n"
-"\n"
-"De \"Automatische afhankelijkheden\"-optie schakelt eenvoudigweg het\n"
-"waarschuwingsvenster uit dat verschijnt wanneer het installatieprogramma\n"
-"automatisch een pakket selecteert. Dit gebeurt omdat het vastgesteld heeft\n"
-"dat het een afhankelijkheid moet vervullen met een ander pakket om de\n"
-"installatie succesvol te kunnen voltooien.\n"
-"\n"
-"Het minuscule diskette-pictogram onderaan de lijst stelt u in staat de\n"
-"pakketten-lijst te laden die tijdens een eerdere installatie gekozen was.\n"
-"Als u klikt op dit pictogram zal u gevraagd worden een diskette in het\n"
-"diskettestation te plaatsen welke gecreëerd was aan het eind van een\n"
-"andere installatie. Zie de tweede tip van de laatste stap over hoe u een\n"
-"dergelijke diskette aanmaakt."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Het is nu mogelijk om uw internet- of netwerkverbinding in te stellen.\n"
-"Indien u wenst uw computer aan het Internet of aan een lokaal netwerk te\n"
-"verbinden, klik dan op \"OK\". De automatische bespeuring van netwerk-\n"
-"apparaten en modem zal worden opgestart. Als deze bespeuring mislukt,\n"
-"deselecteer dan het \"Automatische bespeuring gebruiken\"-vakje de\n"
-"volgende keer. U kunt ook besluiten het netwerk niet te configureren of\n"
-"het later pas te doen; in dat geval klikt u op de \"Annuleren\"-knop.\n"
-"Beschikbare verbindingstypen zijn:\n"
-"conventionele modem, ISDN-adapter, ADSL-verbinding, kabelmodem en\n"
-"tenslotte een eenvoudige LAN-verbinding (Ethernet).\n"
-"\n"
-"Wij zullen hier niet tot in detail ingaan op elke configuratie. Zorgt u er\n"
-"gewoon voor dat u alle instellingen van uw Internetprovider of\n"
-"systeembeheerder bij de hand heeft.\n"
-"\n"
-"U kunt het hoofdstuk over Internetverbindingen in het handboek\n"
-"raadplegen voor details over de configuratie, of gewoon wachten\n"
-"totdat uw systeem geïnstalleerd is en dan het beschreven programma\n"
-"gebruiken om uw verbinding te configureren.\n"
-"\n"
-"Indien u wenst het netwerk later na de installatie te configureren of\n"
-"indien u klaar bent met het configureren van uw verbinding, klikt u\n"
-"op \"Annuleren\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"U kunt nu kiezen welke diensten u wil gestart hebben bij het opstarten.\n"
-"\n"
-"In dit overzicht staan alle diensten die beschikbaar zijn in de huidige\n"
-"installatie. Kijk ze aandachtig na en de-selecteer degenen die niet altijd\n"
-"nodig zijn bij het opstarten.\n"
-"\n"
-"U kunt een korte uitleg krijgen over een dienst door een specifieke dienst\n"
-"te selecteren. Wanneer u niet zeker bent of een dienst nuttig is of niet,\n"
-"dan is het veiliger om de standaard-instelling over te nemen.\n"
-"\n"
-"Wees vooral voorzichtig in deze stap als u uw machine als een server wil\n"
-"gebruiken: u zal waarschijnlijk de diensten die u niet nodig heeft niet "
-"willen\n"
-"starten. Onthoud alstublieft dat een aantal diensten gevaarlijk kunnen zijn\n"
-"wanneer ze geactiveerd zijn op een server. In het algemeen geldt: kies\n"
-"alleen de services die u echt nodig heeft."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux houdt de tijd bij in GMT (Greenwich Mean Time) en vertaalt\n"
-"het naar lokale tijd volgens de tijdzone die u geselecteerd heeft. Het is\n"
-"echter mogelijk om dit te deactiveren door \"Hardware klok ingesteld op\n"
-"GMT\" te deselecteren zodat de hardware-klok dezelfde is als de systeem-\n"
-"klok. Dit is nuttig wanneer er op de computer nog een ander besturings-\n"
-"systeem staat zoals Windows.\n"
-"\n"
-"De \"Automatische tijdssynchronisatie\"-optie zal de klok automatisch\n"
-"bijstellen door verbinding te maken met een tijdsserver op internet. In\n"
-"de getoonde lijst kunt u een server kiezen bij u in de buurt. Uiteraard\n"
-"moet u een werkende internetverbinding hebben voordat deze functie\n"
-"werkt. Dit zorgt er tevens voor dat er een tijdsserver op uw computer\n"
-"wordt geïnstalleerd die mogelijkerwijs gebruikt kan worden door\n"
-"andere computers op uw lokale netwerk."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (voor X Window System) is het hart van de GNU/Linux grafische interface\n"
-"waarvan alle grafische omgevingen (KDE, GNOME, AfterStep, WindowMaker...)\n"
-"afhankelijk zijn die met Mandrake Linux zijn meegeleverd. In deze stap zal "
-"DrakX\n"
-"trachten X automatisch te configureren.\n"
-"\n"
-"Het is uiterst ongebruikelijk dat dit mislukt, tenzij de hardware erg oud "
-"(of\n"
-"erg nieuw) is. Als het slaagt, zal X automatisch gestart worden in het "
-"beste\n"
-"oplossend vermogen mogelijk, afhankelijk van de grootte van uw monitor.\n"
-"Een venster zal verschijnen en u vragen of u het kunt zien.\n"
-"\n"
-"Indien u een \"Expert\"-installatie uitvoert, komt u in de X configuratie "
-"wizard.\n"
-"Zie het corresponderende stuk in de handleiding voor meer informatie over\n"
-"deze wizard.\n"
-"\n"
-"Als u het bericht tijdens de test kunt zien en \"Ja\" antwoordt, zal DrakX\n"
-"doorgaan naar de volgende stap. Zoniet, dan betekent dat gewoon dat de\n"
-"configuratie onjuist was. De test zal in dat geval automatisch eindigen na\n"
-"10 seconden en het scherm herstellen."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"De eerste keer dat u de X configuratie probeert, zult u misschien niet\n"
-"erg tevreden zijn met het beeld (scherm te klein, naar links of naar rechts\n"
-"verschoven...). Daarom zal DrakX u vragen of de configuratie u bevalt,\n"
-"zelfs als X correct opstart. Het zal u tevens voorstellen om de "
-"configuratie\n"
-"te wijzigen door een lijst van geldige modi te tonen die het gevonden "
-"heeft,\n"
-"en u vragen er één te selecteren.\n"
-"\n"
-"Als een uiterste uitwijkmogelijkheid, als het u niet lukt X aan de praat te\n"
-"krijgen, kiest u \"Grafische kaart wijzigen\", selecteer \"Niet vermelde "
-"kaart\",en wanneer u gevraagd wordt welke server u wenst, kiest u \"FBDev\". "
-"Dit\n"
-"is een veilige optie die met iedere moderne grafische kaart werkt. Kiest u\n"
-"vervolgens \"Opnieuw testen\" om u ervan te vergewissen dat het werkt."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Tenslotte zal u gevraagd wordne of u de grafische interface wilt zien\n"
-"bij het opstarten. Merk op dat deze vraag ook gesteld wordt zelfs als\n"
-"u niet ervoor gekozen hebt om de configuratie te testen. Vanzelfsprekend\n"
-"wilt u \"Nee\" antwoorden als uw machine als server moet dienen, of\n"
-"indien u er niet in slaagde het beeld te configureren."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"De Mandrake Linux CD-ROM heeft een ingebouwde reddings-modus. U kunt\n"
-"er bij komen door op te starten van de CD-ROM, de \"F1\"-toets in te "
-"drukken\n"
-"tijdens het opstarten en \"rescue\" in te typen bij de aanwijzing. Maar in "
-"het\n"
-"geval dat uw computer niet kan opstarten van de CD-ROM, moet u terugkomen\n"
-"naar deze stap voor hulp in tenminste twee situaties:\n"
-"\n"
-" * wanneer de opstart-lader geïnstalleerd wordt, zal DrakX de boot sector "
-"(MBR)\n"
-"van uw eerste harde schijf overschrijven (tenzij u een andere "
-"opstartbeheerder\n"
-"gebruikt) zodat u op kunt starten met ofwel Windows ofwel GNU/Linux (ervan\n"
-"uitgaand dat u Windows op uw systeem heeft). Indien u Windows opnieuw\n"
-"moet installeren, zal het Microsoft installatieproces de boot sector "
-"herschrijven,\n"
-"en u zult dan niet meer in staat zijn GNU/Linux op te starten!\n"
-"\n"
-" * indien een probleem zich voordoet waardoor u GNU/Linux niet van de harde\n"
-"schijf kunt opstarten, zal deze diskette de enige manier zijn om GNU/Linux\n"
-"op te starten. Hij bevat een behoorlijk aantal systeemgereedschappen om\n"
-"uw systeem in oude staat te herstellen wanneer het gecrashed is door een\n"
-"stroomonderbreking, een ongelukkige typfout, een vergissing in een\n"
-"wachtwoord, of wat voor reden dan ook.\n"
-"\n"
-"Wanneer u op deze stap klikt, wordt u gevraagd een diskette te plaatsen in\n"
-"het diskettestation. De diskette moet leeg zijn of geen gegevens bevatten "
-"die\n"
-"u nog nodig heeft. Het is niet nodig om hem te formatteren omdat DrakX de\n"
-"gehele diskette zal herschrijven."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Op dit punt moet u kiezen waar op uw harde schijf u uw Mandrake Linux\n"
-"besturingssysteem wilt installeren. Als uw harde schijf leeg is of als een\n"
-"ander besturingssysteem alle beschikbare ruimte inneemt, dan zult u\n"
-"de harde schijf moeten partitioneren. Partitioneren houdt in dat u uw harde\n"
-"schijf in logische stukken onderverdeelt om ruimte te creëren voor uw "
-"nieuwe\n"
-"Mandrake Linux besturingssysteem.\n"
-"\n"
-"Omdat de effecten van het partitioneringsproces over het algemeen niet\n"
-"terug te draaien zijn, kan partitioneren intimiderend en spannend zijn voor\n"
-"een onervaren gebruiker. Gelukkig is er een wizard die dit proces\n"
-"vereenvoudigt. Raadpleeg de handleiding voordat u begint en neem de\n"
-"tijd.\n"
-"\n"
-"Indien u de installatie in expert-modus draait, komt u terecht in "
-"DiskDrake,\n"
-"het partitioneringsprogramma van Mandrake Linux, dat u in staat stelt\n"
-"om uw partities precies af te stellen. Zie het hoofdstuk over DiskDrake\n"
-"in de handleiding. Voor de installatie-interace kunt u de wizards gebruiken\n"
-"die hier beschreven zijn door op de \"Wizard\"-knop van het dialoogvenster\n"
-"te klikken.\n"
-"\n"
-"Indien er reeds partities gedefinieerd zijn, hetzij van een vorige "
-"installatie\n"
-"hetzij door een ander partitioneringsprogramma, dan kunt u deze\n"
-"eenvoudigweg selecteren om uw Linux-systeem op te installeren.\n"
-"\n"
-"Indien er geen partities gedefinieerd zijn, zult u ze moeten aanmaken met\n"
-"de wizard. Afhankelijk van de configuratie van uw harde schijf, zijn er\n"
-"verscheidene opties beschikbaar:\n"
-"\n"
-" * \"Gebruik vrije ruimte\": deze optie zal leiden tot het automatisch\n"
-"partitioneren van uw lege schijf/schijven. Er worden u verder geen vragen\n"
-"gesteld.\n"
-"\n"
-" * \"Gebruik bestaande partitie\": de wizard heeft één of meer bestaande\n"
-"Linux-partities op uw harde schijf gevonden. Indien u deze wilt gebruiken,\n"
-"kiest u deze optie.\n"
-"\n"
-" * \"Gebruik vrije ruime op de Windows-partitie\": indien Microsoft Windows\n"
-"op uw harde schijf is geïnstalleerd en alle beschikbare ruimte in beslag "
-"neemt,\n"
-"dient u vrije ruimte te creëren voor Linux-gegevens. Om dat te doen, kunt u "
-"uw\n"
-"Microsoft Windows-partitie en -gegevens wissen (zie \"Wis gehele schijf\"\n"
-"of \"Expert-modus\"-oplossingen) om uw Microsoft Windows-partitie te\n"
-"verkleinen. Het aanpassen van de grootte kan bewerkstelligd worden zonder\n"
-"verlies van enige gegevens. Deze oplossing is aanbevolen indien u zowel\n"
-"Mandrake Linux en Microsoft Windows op dezelfde computer wilt gebruiken.\n"
-"\n"
-"    Laat het goed tot u doordringen, voordat u deze optie kiest, dat uw\n"
-"Microsoft Windows partitie na afloop van deze procedure minder groot\n"
-"zal zijn dan hij nu is. U zult minder vrije ruimte hebben onder\n"
-"Microsoft Windows om uw gegevens op te slaan of om nieuwe software te\n"
-"installeren.\n"
-"\n"
-" * \"Gehele schijf wissen\": indien u alle gegevens en alle partities op uw\n"
-"harde schijf wilt verwijderen en vervangen door uw nieuwe Mandrake Linux-\n"
-"systeem, kiest u deze optie. Weest u voorzichtig met deze oplossing omdat u\n"
-"na bevestiging deze keuze niet meer ongedaan kunt maken.\n"
-"\n"
-"    !! Als u deze optie kiest, zullen alle gegevens op uw schijf verloren "
-"gaan. !!\n"
-"\n"
-" * \"Verwijder Windows\": dit wist simpelweg alles op de schijf en begint "
-"van\n"
-"voren af aan met partitioneren. Alle gegevens op uw schijf zullen verloren\n"
-"gaan.\n"
-"\n"
-"   !! Als u deze optie kiest, zullen alle gegevens op uw schijf verloren "
-"gaan. !!\n"
-"\n"
-" * \"Expert-modus\": kies deze optie indien u handmatig uw harde schijf "
-"wenst\n"
-"te partitioneren. Weest u voorzichtig - het is een krachtige maar riskante "
-"keuze.\n"
-"U kunt erg gemakkelijk al uw gegevens kwijtraken. Kiest u derhalve niet "
-"hiervoor\n"
-"tenzij u weet wat u doet."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Alstublieft. De installatieprocedure is voltooid en uw GNU/Linux-systeem\n"
-"is klaar voor gebruik. Klik gewoon op \"OK\" om uw computer opnieuw te\n"
-"starten. Indien u een meervoudig opstartsysteem gebruikt, kunt u GNU/Linux\n"
-"of Windows opstarten, welke u prefereert, zodra de computer de\n"
-"zelftestprocedure heeft doorlopen.\n"
-"\n"
-"De \"Geavanceerd\"-knop (alleen in Expert-modus) toont twee knoppen meer\n"
-"voor:\n"
-"\n"
-" * \"auto-installatiediskette aanmaken\": om een installatiediskette te\n"
-"creëren weke de gehele installatie automatisch zal uitvoeren zonder hulp\n"
-"van een beheerder, gelijkend op de installatie die u zonet heeft\n"
-"geconfigureerd.\n"
-"\n"
-"Merk op dat er twee verschillende opties zijn na het klikken van deze knop:\n"
-"\n"
-"    * \"Afspelen\". Dit is een gedeeltelijk geautomatiseerde installatie, "
-"omdat\n"
-"de partitioneringsstap (alleen deze) interactief blijft.\n"
-"\n"
-"    * \"Geautomatiseerd\". Volledig geautomatiseerde installatie: de harde\n"
-"schijf wordt volledig overschreven en alle gegevens erop raken verloren.\n"
-"\n"
-"    Deze mogelijkheid is erg handig wanneer u een grote hoeveelheid\n"
-"soortgelijke computers installeert. Zie ook de Auto-installatie afdeling op\n"
-"onze website.\n"
-"\n"
-" * \"Pakketselectie opslaan\"(*) : slaat de pakketselectie op zoals u hem\n"
-"eerder heeft gemaakt. Vervolgens, wanneer u een andere installatie\n"
-"uitvoert, plaatst u de diskette in het diskettestation en draait u het\n"
-"installatieprogramma waarna u naar het helpscherm gaat door op de\n"
-"[F1]-toets te drukken, en door ''linux defcfg=\"floppy\" '' in te geven.\n"
-"\n"
-"(*) U heeft een FAT-geformatteerde dskette nodig (om er één onder\n"
-"GNU/Linux te creëren, typt u \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Iedere nieuw gedefinieerde partitie moet geformatteerd worden voor\n"
-"gebruik (formatteren betekent het creëren van een bestandssysteem).\n"
-"\n"
-"Op dit moment wilt u wellicht enkele reeds bestaande partities\n"
-"herformatteren om alle gegevens erop te wissen. Indien u dat wenst\n"
-"te doen, selecteert u dan ook deze partities.\n"
-"\n"
-"Merk op dat het niet nodig is om alle reeds bestaande partities te\n"
-"herformatteren. U dient de partities waar het besturingssysteem op\n"
-"staat te herformatteren (zoals \"/\", \"/usr\" of \"/var\") maar u hoeft\n"
-"geen partities te herformatteren die gegevens bevatten die u wenst\n"
-"te bewaren (gewoonlijk \"/home\").\n"
-"\n"
-"Weest u alstublieft voorzichtig met het selecteren van partities. Na het\n"
-"formatteren zullen alle gegevens op de geselecteerde partities definitief\n"
-"verwijderd zijn.\n"
-"\n"
-"Klik op \"OK\" wanneer u klaar bent om de partities te formatteren.\n"
-"\n"
-"Klik op \"Annuleren\" indien u een andere partitie voor uw nieuwe\n"
-"Mandrake Linux besturingssysteem wilt kiezen.\n"
-"\n"
-"Klik op \"Geavanceerd\" indien u partities wenst te selcteren die op\n"
-"onleesbare blokken gecontroleerd zullen worden."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Uw nieuwe Mandrake Linux besturingssysteem wordt nu geïnstalleerd.\n"
-"Afhankelijk van het aantal pakketten dat u zult installeren en de snelheid\n"
-"van uw computer, kan deze operatie enkele minuten tot een behoorlijk lange\n"
-"tijd in beslag nemen.\n"
-"\n"
-"Even geduld alstublieft."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Op het moment dat u Mandrake Linux installeert, is het waarschijnlijk\n"
-"dat sommige pakketten vernieuwd zijn sinds het moment dat het werd\n"
-"uitgebracht. Sommige onvolkomenheden kunnen gerepareerd zijn en\n"
-"beveiligingsproblemen opgelost. Om u te kunnen laten profiteren van\n"
-"deze vernieuwingen kunt u ze nu downloaden van het internet.\n"
-"Kies \"Ja\" indien u een werkende internetverbinding heeft, of \"Nee\"\n"
-"als u liever later vernieuwde pakketten installeert.\n"
-"\n"
-"Wanneeru op \"Ja\" klikt verschijnt er een lijst van plaatsen waar\n"
-"vernieuwingen van kunnen worden opgehaald. Kies degene waar\n"
-"u zich het dichtst bij in de buurt bevindt. Daarna verschijnt een\n"
-"pakketselectieboom: ga de selectie na en druk op \"Installeren\"\n"
-"om de geselecteerde pakketten op te halen en te installeren. Druk\n"
-"op \"Annuleren\" om af te breken."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Voordat u verdergaat dient u eerst de voorwaarden in de licentie\n"
-"aandachtig te lezen. Zij beslaan de gehele Mandrake Linux distributie,\n"
-"en indien u niet akkoord gaat met alle voorwaarden erin klikt u op de\n"
-"\"Weigeren\"-knop hetgeen de installatie onmiddelijk zal afbreken. Om\n"
-"verder te gaan met de installatie, klikt u op de \"Accepteren\"-knop."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Op dit punt is het tijd om het beveiligingsniveau te kiezen voor deze\n"
-"computer. Als een vuistregel is aan te houden dat hoe meer blootgesteld\n"
-"de computer is, en hoe meer cruciale gegevens erop opgeslagen zijn,\n"
-"hoe hoger het beveiligingsniveau moet zijn. Echter, een hoger\n"
-"beveiligingsniveau gaat meestal ten koste van gebruiksgemak. U zij\n"
-"verwezen naar het MSEC-hoofdstuk van de \"Reference Manual\" voor\n"
-"meer informatie over de betekenis van deze niveaus.\n"
-"\n"
-"In het geval dat u niet weet wat te kiezen, behoudt u de standaard optie."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Op dit punt moet u kiezen welke partitie(s) gebruikt zullen worden voor\n"
-"de installatie van uw Mandrake Linux systeem. Indien er reeds partities\n"
-"gedefinieerd zijn, van een vorige GNU/Linux installatie of door een\n"
-"ander partitioneringsprogramma, kunt u bestaande partities gebruiken.\n"
-"In andere gevallen moeten er harde schijf-partities gedefinieerd worden.\n"
-"\n"
-"Om partities te creëren, dient u eerst een harde schijf te kiezen. U kunt "
-"de\n"
-"te partitioneren schijf selecteren door op \"hda\" te klikken voor de "
-"eerste\n"
-"IDE-schijf, \"hdb\" voor de tweede, \"sda\" voor de eerste SCSI-schijf\n"
-"enzovoort.\n"
-"\n"
-"Om de geselecteerde harde schijf te partitioneren, kunt u deze opties\n"
-"gebruiken:\n"
-"\n"
-" * \"Alles wissen\": deze optie verwijdert alle partities op de "
-"geselecteerde\n"
-"harde schijf.\n"
-"\n"
-" * \"Automatisch toewijzen\": deze optie creëert automatisch Ext2- en swap-\n"
-"partities in de vrije ruimte op uw harde schijf.\n"
-"\n"
-" * \"Meer\": geeft toegang tot extra opties:\n"
-"\n"
-"    * \"Partitietabel opslaan\": slaat de partitietabel op op een diskette. "
-"Nuttig om\n"
-"later zonodig de partitietabel te herstellen. Het is sterk aanbevolen deze "
-"stap uit\n"
-"te voeren.\n"
-"    * \"Partitietabl herstellen\": deze optie stelt u in staat om een eerder "
-"opgeslagen\n"
-"partitietabel van diskette te herstellen.\n"
-"\n"
-"    * \"Partitietabel redden\": indien uw partitietabel is beschadigd, kunt "
-"u deze\n"
-"trachten te herstellen met deze optie. Weest u voorzichtig en onthoud dat "
-"dit\n"
-"kan mislukken.\n"
-"\n"
-"    * \"Partitietabel herladen\": gooit alle veranderingen weg en laadt de\n"
-"partitietabel waarmee u begon\n"
-"\n"
-"    * \"Auto-koppeling verwisselbare media\": het deselecteren van deze "
-"optie\n"
-"dwingt gebruikers om handmatig verwisselbare media zoals diskettes en\n"
-"CD-ROMs te koppelen en te ontkoppelen.\n"
-"\n"
-" * \"Wizard\": gebruik deze optie indien u een wizard wenst te gebruiken om\n"
-"uw harde schijf mee te partitioneren. Dit is aanbevolen als u geen brede "
-"kennis\n"
-"heeft over partitioneren.\n"
-"\n"
-" * \"Ongedaan maken\": gebruik deze optie om uw wijzigingen te annuleren.\n"
-"\n"
-" * \"Schakel naar normale / expert modus\": laat extra handelingen toe op\n"
-"partities (Type, opties, formatteren) en geeft meer informatie.\n"
-"\n"
-" * \"Klaar\": wanneer u klaar bent met het partitioneren van uw harde "
-"schijf, zal dit\n"
-"de wijzigingen wegschrijven naar schijf.\n"
-"\n"
-"Merk op: u kunt iedere optie met behulp van het toetsenbord bereiken. "
-"Navigeer door\n"
-"de partities met behulp van [Tab] en [Omhoog/Omlaag] pijlen.\n"
-"\n"
-"Wanneer een partitie is geselecteerd, kunt u deze toetscombinaties "
-"gebruiken:\n"
-"\n"
-" * Ctrl+c om een nieuwe partitie te creëren (als een lege ruimte is "
-"geselecteerd);\n"
-"\n"
-" * Ctrl+d om een partitie te verwijderen;\n"
-"\n"
-" * Ctrl+m om het koppelpunt in te stellen.\n"
-"\n"
-"Voor meer informatie over de verschillende types bestandssystemen die er "
-"zijn,\n"
-"leest u het hoofdstuk 'ext2fs' van de ``Referentie Handleiding''.\n"
-"\n"
-"In het geval dat u op een PPC computer aan het installeren bent, zult u een "
-"kleine\n"
-"HFS \"bootstrap\"-partitie van tenminste 1MB willen creëren welke gebruikt "
-"zal\n"
-"worden door de yaboot opstartlader. Indien u liever de partitie wat groter "
-"maakt,\n"
-"zeg 50MB, dan vindt u het misschien een nuttige plek om een reserve kernel-\n"
-"en ramdisk beeldbestand in op te slaan voor opstart-noodgevallen."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Er is meer dan één Microsoft Windows partitie op uw harde schijf bespeurd.\n"
-"Kiest u degene die u wilt verkleinen om uw nieuwe Mandrake Linux\n"
-"besturingssysteem te kunnen installeren.\n"
-"\n"
-"Elke partitie wordt getoond als volgt: \"Linux naam\", \"Windows naam\"\n"
-"\"Capaciteit\".\n"
-"\n"
-"\"Linux naam\" is gestructureerd: \"harde schijf-type\", \"harde schijf-teken"
-"\",\n"
-"\"partitienummer\" (bijvoorbeeld \"hda1\").\n"
-"\n"
-"\"Harde schijf-type\" is \"hd\" indien uw harde schijf een IDE-schijf is en\n"
-"\"sd\" indien het een SCSI-schijf is.\n"
-"\n"
-"\"Harde schijf-teken\" is altijd een letter na \"hd\" of \"sd\". Bij IDE-\n"
-"harde schijven:\n"
-"\n"
-" * \"a\" betekent \"master apparaat op de primaire IDE controller\",\n"
-"\n"
-" * \"b\" betekent \"slave apparaat op de primaire IDE controller\",\n"
-"\n"
-" * \"c\" betekent \"master apparaat op de secundaire IDE controller\",\n"
-"\n"
-" * \"d\" betekent \"slave apparaat op de secundaire IDE controller\".\n"
-"\n"
-"Bij SCSI harde schijven betekent een \"a\" \"laagste SCSI ID\", een\"b\" "
-"\"op één na laagste SCSI ID\", enzovoort.\n"
-"\n"
-"\"Windows naam\" is de letter van uw harde schijf onder Windows (de\n"
-"eerste schijf of partitie wordt \"C:\" genoemd)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Even geduld a.u.b. Deze operatie kan enkele minuten duren."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX moet nu weten of u een standaard (\"Aanbevolen\") installatie wilt\n"
-"uitvoeren, of meer controle wilt kunnen uitoefenen (\"Expert\"). U heeft "
-"verder\n"
-"de keus tussen het uitvoeren van een nieuwe installatie en het opwaarderen\n"
-"van een reeds aanwezig Mandrake Linux systeem:\n"
-" * \"Installeren\" Wist het vorige systeem volledig. Echter, afhankelijk van "
-"hoe\n"
-"uw computer momenteel is ingesteld, is het mogelijk om oude (Linux- of "
-"andere)\n"
-"partities onveranderd te behouden.\n"
-"\n"
-" * \"Opwaarderen\" De installatieklasse laat u eenvoudigweg de pakketten\n"
-"vernieuwen die nu op uw Mandrake Linux-systeem geïnstalleerd zijn. Het\n"
-"behoudt de huidige partities van uw harde schijven zowel als de\n"
-"gebruikersconfiguraties. Alle andere configuratiestappen van een gewone\n"
-"installatie zullen beschikbaar blijven.\n"
-"\n"
-" * \"Alleen pakketten opwaarderen\" Deze gloednieuwe installatieklasse\n"
-"laat u een bestaand Mandrake Linux-systeem opwaarderen met behoud\n"
-"van de gehele systeemconfiguratie. Het is mogelijk om nieuwe pakketten\n"
-"toe te voegen aan de huidige installatie.\n"
-"\n"
-"Opwaarderen zou goed moeten gaan voor Mandrake Linux-systemen\n"
-"vanaf versie 8.1.\n"
-"\n"
-"Kies, afhankelijk van uw kennis van GNU/Linux, één van de volgende\n"
-"mogelijkheden:\n"
-"\n"
-" * Aanbevolen: kies dit als u nog nooit een GNU/Linux besturingssysteem "
-"hebt\n"
-"geïnstalleerd. De installatie zal erg gemakkelijk verlopen en er zullen u\n"
-"slechts enkele vragen gesteld worden.\n"
-"\n"
-" * Expert: als u een goede kennis bezit van GNU/Linux kunt u deze\n"
-"installatieklasse kiezen. De expert-installatie staat u toe een in hoge "
-"mate\n"
-"aangepaste installatie uit te voeren. Het beantwoorden van sommige vragen\n"
-"kan moeilijk zijn als u geen goede kennis van GNU/Linux bezit, dus kies dit\n"
-"niet tenzij u weet wat u doet."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normaal gesproken selecteert DrakX het juiste toetsenbord voor u\n"
-"(afhankelijk van de taal die u heeft gekozen) en zult u deze stap niet eens\n"
-"te zien krijgen. Het is echter mogelijk dat u een toetsenbord bezit dat "
-"niet\n"
-"exact correspondeert met uw taal: bijvoorbeeld, als u een Engels sprekende\n"
-"Zwitser bent wilt u nog steeds dat uw toetsenbordinstelling op Zwitsers "
-"staat.\n"
-"Of indien u Engels spreekt maar zich in Quebec bevindt, verkeert u "
-"misschien\n"
-"in dezelfde situatie. In beide gevallen zult u terug moeten gaan naar deze\n"
-"installatiestap en het juiste toetsenbord uit de lijst kiezen.\n"
-"\n"
-"Klik op de \"Meer\"-knop om de complete lijst van ondersteunde\n"
-"toetsenbordindelingen te zien."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Kiest u de gewenste taal voor installatie en gebruik op uw computer.\n"
-"\n"
-"Door te klikken op de \"Geavanceerd\"-knop kunt u andere talen selecteren\n"
-"die op uw werkstation geïnstalleerd moeten worden. Het selecteren van\n"
-"andere talen zal de taalspecifieke bestanden voor systeemdocumentatie\n"
-"en applicaties installeren. Als u bijvoorbeeld gastheer bent voor Spaanse\n"
-"gebruikers op uw machine, selecteert u Nederlands als eerste taal in het\n"
-"boom-overzicht en in de Geavanceerd-afdeling klikt u op de grijze ster "
-"naast\n"
-"\"Spaans|Spanje\".\n"
-"\n"
-"Merk op dat meerdere talen geïnstalleerd kunnen worden. Zodra u enige\n"
-"extra taalgebieden heeft geselecteerd, klikt u op de \"OK\"-knop om verder\n"
-"te gaan."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Normaal gesproken neemt DrakX aan dat u een tweeknops-muis heeft en\n"
-"zal deze instellen voor het nadoen van een derde knop. DrakX zoekt zelf uit\n"
-"of dit een PS/2-, seriële- of USB-muis is.\n"
-"\n"
-"Indien u een ander type muis wenst te specificeren, selecteer dan het "
-"juiste\n"
-"type uit de getoonde lijst.\n"
-"\n"
-"Indien u een andere muis kiest dan de standaardmuis, zult u een muis-\n"
-"testscherm te zien krijgen. Gebruik de knoppen en het wieltje om te\n"
-"controleren dat de instellingen goed zijn. Als de muis niet correct werkt,\n"
-"druk dan op de spatiebalk of Enter om te \"Annuleren\" en kies opnieuw."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Gelieve de juiste poort te kiezen. COM1 onder Windows wordt bijvoorbeeld\n"
-"\"ttyS0\" genoemd onder GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Dit is de meest cruciale beslissing voor de beveiliging van uw GNU/Linux\n"
-"systeem: u moet het \"root\"-wachtwoord invoeren. \"root\" is de systeem-\n"
-"beheerder en is de enige die geautoriseerd is om updates uit te voeren,\n"
-"gebruikers toe te voegen, de algehele systeemconfiguratie te wijzigen,\n"
-"enzovoort. Kortom, \"root\" kan alles doen! Daarom dient u een lastig\n"
-"te raden wachtwoord te kiezen - DrakX vertelt het u als het te makkelijk\n"
-"is. Zoals u kunt zien kunt u ervoor kiezen geen wachtwoord in te vullen,\n"
-"maar dit raden wij sterk af al was het maar om deze ene reden: denk\n"
-"niet dat alleen omdat u GNU/Linux opgestart heeft, uw andere\n"
-"besturingssystemen niet aangetast kunnen worden door vergissingen.\n"
-"Omdat \"root\" alle beperkingen kan overschrijden en onbedoeld alle\n"
-"gegevens op partities kan wissen door achteloos deze partities te\n"
-"benaderen, is het belangrijk dat het lastig is om \"root\" te worden.\n"
-"\n"
-"Het wachtwoord zou een mix van alfanumerieke karakters moeten zijn en\n"
-"tenminste 8 karakters lang. Schrijf nooit het \"root\"-wachtwoord op - dat\n"
-"maakt het te makkelijk om een systeem te compromitteren.\n"
-"\n"
-"Aan de andere kant, maak ook het wachtwoord niet te lang of gecompliceerd\n"
-"omdat u het moet kunnen onthouden zonder al te veel moeite. \n"
-"\n"
-"Het wachtwoord zal niet op het scherm getoond worden wanneer u het\n"
-"intypt. Vandaar dat u het wachtwoord tweemaal moet intypen om de kans\n"
-"te verminderen dat u een typfout maakt. Indien u toevallig dezelfde typfout\n"
-"twee keer maakt, dan zal dit \"incorrecte\" wachtwoord gebruikt moeten\n"
-"worden bij de eerste keer dat u verbinding maakt.\n"
-"\n"
-"In expert-modus wordt u gevraagd of u verbinding gaat maken met een\n"
-"authenticatie-server zoals NIS of LDAP.\n"
-"\n"
-"Indien uw netwerk het LDAP (of NIS) protocol gebruikt voor authenticatie,\n"
-"selecteer dan \"LDAP\" (of NIS). In het geval dat u dit niet weet, "
-"raadpleeg\n"
-"dan uw netwerkbeheerder.\n"
-"\n"
-"Indien uw computer niet verbonden is aan een beheerd netwerk, zult u\n"
-"willen kiezen voor \"Lokale bestanden\" als wijze van authenticatie."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO en GRUB zijn opstartladers voor GNU/Linux. Normaal gesproken\n"
-"is deze fase volledig geautomatiseerd. In feite analyseert DrakX de\n"
-"bootsector van de schijf en handelt al naar gelang hetgeen hier\n"
-"gevonden wordt:\n"
-"\n"
-"  * als een Windows bootsector gevonden is, zal deze vervangen\n"
-"worden door een GRUB/LILO bootsector. Dientengevolgde zult u\n"
-"ofwel GNU/Linux kunnen opstarten ofwel een ander besturingssysteem;\n"
-"\n"
-"  * als een GRUB- of LILO bootsector gevonden is zal deze vervangen\n"
-"worden door een nieuwe;\n"
-"\n"
-"In het geval dat er onzekerheid is, zal DrakX een dialoogvenster\n"
-"weergeven met diversie opties.\n"
-"\n"
-"  * \"Te gebruiken opstartlader\": u heeft drie keuzes:\n"
-"\n"
-"    * \"GRUB\": indien u GRUB prefereert (tekstmenu).\n"
-"\n"
-"    * \"LILO met grafisch menu\" indien u LILO met grafische interface\n"
-"prefereert.\n"
-"\n"
-"    * \"LILO met tekstmenu\": indien u LILO met tekstmenu-interface\n"
-"prefereert.\n"
-"\n"
-" * \"Opstartapparaat\": in de meeste gevallen zult u de standaardkeuze\n"
-"(\"/dev/hda\") niet veranderen, maar als u dat prefereert kan de\n"
-"opstartlader op de tweede harde schijf (\"/dev/hdb\") geïnstalleerd\n"
-"worden, of zelfs op een diskette (\"/dev/fd0\").\n"
-"\n"
-" * \"Periode voordat standaard beeldbestand opgestard wordt\":\n"
-"wanneer de computer opnieuw wordt opgestart, is dit de periode\n"
-"die de gebruiker heeft om een ander item te kiezen uit het opstartmenu\n"
-"voordat de standaardoptie gekozen wordt.\n"
-"\n"
-"!! Let op dat indien u geen opstartlader installeert (door hier \"Annuleren"
-"\"\n"
-"te kiezen) u ervoor moet zorgen dat u een manier heeft om uw Mandrake\n"
-"Linux-systeem op te starten! Zorg er tevens voor dat u weet wat u doet\n"
-"wanneer u één van de opties wijzigt. !!\n"
-"\n"
-"Onder de \"Geavanceerd\"-knop in dit dialoogvenster zitten veel\n"
-"geavanceerde opties, waar alleen een gevorderde gebruiker iets\n"
-"aan heeft.\n"
-"\n"
-"Nadat u de algemene opstartlader-parameters heeft geconfigureerd,\n"
-"wordt u de lijst van opstartopties getoond die beschikbaar zullen zijn\n"
-"bij het opstarten.\n"
-"\n"
-"Als er een ander besturingssysteem op uw computer geïnstalleerd is, zal\n"
-"het automatisch aan het opstartmenu worden toegevoegd. U kunt hier de\n"
-"bestaande opties fijn afregelen. Selecteer een item en klik op \"Wijzigen\"\n"
-"om hem te wijzigen of te verwijderen; \"Toevoegen\" creëert een nieuw\n"
-"item en \"Klaar\" gaat door naar de volgende installatiestap."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (de LInux LOader) en GRUB zijn opstart-laders: ze kunnen Linux of\n"
-"eender welk ander besturingssysteem opstarten op uw computer.\n"
-"Normaal gesproken worden deze besturingssystemen correct bespeurd en\n"
-"geïnstalleerd. Als dit niet het geval is, kunt u handmatig een ingang "
-"toevoegen\n"
-"op dit scherm. Let goed op dat u de juiste opties kiest.\n"
-"\n"
-"U wilt verder misschien niet iedereen toegang geven tot die "
-"besturingssystemen.\n"
-"In dat geval  kunt u de overeenkomstige ingangen verwijderen. Maar dan zult\n"
-"u echter wel een opstartdiskette nodig hebben om ze nog te kunnen opstarten!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Hier moet u ingeven waar u de informatie wenst te\n"
-"plaatsen die nodig is om GNU/Linux op te starten.\n"
-"\n"
-"\n"
-"Tenzij u precies weet wat u doet, kiest u \"Eerste sector van\n"
-"station (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Hier selecteren we een printsysteem voor uw computer. Andere\n"
-"besturingssystemen geven u er wellicht maar één, maar Mandrake\n"
-"heeft er drie.\n"
-"\n"
-" * \"pdq\" - hetgeen betekent \"print, don't queue\", is de keuze indien\n"
-"u een directe verbinding tussen uw computer en uw printer heeft en u\n"
-"in staat wilt zijn om printtaken snel te stoppen in het geval van\n"
-"papierstoringen en u niet beschikt over netwerkprinters. Het kan\n"
-"alleen omgaan met erg simpele netwerkprinttaken en is enigszins\n"
-"langzaam wanneer gebruikt in een netwerk. Kies \"pdq\" indien\n"
-"dit uw eerste kennismaking met GNU/Linux is. U kunt uw keuze\n"
-"achteraf nog wijzigen door PrinterDrake te draaien vanuit het\n"
-"Mandrake Controlecentrum op de expert-knop te klikken.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'' is uitstekend geschikt\n"
-"om naar uw lokale printer af te drukken maar ook naar de andere kant\n"
-"van de planeet. Het is eenvoudig en kan dienstdoen als een server of\n"
-"een client voor het antieke \"lpd\" printsysteem, zodat het compatibel\n"
-"is met voorgaande systemen. Het kent vele kunstjes, maar een\n"
-"basisinstallatie is bijna net zo eenvoudig als \"pdq\". Indien u dit nodig\n"
-"heeft om een \"lpd\"-server te emuleren, dient u de \"cups-lpd\"-daemon\n"
-"in te schakelen. CUPS heeft grafische schillen voor het afdrukken of\n"
-"het kiezen van printeropties.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. Dit systeem kan\n"
-"ongeveer hetzelfde als de anderen, maar het kan ook afdrukken naar\n"
-"printers gekoppeld aan een Novell Netwerk, omdat het het IPX-protocol\n"
-"ondersteunt. Verder kan het direct afdrukken naar shell-opdrachten.\n"
-"Indien u Novell nodig heeft of het afdrukken naar opdrachten zonder\n"
-"een afzonderlijk pijplijn-construct, gebruik dan lprNG. In andere gevallen\n"
-"verdient CUPS de voorkeur omdat het eenvoudiger is en beter werkt\n"
-"in netwerkverband."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX is nu bezig met het bespeuren van IDE-apparaten die in uw\n"
-"computer aanwezig zijn. Het zal tevens zoeken naar één of meer PCI\n"
-"SCSI-kaart(en) in uw systeem. Als een SCSI-kaart gevonden is, zal\n"
-"DrakX automatisch he geschikte stuurprogramma installeren.\n"
-"\n"
-"Omdat hardware-bespeuring niet altijd een stuk hardware bespeurt, zal\n"
-"DrakX u vragen om te bevestigen dat er een PCI SCSI-kaart aanwezig is.\n"
-"Klik op \"Ja\" indien u weet dat er een SCSI-kaart in uw machine is\n"
-"geïnstalleerd. U krijgt een lijst van SCSI-kaarten te zien waaruit u kunt\n"
-"kiezen. Klik op \"Nee\" indien u geen SCSI-hardware heeft. In het geval\n"
-"dat u niet zeker bent dan kunt u de lijst van bespeurde hardware in uw\n"
-"computer nagaan door \"Bekijk hardware-info\" te selecteren en op \"OK\"\n"
-"te klikken. Bekijk de lijst van hardware en klik vervolgens op de \"OK\"-\n"
-"knop om terug te gaan naar de SCSI-interface vraag.\n"
-"\n"
-"Indien u uw adapter handmatig moet aangeven zal DrakX vragen of u\n"
-"er opties voor wilt specificeren. U kunt het beste DrakX toestaan om\n"
-"de hardware te onderzoeken om na te gaan of er kaart-specifieke opties\n"
-"nodig zijn om de hardware te initialiseren. Dit werkt normaal gesproken\n"
-"goed.\n"
-"\n"
-"Als DrakX niet in staat is om te onderzoeken welke opties doorgegeven\n"
-"moeten worden, zult u handmatig het stuurprogramma van opties moeten\n"
-"voorzien. Gelieve de \"Gebruikershandleiding\" (hoofdstuk 3, paragraaf\n"
-"\"Het verzamelen van informatie over uw hardware\") na te lezen voor\n"
-"tips over hoe u de benodigde parameters uit de documentatie van uw\n"
-"hardware haalt, of van de webpagina van de fabrikant (als u \n"
-"internettoegang heeft), of uit Microsoft Windows (als u deze hardware\n"
-"met Windows heeft gebruikt op uw systeem)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hier ziet u verscheidene paramaters die betrekking hebben op uw computer.\n"
-"Afhankelijk van welke hardware u heeft, kunt u al dan niet (zie hieronder):\n"
-"\n"
-" * \"Muis\": de huidige muisconfiguratie nagaan en zonodig op deze knop "
-"klikken\n"
-"om hem aan te passen.\n"
-"\n"
-" * \"Toetsenbord\": de huidige toetsenbordindeling nagaan en zonodig op "
-"deze\n"
-"knop klikken om hem aan te passen.\n"
-"\n"
-" * \"Tijdzone\": Normaal gesproken raadt DrakX uw tijdzone aan de hand van "
-"de\n"
-"taal die u gekozen heeft. Maar hier, net zoals bij de keuze voor een "
-"toetsenbord,\n"
-"hoeft u zich niet in het land te bevinden dat correspondeert met de gekozen "
-"taal.\n"
-"Daarom is het mogelijk dat u op de \"Tijdzone\"-knop moet klikken om de klok "
-"in\n"
-"te stellen aan de hand van de tijdzone waarin u zich bevindt.\n"
-"\n"
-" * \"Printer\": klikken op de \"Geen printer\"-knop zal de "
-"printerconfiguratie-wizard\n"
-"openen.\n"
-"\n"
-" * \"Geluidskaart\": indien een geluidskaart bespeurd is op uw systeem, "
-"wordt dat\n"
-"hier weergegeven. Het is niet mogelijk dit aan te passen gedurende de "
-"installatie.\n"
-"\n"
-" * \"TV-kaart\": indien een TV-kaart bespeurd is op uw systeem, wordt dat "
-"hier\n"
-"weergegeven. Het is niet mogelijk dit aan te passen gedurende de "
-"installatie.\n"
-"\n"
-"* \"ISDN-kaart\": indien een ISDN-kaart bespeurd is op uw systeem, wordt "
-"dat\n"
-"hier weergegeven. U kunt op de knop klikken om de parameters aan te passen\n"
-"die erbij horen."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Kies de harde schijf die u wilt wissen om uw nieuwe\n"
-"Mandrake Linux partitie op te installeren. Wees voorzichtig, alle data die\n"
-"op deze schijf staat zal verloren gaan, en niet terug te halen zijn!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik op \"OK\" wanneer u alle gegevens en partities die aanwezig zijn \n"
-"op deze harde schijf wilt wissen. Wees voorzichtig, want na het klikken \n"
-"op \"OK\" zult u niet in staat zijn om wat voor op schijf aanwezige "
-"gegevens \n"
-"of partities dan ook terug te halen, met inbegrip van alle Windows-"
-"gegevens.\n"
-"\n"
-"Klik op \"Annuleren\" om deze operatie te annuleren zonder daarbij \n"
-"gegevens of partities aanwezig op schijf te verliezen."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "U dient tevens %s te formatteren"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"U heeft de volgende server(s) geselecteerd: %s\n"
-"\n"
-"\n"
-"Deze servers worden standaard geactiveerd. Ze hebben geen bekende\n"
-"beveiligingsproblemen, maar het is mogelijk dat er nieuwe gevonden worden.\n"
-"Zorg er in dat geval voor ze zo spoedig mogelijk op te waarderen.\n"
-"\n"
-"\n"
-"Weet u zeker dat u deze servers wilt installeren?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan niet uitzenden zonder NIS-domein"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-"Plaats een met het FAT-bestandssysteem geformatteerde diskette in station %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Deze diskette is niet FAT-geformatteerd"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Om deze opgeslagen pakketselectie te gebruiken, start u de installatie \n"
-"met ''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fout bij het lezen van bestand %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sommige hardware op uw computer heeft ''fabrikantsgebonden'' drivers \n"
-"nodig om te kunnen functioneren. U kunt informatie hierover vinden op: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"U moet een root-partitie hebben.\n"
-"Hiervoor dient u een partitie aan te maken (of op een bestaande partitie "
-"teklikken). Daarna kiest u de actie ``Koppelpunt'' en stelt u dit i nop `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "U moet een swap-partitie hebben"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"U heeft geen swap-partitie!\n"
-"\n"
-"Toch verdergaan?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-"U moet een partitie met FAT-bestandssysteem gekoppeld hebben aan /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Gebruik vrije ruimte"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Niet genoeg vrije ruimte om nieuwe partities te maken"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Gebruik een bestaande partitie"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Er is geen bestaande partitie om te gebruiken"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik de Windows partitie voor loopback "
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Welke partitie wenst u te gebruiken voor Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Kies de grootte"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Root-partitie-grootte in MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitie-grootte in MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik de vrije ruimte op de Windows partitie"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Van welke partitie wilt u de grootte veranderen?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Bezig met berekenen van Windows bestandssysteemgrenzen"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"De FAT grootte-aanpasser was niet instaat met uw partitie om te gaan, \n"
-"dit is fout gegaan: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Uw Windows partitie is te gefragmenteerd, start a.u.b. eerst ``defrag'' eerst"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WAARSCHUWING!\n"
-"\n"
-"DrakX moet nu de grootte van uw Windows-partitie aanpassen. Wees "
-"voorzichtig:\n"
-"deze operatie is gevaarlijk. Als u dit niet reeds gedaan heeft, dient u "
-"eerst de\n"
-"installatie af te breken, scandisk (en eventueel defrag) onder Windows te "
-"draaien,\n"
-"en daarna de installatie opnieuw te starten. Maakt u ook een "
-"veiligheidskopie van uw data.\n"
-"Als u zeker bent, klik dan OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Welke grootte wilt u gebruiken om windows op?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partitie %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT grootte-aanpassing mislukt: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Er is geen FAT partitie om de grootte van aan te passen of om als \n"
-"loopback te gebruiken (of er is te weinig ruimte over)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Volledige harde schijf wissen"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Verwijder Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U heeft meer dan één harde schijf, op welke wilt u Linux installeren?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"ALLE bestaande partities en de data die ze bevatten, zal worden gewist van "
-"schijf %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Aangepaste schijf-partitionering"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"U kan nu uw schijf %s partitioneren.\n"
-"Vergeet niet op te slaan met `w' wanneer u klaar bent."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "U heeft niet genoeg vrije ruimte op uw Windows partitie"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ik kan geen partitie meer toevoegen"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "De DrakX partitie wizard heeft de volgende oplossingen gevonden:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislukt: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Bezig met opstarten van het netwerk"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Bezig met stoppen van het netwerk"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Er is een fout opgetreden, maar ik weet niet hoe deze te behandelen.\n"
-"Als u verdergaat, is dit op eigen risico."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dubbel koppelpunt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sommige belangrijke pakketen werden niet juist\n"
-"geïnstalleerd. Of uw cdrom drive of uw cdrom is defect.\n"
-"Controleer de cdrom op een geïnstalleerde computer met\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom bij %s!"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Geen diskettestation beschikbaar"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Overgang naar stap `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Uw systeem heeft weinig bronnen beschikbaar. U zou problemen kunnen\n"
-"ondervinden bij het installeren van Mandrake Linux. Als dit gebeurt,\n"
-"kunt u een text installatie proberen. Om dit te doen, drukt u op `F1'\n"
-"terwijl de CDROM opstart, en dan voert u `text' in."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installatie-klasse"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Gelieve een van de volgende installatieklasses te kiezen:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "De totale grootte voor de geselecteerde groepen is ongeveer %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Als u minder dan deze grootte wenst te installeren,\n"
-"selectere dan het percentage pakketten dat u wenst te installeren.\n"
-"\n"
-"Een laag percentage zal enkel de belangrijkste pakketten installeren;\n"
-"een percentage van 100%% zal alle geselecteerde pakketten installeren."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"U heeft schijfruimte voor slechts %d%% van deze pakketten.\n"
-"\n"
-"Als u minder wenst te installeren,\n"
-"selecteer dan het percentage pakketten dat u wenst te installeren.\n"
-"Een laag percentage zal enkel de belangrijkste pakketten installeren;\n"
-"een percentage van %d%% zal alle geselecteerde pakketten installeren."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Het is mogelijk preciezer te kiezen in de volgende stap."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentage pakketten om te installeren"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakket-groep Selectie"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuele pakketselectie"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Slecht pakket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versie: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grootte: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrijkheid: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "U kan dit pakket niet selecteren omdat er te weinig vrije ruimte is"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "De volgende pakketten zullen geïnstalleerd worden"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "De volgende pakketten zullen gedeïnstalleerd worden"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "U kan dit pakket niet (de)selecteren"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dit is een verplicht pakket, het kan niet gedeselecteerd worden"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan dit pakket niet deselecteren. Het is al geinstalleerd."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dit pakket moet opgewaardeerd worden.\n"
-"Weet u zeker dat u het wenst te deselecteren?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kunt dit pakket niet deselecteren. Het moet opgewaardeerd worden."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Toon automatisch geselecteerde pakketten"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installeren"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Laden/Opslaan op diskette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Bezig met vernieuwen van pakket-selectie"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimale installatie"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Kies de pakketten die u wenst te installeren"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Bezig met installeren"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Bezig met schatten"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tijd over "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Bezig met voorbereiden van installatie, even geduld alstublieft"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakketten"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Bezig met installeren van pakket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepteren"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Weigeren"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verwissel uw CD-ROM!\n"
-"\n"
-"\n"
-"Gelieve de CD-ROM met als naam \"%s\" in uw station te plaatsen en Ok te "
-"kiezen wanneer u klaar bent.\n"
-"Als u deze CD niet heeft, klik dan Annuleren om verdere installatie vanaf "
-"deze CD te vermijden."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Toch verdergaan?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Er was een fout bij het sorteren van de pakketten:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Er was een fout bij het installeren van de pakketten:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Waarschuwing\n"
-"\n"
-"Leest u aandachtig de voorwaarden hieronder. Als u het niet eens bent \n"
-"met eender welk onderdeel, is het u niet toegestaan om de volgende \n"
-"CD-media te installeren. Klik op 'Weigeren' om de installatie voort te \n"
-"zetten zonder deze media te gebruiken.\n"
-"\n"
-"\n"
-"Sommige componenten die op de volgende CD-media staan staan niet \n"
-"onder de GPL-licentie of dergelijke overeenkomsten. Ieder van deze \n"
-"componenten valt onder de regels en voorwaarden van zijn eigen \n"
-"specifieke licentie. Leest u dergelijke licenties alstublieft aandachtig \n"
-"en ga ermee akkoord voordat u de genoemde componenten gebruikt \n"
-"of opnieuw distribueert. \n"
-"Dergelijke licenties zullen in het algemeen het overnemen, dupliceren \n"
-"(behalve voor reservekopie-doeleinden), herdistribueren, reverse \n"
-"engineering, de-assemblage, de-compilatie of aanpassing van het \n"
-"component voorkomen. Het doorbreken van deze overeenkomst zal \n"
-"onmiddelijk uw rechten onder de specifieke licentie opheffen. Tenzij \n"
-"de specifieke licentie u zulke rechten toekent, kunt u in het algemeen \n"
-"de programma's niet op meer dan één machine installeren, of hen \n"
-"aanpassen voor gebruik over een netwerk. Als u twijfelt, neem dan \n"
-"alstublieft rechtstreeks contact op met de distributeur van het \n"
-"component. \n"
-"Het doorgeven aan een derde partij of het kopiëren van dergelijke \n"
-"componenten is in het algemeen verboden.\n"
-"\n"
-"\n"
-"Alle rechten op de componenten van de volgende CD-media behoren \n"
-"aan hun respectievelijke auteurs en zijn beschermd door wetten met \n"
-"betrekking tot intellectueel eigendom en copyright van software- \n"
-"programma's. \n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Er is een fout opgetreden"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Weet u zeker dat u het installatieprogramma wilt verlaten?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licentie overeenkomst"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Toetsenbord"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Gelieve uw toetsenbord-layout te kiezen."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Dit is de volledige lijst van beschikbare toetsenborden"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Welke installatie-klasse wenst u?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installatie/Update"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Is dit een installatie of een opwaardering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Aanbevolen"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Opwaarderen"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Alleen pakketten opwaarderen"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Gelieve het type van uw muis te kiezen."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Met welke seriële poort is uw muis verbonden?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Muisknoppen emuleren"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emuleren van knop 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emuleren van knop 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Bezig met configureren van PCMCIA-kaarten..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE-Configuratie"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Geen beschikbare partities"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Bezig met scannen van partities om mount punten te vinden"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Selecteer de koppelpunten"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ik kan uw partitietabel niet lezen, ze is te corrupt voor mij :-(\n"
-"Ik kan proberen door te gaan en de slechte partities verwijderen\n"
-"(ALLE DATA zal worden gewist!).\n"
-"De andere oplossing is om DrakX de de partitie tabel niet te laten "
-"aanpassen.\n"
-"(de fout is %s)\n"
-"\n"
-"Gaat u ermee akkoord alle partities te verliezen?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kon de partitietabel niet correct inlezen.\n"
-"Als u verdergaat, is dit op eigen risico!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Er is geen vrije ruimte voor een \"bootstrap\" van 1MB! De installatie zal "
-"doorgaan, maar om uw systeem op te starten zult u de bootstrap partitie in "
-"DiskDrake moeten creëren."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Geen \"root\"-partitie gevonden om op te waarderen"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root-partitie"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Wat is de root-partitie (/) van uw systeem?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"U dient te herstarten om de wijzigingen in de partitietabel te activeren."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Kies de partities die u wenst te formatteren"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Slechte blocks checken?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Bezig met formatteren van partities"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Bezig met aanmaken en formatteren van bestand %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Niet genoeg swap voor de installatie, voeg er wat toe"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Bezig met zoeken naar beschikbare pakketten"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Bezig met zoeken naar pakketten om op te waarderen"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Uw systeem heeft niet genoeg ruimte over voor installatie of opwaardering (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Volledig (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaal (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Aanbevolen (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Gelieve te kiezen of u de pakketselectie wilt laden of opslaan op diskette.\n"
-"Het formaat is dezelfde als de met auto_install gegenereerde diskettes."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Laden van diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Bezig met het laden van diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakket-selectie"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Plaats een diskette met de pakket-selectie in diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Schrijven naar floppy"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "De geselecteerde grootte is meer dan de beschikbare ruimte"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Type installatie"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"U heeft geen enkele pakketgroep geselecteerd\n"
-"Gelieve de minimale installatie die u wenst te kiezen."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Met X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Met basis-documentatie (aanbevolen!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Werkelijk minimale installatie (in het bijzonder geen urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Als u alle CDs in de lijst hierboven heeft, klik dan Ok.\n"
-"Als u geen enkele van die CDs heeft, klik dan Annuleren.\n"
-"Als maar enkele CDs zoek zijn, deselecteer ze dan, en klik Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-Rom genaamd \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Bezig met voorbereiden van installatie"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Bezig met installeren van pakket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Installatie na configuratie"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Plaats de gebruikte Opstartdiskette in station %s alstublieft"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Plaats de \"Modules Vernieuwen\"-diskette in station %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"U bent nu in staat software bedoeld voor encryptie te downloaden.\n"
-"\n"
-"WAARSCHUWING:\n"
-"\n"
-"Ten gevolge van verschillende algemene vereisten met betrekking tot deze\n"
-"software en opgelegd door verscheidene jurisdicties, dienen klanten en/of\n"
-"eindgebruikers van deze software zich ervan te vergewissen dat de wetten\n"
-"van hun jurisdictie hen toestaan  deze software te downloaden,\n"
-"opslaan en/of te gebruiken.\n"
-"\n"
-"Daarnaast zal de klant en/of eindgebruiker in het bijzonder erop letten "
-"niet\n"
-"de wetten van zijn/hun jurisdictie te overtreden. Indien de klant en/of\n"
-"eindgebruiker de bepalingen van de van toepassing zijnde wetten niet\n"
-"respecteert, zullen hem aanzienlijke sancties worden opgelegd.\n"
-"\n"
-"In geen geval zal Mandrakesoft, noch haar fabrikanten en/of leveranciers\n"
-"aansprakelijk gehouden worden voor welke speciale, indirecte of incidentele\n"
-"schade dan ook (inclusief, maar niet beperkt tot gederfde winsten, "
-"onderbreking\n"
-"van zakendoen, verlies van commerciële gegevens en andere financiële\n"
-"verliezen, en eventuele aansprakelijkheden en vergoedingen die betaald\n"
-"moeten worden als gevolg van een beslissing van een gerechtshof)\n"
-"voortkomend uit gebruik, bezit, of alleen het downloaden van deze software,\n"
-"waartoe de klant en/of eindgebruiker eventueel toegang zou kunnen hebben\n"
-"na de voorliggende overeenkomst te hebben getekend.\n"
-"\n"
-"\n"
-"Voor inlichtingen met betrekking tot deze overeenkomst, neemt u contact op "
-"met\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"U bent nu in de gelegenheid om vernieuwde pakketten te downloaden\n"
-"die uitgebracht zijn nadat de distributie uitkwam.\n"
-"\n"
-"U kunt beveiligingsreparaties of reparaties van programmafouten verkrijgen,\n"
-"maar u heeft wel een geconfigureerde internetverbinding nodig om verderte "
-"gaan.\n"
-"\n"
-"Wenst u de vernieuwde pakketten te installeren?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Bezig met verbinden met de Mandrake Linux website om de lijst met "
-"beschikbare mirrors te verkrijgen"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies een `mirror' om de pakketten van af te halen"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Bezig met de `mirror' te contacteren om de lijst met beschikbarepakketten te "
-"verkrijgen"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wat is uw tijdzone?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardware-klok ingesteld op GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische tijdssynchronisatie (met gebruik van NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Netwerk CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Geen printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Heeft u een ISA geluidskaart?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Draai \"sndconfig\" na de installatie om uw geluidskaart te configureren"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Geen geluidskaart bespeurd. Probeer \"harddrake\" na de installatie"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Overzicht"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Muis"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tijdzone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Interne ISDN kaart"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Geluidskaart"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kaart"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Bestanden op deze computer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root-wachtwoord instellen"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Geen wachtwoord"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dit wachtwoord is te makkelijk (moet tenminste %d tekens lang zijn)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Authenticatie"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Authenticatie LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Authenticatie NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Een bootdiskette zorgt ervoor dat u nog in uw Linux-systeem kan zonder\n"
-"afhankelijk te zijn van de normale bootloader. Dit is handig als u LILO\n"
-"(of grub) niet wil installeren op uw systeem, of als een ander "
-"besturingssysteem\n"
-"LILO verwijdert, of LILO werkt niet met uw hardware-configuratie.\n"
-"Een bootdiskette kan ook gebruikt worden met het Mandrake-reddings-image,\n"
-"waardoor het veel makkelijker wordt om te herstellen van grote systeem-\n"
-"fouten. Wil u nu een bootdiskette aanmaken voor uw systeem?\n"
-"Stop dan een diskette in het station en druk op \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Eerste diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Tweede diskettestation"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Overslaan"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Een bootdiskette zorgt ervoor dat u nog in uw Linux-systeem kan zonder\n"
-"afhankelijk te zijn van de normale bootloader. Dit is handig als u LILO\n"
-"(of grub) niet wil installeren op uw systeem, of als een ander "
-"besturingssysteem\n"
-"LILO verwijdert, of LILO werkt niet met uw hardware-configuratie.\n"
-"Een bootdiskette kan ook gebruikt worden met het Mandrake-reddings-image,\n"
-"waardoor het veel makkelijker wordt om te herstellen van grote systeem-\n"
-"fouten. Wil u nu een opstartdiskette aanmaken voor uw systeem?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(WAARSCHUWING! U gebruikt XFS voor uw root-partitie,\n"
-"het creëren van een opstartdiskette op een 1.44MB-diskette\n"
-"zal hoogstwaarschijnlijk mislukken omdat XFS een zeer groot\n"
-"stuurprogramma benodigt)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Sorry, geen diskettestation beschikbaar"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies het diskettestation waarmee u de opstart-diskette wenst te maken"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Plaats een diskette in station %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Bezig met het aanmaken van de opstart-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Bezig met klaarmaken van opstartlader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Het heeft er alle schijn van dat u een OldWorld-\n"
-" of Onbekende machine heeft. De yaboot opstartlader \n"
-" zal voor u niet werken.\n"
-"De installatie zal doorgaan, maar u zult BootX nodig \n"
-"hebben om uw machine op te starten"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Wenst u aboot te gebruiken?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fout bij het installeren van aboot,\n"
-"toch proberen te installeren, zelfs als dat de eerste partitie vernietigt?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Bezig met opstart-lader installeren"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"De installatie van de bootloader is mislukt. De volgende fout werd gevonden:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Wellicht is het nodig om uw Open Firmware opstart-apparaat \n"
-" te veranderen om de opstartlader te activeren. Wanneer u geen \n"
-" opstartlader-prompt bij het opnieuw opstarten ziet, houdt dan \n"
-" Command-Option-O-F ingedrukt bij het opstarten en voer in: \n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Vervolgens voert u in: shut-down\n"
-"Bij de volgende keer opstarten zou u dan de opstartlader-prompt \n"
-"moeten zien."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Plaats een lege floppy in station %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Bezig met aanmaken van auto-installatiediskette"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Sommige stappen zijn nog niet voltooid.\n"
-"\n"
-"Weet u zeker dat u op dit moment wilt beëindigen?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gefeliciteerd, de installatie is voltooid. \n"
-"Verwijder de opstartmedia en druk op Enter om opnieuw op te starten.\n"
-"\n"
-"\n"
-"Voor informatie over verbeteringen die voor deze versie van Mandrake Linux\n"
-"beschikbaar zijn, raadpleegt u de Errata, beschikbaar van:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/8.2errata.php3\n"
-"\n"
-"Informatie over het configureren van uw systeem is beschikbaar in het\n"
-"\"post install\"-hoofdstuk van de Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Maak auto-installatiediskette aan"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Desgewenst kan de auto-installatie volledig geautomatiseerd worden,\n"
-"in dat geval zal het de harde schijf overnemen!\n"
-"(Deze functie is bedoeld voor het installeren op een andere machine.)\n"
-"\n"
-"Wellicht geeft u de voorkeur aan het herhalen van de installatie.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Geautomatiseerd"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Herhalen"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Pakket-selectie opslaan"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installatie %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> tussen elementen | <Spatie> selecteert | <F12> volgend "
-"scherm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu is afwezig!"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "ontbrekende console-hulp"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Kies een bestand"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Geavanceerd"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Basis"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Even geduld"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-"Boom\n"
-"Uitbreiden"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-"Boom\n"
-"Inklappen"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Schakelen tussen gewoon en per-groep-gesorteerd"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Slechte keuze, probeer nog eens\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Uw keuze? (standaard %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr "Items die u dient in te vullen:%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Uw keuze? (0/1, standaard '%s')"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Knop '%s':%s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Wilt u op deze knop klikken?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Uw keuze? (standaard '%s'%s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Er zijn vele keuzes mogelijk (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Gelieve het eerste nummer van het 10-bereik dat u wilt bewerken,\n"
-"te kiezen, of geef eenvoudigweg Enter om verder te gaan.\n"
-"Uw keuze?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Let op, een label is veranderd:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Opnieuw invoeren"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tsjechisch (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Duits"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaans"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fins"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Frans"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noors"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pools"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russisch"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Zweeds"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK toetsenbord"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US toetsenbord"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanees"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeens (oud)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeens (typmachine)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeens (fonetisch)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbeidzjan (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgisch"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaars (fonetisch)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaars (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Braziliaans (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusiaans"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Zwitsers (Duitse layout)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Zwitsers (Franse layout)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tsjechisch (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Duits (geen dode toetsen)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Deens"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noorwegen)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Zweeds)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Ests"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisch (\"Russische\" layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisch (\"Latin\" layout)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grieks"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongaars"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatisch"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelisch"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelisch (Fonetisch)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraans"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "IJslands"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiaans"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japans 106 toetsen"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreaans toetsenbord"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latijns-Amerikaans"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuaans AZERTY (oud)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuaans AZERTY (nieuw)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuaans \"nummer-rij\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuaans \"fonetisch\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lets"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonisch"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nederlands"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pools (qwerty layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pools (qwertz layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadees (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Roemeens (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Roemeens (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Roemeens (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloveens"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Servisch (cyrillisch)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai-toetsenbord"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadzjikisch toetsenbord"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (traditioneel \"F\"-model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (modern \"Q\"-model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Oekraïens"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US toetsenbord (internationaal)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"nummer-rij\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Joegoslavisch (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Rechter Alt-knop"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Shift-toetsen tegelijkertijd"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control- en Shift-toetsen tegelijkertijd"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock-toets"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- en Alt-toetsen tegelijkertijd"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt- en Shift-toetsen tegelijkertijd"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Menu\"-toets"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Linker \"Windows\"-toets"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Rechter \"Windows\"-toets"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circulaire mounts: %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Verwijder eerst de logische delen\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Ondersteuning voor PCMCIA bestaat niet meer voor 2.2 kernels. Gelieve een "
-"2.4 kernel te gebruiken."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - muis"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Algemene PS/2 wielmuis"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knop"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Algemene 2-knopsmuis"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Algemeen"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wiel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriëel"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Algemene 3-knopsmuis"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech-muis (seriëel, oud C7-type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus muis"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knoppen"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knoppen"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "geen"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Geen muis"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Test uw muis a.u.b."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Welk type muis heeft u?"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG UW WIELTJE"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Fins"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Volgende ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Vorige"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Is dit correct?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Verbinden met het Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"De meest gebruikte manier om te verbinden met adsl is met\n"
-"ppoe. Sommige verbindingen gebruiken pptp, enkele gebruiken\n"
-"dhcp. Als u het niet weet, kiest u 'gebruik pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gebruik DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gebruik pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gebruik pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Welke dhcp client wenst u te gebruiken?\n"
-"Standaard is dit dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Er is geen ethernet netwerk adapter op uw systeem gevonden.\n"
-"Ik kan dit type connectie niet opzetten."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Kies de netwerk interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kies a.u.b. met welke netwerkkaart u met het Internet wilt verbinden"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Geen netwerkkaart gevonden"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Bezig met configureren van netwerk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Gelieve uw hostnaam in te voeren als u deze kent.\n"
-"Sommige DHCP servers hebben de hostnaam nodig om te werken.\n"
-"Het moet een volledige hostnaam zijn, zoals ``mybox.mylab.myco.com''.\n"
-"U mag ook het IP-adres van de gateway invoeren als u er een heeft."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Host naam:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Netwerk-configuratie wizard"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Extern ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Wat voor een ISDN connectie heeft u?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Welke ISDN-configuratie prefereert u?\n"
-"\n"
-"* De Oude configuratie gebruikt isdn4net. Het bevat\n"
-"  krachtige gereedschappen, maar is lastig te configureren\n"
-"  en niet-standaard.\n"
-"\n"
-"* De Nieuwe configuratie is gemakkelijker te begrijpen, meer\n"
-"  standaard maar bevat minder gereedschappen.\n"
-"\n"
-"Wij bevelen de lichtere configuratie aan.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nieuwe configuratie (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Oude configuratie (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Configuratie"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Selecteer uw provider.\n"
-" Als uw provider niet in de lijst staat, kiest u Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europe protocol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europees protocol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocol voor de rest van de wereld"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocol voor de rest van de wereld \n"
-" geen D-Channel (geleasde lijnen)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Welk protocol wenst u te gebruiken?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Welk type kaart heeft u?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ik weet het niet"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Als u een ISA kaart bezit, zouden de waardes op het volgende scherm moeten "
-"kloppen.\n"
-"\n"
-"Als  u een PCMCIA kaart bezit, moet u het irq en io van uw kaart weten.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Annuleren"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Verder"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Welke is uw ISDN kaart?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ik heb een ISDN PCI kaart gevonden, maar ik ken het merk niet. Selecteer a.u."
-"b. een PCI kaart op het volgende scherm."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Geen ISDN PCI kaart gevonden. Selecteer a.u.b. uw kaart op het volgende "
-"scherm."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Met welke seriële poort is uw modem verbonden?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Inbel-opties"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Verbindingsnaam"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefoonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Aanmeldingsnaam"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Gebaseerd op een script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Gebaseerd op een terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeinnaam"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-server (optioneel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-server (optioneel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt nu de verbrinding verbreken of uw connectie herconfigureren."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt uw connectie herconfigureren"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "U bent op dit moment aangesloten op het Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"U kunt verbinding maken met het Internet of uw connectie herconfigureren"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "U bent op dit moment niet aangesloten op het Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Verbinden"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Verbinding verbreken"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configureer de verbinding"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet verbinding & configuratie"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "We gaan nu de %s -verbinding configureren."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"We gaan nu de %s -verbinding configureren.\n"
-"\n"
-"\n"
-"Klik op OK om door te gaan."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netwerk-configuratie"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Omdat u een netwerk-installatie uitvoert, is uw netwerk reeds "
-"geconfigureerd.\n"
-"Klik op OK om uw configuratie te behouden, of op Annuleren om uw Internet & "
-"Netwerkverbinding opnieuw te configureren.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Welkom bij de Netwerk Configuratie Wizard\n"
-"\n"
-"We staan op het punt uw internet/netwerkverbinding te configureren.\n"
-"Als u de auto-detectie niet wilt gebruiken, deselecteer het aankruisvakje "
-"dan.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Kies het profiel om te configureren"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Gebruik auto-detectie"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Bezig met het detecteren van apparaten..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normale modemverbinding"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "gevonden op poort %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-verbinding"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s ontdekt"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL-verbinding"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "gevonden op interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelverbinding"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "kabelverbinding gevonden"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN-verbinding"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(en) gevonden"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Selecteer de verbinding die u wenst te configureren"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"U heeft meerdere manieren om te verbinden met het Internet geconfigureerd.\n"
-"Kies degene die u wenst te gebruiken.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetverbinding"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Wenst u bij aboot uw connectie te starten?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netwerk configuratie"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Het netwerk dient herstart te worden"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Een probleem deed zich voor bij het herstarten van het netwerk:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gefeliciteerd, de netwerk- en internetconfiguratie is af.\n"
-"\n"
-"De configuratie zal nu worden toegepast op uw systeem.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"We raden u aan om nadat dit gebeurd is, uw X omgeving\n"
-"te herstarten om het hostnaam-veranderingprobleem\n"
-"te voorkomen."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Er zijn problemen opgetreden tijdens de configuratie.\n"
-"Test uw verbinding via net_monitor of mcc. Indien uw verbinding niet werkt, "
-"kunt u proberen de configuratie opnieuw op te starten."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WAARSCHUWING: Dit apparaat is al geconfigureerd om verbinding te maken met "
-"Internet.\n"
-"Accepteer gewoon de instellingen om dit apparaat geconfigureerd te laten.\n"
-"Als u de onderstaande velden aanpast, wordt het apparaat opnieuw "
-"geconfigureerd"
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Gelieve de IP-configuratie voor deze machine in te geven.\n"
-"Elke ingang moet ingegeven worden als een IP adres in `dotted-decimal'-\n"
-"vorm (bijvoorbeeld 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Bezig met configureren van netwerk-apparaat %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adres"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmasker"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BootP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatisch IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Het IP-adres moet het formaat 1.2.3.4 hebben"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Gelieve uw hostnaam in te voeren.\n"
-"Het moet een volledige hostnaam zijn, zoals ``mybox.mylab.myco.com''.\n"
-"U mag ook het IP-adres van de gateway invoeren als u er een heeft."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (bijvoorbeeld %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway apparaat"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuratie van proxie(s)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Netwerkkaart id onthouden (nuttig voor laptops)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy moet http://... zijn"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy moet ftp://... zijn"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet configuratie"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wenst u nu te proberen een connectie te maken met Internet?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Bezig met testen van uw connectie..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "U bent op dit moment aangesloten op het Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Vanwege beveiligingsredenen zal het nu worden neergelegd."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Het lijkt erop dat dit systeem niet aangesloten is met\n"
-"het internet. Probeer uw connectie te herconfigureren."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Connectie configuratie"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Selecteer of vul onderstaand veld a.u.b. in"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ van de kaart"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Mem (DMA) van de kaart"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO van de kaart"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 van de kaart"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 van de kaart"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Uw persoonlijke telefoonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Naam van uw provider (bijv. provider.nl)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefoonnummer van uw provider"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 van uw provider (optioneel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 van uw provider (optioneel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Kies uw land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Inbel mode"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Verbindingssnelheid"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Maximale wachttijd voor verbinding (in seconden)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Account Login (gebruikers-naam)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Wachtwoord"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "koppelen mislukt: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended partitie niet ondersteund op dit platform"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Er zit een gat in uw partitietabel, maar ik kan het niet gebruiken.\n"
-"De enige oplossing is om uw primaire partitie te verplaatsen zodat het gat "
-"naast de extended partitie komt te liggen"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Het herstellen van bestand %s is niet gelukt: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Slechte reservekopie"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout bij het schrijven naar bestand %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Er is iets verdachts aan de gang op uw schijf. \n"
-"Een test om de integriteit van de gegevens de testen is mislukt.Dat betekent "
-"dat wanneer er iets naar schijf wordt geschreven,\n"
-"het uiteindelijk onleesbare troep wordt."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "must-have"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "belangrijk"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "heel leuk"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "leuk"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "misschien"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokale printer"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Netwerk printer"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer aan CUPS server op afstand"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer aan lpd server op afstand"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkprinter (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer aan SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer aan NetWare server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Voer een apparaat-URI voor de printer in"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Job doorsluizen naar een commando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Onbekend model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale printers"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Printers op afstand"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr "op parallelle poort  \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB printer \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multi-functioneel apparaat op parallelle poort \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multi-functioneel apparaat op USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ". multi-functioneel apparaat op HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multi-functioneel apparaat"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", bezig met printen naar %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "op LPD server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", poort %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "op Windows server \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "op Novell server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", met gebruik van opdracht %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raw printer (geen stuurprogramma)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(aan %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(aan deze machine)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Op CUPS-server \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Standaard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selecteer Printer-verbinding"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hoe is de printer verbonden?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Printers aan een CUPS-server op afstand hoeft u hier niet te configureren; "
-"deze printers zullen automatisch bespeurd worden."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS configuratie"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "CUPS server specificeren"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Om toegang te krijgen tot CUPS-servers op afstand in uw lokale netwerk hoeft "
-"u hier niets te configureren; CUPS-servers informeren uw machine automatisch "
-"over hun printers. Alle printers die op dit moment bekend zijn bij uw "
-"computer zijn vermeld in het \"Printers op afstand\"-veld in het "
-"hoofdvenster van Printerdrake. Als uw CUPS-server zich niet bevindt in uw "
-"lokale netwerk, dan geeft u het IP-adres van de CUPS-server in en optioneel "
-"het poortnummer om de printerinformatie van de server op te vragen. In "
-"andere gevallen laat u deze velden leeg."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normaal gesproken wordt CUPS automatisch geconfigureerd aan de hand van uw "
-"netwerkomgeving, zodat u toegang heeft tot de printers op de CUPS-servers in "
-"uw lokale netwerk. In het geval dat dit niet goed werkt, zet dan "
-"\"Automatische CUPS configuratie\" uit en bewerk uw /etc/cups/cupsd.conf "
-"bestand handmatig. Vergeet u niet daarna CUPS te herstarten (opdracht: "
-"\"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Het IP-adres zou er uit moeten zien als 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Het poortnummer moet een geheel getal zijn!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-server IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Poort"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatische CUPS-configuratie"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Bezig met het zoeken van apparaten..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Poorten testen"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Printer toevoegen"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Welkom bij de Printer Instellingen Wizard\n"
-"\n"
-"Deze wizard laat u lokale- of afstand-printers installeren die vanaf deze of "
-"andere computers in het netwerk gebruikt gaan worden.\n"
-"\n"
-"Het zal u vragen naar alle benodigde informatie om de printer in te stellen "
-"en geeft u toegang tot alle beschikbare printer-stuurprogramma's, "
-"stuurprogramma-opties en printerverbindingtypes."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokale printer"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Welkom bij de Printer Instellingen Wizard\n"
-"\n"
-"Deze wizard helpt u bij het installren van uw printer(s) verbonden aan deze "
-"computer.\n"
-"\n"
-"Gelieve uw printer(s) in deze computer te pluggen en aan te zetten. Klik op "
-"\"Volgende\" wanneer u klaar bent, en op \"Annuleren\" wanneer u niet op dit "
-"moment uw printer(s) wilt instellen.\n"
-"\n"
-"Merk op dat sommige computers kunnen vastlopen gedurende de automatische "
-"bespeuring van de printer. Schakel \"Automatisch bespeuren van printer(s)\" "
-"uit om een printerinstallatie uit te voeren zonder automatische bespeuring. "
-"Gebruik de \"Expert-modus\" van Printerdrake indien u een printer-op-afstand "
-"wilt instellen die niet automatisch door Printerdrake getoond wordt."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatisch bespeuren van printers"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Gefeliciteerd, uw printer is nu geïnstalleerd en geconfigureerd!\n"
-"\n"
-"U kunt afdrukken met de \"Afdrukken\"-opdracht in uw toepassingen (normaal "
-"gesproken in het \"Bestand\"-menu).\n"
-"\n"
-"Indien u een printer wilt toevoegen, verwijderen of hernoemen, of indien u "
-"de standaard instellingen wilt wijzigen (papierinvoer-tray, "
-"afdrukkwaliteit, ...), selecteert u dan \"Printer\" in het \"Hardware\"-"
-"gedeelte van het Mandrake Controle Centrum."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatisch bespeuren van printers"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake is in staat om de parallelle- en USB-printers die aan uw "
-"computer verbonden zijn, automatisch te bespeuren. Let u echter op dat op "
-"sommige systemen de automatische bespeuring UW MACHINE KAN LATEN VASTLOPEN. "
-"DIT KAN LEIDEN TOT BESCHADIGING VAN BESTANDSSYSTEMEN! Dus doe dit OP EIGEN "
-"RISICO!\n"
-"\n"
-"Weet u zeker dat u uw printers automatisch wilt laten bespeuren?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Bespeur automatisch"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Handmatig printer instellen"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s bespeurd"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer op parallelle poort \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB printer \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Geen lokale printer gevonden! Om met de hand een printer te installeren, "
-"voert u een apparaat- of bestandsnaam in op de invoerregel. (Parallelle "
-"poorten: /dev/lp0, /dev/lp1, ..., equivalent aan LPT1:,LPT2:, ..., 1ste USB "
-"printer: /dev/usb/lp0, 2de USB printer: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "U dient een apparaat  of bestandsnaam in te voeren!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Geen lokale printer gevonden!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Netwerkprinters kunnen alleen na de installatie worden ingesteld. Kies "
-"\"Hardware\" en daarna \"Printer\" in het Mandrake Controlecentrum."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Om netwerkprinters te installeren, klikt u op \"Annuleren\", schakel over "
-"naar \"Expert modus\" en klik opnieuw op \"Nieuwe printer toevoegen\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"De volgende printer is bespeurd. Is dit niet degene die u wilt configureren, "
-"geef dan een apparaatnaam/bestandsnaam op de invoerregel"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Dit is een lijst van alle automatisch bespeurde printers. Kiest u de printer "
-"om in te stellen of geef een apparaatnaam/bestandsnaam op de invoerregel"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"De volgende printer is automatisch bespeurd. De configuratie van de printer "
-"zal volledig automatisch gaan. Indien uw printer niet correct bespeurd wordt "
-"of indien u liever een aangepaste printerconfiguratie wilt, zet dan "
-"\"Handmatige configuratie\" aan."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Dit is een lijst van alle automatisch bespeurde printers. Kiest u de printer "
-"die u wenst in te stellen. De configuratie van de printer zal volledig "
-"automatisch gaan. Indien uw printer niet correct bespeurd wordt of indien u "
-"een aangepaste printerconfiguratie wenst, zet dan \"Handmatige configuratie"
-"\" aan."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Kiest u de poort waaraan uw printer is verbonden of geef een apparaatnaam/"
-"bestandsnaam op de invoerregel"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Kiest u de poort waaraan uw printer is verbonden."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallelle poorten: /dev/lp0, /dev/lp1, ..., equivalent aan LPT1:,"
-"LPT2:, ..., 1ste USB printer: /dev/usb/lp0, 2de USB printer: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "U dient een printer of apparaat te kiezen/in te voeren!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Handmatige configuratie"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Is uw printer een multi-functioneel apparaat van HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 met scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Bezig met installeren van HPOJ pakket..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Bezig met nagaan en configureren van apparaat HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Bezig met installeren van SANE pakket..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Scannen op uw HP multi-functioneel apparaat"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Bezig met beschikbaar maken van printerpoort voor CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Bezig met lezen van printer-database..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "lpd op afstand - Printer-opties"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Om een lpd-printer op afstand te gebruiken, dient u de hostnaam van de "
-"printerserver en de printernaam op die server in te voeren."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Naam van host op afstand:"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Naam van printer op afstand"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "De naam van de host op afstand is afwezig!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "De naam van de printer op afstand is afwezig!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Printer-opties"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Om naar een SMB-printer af te drukken, dient u de SMB hostnaam (deze kan "
-"verschillen van de TCP/IP hostnaam) in te geven en mogelijk het IP-adres van "
-"de printserver, alsook de naam van de gedeelde printer waar u toegang tot "
-"wenst en, indien nodig, informatie over gebruikersnaam, wachtwoord en "
-"werkgroep."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-server host"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-server IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Sharenaam"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Werkgroep"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ofwel de servernaam ofwel het IP van de server moet ingevoerd worden!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Naam van Samba-share is afwezig!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Printer-Opties"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Op naar een NetWare-printer af te drukken, dient u de NetWare Printer "
-"servernaam op te geven (deze kan verschillen van de TCP/IP hostnaam!) alsook "
-"de naam van de printerwachtrij waar u toegang tot wilt en, indien nodig, een "
-"gebruikersnaam en wachtwoord."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printer Server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Naam van de printerwachtrij"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-servernaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-wachtrijnaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket Printer opties"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Om naar een TCP- of socketprinter af te drukken, dient u de hostnaam van de "
-"printer en zonodig het poortnummer op te geven. Op HP JetDirect-servers is "
-"het poortnummer over het algemeen 9100, op andere servers kan het variëren. "
-"U zij verwezen naar het handboek van uw hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Printer hostnaam"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Printer hostnaam is afwezig!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printerapparaat URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"U kunt de URI om de printer aan te spreken direct opgeven. De URI moet\n"
-"voldoen aan ofwel de CUPS-, ofwel de Foomatic specificaties. Let op dat\n"
-"niet alle URI-typen door alle \"spoolers\" ondersteund worden."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Een geldige URI moet worden ingevoerd!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Elke printer heeft een naam nodig (bijvoorbeeld \"printer\"). De "
-"Beschrijving- en Locatie-velden behoeven niet te worden ingevuld. Dit zijn "
-"opmerkingen voor de gebruikers."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Naam van de printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beschrijving"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Locatie"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Bezig met voorbereiden van printer-database..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Uw printermodel"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake heeft de modelnaam die resulteerde uit de automatische "
-"bespeuring vergeleken met de modellen in de printer-database om de beste "
-"overeenkomst te vinden. Deze keuze kan onjuist zijn, in het bijzonder "
-"wanneer uw printer in het geheel niet in de database is opgenomen. Ga dus na "
-"of de keuze juist is en klik \"Het model is juist\" als dit het geval is en "
-"zoniet klikt u \"Handmatig model selecteren\" zodat u uw printermodel "
-"handmatig kunt kiezen op het volgende scherm.\n"
-"\n"
-"Voor uw printer heeft Printerdrake gevonden:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Het model is juist"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Handmatig model selecteren"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Selectie van printer-model"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Welk model printer heeft u?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Gaat u na of Printerdrake het automatisch bespeuren van uw model printer "
-"correct heeft uitgevoerd. Zoek het juiste model in de lijst indien de "
-"selectie staat op een onjuist model, of op \"Raw printer\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Indien uw printer niet getoond wordt, kies dan een compatibel model (zie uw "
-"printerhandleiding) of één die er op lijkt."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter-configuratie"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"U configureert nu een OKI laser winprinter. Deze printers\n"
-"gebruiken een erg speciaal communicatieprotocol en daarom werken ze alleen "
-"indien verbonden met de eerste parallelle poort. Als uw printer verbonden is "
-"aan een andere poort of aan een printserver, verbindt u dan de printer aan "
-"de eerste parallelle poort voordat u een testpagina afdrukt, anders zal de "
-"printer niet werken. De instelling van het verbindingstype wordt door het "
-"stuurprogramma genegeerd."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet-configuratie"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"De inkjet-printerstuurprogramma's die door Lexmark worden verstrekt "
-"ondersteunen alleen lokale printers, en geen printers-op-afstand of "
-"printservers. Gelieve uw printer aan een lokale poort te verbinden of hem te "
-"configureren op de machine waaraan hij is verbonden."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Om met uw Lexmark inkjet en deze configuratie te kunnen afdrukken, heeft u "
-"de inkjet-printerstuurprogramma's nodig die door Lexmark (http://www.lexmark."
-"nl/) ter beschikking gesteld worden. Ga naar deze webpagina en klik op de "
-"\"Drivers\"-knop. Kies vervolgens \"Printer drivers\", uw model en daarna "
-"\"Linux\" als besturingssysteem. De stuurprogramma's komen in de vorm van "
-"RPM-pakketten of shell-scripts met interactieve grafische installatie. Het "
-"is niet nodig om deze configuratie met de grafische schillen te doen. "
-"Annuleer direct na de licentie-overeenkomst. Druk dan printkop-"
-"uitlijningpagina's af met \"lexmarkmaintain\" en pas de "
-"kopuitlijningsinstellingen aan met dit programma."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Printer standaard-instellingen\n"
-"\n"
-"Zorgt u ervoor dat de paginagrootte en de inktsoort/afdrukmodus (indien "
-"beschikbaar), alsmede de hardware-configuratie van laserprinters (geheugen, "
-"duplex-eenheid, extra trays) juist ingesteld zijn. Let op dat een zeer hoge "
-"printkwaliteit het afdrukken behoorlijk kan vertragen."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Optie %s moet een geheel getal zijn!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Optie %s moet een getal zijn!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Optie %s valt buiten het bereik!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Wenst u deze printer (\"%s\")\n"
-"als standaard printer in te stellen?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Test-pagina's"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Selecteert u de test-pagina's die u af wenst te drukken.\n"
-"Let op: het kan een nogal lange tijd in beslag nemen voordat de foto-test-"
-"pagina is afgedrukt en op laserprinters met onvoldoende geheugen wordt deze "
-"wellicht helemaal niet afgedrukt. In de meeste gevallen is het voldoende om "
-"de standaard test-pagina af te drukken."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Geen test-pagina's"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Afdrukken"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standaard testpagina"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternatieve test-pagina (Letter-formaat)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternatieve test-pagina (A4-formaat)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto-testpagina"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Druk geen enkele testpagina af"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Bezig met afdrukken van testpagina(s)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testpagina('s) werd(en) naar de printer gestuurd.\n"
-"Het kan even duren voordat het eigenlijke afdrukken begint.\n"
-"Print-status:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testpagina's) werd(en) naar de printer gestuurd.\n"
-"Het kan even duren voordat het eigenlijke afdrukken begint.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Werkt het afdrukken naar behoren?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Kale ('raw') printer"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, "
-"gebruikt u ofwel het commando \"%s  <bestand>\", ofwel een grafisch "
-"printerhulpprogramma: \"xpp <bestand>\" of \"kprinter <bestand>\". Deze "
-"grafische hulpprogramma's stellen u in staat om de printer te kiezen en "
-"gemakkelijk de opties te wijzigen.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Deze commando's kunt u ook invullen in het \"Print-commando\"-veld van "
-"printdialogen van veel applicaties. Maar vul daar dan geen bestandsnaam in "
-"omdat het af te drukken bestand wordt geleverd door de applicatie.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"De \"%s\"-opdracht geeft ook de mogelijkheid tot het wijzigen van de opties "
-"voor een specifieke printtaak. Voeg de gewenste instellingen eenvoudigweg "
-"toe aan de commandoregel, bijvoorbeeld \"%s <bestand>\"."
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Om de beschikbare opties voor de huidige printer te weten te komen, kunt u "
-"ofwel de lijsthieronder lezen, ofwel klikken op de knop \"Lijst van print-"
-"opties\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Dit is een lijst van de beschikbare opties voor de huidige printer:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, \n"
-"gebruikt u het commando \"%s <bestand>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dit commando kunt u ook invullen in het \"Print-commando\"-veld van "
-"printdialogen van veel applicaties. Maar vul daar dan geen bestandsnaam in "
-"omdat het af te drukken bestand wordt geleverd door de applicatie. \n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Om een lijst te verkrijgen van alle beschikbare opties voor de huidige "
-"printer, klikt u op de knop \"Lijst van print-opties\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Om een bestand vanaf de commandoregel (terminalvenster) af te drukken, \n"
-"gebruikt u het commando \"%s <bestand>\" of \"%s <bestand>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Wanneer u KDE als bureau-omgeving gebruikt dan heeft u de beschikking over "
-"een \"paniek-knop\", een pictogram op het bureaublad, met daarop de tekst "
-"\"STOP Printer!\", welke onmiddelijk alle printtaken stopt wanneer u er op "
-"klikt. Dit is handig bijvoorbeeld in het geval van papierstoringen.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"De \"%s\"- en \"%s\"-opdrachten geven ook de mogelijkheid tot het wijzigen "
-"van de opties voor een specifieke printtaak. Voeg de gewenste instellingen "
-"eenvoudigweg toe aan de commandoregel, bijvoorbeeld \"%s <bestand>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Sluiten"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Bezig met afdrukken/scannen op \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Bezig met afdrukken op printer \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lijst van print-opties"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Uw HP multifunctioneel apparaat is automatisch geconfigureerd om te kunnen "
-"scannen. U kunt nu scannen met \"scanimage\" (\"scanimage -d hp:%s\" om de "
-"scanner te specificeren als u er meer dan één heeft) vanaf de commandoregel "
-"of met behulp van de grafische interfaces \"xscanimage\" of \"xsane\". "
-"Indien u gebruik maakt van The GIMP, kunt u ook scannen door het juiste punt "
-"te kiezen in het \"Bestand\"/\"Importeren\"-menu. U kunt ook \"man scanimage"
-"\" en \"man sane-hp\" aanroepen vanaf de commandoregel om meer informatie te "
-"krijgen.\n"
-"\n"
-"Gebruik voor dit apparaat geen \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Uw HP multifunctioneel apparaat is automatisch geconfigureerd om te kunnen "
-"scannen. U kunt nu scannen vanaf de commandoregel met \"ptal-hp %s scan ..."
-"\". Scannen via een grafische interface of vanuit The GIMP is nog niet "
-"ondersteund voor uw apparaat. U vindt meer informatie in het bestand \"/usr/"
-"share/doc/hpoj-0.8/ptal-hp-scan.html\" op uw systeem. Als u een HP LaserJet "
-"1100 of 1200 heeft kunt u alleen scannen indien u de scanner-optie "
-"geïnstalleerd heeft.\n"
-"\n"
-"Gebruik voor dit apparaat geen \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Bezig met lezen van printer-informatie..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Printer-configuratie overzetten"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"U kunt de printerconfiguratie die u voor spooler %s uitgevoerd heeft, "
-"kopiëren naar %s, uw huidige spooler. Alle configuratiegegevens "
-"(printernaam, beschrijving, locatie, verbindingssoort, en standaard opties) "
-"worden dan overgenomen, maar printtaken zullen niet worden overgezet.\n"
-"Niet alle wachtrijen kunnen worden overgezet, vanwege de volgende redenen:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ondersteunt geen printers op Novell-servers of printers die gegevens in "
-"een vrije vorm-opdracht versturen.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ondersteunt alleen printers aan deze computer, LPD printers op afstand, "
-"en Socket/TCP printers.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteunen geen IPP printers.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Daarbij komt dat wachtrijen die niet met dit programma of met \"foomatic-"
-"configure\" zijn aangemaakt, niet kunnen worden overgezet."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ook printers geconfigureerd met door hun fabrikant geleverde PPD-bestanden, "
-"of met eigen CUPS drivers, kunnen niet worden overgezet."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markeer de printers die u wilt overzetten en klik \n"
-"\"Overzetten\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "De printers niet overzetten"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Overzetten"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Een printer met de naam \"%s\" bestaat al onder %s. \n"
-"Klik op \"Overzetten\" om deze te overschrijven.\n"
-"U kunt ook een nieuwe naam ingeven of deze printer overslaan."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Een printernaam mag alleen letters, getallen en een laag liggend streepje "
-"bevatten"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"De printer \"%s\" bestaat reeds, \n"
-"weet u zeker dat u de configuratie ervan wilt overschrijven?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nieuwe printernaam"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Bezig met overzetten van %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"U heeft uw vorige standaardprinter (\"%s\") overgezet. Moet dit ook de "
-"standaardprinter worden in het nieuwe printsysteem %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Bezig met verversen van printergegevens..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Printer-op-afstand configureren"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Bezig met inschakelen van het netwerk..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configureer het netwerk nu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Netwerk-functionaliteit niet geconfigureerd"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"U staat op het punt een printer-op-afstand te configureren. Hiervoor is een "
-"werkende netwerktoegang vereist, maar uw netwerk is nog niet geconfigureerd. "
-"Als u verder wilt gaan zonder netwerkconfiguratie, zult u niet in staat zijn "
-"om de printer te gebruiken die u nu configureert. Hoe wenst u verder te gaan?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Doorgaan zonder configureren van netwerk"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"De netwerk-configuratie die uitgevoerd is tijdens de installatie kan op dit "
-"moment niet worden ingeschakeld. Gaat u na of het netwerk toegankelijk is na "
-"het opnieuwopstarten van uw systeem. De configuratie is te corrigeren met "
-"het Mandrake Controle Centrum, onderdeel \"Netwerk & Internet\"/\"Verbinding"
-"\". Daarna kunt u de \n"
-"printer instellen, ook met het Mandrake Control Center, onderdeel \"Hardware"
-"\"/\"Printer\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"De netwerktoegang was nog niet actief en kon ook niet worden ingeschakeld. "
-"Gelieve uw configuratie en uw hardware na te kijken. Probeert u daarna "
-"opnieuw uw printer-op-afstand te configureren."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Bezig met herstarten van het printsysteem..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "hoog"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoïde"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-"Bezig met installeren van een printsysteem in het %s beveiligingsniveau"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"U staat op het punt om printsysteem %s te installeren op een systeem dat op "
-"beveiligingsniveau %s draait.\n"
-"\n"
-"Dit printsysteem draait een daemon (achtergrondproces) welke wacht op een "
-"taak en deze afhandelt. Deze daemon is ook toegankelijk voor computers op "
-"afstand over het netwerk en dus is het een mogelijk doelwit voor aanvallen. "
-"Daarom worden er normaal gesproken slechts enkele geselecteerde daemons "
-"gestart op dit beveiligingsniveau.\n"
-"\n"
-"Weet u zeker dat u het afdrukken wilt configureren op deze computer?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Het printsysteem zal bij het opstarten worden ingeschakeld"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Het printsysteem (%s) zal niet automatisch worden ingeschakeld wanneer de "
-"computer wordt opgestart.\n"
-"\n"
-"Mogelijkerwijs is het automatisch inschakelen uitgezet door het omschakelen "
-"naar een hoger beveiligingsniveau, omdat het printsysteem een mogelijk "
-"doelwit is voor aanvallen.\n"
-"\n"
-"Wilt u dat het automatisch inschakelen van het printsysteem weer wordt "
-"aangezet?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Bezig met nagaan welke software geïnstalleerd is..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Bezig met verwijderen van LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Bezig met verwijderen van LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Selecteer printer-spooler"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welk printsysteem (\"spooler\")  wilt u gebruiken?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Bezig met configureren van printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Bezig met installeren van Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printer-opties"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Bezig met het voorbereiden van PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Bezig met configureren van toepassingen ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Wenst u een printer in te stellen?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Printsysteem:"
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"De volgende printers zijn geconfigureerd. Dubbelklik op een printer om zijn "
-"instellingen te wijzigen; om hem als standaardprinter in te stellen; om "
-"informatie erover te bekijken; of om een printer op een CUPS-server op "
-"afstand ter beschikking te stellen in Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"De volgende printers zijn geconfigureerd. Dubbelklik op één ervan om zijn "
-"instellingen te wijzigen; hem als standaardprinter in te stellen; of om "
-"informatie erover te bekijken."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Printerlijst verversen (om alle CUPS printers-op-afstand zichtbaar te maken)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Wijzig het printsysteem"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normale modus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Wenst u een andere printer te configureren?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Printerconfiguratie aanpassen"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Wat wilt u aanpassen aan deze printer?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Doe het!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Soort printerverbinding"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Printernaam, beschrijving, locatie"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerfabrikant, model, aansturingsprogramma"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Printerfabrikant, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Stel deze printer in als standaardprinter"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Deze printer aan Star Office/OpenOffice.org toevoegen"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Deze printer verwijderen uit Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Druk testpagina('s) af"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Weet hoe deze printer kan worden gebruikt"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Printer verwijderen"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Bezig met verwijderen van oude printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standaard printer"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "De \"%s\"-printer is nu ingesteld als de standaardprinter."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Bezig met toevoegen van printer aan Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"De printer \"%s\" is niet succesvol aan Star Office/OpenOffice.org "
-"toegevoegd."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Het toevoegen van de printer \"%s\" aan Star Office/OpenOffice.org is "
-"mislukt."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Bezig met verwijderen van printer uit Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"De printer \"%s\" is succesvol uit Star Office/OpenOffice.org verwijderd."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Het verwijderen van de printer \"%s\" uit Star Office/OpenOffice.org is "
-"mislukt."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Weet u zeker dat u de printer \"%s\" wilt verwijderen?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Bezig met verwijderen van printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuratie van proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Welkom bij de proxy-configuratie.\n"
-"\n"
-"Hier kunt u uw http en ftp proxy's opgeven, al dan niet\n"
-"met loginnaam en wachtwoord\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Gelieve de http proxy-informatie in te vullen.\n"
-"Laat het leeg in het geval u geen http proxy wenst."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "poort"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Proxy moet beginnen met http:"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Het poort-gedeelte moet numeriek zijn"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Gelieve de ftp-proxy informatie\n"
-"in te vullen. Laat het leeg als u geen ftp proxy wenst"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL moet beginnen met ftp:"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Voer alstublieft de proxy loginnaam en wachtwoord\n"
-"in, als deze er zijn. In andere gevallen laat u dit leeg."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "loginnaam"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "wachtwoord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Voer wachtwoord opnieuw in"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "De wachtwoorden kloppen niet met elkaar. Probeert u het opnieuw!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan geen partitie toevoegen aan een _geformatteerde_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan niet schrijven naar bestand %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid-fout!"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid-fout! (misschien ontbreken de raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Niet genoeg partities voor RAID-niveau %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start het ALSA (Advanced Linux Sound Architecture) geluidssysteem"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, een periodieke commando-planner."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd is gebruikt voor het controleren van de batterijstatus en om dit te "
-"loggen via syslog.\n"
-"Het kan ook gebruikt worden om de machine uit te schakelen als het "
-"spanningsniveau van de batterij laag is."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Start commando's die door het at commando gepland zijn op het moment dat\n"
-"werd opgegeven als at werd gestart, en draait batch-commando's wanneer het "
-"load-average laag genoeg is."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is een standaard UNIX-programma dat door de gebruiker gespecificeerde "
-"programma's start\n"
-"op periodiek geplande tijden. vixie cron voegt een aantal 'features' toe "
-"aande basis UNIX-cron,\n"
-"waaronder betere veiligheid en krachtigere configuratieopties."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM voegt muisondersteuning toe aan text-based Linux-toepassingen zoals de\n"
-"Midnight Commander. Het laat ook mouse-based console knippen-en-plakken "
-"toe,\n"
-"en biedt ook ondersteuning voor pop-up menu's op de console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake draait als een hardware-sonde, en eventueel \n"
-"configureert het nieuwe of veranderde hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is een World Wide Web-server. Het wordt gebruikt om HTML-bestanden en "
-"CGI aan te bieden."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"De internet superserver daemon (meestal inetd genoemd) start een hele\n"
-"hoop andere internetdiensten wanneer nodig. Het is verantwoordelijk voor\n"
-"vele diensten, waaronder telnet, ftp, rsh en rlogin. Als u inetd "
-"uitschakelt,\n"
-"schakelt u alle diensten uit waar de daemon verantwoordelijk voor is."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pakket-filtering inschakelen voor Linux kernel 2.2-serie, om \n"
-"een firewall op te zetten die uw machine beschermt tegen \n"
-"aanvallen vanuit het netwerk."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dit pakket laadt de geselecteerde toetsenbord-layout als ingesteld in\n"
-"/etc/sysconfig/keyboard. Dit kan geselecteerd worden via de kbdconfig "
-"utility.\n"
-"U laat dit best aanstaan voor de meeste machines."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisch opnieuw aanmaken van kernel header in \n"
-"/boot voor /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatisch vinden en configureren van hardware bij het opstarten"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf zal op sommige momenten regelen dat diverse \n"
-"taken worden uitgevoerd bij het opstarten, om de systeem-\n"
-"configuratie te behouden."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd is de print-daemon, die nodig is om lpr goed te laten werken. Het is\n"
-"voornamelijk een server die print-jobs naar printers stuurt en regelt."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, gebruikt om een hoge-prestatie en hoge-\n"
-"beschikbaarheid server te bouwen."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) is een Domain Name Server (DNS) die wordt gebruikt om hostnamen "
-"naar IP-adressen om te zetten."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"(Ont)koppelt alle Network File System (NFS), SMB (Lan Manager/Windows)\n"
-"en NCP (NetWare) koppelpunten."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activeert/Deactiveert alle netwerk-interfaces die geconfigureerd zijn\n"
-"om bij het opstarten ingeschakeld te worden."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS is een populair protocol voor bestandsdeling over TCP/IP-netwerken.\n"
-"Deze dienst geeft u NFS-serverfunctionaliteit, die dan wordt geregeld via "
-"het\n"
-"bestand /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS is een populair protocol voor bestandsdeling over TCP/IP-netwerken.\n"
-"Deze dienst geeft u NFS-bestands'locking'-functionaliteit."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatisch aanzetten van de numlock-toets onder \n"
-"commandovensters en XFree bij het opstarten."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun de OKI 4w en compatibele winprinters"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA-ondersteuning dient meestal om ethernet en modems in laptops te "
-"onder-\n"
-"steunen. Het zal niet gestart worden tenzij het geconfigureerd is, dus het "
-"is\n"
-"veilig om het geïnstalleerd te hebben op machines die het niet nodig hebben."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"De portmapper beheert RPC-verbindingen, die gebruikt worden door protocols\n"
-"zoals NFS en NIS. De portmap-server moet draaien op machines die fungeren\n"
-"als servers voor protocols die het RPC-mechanisme gebruiken."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix is een Mail Transport Agent, een programma dat post verplaatst van "
-"de ene machine naar de andere."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bewaart en herstelt de systeem-entropy pool voor betere generatie\n"
-"van willekeurige cijfers."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Wijs rauwe apparaten toe aan blok-georiënteerde apparaten \n"
-"(zoals partities op een harde schijf), voor het gebruik van \n"
-"applicaties zoals Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"De routed daemon laat automatische IP-router-tabel updates toe via het RIP-\n"
-"protocol. RIP is vooral gebruikt op kleine netwerken, complexere routing-\n"
-"protocols zijn nodig voor complexere netwerken."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Het rstat-protocol laat gebruikers op een netwerk de prestatie-cijfers\n"
-"voor elke machine op dat netwerk op te vragen."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Het rusers-protocol laat gebruikers op een netwerk toe om de kijken wie er\n"
-"ingelogd is op de andere machines op dat netwerk."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Het rwho-protocol laat gebruikers op afstand een lijst opvragen van alle\n"
-"gebruikers die op een machine ingelogd zijn die de rwho daemon draait.\n"
-"(vergelijkbaar met finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Schakel het geluidssysteem van uw machine in"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog is de manier die vele daemons gebruiken om boodschappen te loggen "
-"naar\n"
-"verscheidene systeem-logbestanden. Het is een goed idee syslog altijd te "
-"draaien."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Laad de stuurprogramma's voor uw USB-apparaten"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Start de X Font Server (deze is noodzakelijk voor het draaien\n"
-"van XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Selecteer welke diensten automatisch gestart moeten worden bij het opstarten"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Afdrukken"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Bestanden delen"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Systeem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Beheer op afstand"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Database-server"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Diensten: %d geactiveerd van %d geregistreerd"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Diensten"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "actief"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "gestopt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Diensten en daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Geen extra informatie over\n"
-"deze dienst beschikbaar, sorry."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Bij opstarten"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stoppen"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Bedankt dat u voor Mandrake Linux 8.2 gekozen hebt"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Welkom in de Open Source-wereld"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Het succes van MandrakeSoft is gebaseerd op het principe van Vrije Software. "
-"Uw nieuwe besturingssysteem is het resultaat van het gezamenlijke werk van "
-"de wereldwijde Linux-gemeenschap."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Doe mee met de wereld van Vrije Software"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Leer de Open Source-gemeenschap kennen en word er deelgenoot van. Leer, "
-"doceer en help anderen door u aan te sluiten bij de vele discussiefora die u "
-"vindt op onze \"Community\"-webpagina's"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet en Berichten"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 biedt de software om toegang te krijgen tot alles wat het "
-"Internet te bieden heeft: Surf over het web en bekijk animaties met Mozilla "
-"en Konqueror, wissel e-mail uit & beheer uw persoonlijke informatie met "
-"Evolution en Kmail, en veel meer"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia en Grafisch"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 laat u uw multimedia-computer tot aan zijn grenzen "
-"drijven! Gebruik de allernieuwste software om muziek- en audiobestanden af "
-"te spelen, uw plaatjes en foto's te bewerken en te beheren, TV en video's te "
-"kijken en veel meer"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 is het ultieme ontwikkelplatform. Ontdek de kracht van de "
-"GNU gcc compiler naast de beste Open Source ontwikkelomgevingen"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Controlecentrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Het Mandrake Linux 8.2 Controlecentrum is een alles-in-één-plek om uw "
-"Mandrake-systeem volledig aan te passen en te configureren"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Gebruiker-interfaces"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 biedt 11 verschillende grafische werkplek-omgevingen en "
-"window managers waaruit u kunt kiezen, waaronder GNOME 1.4, KDE 2.2.2, "
-"Window Maker 0.8 en de rest"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Server software"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Transformeer uw computer naar een krachtige server met slechts enkele "
-"muisklikken: Web server, e-mail, firewall, router, file- en printserver, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spelletjes"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 biedt het beste in Open Source games - arcade, actie, "
-"kaarten, sporten, strategie, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Wilt u Linux leren op een eenvoudige, snelle en gratis manier? MandrakeSoft "
-"biedt gratis Linux-training, naast een manier om uw voortgang te testen, op "
-"MandrakeCampus -- ons online trainingscentrum"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kwaliteits-ondersteuning vanuit de Linux-gemeenschap, en van MandrakeSoft, "
-"is om de hoek! En indien u al een Linux-veteraan bent, word een \"Expert\" "
-"en deel uw kennis op onze ondersteuningswebpagina"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Voor al uw IT-projecten staan onze consultants klaar om te analyseren wat u "
-"nodig heeft en een aangepaste oplossing te bieden. Profiteer van "
-"MandrakeSoft's enorme ervaring als Linux-producent voor een waar IT-"
-"alternatief voor uw bedrijfsorganisatie"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Ons volledige scala aan Linux-oplossingen, naast speciale aanbiedingen voor "
-"onze produkten en 'goodies', is beschikbaar op onze e-store"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Voor meer informatie over MandrakeSoft's Professional Services en "
-"commerciële produkten, zie de volgende webpagina:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Bezig met installeren van pakketten..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ik kan uw partitietabel niet lezen, ze is te corrupt voor mij :-(\n"
-"Ik zal proberen door te gaan en de slechte partities te verwijderen"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ik kan het benodigde beeld-bestand `%s' niet vinden."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configuratieprograma voor auto-installatie"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"U staat op het punt om een auto-installatie diskette te configureren. \n"
-"Deze functie is enigszins risicovol en moet met voorzorg gebruikt worden.\n"
-"\n"
-"Met die functie zult u in staat zijn de installatie die u heeft uitgevoerd "
-"op deze computer te herhalen. Daarbij worden u bij enkele stappen vragen "
-"gesteld, om de bijbehorende waarden aan te passen.\n"
-"\n"
-"Voor een maximale graad van veiligheid, zal het partitioneren en formatteren "
-"nooit automatisch uitgevoerd worden, ongeacht wat u gekozen heeft gedurende "
-"de installatie van deze computer.\n"
-"\n"
-"Wenst u door te gaan?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configuratie van automatische stappen"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Kiest u alstublieft voor elke stap of deze zich zal herhalen zoals bij uw "
-"installatie, of dat deze handmatig zal zijn"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Welkom.\n"
-"\n"
-"De parameters van de auto-installatie zijn aanwezig in de afdelingen aan de "
-"linkerkant"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gefeliciteerd!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"De diskette is met succes aangemaakt.\n"
-"U kunt nu uw installatie herhalen."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Auto-installatie"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Item toevoegen"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Het laatste item verwijderen"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Rapport \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon Rapport\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Rapport Details\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "totale voortgang"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Reservekopie maken van systeembestanden..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Harde schijf reservekopie..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Reservekopie gebruikersbestanden..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Voortgang reservekopie harde schijf..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Reservekopie andere bestanden..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"bestandslijst via FTP verzonden: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Er is een probleem opgetreden met de FTP-verbinding. Het is niet "
-"mogelijk om uw reservekopie-bestanden per FTP te verzenden.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Er is een fout opgetreden tijdens het versturen van e-mail.\n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Bestandsselectie"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Selecteer de bestanden of mappen en klik op 'Toevoegen'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Gelieve alle opties te selecteren die u nodig heeft.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Deze opties kunnen een reservekopie maken van alle bestanden in uw /etc "
-"map.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Reservekopie maken van uw systeembestanden ( /etc map )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-"Gebruik incrementele reservekopie (de oude reservekopieën niet vervangen)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Essentiële bestanden niet opnemen (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Met deze optie kunt u iedere versie van uw /etc herstellen."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Gelieve alle gebruikers te selecteren die u in uw reservekopie wilt opnemen."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Browser-cache niet opnemen"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Gebruik incrementele reservekopieën (vervang geen oude reservekopieën)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Verwijder geselecteerden"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32) "
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Gebruikers"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Gebruik FTP-verbinding voor reservekopie"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Gelieve hostnaam of IP in te voeren."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Gelieve de map op deze host \n"
-" om de reservekopie in op te slaan\n"
-" in te voeren."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Voer uw login in"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Voer uw wachtwoord in"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Onthoud dit wachtwoord"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP-verbinding"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Beveiligde verbinding"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Gebruik CD/DVD-ROM voor reservekopie"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Kies uw CD-ruimte"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Ga na of u CDRW-media gebruikt"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Gelieve na te gaan of u uw CDRW wilt wissen voor u verdergaat"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Ga na of u de installatie-opstartprocedure\n"
-" wilt opnemen op uw CD."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Voer het apparaatnaam van uw CD Writer in\n"
-" Voorbeeld: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Gebruik tape voor backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Voer de apparaatnaam in om voor de reservekopie te gebruiken"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Voer de maximumruimte in die\n"
-" Drakbackup mag gebruiken"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Voer de map voor opslaan in:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Gebruik quota voor reservekopie-bestanden"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Netwerk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Harde schijf / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ieder uur"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dagelijks"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "wekelijks"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "maandelijks"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Gebruik daemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Gelieve het tijdsinterval \n"
-"tussen iedere backup te kiezen"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Kies de media\n"
-"voor de reservekopie."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Harde schijf met daemon gebruiken"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTP met daemon gebruiken"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Let u op dat de cron daemon aanstaat in uw 'diensten'."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Verstuur e-mailrapport na elke reservekopie naar:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Wat"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Waar"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Wanneer"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Meer opties"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup configuratie"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Bepaal waar u de reservekopie wilt maken"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "op harde schijf"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "over netwerk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Kies waar u een reservekopie van wilt maken"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Reservekopie-systeem"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Reservekopie Gebruikers"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Handmatig gebruiker selecteren"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Reservekopie-bronnen: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systeembestanden:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Gebruikersbestanden:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Overige bestanden:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Pad voor opslaan op harde schijf: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Host voor opslaan via FTP: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t gebruikersnaam: %s\n"
-"\t\t op pad: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opties:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tSysteembestanden niet opnemen\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tReservekopieën gebruiken tar en bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tReservekopieën gebruiken tar en gzip\n"
-
-# check if this is the right translation, unclear! -Reinout
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) opnemen: \n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-harde schijf.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netwerk over FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Netwerk over SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Geen configuratie, gelieve Wizard of Geavanceerd aan te klikken.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lijst van te herstellen gegevens:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lijst van gecorrumpeerde gegevens:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Gelieve het de volgende keer te deselecteren of te verwijderen"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Reservekopiebestanden zijn gecorrumpeerd"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Al uw geselecteerde gegevens zijn"
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Succesvol hersteld op %s"
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Configuratie herstellen"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK om de overige bestanden te herstellen"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Te herstellen gebruikerslijst (alleen de meest recente datum per gebruiker "
-"is van belang)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Reservekopie maken van systeembestanden voor:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Gelieve de datum te kiezen om te herstellen"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Gebruik harde schijf voor reservekopie"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Herstellen van harde schijf"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Voer de map in waar reservekopieën opgeslagen worden"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Selecteer andere media om vanaf te herstellen"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Andere media"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Systeem herstellen"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Gebruikers herstellen"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Overige herstellen"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "selecteer te herstellen pad (in plaats van / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Voer nieuwe backup uit alvorens te herstellen (alleen voor incrementele "
-"reservekopieën)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Verwijder gebruikersmappen alvorens te herstellen"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Alle reservekopieën herstellen"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Aangepast herstellen"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Help"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Vorige"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Opslaan"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Reservekopie maken"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Reservekopie herstellen"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Volgende"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Gelieve eerst een reservekopie te maken voordat u probeert te herstellen...\n"
-" of ga na dat uw pad voor opslaan correct is."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Er trad een fout op tijdens \"sendmail\"\n"
-"  Uw melding is niet verstuurd.\n"
-"  Gelieve sendmail te configureren."
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lijst van te installeren pakketten"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Er trad een fout op tijdens het versturen via FTP.\n"
-" Gelieve uw FTP-configuratie te corrigeren."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Selecteer de gegevens om te herstellen"
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Selecteer media voor de reservekopie"
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Selecteer de gegevens waarvan u een reservekopie wilt maken..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Kan geen configuratiebestand vinden \n"
-"klikt u op Wizard of Geavanceerd."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "In ontwikkeling ... nog even wachten."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Reservekopie maken van systeembestanden"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Reservekopie maken van gebruikersbestanden"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Reservekopie maken van overige bestanden"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Totale voortgang"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "bestanden worden per FTP verstuurd"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Bezig met versturen van bestanden..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lijst van gegevens om op te nemen op CD-ROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Voer de snelheid van de CD-Writer in"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Gelieve uw CD Writer apparaatnaam in te voeren (Voorbeeld: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ga na of u de installatie-opstartprocedure wilt opnemen op uw CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Nu reservekopie maken vanaf configuratiebestand"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Backup-configuratie bekijken"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configuratie met wizard"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Geavanceerde configuratie"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Nu reservekopie maken"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Sommige fouten die tijdens sendmail optreden worden\n"
-" veroorzaakt door een verkeerde configuratie van postfix.\n"
-" Om dit op te lossen dient u 'myhostname' of 'mydomain'\n"
-" in te stellen in /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Omschrijving:\n"
-"\n"
-"  Drakbackup dient om een reservekopie te maken van uw systeem.\n"
-"  Gedurende de configuratie kunt u selecteren:\n"
-"\t- Systeembestanden,\n"
-"\t- Gebruikersbestanden,\n"
-"\t- Overige bestanden.\n"
-"\tof uw gehele systeem ... en Overigen (zoals Windows-partities)\n"
-"\n"
-"  Drakbackup laat u een reservekopie maken van uw systeem op:\n"
-"\t- Harde schijf.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (met automatisch opstarten, redding en auto-"
-"installatie).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup laat u uw systeem herstellen naar een\n"
-"  door de gebruiker te bepalen map.\n"
-"\n"
-"  Standaard zullen alle reservekopieën opgeslagen worden in uw\n"
-"  /var/lib/drakbackup map.\n"
-"\n"
-"  Configuratiebestand:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Herstellen-stap:\n"
-"  \n"
-"  Tijdens de herstellen-stap, zal Drakbackup uw\n"
-"  oorspronkelijke map verwijderen en nagaan dat geen\n"
-"  van uw reservekopie-bestanden corrupt is. Het is\n"
-"  aanbevelenswaardig om een laatste reservekopie te\n"
-"  maken alvorens te herstellen.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"beschrijving van opties:\n"
-"\n"
-"Weest u voorzichtig met het gebruik van FTP-reservekopie,\n"
-"omdat alleen reeds gemaakte reservekopieën naar de server\n"
-"worden verzonden. Dus op dit moment dient u de reservekopie\n"
-"op uw harde schijf te maken alvorens deze te verzenden naar\n"
-"de server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemen bij Reservekopie herstellen:\n"
-"\n"
-"Tijdens de herstellen-stap zal Drakbackup al uw\n"
-"reservekopiebestanden controleren alvorens ze\n"
-"te herstellen. \n"
-"Voordat het herstellen begint zal Drakbackup uw\n"
-"oorspronkelijke map verwijderen. Alle gegevens erin\n"
-"zullen verloren gaan. Het is belangrijk om voorzichtigheid\n"
-"te betrachten en de reservekopiebestanden niet\n"
-"handmatig te wijzigen.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Omschrijving:\n"
-"\n"
-"  Drakbackup dient om een reservekopie te maken van uw systeem.\n"
-"  Gedurende de configuratie kunt u selecteren:\n"
-"\t- Systeembestanden,\n"
-"\t- Gebruikersbestanden,\n"
-"\t- Overige bestanden.\n"
-"\tof uw gehele systeem ... en Overigen (zoals Windows-partities)\n"
-"\n"
-"  Drakbackup laat u een reservekopie maken van uw systeem op:\n"
-"\t- Harde schijf.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (met automatisch opstarten, redding en auto-"
-"installatie).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup laat u uw systeem herstellen naar een\n"
-"  door de gebruiker te bepalen map.\n"
-"\n"
-"  Standaard zullen alle reservekopieën opgeslagen worden in uw\n"
-"  /var/lib/drakbackup map.\n"
-"\n"
-"  Configuratiebestand:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Herstellen-stap:\n"
-"  \n"
-"  Tijdens de herstellen-stap, zal Drakbackup uw\n"
-"  oorspronkelijke map verwijderen en nagaan dat geen\n"
-"  van uw reservekopie-bestanden corrupt is. Het is\n"
-"  aanbevelenswaardig om een laatste reservekopie te\n"
-"  maken alvorens te herstellen.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "De installatie van %s is niet gelukt. De volgende fout werd gevonden:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Zoek in geïnstalleerde lettertypen"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Geïnstalleerde lettertypen deselecteren"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "alle lettertypen ontleden"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "geen lettertypen gevonden."
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "klaar"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "kan geen lettertypen vinden in uw aangekoppelde partities"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Correcte lettertypen opnieuw selecteren"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "kan geen enkel lettertpype vinden.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Zoek lettertypen in lijst 'geïnstalleerd'"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopiëren van lettertypen"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installatie van True Type lettertypen"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Even geduld terwijl 'ttmkfdir' wordt uitgevoerd..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type installatie klaar"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Lettertypen-conversie"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "'type1inst' is bezig"
-
-# right translation? What is meant here?
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript verwijzingen"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf-lettertype conversie"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm-lettertype conversie"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Tijdelijke bestanden onderdrukken"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "XFS herstarten"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Lettertype-bestanden onderdrukken"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs herstarten"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Ga na dat u het recht heeft om lettertypen te installeren op uw systeem en "
-"ze te gebruiken, \n"
-"alvorens lettertypen te installeren.\n"
-"-U kunt de lettertypen op de gebruikelijke manier installeren. In zeldzame "
-"gevallen kunnen\n"
-"nep-lettertypen uw X Server laten hangen."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Import van lettertypen"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Neem Windows-lettertypen"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Lettertypen deïnstalleren"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Geavanceerde opties"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lettertypenlijst"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Kies de applicaties waarin de lettertypen beschikbaar zullen zijn:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generieke printers"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Selecteer het lettertypebestand of map en klik op 'Toevoegen'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installatielijst"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "klik hier als u er zeker van bent."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "hier zoniet."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Alle gedeselecteerd"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Alles geselecteerd"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Lijst verwijderen"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Initialen-tests"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Lettertypen op uw systeem kopiëren"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Lettertypen installeren & converteren"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-installatie"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Lettertypen op uw systeem verwijderen"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-deïnstallatie"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetverbinding delen"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetverbinding delen staat op dit moment aan"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"De setup van Internet Connectie Delen is al uitgevoerd.\n"
-"Het staat op dit moment aan.\n"
-"\n"
-"Wat wenst u te doen?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "uitschakelen"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "klaar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "herconfigureren"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Bezig met servers uitzetten..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetverbinding delen staat op dit moment uit."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet Connectie Delen staat niet aan"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Het instellen van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment uit.\n"
-"\n"
-"Wat wenst u te doen?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "inschakelen"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Bezig met inschakelen van servers..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetverbinding delen staat op dit moment aan"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"U staat op het punt om uw computer te configureren om zijn Internet-\n"
-"verbinding te delen. Met deze functie zullen andere computers op uw\n"
-"netwerk in staat zijn de internetverbinding van deze computer tegebruiken.\n"
-"\n"
-"Opmerking: u heeft een specifiek hiervoor bestemde netwerk-adapter nodig\n"
-"om een Local Area Network (LAN) op te zetten."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (gebruikt module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Geen netwerk adapter op uw systeem!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Er is geen ethernet netwerkadapter op uw systeem gevonden. Gelieve het "
-"hardware configuratieprogramma te draaien."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netwerk Interface"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Er is maar één geconfigureerde netwerkadapter op uw systeem:\n"
-"\n"
-"%s \n"
-"\n"
-"Ik sta op het punt om uw Local Area Network te koppelen aan\n"
-"deze adapter."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Kies alstublieft welke netwerkadapter verbinding zal maken met uw Local Area "
-"Network."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Netwerk-interface reeds geconfigureerd"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Waarschuwing, de netwerk-adapter (%s) is reeds geconfigureerd.\n"
-"\n"
-"Wilt u een automatische herconfiguratie?\n"
-"\n"
-"U kunt het ook handmatig doen, maar u moet dan wel weten wat u doet."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatisch opnieuw configureren"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Toon huidige interface-configuratie"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Huidige configuratie van '%s':\n"
-"\n"
-"Netwerk: %s\n"
-"IP adres: %s\n"
-"IP attribution: %s\n"
-"Stuurprogramma: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Het is mogelijk uw huidige configuratie te behouden en aan te nemen dat u "
-"reeds een DHCP-server heeft ingesteld; controleert u in dat geval of het "
-"klasse-C netwerk dat u gebruikt voor uw lokale netwerk correct is ingelezen; "
-"het wordt niet geherconfigureerd en uw DHCP-serverconfiguratie wordt niet "
-"aangeraakt.\n"
-"\n"
-"In andere gevallen kan het installatieprogramma uw interface herconfigureren "
-"en een DHCP-server voor u instellen.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-Class lokaal netwerk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Deze) DHCP-server IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Interface en DHCP-server opnieuw configureren"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Het lokale netwerk eindigde niet op '.0', procedure gestaakt"
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potentieel LAN-adresconflict gevonden in de huidige configuratie \n"
-"van %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Firewall configuratie gedetecteerd!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Waarschuwing! Een bestaande firewall configuratie is gevonden. U kunt "
-"misschien na de installatie een handmatige aanpassing nodig hebben."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configureren..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Bezig met het configureren van scripts, installeren van software, starten "
-"vanservers..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemen met installeren van pakket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alles is geconfigureerd. \n"
-"U kunt nu uw internetverbinding delen met andere gebruikers op uw Local Area "
-"Network, met gebruikmaking van automatische netwerkconfiguratie (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"De setup van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment uit."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"De setup van Internetverbinding delen is al uitgevoerd.\n"
-"Het staat op dit moment aan."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetverbinding delen is tot op heden nooit geconfigureerd."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuratie van Internetverbinding delen"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Welkom bij Internetverbinding delen! \n"
-"\n"
-"%s\n"
-"\n"
-"Klik op Configureer om de instellingen-wizard in te schakelen."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerk-configuratie (%d adapters)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiel: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Wis profiel..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Te verwijderen profiel:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nieuw profiel..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naam van het te creëren profiel (het nieuwe profiel wordt als een kopie van "
-"het huidige aangemaakt) : "
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostnaam:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet-toegang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Soort:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Even geduld"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configureren van Internet-toegang..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN configuratie"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Stuurprogramma"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configureer Local Area Network..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klik hier om de 'wizard' in te schakelen ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Wizard..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Toepassen"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Even geduld... bezig met toepassen van de configuratie"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Verbonden"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Niet verbonden"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Verbinding maken..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Verbinding neerleggen..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Waarschuwing: een andere internetverbinding is bespeurd, misschien gebruikt "
-"deze uw netwerk."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"U heeft helemaal geen geconfigureerde interface.\n"
-"Configureer deze eerst door op 'Configureer' te klikken"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Configuratie"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Opstart-protocol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Aangezet bij het opstarten"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP client"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "nu activeren"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "nu de-activeren"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Deze interface is nog niet geconfigureerd.\n"
-"Start de configuratie-wizard in het hoofdscherm."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"U heeft helemaal geen internetverbinding.\n"
-"Creëer er eerst één door op 'Configureer' te klikken"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetverbinding configureren"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetverbinding configureren"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Soort verbinding: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet-kaart"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Selecteer een veiligheids-niveau"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Controle-Centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Selecteer het programma dat u wenst te gebruiken"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "VS (ether)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "VS (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "VS (kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (ether)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (ether)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Oost-Europa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Ierland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "West-Europa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australië"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nieuw-Zeeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Zuid-Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentinië"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Gelieve uw\n"
-"TV-norm en land in te geven"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norm :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Gebied :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Zoeken naar TV-kanalen is bezig..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Zoeken naar TV-kanalen"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "gebruik: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is uw toetsenbord-layout?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wenst u dat de BackSpace toets Delete geeft in het terminalvenster?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Verander Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Stop a.u.b. de Installatie CD-ROM in uw drive en druk daarna op OK.\n"
-"Als u deze niet heeft, drukt u op Annuleren om \"live upgrade\" te vermijden."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Niet in staat \"live upgrade\" te starten!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"De wijziging is gemaakt, maar u moet uitloggen voordat het effect heeft"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Toon alleen voor de geselecteerde dag"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Bestand/_Nieuw"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Bestand/_Openen"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Bestand/O_pslaan"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Bestand/Ops_laan als..."
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Bestand/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opties"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opties/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Help"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Help/_Info..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Gebruiker"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Meldingen"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Uitleg van Mandrake Gereedschappen"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "zoeken"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Een hulpprogramma om uw logs bij te houden"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Instellingen"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "komt overeen met"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "maar komt niet overeen met"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Kies een bestand"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Inhoud van het bestand"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "waarschuwing via e-mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Even geduld, bezig met ontleden van bestand: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configuratie van waarschuwing per e-mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom bij het e-mail/SMS configuratieprogramma.\n"
-"\n"
-"Hier kunt u het waarschuwingssysteem instellen.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "instelling diensten"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"U zult een waarschuwing ontvangen indien één van de geselecteerde diensten "
-"niet meer draait"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "instelling processorbelasting"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"U zult een waarschuwing ontvangen indien de processorbelasting hoger is dan "
-"deze waarde"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configuratie van waarschuwing"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configureer de manier waarop het systeem u waarschuwt"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Opslaan als..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Welk type muis heeft u?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Geen seriële USB gevonden\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Derde knop emuleren?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s gevonden op %s, deze configureren?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Selecteer een scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Deze %s-scanner is niet ondersteund"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot-apparaat"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Deze %s-scanner moet geconfigureerd worden met printerdrake.\n"
-"U kunt printerdrake opstarten vanuit het Mandrake Controlecentrum in de "
-"Hardware-afdeling."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewall configuratie"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewall configuratie"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"U heeft reeds een firewall ingesteld.\n"
-"Klik op Configureer om de firewall te wijzigen\n"
-"of te verwijderen."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Klik op Configureer om een standaard-firewall in te stellen."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kies uw taal"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Installatieklasse selecteren"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Harde schijf-detectie"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Muis configureren"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Toetsenbord kiezen"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Veiligheid"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Bestandssystemen instellen"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partities formatteren"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Te installeren pakketten kiezen"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Systeem installeren"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Gebruiker toevoegen"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Netwerk-configuratie"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Diensten configureren"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Opstart-lader installeren"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Boot-diskette aanmaken"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X Configureren"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installeer systeemupdates"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Installatie afsluiten"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuratie van tinyfirewall\n"
-"\n"
-"Dit programma configureert een persoonlijk instelling van de firewall\n"
-"voor deze Mandrake Linux machine. Voor een krachtige, specifieke\n"
-"firewall-oplossing, zie de gespecialiseerde MandrakeSecurity Firewall\n"
-"distributie."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"We zullen u nu enkele vragen stellen over de diensten waar u het \n"
-"Internet toestemming voor wilt geven om mee te verbinden.\n"
-"Denk alstublieft goed na over deze vragen, omdat de veiligheid \n"
-"van uw computer op het spel staat. \n"
-"\n"
-"Wanneer u op dit moment niet één van deze diensten draait,\n"
-"blokkeer deze dan met de firewall. U kunt deze configuratie \n"
-"altijd nog veranderen door dit programma opnieuw \n"
-"te starten!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Draait u een webserver op deze machine waar het hele Internet \n"
-"bij moet kunnen? Wanneer u een webserver draait die alleen door \n"
-"deze machine aangesproken moet kunnen worden, dan kunt u \n"
-"hier veilig 'nee' antwoorden. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Draait u een 'name server' op deze machine? Als u er geen hebt \n"
-"ingesteld om IP- en zone-informatie uit te delen naar het hele \n"
-"Internet, antwoordt u dan alstublieft 'nee'. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Wilt u binnenkomende Secure Shell (ssh)-verbindingen toestaan?\n"
-"Dit is een vervanging voor telnet welke u kunt gebruiken om in te \n"
-"loggen. Als u op dit moment telnet gebruikt, dan is het ten zeerste \n"
-"aan te raden om over te schakelen naar ssh. Telnet is niet versleuteld \n"
-"-- dus sommige aanvallers kunnen uw wachtwoord stelen als u het \n"
-"gebruikt. Ssh is versleuteld en staat dit soort afluisterpraktijken \n"
-"niet toe."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Wenst u binnenkomende telnet-verbindingen toe te staan?\n"
-"Dit is vreselijk onveilig, zoals we op het vorige scherm uiteen hebben\n"
-"gezet. We raden u sterk aan hier 'Nee' te antwoorden en ssh te \n"
-"gebruiken in plaats van telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Draait u een FTP server hier die vanaf het Internet toegankelijk moet\n"
-"zijn? Zoja, dan raden wij u sterk aan deze alleen voor 'Anonymous'\n"
-"bestandsoverdrachten te gebruiken. Ieder wachtwoord dat via FTP\n"
-"verstuurd wordt kan gestolen worden door aanvallers, omdat FTP\n"
-"eveneens geen versleuteling toepast bij het versturen van wachtwoorden.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Draait u een mail-server hier? Als u uw berichten met pine,\n"
-"mutt of een andere tekstgebaseerde mail-client verstuurt,\n"
-"dan is het antwoord waarschijnlijk 'ja'. In andere gevalen\n"
-"kunt u dit het beste blokkeren met de firewall.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Draait u een POP- of IMAP-server hier? Dit zou gebruikt\n"
-"worden om niet-webgebaseerde mail-accounts te hosten\n"
-"via deze machine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Het heeft er alle schijn van dat u een 2.2-kernel draait. Als\n"
-"uw netwerk-IP automatisch wordt ingesteld door een computer\n"
-"in uw huis of kantoor (dynamische toewijzing), dan moeten\n"
-"we dit toelaten. Is dit het geval?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Wordt de tijd op uw computer gesynchroniseerd met een andere computer?\n"
-"Meestal wordt dit gebruikt door middelgrote Unix/Linux-organisaties\n"
-"om de tijd voor het loggen en dergelijke te synchroniseren. Als u geen\n"
-"deel uitmaakt van een groter kantoor en hier nog nooit van gehoord\n"
-"hebt, dan is dit waarschijnlijk niet het geval."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuratie is gereed. Kunnen we deze wijzigingen naar schijf "
-"wegschrijven?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan %s niet openen: %s \n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Fout bij het openen van %s voor schrijfbewerking: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nee, ik heb geen DHCP nodig"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, ik heb DHCP nodig"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nee, ik heb NTP niet nodig"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, ik heb NTP nodig"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Niet opslaan"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Opslaan en beëindigen"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Firewall configuratie-Wizard"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nee (dit met de firewall van internet afsluiten)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ja (dit met de firewall doorlaten)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr ""
-"Bezig met nagaan van geïnstalleerde pakketten, even geduld alstublieft..."
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Het installeren van de benodigde pakketten is mislukt: %s en Bastille.\n"
-"  Probeer ze met de hand te installeren."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netwerk-computer (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kantoor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "GNOME Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Gereedschappen voor uw Palm Pilot of uw Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinnaam en Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kantoorprogramma's: tekstverwerkers (kword, abiword), rekenbladen (kspread, "
-"gnumeric), PDF-lezers, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-gerelateerde programma's: mp3- of midi afspelen, mengpanelen etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Boeken en Howto's over Linux en Vrije Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Verzameling programma's voor post, nieuws, web, bestandsoverdracht en chatten"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL of MySQL database-server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Programma's om de configuratie van uw computer te vergemakkelijken"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Geluid"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Hulpprogramma's"
-
-#
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentatie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Commandoregel-gereedschappen"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix post-server, Inn nieuws-server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-station"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia-station"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuratie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Meer grafische bureaubladen (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Het K Desktop Environment, de basis-grafische omgeving met een verzameling "
-"van bijbehorende programma's"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische omgeving"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Programma's om CD's mee te creëren en te branden"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kantoor Werkstation"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafische programma's zoals The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C and C++ ontwikkelingsbibliotheken, programma's en include-bestanden"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netwerk-computer server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/Groupware/Nieuws"
-
-#
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Game-station"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video-afspeel- en bewerkingsprogramma's"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafisch"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Amusementsprogramma's: arcade, bordspellen, strategie etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Verzameling programma's om e-post en usenet nieuws mee te lezen en te "
-"schrijven, en om het Web mee door te bladeren"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivering, emulators, toezicht houden"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Persoonlijke Financiën"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Een grafische omgeving met gebruikersvriendelijke verzameling applicaties en "
-"bureaublad-programma's"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients voor verschillende protcollen waaronder ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Geluids- en video-afspeel- en bewerkingsprogramma's"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andere grafische bureaubladen"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editors, shells, bestandsbeheer, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programma's om uw financiën mee te beheren, zoals gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persoonlijk Gegevensbeheer"
-
-#
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD branden"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wetenschappelijk werkstation"
-
-#~ msgid "About"
-#~ msgstr "Info"
-
-#~ msgid "             Help           "
-#~ msgstr "              Help"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Kan de kernel-modules behorend bij uw kernel niet benaderen (bestand %s \n"
-#~ "is afwezig)"
diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
deleted file mode 100644
index 9a2e0106b..000000000
--- a/perl-install/share/po/no.po
+++ /dev/null
@@ -1,11745 +0,0 @@
-# KTranslator Generated File
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Terje Bjerkelia <terje@bjerkelia.com>, 1999-2000
-# Andreas Bergstrøm <abergstr@halden.net>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: 2002-03-10 11:04GMT\n"
-"Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
-"Language-Team: Norsk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr "Konfigurere all hoder uavhengig"
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr "Bruk Xinerama utvidelse"
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurer bare kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Multi-head configuration"
-msgstr "Multi-hode konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Systemet ditt støtter konfigurasjon for flere hoder.\n"
-"Hva ønsker du å gjøre?"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr "Grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr "Velg et grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr "Velg en X-tjener"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr "X-tjener"
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "Choose a X driver"
-msgstr "Velg en X driver"
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "X driver"
-msgstr "X driver"
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfigurasjon av XFree vil du ha?"
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kortet ditt kan ha støtte for maskinvare 3D akselerasjon, men bare med XFree "
-"%s.\n"
-"Kortet ditt er støttet av XFree %s som kan ha bedre støtte i 2D."
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Kortet ditt kan ha støtte for maskinvare 3D akselerasjon med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med maskinvare 3D akselerasjon"
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Kortet ditt kan ha støtte for maskinvare 3D akselerasjon med XFree %s,\n"
-"MERK AT DETTE ER EKSPERIMENTELL STØTTE OG KAN 'FRYSE' MASKINEN DIN."
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERIMENTELL maskinvare 3D akselerasjon"
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Kortet ditt kan ha støtte for maskinvare 3D akselerasjon, men bare med XFree "
-"%s,\n"
-"MERK AT DETTE ER EKSPERIMENTELL STØTTE OG KAN 'FRYSE' MASKINEN DIN.\n"
-"Kortet ditt er støttet av XFree %s som kan ha bedre støtte i 2D."
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasjons skjermdriver)"
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr "XFree konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr "Velg minnestørrelsen til grafikk-kortet ditt"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr "Velg opsjoner for tjener"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr "Velg en monitor"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametrene er den vertikale oppfrisknings-raten, som er "
-"raten\n"
-"som som oppfrisker hele skjermen, og mest viktig den horisontale \n"
-"sync-raten, som er raten som scanlinjer blir vist på.\n"
-"\n"
-"Det et VELDIG VIKTIG at du ikke spesifiserer en monitor-type med et sync- "
-"område\n"
-"som er utenfor det monitoren din er i stand til å klare: Du kan skade "
-"skjermen din.\n"
-"Hvis du er usikker, velg en konservativ innstilling."
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr "Horisontal oppfrisknings-rate"
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr "Vertikal oppfrisknings-rate"
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr "Monitor er ikke konfigurert"
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr "Grafikk-kort er ikke konfigurert ennå"
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr "Oppløsninger er ikke valgt ennå"
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr "Vil du teste konfigurasjonen?"
-
-#: ../../Xconfigurator.pm_.c:651
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr "Advarsel: testing av dette grafikk-kortet kan `fryse' maskinen din"
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr "Test konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prøv å endre noen parametere"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr "En feil oppsto:"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Slutter om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr "Er dette den riktige innstillingen?"
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr "En feil oppsto, prøv å endre noen parametere"
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr "Oppløsning"
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr "Velg oppløsning og fargedybde"
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafikk-kort: %s"
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-tjener: %s"
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mer"
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertmodus"
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr "Vis alle"
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr "Oppløsninger"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-oppsett: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Type mus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Enhet mus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafikk-kort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr "Grafikk-kort identifisering: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Minne grafikk: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Fargedybde: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Oppløsning: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-tjener: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr "Forbereder X-Window konfigurasjon"
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr "Hva ønsker du å gjøre?"
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr "Endre monitor"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr "Endre grafikk-kort"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr "Endre opsjoner for tjener"
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr "Endre oppløsning"
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr "Vis informasjon"
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr "Test igjen"
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Avslutt"
-
-#: ../../Xconfigurator.pm_.c:1585
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behold endringene?\n"
-"Nåværende konfigurasjon er:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr "X ved oppstart"
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Jeg kan sette opp maskinen din til å automatisk starte X ved oppstart.\n"
-"Vil du at X skal starte når du starter maskinen på nytt?"
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Vennligst logg inn i %s på nytt for å aktivere endringene"
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Vennligst logg ut og bruk så Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farger (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusen farger (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusen farger (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner farger (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farger (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB eller mer"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Utvidet Super VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ikke-interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Høyfrekvens SVGA, 1024x768 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Flerfrekvens som kan klare 1280x1024 ved 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor som kan klare 1600x1200 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor som kan klare 1600x1200 ved 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Første sektor av oppstartspartisjon"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Første sektor av disk (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO-installasjon"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor ønsker du installere oppstartslasteren?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installasjon"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO med tekstmeny"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk meny"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start fra DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Hovedopsjoner for oppstartslaster"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Oppstartslaster som skal brukes"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installasjon oppstartslaster"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Oppstartsenhet"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (virker ikke på gamle BIOS'er)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Skjermmodus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Forsinkelse før oppstart av standard bilde"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Passord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr "Passord (igjen)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Begrense kommandolinje-opsjoner"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "begrense"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Tøm /tmp ved hver oppstart"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiser RAM-størrelse hvis det trengs (funnet %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Slå på multiprofiler"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Oppgi ram-størrelsen i MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr "Vennligst prøv igjen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr "Passordene stemmer ikke overens"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Initmelding"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Åpne firmwareforsinkelse"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Skal det være mulig å boote fra CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Skal det være mulig å boote fra OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Standard operativsystem?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Du har bestemt deg for å installere oppstartslasteren på en partisjon.\n"
-"Dette innebærer at du allerede har en oppstartslaster på den disken du "
-"starter fra (eks: System Commander.)\n"
-"\n"
-"Hvilken disk starter du fra?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Her er de forskjellige oppføringene.\n"
-"Du kan legge til flere eller endre de eksisterende."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr "Legg til"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Ferdig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifiser"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken inngangstype vil du legge til"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Andre OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Andre OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Andre OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Bilde"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Tilføye"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Les-skriv"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabell"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Usikker"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etikett"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrdstørrelse"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Ingen video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Fjern inngang"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tom etikett er ikke tillatt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Du må velge ett kjernebilde"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Du må ha en rotpartisjon"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Denne etiketten er allerede i bruk"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fant %s %s grensesnitt"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Har du enda ett?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du noen %s grensesnitt?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr "Nei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Se maskinvareinfo"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg prøve?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I noen tilfeller trenger %s driveren å ha ekstra informasjon for å virke\n"
-"ordentlig, selv om den normalt virker fint foruten. Ønsker du å spesifisere "
-"ekstra\n"
-"opsjoner for den eller tillate driveren å sondere maskinen din for\n"
-"informasjonen den trenger? Av og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke forårsake noen skader."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spesifiser opsjoner"
-
-#: ../../any.pm_.c:725
-#, fuzzy, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Du kan nå gi modul %s de opsjoner du føler for.\n"
-"Merk at addresser bør gis med 0x prefikset som i '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nå oppgi dens opsjoner for modul %s.\n"
-"Opsjonene er i format ``navn=verdi navn2=verdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulopsjoner:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Lasting av modul %s feilet.\n"
-"Ønsker du å prøve igjen med andre parametere?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "tilgang til X-programmer"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "tilgang til rpmverktøy"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "tilgang til \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "tilgang til administrative filer"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(allerede lagt til %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dette passordet er for enkelt"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Vennligst oppgi et brukernavn"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brukernavnet kan kun inneholde små bokstaver, tall, `-' og `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Denne brukeren er allerede lagt til"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Legg til bruker"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Entre en bruker\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Godta bruker"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Virkelig navn"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr "Brukernavn"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Skall"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autoinnlogging"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Jeg kan sette opp maskinen din til å automatisk logge på en bruker ved "
-"oppstart.\n"
-"Vil du bruke denne tjenesten?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Velg standard bruker:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Velg vindushåndtereren som skal kjøres:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Vennligst velg språk som skal brukes."
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Du kan velge andre språk som vil være tilgjengelige etter installasjon"
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr "Alle"
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr "Tillat alle brukere"
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr "Skreddersydd"
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr "Ingen deling"
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakken %s må installeres. Vil du installere den?"
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "Du kan eksportere med NFS eller Samba. Hvilken av dem ønsker du"
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Obligatorisk pakke %s mangler"
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Avbryt"
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr "Start userdrake"
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"per-user deling bruker gruppen \"fileshare\". \n"
-"Du kan bruke userdrake til å legge til en bruker i denne gruppen."
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackers"
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr "Dårlig"
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr "Høy"
-
-#: ../../any.pm_.c:1041
-msgid "Higher"
-msgstr "Høyere"
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dette nivået bør brukes med forsiktighet. Det gjør systemet ditt lettere å\n"
-"bruke, men mer utsatt: det må ikke brukes på en maskin koblet til andre\n"
-"eller til Internett. Det er ingen adgang med passord."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Passord er nå aktivert, men bruk som nettverksmaskin er fortsatt ikke "
-"anbefalt."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dette er standard sikkerhet anbefalt for en maskin som vil bli brukt til "
-"tilkobling mot Internett som klient."
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Det er allerede noen restriksjoner, og flere automatiske kontroller kjøres "
-"hver natt."
-
-#: ../../any.pm_.c:1051
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Med dette sikkerhetsnivået kan systemet brukes som tjener.\n"
-"Sikkerheten er nå høy nok til å bruke systemet som en tjener som godtar\n"
-"oppkoblinger fra mange klienter. Merk: Hvis maskinen din kun er en klient på "
-"Internett burde du velge et lavere nivå."
-
-#: ../../any.pm_.c:1054
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Basert på forrige nivå, men nå er systemet fullstendig stengt.\n"
-"Sikkerhetsfunksjonene er nå på maksimum."
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr "Velg sikkerhetsnivå"
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr "Sikkerhetsnivå"
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr "Bruk libsafe for tjenere"
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Ett bibliotek som beskytter mot buffer overflow og strengformateringsangrep."
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkommen til %s, operativsystem-velgeren!\n"
-"\n"
-"Velg et operativsystem fra listen over eller\n"
-"vent %d sekunder for standard oppstart.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB, operativsystem-velgeren!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Bruk %c og %c tastene for å velge hvilken inngang som er markert."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Trykk enter for † starte opp valgt OS, 'e' for † redigere"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoer for oppstart, eller 'c' for en kommandolinje."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den markerte inngangen vil bli startet automatisk om %d sekunder."
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr "ikke nok plass i /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr "Skrivebord"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr "Startmeny"
-
-#: ../../bootloader.pm_.c:1047
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere oppstartslasteren på en %s partisjon\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ingen hjelp implementert ennå.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Oppstartsstilkonfigurasjon"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fil"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fil/_Avslutt"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradisjonell monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradisjonell Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Start Aurora ved oppstart"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruker for øyeblikket %s som oppstartshåndterer.\n"
-"Klikk på Konfigurer for å starte oppsett-hjelperen."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurer"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systemmodus"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr "Start W-Windowsystemet ved oppstart"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nei, jeg vil ikke ha autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg vil ha autologin med denne (bruker; skrivebord)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan ikke åpne /etc/inittab for lesing: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minutt"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Jeg kan ikke ta skjembilder før partisjonering."
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Skjermbilder vil være tilgjengelig etter installasjon i %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr "Frankrike"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tjekkia"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Germany"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Hellas"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norge"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sverige"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr "Netherlands"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Østerrike"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr "USA"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Vennligst ta sikkerhetskopi av din data først"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr "Les nøye!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Hvis du skal bruke aboot, være nøye med å la det være ledig plass (2048 "
-"sektorer er nok)\n"
-"ved begynnelsen av disken"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Feil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Velg handling"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har en stor FAT partisjon\n"
-"(vanligvis brukt av Microsoft Dos/Windows).\n"
-"Jeg forslår at du først endrer størrelsen på denne partisjonen\n"
-"(klikk på den, klikk så på \"Endre størrelse\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Vennligst klikk på en partisjon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journal filsystem"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Veksel"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr "Andre"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Filsystemtyper:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Opprett"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Bruk ``%s'' istedet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Slett"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Bruk ``Demonter'' først"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter endring av type på partisjon %s, vil alle data på denne partisjonen gå "
-"tapt"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Velg en partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Velg en annen partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Avslutt"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Skift til ekspertmodus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Skift til normalmodus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Angre"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Fortsette likevel?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Avslutt uten å lagre"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Avslutt uten å skrive partisjonstabellen?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ønsker du å lagre modifiseringen av /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatisk allokering"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Fjern alle"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Harddisk informasjon"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle primære partisjoner er i bruk"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Jeg kan ikke legge til flere partisjoner"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"For å ha flere partisjoner vennligst slett en for å kunne opprette en "
-"utvidet partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Lagre partisjonstabeller"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Redde partisjonstabell"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Nødpartisjonstabell"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Last partisjonstabell på nytt"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Fjernbart media automontering"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Velg fil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Kopien av partisjonstabellen har ikke samme størrelse\n"
-"Fortsette for det?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advarsel"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sett inn en diskett i stasjonen\n"
-"Alle data på denne disketten vil gå tapt"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Prøver å redde partisjonstabell"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljert informasjon"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Monteringspunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Valg"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr "Endre størrelse"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr "Flytt"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formater"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Legg til RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Legg til LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demonter"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifiser RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Bruk for loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Opprette en ny partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Start sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr "Størrelse i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr "Filsystemtype: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr "Monteringspunkt: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Valg: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Fjern loopbackfilen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Endre partisjonstype"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem ønsker du?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Bytter fra ext2 til ext3"
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvor vil du montere loopback-filen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor vil du montere %s enheten?"
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan ikke fjerne monteringspunkt da denne partisjonen blir brukt til\n"
-"loopback. Fjern loopback først"
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr "Beregner fat filsystemgrense"
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Endrer størrelse"
-
-#: ../../diskdrake/interactive.pm_.c:617
-msgid "This partition is not resizeable"
-msgstr "Denne partisjonen kan ikke størrelsen forandres på"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data på denne partisjonen burde sikkerhetskopieres"
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter endring av størrelse for partisjon %s, vil alle data på denne\n"
-"partisjonen vil gå tapt"
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr "Velg den nye størrelsen"
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr "Ny størrelse i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk vil du flytte til?"
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor vil du flytte til?"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr "Flytter"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr "Flytter partisjon..."
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr "Velg en eksisterende RAID for å legge til"
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr "Velg en eksisterende LVM for å legge til"
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr "LVM navn?"
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr "Denne partisjonen kan ikke brukes for loopback"
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr "Loopback filnavn: "
-
-#: ../../diskdrake/interactive.pm_.c:785
-msgid "Give a file name"
-msgstr "Gi ett filnavn"
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen blir allerede brukt av en annen loopback, velg en annen"
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr "Filen eksisterer allerede. Bruke denne?"
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr "Monteringsvalg:"
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr "enhet"
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr "nivå"
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr "skivestørrelse"
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr "Vær forsiktig: denne operasjonen er farlig."
-
-#: ../../diskdrake/interactive.pm_.c:914
-msgid "What type of partitioning?"
-msgstr "Hva slags type partisjonering?"
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Beklager, jeg vil ikke tillate oppretting av /boot så lange inne på disken "
-"(på en sylinder > 1024).\n"
-"Enten bruker du LILO og denne ikke virker, eller du bruker ikke LILO og du "
-"trenger ikke /boot"
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partisjonen du valgte å legge til som root (/) er lokalisert fysisk "
-"bortenfor\n"
-"den 1024'de sylinderen på hard-disken, og du har ingen /boot partisjon.\n"
-"Hvis du skal bruke oppstartshåndtereren LILO, vær nøye med å legge til en\n"
-"/boot partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valgt en programvare RAID partisjon som root (/).\n"
-"Ingen oppstartslaster kan håndtere dette uten en /boot partisjon.\n"
-"Så vær nøye med å legge til en /boot partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisjonstabellen på disk %s blir nå skrevet til disk!"
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft"
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Etter formatering av partisjon %s vil alle data på denne partisjonen\n"
-"gå tapt"
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr "Formatering"
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partisjon %s"
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Hide files"
-msgstr "Gjem filer"
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Move files to the new partition"
-msgstr "Flytt filer til en ny partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Katalogen %s inneholder allerede noe data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-msgid "Moving files to the new partition"
-msgstr "Flytt filer til en ny partisjon"
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partisjon %s er nå kjent som %s"
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr "Enhet: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS diskbokstav: %s (bare en gjetning)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr "Navn: "
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr "Størrelse: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sylinder %d til %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr "Formatert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr "Ikke formatert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr "Montert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-fil(er): \n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partisjon startet opp som standard\n"
-"    (for MS-DOS oppstart, ikke for lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivå %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Skivestørrelse %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-disker %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback filnavn: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Det er store sjanser for at\n"
-"denne partisjonen er en\n"
-"driverpartisjon, du bør nok\n"
-"la den være i fred.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne spesielle Bootstrap-\n"
-"partisjonen er for å\n"
-"dual-boote ditt system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr "Størrelse: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disker %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Type partisjonstabell: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "på buss %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Filesystem encryption key"
-msgstr "Filsystemkrypteringsnøkkel"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr "Velg din filsystemkrypteringsnøkkel"
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Denne krypteringsnøkkelen er for enkel (må være minst %d tegn lang)"
-
-#: ../../diskdrake/interactive.pm_.c:1143
-msgid "The encryption keys do not match"
-msgstr "Krypteringsnøkkelene stemmer ikke overens"
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr "Krypteringsnøkkel"
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr "Krypteringsnøkkel (igjen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Endre type"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a medium"
-msgstr "Vennligst klikk på ett media"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Søk tjenere"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering av %s mislykket"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Jeg vet ikke hvordan formatere %s i type %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montere partisjon %s i katalog %s gikk ikke"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck avsluttet med feilkode %d eller signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "feil ved demontering av %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "enkel"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "med /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruke JFS for partisjoner mindre enn 16 MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruke ReiserFS for partisjoner mindre enn 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringspunkter må begynne med /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Det finnes allerede en partisjon med monteringspunkt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruke LVM logisk volum som monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Denne katalogen bør forbli i root filsystemet"
-
-#: ../../fsedit.pm_.c:486
-#, fuzzy
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Du trenger et virkelig filsystem (ext2, reiserfs) for dette "
-"monteringspunktet\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Du kan ikke bruke ett kryptert filsystem som monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Ikke nok plass for auto-allokering"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ikkenoe å gjøre"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Feil ved åpning av %s for skriving: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye "
-"filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Du har ingen partisjoner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux er ett multibrukersystem, og dette betyr at hver bruker kan ha "
-"sine\n"
-"instillinger, sine egne filer osv. Du kan lese brukerguiden for å få vite "
-"mer.\n"
-"Men i motsetning til root, som er administratoren, så vil brukerene du "
-"legger til\n"
-"her ikke ha rett til å forandre noe annet enn deres egne filer "
-"ogkonfigurasjon.\n"
-"Du må lage minst en bruker for deg selv.\n"
-"Denne kontoen bør du bruke for all rutinebruk. Selv om det er praktisk å "
-"logge\n"
-"inn som root hver dag, kan deg også være veldig farlig! Den minste feil "
-"kunne\n"
-"bety at systemet ditt ikke lenger virker. Hvis du gjør en stor feil som en "
-"vanlig\n"
-"bruker vil du kunne miste noe informasjon, men ikke hele systemet.\n"
-"\n"
-"Først må du skrive inn ditt virkelige navn. Dette er ikke nødvendig, da du "
-"kan\n"
-"skrive inn hva du vil. drakX vil ta det første ordet du legger inn og "
-"foreslå det som\n"
-"brukernavn. Dette er det brukernavnet den brukeren vil bruke for å logge seg "
-"på\n"
-"systemet. Du kan forandre det. Du må legge inn ett passord her. En "
-"ikkepriviligert\n"
-"brukers passord er ikke så viktig som root sitt sett i fra "
-"systemsikkerhetens side,\n"
-"men det er ingen grunn til ignorere det av den grunn, det er dine filer som "
-"er i \n"
-"faresonen.\n"
-"\n"
-"Hvis du klikker på aksepter bruker kan du da legge til så mange brukere som "
-"du\n"
-"vil. Når du har lagt til alle de brukerene du ønsker, klikk på ferdig.\n"
-"\n"
-"Ved å klikke på avansert kan du forandre hvilket shell brukeren har som "
-"standard.\n"
-"(Det vanlige er bash)"
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovenfor nevnes de eksisterende Linux partisjonene oppdaget på\n"
-"harddisken din. Du kan beholde valg som er gjort av hjelperen, de er gode "
-"for vanlig\n"
-"bruk. Du kan endre disse valgene, du må i hvertfall definere en root\n"
-"partisjon (\"/\"). Ikke velg for liten partisjon ellers vil du ikke kunne\n"
-"installere nok programvare. Hvis du ønsker å lagre dine data på en separat "
-"partisjon\n"
-"må du også velge en \"/home\" (bare mulig hvis du har mer enn en\n"
-"Linux partisjon tilgjengelig).\n"
-"\n"
-"\n"
-"For informasjon, hver partisjon er listet som følger: \"Navn\", \"Kapasitet"
-"\".\n"
-"\n"
-"\n"
-"\"Navn\" er kodet som følger: \"harddisk type\", \"harddisk nummer\",\n"
-"\"partisjon nummer\" (f.eks., \"hda1\").\n"
-"\n"
-"\n"
-"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
-"\"\n"
-"hvis den er en SCSI harddisk.\n"
-"\n"
-"\n"
-"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
-"IDE harddisker:\n"
-"\n"
-"   * \"a\" betyr \"master harddisk på primær IDE kontroller\",\n"
-"\n"
-"   * \"b\" betyr \"slave harddisk på primær IDE kontroller\",\n"
-"\n"
-"   * \"c\" betyr \"master harddisk på sekundær IDE kontroller\",\n"
-"\n"
-"   * \"d\" betyr \"slave harddisk på sekundær IDE kontroller\".\n"
-"\n"
-"\n"
-"Med SCSI harddisker, en \"a\" betyr \"primær harddisk\", en \"b\" betyr "
-"\"sekundær harddisk\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux installasjonen er spredd ut over flere CDROMer. DrakX \n"
-"vet om en pakke er på en annen CDROM og vil spytte ut den våværende\n"
-"CD og be deg sette i en annen en ved behov."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det er nå på tide å spesifisere hvilke programmer du ønsker å installere på\n"
-"systemet ditt. Det er tusenvis av pakker tilgjengelig for Mandrake Linux, og "
-"det er ikke meningen at du skal kunne navnet på samtlige.\n"
-"\n"
-"Hvis du utfører en standard installasjon fra CDROM, vil du først bli bedt "
-"om\n"
-"å spesifisere de CDene du har for øyeblikket (kun i ekspertmodus). Sjekk "
-"CDene\n"
-"og velg de bokser som tilsvarer de CDer som du har klare for installasjon.\n"
-"Klikk \"OK\" når du er klar til å fortsette.\n"
-"\n"
-"Pakkene er delt inn i grupper som korresponderer til typisk bruk av din "
-"maskin\n"
-"Gruppene er igjen delt inn i fire seksjoner:\n"
-"\n"
-" * \"Arbeidsstasjon\": hvis du planlagger å bruke din maskin som "
-"arbeidsstasjon, velg\n"
-"en eller flere av de tilhørende grupper.\n"
-"\n"
-" * \"Utvikling\": hvis maskinen skal brukes til programmering, velg ønskede "
-"grupper.\n"
-"\n"
-" * \"Server\": Hvis maskinen skal brukes som server, vil du kunne velge\n"
-"hvilke av de mest vanlige tjenester som du ønsker installert på\n"
-"maskinen.\n"
-"\n"
-" * \"Grafisk miljø\": til slutt, det er her du kan velge ditt ønskede\n"
-"grafiske miljø. Du må velge minst ett hvis du ønsker å ha en grafisk\n"
-"arbeidsstasjon!\n"
-"\n"
-"Ved å flytte musepekeren over et gruppenavn vil en kort forklarende tekst\n"
-"dukke opp over den gruppen. Hvis du ønsker å ikke velge noen grupper under\n"
-"installasjon (og du ikke oppgraderer), så vil en dialog spørre deg om hva\n"
-"slags minimal installasjon du ønsker:\n"
-"\n"
-"* \"Med X\" For en minste installasjon med X-tjener inkludert;\n"
-"\n"
-" * \"With basic documentation\" Installerer basesystemet pluss standard\n"
-"verktøy og dokumentasjon for disse. Denne installasjonen passer til å sette\n"
-"opp en server.\n"
-"\n"
-" * \"Truly minimal install\" vil installere minimum som er nødvendig for å\n"
-"Linux systemet opp og gå, kun kommandolinje. Denne installasjonen er på\n"
-"rundt 65Mb.\n"
-"\n"
-"Du kan merke av \"Individual package selection\" boksen, som er nyttig\n"
-"hvis du kjenner til pakkene som blir tilbydt eller hvis du ønsker å ha\n"
-"total kontroll over hva som vil bli installert.\n"
-"\n"
-"Hvis du startet installasjonen i \"Upgrade\" modus, kan du velge vekk alle\n"
-"grupper for å unngå å installere noen nye pakker. Dette er nyttig for\n"
-"reparasjon eller oppdatering av et eksisterende system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Til slutt, avhengig av ditt valg av om du vil velge enkeltpakker eller\n"
-"ikke, så vil du få se ett tre som inneholder alle pakkene sortert på "
-"grupper\n"
-"og undergrupper. Når du surfer gjennom treet, kan du velge grupper, \n"
-"undergrupper eller individuelle pakker.\n"
-"\n"
-"Når du velger en pakke i treet, vil en beskrivelse dukke opp til høyre. \n"
-"Når du er ferdig med å velge, klikk \"Installer\" knappen som da vil starte\n"
-"installasjonsprosessen. Avhengig av hastigheten på din maskin, og antall\n"
-"pakker som skal installeres, kan det ta en stund å gjøre ferdig "
-"installasjonen.\n"
-"Ett estimat på hvor lang tid det vil ta vises på skjermen for å hjelpe deg "
-"å\n"
-"avgjøre om du har tid til en kopp kaffe.\n"
-"\n"
-"!! Hvis en tjenerpakke har blitt valgt, vil du bli bedt om å bekrefte at du "
-"ønsker\n"
-"å installere denne. Under Mandrake Linux vil alle installerte tjenere bli \n"
-"startet ved oppstart. Selv om de er sikre og ikke har noen kjente "
-"sikkerhetshull\n"
-"når denne distribusjonen ble sluppet, så kan det være at sikkerhetshull "
-"ble \n"
-"oppdaget etter at denne versjonen av Mandrake Linux ble sluppet. Hvis du\n"
-"ikke vet hva en type tjene gjør, eller hvorfor den blir installert, klikk "
-"\"Nei\".\n"
-"\"Ja\" vil installere tjeneren(e) og de(n) vil bli started automatisk som "
-"standard.\n"
-"\n"
-"\"Automatiske avhengigheter\" valget bare fjerner advarselsdialogboksen som\n"
-"kommer når installasjonsprogrammet automatisk velger en pakke. Dette skjer "
-"fordi\n"
-"den har funnet ut at den må tilfredsstille en avhengighet med en annen pakke "
-"for\n"
-"å fullstendig gjennomføre installasjonen.\n"
-"\n"
-"Det lille diskettikonet på bunnen av listen lar deg laste pakkelisten som du "
-"valgte\n"
-"under en tidligere installasjon. Når du klikker på dette ikonet vil du bli "
-"bedt om å\n"
-"sette inn disketten som ble laget under avslutningen av en annen "
-"installasjon. Se\n"
-"det andre tipset for det siste skrittet for hvordan lage en slik diskett."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Før du går videre bør du lese lisensen nøye.\n"
-"Den dekker hele Mandrake Linux distribusjonen og hvis du ikke er enig\n"
-"med alt den sier, klikk på \"Jeg nekter\" knappensom øyeblikkelig\n"
-"avslutter installasjonen. For å fortsette installasjonen, klikk på\n"
-"\"Jeg aksepterer\" knappen."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"På dette punktet er det tid for å velge sikkerhetsnivået som passer for\n"
-"maskinen. Som en tommelfingerregel, jo mere utsatt maskinen er, og jo mere\n"
-"viktig data som er lagret der, jo høyere bør sikkerhetsnivået være.\n"
-"Men, et høyere sikkerhetsnivå går gjerne på beskostning av "
-"brukvennligheten.\n"
-"Se i MSEC kapittelet i ``Reference Manual'' for å få mer informasjon om\n"
-"disse nivåene.\n"
-"\n"
-"Hvis du ikke vet hva du skal velge, behold standard valg."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"På dette punktet må du velge hvilken\n"
-"partisjon(er) som skal brukes til å installere ditt nye Mandrake Linux "
-"system. Hvis partisjoner\n"
-"allerede har blitt definert (fra en tidligere installasjon av GNU/Linux "
-"eller fra\n"
-"et annet partisjoneringsverktøy), kan du bruke eksisterende partisjoner. I "
-"andre tilfeller\n"
-"må harddiskpartisjoner defineres.\n"
-"\n"
-"\n"
-"For å opprette partisjoner må du først velge en harddisk. Du kan velge disk\n"
-"for partisjonering ved å klikke på \"hda\" for den første IDE disken, \"hdb"
-"\" for\n"
-"den andre eller \"sda\" for den første SCSI disken osv.\n"
-"\n"
-"\n"
-"For å partisjonere den valgte harddisken kan du bruke disse valgene:\n"
-"\n"
-"   * Fjern alle: dette valget sletter alle partisjoner tilgjengelig på den "
-"valgte harddisken.\n"
-"\n"
-"\n"
-"   * Auto allokering:: dette valget lar deg automatisk opprette Ext2 og "
-"veksel partisjoner på den ledige plassen på\n"
-"     harddisken din.\n"
-"\n"
-"\n"
-"   * Redd partisjonstabell: hvis partisjonstabellen din er skadet kan du "
-"forsøke å redde den ved å bruke dette valget. Vær\n"
-"     forsiktig og husk at det kan gå galt.\n"
-"\n"
-"\n"
-"   * Angre: du kan bruke dette valget til kanselere endringene dine.\n"
-"\n"
-"\n"
-"   * Last igjen: du kan bruke dette valget hvis du angrer alle endringer og "
-"vil laste partisjonstabellen du begynte med\n"
-"\n"
-"\n"
-"   * Veiviser: Hvis du ønsker å bruke en hjelper til å partisjonere "
-"harddisken din kan du bruke dette valget. Anbefales hvis\n"
-"     du ikke har god kunnskap om partisjonering.\n"
-"\n"
-"\n"
-"   * Gjenopprett fra diskett: hvis du har lagret partisjonstabellen din på "
-"en diskett under en tidligere installasjon kan du\n"
-"     gjenopprette denne ved å bruke dette valget.\n"
-"\n"
-"\n"
-"   * Lagre på diskett: hvis du ønsker å lagre partisjonstabellen din på en "
-"diskett for å kunne gjenopprette denne kan du bruke dette\n"
-"     valget. Det anbefales på det sterkeste å bruke dette valget.\n"
-"\n"
-"\n"
-"   * Ferdig: når du er ferdig med å partisjonere harddisken din bruk dette "
-"valget til å lagre endringene dine.\n"
-"\n"
-"\n"
-"For informasjon kan du nå valgene ved å bruke tastaturet: naviger gjennom "
-"partisjonene ved å bruke Tab og Up/Down pilene.\n"
-"\n"
-"\n"
-"Når en partisjon er valgt kan du bruke:\n"
-"\n"
-"           * Ctrl-c til å opprette en ny partisjon (når en tom partisjon er "
-"valgt)\n"
-"\n"
-"           * Ctrl-d til å slette en partisjon\n"
-"\n"
-"           * Ctrl-m til å sette monteringspunktet\n"
-".............\n"
-"\n"
-".............\n"
-"Hvis du installerer på en PPV maskin, så vil du nok lage en liten "
-"HFS'bootstrap-partisjon' på minst en megabyte for bruk\n"
-"av yaboot oppstartslasteren. Hvis du ønsker  å lage partisjonen litt større, "
-"laoss si 50 MB, så kan du kanskje lagre en ekstra kjene og ramdiskbilde for "
-"nødsituasjoner."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mer enn en Microsoft Windows partisjon har blitt\n"
-"oppdaget på harddisken din. Vennligst velg den du ønsker å endre størrelsen "
-"på for å\n"
-"installere ditt nye Mandrake Linux operativsystem.\n"
-"\n"
-"\n"
-"For informasjon, hver partisjon er listet som følger: \"Linux navn\", "
-"\"Windows\n"
-"navn\" \"Kapasitet\".\n"
-"\n"
-"\"Linux navn\" er kodet som følger: \"harddisk type\", \"harddisk nummer\",\n"
-"\"partisjon nummer\" (f.eks., \"hda1\").\n"
-"\n"
-"\n"
-"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
-"\"\n"
-"hvis den er en SCSI harddisk.\n"
-"\n"
-"\n"
-"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
-"IDE harddisker:\n"
-"\n"
-"   * \"a\" betyr \"master harddisk på primær IDE kontroller\",\n"
-"\n"
-"   * \"b\" betyr \"slave harddisk på primær IDE kontroller\",\n"
-"\n"
-"   * \"c\" betyr \"master harddisk på sekundær IDE kontroller\",\n"
-"\n"
-"   * \"d\" betyr \"slave harddisk på sekundær IDE kontroller\".\n"
-"\n"
-"Med SCSI harddisker, en \"a\" betyr \"primær harddisk\", en \"b\" betyr "
-"\"sekundær harddisk\", etc.\n"
-"\n"
-"\"Windows navn\" er bokstaven på harddisken din under Windows (den første "
-"disken\n"
-"eller partisjonen er kalt \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Vær tålmodig. Denne operasjonen kan ta flere minutter."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vennligst velg den riktige porten. F.eks., \"COM1\" porten under\n"
-"Windows blir kalt \"ttyS0\" i GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) og Grub er oppstartslastere: de kan starte opp enten\n"
-"GNU/Linux eller et annet operativsystem som du har på datamaskinen din.\n"
-"Normalt blir de andre operativsystemene korrekt oppdaget og installert.\n"
-"Hvis dette ikke er tilfelle, kan du legge til disse for hånd i dette\n"
-"bildet. Vær nøye med å velge de korrekte parameterene.\n"
-"\n"
-"Hvis du ikke ønsker å gi tilgang til de andre operativsystemene til\n"
-"andre kan du fjerne linjene for disse. Men i så tilfelle trenger du\n"
-"en oppstartsdiskett for å starte disse!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Du må indikere hvor du ønsker å\n"
-"plassere informasjonen som behøves for oppstart av GNU/Linux.\n"
-"\n"
-"Med mindre du vet akkurat hva du gjør, velg \"Første sektor av\n"
-"disken (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan legge til flere valg for yaboot, enten for andre operativsystemer\n"
-"andre kjerner, eller for ett nødbootspeil.\n"
-"\n"
-"For andre OS består inngangen bare av et navn og rotpartisjonen\n"
-"\n"
-"For Linux er det et par mulige valg:\n"
-"\n"
-" * Label: Dette er navnet du vil skrive ved yaboot klartegnet for å velge\n"
-"dette oppstartsvalget.\n"
-"\n"
-" * Image: Dette er navnet på kjernen for oppstart. Typisk vmlinux\n"
-"eller en variasjon av vmlinux med en utvidelse.\n"
-"\n"
-" * Root: \"root\" enheten eller \"/\" for Linux installasjonen din.\n"
-"\n"
-" * Append: På Apple maskinvare er kjerneopsjonen append ofte brukt til\n"
-"å assistere i initialisering av video maskinvare, eller til å slå på "
-"tastatur\n"
-"museknapp emulering for de ofte manglende andre og tredje museknappene på "
-"en\n"
-"Apple mus. Her er noen eksempler:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: Dette valget kan brukes enten til å laste initiale moduler, før\n"
-"oppstartsenheten er tilgengelig, eller til å laste et ramdisk-bilde for en\n"
-"nødoppstart situasjon.\n"
-"\n"
-" * Initrd-size: Standard ramdisk størrelse er vanligvis 4,096 bytes. Hvis "
-"du\n"
-"trenger å allokere en stor ramdisk, kan dette valget brukes.\n"
-"\n"
-" * Read-write: Normalt kommer \"root\" partisjonen opp som read-only for å\n"
-"la et filsystem sjekke for systemet system blir \"live\".\n"
-"Her kan du overstyre dette valget.\n"
-"\n"
-" * NoVideo: Skulle Apple video maskinvaren vise seg å være veldig\n"
-"problematisk, kan du velge dette valget for å starte i \"novideo\" modus, "
-"med\n"
-"egen framebuffer støtte.\n"
-"\n"
-" * Default: Velger denne inngangen som standard Linux valg, og kan velges\n"
-"ved å trykke ENTER ved yaboot klartegnet. Denne inngangen vil også bli\n"
-"fremhevet med en \"*\", hvis du trykker [Tab] for å se oppstarts-\n"
-"valgene."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en oppstartslaster for NewWorld MacIntosh maskinvare. Den kan\n"
-"starte enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede på din\n"
-"datamaskin. Vanligvis vil disse andre operativsystemer bli korrekt oppdaget\n"
-"og installert. Hvis dette ikke skulle være tilfelle kan du legge til "
-"endringer\n"
-"her. Vær forsiktig når du velger de korrekte parametre.\n"
-"\n"
-"Yaboots hovedvalg er:\n"
-"\n"
-"\n"
-" * Init beskjed: En enkel melding som vises før oppstartsprosessen starter.\n"
-"\n"
-" * Oppstartsenhet: Indikerer hvor du ønsker å plassere informasjonen som "
-"trengs\n"
-"for å starte GNU/Linux. Du vil generelt ha satt opp en bootstrap-partisjon\n"
-"tidligere for å ta vare på denne informasjonen.\n"
-"\n"
-" * Åpne firmwareforsinkelse: Ulikt LILO så er det to forsinkelser\n"
-"som er tilgjengelig med yaboot. Den første forsinkelsen blir målt i\n"
-"sekunder og du kan ved det punktet velge mellom CD, OF-boot, \n"
-"MacOS eller Linux.\n"
-"\n"
-" * Kjerneboot Timeout: Denne er lik LILO oppstartsforsinkelse.\n"
-"Etter å ha valgt Linux, vil du ha 0,1 sekunder før standard kjerne\n"
-"blir valgt.\n"
-"\n"
-" * Aktiver CD Boot?: Hvis du velger dette valget vil du kunne\n"
-"trykke \"C\" for CD ved det første oppstartsvalget.\n"
-"\n"
-" * Aktiver OF Boot?: Hvis du velger dette valget vil du kunne\n"
-"trykke\n"
-"\"N\" for Open Firmware ved det første oppstartsvalget.\n"
-"\n"
-" * Standard OS: Du kan velge hvilket OS som skal lastes når\n"
-"Open Firmwareforsinkelsen er utløpt."
-
-#: ../../help.pm_.c:862
-#, fuzzy
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": DrakX gjetter tidssonen din ut i fra språket du\n"
-"har valgt. Men her, også for valget av tastatur, er du kanskje ikke\n"
-"i det landet som valgt språk skulle tilsi.\n"
-"Derfor må du kanskje klikke på \"Timezone\" knappen for å konfigurere\n"
-"klokken til tidssonen der du er.\n"
-"\n"
-" * \"Printer\": Klikke på \"No Printer\" knappen vil åpne skriver\n"
-"konfigureringshjelperen.\n"
-"\n"
-" * \"Sound card\": Hvis et lydkort blir oppdaget på systemet ditt, blir det\n"
-"vist her. Ingen modifisering mulig under installering.\n"
-"\n"
-" * \"TV card\": Hvis et TV-kort blir oppdaget på systemet ditt, blir det\n"
-"vist her. Ingen modifisering mulig under installering.\n"
-"\n"
-" * \"ISDN card\": Hvis et ISDN-kort blir oppdaget på systemet ditt, blir "
-"det\n"
-"vist her. Du kan klikke på knappen for å endre parameterene assosiert\n"
-"til dette."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Velg den harddisken du ønsker å slette for å installere din nye Mandrake\n"
-"Linux partisjon. Vær forsiktig, alle data på denne vil gå tapt og vil ikke\n"
-"kunne gjenopprettes!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klikk på \"OK\" hvis du ønsker å slette alle data og partisjoner på denne\n"
-"harddisken. Vær forsiktig, etter at du har klikket på \"OK\" vil du ikke\n"
-"kunne gjenopprette data og partisjoner på denne harddisken inkludert "
-"Windows\n"
-"data.\n"
-"\n"
-"Klikk på \"Avbryt\" for å avbryte denne operasjonen uten å miste data og\n"
-"partisjoner på denne harddisken."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kan ikke få tilgang til kjernemoduler ihht. kjernen din (fil %s mangler), "
-"dette betyr vanligvis at oppstartsdisketten din ikke er i synk med "
-"installasjonsmediet (vennligst opprett en nyere diskett)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Du må også formatere %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"D har valgt følgende tjener(e): %s\n"
-"\n"
-"\n"
-"Disse tjenerene er aktivert som standard. De har ingen kjente sikkerhets-\n"
-"problemer, men noen nye kan bli funnet. I så tilfelle må du oppgradere\n"
-"så snart som mulig.\n"
-"\n"
-"\n"
-"Ønsker du virkelig å installere disse tjenerene?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan ikke bruke broadcast med intet NIS domene"
-
-#: ../../install_any.pm_.c:794
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sett inn en FAT-formatert diskett i stasjon %s"
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr "Denne disketten er ikke FAT-formatert"
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For å bruke dette valget av pakker, start installasjonen med'linux "
-"defcfg=floppy'"
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Feil ved lesing av fil %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Noe maskinvare i maskinen din trenger ``riktige'' drivere for å virke.\n"
-"Du kan finne noe informasjon om disse her: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du må ha en root-partisjon.\n"
-"Opprett en partisjon for dette (eller klikk på en eksisterende).\n"
-"Velg så ``Monteringspunkt'' og  sett dette til `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Du må ha en vekslingspartisjon"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen vekselpartisjon\n"
-"\n"
-"Fortsette likevel?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du må ha en FAT-parisjonen montert under /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Bruk ledig plass"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok plass til å allokere en ny partisjon"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partitions"
-msgstr "Bruk eksisterende partisjon"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Det finnes ingen eksisterende partisjon som kan brukes"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Bruk Windows partisjonen for loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partisjon vil du bruke for Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Velg størrelsene"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Root-partisjonsstørrelse i MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veksel-partisjonsstørrelse i MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Bruk den ledige plassen på Windows partisjonen"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partisjonstype ønsker du å forandre størrelse på?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing Windows partition"
-msgstr "Beregner Windows filsystemgrense"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Størrelsesendreren for FAT greide ikke å håndtere din partisjon, \n"
-"følgende feil oppsto: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Windows-partisjonen din er for fragmentert, vennligst kjør ``defrag'' først"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil nå endre størrelsen på Windows partisjonen din. Vær\n"
-"forsiktig: denne operasjonen er farlig. Hvis du ikke allerede har\n"
-"gjort det burde du først kjøre scandisk under Windows (og som en\n"
-"opsjon kjøre defrag) på denne partisjonen og ta sikkerhetskopi av dine "
-"data.\n"
-"Når du er sikker, trykk Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for Windows on"
-msgstr "Hvilken størrelse ønsker du å beholde vinduer på?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partisjon %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Krymping/forstørring av FAT feilet: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Det finnes ingen FAT partisjon å forandre størrelsen på eller å bruke som "
-"loopback (ikke nok plass igjen)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Slette hele disken"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mer enn en harddisk, hvilken ønsker du å installere linux på?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ALLE eksisterende partisjoner og deres data vil være tapt på disk %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Egendefinert diskpartisjonering"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Bruk fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan nå partisjonere %s.\n"
-"Når du er ferdig ikke glem å lagre med `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har ikke nok ledig plass på Windows partisjonen din"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Jeg kan ikke finne noe rom for installering"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partisjonsveiviseren fant følgende løsninger:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisjonering feilet: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Henter opp nettverket"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Tar ned nettverket"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"En feil oppsto, men jeg vet ikke hvordan jeg skal håndtere dette på en\n"
-"pen måte.\n"
-"Fortsett på eget ansvar."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dupliser monteringspunkt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Noen viktige pakker ble ikke installert ordentlig.\n"
-"Det er noe galt enten med CD-rom'en eller CD-platen.\n"
-"Sjekk cd-platen på en installert maskin med \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ingen diskettstasjon tilgjengelig"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrer trinn `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Systemet ditt har lite ressurser. Du kan muligens oppleve noen problemer\n"
-"ved installering av Mandrake Linux. Hvis dette skjer kan du prøve tekst- "
-"installering\n"
-"i stedet. Trykk `F1' ved oppstart av CD-ROM, skriv så `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installeringsklasse"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Vennligst velg en av følgende installasjonsklasser:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totale størrelsen for gruppene du har valgt er omtrent %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Hvis du ønsker å installere mindre enn denne størrelsen,\n"
-"velg den prosentdelen av pakkene som du ønsker å installere.\n"
-"\n"
-"En lav prosentdel vil installere bare de mest viktige pakkene;\n"
-"en prosentdel på 100%% vil installere alle valgte pakker."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Du har plass på disken din for bare %d%% av disse pakkene.\n"
-"\n"
-"Hvis du ønsker å installere mindre enn dette,\n"
-"velg den prosentdelen av pakkene som du ønsker å installere.\n"
-"En lav prosentdel vil installere bare de mest viktige pakkene;\n"
-"en prosentdel på %d%% vil installere så mange pakker som mulig."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Du vil kunne velge disse mere spesifisert i neste trinn."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prosentdel av pakker å installere"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr "Valg pakkegruppe"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total størrelse: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Dårlig pakke"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versjon: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Størrelse: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Viktighet: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan ikke velge denne pakken da det ikke er igjen nok plass til å "
-"installere denne"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Følgende pakker vil bli installert"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Følgende pakker vil bli fjernet"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke velge/fjerne denne pakken"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en bestemt pakke, den kan ikke fjernes"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke fjerne denne pakken, den er allerede installert"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Denne pakken må oppgraderes\n"
-"Er du sikker på at du ikke vil velge denne?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke fjerne denne pakken. Den må oppgraderes"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installer"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Lagre på/hente fra diskett"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Oppdaterer pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal installasjon"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr "Velg pakkene du ønsker å installere"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr "Installerer"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Beregner"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tid som gjenstår "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr "Vennligst vent, forbereder installasjon"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Godta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-msgid "Refuse"
-msgstr "Nekte"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Bytt CD!\n"
-"\n"
-"Vennligst sett inn CD'en merket \"%s\" i stasjonen og trykk Ok når du er "
-"ferdig.\n"
-"Hvis du ikke har den trykk Avbryt for å unngå installasjon fra denne CD'en."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr "Fortsette uansett?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr "Det var en feil ved endring av pakkenes rekkefølge:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr "Det var en feil ved installering av pakkene:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "En feil oppsto"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Ønsker du virkelig å forlate installasjonen?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "License agreement"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Vennligst velg tastatur-oppsettet ditt."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette lista over tilgjengelige tastatur"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hvilken installasjonsklasse ønsker du?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installer/Oppdater"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Er dette en installering eller en oppdatering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Anbefalt"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Oppgrader"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Oppgrader kun pakker"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Vennligst velg din musetype."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port mus"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Vennligst velg hvilken serieport musen din koblet til."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulering knapper"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulering 2 knapper"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulering 3 knapper"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr "ingen tilgjengelige partisjoner"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partisjoner for å finne monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Velg monteringspunktene"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Jeg kan ikke lese partisjonstabellen din, den er for ødelagt for meg :(\n"
-"Jeg kan forsøke å blanke ut dårlige partisjoner (ALLE DATA vil gå tapt!)\n"
-"Den andre løsningen er å ikke la DrakX modifisere partisjonstabellen.\n"
-"(feilen er %s)\n"
-"\n"
-"Vil du miste alle partisjonene?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake klarte ikke å lese partisjonstabellen korrekt.\n"
-"Fortsett på eget ansvar!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plass for 1 MB bootstrap! Installasjonen vil fortsette, but for "
-"åboote systemet ditt, må du lage en bootstrap partisjon i DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen rotpartisjon funnet for oppgradering"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rotpartisjon"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Hva er rotpartisjonen (/) på ditt system?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Velg partisjonene du ønsker å partisjonere"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Sjekke fo rdårlige clustere?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formaterer partisjoner"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lager of formaterer fila %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Det er ikke nok SWAP til å fullføre installasjonen, vennligst legg til litt "
-"mer"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr "Søker etter tilgjengelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr "Finner pakker som skal oppgraderes"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Ditt system har ikke nok plass igjen for installasjon eller oppgradering (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vennligst velg lagre eller hente pakkevalg på diskett.\n"
-"Formatet er det samme som for auto_install genererte disketter."
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr "Hent fra diskett"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr "Henter fra disketten"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr "Pakkevalg"
-
-#: ../../install_steps_interactive.pm_.c:548
-msgid "Insert a floppy containing package selection"
-msgstr "Sett inn en diskett med pakkevalget"
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr "Lagre på diskett"
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr "Valgt størrelse er større enn tilgjengelig plass"
-
-#: ../../install_steps_interactive.pm_.c:641
-msgid "Type of install"
-msgstr "Type av installasjon"
-
-#: ../../install_steps_interactive.pm_.c:642
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har ikke valgt noen pakkegrupper.\n"
-"Vennligst velg den minimale installasjonen du ønsker:"
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr "Med X"
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr "Med grunnleggende dokumentasjon (anbefalt!)"
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Virkelig minimal installasjon (uten urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Hvis du har alle CDene i listen nedenfor, klikk Ok.\n"
-"Hvis du ikke har noen av disse CDene, klikk Avbryt.\n"
-"Hvis bare noen av CDene mangler, fjern disse, klikk så Ok."
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROMen ved navnet \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr "Forbereder installasjon"
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr "Konfigurasjon postinstallering"
-
-#: ../../install_steps_interactive.pm_.c:818
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sett inn en oppstartsdiskett i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:824
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sett inn oppdater moduler disketten i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har nå mulighet til å laste ned programvare for kryptering.\n"
-"\n"
-"ADVARSEL:\n"
-"\n"
-"Pga. forskjellige krav som er tillagt denne programvaren og pålagt av "
-"forskjellige\n"
-"myndigheter, bør kunde og/eller sluttbruker av denne programvaren forsikre "
-"seg\n"
-"om at lovene i sin/deres jurisdiksjon tillater han/dem å laste ned, ha i "
-"besittelse\n"
-"og/eller bruke denne programvaren.\n"
-"\n"
-"I tillegg skal kunde og/eller sluttbruker spesielt være oppmerksom på å ikke "
-"bryte\n"
-"lovene i sin/deres jurisdiksjon. Skulle kunde og/eller sluttbruker ikke\n"
-"respektere bestemmelsene av disse lovene, vil han/de pådra seg alvorlige\n"
-"sanksjoner.\n"
-"\n"
-"Under ingen omstendighet skal Mandrakesoft og eller ikke sine produsenter og/"
-"eller\n"
-"leverandører bli holdt ansvarlige for særskilte, indirekte eller tilfeldige\n"
-"skader uansett hva som enn skulle (inkludert, men ikke begrenset til tap av "
-"fortjeneste,\n"
-"forretningsavbrudd, tap av kommersiell data og andre pengemessige tap, og "
-"endelige\n"
-"ansvarsforhold og erstatninger som skal betales ifølge en rettslig\n"
-"avgjørelse) oppstå ut av bruk, besittelse, eller ene og alene nedlastingen\n"
-"av denne programvaren, som kunde og/eller sluttbruker til slutt kan ha\n"
-"tilgang til etter å ha sagt seg enig i og undertegnet fremviste avtale.\n"
-"\n"
-"For spørsmål angående denne avtalen, vennligst kontakt \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:883
-#, fuzzy
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Du har nå muligheten til å laste ned pakker som har blitt sluppet\n"
-"etter at distribusjonen ble sluppet.\n"
-"\n"
-"Du kan få sikkerhetsoppdateringer og bugfikser, men du trenger en\n"
-"internettoppkobling for å fortsette.\n"
-"\n"
-"Ønsker du å installere oppdateringene?"
-
-#: ../../install_steps_interactive.pm_.c:898
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Kontakter Mandrake Linux web-sted for å få en liste over tilgjengelige speil"
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr "Velg et speil som pakkene kan hentes fra"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontakter speilet for å få en liste over tilgjengelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr "Hva er din tidsone?"
-
-#: ../../install_steps_interactive.pm_.c:944
-msgid "Hardware clock set to GMT"
-msgstr "Maskinvareklokken din satt til GMT"
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hjelp av NTP)"
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr "NTP-tjener"
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Remote CUPS server"
-msgstr "Fjern-CUPS tjener"
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "No printer"
-msgstr "Ingen skriver"
-
-#: ../../install_steps_interactive.pm_.c:1004
-msgid "Do you have an ISA sound card?"
-msgstr "Har du et ISA lydkort?"
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Kjør \"sndconfig\" etter installasjonen for å konfigurere lydkortet ditt"
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Lydkort ikke oppdaget. Prøv \"harddrake\" etter installasjonen"
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Oppsummering"
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr "Tidssone"
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr "Skriver"
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr "ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr "Lydkort"
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr "Lokale filer"
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Sett root-passord"
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr "Intet passord"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Dette passordet er for enkelt (må være minst %d tegn langt)"
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikasjon"
-
-#: ../../install_steps_interactive.pm_.c:1098
-msgid "Authentication LDAP"
-msgstr "Autentisering LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr "LDAP grunnleggende dn"
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr "LDAP-tjener"
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr "Autentisering NIS"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr "NIS-domene"
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr "NIS-tjener"
-
-#: ../../install_steps_interactive.pm_.c:1143
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En egendefinert oppstartsdiskett er en måte å starte Linux-systemet på uten\n"
-"å være avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
-"ikke ønsker\n"
-"å installere SILO på systemet ditt, eller et annet operativsystem fjerner "
-"SILO,\n"
-"eller at SILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
-"oppstartsdiskett\n"
-"kan også brukes sammen med Mandrake's redningsbilde, som gjør det mye "
-"lettere gjenopprette\n"
-"etter systemsvikt.\n"
-"Hvis du ønsker du å opprette en oppstartsdiskett for systemet ditt, sett inn "
-"en diskett\n"
-"i den første stasjonen og trykk \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr "Første diskettstasjon"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr "Andre diskettstasjon"
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr "Dropp"
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"En egendefinert oppstartsdiskett er en måte å starte Linux-systemet på uten\n"
-"å være avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
-"ikke ønsker\n"
-"å installere LILO (eller grub) på systemet ditt, eller et annet "
-"operativsystem fjerner LILO,\n"
-"eller at LILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
-"oppstartsdiskett\n"
-"kan også brukes sammen med Mandrake's redningsbilde, som gjør det mye "
-"lettere gjenopprette\n"
-"etter systemsvikt. Ønsker du å opprette en oppstartsdiskett for systemet "
-"ditt?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ADVARSEL! Du bruker XFS på din rotpartisjon,\n"
-"det å lage en oppstartsdiskett på en 1,44 Mb diskett vil\n"
-"antageligvis ikke gå, dan XFS trenger en veldig stor driver)."
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr "Beklager, ingen diskettstasjon tilgjengelig"
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Velg diskettstasjonen du ønsker å bruke for å lage oppstartsdisketten"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sett inn en diskett i %s"
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr "Oppretter oppstartdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr "Klargjør oppstartslaster"
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Det virker som du har en OldWorld eller ukjent\n"
-"maskin, yaboot oppstartslasteren vil ikke virke for deg.\n"
-"Installasjonen vil fortsette, men du må\n"
-"bruke BootX for å starte din maskin."
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr "Ønsker du å bruke aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Feil ved installasjon av aboot, \n"
-"prøve å installere selv om det ødelegger den første partisjonen?"
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr "Installer oppstartslaster"
-
-#: ../../install_steps_interactive.pm_.c:1231
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasjon av oppstartslaster mislykket. Følgende feil oppsto:"
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du må muligens endre din Open Firmware oppstartsenhet for å\n"
-" slå på oppstartslasteren. Hvis du ikke ser oppstartslasteren ved\n"
-" omstart, hold nede Command-Option-O-F ved omstart og skriv:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv så: shut-down\n"
-"Ved din neste oppstart burde du se oppstartslasteren."
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sett inn en tom diskett i stasjon %s"
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr "Oppretter diskett for autoinstallasjon"
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Noen trinn er ikke fullført.\n"
-"\n"
-"Ønsker du virkelig å avslutte nå?"
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulerer, installasjonen er fullført.\n"
-"Fjern oppstartsmediet og trykk return for å starte på nytt.\n"
-"\n"
-"\n"
-"For informasjon om endringer som er tilgjengelige for denne utgaven av "
-"Mandrake Linux,\n"
-"sjekk errataen tilgjengelig fra:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informasjon om konfigurering av systemet ditt finnes i post\n"
-"install-kapittelet i Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid "Generate auto install floppy"
-msgstr "Oppretter diskett for autoinstallasjon"
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Autoinstallasjonen kan være fullstendig automatisk\n"
-"hvis du ønsker det. Den vil da ta over harddisken!!\n"
-"(dette er for å installere på en annen maskin)\n"
-"\n"
-"Du kanskje ønske å kjøre installasjonen omigjen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr "Automatisert"
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Replay"
-msgstr "Gjør igjen"
-
-#: ../../install_steps_interactive.pm_.c:1336
-msgid "Save packages selection"
-msgstr "Lagre pakkevalg"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installasjon %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellom elementer  | <Space> velger | <F12> neste skjerm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mangler"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "Konsollhjelper mangler"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Velg en fil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avansert"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Grunnleggende"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Vennligst vent"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dårlig valg, prøv igjen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ditt valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Innganger du må fylle:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ditt valg? (0/1, standard `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Valg: `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button?"
-msgstr "Ønsker du å klikke på denne knappen? "
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ditt valg? (standard `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Det er mange ting å velge fra (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vennlig velg det første nummeret av 10-range du ønsker å redigere,\n"
-"eller bare trykk Enter for å fortsette.\n"
-"Ditt valg? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Merk, et merke endret:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Re-submit"
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr "Tsjekkisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr "Tysk"
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr "Spansk"
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr "Finsk"
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr "Fransk"
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr "Norsk"
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr "Polsk"
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr "Russisk"
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr "Svensk"
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr "UK-tastatur"
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr "US-tastatur"
-
-#: ../../keyboard.pm_.c:211
-msgid "Albanian"
-msgstr "Albansk"
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskin)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr "Armensk (phonétic)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjansk (latin)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr "Belgisk"
-
-#: ../../keyboard.pm_.c:222
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarsk (phonetic)"
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarsk (BDS)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
-
-#: ../../keyboard.pm_.c:225
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr "Sveisisk (tysk oppsett)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr "Sveisisk (fransk oppsett)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr "Tsjekkisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen døde taster)"
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr "Dansk"
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norsk)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svensk)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr "Estlandsk"
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (\"Russisk\" oppsett)"
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (\"Latinsk\" oppsett)"
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr "Gresk"
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr "Ungarsk"
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr "Kroatisk"
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr "Israelsk"
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Phonetic)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Iranian"
-msgstr "Iransk"
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr "Islansk"
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr "Italiensk"
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
-
-#: ../../keyboard.pm_.c:254
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr "Latinamerikansk"
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr "Liauisk AZERTY (gammel)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liauisk AZERTY (ny)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"nummer-rekke\" QWERTY"
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"phonétic\" QWERTY"
-
-#: ../../keyboard.pm_.c:261
-msgid "Latvian"
-msgstr "Lotvisk"
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr "Makedonsk"
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr "Hollansk"
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (qwerty oppsett)"
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (qwertz oppsett)"
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr "Portugisisk"
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Quebec)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Romanian (qwertz)"
-msgstr "Romansk (qwertz)"
-
-#: ../../keyboard.pm_.c:271
-msgid "Romanian (qwerty)"
-msgstr "Romansk (qwerty)"
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr "Slovensk"
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:279
-msgid "Serbian (cyrillic)"
-msgstr "Serbisk (cyrillic)"
-
-#: ../../keyboard.pm_.c:281
-msgid "Tamil"
-msgstr "Tamilsk"
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr "Thai-tastatur"
-
-#: ../../keyboard.pm_.c:284
-msgid "Tajik keyboard"
-msgstr "Tajik-tastatur"
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (tradisjonell \"F\" modell)"
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" modell)"
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr "Ukrainsk"
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr "US-tastatur (internasjonal)"
-
-#: ../../keyboard.pm_.c:292
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"nummer-rekke\" QWERTY"
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavisk (latin)"
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr "Høyre Alt tast"
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr "Begge Shift taster samtidig"
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr "Control og Shift taster samtidig"
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr "CapsLock tast"
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl og Alt taster samtidig"
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift taster samtidig"
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr "\" Menu\" tast"
-
-#: ../../keyboard.pm_.c:308
-msgid "Left \"Windows\" key"
-msgstr "Venstre \"Windows\" tast"
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr "Høyre \"Windows\" tast"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Rund monterer %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske partisjoner først\n"
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA støtte eksisterer ikke lengre for 2.2 kjerner. Vennligst bruk en 2.4 "
-"kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - mus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generisk PS2 hjulmus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knapp"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generisk 2-knappers mus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generisk"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriell"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generisk 3-knappers mus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC-seriene (seriell)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM-seriene"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (seriell, gammel C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bussmus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knapper"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knapper"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ingen"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Vennligst test musen."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "For å aktivere musen,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEVEG HJULET DITT!"
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr "Avslutt"
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr "Neste ->"
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr "<- Forrige"
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr "Er dette riktig?"
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr "Utvid tre"
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr "Trekk sammen tre"
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellom flat og gruppesortert"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Koble opp mot Internett"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Den mest vanlige måten å koble opp med adsl er pppoe.\n"
-"Noen oppkoblinger bruker pptp, noen få bruker dhcp.\n"
-"Hvis du ikke vet, velg 'bruk pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "bruk dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "bruk pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "bruk pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hvilken dhcp klient ønsker du å bruke?\n"
-"Standard er dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt.\n"
-"Jeg kan ikke sette opp denne tilkoblingstypen."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-msgid "Choose the network interface"
-msgstr "Velg nettverksgrensesnitt"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vennligst velg hvilket nettverksadapter du ønsker å bruke til å koble opp\n"
-"mot Internett"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ingen nettverkskort funnet"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr "Konfigurerer nettverk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Vennligst entre vertsnavnet ditt hvis du vet det.\n"
-"Noen DHCP tjenere trenger vertsnavnet for å virke.\n"
-"Vertsnavnet ditt bør være et full-kvalifisert vertsnavn,\n"
-"som ``minboks.mittlab.mittfirma.no''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr "Vertsnavn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-msgid "Network Configuration Wizard"
-msgstr "Nettverkskonfigurasjonveiviser"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Hva slags type er ISDN-tilknytningen din?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hvilken ISDN konfigurering foretrekker du?\n"
-"\n"
-"* Den gamle konfigurasjoen bruker isdn4net. Det har kraftfulle\n"
-"  verktøy, den det er vanskelig å konfigurere for en nybegynner,\n"
-"  og er ikke standardbasert.\n"
-"\n"
-"' Det nye konfigurasjonsverktøyet er enklere å forstå,\n"
-"  mer standardisert, men med færre verktøy.\n"
-"\n"
-"Vi anbefaler den nye konfigurasjonen.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfigurasjon (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Gamle konfigurasjonen (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-konfigurasjon"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Velg din tilbyder.\n"
-" Hvis denne ikke er i listen, velg ikke i listen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europaprotokollen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europaprotokollen (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll for resten av verden"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Resten av verden \n"
-" ingen D-kanal (leid linje)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use?"
-msgstr "Hvilken protokoll ønsker du å bruke?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Hva slags kort har du?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Jeg vet ikke"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Hvis du har et ISA kort burde verdiene i neste bilde være riktige.\n"
-"\n"
-"Hvis du har et PCMCIA kort må du vite irq og io for kortet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Avbryt"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortsett"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card?"
-msgstr "Hvilket er ditt ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"Jeg har oppdaget et ISDN PCI-kort, men jeg vet ikke hviklet type. Vennligst "
-"velg et PCI-kort i neste skjermbilde."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort funnet. Vennligst velg et i neste skjermbilde."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opsjoner oppringt"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Navn tilknytning"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Scriptbasert"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalbasert"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domenenavn"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Første DNS-tjener (valgfri)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Andre DNS-tjener (valgfri)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koble ned eller rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Du er for øyeblikket koblet opp mot Internett"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koble opp mot Internett eller rekonfigurere tilkoblingen din."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Du er for øyeblikket ikke koblet opp mot Internett."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Koble til"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Koble fra"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfigurer tilkoblingen"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internett tilkobling & konfigurasjon"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nå konfigurere din  %s tilkobling."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal nå konfigurere %s oppkoblingen.\n"
-"\n"
-"\n"
-"Trykk OK for å begynne."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Fordi du holder på med en nettverksinstallasjon er ditt "
-"nettverksoppsettallerede konfigurert.\n"
-"Trykk OK for å beholde din eksisterende konfigurasjon, eller avbryt for å "
-"rekonfigurere din internett og nettverkskonfigurasjon.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til nettverkskonfigurasjon hjelperen\n"
-"\n"
-"Vi skal nå konfigurere din internett/nettverksoppkobling.\n"
-"Hvis du ikke ønsker å bruke automatisk oppdagelse, fjern krysset\n"
-"i boksen.\n"
-
-#: ../../network/netconnect.pm_.c:171
-msgid "Choose the profile to configure"
-msgstr "Velg profilen som skal konfigureres"
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr "Bruk automatisk detektering"
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr "Finner enheter..."
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "Normal modem connection"
-msgstr "Normal modemtilkobling"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, c-format
-msgid "detected on port %s"
-msgstr "oppdaget på port %s"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-msgid "ISDN connection"
-msgstr "ISDN-tilkobling"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr "oppdaget %s"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-msgid "ADSL connection"
-msgstr "ADSL oppkobling"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr "oppdaget på grensesnitt %s"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "Cable connection"
-msgstr "Kabeltilkobling"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "cable connection detected"
-msgstr "Kabeltilkobling detektert"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "LAN connection"
-msgstr "Lokalt nettverksoppkobling"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr "oppdaget ethernettkort"
-
-#: ../../network/netconnect.pm_.c:206
-msgid "Choose the connection you want to configure"
-msgstr "Velg oppkoblingen du ønsker å konfigurere"
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigureret flere måter å koble deg mot internett på.\n"
-"Venligst velg den du ønsker å bruker.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:231
-msgid "Internet connection"
-msgstr "Internett tilkobling"
-
-#: ../../network/netconnect.pm_.c:237
-msgid "Do you want to start the connection at boot?"
-msgstr "Ønsker du å starte tilkoblingen din ved oppstart?"
-
-#: ../../network/netconnect.pm_.c:251
-msgid "Network configuration"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr "Nettverket må startes på nytt"
-
-#: ../../network/netconnect.pm_.c:256
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Et problem oppsto ved omstart av nettverket: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulerer, internett og nettverkskonfigurasjonen er fullført.\n"
-"\n"
-"Konfigurasjonen vil nå bli aktivert.\n"
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Etter at det er ferding, anbefaler vi at du restarter X\n"
-"slik at du unngår problemer med at vertsnavnet forandres."
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Det oppsto problemer under konfigurasjon.\n"
-"Test tilkoblingen din via net_monitor eller mcc. Hvis tilkoblingen din ikke "
-"virker, ønsker du kanskje å kjøre konfigureringen på nytt"
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVARSEL: Denne enheten har tidligere blitt konfigurert til å koble opp mot "
-"Internett.\n"
-"Trykk OK for å beholde enhetens konfigurasjon.\n"
-"Modifisering av feltene nedenfor vil overskrive denne konfigurasjonen."
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Vennligst entre IP-konfigurasjonen for denne maskinen.\n"
-"Hvert element bør entres som en IP-adresse i punkt-desimal\n"
-"notasjon (f.eks, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer nettverksenhet %s"
-
-#: ../../network/network.pm_.c:309
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adresse"
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Nettmaske"
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr "Automatisk IP"
-
-#: ../../network/network.pm_.c:314
-#, fuzzy
-msgid "Start at boot"
-msgstr "Startet ved oppstart"
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adresse bør være i format 1.2.3.4"
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Vennligst entre vertsnavnet ditt.\n"
-"Vertsnavnet ditt bør være et full-kvalifisert vertsnavn,\n"
-"så som ``minboks.mittlab.mittfirma.no''.\n"
-"Du kan også entre IP-adressen til gateway'en hvis du har en"
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr "DNS-tjener"
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (f.eks. %s)"
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr "Gateway-enhet"
-
-#: ../../network/network.pm_.c:385
-msgid "Proxies configuration"
-msgstr "Konfigurasjon proxy"
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr "Spor id nettverkskort (nyttig for bærbare)"
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr "Proxy burde være http://..."
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr "Proxy burde være ftp://..."
-
-#: ../../network/tools.pm_.c:41
-msgid "Internet configuration"
-msgstr "Internett-konfigurasjon"
-
-#: ../../network/tools.pm_.c:42
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vil du prøve å koble opp mot Internett nå?"
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Tester tilkoblingen din..."
-
-#: ../../network/tools.pm_.c:56
-msgid "The system is now connected to Internet."
-msgstr "Systemet er nå koblet opp mot Internett."
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr "Av sikkerhetsgrunner vil den bli frakoblet nå."
-
-#: ../../network/tools.pm_.c:58
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Det ser ikke ut til at systemet er koblet til Internett.\n"
-"Prøv å rekonfigurere tilkoblingen din."
-
-#: ../../network/tools.pm_.c:82
-msgid "Connection Configuration"
-msgstr "Konfigurasjon tilknytning."
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr "Vennnligst fyll eller merk feltet under"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kort IRQ"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kort IO"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kort IO_0"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ditt telefonnummer"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Navn tilbyder (f.eks. tilbyder.net)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonnummer tilbyder"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Tilbyder dns 1 (valgfri)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Tilbyder dns 2 (valgfri)"
-
-#: ../../network/tools.pm_.c:95
-msgid "Choose your country"
-msgstr "Velg land"
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Oppringningsmodus"
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Oppkoblingshastighet"
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Oppkoblingens timout (i sekunder)"
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Logg inn (brukernavn)"
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Passord"
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montering mislykket: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Utvidet partisjon ikke støttet på denne plattformen"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Du har et hull i partisjonstabellen din, men jeg kan ikke bruke det.\n"
-"Den eneste løsningen er å flytte primærpartisjonene dine for å ha hullet ved "
-"siden av de utvidede partisjonene"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Gjenoppretting fra fil %s mislykket: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Feil ved skriving til fil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Noe som ikke er bra skjer med disken din. \n"
-"En test for å sjekke dataintegritet var mislykket. \n"
-"Dette betyr at å skrive noe til disken vil av og til ende opp som ubrukelig"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "må ha"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "viktig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "veldig bra"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bra"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "kanskje"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokal skriver"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Fjern-skriver"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Skriver på fjern-CUPS tjener"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-msgid "Printer on remote lpd server"
-msgstr "Skriver på fjern-lpd tjener"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Nettverksskriver (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Skriver på SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Skriver på en NetWare tjener"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-msgid "Enter a printer device URI"
-msgstr "Skriverenhetens URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Pipe inn i kommando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr "Ukjent modell"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale skrivere"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Fjern-skrivere"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " på parallelport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB skriver \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multifunksjonsenhet på parallelport \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multifunksjonsenhet på USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunksjonsenhet på HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multifunksjonsenhet"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", skriver til %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "på LPD tjener \"%s\", skriver \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP vert \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "på Windows tjener \"%s\", del \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "på Novell tjener \"%s\", skriver \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", bruker kommando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr "Rå skriver (ingen driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(på %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(på denne maskin)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "På CUPS tjener \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Velg skrivertilkobling"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvordan er skriveren tilkoblet?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Skrivere på fjern CUPS tjenere trenger du ikke å konfigurere her; disse "
-"skriverene vil bli oppdaget automatisk."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-msgid "CUPS configuration"
-msgstr "CUPS konfigurasjon"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-msgid "Specify CUPS server"
-msgstr "Spesifiser CUPS tjener"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"For å få tilgang til fjern CUPS-tjenere i ditt lokale nettverk trenger du "
-"ikke å konfigurere noen ting; CUPS-tjenerene informerer maskinen din "
-"automatisk om skriverene. Alle skriverene som før øyeblikket er kjent for "
-"maskinen din er listet i \"Remote printers\" seksjonen i hovedvinduet til "
-"Printerdrake. Når CUPS-tjeneren din ikke er i ditt lokale nettverk, må du "
-"entre CUPS-tjenerens IP-adresse og evnt. portnummeret for å få skriver- "
-"informasjon fra tjeneren, ellers la disse feltene være tomme."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalt er CUPS konfigurert automatisk ihht. til nettverksmiljøet ditt, så "
-"du kan ha tilgang til skrivere på CUPS-tjenerene i ditt lokale nettverk. "
-"Hvis dette ikke virker ordentlig, skru av \"Automatic CUPS configuration\" "
-"og rediger filen /etc/cups/cupsd.conf manuelt. Ikke glem å starte CUPS på "
-"nytt etterpå (kommando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adresse bør være i format 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr "Portnummer burde være numerisk"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS tjener IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatisk CUPS konfigurasjon"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test porter"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-msgid "Add a new printer"
-msgstr "Legg til en ny skriver"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Velkommen til Skriverveiviseren\n"
-"\n"
-"Denne veiviseren lar deg installere lokale eller fjernskrivere som kan bli "
-"brukt fra denne maskin, og også fra andre maskiner i nettverket.\n"
-"\n"
-"Den spør etter all nødvendig informasjon for å sette opp skriveren og gir "
-"deg tilgang til alle tilgjengelige skriverdrivere, drivervalg og skriver "
-"tilkoblinger."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokal skriver"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Velkommen til skriverveiviseren\n"
-"\n"
-"Den veiviseren vil la deg installere din(e) skriver(e) som er tilkoblet "
-"denne maskin.\n"
-"\n"
-"Vennligt koble skriveren(e) til maskinen og skru dem på. Klikk på \"neste\" "
-"når du er klar, og på \"avbryt\" hvis du ikke ønsker å sette opp skrivere "
-"nå.\n"
-"\n"
-"Merk at noen datamaskiner kan kræsje under skriver autooppdating, skru av "
-"\"autodetekter skrivere\" for å installere skrivere uten autodetektering. "
-"Bruk \"ekspertmodus\" til printerdrake når du ønsker å sette opp utskrift på "
-"en fjernskriver og printerdrake ikke lister den automatisk."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Finn skrivere automatisk"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Gratulerer, din skriver er nå installert og konfigurert!\n"
-"\n"
-"Du kan skrive ut med \"Skriv ut\" kommandoen til ditt program (vanligvis i "
-"\"Fil\" menyen).\n"
-"\n"
-"Hvis du ønsker å legge til, fjerne, eller gi en skriver ett nytt navn, eller "
-"vis du ønsker å gjøre om standard valg (papir, utskriftkvalitet, .....), "
-"velg \"Skriver\" i \"Hardware\" delen av Mandrake Control Center."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatisk detektering av skrivere"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Utfør automatisk detektering"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Sett opp skriver manuellt"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Oppdaget %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Skriver på parallelport \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB skriver \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ingen lokal skriver funnet! For manuelt å installere en skriver entre et "
-"enhets-navn/filnavn i input-linjen (Parallelporter: /dev/lp0, /dev/lp1, ..., "
-"lik LPT1:, LPT2:, ..., 1st USB skriver: /dev/usb/lp0, 2nd USB skriver: /dev/"
-"usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Du må legge til en enhet eller et filnavn!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Ingen lokal skriver funnet!\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Nettverksskrivere kan bare installeres etter installasjonen. Velg \"Hardware"
-"\" og så \"Printer\" i Mandrake Control Center."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Vennligst velg en port hvor skriveren din er tilkoblet eller entre en enhet "
-"navn/filnavn i input-linjen"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Vennligst velg porten hvor skriveren din er koblet til."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallelporter: /dev/lp0, /dev/lp1, ..., lik LPT1:, LPT2:, ..., 1st USB "
-"skriver: /dev/usb/lp0, 2nd USB skriver: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Du må velge/entre en skriver/enhet!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuell konfigurasjon"
-
-#: ../../printerdrake.pm_.c:467
-#, fuzzy
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-"Er skriveren din en multifunksjonsenhet fra HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 med skanner)?"
-
-#: ../../printerdrake.pm_.c:484
-msgid "Installing HPOJ package..."
-msgstr "Installerer HPOJ pakke..."
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr "Sjekker enhet og konfigurer HPOJ ..."
-
-#: ../../printerdrake.pm_.c:507
-msgid "Installing SANE package..."
-msgstr "Installerer SANE pakke..."
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr "Skanner på din HP multifunksjonsenhet"
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr "Gjør skriverport tilgjengelig for CUPS ..."
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr "Leser skriverdatabase  ..."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr "Opsjoner for fjern-lpd skriver"
-
-#: ../../printerdrake.pm_.c:627
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"For å bruke en fjern-lpd skriverkø, må du oppgi vertsnavnet til skriver- "
-"tjeneren og skrivernavnet på denne tjeneren."
-
-#: ../../printerdrake.pm_.c:628
-msgid "Remote host name"
-msgstr "Fjern-vertsnavn"
-
-#: ../../printerdrake.pm_.c:629
-msgid "Remote printer name"
-msgstr "Fjern-skrivers navn"
-
-#: ../../printerdrake.pm_.c:632
-msgid "Remote host name missing!"
-msgstr "Det eksterne vertsnavnet mangler!"
-
-#: ../../printerdrake.pm_.c:636
-msgid "Remote printer name missing!"
-msgstr "Det eksterne vertsnavnet mangler!"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opsjoner for SMB (Windows 9x/NT) skriver"
-
-#: ../../printerdrake.pm_.c:705
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"For å skrive til en SMB-skriver, må du oppgi SMB-vertsnavnet (Merk! Dette "
-"kan være forskjellig fra dens TCP/IP-vertsnavn!) og muligens IP-adressen til "
-"skrivertjeneren, så vel som det delte navnet til skriveren du ønsker tilgang "
-"til og anvendelige brukernavn, passord og arbeidsgruppeinformasjon."
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr "SMB-tjener vert"
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr "SMB-tjener IP"
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr "Navn deling"
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr "Arbeidsgruppe"
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Servernavnet eller serverens IP må oppgis!"
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr "Samba delenavn mangler!"
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr "NetWare skriveropsjoner"
-
-#: ../../printerdrake.pm_.c:804
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"For å skrive til en NetWare-skriver, må du oppgi navnet til NetWare-"
-"skrivertjeneren (Mer! Dette kan være forskjellig fra dens TCP/IP-vertsnavn!) "
-"så vel som navnet på skriverkøen til skriveren du ønsker adgang til og "
-"anvendelige brukernavn og passord."
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr "Skrivertjener"
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr "Skriverkø-navn"
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr "NCP servernavn mangler!"
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr "NCP kønavn mangler!"
-
-#: ../../printerdrake.pm_.c:854
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket skrivervalg"
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"For å skrive til en TCP eller socket skriver, må du oppgi vertsnavnet til "
-"skriveren, og eventuelt portnummeret. På HP JetDirect tjenere er "
-"portnummeret vanligvis 9100, på andre tjenere kan dette variere. Sjekk "
-"manualen til maskinvaren din."
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr "Skriverens vertsnavn"
-
-#: ../../printerdrake.pm_.c:860
-msgid "Printer host name missing!"
-msgstr "Skriverens vertsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-msgid "Printer Device URI"
-msgstr "Skriverenhet URI"
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte oppgi URI til skriveren. URIen må være i henhold til enten "
-"CUPS eller Foomatic standarden. Ikke alle typer URIer støttes av "
-"købehandlerene."
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI må oppgis!"
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Alle skrivere trenger ett navn (f.eks. \"skriver\"). Beskrivelsen og "
-"lokalisasjonsfeltene trenger ikke å fylles inn. De er brukerkommentarer."
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr "Navn på skriver"
-
-#: ../../printerdrake.pm_.c:1008
-msgid "Description"
-msgstr "Beskrivelse"
-
-#: ../../printerdrake.pm_.c:1009
-msgid "Location"
-msgstr "Lokasjon"
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr "Forbereder skriverdatabase ..."
-
-#: ../../printerdrake.pm_.c:1114
-msgid "Your printer model"
-msgstr "Din skrivermodell"
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake har sammenlignet modellnavnet fra autooppdaging av skriveremed "
-"modellene oppgitt i skriverdatabasen for å finne beste match. match. Dette "
-"valget kan være feil, spesielt hvis skriveren din ikke er oppgitt i det hele "
-"tatt i databasen. Sjekk om valget er riktig og klikk \"Modellen er riktig\" "
-"hvis den er det eller hvis ikke, klikk \"Velg modell manuellt\" så du kan "
-"velge skrivermodellen din manuellt i neste skjerm.\n"
-"\n"
-"Printerdrake har for skriveren din funnet:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-msgid "The model is correct"
-msgstr "Modellen er riktig"
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-msgid "Select model manually"
-msgstr "Velg modell manuellt"
-
-#: ../../printerdrake.pm_.c:1141
-msgid "Printer model selection"
-msgstr "Skrivervalg"
-
-#: ../../printerdrake.pm_.c:1142
-msgid "Which printer model do you have?"
-msgstr "Hva slags type skriver har du?"
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Sjekk om Printerdrake gjorde autooppdagelsen av din skrivermodell riktig. "
-"Søk korrekt modell i listen når pekeren står over en feil modell eller på "
-"\"Rå skriver\"."
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Hvis din skriver ikke finnes i listen velg en kompatibel (se i "
-"skrivermanualen) eller en lignende."
-
-#: ../../printerdrake.pm_.c:1222
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter konfigurasjon"
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Du konfigurerer en OKI laser winprinter. Disse skriverene bruker en veldig\n"
-"spesiell kommunikasjonsprotokoll og virker derfor bare når de er koblet "
-"tilden første parallelporten. Når skriveren er koblet til en annen port "
-"eller til en skrivertjenerboks koble skriveren til den første parallelporten "
-"før du skriver en testside. Ellers vil ikke skriveren virke. Innstillinger "
-"for oppkoblingstype vil bli ignorert av driveren."
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfigurasjon"
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet skriverdrivere fra Lexmark støtter bare lokale skrivere, ingen "
-"skrivere på fjernmaskiner eller skrivertjenerbokser. Koble skriveren til en "
-"lokal port eller konfigurer den på maskinen hvor det er koblet til."
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"For å kunne skrive med din Lexmark inkjet og denne konfigurasjonen, trenger "
-"du inkjet skriverdriverene fra Lexmark (http://www.lexmark.com/). Gå til US "
-"web-stedet og klikk på \"Drivers\" knappen. Velg så din modell og etterpå "
-"\"Linux\" som operativsystem. Driveren kommer som RPM-pakker eller skall- "
-"skript med interaktiv grafisk installasjon. Du trenger ikke å gjøre denne "
-"konfigurasjonen fra det grafiske grensesnittet. Abryt direkte etter license "
-"agreement. Skriv så skriverhode alignment sider med \"lexmarkmaintain\" og "
-"juster hode alignment innstillinger med dette programmet."
-
-#: ../../printerdrake.pm_.c:1510
-#, fuzzy
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standardskriverens instillinger\n"
-"Du bør sjekke at sidestørrelsen og blekktypen\n"
-"er satt riktig. Merk deg at veldig god utskriftskvalitet\n"
-"kan gjøre utskriften treg."
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s må være ett helt tall!"
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s må være ett tall!"
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er utenfor rekkevidden!"
-
-#: ../../printerdrake.pm_.c:1567
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ønsker du å sette denne skriveren (\"%s\")\n"
-"som standard skriver?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Test pages"
-msgstr "Testsider"
-
-#: ../../printerdrake.pm_.c:1585
-#, fuzzy
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vennligst velg testsidene du ønsker å skrive ut.\n"
-"Merk deg, fototestsiden kan ta lang tid å skrive ut,\n"
-"og på laserskrivere med for lite minne vil den ikke\n"
-"skrives ut i det hele tatt. Som regel vil det holde å\n"
-"skrive ut standard testside."
-
-#: ../../printerdrake.pm_.c:1589
-msgid "No test pages"
-msgstr "Ingen testsider"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Print"
-msgstr "Skriv ut"
-
-#: ../../printerdrake.pm_.c:1592
-msgid "Standard test page"
-msgstr "Standard testside"
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
-
-#: ../../printerdrake.pm_.c:1600
-msgid "Photo test page"
-msgstr "Fototestside"
-
-#: ../../printerdrake.pm_.c:1604
-msgid "Do not print any test page"
-msgstr "Ikke skriv ut noen testside"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr "Skriver ut testside(r)..."
-
-#: ../../printerdrake.pm_.c:1637
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
-"Det kan ta litt tid før skriveren starter.\n"
-"Utskriftstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1641
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
-"Det kan ta litt tid før skriveren starter.\n"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr "Virker det som det skal?"
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-msgid "Raw printer"
-msgstr "Rå skriver"
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Får å få en liste over tilgjengelige valg for nåværende skriver klikk på "
-"\"Print option list\" knappen."
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Får å skrive ut en fil fra kommandolinjen (terminalvindu) bruk kommandoen \"%"
-"s <file>\" eller \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-msgid "Close"
-msgstr "Lukk"
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Skriver ut/Skanner på \"%s\""
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Skriver ut på skriver \"%s\""
-
-#: ../../printerdrake.pm_.c:1746
-msgid "Print option list"
-msgstr "Skriv ut liste over valg"
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-msgid "Transfer printer configuration"
-msgstr "Overfør skriverkonfigurasjon"
-
-#: ../../printerdrake.pm_.c:1818
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiere skriverkonfigurasjonen du har satt opp for køtjeneren\n"
-"%s til %s, din nåværende køtjener. All konfigurasjonsdata (skrivernavn,\n"
-"beskrivelse, tilkoblingstype og standardinstillinger) blir overtatt, men \n"
-"ikke jobber.\n"
-"Ikke alle køer kan overføres grunnet:\n"
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS støtter ikke skrivere på Novelltjenere eller skrivere som sender "
-"dataene inn i en fritt formet kommando.\n"
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ støtter bare lokale skrivere, fjern-LPD skrivere, og Socket/TCP "
-"skrivere.\n"
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng støtter ikke IPP skrivere.\n"
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"I tillegg, køer laget med dette programmet eller \"foomatic -configure\" kan "
-"ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Skrivere konfigurert med PPD filene som produsenten har laget eller med CUPS "
-"drivere ikke ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Velg skriverene som du vil overflytte og klikk\n"
-"\"Overfør\"."
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr "Ikke overfør skrivere"
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr "Overfør"
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En skriver med navnet \"%s\" eksisterer allerede på %s. \n"
-"Klikk \"Overfør\" for å overskrive.\n"
-"Du kan også gi ett nytt skrivernavn, eller hoppe over denne skriveren."
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Skrivernavn bør inneholde kun bokstaver, tall og understrek"
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Skriveren \"%s\" eksisterer allerede,\n"
-"ønsker du å overskrive dens konfigurasjon?"
-
-#: ../../printerdrake.pm_.c:1867
-msgid "New printer name"
-msgstr "Nytt skrivernavn"
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr "Overfører %s ..."
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr "Frisker opp skriverdata ..."
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-msgid "Configuration of a remote printer"
-msgstr "Konfigurasjon av en fjernskriver"
-
-#: ../../printerdrake.pm_.c:1899
-msgid "Starting network..."
-msgstr "Starter nettverk ..."
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-msgid "Configure the network now"
-msgstr "Konfigurer nettverket nå"
-
-#: ../../printerdrake.pm_.c:1934
-msgid "Network functionality not configured"
-msgstr "Nettverksfunksjonalitet ikke konfigurert"
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1938
-msgid "Go on without configuring the network"
-msgstr "Fortsett uten å konfigurere nettverket"
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1982
-msgid "Restarting printing system..."
-msgstr "Starter skriversystemet på nytt ..."
-
-#: ../../printerdrake.pm_.c:2020
-msgid "high"
-msgstr "høy"
-
-#: ../../printerdrake.pm_.c:2020
-msgid "paranoid"
-msgstr "paranoid"
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et utskriftsystem på %s sikkerhetsnivået"
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr "Starter utskriftsystemet ved oppstart"
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr "Sjekker installert programvare..."
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr "Fjerner LPRng..."
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr "Fjerner LPD..."
-
-#: ../../printerdrake.pm_.c:2208
-msgid "Select Printer Spooler"
-msgstr "Velg skrivertkøbehandler"
-
-#: ../../printerdrake.pm_.c:2209
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket utskriftsystem (spooler) ønsker du å bruke?"
-
-#: ../../printerdrake.pm_.c:2242
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigurerer skriver \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2255
-msgid "Installing Foomatic..."
-msgstr "Installerer Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr "Opsjoner for skriver"
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr "Klargjører PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-msgid "Configuring applications..."
-msgstr "Konfigurerer applikasjoner..."
-
-#: ../../printerdrake.pm_.c:2358
-msgid "Would you like to configure printing?"
-msgstr "Ønsker du å konfigurere en skriver?"
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr "Utskriftssystem: "
-
-#: ../../printerdrake.pm_.c:2418
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2422
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Her er følgende skriverkø.\n"
-"Du kan legge til flere eller endre de eksisterende."
-
-#: ../../printerdrake.pm_.c:2423
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Her er følgende skriverkø.\n"
-"Du kan legge til flere eller endre de eksisterende."
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Frisker opp skriverliste (for å vise alle tilgjengelige CUPS skrivere)"
-
-#: ../../printerdrake.pm_.c:2467
-msgid "Change the printing system"
-msgstr "Endrer utskriftssystemet"
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalt modus"
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-msgid "Do you want to configure another printer?"
-msgstr "Ønsker du å konfigurere enda en skriver?"
-
-#: ../../printerdrake.pm_.c:2714
-msgid "Modify printer configuration"
-msgstr "Modifiser skriverkonfigurasjon"
-
-#: ../../printerdrake.pm_.c:2716
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Skriver %s\n"
-"Hva ønsker du å forandre på denne skriveren?"
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr "Gjør det!"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-msgid "Printer connection type"
-msgstr "Skrivertilkoblingstype"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-msgid "Printer name, description, location"
-msgstr "Skrivernavn, beskrivelse, sted"
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr "Skriverprodusent, modell, driver"
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr "Skriverprodusent, modell"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr "Sett denne skriveren som standard"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Legg denne skriveren til Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Fjern denne skriveren fra Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-msgid "Print test pages"
-msgstr "Skriver ut testsider"
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-msgid "Know how to use this printer"
-msgstr "Vet hvordan man skal bruke denne skriveren"
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-msgid "Remove printer"
-msgstr "Fjern skriver"
-
-#: ../../printerdrake.pm_.c:2789
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Fjerner gammel skriver \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2813
-msgid "Default printer"
-msgstr "Standardskriver"
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Skriveren \"%s\" er nå satt til standard skriver."
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Legger skriver til Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Skriveren \"%s\" ble vellykket lagt til Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2839
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ønsker du virkelig å fjerne skriveren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2841
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Fjerner skriver \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-konfigurasjon"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Velkommen til proxy-konfigurasjonsverktøyet.\n"
-"\n"
-"Her kan du sette opp dine http og ftp proxier\n"
-"med eller uten brukernavn og passord\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Vennligst fill ut med http proxy informasjon\n"
-"La feltet være hvis du ikke ønsker en http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URLen bør begynne med \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Portnummer burde være numerisk"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Vennligst fyll ut ftp-proxy informasjonen-nLa feltet være hvis du ikke "
-"ønsker en ftp-proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URLen bør begynne med \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Vennligst skriv inn proxy brukernavn og passord, hvis det eksisterer.\n"
-"La det være hvis du ikke ønsker brukernavn/passord"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "brukernavn"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "passord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "skriv inn passord på nytt"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Passordene stemmer ikke overens. Prøv igjen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke legge til en partisjon til _formattert_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan ikke skrive fil %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid mislykket"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid mislykket (kanskje raidtool mangler?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partisjoner for RAID nivå %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystem"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron en periodisk kommandoplanlegger."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd blir brukt til overvåkning av batteristatus og logging av dette via "
-"syslog.\n"
-"Kan også brukes til å slå av maskinen når batteriet er dårlig."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Kjører kommandoer planlagt av at kommandoen ved tidspunkt spesifisert når\n"
-"at ble kjørt, og kjører batch kommandoer når lastingsmengden er lav nok."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX-program som kjører brukerspesifiserte programmer\n"
-"ved periodisk planlagte tider. vixie cron gir flere funksjoner til vanlig "
-"UNIX cron,\n"
-"inkludert bedre sikkerhet og mere kraftfulle konfigurasjonsopsjoner."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM gir musestøtte til tekstbaserte Linux applikasjoner som\n"
-"Midnight Commander. Den lar også musebaserte konsoller foreta klipp-og-lim "
-"operasjoner,\n"
-"og inkluderer støtte for pop-up menyer i konsollen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake kjører et maskinvaresøk, og kan konfigurere ny/endret\n"
-"maskinvare."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache er en World Wide Web tjener. Den blir brukt til å tjene HTML-filer\n"
-"og CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internett supertjenerdaemonen (vanligvis kalt inetd) starter\n"
-"varierende Internett-tjenester ettersom det trengs. Den er ansvarlig for å "
-"starte\n"
-"mange tjenester, inkludert telnet, ftp, rsh, og rlogin. Stopping av inetd "
-"stopper\n"
-"alle tjenestene den er ansvarlig for."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kjerne 2.2 serien for å sette\n"
-"opp en brannmur for å beskytte maskinen din fra nettverksangrep."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakken laster det valgte tastaturkartet som er satt i\n"
-"/etc/sysconfig/keyboard. Dette kan bli valgt ved bruk av kbdconfig "
-"verktøyet.\n"
-"For de fleste maskiner bør dette være aktivert."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering av kjernehode i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk oppdagelse og konfigurering av maskinvare ved oppstart."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf vil noen ganger arrangere utførelse av forskjellige\n"
-"oppgaver ved oppstart for å vedlikeholde systemkonfigurasjon."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er skriverdaemonen som behøves for at lpr skal virke ordentlig. Den er\n"
-"i hovedsak en tjener som fordeler utskriftsjobber til skriveren(e)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, brukt for å bygge en tjener med høy ytelse og\n"
-"tilgjengelighet."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) er en Domain Name Server (DNS) som brukes til å bestemme "
-"vertsnavn til IP-adresser."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og demonterer alle Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), og NCP (NetWare) monteringspunkter."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle nettverksgrensesnitt konfigurert til å starte\n"
-"ved oppstart."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en populær protokoll for fildeling over TCP/IP nettverk.\n"
-"Denne tjenesten tilbyr NFS-tjener funksjonalitet som er konfigurert via\n"
-"/etc/exports filen."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en populær protokoll for fildeling over TCP/IP nettverk.\n"
-"Denne tjenesten tilbyr NFS fillåsing funksjonalitet."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Slår automatisk på numlock-tast i konsoll og XFree ved\n"
-"oppstart."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Støtter OKI 4w og kompatible winskrivere."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA støtte er vanligvis støtte for ting som ethernet og\n"
-"modem i bærbare PC'er. Den vil ikke starte uten konfigurasjon så det er "
-"trygt\n"
-"å ha denne installert på maskiner som ikke trenger det."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper håndterer RPC-tilknytninger, som brukes av protokoller\n"
-"som NFS og NIS. Portmap-tjeneren må kjøres på maskiner som brukes som\n"
-"tjenere for protokoller som bruker RPC-mekanismen."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix er en posttransporteringsagent, som er et program som flytter post "
-"fra en maskin til en annen."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Lagrer og gjenoppretter system entropy pool for høyere kvalitet på\n"
-"tilfeldig nummergenerering."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilordne rå enheter til blokkenheter (som harddisk-\n"
-"partisjoner) for bruk av applikasjoner som Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Den rutete daemonen tillater automatisk oppdatering av IP rutertabell via\n"
-"RIP-protokollen. Mens RIP er mye brukt på små nettverk, trengs mere "
-"komplekse\n"
-"rutingprotokoller for komplekse nettverk."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen lar brukere på et nettverk finne ytelses-\n"
-"metrikser for alle maskinene på nettverket."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen lar brukere på et nettverk identifisere hvem som\n"
-"er logget inn på andre maskiner."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokollen lar fjernbrukere motta en liste over alle brukerne\n"
-"som er logget på en maskin som kjører rwho-daemonen (lik finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet på maskinen din"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog er en fasilitet som mange daemoner bruker til å logge beskjeder\n"
-"til forskjellige systemloggfiler. Det er en god ide å alltid kjøre syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Last driverene for dine usb enheter."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Starter X-font tjeneren (dette er obligatorisk for at XFree skal kjøre)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Velg hvilke tjenester som skal startes automatisk ved oppstart"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Skriver ut"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internett"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fildeling"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Fjernadministrasjon"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databasetjener"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktivert for %d registrert"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Tjenester"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "kjører"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppet"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjenester og daemoner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ingen tilleggsinformasjon\n"
-"om denne tjenesten, begklager."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ved oppstart"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stopp"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Takk for at du valgte Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Velkommen til åpen kilde verdenen"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokoll for resten av verden"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internett og beskjeder"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia og grafikk"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Utvikling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake kontrollpanel"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Brukergrensesnitt"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Tjenerprogramvare"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spill"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installerer pakke..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Jeg kan ikke lese partisjonstabellen din, den er for ødelagt for meg :(\n"
-"Jeg vil førsøke å blanke ut dårlige partisjoner"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Feil!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finne filen '%s' som jeg trenger."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Autoinstallasjonskonfigurering"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du holder på med å konfigurere en automatisk installasjonsdiskett. Denne "
-"muligheten erlitt farlig, og må brukes forsiktig.\n"
-"\n"
-"Med denne muligeten vil du kunne kjøre installasjonen du gjennomførte på "
-"denne maskinenpå nytt, med muligheten for å selv kunne forandre på noen av "
-"instillingene.\n"
-"\n"
-"For maksimal sikkerhet vil partisjoneringen og formateringen aldri bli "
-"gjennomført automatisk, uansett hva du valgte under installasjonen.\n"
-"\n"
-"Ønsker du å fortsette?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Konfigurasjon av automatiske skritt"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vennligst velg for hvert steg om det skal være som under installasjonen, "
-"eller manuelt"
-
-#: ../../standalone/drakautoinst_.c:83
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "Oppretter diskett for autoinstallasjon"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulerer!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten har blitt generert.\n"
-"Du kan nå gjennomføre installasjonen på nytt."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Autoinstallering"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Legg til en enhet"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Fjern siste enhet"
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:604
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:655
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:676
-#, fuzzy
-msgid " Error during mail sending. \n"
-msgstr "Feil ved lesing av fil %s"
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-#, fuzzy
-msgid "File Selection"
-msgstr "Pakkevalg"
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:782
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:801
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Vennligst velg pakkene du ønsker å installere."
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Fjern inngang"
-
-#: ../../standalone/drakbackup_.c:889
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:928
-#, fuzzy
-msgid "Users"
-msgstr "Brukernavn"
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:957
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Vennligst test musen."
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Vennligst prøv igjen"
-
-#: ../../standalone/drakbackup_.c:972
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Vennligst prøv igjen"
-
-#: ../../standalone/drakbackup_.c:978
-#, fuzzy
-msgid "Remember this password"
-msgstr "skriv inn passord på nytt"
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Lokalt nettverksoppkobling"
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Velg skrivertilkobling"
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Vennligst velg tastatur-oppsettet ditt."
-
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Vennligst klikk på en partisjon"
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1096
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Vennligst velg pakkene du ønsker å installere."
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1143
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Vennligst test musen."
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:1257
-#, fuzzy
-msgid "Network"
-msgstr "Nettverksgrensesnitt"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1302
-#, fuzzy
-msgid "Use daemon"
-msgstr "Brukernavn"
-
-#: ../../standalone/drakbackup_.c:1307
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Vennligst velg pakkene du ønsker å installere."
-
-#: ../../standalone/drakbackup_.c:1313
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Vennligst velg språk som skal brukes."
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Oppdaging av harddisk"
-
-#: ../../standalone/drakbackup_.c:1319
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Brukernavn"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1406
-#, fuzzy
-msgid "Where"
-msgstr "Hjul"
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "When"
-msgstr "Hjul"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "More Options"
-msgstr "Modulopsjoner:"
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../standalone/drakbackup_.c:1453
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Vennligst velg pakkene du ønsker å installere."
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1530
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Vennligst velg pakkene du ønsker å installere."
-
-#: ../../standalone/drakbackup_.c:1531
-#, fuzzy
-msgid "Backup system"
-msgstr "Oppsett filsystemer"
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Valg"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1745
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1776
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1876
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1962
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:1964
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Vennligst velg din musetype."
-
-#: ../../standalone/drakbackup_.c:1992
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2073
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2133
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Vennligst velg din musetype."
-
-#: ../../standalone/drakbackup_.c:2135
-#, fuzzy
-msgid "Other Media"
-msgstr "Andre"
-
-#: ../../standalone/drakbackup_.c:2141
-#, fuzzy
-msgid "Restore system"
-msgstr "Installer systemet"
-
-#: ../../standalone/drakbackup_.c:2142
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2215
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Skreddersydd"
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr "Hjelp"
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr "Forrige"
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status"
-
-#: ../../standalone/drakbackup_.c:2307
-#, fuzzy
-msgid "Build Backup"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-#, fuzzy
-msgid "Restore"
-msgstr "Skreddersydd"
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr "Neste"
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2512
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Velg pakker for installering"
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2563
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Vennligst velg språk som skal brukes."
-
-#: ../../standalone/drakbackup_.c:2584
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Vennligst velg språk som skal brukes."
-
-#: ../../standalone/drakbackup_.c:2606
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Vennligst velg språk som skal brukes."
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2729
-#, fuzzy
-msgid "Backup system files"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2731
-#, fuzzy
-msgid "Backup user files"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2733
-#, fuzzy
-msgid "Backup other files"
-msgstr "Dårlig sikkerhetskopi-fil"
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2761
-#, fuzzy
-msgid "Sending files..."
-msgstr "Finner enheter..."
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2889
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Vennligst test musen."
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2913
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Vennligst velg pakkene du ønsker å installere."
-
-#: ../../standalone/drakbackup_.c:2979
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Nettverkskonfigurasjon"
-
-#: ../../standalone/drakbackup_.c:3010
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/drakbackup_.c:3014
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/drakbackup_.c:3018
-#, fuzzy
-msgid "Backup Now"
-msgstr "Oppsett filsystemer"
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installasjon av %s mislykket. Følgende feil oppsto:"
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr "bruk: drakfloppy\n"
-
-#: ../../standalone/drakfloppy_.c:68
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Module name"
-msgstr "Modulnavn"
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Size"
-msgstr "Størrelse"
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-msgid "drakfloppy"
-msgstr "drakoppstartsdiskett"
-
-#: ../../standalone/drakfloppy_.c:91
-msgid "boot disk creation"
-msgstr "Lage oppstartsdiskett(er)"
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr "standard"
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr "Feil: DrakFloppy: %s"
-
-#: ../../standalone/drakfloppy_.c:126
-msgid "kernel version"
-msgstr "kernel versjon"
-
-#: ../../standalone/drakfloppy_.c:132
-msgid "General"
-msgstr "Generelt"
-
-#: ../../standalone/drakfloppy_.c:137
-msgid "Expert Area"
-msgstr "Ekspert område"
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd valgfrie argumenter"
-
-#: ../../standalone/drakfloppy_.c:141
-msgid "Add a module"
-msgstr "Legg til en modul"
-
-#: ../../standalone/drakfloppy_.c:161
-msgid "force"
-msgstr "tving"
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr "hvis det behøves"
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr "utelat scsi moduler"
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr "utelat raid moduler"
-
-#: ../../standalone/drakfloppy_.c:200
-msgid "Remove a module"
-msgstr "Fjern en modul"
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr "Utdata"
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr "Opprett disken"
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Vær sikker på at det er media i %s"
-
-#: ../../standalone/drakfloppy_.c:427
-#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Det er ikke noe media i %s\n"
-"Vennligst sett inn ett."
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Kan ikke dele %s"
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"Kan ikke stenge mkbootdisk skikkelig:\n"
-"%s \n"
-"%s"
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:254
-#, fuzzy
-msgid "no fonts found"
-msgstr "ingen nettverkskort funnet"
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-#, fuzzy
-msgid "done"
-msgstr "Ferdig"
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:351
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formater diskett"
-
-#: ../../standalone/drakfont_.c:354
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Forbereder installasjon"
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:470
-#, fuzzy
-msgid "xfs restart"
-msgstr "begrense"
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:551
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formater partisjoner"
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:571
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/drakfont_.c:573
-#, fuzzy
-msgid "Font List"
-msgstr "Monteringspunkt"
-
-#: ../../standalone/drakfont_.c:740
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Velg partisjonene du ønsker å partisjonere"
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:748
-#, fuzzy
-msgid "StarOffice"
-msgstr "Office"
-
-#: ../../standalone/drakfont_.c:752
-#, fuzzy
-msgid "Abiword"
-msgstr "Avbryt"
-
-#: ../../standalone/drakfont_.c:756
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Skriver"
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:829
-#, fuzzy
-msgid "Install List"
-msgstr "Installer systemet"
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-#, fuzzy
-msgid "Selected All"
-msgstr "Velg fil"
-
-#: ../../standalone/drakfont_.c:898
-#, fuzzy
-msgid "Remove List"
-msgstr "Fjern skriver"
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-#, fuzzy
-msgid "Initials tests"
-msgstr "Initmelding"
-
-#: ../../standalone/drakfont_.c:916
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Ikke noe nettverksadapter i systemet ditt!"
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:918
-#, fuzzy
-msgid "Post Install"
-msgstr "Installer"
-
-#: ../../standalone/drakfont_.c:936
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Ikke noe nettverksadapter i systemet ditt!"
-
-#: ../../standalone/drakfont_.c:937
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Avslutt installering"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-msgid "Internet Connection Sharing"
-msgstr "Deling av Internett tilkobling"
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling av Internett tilkobling er slått på"
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
-"Dette er for øyeblikket slått på.\n"
-"\n"
-"Hva vil du gjøre?"
-
-#: ../../standalone/drakgw_.c:139
-msgid "disable"
-msgstr "slå av"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr "avvis"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "reconfigure"
-msgstr "Konfigurer på nytt"
-
-#: ../../standalone/drakgw_.c:142
-msgid "Disabling servers..."
-msgstr "Slår av tjenere..."
-
-#: ../../standalone/drakgw_.c:150
-msgid "Internet connection sharing is now disabled."
-msgstr "Deling av Internett tilkobling er slått av"
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling av Internett tilkobling er slått av"
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
-"Dette er for øyeblikket slått av.\n"
-"\n"
-"Hva vil du gjøre?"
-
-#: ../../standalone/drakgw_.c:164
-msgid "enable"
-msgstr "slå på"
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr "Slår på tjenere..."
-
-#: ../../standalone/drakgw_.c:176
-msgid "Internet connection sharing is now enabled."
-msgstr "Deling av Internett tilkobling er nå slått på."
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er i ferd med å konfigurere maskinen din til å dele Internett-"
-"tilkobling.\n"
-"Andre maskiner i nettverket ditt vil da kunne bruke denne maskinens "
-"Internett tilkobling.\n"
-"\n"
-"Merk: du trenger et dedikert nettverksadapter for å sette opp et lokalt "
-"nettverk (LAN)."
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Grensesnitt %s (bruker modul %s)"
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid "Interface %s"
-msgstr "Grensesnitt %s"
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr "Ikke noe nettverksadapter i systemet ditt!"
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt. "
-"Vennligst kjør verktøyet for maskinvarekonfigurasjon."
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr "Nettverksgrensesnitt"
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Det er bare ett konfigurert nettverksadapter i systemet ditt:\n"
-"\n"
-"%s\n"
-"\n"
-"Jeg er i ferd med å sette opp ditt lokale nettverk (LAN) med dette adapteret."
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Vennligst velg hvilket nettverksadapter som skal kobles til ditt lokale "
-"nettverk (LAN)."
-
-#: ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor er ikke konfigurert"
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:273
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Konfigurasjon av automatiske skritt"
-
-#: ../../standalone/drakgw_.c:274
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Modifiser skriverkonfigurasjon"
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:294
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS tjener IP"
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt funnet i konfigurasjonen til %s!\n"
-
-#: ../../standalone/drakgw_.c:321
-msgid "Firewalling configuration detected!"
-msgstr "Brannmurkonfigurasjon oppdaget!"
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Advarsel! En eksisterende brannmurkonfigurasjon har blitt oppdaget. Du "
-"trenger muligens å konfigurere noe manuelt etter installasjon."
-
-#: ../../standalone/drakgw_.c:329
-msgid "Configuring..."
-msgstr "Konfigurerer..."
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer script, installerer programvare, starter tjenere..."
-
-#: ../../standalone/drakgw_.c:366
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer ved installering av pakke %s"
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt har blitt konfigurert.\n"
-"Du kan nå dele Internett-tilkobling med andre maskiner på ditt lokale "
-"nettverk ved å bruke automatisk nettverkskonfigurasjon (DHCP)."
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Oppsett har allerede blitt gjort, men er for øyeblikket slått av."
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Oppsett har allerede blitt gjort, og er for øyeblikket slått på."
-
-#: ../../standalone/drakgw_.c:568
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling av Internett tilkobling har aldri blitt konfigurert."
-
-#: ../../standalone/drakgw_.c:573
-msgid "Internet connection sharing configuration"
-msgstr "Internett deling av tilkobling konfigurasjon"
-
-#: ../../standalone/drakgw_.c:580
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Velkommen til verktøyet for deling av Internett tilkobling!\n"
-"\n"
-"%s\n"
-"\n"
-"Klikk på Konfigurer for å starte oppsett-hjelperen."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nettverkskonfigurasjon (%d adaptere"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Slett profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil som skal slettes:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Ny profil...."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Vertsnavn: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internett-tilgang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Type:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Grensesnitt:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurer internetttilgang...."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "rensesnitt"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurer lokalt nettverk"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Wizard..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Bruk"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Vennligst vent . . . Setter konfigurasjonen på plass"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Tilkoblet"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ikke tilkoblet"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Koble til..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Koble fra..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerte grensesnitt.\n"
-"Konfigurer disse først ved å klikke på 'Konfigurer'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN-konfigurasjon"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Oppstartsprotokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Startet ved oppstart"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktiver nå"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiver nå"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internett-tilkobling.\n"
-"Opprett en først ved å klikke på 'Konfigurer'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internett tilkobling konfigurasjon"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internett tilkobling konfigurasjon"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Oppkoblingstype:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametere"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernettkort"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr "Setter sikkerhetsnivå"
-
-#: ../../standalone/draksec_.c:57
-#, fuzzy
-msgid "Setting security user"
-msgstr "Setter sikkerhetsnivå"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollpanel"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Velg verktøyet du ønsker å bruke"
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadisk (Quebec)"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "China (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "France [SECAM]"
-msgstr "Frankrike"
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "Ireland"
-msgstr "Islansk"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-#, fuzzy
-msgid "Australia"
-msgstr "Østerrike"
-
-#: ../../standalone/drakxtv_.c:75
-#, fuzzy
-msgid "Newzealand"
-msgstr "Netherlands"
-
-#: ../../standalone/drakxtv_.c:76
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:131
-#, fuzzy
-msgid "There was an error while scanning for TV channels"
-msgstr "Det var en feil ved installering av pakkene:"
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "bruk: keyboarddrake [--expert] [tastatur]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Vennligst velg tastatur-oppsettet ditt."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ønsker du at BackSpace skal returnere Delete i konsoll?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Bytt CD"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Vennligst sett inn installasjons-CD'en i stasjonen og trykk Ok når du er\n"
-"ferdig. Hvis du ikke har denne, trykk Avbryt for å unngå oppgradering."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte oppgradering !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Vis kun for denne dag"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fil/_Ny"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fil/_Åpne"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>Å"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fil/_Lagre"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>L"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fil/Lagre _Som"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fil/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Valg"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Valg/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hjelp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Hjelp/_Om..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Brukernavn"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "meldinger"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "søk"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ett verktøy for å sjekke loggene dine"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Instillinger"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "lik"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "men ikke lik"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Velg fil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Innholdet i filen"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vennligst vent, gjennomgår %s"
-
-#: ../../standalone/logdrake_.c:407
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Lilo/Grub konfigurasjon"
-
-#: ../../standalone/logdrake_.c:408
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Velkommen til proxy-konfigurasjonsverktøyet.\n"
-"\n"
-"Her kan du sette opp dine http og ftp proxier\n"
-"med eller uten brukernavn og passord\n"
-
-#: ../../standalone/logdrake_.c:416
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:421
-#, fuzzy
-msgid "xinetd"
-msgstr "Avslutt"
-
-#: ../../standalone/logdrake_.c:424
-#, fuzzy
-msgid "service setting"
-msgstr "Tjener"
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:435
-#, fuzzy
-msgid "load setting"
-msgstr "Formatering"
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:449
-#, fuzzy
-msgid "alert configuration"
-msgstr "Internett-konfigurasjon"
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:493
-msgid "Save as.."
-msgstr "Lagre Som..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Vennligst velg din musetype."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ingen serie_usb funnet\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulere tredje knapp?"
-
-#: ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Leser skriverdata: ..."
-
-#: ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Finner enheter ..."
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Velg et grafikk-kort"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Oppstartsenhet"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Brannmurkonfigurasjon"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Brannmurkonfigurasjon"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brannmur\n"
-"\n"
-"Du har allerede satt opp en brannmur.\n"
-"Klikk på Konfigurer for å endre eller fjerne brannmuren"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brannmur\n"
-"\n"
-"Klikk på Konfigurer for å sette opp en standard brannmur"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Velg språk"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Velg installasjonsklasse"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Oppdaging av harddisk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurer mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Velg tastatur"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sikkerhet"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Oppsett filsystemer"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formater partisjoner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Velg pakker for installering"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installer systemet"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Legg til en bruker"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurer nettverk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurer tjenester"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installer oppstartslaster"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Opprett en oppstartdiskett"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurer X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Installer systemet"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Avslutt installering"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfigurering\n"
-"\n"
-"Dette konfigurerer en personlig brannmur for denne Mandrake Linux maskinen.\n"
-"For en kraftig dedikert brannmurløsning ta en kikk på den\n"
-"spesialiserte MandrakeSecurity Firewall distribusjonen."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi vil nå stille deg spørsmål om hvilke tjenester du vil tillate\n"
-"Internett å koble til. Tenk nøye over disse spørsmålene,\n"
-"da sikkerheten til maskinen din er viktig.\n"
-"\n"
-"Hvis du ikke bruker noen av disse tjenestene for øyeblikket, skru\n"
-"av brannmur. Du kan endre denne konfigurasjonen når du vil ved å\n"
-"kjøre denne applikasjonen på nytt!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kjører du en web-tjener på denne maskinen som hele hele Internett trenger\n"
-"å se? Hvis du kjører en web-tjener som kun trenger tilgang fra denne "
-"maskinen\n"
-"kan du trygt svare NEI her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kjører du en navnetjener på denne maskinen? Hvis du ikke satte opp en\n"
-"for å gi ut IP og soneinformasjon til hele Internett, vennligst svar nei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Ønsker du å tillate innkommende Secure Shell (ssh) tilkoblinger? Dette\n"
-"er et alternativ til telnet som du kan bruke til innlogg. Hvis du bruker\n"
-"telnet nå burde du definitivt bytte til ssh. telnet er ikke kryptert --\n"
-"så noen angripere kan stjele passordet ditt hvis du bruker det. ssh\n"
-"er kryptert og tillater ikke dette."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Ønsker du å tillate innkommende telnet tilkoblinger?\n"
-"Dette er forferdelig usikkert som vi forklarte i forrige skjermbilde. Vi\n"
-"anbefaler på det sterkeste å svare Nei her og bruke ssh i stedet for\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kjører du en FTP-tjener her som du trenger å ha tilgjengelig på\n"
-"Internett? I såfall anbefaler vi på det sterkeste at du kun bruker\n"
-"den til anonyme overføringer. Passord sendt med FTP kan stjeles av\n"
-"angripere, siden FTP heller ikke bruker kryptering for å overføre passord.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kjører du en epost-tjener her? Hvis du sender beskjeder via \n"
-"pine, mutt eller andre tekstbaserte epost-klienter gjør du\n"
-"antageligvis det. Eller skal du slå av dette.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kjører du en POP- eller IMAP-tjener her? Denne vil bli\n"
-"brukt som vert for ikke-web-baserte epost-kontoer via \n"
-"denne maskinen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Det ser ut til at du kjører en 2.2 kjerne. Hvis nettverks-IP'en\n"
-"din er automatisk satt av en maskin hjemme eller på kontoret \n"
-"(dynamisk tildelt), trenger vi å tillate dette.. Er dette\n"
-"tilfelle?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Mottar maskinen din tid synkronisert til en annen maskin?\n"
-"For det meste er dette brukt av medium-store /Unix/Linux\n"
-"organisasjoner for å synkronisere tid for ting som logging. Hvis\n"
-"du ikke er en del av et større kontor og ikke har hørt om dette\n"
-"gjør du antageligvis ikke."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasjon ferdig. Skal vi skrive endringene til disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan ikke åpne %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan ikke åpne %s for skriving: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Brannmurkonfigurasjon"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Vennligst vent, forbereder installasjon"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Nettverksmaskin (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-tjener, SMB-tjener, Proxy-tjener, SSH-tjener"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Verktøy for din Palm Pilot eller din Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Brannmur/ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Tjener for domenenavn og nettverksinformasjon"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontorprogrammer: tekstbehandlere (kword, abiword), regneark (kspread, "
-"gnumeric), pdf fremvisere etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Lydrelaterte verktøy: mp3 eller midi-spillere, miksere etc."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bøker og howto's om Linux og fri programvare"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE arbeidstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Sett med verktøy for e-post, nyheter, web, filoverføring og chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL eller MySQL database tjener"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Verktøy for å forenkle konfigurasjonen på maskinen din"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Lyd"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentasjon"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsollverktøy"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix posttjener, Inn nyhetstjener"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internettstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediastasjon"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurasjon"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mere grafiske skrivebord (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, basis grafikkmiljø med en samling av passende verktøy"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk miljø"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Verktøy for å opprette og brenne CD'er"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontor og arbeidsmaskin"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Tjener"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiske programmer så som Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C og C++ utviklingsbibliotek, programmer og include filer"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Nettverk datamaskintjener"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Gruppevare/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spillstasjon"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospillere og redigerere"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikk"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underholdningsprogrammer: arkade, bordspill, strategi etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Sett med verktøy for å lese og sende e-post og nyheter (pine, mutt, tin...) "
-"og for se på webben"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig finans"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Et grafisk miljø med et brukervennlig sett med applikasjoner og skrivebords- "
-"verktøy"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter for forskjellige protokoller inkludert ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internett-gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Lyd og bilde avspilling/redigeringsprogrammer"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andre grafiske skrivebord"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redigerere, skall, filverktøy, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmer for å håndtere dine finanser, så som gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personling informasjonshåndtering"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD-brenning"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vitenskaplig arbeidsstasjon"
-
-#~ msgid "Complete (%dMB)"
-#~ msgstr "Full (%dMB)"
-
-#~ msgid "Minimum (%dMB)"
-#~ msgstr "Minimum (%dMB)"
-
-#~ msgid "Recommended (%dMB)"
-#~ msgstr "Anbefalt (%dMB)"
-
-#~ msgid ""
-#~ "Is your printer a multi-function device from HP (OfficeJet, PSC, "
-#~ "PhotoSmart, LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-#~ msgstr ""
-#~ "Er skriveren din en multifunksjonsenhet fra HP (OfficeJet, PSC, "
-#~ "PhotoSmart, LaserJet 1100/1200/1220/3200/3300 med skanner)?"
-
-#~ msgid ""
-#~ "***********************************************************************\n"
-#~ "\n"
-#~ msgstr ""
-#~ "***********************************************************************\n"
-#~ "\n"
-
-#~ msgid ""
-#~ "\n"
-#~ "\n"
-#~ "***********************************************************************\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "\n"
-#~ "***********************************************************************\n"
-#~ "\n"
-
-#~ msgid "Utilities"
-#~ msgstr "Verktøy"
-
-#~ msgid "Archiving, emulators, monitoring"
-#~ msgstr "Arkivering, emulatorer, overvåkning"
diff --git a/perl-install/share/po/pl.po b/perl-install/share/po/pl.po
deleted file mode 100644
index 420d569c8..000000000
--- a/perl-install/share/po/pl.po
+++ /dev/null
@@ -1,13539 +0,0 @@
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Pawel Jablonski <pj@linux-mandrake.com>, 1999-2000.
-# Wojciech Karas <karas@uci.agh.edu.pl>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-10 10:57GMT+0200\n"
-"Last-Translator: Pawel Jablonski <pj@linux-mandrake.com>\n"
-"Language-Team: Polish <pl@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfiguruj wszystkie monitory niezale¿nie"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "U¿yj rozszerzenia Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguruj tylko kartê \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfiguracja wielomonitorowa"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Twój system obs³uguje wiele monitorów.\n"
-"Co chcesz zrobiæ?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Karta graficzna"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Wybierz kartê graficzn±"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Wybierz X serwer"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X serwer"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Wybierz X serwer"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X serwer"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Któr± konfiguracjê XFree chcesz mieæ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs³ugiwana tylko przez XFree %s.\n"
-"Twoja karta jest obs³ugiwana przez XFree %s, gdzie mo¿e byæ wydajniejsza "
-"obs³uga 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Dla Twojej karty akceleracja 3D jest obs³ugiwana tylko przez XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s z obs³ug± sprzêtowej akceleracji 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs³ugiwana przez XFree %s.\n"
-"JEST TO ROZWI¡ZANIE EKSPERYMENTALNE, MO¯E ZAWIESIÆ KOMPUTER."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s z EKSPERYMENTALN¡ obs³ug± sprzêtowej akceleracji 3D "
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dla Twojej karty akceleracja 3D jest obs³ugiwana tylko przez XFree %s.\n"
-"JEST TO ROZWI¡ZANIE EKSPERYMENTALNE, MO¯E ZAWIESIÆ KOMPUTER.\n"
-"Twoja karta jest obs³ugiwana przez XFree %s, gdzie mo¿e byæ wydajniejsza "
-"obs³uga 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Konfiguracja XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Okre¶l rozmiar pamiêci karty graficznej"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Wybierz opcje serwera"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Wybierz monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dwa krytyczne parametry to czêstotliwo¶æ synchronizacji pionowej,\n"
-"która okre¶la, jak czêsto od¶wie¿any jest ca³y ekran oraz najbardziej "
-"istotny\n"
-"- czêstotliwo¶æ synchronizacji poziomej - rysowania linii.\n"
-"\n"
-"Jest BARDZO WA¯NE aby nie podaæ typu monitora o wiêkszym zakresie\n"
-"czêstotliwo¶ci odchylania ni¿ mo¿liwo¶ci twojego monitora,\n"
-"poniewa¿ mo¿e to spowodowaæ jego uszkodzenie.\n"
-"Je¶li masz w±tpliwo¶ci, wybierz zachowawcze ustawienia."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Czêstotliwo¶æ synchronizacji poziomej"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Czêstotliwo¶æ synchronizacji pionowej"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Nie skonfigurowano monitora"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Nie skonfigurowano jeszcze karty graficznej"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Nie okre¶lono jeszcze rozdzielczo¶ci"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Chcesz przetestowaæ t± konfiguracjê?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Ostrze¿enie: testowanie tej karty mo¿e zawiesiæ komputer"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test konfiguracji"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"spróbuj zmieniæ jakie¶ parametry"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Wyst±pi³ b³±d:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Pozostalo %d sekund"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Czy te ustawienia sa prawidlowe?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Wyst±pi³ b³±d, spróbuj zmieniæ jakie¶ parametry"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rozdzielczo¶æ"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Okre¶l rozdzielczo¶æ oraz g³êbiê kolorów"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Karta graficzna: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Serwer XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Wiêcej"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Tryb eksperta"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Poka¿ wszystkie"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rozdzielczo¶ci"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Uk³ad klawiatury: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ myszy: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Port myszy: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Synchronizacja pozioma monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Synchronizacja pionowa monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Karta graficzna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Karta graficzna: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Pamiêæ karty: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Ilo¶æ kolorów: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozdzielczo¶æ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Serwer XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Sterownik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Przygotowywanie konfiguracji X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Co chcesz zrobiæ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Zmieniæ monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Zmieniæ kartê graficzn±"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Zmieniæ opcje serwera"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Zmieniæ rozdzielczo¶æ"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Obejrzeæ informacje"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Przetestowaæ ponownie"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Wyj¶æ"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachowaæ zmiany?\n"
-"Aktualna konfiguracja jest nastêpuj±ca:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X przy uruchomieniu "
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mo¿na skonfigurowaæ komputer, aby automatycznie po uruchomieniu startowa³y X-"
-"y.\n"
-"Czy chcesz, by X-y uruchamia³y siê po restarcie?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "By uaktywniæ zmiany zaloguj siê ponownie do %s"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Wyloguj siê i u¿yj kombinacji klawiszy Ctrl-Alt-BackSpace "
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kolorów (8 bitów)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tysi±ce kolorów (15 bitów)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tysiêcy kolorów (16 bitów)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milionów kolorów (24 bity)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy kolorów (32 bity)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB lub wiêcej"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardowa VGA, 640x480 przy 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 przy 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Zgodny z 8514, 1024x768 przy 87 Hz z przeplotem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 przy 87 Hz z przeplotem, 800x600 in 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Rozszerzona SVGA, 800x600 przy 60 Hz, 640x480 przy 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA bez przeplotu, 1024x768 przy 60 Hz, 800x600 przy 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Wysokoczêstotliwo¶ciowy SVGA, 1024x768 przy 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Wieloczêstotliwo¶ciowy do 1280x1024 przy 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Wieloczêstotliwo¶ciowy do 1280x1024 przy 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Wieloczêstotliwo¶ciowy do 1280x1024 przy 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor do 1600x1200 przy 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor do 1600x1200 przy 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Pierwszy sektor na partycji startowej"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Pierwszy sektor na dysku (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalacja SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdzie chcesz zainstalowaæ program rozruchowy?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalacja LILO/Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO z menu tekstowym"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO z menu graficznym"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start z DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Podstawowe opcje programu rozruchowego"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "U¿yty program rozruchowy"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalacja programu rozruchowego"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Urz±dzenie startowe"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nie funkcjonuje ze starszymi BIOSami)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Odczytuj du¿e bloki"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "du¿e bloki"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Tryb video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Opó¼nienie przed uruchomieniem domy¶lnego systemu"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Has³o"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Has³o (powtórnie)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ograniczenie opcji linii komend"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ograniczenie"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Wyczy¶ciæ /tmp przy ka¿dym starcie systemu"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Okre¶l rozmiar pamiêci, je¶li trzeba (znaleziono %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "W³±czyæ profile sprzêtowe?"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Podaj rozmiar pamiêci w MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcja \"Ograniczenie opcji linii komend\" nie dzia³a bez has³a"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Proszê spróbowaæ ponownie"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Has³a nie zgadzaj± siê"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Komunikat startowy"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Opó¼nienie uruchamiania"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Uaktywniæ uruchamianie z CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Enable OF Boot?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Domy¶lny system?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Masz nastêpuj±ce pozycje.\n"
-"Mo¿esz dodaæ nastêpne lub zmieniæ istniej±ce."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Zrobione"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modyfikuj"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Jakiego typu pozycjê chcesz dodaæ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Inny system operacyjny (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Inny system operacyjny (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Inny system operacyjny (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Obraz"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Do³±cz"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Startowy ramdysk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Zapis-odczyt"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Niebezpieczne"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etykieta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Domy¶lne"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Rozmiar startowego ramdysku"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "brak video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Usuñ pozycjê"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Pusta etykieta jest niedozwolona"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Musisz mieæ partycjê wymiany (swap)"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ta etykieta jest ju¿ u¿ywana"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Znaleziono %s  %s interfejsów"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Masz inne?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Czy masz interfejs %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nie"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Tak"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Poka¿ informacjê o sprzêcie"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalacja sterownika do karty %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modu³ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Który sterownik %s wypróbowaæ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"W pewnych przypadkach sterownik %s potrzebuje dodatkowych\n"
-"informacji do poprawnego dzia³ania, mimo ¿e zazwyczaj dzia³a\n"
-"bez nich. Czy chcesz podaæ dodatkowe parametry, czy te¿ \n"
-"pozwolisz sterownikowi wykryæ je automatycznie?\n"
-"Czasami wykrywanie mo¿e zawiesiæ komputer, nie powoduje to\n"
-"jednak ¿adnych problemów (utraty danych)."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autodetekcja"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Okre¶l parametry"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Mo¿esz przekazaæ do modu³u %s parametry.\n"
-"S± one w formacie \"nazwa1=warto¶æ1 nazwa2=warto¶æ2 ...\n"
-"Np. \"io=0x300 irq=7\" "
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcje modu³u:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nieudane za³adowanie modu³u %s.\n"
-"Chcesz spróbowaæ z innymi parametrami?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ju¿ dodano %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Has³o jest zbyt proste"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Proszê podaæ nazwê u¿ytkownika"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Nazwa u¿ytkownika mo¿e sk³adaæ siê tylko  z ma³ych liter, cyfr, `-'i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ten u¿ytkownik zosta³ ju¿ dodany"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj u¿ytkownika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Podaj dane u¿ytkownika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Akceptuj u¿ytkownika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nazwisko"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Identyfikator:"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Pow³oka"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatyczne logowanie"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mo¿na skonfigurowaæ komputer, by automatycznie logowa³ u¿ytkownika\n"
-"w systemie. Je¶li nie chcesz korzystaæ z tej mo¿liwo¶ci, wybierz Anuluj."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Wybierz domy¶lnego u¿ytkownika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Wybierz uruchamiane ¶rodowisko graficzne:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Wybierz jêzyk u¿ywania systemu"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Mo¿esz wybraæ inne jêzyki, które chcesz mieæ do dyspozycji po instalacji"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Wszystkie"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "U¿ytkownicy"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "U¿ytkownika"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Uruchamianie CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Ten pakiet musi byæ uaktualniony.\n"
-"Jeste¶ pewien, ¿e chcesz go odznaczyæ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Anuluj"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Witajcie, w³amywacze"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Z³y"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardowa"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Wysoki"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Wysoki"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidalny"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ten poziom powinien byæ u¿ywany ostro¿nie. Co prawda system jest ³atwiejszy\n"
-"do u¿ywania, ale jest te¿ bardziej wra¿liwy i mniej bezpieczny, szczególnie "
-"dla \n"
-"maszyn pracuj±cych  w Internecie. Nie ma zabezpieczenia has³em!"
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Has³a s± uaktywnione, ale ci±gle nie zalecamy u¿ywania komputera\n"
-"w sieci."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"To jest standardowy poziom zabezpieczeñ dla komputera, który bêdzie\n"
-"korzysta³ z sieci jako klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ten poziom umo¿liwia u¿ycie komputera jako serwera, który akceptuje\n"
-"po³±czenia z wieloma klientami przy zachowaniu wysokiego \n"
-"poziomu bezpieczeñstwa."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"To czwarty poziom zabezpieczeñ.\n"
-"System jest ca³kowicie zamkniêty, poziom zabezpieczeñ jest maksymalny."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Wybierz poziom bezpieczeñstwa"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Ustawienie poziomu bezpieczeñstwa"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Wybierz opcje serwera"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Witamy w programie wybierajacym system operacyjny- %s\n"
-"\n"
-"Wybierz system operacyjny z listy powyzej lub\n"
-"czekaj %d sekund na domyslny start.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Witamy w programie wybierajacym system - GRUB!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzyj %c i %c klawiszy , aby podswietlic pozycje."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nacisnij Enter, aby zaladowac wybrany system operacyjny, `e' aby wyedytowac"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komendy przed zaladowaniem albo `c' , aby pracowac w linii polecen."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Podswietlony system zostanie uruchomiony po %d sekundach."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nie ma ju¿ miejsca na /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Pulpit"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu startowe"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Gdzie chcesz zainstalowaæ program rozruchowy?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "brak pomocy.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Plik"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Plik/Za_koñcz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>k"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Wygl±d nowoczesny z kategoriami"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Styl nowoczesny"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Wygl±d tradycyjny"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Wygl±d tradycyjny Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Uaktywnij graficzny start"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Tryb Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Tryb Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"%s jest programem uruchamiaj±cym system (bootloaderem)\n"
-"Wybierz Konfiguruj, by uruchomiæ kreatora.."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguruj"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Tryb pracy systemu"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Uruchom X-Window po uruchomieniu"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nie, nie chcê automatycznego logowania"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Tak, chcê dla tego u¿ytkownika korzystaæ z automatycznego logowania"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nie mo¿na otworzyæ dla odczytu /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Nie mo¿na dodaæ wiêcej partycji"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Mo¿esz wybraæ inne jêzyki, które chcesz mieæ do dyspozycji po instalacji"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francja"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "belgijski"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "niemiecki"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "grecki"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "norweski"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Patrz"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "w³oski"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "szeregowa"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Proszê zacz±æ od archiwizacji danych"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Czytaj uwa¿nie!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Je¿eli masz zamiar  u¿ywaæ aboot pamiêtaj, by zostawiæ, \n"
-"wolne miejsce na pocz±tku dysku - wystarczy 2048 sektorów."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "B³±d"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Kreator"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Wybierz czynno¶æ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Na dysku jest jedna wielka partycja FAT.\n"
-"(zazwyczaj u¿ywana przez Microsoft Dos/Windows)\n"
-"Nale¿y zacz±æ od pomniejszenia tej partycji\n"
-"(kliknij na partycji, po czym kliknij na \"Zmieñ rozmiar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Proszê klikn±æ na partycji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Szczegó³y"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "nieudane montowanie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Pusta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Inna"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Typy systemu plików:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Utwórz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "U¿yj zamiast tego ``%s'' "
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Usuñ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najpierw ``Odmontuj'' "
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Po zmianie typu partycji %s, wszystkie dane na niej zostan± utracone"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Wybierz czynno¶æ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Utwórz now± partycjê"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Prze³±cz na tryb zaawansowany"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prze³±cz na tryb standardowy"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Cofnij"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Kontynuowaæ mimo to?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Wyj¶cie bez zapisywania"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Opu¶ciæ program bez zapisywania tablicy partycji?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcesz przetestowaæ t± konfiguracjê?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Rozmie¶æ automatycznie"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Wyczy¶æ wszystko"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Wykrywanie dysków"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Wszystkie partycje podstawowe s± u¿ywane"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nie mo¿na dodaæ wiêcej partycji"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"By mieæ wiêcej partycji, nale¿y usun±æ jedn±,\n"
-"by by³o mo¿liwe utworzenie partycji rozszerzonej."
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Zapisz tablicê partycji"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Odzyskaj tablicê partycji"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Odzyskaj tablicê partycji"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Odzyskaj tablicê partycji"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automatyczne montowanie wyjmowanych dysków"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Wybierz plik"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Zapasowa tablica partycji ma inny rozmiar\n"
-"Kontynuowaæ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Ostrze¿enie"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"W³ó¿ dyskietkê do stacji.\n"
-"Wszystkie dane na niej zostan± utracone"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Próba odzyskania tablicy partycji"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Obejrzeæ informacje"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punkt montowania"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcje"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Zmieñ rozmiar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Przesuñ"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatuj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montuj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odmontuj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Usuñ z RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Usuñ z LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modyfikuj RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "U¿yj na plikopartycjê"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Utwórz now± partycjê"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sektor startowy: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Rozmiar w MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Typ systemu plików: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punkt montowania: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencja:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatowanie plikopartycji %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Zmiana typu partycji"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Jakiego systemu plików potrzebujesz?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Prze³±czenie z ext2 do ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdzie chcesz zamontowaæ plikopartycje %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdzie chcesz zamontowaæ urz±dzenie %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nie mo¿na odmontowaæ tej partycji, gdy¿ jest u¿ywana przez plikopartycjê.\n"
-"Zacznij od usuniêcia plikopartycji."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Obliczanie granic systemu plików FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Zmiana rozmiaru"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Tej partycji nie mo¿na zmniejszyæ"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Wszystkie dane na tej partycji powinny zostaæ zarchiwizowane"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Po zmianie rozmiaru partycji %s, wszystkie dane na niej zostan± utracone"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Okre¶l nowy rozmiar"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Rozmiar w MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na który dysk chcesz przenie¶æ ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na który sektor chcesz przenie¶æ ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Przenoszenie"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Przenoszenie partycji..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Wybierz istniej±cy RAID aby dodaæ do niego"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nowy"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Wybierz istniej±cy LVM aby dodaæ do niego"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nazwa LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Na tej partycji nie mo¿na za³o¿yæ plikopartycji"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Plikopartycja"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nazwa plikopartycji: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nazwisko"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Plik jest ju¿ u¿ywany jako plikopartycja, wybierz inny"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Plik ju¿ istnieje. U¿yæ go?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcje modu³u:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "urz±dzenie"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "poziom"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "rozmiar kawa³ka"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Uwa¿aj: ta operacja jest niebezpieczna"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Okre¶l sposób partycjonowania."
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Niestety, nie mo¿na utworzyæ /boot tak daleko na dysku (poza cylindrem "
-"1024)\n"
-"Albo u¿yjesz LILO, (nie bêdzie dzia³aæ), lub nie bêdziesz u¿ywaæ lilo\n"
-"i nie potrzebujesz /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Doda³e¶ partycjê root (/) na dysku poza cylindrem 1024, nie ma te¿\n"
-"partycji /boot. Je¿eli wiêc chcesz u¿ywaæ programu rozruchowego lilo\n"
-"dodaj partycjê /boot poni¿ej cylindra 1024"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Wybra³e¶ jako partycjê root (/) programowy RAID.\n"
-"¯aden program rozruchowy nie jest w stanie obs³u¿yæ jej bez partycji /boot.\n"
-"Pamiêtaj wiêc o dodaniu partycji /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tablica partycji napêdu %s bêdzie zapisana na dysk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Nale¿y zrestartowaæ komputer przed uaktywnieniem zmian"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Po sformatowaniu wszystkie dane na partycji %s, zostan± utracone"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatowanie"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatowanie plikopartycji %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatowanie partycji %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid pad³"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rozdzielczo¶æ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Urz±dzenie: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Dosowy dysk: (przypuszczalnie %s)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Rodzaj: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nazwa:"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Pocz±tek: sektor  %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Rozmiar: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorów"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d do cylindra %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Sformatowana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nie sformatowana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Zamontowano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Plikopartycje:%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Domy¶lna partycja startowa\n"
-"    (dla startu MS-DOS, nie dla lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Poziom %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Rozmiar kawa³ka %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dyski RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nazwa plikopartycji: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Rozmiar: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cylindrów, %s g³owic, %s sektorów\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informacje: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dyski LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabeli partycji: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na szynie %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcje: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Typ systemu plików: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "To has³o jest zbyt proste ( musi byæ co najmniej %d znaków)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Has³a nie zgadzaj± siê"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Zmiana typu partycji"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Proszê klikn±æ na partycji"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Serwer DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatowania z %s nieudane"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nie wiadomo jak sformatowaæ %s typu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck zwróci³o kod b³êdu %d lub sygna³ %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "b³±d odmontowania %s; %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "proste"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serwer"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nie mo¿na u¿ywaæ JFS na partycji mniejszej ni¿ 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nie mo¿na u¿ywaæ ReiserFS na partycji mniejszej ni¿ 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Punkty montowania musz± zaczynaæ siê od /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Istnieje partycja z punktem montowania %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nie mo¿n u¿yæ LVM dla punktu montowania %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ten katalog powinien byæ wewn±trz systemu plików / (root)"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Dla tego punktu montowania potrzebujesz porz±dnego systemu plików (ext2,"
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nie mo¿n u¿yæ LVM dla punktu montowania %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Brak wolnego miejsca dla automatycznego rozmieszczenia"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "B³±d otwarcia %s do zapisu: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Wyst±pi³ b³±d - nie znaleziono urz±dzeñ, na których mo¿na utworzyæ nowe \n"
-"systemy plików. Sprawd¼ sprzêt, by wykryæ przyczynê"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nie masz ¿adnych partycji!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Powy¿ej pokazano wykryte na Twoim dysku istniej±ce partycje linuksowe\n"
-"Mo¿esz zastosowaæ wybór okre¶lony przez kreatora, s± one odpowiednie\n"
-"w wiêkszo¶ci przypadków. Jesli chcesz zmieniæ , musisz okre¶liæ co najmniej\n"
-"partycjê root (\"/\"). Nie wybieraj zbyt ma³ej partycji - nie bêdziesz móg³ "
-"wówczas\n"
-"zainstalowaæ zbyt du¿o oprogramowania. Je¶li chcesz trzymaæ swoje dane na \n"
-"oddzielnej partycji, mo¿esz tak¿e wybraæ \"/home\" (jest to mo¿liwe tylko, "
-"je¶li\n"
-"masz wiêcej ni¿ jedn± partycjê linuksow±\n"
-"\n"
-"\n"
-"Dla informacji, ka¿da partycja jest okre¶lona przez \"Nazwê\" i \"Rozmiar"
-"\".\n"
-"\n"
-"\n"
-"Nazwa jest okre¶lana nastêpuj±co: \"typ dysku\",\"numer dysku\",\n"
-"\"numer partycji\". (na przyk³ad \"hda1\").\n"
-"\n"
-"\n"
-"\"Typ dysku\" to \"hd\" w przypadku dysków IDE, \"sd\" w przypadku SCSI\n"
-"\n"
-"\n"
-"\"Numer dysku\" to litera po \"hd\" lub \"sd\". W przypadku dysku IDE:\n"
-"\n"
-"   * \"a\" oznacza pierwszy dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"b\" oznacza drugi dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"c\" oznacza pierwszy dysk na drugim kontrolerze IDE\n"
-"\n"
-"   * \"d\" oznacza drugi dysk na drugim kontrolerze IDE\n"
-"\n"
-"\n"
-"W przyadku dysków SCSI \"a\" oznacza pierwszy dysk twardy,\n"
-"\"b\" - drugi dysk twardy, itd."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Teraz mo¿esz wybraæ us³ugi, jakie chcesz mieæ w³±czone przy starcie\n"
-"systemu.\n"
-"\n"
-"\n"
-"Je¿eli najedziesz mysz± na element listy, to pojawi siê ma³y ob³oczek\n"
-"z opisem tej us³ugi.\n"
-"\n"
-"\n"
-"Zachowaj szczególn± ostro¿no¶æ przy wyborze, je¿eli chcesz u¿ywaæ\n"
-"swojej maszyny jako serwera - niektórych us³ug nie bêdziesz chcia³\n"
-"uruchamiaæ. Pamiêtaj, ¿e uruchomienie niektórych us³ug na serwerze\n"
-"mo¿e byæ niebezpieczne.\n"
-"W ogólno¶ci, uruchamiaj tylko te us³ugi, których naprawdê potrzebujesz."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"W tym etapie instalacji okre¶lasz, gdzie na dysku zostanie zainstalowany\n"
-"Mandrake Linux. Je¶li dysk jest pusty lub istniej±ce systemy operacyjne\n"
-"zajmuj± ca³e dostêpne miejsce, nale¿y podzieliæ dysk na partycje\n"
-"Partycjonowanie to po prostu logiczny podzia³ twardego dysku na oddzielne\n"
-"obszary w celu zainstalowania systemu Mandrake Linux\n"
-"\n"
-"\n"
-"Poniewa¿ efekt partycjonowania jest nieodwracalny, czynno¶æ wydaje siê\n"
-"straszna i jest stresuj±ca dla niedo¶wiadczonych u¿ytkowników.\n"
-"Kreator ten upraszcza ten proces, tak wiêc nie siê czego obawiaæ,\n"
-"tym niemniej warto po¶wiêciæ nieco czasu na wcze¶niejsze\n"
-"zapoznanie siê z dokumentacj±\n"
-"\n"
-"\n"
-"Niezbêdne s± co najmniej 2 partycje: jedna dla systemu operacyjnego\n"
-"oraz druga na pamiêæ wirtualn± (swap).\n"
-"\n"
-"\n"
-"Je¶li partycje tes ju¿ zosta³y utworzone (w czasie poprzedniej instalacji\n"
-"lub przy pomocy innego narzêdzia), nale¿y je wybraæ do zainstalowania\n"
-"systemu Linux\n"
-"\n"
-"\n"
-"Je¶li partcje te nie istniej± , nale¿y je utworzyæ.\n"
-"By to zrobiæ, u¿yj powy¿szego kreatora. Mo¿liwych jest kilka rozwi±zañ\n"
-"zale¿nych od konfiguracji dysku twardego:\n"
-"\n"
-"* U¿ycie istniej±cych partycji: gdy kreator wykryje jedn± lub wiêcej "
-"istniej±cych partycji linuksowych,\n"
-"   wybierz to rozwi±zanie, je¶li chcesz u¿yæ te partycje na now± "
-"instalacjê.\n"
-"\n"
-"\n"
-"* Skasowanie zawarto¶ci ca³ego dysku: Je¶li chcesz skasowaæ ze swojego\n"
-"dysku wszystkie dane i wszystkie partycje\n"
-"  i zast±piæ nowym systemem Mandrake Linux, wybierz to rozwi±zanie. Pamiêtaj,"
-"w tym przypadku nie\n"
-"  nie ma mo¿liwo¶ci odwrotu po potwierdzeniu wyboru.\n"
-"\n"
-"\n"
-"*  U¿yj wolnego miejsca na partycji Windows: Je¶li na dysku jest "
-"zainstalowany\n"
-"Microsoft Windows i zajmuje \n"
-"  ca³e dostêpne miejsce,mo¿liwe jest utworzenie wolnego miejsca dla Linuksa. "
-"By to zrobiæ, mo¿na skasowaæ \n"
-"  partycjê Windows wraz z danymi (patrz \"Wyma¿ ca³y dysk\" lub \"Tryb "
-"eksperta\") lub zmieniæ\n"
-"  rozmiar partycji Windows. Zmiana rozmiaru jest realizowana bez\n"
-"utraty ¿adnych danych. \n"
-"  To rozwi±zanie jest zalecane, je¶li chcesz u¿ywaæ zarówno Linuksa-"
-"Mandrake, jak i Windows\n"
-"\n"
-"\n"
-"  Nale¿y pamiêtaæ, ¿e w ten sposób partycja Windows bêdzie mniejsza ni¿ do "
-"tej pory. Oznacza to\n"
-" mniej wolnego miejsca na dane oraz instalacjê nowych programów\n"
-"\n"
-"\n"
-"* Tryb eksperta: wybierz t± opcjê, je¶li chcesz partycjonowaæ swój dysk "
-"rêcznie.Pamiêtaj!\n"
-"  Wybranie tej opcji daje Ci du¿e mo¿liwo¶ci, lecz jest bardzo niebezpieczne."
-"Bardzo ³atwo mo¿na utraciæ wszystkie dane\n"
-"  Nie wybieraj wiêc tej opcji, je¶li naprawdê nie wiesz, co robisz!"
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Wszystkie nowo powsta³e partycje musz± zostaæ sformatowane przed\n"
-"wykorzystaniem (formatowanie oznacza utworzenie systemu plików).\n"
-"\n"
-"\n"
-"Mo¿na teraz tak¿e powtórnie sformatowaæ istniej±ce ju¿ partycje, by\n"
-"usun±æ znajduj±ce siê na nich dane. Je¶li chcesz to zrobiæ, zaznacz\n"
-"partycje do sformatowania\n"
-"\n"
-"\n"
-"Pamiêtaj, ¿e nie jest konieczne formatowanie wszystkich istniej±cych ju¿\n"
-"partycji. Nale¿y sformatowaæ partycje zawieraj±ce system operacyjny:\n"
-"\"/\", \"/usr\" oraz \"/var\", nie jest natomiast konieczne formatowanie\n"
-"partycji zawieraj±cych dane, które chcesz zachowaæ (zazwyczaj /home).\n"
-"Uwa¿nie wybieraj partycje do sformatowania, po sformatowaniu wszystkie\n"
-"dane zostan± utracone bez mo¿³iwo¶ci ich odzyskania.\n"
-"\n"
-"\n"
-"Wybierz \"OK\", je¶li jeste¶ ju¿ gotowy do formatowania partycji.\n"
-"\n"
-"\n"
-"Wybierz \"Anuluj\", je¶li chcesz wybraæ do zainstalowania\n"
-"Linuksa-Mandrake inne partycje."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Trwa instalacja systemu operacyjnego Mandrake Linux.\n"
-"Zabierze to trochê czasu (w zale¿no¶ci od ilo¶ci  wybranych pakietów\n"
-"oraz szybko¶ci komputera)\n"
-"\n"
-"\n"
-"B±d¼ cierpliwy."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"W tym etapie instalacji wybierasz partycje, na których bêdzie instalowany\n"
-"Mandrake Linux, je¶li istniej±, np. pozosta³y po poprzedniej instalacji,\n"
-"lub te¿ zosta³y za³o¿one innym narzêdziem. W przeciwnym razie nale¿y je\n"
-"utworzyæ. Operacja ta polega na logicznym podziale dysku twardego komputera\n"
-"na na oddzielne obszary\n"
-"\n"
-"\n"
-"Utworzenie partycji nale¿y rozpocz±æ od wybrania dysku. Robi siê to przez\n"
-"klikniêcie na zak³adce \"hda\" dla pierwszego dysku IDE, \"hdb\" dla "
-"drugiego,\n"
-"lub \"sda1\" dla pierwszego dysku SCSI, itd.\n"
-"\n"
-"\n"
-"W celu podzielenia dysku na partycje mo¿na u¿yæ nastêpuj±cych opcji:\n"
-"\n"
-"   * Wyczy¶æ wszystko: ta opcja kasuje wszystkie partycje na wybranym "
-"dysku.\n"
-"\n"
-"\n"
-"   * Rozmie¶æ automatycznie: ta opcja automatycznie tworzy partycje ext2\n"
-"     oraz swap na wolnym (niespartycjonowanym) miejscu dysku\n"
-"\n"
-"\n"
-"   * Odzyskaj tablicê partycji: je¶li tablica partycji jest uszkodzona, "
-"mo¿na\n"
-"     spróbowaæ j± odzyskaæ przy pomocy tej opcji. B±d¼ ostro¿ny i pamiêtaj,\n"
-"¿e ta opcja mo¿e zawie¶æ\n"
-"\n"
-"\n"
-"   * Cofnij: u¿yj tej opcji by anulowaæ zmiany.\n"
-"\n"
-"\n"
-"   * Prze³aduj: u¿yj tej opcji, je¶li chcesz cofn±æ wszystkie zmiany i "
-"za³adowaæ\n"
-"     pocz±tkow± tablicê partycji\n"
-"\n"
-"\n"
-"   * Kreator: Mo¿esz u¿yæ kreatora, który pomo¿e Ci podzieliæ dysk na "
-"partycje\n"
-"     Zalecane, je¶li niewiele wiesz o podziale na partycje.\n"
-"\n"
-"\n"
-"   * Przywróæ z dyskietki: je¶li podczas poprzedniej instalacji zapisa³e¶ "
-"tabelê\n"
-"     partycji na dyskietce, mo¿esz odzyskaæ j± korzystaj±c z tej opcji.\n"
-"\n"
-"\n"
-"   * Zapisz na dyskietkê: Mo¿esz zapisaæ na dyskietkê tablicê partycji, by "
-"mieæ\n"
-"     mo¿liwo¶æ jej odzyskania w przypadku pomy³ki\n"
-"     U¿ycie tej opcji jest bardzo zalecane\n"
-"\n"
-"\n"
-"   * Zrobione: po zakoñczeniu partycjonowania dysku u¿yj tej opcji do "
-"zapisania\n"
-"     na dysku zmian.\n"
-"\n"
-"\n"
-" Mo¿esz wybraæ odpowiedni± opcjê u¿ywaj±c klawisza \n"
-"TAB i strza³ek góra/dó³ klawiatury. \n"
-"\n"
-"\n"
-"Po wybraniu partycji mo¿esz nacisn±æ:\n"
-"\n"
-"           * Ctrl-c by utworzyæ now± partycjê ( je¿eli zosta³ wybrany pusty "
-"obszar\n"
-"\n"
-"           * Ctrl-d by usun±æ partycjê\n"
-"\n"
-"           * Ctrl-m by okre¶liæ punkt montowania"
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Na dysku wykryto wiêcej ni¿ jedn± partycjê Windows. Wybierz, któr±\n"
-"z nich chcesz zmniejszyæ w celu zainstalowania Mandrake Linux\n"
-"\n"
-"\n"
-"Dla informacji, ka¿da partycja jest okre¶lona przez\n"
-" \"Nazwê linuksow±\", \"Nazwê Windows\" i \"Rozmiar\".\n"
-"\n"
-"\n"
-"Nazwa linuksowa jest okre¶lana nastêpuj±co: \"typ dysku\",\"numer dysku\",\n"
-"\"numer partycji\". (na przyk³ad \"hda1\").\n"
-"\n"
-"\n"
-"\"Typ dysku\" to \"hd\" w przypadku dysków IDE, \"sd\" w przypadku SCSI\n"
-"\n"
-"\n"
-"\"Numer dysku\" to litera po \"hd\" lub \"sd\". W przypadku dysku IDE:\n"
-"\n"
-"   * \"a\" oznacza pierwszy dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"b\" oznacza drugi dysk na pierwszym kontrolerze IDE\n"
-"\n"
-"   * \"c\" oznacza pierwszy dysk na drugim kontrolerze IDE\n"
-"\n"
-"   * \"d\" oznacza drugi dysk na drugim kontrolerze IDE\n"
-"\n"
-"\n"
-"W przyadku dysków SCSI \"a\" oznacza pierwszy dysk twardy,\n"
-"\"b\" - drugi dysk twardy, itd.\n"
-"\n"
-"\"Nazwa Windows\" to litera dysku pod Windows (pierwszy dysk \n"
-"lub partycja to \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "B±d¼ cierpliwy. Ta operacja mo¿e potrwaæ kilkana¶cie minut."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Wybierz \"Instalacja\" je¶li nie masz zainstalowanej starszej wersji\n"
-"Mandrake Linux, lub je¶li chcesz u¿ywaæ wielu dystrybucji lub wersji.\n"
-"\n"
-"\n"
-"Wybierz \"Aktualizacja\" je¶li chcesz zaktualizowaæ ju¿ zainstalowan± wersjê "
-"Mandrake Linux:\n"
-"\n"
-"\n"
-"W zale¿no¶ci od poziomu Twojej znajomo¶ci GNU/Linuksa mo¿esz wybraæ jeden z "
-"nastêpuj±cych sposobów  instalacji\n"
-" lub aktualizacji systemu operacyjnego Mandrake Linux.\n"
-"\n"
-"* Zalecany: Je¶li nie instalowa³e¶ GNU/Linuksa nigdy wcze¶niej, wybierz ten "
-"sposób instalacji,\n"
-"  jest bardzo prosty, odpowiesz na kilka prostych pytañ\n"
-"\n"
-"\n"
-"* U¿ytkownika: Je¶li jeste¶ obeznany z GNU/Linux, mo¿esz okre¶liæ podstawowe "
-"zastosowanie komputera. (stacja robocza, serwer\n"
-"  programowanie). Odpowiesz tak¿e na wiêcej pytañ, ni¿ przy sposobie "
-"instalacji \"Zalecany\".\n"
-"  tak wiêc powiniene¶ trochê znaæ GNU/Linuksa, by wybraæ ten "
-"rodzajinstalacji\n"
-"\n"
-"\n"
-"* Ekspert: Je¶li dobrze znasz  GNU/Linuksa, wybierz ten sposób instalacji "
-"Podobnie jak w instalacji \"U¿ytkownika\", bêdziesz móg³ okre¶liæ podstawowe "
-"zastosowanie komputera. Przemy¶l,\n"
-" czy na pewno chcesz wybraæ ten rodzaj instalacji. Bêdziesz móg³ "
-"przeprowadziæ bardzo zindywidualizowan± instalacjê, lecz\n"
-"  odpowied¼ na niektóre pytania mo¿e byæ bardzo trudna bez dobrej znajomo¶ci "
-"GNU/Linuksa.\n"
-"  Nie wybieraj wiêc tego rodzaju instalacji, je¶li nie jeste¶ pewien."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Wybierz w³a¶ciwy port. Na przyk³ad COM1 z MS Windows\n"
-"w GNU/Linux nazywa siê ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO ( LInux LOader ) i Grub to programy rozruchowe: potrafi± uruchomiæ\n"
-"GNU/Linux lub inny system operacyjny, zainstalowany na twoim komputerze.\n"
-"Zazwyczaj inne istniej±ce w komputerze systemy s± prawid³owo wykrywane\n"
-"i instalowane. Je¿eli tak nie jest, powiniene¶ \"rêcznie\" wprowadziæ\n"
-"odpowiednie dane. Uwa¿nie wybieraj w³a¶ciwe parametry.\n"
-"\n"
-"\n"
-"Mo¿esz oczywi¶cie równie¿ uniemo¿liwiæ dostêp do nich przy starcie przez \n"
-"usuniêcie ich z listy. W tej sytuacji musisz jednak posiadaæ dyskietki\n"
-"startowe, by je uruchomiæ."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Powiniene¶ wskazaæ, gdzie chcesz\n"
-"umie¶ciæ informacje wymagane do uruchomienia GNU/Linuxa\n"
-"\n"
-"\n"
-"Je¶li nie wiesz dok³adnie, co robisz, wybierz\n"
-" \"Pierwszy sektor na dysku (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Instalator spróbuje wykryæ kontroler(y) SCSI na magistrali PCI.\n"
-"Je¶li je odnajdzie i rozpozna, które sterowniki nale¿y u¿yæ\n"
-"za³aduje je automatycznie.\n"
-"\n"
-"Je¶li posiadasz kontroler  SCSI ISA, lub PCI, ale instalator nie\n"
-"wykryje sterownika do niego, zostaniesz zapytany, czy w Twoim\n"
-"systemie istnieje kontroler SCSI. Je¶li nie masz ¿adnego, odpowiedz\n"
-"\"Nie\", je¶li masz jeden lub wiêcej, odpowiedz \"Tak\". Uka¿e siê\n"
-"wówczas lista sterowników, z której nale¿y wybraæ w³a¶ciwy.\n"
-"\n"
-"\n"
-"Po wybraniu sterownika, instalator spyta Ciê, czy chcesz okre¶liæ\n"
-"opcje dla niego. Pozwól sterownikowi automatycznie wykryæ \n"
-"ustawienia, zazwyczaj dzia³a to dobrze\n"
-"\n"
-"\n"
-"Je¶li nie, podaj sterownikowi opcje znalezione w dokumentacji,\n"
-"na stronie producenta sprzêtu (je¶li masz dostêp do Internetu)\n"
-"lub takie, jak w Windows (je¶li je posiadasz). Podrêcznik instalacji\n"
-"pomo¿e Ci odnale¼æ potrzebne parametry."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-"  - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-"  - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-"  - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'.  You can override this "
-"option here.\n"
-"\n"
-"\n"
-"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-"  - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-"  - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-"  - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot.  The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-"  - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Wybierz dysk, który chcesz wykasowaæ, by za³o¿yæ na nim\n"
-"partycje Mandrake Linux. Pamiêtaj, ¿e wszystkie dane z tego\n"
-"dysku zoastan± utracone bez mo¿liwo¶ci odzyskania."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Wybierz \"OK\", je¶li chcesz usun±æ dane na wszystkich partycjach\n"
-"istniej±cych na dysku. Pamiêtaj, po wybraniu \"OK\", nie bêdzie\n"
-"mo¿liwe odzyskanie ¿adnych danych z partycji (tak¿e Windows)\n"
-"\n"
-"\n"
-"Wybierz \"Anuluj\", by anulowaæ t± operacjê bez utraty danych."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Wybrano nastêpuj±ce serwery: %s\n"
-"\n"
-"\n"
-"Bêd± one domy¶lnie uruchamiane. Nie zawieraj± one ¿adnych znanych b³êdów\n"
-"zwi±zanych z bezpieczeñstwem, lecz mog± one zostaæ w przysz³o¶ci ujawnione.\n"
-"W takiej sytuacji nale¿y dokonaæ jak najszybszego uaktualnienia.\n"
-"\n"
-"\n"
-"Czy na pewno chcesz zainstalowaæ te serwery?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nie u¿ywaj rozg³aszania przy braku domeny NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "W³ó¿ sformatowan± (FAT) dyskietkê do stacji %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ten dysk nie jest sformatowany."
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"By u¿yæ zapisanej listê pakietów, nale¿y uruchomiæ instalacjê z opcj± "
-"''linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "B³±d odczytu pliku %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Czê¶æ sprzêtu w Twoim komputerze wymaga \"firmowych\" sterowników.\n"
-"Wiêcej informacji na ten temat uzyskasz z %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musisz mieæ partycjê root.\n"
-"W tym celu, utwórz partycjê ( lub kliknij na istniej±c±),\n"
-"nastêpnie Wybierz \"Punkt montowania\" `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Musisz mieæ partycjê wymiany (swap)"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nie masz partycji swap\n"
-"\n"
-"Kontynuowaæ mimo to?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musisz mieæ partycjê FAT zamontowan± w /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Wykorzystaj wolne miejsce"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Brak wolnego miejsca do stworzenia nowych partycji"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "U¿yj istniej±cej partycji"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Brak istniej±cych partycji do wykorzystania"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Wykorzystaj miejsce na partycji Windows na plikopartycjê"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Któr± partycjê chcesz u¿yæ dla Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Okre¶l rozmiary"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Rozmiar partycji root w MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Rozmiar partycji swap w MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Wykorzystaj wolne miejsce na partycji Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Któr± partycjê chcesz zmniejszyæ?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Obliczanie granic systemu plików Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program zmniejszaj±cy partycjê FAT nie potrafi obs³u¿yæ\n"
-"Twojej partycji. Wyst±pi³ nastêpuj±cy b³±d: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Twoja partycja Windows jest zbyt sfragmentowana, uruchom \"defrag\""
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"OSTRZE¯ENIE!\n"
-"\n"
-"Instalator zmieni teraz rozmiar partycji Windows.\n"
-"Uwa¿aj, jest to niebezpieczne. Je¶li wcze¶niej tego nie zrobi³e¶,\n"
-"nale¿y przerwaæ instalacjê, wróciæ do Windows, zeskanowaæ\n"
-"i zdefragmentowaæ dysk po czym powtórnie uruchomiæ instalacjê. \n"
-"Warto równie¿ zarchiwizowaæ dane na dysku.\n"
-"Je¶li jeste¶ pewny, wybierz OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Jaki ma byæ docelowy rozmiar partycji Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partycja %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Zmiana rozmiaru partycji FAT nie powiod³a siê: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nie ma partycji FAT do zmiany rozmiaru lub u¿ycia jako plikopartycjên(lub "
-"brak wolnego miejsca)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Wyma¿ ca³y dysk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Usuñ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Masz wiêcej ni¿ 1 dysk twardy, na którym z nich chcesz zainstalowaæ linuxa?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"WSZYSTKIE istniej±ce partycje i dane na nich zostan± usuniête z dysku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Zaawansowany podzia³ na partycje"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "U¿yj fdiska"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Mo¿esz teraz tworzyæ partycje  %s \n"
-"Gdy skoñczysz, pamiêtaj o zapisaniu u¿ywaj±c `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Masz za ma³o wolnego miejsca na partycji Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Brak miejsca na instalacjê"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Kreator podzia³u na partycje proponuje nastêpuj±ce rozwi±zania:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partycjonowanie nie powiod³o siê: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Uruchamianie sieci"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Zatrzymywanie sieci"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Wyst±pi³ jaki¶ b³±d. Nie mo¿na poprawnie go obs³u¿yæ\n"
-"Kontynuuj na w³asn± odpowiedzialno¶æ."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Powielony punkt montowania %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Pewne istotne pakiety nie zosta³y poprawnie zainstalowane.\n"
-"Prawdopodobnie uszkodzona jest p³yta lub napêd CDROM.\n"
-"Sprawd¼ p³ytê w innym komputerze u¿ywaj±c polecenia:\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Witamy w %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Niedostêpna stacja dyskietek"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Przechodzê do kroku `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Twój system ma ma³o zasobów. Mog± wyst±piæ problemy z instalacj±.\n"
-"Je¶li tak siê stanie, spróbuj instalacji w trybie tekstowym.\n"
-"By j± uruchomiæ, naci¶nij F1 podczas startu z CD i wpisz \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Klasa instalacji"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Wybierz jedn± z nastêpuj±cych klas instalacji:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ca³kowity rozmiar dla wybranych grup to oko³o %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Je¿eli chcesz zainstalowaæ mniej,\n"
-"podaj procentowo rozmiar, który mo¿esz przeznaczyæ na instalacjê.\n"
-"Ma³y procent spowoduje instalacjê tylko najwa¿niejszych pakietów,\n"
-"100%% spowoduje zainstalowanie wszystkich wybranych pakietów."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Masz miejsce na dysku tylko na %d%% pakietów.\n"
-"\n"
-"Je¶li chcesz zainstalowaæ mniej, okre¶l procentowo, ile pakietów\n"
-" chcesz zainstalowaæ. Ma³y procent spowoduje instalacjê tylko\n"
-"najwa¿niejszych pakietów,\n"
-"Wybór  %d%% spowoduje zainstalowanie tylu pakietów ile siê da."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "W nastêpnym kroku mo¿na bêdzie wybraæ bardziej precyzyjnie"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procent pakietów do instalacji"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Wybór grup pakietów"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Samodzielny wybór pakietów"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ca³kowity rozmiar: %d  / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakiet uszkodzony"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nazwa: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Wersja: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Rozmiar: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Wa¿no¶æ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nie mo¿esz wybraæ tego pakietu. Nie ma ju¿ miejsca, by go zainstalowaæ"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Zostan± zainstalowane nastêpuj±ce pakiety"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Zostan± usuniête nastêpuj±ce pakiety"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Nie mo¿na zmieniæ statusu tego pakietu."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ten pakiet jest konieczny, nie mo¿na go pomin±æ"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nie mo¿na odznaczyæ tego pakietu. Zosta³ ju¿ zainstalowany."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ten pakiet musi byæ uaktualniony.\n"
-"Jeste¶ pewien, ¿e chcesz go odznaczyæ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nie mo¿na odznaczyæ tego pakietu. Musi zostaæ zamieniony na nowszy"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Poka¿ automatycznie wybrane pakiety"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalacja"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Odczytaj/Zapisz na dyskietkê"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Uaktualnianie listy wybranych pakietów"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalna instalacja"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Wybierz pakiety do zainstalowania"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalowanie"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Szacowanie"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Pozosta³o czasu "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Proszê czekaæ, trwa przygotowywanie instalacji"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakietów"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalowanie pakietu %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akceptuj"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odrzuæ"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Zmieñ p³ytê CD!\n"
-"\n"
-"W³ó¿ p³ytê zatytu³owan± \"%s\" do kieszeni czytnika i naci¶nij Ok.\n"
-"Je¶li jej nie masz, naci¶nij Anuluj, by omin±æ instalacjê pakietów z niej"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Kontynuowaæ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Wyst±pi³ b³±d porz±dkowania pakietów:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Wyst±pi³ b³±d podczas instalowania pakietów:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Wyst±pi³ b³±d"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Chcesz zrestartowaæ sieæ?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Umowa licencyjna"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klawiatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Wybierz uk³ad klawiatury."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Oto lista dostêpnych uk³adów klawiatury"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Okre¶l klasê instalacji"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalacja/Uaktualnienie"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Czy to instalacja, czy uaktualnienie?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Zalecana"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Dla eksperta"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uaktualnienie"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Uaktualnianie listy wybranych pakietów"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Wybierz typ myszy."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port myszy"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Do którego portu szeregowego jest pod³±czona mysz?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacja przycisków"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacja 2 przycisku"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulacja 3 przycisku"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguracja kart PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfiguracja IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "brak dostêpnych partycji"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Przeszukiwanie partycji w celu okre¶lenia punktów montowania"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Wybierz punkty montowania"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nie mo¿na odczytaæ tablicy partycji, jest zbyt uszkodzona :(\n"
-"Mo¿na kontynuowaæ USUWAJ¡C WSZYSTKIE DANE\n"
-"Innym rozwi±zaniem jest zabronienie instalatorowi modyfikowania tabeli "
-"partycji\n"
-" (wyst±pi³ b³±d: %s)\n"
-"\n"
-"Czy zgadzasz siê na utratê wszystkich partycji?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Instalator nie mo¿e odczytaæ poprawnie tablicy partycji.\n"
-"Kontynuuj na w³asn± odpowiedzialno¶æ!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Brak wolnej przestrzeni na 1MB bootstrap. Instalacja bêdzie kontynuowana,\n"
-"lecz nale¿y utworzyæ partycjê bootstrap."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Nie znaleziono partycji root, na której mo¿na przeprowadziæ aktualizacjê"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partycja root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Która partycja jest w Twoim systemie partycj± root (/)"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Nale¿y zrestartowaæ komputer w celu uaktywnienia zmian w tablicy partycji"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Wybierz partycje do sformatowania"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Sprawdziæ fizycznie partycje?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatowanie partycji"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Tworzenie i formatowanie plikopartycji %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Wielko¶æ partycji wymiany jest niewystarczaj±ca, nale¿y j± zwiêkszyæ"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Wyszukiwanie dostêpnych pakietów"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Wyszukiwanie pakietów do uaktualnienia"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Zbyt ma³o miejsca na instalacjê lub uaktualnienie (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Pe³na (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Zalecana (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Proszê wybraæ odczytanie lub zapis listy wybranych pakietów\n"
-"na dyskietkê. Format jest identyczny z dyskiem automatycznej\n"
-"instalacji."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Odczytaj z dyskietki"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Odczytywanie z dyskietki"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Wybór pakietów"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "W³ó¿ dyskietkê zawieraj±c± listê wybranych pakietów"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Zapisz na dyskietkê"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Wybrany rozmiar przekracza dostêpne miejsce"
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Wybierz pakiety do zainstalowania"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Czekaj"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Je¿eli masz wszystkie p³yty CD z listy, kliknij Ok.\n"
-"Je¿eli nie masz ¿adnej z p³yt z listy, kliknij Anuluj.\n"
-"Je¿eli niektórych p³yt z listy nie masz, odznacz je i kliknij  Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM oznaczony \"%s\" "
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Przygotowywanie instalacji"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalowanie pakietu %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfiguracja poinstalacyjna"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "W³ó¿ dyskietkê startow± do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "W³ó¿  dyskietkê z uaktalnionymi modu³ami do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Masz teraz mo¿liwo¶æ pobrania z sieci oprogramowania, s³u¿±cego do "
-"szyfrowania\n"
-"\n"
-"OSTRZE¯ENIE:\n"
-"Z powodu ró¿nych ograniczeñ prawnych maj±cych zastosowanie do \n"
-"tego oprogramowania, Klient lub (i) u¿ytkownik powinien byæ pewien,\n"
-"¿e przepisy go dotycz±ce pozwalaj± na kopiowanie, przechowywanie\n"
-"i u¿ywanie tego oprogramowania.\n"
-"\n"
-"Dodatkowo klient lub (i) u¿ytkownik, powinien byæ ostrze¿ony,\n"
-"aby nie z³amaæ praw obowi±zuj±cych w jego jurysdykcji.\n"
-"Je¿eli klient lub (i) u¿ytkownik nie przestrzega³by obowi±zuj±cych \n"
-"go przepisów, mog± dotkn±æ go powa¿ne sankcje.\n"
-"\n"
-"Ani Mandrakesoft ani jego producenci lub dostawcy nie s± odpowiedzialni\n"
-"za jakiekolwiek celowe, przypadkowe lub po¶rednie szkody\n"
-"powsta³e z u¿ywania, posiadania lub tylko zainstalowania oprogramowania,\n"
-"do którego klient lub (i) u¿ytkownik bêdzie mia³ dostêp po wyra¿eniu \n"
-"zgody na powy¿sze zastrze¿enia .\n"
-"Wszystkie zapytania, dotycz±ce niniejszego uzgodnienia proszê kierowaæ do:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "£±czenie z mirrorem - pobieranie listy dostêpnych pakietów"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Wybierz mirror, z którego chcesz pobraæ pakiety"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "£±czenie z mirrorem - pobieranie listy dostêpnych pakietów"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wybierz swoj± strefê czasow±."
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Ustawienie zegar sprzêtowego na czas GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatyczna synchronizacja czasu (przy u¿yciu NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Serwer NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Brak drukarki"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Masz inne?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ró¿ne"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mysz"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Strefa czasowa"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Drukarka"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Karta ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Karta d¼wiêkowa"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Karta TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Pliki lokalne"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Has³o roota"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez has³a"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "To has³o jest zbyt proste ( musi byæ co najmniej %d znaków)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentykacja"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentykacja LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Serwer LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentykacja NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domena NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Serwer NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Dysk startowy umo¿liwia uruchomienie systemu Linux niezale¿nie od "
-"normalnego\n"
-"programu rozruchowego. Jest u¿yteczny, je¶li nie chcesz instalowaæ SILO,\n"
-"lub SILO w Twoim systemie nie dzia³a oraz je¶li inny system operacyjny\n"
-"usun±³ SILO. Dysk u¿ytkownika mo¿na tak¿e u¿ywaæ z obrazem ratunkowym,\n"
-"u³atwiaj±c naprawienie systemu w przypadku awarii.\n"
-"Je¶li chcesz utworzyæ dysk startowy dla swojego systemu, w³ó¿ dyskietkê\n"
-"do stacji i wybierz \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Pierwsza stacja dyskietek"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Druga stacja dyskietek"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Pomiñ"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Dysk startowy umo¿liwia uruchomienie systemu Linux niezale¿nie od\n"
-"normalnego programu rozruchowego. Jest u¿yteczny, je¶li nie chcesz\n"
-"instalowaæ LILO/Grub, lub programy te w Twoim systemie nie dzia³aj±\n"
-"oraz je¶li inny system operacyjny usun±³ LILO/grub.\n"
-"Dysku tego mo¿na tak¿e u¿ywaæ z obrazem ratunkowym,\n"
-"u³atwiaj±c naprawienie systemu w przypadku awarii.\n"
-"Czy chcesz dla swojego systemu utworzyæ dysk startowy?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Niestety, stacja dyskietek jest niedostêpna."
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Wybierz stacjê dyskietek, której u¿yjesz do stworzenia dysku startowego"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "W³ó¿ dyskietkê do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Tworzenie dysku startowego"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Przygotowanie programu rozruchowego"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Czy chcesz u¿ywaæ aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"B³±d podczas instalowania aboot. \n"
-"Wymusiæ instalacjê, nawet gdyby grozi³o to zniszczeniem pierwszej partycji?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Program rozruchowy"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Instalacja programu rozruchowego nie powiod³a siê. Wyst±pi³ nastêpuj±cy b³±d:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "W³ó¿ pust± dyskietkê do stacji %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Tworzenie dyskietki automatycznej instalacji"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Pewne etapy instalacji nie zosta³y zakoñczone\n"
-"\n"
-"Czy na pewno chcesz teraz zakoñczyæ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulacje, instalacja zosta³a zakoñczona.\n"
-"Usuñ p³ytê i (lub) dyskietkê z napêdów i naci¶nij enter, by zrestartowaæ.\n"
-"\n"
-"\n"
-"Informacje o poprawkach dotycz±cych tej wersji Mandrake Linux\n"
-"znajdziesz na stronach\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacje o konfiguracji systemu znajduj± siê\n"
-"w Oficjalnym Podrêczniku U¿ytkownika Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Tworzenie dyskietki automatycznej instalacji"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatyczna instalacja mo¿e byæ, je¶li jest taka potrzeba\n"
-"przeprowadzona w sposób ca³kowicie samodzielny.\n"
-"Zajmie ona wówczas ca³y dysk,\n"
-"co ma znaczenie przy instalacj na innym komputerze.\n"
-"\n"
-"Mo¿na za¿yczyæ sobie odtworzenia instalacji.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatyczna"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Odtwórz ponownie"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Zapisz listê wybranych pakietów"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalacja Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> miêdzy element.  | <Spacja> wybór | <F12> nastêpny ekran "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "brakuje kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Wybierz czynno¶æ"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Zaawansowane"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Proszê czekaæ"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informacje"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Rozwiñ drzewo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Zwiñ drzewo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Prze³±cz miêdzy p³askim i grupowym sortowaniem"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Z³y wybór, spróbuj ponownie\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Twój wybór? (domy¶lnie %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Twój wybór? (domy¶lnie %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcje: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Czy chcesz u¿ywaæ aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Twój wybór? (domy¶lnie %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "czeski (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "niemiecki"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvoraka"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "hiszpañski"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "fiñski"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "francuski"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norweski"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "polski"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "rosyjski"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "szwedzki"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "angielski"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "amerykañski"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "albañski"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "armeñski (stary)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "armeñski - fonetyczny"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "armeñski - fonetyczny"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerski (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belgijski"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "armeñski - fonetyczny"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "bu³garski"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brazylijski(ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "bia³oruski"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "szwajcarski (uk³ad niemiecki)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "szwajcarski (uk³ad francuski)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "czeski (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "niemiecki ( bez martwych klawiszy)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "duñski"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoraka (norweski)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvoraka (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "estoñski"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "gruziñski (uk³ad rosyjski)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "gruziñski (uk³ad ³aciñski)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "grecki"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "wêgierski"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "chorwacki"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "izraelski"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "izraelski (fonetyczny)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Irañski"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "islandzki"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "w³oski"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japoñski 106 klawiszy"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "koreañski"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latyno-amerykañski"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "litewski AZERTY"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "litewski AZERTY"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "litweski QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "litewski QWERTY - fonetyczny"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Lokalizacja"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedoñska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "holenderski"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "polski (programisty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "polski (maszynistki)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugalski"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "kanadyjski (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "rumuñski (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "rumuñski (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "rosyjski (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "s³oweñski"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "s³owacki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "s³owacki (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "azerski (cyrilic)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabela"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "tajski"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "tajski"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turecki"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turecki (nowy)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukraiñski"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "amerykañski (miêdzynarodowy)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "wietnamski QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "jugos³owiañski - (³aciñski/cyrylica)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Zapêtlone montowanie %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Zacznij od usuniêcia logicznych dysków (LV)\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mysz Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mysz standardowa PS/2 z kó³kiem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1-przyciskowa"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mysz standardowa 2-przyciskowa"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Standardowa"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "z kó³kiem"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "szeregowa"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mysz standardowa 3-przyciskowa"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech seria CC"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "Seria MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet (szeregowy)"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mysz Logitech (szeregowa, stary typ C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2-przyciskowa"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3-przyciskowa"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "brak"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Brak myszy"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Przetestuj mysz"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "By uaktywniæ mysz,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "RUSZ KÓ£KIEM!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Zakoñcz"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Dalej ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Poprzedni"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Dzia³a prawid³owo?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Po³±czenie z Internetem"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Njabardziej typowym sposobem po³±czenia przez ADSL jest ppoe.\n"
-"Isteniej± jednak po³±czenia u¿ywaj±ce pptp oraz nieliczne - dhcp.\n"
-"Je¶li nie wiesz, wybierz \"u¿yj pppoe\""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "u¿yj dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "u¿yj pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "u¿yj pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Jaki program klienta DHCP chcesz u¿yæ?\n"
-"Domy¶lnym jest dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nie wykryto w systemie karty sieciowej.\n"
-"Nie mo¿na skonfigurowaæ tego typu po³±czenia."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Wybierz interfejs sieciowy"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Proszê wybraæ kartê sieciow± któr± chcesz u¿yæ do po³±czenia z Internetem"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nie znaleziono karty sieciowej"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Proszê wpisaæ nazwê komputera, je¶li j± znasz\n"
-"Niektóre z serwerów DHCP wymagaj± jej do dzia³ania.\n"
-"Nazwa ta powinna byæ w postaci pe³nej,\n"
-"np. \"mojkomputer.mojadomena.pl\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nazwa komputera"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Kreator konfiguracji sieci"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Zewnêtrzny modem ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Wewnêtrzna karta ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Okre¶l rodzaj po³±czenia ISDN"
-
-#: ../../network/isdn.pm_.c:45
-#, fuzzy
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Jaki sposób konfiguracji ISDN preferujesz?\n"
-"\n"
-"* Stary sposób konfiguracji przy u¿yciu isdn4net. Wykorzystuje narzêdzia\n"
-"o du¿ych mo¿liwo¶ciach, lecz jest niestandardowy i podstêpny dla "
-"pocz±tkuj±cych\n"
-"\n"
-"* Nowy sposób konfiguracji jest ³atwiejszy do zrozumienia, bardziej "
-"standardowy,\n"
-"lecz daje mniej narzêdzi.\n"
-"\n"
-"Zalecany jest nowy sposób konfiguracji.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nowa konfiguracjia (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracji (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Konfiguracja ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Wybierz swojego dostawcê Internetu.\n"
-"Je¶li nie ma go na li¶cie, wybierz \"Unlisted\""
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokó³ uruchamiania"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Reszta ¶wiata"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Reszta ¶wiata \n"
-" bez kana³u D (linie dzier¿awione)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Jakiego protoko³u chcesz u¿yæ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Jaki rodzaj karty posiadasz?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nie wiem"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Je¶li posiadasz kartê ISA, warto¶ci na nastêpnym ekranie\n"
-"powinny byæ odpowiednie\n"
-"Je¶li posiadasz kartê PCMCIA, powiniene¶ znaæ IRQ i IO swojej karty.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Przerwij"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Kontynuuj"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Wybierz swoj± kartê ISDN"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Wykryto kartê ISDN PCI nieznanego typu. Proszê wybraæ jedn± z listy na "
-"kolejnym ekranie."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nie wykryt± ¿adnej karty ISDN PCI. Proszê wybraæ jedn± z listy na kolejnym "
-"ekranie."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Wska¿ port szeregowy, do którego pod³±czony jest modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcje dzwonienia"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nazwa po³±czenia"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Numer telefonu"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Identyfikator"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Oparta o skrypt"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Poprzez terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domena"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Pierwszy serwer DNS (opcjonalnie)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi serwer DNS (opcjonalnie)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¿esz roz³±czyæ siê lub zrekonfigurowaæ po³±czenie."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¿esz zrekonfigurowaæ po³±czenie."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Jeste¶ ju¿ po³±czony z Internetem."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¿esz po³±czyæ siê z Internetem lub zrekonfigurowaæ po³±czenie."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Nie jeste¶ teraz po³±czony z Internetem."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Po³±cz"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Roz³±cz"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet - po³aczenie i konfiguracja"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Bêdziemy teraz konfigrowaæ po³±czenie %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Bêdziemy teraz konfigurowaæ po³±czenie %s.\n"
-"\n"
-"\n"
-"By rozpocz±æ, naci¶nij Dalej."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Poniewa¿ przeprowadzasz instalacjê przez sieæ, jest ona ju¿ skonfigurowana.\n"
-"Wybierz OK by zachowaæ konfiguracjê, lub Anuluj by ponownie skonfigurowaæ "
-"sieæ/po³±czenie z Intenetem.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Witaj w Kreatorze Konfiguracji Sieci\n"
-"\n"
-"S³u¿y on do konfiguracji po³±czenia z Intenetem lub inn± sieci±.\n"
-"Je¶li nie chcesz korzystaæ z autodetekcji, odznacz to pole.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Wybierz profil do konfiguracji"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "U¿yj autodetekcji"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Wykrywanie urz±dzeñ..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Po³±czenie modemowe"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "wykryto na porcie %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Po³±czenie ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "wykryto %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Po³±czenie ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "wykryto na interfejsie %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Po³±czenie przez kablówkê"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "wykryto po³±czenie przez kablówkê"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Sieæ lokalna"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "wykryto kartê(y) ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Wybierz po³±czenie, które chcesz skonfigurowaæ"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Skonfigurowano ró¿ne sposoby po³±czenia z Internetem.\n"
-"Wybierz ten, z którego chcesz korzystaæ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Po³±czenie z Internetem"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Czy chcesz ³±czyæ siê Internetem przy uruchamianiu komputera?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Konfiguracja sieci"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Wyst±pi³ problem podczas restartowania sieci: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulacje, konfiguracja sieci i Internetu zosta³a zakoñczona.\n"
-"\n"
-"Zostanie teraz zapisana w twoim systemie.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Po zakoñczeniu zalecane jest zrestartowanie X w celu ominiêcia\n"
-"problemu wynikaj±cego ze zmian± nazwy hosta."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"OSTRZE¯ENIE: Urz±dzenie to zosta³o poprzednio skonfigurowane do po³±czenia z "
-"Internetem.\n"
-"Naci¶nij po prostu OK by zachowaæ konfiguracjê.\n"
-"Modyfikacja pól poni¿ej spowoduje nadpisanie istniej±cej konfiguracji."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Proszê podaæ konfiguracjê IP dla komputera.\n"
-"Ka¿da pozycja powinna byæ wpisana w zapisie dziesiêtnym\n"
-"oddzielonym kropkami (np. 192.168.1.1)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguracja urz±dzenia sieciowego %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (sterownik %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adres IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatyczne IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Adres IP powinien byæ w formacie typu 192.168.1.1"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Proszê wpisaæ nazwê komputera.\n"
-"Nazwa ta powinna byæ w postaci pe³nej,\n"
-"np. \"mojkomputer.mojadomena.pl\".\n"
-"Je¶li jest to potrzebne, nale¿y wpisaæ te¿ adres routera."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Serwer DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Interfejs (np. eth0)"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfiguracja po¶rednika (proxy)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Po¶rednik HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Po¶rednik FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Nazwa po¶rednika powinna byæ typu: http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Nazwa po¶rednika powinna byæ typu: ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Czy chcesz teraz spróbowaæ po³±czyæ siê Internetem?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testowanie po³±czenia..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Jeste¶ teraz po³±czony z Internetem."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Ze wzglêdu na bezpieczeñstowo po³±czenie zostanie teraz roz³±czone."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Po³±czenie z Internetem nie uda³o siê.\n"
-"Spróbuj zmieniæ konfiguracjê po³±czenia."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfiguracja po³±czenia"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Wype³nij lub zaznacz pole poni¿ej"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Numer Twojego telefonu"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nazwa dostawcy us³ug (np. Dialog, Netia, TPSA)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Numer telefonu dostawcy us³ug"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1 DNS dostawcy (opcjonalnie)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2 DNS dostawcy (opcjonalnie)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Wybór klawiatury"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Sposób wybierania"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Szybko¶æ po³±czenia"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Czas po³±czenia:"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konto (nazwa u¿ytkownika)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Has³o:"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "nieudane montowanie: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Na tej platformie nie istniej± partycje rozszerzone"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"W tablicy partycji jest puste miejsce pomiêdzy partycjami, którego\n"
-"nie mo¿na wykorzystaæ. Jedynym rozwi±zaniem jest przesuniêcie\n"
-"partycji podstawowych, by puste miejsce by³o obok partycji rozszerzonych"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Przywracanie z pliku %s nie powiod³o siê: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "B³±d zapisu do pliku %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Z Twoim dyskiem dzieje siê co¶ niedobrego. \n"
-"Nie powiód³ siê test spójno¶ci danych. \n"
-"Oznacza to, ¿e zapisanie czegokolwiek na dysku mo¿e siê ¼le skoñczyæ"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "musisz mieæ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "wa¿ny"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "bardzo fajny"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "fajny"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "taki sobie"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Drukarka lokalna"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Drukarka sieciowa"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Sieciowy serwer lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Drukarka sieciowa (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Serwer wydruku"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Port drukarki URI:"
-
-#: ../../printer.pm_.c:55
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "Potok do polecenia"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Drukarka lokalna"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Drukarka sieciowa"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "B³±d zapisu do pliku %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, fuzzy, c-format
-msgid ", using command %s"
-msgstr "Potok do polecenia"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modu³ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP serwera CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Domy¶lne)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Wybierz sposób pod³±czenia drukarki"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Jak jest pod³±czona drukarka?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Korzystaj±c z sieciowego serwera CUPS nie musisz tutaj\n"
-"konfigurowaæ ¿adnych drukarek; zostan± one automatycznie\n"
-"wykryte, chyba ¿e znajduje siê on w innej sieci, w tym przypadku\n"
-"nale¿y podaæ adres serwera CUPS oraz opcjonalnie numer portu."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Zdalny serwer CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Adres IP powinien byæ w formacie typu 192.168.1.1"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Numer portu powinien byæ liczb±"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP serwera CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Wykrywanie urz±dzeñ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testowanie portów"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Dodaj drukarkê"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Drukarka lokalna"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "U¿yj autodetekcji"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "wykryto %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Port drukarki URI:"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Drukarka lokalna"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Wska¿ port szeregowy, do którego pod³±czony jest modem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Port drukarki URI:"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Konfiguracja kolorów"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Odczytywanie bazy sterowników CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Odczytywanie bazy sterowników CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcje drukarki sieciowej lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"By u¿ywaæ kolejki drukarki sieciowej lpd nale¿y podaæ\n"
-"nazwê serwera wydruku oraz nazwê kolejki na\n"
-"serwerze, do której kierowane bêd± zadania wydruku."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nazwa serwera:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nazwa serwera: brak nazwy!"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nazwa serwera: brak nazwy!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcje drukarki SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"By drukowaæ na drukarce SMB, musisz okre¶liæ nazwê serwera SMB\n"
-"(nie zawsze jest ona równoznaczna z nazw± TCP/IP), o ile mo¿liwe\n"
-"adres IP serwera wydruku,nazwê u¿ytkownika, grupê, has³o oraz\n"
-"oczywi¶cie nazwê drukarki."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Nazwa serwera SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP serwera SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nazwa drukarki"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Nale¿y podac nazwê serwera lub jego adres IP!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Brakuje nazwy udzia³u Samby!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcje drukarki NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"By drukowaæ na drukarce NetWare, nale¿y podaæ nazwê serwera\n"
-"wydruku NetWare (nie zawsze to samo co nazwa TCP/IP!),\n"
-"nazwê kolejki drukarki, do której chcesz uzyskaæ dostêp,\n"
-"oraz w³a¶ciw± nazwê u¿ytkownika i has³o."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Serwer wydruku"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nazwa kolejki drukarki"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Brakuje nazwy serwera NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Brakuje nazwy kolejki NCP!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcje drukarki sieciowej"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"By drukowaæ na drukarce sieciowej, nale¿y podaæ\n"
-"nazwê sieciow± drukarki oraz opcjonalnie numer portu."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nazwa sieciowa drukarki"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Brakuje nazy drukarki sieciowej!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Port drukarki URI:"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "A valid URI must be entered!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ka¿da drukarka musi mieæ nazwê (na przyk³ad lp).\n"
-"Pola Opis i Lokalizacja nie musz± byc wype³niane.\n"
-"S± to komentarze dla u¿ytkowników."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nazwa drukarki"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokalizacja"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Odczytywanie bazy sterowników CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Dzia³a prawid³owo?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Wybór modelu drukarki"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Jaki model drukarki posiadasz?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, fuzzy, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Port musi byæ dodatni± liczb± ca³kowit±!"
-
-#: ../../printerdrake.pm_.c:1521
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "Port musi byæ dodatni± liczb± ca³kowit±!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Czy chcesz wydrukowaæ stronê testow±?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Testowanie portów"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Drukarka"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardowa"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Strona testowa zosta³a wys³ana do demona drukowania.\n"
-"Mo¿e chwilê potrwaæ, zanim pojawi siê wydruk\n"
-"Status drukowania:\n"
-"%s\n"
-"\n"
-"Czy wydruk jest prawid³owy?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Strona testowa zosta³a wys³ana do demona drukowania.\n"
-"Mo¿e chwilê potrwaæ, zanim pojawi siê wydruk\n"
-"Czy wydruk jest prawid³owy?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Brak drukarki"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zamknij"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Zatrzymywanie sieci"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Zatrzymywanie sieci"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcje drukarki"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Nazwa drukarki powinna zawieraæ tylko litery, cyfry i znak podkre¶lenia"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Brak drukarki"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Odczytywanie bazy sterowników CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfiguracja Lilo/Grub"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Otwieranie po³±czenia..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfiguracja sieci"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Nie skonfigurowano monitora"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfiguracja sieci"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Jakiego systemu wydruku zamierzasz u¿ywaæ?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Wysoki"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidalny"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Jakiego systemu wydruku zamierzasz u¿ywaæ?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Wybierz system wydruku"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Jakiego systemu wydruku zamierzasz u¿ywaæ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfiguracja drukarki"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcje drukarki"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfiguracja drukarki"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Czy chcesz skonfigurowaæ drukowanie?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Drukarka"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Istniej± nastêpuj±ce kolejki wydruku.\n"
-"Mo¿esz dodaæ nastêpne lub zmieniæ istniej±ce."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Istniej± nastêpuj±ce kolejki wydruku.\n"
-"Mo¿esz dodaæ nastêpne lub zmieniæ istniej±ce."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Konfiguracja sieci"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Tryb zwyk³y"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Chcesz przetestowaæ t± konfiguracjê?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Chcesz przetestowaæ t± konfiguracjê?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Po³±czenie z Internetem"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Wybór modelu drukarki"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Drukowanie stron/y testowych/ej"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Chcesz przetestowaæ t± konfiguracjê?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Drukarka sieciowa"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Drukarka lokalna"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcesz zrestartowaæ sieæ?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drukarka sieciowa"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfiguracja po¶rednika (proxy)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Narzêdzie do konfiguracji po¶rednika.\n"
-"\n"
-"Pozwala na skonfigurowanie po¶redników http oraz ftp\n"
-"z (lub bez) nazw± u¿ytkownika oraz has³em\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Proszê wprowadziæ dane po¶rednika http ,\n"
-"lub pozostawiæ puste, je¶li z niego nie korzystasz"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL powinien zaczynaæ siê od: http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Numer portu powinien byæ liczb±"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Proszê wprowadziæ dane po¶rednika ftp ,\n"
-"lub pozostawiæ puste, je¶li z niego nie korzystasz"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL powinien zaczynaæ siê od: ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Proszê podaæ nazwê u¿ytkownika po¶rednika\n"
-"oraz has³o lub pozostawiæ pola puste"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Nazwa u¿ytkownika"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "has³o"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Powtórz has³o"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Has³a nie zgadzaj± siê. Spróbuj ponownie!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nie mo¿na dodaæ partycji do sformatowanego RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nie mo¿na zapisaæ pliku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid pad³"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid pad³ ( mo¿e brak raidtools)?"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Za ma³o partycji dla RAID poziom %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Uruchamia podsystem d¼wiêku ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron - program uruchamiaj±cy okresowo zadania."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd przekazuje przez syslog informacje o stanie akumulatorów.\n"
-"Umo¿liwia tak¿e zamkniêcie systemu, gdy s± one zbyt wy³adowane."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Uruchamia o okre¶lonym czasie programy zaplanowane do wykonania komend± \"at"
-"\"\n"
-"oraz wykonuje zadania wsadowe, gdy obci±¿enie systemu jest niewielkie."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron jest standardowym programem unixowym, który zarz±dza wykonywaniem\n"
-"programów u¿ytkownika w okre¶lonych przez niego porach."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM umo¿liwia pos³ugiwanie siê mysz± w aplikacjach,\n"
-"pracuj±cych pod konsol± Linuxa jak np. Midnigth Commander.\n"
-"Umo¿liwia operacje Wytnij-Wklej oraz wybór opcji poprzez wyskakuj±ce menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake przeprowadza wykrywanie sprzêtu oraz opcjonalnie \n"
-"konfiguruje nowy lub zmieniony sprzêt."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache to serwer WWW. Jest u¿ywany do udostêpniania plików \n"
-"HTML i CGI w Internecie/Intranecie."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetowy (super)demon, zwany inetd startuje wiele us³ug internetowych,\n"
-"takich jak telnet, ftp, rsh i rlogin.\n"
-" Wy³±czenie go uniemo¿liwia korzystanie z tych us³ug."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Uruchomienie filtrowania pakietów dla kernela Linuxa w wersji 2.2\n"
-"zabezpiecza komputer przed atakiem z sieci."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ten pakiet ³aduje wybrane mapowania klawiatury, zgodnie z zawarto¶ci±\n"
-"pliku /etc/sysconfig/keyboard. Mog± one byæ prze³±czane przy pomocy\n"
-"narzêdzia kbdconfig. Powinien byæ uruchomiony w wiêkszo¶ci przypadków."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatyczna regenracja nag³ówków kernela w /boot\n"
-"dla /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatyczne wykrywanie i konfiguracja sprzêtu przy uruchomieniu"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"LinuxConf umo¿liwia przeprowadzenie podczas uruchamiania\n"
-"ró¿nych zadañ zwi±zanych z konserwacj± systemu."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd to demon, konieczny do prawid³owego dzia³ania lpr,a przez to ca³ego \n"
-"systemu drukowania."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Wirtualny Serwer linuxowy u¿ywane jest przy tworzeniu bardzo wydajnych\n"
-"serwerów o du¿ej niezwodno¶ci."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Named (BIND) to DNS -czyli serwer, umo¿liwiaj±cy t³umaczenie\n"
-"nazw komputerów na ich adresy IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montuje i odmontowuje wszystkie punkty zamontowania systemów plików \n"
-"NFS ( sieciowe systemy plików), SMB {LAN Manager/Windows} i NCP ( NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"W³±cza/wy³±cza skonfigurowane interfejsy sieciowe\n"
-"podczas uruchamiania systemu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS jest popularnym protoko³em udostêpniania plików w sieci TCP/IP.\n"
-"Ta us³uga uruchamia konfigurowany przez plik /etc/exports serwer NFS."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS jest popularnym protoko³em udostêpniania plików w sieci TCP/IP.\n"
-"Ta us³uga umo¿liwia dzia³anie w NFS funkcji blokowania plików."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatycznie w³acza klawiaturê numeryczn± przy uruchamianiu \n"
-"w trybie konsoli oraz graficznym."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-"Zapewnia obs³ugê drukarek OKI dla Windows\n"
-"oraz kompatybilnych windrukarek."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA u¿ywany jest zwykle do obs³ugi kart ethernetowych i modemów\n"
-"w laptopach. Nie jest uruchamiany, je¿eli siê go nie skonfiguruje\n"
-"a wiêc bezpiecznie mo¿e byæ instalowany nawet na maszynach, które go nie \n"
-"potrzebuj±."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper zarz±dza po³±czeniami RPC, u¿ywanymi przez protoko³y takie, jak\n"
-"NFS i NIS. Je¿eli Twoja maszyna jest serwerem dla protoko³ów, które \n"
-"wykorzystuj± RPC, nale¿y go uruchomiæ na starcie."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix to agent pocztowy (MTA),\n"
-"przesy³aj±cy pocztê miêdzy maszynami."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr "Polepsza generacjê liczb pseudolosowych."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Przypisuje \"surowe\" urz±dzenia do urz±dzeñ blokowych\n"
-"(np dysków) dla aplikacji typu Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Demon routed aktualizuje automatycznie tablicê routingu IP wykorzystuj±c\n"
-"stosowany w ma³ych sieciach protokó³ RIP. W wiêkszych sieciach stosuje\n"
-"siê bardziej z³o¿one protoko³y routingu."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokó³ rstat umo¿liwia u¿ytkownikowi sieci monitorowanie \n"
-"wydajno¶ci innych maszyn w sieci."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokó³ rusers pozwala na sprawdzanie, kto jest zalogowany na innych,\n"
-"dostêpnych maszynach w sieci."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokó³ rwho dzia³a jak who ( podaje listê u¿ytkowników) dla innych maszyn "
-"w sieci.\n"
-"które maj± w³±czony demon rwho (podobny do finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Uruchamia podsystem d¼wiêku w komputerze"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog to narzêdzie, pozwalaj±ce ró¿nym demonom na\n"
-"dokonywanie wpisów do ró¿nych plików \"dziennikowych\" ( log files).\n"
-"Jego uruchomienie jest zalecane."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "£aduje sterowniki urz±dzeñ USB."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Uruchamia serwer czcionek (konieczny do dzia³ania XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Wybierz us³ugi automatycznie uruchamiane podczas startu"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Drukarka"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Tryb pracy systemu"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcje drukarki sieciowej lpd"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Bazy danych"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "urz±dzenie"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "uruchomione"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zatrzymane"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Us³ugi i demony"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Niestety brak dodatkowych informacji\n"
-"o tej us³udze."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Przy uruchamianiu"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Status:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Reszta ¶wiata"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Dostêp do Internetu"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Programowanie"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centrum Sterowania"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interfejs sieciowy"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Nazwa serwera SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Gry"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Dla eksperta"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "niezbêdny"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalowanie pakietu %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nie mo¿na odczytaæ tablicy partycji, jest zbyt uszkodzona :(\n"
-"Mo¿na próbowaæ kontynuowaæ z pustymi partycjami"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "B³±d"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Konfiguracja poinstalacyjna"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulacje!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalacja"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "U¿ytkownicy"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatowanie plikopartycji %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Wybór pakietów"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Usuñ kolejkê"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Usuñ Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Identyfikator:"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Przetestuj mysz"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Proszê spróbowaæ ponownie"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Proszê spróbowaæ ponownie"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Powtórz has³o"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Sieæ lokalna"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Wybierz sposób pod³±czenia drukarki"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Wybierz uk³ad klawiatury."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Proszê klikn±æ na partycji"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Przetestuj mysz"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interfejs sieciowy"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Identyfikator:"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Wybierz jêzyk u¿ywania systemu"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "U¿yæ optymalizacji dysku?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "U¿yæ optymalizacji dysku?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Czekaj"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "z kó³kiem"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "z kó³kiem"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opcje modu³u:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Konfiguracja sieci"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Systemy plików"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcje"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Wska¿ port szeregowy, do którego pod³±czony jest modem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Konfiguracja sieci"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Wybierz typ myszy."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Przywróæ z dyskietki"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Wybierz typ myszy."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Inna"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalacja pakietów"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Przywróæ z pliku"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Przywróæ z pliku"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "U¿ytkownika"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/Pomo_c"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Poprzedni"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Przywróæ z pliku"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Tekst"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Wybór pakietów"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Wybierz jêzyk u¿ywania systemu"
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Wybierz jêzyk u¿ywania systemu"
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Wybierz jêzyk u¿ywania systemu"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Uszkodzony plik archiwum"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Zapisz do pliku"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Przetestuj mysz"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Wybierz pakiety do zainstalowania."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Konfiguracja sieci"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Konfiguracja sieci"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Systemy plików"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacja %s nie powiod³a siê. Wyst±pi³ nastêpuj±cy b³±d:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "nie znaleziono %s "
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Zrobione"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formatuj dyskietkê"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Przygotowywanie instalacji"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ograniczenie"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatowanie"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Oddnstalowanie pakietów"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punkt montowania"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Wybierz partycje do sformatowania"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Biuro"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Przerwij"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Drukarka"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalacja pakietów"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Wybierz plik"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Drukarka sieciowa"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Komunikat startowy"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nie wykryto w systemie karty sieciowej!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalacja"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nie wykryto w systemie karty sieciowej!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Wyj¶cie z instalacji"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Wspó³dzielenie po³±czenia z Internetem"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Wspó³dzielenie po³±czenia z Internetem jest w³±czone"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguracja wspó³dzielenia po³±czenia z Internetem zosta³a ju¿ wykonana.\n"
-"Jest teraz uaktywniona.\n"
-"\n"
-"Co chcesz zrobiæ?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "wy³±czyæ"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "zwolniæ"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rekonfigurowaæ"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Wy³±czenie serwerów..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Wspó³dzielenie po³±czenia z Internetem jest wy³±czone."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Wspó³dzielenie po³±czenia z Internetem jest wy³±czone"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguracja wspó³dzielenia po³±czenia z Internetem zosta³a ju¿ wykonana.\n"
-"Us³uga ta jest teraz wy³±czona.\n"
-"\n"
-"Co chcesz zrobiæ?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "w³±czyæ"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "W³±czenie serwerów..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Wspó³dzielenie po³±czenia z Internetem jest teraz w³±czone"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Mo¿na skonfigurowaæ komputer jako wspó³dziel±cy po³±czenie z Internetem\n"
-"Ta us³uga pozwala innym komputerom w sieci lokalnej na u¿ywanie po³±czenia\n"
-"tego komputera z Internetem.\n"
-"\n"
-"Uwaga:  wymagana jest dedykowana karta sieciowa w³±czaj±ca komputer w sieæ "
-"lokaln± (LAN)"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (modu³ %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nie wykryto w systemie karty sieciowej!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nie wykryto w systemie karty sieciowej. Proszê uruchomiæ program "
-"konfiguracji sprzêtu."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfejs sieciowy"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"W Twoim systemie istnieje tylko jedna skonfigurowana karta sieciowa:\n"
-"\n"
-"%s\n"
-"\n"
-"Mo¿na skonfigurowaæ sieæ lokaln± (LAN) przy wykorzystaniu tej karty."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Wska¿, która karta sieciowa bêdzie po³±czona\n"
-"z sieci± lokaln± (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Nie skonfigurowano monitora"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Konfiguracja sposobu uruchamiania"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Internet - konfiguracja"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP serwera CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"W bie¿±cej konfiguracji wykryto mo¿liwy konflikt adresów sieciowych: %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Wykryto konfiguracjê firewalla!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Ostrze¿enie! Zosta³a wykryta istniej±ca konfiguracja firewalla. Mo¿e byæ "
-"konieczne dokonanie kilku rêcznych poprawek po instalacji. Kontynuowaæ?"
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfiguracja..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Konfiguracja skryptów, instalowanie programów, uruchamianie serwerów..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemy z instalacj± pakietu %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Wszytko zosta³o skonfigurowane.\n"
-"Mo¿esz udostêpniaæ po³±czenie z Internetem innym komputeremw sieci lokalnej, "
-"u¿ywaj±c automatycznej konfiguracji sieci (DHCP)"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Konfiguracja wspó³dzielenia po³±czenia  zosta³a ju¿ wykonana, lecz us³uga ta "
-"jest teraz wy³±czona."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Konfiguracja wspó³dzielenia po³±czenia z Internetem zosta³a ju¿ wykonana "
-"jest w³±czona"
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Wspó³dzielenie po³±czenia z Internetem nie by³o jeszcze konfigurowane."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguracja wspó³dzielenia po³±czenia z Internetem"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Witaj w konfiguratorze wspó³dzielenia po³±czenia z Internetem!\n"
-"\n"
-"%s\n"
-"\n"
-"Wybierz Konfiguruj, by uruchomiæ kreatora.."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfiguracja sieci (%d karty)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Usuñ profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil do usuniêcia:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nowy profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nazwa komputera:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Dostêp do Internetu"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Rodzaj: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Router:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfiguracja dostêpu do Internetu..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Sterownik"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokó³"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfiguracja sieci lokalnej..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Kreator..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Zastosuj"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Proszê czekaæ... ³adowanie konfiguracji"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Po³±czony"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nie po³±czony"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Po³±cz..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Roz³±cz..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nie skonfigurowano jeszcze ¿adnego interfejsu.\n"
-"Zacznij konfiguracjê przez klikniêcie na \"Konfiguruj\""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Karta %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protokó³ uruchamiania"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Uruchamiany przy starcie"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Klient DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Uaktywnij"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Uaktywnij"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nie skonfigurowano jeszcze ¿adnego po³±czenia z Internetem.\n"
-"Rozpocznij konfiguracjê przez klikniêcie na \"Konfiguruj\""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguracja po³±czenia z Internetem"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguracja po³±czenia z Internetem"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Rodzaj po³±czenia:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametry"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Router"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Karta ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Klient DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Ustawienie poziomu bezpieczeñstwa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centrum Sterowania"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Wybór u¿ywanych narzêdzi"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "kanadyjski (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "islandzki"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "szeregowa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "u¿ycie: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wybierz uk³ad klawiatury."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Czy chcesz u¿ywaæ BackSpace zamiast Delete dla konsoli?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Zmiana CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"W³ó¿ p³ytê Installation CD-Rom do kieszeni czytnika i naci¶nij Ok.\n"
-"Je¶li jej nie masz, naci¶nij Anuluj, by omin±æ uaktualnienie."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nie mo¿na uruchomiæ uaktualnienia!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Plik/_Nowy"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Plik/_Otwórz"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Plik/Zapi_sz"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Plik/Z_apisz jako"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Plik/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcje"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcje/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/Pomo_c"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoc/O _programie"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Identyfikator:"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Komunikat startowy"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Ustawienia"
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Komputer:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Komputer:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Konfiguracja Lilo/Grub"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Narzêdzie do konfiguracji po¶rednika.\n"
-"\n"
-"Pozwala na skonfigurowanie po¶redników http oraz ftp\n"
-"z (lub bez) nazw± u¿ytkownika oraz has³em\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache oraz Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interesuj±cy"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatowanie"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Konfiguracja kolorów"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Wybierz typ myszy."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nie znaleziono serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulowaæ ¶rodkowy przycisk?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Wybierz kartê graficzn±"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Urz±dzenie startowe"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfiguracja zapory sieciowej"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfiguracja zapory sieciowej"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Zapora sieciowe\n"
-"\n"
-"Jest ju¿ skonfigurowana.\n"
-"Wybierz Konfiguruj, by zmieniæ lub usun±c jego konfiguracjê"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Zapora sieciowa\n"
-"\n"
-"Wybierz Konfiguruj, by ustawiæ standardow± zaporê sieciow±"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Wybór jêzyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Rodzaj instalacji"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Wykrywanie dysków"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguracja myszy"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Wybór klawiatury"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpieczeñstwo"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Systemy plików"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatowanie"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Wybór pakietów"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalacja pakietów"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "U¿ytkownicy"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguracja sieci"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguracja us³ug"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Program rozruchowy"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Dysk startowy"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguracja X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalacja pakietów"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Wyj¶cie z instalacji"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfiguracja zapory sieciowej\n"
-"\n"
-"Narzêdzie to umo¿liwia konfguracjê prostej zapory sieciowej.\n"
-"Je¶li potrzebujesz silnego dedykowanego rozwi±zania,\n"
-"skorzystaj z dystrybucji Mandrake Security Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Zostanie zadane kilka pytañ dotycz±cych us³ug, które chcesz\n"
-"udostêpniaæ w Internecie. Przemy¶l odpowiedzi na te pytania,\n"
-"poniewa¿ bezpieczeñstwo komputera w sieci jest wa¿ne.\n"
-"\n"
-"Pamiêtaj, wy³±cz us³ugi, z których teraz nie korzystasz.\n"
-"Mo¿esz w dowolnej chwili zmieniæ konfiguracjê powtórnie\n"
-"uruchomiaj±c ten program!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Czy uruchamiono na tym komputerze serwer WWW, który ma byæ dostêpny\n"
-"z Internetu?. Je¶li uruchomiono serwer, który ma byæ dostêpny tylko z tego\n"
-"komputera, mo¿esz spokojnie odpowiedzieæ tutaj NIE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer nazw (DNS)?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Czy chcesz umo¿liwiæ nawi±zywanie przychodz±cych po³±czeñ ssh?\n"
-"Ssh to nastêpca telneta u¿ywany do logowania. Je¶li u¿ywasz jeszcze "
-"telneta,\n"
-"nale¿y ostatecznie przej¶æ na ssh, poniewa¿ telnet nie jest szyfrowany,\n"
-"co daje mo¿liwo¶æ pods³uchania has³a i w³amania siê do systemu."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Czy chcesz umo¿liwiæ nawi±zywanie przychodz±cych po³±czeñ telnet?\n"
-"Jest to bardzo niebezpieczne, sugerujemy by odpowiedzieæ NIE\n"
-"i u¿ywaæ zamiast telneta ssh.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Czy uruchomiono dostêpny z Internetu serwer FTP?. Je¶li tak, zalecamy\n"
-"u¿ywanie go tylko do anonimowych transferów, poniewa¿ FTP tak¿e nie\n"
-"szyfruje przesy³anych hase³.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer pocztowy?. Je¶li wysy³asz pocztê\n"
-"korzystaj±c z tekstowych programów typu pine czy mutt\n"
-"serwer pocztowy prawdopodobnie jest uruchomiony.\n"
-"Je¶li nie, nale¿y zablokowaæ t± us³ugê.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Czy uruchomiono serwer POP lub IMAP? U¿ywany jest on do zdalengo\n"
-"odbioru poczty z kont pocztowych za³o¿onych na tym komputerze\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Wygl±da na to, ¿e uruchomiony jest kernel serii 2.2. \n"
-"Je¶li Twój adres IP jest przyznawany automatycznie,\n"
-"przez inny komputer w biurze lub domu nale¿y na to\n"
-"pozwoliæ. Jak jest w tym przypadku?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Czy Twój komputer synchronizuje czas z innego komputera?\n"
-"Najczê¶ciej jest to wykorzystywane w du¿ych i ¶rednich\n"
-"organizacjach do synchronizacji czasu dla logowania.\n"
-"Je¶li nie s³ysza³e¶ o tym, prawdopodobnie nie potrzebujesz\n"
-"tej us³ugi."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Zakoñczono konfiguracjê. czy zapisaæ zamiany na dysk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nie mo¿na otworzyæ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "B³±d otwarcia %s do zapisu: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Kreator konfiguracji zapory sieciowej"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Proszê czekaæ, trwa przygotowywanie instalacji"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "WWW,/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Komputer sieciowy (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Serwery NFS, SMB, SSH, oraz Proxy"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Biuro"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Stacja robocza z Gnome"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Narzêdzia do Palm Pilota lub Visior"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Stacja robocza"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Zapora sieciowa/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Serwer systemu DNS"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programy biurowe: procesory tekstu (kword, abiword), arkusze kalkulacyjne "
-"(kspread, gnumeric), przegl±darki pdf, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Dzwiêk: odtwarzacze mp3 i midi, miksery, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Podrêczniki i HOWTO o Linuksie i wolnym oprogramowaniu"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Stacja robocza z KDE"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itp"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Zestawy narzêdzi dla poczty, WWW, transferu plików i chat"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Bazy danych"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Serwery baz danych PostgreSQL lub  MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Narzêdzia u³atwiaj±ce konfiguracjê komputera"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - D¼wiêk"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Narzêdzia"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacja"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Narzêdzia dla konsoli"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Serwer pocztowy Postfix, serwer grup dyskusyjnych Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Korzystanie z Internetu"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Korzystanie z multimediów"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Konfiguracja sieci lokalnej"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Wiêcej pulpitów graficznych (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE - podstawowe ¶rodowisko graficzne wraz z zestawem towarzysz±cych narzêdzi"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "¦rodowisko graficzne"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache oraz Pro-ftpd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Narzêdzia do tworzenia i nagrywania CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Komputer biurowy"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Serwer"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programy graficzne, np. Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Biblioteki do programowania w C i C++ , programy i pliki nag³ówkowe"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Serwer sieciowy"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Pocza/Narzêdzia pracy grupowej/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Komputer do gier"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Odtwarzacze i edytory video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafika"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programy rozrywkowe: zrêczno¶ciowe, planszowe, strategiczne, itp."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Zestaw narzêdzi do czytania i wysy³ania poczty i grup dyskusyjnych (pin, "
-"mutt, tin) oraz przegl±dania sieci Web"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archiwizacja, emulatory, monitorowanie"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanse osobiste"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"¦rodowisko graficzne z przyjaznymi dla u¿ytkownika zestawami aplikacji i "
-"narzêdzi"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Programy klientów dla ró¿nych protoko³ów, w tym ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Bramka do Internetu"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy do odtwarzania/edycji d¼wiêku i video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Inne pulpity graficzne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "editory, pow³oki, narzêdzia plikowe, terminale"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy do zarz±dzania finansami, np gnucash"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Zarz±dzanie osobistymi informacjami"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Nagrywanie p³yt CD"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Stacja robocza dla naukowca"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Przerwij"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "¯aden"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Wybierz domy¶lnego u¿ytkownika:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Drukarka sieciowa"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Mo¿esz teraz okre¶liæ parametry modu³u %s."
-
-#~ msgid "Low"
-#~ msgstr "Niski"
-
-#~ msgid "Medium"
-#~ msgstr "¦redni"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Parê ulepszeñ dla tego poziomu zabezpieczeñ: wiêcej komunikatów i testów."
-
-#~ msgid "mount failed"
-#~ msgstr "nieudane montowanie"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "Boot mode"
-#~ msgstr "Tryb uruchamiania"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Dla eksperta"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux korzysta z czasu GMT \"Czas uniwersalny Greenwich\", t³umacz±c "
-#~ "go\n"
-#~ "na czas lokalny odpowiednio do wybranej strefy czasowej."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Po³±cz z Internetem"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Roz³±cz po³±czenie z Internetem"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfiguracja po³±czenia z sieci± (LAN lub Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Na który dysk chcesz przenie¶æ ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Wybierz pakiety do zainstalowania."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informacje"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Stacja robocza z Gnome"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "U¿ytkownik:"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Wybierz typ myszy."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Zakoñcz"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Automatyczne montowanie wyjmowanych dysków"
-
-#~ msgid "Active"
-#~ msgstr "Uaktywnij"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nie"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Wykryto drukarkê model \"%s\" na"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Port lokalnej drukarki"
-
-#~ msgid "Printer Device"
-#~ msgstr "Port drukarki:"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Brak nazwy urz±dzenia/pliku!"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Zdalny serwer CUPS"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Zdalny serwer CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Tryb pracy systemu"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Inna"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Wybierz uk³ad klawiatury."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Proszê klikn±æ na partycji"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Rodzaj: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Uszkodzony plik archiwum"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Konfiguracja X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Port drukarki:"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Anuluj"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Zamknij"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Otwieranie po³±czenia..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Zamykanie po³±czenia..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Po³±czenie nie zosta³o zamkniête.\n"
-#~ "Spróbuj zrobiæ to rêcznie przez uruchomienie\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "jako root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "System jest teraz roz³±czony."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Okre¶l rozmiar przeznaczony na instalacjê"
-
-#~ msgid "Total size: "
-#~ msgstr "Ca³kowity rozmiar: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Proszê czekaæ, "
-
-#~ msgid "Total time "
-#~ msgstr "Ca³kowity czas "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Wykorzystaæ istniej±c± konfiguracjê X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Do jakiego portu jest pod³±czona drukarka?\n"
-#~ "(pamiêtaj, ¿e /dev/lp0 to odpowiednik LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Uwaga, karta sieciowa zosta³a ju¿ skonfigurowana. Zostanie "
-#~ "zrekonfigurowana."
-
-#~ msgid "New"
-#~ msgstr "Nowy"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Kolejka sieciowa"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Proszê klikn±æ na partycji"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Niejednoznaczny (%s), sprecyzuj\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr "? (domy¶lnie %s)"
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Twój wybór? (domy¶lnie %s, wpisz \"none\" dla ¿adnego) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "nie mo¿na otworzyæ do odczytu /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Chcesz zrestartowaæ sieæ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Zgadzasz siê?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Nale¿y zrestartowaæ interfejs:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Nale¿y zrestartowaæ urz±dzenie %s. Zgadzasz siê?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Standardowy wybór to \"/dev/hda\", czyli pierwszy  dysk twardy (primary\n"
-#~ " IDE) lub  \"/dev/sda\" pierwszy dysk SCSI (first SCSI disk)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Czas po³±czenia:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Wybierz domy¶lnego u¿ytkownika:"
-
-#~ msgid "Spooler: "
-#~ msgstr "System wydruku: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Sprawd¼ tutaj mysz"
-
-#~ msgid "Press next to continue."
-#~ msgstr "By kontynuowaæ, naci¶nij Dalej."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Wybierz w³a¶ciwy jêzyk instalacji i u¿ywania systemu."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "By kontynuowaæ instalacjê, musisz zaakceptowaæ warunki licencji.\n"
-#~ "\n"
-#~ "\n"
-#~ "Wybierz \"Zgadzam siê\", je¶li zgadzasz siê z jej warunkami.\n"
-#~ "\n"
-#~ "\n"
-#~ "Wybierz \"Nie zgadzam siê\", je¶li siê z nimi nie zgadzasz.\n"
-#~ "Instalacja zostanie zakoñczona bez ¿adnych zmian w konfiguracji."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Wybierz odpowiedni jêzyk i uk³ad klawiatury z listy powy¿ej"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Je¶li chcesz, by po instalacji by³y dostêpne tak¿e inne jêzyki\n"
-#~ "(poza wybranym na pocz±tku instalacji), wybierz je z listy powy¿ej\n"
-#~ "Je¶li chcesz wybraæ wszystkie, wska¿ \"Wszystkie\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Wybierz:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - U¿ytkownika: Je¶li jeste¶ obeznany z Linuxem, masz mo¿liwo¶æ\n"
-#~ "     okre¶lenia zastosowania zainstalowanego systemu. Szczegó³y poni¿ej\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Ekspert: ¦wietnie znasz  GNU/Linux i chcesz zainstalowaæ go\n"
-#~ "    w nietypowy, odpowiedni dla Ciebie sposób . Podobnie jak w przypadku\n"
-#~ "    instalacji \"U¿ytkownika\" masz mo¿liwo¶æ okre¶lenia zastosowania "
-#~ "systemu\n"
-#~ "    Ale bardzo, bardzo prosimy, NIE WYBIERAJ TEJ OPCJI, JE¦LI NIE WIESZ "
-#~ "CO ROBISZ!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Teraz nale¿y okre¶liæ sposób wykorzystania komputera. \n"
-#~ "* Stacja robocza: To dokona³y wybór, je¶li u¿ywasz komputera do "
-#~ "codziennej pracy w biurze lub\n"
-#~ "  w domu.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Programowanie: wybierz tê opcjê, je¿eli chcesz korzystaæ z komputera do "
-#~ "tworzenia oprogramowania.\n"
-#~ "  Zostanie zainstalowane ca³e oprogramowanie umo¿liwiaj±ce kompilacjê , "
-#~ "debugowanie programów,\n"
-#~ "  oraz tworzenie pakietów oprogramowania.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Serwer: jest to w³a¶ciwy wybór, je¶li komputer ma byc serwerem. Mo¿e to "
-#~ "byæ serwer plików (NFS lub\n"
-#~ "  SMB ), serwer drukarek (uniksowy typu \"windowsowego\") serwer NIS, "
-#~ "serwer baz danych itp.\n"
-#~ "  Nie oczekuj zainstalowaniea ¿adnych wodotrysków typu KDE lub GNOME."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Mo¿esz teraz wybraæ grupy pakietów, które chcesz \n"
-#~ "zainstalowaæ lub aktualizowaæ\n"
-#~ "\n"
-#~ "\n"
-#~ "Instalator sprawdzi, czy masz na to do¶æ miejsca na dysku. Zostaniesz\n"
-#~ "ostrze¿ony, je¶li jest go zbyt ma³o. Je¶li postanowisz mimo to "
-#~ "kontynuowaæ,\n"
-#~ "czê¶æ mniej wa¿nych pakietów nie zostanie zainstalowana.\n"
-#~ "Na dole listy znajdziesz opcjê \"Samodzielny wybór pakietów\"; \n"
-#~ "Bêdziesz musia³ jednak wybieraæ spo¶ród ponad1000 pakietów ..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Mo¿na teraz indywidualnie wybieraæ pakiety do zainstalowania.\n"
-#~ "\n"
-#~ "\n"
-#~ "Klikniêcie w lewym rogu okna pakietów zwija lub rozwija listê pakietów\n"
-#~ "\n"
-#~ "\n"
-#~ "Klikniêcie na \"Prze³±cz miêdzy p³askim i grupowym sortowaniem\"\n"
-#~ "umo¿liwia zobaczenie pakietów posortowanych alfabetycznie\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶³i nie chcesz byæ informowany o zale¿no¶ciach miedzy pakietami,\n"
-#~ "kliknij na \"Automatyczne sprawdzanie zale¿no¶ci\". Po w³±czeniu tej "
-#~ "opcji\n"
-#~ "odznaczenie pakietu spowoduje automatyczne od innych pakietów,\n"
-#~ "które wymagaj± go do dzia³ania."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Je¶li masz wszystkie instalacyjne p³yty CD z listy powy¿ej, kliknij Ok.\n"
-#~ "Je¶li nie masz ¿adnej z tych p³yt, kliknij Anuluj.\n"
-#~ "Je¶li masz niektóre z p³yt, odznacz te, których nie masz i kliknij Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Nale¿y teraz przetestowaæ dzia³anie myszy. U¿yj przycisków oraz kó³ka\n"
-#~ "by sprawdziæ, czy ustawienia s± prawid³owe. Je¶li nie, naci¶nij \"Anuluj"
-#~ "\"\n"
-#~ "i wybierz inny sterownik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li instalujesz na komputerze Apple z 1-przyciskow± mysz±, masz teraz\n"
-#~ "mo¿liwo¶æ przypisania jaki¶ klawiszy klawiatury w celu emulacji 2 i 3 "
-#~ "przycisku\n"
-#~ "myszy. Pozwoli to na zapewnienie pe³nej funkcjonalno¶ci myszy podczas "
-#~ "pracy\n"
-#~ "na konsoli oraz w ¶rodowisku graficznym. "
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Wybierz w³a¶ciw± opcjê, by pod³±czyæ komputer do Internetu\n"
-#~ "lub sieci lokalnej. Pamiêtaj o w³±czeniu urz±dzeñ zewnêtrznych\n"
-#~ "przed wybraniem opcji, by instalator móg³ je automatycznie wykryæ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li nie u¿ywasz sieci lokalnej ani Internetu, wybierz\n"
-#~ "\"Wy³±czenie sieci\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li chcesz skonfigurowaæ sieæ po instalacji, lub zakoñczy³e¶\n"
-#~ "konfigurowanie sieci, wybierz \"Zrobione\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Nie wykryto modemu. Proszê okre¶liæ port szeregowy, do którego jest on "
-#~ "pod³±czony.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dla informacji: pierwszy port szeregowy (COM1 w Windows)\n"
-#~ "w GNU/Linux nazywa siê \"ttyS0\". "
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Nale¿y teraz podaæ opcje po³±czenia modemowego. Je¶li nie wiesz,\n"
-#~ "lub nie wiesz co wpisaæ, poprawne informacje otrzymasz od\n"
-#~ "Twojego dostawcy Internetu (ISP). Je¶li nie wpiszesz adresów DNS, zostan± "
-#~ "one pobrane od ISP\n"
-#~ "w trakcie po³±czenia."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Je¶li posiadasz zewnêtrzny modem, w³±cz go, by instalator móg³ go "
-#~ "automatycznie wykryæ."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "W³±cz modem i wybierz w³asciwy model."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Je¶li nie jeste¶ pewien, ¿e powy¿sze informacje s± prawid³owe, lub\n"
-#~ "lub nie wiesz co wpisaæ, poprawne informacje otrzymasz od\n"
-#~ "Twojego dostawcy Internetu (ISP). Je¶li nie wpiszesz adresów DNS, zostan± "
-#~ "one pobrane od ISP\n"
-#~ "w trakcie po³±czenia."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Mo¿esz teraz, podaæ nazwê hosta (je¶li trzeba).\n"
-#~ "Je¶li nie jeste¶ pewien, co wpisaæ, nale¿y uzyskaæ informacje od\n"
-#~ "Twojego dostawcy Internetu (ISP)."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Nale¿y teraz skonfigurowaæ kartê sieciow±\n"
-#~ "\n"
-#~ "   * adres IP, je¿eli go nie znasz, spytaj administratora sieci\n"
-#~ "     Nie wpisuj adresu IP, je¶li wybra³e¶ \"Automatyczne IP\".\n"
-#~ "\n"
-#~ "   * maskê sieci, \"255.255.255.0\" na ogó³ dzia³a. \n"
-#~ "      Je¿eli  nie jeste¶ pewien, spytaj administratora sieci.\n"
-#~ "\n"
-#~ "    * Automatyczne IP: Je¿eli Twoja sieæ u¿ywa protoko³u DHCP lub BOOTP,\n"
-#~ "      wybierz tê opcjê. Je¿eli nie jeste¶ pewien, spytaj administratora "
-#~ "sieci.\n"
-#~ "      W przypadku wybranie tej opcji nie nale¿y wpisywaæ adresu IP"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Mo¿esz teraz, podaæ nazwê hosta (je¶li trzeba).\n"
-#~ "Je¶li nie jeste¶ pewien, co wpisaæ, nale¿y uzyskaæ informacje od "
-#~ "administratora sieci."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Mo¿esz teraz, podaæ nazwê hosta (je¶li trzeba).\n"
-#~ "Je¶li nie jeste¶ pewien, co wpisaæ, pozostaw to pole puste."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Mo¿esz teraz podaæ opcje po³±czenia modemowego. Je¿eli ich nie znasz, \n"
-#~ "skontaktuj siê z dostawc± Internetu (ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Je¶li bêdziesz korzysta³ z serwerów po¶rednicz±cych, skonfiguruj je "
-#~ "teraz.\n"
-#~ "Je¿eli nie jeste¶ pewien, spytaj administratora sieci lub dostawcy "
-#~ "Internetu."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Mo¿esz u¿yæ pakietów kryptograficznych, je¿eli Twoje po³±czenie \n"
-#~ "z Internetem zosta³o odpowiednio skonfigurowane. Zacznij od wyboru "
-#~ "mirrora\n"
-#~ "(miejsca, sk±d bêdziesz ¶ci±ga³ pakiety) i wybierz pakiety do instalacji\n"
-#~ "\n"
-#~ "\n"
-#~ "Pamiêtaj, ¿e wybór mirrora i pakietów musi byæ zgodny z polskim prawem."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Nale¿y teraz okre¶liæ strefê czasow± miejsca, w którym mieszkasz."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Mo¿esz skonfigurowaæ drukarkê lokaln± (pod³±czonê bezpo¶rednio do\n"
-#~ "Twojego komputera), lub sieciow± (dostêpn± poprzez sieæ Unix, Netware\n"
-#~ "lub Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Je¶li chcesz mieæ mo¿liwo¶æ drukowania, wybierz system wydruku\n"
-#~ "(dostêpne s± CUPS i LPR)\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS to nowy, silny i elastyczny system wydruku dla systemów Unixowych\n"
-#~ "(CUPS oznacza \"Common Unix Printing System\"). Jest to domy¶lny system\n"
-#~ "wydruku w Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR to stary system wydruku u¿ywany w poprzednich\n"
-#~ "wersjach Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li nie u¿ywasz drukarki, wybierz \"Brak\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux obs³uguje wiele rodzajów drukarek. Ka¿da z nich wymaga\n"
-#~ "oddzielnej konfiguracji.\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li drukarka jest fizycznie pod³±czona do Twojego komputera, wybierz\n"
-#~ "\"Drukarka lokalna\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li chcesz uzyskaæ dostêp do drukarki na innym komputerze z Unixem,\n"
-#~ "wybierz \"Drukarka sieciowa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Je¶li chcesz uzyskaæ dostêp do drukarki za³o¿onej na innym komputerze\n"
-#~ "z Microsoft Windows (lub Unixie z Samb±), wybierz \"SMB/Windows 95/98/NT"
-#~ "\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Nale¿y teraz w³±czyæ drukarkê, by umo¿liwiæ instalatorowi jej wykrycie.\n"
-#~ "\n"
-#~ "Konieczne jest te¿ podanie kilku informacji.\n"
-#~ "\n"
-#~ "\n"
-#~ "...*.Nazwa drukarki: system wydruku wykorzystuje  \"lp\" jako domy¶ln± "
-#~ "drukarkê, powiniene¶ posiadaæ drukarkê\n"
-#~ "     o takiej nazwie. Jedna drukarka mo¿e mieæ wiele nazw, oddzielonych "
-#~ "znakiem '\"'\".\n"
-#~ "     Je¶li wiêc lubisz przyjazne nazwy, mo¿esz z nich korzystaæ:np. "
-#~ "\"Moja drukarka|lp\".\n"
-#~ "    Drukarka, której jedn± z nazw jest \"lp\" bêdzie drukark± domy¶ln±\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Opis drukarki jest opcjonalny, lecz u¿yteczny je¶li posiadasz wiêcej "
-#~ "drukarek, lub te¿ udostêpniasz je innym\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Lokalizacja. Je¶li chcesz podaæ informacje o po³o¿eniu drukarki,\n"
-#~ "     wpisz je tutaj (mo¿esz wpisaæ cokolwiek, np. \"Drugie piêtro\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Nale¿y wpisaæ tutaj kilka informacji.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Nazwa kolejki: system wydruku wykorzystuje  \"lp\" jako domy¶ln± "
-#~ "drukarkê, powiniene¶ posiadaæ drukarkê\n"
-#~ "     o takiej nazwie. Jedna drukarka mo¿e mieæ wiele nazw, oddzielonych "
-#~ "znakiem '\"'\".\n"
-#~ "     Je¶li wiêc lubisz przyjazne nazwy, mo¿esz z nich korzystaæ:np. "
-#~ "\"Moja drukarka|lp\".\n"
-#~ "    Drukarka, której jedn± z nazw jest \"lp\" bêdzie drukarka domy¶ln±\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Katalog bufora: jest to katalog, gdzie s± zapisywane drukowane "
-#~ "zadania. Nie zmieniaj domy¶lnego wpisu,\n"
-#~ "     je¶li nie wiesz, co wpisaæ\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Pod³±czenie drukarki. Je¶li drukarka jest fizycznie pod³±czona do "
-#~ "Twojego komputera, wybierz\n"
-#~ "     \"Drukarka lokalna\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Je¶li chcesz uzyskaæ dostêp do drukarki na innym komputerze z "
-#~ "Unixem,\n"
-#~ "     wybierz \"Drukarka sieciowa lpd\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     Je¶li chcesz uzyskaæ dostêp do drukarki za³o¿onej na innym "
-#~ "komputerze z Microsoft Windows\n"
-#~ "      (lub Unixie z Samb±), wybierz \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "     Je¶li chcesz uzyskaæ dostêp do drukarki w sieci Netware, wybierz "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Nie wykryto drukarki. Podaj nazwê portu, do którego jest pod³±czona\n"
-#~ "\n"
-#~ "\n"
-#~ "Dla informacji: wiêkszo¶æ drukarek pod³±cza siê do pierwszego portu "
-#~ "równoleg³ego\n"
-#~ "Nazywa siê on w GNU/Linuksie \"/dev/lp0\", natomiast w Windows\"LPT1\""
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Wybierz drukarkê z listy powy¿ej."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Wybierz w³a¶ciwe dla swojej drukarki opcje.\n"
-#~ "Je¶li nie wiesz, co zaznaczyæ, zapoznaj siê z dokumentacj± drukarki\n"
-#~ "\n"
-#~ "\n"
-#~ "W nastêpnym kroku bêdzie mo¿liwe sprawdzenie wybranej konfiguracji oraz "
-#~ "jej modyfikacja, je¶li wydruki nie bêd± zgodne z oczekiwaniami."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Teraz nale¿y wpisaæ has³o roota Twojego Mandrake Linux.\n"
-#~ "Has³o nale¿y wpisaæ dwa razy w celu weryfikacji poprawno¶ci\n"
-#~ "\n"
-#~ "\n"
-#~ "Root to administrator systemu, jedyny u¿ytkownik maj±cy prawo\n"
-#~ "modyfikacji konfiguracji systemu.Zwróæ wiêc szczególn± uwagê na\n"
-#~ "jego has³o! Nieautoryzowane u¿ycie konta roota mo¿e byæ skrajnie\n"
-#~ "niebezpieczne dla integralno¶ci systemu i danych oraz innych systemów,\n"
-#~ "pod³±czonych do niego.\n"
-#~ "\n"
-#~ "\n"
-#~ "Has³o powinno byæ mieszank± znaków alfanumerycznych\n"
-#~ "o d³ugo¶ci co najmniej 8 znaków. *Nigdy* nie powinno byæ\n"
-#~ "zapisywane.\n"
-#~ "\n"
-#~ "Nie wymy¶laj jednak has³a zbyt d³ugiego lub nazbyt\n"
-#~ "skomplikowanego: musisz go zapamiêtaæ bez k³opotu."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Je¶li w sieci do autentykacji stosowany jest protokó³ LDAP (lub NIS), "
-#~ "wybierz\n"
-#~ "\"LDAP\" (lub \"NIS\") jako sposób autentykacji. Je¶li nie wiesz, spytaj\n"
-#~ "administratora sieci\n"
-#~ "\n"
-#~ "Jesli komputer nie jset pod³±czony do administrowanej sieci, wskazanejest "
-#~ "wybranie \"Pliki lokalne\" jak sposobu autentykacji."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Powiniene¶ utworzyæ jedno lub wiêcej kont \"zwyk³ych\" u¿ytkowników\n"
-#~ "bêd±cych przeciwieñstwem konta \"uprzywilejowanego\" u¿ytkownika\n"
-#~ "- roota. Mo¿esz utworzyæ jedno lub wiêcej kont dla ka¿dej osoby, której\n"
-#~ "chcesz umo¿liwiæ korzystanie z komputera. Pamiêtaj, ¿e ka¿de konto ma\n"
-#~ "indywidualne ustawienia (¶rodowisko graficzne, ustawienia programów,"
-#~ "itp.)\n"
-#~ "oraz w³asny \"katalog domowy\", w których te ustawienia s± zapisywane.\n"
-#~ "\n"
-#~ "\n"
-#~ "Przede wszystkim, utwórz konto dla samego siebie!. Nawet je¶li jeste¶\n"
-#~ "jedynym u¿ytkownikiem komputera, NIE KORZYSTAJ z konta roota do\n"
-#~ "codziennej pracy: jest to bardzo ryzykowne. Czêsto zdarza siê \n"
-#~ "zniszczenie systemu przez zwyk³± literówkê\n"
-#~ "\n"
-#~ "\n"
-#~ "Powiniene¶ wiêc do normalnej pracy w systemie korzystaæ z konta\n"
-#~ "zwyk³ego u¿ytkownika, natomiast konto roota wykorzystywaæ tylko\n"
-#~ "do administracji oraz konfiguracji systemu."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Utworzenie dysku startowego jest bardzo zalecane. Je¶li nie bêdzie\n"
-#~ "mo¿na uruchomiæ komputera, bêdzie to jedyny prosty sposób\n"
-#~ "przywrócenia dzia³ania systemu bez reinstalacji."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ " G³ówne opcje LILO i Grub to:\n"
-#~ "  - urz±dzenie startowe:  urz±dzenie, które zawiera sektor ³aduj±cy\n"
-#~ "zwykle jest to \"/dev/hda\". Wybierz tak, je¿eli nie masz pewno¶ci.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Czas opó¼nienia uruchamiania domy¶lnego systemu:\n"
-#~ "okre¶la, ile czasu masz do rozpoczêcia uruchamiania domy¶lnego systemu.\n"
-#~ "Przydatne bywa w systemach, które s± tak skonfigurowane, ¿e\n"
-#~ "uruchamianie nastêpuje z twardego dysku, natychmiast po uaktywnieniu\n"
-#~ "klawiatury. Program ³aduj±cy nie czeka, je¿eli opó¼nienie jest równe "
-#~ "zero,\n"
-#~ "lub pominiesz tê opcjê,\n"
-#~ " \n"
-#~ "\n"
-#~ "  - Tryb graficzny: okre¶la tryb tekstowy VGA, który powinien byæ "
-#~ "wybrany\n"
-#~ "podczas ³adowania. Opcje to:\n"
-#~ "\n"
-#~ "    * normal: wybierz tryb 80x25.\n"
-#~ "\n"
-#~ "    * <numer>: wybierz tryb o danym numerze.  \n"
-#~ "\n"
-#~ "  - Wyczy¶æ \"/tmp\" po ka¿dym prze³adowaniu: je¶li chcesz skasowaæ\n"
-#~ " wszystkie pliki i katalogi znajduj±ce siê w \"/tmp\" po prze³adowaniu, "
-#~ "zaznacz t± opcjê.  - Okre¶l rozmiar pamiêci, je¶li trzeba; nie istnieje "
-#~ "niestety standardowa metoda\n"
-#~ "sprawdzania w BIOS-ie ilo¶ci pamiêci. W konsekwencji Linux mo¿e "
-#~ "nieprawd³owo\n"
-#~ "wykryæ wielko¶æ pamiêci RAM w twoim komputerze. Nale¿y pamiêtaæ, ¿e "
-#~ "ró¿nica\n"
-#~ "2 do 4 MB miêdzy rozmiarem pamiêci wykrytym, a rzeczywistym jest normalna."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO to program rozruchowy dla SPARC: pozwala on uruchomiæ\n"
-#~ "GNU/Linux lub inny system operacyjny, zainstalowany na twoim komputerze.\n"
-#~ "Normalnie inne systemy s± wykrywane i instalowane. Je¿eli tak nie jest,\n"
-#~ "powiniene¶ \"rêcznie\" wprowadziæ odpowiednie dane. B±d¼ ostro¿ny\n"
-#~ "i wybierz w³a¶ciwe parametry.\n"
-#~ "\n"
-#~ " \n"
-#~ "Mo¿esz oczywi¶cie równie¿ uniemo¿liwiæ dostêp do nich przy starcie "
-#~ "przez \n"
-#~ "usuniêcie ich z listy. W tej sytuacji musisz jednak posiadaæ dyskietki "
-#~ "startowe\n"
-#~ "by je uruchomiæ."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "G³ówne opcje SILO to:\n"
-#~ "  - urz±dzenie startowe:  urz±dzenie, które zawiera sektor ³aduj±cy\n"
-#~ "     Je¶li nie wiesz dok³adnie, co chcesz zrobiæ, wybierz     \"Pierwszy "
-#~ "sektor     dysku (MBR)\"\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Czas opó¼nienia uruchamiania domy¶lnego systemu:\n"
-#~ "    okre¶la, ile czasu masz do rozpoczêcia uruchamiania domy¶lnego "
-#~ "systemu.\n"
-#~ "    To przydaje siê w systemach, które s± tak skonfigurowane, ¿e     "
-#~ "uruchamianie nastêpuje z twardego dysku, natychmiast po w³aczeniu   "
-#~ "klawiatury. Program ³aduj±cy nie czeka, je¿eli opó¼nienie jest równe "
-#~ "zero,\n"
-#~ "    lub pominiesz tê opcjê."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Przyszed³ czas na konfiguracjê systemu X Window, który jest rdzeniem\n"
-#~ "GUI (graficznego interfejsu u¿ytkownika) GNU/Linuxa. W tym celu trzeba\n"
-#~ "skonfigurowaæ kartê graficzn± oraz monitor. Wiêkszo¶æ kroków jest\n"
-#~ "zautomatyzowana, tak wiêc Twoje zadanie polega na weryfikacji tego,\n"
-#~ "co zosta³o zrobione oraz akceptowaniu ustawieñ :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kiedy konfiguracja zostanie zakoñczona, X-y zostan± uruchomione\n"
-#~ "(o ile tego chcesz), by¶ mo¿na by³o sprawdziæ, czy ustawienia s± "
-#~ "odpowiednie\n"
-#~ "Je¶li nie s± w³a¶ciwe, mo¿esz siê cofn±æ i zmieniæ je, tak wiele\n"
-#~ "razy jak jest to potrzebne."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Je¿eli z konfiguracj± X-ów jest co¶ nie tak, u¿yj tych opcji,\n"
-#~ "w celu poprawnego skonfigurowania X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Je¿eli chcesz u¿ywaæ graficznego trybu przy logowaniu siê w systemie \n"
-#~ "wybierz \"Tak\". W przeciwnym wypadku wybierz \"Nie\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Mo¿esz okre¶liæ poziom bezpieczeñstwa systemu. Szczegó³owe informacje na "
-#~ "ten temat znajduj± siê w podrêczniku.\n"
-#~ "Je¶li nie wiesz co wybraæ, zachowaj domy¶lne ustawienia.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Teraz nast±pi ponowne uruchomienie systemu.\n"
-#~ "\n"
-#~ "Twój nowy Mandrake Linux zostanie za³adowany automatycznie.\n"
-#~ "Je¿eli chcia³by¶ za³adowaæ inny z posiadanych systemów operacyjnych,\n"
-#~ "przeczytaj dodatkowe instrukcje."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "czeski (programisty)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "s³owacki (programisty)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nazwa tworzonego profilu:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Zapisz /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Sformatuj wszystko"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Po sformatowaniu wszystkich partycji,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "wszystkie dane znajduj±ce siê na nich zostan± utracone"
-
-#~ msgid "Reload"
-#~ msgstr "Prze³aduj"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Czy utworzyæ dyskietkê instalacji automatycznej w celu powielenia "
-#~ "instalacji?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Konfiguracja ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Korzystaj±c z sieciowego serwera CUPS nie musisz tutaj\n"
-#~ "konfigurowaæ ¿adnych drukarek; zostan± one automatycznie\n"
-#~ "wykryte, chyba ¿e znajduje siê on w innej sieci, w tym przypadku\n"
-#~ "nale¿y podaæ adres serwera CUPS oraz opcjonalnie numer portu."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "Podaj nazwê drukarki i komentarz"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr " Kolejka sieciowa"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Tutaj mo¿na podaæ dowolne polecenie, które zostanie wykonane w "
-#~ "potokuzamiast bezpo¶redniego wys³ania wydruku do drukarki"
-
-#~ msgid "Command line"
-#~ msgstr "Polecenie"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Nale¿y wpisaæ polecenie!"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitorowanie sieci"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statystyki"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Szybko¶æ wysy³ania: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Szybko¶æ odbierania: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Czas po³±czenia:"
-
-#~ msgid "Logs"
-#~ msgstr "Logi"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Po³±czenie z Internetem"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Roz³±cz po³±czenie z Internetem"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Roz³±czenie po³±czenia powiod³o siê."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Roz³±czono."
-
-#~ msgid "Connection complete."
-#~ msgstr "Po³±czono."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Po³±czenie nie powiod³o siê. Sprawd¼ konfiguracjê w w Centrum Sterownia "
-#~ "Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "wys³ano: "
-
-#~ msgid "received: "
-#~ msgstr "odebrano: "
-
-#~ msgid "average"
-#~ msgstr "¶rednio"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Domy¶lny tryb uruchamiania"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Zawarto¶æ pliku konfiguracyjnego nie mo¿e zostaæ zinterpretowana."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Niepoprawny plik konfiguracyjny"
-
-#~ msgid "Adapter"
-#~ msgstr "Karta"
-
-#~ msgid "Disable network"
-#~ msgstr "Wy³±czenie sieci"
-
-#~ msgid "Enable network"
-#~ msgstr "W³±czenie sieci"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Mo¿na teraz przetestowaæ mysz. U¿yj przycisków i kó³ka by sprawdziæ,\n"
-#~ "czy ustawienia s± w³a¶ciwe. Je¶li nie, wybierz \"Anuluj\" by wybraæ inny\n"
-#~ "sterownik."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Po³±czenie DSL (lub ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Zamknij"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Mo¿na bezpo¶rednio podaæ URI okre¶laj±ce dostêp do drukarki w CUPS"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Tak, wydrukuj stronê testow± ascii"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Tak, wydrukuj graficzn± stronê testow±"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Tak, wydrukuj obie strony testowe"
-
-#~ msgid "Paper Size"
-#~ msgstr "Rozmiar papieru"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Wysun±æ stronê po wydruku?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcje sterownika uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcje g³êbi kolorów"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Drukowaæ tekst jako PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Usun±æ efekt schodków?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Ilo¶æ stron na stronie wydruku"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Lewy/Prawy margines w punktach (1/72 cala) "
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Górny/Dolny margines w punktach (1/72 cala)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Dodatkowe opcje GhostScriptu"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Dodatkowe opcje dla tekstu"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Odwrotna kolejno¶æ stron"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Wybierz sposób pod³±czenia drukarki sieciowej"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Przy korzystaniu z sieciowego serwera CUPS, drukarki\n"
-#~ "zostan± automatycznie wykryte, nie ma potrzeby ich konfiguracji.\n"
-#~ "W przypadku w±tpliwo¶ci, wybierz \"Sieciowy serwer CUPS\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Ka¿da drukarka wymaga nazwania (na przyk³ad lp)\n"
-#~ "Mo¿na te¿ zdefiniowaæ inne parametry jak opis drukarki lub jej "
-#~ "lokalizacjê\n"
-#~ "Jak± nazwê u¿yæ dla tej drukarki oraz w jaki sposób jest ona pod³±czona?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Ka¿da kolejka drukarki (drukuje zadanie skierowane do niej)\n"
-#~ "wymaga nazwania (czêsto lp) oraz przypisania katalogu na bufor.\n"
-#~ "Jak nazwaæ katalog przypisany do kolejki oraz jak drukarka jest "
-#~ "pod³±czona?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nazwa kolejki:"
-
-#~ msgid "Spool directory"
-#~ msgstr "Katalog bufora:"
-
-#~ msgid "Disable"
-#~ msgstr "Wy³±czyæ"
-
-#~ msgid "Enable"
-#~ msgstr "W³±czyæ"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "By zwiêkszyæ poziom bezpieczeñstwa systemu nale¿y w³±czyæ:\n"
-#~ "\"U¿yj pliku shadow\" i \"U¿yj d³ugich hase³ MD5\" "
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Je¿eli Twoja sieæ u¿ywa NIS (systemu informacji sieciowej),\n"
-#~ "wybierz \"U¿yj NIS\". \n"
-#~ "Je¿eli nie jeste¶ pewien, spytaj administratora sieci."
-
-#~ msgid "yellow pages"
-#~ msgstr "¿ó³te strony"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Konfiguracja sieci lokalnej"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 dostawcy"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 dostawcy"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Jak chcesz ³±czyæ siê Internetem?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "cannot fork: "
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Rozmiar wybranych %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Otwieranie po³±czenia..."
-
-#~ msgid "Configure..."
-#~ msgstr "Konfiguruj..."
-
-#~ msgid "Standard tools"
-#~ msgstr "Narzêdzia standardowe"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ten skrypt startowy ³aduje modu³ obs³uguj±cy mysz usb."
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Konfiguracja sposobu uruchamiania"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Po³±czenie z Internetem jest skonfigurowane.\n"
-#~ "Mo¿na skonfigurowaæ komputer jako wspó³dziel±cy po³±czenie z Internetem\n"
-#~ "Ta us³uga pozwala innym komputerom w sieci lokalnej na u¿ywanie "
-#~ "po³±czenia\n"
-#~ "tego komputera z Internetem.\n"
-#~ "\n"
-#~ "Uwaga:  wymagana jest dedykowana karta sieciowa w³±czaj±ca komputer w "
-#~ "sieæ lokaln± (LAN)\n"
-#~ "Czy chcesz konfigurowaæ wspó³dzielenie po³±czenia z Internetem?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automatyczne sprawdzanie zale¿no¶ci"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Konfiguracja LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Utwórz dysk startowy"
-
-#~ msgid "Choice"
-#~ msgstr "Wybór"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Teraz mo¿esz wybraæ ró¿ne dodatkowe opcje dla Twojego systemu.\n"
-#~ "\n"
-#~ "* U¿ywaæ optymalizacji dysku: ta opcja mo¿e zwiêkszyæ szybko¶æ twardego\n"
-#~ "dysku, ale jest opcj± tylko dla zaawansowanych u¿ytkowników: \n"
-#~ "niektóre kiepskie chipsety mog± zniszczyæ Twoje dane, b±d¼ wiêc czujny!\n"
-#~ "Kernel ma wprawdzie wbudowan± czarn± listê chipsetów, ale je¶li chcesz \n"
-#~ "unikn±æ przykrej niespodzianki, lepiej nie wybieraæ tej opcji.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Wybierz poziom bezpieczeñstwa: mo¿esz wybraæ poziom bezpieczeñstwa \n"
-#~ "dla twojego systemu. Zajrzyj do podrêcznika po szczegó³ow± informacjê,\n"
-#~ "lub po prostu,je¶li nie wiesz, co zrobiæ , wybierz \"¶redni\" ; \n"
-#~ "\n"
-#~ "\n"
-#~ "* Sprecyzuj rozmiar pamiêci, je¿eli trzeba: niestety w dzisiejszym "
-#~ "¶wiecie\n"
-#~ "pecetów nie ma standardowej metody zapytania BIOS-u o wielko¶æ pamiêci.\n"
-#~ "Tak wiêc GNU/Linux mo¿e wykryæ nieprawid³owo Twoj± pamiêæ. \n"
-#~ "W tym wypadku podaj prawid³ow± wielko¶æ\n"
-#~ "Uwaga: ró¿nica o 2 lub 4 MB jest normalna.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Automatyczne montowanie wyjmowanych dysków: Je¿eli nie chcesz\n"
-#~ "\"rêcznie\" montowaæ mediów typu CD, stacja dyskietek, Zip,\n"
-#~ "zaznacz tê opcjê\n"
-#~ "\n"
-#~ "\n"
-#~ "* Wyczy¶æ /tmp przy ka¿dym starcie systemu: zaznacz t± opcjê, je¶li\n"
-#~ "je¶li chcesz kasowaæ wszystkie pliki i katalogi zapiasane w /tmp przy \n"
-#~ "starcie systemu,\n"
-#~ "\n"
-#~ "\n"
-#~ " - W³±cz NumLock przy starcie: zaznacz t± opcjê, je¶li chcesz uaktywniæ\n"
-#~ " klawiaturê numeryczn± po stacie Uwaga : W X-ach klawisz NumLock mo¿e "
-#~ "dzia³aæ lub nie, nie uaktywniaj te¿\n"
-#~ "tej opcji w przypadku laptopów."
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Dostêp do Internetu/sieci lokalnej"
-
-#~ msgid "Mail information"
-#~ msgstr "Informacje o poczcie"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Ró¿ne"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ró¿ne pytania"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr ""
-#~ "Nie mo¿na u¿ywaæ supermount\n"
-#~ "przy ustawionym wysokim poziomie bezpieczeñstwa"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Ostrze¿enie: PRZY TYM POZIOMIE BEZPIECZEÑSTWA NIE JEST MO¯LIWE\n"
-#~ "BEZPO¦REDNIE REJESTROWANIE SIÊ Z KONSOLI NA ROOTA! \n"
-#~ "Nale¿y zarejestrowaæ siê jako zwyk³y u¿ytkownik, nastêpnie u¿yæ \"su\".\n"
-#~ "W ogólno¶ci: komputer w tej konfiguracji nadaje siê wy³±cznie na serwer.\n"
-#~ "Zosta³e¶ ostrze¿ony."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "B±d¼ ostro¿ny, uaktywnienie numlock mo¿e powodowaæ\n"
-#~ "problemy z wypisywaniem cyfr zamiast liter (np. naci¶niêcie \"p\" daje \"6"
-#~ "\")"
-
-#~ msgid "Actions"
-#~ msgstr "Czynno¶ci"
-
-# ../../share/compssUsers
-#~ msgid "Scientific applications"
-#~ msgstr "Programy naukowe"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Pierwszy serwer DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Drugi serwer DNS"
-
-#~ msgid "using module"
-#~ msgstr "u¿ycie modu³u"
-
-#~ msgid "Development, Database"
-#~ msgstr "Programowanie, bazy danych"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Programowanie, narzêdzia standardowe"
-
-#~ msgid "loopback"
-#~ msgstr "plikopartycja"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Którego programu rozruchowego chcesz u¿yæ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Dyskietka automatycznej instalacji"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Spróbowaæ wykryæ modem?"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Wy³±czenie po³±czenia z Internetem"
-
-#~ msgid "Configure local network"
-#~ msgstr "Konfiguracja sieci lokalnej"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Konfiguracja po³±czenia z Internetem / Konfiguracja sieci lokalnej"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Sieæ lokalna zosta³a ju¿ skonfigurowana.\n"
-#~ "Czy chcesz:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Skonfiguruj ponownie korzystaj±c z kreatora..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Obróbka grafiki"
-
-#~ msgid "Sciences"
-#~ msgstr "Nauki"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Rozmowy chat: (IRC lub natychamiastowa komunikacja) programy jak xchat, "
-#~ "licq, gaim, oraz narzêdzia transferu plików"
-
-#~ msgid "Communication facilities"
-#~ msgstr "U³atwienia komunikacyjne"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Narzêdzia internetowe"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Bazy danych (mysql i postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Programowanie C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Konfiguracja strefy czasowej"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Karta sieciowa 1 (eth0):"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(mo¿e byæ przyczyn± zniszczenia danych)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Uaktywnienie num lock przy starcie"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Potwierd¼ has³o:"
-
-#~ msgid "default"
-#~ msgstr "domy¶lne"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Jakie jest zastosowanie komputera?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Okre¶l rozmiar przeznaczony na instalacjê"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "U¿yj diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "U¿ytkownika"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Jeste¶ pewien, ¿e jeste¶ ekspertem? \n"
-#~ "Bêdziesz mia³ du¿e uprawnienia, co mo¿e byæ niebezpieczne.\n"
-#~ "\n"
-#~ "Bêdziesz pytany np. o \"U¿yj pliku shadow dla hase³?\n"
-#~ "Czy potrafisz odpowiedzieæ na tego typu pytania?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "U¿yj pliku shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "U¿yj hase³ kodowanych MD5"
-
-#~ msgid "Search"
-#~ msgstr "Znajd¼"
-
-#~ msgid "Package"
-#~ msgstr "Pakiet"
-
-#~ msgid "Tree"
-#~ msgstr "Drzewo"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortowanie wg"
-
-#~ msgid "Category"
-#~ msgstr "Kategoria"
-
-#~ msgid "Installed packages"
-#~ msgstr "Zainstalowane pakiety"
-
-#~ msgid "Available packages"
-#~ msgstr "Dostêpne pakiety"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Poka¿ tylko pozosta³e"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Dodaj po³o¿enie pakietów"
-
-#~ msgid "Update location"
-#~ msgstr "Po³o¿enie uaktualnieñ"
-
-#~ msgid "Remove"
-#~ msgstr "Usuñ"
-
-#~ msgid "Find Package"
-#~ msgstr "Szukaj pakietu"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Znajd¼ pakiet zawieraj±cy plik"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Prze³±cze miêdzy zainstalowanymi i dostêpnymi"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Sprawdzanie zale¿no¶ci"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Zostan± odinstalowane nastêpuj±ce pakiety"
-
-#~ msgid "Regexp"
-#~ msgstr "Wyra¿enie regularne"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Jakiego pakietu szukasz?"
-
-#~ msgid "No match"
-#~ msgstr "Nic nie pasuje"
-
-#~ msgid "No more match"
-#~ msgstr "Nic wiêcej nie pasuje"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Teraz rpmdrake zostanie ponownie uruchomiony,\n"
-#~ "aby umo¿liwiæ szukanie zbiorów."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Którego pliku szukasz?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Czego szukasz?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Podaj termin (n.p. ``extra'', ``commercial'')"
-
-#~ msgid "Directory"
-#~ msgstr "Katalog"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CD niedostêpny ( nic w katalogu /mnt/cdrom )."
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL katalogu zawieraj±cego RPM-y."
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Dla po³±czenia FTP lub HTTP musisz podaæ po³o¿enie pliku hdlist\n"
-#~ "wzglêdem adresu powy¿ej."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Wy¶lij nastêpuj±ce informacje"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s jest ju¿ u¿ywane"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Aktualizacja bazy RPM-ów."
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Zostanie usuniêta pozycja %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Znajdowanie pozosta³ych"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Znajdowanie pozosta³ych zajmie trochê czasu"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Wykryto kartê ISDN:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Inne kraje"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "W jakim kraju przebywasz?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Modem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Modem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Je¶li Tój modem to Alcatel, wybierz Alcatel, je¶li nie, wybierz ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "nie u¿ywaj pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "lokalizacja (wa¿ny)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "lokalizacja (bardzo fajny)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (przydatny)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Do którego portu szeregowego jest pod³±czona mysz?"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, biblioteki, narzêdzia"
-
-#~ msgid "Czech"
-#~ msgstr "czeski"
-
-#~ msgid "Slovakian"
-#~ msgstr "s³owacki"
diff --git a/perl-install/share/po/pt.po b/perl-install/share/po/pt.po
deleted file mode 100644
index a0f710bb1..000000000
--- a/perl-install/share/po/pt.po
+++ /dev/null
@@ -1,11403 +0,0 @@
-# DRAKX PT .PO FILE.
-# Copyright (C) 1999 MandrakeSoft
-# Andrei <andreib@zaz.com.br>, 1999-2000
-# Paulo Cardoso <paulo@ejs.is>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-03-10 19:37GMT\n"
-"Last-Translator: Jorge Costa <jorgercosta@netc.pt>\n"
-"Language-Team: Portuguese <pt@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.2\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurar todas as cabeças independentemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usar extenção Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar placa única \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuração Multi-Cabeça"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"O seu sistema suporta configuração multi-cabeça.\n"
-"O que deseja afazer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Placa Gráfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccione uma placa gráfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "servidor  X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "servidor  X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Qual a configuração do Servidor X que deseja ter?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A sua placa pode ter suporte para aceleração 3D por hardware mas só com o "
-"XFree%s.\n"
-"A sua placa é suportada pelo XFree %s que pode ter um melhor suporte para 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"A sua placa pode ter suporte para aceleração 3D por hardware com o XFree%s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s com aceleração 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A sua placa pode ter suporte para aceleração 3D por hardware com o XFree%s,\n"
-"ATENÇÃO ESTE SUPORTE É EXPERIMENTAL E PODE CONGELAR O SEU COMPUTADOR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s com aceleração 3D por hardware EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A sua placa pode ter suporte para aceleração 3D por hardware com o XFree%s,\n"
-"ATENÇÃO ESTE SUPORTE É EXPERIMENTAL E PODE CONGELAR O SEU COMPUTADOR.A sua "
-"placa é suportada pelo XFree %s que pode ter um melhor suporte para 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuração do XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione o tamanho da memória da sua placa gráfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolha as opções para o servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolha um monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dois parâmetros críticos são a taxa de refrescamento vertical, que é a taxa\n"
-"em que todo o ecrã é refrescado, e principalmente a taxa de sincronização\n"
-"horizontal, que é a taxa em que 'scanlines' são mostradas.\n"
-"\n"
-"É MUITO IMPORTANTE que não especifique um tipo de monitor com taxa de "
-"actualização\n"
-"para além das capacidades do seu monitor: pode danificar seu monitor.\n"
-" Se tiver dúvidas, escolha definições conservadoras."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Taxa de refrescamento horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Taxa de refrescamento vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor não configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Placa gráfica ainda não configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resoluções ainda não escolhidas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Quer testar a configuração?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aviso: o teste desta placa gráfica pode congelar o seu computador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Teste da configuração"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"tente alterar alguns parâmetros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocorreu um erro:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "A sair em %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Esta é a definição correcta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu um erro, tente alterar alguns parâmetros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolução"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolha a resolução e a profundidade de cor"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Placa Gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mais"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo de Perito"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostrar tudo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluções"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tipo de teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de Rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo Rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronização Horizontal do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refrescamento Vertical do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Placa Gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Placa Gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memória gráfica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidade de cor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolução: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "A preparar a configuração X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "O que deseja fazer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Alterar Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Alterar Placa Gráfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Alterar opções do Servidor"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Alterar Resolução"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar informação"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testar de novo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Sair"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Manter alterações?\n"
-"A configuração actual é:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ao iniciar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Eu posso configurar o computador para iniciar automaticamente o X após o "
-"arranque.\n"
-"Gostaria de iniciar o X quando voltar a arrancar?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Por favor volte a entrar no %s para activar a alterações"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor saía e depois utilize Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milhões de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milhões de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ou mais"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Padrão, 640x480 a 60 Hz Padrão"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatível com 8514, 1024x768 a 87 Hz entrelaçado (sem 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelaçado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Alargado, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Não-entrelaçado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA de Alta Frequência, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequência que consegue 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequência que consegue 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequência que consegue 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que consegue1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que consegue1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primeiro sector da partição de arranque"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro sector do disco (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalação do SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Onde quer instalar o carregador de arranque?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalação do LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO com menu em texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO com menu gráfico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrancar do DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Principais opções do carregador de arranque"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Carregador de arranque deve usar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalação do carregador de arranque"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (não funciona com BIOS antigas)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de Vídeo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Tempo de espera antes de arrancar na imagem padrão"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Senha"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Senha (de novo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restringir opções da linha de comando"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restringir"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Limpar /tmp a cada arranque"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tamanho da RAM preciso se necessário (%d MB encontrados)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activar multi-perfis"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Indicar o tamanho da RAM em Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opção ``Restringir opções da linha de comando'' não tem uso sem senha"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Por favor tente novamente"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "As senhas não coincidem"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensagem Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Abrir tempo de espera de Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tempo limite de Arranque do Kernel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Activar Arranque de CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Activar de Arranque?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "SO por omissão?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aqui estão a diferentes entradas.\n"
-"Pode adicionar mais ou alterar as existentes"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Pronto"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Qual tipo de entrada que quer adicionar?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imagem"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Leitura-Escrita"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Rótulo"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Por omissão"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Tamanho-Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "SemVídeo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Remover entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Não é permitido um rótulo vazio"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Tem que ter uma partição swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Este rótulo já está a ser utilizado"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interfaces %s %s encontrados"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Tem algum outro?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Tem algum interface %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Não"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sim"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ver informação do hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "A instalar o driver para %s placa %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Qual driver %s que eu deveria tentar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Em alguns casos, o driver %s precisa de informações extra para funcionar\n"
-"correctamente, mas ele normalmente funciona bem sem estas informações.\n"
-"Deseja especificar opções extras ou deixar o driver localizar na sua\n"
-"máquina as informações que ele precisa? Ocasionalmente, isso poderá\n"
-"travar o computador, mas não deve causar algum dano."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Auto-procurar"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar opções"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Agora pode definir as opções para o módulo %s.\n"
-"As opções estão no formato ``nome=valor nome2=valor2 ...''\n"
-"Para exemplo, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opções do módulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"O carregamento do módulo %s falhou.\n"
-"Quer tentar novamente com outros parâmetros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(já adicionado %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Essa senha é demasiado simples"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Por favor indique um nome de utilizador"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"O nome de utilizador deve conter apenas letras minúsculas, números, `-' e `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Este nome de utilizador já foi adicionado"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Adicionar utilizador"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduza um utilizador\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceitar utilizador"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome de utilizador"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ícone"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Eu posso configurar o computador para iniciar automaticamente o X após o "
-"arranque.\n"
-"Gostaria de iniciar o X quando voltar a arrancar?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolha o utilizador por omissão :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolha o gestor de janelas a correr:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Pode escolher outros idiomas que estarão disponíveis após a instalação"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tudo"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Adicionar um utilizador"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizado"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "A iniciar o CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Este pacote tem que ser actualizado\n"
-"Tem certeza que não o quer seleccionar?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bem-vindo à Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Padrão"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranóico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nível deve ser usado com cuidado. Ele torna o seu sistema mais fácil \n"
-"de usar, mas muito sensível: não deve ser usado numa máquina \n"
-"ligada a outras ou à Internet. Não existe acesso por senha."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"As senhas agora estão activadas, mas o uso como computador de rede ainda não "
-"é recomendado."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Esta é a segurança padrão recomendada para um computador que será usado\n"
-"para se ligar à Internet como um cliente. Agora existem verificações de "
-"segurança. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Com este nível de segurança, o uso deste sistema como um servidor tornou-se "
-"possível.\n"
-"A segurança agora está alta o suficiente para usar o sistema como um\n"
-"servidor que aceita ligações de muitos clientes. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Nós definimos características nível 4, mas agora o sistema está .\n"
-"totalmente fechado. As características de segurança estão no máximo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escolha o nível de segurança"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Opções do nível de segurança"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolha as opções para o servidor"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bem vindo ao %s o seleccionador de Sistema Operativo!\n"
-"\n"
-"Escolha um Sistema Operativo da lista acima ou\n"
-"espere %d segundos pelo arranque por omissão.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bem-Vindo ao GRUB o seleccionador de Sistema Operativo!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use a tecla %c e %c  para escolher qual a entrada seleccionada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Prima 'enter' para arrancar o SO seleccionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes de arrancar, ou 'c' para linha de comando."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"A opção seleccionada vai arrancar automaticamente dentro de %d segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "não há espaço suficiente em /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Ambiente de trabalho"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu Iniciar"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Onde quer instalar o carregador de arranque?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nenhuma ajuda implementada ainda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuração do Estilo de Arranque"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ficheiro"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ficheiro/_Sair"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>S"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor de Categorização NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Tradicional Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Iniciar Aurora no arranque"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modo yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Está correntemente a usar %s como Gestor de Arranque.\n"
-"Clique em Configurar para iniciar o assistente de configuração."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo do sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Iniciar o X-Window na inicialização"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Não, eu não quero autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sim, eu quero autologin com este (utilizador, ambiente de trabalho)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "não possível abrir /etc/inittab para leitura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Eu não posso adicionar mais nenhuma partição"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Pode escolher outros idiomas que estarão disponíveis após a instalação"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Francês"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Alemão"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grego"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norueguês"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sueco"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiano"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "série"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Por favor faça primeiro uma cópia de segurança dos seus dados"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Leia com atenção!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se planear usar aboot, lembre-se de deixar espaço livre (2048 sectores é "
-"suficiente)\n"
-"no início do disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistente"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Escolher acção"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tem uma partição FAT grande \n"
-"(normalmente utilizada pelo MicroSoft Dos/Windows.)\n"
-"Sugiro que redimensione primeiro a partição\n"
-"(clique nela, depois clique em \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Por favor clique numa partição"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalhes"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "falhou ao montar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vazio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Outro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sistema de ficheiros:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Criar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' ao invés"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Eliminar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Após alterar o tipo de partição %s, todos os dados desta partição serão "
-"perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Escolher acção"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Criar uma nova partição"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Alternar para modo perito"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Alternar para modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Anular"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Sair sem guardar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Sair sem gravar na tabela de partição?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Quer testar a configuração?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto alocar"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Limpar tudo"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detecção de discos rígidos"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Todas as partições primárias estão usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Eu não posso adicionar mais nenhuma partição"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter mais partições, por favor elimine uma para poder criar uma partição "
-"extendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Alterar tipo de partição"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Tentando resgatar tabela de partições"
-
-#: ../../diskdrake/interactive.pm_.c:297
-#, fuzzy
-msgid "Rescue partition table"
-msgstr "Tentando resgatar tabela de partições"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Alterar tipo de partição"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automontagem de Médias Amovíveis"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Seleccione ficheiro"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A tabela de partições de segurança não tem o \n"
-"mesmo tamanho. Continuar mesmo assim?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Aviso"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira uma disquete no drive\n"
-"Todos os dados na disquete serão perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentando resgatar tabela de partições"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mostrar informação"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ponto de Montagem"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opções"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mover"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Adicionar ao RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Adicionar ao LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Remover do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Remover do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Criar uma nova partição"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector inicial: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo do Sistema de Ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ponto de montagem: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferência: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "A formatar o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Alterar tipo de partição"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Que sistema de ficheiros deseja?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Onde deseja montar o ficheiro loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Onde deseja montar o dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Não posso remover a definição do ponto de montagem enquanto \n"
-"a partição for usada para loopback. Remova o loopback primeiro"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "A computar limites do sistema de ficheiros FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "A redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta partição não é redimensionável"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Deveria fazer uma cópia de segurança de todos os dados nesta partição"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Após redimensionar a partição %s, todos os dados da partição serão perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escolha o novo tamanho"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Para qual disco quer mover?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Para qual sector quer mover?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "A mover"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "A mover partição..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolha um RAID existente para adicionar a"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolha um LVM existente para adicionar a"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nome do LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Essa partição não pode ser usada para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome do ficheiro loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nome real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "O ficheiro já é utilizado por outro loopback, escolha outro"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "O ficheiro já existe. Utilizá-lo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opções do módulo:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nível"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamanho do bloco"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Tenha cuidado: essa operação é perigosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Que tipo de particionamento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Lamento, eu não aceitarei criar /boot tão distante no disco (num cilindro > "
-"1024).\n"
-"Ou usa o LILO e ele não funcionará, ou você não usa o LILO e não precisará "
-"de /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A partição que você seleccionou para adicionar como root (/) é fisicamente "
-"localizada para além\n"
-"do cilindro 1024 do disco rígido, e não possui uma partição /boot.\n"
-"Se quer usar o gestor de arranque LILO, tenha cuidado em adicionar uma "
-"partição /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Seleccionou uma partição software RAID como root (/).\n"
-"Nenhum gestor de arranque não consegue acedê-lo sem uma\n"
-"partição /boot. Tenha o cuidado de adicionar uma partição /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A tabela de partições do drive %s vai ser escrita no disco!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Precisará re-arrancar antes que as modificações tenham efeito"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Após formatar a partição %s, todos os dados desta partição serão perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "A formatar"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "A formatar o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "A formatar a partição %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid falhou"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolução: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra do drive no DOS: %s (apenas um palpite)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inicial: sector: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamanho: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindro %d ao cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Não formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Ficheiro(s) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partição de arranque por omissão\n"
-"    (para arranque do MS-DOS, não para o lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nível %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamanho do bloco %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do ficheiro loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"É provável que esta partição seja\n"
-"uma partição Driver, não lhe\n"
-"deve mexer.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta é uma partição especial\n"
-" Bootstrap serve para o \n"
-"duplo arranque do seu sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamanho: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindros, %s cabeças, %s sectores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informação: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo da tabela de partições: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no barramento %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opções: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipo do Sistema de Ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Essa senha é muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "As senhas não coincidem"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Alterar tipo de partição"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Por favor clique numa partição"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Servidor DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatação de %s falhou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Não sei como formatar %s no tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro a desmontar %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simples"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Não pode usar JFS em partições menores que 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Não pode usar ReiserFS em partições menores que 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Pontos de montagem devem começar com uma /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Já existe uma partição no ponto de montagem %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Não pode usar LVM Logical Volume para o ponto de montagem %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Esta directoria deveria permanecer dentro do sistema de ficheiros root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Precisa de um verdadeiro sistema de ficheiros (ext2, reiserfs) para este "
-"ponto de montagem\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Não pode usar LVM Logical Volume para o ponto de montagem %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Sem espaço livre suficiente para auto-alocação"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro ao abrir %s para escrita: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu um erro - nenhum dispositivo válido foi encontrado para criar novos "
-"sistemas de ficheiros. Por favor verifique no hardware a causa deste problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Não tem partições!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"O seu novo sistema operativo Mandrake Linux está ser instalado\n"
-"Essa operação deve demorar algumas minutos (isso depende do tamanho que\n"
-"escolheu para instalar e a velocidade do seu computador).\n"
-"\n"
-"\n"
-"Por favor seja paciente."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Por favor escolha \"Instalar\" caso não exista nenhuma versão anterior do "
-"Mandrake Linux\n"
-"instalado ou se deseja utilizar vários sistemas operativos.\n"
-"\n"
-"\n"
-"Por favor escolha \"Actualizar\" se desejar actualizar uma versão instalada "
-"do Mandrake Linux.\n"
-"\n"
-"\n"
-"Dependendo do seu conhecimento sobre GNU/Linux, você pode escolher um dos "
-"seguintes níveis para instalar\n"
-"ou actualizar o seu Mandrake Linux:\n"
-"\n"
-"* Recomendado: se nunca instalou um sistema GNU/Linux escolha esse. A "
-"instalação será \n"
-"  fácil e serão feitas apenas algumas perguntas.\n"
-"\n"
-"\n"
-"* Personalizado: se estiver familiarizado com o GNU/Linux, pode escolher o "
-"uso primário (estação, \n"
-"  servidor, desenvolvimento) do seu sistema. Responderá a mais perguntas do "
-"que na classe de instalação\n"
-"  \"Recomendada\", precisa então de saber com o GNU/Linux funciona para "
-"poder escolher esse nível.\n"
-"\n"
-"\n"
-"* Perito: se tem um bom conhecimento sobre o GNU/Linux, pode escolher esta "
-"classe. Como \n"
-"  na classe \"Personalizado\", poderá escolher o uso primário (estação, "
-"servidor, desenvolvimento)\n"
-"  Tenha muito cuidado antes de escolher esta classe. Poderá fazer uma "
-"instalação bastante personalizada.\n"
-"  As respostas a algumas questões que podem ser difíceis se não tiver "
-"conhecimento sobre GNU/Linux.\n"
-"  Não escolha esta classe se não souber o que está a fazer."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX tentará localizar adaptadores PCI SCSI. Se o DrakX encontrar\n"
-"um adaptador SCSI e souber qual driver a utilizar, ele será instalado\n"
-"automaticamente\n"
-"\n"
-"\n"
-"Se não possuir adaptadores SCSI, um adaptador ISA SCSI ou um PCI SCSI que\n"
-"DrakX não reconhece, será questionado sobre se algum adaptador SCSI existe "
-"no seu\n"
-"sistema. Se não existirem adaptadores, pode clicar em \"Não\". Se clicar em\n"
-"\"Sim\", uma lista de drivers aparecerá para que possa escolher o seu\n"
-"adaptador.\n"
-"\n"
-"\n"
-"Se tem que especificar manualmente o seu adaptador, DrakX perguntará \n"
-"se quer especificar opções para ele. Pode deixar que o DrakX examine o "
-"hardware\n"
-"para descobrir as opções. Isso normalmente funciona bem.\n"
-"\n"
-"\n"
-"Se não, precisará definir as opções para o driver. Por favor veja o Guia do "
-"Utilizador\n"
-"(capítulo 3, secção \"Recolhendo informações sobre o seu hardware) para "
-"dicas sobre\n"
-"como descobrir essas informações na documentação do hardware, no Web site\n"
-"do fabricante (se tiver acesso à Internet) ou no Microsoft Windows\n"
-"(se o tiver no seu sistema)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Seleccionou o(s) seguinte(s) servidor(es): %s\n"
-"\n"
-"\n"
-"Estes servidores são activados por omissão. Não possuem nenhum problema\n"
-"de segurança conhecido, mas algum novo pode ser encontrado. Neste caso, "
-"certifique-se \n"
-"da sua actualização logo que possível.\n"
-"\n"
-"\n"
-"Deseja mesmo instalar estes servidores?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Não é possível usar 'broadcast' sem algum domínio NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar esta selecção guardada de pacotes, arranque a instalação com "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro ao ler o ficheiro %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algum hardware no seu computador precisa de drivers ``proprietários'' \n"
-"para funcionar. Pode encontrar mais informações em: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Tem ter uma partição root.\n"
-"Para isso, crie uma partição (ou clique numa existente).\n"
-"Então escolha a acção ``Ponto de montagem'' e defina-a como `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Tem que ter uma partição swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Não possui uma partição swap\n"
-"\n"
-"Continuar mesmo assim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Tem que ter uma partição swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar espaço livre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usar a partição existente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Não existe nenhuma partição para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partição Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Qual partição que quer usar para o Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolha os tamanhos"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tamanho da partição root em MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tamanho da partição swap em MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espaço livre na partição Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Qual partição que quer redimensionar?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Computando limites do sistema de ficheiros do Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionador de FAT é incapaz de manipular sua partição, \n"
-"ocorreu o seguinte erro: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A sua partição Windows está muito fragmentada, corra primeiro o ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENÇÃO!\n"
-"\n"
-"Drakx vai agora redimensionar sua partição Windows. Tenha cuidado:\n"
-"esta operação é perigosa. Se o não tiver feito ainda, deve correr o\n"
-"scandisk do Windows (e opcionalmente correr o defrag) nesta partição, e\n"
-"então reiniciar a instalação. Também deveria fazer backup dos seus\n"
-"dados. Quando tiver certeza, pressione Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto de espaço quer deixar para o windows em"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partição %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falha no redimensionamento FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Não existem partições FAT para redimensionar ou para usar como loopback (ou "
-"não existe espaço suficiente)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Apagar o disco inteiro"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Remover Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tem mais de um disco rígido, em qual deles quer instalar o linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Todas as partições existentes e os dados nelas contidos serão perdidos %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Pode agora particionar %s.\n"
-"Quando terminar, não esqueça de guardar usando `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Não tem espaço livre suficiente na sua partição Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Não consigo encontrar espaço para instalação"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O assistente de particionamento DrakX encontrou as seguintes soluções:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento falhou: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "A ligar a rede"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "A desligar a rede"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocorreu um erro, mas eu não sei como lidar com ele.\n"
-"Continue a seu próprio risco."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ponto de montagem %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns pacotes importantes não foram instalados correctamente.\n"
-"O seu drive de cdrom ou o seu cdrom está defeituoso.\n"
-"Verifique o cdrom num computador instalado usando \"rpm -qpl Mandarke/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bem-vindo à %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nenhum drive de disquete disponível"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "A entrar no passo `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Seu sistema está com poucos recursos. Pode ter algum problema na\n"
-"instalação do Mandrake Linux. Se isso ocorrer, pode tentar instalar usando "
-"o\n"
-"modo texto. Para isso, prima `F1' no quadro de inicialização e escreva "
-"`text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe de Instalação"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Por favor escolha uma das seguintes classes de instalação:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"O tamanho total dos grupos que seleccionou é de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se deseja instalar menos que esse tamanho,\n"
-"seleccione a percentagem de pacotes que quer instalar.\n"
-"\n"
-"Uma baixa percentagem irá instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de 100%% irá instalar todos os pacotes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tem espaço em seu disco para apenas %d%% desses pacotes.\n"
-"\n"
-"Se desejar instalar menos que este tamanho,\n"
-"seleccione a percentagem de pacotes que quer instalar.\n"
-"Uma baixa percentagem irá instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de %d%% irá instalar o máximo de pacotes possível."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Será capaz de escolher mais precisamente no próximo passo"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentagem de pacotes a serem instalados"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selecção de Grupo de Pacotes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selecção individual de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamanho total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pacote defeituoso"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versão: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamanho: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importância: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Não pode seleccionar esse pacote pois não existe espaço livre para o instalar"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Os seguintes pacotes serão instalados"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Os seguintes pacotes serão removidos"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Não pode seleccionar/deselecionar esse pacote"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este é um pacote obrigatório, tem que ser seleccionado"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Não pode deixar de seleccionar este pacote. Ele já está instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Este pacote tem que ser actualizado\n"
-"Tem certeza que não o quer seleccionar?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Não pode deixar de seleccionar este pacote. Ele tem que ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostrar automaticamente pacotes seleccionados"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Guardar em disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Guardar selecção de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Sair da instalação"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolha os pacotes que deseja instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "A instalar"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "A estimar"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Por favor aguarde, a preparar a instalação"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacotes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "A instalar pacote %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceitar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Recusar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Troque o seu Cd-Rom!\n"
-"\n"
-"Por favor insira o Cd-Rom rotulado \"%s\" no seu drive e prima  Ok quando "
-"estiver pronto.\n"
-"Se não o tiver, prima Cancelar para evitar a instalação deste Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Houve um erro na ordenação dos pacotes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Houve um erro a instalar os pacotes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocorreu um erro"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Quer testar a impressão?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Contrato de licença"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Por favor escolha o tipo de teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aqui está a lista completa de teclados disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Que classe de instalação deseja?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalar/Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Isso é uma instalação ou actualização?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Perito"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Guardar selecção de pacotes"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porta do Rato"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Por favor escolha a que porta série o rato está ligado."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulação de botões"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulação Botão 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulação Botão 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "A configurar cartões PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "A configurar IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "sem partições disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Procurando partições para encontrar pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Escolha os pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Não consigo ler sua tabela de partição, é muito defeituosa para mim :(\n"
-"Eu posso tentar continuar limpando as partições defeituosas (TODOS OS DADOS\n"
-"serão perdidos!). A outra solução é não deixar o DrakX modificar a tabela\n"
-"de partições. (o erro é %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake falhou na leitura da tabela de partições.\n"
-"Continue por sua conta e risco!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Escolha as partições que quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partição Root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual a partição root (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Precisa reiniciar para que as modificações na tabela de partição tenham "
-"efeito"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Escolha as partições que quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Verificar blocos defeituosos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "A formatar partições"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "A criar e formatar ficheiro %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Sem 'swap' suficiente para completar a instalação, por favor adicione mais"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "A procurar pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "A procurar pacotes para actualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"O seu sistema não tem espaço suficiente para instalação ou actualização (%d "
-"> %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar da disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar da disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Selecção de Pacotes"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Guardar em disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "O tamanho seleccionado é maior que o espaço disponível"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se tiver todos os CDs da lista abaixo, clique em Ok.\n"
-"Se não tiver nenhum desses CDs, clique em Cancelar.\n"
-"Se apenas alguns CDs estiverem em falta, desmarque-os e então clique em Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom rotulado como \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "A preparar a instalação"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando o pacote %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuração pós-instalação"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira uma disquete vazia no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tem agora a possibilidade de descarregar o software para codificação "
-"(encriptação).\n"
-"\n"
-"ATENÇÃO:\n"
-"Devido a vários requerimentos aplicáveis à este software e impostos\n"
-"por várias jurisdições, o cliente e/ou o utilizador final deste software "
-"deve\n"
-"assegurar-se que as leis da sua jurisdição lhe permitem descarregar, "
-"armazenar e usar este software.\n"
-"\n"
-"Além disso, o cliente e/ou o utilizador final deve estar particularmente "
-"prevenido para\n"
-"não infringir as leis da sua jurisdição. Se o cliente e/ou o utilizador "
-"final\n"
-"não respeitar o previsto nestas leis, poder-lhe-ão ser aplicadas sérias\n"
-"sanções.\n"
-"\n"
-"Em nenhum caso irá a Mandrakesoft ou seu produtores e/ou seus fornecedores\n"
-"ser responsáveis por especiais, indirectos ou acidentais danos seja qual "
-"for\n"
-"(incluindo também mas não limitada a perda de lucros), interrupção de "
-"negócios, perda de informação\n"
-"comercial e outras perdas monetárias, e eventual endividamento e "
-"indemnização a ser\n"
-"paga, de acordo com a decisão do tribunal) saindo do uso, posse, ou do "
-"descarregamento\n"
-"isolado deste software, do qual o cliente e/ou o utilizador final pode "
-"eventualmente\n"
-"ter acesso após ter assinado o acordo presente.\n"
-"\n"
-"\n"
-"Para qualquer pergunta relacionada a esse acordo, favor entrar em contacto "
-"com: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "A contactar o 'mirror' para obter a lista de pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolha um 'mirror' de onde obter os pacotes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "A contactar o 'mirror' para obter a lista de pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Qual é o seu fuso horário?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "O seu relógio de hardware está definido GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Servidor NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nenhuma impressora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Tem algum outro?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sumário"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Rato"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuso horário"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Placa RDIS"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Placa de Som"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Placa TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Especificar senha do root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nenhuma senha"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Essa senha é muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticação?"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticação?"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autenticação NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domínio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Um disco de arranque oferece uma maneira de arrancar o Linux sem\n"
-"depender de um carregador de arranque normal. Isso é necessário se não "
-"quiser instalar\n"
-"o SILO no seu sistema, ou se outro sistema operativo remover o SILO, ou\n"
-"o se\n"
-"SILO não funcionar com o seu hardware. Um disco de inicialização também\n"
-"pode\n"
-"ser usado com uma imagem de backup do Mandrake deixando muito mais fácil\n"
-"recuperar\n"
-"um sistema com danos severos.\n"
-"\n"
-"Se você quiser criar um disco de inicialização para o seu sistema, insira um "
-"disquete\n"
-"no drive e aperte em \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primeiro drive de disquetes"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segundo drive de disquetes"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Saltar"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Uma disquete de arranque personalizada oferece uma maneira de arrancar o "
-"Linux \n"
-" sem um carregador de arranque normal. Isto é necessário se não quiser "
-"instalar\n"
-"o LILO (ou grub) no seu sistema, ou se outro sistema operativo remover\n"
-"o LILO, ou o se LILO não funcionar com o seu hardware. Uma disquete de "
-"arranque\n"
-"personalizada também pode ser usada com uma imagem de backup do Mandrake,\n"
-"tornando muito mais fácil recuperar o sistema com danos graves.\n"
-"Deseja criar uma disquete de arranque para o seu sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, nenhum drive de disquetes disponível"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolha o drive de disquetes que quer usar para criar a disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insira uma disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "A criar disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "A preparar o carregador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Quer usar o aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro ao instalar o aboot, \n"
-"tentar forçar a instalação, mesmo que isso destrua a primeira partição?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalar carregador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"A instalação do carregador de arranque falhou. Ocorreram os seguintes erros:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira uma disquete vazia no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "A criar disquete de auto-instalação"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos não estão completos.\n"
-"\n"
-"Quer realmente sair agora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-#, fuzzy
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Parabéns, a instalação está completa.\n"
-"Para informações sobre correcções para esta versão do Mandrake Linux\n"
-"consulte a Errata disponível em http://www.mandrakelinux.com/.\n"
-"\n"
-"Informação sobre como configurar o seu sistema está disponível no\n"
-"capítulo pós-instalação do Oficial Guia do Utilizador do Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Criar disquete de auto instalação"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto instalação pode ser totalmente automatizada se\n"
-"quiser, neste caso, ela tomará de conta do disco\n"
-"rígido!! (com vista a instalação em outra máquina).\n"
-"\n"
-"Pode preferir repetir a instalação.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automático"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Repetir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Guardar selecção de pacotes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalação do Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre opções  | <Espaço> selecciona | <F12> próximo passo "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu em falta"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolher acção"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avançado"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Por favor aguarde"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informação"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir Árvore"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Encolher Árvore"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Alternar entre organização plana ou em grupo"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Má escolha, tente novamente\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Sua escolha? (por omissão %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Sua escolha? (por omissão %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opções: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Quer usar o aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Sua escolha? (por omissão %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemão"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanhol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Filandês"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francês"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norueguês"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russo"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Teclado Inglês"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Teclado Americano"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armênio (velho)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armênio (máquina de escrever)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armênio (Fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbeijão (latino)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armênio (Fonético)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Búlgaro"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorusso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suíço (layout Alemão)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suíço (layout Francês)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemão (sem teclas mortas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dinamarquês"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norueguês)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniano"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (layout \"Russo\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelense"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelense (Fonético)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandês"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonês 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Teclado coreano"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino Americano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (velho)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"número de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Localização"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedónio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandês"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (layout QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (layout QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Português"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadiano (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romeno (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romeno (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Eslovaco"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbeijão (cirílico)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabela"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado Tailandês"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Tailandês"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo moderno \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Teclado Americano (Internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"número de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavo (latin/cirílico)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montagens circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Remova os volumes lógicos primeiro\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Rato - SUN"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rato Genérico PS2 com roda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botão"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Rato Genérico com 2 Botões"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Genérico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "série"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Rato Genérico com 3 Botões"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech Série CC (série)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "Série MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (serial, tipo C7 antigo)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botões"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botões"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nenhum"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nenhum Rato"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Por favor teste o rato"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para activar o rato,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVA SUA RODA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Terminar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Próximo ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Isto está correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ligar à Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"A maneira mais comum de se ligar com adsl é pppoe.\n"
-"Mas algumas ligações usam pptp, poucas usam dhcp.\n"
-"Se não sabe, escolha 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Qual cliente dhcp que deseja usar?\n"
-"Por omissão é dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nenhum adaptador de rede ethernet foi detectado no seu sistema.\n"
-"Eu não posso configurar este tipo de ligação."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolha o interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Por favor escolher o adaptador de rede que quer usar para se ligar à Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "A configurar a rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Por favor introduza o nome do seu anfitrião(se souber).\n"
-"Alguns servidores DHCP requerem o nome do anfitrião para funcionar.\n"
-"O nome do anfitrião deve ser um nome de anfitrião totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nome do anfitrião"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Assistente de Configuração da Rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Placa ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "De que tipo é sua ligação ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Configuração total (isdn4net)"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Configuração total (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuração ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione o seu provedor.\n"
-" Se não estiver na lista, escolha Não Listado"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo de Arranque"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sem Canal-D (linhas alugadas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Qual protocolo que quer usar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Qual tipo de placa tem?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Eu não sei"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se tiver uma placa ISA, os valores do próximo quadro devem estar correctos.\n"
-"\n"
-"Se tiver uma placa PCMCIA, tem que saber o irq e io da sua placa.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Qual é a sua placa ISDN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Eu detectei uma placa ISDN PCI, mas não sei qual é o tipo. Por favor "
-"seleccione uma placa PCI no próximo quadro."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nenhuma placa ISDN PCI foi encontrada. Por favor seleccione uma no próximo "
-"quadro."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Por favor escolha a que porta série o seu modem está ligado."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opções de ligação"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome da ligação"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Número do telefone"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de Login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Baseado em script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Baseado em terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome do domínio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primeiro DNS Servidor (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Second DNS Server (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua ligação."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Pode reconfigurar sua ligação."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Está neste momento ligado à Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode ligar à Internet ou reconfigurar sua ligação."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Não está neste momento ligado à Internet."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Ligado"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Desligar..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configurar rede"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Ligação e configuração da Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua ligação."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Pode desligar ou reconfigurar a sua ligação."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuração da Rede"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Por que está a fazer uma instalação em rede a sua rede já está configurada.\n"
-"Clique em OK para manter a configuração, ou Cancelar para reconfigurar a sua "
-"ligação Internet & Rede.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bem-Vindo ao Assistente de Configuração da Rede\n"
-"\n"
-"Estamos preparados para configurar a sua ligação de rede/Internet.\n"
-"Se não quiser usar a auto-detecção, desmarque a opção.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolha o perfil a configurar:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar auto-detecção"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "A detectar dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Ligação normal via modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado na porta %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Ligação ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectado %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Ligação à LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectado no interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Ligação por Cabo"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "ligação por cabo detectada"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Ligação à LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "placa(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolha a ferramenta que deseja usar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Ligação à Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Quer iniciar a sua ligação ao iniciar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuração da Rede"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ocorreu um problema ao reiniciar a rede: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Parabéns. A configuração da rede e da Internet acabou.\n"
-"\n"
-"A configuração será agora aplicada ao seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Depois de completado, recomendamos que reinicie o seu \n"
-"ambiente X para evitar o problema da troca de nome do anfitrião."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVISO: Esse dispositivo já foi configurado para ligar à Internet.\n"
-"Apenas aceite manter este dispositivo configurado.\n"
-"A modificação dos campos abaixo irá sobrepor esta configuração."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Por favor introduza a configuração IP para esta máquina.\n"
-"Cada item deve ser introduzido como endereço IP ponteado-decimal\n"
-"(por exemplo, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "A configurar dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Endereço IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP Automático"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "O endereço IP deve estar no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Por favor introduza o nome do seu anfitrião.\n"
-"O nome do anfitrião deve ser um nome de anfitrião totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com'' .\n"
-"Também pode introduzir o endereço IP de um gateway se tiver um"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuração de proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "O proxy deve ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuração da Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Quer tentar ligar-se à Internet agora?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "A testar a sua ligação..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "O sistema está agora ligado à Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por razões de Security, será desligado(a) agora."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"O sistema não aparenta estar ligado à Internet.\n"
-"Tente reconfigurar a sua ligação."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuração da Ligação"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Por favor preencha ou verifique os campos abaixo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ da Placa"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memória da Placa (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO da Placa"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_O da Placa"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 da Placa"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "O seu número de telefone pessoal"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (ex: provedor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Número do telefone do provedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolha o seu teclado"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de marcação"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de Ligação:"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de Ligação:"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Nome do utilizador da conta"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Senha da conta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "falhou ao montar: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partição extendida não é suportada nesta plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Tem um buraco na sua tabela de partições e eu não a posso usar.\n"
-"A única solução é mover as suas partições primárias para ter o buraco "
-"próximo das partições extendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "A restauração pelo ficheiro %s falhou: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro ao escrever no ficheiro %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Algo mau está acontecer no seu drive. \n"
-"O teste que verifica a integridade dos dados falhou. \n"
-"Isso significa que escrever algo no disco resultará em lixo aleatório."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "obrigatório"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muito bom"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bom"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "talvez"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora da rede (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de Impressão"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Erro ao escrever no ficheiro %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(módulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP do servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Por omissão)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccionar Ligação da Impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Como está a impressora ligada?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Com um servidor CUPS remoto, não tem que configurar\n"
-"nenhuma impressora aqui; elas serão detectadas automaticamente.\n"
-"Se tiver dúvidas, seleccione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuração"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "O endereço IP deve estar no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O número da porta deve ser numérico"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuração do Estilo de Arranque"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "A detectar dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Usar auto-detecção"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detectado %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Por favor escolha a que porta série o seu modem está ligado."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "A instalar pacote %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "A instalar pacote %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opções da impressora lpd Remota"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para usar uma fila de impressão lpd remota, precisa indicar\n"
-"o nome do anfitrião e o servidor de impressão e o nome da\n"
-"fila naquele servidor."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do anfitrião remoto"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do anfitrião remoto"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do anfitrião remoto"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opções de Impressão SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir numa impressora SMB, precisa indicar o nome do \n"
-"anfitrião SMB (Nota! Ele pode ser diferente do anfitrião TCP/IP!) e \n"
-"possivelmente o endereço IP do servidor de impressão, como também\n"
-" o nome de partilha para a impressora que deseja aceder e qualquer \n"
-"informação aplicável sobre nome de utilizador, senha e grupo de trabalho."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Anfitrião servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome de partilha"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de trabalho"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opções de Impressão NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir numa impressora NetWare, precisa indicar o\n"
-"nome do servidor de impressão NetWare (Nota: ele pode ser diferente\n"
-"do servidor TCP/IP!) como também o nome da fila de impressão para a "
-"impressora\n"
-"que deseja aceder como qualquer nome de utilizador e senha aplicável."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de Impressão"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome da Fila de Impressão"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opções da Impressora 'Socket'"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir numa impressora 'socket', precisa indicar o \n"
-"nome do servidor da impressora e a número da porta (opcional)."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nome do Servidor da impressora"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nome do Servidor da impressora"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome da impressora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descrição"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Localização"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Isto está correcto?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Ligação da Impressora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Qual tipo de impressora que tem?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Quer testar a impressão?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Sim, imprimir ambas as páginas de teste"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Padrão"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A(s) página(s) foi(foram) enviada(s) para o demónio de impressão.\n"
-"Pode demorar algum tempo antes da impressão começar.\n"
-"Estado da impressão:\n"
-"%s\n"
-"\n"
-"Está a funcionar correctamente?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A(s) página(s) foi(foram) enviada(s) para o demónio de impressão.\n"
-"Pode demorar algum tempo antes da impressão começar.\n"
-"Está a funcionar correctamente?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Fechar"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "A desligar a rede"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "A desligar a rede"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opções da impressora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-#, fuzzy
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"O nome da impressora deve apenas conter letras, números e 'underscore' '_'"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "A iniciar a sua ligação..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor não configurado"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "A configurar a rede"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranóico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Seleccionar Ligação da Impressora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Que sistema de impressão deseja usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "A instalar pacote %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opções da impressora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Deseja configurar uma impressora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aqui estão as seguintes filas de impressão.\n"
-"Pode adicionar mais ou modificar as existentes."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aqui estão as seguintes filas de impressão.\n"
-"Pode adicionar mais ou modificar as existentes."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo Normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Quer testar a configuração?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Quer testar a configuração?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Ligação à Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Ligação da Impressora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "A imprimir página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Quer testar a configuração?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Quer testar a impressão?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuração de Proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bem vindo ao utilitário de configuração de proxy.\n"
-"\n"
-"Aqui, poderá definir as proxies http e ftp\n"
-"com ou sem utilizador e palavra-passe\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Por favor preencha as informações da proxy para http\n"
-"Deixe em branco se não deseja uma proxy para http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porta"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "O Url deve começar com 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "A parte da porta deve ser numérica"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Por favor preencha as informações da proxy para ftp\n"
-"Deixe em branco se não deseja uma proxy para ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "O Url deve começar com 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Por favor introduza o utilizador e palavra-passe para proxy, se existir.\n"
-"Deixe em branco se não desejar utilizador/palavra-passe"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "utilizador"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "palavra-passe"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "reintroduza a palavra-passe"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "As palavras-passe não coincidem. Tente novamente!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Não é possível adicionar partição ao RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Não possível escrever o ficheiro %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid falhou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid falhou (talvez as raidtools estejam em falta?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Sem partições suficientes para RAID nível %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Inicia o sistema de som ALSA (Advanced Linux Sound Architecture) "
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, um calendarizador de comando periódicos"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd é usado para monitorizar o estado da bateria e registando-o via "
-"syslog.\n"
-"Pode ser usado também para desligar a máquina quando a bateria estiver fraca."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa comandos agendados pelo comando at na hora especificada quando\n"
-"at foi executado, e executa comandos em grupo de comandos quando o uso de "
-"memória estiver suficientemente baixo."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron é um programa UNIX padrão que executa programas especificados pelo\n"
-"utilizador em horas marcadas. vixie cron adiciona várias características ao "
-"UNIX\n"
-"cron básico, incluindo melhor segurança e melhores opções de configuração."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adiciona suporte de rato a aplicações Linux em modo de texto\n"
-"tal como o Midnight Commander. Permite também copiar e colar utilizando\n"
-"o rato e inclui suporte para menus pop-up na consola."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"O HardDrake sonda o hardware, e opcionalmente\n"
-"configura hardware novo ou alterado."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache é um servidor World Wide Web. Ele é usado para servir ficheiros\n"
-"HTML e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O demónio (daemon) Internet superserver(normalmente chamado inetd) inicia\n"
-"uma variedade de outros serviços de Internet quando necessário. É "
-"responsável\n"
-"pela inicialização de vários serviços, incluindo telnet, ftp, rsh e rlogin. "
-"Desactivando o inetd, todos os serviços pelos quais é responsável \n"
-"também são desactivados."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Inicie o filtro de pacotes para Linux kernel 2.2, para criar \n"
-"uma firewall afim de proteger a sua máquina de ataques de rede."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este pacote carrega o mapa de teclado seleccionado como\n"
-"definido em /etc/sysconfig/keyboard. Isto pode ser seleccionado usando o\n"
-"utilitário kbdconfig. Deve deixar isto activado para a maioria da máquinas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regeneração automática do 'kernel header' em /boot \n"
-"para /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detecção e configuração automática de hardware no arranque."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"O Linuxconf irá por vezes executar várias tarefas\n"
-"no arranque para manter a configuração do sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd é o demónio de impressão obrigatório para o lpr funcionar "
-"correctamente.\n"
-"Ele é basicamente um servidor que controla os trabalhos para a(s) impressora"
-"(s)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, usado para criar um servidor de alta\n"
-"desempenho e disponibilidade."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) é um Servidor de Nome de Domínio (DNS) que é usado para\n"
-"transformar nomes de servidores em endereços IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta todos os pontos de montagem do Network File\n"
-"System (NFS), SMB (Gestor de Rede/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva todas os interfaces de rede configurados para iniciar\n"
-"no arranque."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS é um protocolo popular usado na partilha de ficheiros através\n"
-"de redes TCP/IP. Esse serviço oferece a funcionalidade do servidor NFS, que "
-"é configurado através do ficheiro /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS é um protocolo popular usado na partilha de ficheiros através de redes\n"
-"TCP/IP. Esse serviço oferece a funcionalidade de bloquear ficheiros NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticamente ligar o teclado numérico na consola\n"
-"e XFree no arranque."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Suporte a OKI 4w e 'winprinters' compatíveis."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suporte PCMCIA é utilizado normalmente para suportar coisas como\n"
-"ethernet ou modems em portáteis. Ele não será iniciado a não ser que seja "
-"configurado de maneira que\n"
-"seguro estar instalado em máquinas que não precisem dele."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper gere ligações RPC, que são usadas por\n"
-"protocolos como NFS ou NIS. O servidor portmap tem que estar a correr nas "
-"máquinas\n"
-"que actuarão como servidores para os protocolos que utilizam o mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix é um Agente de Transporte de Correio, um programa\n"
-"que move mensagens de correio de uma máquina para outra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda e restaura o 'entropy pool' do sistema para melhor qualidade\n"
-"na geração aleatória de números."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Designa dispositivos 'raw' a dispositivos de bloco (como \n"
-"partições de disco duro), para o uso de aplicações como Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O demónio routed permite a actualização automática da tabela IP Router\n"
-"através do protocolo RIP. Enquanto o RIP é usado largamente em pequenas\n"
-"redes, protocolos de 'routing' mais complexos são necessários em redes mais "
-"complexas."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protocolo rstat permite que utilizadores da rede recebam\n"
-"informações sobre a performance de qualquer máquina naquela rede."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers permite que os utilizadores de uma rede identifiquem\n"
-"quem está registado (logged) noutras máquinas que respondam."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que utilizadores remotos obtenham uma lista de "
-"todos os\n"
-"utilizadores registados (logged) numa máquina a correr o demónio rwho "
-"(similar ao finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Iniciar o sistema de som na sua máquina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog é uma capacidade que muitos demónios usam para registar mensagens\n"
-"em vários ficheiros de registo. É uma boa ideia correr sempre o syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega os driver para os seus dispositivos usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia o Servidor X Font (essencial para o XFree funcionar)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolha quais os serviços que devem ser inicializados automaticamente na "
-"altura do arranque"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Modo do sistema"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opções da impressora lpd Remota"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Base de Dados"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Serviços"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "a correr"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serviços e demónios"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Não há informação adicional\n"
-"sobre este serviço, lamento."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ao arrancar"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Estado:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resto do mundo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Acesso Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimédia - Gráficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolvimento"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centro de Controlo"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interface de rede"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Anfitrião servidor SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jogos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Perito"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "A instalar pacote %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Eu não consigo ler sua tabela de partições, é demasiado defeituosa\n"
-"para mim. Tentarei continuar limpando as partições defeituosas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuração pós-instalação"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuração do Estilo de Arranque"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Parabéns!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Adicionar um utilizador"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "A formatar o ficheiro loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selecção de Pacotes"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Remover entrada"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Remover Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Nome de utilizador"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Por favor teste o rato"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Por favor tente novamente"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Por favor tente novamente"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "reintroduza a palavra-passe"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Ligação à LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Seleccionar Ligação da Impressora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Por favor escolha o tipo de teclado."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Por favor clique numa partição"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Por favor teste o rato"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nome de utilizador"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Detecção de discos rígidos"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Nome de utilizador"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opções do módulo:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuração da Rede"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Configurar sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opções"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Por favor escolha a que porta série o seu modem está ligado."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configuração da Rede"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Outro"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizado"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Estado:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Personalizado"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Próximo ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Escolha os pacotes a serem instalados"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Por favor escolha o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "A detectar dispositivos..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Por favor teste o rato"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Por favor escolha os pacotes que quer instalar."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuração da Rede"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuração da Rede"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuração"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Configurar sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "A Instalação do %s falhou. Ocorreram os seguintes erros:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Pronto"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "A preparar a instalação"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "restringir"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatar partições"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuração LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ponto de Montagem"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Escolha as partições que quer formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Escritório"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Abortar"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impressora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Seleccione ficheiro"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impressora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Mensagem Init"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nenhum adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nenhum adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Sair da instalação"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Partilha da Ligação à Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "A Partilha da Ligação à Internet está activa"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuração da Partilha da Ligação à Internet já foi feita.\n"
-"Está neste momento activa.\n"
-"\n"
-"O que deseja fazer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "libertar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "A desactivar servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Partilha da Ligação à Internet está agora desactivada."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "A Partilha da Ligação à Internet está actualmente desactivada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuração da Partilha da Ligação à Internet já foi feita.\n"
-"Está neste momento desactivada.\n"
-"\n"
-"O que deseja fazer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "A activar servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Partilha da Ligação à Internet está agora activa."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Estás prestes a configurar o seu computador para partilhar a Ligação à "
-"Internet.\n"
-"Com esta capacidade, outros computadores na sua rede local poderão usar a "
-"ligação à Internet deste computador\n"
-"\n"
-"Nota: necessita de um Adaptador de Rede dedicado para configurar uma Rede de "
-"Área Local (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (a usar módulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nenhum adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nenhum adaptador de rede foi encontrado no seu sistema. Por favor execute a "
-"ferramenta de configuração de hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Existe apenas um adaptador de rede configurado no seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Estou prestes a configurar a sua Rede de Área Local com esse adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Por favor escolha qual adaptador de rede que estará ligado a sua Rede de "
-"Área Local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor não configurado"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuração do Estilo de Arranque"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuração da Internet"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencial conflito de endereços de LAN encontrado na configuração actual de %"
-"s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Configuração de firewall detectada!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Aviso! Uma configuração de firewall existente foi detectada. Pode necessitar "
-"de configuração manual depois da instalação."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "A configurar..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "A configurar scripts, a instalar software, iniciando servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas a instalar o pacote %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tudo foi configurado.\n"
-"Pode agora partilhar a sua Ligação à Internet com outros computadores na sua "
-"Rede Local, usando a configuração de rede automática (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A configuração já foi feita, mas está actualmente desactivada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A configuração já foi feita, e está actualmente activa."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nenhuma Partilha da Ligação à Internet foi alguma vez configurada."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuração da Partilha de Ligação à Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bem-Vindo ao utilitário de Partilha da Ligação à Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Clique em Configurar para iniciar o assistente de configuração."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuração de Rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Eliminar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a eliminar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acesso Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar Acesso à Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar Rede de Área Local."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistente..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor aguarde... A aplicar a configuração"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Ligado"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Não ligado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Ligar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desligar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Não tem nenhum interface configurado.\n"
-"Para configurar primeiro clique em 'Configurar'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo de Arranque"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado ao arrancar"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Activo"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Activo"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Não tem nenhuma ligação à Internet.\n"
-"Crie uma clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuração da Ligação à Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuração da Ligação à Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de Ligação:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parâmetros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Placa Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Opções do nível de segurança"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de Controlo"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolha a ferramenta que deseja usar"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadiano (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandês"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "série"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [teclado]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Por favor escolha o tipo de teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Deseja que o BackSpace funcione como Delete na consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Troque de  CD-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor insira o CD-Rom de Instalação no seu drive e prima OK quando "
-"estiver pronto.\n"
-"Se não o tiver, prima Cancelar para evitar a actualização directa."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Não é possível iniciar actualização directa!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Mostrar apenas para este dia"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ficheiro/_Novo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ficheiro/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Ficheiro/_Guardar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Ficheiro/Guardar _Como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Ficheiro/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opções"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opções/Teste"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ajuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Sobre..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nome de utilizador"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "mensagens"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "pesquisa"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Uma ferramenta para monitorizar os seus logs"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Configuração"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "correspondência"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mas não há correspondência"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Escolha ficheiro"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendário"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Conteudo do ficheiro"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "aguarde por favor, a analisar ficheiro: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuração leve"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bem vindo ao utilitário de configuração de proxy.\n"
-"\n"
-"Aqui, poderá definir as proxies http e ftp\n"
-"com ou sem utilizador e palavra-passe\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Serviços"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "A formatar"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuração da Internet"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Guardar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Por favor escolha o tipo de rato."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nenhum usb_série encontrado\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Deseja emulação de 3 botões?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Seleccione uma placa gráfica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo de arranque"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuração de firewalling"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuração de firewalling"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Já configurou a firewalll.\n"
-"Clique em Configurar para alterar ou remover a firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Clique em Configurar para configurar uma firewall padrão"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolha a seu idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Seleccione a classe da instalação"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecção de discos rígidos"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar rato"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolha o seu teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Segurança"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Configurar sistemas de ficheiros"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar partições"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Escolha os pacotes a serem instalados"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Adicionar um utilizador"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar serviços"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalar carregador de arranque"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Criar um disco de arranque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Sair da instalação"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configurador do tinyfirewall\n"
-"\n"
-"Configura uma firewall pessoal para esta máquina Linux Mandrake.\n"
-"Para uma firewall poderosa e dedicada, por favor procure a \n"
-"distribuição especializada MandrakeSecurity Firewall"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Está a correr um servidor de nomes nesta máquina? Se não definiu \n"
-"um para enviar informações de IP e zona a toda a Internet por favor \n"
-"responda não.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Deseja autorizar ligações Secure Shell (ssh) recebidas do exterior? \n"
-"Isto é um substituto de telnet que pode utilizar para efectuar o login.\n"
-"Se estiver a utilizar telnet agora, deve mudar para ssh. telnet não é \n"
-"encriptado -- possibilitando o roubo da sua palavra-passe se o usar\n"
-"ssh é encriptado e não autoriza este 'eavesdropping'."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Deseja autorizar ligações telnet recebidas do exterior?\n"
-"Isto é muito inseguro, como já explicamos. Nós recomendamos\n"
-"vivamente responder Não aqui e usar ssh em vez de telnet.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Está a correr um servidor FTP aqui que necessita que esteja acessível na\n"
-"Internet? Se estiver, recomendamos que apenas o utilize para transferências\n"
-"Anónimas. Quaisquer palavras-passe enviadas por FTP podem ser roubadas,\n"
-" uma vez que o FTP também não utiliza encriptação para palavras-passe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Está a correr um servidor de correio aqui? Se está a enviar a si \n"
-"mensagens através do pine, mutt ou outro cliente de correio base-\n"
-"ado em texto provavelmente está. De outra forma deveria remover \n"
-"o firewall para isto.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Esta a correr um servidor POP OU IMAP aqui? Isto seria\n"
-"usado para albergar contas de correio não baseadas na web\n"
-"para pessoas via esta máquina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Aparentemente está a correr um kernel 2.2.  Se o seu IP de \n"
-"Rede é automaticamente definido por um computador na sua \n"
-"casa ou escritório (dinamicamente atribuído), necessitamos \n"
-"permitir isto. É este o caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"O seu computador está a sincronizar a hora com outro computador?\n"
-"Isto é usado por maioritariamente por organizações Unix/Linux médias-\n"
-"grandes para sincronizar a hora para registos e assim. Se não faz parte \n"
-"de um grande escritório e nunca ouviu falar disto, provavelmente não \n"
-"estará."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuração completa.  Posso escrever estas mudanças no disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Não é possível abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Não é possível abrir %s para escrita: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configuração de firewalling"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Por favor aguarde, a preparar a instalação"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computador de Rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, Servidor SMB, Servidor Proxy, Servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Escritório"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estação de Trabalho Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot ou Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estação de Trabalho"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Servidor de Nome do Domínio e Informação de Rede"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de Escritório: texto (kword, abiword), folhas de cálculo (kspread, "
-"gnumeric), visualizadores pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ferramentas para audio: reprodutores mp3 ou midi, misturadores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livros e Howto's sobre o Linux e Software Livre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estação de Trabalho KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de ferramentas para correio electrónico, news, web, transferência "
-"de ficheiros e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Base de Dados"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de Bases de Dados PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ferramentas para facilitar a configuração do seu computador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - Som"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitários"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentação"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas de terminal"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix servidor de correio, Inn servidor de news "
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estação de Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estação Multimédia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuração"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mais Ambientes de Trabalho Gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, o ambiente gráfico básico com a colecção de "
-"ferramentas que o acompanham"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente Gráfico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para criar e gravar CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estação de Trabalho de Escritório"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Aplicações para gráficos como o The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"C e C++ bibliotecas de desenvolvimento, programas e ficheiros 'include'"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Computador de Rede Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estação de Jogo"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reprodutores de Vídeo e editores"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimento: arcade, tabuleiros, estratégia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de ferramentas para ler e enviar correio electrónico e news (pine, "
-"mutt, tin...) e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivo, emuladores, monitorização"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanças Pessoais"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Um ambiente gráfico com um conjunto de aplicações e ferramentas de ambiente "
-"de trabalho fáceis de usar"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para diferentes protocolos incluindo ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Gateway Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Aplicações de som e vídeo reprodução/edição"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros Ambientes de Trabalho Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, linhas de comando, ferramentas de ficheiro, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para gerir as suas finanças, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestão de Informações Pessoais"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - Gravação de CDs"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estação de Trabalho Científica"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Abortar"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Pronto"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Escolha o utilizador por omissão :"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Impressora remota"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Agora pode indicar as opções para o módulo %s."
-
-#~ msgid "Low"
-#~ msgstr "Baixo"
-
-#~ msgid "Medium"
-#~ msgstr "Médio"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Alguns melhoramentos para este nível de segurança, o principal é \n"
-#~ "que existem mais avisos e testes de segurança."
-
-#~ msgid "mount failed"
-#~ msgstr "falhou ao montar"
-
-#~ msgid "Boot mode"
-#~ msgstr "Modo de arranque"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Perito"
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Ligar à Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Desligar da Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configurar ligação de rede (LAN ou Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Para qual disco quer mover?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Por favor escolha os pacotes que quer instalar."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informação"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Estação de Trabalho Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "autenticação"
-
-#~ msgid "user"
-#~ msgstr "utilizador"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Por favor escolha o tipo de rato."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Sair"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Automontagem de Médias Amovíveis"
-
-#~ msgid "Active"
-#~ msgstr "Activo"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Não"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Uma impressora, modelo \"%s\", foi detectado no(a) "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Dispositivo de Impressora Local"
-
-#~ msgid "Printer Device"
-#~ msgstr "Dispositivo da Impressora"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Servidor CUPS remoto"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Servidor CUPS remoto"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Modo do sistema"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Outro"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Por favor escolha o tipo de teclado."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Por favor clique numa partição"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipo: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Ficheiro de cópia de segurança defeituoso"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Configurar X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Dispositivo da Impressora"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Cancelar"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Fechar"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "A iniciar a sua ligação..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "A fechar a sua ligação..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "A ligação não está fechada.\n"
-#~ "Tente fazê-lo manualmente executando\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "como root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "O sistema está agora desligado."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Escolha o tamanho que deseja instalar"
-
-#~ msgid "Total size: "
-#~ msgstr "Tamanho total:"
-
-#~ msgid "Please wait, "
-#~ msgstr "Por favor aguarde, "
-
-#~ msgid "Total time "
-#~ msgstr "Tempo total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Usar a configuração existente para o X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "A que dispositivo a sua impressora está ligada \n"
-#~ "(note que /dev/lp0 é equivalente a LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "Aviso, o adaptador de rede já está configurado. Vou reconfigurá-lo."
-
-#~ msgid "New"
-#~ msgstr "Novo"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Fila remota"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Por favor clique numa partição"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambiguidade (%s), seja mais preciso\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (por omissão %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Sua escolha? (por omissão %s introduza `nenhum' para nenhum) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "não possível abrir /etc/sysconfig/autologin para leitura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Deseja reiniciar a rede"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Concorda?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Estou pronto a reiniciar o dispositivo de rede:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Estou pronto para reiniciar o dispositivo de rede %s. Concorda?"
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipo de Ligação:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolha o utilizador por omissão :"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Teste aqui o rato."
-
-#~ msgid "What type of printer do you have?"
-#~ msgstr "Qual tipo de impressora que tem?"
-
-#~ msgid "Do you want to test printing?"
-#~ msgstr "Quer testar a impressão?"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Agora pode testar seu rato. Use os botões e a roda para\n"
-#~ "verificar se as configurações estão correctas. Se não estiverem, pode "
-#~ "clicar\n"
-#~ "em \"Cancelar\" e escolher outro driver."
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Para ter um sistema mais seguro, deve escolher \"Usar ficheiro shadow\"\n"
-#~ "e \"Usar senhas MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se a sua rede usa NIS, seleccione \"Usar NIS\". Se não sabe, pergunte\n"
-#~ "ao seu administrador de rede."
-
-#~ msgid "yellow pages"
-#~ msgstr "páginas amarelas"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 do provedor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 do provedor"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Ligação DSL (ou ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "Escolha"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Você pode directamente especificar o URI para aceder à impressora com CUPS"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Sim, imprimir página de teste ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Sim, imprimir página de teste PostScript"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Sim, imprimir ambas as páginas de teste"
-
-#~ msgid "Paper Size"
-#~ msgstr "Tamanho do Papel"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ejectar página após trabalho de impressão?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opções do driver Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opções da profundidade de cor"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Imprimir texto como PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Corrigir texto com stair-stepping?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Número de páginas por páginas de saída"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Margem Direita/Esquerda em pontos (1/72 de polegada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Margem Superior/Inferior em pontos (1/72 de polegada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opções extras de GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opções extras de Texto"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverter a ordem das páginas"
-
-#~ msgid "Reading CUPS drivers database..."
-#~ msgstr "Lendo banco de dados de drivers do CUPS"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccionar ligação de impressora remota"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Com um servidor CUPS remoto, não tem que configurar\n"
-#~ "nenhuma impressora aqui; elas serão detectadas automaticamente.\n"
-#~ "Se tiver dúvidas, seleccione \"Servidor CUPS remoto\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impressora precisa de um nome (por exemplo\n"
-#~ "lp). Outros parâmetros, tal como a descrição da impressora ou sua\n"
-#~ "localização podem ser definidas. Qual nome que deve ser usado para \n"
-#~ " esta impressora e como a impressora está ligada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada fila de impressão (à qual as impressões são dirigidas) precisa\n"
-#~ "de um nome (normalmente lp) e de uma directoria de spool associada.\n"
-#~ "Qual o nome e a directoria que devem ser utilizados para esta fila?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome da fila de impressão"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directoria de spool"
diff --git a/perl-install/share/po/pt_BR.po b/perl-install/share/po/pt_BR.po
deleted file mode 100644
index ec0a82624..000000000
--- a/perl-install/share/po/pt_BR.po
+++ /dev/null
@@ -1,12055 +0,0 @@
-# DRAKX PT_BR PO FILE.
-# Copyright (C) 2000 MandrakeSoft
-# Andrei Bosco Bezerra Torres <andreibt@uol.com.br>, 1999-2000
-# Bruno Dorfman Buys <brunobuys@zipmail.com.br>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-20 23:55GMT -2\n"
-"Last-Translator: Bruno Dorfman Buys <brunobuys@zipmail.com.br>\n"
-"Language-Team: Portugues\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurar todas as cabeças independentemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usar extensão Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar apenas placa \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuração multi-cabeça"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Seu sistema suporta configuração de cabeça múltipla.\n"
-"O que você quer fazer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Placa Gráfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Selecione uma placa gráfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor  X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolha um servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Servidor  X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Qual configuração do XFree você quer ter?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Seu placa suporta aceleração hardware 3D mas apenas com o XFree %s.\n"
-"Sua placa é suportada pelo XFree %s que pode ter melhor suporte 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sua placa suporta aceleração hardware 3D com o XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s com aceleração hardware 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Seu placa suporta aceleração hardware 3D com o XFree %s,\n"
-"NOTE QUE O SUPORTE É EXPERIMENTAL E PODE TRAVAR O SEU COMPUTADOR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s com aceleração hardware 3D EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Seu placa suporta aceleração hardware 3D mas apenas com o XFree %s,\n"
-"NOTE QUE O SUPORTE É EXPERIMENTAL E PODE TRAVAR O SEU COMPUTADOR.\n"
-"Sua placa é suportada pelo XFree %s que pode ter melhor suporte 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuração do XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Selecione o tamanho da memória de sua placa gráfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolha as opções do server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolha um monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dois parâmetros críticos são a taxa de atualização vertical, que é a taxa\n"
-"em que toda a tela é atualizada, e principalmente a taxa de sincronização\n"
-"horizontal, que é a taxa em que scanlines são mostradas.\n"
-"\n"
-"É MUITO IMPORTANTE que você não especifique um tipo de monitor com taxa de "
-"atualizaçã\n"
-"que é muito além das capacidades do seu monitor: você pode danificar seu "
-"monitor.\n"
-" Se tiver dúvida, escolha características conservadoras."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Taxa de atualização horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Taxa de atualização vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor não configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Placa gráfica ainda não configurado"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resoluções ainda não escolhidas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Você quer testar a configuração?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Atenção: testar essa placa gráfica pode travar o seu computador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Testar configuração"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"tente mudar alguns parâmetros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocorreu um erro:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saindo em %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "É essa a configuração correta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu um erro, tente mudar alguns parâmetros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolução"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolha a resolução e número de cores"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Placa Gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mais"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo Avançado"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostrar tudo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluções"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Estilo do teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo do Mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo do mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronização Horizontal do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Atualização Vertical do Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Placa Gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identificação de Placa Gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memória gráfica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Número de cores: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolução: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Driver XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparando configuração X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "O que você quer fazer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Mudar Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Mudar Placa Gráfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Mudar opções do Server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Mudar Resolução"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar informação"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testar de novo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Sair"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Manter alterações?\n"
-"A configuração atual é:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ao iniciar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Eu posso fazer seu computador automaticamento iniciar no X após a\n"
-"a inicialização. Você gostaria de iniciar o X quando reiniciar?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Favor relogar em %s para ativar as mudanças"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Favor fazer um log out (sair) e então usar as teclas Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milhões de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 bilhões de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ou mais"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Padrão, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatível com 8514, 1024x768 a 87 Hz entrelaçado (sem 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelaçado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Extendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Não-entrelaçado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA de Alta Frequência, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequência que pode fazer 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequência que pode fazer 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequência que pode fazer 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que pode fazer 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que pode fazer 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primeiro setor da partição de boot"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro setor do drive (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalação do SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Onde você quer instalar o gerenciador de inicialização?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalação do LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO com menu de texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO com menu gráfico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Inicialização pelo DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Principais opções do gerenciador de inicialização"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Gerenciador de inicialização a ser usado"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalação do gerenciador de inicialização"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de boot"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (não funciona em BIOS antigas)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de Vídeo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Tempo antes de entrar na imagem padrão"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Senha"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Senha (de novo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restringir opções da linha de comando"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restrito"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Limpar /tmp a cada inicialização"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Especifique o tamanho da RAM se necessário (%d MB encontrados)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Permitir vários perfis"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Dar o tamanha da RAM em Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opção ``Restringir opções da linha de comando'' não tem uso sem senha"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Favor tentar novamente"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "As senhas não conferem"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensagem Inicial"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Delay do firmware aberto"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tempo de espera do boot do kernel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Permitir CD Boot?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Permitir OF Boot?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "SO padrão?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aqui estão as entradas diferentes.\n"
-"Você pode adicionar mais ou modificar as existentes."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Adicionar"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Pronto"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Qual tipo de entrada você quer adicionar"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Rótulo"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Tamanho do Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Sem vídeo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Remover entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Não é permitido rótulo vazio"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Você deve especificar uma imagem de kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Você deve especificar uma partição root"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Esse rótulo já está sendo utilizado"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interfaces %s %s encontradas"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Você tem alguma outra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Você tem alguma interface %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Não"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sim"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ver informação do hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando driver para placa %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Qual driver %s eu deveria tentar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Em alguns casos, o driver %s precisa de informações extra para funcionar\n"
-"corretamente, mas ele normalmente funciona bem sem essas informações. Você\n"
-"gostaria de especificar opções extras ou deixar o driver localizar na sua\n"
-"máquina as informações que ele precisa? Ocasionalmente, isso poderá travar\n"
-"o computador, mas não deve causar nenhum dano."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Auto detectar"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar opções"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Agora você pode prover as opções para o módulo %s.\n"
-"As opções estão no formato ``nome=valor nome2=valor2 ...''\n"
-"Para instância, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opções do módulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Falha carregando módulo %s.\n"
-"Você quer tentar novamente com outros parâmentros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "Acesso a programas X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "Acesso a ferramentas rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "Permitir \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "Acesso a arquivos administrativos"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(já adicionado %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Essa senha é muito simples"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Favor dar um nome de usuário"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"O nome do usuário deve conter apenas letras minúsculas, números `-' e `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Esse usuário já foi adicionado"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Adicionar usuário"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Entre com o usuário\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceitar usuário"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome do usuário"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ícone"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Eu posso configurar o seu computador para automaticamente logar um usuário.\n"
-"Se você não quiser utilisar esta função, clique em \"Cancelar\"."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolha o usuário:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolha o gerenciador de janelas para ele:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Você pode escolher outros idiomas que estarão disponíveis após a instalação"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tudo"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Permite todos os usuários"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizada"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Sem compartilhamento"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "O pacote %s precisa ser instalado. Você deseja instalá-lo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Você pode exportar usando SAMBA ou NFS. Qual deles você quer"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Pacote obrigatório %s faltando"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Carregar Userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"O compartilhamento por usuário usa o grupo \"fileshare\".\n"
-"Você pode usar o userdrake para adicionar um usuário neste grupo."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bem-vindo à Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Padrão"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranóico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Esse nível deve ser usado com cuidado. Ele faz o seu sistema mais fácil de "
-"usar,\n"
-"mas muito sensível: ele não deve ser usado em uma máquina conectada a "
-"outros\n"
-"ou à internet. Não existe acesso por senha."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"As senhas agora estão ativadas, mas o uso como computador de rede ainda não "
-"é recomendado."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Esse é a segurança padrão recomendada para um computador que será usado\n"
-"para se conectar à Internet como um cliente. Agora existe checagens de "
-"segurança. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Com esse nível de segurança, o uso desse sistema como um servidor se tornou "
-"possível.\n"
-"A segurança agora está alta o suficiente para usar o sistema como um "
-"servidor\n"
-"que aceita conexão de muitos clientes. "
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baseado no nível anterior, mas agora o sistema está totalmente fechado.\n"
-"As características de segurança estão no máximo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escolha nível de segurança"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Nível de segurança"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Use lbsafe para servidores"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Uma livraria que defende contra ataques de buffer overflow e strings de "
-"format"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bem-vindo ao %s, o selecionador de sistema operacional!\n"
-"\n"
-"Escolha um sistema operacional da lista acima ou\n"
-"aguarde %d segundos para entrar no sistema padrao.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bem-vindo ao GRUB o selecionador de sistema operacional!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use as teclas %c e %c para selecionar a entrada que quiser."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pressione entrar para entrar no SO selecionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes da inicializacao, ou 'c' para linha de comando."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"A inicializacao da entrada selecionada ocorrera automaticamente em %d "
-"segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "sem espaco suficiente em /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu Iniciar"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Você não pode instalar o carregador de boot em uma %s partição\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ajuda ainda não implementada.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuração do estilo de inicialização"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Arquivos"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Arquivo/Sai_r"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>R"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Categorizamento NewStyle de Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor Tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ Tradicional"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Executar Aurora na inicialização"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modo yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Você  está utilizando o %s como gerenciador de inicialização.\n"
-"Clique em Configurar para abrir o auxiliar de configuração."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo do sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Executar o sistema X-Window na inicialização"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Não, eu não quero autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sim, eu quero autologin com esse (usuário, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "não foi possívek abrir /etc/inittb para leitura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Não posso fazer screenshots antes de particionar"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshots estarão disponíveis depois da instalação em %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "França"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Bélgica"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "República Tcheca"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemanha"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grécia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Noruega"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suécia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Itália"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Áustria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Estados Unidos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Favor primeiro fazer um backup de seus dados"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Ler com atenção!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se você planejar usar aboot, lembre-se de deixar espaço livre (2048 setores "
-"é suficiente)\n"
-"no início do disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Ajudante"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Escolher ação"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Você tem uma grande partição fat\n"
-"(normalmente utilizada pelo MicroSoft Dos/Windows.)\n"
-"Eu sugiro você a primeiro redimensionar a partição\n"
-"(clique nela, depois clique em \"Redimensinar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Favor clicar em uma partição"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalhes"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vazio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Outro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sistema de arquivo:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Criar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' ao invés"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Deletar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Após alterar o tipo da partição %s, todos os dados desta partição serão "
-"perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Escolher partição"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Escolher outra partição"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Sair"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Mudar para modo expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Mudar para modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Desfazer"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Sair sem salvar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Sair sem gravar na tabela de partição?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Você quer salvar as modificações /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto alocar"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Limpar tudo"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informação de discos rigidos"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Todas as partições primárias estão sendo usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Eu não posso adicionar mais nenhuma partição"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter mais partições, favor deletar uma para poder criar uma partição "
-"extendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Gravar tabela de partição"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Restaurar tabela de partição"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Recuperar tabela de partição"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Recuperar tabela de partição"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Auto-montagem da mídia removível"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selecione arquivo"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"O backup da tabela de partição não tem o mesmo tamanho\n"
-"Ainda continuar?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Aviso"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira um disquete no drive\n"
-"Todos os dados no disquete serão perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentando resgatar tabela de partição"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Mostrar informação detalhada"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ponto de Montagem"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opções"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mover"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Adicionar ao RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Adicionar ao LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Remover do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Remover do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Criar uma nova partição"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Setor inicial: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamanho em MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo do Sistema de Arquivos: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ponto de montagem: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferência: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Remove o arquivo de loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mudar tipo de partição"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Qual sistema de arquivos você quer?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Mudando de ext2 para ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Onde você quer montar o arquivo loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Onde você quer montar o dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Não posso desmacar o ponto de montagem enquanto a partição for\n"
-"usada para loop back. Remova o loopback primeiro"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Computando limites do sistema de arquivo fat"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta partição não é redimensionável"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Você deveria fazer backup de todos os dados desta partição"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Após redimensionar a particão %s, todos os dados da partição serão perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escolha o novo tamanho"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Novo tamanho em MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Qual disco você quer mover?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Setor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Qual setor você quer mover?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Movendo"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Movendo partição..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolha um RAID existente para adicionar"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolha um LVM existente para adicionar"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nome LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Essa partição não pode ser usada para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome do arquivo loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dê um nome de arquivo"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Arquivo já utilizado por outro loopback, escolha outro"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Arquivo já existe. Utilizá-lo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opções de montagem"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Vários"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nível"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamanho do bloco"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Tenha cuidade: essa operação é perigosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Qual tipo de particionamento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Desculpe, eu não aceitarei criar /boot tão distante do driver (em um cilindo "
-"> 1024).\n"
-"Ou você usa LILO e ele não funcionará, ou você não usará LILO e você não "
-"precisará de /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A partição que você selecionou para adicionar como root (/) é fisicamente "
-"localizada além\n"
-"do cilindro 1024 do disco rígido, e você não possui uma partição /boot.\n"
-"Se você quer usar o gerenciador de inicialização LILO, não esqueça "
-"deadicionar uma partição /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Você selecionou uma partição software RAID como root (/).\n"
-"O gerenciador de inicialização não consegue acessá-lo sem uma\n"
-"partição /boot. Então não esqueça de adicioná-la"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A tabela de partição do drive %s está para ser gravada no disco!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Você precisará reiniciar antes que as modificações tenham efeito"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Após formatar a partição %s, todos os dados desta partição serão perdidos"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatando"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatando arquivo loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatando partição %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Esconder arquivos"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Mover arquivos para nova partição"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Diretório %s já contém alguns dados\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Movendo arquivos para a nova partição"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copiando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Removing %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Partição %s agora chama-se %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra do drive no DOS: %s (apena um palpite)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Iniciar: setor: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamanho: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s setores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindro %d ao cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Não formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback file(s):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partição de inicialização padrão\n"
-"    (para inicialização do MS-DOS, não para o lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nível %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamanho do bloco %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do arquivo loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"É provável que está partição seja uma\n"
-"partição Driver, você provavelmente\n"
-"não deveria mexer nela.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Essa partição especial\n"
-"Bootstrap é para o\n"
-"boot-duplo do seu sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamanho: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindros, %s cabeças, %s setores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informação: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo da tabela de partição: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no barramento %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opções: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Chave criptográfica do sistema de arquivos"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Escolha a sua chave criptográfica do sistema de arquivos"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Essa chave é muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "As chaves criptográficas não conferem"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Chave criptográfica"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Chave criptográfica (de novo)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Mudar tipo"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Favor clicar em uma mídia"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Servidores de busca"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatação de %s falhou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Eu não sei como formatar %s no tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck falhou sem código de saída %d ou sinal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simples"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Você não pode usar JFS em partições menores que 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Você não pode usar ReiserFS em partições menores que 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Pontos de montagem devem começar com uma /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Já existe uma partição no ponto de montagem %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Você não pode usar um Volume Lógivo LVM para o ponto de montagem %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Esse diretório deveria permanecer dentro do sistema de arquivo root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Você precisa de um verdadeiro sistema de arquivo (ext2, reiserfs) para esse "
-"ponto de montagem\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Você não pode usar um sistema de arquivos criptografado como ponto de "
-"montagem %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Sem espaço livre suficiente para auto-alocação"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nada a fazer"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro abrindo %s para gravação: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu um erro - nenhum dispositivo válido foi encontrado para criar novos "
-"sistema de arquivos. Favor checar seu hardware para a causa desse problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Você não tem nenhuma partição!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux é um sistema multiusuário, e isto significa que cada usuário pode "
-"ter suas\n"
-"próprias preferências, seus próprios arquivos, e assim em diante. Você pode "
-"ler o \n"
-"``Guia do Usuário'' para aprender mais. Mas, ao contrário do \"root\", que é "
-"o administrador \n"
-"do sistema, os usuários a serem adicionados não terão direito a modificar "
-"nada, a não \n"
-"ser seus próprios arquivos e suas próprias configurações. Você deverá criar "
-"ao menos uma conta regular para você mesmo. Embora seja muito prático logar "
-"como \"root\" todo \n"
-"dia,  também pode ser muito perigoso! O menor engano pode significar que o "
-"seu sistema\n"
-"não funcionará mais. Se você comete um engano sério como usuário regular, "
-"você \n"
-"somente perde informação, e não o sistema inteiro.\n"
-"\n"
-"Primeiro você deve entrar o seu nome real. Isto não é obrigatório, é claro "
-"-\n"
-"porque você pode entrar, na verdade, o que você quiser. DrakX irá, depois, "
-"pegar a \n"
-"primeira palavra que você digitou na caixa e colocar como \"User\n"
-"name\". Este é o nome que este usuário específico irá usar paralogar no "
-"sistema. \n"
-"Você pode mudá-lo. Depois você deverá entrar uma senha. Uma\n"
-"senha de usuário não privilegiado (regular) não é tão crucial\n"
-"quanto a de \"root\", do ponto de vista da segurança, mas isto não é razão "
-"para\n"
-"negligenciar esta senha, pois afinal, são os seus arquivos que estão lá.\n"
-"\n"
-"Se você clicar em \"Aceitar usuário\" você poderá depois adicionar quantos "
-"quiser.\n"
-"Adicione um usuário para cada um dos seus amigos: seu pai, ou sua irmão, "
-"por\n"
-"exemplo. Depois que terminar de adicionar os usuários, selecione \"Feito\".\n"
-"\n"
-"Clicando em \"Avançado\"  permite que você mude o  \"shell\"\n"
-"default para aquele usuário (bash por default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Acima estão listadas as partições Linux detectadas no\n"
-"seu disco rígido. Você pode manter as opções feitas pelo o ajudante, elas "
-"são\n"
-"boas para o uso diário. Se você quiser alterar essas opções, você deve ao\n"
-"menos definir uma partição (\"/\"). Não escolhe uma partição muito pequena "
-"ou você\n"
-"não será capaz de instalar software suficiente. Se você quiser guardar seus "
-"dados em\n"
-"uma partição separada, você precisa escolher uma \"/home\" (apenas possível "
-"se você\n"
-"tiver mais de uma partição Linux disponível).\n"
-"\n"
-"Nota: cada partição é listada da seguinte forma: \"Nome\", \"Capacidade\".\n"
-"\n"
-"\n"
-"\"Nome\" é codificado da seguinte maneira: \"tipo do disco rígido\", "
-"\"número\n"
-"do disco rígido\", \"número da partição\" (por exemplo, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipo do disco rígido\" é \"hd\" se seu disco rígido for IDE e \"sd\"\n"
-"se ele for um disco rígido SCSI.\n"
-"\n"
-"\n"
-"\"Número do disco rígido\" é sempre uma letra depois de \"hd\" ou \"sd\".Com "
-"discos rígidos IDE:\n"
-"\n"
-"   * \"a\" significa \"disco rígido mestre na controladora IDE primária\",\n"
-"\n"
-"   * \"b\" significa \"disco rígido escravo na controladora IDE primária\",\n"
-"\n"
-"   * \"c\" significa \"disco rígido mestre na controladora IDE secundária"
-"\",\n"
-"\n"
-"   * \"d\" significa \"disco rígido escravo na controladora IDE secundária"
-"\",\n"
-"\n"
-"\n"
-"Com discos rígidos SCSI, um significa \"disco rígido primário\", um \"b\" "
-"significa \"disco rígido secundário\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"O instalador do Linux Mandrake está espalhado em diferentes CD-ROMS. O "
-"DrakX\n"
-"sabe se um pacote selecionado está localizado em outro CD-ROM e irá ejetar\n"
-"o CD-ROM atual e pedir para você inserir o CD-ROM necessário."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Agora você deverá especificar quais programas você deseja instalar no seu\n"
-"sistema. Existem milhares de pacotes disponíveis para o Mandrake Linux, e\n"
-"você não precisa conhecê-los todos de cabeça.\n"
-"\n"
-"Se você está fazendo uma instalação padrão por CD-ROM, você primeiro\n"
-"será questionado sobre que CDs você tem (somente em modo expert). Confirme\n"
-"os nomes dos CDs e cheque as caixas de diálogo correspondentes aos CDs\n"
-"que você tem disponíveis. Clique \"OK\" quando estiver pronto para "
-"continuar.\n"
-"\n"
-"Os pacotes estão separados em grupos correspondendo a um uso particular\n"
-"da sua máquina. Os grupos estão organizados em quatro sessões:\n"
-"\n"
-" * \"Workstation\": Se você planeja usar sua máquina como estação de "
-"trabalho, selecione\n"
-"um ou mais dos grupos correspondentes.\n"
-"\n"
-" * \"Development\": Se a máquina será usada para programação, escolha o\n"
-"grupo desejado(s).\n"
-"\n"
-" * \"Server\":  se a máquina será um servidor, você poderá escolher\n"
-"quais dos serviços mais comuns você deseja instalar na\n"
-"máquina.\n"
-"\n"
-" * \"Graphical Environment\": finalmente, este é onde você irá escolher seu\n"
-"ambiente gráfico preferido. Pelo menos um tem que ser selecionado, se você "
-"quer\n"
-"ter uma estação de trabalho gráfica!\n"
-"\n"
-"Movendo o mouse em cima de um nome de grupo irá mostrar uma pequena "
-"explicação\n"
-"sobre o grupo. Se você não selecionar nenhum grupo enquanto faz\n"
-"uma instalação regular (em oposição a um upgrade); um diálogo irá aparecer\n"
-"propondo um tipo diferente de instalação mínima:\n"
-"\n"
-" * Irá instalar o mínimo necessário para ter um sistema linux rodando,\n"
-"em linha de comando somente.\n"
-"\n"
-" * Instalar o sistema básico e mais os aplicativos básicos\n"
-"\n"
-" * Instalar os pacotes mínimos necessários para ter um ambiente gráfico\n"
-"\n"
-"Você pode checar a caixa \"Selecão individual de pacotes\", que é útil se\n"
-"você está familiarizado com os pacotes sendo oferecidos ou se você deseja\n"
-"ter total controle sobre o que será instalado.\n"
-"\n"
-"Se você começou a instalação em modo \"Upgrade\", você pode des-selecionar "
-"todos os\n"
-"grupos para evitar instalar qualquer pacote novo. Isto é útil para reparar "
-"ou atualizar\n"
-"um sistema já existente."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalmente, dependendo da sua escolha em selecionar ou não pacotes "
-"individuais,\n"
-"você será levado a uma árvore contendo todos os pacotes classificados por "
-"grupos\n"
-"e subgrupos. Navegando na árvoerer, você poderá selecionar grupos inteiros, "
-"sub\n"
-"grupos ou pacotes individuais.\n"
-"\n"
-"Quando você seleciona um pacote individual na árvore, uma breve descrição "
-"aparecerá\n"
-"à direita. Quando a sua seleção estiver concluída, clique \"Install\" , que\n"
-"irá iniciar a isntalação. Dependendo da velocidade do seu hardware e do "
-"número\n"
-"de pacotes  a serem instalados, poderá levar algum tempo. Uma estimativa de "
-"tempo\n"
-"necessário é mostrada na tela, para ajudá-lo a pensar se há tempo para uma "
-"xícara\n"
-"de café.\n"
-"\n"
-"!! Se um pacote de servidor foi selecionado, intencionalmente, ou por ser "
-"parte de um\n"
-"grupo, você será instado a confirmar que realmente deseja estes servidores "
-"instalados.\n"
-"No Mandrake Linux quaisquer servidores instalados serão iniciados por "
-"default no boot.\n"
-"Mesmo se eles são seguros e não possuem quaisquer dúvidas a respeito quando "
-"da\n"
-"distribuição do pacote, é possível que brechas de segurança hajam sido "
-"descobertas\n"
-"depois que esta versão do Mandrake Linux foi concluída. Se você não sabe o "
-"que um\n"
-"certo serviço faz, ou porque está sendo instalado, clique em \"No\". "
-"Clicando em  \"Yes\"\n"
-"irá automaticamente instalar os serviços listados e eles serão iniciados "
-"automaticamente\n"
-"por default.\n"
-"\n"
-"A opção \"Dependências automáticas\" simplesmente desabilita a caixa de "
-"diálogo\n"
-"de aviso que aparece quando o instalador automaticamente seleciona um "
-"pacote. Isto\n"
-"ocorre porque ele determina que é necessário satisfazer uma dependência com "
-"outro\n"
-"pacote para completar a instalação corretamente.\n"
-"\n"
-"O pequeno ícone de disco floppy no fim da lista permite carregar uma lista "
-"de pacotes\n"
-"escolhidos durante uma instalação prévia. Clicando neste ícone você poderá "
-"inserir\n"
-"um disco removível criado previamente no fim de uma instalação. Veja a "
-"segunda dica\n"
-"do último passo para criar um floppy assim."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Se você deseja conectar seu computador à internet, ou a uma rede local,\n"
-"por favor escolha a opção correta. Por favor, desligue seu dispositivo, "
-"antes de fazer a escolha certa para deixar o DrakX detectá-lo "
-"automaticamente.\n"
-"\n"
-"MandrakeLinux propõe a configuração de uma conexão à internet durante a "
-"instalação\n"
-"do sistema. As opções disponíveis são modem tradicional, conexão ADSL, cable "
-"modem,\n"
-" e finalmente, LAN (Ethernet).\n"
-"\n"
-"Aqui nós não iremos detalhar cada configuração. Apenas certifique-se de que "
-"você tem\n"
-"todas as informações de seu Provedor de Internet ou administrador do "
-"sistema.\n"
-"\n"
-"Você pode consultar o capítulo do manual sobre conexões de internet para "
-"mais detalhes\n"
-"sobre a conexão, ou simplesmente esperar até que o sistema esteja instalado "
-"e usar o\n"
-"programa descrito para configurar sua conexão.\n"
-"\n"
-"Se você deseja configurar a rede mais tarde, depois da instalação ou se você "
-"terminou\n"
-"de configurar sua conexão de rede, clique \"Cancelar\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Você agora pode escolher quais serviços você quer que iniciem na hora da "
-"inicialização.\n"
-"\n"
-"Aqui estarão todos os serviços disponíveis na instalação atual. Reveja "
-"cuidadosamente e desabilite aqueles que não sõa sempre necessários durante a "
-"inicialização.\n"
-"\n"
-"Quando você colocar o mouse sobre um item, um pequeno balão de ajuda\n"
-"aparecerá descrevendo a função do serviço. Quando você não tiver certeza se "
-"um \n"
-"serviço é útil ou não, é seguro manter o comportamento default.\n"
-"\n"
-"Tenha muito cuidado nesse passo, pois se você pretende usar sua máquina como "
-"um servidor:\n"
-"você provavelmente vai querer que serviços indesejados não sejam iniciados.\n"
-"Favor lembrar que vários serviços podem ser perigosos se foram habilitados "
-"em um\n"
-"servidor. Em geral, selecione apenas os serviços que você realmente precisa."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"O GNU/Linux gerencia o tempo em GMT (Tempo Médio de Grenwich) e traduz\n"
-"em tempo local de acordo com o fuso horário que você escolheu. Contudo, é "
-"possível \n"
-"desativá-lo, deselecionando \"Relógio do hardware configurado para GMT\", de "
-"forma que \n"
-"o relógio do hardware seja o mesmo do relógio do sistema. Isto é útil quando "
-"a máquina \n"
-"está abrigando outro sistema operacional, como o Windows.\n"
-"\n"
-"A opção \"Sincronização Automática de Tempo\" irá automaticamente regular o "
-"relógio\n"
-"conectando-o a um servidor remoto de tempo na internet. Na lista "
-"apresentada\n"
-"escolha um servidor perto de você. Obviamente, você deve dispor de uma "
-"conexão\n"
-" com a internet para isso."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"O X (o sistema X window) é o coração da interface gráfica GNU/Linux\n"
-"na qual todos os ambientes gráficos (KDE, Gnome, AfterStep, WindowMaker...)\n"
-"acoplados ao Mandrake Linux se baseiam. Nesta seção, o DrakX\n"
-"tentará configurar o sistema X automaticamente.\n"
-"\n"
-"É muito raro este processo falhar, o que pode ocorrer se o hardware for "
-"muito velho\n"
-"(ou muito novo). Se tudo correr bem, ele iniciará o X automaticamente com a "
-"melhor\n"
-"resolução possível, dependendo do tamanho do monitor. Uma janela aparecerá \n"
-"e perguntará se você pode vê-la.\n"
-"\n"
-"Se você estiver usando a instalação em modo \"Expert\", você deverá entrar "
-"no \n"
-"assistente de configuração X. Veja a seção correspondente do manual para "
-"mais \n"
-"informações sobre este assistente.\n"
-"\n"
-"Se você conseguir ver a mensagem e responder \"Sim\", então o DrakX seguirá "
-"para\n"
-"o próximo passo. Se você não conseguir ver a mensagem, significa que a "
-"configuração\n"
-"estava errada, e o teste irá automaticamente terminar em 10 segundos, "
-"restaurando\n"
-"a tela."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Na primeira vez que você usar o sistema X, você pode não ficar muito\n"
-"satisfeito com a imagem (tela muito pequena, errada no sentido esquerdo -"
-"direito...).\n"
-"Porém, mesmo se o X começar corretamente, o DrakX irá perguntar se a "
-"configuração\n"
-"o agrada. Irá também propôr modificações, mostrando uma lista de "
-"alternativas, pedindo \n"
-"a você para escolher uma.\n"
-"\n"
-"Como último recurso, se você ainda não conseguir fazer o X funcionar,, "
-"escolha\n"
-"\"Mudar placa de vídeo\", selecione \"Placas não listadas\", e quando "
-"perguntado em qual \n"
-"servidor você deseja, escolha \"FBDev\". É uma opção à prova de erros, que "
-"funciona\n"
-"com qualquer placa de vídeo moderna. Depois escolha \"Testar de novo\" para "
-"se certificar."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"finalmente, você será perguntado se deseja ver a interface gráfica durante a "
-"inicialização.\n"
-"Repare que esta opção será apresentada mesmo se você escolher não testar a \n"
-"configuração. Obviamente, você deverá responder \"Não\" se a sua máquina irá "
-"funcionar\n"
-"como um servidor, ou se você não conseguiu configurar o display."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"O CDROM Mandrake Linux possui um modo de resgate embutido. Você pode ter "
-"acesso\n"
-"a ele iniciando sua máquina pelo CDROM, apertando >>F1<< durante o boot e "
-"digitando\n"
-">>rescue<< no prompt. No caso de o seu computador não iniciar pelo CDROM, "
-"você\n"
-"deverá voltar a este passo em pelo menos duas situações:\n"
-"\n"
-" *quando instalando o boot loader, DrakX irá reescrever o setor de boot "
-"(MBR)\n"
-"do seu disco rígido principal (não se você estiver usando outro gerenciador "
-"de boot)\n"
-"para que você poassa iniciar com o Windows ou com o GNU/Linux (assumindo "
-"que\n"
-"você tem Windows no seu sistema). Se você precisar reinstalar o Windows, o "
-"instalador\n"
-"da Microsoft irá reescrever o setor de boot, e você não poderá iniciar o GNU/"
-"Linux!\n"
-"\n"
-" *se aparecer um problema, e você não puder iniciar o GNU/Linux do disco "
-"rígido,\n"
-"este floppy será o único meio de restaurar e iniciar o GNU/Linux. Ele contém "
-"uma \n"
-"série de feramentas para reparar e restaurar o sistema, que pode ter parado "
-"por falta de \n"
-"energia, ou algum erro de digitação, erro de senha, ou qualquer outro "
-"motivo.\n"
-"\n"
-"Quando você clica nesta etapa, você será instado a inserir um disco no drive "
-"de floppy.\n"
-"O disco que você inserir deverá estar vazio ou conter dados que você não "
-"precisa.\n"
-"Você não precisará reformatá-lo, porque o DrakX irá reescrever o disco "
-"inteiro."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"A esse ponto, você precisa escolher onde você quer instalar o seu sistema\n"
-"Mandrake Linux no seu disco rígido. Se estiver vazio ou se um sistema\n"
-"operacional existente usa todo o espaço disponível, você terá que\n"
-"particioná-lo. Basicamente, particionar um disco rígido consiste em\n"
-"dividí-lo logicamente para criar espaço para o seu novo sistema Mandrake "
-"Linux.\n"
-"\n"
-"Como os efeitos de um processo de particionamento são normalmente\n"
-"irreversíveis, o particionamento pode ser intimidante e estressante se\n"
-"você for um usuário inexperiente.\n"
-"Esse ajudante simplifica o procceso. Antes de começar, favor consultar o "
-"manual\n"
-"e não se apressar.\n"
-"\n"
-"\n"
-"Você precisa de no mínimo duas partições. Uma para o sistema opercional em e "
-"a\n"
-"outra para a memória virtual (também chamada de Swap).\n"
-"\n"
-"\n"
-"Se as partições já tiverem sido definidas (por uma instalação prévia ou "
-"através\n"
-"de outra ferramenta particionadora), você precisa apenas escolher aquelas a "
-"usar\n"
-"para instalar o seu sistema Linux.\n"
-"\n"
-"\n"
-"Se as partições não tiverem sido definidas ainda, você precisa criá-las.\n"
-"Para fazer isso, use o ajudante disponível acima. Dependendo da\n"
-"configuração do seu disco rígido, várias soluções podem estar disponíveis:\n"
-"\n"
-"* Usar partição existente: o ajudante detectado uma ous mais partições Linux "
-"já existentes no seu disco rígido. Se\n"
-"  você quiser mantê-las, escolha essa opção. \n"
-"\n"
-"\n"
-"* Apagar todo o disco: se você quiser deletar todos os dados e todas as "
-"partições existentes no disco rígidos e substituí-las pelo seu novo sistema "
-"Mandrake Linux, você pode escolher essa opção. Tenha cuidado com essa "
-"opção,\n"
-"  você não pode reverter sua escolha após a confirmação.\n"
-"\n"
-"\n"
-"* Usar o espaço livre na partição Windows: se o Microsoft Windows estiver "
-"instalado no seu disco rígido e tomar\n"
-"  todo o espaço disponível, você tem que criar espaço livre para o Linux. "
-"Para fazer isso, você pode deletar a sua\n"
-"  partição Microsoft Windows e dados (ver \"Apagar todo o disco\" ou "
-"soluções \"Modo Expert\") ou redimensionar\n"
-"  a sua partição Microsoft Windows. O redimensionamento pode ser feito sem a "
-"perda de dados. Essa solução é\n"
-"  recomendada se você quiser usar o Mandrake Linux e o Microsoft Windows no "
-"mesmo computador.\n"
-"\n"
-"\n"
-"  Antes de escolher essa solução, favor entender que o tamanho de sua "
-"partição\n"
-"  Microsoft Windows será menor do que agora. Isso significa que você irá\n"
-"ter menos espaço livre no Microsoft\n"
-"  Windows para guardar os seus dados ou instalar novos programas.\n"
-"\n"
-"\n"
-"* Modo Expert: se você quiser particionar manualmente o seu disco rígido, "
-"escolha essa opção. Tenha cuidado\n"
-"  antes de escolhe-la. Ela é muito poderosa, mas muito perigosa. Você pode "
-"perder todos os seus dados\n"
-"  facilmente. Então não escolha essa solução a não ser que saiba o que faz."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Aqui estamos, a instalação agora está completa e o seu GNU/Linux está "
-"pronto\n"
-"para usar. Clique em  \"OK\"para reiniciar o sistema. Você pode iniciar o "
-"GNU/Linux \n"
-"ou o Windows, o que você preferir (se estiver em dual-boot), assim que o "
-"computador\n"
-"tiver reiniciado.\n"
-"\n"
-"O botão \"Avançado\" (em modo expert) mostra mais dois botões:\n"
-"\n"
-" * \"gerar disco de autoinstalação\": para criar um disco de instalação que "
-"irá\n"
-"automaticamente fazer uma instalação completa sem a ajuda de um operador,\n"
-"semelhante à instalação que você acabou de fazer.\n"
-"\n"
-"   Note que duas opções diferentes estão disponíveis depois de clicar o "
-"botão:\n"
-"\n"
-"   * \"Replay\". É uma instalação parcialmente automática, porque a seção "
-"de\n"
-"particionamento (somente esta) permanece interativa.\n"
-"\n"
-"    * \"Automatizada\". Completamente automatizada: o disco rígido é "
-"completamente \n"
-"reescrito, e todos os dados anteriores são perdidos.\n"
-"\n"
-"   Esta funcionalidade é muito adequada quando se deseja instalar o sistema\n"
-"em um grande número de máquinas semelhantes. Veja a seção de autoinstalação\n"
-"do nosso website.  * \"Save packages selection\"(*) : salva a seleção de "
-"pacotes como feita anteriormente.\n"
-"Depois, quando fizer outra instalação, insira o floppy no drive e rode a "
-"instalação, indo\n"
-"para a tela de ajuda pela tecla F1 e escolhendo >>linux defcfg=\"floppy"
-"\"<<.\n"
-"\n"
-"(*) Você necessitará de um disco floppy formatado em FAT (para criar um no "
-"GNU/Linux\n"
-"digite \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Qualquer partição que acabou de ser criada deve ser\n"
-"formatada para o uso (formatar significa criar um sistema de arquivos).\n"
-"\n"
-"Agora, você pode reformatar algumas partições existentes para apagar os "
-"dados\n"
-"contidos nelas. Se você deseja fazer isso, favor também selecionar quais\n"
-"partições você deseja formatar\n"
-"\n"
-"Favor notar que não é necessário reformatar todas as partições já "
-"existentes.\n"
-"Você deve reformatar as partições contendo o sistema operacional (tal como\n"
-"\"/\",\"/usr\" ou \"/var\"), mas você não tem que reformatar as partições "
-"contendo\n"
-"dados que você deseja manter (normalmente /home).\n"
-"\n"
-"Favor tenha cuidado ao selecionar as partições, após formatá-las,\n"
-"todos os dados serão apagados e não pode ser recuperados.\n"
-"\n"
-"Cliquem em \"OK\" quando estiver pronto para formatar as partições.\n"
-"\n"
-"Clique em \"Cancelar\" se você desejar escolher outras partições para "
-"instalar\n"
-"o seu novo sistema operacional Mandrake Linux."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Seu novo sistema operacional Mandrake Linux está sendo instalado\n"
-"Essa operação deve demorar algumas minutos (isso depende do tamanho que\n"
-"você escolheu para instalar e a velocidade do seu computador).\n"
-"\n"
-"Por favor seja paciente."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Antes de continuar você deve ler com atenção os termos da Licensa. Ela "
-"cobre\n"
-"o Mandrake Linux inteiro, e se você não concorda com todos os termos, clique "
-"no \n"
-"botão \"Recusar\" que irá imediatamente sair da instalação. Para continuar "
-"na instalação,\n"
-"clique em \"Aceitar\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Neste ponto é necessário escolher o nível de segurança desejado para a "
-"máquina.\n"
-"Via de regra, quanto mais exposta a máquina está, e quanto mais dados "
-"cruciais estão\n"
-"guardados nela, maior deve ser o nível de segurança. Contudo, os níveis mais "
-"altos de \n"
-"segurança são obtidos às expensas da facilidade de uso. Consulte o capítulo "
-"MSEC\n"
-" do ``Manual de Referência''  para conseguir mais informações sobre o "
-"significado destes\n"
-"níveis de segurança.\n"
-"\n"
-"Se você não souber o que escolher, siga os defaults."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Agora você precisa escolher qual(is)\n"
-"partição(ões) utilizar para instalar o seu novo sistema Mandrake Linux. Se "
-"aspartições\n"
-"já estiverem definidas (através de uma instalação anterior do GNU/Linux ou "
-"outra\n"
-"ferramenta particionadora), você pode utilizá-las. Caso contrário, as\n"
-"partições devem ser definidas.\n"
-"\n"
-"Para criar partições, você deve primeiro selecionar um disco rígido. Você\n"
-"pode selecionar o disco clicando em \"hda\" para o primeiro drive IDE,\"hdb"
-"\" para\n"
-"o segundo ou \"sda\" para o primeiro drive SCSI e assim por diante.\n"
-"\n"
-"Para particionar o disco selecionado, você pode usar as seguintes opções:\n"
-"\n"
-"   * Limpar tudo: essa opção deletará todas as partições disponíveis do "
-"disco rígido selecionado.\n"
-"\n"
-"   * Auto alocar: essa opção lhe permite criar automaticamente partições "
-"Ext2 e swap no espaço livre do seu\n"
-"     disco rígido.\n"
-"\n"
-"   * Resgatar tabela de partição: se sua tabela de partição estiver "
-"danificada, você pode tentar recuperá-la usando\n"
-"     essa opção. Tenha cuidado e lembre-se que ela pode falhar.\n"
-"\n"
-"   * Desfazer: você pode usar essa opção para cancelar suas alterações.\n"
-"\n"
-"   * Recarregar: você pode usar essa opção se você desejar desfazer todas as "
-"suas alterações e recomeçar de novo\n"
-"\n"
-"   * Ajudante: se você desejar utilizar um ajudante para particionar o seu "
-"disco rígido, você pode usar essa opção.\n"
-"     É recomendada caso não tenha conhecimento sobre particionamento.\n"
-"\n"
-"   * Restaurar do disquete: se você salvou a sua tabela da partição em um "
-"disquete em um instalação anterior, você\n"
-"     pode recuperá-la com essa opção.\n"
-"\n"
-"   * Salvar em disquete: se você quiser salvar sua tabela de partição em um "
-"disquete para pode recuperá-la,\n"
-"     você pode usar essa opção. É altamente recomendado utilizá-la.\n"
-"\n"
-"   * Salvar: quando você terminar de particionar o seu disco rígido, use "
-"essa opção para salvar as alterações.\n"
-"\n"
-"Nota: você pode utilizar qualquer opção usando o teclado: navegue entre as "
-"partições usando Tab e as setas para cima/baixo.\n"
-"\n"
-"Quando a partiçõ estiver selecionada, você pode usar:\n"
-"\n"
-"           * Ctrl-c para criar uma nova partição (quando uma vazia estiver "
-"selecionada)\n"
-"           * Ctrl-d para deletar uma partição\n"
-"\n"
-"           * Ctrl-m para especificar um ponto de montagemSe você está "
-"instalando em uma Máquina PPC, você vai querer criar uma pequena partição "
-"'bootstrap' HFS de ao menos 1MB para\n"
-"usar com o gerenciador de boot yaboot. Se você quiser criar uma partição um "
-"pouco maior, digamos 50MB, você pode usar o espaço \n"
-"para guardar um kernel extra e uma imagem ramdisk para emergências."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mais de uma partição Microsoft Windows foi detectada\n"
-"em seu disco rígido. Favor escolher a que você quer redimensionar para\n"
-"instalar o seu novo sistema operacional Mandrake Linux.\n"
-"\n"
-"Nota: cada partição é listada da seguinte forma: \"Nome Linux\", \"Nome\n"
-"Windows\" \"Capacidade\".\n"
-"\n"
-"\"Nome Linux\" é codificado da seguinte maneira: \"tipo do disco rígido\", "
-"\"número do disco rígido\", \"número da partição\" (por exemplo, \"hda1\").\n"
-"\n"
-"\"Tipo do disco rígido\" é \"hd\" se seu disco rígido for IDE e \"sd\"\n"
-"se ele for um disco rígido SCSI.\n"
-"\n"
-"\"Número do disco rígido\" é sempre uma letra depois de \"hd\" ou \"sd\".Com "
-"discos rígidos IDE:\n"
-"\n"
-"   * \"a\" significa \"disco rígido mestre na controladora IDE primária\",\n"
-"\n"
-"   * \"b\" significa \"disco rígido escravo na controladora IDE primária\",\n"
-"\n"
-"   * \"c\" significa \"disco rígido mestre na controladora IDE secundária"
-"\", \n"
-"   * \"d\" significa \"disco rígido escravo na controladora IDE secundária"
-"\". \n"
-"\n"
-"Com discos rígidos SCSI, um significa \"disco rígido primário\", um \"b\" "
-"significa \"disco rígido secundário\", etc...\n"
-"\n"
-"\"Nome Windows\" é a letra do seu disco rígido no Windows (o primeirodisco\n"
-"ou partição é chamado \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor seja paciente. Essa operação pode demorar vários minutos."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"dRakX agora precisa saber se você deseja fazer uma isntalação default\n"
-" (\"recomendada\") ou se você deseja ter maior controle sobre o processo "
-"(\"expert\").\n"
-"Você também tem a escolha de fazer uma nova instalação ou uma atualização "
-"de\n"
-"um sistema MandrakeLinux existente antes.\n"
-"\n"
-" * \"Instalar\" Limpa completamente o sistema antigo. Na verdade, dependendo "
-"do\n"
-"que existia antes, você ainda pode conseguir manter partições antigas sem\n"
-"modificações.\n"
-"\n"
-" * \"Atualização\" Esta classe de instalação permite simpelsmente atualizar "
-"os\n"
-"pacotes instalados no seu sistema MandrakeLinux. Ele mantém as atuais "
-"partições\n"
-"e os arquivos de usuário. Todos os outros passos da isntalação continuam "
-"disponíveis\n"
-"em comparação com a instalação primária.\n"
-"\n"
-" * \"Somente autalização de pacotes\" Esta nova classe de instalação "
-"permite\n"
-"atualizar um sistema Mandrake Linux existente mantendo todas as "
-"configurações do\n"
-"sistema intocadas. Adicionar novos pacotes à instalação atual também é "
-"possível.\n"
-"\n"
-"Dependendo do seu conhecimento do GNU/Linux, selecione uma das seguintes\n"
-"opções:  * Recomendada: escolha esta se você nunca instalou um sistema "
-"operacional\n"
-"GNU/Linux antes. A instalação será bem simples e você só terá que "
-"responder \n"
-"umas poucas perguntas.\n"
-"\n"
-"* Expert: se você tem um bom conhecimento sobre o GNU/Linux, você pode "
-"escolher essa classe. Como em \n"
-"  na classe \"Personalizado\", você poderá escolher o uso primário(estação, "
-"servidor, desenvolvimento)\n"
-"  Tenha muito cuidado antes de escolher essa classe. Você poderá fazer uma "
-"instalação bastante personalizada.\n"
-"  Responda a algumas questões que podem ser bem difíceis se você não tiver "
-"conhecimento sobre GNU/Linux.\n"
-"Então, só escolha essa classe se souber o que está fazendo."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente o DrakX esoclhe o teclado certo para você, (dependendo da "
-"linguagem\n"
-"qe você escolheu) e você nem verá este passo. Contudo, você pode possuir um "
-"teclado\n"
-"que não corresponde à linguagem que você escolheu: se você for um suíço, "
-"porém falante\n"
-"de inglês, você pode preferir continuar tendo um teclado suíço. Ou se você "
-"fala inglês mas\n"
-"mora no Quebec, você pode estar na mesma situação. Em ambos os casos, você "
-"deverá \n"
-"voltar a este passo na instalação e escolher o teclado apropriado da lista.\n"
-"\n"
-"Clique em \"Mais\" para ver uma lista completa de teclados disponíveis."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Por favor, escolha a sua língua preferida para a instalação e uso do "
-"sistema.\n"
-"\n"
-"Clicando em \"Avançado\" você poderá selecionar outras línguas para serem "
-"instaladas\n"
-"no seu sistema. Selecionar outras línguas irá também instalar os arquivos "
-"específicos\n"
-"para documentação e aplicativos. Por exemplo, se você pretende hospedar "
-"usuários\n"
-"espanhóis na sua máquina, selecione Inglês como língua principal na árvore "
-"de\n"
-" viisualização e na seção avançada clique na estrela cinza correspondente a "
-"\"Espanhol|\n"
-"Espanha\".\n"
-"\n"
-"Note que múltiplas línguas podem ser instaladas. Uma vez que você "
-"selecionou \n"
-"quaisquer adicionais, clique em \"OK\" para continuar."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Por default, o DrakX assume que você tem um mouse de dois botões, e irá setá-"
-"lo para\n"
-"emulação do terceiro botão. O DrakX saberá automaticamente se é PS/2, serial "
-"ou USB.\n"
-"\n"
-"Se você deseja especificar um tipo diferente de mouse, selecione o tipo da "
-"lista\n"
-"\n"
-"Se você escolher um mouse diferente do default você será apresentado a uma "
-"tela de teste de mouse.\n"
-"Use os botões e a roda para verificar se as configurações estão boas. Se o "
-"mouse \n"
-"não estiver funcionando bem, pressione a barra de espaço ou RETORNO para "
-"\"Cancelar\"\n"
-"e escolher de novo."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Favor selecionar a porta correta. Por exemplo, a porta COM1\n"
-"no MS Windows é chamada ttyS0 no GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Esta é a principal opção para a segurança do seu sistema GNU/Linux: você\n"
-"deverá digitar a senha de \"root\". \"root\" é o administrador do sistema, e "
-"é o único\n"
-"autorizado a fazer atualizações, adicionar usuários e mudar configurações "
-"gerais\n"
-"do computador. Em suma: \"root\" pode tudo! Por isso você deve escolher uma "
-"senha\n"
-"dicífil de adivinhar - o DrakX irá avisá-lo se for muito fácil. Você pode "
-"também escolher\n"
-"não entrar uma senha, mas nós desaconselhamos fortemente esta opção. Não "
-"pense que\n"
-"por ter inicado o computador em GNU/Linux você está a salvo de problemas. "
-"\"root\"\n"
-"pode contornar todas as limitações do sistema e desavisadamente apagar "
-"todos\n"
-"os dados de uma partição, por exemplo. É muito importante que a senha de "
-"\"root\"\n"
-"seja difícil.\n"
-"\n"
-"A senha deve ser um mistura de caracteres alfanuméricos de pelo menos 8 "
-"caracteres\n"
-"de extensão. Nunca escreva a senha \"root\" num papel - isso torna o sistema "
-"vulnerável.\n"
-"\n"
-"Porém, nào faça também uma senha muito complicada e longa, porque você "
-"deve \n"
-"ser capaz de relembrá-la sem muito esforço.\n"
-"\n"
-"Asenha nào será mostrada na tela enquanto você digita. Portanto você deverá "
-"digitar a \n"
-"senha duas vezes para reduzir a chance de erro. Se ocorrer de você digitar o "
-"mesmo \n"
-"erro duas vezes, você deverá fazer o primeiro login no sistema com esta "
-"senha \"errada\".\n"
-"\n"
-"Em mod expert você será questionado se se conectará a um servidor de\n"
-" autenticação, como NIS ou LDAP.\n"
-"\n"
-"Se sua rede usa o protocolo LDAP (ou NIS) selecione \"LDAP\" (ou \"NIS\") "
-"como\n"
-"autenticação. Se você não sabe, pergunte ao seu administrador de rede.\n"
-"\n"
-"Se seu computador não está conectado a uma rede administrada, você deverá\n"
-"esoclher \"Local Files\" para autenticação."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"O LILO e o Grub são gerenciadores de iniciação do GNU/Linux. Este estágio "
-"via de regra\n"
-"é totalmente automatizado. De fato, o DrakX analisa o setor de boot do disco "
-"rígido e\n"
-"age de acordo com o que encontra ali.:\n"
-"\n"
-" * Se um setor de boot windows é encontrado, ele substitui com um setor de "
-"boot\n"
-"LILO ou Grub. Portanto, você poderá iniciar o GNU/Linux ou outro sistema "
-"operacional;\n"
-"\n"
-" * Se um setor LILO ou Grub é encontrado, ele será substituído por outro "
-"novo;\n"
-"\n"
-"Em dúvida, o DrakX irá mostrar um diálogo com várias opções.\n"
-"\n"
-" * \"Gerenciador de iniciação a ser usado\": você tem três escolhas:\n"
-"\n"
-"    *\"GRUB\": se vocvê prefere o GRUB (menu em modo texto).\n"
-"\n"
-"    *\"LILO com menu em modo gráfico\" se você prefere o LILO em modo "
-"gráfico.\n"
-"\n"
-"    *\"LILO com menu em mod texto\": se você prefere o LILO em modo texto.\n"
-"\n"
-" * \"Dispositivo de iniciação\": Na maioria dos casos você nào irá mudar o "
-"default\n"
-"(\"/dev/hda\"), mas se você preferir, o carregador de iniciação poderá ser "
-"instalado\n"
-"num segundo disco rígido (\"dev/hdb\"), ou mesmo num flopy (\"/dev/fd0\").\n"
-"\n"
-" * \"Tempo antes de iniciar o sistema default\": antes de iniciar o "
-"computador, este\n"
-"é o tempo dado ao usuaio para escolher o sistema a ser iniciado.\n"
-"\n"
-"!! Repare que se você escolher não instalar um gerenciador de iniciação "
-"(selecionando\n"
-"\"Cancelar\" neste ponto) você deve se certificar de que você tem um jeito "
-"de iniciar o\n"
-"seu sistema Mandrake Linux! Também, tenha certeza de que você sabe o que "
-"está \n"
-"fazendo quando mudar qualquer default destes.!!\n"
-"\n"
-"Clicando em \"Avançado\" neste diálogo, aparecerão várias opções "
-"avançadas, \n"
-"resevadas ao usuário experiente.\n"
-"\n"
-"Depois de ter configurado todos os parâmetros do gerenciador de iniciação na "
-"máquina,\n"
-"você verá as opções de iniciação disponíveis no momento da iniciação.\n"
-"\n"
-"Se houver outro sistema operacional instalado na máquina, "
-"ser'automaticamente\n"
-"adicionado ao menu de iniciação. Portanto você poderá depois, ajustar as "
-"opções \n"
-"existentes. Selecione uma entrada e clique \"Modificar\" para modificá-la ou "
-"removê-la,\n"
-"\"Adicionar\" cria uma nova entrada, e \"Feito\" vai para o próximo passo da "
-"instalação."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (o LInux LOader) e Grub são gerenciadors de boot: ele são capazes de\n"
-"de inicializar tanto no GNU/Linux quanto qualquer outro sistema\n"
-"operacional instalado. Normalmente, esses sistemas são detectados e\n"
-"instalados corretamente. Se esse não for o caso, você pode adicionar\n"
-"entradas manualmente nessa tela. Cuidado ao escolher os parâmetros "
-"corretos.\n"
-"\n"
-"\n"
-"Você pode também não dar acesso a esses sistemas operacionais para\n"
-"ninguém, na qual você pode deletar as entradas correspondentes. Mas nesse\n"
-"caso, você precisará de um disco de inicialização para poder utilizá-los!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Você precisa indicar onde você deseja\n"
-"guardar a informação necessária para inicializar o GNU/Linux.\n"
-"\n"
-"\n"
-"A não ser que você saiba exatamente o que está fazendo, escolha \"Primeiro\n"
-"setor do drive (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX tentará localizar adaptadores PCI SCSI. Se DrakX encontrar\n"
-"um adaptador SCSI e souber qual driver utilizar, ele será instalado\n"
-"automaticamente\n"
-"\n"
-"\n"
-"Se você não possuir adaptadores SCSI, um adaptador ISA SCSI ou PCI SCSI que\n"
-"DrakX não reconhece, você será perguntado se algum adaptador SCSI existe em "
-"seu\n"
-"sistema. Se não existir adaptadores, você pode clicar em \"Não\". Se você "
-"clicar em\n"
-"\"Sim\", uma lista de drivers aparecerá para que você possa escolher o seu\n"
-"adaptador.\n"
-"\n"
-"\n"
-"Se você tem que especificar manualmente o seu adaptador, DrakX perguntará "
-"se\n"
-"você quer especificar opções para ele. Você pode deixar que o DrakX examine "
-"o hardware\n"
-"para descobrir as opções. Isso normalmente funciona bem.\n"
-"\n"
-"\n"
-"Se não, você precisará prover as opções para o driver. Favor olhar o Guia do "
-"Usuário\n"
-"(capítulo 3, seção \"Coletando informações sobre seu hardware) para dicas "
-"sobre\n"
-"como descobrir essas informações na documentação do hardware, no Web site\n"
-"do fabricante (se você tiver acesso à Internet) ou no Microsoft Windows\n"
-"(se você tivé-lo no seu sistema)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Você pode adicionar entradas adicionais no yaboot, tanto para outros "
-"sistemas operacionais,\n"
-"kernels alternativos, ou imagem de boot de emergência.\n"
-"\n"
-"\n"
-"Para outros SO - a entrada consiste apenas de um nome e da partição root.\n"
-"\n"
-"\n"
-"Para Linux, existem algumas opções possíveis: \n"
-"\n"
-"\n"
-"  - Label: Isso é simplesmente o nome que será necessário pare entrar no "
-"sistema \n"
-"através do yaboot.\n"
-"\n"
-"\n"
-"  - Image: Isso seria o nome do kernel a ser usado. Tipicamente vmlinux ou "
-"uma\n"
-"variação de vmlinux com uma extensão.\n"
-"\n"
-"\n"
-"  - Root: O dispositivo padrão ou '/' da sua instalação Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - Append: No hardware Apple, a opção append (anexar) é normalmente usada "
-"para\n"
-"auxiliar na inicializando do hardware de vídeo, ou para permitir a emulação "
-"do botão\n"
-"do mouse pelo teclado, devido a falta do segundo e terceiro botão no mouse "
-"Apple.\n"
-"A seguir estão alguns exemplos:\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Essa opção pode ser usada tanto para carregar módulos adicionais "
-"antes que\n"
-"o dispositivo de boot esteja disponível, ou para carregar uma imagem ramdisk "
-"de emergência.\n"
-"\n"
-"\n"
-"  - Initrd-size: O tamanho padrão do ramdisk é 4096 bytes. Se você precisar "
-"alocar\n"
-"um ramdisk maior, essa opção pode ser usada.\n"
-"\n"
-"\n"
-"  - Read-write: Normalmente a partição 'root' é inicialmente carregada como "
-"apenas-leitura,\n"
-"para permitir uma checagem do sistema antes de ativá-lo. Você pode modificar "
-"essa opção aqui.\n"
-"\n"
-"\n"
-"  - NoVideo: Se o hardware de vídeo Apple mostrar ser excepcionalmente "
-"problemática, você pode\n"
-"selecionar esse opção para entrar no modo 'semvídeo', com suporte nativo ao "
-"framebuffer.\n"
-"\n"
-"\n"
-"  - Default: Selecione essa entrada como sendo a opção padrão Linux, "
-"bastando pressionar\n"
-"ENTER no prompt do yaboot. Essa entrada também aparecerá marcada com um '*', "
-"se você\n"
-"pressionar TAB para ver as opções de boot."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot é o inicializador para hardware NewWorld MacIntosh. Ele é capaz\n"
-"de inicializar tanto o GNU/Linux, MacOS ou MacOSX, se existente no seu\n"
-"computador. Normalmente, esses outros sistemas operacionais são detectados\n"
-"corretamente e instalados. Se esse não for o seu caso, você pode adicionar\n"
-"entradas manualmente nesta tela. Escolha cuidadosamente os parâmetros.\n"
-"\n"
-"\n"
-"A principais opções do Yaboot são:\n"
-"\n"
-"\n"
-"  - Mensagem Inicial: uma pequena mensagem de texto que aparece antes do\n"
-"prompt do boot.\n"
-"\n"
-"\n"
-"  - Dispositivo de boot: Indica onde você quer colocar a informação "
-"necessária \n"
-"para entrar no GNU/Linux. Geralmente, você terá que configurar uma partição "
-"bootstrap \n"
-"para manter essa informação.\n"
-"\n"
-"\n"
-"   - Tempo de boot do Kernel: esse tempo é similar ao tempo de boot do "
-"LILO.  Após \n"
-"selecionar Linux, você terá 0.1 segundo antes do kernel padrão ser "
-"selecionado.\n"
-"\n"
-"\n"
-"   - Permitir CD Boot?: Marcar essa opção lhe permitirá escolher 'C' para CD "
-"no\n"
-"primeiro prompt do boot.\n"
-"\n"
-"\n"
-"   - Permitir OF Boot?: Marcar essa opção lhe permitirá escolher 'N' para "
-"Firmware\n"
-"Aberto no primeiro prompt de boot.\n"
-"\n"
-"\n"
-"   - SO padrão: você pode selecionar qual SO será iniciado por padrão quando "
-"o tempo \n"
-"do Firmware Aberto expirar."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Escolha o disco rígido que você quer apagar para instalar\n"
-"sua partição Mandrake Linux. Tenha cuidado, pois todos os dados existentes "
-"serão\n"
-"perdidos e não poderão ser recuperados."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Clique em \"OK\" se você quiser apagar todos os\n"
-"dados e partição existentes nesse disco rígido. Tenha cuidado, pois após "
-"clicar\n"
-"em \"OK\", você não será capaz de recuperar os dados/partições existentes "
-"nesse\n"
-"disco rígido, incluindo quaisquer dados do Windows.\n"
-"\n"
-"\n"
-"Clique em \"Cancelar\" para cancelar essa operação sem perder qualquer dado\n"
-"e partição presente nesse disco rígido."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Você selecionou o(s) seguinte(s) serviço(s): %s\n"
-"\n"
-"\n"
-"Esses servidores são ativados por padrão. Eles não possuem nenhuma falha\n"
-"de segurança conhecida, mas pode existir uma nova. Nesse caso, você "
-"deveatualizá-lo\n"
-"o mais cedo possível.\n"
-"\n"
-"\n"
-"Você realmente quer instalar esses servidores?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Não pode usar broadcast sem domínio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira um disquete FAT formatado no drive %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Esse disquete não está formatado como FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar a seleção salva de pacotes, entre na instalação com ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro lendo arquivo %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algum hardware no seu computador precisa de drivers ``proprietário'' \n"
-"para funcionar. Você pode encontrar informações sobre eles em: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Você deve ter uma partição root.\n"
-"Para isso, crie um partição (ou click em uma existen).\n"
-"Então escolha ação ``Ponto de montagem'' e coloque como `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Você tem que ter uma partição swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Você não possui uma partição swap\n"
-"\n"
-"Continuar mesmo assim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Você tem que ter uma partição swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar espaço livre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Sem espaço livre suficiente para alocar as novas partições"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Use partição existindo"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Não existe nenhuma tabela de partição para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partição Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Qual partição você quer usar para o Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolha os tamanhos"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tamanho da partição root em MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tamanho da partição swap em MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espaço livre da partição Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Qual partição você quer redimensionar?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Computando limites do sistema de arquivo do Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionar FAT é incapaz de manipular sua partição, \n"
-"o seguinte erro ocorreu: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Sua partição Windows está muito fragmentada, favor rodar primeiro o "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENÇÃO!\n"
-"\n"
-"Drakx precisa agorar redimensionar sua partição Windows. Tenha cuidado:\n"
-"essa operação é perigosa. Se você não tiver feito ainda, você deve rodar o\n"
-"scandisk no Windows (e opcionalmente rodar o defrag) nesta partição,\n"
-"então reiniciar a instalação. Você também deveria fazer backup de seus\n"
-"dados. Quando tiver certeza, pressione Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quanto de espaço você quer deixar para o windows em"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partição %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Falha no redimensionamento FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Não existem partições FAT para redimensionar ou para usar como loopback (ou "
-"não existe espaço suficiente)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Apague disco inteiro"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Remover Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Você tem mais de um disco rígido, em qual deles você quer instalar o linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Todas as partições que existem e todos os dados serão perdidos em disco %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizada"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Você pode agorar particionar %s.\n"
-"Quando terminar, não esqueça de salvar usando `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Você não tem espaço livre na sua partição Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Eu não achei espaço para instalação"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O particionador DrakX encontrou as soluções seguintes:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento falhou: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Trazendo (acessando) a rede"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Fechando (desconectando) a rede"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Um erro ocorreu, mas eu não sei como lidar com ele.\n"
-"Continue a seu próprio risco."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ponto de montagem %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns pacotes importantes não foram instalados corretamente.\n"
-"O seu drive de cdrom ou o seu cdrom está defeituoso.\n"
-"Cheque o cdrom em um computador instalado usando \"rpm -qpl Mandarke/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bem-vindo à %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nenhum drive de disquete disponível"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando no passo `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Seu sistema está com poucos recursos. Você pode ter algum problema na\n"
-"instalação do Mandrake Linux. Se isso ocorrer, você pode tentar instalar "
-"usando o\n"
-"modo texto. Para isso, aperte `F1' na tela de inicialização e escreva `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe de Instalação"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Por favor escolhe uma das seguintes classes de instalação:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"O tamanho total dos grupos que você selecionou é de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se você deseja instalar menos que esse tamanho,\n"
-"selecionar a percentagem de pacotes que você quer instalar.\n"
-"\n"
-"Uma baixa percentagem irá instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de 100%% irá instalar todos os pacotes selecionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Você tem espaço em seu disco para apenas %d%% desses pacotes.\n"
-"\n"
-"Se você deseja instalar menos que esse tamanho,\n"
-"selecionar a percentagem de pacotes que você quer instalar.\n"
-"Uma baixa percentagem irá instalar apenas os pacotes mais importantes;\n"
-"uma percentagem de %d%% irá instalar o máximo de pacotes possível."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Você será capaz de escolhe-los mais precisamente no próximo passo"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentagem de pacotes a serem instalados"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Seleção de Grupo de Pacotes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Seleção individual de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamanho total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pacote defeituoso"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versão: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamanho: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importância: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Você não pode selecionar esse pacote pois não existe espaço livre para "
-"instalá-lo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Os seguintes pacotes serão instalados"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Os seguintes pacotes serão removidos"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Você não pode selecionar/deselecionar esse pacote"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Esse é um pacote obrigatório, não pode ser deselecionado"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Você não pode deselecionar esse pacote. Ele já está instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Esse pacote tem que ser atualizado\n"
-"Tem certeza que você quer deselecioná-lo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Você não pode deselecionar essa pacote. Ele tem que ser atualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostra automaticamente os pacotes selecionados"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Salvar em disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Salvar seleção de pacotes"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Sair da instalação"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Por favor aguarde, preparando instalação"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacotes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando pacote %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceitar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Recusar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Mude o seu Cd-Rom!\n"
-"\n"
-"Favor inserir o Cd-Rom rotulado \"%s\" no seu drive e aperte em Ok quando "
-"estiver pronto.\n"
-"Se você não o tiver, aperte em Cancelar para evitar a instalação desse Cd-"
-"Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Continuar mesmo assim?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Houve um erro ordenando os pacotes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Houve um erro instalando os pacotes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocorreu um erro"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Você quer reiniciar a rede"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Contrato de licença"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Favor escolher o layout do seu teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aqui está a lista completa de teclados disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Qual classe de instalação você quer?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalar/Atualizar"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Isso é uma instalação ou atualização?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Atualizar"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Salvar seleção de pacotes"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porta do Mouse"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Favor escolher em qual porta serial seu mouse está conectado."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulação dos botões"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulação dos 2 botões"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulação dos 3 botões"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando cartões PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configurando IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "sem partições disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Escanenado partições para encontrar pontos de montagem"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Escolha os ponto de montagem"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Eu não consigo ler sua tabela de partição, é muito defeituosa para mim :(\n"
-"Eu posso tentar continuar limpando as partições defeituosas (TODOS OS DADOS\n"
-"serão perdidos!). A outra solução é não deixar o DrakX modificar a tabela\n"
-"de particão. (o erro é %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake falhou na leitura da tabela de partição.\n"
-"Continue a seu próprio risco!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Escolha as partições que você quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partição Root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Qual a partição root (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Você precisa reiniciar para que as modificações na tabela de partição tenham "
-"efeito"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Escolha as partições que você quer formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Checar blocos defeituosos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatando partições"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Criando e formatando arquivo %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Sem swap suficiente para completar a instalação, favor adicionar mais"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Procurando por pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Procurando pacotes à atualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Seu sistema não tem espaço suficiente para instalção ou atualização (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar do disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar do disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Seleção de Grupo de Pacotes"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Salvar em disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "O tamanho escolhido é maior que o espaço disponível"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se você tiver todos os CDs da lista abaixo, clique em Ok.\n"
-"Se você não tiver nenhum desses CDs, clique em Cancelar.\n"
-"Se apenas alguns CDs estiverem faltando, desmarque-os, então clique em Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom rotualdo \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparando instalação"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando pacote %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuração pós-instalação"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira um disquete vazio no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Você agora tem a possibilidade de fazer o download de software voltado para "
-"codificação (encriptação).\n"
-"\n"
-"ATENÇÃO:\n"
-"Devido a vários requerimentos requeridos aplicados à esses software e "
-"impostos\n"
-"por várias jurisdições, o cliente e/ou o usuário final desse software deve\n"
-"se assegurar que as leis da sua jurisdição lhe permite fazer o download, "
-"armazenar\n"
-"e/ou usar esse software.\n"
-"\n"
-"Além disso, o cliente e/ou o usuário final deve estar particularmente "
-"prevenido para\n"
-"não infringir as leis de sua jurisdição. Se o cliente e/ou o usuário final\n"
-"não respeitar a provisão dessas leis aplicáveis, irá lhe(s) ocorrer sérias\n"
-"sanções.\n"
-"\n"
-"Em nenhum acontecimento irá a Mandrakesoft ou seu manufaturadores e/ou seu "
-"fornecedor\n"
-"ser responsávei por danos especiais, indiretos ou acidentais seja, qual for\n"
-"(incluindo, mas não limitada à perda de lucros, interrupção de negócios, "
-"perda\n"
-" de informação comercial e outras perdas monetárias, e eventual "
-"endividamento e indenização\n"
-"a ser paga, de acordo com a decisão da corte) saindo do uso, posse, ou do\n"
-"download isolado desse software, do qual o cliente e/ou o usuário final "
-"pode\n"
-"eventualmente ter acesso após ter assinado o acordo presente.\n"
-"\n"
-"\n"
-"Para qualquer pergunta relacionada a esse acordo, favor entrar em contato \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Contactando o mirror (espelho) para pegar a lista de pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolha um mirror (espelho) de onde pegar os pacotes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Contactando o mirror (espelho) para pegar a lista de pacotes disponíveis"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Qual é o seu fuso horário?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "O seu relógio do hardware está configurado como GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nenhuma impressora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Você tem alguma outra?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sumário"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuso horário"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Placa ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Placa de som"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Placa de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Usar NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Especificar senha do root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nenhuma senha"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Essa senha é muito simples (deve ter ao menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticação?"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticação?"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autenticação NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domínio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Um disco de inicialização provê uma maneira de dar boot no Linux sem\n"
-"depender de um inicializador normal. Isso é necessário se você não quiser "
-"instalar\n"
-"o SILO no seu sistema, ou se outro sistema operacionar remover o SILO, ou\n"
-"o se\n"
-"SILO não funcionar com o seu hardware. Um disco de inicialização também\n"
-"pode\n"
-"ser usado com uma imagem de backup do Mandrake deixando muito mais fácil\n"
-"recuperar\n"
-"um sistema com danos severos.\n"
-"\n"
-"Se você quiser criar um disco de inicialização para o seu sistema, insira um "
-"disquete\n"
-"no drive e aperte em \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primeiro drive de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segundo drive de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Pular"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Um disco de inicialização provê uma maneira de entrar no Linux sem depender\n"
-"de um inicializador normal. Isso é necessário se você não quiser instalar o "
-"LILO (ou\n"
-"o grub) no seu sistema, ou se outro sistema operacionar remover o LILO, ou "
-"se o LILO\n"
-"não funcionar com o seu hardware. Um disco de inicialização também pode ser "
-"usado com\n"
-"uma imagem de backup do Mandrake, deixando muito mais fácil recuperar um "
-"sistema\n"
-"com danos severos. Você quer criar um disco de inicialização?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, nenhum drive de disquete disponível"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolha o drive de disquete que você quer usar para criar o disco de "
-"inicialização"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insira um disquete no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Criando disco de inicialização"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparando gerenciador de inicialização"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Você quer usar o aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro instalando o aboot, \n"
-"tentar forçar a instalação, mesmo que isso destrua a primeira partição?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalar gerenciador de inicialização"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"A instalação do gerenciador de inicialização falhou. Ocorreram os seguintes "
-"erros:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Você pode precisar mudar seu dispostivo de boot Open Firmware\n"
-" para ativar o gerenciado de boot. Se você não ver o prompt dele ao\n"
-" reiniciar, segure Command-Option-O-F ao reiniciar e digite:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Então escreva: shut-down\n"
-"No seu próximo boot, você deve ver o prompt do gerenciador de boot."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira um disquete vazio no drive %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Criando disquete de auto instalação"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos não foram completados.\n"
-"\n"
-"Você realmente quer sair agora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-#, fuzzy
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Parabéns, a instalação foi completada.\n"
-"Remova a mídia de inicialização e aperte enter para reiniciar.\n"
-"\n"
-"Para informações sobre correções disponíveis para essa versão do Mandrake "
-"Linux,\n"
-"consulte a Errata disponível em http://www.mandrakelinux.com/.\n"
-"\n"
-"Informações sobre a configuração do sistema estão disponíveis no\n"
-"capítulo pós-instalação do Guia Oficial de Usuário Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Criar disquete de auto instalação"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto instalação pode ser totalmente automatizada se\n"
-"você quiser, nesse caso, ela tomará de conta do disco\n"
-"rígido!! (em vista a instalação em outra máquina).\n"
-"\n"
-"Você pode preferir repetir a instalação.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automático"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Repetir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Salvar seleção de pacotes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalação do Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> move entre opções  | <Espaço> seleciona | <F12> próxima "
-"tela "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ausente"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolher ação"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avançado"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Por favor aguarde"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informação"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir Árvore"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Colapsar Árvore"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Mudar entre organização plana ou em grupo"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Má escolha, tente novamente\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Sua escolha? (padrão %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Sua escolha? (padrão %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opções: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Você quer usar o aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Sua escolha? (padrão %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tcheco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemão"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanhol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Filandês"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francês"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norueguês"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polonês"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russo"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Inglês (UK)"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Americano (US)"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armênio (velho)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armênio (máquina de escrever)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armênio (fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latino)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armênio (fonético)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Búlgaro"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorusso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suíço (layout Alemão)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suíço (layout Francês)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tcheco (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemão (sem teclas mortas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dinamarquês"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norueguês)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniano"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (layout \"Russo\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (layout \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelense"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelense (Fonético)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandês"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonês 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreano"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino Americano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituânio AZERTY (velho)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituânio AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituânio \"número de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituânio \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Lugar"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedônio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandês"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polonês (layout QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polonês (layout QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Português"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadense (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russo (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Eslovênio"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslováquio (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslováquio (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjani (cirílico)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Table"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado Tailandês"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Tailandês"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo moderno \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Americano (Internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"número de colunas\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslávio (latin/cirílico)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Monts circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Remover os volumes lógicos primeiro\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan/FistMouse (serial)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse Genérico PS2 com roda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botão"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse Genérico com 2 Botões"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Genérico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse Genérico com 3 Botões"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech Série CC (serial)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "Série MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Mouse Logitech (serial, tipo C7 antigo)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botões"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botões"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nenhum"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nenhum Mouse"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Favor testar o mouse"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para ativar o mouse,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVA SUA RODA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Terminar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Próximo ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Isto está correto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar à Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"A maneira mais comum de se conectar com adsl é pppoe.\n"
-"Mas algumas conexões usam pptp, umas poucas usam dhcp.\n"
-"Se você não sabe, escolha 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Qual cliente dhcp você quer usar?\n"
-"O padrão é dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nenhum adaptador de rede ethernet foi detectado em seu sistema.\n"
-"Eu não posso configurar esse tipo de conexão."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolha a interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Favor escolher qual adaptador de rede você quer usar para se conectar à "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configurando rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Favor entrar com o nome do seu host (se você souber).\n"
-"Alguns servidores DHCP requerem o nome do host para funcionar.\n"
-"Seu nome do host deve ser um nome de host totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Host name (nome do host)"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Auxiliar de Configuração da Rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Placa ISDN interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "De que tipo é sua conexão ISDN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Configuração de Firewall detectado!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Configuração de Firewall detectado!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuração ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Selecione o seu provedor.\n"
-" Se não estiver na lista, escolha Não Listado"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo da inicialização"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sem Canal-D (linhas arrendadas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Qual protocolo você quer usar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Qual tipo de placa você tem?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Eu não sei"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se você tiver uma placa ISA, os valores da próxima tela devem estar certos.\n"
-"\n"
-"Se você tiver uma placa PCMCIA, você tem que saber o irq e io de sua placa.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Qual é a sua placa ISDN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Eu detectei um placa ISDN PCI, mas não sei qual é o tipo. Favor selecionar "
-"uma placa PCI na próxima tela."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nenhuma placa ISDN PCI encontrada. Favor selecionar uma na próxima tela"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Favor escolher em qual porta serial seu modem está conectado."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opções dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome da conexão"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Número do telefone"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de Login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Baseado em script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Baseado em terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome do domínio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primeiro Servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segundo Servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Você pode se disconectar ou reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Você pode reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Você está conectado à Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Você pode se conectar à Internet ou reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Você não está conectado à Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Conectar"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Desconectar"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configurar rede"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Conexão e configuração da Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Você pode se disconectar ou reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Você pode se disconectar ou reconfigurar sua conexão."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuração da Rede"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Como você está fazendo uma instalação por rede, sua rede já está "
-"configurada.\n"
-"Clique em Ok para manter sua configuração, ou cancelar para reconfigurar sua "
-"conexão de Internet & Rede.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bem-vindo ao Ajudante de Configuração de Rede\n"
-"\n"
-"Estamos para configurar sua conexão de rede/internet.\n"
-"Se você não quiser usar a auto detecção, desmarque a opção.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolha o perfil a configurar:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar auto detecção"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detectando dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Conexão normal via modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado na porta %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Conexão ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectado %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Coneção LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectado na interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Conexão via cabo"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Conexão via cabo"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Coneção LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "placa(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolha a ferramente que você quer usar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Compartilhamento da Conexão à Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Você quer iniciar sua conexão ao iniciar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuração da Rede"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Um problema ocorreu reiniciando a rede: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Parabéns, a configuração da rede e internet está concluída.\n"
-"\n"
-"A configuração agora será aplicada no seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Quando isso terminar, nós recomendados você a reiniciar o seu\n"
-"ambiente X para evitar o problema da mudança do nome do host."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATENÇÃO: Esse dispostivo já foi configurado para se conectar à Internet.\n"
-"Apenas aceite para manter esse dispositivo configurado.\n"
-"A modificação dos campos abaixo irá sobrepor essa configuração."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Favor entrar com a configuração IP para esta máquina.\n"
-"Cada item deve ser entrando como endereço IP pontilhado-decimal\n"
-"(por exemplo, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Endereço IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP Automático"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "O endereço IP deve ser no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Favor entrar com o nome do seu host.\n"
-"Seu nome do host deve ser um nome de host totalmente qualificado,\n"
-"como por exemplo ``mybox.mylab.myco.com'' .\n"
-"Você também pode entrar como o endereço IP de um gateway se você tiver um"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuração de proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "O proxy deve ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuração da Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Você quer tentar se conectar à Internet agora?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testando sua conexão..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "O sistema está conectado à Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por razão de segurança, você será desconectado agora."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"O sistema não está conectado à internet.\n"
-"Tente reconfigurar sua conexão."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuração da Conexão"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Favor preencher ou marcar os campos abaixo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ da Placa"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memória da Placa (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO da Placa"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_O da Placa"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 da Placa"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "O número do seu telefone"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (ex: provedor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Número do telefone do provedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolha seu teclado"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de discagem"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de conexão: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de conexão: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Nome da conta (nome do usuário)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Senha da conta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "falhou ao montar: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partição extendida não suportada nessa plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Você tem um buraco em sua tabela de partição e eu não posso usá-lo.\n"
-"A única solução é mover suas partições primárias para ter o buraco próximo "
-"das partições extendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restauração pelo arquivo %s falhou: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro gravando no arquivo %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Algo ruim está acontecendo com o seu drive. \n"
-"O teste que checa a integridade dos dados falhou. \n"
-"Isso significa que gravar algo no disco resultará em lixo aleatório."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "tem que ter"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muito bom"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bom"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "talvez"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora da rede (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de Impressão"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Erro gravando no arquivo %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(módulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP do servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selecionar Coneção da Impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Como a impressora está conetada?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Com um servidor CUPS remoto, você não tem que configurar\n"
-"nenhuma impressora aqui; elas serão detectadas automaticamente.\n"
-"Se tiver dúvida, selecione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuração LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Sevidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "O endereço IP deve ser no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O número da porta deve ser numérico"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porta"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuração do estilo de inicialização"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detectando dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Usar auto detecção"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detectado %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Favor escolher em qual porta serial seu modem está conectado."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuração"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalando pacote %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalando pacote %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opções da impressora lpd Remota"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para usar uma fila de impressão lpd remota, você precisa\n"
-"dar o nome do host e o servidor de impressão e o nome da\n"
-"fila naquele servidor."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do host remoto"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opções de Impressão SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir em uma impressora SMB, você precisa\n"
-"dar o nome do host SMB (Nota! Ele pode ser diferente\n"
-"do host TCP/IP!) e possivelmente o endereço IP do servidor de impressão,\n"
-"como também o nome compartilhado para a impressora que você deseja acessar "
-"e\n"
-"qualquer informação aplicável sobre nome de usuário, senha e grupo de "
-"trabalho."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Host servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome compartilhado"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de trabalho"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opções de Impressão NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir em uma impressora NetWare, você precisar dar o\n"
-"nome do servidor de impressão NetWare (Nota! ele pode ser diferente\n"
-"do host TCP/IP!) como também o nome da fila de impressão para a impressora\n"
-"que você deseja acessar como qualquer nome de usuário e senha aplicável."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de Impressão"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome da Fila de Impressão"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opções da Impressora Socket"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir em uma impressora socket, você precisa prover\n"
-"o nome do host da impressora e a número da porta (opcional)."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nome do host da impressora"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nome do host da impressora"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Dispositivo de Impressão URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome da impressora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descrição"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lugar"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Isto está correto?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Conexão da Impressora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Qual tipo de impressora você tem?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Você quer testar a impressão?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Testar portas"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Sim, imprimir ambas as páginas de teste"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Padrão"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A pagina de teste foi mandado ao demónio de impressão,\n"
-"pode demorar um pouco até a impressora começar.\n"
-"Estado da impressão:\n"
-"%s\n"
-"\n"
-"A impressão funcionou corretamente?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A pagina de teste foi mandado ao demónio de impressão,\n"
-"pode demorar um pouco até a impressora começar.\n"
-"A impressão funcionou corretamente?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Fechar"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Fechando (desconectando) a rede"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Fechando (desconectando) a rede"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opções da impressora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "O nome da impressora deve conter apenas letras, números e o símbolo _"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Nenhuma impressora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Iniciando sua conexão..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor não configurado"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configurando rede"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Qual sistema de impressão você quer usar?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranóico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Qual sistema de impressão você quer usar?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selecionar Coneção da Impressora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Qual sistema de impressão você quer usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalando pacote %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opções da impressora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configurar Impressora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Você gostaria de configurar uma impressora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aqui estão as filas de impressão.\n"
-"Você pode adicionar mais ou modificar as existentes."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aqui estão as filas de impressão.\n"
-"Você pode adicionar mais ou modificar as existentes."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configurar rede"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo Normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Você quer testar a configuração?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuração da Internet"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Você quer testar a configuração?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Compartilhamento da Conexão à Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Conexão da Impressora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimindo página(s) de teste..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Você quer testar a configuração?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Você quer reiniciar a rede"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo banco de dados de drivers do CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuração de proxies"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Porta"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "O proxy deve ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "O número da porta deve ser numérico"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "O proxy deve ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Autologin"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Senha"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Nenhuma senha"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "As senhas não conferem"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Não posso adicionar partição ao RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Não posso gravar arquivo %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid falhou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid falhou (talvez o raidtools esteja faltando)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Sem partições suficientes para RAID nível %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Iniciar o sistema de som ALSA (Arquitetura Avançada de Som Linux)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, um agendador de comando periódicos"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd é usado para monitarar o estado da bateria e gravando-o via syslog.\n"
-"Ele também pode ser usado para desligar a máquina quando a bateria estiver "
-"fraca."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa comando agendados pelo comando at na hora especificado quando\n"
-"at estava rodando, e executa comandos grupos de comandos quando o uso de "
-"memória estiver baixo o suficiente."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron é um program UNIX padrão que executa progrmas especificados pelo\n"
-"usuaio em horas marcadas. vixie cron adiciona várias características ao "
-"UNIX\n"
-"cron básico, incluindo melhor segurança e melhores opções de configuração."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adiciona suporte ao mouse à aplicativos Linux com base em texto\n"
-"tal como o Midnight Commander. Ele também permitir copiar e colar "
-"utilizando\n"
-"o mouse e inclui suporte para menus pop-up no console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake executa uma detecção do hardware existente, e\n"
-"opcionalmente configura um novo/alterado hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache é um servidor World Wide Web. Ele é usado para servir arquivos\n"
-"HTML e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O internet superserver daemon (normalmente chamado inetd) inicia\n"
-"uma variedade de outros serviços de internet quando necessário. É "
-"responsável\n"
-"pela inicialização de vários serviços, incluindo telnet, ftp, rsh e rlogin. "
-"Disabilitando\n"
-"inetd, todos os serviços pela qual ele é responsável também são "
-"desabilitados."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Iniciar filtro de pacots para kernel Linux série 2.2, para criar\n"
-"um firewall para proteger sua máquina de ataques de rede."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Esse pacote carrega o mapa de teclado selecionado como\n"
-"um comando em /etc/sysconfig/keyboard. Isso pode ser selecionado usando o\n"
-"utilitário kbdconfig. Você deve deixar isso ativar para a maioria da "
-"máquinas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regeneração automática do heador do kernel no /boot para\n"
-"/usr/include/linux{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Detecção e configuração automática do hardware na inicialização."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf irá periodicamente executar várias tarefas durante a\n"
-"inicialização para manter a configuração do sistema"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd é o daemon de impressão requerido para o lpr funcionar corretamente.\n"
-"Ele é basicamente um servidor que organiza os trabalhos à(s) impressora(s)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Servidor Virtual Linux, utilizado para criar um servidor de alta\n"
-"performance e alta acessibilidade."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) é um Servidor de Nome de Domínio (DNS) que é usado para\n"
-"transformar nome de hosts para endereços IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta todos os pontos de montagem do Network File\n"
-"System (NFS), SMB (Gerenciador de Rede/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ativa/Desativa todas as interfaces de rede configuradas para iniciar\n"
-"na hora de inicialização."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS é um protocolo popular usado no compartilhamento de arquivos através\n"
-"de redes TCP/IP. Esse serviço provê a funcionalidade do servidor NFS, que é "
-"configurado através do arquivo /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS é um protocolo popular usado para compartilhar arquivos através de\n"
-"redes TCP/IP. Esse serviço provê a funcionalidade de trava de arquivos NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticamente ativa o Num Lock no console e XFree\n"
-"durante a inicialização."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Suporte para impressoras OKI-4w e compatíveis."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suporte PCMCIA é utilizado normalmente para suportar coisas como\n"
-"ethernet ou modems em laptops. Ele não será iniciado a não ser que "
-"estejaconfigurado,\n"
-"então é seguro te-lo instalado em máquinas que não precisam dele."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper gerencia conexões RPC, que são usadas por\n"
-"protocolos como NFS ou NIS. O servidor portmap deve estar rodando em "
-"máquinas\n"
-"que serão os servidores para os protocolos que utilizam o mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix é um Agente de Transporte de Correio, que é um programa\n"
-"que move mensagens entre uma máquina e outra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salva e restaura o entropy pool do sistema para melhor qualidade\n"
-"na geração randômica de número."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Determinar dispositivos raw como dispositovs de bloco\n"
-"(como partições), para o uso em aplicativos como o Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O daemon routed permite a atualização automática da tabela roteadora\n"
-"IP através do protocolo RIP. Enquanto o RIP é usado largamente em pequenas\n"
-"rede, protocolos de roteamento mais complexos são necessários em redes mais "
-"complexas."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protcolo rstat permite que usários da rede recebam\n"
-"informações sobre a perfomance de qualquer máquina na rede."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers pertmite que os usuários da rede identifiquem\n"
-"quem está logado na máquina correspondente do outro."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que usuários remotos peguem uma lista de todos os\n"
-"usuários logados em uma máquina rodando o daemon rwho (similar ao finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Iniciar o sistema de som da sua máquina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog é um aparato que muitos daemons usam para gravar mensagens\n"
-"em vários arquivos de log. É uma boa idéia sempre rodar o syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega os drivers para seus dispositivos usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Inicia o Servidor de Fontes X (é obrigatório para a execução do XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolha quais serviços devem ser inicializados automaticamente na "
-"inicalização"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Modo do sistema"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opções da impressora lpd Remota"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Servidor, Bancos de dados"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositivo"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "iniciado"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serviços e daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nenhuma informação adicional\n"
-"sobre este serviço, desculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "No boot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Status:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Setor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resto do mundo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Acesso à Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimídia - Gráficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolvimento"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centro de Controle"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interface de rede"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Host servidor SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jogos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalando pacote %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Eu não consigo ler sua tabela de partição, é muito defeituosa\n"
-"para mim. Eu irei tentar continuar limpando as partições defeituosas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuração pós-instalação"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuração do estilo de inicialização"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Parabéns!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Adicionar um usuário"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatando arquivo loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Seleção de Grupo de Pacotes"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Fila remota"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Remover Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Nome do usuário"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Favor testar o mouse"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Favor tentar novamente"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Favor tentar novamente"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Nenhuma senha"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Coneção LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Selecionar Coneção da Impressora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Favor escolher o layout do seu teclado."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Favor clicar em uma partição"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Favor testar o mouse"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nome do usuário"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Detecção de discos rigidos"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Nome do usuário"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opções do módulo:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuração da Rede"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Setup dos sistemas de arquivos"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opções"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Favor escolher em qual porta serial seu modem está conectado."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configuração da Rede"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaurar do disquete"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Outro"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaurar do arquivo"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaurar do arquivo"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizada"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/Aj_uda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaurar do arquivo"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Próximo ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Escolha pacotes a serem instalados"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Favor escolher o idioma a ser utilizado."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Arquivo de backup defeituoso"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Salvar no arquivo"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Favor testar o mouse"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Escolha os pacotes que você quer instalar"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuração da Rede"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuração da Rede"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Setup dos sistemas de arquivos"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "A Instalação do %s falhou. Ocorreram os seguintes erros:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "nenhuma placa de rede encontrada"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Pronto"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preparando instalação"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "restrito"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "restrito"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatar partições"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuração LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ponto de Montagem"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Escolha as partições que você quer formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Escritório"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Abortar"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impressora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Selecione arquivo"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impressora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Mensagem Inicial"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nenhum adaptador de rede em seu sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nenhum adaptador de rede em seu sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Sair da instalação"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Compartilhamento da Conexão à Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "O Compartilhamento da Conexão à Internet está ativo"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuração de compartilhamento da conexão à Internet já foi feita.\n"
-"Ela está ativa.\n"
-"\n"
-"O que você gostaria de fazer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desativar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "liberar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Desativando servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "O Compartilhamento da Conexão à Internet agora está desativado."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "O Compartilhamento da Conexão à Internet está desativado"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuração do compartilhamento da conexão à Internet já foi feito.\n"
-"Está desabilitado.\n"
-"\n"
-"O que você gostaria de fazer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ativar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Ativando servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "O Compartilhamento da Conexão à Internet agora está ativo."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Você está para configurar o compartilhamento da conexão à Internet do seu \n"
-"computador. Assim, outros computadores da sua rede local serão capaz de user "
-"a conexão à Internet deste computador.\n"
-"\n"
-"Nota: você precisa de um Adaptador de Rede dedicado para criar um Rede Local "
-"(LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (usando módulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nenhum adaptador de rede em seu sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nenhum adaptador de rede foi detectado em seu sistema. Favor executar a "
-"ferramenta de configuração de hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Existe apenas um adaptador de rede configurado em seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Irei configurar sua Rede Local (LAN) com esse adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Favor escolher qual adaptador de rede será conectado à su Rede Local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor não configurado"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuração do estilo de inicialização"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuração da Internet"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencial conflinto de endereço LAN encontra na configuração atual de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Configuração de Firewall detectado!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Atenção! Uma configuração de firewall foi detectada. Talvez você terá que "
-"fazer alguma correção manual após a instalação."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Configurando scripts, instalando programas, iniciando servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas instalando pacote %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tudo foi configurado.\n"
-"Você agora pode compartilhar sua conexão com outros computadores na sua Rede "
-"Local (LAN), usando a configuração automática de rede (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "A configuração já foi feita, mas está desativada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "A configuração já foi feita e está desativada."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "O Compartilhamento de Conexão à Internet nunca foi configurado."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuração do compartilhamento da Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bem-vindo ao utilitário de Compartilhamente da Conexão à Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Clique em ``Configurar'' se você quiser abrir o ajudante de configuração."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuração da Rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Apagar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a apagar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acesso à Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar Acesso à Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar Rede Local (LAN)..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Ajudante..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor aguarde... Aplicando a configuração"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Conectado"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Não conectado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desconectar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Você não possui nenhuma interface configurada.\n"
-"Configure-as primeiro clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo da inicialização"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado na inicialização"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Ativo"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Ativo"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Você não possui nenhuma conexão à Internet.\n"
-"Crie uma clicando em 'Configurar'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuração da conexão à Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuração da conexão à Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de conexão: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parâmetros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Placa Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Opções do nível de segurança"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de Controle"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolha a ferramente que você quer usar"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadense (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandês"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serial"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "utilização: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Favor escolher o layout do seu teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Você quer que o BackSpace retorne o Delete no console?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Mudar Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Favor inserir o Cd-Rom de instalação no seu drive e pressionar em Ok.\n"
-"Se você não o tiver, pressione em Cancelar para sair da atualização on-line."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Incapaz de iniciar a atualização on-line!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "draknet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Arquivo/_Novo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Arquivo/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Arquivo/_Salvar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Arquivo/Salvar _Como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Arquivo/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opções"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opções/Teste"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/Aj_uda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Sobre"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nome do usuário"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Mensagem Inicial"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Máquina:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Máquina:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuração LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "dispositivo"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatando"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuração"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Salvar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Favor escolher o tipo do seu mouse."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nenhum usb_serial encontrado\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Deseja emulação de 3 botões?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Selecione uma placa gráfica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo de boot"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuração de Firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuração de Firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Você já tem um firewall configurado.\n"
-"Clique em configurar para alterar ou remover o firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Clique em configurar para criar um firewall padrão"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolha seu idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Selecione a classe da instalação"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecção de discos rigidos"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolha seu teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Segurança"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Setup dos sistemas de arquivos"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar partições"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Escolha pacotes a serem instalados"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Adicionar um usuário"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar serviços"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalar gerenciador de inicialização"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Criar um disco de inicialização"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Sair da instalação"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"configurador pequenoFirewall\n"
-"\n"
-"Isso configura um firewall pessoal para essa máquina Mandrake Linux.\n"
-"Para um firewall dedicado potente, favor procurar a distribuição\n"
-"especilizada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Agora lhe perguntaremos sobre qual serviços você gostaria de permitir\n"
-"a Internet se conectar. Por favor, pense cuidadosamente sobre essas\n"
-"perguntas, já que a segurança do seu computador é importante.\n"
-"\n"
-"Atenção, se você não estiver usando um desses serviços, retire o firewall "
-"dele. Você pode alterar essa configuração a qualquer hora,\n"
-"basta re-executar esse aplicativo!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Você está executando um servidor web nesta máquina que você precisa\n"
-"que toda a Internet veja? Se você estiver executando um servidor web que\n"
-"precisa ser acessado por esta máquina apenas, favor responder NÃO aqui.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Você está executando um servidor de nome nesta máquina? Se você não\n"
-"configurou um que dê a sua informação de zona e IP para toda a Internet,\n"
-"favor responder não.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Você quer permitir receber conexões Secure Shell (ssh)? Isso é um\n"
-"substituto da telnet que você pode usar para login. Se você estiver\n"
-"usando telnet agora, você deveria mudar definitivamente para ssh. telnet\n"
-"não é codificada -- então alguns agressores podem roubar sua senha.\n"
-"ssh é codificada e não permite esse tipo de roubo."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Você quer permitir receber conexões telnet?\n"
-"Isso é terrivelmente inseguro, como explicado na tela anterior. Nós\n"
-"fortemente recomendamos responder Não aqui e utilizar ssh no lugar\n"
-"da telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Você está executando um servidor FTP que precisa ser acessível pela\n"
-"Internet? Se você estiver, nós realmente recomendamos que você user\n"
-"apenas para transferências anônimas. Qualquer senha enviada por FTP pode\n"
-"ser roubada por invasores, desde que FTP não usa codificação de senhas.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Você está executando um servidor de mensagens aqui? Se você esiver\n"
-"mando mensagens pelo pine, mutt ou qualquer outro cliente de texto,\n"
-"você provavelmente está. Caso contrário, você deve retirar o firewall dele.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Você está executando um servidor POP ou IMAP aqui? Ele seria\n"
-"utilizado para hospedar contas não baseadas na web para\n"
-"pessoas através desta máquina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Você parece estar utilizando um kernel 2.2. Se seu número IP\n"
-"for automaticamente dado por um computador em sua casa ou \n"
-"escritório (determinado dinamicamente), nós precisamos permitir\n"
-"isso. É esse o caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"O seu computador está sincronizando a hora com outro computador?\n"
-"Normalmente, isso é utilizado por organizações Unix/Linux médias-grandes\n"
-"para sincronizar o tempo para relatório, etc. Se você não for\n"
-"parte de uma grande empresa ou nunca ouviu sobre isso, você \n"
-"provalvemente não está."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Configuração completa. Essas alterações podem ser gravadas no disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Não foi possível abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Erro arbindo %s para gravação: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configuração de Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Por favor aguarde, preparando instalação"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computador de rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, servidor SMB, servidor Proxy, servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Escritório"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estação de Trabalho Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot e seu Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estação de Trabalho"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Firewall/Roteador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nome do Domínio e Servidor de Informação da Rede"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de escritório: processadores de texto (kword, abiword), tabelas "
-"(kspread, gnumeric), visualizadores pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-"Ferramentas relacionadas à áudio: tocadores de mp3 ou midi, mixers, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livros e Howto's sobre Linux e Software Livre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estação de Trabalho KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimídia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de ferramentas para mensagens, notícias, web, transferências de "
-"arquivos e bate-papo"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, Bancos de dados"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de banco de dados PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ferramentas para facilitar a configuração do seu computador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimídia - Som"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitários"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentação"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas do Console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Servidor de mensagens postfiz, servidor de notícias Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estação de Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estação de Multimídia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configuração LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mais Desktops Gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"O K Desktop Environment, o ambiente gráfico básico acompanhando de uma "
-"coleção de ferramentas"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ambiente Gráfico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache e Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para criar e gravar CD's"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estação de Trabalho de Escritório"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gráficos como o The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Bibliotecas de desenvolvimento C e C++, programas e arquivos include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor de Rede"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correio/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estação de Jogos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Editor e visualizadores de Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimídia - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimento: arcade, estratégia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de ferramentas para ler e enviar mensagem e notícias (pine, mutt, "
-"tin...) e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivamento, emuladores, monitoramento"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finança Pessoal"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Um ambiente gráfico com um conjunto de aplicativos e ferramenas de desktop "
-"amigáveis"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para protocolos diferentes incluindo ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet Gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas editores/tocadores de som e vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros Desktops Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, ferramentas de arquivos, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para gerenciar seu dinheiro, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gereciador de Informação Pessoal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimídia - Gravação de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estação de Trabalho Científica"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Abortar"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Pronto"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Escolha o usuário:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Impressora remota"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Agora você poder prover as opções para o módulo %s."
-
-#~ msgid "Low"
-#~ msgstr "Baixo"
-
-#~ msgid "Medium"
-#~ msgstr "Médio"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Algumas melhoras para esse nível de segurança, a principal é que existem\n"
-#~ "mais avisos e testes de segurança."
-
-#~ msgid "mount failed"
-#~ msgstr "falhou ao montar"
diff --git a/perl-install/share/po/ro.po b/perl-install/share/po/ro.po
deleted file mode 100644
index 82e30c776..000000000
--- a/perl-install/share/po/ro.po
+++ /dev/null
@@ -1,12989 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (c) 2000 MandrakeSoft
-# Florin Grad <florin@mandrakesoft.com>, 1999-2000
-# Dragos Marian Barbu <dragosb@softhome.net>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 7.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-04-30 2:55+0200\n"
-"Last-Translator: Florin Grad <florin@mandrakesoft.com>\n"
-"Language-Team: romanian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Citirea configuraþiei"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Carte graficã"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Alegeþi o carte graficã"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Alegeþi un server X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Alegeþi un server X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Server X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, fuzzy, c-format
-msgid "XFree %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:363
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ce tip de intrãri doriþi sã adãugaþi ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-#, fuzzy
-msgid "XFree configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Alegeþi memoria pentru cartea graficã"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Alegeþi opþiunile pentru server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Alegeþi un  monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Cei doi parametri critici sunt rata de actualizare verticalã, care este "
-"rata\n"
-"la care întregul ecran e actualizat ºi mai important rata de sincronizare\n"
-"orizontalã, care este rata la care liniile de scan sunt afiºate.\n"
-"Este FOARTE IMPORTANT sã nu specificaþi un tip de monitor cu interval de\n"
-"sincronizare care depãºeºte capabilitãþile monitorului vostru: puteþi\n"
-"distruge monitorul în acest fel.\n"
-"Dacã nu sunteþi sigur, alegeþi parametri conservativi."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Rata de actualizare orizontalã"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Rata de actualizare verticalã"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor nu a fost încã configurat"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Cartea graficã nu a fost configuratã încã"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezoluþia nu a fost încã aleasã"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../Xconfigurator.pm_.c:650
-#, fuzzy
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Atenþie: testul e periculos pentru aceastã carte graficã"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test de configuraþie"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"reîncercaþi dupã ce aþi modificat ceva parametri"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "A apãrut o eroare:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Testul se va termina în %d secunde"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Configuraþia e corectã"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Eroare, reîncercaþi dupã ce aþi modificat ceva parametri"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezoluþie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Alegeþi rezoluþia ºi culorile"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carte graficã: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Server XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Deplaseazã"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Expert"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Afiºaþi tot"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezoluþii"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatura : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip de mouse : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Periferic pentru mouse: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecvenþa orizontala pentru monitor : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecvenþa verticala pentru monitor : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carte graficã : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Carte graficã : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memorie graficã : %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Opþiuni pentru culori:"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, fuzzy, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezoluþii"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Server XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, fuzzy, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Server XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pregãtesc configuraþia X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ce doriþi sã faceþi ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Alegeþi un alt tip de monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Alegeþi un alt tip de carte graficã"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Schimbaþi opþiunile server-ului"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Alegeþi o altã rezoluþie"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Afiºeazã informaþiile"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testeazã din nou"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Ieºire"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Pastraþi configuraþia IP curentã"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Sever X la demaraj"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Pot sã configurez calculatorul sa demareze automat X la demaraj.\n"
-"Doriþi sa demaraþi X cînd redemaraþi ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Vã rog reconectaþi-vã ca %s pentru a activa schimbãrile"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Vã rog delogaþi-vã ºi folosiþi Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 de culori (8 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mii de culori (15 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mii de culori (16 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioane de culori (24 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliarde de culori (32 biþi)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB sau mai mult"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 la 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 la 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatibil, 1024x768 la 87 Hz întreþesut (nu 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 la 87 Hz întreþesut, 800x600 la 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Extins, 800x600 la 60 Hz, 640x480 la 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Ne-Întreþesut SVGA, 1024x768 la 60 Hz, 800x600 la 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Înaltã frecvenþã SVGA, 1024x768 la 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frecvenþã care e capabil de 1280x1024 la 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frecvenþã care e capabil de 1280x1024 la 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frecvenþã care e capabil de 1280x1024 la 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor care e capabil de 1600x1200 la 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor care e capabil de 1600x1200 la 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primul sector al partiþiei de demaraj"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primul sector al discului (MBR)"
-
-#: ../../any.pm_.c:120
-#, fuzzy
-msgid "SILO Installation"
-msgstr "Instalare LILO/grub"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Unde doriþi sã instalaþi Gestionarul de demaraj ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalare LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-#, fuzzy
-msgid "Yaboot"
-msgstr "Root"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opþiunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Opþiunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:169
-#, fuzzy
-msgid "Bootloader installation"
-msgstr "Opþiunile principale ale gestionarului de demaraj"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Periferic de demaraj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nu funcþioneazã cu BIOS-urile vechi)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mod video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Timp de aºteptare înaintea demarãrii imaginii standard"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Parola"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Parola (din nou)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limiteazã opþiunile liniei de comandã"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limiteazã"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Curãþã /tmp la fiecare demaraj"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizeazã cantintatea de  RAM dacã e necesar (am gãsit %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activeazã profilurile multiple"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Introduceþi cantintatea de RAM în MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opþiunea ``Limiteazã opþiunile liniei de comandã'' e inutilã fãrã parolã"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Încercaþi din nou"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Parolele nu corespund"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Standard"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Acestea sunt diferitele intrãrile.\n"
-"Puteþi sã mai adãugaþi ºi altele sau sã schimbaþi cele existente."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Adaugã"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gata"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Modificã RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ce tip de intrãri doriþi sã adãugaþi ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Alt SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Alt SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Alt SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imagine"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Citeºte-Scrie"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigur"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etichetã"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "ªterge intrarea"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Eticheta goalã nu e permisã"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Trebuie sã aveþi o partiþie swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Aceastã etichetã nu e permisã"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Am gãsit interfaþele %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Aveþi o altã interfaþa?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Aveþi vreo interfaþã %s ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nu"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Vezi info hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalarea pilotului pentru %s cartea %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Care %s pilot sã încerc?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"În anumite cazuri, pilotul %s necesitã informaþii suplimentare pentru a\n"
-"funcþiona corect, dar funcþioneazã bine ºi fãrã. Doriþi sã specificaþi\n"
-"opþiuni suplimentare sau îi permiteþi sã interogheze calculatorul pentru\n"
-"informaþiile necesare? Ocazional, interogarea poate bloca calculatorul,\n"
-"dar n-ar trebui sã produce nici o deteriorare."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autoprobeazã"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specificaþi opþiunile"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Puteþi furniza acum opþiunile modulului %s.\n"
-"Opþiunile sunt în formatul ``nume=valoare nume2=valoare2 ...''.\n"
-"de exemplu, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opþiuni pentru module:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Încãcarea modulului %s a eºuat.\n"
-"Doriþi sãîncercaþi cu alþi parametri ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(deja adãugat %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Aceasta parolã e prea simplã"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Va rog înscrieþi numele utilizatorului"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Numele utilizatorului trebuie sa conþinã numai caractere minuscule, numere, "
-"`-' ºi `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Acest nume de utilizator e deja adãugat"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Adãugaþi un utilizator"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Intraþi un utilizator\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Acceptare utilizator"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nume real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Numele utilizatorului"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icoanã"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Pot sã configurez calculatorul sa demareze automat X la demaraj.\n"
-"Doriþi sa demaraþi X cînd redemaraþi ?"
-
-#: ../../any.pm_.c:833
-#, fuzzy
-msgid "Choose the default user:"
-msgstr "Alegeþi noua mãrime"
-
-#: ../../any.pm_.c:834
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Alegeþi unealta pe care doriþi sã o folosiþi"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Vã rog, alegeþi o limbã."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Puteþi sã alegeþi alte limbi care vor fi disponibile dupã instalare"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Adãugaþi un utilizator"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-#, fuzzy
-msgid "Custom"
-msgstr "Personalizat"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Estimare"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Acest pachet trebuie actualizat\n"
-"Sunteþi sigur cã doriþi sã-l deselectaþi ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Anuleazã"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bun venit Piraþilor"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Slab"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Ridicat"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Ridicat"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiac"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Va trebui sã folosiþi acest nivel cu grijã. Aceasta face ca sistemul sã fie\n"
-"mai uºor de folosit, dar foarte sensibil: nu trebuie sã fie folosit pentru "
-"un\n"
-"calculator conectat cu altele de pe Internet. Nu existã nici o parolã de\n"
-"acces."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parolele sunt acum activate, dar utilizarea lui ca un calculator într-o\n"
-"reþea tot nu recomandatã."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Acest a nivelul de securitate standard recomandat pentru un calculator care\n"
-"va fi conectat ca un client la Internet. Nu existã verificãri de securitate."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Cu acest nivel de securitate, utilizarea acestui calculator ca server\n"
-"devine posibilã. Securitatea este destul de ridicatã pentru a folosi acest\n"
-"sistem ca server care acceptã conexiuni de la mulþi clienþi."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Avem funcþionalitãþile nivelului 4 de securitate dar acum sistemul e\n"
-"complet închis. Securitatea e la maximum."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Alegeþi nivelul de securitate"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Alegerea nivelului de securitate"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Alegeþi opþiunile pentru server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, fuzzy, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bun venit la gestionarul de sisteme de operare %s!\n"
-"\n"
-"Pentru a afisa diferitele posibilitati, apasati <TAB>.\n"
-"\n"
-"Pentru a demara unul dintre ele, scrieti-i numele si apasati <ENTER> sau\n"
-"asteptati %d secunde pentru demararea din oficiu.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bun venit la gestionarul de sisteme de operare GRUB!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Folositi tastele %c si %c pentru selectarea intrarii puse in evidenta."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Apasati enter pentru a demara OS-ul selectat, 'e' pentru a edita"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandele inainte de a demara, sau 'c' pentru linia de comanda."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Intrarea selectata va demara dupa %d secunde"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nu e destul spaþiu în /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Meniu de Start"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Unde doriþi sã instalaþi Gestionarul de demaraj ?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-#, fuzzy
-msgid "/_File"
-msgstr "Fiºiere:\n"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Alegeþi un alt tip de monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Nume de domeniu"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Periferic de demaraj"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Configuraþi X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "Testul se va termina în %d secunde"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Imposibil de adãugat o alta partiþie"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Puteþi sã alegeþi alte limbi care vor fi disponibile dupã instalare"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Anuleazã"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgian"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "German"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grec"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norvegian"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Afiºeazã"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italian"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "serie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Vã rog faceþi mai întîi o copie a datelor dumneavoastrã"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Citiþi cu atenþie!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Dacã doriþi sã folosiþi aboot, asiguraþi-vã sã lãsaþi un spaþiu liber\n"
-"(2048 de sectoare sunt de ajuns) la începutul discului"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Eroare"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Alegeþi acþiunea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Aveþi o singurã partiþie mare FAT\n"
-"(în general folositã de MicroSoft  Dos/Windows).\n"
-"Va sugerez sã redimensionaþi mai întîi acea partiþie\n"
-"faceþi clic pe ea ºi apoi pe \"Redimensioneazã\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Vã rog faceþi clic pe o partiþie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalii"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "montare eºuatã"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Gol"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Alt tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipul de fiºiere sistem: "
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Creazã"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Foloseºte ``%s'' în loc"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "ªterge"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Foloseºte ``Demontare' mai întîi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Dupã schimbarea tipului de partiþie %s, toate datele de pe aceasta "
-"partiþievor fi pierdute"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Alegeþi acþiunea"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Creeazã o nouã partiþie"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Trece în mod expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Trece în mod normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Anuleazã"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Continuaþi totuºi?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Ieºire fãrã a înregistra"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Ieºire din program fãrã a scrie în tabloul de partiþii ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto aloca"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "ªterge tot"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Afiºeazã informaþiile"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Toate partiþiile principale sunt alocate"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Imposibil de adãugat o alta partiþie"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Pentru a avea mai multe partiþii, ºtergeþi una pentru a putea crea una de "
-"tip Extended "
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Scrie tabloul de partiþii"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Salveazã tabelul de partiþii"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Salveazã tabelul de partiþii"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Salveazã tabelul de partiþii"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automontare automatã a perifericelor extractibile"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selecþioneazã fiºierul"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Tabloul de partiþie salvat nu are aceeaºi mãrime\n"
-"Sã continui totuºi ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Avertisment"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Introduceþi o dischetã în periferic\n"
-"Toate datele de pe aceastã dischetã vor fi pierdute"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Încercare de salvare a tabloului de partiþii"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Afiºeazã informaþiile"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punct de montaj"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-#, fuzzy
-msgid "Options"
-msgstr "Informaþie"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensioneazã"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Deplaseazã"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formateazã"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montaj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Adaugã la RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Adaugã la LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demonteazã"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "ªterge din RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "ªterge din LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificã RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Foloseºte pentru loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Creeazã o nouã partiþie"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector de început: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Mãrimea în MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipul de fiºiere: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punct de montaj: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferinþã: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatarea fiºierului loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Schimbã tipul partiþiei"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Ce limbã doriþi ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Unde doriþi sã montaþi fiºierul loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Unde doriþi sã montaþi perifericul %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nu pot sã desfiinþez acest punct de montaj pentru cã partiþia e "
-"folositãpentru loopback.\n"
-"ªtergeþi loopback-ul mai întîi"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculeazã salturile de fiºiere FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensioneazã"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Toate datele de pe aceasta partiþie ar trebui salvate mai întîi"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Dupã redimensionarea partiþiei %s toate datele de pe aceasta partiþie vor fi "
-"pierdute"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Alegeþi noua mãrime"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Mãrimea în MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "La ce sector doriþi sa schimbaþi ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Schimbã"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Schimbã partiþia..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Alegeþi un RAID existent la care sã adãugaþi"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nou"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Alegeþi un LVM existent la care sã adãugaþi"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Aceastã partiþie nu poate fi folositã pentru loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Numele fiºierului loopback"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nume real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Fiºier deja folosit de un alt loopback, alegeþi un altul"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fiºierul existã deja. Sã-l folosesc ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opþiuni pentru module:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "periferic: "
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "mãrimea porþiunii "
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Atenþie: aceasta operaþie e periculoasã."
-
-#: ../../diskdrake/interactive.pm_.c:906
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Ce tip de imprimanta aveþi?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Îmi pare rãu dar nu voi accepta sã creez /boot atît de departe ê disc (pe un "
-"cilindru > 1024).\n"
-"Sau folosiþi LILO soi nu va funcþiona, sau nu folosiþi LILO ºi atunci nu\n"
-"aveþi nevoie de /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partiþia pe care aþi selecþionat-o pentru adãugare ca root (/) e fizic "
-"localizatã dincolo\n"
-"de cilindru 1024 pe discul dur ºi nu aveþi nici o partiþie /boot.\n"
-"Dacã planificaþi sã folosiþi LILO ca gestionar de demaraj, asiguraþi-vã "
-"cãaþi adãugat o partiþie /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-#, fuzzy
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Aþi selectat o partiþie software root en tant que RAID.\n"
-"Nici un gestionar de boot nu e capabil sã gereze aceasta fãrã\n"
-"o partitie /boot. Folosiþi deci o partiþie /boot dacã doriþi sã folosiþi\n"
-"lilo sau grub."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabloul de partiþii al perifericului %s va fi scris pe disc!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Va trebui sã redemaraþi pentru ca schimbãrile sa fie luate în considerare"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Dupã formatarea partiþiei %s toate datele de pe aceasta partiþie vor fi "
-"pierdute"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatare"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatarea fiºierului loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatarea partiþiei %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid a eºuat"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Creeazã o nouã partiþie"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Creeazã o nouã partiþie"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezoluþii"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Periferic: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Litera perifericului DOS: %s (doar o presupunere)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nume: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Mãrimea: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectori"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "De la cilindrul %d la cilindrul %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neformatat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Fiºier(e) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partiþia demaratã din oficiu\n"
-"    (pentru demaraj MS-DOS, nu pentru lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Mãrimea porþiunii %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discuri-RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Numele fiºierului loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Mãrime: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylinders, %s heads, %s sectors\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discuri-LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipul tabloul de partiþii : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "pe bus-ul %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "Partiþie"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipul de fiºiere: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Aceastã parole e prea simplã (ar trebui sã fie de cel puþin %d caractere)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Parolele nu corespund"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Schimbã tipul partiþiei"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Vã rog faceþi clic pe o partiþie"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Server DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Formatarea %s eºuatã"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nu ºtiu cum sã formatez %s în tipul %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eroare la demontarea %s: %s"
-
-#: ../../fsedit.pm_.c:21
-#, fuzzy
-msgid "simple"
-msgstr "Fiºier"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Punctele de montaje trebuie sa înceapã cu un /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "O partiþie cu punctul de montaj %s existã deja\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Aveþi nevoie de un sistem de fiºiere serios (ext2, reiserfs) pentru\n"
-"acest punct de montaj.\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Aveþi nevoie de un sistem de fiºiere serios (ext2, reiserfs) pentru\n"
-"acest punct de montaj.\n"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eroare la citirea  %s pentru a scrie: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"O eroare a apãrut - nu am gãsit nici un periferic pentru a instala noi "
-"fiºiere\n"
-"sistem. Verificaþi harware-ul pentru a detecta cauza acestei probleme."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nu aveþi nici o partiþie!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Puteþi alege acum serviciile ce doriþi sã iniþializaþi la demararea\n"
-"calculatorului. Dacã plasaþi mouse-ul deasupra rubricii, un mic balon de\n"
-"ajutor va apare pentru a descrie rolul serviciului respectiv."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vã rog selectaþi portul corect. De exemplu, portul COM1 din Windows e\n"
-"numit ttyS0 în Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (de la LInux LOader) ºi Grub sunt gestionare de demaraj. Amîndoi sunt\n"
-"capabili sã demareze Linux sau un alt sistem prezent în calculator.\n"
-"În mod normal, aceste alte sisteme de operare sunt detectate ºi instalate\n"
-"corect. Dacã cumva nu e cazul, puteþi adãuga o intrare manual în acest\n"
-"ecran. Aveþi grijã sã alegeþi parametrii cei buni.\n"
-"\n"
-"\n"
-"Puteþi de asemenea sã interziceþi accesul acestor alte sisteme a altor \n"
-"utilizatori, caz în care ar trebui sã ºtergeþi intrãrile acestor sisteme.\n"
-"În acest ultim caz însã, veþi avea nevoie de un floppy de demaraj pentru\n"
-"a putea le demara!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Va trebui sã indicaþi unde sã puneþi informaþia necesarã pentru a porni "
-"Linux.\n"
-"\n"
-"\n"
-"În general alegeþi \"Primul sector al discului\". Alegeþi altceva doar dacã "
-"ºtiþi ce faceþi."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nu pot sã folosesc difuzia fãrã nici un domeniu NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Introduceþi o dischetã în perifericul %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Eroare la citirea fiºierului %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Trebuie sã aveþi o partiþie root.\n"
-"Pentru aceasta, creaþi o partiþie (sau faceþi clic pe un existentã).\n"
-"Alegeþi apoi acþiunea ``Punct de montaj'' ºi fixaþi-o la '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Trebuie sã aveþi o partiþie swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N'aveþi nici o partiþie swap\n"
-"\n"
-"Sã continui totuºi?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Trebuie sã aveþi o partiþie swap"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Use free space"
-msgstr "Foloseºte pentru loopback"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-#, fuzzy
-msgid "Use existing partition"
-msgstr "Formatarea partiþiilor"
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Încercare de salvare a tabloului de partiþii"
-
-#: ../../install_interactive.pm_.c:109
-#, fuzzy
-msgid "Use the Windows partition for loopback"
-msgstr "Foloseºte pentru loopback"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ce partiþe doriþi sã folosiiþ pentru a instala Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Alegeþi mãrimile"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Mãrimea partiþiei root în MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Mãrimea partiþiei swap în MB:: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculeazã salturile de fiºiere FAT"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AVERTISMENT!\n"
-"\n"
-"DrakX va redimensiona acum partiþiile Windows. Aveþi grijã: aceastã "
-"operaþie\n"
-"est periculoasã. Dacã nu aþi fãcut-o deja, ar trebui mai întîi sã pãrãsiþi\n"
-"instalarea ºi ºa executaþi scandisk în Windows (ºi defrag opþional), apio\n"
-"reîncepeþi instalarea. Ar trebui de asemenea sã faceþi o copie a datelor\n"
-"dumneavoastrã. Dacã sunteþi sigur, apãsaþi Ok."
-
-#: ../../install_interactive.pm_.c:147
-#, fuzzy
-msgid "Which size do you want to keep for windows on"
-msgstr "La ce sector doriþi sa schimbaþi ?"
-
-#: ../../install_interactive.pm_.c:148
-#, fuzzy, c-format
-msgid "partition %s"
-msgstr "Partiþie"
-
-#: ../../install_interactive.pm_.c:155
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Redimensionarea automatã a eºuat"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Dupã redimensionarea partiþiei %s toate datele de pe aceasta partiþie vor fi "
-"pierdute"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Formatarea partiþiilor"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, fuzzy, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Puteþi partiþiona acum discul %s dumneavoastrã dur\n"
-"Cînd aþi terminat, nu uitaþi sã înregistraþi folosind `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nu aveþi nici o partiþie Windows"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Imposibil de adãugat o alta partiþie"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Tipul tabloul de partiþii : %s\n"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Configuraþie reþea"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Oprire reþea"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"A apãrut o eroare pe care nu ºtiu sã o interpretez în mod corect.\n"
-"Continuaþi pe riscul dumneavoastrã."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplicaþi pounctul de montaj %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Cîteva pachete importante nu s-au instalat corect.\n"
-"Sau aveþi o problemã cu perifericul de cdrom sau cu \n"
-"cdrom-ul propriu-zis. Folosiþi comanda \"rpm -qpl \n"
-"Mandrake/RPMS/*.rpm\" pentru a verifica cdrom-ul pe un\n"
-"sistem instalat.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bine aþi venit la %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nici dischetã disponibilã"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Începe etapa `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Tip de instalare"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Vã rog alegeþi unul din urmãtoarele tipuri de instalare"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Mãrimea totalã a grupurilor selectate e în jur de %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Dacã doriþi sã instalaþi mai puþin decît aceastã mãrime,\n"
-"selectaþi procentul pachetelor pe care doriþi sã le instalaþi.\n"
-"\n"
-"Un procent slab va instala numai pachetele cele mai inmportante;\n"
-"un procent de 100% va instala toate pachetele selectate."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Nu aveþi spaþiu pe discul dunmeavoastrã decît pentru %d%% al acestor\n"
-"pachete.\n"
-"\n"
-"Dacã doriþi sã instalaþi mai puþin decît atît,\n"
-"selectaþi procentul pachetelor pe care doriþi sãle instalaþi.\n"
-"Un procent slab nu va installa decît pachetele cele mai importante;\n"
-"un procent de %d%% va instala cît de multe pachete va fi posibil."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Veþi putea sã le alegeþi mai în detaliu la etapa urmãtoare."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procentul pachetelor de instalat"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selectarea grupurilor de pachete"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selectare individualã a pachetelor"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mãrime totalã: %d / %d MB "
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pachet defectuos"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nume: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versiune: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Mãrime: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importanþã: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nu aveþi destul spaþiu pentru a instala acest pachet"
-
-#: ../../install_steps_gtk.pm_.c:422
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Pachetele urmãtoare urmeazã sã fie dezinstalate"
-
-#: ../../install_steps_gtk.pm_.c:423
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Urmãtoare pachete vor fi instalate/ºterse"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Nu puteþi selecta/deselecta acest pachet"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Acesta este un pachet indispensabil ºi nu poate fi deselectat"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nu puteþi deselecta aces pachet. E deja instalat"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Acest pachet trebuie actualizat\n"
-"Sunteþi sigur cã doriþi sã-l deselectaþi ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nu puteþi deselecta acest pachet. Trebuie acualizat."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalare"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Înregistreaza pe dischetã"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Selectare individualã a pachetelor"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Dezinstalare"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "În curs de instalare"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimare"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Timp rãmas "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Pregãtesc instalarea"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pachete"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalarea pachetului  %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-#, fuzzy
-msgid "Accept"
-msgstr "Acceptare utilizator"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#, fuzzy
-msgid "Refuse"
-msgstr "Redimensioneazã"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Schimbaþi Cd-Rom-ul!\n"
-"\n"
-"Vã rog introduceþi Cd-Rom etichetat \"%s\" ºi apoi apãsaþi Ok.\n"
-"Dacã nu-l aveþi, apãsaþi Anuleazã pentru a evita instalarea de pe acest Cd-"
-"Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Sã continui totuºi?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "O eroare a apãrut la ordonarea pachetelor:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "A fost o eroare la instalarea pachetelor:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "A apãrut o eroare"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastaturã"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Alegeþi tastatura."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Ce tip de instalare doriþi?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "Instalare/Actualizare"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Este vorba de o instalare sau de o actualizare ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomandat"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualizare"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Selectare individualã a pachetelor"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port Mouse"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Pe ce port serie este conectat mouse-ul?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuraþie cartele PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configuraþia IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nici o partiþie disponibilã"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Alegeþi punctele de montaj"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nu pot citi tabloul de partiþii, e prea deteriorat dupã mine :(\n"
-"Voi încerca sã continui ºtergînd partiþiile greºite"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake a eºuat la citirea corectã a tabloului de partiþii.\n"
-"Continuaþi pe riscul dumneavoastrã!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "N'am gãsit nici o partiþie root"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partiþia Root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Care e partiþia root (/) a sistemului dumneavoastrã?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Trebuie sã redemaraþi pentru a înregistra modificãrile tabloului de partiþii"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Alegeþi partiþiile pe care doriþi sa le formataãi"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Sã verific blocurile defectuoase?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatarea partiþiilor"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Crearea ºi formatarea fiºierului %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Swap insuficient pentru a termina instalarea, mai adãugaþi ceva"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Cãutarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Cautarea pachetelor de actualizat"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, fuzzy, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sistemul dumneavoastrã nu ar destul spaþiu disponibil pentru instalare\n"
-"sau actualizare"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Normal"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Minimum (%dMB)"
-msgstr "(%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomandat"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaureazã din dischetã"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaureazã din dischetã"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Selectarea grupurilor de pachete"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Introduceþi o dischetã în perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Înregistreaza pe dischetã"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Alegeþi pachetul de instalat"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Aºteptare"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Dacã aveþi toate CD-urile din lista de mai jos, apãsaþi Ok.\n"
-"Dacã nu aveþi nici unul din aceste CD-uri, apãsaþi Anuleazã.\n"
-"Dacã nu vã lispsesc decît cîteva CD-uri, deselectaþi-le ºi faceþi click pe "
-"Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etichetat \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pregãtesc instalarea"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"instalarea pachetului %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Introduceþi o dischetã în perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Introduceþi uo dischetã goalã în perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Aveþi acum posibilitatea de a recupera de pe Internet programele destinate\n"
-"criptajului.\n"
-"\n"
-"AVERTISMENT:\n"
-"\n"
-"Din cauza diferitelor cerinþe generale aplicabile la aceste programe în\n"
-"funcþie de diferite jurisdicþii, clientul ºi/sau utilizatorul final al\n"
-"acestor programe ar trebui sã se asigure cã jurisdicþia îi permite sã\n"
-"foloseascã sau sã stocheze aceste programe.\n"
-"\n"
-"Încãlcarea eventualã a unei interziceri în acest domeniu ar putea sã fie\n"
-"sacþionatã sever de jurisdicþia dumneavoastrã.\n"
-"\n"
-"În nici un caz MandrakeSoft sau unul dintre fabricanþii sãi ºi/sau\n"
-"furnizorii sãi n'ar putea sã poarte responsabilitatea unor deteriorãri\n"
-"indirecte sau accidentale (incluzînd, dar fãrã as e limita la pierderi\n"
-"sau profituri, întreruperi de afaceri, pierdere a datelor comerciale ºi\n"
-"alte pierderi ºi unele indemnizãri eventuale din cauza unor decizii)\n"
-"suscitate în urma folosirii, posesiei, sau a simplei recuperãri a acestor\n"
-"programe, la care clientul sau/ºi utilizatorul final ar avea acces dupã\n"
-"acceptarea prezentului acord.\n"
-"\n"
-"\n"
-"Pentru orice întrebãri cu privire a acestui acord, vã rog contactaþi\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Contactarea oglinzii pentru recuperarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Alegeþi o oglindã de la care sã recuperaþi pachetele"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Contactarea oglinzii pentru recuperarea pachetelor disponibile"
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Care e folosinþa sistemului dumneavoastrã?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Ceasul dumneavoastrã hardware e fixat la GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Coadã distantã:"
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "Imprimantã localã"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Aveþi o altã interfaþa?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "Mouse USB"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Imprimantã"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Foloseºte NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Imprimantã localã"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Alegeþi parola pentru root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nici o parolã"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Aceastã parole e prea simplã (ar trebui sã fie de cel puþin %d caractere)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentificare"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentificare"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autentificare NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domeniu NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Server NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"O dischetã personalizatã de demaraj permite un mod de a accede la sistemul\n"
-"vostru Linux fãrã a depinde de gestionarul de demaraj normal. Acesta este \n"
-"util dacã nu doriþi sã instalaþi LILO (sau grub) în sistem sau dacâ alte \n"
-"sisteme ºterg LILO sau dacã LILO nu funcþioneazã în sistemul dumneavoastrã.\n"
-"O dischetã personalizatã poate fi de asemena folositã ca o imagine de\n"
-"depanaj, ceea ce permite recuperãri mult mai uºoare în urmã unor pane "
-"severe.\n"
-"Doriþi sã creaþi o dischetã de demaraj pentru sistemul dumneavoastrã ?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primul periferic de dichetã"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Al doilea periferic de dischetã"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Sari peste"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"O dischetã personalizatã de demaraj permite un mod de a accede la sistemul\n"
-"vostru Linux fãrã a depinde de gestionarul de demaraj normal. Acesta este \n"
-"util dacã nu doriþi sã instalaþi LILO (sau grub) în sistem sau dacâ alte \n"
-"sisteme ºterg LILO sau dacã LILO nu funcþioneazã în sistemul dumneavoastrã.\n"
-"O dischetã personalizatã poate fi de asemena folositã ca o imagine de\n"
-"depanaj, ceea ce permite recuperãri mult mai uºoare în urmã unor pane "
-"severe.\n"
-"Doriþi sã creaþi o dischetã de demaraj pentru sistemul dumneavoastrã ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Îmi pare rãu dar nu gãsesc nici un periferic de dischetã disponibil."
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Alegeþi perifericul pe care-l doriþi pentru a realiza un disc de demaraj."
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Introduceþi o dischetã în perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Crearea dischetei de demaraj"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pegãtirea gestionalului de demaraj"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Vreþi sã folosiþi SILO?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eroare la instalrea lui aboot,\n"
-"sã încerc sã forþaþi instalarea chiar dacã aceasta distruge prima partiþie ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalaþi un gestionar de demaraj"
-
-#: ../../install_steps_interactive.pm_.c:1259
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalarea lui LILO a eºuat. Urmãtoarea eroare a apãrut:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Introduceþi uo dischetã goalã în perifericul %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creati discheta de autoinstalare"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Cîteva etape nu au fost completate.\n"
-"\n"
-"Chiar vreþi sã terminaþi acum?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitãri, instalarea e completã.\n"
-"Scoateþi media de demaraj ºi apãsaþi Enter pentru redemaraj.\n"
-"\n"
-"\n"
-"Pentru informaþii asupra corecþii disponibile pentru aceasta versiune\n"
-"Mandrake Linux, consultaþi Erata disponibilã la \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informaþiile asupra configurãrii sistemului sunt disponibile în \n"
-"capitolul referitor la post instalare din \n"
-"Oficial Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Creati discheta de autoinstalare"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizat"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "Reîncarcã"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Selectare individualã a pachetelor"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalare Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> între elemente | <Space> selecteazã | <F12> urmãtorul ecran"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Alegeþi acþiunea"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Puþinticã rãbdare"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandaþi Arborele"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Închideþi Arborele"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Basculaþi între plat ºi triere în funcþie de grup"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Alegere greºitã, încercaþi din nou\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ce alegeþi? (din oficiu %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ce alegeþi? (din oficiu %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Partiþie"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Vreþi sã folosiþi SILO?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ce alegeþi? (din oficiu %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceh (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "German"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaniol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandez"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francez"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvegian"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polonez"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rus"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Suedez"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Tastatura UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Tastatura US"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenian (vechi)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenian (maºinã de scris)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenian (fonetic)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgian"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenian (fonetic)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgar"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilian (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorus"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Elveþian (dispoziþie germanâ)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Elveþian (dispoziþie francezâ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceh (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "German (fãra taste moarte)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danez"
-
-#: ../../keyboard.pm_.c:210
-#, fuzzy
-msgid "Dvorak (US)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:211
-#, fuzzy
-msgid "Dvorak (Norwegian)"
-msgstr "Norvegian"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonian"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgian (dispoziþie \"Rusã\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgian (dispoziþie \"Latinã\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grec"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungar"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croat"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelian"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelian (fonetic)"
-
-#: ../../keyboard.pm_.c:224
-#, fuzzy
-msgid "Iranian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandez"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italian"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Tastatura UK"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latin American"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanian AZERTY (vechi)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanian AZERTY (nou)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanian QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuanian \"fonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Informaþie"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Olandez"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polonez (dispoziþie qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polonez (dispoziþie qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portughez"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadian (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "us (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "us (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "us (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloven"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovac (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovac (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Iugoslav (dispoziþie latinâ)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabel"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tastaturã Thai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tastaturã Thai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradiþional model \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (model \"Q\" modern)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Tastaturã US (internaþional)"
-
-#: ../../keyboard.pm_.c:269
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Lituanian QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslav (dispoziþie latinâ)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montaje circulare %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Mouse - Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse PS/2 generic"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Mouse generic cu 2 butoane"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:46
-#, fuzzy
-msgid "Wheel"
-msgstr "nivel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Mouse generic cu 3 butoane"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serie, tip vechi C7)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "Fãrã mouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nici unul"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Fãrã mouse"
-
-#: ../../mouse.pm_.c:499
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "Finlandez"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "E corect ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Nume de conexiune"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Alegeþi noua mãrime"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Pe ce port serie este conectat mouse-ul?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "n'am gãsit nici o carte de reþea"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configuraþie reþea"
-
-#: ../../network/ethernet.pm_.c:203
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Vã rog intraþi numele calculatorului.\n"
-"Numele calculatorului ar trebui sã fie un nume întreg-calificat,\n"
-"ca de exemplu ``calculatorulmeu.laboratorulmeu.întreprindereamea.com''.\n"
-"Puteþi de asemenea intra adresa IP a pasarelei dacã aveþi una"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-#, fuzzy
-msgid "Host name"
-msgstr "Numele calculatorului:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Configuraþia reþelei"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Expert"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "La ce port serial este conectat mouse-ul?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Citirea configuraþiei"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Citirea configuraþiei"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Configuraþie"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Test de configuraþie"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../network/isdn.pm_.c:199
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Ce tip de imprimanta aveþi?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-#, fuzzy
-msgid "ISA / PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-#, fuzzy
-msgid "PCI"
-msgstr "PCMCIA"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-#, fuzzy
-msgid "Continue"
-msgstr "Continuaþi totuºi?"
-
-#: ../../network/isdn.pm_.c:216
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Care e zona dumneavoastrã orarã?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Pe ce port serial este conectat modemul dumneavoastrã?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opþuni de telefonie"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nume de conexiune"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-#, fuzzy
-msgid "Phone number"
-msgstr "Numãr de telefon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Bazat-pe-un-script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Bazat-pe-un-terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-#, fuzzy
-msgid "Domain name"
-msgstr "Nume de conexiune"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Primul server DNS"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Al doilea server DNS"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Configuraþie reþea"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nume de conexiune"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Nume de conexiune"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configuraþie reþea"
-
-#: ../../network/netconnect.pm_.c:50
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Configuraþie reþea"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Configuraþie reþea"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuraþia reþelei"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Alegeþi noua mãrime"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detecþia perifericelor..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Configuraþie reþea"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Duplicaþi pounctul de montaj %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Alegeþi unealta pe care doriþi sã o folosiþi"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "Doriti sã folosiþi aboot?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "Configuraþia reþelei"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Vã rog intraþi configuraþia IP pentru acest calculator.\n"
-"Fiecare rubrica va trebui sa fie completatã ca o adresã IP în format\n"
-"zecimal-punctat (de exemplu 192.168.1.55)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configuraþia cãrþii de reþea %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Server XFree86 : %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-#, fuzzy
-msgid "IP address"
-msgstr "Adresã IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-#, fuzzy
-msgid "Netmask"
-msgstr "Mascã de reþea:"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automat"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Adresa IP ar trebui sã fie în formatul 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Vã rog intraþi numele calculatorului.\n"
-"Numele calculatorului ar trebui sã fie un nume întreg-calificat,\n"
-"ca de exemplu ``calculatorulmeu.laboratorulmeu.întreprindereamea.com''.\n"
-"Puteþi de asemenea intra adresa IP a pasarelei dacã aveþi una"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Server DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Periferic pasarelã"
-
-#: ../../network/network.pm_.c:381
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy-ul ar trebui sã fie http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ul ar trebui sã fie ftp://..."
-
-#: ../../network/tools.pm_.c:39
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Configuraþie proxy"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Configuraþie reþea"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nume de conexiune"
-
-#: ../../network/tools.pm_.c:76
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Configuraþie proxy"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-#, fuzzy
-msgid "Provider phone number"
-msgstr "Numãr de telefon"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Opþiuni imprimantã"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Opþiuni imprimantã"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Alegeþi tastatura"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Nume de domeniu"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Nume de conexiune"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Nume de conexiune"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Punct de montaj"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-#, fuzzy
-msgid "Account Password"
-msgstr "Parola"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montare eºuatã: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partiþiile extended nu sunt suportatet pe aceastã platformã "
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Aveþi o gaurã în tabloul de partiþii dar nu pot sã o folosesc.\n"
-"Singura soluþie e sã deplasaþi partiþia principalã pentru a avea gaura "
-"lîngãpartiþia extinsã"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurarea din fiºierul %s a eºuat: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Backup defectuos"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Eroare la scrierea în fiºierul %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "trebuie avut"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "foarte simpatic"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "simpatic: "
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "poate"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Imprimantã localã"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Remote printer"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Coadã distantã:"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "lpd distant:"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Server de imprimantã"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Periferic imprimantã:"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Imprimantã localã"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Eroare la scrierea în fiºierul %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Cum e conectatã imprimanta ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuraþie"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Coadã distantã:"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Adresa IP ar trebui sã fie în formatul 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-#, fuzzy
-msgid "Port"
-msgstr "Slab"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detecþia perifericelor..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test porturi"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Imprimantã localã"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Imprimantã localã"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Duplicaþi pounctul de montaj %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Periferic imprimantã:"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Imprimantã localã"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Pe ce port serial este conectat modemul dumneavoastrã?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Periferic imprimantã:"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuraþie proxy"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalarea pachetului  %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalarea pachetului  %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"pentru a folosi a coadã de impresie lpd distantã, aveþi nevoie sã furnizaþi\n"
-"numele calculatorului serverului de imprimantã ãi lista de aºteptare"
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Numele calculator distant"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Numele calculator distant"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Numele calculator distant"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opþiuni pentru imprimanta SMB/Windows 95/NT"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Pentru a imprima  pe o imprimantã SMB, aveþi nevoie sã furnizaþi\n"
-"numele calculatorului SMB (acesta nu este întotdeauna numele maºinii\n"
-"TCP/IP) si probabil adresa IP a serverului de imprimantã, cît ºi \n"
-"numele de access ºi numele de utilizator, parola ºi informaþia grupului de "
-"lucru."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Numele serverului SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Numele de access"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Numele de grup"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Pentru a imprima pe o imprimantã NetWare, trebuie sã furnizaþi\n"
-"numele serverului NetWare (nu e întotdeauna acelaºi cu cel TCP/IP)\n"
-"cît ºi numele listei de aºteptare ºi eventual utilizatorii care vor avea\n"
-"access ºi parolele."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server de imprimantã"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Lista de aºteptare a imprimantei"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Opþiuni imprimantã"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Opþiuni imprimantã"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Periferic imprimantã:"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-#, fuzzy
-msgid "Name of printer"
-msgstr "Imprimantã localã"
-
-#: ../../printerdrake.pm_.c:1006
-#, fuzzy
-msgid "Description"
-msgstr "Specificaþi opþiunile"
-
-#: ../../printerdrake.pm_.c:1007
-#, fuzzy
-msgid "Location"
-msgstr "Informaþie"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "E corect ?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Ce tip de imprimanta aveþi?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuraþie modem"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuraþie proxy"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Doriþi sã testaþi imprimarea ?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Test porturi"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Da, imprimã amîndouã paginile de test"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Imprimantã"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Programator"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Pagin(a/ile) de test a/au fost trimisã la procesul de impresie.\n"
-"Aceasta va dura puþin timp înaintea pornirii imprimãrii\n"
-"Starea Imprimãrii:\n"
-"%s\n"
-"\n"
-"Funcþioneazã cum trebuie?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Pagin(a/ile) de test a/au fost trimisã la procesul de impresie.\n"
-"Aceasta va dura puþin timp înaintea pornirii imprimãrii\n"
-"Funcþioneazã cum trebuie?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Imprimantã localã"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Mouse USB"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Oprire reþea"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Oprire reþea"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opþiuni imprimantã"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuraþie proxy"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Imprimantã localã"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configuraþia imprimantei"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Configuraþie reþea"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configuraþie reþea"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor nu a fost încã configurat"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configuraþie reþea"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Ridicat"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoiac"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ce tip de partiþie doriþi?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configuraþia imprimantei"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalarea pachetului  %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opþiuni imprimantã"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configuraþia imprimantei"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Doriþi sã configuraþi o imprimantã?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Imprimantã"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Iatã urmãtoarele cozi de imprimare\n"
-"Puteþi sã adãugaþi altele sau sã modificaþi cele existente."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Iatã urmãtoarele cozi de imprimare\n"
-"Puteþi sã adãugaþi altele sau sã modificaþi cele existente."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configuraþie reþea"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuraþie modem"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimarea pagin(ei/lor) de test"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Imprimantã localã"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Slab"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy-ul ar trebui sã fie http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy-ul ar trebui sã fie ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Belgian"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parola"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Nici o parolã"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Parolele nu corespund"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nu pot adãuga partiþia la md%d _formatat_RAID"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nu pot scrie fiºierul %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid a eºuat"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid a eºuat (poate vã lipsesc raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nu aveþi destule partiþii pentru nivelul RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron un orar de comandã periodicã"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd e folosit pentru a monitoriza bateria ºi login-ul via syslog.\n"
-"Poate de asemenea fi folosit pentru oprirea calculatorului dacã bateria e\n"
-"slabã."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Demareazã comenzi programate de comanda at la timpul specificat la\n"
-"demararea lui at ºi lanseazã comenzi batch atunci cînd media de încãrcare\n"
-"e suficient de scãzutã."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron e un program UNIX standard care demareazã programe-utilizator\n"
-"specificate la intervale periodice. vixie cron adaugã o serie "
-"defuncþionalitãþi la bazicul cron UNIX, printre care o mai bunã securitate "
-"ºi\n"
-"opþiuni de configuraþie mai avansate."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM adaugã suport mouse la aplicaþii text Linux ca Midnight Commander.\n"
-"El permite de asemenea operaþii cu mouse-ul de copiere/lipire ºi include\n"
-"suportul meniurilor contextuale în consolã."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache e un server World Wide Web. E folosit pentru a servi fiºiere HTML\n"
-"ºi CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Super-procesul Internet (numit în mod normal inetd) demareazã o sumedenie\n"
-"de servicii, incluzînd telnet, ftp, rsh ºi rlogin. Dezactivarea lui telnet\n"
-"dezactiveazã toate serviciile de care e responsabil."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Acest pachet încarcã harta de tastaturã selectatã ca în\n"
-"/etc/sysconfig/keyboard. Aceasta poate fi selectatã folosind kbdconfig.\n"
-"Ar trebuie sã-l lãsaþi activat pentru majoritatea calculatoarelor."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd este procesul de imprimare necesar pentru ca lpr sã funcþioneze corect.\n"
-"E un server care arbitreazã activitatea imprimantei(lor)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) e un Server de Nume de Domeniu (DNS) care e folosit la\n"
-"rezolvarea adreselor IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monteazã ºi demonteazã toate punctele de montaj a Fiºierelor sistem de "
-"Reþea\n"
-"(NFS), SMB (LanManager/Windows ºi NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activeazã/Dezactiveazã toate interfeþele de reþea configurate pentru fi\n"
-"iniþializate la demaraj."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS e un protocol popular pentru a împãrþi fiºiere de-a lungul reþelelor\n"
-"TCP/IP. Acest serviciu furnizeazã funcþionalitatea server-ului NFS, care e\n"
-"configuratã via fiºierului /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS e un protocol popular pentru a împãrþi fiºiere de-a lungul reþelelor\n"
-"TCP/IP. Acest serviciu furnizeazã funcþionalitatea blocãrii fiºierelor NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Suportul PCMCIA e destinat pentru a suporta cartele ethernet ºi modem-uri\n"
-"laptop-uri. Nu va demara decît dacã e configurat deci nu e nici o problemã\n"
-"dacã e instalat pe calculatoare care nu au nevoie de acesta."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper-ul gestioneazã conexiunile RPC, care sunt folosite de "
-"protocoluri\n"
-"ca NFS ºi NIS. Server-ul portmap trebuie demarat pe calculatoare care \n"
-"funcþioneazã ca servere pentru protocoluri care folosesc mecanismul RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix est un Agent de Transport de Mail (MTA), care e programul care\n"
-"permite deplasarea mail-ului de la un calculator la altul."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salveazã ºi restaureazã entropia sistemului pentru o mai mare calitate\n"
-"a generãrii de numere aleatoare."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Serviciul de rutaj permite actualizarea automatã a tabloului IP de rutaj\n"
-"via\n"
-" protocolului RIP. În timp de RIP este folosit pentru reþele mici,\n"
-"alte protocoluri mai complexe sunt folosite pentru reþele mai complexe."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protocolul rstat permite utilizatorilor unei reþele sã recupereze\n"
-"performanþele metrice de la orice calculator de pe reþea."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"'Protocolul rusers permite utilizatorilor unei reþele sã identifice\n"
-"cine e conectat la calculatoarele care au rãspuns."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protocolul rwho permite utilizatorului sã recupereze lista tuturor\n"
-"utilizatorului conectaþi la un calculator care foloseºte procesul rwho\n"
-"(similar cu finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog e facilitatea pe care multe procese o folosesc pentru a scrie\n"
-"mesaje de log în numeroaselor fiºiere de log ale sistemului. E o idee\n"
-"bunã sã demaraþi întotdeauna syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Demareazã ºi opreºte Server-ul de caractere X la demararea ºi\n"
-"oprirea calculatorului."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Alegeþi ce servici doriþi sã fie lansate automat la demaraj"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Imprimantã"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "Interesant"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Server de imprimantã"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "periferic: "
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Avertisment"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Append"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Root"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Meniu de Start"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Test de configuraþie"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Interesant"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Programator"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Nume de conexiune"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interesant"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Numele serverului SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-#, fuzzy
-msgid "Games"
-msgstr "Gnome"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "indispensabil"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalarea pachetului  %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nu pot citi tabloul de partiþii, e prea deteriorat dupã mine :(\n"
-"Voi încerca sã continui ºtergînd partiþiile greºite"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Eroare"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuraþie post-install"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuraþie post-install"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Felicitãri!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalare"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Adãugaþi un utilizator"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatarea fiºierului loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selectarea grupurilor de pachete"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Vã rog alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "ªterge coada"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Numele utilizatorului"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Încercaþi din nou"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Încercaþi din nou"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Nici o parolã"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Alegeþi tastatura."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Vã rog faceþi clic pe o partiþie"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Vã rog alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Configuraþie reþea"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Numele utilizatorului"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Vã rog alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Vã rog, alegeþi o limbã."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Sa folosesc optimizãrile penrtu disc dur?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Sa folosesc optimizãrile penrtu disc dur?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Aºteptare"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "nivel"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "nivel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opþiuni pentru module:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuraþia reþelei"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Vã rog alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Vã rog alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Instalarea fiºierelor sistem"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Informaþie"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Pe ce port serial este conectat modemul dumneavoastrã?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Configuraþia reþelei"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaureazã din dischetã"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Alt tip"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalarea sistemului"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaureazã din fiºierul"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaureazã din fiºierul"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizat"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "Ajutor"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Meniu de Start"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaureazã din fiºierul"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Text"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Alege pachetele de instalat"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Vã rog, alegeþi o limbã."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Vã rog, alegeþi o limbã."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Vã rog, alegeþi o limbã."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Backup defectuos"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Înregistreazã în fiºierul"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Vã rog alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuraþia reþelei"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuraþia reþelei"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuraþie"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuraþie"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Instalarea fiºierelor sistem"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalarea lui %s a eºuat. Urmãtoarea eroare a apãrut:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "n'am gãsit %s "
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Gata"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formateazã dischetã"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Pregãtesc instalarea"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "limiteazã"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatarea partiþiilor"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Dezinstalarea RPM-urilor"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuraþie"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punct de montaj"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Alegeþi partiþiile pe care doriþi sa le formataãi"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Birou"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Imprimantã"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalarea sistemului"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Selecþioneazã fiºierul"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalare"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Ieºire din instalare"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "Tabel"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "Configuraþi X"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Detecþia perifericelor..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "Tabel"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Interesant"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor nu a fost încã configurat"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuraþie post-install"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuraþie modem"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "Adresa IP a serverului SMB"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Citirea configuraþiei"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Configuraþia IDE"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Instalarea pachetului  %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuraþia reþelei"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "montare eºuatã: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Numele calculatorului:"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Tip: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasarelã:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Configuraþia serviciilor"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Configuraþie"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "Server"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Interesant"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Meniu de Start"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Configuraþie reþea"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Test de configuraþie"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Configuraþie"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Activ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Activ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Selectaþi Conexiunea de imprimantã"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nume de conexiune"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasarelã"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Alegerea nivelului de securitate"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Alegeþi unealta pe care doriþi sã o folosiþi"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadian (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandez"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Alegeþi tastatura."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Alegeþi o altã rezoluþie"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Schimbaþi Cd-Rom-ul!\n"
-"\n"
-"Vã rog introduceþi Cd-Rom etichetat \"%s\" ºi apoi apãsaþi Ok.\n"
-"Dacã nu-l aveþi, apãsaþi Anuleazã pentru a evita instalarea de pe acest Cd-"
-"Rom."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "Fiºiere:\n"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-#, fuzzy
-msgid "/File/-"
-msgstr "Fiºiere:\n"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Informaþie"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Informaþie"
-
-#: ../../standalone/logdrake_.c:110
-#, fuzzy
-msgid "/_Help"
-msgstr "Ajutor"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Numele utilizatorului"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Test porturi"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-#, fuzzy
-msgid "search"
-msgstr "Cautã"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "formatare"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Alegeþi acþiunea"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Nume de conexiune"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Pregãtesc instalarea"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuraþie"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Interesant"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatare"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuraþie proxy"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-#, fuzzy
-msgid "Save as.."
-msgstr "Meniu de Start"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "n'am gãsit nici un serie_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulare 3 Butoane?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Alegeþi o carte graficã"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Periferic de demaraj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Citirea configuraþiei"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Citirea configuraþiei"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Alegeþi limba"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Alegeþi tipul de instalare"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecþia discului dur"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configuraþie mouse"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Alegeþi tastatura"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "cîrlionþat"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Instalarea fiºierelor sistem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatarea partiþiilor"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Alege pachetele de instalat"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalarea sistemului"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Adãugaþi un utilizator"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configuraþie reþea"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configuraþia serviciilor"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalaþi un gestionar de demaraj"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Creaþi un floppy de demaraj"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configuraþi X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalarea sistemului"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Ieºire din instalare"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Eroare la citirea  %s pentru a scrie: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configuraþia reþelei"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Pregãtesc instalarea"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Birou"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Doriþi sã testaþi configuraþia ?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentaþie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Configuraþie proxy"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configuraþie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Informaþie"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Opþiunea imprimantei NetWare"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Documentaþie"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interesant"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Informaþie"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Montaj"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Nici unul"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Alegeþi noua mãrime"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Opþiuni pentru imprimanta lpd distantã"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Puteþi furniza acum opþiunile modulului %s."
-
-#~ msgid "mount failed"
-#~ msgstr "montare eºuatã"
-
-#~ msgid "Low"
-#~ msgstr "Scãzut"
-
-#~ msgid "Medium"
-#~ msgstr "Mediu"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Cîteva ameliorãri pentru acest nivel de securitate, principalul fiind cã\n"
-#~ "am introdus mai multe mesaje de avertisment ºi verificãri."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedia"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Expert"
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Puteþi selecta acum zona orarã în funcþie de locul unde trãiþi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Linux trateazã ora în format GMT sau \"Greenwich Mean Time\" ºi-l "
-#~ "traduce\n"
-#~ "în orã localã în funcþie de zona orarã aleasã."
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Vã rog alegeþi pachetele pe care doriþi sã le instalaþi"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Informaþie"
-
-#, fuzzy
-#~ msgid "authentification"
-#~ msgstr "Autentificare"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Numele utilizatorului"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Automontare automatã a perifericelor extractibile"
-
-#~ msgid "Active"
-#~ msgstr "Activ"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nu"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "O imprimantã, modelul \"%s\", a fost detactã în"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Periferic local de imprimantã"
-
-#~ msgid "Printer Device"
-#~ msgstr "Periferic imprimantã:"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Coadã distantã:"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Coadã distantã:"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mouse Systems"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Alt tip"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Alegeþi tastatura."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Vã rog faceþi clic pe o partiþie"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tip: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Backup defectuos"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Configuraþi X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Periferic imprimantã:"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Anuleazã"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Mouse USB"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "Root"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Alegeþi mãrimea pe care vreþi sã o instalaþi"
-
-#~ msgid "Total size: "
-#~ msgstr "Mârime totalã: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Asteptaþi, vã rog"
-
-#~ msgid "Total time "
-#~ msgstr "Timp total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Sã folosesc configuraþia existentã pentru X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "La ce periferic aþi conectat imprimanta  \n"
-#~ "(notaþi cã /dev/lp0 e echivalent cu LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid "New"
-#~ msgstr "Nou"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "ªterge"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Vã rog faceþi clic pe o partiþie"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Alegerea obiºnuitã este \"/dev/hda\" pentru un disc maestru principal "
-#~ "IDE\n"
-#~ "sau \"/dev/sda\" pentru primul disc SCSI."
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambiguitate (%s), fiþi mai precis\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (din oficiu %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Ce alegeþi ? (din oficiu %s  enter `niciuna' pentru niciuna) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Doriþi sã testaþi configuraþia ?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Doriþi sã testaþi configuraþia ?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Doriþi sã testaþi configuraþia ?"
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Alegeþi noua mãrime"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Vã rog, alegeþi tipul de mouse?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Alegeþi limba pentru instalare ºi folosirea sistemului."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Alegeþi dispoziþia tastaturii din lista de mai sus"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Selectare:\n"
-#~ "\n"
-#~ "  - Personalizat: Dacã sunteþi destul de familiar cu GNU/Linux, puteþi\n"
-#~ "    atunci sã alegeþi utilizarea principalã a calculatorului. Vezi mai "
-#~ "jos\n"
-#~ "    pentru detalii.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: Aceasta presupune cã sunteþi foarte familiar cu  GNU/Linux "
-#~ "ºi\n"
-#~ "    doriþi sã faceþi o instalare foarte personalizatã. Ca ºi pentru "
-#~ "clasa\n"
-#~ "    \"Personalizat\", veþi putea sã selectaþi utilizarea sistemului\n"
-#~ "    dumneavoastrã.\n"
-#~ "    Dar vã rog, NU ALEGEÞi ACEASTA DECÎT DACÃ ªTIÞI CE FACEÞI!."
-
-#, fuzzy
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t  will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Diferitele posibilitãþi pentru utilizarea calculatorului (furnizate, "
-#~ "deci, dacã\n"
-#~ "aþi ales \"Personalizat\" sau \"Expert\" la clasa de instalare) sunt \n"
-#~ "urmãtoarele:\n"
-#~ "\n"
-#~ "  - Normal: alegeþi aceasta dacã doriþi sã folosiþi calculatorul pentru\n"
-#~ "    utilizare zilnicã (munca de servici, manipulaþii grafice, etc). Nu "
-#~ "vã\n"
-#~ "    aºteptaþi la nici un compilator, utilitare de programare ºi altele\n"
-#~ "\n"
-#~ "  - Programare: cum numele-l indicã. Alegeþi acesta dacã doriþi sã aveþi\n"
-#~ "    un calculator în principal pentru programare. Veþi avea atunci o "
-#~ "colecþiecompletã\n"
-#~ "    instalatã pentru a compila, deboga ºi formata cod sursã sau crea \n"
-#~ "    pachete software.\n"
-#~ "\n"
-#~ "  - Server: alegeþi aceasta pentru a instala Mandrake Linux ºi "
-#~ "intenþionaþi    sã-l folosiþi ca server. Acesta poate fi server de "
-#~ "fiºiere (NFS sau SMB),\n"
-#~ "    sau server de imprimantã (Unix' lp (Line Printer) protocol sau "
-#~ "imprimare \n"
-#~ "stil Windows SMB, server de autentificare (NIS), server de baze de date, "
-#~ "etc.\n"
-#~ "Deci nu vã aºteptaþi la programe de genul KDE, GNOME...\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Puteþi acum sã selectaþi grupul pachetelor pe care vreþi sã le instalaþi\n"
-#~ "sau actualizaþi.\n"
-#~ "DrakX va verifica dacã aveþi destul spaþiu pentru a le instala pe toate."
-#~ "Dacã nu, vã va avertiza despre asta. Dacã doriþi sã continuaþi oricum,\n"
-#~ "va continua instalarea a tuturor grupurilor selectate dar va lãsa\n"
-#~ "deoparte cîteva pachete de mai puþin interes. La baza listei puteþi sã\n"
-#~ "selectaþi opþiunea \"Selectarea individualã a pachetelor\"; în acest caz\n"
-#~ "va trebui va trebui sã parcurgeþi mai mult de 1000 de pachete..."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Dacã aveþi toate CD-urile din lista de mai sus faceþi clic pe Ok.\n"
-#~ "Dacã nu aveþi nici unul din aceste Cd-uri, faceþi clic pe Anuleazã.\n"
-#~ "Dacã numai cîteva din aceste Cd-uri lipsesc, de-selectaþi-le ºi apoi Ok."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Puteþi intra opþiunile de telefonie. Dacã nu sunteþi sigur de ceea ce\n"
-#~ "trebuie sã intraþi, întrebaþi ISP-ul dumneavoastrã."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Intrare;\n"
-#~ "\n"
-#~ " - Adresã IP: dacã nu ºtiþi care e, întrebaþi administratorul de reþea "
-#~ "sauFurnizorul de Acces Internet (ISP).\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mascã de reþea: \"255.255.255.0\" e în general cea corectã. Dacã nu\n"
-#~ "sunteþi sigur, întrebaþi administratorul de reþea sau ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Dacã reþeaua dumneavoastrã foloseºte NIS, selectaþi \"Foloseºte NIS\". "
-#~ "Dacã\n"
-#~ "nu ºtiþi exact, întrebaþi administratorul de reþea."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Puteþi intra opþiunile de telefonie. Dacã nu sunteþi sigur de ceea ce\n"
-#~ "trebuie sã intraþi, întrebaþi ISP-ul dumneavoastrã."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Dacã folosiþi servere proxy, configuraþi-le acum. Dacã nu ºtiþi dacã ar\n"
-#~ "trebuie sã folosiþi un proxy, întrebaþi administratorul de reþea sau ISP-"
-#~ "ul."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Puteþi instala pachetul criptografie dacã conexiunea Internet a fost\n"
-#~ "realizatã corect. Alegeþi mai întîi un sit Internet oglindã pentru a\n"
-#~ "recupera pachetele ºi selectaþi pachetele de instalat.\n"
-#~ "\n"
-#~ "Notaþi cã va trebui sã alegeþi aceste pachete criptografice "
-#~ "corespunzãtoare\n"
-#~ "legislaþie dumneavoastrã."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Alegeþi parola pentru utilizatorul administrator al sistemului Linux.\n"
-#~ "Parola trebuie înscrisã de douã ori pentru a se asigura cã sunt "
-#~ "identice.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root e utilizatorul administrator al sistemului ºi singurul autorizat\n"
-#~ "pentru a modifica configuraþia sistemului. Deci alegeþi cu atenþie "
-#~ "aceastã\n"
-#~ "parolã! Utilizarea neautorizatã a acestui cont poate fi foarte\n"
-#~ "periculoasã pentru integritatea sistemului, pentru informaþiilor "
-#~ "conþinute\n"
-#~ "ºi pentru celelalte calculatoare conectate la el. Aceastã parolã trebuie "
-#~ "sã\n"
-#~ "fie un amestec de caractere alfanumerice ºi de cel puþin 8 caractere. Nu-"
-#~ "l\n"
-#~ "scrieþi NICIODATÃ pe ceva ºi nu-l faceþi prea lung sau prea greu de "
-#~ "reþinut."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Puteþi crea acum unul sau mai multe conturi de utilizator \"obiºnuite\",\n"
-#~ "în opoziþie cu contul \"privilegiat\" al utilizatorului root. Puteþi\n"
-#~ "crea unul sau mai multe conturi pentru fiecare persoanã autorizatã sã\n"
-#~ "se conecteze la calculator. Notaþi cã fiecare cont utilizator va avea\n"
-#~ "propriile preferinþe (configuraþie graficã, parametrii de programe, "
-#~ "etc.)\n"
-#~ "ºi propriul dosar personal în \"/home\" unde toate aceste preferinþe vor "
-#~ "fi\n"
-#~ "stocate.\n"
-#~ "\n"
-#~ "\n"
-#~ "Mai întîi creaþi un cont pentru dumneavoastrã! Chiar dacã veþi fi "
-#~ "singurul\n"
-#~ "utilizator al calculatorului, NU TREBUIE SÃ VÃ CONECTAÞI CA ROOT PENTRU\n"
-#~ "SCOPURI ZILNICE LA SISTEM: pentru motive securitate. În plus, un sistem\n"
-#~ "poate uºor deveni inutilizabil prin apãsarea unei taste greºite.\n"
-#~ "\n"
-#~ "\n"
-#~ "În consecinþã, ar trebuie sã vã conectaþi la sistem folosind contul \n"
-#~ "utilizatorului pe care l-aþi creat aici ºi sã folosiþi contul root\n"
-#~ "numai pentru administraþie ºi scopuri de depanare."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Principalele opþiuni ale lui LILO ºi grub sunt:\n"
-#~ " - Periferic de boot: parametreazã numele perifericului (e.g. o partiþie\n"
-#~ "a unui disc dur) care conþine sectorul de demaraj. În mod normal e vorba\n"
-#~ "de \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Timp de aºteptare înainte de a demara imaginea din oficiu: Specificã\n"
-#~ "numãrul de zecimi de secundã pentru a aºtepta înaintea demarãrii primei\n"
-#~ "imagini. Acesta e foarte practic pentru sistemele care demareazã de pe\n"
-#~ "disc dur  dupã activarea tastaturii. Gestionarul de demaraj nu aºteaptã\n"
-#~ "deloc dacã secþiunea \"delay\" e omisã sau dacã e fixatã la zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mod Video: Aceasta specificã modul text VGA care ar trebui selectat "
-#~ "la\n"
-#~ "demaraj. Urmãtoarele opþiuni sunt valabile:\n"
-#~ "    * normal: selectaþi normal pentru un mod text de 80x25.\n"
-#~ "    * <numãr>:  folosiþi modul text corespunzãtor."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "LILO (de la LInux LOader) ºi Grub sunt gestionare de demaraj. Amîndoi "
-#~ "sunt\n"
-#~ "capabili sã demareze Linux sau un alt sistem prezent în calculator.\n"
-#~ "În mod normal, aceste alte sisteme de operare sunt detectate ºi "
-#~ "instalate\n"
-#~ "corect. Dacã cumva nu e cazul, puteþi adãuga o intrare manual în acest\n"
-#~ "ecran. Aveþi grijã sã alegeþi parametrii cei buni.\n"
-#~ "\n"
-#~ "\n"
-#~ "Puteþi de asemenea sã interziceþi accesul acestor alte sisteme a altor \n"
-#~ "utilizatori, caz în care ar trebui sã ºtergeþi intrãrile acestor "
-#~ "sisteme.\n"
-#~ "În acest ultim caz însã, veþi avea nevoie de un floppy de demaraj pentru\n"
-#~ "a putea le demara!"
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Principalele opþiuni ale lui LILO ºi grub sunt:\n"
-#~ " - Periferic de boot: parametreazã numele perifericului (e.g. o partiþie\n"
-#~ "a unui disc dur) care conþine sectorul de demaraj. În mod normal e vorba\n"
-#~ "de \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Timp de aºteptare înainte de a demara imaginea din oficiu: Specificã\n"
-#~ "numãrul de zecimi de secundã pentru a aºtepta înaintea demarãrii primei\n"
-#~ "imagini. Acesta e foarte practic pentru sistemele care demareazã de pe\n"
-#~ "disc dur  dupã activarea tastaturii. Gestionarul de demaraj nu aºteaptã\n"
-#~ "deloc dacã secþiunea \"delay\" e omisã sau dacã e fixatã la zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mod Video: Aceasta specificã modul text VGA care ar trebui selectat "
-#~ "la\n"
-#~ "demaraj. Urmãtoarele opþiuni sunt valabile:\n"
-#~ "    * normal: selectaþi normal pentru un mod text de 80x25.\n"
-#~ "    * <numãr>:  folosiþi modul text corespunzãtor."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Acum e momentul sã configuraþi Sistemul X Windows, care e inima "
-#~ "interfaþei\n"
-#~ "grafice din Linux (Linux GUI de la Linux Graphical User Interface). În\n"
-#~ "acest scop trebuie sã configuraþi cartea video ºi monitorul. Majoritatea\n"
-#~ "acestor etape sunt automatizate; deci s-ar putea ca tot ceea ce veþi "
-#~ "avea\n"
-#~ "de fãcut va consista în verificarea ºi acceptarea parametrilor :)\n"
-#~ "\n"
-#~ "Cînd aþi terminat cu configuraþia, X va fi re-demarat (dar poate îi veþi\n"
-#~ "cere lui DrakX sã nu o facã) pentru a verifica dacã noii parametrii vã\n"
-#~ "convin. Dacã nu vã convin, va puteþi întoarce ºi sã-i schimbaþi de cîte "
-#~ "ori\n"
-#~ "e necesar."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Dacã ceva nu e în regulã cu configuraþia X, folosiþi aceste opþiuni "
-#~ "pentru\n"
-#~ "a configura în mod corect Sistemul X Windows."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Dacã preferaþi sã folosiþi un login în mod grafic, selectaþi \"Da\" ºi \n"
-#~ "\"Nu\" în celãlalt caz."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Sistemul dumneavoastrã e pe cale sã re-demareze.\n"
-#~ "\n"
-#~ "Dupã re-demaraj, noul sistem Mandrake Linux sa va lansa automat. Dacã "
-#~ "doriþi\n"
-#~ "sã demaraþi un alt sistem de operare existent, vã rog citiþi "
-#~ "instrucþiunile\n"
-#~ "adiþionale."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Scrie /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formateazã tot"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Dupã formatarea tuturor partiþiilor,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "toate datele din aceste partiþii vor fi pierdute"
-
-#~ msgid "Reload"
-#~ msgstr "Reîncarcã"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Doriþi sã creaþi un floppy pentru o instalare automatã de replicare?"
-
-#~ msgid "Remote queue"
-#~ msgstr "Coadã distantã:"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Standard"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#, fuzzy
-#~ msgid "Adapter"
-#~ msgstr "Actualizare"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Mouse USB"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Da, imprimã o paginã de test ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Da, imprimã o pagina de test Postscript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Mãrimea hîrtiei"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Ejectarea paginei dupã lucru?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opþiuni pilot Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opþiuni pentru culori:"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Imprimã text ca Postscript"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Reparã efectul de scarã al textului"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Numãr de pagini"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marginile Dreapta/Stînga în puncte (1/72 inci)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marginile Sus/Jos în puncte (1/72 inci)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opþiuni Gostscript suplimentare"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opþinuni Text suplimentare"
-
-#~ msgid "Reverse page order"
-#~ msgstr "incerseazã ordinea paginilor"
-
-#, fuzzy
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Selectaþi Conexiunea de imprimantã"
-
-#, fuzzy
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Fiecare coadã (la care activitãþile de imprimare sunt trimise) are "
-#~ "nevoie\n"
-#~ "de un nume (adesea lp) ºi de un directoriu de spool asociat. Ce nume\n"
-#~ "ºi directoriu doriþi sã utilizaþi pentru aceastã coadã ºi cum e "
-#~ "conectatãimprimanta?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Fiecare coadã (la care activitãþile de imprimare sunt trimise) are "
-#~ "nevoie\n"
-#~ "de un nume (adesea lp) ºi de un directoriu de spool asociat. Ce nume\n"
-#~ "ºi directoriu doriþi sã utilizaþi pentru aceastã coadã ºi cum e "
-#~ "conectatãimprimanta?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Numele cozii:"
-
-#~ msgid "Spool directory"
-#~ msgstr "Dosar de Spool:"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Tabel"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Tabel"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "montare eºuatã: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Pentru a crea un sistem încã ºi mai sigur, ar trebui sã alegeþi "
-#~ "\"Foloseºte\n"
-#~ "un fiºier shadow\" ºi \"Foloseºte parole MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Dacã reþeaua dumneavoastrã foloseºte NIS, selectaþi \"Foloseºte NIS\". "
-#~ "Dacã\n"
-#~ "nu ºtiþi exact, întrebaþi administratorul de reþea."
-
-#~ msgid "yellow pages"
-#~ msgstr "Pagini galbene"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Configuraþie"
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Pe ce disc doriþi sã schimbaþi ?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Selecþioneazã fiºierul"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Configuraþia IDE"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configuraþie: Adaugã localizare"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Acest script de demaraj încearcã sã încarce modulele pentru mouse-ul\n"
-#~ "dumneavoastrã usb."
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuraþie post-install"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependenþe automate"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configuraþie LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Creaþi o dischetã de demaraj"
-
-#~ msgid "Choice"
-#~ msgstr "Alegere "
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Monitor"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Puteþi alege acum diferite opþiuni pentru sistemul dumneavoastrã.\n"
-#~ "\n"
-#~ "  - Foloseºte optimizãri pentru disc dur: aceastã opþiune poate ameliora\n"
-#~ "performanþele discului dur dar e rezervat numai utilizatorilor avansaþi:\n"
-#~ "problemele cu unele microprocesoare port distruge datele, deci sunteþi\n"
-#~ "avertizat. Kernel-ul conþine o listã neagrã a discurilor ºi a "
-#~ "microproce-\n"
-#~ "soarelor, dar dacã vreþi sã eliminaþi orice surprizã nu selectaþi "
-#~ "aceastã\n"
-#~ "opþiune.\n"
-#~ "\n"
-#~ "  - Alege nivelul de securitate: puteþi alege nivelul de securitate "
-#~ "pentru\n"
-#~ "sistemul dumneavoastrã. Vã referiþi-vã la manual pentru o informaþie "
-#~ "completã.\n"
-#~ "Pe scurt: dacã nu sunteþi sigur, alegeþi \"Mediu\", dacã doriþi un\n"
-#~ "calculator securizat, alegeþi \"Paranoiac\" dar aveþi grijã: ÎN ACEST "
-#~ "NIVEL\n"
-#~ " DE SECURITATE, LE LOGIN ÎN CALITATE DE ROOT NU E AUTORIZAT DIRECT! "
-#~ "Pentru \n"
-#~ "a deveni root, va trebui sã vã conectaþi ca utilizator normal ºi apoi sã\n"
-#~ "folosiþi comanda \"su\". În plus, nu vã aºteptaþi sã aveþi altceva decît\n"
-#~ "un server. Aþi fost avertizat.\n"
-#~ "\n"
-#~ "  - Precizeazã RAM-ul dacã e necesar: din pãcate, în lumea actualã a\n"
-#~ "calculatoarelor personale, nu existã o metodã standard pentru a consulta\n"
-#~ "BIOS-ul cu privire la RAM-ul prezent în calculator dumneavoastrã. Din\n"
-#~ "aceastã cauzã, Linux poate eºua la detectarea RAM-ului în mod corect. "
-#~ "Dacã\n"
-#~ "acesta e cazul, puteþi specifica aici cantitatea exactã. Notaþi cã o\n"
-#~ "diferenþã de 2 sau 4Mb e normalã.\n"
-#~ "\n"
-#~ "  - Auto-montaj des media extractibile: dacã preferaþi sã nu montaþi "
-#~ "manual\n"
-#~ "în mod manual aceste periferice (CD-ROM, Floppy, Zip) cu ajutorul \n"
-#~ "comenzilor \"mount\" ºi \"umount\", selectaþi aceastã opþiune.\n"
-#~ "\n"
-#~ "  - Activeazã Numlock la demaraj: dacã doriþi sã activaþi NumLock la\n"
-#~ "demaraj selectaþi aceastã opþiune (Notaþi cã Numlock poate sau sã\n"
-#~ "funcþioneze în) mod grafic, X)."
-
-#, fuzzy
-#~ msgid "Internet/Network access"
-#~ msgstr "Interesant"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Diverse"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Întrebãri diverse"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Nu pot sã folosesc supermount în nivelul de securitate ridicat"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Primul server DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Al doilea server DNS"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Nume de domeniu"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Programator"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Ce gestionar de demaraj doriþi sã folosiþi ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Floppy pentru instalare automatã"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Sã caut un modem?"
-
-#, fuzzy
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Configuraþie reþea"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Reþeaua LAN a fost deja configuratã. Doriþi sã :"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Configuraþia IDE"
-
-#, fuzzy
-#~ msgid "KDE"
-#~ msgstr "IDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#, fuzzy
-#~ msgid "Internet Tools"
-#~ msgstr "Configuraþie proxy"
-
-#, fuzzy
-#~ msgid "Development C/C++"
-#~ msgstr "Programator"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Configuraþia zonei orare"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Opþiunea imprimantei NetWare"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(poate cauza deteriorarea datelor)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Activeazã num lock la demaraj"
-
-#, fuzzy
-#~ msgid "Confirm Password"
-#~ msgstr "Parola"
-
-#~ msgid "DNS server:"
-#~ msgstr "Server DNS:"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Periferic pasarelã:"
-
-#~ msgid "default"
-#~ msgstr "standard"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Care e folosinþa sistemului dumneavoastrã?"
-
-#, fuzzy
-#~ msgid "Select the size you want to install"
-#~ msgstr "Alegeþi mãrimea pe care vreþi sã o instalaþi"
-
-#~ msgid "Customized"
-#~ msgstr "Personalizat"
-
-#, fuzzy
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Sunteþi sigur ca sunteþi un expert?\n"
-#~ "Ei, nu-i glumã, veþi putea face lucruri serioase dar periculoase aici."
-
-#~ msgid "Use shadow file"
-#~ msgstr "Foloseºte un fiºier shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Foloseºte parole MD5"
-
-#~ msgid "Package"
-#~ msgstr "Pachet"
-
-#~ msgid "Tree"
-#~ msgstr "Arbore"
-
-#~ msgid "Sort by"
-#~ msgstr "Triazã în funcþie de"
-
-#~ msgid "Category"
-#~ msgstr "Categorie"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pachete instalate"
-
-#~ msgid "Available packages"
-#~ msgstr "Pachete disponibile"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Afiºaþi numai foile"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandeazã tot"
-
-#~ msgid "Collapse all"
-#~ msgstr "Reduce tot"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Adaugã localizarea pachetelor"
-
-#~ msgid "Update location"
-#~ msgstr "Actualizare localizare"
-
-#~ msgid "Find Package"
-#~ msgstr "Cautã Pachetul"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Cautã pachetul conþinînd fiºierul"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Basculeazã între Instalare ºi Disponibil"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Verificare dependenþe"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Pachetele urmãtoare urmeazã sã fie dezinstalate"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Ce pachet cãutaþi ?"
-
-#~ msgid "No match"
-#~ msgstr "Nici unul"
-
-#~ msgid "No more match"
-#~ msgstr "Nici o altã ocurenþã"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake e actualmente într-un mod ``memorie joasã''.\n"
-#~ "Voi re-lansa rpmdrake pentru a permite cãutarea fiºierelor"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Ce fiºier cãutaþi ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Ce cãutaþi ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Daþi-mi un nume (ex: `extra', `comercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directoriu"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Nici un Cd-rom disponibil (nimic în /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL-ul directoriului care conþine RPM-urile"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Pentru FTP ºi HTTP, aveþi nevoie sã daþi localizarea pentru hdlist\n"
-#~ "Aceasta trebuie sã fie relativã la URL -ul de mai sus"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Vã rog furnizaþi urmãtoarea informaþie"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s e deja folosit"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Actualizare bazei RPM-urilor"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Voi ºterge intrarea %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Cãutare de foi"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Gãsirea foilor ia ceva timp"
-
-#, fuzzy
-#~ msgid "ECI modem"
-#~ msgstr "Expert"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (important)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (foarte simpatic)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (simpatic)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "La ce port serial este conectat mouse-ul?"
-
-#~ msgid "Czech"
-#~ msgstr "Ceh"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovac"
-
-#, fuzzy
-#~ msgid "Reconfigure local network"
-#~ msgstr "Reconfiguraþi reþeaua"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Nume de conexiune"
-
-#, fuzzy
-#~ msgid "Germany (1TR6)"
-#~ msgstr "German"
-
-#, fuzzy
-#~ msgid "What do you wish to do?"
-#~ msgstr "Ce doriþi sã faceþi ?"
-
-#, fuzzy
-#~ msgid "Install/Rescue"
-#~ msgstr "Instalare"
-
-#, fuzzy
-#~ msgid "Rescue"
-#~ msgstr "Redimensioneazã"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Ce tip de partiþie doriþi?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Alegeþi \"Instalare\" dacã nu exista alte versiuni de Linux instalate,\n"
-#~ "sau dacã doriþi sã folosiþi mai multe versiuni sau distribuþii.\n"
-#~ "\n"
-#~ "Alegeþi \"Actualizare\" dacã doriþi sã actualizaþi o versiune\n"
-#~ "precedentã Mandrake Linux:\n"
-#~ "%s or %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Selectare:\n"
-#~ "\n"
-#~ "  - Automatizat: Dacã n'aþi mai instalat Linux niciodatã, alegeþi "
-#~ "aceasta.\n"
-#~ "NOTÃ:\n"
-#~ "    reþeaua nu va fi configuratã în timpul instalãrii, folosiþi\n"
-#~ "    \"LinuxConf\" pentru a o configura dupã ce instalarea s'a terminat.\n"
-#~ "\n"
-#~ "  - Personalizat: Dacã sunteþi destul de familiar cu GNU/Linux, puteþi\n"
-#~ "    atunci sã alegeþi utilizarea principalã a calculatorului. Vezi mai "
-#~ "jos\n"
-#~ "    pentru detalii.\n"
-#~ "\n"
-#~ "  - Expert: Aceasta presupune cã sunteþi foarte familiar cu  GNU/Linux "
-#~ "ºi\n"
-#~ "    doriþi sã faceþi o instalare foarte personalizatã. Ca ºi pentru "
-#~ "clasa\n"
-#~ "    \"Personalizat\", veþi putea sã selectaþi utilizarea sistemului\n"
-#~ "    dumneavoastrã.\n"
-#~ "    Dar vã rog, NU ALEGEÞi ACEASTA DECÎT DACÃ ªTIÞI CE FACEÞI!.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "În acest punct, veþi putea alege partiþiile pentru a instala sistemul\n"
-#~ "Mandrake Linux dacã acestea au fost deja definite (dintr-o altã "
-#~ "instalare\n"
-#~ "prealabilã a unui sistem Linux sau cu ajutorul unui program "
-#~ "departiþionare). În celelalte cazuri, partiþiile vor trebui sã fie "
-#~ "create.\n"
-#~ "Aceastã operaþie consistã în divizarea logicã a capacitãþii discului dur\n"
-#~ "în arii separate pentru utilizare.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã aveþi nevoie sã creaþi noi partiþii, folosiþi \"Auto alocare\" \n"
-#~ "pentru o creare automatã de partiþii Linux. Puteþi selecta discul pentru\n"
-#~ "partiþionare fãcînd clic pe \"hda\" pentru primul disc IDE, \"hdb\" \n"
-#~ "pentru al doilea sau \"sda\" pentru primul disc SCSI ºi aºa mai departe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Douã partiþii obiºnuite sunt: partiþia root (/), punctul de plecare\n"
-#~ "al ierarhiei sistemului de fiºiere ºi /boot, care conþine toate "
-#~ "fiºierele\n"
-#~ "necesare pentru a demara sistemul de operare cînd calculatorul e aprins.\n"
-#~ "\n"
-#~ "\n"
-#~ "Pentru cã efectele acestui proces sunt în mod uzual reversibile,\n"
-#~ "partiþionarea poate fi intimidantã pentru un utilizator ne-experimentat.\n"
-#~ "De aceea DiskDrake simplificã pe cît posibil acest proces. Consultaþi\n"
-#~ "documentaþia ºi nu vã grãbiþi înainte de a începe.\n"
-#~ "\n"
-#~ "\n"
-#~ "Puteþi accede la toate opþiunile cu ajutorul tastaturii: navigaþi "
-#~ "printre\n"
-#~ "partiþii folosind tasta Tab ºi tastele sãgeþi Sus/Jos. Cînd o partiþie\n"
-#~ "e selectatã, puteþi folosi:\n"
-#~ "\n"
-#~ "- Ctrl-c  pentru a crea o nouã partiþie (cînd a partiþie goalã e "
-#~ "selectatã)\n"
-#~ "\n"
-#~ "- Ctrl-d  pentru a ºterge o partiþie\n"
-#~ "\n"
-#~ "- Ctrl-m pentru a crea un punct de montaj\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Toate partiþiile care tocmai au fost definite trebuie sã fie formatate\n"
-#~ "înainte de a fi utilizate. (formatare însemnînd crearea fiºierelor "
-#~ "sistem).\n"
-#~ "Poate doriþi sã reformataþi partiþii pre-existente pentru a ºterge \n"
-#~ "informaþiile conþinute.\n"
-#~ "Nota: nu este necesar sã formataþi partiþii mai ales dacã doriþi sã\n"
-#~ "conservaþi informaþiile ce le conþin. Partiþii de acest gen sunt:\n"
-#~ "/home ºi /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Pachetele selectate sunt acum pe cale de fi instalate. Aceastã operaþie\n"
-#~ "ar trebui sã ia cîteva minute, excepþie fãcînd Actualizare unei "
-#~ "distribuþii\n"
-#~ "precedente, caz în care timpul va fi lung înainte ca actualizarea sã\n"
-#~ "înceapã."
-
-#, fuzzy
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Dacã DrakX nu a reuºit sã detecteze mouse-ul, sau dacã doriþi sã "
-#~ "verificaþi\n"
-#~ "ceea ce a fãcut, vi se va propune lista cu mouse-uri de mai sus.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã sunteþi de acord cu propunerea lui DrakX, sãriþi la secþiunea "
-#~ "doritã\n"
-#~ "cu un simple în meniu din stînga. Dacã nu, alegeþi tipul de mouse care\n"
-#~ "credeþi cã se apropie mai mult de cel pe care-l aveþi.\n"
-#~ "\n"
-#~ "\n"
-#~ "În cazul unui mouse de tip serie, veþi putea specifica portul serie la\n"
-#~ "care e conectat."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Aceastã secþiune este dedicatã configuraþiei unei reþele locale (LAN)\n"
-#~ "sau a unui modem.\n"
-#~ "\n"
-#~ "Alegeþi \"Reþea LAN\" ºi DrakX va încerca sã detecteze adaptatorul\n"
-#~ "Ethernet pe care-l aveþi. Adaptatorii PCI sunt în general detectaþi ºi\n"
-#~ "iniþializaþi în mod automat.\n"
-#~ "În cazul unui adaptator ISA, detecþia automatã nu va funcþiona ºi veþi\n"
-#~ "avea atunci de ales pilotul din lista propusã.\n"
-#~ "\n"
-#~ "\n"
-#~ "La fel ºi pentru adaptatorii SCSI, puteþi lãsa testul mai întîi, dacã nu\n"
-#~ "puteþi specifica opþiunile pentru pilot pe care le-aþi recuperat în \n"
-#~ "documentaþia hardware-ului.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã instalaþi sistemul Mandrake Linux pe un calculator care face parte\n"
-#~ "dintr-o reþea deja existentã, administratorul de reþea vã va da toate\n"
-#~ "informaþiile necesare (adresã IP, sub-mascã de reþea sau netmask mai pe\n"
-#~ "scurt ºi numele calculatorului). Dacã configuraþi o reþea privatã la\n"
-#~ "dumneavoastrã acasã, de exemplu, va trebui sã alegeþi adresele singur.\n"
-#~ "\n"
-#~ "\n"
-#~ "Alegeþi \"Telefonaþi cu modem\" ºi atunci conexiunea Internet va fi\n"
-#~ "configuratã. DrakX va încerca sã detecteze modemul ºi dacã nu reuºeºte\n"
-#~ "vã va propune portul serie la care modemul e conectat."
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux poate gera multe tipuri de imprimante. Fiecare din aceste tipuri\n"
-#~ "necesitã o instalare diferitã. Notaþi cã \"spool\"-ul de imprimantã\n"
-#~ "foloseºte \"lp\" pentru numele din oficiu al imprimantei; deci va trebui\n"
-#~ "sã aveþi o imprimantã cu un acest nume; dar îi veþi putea da mai multe "
-#~ "nume,\n"
-#~ "separate de caractere '|'. Deci, dacã doriþi sã aveþi unele nume mai "
-#~ "pline\n"
-#~ "de sens, veþi putea folosi, de exemplu: \"Imprimanta mea|lp\".\n"
-#~ "Imprimanta care are are \"lp\" printre numele ei va fi consideratã ca\n"
-#~ "imprimanta din oficiu.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã imprimanta e conectatã fizic la calculator, selectaþi atunci\n"
-#~ "\"Imprimantã localã\". Veþi avea apoi a intra numele portului de\n"
-#~ "imprimantã la care aceasta e conectatã ºi a selecta filtrul apropriat\n"
-#~ "Portul LPT1 devine lp0 în Linux\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã doriþi sã accedeþi la un calculator Unix distant, veþi avea a "
-#~ "selecta\n"
-#~ "\"lpd distant\". Pentru a o face sã funcþioneze, nu aveþi nevoie de "
-#~ "parolã\n"
-#~ "sau de nume de utilizator, dar va trebui sã ºtiþi care e numele cozii de\n"
-#~ "imprimare de pe acest server-ului.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã doriþi sã acedeþi la o imprimantã SMB (adicã la o imprimantã "
-#~ "conectatã\n"
-#~ "fizic la un calculator distant cu un sistem Windows), va trebui sã \n"
-#~ "specificaþi numele ei SMB (care nu e numele ei TCP/IP) ºi probabil "
-#~ "adresa\n"
-#~ "ei IP, plus numele utilizatorului, al grupului de lucru ºi parola cerutã\n"
-#~ "pentru a accede la imprimantã ºi bineînþeles numele imprimantei. "
-#~ "Lucrurile\n"
-#~ "sunt similare pentru o imprimantã Netware, excepþie fãcînd faptul cã nu\n"
-#~ "aveþi nevoie de informaþia de grup de lucru."
-
-#, fuzzy
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "E foarte indicat sã rãspundeþi \"Da\" aici. Dacã instalaþi Microsoft \n"
-#~ "Windows mai tîrziu, acest a vã va ºterge sectorul de demaraj al "
-#~ "discului.\n"
-#~ "Dacã nu aveþi un floppy de demaraj, nu veþi mai putea demara Linux."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Abandonaþi schimbãrile?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Ce tip de mouse aveþi?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Rezoluþii alese în mod automat"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Pentru a afla rezoluþiile disponibile voi încerca altele diferite.\n"
-#~ "Ecranul dumneavoastrã se va stinge ºi aprinde de cîteva ori..."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Pot sã încerc sã gãsesc rezoluþiile disponibile (eg:800x600).\n"
-#~ "Uneori, totuºi, aceasta poate bloca calculatorul.\n"
-#~ "Doriþi sã încerc ?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "N'am gãsit moduri valide\n"
-#~ "Încercaþi cu o altã carte video sau alt monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Configurarea automatã a rezoluþiilor"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Mouse Apple ADB"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Mouse Apple ADB (2 Butoane)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Mouse Apple ADB (3+ Butoane)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Mouse Apple USB"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Mouse Apple USB (2 Butoane)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Mouse Apple USB (3+ Butoane)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Mouse ATI Bus"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Mouse Microsoft Bus"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Mouse Logitech Bus"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Mouse USB (3 butoane sau mai multe)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A sau mai mult (serie)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serie)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serie)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serie)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Mouse serie generic"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Mouse Microsoft compatibil (serie)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Mouse serie generic cu 3 butoane"
-
-#, fuzzy
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "montarea nfs a eºuat"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Criptografie"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Doriþi sa configuraþi reþeaua LAN pentru sistemul dumneavoastrã?"
-
-#~ msgid "Show less"
-#~ msgstr "Afiºaþi mai puþin"
-
-#~ msgid "Show more"
-#~ msgstr "Afiºaþi mai mult"
-
-#~ msgid "tie"
-#~ msgstr "cravatã"
-
-#~ msgid "brunette"
-#~ msgstr "brunetã"
-
-#~ msgid "girl"
-#~ msgstr "fatã"
-
-#~ msgid "woman-blond"
-#~ msgstr "femeie blondã"
-
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Care e dispoziþia tastaturii?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Sã încerc sã gãsesc cartelele PCMCIA?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Sã încerc sã gãsesc periferice %s?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Doriþi sa configuraþi o conexiune telefonicã prin modem?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Sã încerc sã gãsesc periferice PCI?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "În cãutarea partiþiei root"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Aceasta nu e o partiþie root, vã rog alegeþi o alta"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Vã rog alegeþi o partiþie pentru a o folosi ca partiþie root?."
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Nu aveþi destul spaþiu pentru Lnx4win"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# When possible cp437 accentuated letters can be used too.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Bun venit la gestionarul de sisteme de operare LILO!\n"
-#~ "Pentru a lista posibilitatile, apasati <TAB>.\n"
-#~ "\n"
-#~ "Pentru a lansa unul dintre ele, scrietii numele si apasati <ENTER> sau\n"
-#~ "asteptati %d secunde pentru demararea din oficiu.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Bun venit la gestionarul de sisteme de operare SILO!\n"
-#~ "\n"
-#~ "Pentru a afisa diferitele posibilitati, apasati <TAB>.\n"
-#~ "\n"
-#~ "Pentru a demara unul dintre ele, scrieti-i numele si apasati <ENTER> sau\n"
-#~ "asteptati %d secunde pentru demararea din oficiu.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Opþinunile principale ale lui SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Iatã urmãtoarele intrãri din SILO.\n"
-#~ "Puteþi adãuga mai multe sau schimba cele existente."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Aceastã etichetã e deja utilizatã"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Instalarea lui SILO a eºuat. Urmãtoarea eroare a apãrut:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX va încerca mai întîi sã caute unul sau mai mulþi adaptatori PCI\n"
-#~ "sau SCSI. Dacã cãutarea e fructuoasã ºi ºtie ce pilot sã foloseascã,\n"
-#~ "atunci îl (le) va instala în mod automat.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã adaptatorul este o carte ISA, sau est e o carte PCI ºi DrakX\n"
-#~ "nu ºtie ce pilot sã foloseascã sau dacã nu aveþi nici un adaptator SCSI\n"
-#~ "veþi fi mai apoi întrebat dacã aveþi unul sau nu. Dacã nu aveþi nici "
-#~ "unul\n"
-#~ "rãspundeþi \"Nu\". Dacã aveþi unul sau mai multe, rãspundeti \"Da\".\n"
-#~ "O listã cu piloþi va va permite atunci sã alegeþi unul.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dupã ce aþi selecþionat pilotul, DrakX vã va întreba dacã doriþi\n"
-#~ "sã specificaþi opþiuni pentru el (ei). Mai întîi încercaþi ºi lãsaþi\n"
-#~ "pilotul sã testeze hardware-ul: în mod normal aceasta funcþioneazã bine.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dacã nu, nu uitaþi informaþiile despre hardware pe care le-aþi putea "
-#~ "gãsi\n"
-#~ "în documentaþia dumneavoastrã sau din Windows (dacã l-aveþi instalat), "
-#~ "aºa\n"
-#~ "cum e sugerat în ghidul de instalare. Acestea sunt opþiuni pe care le "
-#~ "veþi\n"
-#~ "furniza pilotului."
-
-#~ msgid "Shutting down"
-#~ msgstr "Oprire"
-
-#~ msgid "useless"
-#~ msgstr "nefolositor"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "Am gãsit ceva caractere din windows.\n"
-#~ "Doriþi sã le folosiþi ? Asiguraþi-vã ca aveþi dreptul sã le folosiþi\n"
-#~ "în Linux."
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Alegeþi \"Instalare\" dacã nu exista alte versiuni de Linux instalate,\n"
-#~ "sau dacã doriþi sã folosiþi mai multe versiuni sau distribuþii.\n"
-#~ "\n"
-#~ "\n"
-#~ "Alegeþi \"Actualizare\" dacã doriþi sã actualizaþi o versiune precedentã\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 or 7.0 (Air)."
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Doriþi sã utilizaþi LILO?"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Alegeþi alt CD de instalat"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Automated: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Selecþioneazã:\n"
-#~ "\n"
-#~ "  - Automatizat: Dacã nu aþi mai instalat niciodatã Linux, sau dacã "
-#~ "doriþi\n"
-#~ "sã instalaþi distribuþia aleasã \"Produsul anului\" în anul 1999, faceþi\n"
-#~ "clic aici.\n"
-#~ "\n"
-#~ "  - Personalizat: Dacã sunteþi obiºnuit cu Linux ºi veþi fi capabil sã\n"
-#~ "alegeþi scopul sistemului instalat între normal, progamator sau server.\n"
-#~ "Alegeþi \"Normal\" pentru o utilizare generalã a calculatorului. Puteþi\n"
-#~ "alege \"Programator\" dacã veþi folosi calculatorul în principal pentru\n"
-#~ "programare sau \"Server\" dacã doriþi sã instalaþi un server general\n"
-#~ "(pentru mail, imprimare...)\n"
-#~ "\n"
-#~ "  - Expert: Dacã cunoaºteþi bine GNU/Linux ºi doriþi sã alegeþi un tip "
-#~ "de\n"
-#~ "instalare personalizabilã in cele mai mici detalii, selectaþi acest tip.\n"
-#~ "Veþi fi capabil sã selectaþi destinaþia sistemului dumneavoastrã ca ºi\n"
-#~ "pentru \"Personalizat\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Instalare SCSI"
-
-#~ msgid "developer"
-#~ msgstr "programator"
-
-#~ msgid "beginner"
-#~ msgstr "începãtor"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Dupã %s partiþie %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "schimbã tipul de"
-
-#~ msgid "resizing"
-#~ msgstr "redimensioneazã"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Cantitatea: %s MB"
-
-#~ msgid "Password:"
-#~ msgstr "Parola:"
-
-#~ msgid "User name:"
-#~ msgstr "Numele utilizatorului:"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Alegeþi Instalare sau Actualizare"
diff --git a/perl-install/share/po/ru.po b/perl-install/share/po/ru.po
deleted file mode 100644
index 1f8d41ac7..000000000
--- a/perl-install/share/po/ru.po
+++ /dev/null
@@ -1,13049 +0,0 @@
-# DrakX messages translations.
-# Copyright (C) 1999 MandrakeSoft.
-# Vladimir Choundalov <choundalovvv@point.pwp.ru>, 2001
-# Aleksey Smirnov <smi@logic.ru>, 1999-2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-11-23 10:07 +0200\n"
-"Last-Translator: Vladimir Choundalov <choundalovvv@point.pwp.ru>\n"
-"Language-Team: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=koi8-r\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "îÁÓÔÒÏÉÔØ ×ÓÅ ÇÏÌÏ×ËÉ ÎÅÚÁ×ÉÓÉÍÏ"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÒÁÓÛÉÒÅÎÉÅ Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "óËÒÏÎÆÉÇÕÒÉÒÏ×ÁÔØ ÔÏÌØËÏ ËÁÒÔÕ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÄÌÑ ÎÅÓËÏÌØËÉÈ ÇÏÌÏ×ÏË"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"÷ÁÛÁ ÓÉÓÔÅÍÁ ÐÏÄÄÅÒÖÉ×ÁÅÔ ÎÁÓÔÒÏÊËÕ ÄÌÑ ÎÅÓËÏÌØËÉÈ ÇÏÌÏ×ÏË.\n"
-"þÔÏ ×Ù ÈÏÔÉÔÅ ÓÄÅÌÁÔØ?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "÷ÉÄÅÏËÁÒÔÁ"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "÷ÙÂÅÒÉÔÅ ×ÉÄÅÏËÁÒÔÕ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "÷ÙÂÅÒÉÔÅ X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "÷ÙÂÅÒÉÔÅ X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ëÁËÕÀ ËÏÎÆÉÇÕÒÁÃÉÀ XFree ×Ù ÈÏÔÉÔÅ ÐÏÌÕÞÉÔØ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÍÏÖÅÔ ÐÏÄÄÅÒÖÉ×ÁÔØ ÁÐÐÁÒÁÔÎÏÅ 3D ÕÓËÏÒÅÎÉÅ, ÎÏ ÔÏÌØËÏ Ó "
-"XFree %s.\n"
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ ÓÅÒ×ÅÒÏÍ XFree %s, ËÏÔÏÒÙÊ ×ÏÚÍÏÖÎÏ ÌÕÞÛÅ "
-"ÐÏÄÄÅÒÖÉ×ÁÅÔ 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÍÏÖÅÔ ÐÏÄÄÅÒÖÉ×ÁÔØ ÁÐÐÁÒÁÔÎÏÅ 3D ÕÓËÏÒÅÎÉÅ × XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s Ó ÁÐÐÁÒÁÔÎÙÍ 3D ÕÓËÏÒÅÎÉÅÍ"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÍÏÖÅÔ ÐÏÄÄÅÒÖÉ×ÁÔØ ÁÐÐÁÒÁÔÎÏÅ 3D ÕÓËÏÒÅÎÉÅ × XFree %s,\n"
-"ïâòáôéôå ÷îéíáîéå - üôï üëóðåòéíåîôáìøîáñ ðïääåòöëá é ÷ïúíïöîï úá÷éóáîéå "
-"÷áûåçï ëïíðøàôåòá."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s Ó üëóðåòéíåîôáìøîùí ÁÐÐÁÒÁÔÎÙÍ 3D ÕÓËÏÒÅÎÉÅÍ"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÍÏÖÅÔ ÐÏÄÄÅÒÖÉ×ÁÔØ ÁÐÐÁÒÁÔÎÏÅ 3D ÕÓËÏÒÅÎÉÅ, ÎÏ ÔÏÌØËÏ × "
-"XFree %s,\n"
-"ïâòáôéôå ÷îéíáîéå - üôï üëóðåòéíåîôáìøîáñ ðïääåòöëá é ÷ïúíïöîï úá÷éóáîéå "
-"÷áûåçï ëïíðøàôåòá.\n"
-"÷ÁÛÁ ×ÉÄÅÏËÁÒÔÁ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ ÓÅÒ×ÅÒÏÍ XFree %s, ËÏÔÏÒÏÊ, ×ÏÚÍÏÖÎÏ, ÌÕÞÛÅ "
-"ÐÏÄÄÅÒÖÉ×ÁÅÔ 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "îÁÓÔÒÏÊËÁ XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "÷ÙÂÅÒÉÔÅ ÒÁÚÍÅÒ ÐÁÍÑÔÉ ×ÁÛÅÊ ×ÉÄÅÏËÁÒÔÙ"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "÷ÙÂÅÒÉÔÅ ÏÐÃÉÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "÷ÙÂÅÒÉÔÅ ÍÏÎÉÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "íÏÎÉÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"ä×Á ËÒÉÔÉÞÅÓËÉÈ ÐÁÒÁÍÅÔÒÁ - ÜÔÏ ÞÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎÏÊ ÒÁÚ×ÅÒÔËÉ, ËÏÔÏÒÁÑ "
-"ÓÕÔØ\n"
-"ÞÁÓÔÏÔÁ ÏÂÎÏ×ÌÅÎÉÑ ×ÓÅÇÏ ÜËÒÁÎÁ, É ÞÔÏ ÅÝÅ ×ÁÖÎÅÅ, ÞÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎÏÊ\n"
-"ÒÁÚ×ÅÒÔËÉ, ËÏÔÏÒÁÑ ÓÕÔØ ÞÁÓÔÏÔÁ ×Ù×ÏÄÁ ÓÔÒÏË ÎÁ ÜËÒÁÎ.\n"
-"\n"
-"üÔÏ ïþåîø ÷áöîï, ÞÔÏÂÙ × ×ÙÂÒÁÎÎÏÍ ÍÏÎÉÔÏÒÅ ÞÁÓÔÏÔÁ ÓÉÎÈÒÏÎÉÚÁÃÉÉ ÎÅ "
-"ÏËÁÚÁÌÁÓØ\n"
-"×ÎÅ ÆÁËÔÉÞÅÓËÉÈ ×ÏÚÍÏÖÎÏÓÔÅÊ ×ÁÛÅÇÏ ÍÏÎÉÔÏÒÁ: ×Ù ÍÏÖÅÔÅ ÉÓÐÏÒÔÉÔØ ÍÏÎÉÔÏÒ.\n"
-" åÓÌÉ ÓÏÍÎÅ×ÁÅÔÅÓØ - ÌÕÞÛÅ ×ÙÂÅÒÉÔÅ ËÏÎÓÅÒ×ÁÔÉ×ÎÙÅ ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "þÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎÏÊ ÒÁÚ×ÅÒÔËÉ"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎÏÊ ÒÁÚ×ÅÒÔËÉ"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "íÏÎÉÔÏÒ ÎÅ ÎÁÓÔÒÏÅÎ"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "÷ÉÄÅÏËÁÒÔÁ ÅÝÅ ÎÅ ÎÁÓÔÒÏÅÎÁ"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "òÁÚÒÅÛÅÎÉÅ ÅÝÅ ÎÅ ×ÙÂÒÁÎÏ"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "èÏÔÉÔÅ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÎÁÓÔÒÏÊËÉ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"ðÒÅÄÕÐÒÅÖÄÅÎÉÅ: ÔÅÓÔÉÒÏ×ÁÎÉÅ ÜÔÏÊ ×ÉÄÅÏËÁÒÔÙ ÍÏÖÅÔ ÐÒÉ×ÅÓÔÉ Ë ÚÁ×ÉÓÁÎÉÀ "
-"ËÏÍÐØÀÔÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "ðÒÏ×ÅÒËÁ ÎÁÓÔÒÏÅË"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ÐÏÐÒÏÂÕÊÔÅ ÉÚÍÅÎÉÔØ ÎÅËÏÔÏÒÙÅ ÐÁÒÁÍÅÔÒÙ"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "úÁ×ÅÒÛÅÎÉÅ ÞÅÒÅÚ %d ÓÅËÕÎÄ"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "üÔÉ ÕÓÔÁÎÏ×ËÉ ×ÅÒÎÙ?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ, ÐÏÐÒÏÂÕÊÔÅ ÉÚÍÅÎÉÔØ ÎÅËÏÔÏÒÙÅ ÐÁÒÁÍÅÔÒÙ"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "òÁÚÒÅÛÅÎÉÅ"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "÷ÙÂÏÒ ÒÁÚÒÅÛÅÎÉÑ É ÇÌÕÂÉÎÙ Ã×ÅÔÁ"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "÷ÉÄÅÏËÁÒÔÁ: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "óÅÒ×ÅÒ XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "åÝÅ"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "ïË"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "òÅÖÉÍ üËÓÐÅÒÔ"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "ðÏËÁÚÁÔØ ×ÓÅ"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "òÁÚÒÅÛÅÎÉÑ"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "òÁÓËÌÁÄËÁ ËÌÁ×ÉÁÔÕÒÙ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "ôÉÐ ÍÙÛÉ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "íÙÛØ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "íÏÎÉÔÏÒ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "þÁÓÔÏÔÁ ÇÏÒ.ÒÁÚ×. ÍÏÎÉÔÏÒÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔ.ÒÁÚ×. ÍÏÎÉÔÏÒÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "÷ÉÄÅÏËÁÒÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "÷ÉÄÅÏËÁÒÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "÷ÉÄÅÏÐÁÍÑÔØ: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "çÌÕÂÉÎÁ Ã×ÅÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "òÁÚÒÅÛÅÎÉÅ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "óÅÒ×ÅÒ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "äÒÁÊ×ÅÒ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "ðÏÄÇÏÔÏ×ËÁ ÎÁÓÔÒÏÅË X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "þÔÏ ×Ù ÈÏÔÉÔÅ ÓÄÅÌÁÔØ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "óÍÅÎÉÔÅ ÍÏÎÉÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "óÍÅÎÉÔÅ ×ÉÄÅÏËÁÒÔÕ"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "óÍÅÎÉÔÅ ÏÐÃÉÉ óÅÒ×ÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "óÍÅÎÉÔÅ ÒÁÚÒÅÛÅÎÉÅ"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "ðÏËÁÚÁÔØ ÉÎÆÏÒÍÁÃÉÀ"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "ðÒÏ×ÅÒÉÔØ ÓÎÏ×Á"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "÷ÙÈÏÄ"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"óÏÈÒÁÎÉÔØ ÉÚÍÅÎÅÎÉÑ?\n"
-"ôÅËÕÝÉÅ ÎÁÓÔÒÏÊËÉ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ÐÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"íÏÖÎÏ ÎÁÓÔÒÏÉÔØ ÓÉÓÔÅÍÕ ÄÌÑ Á×ÔÏÍÁÔÉÞÅÓËÏÇÏ ÚÁÐÕÓËÁ X ÐÏÓÌÅ ÚÁÇÒÕÚËÉ.\n"
-"èÏÔÉÔÅ, ÞÔÏÂÙ X ÓÔÁÒÔÏ×ÁÌ ÐÒÉ ÐÅÒÅÚÁÇÒÕÚËÅ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "÷ÏÊÄÉÔÅ ÐÏ×ÔÏÒÎÏ × %s ÄÌÑ ÁËÔÉ×ÁÃÉÉ ÉÚÍÅÎÅÎÉÊ"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "÷ÙÊÄÉÔÅ, Á ÚÁÔÅÍ ÉÓÐÏÌØÚÕÊÔÅ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 Ã×ÅÔÏ× (8 ÂÉÔ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ÔÙÓÑÞÉ Ã×ÅÔÏ× (15 ÂÉÔ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ÔÙÓÑÞ Ã×ÅÔÏ× (16 ÂÉÔ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ÍÉÌÌÉÏÎÏ× Ã×ÅÔÏ× (24 ÂÉÔÁ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ÍÉÌÌÉÁÒÄÁ Ã×ÅÔÏ× (32 ÂÉÔÁ)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ÉÌÉ ÂÏÌØÛÅ"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "óÔÁÎÄÁÒÔÎÙÊ VGA, 640x480 ÐÒÉ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ÐÒÉ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "óÏ×ÍÅÓÔÉÍÁ Ó 8514, 1024x768 ÐÒÉ 87 Hz ÞÒÅÚ-ÓÔÒÏÞÎÙÊ (ÎÅÔ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ÐÒÉ 87 Hz ÞÒÅÚ-ÓÔÒÏÞÎÙÊ, 800x600 ÐÒÉ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ÐÒÉ 60 Hz, 640x480 ÐÒÉ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ÐÒÉ 60 Hz, 800x600 ÐÒÉ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA ÷ÙÓÏËÏÊ þÁÓÔÏÔÙ, 1024x768 ÐÒÉ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1280x1024 ÐÒÉ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1280x1024 ÐÒÉ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1280x1024 ÐÒÉ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1600x1200 ÐÒÉ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor ÓÐÏÓÏÂÎÙÊ ÐÏÄÄÅÒÖÉ×ÁÔØ 1600x1200 ÐÒÉ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "ðÅÒ×ÙÊ ÓÅËÔÏÒ ÚÁÇÒÕÚÏÞÎÏÇÏ ÒÁÚÄÅÌÁ"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "ðÅÒ×ÙÊ ÓÅËÔÏÒ ÕÓÔÒÏÊÓÔ×Á (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "õÓÔÁÎÏ×ËÁ SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "ëÕÄÁ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "õÓÔÁÎÏ×ËÁ LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO Ó ÔÅËÓÔÏ×ÙÍ ÍÅÎÀ"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO Ó ÇÒÁÆÉÞÅÓËÉÍ ÍÅÎÀ"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "úÁÇÒÕÖÁÔØÓÑ ÉÚ DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "çÌÁ×ÎÙÅ ÐÁÒÁÍÅÔÒÙ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "÷ÙÂÏÒ ÉÓÐÏÌØÚÕÅÍÏÇÏ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "õÓÔÁÎÏ×ËÁ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "úÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ÎÅ ÒÁÂÏÔÁÅÔ ÎÁ ÓÔÁÒÙÈ BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "ëÏÍÐÁËÔÎÏ"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "ËÏÍÐÁËÔÎÏ"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "÷ÉÄÅÏ-ÒÅÖÉÍ"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "úÁÄÅÒÖËÁ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ ÏÂÒÁÚÁ ÐÏ ÕÍÏÌÞÁÎÉÀ"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "ðÁÒÏÌØ"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "ðÁÒÏÌØ (ÅÝÅ ÒÁÚ)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "ïÇÒÁÎÉÞÉÔØ ÐÁÒÁÍÅÔÒÙ ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÉ"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ÏÇÒÁÎÉÞÉÔØ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "ïÞÉÝÁÔØ /tmp  ÐÒÉ ËÁÖÄÏÊ ÚÁÇÒÕÚËÅ"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "õËÁÖÉÔÅ ÔÏÞÎÙÊ ÒÁÚÍÅÒ RAM (ÎÁÊÄÅÎÏ %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "òÁÚÒÅÛÉÔØ ÎÅÓËÏÌØËÏ ÐÒÏÆÉÌÅÊ"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "úÁÄÁÊÔÅ ÒÁÚÍÅÒ RAM × Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ðÕÎËÔ ``ïÇÒÁÎÉÞÉÔØ ÏÐÃÉÉ ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÉ'' ÎÅ ÉÓÐÏÌØÚÕÅÔÓÑ ÂÅÚ ÐÁÒÏÌÑ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "ðÏÐÒÏÂÕÊÔÅ ÅÝÅ ÒÁÚ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "ðÁÒÏÌÉ ÎÅ ÓÏ×ÐÁÄÁÀÔ"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "îÁÞÁÌØÎÏÅ ÓÏÏÂÝÅÎÉÅ"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "úÁÄÅÒÖËÁ ÏÔËÒÙÔÉÑ Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "úÁÄÅÒÖËÁ ÚÁÇÒÕÚËÉ ÑÄÒÁ"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "÷ËÌÀÞÉÔØ ÚÁÇÒÕÚËÕ Ó CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "÷ËÌÀÞÉÔØ ÚÁÇÒÕÚËÕ OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "ïÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ ÐÏ ÕÍÏÌÞÁÎÉÀ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"éÍÅÅÔÓÑ ÎÅÓËÏÌØËÏ ÒÁÚÙÎÈ ÐÕÎËÔÏ×.\n"
-"÷Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÅÝÅ, ÉÌÉ ÉÚÍÅÎÉÔØ ÓÕÝÅÓÔ×ÕÀÝÉÅ."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "äÏÂÁ×ÉÔØ"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "çÏÔÏ×Ï"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "éÚÍÅÎÉÔØ"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ëÁËÏÊ ÔÉÐ ÐÕÎËÔÁ ×Ù ÈÏÔÉÔÅ ÄÏÂÁ×ÉÔØ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "äÒÕÇÁÑ ïó (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "äÒÕÇÁÑ ïó (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "äÒÕÇÁÑ ïó (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "ïÂÒÁÚ"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "äÏÂÁ×ÉÔØ"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "þÔÅÎÉÅ-ÚÁÐÉÓØ"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "ôÁÂÌÉÃÁ"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "îÅÂÅÚÏÐÁÓÎÙÊ"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "íÅÔËÁ"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "õÍÏÌÞÁÎÉÅ"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "òÁÚÍÅÒ Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "âÅÚ ÇÒÁÆÉËÉ"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "õÄÁÌÉÔØ ÐÕÎËÔ"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "ðÕÓÔÁÑ ÍÅÔËÁ ÎÅ ÄÏÐÕÓËÁÅÔÓÑ"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÒÁÚÄÅÌ swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "üÔÁ ÍÅÔËÁ ÕÖÅ ÉÓÐÏÌØÚÕÅÔÓÑ"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "îÁÊÄÅÎÙ %s %s ÉÎÔÅÒÆÅÊÓÙ"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "åÓÔØ ÌÉ Õ ×ÁÓ ÄÒÕÇÏÊ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "åÓÔØ ÌÉ Õ ×ÁÓ ËÁËÉÅ-ÌÉÂÏ %s ÉÎÔÅÒÆÅÊÓÙ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "îÅÔ"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "äÁ"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "óÍ. ÏÐÉÓÁÎÉÅ ÏÂÏÒÕÄÏ×ÁÎÉÑ"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "õÓÔÁÎÏ×ËÁ ÄÒÁÊ×ÅÒÁ ÄÌÑ %s ËÁÒÔÙ %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(ÍÏÄÕÌØ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ëÁËÏÊ %s ÄÒÁÊ×ÅÒ ÍÎÅ ÐÏÐÒÏÂÏ×ÁÔØ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"÷ ÎÅËÏÔÏÒÙÈ ÓÌÕÞÁÑÈ %s ÄÒÁÊ×ÅÒÕ ÎÕÖÎÁ ÎÅËÏÔÏÒÁÑ ÄÏÐÏÌÎÉÔÅÌØÎÁÑ ÉÎÆÏÒÍÁÃÉÑ,\n"
-"ÈÏÔÑ ÏÂÙÞÎÏ ÜÔÏÇÏ ÎÅ ÔÒÅÂÕÅÔÓÑ. îÅ ÈÏÔÉÔÅ ÌÉ ×Ù ÚÁÄÁÔØ ÄÌÑ ÎÅÇÏ\n"
-" ÄÏÐÏÌÎÉÔÅÌØÎÙÅ ÐÁÒÁÍÅÔÒÙ ÉÌÉ ÐÏÚ×ÏÌÉÔÅ ÄÒÁÊ×ÅÒÕ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÍÁÛÉÎÕ\n"
-"× ÐÏÉÓËÁÈ ÎÅÏÂÈÏÄÉÍÏÊ ÉÎÆÏÒÍÁÃÉÉ? ÷ÏÚÍÏÖÎÏ, ÔÅÓÔÉÒÏ×ÁÎÉÅ ÐÏÄ×ÅÓÉÔ ËÏÍÐØÀÔÅÒ, "
-"ÎÏ ÏÎÏ \n"
-"ÎÅ ×ÙÚÏ×ÅÔ ÎÉËÁËÉÈ ÐÏ×ÒÅÖÄÅÎÉÊ."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "á×ÔÏÐÏÉÓË"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "õËÁÖÉÔÅ ÐÁÒÁÍÅÔÒÙ"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ÚÁÄÁ×ÁÔØ ÐÁÒÁÍÅÔÒÙ ÄÌÑ ÍÏÄÕÌÑ %s.\n"
-"ðÁÒÁÍÅÔÒÙ ÚÁÄÁÀÔÓÑ × ÆÏÒÍÁÔÅ ``ÉÍÑ=ÚÎÁÞÅÎÉÅ ÉÍÑ2=ÚÎÁÞÅÎÉÅ2 ...''.\n"
-"îÁÐÒÉÍÅÒ, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "ðÁÒÁÍÅÔÒÙ ÍÏÄÕÌÑ:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"úÁÇÒÕÚËÁ ÍÏÄÕÌÑ %s ÚÁ×ÅÒÛÉÌÁÓØ ÎÅÕÄÁÞÎÏ.\n"
-"èÏÔÉÔÅ ÐÏÐÒÏÂÏ×ÁÔØ ÅÝÅ Ó ÄÒÕÇÉÍÉ ÐÁÒÁÍÅÔÒÁÍÉ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ÕÖÅ ÄÏÂÁ×ÌÅÎÏ %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "üÔÏÔ ÐÁÒÏÌØ ÓÌÉÛËÏÍ ÐÒÏÓÔ"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "÷×ÅÄÉÔÅ ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"éÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ ÄÏÌÖÎÏ ÓÏÄÅÒÖÁÔØ ÂÕË×Ù ÔÏÌØËÏ × ÎÉÖÎÅÍ ÒÅÇÉÓÔÒÅ, \n"
-"ÃÉÆÒÙ , `-' É `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "üÔÏ ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ ÕÖÅ ÄÏÂÁ×ÌÅÎÏ"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "äÏÂÁ×ÉÔØ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"÷×ÅÓÔÉ ÐÏÌØÚÏ×ÁÔÅÌÑ\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "ðÒÉÎÑÔØ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "îÁÓÔÏÑÝÅÅ ÉÍÑ"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "ðÏÌØÚÏ×ÁÔÅÌØÓËÏÅ ÉÍÑ"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "ïÂÏÌÏÞËÁ"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "ðÉËÔÏÇÒÁÍÍÁ"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "á×ÔÏ-×ÈÏÄ"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"íÏÖÅÍ ÎÁÓÔÒÏÉÔØ ×ÁÛ ËÏÍÐØÀÔÅÒ ÄÌÑ Á×ÔÏÍÁÔÉÞÅÓËÏÇÏ ×ÈÏÄÁ ÏÄÎÏÇÏ "
-"ÐÏÌØÚÏ×ÁÔÅÌÑ.\n"
-"åÓÌÉ ×Ù ÎÅ ÈÏÔÉÔÅ ÐÏÌØÚÏ×ÁÔØÓÑ ÜÔÏÊ ×ÏÚÍÏÖÎÏÓÔØÀ, ÎÁÖÍÉÔÅ ÎÁ ËÎÏÐËÕ ïÔÍÅÎÉÔØ."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÏÌØÚÏ×ÁÔÅÌÑ ÐÏ ÕÍÏÌÞÁÎÉÀ:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "÷ÙÂÅÒÉÔÅ ÍÅÎÅÄÖÅÒ ÏËÏÎ ÄÌÑ ÚÁÐÕÓËÁ:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "õËÁÖÉÔÅ, ËÁËÏÊ ÑÚÙË ÉÓÐÏÌØÚÏ×ÁÔØ."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "÷Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÄÒÕÇÉÅ ÑÚÙËÉ, ËÏÔÏÒÙÅ ÂÕÄÕÔ ÄÏÓÔÕÐÎÙ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "÷ÓÅ"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "äÏÂÁ×ÉÔØ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "óÐÅÃÉÁÌØÎÁÑ"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "úÁÐÕÓËÁÅÔÓÑ CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"üÔÏÔ ÐÁËÅÔ ÓÌÅÄÕÅÔ ÏÂÎÏ×ÉÔØ\n"
-"÷Ù Õ×ÅÒÅÎÙ, ÞÔÏ ÈÏÔÉÔÅ ÏÔÍÅÎÉÔØ ÅÇÏ ×ÙÂÏÒ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "ïÔÍÅÎÁ"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "óÌÁÂÙÊ"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "óÔÁÎÄÁÒÔÎÁÑ"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "÷ÙÓÏËÉÊ"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "÷ÙÓÏËÉÊ"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "ðÁÒÁÎÏÉÄÁÌØÎÙÊ"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"üÔÏÔ ÕÒÏ×ÅÎØ ÎÁÄÏ ÉÓÐÏÌØÚÏ×ÁÔØ Ó ÏÓÔÏÒÏÖÎÏÓÔØÀ. óÉÓÔÅÍÁ ÓÔÁÎÏ×ÉÔÓÑ\n"
-"ÐÒÏÝÅ × ÉÓÐÏÌØÚÏ×ÁÎÉÉ, ÎÏ ÂÏÌÅÅ ÞÕ×ÓÔ×ÉÔÅÌØÎÏÊ: ÜÔÏÔ ÕÒÏ×ÅÎØ ÎÅ ÓÌÅÄÕÅÔ "
-"ÉÓÐÏÌØÚÏ×ÁÔØ\n"
-"ÎÁ ÍÁÛÉÎÁÈ, ÐÏÄËÌÀÞÅÎÎÙÍ Ë ÓÅÔÉ ÉÌÉ Ë Internet. ÷ÈÏÄ ÎÅ ÚÁÝÉÝÅÎ ÐÁÒÏÌÅÍ."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"ðÁÒÏÌÉ ÔÅÐÅÒØ ×ËÌÀÞÅÎÙ, ÎÏ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ËÏÍÐØÀÔÅÒÁ × ËÁÞÅÓÔ×Å ÓÅÔÅ×ÏÇÏ\n"
-"ÐÏ-ÐÒÅÖÎÅÍÕ ÎÅ ÒÅËÏÍÅÎÄÕÅÔÓÑ."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"üÔÏ ÓÔÁÎÄÁÒÔÎÁÑ ÂÅÚÏÐÁÓÎÏÓÔØ, ÒÅËÏÍÅÎÄÕÅÍÁÑ ÄÌÑ ËÏÍÐØÀÔÅÒÁ,\n"
-"ÐÏÄÓÏÅÄÉÎÅÎÎÏÇÏ Ë Internet × ËÁÞÅÓÔ×Å ËÌÉÅÎÔÁ. äÏÂÁ×ÌÅÎÙ ÎÏ×ÙÅ ÐÒÏ×ÅÒËÉ\n"
-"ÎÁ ÂÅÚÏÐÁÓÎÏÓÔØ."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"îÁ ÜÔÏÍ ÕÒÏ×ÎÅ ÂÅÚÏÐÁÓÎÏÓÔÉ ÓÔÁÎÏ×ÉÔÓÑ ×ÏÚÍÏÖÎÙÍ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ÓÉÓÔÅÍÙ\n"
-"× ËÁÞÅÓÔ×Å ÓÅÒ×ÅÒÁ. âÅÚÏÐÁÓÎÏÓÔØ ÔÅÐÅÒØ ÄÏÓÔÁÔÏÞÎÏ ×ÙÓÏËÁ ÄÌÑ ÒÁÂÏÔÙ\n"
-"ÓÅÒ×ÅÒÁ, ÄÏÐÕÓËÁÀÝÅÇÏ ÓÏÅÄÉÎÅÎÉÑ ÓÏ ÍÎÏÇÉÍÉ ËÌÉÅÎÔÁÍÉ."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"íÙ ÐÒÉÎÑÌÉ ÎÁÓÔÒÏÊËÉ ÞÅÔ×ÅÒÔÏÇÏ ÕÒÏ×ÎÑ ÂÅÚÏÐÁÓÎÏÓÔÉ, ÎÏ ÔÅÐÅÒØ ÓÉÓÔÅÍÁ "
-"ÐÏÌÎÏÓÔØÀ ÚÁËÒÙÔÁ.\n"
-"ðÁÒÁÍÅÔÒÙ ÂÅÚÏÐÁÓÎÏÓÔÉ ÕÓÔÁÎÏ×ÌÅÎÙ ÎÁ ÍÁËÓÉÍÕÍ."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "õÒÏ×ÅÎØ ÂÅÚÏÐÁÓÎÏÓÔÉ"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "îÁÓÔÒÏÊËÁ ÕÒÏ×ÅÎØ ÂÅÚÏÐÁÓÎÏÓÔÉ"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "÷ÙÂÅÒÉÔÅ ÏÐÃÉÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ %s ÄÉÓÐÅÔÞÅÒ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ!\n"
-"\n"
-"÷ÙÂÅÒÉÔÅ ÏÐÅÒÁÃÉÏÎÎÕÀ ÓÉÓÔÅÍÕ ÉÚ ÓÐÉÓËÁ ÉÌÉ\n"
-"ÐÏÄÏÖÄÉÔÅ %d ÓÅËÕÎÄ ÄÌÑ ÚÁÇÒÕÚËÉ ÓÉÓÔÅÍÙ, ÕËÁÚÁÎÎÏÊ ÐÏ ÕÍÏÌÞÁÎÉÀ.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × GRUB, ÄÉÓÐÅÔÞÅÒ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "éÓÐÏÌØÚÕÊÔÅ ËÌÁ×ÉÛÉ %c É %c ÄÌÑ ×ÙÄÅÌÅÎÉÑ ÐÕÎËÔÁ."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "îÁÖÍÉÔÅ enter ÄÌÑ ÚÁÇÒÕÚËÉ ×ÙÂÒÁÎÎÏÊ ïó, 'e' ÄÌÑ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ËÏÍÁÎÄ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ, ÉÌÉ 'c' ÄÌÑ ÒÅÖÉÍÁ ËÏÍÁÎÄÎÏÊ ÓÔÒÏËÉ."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "÷ÙÂÒÁÎÎÙÊ ÐÕÎËÔ ÂÕÄÅÔ ÚÁÇÒÕÖÅÎ Á×ÔÏÍÁÔÉÞÅÓËÉ ÞÅÒÅÚ %d ÓÅËÕÎÄ."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "ÎÅ È×ÁÔÁÅÔ ÍÅÓÔÁ × /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "òÁÂÏÞÉÊ ÓÔÏÌ"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "óÔÁÒÔÏ×ÏÅ ÍÅÎÀ"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "ëÕÄÁ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ÓÐÒÁ×ËÁ ÐÏËÁ ÎÅ ÓÏÚÄÁÎÁ.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ×ÉÄÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_æÁÊÌ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/æÁÊÌ/_÷ÙÈÏÄ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "íÏÎÉÔÏÒ ËÁÔÅÇÏÒÉÉ NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle íÏÎÉÔÏÒ"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ôÒÁÄÉÃÉÏÎÎÙÊ ÍÏÎÉÔÏÒ"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ôÒÁÄÉÃÉÏÎÎÙÊ Gtk+ ÍÏÎÉÔÏÒ"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "úÁÐÕÓËÁÔØ Aurora ÐÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "òÅÖÉÍ Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "òÅÖÉÍ Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×Ù ÉÓÐÏÌØÚÕÅÔÅ %s × ËÁÞÅÓÔ×Å ÍÅÎÅÄÖÅÒÁ ÚÁÇÒÕÚËÉ.\n"
-"÷ÙÂÅÒÉÔÅ ÐÕÎËÔ îÁÓÔÒÏÊËÁ ÄÌÑ ÚÁÐÕÓËÁ ÍÁÓÔÅÒÁ ÎÁÓÔÒÏÊËÉ."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "îÁÓÔÒÏÊËÁ"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "óÉÓÔÅÍÎÙÊ ÒÅÖÉÍ"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "úÁÐÕÓËÁÔØ X-Window ÐÒÉ ÎÁÞÁÌÅ ÒÁÂÏÔÙ"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "îÅÔ, Ñ ÎÅ ÈÏÞÕ ÉÓÐÏÌØÚÏ×ÁÔØ Á×ÔÏÍÁÔÉÞÅÓËÉÊ ×ÈÏÄ × ÓÉÓÔÅÍÕ"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"äÁ, Ñ ÈÏÞÕ ÉÓÐÏÌØÚÏ×ÁÔØ Á×ÔÏÍÁÔÉÞÅÓËÉÊ ×ÈÏÄ × ÓÉÓÔÅÍÕ Ó ÜÔÉÍÉ (user, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÎÅ×ÏÚÍÏÖÎÏ ÏÔËÒÙÔØ ÄÌÑ ÞÔÅÎÉÑ /etc/inittab : %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Gb"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Kb"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "Tb"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ÍÉÎÕÔ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ÍÉÎÕÔÁ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ÓÅËÕÎÄ"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "äÏÂÁ×ÌÅÎÉÅ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ× ÎÅ×ÏÚÍÏÖÎÏ"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "÷Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÄÒÕÇÉÅ ÑÚÙËÉ, ËÏÔÏÒÙÅ ÂÕÄÕÔ ÄÏÓÔÕÐÎÙ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "æÒÁÎÃÕÚÓËÉÊ"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "âÅÌØÇÉÊÓËÉÊ"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "îÅÍÅÃËÉÊ"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "çÒÅÞÅÓËÉÊ"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "îÏÒ×ÅÖÓËÉÊ"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "û×ÅÄÓËÉÊ"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "éÔÁÌØÑÎÓËÉÊ"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÁÑ"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "ðÒÅÖÄÅ ×ÓÅÇÏ ÓÄÅÌÁÊÔÅ ÒÅÚÅÒ×ÎÕÀ ËÏÐÉÀ ÄÁÎÎÙÈ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "þÉÔÁÊÔÅ ×ÎÉÍÁÔÅÌØÎÏ!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"åÓÌÉ ÐÌÁÎÉÒÕÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ aboot, ÏÓÔÁ×ØÔÅ Ó×ÏÂÏÄÎÏÅ ÍÅÓÔÏ (2048 ÓÅËÔÏÒÏ× "
-"ÂÕÄÅÔ ÄÏÓÔÁÔÏÞÎÏ)\n"
-"× ÎÁÞÁÌÅ ÄÉÓËÁ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "ïÛÉÂËÁ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "íÁÓÔÅÒ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "÷ÙÂÅÒÉÔÅ ÄÅÊÓÔ×ÉÅ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"õ ×ÁÓ ÅÓÔØ ÔÏÌØËÏ ÂÏÌØÛÏÊ ÒÁÚÄÅÌ FAT\n"
-"(ÏÂÙÞÎÏ ÉÓÐÏÌØÚÕÅÍÙÊ MicroSoft Dos/Windows).\n"
-"ðÒÅÄÌÁÇÁÀ ÐÒÅÖÄÅ ×ÓÅÇÏ ÉÚÍÅÎÉÔØ ÒÁÚÍÅÒ ÒÁÚÄÅÌÁ\n"
-"(ËÌÉËÎÉÔÅ ÎÁ ÎÅÇÏ, Á ÚÁÔÅÍ ÎÁ \"éÚÍÅÎÉÔØ ÒÁÚÍÅÒ\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "ðÏÖÁÌÕÊÓÔÁ ÎÁÖÍÉÔÅ ÎÁ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "ðÏÄÒÏÂÎÏÓÔÉ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ÏÛÉÂËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "ðÕÓÔÏ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "äÒÕÇÉÅ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "ôÉÐÙ ÆÁÊÌÏ×ÙÈ ÓÉÓÔÅÍ:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "óÏÚÄÁÔØ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "ôÉÐ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "÷ÍÅÓÔÏ ÜÔÏÇÏ ÉÓÐÏÌØÚÕÊÔÅ ``%s'' "
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "õÄÁÌÉÔØ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "óÎÁÞÁÌÁ ÓÄÅÌÁÊÔÅ ``ïÔÍÏÎÔÉÒÏ×ÁÔØ''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"ðÏÓÌÅ ÉÚÍÅÎÅÎÉÑ ÔÉÐÁ ÒÁÚÄÅÌÁ %s, ×ÓÅ ÄÁÎÎÙÅ × ÜÔÏÍ ÒÁÚÄÅÌÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "÷ÙÂÅÒÉÔÅ ÄÅÊÓÔ×ÉÅ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "óÏÚÄÁÔØ ÎÏ×ÙÊ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "ðÅÒÅËÌÀÞÅÎÉÅ × ÒÅÖÉÍ üËÓÐÅÒÔ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "ðÅÒÅËÌÀÞÅÎÉÅ × ÒÅÖÉÍ îÏÒÍÁÌØÎÏ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "ïÔËÁÔ"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏÌÖÁÔØ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "÷ÙÊÔÉ ÂÅÚ ÓÏÈÒÁÎÅÎÉÑ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "÷ÙÊÔÉ ÂÅÚ ÚÁÐÉÓÉ ÔÁÂÌÉÃÙ ÒÁÚÄÅÌÏ×?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "èÏÔÉÔÅ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÎÁÓÔÒÏÊËÉ?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "òÁÚÍÅÓÔÉÔØ Á×ÔÏÍÁÔÉÞÅÓËÉ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "ïÞÉÓÔÉÔØ ×ÓÅ"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÖÅÓÔËÏÇÏ ÄÉÓËÁ"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "÷ÓÅ ÐÅÒ×ÉÞÎÙÅ ÒÁÚÄÅÌÙ ÕÖÅ ÉÓÐÏÌØÚÏ×ÁÎÙ"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "äÏÂÁ×ÌÅÎÉÅ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ× ÎÅ×ÏÚÍÏÖÎÏ"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"þÔÏÂÙ ÐÏÌÕÞÉÔØ ÂÏÌØÛÅ ÒÁÚÄÅÌÏ×, ÕÄÁÌÉÔÅ ÏÄÉÎ, ÞÔÏÂÙ ÐÏÌÕÞÉÔØ ×ÏÚÍÏÖÎÏÓÔØ "
-"ÓÏÚÄÁÔØ ÒÁÛÉÒÅÎÎÙÊ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "úÁÐÉÓÁÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "úÁÐÁÓÎÁÑ ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "úÁÐÁÓÎÁÑ ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "úÁÐÁÓÎÁÑ ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "á×ÔÏÍÏÎÔÉÒÏ×ÁÎÉÅ ÓßÅÍÎÙÈ ÎÏÓÉÔÅÌÅÊ"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "÷ÙÂÅÒÉÔÅ ÆÁÊÌ"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"òÅÚÅÒ×ÎÁÑ ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ× ÄÉÓËÁ ÉÍÅÅÔ ÄÒÕÇÏÊ ÒÁÚÍÅÒ\n"
-"÷ÓÅ-ÔÁËÉ ÐÒÏÄÏÌÖÉÔØ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "÷ÎÉÍÁÎÉÅ"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"÷ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ\n"
-"÷ÓÅ ÄÁÎÎÙÅ ÎÁ ÜÔÏÊ ÄÉÓËÅÔÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "ðÒÏÂÕÅÍ ×ÏÓÓÔÁÎÏ×ÉÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "ðÏËÁÚÁÔØ ÉÎÆÏÒÍÁÃÉÀ"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "ðÁÒÁÍÅÔÒÙ"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "éÚÍÅÎÉÔØ ÒÁÚÍÅÒ"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "ðÅÒÅÍÅÓÔÉÔØ"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÔØ"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "íÏÎÔÉÒÏ×ÁÎÉÅ"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "äÏÂÁ×ÉÔØ Ë RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "äÏÂÁ×ÉÔØ Ë LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "ïÔÍÏÎÔÉÒÏ×ÁÔØ"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "õÄÁÌÉÔØ ÉÚ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "õÄÁÌÉÔØ ÉÚ LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "éÚÍÅÎÉÔØ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "óÏÚÄÁÔØ ÎÏ×ÙÊ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "îÁÞÁÌØÎÙÊ ÓÅËÔÏÒ: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "òÁÚÍÅÒ × MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "ôÉÐ ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "ðÒÅÄÐÏÞÔÅÎÉÅ: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "éÚÍÅÎÉÔØ ÔÉÐ ÒÁÚÄÅÌÁ"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "ëÁËÕÀ ÆÁÊÌÏ×ÕÀ ÓÉÓÔÅÍÕ ×Ù ÈÏÔÉÔÅ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "ëÕÄÁ ×Ù ÈÏÔÉÔÅ ÐÒÉÍÏÎÔÉÒÏ×ÁÔØ loopback ÆÁÊÌ %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ëÕÄÁ ×Ù ÈÏÔÉÔÅ ÐÒÉÍÏÎÔÉÒÏ×ÁÔØ ÕÓÔÒÏÊÓÔ×Ï %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"îÅ ÍÏÇÕ ÏÔÍÅÎÉÔØ ÔÏÞËÕ ÍÏÎÔÉÒÏ×ÁÎÉÑ, ÐÏÓËÏÌØËÕ ÜÔÏÔ ÒÁÚÄÅÌ ÚÁÄÅÊÓÔ×Ï×ÁÎ ÄÌÑ "
-"loop back. óÎÁÞÁÌÁ ÕÂÅÒÉÔÅ loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "÷ÙÞÉÓÌÅÎÉÅ ÇÒÁÎÉà ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "éÚÍÅÎÅÎÉÅ ÒÁÚÍÅÒÁ"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "òÁÚÍÅÒ ÜÔÏÇÏ ÒÁÚÄÅÌÁ ÎÅÌØÚÑ ÉÚÍÅÎÉÔØ"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "äÌÑ ×ÓÅÈ ÄÁÎÎÙÈ × ÜÔÏÍ ÒÁÚÄÅÌÅ ÄÏÌÖÎÁ ÂÙÔØ ÓÄÅÌÁÎÁ ÒÅÚÅÒ×ÎÁÑ ËÏÐÉÑ"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ðÏÓÌÅ ÉÚÍÅÎÅÎÉÑ ÒÁÚÍÅÒÁ ÒÁÚÄÅÌÁ %s ×ÓÅ ÄÁÎÎÙÅ × ÜÔÏÍ ÒÁÚÄÅÌÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "÷ÙÂÒÁÔØ ÎÏ×ÙÊ ÒÁÚÍÅÒ"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "òÁÚÍÅÒ × MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "îÁ ËÁËÏÊ ÄÉÓË ÈÏÔÉÔÅ ÐÅÒÅÍÅÓÔÉÔØ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "óÅËÔÏÒ"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "îÁ ËÁËÏÊ ÓÅËÔÏÒ ÈÏÔÉÔÅ ÐÅÒÅÍÅÓÔÉÔØ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "ðÅÒÅÍÅÝÅÎÉÅ"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "ðÅÒÅÍÅÝÅÎÉÅ ÒÁÚÄÅÌÁ..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "÷ÙÂÅÒÉÔÅ ÓÕÝÅÓÔ×ÕÀÝÉÊ RAID ÄÌÑ ÄÏÂÁ×ÌÅÎÉÑ"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ÎÏ×ÙÊ"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "÷ÙÂÅÒÉÔÅ ÓÕÝÅÓÔ×ÕÀÝÉÊ LVM ÄÌÑ ÄÏÂÁ×ÌÅÎÉÑ"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "éÍÑ LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "üÔÏÔ ÒÁÚÄÅÌ ÎÅÌØÚÑ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "éÍÑ ÆÁÊÌÁ loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "îÁÓÔÏÑÝÅÅ ÉÍÑ"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "æÁÊÌ ÕÖÅ ÉÓÐÏÌØÚÕÅÔÓÑ ÄÒÕÇÉÍ loopback, ×ÙÂÅÒÉÔÅ ÄÒÕÇÏÊ ÆÁÊÌ."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "æÁÊÌ ÕÖÅ ÓÕÝÅÓÔ×ÕÅÔ. éÓÐÏÌØÚÏ×ÁÔØ ÅÇÏ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "ðÁÒÁÍÅÔÒÙ ÍÏÄÕÌÑ:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "ÕÒÏ×ÅÎØ"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ÒÁÚÍÅÒ chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "ïÓÔÏÒÏÖÎÏ: ÜÔÁ ÏÐÅÒÁÃÉÑ ÏÐÁÓÎÁ."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "ëÁËÏÊ ÔÉÐ ÒÁÚÂÉÅÎÉÑ ÎÁ ÒÁÚÄÅÌÙ?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"éÚ×ÉÎÉÔÅ, ÎÏ ÎÅÌØÚÑ ÓÏÚÄÁ×ÁÔØ /boot ÎÁ ÄÉÓËÅ (ÎÁ ÃÉÌÉÎÄÒÅ > 1024).\n"
-"ìÉÂÏ ×Ù ÉÓÐÏÌØÚÕÅÔÅ LILO - ÔÏÇÄÁ ÜÔÏ ÎÅ ÂÕÄÅÔ ÒÁÂÏÔÁÔØ, ÌÉÂÏ LILO ÎÅ "
-"ÉÓÐÏÌØÚÕÅÔÓÑ, É ÔÏÇÄÁ /boot ÎÅ ÎÕÖÅÎ."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"òÁÚÄÅÌ, ×ÙÂÒÁÎÎÙÊ ×ÁÍÉ ÄÌÑ ÄÏÂÁ×ÌÅÎÉÑ × ËÁÞÅÓÔ×Å ËÏÒÎÅ×ÏÇÏ (/) ÆÉÚÉÞÅÓËÉ "
-"ÒÁÓÐÏÌÏÖÅÎ ÐÏÓÌÅ\n"
-"1024-ÇÏ ÃÉÌÉÎÄÒÁ ÖÅÓÔËÏÇÏ ÄÉÓËÁ, Á Õ ×ÁÓ ÎÅÔ ÒÁÚÄÅÌÁ /boot .\n"
-"åÓÌÉ ÂÕÄÅÔ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÄÉÓÐÅÔÞÅÒ ÚÁÇÒÕÚËÉ LILO, ÎÅ ÚÁÂÕÄØÔÅ ÄÏÂÁ×ÉÔØ "
-"ÒÁÚÄÅÌ /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"÷Ù ×ÙÂÒÁÌÉ ÒÁÚÄÅÌ ÐÒÏÇÒÁÍÍÎÏÇÏ RAID × ËÁÞÅÓÔ×Å ËÏÒÎÅ×ÏÇÏ (/).\n"
-"îÉËÁËÏÊ ÚÁÇÒÕÚÞÉË ÎÅ ÓÍÏÖÅÔ ÜÔÏ ÏÂÒÁÂÏÔÁÔØ ÂÅÚ ÒÁÚÄÅÌÁ /boot.\n"
-"ôÁË ÞÔÏ ÎÅ ÚÁÂÕÄØÔÅ ÄÏÂÁ×ÉÔØ ÒÁÚÄÅÌ /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ôÁÂÌÉÃÁ ÒÁÚÄÅÌÏ× ÕÓÔÒÏÊÓÔ×Á %s ÂÕÄÅÔ ÚÁÐÉÓÁÎÁ ÎÁ ÄÉÓË!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "þÔÏÂÙ ÉÚÍÅÎÅÎÉÑ ÏÓÕÝÅÓÔ×ÉÌÉÓØ, ÎÅÏÂÈÏÄÉÍÏ ÐÅÒÅÚÁÇÒÕÚÉÔØÓÑ"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"ðÏÓÌÅ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ÒÁÚÄÅÌÁ %s, ×ÓÅ ÄÁÎÎÙÅ × ÜÔÏÍ ÒÁÚÄÅÌÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÒÁÚÄÅÌÁ %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid ÎÅ ÓÒÁÂÏÔÁÌ"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ Ó×ÏÂÏÄÎÏÇÏ ÍÅÓÔÁ ÄÌÑ ÒÁÚÍÅÝÅÎÉÑ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ Ó×ÏÂÏÄÎÏÇÏ ÍÅÓÔÁ ÄÌÑ ÒÁÚÍÅÝÅÎÉÑ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ×"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "òÁÚÒÅÛÅÎÉÅ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "õÓÔÒÏÊÓÔ×Ï: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "ÂÕË×Á ÄÌÑ DOS-ÄÉÓËÁ: %s (ÎÁÕÇÁÄ)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "ôÉÐ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "éÍÑ: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "îÁÞÁÌÏ: ÓÅËÔÏÒ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "òÁÚÍÅÒ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ÓÅËÔÏÒÏ×"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "ó ÃÉÌÉÎÄÒÁ %d ÐÏ ÃÉÌÉÎÄÒ %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "ïÔÆÏÒÍÁÔÉÒÏ×ÁÎÏ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "îÅ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÏ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "ðÒÉÍÏÎÔÉÒÏ×ÁÎÏ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback ÆÁÊÌ(Ù): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"òÁÚÄÅÌ, ÚÁÇÒÕÖÁÅÍÙÊ ÐÏ ÕÍÏÌÞÁÎÉÀ\n"
-"    (ÄÌÑ ÚÁÇÒÕÚËÉ MS-DOS, ÎÅ ÄÌÑ lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "õÒÏ×ÅÎØ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "òÁÚÍÅÒ Óhunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "äÉÓËÉ RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "éÍÑ ÆÁÊÌÁ Loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"åÓÔØ ×ÅÒÏÑÔÎÏÓÔØ, ÞÔÏ ÜÔÏÔ ÒÁÚÄÅÌ\n"
-"Ñ×ÌÑÅÔÓÑ ÒÁÚÄÅÌÏÍ ÄÒÁÊ×ÅÒÁ, ×ÏÚÍÏÖÎÏ,\n"
-"×ÁÍ ÎÅ ÓÌÅÄÕÅÔ ÅÇÏ ÔÒÏÇÁÔØ.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"üÔÏÔ ÓÐÅÃÉÁÌØÎÙÊ Bootstrap\n"
-"ÒÁÚÄÅÌ ÐÒÅÄÎÁÚÎÁÞÅÎ\n"
-"ÄÌÑ ×ÏÚÍÏÖÎÏÓÔÉ ÚÁÇÒÕÚËÉ Ä×ÕÈ ÏÐ.ÓÉÓÔÅÍ.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "òÁÚÍÅÒ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "çÅÏÍÅÔÒÉÑ: %s ÃÉÌÉÎÄÒÏ×, %s ÇÏÌÏ×ÏË, %s ÓÅËÔÏÒÏ×\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "éÎÆÏÒÍÁÃÉÑ: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-ÄÉÓËÉ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ôÉÐ ÔÁÂÌÉÃÙ ÒÁÚÄÅÌÏ×: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ÎÁ ÛÉÎÅ %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "ðÁÒÁÍÅÔÒÙ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "ôÉÐ ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "üÔÏÔ ÐÁÒÏÌØ ÓÌÉÛËÏÍ ÐÒÏÓÔ (ÅÇÏ ÄÌÉÎÁ ÄÏÌÖÎÁ ÂÙÔØ ÎÅ ÍÅÎÅÅ %d ÓÉÍ×ÏÌÏ×)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "ðÁÒÏÌÉ ÎÅ ÓÏ×ÐÁÄÁÀÔ"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "éÚÍÅÎÉÔØ ÔÉÐ ÒÁÚÄÅÌÁ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "ðÏÖÁÌÕÊÓÔÁ ÎÁÖÍÉÔÅ ÎÁ ÒÁÚÄÅÌ"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ÓÅÒ×ÅÒ"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ÏÛÉÂËÁ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "îÅ ÚÎÁÀ ËÁË ÆÏÒÍÁÔÉÒÏ×ÁÔØ %s Ó ÔÉÐÏÍ %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ÏÛÉÂËÁ ÏÔÍÏÎÔÉÒÏ×ÁÎÉÑ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "ÐÒÏÓÔÏÊ"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ÓÅÒ×ÅÒ"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ JFS ÎÁ ÒÁÚÄÅÌÁÈ ÍÅÎØÛÅ 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ReiserFS ÎÁ ÒÁÚÄÅÌÁÈ ÍÅÎØÛÅ 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ ÄÏÌÖÎÁ ÎÁÞÉÎÁÔØÓÑ Ó /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "õÖÅ ÅÓÔØ ÒÁÚÄÅÌ Ó ÔÏÞËÏÊ ÍÏÎÔÉÒÏ×ÁÎÉÑ %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ìÏÇÉÞÅÓËÉÊ ôÏÍ LVM ÄÌÑ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "üÔÁ ÄÉÒÅËÔÏÒÉÑ ÄÏÌÖÎÁ ÏÓÔÁ×ÁÔØÓÑ ×ÎÕÔÒÉ ËÏÒÎÅ×ÏÊ ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"äÌÑ ÜÔÏÊ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ ÎÕÖÎÁ ÒÅÁÌØÎÁÑ ÆÁÊÌÏ×ÁÑ ÓÉÓÔÅÍÁ (ext2, "
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ìÏÇÉÞÅÓËÉÊ ôÏÍ LVM ÄÌÑ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ Ó×ÏÂÏÄÎÏÇÏ ÍÅÓÔÁ ÄÌÑ Á×ÔÏ-ÒÁÚÍÅÝÅÎÉÑ"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ïÛÉÂËÁ ÏÔËÒÙÔÉÑ %s ÄÌÑ ÚÁÐÉÓÉ: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ: ÎÅ ÎÁÊÄÅÎÙ ÕÓÔÒÏÊÓÔ×Á ÄÌÑ ÓÏÚÄÁÎÉÑ ÎÏ×ÙÈ ÆÁÊÌÏ×ÙÈ ÓÉÓÔÅÍ. "
-"ðÒÏ×ÅÒØÔÅ ÏÂÏÒÕÄÏ×ÁÎÉÅ ÄÌÑ ×ÙÑÓÎÅÎÉÑ ×ÅÒÏÑÔÎÏÊ ÐÒÉÞÉÎÙ."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "õ ×ÁÓ ÎÅ ÓÏÚÄÁÎÏ ÎÉËÁËÉÈ ÒÁÚÄÅÌÏ×!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"÷ÙÛÅ ÐÅÒÅÞÉÓÌÅÎÙ ÓÕÝÅÓÔ×ÕÀÝÉÅ ÒÁÚÄÅÌÙ Linux, ÏÂÎÁÒÕÖÅÎÎÙÅ ÎÁ\n"
-"×ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ. ÷Ù ÍÏÖÅÔÅ ÏÓÔÁ×ÉÔØ ÉÚÍÅÎÅÎÉÑ, ÓÄÅÌÁÎÎÙÅ ÍÁÓÔÅÒÏÍ, "
-"ÏÂÙÞÎÏ ÏÎÉ ÐÏÄÈÏÄÑÔ \n"
-". åÓÌÉ ×Ù ÉÈ ÉÚÍÅÎÉÔÅ, ÷Ù ÄÏÌÖÎÙ ËÁË ÍÉÍÎÉÍÕÍ ÚÁÄÁÔØ ËÏÒÎÅ×ÏÊ (root)\n"
-"ÒÁÚÄÅÌ (\"/\"). îÅ ÄÅÌÁÊÔÅ ÅÇÏ ÓÌÉÛËÏÍ ÍÁÌÅÎØËÉÍ, ÉÎÁÞÅ ×Ù ÎÅ ÓÍÏÖÅÔÅ "
-"ÕÓÔÁÎÏ×ÉÔØ ×ÓÅ ÎÕÖÎÙÅ ÐÒÏÇÒÁÍÍÙ \n"
-". åÓÌÉ ×Ù ÈÏÔÉÔÅ ÈÒÁÎÉÔØ ÷ÁÛÉ ÄÁÎÎÙÅ ÎÁ ÏÔÄÅÌØÎÏÍ ÒÁÚÄÅÌÅ ÷ÁÍ ÔÁËÖÅ,\n"
-"ÐÏÔÒÅÂÕÅÔÓÑ ×ÙÂÒÁÔØ \"/home\" (ÜÔÏ ×ÏÚÍÏÖÎÏ ÌÉÛØ × ÔÏÍ ÓÌÕÞÁÅ, ËÏÇÄÁ Õ ÷ÁÓ "
-"ÅÓÔØ\n"
-"ÂÏÌÅÅ ÏÄÎÏÇÏ ÒÁÚÄÅÌÁ Linux).\n"
-"\n"
-"\n"
-"äÌÑ ÓÐÒÁ×ËÉ - ËÁÖÄÙÊ ÒÁÚÄÅÌ ÏÐÉÓÙ×ÁÅÔÓÑ ÓÌÅÄÕÀÝÉÍ ÏÂÒÁÚÏÍ: \"éÍÑ\", \"åÍËÏÓÔØ"
-"\".\n"
-"\n"
-"\n"
-"\"éÍÑ\" ÏÐÉÓÙ×ÁÅÔÓÑ ÓÌÅÄÕÀÝÉÍ ÏÂÒÁÚÏÍ: \"ÔÉÐ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\", \"ÎÏÍÅÒ "
-"ÖÅÓÔËÏÇÏ ÄÉÓËÁ\",\n"
-"\"ÎÏÍÅÒ ÒÁÚÄÅÌÁ\" (ÎÁÐÒÉÍÅÒ, \"hda1\").\n"
-"\n"
-"\n"
-"\"ôÉÐ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\" - \"hd\" ÅÓÌÉ Õ ÷ÁÓ ÖÅÓÔËÉÊ ÄÉÓË Ó IDE ÉÎÔÅÒÆÅÊÓÏÍ É "
-"\"sd\"\n"
-"ÅÓÌÉ ÜÔÏ SCSI ÄÉÓË.\n"
-"\n"
-"\n"
-"\"îÏÍÅÒ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\" ÜÔÏ ×ÓÅÇÄÁ ÂÕË×Á ÐÏÓÌÅ \"hd\" or \"sd\". äÌÑ "
-"ÖÅÓÔËÉÈ ÄÉÓËÏ× IDE:\n"
-"\n"
-"   * \"a\" ÏÚÎÁÞÁÅÔ \"master ÄÉÓË ÎÁ ÐÅÒ×ÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"b\" ÏÚÎÁÞÁÅÔ \"slave ÄÉÓË ÎÁ ÐÅÒ×ÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"c\" ÏÚÎÁÞÁÅÔ \"master ÄÉÓË ÎÁ ×ÔÏÒÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"d\" ÏÚÎÁÞÁÅÔ \"slave ÄÉÓË ÎÁ ×ÔÏÒÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\".\n"
-"\n"
-"\n"
-"äÌÑ ÖÅÓÔËÉÈ ÄÉÓËÏ× SCSI, \"a\" ÏÚÎÁÞÁÅÔ \"ÐÅÒ×ÙÊ ÄÉÓË\", \"b\" ÏÚÎÁÞÁÅÔ "
-"\"×ÔÏÒÏÊ ÄÉÓË\", É Ô.Ä."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÓÅÒ×ÉÓÙ, ËÏÔÏÒÙÅ ÂÕÄÕÔ ÚÁÐÕÓËÁÔØÓÑ ÐÒÉ ÚÁÇÒÕÚËÅ.\n"
-"\n"
-"\n"
-"ëÏÇÄÁ ×Ù ÎÁ×ÏÄÉÔÅ ÍÙÛØ ÎÁ ÐÕÎËÔ, ÂÕÄÅÔ ÐÏËÁÚÁÎÁ ÍÁÌÅÎØËÁÑ ÐÏÄÓËÁÚËÁ \n"
-"Ó ÏÐÉÓÁÎÉÅÍ ÆÕÎËÃÉÊ ÜÔÏÇÏ ÓÅÒ×ÉÓÁ.\n"
-"\n"
-"\n"
-"âÕÄØÔÅ ÏÞÅÎØ ÁËËÕÒÁÔÎÙ ÎÁ ÜÔÏÍ ÜÔÁÐÅ, ÅÓÌÉ ×Ù ÐÌÁÎÉÒÕÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ×ÁÛÕ "
-"ÍÁÛÉÎÕ × ËÁÞÅÓÔ×Å ÓÅÒ×ÅÒÁ: ×Ù\n"
-"×ÏÚÍÏÖÎÏ ÎÅ ÚÁÈÏÔÉÔÅ ÚÁÐÕÓËÁÔØ ÌÉÛÎÉÅ ÓÅÒ×ÉÓÙ. ðÏÍÎÉÔÅ,\n"
-"ÞÔÏ ÚÁÐÕÓËÁÔØ ÎÅËÏÔÏÒÙÅ ÓÅÒ×ÉÓÙ ÎÁ ÓÅÒ×ÅÒÅ ÎÅÂÅÚÏÐÁÓÎÏ..\n"
-"÷ ÏÓÎÏ×ÎÏÍ, ÖÅÌÁÔÅÌØÎÏ ×ÙÂÉÒÁÔØ ÔÏÌØËÏ ÔÅ ÓÅÒ×ÉÓÙ, ËÏÔÏÒÙÅ ×ÁÍ ÒÅÁÌØÎÏ ÎÕÖÎÙ."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"÷ ÜÔÏÍ ÐÕÎËÔÅ ×ÁÍ ÎÕÖÎÏ ×ÙÂÒÁÔØ ÍÅÓÔÏ ÎÁ ×ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ\n"
-"× ËÏÔÏÒÏÅ ×Ù ÂÕÄÅÔÅ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ Mandrake Linux. åÓÌÉ ÏÎ ÐÕÓÔ ÉÌÉ\n"
-"ÓÕÝÅÓÔ×ÕÀÝÁÑ ÏÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ ÚÁÎÉÍÁÅÔ ×ÓÅ ÄÏÓÔÕÐÎÏÅ ÍÅÓÔÏ, ×ÁÍ "
-"ÐÏÔÒÅÂÕÅÔÓÑ\n"
-"ÒÁÚÂÉÔØ ÄÉÓË ÎÁ ÒÁÚÄÅÌÙ. ðÏ ÓÕÔÉ ÒÁÚÂÉÅÎÉÅ ÎÁ ÒÁÚÄÅÌÙ ÚÁËÌÀÞÁÅÔÓÑ × "
-"ÌÏÇÉÞÅÓËÏÍ\n"
-"ÒÁÚÄÅÌÅÎÉÉ ÄÉÓËÏ×ÏÇÏ ÐÒÏÓÔÒÁÎÓÔ×Á É ÓÏÚÄÁÎÉÅ ÍÅÓÔÁ ÄÌÑ ÕÓÔÁÎÏ×ËÉ Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"ðÏÓËÏÌØËÕ ÐÏÓÌÅ ÒÁÚÂÉÅÎÉÑ ÏÂÙÞÎÏ ÎÅÌØÚÑ ×ÙÐÏÌÎÉÔØ ÏÂÒÁÔÎÕÀ ÐÒÏÃÅÄÕÒÕ,\n"
-"ÒÁÚÂÉÅÎÉÅ ÍÏÖÅÔ ÏËÁÚÁÔØÓÑ ÎÅÐÏÎÑÔÎÙÍ É ÔÒÕÄÎÙÍ, ÅÓÌÉ Õ ×ÁÓ ÎÅÄÏÓÔÁÔÏÞÎÏ "
-"ÏÐÙÔÁ.\n"
-"üÔÏÔ ÍÁÓÔÅÒ ÕÐÒÏÝÁÅÔ ÐÒÏÃÅÓÓ ÒÁÚÂÉÅÎÉÑ. ðÒÅÖÄÅ ÞÅÍ ÎÁÞÁÔØ, ÉÚÕÞÉÔÅ "
-"ÒÕËÏ×ÏÄÓÔ×Ï\n"
-"É ÚÁÐÁÓÉÔÅÓØ ×ÒÅÍÅÎÅÍ.\n"
-"\n"
-"\n"
-"÷ÁÍ ÎÕÖÎÏ ÎÅ ÍÅÎÅÅ Ä×ÕÈ ÒÁÚÄÅÌÏ×. ïÄÉÎ - ÓÏÂÓÔ×ÅÎÎÏ ÄÌÑ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ "
-"É ×ÔÏÒÏÊ\n"
-"ÄÌÑ ×ÉÒÔÕÁÌØÎÏÊ ÐÁÍÑÔÉ (ÎÁÚÙ×ÁÅÍÏÊ ÔÁËÖÅ ÆÁÊÌÏÍ ÐÏÄËÁÞËÉ - Swap).\n"
-"\n"
-"\n"
-"åÓÌÉ ÒÁÚÄÅÌÙ ÕÖÅ ÓÄÅÌÁÎÙ (ÉÚ ÐÒÅÄÙÄÕÝÅÊ ÕÓÔÁÎÏ×ËÉ ÉÌÉ ÄÒÕÇÏÊ\n"
-"ÐÒÏÇÒÁÍÍÏÊ ÒÁÚÂÉÅÎÉÑ), ÔÏÇÄÁ ×ÁÍ ÐÒÏÓÔÏ ÎÕÖÎÏ ÉÈ ×ÙÂÒÁÔØ ÄÌÑ ÕÓÔÁÎÏ×ËÉ "
-"×ÁÛÅÊ\n"
-"Linux ÓÉÓÔÅÍÙ.\n"
-"\n"
-"\n"
-"åÓÌÉ ÒÁÚÄÅÌÙ ÅÝÅ ÎÅ ÓÄÅÌÁÎÙ, ×ÁÍ ÐÏÔÒÅÂÕÅÔÓÑ ÉÈ ÓÏÚÄÁÔØ. \n"
-"þÔÏÂÙ ÜÔÏ ÓÄÅÌÁÔØ, ÉÓÐÏÌØÚÕÊÔÅ ×ÙÛÅÕËÁÚÁÎÎÙÊ ÍÁÓÔÅÒ. ÷ ÚÁ×ÉÓÉÍÏÓÔÉ ÏÔ "
-"ËÏÎÆÉÇÕÒÁÃÉÉ ×ÁÛÅÇÏ ÖÅÓÔËÏÇÏ \n"
-"ÄÉÓËÁ, ×ÏÚÍÏÖÎÙ ÎÅÓËÏÌØËÏ ÒÅÛÅÎÉÊ:\n"
-"\n"
-"* éÓÐÏÌØÚÏ×ÁÔØ ÓÕÝÅÓÔ×ÕÀÝÅÅ ÒÁÚÂÉÅÎÉÅ: ÍÁÓÔÅÒ ÏÂÎÁÒÕÖÉÌ ÏÄÉÎ ÉÌÉ ÎÅÓËÏÌØËÏ "
-"ÓÕÝÅÓÔ×ÕÀÝÉÈ ÒÁÚÄÅÌÏ× Linux ÎÁ ×ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ. ÷ÙÂÅÒÉÔÅ\n"
-"  ÜÔÏÔ ÐÕÎËÔ, ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÈ ÉÓÐÏÌØÚÏ×ÁÔØ. \n"
-"\n"
-"\n"
-"* ïÞÉÓÔÉÔØ ×ÅÓØ ÄÉÓË: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ÐÕÎËÔ, ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÕÄÁÌÉÔØ ×ÓÀ "
-"ÉÎÆÏÒÍÁÃÉÀ É ×ÓÅ ÒÁÚÄÅÌÙ, ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁ ×ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ É ÚÁÍÅÎÉÔØ "
-"ÉÈ \n"
-"  ×ÁÛÅÊ ÎÏ×ÏÊ Mandrake Linux ÓÉÓÔÅÍÏÊ. âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ ÐÒÉÎÉÍÁÑ ÔÁËÏÅ "
-"ÒÅÛÅÎÉÅ - ×ÏÓÓÔÁÎÏ×ÉÔØ ÄÁÎÎÙÅ ÐÏÓÌÅ ÐÏÔÄ×ÅÒÖÄÅÎÉÑ ×ÙÐÏÌÎÅÎÉÑ ÜÔÏÊ ÏÐÅÒÁÃÉÉ\n"
-"  ×Ù ÕÖÅ ÎÅ ÓÍÏÖÅÔÅ.\n"
-"\n"
-"\n"
-"* éÓÐÏÌØÚÏ×ÁÔØ Ó×ÏÂÏÄÎÏÅ ÍÅÓÔÏ × ÒÁÚÄÅÌÅ Windows: ÅÓÌÉ Õ ×ÁÓ ÕÓÔÁÎÏ×ÌÅÎÁ "
-"Microsoft Windows É ÚÁÎÉÍÁÅÔ ×ÓÅ ÍÅÓÔÏ ÎÁ ÖÅÓÔËÏÍ ÄÉÓËÅ, ÔÏ ×ÁÍ ÐÒÉÄÅÔÓÑ\n"
-"  ÓÏÚÄÁÔØ Ó×ÏÂÏÄÎÏÅ ÐÒÏÓÔÒÁÎÓÔ×Ï ÄÌÑ Linux. þÔÏÂÙ ÜÔÏ ÓÄÅÌÁÔØ, ×Ù ÍÏÖÅÔÅ "
-"ÕÄÁÌÉÔØ ×ÁÛ\n"
-"  ÒÁÚÄÅÌ Microsoft Windows É ×ÓÅ ÄÁÎÎÙÅ (ÓÍÏÔÒÉÔÅ ÐÕÎËÔÙ \"ïÞÉÓÔÉÔØ ×ÅÓØ ÄÉÓË"
-"\" ÉÌÉ \"òÅÖÉÍ üËÓÐÅÒÔ\" ) ÉÌÉ ÉÚÍÅÎÉÔØ ÒÁÚÍÅÒ\n"
-"  ×ÁÛÅÇÏ ÒÁÚÄÅÌÁ Microsoft Windows. üÔÏ ÉÚÍÅÎÅÎÉÅ ÍÏÖÅÔ ÂÙÔØ ×ÙÐÏÌÎÅÎÏ ÂÅÚ "
-"ÐÏÔÅÒÉ ÄÁÎÎÙÈ. üÔÏ ÒÅÛÅÎÉÅ ÒÅËÏÍÅÎÄÕÅÔÓÑ\n"
-"  ÅÓÌÉ ×ÙÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ É Mandrake Linux É Microsoft Windows ÎÁ ÏÄÎÏÍ É "
-"ÔÏÍ ÖÅ ËÏÍÐØÀÔÅÒÅ.\n"
-"\n"
-"\n"
-"  ðÅÒÅÄ ×ÙÂÏÒÏÍ ÜÔÏÇÏ ×ÁÒÉÁÎÔÁ, ×ÁÍ ÎÕÖÎÏ ÐÏÎÑÔØ, ÞÔÏ ÒÁÚÍÅÒ ÒÁÚÄÅÌÁ "
-"Microsoft\n"
-"  Windows ÂÕÄÅÔ ÍÅÎØÛÅ, ÞÅÍ ÓÕÝÅÓÔ×ÕÀÝÉÊ. üÔÏ ÏÚÎÁÞÁÅÔ, ÞÔÏ Õ ×ÁÓ ÂÕÄÅÔ "
-"ÍÅÎØÛÅ ÍÅÓÔÁ ÐÏÄ \n"
-"  Microsoft Windows ÄÌÑ ÈÒÁÎÅÎÉÑ ÉÎÆÏÒÍÁÃÉÉ É ÕÓÔÁÎÏ×ËÉ ÎÏ×ÙÈ ÐÒÏÇÒÁÍÍ.\n"
-"\n"
-"\n"
-"* òÅÖÉÍ üËÓÐÅÒÔ: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ×ÁÒÉÁÎÔ, ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ×ÒÕÞÎÕÀ ÒÁÚÂÉÔØ ×ÁÛ "
-"ÖÅÓÔËÉÊ ÄÉÓË. âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ\n"
-"  . üÔÏÔ ×ÁÒÉÁÎÔ ÏÞÅÎØ ÍÏÝÎÙÊ, ÎÏ ÏÞÅÎØ ÏÐÁÓÎÙÊ. ÷Ù ÍÏÖÅÔÅ ÌÅÇËÏ ÐÏÔÅÒÑÔØ "
-"×ÓÅ ×ÁÛÉ ÄÁÎÎÙÅ. ðÏÜÔÏÍÕ\n"
-"  ÎÅ ×ÙÂÉÒÁÊÔÅ ÜÔÏÔ ×ÁÒÉÁÎÔ, ÅÓÌÉ ×Ù ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÄÅÌÁÅÔÅ."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"þÔÏÂÙ ÉÓÐÏÌØÚÏ×ÁÔØ ×ÓÅ ÚÁÄÁÎÎÙÅ ÒÁÚÄÅÌÙ, ËÏÔÏÒÙÅ ÂÙÌÉ ÚÁÎÏ×Ï ÏÐÒÅÄÅÌÅÎÙ, "
-"ÏÎÉ \n"
-"ÄÏÌÖÎÙ ÂÙÔØ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÙ (ÆÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÏÚÎÁÞÁÅÔ ÓÏÚÄÁÎÉÅ ÆÁÊÌÏ×ÏÊ "
-"ÓÉÓÔÅÍÙ).\n"
-"\n"
-"\n"
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×Ù ÍÏÖÅÔÅ ÐÅÒÅÆÏÒÍÁÔÉÒÏ×ÁÔØ É ÕÖÅ ÓÕÝÅÓÔ×ÕÀÝÉÅ ÒÁÚÄÅÌÙ ÞÔÏÂÙ "
-"ÓÔÅÒÅÔØ\n"
-"ÓÏÄÅÒÖÁÝÕÀÓÑ ÎÁ ÎÉÈ ÉÎÆÏÒÍÁÃÉÀ. åÓÌÉ ×Ù ÈÏÔÉÔÅ ÜÔÏ ÓÄÅÌÁÔØ, ×ÙÂÅÒÉÔÅ ÔÁËÖÅ "
-"ÒÁÚÄÅÌÙ,\n"
-"ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÔØ.\n"
-"\n"
-"\n"
-"éÍÅÊÔÅ ××ÉÄÕ, ÞÔÏ ÎÅÏÂÑÚÁÔÅÌØÎÏ ÐÅÒÅÆÏÒÍÁÔÉÒÏ×ÁÔØ ×ÓÅ ÒÁÎÅÅ ÓÕÝÅÓÔ×ÕÀÝÉÅ "
-"ÒÁÚÄÅÌÙ.\n"
-"÷Ù ÄÏÌÖÎÙ ÐÅÒÅÆÏÒÍÁÔÉÒÏ×ÁÔØ ÒÁÚÄÅÌÙ, ÓÏÄÅÒÖÁÝÉÅ ÏÐÅÒÁÃÉÏÎÎÕÀ ÓÉÓÔÅÍÕ (ÔÁËÉÅ "
-"ËÁË \"/\",\n"
-"\"/usr\" ÉÌÉ \"/var\"), ÎÏ ×ÁÍ ÎÅÏÂÑÚÁÔÅÌØÎÏ ÜÔ ÏÄÅÌÁÔØ ÄÌÑ ÒÁÚÄÅÌÏ×, "
-"ÓÏÄÅÒÖÁÝÉÈ  ÉÎÆÏÒÍÁÃÉÀ,\n"
-"ËÏÔÏÒÕÀ ×Ù ÈÏÔÉÔÅ ÓÏÈÒÁÎÉÔØ (ÏÂÙÞÎÏ ÜÔÏ ÒÁÚÄÅÌ /home).\n"
-"\n"
-"\n"
-"âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ ÐÒÉ ×ÙÂÏÒÅ ÒÁÚÄÅÌÏ×, ÔÁË ËÁË ÐÏÓÌÅ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ×ÓÑ "
-"ÉÎÆÏÒÍÁÃÉÑ ÂÕÄÅÔ\n"
-"ÕÄÁÌÅÎÁ ÂÅÚ ×ÏÚÍÏÖÎÏÓÔÉ ×ÏÓÓÔÁÎÏ×ÌÅÎÉÑ.\n"
-"\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ \"OK\" ÄÌÑ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ÒÁÚÄÅÌÏ×.\n"
-"\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ \"ïÔÍÅÎÁ\", ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ×ÙÂÒÁÔØ ÄÒÕÇÉÅ ÒÁÚÄÅÌÙ ÄÌÑ ÕÓÔÁÎÏ×ËÉ \n"
-"Mandrake Linux."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÏÓÕÝÅÓÔ×ÌÑÅÔÓÑ ÕÓÔÁÎÏ×ËÁ ÷ÁÛÅÊ ÎÏ×ÏÊ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ "
-"Mandrake Linux\n"
-". üÔÁ ÏÐÅÒÁÃÉÑ ÚÁÊÍÅÔ ÎÅÓËÏÌØËÏ ÍÉÎÕÔ (×ÒÅÍÑ ÚÁ×ÉÓÉÔ ÏÔ ×ÙÂÒÁÎÎÏÇÏ ÒÁÚÍÅÒÁ "
-"ÕÓÔÁÎÏ×ËÉ\n"
-"É ÓËÏÒÏÓÔÉ ×ÁÛÅÇÏ ËÏÍÐØÀÔÅÒÁ).\n"
-"\n"
-"\n"
-"ÐÏÖÁÌÕÊÓÔÁ, ÐÏÄÏÖÄÉÔÅ."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"÷ ÜÔÏÍ ÐÕÎËÔÅ ×ÁÍ ÎÕÖÎÏ ×ÙÂÒÁÔØ, ËÁËÉÅ ÒÁÚÄÅÌ(Ù) \n"
-"ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ×ÁÛÅÊ ÎÏ×ÏÊ Mandrake Linux ÓÉÓÔÅÍÙ. åÓÌÉ ÒÁÚÄÅÌÙ\n"
-"ÕÖÅ ÓÏÚÄÁÎÙ (×Ï ×ÒÅÍÑ ÐÒÅÄÙÄÕÝÅÊ ÕÓÔÁÎÏ×ËÉ GNU/Linux ÉÌÉ ÄÒÕÇÏÊ\n"
-"ÐÒÏÇÒÁÍÍÏÊ ÒÁÚÂÉÅÎÉÑ), ×Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÓÕÝÅÓÔ×ÕÀÝÉÅ ÒÁÚÄÅÌÙ. ÷Ï ×ÓÅÈ "
-"ÄÒÕÇÉÈ ÓÌÕÞÁÑÈ,\n"
-"ÒÁÚÄÅÌÙ ÖÅÓÔËÏÇÏ ÄÉÓËÁ ÄÏÌÖÎÙ ÂÙÔØ ÚÁÄÁÎÙ.\n"
-"\n"
-"\n"
-"þÔÏÂÙ ÓÏÚÄÁÔØ ÒÁÚÄÅÌÙ, ÓÎÁÞÁÌÁ ×ÁÍ ÎÕÖÎÏ ×ÙÂÒÁÔØ ÖÅÓÔËÉÊ ÄÉÓË. ÷ÙÂÒÁÔØ ÄÉÓË "
-"ÄÌÑ \n"
-"ÒÁÚÂÉÅÎÉÑ ×Ù ÍÏÖÅÔÅ, ÎÁÖÁ× \"hda\" ÄÌÑ ÄÉÓËÁ ÎÁ ÐÅÒ×ÏÍ IDE ËÁÎÁÌÅ, \"hdb\" "
-"ÄÌÑ ÄÉÓËÁ\n"
-"ÎÁ ×ÔÏÒÏÍ IDE ËÁÎÁÌÅ, ÌÉÂÏ \"sda\" ÄÌÑ ÐÅÒ×ÏÇÏ SCSI ÄÉÓËÁ É ÔÁË ÄÁÌÅÅ.\n"
-"\n"
-"\n"
-"äÌÑ ÒÁÚÂÉÅÎÉÑ ×ÙÂÒÁÎÎÏÇÏ ÖÅÓÔËÏÇÏ ÄÉÓËÁ, ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ×ÁÒÉÁÎÔÙ:\n"
-"\n"
-"   * ïÞÉÓÔÉÔØ ×ÓÅ: ÜÔÏÔ ×ÁÒÉÁÎÔ ÕÄÁÌÑÅÔ ×ÓÅ ÒÁÚÄÅÌÙ, ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁ "
-"×ÙÂÒÁÎÎÏÍ ÖÅÓÔËÏÍ ÄÉÓËÅ.\n"
-"\n"
-"\n"
-"   * á×ÔÏÍÁÔÉÞÅÓËÏÅ ÒÁÚÍÅÝÅÎÉÅ: ÜÔÏ ×ÁÒÉÁÎÔ ÐÏÚ×ÏÌÑÅÔ Á×ÔÏÍÁÔÉÞÅÓËÉ ÓÏÚÄÁÔØ "
-"ÒÁÚÄÅÌÙ Ext2 É ÐÏÄËÁÞËÉ (swap) × Ó×ÏÂÏÄÎÏÍ (ÎÅÒÁÚÂÉÔÏÍ) ÐÒÏÓÔÒÁÎÓÔ×Å "
-"×ÁÛÅÇÏ \n"
-"     ÖÅÓÔËÏÇÏ ÄÉÓËÁ.\n"
-"\n"
-"\n"
-"   * ÷ÏÓÓÔÁÎÏ×ÉÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×: × ÜÔÏÍ ÐÕÎËÔÅ ×Ù ÍÏÖÅÔÅ ÐÏÐÙÔÁÔØÓÑ "
-"×ÏÓÓÔÁÎÏ×ÉÔØ ×ÁÛÕ  ÔÁÂÌÉÃÁ ÒÁÚÄÅÌÏ×, ÅÓÌÉ ÏÎÁ ÐÏ×ÒÅÖÄÅÎÁ. âÕÄØÔÅ\n"
-"     ÏÓÔÏÒÏÖÎÙ É ÐÏÍÎÉÔÅ, ÞÔÏ ÐÏÐÙÔËÁ ÍÏÖÅÔ ÚÁËÏÎÞÉÔØÓÑ ÎÅÕÄÁÞÎÏ.\n"
-"\n"
-"\n"
-"   * ïÔËÁÔ: ÜÔÏÔ ÐÕÎËÔ ×Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ ÏÔÍÅÎÙ ÓÄÅÌÁÎÎÙÈ ×ÁÍÉ "
-"ÉÚÍÅÎÅÎÉÊ.\n"
-"\n"
-"\n"
-"   * ðÅÒÅÚÁÇÒÕÚÉÔØ: ÜÔÏÔ ÐÕÎËÔ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÄÌÑ ÏÔÍÅÎÙ ×ÓÅÈ ÉÚÍÅÎÅÎÉÊ É "
-"ÚÁÇÒÕÚËÉ ×ÁÛÅÊ ÉÓÈÏÄÎÏÊ (ÐÅÒ×ÏÎÁÞÁÌØÎÏÊ) ÔÁÂÌÉÃÙ ÒÁÚÄÅÌÏ×\n"
-"\n"
-"\n"
-"   * íÁÓÔÅÒ: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ÐÕÎËÔ, ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÏÇÒÁÍÍÕ-"
-"ÍÁÓÔÅÒ ÄÌÑ ÒÁÚÂÉÅÎÉÑ ×ÁÛÅÇÏ ÖÅÓÔËÏÇÏ ÄÉÓËÁ. òÅËÏÍÅÎÄÕÅÔÓÑ, ÅÓÌÉ Õ ×ÁÓ\n"
-"     ÎÅÂÏÌØÛÏÊ ÏÐÙÔ × ÒÁÚÂÉÅÎÉÉ ÄÉÓËÏ× ÎÁ ÒÁÚÄÅÌÙ.\n"
-"\n"
-"\n"
-"   * ÷ÏÓÓÔÁÎÏ×ÉÔØÓÑ Ó ÄÉÓËÅÔÙ: ×ÙÂÒÁ× ÜÔÏÔ ÐÕÎËÔ, ×Ù ÍÏÖÅÔÅ ×ÏÓÓÔÁÎÏ×ÉÔØ "
-"ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×, ÅÓÌÉ ×Ù ÅÅ ÓÏÈÒÁÎÑÌÉ ×Ï ×ÒÅÍÑ\n"
-"     ÐÅÒÄÙÄÕÝÅÊ ÕÓÔÁÎÏ×ËÉ.\n"
-"\n"
-"\n"
-"   * óÏÈÒÁÎÉÔØ ÎÁ ÄÉÓËÅÔÕ: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ÐÕÎËÔ, ÞÔÏÂÙ ÓÏÈÒÁÎÉÔØ ÔÁÂÌÉÃÕ "
-"ÒÁÚÄÅÌÏ× ÎÁ ÄÉÓËÅÔÕ. üÔÏ ÄÁÓÔ  ×ÁÍ ×ÏÚÍÏÖÎÏÓÔØ ×ÏÓÓÔÁÎÏ×ÉÔØ ÅÅ ÐÏÚÖÅ\n"
-"     . îÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÔÓÑ ÉÓÐÏÌØÚÏ×ÁÔØ ÜÔÏÔ ÐÕÎËÔ\n"
-"\n"
-"\n"
-"   * ÷ÙÐÏÌÎÅÎÏ: ×ÙÂÅÒÉÔÅ ÜÔÏÔ ÐÕÎËÔ, ËÏÇÄÁ ×Ù ÚÁËÏÎÞÉÔÅ ÒÁÚÂÉÅÎÉÅ drive, "
-"ÞÔÏÂÙ ÓÏÈÒÁÎÉÔØ ÓÄÅÌÁÎÎÙÅ ÉÚÍÅÎÅÎÉÑ.\n"
-"\n"
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÐÅÒÅÊÔÉ Ë ×ÙÂÏÒÕ ÌÀÂÏÇÏ ÐÕÎËÔÁ Ó ËÌÁ×ÉÁÔÕÒÙ: ÐÅÒÅÈÏÄ ÍÅÖÄÕ "
-"ÒÁÚÄÅÌÁÍÉ ÏÓÕÝÅÓÔ×ÌÑÅÔÓÑ Ó ÐÏÍÏÝØÀ ËÌÁ×ÉÛ  Tab É ÓÔÒÅÌÏË ÷×ÅÒÈ/÷ÎÉÚ.\n"
-"\n"
-"\n"
-"ëÏÇÄÁ ÒÁÚÄÅÌ ×ÙÂÒÁÎ, ÷Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ:\n"
-"\n"
-"           * Ctrl-c ÄÌÑ ÓÏÚÄÁÎÉÑ ÎÏ×ÏÇÏ ÒÁÚÄÅÌÁ (ËÏÇÄÁ ×ÙÂÒÁÎ ÐÕÓÔÏÊ "
-"ÒÁÚÄÅÌ)\n"
-"\n"
-"           * Ctrl-d ÄÌÑ ÕÄÁÌÅÎÉÑ ÒÁÚÄÅÌÁ\n"
-"\n"
-"           * Ctrl-m ÄÌÑ ÚÁÄÁÎÉÑ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ\n"
-"           \n"
-"\n"
-"           \n"
-"åÓÌÉ ×Ù ×ÙÐÏÌÎÑÅÔÅ ÕÓÔÁÎÏ×ËÕ ÎÁ ËÏÍÐØÀÔÅÒÅ PPC, ×ÏÚÍÏÖÎÏ, ×Ù ÚÁÈÏÔÉÔÅ "
-"ÓÏÚÄÁÔØ ÎÅÂÏÌØÛÏÊ HFS 'bootstrap' ÒÁÚÄÅÌ ÎÅ ÍÅÎÅÅ 1MB ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÅÇÏ\n"
-"ÎÁÞÁÌØÎÙÍ ÚÁÇÒÕÚÞÉËÏÍ yaboot. åÓÌÉ ×Ù ÒÅÛÉÔÅ ÓÄÅÌÁÔØ ÒÁÚÄÅÌ ÎÅÍÎÏÇÏ ÂÏÌØÛÅ, "
-"ÎÁÐÒÉÍÅÒ 50MB, ×Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÜÔÏ ÍÅÓÔÏ ÄÌÑ \n"
-"ÈÒÁÎÅÎÉÑ ÑÄÒÁ É ÏÂÒÁÚÁ ramdisk ÄÌÑ ÓÌÕÞÁÅ× Á×ÁÒÉÊÎÏÊ ÚÁÇÒÕÚËÉ."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"îÁ ÷ÁÛÅÍ ÖÅÓÔËÏÍ ÄÉÓËÅ ÏÂÎÁÒÕÖÅÎÏ ÂÏÌÅÅ ÏÄÎÏÇÏ ÒÁÚÄÅÌÁ Microsoft Windows\n"
-". ÷ÙÂÅÒÉÔÅ ÒÁÚÄÅÌ, ÒÁÚÍÅÒ ËÏÔÏÒÏÇÏ ÷Ù ÈÏÔÉÔÅ ÉÚÍÅÎÉÔØ ÄÌÑ ÕÓÔÁÎÏ×ËÉ\n"
-"÷ÁÛÅÊ ÎÏ×ÏÊ ÏÐÅÒÁÃÉÏÎÎÏÊ ÓÉÓÔÅÍÙ Mandrake Linux.\n"
-"\n"
-"\n"
-"äÌÑ ÓÐÒÁ×ËÉ - ËÁÖÄÙÊ ÒÁÚÄÅÌ ÏÐÉÓÙ×ÁÅÔÓÑ ÓÌÅÄÕÀÝÉÍ ÏÂÒÁÚÏÍ: \"ÉÍÑ Linux\", "
-"\"ÉÍÑ\n"
-"Windows\" \"åÍËÏÓÔØ\".\n"
-"\n"
-"\"ÉÍÑ Linux\" ÏÐÉÓÙ×ÁÅÔÓÑ ÓÌÅÄÕÀÝÉÍ ÏÂÒÁÚÏÍ: \"ÔÉÐ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\", \"ÎÏÍÅÒ "
-"ÖÅÓÔËÏÇÏ ÄÉÓËÁ\",\n"
-"\"ÎÏÍÅÒ ÒÁÚÄÅÌÁ\" (ÎÁÐÒÉÍÅÒ, \"hda1\").\n"
-"\n"
-"\n"
-"\"ôÉÐ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\" - \"hd\", ÅÓÌÉ Õ ×ÁÓ ÖÅÓÔËÉÊ ÄÉÓË Ó IDE ÉÎÔÅÒÆÅÊÓÏÍ É "
-"- \"sd\"\n"
-"ÅÓÌÉ ÜÔÏ SCSI ÄÉÓË.\n"
-"\n"
-"\n"
-"\"îÏÍÅÒ ÖÅÓÔËÏÇÏ ÄÉÓËÁ\" ÜÔÏ ×ÓÅÇÄÁ ÂÕË×Á ÐÏÓÌÅ \"hd\" or \"sd\". äÌÑ "
-"ÖÅÓÔËÉÈ ÄÉÓËÏ× IDE:\n"
-"\n"
-"   * \"a\" ÏÚÎÁÞÁÅÔ \"master ÄÉÓË ÎÁ ÐÅÒ×ÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"b\" ÏÚÎÁÞÁÅÔ \"slave ÄÉÓË ÎÁ ÐÅÒ×ÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"c\" ÏÚÎÁÞÁÅÔ \"master ÄÉÓË ÎÁ ×ÔÏÒÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\",\n"
-"\n"
-"   * \"d\" ÏÚÎÁÞÁÅÔ \"slave ÄÉÓË ÎÁ ×ÔÏÒÏÍ IDE ËÏÎÔÒÏÌÌÅÒÅ\".\n"
-"\n"
-"\n"
-"äÌÑ ÖÅÓÔËÉÈ ÄÉÓËÏ× SCSI, \"a\" ÏÚÎÁÞÁÅÔ \"ÐÅÒ×ÙÊ ÄÉÓË\", \"b\" ÏÚÎÁÞÁÅÔ "
-"\"×ÔÏÒÏÊ ÄÉÓË\", É Ô.Ä.\n"
-"\n"
-"\n"
-"\"éÍÑ Windows\" - ÜÔÏ ÂÕË×Á, ÏÂÏÚÎÁÞÁÀÝÁÑ ×ÁÛ ÖÅÓÔËÉÊ ÄÉÓË × Windows (ÐÅÒ×ÙÊ "
-"ÄÉÓË \n"
-"ÉÌÉ ÒÁÚÄÅÌ ÎÁÚÙ×ÁÅÔÓÑ \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "ðÏÄÏÖÄÉÔÅ. ÷ÙÐÏÌÎÅÎÉÅ ÜÔÏÊ ÏÐÅÒÁÃÉÑ ÍÏÖÅÔ ÚÁÎÑÔØ ÎÅÓËÏÌØËÏ ÍÉÎÕÔ."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ \"õÓÔÁÎÏ×ËÁ\", ÅÓÌÉ Õ ×ÁÓ ÎÅ ÂÙÌÁ ÕÓÔÁÎÏ×ÌÅÎÁ "
-"ÐÒÅÄÙÄÕÝÁÑ ×ÅÒÓÉÑ Mandrake Linux\n"
-"ÉÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÎÅÓËÏÌØËÏ ÏÐÅÒÁÃÉÏÎÎÙÈ ÓÉÓÔÅÍ.\n"
-"\n"
-"\n"
-"ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ \"ïÂÎÏ×ÌÅÎÉÅ\", ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÏÂÎÏ×ÉÔØ ÕÖÅ "
-"ÕÓÔÁÎÏ×ÌÅÎÎÕÀ ×ÅÒÓÉÀ  Mandrake Linux.\n"
-"\n"
-"\n"
-"÷ ÚÁ×ÉÓÉÍÏÓÔÉ ÏÔ ×ÁÛÅÇÏ ÏÐÙÔÁ × GNU/Linux, ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÏÄÉÎ ÉÚ "
-"ÓÌÅÄÕÀÝÉÈ ÕÒÏ×ÎÅÊ ÕÓÔÁÎÏ×ËÉ ÉÌÉ ÏÂÎÏ×ÌÅÎÉÑ ×ÁÛÅÊ\n"
-"ÏÐÅÒÁÃÉÏÎÎÎÏÊ ÓÉÓÔÅÍÙ Mandrake Linux:\n"
-"\n"
-"* òÅËÏÍÅÎÄÕÅÍÙÊ: ÅÓÌÉ ×Ù ÒÁÎÅÅ ÎÉËÏÇÄÁ ÎÅ ÕÓÔÁÎÁ×ÌÉ×ÁÌÉ ÏÐÅÒÁÃÉÏÎÎÙÈ ÓÉÓÔÅÍ "
-"GNU/Linux ×ÙÂÅÒÉÔÅ ÜÔÏÔ. õÓÔÁÎÏ×ËÁ ÂÕÄÅÔ\n"
-"  ÏÞÅÎØ ÐÒÏÓÔÏÊ É ×ÁÍ ÂÕÄÅÔ ÚÁÄÁÎÏ ×ÓÅÇÏ ÎÅÓËÏÌØËÏ ×ÏÐÒÏÓÏ×.\n"
-"\n"
-"\n"
-"* ÷ÙÂÏÒÏÞÎÙÊ: ÅÓÌÉ ×Ù ÄÏÓÔÁÔÏÞÎÏ ÚÎÁËÏÍÙ Ó GNU/Linux, ÔÏ ÍÏÖÅÔÅ ×ÙÂÒÁÔØ "
-"ÃÅÌÅ×ÏÅ ÎÁÚÎÁÞÅÎÉÅ (ÒÁÂÏÞÁÑ ÓÔÁÎÃÉÑ, ÓÅÒ×ÅÒ,\n"
-"  ÒÁÚÒÁÂÏÔËÁ ÐÒÏÇÒÁÍÍ) ×ÁÛÅÊ ÓÉÓÔÅÍÙ. ÷ÁÍ ÂÕÄÅÔ ÚÁÄÁÎÏ ÂÏÌØÛÅ ×ÏÐÒÏÓÏ×, ÞÅÍ "
-"× ×ÁÒÉÁÎÔÅ ÕÓÔÁÎÏ×ËÉ \"òÅËÏÍÅÎÄÕÅÔÓÑ\" \n"
-"  ÕÒÏ×ÅÎØ, ÐÏÜÔÏÍÕ ×ÁÍ ÎÕÖÎÏ ÚÎÁÔØ, ËÁË ÒÁÂÏÔÁÅÔ GNU/Linux ÞÔÏÂÙ ×ÙÂÒÁÔØ "
-"ÜÔÏÔ ÕÒÏ×ÅÎØ ÕÓÔÁÎÏ×ËÉ.\n"
-"\n"
-"\n"
-"* üËÓÐÅÒÔ: ÅÓÌÉ ×Ù ÏÂÌÁÄÁÅÔÅ ÈÏÒÏÛÉÍÉ ÚÎÁÎÉÑÍÉ × GNU/Linux, ×Ù ÍÏÖÅÔÅ "
-"×ÙÂÒÁÔØ ÜÔÏÔ ÕÒÏ×ÅÎØ ÕÓÔÁÎÏ×ËÉ. ëÁË É × ÕÒÏ×ÎÅ \"÷ÙÂÏÒÏÞÎÁÑ\",\n"
-"  ×Ù ÓÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÃÅÌÅ×ÏÅ ÎÁÚÎÁÞÅÎÉÅ (ÒÁÂÏÞÁÑ ÓÔÁÎÃÉÑ, ÓÅÒ×ÅÒ, ÒÁÚÒÁÂÏÔËÁ "
-"ÐÒÏÇÒÁÍÍ). âÕÄØÔÅ ÏÞÅÎØ\n"
-"  ÏÓÔÏÒÏÖÎÙ × ×ÙÂÏÒÅ ÜÔÏÇÏ ÕÒÏ×ÎÑ ÕÓÔÁÎÏ×ËÉ. ÷ ÎÅÍ ×Ù ÍÏÖÅÔÅ ÏÓÕÝÅÓÔ×ÉÔØ "
-"ÏÞÅÎØ ÔÏÎËÕÀ ÎÁÓÔÒÏÊËÕ ÐÒÏÃÅÓÓÁ ÕÓÔÁÎÏ×ËÉ.\n"
-"  ïÔ×ÅÔÉÔØ ÎÁ ÎÅËÏÔÏÒÙÅ ×ÏÐÒÏÓÙ, ÎÅ ÏÂÌÁÄÁÑ ÈÏÒÏÛÉÍÉ ÚÎÁÎÉÑÍÉ × GNU/Linux, "
-"ÍÏÖÅÔ ÂÙÔØ ÏÞÅÎØ ÔÒÕÄÎÏ.  ðÏÜÔÏÍÕ ÎÅ ×ÙÂÉÒÁÊÔÅ ÜÔÏÔ ÕÒÏ×ÅÎØ ÕÓÔÁÎÏ×ËÉ,\n"
-" ÅÓÌÉ ×Ù ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÄÅÌÁÅÔÅ."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"÷ÙÅÂÒÉÔÅ ÐÒÁ×ÉÌØÎÙÊ ÐÏÒÔ. îÁÐÒÉÍÅÒ, COM1\n"
-"ÐÏÒÔ × MS Windows ÎÁÚÙ×ÁÅÔÓÑ ttyS0 × GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader - ÚÁÇÒÕÚÞÉË Linux) É Grub Ñ×ÌÑÀÔÓÑ ÄÉÓÐÅÔÞÅÒÁÍÉ "
-"ÚÁÇÒÕÚËÉ:\n"
-"ÏÎÉ ÓÐÏÓÏÂÎÙ ÚÁÇÒÕÚÉÔØ GNU/Linux ÉÌÉ ÌÀÂÕÀ ÄÒÕÇÕÀ ïó, ÕÓÔÁÎÏ×ÌÅÎÎÕÀ ÎÁ "
-"ÍÁÛÉÎÅ.\n"
-"ïÂÙÞÎÏ ÜÔÉ ÄÒÕÇÉÅ ÏÐÅÒÁÃÉÏÎÎÙÅ ÓÉÓÔÅÍÙ ËÏÒÒÅËÔÎÏ ÒÁÓÐÏÚÎÁÀÔÓÑ É "
-"ÕÓÔÁÎÁ×ÌÉ×ÁÀÔÓÑ.\n"
-"åÓÌÉ ÜÔÏÇÏ ÎÅ ÐÒÏÉÚÏÛÌÏ, ×Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÐÕÎËÔ ×ÒÕÞÎÕÀ ÎÁ ÜÔÏÍ ÜËÒÁÎÅ.\n"
-"âÕÄØÔÅ ×ÎÉÍÁÔÅÌØÎÙ ÐÒÉ ÚÁÄÁÎÉÉ ÐÁÒÁÍÅÔÒÏ×.\n"
-"\n"
-"\n"
-"÷ÏÚÍÏÖÎÏ ÔÁËÖÅ, ÞÔÏ ×Ù ÎÅ ÈÏÔÉÔÅ ÎÉËÏÍÕ ÄÁ×ÁÔØ ÄÏÓÔÕÐ Ë ÜÔÉÍ ïó, × ÔÁËÏÍ "
-"ÓÌÕÞÁÅ\n"
-"ÍÏÖÎÏ ÕÄÁÌÉÔØ ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÉÅ ÐÕÎËÔÙ. îÏ × ÜÔÏÍ ÓÌÕÞÁÅ ÄÌÑ ÉÈ ÚÁÇÒÕÚËÉ "
-"ÐÏÔÒÅÂÕÅÔÓÑ\n"
-"ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"îÁÄÏ ÕËÁÚÁÔØ, ËÕÄÁ ×Ù ÈÏÔÉÔÅ\n"
-"ÐÏÍÅÓÔÉÔØ ÉÎÆÏÒÍÁÃÉÀ, ÎÅÏÂÈÏÄÉÍÕÀ ÄÌÑ ÚÁÇÒÕÚËÉ GNU/Linux.\n"
-"\n"
-"\n"
-"åÓÌÉ ×Ù ÎÅ ÐÏÎÉÍÁÅÔÅ ÁÂÓÏÌÀÔÎÏ ÔÏÞÎÏ ÔÏ, ÞÔÏ ×Ù ÄÅÌÁÅÔÅ, ×ÙÂÉÒÁÊÔÅ\n"
-"\"ðÅÒ×ÙÊ ÓÅËÔÏÒ ÎÁ ÄÉÓËÅ (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ÐÏÐÒÏÂÕÅÔ ÏÐÒÅÄÅÌÉÔØ PCI SCSI ÁÄÁÐÔÅÒ(Ù). åÓÌÉ DrakX\n"
-"ÓÍÏÖÅÔ ÏÐÒÅÄÅÌÉÔØ SCSI ÁÄÁÐÔÅÒ É Õ ÎÅÇÏ ÂÕÄÅÔ ÓÏÏÔ×ÅÔÓ×ÕÀÝÉÊ ÄÒÁÊ×ÅÒ, ÔÏ ÏÎ "
-"ÂÕÄÅÔ Á×ÔÏÍÁÔÉÞÅÓËÉ \n"
-"ÕÓÔÁÎÏ×ÌÅÎ.\n"
-"\n"
-"\n"
-"åÓÌÉ DrakX ÎÅ ÎÁÊÄÅÔ ÎÉ ÏÄÎÏÇÏ SCSI ÁÄÁÐÔÅÒÁ, ISA SCSI ÁÄÁÐÔÅÒÁ ÉÌÉ PCI SCSI "
-"ÁÄÁÐÔÅÒÁ, \n"
-"ÔÏÇÄÁ ×ÁÍ ÂÕÄÅÔ ÚÁÄÁÎ ×ÏÐÒÏÓ Ï ÎÁÌÉÞÉÉ SCSI ÁÄÁÐÔÅÒÁ × ×ÁÛÅÊ \n"
-"ÓÉÓÔÅÍÅ. åÓÌÉ ÁÄÁÐÔÅÒÏ× ÎÅÔ, ×Ù ÍÏÖÅÔÅ ÎÁÖÁÔØ \"îÅÔ\". åÓÌÉ ×Ù ÎÁÖÍÅÔÅ\n"
-"\"äÁ\", ÔÏ ×ÁÍ ÂÕÄÅÔ ÐÒÅÄÌÏÖÅÎ ÓÐÉÓÏË ÁÄÁÐÔÅÒÏ×, ÉÚ ËÏÔÏÒÙÈ ×Ù ÓÍÏÖÅÔÅ "
-"×ÙÂÒÁÔØ ÉÍÅÎÎÏ ×ÁÛ.\n"
-"\n"
-"\n"
-"\n"
-"åÓÌÉ ×Ù ×ÒÕÞÎÕÀ ÕËÁÖÉÔÅ ×ÁÛ ÁÄÁÐÔÅÒ, DrakX ÓÐÒÏÓÉÔ ×ÁÓ, ÈÏÔÉÔÅ ÌÉ ×Ù \n"
-"ÕËÁÚÁÔØ ÄÌÑ ÎÅÇÏ ÐÁÒÁÍÅÔÒÙ. ÷Ù ÄÏÌÖÎÙ ÐÏÚ×ÏÌÉÔØ DrakX ÏÐÒÅÄÅÌÉÔØ ÎÁÓÔÒÏÊËÉ "
-"ÜÔÏÇÏ \n"
-"ÕÓÔÒÏÊÓÔ×Á. ïÂÙÞÎÏ ÜÔÏ ÒÁÂÏÔÁÅÔ ÈÏÒÏÛÏ.\n"
-"\n"
-"\n"
-"åÓÌÉ ÎÅÔ, ×ÁÍ ÐÉÄÅÔÓÑ ÕËÁÚÁÔØ ÎÁÓÔÒÏÊËÉ ÄÒÁÊ×ÅÒÁ. ðÏÖÁÌÕÊÓÔÁ, ÐÒÏÓÍÏÔÒÉÔÅ "
-"òÕËÏ×ÏÄÓÔ×Ï\n"
-"ðÏÌØÚÏ×ÁÔÅÌÑ (ÇÌÁ×Á 3, ÒÁÚÄÅÌ \"Collective informations on your hardware\") "
-"for hints\n"
-"ÉÌÉ ÎÁÊÄÉÔÅ ÜÔÕ ÉÎÆÏÒÍÁÃÉÀ × ÏÐÉÓÁÎÉÉ ÏÂÏÒÕÄÏ×ÁÎÉÑ × ÄÏËÕÍÅÎÔÁÃÉÉ\n"
-"ÎÁ web ÓÁÊÔÅ ÐÒÏÉÚ×ÏÄÉÔÅÌÑ (ÅÓÌÉ Õ ×ÁÓ ÅÓÔØ ÄÏÓÔÕÐ × ÉÎÔÅÒÎÅÔ) ÉÌÉ "
-"ÐÏÓÍÏÔÒÉÔÅ ÎÁÓÔÒÏÊËÉ × Microsoft Windows\n"
-"(ÅÓÌÉ ÏÎ ÕÓÔÁÎÏ×ÌÅÎ ÎÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"÷Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÄÏÐÏÌÎÉÔÅÌØÎÙÅ ÚÁÐÉÓÉ ÄÌÑ yaboot, ÌÉÂÏ ÄÌÑ ÄÒÕÇÉÈ "
-"ÏÐÅÒÁÃÉÏÎÎÙÈ ÓÉÓÔÅÍ,\n"
-"ÌÉÂÏ ÄÌÑ ÄÒÕÇÉÈ ÑÄÅÒ, ÌÉÂÏ ÄÌÑ Á×ÁÒÉÊÎÏÇÏ ÚÁÇÒÕÚÏÞÎÏÇÏ ÏÂÒÁÚÁ.\n"
-"\n"
-"\n"
-"äÌÑ ÄÒÕÇÉÈ ïó - ÚÁÐÉÓØ ÓÏÄÅÒÖÉÔ ÔÏÌØËÏ ÍÅÔËÕ É ËÏÒÎÅ×ÏÊ ÒÁÚÄÅÌ.\n"
-"\n"
-"\n"
-"äÌÑ Linux, ×ÏÚÍÏÖÎÙ ÎÅÓËÏÌØËÏ ÐÁÒÁÍÅÔÒÏ×: \n"
-"\n"
-"\n"
-"  - íÅÔËÁ: üÔÏ ÐÒÏÓÔÏ ÉÍÑ, ËÏÔÏÒÏÅ ÂÕÄÅÔ ×Ù×ÏÄÉÔØÓÑ × ÐÒÉÇÌÁÛÅÎÉÉ yaboot ÄÌÑ "
-"×ÙÂÏÒÁ ÜÔÏÇÏ \n"
-"×ÁÒÉÁÎÔÁ ÚÁÇÒÕÚËÉ.\n"
-"\n"
-"\n"
-"  - ïÂÒÁÚ: üÔÏ ÂÕÄÅÔ ÉÍÑ ÚÁÇÒÕÖÁÅÍÏÇÏ ÑÄÒÁ.  ïÂÙÞÎÏ ÜÔÏ vmlinux ÉÌÉ \n"
-"×ÁÒÉÁÎÔ vmlinux ÐÌÀÓ ÒÁÓÛÉÒÅÎÉÅ.\n"
-"\n"
-"\n"
-"  - Root: ëÏÒÎÅ×ÏÅ ÕÓÔÒÏÊÓÔ×Ï ÉÌÉ '/' ÄÌÑ ÕÓÔÁÎÏ×ËÉ Linux.\n"
-"\n"
-"\n"
-"  \n"
-"  - äÏÐÏÌÎÉÔØ: ÷ ÏÂÏÒÕÄÏ×ÁÎÉÉ Apple, ÄÏÐÏÌÎÅÎÉÅ ÑÄÒÁ ÞÁÓÔÏ ÉÓÐÏÌØÚÕÅÔÓÑ "
-"ÞÔÏÂÙ\n"
-"ÏÂÅÓÐÅÞÉÔØ ÚÁÐÕÓË ×ÉÄÅÏ ÐÏÄÓÉÓÔÅÍÙ, ÌÉÂÏ ÄÌÑ ÜÍÕÌÑÃÉÉ ÎÁ ËÌÁ×ÉÁÔÕÒÅ ËÎÏÐÏË "
-"ÍÙÛÉ ÔÁË ËÁË\n"
-"2ÁÑ É 3ÑÑ ËÎÏÐËÁ ÏÔÓÕÔÓ×ÕÀÔ ÎÁ ÏÂÙÞÎÙÈ Apple ÍÙÛÁÈ. ÷ÏÔ ÎÅÓËÏÌØËÏ \n"
-"ÐÒÉÍÅÒÏ×:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: üÔÏÔ ÐÁÒÁÍÅÔÒ ÍÏÖÅÔ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÌÉÂÏ ÄÌÑ ÚÁÇÒÕÚËÉ "
-"ÐÅÒ×ÏÎÁÞÁÌØÎÙÈ ÍÏÄÕÌÅÊ ÄÏ ÔÏÇÏ, ËÁË ÚÁÇÒÕÚÏÞÎÏÅ \n"
-"ÕÓÔÒÏÊÓÔ×Ï ÓÔÁÎÅÔ ÄÏÓÔÕÐÎÙÍ, ÌÉÂÏ ÄÌÑ ÚÁÇÒÕÚËÉ ÏÂÒÁÚÁ ramdisk ÐÒÉ ÚÁÇÒÕÚËÅ × "
-"Á×ÁÒÉÊÎÏÊ ÓÉÔÕÁÃÉÉ.\n"
-"\n"
-"\n"
-"  - òÁÚÍÅÒ Initrd: ðÏ ÕÍÏÌÞÁÎÉÀ ÒÁÚÍÅÒ ramdisk ÏÂÙÞÎÏ 4096 ÂÁÊÔ. åÓÌÉ ×ÁÍ "
-"ÐÏÔÒÅÂÕÅÔÓÑ\n"
-"ÒÁÚÍÅÓÔÉÔØ ÂïÌØÛÉÊ ramdisk, ÔÏ ÔÏÇÄÁ ÉÓÐÏÌØÚÕÅÔÓÑ ÜÔÏÔ ÐÁÒÁÍÅÔÒ.\n"
-"\n"
-"\n"
-"  - þÔÅÎÉÅ-ÚÁÐÉÓØ: ÏÂÙÞÎÏ 'ËÏÒÎÅ×ÏÊ' ('root') ÒÁÚÄÅÌ ÐÅÒ×ÏÎÁÞÁÌØÎÏ "
-"ÐÏÄËÌÀÞÁÅÔÓÑ × ÒÅÖÉÍÅ ÔÏÌØËÏ-ÞÔÅÎÉÅ, ÞÔÏÂÙ ÐÏÚ×ÏÌÉÔØ\n"
-"ÐÒÏ×ÅÒËÕ ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ ÐÅÒÅÄ ÐÅÒÅÈÏÄÏÍ ÓÉÓÔÅÍÙ × 'ÒÁÂÏÞÅÅ' ÓÏÓÔÏÑÎÉÅ. ÷ "
-"ÜÔÏÍ ÐÁÒÁÍÅÔÒÅ ×Ù ÍÏÖÅÔÅ ÜÔÏ ÉÚÍÅÎÉÔØ.\n"
-"\n"
-"\n"
-"  - NoVideo: åÓÌÉ ÒÁÂÏÔÁ ×ÉÄÅÏ ÐÏÄÓÉÓÔÅÍÙ Apple ÂÕÄÅÔ ÁÂÓÏÌÀÔÎÏ "
-"ÎÅÕÓÔÏÊÞÉ×ÏÊ, ÔÏ ×Ù ÍÏÖÅÔÅ\n"
-"×ÙÂÒÁÔØ ÜÔÏÔ ÐÁÒÁÍÅÔÒ ÄÌÑ ÚÁÇÒÕÚËÉ × ÒÅÖÉÍÅ 'novideo', Ó ÐÏÄÄÅÒÖËÏÊ ÒÏÄÎÏÇÏ "
-"framebuffer .\n"
-"\n"
-"\n"
-"  - ðÏ ÕÍÏÌÞÁÎÉÀ: ÷ÙÂÉÒÁÅÔ ÜÔÏÔ ×ÁÒÉÁÎÔ ËÁË ×ÙÂÏÒ Linux, ÕÓÔÁÎÏ×ÌÅÎÎÙÊ ÐÏ "
-"ÕÍÏÌÞÁÎÉÀ. üÔÏ ×ÙÐÏÌÎÑÅÔÓÑ ÐÒÏÓÔÙÍ\n"
-"ÎÁÖÁÔÉÅÍ ENTER ÎÁ ÐÒÉÇÌÁÛÅÎÉÅ yaboot. üÔÏÔ ×ÁÒÉÁÎÔ ÂÕÄÅÔ ÔÁËÖÅ ×ÙÄÅÌÅÎ "
-"ÓÉÍ×ÏÌÏÍ '*', ÅÓÌÉ ×Ù ÎÁÖÍÅÔÅ\n"
-"TAB ÄÌÑ ÐÒÏÓÔÍÏÔÒÁ ×ÁÒÉÁÎÔÏ× ÚÁÇÒÕÚËÉ."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot - ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË ÄÌÑ ÏÂÏÒÕÄÏ×ÁÎÉÑ NewWorld MacIntosh. ïÎ ÍÏÖÅÔ \n"
-"ÚÁÇÒÕÖÁÔØ ÌÉÂÏ GNU/Linux, ÌÉÂÏ MacOS ÉÌÉ MacOSX, ÅÓÌÉ ÏÎÉ ÅÓÔØ ÎÁ ×ÁÛÅÍ "
-"ËÏÍÐØÀÔÅÒÅ.\n"
-"ïÂÙÞÎÏ ÏÐÅÒÁÃÉÏÎÎÙÅ ÓÉÓÔÅÍÙ ÏÐÒÅÄÅÌÑÀÔÓÑ É ÕÓÔÁÎÁ×ÌÉ×ÁÀÔÓÑ ËÏÒÒÅËÔÎÏ.\n"
-"åÓÌÉ ÜÔÏÇÏ ÎÅ ÐÒÏÉÚÏÛÌÏ, ×Ù ÍÏÖÅÔÅ ×ÒÕÞÎÕÀ ÄÏÂÁ×ÉÔØ ÚÁÐÉÓØ\n"
-"× ÜÔÏÍ ÜËÒÁÎÅ. âÕÄØÔÅ ÁËËÕÒÁÔÎÙ ÐÒÉ ×ÙÂÏÒÅ ÐÁÒÁÍÅÔÒÏ×.\n"
-"\n"
-"\n"
-"ïÓÎÏ×ÎÙÅ ÐÁÒÁÍÅÔÒÙ Yaboot:\n"
-"\n"
-"\n"
-"  - éÓÈÏÄÎÏÅ ÓÏÏÂÝÅÎÉÅ: ðÒÏÓÔÏÅ ÔÅÓÔËÏ×ÏÅ ÓÏÏÂÝÅÎÉÅ, ËÏÔÏÒÏÅ ÐÏËÁÚÙ×ÁÅÔÓÑ "
-"ÐÅÒÅÄ ÐÒÉÇÌÁÛÅÎÉÅÍ\n"
-"ÚÁÇÒÕÚÞÉËÁ.\n"
-"\n"
-"\n"
-"  - úÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï: õËÁÚÙ×ÁÅÔ ÍÅÓÔÏ, × ËÏÔÏÒÏÅ ×Ù ÈÏÔÉÔÅ ÐÏÍÅÓÔÉÔØ "
-"ÉÎÆÏÒÍÁÃÉÀ, ÔÒÅÂÕÀÝÕÀÓÑ ÄÌÑ \n"
-"ÚÁÇÒÕÚËÉ GNU/Linux. ïÂÙÞÎÏ Ë ÜÔÏÍÕ ×Ù ÕÖÅ ÎÁÓÔÒÁÉ×ÁÅÔÅ ÒÁÚÄÅÌ bootstrap, "
-"ÄÌÑ \n"
-"ÈÒÁÎÅÎÉÑ ÜÔÏÊ ÉÎÆÏÍÁÒÃÉÉ.\n"
-"\n"
-"\n"
-"  - úÁÇÒÕÚËÁ ÏÔËÒÙÔÉÑ Firmware: ÷ ÏÔÌÉÞÉÉ ÏÔ LILO, × yaboot ÉÍÅÅÔÓÑ 2 "
-"ÚÁÄÅÒÖËÉ  \n"
-".  ðÅÒ×ÁÑ ÚÁÄÅÒÖËÁ ÉÚÍÅÒÑÅÔÓÑ × ÓÅËÕÎÄÁÈ É ÎÁ ÜÔÏÍ ÜÔÁÐÅ ×Ù ÍÏÖÅÔÅ "
-"×ÙÂÉÒÁÔØ \n"
-"ÍÅÖÄÕ CD, OF ÚÁÇÒÕÚËÏÊ, MacOS ÉÌÉ Linux.\n"
-"\n"
-"\n"
-"  - úÁÄÅÒÖËÁ ÚÁÇÒÕÚËÉ ÑÄÒÁ: üÔÁ ÚÁÄÅÒÖËÁ ÓÈÏÄÎÁ Ó ÚÁÄÅÒÖËÏÊ ÚÁÇÒÕÚËÉ LILO.  "
-"ðÏÓÌÅ \n"
-"×ÙÂÏÒÁ Linux, Õ ×ÁÓ ÂÕÄÅÔ ÚÁÄÅÒÖËÁ × 0.1 ÓÅËÕÎÄÙ, ÐÒÅÖÄÅ ÞÅÍ ×ÁÛÅ\n"
-"ÑÄÒÏ ÐÏ ÕÍÏÌÞÁÎÉÀ ÂÕÄÅÔ ×ÙÂÒÁÎÏ.\n"
-"\n"
-"\n"
-"  - ÷ËÌÀÞÉÔØ ÚÁÇÒÕÚËÕ Ó CD?: ×ÙÂÏÒ ÜÔÏÇÏ ÐÁÒÍÁÅÔÒÁ ÐÏÚ×ÏÌÉÔ ÎÁÖÉÍÁÔØ 'C' ÄÌÑ "
-"ÚÁÇÒÕÚËÉ Ó CD ×\n"
-"ÐÅÒ×ÏÍ ÐÒÉÇÌÁÛÅÎÉÉ ÚÁÇÒÕÚÞÉËÁ.\n"
-"\n"
-"\n"
-"  - ÷ËÌÀÞÉÔØ ÚÁÇÒÕÚËÕ OF?: ×ÙÂÏÒ ÜÔÏÇÏ ÐÁÒÁÍÅÔÒÁ ÐÏÚ×ÏÌÉÔ ×ÁÍ ÎÁÖÉÍÁÔØ 'N' "
-"ÄÌÑ Open\n"
-"Firmware × ÐÅÒ×ÏÍ ÐÒÉÇÌÁÛÅÎÉÉ ÚÁÇÒÕÚÞÉËÁ.\n"
-"\n"
-"\n"
-"  - ïó ÐÏ ÕÍÏÌÞÁÎÉÀ: ÷Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ, ËÁËÁÑ ïó ÂÕÄÅÔ ÚÁÇÒÕÖÁÔØÓÑ ÐÏ "
-"ÕÍÏÌÞÁÎÉÀ ÐÏÓÌÅ ÉÓÔÅÞÅÎÉÑ ×ÒÅÍÅÎÉ ÚÁÄÅÒÖËÉ \n"
-"Firmware."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"÷ÙÂÅÒÉÔÅ ÖÅÓÔËÉÊ ÄÉÓË, ËÏÔÏÒÙÊ ×Ù ÈÏÔÉÔÅ ÏÞÉÓÔÉÔØ ÄÌÑ ÕÓÔÁÎÏ×ËÉ\n"
-"ÎÏ×ÏÇÏ ÒÁÚÄÅÌÁ Mandrake Linux. âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ, ×ÓÅ ÄÁÎÎÙÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ "
-"ÂÅÚ ×ÏÚÍÏÖÎÏÓÔÉ\n"
-"×ÏÓÓÔÁÎÏ×ÌÅÎÉÑ."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"îÁÖÍÉÔÅ ÎÁ \"OK\" ÅÓÌÉ ÷Ù ÈÏÔÉÔÅ ÕÄÁÌÉÔØ ×ÓÅ ÄÁÎÎÙÅ É\n"
-"ÒÁÚÄÅÌÙ, ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁ ÜÔÏÍ ÖÅÓÔËÏÍ ÄÉÓËÅ. âÕÄØÔÅ ÏÓÔÏÒÏÖÎÙ, ÐÏÓÌÅ ÎÁÖÁÔÉÑ "
-"ÎÁ \"OK\", ÷Ù\n"
-"ÎÅ ÓÍÏÖÅÔÅ ×ÏÓÓÔÁÎÏ×ÉÔØ ÎÉËÁËÕÀ ÉÎÆÏÒÍÁÃÉÀ É ÒÁÚÄÅÌÙ, ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁ ÜÔÏÍ "
-"ÖÅÓÔËÏÍ ÄÉÓËÅ,\n"
-"×ËÌÀÞÁÑ ×ÓÀ ÉÎÆÏÒÍÁÃÉÀ Windows.\n"
-"\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ \"ïÔÍÅÎÁ\" ÄÌÑ ÏÔÍÅÎÙ ÜÔÏÊ ÏÐÅÒÁÃÉÉ ÂÅÚ ÐÏÔÅÒÉ ÄÁÎÎÙÈ É "
-"ÒÁÚÄÅÌÏ× \n"
-"ÎÁ ÜÔÏÍ ÖÅÓÔËÏÍ ÄÉÓËÅ."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"÷Ù ×ÙÂÒÁÌÉ ÓÌÅÄÕÀÝÉÊ ÓÅÒ×ÅÒ(Á): %s\n"
-"\n"
-"\n"
-"üÔÉ ÓÅÒ×ÅÒÁ ÂÕÄÕÔ ÚÁÐÕÝÅÎÙ ÐÏ ÕÍÏÌÞÁÎÉÀ. ÷ ÎÉÈ ÎÅ ÏÂÎÁÒÕÖÅÎÏ ÐÒÏÂÌÅÍ Ó "
-"ÂÅÚÏÐÁÓÎÏÓÔØÀ\n"
-", ÎÏ, ×ÏÚÍÏÖÎÏ, ÎÅÓËÏÌØËÏ ÎÏ×ÙÈ ÐÒÏÂÌÅÍ ÂÕÄÕÔ ÏÂÎÁÒÕÖÅÎÙ. ÷ ÜÔÏÍ ÓÌÕÞÁÅ ×ÁÍ "
-"ÓÌÅÄÕÅÔ ÏÂÎÏ×ÉÔØ ÉÈ ÎÅÍÅÄÌÅÎÎÏ\n"
-".\n"
-"\n"
-"\n"
-"÷Ù Õ×ÅÒÅÎÙ, ÞÔÏ ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÜÔÉ ÓÅÒ×ÅÒÁ?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "îÅ×ÏÚÍÏÖÎÏ ÉÓÐÏÌØÚÏ×ÁÔØ broadcast ÂÅÚ NIS ÄÏÍÅÎÁ"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÎÕÀ ÐÏÄ FAT ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "üÔÁ ÄÉÓËÅÔÁ ÎÅ ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÁ ÐÏÄ FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"þÔÏÂÙ ÉÓÐÏÌØÚÏ×ÁÔØ ÓÏÈÒÁÎÅÎÎÙÊ ×ÙÂÏÒ ÐÁËÅÔÏ×, ÚÁÐÕÓÔÉÔÅ ÕÓÔÁÎÏ×ËÕ Ó "
-"ÐÁÒÁÍÅÔÒÏÍ, ÎÁÐÒÉÍÅÒ ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "ïÛÉÂËÁ ÞÔÅÎÉÑ ÆÁÊÌÁ %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"îÅËÏÔÏÒÙÅ ÕÓÔÒÏÊÓÔ×Á ÎÁ ×ÁÛÅÍ ËÏÍÐØÀÔÅÒÅ ÄÌÑ ÒÁÂÏÔÙ ÎÕÖÄÁÀÔÓÑ × ``ÒÏÄÎÙÈ'' "
-"ÄÒÁÊ×ÅÒÁÈ.\n"
-"÷Ù ÍÏÖÅÔÅ ÎÁÊÔÉ ÉÎÆÏÒÍÁÃÉÀ Ï ÎÉÈ ÎÁ: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ËÏÒÎÅ×ÏÊ ÒÁÚÄÅÌ.\n"
-"äÌÑ ÜÔÏÇÏ ÓÏÚÄÁÊÔÅ ÒÁÚÄÅÌ (ÉÌÉ ÕËÁÖÉÔÅ ÕÖÅ ÓÕÝÅÓÔ×ÕÀÝÉÊ).\n"
-"úÁÔÅÍ ×ÙÂÅÒÉÔÅ ``ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ'' É ÕÓÔÁÎÏ×ÉÔÅ ÅÅ × `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÒÁÚÄÅÌ swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"õ ×ÁÓ ÎÅÔ ÒÁÚÄÅÌÁ swap\n"
-"\n"
-"÷ÓÅ-ÔÁËÉ ÐÒÏÄÏÌÖÉÔØ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÒÁÚÄÅÌ swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ Ó×ÏÂÏÄÎÏÅ ÍÅÓÔÏ"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ Ó×ÏÂÏÄÎÏÇÏ ÍÅÓÔÁ ÄÌÑ ÒÁÚÍÅÝÅÎÉÑ ÎÏ×ÙÈ ÒÁÚÄÅÌÏ×"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÓÕÝÅÓÔ×ÕÀÝÉÊ ÒÁÚÄÅÌ"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "îÅÔ ÓÕÝÅÓÔ×ÕÀÝÉÈ ÒÁÚÄÅÌÏ× ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÒÁÚÄÅÌ Windows ÄÌÑ loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ëÏÔÏÒÙÊ ÒÁÚÄÅÌ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "÷ÙÂÅÒÉÔÅ ÒÁÚÍÅÒÙ"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "òÁÚÍÅÒ ËÏÒÎÅ×ÏÇÏ ÒÁÚÄÅÌÁ × MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "òÁÚÍÅÒ ÒÁÚÄÅÌÁ swap × MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ Ó×ÏÂÏÄÎÏÅ ÍÅÓÔÏ ÒÁÚÄÅÌÁ Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "òÁÚÍÅÒ ËÁËÏÇÏ ÒÁÚÄÅÌÁ ×Ù ÈÏÔÉÔÅ ÉÚÍÅÎÉÔØ?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "÷ÙÞÉÓÌÅÎÉÅ ÇÒÁÎÉà ÆÁÊÌÏ×ÏÊ ÓÉÓÔÅÍÙ Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"ðÒÏÇÒÁÍÍÁ ÉÚÍÅÎÅÎÉÑ ÒÁÚÍÅÒÁ ÒÁÚÄÅÌÏ× FAT ÎÅ ÍÏÖÅÔ ÏÂÒÁÂÏÔÁÔØ ÒÁÚÄÅÌ, \n"
-"ÐÒÏÉÚÏÛÌÁ ÓÌÅÄÕÀÝÁÑ ÏÛÉÂËÁ: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"÷ÁÛ ÒÁÚÄÅÌ Windows ÓÌÉÛËÏÍ ÆÒÁÇÍÅÎÔÉÒÏ×ÁÎ, ÚÁÐÕÓÔÉÔÅ ÓÎÁÞÁÌÁ ``defrag'' "
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"÷îéíáîéå!\n"
-"\n"
-"óÅÊÞÁÓ DrakX ÄÏÌÖÅÎ ÉÚÍÅÎÉÔØ ÒÁÚÍÅÒ ×ÁÛÅÇÏ ÒÁÚÄÅÌÁ Windows. âÕÄØÔÅ "
-"ÏÓÔÏÒÏÖÎÙ: ÜÔÁ ÏÐÅÒÁÃÉÑ ÏÐÁÓÎÁ. ÷ÙÊÄÉÔÅ ÉÚ ÐÒÏÃÅÄÕÒÙ ÕÓÔÁÎÏ×ËÉ É \n"
-"ÚÁÐÕÓÔÉÔÅ scandisk ÐÏÄ Windows, ÅÓÌÉ ×Ù ÎÅ ÓÄÅÌÁÌÉ ÜÔÏ ÄÏ ÓÉÈ ÐÏÒ (É \n"
-"ÖÅÌÁÔÅÌØÎÏ defrag), Á ÚÁÔÅÍ ×ÅÒÎÉÔÅÓØ Ë ÕÓÔÁÎÏ×ËÅ. óÄÅÌÁÊÔÅ ÔÁËÖÅ \n"
-"ÒÅÚÅÒ×ÎÕÀ ËÏÐÉÀ ÄÁÎÎÙÈ.\n"
-"åÓÌÉ ÇÏÔÏ×Ù, ÎÁÖÍÉÔÅ Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "ëÁËÏÊ ÒÁÚÍÅÒ ×Ù ÈÏÔÉÔÅ ÓÏÈÒÁÎÉÔØ ÄÌÑ windows"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "ÒÁÚÄÅÌ %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ÉÚÍÅÎÅÎÉÅ ÒÁÚÍÅÒÁ FAT ÐÒÏ×ÁÌÉÌÏÓØ: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"îÅÔ ÒÁÚÄÅÌÏ× FAT ÄÌÑ ÉÚÍÅÎÅÎÉÑ ÒÁÚÍÅÒÁ ÉÌÉ ÒÁÚÍÅÝÅÎÉÑ loopback (ÉÌÉ ÏÓÔÁÌÏÓØ "
-"ÎÅÄÏÓÔÁÔÏÞÎÏ ÍÅÓÔÁ)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "ïÞÉÓÔÉÔØ ×ÅÓØ ÄÉÓË"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "õÄÁÌÉÔØ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"õ ×ÁÓ ÎÅÓËÏÌØËÏ ÖÅÓÔËÉÈ ÄÉÓËÏ×. îÁ ËÁËÏÊ ÉÚ ÎÉÈ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "÷óå ÓÕÝÅÓÔ×ÕÀÝÉÅ ÒÁÚÄÅÌÙ É ÉÈ ÄÁÎÎÙÅ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ ÎÁ ÄÉÓËÅ %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "óÐÅÃÉÁÌØÎÏÅ ÒÁÚÂÉÅÎÉÅ ÄÉÓËÁ"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "éÓÐÏÌØÚÕÊÔÅ fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ôÅÐÅÒØ ÍÏÖÎÏ ÓÄÅÌÁÔØ ÒÁÚÂÉÅÎÉÅ %s.\n"
-"ðÏ ÚÁ×ÅÒÛÅÎÉÉ ÎÅ ÚÁÂÕÄØÔÅ ÓÏÈÒÁÎÉÔØ ÐÒÉ ÐÏÍÏÝÉ `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "õ ×ÁÓ ÎÅÄÏÓÔÁÔÏÞÎÏ ÍÅÓÔÁ ÎÁ ×ÁÛÅÍ ÒÁÚÄÅÌÅ Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "îÅ ÎÁÊÄÅÎÏ ÍÅÓÔÁ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "íÁÓÔÅÒ ÒÁÚÂÉÅÎÉÑ ÄÉÓËÁ ÉÚ DrakX ÎÁÛÅÌ ÓÌÅÄÕÀÝÉÅ ÒÅÛÅÎÉÑ:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "òÁÚÂÉÅÎÉÅ ÎÁ ÒÁÚÄÅÌÙ ÎÅ ÐÒÏÛÌÏ: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "áËÔÉ×ÉÚÁÃÉÑ ÓÅÔÉ"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "äÅÁËÔÉ×ÉÚÁÃÉÑ ÓÅÔÉ"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ, ÎÏ Ñ ÎÅ ÚÎÁÀ, ËÁË ÅÅ ËÏÒÒÅËÔÎÏ ÏÂÒÁÂÏÔÁÔØ.\n"
-"ðÒÏÄÏÌÖÁÊÔÅ ÎÁ Ó×ÏÊ ÓÔÒÁÈ É ÒÉÓË."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "äÕÂÌÉÒÏ×ÁÎÉÅ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"îÅËÏÔÏÒÙÅ ×ÁÖÎÙÅ ÐÁËÅÔÙ ÎÅ ÕÓÔÁÎÏ×ÉÌÉÓØ ËÏÒÒÅËÔÎÏ.\n"
-"ìÉÂÏ ×ÁÛ ÄÉÓËÏ×ÏÄ CD, ÌÉÂÏ CDROM ÎÅ × ÐÏÒÑÄËÅ.\n"
-"ðÒÏ×ÅÒØÔÅ cdrom ÎÁ ÕÓÔÁÎÏ×ÌÅÎÎÏÍ ËÏÍÐØÀÔÅÒÅ ËÏÍÁÎÄÏÊ \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "äÉÓËÏ×ÏÄ ÎÅÄÏÓÔÕÐÅÎ"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ðÅÒÅÈÏÄ ÎÁ ÜÔÁÐ `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"îÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ ÍÁÌÏ ÒÅÓÕÒÓÏ×. íÏÇÕÔ ×ÏÚÎÉËÎÕÔØ ÓÌÏÖÎÏÓÔÉ ÐÒÉ ÕÓÔÁÎÏ×ËÅ\n"
-"Mandrake Linux. åÓÌÉ ÜÔÏ ÓÌÕÞÉÔÓÑ, ×ÏÓÐÏÌØÚÕÊÔÅÓØ ÔÅËÓÔÏ×ÏÊ ÕÓÔÁÎÏ×ËÏÊ. äÌÑ "
-"ÜÔÏÇÏ\n"
-"ÎÁÖÍÉÔÅ `F1' ÐÒÉ ÚÁÇÒÕÚËÅ Ó CDROM, É ÚÁÔÅÍ ÎÁÂÅÒÉÔÅ `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "ëÌÁÓÓ õÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÏÄÉÎ ÉÚ ÓÌÅÄÕÀÝÉÈ ËÌÁÓÓÏ× ÕÓÔÁÎÏ×ËÉ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "ïÂÝÉÊ ÏÂßÅÍ ÄÌÑ ×ÙÂÒÁÎÎÙÈ ×ÁÍÉ ÇÒÕÐÐ ÓÏÓÔÁ×ÌÑÅÔ ÐÒÉÍÅÒÎÏ %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"åÓÌÉ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÏÂßÅÍ, ÍÅÎØÛÉÊ ÞÅÍ ÜÔÏÔ, ÕËÁÖÉÔÅ ÐÒÏÃÅÎÔ \n"
-"ÐÁËÅÔÏ×, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ.\n"
-"\n"
-"ðÒÉ ÎÉÚËÉÈ ÐÒÏÃÅÎÔÁÈ ÕÓÔÁÎÏ×ÑÔÓÑ ÔÏÌØËÏ ÎÁÉÂÏÌÅÅ ×ÁÖÎÙÅ ÐÁËÅÔÙ;\n"
-"ÕËÁÚÁÎÉÅ 100%% ÐÒÉ×ÅÄÅÔ Ë ÕÓÔÁÎÏ×ËÅ ×ÓÅÈ ×ÙÂÒÁÎÎÙÈ ÐÁËÅÔÏ×."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"õ ×ÁÓ ÅÓÔØ ÍÅÓÔÏ ÎÁ ÄÉÓËÅ ÔÏÌØËÏ ÄÌÑ %d%% ÉÚ ÜÔÉÈ ÐÁËÅÔÏ×.\n"
-"\n"
-"åÓÌÉ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ ÍÅÎØÛÅ, ÞÅÍ ÜÔÏ, ÕËÁÖÉÔÅ × ÐÒÏÃÅÎÔÁÈ ÄÏÌÀ,\n"
-"ÐÁËÅÔÏ×, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ.\n"
-"ðÒÉ ÎÉÚËÉÈ ÐÒÏÃÅÎÔÁÈ ÕÓÔÁÎÏ×ÑÔÓÑ ÔÏÌØËÏ ÎÁÉÂÏÌÅÅ ×ÁÖÎÙÅ ÐÁËÅÔÙ;\n"
-"ÕËÁÚÁÎÉÅ %d%% ÐÒÉ×ÅÄÅÔ Ë ÕÓÔÁÎÏ×ËÅ ÎÁÉÂÏÌØÛÅÇÏ ×ÏÚÍÏÖÎÏÇÏ ÞÉÓÌÁ ÐÁËÅÔÏ×."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "âÏÌÅÅ ÔÏÞÎÙÊ ÉÈ ×ÙÂÏÒ ÍÏÖÎÏ ÂÕÄÅÔ ÓÄÅÌÁÔØ ÎÁ ÓÌÅÄÕÀÝÅÍ ÛÁÇÅ."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "ðÒÏÃÅÎÔ ÐÁËÅÔÏ× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "÷ÙÂÏÒ ÇÒÕÐÐÙ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "÷ÙÂÏÒ ÏÔÄÅÌØÎÙÈ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "ïÂÝÉÊ ÏÂßÅÍ: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "ðÌÏÈÏÊ ÐÁËÅÔ"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "éÍÑ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "÷ÅÒÓÉÑ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "òÁÚÍÅÒ: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "÷ÁÖÎÏÓÔØ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"îÅÌØÚÑ ×ÙÂÉÒÁÔØ ÜÔÏÔ ÐÁËÅÔ, ÐÏÓËÏÌØËÕ ÄÌÑ ÅÇÏ ÕÓÔÁÎÏ×ËÉ ÎÅÄÏÓÔÁÔÏÞÎÏ ÍÅÓÔÁ"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "âÕÄÕÔ ÕÓÔÁÎÏ×ÌÅÎÙ ÓÌÅÄÕÀÝÉÅ ÐÁËÅÔÙ"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "âÕÄÕÔ ÕÄÁÌÅÎÙ ÓÌÅÄÕÀÝÉÅ ÐÁËÅÔÙ"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "÷Ù ÎÅ ÍÏÖÅÔÅ ×ÙÂÒÁÔØ/ÏÔÍÅÎÉÔØ ×ÙÂÏÒ ÜÔÏÇÏ ÐÁËÅÔÁ"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "üÔÏ ÏÂÑÚÁÔÅÌØÎÙÊ ÐÁËÅÔ, ÏÔ ÎÅÇÏ ÎÅÌØÚÑ ÏÔËÁÚÁÔØÓÑ"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "îÅÌØÚÑ ÏÔÍÅÎÉÔØ ×ÙÂÏÒ ÜÔÏÇÏ ÐÁËÅÔÁ, ÏÎ ÕÖÅ ÕÓÔÁÎÏ×ÌÅÎ."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"üÔÏÔ ÐÁËÅÔ ÓÌÅÄÕÅÔ ÏÂÎÏ×ÉÔØ\n"
-"÷Ù Õ×ÅÒÅÎÙ, ÞÔÏ ÈÏÔÉÔÅ ÏÔÍÅÎÉÔØ ÅÇÏ ×ÙÂÏÒ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "îÅÌØÚÑ ÏÔÍÅÎÉÔØ ×ÙÂÏÒ ÜÔÏÇÏ ÐÁËÅÔÁ. ïÎ ÄÏÌÖÅÎ ÂÙÔØ ÏÂÎÏ×ÌÅÎ"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "ðÏËÁÚÁÔØ Á×ÔÏÍÁÔÉÞÅÓËÉ×ÙÂÒÁÎÎÙÅ ÐÁËÅÔÙ"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "óÏÈÒÁÎÉÔØ ÎÁ ÄÉÓËÅÔÅ"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "óÏÈÒÁÎÉÔØ ×ÙÂÏÒ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "÷ÙÈÏÄ ÉÚ ÐÒÏÃÅÓÓÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "÷ÙÂÏÒ ÐÁËÅÔÏ× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "éÄÅÔ ÕÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "óÍÅÔÁ"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "ïÓÔÁ×ÛÅÅÓÑ ×ÒÅÍÑ "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÐÏÄÏÖÄÉÔÅ, ÐÏÄÇÏÔÁ×ÌÉ×ÁÅÔÓÑ ÕÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ÐÁËÅÔÏ×"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "ðÒÉÎÑÔØ"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "ïÔËÁÚÁÔØÓÑ"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"óÍÅÎÉÔÅ Cd-Rom!\n"
-"\n"
-"÷ÓÔÁ×ØÔÅ Cd-Rom ÐÏÄ ÎÁÚ×ÁÎÉÅÍ \"%s\" × ÐÒÉ×ÏÄ É ÎÁÖÍÉÔÅ Ok.\n"
-"åÓÌÉ Õ ×ÁÓ ÅÇÏ ÎÅÔ, ÎÁÖÍÉÔÅ ïÔÍÅÎÉÔØ (Cancel), ÞÔÏÂÙ ÉÚÂÅÖÁÔØ ÕÓÔÁÎÏ×ËÉ Ó "
-"ÜÔÏÇÏ ÄÉÓËÁ."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "÷ÓÅ ÒÁ×ÎÏ ÐÒÏÄÏÌÖÁÔØ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ ÐÏÌÕÞÅÎÉÑ ÐÁËÅÔÏ×:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "ðÒÉ ÕÓÔÁÎÏ×ËÅ ÐÁËÅÔÏ× ÐÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"÷ÎÉÍÁÎÉÅ\n"
-"ðÏÖÁÌÕÊÓÔÁ, ×ÎÉÍÁÔÅÌØÎÏ ÐÒÏÞÉÔÁÊÔÅ ÕÓÌÏ×ÉÑ, ÐÒÉ×ÅÄÅÎÎÙÅ ÎÉÖÅ. åÓÌÉ ×Ù ÎÅ "
-"ÓÏÇÌÁÓÎÙ Ó ÌÀÂÏÊ ÞÁÓÔØÀ\n"
-", ×ÁÍ ÎÅ ÒÁÚÒÅÛÁÅÔÓÑ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ ÓÌÅÄÕÀÝÉÊ CD. îÁÖÍÉÔÅ 'ïÔËÁÚÁÔØÓÑ' \n"
-"ÄÌÑ ÐÒÏÄÏÌÖÅÎÉÑ ÕÓÔÁÎÏ×ËÉ ÂÅÚ ÜÔÏÇÏ ÎÏÓÉÔÅÌÑ.\n"
-"\n"
-"\n"
-"îÅËÏÔÏÒÙÅ ËÏÍÐÏÎÅÎÔÙ, ÓÏÄÅÒÖÁÝÉÅÅÓÑ ÎÁ ÓÌÅÄÕÀÝÅÍ CD ÎÅ ÒÕËÏ×ÏÄÓÔ×ÕÀÔÓÑ\n"
-"ÌÉÃÅÎÚÉÅÊ GPL ÉÌÉ ÐÏÄÏÂÎÙÍÉ ÓÏÇÌÁÛÅÎÉÑÍÉ. ëÁÖÄÙÊ ÔÁËÏÊ ËÏÍÐÏÎÅÎÔ\n"
-"ÒÕËÏ×ÏÄÓÔ×ÕÅÔÓÑ ÎÅÐÏÓÒÅÄÓÔ×ÅÎÎÏ ÕÓÌÏ×ÉÑÍÉ ÅÇÏ ÌÉÃÅÎÚÉÉ. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "ðÒÏÉÚÏÛÌÁ ÏÛÉÂËÁ"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "÷Ù ÈÏÔÉÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔØ"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "ìÉÃÅÎÚÉÏÎÎÏÅ ÓÏÇÌÁÛÅÎÉÅ"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"÷×ÅÄÅÎÉÅ\n"
-"\n"
-"ïÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ É ÒÁÚÌÉÞÎÙÅ ËÏÍÐÏÎÅÎÔÙ, ÄÏÓÔÕÐÎÙÅ × ÄÉÓÔÒÉÂÕÔÉ×Å "
-"Mandrake Linux \n"
-"ÄÁÌÅÅ ÂÕÄÕÔ ÎÁÚÙ×ÁÔØÓÑ \"ðÒÏÇÒÁÍÍÎÙÅ ðÒÏÄÕËÔÙ\". ðÒÏÇÒÁÍÍÎÙÅ ÐÒÏÄÕËÔÙ "
-"ÏÔÎÏÓÑÔÓÑ, ÎÏ ÎÅ ÏÇÒÁÎÉÞÉ×ÁÀÔÓÑ \n"
-"ÎÁÂÏÒ ÐÒÏÇÒÁÍÍ, ÍÅÔÏÄÏ×, ÐÒÁ×ÉÌ É ÄÏËÕÍÅÎÔÁÃÉÉ, ÏÔÎÏÓÑÝÉÍÓÑ Ë ÏÐÅÒÁÃÉÏÎÎÏÊ \n"
-"ÓÉÓÔÅÍÅ É ÒÁÚÌÉÞÎÙÍ ËÏÍÐÏÎÅÎÔÁÍ ÄÉÓÔÒÉÂÕÔÉ×Á Mandrake Linux.\n"
-"\n"
-"\n"
-"1. ìÉÃÅÚÉÏÎÎÏÅ ÓÏÇÌÁÛÅÎÉÅ\n"
-"\n"
-"ðÏÖÁÌÕÊÓÔÁ, ÐÒÏÞÉÔÁÊÔÅ ÜÔÏÔ ÄÏËÕÍÅÎÔ ×ÎÉÍÁÔÅÌØÎÏ. üÔÏÔ ÄÏËÕÍÅÎÔ Ñ×ÌÑÅÔÓÑ "
-"ÌÉÃÅÎÚÉÏÎÎÙÍ ÓÏÇÌÁÛÅÎÉÅÍ ÍÅÖÄÕ ÷ÁÍÉ É   \n"
-"MandrakeSoft S.A., ËÏÔÏÒÏÅ ÐÒÉÍÅÎÑÅÔÓÑ Ë ðÒÏÇÒÁÍÍÎÙÍ ðÒÏÄÕËÔÁÍ.\n"
-"õÔÓÁÎÁ×ÌÉ×ÁÑ, ËÏÐÉÒÕÑ ÉÌÉ ÉÓÐÏÌØÚÕÑ ÌÀÂÙÍ ÏÂÒÁÚÏÍ ðÒÏÇÒÁÍÍÙÎÅ ðÒÏÄÕËÔÙ, ÷Ù "
-"Ñ×ÎÏ \n"
-"ÐÒÉÎÉÍÁÅÔÅ É ÐÏÌÎÏÓÔØÀ ÓÏÇÌÁÛÁÅÔÅÓØ ÓÌÅÄÏ×ÁÔØ ÔÅÒÍÉÎÁÍ É ÕÓÌÏ×ÉÑÍ  ÜÔÏÊ "
-"ìÉÃÅÎÚÉÉ. \n"
-"åÓÌÉ ÷Ù ÎÅ ÓÏÇÌÁÓÎÙ Ó ÌÀÂÏÊ ÞÁÓÔØÀ ÄÁÎÎÏÊ ìÉÃÅÎÚÉÉ, ÷ÁÍ ÎÅ ÒÁÚÒÅÛÁÅÔÓÑ "
-"ÕÓÔÁÎÁ×ÌÉ×ÁÔØ, ËÏÐÉÒÏ×ÁÔØ ÉÌÉ ÉÓÐÏÌØÚÏ×ÁÔØ \n"
-"ðÒÏÇÒÁÍÍÎÙÅ ÐÒÏÄÕËÔÙ. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "ëÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÒÁÓËÌÁÄËÕ ×ÁÛÅÊ ËÌÁ×ÉÁÔÕÒÙ"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "ðÏÌÎÙÊ ÓÐÉÓÏË ÄÏÓÔÕÐÎÙÈ ËÌÁ×ÉÁÔÕÒ"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "ëÁËÏÊ ËÌÁÓÓ ÕÓÔÁÎÏ×ËÉ ×Ù ÈÏÔÉÔÅ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "õÓÔÁÎÏ×ËÁ/ïÂÎÏ×ÌÅÎÉÅ"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "üÔÏ ÎÏ×ÁÑ ÕÓÔÁ×Ï×ËÁ ÉÌÉ ÏÂÎÏ×ÌÅÎÉÅ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "òÅËÏÍÅÎÄÕÅÔÓÑ"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "üËÓÐÅÒÔ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "ïÂÎÏ×ÌÅÎÉÅ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "óÏÈÒÁÎÉÔØ ×ÙÂÏÒ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÕËÁÖÉÔÅ ÔÉÐ ×ÁÛÅÊ ÍÙÛÉ"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "ðÏÒÔ ÍÙÛÉ"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "õËÁÖÉÅÔ, Ë ËÁËÏÍÕ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÍÕ ÐÏÒÔÕ ÐÏÄËÌÀÞÅÎÁ ×ÁÛÁ ÍÙÛØ."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "üÍÕÌÑÃÉÑ ËÎÏÐÏË ÍÙÛÉ"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "üÍÕÌÑÃÉ 2 ËÎÏÐÏË"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "üÍÕÌÑÃÉÑ 3 ËÎÏÐÏË"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "îÁÓÔÒÏÊËÁ ËÁÒÔ PCMCIA ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "îÁÓÔÒÏÊËÁ IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ÎÅÔ ÄÏÓÔÕÐÎÙÈ ÒÁÚÄÅÌÏ×"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "ðÒÏÓÍÏÔÒ ÒÁÚÄÅÌÏ× - ÐÏÉÓË ÔÏÞÅË ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "÷ÙÂÅÒÉÔÅ ÔÏÞËÉ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"îÅ ÍÏÇÕ ÐÒÏÞÉÔÁÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×, ÏÎÁ ÓÌÉÛËÏÍ ÐÏ×ÒÅÖÄÅÎÁ ÄÌÑ ÍÅÎÑ :(\n"
-"íÏÖÎÏ ÐÏÐÒÏÂÏ×ÁÔØ ÏÞÉÓÔÉÔØ ÐÌÏÈÉÅ ÒÁÚÄÅÌÙ (÷óñ éîæïòíáãéñ ÂÕÄÅÔ ÐÏÔÒÅÑÎÁ!).\n"
-"äÒÕÇÏÊ ×ÁÒÉÁÎÔ - ÎÅ ÒÁÚÒÅÛÁÔØ DrakX ÉÚÍÅÎÑÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×.\n"
-"(ÏÛÉÂËÁ %s)\n"
-"\n"
-"÷Ù ÓÏÇÌÁÓÎÙ ÐÏÔÅÒÑÔØ ×ÓÅ ×ÁÛÉ ÒÁÚÄÅÌÙ?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ÎÅ ÓÍÏÇ ËÏÒÒÅËÔÎÏ ÐÒÏÞÉÔÁÔØ ÔÁÂÌÉÃÕ ÒÁÚÄÅÌÏ×.\n"
-"ðÒÏÄÏÌÖÁÊÔÅ ÎÁ Ó×ÏÊ ÓÔÒÁÈ É ÒÉÓË!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "÷ÙÂÏÒ ÒÁÚÄÅÌÏ× ÄÌÑ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "ëÏÒÎÅ×ÏÊ ÒÁÚÄÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "ëÁËÏÊ ÒÁÚÄÅÌ Ñ×ÌÑÅÔÓÑ ËÏÒÎÅ×ÙÍ (/) × ×ÁÛÅÊ ÓÉÓÔÅÍÅ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "þÔÏÂÙ ÍÏÄÉÆÉËÁÃÉÑ ÔÁÂÌÉÃÙ ÒÁÚÄÅÌÏ× ÏÓÕÝÅÓÔ×ÉÌÁÓØ, ÐÅÒÅÚÁÇÒÕÚÉÔÅÓØ"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "÷ÙÂÏÒ ÒÁÚÄÅÌÏ× ÄÌÑ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "ðÒÏ×ÅÒÉÔØ ÐÌÏÈÉÅ ÂÌÏËÉ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÒÁÚÄÅÌÏ×"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "óÏÚÄÁÎÉÅ É ÆÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"îÅÄÏÓÔÁÔÏÞÎÙÊ ÒÁÚÍÅÒ ×ÉÒÔÕÁÌØÎÏÊ ÐÁÍÑÔÉ (swap) ÄÌÑ ÕÓÔÁÎÏ×ËÉ, ÎÅÍÎÏÇÏ "
-"Õ×ÅÌÉÞØÔÅ"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "ðÒÏÓÍÏÔÒ ÄÏÓÔÕÐÎÙÈ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "ðÏÉÓË ÐÁËÅÔÏ× ÄÌÑ ÏÂÎÏ×ÌÅÎÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"îÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ ÏÓÔÁÌÏÓØ ÎÅÄÏÓÔÁÔÏÞÎÏ ÍÅÓÔÁ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÉÌÉ ÏÂÎÏ×ÌÅÎÉÑ (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "ðÏÌÎÏÓÔØÀ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "íÉÎÉÍÕÍ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "òÅËÏÍÅÎÄÕÅÔÓÑ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ Ó ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ Ó ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "÷ÙÂÏÒ ÇÒÕÐÐÙ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "÷ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "óÏÈÒÁÎÉÔØ ÎÁ ÄÉÓËÅÔÅ"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "÷ÙÂÒÁÎÎÙÊ ÒÁÚÍÅÒ ÂÏÌØÛÅ, ÞÅÍ ÄÏÓÔÕÐÎÏ ÍÅÓÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"åÓÌÉ Õ ×ÁÓ ÅÓÔØ ×ÓÅ CD ÉÚ ÐÒÉ×ÅÄÅÎÎÏÇÏ ÎÉÖÅ ÓÐÉÓËÁ, ÎÁÖÍÉÔÅ Ok.\n"
-"åÓÌÉ Õ ×ÁÓ ÎÅÔ ÎÉ ÏÄÎÏÇÏ ÉÚ ÎÉÈ, ÎÁÖÍÉÔÅ ïÔÍÅÎÉÔØ.\n"
-"åÓÌÉ ÏÔÓÕÔÓÔ×ÕÀÔ ÔÏÌØËÏ ÏÔÄÅÌØÎÙÅ CD, ÏÔÍÅÎÉÔÅ ÉÈ ×ÙÂÏÒ É ÎÁÖÍÉÔÅ Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ÐÏÄ ÉÍÅÎÅÍ \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "ðÏÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÞÉÓÔÕÀ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"ôÅÐÅÒØ Õ ×ÁÓ ÅÓÔØ ×ÏÚÍÏÖÎÏÓÔØ ÚÁÇÒÕÚÉÔØ ÐÒÏÇÒÁÍÍÙ ÄÌÑ ÛÉÆÒÏ×ÁÎÉÑ.\n"
-"\n"
-"÷îéíáîéå:\n"
-"\n"
-"÷ÓÌÅÄÓÔ×ÉÅ ÏÂÝÉÈ ÏÇÒÁÎÉÞÅÎÉÊ, ÎÁËÌÁÄÙ×ÁÅÍÙÈ ÎÁ ÐÒÏÇÒÁÍÍÙ ÜÔÏÇÏ ÒÏÄÁ É "
-"ÒÁÚÌÉÞÎÙÈ\n"
-"× ÒÁÚÎÙÈ ÚÁËÏÎÏÄÁÔÅÌØÓÔ×ÁÈ, ÐÒÏÄÁ×Åà É/ÉÌÉ ÐÏÌØÚÏ×ÁÔÅÌØ ÜÔÉÈ ÐÒÏÇÒÁÍÍ "
-"ÄÏÌÖÅÎ\n"
-"ÄÏÌÖÅÎ ÕÂÅÄÉÔØÓÑ, ÞÔÏ ÚÁËÏÎÙ ÅÇÏ/ÉÈ ÓÔÒÁÎ ÒÁÚÒÅÛÁÀÔ ÓËÁÞÉ×ÁÔØ, ÈÒÁÎÉÔØ\n"
-"É/ÉÌÉ ÉÓÐÏÌØÚÏ×ÁÔØ ÜÔÉ ÐÒÏÇÒÁÍÍÙ.\n"
-"\n"
-"ëÒÏÍÅ ÔÏÇÏ, ÐÒÏÄÁ×Åà É/ÉÌÉ ÐÏÌØÚÏ×ÁÔÅÌØ ÄÏÌÖÎÙ ÂÙÔØ Õ×ÅÒÅÎÙ, ÞÔÏ ÎÅ  "
-"ÎÁÒÕÛÁÀÔ\n"
-"ÚÁËÏÎÏ× Ó×ÏÅÊ ÓÔÒÁÎÙ. åÓÌÉ ÐÒÏÄÁ×Åà É/ÉÌÉ ÐÏÌØÚÏ×ÁÔÅÌØ ÐÒÅÓÔÕÐÁÅÔ\n"
-"ÜÔÉ ÐÒÉÍÅÎÉÍÙÅ Ë ÎÅÍÕ ÚÁËÏÎÙ, ÏÎ/ÏÎÉ ÐÏÎÅÓÅÔ ÓÕÒÏ×ÕÀ\n"
-"ÏÔ×ÅÔÓÔ×ÅÎÎÏÓÔØ.\n"
-"\n"
-"îÉ × ËÏÅÍ ÓÌÕÞÁÅ ÎÉ Mandrakesoft, ÎÉ ÅÅ ÉÓÐÏÌÎÉÔÅÌÉ É ÐÏÓÔÁ×ÝÉËÉ ÎÅ "
-"ÏÔ×ÅÞÁÀÔ\n"
-"ÚÁ ÎÅÐÏÓÒÅÄÓÔ×ÅÎÎÙÊ, ÎÅÐÒÑÍÏÊ ÉÌÉ ÓÌÕÞÁÊÎÙÊ ×ÒÅÄ (×ËÌÀÞÁÑ, ÎÏ ÎÅ \n"
-"ÏÇÒÁÎÉÞÉ×ÁÑÓØ ÕÐÕÝÅÎÎÏÊ ÐÒÉÂÙÌØÀ, ÐÒÅÒÙ×ÁÎÉÅÍ ÂÉÚÎÅÓÁ, ÐÏÔÅÒÅÊ ËÏÍÍÅÒÞÅÓËÉÈ "
-"ÄÁÎÎÙÈ É\n"
-"ÄÒÕÇÉÍÉ ÐÏÔÅÒÑÍÉ, Á ÔÁËÖÅ ×ÏÚÍÏÖÎÙÍÉ ÓÁÎËÃÉÑÍÉ É ÛÔÒÁÆÁÍÉ ÐÏÄÌÅÖÁÝÉÍÉ "
-"ÕÐÌÁÔÅ\n"
-"ÐÏ ÒÅÛÅÎÉÀ ÓÕÄÁ) ×ÙÔÅËÁÀÝÉÊ ÉÚ ÉÓÐÏÌØÚÏ×ÁÎÉÑ, ×ÌÁÄÅÎÉÑ, ÉÌÉ ÐÒÏÓÔÏ\n"
-"ÓËÁÞÉ×ÁÎÉÑ ÜÔÉÈ ÐÒÏÇÒÁÍÍ, Ë ËÏÔÏÒÙÍ ÐÒÏÄÁ×Åà ÉÌÉ ÐÏÌØÚÏ×ÁÔÅÌØ ÐÏÌÕÞÉÌÉ\n"
-"ÄÏÓÔÕÐ ÐÏÓÌÅ ÐÏÄÐÉÓÁÎÉÑ ÎÁÓÔÏÑÝÅÇÏ ÓÏÇÌÁÛÅÎÉÑ.\n"
-"\n"
-"ó ÌÀÂÙÍÉ ×ÏÐÒÏÓÁÍÉ, ËÁÓÁÀÝÉÍÉÓÑ ÓÏÇÌÁÛÅÎÉÑ, ÏÂÒÁÝÁÊÔÅÓØ: \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "ó×ÑÚØ Ó ÓÅÒ×ÅÒÏÍ ÄÌÑ ÐÏÌÕÞÅÎÉÑ ÓÐÉÓËÁ ÄÏÓÔÕÐÎÙÈ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "÷ÙÂÏÒ ÓÅÒ×ÅÒÁ ÄÌÑ ÐÏÌÕÞÅÎÉÑ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "ó×ÑÚØ Ó ÓÅÒ×ÅÒÏÍ ÄÌÑ ÐÏÌÕÞÅÎÉÑ ÓÐÉÓËÁ ÄÏÓÔÕÐÎÙÈ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "ëÁËÏ× ×ÁÛ ÞÁÓÏ×ÏÊ ÐÏÑÓ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "÷ÁÛÉ ÓÉÓÔÅÍÎÙÅ ÞÁÓÙ ÕÓÔÁÎÏ×ÌÅÎÙ ÎÁ GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS ÓÅÒ×ÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "åÓÔØ ÌÉ Õ ×ÁÓ ÄÒÕÇÏÊ?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "òÅÚÀÍÅ"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "íÙÛØ"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "þÁÓÏ×ÏÊ ÐÏÑÓ"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "÷ÎÕÔÒÅÎÎÑÑ ËÁÒÔÁ ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "ú×ÕËÏ×ÁÑ ËÁÒÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV ËÁÒÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "úÁÄÁÎÉÅ ÐÁÒÏÌÑ ÄÌÑ root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "îÅÔ ÐÁÒÏÌÑ"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "üÔÏÔ ÐÁÒÏÌØ ÓÌÉÛËÏÍ ÐÒÏÓÔ (ÅÇÏ ÄÌÉÎÁ ÄÏÌÖÎÁ ÂÙÔØ ÎÅ ÍÅÎÅÅ %d ÓÉÍ×ÏÌÏ×)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "áÕÔÅÎÔÉÆÉËÁÃÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "áÕÔÅÎÔÉÆÉËÁÃÉÑ"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "NIS ÓÅÒ×ÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "áÕÔÅÎÔÉÆÉËÁÃÉÑ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS ÄÏÍÅÎ"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ÓÅÒ×ÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"ó ÐÏÍÏÝØÀ ÓÐÅÃÉÁÌØÎÏÊ ÚÁÇÒÕÚÏÞÎÏÊ ÄÉÓËÅÔÙ ×Ù ÓÍÏÖÅÔÅ ÚÁÇÒÕÖÁÔØ Linux ×ÎÅ "
-"ÚÁ×ÉÓÉÍÏÓÔÉ ÏÔ ÏÂÙÞÎÏÇÏ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ. üÔÏ ÍÏÖÅÔ ÂÙÔØ ÐÏÌÅÚÎÏ, ÅÓÌÉ "
-"×Ù ÎÅ ÈÏÔÉÔÅ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ SILO, ÉÌÉ ÅÓÌÉ ÄÒÕÇÁÑ ÏÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ ÕÄÁÌÉÔ "
-"SILO, ÉÌÉ SILO ÎÅ ÓÍÏÖÅÔ ÒÁÂÏÔÁÔØ × ×ÁÛÅÊ ËÏÎÆÉÇÕÒÁÃÉÉ. óÐÅÃÉÁÌØÎÁÑ "
-"ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ ÔÁËÖÅ ÍÏÖÅÔ ÂÙÔØ ÉÓÐÏÌØÚÏ×ÁÎÁ Ó ÒÅÍÏÎÔÎÙÍ ÏÂÒÁÚÏÍ "
-"Mandrake, ÞÔÏ ÎÁÍÎÏÇÏ ÏÂÌÅÇÞÉÔ ×ÏÓÓÔÁÎÏ×ÌÅÎÉÅ ÓÉÓÔÅÍÙ ÐÏÓÌÅ ÔÑÖÅÌÙÈ ÓÂÏÅ×.\n"
-"\n"
-"åÓÌÉ ÈÏÔÉÔÅ ÓÏÚÄÁÔØ ÚÁÇÒÕÚÏÞÎÙÊ ÄÉÓË ÄÌÑ Ó×ÏÅÊ ÓÉÓÔÅÍÙ, ×ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × "
-"ÐÅÒ×ÙÊ \n"
-"ÄÉÓËÏ×ÏÄ É ÎÁÖÍÉÔÅ \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "ðÅÒ×ÙÊ ÄÉÓËÏ×ÏÄ"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "÷ÔÏÒÏÊ ÄÉÓËÏ×ÏÄ"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "ðÒÏÐÕÓÔÉÔØ"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"óÐÅÃÉÁÌØÎÁÑ ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ ÏÂÅÓÐÅÞÉ×ÁÅÔ ×ÏÚÍÏÖÎÏÓÔØ ÚÁÇÒÕÚËÉ Linux ×ÎÅ "
-"ÚÁ×ÉÓÉÍÏÓÔÉ ÏÔ ÏÂÙÞÎÏÇÏ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ. üÔÏ ÍÏÖÅÔ ÂÙÔØ ÐÏÌÅÚÎÏ, ÅÓÌÉ "
-"×Ù ÎÅ ÈÏÔÉÔÅ ÕÓÔÁÎÁ×ÌÉ×ÁÔØ LILO (ÉÌÉ grub) ÎÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ, ÉÌÉ ÅÓÌÉ ÄÒÕÇÁÑ "
-"ÏÐÅÒÁÃÉÏÎÎÁÑ ÓÉÓÔÅÍÁ ÕÄÁÌÉÔ LILO, ÉÌÉ LILO ÎÅ ÓÍÏÖÅÔ ÒÁÂÏÔÁÔØ × ×ÁÛÅÊ "
-"ËÏÎÆÉÇÕÒÁÃÉÉ. óÐÅÃÉÁÌØÎÁÑ ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ ÔÁËÖÅ ÍÏÖÅÔ ÂÙÔØ ÉÓÐÏÌØÚÏ×ÁÎÁ "
-"Ó ÒÅÍÏÎÔÎÙÍ ÏÂÒÁÚÏÍ Mandrake, ÞÔÏ ÎÁÍÎÏÇÏ ÏÂÌÅÇÞÉÔ ×ÏÓÓÔÁÎÏ×ÌÅÎÉÅ ÓÉÓÔÅÍÙ "
-"ÐÏÓÌÅ ÔÑÖÅÌÙÈ ÓÂÏÅ×.\n"
-"èÏÔÉÔÅ ÓÏÚÄÁÔØ ÚÁÇÒÕÚÏÞÎÙÊ ÄÉÓË ÓÅÊÞÁÓ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "ðÒÏÓÔÉÔÅ, ÎÏ ÄÉÓËÏ×ÏÄ ÎÅÄÏÓÔÕÐÅÎ"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "÷ÙÂÅÒÉÔÅ ÄÉÓËÏ×ÏÄ, × ËÏÔÏÒÏÍ ÂÕÄÅÔ ÓÏÚÄÁ×ÁÔØÓÑ ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "óÏÚÄÁÎÉÅ ÚÁÇÒÕÚÏÞÎÏÊ ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "ðÏÄÇÏÔÏ×ËÁ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "÷Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"ïÛÉÂËÁ ÕÓÔÁÎÏ×ËÉ aboot, \n"
-"ÐÏÐÒÏÂÏ×ÁÔØ ÓÄÅÌÁÔØ ÕÓÔÁÎÏ×ËÕ ÎÁÓÉÌØÎÏ, ÄÁÖÅ ÅÓÌÉ ÜÔÏ ÒÁÚÒÕÛÉÔ ÐÅÒ×ÙÊ ÒÁÚÄÅÌ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "õÓÔÁÎÏ×ËÁ ÍÅÎÅÄÖÅÒÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ bootloader ÎÅ ÐÒÏÛÌÁ. ðÒÏÉÚÏÛÌÁ ÓÌÅÄÕÀÝÁÑ ÏÛÉÂËÁ:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"÷ÏÚÍÏÖÎÏ, ×ÁÍ ÎÕÖÎÏ ÓÍÅÎÉÔØ ×ÁÛ Open Firmware ÚÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï,\n"
-" ÞÔÏÂÙ ÚÁÒÁÂÏÔÁÌ ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË. åÓÌÉ ×Ù ÎÅ ×ÉÄÉÔÅ ÐÒÉÇÌÁÛÅÎÉÑ "
-"ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ\n"
-" ÐÒÉ ÐÅÒÅÚÁÇÒÕÚËÅt, ÎÁÖÍÉÔÅ É ÕÄÅÒÖÉ×ÁÊÔÅ Command-Option-O-F ÐÒÉ "
-"ÐÅÒÅÚÁÇÒÕÚËÅ É ××ÅÄÉÔÅ:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" úÁÔÅÍ ××ÅÄÉÔÅ: shut-down\n"
-"ðÒÉ ÓÌÅÄÕÀÝÅÊ ÚÁÇÒÕÚËÅ ×Ù Õ×ÉÄÉÔÅ ÐÒÉÇÌÁÛÅÎÉÅ ÎÁÞÁÌØÎÏÇÏ ÚÁÇÒÕÚÞÉËÁ."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "÷ÓÔÁ×ØÔÅ ÞÉÓÔÕÀ ÄÉÓËÅÔÕ × ÄÉÓËÏ×ÏÄ %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "óÏÚÄÁÎÉÅ ÓÁÍÏ-ÕÓÔÁÎÁ×ÌÉ×ÁÀÝÅÊÓÑ ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"îÅËÏÔÏÒÙÅ ÛÁÇÉ ÎÅ ÚÁ×ÅÒÛÅÎÙ.\n"
-"\n"
-"÷Ù ÄÅÊÓÔ×ÉÔÅÌØÎÏ ÈÏÔÉÔÅ ×ÙÊÔÉ ÓÅÊÞÁÓ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ðÏÚÄÒÁ×ÌÑÅÍ, ÕÓÔÁÎÏ×ËÁ ÚÁ×ÅÒÛÅÎÁ.\n"
-"÷ÙÎØÔÅ ÚÁÇÒÕÚÏÞÎÙÊ ÄÉÓË É ÎÁÖÍÉÔÅ enter ÄÌÑ ÐÅÒÅÚÁÇÒÕÚËÉ.\n"
-"\n"
-"\n"
-"úÁ ÉÎÆÏÒÍÁÃÉÅÊ Ï ÉÓÐÒÁ×ÌÅÎÉÑÈ ÄÁÎÎÏÇÏ ×ÙÐÕÓËÁ Mandrake Linux,\n"
-"ÏÂÒÁÝÁÊÔÅÓØ ÎÁ \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"éÎÆÏÒÍÁÃÉÑ Ï ÎÁÓÔÒÏÊËÅ ×ÁÛÅÊ ÓÉÓÔÅÍÙ ÅÓÔØ × ÐÏÓÌÅ-ÕÓÔÁÎÏ×ÏÞÎÏÊ\n"
-"ÇÌÁ×Å ×ÁÛÅÇÏ òÕËÏ×ÏÄÓÔ×Á ðÏÌØÚÏ×ÁÔÅÌÑ ÉÚ ïÆÉÃÉÁÌØÎÏÇÏ Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "óÏÚÄÁÎÉÅ ÓÁÍÏ-ÕÓÔÁÎÁ×ÌÉ×ÁÀÝÅÊÓÑ ÄÉÓËÅÔÙ"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"ðÒÉ ÖÅÌÁÎÉÉ Á×ÔÏÕÓÔÁÎÏ×ËÁ ÍÏÖÅÔ ÂÙÔØ ÐÏÌÎÏÓÔØÀ Á×ÔÏÍÁÔÉÚÉÒÏ×ÁÎÁ,\n"
-"× ÜÔÏÍ ÓÌÕÞÁÅ ÏÎÁ ÐÒÏÉÚÏÊÄÅÔ ÐÒÑÍÏ ÎÁ ÄÉÓË!!\n"
-"(ÜÔÏ ÉÍÅÌÏÓØ ××ÉÄÕ ÐÒÉ ÕÓÔÁÎÏ×ËÅ ÎÁ ÄÒÕÇÏÊ ËÏÍÐØÀÔÅÒ).\n"
-"\n"
-"÷ÏÚÍÏÖÎÏ, ×Ù ÐÒÅÄÐÏÞÔÅÔÅ ÐÏ×ÔÏÒÉÔØ ÕÓÔÁÎÏ×ËÕ.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "á×ÔÏÍÁÔÉÞÅÓËÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "ðÏ×ÔÏÒÉÔØ"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "óÏÈÒÁÎÉÔØ ×ÙÂÏÒ ÐÁËÅÔÏ×"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "õÓÔÁÎÏ×ËÁ Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> ÍÅÖÄÕ ÜÌÅÍÅÎÔÁÍÉ  |  <Space> ×ÙÂÏÒ  |  <F12> ÓÌÅÄÕÀÝÉÊ "
-"ÜËÒÁÎ "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ÏÔÓÕÔÓ×ÕÅÔ kdesy"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "÷ÙÂÅÒÉÔÅ ÄÅÊÓÔ×ÉÅ"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "ðÒÏÄ×ÉÎÕÔÙÊ"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "ðÏÄÏÖÄÉÔÅ, ÐÏÖÁÌÕÊÓÔÁ"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "éÎÆÏÒÍÁÃÉÑ"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "òÁÚ×ÅÒÎÕÔØ ÄÅÒÅ×Ï"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "ó×ÅÒÎÕÔØ ÄÅÒÅ×Ï"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "ðÅÒÅËÌÀÞÅÎÉÅ ÍÅÖÄÕ ÐÒÏÓÔÙÍ ÓÐÉÓËÏÍ É ÓÏÒÔÉÒÏ×ËÏÊ ÐÏ ÇÒÕÐÐÁÍ"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "ðÌÏÈÏÊ ×ÙÂÏÒ, ÐÏÐÒÏÂÕÊÔÅ ÅÝÅ\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "÷ÁÛ ×ÙÂÏÒ? (ÕÍÏÌÞÁÎÉÅ %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "÷ÁÛ ×ÙÂÏÒ? (ÕÍÏÌÞÁÎÉÅ %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "ðÁÒÁÍÅÔÒÙ: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "÷Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "÷ÁÛ ×ÙÂÏÒ? (ÕÍÏÌÞÁÎÉÅ %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "þÅÛÓËÉÊ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "îÅÍÅÃËÉÊ"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "éÓÐÁÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "æÉÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "æÒÁÎÃÕÚÓËÉÊ"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "îÏÒ×ÅÖÓËÉÊ"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "ðÏÌØÓËÉÊ"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "òÕÓÓËÉÊ"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "û×ÅÄÓËÉÊ"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "éÒÁÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "áÒÍÑÎÓËÉÊ (ÓÔÁÒÙÊ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "áÒÍÑÎÓËÉÊ (ÍÁÛÉÎÏÐÉÓØ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "áÒÍÑÎÓËÉÊ (ÆÏÎÅÔÉÞÅÓËÉÊ)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "áÚÅÒÂÁÊÄÖÁÎÓËÉÊ (ÌÁÔÉÎÉÃÁ)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "âÅÌØÇÉÊÓËÉÊ"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "áÒÍÑÎÓËÉÊ (ÆÏÎÅÔÉÞÅÓËÉÊ)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "âÏÌÇÁÒÓËÉÊ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "âÒÁÚÉÌØÓËÉÊ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "âeÌÏÒÕÓÓËÉÊ"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "û×ÅÊÃÁÒÓËÉÊ (îÅÍÅÃËÁÑ ÒÁÓËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "û×ÅÊÃÁÒÓËÉÊ (æÒÁÎÃÕÚÓËÁÑ ÒÁÓËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "þÅÛÓËÉÊ (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "îÅÍÅÃËÉÊ (ÂÅÚ ÍÅÒÔ×ÙÈ ËÌÁ×ÉÛ)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "äÁÔÓËÉÊ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (óûá)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (îÏÒ×ÅÖÓËÉÊ)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (óûá)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "üÓÔÏÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "çÒÕÚÉÎÓËÉÊ (\"òÕÓÓËÁÑ\" ÒÁÓËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "çÒÕÚÉÎÓËÉÊ (\"ìÁÔÉÎÓËÁÑ\" ÒÁÓËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "çÒÅÞÅÓËÉÊ"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "÷ÅÎÇÅÒÓËÉÊ"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "èÏÒ×ÁÔÓËÉÊ"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "é×ÒÉÔ"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "é×ÒÉÔ (ÆÏÎÅÔÉÞÅÓËÉÊ)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "éÒÁÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "éÓÌÁÎÄÓËÉÊ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "éÔÁÌØÑÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ñÐÏÎÓËÉÊ 106 ËÌÁ×ÉÛ"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "ëÏÒÅÊÓËÁÑ ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "ìÁÔÉÎÏ-áÍÅÒÉËÁÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "ìÉÔÏ×ÓËÉÊ AZERTY (ÓÔÁÒÙÊ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "ìÉÔÏ×ÓËÉÊ AZERTY (ÎÏ×ÙÊ)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ìÉÔÏ×ÓËÉÊ \"ÎÏÍÅÒ ÒÑÄÁ\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ìÉÔÏ×ÓËÉÊ \"ÆÏÎÅÔÉÞÅÓËÉÊ\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "íÅÓÔÏÎÁÈÏÖÄÅÎÉÅ"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "íÁËÅÄÏÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "çÏÌÌÁÎÄÓËÉÊ"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "ðÏÌØÓËÉÊ (ÒÁÓËÌÁÄËÁ qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "ðÏÌØÓËÉÊ (ÒÁÓËÌÁÄËÁ qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "ðÏÒÔÕÇÁÌØÓËÉÊ"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "ëÁÎÁÄÓËÉÊ (ë×ÅÂÅË)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "òÕÓÓËÉÊ (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "òÕÓÓËÉÊ (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "òÕÓÓËÉÊ (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "óÌÏ×ÅÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "óÌÏ×ÁÃËÉÊ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "óÌÏ×ÁÃËÉÊ (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "áÚÅÒÂÁÊÄÖÁÎÓËÉÊ (ËÉÒÉÌÌÉÃÁ)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "ôÁÂÌÉÃÁ"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "ôÁÊÓËÁÑ ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "ôÁÊÓËÁÑ ËÌÁ×ÉÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ôÕÒÅÃËÉÊ (ÔÒÁÄÉÃÉÏÎÎÁÑ \"F\" ÍÏÄÅÌØ)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ôÕÒÅÃËÉÊ (ÓÏ×ÒÅÍÅÎÎÁÑ \"Q\" ÍÏÄÅÌØ)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "õËÒÁÉÎÓËÉÊ"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US ËÌÁ×ÉÁÔÕÒÁ (ÉÎÔÅÒÎÁÃÉÏÎÁÌØÎÁÑ)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "÷ØÅÔÎÁÍÓËÉÊ \"ÞÉÓÌÏ×ÏÊ ÒÑÄ\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "àÇÏÓÌÁ×ÓËÉÊ (ÌÁÔÉÎÉÃÁ/ËÉÒÉÌÌÉÃÁ)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ãÉËÌÉÞÅÓËÏÅ ÍÏÎÔÉÒÏ×ÁÎÉÅ %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "óÎÁÞÁÌÁ ÕÄÁÌÉÔÅ ÌÏÇÉÞÅÓËÉÅ ÔÏÍÁ\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "íÙÛØ Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ïÂÙÞÎÁÑ PS2 ÍÙÛØ Ó ËÏÌÅÓÉËÏÍ"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 ËÎÏÐËÁ"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "ïÂÙÞÎÁÑ 2-È ËÎÏÐÏÞÎÁÑ ÍÙÛØ"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "ïÂÙÞÎÙÊ"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "ëÏÌÅÓÉËÏ"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÁÑ"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "ïÂÙÞÎÁÑ 3-È ËÎÏÐÏÞÎÁÑ ÍÙÛØ"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÁÑ, ÓÔÁÒÙÊ ÔÉÐ C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus-ÍÙÛØ"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 ËÎÏÐËÉ"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 ËÎÏÐËÉ"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ÎÉËÁËÏÊ"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "îÅÔ ÍÙÛÉ"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "ðÒÏ×ÅÒØÔÅ ×ÁÛÕ ÍÙÛØ"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "þÔÏÂÙ ÚÁÐÕÓÔÉÔØ ÍÙÛØ,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ðïëòõôéôå ëïìåóéëï!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "æÉÎÓËÉÊ"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "óÌÅÄÕÀÝÉÊ ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ðÒÅÄÙÄÕÝÉÊ"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "üÔÏ ×ÅÒÎÏ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "ðÏÄÓÏÅÄÉÎÉÔØÓÑ Ë éÎÔÅÒÎÅÔ"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"îÁÉÂÏÌÅÅ ÒÁÓÐÒÏÔÓÒÁÎÎÅÎÙÊ ÓÐÏÓÏÂÏ ÓÏÅÄÉÎÉÔØÓÑ ÞÅÒÅÚ adsl - ÐÒÏÇÒÁÍÍÁ pppoe.\n"
-"îÅËÏÔÏÒÙÅ ÓÏÅÄÉÎÅÎÉÑ ÉÓÐÏÌØÚÕÀÔ pptp, ÉÎÏÇÄÁ dhcp.\n"
-"åÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ×ÙÂÉÒÁÊÔÅ 'ÉÓÐÏÌØÚÏ×ÁÔØ pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ÉÓÐÏÌØÚÏ×ÁÔØ dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "ÉÓÐÏÌØÚÏ×ÁÔØ pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "use pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ëÁËÏÇÏ ËÌÉÅÎÔÓËÕÀ ÐÒÏÇÒÁÍÍÕ dhcp ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ?\n"
-"ðÏ ÕÍÏÌÞÁÎÉÀ - dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"îÁ ×ÁÛÅÊ ÓÉÓÔÅÍÅ ÎÅ ÏÂÎÁÒÕÖÅÎÏ ÓÅÔ×ÅÏÇÏ ÁÄÁÐÔÅÒÁ ethernet.\n"
-"îÅ ÍÏÇÕ ÕÓÔÁÎÏ×ÉÔØ ÜÔÏÔ ÔÉÐ ÓÏÅÄÉÎÅÎÉÑ."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "÷ÙÂÏÒ ÓÅÔÅ×ÏÇÏ ÉÎÔÅÒÆÅÊÓÁ"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"÷ÙÂÅÒÉÔÅ ÓÅÔÅ×ÏÊ ÁÄÁÐÔÅÒ, ËÏÔÏÒÙÊ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ ÓÏÅÄÉÎÅÎÉÑ Ó "
-"ÉÎÔÅÒÎÅÔ?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ÓÅÔÅ×ÙÈ ËÁÒÔ ÎÅ ÎÁÊÄÅÎÏ"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"÷×ÅÄÉÔÅ ÉÍÑ Ó×ÏÅÊ ÍÁÛÉÎÙ (host), ÅÓÌÉ ÚÎÁÅÔÅ ÅÇÏ.\n"
-"îÅËÏÔÏÒÙÍ ÓÅÒ×ÅÒÁÍ DHCP ÉÍÑ ÍÁÛÉÎÙ ÎÅÏÂÈÏÄÉÍÏ ÄÌÑ ÒÁÂÏÔÙ.\n"
-"éÍÑ ×ÁÛÅÊ ÍÁÛÉÎÙ ÄÏÌÖÎÏ ÂÙÔØ ÚÁÄÁÎÏ ÐÏÌÎÏÓÔØÀ,\n"
-"ÎÁÐÒÉÍÅÒ ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "éÍÑ ÍÁÛÉÎÙ"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "íÁÓÔÅÒ ÎÁÓÔÒÏÊËÉ ÓÅÔÉ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "÷ÎÅÛÎÉÊ ÍÏÄÅÍ ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "÷ÎÕÔÒÅÎÎÑÑ ËÁÒÔÁ ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ëÁËÏÊ Õ ×ÁÓ ×ÉÄ ISDN ÓÏÅÄÉÎÅÎÉÑ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "ïÂÎÁÒÕÖÅÎÁ ÎÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ (firewall)!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "ïÂÎÁÒÕÖÅÎÁ ÎÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ (firewall)!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"÷ÙÂÅÒÉÔÅ ÐÒÏ×ÁÊÄÅÒÁ.\n"
-" åÓÌÉ ÅÇÏ ÎÅÔ × ÓÐÉÓËÅ, ×ÙÂÅÒÉÔÅ îÅÕËÁÚÁÎÎÙÊ"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "ðÒÏÔËÏÌ ÚÁÇÒÕÚËÉ"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "å×ÒÏÐÁ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "ïÓÔÁÌØÎÏÊ ÍÉÒ"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"ïÓÔÁÌØÎÏÊ ÍÉÒ \n"
-" ÂÅÚ D-ËÁÎÁÌÁ (×ÙÄÅÌÅÎÎÙÈ ÌÉÎÉÊ)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "ëÁËÏÊ ÐÒÏÔÏËÏÌ ÂÕÄÅÔ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "ëÁËÏÊ Õ ×ÁÓ ÔÉÐ ËÁÒÔÙ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "ñ ÎÅ ÚÎÁÀ"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"åÓÌÉ Õ ×ÁÓ ËÁÒÔÁ ISA, ÔÏ ÚÎÁÞÅÎÉÑ ÎÁ ÓÌÅÄÕÀÝÅÍ ÜËÒÁÎÅ ÄÏÌÖÎÙ ÂÙÔØ ×ÅÒÎÙÍÉ.\n"
-"\n"
-"åÓÌÉ Õ ×ÁÓ ËÁÒÔÁ PCMCIA, ÔÏ ×ÁÍ ÎÁÄÏ ÚÎÁÔØ irq É io Ó×ÏÅÊ ËÁÒÔÙ.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "ïÔÍÅÎÉÔØ"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "ðÒÏÄÏÌÖÉÔØ"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ëÁËÁÑ Õ ×ÁÓ ËÁÒÔÁ ISDN ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ïÂÎÁÒÕÖÅÎÁ ËÁÒÔÁ ISDN PCI, ÎÏ ÅÅ ÔÉÐ ÎÅ ÕÄÁÌÏÓØ ÏÐÒÅÄÅÌÉÔØ. ÷ÙÂÅÒÉÔÅ ÎÁ "
-"ÓÌÅÄÕÀÝÅÍ ÜËÒÁÎÅ ËÁÒÔÕ PCI."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ëÁÒÔÁ ISDN PCI ÎÅ ÏÂÎÁÒÕÖÅÎÁ. ÷ÙÂÅÒÉÔÅ ÅÅ ÎÁ ÓÌÅÄÕÀÝÅÍ ÜËÒÁÎÅ."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "÷ÙÂÅÒÉÔÅ, Ë ËÁËÏÍÕ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÍÕ ÐÏÒÔÕ ÐÏÄËÌÀÞÅÎ ÍÏÄÅÍ."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "ðÁÒÁÍÅÔÒÙ ÄÏÚ×ÏÎÁ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "éÍÑ ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÁ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "éÍÑ (Login ID)"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "ÎÁ ÂÁÚÅ ÓËÒÉÐÔÁ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "ÎÁ ÂÁÚÅ ÔÅÒÍÉÎÁÌÁ"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "éÍÑ ÄÏÍÅÎÁ"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "ðÅÒ×ÙÊ ÓÅÒ×ÅÒ DNS (ÎÅÏÂÑÚÁÔÅÌØÎÏ)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "÷ÔÏÒÏÊ ÓÅÒ×ÅÒ DNS (ÎÅÏÂÑÚÁÔÅÌØÎÏ)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÏÔÓÏÅÄÉÎÉÔØÓÑ ÉÌÉ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×Ù ÓÏÅÄÉÎÅÎÙ Ó ÉÎÔÅÒÎÅÔ."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÓÏÅÄÉÎÉÔØÓÑ Ó ÉÎÔÅÒÎÅÔ ÉÌÉ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×Ù ÎÅ ÓÏÅÄÉÎÅÎÙ Ó ÉÎÔÅÒÎÅÔ."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "óÏÅÄÉÎÅÎÉÔØÓÑ"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "ïÔÓÏÅÄÉÎÉÔØÓÑ"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "óÏÅÄÉÎÅÎÉÅ éÎÔÅÒÎÅÔ É ÎÁÓÔÒÏÊËÁ"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÏÔÓÏÅÄÉÎÉÔØÓÑ ÉÌÉ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"÷Ù ÍÏÖÅÔÅ ÏÔÓÏÅÄÉÎÉÔØÓÑ ÉÌÉ ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "ëÏÎÆÉÇÕÒÁÃÉÑ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"ðÏÓËÏÌØËÕ ×Ù ÄÅÌÁÅÔÅ ÕÓÔÁÎÏ×ËÕ ÓÅÔÉ, ×ÁÛÁ ÓÅÔØ ÕÖÅ ÎÁÓÔÒÏÅÎÁ.\n"
-"îÁÖÍÉÔÅ Ok ÞÔÏÂÙ ÏÓÔÁ×ÉÔØ ÔÅËÕÝÉÅ ÎÁÓÔÒÏÊËÉ, ÉÌÉ ïÔÍÅÎÉÔØ, ÞÔÏÂÙ "
-"ÐÅÒÅÎÁÓÔÒÏÉÔØ ×ÁÛÅ ÓÏÅÄÉÅÎÉÅ Ó ÉÎÔÅÒÎÅÔ É ÌÏËÁÌØÎÏÊ ÓÅÔØÀ.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × íÁÓÔÅÒ ÎÁÓÔÒÏÊËÉ ÓÅÔÉ\n"
-"\n"
-"óÅÊÞÁÓ ÍÙ ÎÁÓÔÒÏÉÍ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ Ó ÉÎÔÅÒÎÅÔ É/ÉÌÉ ÌÏËÁÌØÎÏÊ ÓÅÔØÀ.\n"
-"åÓÌÉ ×Ù ÎÅ ÈÏÔÉÔÅ ÓÉÐÏÌØÚÏ×ÁÔØ Á×ÔÏÏÐÒÅÄÅÌÅÎÉÅ, ÏÔÍÅÎÉÔÅ ÇÁÌÏÞËÕ.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÒÏÆÉÌØ ÄÌÑ ÎÁÓÔÒÏÊËÉ"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ Á×ÔÏÏÐÒÅÄÅÌÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÕÓÔÒÏÊÓÔ×..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "ïÂÙÞÎÏÅ ÍÏÄÅÍÎÏÅ ÓÏÅÄÉÎÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "ÎÁÊÄÅÎ ÎÁ ÐÏÒÔÕ %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ÓÏÅÄÉÎÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "ÎÁÊÄÅÎÏ %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "óÏÅÄÉÎÅÎÉÅ ÐÏ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "ÏÂÎÁÒÕÖÅÎ ÎÁ ÉÎÔÅÒÆÅÊÓÅ %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "ëÁÂÅÌØÎÏÅ ÓÏÅÄÉÎÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "ëÁÂÅÌØÎÏÅ ÓÏÅÄÉÎÅÎÉÅ"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "óÏÅÄÉÎÅÎÉÅ ÐÏ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ÏÂÎÁÒÕÖÅÎÁ ÏÄÎÁ ÉÌÉ ÎÅÓËÏÌØËÏ ÓÅÔÅ×ÁÈ ËÁÒÔ ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÒÏÇÒÁÍÍÕ, ËÏÔÏÒÙÊ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "èÏÔÉÔÅ ÌÉ ×Ù, ÞÔÏÂÙ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ ÚÁÐÕÓËÁÌÏÓØ ÐÒÉ ÚÁÇÒÕÚËÅ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"÷ÏÚÎÉËÌÁ ÐÒÏÂÌÅÍÁ ÐÒÉ ÐÅÒÅÚÁÐÕÓËÅ ÓÅÔÉ: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"ðÏÚÄÒÁ×ÌÑÅÍ, ÎÁÓÔÒÏÊËÁ ÓÅÔÉ É ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÚÁ×ÅÒÛÅÎÁ.\n"
-"\n"
-"óÅÊÞÁÓ ÂÕÄÕÔ ÓÄÅÌÁÎÙ ÉÚÍÅÎÅÎÉÑ × ×ÁÛÅÊ ÓÉÓÔÅÍÅ.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"ðÏÓÌÅ ÜÔÏÇÏ ÍÙ ÒÅËÏÍÅÎÄÕÅÍ ÐÅÒÅÚÁÐÕÓÔÉÔØ ×ÁÛ X ÓÅÒ×ÅÒ, \n"
-"ÞÔÏÂÙ ÉÚÂÅÖÁÔØ ÐÒÏÂÌÅÍ ÉÚ-ÚÁ ÓÍÅÎÙ ÉÍÅÎÉ ËÏÍÐØÀÔÅÒÁ."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"÷îéíáîéå: üÔÏ ÕÓÔÒÏÊÓÔ×Ï ÒÁÎÅÅ ÂÙÌÏ ÓËÏÎÆÉÇÕÒÉÒÏ×ÁÎÏ ÄÌÑ ÐÏÄËÌÀÞÅÎÉÑ Ë "
-"ÉÎÔÅÒÎÅÔ.\n"
-"ðÒÏÓÔÏ ÏÓÔÁ×ØÔÅ ÜÔÏ ÕÓÔÒÏÊÓÔ×Ï ÎÁÓÔÒÏÅÎÎÙÍ.\n"
-"éÚÍÅÎÅÎÉÅ ÐÏÌÅÊ ×ÎÉÚÕ ÉÚÍÅÎÉÔ ÐÒÅÄÙÄÕÝÕÀ ÎÁÓÔÒÏÊËÕ."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"ðÏÖÁÌÕÊÓÔÁ ××ÅÄÉÔÅ IP ËÏÎÆÉÇÕÒÁÃÉÀ ÄÌÑ ×ÁÛÅÊ ÍÁÛÉÎÙ.\n"
-"ëÁÖÄÙÊ ÐÕÎËÔ ÄÏÌÖÅÎ ÂÙÔØ ÚÁÐÏÌÎÅÎ ËÁË IP ÁÄÒÅÓ × ÄÅÓÑÔÉÞÎÏ-ÔÏÞÅÞÎÏÊ \n"
-"ÎÏÔÁÃÉÉ (ÎÁÐÒÉÍÅÒ, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÅ×ÏÇÏ ÕÓÔÒÏÊÓÔ×Á %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ÁÄÒÅÓ"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "íÁÓËÁ ÓÅÔÉ"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "á×ÔÏÍÁÔÉÞÅÓËÉÊ IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÁÄÒÅÓ ÄÏÌÖÅÎ ÂÙÔØ × ÆÏÒÍÁÔÅ 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"÷×ÅÄÉÔÅ ÉÍÑ Ó×ÏÅÊ ÍÁÛÉÎÙ (host).\n"
-"éÍÑ ×ÁÛÅÊ ÍÁÛÉÎÙ ÄÏÌÖÎÏ ÂÙÔØ ÚÁÄÁÎÏ ÐÏÌÎÏÓÔØÀ,\n"
-"ÎÁÐÒÉÍÅÒ ``mybox.mylab.myco.com''.\n"
-"÷Ù ÍÏÖÅÔÅ ÔÁËÖÅ ××ÅÓÔÉ IP ÁÄÒÅÓ ÛÌÀÚÁ, ÅÓÌÉ ÏÎ Õ ×ÁÓ ÅÓÔØ"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ÓÅÒ×ÅÒ"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "ûÌÀÚÏ×ÏÅ ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "îÁÓÔÒÏÊËÁ proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy ÄÏÌÖÎÏ ÂÙÔØ http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ÄÏÌÖÎÏ ÂÙÔØ ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "èÏÔÉÔÅ ×ÏÊÔÉ × ÉÎÔÅÒÎÅÔ ÓÅÊÞÁÓ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "ðÒÏ×ÅÒËÁ ×ÁÛÅÇÏ ÓÏÅÄÉÎÅÎÉÑ..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "óÅÊÞÁÓ ÓÉÓÔÅÍÁ ÓÏÅÄÉÎÅÎÁ Ó éÎÔÅÒÎÅÔ."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "éÚ ÓÏÏÂÒÁÖÅÎÉÊ ÂÅÚÏÐÁÓÎÏÓÔÉ, ÓÏÅÄÉÎÅÎÉÅ ÂÕÄÅÔ ÓÅÊÞÁÓ ÒÁÚÏÒ×ÁÎÏ"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"ðÏÈÏÖÅ, ÓÉÓÔÅÍÁ ÎÅ ×ÏÛÌÁ × ÉÎÔÅÒÎÅÔ.\n"
-"ðÏÐÒÏÂÕÊÔÅ ÎÁÓÔÒÏÉÔØ ÓÏÅÄÉÎÅÎÉÅ."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "úÁÐÏÌÎÉÔÅ ÉÌÉ ÐÒÏ×ÅÒØÔÅ ÐÏÌÅ ×ÎÉÚÕ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "áÄÒÅÓ (DMA) ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 ËÁÒÔÙ"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "÷ÁÛ ÌÉÞÎÙÊ ÔÅÌÅÆÏÎÎÙÊ ÎÏÍÅÒ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "éÍÑ ÐÒÏ×ÁÊÄÅÒÁ (ÎÁÐÒ. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÁ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "IP ÁÄÒÅÓ ÐÅÒ×ÏÇÏ DNS ÓÅÒ×ÅÒÁ ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÑÚÁÔÅÌØÎÏ)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "IP ÁÄÒÅÓ ×ÔÏÒÏÇÏ DNS ÓÅÒ×ÅÒÁ ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÑÚÁÔÅÌØÎÏ)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "÷ÙÂÏÒ ËÌÁ×ÉÁÔÕÒÙ"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "òÅÖÉÍ ÄÏÚ×ÏÎÁ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "÷ÈÏÄ (ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "ðÁÒÏÌØ"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ÏÛÉÂËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "òÁÓÛÉÒÅÎÎÙÅ ÒÁÚÄÅÌÙ ÎÅ ÐÏÄÄÅÒÖÉ×ÁÀÔÓÑ ÎÁ ÜÔÏÊ ÐÌÁÔÆÏÒÍÅ"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"õ ×ÁÓ ÅÓÔØ ÄÙÒÁ × ÔÁÂÌÉÃÅ ÒÁÚÄÅÌÏ×, ÎÏ Ñ ÎÅ ÍÏÇÕ ÅÅ ÉÓÐÏÌØÚÏ×ÁÔØ.\n"
-"åÄÉÎÓÔ×ÅÎÎÙÊ ×ÙÈÏÄ ÓÏÓÔÏÉÔ × ÔÏÍ, ÞÔÏÂÙ ÐÅÒÅÄ×ÉÎÕÔØ ÐÅÒ×ÉÞÎÙÅ ÒÁÚÄÅÌÙ ÔÁË, "
-"ÞÔÏÂÙ ÄÙÒÁ ÛÌÁ ÓÒÁÚÕ ÚÁ ÒÁÓÛÉÒÅÎÎÙÍ (extended) ÒÁÚÄÅÌÏÍ"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "÷ÏÓÓÔÁÎÏ×ÌÅÎÉÅ ÉÚ ÆÁÊÌÁ %s ÐÒÏ×ÁÌÉÌÏÓØ %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "ïÛÉÂËÁ ÚÁÐÉÓÉ × ÆÁÊÌ %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"þÔÏ-ÔÏ ÐÌÏÈÏÅ ÐÒÏÉÓÈÏÄÉÔ ÎÁ ×ÁÛÅÍ ÄÉÓËÅ. \n"
-"ôÅÓÔ ÎÁ ÃÅÌÏÓÔÎÏÓÔØ ÄÁÎÎÙÈ ÎÅ ÐÒÏÛÅÌ. \n"
-"üÔÏ ÏÚÎÁÞÁÅÔ, ÞÔÏ ÚÁÐÉÓØ ÉÎÆÏÒÍÁÃÉÉ ÎÁ ÜÔÏÔ ÄÉÓË ÚÁËÏÎÞÉÔÓÑ ÇÏÒÏÊ ÍÕÓÏÒÁ"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ÏÂÑÚÁÔÅÌØÎÏ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "×ÁÖÎÏ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "×ÅÓØÍÁ ÖÅÌÁÔÅÌØÎÏ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ÖÅÌÁÔÅÌØÎÏ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ÍÏÖÎÏ É ÜÔÏ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "õÄÁÌÅÎÎÙÊ lpd ÓÅÒ×ÅÒ"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "óÅÔÅ×ÏÊ ÐÒÉÎÔÅÒ (ÓÏËÅÔ)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "óÅÒ×ÅÒ ÐÅÞÁÔÉ"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "áÄÒÅÓ ÕÓÔÒÏÊÓÔ×Á ÐÅÞÁÔÉ"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "ïÛÉÂËÁ ÚÁÐÉÓÉ × ÆÁÊÌ %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(ÍÏÄÕÌØ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ÓÅÒ×ÅÒÁ CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (õÍÏÌÞÁÎÉÅ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "÷ÙÂÏÒ ÔÉÐÁ ÐÏÄËÌÀÞÅÎÉÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ëÁË ÐÏÄÓÏÅÄÉÎÅÎ ×ÁÛ ÐÒÉÎÔÅÒ?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"ó ÕÄÁÌÅÎÎÙÍ ÓÅÒ×ÅÒÏÍ ÐÅÞÁÔÉ CUPS, ×ÁÍ ÎÅ ÎÕÖÎÏ ÚÄÅÓØ ÎÁÓÔÒÁÉ×ÁÔØ\n"
-"ÎÉËÁËÉÈ ÐÒÉÎÔÅÒÏ×; ÐÒÉÎÔÅÒÙ ÂÕÄÕÔ ÏÂÎÁÒÕÖÅÎÙ Á×ÔÏÍÁÔÉÞÅÓËÉ.\n"
-"åÓÌÉ ÓÏÍÎÅ×ÁÅÔÅÓØ, ×ÙÂÅÒÉÔÅ \"õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ÁÄÒÅÓ ÄÏÌÖÅÎ ÂÙÔØ × ÆÏÒÍÁÔÅ 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÄÏÌÖÅÎ ÓÏÓÔÏÑÔØ ÉÚ ÃÉÆÒ"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP ÓÅÒ×ÅÒÁ CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "ðÏÒÔ"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "îÁÓÔÒÏÊËÁ ×ÉÄÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÕÓÔÒÏÊÓÔ×..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "ðÒÏ×ÅÒÉÔØ ÐÏÒÔÙ"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "éÓÐÏÌØÚÏ×ÁÔØ Á×ÔÏÏÐÒÅÄÅÌÅÎÉÅ"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "ÎÁÊÄÅÎÏ %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "áÄÒÅÓ ÕÓÔÒÏÊÓÔ×Á ÐÅÞÁÔÉ"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "÷ÙÂÅÒÉÔÅ, Ë ËÁËÏÍÕ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÍÕ ÐÏÒÔÕ ÐÏÄËÌÀÞÅÎ ÍÏÄÅÍ."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "áÄÒÅÓ ÕÓÔÒÏÊÓÔ×Á ÐÅÞÁÔÉ"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "îÁÓÔÒÏÊËÁ"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "ïÐÃÉÉ ÕÄÁÌÅÎÎÏÇÏ ÐÒÉÎÔÅÒÁ lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"äÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÕÄÁÌÅÎÎÏÊ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ ×ÁÍ ÎÕÖÎÏ ÕËÁÚÁÔØ ÉÍÑ ÕÄÁÌÅÎÎÏÇÏ "
-"ÓÅÒ×ÅÒÁ ÐÅÞÁÔÉ É ÉÍÑ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ ÎÁ ÜÔÏÍ ÓÅÒ×ÅÒÅ, × ËÏÔÏÒÕÀ ÕÄÁÌÅÎÎÙÊ "
-"ÓÅÒ×ÅÒ ÂÕÄÅÔ ÐÏÍÅÝÁÔØ ÚÁÄÁÎÉÑ ÎÁ ÐÅÞÁÔØ."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "õÄÁÌÅÎÎÁÑ ÍÁÛÉÎÁ"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "õÄÁÌÅÎÎÁÑ ÍÁÛÉÎÁ"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "õÄÁÌÅÎÎÁÑ ÍÁÛÉÎÁ"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ïÐÃÉÉ ÐÒÉÎÔÅÒÁ SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"äÌÑ ÐÅÞÁÔÉ ÎÁ ÐÒÉÎÔÅÒÅ SMB ×ÁÍ ÎÅÏÂÈÏÄÉÍÏ ÕËÁÚÁÔØ ÉÍÑ ÈÏÓÔÁ SMB (ÎÅ ×ÓÅÇÄÁ "
-"ÓÏ×ÐÁÄÁÅÔ Ó ÉÍÅÎÅÍ × ÓÅÔÉ TCP/IP) É ÁÄÒÅÓ IP ÓÅÒ×ÅÒÁ ÐÅÞÁÔÉ, Á ÔÁËÖÅ ÉÍÑ "
-"ÒÅÓÕÒÓÁ, Ó×ÑÚÁÎÎÏÅ Ó ×ÙÂÒÁÎÎÙÍ ÐÒÉÎÔÅÒÏÍ, ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ, ÐÁÒÏÌØ É "
-"ÉÎÆÏÒÍÁÃÉÀ Ï ÒÁÂÏÞÅÊ ÇÒÕÐÐÅ."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "óÅÒ×ÅÒ SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP ÓÅÒ×ÅÒÁ SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "éÍÑ ÒÅÓÕÒÓÁ"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "òÁÂÏÞÁÑ ÇÒÕÐÐÁ"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "ïÐÃÉÉ ÐÒÉÎÔÅÒÁ NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"äÌÑ ÐÅÞÁÔÉ ÎÁ ÐÒÉÎÔÅÒ NetWare ×ÁÍ ÎÅÏÂÈÏÄÉÍÏ ÕËÁÚÁÔØ ÉÍÑ ÓÅÒ×ÅÒÁ ÐÅÞÁÔÉ "
-"NetWare (ÎÅ ×ÓÅÇÄÁ ÓÏ×ÐÁÄÁÅÔ Ó ÉÍÅÎÅÍ × ÓÅÔÉ TCP/IP) É ÉÍÑ ÏÞÅÒÅÄÉ, "
-"ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÅÊ ×ÙÂÒÁÎÎÏÍÕ ÐÒÉÎÔÅÒÕ, Á ÔÁËÖÅ ÉÍÑ ÐÏÌØÚÏ×ÁÔÅÌÑ É ÐÁÒÏÌØ."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "óÅÒ×ÅÒ ÐÅÞÁÔÉ"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "éÍÑ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "ïÐÃÉÉ ÐÒÉÎÔÅÒÁ Socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "éÍÑ ÍÁÛÉÎÙ Ó ÐÒÉÎÔÅÒÏÍ"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "éÍÑ ÍÁÛÉÎÙ Ó ÐÒÉÎÔÅÒÏÍ"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "áÄÒÅÓ ÕÓÔÒÏÊÓÔ×Á ÐÅÞÁÔÉ"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "éÍÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "ïÐÉÓÁÎÉÅ"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "íÅÓÔÏÎÁÈÏÖÄÅÎÉÅ"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "üÔÏ ×ÅÒÎÏ?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "ðÏÄËÌÀÞÅÎÉÅ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "ëÁËÏÊ Õ ×ÁÓ ÔÉÐ ÐÒÉÎÔÅÒÁ?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "èÏÔÉÔÅ ×ÙÐÏÌÎÉÔØ ÐÒÏÂÎÕÀ ÐÅÞÁÔØ?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "ðÒÏ×ÅÒÉÔØ ÐÏÒÔÙ"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "äÁ, ÎÁÐÅÞÁÔÁÔØ ÏÂÅ ÐÒÏÂÎÙÅ ÓÔÒÁÎÉÃÙ ÔÅËÓÔÁ"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "óÔÁÎÄÁÒÔÎÁÑ"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ðÒÏÂÎÙÅ ÓÔÒÁÎÉÃÙ ÏÔÐÒÁ×ÌÅÎÙ ÄÅÍÏÎÕ ÐÅÞÁÔÉ.\n"
-"ðÒÅÖÄÅ ÞÅÍ ÐÒÉÎÔÅÒ ÚÁÒÁÂÏÔÁÅÔ ÍÏÖÅÔ ÐÒÏÊÔÉ ÎÅËÏÔÏÒÏÅ ×ÒÅÍÑ.\n"
-"óÔÁÔÕÓ ÐÅÞÁÔÉ:\n"
-"%s\n"
-"\n"
-"ïÎ ÒÁÂÏÔÁÅÔ ÎÏÒÍÁÌØÎÏ?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"ðÒÏÂÎÙÅ ÓÔÒÁÎÉÃÙ ÏÔÐÒÁ×ÌÅÎÙ ÄÅÍÏÎÕ ÐÅÞÁÔÉ.\n"
-"ðÒÅÖÄÅ ÞÅÍ ÐÒÉÎÔÅÒ ÚÁÒÁÂÏÔÁÅÔ ÍÏÖÅÔ ÐÒÏÊÔÉ ÎÅËÏÔÏÒÏÅ ×ÒÅÍÑ.\n"
-"ïÎ ÒÁÂÏÔÁÅÔ ÎÏÒÍÁÌØÎÏ?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "úÁËÒÙÔØ"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "äÅÁËÔÉ×ÉÚÁÃÉÑ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "äÅÁËÔÉ×ÉÚÁÃÉÑ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "ðÁÒÁÍÅÔÒÙ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "éÍÑ ÐÒÉÎÔÅÒÁ ÄÏÌÖÎÏ ÓÏÄÅÒÖÁÔØ ÔÏÌØËÏ ÂÕË×Ù, ÃÉÆÒÙ É ÐÏÄÞÅÒËÉ×ÁÎÉÅ"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "úÁÐÕÓË ÷ÁÛÅÇÏ ÓÏÅÄÉÎÅÎÉÑ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "íÏÎÉÔÏÒ ÎÅ ÎÁÓÔÒÏÅÎ"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "ëÁËÕÀ ÓÉÓÔÅÍÕ ÐÅÞÁÔÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "÷ÙÓÏËÉÊ"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "ðÁÒÁÎÏÉÄÁÌØÎÙÊ"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "ëÁËÕÀ ÓÉÓÔÅÍÕ ÐÅÞÁÔÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "÷ÙÂÏÒ ÔÉÐÁ ÐÏÄËÌÀÞÅÎÉÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ëÁËÕÀ ÓÉÓÔÅÍÕ ÐÅÞÁÔÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "îÁÓÔÒÏÉÔØ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "ðÁÒÁÍÅÔÒÙ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "îÁÓÔÒÏÉÔØ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "èÏÔÉÔÅ ÎÁÓÔÒÏÉÔØ ÐÒÉÎÔÅÒ?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"éÍÅÀÔÓÑ ÓÌÅÄÕÀÝÉÅ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ.\n"
-"÷Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÎÏ×ÙÅ ÉÌÉ ÉÚÍÅÎÉÔØ ÓÕÝÅÓÔ×ÕÀÝÉÅ."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"éÍÅÀÔÓÑ ÓÌÅÄÕÀÝÉÅ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ.\n"
-"÷Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÎÏ×ÙÅ ÉÌÉ ÉÚÍÅÎÉÔØ ÓÕÝÅÓÔ×ÕÀÝÉÅ."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "îÏÒÍÁÌØÎÙÊ ÒÅÖÉÍ"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "èÏÔÉÔÅ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÎÁÓÔÒÏÊËÉ?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "èÏÔÉÔÅ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÎÁÓÔÒÏÊËÉ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "ðÏÄËÌÀÞÅÎÉÅ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "ðÅÞÁÔØ ÔÅÓÔÏ×ÙÈ ÓÔÒÁÎÉÃ..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "èÏÔÉÔÅ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ÎÁÓÔÒÏÊËÉ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "÷Ù ÈÏÔÉÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔØ"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "þÔÅÎÉÅ ÂÁÚÙ ÄÒÁÊ×ÅÒÏ× CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "îÁÓÔÒÏÊËÁ proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "ðÏÒÔ"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy ÄÏÌÖÎÏ ÂÙÔØ http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÄÏÌÖÅÎ ÓÏÓÔÏÑÔØ ÉÚ ÃÉÆÒ"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy ÄÏÌÖÎÏ ÂÙÔØ ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "á×ÔÏ-×ÈÏÄ"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "ðÁÒÏÌØ"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "îÅÔ ÐÁÒÏÌÑ"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "ðÁÒÏÌÉ ÎÅ ÓÏ×ÐÁÄÁÀÔ"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "îÅ ÍÏÇÕ ÄÏÂÁ×ÉÔØ ÒÁÚÄÅÌ ÎÁ _ÏÔÆÏÒÍÁÔÉÒÏ×ÁÎÎÙÊ_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "îÅ ÍÏÇÕ ÐÉÓÁÔØ × ÆÁÊÌ %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ÎÅ ÓÒÁÂÏÔÁÌ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ÎÅ ÓÒÁÂÏÔÁÌ (×ÏÚÍÏÖÎÏ, ÎÅÔ raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "îÅÄÏÓÔÁÔÏÞÎÏ ÒÁÚÄÅÌÏ× ÄÌÑ RAID ÕÒÏ×ÎÑ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"úÁÐÕÓÔÉÔØ ALSA (òÁÓÛÉÒÅÎÎÁÑ Ú×ÕËÏ×ÁÑ ÁÒÈÉÔÅËÔÕÒÁ Linux) Ú×ÕËÏ×ÕÀ ÓÉÓÔÅÍÕ"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ÐÌÁÎÉÒÏ×ÝÉË ÄÌÑ ÐÏ×ÔÏÒÑÀÝÉÈÓÑ ÐÏ ÇÒÁÆÉËÕ ËÏÍÁÎÄ."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ ÏÔÓÌÅÖÉ×ÁÎÉÑ ÓÏÓÔÏÑÎÉÑ ÂÁÔÁÒÅÊ É ×ÅÄÅÎÉÑ ÐÒÏÔÏËÏÌÁ "
-"ÞÅÒÅÚ syslog.\n"
-"ôÁËÖÅ ÍÏÖÅÔ ÂÙÔØ ÉÓÐÏÌØÚÏ×ÁÎ ÄÌÑ ×ÙËÌÀÞÅÎÉÑ ÍÁÛÉÎÙ ÐÒÉ ÓÉÌØÎÏÍ ÒÁÚÒÑÄÅ "
-"ÂÁÔÁÒÅÊ."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"úÁÐÕÓËÁÅÔ ËÏÍÁÎÄÙ, ×ÎÅÓÅÎÎÙÅ × ÒÁÓÐÉÓÁÎÉÅ ËÏÍÁÎÄÏÊ at ×Ï ×ÒÅÍÑ, ÕËÁÚÁÎÎÏÅ "
-"ÐÒÉ\n"
-"ÚÁÐÕÓËÅ at, É ×ÙÐÏÌÎÑÅÔ ÐÁËÅÔÙ ËÏÍÁÎÄ, ËÏÇÄÁ ÓÒÅÄÎÑÑ ÚÁÇÒÕÚËÁ ÄÏÓÔÁÔÏÞÎÏ "
-"ÎÉÚËÁ."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron Ñ×ÌÑÅÔÓÑ ÓÔÁÎÄÁÒÔÎÏÊ ÐÒÏÇÒÁÍÍÏÊ UNIX, ËÏÔÏÒÁÑ ÚÁÐÕÓËÁÅÔ ÕËÁÚÁÎÎÙÅ "
-"ÐÏÌØÚÏ×ÁÔÅÌÑÍ\n"
-"ÐÒÏÇÒÁÍÍÙ ÐÏ ÒÁÓÐÉÓÁÎÉÀ. vixie cron ÄÏÂÁ×ÌÑÅÔ ÎÏ×ÙÅ Ó×ÏÊÓÔ×Á Ë ÉÓÈÏÄÎÏÍÕ "
-"cron ÉÚ \n"
-"UNIX, ×ËÌÀÞÁÑ ÌÕÞÛÕÀ ÂÅÚÏÐÁÓÎÏÓÔØ É ÂÏÌÅÅ ÍÏÝÎÙÅ ÐÁÒÁÍÅÔÒÙ ÎÁÓÔÒÏÊËÉ."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ÄÏÂÁ×ÌÑÅÔ ÐÏÄÄÅÒÖËÕ ÍÙÛÉ ÄÌÑ ÐÒÉÌÏÖÅÎÉÊ, ÒÁÂÏÔÁÀÝÉÈ × ÔÅËÓÔÏ×ÏÍ ÒÅÖÉÍÅ, "
-"ÔÁËÉÈ ,ËÁË \n"
-"Midnight Commander. ðÏÄÄÅÒÖÉ×ÁÅÔÓÑ ÔÁËÖÅ ÏÐÅÒÁÃÉÉ ÍÙÛØÀ ×ÙÒÅÚÁÔØ-É-×ÓÔÁ×ÉÔØ "
-"É ×ÓÐÌÙ×ÁÀÝÉÅ ÍÅÎÀ × \n"
-"ËÏÎÓÏÌÉ."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ×ÙÐÏÌÎÑÅÔ ÐÒÏ×ÅÒËÕ ÖÅÌÅÚÁ É ÐÒÉ ÎÅÏÂÈÏÄÉÍÏÓÔÉ ÎÁÓÔÒÁÉ×ÁÅÔ \n"
-"ÎÏ×ÙÅ/ÉÚÍÅÎÉ×ÛÉÅÓÑ ÕÓÔÒÏÊÓÔ×Á."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache Ñ×ÌÑÅÔÓÑ ÓÅÒ×ÅÒÏÍ World Wide Web. ïÎ ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ ÏÂÓÌÕÖÉ×ÁÎÉÑ "
-"ÆÁÊÌÏ× HTML É CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"äÅÍÏÎ ÓÕÐÅÒÓÅÒ×ÅÒÁ ÉÎÔÅÒÎÅÔ (ÎÁÚÙ×ÁÅÍÙÊ ÏÂÙÞÎÏ inetd) ÚÁÐÕÓËÁÅÔ ÐÏ ÍÅÒÅ \n"
-"ÎÅÏÂÈÏÄÉÍÏÓÔÉ ÒÁÚÌÉÞÎÙÅ ÉÎÔÅÒÎÅÔ-ÓÅÒ×ÉÓÙ. ïÎ ÏÔ×ÅÞÁÅÔ ÚÁ ÚÁÐÕÓË ÍÎÏÇÉÈ \n"
-"ÓÅÒ×ÉÓÏ×, ×ËÌÀÞÁÑ telnet, ftp, rsh, É rlogin. ïÔËÌÀÞÅÎÉÅ inetd ÏÔËÌÀÞÉÔ \n"
-"ÔÁËÖÅ ×ÓÅ ÓÅÒ×ÉÓÙ, ÚÁ ËÏÔÏÒÙÅ ÏÎ ÏÔ×ÅÞÁÅÔ."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"úÁÐÕÓÔÉÔØ ÆÉÌØÔÒÁÃÉÀ ÐÁËÅÔÏ× ÄÌÑ Linux Ó ÑÄÒÁÍÉ ÓÅÒÉÉ 2.2, ÞÔÏÂÙ ÎÁÓÔÒÏÉÔØ\n"
-"ÓÉÓÔÅÍÕ ÚÁÝÉÔÙ ÓÅÔÉ (firewall) ÄÌÑ ÚÁÝÉÔÙ ×ÁÛÅÊ ÍÁÛÉÎÙ ÏÔ ÓÅÔÅ×ÙÈ ÁÔÁË."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"üÔÏÔ ÐÁËÅÔ ÚÁÇÒÕÖÁÅÔ ×ÙÂÒÁÎÎÕÀ ÒÁÓËÌÁÄËÕ ËÌÁ×ÉÁÔÕÒÙ × ÓÏÏÔ×ÅÔÓÔ×ÉÉ Ó \n"
-"/etc/sysconfig/keyboard.  ÷ÙÂÏÒ ÏÓÕÝÅÓÔ×ÌÑÅÔÓÑ ÐÒÉ ÐÏÍÏÝÉ ÕÔÉÌÉÔÙ "
-"kbdconfig.\n"
-"äÌÑ ÂÏÌØÛÉÎÓÔ×Á ÍÁÛÉÎ ÍÏÖÎÏ ÏÓÔÁ×ÉÔØ ×ËÌÀÞÅÎÎÙÍ."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"á×ÔÏÍÁÔÉÞÅÓËÏÅ ÆÏÒÍÉÒÏ×ÁÎÉÅ ÚÁÇÏÌÏ×ËÁ ÑÄÒÁ × /boot ÄÌÑ\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "á×ÔÏÍÁÔÉÞÅÓËÏÅ ÏÂÎÁÒÕÖÅÎÉÅ É ÎÁÓÔÒÏÊËÁ ÕÓÔÒÏÊÓÔ× ÐÒÉ ÚÁÇÒÕÚËÅ."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ÉÎÏÇÄÁ ÏÒÇÁÎÉÚÏ×Ù×ÁÅÔ ×ÙÐÏÌÎÅÎÉÅ ÒÁÚÌÉÞÎÙÈ ÚÁÄÁÞ\n"
-"×Ï ×ÒÅÍÑ ÚÁÇÒÕÚËÉ, ÄÌÑ ÐÏÄÄÅÒÖÁÎÉÑ ËÏÎÆÉÇÕÒÁÃÉÉ ÓÉÓÔÅÍÙ."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd Ñ×ÌÑÅÔÓÑ ÄÅÍÏÎÏÍ ÐÅÞÁÔÉ, ÎÅÏÂÈÏÄÉÍÙÍ ÄÌÑ ÎÏÒÍÁÌØÎÏÊ ÒÁÂÏÔÙ lpr. üÔÏ\n"
-"× ÐÅÒ×ÕÀ ÏÞÅÒÅÄØ ÓÅÒ×ÅÒ, ÒÁÓÐÒÅÄÅÌÑÀÝÉÊ ÚÁÄÁÎÉÑ ÎÁ ÐÅÞÁÔØ ÐÏ ÐÒÉÎÔÅÒÁÍ."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux ÷ÉÒÔÕÌÁØÎÙÊ óÅÒ×ÅÒ, ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ ÓÏÚÄÁÎÉÑ ×ÙÓÏËÏÐÒÏÉÚ×ÏÄÉÔÅÌØÎÙÈ "
-"ÓÅÒ×ÅÒÏ×\n"
-"Ó ÈÏÒÏÛÉÍ ÄÏÓÔÕÐÏÍ."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) Ñ×ÌÑÅÔÓÑ ÓÅÒ×ÅÒÏÍ ÄÏÍÅÎÎÙÈ ÉÍÅÎ (DNS), ËÏÔÏÒÙÊ ÉÓÐÏÌØÚÕÅÔÓÑ ÄÌÑ "
-"ÐÒÅÏÂÒÁÚÏ×ÁÎÉÑ ÉÍÅÎ ÍÁÛÉÎ × IP ÁÄÒÅÓÁ."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"íÏÎÔÉÒÕÅÔ É ÒÁÚÍÏÎÔÉÒÕÅÔ ×ÓÅ ÓÅÔÅ×ÙÅ ÆÁÊÌÏ×ÙÅ ÓÉÓÔÅÍÙ (NFS), SMB (Lan\n"
-"Manager/Windows) É NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"áËÔÉ×ÉÚÉÒÕÅÔ/äÅÁËÔÉ×ÉÚÉÒÕÅÔ ×ÓÅ ÓÅÔÅ×ÙÅ ÉÎÔÅÒÆÅÊÓÙ, ÎÁÓÔÒÏÅÎÎÙÅ ÎÁ ÚÁÐÕÓË\n"
-"ÐÒÉ ÚÁÇÒÕÚËÅ."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ÜÔÏ ÒÁÓÐÒÏÓÔÒÁÎÅÎÎÙÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÐÒÅÄÏÓÔÁ×ÌÅÎÉÑ ÄÏÓÔÕÐÁ Ë ÆÁÊÌÁÍ × "
-"ÓÅÔÑÈ TCP/IP.\n"
-"üÔÏÔ ÓÅÒ×ÉÓ ÏÂÅÓÐÅÞÉ×ÁÅÔ ÆÕÎËÃÉÏÎÁÌØÎÏÓÔØ ÓÅÒ×ÅÒÁ NFS, ÎÁÓÔÒÁÉ×ÁÅÍÏÇÏ ×\n"
-"ÞÅÒÅÚ ÆÁÊÌ /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS - ÒÁÓÐÒÏÓÔÒÁÎÅÎÎÙÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÐÒÅÄÏÓÔÁ×ÌÅÎÉÑ ÄÏÓÔÕÐÁ Ë ÆÁÊÌÁÍ × ÓÅÔÑÈ "
-"TCP/IP.\n"
-"üÔÏÔ ÓÅÒ×ÉÓ ÐÒÅÄÏÓÔÁ×ÌÑÅÔ ÍÅÈÁÎÉÚÍ ÂÌÏËÉÒÏ×ÁÎÉÑ ÆÁÊÌÏ× NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"á×ÔÏÍÁÔÉÞÅÓËÉ ×ËÌÀÞÁÔØ ËÌÁ×ÉÛÕ numlock × ËÏÎÓÏÌÉ É \n"
-"XFree ÐÒÉ ÚÁÇÒÕÚËÅ."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ðÏÄÄÅÒÖËÁ OKI 4w É ÓÏ×ÍÅÓÔÉÍÙÈ win-ÐÒÉÎÔÅÒÏ×."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"ðÏÄÄÅÒÖËÁ PCMCIA ÏÂÙÞÎÁ ÎÕÖÎÁ ÄÌÑ ÐÏÄÄÅÒÖËÉ ÓÅÔ×ÙÈ ËÁÒÔ ethernet É ÍÏÄÅÍÏ× "
-"ÎÁ ÐÏÒÔÁÔÉ×ÎÙÈ ËÏÍÐØÀÔÅÒÁÈ. ïÎÁ ÎÅ ÓÔÁÒÔÕÅÔ ÄÏ ÔÅÈ ÐÏÒ, ÐÏËÁ ÎÅ ÂÕÄÅÔ "
-"ÎÁÓÔÒÏÅÎÁ, ÔÁËÉÍ ÏÂÒÁÚÏÍ \n"
-"ÅÅ ÕÓÔÁÎÏ×ËÁ ÎÁ ÍÁÛÉÎÁÈ, ÇÄÅ ÏÎÁ ÎÅ ÎÕÖÎÁ, ÂÅÚÏÐÁÓÎÁ."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ÕÐÒÁ×ÌÑÅÔ ÓÏÅÄÉÎÅÎÉÑÍÉ RPC, ËÏÔÏÒÙÅ ÉÓÐÏÌØÚÕÀÔÓÑ ÔÁËÉÍÉ "
-"ÐÒÏÔÏËÏÌÁÍÉ\n"
-"ËÁË NFS É NIS. óÅÒ×ÅÒ portmap ÄÏÌÖÅÎ ÒÁÂÏÔÁÔØ ÎÁ ÍÁÛÉÎÁÈ, \n"
-"ËÏÔÏÒÙÅ ÆÕÎËÃÉÏÎÉÒÕÀÔ ËÁË ÓÅÒ×ÅÒÁ ÄÌÑ ÐÒÏÔÏËÏÌÏ×, ËÏÔÏÒÙÅ ÐÏÚ×ÏÌÑÀÔ "
-"ÉÓÐÏÌØÚÏ×ÁÔØ ÍÅÈÁÎÉÚÍ RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix Ñ×ÌÑÅÔÓÑ áÇÅÎÔÏÍ äÏÓÔÁ×ËÉ ðÏÞÔÙ, ÔÏ ÅÓÔØ ÐÒÏÇÒÁÍÍÏÊ, ËÏÔÏÒÁÑ \n"
-"ÐÅÒÅÍÅÝÁÅÔ ÐÏÞÔÕ Ó ÏÄÎÏÊ ÍÁÛÉÎÙ ÎÁ ÄÒÕÇÕÀ."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"óÏÈÒÁÎÑÅÔ É ×ÏÓÓÔÁÎÁ×ÌÉ×ÁÅÔ ÐÕÌ ÓÉÓÔÅÍÎÏÊ ÜÎÔÒÏÐÉÉ ÄÌÑ ÕÌÕÞÛÅÎÉÑ ËÁÞÅÓÔ×Á\n"
-"ÇÅÎÅÒÁÃÉÉ ÓÌÕÞÁÊÎÙÈ ÞÉÓÅÌ."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"îÁÚÎÁÞÁÅÔ raw-ÕÓÔÒÏÊÓÔ×Á block-ÕÓÔÒÏÊÓÔ×ÁÍ (ÔÁËÉÍ ËÁË ÒÁÚÄÅÌÙ\n"
-"ÖÅÓÔËÏÇÏ ÄÉÓËÁ), ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÔÁËÉÍÉ ÐÒÉÌÏÖÅÎÉÑÍÉ, ËÁË Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"äÅÍÏÎ routed ÄÏÐÕÓËÁÅÔ Á×ÔÏÍÁÔÉÞÅÓËÏÅ ÏÂÎÏ×ÌÅÎÉÅ ÔÁÂÌÉà IP ÍÁÒÛÒÕÔÉÚÁÃÉÉ "
-"ÞÅÒÅÚ \n"
-"ÐÒÏÔÏËÏÌ RIP. ÷ ÔÏ ×ÒÅÍÑ ËÁË RIP ÛÉÒÏËÏ ÉÓÐÏÌØÚÕÅÔÓÑ × ÎÅÂÏÌØÛÉÈ ÓÅÔÑÈ, ÄÌÑ\n"
-"ÂÏÌÅÅ ÓÌÏÖÎÙÈ ÓÅÔÅÊ ÎÕÖÎÙ ÂÏÌÅÅ ÓÌÏÖÎÙÅ ÐÒÏÔÏËÏÌÙ ÍÁÒÛÒÕÔÉÚÁÃÉÉ."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"ðÒÏÔÏËÏÌ rstat ÐÏÚ×ÏÌÑÅÔ ÐÏÌØÚÏ×ÁÔÅÌÑÍ ÓÅÔÉ ÐÏÌÕÞÁÔØ\n"
-"ÄÁÎÎÙÅ Ï ÐÒÏÉÚ×ÏÄÉÔÅÌØÎÏÓÔÉ ÌÀÂÏÊ ÍÁÛÉÎÙ ×ÄÁÎÎÏÊ ÓÅÔÉ."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"ðÒÏÔÏËÏÌ rusers ÐÏÚ×ÏÌÑÅÔ ÐÏÌØÚÏ×ÁÔÅÌÑÍ ÓÅÔÉ ÏÐÒÅÄÅÌÑÔØ, ËÔÏ ÒÁÂÏÔÁÅÔ\n"
-"ÎÁ ÄÒÕÇÏÊ ÏÔ×ÅÞÁÀÝÅÊ ÍÁÛÉÎÅ."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"ðÒÏÔÏËÏÌ rwho ÐÏÚ×ÏÌÑÅÔ ÕÄÁÌÅÎÎÏÍÕ ÐÏÌØÚÏ×ÁÔÅÌÀ ÐÏÌÕÞÉÔØ ÓÐÉÓÏË ×ÓÅÈ "
-"ÐÏÌØÚÏ×ÁÔÅÌÅÊ,\n"
-"ÒÁÂÏÔÁÀÝÉÈ ÎÁ ÍÁÛÉÎÅ Ó ÕÓÔÁÎÏ×ÌÅÎÎÙÍ ÄÅÍÏÎÏÍ rwho (ÁÎÁÌÏÇÉÞÎÏ finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "úÁÐÕÓÔÉÔØ ÐÏÄÄÅÒÖËÕ Ú×ÕËÁ ÎÁ ×ÁÛÅÊ ÍÁÛÉÎÅ"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog - ÜÔÏ ×ÏÚÍÏÖÎÏÓÔØ, ËÏÔÏÒÏÊ ÐÏÌØÚÕÀÔÓÑ ÍÎÏÇÉÅ ÄÅÍÏÎÙ ÄÌÑ ÚÁÎÅÓÅÎÉÑ\n"
-"ÓÏÏÂÝÅÎÉÊ × ÒÁÚÌÉÞÎÙÅ ÖÕÒÎÁÌÙ ÓÉÓÔÅÍÎÙÈ ÓÏÏÂÝÅÎÉÊ. õÄÏÂÎÏ, ËÏÇÄÁ syslog "
-"×ÓÅÇÄÁ ÚÁÐÕÝÅÎ."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "úÁÇÒÕÚÉÔØ ÄÒÁÊ×ÅÒÁ ÄÌÑ ×ÁÛÉÈ USB ÕÓÔÒÊÏÓÔ×."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "úÁÐÕÓËÁÅÔ X Font Server (ïÂÑÚÁÔÅÌÅÎ ÄÌÑ ÒÁÂÏÔÙ XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "÷ÙÂÅÒÉÔÅ, ËÁËÉÅ ÓÅÒ×ÉÓÙ ÄÏÌÖÎÙ Á×ÔÏÍÁÔÉÞÅÓËÉ ÚÁÐÕÓËÁÔØÓÑ ÐÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "éÎÔÅÒÎÅÔ"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "óÉÓÔÅÍÎÙÊ ÒÅÖÉÍ"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ïÐÃÉÉ ÕÄÁÌÅÎÎÏÇÏ ÐÒÉÎÔÅÒÁ lpd"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "âÁÚÁ ÄÁÎÎÙÈ"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "×ÙÐÏÌÎÅÎÉÅ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ÏÓÔÁÎÏ×ÌÅÎÏ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "óÅÒ×ÉÓÙ É ÄÅÍÏÎÙ"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"îÅÔ ÄÏÐÏÌÎÉÔÅÌØÎÏÊ ÉÎÆÏÒÍÁÃÉÉ\n"
-"Ï ÜÔÏ ÓÅÒ×ÉÓÅ. éÚ×ÉÎÉÔÅ."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "ðÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "óÔÁÔÕÓ:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "óÅËÔÏÒ"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "ïÓÔÁÌØÎÏÊ ÍÉÒ"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "äÏÓÔÕÐ × ÉÎÔÅÒÎÅÔ"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - çÒÁÆÉËÁ"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "òÁÚÒÁÂÏÔËÁ"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "ãÅÎÔÒ õÐÒÁ×ÌÅÎÉÑ"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "óÅÔÅ×ÏÊ ÉÎÔÅÒÆÅÊÓ"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "óÅÒ×ÅÒ SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "éÇÒÙ"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "üËÓÐÅÒÔ"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÁ %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"ôÁÂÌÉÃÁ ÒÁÚÄÅÌÏ× ÎÅ ÞÉÔÁÅÔÓÑ, ÏÎÁ ÓÌÉÛËÏÍ ÉÓÐÏÒÞÅÎÁ :(\n"
-"ðÏÓÔÁÒÁÀÓØ ÐÒÏÄÏÌÖÉÔØ, ÏÞÉÝÁÑ ÏÞÉÝÁÑ ÒÁÚÄÅÌÙ"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "ïÛÉÂËÁ"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "îÁÓÔÒÏÊËÁ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ×ÉÄÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "ðÏÚÄÒÁ×ÌÑÅÍ!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "äÏÂÁ×ÉÔØ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "÷ÙÂÏÒ ÇÒÕÐÐÙ ÐÁËÅÔÏ×"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "õÄÁÌÉÔØ ÏÞÅÒÅÄØ"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "õÄÁÌÉÔØ Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "ðÏÌØÚÏ×ÁÔÅÌØÓËÏÅ ÉÍÑ"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "ðÒÏ×ÅÒØÔÅ ×ÁÛÕ ÍÙÛØ"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "ðÏÐÒÏÂÕÊÔÅ ÅÝÅ ÒÁÚ"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "ðÏÐÒÏÂÕÊÔÅ ÅÝÅ ÒÁÚ"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "îÅÔ ÐÁÒÏÌÑ"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "óÏÅÄÉÎÅÎÉÅ ÐÏ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "÷ÙÂÏÒ ÔÉÐÁ ÐÏÄËÌÀÞÅÎÉÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÒÁÓËÌÁÄËÕ ×ÁÛÅÊ ËÌÁ×ÉÁÔÕÒÙ"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "ðÏÖÁÌÕÊÓÔÁ ÎÁÖÍÉÔÅ ÎÁ ÒÁÚÄÅÌ"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "ðÒÏ×ÅÒØÔÅ ×ÁÛÕ ÍÙÛØ"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "óÅÔÅ×ÏÊ ÉÎÔÅÒÆÅÊÓ"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "ðÏÌØÚÏ×ÁÔÅÌØÓËÏÅ ÉÍÑ"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "õËÁÖÉÔÅ, ËÁËÏÊ ÑÚÙË ÉÓÐÏÌØÚÏ×ÁÔØ."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÖÅÓÔËÏÇÏ ÄÉÓËÁ"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "ðÏÌØÚÏ×ÁÔÅÌØÓËÏÅ ÉÍÑ"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "ëÏÌÅÓÉËÏ"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "ëÏÌÅÓÉËÏ"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "ðÁÒÁÍÅÔÒÙ ÍÏÄÕÌÑ:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "ëÏÎÆÉÇÕÒÁÃÉÑ ÓÅÔÉ"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "îÁÓÔÒ. ÆÁÊÌÏ×ÙÈ ÓÉÓÔÅÍ"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "ðÁÒÁÍÅÔÒÙ"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "÷ÙÂÅÒÉÔÅ, Ë ËÁËÏÍÕ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÏÍÕ ÐÏÒÔÕ ÐÏÄËÌÀÞÅÎ ÍÏÄÅÍ."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "ëÏÎÆÉÇÕÒÁÃÉÑ ÓÅÔÉ"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÕËÁÖÉÔÅ ÔÉÐ ×ÁÛÅÊ ÍÙÛÉ"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ Ó ÄÉÓËÅÔÙ"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÕËÁÖÉÔÅ ÔÉÐ ×ÁÛÅÊ ÍÙÛÉ"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "äÒÕÇÉÅ"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "õÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÙ"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ ÉÚ ÆÁÊÌÁ"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ ÉÚ ÆÁÊÌÁ"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "óÐÅÃÉÁÌØÎÁÑ"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_ðÏÍÏÝØ"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- ðÒÅÄÙÄÕÝÉÊ"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "óÔÁÔÕÓ:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "÷ÏÓÓÔÁÎÏ×ÉÔØ ÉÚ ÆÁÊÌÁ"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "óÌÅÄÕÀÝÉÊ ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "÷ÙÂÏÒ ÐÁËÅÔÏ× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "õËÁÖÉÔÅ, ËÁËÏÊ ÑÚÙË ÉÓÐÏÌØÚÏ×ÁÔØ."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "õËÁÖÉÔÅ, ËÁËÏÊ ÑÚÙË ÉÓÐÏÌØÚÏ×ÁÔØ."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "õËÁÖÉÔÅ, ËÁËÏÊ ÑÚÙË ÉÓÐÏÌØÚÏ×ÁÔØ."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "óÏÈÒÁÎÉÔØ × ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "ðÒÏ×ÅÒØÔÅ ×ÁÛÕ ÍÙÛØ"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "ëÏÎÆÉÇÕÒÁÃÉÑ ÓÅÔÉ"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "ëÏÎÆÉÇÕÒÁÃÉÑ ÓÅÔÉ"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "îÁÓÔÒ. ÆÁÊÌÏ×ÙÈ ÓÉÓÔÅÍ"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ %s ÚÁ×ÅÒÛÉÌÁÓØ ÎÅÕÄÁÞÎÏ. ðÒÏÉÚÏÛÌÁ ÓÌÅÄÕÀÝÁÑ ÏÛÉÂËÁ:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "ÓÅÔÅ×ÙÈ ËÁÒÔ ÎÅ ÎÁÊÄÅÎÏ"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "çÏÔÏ×Ï"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "ðÏÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "ÏÇÒÁÎÉÞÉÔØ"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ÏÇÒÁÎÉÞÉÔØ"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "ÆÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÒÁÚÄÅÌÏ×"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "ôÏÞËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "÷ÙÂÏÒ ÒÁÚÄÅÌÏ× ÄÌÑ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "ïÆÉÓ"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "ïÔÍÅÎÉÔØ"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "õÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÙ"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "÷ÙÂÅÒÉÔÅ ÆÁÊÌ"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "îÁÞÁÌØÎÏÅ ÓÏÏÂÝÅÎÉÅ"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "îÁ ×ÁÛÅÊ ÍÁÛÉÎÅ ÎÅÔ ÓÅÔÅ×ÏÇÏ ÁÄÁÐÔÅÒÁ!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "îÁ ×ÁÛÅÊ ÍÁÛÉÎÅ ÎÅÔ ÓÅÔÅ×ÏÇÏ ÁÄÁÐÔÅÒÁ!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "÷ÙÈÏÄ ÉÚ ÐÒÏÃÅÓÓÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ × ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×ËÌÀÞÅÎÏ"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"îÁÓÔÒÏÊËÁ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÕÖÅ ÓÄÅÌÁÎÁ.\n"
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÒÁÚÄÅÌÅÎÉÅ ×ËÌÀÞÅÎÏ.\n"
-"\n"
-"þÔÏ ×Ù ÈÏÔÉÔÅ ÓÄÅÌÁÔØ?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "×ÙËÌÀÞÉÔØ"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ÕÂÒÁÔØ"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ÐÅÒÅÎÁÓÔÒÏÉÔØ"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "÷ÙËÌÀÞÅÎÉÅ ÓÅÒ×ÅÒÏ×..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "òÁÚÄÅÌÅÎÉÅ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÔÅÐÅÒØ ×ÙËÌÀÞÅÎÏ."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "òÁÚÄÅÌÅÎÉÅ ÉÎÔÅÒÎÅÔ-ÓÏÅÄÉÎÅÎÉÑ × ÄÁÎÎÙÊ ÍÏÍÅÎÔ ×ÙËÌÀÞÅÎÏ"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"îÁÓÔÒÏÊËÁ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÕÖÅ ÓÄÅÌÁÎÁ.\n"
-"÷ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÒÁÚÄÅÌÅÎÉÅ ×ÙËÌÀÞÅÎÏ.\n"
-"\n"
-"þÔÏ ×Ù ÈÏÔÉÔÅ ÓÄÅÌÁÔØ?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "×ËÌÀÞÉÔØ"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "÷ËÌÀÞÅÎÉÅ ÓÅÒ×ÅÒÏ×..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "òÁÚÄÅÌÅÎÉÅ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÔÅÐÅÒØ ×ËÌÀÞÅÎÏ."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "éÎÔÅÒÆÅÊÓ %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "îÁ ×ÁÛÅÊ ÍÁÛÉÎÅ ÎÅÔ ÓÅÔÅ×ÏÇÏ ÁÄÁÐÔÅÒÁ!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "óÅÔÅ×ÏÊ ÉÎÔÅÒÆÅÊÓ"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"÷ ÓÉÓÔÅÍÅ ÅÓÔØ ÔÏÌØËÏ ÏÄÉÎ ÎÁÓÔÒÏÅÎÎÙÊ ÓÅÔÅ×ÏÊ ÁÄÁÐÔÅÒ:\n"
-"\n"
-"%s\n"
-"\n"
-"ñ ÓÏÂÉÒÁÀÓØ ÎÁÓÔÒÏÉÔØ ÌÏËÁÌØÎÕÀ ÓÅÔØ, ÉÓÐÏÌØÚÕÑ ÜÔÏÔ ÁÄÁÐÔÅÒ."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ, ËÁËÏÊ ÓÅÔÅ×ÏÊ ÁÄÁÐÔÅÒ ÂÕÄÅÔ ÐÏÄËÌÀÞÅÎ Ë ×ÁÛÅÊ "
-"ÌÏËÁÌØÎÏÊ ÓÅÔÉ."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "íÏÎÉÔÏÒ ÎÅ ÎÁÓÔÒÏÅÎ"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "îÁÓÔÒÏÊËÁ ×ÉÄÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "îÁÓÔÒÏÊËÁ éÎÔÅÒÎÅÔ"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ÓÅÒ×ÅÒÁ CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ðÏÔÅÎÃÉÁÌØÎÙÊ ËÏÎÆÌÉËÔ ÁÄÒÅÓÏ× LAN ÏÂÎÁÒÕÖÅÎ × ÔÅËÕÝÅÊ ËÏÎÆÉÇÕÒÁÃÉÉ %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "ïÂÎÁÒÕÖÅÎÁ ÎÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ (firewall)!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"÷ÎÉÍÁÎÉÅ! ïÂÎÁÒÕÖÅÎÙ ÓÕÝÅÓÔ×ÕÀÝÉÅ ÎÁÓÔÒÏÊËÉ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÅÊ (firewall). "
-"÷ÁÍ ÍÏÇÕÔ ÐÏÔÒÅÂÏ×ÁÔØÓÑ ÎÅÂÏÌØÛÉÅ ÒÕÞÎÙÅ ÉÓÐÒÁ×ÌÅÎÉÑ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "îÁÓÔÒÏÊËÁ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "îÁÓÔÒÏÊËÁ ÓËÒÉÐÔÏ×, ÕÓÔÁÎÏ×ËÁ ÐÒÏÇÒÁÍÍ, ÚÁÐÕÓË ÓÅÒ×ÉÓÏ×..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "ðÒÏÂÌÅÍÙ Ó ÕÓÔÁÎÏ×ËÏÊ ÐÁËÅÔÁ %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"÷ÓÅ ÎÁÓÔÒÏÅÎÏ.\n"
-"ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ÒÁÚÄÅÌÑÔØ ×ÁÛÅ ÉÎÔÅÒÅÎÔ ÓÏÅÄÉÎÅÎÉÅ Ó ÄÒÕÇÉÍÉ ËÏÍÐØÀÔÅÒÁÍÉ × "
-"×ÁÛÅÊ ÌÏËÁÌØÎÏÊ ÓÅÔÉ, ÉÓÐÏÌØÚÕÑ Á×ÔÏÍÁÔÉÞÅÓËÕÀ ÎÁÓÔÒÏÊËÕ ÓÅÔÉ (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "îÁÓÔÒÏÊËÁ ÕÖÅ ÂÙÌÁ ÓÄÅÌÁÎÁ, ÎÏ ÓÅÊÞÁÓ ÏÎÁ ×ÙËÌÀÞÅÎÁ."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "îÁÓÔÒÏÊËÁ ÕÖÅ ÂÙÌÁ ÓÄÅÌÁÎÁ É ÓÅÊÞÁÓ ÏÎÁ ×ËÌÀÞÅÎÁ."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "îÁÓÔÒÏÊËÁ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÎÉËÏÇÄÁ ÎÅ ×ÙÐÏÌÎÑÌÁÓØ."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"äÏÂÒÏ ÐÏÖÁÌÏ×ÁÔØ × ÕÔÉÌÉÔÕ ÒÁÚÄÅÌÅÎÉÑ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ!\n"
-"\n"
-"%s\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ îÁÓÔÒÏÊËÁ ÄÌÑ ÚÁÐÕÓËÁ ÍÁÓÔÅÒÁ ÎÁÓÔÒÏÊËÉ."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ëÏÎÆÉÇÕÒÁÃÉÑ ÓÅÔÉ  (%d ÁÄÁÐÔÅÒÏ×)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "ðÒÏÆÉÌØ: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "õÄÁÌÉÔØ ÐÒÏÆÉÌØ..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "õÄÁÌÑÅÍÙÊ ÐÒÏÆÉÌØ:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "îÏ×ÙÊ ÐÒÏÆÉÌØ..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "éÍÑ ËÏÍÐØÀÔÅÒÁ:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "äÏÓÔÕÐ × ÉÎÔÅÒÎÅÔ"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "ôÉÐ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "ûÌÀÚ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "éÎÔÅÒÆÅÊÓ:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "óÔÁÔÕÓ:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "îÁÓÔÒÏÊËÁ ÄÏÓÔÕÐÁ × ÉÎÔÅÒÎÅÔ..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "äÒÁÊ×ÅÒ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "éÎÔÅÒÆÅÊÓ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "ðÒÏÔÏËÏÌ"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "óÔÁÔÕÓ:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "îÁÓÔÒÏÉÔØ ÌÏËÁÌØÎÕÀ ÓÅÔØ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "íÁÓÔÅÒ..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "ðÒÉÍÅÎÉÔØ"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÐÏÄÏÖÄÉÔÅ... ÷ÎÅÓÅÎÉÅ ÉÚÍÅÎÅÎÉÊ × ÎÁÓÔÒÏÊËÕ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "óÏÅÄÉÎÅÎÏ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "îÅ ÓÏÅÄÉÎÅÎÏ"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "óÏÅÄÉÎÉÔØ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "ïÔÓÏÅÄÉÎÉÔØ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"õ ×ÁÓ ÎÅÔ ÎÁÓÔÒÏÅÎÎÙÈ ÉÎÔÅÒÆÅÊÓÏ×.\n"
-"óÎÁÞÁÌÁ ÎÕÖÎÏ ÉÈ ÎÁÓÔÒÏÉÔØ ÎÁÖÁ× ÎÁ 'îÁÓÔÒÏÉÔØ'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "áÄÁÐÔÅÒ %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "ðÒÏÔËÏÌ ÚÁÇÒÕÚËÉ"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "úÁÐÕÝÅÎÏ ÐÒÉ ÚÁÇÒÕÚËÅ"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "ëÌÉÅÎÔ DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "áËÔÉ×ÎÙÊ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "áËÔÉ×ÎÙÊ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"õ ×ÁÓ ÎÅÔ ÎÉ ÏÄÎÏÇÏ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ.\n"
-"óÎÁÞÁÌÁ ÓÏÚÄÁÊÔÅ ÓÏÅÄÉÎÅÎÉÅ, ÎÁÖÁ× 'îÁÓÔÒÏÉÔØ'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "ðÁÒÁÍÅÔÒÙ"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "ûÌÀÚ"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "óÅÔÅ×ÁÑ ËÁÒÔÁ"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "ëÌÉÅÎÔ DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "îÁÓÔÒÏÊËÁ ÕÒÏ×ÅÎØ ÂÅÚÏÐÁÓÎÏÓÔÉ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ãÅÎÔÒ õÐÒÁ×ÌÅÎÉÑ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "÷ÙÂÅÒÉÔÅ ÐÒÏÇÒÁÍÍÕ, ËÏÔÏÒÙÊ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "ëÁÎÁÄÓËÉÊ (ë×ÅÂÅË)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "å×ÒÏÐÁ"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "éÓÌÁÎÄÓËÉÊ"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "å×ÒÏÐÁ"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÁÑ"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "ÉÓÐÏÌØÚÏ×ÁÎÉÅ: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÒÁÓËÌÁÄËÕ ×ÁÛÅÊ ËÌÁ×ÉÁÔÕÒÙ"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "÷Ù ÈÏÔÉÔÅ, ÞÔÏÂÙ ËÌÁ×ÉÛÁ BackSpace ÏÚÎÁÞÁÌÁ × ËÏÎÓÏÌÉ Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "óÍÅÎÉÔÅ Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"÷ÓÔÁ×ØÔÅ Cd-Rom ÐÏÄ ÎÁÚ×ÁÎÉÅÍ Installation × ÄÉÓËÏ×ÏÄ É ÎÁÖÍÉÔÅ Ok.\n"
-"åÓÌÉ Õ ×ÁÓ ÅÇÏ ÎÅÔ, ÎÁÖÍÉÔÅ ïÔÍÅÎÉÔØ (Cancel), ÞÔÏÂÙ ÉÚÂÅÖÁÔØ ÏÂÎÏ×ÌÅÎÉÑ Ó "
-"ÜÔÏÇÏ ÄÉÓËÁ."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "îÅ×ÏÚÍÏÖÎÏ ÎÁÞÁÔØ ÏÂÎÏ×ÌÅÎÉÅ !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "ïÔÏÂÒÁÖÁÔØ ÔÏÌØËÏ ÚÁ ÓÅÇÏÄÎÑ"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/æÁÊÌ/_îÏ×ÙÊ"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/æÁÊÌ/_ïÔËÒÙÔØ"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/æÁÊÌ/_óÏÈÒÁÎÉÔØ"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/æÁÊÌ/óÏÈÒÁÎÉÔØ _ëÁË"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/æÁÊÌ/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_ðÁÒÁÍÅÔÒÙ"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/ðÁÒÁÍÅÔÒÙ/ðÒÏ×ÅÒËÁ"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/ðÏÍÏÝØ"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/ðÏÍÏÝØ/_ï ÐÒÏÇÒÁÍÍÅ..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "ðÏÌØÚÏ×ÁÔÅÌØÓËÏÅ ÉÍÑ"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ÓÏÏÂÝÅÎÉÑ"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "ÚÁÐÉÓØ ÓÏÂÙÔÉÊ × ÓÉÓÔÅÍÅ"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "ÐÏÉÓË"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "õÔÉÌÉÔÁ ÍÏÎÉÔÏÒÉÎÇÁ ÚÁÐÉÓÅÊ ÓÏÂÙÔÉÊ"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "îÁÓÔÒÏÊËÉ"
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "ÓÏÏÔ×ÅÔÓÔ×ÕÅÔ"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "ËÒÏÍÅ ÓÏÏÔ×ÅÔÓÔ×ÕÀÛÉÈ"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "÷ÙÂÅÒÉÔÅ ÆÁÊÌ"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "ëÁÌÅÎÄÁÒØ"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "óÏÄÅÒÖÉÍÏÅ æÁÊÌÁ"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ðÏÖÁÌÕÊÓÔÁ ÐÏÄÏÖÄÉÔÅ, ×ÙÐÏÌÎÑÅÔÓÑ: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "æÏÒÍÁÔÉÒÏ×ÁÎÉÅ"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "îÁÓÔÒÏÊËÁ"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "óÏÈÒÁÎÉÔØ ËÁË..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÕËÁÖÉÔÅ ÔÉÐ ×ÁÛÅÊ ÍÙÛÉ"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb ÎÅ ÎÁÊÄÅÎ\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "üÍÕÌÉÒÏ×ÁÔØ ÔÒÅÔØÀ ËÎÏÐËÕ?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "÷ÙÂÅÒÉÔÅ ×ÉÄÅÏËÁÒÔÕ"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "úÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÅÊ (firewall)"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÅÊ (firewall)"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"CÉÓÔÅÍÁ ÚÁÝÉÔÙ ÓÅÔÅÊ\n"
-"\n"
-"÷Ù ÕÖÅ ÎÁÓÔÒÏÉÌÉ ÓÉÓÔÅÍÕ ÚÁÝÉÔÙ ÓÅÔÅÊ.\n"
-"îÁÖÍÉÔÅ ÎÁ îÁÓÔÒÏÉÔØ ÄÌÑ ÉÚÍÅÎÅÎÉÑ ÉÌÉ ÕÄÁÌÅÎÉÑ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"CÉÓÔÅÍÁ ÚÁÝÉÔÙ ÓÅÔÅÊ\n"
-"\n"
-"îÁÖÍÉÔÅ ÎÁ îÁÓÔÒÏÉÔØ ÄÌÑ ÓÏÚÄÁÎÉÑ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "÷ÙÂÅÒÉÔÅ ÑÚÙË"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "÷ÙÂÅÒÉÔÅ ËÌÁÓÓ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "ïÐÒÅÄÅÌÅÎÉÅ ÖÅÓÔËÏÇÏ ÄÉÓËÁ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "îÁÓÔÒÏÊËÁ ÍÙÛÉ"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "÷ÙÂÏÒ ËÌÁ×ÉÁÔÕÒÙ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "âÅÚÏÐÁÓÎÏÓÔØ"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "îÁÓÔÒ. ÆÁÊÌÏ×ÙÈ ÓÉÓÔÅÍ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "ÆÏÒÍÁÔÉÒÏ×ÁÎÉÅ ÒÁÚÄÅÌÏ×"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "÷ÙÂÏÒ ÐÁËÅÔÏ× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "õÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÙ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "äÏÂÁ×ÉÔØ ÐÏÌØÚÏ×ÁÔÅÌÑ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÔÉ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "îÁÓÔÒÏÊËÁ ÓÅÒ×ÉÓÏ×"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "õÓÔÁÎÏ×ËÁ ÍÅÎÅÄÖÅÒÁ ÚÁÇÒÕÚËÉ"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "óÏÚÄÁÔØ ÚÁÇÒÕÚ. ÄÉÓË"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "îÁÓÔÒÏÊËÁ X Window"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "õÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÙ"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "÷ÙÈÏÄ ÉÚ ÐÒÏÃÅÓÓÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ÔÏÎËÁÑ ÎÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ\n"
-"\n"
-"úÄÅÓØ ÎÁÓÔÒÁÉ×ÁÅÔÓÑ ÐÅÒÓÏÎÁÌØÎÁÑ ÓÉÓÔÅÍÁ ÄÌÑ ÜÔÏÊ Mandrake Linux ÍÁÛÉÎÙ.\n"
-"äÌÑ ÓÏÚÄÁÎÉÑ ÓÐÅÃÉÁÌØÎÏÊ ÍÏÝÎÏÊ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÉ, ÏÂÒÁÔÉÔÅ ×ÎÉÍÁÎÉÅ ÎÁ\n"
-"ÓÐÅÃÉÁÌÉÚÉÒÏ×ÁÎÎÙÊ ÄÉÓÔÒÉÂÕÔÉ× MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"÷ÁÍ ÂÕÄÅÔ ÚÁÄÁÎÏ ÎÅÓËÏÌØËÏ ×ÏÐÒÏÓÏ× Ï ÔÏÍ, Ë ËÁËÉÍ ÓÅÒ×ÉÓÁÍ ÍÏÖÎÏ ÂÕÄÅÔ "
-"ÐÏÄÓÏÅÄÉÎÑÔØÓÑ\n"
-"ÉÚ ÉÎÔÅÒÎÅÔÁ. ðÒÏÄÕÍÙ×ÁÊÔÅ ÔÝÁÔÅÌØÎÏ ÏÔ×ÅÔÙ\n"
-", ÔÁË ËÁË ×ÏÐÒÏÓ ÂÅÚÏÐÁÓÎÏÓÔÉ ×ÁÛÅÊ ÍÁÛÉÎÙ - ÜÔÏ ×ÁÖÎÏ.\n"
-"\n"
-"ðÏÖÁÌÕÊÓÔÁ, ÅÓÌÉ ×Ù × ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÎÅ ÉÓÐÏÌØÚÕÅÔÅ ËÁËÏÊ-ÌÉÂÏ ÉÚ ÜÔÉÈ "
-"ÓÅÒ×ÉÓÏ×, ÚÁËÒÏÊÔÅ\n"
-"ÅÇÏ ÓÉÓÔÅÍÏÊ ÚÁÝÉÔÙ ÏÔ ÄÏÓÔÕÐÁ Ë ÎÅÍÕ ÉÚÉÎÔÅÒÎÅÔÁ. ÷Ù ÍÏÖÅÔÅ ÉÚÍÅÎÉÔØ ÜÔÕ "
-"ÎÁÓÔÒÏÊËÕ ÐÏÚÖÅ\n"
-"× ÌÀÂÏÅ ×ÒÅÍÑ!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"éÓÐÏÌØÚÕÅÔÅ ÌÉ ×Ù ÎÁ ÜÔÏÊ ÍÁÛÉÎÅ web ÓÅÒ×ÅÒ, ËÏÔÏÒÙÊ ÄÏÌÖÅÎ ÂÙÔØ ×ÉÄÅÎ\n"
-"ÉÚ ÉÎÔÅÒÎÅÔÁ? åÓÌÉ ×Ù ÉÓÐÏÌØÚÕÅÔÅ web ÓÅÒ×ÅÒ, ÄÏÓÔÕÐ Ë ËÏÔÏÒÏÍÕ ÎÕÖÅÎ ÔÏÌØËÏ "
-"Ó ÜÔÏÊ\n"
-"ÍÁÛÉÎÙ, ×Ù ÍÏÖÅÔÅ ÓÐÏËÏÊÎÏ ÏÔ×ÅÔÉÔØ îÅÔ ÎÁ ÜÔÏÔ ×ÏÐÒÏÓ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"éÓÐÏÌØÚÕÅÔÅ ÌÉ ×Ù ÓÅÒ×ÅÒ ÉÍÅÎ (DNS) ÎÁ ÜÔÏÊ ÍÁÛÉÎÅ? åÓÌÉ ×Ù ÎÅ ÅÇÏ "
-"ÎÁÓÔÒÁÉ×ÁÌÉ\n"
-"ÄÌÑ ×ÙÄÁÞÉ ÉÎÆÏÍÁÒÃÉÉ ÏÂ IP É ÚÏÎÁÈ ÄÌÑ ×ÓÅÇÏ ÉÎÔÅÒÎÅÔÁ, ÐÏÖÁÌÕÊÓÔÁ,\n"
-"ÏÔ×ÅÔØÔÅ îÅÔ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"èÏÔÉÔÅ ÌÉ ×Ù ÒÁÚÒÅÛÉÔØ ×ÈÏÄÑÝÉÅ Secure Shell (ssh) ÓÏÅÄÉÎÅÎÉÑ? üÔÏ\n"
-"ÚÁÍÅÎÁ ÐÒÏÇÒÁÍÍÅ telnet, ËÏÔÏÒÕÀ ×Ù, ×ÏÚÍÏÖÎÏ, ÚÁÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÄÌÑ "
-"×ÈÏÄÁ.\n"
-"åÓÌÉ ×Ù ÓÅÊÞÁÓ ÉÓÐÏÌØÚÕÅÔÅ, ×Ù ÏÂÑÚÁÔÅÌØÎÏ ÄÏÌÖÎÙ ÐÅÒÅÊÔÉ ÎÁ ssh. ÄÁÎÎÙÅ × "
-"telnet ÎÅ\n"
-" ÛÉÆÒÕÀÔÓÑ -- ÐÏÜÔÏÍÕ ÎÅËÏÔÏÒÙÅ ×ÚÌÏÍÝÉËÉ ÍÏÇÕÔ ÕËÒÁÓÔØ ×ÁÛ ÐÁÒÏÌØ, ÅÓÌÉ ×Ù "
-"ÉÓÐÏÌØÚÕÅÔÅ telnet.\n"
-"äÁÎÎÙÅ × ssh ÚÁÛÉÆÒÏ×ÁÎÙ É ÎÅ ÄÏÐÕÓËÁÀÔ ÔÁËÏÇÏ ÐÏÄÓÌÕÛÉ×ÁÎÉÑ."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"èÏÔÉÔÅ ÌÉ ×Ù ÒÁÚÒÅÛÉÔØ ×ÈÏÄÑÝÉÅ ÓÏÅÄÉÎÅÎÉÑ telnet?\n"
-"üÔÏ Ó×ÅÒÈÎÅÂÅÚÏÐÁÓÎÏ, ËÁË ÍÙ ÏÂØÑÓÎÑÌÉ × ÐÒÅÄÙÄÕÝÅÍ ÜËÒÁÎÅ. íÙ\n"
-"ÎÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÍ ÏÔ×ÅÔÉÔ ÚÄÅÓØ No É ÉÓÐÏÌØÚÏ×ÁÔØ ssh ×ÍÅÓÔÏ \n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"éÓÐÏÌØÚÕÅÔÅ ÌÉ ×Ù FTP ÓÅÒ×ÅÒ, Ë ËÏÔÏÒÏÍÕ ÈÏÔÉÔÅ ÐÒÅÄÏÓÔÁ×ÌÑÔØ ÄÏÓÔÕÐ\n"
-"ÉÚ ÉÎÔÅÒÎÅÔÁ? åÓÌÉ ÄÁ, ÔÏ ÍÙ ÎÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÍ ÉÓÐÏÌØÚÏ×ÁÔØ ÅÇÏ "
-"ÔÏÌØËÏ ÄÌÑ\n"
-"áÎÏÎÉÍÎÏÊ ÐÅÒÅÄÁÞÉ ÄÁÎÎÙÈ. ÷ÓÅ ÐÁÒÏÌÉ ÐÏÓÙÌÁÅÍÙÅ ÓÅÒ×ÅÒÏÍ FTP ÍÏÇÕÔ ÂÙÔØ "
-"ÕËÒÁÄÅÎÙ\n"
-"×ÚÌÏÍÝÉËÁÍÉ, ÐÏÓËÏÌØËÕ FTP ÏÂÙÞÎÏ ÎÅ ÉÓÐÏÌØÚÕÅÔ ÛÉÆÒÏ×ÁÎÉÅ ÐÒÉ ÐÅÒÅÄÁÞÅ "
-"ÐÁÒÏÌÅÊ.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"éóÐÏÌØÚÕÅÔÅ ÌÉ ×Ù ÐÏÞÔÏ×ÙÊ ÓÅÒ×ÅÒ ÎÁ ÜÔÏÊ ÍÁÛÉÎÅ? åÓÌÉ ×Ù ÏÔÐÒÁ×ÌÑÅÔÅ ×ÁÛÉ \n"
-"ÓÏÏÂÝÅÎÉÑ ÞÅÒÅÚ ÐÒÏÇÒÁÍÍÕ pine, mutt ÉÌÉ ÌÀÂÏÇÏ ÄÒÕÇÏÇÏ ÔÅËÓÔÏ×ÏÇÏ ÐÏÞÔÏ×ÏÇÏ "
-"ËÌÉÅÎÔÁ,\n"
-"ÔÏ ÓËÏÒÅÅ ×ÓÅÇÏ - ÄÁ. éÎÁÞÅ, ÚÁËÒÏÊÔÅ ÅÇÏ ÓÉÓÔÅÍÏÊ ÚÁÝÉÔÙ ÓÅÔÉ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"éÓÐÏÌØÚÕÅÔÅ ÌÉ ×Ù ÎÁ ÜÔÏÊ ÍÁÛÉÎÅ ÓÅÒ×ÅÒÁ POP ÉÌÉ IMAP? üÔÏ ÍÏÖÅÔ ÂÙÔØ "
-"ÉÓÐÏÌØÚÏ×ÁÎÏ\n"
-"ÄÌÑ ÈÒÁÎÅÎÉÑ ÐÏÞÔÏ×ÙÈ ÕÞÅÔÎÙÈ ÚÁÐÉÓÅÊ ÄÌÑ ÐÏÞÔÙ ÂÅÚ web ÉÎÔÅÒÆÅÊÓÁ ÞÅÒÅÚ  \n"
-"ÜÔÕ ÍÁÛÉÎÕ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"÷Ù ÉÓÐÏÌØÚÕÅÔÅ ÑÄÒÏ 2.2. åÓÌÉ ×ÁÛ IP ÁÄÒÅÓ × ÓÅÔÉ\n"
-"Á×ÔÏÍÁÔÉÞÅÓËÉ ÎÁÓÔÒÁÉ×ÁÅÔÓÑ ÄÏÍÁ ÉÌÉ × ÏÆÉÓÅ \n"
-"(Á×ÔÏÍÁÔÉÞÅÓËÉ ÐÒÉÓ×ÁÉ×ÁÅÔÓÑ), ÔÏÇÄÁ ÎÕÖÎÏ ÜÔÏ ÒÁÚÒÅÛÉÔØ. üÔÏ ÉÍÅÎÎÏ ÔÏÔ\n"
-"ÓÌÕÞÁÊ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"÷ÒÅÍÑ ÎÁ ×ÁÛÅÍ ËÏÍÐØÀÔÅÒÅ ÓÉÎÈÒÏÎÉÚÉÒÕÅÔÓÑ ÐÏ ÄÒÕÇÏÍÕ ËÏÍÐØÀÔÅÒÕ?\n"
-"ïÂÙÞÎÏ ÜÔÏ ÉÓÐÏÌØÚÕÅÔÓÑ ÓÒÅÄÎÅÇÏ ÒÁÚÍÅÒÁ Unix/Linux ÏÒÇÁÎÉÚÁÃÉÑÍÉ\n"
-"ÄÌÑ ÓÉÎÈÒÏÎÉÚÁÃÉÉ ×ÒÅÍÅÎÉ ÐÒÉ ×ÅÄÅÎÉÉ ÖÕÒÎÁÌÏ× É ÔÏÍÕ ÐÏÄÏÂÎÏÇÏ. åÓÌÉ ×Ù ÎÅ "
-"ÒÁÂÏÔÁÅÔÅ\n"
-"× ÂÏÌØÛÏÍ ÏÆÉÓÅ É ÎÉËÏÇÄÁ ÎÅ ÓÌÙÛÁÌÉ ÏÂ ÜÔÏÍ, ÓËÏÒÅÅ ×ÓÅÇÏ, ÜÔÏ ÎÅ "
-"ÐÒÏÉÓÈÏÄÉÔ \n"
-"."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"îÁÓÔÒÏÊËÁ ÚÁ×ÅÒÛÅÎÁ. íÏÖÎÏ ÚÁÐÉÓÁÔØ ÉÚÍÅÎÅÎÉÑ ÎÁ ÄÉÓË?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "îÅ×ÏÚÍÏÖÎÏ ÏÔËÒÙÔØ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "ïÛÉÂËÁ ÏÔËÒÙÔÉÑ %s ÄÌÑ ÚÁÐÉÓÉ: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "îÁÓÔÒÏÊËÁ ÓÉÓÔÅÍÙ ÚÁÝÉÔÙ ÓÅÔÅÊ (firewall)"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "ðÏÖÁÌÕÊÓÔÁ, ÐÏÄÏÖÄÉÔÅ, ÐÏÄÇÏÔÁ×ÌÉ×ÁÅÔÓÑ ÕÓÔÁÎÏ×ËÁ"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "óÅÔÅ×ÏÊ ËÏÍÐØÀÔÅÒ (ËÌÉÅÎÔ)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ÓÅÒ×ÅÒ, SMB ÓÅÒ×ÅÒ, Proxy ÓÅÒ×ÅÒ, ssh ÓÅÒ×ÅÒ"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "ïÆÉÓ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "òÁÂÏÞÁÑ ÓÔÁÎÃÉÑ Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ×ÁÛÅÇÏ Palm Pilot ÉÌÉ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "òÁÂÏÞÁÑ ÓÔÁÎÃÉÑ"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "óÉÓÔÅÍÁ ÚÁÝÉÔÙ ÓÅÔÅÊ/íÁÒÛÒÕÔÉÚÁÔÏÒ"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "óÅÒ×ÅÒ ÉÍÅÎ (DNS) É ÓÅÒ×ÅÒ NIS"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"ïÆÉÓÎÙÅ ÐÒÏÇÒÁÍÍÙ: ÔÅÓÔÏ×ÙÅ ÐÒÏÃÅÓÓÏÒÙ (kword, abiword), ÜÌÅËÔÒÏÎÎÙÅ ÔÁÂÌÉÃÙ "
-"(kspread, gnumeric), ÐÒÏÓÍÏÔÒÝÉËÉ pdf, É Ô.Ä."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "ú×ÕËÏ×ÙÅ ÐÒÏÇÒÁÍÍÙ: ÐÌÅÊÅÒÙ mp3 ÉÌÉ MIDI, ÍÉËÛÅÒÙ, É Ô.Ä."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "ëÎÉÇÉ É HowTo Ï Linux É Ó×ÏÂÏÄÎÏÍ ÐÒÏÇÒÁÍÍÎÏÍ ÏÂÅÓÐÅÞÅÎÉÉ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "òÁÂÏÞÁÑ ÓÔÁÎÃÉÑ KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ÄÒÕÇÉÅ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - ÷ÉÄÅÏ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "îÁÂÏÒ ÐÒÏÇÒÁÍÍ ÄÌÑ ÐÏÞÔÙ, ÎÏ×ÏÓÔÅÊ, web, ÐÅÒÅÄÑÞÉ ÆÁÊÌÏ× É ÞÁÔÁ"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "âÁÚÁ ÄÁÎÎÙÈ"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "óÅÒ×ÅÒ ÂÁÚ ÄÁÎÎÙÈ PostgreSQL ÉÌÉ MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "ðÒÏÇÒÁÍÍÙ, ÕÐÒÏÝÁÀÝÉÅ ÎÁÓÔÒÏÊËÕ ×ÁÛÅÇÏ ËÏÍÐØÀÔÅÒÁ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - ú×ÕË"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "õÔÉÌÉÔÙ"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "äÏËÕÍÅÎÔÁÃÉÑ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ËÏÎÓÏÌÉ"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "ðÏÞÔÏ×ÙÊ ÓÅÒ×ÅÒ Postfix, ÓÅÒ×ÅÒ ÎÏ×ÏÓÔÅÊ Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "óÔÁÎÃÉÑ ÉÎÔÅÒÎÅÔ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "íÕÌØÔÉÍÅÄÉÁ ÓÔÁÎÃÉÑ"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "îÁÓÔÒÏÊËÁ ÌÏËÁÌØÎÏÊ ÓÅÔÉ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "åÝÅ çÒÁÆÉÞÅÓËbÅ chtls (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"óÒÅÄÁ K Desktop, ÏÓÎÏ×ÎÁÑ ÇÒÁÆÉÞÅÓËÁÑ ÓÒÅÄÁ Ó ÎÁÂÏÒÏÍ ÓÏÏÔ×ÅÔÓ×ÕÀÝÉÈ ÐÒÏÇÒÁÍÍ"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "çÒÁÆÉÞÅÓËÁÑ ÓÒÅÄÁ"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ÓÏÚÄÁÎÉÑ É ÚÁÐÉÓÉ CD ÄÉÓËÏ×"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "ïÆÉÓÎÁÑ ÒÁÂÏÞÁÑ ÓÔÁÎÃÉÑ"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "óÅÒ×ÅÒ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, É Ô.Ä."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "çÒÁÆÉÞÅÓËÉÅ ÐÒÏÇÒÁÍÍÙ, ÔÁËÉÅ ËÁË The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "ÂÉÂÌÉÏÔÅËÁ C É C++, ÐÒÏÇÒÁÍÍÙ É ÆÁÊÌÙ include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "óÅÔÅ×ÏÊ ÓÅÒ×ÅÒ"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "ðÏÞÔÁ/ðÒÏÇÒÁÍÍÙ ÄÌÑ ÒÁÂÏÔÙ × ÇÒÕÐÐÅ/îÏ×ÏÓÔÉ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "éÇÒÏ×ÁÑ ÓÔÁÎÃÉÑ"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "÷ÉÄÅÏ-ÐÌÅÊÅÒÙ É ÒÅÄÁËÔÏÒÙ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - çÒÁÆÉËÁ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ÒÁÚ×ÌÅÞÅÎÉÑ: ÉÇÒÙ É Ô.Ä."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"îÁÂÏÒ ÐÒÏÇÒÁÍÍ ÄÌÑ ÞÔÅÎÉÑ É ÏÔÐÒÁ×ËÉ ÐÏÞÔÙ É ÎÏ×ÏÓÔÅÊ (pine, mutt, tin..) É "
-"ÐÒÏÓÍÏÔÒÁ Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "áÒÈÉ×ÉÒÏ×ÁÎÉÅ, ÜÍÕÌÑÃÉÑ, ÏÔÓÌÅÖÉ×ÁÎÉÅ"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "ìÉÞÎÙÅ ÆÉÎÁÎÓÙ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "çÒÁÆÉÞÅÓËÁÑ ÓÒÅÄÁ Ó ÎÁÂÏÒÏÍ ÄÒÕÖÅÓÔ×ÅÎÎÙÈ ÐÒÏÇÒÁÍÍ "
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ëÌÉÅÎÔÙ ÄÌÑ ÒÁÚÎÙÈ ÐÒÏÔÏËÏÌÏ×, ×ËÌÀÞÁÑ ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "ûÌÀÚ ÉÎÔÅÒÎÅÔ"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ÐÒÏÉÇÒÙ×ÁÎÉÑ/ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ Ú×ÕËÁ É ×ÉÄÅÏ"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "äÒÕÇÉÅ ÇÒÁÆÉÞÅÓËÉÅ ÓÒÅÄÙ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "òÅÄËÁÔÏÒÙ, ÏÂÏÌÏÞËÉ, ÆÁÊÌÏ×ÙÅ ÕÔÉÌÉÔÙ, ÔÅÒÍÉÎÁÌÙ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ðÒÏÇÒÁÍÍÙ ÄÌÑ ÕÐÒÁ×ÌÅÎÉÑ ÆÉÎÁÎÓÁÍÉ, ÔÁËÉÅ ËÁË gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "õÐÒÁ×ÌÅÎÉÅ ÌÉÞÎÏÊ ÉÎÆÏÒÍÁÃÉÅÊ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "íÕÌØÔÉÍÅÄÉÁ - úÁÐÉÓØ CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "îÁÕÞÎÁÑ ÒÁÂÏÞÁÑ ÓÔÁÎÃÉÑ"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "ïÔÍÅÎÉÔØ"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "çÏÔÏ×Ï"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "÷ÙÂÅÒÉÔÅ ÐÏÌØÚÏ×ÁÔÅÌÑ ÐÏ ÕÍÏÌÞÁÎÉÀ:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ÚÁÄÁ×ÁÔØ ÐÁÒÁÍÅÔÒÙ ÄÌÑ ÍÏÄÕÌÑ %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ÏÛÉÂËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ"
-
-#~ msgid "Low"
-#~ msgstr "îÉÚËÉÊ"
-
-#~ msgid "Medium"
-#~ msgstr "óÒÅÄÎÉÊ"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "îÁ ÜÔÏÍ ÕÒÏ×ÎÅ ÂÅÚÏÐÁÓÎÏÓÔÉ ÅÓÔØ ÒÑÄ ÕÌÕÞÛÅÎÉÊ, × ÐÅÒ×ÕÀ ÏÞÅÒÅÄØ\n"
-#~ "Õ×ÅÌÉÞÉÌÏÓØ ËÏÌÉÞÅÓÔ×Ï ÐÒÏ×ÅÒÏË É ÐÒÅÄÕÐÒÅÖÄÅÎÉÊ."
-
-#~ msgid "Boot mode"
-#~ msgstr "òÅÖÉÍ ÚÁÇÒÕÚËÉ"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "üËÓÐÅÒÔ"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux ÏÔÓÞÉÔÙ×ÁÅÔ ×ÒÅÍÑ × GMT (ÐÏ çÒÉÎ×ÉÞÕ) É ÐÅÒÅ×ÏÄÉÔ ÅÇÏ × "
-#~ "ÍÅÓÔÎÏÅ\n"
-#~ "×ÒÅÍÑ × ÓÏÏÔ×ÅÔÓÔ×ÉÉ Ó ×ÙÂÒÁÎÎÙÍ ÞÁÓÏ×ÙÍ ÐÏÑÓÏÍ."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "ðÏÄÓÏÅÄÉÎÉÔØÓÑ Ë éÎÔÅÒÎÅÔ"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "ïÔÓÏÅÄÉÎÉÔØÓÑ ÏÔ éÎÔÅÒÎÅÔ"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "îÁÓÔÒÏÉÔØ ÓÅÔÅ×ÏÅ ÓÏÅÄÉÎÅÎÉÅ (ÌÏËÁÌØÎÁÑ ÓÅÔØ ÉÌÉ ÉÎÔÅÒÎÅÔ)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "îÁ ËÁËÏÊ ÄÉÓË ÈÏÔÉÔÅ ÐÅÒÅÍÅÓÔÉÔØ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "éÎÆÏÒÍÁÃÉÑ"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "òÁÂÏÞÁÑ ÓÔÁÎÃÉÑ Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "áÕÔÅÎÔÉÆÉËÁÃÉÑ"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "ÐÏÌØÚÏ×ÁÔÅÌØ"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "ðÏÖÁÌÕÊÓÔÁ, ÕËÁÖÉÔÅ ÔÉÐ ×ÁÛÅÊ ÍÙÛÉ"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "÷ÙÈÏÄ"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "á×ÔÏÍÏÎÔÉÒÏ×ÁÎÉÅ ÓßÅÍÎÙÈ ÎÏÓÉÔÅÌÅÊ"
-
-#~ msgid "Active"
-#~ msgstr "áËÔÉ×ÎÙÊ"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "îÅÔ"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "ðÒÉÎÔÅÒ ÍÏÄÅÌÉ \"%s\" ÏÂÎÁÒÕÖÅÎ ÎÁ "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ"
-
-#~ msgid "Printer Device"
-#~ msgstr "ðÒÉÎÔÅÒ"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "õÄÁÌÅÎÎÙÊ CUPS ÓÅÒ×ÅÒ"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "óÉÓÔÅÍÎÙÊ ÒÅÖÉÍ"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "äÒÕÇÉÅ"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÒÁÓËÌÁÄËÕ ×ÁÛÅÊ ËÌÁ×ÉÁÔÕÒÙ"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "ðÏÖÁÌÕÊÓÔÁ ÎÁÖÍÉÔÅ ÎÁ ÒÁÚÄÅÌ"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "ôÉÐ: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "ðÌÏÈÏÊ ÆÁÊÌ Ó ÒÅÚÅÒ×ÎÏÊ ËÏÐÉÅÊ"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "îÁÓÔÒÏÊËÁ X Window"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "ðÒÉÎÔÅÒ"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "ïÔÍÅÎÁ"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "ïË"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "úÁËÒÙÔØ"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "úÁÐÕÓË ÷ÁÛÅÇÏ ÓÏÅÄÉÎÅÎÉÑ..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "úÁËÒÙÔÉÅ ×ÁÛÅÇÏ ÓÏÅÄÉÎÅÎÉÑ..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "óÏÅÄÉÎÅÎÉÅ ÎÅ ÚÁËÒÙÔÏ.\n"
-#~ "ðÏÐÒÏÂÕÊÔÅ ÚÁËÒÙÔØ ÅÇÏ ×ÒÕÞÎÕÀ\n"
-#~ "ÚÁÐÕÓÔÉ× /etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "ÐÏÄ root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "ôÅÐÅÒØ ÓÉÓÔÅÍÁ ÏÔÓÏÅÄÉÎÅÎÁ."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "÷ÙÂÅÒÉÔÅ ÖÅÌÁÔÅÌØÎÙÊ ÒÁÚÍÅÒ ÕÓÔÁÎÏ×ËÉ"
-
-#~ msgid "Total size: "
-#~ msgstr "ïÂÝÉÊ ÒÁÚÍÅÒ: "
-
-#~ msgid "Please wait, "
-#~ msgstr "ðÏÄÏÖÄÉÔÅ, ÐÏÖÁÌÕÊÓÔÁ, "
-
-#~ msgid "Total time "
-#~ msgstr "ïÂÝÅÅ ×ÒÅÍÑ "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "éÓÐÏÌØÚÏ×ÁÔØ ÓÕÝÅÓÔ×ÕÀÝÕÀ ÎÁÓÔÒÏÊËÕ ÄÌÑ X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "ë ËÁËÏÍÕ ÕÓÔÒÏÊÓÔ×Õ ÐÏÄËÌÀÞÅÎ ×ÁÛ ÐÒÉÎÔÅÒ \n"
-#~ "(ÐÏÍÎÉÔÅ? - /dev/lp0 ÜË×É×ÁÌÅÎÔÅÎ LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "÷ÎÉÍÁÎÉÅ, ÓÅÔÅ×ÏÊ ÁÄÁÐÔÅÒ ÕÖÅ ÎÁÓÔÒÏÅÎ. ñ ÅÇÏ ÐÅÒÅËÏÎÆÉÇÕÒÉÒÕÀ."
-
-#~ msgid "New"
-#~ msgstr "îÏ×ÙÊ"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "õÄÁÌÅÎÎÁÑ ÏÞÅÒÅÄØ"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "ðÏÖÁÌÕÊÓÔÁ ÎÁÖÍÉÔÅ ÎÁ ÒÁÚÄÅÌ"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "îÅÏÐÒÅÄÅÌÅÎÎÏÓÔØ (%s), ÂÕÄØÔÅ ÐÏÔÏÞÎÅÅ\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (ÕÍÏÌÞÁÎÉÅ %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "÷ÁÛ ×ÙÂÏÒ? (ÕÍÏÌÞÁÎÉÅ %s ××ÅÄÉÔÅ 'none' ÐÒÉ ÏÔÓÕÔÓÔ×ÉÉ) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ÎÅ×ÏÚÍÏÖÎÏ ÏÔËÒÙÔØ ÄÌÑ ÞÔÅÎÉÑ /etc/sysconfig/autologin : %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "÷Ù ÈÏÔÉÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔØ"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "÷Ù ÓÏÇÌÁÓÎÙ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "óÏÂÉÒÁÀÓØ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔÅ×ÏÅ ÕÓÔÒÏÊÓÔ×Ï:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "óÏÂÉÒÁÀÓØ ÐÅÒÅÚÁÐÕÓÔÉÔØ ÓÅÔÅ×ÏÅ ÕÓÔÒÏÊÓÔ×Ï %s. ÷Ù ÓÏÇÌÁÓÎÙ?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "åÓÌÉ ÎÅ ÚÎÁÅÔÅ ÔÏÞÎÏ ÄÒÕÇÏÊ ×ÁÒÉÁÎÔ, ÔÏ ÏÂÙÞÎÙÍ ×ÙÂÏÒÏÍ Ñ×ÌÑÅÔÓÑ \"/dev/"
-#~ "hda\"\n"
-#~ "(IDE ÍÁÓÔÅÒ ÄÉÓË ÎÁ ÐÅÒ×ÏÍ ËÁÎÁÌÅ) ÉÌÉ \"/dev/sda\" (ÐÅÒ×ÙÊ SCSI ÄÉÓË)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "÷ÙÂÅÒÉÔÅ ÐÏÌØÚÏ×ÁÔÅÌÑ ÐÏ ÕÍÏÌÞÁÎÉÀ:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "ðÒÏ×ÅÒØÔÅ ×ÁÛÕ ÍÙÛØ ÚÄÅÓØ."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "÷ÙÂÅÒÉÔÅ ÐÒÅÄÐÏÞÔÉÔÅÌØÎÙÊ ÑÚÙË ÄÌÑ ÕÓÔÁÎÏ×ËÉ É ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÓÉÓÔÅÍÙ."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "÷ÁÍ ÎÅÏÂÈÏÄÉÍÏ ÐÒÉÎÑÔØ ÕÓÌÏ×ÉÑ ÌÉÃÅÎÚÉÉ ÄÌÑ ÐÒÏÄÏÌÖÅÎÉÑ ÕÓÔÁÎÏ×ËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÁÖÍÉÔÅ \"ðÒÉÎÑÔØ\" ÅÓÌÉ ×Ù ÓÏÇÌÁÓÎÙ Ó ÕÓÌÏ×ÉÑÍÉ ÌÉÃÅÎÚÉÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÁÖÍÉÔÅ \"ïÔËÁÚÁÔØÓÑ\" ÅÓÌÉ ×Ù ÎÅ ÓÏÇÌÁÓÎÙ Ó ÅÅ ÕÓÌÏ×ÉÑÍÉ. õÓÔÁÎÏ×ËÁ "
-#~ "ÂÕÄÅÔ ÐÒÅÒ×ÁÎÁ ÂÅÚ ÉÚÍÅÎÅÎÉÑ ×ÁÛÅÊ ÔÅËÕÝÅÊ\n"
-#~ "ËÏÎÆÉÇÕÒÁÃÉÉ."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "÷ÙÂÅÒÉÔÅ ÉÚ ÐÒÉ×ÅÄÅÎÎÏÇÏ ÓÐÉÓËÁ ÒÁÓËÌÁÄËÕ, ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÕÀ ×ÁÛÅÊ "
-#~ "ËÌÁ×ÉÁÔÕÒÅ"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ, ÞÔÏÂÙ ÄÒÕÇÉÅ ÑÚÙËÉ (ËÒÏÍÅ ×ÙÂÒÁÎÎÙÈ \n"
-#~ "× ÎÁÞÁÌÅ ÕÓÔÁÎÏ×ËÉ) ÂÙÌÉ ÄÏÓÔÕÐÎÙ ÐÏÓÌÅ ÏËÏÎÞÁÎÉÑ ÕÓÔÁÎÏ×ËÉ, ÐÏÖÁÌÕÊÓÔÁ "
-#~ "×ÙÂÅÒÉÔÅ\n"
-#~ "ÉÈ ÉÚ ÓÐÉÓËÁ. åÓÌÉ ×Ù ÈÏÔÉÔÅ ×ÙÂÒÁÔØ ÉÈ ×ÓÅ, ÐÒÏÓÔÏ ×ÙÂÅÒÉÔÅ \"÷ÓÅ\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "÷ÙÂÅÒÉÔÅ:\n"
-#~ "\n"
-#~ "  - ÷ÙÂÏÒÏÞÎÙÊ: åÓÌÉ ×Ù ÚÎÁËÏÍÙ Ó GNU/Linux, ÔÏ ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÃÅÌÅ×ÏÅ \n"
-#~ "ÎÁÚÎÁÞÅÎÉÅ ×ÁÛÅÊ ÓÉÓÔÅÍÙ. äÅÔÁÌÉ ÏÐÉÓÁÎÙ ÎÉÖÅ. \n"
-#~ "\n"
-#~ "\n"
-#~ "  - üËÓÐÅÒÔ: ðÏÄÒÁÚÕÍÅ×ÁÅÔÓÑ, ÞÔÏ Õ ×ÁÓ ÅÓÔØ ÏÐÙÔ Ó GNU/Linux  É ×Ù "
-#~ "ÈÏÔÉÔÅ \n"
-#~ "    ×ÙÐÏÌÎÉÔØ ÔÏÎËÕÀ ÎÁÓÔÒÏÊËÕ ÕÓÔÁÎÏ×ËÉ. ëÁË É ÄÌÑ ÕÒÏ×ÎÑ \"÷ÙÂÏÒÏÞÎÁÑ"
-#~ "\" \n"
-#~ "    ×Ù ÓÍÏÖÅÔÅ ÕËÁÚÁÔØ ÃÅÌÅ×ÏÅ ÎÁÚÎÁÞÅÎÉÅ ×ÁÛÅÊ ÓÉÓÔÅÍÙ.\n"
-#~ "    îÏ, ÐÏÖÁÌÕÊÓÔÁ, ÷ùâéòáêôå üôïô õòï÷åîø ôïìøëï åóìé ÷ù ô÷åòäï õ÷åòåîù\n"
-#~ "    ÷ ôïí þôï ÷ù äåìáåôå"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ×Ù ÄÏÌÖÎÙ ÏÐÒÅÄÅÌÉÔØ ÉÓÐÏÌØÚÏ×ÁÎÉÅ ×ÁÛÅÊ ÓÉÓÔÅÍÙ. ÷ÁÒÉÁÎÔÙ:\n"
-#~ "\n"
-#~ "* òÁÂÏÞÁÊ ÓÔÁÎÃÉÑ: ÜÔÏ ÉÄÅÁÌØÎÙÊ ×ÙÂÏÒ × ÔÏÍ ÓÌÕÞÁÅ, ÅÓÌÉ ×Ù ÐÌÁÎÉÒÕÅÔÅ "
-#~ "ÉÓÐÏÌØÚÏ×ÁÔØ ÓÉÓÔÅÍÕ × ÏÓÎÏ×ÎÏÍ ÄÌÑ ÏÂÙÞÎÏÊ ÒÁÂÏÔÙ × ÏÆÉÓÅ\n"
-#~ "  ÉÌÉ ÄÏÍÁ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* òÁÚÒÁÂÏÔËÁ ÐÒÏÇÒÁÍÍt: ÜÔÏ ÈÏÒÏÛÉÊ ×ÙÂÏÒ, ÅÓÌÉ ×Ù ÐÌÁÎÉÒÕÅÔÅ "
-#~ "ÉÓÐÏÌØÚÏ×ÁÔØ Ó×ÏÀ ÓÉÓÔÅÍÕ × ÏÓÎÏ×ÎÏÍ ÄÌÑ ÒÁÚÒÁÂÏÔËÉ ÐÒÏÇÒÁÍÍ. õ ×ÁÓ "
-#~ "ÂÕÄÅÔ\n"
-#~ "  ÐÏÌÎÙÊ ÎÁÂÏÒ ÕÓÔÁÎÏ×ÌÅÎÎÙÈ ÐÒÏÇÒÁÍÍ ÄÌÑ ËÏÍÐÉÌÑÃÉÉ, ÏÔÌÁÄËÉ, "
-#~ "ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ÉÓÈÏÄÎÙÈ ÔÅËÓÔÏ× Á ÔÁËÖÅ ÄÌÑ ÓÏÚÄÁÎÉÑ ÐÁËÅÔÏ× ÐÒÏÇÒÁÍÍ.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "* óÅÒ×ÅÒ: ÈÏÒÏÛÉÊ ×ÙÂÏÒ, ÅÓÌÉ ×Ù ÐÌÁÎÉÒÕÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ËÏÍÐØÀÔÅÒ × "
-#~ "ËÁÞÅÓÔ×Å ÓÅÒ×ÅÒÁ. ìÉÂÏ × ËÁÞÅÓÔ×Å ÆÁÊÌ-ÓÅÒ×ÅÒÁ (NFS ÉÌÉ\n"
-#~ "  SMB), ÓÅÒ×ÅÒÁ ÐÅÞÁÔÉ (ÄÌÑ Unix ÉÌÉ ÄÌÑ Microsoft Windows), ÓÅÒ×ÅÒÁ "
-#~ "ÁÕÔÅÎÔÉÆÉËÁÃÉÉ (NIS), ÓÅÒ×ÅÒÁ ÂÁÚ ÄÁÎÎÙÈ\n"
-#~ "  É ÔÁË ÄÁÌÅÅ. ðÏÜÔÏÍÕ ÎÅ ÏÖÉÄÁÊÔÅ, ÞÔÏ ÂÕÄÕÔ ÕÓÔÁÎÏ×ÌÅÎÙ ÐÁËÅÔÙ ÔÉÐÁ "
-#~ "KDE, GNOME, É ÐÏÄÏÂÎÙÅ. "
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÇÒÕÐÐÕ ÐÁËÅÔÏ×, ËÏÔÏÒÙÅ ×Ù ÈÏÔÉÔÅ\n"
-#~ "ÕÓÔÁÎÏ×ÉÔØ ÉÌÉ ÏÂÎÏ×ÉÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "úÁÔÅÍ DrakX ÐÒÏ×ÅÒÉÔ, ÄÏÓÔÁÔÏÞÎÏ ÌÉ Õ ×ÁÓ ÍÅÓÔÁ ÄÌÑ ÉÈ ÕÓÔÁÎÏ×ËÉ. åÓÌÉ "
-#~ "ÎÅÔ,\n"
-#~ "ÂÕÄÅÔ ×ÙÄÁÎÏ ÐÒÅÄÕÐÒÅÖÄÅÎÉÅ. åÓÌÉ ×Ù ×ÓÅ ÒÁ×ÎÏ ÈÏÔÉÔÅ ÐÒÏÄÏÌÖÉÔØ, "
-#~ "ÕÓÔÁÎÏ×ËÁ ÂÕÄÅÔ ×ÙÂÒÁÎÎÙÈ\n"
-#~ "ÇÒÕÐÐ ÂÕÄÅÔ ×ÙÐÏÌÎÅÎÁ ÚÁ ÉÓËÌÀÞÅÎÉÅÍ ÍÅÎÅÅ ×ÁÖÎÙÈ\n"
-#~ "ÐÁËÅÔÏ×. ÷ÎÉÚÕ ÓÐÉÓËÁ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ×ÁÒÉÁÎÔ \n"
-#~ "\"éÎÄÉ×ÉÄÕÁÌØÎÙÊ ×ÙÂÏÒ ÐÁËÅÔÏ×\"; - × ÜÔÏÍ ÓÌÕÞÁÅ ×ÁÍ ÐÒÉÄÅÔÓÑ "
-#~ "ÐÒÏÓÍÏÔÒÅÔØ ÓÐÉÓÏË\n"
-#~ "ÉÚ ÂÏÌÅÅ ÞÅÍ 1000 ÐÁËÅÔÏ×..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÓÄÅÌÁÔØ ÉÎÄÉ×ÉÄÕÁÌØÎÙÊ ×ÙÂÏÒ ÐÁËÅÔÏ×, ËÏÔÏÒÙÅ\n"
-#~ "×Ù ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷Ù ÍÏÖÅÔÅ ÒÁÚ×ÏÒÁÞÉ×ÁÔØ É Ó×ÏÒÁÞÉ×ÁÔØ ÄÅÒÅ×Ï ÎÁÖÉÍÁÑ × ÌÅ×ÏÍ ÕÇÌÕ ÏËÎÁ\n"
-#~ "ÐÁËÅÔÏ×.\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÐÒÅÄÐÏÞÉÔÁÅÔÅ ÏÔÓÏÒÔÉÒÏ×ÁÔØ ÐÁËÅÔÙ × ÁÌÆÁ×ÉÔÎÏÍ ÐÏÒÑÄËÅ, ÎÁÖÍÉÔÅ "
-#~ "ÎÁ ÉËÏÎËÕ\n"
-#~ "\"ðÅÒÅËÌÀÞÉÔØ ÏÂÝÉÊ ÓÐÉÓÏË/ÓÏÒÔÉÒÏ×ËÕ ÐÏ ÇÒÕÐÐÁÍ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÐÏÌÕÞÁÔØ ÐÒÅÄÕÐÒÅÖÄÅÎÉÑ Ï ÚÁ×ÉÓÉÍÏÓÔÑÈ ÍÅÖÄÕ ÐÁËÅÔÁÍÉ, "
-#~ "ÎÁÖÍÉÔÅ ÎÁ \"á×ÔÏÍÁÔÉÞÅÓËÉÅ\n"
-#~ "ÚÁ×ÉÓÉÍÏÓÔÉ\". åÓÌÉ ×Ù ÜÔÏ ÓÄÅÌÁÅÔÅ, ÉÍÅÊÔÅ ××ÉÄÕ, ÞÔÏ ÏÔÍÅÎÁ ×ÙÂÏÒÁ "
-#~ "ÏÄÎÏÇÏ ÐÁËÅÔÁ ÍÏÖÅÔ ÍÏÌÞÁ\n"
-#~ "ÏÔÍÅÎÉÔØ ×ÙÂÏÒ ÎÅÓËÏÌØËÉÈ ÄÒÕÇÉÈ ÐÁËÅÔÏ×, ÚÁ×ÉÓÑÝÉÈ ÏÔ ÎÅÇÏ."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "åÓÌÉ Õ ×ÁÓ ÅÓÔØ ×ÓÅ CD ÉÚ ÐÒÉ×ÅÄÅÎÎÏÇÏ ×ÙÛÅ ÓÐÉÓËÁ, ÎÁÖÍÉÔÅ Ok.\n"
-#~ "åÓÌÉ Õ ×ÁÓ ÎÅÔ ÎÉ ÏÄÎÏÇÏ ÉÚ ÎÉÈ, ÎÁÖÍÉÔÅ ïÔÍÅÎÉÔØ.\n"
-#~ "åÓÌÉ ÏÔÓÕÔÓÔ×ÕÀÔ ÔÏÌØËÏ ÎÅËÏÔÏÒÙÅ CD, ÏÔÍÅÎÉÔÅ ÉÈ ×ÙÂÏÒ É ÎÁÖÍÉÔÅ Ok."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÐÏÄËÌÀÞÉÔØ ×ÁÛ ËÏÍÐØÀÔÅÒ Ë ÉÎÔÅÒÎÅÔÕ ÉÌÉ\n"
-#~ "Ë ÌÏËÁÌØÎÏÊ ÓÅÔÉ ×ÙÂÅÒÉÔÅ ÎÕÖÎÙÊ ×ÁÒÉÁÎÔ. ðÏÖÁÌÕÊÓÔÁ, ×ËÌÀÞÉÔÅ ×ÁÛÅ "
-#~ "ÕÓÔÒÏÊÓÔ×Ï\n"
-#~ "ÐÅÒÅÄ ×ÙÂÏÒÏÍ, ÞÔÏÂÙ DrakX ÓÍÏÇ ÅÇÏ Á×ÔÏÍÁÔÉÞÅÓËÉ ÏÐÒÅÄÅÌÉÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ Õ ×ÁÓ ÎÅÔ ÓÏÅÄÉÎÅÎÉÑ Ó ÉÎÔÅÒÎÅÔ ÉÌÉ Ó ÌÏËÁÌØÎÏÊ ÓÅÔØÀ, ×ÙÂÅÒÉÔÅ\n"
-#~ "\"ïÔËÌÀÞÉÔØ ÓÅÔØ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÎÁÓÔÒÏÉÔØ ÓÅÔØ ÐÏÓÌÅ ÕÓÔÁÎÏ×ËÉ, ÌÉÂÏ ÅÓÌÉ ×Ù ÕÖÅ\n"
-#~ "ÚÁËÏÎÞÉÌÉ ÎÁÓÔÒÏÊËÕ ÓÅÔÅ×ÏÇÏ ÓÏÅÄÉÎÅÎÉÑ, ×ÙÂÅÒÉÔÅ \"÷ÙÐÏÌÎÅÎÏ\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "îÉ ÏÄÎÏÇÏ ÍÏÄÅÍÁ ÎÅ ÏÂÎÁÒÕÖÅÎÏ. ðÏÖÁÌÕÊÓÔÁ, ×ÙÂÅÒÉÔÅ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÙÊ "
-#~ "ÐÏÒÔ, Ë ËÏÔÏÒÏÍÕ ÏÎ ÐÏÄËÌÀÞÅÎ.\n"
-#~ "\n"
-#~ "\n"
-#~ "äÌÑ ÓÐÒÁ×ËÉ - ÐÅÒ×ÙÊ ÐÏÓÌÅÄÏ×ÁÔÅÌØÎÙÊ ÐÏÒÔ (ÎÁÚÙ×ÁÅÍÙÊ \"COM1\" × "
-#~ "Microsoft\n"
-#~ "Windows) × Linux ÎÁÚÙ×ÁÅÔÓÑ \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÎÁÓÔÒÏÉÔØ ÐÁÒÁÍÅÔÒÙ ÄÏÚ×ÏÎÁ. åÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ\n"
-#~ "ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, ÐÒÁ×ÉÌØÎÁÑ ÉÎÆÏÒÍÁÃÉÑ ÍÏÖÅÔ ÂÙÔØ "
-#~ "ÐÏÌÕÞÅÎÁ ÏÔ\n"
-#~ "×ÁÛÅÇÏ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ. åÓÌÉ ×Ù ÎÅ ××ÅÄÅÔÅ ÉÎÆÏÒÍÁÃÉÀ Ï DNS (ÓÅÒ×ÅÒ "
-#~ "ÉÍÅÎ)\n"
-#~ "ÓÅÊÞÁÓ, ÔÏ ÜÔÁ ÉÎÆÏÒÍÁÃÉÑ ÂÕÄÅÔ ÐÏÌÕÞÅÎÁ ÏÔ ×ÁÛÅÇÏ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ ×Ï "
-#~ "×ÒÅÍÑ\n"
-#~ "ÓÏÅÄÉÎÅÎÉÑ."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "åÓÌÉ Õ ×ÁÓ ×ÎÅÛÎÉÊ ÍÏÄÅÍ, ×ËÌÀÞÉÔÅ ÅÇÏ ÓÅÊÞÁÓ, ÞÔÏÂÙ DrakX ÓÍÏÇ ÅÇÏ "
-#~ "Á×ÔÏÍÁÔÉÞÅÓËÉ ÏÐÒÅÄÅÌÉÔØ."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "ðÏÖÁÌÕÊÓÔÁ, ×ËÌÀÞÉÔÅ ×ÁÛ ÍÏÄÅÍ É ×ÙÂÅÒÉÔÅ ÐÒÁ×ÉÌØÎÙÊ."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÎÅ Õ×ÅÒÅÎÙ × ÐÒÁ×ÉÌØÎÏÓÔÉ ×ÙÛÅÕËÁÚÁÎÎÏÊ ÉÎÆÏÒÍÁÃÉÉ\n"
-#~ "ÉÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ÞÔÏ ××ÏÄÉÔØ, ÐÒÁ×ÉÌØÎÁÑ ÉÎÆÏÒÍÁÃÉÑ\n"
-#~ "ÍÏÖÅÔ ÂÙÔØ ÐÏÌÕÞÅÎÁ ÏÔ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ. åÓÌÉ ×Ù ÎÅ ××ÅÄÅÔÅ ÓÅÊÞÁÓ\n"
-#~ "ÉÎÆÏÒÍÁÃÉÀ Ï DNS (ÓÅÒ×ÅÒÅ ÉÍÅÎ), ÜÔÁ ÉÎÆÏÒÍÁÃÉÑ ÂÕÄÅÔ ÐÏÌÕÞÅÎÁ ÐÏÚÖÅ\n"
-#~ "ÏÔ ×ÁÛÅÇÏ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ ×Ï ×ÒÅÍÑ ÓÏÅÄÉÎÅÎÉÑ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ÷Ù ÍÏÖÅÔÅ ÚÁÄÁÔØ ÎÁÚ×ÁÎÉÅ (ÉÍÑ) ÄÌÑ ×ÁÛÅÊ ÍÁÛÉÎÙ, ÅÓÌÉ ÈÏÔÉÔÅ. "
-#~ "åÓÌÉ\n"
-#~ "×Ù ÎÅ ÚÎÁÅÔÅ ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, ÐÒÁ×ÉÌØÎÁÑ ÉÎÆÏÒÍÁÃÉÑ "
-#~ "ÍÏÖÅÔ ÂÙÔØ\n"
-#~ "ÐÏÌÕÞÅÎÁ ÏÔ ×ÁÛÅÇÏ ÉÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÎÁÓÔÒÏÊÉÔØ ×ÁÛÅ ÕÓÔÒÏÊÓÔ×Ï ÐÏÄËÌÀÞÅÎÉÑ Ë ÓÅÔÉ.\n"
-#~ "\n"
-#~ "   * IP ÁÄÒÅÓ: ÅÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, "
-#~ "ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ×ÁÛÅÊ ÓÅÔÉ.\n"
-#~ "     ÷Ù ÎÅ ÄÏÌÖÎÙ ××ÏÄÉÔØ IP ÁÄÒÅÓ, ÅÓÌÉ ×ÙÂÅÒÉÔÅ ×ÁÒÉÁÎÔ "
-#~ "\"á×ÔÏÍÁÔÉÞÅÓËÉÊ IP\" ×ÎÉÚÕ.\n"
-#~ "\n"
-#~ "   * íÁÓËÁ ÓÅÔÉ: \"255.255.255.0\" - ÏÂÙÞÎÏ ÈÏÒÏÛÉÊ ×ÙÂÏÒ. åÓÌÉ ×Ù ÎÅ "
-#~ "ÚÎÁÅÔÅ ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ,\n"
-#~ "     ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ×ÁÛÅÊ ÓÅÔÉ.\n"
-#~ "\n"
-#~ "   * á×ÔÏÍÁÔÉÞÅÓËÉÊ IP: ÅÓÌÉ × ×ÁÛÅÊ ÓÅÔÉ ÉÓÐÏÌØÚÕÀÔÓÑ ÐÒÏÔÏËÏÌÙ BOOTP "
-#~ "ÉÌÉ DHCP, ×ÙÂÅÒÉÔÅ ÜÔÏÔ ×ÁÒÉÁÎÔ. åÓÌÉ ÏÎ ×ÙÂÒÁÎ, ÚÎÁÞÅÎÉÅ, ÕËÁÚÁÎÎÏÅ ×\n"
-#~ "    \"IP ÁÄÒÅÓ\" ÂÕÄÅÔ ÐÒÏÉÇÎÏÒÉÒÏ×ÁÎÏ. åÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ "
-#~ "× ÎÅÏÂÈÏÄÉÍÏÓÔÉ ×ÙÂÏÒÁ ÜÔÏÇÏ ×ÁÒÉÁÎÔÁ, ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ×ÁÛÅÊ ÓÅÔÉ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ××ÅÓÔÉ ÉÍÑ ×ÁÛÅÇÏ ËÏÍÐØÀÔÅÒÁ, ÅÓÌÉ ÎÕÖÎÏ. åÓÌÉ ×Ù ÎÅ "
-#~ "ÚÎÁÅÔÅ ÉÌÉ \n"
-#~ "ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ×ÁÛÅÊ ÓÅÔÉ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ××ÅÓÔÉ ÉÍÑ ×ÁÛÅÇÏ ËÏÍÐØÀÔÅÒÁ, ÅÓÌÉ ÎÕÖÎÏ. åÓÌÉ ×Ù ÎÅ "
-#~ "ÚÎÁÅÔÅ\n"
-#~ "ÉÌÉ ÎÅ Õ×ÅÒÅÎÙ × ÔÏÍ, ÞÔÏ ÎÕÖÎÏ ××ÅÓÔÉ, ÏÓÔÁ×ØÔÅ ÐÏÌÅ ÎÅÚÁÐÏÌÎÅÎÎÙÍ."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ÍÏÖÎÏ ××ÅÓÔÉ ÐÁÒÁÍÅÔÒÙ ÄÏÚ×ÏÎÁ (dialup). åÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ÞÔÏ "
-#~ "××ÅÓÔÉ, \n"
-#~ "ÐÒÁ×ÉÌØÎÕÀ ÉÎÆÏÒÍÁÃÉÀ ÍÏÖÎÏ ÐÏÌÕÞÉÔØ Õ Ó×ÏÅÇÏ ÐÒÏ×ÁÊÄÅÒÁ ÉÎÔÅÒÎÅÔ (ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "åÓÌÉ ÂÕÄÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÓÅÒ×ÅÒÁ proxy, ÎÁÓÔÒÏÊÔÅ ÉÈ ÓÅÊÞÁÓ. åÓÌÉ ÎÅ "
-#~ "ÚÎÁÅÔÅ,\n"
-#~ "ÎÕÖÎÏ ÌÉ ÜÔÏ, ÏÂÒÁÔÉÔÅÓØ Ë ÁÄÍÉÎÉÓÔÒÁÔÏÒÕ ÓÅÔÉ ÉÌÉ ÉÎÔÅÒÎÅÔ ÐÒÏ×ÁÊÄÅÒÕ."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "÷Ù ÍÏÖÅÔÅ ÕÓÔÁÎÏ×ÉÔØ ÐÁËÅÔ ÛÉÆÒÏ×ÁÎÉÑ, ÅÓÌÉ ×ÁÛÅ ÓÏÅÄÉÎÅÎÉÅ c ÉÎÔÅÒÎÅÔ "
-#~ "ÕÖÅ\n"
-#~ "ÐÒÁ×ÉÌØÎÏ ÎÁÓÔÒÏÅÎÏ. óÎÁÞÁÌÁ ×ÙÂÅÒÉÔÅ ÓÅÒ×ÅÒ, ÏÔËÕÄÁ ×Ù ÈÏÔÉÔÅ ÓËÁÞÁÔØ "
-#~ "ÐÁËÅÔÙ É \n"
-#~ "ÐÏÔÏÍ ×ÙÂÅÒÉÔÅ ÐÁËÅÔÙ, ËÏÔÏÒÙÅ ÈÏÔÉÔÅ ÕÓÔÁÎÏ×ÉÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "éÍÅÊÔÅ ××ÉÄÕ, ÞÔÏ ×ÁÍ ÎÕÖÎÏ ×ÙÂÉÒÁÔØ ÓÅÒ×ÅÒ É ÐÁËÅÔÙ ÛÉÆÒÏ×ÁÎÉÑ × "
-#~ "ÓÏÏÔ×ÅÔÓÔ×ÉÉ Ó ÚÁËÏÎÏÄÁÔÅÌØÓÔ×ÏÍ,\n"
-#~ "ÄÅÊÓÔ×ÕÀÝÉÍ × ×ÁÛÅÊ ÓÔÒÁÎÅ."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÞÁÓÏ×ÏÊ ÐÏÑÓ, × ËÏÔÏÒÏÍ ×Ù ÖÉ×ÅÔÅ."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÎÁÓÔÒÏÊÔØ ÌÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ (ÐÏÄËÌÀÞÅÎÎÙÊ Ë ×ÁÛÅÍÕ "
-#~ "ËÏÍÐØÀÔÅÒÕ) ÉÌÉ ÕÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ\n"
-#~ " (ÄÏÓÔÕÐÎÙÊ ÐÏ ÓÅÔÉ Unix, Netware ÉÌÉ Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ×ÙÐÏÌÎÑÔØ ÐÅÞÁÔØ, ×ÙÂÅÒÉÔÅ ÓÉÔÅÍÕ ÐÅÞÁÔÉ - \n"
-#~ "CUPS ÉÌÉ LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS - ÎÏ×ÁÑ, ÍÏÝÎÁÑ É ÇÉÂËÁÑ ÓÉÓÔÅÍÁ ÐÅÞÁÔÉ ÄÌÑ Unix ÓÉÓÔÅÍ (CUPS\n"
-#~ "ÏÚÎÁÞÁÅÔ \"ïÂÙÞÎÁÑ óÉÓÔÅÍÁ ðÅÞÁÔÉ Unix\"). üÔÁ ÓÉÓÔÅÍÁ ÉÓÐÏÌØÚÕÅÔÓÑ ×\n"
-#~ "Mandrake Linux ÐÏ ÕÍÏÌÞÁÎÉÀ.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR - ÓÔÁÒÁÑ ÓÉÓÔÅÍÁ ÐÅÞÁÔÉ, ÉÓÐÏÌØÚÏ×Á×ÛÁÑÓÑ × ÐÒÅÄÙÄÕÝÉÈ ÄÉÓÔÒÉÂÕÔÉ×ÁÈ "
-#~ "Mandrake Linux .\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ Õ ×ÁÓ ÎÅÔ ÐÒÉÎÔÅÒÁ, ×ÙÂÅÒÉÔÅ \"ïÔÓÕÔÓÔ×ÕÅÔ\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "÷ GNU/Linux ÍÏÖÅÔ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÍÎÏÇÏ ÔÉÐÏ× ÐÒÉÎÔÅÒÏ×. ëÁÖÄÙÊ ÔÉÐ "
-#~ "ÔÒÅÂÕÅÔ\n"
-#~ "ÒÁÚÎÏÊ ÎÁÓÔÒÏÊËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×ÁÛ ÐÒÉÎÔÅÒ ÆÉÚÉÞÅÓËÉ ÐÏÄËÌÀÞÅÎ Ë ×ÁÛÅÍÕ ËÏÍÐØÀÔÅÒÕ, ×ÙÂÅÒÉÔÅ "
-#~ "\"ìÏËÁÌØÎÙÊ\n"
-#~ "ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÐÏÌÕÞÉÔØ ÄÏÓÔÕÐ Ë ÐÒÉÎÔÅÒÕ ÎÁ ÕÄÁÌÅÎÎÏÊ Unix ÍÁÛÉÎÅ, "
-#~ "×ÙÂÅÒÉÔÅ\n"
-#~ "\"õÄÁÌÅÎÎÙÊ ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "åÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÉÎÔÅÒ, ÐÏÄËÌÀÞÅÎÎÙÊ Ë ÕÄÁÌÅÎÎÏÊ ÍÁÛÉÎÅ Ó "
-#~ "Microsoft Windows \n"
-#~ "(ÉÌÉ ÍÁÛÉÎÅ Ó Unix, ÉÓÐÏÌØÚÕÑ SMB ÐÒÏÔÏËÏÌ), ×ÙÂÅÒÉÔÅ \"SMB/Windows 95/98/"
-#~ "NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "ðÏÖÁÌÕÊÓÔÁ, ÐÅÒÅÄ ÐÒÏÄÏÌÖÅÎÉÅÍ ÎÁÓÔÒÏÊËÉ ×ËÌÀÞÉÔÅ ×ÁÛ ÐÒÉÎÔÅÒ, ÞÔÏÂÙ "
-#~ "DrakX ÓÍÏÇ ÅÇÏ ÏÐÒÅÄÅÌÉÔØ.\n"
-#~ "\n"
-#~ "óÅÊÞÁÓ ÷ÁÍ ÐÏÔÒÅÂÕÅÔÓÑ ××ÅÓÔÉ ÎÅËÏÔÏÒÕÀ ÉÎÆÏÒÍÁÃÉÀ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * éÍÑ ÐÒÉÎÔÅÒÁ: ÍÅÎÅÄÖÅÒ ÐÅÞÁÔÉ (spooler) \"lp\" ËÁË ÉÍÑ ÐÒÉÎÔÅÒÁ ÐÏ "
-#~ "ÕÍÏÌÞÁÎÉÀ. ðÏÜÔÏÍÕ, Õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÐÒÉÎÔÅÒ Ó ÉÍÅÎÅÍ \"lp\".\n"
-#~ "     åÓÌÉ Õ ×ÁÓ ÔÏÌØËÏ ÏÄÉÎ ÐÒÉÎÔÅÒ, ×Ù ÍÏÖÅÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÎÅÓËÏÌØËÏ "
-#~ "ÉÍÅÎ ÄÌÑ ÎÅÇÏ. ÷Ù ÐÒÏÓÔÏ ÄÏÌÖÎÙ ÒÁÚÄÅÌÉÔØ ÉÈ ÓÉÍ×ÏÌÏÍ\n"
-#~ "     \"|\". ðÏÜÔÏÍÕ, ÅÓÌÉ ×Ù ÐÒÅÄÐÏÞÉÔÁÅÔÅ ÓÍÙÓÌÏ×ÏÅ ÉÍÑ, ÅÇÏ ÎÕÖÎÏ "
-#~ "ÐÏÍÅÓÔÉÔØ ÐÅÒ×ÙÍ, ÎÁÐÒÉÍÅÒ: \"íÏÊ ÐÒÉÎÔÅÒ|lp\".\n"
-#~ "     ðÒÉÎÔÅÒ, ÓÏÄÅÒÖÁÝÉÊ \"lp\" × ÓÏ×ÅÍ ÉÍÅÎÉ ÉÌÉ ÉÍÅÎÁÈ, ÂÕÄÅÔ ÐÒÉÎÔÅÒÏÍ "
-#~ "ÐÏ ÕÍÏÌÞÁÎÉÀ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ïÐÉÓÁÎÉÅ: ÜÔÏ ÕËÁÚÙ×ÁÔØ ÎÅÏÂÑÚÁÔÅÌØÎÏ, ÎÏ ÍÏÖÅÔ ÏËÁÚÁÔØÓÑ ÐÏÌÅÚÎÙÍ "
-#~ "ÅÓÌÉ ÎÅÓËÏÌØËÏ ÐÒÉÎÔÒÏ× ÐÏÄËÌÀÞÅÎÙ Ë ×ÁÛÅÍÕ ËÏÍÐØÀÔÅÒÕ ÉÌÉ ÅÓÌÉ ×Ù "
-#~ "ÒÁÚÒÅÛÁÅÔÅ\n"
-#~ "     ÄÒÕÇÉÍ ËÏÍÐØÀÔÅÒÁÍ ÉÓÐÏÌØÚÏ×ÁÔØ ×ÁÛ ÐÒÉÎÔÅÒ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * òÁÓÐÏÌÏÖÅÎÉÅ: ÅÓÌÉ ×Ù ÈÏÔÉÔÅ ÕËÁÚÁÔØ ËÁËÕÀ-ÌÉÂÏ ÉÎÆÏÒÍÁÃÉÀ Ï "
-#~ "ÒÁÓÐÏÌÏÖÅÎÉÉ\n"
-#~ "     ×ÁÛÅÇÏ ÐÒÉÎÔÅÒÁ, ÎÁÐÉÛÉÔÅ ÅÅ ÚÄÅÓØ (ÐÉÓÁÔØ ÍÏÖÅÔÅ ×ÓÅ, ÞÔÏ ÕÇÏÄÎÏ\n"
-#~ "     , ÎÁÐÒÉÍÅÒ \"2ÏÊ ÜÔÁÖ\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×ÁÍ ÐÏÔÒÅÂÕÅÔÓÑ ××ÅÓÔÉ ÎÅËÏÔÏÒÕÀ ÉÎÆÏÒÍÁÃÉÀ.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * éÍÑ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ: ÍÅÎÅÄÖÅÒ ÐÅÞÁÔÉ ÉÓÐÏÌØÚÕÅÔ \"lp\" × ËÁÞÅÓÔ×Å "
-#~ "ÉÍÅÎÉ ÐÏ ÕÍÏÌÞÁÎÉÀ. ðÏÜÔÏÍÕ Õ ×ÁÓ ÄÏÌÖÅÎ ÂÙÔØ ÐÒÉÎÔÅÒ Ó ÉÍÅÎÍ \"lp\".\n"
-#~ "    åÓÌÉ Õ ×ÁÓ ÔÏÌØËÏ ÏÄÉÎ ÐÒÉÎÔÅÒ, ×Ù ÍÏÖÅÔÅ ÚÁÄÁÔØ ÄÌÑ ÎÅÇÏ ÎÅÓËÏÌØËÏ "
-#~ "ÉÍÅÎ. ðÒÏÓÔÏ ÒÁÚÄÅÌÉÔÅ ÉÍÅÎÁ ÓÉÍ×ÏÌÏÍ\n"
-#~ "    \"|\". ôÁË, ÅÓÌÉ ×Ù ÐÒÅÄÐÏÞÉÔÁÅÔÅ ÂÏÌÅÅ ÏÓÍÙÓÌÅÎÎÏÅ ÉÍÑ, ÔÏ ÐÏÍÅÓÔÉÔÅ "
-#~ "ÅÇÏ ÐÅÒ×ÙÍ, ÎÁÐÒÉÍÅÒ: \"íÏÊ ÐÒÉÎÔÅÒ|lp\".\n"
-#~ "    ðÒÉÎÔÅÒ, ÓÏÄÅÒÖÁÝÉÊ × ÉÍÅÎÉ ÌÉÂÏ ÉÍÅÎÁÈ \"lp\" ÂÕÄÅÔ ÐÒÉÎÔÅÒÏÍ ÐÏ "
-#~ "ÕÍÏÌÞÁÎÉÀ.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * ëÁÔÁÌÏÇ ÏÞÅÒÅÄÉ: × ÜÔÏÍ ËÁÔÁÌÏÇÅ ÂÕÄÕÔ ÈÒÁÎÉÔØÓÑ ×ÓÅ ÚÁÄÁÎÉÑ ÎÁ "
-#~ "ÐÅÞÁÔØ. ïÓÔÁ×ØÔÅ ×ÙÂÏÒ ÐÏ ÕÍÏÌÞÁÎÉÀ,\n"
-#~ "     ÅÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ËÁËÏÊ ËÁÔÁÌÏÇ ÕËÁÚÁÔØ\n"
-#~ "\n"
-#~ "\n"
-#~ "   * ôÉÐ ÐÏÄËÌÀÞÅÎÉÑ: åÓÌÉ ×ÁÛ ÐÒÉÎÔÅÒ ÆÉÚÉÞÅÓËÉ ÐÒÉÓÏÅÄÉÎÅÎ Ë ×ÁÛÅÍÕ "
-#~ "ËÏÍÐØÀÔÅÒÕ, ×ÙÂÅÒÉÔÅ \"ìÏËÁÌØÎÙÊ ÐÒÉÎÔÅÒ\".\n"
-#~ "     åÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÉÎÔÅÒ, ÐÏÄËÌÀÞÅÎÎÙÊ Ë ÕÄÁÌÅÎÎÏÊ Unix "
-#~ "ÍÁÛÉÎÅ, ×ÙÂÅÒÉÔÅ \"õÄÁÌÅÎÎÙÊ lpd ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     åÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÉÎÔÅÒ, ÐÏÄËÌÀÞÅÎÎÙÊ Ë ÕÄÁÌÅÎÎÏÊ "
-#~ "Microsoft Windows ÍÁÛÉÎÅ (ÉÌÉ Ë ÍÁÛÉÎÅ Unix ÉÓÐÏÌØÚÕÀÑ SMB\n"
-#~ "     ÐÒÏÔÏËÏÌ), ×ÙÂÅÒÉÔÅ \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     åÓÌÉ ×Ù ÈÏÔÉÔÅ ÉÓÐÏÌØÚÏ×ÁÔØ ÐÒÉÎÔÅÒ, ÒÁÓÐÏÌÏÖÅÎÎÙÊ × ÌÏËÁÌØÎÏÊ ÓÅÔÉ "
-#~ "NetWare, ×ÙÂÅÒÉÔÅ \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "÷ÁÛ ÐÒÉÎÔÅÒ ÎÅ ÏÂÎÁÒÕÖÅÎ. ÷×ÅÄÉÔÅ ÉÍÑ ÕÓÔÒÏÊÓÔ×Á, Ë ËÏÔÏÒÏÍÕ ÏÎ "
-#~ "ÐÏÄËÌÀÞÅÎ\n"
-#~ ".\n"
-#~ "\n"
-#~ "\n"
-#~ "äÌÑ ÓÐÒÁ×ËÉ - ÂÏÌØÛÉÎÓÔ×Ï ÐÒÉÎÔÅÒÏ× ÐÏÄËÌÀÞÁÀÔÓÑ Ë ÐÅÒ×ÏÍÕ ÐÁÒÁÌÌÅÌØÎÏÍÕ "
-#~ "ÐÏÒÔÕ. ÷ GNU/Linux\n"
-#~ "ÏÎ ÎÁÚÙ×ÁÅÔÓÑ \"/dev/lp0\", × Microsoft Windows - \"LPT1\" ."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "óÅÊÞÁÓ ×ÁÍ ÎÕÖÎÏ ×ÙÂÒÁÔØ ×ÁÛ ÐÒÉÎÔÅÒ ÉÚ ÐÒÉ×ÅÄÅÎÎÏÇÏ ÓÐÉÓËÁ."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "ðÏÖÁÌÕÊÓÔÁ ×ÙÂÅÒÉÔÅ ÐÒÁ×ÉÌØÎÙÅ ÎÁÓÔÒÏÊËÉ, ÓÏÏÔ×ÅÔÓ×ÕÀÝÉÅ ×ÁÛÅÍÕ "
-#~ "ÐÒÉÎÔÅÒÕ.\n"
-#~ "ðÏÖÁÌÕÊÓÔÁ ÐÒÏÞÉÔÁÊÔÅ ÄÏËÕÍÅÎÔÁÃÉÀ ÎÁ ÐÒÉÎÔÅÒ, ÅÓÌÉ ×Ù ÎÅ ÚÁÎÅÔÅ, ÞÔÏ "
-#~ "ÕËÁÚÁÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "õ ×ÁÓ ÂÕÄÅÔ ×ÏÚÍÏÖÎÏÓÔØ ÐÒÏÔÅÓÔÉÒÏ×ÁÔØ ×ÁÛÉ ÎÁÓÔÒÏÊËÉ ÎÁ ÓÌÅÄÕÀÝÅÍ ÜÔÁÐÅ "
-#~ "É ×Ù ÓÍÏÖÅÔÅ ÉÚÍÅÎÉÔØ ÉÈ, ÅÓÌÉ ÐÒÉÎÔÅÒ ÂÕÄÅÔ ÒÁÂÏÔÁÔØ ÎÅËÏÒÒÅËÔÎÏ."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ××ÅÓÔÉ ÐÁÒÏÌØ ÐÏÌØÚÏ×ÁÔÅÌÑ root ÄÌÑ ×ÁÛÅÊ Mandrake Linux "
-#~ "ÓÉÓÔÅÍÙ.\n"
-#~ "ðÁÒÏÌØ ÎÕÖÎÏ ××ÅÓÔÉ Ä×ÁÖÄÙ, ÞÔÏÂÙ ÕÂÅÄÉÔØÓÑ, ÞÔÏ ÏÂÁ ÐÁÒÏÌÑ ÓÏ×ÐÁÄÁÀÔ .\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÏÌØÚÏ×ÁÔÅÌØ root - ÜÔÏ ÓÉÓÔÅÍÎÙÊ ÁÄÍÉÎÉÓÔÒÁÔÏÒ É ÅÄÉÎÓÔ×ÅÎÎÙÊ "
-#~ "ÐÏÌØÚÏ×ÁÔÅÌØ, ËÔÏÒÏÍÕ\n"
-#~ "ÒÁÚÒÅÛÅÎÏ ÉÚÍÅÎÑÔØ ËÏÎÆÉÇÕÒÁÃÉÀ ÓÉÓÔÅÍÙ. óÌÅÄÏ×ÁÔÅÌØÎÏ, ×ÎÉÍÁÔÅÌØÎÏ "
-#~ "×ÙÂÉÒÁÊÔÅ ÐÁÒÏÌØ. \n"
-#~ "éÓÐÏÌØÚÏ×ÁÎÉÅ ÕÞÅÔÎÏÊ ÚÁÐÉÓÉ root ÐÏÓÔÏÒÏÎÎÉÍÉ ÌÉÃÁÍÉ ÍÏÖÅÔ ÂÙÔØ "
-#~ "Ó×ÅÒÈÏÐÁÓÎÙÍ ÄÌÑ ÃÅÌÏÓÔÎÏÓÔÉ\n"
-#~ "ÓÉÓÔÅÍÙ, ÅÅ ÄÁÎÎÙÈ É ÄÒÕÇÉÈ ÓÉÓÔÅÍ, ÓÏÅÄÉÎÅÎÎÙÈ Ó ÎÅÊ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÁÒÏÌØ ÄÏÌÖÅÎ ÓÏÓÔÏÑÔØ ÉÚ ÂÕË× É ÃÉÆÒ É ÂÙÔØ ËÁË ÍÉÎÉÍÕÍ 8\n"
-#~ "ÓÉÍ×ÏÌÏ× ÄÌÉÎÎÏÊ. åÇÏ ÎÉËÏÇÄÁ É ÎÉËÕÄÁ ÎÅÌØÚÑ ÚÁÐÉÓÙ×ÁÔØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÅ ÓÔÏÉÔ ÄÅÌÁÔØ ÅÇÏ ÓÌÉÛËÏÍ ÄÌÉÎÎÙÍ ÉÌÉ ÓÌÏÖÎÙÍ: ×Ù ÄÏÌÖÎÙ ×ÓÐÏÍÉÎÁÔØ ÅÇÏ "
-#~ "ÂÅÚ\n"
-#~ "ÏÓÏÂÙÈ ÕÓÉÌÉÊ."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ×Ù ÍÏÖÅÔÅ ÓÏÚÄÁÔØ ÏÄÎÕ ÉÌÉ ÎÅÓËÏÌØËÏ \"ÏÂÙÞÎÙÈ\" ÕÞÅÔÎÙÈ ÚÁÐÉÓÅÊ "
-#~ "ÄÌÑ ÐÏÌØÚÏ×ÁÔÅÌÅÊ\n"
-#~ ", × ÏÔÌÉÞÉÅ ÏÔ \"ÐÒÉ×ÉÌÅÇÉÒÏ×ÁÎÎÏÊ\" ÕÞÅÔÎÏÊ ÚÁÐÉÓÉ root. íÏÖÎÏ\n"
-#~ "ÓÏÚÄÁÔØ ÏÄÎÕ ÉÌÉ ÎÅÓËÏÌØËÏ ÕÞÅÔÎÙÈ ÚÁÐÉÓÅÊ ÄÌÑ ËÁÖÄÏÇÏ ÐÏÌØÚÏ×ÁÔÅÌÑ,\n"
-#~ "ËÏÔÏÒÙÊ ÂÕÄÅÔ ÒÁÂÏÔÁÔØ ÎÁ ËÏÍÐØÀÔÅÒÅ. äÌÑ ËÁÖÄÏÊ ÕÞÅÔÎÏÊ ÚÁÐÉÓÉ "
-#~ "ÐÏÌØÚÏ×ÁÔÅÌÑ\n"
-#~ "ÓÏÚÄÁÀÔÓÑ Ó×ÏÉ ÎÁÓÔÒÏÊËÉ (ÇÒÁÆÉÞÅÓËÏÅ ÏËÒÕÖÅÎÉÅ, ÎÁÓÔÒÏÊËÉ ÐÒÏÇÒÁÍÍ, É Ô."
-#~ "Ä.)\n"
-#~ "É Ó×ÏÊ \"ÄÏÍÁÛÎÉÊ ËÁÔÁÌÏÇ\", × ËÏÔÏÒÏÍ ÈÒÁÎÑÔÓÑ ÜÔÉ \n"
-#~ "ÎÁÓÔÒÏÊËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÒÅÖÄÅ ×ÓÅÇÏ ÓÏÚÄÁÊÔÅ ÕÞÅÔÎÕÀ ÚÁÐÉÓØ ÄÌÑ ÓÅÂÑ! äÁÖÅ ÅÓÌÉ ×Ù ÂÕÄÅÔÅ "
-#~ "ÅÄÉÎÓÔ×ÅÎÎÙÍ\n"
-#~ "ÐÏÌØÚÏ×ÁÔÅÌÅÍ ÎÁ ÍÁÛÉÎÅ, ÎÅ ÓÌÅÄÕÅÔ ×ÈÏÄÉÔØ ÐÏÄ ÉÍÅÎÅÍ root\n"
-#~ "ÄÌÑ ÐÏ×ÓÅÄÎÅ×ÎÏÊ ÒÁÂÏÔÙ: ÜÔÏ ÓÌÉÛËÏÍ ÂÏÌØÛÁÑ ÕÇÒÏÚÁ ÂÅÚÏÐÁÓÎÏÓÔÉ. \n"
-#~ "íÏÖÎÏ ÒÁÚÒÕÛÉÔØ ÓÉÓÔÅÍÕ ÏÂÙÞÎÏÊ ÏÐÅÞÁÔËÏÊ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÏÜÔÏÍÕ ×ÈÏÄÉÔØ × ÓÉÓÔÅÍÕ ÎÁÄÏ, ÉÓÐÏÌØÚÕÑ ÕÞÅÔÎÕÀ ÚÁÐÉÓØ ÏÂÙÞÎÏÇÏ "
-#~ "ÐÏÌØÚÏ×ÁÔÅÌÑ,\n"
-#~ "ËÏÔÏÒÏÇÏ ×Ù ÓÅÊÞÁÓ É ÓÏÚÄÁÄÉÔÅ, Á ×ÈÏÄÉÔØ ËÁË root ÎÁÄÏ ÔÏÌØËÏ\n"
-#~ "× ÃÅÌÑÈ ÁÄÍÉÎÉÓÔÒÉÒÏ×ÁÎÉÑ É ÏÂÓÌÕÖÉ×ÁÎÉÑ ÓÉÓÔÅÍÙ."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "îÁÓÔÏÑÔÅÌØÎÏ ÒÅËÏÍÅÎÄÕÅÔÓÑ ÓÏÚÄÁÔØ ÚÁÇÒÕÚÏÞÎÕÀ ÄÉÓËÅÔÕ. åÓÌÉ ×Ù ÎÅ ÓÍÏÖÅÔ "
-#~ "ÚÁÇÒÕÚÉÔØ\n"
-#~ "ËÏÍÐØÀÔÅÒ, ÜÔÏ ÂÕÄÅÔ ÅÄÉÎÓÔ×ÅÎÎÙÊ ÓÐÏÓÏÂÏ ×ÏÓÓÔÁÎÏ×ÉÔØ ÓÉÓÔÅÍÕ ÂÅÚ "
-#~ "ÐÅÒÅÕÓÔÁÎÏ×ËÉ\n"
-#~ "."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "ÏÓÎÏ×ÎÙÅ ÐÁÒÁÍÅÔÒÙ LILO É grub:\n"
-#~ "  - úÁÇÒÕÚÏÞÎÏÅ ÕÓÔÒÏÊÓÔ×Ï: õËÁÚÙ×ÁÅÔÓÑ ÉÍÑ ÕÓÔÒÏÊÓÔ×Á (ÎÁÐÒÉÍÅÒ, ÒÁÚÄÅÌ "
-#~ "ÖÅÓÔËÏÇÏ ÄÉÓËÁ,\n"
-#~ "ËÏÔÏÒÏÅ ÓÏÄÅÒÖÉÔ ÚÁÇÒÕÚÏÞÎÙÊ ÓÅËÔÏÒ. åÓÌÉ ×Ù ÎÅ ÄÅÌÁÅÔÅ ÏÓÏÚÎÁÎÎÏ ÄÒÕÇÏÊ "
-#~ "×ÙÂÏÒ, ÔÏ\n"
-#~ "×ÙÂÉÒÁÊÔÅ \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - úÁÄÅÒÖËÁ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ ÏÂÒÁÚÁ ÐÏ ÕÍÏÌÞÁÎÉÀ: úÁÄÁÅÔ ÞÉÓÌÏ × ÄÅÓÑÔÙÈ\n"
-#~ "ÄÏÌÑÈ ÓÅËÕÎÄÙ × ÔÅÞÅÎÉÅ ËÏÔÏÒÙÈ ÎÁÞÁÌØÎÙÊ ÚÁÇÒÕÚÞÉË ÖÄÅÔ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ "
-#~ "ÐÅÒ×ÏÇÏ ÏÂÒÁÚÁ.\n"
-#~ "üÔÏ ÐÏÌÅÚÎÏ ÄÌÑ ÓÉÓÔÅÍ, ÓÒÁÚÕ ÚÁÇÒÕÖÁÅÍÙÈ Ó ÖÅÓÔËÏÇÏ ÄÉÓËÁ ÓÒÁÚÕ ÐÏÓÌÅ\n"
-#~ "×ËÌÀÞÅÎÉÑ ËÌÁ×ÉÁÔÕÒÙ. úÁÇÒÕÚÞÉË ÎÅ ÖÄÅÔ, ÅÓÌÉ \"ÚÁÄÅÒÖËÁ\" \n"
-#~ "ÎÅ ÕÓÔÁÎÏ×ÌÅÎÁ, ÉÌÉ ÒÁ×ÎÁ ÎÕÌÀ."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ÜÔÏ ÄÉÓÐÅÔÞÅÒ ÚÁÇÒÕÚËÉ ÄÌÑ SPARC: \n"
-#~ "ÏÎ ÓÐÏÓÏÂÅÎ ÚÁÇÒÕÚÉÔØ GNU/Linux ÉÌÉ ÌÀÂÕÀ ÄÒÕÇÕÀ ïó, ÕÓÔÁÎÏ×ÌÅÎÎÕÀ ÎÁ "
-#~ "ÍÁÛÉÎÅ.\n"
-#~ "ïÂÙÞÎÏ ÜÔÉ ÄÒÕÇÉÅ ÏÐÅÒÁÃÉÏÎÎÙÅ ÓÉÓÔÅÍÙ ËÏÒÒÅËÔÎÏ ÒÁÓÐÏÚÎÁÀÔÓÑ É "
-#~ "ÕÓÔÁÎÁ×ÌÉ×ÁÀÔÓÑ.\n"
-#~ "åÓÌÉ ÜÔÏÇÏ ÎÅ ÐÒÏÉÚÏÛÌÏ, ×Ù ÍÏÖÅÔÅ ÄÏÂÁ×ÉÔØ ÐÕÎËÔ ×ÒÕÞÎÕÀ ÎÁ ÜÔÏÍ "
-#~ "ÜËÒÁÎÅ.\n"
-#~ "âÕÄØÔÅ ×ÎÉÍÁÔÅÌØÎÙ ÐÒÉ ÚÁÄÁÎÉÉ ÐÁÒÁÍÅÔÒÏ×.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷ÏÚÍÏÖÎÏ ÔÁËÖÅ, ÞÔÏ ×Ù ÎÅ ÈÏÔÉÔÅ ÎÉËÏÍÕ ÄÁ×ÁÔØ ÄÏÓÔÕÐ Ë ÜÔÉÍ ïó, × ÔÁËÏÍ "
-#~ "ÓÌÕÞÁÅ ÍÏÖÎÏ ÕÄÁÌÉÔØ ÓÏÏÔ×ÅÔÓÔ×ÕÀÝÉÅ ÐÕÎËÔÙ. îÏ × ÜÔÏÍ ÓÌÕÞÁÅ ÄÌÑ ÉÈ "
-#~ "ÚÁÇÒÕÚËÉ ÐÏÔÒÅÂÕÅÔÓÑ ÚÁÇÒÕÚÏÞÎÁÑ ÄÉÓËÅÔÁ!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "ÏÓÎÏ×ÎÙÅ ÐÁÒÁÍÅÔÒÙ SILO:\n"
-#~ "  - õÓÔÁÎÏ×ËÁ ÚÁÇÒÕÚÞÉËÁ: õËÁÖÉÔÅ, ÇÄÅ ×Ù ÈÏÔÉÔÅ ÒÁÚÍÅÓÔÉÔØ ÉÎÆÏÒÍÁÃÉÀ,\n"
-#~ "ÎÅÏÂÈÏÄÉÍÕÀ ÄÌÑ ÚÁÇÒÕÚËÉ GNU/Linux. åÓÌÉ ÎÅ ÚÎÁÅÔÅ ÔÏÞÎÏ, ÞÔÏ ÄÅÌÁÅÔÅ,\n"
-#~ "×ÙÂÉÒÁÊÔÅ \"ðÅÒ×ÙÊ ÓÅËÔÏÒ ÕÓÔÒÏÊÓÔ×Á (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - úÁÄÅÒÖËÁ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ ÏÂÒÁÚÁ ÐÏ ÕÍÏÌÞÁÎÉÀ: úÁÄÁÅÔ ÞÉÓÌÏ × ÄÅÓÑÔÙÈ\n"
-#~ "ÄÏÌÑÈ ÓÅËÕÎÄÙ × ÔÅÞÅÎÉÅ ËÏÔÏÒÙÈ ÚÁÇÒÕÚÞÉË ÖÄÅÔ ÐÅÒÅÄ ÚÁÇÒÕÚËÏÊ ÐÅÒ×ÏÇÏ "
-#~ "ÏÂÒÁÚÁ.\n"
-#~ "üÔÏ ÐÏÌÅÚÎÏ ÄÌÑ ÓÉÓÔÅÍ, ÚÁÇÒÕÖÁÅÍÙÈ Ó ÖÅÓÔËÏÇÏ ÄÉÓËÁ ÓÒÁÚÕ ÐÏÓÌÅ\n"
-#~ "×ËÌÀÞÅÎÉÑ ËÌÁ×ÉÁÔÕÒÙ. úÁÇÒÕÚÞÉË ÎÅ ÖÄÅÔ, ÅÓÌÉ \"ÚÁÄÅÒÖËÁ\" \n"
-#~ "ÎÅ ÕËÁÚÁÎÁ ÉÌÉ ÒÁ×ÎÁ ÎÕÌÀ."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "ôÅÐÅÒØ ÎÕÖÎÏ ÎÁÓÔÒÏÉÔØ X Window System, ËÏÔÏÒÁÑ Ñ×ÌÑÅÔÓÑ\n"
-#~ "ÏÓÎÏ×ÏÊ GNU/Linux GUI (çÒÁÆÉÞÅÓËÉÊ ðÏÌØÚÏ×ÁÔÅÌØÓËÉÊ éÎÔÅÒÆÅÊÓ). äÌÑ ÜÔÏÊ\n"
-#~ "ÃÅÌÉ ÎÁÄÏ ÎÁÓÔÒÏÉÔØ ×ÉÄÅÏËÁÒÔÕ É ÍÏÎÉÔÏÒ. âÏÌØÛÁÑ ÞÁÓÔØ ÜÔÉÈ ÛÁÇÏ×\n"
-#~ "Á×ÔÏÍÁÔÉÚÉÒÏ×ÁÎÁ, ÔÁË ÞÔÏ ×ÁÛÁ ÒÁÂÏÔÁ ÍÏÖÅÔ Ó×ÅÓÔÉÓØ Ë ÐÒÏ×ÅÒËÅ\n"
-#~ "ÒÅÚÕÌØÔÁÔÏ× ÎÁÓÔÒÏÊËÉ É ÐÏÄÔ×ÅÒÖÄÅÎÉÀ ×ÙÂÒÁÎÎÙÈ ÕÓÔÁÎÏ×ÏË :)\n"
-#~ "\n"
-#~ "\n"
-#~ "ëÏÇÄÁ ËÏÎÆÉÇÕÒÉÒÏ×ÁÎÉÅ ÚÁ×ÅÒÛÉÔÓÑ, ÂÕÄÅÔ ÚÁÐÕÝÅÎ X (ÅÓÌÉ ×Ù ÎÅ\n"
-#~ "ÐÏÐÒÏÓÉÔÅ DrakX ÎÅ ÄÅÌÁÔØ ÜÔÏÇÏ) ÞÔÏÂÙ ×Ù ÍÏÇÌÉ ÐÒÏ×ÅÒÉÔØ, ÕÓÔÒÁÉ×ÁÀÔ\n"
-#~ "ÌÉ ×ÁÓ ÕÓÔÁÎÏ×ËÉ. åÓÌÉ ÎÅÔ, ×Ù ÍÏÖÅÔÅ ×ÅÒÎÕÔØÓÑ É ÉÚÍÅÎÑÔØ ÉÈ\n"
-#~ "ÓËÏÌØËÏ ×ÁÍ ÕÇÏÄÎÏ."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "åÓÌÉ ÞÔÏ ÔÏ ÎÅ × ÐÏÒÑÄËÅ Ó ÎÁÓÔÒÏÊËÏÊ X, ÉÓÐÏÌØÚÕÊÔÅ ÜÔÉ ÐÁÒÁÍÅÔÒÙ ÄÌÑ\n"
-#~ "ËÏÒÒÅËÔÎÏÊ ÎÁÓÔÒÏÊËÉ X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "åÓÌÉ ×Ù ÐÒÅÄÐÏÞÉÔÁÅÔÅ ÇÒÁÆÉÞÅÓËÉÊ ×ÈÏÄ (login), ÷ÙÂÅÒÉÔÅ \"äÁ\". éÎÁÞÅ "
-#~ "- \n"
-#~ "\"îÅÔ\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "÷Ù ÍÏÖÅÔÅ ×ÙÂÒÁÔØ ÕÒÏ×ÅÎØ ÂÅÚÏÐÁÓÎÏÓÔÉ ÄÌÑ ×ÁÛÅÊ ÓÉÓÔÅÍÙ. ðÏÄÒÏÂÎÕÀ "
-#~ "ÉÎÆÏÒÍÁÃÉÀ ÍÏÖÎÏ\n"
-#~ "  ÎÁÊÔÉ × ÒÕËÏ×ÏÄÓÔ×Å. ëÁË ÏÂÙÞÎÏ, ÅÓÌÉ ×Ù ÎÅ ÚÎÁÅÔÅ, ÞÔÏ ×ÙÂÒÁÔØ, "
-#~ "ÏÓÔÁ×ØÔÅ ÕÓÔÁÎÏ×ËÉ ÐÏ ÕÍÏÌÞÁÎÉÀ.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "óÉÓÔÅÍÁ ÓÏÂÉÒÁÅÔÓÑ ÐÅÒÅÚÁÇÒÕÚÉÔØÓÑ.\n"
-#~ "\n"
-#~ "ðÏÓÌÅ ÐÅÒÅÚÁÇÒÕÚËÉ, ×ÁÛÁ ÎÏ×ÁÑ ÓÉÓÔÅÍÁ Mandrake Linux ÚÁÇÒÕÚÉÔÓÑ "
-#~ "Á×ÔÏÍÁÔÉÞÅÓËÉ.\n"
-#~ "åÓÌÉ ÈÏÔÉÔÅ ÚÁÇÒÕÚÉÔØ ÄÒÕÇÕÀ ÏÐÅÒÁÃÉÏÎÎÕÀ ÓÉÓÔÅÍÕ, ÞÉÔÁÊÔÅ \n"
-#~ "ÄÏÐÏÌÎÉÔÅÌØÎÙÅ ÉÎÓÔÒÕËÃÉÉ."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "þÅÛÓËÉÊ (ðÒÏÇÒÁÍÍÉÓÔÙ)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "óÌÏ×ÁÃËÉÊ (ðÒÏÇÒÁÍÍÉÓÔÙ)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "éÍÑ ÓÏÚÄÁ×ÁÅÍÏÇÏ ÐÒÏÆÉÌÑ:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "úÁÐÉÓÁÔØ /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "æÏÒÍÁÔÉÒÏ×ÁÔØ ×ÓÅ"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ðÏÓÌÅ ÆÏÒÍÁÔÉÒÏ×ÁÎÉÑ ×ÓÅÈ ÒÁÚÄÅÌÏ×,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "×ÓÅ ÄÁÎÎÙÅ × ÜÔÉÈ ÒÁÚÄÅÌÁÈ ÂÕÄÕÔ ÐÏÔÅÒÑÎÙ"
-
-#~ msgid "Reload"
-#~ msgstr "ðÅÒÅÚÁÇÒÕÚÉÔØ"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "èÏÔÉÔÅ ÓÇÅÎÅÒÉÒÏ×ÁÔØ ÓÁÍÏ-ÕÓÔÁÎÁ×ÌÉ×ÁÀÝÕÀÓÑ ÄÉÓËÅÔÕ ÄÌÑ ËÌÏÎÉÒÏ×ÁÎÉÑ "
-#~ "linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "îÁÓÔÒÏÊËÁ ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "ó ÕÄÁÌÅÎÎÙÍ ÓÅÒ×ÅÒÏÍ ÐÅÞÁÔÉ CUPS, ×ÁÍ ÎÅ ÎÕÖÎÏ ÚÄÅÓØ ÎÁÓÔÒÁÉ×ÁÔØ\n"
-#~ "ÎÉËÁËÉÈ ÐÒÉÎÔÅÒÏ×; ÐÒÉÎÔÅÒÙ ÂÕÄÕÔ ÏÂÎÁÒÕÖÅÎÙ Á×ÔÏÍÁÔÉÞÅÓËÉ,\n"
-#~ "ÅÓÌÉ ÔÏÌØËÏ ×ÁÛ ÓÅÒ×ÅÒ ÎÅ ÎÁÈÏÄÉÔÓÑ × ÄÒÕÇÏÊ ÓÅÔÉ; × ÐÏÓÌÅÄÎÅÍ ÓÌÕÞÁÅ\n"
-#~ ", ×ÁÍ ÎÕÖÎÏ ÕËÁÚÁÔØ IP ÁÄÒÅÓ ÓÅÒ×ÅÒÁ CUPS \n"
-#~ "É, ×ÏÚÍÏÖÎÏ, ÎÏÍÅÒ ÐÏÒÔÁ."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "õÄÁÌÅÎÎÁÑ ÏÞÅÒÅÄØ"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "éÍÑ ÄÏÍÅÎÁ"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "îÅÔ ÐÒÉÎÔÅÒÁ"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "íÏÎÉÔÏÒÉÎÇ ÓÅÔÉ"
-
-#~ msgid "Profile "
-#~ msgstr "ðÒÏÆÉÌØ "
-
-#~ msgid "Statistics"
-#~ msgstr "óÔÁÔÉÓÔÉËÁ"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "óËÏÒÏÓÔØ ÏÔÐÒÁ×ËÉ: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "óËÏÒÏÓÔØ ÐÏÌÕÞÅÎÉÑ: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "ôÉÐ ÓÏÅÄÉÎÅÎÉÑ: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "óÏÅÄÉÎÑÅÍÓÑ Ó ÉÎÔÅÒÎÅÔ "
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "ïÔÓÏÅÄÉÎÑÅÍÓÑ ÏÔ ÉÎÔÅÒÎÅÔ "
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "ïÛÉÂËÁ ÏÔÓÏÅÄÉÎÉÎÅÎÉÑ ÏÔ ÉÎÔÅÒÎÅÔ."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "ïÔÓÏÅÄÉÎÅÎÉÅ ÏÔ ÉÎÔÅÒÎÅÔ ÚÁ×ÅÒÛÅÎÏ."
-
-#~ msgid "Connection complete."
-#~ msgstr "óÏÅÄÉÎÅÎÉÅ ÚÁ×ÅÒÛÅÎÏ."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "ïÛÉÂËÁ ÓÏÅÄÉÅÎÉÑ.\n"
-#~ "ðÒÏ×ÅÒØÔÅ ×ÁÛÉ ÎÁÓÔÒÏÊËÉ × ÐÁÎÅÌÉ ÕÐÒÁ×ÌÅÎÉÑ Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "ÏÔÐÒÁ×ÌÅÎÏ: "
-
-#~ msgid "received: "
-#~ msgstr "ÐÏÌÕÞÅÎÏ: "
-
-#~ msgid "Default Runlevel"
-#~ msgstr "RunLevel ÐÏ ÕÍÏÌÞÁÎÉÀ"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "îÅ ÕÄÁÅÔÓÑ ÏÂÒÁÂÏÔÁÔØ ÓÏÄÅÒÖÉÍÏÅ ÆÁÊÌÁ ÎÁÓÔÒÏÅË."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "îÅÒÁÓÐÏÚÎÁÎÎÙÊ ÆÁÊÌ ÎÁÓÔÒÏÅË"
-
-#~ msgid "Adapter"
-#~ msgstr "áÄÁÐÔÅÒ"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "÷ÙËÌÀÞÉÔØ"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "÷ËÌÀÞÉÔØ"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "óÅÊÞÁÓ ×Ù ÍÏÖÅÔÅ ÐÒÏ×ÅÒÉÔØ ×ÁÛÕ ÍÙÛØ. éÓÐÏÌØÚÕÊÔÅ ËÎÏÐËÉ É ËÏÌÅÓÉËÏ ÄÌÑ "
-#~ "ÐÒÏ×ÅÒËÉ\n"
-#~ "ÐÒÁ×ÉÌØÎÏÓÔÉ ÎÁÓÔÒÏÅË. åÓÌÉ ÏÎÉ ÎÅ ×ÅÒÎÙ, ÎÁÖÍÉÔÅ ÎÁ \"ïÔÍÅÎÁ\" ÄÌÑ "
-#~ "×ÙÂÏÒÁ\n"
-#~ "ÄÒÕÇÏÇÏ ÄÒÁÊ×ÅÒÁ."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (ÉÌÉ ADSL) ÓÏÅÄÉÎÅÎÉÅ"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "úÁËÒÙÔØ"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "÷Ù ÍÏÖÅÔÅ ÎÁÐÒÑÍÕÀ ÕËÁÚÁÔØ ÁÄÒÅÓ ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ ÐÒÉÎÔÅÒÁ × CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "äÁ, ÎÁÐÅÞÁÔÁÔØ ÐÒÏÂÎÕÀ ÓÔÒÁÎÉÃÕ ÔÅËÓÔÁ ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "äÁ, ÎÁÐÅÞÁÔÁÔØ ÐÒÏÂÎÕÀ ÓÔÒÁÎÉÃÕ ÔÅËÓÔÁ PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "òÁÚÍÅÒ ÂÕÍÁÇÉ"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "õÄÁÌÑÔØ ÂÕÍÁÇÕ ÐÏÓÌÅ ÐÅÞÁÔÉ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ðÁÒÁÍÅÔÒÙ ÄÒÁÊ×ÅÒÁ Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ðÁÒÁÍÅÔÒÙ ÇÌÕÂÉÎÙ Ã×ÅÔÁ"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "ðÅÞÁÔÁÔØ ÔÅËÓÔ ËÁË PostScript"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "éÓÐÒÁ×ÌÑÔØ \"ÓÔÕÐÅÎÞÁÔÕÀ ÐÅÞÁÔØ\"?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "ëÏÌÉÞÅÓÔ×Ï ÓÔÒÁÎÉà ÎÁ ÌÉÓÔÅ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "ðÒÁ×ÏÅ/ìÅ×ÏÅ ÐÏÌÅ × ÐÕÎËÔÁÈ (1/72 ÄÀÊÍÁ)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "÷ÅÒÈÎÅÅ/îÉÖÎÅÅ ÐÏÌÅ × ÐÕÎËÔÁÈ (1/72 ÄÀÊÍÁ)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "äÏÐÏÌÎÉÔÅÌØÎÙÅ ÐÁÒÁÍÅÔÒÙ ÄÌÑ GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "äÏÐÏÌÎÉÔÅÌØÎÙÅ ÐÁÒÁÍÅÔÒÙ ÄÌÑ ÔÅËÓÔÁ"
-
-#~ msgid "Reverse page order"
-#~ msgstr "ïÂÒÁÔÎÙÊ ÐÏÒÑÄÏË ÓÔÒÁÎÉÃ"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "÷ÙÂÏÒ ÔÉÐÁ ÕÄÁÌÅÎÎÏÇÏ ÐÏÄËÌÀÞÅÎÉÑ ÐÒÉÎÔÅÒÁ"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "ëÁÖÄÏÍÕ ÐÒÉÎÔÅÒÕ ÔÒÅÂÕÅÔÓÑ ÉÍÑ (ÎÁÐÒÉÍÅÒ, lp).\n"
-#~ "äÏÐÏÌÎÉÔÅÌØÎÙÅ ÐÁÒÁÍÅÔÒÙ, ÔÁËÉÅ ËÁË ÏÐÉÓÁÎÉÅ ÐÒÉÎÔÅÒÁ É ÅÇÏ "
-#~ "ÍÅÓÔÏÎÁÈÏÖÄÅÎÉÑ\n"
-#~ "ÔÁË ÖÅ ÍÏÇÕÔ ÂÙÔØ ÚÁÄÁÎÙ. ëÁËÏÅ ÉÍÑ ÂÕÄÅÔ ÉÓÐÏÌØÚÏ×ÁÎÏ ÄÌÑ ÄÁÎÎÏÇÏ "
-#~ "ÐÒÉÎÔÅÒÁ É\n"
-#~ "ËÁË ÏÎ ÐÏÄÓÏÅÄÉÎÅÎ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "ëÁÖÄÁÑ ÏÞÅÒÅÄØ ÐÅÞÁÔÉ, × ËÏÔÏÒÕÀ ÐÏÍÅÝÁÀÔÓÑ ÚÁÄÁÎÉÑ ÄÌÑ ÐÅÞÁÔÉ, ÔÒÅÂÕÅÔ "
-#~ "ÕËÁÚÁÎÉÑ ÉÍÅÎÉ (ÏÂÙÞÎÏ lp) É Ó×ÑÚÁÎÎÏÇÏ Ó ÎÅÊ ËÁÔÁÌÏÇÁ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ. "
-#~ "õËÁÖÉÔÅ ÉÍÑ É ËÁÔÁÌÏÇ ÏÞÅÒÅÄÉ ÐÅÞÁÔÉ, Á ÔÁËÖÅ ÓÐÏÓÏÂ, ËÏÔÏÒÙÍ ÐÏÄÓÏÅÄÉÅÎ "
-#~ "ÐÒÉÎÔÅÒ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "éÍÑ ÏÞÅÒÅÄÉ"
-
-#~ msgid "Spool directory"
-#~ msgstr "ëÁÔÁÌÏÇ spool"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "ÏÛÉÂËÁ ÍÏÎÔÉÒÏ×ÁÎÉÑ: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "þÔÏÂÙ ÐÏ×ÙÓÉÔØ ÂÅÚÏÐÁÓÎÏÓÔØ ÓÉÓÔÅÍÙ, ÎÁÄÏ ×ÙÂÒÁÔØ \"éÓÐÏÌØÚÏ×ÁÔØ ÓËÒÙÔÙÊ "
-#~ "ÆÁÊÌ\" \n"
-#~ "É \"éÓÐÏÌØÚÏ×ÁÔØ ÐÁÒÏÌÉ MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "åÓÌÉ × ×ÁÛÅÊ ÓÅÔÉ ÉÓÐÏÌØÚÕÅÔÓÑ NIS, ×ÙÂÅÒÉÔÅ \"éÓÐÏÌØÚÏ×ÁÔØ NIS\". åÓÌÉ \n"
-#~ "ÎÅ ÚÎÁÅÔÅ, ÓÐÒÏÓÉÔÅ ÁÄÍÉÎÉÓÔÒÁÔÏÒÁ ÓÅÔÉ."
-
-#~ msgid "yellow pages"
-#~ msgstr "ÖÅÌÔÙÅ ÓÔÒÁÎÉÃÙ"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "áÄÒÅÓ ÐÅÒ×ÏÇÏ DNS ÓÅÒ×ÅÒÁ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "áÄÒÅÓ ×ÔÏÒÏÇÏ DNS ÓÅÒ×ÅÒÁ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "ëÁË ×Ù ÈÏÔÉÔÅ ÐÏÄÓÏÅÄÉÎÉÔØÓÑ Ë éÎÔÅÒÎÅÔ?"
diff --git a/perl-install/share/po/sk.po b/perl-install/share/po/sk.po
deleted file mode 100644
index 62d13d0af..000000000
--- a/perl-install/share/po/sk.po
+++ /dev/null
@@ -1,11152 +0,0 @@
-# Translatrion file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Jan Matis <damned@hq.alert.sk>, 2000
-# Pavol Cvengros <orpheus@hq.alert.sk>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-17 23:14+0100\n"
-"Last-Translator: Jan Matis <matis@hq.alert.sk>\n"
-"Language-Team: sk <i18n@hq.alert.sk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Nastavi» v¹etky hlavy osobitne"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Pou¾i» Xinerama roz¹írenie"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Nastavi» iba kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Nastavenie \"viac-hláv\""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vá¹ systém podporuje nastevenie pre \"viac hláv\".\n"
-"Èo chcete spravi»?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafická karta"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Zvoµte grafickú kartu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Zvoµte X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Zvoµte X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Akú konfiguráciu XFree chcete ma»?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a karta má podporu hardwarovej 3D akcelerácie ale iba v XFree %s.\n"
-"Va¹a karta je podporovaná XFree %s, ktoré majú lep¹iu podporuj v 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va¹a karta má podporu hardwarovej 3D akcelerácie v XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s 3D hardwerovou akceleráciou"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va¹a karta má podporu hardwarovej 3D akcelerácie ale iba v XFree %s.\n"
-"POZOR, TÁTO PODPORA JE IBA EXPERIMENTÁLNA A MO®E SPOSOBI« ZAMRZNUTIE "
-"POÈÍTAÈA."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENTÁLNOU 3D akceleráciou"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a karta má podporu hardwarovej 3D akcelerácie ale iba v XFree %s.\n"
-"POZOR, TÁTO PODPORA JE IBA EXPERIMENTÁLNA A MO®E SPOSOBI« ZAMRZNUTIE "
-"POÈÍTAÈA.\n"
-"Va¹a karta je podporovaná XFree %s, ktoré majú lep¹iu podporuj v 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ovládaè obrazovky pre in¹taláciu)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigurácia"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Zvoµte veµkos» grafickej pamäti"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Zvoµte parametre servra"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Zvoµte monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritické parametre sú vertikálna frekvencia (frekvencia, ktorou je "
-"obnovovaná celá obrazovka) a horizontálna frekvencia (frekvencia, ktorou sú "
-"zobrazované jednotlivé riadky).\n"
-"Je veµmi dôle¾ité, aby ste nenastavili frekvencie, ktoré prevy¹ujú "
-"schopnosti vá¹ho monitora. Mohol by sa po¹kodi».\n"
-"Ak ste si nie celkom istý, zvoµte rad¹ej slab¹ie nastavenie."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontálna frekvencia"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikálna frekvencia"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Nie je nastavený monitor"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Nie je nastavená grafická karta"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Nie sú nastavené grafické rozlí¹enia"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Otestova» konfiguráciu?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Varovanie: Testovanie tejto grafickej karty mô¾e spôsobi» zamrznutie systému"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test konfigurácie"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"skúste zmeni» niektoré parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Vyskytla sa chyba"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Návrat za %d sekúnd"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Je toto správne nastavenie?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Vyskytla sa chyba, skúste zmeni» niektoré parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rozlí¹enie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Zvoµte rozlí¹enie a farebnú håbku"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafická karta: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Viac"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Expertný mód"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Zobraz v¹etko"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rozlí¹enia"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Nastavenie klávesnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ my¹i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Port my¹i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontálna frekvencia monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikálna frekvencia monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafická karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikácia Grafickej karty: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafická pamä»: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farebná håbka: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozlí¹enie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovládaè: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pripravujem konfiguráciu X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Èo chcete robi»?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Zmeò monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Zmeò grafickú kartu"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Zmeò parametre servra"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Zmeò rozlí¹enie"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Zobraz informácie"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Skús znova"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Koniec"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachova» zmeny?\n"
-"Aktuálna konfigurácia je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X pri ¹tarte"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mô¾em nastavi» vá¹ poèítaè aby po re¹tarte automaticky spú¹»al X.\n"
-"Chcete ma» spustené X-Windows po re¹tarte poèítaèa?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Prosím, prihláste sa znova do %s aby ste aktivovali zmeny"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Prosím, odhláste sa a potom stlaète Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farieb (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisíc farieb (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisíc farieb (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliónov farieb (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy farieb (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB a viac"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "©tandardná VGA, 640×480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800×600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibilná, 1024×768 @ 87 Hz prekladane (nie je 800×600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024×768 @ 87 Hz prekladane, 800×600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Roz¹írená Super VGA, 800×600 @ 60 Hz, 640×480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprekladaná SVGA, 1024×768 @ 60 Hz, 800×600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Vysoko frekvenèná SVGA, 1024×768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor, ktorý doká¾e 1280×1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor, ktorý doká¾e 1280×1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor, ktorý doká¾e 1280×1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, ktorý doká¾e 1600×1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, ktorý doká¾e 1600×1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvý sektor zavádzacieho oddielu"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvý sektor disku (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "In¹talácia SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam si ¾eláte nain¹talova» zavádzaè?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "In¹talácia lilo/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO s textovym menu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickým menu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "©tart z DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Hlavné parametre zavádzaèa"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Pou¾i» zavádzaè"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "In¹talácia zavádzaèa"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot zariadenie"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nepracuje správne so star¹ími BIOSmi)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktná"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktná"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mód"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pauza pred ¹tartom predvoleného jadra"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Heslo"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Heslo (znovu)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Obmedz voµby príkazového riadku"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "obmedz"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Vyèisti» /tmp pri ka¾dom ¹tarte"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presná veµkos» pamäti (na¹iel som %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Dovoli» multi profily"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Zadajte veµkos» pamäti v Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Parameter ``Restrict command line options'' je bez pou¾itia hesla vypnutý"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Prosím skúste znovu"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Heslo nesúhlasí"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Inicializaèná správa"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Oneskorenie pre ¹tart kernelu"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Povoli» ¹tart z CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Povoli» ¹tart z OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Predvolený OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Momentálne sa tu nachádzajú tieto záznamy.\n"
-"Mô¾ete pridáva» ïal¹ie, alebo meni» existujúce."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Pridaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hotovo"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifikova»"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Aký typ záznamu chcete prida»"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Iný OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Iný OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Iný OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Obraz"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Pridaj"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Èítanie/Zápis"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabuµka"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nie celkom bezpeèný"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Záznam"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Predvoµba"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-veµkos»"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Bez videa"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Odstráò záznam"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prázdny záznam nie je dovolený"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Musíte zada» súbor s jadrom"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Musíte nastavi» koreòový oddiel"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Tento záznam je u¾ pou¾itý"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Na¹iel som %s %s rozhranie"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Máte e¹te nejaké ïal¹ie?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Máte nejaké %s rozhranie?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nie"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Áno"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Prezrite si informácie o technických prostriedkoch"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "In¹talujem ovládaè pre %s kartu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Ktorý %s ovládaè mám skúsi»?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Ovládaè %s niekedy potrebuje pre správnu èinnos» doplnkovú informáciu, aj\n"
-"keï zvyèajne pracuje správne aj bez nej. ®eláte si zada» doplnkové voµby,\n"
-"alebo dovolíte ovládaèu otestova» vá¹ poèítaè a údaje si zisti»? Obèas sa\n"
-"stane, ¾e toto testovanie poèítaè zablokuje, ale nemalo by spôsobi» ¾iadnu "
-"¹kodu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatické zistenie"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Zadajte voµby"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Teraz mô¾ete zada» parametre pre modul %s.\n"
-"Parametre sú vo formáte ``meno=hodnota meno2=hodnota2 ...''.\n"
-"Napríklad: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Parametre modulu:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nahrávanie modulu %s zlyhalo.\n"
-"Chcete sa o to pokúsi» znova s inými parametrami?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "prístup ku X programom"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "prístup ku rpm nástrojom"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dovoli» \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "prístup ku konfiguraèným súborom"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(u¾ pridaný %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Toto heslo je príli¹ jednoduché"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Prosím zadajte u¾ívateµské meno"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "U¾ívateµské meno mô¾e obsahova» len malé písmená, èíslice, `-' a `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Takýto u¾ívateµ je u¾ pridaný"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Pridaj u¾ívateµa"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Zadajte u¾ívateµa\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Akceptuj u¾ívateµa"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Reálne meno"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "U¾ívateµské meno"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mô¾em nastavi» vá¹ poèítaè, aby sa po re¹tarte automaticky prihlásil\n"
-"jeden u¾ívateµ. ®eláte si túto mo¾nos»?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Zvoµte predvoleného u¾ivateµa:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si window mana¾éra:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Prosím, zvoµte jazyk, ktorý chcete pou¾íva»."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Mô¾ete zvoli» ïal¹ie jazyky pou¾iteµné po in¹talácii"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "V¹etko"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dovoµ v¹etkým  u¾ívateµom"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Vlastný výber"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Bez zdielania"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Je potrebné in¹talova» balík %s. Súhlasíte ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Zdielanie mô¾e by» cez Sambu alebo NFS. Ktoré si ¾eláte ?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Chýba povinný balík %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Zru¹"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "®iadna"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Veµmi slabá"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "©tandardné"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Vysoká"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Vysoká"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidná"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Táto úroveò by mala by» pou¾ívaná opatrne. Zjednodu¹uje prácu so systémom,\n"
-"ale nemal by by» pripojený k iným poèítaèom, alebo k internetu. Nie sú\n"
-"toti¾ pou¾ívané ¾iadne heslá."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Je nastavené pou¾ívanie hesiel, ale pou¾itie tohoto poèítaèa v sieti nemô¾em "
-"doporuèi»."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Toto je ¹tandardná úroveò bezpeènosti pre poèítaè, ktorý je pou¾ívaný\n"
-"pre pripojenie k internetu ako klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"S touto úrovòou bezpeènosti sa stáva systém pou¾iteµný ako sie»ový server."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Zalo¾ené na predo¹lej úrovni, ale systém je úplne uzavretý.\n"
-"Bezpeènos» je na najvy¹¹ej mo¾nej úrovni."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Voµba bezpeènostnej úrovne"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Úroveò bezpeènosti"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Pou¾i libsafe pre servre"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Kni¾nica, ktorá bráni proti útokom typu buffer overflow a format string."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Vitajte v zavadzaci operacneho systemu %s!\n"
-"\n"
-"Vyberte si operacy system ktory chcete spusti, alebo \n"
-"cakajte %d sekund pre predvolenu akciu.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vitajte v zavadzaci operacneho systemu GRUB"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pouzite klavesy %c a %c pre oznacenie zaznamu zviraznenim"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stlacte enter pre zavedenie oznaceneho OS, 'e' pre upravu"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "prikazov pred zavedenim, alebo 'c' pre prikazovy riadok"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceny OS bude zavedeny za %d sekund."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nie je dos» miesta v /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "©tart menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Na oddiel %s nemô¾ete nain¹talova» zavádzaè\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoc zatiaµ nebola implementovaná.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfigurácia ¹týlu ¹tartovania"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Súbory"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Súbor/_Koniec"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nový ¹týl kategórii monitorov"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nový ¹týl monitora"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "©tandardný monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "©tandardný Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Spusti» Auroru pri ¹tarte"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub mód"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mód"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Momentálne pou¾ívate %s ako ¹tartovací mana¾ér.\n"
-"Kliknite na Konfigurácia pre spustenie sprievodcu nastavením."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurácia"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Mód systému"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Spusti» X-Window systém pri ¹tarte"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nie, nechcem automatické prihlásenie"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Áno, chcem automatické prihlásenie s (u¾ivateµ, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nemô¾em otvori» /etc/inittab na èítanie: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minút"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minúta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekúnd"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Nemô¾em robi» kópie obrazovky pred rozdelením disku"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Kópie obrazovky budú po in¹talácii dostupné v %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francúzsko"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kostarika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgicko"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Èeská republika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Nemecko"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grécko"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Nórsko"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "©védsko"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holandsko"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Taliansko"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Rakúsko"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Spojené ¹táty"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Prosím, najprv si za zálohujte va¹e dáta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Èítajte pozorne!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ak plánujete pou¾i» ABOOT, nechajte prosím na zaèiatku disku dos» voµného "
-"miesta.\n"
-"(2048 sektorov bude staèi»)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Chyba"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Sprievodca"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Zvoµ akciu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Máte jeden veµký FAT diskový oddiel\n"
-"(pou¾ívaný MS DOSom alebo WINDOWS).\n"
-"Navrhujem zmeni» jeho veµkos»\n"
-"(kliknite naò, potom kliknite na \"Zmeò veµkos»\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Prosím kliknite na oddiel"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaily"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "®urnálovací súborový systém"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prázdna"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Iná"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Typ súborového systému:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Vytvor"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Namiesto toho pou¾ite `%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Zru¹"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najprv spravte `Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Po zmene diskovej oblasti %s budú v¹etky dáta na tejto oblasti nenávratne "
-"stratené"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Zvoµte oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Zvoµte iný oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Koniec"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Prepni do expert módu"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prepni do normálneho módu"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Spä»"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Pokraèova»?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Koniec bez ulo¾enia"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Koniec bez zmeny partition tabuµky?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "®eláte si ulo¾i» zmeny do /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automaticky prerozdeµ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Zma¾ v¹etko"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informácie o pevnom disku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "V¹etky primárne oddiely sú u¾ pou¾ité"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nemô¾em prida» ïal¹í oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ak chcete ma» viac diskových oddielov, tak zma¾te jeden z nich, aby sa dal "
-"vytvori» roz¹írený oddiel disku"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Ulo¾ tabuµku rozdelenia disku"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Obnov tabuµku rozdelenia disku"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Obnovi» tabuµku rozdelenia disku"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Znovunaèíta» tabuµku rozdelenia disku"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatické pripojenie vymeniteµného média"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Vyber súbor"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Zálo¾ná tabuµka rozdelenia disku nemá rovnakú veµkos»\n"
-"Naozaj pokraèova»?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varovanie"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vlo¾te disketu do mechaniky\n"
-"V¹etky dáta na tejto diskete budú nenávratne stratené"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pokú¹am sa obnovi» partition tabuµku"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detailné informácie"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Bod pripojenia"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Parametre"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Zmeò veµkos»"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Presuò"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formát"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Pripoj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Pridaj do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Pridaj do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odpoj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Odober z RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Odober z LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifikuj RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Pou¾i loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Vytvor nový oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Poèiatoèný sektor:"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Veµkos» v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Typ súborového systému: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Bod pripojenia: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Odstráni» loopback súbor?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Zvoµte typ oddielu"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Aký typ súborového systému chcete??"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Prepínam z ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam si ¾eláte pripoji» loopback súbor %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam si ¾eláte pripoji» zariadenie %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nemô¾em odpoji» oddiel kým je pou¾ívaný nejakou spätnou sluèkou.\n"
-"Odstráòte najskôr spätnú sluèku"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Poèítam hranice FAT súborového systému"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mením veµkos»"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Tomuto oddielu sa nedá meni» veµkos»?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "V¹etky dáta na tejto oblasti by sa mali zazálohova»"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Po zmene veµkosti oddielu %s budú v¹etky dáta nenávratne stratené"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Zvolte novú veµkos»"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nová veµkos» v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Ktorý disk si ¾eláte posunú»?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Ktorý sektor si ¾eláte posunú»?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Presúvam"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Presúvam oddiel..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Vyberte existujúci RAID pre pridanie"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nový"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Vyberte existujúci LVM pre pridanie"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM meno?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Tento oddiel nemô¾e by» pou¾itý pre spätnú sluèku"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Spätná sluèka"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Meno súboru spätnej sluèky: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Zadajte meno súboru"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Súbor je u¾ pou¾ívaný inou spätnou sluèkou, skúste iný súbor"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Súbor existuje. Pou¾i»?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Parametre pripojenia"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Rozdielne"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "zariadenie"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "úroveò"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "veµkos»"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Buïte opatrní: táto operácia je nebezpeèná."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Aký typ rozdelenia oddielov?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Prepáète, ale nemô¾em akceptova» vytvorenie /boot tak ïaleko na disku (na "
-"valci > 1024).\n"
-")Pou¾ívate LILO a tým pádom to nebude pracova», alebo ho nepou¾ívate a tým "
-"pádom nepotrebujete /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Oddiel, ktorý chcete prida» ako root (/) sa na disku fyzicky nachádza a¾ za "
-"valcom 1024, a nemáte zadefinovaný oddiel /boot. \n"
-"Ak plánujete pou¾i» LILO, prosím pridajte najprv oddiel /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Nastavili ste softvérový RAID oddiel ako koreòový (/).\n"
-"®iaden zavádzaè systému nedoká¾e zavies» systém bez /boot oddielu.\n"
-"Preto dbajte na pridanie /boot oddielu"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partition tabuµka zariadenia %s sa zapí¹e na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby sa úpravy prejavili, musíte re¹tartova» poèítaè"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ak naformátujete oddiel %s,v¹etky predo¹lé dáta sa na òom stratia"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formátuje sa"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formátuje sa loopback súbor %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formátuje sa oddiel %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Skryté súbory"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Prenes súbory na nový oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Adresár %s u¾ obsahuje nejaké dáta\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Prenos súborov na nový oddiel"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopírujem %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Odstraòujem %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "oddiel %s sa teraz volá %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Zariadenie:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Oznaèenie v DOSe: %s (asi)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Meno: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Zaèiatok: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Veµkos»: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorov"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Od cylindra %d po cylinder %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Naformátované\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nenaformátované\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Pripojené\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback súbor(y):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Predvolený oddiel pre ¹tart\n"
-"    (MS-DOS boot, nie pre lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Hladina %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Veµkos» kúsku %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Meno loopback súboru: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mo¾nosti sú, tento oddiel je\n"
-"ovládaci oddiel, mali by ste\n"
-"ho nechca» samotný.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento ¹pecialny Bootstrap\n"
-"oddiel je pre\n"
-"duálne ¹tartovanie systému.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veµkos»: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cylindrov, %s hlavièiek, %s sektorov\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info:"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ partition tabuµky: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na zbernici %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Mo¾nosti: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Kryptovací kµúè súborového systému"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Zvoµte kryptovací kµúè súborového systému"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Tento kryptovací kµúè je príli¹ jednoduchý (musí by» minimálne %d znakov "
-"dlhé)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "kryptovacie kµúèe nesúhlasia"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Kryptovací kµúè"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Kryptovací kµúè (znovu)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Zmeòte typ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Prosím kliknite na médium"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS server"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formátovanie %s zlyhalo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nedoká¾em formátova» %s na typ %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck zlyhalo s exit kódom %d alebo signálom %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojenia %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednoduché"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Na oddiely men¹ie ako 16MB nemô¾ete pou¾i» JFS"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Na oddiely men¹ie ako 32MB nemô¾ete pou¾i» ReiserFS"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Body pripojenia musia zaèína» /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Oddiel s bodom pripojenia %s u¾ existuje\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nemô¾ete pou¾i» logický zväzok LVM pre bod pripojenia %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adresár by mal osta» na rootovskom súborovom systéme"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Pre tento bod pripojenia potrebujete ozajstný súborový systém(ext2, "
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nemô¾ete pou¾i» kryptovaný súborový systém pre bod pripojenia %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nedostatok miesta pre automatickú alokáciu"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nerobi» niè"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba otvárania %s pre zápis: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Vyskytla sa chyba - neboli nájdené ¾iadne platné zariadenia, na ktorých je "
-"mo¾né vytvori» nové súborové systémy. Skontrolujte vá¹ hardvér pre zistenie "
-"príèiny problému."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemáte ¾iadny oddiel disku!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Teraz by ste mali zvoli» slu¾by, ktoré chcete spú¹»a» pri ¹tarte.\n"
-"\n"
-"\n"
-"Ak plánujete pou¾íva» tento poèítaè ako server prístupný z internetu, mali "
-"by ste\n"
-"povoli» iba slu¾by ktoré naozaj potrebujete. "
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Teraz mô¾ete zvoli», kam si ¾eláte in¹talova» Linux Mandrake.\n"
-"Ak je pevný disk prázdny, alebo ak iný operaèný systém zaberá\n"
-"v¹etok pou¾iteµný priestor, treba disk rozdeli».\n"
-"\n"
-"\n"
-"Preto¾e je efekt rozdelovacieho procesu nenávratný, prerozdelenie\n"
-"disku mô¾e byt pre neskúsených u¾ívateµov stresujúce. Tento nástroj\n"
-"rozdeµovanie disku zjednodu¹uje.\n"
-"\n"
-"\n"
-"Potrebujete minimálne dva oddiely. Jeden pre operaèný systém a jeden\n"
-"pre virtuálnu pamä» (tie¾ nazývaný swap)."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Ka¾dý novo definovaný diskový oddiel musí by» naformátovaný.\n"
-"Formátovanie znamená vytváranie súborového systému.\n"
-"\n"
-"\n"
-"Teraz mô¾ete zvoli», èi si ¾eláte formátova» existujúce oddiely aby ste "
-"odstránili\n"
-"dáta, ktoré sa na nich nachádzajú. Ak si to ¾eláte, zvoµte prosím oddiely, "
-"ktoré\n"
-"si ¾eláte formátova».\n"
-"\n"
-"\n"
-"Nieje nutné opätovne formátova» v¹etky existujúce oddiely. Urèite musíte\n"
-"formátova» oddiely obsahujúce operaèný systém (napríklad  \"/\", \"/usr\",\n"
-"alebo \"/var\"  ). Nemusíte v¹ak formátova» oddiely obsahujúce dáta, ktoré\n"
-"chcete zachova» (typicky \"/home\")\n"
-"\n"
-"\n"
-"Pri voµbe oddielov na formátovanie buïte opatrný. V¹etky dáta na "
-"formátovanom\n"
-"oddiely budú nenávratne stratené.\n"
-"\n"
-"\n"
-"Kliknite na \"OK\" ak ste pripravený formátova» vybrané oddiely. \n"
-"\n"
-"\n"
-"Kliknite na \"Zru¹\" ak chcete zvoli» iné oddiely pre in¹taláciu."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Teraz sa in¹taluje vá¹ nový operaèný systém Linux Mandrake.\n"
-"V závislosti na mno¾stve balíèkov a rýchlosti vá¹ho poèítaèa\n"
-"mô¾e táto operácia trva» od niekoµkých minút a¾ po rádovo hodiny.\n"
-"\n"
-"Prosím buïte trpezlivý."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Pred tým, ne¾ budete pokraèova», mali by ste si pozorne preèíta»\n"
-"licenèné podmienky. Pokrývajú celú distribúciu Linux Mandrake\n"
-"a ak nesúhlasíte so v¹etkými z nich kliknite na tlaèitlo \"Odmietni\".\n"
-"To okam¾ite ukonèí in¹taláciu. Pre pokraèovanie v in¹talácii\n"
-"stlaète tlaèidlo \"Akceptuj\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Prosím buïte trpezlivý. Táto operácia mô¾e trva» niekoµko minút."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Prosím zvoµte  \"Install\" ak nemáte nain¹talovanú predo¹lú verziu Mandrake "
-"Linux-u\n"
-"alebo ak chcete pou¾íva» viac operaèných systémov.\n"
-"\n"
-"\n"
-"Prosím zvoµte  \"Update\" ak si ¾eláte obnovi» u¾ nain¹talovanú star¹iu "
-"verziu Mandrake Linux-u.\n"
-"\n"
-"\n"
-"V závislosti od va¹ich skúseností s GNU/Linux-om mô¾ete zvolit jednu z  "
-"nasledujúcich úrovní in¹talácie\n"
-"\n"
-"* Recommended: Ak ste e¹te nikdy nein¹talovali GNU/Linux, zvoµte túto "
-"mo¾nos». In¹talácia bude\n"
-" veµmi jednoduchá a budete musie» odpoveda» len na niekoµko otázok.\n"
-"\n"
-"\n"
-"* Customized: ak ste sa u¾ s GNU/Linux-om stretli, mô¾ete si zvoli» základné "
-"pou¾itie vá¹ho poèítaèa \n"
-" (pracovná stanica, server, vývojová stanica). Budete tie¾ musie» odpoveda» "
-"na viac otázok ako pri \n"
-" Recomended úrovni in¹talácie.\n"
-"\n"
-"\n"
-"* Expert: Ak máte naozaj dostatoèné skúsenosti s GNU/Linux-om, mô¾ete zvoli» "
-"túto triedu in¹talácie.\n"
-" Tak ako v Customized si budete môc» zvoli» základné pou¾itie vá¹ho poèítaèa "
-"(pracovná stanica, server,\n"
-" vývojová stanica). Budete ma» mo¾nos» ovplyvni» mnoho detailov in¹talácie "
-"ale mô¾e sa Vám sta», ¾e \n"
-" nebudete vedie» odpoveda» na niektoré otázky. Preto nepou¾ívajte túto "
-"úroveò in¹talácie pokiaµ sa v \n"
-" GNU/Linux-e naozaj nevyznáte."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Prosím zvoµte správny port. Napríklad COM1 pod MS Windows sa v\n"
-"GNU/Linux nazýva ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Musíte sa rozhodnú», kam umiestni» informácie potrebné pre spustenie\n"
-"systému.\n"
-"Pokiaµ presne neviete èo robi» zvoµte \"Prvý sektor disku (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sa pokúsi vyhµada» PCI SCSI radièe. Ak DrakX nájde SCSI\n"
-"adaptér a rozpozná aký ovládaè pou¾i», bude automaticky nain¹talovaný.\n"
-"\n"
-"\n"
-"Ak nemáte SCSI radiè, alebo máte (ISA, PCI) SCSI adaptér, ktorý DrakX\n"
-"nerozoznal. Budete musie» odpoveda» èi máte SCSI radiè. V prípade, ¾e\n"
-"zvolíte Áno, zobrazí sa zoznam ovládaèov z ktorých si budete môc» \n"
-"vybra» vhodný pre vá¹ SCSI radiè.\n"
-"\n"
-"\n"
-"V prípade, ¾e budete sami vybera» vhodný ovládaè, DrakX vám dá mo¾nos»\n"
-"¹pecifikova» jeho parametre. Taktie¾ budete musie» dovoli» test hardvéru\n"
-"na funkènos» ovládaèa a jeho parametrov."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Taktie¾ musíte naformátova» %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Zvolili ste nasledujúce slu¾by: %s\n"
-"\n"
-"\n"
-"Tieto slu¾by sa spú¹»ajú implicitne. Momentálne nemajú ¾iadne známe "
-"bezpeènostné\n"
-"chyby, ale v budúcnosti nejaké mô¾u by» nájdené. V tom prípade musíte prejs» "
-"na\n"
-"vy¹¹iu verziu èo najskôr.\n"
-"\n"
-"\n"
-"Naozaj si ¾eláte in¹talova» tieto slu¾by?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nemô¾em pou¾i» broadcast bez NIS domény"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Vlo¾te disketu s FAT formátom do mechaniky %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Táto disketa nemá FAT format"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pre pou¾itie tohto ulo¾eného výberu balíèkov, na¹tartujte in¹taláciu s "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "chyba pri èítaní zo súboru %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Nejaky hardware vo va¹om poèítaèi potrebuje ``proprietarne'' ovládaèe.\n"
-"Informácie mô¾ete nájs» na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musíte ma» koreòový oddiel.\n"
-"Vytvorte oddiel (alebo kliknite na existujúcu).\n"
-"Potom zvoµte akciu ``Bod pripojenia`` a nastavte na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Musíte nastavi» swap oddiel"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nevytvorili ste swap oddiel\n"
-"\n"
-"Napriek tomu pokraèova»?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musíte ma» FAT oddiel pripojený na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Pou¾i voµné miesto"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nedostatok voµného miesta pre vytvorenie nového oddielu"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Pou¾i existujúci oddiel"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Tu nieje ¾iadny pou¾iteµný oddiel"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Pou¾i oddiel s Windows pre loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ktorý oddiel chcete pou¾i» pre Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Zvoµte veµkosti"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Veµkos» koreòového oddielu v MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veµkos» oddielu v MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Pou¾i voµné miesto na Windows oddiele"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Ktorému oddielu chcete zmeni» veµkos»?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Poèítam hranice súborového systému pre Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Meniè veµkosti FAT nebol schopny pracova» s oddielom, \n"
-"nastala chyba: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va¹ oddiel s Windows je veµmi fragmentovaný, prosím spustite najprv  "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"POZOR!\n"
-"\n"
-"DrakX teraz ide zmeni» veµkos» vá¹ho Windows oddielu.\n"
-"Buïte opatrný: táto operácia je nebezpeèná. Ak ste tak e¹te\n"
-"neurobili, spustite najskôr pod Windows scandisk a defrag.\n"
-"Bolo by tie¾ vhodné zazálohova» va¹e dáta. \n"
-"Ak viete èo robíte, stlaète Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koµko chcete necha» pre windows"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "oddiel %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Neúspe¹ná zmena veµkosti FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nieje tu oddiel FAT, ktorému by sa dala zmeni» veµkos» alebo pou¾i» ho pre "
-"loopback (alebo tam nieje dostatok voµného miesta)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Vyma¾ celý disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Odstráni» Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Máte viac ako jeden disk, na ktorý chcete in¹talova» linux ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "V¹etky oddiely a dáta na nich budu stratené na disku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Vlastné rozdelenie disku"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Pou¾i» fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Teraz mô¾ete rozdeli» vá¹ pevný disk %s.\n"
-"Keï skonèíte, nezabudnite ulo¾i» zmeny pomocou `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemáte dostatok voµného miesta na oddiele s Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nemô¾em nájs» miesto pre in¹taláciu"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX sprievodca rozdelením disku na¹iel tieto rie¹enia:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Neúspe¹ne rozdeµovanie: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Spú¹»am prácu so sie»ou"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ukonèujem prácu so sie»ou"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Vyskytla sa chyba a neviem ju úplne vyrie¹i».\n"
-"Pokraèujte na vlastnú zodpovednos»."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvojnásobný bod pripojenia %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Niektoré dôle¾ité balíky neboli správne nain¹talované.\n"
-"Je mo¾né, ¾e sú po¹kodené vá¹ CD disk alebo mechanika.\n"
-"Skontrolujte to napríklad pou¾itím \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Vitajte v %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nie je dostupná ¾iadna floppy mechanika"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Spú¹»am krok %s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vá¹ systém má nedostatok prostriedkov. Mo¾no budete ma» problémy s\n"
-"in¹taláciou Mandrake Linux. Ak sa tak stane, skúste textovú in¹taláciu. Pre "
-"jej\n"
-"spustenie stlaète `F1' po na¹tartovaní z CDROMky a zadajte `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Trieda in¹talácie"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Prosím, zvoµte jednu z nasledujúcich tried in¹talácie: "
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Celková veµkos» skupín, ktoré ste oznaèili je pribli¾ne %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ak si ¾eláte in¹talova» menej ako je dané èíslo,\n"
-"zvoµte toµko percent balíkov, koµko uznáte za vhodné.\n"
-"\n"
-"Pri malých percentách sa budú in¹talova» iba naozaj dôle¾ité balíky\n"
-"a ak zvolíte 100%% nain¹taluje sa v¹etko."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na disku máte priestor iba pre %d%% z oznaèených balíkov.\n"
-"\n"
-"Ak si ¾eláte nain¹talova» menej,\n"
-"zvoµte toµko percent balíkov, koµko uznáte za vhodné.\n"
-"Pri malých percentách sa budú in¹talova» iba naozaj dôle¾ité balíky\n"
-"Ak necháte  %d%% nain¹taluje sa toµko balíkov, koµko bude mo¾né."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "V ïal¹om kroku budete ma» mo¾nos» nastavi» presnej¹ie"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentuálny poèet balíkov pre in¹taláciu"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Výber skupín balíkov"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Osobitná voµba balíkov"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celková veµkos»: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Chybný balík"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Meno: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veµkos»: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Dôle¾ité: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nemô¾ete oznaèi» tento balík preto¾e na jeho in¹taláciu nie je dos» miesta."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Budú nain¹talované nasledujúce balíky"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Nasledujúce balíky budú odstránené"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Mô¾ete oznaèi»/odznaèi» tento balík"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je jeden zo základných balíkov, nemô¾e by» odznaèený"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nemô¾ete odznaèi» tento balík. Je u¾ nain¹talovaný"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tento balík potrebuje nov¹iu verziu\n"
-"Ste si istý, ¾e ho chcete odznaèi»?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Nemô¾ete odznaèi» tento balík. Musíte prida» novú verziu"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Zobraz automaticky zvolené balíèky"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "In¹talácia"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Nahra»/Ulo¾i» na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Aktualizácia voµby balíèkov"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimálna in¹talácia"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Zvoµte balíky, ktoré chcete nain¹talova»"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "In¹talujem"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Odhadujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Zvy¹ný èas "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Prosím èakajte, pripravujem in¹taláciu"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d balíky"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "In¹talujem balík %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akceptuj"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odmietni"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Zmeòte vá¹ CD-ROM disk!\n"
-"\n"
-"Prosím, vlo¾te CD-ROM nazvané \"%s\" do va¹ej mechaniky a zvoµte OK.\n"
-"Ak taký CD disk nemáte, zvoµte Zru¹ pre zru¹enie in¹talácie z tohoto disku."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Napriek tomu pokraèova»?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Chyba pri zoraïovaní zoznamu balíkov:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Poèas in¹talácie balíkov sa vyskytla chyba:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Vyskytla sa chyba"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Naozaj chcete ukonèi» in¹taláciu?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Súhlas s licenciou"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klávesnica"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Prosím, zvoµte typ va¹ej klávesnice."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Tu je zoznam dostupných klávesnic"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Akú in¹talaènú triedu chcete pou¾i»?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "In¹talácia/Aktualizácia"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Toto je in¹talácia alebo aktualizácia?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Odporúèane"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aktualizácia"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Jedine aktualizácia balíèkov"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Prosím, zvoµte typ va¹ej my¹i."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port my¹i"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Prosím zvoµte, ktorému sériovému portu je va¹a my¹ pripojená."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulácia tlaèidiel"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulácia druhého tlaèidla"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulácia tretieho tlaèidla"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurujem PCMCIA karty..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurujem IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nie sú dostupné ¾iadne oddiely"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Prehµadávam oddiely na body pripojenia"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Zvoµte body pripojenia"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nemô¾em preèíta» tabuµku rozdelenia disku, je príli¹ po¹kodená :(\n"
-"Mô¾em sa pokúsi» vyèisti» po¹kodené oddiely (V©ETKY ÚDAJE budu stratené!).\n"
-"Druhou mo¾nos»ou je zakáza» DrakXu modifikova» tabuµku rozdelenia.\n"
-"(chyba %s)\n"
-"\n"
-"Povolite strátu oddielu?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nedokázal korektne naèíta» tabuµku rozdelenia disku.\n"
-"Pokraèujte na vlastné riziko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nieje dostatok miesta pre 1MB veµký bootstrap! In¹talácia mô¾e pokraèova», "
-"ale pre spustenie systému musíte vytvori» oddiel pomocou DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nena¹iel som koreòový oddiel pre upgrade"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Koreòový oddiel"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Ktorý je koreòový oddiel va¹ej in¹talácie?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Aby sa prejavily úpravy partition tabuµky, musíte re¹tartova»"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Výber oddielov pre formátovanie"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Kontrola chybných blokov?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formátuje sa"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytváram a formátujem súbor %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nedostatoène veµký swap pre dokonèenie in¹talácie, prosím zväè¹i»"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Hµadám dostupné balíky"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Hµadám balíky pre aktualizáciu"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Vá¹ systém nemá dos» miesta pre in¹taláciu alebo upgrade (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Úplna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Odporuèené (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Prosím zvoµte naèíta», alebo ulo¾i» výber balíèkov na disketu.\n"
-"Formát je taký istý ako diskety generované automatickou\n"
-"in¹taláciou."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Nahra» z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Nahrávam z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Výber balíèkov"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Vlo¾te do mechaniky disketu s zoznamom balíèkov"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Ulo¾ na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Zvolená veµkos» je väè¹ia ako dostupné miesto"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Typ in¹talácie"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nebola vybratá ¾iadna skupina balíèkov\n"
-"Prosím, zvoµte minimálnu in¹taláciu, ktorú si ¾eláte"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "S X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "So základnou dokumentáciou (doporuèené!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Naozaj minimálna in¹talácia (bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ak máte v¹etky CD zo zoznamu, stlaète OK.\n"
-"Ak nemáte ¾iadne, stlaète Zru¹.\n"
-"Ak vám chýbajú iba niektoré, odznaète ich a potom stlaète OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom oznaèené \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripravujem in¹taláciu"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"In¹talujem balík %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Poin¹talaèná konfigurácia"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Vlo¾te ¹tartovaciu disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Vlo¾te Update Modules disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Teraz máte mo¾nos» získa» balíky urèené na kryptovanie.\n"
-"\n"
-"Varovanie:\n"
-"\n"
-"Vïaka rozdielnemu prístupu zákona (v rôznych krajinách) k týmto balíkom,\n"
-"by ste sa mali dopredu uisti», èi vám pou¾ívanie takýchto balíkov zákon\n"
-"vo va¹ej krajine dovoµuje.\n"
-"\n"
-"V prípade, ¾e poru¹íte zákony va¹ej krajiny, mali by ste si by» vedomý,\n"
-"aký trest vám za to hrozí.\n"
-"\n"
-"Mandrakesoft (ani jeho zamestnanci, èi spolupracovníci) neruèí za akékoµvek\n"
-"¹kody spôsobené pou¾ívaním jeho softvéru.\n"
-"\n"
-"\n"
-"Ak máte ïal¹ie otázky súvisiace s týmto textom, obrá»te sa prosím na \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Teraz máte mo¾nos» stiahnu» aktualizované verzie balíèkov, ktoré\n"
-"boli vydané a¾ po uvoµnení distribúcie.\n"
-"\n"
-"Získate tým bezpeènostné opravy a opravy chýb. Potrebujete\n"
-"v¹ak nastavené pripojenie k internetu.\n"
-"\n"
-"®eláte si nain¹talova» aktualizácie balíèkov ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Pripájam sa k www stránke Mandrake Linuxu pre stiahnutie zoznamu  zrkadiel"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Vyberte miror, z ktorého chcete stiahnu» balík"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Pripájam sa k miroru a s»ahujem zoznam mo¾ných balíkov"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Ktoré je va¹e èasové pásmo?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardvérove hodiny nastavené na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatická synchronizácia èasu (pomocou NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Vzdialený CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Bez tlaèiarne"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Máte e¹te nejaké ïal¹ie?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Zhrnutie"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "My¹"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Èasová zóna"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Tlaèiarne"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN karta"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvuková karta"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV karta"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokálne súbory"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Nastavenie root hesla"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez hesla"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Toto heslo je príli¹ jednoduché(musí by» minimálne %d znakov dlhé)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikácia"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentifikácia LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS autentifikácia"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS doména"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Vlastná zavádzacia disketa poskytuje mo¾nos» zavies» vá¹ systém Linux\n"
-"bez závislosti na obvyklom zavádzaèi. Hodí sa to, pokiaµ nechcete na va¹om\n"
-"systéme in¹talova» SILO, iný operaèný systém SILO odstráni, alebo\n"
-"SILO nepracuje správne s va¹ím hardvérom. Individuálna zavádzacia disketa\n"
-"mô¾e by» tie¾ pou¾itá spolu s Mandrake Linux záchrannou disketou, èo \n"
-"podstatne uµahèí zotavenie sa z vá¾nych chýb systému.\n"
-"\n"
-"Ak si ¾eláte vytvori» zavádzaciu disketu pre vá¹ systém, vlo¾te disketu do\n"
-"prvej mechaniky a stlaète \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prvá floppy mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Druhá floppy mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Vynechaj"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Individuálna zavádzacia disketa poskytuje mo¾nos» zavies» vá¹ systém Linux\n"
-"bez závislosti na obvyklom zavádzaèi. Hodí sa to, pokiaµ nechcete na va¹om\n"
-"systéme in¹talova» LILO (èi GRUB), iný operaèný systém LILO odstráni, alebo\n"
-"LILO nepracuje správne s va¹ím hardvérom. Individuálna zavádzacia disketa\n"
-"mô¾e by» tie¾ pou¾itá spolu s Mandrake Linux záchrannou disketou, èo \n"
-"podstatne uµahèí zotavenie sa z vá¾nych chýb systému.\n"
-"\n"
-"®eláte si vytvori» zavádzaciu disketu pre vá¹ systém?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Prepáète, nena¹iel som ¾iadnu disketovú mechaniku"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvoµte floppy mechaniku v ktorej chcete vytvori» boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Vlo¾te disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Vytváram bootdisk"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripravuje sa zavádzaè"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Chcete pou¾i» aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Chyba in¹talácie aboot.\n"
-"Skúsi» silovú in¹taláciu s mo¾nos»ou znièenia prvého oddielu?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "In¹talujem zavádzaè"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "In¹talácia zavádzaèa zlýhala. Vyskytla sa nasledujúca chyba:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vlo¾te èistú disketu do mechaniky %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Pripravujem auto in¹talaènú disketu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Niektoré kroky niesu dokonèené.\n"
-"\n"
-"Naozaj chcete teraz skonèi»?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme! In¹talácia je kompletná.\n"
-"Vyberte zavádzacie médium (disketa, CD) a staète enter\n"
-"pre re¹tart poèítaèa.\n"
-"\n"
-"\n"
-"Informácie o opravách tejto verzie Mandrake Linux-u mô¾ete nájst na\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-" "
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Príprava auto in¹talaènej diskety"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatická in¹talácia mô¾e by» plne automatizovaná\n"
-"v tom prípade v¹ak in¹talácia zaberie celý pevný disk.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatická"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Prehra»"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Ulo¾i» voµbu balíkov"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "In¹talácia Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> medzi polo¾kami  |  <Medzera> oznaèuje  |  <F12> ïalej"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "chýba kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Zvoµte súbor"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Roz¹írene"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Základná"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Prosím èakajte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Uká¾ strom"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Skri strom"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Priame, alebo skupinové triedenie"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Chybná voµba, skúste znovu\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va¹a voµba? (predvolené %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Záznamy, ktoré musíte vyplni»:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va¹a voµba? (0/1, predvolené `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Tlaèítko `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "®eláte si kliknú» na toto tlaèítko?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va¹a voµba? (predvolené `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Èeská (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Nemecká"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "©panielska"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fínska"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francúzska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Nórska"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polská"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruská"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "©védska"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK klávesnica"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US klávesnica"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albánska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arménska (stará)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arménska (písací stroj)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arménska (fonetická)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbajd¾an (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgická"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulharská (fonetická)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulharská (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazílska"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bieloruská"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "©vajèiarska (Nemecké rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "©vajèiarska (Francúzske rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Èeská (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Nemecká (bez màtvych kláves)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dánska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Nórska)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedish)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estónska"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzínska (\"Ruské\" rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzínska (\"Latin\" rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grécka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Maïarská"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Chorvátska"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelská"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelská (fonetická)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iránska"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandská"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Talianska"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonská 106 kláves"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Kórejska klávesnica"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinsko Americká"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litovská AZERTY (stará)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litovská AZERTY (nová)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litovská QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litovská \"fonetická\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedónska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandský"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poµská (qwerty rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poµská (qwertz rozlo¾enie kláves)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalská"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadská (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Románska (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Románska (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruská (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovinská"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovenská (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovenská (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srbská (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilská"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thaiská klávesnica"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik klávesnica"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turecká (tradièný \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turecká (moderný \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainská"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US klávesnica (medzinárodná)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamská \"numerická\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Juhoslovanská (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "Prevzia» fonty z Windows"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kruhové pripojenia %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Odstraòte najprv logické zväzky\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podpora u¾ nieje zahrnutá v jadrách verzie 2.2. Pou¾ite verziu 2.4"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun my¹"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "©tandardná PS2 my¹ s kolieskom"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 tlaèidlo"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "¹tandardná my¹ s 2 tlaèidlami"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "V¹eobecné"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Koliesko"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "sériová"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "©tandardná trojtlaèítková"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sériová, starý typ C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "My¹ na zbernici"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tlaèidlá"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tlaèidlá"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "niè"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "®iadna my¹"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Prosím otestujte my¹."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Pre aktiváciu my¹i,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "POHNITE KOLIESKOM!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Dokonèi»"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Ïal¹í ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Predchádzajúce"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Je to správne?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Pripojenie k internetu"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najpou¾ivanej¹ie pripojenie s adsl je pppoe.\n"
-"Av¹ak existujú pripojenia ktoré pou¾ívaju pptp alebo dhcp.\n"
-"Ak neviete èo pou¾i», tak zvoµte 'pou¾i pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "pou¾i» dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pou¾i pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pou¾i pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Ktorý dhcp klient chcete pou¾i»?\n"
-"©tandardný je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Vo va¹om systéme nebol nájdený sie»ovy ethernet adaptér.\n"
-"Nemô¾em nastavi» po¾adovaný typ pripojenia."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Zvoµte sie»ove rozhranie"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Prosím zvoµte si ktoré sie»ové zariadenie budete pou¾íva» na pripojenie k "
-"internetu"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nena¹iel som sie»ovú kartu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurujem sie»"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Prosím zadajte meno vá¹ho poèítaèa ak ho viete.\n"
-"Niektoré DHCP servre ho vy¾adujú pre svoju funkènos».\n"
-"Meno vá¹ho poèítaèa by malo byt plne kvalifikované host name,\n"
-"ako napríklad ``hq.alert.sk''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Názov poèítaèa"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Sprievodca konfiguráciou siete"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externý ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interná ISDN karta"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Aký typ ISDN pripojenia máte?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Ktorý typ nastavenia ISDN uprednotníte?\n"
-"\n"
-"* Starý typ pou¾íva isdn4net. Obsahuje silné nástroje, ale\n"
-"  »a¾ko sa nastavuje.\n"
-"\n"
-"* Nový typ je jednoduch¹ie pochopiteµný, ale obsahuje menej\n"
-"  nástrojov.\n"
-"\n"
-"Doporuèujeme pou¾i» nový typ nastavenia ISDN.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nová konfigurácia (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stará konfigurácia (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Konfigurácia ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Zvoµte si poskytovateµa.\n"
-"Ak nieje v zozname, zvoµte Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Európsky protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Európsky protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol pre zvy¹ok sveta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol pre zvy¹ok sveta \n"
-" bez D-Channel (prenajaté linky)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Aký typ protokolu chcete pou¾íva» ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Aký typ karty máte?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Neviem"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ak máte ISA kartu, tak hodnoty na ïal¹ej obrazovke by mali by» správne.\n"
-"\n"
-"Ak máte PCMCIA kartu, musíte vedie» irq a io adresu tejto karty.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Preru¹"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Pokraèova»"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Ktorá je va¹a ISDN karta ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Na¹iel som PCI ISDN kartu, ale nepoznám tento typ. Prosím zvoµte si jednu z "
-"PCI kariet na ïal¹ej obrazovke."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Nebola nájdena ISDN karta. Prosím zvoµte si jednu zo zobrazených."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Prosím zvoµte na ktorý sériový port je pripojený vá¹ modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Voµby dialupu"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Meno pripojenia"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefónne èíslo"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Prihlasovacie ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Zalo¾ené na skriptoch"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Zalo¾ené na terminály"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Meno domény"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvý DNS server (nepovinné)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Druhý DNS server (nepovinné)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mô¾ete va¹e pripojenie prekonfigurova» alebo sa odpoji»."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Mô¾ete prekonfigurova» va¹e pripojenie."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Momentálne ste pripojený k internetu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Mô¾ete prekonfigurova» va¹e pripojenie, alebo sa pripojit k internetu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Momentálne nieste pripojený k internetu."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Pripojenie"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Odpojenie"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Nastavi» pripojenie"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Pripojenie a konfigurácia internetu"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Teraz nastavíme Va¹e pripojenie %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Teraz nastavíme pripojenie %s.\n"
-"\n"
-"Stlaète OK pre pokraèovanie."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigurácia siete"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Preto¾e robíte in¹taláciu cez sie», va¹a sie» je u¾ nasavená. Stlaète OK pre "
-"zachovanie\n"
-"nastavenia, alebo Cancel pre opätovné nastavenie pripojenia na internet a "
-"sie».\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Vítajte v sprievodcovi nastavenia siete\n"
-"\n"
-"Chcete nastavi» va¹e pripojenie k sieti/internetu.\n"
-"Ak nechcete pou¾i» automatickú detekciu od¹krtnite políèko.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Zvoµte profil na konfiguráciu"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Pou¾i» auto-detekciu"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Zis»ujem zariadenia..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normálne modémove pripojenie"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detekovaný na porte %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN pripojenie"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "nájdene %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL pripojenie"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detekovaný na rozhraní %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Pripojenie káblom"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detekované pripojenie káblom"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Pripojenie LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "nájdená ethernet karta(y)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Vyberte pripojenie, ktoré chcete nastavi»"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Nastavili ste niekoµko mo¾ností pripojenia k internetu.\n"
-"Zvoµte jednu, ktorú chcete pou¾íva».\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Pripojenie k internetu"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete sa pripoji» hneï pri ¹tarte?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Konfigurácia siete"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Sie» potrebuje re¹tart."
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Nastal problém pri re¹tartovaní sie»e: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulujeme. Nastavenie siete a pripojenia k internetu je dokonèené\n"
-"Nastavenie bude teraz aplikované na vá¹ systém.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Po zmene doporuèujeme re¹tartovat X windows, aby ste\n"
-"predi¹li problémom pri zmene mena hostu."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Poèas konfigurácie sa vyskytli problémy.\n"
-"Vyskú¹ajte Va¹e pripojenie s nástrojom net_monitor, alebo mcc. Ak pripojenie "
-"nepracuje, mali by ste opätovne spusti» konfiguráciu"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Varovanie: Toto zariadenie u¾ bolo  nastavené na prístup k internetu.\n"
-"Jednoducho nechajte pôvodné nastavenie.\n"
-"Modifikácia parametrov mô¾e zmeni» nastavenie."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Zadajte IP konfiguráciu tohoto poèítaèa.\n"
-"Ka¾dý záznam by mal by» zadaný ako IP adresa v dekadickom tvare\n"
-"oddelenom bodkami (napr. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurácia sie»ového zariadenia %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (ovladaè %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maska siete"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatická IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa musí by» vo formáte 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Prosím zadajte meno vá¹ho poèítaèa.\n"
-"Meno vá¹ho poèítaèa by malo byt plne kvalifikované host name,\n"
-"ako napríklad ``hq.alert.sk''.\n"
-"Tie¾ mô¾ete zada» IP adresu brány ak ju viete"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (napr. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Zariadenie smerujúce k bráne"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Nastavenie proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy má by» http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy má by» ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Konfigurácia internetu"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete sa skúsi» pripoji» teraz k internetu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testovanie pripojenia..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Systém je teraz pripojený k internetu."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Z bezpeènostných dôvodov bude teraz odpojený."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Systém prevdepodobne nieje pripojený k internetu.\n"
-"Skúste prekonfigurova» pripojenie."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurácia pripojenia"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Prosím vyplòte alebo za¹krtnite políèka"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Va¹e osobné telefónne èíslo"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Meno poskytovateµa (napr. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefónne èíslo poskytovateµa"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 poskytovateµa (voliteµné)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 poskytovateµa (voliteµné)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Vyberte si va¹u krajinu"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Mód vytáèania"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Rýchlos» pripojenia"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout pripojenia (v sekundách)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Meno úètu (u¾ivateµské meno)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Heslo úètu"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "nepodarilo sa pripoji»: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Na tejto platforme njeje podporovaný roz¹írený oddiel"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"V tabuµke rozdelenia disku sa nachádza záznam o voµnom priestore,\n"
-"ktorý nedoká¾em vyu¾i». Jediné rie¹enie je presunú» primárny oddiel tak,\n"
-"aby sa voµné miesto nachádzalo za ním a bolo pou¾iteµné pre roz¹írený\n"
-"oddiel."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnovenie zo súboru %s zlyhalo: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Chybný zálohovací súbor"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "chyba pri zápise do súboru %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Na va¹om disku sa deje nieèo nedobré.\n"
-"Zlyhal test integrity dát. Akýkoµvek zápis dát mo¾e skonèi»\n"
-"neúspechom a stratou dát."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "musí ma»"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "dôle¾ité"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "veµmi pekné"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "pekné"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo¾no"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tlaè, neukladaj do fronty."
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "USB"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokálna tlaèiareò"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Vzdialená tlaèiareò"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Tlaèiareò na vzdialenom CUPS serveri"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Tlaèiareò na vzdialenom lpd serveri"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Sie»ová tlaèiareò (TCP/Soket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tlaèiareò na vzdialenom SMB/Windows 95/98/NT serveri"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Tlaèiareò na vzdialenom NetWare serveri"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Vlo¾te URI zariadenia tlaèiarne"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Presmeruj výstup do príkazu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Neznámy model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokálne tlaèiarne"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Vzdialené tlaèiarne"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na paralelnom porte \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB tlaèiareò \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multifunkèné zariadenie na paralelnom porte \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multifunkèné zariadenie na USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunkèné zariadenie HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multifunkèné zariadenie "
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", tlaè na %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveri \"%s\", tlaèiareò \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na Windows serveri \"%s\", zlo¾ka \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell serveri \"%s\", tlaèiareò \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", pou¾itím príkazu %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Základná tlaèiareò (bez ovládaèa)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(nal %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na tomto stroji)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS server \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Predvoµba)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Zvoµte pripojenie tlaèiarne"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Ako je tlaèiareò pripojená?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Tlaèiarne na vzdialenom CUPS serveri nemusíte konfigurova» lokálne; "
-"tlaèiarne budú rozpoznané automaticky."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfigurácia"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Vzdialený CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa vyzerá napríklad takto: 192.168.1.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Èislo portu má by» celé kladné èíslo!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP CUPS servera"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatické nastavenie CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Zis»ujem zariadenia..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test portov"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Pridaj novú tlaèiareò"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokálna tlaèiareò"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatická detekcia tlaèiarní"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatická detekcia tlaèiarní"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Pou¾i» auto-detekciu"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Vybra» u¾ívateµov manuálne"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Nájdené %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Tlaèiareò na paralelnom porte \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB tlaèiareò \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Musíte vlo¾i» zariadenie alebo meno súboru!"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Nebola nájdená lokálna tlaèiareò!"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Prosím, zvoµte, na ktorý port je pripojená vá¹a tlaèiareò."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Musíte vlo¾i» zariadenie tlaèiarne"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ruèné nastavenie"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "In¹talujem balíèek HPOJ ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Kontrolujem zariadenia a konfigurujem HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "In¹talujem balíèek SANE ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Vyhµadávam na multi-funkènom HP zariadení"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Nastavujem rozhranie tlaèiarne pre prístup z CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Naèítavam databázu tlaèiarní ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Voµby vzdialenej lpd tlaèiarne"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Pre pou¾itie vzdialenej lpd tlaèiarne je potrebné zada» názov tlaèového "
-"servera a názov tlaèiarne na tomto serveri."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Názov vzdialeného poèítaèa"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Meno vzdialenej tlaèiarne"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Chýba názov vzdialeného poèítaèa"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Chýba názov vzdialenej tlaèiarne!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Voµby tlaèiarne SMB/Windows 9x/NT"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Pre tlaè na SMB tlaèiareò je potrebné zada» názov SMB servera (nebýva v¾dy\n"
-"zhodný s TCP/IP názvom poèítaèa) a prípadne IP adresu tlaèového servera, "
-"ako\n"
-"aj názov zdieµaného zariadenia pre tlaèiareò a vhodné meno pou¾ívateµa,\n"
-"heslo a pracovnú skupinu."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Názov SMB servra"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP adresa SMB servra"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Názov zdieµaného zariadenia"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Pracovná skupina"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Musíte zada» meno, alebo IP adresu servera!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Chýba meno samba zlo¾ky!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Voµby tlaèiarne pre NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Pre tlaè na NetWare tlaèiareò je potrebné zada» názov NetWare tlaèového\n"
-"servera (nebýva v¾dy zhodný s TCP/IP názvom poèítaèa), ako aj názov fronty\n"
-"tlaèiarne, ku ktorej chcete pristupova» a vhodné meno pou¾ívateµa s heslom."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Tlaèový server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Názov tlaèovej fronty"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Chýba meno NCP servera!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Chýba meno NCP fronty!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Soket nastavenia tlaèiarne"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Pre tlaè na TCP, alebo socket tlaèiareò musíte zada» meno hostiteµa "
-"tlaèiarne a prípadne èíslo portu. Na HP JetDirect serveroch je èíslo portu "
-"väè¹inou 9100, na iných serveroch to mô¾e by» odli¹né. Pozrite si manuál."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Hostiteµské meno tlaèiarne"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Chýba hostiteµské meno tlaèiarne"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI tlaèiarne"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Pre prístup k tlaèiarni zadajte jej URI. URI musí spåòa» CUPS alebo Foomatic "
-"¹pecifikácie."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Musíte zada» správne URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Ka¾dá tlaèiareò potrebuje meno (napríklad \"print\"). Polo¾ky Popis a Poloha "
-"nie je potrebné vyplòova». Sú to iba komentáre pre u¾ívateµov."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Meno tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Popis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Umiestnenie"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripravujem databázu tlaèiarní ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Meno vzdialenej tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Je to správne?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Vybra» u¾ívateµov manuálne"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Výber modelu tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Aký model tlaèiarne máte?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Nastavenie OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavenie Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Základné nastavenia tlaèiarne\n"
-"\n"
-"Uistite sa, ¾e veµkos» papiera, typ atramentu, tlaèový mód (ak existuje) a "
-"tie¾ hardvérové nastavenie laserových tlaèiarní (pamä», duplex, ...) sú "
-"nastavené správne. Príli¹ vysoká kvalita, èi rozlí¹enie tlaèe spôsobuje "
-"spomalenie."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Parameter %s musí by» celé èíslo!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Parameter %s musí by» èíslo!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Parameter %s je mimo rozsahu!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"®eláte si nastavi» túto tlaèiateò (\"%s\")\n"
-"ako predvolenú?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testovacie stránky"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Prosím zvoµte testovacie stránky, ktoré chcete vytlaèi»\n"
-"Tlaè testovacej stánky foto kvality mô¾e trva» tro¹ku dlh¹ie a na laserovej "
-"tlaèiarni s nedostatkom pamäte sa nemusí vytlaèi» vôbec. Vo veè¹ine "
-"prípadoch postaèuje vyskú¹a» ¹tandartnú testovaciu stránku."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "®iadne testovacie stránky"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Tlaè"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "©tandardné testovacie stránky"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternatívna testovacia stránka (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternatívna testovacia stránka (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fotografická testovacia stránka"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Bez tlaèe testovacích stránok"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Prebieha tlaè testovacej stránky..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testovacia stránka bola zaslaná tlaèiarni.\n"
-"Kým zaène tlaèiareò tlaèi», mô¾e to chvíµku trva».\n"
-"Stav tlaèe:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testovacia stránka bola zaslaná tlaèiarni.\n"
-"Kým zaène tlaèiareò tlaèi», mô¾e to chvíµku trva».\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Pracuje správne?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Základná tlaèiareò"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori»"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tlaè/Skenovanie na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tlaèím na tlaèiareò \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Zobraz zoznam parametrov"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Naèítavam dáta tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Prenes nastavenie tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tlaèiarne na Novell serveroch, alebo tlaèiarne, ktoré "
-"posielajú dáta vo free-formed command.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podporuje iba lokálne tlaèiarne, vzdialené LPD a Socket/TCP tlaèiarne.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD a LPRng nepodporujú IPP tlaèiarne.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Oznaète tlaèiareò ktorú si ¾eláte prenies» a stlaète \n"
-"\"Prenos\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Neprená¹aj tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Prenos"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tlaèiareò s menom \"%s\" u¾ pod %s existuje.\n"
-"Stlaète \"Prenos\" na prepísanie.\n"
-"Mô¾ete tie¾ napísa» nové meno alebo preskoèi»\n"
-"túto tlaèiareò."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Meno tlaèiarne mô¾e obsahova» iba písmená, èísla a podèiarkovník"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tlaèiareò \"%s\" u¾ existuje.\n"
-"®eláte si prepísa» nastavenie ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nové meno tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Prená¹am %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Obnova dát tlaèiarne ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Nastavenie vzdialenej tlaèiarne"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Spú¹»am sie»..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Teraz nastavi» pripojenie siete"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Sie»ové pripojenie nieje nastavené"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Pokraèuj bez nastavenia siete."
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Re¹tartujem tlaèový systém ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "vysoká"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidná"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Spú¹»a» tlaèový systém pri spustení systému"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Kontrolujem in¹talovaný softvér..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Odstraòujem PLRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Odstraòujem LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Zvoµte tlaèovú frontu"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Aký typ tlaèového systému chcete pou¾íva»?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurujem tlaèiareò \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "In¹talujem balíèky"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Voµby tlaèiarne"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pripravujem PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfigurujem tlaèiareò \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "®eláte si nastavi» tlaèiareò?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Tlaèový systém:"
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Momentálne sú nastavené tieto tlaèiarne. Spravte dvojklik na meno tlaèiarne "
-"ak si ¾eláte zmenit jej nastavenia, alebo prezrie» informácie."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Momentálne sú nastavené tieto tlaèiarne. Spravte dvojklik na meno tlaèiarne "
-"ak si ¾eláte zmenit jej nastavenia, alebo prezrie» informácie."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Nastavenie tlaèového systému"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normálny mód"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "®eláte si nastavi» inú tlaèiareò ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Zmena nastavenia tlaèiarne"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tlaèiareò %s\n"
-"èo si ¾eláte zmeni» na tejto tlaèiarni?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Urob to!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Typ pripojenia tlaèiarne"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Meno, popis a poloha tlaèiarne"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Výrobca tlaèiarne, model, ovládaè"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Výrobca tlaèiarne, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Nastavi» tlaèiaren ako predvolenú"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tlaè testovacích stránok"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Viem, ako pou¾íva» túto tlaèiareò"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Odstráni» tlaèiareò"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Odstraòujem starú tlaèiareò \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Predvolená tlaèiareò"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tlaèiareò \"%s\" je teraz nastavená ako predvolená."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Naozaj chcete odstráni» tlaèiateò \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Odstraòujem tlaèiareò \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Nastavenie proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Vitajte v nástroji na nastavenie proxy servera.\n"
-"\n"
-"Teraz budete môc» nastavit pou¾ívanie FTP a\n"
-"HTTP proxy serverov a prístupové heslá.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Prosím vyplò»e informácie pre HTTP proxy\n"
-"Nechajte prázdne ak nechcete HTTP proxy\n"
-"pou¾íva». "
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL ma zaèína» 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port má by» v èíselnom tvare"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Prosím vyplò»e informácie pre FTP proxy\n"
-"Nechajte prázdne ak nechcete FTP proxy\n"
-"pou¾íva». "
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL ma zaèína» 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Prosím vlo¾te prihlasovacie meno a heslo pre proxy.\n"
-"Nechajte prázdne ak heslo nepotrebujete. "
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "heslo"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "heslo e¹te raz"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Hesla nesúhlasia. Skúste znova!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nemô¾em prida» oddiel do _naformátovaného_ RAID poµa md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nemô¾em zapísa» súbor %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid zlyhal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid zlyhal (mo¾no nie sú nain¹talované raidtools)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie je dos» oddielov pre RAID úrovne %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustenie ALSA (Advanced Linux Sound Architecture) zvukového systému"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, periodický plánovaè príkazov."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd sa pou¾íva pre monitorovanie (a zápis pomocou syslogu) stavu batérií.\n"
-"Mô¾ete ho tie¾ pou¾i» na vypnutie poèítaèa keï sa baterky takmer minú."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr "Spú¹»a príkazy nastavené cez príkaz at v stanovenom èase."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je ¹tandardný UNIXový program, ktorý spú¹»a príkazy naplánované\n"
-"u¾ívateµom. vixie cron pridáva viac mo¾ností konfigurácie."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM pridá podporu my¹i textovo orientovaným aplikáciám ako napríklad\n"
-"Midnight Commander. Takisto umo¾ní v textových konzolách kopírovanie\n"
-"pomocou my¹i a podporu pop-up menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake vyhµadáva nový harvér a nastavuje parametre\n"
-"nového alebo zmeneného hardvéru."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache je WWW server. Je pou¾ívaný na poskytovanie HTML stránok a CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver démon (väè¹inou nazývaný inetd) poskytuje mnoho\n"
-"slu¾ieb súvisiacich s internetom. Je zodpovedný za spú¹»anie slu¾ieb\n"
-"ako telnet, ftp, rsh, rlogin a iné. Vypnutím inetd vypnete v¹etky\n"
-"slu¾by, za ktoré je zodpovedný."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustí filtrovanie paketov pre Linux kernel verzie 2.2 na \n"
-"ochranu vá¹ho poèítaèa pred útokmi zo siete."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento balík nahrá do pamäti vybranú klávesnicovú mapu z nastavenia v\n"
-"/etc/sysconfig/keyboard. Nastavenie sa dá meni» napríklad pomocou\n"
-"konfiguraèného nástroja kbdconfig."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatická obnova hlavièiek jadra v /boot\n"
-"pre /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatická detekcia a konfigurácia hardvéru pri ¹tarte."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf niekedy nastaví vykonanie rôznych úloh poèas\n"
-"zavádzania systému pre udr¾anie konfigurácie."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tlaèový démon, ktorý je po¾adovaný pre správnu prácu nástroja lpr."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr "Linux Virtual Server sa pou¾íva na vysoko výkonné a HA rie¹enia."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je doménový menný server (DNS) pou¾ívaný na preklad z mena "
-"poèítaèa na IP adresu."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Pripája a odpája v¹etky NFS, SMB (Windows) a NCP (NetWare)\n"
-"body pripojenia."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje/Deaktivuje v¹etky sie»ové zariadenia konfigurované pre spustenie\n"
-"po zavedení systému."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je známy protokol, urèený na zdielanie súborov cez TCP/IP siete.\n"
-"Táto slu¾ba dovolí NFS servru exportova» adresáre predvolené v súbore\n"
-"/etc/exports"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je známy protokol, urèený na zdielanie súborov cez TCP/IP siete.\n"
-"Táto slu¾ba pridá NFS servru funkciu lockovania súborov."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky zapne num-lock pod konzolou a XFree pocas\n"
-"¹tartu systému."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pre OKI 4w a kompatibilné win tlaèiarne."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Podpora PCMCIA je väè¹inou pou¾ívaná na sprístupnenie sie»ovej karty,\n"
-"alebo modemu v notebookoch."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmaper spravuje RPC pripojenia, ktoré sú pou¾ívané protokolmi ako\n"
-"NFS a NIS. Portmap server musí by» spustený na poèítaèoch, ktoré sú \n"
-"servrami pre protokoly pou¾ívajúce RPC mechanizmus."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, èi¾e program, ktorý prená¹a e-maily z "
-"poèítaèa na poèítaè."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Ukladá a obnovuje system entropy pool pre vy¹¹iu kvalitu generátora\n"
-"náhodných èísel."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Priradí základné zariadenie k blokovému (ako napríklad oddiely\n"
-"pevného disku) pre pou¾itie v aplikáciách ako Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed démon umo¾òuje automatickú úpravu smerovacích IP tabuliek\n"
-"cez RIP protokol. RIP je èastej¹ie pou¾ívaný na malých sietiach. Pre\n"
-"komplexnej¹ie siete je potrebný komplexný smerovací protokol."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol umo¾òuje u¾ívateµom získava» cez sie»\n"
-"informácie o za»a¾ení akéhokoµvek poèítaèa na sieti."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol umo¾òuje zisti» u¾ívateµom cez sie», kto je\n"
-"prihlásený na odpovedajúcich poèítaèoch."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho protokol za¹le vzdialeným u¾ívateµom zoznam v¹etkých u¾ívateµov\n"
-"prihlásený na systéme, na ktorom je spustený rwho démon (podobne ako finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Spusti» zvukový systém na Va¹om poèítaèi"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je mo¾nos», ktorú vyu¾íva mnoho démonov na ukladanie správ\n"
-"do rôznych systémových log súborov. Je dobré, keï je syslog v¾dy spustený."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Nahratie ovládaèov pre va¹e usb zariadenia."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Spú¹»a X Font Server (je potrebný pre spustenie XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvoµte si slu¾by, ktoré budú spustené automaticky po ¹tarte systému"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Tlaèím"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Zdielanie súborov"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Systém"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Vzdialená správa"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databázový server"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Slu¾by: %d aktivované  %d registrované"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Slu¾by"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "be¾í"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stopnuté"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Slu¾by a démoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"®iadne roz¹irujúce informácie\n"
-"o tejto slu¾be, prepáète."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri ¹tarte"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "©tart"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol pre zvy¹ok sveta"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Prístup k internetu"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimédia - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Vývojárska"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kontrolné centrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Sie»ove rozhranie"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Názov SMB servra"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Hry"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-#, fuzzy
-msgid "MandrakeConsulting"
-msgstr "Popis Mandrake Nástrojov"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "In¹talujem balíèky"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nedoká¾em preèíta» tabuµku rozdelenia disku, je príli¹ po¹kodená\n"
-"Skúsim odstráni» chybné oddiely"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Chyba!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nemô¾em nájst potrebný image file `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Teraz mô¾ete nastavi» Autoin¹talaènú disketu. Táto mo¾nos» je èiastoène "
-"nebezpeèná a preto ju pou¾ívajte opatrne\n"
-"\n"
-"Budete môc» zopakova» in¹taláciu, ktorú ste spravili na tento poèítaè, s "
-"nekoµkými interaktívnymi krokmi (aby ste mohli zmeni» ich hodnoty)\n"
-"\n"
-"Pre maximálnu bezpeènos», rozdelenie disku a formátovanie sa nikdy nebude "
-"robi» automaticky.\n"
-"\n"
-"®eláte si pokraèova»?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automatické kroky konfigurácie"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Prosím pre ka¾dý krok zvoµte èi sa má zopakova» ako pri va¹ej in¹talácii "
-"alebo znovu nastavi»"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Vitajte.\n"
-"\n"
-"Parametre automatickej in¹talácie sú dosiahnuteµné na li¹te vµavo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulujeme!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa bola úspe¹ne vytvorená.\n"
-"Teraz mô¾ete zopakova» in¹taláciu."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automatická in¹talácia"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Pridaj polo¾ku"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Odstráò poslednú polo¾ku"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup report \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Démon report\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup detaily reportu\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "celkový postup"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Záloha systémových súborov..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Záloha na pevný disk. Súbory..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Zálohova» u¾ívateµské súbory..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Stav zálohy na pevný disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Zálohova» iné súbory..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"Zoznam súborov odoslaných cez FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Chzba FTP pripojenia: Nebolo mo¾né odosla» zálohovacie súbory cez FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Chzba poèas odosielania e-mailu. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Výber súborov"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Zvoµte súbory a adresáre a kliknite na 'Pridaj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Zvoµte prosím v¹etky volby, ktoré potrebujete.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Tieto nastavenia mô¾u zálohova» a obnovova» v¹etky súbory v adresári /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Záloha systémových súborov. (adresár /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Pou¾i prírastkové zálohovanie (bez prepisovania starých záloh)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Nezahrnova» kritické súbory (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"S týmto nastavením budete schopný obnovi» ktorúkoµvek\n"
-" verziu vá¹ho /etc adresára."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Prosím, zadajte v¹etkých u¾ívateµov, ktorých chcete zálohova»."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Nezahrnova» vyrovnávaciu pamä» prehliadaèa"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Pou¾i prírastkové zálohovanie (bez prepisovania starých záloh)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Odstráò zvolené"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr " Windows (FAT32) "
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr " U¾ívatelia"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Pre zálohovanie pou¾i» FTP"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Prosím vlo¾te meno hostu alebo IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Prosím zadajte adresár, kam sa\n"
-" budú uklada» zálohy na tomto hoste."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Prosím vlo¾te vá¹ login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Prosím vlo¾te va¹e heslo"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Zapamätajte si toto heslo"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr " FTP spojenie"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Bezpeèné pripojenie"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Pre zálohovanie pou¾i» CD/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Prosím, zvoµte veµkos» CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Prosím skontrolujte, èi pou¾ívate CDRW médium"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Prosím za¹krtnite, aks i ¾eláte CDRW médium najskôr vymaza»"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Ak si ¾eláte spustiteµné CD,\n"
-" vyberte túto voµbu."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Prosím, zadajte meno zariadenia CD Zapisovaèky\n"
-" napr. 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Pre zálohovanie pou¾i» pásku"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Prosím, zadajte meno zálohovacieho zariadenia"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Prosím, zadajte maximálnu veµkos»\n"
-" pre Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Prosím, zadajte adresár:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Pre zálohovanie pou¾i» quotu."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Sie»"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM "
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Pevný disk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ka¾dú hodinu"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "denne"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "tý¾denne"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "mesaène"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Pou¾i démnona"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Prosím, zvoµte èasový interval\n"
-"medzi jednotlivými zálohami"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Prosím, zálohovacie \n"
-"médium."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Pou¾itie pevného disku s démonom"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Pou¾itie FTP s démonom"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Prosím skontrolujte èi je cron démon súèas»ou spus»ených slu¾ieb."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Odosla» e-mailovú správu po ka¾dej zálohe:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Èo"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Kde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kedy"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Viac mo¾ností"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup nastavenia"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Prosím zvoµte kam chcete zálohova»"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na pevný disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "cez sie»"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Prosím zvoµte èo chcete zálohova»"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Zálohovací systém"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Záloha U¾ívateµov"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Vybra» u¾ívateµov manuálne"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Zdroje zálohy: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systémové súbory:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Súbory pou¾ívateµov:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ostatné súbory:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Ulo¾i» na pevný disk na cestu : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Ulo¾i» na FTP na host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t Meno u¾ívateµa: %s\n"
-"\t\t na cestu: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Parametre:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNezahàna» systémové súbory\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tZálohovanie pou¾íva tar a bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tZálohovanie pou¾íva tar a gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Démon (%s) zahàòa :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Pevný disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Sie» cez FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Sie» cez SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "E¹te nenastavené, prosím pou¾ite Pomocníka alebo Roz¹írené.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Zoznam dát pre obnovu:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Zoznam poru¹ených dát:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Prosím odznaète alebo odstráòte to nabudúce."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Súbory zálohy boli poru¹ené"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          V¹etky Vami vybrané dáta boli         "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Úspe¹ne obnovené na %s  "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Obnovi» nastavenie"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK pre obnovu ostatných súborov."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Zoznam u¾ívateµov prew obnovu (je dôle¾itá iba posledná záloha)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Najskôr zálohuj systémové súbory:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "prosím, zvoµte dáta, ktoré chcete obnovi»"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Pre zálohovanie pou¾i» pevný disk"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Obnova z pevného disku"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Prosím, zadajte, kde sú ulo¾ené zálohy"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Vyberte iné médium pre obnovu"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Iné médium"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Obnovi» systém"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Obnov U¼ívateµov"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Obnov ostatné"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "vyberte cestu pre obnovu (okrem /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Pred obnovou urobi» novú zálohu (iba pre prírastkové zálohovanie)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Pred obnovou odstráò u¾ívateµské adresáre."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Obnov v¹etky zálohy"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Vlastná obnova"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pomoc"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Predchádzajúce"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Ulo¾"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Vytvor zálohu"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Obnova"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Ïal¹í"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Skôr ne¾ sa pokúsite obnovi», vytvorte zálohu..\n"
-"  alebo skontrolujte, èi je zadaná cesta správna."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Chyba pri odosielaní po¹ty\n"
-"  Vá¹ report nebol odoslaný\n"
-"  Prosím nastavte sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Zoznam balíèkov pre in¹taláciu"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Poèas posielania súboru cez FTP sa vyskytla chyba.\n"
-" Prosím skontrolujte správnos» FTP nastavenia."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Prosím, skontrolujte dáta ktoré chcete obnovi»..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Prosím, zvoµte médium pre zálohovanie..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Prosím, zvoµte médium pre zálohovanie..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nebol nájdený konfiguraèný súbor.\n"
-"Prosím vyberte Pomocník, alebo Roz¹írené."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Vo vývoji ... prosím vydr¾te."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Zálohuj systémové súbory"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Zálohuj u¾ívateµské súbory"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Zálohuj iné súbory"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Celkový priebeh"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "súbory odosielané cez FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Odosielam súbory..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Zoznam dát, ktoré budú na CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Prosím, zadajte rýchlos» va¹ej CD mechaniky"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Zadajte prosím meno zariadenia zapisovacej CD mechaniky (napr. 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Zvoµte, ak si ¾eláte ma» in¹talaèné CD spustiteµné."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Zálohuj podµa konfiguraèného súbora"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Zobraz nastavenie zálohovania."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Pomocník nastavenia"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Pokroèilá konfigurácia"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Zálohuj"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft   DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "In¹talácia %s zlyhala. Vyskytla sa nasledujúca chyba:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Hlada» nain¹talované fonty"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Odznaèi» nain¹talované fonty"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "zpracova» v¹etky fonty"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nena¹iel som ¾iadne fonty"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hotovo"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "Na pripojených oddieloch nieje mo¾né nájs» fonty"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Znovu vybra» správne fonty"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "nemô¾em nájs» ¾iaden font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Vyhµadávam fonty v zozname nain¹talovaných"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kópia fontu"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "In¹talácia True Type fontov"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Prosím èakajte poèas tmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "In¹talácia True Type fontov hotová."
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverzia fontov"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "vytváram type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Odkazy na Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "prevod ttf fontov"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "prevod pfm fontov"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Ignorova» pracovné súbory"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Re¹tart XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Ignorova» súbory s fontami"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs restart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Pred pridaním fontov sa prosím uistite, ¾e na va¹om poèítaèi máte práva ich "
-"pridáva».\n"
-"\n"
-"-Pre pridávanie fontov mô¾ete pou¾i» ¹tandartný spôsob. V ¹peciálnych "
-"prípadoch v¹ak chybné fonty mô¾u spôsobi» vytuhnutie X servera."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Import fontov"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Prevzia» fonty z Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Odstránenie fontov"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Pokroèilé nastavenia"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Zoznam fontov"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Zvoµte aplikácie ktoré budú podporova» fonty:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Tlaèiarne pre v¹eobecné pou¾itie"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Zvoµte adresár fontov a kliknite na 'Pridaj'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Nain¹taluj zoznam"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Kliknite sem, ak ste si istý."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "sem ak nie"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Odznaèi» v¹etky"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Vyber v¹etko"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Odstráni» zoznam"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Poèiatoèné testy"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopírova» fonty na vá¹ systém"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "In¹talácia a konverzia fontov"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Odstráni» fonty zo systému"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Zdieµanie pripojenia k internetu"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Zdieµanie internetového pripojenia je momentálne povolené"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Nastavenie zdieµania internetového pripojenia u¾ bolo urobené.\n"
-"Momentálne je povolené.\n"
-"\n"
-"Èo chcete urobi»?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "zakáza»"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "odmietnu»"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "prekonfigurova»"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Zakazujem servre..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Zdieµanie internetového pripojenia je teraz zakázane."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Zdieµanie internetového pripojenia je momentálne zakázane"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Nastavenie zdieµania internetového pripojenia u¾ bolo urobené.\n"
-"Momentálne je zakázané.\n"
-"\n"
-"Èo chcete urobi»?\""
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "povoli»"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Povoµujem servre..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Zdieµanie internetového pripojenia je teraz povolené."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Máte mo¾nos» nastavi» zdielanie pripojenia na internet. S touto funkciou\n"
-"budú môc» ostatné poèítaèe vo va¹ej lokálnej sieti pou¾íva» pripojenie na "
-"internet vá¹ho poèítaèa.\n"
-"\n"
-"Poznámka: Potrebujete samostatnú sie»ovú kartu na pripojenie lokálnej siete."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhranie %s (pou¾íva modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Rozhranie %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Vo va¹om systéme nieje sie»ovy adaptér!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Vo va¹om systéme nebol nájdený sie»ovy ethernet adaptér. Prosím spustite "
-"konfiguráciu hardweru."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Sie»ove rozhranie"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Vo va¹om systéme je iba jeden sie»ový adaptér:\n"
-"\n"
-"%s\n"
-"\n"
-"Lokálna sie» bude nastavená práve s týmto adaptérom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Prosím vyberte si sie»ovy adaptér, ktorý bude pripojený k va¹ej lokálnej "
-"sieti."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Sie»ové rozhranie je u¾ nastavené"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varovanie. Si»ový adaptér (%s) je u¾ nastavený.\n"
-"\n"
-"®eláte si automatickú rekonfiguráciu?\n"
-"\n"
-"Mô¾ete to urobi» manuálne, ale musíte vedie», èo robíte."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatická zmena konfigurácie"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Zobraz aktuálne nastavenie rozhrania"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuálne nastavenie `%s':\n"
-"\n"
-"Sie»: %s\n"
-"IP adresa: %s\n"
-"IP attribution: %s\n"
-"Ovládaè: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Je mo¾né zachova» súèasné nastavenie a predpoklada», ¾e u¾ máte nastavený "
-"DHCP server; v tom prípade prosím skontrolujte, ¾e je správne nastavená "
-"lokálna sie»; v nastaveniach sa nebudú robi» ¾iadne zmeny.\n"
-"\n"
-"Ak si to v¹ak ¾eláte, je mo¾né zmeni» aj rozhranie lokálnej siete, aj "
-"nastavenie DHCP serveru.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokálna sie» triedy C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP tohoto DHCP servera"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Opätovné nastavenie DHCP servera"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Èíslo lokálnej siete nekonèí na .0, zkú¹am znovu."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potenciálny konflik LAN adries v aktuálnej konfigurácii %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Bola nájdená kofigurácia firewalu!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Pozor! Bola nájdená existujúca konfigurácia firewallu. Mo¾no budete musiet "
-"urobi» zopár ruènych zásahov po in¹talácii."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurácia..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurácia skriptov, in¹talovanie programov, ¹tart serverov..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problémy pri in¹talácii balíèka %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"V¹etko bolo nastavené.\n"
-"Teraz mô¾ete zdieµa» va¹e pripojenie na internet s ostatnými poèítaèmi na "
-"va¹ej lokálnej sieti pou¾itím automatickéhonastavenia siete (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Nastavenie u¾ bolo urobené a je momentálne zakázané."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Nastavenie u¾ bolo urobené a je momentálne povolené."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Zdieµanie internetového pripojenia e¹te nebolo nastavené."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfigurácia zdiaµania pripojenia k internetu"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Vítajte v utilite na zdieµanie pripojenia k internetu!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Nastavi» ak chcete spusti» sprievodcu nastavením."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Konfigurácia siete (%d rozhraní)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Zma¾ profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Zmena profilu:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nový profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Meno nového profilu (nový profil bude vytvorený ako kópia aktuálneho)"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Meno poèítaèa: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Prístup k internetu"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Brána:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Rozhranie:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Èakajte prosím"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurácia prístupu k internetu..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Konfigurácia LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ovládaè"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Rozhranie"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurácia lokálnej siete..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Pre spustenie Pomocníka kliknite sem ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Sprievodca..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplikova»"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Prosím èakajte... Aplikujem konfiguráciu"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Pripojený."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nepripojený"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Pripojenie..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Odpojenie..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varovanie. Bolo rozpoznané iné pripojenie na internet, mo¾no pou¾íva va¹u "
-"sie»."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemáte nastavené ¾iadne rozhranie.\n"
-"Nastavte ho kliknutím na Konfiguruj"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Konfigurácia LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptér %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "©tartovací protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Spustené pri ¹tarte"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivuj teraz"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivuj"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Toto rozhranie e¹te nebolo nastavené.\n"
-"Spustite Pomocníka nastavenia v hlavnom okne"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemáte nastavené pripojenie na internet.\n"
-"Vytvorte ho zakliknutím tlaèítka konfiguruj"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfigurácia pripojenia internetu"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfigurácia pripojenia internetu"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Typ pripojenia: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametre"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Brána"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet karta"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Nastavujem úroveò bezpeènosti"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolné centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Vyberte nástroj, ktorý chcete pou¾i»"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanadská (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kábel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (kábel - hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Èína"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonsko"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonsko (kábel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Východná európa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Írsko"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Západná Európa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Austrália"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nový Zéland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Ju¾ná Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentína"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Prosím,\n"
-"zadajte va¹u TV normu a krajinu"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norma:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Oblas» :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Prebieha vyhµadávanie TV programov..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Vyhladávanie TV programov"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "pou¾itie: keyboarddrake [--expert] [klávesnica]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Prosím, zvoµte vá¹ typ klávesnice"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete aby BackSpace vrátil Delete na konzole?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vymeò CD"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Prosím vlo¾te in¹talaèné CD do mechaniky a stlaète Ok.\n"
-"Ak ho nemáte, stlaète Zru¹i» pre priamu aktualizáciu."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nemô¾em spusti» priamu aktualizáciu !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Ukáza» iba pre vybraný deò"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Súbor/_Nový"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Súbor/_Otvor"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Súbor/_Ulo¾"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>U"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Súbor/Ulo¾i» _ako"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Súbor/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Parametre"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Parametre/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pomoc"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoc/_O aplikácii..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "U¾ívateµ"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Správy"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Popis Mandrake Nástrojov"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "hµadaj"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Nástroj na monitorovanie logov"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Nastavenia"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "porovnávam"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "nezodpovedajú"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Zvoµte súbor"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendár"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Obsah súboru"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Výstraha cez Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "prosím èakajte, analyzujem súbor: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Nastavenie výstrahy cez SMS alebo e-mail"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Vitajte v nástroji na nastavenie SMS/e-mail.\n"
-"\n"
-"Tu budete môc» nastavit výstrahy systému.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "nastavenie slu¾ieb"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Ak nebude funkèná vyznaèená slu¾ba, budete upozornený"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "naèíta» nastavenie"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Ak load prekroèí túto hodnotu, budete upozornený"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "Konfigurácia upozornení"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Nastavte cestu, akou Vás má systém upozorni»"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Ulo¾ ako.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Prosím, zvoµte typ va¹ej my¹i."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nebolo nájdené serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulova» 3 tlaèítka?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s nájdené v %s, nastavi»?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Zvoµte scaner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Tento %s skener nieje podporovaný"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot zariadenie"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigurácia firewalu"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigurácia firewalu"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"U¾ máte nastavený firewall.\n"
-"Kliknite na Nastavi» ak ho chcete zmeni» alebo odtráni»"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknite na Nastavi» ak chcete nastavi» ¹tandardný firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Voµba jazyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Voµba triedy in¹talácie"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekcia pevného disku"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurácia my¹i"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Výber klávesnice"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpeènos»"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Súborové systémy"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formátovanie oddielov"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Výber balíkov"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "In¹talácia systému"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Vytváranie u¾ívateµov"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Sie»ové slu¾by"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastavenie slu¾ieb"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "In¹talácia zavádzaèa"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Zavádzacia disketa"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurácia X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "In¹talácia aktualizácií systému"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Koniec in¹talácie"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfigurátor\n"
-"\n"
-"Nastavuje osobný firewall pre vá¹ Linux Mandrake systém na tomto\n"
-"poèítaèi. "
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Teraz niekoµko otázok o tom, na ktoré slu¾by chcete dovoli» prístup\n"
-"z internetu. Prosím zva¾ujte èi potrebujete jednotlivé slu¾by preto¾e\n"
-"bezpeènos» vá¹ho poèítaèa je dôle¾itá.\n"
-"\n"
-"Ak nepou¾ívate tieto slu¾by, je lep¹ie zabráni» prístupu z internetu.\n"
-"Nastavenie mô¾ete zmeni» jednoducho opätovným spustením\n"
-"tejto aplikácie."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Chcete aby bol vá¹ www server dostupný z internetu ? Ak vám staèí\n"
-"dostupnos» iba z lokálneho servera, mô¾ete odpoveda» Nie.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Pou¾ívate na va¹om poèítaèi menný server ? Ak sa o va¹e DNS záznamy\n"
-"stará napríklad vá¹ poskytovateµ internetu, odpovedzte prosím nie. \n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Chcete dovoli» príchodzie Secure Shell (ssh) pripojenia ? Ssh je náhrada\n"
-"za telnet, ktorú mô¾ete pou¾i» na prihlásenie sa k vzdialenému serveru.\n"
-"Telnet nepou¾íva kódovanie. To znamená, ¾e útoèník mô¾e ukradnú» \n"
-"va¹e heslo. Ssh kódovanie pou¾íva, tak¾e kráde¾ vá¹ho hesla nehrozí."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Chcete dovoli» pripojenia cez telnet ? Toto je veµmi nebezpeèné.\n"
-"Silne doporuèujeme Tu odpoveda» NIE a pou¾i» ssh ako náhradu \n"
-"za telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Chcete pou¾íva» FTP server dosiahnuteµný cez internet ? Ak áno, veµmi \n"
-"doporuèujeme aby ste pou¾ívali iba anonymné prenosy. Akékoµvek heslo\n"
-"zaslané FTP serveru mô¾e by» ukradnuté, preto¾e FTP pri prenose hesiel\n"
-"nepou¾íva kódovanie.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Máte spustený mail server ? Ak pou¾ívate textové e-mail\n"
-"klieny ako pine, alebo mutt, tak asi máte. V opaènom prípade\n"
-"by ste túto slu¾bu mali vypnú».\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Máte spustené POP alebo IMAP slu¾by? Tieto mô¾u by»\n"
-"pou¾ité pre prístup k e-mailovým schránkam u¾ívateµov.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Vyzerá to, ¾e  máte kernel verzie 2.2.x. Ak je va¹a IP adresa\n"
-"automaticky nastavovaná pri zmene prostredia (domov, praca)\n"
-"potrebujete dovoli» túto mo¾nos». Je to tento prípad ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Má vá¹ poèítaè synchronizovaný èas voèi inému poèítaèu?\n"
-"Väè¹inou sa táto slu¾ba pou¾íva v stredne veµkých organizáciách\n"
-"kôli jednotnému èasu v logoch a podobne. Ak nie ste súèas»\n"
-"nieèoho väè¹ieho a e¹te ste o takejto slu¾be nepoèuli, \n"
-"pravdepodobne to nebudete potrebova»."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Kofigurácia kompletná. Mám zapísa» zmeny na disk ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nemô¾em otvori» %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Nemô¾em otvori» %s pre zápis: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Konfigurácia firewalu"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Prosím èakajte, pripravujem in¹taláciu"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sie»ovy poèítaè (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kancelária"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nástroje pre vá¹ Palm Pilot alebo Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Pracovná stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name a Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kancelárske programy: editory (kword, abiword), tabuµkové procesory "
-"(kspread, gnumeric), pdf prehliadaèe, atd"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Nástroje pre audio: mp¹ alebo midi prehrávaèe, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knihy a návody pre Linux a Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, atï"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Nástroje na mail, správy, web, prenos súborov, a chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Dtabázy"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL alebo MySQL databázový server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Nástroje na jednoduchú konfiguráciu vá¹ho poèítaèa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Pomôcky"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentácia"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolové nástroje"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetová stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedialna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurácia"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Viac grafických prostredí (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Enviroment, grafické prostredie s mno¾stvom pribalených programov"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafické prostredie"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache a Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Nástroje na vytvorenie a napálenie CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kancelárska stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, atï"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafické programy ako napr. The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C a C++ vývojove kni¾nice, programy a include súbory"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sie»ový server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/Správy"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Hracia stanica"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Prehravaèe a editory videa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zábavne programy: stolové, stratégie, atï"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Nástroje na èítanie a posielanie mailov a správ (pine, mutt, tin..) a "
-"prehliadanie www"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivácia, emulátory, monitorovanie"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Osobné financie"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Grafické rozhranie s aplikáciami a desktopovými nástrojmi"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienty pre rôzne protokoly vrátane ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Brána k internetu"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy na prehrávanie/editovanie zvuku a videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Iné grafické prostredia"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editory, shelly, súborove nástroje, terminály"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy na správu va¹ích financií, napr. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Osobný informaèný mana¾ment"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - CD napaµovanie"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vedecká stanica"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid "About"
-#~ msgstr "O "
-
-#~ msgid "             Help           "
-#~ msgstr "             Pomoc"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Nemô¾em pristupova» k modulom jadra, ktoré patria k Vá¹mu jadru (chýba "
-#~ "súbor %s)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Zvoµte predvolenú tlaèiareò"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Aplikuj/Znovu naèítaj"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Teraz mô¾ete zada» parametre pre modul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "pripojenie zlyhalo "
-
-#~ msgid "Low"
-#~ msgstr "Slabá"
-
-#~ msgid "Medium"
-#~ msgstr "Stredná"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr "V tejto úrovni je viac varovaní a kontroly."
-
-#~ msgid "Boot mode"
-#~ msgstr "Mód ¹tartu"
-
-#~ msgid "Export"
-#~ msgstr "Export"
-
-#~ msgid "click here"
-#~ msgstr "kliknite sem"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr ""
-#~ "Tento %s skener pou¾íva paralelný port, ktorý e¹te nieje podporovaný."
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux spravuje èas v GMT a prekladá ho na lokálny\n"
-#~ "èas s ohladom na èasovú zónu, ktorú ste zvolili."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Pripoji» k internetu"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Odpoji» od internetu"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigurácia sie»ového pripojenia (LAN alebo internet)"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Rozpoznané %s, ¾eláte si ho nastavi»?"
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Prosím zvoµte tlaèiareò, ktorú chcete nastavi»"
-
-#~ msgid "Infos"
-#~ msgstr "Informácie"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Hµadám mo¾né nfs zdroje"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Hµadám mo¾né nfs zdroje na serveri %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Hµadám mo¾né samba zdroje"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Hµadám mo¾né samba zdroje na serveri %s"
-
-#~ msgid "Removable media"
-#~ msgstr "Vymeniteµné médium"
-
-#~ msgid "Active"
-#~ msgstr "Aktívny"
-
-#~ msgid "No X"
-#~ msgstr "Nie X"
-
-#~ msgid "Base system only"
-#~ msgstr "Iba základný systém"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Bola zistená tlaèiareò, model \"%s\" na "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Lokálne zariadenie tlaèiarne"
-
-#~ msgid "Printer Device"
-#~ msgstr "Zariadenie tlaèiarne"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Chýba zariadenie alebo meno súboru."
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Tlaèiareò na vzdialenom CUPS serveri"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Tlaèiareò na vzdialenom serveri"
-
-#~ msgid " Linux "
-#~ msgstr " Linux"
-
-#~ msgid " System "
-#~ msgstr " Systém"
-
-#~ msgid " Other "
-#~ msgstr " Iná"
-
-#~ msgid " A Entire System  "
-#~ msgstr " Celý Systém"
-
-#~ msgid "please choose your CD space"
-#~ msgstr "Prosím zvoµte priestor na CD"
-
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr " Prosím skontrolujte èi pou¾ívate CDRW médium"
-
-#~ msgid " Tape "
-#~ msgstr " Páska"
-
-#~ msgid " Use .backupignore files"
-#~ msgstr "Pou¾i súbory .backupignore"
-
-#~ msgid "Configure it"
-#~ msgstr "Nastav to"
-
-#~ msgid "on CDROM"
-#~ msgstr "na CDROM"
-
-#~ msgid "on Tape Device"
-#~ msgstr "na Páskové zariadenie"
-
-#~ msgid " Cancel "
-#~ msgstr " Zru¹"
-
-#~ msgid "     Help      "
-#~ msgstr "     Pomoc"
-
-#~ msgid " Ok "
-#~ msgstr " Ok"
-
-#~ msgid "     Next      "
-#~ msgstr "     Nasledujúci"
-
-#~ msgid "close"
-#~ msgstr "zatvori»"
diff --git a/perl-install/share/po/sl.po b/perl-install/share/po/sl.po
deleted file mode 100644
index f27bc3b16..000000000
--- a/perl-install/share/po/sl.po
+++ /dev/null
@@ -1,11880 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Alen Salamun <alien@alienworld.org>, 2000.
-# (1938)
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-09-05 20:49+0200\n"
-"Last-Translator: Alen Salamun <alien@alienworld.org>\n"
-"Language-Team: Slovenian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafièna kartica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izberite grafièno kartico"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izberite stre¾nik X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Stre¾nik X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Izberite stre¾nik X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Stre¾nik X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Katero nastavitev stre¾nika XFree ¾elite?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a kartica lahko uporablja strojno 3D pospe¹evanje, ampak samo z XFree %"
-"s.\n"
-"Va¹a kartica je podprta s strani XFree %s, kjer je lahko bolj¹a 2D podpora."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va¹a kartica lahko uporablja strojno 3D pospe¹evanje z XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s strojnim 3D pospe¹evanjem"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va¹a kartica lahko uporablja strojno 3D pospe¹evanje z XFree %s,\n"
-"PODPORA JE ©E V RAZVOJU, RAÈUNALNIK SE LAHKO PRENEHA ODZIVATI."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s z RAZVOJNO strojno 3D pospe¹itvijo"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a kartica lahko uporablja strojno 3D pospe¹evanje, ampak samo z XFree %"
-"s,\n"
-"PODPORA JE ©E V RAZVOJU, RAÈUNALNIK SE LAHKO PRENEHA ODZIVATI.Va¹a kartica "
-"je podprta s strani XFree %s, kjer je lahko bolj¹a 2D podpora."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Nastavitev XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Izberite velikost pomnilnika grafiène kartice"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Izberite nastavitve stre¾nika"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Izberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Kritièna parametra sta: vertikalna osve¾itev (to je hitrost s katero je "
-"osve¾en celoten zaslon) in najbolj pomembna horizontalna osve¾itev (to je "
-"hitrost s katero so osve¾ene vrstice).\n"
-"\n"
-"ZELO POMEMBNO je, da ne izberete monitorja z osve¾itvami, ki so izven "
-"sposobnosti va¹ega monitorja. S tem lahko po¹kodujete monitor!\n"
-"Èe ste v dvomih, izberite konservativno nastavitev."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna sinhronizacija"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalna sinhronizacija"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor ni nastavljen"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafièna kartica ¹e ni nastavljena"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Loèljivost ¹e ni izbrana"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Pozor: testiranje te grafiène kartice lahko povzroèi neodzivanje raèunalnika"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Preizkus nastavitev"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"poskusite spremeniti nekatere parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Pri¹lo je do napake:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Zapu¹èam v %d sekundah"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Je to pravilna nastavitev?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Pri¹lo je do napake, poskusite spremeniti nekatere parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Loèljivost"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Izberite loèljivost in barvno globino"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafièna kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Stre¾nik XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Premakni"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "V redu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Napredni naèin"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Poka¾i vse"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Loèljivosti"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Razpored tipkovnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip mi¹ke: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Naprava mi¹ke: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontalna frekvenca monitorja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikalna frekvenca monitorja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafièna kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafièna kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafièni pomnilnik: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barvna globina: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Loèljivost: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Stre¾nik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gonilnik XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Priprava nastavitev X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Kaj ¾elite narediti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Spremeni monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Spremeni grafièno kartico"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Spremeni nastavitve stre¾nika"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Spremeni loèljivost"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Poka¾i informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testiraj ponovno"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Izhod"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Ohrani spremembe?\n"
-"Trenutna nastavitev:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X v zagonu"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Raèunalnik lahko samodejno pri zagonu sistema za¾ene stre¾nik X.\n"
-"®elite zagnati stre¾nik X pri zagonu?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Za uveljavitev sprememb, se ponovno prijavite v %s"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Odjavite se in nato pritisnite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 barv (8 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisoè barv (15 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisoè barv (16 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijonov barv (24 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde barv (32 bitov)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ali veè"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640×480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800×600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Zdru¾ljiv z 8514, 1024×768 @ 87 Hz prepleteno (brez 800×600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024×768 @ 87 Hz prepleteno, 800×600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Raz¹irjen Super VGA, 800×600 @ 60 Hz, 640×480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprepleten SVGA, 1024×768 @ 60 Hz, 800×600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visoko frekvenèen SVGA, 1024×768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor, ki zmore 1280×1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor, ki zmore 1280×1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor, ki zmore 1280×1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, ki zmore 1600×1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, ki zmore 1600×1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor zagonskega razdelka"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor pogona (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Namestitev SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam ¾elite namestiti zagonski nalagalnik?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Namestitev LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-#, fuzzy
-msgid "Yaboot"
-msgstr "Korenski"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne mo¾nosti zagonskega nalagalnika"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Glavne mo¾nosti zagonskega nalagalnika"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Namestitev zagonskega nalagalnika"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Zagonska naprava"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne deluje z starej¹imi BIOS-i)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Grafièni naèin"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pavza pred zaganjanjem privzete slike"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Geslo"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Geslo (ponovno)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Omejitev mo¾nosti ukazne vrstice"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "omeji"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Pri zagonu poèisti /tmp"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Natan¹na velikost pomnilnika RAM, èe je potrebno (najdenih %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omogoèi veè profilov"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Podajte velikost pomnilnika v MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Mo¾nost ``Omejitev mo¾nosti ukazne vrstice'' ni uporabna brez gesla"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Poskusite ponovno"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Gesla se ne ujemata"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Privzeto"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tukaj so razlièni vnosi.\n"
-"Lahko dodate ¹e kak¹nega ali spremenite obstojeèega"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Konèano"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Spremeni RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kak¹en tip vnosa ¾elite dodati?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ostali OS (Okna...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Slika"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Korenski"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Pripni"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Branje-pisanje"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Tvegano"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Labela"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Privzeto"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Odstrani vnos"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna labela ni dovoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Potrebujete razdelek swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ta labela je ¾e uporabljena"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Najdenih %s %s vmesnikov"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Imate ¹e kak¹nega?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate vmesnike %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Glejte informacije o strojni opremi"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Namestitev gonilnika za %s kartico %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kateri %s gonilnik naj poizkusim?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"V nekaterih primerih potrebuje gonilnik %s za pravilno delovanje dodatne\n"
-" informacije. Lahko se zgodi, da deluje normalno tudi brez. ®elite navesti\n"
-"dodatne nastavitve zanj ali dovolite gonilniku da poskusi pridobiti "
-"potrebne\n"
-"informacije samodejno? Lahko se zgodi, da se raèunalnik nepredvidoma "
-"ustavi,\n"
-"kar pa naj ne bi povzroèilo nobene ¹kode."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Samodejna zaznava"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Navedite nastavitve"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sedaj lahko posredujete nastavitve za modul %s.\n"
-"Nastavitve so oblike ``ime=vrednost ime2=vrednost2 ...''.\n"
-"Na primer: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Nastavitve modula:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Nalaganje modula %s je bilo neuspe¹no.\n"
-"®elite poskusiti znova z drugimi parametri?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(¾e dodano %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Geslo je preveè preprosto"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Vnesite uporabni¹ko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Uporabni¹ko ime mora vsebovati samo male èrke, ¹tevilke, `-' in `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "To uporabni¹ko ime je ¾e dodano"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj uporabnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Vnesite uporabnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Sprejmi uporabnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Uporabni¹ko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Lupina"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Samodejna prijava"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Raèunalnik lahko samodejno, po zagonu, v sistem prijavi uporabnika.\n"
-"Èe tega ne ¾elite, pritisnite gumb preklièi."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izberite privzetega uporabnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izberite okenskega upravitelja, ki naj bo pognan:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Dodaj uporabnika"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-#, fuzzy
-msgid "Custom"
-msgstr "Prilagojeno"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Zaganjam X"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Izberite pakete, ki jih ¾elite namestiti"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Preklièi"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr ""
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr ""
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr ""
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr ""
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr ""
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Privzeto"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Izberite nastavitve stre¾nika"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Pozdravljeni v izbiralcu operacijskega sistema %s!\n"
-"\n"
-"Izberite operacijski sistem iz zgornjega seznama ali\n"
-"pocakajte %d sekund za prevzet zagon.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Pozdravljeni v izbiralcu operacijskega sistema GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uporabite tipke %c in %c za izbiro vnosa"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za zagon izbranega OS, 'e' za urejevanje"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ukazov pred zagonom ali 'c' za ukazno vrstico."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Izbran vnos bo zagnan samodejno cez %d sekund."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "premalo prostora v /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Namizje"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Meni Start"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kam ¾elite namestiti zagonski nalagalnik?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoè ¹e ni implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izhod"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Spremeni monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Zagon Aurore pri nalaganju sistema"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Nastavitev X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemski naèin"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Zagon sistema X-Windows pri zagonu sistema"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ne ¾elim samodejne prijave"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, ¾elim samodejno prijavo s tem uporabnikom"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "V redu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab ni mogoèe odpreti za branje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Razdelkov ni veè mogoèe dodati"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Preklièi"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr ""
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr ""
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Splo¹no"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr ""
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr ""
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Namestiti"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr ""
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Najprej naredite varnostno kopijo podatkov"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Pazljivo preberite!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Èe nameravate uporabiti aboot, pustite dovolj prostega prostora (2048 "
-"sektorjev je dovolj)\n"
-"na zaèetku diska"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Napaka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Èarovnik"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izberite akcijo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Imate velik FAT razdelek (ponavadi v uporabi\n"
-"DOS-a/Oken). Predlagamo vam, da najprej \n"
-"spremenite velikost tega razdelka (pritisnite\n"
-"nanj, nato pa pritisnite \"Spremeni velikost\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kliknite na razdelek"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Podrobnosti"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "priklop neuspe¹en"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Drugo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipi datoteènih sistemov:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Ustvari"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Namesto tega uporabite ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Izbri¹i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najprej uporabite ``Odklopi''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Po spremembi tipa razdelka %s, bodo vsi podatki na tem razdelku izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Izberite akcijo"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Ustvarjanje novega razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Spremeni v napredni naèin"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Spremeni v normalen naèin"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Razveljavi"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Naj nadaljujem?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Zapri brez zapisovanja sprememb"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Zapri brez zapisovanja razdelitvene tabele?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Samodejno dodeljevanje"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Izbri¹i vse"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Prepoznavanje trdega diska"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Vsi primarni razdelki so uporabljeni"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Razdelkov ni veè mogoèe dodati"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Èe ¾elite imeti veè razdelkov, enega izbri¹ite, tako da bo mo¾no ustvariti "
-"raz¹irjen razdelek"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Zapi¹i razdelitveno tabelo"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Re¹evanje razdelitvene tabele"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Re¹evanje razdelitvene tabele"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Re¹evanje razdelitvene tabele"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izberite datoteko"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Velikost varnostne kopije zagonske tabele nima enake velikosti\n"
-"Naj nadaljujem?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Opozorilo"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vstavite disketo v disketni pogon\n"
-"Vsi podatki na tej disketi bodo unièeni"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Re¹evanje razdelitvene tabele"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Poka¾i informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Toèka priklopa"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Mo¾nosti"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Spremeni velikost"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premakni"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Priklopljeno"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj k RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-#, fuzzy
-msgid "Add to LVM"
-msgstr "Dodaj k RAID"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odklopi"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Odstrani iz RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-#, fuzzy
-msgid "Remove from LVM"
-msgstr "Odstrani iz RAID"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Spremeni RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Uporabi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Ustvarjanje novega razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Zaèetni sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tip datoteènega sistema: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Toèka priklopa:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Lastnosti:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatiranje loopback datoteko %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Spremeni tip razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kateri datoteèni sistem ¾elite?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam ¾elite priklopiti loopback datoteko %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam ¾elite priklopiti napravo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne morem izklopiti toèke priklopa, ker je ta razdelek uporabljen za "
-"loopback.\n"
-"Najprej odstranite loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Raèunanje mej FAT datoteènega sistema"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Spreminjanje velikosti"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Kateremu razdeleku ¾elite spremeniti velikost?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Podatki na tem razdelku naj bodo arhivirani"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Po spremembi velikosti razdelka %s bodo vsi podatki na tem razdelku "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Izberite novo velikost"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na kateri disk ¾elite premakniti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na kateri sektor ¾elite premakniti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Premikanje"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Premikanje razdelka..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izberite obstojeè RAID za dodajanje"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nov"
-
-#: ../../diskdrake/interactive.pm_.c:714
-#, fuzzy
-msgid "Choose an existing LVM to add to"
-msgstr "Izberite obstojeè RAID za dodajanje"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ta razdelek ne more biti uporabljen za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Ime loopback datoteke: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Pravo ime"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Datoteko ¾e uporablja drug loopback, izberite drugo"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka ¾e obstaja. Jo uporabim?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Nastavitve modula:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "naprava"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "stopnja"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "velikost kosa"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Bodite previdni: Ta operacija je nevarna."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kateri tip razdelitve?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Oprostite, vendar /boot ne morete ustvariti tako daleè na pogonu (na "
-"cilinder > 1024).\n"
-"Ali boste uporabljali LILO, ki ne bo deloval ali pa ne boste uporabljali "
-"LILO, tako da /boot ne potrebujete"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Razdelek, ki ste ga izbrali kot korenskega (/), se fizièno nahaja za\n"
-"1024-im cilindrom trdega diska in tudi razdelka /boot nimate.\n"
-"Èe nameravate uporabljati LILO, ne pozabite dodati /boot razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Za korenski (/) razdelek ste izbrali programski RAID razdelek.\n"
-"Nobeden zagonski nalagalnik ne bo deloval brez /boot razdelka.\n"
-"Ne pozabite dodati /boot razdelka"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Razdelitvena tabela pogona %s bo zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Preden bodo obveljale spremembe morate ponovno zagnati raèunalnik"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Po formatiranju razdelka %s bodo vsi podatki na tem razdelku izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiranje"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiranje loopback datoteko %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiranje razdelka %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Premalo razpolo¾ljivega prostora za nov razdelek"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Premalo razpolo¾ljivega prostora za nov razdelek"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Loèljivost: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Naprava:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Èrka DOS pogona: %s (ugibanje)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, fuzzy
-msgid "Name: "
-msgstr "Izberite stre¾nik"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Zaèetek: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorjev"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilinder %d do cilinder %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neformatirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Priklopljeno\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID ms%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Datoteka(e) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Prevzet zagonski razdelek\n"
-"    (za zagon MS-DOS, ne za lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Stopnja %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost kosa %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diski %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Datoteka loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindrov, %s glav, %s sektorjev\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informacije: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, fuzzy, c-format
-msgid "LVM-disks %s\n"
-msgstr "RAID-diski %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip razdelitvene tabele: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na vodilu %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Mo¾nosti: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tip datoteènega sistema: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Gesla se ne ujemata"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Spremeni tip razdelka"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Kliknite na razdelek"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Izberite stre¾nik"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s neuspe¹no"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Formatiranje %s s tipom %s ni poznano"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "napaka pri odklopu %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "preprosto"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "stre¾nik"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ne morete uporabiti na razdelkih manj¹ih od 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ne morete uporabiti na razdelkih manj¹ih od 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Toèke priklopa se morajo zaèeti z /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Razdelek s toèko priklopa %s ¾e obstaja\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Da imenik bi naj ostal na korenskem datoteènem sistemu"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Za to toèko priklopa potrebujete pravi datoteèni sistem(ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Za to toèko priklopa potrebujete pravi datoteèni sistem(ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Premalo razpolo¾ljivega prostora za nov razdelek"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Napaka pri odpiranju %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Pri¹lo je do napake - ni veljavnih naprav na katerih bi se lahko ustvaril "
-"nov datoteèni sistem. Preverite strojno opremo za mo¾en vzrok problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nimate razdelkov!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sedaj lahko izberete servise, ki se naj za¾enejo pri zagonu. Ko boste z\n"
-"mi¹ko nad servisom, se vam bo prikazal balonèek s pomoèjo, ki opisuje\n"
-"vlogo posameznega servisa.\n"
-"\n"
-"Bodite posebej pozorni pri tem koraku, èe boste raèunalnik uporabljali kot\n"
-"stre¾nik: verjetno ne boste ¾eleli poganjati servisov, ki jih ne ¾elite."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Izberite \"Namestitev\", èe nimate name¹èene ¹e nobene razlièice Mandrake "
-"Linux\n"
-"ali èe ¾elite uporabljati veè operacijskih sistemov.\n"
-"\n"
-"\n"
-"Izberite \"Nadgradnja\", èe ¾elite nadgraditi ¾e obstojeèo razlièico "
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"Glede na va¹e znanje o sistemu GNU/Linux, lahko izbirate med naslednjimi "
-"razredi namestitve ali nadgradnje\n"
-"operacijskega sistema Mandrake Linux:\n"
-"\n"
-"\t* Priporoèeno: èe niste ¹e nikdar name¹èali operacijskega sistema GNU/"
-"Linux izberite to mo¾nost. Namestitev bo preprosta,\n"
-"\t  odgovoriti boste morali samo na nekaj vpra¹anj.\n"
-"\n"
-"\n"
-"\t* Prilagojeno: èe poznate operacijski sistem GNU/Linux, lahko izberete "
-"primarni namen uporabe (delovna postaja,\n"
-"\t  stre¾nik, razvoj) va¹ega sistema. Odgovoriti boste morali na veè "
-"vpra¹anj kot pri namestitvi \"Priporoèeno\",\n"
-"\t  tako da morate za izbiro te namestitvene mo¾nosti poznati operacijski "
-"sistem GNU/Linux.\n"
-" \n"
-"\n"
-"\t* Napredno: èe zelo dobro poznate operacijski sistem GNU/Linux, lahko "
-"izberete to mo¾nost. Kot pri namestitvi \n"
-"\t \"Prilagojeno\", boste lahko tudi tukaj izbrali primarni namen uporabe "
-"(delovna postaja, stre¾nik, razvoj). \n"
-"\t  Bodite pazljivi pri izbiri te namestitve. Namestili boste posebej visoko "
-"prilagojeno namestitev.\n"
-"\t  Odgovori na nekatera vpra¹anja so lahko te¾avni, èe nimate dovolj znanja "
-"o sistemu GNU/Linux. Ne izberite\n"
-"\t  tega razreda, razen èe veste kaj poènete."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Izberite pravilna vrata. Npr: COM1 pod Okni so poimenovana ttyS0\n"
-"pod GNU/Linux-om."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) in Grub sta zagonska nalagalnika. Omogoèata zagon\n"
-"GNU/Linux-a ali kateregakoli drugega operacijskega sistema na va¹em\n"
-"raèunalniku. Ponavadi so drugi operacijski sistemi pravilno prepoznani in\n"
-"name¹èeni. V primeru, da ni tako, lahko tukaj roèno dodate vnos. Pazljivo\n"
-"izberite pravilne parametre."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Izberite kam ¾elite zapisati\n"
-"informacije potrebne za zagon GNU/Linux-a.\n"
-"\n"
-"\n"
-"Razen, èe natanèno veste kaj delate, izberite \"Prvi sektor pogona (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX bo sedaj posku¹al poiskati PCI SCSI krmilnik(e). \n"
-"Èe bo najden kak¹en SCSI krmilnik in prepoznan gonilnik zanj, bo gonilnik\n"
-"samodejno name¹èen.\n"
-"\n"
-"\n"
-"Èe nimate SCSI krmilnikov ali imate ISA ali PCI SCSI krmilnik, ki ga DrakX\n"
-"ne prepozna, boste vpra¹ani, èe imate v sistemu kak¹en SCSI krmilnik. Èe v\n"
-"sistemu nimate SCSI krmilnikov pritisnite \"Ne\". Èe boste pritisnili \"Da\" "
-"se\n"
-"vam bo odprl seznam gonilnikov, iz katerega lahko izberete krmilnik.\n"
-"\n"
-"\n"
-"Èe boste roèno izbrali gonilnik, vas bo DrakX vpra¹al èe ¾elite doloèiti\n"
-"nastavitve zanj. Dovolite DrakX-u, da jih poskusi nastaviti samodejno.\n"
-"\n"
-"\n"
-"Èe tega ne boste izbrali, boste morali nastavitve vnesti sami. Poglejte v\n"
-"uporabni¹ki priroènik (poglavje 3, razdelek \"Collective informations on "
-"your hardware)\n"
-"za nasvete, kako pridobiti to informacijo iz dokumentacije strojne opreme,\n"
-"spletne strani proizvajalca (èe imate dostop do internet-a) ali Microsoft "
-"Oken\n"
-"(èe jih imate name¹èena)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Potrebujete korenski razdelek.\n"
-"Ustvarite nov razdelek (ali izberite obstojeèega).\n"
-"Nato izberite ``Toèka prikljuèitve'' in jo nastavite na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Potrebujete razdelek swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nimate razdelka swap\n"
-"\n"
-"Naj vseeno nadaljujem?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Potrebujete razdelek swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Uporabi razpolo¾ljiv prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Premalo razpolo¾ljivega prostora za nov razdelek"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Uporabi obstojeè razdelek"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Na voljno ni nobenega obstojeèega razdelka"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Uporabi razdelek Oken (Windows) za loopback"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kateri razdelek ¾elite uporabiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izberite velikosti"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Velikost korenskega razdelka v MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Velikost razdelka swap v MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Uporabi razpolo¾ljiv prostor v razdelku Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kateremu razdeleku ¾elite spremeniti velikost?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Raèunanje mej datoteènega sistema Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Spreminjalec velikosti FAT ne deluje na va¹em razdelku, \n"
-"pri¹lo je do naslednje napake: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va¹ razdelek Oken (Windows) je preveè fragmentiran. Najprej po¾enite "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"OPOZORILO!\n"
-"\n"
-"DrakX bo sedaj spremenil velikost razdelku Oken (Windows). Bodite previdni:\n"
-"ta operacija je nevarna. Èe tega ¹e niste opravili, konèajte namestitev in\n"
-"za¾enite scandisk pod Okni (èe ¾elite po¾enite ¹e defrag), nato ponovno\n"
-"za¾enite namestitev. Naredite tudi varnostno kopijo podatkov.\n"
-"Èe ste preprièani, pritisnite \"V redu\"."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "razdelek %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Spreminjanje velikosti FAT neuspe¹no: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ni veè razdelkov FAT za spremembo velikosti ali uporabo kot loopback\n"
-"(ali premalo prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Brisanje celotnega diska"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Odstranjevanje Oken(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate veè kot en trdi disk, na katerega ¾elite namestiti Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VSI razdelki in podatki na disku %s bodo izgubljeni"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Uporabi obstojeè razdelek"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Uporabi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sedej lahko ustvarjate/spreminjate razdelke na %s.\n"
-"Po konèanem delu ne pozabite shraniti sprememb z ukazom `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Uporabi razpolo¾ljiv prostor v razdelku Oken (Windows)"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Razdelkov ni veè mogoèe dodati"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX-ov èarovnik za razdelke je najdel naslednje re¹itve:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Vklop omre¾ja"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Izklop omre¾ja"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Pri¹lo je do napake, ki je sistem ne zna obdelati na lep naèin.\n"
-"Nadaljujte na svojo odgovornost."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Podvojena toèka priklopa %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nekateri pomembni paketi niso bili ustrezno name¹èeni.\n"
-"Verjetno imate povarjen CD medij ali pogon CD-ROM.\n"
-"Preverite medij na raèunlaniku z Linux-om z uporabo ukaza \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Pozdravljeni v %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Na voljno ni nobenega disketnega pogona"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Vstop v korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Izberite kartico"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-#, fuzzy
-msgid "Percentage of packages to install"
-msgstr "Izberite kartico"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Razlièica: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Izberite kartico"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Namestiti"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Shrani na disketo"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Izhod iz namestitve"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izberite pakete, ki jih ¾elite namestiti"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Name¹èanje"
-
-#: ../../install_steps_gtk.pm_.c:509
-#, fuzzy
-msgid "Estimating"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostal èas "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Priprava namestitbe"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Name¹èanje paketa %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#, fuzzy
-msgid "Refuse"
-msgstr "Spremeni velikost"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Naj vseeno nadaljujem?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Izberite kartico"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-#, fuzzy
-msgid "Which installation class do you want?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "Namestiti"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Priporoèeno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Napredno"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Izberite pakete za namestitev"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-#, fuzzy
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavitev kartic PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-#, fuzzy
-msgid "Configuring IDE"
-msgstr "Nastavitev zaslona"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-#, fuzzy
-msgid "no available partitions"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-#, fuzzy
-msgid "Choose the mount points"
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:396
-#, fuzzy
-msgid "Root Partition"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:397
-#, fuzzy
-msgid "What is the root partition (/) of your system?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:435
-#, fuzzy
-msgid "Choose the partitions you want to format"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-#, fuzzy
-msgid "Formatting partitions"
-msgstr "Zaganjam X"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Complete (%dMB)"
-msgstr "Obièajni DAC"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, fuzzy, c-format
-msgid "Recommended (%dMB)"
-msgstr "Obièajni DAC"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Obnovi z diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Obnovi z diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Shrani na disketo"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Priprava namestitbe"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:842
-#, fuzzy
-msgid "Post-install configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-#, fuzzy
-msgid "Which is your timezone?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "Odstrani vnos"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Imate ¹e kak¹nega?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "Premakni"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-#, fuzzy
-msgid "Printer"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Nastavitev gesla root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1136
-#, fuzzy
-msgid "NIS Server"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-#, fuzzy
-msgid "First floppy drive"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, fuzzy
-msgid "Second floppy drive"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Preskok"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-#, fuzzy
-msgid "Sorry, no floppy drive available"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:1212
-#, fuzzy
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Izberite stre¾nik"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Namestitev zagonskega nalagalnika"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Automated"
-msgstr "Prilagojeno"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "Nalo¾i ponovno"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Izberite akcijo"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informacije"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Mo¾nosti: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Izberite tipkovnico"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabela"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Izberite tipkovnico"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kro¾ni priklopi %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Splo¹no"
-
-#: ../../mouse.pm_.c:46
-#, fuzzy
-msgid "Wheel"
-msgstr "stopnja"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:55
-#, fuzzy
-msgid "Mouse Systems"
-msgstr "Tip mi¹ke: %s\n"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "niè"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Preizkusite mi¹ko"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Preizkusite mi¹ko"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Izberite kartico"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-#, fuzzy
-msgid "Configuring network"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Napredni naèin"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-#, fuzzy
-msgid "ISDN Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Preizkus nastavitev"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-#, fuzzy
-msgid "Which protocol do you want to use ?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:216
-#, fuzzy
-msgid "Which is your ISDN card ?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../network/modem.pm_.c:44
-#, fuzzy
-msgid "Dialup options"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-#, fuzzy
-msgid "Connection name"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-#, fuzzy
-msgid "Login ID"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Nastavitev zaslona"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Nastavitev omre¾ja"
-
-#: ../../network/netconnect.pm_.c:50
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-#, fuzzy
-msgid "Network Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Izberite privzetega uporabnika:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Podvojena toèka priklopa %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Gonilnik XFree86: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-#, fuzzy
-msgid "Automatic IP"
-msgstr "Prilagojeno"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:366
-#, fuzzy
-msgid "DNS server"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-#, fuzzy
-msgid "Gateway device"
-msgstr "Zagonska naprava"
-
-#: ../../network/network.pm_.c:381
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-#, fuzzy
-msgid "Internet configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve."
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:76
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Izberite stre¾nik"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Izberite tipkovnico"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Nastavitev zaslona"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "priklop neuspe¹en: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-#, fuzzy
-msgid "nice"
-msgstr "Preklic"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Remote printer"
-msgstr "Odstrani vnos"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Izberite stre¾nik"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Izberite stre¾nik"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Izberite stre¾nik"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Izberite stre¾nik"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Izberite stre¾nik"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Tiskalnik"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Odstrani vnos"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "razdelek %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Izberite stre¾nik"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Privzeto)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-#, fuzzy
-msgid "Port"
-msgstr "Formatiraj"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Tiskalnik"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Podvojena toèka priklopa %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Tiskalnik"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Name¹èanje paketa %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Name¹èanje paketa %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-#, fuzzy
-msgid "SMB server host"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:705
-#, fuzzy
-msgid "SMB server IP"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-#, fuzzy
-msgid "Printer Server"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-#, fuzzy
-msgid "Description"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kateri tip razdelka ¾elite?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve."
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Testiraj ponovno"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Premakni"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Izklop omre¾ja"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Izklop omre¾ja"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Nastavitev RAMDAC"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Nastavitev omre¾ja"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor ni nastavljen"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nastavitev tiskalnika"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Name¹èanje paketa %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-#, fuzzy
-msgid "Printer options"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Nastavitev tiskalnika"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Xconfigurator bo zdaj zagnal X in preveril nastavitve."
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Tiskalnik"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Tukaj so razlièni vnosi.\n"
-"Lahko dodate ¹e kak¹nega ali spremenite obstojeèega"
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Tukaj so razlièni vnosi.\n"
-"Lahko dodate ¹e kak¹nega ali spremenite obstojeèega"
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Nastavitev omre¾ja"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Obièajni DAC"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Izberite stre¾nik"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Odstrani vnos"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Odstrani vnos"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Formatiraj"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Samodejna prijava"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Geslo"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Nastavitev gesla root"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Gesla se ne ujemata"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Zagon sistema X-Windows pri zagonu sistema"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Izberite stre¾nik"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "Nastavitev zaslona"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistemski naèin"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Odstrani vnos"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Izberite stre¾nik"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "naprava"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Opozorilo"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Pripni"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Korenski"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Meni Start"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Preizkus nastavitev"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Veèpredstavnost"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Izberite stre¾nik"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Napredno"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Name¹èanje paketa %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Napaka"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-#, fuzzy
-msgid "Congratulations!"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Namestiti"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Dodaj uporabnika"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatiranje loopback datoteko %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Odstrani vnos"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Odstranjevanje Oken(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Uporabni¹ko ime"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Preizkusite mi¹ko"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Poskusite ponovno"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Poskusite ponovno"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Nastavitev gesla root"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Kliknite na razdelek"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Preizkusite mi¹ko"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Tabela"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Uporabni¹ko ime"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Prepoznavanje trdega diska"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Uporabni¹ko ime"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "stopnja"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "stopnja"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Nastavitve modula:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Nastavitev datoteènega sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Mo¾nosti"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Kateri stre¾nik potrebujete?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Obnovi z diskete"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Drugo"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Namestitev sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Obnovi iz datoteke"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Obnovi iz datoteke"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Prilagojeno"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Pomoè"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Meni Start"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Obnovi iz datoteke"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Izberite pakete za namestitev"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Shrani v datoteko"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Preizkusite mi¹ko"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Izberite kartico"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Nastavitev datoteènega sistema"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Konèano"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Priprava namestitbe"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "omeji"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatiranje razdelkov"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Toèka priklopa"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Preklic"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Namestitev sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Izberite datoteko"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Odstrani vnos"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Namestiti"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Izhod iz namestitve"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "Tabela"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "Nastavitev X"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "Tabela"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor ni nastavljen"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Nastavitev zagonskega stila"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Name¹èanje paketa %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "priklop neuspe¹en: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Gateway:"
-msgstr "Zagonska naprava"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Nastavitev servisov"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Meni Start"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Èarovnik..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Preizkus nastavitev"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Izberite stre¾nik"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr ""
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#: ../../standalone/drakxconf_.c:48
-#, fuzzy
-msgid "Choose the tool you want to use"
-msgstr "Ali ¾elite zdaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Nalo¾i ponovno"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-#, fuzzy
-msgid "Please, choose your keyboard layout."
-msgstr "Izberite kartico"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Spremeni loèljivost"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Prika¾i samo za ta dan"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Datoteka/_Nova"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datoteka/_Odpri"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datoteka/_Shrani"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datoteka/Shrani _kot"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datoteka/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Mo¾nosti"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Mo¾nosti/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pomoè"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoè/_O pomoèi..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Uporabni¹ko ime"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "sporoèilo"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "i¹èi"
-
-#: ../../standalone/logdrake_.c:185
-#, fuzzy
-msgid "A tool to monitor your logs"
-msgstr "Orodje za nadziranje log-ov"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Nastavitve"
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "ujemanje"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "neujemanje"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Izberi datoteko"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Koledar"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Vsebina datoteke"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "prosim poèakaj, analiziram datoteko: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "naprava"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatiranje"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Shrani kot..."
-
-#: ../../standalone/mousedrake_.c:49
-#, fuzzy
-msgid "Please, choose the type of your mouse."
-msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Izberite grafièno kartico"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Zagonska naprava"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Izberite jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Izberite razred namestitve"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Prepoznavanje trdega diska"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Nastavitev mi¹ke"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Izberite tipkovnico"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Nastavitev datoteènega sistema"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiranje razdelkov"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izberite pakete za namestitev"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Namestitev sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodaj uporabnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nastavitev omre¾ja"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastavitev servisov"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Namestitev zagonskega nalagalnika"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Ustvarjanje zagonske diskete"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nastavitev X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Namestitev sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Izhod iz namestitve"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Napaka pri odpiranju %s za pisanje: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Nastavitev zaslona"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Priprava namestitbe"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Izberite stre¾nik"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "Preklic"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Veèpredstavnost"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "®elite preizkusiti nastavitev?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Veèpredstavnost"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "Nastavitve modula:"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Veèpredstavnost"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "stre¾nik"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Izberite stre¾nik"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Veèpredstavnost"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Nastavitev zaslona"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Veèpredstavnost"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Nastavitev zaslona"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Priklopljeno"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Niè"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Izberite privzetega uporabnika:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Odstrani vnos"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Sedaj lahko posredujete nastavitve za modul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "priklop neuspe¹en"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Veèpredstavnost"
-
-#~ msgid "Boot mode"
-#~ msgstr "Zagonski naèin"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Napredno"
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Sedaj lahko izberete èasovno cono, glede na to kje ¾ivite.\n"
-#~ "\n"
-#~ "\n"
-#~ "GNU/Linux uporablja èas v formatu GMT ali \"Greenwich Mean Time\" in ga\n"
-#~ "prevede v lokalni èas glede na izbrano èasovno cono."
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Nastavitev RAMDAC"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Na kateri disk ¾elite premakniti?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Izberite kartico"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informacije"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Nastavitev zaslona"
-
-#~ msgid "authentification"
-#~ msgstr "overjanje"
-
-#~ msgid "user"
-#~ msgstr "uporabnik"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Ali ¾elite sedaj zagnati ,X -probeonly`?"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Konèaj"
-
-#~ msgid "Active"
-#~ msgstr "Aktivno"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ne"
-
-#, fuzzy
-#~ msgid "Printer Device"
-#~ msgstr "Izberite stre¾nik"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Izberite stre¾nik"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Izberite stre¾nik"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistemski naèin"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Drugo"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Izberite kartico"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Kliknite na razdelek"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tip:"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Nastavitev X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Izberite stre¾nik"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Preklièi"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "V redu"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Premakni"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Nastavitev RAMDAC"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Nastavitev RAMDAC"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Izberite velikost, ki jo ¾elite namestiti"
-
-#~ msgid "Total size: "
-#~ msgstr "Celotna velikost: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Prosim poèakajte, "
-
-#~ msgid "Total time "
-#~ msgstr "Skupen èas"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Naj uporabim ¾e obstojeèo nastavitev X11?"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid "New"
-#~ msgstr "Nov"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Odstrani vnos"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Kliknite na razdelek"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin ni mogoèe odpreti za branje: %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Razen èe specifièno veste drugaèe, je obièajna izbira \"/dev/hda\"\n"
-#~ " (primaren master IDE disk) ali \"/dev/sda\" (prvi SCSI disk)."
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "®elite preizkusiti nastavitev?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "®elite preizkusiti nastavitev?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "®elite preizkusiti nastavitev?"
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Nastavitev zaslona"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Izberite privzetega uporabnika:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Preizkusite mi¹ko"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Izberite ¾eljen jezik za namestitev in uporabo sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Za nadaljevanje namestitve morate sprejeti pogoje zgornje licence.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kliknite na \"Sprejmem\", èe se strinjate z pogoji.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kliknite na \"Ne sprejmem\", èe se ne strinjate z pogoji. Namestitev se "
-#~ "bo konèala brez sprememb na sistemu."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Izberite iz seznama razpored, ki ustreza va¹i tipkovnici"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Èe ¾elite, da bodo po namestitvi na voljo tudi drugi jeziki\n"
-#~ "(zraven jezika, ki ste ga izbrali na zaèetku namestitve), jih izberite\n"
-#~ "s spodnjem seznamu. Èe ¾elite izbrati vse pritisnite \"Vse\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Izberite:\n"
-#~ "\n"
-#~ " - Prilagojeno: Èe ste dovolj seznanjeni z GNU/Linux-om lahko izberete\n"
-#~ "   primaren namen uporabe sistema. Glejte spodaj za podrobnosti.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Napredno: Priporoèeno samo èe ste z GNU/Linux-om zelo dobro "
-#~ "seznanjeni\n"
-#~ "   in ¾elite opraviti visoko prilagojeno namestitev. Tudi tukaj boste "
-#~ "lahko\n"
-#~ "   izbrali primaren namen uporabe sistema.\n"
-#~ "   IZBERITE TO MO®NOST, ÈE RESNIÈNO VESTE KAJ DELATE!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t  will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Sedaj morate izbrati namen uporabe sistema. Mo¾nosti so:\n"
-#~ "\n"
-#~ "\t* Delovna postaja: izberite, èe boste uporabljali sistem predvsem za "
-#~ "vsakodnevno uporabo\n"
-#~ "\t  doma ali v pisarni.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Razvoj: èe boste sistem uporabljali predvsem za razvoj programske "
-#~ "opreme, je to dobra izbira. Name¹èena\n"
-#~ "\t  bo celotna zbirka programske opreme za prevajanje, razhro¹èevanje in "
-#~ "oblikovanje izvorne kode in\n"
-#~ "\t  ustvarjanje programskih paketov.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Stre¾nik: èe boste sistem uporabljali kot stre¾nik, je to dobra "
-#~ "izbira. Namestili boste lahko datoteèni\n"
-#~ "\t  stre¾nik (NFS ali SMB), tiskalni¹ki stre¾nik (Unix ali Microsoft "
-#~ "Okna), overitveni stre¾nik (NIS), podatkovni\n"
-#~ "\t  stre¾nik itd.. Ne prièakuje namestitve nobenih dodatnih stvari (KDE, "
-#~ "GNOME, ipd.)."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Sedaj lahko izberete skupino paketov, ki jih ¾elite\n"
-#~ "namestiti ali nadgraditi\n"
-#~ "\n"
-#~ "DrakX bo nato preveril ali je za celotno namestitev na voljo dovolj "
-#~ "prostora\n"
-#~ "V primeru, da prostora ne bo dovolj, boste obve¹èeni. Èe boste kljub\n"
-#~ "temu nadaljevali, se bo namestitev nadaljevala z izbranimi paketi, "
-#~ "vendar\n"
-#~ "bodo nekateri manj pomembni izpu¹èeni. Èe boste na dnu seznama izbrali "
-#~ "mo¾nost\n"
-#~ "\"Izbira posameznih paketov\", boste lahko izbirali med veè kot 1000 "
-#~ "paketi..."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Èe imate vse CD-je iz spodnjega seznama, pritisnite 'V redu'.\n"
-#~ "Èe nimate nobenega CD-ja iz spodnjega seznama, pritisnite 'Preklièi'.\n"
-#~ "Èe nekateri CD-ji manjkajo, jih odizberite, nato pritisnite 'V redu'."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Sedaj lahko vnesete mo¾nosti omre¾ja na klic. Èe niste preprièani kaj "
-#~ "vnesti,\n"
-#~ "dobite pravilne informacije pri va¹em ponudniku internet-a."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Vnesite:\n"
-#~ "\n"
-#~ "  - Naslov IP: èe ga ne poznate, povpra¹ajte vzdr¾evalca va¹ega omre¾ja.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Omre¾na maska: \"255.255.255.0\" je ponavadi pravilna izbira. Èe "
-#~ "niste\n"
-#~ "preprièani, povpra¹ajte vzdr¾evalca omre¾ja.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Samodejni IP: izberite to mo¾nost, èe v omre¾ju uporabljate protokol\n"
-#~ "BOOTP ali DHCP. Pri izbiri te mo¾nosti ni potrebno vnesti \"Naslov IP\". "
-#~ "Èe\n"
-#~ "niste preprièani, povpra¹ajte vzdr¾evalca va¹ega omre¾ja.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Èe va¹e omre¾je uporablja NIS, izberite \"Uporabi NIS\". Èe niste "
-#~ "preprièani,\n"
-#~ "povpra¹ajte vzdr¾evalca va¹ega omre¾ja."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Sedaj lahko vnesete mo¾nosti omre¾ja na klic. Èe niste preprièani kaj "
-#~ "vnesti,\n"
-#~ "dobite pravilne informacije pri va¹em ponudniku internet-a."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Èe boste uporabljali stre¾nik proxy, ga sedaj nastavite. Èe niste "
-#~ "preprièani\n"
-#~ "ali naj ga uporabljate, povpra¹ajte va¹ega ponudnika internet-a."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Paket za kriptografijo lahko namestite, èe ste pravilno namestili "
-#~ "povezavo v\n"
-#~ "internet. Najprej izberite zrcalni stre¾nik iz katerega ¾elite prenesti\n"
-#~ "pakete, nato izberite pakete, katere ¾elite namestiti.\n"
-#~ "\n"
-#~ "Zrcalni stre¾nik in pakete izberite v skladu z va¹o zakonodajo."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Sedaj lahko vnesete geslo root za va¹ sistem Mandrake Linux\n"
-#~ "Geslo morate vnesti dvakrat, da se preveri identiènost obeh\n"
-#~ "vnosov.\n"
-#~ "\n"
-#~ "Uporabnik root je administrator sistema in edini uporabnik, ki lahko\n"
-#~ "spreminja nastavitev sistema. Zato izberite geslo posebej pazljivo!\n"
-#~ "Neavtorizirana uporaba raèuna root je lahko zelo nevarna za integriteto\n"
-#~ "va¹ega sistema in podatkov, ter ostalih sistemov povezanih nanj. Geslo "
-#~ "naj\n"
-#~ "bo sestavljeno iz alfanumeriènih znakov in dolgo vsaj 8 znakov. NIKOLI "
-#~ "ga\n"
-#~ "nikamor ne zapisujte. Ne izberite predolgega ali preveè kompliciranega\n"
-#~ "gesla, da ga ne boste pozabili!"
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Sedaj lahko ustvarite enega ali veè \"navadnih\" uporabni¹kih raèunov.\n"
-#~ "Ustvarite lahko enega ali veè raèunov za vsako osebo, ki ji boste "
-#~ "dovolili\n"
-#~ "uporabo raèunalnika. Vsak uporabnik bo imel svoje lastnosti (grafièno\n"
-#~ "okolje, nastavitve programov itd.) in svoj \"domaè imenik\", v katerem "
-#~ "bodo\n"
-#~ "te lastnosti shranjene.\n"
-#~ "\n"
-#~ "Najprej ustvarite raèun zase! Tudi èe boste edin uporabnik sistema, se "
-#~ "NE\n"
-#~ "PRIJAVLJAJTE kot root za vsakodnevna opravila. To bi bil velik varnosti\n"
-#~ "riziko, saj je neuporabnost sistema lahko oddaljena samo eno tipkarsko\n"
-#~ "napako!\n"
-#~ "\n"
-#~ "Zato se prijavljajte v sistem z uporabni¹kim raèunom, ki ga boste "
-#~ "ustvarili\n"
-#~ "tukaj. Kot root se prijavite samo za administracijske in vzdr¾evalne "
-#~ "namene."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Glavne mo¾nosti LILO in Grub so:\n"
-#~ "  - Zagonska naprava: Ime naprave (npr. razdelka na trdem disku\n"
-#~ "ki vsebuje zagonski sektor. Razen, èe specifièno veste drugaèe izberite\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pavza pred zagonom prevzete slike: Èas v desetinkah sekunde, ki ga "
-#~ "naj\n"
-#~ "zagonski nalagalnik èaka, preden zaène zaganjati prvo sliko.\n"
-#~ "Ta mo¾nost je uporabna za sisteme, ki takoj po prepoznani tipkovnici\n"
-#~ "zaènejo zaganjati sistem. Zagonski nalagalnik ne èaka, èe pavza ni "
-#~ "doloèena\n"
-#~ "ali èe je vrednost postavljena na niè.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video naèin: Tekstoven naèin VGA, ki naj bo izbran ob zagonu. Na "
-#~ "voljo\n"
-#~ "so naslednje vrednosti: \n"
-#~ "    * normal: normalen tekstoven naèin 80x25.\n"
-#~ "    * <¹tevilka>: uporabi ustrezen tekstoven naèin."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO je SPARC zagonski nalagalnik: omogoèa zagon\n"
-#~ "GNU/Linux-a ali kateregakoli drugega operacijskega sistema na va¹em\n"
-#~ "raèunalniku. Ponavadi so drugi operacijski sistemi pravilno prepoznani "
-#~ "in\n"
-#~ "name¹èeni. V primeru, da ni tako, lahko tukaj roèno dodate vnos. "
-#~ "Pazljivo\n"
-#~ "izberite pravilne parametre.\n"
-#~ "\n"
-#~ "\n"
-#~ "Lahko drugim tudi prepreèite dostop do ostalih operacijskih sistemov. V\n"
-#~ "tem primeru izbri¹ite odgovarjajoèe vnose, vendar boste za njihov zagon\n"
-#~ "kasneje potrebovali zagonsko disketo!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Glavne mo¾nosti SILO so:\n"
-#~ "  - Namestitev zagonskega nalagalnika: Izberite kam ¾elite zapisati\n"
-#~ "informacije potrebne za zagon GNU/Linux-a. Razen, èe natanèno veste\n"
-#~ "kaj delate, izberite \"Prvi sektor pogona (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Pavza pred zagonom prevzete slike: Èas v desetinkah sekunde, ki ga "
-#~ "naj\n"
-#~ "zagonski nalagalnik èaka, preden zaène zaganjati prvo sliko.\n"
-#~ "Ta mo¾nost je uporabna za sisteme, ki takoj po prepoznani tipkovnici\n"
-#~ "zaènejo zaganjati sistem. Zagonski nalagalnik ne èaka, èe pavza ni "
-#~ "doloèena\n"
-#~ "ali èe je vrednost postavljena na niè."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Sedaj je èas za nastavitev sistema X Windows, ki je jedro grafiènega\n"
-#~ "sistema GNU/Linux. Nastaviti morate grafièno kartico in monitor. Veèina\n"
-#~ "korakov je samodejnih, tako da boste verjetno morali samo preveriti\n"
-#~ "kaj je bilo narejeno in sprejeti nastavitve :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Po konèani nastavitvi, se bo zagnal sistem X (razen, èe niste tega\n"
-#~ "onemogoèili v DrakX), tako da boste lahko preverili èe so vse nastavitve\n"
-#~ "pravilne. Èe nastavitve ne bodo pravilne, jih lahko ponovno spremenite\n"
-#~ "kolikokrat bo paè potrebno."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Èe je v nastavitvah sistema X kaj narobe, uporabite te mo¾nosti za "
-#~ "pravilno\n"
-#~ "nastavitev sistema X Windows."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Èe bi raj¹i uporabljali grafièno prijavljanje v sistem, izberite \"Da\". "
-#~ "Drugaèe\n"
-#~ "izberite \"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Sistem se bo ponovno zagnal.\n"
-#~ "\n"
-#~ "Po zagonu, se bo samodejno nalo¾il va¹ nov sistem Mandrake Linux.\n"
-#~ "Èe ¾elite zagon drugega operacijskega sistema, preberite dodatna navodila."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Zapi¹i /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatiraj vse"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Po formatiranju vseh razdelkov,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "bodo vsi podatki na teh razdelkih izgubljeni"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Tabela"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Nastavitev RAMDAC"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Premakni"
-
-#, fuzzy
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Izberite stre¾nik"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "priklop neuspe¹en: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Za bolj varen sistem izberite \"Uporabi datoteko 'shadow'\" in\n"
-#~ "\"Uporabi gesla MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Èe va¹e omre¾je uporablja NIS, izberite \"Uporabi NIS\". Èe niste "
-#~ "preprièani,\n"
-#~ "povpra¹ajte vzdr¾evalca va¹ega omre¾ja."
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kateri frekvenèni èip (ang. clockchip) imate?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Kateri zagonski nalagalnik ¾elite uporabljati?"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Nastavitev zagonskega stila"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horizontalna aurora (lep¹i izgled)"
-
-#~ msgid "vertical traditionnal aurora"
-#~ msgstr "vertikalna tradicionalna aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Sedaj lahko izberete razliène mo¾nosti sistema.\n"
-#~ "\n"
-#~ "  - Uporabi optimizacijo za trde diske: ta mo¾nost lahko izbolj¹a "
-#~ "delovanje\n"
-#~ "    trdih diskov, vendar je samo za napredne uporabnike. Nekateri nabori\n"
-#~ "    èipov z napakami lahko unièijo podatke, zato bodite pazljivi. Jedro\n"
-#~ "    ima vgrajeno seznam pogonov in naborov, ki povzroèajo probleme, "
-#~ "vendar\n"
-#~ "    èe se ¾elite izogniti neprijetnim preseneèenjem, pustite mo¾nost\n"
-#~ "    neizbrano.\n"
-#~ "\n"
-#~ "  - Izberite varnostno stopnjo: izberete lahko varnostno stopnjo\n"
-#~ "    sistema. Za popolne informacije poglejte v navodila. Osnovno: \n"
-#~ "    èe neveste, izberite \"Srednja\".\n"
-#~ "\n"
-#~ "  - Natanèna velikost RAM-a. èe je potrebno: na¾alost, je dana¹njem "
-#~ "svetu\n"
-#~ "    PC raèunalnikov ni standardne metode spra¹evanja BIOS-a za velikost\n"
-#~ "    prisotnega pomnilnika. Zato lahko GNU/Linux nepravilno prepozna "
-#~ "velikost\n"
-#~ "    pomnilnika. V tem primeru lahko tukaj podate pravilno velikost "
-#~ "pomnilnika.\n"
-#~ "    Razlika za 2 ali 4 MB je normalna.\n"
-#~ "\n"
-#~ "  - Samodejno priklapljanje odstranitvenih medijev: èe ne ¾elite roèno\n"
-#~ "    priklapljati odstranitvenih medijev (CD-ROM, diskete, Zip...) z "
-#~ "uporabo\n"
-#~ "    ukazov \"mount\" in \"umount\", izberite to mo¾nost.\n"
-#~ "\n"
-#~ "  - Omogoèen NumLock pri zagonu: èe ¾elite NumLock omogoèiti pri zagonu,\n"
-#~ "    izberite to mo¾nost (Opozorilo: NumLock lahko pod sistemom X dela ali "
-#~ "ne\n"
-#~ "    dela)."
-
-#~ msgid "Configure timezone"
-#~ msgstr "Nastavitev èasovne cone"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Drugo"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Uporabi diskdrake"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Izberite \"Namestitev\", èe nimate name¹èene ¹e nobene razlièice\n"
-#~ "GNU/Linux-a ali èe ¾elite uporabljati veè razliènih distribucij.\n"
-#~ "\n"
-#~ "Izberite \"Re¹evanje\", èe ¾elite re¹iti prej¹njo razlièico Linux-a "
-#~ "Mandrake:\n"
-#~ "%s ali %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Izberite:\n"
-#~ "\n"
-#~ " - Priporoèen: Èe niste ¹e nikdar name¹èali GNU/Linux-a, izberite to "
-#~ "mo¾nost.\n"
-#~ "\n"
-#~ " - Prilagojen: Èe ste dovolj seznanjeni z GNU/Linux-om, lahko izberete\n"
-#~ "   primaren namen uporabe sistema. Glejte spodaj za podrobnosti.\n"
-#~ "\n"
-#~ " - Napreden: Priporoèeno samo èe ste z GNU/Linux-om zelo dobro "
-#~ "seznanjeni\n"
-#~ "   in ¾elite opraviti zelo prilagojeno namestitev. Tudi tukaj boste "
-#~ "lahko\n"
-#~ "   izbrali primaren namen uporabe va¹ega sistema.\n"
-#~ "   IZBERITE TO MO®NOST, ÈE RESNIÈNO VESTE KAJ DELATE!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "Na tej toèki lahko izberete, katere razdeleke boste uporabili za "
-#~ "namestitev\n"
-#~ "sistema Mandrake Linux, èe so ¾e definirani (iz prej¹njih namestitev GNU/"
-#~ "Linux\n"
-#~ "ali z drugimi orodji za razdelke). V drugih primerih je potrebo na trdem "
-#~ "disku\n"
-#~ "definirati razdelke. S tem razdelite kapaciteto trdega diska v loèena "
-#~ "logièna podroèja.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe morate ustvariti nove razdelke, uporabite za samodejno ustvarjanje "
-#~ "razdelkov\n"
-#~ "GNU/Linux \"Samodejno alociranje\". Trdi disk izberete s pritiskom na "
-#~ "\"hda\"\n"
-#~ "za prvi IDE disk, \"hdb\" za drugi ali \"sda\" za prvi SCSI disk itd.\n"
-#~ "\n"
-#~ "Dva pogosta razdelka sta: korenski razdelek (/), ki je zaèetna toèka\n"
-#~ "zgradbe imenika datoteènega sistema in /boot, ki vsebuje vse datoteke\n"
-#~ "potrebne za zagon operacijskega sistema, po vklopu raèunalnika.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ker so uèinki tega koraka nepovratni, je lahko ustvarjanje razdelkov\n"
-#~ "za neizku¹enega uporabnika nevarno in zastra¹ujoèe. DiskDrake vam\n"
-#~ "bo pri tem koraku karseda olaj¹al delo. Preden nadaljujete si vzemite\n"
-#~ "èas in poglejte dokumentacijo.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do vsake mo¾nosti lahko pridete z tipkami: med razdelki izbirate z\n"
-#~ "uporabo tipke Tab in pu¹èic Navzgor/Navzdol. Ko izberete razdelek "
-#~ "pritisnite:\n"
-#~ "\n"
-#~ "- Ctrl-c za ustvarjanje novega razdelka (èe ste izbrali prazen razdelek)\n"
-#~ "\n"
-#~ "- Ctrl-d za brisanje razdelka\n"
-#~ "\n"
-#~ "- Ctrl-m za nastavitev toèke priklopa\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Vsi, na novo ustvarjeni razdelki morajo biti pred uporabo formatirani\n"
-#~ "(formatiranje pomenu ustvarjanje datoteènega sistema). Na tej toèki\n"
-#~ "lahko ponovno formatirate obstojeèe razdelke, tako da bodo podatki, ki\n"
-#~ "jih vsebujejo izbrisani. Opozorilo: obstojeèih razdelkov vam ni potrebno\n"
-#~ "ponovno formatirati, posebej, èe vsebujejo datoteke ali podatke, ki jih "
-#~ "¾elite obdr¾ati. Ponavadi sta to razdelka /home in /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Izbrani paketi se sedaj name¹èajo. Ta operacija bo trajala nekaj\n"
-#~ "minut, razen èe ste izbrali nadgradnjo obstojeèega sistema, v tem\n"
-#~ "primeru lahko preteèe veè èasa celo preden se bo nadgradnja zaèela."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Èe DrakX ni na¹el mi¹ke ali èe ¾elite preveriti izbiro, boste\n"
-#~ "sedaj spodaj videli seznam mi¹k.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe se strinjate z nastavitvami DrakX, pritisnite 'V redu'.\n"
-#~ "Drugaèe lahko iz menija izberete mi¹ko, ki se bolje ujema z va¹o.\n"
-#~ "\n"
-#~ "\n"
-#~ "V primeru serijske mi¹ke, boste morali nastaviti tudi serijska vrata\n"
-#~ "na katera je prikljuèena."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ta del je posveèen nastavitvi lokalnega omre¾ja (LAN)\n"
-#~ "ali modema.\n"
-#~ "\n"
-#~ "Izberite \"Lokalno omre¾je\" in DrakX bo posku¹al\n"
-#~ "najti mre¾no kartico v raèunalniku. PCI kartice\n"
-#~ "bi morale biti najdene in inicializirane samodejno.\n"
-#~ "Èe imate kartico tipa ISA, samodejna prepoznava ne bo delovala, tako\n"
-#~ "da boste morali izbrati gonilnik iz seznama, ki se bo prikazal.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tako kot za SCSI krmilnike, lahko tudi tukaj prviè prepustite iskanje\n"
-#~ "naprave gonilniku, drugaèe pa morate gonilniku podati pravilne "
-#~ "nastavitve,\n"
-#~ "ki jih lahko najdete s pomoèjo dokumentacije va¹e strojne opreme.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe name¹èate sistem Mandrake Linux na raèunalnik, ki je del ¾e "
-#~ "obstojeèega\n"
-#~ "omre¾ja, vam bo va¹ vzdr¾evalec omre¾ja posredoval vse potrebne\n"
-#~ "informacije (naslov IP, omre¾na maska in ime raèunalnika). Èe doma\n"
-#~ "postavljate privatno omre¾je samo za primer, izberite naslov sami.\n"
-#~ "\n"
-#~ "\n"
-#~ "Izberite \"Klicanje z modemom\" za nastavitev modemske povezave v\n"
-#~ "internet. DrakX bo posku¹al najti modem, èe ne bo uspel, boste\n"
-#~ "morali nastaviti pravilna serijska vrata, na katerih imate prikljuèen\n"
-#~ "modem."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux omogoèa uporabo mnogih tipov tiskalnikov. Vsak tip\n"
-#~ "zahteva razliène nastavitve. Upo¹tevajte pa, da je prevzeto ime\n"
-#~ "za tiskalnik, ki ga uporablja sistem, 'lp'; tako da morate imeti\n"
-#~ "tiskalnik s tem imenom; lahko pa tiskalniku daste veè imen, loèenih z\n"
-#~ "znakom '|'. Èe ¾elite imeti bolj smiselno ime za tiskalnik, ga dajte\n"
-#~ "na prvo mesto npr: \"Moj tiskalnik|lp\".\n"
-#~ "Tiskalnik, ki bo imel v imenu \"lp\" bo prevzet tiskalnik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe je tiskalnik fizièno povezan z raèunalnikom izberite\n"
-#~ "\"Lokalen tiskalnik\". Nato boste morali izbrati primeren filter in\n"
-#~ "vrata, na katera je tiskalnik prikljuèen.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe ¾elite uporabljati tiskalnik, ki se nahaja na drugem raèunalniku "
-#~ "Unix,\n"
-#~ "morate izbrati \"Oddaljen lpd\". Za delovanje ni potrebno vnesti\n"
-#~ "uporabni¹kega imena in gesla, vnesti morate samo ime tiskalni¹ke vrste\n"
-#~ "(printer queue) na oddaljenem stre¾niku.\n"
-#~ "\n"
-#~ "\n"
-#~ "Èe ¾elite uporabljati tiskalnik SMB (tiskalnik, ki je prikljuèen na "
-#~ "raèunalnik\n"
-#~ "z operacijskim sistemom Okna 9x/NT), morate poznati njegovo SMB ime (to "
-#~ "ni\n"
-#~ "njegovo TCP/IP ime) in verjetno ¹e njegov naslov IP. Za dostop pa boste\n"
-#~ "potrebovali ¹e uporabni¹ko ime, geslo in delovno skupino. Enako velja za\n"
-#~ "tiskalnik prikljuèen na Netware okolje, le da zanj ne potrebujete "
-#~ "delovne\n"
-#~ "skupine."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Zelo priporoèljivo je, da tukaj odgovorite z \"Da\". Èe boste kasneje\n"
-#~ "name¹èali Microsoft Okna, bodo Okna povozila zagonski sektor.\n"
-#~ "Razen, èe boste naredili zagonski disk kot predlagano, ne boste mogli "
-#~ "veè\n"
-#~ "zagnati sistema GNU/Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Premaknite kolesce!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Pozabi spremembe?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Samodejna loèljivost"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Za zaznavo mo¾nih loèljivosti, bodo sedaj razliène preizku¹ene.\n"
-#~ "Zaslon bo utripal...\n"
-#~ "Èe ¾elite, ga lahko izklopite, po koncu boste sli¹ali pisk"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Mo¾ne loèljivosti se lahko poi¹èejo samodejno (npr: 800x600).\n"
-#~ "Vèasih lahko pride do nepredvidene ustavitve sistema.\n"
-#~ "®elite poskusiti?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Najden ni bil noben veljaven naèin\n"
-#~ "Poskusite z drugo grafièno kartico ali monitorjem"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Samodejno iskanje loèljivosti"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "nfs priklop neuspe¹en"
diff --git a/perl-install/share/po/sp.po b/perl-install/share/po/sp.po
deleted file mode 100644
index 418059c8c..000000000
--- a/perl-install/share/po/sp.po
+++ /dev/null
@@ -1,12461 +0,0 @@
-# Cirilicni prevod drakbootdisk.po fajla.
-# Copyright (C) 1997-2000 GeaArt, Inc.
-# Tomislav Jankovic <tomaja@net.yu>, 2000.
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: drakfloppy 0.43\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: 2001-08-25 08:36GMT+1\n"
-"Last-Translator: Toma Jankovic <tomaja@net.yu>\n"
-"Language-Team: SERBIAN <office@mandrake.co.yu>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-5\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr "¿ÞÔÕáØ áÒÕ ÓÛÐÒÕ ÝÕ×ÐÒØáÝÞ"
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr "ºÞàØáâØ Xinerama ÕÚáâÕÝ×Øjã"
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "¿ÞÔÕáØ áÐÜÞ ÚÐàâØæã \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Multi-head configuration"
-msgstr "Multi-head ÚÞÝäØÓãàÐæØøa"
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"²aè áØáâÕÜ ßÞÔàÖÐÒÐ Üultiple head ÚÞÝäØÓãàÐæØjã.\n"
-"´Ð ÛØ âÞ ÖÕÛâÕ ÔÐ ãàÐÔØâe?"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr "³àÐäØçÚÐ ÚÐàâØæÐ"
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr "¸×ÐÑÕàØâÕ ÚÐàâØæã"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr "¸×ÐÑÕàØâÕ X áÕàÒÕà"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr "X áÕàÒÕà"
-
-#: ../../Xconfigurator.pm_.c:294
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "¸×ÐÑÕàØâÕ X áÕàÒÕà"
-
-#: ../../Xconfigurator.pm_.c:294
-#, fuzzy
-msgid "X driver"
-msgstr "X áÕàÒÕà"
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ºÞøã XFree ÚÞÝäØÓãàÐæØjã ÖÕÛØâÕ ÔÐ ØÜÐâe ?"
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"²aèÐ ÚÐàâØæÐ ÜÞÖÕ ØÜÐâØ 3D åÐàÔÒÕàáÚã ÐÚæÕÛÕàÐæØjã ÐÛØ áÐÜÞ áa XFree %s.\n"
-"²aèã ÚÐàâØæã ßÞÔàÖÐÒa XFree %s ÚÞjØ ÜÞÖÕ ØÜaâØ ÑÞùã ßÞÔàèÚã Ø ×Ð 2D."
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "²aèÐ ÚÐàâØæÐ ÜÞÖÕ ØÜÐâØ 3D åÐàÔÒÕàáÚã ÐÚæÕÛÕàÐæØjã áÐ XFree %s."
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s áÐ 3D åÐàÔÒÕàáÚÞÜ ÐÚæÕÛÕàÐæØjÞÜ"
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"²aèÐ ÚÐàâØæÐ ÜÞÖÕ ØÜÐâØ 3D åÐàÔÒÕàáÚã ÐÚæÕÛÕàÐæØjã ÐÛØ áÐÜÞ áÐ XFree %s,\n"
-"·°¿°¼Â¸Âµ ÔÐ jÕ ÞÒÞ µºÁ¿µÀ¸¼µ½Â°»½A ßÞÔàèÚÐ ×Ð 3D Ø ÜÞÖÕ ÔÞÒÕáâØ ÔÞ "
-"ÑÛÞÚØàaúÐ àÐçãÝÐàÐ."
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s áÐ µºÁ¿µÀ¸¼µ½Â°»½¾¼ 3D åÐàÔÒÕàáÚÞÜ ÐÚæÕÛÕàÐæØjÞÜ"
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"²aèÐ ÚÐàâØæÐ ÜÞÖÕ ØÜÐâØ 3D åÐàÔÒÕàáÚã ÐÚæÕÛÕàÐæØjã ÐÛØ áÐÜÞ áÐ XFree %s,\n"
-"·°¿°¼Â¸Âµ ÔÐ jÕ ÞÒÞ µºÁ¿µÀ¸¼µ½Â°»½A ßÞÔàèÚÐ ×Ð 3D Ø ÜÞÖÕ ÔÞÒÕáâØ ÔÞ "
-"ÑÛÞÚØàaúÐ àÐçãÝÐàÐ.\n"
-"²aèã ÚÐàâØæã ßÞÔàÖÐÒa XFree %s ÚÞjØ ÜÞÖÕ ØÜaâØ ÑÞùã ßÞÔàèÚã Ø ×Ð 2D."
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (¸ÝáâÐÛÐæØja ÔØáßÛÕj ÔàÐjÒÕà)"
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr "XFree ÚÞÝäØÓãàÐæØøa"
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr "ºÞÛØçØÝÐ ÜÕÜÞàØøÕ ÝÐ ÓàÐäØçÚÞø ÚÐàâØæØ"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr "¾ßæØøÕ ×Ð áÕàÒÕà"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr "¸×ÐÑÕàØâÕ ÜÞÝØâÞà"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr "¼ÞÝØâÞà"
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"¼ÞàÐâÕ ÔÐ ÝÐÒÕÔÕâÕ åÞàØ×ÞÝâÐÛÝØ áØÝåàÞÝØ×ÐæØÞÝØ ÞßáÕÓ ÒÐèÕÓ ÜÞÝØâÞàÐ.\n"
-"¼ÞÖÕâÕ ÓÐ ØÛØ Ø×ÐÑàÐâØ Ø× ãÝÐßàÕÔ ×ÐÔÐâØå ÒàÕÔÝÞáâØ ÚÞøÕ ÞÔÓÞÒÐàÐøã\n"
-"ØÝÔãáâàØøáÚØÜ áâÐÝÔÐàÔØÜÐ ÜÞÝØâÞàÐ, ØÛØ ÔÐ ÝÐÒÕÔÕâÕ ÞÔàÕòÕÝØ ÞßáÕÓ.\n"
-"\n"
-"²µ¾¼° ¨µ ²°¶½¾ ÔÐ ÝÕ ÝÐÒÕÔÕâÕ âØß ÜÞÝØâÞàÐ ÚÞøØ ØÜÐ ÞÒÐø ÞßáÕÓ ÒÕûØ ÝÕÓÞ\n"
-"èâÞ ÓÐ ØÜÐ ÒÐè ÜÞÝØâÞà. °ÚÞ ÝØáâÕ áØÓãàÝØ, ÞÔÐÑÕàØâÕ ÜÐúÕ ÒàÕÔÝÞáâØ."
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr "ÅÞàØ×ÞÝâÐÛÝÐ äàÕÚÒÕÝæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr "²ÕàâØÚÐÛÝÐ äàÕÚÒÕÝæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr "¼ÞÝØâÞà ÝØøÕ ÚÞÝäØÓãàØáÐÝ"
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr "³àÐäØçÚÐ ÚÐàâÐ øÞè ÝØøÕ ÚÞÝäØÓãàØáÐÝÐ"
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr "ÀÕ×ÞÛãæØøÐ øÞè ÝØøÕ Ø×ÐÑàÐÝÐ"
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ âÕáâØàÐâÕ ÚÞÝäØÓãàÐæØøã?"
-
-#: ../../Xconfigurator.pm_.c:651
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr "ÃßÞ×ÞàÕúÕ: âÕáâØàÐúÕ ÞÒÕ ÓàÐäØçÚÕ ÚÐàâØæÕ ÜÞÖÕ ×ÐÜà×ÝãâØ Òaè ÚÞÜßjãâÕà"
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr "ÂÕáâØàÐúÕ ÚÞÝäØÓãàÐæØøÕ"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ßÞÚãèÐøâÕ áÐ ßàÞÜÕÝÞÜ ßÐàÐÜÕâÐàÐ"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr "ÅÜ, ÓàÕèÚÐ:"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "¸×ÛÐ× ×Ð %d áÕÚãÝÔØ"
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr "´Ð ÛØ øÕ ÞÒÞ ØáßàÐÒÝÞ ßÞÔeèÕÝÞ?"
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr "ÅÜ, ßÞøÐÒØÛÐ áÕ ÓàÕèÚÐ, ßàÞÑÐøâÕ ÔÐ ßàÞÜÕÝØâe ßÐàÐÜÕâàÕ"
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr "ÀÕ×ÞÛãæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr "¸×ÐÑÕàØâÕ àÕ×ÞÛãæØøã Ø ÑàÞø ÑÞøÐ ßàØ ßàØÚa×ã"
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr "³àÐäØçÚÐ ÚÐàâØæÐ: %s"
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 áÕàÒÕà: %s"
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "JÞè"
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr "Ã àÕÔã"
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "EÚáßÕàâ ÜÞÔ"
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr "¿àØÚÐÖØ áÒÕ"
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr "ÀÕ×ÞÛãæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "ÂØß âÐáâÐâãàÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "ÂØß ÜØèÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "¼Øè øÕ ßÞáâÐÒùÕÝ ÝÐ ãàÕòÐø: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¼ÞÝØâÞà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "¼ÞÝØâÞà - åÞàØ×ÞÝâÐÛÝa äàÕÚÒÕÝæØøÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "¼ÞÝØâÞà - ÒÕàâØÚÐÛÝÞ ÞáÒÕÖÐÒÐúÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "³àÐäØçÚÐ ÚÐàâØæÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr "¸ÔÕÝâØäØÚÐæØøÐ ÓàÐäØçÚÕ ÚÐàâØæÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "¼ÕÜÞàØøÐ ÝÐ ÓàÐäØçÚÞø ÚÐàâØæØ: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "±àÞø ÑÞøÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "ÀÕ×ÞÛãæØøÐ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 áÕàÒÕà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ÔàÐjÒÕà: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr "¿àÞÒÕàÐ ÚÞÝäØÓãàÐæØøÕ ×Ð X-Window áØáâÕÜ"
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr "ÈâÐ ÖÕÛØâÕ ÔÐ ãàÐÔØâÕ?"
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr "¿àÞÜÕÝÐ ÜÞÝØâÞàÐ"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr "¿àÞÜÕÝÐ ÓàÐäØçÚÕ ÚÐàâØæÕ"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr "¿àÞÜÕÝÐ ÁÕàÒÕà ÞßæØøÐ"
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr "¿àÞÜÕÝÐ àÕ×ÞÛãæØøÕ"
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr "¿àØÚÐÖØ ØÝäÞàÜÐæØøÕ"
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr "ÂÕáâØàÐø ßÞÝÞÒÞ"
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "ºàÐø"
-
-#: ../../Xconfigurator.pm_.c:1585
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"ÁÐçãÒÐø ßàÞÜÕÝÕ?\n"
-"ÂàÕÝãâÝÐ ÚÞÝäØÓãàÐæØja jÕ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr "X ÞÚàãÖÕúÕ ÝÐ áâÐàâã"
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Ja ÜÞÓã ßÞÔÕáâØ ÒÐè àÐçãÝÐà ÔÐ ÐãâÞÜÐâáÚØ ßÞÔØÖÕ X ÞÚàãÖÕúÕ ßàØ áâÐàâÐúã.\n"
-"´Ð ÛØ ÖÕÛØâÕ X ÞÚàãÖÕúÕ ßàØ àÕáâÐàâã ?"
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "¼ÞÛØÜ, ßÞÝÞÒÞ ãÝÕáØâÕ %s àÐÔØ ÐÚâØÒØàÐúÐ ßàÞÜÕÝÐ"
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "¼ÞÛØÜ ÒÐè Ø×ÛÞÓãøâÕ áÕ Ø àÕáâÐàâãøâÕ (Ctrl-Alt-BackSpace) àÐçãÝÐà"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ÑÞøÐ (8-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 åØùÐÔÕ ÑÞøÐ (15-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 åØùÐÔÐ ÑÞøÐ (16-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ÜØÛØÞÝÐ ÑÞøÐ (24-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ÜØÛØøÐàÔÕ ÑÞøÐ (32-ÑØâÝÐ ßÐÛÕâÐ)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ØÛØ ÒØèÕ"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "ÁâÐÝÔÐàÔÝØ VGA, 640x480 ÝÐ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "ÁãßÕà VGA, 800x600 ÝÐ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ÚÞÜßÐâ., 1024x768 ÝÐ 87 Hz áÐ ßàÕßÛØâÐúÕÜ (ÝÕ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "ÁãßÕà VGA, 1024x768 ÝÐ 87 Hz áÐ ßàÕßÛØâÐúÕÜ, 800x600 ÝÐ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ÝÐ 60 Hz, 640x480 ÝÐ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA ÑÕ× ßàÕßÛØâÐúÐ, 1024x768 ÝÐ 60 Hz, 800x600 ÝÐ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "²ØáÞÚÞäàÕÚÒÕÝâÝØ SVGA, 1024x768 ÝÐ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1280x1024 ÝÐ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1280x1024 ÝÐ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1280x1024 ÝÐ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1600x1200 ÝÐ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "¼ÞÝØâÞà ÚÞøØ àÐÔØ áÐ 1600x1200 ÝÐ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "¿àÒØ áÕÚâÞà áâÐàâÝÕ ßÐàâØæØøÕ"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "¿àÒØ áÕÚâÞà ÔØáÚÐ (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO ØÝáâÐÛÐæØøÐ"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "³ÔÕ ÑØáâÕ ÔÐ ØÝáâÐÛØàÐâÕ áâÐàâÕà?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub ØÝáâÐÛÐæØøÐ"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO áÐ âÕÚáâãÐÛÝØÜ ÜÕÝØjeÜ"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO áÐ ÓàÐäØçÚØÜ ÜÕÝØjÕÜ"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "ÁâÐàâaúÕ Ø× DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "³ÛÐÒÝÕ ÞßæØøÕ áâÐàâÕàa"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "ÁâÐàâÕà ÚÞjØ ûe áÕ ÚÞàØáâØâØ"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "¸ÝáâÐÛÐæØja áâÐàâÕàa"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "ÁâÐàâÝØ (boot) ãàÕòÐø"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ÝÕ àÐÔØ ÝÐ áâÐàØÜ BIOS-ØÜa)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "ºÞÜßÐÚâ"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "ÚÞÜßÐÚâ"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "²ØÔÕÞ ÜÞÔ"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "¿Ðã×Ð ßàÕ áâÐàâÐúÐ default image-Ð"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "»Þ×ØÝÚÐ"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr "»Þ×ØÝÚÐ (ßÞÝÞÒØâÕ)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "¾ÓàÐÝØçÕÝÐ ÚÞÜÐÝÔÝÐ ÛØÝØÚÐ - ÞßæØøÕ"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ÞÓàÐÝØçÕÝÞ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "¾çØáâØ /tmp ßàØ áÒÐÚÞÜ áâÐàâaúã"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "´ÕäØÝØèØ ÒÕÛØçØÝã RAM ÐÚÞ øÕ ßÞâàÕÑÝÞ (ÔÕâÕÚâÞÒÐÝÞ øÕ %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "¾ÜÞÓãûØ ÜãÛâØ-ßàÞäØÛÕ"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "¿àØÚÐÖØ ÒÕÛØçØÝã RAM-Ð ã Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"¾ßæØøÐ``¾ÓàÐÝØçÕÝÐ ÚÞÜÐÝÔÝÐ ÛØÝØÚÐ - ÞßæØøÕ'' øÕ ÝÕãßÞâàÕÑùØÒÐ ÑÕ× ÛÞ×ØÝÚÕ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr "¿àÞÑÐøâÕ ßÞÝÞÒÞ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr "½ÕßÞÔãÔÐàÝÞáâ ÛÞ×ØÝÚØ"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "¸ÝØæØjÐÛÝÐ ßÞàãÚa"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "¾âßÞçÝØ Firmware ßÐã×ã"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "¿Ðã×Ð ßàØ áâÐàâaúã ÚÕàÝÕÛa"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "¾ÜÞÓãûØ áâÐàâaúÕ áÐ CD-a?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "¾ÜÞÓãûØ OF áâÐàâaúÕ?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "¿ÞÔàÐ×ãÜÕÒÐÝØ ¾Á ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"¾ÒÞ áã ßÞáâÐÒùÝÕ ÞßæØøÕ.\n"
-"¼ÞÖÕâÕ ÔÞÔÐâØ ÝÞÒÕ ØÛØ Ø×ÜÕÝØâØ áâÐàÕ."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr "´ÞÔÐø"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "ÃàÐòÕÝÞ"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "¿àÞÜÕÝØ"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ºÞøã Òàáâã ãÝÞáa ÔÞÔÐjÕâe ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "´àãÓØ ¾Á-ÞÒØ (SunOS,BSD,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "´àãÓØ ¾Á-ÞÒØ (MacOS,BSD,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "´àãÓØ ¾Á-ÞÒØ (Windows,BSD,BeOS,...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "ÁÛØÚÐ"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "´ÞÔÐâaÚ"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "ÇØâÐúÕ-ßØáÐúÕ RW"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "ÂÐÑÕÛÐ"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "½ÕáØÓãàÝÞ"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "¾×ÝÐÚÐ"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "¿ÞÔàÐ×ãÜÕÒÐÝÞ"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-ÒÕÛØçØÝa"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "ÃÚÛÐúÐÜ ãÝÞá"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "¿àÐ×ÝÐ Þ×ÝÐÚÐ ÝØøÕ ÔÞ×ÒÞùÕÝÐ"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "¼ÞàÐâÕ áßÕæØäØæØàÐâØ ÚÕàÝÕÛÞÒ image"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "¼ÞàÐâÕ ÞÔàÕÔØâØ root ßÐàâØæØøã"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "¾ÒÐ Þ×ÝÐÚÐ øÕ ÒÕû ã ãßÞâàÕÑØ"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "¿àÞÝÐòÕÝÞ  %s %s ØÝâÕàäÕøáa"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "´Ð ÛØ ØÜÐâÕ øÞè øÕÔÐÝ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¸ÜÐâÕ ÛØ øÞè %s ØÝâÕàäÕøáÐ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr "½Õ"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr "´Ð"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "¿ÞÓÛÕÔÐø ØÝäÞàÜÐæØøÕ Þ åÐàÔÒÕàã"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "¸ÝáâÐÛØàÐÜ ÔàÐøÒÕà ×Ð %s ÚÐàâØæã %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(ÜÞÔãÛ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ºÞøØ %s ÔàÐøÒÕà ÔÐ ßàÞÑÐÜ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"à ÝÕÚØÜ áÛãçÐøÕÒØÜÐ, ÔàÐøÒÕà %s ×ÐåâÕÒÐ ÔÞÔÐâÝÕ ØÝäÞàÜÐæØøÕ\n"
-"×Ð ßàÐÒØÛÐÝ àÐÔ, ÜÐÔÐ ÜÞÖÕ ÛÕßÞ ÔÐ àÐÔØ Ø ÑÕ× úØå. ´Ð ÛØ åÞûÕâÕ\n"
-"áÐÜØ ÔÐ ãÝÕáÕâÕ ÔÞÔÐâÝÕ ßÞÔÐâÚÕ ×Ð úÕÓÐ, ØÛØ ÔÐ Øå ÔàÐøÒÕà áÐÜ ÞÔàÕÔØ?\n"
-"¼ÞÓãûÕ øÕ ÔÐ ûÕ ßàÞÑÐ ×ÐÓÛÐÒØâØ ÒÐè àÐçãÝÐà, ÐÛØ ÝÕûÕ ÝÐÝÕâØ ÝØÚÐÚÒã èâÕâã."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "°ãâÞÜÐâáÚÐ ßàÞÑÐ"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "½ÐÒÕÔØâÕ ÞßæØøÕ"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"¼ÞÖÕâÕ ÝÐÒÕáâØ úÕÓÞÒÕ ÞßæØøÕ ×Ð ÜÞÔãÛ %s.\n"
-"¾ßæØøÕ áã ã äÞàÜÐâã ``ØÜÕ=ÒàÕÔÝÞáâ ØÜÕ2=ÒàÕÔÝÞáâ2 ...''.\n"
-"½Ð ßàØÜÕà, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "¾ßæØøÕ ÜÞÔãÛÐ:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"¿ÞÔØ×ÐúÕ ÜÞÔãÛÐ %s ÝÕãáßÕÛÞ.\n"
-"´Ð ÛØ ÖÕÛØâÕ ßÞÚãèÐâÕ ßÞÝÞÒÞ áÐ ÔàãÓØÜ ßÐàÐÜÕâàØÜÐ ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "ßàØáâãß X ßàÞÓàÐÜØÜÐ"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "ßàØáâãß rpm ÐÛÐâØÜÐ"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "ÔÞ×ÒÞÛØ \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "ßàØáâãß ÐÔÜØÝØáâàÐâØÒÝØÜ äÐøÛÞÒØÜÐ"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ÒÕû ßÞáâÞøØ)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "¾ÒÐ ÛÞ×ØÝÚÐ øÕ ßàÕÒØèÕ ßàÞáâÐ"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "¾ÔàÕÔØâÕ ÚÞàØáÝØçÚÞ ØÜÕ"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "ºÞàØáÝØçÚÞ ØÜÕ ÜÞÖÕ áÐÔàÖÐâØ áÐÜÞ ÜÐÛÐ áÛÞÒÐ, ÑàÞøÕÒÕ, `-' Ø `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "¾ÒÞ ÚÞàØáÝØçÚÞ ØÜÕ ÒÕû ßÞáâÞøØ"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "´ÞÔÐø ÚÞàØáÝØÚÐ"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ÃÝÕáØ ÚÞàØáÝØÚÐ\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "¿àØåÒÐâØ ÚÞàØáÝØÚÐ"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "¿àÐÒÞ ØÜÕ"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr "ºÞàØáÝØçÚÞ ØÜÕ"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "¸ÚÞÝa"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "°ãâÞ ÛÞÓÞÒaúe"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ja ÜÞÓã ßÞÔÕáâØ ÒÐè àÐçãÝÐà ÔÐ ÐãâÞÜÐâáÚØ ãÛÞÓãje jeÔÝÞÓ ÚÞàØáÝØÚa.\n"
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ÚÞàØáØâØâÕ ÞÒã ÞßæØøã ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "¸×ÐÑÕàØâÕ default (ÞáÝÞÒÝÞÓ) ÚÞàØáÝØÚa:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "¸×ÐÑÕàØâÕ window ÜÕÝÐÔ×Õà ÚÞjØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "¸·ÐÑÕàØâÕ ÚÞjØ jÕ×ØÚ ÖÕÛØâÕ ÔÐ ÚÞàØáØâØâÕ."
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "¼ÞÖÕâÕ Ø×ÐÑàÐâØ ÔàãÓØ jÕ×ØÚ ÚÞjØ ûÕ ÑØâØ ÔÞáâãßÐÝ ßÞáÛÕ ØÝáâÐÛÐæØje "
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr "ÁÒe"
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr "´Þ×ÒÞÛØ áÒÕ ÚÞàØáÝØÚÕ"
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr "¸×ÑÞà ßÞ ÖeùØ"
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr "½ÕÜÐ ×ÐøÕÔÝØçÚÞÓ ÔÕùÕúÐ"
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "¿ÐÚÕâ %s ÜÞàÐ ÑØâØ ØÝáâÐÛØàÐÝ. ´Ð ÛØ ÖÕÛØâÕ ÔÐ ÓÐ ØÝáâÐÛØàÐâÕ?"
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "¼ÞÖÕâÕ ÕÚáßÞàâÞÒÐâØ ÚÞàØáâÕûØ NFS ØÛØ Samba-ã. ºÞøØ ÞÔ ÞÒÐ ÔÒÐ ÖÕÛØâÕ"
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "ÂÕÚãûØ ßÐÚÕâ %s ÝÕÔÞáâÐøÕ"
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "¿ÞÝØèâØ"
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr "´ÞÑàÞèÛØ ÚÞÔ KàÐÚÕàa"
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr "±ÕÔÝÐ"
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "ÁâÐÝÔÐàÔÝØ"
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr "²ÕÛØÚÐ"
-
-#: ../../any.pm_.c:1041
-#, fuzzy
-msgid "Higher"
-msgstr "²ÕÛØÚÐ"
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr "¿ÐàÐÝÞØÔÝÐ"
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"½Ð ÞÒÞÜ ÝØÒÞã âàÕÑÐ ÞÑàÐâØâØ ßÐÖúã. ¾Ý ßàÐÒØ ÒÐè áØáâÕÜ ÛÐÚèØÜ\n"
-"×Ð ãßÞâàÕÑã, ÐÛØ Ø  ÒÕÞÜÐ ÞáÕâùØÒØÜ: ÝÕ áÜÕ ÑØâØ ÚÞàØèâÕÝ ÝÐ ÜÐèØÝØ\n"
-"ÚÞøÐ øÕ ßÞÒÕ×ÐÝÐ áÐ ÔàãÓØÜ ÜÐèØÝÐÜÐ ØÛØ ÝÐ ØÝâÕàÝÕâ. ¾ÒÔÕ ÝÕ ßÞáâÞøØ\n"
-"ßàØáâãß áÐ ÛÞ×ØÝÚÞÜ."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"»Þ×ØÝÚÕ áã áÐÔÐ ÞÜÞÓãûÕÝÕ, ÐÛØ áe Ø ÔÐùÕ ÝÕ ßàÕßÞàãçãøÕ ÔÐ áÕ ÚÞàØáâØ\n"
-"ÚÐÞ ÜàÕÖÝØ àÐçãÝÐà."
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"¾ÒÞ øÕ áâÐÝÔÐàÔÝÞ áØÓãàÝÞáÝÞ ÞÚàãÖÕúÕ ßàÕßÞàãçÕÝÞ ×Ð àÐçãÝÐàÕ\n"
-"ÚÞjØ  ûÕ ÑØâØ  ÚÞàèûÕÝØ ×Ð ÒÕ×ã áÐ ¸ÝâÕàÝÕâÞÜ ØÛØ ÚÐÞ ÚÛØøÕÝâ.\n"
-"½e ßÞáâÞøÕ áØÓãàÝÞáÝÕ ßàÞÒÕàÕ."
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1051
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"ÁÐ ÞÒØÜ áØÓãàÝÞáÝØÜ ÝØÒÞÞÜ, ÚÞàØèûÕúÕ ÞÒÞÓ áØáâÕÜÐ ÚÐÞ áÕàÒÕàÐ\n"
-"ßÞáâÐøÕ ÜÞÓãûÕ. ÁØÓãàÝÞáâ øÕ áÐÔÐ ÔÞÒÞùÝÞ ÒÕÛØÚÐ ×Ð ÚÞàØèûÕúÕ\n"
-"ÜÐèØÝÕ ×Ð áÕàÒÕà ÚÞøØ ßàØåÒÐâÐ ÚÞÝÕÚæØøÕ ÑàÞøÝØå ÚÛØøÕÝÐâÐ."
-
-#: ../../any.pm_.c:1054
-#, fuzzy
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"ÃÚùãçãøÕâÕ ÝØÒÞ 4 ÞßæØøÐ, ÐÛØ øÕ áÐÔÐ áØáâÕÜ ßÞâßãÝÞ ×ÐâÒÞàÕÝ.\n"
-"ÁØÓãàÝÞáÝÕ ÞßæØøÕ áã ÜÐÚáØÜÐÛÝÕ."
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr "¸×ÐÑÕàØâÕ áØÓãàÝÞáÝØ ÝØÒÞ"
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr "ÁØÓãàÝÞáÝØ ÝØÒÞ"
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr "ºÞàØáâØ libsafe ×Ð áÕàÒÕàÕ"
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "±ØÑÛØÞâÕÚÐ ÚÞøÐ èâØâØ ÞÔ buffer overflow-Ð Ø format string ÝÐßÐÔÐ."
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobrodosli u %s, menadzer zÐ startanje operativnih sistema !\n"
-"\n"
-"Izaberite operativni sistem, ili\n"
-"sacekate %d sekundi za startanje pretpostavljenog OS.\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobrodosli u GRUB  starter operativnog sistema !"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristi  %c i %c slova da bi oznacili izbor"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi pri  podizanju sistema,ili  'c' za komandnu liniju "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceni izbor se podize automatski za %d sekundi"
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr "ÝÕÜÐ ÔÞÒÞùÝÞ ÜÕáâÐ ã /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr "´ÕáÚâÞß"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr "ÁâÐàâ ÜÕÝØ "
-
-#: ../../bootloader.pm_.c:1047
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "½Õ ÜÞÖÕâÕ ÔÐ ØÝáâÐÛØàÐâÕ áâÐàâÕà ÝÐ ßÐàâØæØøã %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ßÞÜÞû jÞè ÝØjÕ ØÜßÛÕÜÕÝâØàÐÝÐ.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "KÞÝäØÓãàÐæØøa áâØÛÐ áâÐàâaúa"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_ÄÐjÛ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/ÄÐjÛ/_ºàÐj"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle ¼ÞÝØâÞà ×Ð ÚÐâÕÓÞàØ×ÐæØjã"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle ¼ÞÝØâÞà"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ÂàÐÔØæØÞÝÐÛÝØ ¼ÞÝØâÞà"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ÂàÐÔØæØÞÝÐÛÝØ Gtk+ ¼ÞÝØâÞà"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "¿ÞÚàÕÝØ °ãàÞàã ßàØ áâÐàâaúe"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub ÜÞÔ"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot ÜÞÔ"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÂàÕÝãâÝÞ ÚÞàØáâØâÕ %s ÚÐÞ Boot ÜÕÝÐÿÕà \n"
-"ºÛØÚÝØâÕ ÝÐ ¿ÞÔÕáØ (Configure) ÔÐ ÑØ ßÞÚàÕÝãÛØ ßÞÔeèÐÒÐÒÐúÕ."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "¿ÞÔÕáØ"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "ÁØáâÕÜáÚØ ÜÞÔ"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr "¿ÞÚàÕÝØ X-Window áØáâÕÜ ßàØ áâàÐâaúã"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "½Õ, ja ÝÕ ÖÕÛØÜ ÐãâÞÛÞÓÞÒaúe"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "´Ð, jÐ ÖÕÛØÜ ÐãâÞÛÞÓÞÒaúe áÐ ÞÒØÜ(ÚÞàØáÝØÚ,ÔÕáÚâÞß)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr "¾K"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÝÕ ÜÞÓã ÞâÒÞàØâØ /etc/inittab ×Ð çØâaúe: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ÜØÝãâa"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ÜØÝãâ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d áÕÚãÝÔØ"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "½Õ ÜÞÓã ÔÐ ÝÐßàÐÒØÜ áÝØÜÐÚ ßàÕ ßÐàâØæØÞÝØàÐúÐ"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "ÁÝØÜæØ ûÕ ÑØâØ ÔÞáâãßÝØ ÝÐÚÞÝ ØÝáâÐÛÐæØøÕ ã %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr "ÄàÐÝæãáÚa"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "ºÞáâÐàØÚÐ"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr "±ÕÛÓØøÐ"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "ÇÕèÚÐ"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "½ÕÜÐçÚa"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "³àçÚÐ"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "½ÞàÒÕèÚÐ"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "ÈÒÕÔáÚÐ"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr "ÅÞÛÐÝÔØøÐ"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr "¸âÐÛØøÐ"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "°ãáâàØøÐ"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr "Á°´"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "¼ÞÛØÜ ÒÐá, ßàÒÞ ÝÐßàÐÒØâÕ ÚÞßØøã ÒÐèØå ßÞÔÐâÐÚÐ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr "¿°¶©¸²¾ ¿À¾Ç¸Â°¨ !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"ÃÚÞÛØÚÞ ßÛÐÝØàÐâÕ ÔÐ ÚÞàØáâØâÕ  aboot, ÞáâÐÒØâe ßàÐ×ÐÝ ßàÞáâÞà (2048 "
-"áÕÚâÞàÐÝÐ ßÞçÕâÚã \n"
-"ÔØáÚÐ)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "³àÕèÚÐ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "çÐàÞÑúÐÚ (ßÞÜÞûÝØÚ)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "¸×ÐÑÕàØâÕ ÐÚæØøã"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"´ØáÚ áÐÔàÖØ øÕÔÝã ÒÕÛØÚã FAT ßÐàâØæØøã\n"
-"(ãÓÛÐÒÝÞÜ øÕ ÚÞàØáâÕ MicroSoft Dos/Windows-Ø, ÝÐ ÖÐÛÞáâ).\n"
-"¿àÕÔÛÐÖÕÜ ÔÐ ßàÒÞ Ø×ÜÕÝØâÕ ÒÕÛØçÝã (resize) âÕ ßÐàâØæØøÕ (ÚÛØÚÝØâÕ ÝÐ úã,\n"
-"Ð ßÞâÞÜ ÝÐ \"¿àÞÜÕÝØ ÒÕÛØçØÝã\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "ºÛØÚÝØâÕ ÝÐ ßÐàâØæØøã"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "´ÕâÐùØ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr "¿àÐ×ÝÞ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr "´àãÓÞ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "²àáâÐ äÐøÛ áØáâÕÜÐ:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "ºàÕØàÐø"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "ÂØß"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ÃÜÕáâÞ âÞÓÐ ßàÞÑÐøâÕ ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "¾ÑàØèØ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "¿àÒÞ ãàÐÔØâÕ ``´ÕÜÞÝâØàÐø''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"¿ÞáÛÕ ßàÞÜÕÝÕ âØßÐ ßÐàâØæØje %s, áÒØ ßÞÔÐæØ ÝÐ ÞÒÞø ßÐàâØæØøØ ûÕ ÑØâØ "
-"Ø×ÑàØáÐÝØ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "¸×ÐÑÕàØâÕ ßÐàâØæØøã"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "¸×ÐÑÕàØâÕ ÔàãÓã ßÐàâØæØøã"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "¸×ÛÐ×"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "¿àÕòØ ÝÐ ÕÚáßÕàâ ÜÞÔ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "¿àÕòØ ÝÐ ÝÞàÜÐÛÝØ ÜÞÔ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "¿ÞÝØèâØ àÐÔúã"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "ÁÒÕøÕÔÝÞ ÝÐáâÐÒØâØ ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "ºàÐø ÑÕ× áÝØÜÐúÐ ßàÞÜÕÝÐ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "ºàÐø ÑÕ× áÝØÜÐúÐ ßàÞÜÕÝÐ ã âÐÑÕÛÕ ßÐàâØæØøÐ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ áÐçãÒÐâÕ Ø×ÜÕÝÕ ã /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "°ãâÞ ÔØáÛÞæØàÐúÕ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "¾çØáâØ áÒÕ"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "¸ÝäÞàÜÐæØøÕ Þ åÐàÔ ÔØáÚã"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "ÁÒÕ ßàØÜÐàÝÕ ßÐàâØæØøÕ áã ×Ðã×ÕâÕ"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "½Õ ÜÞÓã ÔÞÔÐâØ ÒØèÕ ÝØ øÕÔÝã ßÐàâØæØøã"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"´Ð ÑØ ÞÜÞÓãûØÛØ ÚàÕØàÐúÕ øÞè (extended) ßÐàâØæØøÐ Ø×ÑàØèØâÕ øÕÔÝã ÞÔ "
-"ßÞáâÞøÕûØå"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "ÁÐçãÒÐø âÐÑÕÛã ßÐàâØæØøÐ"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "¾ÑÝÞÒØ âÐÑÕÛã ßÐàâØæØøÐ"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "ÁßÐáØ âÐÑÕÛã ßÐàâØæØøÐ"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "¿ÞÝÞÒÞ ãçØâÐø âÐÑÕÛã ßÐàâØæØøÐ"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "°ãâÞÜÞÝâØàÐúÕ ßàÕÝÞáØÒÞÓ ÜÕÔØøÐ"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "¸×ÐÑÕàØâÕ ÔÐâÞâÕÚã"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"¿ÞåàaúÕÝa(áÝØÜùÕÝÐ) âÐÑÕÛÐ ßÐàâØæØøÐ ÝØøÕ ØáâÕ ÒÕÛØçØÝÕ\n"
-"¶ÕÛØâÕ ÔÐ ÝÐáâÐÒØâÕ ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "ÃßÞ×ÞàÕúÕ"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"ÃÑÐæØâÕ ÔØáÚÕâã ã ãàÕòÐø\n"
-"ÁÒØ ßÞÔÐæØ ÝÐ ÔØáÚÕâØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ !"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "ÁßÐáÐÒÐúÕ âÐÑÕÛÕ ßÐàâØæØøÐ"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "´ÕâÐùÝÕ ØÝäÞàÜÐæØøÕ"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "ÂÐçÚÐ ÜÞÝâØàÐúÐ"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "¾ßæØje"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr "¿àÞÜÕÝØ ÒÕÛØçØÝã"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr "¿àÕÜÕáâØ"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "ÄÞàÜÐâØàÐúÕ"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "¼ÞÝâØàÐø"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "´ÞÔÐø ÝÐ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "´ÞÔÐø ÝÐ LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "´ÕÜÞÝâØàÐø"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "ÃÚÛÞÝØ áÐ RAID-Ð"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "ÃÚÛÞÝØ áÐ LVM-Ð"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "¿àÞÜÕÝØ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "ºÞàØáâØ ×Ð loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "ºàÕØàÐø ÝÞÒã ßÐàâØæØøã"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "¿ÞçÕâÝØ áÕÚâÞà: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr "²ÕÛØçØÝÐ ã MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr "²àáâÐ âÐâÞâeçÝÞg áØáâÕÜÐ:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr "ÂÐçÚÐ ÜÞÝâØàÐúÐ: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "ºÐàÐÚâÕàØáâØÚÕ: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "ÃÚÛÞÝØ loopback äÐøÛ ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "¿àÞÜÕÝÐ âØßÐ ßÐàâØæØøÕ"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "ºÞøã  ÔÐâÞâÕçÝØ áØáâÕÜ ÖÕÛØâÕ ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "¼ÕúÐÜ ext2 ÝÐ ext3"
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "³ÔÕ ÑØáâÕ ÔÐ ÜÞÝâØàÐâÕ loopback ÔÐâÞâÕÚã  %s?"
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "³ÔÕ ÑØáâÕ ÔÐ ÜÞÝâØàÐâÕ %s ãàÕòÐø ?"
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"´ÕÜÞÝâØàaúe ÝØjÕ ÜÞÓãûÕ,jÕà áÕ ßÐàâØæØjÐ ÚÞàØáØâØ ×Ð loop back.\n"
-"¿àÒÞ ãÚÛÞÝØâÕ loopback"
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr "¿àÞàÐçãÝÐÒÐÜ ÓàÐÝØæÕ FAT ÔÐâÞâeçÝÞÓ áØáâÕÜÐ"
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "¿àÞÜÕÝÐ ÒÕÛØçØÝÕ (resizing)"
-
-#: ../../diskdrake/interactive.pm_.c:617
-msgid "This partition is not resizeable"
-msgstr "¾ÒÞj ßÐàâØæØæØ ÝØjÕ ÜÞÓãûe ßàÞÜÕÝØâØ ÒÕÛØçØÝã"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr "CÒØ ßÞÔÐæØ ÝÐ ÞÒÞø ßÐàâØæØøØ ÑØ âàÕÑÐÛØ ÑØâØ áaçãÒÐÝØ"
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "¿ÞáÛÕ ßàÞÜÕÝÕ ÒÕÛØçØÝe %s ßÐàâØæØjÕ áÒØ ßÞÔÐæØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ"
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr "¸×ÐÑÕàØâÕ ÝÞÒã ÒÕÛØçØÝã"
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr "½ÞÒÐ ÒÕÛØçØÝÐ ã MB:"
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr "ºÞøØ ÔØáÚ ÖÕÛØâÕ ÔÐ ßàÕÜÕáâØâÕ?"
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr "ÁÕÚâÞà"
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr "³ÔÕ ÖÕÛØâe ÔÐ ØÝáâÐÛØàÐâÕ áâÐàâÕà?"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr "¿àÕÜÕèâÐúÕ"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr "¿àÕÜÕèâÐúÕ ßÐàâØæØøÕ..."
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr "¸×ÐÑÕàØ ßÞáâÞøÕûØ RAID ×Ð ÔÞÔÐÒÐúÕ"
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr "ÝÞÒØ"
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr "¸×ÐÑÕàØ ßÞáâÞøÕûØ LVM ×Ð ÔÞÔÐÒÐúÕ"
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr "LVM ØÜÕ?"
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr "¾ÒÐ ßÐàâØæØøÐ ÝÕ ÜÞÖÕ ÑØâØ ÚÞàØèûÕÝÐ ×Ð loopback "
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr "¸ÜÕ Loopback ÔÐâÞâÕÚe: "
-
-#: ../../diskdrake/interactive.pm_.c:785
-msgid "Give a file name"
-msgstr "¾ÔàÕÔØâÕ ØÜÕ äÐøÛÐ"
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr "ÄÐjÛ áÕ ÒÕû ÚÞàØáâØ ÞÔ áâàÐÝÕ ÔàãÓÞÓ loopback-Ð,Ø×ÐÑÕàØâÕ ÔàãÓØ"
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr "´ÐâÞâÕÚa ÒÕû ßÞáâÞøØ.´Ð ÛØ ÔÐ ÓÐ ÚÞàØáâØÜ ?"
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr "¾ßæØøÕ ÜÞÝâØàÐúÐ"
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr "ÀÐ×ÝÞ"
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr "ãàeòÐj"
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr "ÝØÒÞ"
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr "chunk ÒÕÛØçØÝÐ"
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr "¿°¶©¸²¾,ÞÒÐ ÞßÕàÐæØøÐ jÕ ÞßÐáÝÐ."
-
-#: ../../diskdrake/interactive.pm_.c:914
-msgid "What type of partitioning?"
-msgstr "ºÞøã Òàáâã ßÐàâØæØÞÝØàaúa?"
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"½ØøÕ ÜÞÓãûÕ ÚàÕØàÐâØ /boot ×Ð áÐÔÐ ÝÐ åÐàÔ ÔØáÚã (ÝÐ æØÛØÝÔàã > 1024).\n"
-"¸ÛØ ÚÞàØáâØâÕ LILO ÚÞøØ ÝÕ àÐÔØ, ØÛØ ÓÐ ÝÕ ÚÞàØáâØâÕ ßÐ ÒÐÜ ÝÕ âàÕÑÐ /boot"
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"¿ÐàâØæØøÐ ÚÞøã áâÕ Ø×ÐÑàÐÛØ ×Ð root (/) øÕ äØ×ØçÚØ ÛÞæØàÐÝÐ Ø×ÝÐÔ\n"
-"1024-âÞÓ æØÛØÝÔàÐ åÐàÔ ÔØáÚÐ,Ø ÝÕÜÐâÕ /boot ßÐàâØæØøã.\n"
-"ÃÚÞÛØÚÞ ßÛÐÝØàÐâÕ ÔÐ ÚÞàØáØâØâÕ LILO boot ÜÕÝÐÔÖÕà, ÜÞàÐâÕ\n"
-"ÔÞÔÐâØ /boot ßÐàâØæØøØ."
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"¸×ÐÑàÐÛØ áâÕ áÞäâÒÕàáÚã RAID ßÐàâØæØjã ÚÐÞ root (/).\n"
-"½ØjÕÔÐÝ áâÐàâÕà ÝÕ ÜÞÖÕ ÔÐ àÐÔØ áÐ âØÜ ÑÕ× /boot ßÐàâØæØje.\n"
-"·ÐâÞ ßÐ×ØâÕ Ôa ÔÞÔÐâÕ /boot ßÐàâØæØjã"
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ÂÐÑÕÛÐ ßÐàâØæØøÐ ×Ð ãàÕòÐø %s ûÕ ÑØâØ ×ÐßØáÐÝÐ ÝÐ ÔØáÚ!"
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr "¼ÞàÐâÕ àÕáâÐàâÞÒÐâØ àÐçãÝÐà ÔÐ ÑØ áÕ Ø×ÜÕÝÕ Ø×ÒàèØÛÕ"
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"¿ÞáÛÕ äÞàÜÐâØàaúa ßÐàâØæØje %s,áÒØ ßÞÔÐæØ ÝÐ ÞÒÞø ßÐàâØæØøØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ"
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr "ÄÞàÜÐâØàÐúÕ"
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "ÄÞàÜÐâØàÐúÕ loopback ÔÐâÞâÕÚe %s"
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "ÄÞàÜÐâØàÐúÕ ßÐàâØæØøÕ %s"
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Hide files"
-msgstr "ÁÐÚàØø äÐøÛÞÒÕ"
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Move files to the new partition"
-msgstr "¿àÕÜÕáâØ äÐøÛÞÒÕ ÝÐ ÝÞÒã ßÐàâØæØøã"
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"´ØàÕÚâÞàØøãÜ %s ÒÕû áÐÔàÖØ ÝÕÚÕ ßÞÔÐâÚÕ\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-msgid "Moving files to the new partition"
-msgstr "¿àÕÜÕèâÐúÕ äÐøÛÞÒÐ ÝÐ ÝÞÒã ßÐàâØæØøã"
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr "ºÞßØàÐúÕ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, c-format
-msgid "Removing %s"
-msgstr "ÃÚÛÐúÐúÕ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "ßÐàâØæØøÐ %s øÕ áÐÔÐ ßÞ×ÝÐâÐ ÚÐÞ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr "ÃàÕòÐø: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "¾×ÝÐÚÐ DOS ßÐàâØæØøÕ: %s (áÐÜÞ ßàÕâßÞáâÐÒÚÐ)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr "ÃÝÕáØ: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr "¸ÜÕ: "
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "¿ÞçÕâÐÚ: áÕÚâÞà %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr "²ÕÛØçØÝÐ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s áÕÚâÞàÐ"
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "ÆØÛØÝÔÐà %d ÔÞ æØÛØÝÔàÐ %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr "ÄÞàÜÐâØàÐÝÞ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr "½ØøÕ äÞàÜÐâØàÐÝÞ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr "¼ÞÝâØàÐÝÞ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback äÐjÛ(ÞÒØ): \n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Boot ßÐàâØæØøÐ ßÞ default-ã\n"
-"   (×Ð ßÞÔØ×ÐúÕ MS-DOSÐ, ÝÕ ×Ð lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr "½ØÒÞ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-ãø %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-ÔØáÚÞÒØ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "¸Üe Loopback ÔÐâÞâÕÚe: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"½ÐjÒÕàÞÒÐâÝØjÕ je, ÔÐ jÕ ÞÒÐ ßÐàâØæØja\n"
-"Driver ßÐàâØæØja, ßÐ ÝÕÑØ âàÕÑÐÛØ\n"
-"ÔÐ jÕ ÔØàÐâe.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"¾ÒÞ jÕ áßÕæØjÐÛÝÐ Bootstrap\n"
-"ßÐàâØæØjÐ Ø ÚÞàØáâØ áe\n"
-"dual-booting ÒaèÕÓ áØáâÕÜa.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr "²ÕÛØçØÝÐ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "³ÕÞÜÕâàØøÐ: %s æØÛØÝÔÐàÐ, %s ÓÛÐÒÐ, %s áÕÚâÞàÐ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr "¸ÝäÞ: "
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-ÔØáÚÞÒØ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ÂØß âÐÑÕÛe ßÐàâØæØøÐ : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ÝÐ Ñãáã %d ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, c-format
-msgid "Options: %s"
-msgstr "¾ßæØje: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Filesystem encryption key"
-msgstr "ºùãç ×Ð ÕÝÚàØßæØøã äÐøÛ áØáâÕÜÐ"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr "¸×ÐÑÕàØâÕ Úùãç ×Ð ÕÝÚàØßæØøã äÐøÛ áØáâÕÜÐ"
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"¾ÒÐ ÛÞ×ØÝÚÐ(ÕÝÚàØßæØÞÝØ Úùãç) jÕ áãÒØèe jÕÔÝÞáâÐÒÝa (âàÕÑÐ Ôa ØÜÐ ÑÐà %d "
-"×ÝÐÚÞÒÐ)"
-
-#: ../../diskdrake/interactive.pm_.c:1143
-msgid "The encryption keys do not match"
-msgstr "½ÕßÞÔãÔÐàÝÞáâ ÕÝÚàØßæØÞÝØå ÚùãçÕÒÐ (ÛÞ×ØÝÚØ)"
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr "ºùãç ×Ð ÕÝÚàØßæØøã"
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr "ºùãç ×Ð ÕÝÚàØßæØøã (ßÞÝÞÒÞ)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "¿àÞÜÕÝÐ âØßÐ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a medium"
-msgstr "ºÛØÚÝØâÕ ÝÐ ÜÕÔØø"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS áÕàÒÕà"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ÄÞàÜÐâØàÐúÕ  %s ÝØøÕ ãáßÕÛÞ"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ÝÕ ×ÝÐÜ ÚÐÚÞ ÔÐ äÞàÜÐâØàÐÜ %s ã âØßã %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ßàÞÒÕàÐ ÝØøÕ ãáßÕÛÐ áÐ ÚÞÔÞÜ %d ØÛØ áØÓÝÐÛÞÜ %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "³àÕèÚÐ ßàØ ÔÕÜÞÝâØàÐúã %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jÕÔÝÞáâÐÒÝÞ"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "áÕàÒÕà"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "½e ÜÞÖÕâÕ ÚÞàØáâØâØ JFS ×Ð ßÐàâØæØjÕ ÜÐúÕ ÞÔ 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "½e ÜÞÖÕâÕ ÚÞàØáâØâØ ReiserFS ×Ð ßÐàâØæØjÕ ÜÐúÕ ÞÔ 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "ÂÐçÚÕ ÜÞÝâØàÐúÐ ÜÞàÐøã ÔÐ ßÞçØúã áÐ ÒÞÔÕûØÜ /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "²Õû ßÞáâÞøØ ßÐàâØæØøÐ áÐ âÐçÚÞÜ ÜÞÝâØàÐúÐ %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "½Õ ÜÞÖÕâÕ ÚÞàØáâØâØ ÛÞÓØçÚã LVM ßÐàâØæØjã ×Ð âaçÚã ÜÞÝâØàaúÐ %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "¾ÒÐj ÔØàÕÚâÞàØjãÜ âàÕÑÐ ÔÐ ÞáâÐÝÕ ã root-ã  ÔÐâÞâeçÝÞÓ áØáâÕÜa"
-
-#: ../../fsedit.pm_.c:486
-#, fuzzy
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"¿ÞâàÕÑÐÝ ÒÐÜ jÕ ßàÐÒØ ÔÐâÞâeçÝØ áØáâÕÜ (ext2, reiserfs) ×Ð ÞÒã âaçÚã "
-"ÜÞÝâØàÐúa\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "½Õ ÜÞÖÕâÕ ÚÞàØáâØâØ ÕÝÚàØßâÞÒÐÝØ äÐøÛ áØáâÕÜ ×Ð âaçÚã ÜÞÝâØàaúÐ %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ ×Ð ÐãâÞ-ÐÛÞæØàaúÕ"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "½ÕÜÐ èâÐ ÔÐ áÕ ãàÐÔØ"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "³àÕèÚÐ ßàØ ÞâÒÐàÐúã %s ×Ð ØáßØá: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"´ÞÓÞÔØÛÐ áÕ ÓàÕèÚÐ - ÝØøÕ ÝÐòÕÝ ØáßàÐÒÐÝ ãàÕòÐø ÝÐ ÚÞøÕÜ ÑØ ÑØÛØ ÚàÕàÐÝØ "
-"ÝÞÒØ ÔÐâÞâeçÝÞÓ áØáâÕÜØ. ¿àÞÒÕàØâÕ ÒÐè åÐàÔÒÕà ÔÐ ÒØÔØâÕ èâÐ øÕ ã×àÞÚ ÞÒÞÓ "
-"ßàÞÑÛÕÜÐ."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "½ÕÜÐâÕ ÝØøÕÔÝã ßÐàâØæØøã!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux øÕ ÒØèÕÚÞàØáÝØçÚØ áØáâÕÜ, Ð âÞ ×ÝÐçØ ÔÐ áÒÐÚØ ÚÞàØáÝØÚ ÜÞÖÕ ØÜÐâØ "
-"áÞßáâÒÕÝÕ\n"
-"ßÞáâÐÒÚÕ, áÞßáâÒÕÝÕ äÐøÛÞÒÕ, ØâÔ. ¼ÞÖÕâÕ ßàÞçØâÐâØ ``ÃßãáâÒÞ ×Ð ÚÞàØáÝØÚÕ''\n"
-"ÔÐ ÑØ áÐ×ÝÐÛØ ÒØèÕ Þ âÞÜÕ. °ÛØ ×Ð àÐ×ÛØÚã ÞÔ \"root\", ÚÞøØ øÕ ãáâÒÐàØ "
-"ÐÔÜØÝØáâàÐâÞà, ÚÞàØáÝØæØ\n"
-"ÚÞøÕ ÔÞÔÐâÕ ÞÒÔÕ ÝÕûÕ ÜÞûØ ÔÐ ÜÕúÐøã ÑØÛÞ èâÐ ÞáØÜ úØåÞÒØå\n"
-"äÐøÛÞÒÐ Ø úØåÞÒÕ ÚÞÝäØÓãàÐæØøÕ. ÂàÕÑÐÛÞ ÑØ ÔÐ ÚàÕØàÐâÕ ÝÐøÜÐúÕ øÕÔÝÞÓ\n"
-"ÞÑØçÝÞÓ ÚÞàØáÝØÚÐ ×Ð áÕÑÕ. ÂÐø àÐçãÝ øÕ ÞÝÐø ÝÐ ÚÞøØ âàÕÑÐ ÔÐ áÕ ÛÞÓãøÕâÕ \n"
-"×Ð àãâØÝáÚÞ ÚÞàØèûÕúÕ. ¸ÐÚÞ øÕ ÒÕÞÜÐ ßàÐÚâØçÝÞ ÔÐ áÕ ãÛÞÓãøÕâÕ ÚÐÞ \"root\" "
-"áÒÐÚØ ÔÐÝ,\n"
-"âÞ ÜÞÖÕ ÑØâØ ÒÕÞÜÐ ÞßÐáÝÞ! ¸ ÝÐøÜÐúÐ ÓàÕèÚÐ ÜÞÖÕ ×ÝÐçØâØ ÔÐ ÒÐè áØáâÕÜ\n"
-"ÝÕûÕ ÒØèÕ àÐÔØâØ. ÃÚÞÛØÚÞ ÝÐßàÐÒØâÕ Þ×ÑØùÝÕ ÓàÕèÚÕ ÚÐÞ ÞÑØçÝØ ÚÞàØáÝØÚ \n"
-"ÜÞÖÕâÕ øÕÔØÝÞ Ø×ÑÓãÑØâØ ÝÕèâÞ ØÝäÞàÜÐæØøÐ, ÐÛØ ÝÕ Ø æÕÛØ áØáâÕÜ.\n"
-"\n"
-"¿àÒÞ, ÜÞàÐâÕ ÔÐ ãÝÕáÕâÕ ÒÐèÕ ßàÐÒÞ ØÜÕ. ¾ÒÞ ÝØøÕ ÝÕÞßåÞÔÝÞ, ÝÐàÐÒÝÞ -\n"
-"øÕà ÜÞÖÕâÕ ßàØáâãßØâØ Ø Ø×ÜÕÝØâØ ÓÐ ÚÐÔÐ ÓÞÔ ÖÕÛØâÕ. DrakX ûÕ âÐÔÐ ã×ÕâØ "
-"ßàÒã\n"
-"àÕç ÚÞøØ áâÕ ãÝÕÛØ Ø áâÐÒØâØ ÓÐ ã ßàÞáâÞà ×Ð ãÝÞèÕúÕ ØÜÕÝÐ ÚÞàØáÝØÚÐ \"User\n"
-"name\". ¾ÒÞ øÕ ØÜÕ ÚÞøÕ ÞÔàÕÖÕÝØ ÚÞàØáÝØÚ âàÕÑÐ ÔÐ ÚÞàØáâØ ßàØ ÛÞÓÞÒÐúã ÝÐ\n"
-"áØáâÕÜ. ¼ÞÖÕâÕ ÓÐ ßàÞÜÕÝØâØ. Y½ÐÚÞÝ âÞÓÐ ÜÞàÐâÕ ãÝÕâØ ÛÞ×ØÝÚã ÞÒÔÕ.\n"
-"¾ÑØçÝØ, ÝÕ-ßàØÒØÛÕÓÞÒÐÝØ ÚÞàØáÝØçÚÐ ÛÞ×ØÝÚÐ ÝØøÕ ÞÔ ÒÕûÕÓ ×ÝÐçÐøÐ ÚÐÞ ÞÝÐ "
-"×Ð\n"
-"\"root\" ÚÞàØÞáÝØÚÐ áÐ áØÓãàÝÞáÝÕ âÐçÚÕ ÓÛÕÔÐúÐ, ÐÛØ âÞ ÝØøÕ àÐ×ÛÞÓ ×Ð "
-"ÞßãèâÐúÕ\n"
-"- ÝÐÚÞÝ áÒÕÓÐ, ÒÐèØ äÐøÛÞÒØ áã ã ßØâÐúã.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÚÛØÚÝÕâÕ ÝÐ ¿àØåÒÐâØ ÚÞàØáÝØÚÐ \"Accept user\", ÜÞÖÕâÕ ÔÞÔÐâØ øÞè "
-"ÚÞàØáÝØÚÐ. ´ÞÔÐøâÕ\n"
-"ÚÞàØáÝØÚÐ ×Ð áÒÐÚÞÓ ÒÐèÕÓ ßàØøÐâÕùÐ: ×Ð ÒÐèÕÓ ÞæÐ ØÛØ áÕáâàã, ÝÐ\n"
-"ßàØÜÕà. ºÐÔÐ ×ÐàèØâÕ ÔÞÔÐÒÐúÕ áÒØå ÖÕùÕÝØå ÚÞàØáÝØÚÐ, Ø×ÐÑÕàØâÕ ·ÒàèÕÝÞ "
-"\"Done\".\n"
-"\n"
-"ºÛØÚÞÜ ÝÐ âÐáâÕà ½ÐßàÕÔÝÞ \"Advanced\" ÜÞÖÕâÕ Ø×ÜÕÝØâØ default \"shell\"\n"
-"×Ð âàÕÝãâÝÞÓ ÚÞàØáÝØÚÐ (bash ßÞ default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"¸×ÝÐÔ áÕ ÝÐÛÐ×Ø ÛØáâÐ ßÞáâÞjeûØå Linux ßÐàâØæØja ÚÞjÕ áã ÔÕâÕÚâÞÒÐÝe\n"
-"ÝÐ åÐàÔ ÔØáÚã. ¼ÞÖÕâÕ ×ÐÔàÖÐâØ Ø×ÑÞà ÚÞjØ jÕ ÝÐßàÐÒØÞ çÐàÞÑúÐÚ, jÕà jÕ ÔÞÑÐà "
-"×a a\n"
-"Þßèâã ãßÞâàÕÑã. ÃÚÞÛØÚÞ ßàÞÜÕÝØâÕ Ø×ÑÞà, ÜÞàÐâÕ ÑÐà Ø×ÐÑàÐâØ root\n"
-"ßÐàâØæØjã (\"/\"). ½ÕÜÞjâÕ ÔÐ ÑØàÐâÕ áãÒØèÕ ÜÐÛã ßÐàâØæØjã jÕà ÝeûÕâÕ ÜÞûØ "
-"Ôa\n"
-"ØÝáâÐÛØàÐâÕ ÞÒÞùÝÞ áÞäâÒÕàa. ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßÞÔÐâÚÕ áâÐÒØùaâÕ ÝÐ ßÞáÕÑÝã "
-"ßÐàâØæØjã ,\n"
-"ÜÞàÐâÕ ÔÐ Ø×ÐÑÕàÕâÕØ Ø \"/home\" (ÜÞÓãûÕ jÕ ãÚÞÛØÚÞ ØÜÐâÕ ÒØèÕ ÞÔ jÕÔÝÕ\n"
-"Linux ßÐàâØæØje).\n"
-"\n"
-"\n"
-"¸ÝäÞàÜÐæØjÐ: áÒÐÚÐ ßÐàâØæØjÐ jÕ ßàØÚÐ×ÐÝa ÝÐ áÛÕÔeûØ ÝaçØÝ: \"¸Üe\", "
-"\"ºÐßÐæØâÕâ\".\n"
-"\n"
-"\n"
-"\"¸ÜÕ\" je ÚÞÔØàÐÝÞ ÝÐ áÛÕÔeûØ ÝaçØÝ: \"âØß åÐàÔ ÔØáÚa\", \"ÑàÞj åÐàÔ ÔØáÚa"
-"\",\n"
-"\"ßàÞj ßÐàâØæØje\" (ÝÐ ßàØÜÕà, \"hda1\").\n"
-"\n"
-"\n"
-"\"ÂØß åÐàÔ ÔØáÚa\" je \"hd\" ãÚÞÛØÚÞ jÕ åÐàÔ ÔØáÚ IDE ãàÕòÐø Ø  \"sd\"\n"
-"ãÚÞÛØÚÞ je SCSI åÐàÔ ÔØáÚ.\n"
-"\n"
-"\n"
-"\"±àÞj åÐàÔ ÔØáÚÐ\" jÕ ãÒÕÚ áÛÞÒÞ ßÞáÛÕ \"hd\" ØÛØ \"sd\". ·Ð IDE åÐàÔ "
-"ÔØáÚÞÒÕ:\n"
-"\n"
-"   * \"a\" ×ÝaçØ  \"master åÐàÔ ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ  IDE ÚÞÝâàÞÛÕàã\",\n"
-"\n"
-"   * \"b\" ×ÝaçØ \"slave åÐàÔ ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ IDE ÚÞÝâàÞÛÞÕàã\",\n"
-"\n"
-"   * \"c\" ×ÝaçØ \"master åÐàÔ ÔØáÚ ÝÐ áÕÚãÝÔàÐÝÞÜ IDE ÚÞÝâàÞÛÞÕàã\",\n"
-"\n"
-"   * \"d\" ×ÝaçØ \"slave åÐàÔ ÔØáÚ ÝÐ áÕÚãÝÔÐàÝÞÜ IDE ÚÞÝâàÞÛÕàã\".\n"
-"\n"
-"\n"
-"ÁÐ SCSI åÐàÔ ÔØáÚÞÒØÜa, a \"a\" ×ÝaçØ \"ßàØÜÐàÝØ åÐàÔ ÔØáÚ\", a \"b\" ×ÝaçØ "
-"\"áÕÚãÝÔÐàÝØ åÐàÔ ÔØáÚ \", ØâÔ..."
-
-#: ../../help.pm_.c:72
-#, fuzzy
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux ØÝáâÐÛÐæØøÐ áÕ ÝÐÛÐ×Ø ÝÐ ÝÕÚÞÛØÚÞ ÔØáÚÞÒÐ ØÛØâØ CDROM-ÞÒÐ. "
-"DrakX\n"
-"×ÝÐ ãÚÞÛØÚÞ ÔÐ ãÚÞÛØÚÞ øÕ áÕÛÚâÞÒÐÝØ ßÐÚÕâ ÛÞæØàÐÝ ÝÐ ÔàãÓÞÜ CDROM-ã Ø "
-"Ø×ÑÐæØûÕ\n"
-"câàÕÝãâÝØ  CD âÕ âàÐÖØâØ ÞÔ ÒÐá ÔÐ ãÑÐæØâÕ ÞÔÓÞÒÐàÐøãûØ."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"ÁÐÔÐ øÕ ÒàÕÜÕ ÔÐ ÞÔàÕÔØÜÞ ÚÞøÕ ßàÞÓàÐÜÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ ÝÐ ÒÐè\n"
-"áØáâÕÜ. ¿ÞáâÞøÕ åØùÐÔÕ ßÐÚÕâÐ ÔÞáâãßÝØå ×Ð ØÝáâÐÛÐæØøã ÝÐ Mandrake Linux, "
-"Ø \n"
-"ßàÕÔßÞáâÐÒùÐÜÞ ÔÐ ÝÕ ÜÞàÐâÕ ÔÐ Øå áÒÕ ßÞ×ÝÐøÕâÕ, ÝÐàÐÒÝÞ.\n"
-"\n"
-"ÃÚÞÛØÚÞ Ø×ÒÞÔØâÕ áâÐÝÔÐàÔÝã ØÝáâÐÛÐæØøã áÐ CDROM-Ð, ßàÒÞ ûÕâÕ ÑØâØ\n"
-"ãßØâÐÝØ ÔÐ ÔÐ áßÕæØäØæØàÐâÕ ÚÞøÕ CD-ÞÒÕ ØÜÐâÕ (áÐÜÞ ã Expert ÜÞÔã). "
-"¿àÞÒÕàØâÕ\n"
-"Þ×ÝÐÚÕ ÝÐ CD-ÞÒØÜÐ Ø Þ×ÝÐçØâÕ ÞÝÕ ÚÞøÕ ßÞáÕÔãøÕâÕ\n"
-"×Ð ØÝáâÐÛÐæØøã. ºÛØÚÝØâÕ ÝÐ Ã àÕÔã \"OK\" ÚÐÔÐ áâÕ áßàÕÜÝØ ÔÐ ÝÐáâÐÒØâÕ.\n"
-"\n"
-"¿ÐÚÕâØ áã áÞàâØàÐÝØ ã ÓàãßÕ ã ÞÔÝÞáã ÝÐ ÞÔÓÞÒÐàÐøãûã ãßÞâàÕÑã ÝÐ ÒÐèÞø\n"
-"ÜÐèØÝØ. ÁÐÜÕ ÓàãßÕ áã áÞàâØàÐÝÕ ã çÕâØàØ áÕÚæØøÕ:\n"
-"\n"
-" * \"ÀÐÔÝÐ áâÐÝØæÐ\": ãÚÞÛØÚÞ ßÛÐÝØàÐâÕ ÔÐ ÚÞàØáâØâÕ ÒÐèã ÜÐèØÝã ÚÐÞ àÐÔÝã "
-"áâÐÝØæã, Ø×ÐÑÕàØâÕ\n"
-"øÕÔÝã ØÛØ ÒØèÕ ÞÔÓÞÒÐàÐøãûØå ÓàãßÐ.\n"
-"\n"
-" * \"ÀÐ×ÒÞø\": ãÚÞÛØÚÞ ÜÐèØÝÐ âàÕÑÐ ÔÐ áÕ ÚÞàØáâØ ×Ð ßàÞÓàÐÜØàÐúÕ, Ø×ÐÑÕàØâÕ "
-"ÖÕùÕÝã(Õ)\n"
-"Óàãßã(Õ).\n"
-"\n"
-" * \"ÁÕàÒÕà\": ãÚÞÛØÚÞ ûÕ áÕ ÜÐèØÝÐ ÚÞàØáâØâØ ÚÐÞ áÕàÒÕà, ÜÞûØ ûÕâÕ ÔÐ \n"
-"Ø×ÐÑÕàÕâÕ ÚÞøÕ ÞÔ ÝÐøçÕèûØå áÕàÒØáÐÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ ÝÐ\n"
-"ÜÐèØÝã.\n"
-"\n"
-" * \"³àÐäØçÚÞ ¾ÚàãÖÕúÕ\": ÝÐ ÚàÐøã, ÞÒÔÕ ûÕâÕ Ø×ÐÑàÐâØ ÒÐèÕ\n"
-"ÞÜØùÕÝÞ ÓàÐäØçÚÞ ÞÚàãÖÕúÕ. ¼ÞàÐâÕ Ø×ÐÑàÐâØ ÑÐà øÕÔÝÞ ÔÐ ÑØ ØÜÐÛØ\n"
-"ÓàÐäØçÚã àÐÔÝã áâÐÝØæã!\n"
-"\n"
-"ºàÕâÐúÕÜ ÚãàáÞàÐ ÜØèÐ ßàÕÚÞ ØÜÕÝÐ ÓàãßÕ ÔÞÑØûÕâÕ ÚàÐâÚÞ ÞÑøÐèúÕúÕ\n"
-"Þ âÞø ÓàãßØ. ÃÚÞÛØÚÞ ÝÕ áÕÛÕÚâãøÕâÕ ÝØ øÕÔÝã Óàãßã ÚÐÔÐ Ø×ÒÞÔØâÕ\n"
-"ÞáÝÞÒÝã ØÝáâÐÛÐæØøã (×Ð àÐ×ÛØÚã ÞÔ ÐÖãàØàÐúÐ), ßÞøÐÒØûÕ áÕ ÔØøÐÛÞÓ\n"
-"áÐ àÐ×ÛØçØâØÜ ßàÕÔÛÞ×ØÜÐ ×Ð ÜØÝØÜÐÛÝã ØÝáâÐÛæØøã:\n"
-"\n"
-" * ¸ÝáâÐÛØàÐûÕ ÜØÝØÜÐÝÞ ßÞâàÕÑÝÞ ×Ð àÐÔ Linux áØáâÕÜÐ,\n"
-"ÝÐàÐÒÝÞ áÐÜÞ ã ÚÞÜÐÝÔÝÞø ÛØÝØøØ.\n"
-"\n"
-" * ¸ÝáâÐÛØàÐ ÞáÝÞÒÝØ áØáâÕÜ ßÛãá ÞáÝÞÒÝÕ ÐÛÐâÕ\n"
-"\n"
-" * ¸ÝáâÐÛØàÐ ÝÕÚÞÛØÚÞ ßÐÚÕâÐ àÐÔØ ÓàÐäØçÚÞÓ ÔÕáÚâÞßÐ\n"
-"\n"
-"¼ÞÖÕâÕ áÕÛÕÚâÞÒÐâØ Ø ¿ÞøÕÔØÝÐçÝÞ ÑØàÐúÕ ßÐÚÕâÐ \"Individual package selection"
-"\", ÚÞøÕ øÕ ÚÞàØáÝÞ ãÚÞÛØÚÞ\n"
-"áã ÒÐÜ ßÞ×ÝÐâØ ßÞÝãòÕÝØ ßÐÚÕâØ Ø ÖÕÛØâÕ ÔÐ ØÜÐâÕ ßÞâßãÝã \n"
-"ÚÞÝâàÞÛã ÝÐÔ áÒØÜ èâÞ ûÕ ÑØâØ ØÝáâÐÛØàÐÝÞ.\n"
-"\n"
-"ÃÚÞÛØÚÞ áâÕ ßÞÚàÕÝãÛØ ÐÖãàØàÐúÕ ØÛØ \"Upgrade\" ÜÞÔ, ÜÞÖÕâÕ ÔÕáÕÛÕÚâÞÒÐâØ "
-"áÒÕ\n"
-"ÓàãßÕ ÔÐ ÑØ Ø×ÑÕÓÛØ ØÝáâÐÛÐæØøã ÑØÛÞ ÚÞÓ ÝÞÒÞÓ ßÐÚÕâÐ. ¾ÒÞ øÕ ÚÞàØáÝÞ ×Ð "
-"ßÞßàÐÒùÐúÕ ØÛØ\n"
-"ÐÖãàØàÐúÕ ßÞáâÞøÕûÕÓ áØáâÕÜÐ."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"½Ð ÚàÐøã, ã ×ÐÒØáÝÞáâØ ÞÔ ÒÐèÕÓ Ø×ÑÞàÐ ÔÐ ÔÐ ÑØàÐâÕ ßÞøÕÔØÝÐçÝÕ ßÐÚÕâÕ\n"
-"ØÛØ ÝÕ, ÑØûÕ ÒÐÜ ßàØÚÐ×ÐÝÞ áâÐÑÛÞ áÐ áÒØÜ ßÐÚÕâØÜÐ ÚÛÐáØäØÚÞÒÐÝØÜ\n"
-"ßÞ ÓàãßÐÜÐ Ø ßÞÔÓàãßÐÜÐ. ´ÞÚ ßàÕâàÐÖãøÕâÕ áâÐÑÛÞ, ÜÞÖÕâÕ áÕÛÕÚâÞÒÐâØ æÕÛÕ\n"
-"ÓàãßÕ, ßÞÔÓàãßÕ, ØÛØ ØÝÔØÒØÔãÐÛÝÕ ßÐÚÕâÕ.\n"
-"\n"
-"ºÐÔÐ ÚÞÔ áÕÛÕÚâãøÕâÕ ßÐÚÕâ ÝÐ áâÐÑÛã, ÞßØá áÕ ßÞøÐÒùãøÕ áÐ ÔÕáÝÕ\n"
-"áâàÐÝÕ. ºÐÔÐ øÕ ÒÐèÐ áÕÛÕÚæØøÐ ×ÐÒàèÕÝÐ, ÚÛØÚÝØâÕ ÝÐ ¸ÝáâÐÛÐæØøÐ \"Install\" "
-"âÐáâÕà ÚÞøØ\n"
-"ûÕ ßÞÚàÕãâØ ØÝáâÐÛÐæØÞÝØ ßàÞæÕá. à ×ÐÒØáÝÞáâØ Ñà×ØÝÕ ÒÐèÕÓ\n"
-"åÐàÔÒÕàÐ Ø ÑàÞøÐ ßÐÚÕâÐ ÚÞøÕ âàÕÑÐ ÔÐ áÕ ØÝáâÐÛØàÐøã, ØÝáâÐÛÐæØøÐ ÜÞÖÕ\n"
-"Ø ßÞâàÐøÐâØ. ¿àÞæÕúÕÝÞ ÒàÕÜÕ ÔÞ ×ÐÒàèÕâÚÐ ØÝáâÐÛÐæØøÕ øÕ ßàØÚÐ×ÐÝÞ\n"
-"ÝÐ ÕÚàÐÝã ÔÐ ÑØ ÒÐÜ ßÞÜÞÓÛÞ ÔÐ ÒØèÐÚ ÒàÕÜÕÝÐ ØáÚÞàØáâØâÕ ÔÐ ßÞßØøÕâÕ èÞùã "
-"çÐøÐ ØÛØ\n"
-"ÚÐäÕ.\n"
-"\n"
-"!! ÃÚÞÛØÚÞ øÕ áÕàÒÕà ßÐÚÕâ Ø×ÐÑàÐÝ áÛãçÐøÝÞ ØÛØ ÚÐÞ ÔÕÞ\n"
-"æÕÛÕ ÓàãßÕ, ÑØûÕâÕ ãßØâÐÝØ ÔÐ ÛØ ×ÐØáâÐ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ\n"
-"ßÞÝãòÕÝÕ áÕàÒÕàÕ. ¿ÞÔ Mandrake Linux-ÞÜ, áÒØ ØÝáâÐÛØàÐÝØ\n"
-"áÕàÒÕàØ áÕ áâÐàâãøã ßÞ default-ã ×Ð ÒàÕÜÕ ßÞÔØ×ÐúÐ áØáâÕÜÐ. ÇÐÚ Ø ÐÚÞ áã "
-"áØÓãàÝØ Ø ÝÕÜÐøã\n"
-"ßÞ×ÝÐâØå ÑÕ×ÑÕÔÝÞáÝØå ßàÞßãáâÐ ÔÞ ÒàÕÜÕÝÐ Ø×ÛÐáÚÐ ÔØáâàØÑãæØøÕ, ÜÞÖÕ áÕ "
-"ÔÕáØâØ\n"
-"ÔÐ áØÓãàÝÞáÝÕ àãßÕ ÑãÔã ÞâÚØÒÕÝÕ ÚÐáÝØøÕ.\n"
-" ÃÚÞÛØÚÞ ÝÕ ×ÝÐâÕ ÚÞøØ ßÞøÕÔØÝÐçÝØ áÕàÒØá èâÐ âàÕÑÐ ÔÐ àÐÔØ\n"
-"ØÛØ ×ÐèâÞ áÕ ØÝáâÐÛØàÐ, ÞÝÔÐ ÚÛØÚÝØâÕ \"½Õ\". ºÛØÚÞÜ ÝÐ \"´Ð\" ûÕâÕ\n"
-"ØÝáâÐÛØàÐâØ ßàØÚÐ×ÐÝÕ áÕàÒØá Ø ÞÝØ ûÕ ÑØâØ ßÞÚàÕÝãâØ ÐãâÞÜÐâáÚØ ßÞ\n"
-"default-ã. !!\n"
-"\n"
-"¾ßæØøÐ °ãâÞÜÐâáÚÕ ×ÐÒØáÝÞáâØ ØÛØ \"Automatic dependencies\" øÕÔÝÞáâÐÒÝÞ "
-"ØáÚùãçãøÕ ÔØøÐÛÞÓ áÐ ãßÞ×ÞàÕúÕÜ\n"
-"ÚÞøØ áÕ øÐÒùÐ áÒÐÚØ ßãâ ÚÐÔÐ ØÝáâÐÕà ÐãâÞÜÐâáÚØ áÕÛÕÚâãøÕ ßÐÚÕâÕ. ¾ÒÞ áÕ\n"
-"øÐÒùÐ ×ÐâÞ èâÞ ÞÝ ÞÔàÕòãøÕ ÔÐ ÜÞàÐ ÔÐ ×ÐÔÞÒÞùØ ×ÐÒØáÝÞáâØ áÐ ÔàãÓØÜ\n"
-"ßÐÚÕâÞÜ ÔÐ ÑØ ãáßÕèÝÞ ×ÐÒàèØÞ ØÝáâÐÛÐæØøã.\n"
-"\n"
-"¼ÐÛÐ ØÚÞÝØæÐ äÛÞßØ ÔØáÚÐ ÝÐ ÔÝã ÛØáâÕ ÒÐÜ ÞÜÞÓãûÐÒÐ ÔÐ ãçØâÐâÕ\n"
-"ÛØáâã ßÐÚÕâÐ ÑØàÐÝÕ âÞÚÞÜ ßàÕâåÞÔÝÕ ØÝáâÐÛÐæØøÕ. ºÛØÚÞÜ ÝÐ ÞÒã ØÚÞÝØæã\n"
-"ûÕ ÞÔ ÒÐá ÑØâØ âàÐÖÕÝÞ ÔÐ ãÑÐæØâÕ ÔØáÚÕâã ÚàÕØàÐÝã àÐÝØøÕ ÝÐ ÚàÐøã \n"
-"ßàÕâåÞÔÝÕ ØÝáâÐÛÐæØøÕ. ¿ÞÓÛÕÔÐøâÕ ßÞáÛÕÔúØ ßÐáãá (ÚÞàÐÚ) ÔÐ ÑØ ÝÐãçØÛØ ÚÐÚÞ "
-"ÔÐ ÚàÕØàÐâÕ \n"
-"âÐÚÒã ÔØáÚÕâã."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ßÞÒÕÖÕâÕ ÒÐè àÐçãÝÐà ÝÐ ¸ÝâÕàÝÕâ ØÛØ ÝÐ ÛÞÚÐÛÝã ÜàÕÖã,\n"
-"Ø×ÐÑÕàØâÕ ØáßàÐÒÝÕ ÞßæØøÕ. ÃÚùãçØâÕ ÒÐèÕ ãàÕòÐøÕ ßàÕ Ø×ÑÞàÐ\n"
-"ÞßæØøÐ ÔÐ ÑØ DrakX ÜÞÓÐÞ ÔÐ Øå ÔÕâÕÚâãøÕ ÐãâÞÜÐâáÚØ.\n"
-"\n"
-"Mandrake Linux ÝãÔØ ßÞÔÕèÐÒÐúÕ Internet ÚÞÝÕÚæØøÕ ã\n"
-"âÞÚã ØÝáâÐÛÐæØøÕ. ¼ÞÓãûÕ ÚÞÝÕÚæØøÕ áã: âàÐÔØæØÞÝÐÛÝØ ÜÞÔÕÜ, ISDN\n"
-"ÜÞÔÕÜ, ADSL ÚÞÝÕÚæØøÐ, ÚÐÑÛÞÒáÚØ ÜÞÔÕÜ, Ø ÝÐ ÚàÐøã øÕÔÝÞáâÐÒÝÐ LAN "
-"ÚÞÝÕÚæØøÐ\n"
-"(Ethernet).\n"
-"\n"
-"¾ÒÔÕ ÝÕûÕÜÞ ÔÕâÐùÝÞ ÞßØáØÒÐâØ áÒÐÚã ÚÞÝäØÓãàÐæØøã. ¨ÕÔÝÞáâÐÒÝÞ ßàÞÒÕàØâÕ ÔÐ "
-"ÛØ ØÜÐâÕ\n"
-"áÒÕ ßÐàÐÜÕâàÕ ÞÔ ÒÐèÕÓ ¸ÝâÕàÝÕâ ¿àÞÒÐøÔÕàÐ ØÛØ áØáâÕÜáÚÞÓ\n"
-"ÐÔÜØÝØáâàÐâÞàÐ.\n"
-"\n"
-"¼ÞÖÕâÕ ÚÞÝáãÛâÞÒÐâØ Ø ÔÕÞ ãßãáâÒÐ Þ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØøÐÜÐ ×Ð ÔÕâÐùÕ\n"
-"Þ ÚÞÝäØÓãàÐæØøØ, ØÛØ øÕÔÝÞáâÐÒÝÞ áÐçÕÚÐøâÕ ÔÐ ÒÐÜ áÕ áØáâÕÜ ØÝáâÐÛØàÐ Ø\n"
-"ÞÝÔÐ ßÞÚàÕÝØâÕ ßàÞÓàÐÜ ÚÞøØ øÕ âÐÜÞ ÞßØáÐÝ ×Ð ßÞÔÕèÐÒÐúÕ ÒÐèÕ ÚÞÝÕÚæØøÕ.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÜàÕÖã ÝÐÚÞÝ ØáÝâÐÛÐæØøÕ ØÛØ áâÕ ×ÐÒàèØÛØ\n"
-"ÚÞÝäØÓãàØáÐúÕ ÜàÕÖÝÕ ÚÞÝÕÚæØøÕ, ÚÛØÚÝØâÕ ÝÐ ¿ÞÝØèâØ ØÛØ \"Cancel\"."
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"ÁÐÔÐ ÜÞÖÕâÕ ÞÔÐÑàÐâØ ÚÞje áÕàÒØáe ÖÕÛØâÕ ÔÐ áÕ áâÐàâÐjã ßàØ ßÞÔØ×aúã "
-"áØáâÕÜa.\n"
-"\n"
-"¾ÒÔÕ áã ßàØÚÐ×ÐÝØ áÒØ ÔÞáâãßÝØ áÕàÒØáØ ÝÐ âàÕÝãâÝÞø\n"
-"ØÝáâÐÛÐæØøØ. ¿àÕÓÛÕÔÐøâÕ Øå ßÐÖùØÒÞ Ø ÔÕáÕÛÕÚâãøâÕ ÞÝÕ ÚÞøØ ÒÐÜ ÝÕûÕ ÑØâØ "
-"ãÒÕÚ\n"
-"ßÞâàÕÑÝØ ßàØ ßÞÔØ×Ðúã áØáâÕÜÐ.\n"
-"\n"
-"¼ÞÖÕâÕ ÔÞÑØâØ Ø ÚàÐâÚÞ ÞÑøÐèúÕúÕ Þ áÕàÒØáã áÕÛÕÚâÞÒÐúÕÜ\n"
-"ÞÔàÕòÕÝÞÓ áÕàÒØáÐ. ¼ÕòãâØÜ, ãÚÞÛØÚÞ ÝØáâÕ áØÓãàÝØ ÚÞøØ ÞÔ áÕàÒØáÐ øÕáã ØÛØ\n"
-"ÝØáã ÚÞàØáÝØ, áØÓãàÝØøÕ øÕ ÞáâÐÒØâØ Øå áÕÛÕÚâÞÒÐÝØÜ.\n"
-"\n"
-"½Ð ÞÒÞÜ ÝØÒÞã, ÑãÔØâÕ ÒÕÞÜÐ ßÐÖùØÒØ ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ  ÒÐèã ÜÐèØÝã "
-"ÚÐÞ\n"
-"áÕàÒÕà: ÒÕàÞÒÐâÝÞ ÝÕûÕâÕ ÖÕÛÕâØ ÔÐ áâÐàâãøÕâÕ ÝØøÕÔÐÝ áÕàÒØá ÚÞøØ ÒÐÜ ÝÕûÕ\n"
-"âàÕÑÐâØ. ·ÐßÐÜâØâÕ ÔÐ ÝÕÚÞÛØÚÞ áÕàÒØáÐ ÜÞÖÕ ÑØâØ ÞßÐáÝÞ ãÚÞÛØÚÞ\n"
-"áã ÞÜÞÓãûÕÝØ ÝÐ áÕàÒÕàã. ³ÕÝÕàÐÝÞ ÓÞÒÞàÕûØ, Ø×ÐÑÕàØâÕ áÐÜÞ áÕàÒØáÕ ÚÞøÕ ûÕâÕ "
-"áÒÐàÝÞ âàÕÑÐâØ."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (áÚàÐûÕÝØæÐ ×Ð X Window ÁØáâÕÜ) øÕ áàæÕ GNU/Linux ÓàÐäØçÚÞÓ ØÝâÕàäÕøáÐ\n"
-"ÝÐ ÚÞøØ áÕ áÒÐ ÓàÐäØçÚÐ ÞÚàãÖÕúÐ (KDE, Gnome, AfterStep,\n"
-"WindowMaker, etc.) ÞáÛÐúÐøã. Ã ÞÒÞÜ ÔÕÛã, DrakX\n"
-"ûÕ ßÞÚãèÐâØ ÔÐ ÐãâÞÜÐâáÚØ ßÞÔÕáØ X-ÞÒÕ.\n"
-"\n"
-"·ÐØáâÐ áÕ àÕâÚÞ ÔÕèÐÒÐ ÔÐ ÝÕãáßÕ, ÞáØÜ ãÚÞÛØÚÞ åÐàÒÕà ÝØøÕ ÒÕÞÜÐ áâÐà (ØÛØ\n"
-"ÒÕÞÜÐ ÝÞÒ). ÃÚÞÛØÚÞ ãáßÕ, ÞÝ ûÕ ÐãâÞÜÐâáÚØ ßÞÚàÕÝãâØ X-ÞÒÕ áÐ ÝÐøÑÞùÞÜ\n"
-"ÜÞÓãûÞÜ àÕ×ÞÛãæØøÞÜ ã ×ÐÒØáÝÞáâØ ÞÔ ÒÕÛØçØÝÕ ÜÞÝØâÞàÐ. ¿ÞøÐÒØûÕ áÕ ßàÞ×Þà\n"
-"áÐ ßØâÐúÕÜ ÔÐ ÛØ ÓÐ ÒØÔØâÕ.\n"
-"\n"
-"ÃÚÞÛØÚÞ Ø×ÒÞÔØâÕ \"µÚáßÕàâ\" ØÝáâÐÛÐæØøã, ßÞÚàÕÝãûÕâÕ ÇÐàÞÑúÐÚÐ ×Ð X\n"
-"ÚÞÝäØÓãàÐæØøã. ¿ÞÓÛÕÔÐøâÕ ÞÔÓÞÒÐàÐøãûØ ÔÕÞ ãßãâáÒÐ ×Ð ÒØèÕ ØÝäÞàÜÐæØøÐ\n"
-"Þ ÞÒÞÜ çÐàÞÑúÐÚã.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÒØÔØâÕ ÓÞàÕßÞÜÕÝãâã ßÞàãÚã Ø ÞÔÓÞÒÞàØâÕ áÐ \"´Ð\", âÐÔÐ ûÕ DrakX "
-"ÝÐáâÐÒØâØ áÐ\n"
-"áÛÕÔÕûØÜ ÚÞàÐÚÞÜ. ÃÚÞÛØÚÞ ÝÕ ÜÞÖÕâÕ ÔÐ ÒØÔØâÕ ßÞàãÚã, âÞ øÕÔÝÞáâÐÒÝÞ ×ÝÐçØ\n"
-"ÔÐ øÕ ÚÞÝäØÓãàÐæØøÐ ßÞÓàÕèÝÐ Ø ÔÐ ûÕ áÕ âÕáâ áÐÜ ×ÐÒàèØâØ ÝÐÚÞÝ\n"
-"10 áÕÚãÝÔØ, ÞáÒÕÖÐÒÐøãûØ ÕÚàÐÝ."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"ºÐÔ ßÞ ßàÒØ ßãâ ÑãÔÕâÕ âÕáâØàÐÛØ X ÚÞäØÓãàÐæØøã, ÜÞÖÔÐ ÝÕûÕâÕ ÑØâØ ÑÐè "
-"×ÐÔÞÒÞùÝØ\n"
-"áÐ ßàØÚÐ×ÞÜ (ÕÚàÐÝ øÕ ßÞàÕÒØèÕ ÜÐÛØ, ßÞÜÕàÕÝ ãÛÕÒÞ ØÛØ ãÔÕáÝÞ...). ÁàÕûÞÜ,\n"
-"çÐÚ Ø ÐÚÞ áÕ X ßÞÚàÕÝÕ ØáßàÐÒÝÞ, DrakX ûÕ ÒÐá ãßØâÐâØ ÔÐ ÛØ ÒÐÜ "
-"ÚÞÝäØÓãàÐæØøÐ\n"
-"ÞÔÓÞÒÐàÐ. ÂÐÚÞòÕ ûÕ ßàÕÔÛÞÖØâØ Ø×ÜÕÝÕ ã ßàØÚÐ×ã Ø ÔÐâØ ÛØáâã\n"
-"ÜÞÓãûØå ÜÞÔÞÒÐ âàÐÖÕûØ ÞÔ ÒÐá ÔÐ Ø×ÐÑÕàÕâÕ øÕÔÐÝ.\n"
-"\n"
-"ºÐÞ ßÞáÛÕÔúÕ àÕèÕúÕ, ÐÚÞ øÞè ãÒÕÚ ÝÕ ÜÞÖÕâÕ ÔÐ ßÞÚàÕÝÕâÕ X-ÞÒÕ, Ø×ÐÑÕàØâÕ "
-"\"Change\n"
-"graphics card\", Ø×ÐÑÕàØâÕ \"Unlisted card\", Ø ÚÐÔÐ ÒÐá ãßØâÐ ÚÞøØ\n"
-"áÕàÒÕà ÖÕÛØâÕ, Ø×ÐÑÕàØâÕ \"FBDev\". ¾ÒÞ øÕ áØÓãàÝÞáÝÐ ÞßæØøÐ ÚÞøÐ àÐÔØ\n"
-"áÐ ÑØÛÞ ÚÞøÞÜ ÜÞÔÕàÝØøÞÜ ÓàÐäØçÚÞÜ ÚÐàâØæÞÜ. ÂÐÔÐ Ø×ÐÑÕàØâÕ \"Test again\" "
-"ÔÐ ÑØ ÑØÛØ áØÓãàÝØ."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"½Ð ÚàÐøã, ÑØûÕâÕ ãßØâÐÝØ ÔÐ ÛØ ÖÕÛØâÕ ÓàÐäØçÚØ ØÝâÕàäÕøá\n"
-"ßàØ áâÐàâÐúã áØáâÕÜÐ. ¾ÒÞ ßØâÐúÕ ûÕ ÒÐÜ ÑØâØ ßÞáâÐÒúÕÝÞ çÐÚ Ø ÐÚÞ ÝØáâÕ "
-"âÕáâØàÐÛØ\n"
-"ÚÞÝäØÓãàÐæØøã. ½ÐàÐÒÝÞ, ÞÔÓÞÒÞàØûÕâÕ \"½Õ\" ãÚÞÛØÚÞ ÒÐèÐ ÜÐèØÝÐ ßàÕÔáâÐùÐ\n"
-"áÕàÒÕà, ØÛØ ãÚÞÛØÚÞ ÝØáâÕ ãáßÕèÝÞ ßÞÔÕáØÛØ\n"
-"ÔØáßÛÕøed."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM ØÜÐ ãÓàÐòÕÝ áßÐáØÛÐçÚØ ÜÞÔ. ¼¾ÖÕâÕ Üã ßàØáâãßØâØ\n"
-"ßÞÔØ×ÐÕÜ áØáâÕÜÐ ßàÕÚÞ CDROM-Ð, ßàØâØáÝØâÕ >>F1<< âÐáâÕà ßàØ áâÐàâÐúã Ø "
-"ãÚãæÐøâÕ >>rescue<< ã\n"
-"ßàÞÜßâã. ÃÚÞÛØÚÞ ÝÕ ÜÞÖÕâÕ ÔÐ ÑãâãøÕâÕ áÐ CDROM-Ð, âàÕÑÐÛØ\n"
-"ÑØ ÔÐ áÕ ÒàÐâØâÕ  ÝÐ ÞÒÕ ÚÞàÐÚÕ ã ÝÐøÜÐúÕ ÔÒÕ áØâãÐæØøÕ:\n"
-"\n"
-" * ÚÐÔÐ ØÝáâÐÛØàÐâÕ áâÐàâÕà, DrakX ûÕ ßàÕßØáÐâØ áÐÔàÖÐø boot áÕÚâÞàÐ (MBR)\n"
-"ÒÐèÕÓ ÞáÝÞÒÝÞÓ ÔØáÚÐ (ÞáØÜ ãÚÞÛØÚÞ ÝÕ ÚÞàØáâØâÕ ÝÕÚØ ÔàãÓØ áâÐàâÕà) ÔÐ ÑØ "
-"ÜÞÓÛØ \n"
-"ÔÐ ßÞÚàÕÝÕâÕ ØÛØ Windows ØÛØ GNU/Linux (ßàÕâßÞáâÐÒùÐøãûØ ÔÐ ØÜÐâÕ ØÝáâÛØàÐÝ "
-"Windows ÝÐ\n"
-"ÒÐèÕÜ áØáâÕÜã). ÃÚÞÛØÚÞ âàÕÑÐ ÔÐ àÕØÝáâÐÛØàÐâÕ Windows,  Microsoft-ÞÒ "
-"ØÝáâÐÛÐæØÞÝØ\n"
-"ßàÞæÕá ûÕ ÞßÕâ ßàÕßØáÐâØ boot áÕÚâÞà, ßÐ ÞÝÐ ÝÕûÕâÕ ÑØâØ ã ÜÞÓãûÝÞáâØ\n"
-"ÔÐ ßÞÚàÕÝÕ GNU/Linux!\n"
-"\n"
-" * ãÚÞÛØÚÞ áÕ ßàÞÑÛÕÜ øÐÒùÐ Ø ÝÕ ÜÞÖÕâÕ ÔÐ ßÞÚàÕÝÕâÕ GNU/Linux áÐ åÐàÔ "
-"ÔØáÚÐ,\n"
-"ÞÒÐø äÛÞßØ ÔØáÚ ûÕ ÞÝÔÐ ÑØâØ øÕÔØÝØ ÝÐçØÝ ×Ð áâÐàâÐúÕ GNU/Linux-Ð. ¾Ý\n"
-"áÐÔàÖØ ÔÞÑÐà ÑàÞø áØáâÕÜáÚØå ÐÛÐâÐ ×Ð ÞÑÝÞÒã áØáâÕÜÐ, ÚÞøØ áÕ\n"
-"áàãèØÞ ãáÛÕÔ ÝÕáâÐÝÚÐ ÕÛ.ÕÝÕàÓØøÕ, ÝÕáàÕâÝÕ ÓàÕèÚÕ ã ÚãæÐúã, ßÞÓàÕèÝÕ\n"
-"ÛÞ×ØÝÚÕ, ØÛØ ÑØÛÞ ÚÞÓ ÔàãÓÞÓ àÐ×ÛÞÓÐ.\n"
-"\n"
-"ºÐÔÐ ÚÛØÚÝÕâÕ ÝÐ ÞÒÐø ÚÞàÐÚ, âàÐÖØûÕ áÕ ÞÔ ÒÐá ÔÐ ãÑÐæØâÕ ßàÐ×Ýã ÔØáÚÕâã\n"
-"ã ãàÕòÐø. ÄÛÞßØ ÔØáÚÕâÐ  ÜÞàÐ ÑØâØ ßàÐ×ÝÐ ØÛØ ÔÐ áÐÔàÖØ ßÞÔÐâÚÕ ÚÞøØ ÒÐÜ "
-"ÝØáã ÝÕÞßåÞÔÝØ\n"
-"½ÕÜÐ ßÞâàÕÑÕ ÔÐ øÕ äÞàÜÐâØàÐâÕ øÕà ûÕ DrakX áÐÜ ßÞÝÞÒÞ ãßØáÐâØ\n"
-"æÕÛã ÔØáÚÕâã."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"à ÞÒÞÜ âàÕÝãâÚã, ÜÞàÐâÕ ÔÐ Ø×ÐÑÕàÕâÕ ÓÔÕ ûÕâÕ ØÝáâÐÛØàÐâØ\n"
-"Mandrake Linux ÞßÕàÐâØÒÝØ áØáâÕÜ ÝÐ Òaè åÐàÔ ÔØáÚ. ÃÚÞÛØÚÞ jÕ ßàÐ×ÐÝ ØÛØ\n"
-"ßÞáâÞjeûØ ÞßÕàÐâØÒÝØ áØáâÕÜ ÚÞàØáâØ áÐÒ ßÞáâÞjeûØ ßàÞáâÞà ÝÐ ÔØáÚã, âàÕÑÐ Ôa "
-"ÓÐ\n"
-"ßÐàâØæØÞÝØàÐâe. à ÞáÝÞÒØ, ßÐàâØæØÞÝØàaúÕ åÐàÔ ÔØáÚa áÕ áÐáâÞjØ ÛÞÓØçÚÞÓ\n"
-"ÔeùeúÐ ÔÐ ÑØ ÞÑÕ×ÑÕÔØÛØ ßàÞáâÞà ×Ð ØÝáâÐÛÐæØjã Òaè ÝÞÒØ Mandrake Linux "
-"áØáâÕÜ.\n"
-"\n"
-"¿ÞèâÞ áÕ ÕäÕÚâØ ßàÞæÕáÐ ßÐàâØæØÞÝØàaúÐ ÞÑØçÝÞ ÝÕßÞÒàÐâÝØ,\n"
-"ßÐàâØæØÞÝØàúe ÜÞÖÕ ÑØâØ ßàØÛØçÝÞ áâàÕáÐÝ ×Ð ÝÕØáÚãáÝÕ ÚÞàØáÝØÚe.\n"
-"¾ÒÐj çÐàÞÑúÐÚ ßÞjÕÔÝÞáâÐÒùãjÕ ÞÒÐj ßàÞæÕá. ¿àÕ ßÞçÕâÚÐ, ÚÞÝáãÛâãjâÕãßãáâÒÞ\n"
-"Ø ÝÕ ÖãàØâe.\n"
-"\n"
-"\n"
-"¼ÞàÐâÕ ÔÐ ØÜÐâÕ ØÛØ ÔÐ ÚàÕØàÐâÕ ÝÐjÜaúÕ ÔÒÕ ßÐàâØæØje. JÕÔÝa jÕ ×Ð áÐÜ "
-"ÞßÕàÐâØÒÝØ áØáâÕÜ aÔàãÓa\n"
-"jÕ ×Ð ÒØàâãÕÛÝã ÜÕÜÞàØjã (çÕáâÞ áÕ ÝÐ×ØÒÐ Ø Swap).\n"
-"\n"
-"\n"
-"ÃÚÞÛØÚÞ áã ßÐàâØæØjÕ Òeû ÚàÕØàÐÝÕ (ÞÔ ßàÕÔåÞÔÝÕ ØÝáâÐÛÐæØjÕ ØÛØÚàÕØàÐÝe\n"
-"ÔàãÓØÜ aÛÐâÞÜ ×Ð ßÐàâØæØÞÝØàaúe), ÜÞàÐâÕ Ø×ÐÑàÐâØ ÝÐ ÚÞjÕ ÞÔ úØå "
-"ûÕâeØÝáâÐÛØàÐâØ \n"
-"Linux áØáâÕÜ.\n"
-"\n"
-"\n"
-"ÃÚÞÛØÚÞ ßÐàâØæØjÕ ÝØáã ÔÕäØÝØáÐÝe, ÜÐàÐâÕ ÔÐ Øå ÚàÕØàÐâe. \n"
-"´Ð ÑØ âÞ ãàÐÔØÛØ, ÜÞÖÕâÕ ÔÐ ÚÞàØáâØâÕ ÓÞàÕ ßÞáâÐÒùÕÝØ çÐàÞÑúÐÚ. à ×ÐÒØáÝÞáâØ "
-"ØÔ ÚÞÝäØÓãàÐæØje\n"
-"åÐàÔ ÔØáÚa, ßÞáâÞjØ ÝÕÚÞÛØÚÞ ÜÞÓãûÝÞáâØ:\n"
-"\n"
-"* ºÞàØáâØâÕ ßÞáâÞjeûÕ ßÐàâØæØje: çÐàÞÑúÐÚ jÕ ÔÕâÕÚâÞÒÐÞ jÕÔÝã ØÛØ ÒØèÕ "
-"ßÞáâÞjeûØåLinux ßÐàâØæØjÐ ÝÐ ÒaèÕÜ åÐàÔ ÔØáÚã. ÃÚÞÛØÚÞ\n"
-"  ÖÕÛØâÕ ÔÐ Øå ×ÐÔàÖØâÕ, Ø×ÐÑÕàØâÕ ÞÒã ÞßæØjã.\n"
-"\n"
-"\n"
-"* ±àØáaúÕ æÕÛÞÓ ÔØáÚa: ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ Ø×ÑàØèÕâÕ áÒÕ ßÞÔÐâÚÕ Ø áÒÕ "
-"ßÐàâØæØje ÚÞjØ ßÞáâÞjÕ ÝÐ ÒaèÕÜ åÐàÔ ÔØáÚã Ø ×ÐÜÕÝØâÕ Øå ÒaèØÜ\n"
-"  ÝÞÒØÜ Mandrake Linux áØáâÕÜÞÜ, ÜÞÖÕâÕ ÔÐ Ø×ÐÑÕàÕâÕ ÞÒã ÞæØjã. ±ãÔØâÕ "
-"ßaÖùØÒØáÐ ÞÒÞÜ ÞßæØjÞÜ, jÕà ÝeûÕâÕ ÑØâØ ã ÜÞÓãûÝÞáâØ\n"
-"  ÔÐ ßÞÒàÐâØâÕ áâÐàÞ áâaúe ÝÐÚÞÝ ßÞâÒàÔe.\n"
-"\n"
-"\n"
-"* ºÞàØáâØâe áÛÞÑÞÔÐÝ ßàÞáâÞà ÝÐ Windows ßÐàâØæØjØ: ãÚÞÛØÚÞ je Microsoft "
-"WindowsØÝáâÐÛØàÐÝ ÝÐ åÐàÔ ÔØáÚã Ø ×Ðã×ØÜÐ\n"
-"  áÐÒ ßàÞáâÞà, ÜÞàÐâÕ ÔÐ ÚàÕØàÐâÕ áÛÞÑÞÔÐÝ ßàÞáâÞà ×Ð Linux. ´Ð ÑØ âÞ "
-"ãàÐÔØÛØ ÜÞàÐâÕ Ø×ÑàØáÐâØ\n"
-"  Microsoft Windows ßÐàâØæØjã Ø ßÞÔÐâÚe (ßÞÓÛÕÔÐj \"±àØáaúÕ æÕÛÞÓ ÔØáÚa\" "
-"ØÛØ \"EÚáßÕàâÝØ ÜÞÔ\" àeèeúa) ØÛØ ÔÐ ßàÞÜÕÝØâÕ ÒeÛØçØÝã\n"
-"  Microsoft Windows ßÐàâØæØje. ÂÐj ßÞáâãßÐÚ áÕ ÜÞÖe Ø×ÒÕáâØ ÑÕ× "
-"ÓãÑùeúÐßÞÔÐâÐÚa. ¾ÒÞ àeèeúÕ áÕ ßàÕßÞàãçãje\n"
-"  ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ Mandrake Linux Ø Microsoft Windows ÝaØáâÞÜ "
-"ÚÞÜßjãâÕàã.\n"
-"\n"
-"\n"
-"  ¿àÕ ÝÕÓÞ Ø×ÐÑÕàÕâÕ ÞÒã ÞßæØjã, ÜÞàÐâÕ ×ÝÐâØ ÔÐ ûÕ ÒÕÛØçØÝÐMicrosoft\n"
-"  Windows ßÐàâØæØjÕ ÑØâØ ÜaúÐ ÝÕÓÞ èâÞ jÕ áÐÔa. ÂÞ ×ÝaçØ ÔÐûÕâÕ ØÜaâØ ÜaúÕ "
-"ßàÞáâÞàÐ ßÞÔ\n"
-"  Microsoft Windows-ÞÜ ×Ð ßÞÔÐâÚÕ ØÛØ ØÝáâÐÛÐæØjã ÝÞÒÞÓ áÞäâÒÕàa.\n"
-"\n"
-"\n"
-"* EÚáßÕàâÝØ ÜÞÔ: ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ àãçÝÞ ßÐàâØæØÞÝØàÐâÕ åÐàÔ ÔØáÚ, ÜÞÖÕâeÔÐ "
-"Ø×ÐÑÕàÕâÕ ÞÒã ÞßæØjã. ±ãÔØâÕ ßaÖùØÒØ ßàÕ ÝÕÓÞ\n"
-"  Ø×ÐÑÕàÕâÕ ÞÒã ßÞæØjã. ¹Õà jÕ ÞÒÞ ÔÞÑàÐ ÐÛØ Ø ÞßÐáÝÐ áâÒÐà. ¼ÞÖÕâeÛÐÚÞ "
-"Ø×ÓãÑØâØ áÒÕ ßÞÔÐâÚe. ´ÐÚÛe,\n"
-"  ÝÕÜÞjâÕ ÑØàÐâØ ÞÒã ÞßæØjã ãÚÞÛØÚÞ ÝÕ ×ÝÐâÕ èâÐ àÐÔØâÕ."
-
-#: ../../help.pm_.c:347
-#, fuzzy
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"¸ áâØÓÛØ áâÕ. ¸ÝáâÐÛÐæØøÐ øÕ áÐÔÐ ×ÐÒàèÕÝÐ Ø ÒÐè GNU/Linux áØáâÕÜ øÕ \n"
-"áßàÕÜÐÝ ×Ð ãßÞâàÕÑã. ÁÐÜÞ ÚÛØÚÝØâÕ ÝÐ Ã àÕÔã ØÛØ \"OK\" ÔÐ ÑØ àÕáâÐàâÞÒÐÛØ "
-"áØáâÕÜ. ¼ÞÖÕâÕ ßÞÚàÕÝãâØ\n"
-"GNU/Linux ØÛØ Windows, èâÐ ÓÞÔ ÒØèÕ ßàÕäÕàØàÐâÕ (ãÚÞÛØÚÞ ØÜÐâÕ ØÝáâÐÛØàÐÝÐ "
-"ÔÒÐ áØáâÕÜÐ), çØÜ\n"
-"sáÕ àÐçãÝÐà ßÞÝÞÒÞ ßÞÚàÕÝÕ.\n"
-"\n"
-"ÂÐáâÕà ½ÐßàÕÔÝÞ \"Advanced\" (áÐÜÞ ã µÚáßÕàâ ÜÞÔã) ßàØÚÐ×ãøÕ øÞè ÔÒÐ âÐáâÕàÐ "
-"×Ð:\n"
-"\n"
-" * \"ÚàÕØàÐúÕ ÐãâÞ-ØÝáâÐÛÐæØÞÝÕ ÔØáÚÕâÕ\": àÐÔØ ÚàÕØàÐúÐ ØÝáâÐÛÐæØÞÝÞÓ äÛÞßØ "
-"ÔØáÚÐ\n"
-"ÚÞøØ ûÕ ÐãâÞÜÐâáÚØ ßÞÚàÕÝãâØ æÕÛã ØÝáâÐÛÐæØøã ÑÕ× ßÞÜÞûØ ÞßÕàÐâÞàÐ\n"
-", áÛØçÝÞ ÞÒÞø ØÝáâÐÛÐæØøØ ÚÞøã áâÕ ãßàÐÒÞ Ø×ÒÕÛØ.\n"
-"\n"
-"   ¼ÞÖÕâÕ ßàØÜÕâØâØ ÔÐ áã ÔÒÕ àÐ×ÛØçØâÕ ÞßæØøÕ ÔÞáâãßÝÕ ÝÐÚÞÝ ßàØâØáÚÐ ÝÐ "
-"âÐáâÕà:\n"
-"\n"
-"    * \"áÐ ßÞÝÐÒùÐúÕÜ\". ¾ÒÞ øÕ ÔÕÛÞÜ ÐãâÞÜÐâØ×ØàÐÝÐ ØÝáâÐÛÐæØøÐ øÕà ÚÞàÐÚ "
-"áÐ\n"
-"ßÐàâØæØÞÝØàÐúÕÜ ÔØáÚÐ ÞáâÐøÕ ØÝâÕàÐÚâØÒÐÝ (áÐÜÞ ÞÝ).\n"
-"\n"
-"    * \"°ãâÞÜÐâØ×ÞÒÐÝÞ\". ¿ÞâßãÝÞ ÐãâÞÜÐâØ×ÞÒÐÝÐ ØÝáâÐÛÐæØøÐ: åÐàÔ ÔØáÚ áÕ ã "
-"ßÞâßãÝÞáâØ\n"
-"äÞàÜÐâØ×ãøÕ, Ø áÒØ ßÞÔÐæØ ûÕ ÑØâØ Ø×ÓãÑùÕÝØ.\n"
-"\n"
-"   ¾ÒÐ ÞßæØøÐ øÕ ÒÕÞÜÐ ÚÞàØáÝÐ ãÚÞÛØÚÞ Ø×ÒÞÔØâÕ ÒÕÛØÚØ ÑàÞø áÛØçÝØå "
-"ØÝáâÐÛÐæØøÐ\n"
-"ÝÐ ÒÕûÕÜ ÑàÞøã ÜÐèØÝÐ. ¿ÞÓÛÕÔÐøâÕ áÕÚæØøã Þ ÐãâÞ ØÝáâÐÛÐæØøØ ÝÐ ÝÐèÕÜ web "
-"áÐøâã.\n"
-"\n"
-" * \"ÁÐèãÒÐø áÕÛÕÚæØøã ßÐÚÕâÐ\"(*) : áÝØÜÐ áÕÛÕÚæØøã ßÐÚÕâÐ ÚÞøØ áâÕ\n"
-"ÝÐßàÐÒØÛØ ã ÞÒÞø ØÝáâÐÛÐæØøØ. ÂÐÚÞ, ÔÐ ÚÐÔÐ ÑãÔÕâÕ Ø×ÒÞÔØÛØ ÔàãÓã "
-"ØÝáâÐÛÐæØøã, ãÑÐæØâÕ ÔØáÚÕâã\n"
-"Ø ßÞÚàÕÝÕâÕ ßÞÜÞûÝØ ÕÚàÐÝ ßàØâØáÚÞÜ ÝÐ\n"
-"[F1] âÐáâÕà, Ø ×ÐåâÕÒÞÜ ×Ð >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) ¼ÞàÐâÕ ÔÐ ØÐÜâÕ  FAT-äÞàÜÐâØàÐÝã ÔØáÚÕâã (ÔÐ ÑØ øÕ äÞàÜÐâØàÐÛØ ßÞÔ GNU/"
-"Linux-ÞÜ, ãÚãæÐøâÕ\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"ÁÒÐÚÐ ßÐàâØæØjÐ ÚÞjÐ jÕ ÝÞÒÞÔÕäØÝØáÐÝÐ ÜÞàa ÑØâØ\n"
-"äÞàÜÐâØàÐÝÐ ×Ð ãßâàÕÑã (äÞàÜÐâØàaúÕ ×ÝÐçØ ÚàÕØàaúÕ ÔÐâÞâeçÝÞÓ(äÐjÛ) "
-"áØáâÕÜa).\n"
-"\n"
-"ÁaÔÐ ÜÞÖÔÐ ÖÕÛØâÕ ÔÐ àÕäÞàÜÐâØàÐâÕ ßÞáâÞjeûÕ ßÐàâØæØje ÔÐ ÑØ Ø×ÑàØáÐÛØ\n"
-"ßÞÔÐâÚÕ ÚÞjÕ áÐÔàÖÕ. ÃÚÞÛØÚÞ ÖÕÛØâÕ âÞ, Ø×ÐÑÕàØâÕ ßÐàâØæØjÕ \n"
-"ÚÞjÕ ÖÕÛØâÕ ÔÐ äÞàÜÐâØ×ãjÕâe.\n"
-"\n"
-"\n"
-"·ÐßÐÜâØâÕ ÔÐ ÝØjÕ ßÞâàÕÑÝÞ ÔÐ àÕäÞàÜÐâØàÐâÕ áÒÕ ßÞáâÞjeûÕ ßÐàâØæØje.\n"
-"¼ÞàÐâÕ ÔÐ àÕäÞàÜÐâØàÐâÕ ßÐàâØæØjÕ ÚÞjÕ áÐÔàÖÕ ÞßÕàÐâØÒÝØ áØáâÕÜ (ÚÐÞ èâÞ áã "
-"\"/\",\n"
-"\"/usr\" ØÛØ  \"/var\") ÐÛØ ÝÕ ÜÞàÐâÕ ÔÐ àÕäÞàÜÐâØàÐâÕ ßÐàâØæØjÕ ÚÞjÕ áÐÔàÖÕ "
-"ßÞÔÐâÚe\n"
-"ÚÞjÕ ÖÕÛØâÕ ÔÐ ×ÐÔàÖØâe (ÞÑØçÝÞ /home).\n"
-"\n"
-"\n"
-"¿Ð×ØâÕ ßàØ ÑØàaúã ßÐàâØæØja, ßÞáÛÕ äÞàÜÐâØàaúa, áÒ ßÞÔÐæØ ûÕ \n"
-"ÑØâØ Ø×ÑàØáÐÝØ Ø ÝeûÕâÕ Øå ÜÞûØ ßÞÒàÐâØâØ.\n"
-"\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ \"à àÕÔã\" ÚÐÔÐ ÑãÔÕâÕ áßàÕÝØ ×Ð äÞàÜÐâØàaúÕ ßÐàâØæØja.\n"
-"\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ  \"¿ÞÝØèâØ\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ Ø×ÐÑÕàÕÕâÕ ÔàãÓÕ ßÐàâØæØjÕ ×Ð "
-"ØÝáâÐÛÐæØjã ÝÞÒÞÓ\n"
-"Mandrake Linux ÞßÕàÐâØÒÝÞÓ áØáâÕÜa. ºÛØÚÝØâÕ ÝÐ \"½ÐßàÕÔÝÞ\" ãÚÞÛØÚÞ ÖÕÛØâÕ "
-"ÔÐ Ø×ÐÑÕàÕâÕ ßÐàâØæØøÕ ÚÞøÕ ûÕ ÑØâØ ßàÞÒÕàÕÝÕ\n"
-"ÞÔ ÛÞèØå ÑÛÞÚÞÒÐ ÝÐ ÔØáÚã."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"²aè ÝÞÒØ Mandrake Linux ÞßÕàÐâØÒÝØ áØáâÕÜ áÕ âàÕÝãâÝÞ ØÝáâÐÛØàa.\n"
-"¾ÒÐ ÞßÕàÐæØjÐ ÑØ âàÕÑÐÛÐ ÔÐ ßÞâàÐjÕ ÝÕÚÞÛØÚÞ ÜØÝãâa (ã ×ÐÒØáÝÞáâØ ÞÔ "
-"ÒÕÛØçØÝeßÐÚÕâÐ ÚÞjØ áÕ ØÝáâÐÛØàÐjã Ø Ñà×ØÝÕ ÒaèÕÓ ÚÞÜßjãâÕàa).\n"
-"\n"
-"¼ÞÛØÜ ²Ðá ×Ð áâàßùeúe.ÅÒÐÛa."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"¿àÕ ÝÕÓÞ èâÞ ÝÐáâÐÒØâÕ ßÐÖùØÒÞ ßàÞçØâÐøâÕ ãáÛÞÒÕ ÛØæÕÝæÕ. ¾ÝÐ\n"
-"ßÞÚàØÒÐ æÕÛã Mandrake Linux ÔØáâàØÑãæØøã, Ø ãÚÞÛØÚÞ áÕ ÝÕ áÛÐÖÕâÕ\n"
-"áÐ áÒØÜ ãáÛÞÒØÜÐ ÚÞøØ áÕ ÝÐÛÐ×Õ ã úÞø, ÚÛØÚÝØâÕ ÝÐ \"¾ÔÑØøÐÜ\" âÐáâÕà ÚÞøØ "
-"ûÕ ÞÔÜÐå\n"
-"×ÐãáâÐÒØâØ ØÝáâÐÛÐæØøã. ´Ð ÑØ ÝÐáâÐÒØÛØ áÐ ØÝáâÐÛÐæØøÞÜ, ÚÛØÚÝØâÕ \n"
-"âÐáâÕà \"¿àØåÒÐâÐÜ\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"½Ð ÞÒÞÜ ÜÕáâã, ÒàÕÜÕ øÕ ÔÐ Ø×ÐÑÕàÕâÕ ÖÕùÕÝØ ÝØÒÞ áØÓãàÝÞáâØ ×Ð ÒÐèã\n"
-"ÜÐèØÝã. ºÐÚÞ ßàÐÒØÛÞ ÝÐÛÐÖÕ, èâÞ øÕ ÜÐèØÝÐ ÒØèÕ Ø×ÛÞÖÕÝÐ, Ø èâÞ øÕ ÒØèÕ\n"
-"ßÞÔÐâÐÚÐ ÚÞøØ áã ãÑÐçÕÝØ ×ÝÐçÐøÝØøØ, ÜÞàÐ ÑØâØ Ø ÒÕûØ ÝØÒÞ áØÓãàÝÞáâØ.\n"
-"¸ßÐÚ, ÒÕûØ ÝØÒÞ áØÓãàÝÞáâØ ØÔÐ ÝÐ ãèâàÑ Ñà×ØÝÕ Ø\n"
-"ÛÐÚÞûÕ ãßÞâàÕÑÕ. ¿ÞÓÛÕÔÐøâÕ MSEC ßÞÓÛÐÒùÕ ã ``ÃßãáâÒã'' ÔÐ\n"
-"ÑØ ÔÞÑØÛØ ÒØèÕ ØÝäÞàÜÐæØøÐ Þ ×ÝÐçÕúã ÞÒØå ÝØÒÞÐ.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÝÕ ×ÝÐâÕ èâÐ ÔÐ Ø×ÐÑÕàÕâÕ, ÞáâÐÝØâÕ ÝÐ default ÞßæØøØ."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"½Ð ÞÒÞj âaçÚØ, ÜÞàÐâÕ Ø×ÑàÐâØ ÚÞjã ßÐàâØæØjã(e) ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ×Ð\n"
-"ØÝáâÐÛÐæØjã ÝÞÒÞÓ Mandrake Linux áØáâÕÜa. ÃÚÞÛØÚÞ áã ßÐàâØæØje\n"
-"Òeû ÔÕäØÝØáÐÝÕ (ÞÔ ßàÕÔåÞÔÝÕ ØÝáâÐÛÐæØjÕ ØÛØ ÞÔ áâàÐÝe\n"
-"ÔàãÓÞÓ ÐÛÐâÐ ×Ð ßÐàâØæØje), ÜÞÖÕâÕ ÔÐ ÚÞàØáâØâÕ ßÞáâÞjeûÕ ßÐàâØæØje. à "
-"ÔàãÓØÜ áÛãçÐjÕÒØÜa,\n"
-"åÐàÔ ÔØáÚ ßÐàâØæØjÕ ÜÞàÐjã ÑØâØ ÔÕäØÝØáÐÝe.\n"
-"\n"
-"´Ð ÑØ ÚàÕØàÐÛØ ßÐàâØæØjÕ, ÜÞàÐâÕ ßàÒÞ Ø×ÐÑàÐâØ åÐàÔ ÔØáÚ. ¼ÞÖÕâÕ Ø×ÐÑàÐâØ\n"
-"ÔØáÚ ×Ð ßÐàâØæØÞÝØàaúÕ ÚÛØÚÞÜ ÝÐ \"hda\" ×Ð ßàÒØ IDE ÔØáÚ, \"hdb\" ØÛØ \n"
-"×Ð ÔàãÓØ ØÛØ \"sda\" ×Ð ßàÒØ SCSI ÔØáÚ ØâÔ.\n"
-"\n"
-"·Ð ßÐàâØæØÞÝØàaúÕ áÕÛÕÚâÞÒÐÝÞÓ åÐàÔ ÔØáÚÐ, ÜÞÖÕâÕ ÚÞàØáâØâØ áÛÕÔeûÕ ÞßæØje:\n"
-"\n"
-"   * \"¾çØáâØ áÒÕ\": ÞÒÐ ÞßæØjÐ ÑàØèÕ áÒÕ ßÐàâØæØjÕ ÝÐ Ø×ÐÑàÐÝÞÜ åÐàÔ "
-"ÔØáÚã.\n"
-"\n"
-"   * \"Auto ÐÛÞæØàaúe\": ÞÒÐ ÞßæØjÐ ÔÞ×ÒÞùÐÒÐ ÔÐ ÐãâÞÜÐâáÚØ ÚàÕØàÐâÕ  Ext2 Ø "
-"swap ßÐàâØæØjÕ ÝÐ áÛÞÑÞÔÝÞÜ ßàÞáâÞàã \n"
-"     åÐàÔ ÔØáÚa.\n"
-"\n"
-"   * \"ÁßÐáØ âÐÑÕÛã ßÐàâØæØja\": ãÚÞÛØÚÞ je ÒaèÐ âÐÑÕÛÐ ßÐàâØæØjÐ ÞèâeûÕÝÐ, "
-"ÜÞÖÕâÕ ÔÐ ßàÞÑÐâe ÔÐ jÕ ÞßÞàÐÒØâÕ ÚÞàØáâeûØ ÞÒã ÞßæØjã. ±ãÔØâÕ\n"
-"     ßaÖùØÒØ Ø ×ÝÐjâÕ ÔÐ ÜÞÖÕ ÔÐ Ø ÝÕ ãáße.\n"
-"\n"
-"   * \"²àÐâØ ÝÐ áâÐàÞ\": ÞÒÐ ÞßæØjÐ ûÕ ßÞÝØèâØâØ Ø×ÜÕÝã.\n"
-"\n"
-"   * \"¿ÞÝÞÒÝÞ ãçØâÐÒaúe\": ÞÒã ÞßæØjã ÜÞÖÕâÕ ÚÞàØáâØâØ ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ "
-"ßÞÝØèâØâØáÒÕ ßàÞÜÕÝe Ø ãçØâÐâÕ ØÝØæØjÐÛÝã âÐÑÕÛã ßÐàâØæØja\n"
-"\n"
-"   * \"ÇÐàÞÑúÐÚ\": ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ çÐàÞÑúÐÚa ×Ð ßÐàâØæØÞÝØàaúe "
-"åÐàÔ ÔØáÚa, Ø×ÐÑÕàØâe ÞÒã ÞßæØjã. ¿àÕßÞàãçÕÝa jÕ ãÚÞØÚÞ\n"
-"     ÝÕÜÐâÕ ÜÝÞÓÞ ×ÝaúÐ Þ ßÐàâæØjÐÜa.\n"
-"\n"
-"   * \"¿ÞÒàÐâØ áÐ ÔØáÚÕâe\": ãÚÞÛØÚÞ áâÕ áÝØÜØÛØ âÐÑÕÛã ßÐàâØæØjÐ ÝÐ "
-"ÔØáÚÕâã  âÞÚÞÜ ßàÕâåÞÔÝÕ ØÝáâÐÛÐæØje, ÜÞÖÕâÕ je\n"
-"     ÒàÐâØâØ áÐ ÞÒÞÜ ÞßæØjÞÜ.\n"
-"\n"
-"   * \"ÁÝØÜØ ÝÐ ÔØáÚÕâã\": ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÔÐ áÝØÜØâÕ âÐÑÕÛã ßÐàâØæØja ÝÐ "
-"ÔØáÚÕâã Ôa ÑØ ÜÞÓÛØ ÚÐáÝØjÕ ÔÐ jÕ ßÞÒàÐâØâe, ÜÞÖÕâÕ ÔÐ ØáÚÞàØáâØâe\n"
-"     ÞÒã ÞßæØjã. ½ÐàÞçØâÞ ßàÕßÞàãçãjÕÜÞ ÞÒã ÞßæØjã\n"
-"\n"
-"   * \"ÃàaòÕÝÞ\": ÚÐÔÐ ×ÐÒàèØâÕ áÐ ßÐàâØæØÞÝØàaúÕÜ åÐàÔ ÔØáÚÐ, ØáÚÞàØáâØâÕ "
-"ÞÒã ÞßæØjã ÔÐ ÑØ áÝØÜØÛØ ßàÞÜÕÝe.\n"
-"\n"
-"·Ð ÒØèÕ ØÝäÞàÜÐæØja, ÜÞÖÕâÕ ×Ð áÒÐÚã ÞæßØjã  ÔÞÑØâØ ÚàÕâaúÕÜ ßÞÜÞûã "
-"âÐáâÐâãàe: ÝÐÒØÓÐæØjÞÜ ÚàÞ× ßÐàâØæØjÕ ßÞÜÞûã [Tab] âÐáâÕàa Ø [Up/Down] "
-"áâàÕÛØæa.\n"
-"\n"
-"ºÐÔÐ jÕ ßÐàâØæØjÐ Ø×ÐÑàÐÝa, ÜÞÖÕâÕ ÚÞàØáâØâØ:\n"
-"\n"
-" * Ctrl-c ×Ð ÚàÕØàaúÕ ÝÞÒÕ ßÐàâØæØje (ÚÐÔÐ jÕ Ø×ÐÑàÐÝÐ ßàÐ×ÝÐ ßÐàâØæØja);\n"
-"\n"
-" * Ctrl-d ×Ð ÑàØáaúÕ ßÐàâØæØje;\n"
-"\n"
-" * Ctrl-m ×Ð ßÞáâÐÒùaúÕ âaçÚÕ ÜÞÝâØàaúa.\n"
-"\n"
-"ÃÚÞÛØÚÞ àÐÔØâÕ ØÝáâÐÛÐæØjã Ýa PPC ¼aèØÝã, ÜÞÖÔÐ ûÕâÕ ÖÕÛÕâØ ÔÐ ÚàÕØàÐâe "
-"ÜÐÛã\n"
-"HFS 'bootstrap' ßÐàâØæØjã ÞÔ ÝÐjÜaúÕ 1MB ×Ð ãßÞâàÕÑã\n"
-"yaboot áâÐàâÕàa. ÃÚÞÛØÚÞ áÕ ÔÒÞãÜØâÕ ÔÐ ÞÒã ßÐàâØæØjã ÝÐßàÐÒØâÕ ÜÐÛÞ ÒeûÞÜ,\n"
-"ÝÐ ßàØÜÕà 50MB, ÜÞÖÕâÕ ØáÚÞàØáâØâØ âÐj ßàÞáâÞà ×Ð áÜeèâaúÕ\n"
-"àÕ×ÕàÒÝÞÓ ÚÕàÝÕÛÐ Ø ramdisk image ×Ð áâÐàâaúÕ ã åØâÝØÜ áØâãÐæØjÐÜa."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"JÕÔÝÐ ØÛØ ÒØèÕ ¼icrosoft Windows ßÐàâØæØjÐ jÕ ÔÕâÕÚâÞÒÐÝÞ \n"
-"ÝÐ åÐàÔ ÔØáÚã. ¸×ÐÑÕàØâÕ ÚÞjã ÞÔ úØå ÖÕÛØâÕ ÔÐ áÜaúØâÕ ÔÐ ÑØ ØÝáâÐÛØàÐÛØ\n"
-"ÝÞÒØ Mandrake Linux ÞßÕàÐâØÒÝØ áØáâÕÜ.\n"
-"\n"
-"ÁÒÐÚÐ ßÐàâØæØjÐ jÕ ØáßØáÐÝÐ ÝÐ áÛÕÔeûØ ÝaçØÝ: \"¸ÜÕ Linux-a\",\"¸Üe Windows-a"
-"\"\n"
-"\"ºÐßÐæØâÕâ\".\n"
-"\n"
-"\"¸ÜÕ Linux-a\" je ÚÞÔØàÐÝÞ ÝÐ áÛÕÔeûØ ÝaçØÝ: \"âØß åÐàÔ ÔØáÚa\", \"ÑàÞj "
-"åÐàÔ ÔØáÚa\",\n"
-"\"ÑàÞj ßÐàâØæØje\" (ÝÐ ßàØÜÕà, \"hda1\").\n"
-"\n"
-"\"ÂØß åÐàÔ ÔØáÚa\" je \"hd\" ãÚÞÛØÚÞ je åÐàÔ ÔØáÚ ID ãàÕòÐø Ø \"sd\"\n"
-"ãÚÞÛØÚÞ jÕ SCSI åÐàÔ ÔØáÚ.\n"
-"\n"
-"\"±àÞj åÐàÔ ÔØáÚa\" je ãÒÕÚ áÛÞÒÞ ßÞáÛÕ \"hd\" ØÛØ \"sd\". Áa IDE åÐàÔ "
-"ÔØáÚÞÒØÜa:\n"
-"\n"
-" * \"a\" ×ÝaçØ  \"master åÐàÔ ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ  IDE ÚÞÝâàÞÛÕàã\",\n"
-"\n"
-" * \"b\" ×ÝaçØ \"slave åÐàÔ ÔØáÚ ÝÐ ßàØÜÐàÝÞÜ IDE ÚÞÝâàÞÛÞÕàã\",\n"
-"\n"
-" * \"c\" ×ÝaçØ \"master åÐàÔ ÔØáÚ ÝÐ áÕÚãÝÔàÐÝÞÜ IDE ÚÞÝâàÞÛÞÕàã\",\n"
-"\n"
-" * \"d\" ×ÝaçØ \"slave åÐàÔ ÔØáÚ ÝÐ áÕÚãÝÔÐàÝÞÜ IDE ÚÞÝâàÞÛÕàã\".\n"
-"\n"
-"ÁÐ SCSI åÐàÔ ÔØáÚÞÒØÜa, \"a\" ×ÝaçØ \"ßàØÜÐàÝØ åÐàÔ ÔØáÚ\", a \"b\" ×ÝaçØ "
-"\"áÕÚãÝÔÐàÝØ åÐàÔ ÔØáÚ \", ØâÔ.\n"
-"\n"
-"\"¸ÜÕ Windows-a\" jÕ áÛÞÒÞ åÐàÔ ÔØáÚÐ ßÞÔ Windows-ÞÜ (ßàÒØ ÔØáÚ\n"
-"ØÛØ ßÐàâØæØja áÕ ×ÞÒÕ \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "±ãÔØâÕ áâàßùØÒØ.ÂàÐjaúÕ ÞÒØå ÞÕàÐæØjÐ ÜÞÖÕ ÑØâØ ÝÕÚÞÛØÚÞ ÜØÝãâa"
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX áÐÔÐ âàÕÑÐ ÔÐ ×ÝÐ ÔÐ ÛØ ÖÕÛØâÕ ÔÐ ßÞÚàÕÝÕâÕ default (\"¿àÕßÞàãçÕÝÞ\")\n"
-"ØÝáâÐÛÐæØøã ØÛØ ÖÕÛØâÕ ÔÐ ØÜÐâÕ ÒÕûã ÚÞÝâàÞÛã (\"µÚáßÕàâ\"). ÂÐÚÞòÕ\n"
-"ØÐÜâÕ Ø ßàÐÒÞ Ø×ÑÞàÐ ßÞÚàÕâÐúÐ ÝÞÒÕ ØÝáâÐÛÐæØøÕ ØÛØ ÐÖãàØàÐúÐ ßÞáâÞøÕûÕÓ\n"
-"Mandrake Linux áØáâÕÜÐ:\n"
-"\n"
-" * ÚÞÜßÕÛâÝÞ ãÚÛÐúÐ áâÐàØ áØáâÕÜ\n"
-"\n"
-" *\n"
-"\n"
-" *\n"
-"\n"
-"ÁÐ ÔàãÓÕ áâàÐÝÕ, \"°ÖãàØàÐúÕ\" ÒÐÜ ÔÞ×ÞÒÞùÐÒÐ ÝÐÔÞÓàÐÔúã ßÞáâÞøÕûÕÓ "
-"áØáâÕÜÐ.\n"
-"ºÞÝÐçÝÞ, Ø×ÐÑÕàØâÕ \"°ÖãàØàÐúÕ ßÐÚÕâÐ\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÐÖãàØàÐâÕ\n"
-"ßÐÚÕâÕ áÐ ßàÕâåÞÔÝÕ ØÝáâÐÛÐæØøÕ, ÑÕ× ÔàãÓØå Ø×ÜÕÝÐ.\n"
-"\n"
-"¸×ÐÑÕàØâÕ  \"¸ÝáâÐÛÐæØja\" ãÚÞÛØÚÞ ÝÕÜÐ ßàÕâåÞÔÝÕ ÒÕà×ØjÕMandrake Linux\n"
-"ÚÞjÐ jÕ ØÝáâÐÛØàÐÝÐ ØÛØ åÞûÕâÕ ÔÐ ÚÞàØáâØâÕ ÒØèÕ ÞßÕàÐâØÒÝØå áØáâÕÜa.\n"
-"\n"
-"¸×ÐÑÕàØâe \"AÖãàØàaúe\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ aÖãàØàaâÕ ßÞáâÞjeûã ÒÕà×Øjã "
-"Mandrake Linux-a.\n"
-"\n"
-"à ×ÐÒØáÝÞáâØ ÞÔ ÒaèÕÓ ßÞ×ÝÐÒaúÐ GNU/Linux-a, ÜÞÖÕâÕ Ø×ÐÑàÐâØ jÕÔÝã ÞÔ "
-"áÛÕÔeûØå ÝØÒÞÐ ×Ð ØÝáâÐÛÐæØjã ØÛØ aÖãàØàaúÕ\n"
-"Mandrake Linux ÞßÕàÐâØÒÝÞÓ áØáâÕÜa:\n"
-"\n"
-"* ¿àÕßÞàãçÕÝÞ: ãÚÞÛØÚÞ ÝØÐÚÐÔÐ ÝØáâÕ ØÝáâÐÛØàÐÛØ  GNU/Linux ÞßÕàÐâØÒÝØ "
-"áØáâÕÜ Ø×ÐÑÕàØâÕ ÞÒÞ. ¸ÝáâÐÛÐæØjÐ ûÕ ÑØâØ\n"
-"  ÒÕÞÜÐ ÛÐÚÐ Ø ØÜaûÕâÕ ÔÐ ÞÔÓÞÒÞàØâÕ ÝÐ áÒÕÓÐ ÝÕÚÞÛØÚÞ ßØâaúa.\n"
-"\n"
-"* µÚáßÕàâ: ãÚÞÛØÚÞ ØÐÜâÕ ÔÞÑàÞ ×ÝaúÕ Þ GNU/Linux-ã, ÜÞÖÕâÕ Ø×ÐÑàÐâØ ÞÒã "
-"ØÝáâÐÛÐæØÞÝã ÚÛÐáã. ºÐÞ Ø \"ÁÐ ßÞÔeèÐÒaúÕÜ\"\n"
-"ØÝáâÐÛÐæØÞÝÞj ÚÛÐáØ, ÜÞûØ ûÕâÕ ÔÐ ÑØàÐâÕ ßàØÜÐàÝã ÝÐÜÕÝã (àÐÔÝÐ áâÐÝØæÐ, "
-"áÕàÒÕà, àÐ×ÒÞjÝÐ áâÐÝØæa). ±ãÔØâÕ ÒÕÞÜa\n"
-"ßaÖùØÒØ ßàÕ Ø×ÑÞàÐ ÞÒÕ ØÝáâÐÛÐæØÞÝÕ ÚÛÐáÕ. ¼ÞûØ ûÕâÕ ÔÐ Ø×ÒÞÔØâÕ ÒÕÞÜÐ\n"
-"ßÞÔÕáØÒã ØÝáâÐÛÐæØjã.\n"
-"¾ÔÓÞÒÞàØ ÝÐ ÝÕÚÐ ßØâaúÐ ÜÞÓã ÑØâØ ÒÕÞÜÐ âeèÚØ ãÚÞÛØÚÞ ÝÕÜÐâÕ ÔÞÑàÞ ×ÝaúÕ Þ\n"
-"GNU/Linux-ã. ´ÐÚÛe, ÝÕÜÞjâÕ ÑØàÐâØ \n"
-"ÞÒã ØÝáâÐÛÐæØÞÝã ÚÐáã ãÚÞÛØÚÞ ÝÕ ×ÝÐâÕ èâÐ àÐÔØâe."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"à ßàØÝæØßã, DrakX ÑØàÐ ÔÕáÝã âÐáâÐâãàã ×Ð ÒÐá (ã ×ÐÒØáÝÞáâØ ÞÔ âÞÓÐ ÚÞøØ\n"
-"áâÕ øÕ×ØÚ Ø×ÐÑàÐÛØ) Ø çÐÚ Ø ÝÕûÕâÕ ÒØÔÕâØ ÞÒÐø ÚÞàÐÚ. ¸ßÐÚ, ÜÞÖÕ\n"
-"áÕ ÔÕáØâØ ÔÐ ÝØáâÕ ÔÞÑØÛØ âÐáâÐâãàã ÚÞøÐ ÞÔÓÞÒÐàÐ ÒÐèÕÜ øÕ×ØÚã: ÝÐ\n"
-"ßàØÜÕà, ãÚÞÛØÚÞ áâÕ ÈÒÐøæÐàÐæ ÚÞøØ ÓÞÒÞàØ ÕÝÓÛÕáÚØ, ÒÕàÞÒÐâÝÞ ûÕâÕ ÖÕÛÕâØ\n"
-"ÈÒÐøæÐàáÚã âÐáâÐâãàã. ¸ÛØ ãÚÞÛØÚÞ ÓÞÒÞàØâÕ µÝÓÛÕáÚØ ÐÛØ áÕ ÝÐÛÐ×ØâÕ\n"
-"ã ºÒÕÑÕÚã, ÜÞÖÕâÕ áÕ ÝÐûØ ã ØáâÞø áØâãÐæØøØ. à ÞÑÐ\n"
-"áÛãçÐøÐ, ÜÞàÐûÕâÕ ÔÐ áÕ ÒàÐâØâÕ ÝÐ ÞÒÐø ØÝáâÐÛÐæØÞÝØ ÚÞàÐÚ Ø Ø×ÐÑÕàÕâÕ\n"
-"ÞÔÓÞÒÐàÐøãûã âÐáâÐâãàã áÐ ÛØáâÕ.\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ âÐáâÕà \"¨Þè\" ÔÐ ÑØ ÔÞÑØÛØ ÚÞÜßÛÕâÝã ÛØáâã\n"
-"ßÞÔàÖÐÝØå âÐáâÐâãàÐ."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"¸×ÐÑÕàØâÕ ÒÐè øÕ×ØÚ ×Ð ØÝáâÐÛÐæØøã Ø ÚÞàØèûÕúÕ áØáâÕÜÐ.\n"
-"\n"
-"ºÛØÚÞÜ ÝÐ âÐáâÕà \"½ÐßàÕÔÝÞ\" ÞÜÞÓãûØûÕâÕ áÕÑØ ÔÐ ÒØÔØâÕ ÔàãÓÕ\n"
-"øÕ×ØÚÕ ÚÞøÕ ÜÞÖÕâÕ ØÝáâÐÛØàÐâØ ÝÐ ÒÐèã àÐÔÝã áâàÐÝØæã. ±ØàÐúÕÜ ÔàãÓØå "
-"øÕ×ØÚÐ\n"
-"ûÕâÕ ØÝáâÐÛØàÐâØ äÐøÛÞÒÕ ÒÕ×ÐÝÕ (×Ð áßÕæØäØæØàÐÝÕ øÕ×ØÚÕ) ×Ð ÔÞÚãÜÕÝâÐæØøã "
-"Ø\n"
-"ÐßÛØÚÐæØøÕ. ½Ð ßàØÜÕà, ãÚÞÛØÚÞ ûÕ ÝÐ ÒÐèÕÜ àÐçãÝÐàã åÞáâÞÒÐâØ ÚÞàØáÝØæØ Ø× "
-"ÈßÐÝØøÕ\n"
-"Ø×ÐÑÕàØâÕ µÝÓÛÕáÚØ ÚÐÞ ÓÛÐÒÝØ Ð ÝÐ áâÐÑÛã\n"
-"Þ×ÝÐçØâÕ Ø \"ÈßÐÝØáÚØ|ÈßÐÝØøÐ\".\n"
-"\n"
-"·ÐßÐÜâØâÕ ÔÐ ÜÞÖÕâÕ ØÝáâÐÛØàÐâØ ÒØèÕ øÕ×ØÚÐ. ºÐÔÐ Ø×ÐÑÕàÕâÕ áÒÕ ÖÕùÕÝÕ\n"
-"ÔÞÔÐâÝÕ ÛÞÚÐÛØ×ÐæØøÕ ÚÛØÚÝØâÕ ÝÐ âÐáâÕà \"à àÕÔã\" ÔÐ ÑØ ÝÐáâÐÒØÛØ."
-
-#: ../../help.pm_.c:609
-#, fuzzy
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"¿Þ default-ã, DrakX ßàÕâßÞáâÐÒùÐ ÔÐ ØÜÐâÕ ÜØèÐ áÐ ÔÒÐ âÐáâÕàÐ Ø ßÞÔÕáØûÕ\n"
-"ÕÜãÛÐæØøã âàÕûÕÓ âÐáâÕàÐ. DrakX ûÕ ÐãâÞÜÐâáÚØ ßàÕßÞ×ÝÐâØ ÔÐ ÛØ áÕ àÐÔØ Þ\n"
-"PS/2, áÕàØøáÚØ ØÛØ USB ÜØèã.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ áßÕæØäØæØàÐâÕ ÔàãÓØ âØß ÜØèÐ ÞÔÐÑÕàØâÕ ÞÔÓÞÒÐàÐøãûØ\n"
-"âØß áÐ ÛØáâÕ.\n"
-"\n"
-"ÃÚÞÛØÚÞ Ø×ÑÕàÕâÕ ÜØèÐ ÚÞøØ áÕ àÐ×ÛØÚãøÕ ÞÔ default-Ð ßÞøÐÒØûÕ ÒÐÜ áÕ\n"
-"âÕáâ ÕÚàÐÝ. ºÞàØáâØâÕ âÐáâÕàÕ Ø âÞçÚØûÕ ÔÐ ÑØ ßàÞÒÕàØÛØ ÔÐ ÛØ áã ßÞáâÐÒÚÕ\n"
-"ÔÞÑàÕ. ÃÚÞÛØÚÞ ÜØè ÝÕ àÐÔØ ØáßàÐÒÝÞ ßàØâØáÝØâÕ  âÐáâÕà ×Ð àÐ×ÝÜÐÚ (space "
-"bar) ØÛØ\n"
-"âÐáâÕà RETURN ×Ð \"¿ÞÝØèâØ\" Ø Ø×ÐÑÕàØâÕ ßÞÝÞÒÞ."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"¼ÞÛØÜ, Ø×ÐÑÕàØâÕ ÞÔÓÞÒÐàÐøãûØ ßÞàâ. ½Ð ßàØÜÕà, COM1 ßÞàâ ßÞÔ MS Windows-ÞÜ\n"
-" ã Linux-ã ØÜÐ Þ×ÝÐÚã ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"¾ÒÞ øÕ ÝÐø×ÐÝÐçÐøÝØøÐ âÐçÚÐ ã ÞÔÛãçØÒÐúã Þ áØÓãàÝÞáâØ ÒÐèÕÓ GNU/Linux\n"
-"áØáâÕÜÐ: ÜÞàÐâÕ ÔÐ ãÝÕáÕâÕ \"root\" ÛÞ×ØÝÚã. \"root\" øÕ ÐÔÜØÝØáâàÐâÞà\n"
-"áØáâÕÜÐ Ø øÕÔØÝØ øÕ ÞÒÛÐèâÕÝ ÔÐ ÒàèØ Ø×ÜÕÝÕ, ÔÞÔÐøÕ ÚÞàØáÝØÚÕ,\n"
-"ÜÕúÐ ÞáÝÞÒÝã ÚÞÝäØÓãàÐæØøã áØáâÕÜÐ, ØâÔ. ÃÚàÐâÚÞ, \"root\" ÜÞÖÕ\n"
-"ÔÐ ãàÐÔØ áÒÕ! ·ÑÞÓ âÞÓÐ ÜÞàÐâÕ ÔÐ Ø×ÐÑÕàÕâÕ ÛÞ×ØÝÚã ÚÞøÐ âÕèÚÞ ÜÞÖÕ ÔÐ áÕ\n"
-"ßÞÓÞÔØ - DrakX ûÕ ÒÐÜ àÕûØ ãÚÞÛØÚÞ øÕ ÞÝÐ áãÒØèÕ øÕÔÝÞáâÐÒÝÐ. ºÐÞ èâÞ ÜÞÖÕâÕ "
-"ÔÐ ÒØÔØâÕ, ÜÞÖÕâÕ ÔÐ\n"
-"Ø×ÐÑÕàÕâÕ Ø ÔÐ ÝÕ ãÝÕáÕâÕ ÛÞ×ØÝÚã, ÐÛØ ÒÐÜ Þ×ÑØùÝÞ ßàÕßÞàãçãøÕÜÞ ÔÐ âÞ\n"
-"ÝÕàÐÔØâÕ Ø× øÕÔÝÞÓ àÐ×ÛÞÓÐ: ÝÕÜÞøâÕ ÔÐ ÜØáÛØâÕ ÔÐ âÞ èâÞ áâÕ áâÐàâÞÒÐÛØ GNU/"
-"Linux ÔÐ\n"
-"ÒÐèØ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜØ áØÓãàÝØ ÞÔ ÓàÕèÐÚÐ. ºÐÚÞ \"root\" ÜÞÖÕ ÔÐ\n"
-"ßàÕáÚÞçØ áÒÐ ÞÓàÐÝØçÕúÐ Ø ÝÕÝÐÜÕàÝÞ Ø×ÑàØèÕ áÒÕ ßÞÔÐâÚÕ ÝÐ ßÐàâØæØøØ\n"
-"ÝÕÞßàÕ×ÝØÜ ßàØáâãßÞÜ, ÒÐÖÝÞ øÕ ÔÐ øÕ âÕèÚÞ\n"
-"ßÞáâÐâØ \"root\".\n"
-"\n"
-"»Þ×ØÝÚÐ âàÕÑÐ ÔÐ ÑãÔÕ ÜÕèÐÒØÝÐ ÑàÞøÕÒÐ Ø áÛÞÒÐ Ø âàÕÑÐ ÔÐ áÐÔàÖØ ÝÐøÜÐúÕ 8\n"
-"ÚÐàÐÚâÕàÐ. ½ØÚÐÔÐ ÝÕ ×ÐßØáãøâÕ ÝÐ ßÐßØà \"root\" ÛÞ×ØÝÚã - âÐÚÞ ÛÐÚÞ\n"
-"ÜÞÖÕâÕ ãÓàÞ×ØâØ áØáâÕÜ.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-
-#: ../../help.pm_.c:663
-#, fuzzy
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO Ø GRUB áã áâÐàâÕàØ (boot loaders) ×Ð GNU/Linux. ¾ÒÐø ÚÞàÐÚ øÕ , "
-"ÝÐàÐÒÝÞ,\n"
-"ßÞâßãÝÞ ÐãâÞÜÐâØ×ÞÒÐÝ. à áâÒÐàØ, DrakX ÐÝÐÛØ×ØàÐ boot áÕÚâÞà åÐàÔ ÔØáÚÐ\n"
-"Ø àÕÐÓãøÕ ÝÐ ÞáÝÞÒã ÞÝÞÓ èâÞ øÕ ßàÞÝÐèÐÞ:\n"
-"\n"
-" * ãÚÞÛØÚÞ øÕ ßàÞÝÐòÕÝ Windows boot áÕÚâÞà, ÞÝ ûÕ ÓÐ ×ÐÜÕÝØâØ áÐ GRUB/LILO "
-"boot\n"
-"áÕÚâÞàÞÜ. ÁàÕûÞÜ, ÜÞûØ ûÕâÕ ÔÐ áâÐàâãøÕâÕ ØÛØ GNU/Linux ØÛØ ÝÕÚØ ÔàãÓØ OS;\n"
-"\n"
-" * ãÚÞÛØÚÞ øÕ ßàÞÝÐòÕÝ GRUB ØÛØ LILO boot áÕÚâÞà, ÞÝ ûÕ ÓÐ ×ÐÜÕÝØâØ áÐ "
-"ÝÞÒØÜ;\n"
-"\n"
-"ÃÚÞÛØÚÞ øÕ ã ÔØÛÕÜØ, DrakX ûÕ ßàØÚÐ×ÐÔØ ÔØøÐÛÞÓ áÐ àÐ×ÛØçØâØÜ ÞßæØøÐÜÐ.\n"
-"\n"
-" * \"¿ÞÝãòÕÝØ áâÐàâÕàØ\": ØÐÜâÕ âàØ ÞßæØøÕ:\n"
-"\n"
-"    * \"LILO áÐ ÓàÐäØçÚØÜ ÜÕÝØøÕÜ\": ãÚÞÛØÚÞ ÒØèÕ ÒÞÛØâÕ LILO áÐ ÓàÐäØçÚØÜ\n"
-"ØÝâÕàäÕøáÞÜ.\n"
-"\n"
-"    * \"GRUB\": ãÚÞÛØÚÞ ÒØèÕ ÒÞÛØâÕ GRUB (âÕÚáâãÐÛÝØ ÜÞÔ).\n"
-"\n"
-"    * \"LILO áÐ âÕÚáâãÐÛÝØÜ ÜÕÝØøÕÜ\": ãÚÞÛØÚÞ ÒØèÕ ÒÞÛØâÕ LILO áÐ "
-"âÕÚáâãÐÛÝØÜ ØÝâÕàäÕøáÞÜ.\n"
-"\n"
-" * \"Boot ãàÕòÐø\": ã ÒÕûØÝØ áÛãçÐøÕÒÐ, ÝÕûÕâÕ ÜÕúÐâØ default\n"
-"(\"/dev/hda\"), ÐÛØ ãÚÞÛØÚÞ ÖÕÛØâÕ, ÜÞÖÕâÕ áâÐàâÕà ÔÐ ØÝáâÐÛØàÐâÕ ÝÐ\n"
-"ÔàãÓØ åÐàÔ ÔØáÚ (\"/dev/hdb\"), ØÛØ çÐÚ ÝÐ ÔØáÚÕâã (\"/dev/fd0\").\n"
-"\n"
-" * \"²àÕÜÕ ÔÞ ßÞèÕâÚÐ áâÐàâÐúÐ default áØáâÕÜÐ\": ÚÐÔÐ áâÐàâãøÕâÕ àÐçãÝÐà,\n"
-"ÞÒÐ ßÐã×Ð ÒÐÜ ÞÜÞÓãûÐÒÐ ÔÐ Ø×ÐÑÕàÕâÕ - ã áâÐàâÕàÞÒÞÜ ÜÕÝØøã,\n"
-"ÔàãÓØ áØáâÕÜ (àÕæØÜÞ ªØúÔÞÒá).\n"
-"\n"
-"!! ±ãÔØâÕ ßÐÖùØÒØ, øÕà ÐÚÞ Ø×ÐÑÕàÕâÕ ÔÐ ÝÕ ØÝáâÐÛØàÐâÕ áâÐàâÕàr (ÚÛØÚÞÜ ÝÐ\n"
-"\"¿ÞÝØèâØ\"), ÜÞàÐâÕ ÞáØÓãàÐâØ ÔàãÓØ ÝÐçØÝ ÔÐ áâÐàâãøÕâÕ Mandrake\n"
-"Linux áØáâÕÜ! ±ãÔØâÕ áØÓãàÝØ ÔÐ ×ÝÐâÕ èâ ÐàÐÔØâÕ ßàÕ ÝÕÓÞ Ø×ÜÕÝØâÕ\n"
-"Ø øÕÔÝã ÞßæØøã. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) Ø Grub áã áâÐàâÕàØ: ÞÝØ ÞÜÞÓãûÐÒÐjã ÔÐ áâÐàâÐâÕ \n"
-"ØÛØ Linux ØÛØ ÑØÛÞ ÚÞjØ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜ ßàØáãâÐÝ ÝÐ ÒaèÕÜ àÐçãÝÐàã.\n"
-"½ÐàÐÒÝÞ, ÞÒØ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜØ áã ØáßàÐÒÝÞ ÔÕâÕÚâÞÒÐÝØ Ø "
-"ØÝáâÐÛØàÐÝØ.\n"
-"ÃÚÞÛØÚÞ âÞ ÝØjÕ âÐÚÞ,ÜÞÖÕâÕ âÞ áÐÜØ ãàÕÔØâØ ÞÒÔe.¿Ð×ØâÕ ÚÐÔÐ ãÝÞáØâÕ\n"
-"ßÐàÐÜeâàe\n"
-"\n"
-"ÂÐÚÞòe,ÜÞÖeâe ÖÕÛÕâØ ÔÐ ÞáâÐÛØÜ ÞßÕàÐâ.áØáâÕÜØÜÐ ÞÝeÜÞÓãûØâe ÔÐ ßàØáâãßÕ "
-"ÔàãÓØ\n"
-"à âÞÜ áÛãçÐjã, âàÕÑÐ ÔÐ Ø×ÑàØèÕâÕ ÞÔÓÞÒÐàÐjãûe ÛØÝØje ×Ð âÕ áØáâÕÜe. °ÛØ\n"
-"ÞÝÔa ÜÞàÐâÕ ØÜÐâØ boot ÔØáÚÕâã ÔÐ ÑØ Øå ÒØ ÜÞÓÛØ ßÞÚàÕÝãâØ!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"¼ÞàÐâÕ Þ×ÝÐçØâØ ÓÔÕ ÖÕÛØâÕ ÔÐ ßÞáâÐÒØâÕ ßÞÔÐâÚÕ ßÞâàÕÑÝÕ ×Ð ßÞÔØ×ÐúÕ GNU/"
-"Linux-Ð.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÝÕ×ÝÐâÕ âÐçÝÞ èâÐ àÐÔØâÕ,Ø×ÐÑÕàØâÕ \"¿àÒØ áÕÚâÞà\n"
-"ÔØáÚÐ (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control "
-"Centernand clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX áÐÔÐ âàÕÑÐ ÔÐ ÔÕâÕÚâãøÕ IDE ãàÕòÐøÕ ßàØáãâÝÕ ã ÒÕèÕÜ àÐçãÝÐàã.DrakX ûÕ "
-"ßÞâàaÖØâØ PCI SCSI ÐÔÐßâÕà(e).\n"
-"ÃÚÞÛØÚÞ DrakX ßàÞÝaòÕ SCSI ÐÔÐßâÕà(Õ) Ø ÑãÔÕ ×ÝÐÞ ÚÞjØ ãßàÐÒùaçÚØ ßàÞÓàÐÜ \n"
-"(ÔàÐjÒÕà) ÚÞàØáâØÞÝ ûÕ ÓÐ(Øå) ÐãâÞÜÐâáÚØ ØÝáâÐÛØàÐâØ.\n"
-"\n"
-"¿ÞèâÞ áÕ ÜÞÖÕ ÔÕáØâØ ÔÐ ßàØ ÔÕâÕÚæØøØ ÝÕÚÐ ÚÞÜßÞÝÕÝâÐ ÝÕ ÑãÔÕ ÔÕâÕÚâÞÒÐÝÐ "
-"DrakX ûÕ ÒÐá ãßØâÐâØ ÔÐ ÛØ ØÜÐâÕ PCI SCSI ÐÔÐßâÕà. ºÛØÚÝØâÕ \"´Ð\" \n"
-"ãÚÞÛØÚÞ ×ÝÐâÕ ÔÐ ØÜÐâÕ SCSI ÐÔÐßâÕà ÝÐ áÒÞøÞø ÜÐèØÝØ. ½Ð ßàØÚÐ×ÐÝÞø ÛØáâØ "
-"ÜÞûØ ûÕâÕ ÔÐ Ø×ÐÑÕàÕâÕ ÞÔÓÞÒÞÐàÐøãûØ.\n"
-"ºÛØÚÝØâÕ \"½Õ\" ãÚÞÛØÚÞ ÝÕÜÐâÕ SCSI ÐÔÐßâÕàÐ ã  ÜaèØÝØ. ÃÚÞÛØÚÞ ÝØáâÕ "
-"áØÓãàÝØ\n"
-"ßàÞÒÕàØâÕ ÝÐ ÛØáâØ ÔÕâÕÚâÞÒÐÝÞÓ åÐàÔÒÕàÐ áÕÛÕÚâÞÒÐúÕÜ \"¿ÞÓÛÕÔÐø ØÝäÞ Þ "
-"åÐàÔÒÕàã\"Ø ÚÛØÚÞÜ ÝÐ \"à àÕÔã\". ¿àÕÓÛÕÔÐøâÕ\n"
-"ÛØáâã Ð ÞÝÔÐ ÚØÚÝØâÕ ÝÐ \"à àÕÔã\" ÔÐ ÑØ áÕ ÒàÐâØÛØ ÝÐ ßØâÐúÕ Þ SCSI "
-"ãàÕòÐøØÜÐ.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÜÞàÐâÕ àãçÝÞ ÔÐ áßÕæØäØæØàÐâÕ Òaè ÐÔÐßâÕà, DrakX ûe\n"
-"ÒÐá ãßØâÐâØ ÔÐ ÞÔàÕÔØâÕ ÞßæØjÕ ×Ð úÕÓa.ÂàÕÑÐ ÛØ ÑØ ÔÐ ÔÞ×ÒÞÛØâe DrakX-ã Ôa\n"
-"ØáßØâÐ ÐÔÐßâÕà àÐÔØ âØå ÞßæØja. ¾ÒÞ ÞÑØçÝÞ Ø ãáße.\n"
-"\n"
-"ÃÚÞÛØÚÞ DrakX ÝØøÕ ã áâÐúã ÔÐ ØáßØâÐ ÞßæØøÕ ÚÞøÕ áã ßÞâàÕÑÝÕ, ÜÞàaûÕâÕ ÔÐ "
-"áÐÜØ ÞÔàÕÔØâe ÞßæØjÕ ×Ð ÔàÐjÒÕà.\n"
-"¿ÞÓÛÕÔÐjâÕ Ø ¸ÝáâÐÛÐæØÞÝØ ÒÞÔØç (3 ßÞÓÛÐÒùÕ, áÕÚæØøÐ \"¿àØÚãßùÐúÕ "
-"ØÝäÞàÜÐæØøÐ Þ ÒÐèÕÜ åÐàÔÒÕàã\")\n"
-"ÔÐ ÑØ áÐ×ÝÐÛØ ÚÐÚÞ ÔÐ ßàØÑÐÒØâÕ ØÝäÞàÜÐæØøÕ Þ ßÐàÐÜÕâàØÜÐ ßÞâàÕÑÝØÜ ×Ð "
-"åÐàÔÒÕà,áÐ áÒÞjÕ Windows ØÝáâÐÛÐæØjÕ (ãÚÞÛØÚÞ jÕ ØÜÐâÕ ÝÐ áØáâÕÜã),\n"
-"ÔÞÚãÜÕÝÐâæØjã Þ åÐàÔÒÕàã, ØÛØ áÐ ßàÞØ×ÒÞòaçÕÒÞÓ \n"
-"ÒÕÑ áÐjâa (ãÚÞÛØÚÞ ØÜÐâÕ ßàØáâãß ØÝâÕàÝÕâã)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"¼ÞÖÕâÕ ÔÞÔÐâØ Ø ÔÞÔÐâÝe ãÝÞáÕ ×Ð yabbot, ØÛØ ×Ð ÔàãÓÕ ÞßÕàÐâØÒÝÕ sáØáâÕÜe,\n"
-"ÐÛâÕàÝÐâØÒÝÕ ÚÕàÝÕÛe, ØÛØ ×Ð emergency boot image.\n"
-"\n"
-"·Ð ÔàãÓe OS-ÞÒe - ãÝÞá áÐÔàÖØ áÐÜÞ Þ×ÝÐÚã Ø root ßÐàâØæØjã.\n"
-"\n"
-"·Ð Linux, ßÞáâÞjØ ÝÕÚÞÛØÚÞ ÜÞÓãûÝÞáâØ: \n"
-"\n"
-" * ¾×ÝÐÚa: ¾ÒÞ jÕ jÕÔÝÞáâÐÒÝÞ ØÜÕ ÚÞjÕ ûeâe ãÚãæÐâØ ßàØ yaboot ßàÞÜßâã ÔÐ ÑØ "
-"Ø×aÑàÐÛØ ÞÒã \n"
-"áâÐàâÝã ÞßæØjã.\n"
-"\n"
-" * Image: ¾ÒÞ jÕ ØÜÕ ÚÕàÝÕÛÐ ÚÞjØ áÕ áâÐàâãje.  ¾ÑØçÝÞ vmlinux ØÛØ \n"
-"ÒÐàØjÐæØjÐ vmlinux áÐ ÕÚáâÕÝ×ØjÞÜ.\n"
-"\n"
-" * Root: \"root\" ãàÕòÐø ØÛØ \"/\" ×Ð Òaèã Linux ØÝáâÐÛÐæØjã.\n"
-"\n"
-"  \n"
-" * ´ÞÔÐâÐÚ: ½Ð Apple åÐàÔÒÕàã, ÚÕàÝÕÛÞÒÐ ÞßæØja áÕ ÚÞàØáâØ ×a ßàØÛØçÝÞ çÕáâÞ "
-"Ôa\n"
-"ÐáØáâØàÐ ØÝØæØjÐÛØ×ÐæØjã ÒØÔÕÞ åÐàÔÒÕàa, ØÛØ ÔÐ ÞÜÞÓãûØ ÕÜãÛÐæØjã âÐáâÕàÐ ×Ð "
-"ÜØè ÝÐ âÐáâÐâãàØ ×ÑÞÓ \n"
-"çÕáâÞÓ ÝÕÔÞáâÐâÚÐ ÔàãÓÞÓ Ø âàeûÕÓ âÐáâÕàÐ ÝÐ Apple ÜØèÕÒØÜa.  ÁÛÕÔØ ßÐà \n"
-"ßàØÜÕàa:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: ¾ÒÐ ÞßæØjÐ áÕ ÜÞÖÕ ÚÞàØáâØâØ ØÛØ ×Ð ßÞÔØ×ÐúÕ ØÝØæØjÐÛÝØå ÜÞÔãÛa, "
-"ßàe ÝÕÓÞ jÕ boot \n"
-"ãàÕòÐø ÔÞáâãßÐÝ, ØÛØ ×Ð ßÞÔØ×ÐúÕ ramdisk image ×Ð áâÐàâaúÕ ã åØâÝØÜ "
-"áØâãÐæØjÐÜa.\n"
-"\n"
-" * Initrd-ÒÕÛØçØÝa: ÒÕÛØçØÝa default ramdisk jÕ ÓÕÝÕàÐÛÝÞ 4096 ÑÐjâa.  "
-"ÃÚÞÛØÚÞ ÒÐÜ âàÕÑa\n"
-"ÐÛÞæØàaúÕ ÒÕÛØÚÞÓ ramdisk-a, ÞÒÐ ÞßæØjÐ ÜÞÖÕ ÑØâØ ÚÞàØáÝa.\n"
-"\n"
-"  - Read-write: ½ÞàÜÐÛÝÞ áe 'root' ßÐàâØæØjÐ ØÝØæØjÐÛÝÞ ßÞáâÐÒùÐ ÚÐÞ read-"
-"only, ÔÐ ÑØ ÞÜÞÓãûØÛa\n"
-"ßàÞÒÕàã ÔÐâÞâeçÝÞÓ áØáâÕÜÐ ßàÕ ÝÕÓÞ áØáâÕÜ ßÞáâÐÝÕ \"ÐÚâØÒÐÝ\".  ¾ÒÔÕ ÜÞÖÕâÕ "
-"ßÞÝØèâØâØ ÞÒã ÞßæØjã.\n"
-"\n"
-" * NoVideo: ÃÚÞÛØÚÞ áÕ Apple ÒØÔÕÞ åÐàÔÒÕà ßÞÚaÖÕ ÒÕÞÜa ßàÞÑÛÕÜÐâØçÝØÜ, "
-"ÜÞÖÕâe\n"
-"Ø×ÐÑàÐâØ ÞÒã ÞßæØjã ÔÐ ÑØ áâÐàâÐÛØ áØáâÕÜ ã 'novideo' ÜÞÔã, áÐ ÞáÝÞÒÝÞÜ "
-"framebuffer ßÞÔàèÚÞÜ.\n"
-"\n"
-" * Default: ºÐÚÞ jÕ ÞÒÞ default Linux áÕÛÕÚæØja, ÔÞÒÞùÝÞ jÕ ÔÐ áÐÜÞ\n"
-"ßàØâØáÝÕâe ENTER ßàØ yaboot ßàÞÜßâã.  ¾ÒÐj ãÝÞá ûÕ âÐÚÞòÕ ÑØâØ ÔÞÔÐâÝÞ "
-"Þ×ÝaçÕÝ áa \"*\", ãÚÞÛØÚÞ\n"
-"ßàØâØáÝÕâe TAB ÔÐ ÑØ ÒØÔÕÛØ áâÐàâÝã áÕÛÕÚæØjã."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot jÕ áâÐàâÕà NewWorld MacIntosh åÐàÔÒÕà. ¾Ý ÜÞÖÕ Ôa ßÞÚàÕÝÕ\n"
-"GNU/Linux, MacOS, ØÛØ MacOSX, ãÚÞÛØÚÞ áã ßàØáãâÝØ ÝÐ ÒaèÞj ÜaèØÝØ.\n"
-"½ÞàÜÐÛÝÞ, ÞÒØ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜØ áÕ áÜÐâàÐjã ÚÞàÕÚâÝÞ ÔÕâÕÚâÞÒÐÝØ Ø \n"
-"ØÝáâÐÛØàÐÝØ. ÃÚÞÛØÚÞ âÞ ÝØjÕ áÛãçÐj, ÜÞÖÕâÕ àãçÝÞ ÔÞÔÐâØ ãÝÞá ÝÐ ÞÒÞÜ\n"
-"ÕÚàÐÝã. ±ãÔØâÕ ßaÖùØÒØ ßàØ Ø×ÑÞàã ßÐàÐÜÕâÐàa.\n"
-"\n"
-"¾áÝÞÒÝÕ ÞßæØjÕ Yaboot-a áã:\n"
-"\n"
-"  - ¸ÝØæØjÐÛÝÐ ßÞàãÚa: JÕÔÝÞáâÐÒÝÐ âÕÚáâãÐÛÝÐ ßÞàãÚa ÚÞjÐ áÕ ßàØÚÐ×ãje ßàÕ "
-"áâÐâàâÝÞÓ\n"
-"ßàÞÜßâa.\n"
-"\n"
-" * Boot ãàÕòÐø: ÃÚÐ×ãjÕ ÓÔÕ ÖÕÛØâÕ ÔÐ áÜÕáâØâÕ ØÝäÞàÜÐæØjã ßÞâàÕÑÝã ×Ð \n"
-"áâÐàâaúe GNU/Linux-a. ³ÕÝÕàÐÛÝÞ ÓÛÕÔÐÝÞ, ÜÞàaûÕâÕ ÔÐ ßÞÔÕáØâe bootstrap "
-"ßÐàâØæØjã ßàe \n"
-"ÝÕÓÞ ßÞÔÕáØâÕ ÞÒã ØÝäÞàÜÐæØjã.\n"
-"\n"
-" * ¾ÜÞÓãûØ Firmware ßÐã×ã: ·Ð àÐ×ÛØÚã ÞÔ LILO-a, ßÞáâÞjÕ ÔÒÕ ÒàáâÕ ßaã×e \n"
-"yaboot-a.  ¿àÒÐ ßÐã×Ð áÕ ÜÕàØ ã áÕÚãÝÔÐÜÐ Ø ã âÞÜ ÒàÕÜÕÝã ÜÞÖÕâÕ \n"
-"ÑØàÐâØ Ø×Üeòã CD-a, OF áâÐàâa, MacOS, ØÛØ Linux-a.\n"
-"\n"
-" * ¿Ðã×Ð ßàØ áâÐàâaúã ÚÕàÝÕÛa: ¾ÒÐ ßÐã×Ð jÕ áÛØçÝa ßÐã×Ø ÚÞÔ LILO áâÐàâÕàa.  "
-"½ÐÚÞÝ \n"
-"Ø×ÑÞàÐ Linux-a, ØÜaûÕâÕ ßÐã×ã ÞÔ 0.1 áÕÚãÝÔe ßàÕ ÝÕÓÞ èâÞ áÕ áÕÛÕÚâãje\n"
-"default ÞßØá ÚÕàÝÕÛa.\n"
-"\n"
-" * ¾ÜÞÓãûØ áâÐàâaúÕ CD-a ?: ÃÚÞÛØÚÞ Þ×ÝaçØâÕ ÞÒã ÞßæØjã ÜÞûØ ûÕâÕ ÔÐ "
-"Ø×ÐÑÕàÕâe \"C\" ×a CD ßàØ\n"
-"ßàÒÞÜ áâÐàâÝÞÜ ßàÞÜßâã.\n"
-"\n"
-" * ¾ÜÞÓãûØ OF áâÐàâaúÕ?: ÃÚÞÛØÚÞ Þ×ÝaçØâÕ ÞÒã ÞßæØjã ÜÞûØ ûÕâÕ ÔÐ Ø×ÐÑÕàÕâe "
-"\"N\" ×a ¾pen\n"
-"Firmware ßàØ ßàÒÞÜ áâÐàâÝÞÜ ßàÞÜßâã.\n"
-"\n"
-" * Default OS: ¼ÞÖÕâÕ ÔÐ Ø×ÐÑÕàÕâÕ ÚÞjØ ÞßÕàÐâØÒÝØ áØáâÕÜ ûÕ ÑØâØ ßÞÚàÕâÐÝ "
-"ÚÐÞ default ÚÐÔÐ Open Firmware \n"
-"ßÐã×Ð ×ÐÒàèØ."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"¾ÒÔÕ áã ßàØÚÐ×ÐÝØ àÐ×ÛØçØâØ ßÐàÐÜÕâàØ ÒÕ×ÐÝØ ×Ð ÒÐèã ÜÐèØÝã. à ×ÐÒØáÝÞáâØ\n"
-"ÞÔ ÒÐèÕÓ ØÝáâÐÛØàÐÝÞÓ åÐàÔÒÕàÐ, ÜÞÖÕâÕy - ØÛØ ÝÕ ÜÞàÐâÕ, ßÞÓÛÕÔÐøâÕ áÛÕÔÕûÕ "
-"ãÝÞáÕ:\n"
-"\n"
-" * \"¼Øè\": ßàÞÒÕàØâÕ âàÕÝãâÝÕ ßÞáâÐÒÚÕ ×Ð ÜØèÐ Ø ÚÛØÚÝØâÕ ÝÐ âÐáâÕà\n"
-"ÔÐ ÑØå ßàÞÜÕÝØÛØ ãÚÞÛØÚÞ øÕ ÝÕÞßåÞÔÝÞ.\n"
-"\n"
-" * \"ÂÐáâÐâãàÐ\": ßàÞÒÕàØâÕ âàÕÝãâÝØ àÐáÞàÕÔ âÐáâÐâãàÕ tion Ø ÚÛØÚÝØâÕ ÝÐ\n"
-"âÐáâÕà ÔÐ ÑØ ÝÐßàÐÒØÛØ Ø×ÜÕÝÕ ãÚÞÛØÚÞ áã ßÞâàÕÑÝÕ.\n"
-"\n"
-" * \"²àÕÜÕÝáÚÐ ×ÞÝÐ\": DrakX, ßÞ default-ã, ßÞÓÐòÐ ÒÐèã ÒàÕÜÕÝáÚã ×ÞÝã ã "
-"×ÐÒØáÝÞáâØ ÚÞøØ áÕ øÕ×ØÚ\n"
-"ÞÔÐÑàÐÛØ. °ÛØ ÞßÕâ, ÜÞÖÔÐ áâÕ Ø×ÐÑàÐÛØ âÐáâÐâãàã ÚÞøÐ áÕ àÐ×ÛØÚãøÕ\n"
-"ÞÔ âÐáâÐâãàÕ ×ÕÜùÕ ÚÞøã áâÕ ÝÐÒÕÛØ.\n"
-"¼ÞàÐûÕâÕ ÔÐ ÚÛØÚÝÕâÕ ÝÐ âÐáâÕà \"²àÕÜÕÝáÚÐ ×ÞÝÐ\" ÔÐ ÑØ\n"
-"ßÞÔÕáØÛØ çÐáÞÒÝØÚ ã áÚÛÐÔã áÐ ÒàÕÜÕÝáÚÞÜ ×ÞÝÞÜ ã ÚÞøÞø áÕ ÝÐÛÐ×ØâÕ.\n"
-"\n"
-" * \"ÈâÐÜßÐç\": ÚØÛÚÞÜ ÝÐ âÐáâÕà \"ÈâÐÜßÐç\" ßÞÚàÕÝãûÕâÕ çÐàÞÑúÐÚÐ ×Ð\n"
-"ÚÞÝäØÓãàØáÐúÕ èâÐÜßÐçÐ.\n"
-"\n"
-" * \"·ÒãçÝÐ ÚÐàâØæÐ\": ãÚÞÛØÚÞ øÕ ×ÒãçÝÐ ÚÐàâØæÐ ÔÕâÕÚâÞÒÐÝÐ, ÞÝÔÐ øÕ\n"
-"ÞÒÔÕ ßàØÚÐ×ÐÝÐ. ½Øáã ÜÞÓãûÕ ßàÞÜÕÝÕ ã âÞÚã ØÝáâÐÛÐæØøÕ.\n"
-"\n"
-" * \"TV ÚÐàâØæÐ\": ãÚÞÛØÚÞ øÕ TV ÚÐàâØæÐ ÔÕâÕÚâÞÒÐÝÐ, ÞÝÔÐ øÕ\n"
-"ßàØÚÐ×ÐÝÐ ÞÒÔÕ. ½Øáã ÜÞÓãûÕ ßàÞÜÕÝÕ ã âÞÚã ØÝáâÐÛÐæØøÕ.\n"
-"\n"
-" * \"ISDN ÚÐàâØæÐ\": ãÚÞÛØÚÞ øÕ ISDN ÚÐàâØæÐ ÔÕâÕÚâÞÒÐÝÐ, ÞÝÔÐ øÕ\n"
-"ßàØÚÐ×ÐÝÐ ÞÒÔÕ. ¼ÞÖÕâÕ ÚÛØÚÝãâØ ÝÐ âÕáâÕà ÔÐ ÑØ ßàÞÜÕÝØÛØ ßÐàÐÜÕâàÕ\n"
-"ÚÞøØ áã ÒÕ×ÐÝØ ×Ð úã."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"¸×ÐÑÕàØâÕ åÐàÔ ÔØáÚ ÚÞjØ ÖÕÛØâÕ ÔÐ Ø×ÑàØèÕâe ÔÐ ÑØ ØÝáâÐÛØàÐÛØ ÝÞÒã Mandrake "
-"Linux \n"
-"ßÐàâØæØjã. ±ãÔØâÕ ßaÖùØÒØ, áÒØ ßÞÔÐæØ ÝÐ úÕÜã ûÕ ÑØâØ Ø×ÓãÑùÕÝØ\n"
-"Ø ÝeûÕ áÕ ÜÞûØ ßÞÒàÐâØâØ!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ºÛØÚÝØâÕ ÝÐ \"à àÕÔã\" ãÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ Ø×ÑàØèÕâe áÒÕ ßÞÔÐâÚe Ø \n"
-"ßÐàâØæØjÕ ÝÐ ÞÒÞÜ åÐàÔ ÔØáÚã.±ãÔØâÕ ßaÖùØÒØ, ßÞáÛÕ ÚÛØÚÐ ÝÐ \"à àÕÔã\", ÒØ\n"
-"ÝeûÕâÕ ÜÞûØ ÔÐ ßÞÒàÐâØâÕ ÑØÛÞ ÚÞjØ ßÞÔÐâÐÚ ØÛØ ßÐàâØæØjã ÝÐ åÐàÔ ÔØáÚã,\n"
-"ßÐ Ø ÑØÛÞ ÚÞje Windows ßÞÔÐâÚe.\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ \"¿ÞÝØèâØ\" ÔÐ ÑØ ßÞÝØèâØ ÞÒã ÞßÕàÐæØjã ÑÕ× ÓãÑùeúÐ ßÞÔÐâÐÚÐ Ø\n"
-"ßÐàâØæØjÐ ÚÞjÕ áã ßàØáãâÝÕ ÝÐ ÞÒÞÜ åÐàÔ ÔØáÚã."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "¼ÞàÐâÕ Ø %s ÔÐ äÞàÜÐâØàÐâÕ"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"²Ø áâÕ Ø×ÐÑàÐÛØ áÛÕÔÕòÕ áÕàÒÕàÕ: %s\n"
-"\n"
-"\n"
-"¾ÒØ áÕàÒÕàØ áÕ ÐÚâØÒØàÐøã ßÞ ÞáÝÞÒÝÞø ßÞáâÐÒæØ. ¾ÝØ ÝÕÜÐøã ßÞ×ÝÐâØå "
-"áØÓãàÝÞáÝØå\n"
-"ÝÕÔÞáâÐâÐÚÐ, ÐÛØ áÕ ØßÐÚ ÜÞÓã ßÞøÐÒØâØ ÝÕÚØ ÝÞÒØ. ÃÚÞÛØÚÞ áÕ âÞ ÔÕáØ, ÜÞàÐâÕ "
-"Øå ÐÖãàØàÐâØ\n"
-"èâÞ øÕ ßàÕ ÜÞÓãòÕ.\n"
-"\n"
-"\n"
-"´Ð ÛØ ×ÐØáâÐ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ ÞÒÕ áÕàÒØáÕ?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "½ØøÕ ÜÞÓãû ßàÕÝÞá ÑÕ× NIS ÔÞÜÕÝÐ"
-
-#: ../../install_any.pm_.c:794
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ÃÑÐæØâÕ FAT äÞàÜÐâØàÐÝã ßàÐ×Ýã ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr "¾ÒÐ ÔØáÚÕâÐ ÝØje äÞàÜÐâØàÐÝÐ áÐ FAT áØáâÕÜÞÜ"
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"´Ð ÑØ ÚÞàØáâØÛØ ÞÒÐj Ø×ÑÞà ×Ð çãÒaúÕ áÕÛÕÚæØjÕ ßÐÚÕâa, Ø×ÐÑÕàØâÕ ØÝáâÐÛÐæØjã "
-"áa ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "³àÕèÚÐ ÚÞÔ ÞâÒÐàÐúÐ ÔÐâÞâÕÚa %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"½ÕÚÕ åÐàÔÒÕàáÚÕ ÚÞÜßÞÝÕÝâÕ ã ÒaèÕÜ àaçãÝÐàã ×ÐåâÕÒÐjã ÞÔÓÞÒÐàÐjãûe ÔàÐjÒÕàe "
-"ÔÐ ÑØ ÝÞàÜÐÛÝÞ äãÝÚæØÞÝØáÐÛe.\n"
-"¸ÝäÞàÜÐæØjÕ Þ úØÜÐ ÜÞÖÕâÕ ßàÞÝaûØ ÝÐ: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"¼ÞàÐâÕ ØÜÐâØ  root ßÐàâØæØjã.\n"
-"·Ð ÞÒÞ, ÚàÕØàÐøâÕ ßÐàâØæØøã (ØÛØ ÚÛØÚÝØâÕ ÝÐ ßÞáâÞøÕûã).\n"
-"·ÐâØÜ Ø×ÐÑÕàØâÕ \"ÂÐçÚÐ ÜÞÝâØàÐúÐ\" Ø ßÞÔÕáØâÕ ÝÐ `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "¼ÞàÐâÕ ØÜÐâØ swap ßÐàâØæØøã"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"ÅÜ, ÝÕÜÐ swap ßÐàâØæØøÕ\n"
-"\n"
-"ÁÒÕøÕÔÝÞ ÝÐáâÐÒØâØ ÔÐùÕ ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "¼ÞàÐâÕ ØÜÐâØ FAT ßÐàâØæØøã ÜÞÝâØàÐÝã ã /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "ºÞàØáâØ áÛÞÑÞÔÐÝ ßàÞáâÞà"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ ×Ð ÐÛÞæØàaúÕ ÝÞÒØå ßÐàâØæØja"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partitions"
-msgstr "ºÞàØáâØ ßÞáâÞjeûã ßÐàâØæØøã"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "½ÕÜÐ ÝØ jeÔÝÕ ßÐàØâØæØjÕ ×Ð àÐÔ"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "ºÞàØáâØ Windows ßÐàâØæØjã ×Ð loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ºÞøã ßÐàâØæØøã ÖÕÛØâÕ ÔÐ ÚÞàØáØâÕ ×Ð Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "¸×ÐÑÕàØâÕ ÒÕÛØçØÝã"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "²ÕÛØçØÝÐ Root ßÐàâØæØjÕ ã MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "²ÕÛØçØÝÐ Swap ßÐàâØæØjÕ ã MB:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "ºÞàØáØâØ áÛÞÑÞÔÐÝ ßàÞáâÞà ÝÐ Windows ßÐàâØæØjØ"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "ºÞøÞj ßÐàâØæØøØ  ÖÕÛØâÕ ÔÐ ßàÞÜÕÝØâÕ ÒÕÛØçØÝã?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing Windows partition"
-msgstr "¿àÞàÐçãÝÐÒÐÜ ÓàÐÝØæÕ Windows äÐøÛ-áØáâÕÜÐ"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"¿àÞÓàÐÜ ×Ð ßàÞÜÕÝã ÒÕÛØçØÝÕ FAT ßÐàØâæØja ÝÕ ÜÞÖÕ ÔÐ ãßàÐÒùÐ ÒaèÞÜ "
-"ßÐàâØæØjÞÜ, \n"
-"×ÑÞÓ áÛÕÔeûÕ ÓàeèÚe: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"²aèÐ Windows ßÐàâØæØjÐ jÕ ßàÕÒØèÕ äàÐÓÜÕÝâØàÐÝÐ, ßàÒÞ ßÞÚàÕÝØâÕ ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÿ¾·¾Àµªµ!\n"
-"\n"
-"DrakX âàÕÑÐ ÔÐ Ø×ÜÕÝØ ÒÕÛØçØÝã Windows ßÐàâØæØøÕ. ±ãÔØâÕ ßÐÖùØÒØ: ÞÒÐ\n"
-"ÞßÕàÐæØøÐ øÕ ÞßÐáÝÐ. ÃÚÞÛØÚÞ âÞ ÔÞ áÐÔÐ ÝØáâÕ àÐÔØÛØ, ßàÒÞ âàÕÑÐ ÔÐ Ø×aòÕâÕ\n"
-"Ø× ØÝáâÐÛÐæØjÕ,ßÞÚàÕÝÕâÕ ßÞÔ Windows-ÞÜ\n"
-"scandisk (ÕÒÕÝâãÐÛÝÞ Ø defrag), Ð ÞÝÔÐ ßÞÝÞÒÞ ßÞÚàÕÝØâÕ ØÝáâÐÛÐæØjã.\n"
-"°ÚÞ áâÕ áØÓãàÝØ, ßàØâØáÝØâÕ ¾º (à àÕÔã)."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for Windows on"
-msgstr "ºÞjã ÒÕÛØçØÝã ÖÕÛØâe ÔÐ ×ÐÔàÖØâÕ ×Ð ßàÞ×Þàe"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "ßÐàâØæØøÐ %s "
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT Ø×ÜÕÝÐ ÒÕÛØçØÝÕ ÝÕãáßÕÛÐ: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"½Õ ßÞáâÞje FAT ßÐàâØæØjÕ ÚÞjØÜa áÕ ÜÞÖÕ ßàÞÜÕÝØâØ ÒÕÛØçØÝa ØÛØ ÚÞjÕ áÕ ÜÞÓã "
-"ÚÞàØáØâØâØ ×a loopback (ØÛØ ÝÕÜÐ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàa)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "¸×ÑàØèØ æÕÛØ ÔØáÚ"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "ÃÚÛÞÝØ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"¸ÜÐâÕ ÒØèÕ ÞÔ jÕÔÝÞÓ åÐàÔ ÔØáÚÐ, ÝÐ ÚÞjØ ÞÔ úØå ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ "
-"»ØÝãÚá ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Á²µ ßÞáâÞjeûÕ ßÐàâØæØjÕ Ø ßÞÔÐæØ ÝÐ ÔØáÚã %s ûÕ ÑØâØ Ø×ÓãÑùÕÝØ"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Custom ÔØáÚ ßÐàâØæØÞÝØàaúe"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "ºÞàØáâØ fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ÁÐÔa ÜÞÖÕâÕ ßÐàâØæØÞÝØàÐâØ Òaè %s åÐàÔ ÔØáÚ ãàÕòÐø\n"
-"ºaÔa ×ÐÒàèØâÕ,ÝÕ ×ÐÑÞàÐÒØâÕ ÔÐ ßÞâÒàÔØâÕ ÚÞàØáâeûØ `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "½ÕÜÐâÕ ÔÞÒÞùÝÞ áÛÞÑÞÔÝÞÓ ßàÞáâÞàa ÝÐ Windows ßÐàâØæØjØ"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "½Õ ÜÞÓã ÔÐ ßàÞÝaòÕÜ áÛÞÑÞÔÐÝ ßàÞáâÞà ×Ð ØÝáâÐÛØàaúÕ"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX çÐàÞÑúÐÚ ×Ð ßÐàâØæØÞÝØàaúÕ jÕ ßàÞÝaèÐÞ áÛÕÔeûÐ àeèeúÐ:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "¿ÐàâØæØÞÝØàaúÕ ÝØjÕ ãáßÕÛÞ : %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "¿àØáâãßÐÜ  ÜàÕÖã"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "¾ÔáâãßÐÜ ÞÔ ÜàÕÖe"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"³àÕèÚÐ, ÐÛØ ÝÕ×ÝÐÜ ÚÐÚÞ ÔÐ øÕ àÐ×àÕèØÜ.\n"
-"½ÐáâÐÒØâÕ ÝÐ ÒÐè àØ×ØÚ!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "´ãßÛØàÐÝa âÐçÚÐ ÜÞÝâØàÐúÐ %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"½ÕÚØ ÒaÖÝØ ßÐÚÕâØ ÝØáã ÔÞÑàÞ ØÝáâÐÛØàÐÝØ.\n"
-"²aè cdrom ãàeòÐj ØÛØ cd áã ÝÕØáßàÐÒÝØ.\n"
-"¿àÞÒÕàØâe cdrom ÝÐ ØÝáâÐÛØàÐÝÞÜ ÚÞÜßjãâÕàã ÚÞàØáâeûe \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "´ÞÑàÞèÛØ ã  %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "½ÕßàØáâãßÐçÐÝ ÔØáÚÕâÝØ ãàÕòÐø"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "¿ÞÚàÕûÕÜ ÚÞàÐÚ `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"²aè áØáâÕÜ ØÜÐ ÜaúÐÚ áÝÐÓÕ. ÃáÛÕÔ âÞÓÐ ÜÞÖÕâÕ ØÜaâØ ßàÞÑÛÕÜÐ ßàØ "
-"ØÝáâÐÛÐæØjØ\n"
-"Mandrake Linux. ÃÚÞÛØÚÞ áÕ ÞÝØ ßÞjÐÒe, ÜÞÖÕâÕ ßàÞÑÐâØ âÕÚáâãÐÛÝã "
-"ØÝáâÐÛÐæØjã. ´Ð ÑØ âÞ ßÞáâØÓÛØ,\n"
-"ßàØâØáÝØâe `F1' ßàØ áâÐàâaúã áÐ CDROM-a, Ð ÞÝÔÐ ãÚãæÐjâe  `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "¸ÝáâÐÛÐæØÞÝe ÚÛÐáÕ"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "¼ÞÛØÜ ÒÐá ÔÐ Ø×ÐÑÕàÕâÕ jÕÔÝã ÞÔ áÛÕÔeûØå ØÝáâÐÛÐæØÞÝØå ÚÛÐáa:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "ÃÚãßÝÐ ÒÕÛØçØÝa ÓàãßÐ ÚÞjÕ áâe Ø×ÐÑàÐÛØ Ø×ÝÞáØ  %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ ÜaúÕ,\n"
-"Ø×ÐÑÕàØâÕ ßàÞæÕÝâãÐÛÝÞ ÑàÞj ßÐÚÕâÐ ÚÞjÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ.\n"
-"\n"
-"¿àØ ÜÐÛÞÜ ßàÞæÕÝâã ûÕ áÕ ØÝáâÐÛØàÐâØ áÐÜÞ ÒÐÖÝØ ßÐÚÕâØ;\n"
-"ÔÞÚ ûÕ ßàØ ßàÞæÕÝâã ÞÔ 100%% ÑØâØ ØÝáâÐÛØàÐÝØ áÒØ ßÐÚÕâØ."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"½Ð ÒaèÕÜ ÔØáÚã ØÜÐ ÜÕáâÐ áÐÜÞ ×a %d%% ÞÒØå ßÐÚÕâa.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ ÜaúÕ ÞÔ ÞÒÞÓa,\n"
-"Ø×ÐÑÕàØâÕ ßàÞæÕÝâãÐÛÝÞ ÑàÞj ßÐÚÕâÐ ÚÞjÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ.\n"
-"¿àØ ÜÐÛÞÜ ßàÞæÕÝâã ûÕ áÕ ØÝáâÐÛØàÐâØ áÐÜÞ ÒÐÖÝØ ßÐÚÕâØ;\n"
-"ÔÞÚ ûÕ ßàØ ßàÞæÕÝâã ÞÔ  %d%% ÑØâØ ØÝáâÐÛØàÐÝÞ ÜÐÚáØÜÐÛÝÞ ÜÞÓãû ÑàÞj ßÐÚÕâa"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "¼ÞûØ ûÕâÕ ÔÐ Øå ßàÕæØ×ÝØøÕ ÑØàÐâÕ ã áÛÕÔÕûeÜ ÚÞàÐÚã."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "¿àÞæÕÝÐâ ßÐÚÕâa ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr "¾ÔÐÑØà ÓàãßÐ ßÐÚÕâÐ"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr "¿ÞjÕÔØÝaçÝÞ ÑØàaúÕ ßÐÚÕâa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "ÃÚãßÝÐ ÒÕÛØçØÝÐ: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "»Þè ßÐÚÕâ"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "¸ÜÕ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "²Õà×ØøÐ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "²ÕÛØçØÝÐ: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "²aÖÝÞ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "½Õ ÜÞÖÕâÕ áÕÛÕÚâÞÒÐâØ ÞÒÐj ßÐÚÕâ jÕà ÝÕÜÐ ÒØèÕ áÛÞÑÞÔÝÞÓ ßàÞáâÞàa"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "ÁÛeÔeûØ ßÐÚÕâØ âàÕÑÐ ÔÐ ÑãÔã ØÝáâÐÛØàÐÝØ"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "ÁÛÕÔeûØ ßÐÚÕâØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "½Õ ÜÞÖÕâÕ áÕÛÕÚâÞÒÐâØ/ÔÕáÕÛÕÚâÞÒÐâØ ÞÒÐj ßÐÚÕâ"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "¾ÒÞ jÕ ÞÑÐÒÕ×ÝØ ßÐÚÕâ,Ø ÝÕ ÜÞÖe ÑØâØ ÔÕáÕÛÕÚâÞÒÐÝ"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "¼ÞÖÕâÕ ÔÕáÕÛÕÚâÞÒÐâØ ÞÒÐj ßÐÚÕâ jÕà jÕ Òeû ØÝáâÐÛØàÐÝ"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"¾ÒÐj ßÐÚÕâ ÜÞàÐ ÑØâØ aÖãàØàÐÝ\n"
-"´Ð ÛØ áØÓãàÝÞ ÖÕÛØâÕ ÔÐ ÓÐ ÔÕáÕÛÕÚâãjÕâe ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "½Õ ÜÞÖÕâÕ ÔÕáÕÛÕÚâÞÒÐâØ ÞÒÐj ßÐÚÕâ.¾Ý ÜÞàÐ ÑØâØ aÖãàØàÐÝ"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "°ãâÞÜÐâáÚØ ßàØÚÐÖØ Ø×ÐÑàÐÝÕ ßÐÚÕâe"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "¸ÝáâÐÛØàÐø"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "ÃçØâÐø/ÁÝØÜØ ÝÐ ÔØáÚÕâã"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "°ÖãàØàÐúÕ áÕÛÕÚæØøÕ ßÐÚÕâÐ"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "¼ØÝØÜÐÛÝÞ ØÝáâÐÛØàÐø"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr "¸×ÐÑÕàØ ßÐÚÕâÕ ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr "¸ÝáâÐÛØàÐÜ"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "¿àÞæÕúãøÕÜ"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "¿àÕÞáâÐÛÞ ÒàÕÜÕ"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr "ÁaÜÞ ÜÞÜÕÝÐâ, ßàØßàÕÜÐÜ ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ßÐÚÕâÐ"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "¸ÝáâÐÛØàÐÜ ßÐÚÕâ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "¿àØåÒÐâØ"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-msgid "Refuse"
-msgstr "¾ÔÑÐæØ"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"¿àÞÜÕÝØâÕ Òaè Cd-Rom!\n"
-"\n"
-"ÃÑÐæØâe Òaè CD Þ×ÝaçÕÝ áÐ \"%s\" ã ßÞÓÞÝ Ø ßàØâØáÝØâÕ \"à àÕÔã\" ÚÐÔa áâÕ "
-"áßàÕÜÝØ.\n"
-"ÃÚÞÛØÚÞ ÓÐ ÝÕÜÐâÕ ßàØâØáÝØâÕ  ¿ÞÝØèâØ."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr "ÁÒÕøÕÔÝÞ ÝÐáâÐÒØâØ ÔÐùÕ ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr "³àÕèÚÐ ã ÛØáâØ ßÐÚÕâÐ:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr "³àÕèÚÐ ßàØ ØÝáâÐÛÐæØjØ ßÐÚÕâa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"ÃßÞ×Þàeúe !\n"
-"\n"
-"¿aÖùØÒÞ ßàÞçØâÐjâÕ ÔÞÛÕ ÝÐÒÕÔÕÝÕ ãáÛÞÒÕ. ÃÚÞÛØÚÞ áÕ ÝÕ áÛaÖÕâÕ áÐ ÑØÛÞ "
-"ÚÞjØÜ \n"
-"ÔÕÛÞÜ, ÞÝÔÐ ÝÕÜÐâÕ ÞÔÞÑàeúÕ ×Ð ØÝáâÐÛØàaúÕ áÛÕÔeûÕÓ CD-a. ¿àØâØáÝØâÕ "
-"'¾ÔÑØjÐÜ' \n"
-"ÔÐ ÑØ ÝÐáâÐÒØÛØ ØÝáâÐÛÐæØjã ÑÕ× ãßÞâàÕÑÕ âØå CD ÜÕÔØja.\n"
-"\n"
-"\n"
-"½ÕÚÕ ÚÞÜßÞÝÕÝâÕ áÐÔàÖÐÝÕ ã áÛÕÔeûØÜ CD ÜÕÔØjÐÜÐ ÝØáã ßÞÔ\n"
-"GPL »ØæÕÝæÞÜ ØÛØ áÛØçÝØÜ ãÓÞÒÞàØÜÐ. ÁÒÐÚÐ âÐÚÒÐ ÚÞÜßÞÝÕÝâÐ jÕ ÞÝÔÐ "
-"ãáÛÞÒùÕÝÐ\n"
-"ãáÛÞÒØÜÐ Ø ãÓÞÒÞàØÜÐ áÞßáâÕÒÕÝÕ ÛØÝæÕÝæÕ. \n"
-"¿aÖùØÒÞ ßàÞçØâÐjâÕ Ø ãßÞ×ÝÐjâÕ áÕ áÐ âÐÚÒØÜ áßÕæØäØçÝØÜ ÛØæÕÝæÐÜÐ ßàe \n"
-"ÝÕÓÞ ãÞâàÕÑØâÕ ØÛØ àÕÔØáâàØÑãØàÐâÕ ßÞÜÕÝãâÕ ÚÞÜßÞÝÕÝâe. \n"
-"ÂÐÚÒÕ ÛØæÕÝæÕ ûÕ ã ÓÛÐÒÝÞÜ ×ÐÑàaúØÒÐâØ âàÐÝáäÕà, ÚÞßØàÐúe \n"
-"(ÞáØÜ ×Ð áÒàåã backup-Ð ßÞÔÐâÐÚa), àÕÔØáàØÑãæØjã, ÝÐåÝÐÔÝã ßàÞÜÕÝã, \n"
-"àÐáâÐÒùaúe, Ôe-ÚÞÜßÐjÛØàaúe ØÛØ ÜeúaúÕ ÚÞÜßÞÝÕÝâØ. \n"
-"±ØÛÞ ÚÞjØ ÔÕÞ ãÓÞÒÞàÐ ÚÞjØ ÝØjÕ ØáßÞèâÞÒÐÝ ØáâÞÒàÕÜÕÝÞ ãÚÛaúÐ Ø ÞáâÐÛÐ ÒaèÐ "
-"ßàÐÒa\n"
-"ã ÔÐâÞj ÛØæÕÝæØ. ÃÚÞÛØÚÞ ÒÐÜ ÞÔàeòÕÝÐ ÛØæÕÝæÐ ÝÕ ÓÐàÐÝâãjÕ âÐÚÒÐ\n"
-"ßàÐÒa, ÞÑØçÝÞ ÝÕ ÜÞÖÕâÕ ØÝáâÐÛØàÐâØ ßàÞÓàÐÜÕ ÝÐ ÒØèÕ ÞÔ jÕÔÐÝÞÓ\n"
-"ÐØÐâÕÜa, ØÛØ Øå ßàØÛÐÓÞÔØâØ ÔÐ áÕ ÜÞÓã ÚÞàØáâØâØ ÝÐ ÜàeÖØ. ÃÚÞÛØÚÞ áâÕ ã "
-"ÔØÛÕÜØ, ÜÞÛØÜÞ ÒÐá ÔÐ ÔØàÕÚâÝÞ \n"
-"ÚÞÝâÐÚâØàÐâÕ ÔØáâàØÑãâÕàÐ ØÛØ ÕÔØâÞàÐ ÚÞÜßÞÝÕÝâe. \n"
-"¿àÕÝÞá ÝÐ âàeûÕ ßàÞÓàÐÜÕ ØÛØ ÚÞßØàaúÕ âÐÚÒØå ÚÞÜßÞÝÕÝâØ ãÚùãçãjãûØ Ø\n"
-"ÔÞÚãÜÕÝâÐæØjã jÕ ÞÑØçÝÞ ×ÐÑàÐúÕÝ.\n"
-"\n"
-"\n"
-"ÁÒÐ ßàÐÒÐ ÝÐ ÚÞÜßÞÝÕÝâÕ ÝÐ áÛÕÔeûØÜ CD ÜÕÔØjÐÜÐ ßàØßÐÔÐjã úØåÞÒØÜ \n"
-"àÕáßÕÚâÐâØÒÝØÜ ÐãâÞàØÜÐ Ø ×aèâØûeÝÕ áã ×ÐÚÞÝØÜÐ Þ ØÝâÕÛÕÚâãÐÝÞj áÒÞjØÝØ Ø \n"
-"ßàÐÒØÜa ÚÞjØ áÕ ßàØÜeúãjã ÝÐ áÞäâÒÕàáÚÕ ßàÞÓàÐÜe.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "XÜ,ßÞjÐÒØÛÐ áÕ ÓàÕèÚÐ"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "´Ð ÛØ ×ÐØáâÐ åÞûÕâÕ ÔÐ ßàÕÚØÝÕâÕ ØÝáâÐÛÐæØøã?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "»¸æÕÝæØàÐÝØ ãÓÞÒÞà"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"ÃßÞ×ÝÐÒaúe\n"
-"\n"
-"¾ßÕàÐâØÒÝØ áØáâÕÜ Ø ÔàãÓÕ ÚÞÜßÞÝÕÝâÕ ÔÞáâãßÝÕ ã Mandrake Linux "
-"ÔØáâàØÑãæØjØ \n"
-"ÝÐ Ôaùe ûÕ ÑØâØ ×ÒÐÝÕ \"ÁÞäâÒÕàáÚØ ¿àÞØ×ÒÞÔØ\" . ÁÞäâÒÕàáÚØ ßàÞØ×ÒÞÔØ "
-"ãkùãçãjã, ÐÛØ ÝØáã Ø \n"
-"ÞÓàÐÝØçÕÝØ Ýa, áÚãß ßàÞÓàÐÜa, ÜÕâÞÔa, ßàÐÒØÛÐ Ø ÔÞÚãÜÕÝâÐæØjã ÚÞjÐ je "
-"ÒÕ×ÐÝa×Ð ÞßÕàÐâØÒÝØ \n"
-"áØáâÕÜ Ø ÔàãÓÕ ÚÞÜßÞÝÕÝâÕ Mandrake Linux ÔØáâàØÑãæØje.\n"
-"\n"
-"\n"
-"1. »ØæÕÝæÝØ ãÓÞÒÞà\n"
-"\n"
-"¿aÖùØÒÞ ßàÞçØâÐjâÕ ÞÒÐj ÔÞÚãÜÕÝâ. ¾ÒÐj ÔÞÚãÜÕÝâ jÕ ÛØæÕÝæÝØ ãÓÞÒÞà "
-"Ø×ÜeòãØ×Üeòã ÒÐá Ø   \n"
-"MandrakeSoft S.A. ÚÞjØ ßÞÛaÖÕ ßàÐÒÞ ÝÐ ÁÞäâÒÕàáÚÕ ¿àÞØ×ÒÞÔe.\n"
-"¸ÝáâÐÛØàaúÕÜ, ÚÞßØàaúÕÜ ØÛØ ãßÞâàÕÑÞÜ ÁÞäâÒÕàáÚØå ¿àÞØ×ÒÞÔÐ ã ÑØÛÞ ÚÞÜ ÒØÔã, "
-"ÒØ ÕÚáßÛØæØâÝÞ \n"
-"ßàØåÒÐâÐâÕ Ø ßÞâßãÝÞ áÕ áÛaÖÕâÕ áÐ ßàØåÒÐâÐúÕÜ ßÞáâÐÒÚØ Ø ãáÛÞÒÐ Ø áâaúÐ ã "
-"ÞÒÞj »ØæÕÝæØ. \n"
-"ÃÚÞÛØÚÞ áÕ ÝÕ áÛaÖÕâÕ áÐ ÑØÛÞ ÚÞjØÜ ÔÕÛÞÜ »ØæÕÝæÕ, ÝÕÜÐâÕ ßàÐÒÞ Ôa "
-"ØÝáâÐÛØàÐâe, ÚÞßØàÐâÕ ØÛØ ÚÞàØáâØâe \n"
-"ÁÞäâÒÕàáÚÕ ßàÞØ×ÒÞÔe. \n"
-"±ØÛÞ ÚÞjØ ßÞÚãèÐj ØÝáâÐÛÐæØje, ÔãßÛØæØàaúÐ ØÛØ ãßÞâàÕÑÕ ÁÞäâÒÕàáÚØå "
-"¿àÞØ×ÒÞÔÐ ÝÐ ÝaçØÝ ÚÞjØ áÕ ÝÕ áÛaÖÕ áa \n"
-"ßÞáâÐÒÚÐÜÐ Ø ãáÛÞÒØÜÐ ÞÒÕ »ØæÕÝæe ûÕ ÒÞÔØâØ ÓãÑØâÚã ÒaèØå ßàÐÒÐ ßÞÔ ÞÒÞÜ \n"
-"»ØæÕÝæÞÜ. ½Ð ÞáÝÞÒã ÓãÑØâÚÐ »ØæÕÝæÕ, ÜÞàÐâÕ ÞÔÜÐå ãÝØèâØâØáÒÕ ÚÞßØje \n"
-"ÁÞäâÒÕàáÚØå ¿àÞØ×ÒÞÔa.\n"
-"\n"
-"\n"
-"2. ¾ÓàÐÝØçÕÝÐ ³ÐàÐÝæØja\n"
-"\n"
-"ÁÞäâÒÕàáÚØ ¿àÞØ×ÒÞÔØ Ø ßàÐâeûÐ ÔÞÚãÜÕÝâàÐæØja áã ÞÜÞÓãûÕÝÕ \"ÚÐÞ âÐÚÒe\", Ø "
-"ÑÕ× ÓÐàÐÝæØje, ÔÞ ÓàÐÝØæa \n"
-"ÚÞjÕ áã ÔÞ×ÒÞùÕÝÕ ×ÐÚÞÝÞÜ.\n"
-"MandrakeSoft S.A. Ýeûe, ã áÒØÜ ãáÛÞÒØÜÐ Ø ã ÓàÐÝØæÐÜÐ ×ÐÚÞÝa, ÑØâØ ÞÓÞÒÞàÐÝ "
-"×Ð ÑØÛÞ ÚÞjÕ áßÕæØjÐÛÝe,\n"
-"áÛãçÐjÝe, ÔØàÕÚâÝe ØÛØ ØÝÔØàÕÚâÝÕ èâÕâÕ (ãÚùãçãjãûØ ÝÕÞÓàÐÝØçÕÝeèâÕâÕ ØÛØ "
-"ÓãÑØâÚe \n"
-"ã ßÞáÛÞÒaúã, ßàÕÚØÔã ßÞáÛÞÒaúa, äØÝÐÝáØjáÚØÜ ÓãÑØæØÜa, ×ÐÚÞÝáÚe âàaÖúÕ Ø "
-"ÚÐ×Ýe ÚÞjÕ áã àÕ×ãÛâÐâ áãÔáÚe \n"
-"ÞÔÛãÚe, ØÛØ ×Ð ÑØÛÞ ÚÞjØ ÔàãÓØ ÓãÑØâÐÚ) ÚÞje ßàÞØ×ØÛÐ×e Ø× ãßÞâàÕÑe ØÛØ "
-"ÝÕÜÞÓãûÝÞáâØ ÚÞàØèûeúÐ ÁÞäâÒÕàáÚØå \n"
-"¿àÞØ×ÒÞÔa, çÐÚ ØÐÚÞ jÕ MandrakeSoft S.A. áÐÒÕâÞÒÐÞ Ø ãÚÐ×ØÒÐÞ ÝÐ ÜÞÓãûÝÞáâ "
-"ßÞjÐÒÕ âÐÚÒe \n"
-"èâÕâÕ.\n"
-"\n"
-"¾ÓàÐÝØçÕÝÐ ÞÔÓÞÒÞàÝÞáâØ ÒÕ×ÐÝe ×a ßÞáÕÔÞÒaúe ØÛØ ãßÞâàÕÑã ×ÐÑàaúÕÝÞÓ "
-"áÞäâÒÕàa ã ÝÕÚØÜ ×eÜùÐÜÐ\n"
-"\n"
-"´Þ ÓàÐÝØæÐ ÚÞjÕ áã ãáÛÞÒùÕÝÕ ×ÐÚÞÝÞÜ, MandrakeSoft S.A. ØÛØ úÕÓÞÒØ "
-"ÔØáâàØÑãâÕàØ ÝeûÕ, ÝØ ßÞÔ ÚÞjØÜ ãáÛÞÒØÜa, ÑØâØ \n"
-"ÞÔÓÞÒÞàÝØ ×Ð áßÕæØjÐÛÝÕ, ÝÐÜÕàÝÕ ÔØàÕÚâÝÕ ØÛØ ØÝÔØàÕÚâÝe èâÕâÕ(ãÚùãçãjãûØ "
-"ÝÕÞÓàÐÝØçÕÝe \n"
-"èâÕâÕ ØÛØ ÓãÑØâÚe ã ßÞáÛÞÒaúã, ßàÕÚØÔã ßÞáÛÞÒaúa, äØÝÐÝáØjáÚØÜ ÓãÑØæØÜa, "
-"×ÐÚÞÝáÚe âàaÖúÕ \n"
-"Ø ÚÐ×Ýe ÚÞjÕ áã àÕ×ãÛâÐâ áãÔáÚe ÞÔÛãÚe, ØÛØ ×Ð ÑØÛÞ ÚÞjØ ÔàãÓØ ÓãÑØâÐÚ) ÚÞje "
-"ßàÞØ×ØÛÐ×e \n"
-"Ø× ãßÞâàÕÑe ØÛØ ÝÕÜÞÓãûÝÞáâØ ÚÞàØèûeúÐ ÁÞäâÒÕàáÚØå ºÞÜßÞÝÕÝâØ ØÛØ ÚÞje "
-"ßàÞØ×ØÛÐ×e download-ÞÒÐÝØå áÞäâÒÕàáÚØå ÚÞÜßÞÝÕÝâØ \n"
-"ÑØÛÞ ÚÞÓ Mandrake Linux áÐjâÐ ÚÞjØ áã ×ÐÑàaúÕÝØ ØÛØ ÞÓàÐÝØçÕÝØ ã ÝÕÚØÜ "
-"×ÕÜùÐÜÐ ßÞ ÛÞÚÐÛÝØÜ ×ÐÚÞÝØÜa.\n"
-"¾ÒÐ ÞÓàÐÝØçÕÝÐ ßàÐÒÐ áÕ ßàØÜeúãjã, ÐÛØ ÝØáã Ø ÞÓàÐÝØçÕÝÐ Ýa,ÚàØßâÞÓàÐäáÚÕ "
-"ÚÞÜßÞÝÕÝâe \n"
-"ÚÞjÕ áÕ ÝÐÛÐ×Õ ã ÁÞäâÒÕàáÚØÜ ¿àÞØ×ÒÞÔØÜa.\n"
-"\n"
-"\n"
-"3. GPL Ø ×Ð úã ÒÕ×ÐÝÕ »ØæÕÝæe\n"
-"\n"
-"ÁÞäâÒÕàáÚØ ßàÞØ×ÒÞÔØ áÕ áÐáâÞje ÞÔ ÚÞÜßÞÝÕÝâØ ÚàÕØàÐÝØå ÞÔ áâàÐÝÕ àÐ×ÛØçâØå "
-"ÛØæÐ ØÛØ ÕÝâØâÕâa. ²eûØÝa  \n"
-"ÞÔ ÞÒØå ÚÞÜßÞÝÕÝâØ áÕ ÝÐÛÐ×Õ ßÞÔ ßÞáâÐÒÚÐÜÐ Ø ãáÛÞÒØÜÐ GNU ¾ßèâÕ JÐÒÝe \n"
-"»ØæÕÝæe, ÚÞjÐ áÕ ÞÔ áÐÔÐ ×ÞÒÕ  \"GPL\", ØÛØ áÛØçÝÕ ÛØæÕÝæÕ. ²eûØÝÐ ÞÒØå "
-"ÛØæÕÝæØ ÔÞ×ÒÞùÐÒÐ ãßÞâàÕÑã, \n"
-"ÔãßÛØæØàaúe, ÐÔÐßâÐæØjã ØÛØ àÕÔØáâàØÑãæØjã ÚÞÜßÞÝÕÝâØ ÚÞjÕ ÞÝÕ ÞÑãåÒÐâÐjã. "
-"¼ÞÛØÜÞ ²Ðá ÔÐ ßaÖùØÒÞ ßàÞçØââÕ ßÞáâÐÒÚe \n"
-"Ø ãáÛÞÒÕ ÛØæÕÝæÝÞÓ ãÓÞÒÞàÐ ×Ð áÒÐÚã ÚÞÜßÞÝÕÝâã ßàÕ ãßÞâàÕÑÕ ÑØÛÞ ÚÞje "
-"ÚÞÜßÞÝÕÝÕâe. ±ØÛÞ ÚÞjÕ ßØâaúe \n"
-"ÒÕ×ÐÝÞ ×Ð ÛØæÕÝæã ÚÞÜßÞÝÕÝâØ âàÕÑÐ ÔÐ ÑãÔÕ ÐÔàÕáØàÐÝÞ ÝÐ ÐãâÞàÐ ÚÞÜßÞÝÕÝâÕ Ð "
-"ÝÕÝa MandrakeSoft.\n"
-"¿àÞÓàÐÜØ ÚÞjÕ jÕ àÐ×ÒØÞ MandrakeSoft S.A. ßÞÔÛeÖã ßÞÔ GPL »ØæÕÝæã. "
-"´ÞÚãÜÕÝâÐæØjÐ ßØáÐÝÐ ÞÔ \n"
-"áâàÐÝÕ MandrakeSoft S.A. ßÞÔÛeÖÕ ßÞÔ ßÞáÕÑÝã ÛØæÕÝæã. ¼ÞÛØÜ ÔÐ ßÞÓÛÕÔÐâÕ "
-"ÔÞÚãÜÕÝâÐæØjã  \n"
-"×Ð ÔÕâaùe.\n"
-"\n"
-"\n"
-"4. ¿àÐÒÐ ÝÐ ¸ÝâÕÛÕÚâãÐÛÝã áÒÞjØÝã\n"
-"\n"
-"ÁÒÐ ßàÐÒÐ ÝÐ ÚÞÜßÞÝÕÝâÕ ÁÞäâÒÕàáÚØå ßàÞØ×ÒÞÔÐ ßàØßÐÔÐjã úØåÞÒØÜ ÐãâÞàØÜÐ Ø "
-"ÞÝa \n"
-"áã ×aèâØûeÝÐ ×ÐÚÞÝØÜÐ Þ ØÝâÕÛÕÚâãÐÛÝÞj áÒÞjØÝØ Ø ßàÐÒØÜÐ ÚÞjØ áÕ ßàØÜeúãjã "
-"ÝÐ áÞäâÒÕàáÚe ßàÞÓàÐÜe.\n"
-"MandrakeSoft S.A. jÕ àÕ×ÕàÒØáÐÞ áÒÞjÐ ßàÐÒÐ ÝÐ ÜÞÔØäØÚÞÒaúÕ ØÛØ ÐÔÐßâÐæØjã "
-"ÁÞäâÒÕàáÚØå¿àÞØ×ÒÞÔa, ÚÐÚÞ ×Ð æÕÛØÝã âÐÚÞ Ø ×a \n"
-"ÔÕÛÞÒe, ×Ð áÒÕ áÒÕ áÒàåÕ Ø áÒÕ ãßÞâàÕÑe.\n"
-"\"Mandrake\", \"Mandrake Linux\" Ø ßàØÔàãÖÕÝØ ÛÞÓÞâØßØ Ø Þ×ÝÐÚe MandrakeSoft "
-"S.A.  \n"
-"\n"
-"\n"
-"5. ·ÐÚÞÝáÚÐ ßàÐÒa \n"
-"\n"
-"ÃÚÞÛØÚÞ áÕ ÑØÛÞ ÚÞjØ ÔÕÞ ÞÒÞÓ ãÓÞÒÞàÐ Ø×ÑÕÓÐÒa, ÝÕÛÕÓÐÛÝÞ Ø ÒÐÝ  áãÔáÚÕ "
-"ÞÔÛãÚe, ÞÒÐj \n"
-"ÔÕÞ áÕ ØáÚùãçãjÕ Ø× ÞÒÞÓ ãÓÒÞàa. ¾ÑÐÒÕ×ÝØ áâÕ Ôa ßàØÜeúãjÕâeÞáâÐÛÕ ÔÕÛÞÒe "
-"ÞÒÞÓ\n"
-"ãÓÞÒÞàa.\n"
-"¿ÞáâÐÒÚÕ Ø ãáÛÞÒØ ÞÒÕ »ØæÕÝæÕ áã ÞÔàÕòÕÝØ ·ÐÚÞÝØÜÐ ÄàÐÝæãáÚe.\n"
-"ÁÒØ ÝÕáßÞàÐ×ãÜØ ÑØ âàÕÑÐÛØ ÑØâØ àeèÕÝØ ÒÐÝ áãÔa. ºÐÞ ßÞáÛÕÔúÕ \n"
-"áàÕÔáâÒÞ, ÝÕáßÞàÐ×ãÜØ ûÕ ÑØâØ ãßuûÕÝØ ÝÐ ÞÔÓÞÒÐàÐjãûÕ ÁãÔáÚÕ ãáâÐÝÞÒÕ ã "
-"¿ÐàØ×ã - ÄàÐÝæãáÚa.\n"
-"·Ð ÑØÛÞ ÚÞjÕ ßØâaúÕ ÚÞjÕ jÕ ÒÕ×ÐÝÞ ×Ð ÞÒÐj ÔÞÚãÜÕÝâ, ÚÞÝâÐÚâØàÐjâÕ  "
-"MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "ÂÐáâÐâãàa"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "¸×ÐÑÕàØâÕ  àÐáßÞàÕÔ âÐáâÐâãàÕ."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "¾ÒÔÕ jÕ ßàÕÔáâÐÒùÕÝa æÕÛÐ ÛØáâÐ ÔÞáâãßÝØå âÐáâÐâãàa"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "ºÞjã  ØÝáâÐÛÐæØÞÝã ÚÛÐáã ÑØàÐâÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "¸ÝáâÐÛÐæØøÐ/°ÖãàØàÐúÕ"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "´Ð ÛØ øÕ ÞÒÞ ØÝáâÐÛÐæØøÐ ØÛØ aÖãàØàÐúÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "¿àÕßÞàãçÕÝÞ"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "µÚáßÕàâ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "°ÖãàØàÐúÕ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "°ÖãàØàÐúÕ áÐÜÞ ßÐÚÕâÐ"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "¸×ÐÑÕàØâe âØß ÜØèÐ."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "¿Þàâ ×Ð ÜØèÐ"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "¸×ÐÑÕàØâÕ ÝÐ ÚÞøØ áÕàØøáÚØ ßÞàâ øÕ ÒÐè ÜØè ßàØÚùãçÕÝ."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "µÜãÛÐæØjÐ âÐáâÕàa"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "µÜãÛÐæØjÐ 2 âÐáâÕàa"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "µÜãÛÐæØÙÐ 3 âÐáâÕàa"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "ºÞÝäØÓãàØèÕÜ PCMCIA ÚÐàâØæÕ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "KÞÝäØÓãàÐæØøÐ  IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr "ÝÕÜÐ ÔÞáâãßÝØå ßÐàâØæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "ÁÚÕÝØàaúÕ ßÐàâØæØjÐ ×Ð ßàÞÝÐÛaÖeúÕ âaçÚÕ ÜÞÝâØàaúa"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "¸×ÐÑÕàØâÕ âÐçÚÕ ÜÞÝâØàÐúÐ"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"½Õ ÜÞÓã ßàÞçØâÐâØ âÐÑÕÛã ßÐàâØæØøÐ, ÜÝÞÓÞ øÕ ØáÚÒÐàÕÝÐ ×Ð ÜÕÝÕ :(\n"
-"¿ÞÚãèÐûã ÔÐùÕ ×ÐÞÑØÛÐ×ÕûØ ÛÞèÕ ßÐàâØæØøÕ¼ÞÓã ßÞÚãèÐâØ ÔÐ äÞàÜÐâØàÐÜ ÛÞèÕ "
-"ßÐàâØæØje (Á²¸ ¿¾´°Æ¸ ûÕ ÑØâØ Ø×ÓãÑùÕÝØ !).\n"
-"´àãÓÞ àeèeúÕ jÕ ÔÐ áÕ DrakX ÞÝÕÜÞÓãûØ ÔÐ ÜÞÔãäØÚãje âÐÑÕÛã ßÐàâØæØja.\n"
-"(ÓàeèÚÐ je %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ÝÕ ÜÞÖÕ ÔÐ ØáßàÐÒÝÞ ßàÞçØâÐ âÐÑÕÛã ßÐàâØæØøÐ.\n"
-"´ÐùØ ÝÐáâÐÒÐÚ ØÔÕ ÝÐ ÒÐè àØ×ØÚ !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"½ÕÜÐ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ ×Ð 1MB bootstrap! ¸ÝáâÐÛÐæØøÐ òÕ áÕ ÝÐáâÐÒØâØ, ÐÛØ "
-"ÔÐ ÑØ ßÞÔØÓÛØ ÒÐèáØáâÕÜ, ÜÞàÐòÕâÕ ÔÐ ÚàÕØàÐâÕ bootstrap ßÐàâØæØøã ã "
-"DiskDrake-ã"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "½ØøÕ root ßÐàâØæØøÕ ßÞâàÕÑÝÕ ×Ð ÐÖãàØàÐúÕ"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root ßÐàâØæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "½Ð ÚÞøÞø ßÐàâØæØøØ øÕ root ßÐàâØæØøÐ (/) ÒÐèÕÓ áØáâÕÜÐ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "ÂàÕÑÐ ÔÐ àÕáÕâãøÕâÕ ÜÐèØÝã ×Ð ßàØÜÕÝã Ø×ÜÕÝÐ ã âÐÑÕÛØ ßÐàâØæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "¸×ÐÑÕàØ ßÐàâØæØøÕ ×Ð äÞàÜÐâØàÐúÕ"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "¿àÞÒÕàØ ÛÞèÕ ÑÛÞÚÞÒÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "ÄÞàÜÐâØàÐúÕ ßÐàâØæØøã"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "ºàÕØàaúÕ Ø äÞàÜÐâØàaúÕ ÔÐâÞâÕÚe %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ swap-Ð ÔÐ ×ÐÒàèØ ØÝáâÐÛÐæØøã, ÔÞÔÐøâÕ øÞè swap-Ð"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr "ÂàÐÖØÜ ßÐÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr "ÂàÐÖØÜ ßÐÚÕâÕ ×Ð ÐÖãàØàÐúÕ..."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "²aè áØáâÕÜ ÝÕÜÐ ÔÞÒÞùÝÞ ÜÕáâÐ ×Ð ØÝáâÐÛÐæØjã ØÛØ aÖãàØàaúe (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"¼ÞÛØÜ ²Ðá ÔÐ Ø×ÐÑÕàÕâÕ ãçØâÐÒÐúÕ ØÛØ áÝØÜÐúÕ áÕÛÕÚæØøÕ ßÐÚÕâÐ ÝÐ ÔØáÚÕâã.\n"
-"ÄÞàÜÐâ ÚÞøØ áÕ ÚÞàØáâØ øÕ ØáâØ ÚÐÞ Ø ÚÞÔ  auto_install ÓÕÝÕàØáÐÝØå ÔØáÚÕâÐ."
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr "ÃçØâÐø áÐ ÔØáÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr "ÃçØâÐÒÐÜ áÐ ÔØáÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr "¾ÔÐÑØà ßÐÚÕâÐ"
-
-#: ../../install_steps_interactive.pm_.c:548
-msgid "Insert a floppy containing package selection"
-msgstr "ÃÑÐæØâÕ ÔØáÚÕâã ÚÞøÐ áÐÔàÖØ áÕÛÕÚæØøã ßÐÚÕâÐ"
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr "ÁÝØÜØ ÝÐ ÔØáÚÕâã"
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr "ÁÕÛÕÚâÞÒÐÝÐ ÒÕÛØçØÝÐ øÕ ÒÕòÐ ÞÔ áÛÞÑÞÔÝÞÓ ßàÞáâÞàÐ"
-
-#: ../../install_steps_interactive.pm_.c:641
-msgid "Type of install"
-msgstr "ÂØß ØÝáâÐÛÐæØøÕ"
-
-#: ../../install_steps_interactive.pm_.c:642
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"½ØáâÕ áÕÛÕÚâÞÒÐÛØ ÝØøÕÔÝã Óàãßã ßÐÚÕâÐ\n"
-"¸×ÐÑÕàØâÕ ÜØÝØÜÐÛÝã ØÝáâÐÛÐæØøã ÚÞøã ÖÕÛØâÕ"
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr "ÁÐ X-ÞÒØÜÐ"
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr "ÁÐ ÞáÝÞÒÝÞÜ ÔÞÚãÜÕÝâÐæØøÞÜ (ßàÕßÞàãÚÐ!)"
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "ÁâÒÐàÝÞ ÜØÝØÜÐÛÝÐ ØÝáâÐÛÐæØøÐ (ßÞáÕÑÝÞ ÑÕ× urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"ÃÚÞÛØÚÞ ØÜaâÕ ÓÞàÕ ÝÐÒÕÔÕÝÕ CD-ÞÒe, ÚÛØÚÝØâÕ ÝÐ  Ok.\n"
-"ÃÚÞÛØÚÞ ÝÕÜÐâÕ ÝØjÕÔÐÝ CD, ÚÛØÚÝØâÕ ÝÐ  Cancel.\n"
-"°ÚÞ ÒÐÜ ÝÕÔÞáâÐjã  áÐÜÞ ÝÕÚØ CD-ÞÒØ , ÔÕáÕÛÕÚâãjâe Øx, Ð ÞÝÔÐ ÚÛØÚÝØâÕ ÝÐ Ok."
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom Þ×ÝaçÕÝ ÚÐÞ \"%s"
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr "¿àØßàÕÜÐÜ ØÝáâÐÛÐæØøã"
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"¸ÝáâÐÛØàÐÜ ßÐÚÕâÕ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr "¿ÞáâØÝáâÐÛÐæØÞÝÐ ÚÞÝäØÓãàÐæØøa"
-
-#: ../../install_steps_interactive.pm_.c:818
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ÃÑÐæØâÕ Boot ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_steps_interactive.pm_.c:824
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ÃÑÐæØâÕ Update Modules ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"·ÑÞÓ àÐ×ÛØçØâØå ÞßèâØx ×ÐåâÕÒÐ ÚÞjØ áÕ ÞÔÝÞáÕ ÝÐ ÞÒÐj  áÞäâÒÕà  ÚÐÞ Ø "
-"Ø×ÛÞÖÕÝÞáâ\n"
-"ÜÝÞÓØÜ ×ÐÚÞÝÞÔÐÒáâÒØÜÐ,ÚãßÐæ Ø/ØÛØ ÚÞàØáÝØÚ áÞäâÒÕàÐ âàÕÑÐ\n"
-"ÔÐ ßàÞÒÕàØ ÔÐ ÛØ ×ÐÚÞÝ ÞÜÞÓãûÐÒÐ  download Ø ãßÞâàÕÑã áÞäâÒÕàÐ.\n"
-"\n"
-"ºãßæØ  Ø ÚÞàØáÝØæØ âàÕÑÐ ÔÐ ×ÝÐjã ÔÐ ÝÕ âàÕÑÐÔÐ Ø×ÒàÔÐÒÐjã\n"
-"×ÐÚÞÝ.ÃÚÞÛØÚÞ áÕ âÞ  ØßÐÚ ÔeáØ, ÞÝØ  ûÕ áÝÞáØâØ áÐÝÚæØje\n"
-"\n"
-"MandrakeSoft ÝØjÕ ÞÔÓÞÒÞàÐÝ ×Ð ÑØÛÞ ÚÐÚÒÕ ÓãÑØâÚÕ ØÛØ èâÕâÕÚÞjÕ ÜÞÓã ÝÐáâÐâØ,"
-"ÝØâØ ×Ð áãÔáÚÕ ÚÐ×ÝÕ ÚÞjÕ áÕ ÜÞÓã jÐÒØâØ.\n"
-"\n"
-"\n"
-"·Ð ÑØÛÞ ÚÐÚÒÐ ßØâaúÐ ÒÕ×ÐÝÐ ×Ð ÞÒã âÕÜã ÚÞÝâÐÚâØàÐjâe \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:883
-#, fuzzy
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"ÁÐÔÐ ØÜÐâÕ ÜÞÓãûÝÞáâ ÔÐ download-ãøÕâÕ ÐÖãàØàÐÝÕ ßÐÚÕâÕ ÚÞøØ áã\n"
-"ÚàÕØàÐÝØ ÝÐÚÞÝ Ø×ÛÐáÚÐ ÔØáâàØÑãæØøÕ.\n"
-"\n"
-"´ÞÑØûÕâÕ áØÓãàÝÞáÝÕ ØáßàÐÒÚÕ ØÛØ ØáßàÐÒÚÕ ã ßàÞÓàÐÜØÜÐ, ÐÛØ ×Ð ÔÐ ÑØ ÞÒÞ "
-"ãàÐÔØÛØ ÜÞàÐâÕ\n"
-"ÔÐ ØÜÐâÕ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØøã.\n"
-"\n"
-"ÔÐ ÛØ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ update-ÞÒÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:898
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"º¾ÝâÐÚâØàÐøâÕ Mandrake Linux web áÐøâ ÔÐ ÑØ ÔÞÑØÛØ ÛØáâã ÔÞáâãßÝØå mirror-Ð"
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr "¸×ÐÑÕàØâÕ mirror áÐ ÚÞÓ ûÕâÕ áÚØÝãâØ ßÐÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "ºÐÝâÐÚâØàÐøâÕ mirror ×Ð ÛØáâã ÜÞÓãûØå ßÐÚÕâÐ"
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr "ºÞjÐ jÕ ÒaèÐ ÒàÕÜÕÝáÚÐ ×ÞÝa ?"
-
-#: ../../install_steps_interactive.pm_.c:944
-msgid "Hardware clock set to GMT"
-msgstr "²Ðè áØáâÕÜáÚØ (BIOS) çÐáÞÒÝØÚ øÕ ßÞÔÕèÕÝ ÝÐ GMT"
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr "°ãâÞÜÐâáÚÐ áØÝåàÞÝØ×ÐæØøÐ ÒàÕÜÕÝÐ (ßàÕÚÞ NTP-Ð)"
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr "NTP ÁÕàÒÕà"
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Remote CUPS server"
-msgstr "ÃÔÐùÕÝØ CUPS áÕàÒÕà"
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "No printer"
-msgstr "±Õ× èâÐÜßÐça"
-
-#: ../../install_steps_interactive.pm_.c:1004
-msgid "Do you have an ISA sound card?"
-msgstr "´Ð ÛØ ØÜÐâÕ ISA ×ÒãçÝã ÚÐàâØæã?"
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"¿ÞÚàÕÝØâÕ \"sndconfig\" ÝÐÚÞÝ ØáÝâÐÛÐæØøÕ ÔÐ ÑØ ßÞÔÕáØÛØ áÒÞøã ×ÒãçÝã ÚÐàâØæã"
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"½ØøÕ ÔÕâÕÚâÞÒÐÝÐ ×ÒãçÝÐ ÚÐàâØæÐ. ¿ÞÚàÕÝØâÕ \"harddrake\" ÝÐÚÞÝ ØÝáâÐÛÐæØøÕ"
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "ÁaÖÕâÐÚ"
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr "¼Øè"
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr "²àÕÜÕÝáÚÐ ×ÞÝa"
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr "ÈâÐÜßÐç"
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr "ISDN ÚÐàâØæa"
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr "·ÒãçÝÐ ÚÐàâØæa"
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr "TV ÚÐâØæa"
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr "»ÞÚÐÛÝÕ ÔÐâÞâÕÚÕ"
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "ÃÝÕáØ root ÛÞ×ØÝÚã"
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr "±Õ× ÛÞ×ØÝÚÕ"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "¾ÒÐ ÛÞ×ØÝÚÐ jÕ áãÒØèe jÕÔÝÞáâÐÒÝa (âàÕÑÐ Ôa ØÜÐ ÑÐà %d ×ÝÐÚÞÒÐ)"
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "°ãâÕÝâØäØÚÐæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:1098
-msgid "Authentication LDAP"
-msgstr "LDAP °ãâÕÝâØäØÚÐæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr "LDAP ÁÕàÒÕà"
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr "NIS °ãâÕÝâØäØÚÐæØøÐ"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr "NIS ´ÞÜÕÝ"
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr "NIS ÁÕàÒÕà"
-
-#: ../../install_steps_interactive.pm_.c:1143
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"ÁâÐàâÝØ ÔØáÚ ÞÑÕ×ÑÕòãøÕ ÝÐçØÝ ßÞÔØ×ÐúÐ ÒÐèÕÓ »ØÝãÚá áØáâÕÜÐ ÑÕ× ×ÐÒØáÝÞáâØ\n"
-"ÞÔ ÝÞàÜÐÛÝÞÓ áâÐàâÕàa. ¾ÒÞ øÕ ÚÞàØáÝÞ ÐÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ\n"
-"SILO(ØÛØ grub) ÝÐ ÒÐè áØáâÕÜ, ÐÚÞ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜ ãÚÛÞÝØ SILO, ØÛØ "
-"SILO ÝÕ\n"
-"àÐÔØ áÐ ÒÐèØÜ åÐàÔÒÕàÞÜ. ÁâÐàâÝØ ÔØáÚ ÜÞÖÕâÕ ÚÞàØáâØâØ áÐ Mandrake Linux\n"
-"'ÔØáÚÞÜ ×Ð áßÐáÐÒÐúÕ', èâÞ ÞÛÐÚèÐÒÐ ÞßÞàÐÒÐÚ ã áÛãçÐøã âÕÖÕ åÐÒÐàØøÕ.\n"
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÚàÕØàÐâÕ áâÐàâÝã ÔØáÚÕâã ×Ð ÒÐè áØáâÕÜãÑÐæØâÕ ÔØáÚÕâã ã "
-"ßÞÓÞÝ Ø ßàØâØáÝØâÕ \"´Ð\"."
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr "¿àÒØ äÛÞßØ/ÔØáÚÕâÝØ ãàeòÐj "
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr "´àãÓØ äÛÞßØ/ÔØáÚÕâÝØ ãàeòÐj"
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr "¿àÕáÚÞçØ"
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"ÁâÐàâÝØ ÔØáÚ ÞÑÕ×ÑÕòãøÕ ÝÐçØÝ ßÞÔØ×ÐúÐ ÒÐèÕÓ »ØÝãÚá áØáâÕÜÐ ÑÕ× ×ÐÒØáÝÞáâØ\n"
-"ÞÔ ÝÞàÜÐÛÝÞÓ áâÐàâÕàa. ¾ÒÞ øÕ ÚÞàØáÝÞ ÐÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ØÝáâÐÛØàÐâÕ\n"
-"LILO(ØÛØ grub) ÝÐ ÒÐè áØáâÕÜ, ÐÚÞ ÔàãÓØ ÞßÕàÐâØÒÝØ áØáâÕÜ ãÚÛÞÝØ LILO, ØÛØ "
-"LILO ÝÕ\n"
-"àÐÔØ áÐ ÒÐèØÜ åÐàÔÒÕàÞÜ. ÁâÐàâÝØ ÔØáÚ ÜÞÖÕâÕ ÚÞàØáâØâØ áÐ Mandrake Linux\n"
-"'ÔØáÚÞÜ ×Ð áßÐáÐÒÐúÕ', èâÞ ÞÛÐÚèÐÒÐ ÞßÞàÐÒÐÚ ã áÛãçÐøã âÕÖÕ åÐÒÐàØøÕ.\n"
-"´Ð ÛØ ÑØáâÕ ÔÐ ÚàÕØàÐâÕ áâÐàâÝã ÔØáÚÕâã ×Ð ÒÐè áØáâÕÜ?"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ÿ¾·¾Àµªµ! ²Ø ÚÞàØáâØâÕ XFS ×Ð ÒÐèã root ßÐàâØæØøã,\n"
-"ßÐ ÚàÕØàÐúÕ áâÐàâÝÞÓ 1.44 Mb äÛÞßØøÐ ÒÕàÞÒÐâÝÞ ÝÕûÕ ãáßÕâØ,\n"
-"×ÐâÞ èâÞ XFS âàÐÖØ ÒÕÛØÚØ ÔàÐøÒÕà)."
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr "ÂØ ÜÐÛÕàÐ, ÝÕÜÐ ÔØáÚÕâe"
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"¸×ÐÑàÕàØâÕ ÔØáÚÕâÝØ ãàÕòÐø ÚÞøØ ûÕâÕ ÚÞàØáâØâØ  ×Ð ÚàÕØàÐúÕ áâÐàÝÕ ÔØáÚÕâÕ"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "ÃÑÐæØâÕ ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr "ºàÕØàÐÜ áâÐàâÝØ ÔØáÚ..."
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr "¿àØßàÕÜÐÜ áâÐàâÕà..."
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"¿ÞèâÞ Ø×ÓÛÕÔÐ ÔÐ ØÜÐâÕ áâÐàÞÜÞÔÝã ØÛØ ÝÕßÞ×ÝÐâã \n"
-" ÜÐèØÝã, yaboot áâÐàâÕà ÝÕòÕ àÐÔØâØ ÚÞÔ ÒÐá.\n"
-"¸ÝáâÐÛÐæØøÐ òÕ ÑØâØ ÝÐáâÐÒùÕÝÐ, ÐÛØ òÕâÕ ÜÞàÐâØ ÔÐ\n"
-" BootX ÔÐ ÑØ ßÞÔØÓÛØ áØáâÕÜ"
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"³àeèÚÐ ßàØ ØÝáâÐÛÐæØjØ aboot-a, \n"
-"´Ð ÛØ Ôa ßàÞÑÐÜ ÔÐ ØÝáâÐÛØàÐÜ çÐÚ ÐÚÞ âÞ ÒÞÔØ ãÝØèâeúã ßàÒÕ ßÐàâØæØje?"
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr "¸ÝáâÐÛØàÐÜ áâÐàâÕà"
-
-#: ../../install_steps_interactive.pm_.c:1231
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "¸ÝáâÐÛÐæØøÐ áâÐàâÕàa ÝÕãáßÕÛÐ. ³àÕèÚÐ øÕ:"
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"¼ÞàaûÕâÕ ÔÐ ßàÞÜÕÝØâÕ Open Firmware boot-ãàeòÐj ÔÐ \n"
-" ÑØ ÜÞÓÛØ ÔÐ ÚÞàØáâØâÕ áâÐàâÕà.  ÃÚÞÛØÚÞ ÝÕ ÒØÔØâÕ ßàÞÜßâ\n"
-" ßàØ àÕáâÐàâã ÔàÖØâÕ Command-Option-O-F ßàØ áâÐàâaúã Ø ãÝÕáØâe:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" ¾ÝÔÐ ãÚãæÐjâe: shut-down\n"
-"ºÐÔÐ áÛÕÔeûØ ßãâ áâÐàâãjÕâÕ ÜaèØÝã âàÕÑÐÛØ ÑØ ÔÐ ÒØÔØâÕ áâÐâÕàÞÒ ßàÞÜßâ."
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ÃÑÐæØâÕ ßàÐ×Ýã ÔØáÚÕâã ã ãàÕòÐø %s"
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr "ºàÕØàÐÜ ÐãâÞ ØÝáâÐÛÐæØÞÝØ äÛÞßØ"
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"½ÕÚØ ÚÞàÐæØ ÝØáã ÚÞÜßÛÕâØàÐÝØ.\n"
-"\n"
-"´Ð ÛØ áâÒÐàÝÞ ÖÕÛØâÕ ÔÐ ×ÐÒàèØâÕ ?"
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ÇÕáâØâÐÜÞ, ØÝáâÐÛÐæØøÐ øÕ ×ÐÒàèÕÝÐ.\n"
-"¸×ÒÐÔØâÕ ÔØáÚÕâã Ø× ÔàÐøÒÐ Ø ßàØâØáÝØâÕ <Enter> ÔÐ áÕ àÐçãÝÐà àÕáÕâãøÕ.\n"
-"\n"
-"\n"
-"·Ð ØÝäÞàÜÐæØøÕ Þ ßÞßàÐÒÚÐÜÐ ÚÞøÕ áã ÝÐ àÐáßÞÛÐÓÐúã ×Ð ÞÒÞ Ø×ÔÐúÕ\n"
-"Mandrake Linux »ØÝãÚáÐ, ßàÞçØâÐøâÕ ÔÕÞ 'Errata' ÚÞøØ ÜÞÖÕâÕ ÝÐûØ ÝÐ\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"¸ÝäÞàÜÐæØøÕ Þ ÚÞÝäØÓãàØáÐúã ÒÐèÕÓ áØáâÕÜÐ ÜÞÖÕâÕ ÝÐûØ ã ßÞáâ-ØÝáâÐÛÐæØÞÝÞÜ\n"
-"ßÞÓÛÐÒùã ×ÒÐÝØçÝÞÓ Mandrake Linux '²ÞÔØçÐ ×Ð ÚÞàØáÝØÚÕ'."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid "Generate auto install floppy"
-msgstr "ºàÕØàÐj ÐãâÞ ØÝáâÐÛÐæØÞÝã ÔØáÚÕâã"
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"°ãâÞ ØÝáâÐÛÐæØjÐ ÜÞÖÕ ÑØâØ ßÞâßãÝÞ ÐãâÞÜÐâØ×ÞÒÐÝÐ ãÚÞÛØÚÞ ÖÕÛØâe,\n"
-"ã âÞÜ áÛãçÐjã ßàÕã×eûÕ ÚÞÝâàÞÛã ÝÐÔ åÐàÔ-ÔØáÚÞÜ!!\n"
-"(ÞÒÞ áÕ ÞÔÝÞáØ ÝÐ ØÝáâÐÛÐæØjã ÝÐ ÔàãÓÞj ÜaèØÝØ).\n"
-"\n"
-"¼ÞÖÔÐ ÒÞÛØâÕ ÔÐ ßÞÝÞÒØâÕ ØÝáâÐÛÐæØjã.\n"
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr "°ãâÞÜÐâáÚØ"
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Replay"
-msgstr "¿ÞÝaÒùaúe"
-
-#: ../../install_steps_interactive.pm_.c:1336
-msgid "Save packages selection"
-msgstr "ÁaçãÒÐj áÕÛÕÚæØjã ßÐÚÕâa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ¸ÝáâÐÛÐæØøÐ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt-Tab> ÚàÕâ. Ø×ÜÕòã ÕÛÕÜÕÝÐâa | <Space> Ø×ÑÞà | <F12> áÛÕÔÕûØ ÕÚàÐÝ"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ÝÕÔÞáâÐjÕ kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "¸×ÐÑÕàØâÕ äÐøÛ"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "½ÐßàÕÔÝÞ"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "¾áÝÞÒÝÞ"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "ÁÐÜÞ ÜÞÜÕÝÐâ..."
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "»Þè Ø×ÑÞà, ßàÞÑÐøâÕ ßÞÝÞÒÞ\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "²Ðè Ø×ÑÞà ? (ßÞ default-ã %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"ÃÝÞáØ ÚÞøÕ âàÕÑÐ ÔÐ ßÞßãÝØâÕ:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "²Ðè Ø×ÑÞà? (0/1, default `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "ÂÐáâÕà `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button?"
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ ÚÛØÚÝÕâÕ ÝÐ ÞÒÐø âÐáâÕà? "
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "²Ðè Ø×ÑÞà? (default `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> ¿ÞáâÞøØ ÜÝÞÓÞ áâÒÐàØ ×Ð Ø×ÑÞà Ø× (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"¸×ÐÑÕàØâÕ ßàÒØ ÑàÞø ÞÔ 10 ÚÞøÕ ÖÕÛØâÕ ÔÐ ÕÔØâãøÕâÕ,\n"
-"ØÛØ áÐÜÞ ÚÛØÚÝØâÕ ÝÐ Enter ÔÐ ÑØ ÝÐáâÐÒØÛØ.\n"
-"²Ðè Ø×ÑÞà? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> ½ÐßÞÜÕÝÐ, ßàÞÜÕúÕÝÞ ØÜÕ:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Re-submit"
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr "ÇÕèÚØ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr "½ÕÜÐçÚØ"
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr "´ÒÞàÐÚ"
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr "ÈßÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr "ÄØÝáÚØ"
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr "ÄàÐÝæãáÚØ"
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr "½ÞàÒÕèÚØ"
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr "¿ÞùáÚØ"
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr "ÀãáÚØ"
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr "ÈÒÕÔáÚØ"
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr "UK âÐáâÐâãàa"
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr "US âÐáâÐâãàa"
-
-#: ../../keyboard.pm_.c:211
-msgid "Albanian"
-msgstr "°ÛÑÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr "¨ÕàÜÕÝáÚØ (áâÐàØ)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr "¨ÕàÜÕÝáÚØ (typewriter)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr "¨ÕàÜÕÝáÚØ (äÞÝÕâáÚØ)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr "°×ÕàÑejÔ×ÐÝ  (ÛÐâØÝØæÐ)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr "±ÕÛÓØøáÚØ"
-
-#: ../../keyboard.pm_.c:222
-msgid "Bulgarian (phonetic)"
-msgstr "±ãÓÐàáÚØ (äÞÝÕâáÚØ)"
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr "±ãÓÐàáÚØ (BDS)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr "±àÐ×ØÛáÚØ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:225
-msgid "Belarusian"
-msgstr "±ÕÛÞàãáÚØ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr "ÈÒÐøæÐàáÚØ (½ÕÜÐçÚØ àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr "ÈÒÐøæÐàáÚØ (ÄàÐÝæãáÚØ  àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr "ÇÕèÚØ (QWERTY)"
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr "½ÕÜaçÚØ (ÑÕ× ÜàâÒØå âÐáâÕàÐ)"
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr "´ÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr "´ÒÞàÐÚ (US)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr "´ÒÞàÐÚ (½ÞàÒÕèÚØ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr "´ÒÞàÐÚ (ÈÒÕÔáÚØ)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr "µáâÞÝáÚØ"
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr "³àã×ØøáÚØ (\"ÀãáÚØ\" àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr "³àã×ØøáÚØ (\"»ÐâØÝØçÝØ\" àÐßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr "³àçÚØ"
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr "¼ÐòÐàáÚØ"
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr "ÅàÒaâáÚØ"
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr "¨ÕÒàÕøáÚØ"
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr "¨ÕÒàÕøáÚØ (ÄÞÝÕâáÚØ)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Iranian"
-msgstr "¸àÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr "¸áÛÐÝÔáÚØ"
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr "¸âÐÛØøÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr "JÐßÐÝáÚØ 106 âÐáâÕàa"
-
-#: ../../keyboard.pm_.c:254
-msgid "Korean keyboard"
-msgstr "ºÞàÕjÐÝáÚÐ âÐáâÐâãàa"
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr "»ÐâØÝÞ-°ÜÕàØçÚØ"
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr "»ØâÒÐÝáÚØ AZERTY(áâÐàØ)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr "»ØâÒÐÝáÚØ AZERTY(ÝÞÒØ)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "»ØâÒÐÝáÚØ \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "»ØâÒÐÝáÚØ \"äÞÝÕâáÚØ\" QWERTY"
-
-#: ../../keyboard.pm_.c:261
-msgid "Latvian"
-msgstr "»ÕâÞÝáÚØ"
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr "¼ÐÚÕÔÞÝáÚØ"
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr "´ÐÝáÚØ"
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr "¿ÞùáÚØ (qwerty àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr "¿ÞùáÚØ (qwertz àÐáßÞàÕÔ)"
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr "¿ÞàâãÓÐÛáÚØ"
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr "ºÐÝÐÔáÚØ (ºÒÕÑÕÚ)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Romanian (qwertz)"
-msgstr "ÀãÜãÝáÚØ (qwertz)"
-
-#: ../../keyboard.pm_.c:271
-msgid "Romanian (qwerty)"
-msgstr "ÀãÜãÝáÚØ (qwerty)"
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr "ÀãáÚØ (ÏÒÕàâê)"
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr "ÁÛÞÒÕÝÐçÚØ"
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr "ÁÛÞÒÐçÚØ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr "ÁÛÞÒÐçÚØ (QWERTY)"
-
-#: ../../keyboard.pm_.c:279
-msgid "Serbian (cyrillic)"
-msgstr "ÁàßáÚØ (ûØàØÛØæÐ)"
-
-#: ../../keyboard.pm_.c:281
-msgid "Tamil"
-msgstr "ÂÐÜØÛáÚØ"
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr " Thai âÐáâÐâãàÐ"
-
-#: ../../keyboard.pm_.c:284
-msgid "Tajik keyboard"
-msgstr "ÂÐÿØÚØáâÐÝáÚÐ âÐáâÐâãàÐ"
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ÂãàáÚØ (âàÐÔØæØÞÝÐÛÝØ \"F\" ÜÞÔÕÛ)"
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ÂãàáÚØ (ÜÞÔÕàÝØ \"Q\" ÜÞÔÕÛ)"
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr "ÃÚàÐøØÝáÚØ"
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr "US âÐáâÐâãàÐ (ØÝâÕàÝÐæØÞÝÐÛÝÐ)"
-
-#: ../../keyboard.pm_.c:292
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "²ØjÕâÝÐÜáÚØ  \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr "ÁàßáÚØ (ÛÐâØÝØæÐ)"
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:308
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "´ÞÑÐÒØ Windows äÞÝâÞÒÕ"
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ºàãÖÝÞ ÜÞÝâØàaúÕ  %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "ÃÚÛÞÝØ ßàÒÞ ÛÞÓØçÚÕ ÒÞÛãÜÕÝe\n"
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA ßÞÔàèÚÐ ÝÕ ßÞáâÞøØ ÒØèÕ ×Ð 2.2 ÚÕàÝÕÛÕ. ºÞàØáâØâÕ 2.4 ÚÕàÝÕÛ."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun ¼Øè"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "³ÕÝÕàØçÚØ PS2 ÜØè áÐ âÞçÚØûÕÜ"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 âÐáâÕà"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "³ÕÝÕàØçÚØ 2 âÐáâÕàÐ ÜØè"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "ÂÞçÚØû"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "áÕàØøáÚØ"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "³ÕÝÕàØçÚØ 3 âÐáâÕàÐ ÜØè"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC áÕàØøÐ (áÕàØøáÚØ)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM áÕàØøÐ"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (áÕàØøáÚØ, áâÐàØ C7 âØß)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus ÜØè"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 âÐáâÕàa"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 âÐáâÕàa"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ÝØøÕÔÐÝ"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "½ÕÜÐ ÜØèa"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "¼ÞÛØÜ ²Ðá ÔÐ âÕáâØàÐâÕ ÜØèÐ"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "´a ÑØ ÜÞÓÛØ ÔÐ ÐÚâØÒØàÐâÕ ÜØèÐ"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ßÞÜÕàØâÕ âÞçÚØû !"
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr "ºàÐj"
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr "ÁÛÕÔeûØ  ->"
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr "<- ¿àÕâåÞÔÝØ"
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr "´Ð ÛØ øÕ ÞÒÞ ØáßàÐÒÝÞ ?"
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr "¸ÝäÞ"
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr "¿àÞèØàØ áâÐÑÛÞ"
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr "ÁÚãßØ áâÐÑÛÞ"
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr "±ØàÐjâÕ: àÐÒÝÞ ØÛØ ÓàãßÝÞ áÞàâØàÐÝÞ"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "ºÞÝÕÚâãj ÝÐ ØÝâÕàÝÕâ"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"½ÐjçeèûØ ÝaçØÝ ×Ð ÚÞÝÕÚæØjã áa adsl je pppoe.\n"
-"¼eòãâØÜ, ßÞáâÞjÕ ÚÞÝÕÚæØjÕ ÚÞjÕ ÚÞàØáâÕ pptp Ø ÝÕÚÕ ÚÞjÕ ÚÞàØáâe dhcp.\n"
-"ÃÚÞÛØÚÞ ÝÕ ×ÝÐâe ÚÞjÐ je, Ø×ÐÑÕàØâe 'ÚÞàØáâØ pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ÚÞàØáâØ dhcpd"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "ÚÞàØáâØ pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "ÚÞàØáâØ pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "ºÞÓ dhcp ÚÛØjÕÝâÐ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâe ?¿ÞáâÐÒùÕÝØ jÕ dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"½ØjÕ ÔÕâÕÚâÞÒÐÝÐ ÝØjÕÔÝÐ ÜàeÖÝÐ ÚÐàâØæa.\n"
-"½Õ ÜÞÓã ÔÐ ßÞÔÕáØÜ ÞÒÐj âØß ÚÞÝÕÚæØje."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-msgid "Choose the network interface"
-msgstr "¸×ÐÑÕàØâÕ ÜàeÖÝØ ØÝâÕàäejá"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"¸×ÐÑÕàØâÕ ÜàeÖÝØ ÐÔÐßâÕà ÚÞjØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ×Ð ÚÞÝÕÚæØjã ÝÐ ØÝâÕàÝÕâ"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "½ØøÕ ßàÞÝÐòÕÝÐ ÜàÕÖÝÐ ÚÐàâØæÐ"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖÕ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"¼ÞÛØÜ ãÝÕáØâÕ  ØÜÕ åÞáâÐ ãÚÞØÚÞ ÓÐ ×ÝÐâe\n"
-"'½ÕÚØ DHCP áÕàÒÕàØ ×ÐåâÕÒÐjã ØÜÕ åÞáâÐ ÔÐ ÑØ àÐÔØÛØ.\n"
-"²aèÕ ØÜÕ åÞáâÐ âàÕÑÐ ÔÐ ÑãÔÕ ßãÝÞ ØÜÕ ÚÐÞ Ýßà.\n"
-"``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr "¸ÜÕ åÞáâÐ:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-msgid "Network Configuration Wizard"
-msgstr "çÐàÞÑúÐÚ ×Ð ßÞÔÕèÐÒÐúÕ ÜàÕÖe"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "µÚáâÕàÝØ ISDN ÜÞÔÕÜ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "¸ÝâÕàÝÐ  ISDN ÚÐàâØæa"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ºÐÚÒÐ jÕ ÒàáâÐ ÒaèÕ ISDN ÚÕÝÕÚæØjÕ ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"ºÞøã ISDN ÚÞÝäØÓãàÐæØøã ÒØèÕ ßàÕäÕàØàÐâÕ?\n"
-"\n"
-"* ÁâÐàÐ ÚÞäØÓãàÐæøÐ ÚÞàØáâØ isdn4net. ¾ÝÐ áÐÔàÖØ ÜÞòÝÕ ÐÛÐâÚÕ, ÐÛØ øÕ\n"
-"  ßàÞÑÛÕÜÐâØçÝÐ ×Ð ßÞÔÕèÐÒÐúÕ ßÞÓÞâÞÒÞ ×Ð ßÞçÕâÝØÚÕ, Ø ÝØøÕ ãÞÑØçÐøÕÝÐ.\n"
-"\n"
-"* ½ÞÒÐ ÚÞÝäØÓãàÐæØøÐ øÕ øÕÔÝÞáâÐÒÝØøÐ ×Ð àÐ×ãÜÕâØ, áâÐÝÔÐàÔÝØøÐ,\n"
-"  ÐÛØ áÐ ÜÐúÕ ÞßæØøÐ Ø ÐÛÐâÐ.\n"
-"\n"
-"¼Ø ßàÕßÞàãçãøÕÜÞ ÛÐÚèã (øÕÔÝÞáâÐÒÝØøã) ÚÞÝäØÓãàÐæØøã.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "½ÞÒÐ ÚÞÝäØÓãàÐæØøÐ (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ÁâÐàÐ ÚÞÝäØÓãàÐæØøÐ (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN ºÞÝäØÓãàÐæØøa"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"¸×ÐÑÕàØâÕ áÒÞÓ ßàÞÒÐjÔeàa.\n"
-" ÃÚÞÛØÚÞ ÝØjÕ ÝÐ ÛØáâØ, Ø×ÐÑÕàØâÕ Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "µÒàÞßáÚØ ßàÞâÞÚÞÛ"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "µÒàÞßáÚØ ßàÞâÞÚÞÛ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "¿àÞâÞÚÞÛ ×Ð áâÐâÐÚ áÒÕâa"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"¿àÞâÞÚÞÛ ×Ð ¾áâÐâÐÚ áÒÕâÐ \n"
-" ÑÕ× ´-ÚÐÝÐÛÐ (×ÐÚãßùÕÝÕ ÛØÝØjÕ)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use?"
-msgstr "ºÞøØ ßàÞâÞÚÞÛ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâe ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "ºaÚÒã Òàáâã ÚÐàâØæÕ ØÜÐâÕ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "½Õ ×ÝÐÜ"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"ÃÚÞÛØÚÞ ØÜaâÕ ISA ÚÐàâØæã, ÒàÕÔÝÞáâØ ÝÐ áÛÕÔeûÕÜ ÕÚàÐÝã ÑØ âàÕÑÐÛÕ ÑØâØ "
-"ØáßàÐÒÝe.\n"
-"\n"
-"ÃÚÞÛØÚÞ ØÜaâe PCMCIA ÚÐàâØæã, ÜÞàÐâÕ ×ÝÐâØ  irq Ø  io ×Ð Òaèã ÚÐàâØæã.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "¿àÕÚØÝØ"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "½ÐáâÐÒØ"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card?"
-msgstr "ºÞøÐ øÕ ÒÐèÐ ISDN ÚÐàâØæa ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"´ÕâÕÚâÞÒÐÝÐ je ISDN PCI ÚÐàâØæa, ÝÕßÞ×ÝÐâÞÓ âØßa. ¸×ÐÑÕàØâe jÕÔÝã PCI "
-"ÚÐàâØæã ÝÐ áÛÕÔeûÕÜ ÕÚàÐÝã."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "½ØjÕ ßàÞÝaòÕÝÐ ISDN PCI ÚÐàâØæÐ.¸×ÐÑÕàØâÕ jÕÔÝã ÝÐ áÛÕÔeûÕÜ ÕÚàÐÝã."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "¸×ÐÑÕàØâÕ áÕàØøáÚØ ßÞàâ  ÝÐ ÚÞøØ øÕ ÜÞÔÕÜ ßÞÒÕ×ÐÝ."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Dialup ÞßæØøÕ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "¸ÜÕ ÚÞÝÕÚæØøÕ"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "±àÞø âÕÛÕäÞÝÐ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID ×Ð ÛÞÓÞÒÐúÕ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "±Ð×ØàÐÝÞ ÝÐ áÚàØßâØ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "±Ð×ØàÐÝÞ ÝÐ âÕàÜØÝÐÛã"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "¸ÜÕ ÔÞÜÕÝÐ"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "¿àÒØ DNS ÁÕàÒÕà (ÞßæØja)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "´àãÓØ DNS ÁÕàÒÕà (ÞßæØja)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"¼ÞÖÕâÕ áÕ ÔØáÚÞÝÕÚâÞÒÐâØ ØÛØ àÕÚÞÝäØÓãàØáÐâØ ÚÞÝÕÚæØjã."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"¿ÞÔÕáØ ØÝâÕàÝÕâ ÚÞÝäØÓãàÐæØjã"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "ÂàÕÝãâÝÞ áâÕ ÚÞÝÕÚâÞÒÐÝØ ÝÐ ¸ÝâÕàÝÕâ"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"ÁÐÔÐ áÕ ÜÞÖÕâÕ ÚÞÝÕÚâÞÒÐâØ ÝÐ ¸ÝâÕàÝÕâ ØÛØ àÕÚÞÝäØÓãàØáÐâØ ÚÞÝÕÚæØjã"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "ÂàÕÝãâÝÞ ÝØáâÕ ÚÞÝÕÚâÞÒÐÝØ ÝÐ ¸ÝâÕàÝÕâ"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "ºÞÝÕÚâãj"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "´ØáÚÞÝÕÚâãj"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "¿ÞÔÕáØ ÚÞÝÕÚæØjã"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÐ Ø  ÚÞÝäØÓãàÐæØja"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "ÁÐÔÐ âàÕÑÐ ÔÐ ßÞÔÕáØÜÞ %s ÚÞÝÕÚæØjã."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"ÁÐÔÐ âàÕÑÐ ÔÐ ßÞÔÕáØÜÞ %s ÚÞÝÕÚæØøã.\n"
-"\n"
-"\n"
-"¿àØâØáÝØâÕ \"à àÕÔã\" ×Ð ÝÐáâÐÒÐÚ."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖe"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"·ÑÞÓ âÞÓÐ èâÞ àÐÔØâÕ ÜàÕÖÝã ØÝáâÐÛÐæØjã, ÒaèÐ ÜàÕÖÐ jÕ Òeû ßÞÔeèÕÝa "
-"ßÞÔeèÕÝa.\n"
-"ºÛØÚÝØâÕ ÝÐ  Oº  ×ÐÔàÔÖÐÛØ ÚÞÝäØÓãàÐæØjã Network/Internet ÚÞÝÕÚæØje, ØÛØ "
-"cancel Ôa ÑØ ßÞÝÞÒÞ ãàÐÔØÛØ ÚÞäØÓãàÐæØjã.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"´ÞÑàÞÔÞèÛØ ã ßàÞÓàÐÜ ×Ð ¿ÞÔeèÐÒaúÕ ¼àeÖÝÕ ÚÞÝÕÚæØje\n"
-"\n"
-"ÁaÔÐ âàÕÑÐ ÔÐ ÚÞÝäØÓãàØèÕÜÞ Òaèã ØÝâÕàÝÕâ/ÜàeÖÝã ÚÞÝÕÚæØjã.\n"
-"ÃÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÐãâÞ ÔÕâÕÚæØjã, ÔÕáÕÛÕÚâãjâÕ ÞßæØjã.\n"
-
-#: ../../network/netconnect.pm_.c:171
-msgid "Choose the profile to configure"
-msgstr "¸×ÐÑÕàØâÕ ßàÞäØÛ ×Ð ÚÞÝäØÓãàØáaúe"
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr "ºÞàØáâØ ÐãâÞ ÔÕâÕÚæØjã"
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr "´ÕâÕÚâãjÕÜ  ãàeòÐje..."
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "Normal modem connection"
-msgstr "½ÞàÜÐÛÝa ÜÞÔÕÜáÚa ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, c-format
-msgid "detected on port %s"
-msgstr "´ÕâÕÚâÞÒÐÝÞ ÝÐ ßÞàâã %s"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-msgid "ISDN connection"
-msgstr "ISDN ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr "ÔÕâÕÚâÞÒÐÝÞ %s"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-msgid "ADSL connection"
-msgstr "ADSL ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr "´ÕâÕÚâÞÒÐÝÞ ÝÐ ØÝâÕàäejáã %s"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "Cable connection"
-msgstr "ºÐÑÛÞÒáÚÐ ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "cable connection detected"
-msgstr "´ÕâÕÚâÞÒÐÝÐ øÕ ÚÐÑÛÞÒáÚÐ ÚÞÝÕÚæØja "
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "LAN connection"
-msgstr "LAN ÚÞÝÕÚæØja"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr "ÔÕâÕÚâÞÒÐÝÐ ÜàeÖÝÐ ÚÐàâØæÐ(Õ)"
-
-#: ../../network/netconnect.pm_.c:206
-msgid "Choose the connection you want to configure"
-msgstr "¸×ÐÑÕàØâÕ âØß ÚÞÝÕÚæØøÕ ÚÞøØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ"
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"²Ø áâÕ ßÞÔÕáØÛØ ÒØèÕ ÝÐçØÝÐ ×Ð ÚÞÝÕÚâÞÒÐúÕ ÝÐ ¸ÝâÕàÝÕâ.\n"
-"¸×ÐÑÕàØâÕ øÕÔÐÝ ÞÔ úØå ÚÞøØ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:231
-msgid "Internet connection"
-msgstr "¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÐ"
-
-#: ../../network/netconnect.pm_.c:237
-msgid "Do you want to start the connection at boot?"
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ áâÐàâãjÕâe ÚÞÝÕÚâÞÒaúÕ ßàØ áâÐàâaúã áØáâÕÜa ?"
-
-#: ../../network/netconnect.pm_.c:251
-msgid "Network configuration"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖe"
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr "¼àÕÖÐ ÜÞàÐ ÑØâØ àÕáâÐàâÞÒÐÝÐ"
-
-#: ../../network/netconnect.pm_.c:256
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"¿ÞjÐÒØÞ áÕ ßàÞÑÛÕÜ âÞÚÞÜ àÕáâÐàâÞÒaúÐ ÜàeÖe?\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"çÕáâØâÐÜÞ, ÜàeÖÝÐ Ø ØÝâÕàÝÕâ ÚÞÝäØÓãàÐæØjÐ jÕ ×aÒàèÕÝa.\n"
-"\n"
-"ºÞÝäØÓãàÐæØjÐ áÕ áÐÔÐ ÜÞÖÕ ßàØÜÕÝØâØ ÝÐ áØáâÕÜ.\n"
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"ºÐÔÐ áÕ âÞ ãàÐÔØ, âàÕÑÐÛØ ÑØ ÔÐ àÕáâÐàâãjÕâe X\n"
-"ÞÚàãÖeúe ÔÐ ÑØ Ø×ÑÕÓÛØ ßàÞÑÛÕÜÕ áÐ ßàÞÜÕÝÞÜ hostname-a."
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"¿ÞøÐÒØÛØ áã áÕ ßàÞÑÛÕÜØ âÞÚÞÜ ÚÞÝäØÓãàÐæØøÕ.\n"
-"¿àÞÒÕàØâÕ áÒÞøã ÚÞÝÕÚæØøã ßàÕÚÞ net_monitor ØÛØ mcc. ÃÚÞÛØÚÞ ÒÐèÐ ÚÞÝÕÚæØøÐ "
-"ÝÕ àÐÔØ, âàÕÑÐ ÔÐ ßÞÝÞÒØâÕ ÚÞÝäØÓãàÐæØøã"
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ÃßÞ×Þàeúe: ¾ÒÐj ãàÕòÐø jÕ Òeû ßàÕâåÞÔÝÞ ÚÞÝäØÓãàØáÐÝ ×Ð ÚÞÝÕÚâÞÒaúe Ýa "
-"¸ÝâÕàÝÕâ.\n"
-"ÁÐÜÞ ßàØåÒÐØâØâe ÔÐ ÑØ ßÞáâÐÒÚã ÞáâÐÒØÛØ ØáâÞÜ.\n"
-"¸×ÜÕÝÐ ßÞùÐ ÚÞjÕ ÒØÔØâÕ ûÕ ßÞÝØèâØâØ ßÞáâÞjeûã ÚÞÝäØÓãàÐæØjã."
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"¼ÞÛØÜ ãÝÕáØâÕ IP ÚÞÝäØÓãàÐæØøã ×Ð ÞÒã ÜÐèØÝã.\n"
-"ÁÒÐÚÐ áâÐÒÚÐ âàÕÑÐ ÔÕ ÑãÔÕ tavka âàÕÑÐ ÔÐ ÑãÔÕ ãÝÕâÐ ÚÐÞ\n"
-"IP ÐÔàÕáÐ (ÝÐ ßàØÜÕà, 123.45.67.89)."
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖÝÞÓ ãàÕòÐøÐ %s"
-
-#: ../../network/network.pm_.c:309
-#, c-format
-msgid " (driver %s)"
-msgstr "(ÔàÐjÒÕà %s)"
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ÐÔàÕáÐ"
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "¼àÕÖÝÐ ÜÐáÚÐ"
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr "°ãâÞÜÐâáÚØ IP"
-
-#: ../../network/network.pm_.c:314
-#, fuzzy
-msgid "Start at boot"
-msgstr "¿ÞÚàÕÝãâÞ ßàØ áâÐàâaúã"
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÐÔàÕáÐ âàÕÑÐ ÔÐ ÑãÔÕ ã äÞàÜÐâã 1.2.3.4"
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"¼ÞÛØÜ ãÝÕáØâÕ ØÜÕ ÒÐèÕÓ ÔÞÜÕÝÐ, ØÜÕ åÞáâÐ, ÚÐÞ IP ÐÔàÕáÕ ÔÞÔÐâÝØå\n"
-"'nameserver'-Ð. ¸ÜÕ ÒÐèÕÓ åÞáâÐ âàÕÑÐ ÔÐ ÑãÔÕ ßãÝÞ ÚÒÐÛØäØÚÞÒÐÝÞ ØÜÕ åÞáâÐ,\n"
-"ÚÐÞ ÝÐ ßà.  ``mybox.mylab.myco.com''.\n"
-"°ÚÞ ÝÕÜÐâÕ ÔÞÔÐâÝØå 'nameserver'-Ð, ÞáâÐÒØâÕ âÐ ßÞùÐ ßàÐ×ÝÐ."
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr "DNS áÕàÒÕà"
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (e.g. %s)"
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr "Gateway ãàÕòÐj"
-
-#: ../../network/network.pm_.c:385
-msgid "Proxies configuration"
-msgstr "¿ÞÔeèÐÒaúÕ ßàÞÚáØja"
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr "Track ÜàÕÖÝÐ ÚÐàâØæÐ id (ÚÞàØáÝÞ ×Ð ÛÐßâÞß àÐçãÝÐàÕ)"
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr "Proxy âàÕÑÐ ÔÐ ÑãÔÕ http://..."
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr "Proxy âàÕÑÐ ÔÐ ÑãÔÕ ftp://..."
-
-#: ../../network/tools.pm_.c:41
-msgid "Internet configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ØÝâÕàÝÕâa"
-
-#: ../../network/tools.pm_.c:42
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ áÕ ÚÞÝÕÚâãjÕâÕ ÝÐ ØÝâÕàÝÕâ áÐÔa?"
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "ÂÕáâØàaúÕ ÚÞÝÕÚæØjÕ..."
-
-#: ../../network/tools.pm_.c:56
-msgid "The system is now connected to Internet."
-msgstr "ÁØáâÕÜ jÕ âàÕÝãâÝÞ ÚÞÝÕÚâÞÒÐÝ ÝÐ ¸ÝâÕàÝÕâ"
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr "¸× áØÓãàÝÞáÝØå àÐ×ÛÞÓÐ, ÞÝ ûÕ áÐÔÐ ÑØâØ ÔØáÚÞÝÕÚâÞÒÐÝ."
-
-#: ../../network/tools.pm_.c:58
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"¸×ÓÛÕÔÐ ÔÐ áØáâÕÜ ÝØjÕ ÚÞÝÕÚâÞÒÐÝ ÝÐ ¸ÝâÕàÝÕâ.\n"
-"¿àÞÑÐjâÕ ÔÐ ßàÞÜÕÝØâÕ ÚÞÝäØÓãàÐæØjã."
-
-#: ../../network/tools.pm_.c:82
-msgid "Connection Configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje"
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr "¼ÞÛØÜ ²°Á ÔÐ ßÞßãÝØâÕ ØÛØ Þ×ÝaçØâÕ ßÞùÐ ØáßÞÔ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "(DMA) ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr " IO ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr " IO_0 ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 ÚÐàâØæe"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "²aè ÛØçÝØ ÑàÞj âÕÛÕäÞÝa"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "¸ÜÕ ßàÞÒÐjÔÕàÐ (Ýßà. provider.net)"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "±àÞø âÕÛÕäÞÝÐ ßàÞÒÐjÔÕàa"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "¿àÞÒÐjÔÕàÞÒ dns 1 (ÞßæØÞÝÞ)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "¿àÞÒÐjÔÕàÞÒ dns 2 (ÞßæØÞÝÞ)"
-
-#: ../../network/tools.pm_.c:95
-msgid "Choose your country"
-msgstr "¸×ÐÑÕàØ áÒÞøã ×ÕÜùã"
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "¼ÞÔ ×Ð ÑØàaúe"
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "±à×ØÝÐ ÚÞÝÕÚæØøÕ "
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "²àÕÜÕ ßÐã×Õ ÚÞÝÕÚæØøÕ (ã áÕÚ.)"
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "»ÞÓÞÒaúÕ ×Ð àaçãÝ (ÚÞàØáÝØçÚÞ ØÜÕ)"
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "»Þ×ØÝÚÐ ×Ð àaçãÝ"
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ÜÞÝâØàÐúÕ ÝØøÕ ãáßÕÛÞ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended ßÐàâØæØjÐ ÝØjÕ ßÞÔàÖÐÝÐ ÝÐ ÞÒÞj ßÛÐâäÞàÜØ"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"¸ÜÐâÕ ßàÐ×ÝØÝã ã ÒÐèÞø âÐÑÕÛØ ßÐàâØæØøÐ ÐÛØ øÕ ÝÕ ÜÞÓã ÚÞàØáØâØ.\n"
-"¨ÕÔØÝÞ àÕèÕúÕ øÕ ÔÐ ßÞÜÕàØâÕ ßàØÜÐàÝã ßÐàâØæØøã âÐÚÞ ÔÐ ßàÐ×ÝØÝÐ ÑãÔÕ\n"
-"ÔÞ extended ßÐàâØæØøÐ"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "¾âÒÐàÐúÕ Ø× ÔÐâÞâÕÚe %s ÝØøÕ ãáßÕÛÞ: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "»ÞèÕ backup-ÞÒÐÝa ÔÐâÞâÕÚa"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "³àÕèÚÐ ÚÞÔ ãÝÞáÐ ã ÔÐâÞâÕÚa %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"½eèâÞ ÛÞèÕ áÕ ÔeèÐÒÐ áÐ ÒaèØÜ åÐàÔ ÔØáÚÞÜ. \n"
-"ÂÕáâ ØÝâÕÓàØâÕâÐ ßÞÔÐâÐÚÐ ÝØjÕ ßàÞèÐÞ. \n"
-"ÂÞ ×ÝaçØ ÔÐ áÒÕ èâÞ áÕ ÝÐÛÐ×Ø ÝÐ ÔØáÚã ûÕ ×ÐÒàèØâØ ÚÐÞ òãÑàe"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ÜÞàÐ ØÜÐâØ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "ÒaÖÝÞ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ÒÕÞÜÐ ÛÕßÞ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ÛÕßÞ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ÜÞÖÔa"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ¾ßèâØ Unix-ÞÒ áØáâÕÜ ×Ð èâÐÜßÐúÕ"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR ½ÞÒÕ ³ÕÝÕàÐæØøÕ"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer ´ÕÜÞÝ"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - ÈâÐÜßÐø, ÝÕÜÞø ÔÐ ßÐÜâØè"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "»ÞÚÐÛÝØ  èâÐÜßÐç"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "ÃÔÐùÕÝØ èâÐÜßaç"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "ÈâÐÜßÐç ØÛØ ÃÔÐùÕÝØ CUPS áÕàÒÕà"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-msgid "Printer on remote lpd server"
-msgstr "ÈâÐÜßÐç ØÛØ ÃÔÐùÕÝØ lpd áÕàÒÕà"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "¼àeÖÝØ èâÐÜßÐç (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "ÈâÐÜßÐç ÝÐ SMB/Windows 95/98/NT áÕàÒÕàã"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "ÈâÐÜßÐç ÝÐ NetWare áÕàÒÕàã"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-msgid "Enter a printer device URI"
-msgstr "ÃÝÕáØâÕ URI ×Ð èâÐÜßÐç"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "ÃÑÐæØ ÝÐàÕÔÑã ã ÚÞÜÐÝÔã"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr "½ÕßÞ×ÝÐâØ ÜÞÔÕÛ"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "»ÞÚÐÛÝØ èâÐÜßÐçØ"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "ÃÔÐùÕÝØ èâÐÜßaçØ"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " ÝÐ ßÐàÕÛÕÛÝÞÜ ßÞàâã \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB èâÐÜßÐç \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", ÜãÛâØ-äãÝÚæØÞÝÐÛÝØ ãàÕòÐø ÝÐ ßÐàÐÛÕÛÝÞÜ ßÞàâã \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", ÜãÛâØ-äãÝÚæØÞÝÐÛÝØ ãàÕòÐø ÝÐ USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", ÜãÛâØ-äããÝÚæØÞÝÐÛÝØ ãàÕòÐø ÝÐ HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", ÜãÛâØ-äãÝÚæØÞÝÐÛÝØ ãàÕòÐø"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", èâÐÜßÐø ÝÐ %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "ÝÐ LPD áÕàÒÕàr \"%s\", èâÐÜßÐç \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP åÞáâ \"%s\", ßÞàâ %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "ÝÐ Windows áÕàÒÕà \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "ÝÐ Novell áÕàÒÕà \"%s\", èâÐÜßÐç \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", ÚÞàØáâØÜ ÚÞÜÐÝÔã %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr "Raw èâÐÜßÐç (ÑÕ× ÔàÐøÒÕàÐ)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(ÝÐ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ÝÐ ÞÒÞø ÜÐèØÝØ)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "½Ð CUPS áÕàÒÕà \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr " (¿ÞÔàÐ×ãÜÕÒÐÝÞ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "¸×ÑÞà ßÞÒÕ×ÐÝÞáâØ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ºÐÚÞ øÕ èâÐÜßÐç ßÞÒÕ×ÐÝ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"ÈâÐÜßÐçÕ ÝÐ ãÔÐùÕÝÞÜ CUPS áÕàÒÕàã ÝÕÜÐâÕ ÔÐ ÑØ Øå ÞÒÔÕ ßÞÔÕáØÛØ; ÞÒØ "
-"èâÐÜßÐçØ ûÕ ÑØâØ ÐãâÞÜÐâáÚØ ÔÕâÕÚâÞÒÐÝØ."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-msgid "CUPS configuration"
-msgstr "CUPS ÚÞÝäØÓãàÐæØøÐ"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-msgid "Specify CUPS server"
-msgstr "¾ÔàÕÔØâÕ CUPS áÕàÒÕà"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"´Ð ÑØ ÔÞÑØÛØ ßàØáâãß èâÐÜßÐçØÜÐ ÝÐ ãÔÐùÕÝØÜ CUPS áÕàÒÕàØÜÐ ÝÐ ÒÐèÞø ÛÞÚÐÛÝÞø "
-"ÜàÕÖØÝÕ ÜÞàÐâÕ ÝØèâÐ ÔÐ ßÞÔÕèÐÒÐâÕ; CUPS áÕàÒÕàØ ÐãâÞÜÐâáÚØ ÞÑÐÒÕèâÐÒÐøã "
-"ÒÐèã ÜÐèØÝãÞ áÒÞøØÜ èâÐÜßÐçØÜÐ. ÁÒØ èâÐÜßÐçØ ÚÞøØ áã âàÕÝãâÝÞ ßÞ×ÝÐâØ ÒÐèÞø "
-"ÜÐèØÝØ áã ßàØÚÐ×ÐÝØ ã \"Remote printers\" ÔÕÛã  ÓÛÐÒÝÞÓ ßàÞ×ÞàÐ Printerdrake-"
-"Ð. ºÐÔÐ ÒÐè CUPS áÕàÒÕà ÝØøÕ ÝÐ ÛÞÚÐÛÝÞø ÜÐèØÝØ, ÜÞàÐâÕ ãÝÕâØ CUPS áÕàÒÕàÞÒã "
-"IP ÐÔàÕáã Ð ÞßæØÞÝÞ ÑàÞø ßÞàâÐ ÔÐ ÑØ ÔÞÑØÛØ ØÝäÞàÜÐæØøÕ Þ èâÐÜßÐçã ÞÔ "
-"áÕàÒÕàÐ, ØÛØ ÞÒÕ ÛØÝØøÕ ×Ð ãÝÞá ÞáâÐÒØâÕ ßàÐ×ÝØÜÐ."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"¾ÑØçÝÞ CUPS øÕ ÐãâÞÜÐâáÚØ ßÞÔÕèÕÝ ÝÐ ÞáÝÞÒã ÜàÕÖÝÞÓ ÞÚàãÖÕúÐ, âÐÚÞ ÔÐ ÜÞÖÕâÕ "
-"ßàØáâãßØâØ èâÐÜßÐçØÜÐ ÝÐ CUPS áÕàÒÕàØÜÐ ÝÐ ÒÐèÞø ÛÞÚÐÛÝÞø ÜàÕÖØ. ÃÚÞÛØÚÞ ÞÒÞ "
-"ÝÕ äãÝÚæØÞÝØèÕ ÚÐÚÞ âàÕÑÐ, ØáÚùãçØâÕ \"°ãâÞÜÐâáÚã CUPS ÚÞÝäØÓãàÐæØøã\" ã "
-"Ø×ÜÕÝØâÕ ÒÐè äÐøÛ /etc/cups/cupsd.conf àãçÝÞ. ½Õ ×ÐÑÞàÐÒØâÕ ÔÐ ÝÐÚÞÝ âÞÓÐ "
-"àÕáâÐàâãøÕâÕ CUPS (ÚÞÜÐÝÔÐ: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ÐÔàÕáÐ âàÕÑÐ ÔÐ Ø×ÓÛÕÔÐ ÚÐÞ Ýßà. 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr "±àÞj ßÞàâÐ ÑØ âàÕÑÐÞ ÔÐ ÑãÔÕ ÑàÞj !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "SMB áÕàÒÕà IP:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-msgid "Port"
-msgstr "¿Þàâ"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "°ãâÞÜÐâáÚÐ CUPS ÚÞÝäØÓãàÐæØøÐ"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "ÂÕáâØàÐúÕ ßÞàâÞÒÐ"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-msgid "Add a new printer"
-msgstr "´ÞÔÐøâÕ ÝÞÒØ èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"´ÞÑàÞÔÞèÛØ ã ÇÐàÞÑúÐÚ ×Ð ÚÞÝäØÓãàØáÐúÕ èâÐÜßÐçÐ\n"
-"\n"
-"¾ÒÐø çÐàÞÑúÐÚ ûÕ ÒÐÜ ÞÜÞÓãûØâØ ÔÐ ØÝáâÐÛØàÐâÕ ÛÞÚÐÛÝÕ ØÛØ ãÔÐùÕÝÕ èâÐÜßÐçÕ "
-"áÐ ÞÒÕÜÐèØÝÕ ÚÐÞ Ø ÔàãÓØå ÜÐèØÝÐ ÝÐ ÜàÕÖØ.\n"
-"\n"
-"¾Ô ÒÐá ûÕ ÑØâØ âàÐÖÕÝÕ áÒÕ ÝÕÞßåÞÔÝÕ ØÝäÞàÜÐæØøÕ ×Ð ßÞÔÕèÐÒÐúÕ èâÐÜßÐçÐ Ð "
-"ÔÞÑØûÕâÕ ßàØáâãß áÒØÜ ÔÞáâyßÝØÜ ÔàÐøÒÕàØÜÐ, úØåÞÒØÜ ÞßæØøÐÜÐ, Ø âØßÞÒØÜÐ "
-"ÚÞÝÕÚæØøÕ èâÐÜßÐçÐ."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "»ÞÚÐÛÝØ èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"´ÞÑÞàÞÔÞèÛØ ã ÇÐàÞÑúÐÚ ×Ð ÚÞÝäØÓãàØáÐúÕ èâÐÜßÐçÐ\n"
-"\n"
-"¾ÒÐø çÐàÞÑúÐÚ ûÕ ÒÐÜ ßÞÜÞûØ ÔÐ ØÝáâÐÛØàÐâÕ ÒÐè èâÐÜßÐç(Õ) ßÞÒÕ×ÐÝ(Õ) ÝÐ ÞÒÐø "
-"àÐçãÝÐà.\n"
-"\n"
-"¿àØÚùãçØâÕ ÒÐè èâÐÜßÐç(Õ) ã àÐçãÝÐà Ø ãÚùãçØâÕ ÓÐ(Øå). ºÛØÚÝØâÕ ÝÐ on "
-"\"ÁÛÕÔÕûÕ\" ÚÐÔÐ ÑãÔÕâÕ áßàÕÜÝØ, Ð \"¿ÞÝØèâØ\" ÚÐÔÐ ÝÕ ÖÕÛØâÕ ÔÐ ßÞÔÕèÐÒÐâÕ "
-"èâÐÜßÐç(Õ).\n"
-"\n"
-"·ÐßÐÜâØâÕ ÔÐ ÝÕÚØ àÐçãÝÐàØ ÜÞÓã ÔÐ áÕ ÑÛÞÚØàÐøã âÞÚÞÜ ÐãâÞ-ÔÕâÕÚæØøÕ, "
-"ØáÚùãçØâÕ  \"°ãâÞ-ÔÕâÕÚæØøã èâÐÜßÐçÐ\" ÔÐ ÑØ àãçÝÞ ØÝáâÐÛØàÐÛØ èâÐÜßÐç. "
-"ºÞàØáâØâÕ \"µÚáßÕàâ ÜÞÔ\" ã printerdrake ÚÐÔÐ ÖÕÛØâÕ  ÔÐ ßÞÔÕáØâÕèâÐÜßÐúÕ ÝÐ "
-"ãÔÐùÕÝÞÜ èâÐÜßÐçã ÚÞøØ ÝØøÕ ÐãâÞÜÐâáÚØ ßàØÚÐ×ÐÝ."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "°ãâÞ-ÔÕâÕÚæØøÐ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"ÇÕáâØâÐÜÞ, ÑÐè èâÐÜßÐç øÕ áÐÔÐ ØÝáâÐÛØàÐÝ Ø ßÞÔÕèÕÝ!\n"
-"\n"
-"¼ÞÖÕâÕ ÔÐ èâÐÜßÐâÕ ÚÞàØáâÕûØ \"ÈâÐÜßÐø\" ÚÞÜÐÝÔã ã ÒÐèÞø ÐßÛØÚÐæØøØ (ÞÑØçÝÞ "
-"ã \"ÄÐøÛ\" ÜÕÝØøã).\n"
-"\n"
-"ÃÚÞÛØÚÞ ÖÕÛØâÕ ÔÐ ÔÞÔÐâÕ, ãÚÛÞÝØâÕ ØÛØ ßàÞÜÕÝØâÕ ØÜÕ èâÐÜßÐçã, ØÛØ ÖÕÛØâÕ ÔÐ "
-"ßàÞÜÕÝØâÕ default ÞßæØøÕ (ßÐßØà, ÚÒÐÛØâÕâ èâÐÜßÐúÐ, ...), Ø×ÐÑÕàØâÕ \"ÈâÐÜßÐç"
-"\" ã \"ÅÐàÔÒÕà\" áÕÚæØøØ Mandrake ºÞÝâàÞÛÝÞÓ ÆÕÝâàÐ."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "°ãâÞ-ÔÕâÕÚæØøÐ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake øÕ ã ÜÞÓãûÝÞáâØ ÔÐ ÐãâÞ-ÔÕâÕÚâãøÕ ÒÐè ÛÞÚÐÛÝÞ ÒÕ×ÐÝ ßÐàÐÛÕÛÝØ "
-"ØÛØ USB èâÐÜßÐç ãÜÕáâÞ ÒÐá, ÐÛØ ØÜÐøâÕ ÝÐ ãÜã ÔÐ ÐãâÞ-ÔÕâÕÚæØøÐ ¼¾¶µ "
-"±»¾º¸À°Â¸ ²°È Á¸Áµ¼ ° ¾ ¼¾¶µ ²¾´¸Â¸ ¾ÈµûµªÃ Ä°¨» Á¸Áµ¼°! ÀÐÔØâÕ ÞÒÞ ÐÛØ "
-"ÝÐ  Á¾¿Á²µ½¸ À¸·¸º!\n"
-"\n"
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ÐãâÞ-ÔÕâÕÚâãøÕâÕ èâÐÜßÐç?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "ºÞàØáâØ ÐãâÞ ÔÕâÕÚæØjã"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "¸×ÐÑÕàØâÕ ÚÞàØáÝØÚÕ àãçÝÞ"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "´ÕâÕÚâÞÒÐÝ %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "ÈâÐÜßÐç ÝÐ ßÐàÐÛÕÛÝÞÜ ßÞàâã \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB èâÐÜßÐç \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"½ØøÕ ßàÞÝÐòÕÝ ÛÞÚÐÛÝØ èâÐÜßÐç! ´Ð ÑØ àãçÝÞ ØÝáâÐÛØàÐÛØ èâÐÜßÐç ãÝÕáØâÕ ØÜÕ "
-"ãàÕòÐøÐ/ØÜÕ äÐøÛÐ ã ÛØÝØøØ ×Ð ãÝÞá (¿ÐàÐÛÕÛÝØ ßÞàâÞÒØ: /dev/lp0, /dev/"
-"lp1, ..., øÕ ÕÚÒØÒÐÛÕÝâÝÞ LPT1:, LPT2:, ..., ßàÒØ USB èâÐÜßÐç: /dev/usb/lp0, "
-"ÔàãÓØ USB èâÐÜßÐç: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "¼ÞàÐâÕ ãÝÕâØ ãàÕòÐø ØÛØ ØÜÕ äÐøÛÐ!"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "½ØøÕ ßàÞÝÐòÕÝ ÛÞÚÐÛÝØ èâÐÜßÐç!"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"¼àÕÖÝØ èâÐÜßÐçØ ÜÞÓã ÑØâØ ØÝáâÐÛØàÐÝØ ÝÐÚÞÝ ØÝáâÐÛÐæØøÕ áØáâÕÜÐ. ¸×ÐÑÕàØâÕ "
-"\"ÅÐàÔÒÕà\" Ð ÞÝÔÐ \"ÈâÐÜßÐç\" ã Mandrake ºÞÝâàÞÛÝÞÜ ÆÕÝâàã."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"´Ð ÑØ ØÝáâÐÛØàÐÛØ ÜàÕÖÝÕ èâÐÜßÐçÕ, ÚÛØÚÝØâÕ \"¿ÞÝØèâØ\", ßàÕòØâÕ ÝÐ "
-"\"µÚáßÕàâ ÜÞÔ\", Ø ÚÛØÚÝØâÕ \"´ÞÔÐøâÕ ÝÞÒØ èâÐÜßÐç\" ßÞÝÞÒÞ."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"¿àØÚÐ×ÐÝØ èâÐÜßÐç øÕ ÐãâÞ-ÔÕâÕÚâÞÒÐÝ, Ð ãÚÞÛØÚÞ âÞ ÝØøÕ ÞÝÐø ÚÞøØ ÖÕÛØâÕ ÔÐ "
-"ßÞÔÕáØâÕ, ãÝÕáØâÕ ØÜÕ/ØÜÕ äÐøÛÐ ãàÕòÐøÐ ã ÛØÝØøã ×Ð ãÝÞá"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"¾ÒÔÕ áÕ ÝÐÛÐ×Ø ÛØáâÐ áÒØå ÐãâÞ-ÔÕâÕÚâÞÒÐÝØå èâÐÜßÐçÐ. ¸×ÐÑÕàØâÕ èâÐÜßÐç ÚÞøØ "
-"ÖÕÛØâÕ ØÛØ ãÝÕáØâÕ ØÜÕØÜÕ äÐøÛÐ ãàÕòÐøÐ ã ÛØÝØøØ ×Ð ãÝÞá"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"¿àØÚÐ×ÐÝØ èâÐÜßÐç øÕ ÐãâÞ-ÔÕâÕÚâÞÒÐÝ. ¿ÞÔÕèÐÒÐúÕ èâÐÜßÐçÐ ûÕ ÑØâØ ßÞâßãÝÞ "
-"ÐãâÞÜÐâáÚÞ. ÃÚÞÛØÚÞ ÒÐè èâÐÜßÐç ÝØøÕ ØáßàÐÒÝÞ ÔÕâÕÚâÞÒÐÝ ØÛØ ÖÕÛØâÕ ÔÐ áÐÜØ "
-"ßÞÔÕèÐÒÐâÕ èâÐÜßÐç, ãÚùãçØâÕ \"ÀãçÝÐ ÚÞÝäØÓãàÐæØøÐ\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"¾ÒÔÕ áÕ ÝÐÛÐ×Ø ÛØáâÐ áÒØå ÐãâÞ-ÔÕâÕÚâÞÒÐÝØå èâÐÜßÐçÐ. ¸×ÐÑÕàØâÕ èâÐÜßÐç ÚÞøØ "
-"ûÕÛØâÕ ÔÐ ßÞÔÕáØâÕ. ¿ÞÔÕèÐÒÐúÕ èâÐÜßÐçÐ ûÕ ÑØâØ ßÞâßãÝÞ ÐãâÞÜÐâáÚÞ. ÃÚÞÛØÚÞ "
-"ÒÐ èâÐÜßÐç ÝØøÕ ßàÐÒØÛÝÞ ÔÕâÕÚâÞÒÐÝ ØÛØ ÒØèÕ ÖÕÛØâÕ ÔÐ ÓÐ áÐÜØ ßÞÔÕáØâÕ, "
-"ãÚùãçØâÕ \"ÀãçÝÐ ÚÞÝäØÓãàÐæØøÐ\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"¸×ÐÑÕàØâÕ ßÞàâ ÝÐ ÚÞøØ øÕ ÒÐè èâÐÜßÐç ßÞÒÕ×ÐÝ ØÛØ ãÝÕáØâÕ ØÜÕ/ØÜÕ äÐøÛÐ "
-"ãàÕòÐøÐ ã ÛØÝØøã ×Ð ãÝÞá"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "¸×ÐÑÕàØâÕ ßÞàâ ÝÐ ÚÞøØ øÕ ÒÐè àÐçãÝÐà ßÞÒÕ×ÐÝ."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (¿ÐàÐÛÕÛÝØ ßÞàâÞÒØ: /dev/lp0, /dev/lp1, ..., ÕÚÒØÒÐÛÕÝâØ áã LPT1:, "
-"LPT2:, ..., ßàÒØ USB èâÐÜßÐç: /dev/usb/lp0, ÔàãÓØ USB èâÐÜßÐç: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "¼ÞàÐâÕ ØÐÑàÐâØ/ãÝÕâØ èâÐÜßÐç/ãàÕòÐø!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "ÀãçÝÐ ÚÞÝäØÓãàÐæØøa"
-
-#: ../../printerdrake.pm_.c:467
-#, fuzzy
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-"´Ð ÛØ øÕ ÒÐè èâÐÜßÐç ÜãÛâØ-äãÝÚæØÞÝÐÛÝØ ãàÕòÐø Ø× HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 áÐ áÚÕÝÕàÞÜ)?"
-
-#: ../../printerdrake.pm_.c:484
-msgid "Installing HPOJ package..."
-msgstr "¸ÝáâÐÛØàÐÜ HPOJ ßÐÚÕâ..."
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr "¿àÞÒÕàÐÒÐÜ ãàÕòÐø Ø ßÞÔÕèÐÒÐÜ HPOJ ..."
-
-#: ../../printerdrake.pm_.c:507
-msgid "Installing SANE package..."
-msgstr "¸ÝáâÐÛØàÐÜ SANE ßÐÚÕâ..."
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr "ÁÚÕÝØàÐÜ ÝÐ ÒÐèÕÜ HP ÜãÛâØ-äãÝÚæØÞÝÐÛÝÞÜ ãàÕòÐøã"
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr "ºàÕØàÐÜ ßÞàâ ÔÞáâãßÐÝ ×Ð CUPS ..."
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr "ÃçØâÐÒÐÜ CUPS ÑÐ×ã ßÞÔÐâÐÚÐ..."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr "¾ßæØøÕ ×Ð ãÔÐùÕÝØ lpd"
-
-#: ../../printerdrake.pm_.c:627
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"´Ð ÑØ ÚÞàØáâØÛØ ãÔÐùÕÝØ lpd èâÐÜßÐç, ÜÞàÐâÕ ÔÐ ÞÑÕ×ÑÕÔØâÕ ØÜÕ åÞáâÐ ×Ð "
-"áÕàÒÕà ×Ð èâÐÜßÐúÕ ÚÐÞ Ø ØÜÕ èâÐÜßÐçÐ ÝÐ âÞÜ áÕàÒÕàã."
-
-#: ../../printerdrake.pm_.c:628
-msgid "Remote host name"
-msgstr "¸ÜÕ ãÔÐùÕÝÞÓ host-a"
-
-#: ../../printerdrake.pm_.c:629
-msgid "Remote printer name"
-msgstr "Ime uÔÐùÕÝØ èâÐÜßaça"
-
-#: ../../printerdrake.pm_.c:632
-msgid "Remote host name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ ãÔÐùÕÝÞÓ host-a!"
-
-#: ../../printerdrake.pm_.c:636
-msgid "Remote printer name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ ãÔÐùÕÝÞÓ èâÐÜßÐçÐ!"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)  ÞßæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:705
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"´Ð ÑØáâÕ ÜÞÓÛØ ÔÐ èâÐÜßÐâÕ ÝÐ SMB èâÐÜßÐçã, âàÕÑÐ ÔÐ ÝÐÒÕÔÕâÕ\n"
-"ØÜÕ åÞáâÐ (ÚÞøÕ ÝØøÕ ãÒÕÚ ØáâÞ ÚÐÞ TCP/IP ØÜÕ ÜÐèØÝÕ);\n"
-"IP ÐÔàÕáã èâÐÜßÐçÕÒÞÓ áÕàÒÕàÐ; ÔÕùÕÝÞ ØÜÕ èâÐÜßÐçÐ ÚÞÜÕ ßàØáâãßÐâÕ,\n"
-"ÚÐÞ Ø ßÞâàÕÑÝÐ ÚÞàØáÝØçÚÐ ØÜÕÝÐ Ø ÛÞ×ØÝÚÕ."
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr "SMB áÕàÒÕà  host:"
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr "SMB áÕàÒÕà IP:"
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr "´ÕùÕÝÞ (×ÐjÕÔÝØçÚÞ)  ØÜe :"
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr "ÀÐÔÝÐ ÓàãßÐ(Workgroup):"
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¼ÞàÐâÕ ÔÐâØ ØÛØ ØÜÕ áÕàÒÕàÐ ØÛØ úÕÓÞÒ IP!"
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr "½ÕÔÞáâÐøÕ ÔÕùÕÝÞ ØÜÕ ×Ð Samba-ã!"
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr "NetWare ÞßæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:804
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"´Ð ÑØáâÕ ÜÞÓÛØ ÔÐ èâÐÜßÐâÕ ÝÐ NetWare èâÐÜßÐç, âàÕÑÐ ÔÐ ÝÐÒÕÔÕâÕ ØÜÕ  "
-"NetWare áÕàÒÕàÐ ×Ð èâÐÜßÐç (ÚÞøÕ ÝØøÕ ãÒÕÚ ØáâÞ ÚÐÞ TCP/IPhostname! );âÕ  "
-"ØÜÕ 'àÕÔÐ' èâÐÜßÐçÐ ÚÞÜÕ ßàØáâãßÐâÕ,ÚÐÞ Ø ßÞâàÕÑÝÐ ÚÞàØáÝØçÚÐ ØÜÕÝÐ Ø "
-"ÛÞ×ØÝÚÕ."
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr "ÁÕàÒÕà èâÐÜßÐçÐ:"
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr "Print Queue ØÜÕ:"
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ NCP áÕàÒÕàÐ!"
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ ×Ð NCP àÕÔ!"
-
-#: ../../printerdrake.pm_.c:854
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket ¾ßæØøÕ ÈâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"´Ð ÑØ èâÐÜßÐÛØ ÝÐ TCP ØÛØ socket èâÐÜßÐç, ÜÞàÐâÕ ÔÐ ÞÑÕ×ÑÕÔØâÕ ØÜÕ åÞáâÐ ×Ð "
-"èâÐÜßÐçÐ âÕ (ÞßæØøÐ) ÑàÞø ßÞàâÐ. ½Ð HP JetDirect áÕàÒÕàØÜÐ ÑàÞø ßÞàâÐ øÕ "
-"ÞÑØçÝÞ 9100, Ð ÝÐ ÔàãÓØÜ áÕàÒÕàØÜÐ ÜÞÖÕ ÑØâØ ÔàãÓÐçØøØ. ¿ÞÓÛÕÔÐøâÕ ãßãáâÒÞ "
-"ÚÞøÕ áâÕ ÔÞÑØÛØ ã× åÐàÔÒÕà."
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr "¸ÜÕ åÞáâÐ ×Ð èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:860
-msgid "Printer host name missing!"
-msgstr "½ÕÔÞáâÐøÕ ØÜÕ åÞáâÐ!"
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-msgid "Printer Device URI"
-msgstr "ÃàeòÐj ×Ð èâÐÜßÐç URI"
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"¼ÞÖÕâÕ ÔØàÕÚâÝÞ ÞÔàÕÔØâØ URI ×Ð ßàØáâãß èâÐÜßÐçã. URI ÜÞàÐ ØáßãúÐÒÐâØ ØÛØ "
-"CUPS ØÛØ Foomatic áßÕæØäØÚÐæØøÕ. ·ÐßÐÜâØâÕ ÔÐ ÝØáã áÒØ URI âØßÞÒØ ßÞÔàÖÐÝØ."
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr "¼ÞàÐâÕ ãÝÕâØ ÒÐÛØÔÐÝ URI!"
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"ÁÒÐÚØ èâÐÜßÐç ÜÞàÐ ÔÐ ØÜÐ ØÜÕ (ÝÐ ßàØÜÕà \"èâÐÜßÐç\"). ¿ÞùÐ ×Ð ¾ßØá Ø "
-"»ÞÚÐæØøã ÝÕ ÜÞàÐøã ÑØâØ ßÞßãúÕÝÐ. ÂÞ áã áÐÜÞ ÚÞàØáÝÕ ÝÐßÞÜÕÝÕ ×Ð ÚÞàØáÝØÚÕ."
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr "¸ÜÕ èâÐÜßÐça"
-
-#: ../../printerdrake.pm_.c:1008
-msgid "Description"
-msgstr "¾ßØá"
-
-#: ../../printerdrake.pm_.c:1009
-msgid "Location"
-msgstr "»ÞÚÐæØja"
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr "¿àØßàÕÜÐÜ ÑÐ×ã ßÞÔÐâÐÚÐ ×Ð èâÐÜßÐçÕ..."
-
-#: ../../printerdrake.pm_.c:1114
-msgid "Your printer model"
-msgstr "²Ðè ÜÞÔÕÛ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake øÕ ãßÞàÕòØÒÐÞ ØÜÕ ÜÞÔÕÛÐ ÔÞÑØøÕÝÞÓ ÐãâÞÔÕâÕÚæØøÞÜáÐ ÜÞÔÕÛØÜÐ "
-"ßàØÚÐ×ÐÝØÜ ã úÕÓÞÒÞø ÑÐ×Ø ßÞÔÐâÐÚÐ ÔÐ ÑØ ßàÞÝÐèÐÞ ÞÔÓÞÒÐàÐøãûØ. ¾ÒÐø Ø×ÑÞà "
-"ÜÞÖÕ ÑØâØ ßÞÓàÕèÐÝ, ßÞáÕÑÝÞ ÚÐÔÐ áÕ ÒÐè èâÐÜßÐç ãÞßèâÕÝÕ ÝÐÛÐ×Ø ã ÑÐ×Ø "
-"ßÞÔÐâÐÚÐ. ·ÐâÞ ßàÞÒÕàØâÕ ÔÐ øÕ Ø×ÑÞà ØáßàÐÒÐÝ Ø ÚÛØÚÝØâÕ \"¾ÒÐø ÜÞÔÕÛ øÕ "
-"ØáßàÐÒÐÝ\" ãÚÞÛØÚÞ øÕáâÕ Ð ãÚÞÛØÚÞ ÝØøÕ, ÚÛØÚÝØâÕ \"ÀãçÝÞ Ø×ÐÑÕàØâÕ ÜÞÔÕÛ\" "
-"ÔÐ ÑØ ÜÞÓÛØ ÔÐ áÐÜØ Ø×ÐÑÕàÕâÕ èâÐÜßÐç ÝÐ áÛÕÔÕûÕÜ ÕÚàÐÝã.\n"
-"\n"
-"·Ð ÒÐè èâÐÜßÐç Printerdrake øÕ ßàÞÝÐèÐÞ:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-msgid "The model is correct"
-msgstr "¾ÒÐø ÜÞÔÕÛ øÕ âÐçÐÝ"
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-msgid "Select model manually"
-msgstr "ÀãçÝÞ Ø×ÐÑÕàØâÕ ÜÞÔÕÛ"
-
-#: ../../printerdrake.pm_.c:1141
-msgid "Printer model selection"
-msgstr "ÁÕÛÕÚæØøÐ ÜÞÔÕÛÐ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1142
-msgid "Which printer model do you have?"
-msgstr "ºÞøã ÜÞÔÕÛ èâÐÜßÐçÐ ØÜÐâÕ?"
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"¿àÞÒÕàØâÕ ÔÐ ÛØ øÕ Printerdrake ÐãâÞ-ÔÕâÕÚâÞÒÐÞ ÒÐè èâÐÜßÐç ÚÞàÕÚâÝÞ. "
-"¿ÞâàÐÖØâÕ ßàÐÒØ ÜÞÔÕÛ ÝÐ ÛØáâØ ÚÐÔÐ ÚãàáÞà áâÞøØ ÝÐ ßÞÓàÕèÝÞ Ø×ÐÑàÐÝÞÜ "
-"ÜÞÔÕÛã ØÛØ ÝÐ \"Raw èâÐÜßÐç\"."
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"ÃÚÞÛØÚÞ áÕ ÒÐè èâÐÜßÐç ÝÕ ÝÐÛÐ×Ø ÝÐ ÛØáâØ, Ø×ÐÑÕàØâÕ ÚÞÜßÐâØÑØÛÝØ "
-"(ßÞÓÛÕÔÐøâÕ ãßãáâÒÞ ×Ð èâÐÜßÐç) ØÛØ  áÛØçÐÝ úÕÜã."
-
-#: ../../printerdrake.pm_.c:1222
-msgid "OKI winprinter configuration"
-msgstr "OKI win èâÐÜßÐç ÚÞÝäØÓãàÐæØøÐ"
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"ÂàÕÑÐ ÔÐ ßÞÔÕáØâÕ  OKI ÛÐáÕàáÚØ win èâÐÜßÐç. ¾ÒØ èâÐÜßÐçØ\n"
-"ÚÞàØáâÕ ÒÕÞÜÐ áßÕæØøÐÛØ×ÞÒÐÝÕ ÚÞÜãÝØÚÐæØÞÝÕ ßàÞâÞÚÞÛÕ Ø ×ÑÞÓ âÞÓÐ ÞÝØ àÐÔÕ "
-"áÐÜÞ ÚÐÔÐ áã ßÞÒÕ×ÐÝØ ÝÐ ßàÒØ ßÐàÐÛÕÛÝØ ßÞàâ. ºÐÔÐ øÕ ÒÐè èâÐÜßÐç ßÞÒÕ×ÐÝ ÝÐ "
-"ÔàãÓØ ßÞàâ ØÛØ ÝÐ áÕàÒÕà ßÞÒÕÖØâÕ èâÐÜßÐç ÝÐ ßàÒØ ßÐàÐÛÕÛÝØ ßÞàâ ßàÕ ÝÕÓÞ "
-"ØèâÐÜßÐâÕ âÕáâ áâàÐÝØæã ØÛØ ÒÐè èâÐÜßÐç ÝÕûÕ àÐÔØâØ. ¿ÞáâÐÒÚÕ ×Ð ÒÐè âØß "
-"ÚÞÝÕÚæØøÕ ûÕ ÑØâØ ØÓÝÞàØáÐÝÕ ÞÔ áâàÐÝÕ ÔàÐøÒÕàÐ."
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-msgid "Lexmark inkjet configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ Lexmark inkjet èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"´àÐøÒÕàØ ×Ð inkjet èâÐÜßÐçÕ ÚÞøÕ øÕ ÞÑÕ×ÑÕÔØÞ Lexmark áÐÜÞ ßÞÔàÖÐÒÐøã "
-"ÛÞÚÐÛÝÕ èâÐÜßÐçÕ, Ð ÝÕ Ø èâÐÜßÐçÕ ÝÐ ãÔÐùÕÝØÜ ÜÐèØÝÐÜÐ ØÛØ ßàØÝâ áÕàÒÕàØÜÐ. "
-"¿ÞÒÕÖØâÕ ÒÐè èâÐÜßÐç ÝÐ ÛÞÚÐÛÝØ ßÞàâ ØÛØ ÓÐ ßÞÔÕáØâÕ ÝÐ ÜÐèØÝØ ÝÐ ÚÞøã øÕ "
-"ßÞÒÕ×ÐÝ."
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"´Ð ÑØ ÜÞÓÛØ ÔÐ èâÐÜßÐâÕ ÝÐ ÒÐèÕÜ Lexmark inkjet èâÐÜßÐçã ÜÞàÐâÕ ÔÐ ØÜÐâÕ "
-"ÔàÐøÒÕàÕ ÚÞøÕ øÕ ÚàÕØàÐÞ Lexmark (http://www.lexmark.com/). ¸ÔØâÕ ÝÐ US áÐøâ "
-"Ø ÚÛØÚÝØâÕ ÝÐ âÐáâÕà \"´àÐøÒÕàØ\". ÝÐÚÞÝ âÞÓÐ Ø×ÐÑÕàØâÕ ÒÐè ÜÞÔÕÛ Ø "
-"ÞßÕàÐâØÒÝØ áØáâÕÜ, ã ÒÐèÕÜ áÛãçÐøã \"Linux\". ´àÐøÒÕàØ áã ãßÐÚÞÒÐÝØ ã RPM "
-"ßÐÚÕâÕ ØÛØ shell áÚàØßâÕ áÐ ØÝâÕàÐÚâØÒÝÞÜ ÓàÐäØçÚÞÜ ØÝáâÐÛÐæØøÞÜ. ½Õ ÜÞàÐâÕ "
-"ÔÐ dàÐÔØâÕ ÞÒã ÚÞÝäØÓãàÐæØøã. ¿àØâØáÝØâÕ Cancel ÞÔÜÐå ÝÐÚÞÝ ÃÓÞÒÞàÐ Þ "
-"ÛØæÕÝæØ. ¾ÝÔÐ ØèâÐÜßÐøâÕ printhead alignment áâàÐÝØæÕ áÐ \"lexmarkmaintain\" "
-"Ð ßÞÔÕáØâÕ ÞßæØøÕ ×Ð ßÞÛÞÖÐø ÓÛÐÒÕ áÐ ÞÒØÜ ßàÞÓàÐÜÞÜ."
-
-#: ../../printerdrake.pm_.c:1510
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"default ÞßæØøÕ ×Ð èâÐÜßÐç\n"
-"\n"
-"¿àÞÒÕàØâÕ ÔÐ ÛØ áã ÒÕÛØçØÝÐ ßÐßØàÐ Ø ÒàáâÐ âØÝâÕ/ÜÞÔ èâÐÜßÐúÐ (ãÚÞÛØÚÞ øÕ "
-"ÔÞáâãßÐÝ) ÚÐÞ Ø åÐàÔÒÕàáÚÐ ÚÞÝäØÓãàÐæØøÐ ×Ð ÛÐáÕàáÚÕ èâÐÜßÐçÕ (ÜÕÜÞàØøÐ, "
-"duplex øÕÔØÝØæÐ, ÔÞÔÐâÝÕ ÚÐáÕâÕ) ßÞÔÕèÕÝØ ØáßàÐÒÝÞ. ¸ÜÐøâÕ ÝÐ ãÜã ÔÐ ßàØ "
-"ÒØáÞÚÞÜ ÚÒÐÛØâÕâã èâÐÜßÕ/àÕ×ÞÛãæØøØ èâÐÜßÕ èâÐÜßÐúÕ ÜÞÖÕ ÑØâØ ×ÝÐçÐøÝØøÕ "
-"ãáßÞàÕÝÞ."
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "¾ßæØøÐ %s ÜÞàÐ ÑØâØ ÑàÞø!"
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "¾ßæØøÐ %s ÜÞàÐ ÑØâØ ÑàÞø!"
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr "¾ßæØøÕ %s ÒÐÝ ÞßáÕÓÐ!"
-
-#: ../../printerdrake.pm_.c:1567
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ßÞÔÕáØâÕ ÞÒÐø èâÐÜßÐç (\"%s\")\n"
-"ÚÐÞ default èâÐÜßÐç?"
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Test pages"
-msgstr "ÂÕáâØàÐúÕ áâàÐÝØæÐ"
-
-#: ../../printerdrake.pm_.c:1585
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"¸×ÐÑÕàØâÕ âÕáâ áàÐÝØæã ÚÞøã ÖÕÛØâÕ ÔÐ èâÐÜßÐâÕ.\n"
-"½ÐßÞÜÕÝÐ: ÃÚÞÛØÚÞ áÕ àÐÔØ Þ äÞâÞ âÕáâ áâàÐÝØæØ ÜÞÖÕ ÑØâØ ßÞâàÕÑÝÞ ÜÝÞÓÞ ÒØèÕ "
-"ÒàÕÜÕÝÐ ÔÐ ÑØ áÕ ØèâÐÜßÐÛÐ Ð ÛÐáÕàáÚØ èâÐÜßÐçØ áÐ ÜÐÛÞ ÜÕÜÞàØøÕ øÕ çÐÚ ÝÕûÕ "
-"ÝØ ØèâÐÜßÐâØ. à ÒÕûØÝØ áÛãçÐøÕÒÐ ÔÞÒÞùÝÞ øÕ ÔÐ ØèâÐÜßÐâÕ áâÐÝÔÐàÔÝã âÕáâ "
-"áâàÐÝØæã."
-
-#: ../../printerdrake.pm_.c:1589
-msgid "No test pages"
-msgstr "±Õ× âÕáâ áâàÐÝØæÕ"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Print"
-msgstr "ÈâÐÜßÐø"
-
-#: ../../printerdrake.pm_.c:1592
-msgid "Standard test page"
-msgstr "ÁâÐÝÔÐàÔÝÐ âÕáâ áâàÐÝØæÐ"
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr "°ÛâÕàÝÐâØÒÝÐ âÕáâ áâàÐÝØæÐ"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Alternative test page (A4)"
-msgstr "°ÛâÕÕàÝÐâØÒÝÐ âÕáâ áâàÐÝØæÐ (A4)"
-
-#: ../../printerdrake.pm_.c:1600
-msgid "Photo test page"
-msgstr "ÄÞâÞ âÕáâ áâàÐÝØæÐ"
-
-#: ../../printerdrake.pm_.c:1604
-msgid "Do not print any test page"
-msgstr "½ÕÜÞø ÔÐ èâÐÜßÐø ÑØÛÞ ÚÞøã âÕáâ áâàÐÝØæã"
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr "ÈâÐÜßÐÜ âÕáâ áâàÐÝ(ØæÕ)ã..."
-
-#: ../../printerdrake.pm_.c:1637
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ÂÕáâ áâàÐÝ(ØæÕ)Ð øÕ ßÞáÛÐÝÐ èâÐÜßÐç ÔÕÜÞÝã.\n"
-"ÂÞ ÜÞÖÕ ÔÞÒÕáâØ ÔÞ ÜÐÛÞÓ ÞÔÛÐÓÐúÐ áâÐàâÐ èâÐÜßÐçÐ.\n"
-"ÁâÐâãá èâÐÜßÐçÐ:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1641
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"ÂÕáâ áâàÐÝ(ØæÕ)Ð øÕ ßÞáÛÐÝÐ èâÐÜßÐç ÔÕÜÞÝã.\n"
-"ÂÞ ÜÞÖÕ ÔÞÒÕáâØ ÔÞ ÜÐÛÞÓ ÞÔÛÐÓÐúÐ áâÐàâÐ èâÐÜßÐçÐ.\n"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr "´Ð ÛØ àÐÔØ ØáßàÐÒÝÞ?"
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-msgid "Raw printer"
-msgstr "Raw èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"´Ð ÑØ èâÐÜßÐÛØ äÐøÛ Ø× ÚÞÜÐÝÔÝÕ ÛØÝØøÕ (ØÛØ ßàÞ×ÞàÐ âÕàÜØÝÐÛÐ) ÜÞÖÕâÕ ØÛØ "
-"ÚÞàØáâØâØ ÚÞÜÐÝÔã \"%s <äÐøÛ>\" ØÛØ ßàÐäØçÚØ ÐÛÐâ ×Ð èâÐÜßÐúÕ: \"xpp <äÐøÛ>"
-"\" ØÛØ \"kprinter <äÐøÛ>\". ³àÐäØçÚØ ÐÛÐâØ ÒÐÜ ÔÞ×ÞÒÞùÐÒÐøã ÔÐ Ø×ÐÑÕàÕâÕ "
-"èâÐÜßÐç Ø Ø×ÜÕÝØâÕ ÞßæØøÕ ÒÕÞÜÐ ÛÐÚÞ.\n"
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"¾ÒÕ ÚÞÜÐÝÔÕ âÐÚÞòÕ ÜÞÖÕâÕ ÚÞàØáâØâØ ã ßÞùã \"ºÞÜÐÝÔÕ ×Ð èâÐÜßÐúÕ\" ÔØøÐÛÞÓÐ "
-"×Ð èâÐÜßÐúÕ ã ÒÕûÕÜ ÑàÞøã ÐßÛØÚÐæØøÐ, ÐÛØ ÞÒÔÕ ÝÕÜÞøâÕ ÔÐ ÞÔàÕòãøÕâÕ ØÜÕ "
-"äÐøÛÐ øÕà úÕÓÐ ßÞáâÐÒùÐ áÐÜÐ ÐßÛØÚÐæØøÐ Ø× ÚÞøÕ èâÐÜßÐâÕ.\n"
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"ºÞÜÐÝÔÐ \"%s\" âÐÚÞòÕ ÔÞ×ÒÞùÐÒÐ Ø×ÜÕÝã ÞßæØøÐ ×Ð ÚÞÝÚàÕâÝØ ßÞáÐÞ èâÐÜßÐúÐ. "
-"¨ÕÔÝÞáâÐÒÝÞ ÔÞÔÐøâÕ ÖÕùÕÝÕ ÞæØøÕ ã ÚÞÜÐÝÔÝã ÛØÝØøã, e. g. \"%s <äÐøÛ>\". "
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"´Ð ÑØ ×ÝÐÛØ ÚÞøÕ áã ÒÐÜ ÞßæØøÕ ÔÞáâãßÝÕ ×Ð âÕÚãûØ èâÐÜßÐç ßàÞçØâÐøâÕ ÛØáâã "
-"ÚÞøÐ øÕ ÔÞÛÕ ßàØÚÐ×ÐÝÐ ØÛØ ÚÛØÚÝØâÕ ÝÐ âÐáâÕà \"»Øáâã ÞßæØøÐ ×Ð èâÐÜßÐúÕ\".%"
-"s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"¾ÒÔÕ áÕ ÝÐÛÐ×Ø ÛØáâÐ ÔÞáâãßÝØå ÞßæØøÐ ×Ð èâÐÜßÐúÕ ×Ð âÕÚãûØ èâÐÜßÐç:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"´Ð ÑØ èâÐÜßÐÛØ äÐøÛ Ø× ÚÞÜÐÝÔÝÕ ÛØÝØøÕ (ßàÞ×ÞàÐ âÕàÜØÝÐÛÐ) ÚÞàØáâØâÕ ÚÞÜÐÝÔã "
-"\"%s <äÐøÛ>\".\n"
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"¾ÒÐ ÚÞÜÐÝÔÐ ÒÐÜ øÕ ÔÞáâãßÝÐ Ø ã ßÞùã \"ºÞÝÐÔÕ ×Ð èâÐÜßÐúÕ\" ÔØøÐÛÞÓÐ ×Ð "
-"èâÐÜßÐúÕ ã ÒÕûØÝØ ÐßÛØÚÐæØøÐ. °ÛØ ã âÞÜ áÛãçÐøã ÝÕÜÞøâÕ ÔÐ ãßØáãøÕâÕ ØÜÕ "
-"äÐøÛÐ øÕà øÕ ÞÝÞ ÒÕû ÔÞÔÕùÕÝÞ ÞÔ áâàÐÝÕ ÐßÛØÚÐæØøÕ.\n"
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"´Ð ÑØ ÔÞÑØÛØ ÛØáâã ÔÞáâãßÝØå ÞßæØøÐ ×Ð âàÕÝãâÝØ èâÐÜßÐç ÚÛØÚÝØâÕ ÝÐ âÐáâÕà "
-"\"»ØáâÐ ÞßæØøÐ èâÐÜßÐçÐ\"."
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"´Ð ÑØ èâÐÜßÐÛØ äÐøÛ Ø× ÚÞÜÐÝÔÝÕ ÛØÝØøÕ (ßàÞ×ÞàÐ âÕàÜØÝÐÛÐ) ÚÞàØáâØâÕ ÚÞÜÐÝÔã "
-"\"%s <äÐøÛ>\" ØÛØ \"%s <äÐøÛ>\".\n"
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"ÂÐÚÞòÕ ÜÞÖÕâÕ ÔÐ ÚÞàØáâØâÕ Ø ÓàÐäØçÚØ ØÝâÕàäÕøá \"xpdq\" ×Ð ÞßæØøÕ ×Ð "
-"ßÞÔÕèÐÒÐúÕ ßÞáÛÞÒÐ èâÐÜßÐúÐ.\n"
-"°ÚÞ ÚÞàØáâØâÕ KDE ÚÐÞ ÔÕáÚâÞß ÞÚàãÖÕúÕ ØÜÐâÕ \"ßÐÝØçÝÞ ÔãÓÜÕ\", ØÚÞÝØæã ÝÐ "
-"ÔÕáÚâÞßã, Þ×ÝÐçÕÝã áÐ \"·°ÃÁ°²¸ ÈâÐÜßÐç!\",ÚÞøØ ×ÐãáâÐÒùÐ áÒÕ ßÞáÛÞÒÕ "
-"èâÐÜßÐúÐ øÚÐÔÐ ÚÛØÚÝÕâÕ ÝÐ âÐø âÐáâÕà. ¾ÒÞ øÕ ÝÐ ßàØÜÕà ÚÞàØáÝÞ ÚÐÔÐ áÕ "
-"×ÐÓÛÐÒØ ßÐßØà.\n"
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"ºÞÜÐÝÔÕ \"%s\" Ø \"%s\" âÐÚÞòÕ ÞÜÞÓãûÐÒÐøã Ø×ÜÕÝã ÞßæØøÐ ×Ð ÚÞÝÚàÕâÝØ ßÞáÐÞ "
-"èâÐÜßÐúÐ. ¨ÕÔÝÞáâÐÒÝÞ ÔÞÔÐøâÕ ÖÕùÕÝÕ ÞßæØøÕ ã ÚÞÜÐÝÔÝã ÛØÝØøã, e. g. \"%s "
-"<äÐøÛ>\".\n"
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-msgid "Close"
-msgstr "·ÐâÒÞàØ"
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ÈâÐÜßÐÜ/ÁÚÕÝØàÐÜ ÝÐ \"%s\""
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ÈâÐÜßÐÜ ÝÐ èâÐÜßÐçã \"%s\""
-
-#: ../../printerdrake.pm_.c:1746
-msgid "Print option list"
-msgstr "»ØáâÐ áÐ ÞßæØøÐÜÐ ×Ð èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"²Ðè HP ÜãÛâØ-äãÝÚæØÞÝÐÛÝØ ãàÕòÐø øÕ ÐãâÞÜÐâáÚØ ßÞÔÕèÕÝ ÔÐ ÑØ ÜÞÓÐÞ ÔÐ "
-"áÚÕÝØàÐ. ÁÐÔÐ ÜÞÖÕâÕ ÔÐ áÚÕÝØàÐâÕ áÐ \"scanimage\" (\"scanimage -d hp:%s\" "
-"ÔÐ ÑØ ÞÔàÕÔØÛØ áÚÕÝÕà ÚÞÔÐ ØÜÐâÕ ÒØèÕ ÞÔ øÕÔÝÞÓ) Ø× ÚÞÜÐÝÔÝÕ ÛØÝØøÕ ØÛØ áÐ "
-"ÓàÐäØçÚØÜ ØÝâÕàäÕøáØÜÐ \"xscanimage\" ØÛØ \"xsane\". ÃÚÞÛØÚÞ ÚÞàØáâØâÕ the "
-"GIMP, ÜÞÖÕâÕ âÐÚÞòÕ áÚÕÝØàÐâØ ÑØàÐúÕÜ ÞÔÓÞÒÐàÐøãûÕ áâÐÒÚÕ ã \"ÄÐøÛe\"/"
-"\"Acquire\" ÜÕÝØøã. ¿ÞÓÛÕÔÐøâÕ Ø \"man scanimage\" Ø \"man sane-hp\" ã "
-"ÚÞÜÐÝÔÝÞø ÛØÝØøØ ×Ð ÒØèÕ ØÝäÞàÜÐæØøÐ.\n"
-"\n"
-"½Õ ÚÞàØáâØ \"scannerdrake\" ×Ð ÞÒÐø ãàÕòÐø!"
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"²Ðè HP ÜãÛâØ-äãÝÚæØÞÝÐÛÝØ ãàÕòÐø øÕ ÐãâÞÜÐâáÚØ ßÞÔÕèÕÝ ÔÐ ÑØ ÑØÞ ã "
-"ÜÞÓãûÝÞáâØ ÔÐ áÚÕÝØàÐ. ÁÐÔÐ ÜÞÖÕâÕ ÔÐ áÚÕÝØàÐâÕ Ø× ÚÞÜÐÝÔÝÕ ÛØÝØøÕ áÐ  "
-"\"ptal-hp %s scan ...\". ÁÚÕÝØàÐúÕ Ø× ÓàÐäØçÚÞÓ ØÝâÕàäÕøáÐ ØÛØ Ø× GIMP-Ð "
-"ÝØøÕ ßÞÔàÖÐÝÞ øÞè ãÒÕÚ ×Ð ÒÐè ãàÕòÐø. ²ØèÕ ØÝäÞàÜÐæØøÐ ÜÞÖÕâÕ ßàÞÝÐûØ ã  \"/"
-"usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" äÐøÛã ÝÐ ÒÐèÕÜ áØáâÕÜã. ÃÚÞÛØÚÞ "
-"ØÜÐâÕ HP LaserJet 1100 ØÛØ 1200 ÜÞÖÕâÕ áÚÕÝØàÐâØ áÐÜÞ ÐÚÞ ØÜÐâÕ ØÝáâÐÛØàÐÝã "
-"áÚÕÝÕà ÞßæØøã.\n"
-"\n"
-"½Õ ÚÞàØáâØ \"scannerdrake\" ×Ð ÞÒÐø ãàÕòÐø!"
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr "ÃçØâÐÒÐÜ ßÞÔÐâÚÕ ×Ð èâÐÜßÐç ..."
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-msgid "Transfer printer configuration"
-msgstr "ºÞÝäØÓãàÐæØøÐ ×Ð âàÐÝáäÕà èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1818
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"¼ÞÖÕâÕ ÚÞßØàÐâØ ÚÞÝäØÓãàÐæØøã èâÐÜßÐçÐ ÚÞøã áâÕ ×ÐÒàèØÛØ ×Ð spooler %s to %"
-"s, ÒÐè âàÕÝãâÝØ spooler. ÁÒØ ÚÞÝäØÓãàÐæØÞÝØ ßÞÔÐæØ (ØÜÕ èâÐÜßÐçÐ, ÞßØá, "
-"ÛÞÚÐæØøÐ, âØß ÚÞÝÕÚæØøÕ, Ø default ÞßæØøÕ) áÕ ÜÞÓã ßàÕã×ÕâØ, ÐÛØ ÝÕ Ø "
-"ßÞáÛÞÒØ èâÐÜßÐúÐ.\n"
-"½Ø áÒØ queues ÝÕ ÜÞÓã ÑØâØ ßàÕÑÐçÕÝØ ×ÑÞÓ áÛÕÔÕûØå àÐ×ÛÞÓÐ:\n"
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ÝÕ ßÞÔàÖÐÒÐ èâÐÜßÐçÕ ÝÐ Novell áÕàÒÕàØÜÐ ØÛØ èâÐÜßÐçØÜÐ ÚÞøØ èÐùã "
-"ßÞÔÐâÚÕ ã áÛÞÑÞÔÝÞ-äÞàÜØàÐÝã ÚÞÜÐÝÔã.\n"
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ßÞÔàÖÐÒÐ áÐÜÞ ÛÞÚÐÛÝÕ èâÐÜßÐçÕ, ãÔÐùÕÝÕ LPD èâÐÜßÐçÕ, Ø Socket/TCP "
-"èâÐÜßÐçÕ.\n"
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD Ø LPRng ÝÕ ßÞÔàÖÐÒÐøã IPP èâÐÜßÐçÕ.\n"
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"ºÐÞ ÔÞÔÐâÐÚ, queues ÚÞøØ áã ÚàÕØàÐÝØ áÐ ÞÒØÜ ßàÞÓàÐÜÞÜ ØÛØ  \"foomatic-"
-"configure\" ÝÕ ÜÞÓã ÑØâØ ßàÕÑÐçÕÝØ."
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"ÂÐÚÞòÕ, èâÐÜßÐçØ ÚÞÝäØÓãàØáÐÝØ áÐ PPD äÐøÛÞÒØÜÐ ÚÞøØ ßÞâØçã ÞÔ ßàÞØ×ÒÞòÐçÐ "
-"ØÛØ áÐ ÞáÝÞÒÝØÜ CUPS ÔàÐøÒÕàØÜÐ ÝÕ ÜÞÓã ÑØâØ ßàÕÑÐçÕÝØ."
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"¾×ÝÐçØâÕ èâÐÜßÐçÕ ÚÞøÕ ÖÕÛØâÕ ÔÐ ßàÕÑÐæØâÕ Ø ÚÛØÚÝØâÕ ÝÐ \n"
-"\"¿àÕÑÐæØ\"."
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr "½Õ ßàÕÑÐæãø èâÐÜßÐçÕ"
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr "¿àÕÑÐæØ"
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"ÈâÐÜßÐç \"%s\" ÒÕû ßÞáâÞøØ ßÞÔ  %s. \n"
-"ºÛØÚÝØ ÝÐ \"¿àÕÑÐæØ\" ÔÐ ÑØ ßàÕèÛØ ßàÕÚÞ áâÐàÞÓ.\n"
-"¼ÞÖÕâÕ ãÚãæÐâØ Ø ÝÞÒÞ ØÜÕ ØÛØ ßàÕáÚÞçØâØ ÞÒÐø èâÐÜßÐç."
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "¸ÜÕ èâÐÜßaçÐ âàÕÑÐ ÔÐ áÐÔàÖØ áÐÜÞ áÛÞÒa, ÑàÞjÕÒÕ Ø underscore"
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"ÈâÐÜßÐç \"%s\" ÒÕû ßÞáâÞøØ,\n"
-"ÔÐ ÛØ áâÒÐàÝÞ ÖÕÛØâÕ ÔÐ ßÞÝÞÒÞ ãßØèÕâÕ úÕÓÞÒÕ ÞßæØøÕ?"
-
-#: ../../printerdrake.pm_.c:1867
-msgid "New printer name"
-msgstr "½ÞÒÞ ØÜÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr "ÂàÐÝáäÕàØèÕÜ %s ..."
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"¿àÕÑÐæØÛØ áâÕ áÒÞø ÑØÒèØ default èâÐÜßÐç (\"%s\"), ´Ð ÛØ âàÕÑÐ ÔÐ ÑãÔÕ "
-"ßÞÝÞÒÞ default èâÐÜßÐç ßÞÔ ÝÞÒØÜ áØáâÕÜÞÜ ×Ð èâÐÜßÐúÕ %s?"
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr "¾áÒÕÖÐÒÐÜ ßÞÔÐâÐÚÕ Þ èâÐÜßÐçã..."
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-msgid "Configuration of a remote printer"
-msgstr "¿ÞÔÕèÐÒÐúÕ ãÔÐùÕÝÞÓ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:1899
-msgid "Starting network..."
-msgstr "ÁâÐàâãøÕÜ ÜàÕÖã ..."
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-msgid "Configure the network now"
-msgstr "¿ÞÔÕáØ ÜàÕÖã áÐÔÐ"
-
-#: ../../printerdrake.pm_.c:1934
-msgid "Network functionality not configured"
-msgstr "¼àÕÖÝÐ äãÝÚæØÞÝÐÛÝÞáâ ÝØøÕ ßÞÔÕèÕÝÐ"
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"ÂàÕÑÐ ÔÐ ßÞÔÕáØâÕ ãÔÐùÕÝØ èâÐÜßÐç. ·Ð âÞ ÒÐÜ øÕ ßÞâàÕÑÐÝ ÜàÕÖÝØ ßàØáâãß, ÐÛØ "
-"ÒÐèÐ ÜàÕÖÐ ÝØøÕ øÞè ßÞÔÕèÕÝÐ. ÃÚÞÛØÚÞ ÝÐáâÐÒØâÕ ÑÕ× ÜàÕÖÕ ÚÞÝäØÓãàÐæØøÕ, "
-"ÝÕûÕâÕ ÜÞûØ ÔÐ ÚÞàØáâØâÕ èâÐÜßÐç ÚÞøØ áÐÔÐ ßÞÔÕèÐÒÐâÕ. ºÐÚÞ ÖÕÛØâÕ ÔÐ "
-"ÝÐáâÐÒØâÕ?"
-
-#: ../../printerdrake.pm_.c:1938
-msgid "Go on without configuring the network"
-msgstr "½ÐáâÐÒØ ÔÐùÕ ÑÕ× ßÞÔÕèÐÒÐúÐ ÜàÕÖÕ"
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"¼àÕÖÝÐ ÚÞÝäØÓãàÐæØøÐ ÚÞøÐ øÕ ÚàÕØàÐÝÐ âÞÚÞÜ ØÝáâÐÛæØøÕ ÝÕ ÜÞÖÕ áÐÔÐ ÔÐ áÕ "
-"ßÞÚàÕÝÕ. ¿àÞÒÕàØâÕ ÔÐ ÛØ øÕ ÜàÕÖÐ ÔÞáâãßÝÐ ÝÐÚÞÝ àÕáâÐàâÐ áØáâÕÜÐ Ø "
-"ØáßàÐÒØâÕ ÚÞÝäØÓãàÐæØøã ÚÞàØáâÕûØ Mandrake CºÞÝâàÞÛÝØ ÆÕÝâÐà, áÕÚæØøÐ "
-"\"¼àÕÖÐ & ¸ÝâÕàÝÕâ\"/\"ºÞÝÕÝÚæØøÐ\", Ø ÝÐÚÞÝ âÞÓÐ ßÞÔÕáØâÕ èâÐÜßÐç, âÐÚÞòÕ "
-"ÚÞàØèâÕúÕÜ Mandrake ºÞÝâàÞÛÝÞÓ ÆÕÝâàÐ, áÕÚæØøÐ \"ÅÐàÔÒÕà\"/\"ÈâÐÜßÐç\""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"¼àÕÖÝØ ßàØáâãß ÝØøÕ ßÞÚàÕÝãâ Ø ÝÕ ÜÞÖÕ ÔÐ áÕ áâÐàâãøÕ. ¿àÞÒÕàØâÕ ÒÐèã "
-"ÚÞÝäØÓãàÐæØøã Ø ÒÐèÕ åÐàÔÒÕàáÚÕ ÚÞÜßÞÝÕÝâÕ. ¾ÝÔÐ ßàÞÑÐøâÕ ßÞÝÞÒÐ ÔÐ ßÞÔÕáØâÕ "
-"ãÔÐùÕÝØ èâÐÜßÐç."
-
-#: ../../printerdrake.pm_.c:1982
-msgid "Restarting printing system..."
-msgstr "ÀÕáâÐàâãøÕÜ áØáâÕÜ ×Ð èâÐÜßaúÕ ..."
-
-#: ../../printerdrake.pm_.c:2020
-msgid "high"
-msgstr "ÒÕÛØÚØ"
-
-#: ../../printerdrake.pm_.c:2020
-msgid "paranoid"
-msgstr "ßÐàÐÝÞØÔÝØ"
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "¸ÝáâÐÛØàÐÜ áØáâÕÜ ×Ð èâÐÜßÐúÕ ã %s áØÓãàÝÞáÝÞÜ ÝØÒÞã"
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"ÁÐÔÐ âàÕÑÐ ÔÐ ØÝáâÐÛØàÐâÕ áØáâÕÜ ×Ð èâÐÜßÐúÕ %s ÝÐ áØáâÕÜã ÚÞøØ áÕ ÝÐÛÐ×Ø ã %"
-"s áØÓãàÝÞáÝÞÜ ÝØÒÞã.\n"
-"\n"
-"¾ÒÐø áØáâÕÜ ×Ð èâÐÜßÐúÕ ßÞÚàÕûÕ ÔÕÜÞÝ (ßÞ×ÐÔØÝáÚØ ßàÞæÕá) ÚÞøØ çÕÚÐ ÝÐ "
-"ßÞáÛÞÒÕ èâÐÜßÐúÐ Ø ãßàÐÒùÐ úØÜÐ. ¾ÒÐø ÔÕÜÞÝ øÕ âÐÚÞòÕ ÔÞáâãßÐÝ ßàÕÚÞ "
-"ãÔÐùÕÝØå ÜÐèØÝÐ ßàÕÚÞ ÜàÕÖÕ ßÐ øÕ âØÜÕ ßÞÔÛÞÖÐÝ ÝÐßÐÔØÜÐ. ·ÑÞÓ âÞÓÐ áÐÜÞ ßÐà "
-"Ø×ÐÑàÐÝØå ÔÕÜÞÝÐ áÕ áâÐàâãøÕ ßÞ default-ã ÝÐ ÞÒÞÜ áØÓãàÝÞáÝÞÜ ÝØÒÞã.\n"
-"\n"
-"´Ð ÛØ áâÒÐàÝÞ ÖÕÛØâÕ ÔÐ ßÞÔÕáØâÕ èâÐÜßÐúÕ ÝÐ ÞÒÞø ÜÐèØÝØ?"
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr "¿ÞÚàÕÝØ áØáâÕÜ ×Ð èâÐÜßÐúÕ ßàØ áâÐàÐúã áØáâÕÜÐ"
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"ÁØáâÕÜ ×Ð èâÐÜßÐúÕ (%s)ÝÕûÕ ÑØâØ ÐãâÞÜÐâáÚØ ßÞÚàÕÝãâ ßàØ áâÐàâÐúã ÜÐèØÝÕ.\n"
-"\n"
-"¼ÞÓãûÕ øÕ ÐãâÞÜÐâáÚÞ áâÐàâÐúÕ ØáÚùãçÕÝÞ ßàÞÜÕÝÞÜ ÝÐ ÒØèùØ ÝØÒÞ áØÓãàÝÞáâØ, "
-"×ÑÞÓ âÞÓÐ èâÞ øÕ áØáâÕÜ ×Ð èâÐÜßÐúÕ ßàØÜÐÜùØÒ ×Ð ÝÐßÐÔÕ.\n"
-"\n"
-"´Ð ÛØ ßÞÝÞÒÞ ÖÕÛØâÕ ÔÐ ÐãâÞÜÐâáÚØ áâÐàâãøÕâÕ áØáâÕÜ ×Ð èâÐÜßÐúÕ ?"
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr "¿àÞÒÕàÐÒÐÜ ØÝáâÐÛØàÐÝØ áÞäâÒÕà..."
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr "ÃÚÛÐúÐÜ LPRng..."
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr "ÃÚÛÐúÐÜ LPD..."
-
-#: ../../printerdrake.pm_.c:2208
-msgid "Select Printer Spooler"
-msgstr "¸×ÐÑÕàØâÕ Spooler ×Ð èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:2209
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ºÞøØ áØáâÕÜ ×Ð èâÐÜßaúÕ (spooler) ÖÕÛØâÕ ÔÐ ÚÞàØáâØâe ?"
-
-#: ../../printerdrake.pm_.c:2242
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "¿ÞÔÕèÐÒÐÜ èâÐÜßÐç \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2255
-msgid "Installing Foomatic..."
-msgstr "¸ÝáâÐÛØàÐÜ Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr "¾ßæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr "¿àØßàÕÜÐÜ PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "¿ÞÔÕèÐÒÐÜ èâÐÜßÐç \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2358
-msgid "Would you like to configure printing?"
-msgstr "´Ð ÛØ ÑØáâÕ ÔÐ ßÞÔÕáØâÕ èâÐÜßÐç?"
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr "ÁØáâÕÜ ×Ð èâÐÜßÐúÕ: "
-
-#: ../../printerdrake.pm_.c:2418
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2422
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"ÁÛÕÔÕûØ èâÐÜßÐçØ áã ßÞÔÕèÕÝØ. ´ÒÞÚÛØÚÝØâÕ ÝÐ èâÐÜßÐç ÔÐ ÑØ ßàÞÜÕÝØÛØ úÕÓÞÒÕ "
-"ßÞáâÐÒÚÕ; ÔÐ ÑØ ÓÐ ßÞáâÐÒØÛØ ×Ð default èâÐÜßÐç; ÔÐ ÑØ ÒØÔÕÛØ ØÝäÞàÜÐæØøÕ Þ "
-"úÕÜã; ØÛØ ÔÐ ÑØ ÞÜÞÓãûØÛØ èâÐÜßÐç ÝÐ ãÔÐùÕÝÞÜ CUPS áÕàÒÕàã ÔÞáâãßÝØÜ ×Ð Star/"
-"Open Office."
-
-#: ../../printerdrake.pm_.c:2423
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"ÁÛÕÔÕûØ èâÐThe following printers are configured. Double-click on a printer "
-"to change its settings; to make it the default printer; or to view "
-"information about it."
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"¾áÒÕÖØ ÛØáâã èâÐÜßÐçÐ (ÔÐ ÑØ ßàØÚÐ×ÐÞ áÒÕ ÔÞáâãßÝÕ ãÔÐùÕÝÕ CUPS èâÐÜßÐçÕ)"
-
-#: ../../printerdrake.pm_.c:2467
-msgid "Change the printing system"
-msgstr "¿àÞÜÕÝØâÕ áØáâÕÜ ×Ð èâÐÜßÐúÕ"
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "½ÞàÜÐÛÝØ ¼ÞÔ"
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-msgid "Do you want to configure another printer?"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ ßÞÔÕáØâÕ øÞè øÕÔÐÝ èâÐÜßÐç?"
-
-#: ../../printerdrake.pm_.c:2714
-msgid "Modify printer configuration"
-msgstr "¸×ÜÕÝÐ ÚÞÝäØÓãàÐæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:2716
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"ÈâÐÜßÐç %s\n"
-"´Ð ÛØ åÞûÕâÕ ÔÐ Ø×ÜÕÝØâÕ ÞßæØøÕ ×Ð ÞÒÐø èâÐÜßÐç?"
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr "ÃàÐÔØ âÞ!"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-msgid "Printer connection type"
-msgstr "ÂØß ÚÞÝÕÚæØøÕ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-msgid "Printer name, description, location"
-msgstr "¸ÜÕ, ÞßØá Ø ÛÞÚÐæØøÐ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr "¿àÞØ×ÒÞòÐç, ÜÞÔÕÛ Ø ÔàÐøÒÕà èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr "¿àÞØ×ÞòÐç Ø ÜÞÔÕÛ èâÐÜßÐçÐ"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr "¿ÞÔÕáØ ÞÒÐø èâÐÜßÐç ÚÐÞ default"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "´ÞÔÐø ÞÒÐø èâÐÜßÐç ã Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "ÃÚÛÞÝØ ÞÒÐø èâÐÜßÐç Ø× Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-msgid "Print test pages"
-msgstr "¸èâÐÜßÐø âÕáâ áâàÐÝØæÕ"
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-msgid "Know how to use this printer"
-msgstr "´Ð ÛØ ×ÝÐâÕ ÚÐÚÞ ÔÐ ÚÞàØáâØâÕ ÞÒÐø èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-msgid "Remove printer"
-msgstr "ÃÚÛÞÝØ èâÐÜßaç"
-
-#: ../../printerdrake.pm_.c:2789
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "ÃÚÛÐúÐÜ áâÐàØ èâÐÜßÐç \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2813
-msgid "Default printer"
-msgstr "Default èâÐÜßÐç"
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "ÈâÐÜßÐç  \"%s\" øÕ áÐÔÐ ßÞáâÐÒùÕÝ ÚÐÞ default èâÐÜßÐç."
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "´ÞÔÐøÕÜ èâÐÜßÐç ã Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "ÈâÐÜßÐç \"%s\" øÕ ãáßÕèÝÞ ÔÞÔÐÝ ã Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "½ÕãáßÕÛÞ ÔÞÔÐÒÐúÕ èâÐÜßÐçÐ \"%s\" ã Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "ÃÚÛÐúÐúÕ èâÐÜßÐçÐ Ø× Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "ÈâÐÜßÐç \"%s\" øÕ ãáßÕèÝÞ ãÚÛÞúÕÝ Ø× Star Office/OpenOffice.org-Ð"
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"½ÕÞáßÕÞ ßÞÚãèÐø ãÚÛÐúÐúÐ èâÐÜßÐçÐ \"%s\" Ø× Star Office/OpenOffice.org-Ð"
-
-#: ../../printerdrake.pm_.c:2839
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "´Ð ÛØ åÞûÕâÕ ÔÐ ãÚÛÞÝØâÕ èâÐÜßÐç \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2841
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "ÃÚÛÐúÐÜ èâÐÜßÐç \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "¿ÞÔeèÐÒaúÕ ßàÞÚáØja"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"´ÞÑàÞÔÞèÛØ ã ÐÛÐâ ×Ð ÚÞÝäØÓãàÐæØøã proxy-øÐ.\n"
-"\n"
-"¾ÒÔÕ ÜÞÖÕâÕ ÔÐ ßÞÔÕáØâÕ ÒÐèÕ http Ø ftp ßàÞÚáØøÕ\n"
-"áÐ ØÛØ ÑÕ× ÚÞàØáÝØçÚÞÓ ØÜÕÝÐ Ø ÛÞ×ØÝÚÕ\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"¼ÞÛØÜ ²Ðá ÔÐ ãÝÕáÕâÕ http proxy ØÝäÞàÜÐæØøÕ\n"
-"¾áâÐÒØâÕ ßÞùÐ ßàÐ×ÝØÜÐ ãÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâÕâØâÕ ßàÞÚáØ"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "¿Þàâ"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url âàÕÑÐ ÔÐ ßÞçØúÕ áÐ http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "±àÞj ßÞàâÐ ÑØ âàÕÑÐÞ ÔÐ ÑãÔÕ ÝãÜÕàØçÚÐ Þ×ÝÐÚÐ (ÑàÞø)"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"¼ÞÛØÜ ²Ðá ÔÐ ãÝÕáÕâÕ ØÝäÞàÜÐæØøÕ Þ ftp proxy-øã\n"
-"¿ÞùÐ ÞáâÐÒØâÕ ßàÐ×ÝØÜÐ ãÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ftp ßàÞÚáØ"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url âàÕÑÐ ÔÐ ßÞçØúÕ áÐ 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"ÃÝÕáØâÕ proxy ÚÞàØáÝØçÚÞ ØÜÕ Ø ÛÞ×ØÝÚã, ãÚÞÛØÚÞ ßÞáâÞøÕ.\n"
-"¿ÞùÐ ÞáâÐÒØâÕ ßÐ×ÝØÜÐ ãÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ ÚÞàØáÝØçÚÞ ØÜÕ/ÛÞ×ØÝÚã"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "ÛÞÓÞÒaúe"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ÛÞ×ØÝÚÐ"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ßÞÜÞÒÞ ãÝÕáØâÕ ÛÞ×ØÝÚÕ"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "½ÕßÞÔãÔÐàÝÞáâ ÛÞ×ØÝÚØ. ¿àÞÑÐøâÕ ßÞÝÞÒÞ!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "½ØøÕ ÜÞÓãûÕ ÔÞÔÐâØ ßÐàâØæØøã ÝÐ _äÞàÜÐâØàÐÝ_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "½ØøÕ ÜÞÓãû ãÝÞá ã äÐøÛ %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ÝÕãáßÕÛÞ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ÝÕãáßÕÛÞ (ÜÞÖÔÐ ÝÕÔÞáâÐjÕ raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "½ÕÜÐ ÔÞÒÞùÝÞ ßÐàâØæØøÐ ×Ð RAID ÝØÒÞ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ÁâÐàâÐÜ ALSA (Advanced Linux Sound Architecture) áØáâÕÜ ×Ð ×ÒãÚ"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron -  ßÞÔÕáØâÕ ßÕàØÞÔ.ÚÞÜÐÝÔe"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd áÕ ÚÞàØáâØ ×Ð ßàaûeúÕ áâÐâãáÐ ÑÐâÕàØje Ø ÛÞÓÞÒaúÕ ßàÕÚÞ syslog.\n"
-"ºÞàØáâØ áÕ Ø ×Ð ÓaèeúÕ ÜaèØÝÕ (àÐÔØ Ø ÝÐ ÔÕáÚâÞß ÜaèØÝÐÜa) ÚÐÔÐ je ÑÐâÕàØjÐ "
-"áÛÐÑÐ"
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"¿ÞÚàeûÕ ÚÞÜÐÝÔÕ ×ÐÚÐ×ÐÝÕ at ÚÞÜÐÝÔÞÜ,ÚÐÞ Ø  batch  ÚÞÜÐÝÔÕ ÚÐÞ jÕ "
-"ÞßâÕàeûÕÝÞáâ\n"
-"áØáâÕÜÐ ÜÐÛa."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron jÕ áâÐÝÔÐàÔÝØ UNIX ßàÞÓàÐÜ ÚÞjØ ßÞÚàeûÕ ÚÞàØáÝØçÚÕ ßàÞÓàÐÜÕ\n"
-"ßàÕàØÞÔØçÝÞ ã ×ÐÚÐ×ÐÝÞ ÒàÕÜÕ. vixie cron  ÔÞÔÐjÕ ÞßæØjÕ ßàÞáâÞÜ UNIX cron,"
-"ãÚùãçãjãûØ ÑÞùã  áØÓãàÝÞáâ Ø ÑÞùã ßÞÔÕáØÒÞáâ."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ÔÐjÕ ßÞÔàèÚã ×Ð ÜØèÐ ×Ð âÕÚáãÛÐÝÞ-ÑÐ×ØàÐÝÕ ÐßÛØÚÐæØjÕ ÚÐÞ èâÞ jÕ\n"
-"Midnight Commander.¸áâÞ âÐÚÞ ÔÐjÕ ßÞÔàèÚã ×Ð  pop-up ÜÕÝØje ÝÐ  ÚÞÝ×ÞÛØ."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake áâÐàâÐ ØáßØâØÒÐúÕ åÐàÕÔÒÕàÐ, Ø ßÞ ßÞâàÕÑØ òÕ ßÞÔÕáØâØ \n"
-"ÝÞÒØ/Ø×ÜÕúÕÝØ åÐàÔÒÕà."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache jÕ  WWW áÕàÒÕà. ¾Ý áÕ ÚÞàØáâØ ÔÐ ÞßáÛãÖãjÕ  HTML äÐjÛÞÒÕ\n"
-"Ø CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"¸ÝâÕàÕÝâ áãßÕà áÕàÒÕà ÔÕÜÞÝ (×ÝÐÝ ÚÐÞ netd) áâÐàâÐ \n"
-"àÐ×ÝÕ ØÝâÕàÝÕâ áÕàÒØáÕ.¾Ý jÕ ÞÔÓÞÒÞàÐÝ ×Ð ßÞÚàÕâaúÕ ÜÝÞÓØx áÕàÒØáÐ ÚÐÞ Ýßà. "
-"elnet, ftp, rsh, Ø  rlogin.¸áÚùãçãjãûØ úÕÓÐ, ØáÚùãçãjÕâÕ Ø áÕàÒØáÕ \n"
-"×Ð ÚÞjÕ jÕ ÞÝ ÞÔÓÞÒÞàÐÝ."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"¿ÞÚàÕÝØâÕ äØÛâàØàÐúÕ ßÐÚÕâÐ ×Ð Linux ÚÕàÝÕÛ áÕàØøÕ 2.2, ÔÐ ÑØ ßÞÔÕáØÛØ\n"
-"firewall àÐÔØ ×ÐèâØâÕ ÒÐèÕ ÜÐèØÝÕ ÞÔ ÜàÕÖÝØå ÝÐßÐÔÐ."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"¾ÒÐj ßÐÚÕâ ÐÚâØÒØàÐ ÞÔÐÑàÐÝã ÜÐßã âÐáâÐâãàÕ ÚÐÚÞ jÕ ßÞÔeèÕÝÞ \n"
-"ã  /etc/sysconfig/keyboard.¾ÒÞ áÕ ßÞÔeèÐÒÐ ÚÞàØáâeûØ kbdconfig ÐÛÐâÚã.\n"
-"ÂàÕÑÐ ÔÐ ÑãÔÕ ãÚùãçÕÝ ÝÐ ÒeûØÝã ÜaèØÝa."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"°ãâÞÜÐâáÚÐ àÕÓÕÝÕàÐæØøÐ ÚÕàÝÕÛÞÒÞÓ ×ÐÓÛÐÒùÐ ã /boot ×Ðr\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "°ãâÞÜÐâáÚÐ ÔÕâÕÚæØøÐ Ø ÚÞÝäØÓãàÐæØøÐ åÐàÔÒÕàÐ ßàØ áâÐàâÐúã áØáâÕÜÐ."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf òÕ ßÞÝÕÚÐÔ Ø×ÒÞÔØâØ àÐ×ÝÕ ×ÐÔÐâÚÕ âÞÚÞÜ\n"
-"áâÐàâÐúÐ áØáâÕÜÐ àÐÔØ ÞÔàÖÐÒÐúÐ Ø ßÞÔÕèÐÒÐúÐ áØáâÕÜÐ."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd jÕ print ÔÕÜÞÝ ßÞâàÕÑÐÝ  ÔÐ ÑØ lpr àÐÔØÞ ÔÞÑàÞ.ÂÞ jÕ \n"
-"ã ÞáÝÞÒØ áÕàÒÕà ÚÞjØ ÐàÑØâàØàÐ  print ßÞáÛÞÒÕ èâÐÜßÐçã(ØÜÐ)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-ÞÒ ²ØàâãÕÛÝØ ÁÕàÒÕà, ÚÞàØáâØ áÕ ×Ð Ø×ÓàÐÔúã Ñà×ÞÓ Ø ÔÞáâãßÝÞÓ\n"
-"áÕàÒÕàÐ."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"½Ð×ÒÐÝ ÚÐÞ (BIND) jÕ Domain Name Server (DNS) ÚÞjØ áÕ ÚÞàØáâØ ×Ð ÔÐje host "
-"ØÜÕ IP ÐÔàÕáØ."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"¼ÞÝâØàaúÕ Ø ÔÕÜÞÝâØàaúÕ áÒØå ¼àeÖÝØå äÐjÛ áØáâÕÜa(NFS), SMB (Lan\n"
-"Manager/Windows), Ø  NCP (NetWare) âaçÐÚÐ ÜÞÝâØàaúa. "
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"°ÚâØÒØàaúÕ Ø ÔÕÐÚâØÒØàaúÕ áÒØå ÜàeÖÝØå ØÝâÕàäÕjáÐ ÚÞÝäØÓãàØáÐÝØå ×Ð áâÐàâ \n"
-"ßàØ ßÞÔØ×aúã áØáâÕÜÐ."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS jÕ ßÞßãÛÐàÝØ ßàÞâÞÚÞÛ ×Ð àÐ×ÜÕÝã  äÐjÛÞÒa ßàÕÚÞ TCP/IP ÜàeÖÐ.\n"
-"¾ÒÐj áÕàÒØá ÞÜÞÓãûÐÒÐ äãÝÚæØÞÝÐÛÝÞáâ NFS áÕàÒÕàÐ,ÚÞjØ áÕ ÚÞÝäØÓãàØèÕ ßàÕÚÞ \n"
-"/etc/exports ÔÐâÞâÕÚe."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS jÕ ßÞßãÛÐàÝØ ßàÞâÞÚÞÛ ×Ð àÐ×ÜÕÝã  äÐjÛÞÒa ßàÕÚÞ TCP/IP ÜàeÖÐ.\n"
-"¾ÒÐj áÕàÒØá ÞÜÞÓãûÐÒÐ äãÝÚæØÞÝÐÛÝÞáâ NFS  file locking äãÝÚæØjÕ"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"°ãâÞÜÐâáÚØ ãÚùãçãøÕ numlock âÐáâÕà ßÞÔ ÚÞÝ×ÞÛÞÜ\n"
-"Ø ã XFree ßàØ áâÐàâÐúã."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "¿ÞÔàèÚÐ ×Ð OKI 4w Ø ÚÞÜßÐâØÑØÛÝÕ Üã  win èâÐÜßÐçÕ."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ßÞÔàèÚÐ  áÕ ÞÑØçÝÞ ÚÞàØáâØ ×Ð  ÕâÕàÝÕâ Ø ÜÞÔÕÜÕ ã ÛÐßâÞßÞÒØÜÐ.\n"
-"½ÕûÕ áÕ ßÞÚàÕÝãâØ ãÚÞÛØÚÞ ÝØjÕ ÚÞÝäØÓãàØáÐÝ âÐÚÞ ÔÐjÕ ÑÕ×ÑÕÔÝÞ ØÝáâÐÛØàÐÝ \n"
-"ÝÐ áØáâÕÜã ÚÞÜ ÝØjÕ ßÞâàÕÑÐÝ."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"¿ÞàâÜÐßÕà ãàÐÒùÐ  RPC ÚÞÝÕÚæØjÐÜa,ÚÞjÕ ÚÞàØáâÕ\n"
-"ßàÞâÞÚÞÛØ ÚÐÞ NFS Ø  NIS.¿ÞàâÜÐß áÕàÒÕà ÜÞàÐ ÑØâØ ßÞÚàÕÝãâ ÝÐ ÜaèØÝÐÜa\n"
-"ÚÞjÕ àÐÔÕ ÚÐÞ áÕàÒÕàØ ×Ð ßàÞâÞÚÞÛÕ ÚÞjØ ÚÞàØáâÕ RPC ÜÕåÐÝØ×ÐÜ."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix jÕ  Mail Transport Agent,ÚÞjØ ã áâÒÐàØßàÕÜeèâÐ ßÞèâã áÐ jÕÔÝÕ ÜaèØÝÕ "
-"ÝÐ ÔàãÓã."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"çãÒÐ Ø ÞÑÝÐÒùÐ áØáâÕÜáÚØ  entropy pool ×Ð ÒÕûØ ÚÒÐÛØâÕâ ÓÕÝÕàØáaúe\n"
-"áÛãçÐjÝØå ÑàÞjÕÒa."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"´ÞÔÕùãøÕ raw ãàÕûÐøÕ ×Ð ÑÛÞÚ ãàÕûÐøÕ (ÚÐÞ èâÞ áã åÐàÔ ÔØáÚ\n"
-"ßÐàâØæØøÕ), èâÞ ÜÞòÕ ÑØâØ ÚÞàØáÝÞ ×Ð ÐßÛØÚÐæØøÕ ÚÐÞ èâÞ øÕ Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed ÔÕÜÞÝ ÔÞ×ÒÞùÐÒÐ ÐãâÞÜÐâáÚÞ IP àãâeà update-ÞÒaúÕ ßàÕÚÞ\n"
-"RIP ßàÞâÞÚÞÛÐ.´ÞÚ áe RIP ÔÞáâÐ ÚÞàØáØâØ ÝÐ ÜÐÛØÜ ÜàeÖÐÜÐ,ÚÞÜßÛÕÚáÝØjØ \n"
-" routing ßàÞâÞÚÞÛØ áã ßÞâàÕÑÝØ ×Ð ÚÞÜßÛÕÚáÝÕ ÜàeÖÕ."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ßàÞâÞÚÞÛ ÔÞ×ÒÞùÐÒÐ ÚÞàØáÝØæØÜÐ ÝÐ ÜàeÖØ ÔÐ ÞÜÞÓãûe\n"
-"ÜeàeúÕ ßÕàäÞàÜÐÝáØ ×Ð ÑØÛÞ ÚÞjã ÜaèØÝã ÝÐ âÞj  ÜàeÖØ."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ßàÞâÞÚÞÛ ÞÜÞÓãûÐÒÐ ÚÞàØáÝØæØÜÐ ÝÐ ÜàeÖØ ÔÐ ÞâÚàØjã ÚÞ je\n"
-"ãÛÞÓÞÒÐÝ ÝÐ ÔàãÓØÜ ÜaèØÝÐÜÐ."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ßàÞâÞÚÞÛ ÔÞ×ÒÞùÐÒÐ ãÔaùÕÝØÜ ÚÞàØáÝØæØÜÐ ÔÐ ÔÞÑØjã ÛØáâã áÒØå\n"
-"ÚÞàØáÝØÚÐ ãÛÞÓÞÒÐÝØå ÝÐ áØáâÕÜ áÐ ßÞÚàÕÝãâØÜ rwho ÔÕÜÞÝÞÜ (áÛØçÝÞ finger-ã)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "¿ÞÚàÕûÕ áØáâÕÜ ×Ð ×ÒãÚ ÝÐ ÒÐèÞø ÜÐèØÝØ"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog jÕ ÞÑjÕÚÐâ ßÞÜÞûã ÚÞÓ ÜÝÞÓØ ÔÕÜÞÝØ ÚÞàØáâÕ ×Ð ÛÞÓÞÒaúÕ ßÞàãÚa\n"
-"ã àÐ×ÝØÜ áØáâÕÜáÚØÜ ÛÞÓ äÐjÛÞÒØÜa. ´ÞÑàÐ je ØÔÕøÐ ØÜaâØ ãÒÕÚ ßÞÚàÕÝãâ syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "¿ÞÔØÖÕ ÔàÐøÒÕàÕ ×Ð ÒÐèÕ usb ãàÕòÐøÕ."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "¿ÞÚàeûÕ X ÄÞÝâ áÕàÒÕà (ßÞâàÕÑÝÞ ×Ð ßÞÚàÕâÐúÕ XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "¸×ÐÑÕàØâÕ ÚÞøÕ áÕàÒØáØ âàÕÑÐ ÐãâÞÜÐâáÚØ ÔÐ áÕ ßÞÚàÕÝã ßàØ áâÐàâÐúã"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "ÈâÐÜßÐúÕ"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "¸ÝâÕàÝÕâ"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "·ÐøÕÔÝØçÚÞ ÔÕùÕúÕ äÐøÛÞÒÐ"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-msgid "System"
-msgstr "ÁØáâÕÜ"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "ÃÔÐùÕÝÐ ÐÔÜØÝØáâàÐæØøÐ"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "ÁÕàÒÕà ±Ð×Õ ßÞÔÐâÐÚa"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "ÁÕàÒØáØ: %d ÐÚâØÒØàÐÝØå ×Ð %d àÕÓØáâàÞÒÐÝØå"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "ÁÕàÒØáØ"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ßÞÚàÕÝãâÞ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "×ÐãáâÐÒùÕÝÞ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "ÁÕàÒØáØ Ø ÔÕÜÞÝØ"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"ÖÐÛØÜ ÐÛØ ÝÕÜa ÔÞÔÐâÝØå ØÝäÞàÜÐæØja\n"
-"Þ ÞÒÞÜ áÕàÒØáã."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "¿àØ áâÐàâaúã"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "ÁâÐàâ"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "ÁâÞß"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "¿àÞâÞÚÞÛ ×Ð áâÐâÐÚ áÒÕâa"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "¸ÝâÕàÝÕâ ßàØáâãß"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "¼ãÛâØÜÕÔØja - ³àÐäØÚa"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "ÀÐ×ÒÞøÝÐ"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "ºÞÝâàÞÛÝØ ÆÕÝâÐà"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "¼àeÖÝØ ØÝâÕàäejá"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB áÕàÒÕà  host:"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "¸Óàe"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "µÚáßÕàâ"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-#, fuzzy
-msgid "MandrakeConsulting"
-msgstr "Mandrake °ÛÐâØ ×Ð ÞÑøÐèúÕúÐ"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "¸ÝáâÐÛØàÐÜ ßÐÚÕâÕ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"½Õ ÜÞÓã ßàÞçØâÐâØ âÐÑÕÛã ßÐàâØæØøÐ, ÜÝÞÓÞ øÕ ØáÚÒÐàÕÝÐ ×Ð ÜÕÝÕ :(\n"
-"¿ÞÚãèÐûã ÔÐùÕ ×ÐÞÑØÛÐ×ÕûØ ÛÞèÕ ßÐàâØæØøÕ"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "³àÕèÚÐ!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "½Õ ÜÞÓã ÔÐ ßàÞÝÐòÕÜ ßÞâàÕÑÝØ image äÐøÛ `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "°ãâÞØÝáâÐÛÐæØÞÝØ ÚÞÝäØÓãàÐâÞà"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"ÁÐÔÐ âàÕÑÐ ÔÐ ßÞÔÕáØâÕ °ãâÞØÝáâÐÛÐæØÞÝã ´ØáÚÕâã. ¾ÒÐ ÞßæØøÕ øÕ ÔÞÝÕÚÛÕ "
-"ØÞßÐáÝÐ Ø ÜÞàÐ áÕ ßÐÖùØÒÞ ÚÞàØáâØâØ.\n"
-"\n"
-"ÁÐ ÞÒÞÜ ÞßæØøÞÜ, ÜÞûØ ûÕâÕ ÔÐ ßÞÝÞÒØâÕ ØÝáâÐÛÐæØøã ÚÞøã áâÕØ×ÒÕÛØ ÝÐ ÞÒÞÜ "
-"àÐçãÝÐàã, áÐ ßÞÒàÕÜÕÝØÜ ãßØâØÜÐ ã æØùã Ø×ÜÕÝÕ ÞÔàÕòÕÝØå ÒàÕÔÝÞáâØ "
-"ßÐàÐÜÕâàÐ.\n"
-"\n"
-"À°ÔØ ÜÐÚáØÜÐÛÝÕ áØÓãàÝÞáâØ, ßÐàâØæØÞÝØàÐúÕ Ø äÞàÜÐâØàÐúÕ ÝØÚÐÔÐ ÝÕûÕ ÑØâØ "
-"Ø×ÒÞòÕÝÞ ÐãâÞÜÐâáÚØy, ÑÕ× ÞÑ×ØàÐ èâÐ Ø×ÐÑàÐÛØ âÞÚÞÜ ØÝáâÐÛÐæØøÕ ÝÐ ÞÒÞÜ "
-"àÐçãÝÐàã.\n"
-"\n"
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ÝÐáâÐÒØâÕ?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÐãâÞÜÐâØ×ÞÒÐÝØå ÚÞàÐÚÐ"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Ø×ÐÑÕàØâÕ ×Ð áÒÐÚØ ÚÞàÐÚ ÔÐ ÛØ ûÕ ÑØâØ ØáâÞÒÕâÐÝ Ø ÐãâÞÜÐâØ×ÞÒÐÝ ØÛØûÕ ÑØâØ "
-"àãçÝÞ ßÞÔÕèÐÒÐÝ"
-
-#: ../../standalone/drakautoinst_.c:83
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "ºàÕØàÐÜ ÐãâÞ ØÝáâÐÛÐæØÞÝØ äÛÞßØ"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"´ÞÑÞàÞÔÞèÛØ.\n"
-"\n"
-"¿ÐàÐÜÕâàØ ×Ð ÐãâÞØÝáâÐÛÐæØøã áã ÔÞáâãßÝØ ã ÔÕÛã ÚÞøØ áÕ ÝÐÛÐ×Ø ÛÕÒÞ"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "ÇÕáâØâÐÜÞ !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"´ØáÚÕâÐ øÕ ãáßÕèÝÞ ÚàÕØàÐÝÐ.\n"
-"ÁÐÔÐ ÜÞÖÕâÕ ßÞÝÞÒØâØ ÒÐèã ØÝáâÐÛÐæØøã."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "°ãâÞØÝáâÐÛÐæØøÐ"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "´ÞÔÐø ÒàÕÔÝÞáâ"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "ÃÚÛÞÝØ ×ÐÔúã ÒàÕÔÝÞáâ"
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup ¸×ÒÕèâÐø \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon ¸×ÒÕèâÐø\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup ´ÕâÐùØ ¸×ÒÕèâÐøÐ\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr "ãÚãßÐÝ ÝÐßàÕÔÐÚ"
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr "Backup áØáâÕÜáÚØå äÐøÛÞÒÐ..."
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-msgid "Hard Disk Backup files..."
-msgstr "backup-ÞÒÐúÕ äÐøÛÞÒÐ áÐ åÐàÔ ÔØáÚÐ..."
-
-#: ../../standalone/drakbackup_.c:604
-msgid "Backup User files..."
-msgstr "backup-ÞÒÐúÕ ÚÞàáØÝØÚÞÒØå äÐøÛÞÒÐ"
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr "½ÐßàÕÔÐÚ Backup-ÞÒÐúÐ åÐàÔ ÔØáÚÐ..."
-
-#: ../../standalone/drakbackup_.c:655
-msgid "Backup Other files..."
-msgstr "backup-ÞÒÐúÕ ÞáâÐÛØå äÐøÛÞÒÐ..."
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"ÛØáâÐ äÐøÛÞÒÐ ßÞáÛÐÝÐ ßàÕÚÞ FTP-Ð : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) ¿àÞÑÛÕÜØ áÐ FTP ÚÞÝÕÚæØøÞÜ: ½ØøÕ ÜÞÓãûÕ ßÞáÛÐâØ ÒÐèÕ backup äÐøÛÞÒÕ "
-"ßàÕÚÞ FTP.\n"
-
-#: ../../standalone/drakbackup_.c:676
-#, fuzzy
-msgid " Error during mail sending. \n"
-msgstr "(!) ³àÕèÚÐ âÞÚÞÜ áÛÐúÐ mail-Ð. \n"
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-msgid "File Selection"
-msgstr "¾ÔÐÑØà äÐøÛÞÒÐ"
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr "¾ÔÐÑÕàØâÕ äÐøÛÞÒÕ ØÛØ ÔØàÕÚâÞàØøãÜÕ Ø ÚÛØÝØâÕ ÝÐ '´ÞÔÐø'"
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"¿àÞÒÕàØâÕ áÒÕ ÞßæØøÕ ÚÞøÕ ÒÐÜ âàÕÑÐøã.\n"
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"¾ÒÕ ÞßæØøÕ ÜÞÓã áÐçãÒÐâØ Ø ÚÐáÝØøÕ ÞÑÝÞÒØâØ áÒÕ äÐøÛÞÒÕ ã ÒÐèÕÜ /etc "
-"ÔØàÕÚâÞàØøãÜã.\n"
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr "ÁÐçãÒÐøâÕ áÒÞøÕ ÁØáâÕÜáÚÕ äÐøÛÞÒÕ ( /etc ÔØàÕÚâÞàØøãÜ )"
-
-#: ../../standalone/drakbackup_.c:782
-#, fuzzy
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-"ºÞàØáâØ ¸ÝÚàÕÜÕÝâÐÛÝØ Backup-ÞÒÕ  (ÝÕ ×ÐÜÕúãø Øå áÐ áâÐàØÜ backup-ÞÒØÜÐ)"
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "½Õ ãÚùãçãø ÚàØâØçÝÕ äÐøÛÞÒÕ (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"ÁÐ ÞÒÞÜ ÞßæØøÞÜ ÜÞûØ ûÕâÕ ÔÐ ÞÑÝÞÒØâÕ ÑØÛÞ ÚÞøã ÒÕà×Øøã\n"
-" ÒÐèÕÓ /etc ÔØàÕÚâÞàØøãÜÐ."
-
-#: ../../standalone/drakbackup_.c:801
-msgid "Please check all users that you want to include in your backup."
-msgstr "ÁÕÛÕÚâãøâÕ áÒÕ ÚÞàØáÝØÚÕ ÚÞøÕ ÖÕÛØâÕ ÔÐ ãÚùãçØâÕ ã backup."
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr "½Õ ãÚùãçãø ÚÕè ßàÕâàÐÖØÒÐçÐ"
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-"ºÞàØáâØ ¸ÝÚàÕÜÕÝâÐÛÝØ Backup-ÞÒÕ  (ÝÕ ×ÐÜÕúãø Øå áÐ áâÐàØÜ backup-ÞÒØÜÐ)"
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-msgid "Remove Selected"
-msgstr "ÃÚÛÞÝØ ÁÕÛÕÚâÞÒÐÝÞ"
-
-#: ../../standalone/drakbackup_.c:889
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:928
-msgid "Users"
-msgstr "ºÞàØáÝØæØ"
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr "ºÞàØáØâØ Use FTP connection to backup"
-
-#: ../../standalone/drakbackup_.c:957
-msgid "Please enter the host name or IP."
-msgstr "¼ÞÛØÜ ²Ðá ãÝÕáÕâÕ ØÜÕ åÞáâÐ ØÛØ IP."
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"ÃÝÕáØâÕ ÔØàÕÚâÞàØøãÜ ÔÐ ÑØ\n"
-" áâÐÒØÛØ backup ÝÐ ÞÒÐø åÞáâ."
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter your login"
-msgstr "ÃÝÕáØâÕ ÒÐèÕ ÚÞàØáÝØçÚÞ ØÜÕ"
-
-#: ../../standalone/drakbackup_.c:972
-msgid "Please enter your password"
-msgstr "ÃÝÕáØâÕ ÒÐèã ÛÞ×ØÝÚã"
-
-#: ../../standalone/drakbackup_.c:978
-msgid "Remember this password"
-msgstr "·ÐßÐÜâØ ÞÒã ÛÞ×ØÝÚã"
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-msgid "FTP Connection"
-msgstr "FTP ÚÞÝÕÚæØja"
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-msgid "Secure Connection"
-msgstr "ÁØÓãàÝÞáÝÐ ºÞÝÕÚæØøÐ"
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr "ºÞàØáâØ CD/DVDROM ×Ð backup"
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-msgid "Please choose your CD space"
-msgstr "¸×ÐÑÕàØâÕ ÒÐè CD ßàÞáâÞà"
-
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-msgid "Please check if you are using CDRW media"
-msgstr "¿àÞÒÕàØâÕ ÔÐ ÛØ ÚÞàØáâØâÕ CDRW ÜÕÔØø"
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr "¿àÞÒÕàØâÕ ÔÐ ÛØ ÖÕÛØâÕ Ø×ÑàØèÕâÕ ÒÐè CDRW ßàÕ"
-
-#: ../../standalone/drakbackup_.c:1096
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"¿àÞÒÕàØâÕ ÔÐ ÛØ ÖÕÛØâÕ ÔÐ ãÚùãçØâÕ\n"
-" install boot ÝÐ ÒÐè CD."
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"ÃÝÕáØâÕ ØÜÕ ÒÐèÕÓ CD Writer ãàÕòÐøÐ\n"
-" ex: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1143
-msgid "Use tape to backup"
-msgstr "ºÞàØáâØ âàÐÚã ×Ð backup"
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr "ÃÝÕáØâÕ ØÜÕ ãàÕòÐøÐ ÚÞøØ ÚÞàØáâØâÕ ×Ð backup"
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"ÃÝÕáØâÕ ÜÐÚáØÜÐÛÝã ÒÕÛØçØÝã\n"
-" ÔÞ×ÒÞùÕÝã ×Ð Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-msgid "Please enter the directory to save:"
-msgstr "ÃÝÕáØâÕ ÔØàÕÚâÞàØøãÜ ÔÐ ÑØ áÐçãÒÐÛØ:"
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-msgid "Use quota for backup files."
-msgstr "ºÞàØáâØ quota ×Ðr backup äÐøÛÞÒÕ"
-
-#: ../../standalone/drakbackup_.c:1257
-msgid "Network"
-msgstr "¼àÕÖÐ"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr "ÝÐ áÐâ"
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr "ÔÝÕÒÝÞ"
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr "ÝÕÔÕùÝÞ"
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr "ÜÕáÕçÝÞ"
-
-#: ../../standalone/drakbackup_.c:1302
-msgid "Use daemon"
-msgstr "ºÞàØáâØ ÔÕÜÞÝ"
-
-#: ../../standalone/drakbackup_.c:1307
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"¸×ÐÑÕàØâÕ ÒàÕÜÕÝáÚØ ØÝâÕàÒÐÛ \n"
-"Ø×ÜÕòã áÒÐÚÞÓ backup-Ð"
-
-#: ../../standalone/drakbackup_.c:1313
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"¸×ÐÑÕàØâÕ\n"
-"ÜÕÔØø ×Ð backup."
-
-#: ../../standalone/drakbackup_.c:1317
-msgid "Use Hard Drive with daemon"
-msgstr "ºÞàØáâØ åÐàÔ ÔØáÚ áÐ ÔÕÜÞÝÞÜ"
-
-#: ../../standalone/drakbackup_.c:1319
-msgid "Use FTP with daemon"
-msgstr "ºÞàØáâØ FTP áÐ ÔÕÜÞÝÞÜ"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "¿àÞÒÕàØâÕ ÔÐ ÛØ øÕ cron ÔÕÜÞÝ ãÚùãçÕÝ ã ÒÐèÕ áÕàÒØáÕ."
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr "¿ÞèÐùØ mail Ø×ÒÕèâÐø ÝÐÚÞÝ áÒÐÚÞÓ backup/Ð ÝÐ :"
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr "ÈâÐ"
-
-#: ../../standalone/drakbackup_.c:1406
-msgid "Where"
-msgstr "³ÔÕ"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "When"
-msgstr "ºÐÔÐ"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "More Options"
-msgstr "²ØèÕ ¾ßæØøÐ"
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup ºÞÝäØÓãàÐæØøÐ"
-
-#: ../../standalone/drakbackup_.c:1453
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "¸×ÐÑÕàØâÕ èâÐ ÖÕÛØâÕ ÔÐ backup-ãøÕâÕ"
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr "ÝÐ ÅÐàÔ ´ØáÚ"
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr "ßàÕÚÞ ¼àÕÖÕ"
-
-#: ../../standalone/drakbackup_.c:1530
-msgid "Please choose what you want to backup"
-msgstr "¸×ÐÑÕàØâÕ èâÐ ÖÕÛØâÕ ÔÐ backup-ãøÕâÕ"
-
-#: ../../standalone/drakbackup_.c:1531
-msgid "Backup system"
-msgstr "Backup-ãø áØáâÕÜ"
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr "Backup-ãø ºÞàØáÝØÚÕ"
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr "¸×ÐÑÕàØâÕ ÚÞàØáÝØÚÕ àãçÝÞ"
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Backup ¸×ÒÞàØ: \n"
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- ÁØáâÕÜáÚØ äÐøÛÞÒØ:\n"
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- ºÞàØáÝØçÚØ äÐøÛÞÒØ:\n"
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ¾áâÐÛØ äÐøÛÞÒØ:\n"
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- ÁÝØÜØ ÝÐ ÅÐàÔ ´ØáÚ ÝÐ ßãâÐúã : %s\n"
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- ÁÝØÜØ ÝÐ FTP ØÛØ åÞáâ : %s\n"
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t ÚÞàØáÝØçÚÞ ØÜÕ: %s\n"
-"\t\t ÝÐ ßãâÐúØ: %s \n"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- OßæØøÕ:\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr "\t½Õ ãÚùãçãø ÁØáâÕÜáÚÕ ÄÐøÛÞÒÕ\n"
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackup ÚÞàØáâØ tar Ø bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackus ÚÞàØáâØ tar Ø gzip\n"
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- ´ÕÜÞÝn (%s) ãÚùãçãøÕ :\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr "\t-ÅÐàÔ ÔØáÚ.\n"
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr "\t-¼àÕÖÐ ßàÕÚÞ FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr "\t-¼àÕÖÐ ßàÕÚÞ SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "±Õ× ÚÞÝäØÓãàÐæØøÕ, ÚÛØÚÝØâÕ ÝÐ ÇÐàÞÑúÐÚ ØÛØ ½ÐßàÕÔÝÞ\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"»ØáâÐ ßÞÔÐâÐÚÐ ×Ð ÞÑÝÐÒùÐúÕ:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"»ØáâÐ ÚÞàãÜßØàÐÝØå ßÞÔÐâÐÚÐ:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1745
-msgid "Please uncheck or remove it on next time."
-msgstr "´ÕáÕÛÕÚâãøâÕ ØÛØ ãÚÛÞÝØâÕ Øå áÛÕÔÕûØ ßãâ."
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr "Backup äÐøÛÞÒØ áã ÚÞàãÜßØàÐÝØ"
-
-#: ../../standalone/drakbackup_.c:1776
-msgid "          All your selectionned data have been          "
-msgstr "          ÁÒØ ÒÐèØ áÕÛÕÚâÞÒÐÝØ ßÞÔÐáØ áã          "
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          ÃáßÕèÝÞ ¾ÑÝÞÒùÕÝØ ÝÐ %s       "
-
-#: ../../standalone/drakbackup_.c:1876
-msgid "         Restore Configuration       "
-msgstr "        ¾ÑÝÐÒùÐúÕ ºÞÝäØÓãàÐæØøÕ         "
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr "à ÀÕÔã ×Ð ÞÑÝÐÒÐúÕ ÔàãÓØå äÐøÛÞÒÐ."
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"¾ÑÝÐÒùÐúÕ ÛØáâÕ ÚÞàØáÝØÚÐ (áÐÜÞ ÝÐøÝÞÒØøØ ßÞÔÐæØ ßÞ ÚÞàØáÝØÚã áã ÒÐÖÝØ)"
-
-#: ../../standalone/drakbackup_.c:1962
-msgid "Backup the system files before:"
-msgstr "Backup áØáâÕÜáÚØå äÐøÛÞÒÐ ßàÕ:"
-
-#: ../../standalone/drakbackup_.c:1964
-msgid "please choose the date to restore"
-msgstr "Ø×ÐÑÕàØâÕ ÔÐâãÜ ×Ð ÞÑÝÐÒùÐúÕ"
-
-#: ../../standalone/drakbackup_.c:1992
-msgid "Use Hard Disk to backup"
-msgstr "ºÞàØáâØ ÅÐàÔ ´ØáÚ ×Ð backup"
-
-#: ../../standalone/drakbackup_.c:2073
-msgid "Restore from Hard Disk."
-msgstr "¿ÞÒàÐâØ (restore) áÐ ÅÐàÔ ´ØáÚÐ"
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr "ÃÝÕáØâÕ ÔØàÕÚâÞàØøãÜ ÓÔÕ øÕ áÜÕèâÕÝ backup"
-
-#: ../../standalone/drakbackup_.c:2133
-msgid "Select another media to restore from"
-msgstr "¸×ÐÑÕàØâeÔàãÓØ ÜÕÔØø ×Ð ÞÑÝÐÒùÐúÕ áÐ"
-
-#: ../../standalone/drakbackup_.c:2135
-msgid "Other Media"
-msgstr "´àãÓØ ¼ÕÔØø"
-
-#: ../../standalone/drakbackup_.c:2141
-msgid "Restore system"
-msgstr "¾ÑÝÞÒØ áØáâÕÜ"
-
-#: ../../standalone/drakbackup_.c:2142
-msgid "Restore Users"
-msgstr "¾ÑÝÞÒØ ÚÞàØáÝØÚÕ"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Restore Other"
-msgstr "¾ÑÝÞÒØ ÞáâÐÛÞ"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr "Ø×ÐÑÕàØâÕ ßãâÐúã ×Ð ÞÑÝÐÒùÐúÕ (ãÜÕáâÞ /)"
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "ÃàÐÔØ ÝÞÒØ backup ßàÕ ÞÑÝÐÒùÐúÐ (áÐÜÞ ×Ð ØÝÚàÕÜÕÝâÐÛÝÕ backup-Õ.)"
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr "ÃÚÛÞÝØ ÚÞàØáÝØçÚÕ ÔØàÕÚâÞàØøãÜÕ ßàÕ ÞÑÝÐÒùÐúÐ"
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr "¾ÑÝÞÒØ áÒÕ backup-ÞÒÕ"
-
-#: ../../standalone/drakbackup_.c:2215
-msgid "Custom Restore"
-msgstr "¾ÑÝÐÒùÐúÕ ßÞ ÖeùØ"
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr "¿ÞÜÞû"
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr "¿àÕâåÞÔÝØ"
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "ÁÐçãÒÐø"
-
-#: ../../standalone/drakbackup_.c:2307
-msgid "Build Backup"
-msgstr "ºàÕØàÐø backup"
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-msgid "Restore"
-msgstr "¾ÑÝÞÒØ"
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr "ÁÛÕÔÕûØ"
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"ºàÕØàÐøâÕ backup ßàÕ ÞÑÝÐÒùÐúÐ...\n"
-" ØÛØ ßÞâÒàÔØâÕ ÔÐ øÕ ÒÐèÐ ßãâÐúÐ ØáßàÐÒÝÐ."
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"³àÕèÚÐ ßàØ áÛÐúã mail-Ð\n"
-"  ÒÐè Ø×ÒÕèâÐø ÝØøÕ ßÞáÛÐÝ\n"
-"  ¿ÞÔÕáØâÕ sendmail"
-
-#: ../../standalone/drakbackup_.c:2512
-msgid "Package List to Install"
-msgstr "»ØáâÐ ßÐÚÕâØ ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"³àÕèÚÐ âÞÚÞÜ áÛÐúÐ äÐøÛÐ ßàÕÚÞ FTP-Ð.\n"
-" ¸áßàÐÒØâÕ ÒÐèã FTP ÚÞÝäØÓãàÐæØøã."
-
-#: ../../standalone/drakbackup_.c:2563
-msgid "Please select data to restore..."
-msgstr "¸×ÐÑÕàØâÕ ßÞÔÐâÚÕ ×Ð ÞÑÝÐÒùÐúÕ..."
-
-#: ../../standalone/drakbackup_.c:2584
-msgid "Please select media for backup..."
-msgstr "¸×ÐÑÕàØâÕ ÜÕÔØø ÚÞjØ ÖÕÛØâÕ ÔÐ ÚÞàØáØâØâÕ ×Ð backup..."
-
-#: ../../standalone/drakbackup_.c:2606
-msgid "Please select data to backup..."
-msgstr "¸×ÐÑÕàØâÕ ßÞÔÐâÚÕ ÚÞjØ ÖÕÛØâÕ ÔÐ backup-ãøÕâÕ..."
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"½ØøÕ ßàÞÝÐòÕÝ ÚÞäØÓãàÐæØÞÝØ äÐøÛ \n"
-"ºÛØÚÝØâÕ ÝÐ ÇÐàÞÑúÐÚ ØÛØ ½ÐßàÕÔÝÞ."
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr "à àÐ×ÒÞøã ... ÜÞÛØÜ ²Ðá áÐçÕÚÐøâÕ"
-
-#: ../../standalone/drakbackup_.c:2729
-msgid "Backup system files"
-msgstr "Backup-ãø áØáâÕÜáÚÕ äÐøÛÞÒÕ"
-
-#: ../../standalone/drakbackup_.c:2731
-msgid "Backup user files"
-msgstr "Backup-ãø ÚÞàØáÝØçÚÕ äÐøÛÞÒÕ"
-
-#: ../../standalone/drakbackup_.c:2733
-msgid "Backup other files"
-msgstr "Backup-ãø ÞáâÐÛÕ äÐøÛÞÒÕ"
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr "ÃÚãßÝØ ÝÐßàÕÔÐÚ"
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr "äÐøÛÞÒØ ßÞáÛÐÝØ ßàÕÚÞ FTP-Ð"
-
-#: ../../standalone/drakbackup_.c:2761
-msgid "Sending files..."
-msgstr "ÈÐùÕÜ äÐøÛÞÒÕ..."
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr "»ØáâÐ ßÞÔÐâÐÚÐ ÚÞøÕ ãÚùãçãøÕÜ ÝÐ CDROM."
-
-#: ../../standalone/drakbackup_.c:2889
-msgid "Please enter the cd writer speed"
-msgstr "ÃÝÕáØâÕ Ñà×ØÝã cd ßØáÐçÐ"
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "ÃÝÕáØâÕ ØÜÕ ÒÐèÕÓ CD ¿ØáÐçÐ (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2913
-msgid "Please check if you want to include install boot on your CD."
-msgstr "¿àÞÒÕàØâÕ ÔÐ ÛØ ÖÕÛØâÕ ÔÐ ãÚùãçØâÕ install boot ÝÐ ÒÐè CD."
-
-#: ../../standalone/drakbackup_.c:2979
-msgid "Backup Now from configuration file"
-msgstr "Backup-ãø áÐÔÐ Ø× ÚÞÝäØÓãàÐæØÞÝÞÓ äÐøÛÐ"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "View Backup Configuration."
-msgstr "¿ÞÓÛÕÔÐø Backup ºÞÝäØÓãàÐæØøã."
-
-#: ../../standalone/drakbackup_.c:3010
-msgid "Wizard Configuration"
-msgstr "ÇÐàÞÑúÐÚ ºÞÝäØÓãàÐæØøa"
-
-#: ../../standalone/drakbackup_.c:3014
-msgid "Advanced Configuration"
-msgstr "½ÐßàÕÔÝÐ KÞÝäØÓãàÐæØøa"
-
-#: ../../standalone/drakbackup_.c:3018
-msgid "Backup Now"
-msgstr "Backup ÁÐÔ"
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"¾ßØá ÞßæØøÐ:\n"
-"\n"
-" à ÞÒÞÜ ÚÞàÐÚã Drakbackup ÒÐÜ ÞÜÞÓãûÐÒÐ ÔÐ ßàÞÜÕÝØâÕ:\n"
-"\n"
-" - ¼ÞÔ ÚÞÜßàÕáØøÕ:\n"
-"    \n"
-"      ÃÚÞÛØÚÞ Ø×ÐÑÕàÕâÕ bzip2 ÚÞÜßàÕáØøã, ÑÞùÕ ûÕâÕ\n"
-"      ÚÞÜßàÕáÞÒÐâØ ßÞÔÐâÚÕ ÞÔ gzip-Ð (ÞÚÞ 2-10 %).\n"
-"      ¾ÒÐ ÞßæØøÐ ÝØøÕ áÕÛÕÚâÞÒÐÝÐ ßÞ default-ã ×ÑÞÓ\n"
-"      âÞÓÐ èâÞ ÞÒÐ ÚÞÜßàÕáØøÐ ×ÐåâÕÒÐ ÒØèÕ ÒàÕÜÕÝÐ ( ÞÚÞ 1000% ÒØèÕ).\n"
-" \n"
-" - ¼ÞÔ ÐÖãàØàÐúÐ:\n"
-"\n"
-"      ¾ÒÐ ÞßæØøÐ ûÕ ÐÖãàØàÐâØ ÒÐè backup, ÐÛØ ÞÒÐ\n"
-"      ÞßæØøÐ ÝØøÕ ÝÐàÞçØâÞ ßàÐÚâØçÝÐ ×ÐâÞ èâÞ ÜÞàÐâÕ ÔÐ\n"
-"      àÐáßÐÚãøÕâÕ ÒÐè backup ßàÕ ÝÕÓÞ ÓÐ ÜÞÖÕâÕ ÐÖãàØàÐâØ.\n"
-"      \n"
-" - the .backupignore ÜÞÔ:\n"
-"\n"
-"      ºÐÞ áÐ cvs-ÞÜ, Drakbackup ûÕ ØÓÝÞàØáÐâØ áÒÕ ãÚùãçÕÝÕ\n"
-"      àÕäÕàÕÝæÕ .backupignore äÐøÛÞÒÐ ã áÒÐÚÞÜ ÔØàÕÚâÞàØøãÜã.\n"
-"      ßàØÜÕà: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" ½ÕÚÕ ÓàÕèÚÕ âÞÚÞÜ sendmail-Ð áã ã×àÞÚÞÒÐÝÕ \n"
-" ÛÞèÞÜ ÚÞÝäØÓãàÐæØøÞÜ postfix-Ð. ´Ð ÑØ Øå àÕèØÛØ ÜÞàÐâÕ ÔÐ\n"
-" ßÞÔÕáØâÕ myhostname ØÛØ mydomain ã /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"¾ßØá ÞßæØøÐ:\n"
-"\n"
-" - Backup áØáâÕÜáÚØå äÐøÛÞÒÐ:\n"
-"       \n"
-"\t¾ÒÐ ÞßæØøÐ ÔÞ×ÒÞùÐÒÐ ÔÐ backup-ãøÕâÕ ÒÐè /etc ÔØàÕÚâÞàØøãÜ,\n"
-"\tÚÞøØ áÐÔàÖØ áÒÕ ÚÞÝäØÓãàÐæØÞÝÕ äÐøÛÞÒÕ. ¼ÞÛØÜ ²Ðá ÔÐ ÑãÔÕâÕ\n"
-"\tßÐÖùØÒØ âÞÚÞÜ ÞÑÝÐÒùÐúÐ ÔÐ ÝÕ ÑØ ßàÕßØáÐÛØ áÛÕÔÕûÕ äÐøÛÞÒÕ:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup ºÞàØáÝØçÚØå äÐøÛÞÒÐ: \n"
-"\n"
-"\t¾ÒÐ ÞßæØøÐ ÒÐÜ ÞÜÞÓãûÐÒÐ ÔÐ áÕÛÕÚâãøÕâÕ áÒÕ ÚÞàØáÝØÚÕ ÚÞøÕ ÖÕÛØâÕ \n"
-"\tÔÐ backup-ãøÕâÕ.\n"
-"\t´Ð ÑØ áÐçãÒÐÛØ ßàÞáâÞà ÝÐ ÔØáÚã, ßàÕßÞàãçãøÕÜÞ ÔÐ \n"
-"\tãÚùãçãøÕâÕ äÐøÛÞÒÕ Ø× ÚÕèÐ ØÝâÕàÝÕâ ßàÕâàÐÖØÒÐçÐ.\n"
-"\n"
-" - Backup ¾áâÐÛØå äÐøÛÞÒÐ: \n"
-"\n"
-"\t¾ÒÐ ÞßæØøÐ ÒÐÜ ÞÜÞÓãûÐÒÐ ÔÐ ÔÞÔÐâÕ øÞè ßÞÔÐâÐÚÐ ×Ð Backup.\n"
-"\tÁÐ ÞÒÞÜ ÞßæØøÞÜ âàÕÝãâÝÞ ÝØøÕ ÜÞÓãûÕ \n"
-"\tØ×ÐÑàÐâØ ØÝÚàÕÜÕÝâÐÛÝØ backup.\t\t\n"
-" \n"
-" - ¸ÝÚàÕÜÕÝâÐÛÝØ Backup-ÞÒØ:\n"
-"\n"
-"\t¸ÝÚàÕÜÕÝâÐÛÝØ backup øÕ ÝÐøÜÞûÝØøÐ \n"
-"\tÞßæØøÐ ×Ð backup. ¾ÒÐ ÞßæØøÐ ÒÐÜ ÞÜÞÓãûÐÒÐ \n"
-"\tÔÐ áÒÕÒ ÒÐèÕ ßÞÔÐâÚÕ ßàÒØ ßãâ, Ð \n"
-"\tÚÐáÝØøÕ áÐÜÞ ÞÝÕ Ø×ÜÕúÕÝÕ.\n"
-"\tÂÐÔÐ ûÕâÕ ÜÞûØ, âÞÚÞÜ ÞÑÝÐÒùÐúÐ\n"
-"\tÔÐ ÞÑÝÞÒØâÕ ÒÐèÕ ßÞÔÐâÚÕ ßÞ ÞÔàÕòÕÝÞÜ\n"
-"\tÔÐâãÜã.\n"
-"\tÃÚÞÛØÚÞ ÝØáâÕ Ø×ÐÑàÐÛØ ÞÒã ÞßæØøã áÒØ\n"
-"\táâÐàØ backup-ÞÒØ áã Ø×ÑàØáÐÝØ ßàÕ áÒÐÚÞÓ backup-Ð.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"¾ßØá ÞÑÝÐÒùÐúÐ:\n"
-" \n"
-"ÁÐÜÞ ÝÐøÝÞÒØøØ ßÞÔÐæØ ûÕ ÑØâØ ÚÞàØèûÕÝØ, ×ÐâÞ èâÞ ØÝÚàÕÜÕÝâÐÛÝØ \n"
-"backup-ã ÝÕÞßåÞÔÝÞ ÔÐ ÞÑÝÐÒùÐ áâÐàÕ backup-ÞÒÕ øÕÔÐÝ ßÞ øÕÔÐÝ.\n"
-"\n"
-"ÃÚÞÛØÚÞ ÝÕ ÖÕÛØâÕ ÔÐ ÞÑÝÐÒùÐâÕ ÞÔàÕòÕÝÞÓ ÚÞàØáÝØÚÐ ÔÕáÕÛÕÚâãøâÕ áÒÕ\n"
-"úÕÓÞÒÕ áÕÛÕÚæØøÕ.\n"
-"\n"
-"à ÔàãÓÞÜ áÛãçÐøã, ÜÞûØ ûÕâÕ ÔÐ Ø×ÐÑÕàÕâÕ áÐÜÞ øÕÔÐÝ ÞÔ ÞÒØå\n"
-"\n"
-" - ¸ÝÚàÕÜÕÝâÐÛÝØ Backup-ÞÒØ:\n"
-"\n"
-"\t¸ÝÚàÕÜÕÝâÐÛÝØ backup øÕ ÝÐøÜÞûÝØøÐ ÞßæØøÐ \n"
-"\tã backup-ã, øÕà ÒÐÜ ÞÜÞÓãûÐÒÐ ÔÐ \n"
-"\tto backup-ãøÕâÕ áÒÕ ßÞÔÐâÚÕ ßàÒØ ßãâ, Ð \n"
-"\tÚÐáÝØøÕ áÐÜÞ ÞÝÕ ÚÞøØ áã Ø×ÜÕúÕÝØ.\n"
-"\tÂÐÚÞ ûÕâÕ  ÜÞûØ âÞÚÞÜ ÞÑÝÐÒùÐúÐ\n"
-"\tÔÐ ÞÑÝÞÒØâÕ ÒÐèÕ ßÞÔÐâÚÕ áÐ ÞÔàÕòÕÝØÜ\n"
-"\tÔÐâãÜÞÜ.\n"
-"\tÃÚÞÛØÚÞ ÝØáâÕ Ø×ÐÑàÐÛØ ÞÒã ÞßæØøã áÒØ\n"
-"\táâÐàØ backup-ÞÒØ ûÕ ÑØâØ Ø×ÑàØáÐÝØ ßàÕ áÒÐÚÞÓ backup-Ð.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" ¾ÒÐø ßàÞÓàÐÜ øÕ ÑÕáßÐÛâÐÝ; ÜÞÖÕâÕ ÓÐ àÕÔØáâàØÑãØàÐâØ Ø/ØÛØ ÜÕúÐâØ\n"
-" ßÞÔ ãáÛÞÒØÜÐ GNU General Public License ÚÐÚÞ øÕ ÞÑøÐÒùÕÝÞ\n"
-" ã Free Software ÄÞÝÔÐæØøØ; ØÛØ ÒÕà×ØøØ 2, ØÛØ (ã ÒÐèÕÜ áÛãçÐøã)\n"
-" ÑØÛÞ ÚÞøÞø ÝÞÒØøÞø ÒÕà×ØøØ.\n"
-"\n"
-" ¾ÒÐø ßàÞÓàÐÜ øÕ ÔØáâàØÑãØàÐÝ ã ÝÐÔØ ÔÐ ûÕ ÑØâØ ÞÔ ÚÞàØáâØ,\n"
-" áÛØ ±µ· ¸º°º²¸Å ³°À°½Æ¸¨°; çÐÚ Ø ÑÕ× ÓÐàÐÝæØøÕ ×Ð\n"
-" º¾À¸Á½¾ÁÂ Ø ¿À°ºÂ¸Ç½Ã ÿ¾ÂÀµ±Ã.  ¿ÞÓÛÕÔÐøâÕ\n"
-" GNU General Public »ØæÕÝæã ×Ð ÒØèÕ ÔÕâÐùÐ.\n"
-"\n"
-" ÂàÕÑÐÛØ ÑØ ÔÐ ÜÐâÕ ÚÞßØøã GNU General Public »ØæÕÝæÕ\n"
-" ×ÐøÕÔÝÞ áÐ ÞÒØÜ ßàÞÓàÐÜÞÜ; ãÚÞÛØÚÞ øÕ ÝÕÜÐâÕ, ßØèØâÕ ÝÐÜ ÝÐ ÐÔàÕáã Free "
-"Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"¾ßØá:\n"
-"\n"
-"  Drakbackup áÕ ÚÞàØáâØ ×Ð backup ÒÐèÕÓ áØáâÕÜÐ.\n"
-"  ÂÞÚÞÜ ÚÞÝäØÓãàÐæØøÕ ÜÞÖÕâÕ Ø×ÐÑàÐâØ: \n"
-"\t- ÁØáâÕÜáÚÕ äÐøÛÞÒÕ, \n"
-"\t- ºÞàØáÝØçÚÕ äÐøÛÞÒÕ, \n"
-"\t- ¾áâÐÛÕ äÐøÛÞÒÕ.\n"
-"\tØÛØ  ÁÒÕ ÒÐè áØáâÕÜ ...  Ø ´àãÓÞ (ÚÐÞ èâÞ áã Windows ¿ÐàâØæØøÕ)\n"
-"\n"
-"  Drakbackup ÒÐÜ ÔÞ×ÞÒÞùÐÒÐ backup yÒÐèÕÓ áØáâÕÜÐ ÝÐ:\n"
-"\t- ÅÐàÔ ÔØáÚ.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (ÑÕ× ÐãâÞáâÐàâÐ, rescue Ø autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup ÔÞ×ÒÞùÐÒÐ ÒÐ ÞÑÛÞÒØâÕ áÒÞø áØáâÕÜ ã\n"
-"  Ø×ÐÑàÐÝØ ÚÞàØáÝØçÚØ ÔØàÕÚâÞàØøãÜ.\n"
-"\n"
-"  ¿Þ default-ã áÒØ backup-ÞÒØ ûÕ ÑØâØ áÜÕèâÕÝØ ã ÒÐè\n"
-"  /var/lib/drakbackup ÔØàÕÚâÞàØøãÜ\n"
-"\n"
-"  ºÞÝäØÓãàÐæØÞÝØ äÐøÛ:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"ºÞàÐÚ ×Ð ÞÑÝÐÒùÐúÕ:\n"
-"  \n"
-"  ÂÞÚÞÜ ßàÞæÕáÐ ÞÑÝÐÒùÐúÐ, DrakBackup ûÕ ãÚÛÞÝØâØ \n"
-"  ÒÐè ÞàÓØÝÐÛÝØ ÔØàÕÚâÞàØøãÜ Ø ßàÞÒÕàØâØ ÔÐ ÛØ áã áÒØ \n"
-"  backup äÐøÛÞÒØ ØáßàÐÒÝØ. ¿àÕßÞàãçãøÕ áÕ \n"
-"  ÔÐ ãàÐÔØâÕ ßÞáÛÕÔúØ backup ßàÕ ÞÑÝÐÒùÐúÐ.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"¾ßØá ÞæØøÐ:\n"
-"\n"
-"±ãÔØâÕ ßÐÖùØÒØ ÚÐÔÐ ÚÞàØáâØâÕ ftp backup, ×ÐâÞ èâÞ áÐÜÞ \n"
-"backup-ÞÒØ ÚÞøØ áã ÒÕû ÚàÕØàÐÝØ áã ßÞáÛÐâØ ÝÐ áÕàÒÕà.\n"
-"ÂÐÚÞ ÔÐ ã ÞÒÞÜ âàÕÝãâÚã, ÜÞàÐâÕ ÔÐ ÚàÕØàÐâÕ backup ÝÐ åÐàÔ ÔØáÚã \n"
-"ßàÕ ÝÕÓÞ ÓÐ ßÞèÐùÕâÕ ÝÐ áÕàÒÕà.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"¿àÞÑÛÕÜØ ßàØ ÞÑÝÐÒùÐúã:\n"
-"\n"
-"ÂÞÚÞÜ ßàÞæÕáÐ ÞÑÝÐÒùÐúÐ, Drakbackup ûÕ ßàÞÒÕàØâØ áÒÕ ÒÐèÕ \n"
-"backup äÐøÛÞÒØ ßàÕ ÝÕÓÞ Øå ÞÑÝÞÒØ.\n"
-"¿àÕ ÞÑÝÐÒùÐúÐ, Drakbackup ûÕ ãÚÛÞÝØâØ \n"
-"ÒÐè ÞàÓØÝÐÛÝØ ÔØàÕÚâÞàØøãÜ, Ø Ø×ÓãÑØûÕâÕ áÒÕ \n"
-"ßÞÔÐâÚÕ. ²ÐÖÝÞ øÕ ÔÐ ÑãÔÕâÕ ßÐÖùØÒØ Ø ÔÐ ÝÕÜÕúÐâÕ \n"
-"backup äÐøÛÞÒÕ àãçÝÞ.\n"
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"¾ßØá:\n"
-"\n"
-"  Drakbackup áÕ ÚÞàØáâØ ×Ð backup ÒÐèÕÓ áØáâÕÜÐ.\n"
-"  ÂÞÚÞÜ ÚÞÝäØÓãàÐæØøÕ ÜÞÖÕâÕ Ø×ÐÑàÐâØ \n"
-"\t- ÁØáâÕáÜÚÕ äÐøÛÞÒÕ, \n"
-"\t- ºÞàØáÝØçÚÕ äÐøÛÞÒÕ, \n"
-"\t- ¾áâÐÛÕ äÐøÛÞÒÕ.\n"
-"\tor ÆÕÞ ÒÐè áØáâÕÜ ...  Ø ´àãÓÞ (Ýßà. Windows ¿ÐàâØæØøÐ)\n"
-"\n"
-"  Drakbackup ÒÐÜ ÔÞ×ÒÞùÐÒÐ ÔÐ backup-ãøÕâÕ ÒÐè áØáâÕÜ ÝÐ:\n"
-"\t- ÅÐàÔ ÔØáÚ.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (áÐ autoboot, rescue Ø autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup ÒÐÜ ÔÞ×ÒÞùÐÒÐ ÔÐ ÞÑÝÞÒØâÕ ÒÐè áØáâÕÜ ã \n"
-"  ÞÔÐÑàÐÝÞÜ ÚÞàØáÝØçÚÞÜ ÔØàÕÚâÞàØøãÜã.\n"
-"\n"
-"  ¿Þ default-ã áÒØ backup-ÞÒØ ûÕ ÑØâØ áÜÕèâÕÝØ ã ÒÐè\n"
-"  /var/lib/drakbackup ÔØàÕÚâÞàØøãÜ\n"
-"\n"
-"  ºÞÝäØÓãàÐæØÞÝØ äÐøÛ:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"¿ÞáâãßÐÚ ÞÑÝÐÒùÐúÐ:\n"
-"  \n"
-"  ÂÞÚÞÜ ßàÞæÕáÐ ÞÑÝÐÒùÐúÐ, Drakbackup ûÕ ãÚÛÞÝØâØ\n"
-"  ÒÐè ÞàÓØÝÐÛÝØ ÔØàÕÚâÞàØøãÜ Ø ßàÞÒÕàØâØ ÔÐ ÛØ áã áÒØ\n"
-"  backup äÐøÛÞÒØ ØáßàÐÒÝØ. ¿àÕßÞàãçãøÕ áÕ\n"
-"  ÔÐ ãàÐÔØâÕ ßÞáÛÕÔúØ backup ßàÕ ÞÑÝÐÒùÐúÐ.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "¸ÝáâÐÛÐæØøÐ %s-Ð ÝÕãáßÕÛÐ. ³àÕèÚÐ øÕ:"
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr "ãßÞâàÕÑÐ: drakfloppy\n"
-
-#: ../../standalone/drakfloppy_.c:68
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Module name"
-msgstr "¸ÜÕ ÜÞÔãÛa"
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Size"
-msgstr "²ÕÛØçØÝa"
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: ../../standalone/drakfloppy_.c:91
-msgid "boot disk creation"
-msgstr "ºàÕØàaúÕ boot ÔØáÚa"
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr "default"
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr "DrakFloppy ÓàeèÚÐ: %s"
-
-#: ../../standalone/drakfloppy_.c:126
-msgid "kernel version"
-msgstr "²Õà×ØjÐ ÚÕàÝÕÛa"
-
-#: ../../standalone/drakfloppy_.c:132
-msgid "General"
-msgstr "¾ßèâe"
-
-#: ../../standalone/drakfloppy_.c:137
-msgid "Expert Area"
-msgstr "´ÕÞ ×Ð ÕÚáßÕàâe"
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd ÞßæØÞÝØ ÐàÓãÜÕÝâØ"
-
-#: ../../standalone/drakfloppy_.c:141
-msgid "Add a module"
-msgstr "´ÞÔÐj ÜÞÔãÛ"
-
-#: ../../standalone/drakfloppy_.c:161
-msgid "force"
-msgstr "áØÛÞÜ"
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr "ãÚÞÛØÚÞ jÕ ßÞâàÕÑÝÞ"
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr "omit scsi ÜÞÔãÛØ"
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr "omit raid ÜÞÔãÛØ"
-
-#: ../../standalone/drakfloppy_.c:200
-msgid "Remove a module"
-msgstr "ÃÚÛÞÝØ ÜÞÔãÛ"
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr "Output"
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr "ºàÕØàÐj ÔØáÚ"
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "¿àÞÒÕàØâÕ ÔÐ ÛØ øÕ ÜÕÔØø ßàØáãâÐÝ ã ãàÕóÐøã %s"
-
-#: ../../standalone/drakfloppy_.c:427
-#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"¼ÕÔØø ÝØøÕ ßàØáãâÐÝ ã ãàÕóÐøã %s.\n"
-"¼ØÛØÜ ÒÐá ÔÐ ÓÐ ãÑÐæØâÕ."
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "½Õ ÜÞÓã ÔÐ äÞàÚãøÕÜ: %s"
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"½Õ ÜÞÓã ÚÞàÕÚâÝÞ ÔÐ ×ÐâÒÞàØÜ mkbootdisk: \n"
-" %s \n"
-" %s"
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr "ÂàÐÖØ ØÝáâÐÛØàÐÝÕ äÞÝâÞÒÕ"
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr "´ÕáÕÛÕÚâÞÒÐÝØ äÞÝâÞÒØ ØÝáâÐÛØàÐÝØ"
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr "ßÐàáØàÐø áÒÕ äÞÝâÞÒÕ"
-
-#: ../../standalone/drakfont_.c:254
-msgid "no fonts found"
-msgstr "äÞÝâÞÒØ ÝØáã ßàÞÝÐòÕÝØ"
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-msgid "done"
-msgstr "ãàÐòÕÝÞ"
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr "ÝÕ ÜÞÓã ÔÐ ßàÞÝÐòÕÜ ÝØøÕÔÐÝ äÞÝâ ÝÐ ÜÞÝâØàÐÝÞø ßÐàâØæØøØ"
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr "¿ÞÝÞÒÞ áÕÛÕÚâãø ØáßàÐÒÝÕ äÞÝâÞÒÕ"
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr "ÝÕ ÜÞÓã ÔÐ ßàÞÝÐòÕÝ ÝØøÕÔÐÝ äÞÝâ.\n"
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr "ÂàÐÖØ äÞÝâÞÒÕ ã ÛØâØ ØÝáâÐÛØàÐÝØå"
-
-#: ../../standalone/drakfont_.c:351
-msgid "Fonts copy"
-msgstr "ºÞßØøÐ äÞÝâÐ"
-
-#: ../../standalone/drakfont_.c:354
-msgid "True Type fonts installation"
-msgstr "¸ÝáâÐÛÐæØøÐ True Type äÞÝâÞÒÐ"
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr "áÐçÕÚÐøâÕ, ã âÞÚã øÕ ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr "¸ÝáâÐÛÐæØøÐ True Type äÞÝâÞÒÐ ×ÐÒàèÕÝÐ"
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr "ºÞÝÒÕà×ØøÐ äÞÝâÞÒÐ"
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr "ÚàÕØàÐÜ type1inst"
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr "Ghostscript àÕäÕàÕÝæØàÐúÕ"
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr "ºÞÝÒÕà×ØøÐ ttf äÞÝâÞÒÐ"
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr "ºÞÝÒÕà×ØøÐ pfm äÞÝâÞÒÐ"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr "ÁÐÖÜØ temp äÐøÛÞÒÕ"
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr "ÀÕáâÐàâãø XFS"
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr "·ÐÖÜØ ÄÞÝâ äÐøÛÞÒÕ"
-
-#: ../../standalone/drakfont_.c:470
-msgid "xfs restart"
-msgstr "ÀÕáâÐàâ xfs"
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"¿Õ ØÝáâÐÛÐæØøÕ ØøÕÔÝÞÓ äÞÝâÐ, ßàÞÒÕàØâÕ ÔÐ ÛØ ØÜÐâÕ ßàÐÒÞ ÔÐ Øå ØÝáâÐÛØàÐâÕ "
-"Ø ÚÞàØáâØâÕ ÝÐ ÒÐèÕÜ áØáâÕÜã.\n"
-"\n"
-"-¼ÞÖÕâÕ ØÝáâÐÛØàÐâØ äÞÝâÞÒÕ ÝÐ ãßÞÞÑØçÐøÕÝØ ÝÐçØÝ. à àÕòØÜ áÛãçÐøÕÒØÜÐs, "
-"ÑÐÓÞÒØâØ äÞÝâÞÒØ ÜÞÓã áàãèØâØ ÒÐè X ÁÕàÒÕà."
-
-#: ../../standalone/drakfont_.c:551
-msgid "Fonts Importation"
-msgstr "ÃÒÞ× äÞÝâÞÒÐ"
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr "´ÞÑÐÒØ Windows äÞÝâÞÒÕ"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Uninstall Fonts"
-msgstr "´ÕØÝáâÐÛØàÐø äÞÝâÞÒÕ"
-
-#: ../../standalone/drakfont_.c:571
-msgid "Advanced Options"
-msgstr "½ÐßàÕÔÝÕ ÞßæØøÕ"
-
-#: ../../standalone/drakfont_.c:573
-msgid "Font List"
-msgstr "»ØáâÐ äÞÝâÞÒÐ"
-
-#: ../../standalone/drakfont_.c:740
-msgid "Choose the applications that will support the fonts :"
-msgstr "¸×ÐÑÕàØâÕ ÐßÛØÚÐæØøÕ ÚÞøÕ ûÕ ßÞÔàÖÐÒÐâØ äÞÝâÞÒÕ :"
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:748
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:752
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:756
-msgid "Generic Printers"
-msgstr "Generic ÈâÐÜßÐçØ"
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "¸×ÐÑÕàØâÕ äÞÝâ ØÛØ ÔØàÕÚâÞàØøãÜ Ø ÚÛØÚÝØâÕ ÝÐ  '´ÞÔÐø'"
-
-#: ../../standalone/drakfont_.c:829
-msgid "Install List"
-msgstr "¸ÝáâÐÛØàÐø ÛØáâã"
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr "ÚÛØÚÝØâÕ ÞÒÔÕ ãÚÞÛØÚÞ áâÕ áØÓãàÝØ."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Ð ÞÒÔÕ ãÚÞÛØÚÞ ÝØáâÕ."
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr "´ÕáÕÛÕÚâãø ÁÒÕ"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Selected All"
-msgstr "ÁÕÛÕÚâãø ÁÒÕ"
-
-#: ../../standalone/drakfont_.c:898
-msgid "Remove List"
-msgstr "ÃÚÛÞÝØ »Øáâã"
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-msgid "Initials tests"
-msgstr "ÂÕáâÞÒØ ØÝØæØøÐÛÐ"
-
-#: ../../standalone/drakfont_.c:916
-msgid "Copy fonts on your system"
-msgstr "ºÞßØàÐø äÞÝâÞÒÕ ã áØáâÕÜ"
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr "¸ÝáâÛØàÐø Ø ÚÞÝÒÕàâãø äÞÝâÞÒÕ"
-
-#: ../../standalone/drakfont_.c:918
-msgid "Post Install"
-msgstr "¿Þáâ-ØÝáâÐÛÐæØøÐ"
-
-#: ../../standalone/drakfont_.c:936
-msgid "Remove fonts on your system"
-msgstr "ÃÚÛÞÝØ äÞÝâÞÒÕ Ø× áØáâÕÜÐ"
-
-#: ../../standalone/drakfont_.c:937
-msgid "Post Uninstall"
-msgstr "¿Þáâ-ÔÕØÝáâÐÛÐæØøÐ"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-msgid "Internet Connection Sharing"
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ"
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ âàÕÝãâÝÞ ÞÜÞÓãûÕÝÞ "
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¿ÞÔeèÐÒaúe Ôeùeúa ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ Òeû ×ÐÒàèÕÝÞ.\n"
-"ÂàÕÝãâÝÞ jÕ ÞÜÞÓãûÕÝÞ.\n"
-"\n"
-"èâÐ ÖÕÛØâÕ ÔÐ ãàÐÔØâe?"
-
-#: ../../standalone/drakgw_.c:139
-msgid "disable"
-msgstr "ÞÝeÜÞÓãûØ"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr "ãÚÛÞÝØ"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "reconfigure"
-msgstr "ßÞÝÞÒÞ ßÞÔÕáØ"
-
-#: ../../standalone/drakgw_.c:142
-msgid "Disabling servers..."
-msgstr "ÃÚÛaúÐÜ áÕàÒØáe..."
-
-#: ../../standalone/drakgw_.c:150
-msgid "Internet connection sharing is now disabled."
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ ÞÝeÜÞÓãûÕÝÞ."
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ âàÕÝãâÝÞ ÞÝeÜÞÓãûÕÝÞ"
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¿ÞÔeèÐÒaúe Ôeùeúa ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ Òeû ×ÐÒàèÕÝÞ.\n"
-"ÂàÕÝãâÝÞ jÕ ÞÝeÜÞÓãûÕÝÞ.\n"
-"\n"
-"èâÐ ÖÕÛØâÕ ÔÐ ãàÐÔØâe?"
-
-#: ../../standalone/drakgw_.c:164
-msgid "enable"
-msgstr "ÞÜÞÓãûØ"
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr ">¾ÜÞÓãûÐÒÐÜ áÕàÒØáØ..."
-
-#: ../../standalone/drakgw_.c:176
-msgid "Internet connection sharing is now enabled."
-msgstr "´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ ÞÜÞÓãûÕÝÞ."
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"²aè ÚÞÜßjãâÕà ÜÞÖÕâÕ ßÞÔÕáØâØ ×Ð ÔeùeúÕ úÕÓÞÒÕ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje.\n"
-"áÐ ÞÒÞÜ ÞßæØjÞÜ, ÔàãÓØ ÚÞÜßjãâÕàØ ÝÐ ÒaèÞj ÛÞÚÐÛÝÞj ÜàeÖØ ûÕ ÜÞûØ ÔÐ "
-"ÚÞàØáâe¸ÝâÕàÝÕâ ÚÞÝÕÚæØjã áÐ ÞÒÞÓ ÚÞÜßjãâÕàa.\n"
-"\n"
-"½ÐßÞÜÕÝa: ßÞâàÕÑÐÝa ÒÐÜ jÕ ÜàeÖÝÐ ÚÐàâØæÐ ÔÐ ÑØ ßÞÔÕáØÛØ ÛÞÚÐÛÝã ÜàeÖã"
-"(LAN).\n"
-"\n"
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ßÞÔÕáØâÕ ÔeùeúÕ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje ?"
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¸ÝâÕàäÕjá %s (ÚÞàØáâeûØ ÜÞÔãÛ %s)"
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid "Interface %s"
-msgstr "¸ÝâÕàäÕjá %s"
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr "½ÕÜÐ ÜàeÖÝÞÓ ÐÔÐßâÕàÐ ã ÒaèÕÜ áØáâÕÜã !"
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"½ØjÕ ÔÕâÕÚâÞÒÐÝÐ ÝØjÕÔÝÐ ÜàeÖÝÐ ÚÐàâØæa. ¿ÞÚàÕÝØâe ÐÛÐâ ×Ð ÚÞÝäØÓãàØáaúÕ "
-"åÐàÔÒÕàa."
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr "¼àeÖÝØ ØÝâÕàäejá"
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"¿ÞáâÞjØ áÐÜÞ jÕÔÐÝ ÚÞÝäØÓãàØáÐÝ ÜàeÖÝØ ÐÔÐßâÕà ÝÐ ÒaèÕÜ áØáâÕÜã:\n"
-"\n"
-"%s\n"
-"\n"
-"ÁÐÔÐ ßÞÔÕÐÒÐÜ Òaèã ÛÞÚÐÛÝã ÜàeÖã áÐ ÞÒØÜ ÐÔÐßâÕàÞÜ."
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "¸×ÐÑÕàØâÕ ÚÞjØ ûÕ ÜàeÖÝØ ÐÔÐßâÕà ÑØâØ ÚÞàØèâÕÝ ×a LANÜàeÖã."
-
-#: ../../standalone/drakgw_.c:267
-msgid "Network interface already configured"
-msgstr "¼àÕÖÝØ ØÝâÕàäÕøá øÕ ÒÕû ßÞÔÕèèÕÝ"
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"ÃßÞ×ÞàÕúÕ, ÜàÕÖÝØ ÐÔÐßâÕà (%s) iøÕ ÒÕû ßÞÔÕèÕÝ.\n"
-"\n"
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ÓÐ ÐãâÞÜÐâáÚØ ßàÕÚÞÝäØÓãàØèÕâÕ?\n"
-"\n"
-"¼ÞÖÕâÕ âÞ ãçØÝØâØ àãçÝÞ ÐÛØ ÜÞàÐâÕ ÔÐ ×ÝÐâÕ èâÐ àÐÔØâÕ."
-
-#: ../../standalone/drakgw_.c:273
-msgid "Automatic reconfiguration"
-msgstr "°ãâÞÜÐâáÚÐ àÕÚÞÝäØÓãàÐæØøÐ"
-
-#: ../../standalone/drakgw_.c:274
-msgid "Show current interface configuration"
-msgstr "¿àØÚÐÖØ âàÕÝãâÝã ÚÞÝäØÓãàÐæØøã"
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"ÂàÕÝãâÝÐ ÚÞÝäØÓãàÐæØøÐ ×Ð `%s':\n"
-"\n"
-"¼àÕÖÐ: %s\n"
-"IP ÐÔàÕáÐ %s\n"
-"IP ÐâàØÑãâØ: %s\n"
-"´àÐøÒÕà: %s"
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"¼ÞÓã ÔÐ ×ÐÔàÖØÜ ÒÐèã âàÕÝãâÝã ÚÞÝäØÓãàÐæØøã Ø ßàÕâßÞáâÐÒØâØ ÔÐ øÕ ÒÕû "
-"ßÞÔÕèÕÝ DHCP áÕàÒÕà; ã âÞÜ áÛãçÐøã ßàÞÒÕàØâÕ ÔÐ ÛØ øÕ ÔÞÑàÞ ÞçØâÐÝÐ C-Class "
-"Network ÚÞøØ ÚÞàØáâØâÕ ×Ð ÒÐèã ÛÞÚÐÛÝã ÜàÕÖã; ¨Ð øÕ ÝÕûã àÕÚÞÝäØÓãàØáÐâØ Ø "
-"ÝÕûã ÔØàÐâØ ã ÒÐèã DHCP áÕàÒÕà ÚÞÝäØÓãàÐæØøã.\n"
-"\n"
-"¸ÝÐçÕ, øÐ ÜÞÓã ÔÐ àÕÚÞÝäØÓãàØèÕÜ ÒÐè ØÝâÕàäÕøá Ø (àÕ)ÚÞÝäØÓãàØèÕÜ DHCP "
-"áÕàÒÕà ×Ð ÒÐá.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr "C-Class »ÞÚÐÛÝÐ ¼àÕÖÐ"
-
-#: ../../standalone/drakgw_.c:294
-msgid "(This) DHCP Server IP"
-msgstr "(¾ÒÐø) DHCP áÕàÒÕà IP"
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr "ÀÕÚÞÝäØÓãàØèØ ØÝâÕàäÕøá Ø DHCP áÕàÒÕà"
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "»ÞÚÐÛÝÐ ¼àÕÖÐ ÝØøÕ ×ÐÒàèØÛÐ áÐ`.0', bailing out."
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "¿ÞâÕÝæØjÐÛÝØ ÚÞÝäÛØÚâ LAN ÐÔàÕáe ã âàÕÝãâÝÞÜ ÚÞÝäØÓ. %s!\n"
-
-#: ../../standalone/drakgw_.c:321
-msgid "Firewalling configuration detected!"
-msgstr "´ÕâÕÚâÞÒÐÝÐ Firewalling ÚÞÝäØÓãàÐæØja"
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"ÃßÞ×Þàeúe ! ¿ÞáâÞjeûa firewalling ÚÞÝäØÓãàÐæØja je ÔÕâÕÚâÞÒÐÝa. ¼ÞÖÔaûÕ ÑØâØ "
-"ßÞâàÕÑÝÞ àãçÝÞ ßÞÔeèÐÒaúÕ ÝÐÚÞÝ ØÝáâÐÛÐæØje."
-
-#: ../../standalone/drakgw_.c:329
-msgid "Configuring..."
-msgstr "KÞÝäØÓãàÐæØjÐ ã âÞÚã..."
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ºÞÝäØÓãàØáaúÕ áÚàØßâØ,ØÝáâÐÛÐæØjÐ áÞäâÒÕàÐ, áâÐàâaúÕ áÕàÒØáÐ..."
-
-#: ../../standalone/drakgw_.c:366
-#, c-format
-msgid "Problems installing package %s"
-msgstr "¿àÞÑÛÕÜØ ßàØ ØÝáâÐÛÐæØjØ %s ßÐÚÕâa"
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"ÁÒÕ jÕ ßÞÔeèÕÝÞ.\n"
-"ÁÐÔÐ ÜÞÖÕâÕ ÔÕÛØâØ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØjã áÐ ÔàãÓØÜ ÚÞÜßjãâÕàØÜÐ ÝÐ ÒaèÞj "
-"ÛÞÚÐÛÝÞj ÜàeÖØ  (LAN), ÚÞàØáâÕûØ ÐãâÞÜÐâáÚã ÜàeÖÝã ÚÞÝäØÓãàÐæØjã (DHCP)."
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"¿ÞÔeèÐÒaúe Ôeùeúa ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ Òeû ×ÐÒàèÕÝÞ ÐÛØ jÕ âàÕÝãâÝÞ "
-"ÞÝeÜÞÓãûÕÝÞ."
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"¿ÞÔeèÐÒaúe Ôeùeúa ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ jÕ Òeû ×ÐÒàèÕÝÞ Ø âàÕÝãâÝÞ jÕ ÞÜÞÓãûÕÝÞ."
-
-#: ../../standalone/drakgw_.c:568
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "´Þ áÐÔÐ ´eùeúÕ ØÝâÕàÝÕâ ÚÞÝÕÚæØjÕ ÝØjÕ ßÞÔeèÐÒÐÝÞ."
-
-#: ../../standalone/drakgw_.c:573
-msgid "Internet connection sharing configuration"
-msgstr "ºÞÝäØÓãàÐæØjÐ ´eùeúÐ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØje"
-
-#: ../../standalone/drakgw_.c:580
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"´ÞÑàÞÔÞèÛØ ã ÐÛÐâ ×Ð ßÞÔeèÐÒaúÕ ´eùeúa ¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÕ\n"
-"%s\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ ¿ÞÔÕáØ (Configure) ÔÐ ÑØ ßÞÚàÕÝãÛØ ßÞÔeèÐÒaúÕ."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜàÕÖe (%d ÐÔÐßâÕàa)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "¿àÞäØÛ: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "ÃÚÛÞÝØ ßàÞäØÛ..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "¿àÞäØÛ ×Ð ÑàØáaúe:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "½ÞÒØ ßàÞäØÛ..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"¸ÜÕ ßàÞäØÛÐ ÚÞøØ áÕ ÚàÕØàÐ (ÝÞÒØ ßàÞäØÛ øÕ ÚàÕØàÐÝ ÚÐÞ ÚÞßØøÐ âàÕÝãâÝÞÓ) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "¸ÜÕ åÞáâÐ:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "¸ÝâÕàÝÕâ ßàØáâãß"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "ÂØß:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "¸ÝâÕàäÕjá:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "ÁâÐâãá:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "¼ÞÛØÜ ²Ðá áÐçÕÚÐøâÕ"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "¿ÞÔÕáØ ¸ÝâÕàÝÕâ ßàØáâãß..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN ÚÞÝäØÓãàÐæØøa"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "´àÐjÒÕà"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "¸ÝâÕàäÕjá"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "¿àÞâÞÚÞÛ"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "ÁâÐúÕ"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "¿ÞÔÕáØ ÛÞÚÐÛÝØ ÜàÕÖã..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "ºÛØÚÝØâÕ ÞÒÔÕ ×Ð ßÞÚàÕâÐúÕ çÐàÞÑúÐÚÐ ->"
-
-#: ../../standalone/draknet_.c:257
-#, fuzzy
-msgid "Wizard..."
-msgstr "çÐàÞÑúÐÚ (ßÞÜÞûÝØÚ)"
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "¿àÞÜÕÝØ"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "ÁÐÜÞ ÜÞÜÕÝÐâ... ßàØÜÕÝÐ ÚÞÝäØÓãàÐæØøÕ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "ºÞÝÕÚâÞÒÐÝ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "½ØjÕ ÚÞÝÕÚâÞÒÐÝ"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "ºÞÝÕÚâÞÒaúÕ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "´ØáÚÞÝÕÚâÞÒaÝ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"ÃßÞ×ÞàÕúÕ, ÔÕâÕÚâÞÒÐÝÐ øÕ øÞè øÕÔÝÐ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØøÐ, ÜÞÖÔÐ ÚÞàØáâØ ÒÐèã "
-"ÜàÕÖã"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"²Ø ÝÕÜÐâÕ ÝØ øÕÔÐÝ ØÝâÕàäÕøá ÚÞøØ øÕ ßÞÔÕèÕÝ.\n"
-"¼ÞàÐâÕ Øå ßàÒÞ ßÞÔÕáØâÕ ÚÛØÚÞÜ ÝÐ 'Configure'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN ÚÞÝäØÓãàÐæØøa"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "°ÔÐßâeà %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "ÁâÐàâÝØ(Boot) ßàÞâÞÚÞÛ"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "¿ÞÚàÕÝãâÞ ßàØ áâÐàâaúã"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP ÚÛØjÕÝâ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "°ÚâØÒØàÐø áÐÔ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "ÔÕÐÚâØÒØàÐø áÐÔ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"¾ÒÐø ØÝâÕàäÕøá øÞè ãÒÕÚ ÝØøÕ ßÞÔÕèÕÝ.\n"
-"¿ÞÚàÕÝØâÕ ÚÞÝäØÓãàÐæØÞÝÞÓ çÐàÞÑúÐÚÐ ã ÓÛÐÒÝÞÜ ßàÞ×Þàã"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"²Ø ÝÕÜÐâÕ ÝØ øÕÔÝã ßÞÔÕèÕÝã ¸ÝâÕàÝÕâ ÚÞÝÕÚæØøã.\n"
-"ºàÕØàÐøâÕ øÕ ÚÛØÚÞÜ ÝÐ 'Configure'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "ºÞÝäØÓãàÐæØjÐ ¸ÝâÕàÝÕâ ÚÞÝÕÚæØjÐ"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "ºÞÝäØÓãàÐæØjÐ ¸ÝâÕàÝÕâ ºÞÝÕÚæØjÐ"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "ÂØß ÚÞÝÕÚæØøÕ: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "¿ÐàÐÜÕâàØ"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "¼àeÖÝÐ ÚÐàâØæa"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP ÚÛØjÕÝâ"
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr "¿ÞÔÕèÐÒÐúÕ áØÓãàÝÞáÝÞÓ ÝØÒÞÐ"
-
-#: ../../standalone/draksec_.c:57
-#, fuzzy
-msgid "Setting security user"
-msgstr "¿ÞÔÕèÐÒÐúÕ áØÓãàÝÞáÝÞÓ ÝØÒÞÐ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ºÞÝâàÞÛÝØ ÆÕÝâÐà"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "¸×ÐÑÕàØâÕ ÐÛÐâ ÚÞøÕ ÖÕÛØâÕ ÔÐ ÚÞàØáâØâÕ"
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Canada (cable)"
-msgstr "ºÐÝÐÔÐ (ÚÐÑÛ)"
-
-#: ../../standalone/drakxtv_.c:72
-#, fuzzy
-msgid "USA (broadcast)"
-msgstr "Á°´ (bcast)"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr "Á°´ (ÚÐÑÛ)"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr "Á°´ (ÚÐÑÛ-hrc)"
-
-#: ../../standalone/drakxtv_.c:73
-#, fuzzy
-msgid "China (broadcast)"
-msgstr "ºØÝÐ (bcast)"
-
-#: ../../standalone/drakxtv_.c:73
-#, fuzzy
-msgid "Japan (broadcast)"
-msgstr "¨ÐßÐÝ (bcast)"
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr "¨ÐßÐÝ (ÚÐÑÛ)"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr "¸áâÞçÝÐ µÒàÞßÐ"
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "France [SECAM]"
-msgstr "ÄàÐÝæãáÚa"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "Ireland"
-msgstr "¸àáÚÐ"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr "·ÐßÐÔÝÐ µÒàÞßÐ"
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Australia"
-msgstr "°ãáâàÐÛØøÐ"
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Newzealand"
-msgstr "½ÞÒØ ·ÕÛÐÝÔ"
-
-#: ../../standalone/drakxtv_.c:76
-#, fuzzy
-msgid "South Africa"
-msgstr "¨ãÖÝÐ °äàØÚÐ"
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr "°àÓÕÝâØÝÐ"
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"¼ÞÛØÜ ²Ðá ÔÐ\n"
-"ãÚãæÐâÕ ÒÐè tv áØáâÕÜ Ø ×ÕÜùã"
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr "TV áØáâÕÜ :"
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr "¿ÞÔàãçøÕ :"
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr "ÁÚÕÝØàÐúÕ TV ÚÐÝÐÛÐ ã âÞÚã ..."
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr "ÁÚÕÝØàÐúÕ ×Ð TV ÚÐÝÐÛÕ"
-
-#: ../../standalone/drakxtv_.c:131
-#, fuzzy
-msgid "There was an error while scanning for TV channels"
-msgstr "³àÕèÚÐ ßàØ ØÝáâÐÛÐæØjØ ßÐÚÕâa:"
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "ãßÞâàÕÑÐ: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "ºÞøØ  àÐáßÞàÕÔ âÐáâÐâãàÕ ÖÕÛØâÕ ?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "´Ð ÛØ ÖÕÛØâÕ ÔÐ BackSpace ÔÐ ÒàÐâØ Delete ã ÚÞÝ×ÞÛã?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "¿àÞÜÕÝØ Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"ÃÑÐæØâe Òaè ¸ÝáâÐÛÐæØÞÝØ CD ã ßÞÓÞÝ Ø ßàØâØáÝØâÕ OK ÚÐÔa áâÕ áßàÕÜÝØ.\n"
-"ÃÚÞÛØÚÞ ÓÐ ÝÕÜÐâÕ ßàØâØáÝØâÕ ¿ÞÝØèâØ ÔÐ ÑØ Ø×ÑÕÓÛØ live upgrade."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "½Õ ÜÞÓã ÔÐ áâÐàâãjÕÜ live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "¿àØÚÐÖØ áÐÜÞ ×Ð Ø×ÐÑàÐÝØ ÔÐÝ"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/´ÐâÞâÕÚa/_½ÞÒa"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/´ÐâÞâÕÚa/_¾âÒÞàØ"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/´ÐâÞâÕÚa/_ÁÝØÜØ"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/´ÐâÞâÕÚa/ÁÝØÜØ _KÐÞ"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/ÄÐjÛ/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_¾ßæØje"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/¾ßæØjÕ/ÂÕáâ"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_¿ÞÜÞû"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/¿ÞÜÞû/_¾..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "ºÞàØáÝØÚ"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "¿ÞàãÚÕ"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "¥yslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake °ÛÐâØ ×Ð ÞÑøÐèúÕúÐ"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "âàÐÖØ"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "°ÛÐâ ×Ð ßàÕÓÛÕÔÐúÕ ÛÞÓ ÔÐâÞâÕÚÐ"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "¾ßæØøÕ"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ßÞÚÛÐßÐúÕ"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "ÐÛØ ÝÕ ßÞÚÛÐßÐ áÕ"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "¸×ÐÑÕàØ ÔÐâÞâÕÚã"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "ºÐÛÕÝÔÐà"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "ÁÐÔàÖÐø ÔÐâÞâÕÚáÕ"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr "Mail/SMS ÐÛÐàÜ"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ÜÞÛØÜ ²Ðá áÐçÕÚÐøâÕ, ßÐàáØàÐÜ ÔÐâÞâÕÚã: %s"
-
-#: ../../standalone/logdrake_.c:407
-msgid "Mail/SMS alert configuration"
-msgstr "º¾ÝäØÓãàÐæØøÐ ÐÛÐàÜÐ ×Ð Mail/SMS"
-
-#: ../../standalone/logdrake_.c:408
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"´ÞÑàÞÔÞèÛØ ã ÐÛÐâ ×Ð ÚÞÝäØÓãàÐæØøã mail/SMS\n"
-"\n"
-"¾ÒÔÕ ÜÞÖÕâÕ ÔÐ ßÞÔÕáØâÕ ÐÛÐàÜÝØ áØáâÕÜ.\n"
-
-#: ../../standalone/logdrake_.c:416
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:421
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:424
-msgid "service setting"
-msgstr "ßÞÔÕèÐÒÐúÕ áÕàÒØáÐ"
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"¾ÓÛÐáØûÕ áÕ ÐÛÐàÜ ãÚÞÛØÚÞ øÕÔÐÝ ÞÔ Ø×ÐÑàÐÝØå áÕàÒØáÐ ÝÕÑãÔÕ ÒØèÕ ÐÚâØÒÐÝ"
-
-#: ../../standalone/logdrake_.c:435
-msgid "load setting"
-msgstr "ãçØâÐø ßÞáâÐÒÚã"
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "¾ÓÛÐáØûÕ áÕ ÐÛÐàÜ ãÚÞÛØÚÞ øÕ ãçØâÐÝÞ ÒÕûÕ ÞÔ ÞÒÕ ÒàÕÔÝÞáâØ"
-
-#: ../../standalone/logdrake_.c:449
-msgid "alert configuration"
-msgstr "ÚÞÝäØÓãàÐæØøa ÐÛÐàÜÐ"
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr "¿ÞÔÕáØâÕ ÝÐçØÝ ÝÐ ÚÞøØ ûÕ ÒÐá áØáâÕÜ ÐÛÐàÜØàÐâØ"
-
-#: ../../standalone/logdrake_.c:493
-msgid "Save as.."
-msgstr "ÁÝØÜØ KÐÞ..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "¸×ÐÑÕàØâe âØß ÜØèÐ"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ÝØøÕ ßàÞÝÐòÕÝ serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "´Ð ØÜØâØàÐÜ àÐÔ 3 âÐáâÕàÐ?"
-
-#: ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "ÃçØâÐÒÐÜ ßÞÔÐâÚÕ ×Ð èâÐÜßÐç ..."
-
-#: ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "´ÕâÕÚâãjÕÜ ãàeòÐje..."
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s ßàÞÝÐòÕÝ ÝÐ %s, ÔÐ ÛØ ÔÐ ÓÐ ßÞÔÕáØÜ ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "¸×ÐÑÕàØâÕ áÚÕÝÕà"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "¾ÒÐø %s áÚÕÝÕà ÝØøÕ ßÞÔàÖÐÝ"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "ÁâÐàâÝØ (boot) ãàÕòÐø"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewalling ÚÞÝäØÓãàÐæØja"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewalling ÚÞÝäØÓãàÐæØja"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"²Ø áâÕ Òeû ßÞÔÕáØÛØ firewall.\n"
-"ºÛØÚÝØâÕ ÝÐ ¿ÞÔÕáØ(Configure) ÔÐ ÑØ Ø×ÜÕÝØÛØ ØÛØ ãÚÛÞÝØÛØ firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"ºÛØÚÝØâÕ ÝÐ ¿ÞÔÕáØ(Configure) ÔÐ ÑØ ßÞÔÕáØÛØ áâÐÝÔÐàÔÝØ firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "¸×ÐÑÕàØâÕ øÕ×ØÚ"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "¸×ÐÑÕàØâÕ ØÝáâ.ÚÛÐáã"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "´ÕâÕÚæØøÐ åÐàÔ ÔØáÚa"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "¿ÞÔÕèÐÒÐúÕ ÜØèÐ"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "¸×ÐÑÕàØ âÐáâÐâãàã"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "ÁØÓãàÝÞáâ"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "¿ÞÔÕáØ ÔÐâÞâeçÝÕ áØáâÕÜÕ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "ÄÞàÜÐâØàÐj ßÐàâØæØje"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "¿ÐÚÕâØ ×Ð ØÝáâÐÛÐæØøã"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "¸ÝáâÐÛØàÐø áØáâÕÜ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "´ÞÔÐø ÚÞàØáÝØÚÐ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "¿ÞÔÕáØ ÜàÕÖã"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "¿ÞÔÕáØ áÕàÒØáÕ"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "¸ÝáâÐÛØàÐø áâÐàâÕà"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "½ÐßàÐÒØ áâÐàâÝØ ÔØáÚ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "ºÞÝäØÓãàØáÐúÕ X-a"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "¸ÝáâÐÛØàÐø áØáâÕÜáÚÕ update-ÞÒÕ"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "¸×ÛÐ× Ø× ØÝáâÐÛÐæØøÕ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"¼ÐÛØ firewall ÚÞÝäØÓãàÐâÞà\n"
-"\n"
-"¾Ý ÚÞÝäØÓãàØèÕ ÛØçÝØ firewall ×Ð ÞÒã Mandrake Linux ÜaèØÝã.\n"
-"·Ð ÜÞûÝÞ firewall àeèÕúe, ßÞÓÛÕÔÐjâe\n"
-"áßÕæØjÐÛØ×ÞÒÐÝã MandrakeSecurity Firewall ÔØáâàØÑãæØjã."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"ÁÐÔÐ ûÕÜÞ ÒÐÜ ßÞáâÐÒØâØ ßØâaúÐ Þ âÞÜÕ ÚÞjÕ áÕàÒØáe ÑØ åâÕÛØ ÔÐ ÔÞ×ÒÞÛØâe\n"
-"ÔÐ áÕ ßÞÒeÖã ÝÐ ¸ÝâÕàÝÕâ.  ÀÐ×ÜØáÛØâÕ ßaÖùØÒÞ Þ ÞÒÞÜe\n"
-"ßØâaúã, jÕà jÕ ÑÕ×ÑÕÔÝÞáâ ÒaèÕÓ ÚÞÜßjãâÕàÐ ÒaÖÝa.\n"
-"\n"
-"ÃÚÞÛØÚÞ âàÕÝãâÝÞ ÝÕ ÚÞàØáâØâe jÕÔÐÝ ÞÔ ÞÒØå áÕàÒØáa, ãÚÛÞÝØâÕ firewall\n"
-"áa úØå.  ¼ÞÖÕâÕ ßàÞÜÕÝØâØ ÞÒÕ ÞßæØje ÑØÛÞ ÚÐÔa ßÞÝÞÒÝØÜ ßÞÚàÕâaúÕÜ\n"
-"ÞÒÕ ÐßÛØÚÐæØje!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ web áÕàÒÕà ÝÐ ÞÒÞj ÜaèØÝØ ÚÞjØ âàÕÑÐ ÔÐ ÑãÔe ÒØòÕÝ\n"
-"ÝÐ æÕÛÞÜ ¸ÝâÕàÝÕâã? ÃÚÞÛØÚÞ ßÞÚàeûÕâÕ webserver ÚÞjØ âàÕÑÐ ÔÐ ÑãÔe ÒØòÕÝ\n"
-"áÐÜÞ áÐ ÞÒÕ ÜaèØÝe, ÞÒÔÕ ÜÞÖÕâÕ ÔÐ ÑÕ×ÑÕÔÝÞ ÞÔÓÞÒÞàØâe ½E.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ name áÕàÒÕà ÝÐ ÞÒÞj ÜaèØÝØ? ÃÚÞÛØÚÞ ÝØáâÕ ßÞÔÕáØÛØ jÞè "
-"jÕÔÐÝ\n"
-"×Ð away IP Ø ×ÞÝáÚÕ ØÝäÞàÜÐæØjÕ ×Ð æÕÛØ ¸ÝâÕàÝÕâ, ÜÞÛØÜ\n"
-"ÒÐá ÔÐ ÞÔÓÞÒÞàØâÕ Ýe.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ÔÞ×ÒÞÛØâÕ Secure Shell (ssh) ÚÞÝÕÚæØje? ¾ÒÞ\n"
-"jÕ ×ÐÜÕÝÐ ×Ð âÕÛÝÕâ ÚÞjã ÜÞÖÕâÕ ÚÞàØáâØâØ ×Ð ßàØjÐÒã. ÃÚÞÛØÚÞ ÚÞàØáâØâe\n"
-"âÕÛÝÕâ, âàÕÑÐÛØ ÑØ ÔÐ áÕ ßàÕÑÐæØâÕ Ýa ssh. ÂÕÛÕÝeâ ÝØje\n"
-"ÕÝÚàØßâÞÒÐÝ -- âÐÚÞ ÔÐ ÝÕÚØ ÝÐßÐÔaçØ ÜÞÓã ãÚàÐáâØ ÛÞ×ØÝÚã ãÚÞÛØÚÞ je\n"
-"ÚÞàØáâØâe. ssh jÕ ÕÝÚàØßâÞÒÐÝ Ø ÝÕ ÔÞ×ÞÒÞùÐÒÐ ÞÒÐÚÒÕ áâÒÐàØ."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"´Ð ÛØ ÖÕÛØâÕ ÔÐ ÔÞ×ÒÞÛØâÕ telnet ÚÞÝÕÚæØje?\n"
-"¾ÒÞ jÕ ãÖÐáÝÞ ÝÕáØÓãÝÞ, ÚÐÚÞ áÜÞ Ø ÞÑjÐáÝØÛØ ÝÐ ßàÕâåÞáÝÞÜ ÕÚàÐÝã. ¼Ø\n"
-"ÒÐÜ ßàÕßÞàãçãjÕÜÞ ÔÐ ÞÒÔÕ ÞÔÓÞÒÞàØâÕ ½E Ø ÔÐ ÚÞàØáâØâÕ ssh ãÜÕáâÞ\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ FTP áÕàÒÕà ÚÞjØ ÒÐÜ jÕ ßÞâàÕÑÐÝ\n"
-"×Ð ¸ÝâÕàÝÕâ? ÃÚÞÛØÚÞ âÞ àÐÔØâe, ßàÕßÞàãçãjÕÜÞ ÓÐ ÚÞàØáâØâe áÐÜÞ ×a\n"
-"Anonymous âàÐÝáäÕàe. ±ØÛÞ ÚÞjÐ ÛÞ×ØÝÚa ßÞáÛÐâÐ ßàÕÚÞ FTP ÜÞÖÕ ÑØâØ\n"
-"ÜÕâÐ ÝÐßÐÔaçÐ, ßÞèâÞ  FTP âÐÚÞòÕ ÚÞàØáâØ ÝÕÚàØâÞÒÐÝe ÛÞ×ØÝÚe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ mail áÕàÒÕà? ÃÚÞÛØÚÞ èaùÕâÕ ßÞàãÚÕ ßàÕÚÞ\n"
-"pine, mutt ØÛØ ÝÕÚÞÓ ÔàãÓÞÓ âÕÚáâãÐÛÝÞÓ mail ÚÛØjÕÝâa,\n"
-"ÞÝÔÐ âÞ ÒÕàÞÒÐâÝÞ ÚÞàØáâØâe.  ¸Ýaçe, âàÕÑÐÛØ ÑØ Ôa ãÚÛÞÝØâÕ firewall ×Ð "
-"ÞÒÞ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"´Ð ÛØ ßÞÚàeûÕâÕ POP ØÛØ IMAP áÕàÒÕà? ¾ÒÞ ÑØ ÚÞàØáâØÛØ \n"
-"×Ð host-ÞÒaúe non-web-ÑÐ×ØàÐÝØå  mail àaçãÝa ×Ð ùãÔe ßàÕÚÞ\n"
-"ÞÒÕ ÜaèØÝe.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"¸×ÓÛÕÔÐ ÔÐ ÚÞàØáâØâÕ 2.2 ÚÕàÝÕÛ.  ÃÚÞÛØÚÞ jÕ Òaè ÜàeÖÝØ IP\n"
-"ÐãâÞÜÐâáÚØ ßÞÔeèÕÝ ×Ð ÚÞÜßjãâÕà ã ÒaèÞj ÚãûØ ØÛØ ÝÐ ßÞáÛã \n"
-"(ÔÞÔeùÕÝÞ ÔØÝÐÜØçÚØ), âàÕÑÐ ÔÐ ÓÐ ÞÜÞÓãûØÜÞ ×Ð ÞÒÞ.  ´a\n"
-"ÛØ jÕ ÞÒÞ ã ßØâaúã?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"´Ð ÛØ Òaè ÚÞÜßjãâÕà ÔÞÑØjÐ ÒàÕÜÕ áØÝåàÞÝØ×ÞÒÐÝÞ áa ÔàãÓØÜ ÚÞÜßjãâÕàÞÜ?\n"
-"ÃÓÛÐÒÝÞÜ áÕ ÞÒÞ ÚÞàØáâØ Ýa áàÕÔúØÜ-ÒÕÛØÚØÜ Unix/Linux ÞàÓÐÝØ×ÐæØjÐÜa\n"
-"àÐÔØ áØÝåàÞÝØ×ÐæØjÕ ÒàÕÜÕÝÐ ßàØjÐÒÕ ØÛØ ×Ð áÛØçÝÕ áâÒÐàØ.  ÃÚÞÛØÚÞ ÝØáâÕ "
-"ÔÕÞ\n"
-"ÒÕÛØÚÕ äØàÜÕ ØÛØ ÝØáâÕ çãÛØ ×Ð ÞÒÞ, ÞÝÔÐ ×ÐÞÑØòØâe \n"
-"ÞÒÞ."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"ºÞÝäØÓãàÐæØjÐ ×ÐÒàèÕÝÐ. ´Ð ÛØ ÔÐ ×ÐßØèÕÜÞ ÞÒÕ Ø×ÜÕÝÕ ÝÐ ÔØáÚ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "½Õ ÜÞÓã ÔÐ ÞâÒÞàØÜ  %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "½Õ ÜÞÓã ÔÐ ÞâÒÞàØÜ %s àÐÔØ ãßØáa: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Firewalling ÚÞÝäØÓãàÐæØja"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "ÁaÜÞ ÜÞÜÕÝÐâ, ßàØßàÕÜÐÜ ØÝáâÐÛÐæØøã"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "ÁÕàÒÕà, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "¼àeÖÝØ ÚÞÜßjãâÕà, (ÚÛØjÕÝâ)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS áÕàÒÕà, SMB áÕàÒÕà, Proxy áÕàÒÕà, SSH áÕàÒÕà"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome àÐÔÝa áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "°ÛÐâØ ×Ð Palm Pilot ØÛØ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "ÀÐÔÝÐ áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "ÁÕàÒÕà, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "¸ÜÕ ´ÞÜÕÝÐ Ø ¼àÕÖÝØ ¸ÝäÞàÜÐæØÞÝØ ÁÕàÒÕà"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office ßàÞÓàÐÜØ: âÕÚáâ ßàÞæÕáÞàØ (kword, abiword), âÐÑÕÛe (kspread, "
-"gnumeric), pdf ßàÕÓÛÕÔÝØæØ, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "°ãÔØÞ aÛÐâØ: mp3 ØÛØ midi ßÛÕjÕàØ,ÜØÚáÕàØ, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "KúØÓÕ Ø ºÐÚÞ? (Howto's) ×Ð Linux Ø ±ÕáßÛÐâÝØ ÁÞäâÒÕà"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE ßÐÔÝÐ áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¼ãÛâØÜÕÔØja - ²ØÔÕÞ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "ÁÕâ ÐÛÐâÐ ×Ð ÕÛ.ßÞèâã, ÒÕáâØ, web, âàÐÝáäÕà ÔÐâÞâÕÚa, ØÛØ chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "ÁÕàÒÕà,±Ð×Õ ßÞÔÐâÐÚa"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ØÛØ MySQL áÕàÒÕà ×Ð ÑÐ×ã ßÞÔÐâÐÚÐ"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "°ÛÐâØ ×Ð ÛÐÚÞ ÚÞÝäØÓãàØáaúÕ ÚÞÜßjãâÕàa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¼ãÛâØÜÕÔØja - ·ÒãÚ"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "´ÞÚãÜÕÝâÐæØja"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "ºÞÝ×ÞÛÝØ ÐÛÐâØ"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail áÕàÒÕà, Inn news áÕàÒÕà"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "¸ÝâÕàÝÕâ áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¼ãÛâØÜÕÔØjÐÛÝÐ áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "ºÞÝäØÓãàÐæØøa"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "JÞè ÓàÐäØçÚØå ÞÚàãÖeúa (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K ´ÕáÚâÞß ÞÚàãÖeúÕ, ÞáÝÞÒÝÞ ÓàÐäØçÚÞ ÞÚàãÖeúÕ áa ÚÞÛÕÚæØjÞÜ ßàÐâeûØå ÐÛÐâa"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "³àÐäØçÚÞ ¾ÚàãÖeúe"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "°ÛÐâØ ×Ð ÚàÕØàaúÕ Ø ßàÖeúÕ CDa"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "ÀÐÔÝÐ(Office) áâÐÝØæa"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "ÁÕàÒÕà"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "³àÐäØçÚØ ßàÞÓàÐÜØ ÚÐÞ èâÞ jÕ Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C Ø C++ àÐ×ÒÞjÝÕ ÑØÑÛØÞâÕÚe, ßàÞÓàÐÜØ  Ø ßàÞßàÐâÝÕ ÔÐâÞâÕÚe"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "¼àÕÖÝØ ÁÕàÒÕà"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "ÁÕàÒÕà, µÛ.ßÞèâÐ/Groupware/²ÕáâØ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "ÁâÐÝØæÐ ×Ð ØÓàã"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "²ØÔÕÞ ßÛÕjÕàØ Ø ÕÔØâÞàØ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¼ãÛâØÜÕÔØja - ³àÐäØÚa"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "·ÐÑÐÒÝØ ßàÞÓàÐÜØ: ÐàÚÐÔÕ, ØÓÕ ÝÐ âÐÑÛØ, áâàÐâÕÓØjÕ, ØâÔ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"ÁÚãß ÐÛÐâÐ ×Ð çØâaúÕ Ø áÛaúÕ ÕÛ.ßÞèâÕ Ø ÒÕáâØ (pine, mutt, tin..) Ø ×Ð "
-"ßàÕâàaÖØÒaúe ¸ÝâÕàÝÕâa"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "»ØçÝÕ äØÝÐÝáØje"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"³àÐäØçÚÐ ÞÚàãÖeúÐ ×Ð áÕâÞÜ ÚÞàØáÝØçÚNFS server, SMB server, Proxy serverNFS "
-"server, SMB server, Proxy serverØå ÐßÛØÚÐæØjÐ Ø ÔÕáÚâÞßÐÛÐâa"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ºÛØjÕÝâØ ×Ð àÐ×ÛØçØâÕ ßàÞâÞÚÞÛÕ ãÚùãçãjãûØ Ø ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "¸ÝâÕàÝÕâ gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "¿àÞÓàÐÜØ ×Ð ßãèâaúÕ ×ÒãÚa Ø ÒØÔÕa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "´àãÓØ ÓàÐäØçÚØ ÔÕáÚâÞßÞÒØ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "ÕÔØâÞàØ,èÕÛÞÒØ, ÐÛÐâØ ×Ð ÔÐâÞâÕÚÕ, âÕàÜØÝÐÛØ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "¿àÞÓàÐÜØ ×Ð ãßàÐÒùaúÕ ÒaèØÜ äØÝÐÝáØjÐÜa, ÚÐÞ èâÞ jÕ gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "ÃßàÐÒùaúÕ ßàØÒÐâÝØÜ ØÝäÞàÜÐæØjÐÜa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¼ãÛâØÜÕÔØja - CD ßàÖeúÕ"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "½ÐãçÝa àÐÔÝÐ áâÐÝØæa"
diff --git a/perl-install/share/po/sr.po b/perl-install/share/po/sr.po
deleted file mode 100644
index a66d77b3b..000000000
--- a/perl-install/share/po/sr.po
+++ /dev/null
@@ -1,12449 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999,2000,2001 Mandrakesoft
-# Jankovic Tomislav <tomaja@net.yu> 1999,2000,2001
-#
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-04 19:39GMT+1\n"
-"Last-Translator: Toma Jankovic_<toma@mandrake.co.yu>\n"
-"Language-Team: Serbian <office@mandrake.co.yu>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Podesi sve glave nezavisno"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Podesi samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Va¹ sistem podr¾ava multiple head konfiguraciju.\n"
-"Da li to ¾elte da uradite?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafièka kartica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izaberite karticu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju XFree konfiguraciju ¾elite da imate ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a kartica mo¾e imati 3D hardversku akceleraciju ali samo sa XFree %s.\n"
-"Va¹u karticu podr¾ava XFree %s koji mo¾e imati bolju podr¹ku i za 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Va¹a kartica mo¾e imati 3D hardversku akceleraciju sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskom akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Va¹a kartica mo¾e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
-"ZAPAMTITE da je ovo EKSPERIMENTALNA podr¹ka za 3D i mo¾e dovesti do "
-"blokiranja raèunara."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNOM 3D hardverskom akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Va¹a kartica mo¾e imati 3D hardversku akceleraciju ali samo sa XFree %s,\n"
-"ZAPAMTITE da je ovo EKSPERIMENTALNA podr¹ka za 3D i mo¾e dovesti do "
-"blokiranja raèunara.\n"
-"Va¹u karticu podr¾ava XFree %s koji mo¾e imati bolju podr¹ku i za 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Instalacija displej drajver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Kolièina memorije na grafièkoj kartici"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Opcije za server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Morate da navedete horizontalni sinhronizacioni opseg va¹eg monitora.\n"
-"Mo¾ete ga ili izabrati iz unapred zadatih vrednosti koje odgovaraju\n"
-"industrijskim standardima monitora, ili da navedete odreðeni opseg.\n"
-"\n"
-"VEOMA JE VA®NO da ne navedete tip monitora koji ima ovaj opseg veæi nego\n"
-"¹to ga ima va¹ monitor. Ako niste sigurni, odaberite manje vrednosti."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna frekvencija"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalna frekvencija"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor nije konfigurisan"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafièka karta jo¹ nije konfigurisana"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolucija jo¹ nije izabrana"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Da li hoæete da testirate konfiguraciju?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Upozorenje: testiranje ove grafièke kartice mo¾e zamrznuti va¹ kompjuter"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"poku¹ajte sa promenom parametara"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Hm, gre¹ka:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Izlaz za %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno pode¹eno?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hm, pojavila se gre¹ka, probajte da promenite parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i broj boja pri prikazu"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafièka kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Jo¹"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "U redu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Prika¾i sve"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tip tastature: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip mi¹a: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mi¹ je postavljen na ureðaj: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor - horizontalna frekvencija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor - vertikalno osve¾avanje: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafièka kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafièke kartice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memorija na grafièkoj kartici: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Broj boja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Provera konfiguracije za X-Window sistem"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "©ta ¾elite da uradite?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Promena monitora"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Promena grafièke kartice"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Promena Server opcija"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Promena rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Prika¾i informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testiraj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Kraj"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Saèuvaj promene?\n"
-"Trenutna konfiguracija je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X okru¾enje na startu"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ja mogu podesti va¹ raèunar da automatski podi¾e X okru¾enje pri startanju.\n"
-"Da li ¾elite X okru¾enje pri restartu ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molim, ponovo unesite %s radi aktiviranja promena"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim va¹ izlogujte se i restartujte (Ctrl-Alt-BackSpace) raèunar"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljade boja (15-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32-bitna paleta)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ili vi¹e"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompat., 1024x768 na 87 Hz sa preplitanjem (ne 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA bez preplitanja, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visokofrekventni SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor koji radi sa 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji radi sa 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji radi sa 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor startne particije"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gde biste da instalirate starter?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafièkim menijem"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Startanje iz DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne opcije startera"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Starter koji æe se koristiti"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalacija startera"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Startni (boot) ureðaj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOS-ima)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Pauza pre startanja default image-a"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Lozinka"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Lozinka (ponovite)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ogranièena komandna linika - opcije"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ogranièeno"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Oèisti /tmp pri svakom startanju"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Defini¹i velièinu RAM ako je potrebno (detektovano je %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omoguæi multi-profile"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Prika¾i velièinu RAM-a u Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opcija``Ogranièena komandna linika - opcije'' je neupotrebljiva bez lozinke"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Probajte ponovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Nepodudarnost lozinki"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Inicijalna poruka"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Otpoèni Firmware pauzu"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Pauza pri startanju kernela"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Omoguæi startanje sa CD-a?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Omoguæi OF startanje?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Podrazumevani OS ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ovo su postavljne opcije.\n"
-"Mo¾ete dodati nove ili izmeniti stare."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Uraðeno"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Promeni"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu unosa dodajete ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Drugi OS-ovi (SunOS,BSD,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Drugi OS-ovi (MacOS,BSD,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Drugi OS-ovi (Windows,BSD,BeOS,...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Slika"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Dodatak"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Èitanje-pisanje RW"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Oznaka"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Podrazumevano"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-velièina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Uklanjam unos"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Morate specificirati kernelov image"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Morate odrediti root particiju"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ova oznaka je veæ u upotrebi"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronaðeno  %s %s interfejsa"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Da li imate jo¹ jedan?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li jo¹ %s interfejsa?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Pogledaj informacije o hardveru"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver da probam?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim sluèajevima, drajver %s zahteva dodatne informacije\n"
-"za pravilan rad, mada mo¾e lepo da radi i bez njih. Da li hoæete\n"
-"sami da unesete dodatne podatke za njega, ili da ih drajver sam odredi?\n"
-"Moguæe je da æe proba zaglaviti va¹ raèunar, ali neæe naneti nikakvu ¹tetu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatska proba"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Navedite opcije"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Mo¾ete navesti njegove opcije za modul %s.\n"
-"Opcije su u formatu ``ime=vrednost ime2=vrednost2 ...''.\n"
-"Na primer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcije modula:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Podizanje modula %s neuspelo.\n"
-"Da li ¾elite poku¹ate ponovo sa drugim parametrima ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pristup administrativnim fajlovima"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s veæ postoji)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ova lozinka je previ¹e prosta"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Odredite korisnièko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisnièko ime mo¾e sadr¾ati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ovo korisnièko ime veæ postoji"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesi korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Korisnièko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Auto logovanje"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ja mogu podesti va¹ raèunar da automatski uloguje jednog korisnika.\n"
-"Da li ¾elite da korisitite ovu opciju ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izaberite default (osnovnog) korisnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window menadzer koji ¾elite da koristite:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "IZaberite koji jezik ¾elite da korisitite."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Mo¾ete izabrati drugi jezik koji æe biti dostupan posle instalacije "
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Sve"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dozvoli sve korisnike"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Izbor po ¾elji"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nema zajednièkog deljenja"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s mora biti instaliran. Da li ¾elite da ga instalirate?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Mo¾ete eksportovati koristeæi NFS ili Samba-u. Koji od ova dva ¾elite"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Tekuæi paket %s nedostaje"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Obustavi"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dobro¹li kod Krakera"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Bedna"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardni"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Velika"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Velika"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidna"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Na ovom nivou treba obratiti pa¾nju. On pravi va¹ sistem lak¹im\n"
-"za upotrebu, ali i  veoma osetljivim: ne sme biti kori¹ten na ma¹ini\n"
-"koja je povezana sa drugim ma¹inama ili na internet. Ovde ne postoji\n"
-"pristup sa lozinkom."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lozinke su sada omoguæene, ali se i dalje ne preporuèuje da se koristi\n"
-"kao mre¾ni raèunar."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardno sigurnosno okru¾enje preporuèeno za raèunare\n"
-"koji  æe biti  kor¹æeni za vezu sa Internetom ili kao klijent.\n"
-"Ne postoje sigurnosne provere."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Sa ovim sigurnosnim nivoom, kori¹æenje ovog sistema kao servera\n"
-"postaje moguæe. Sigurnost je sada dovoljno velika za kori¹æenje\n"
-"ma¹ine za server koji prihvata konekcije brojnih klijenata."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ukljuèujete nivo 4 opcija, ali je sada sistem potpuno zatvoren.\n"
-"Sigurnosne opcije su maksimalne."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izaberite sigurnosni nivo"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sigurnosni nivo"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Biblioteka koja ¹titi od buffer overflow-a i format string napada."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobrodosli u %s, menadzer za startanje operativnih sistema !\n"
-"\n"
-"Izaberite operativni sistem, ili\n"
-"sacekate %d sekundi za startanje pretpostavljenog OS.\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobrodosli u GRUB  starter operativnog sistema !"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristi  %c i %c slova da bi oznacili izbor"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za podizanje izabranog OS,'e' za promenu "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi pri  podizanju sistema,ili  'c' za komandnu liniju "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Oznaceni izbor se podize automatski za %d sekundi"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nema dovoljno mesta u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start meni "
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne mo¾ete da instalirate starter na particiju %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoæ jo¹ nije implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila startanja"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Monitor za kategorizaciju"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Auroru pri startanje"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub mod"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao Boot menad¾er \n"
-"Kliknite na Podesi (Configure) da bi pokrenuli pode¹avavanje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemski mod"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sistem pri stratanju"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ja ne ¾elim autologovanje"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, ja ¾elim autologovanje sa ovim(korisnik,desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "U redu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za èitanje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu da napravim snimak pre particioniranja"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Snimci æe biti dostupni nakon instalacije u %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francuska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kostarika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgija"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Èe¹ka"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Nemaèka"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grèka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norve¹ka"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "©vedska"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holandija"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italija"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "SAD"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Molim vas, prvo napravite kopiju va¹ih podataka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "PA®LJIVO PROÈITAJ !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ukoliko planirate da koristite  aboot, ostavite prazan prostor (2048 "
-"sektorana poèetku \n"
-"diska)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Gre¹ka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "èarobnjak (pomoænik)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Disk sadr¾i jednu veliku FAT particiju\n"
-"(uglavnom je koriste MicroSoft Dos/Windows-i, na ¾alost).\n"
-"Predla¾em da prvo izmenite veliènu (resize) te particije (kliknite na nju,\n"
-"a potom na \"Promeni velièinu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Drugo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Vrsta fajl sistema:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Kreiraj"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Umesto toga probajte ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Obri¹i"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Prvo uradite ``Demontiraj''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Posle promene tipa particije %s, svi podaci na ovoj particiji æe biti "
-"izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izaberite particiju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izaberite drugu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Preði na ekspert mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Preði na normalni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Poni¹ti radnju"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Svejedno nastaviti ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Kraj bez snimanja promena"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Kraj bez snimanja promena u tabele particija?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Da li hoæete da saèuvate izmene u /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto dislociranje"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Oèisti sve"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su zauzete"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati vi¹e ni jednu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Da bi omoguæili kreiranje jo¹ (extended) particija izbri¹ite jednu od "
-"postojeæih"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Saèuvaj tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Obnovi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ponovo uèitaj tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automontiranje prenosivog medija"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izaberite datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Pohranjena(snimljena) tabela particija nije iste velièine\n"
-"®elite da nastavite ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ubacite disketu u ureðaj\n"
-"Svi podaci na disketi æe biti izbrisani !"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Spasavanje tabele particija"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Taèka montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Promeni velièinu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premesti"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiranje"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAID-a"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVM-a"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Promeni RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Kreiraj novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Poèetni sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Velièina u MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Vrsta tatoteènog sistema:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Taèka montiranja: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Karakteristike: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ukloni loopback fajl ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Promena tipa particije"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Koju  datoteèni sistem ¾elite ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Menjam ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gde biste da montirate loopback datoteku  %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gde biste da montirate %s ureðaj ?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Demontiranje nije moguæe,jer se particija korisiti za loop back.\n"
-"Prvo uklonite loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Proraèunavam granice FAT datoteènog sistema"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Promena velièine (resizing)"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ovoj particici nije moguæe promeniti velièinu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Cvi podaci na ovoj particiji bi trebali biti saèuvani"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Posle promene velièine %s particije svi podaci æe biti izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Izaberite novu velièinu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nova velièina u MB:"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Koji disk ¾elite da premestite?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Gde ¾elite da instalirate starter?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Preme¹tanje"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Preme¹tanje particije..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberi postojeæi RAID za dodavanje"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberi postojeæi LVM za dodavanje"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ime?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija ne mo¾e biti kori¹æena za loopback "
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Ime Loopback datoteke: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Odredite ime fajla"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Fajl se veæ koristi od strane drugog loopback-a,izaberite drugi"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka veæ postoji.Da li da ga koristim ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Razno"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ureðaj"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivo"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "chunk velièina"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "PA®LJIVO,ova operacija je opasna."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Nije moguæe kreirati /boot za sada na hard disku (na cilindru > 1024).\n"
-"Ili koristite LILO koji ne radi, ili ga ne koristite pa vam ne treba /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particija koju ste izabrali za root (/) je fizièki locirana iznad\n"
-"1024-tog cilindra hard diska,i nemate /boot particiju.\n"
-"Ukoliko planirate da korisitite LILO boot menad¾er, morate\n"
-"dodati /boot particiji."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan starter ne mo¾e da radi sa tim bez /boot particije.\n"
-"Zato pazite da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za ureðaj %s æe biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Morate restartovati raèunar da bi se izmene izvr¹ile"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Posle formatiranja particije %s,svi podaci na ovoj particiji æe biti "
-"izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiranje"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiranje loopback datoteke %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiranje particije %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sakrij fajlove"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Premesti fajlove na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorijum %s veæ sadr¾i neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Preme¹tanje fajlova na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiranje %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjanje: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je sada poznata kao %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Ureðaj: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Oznaka DOS particije: %s (samo pretpostavka)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Unesi: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Poèetak: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Velièina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do cilindra %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nije formatirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montirano\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback fajl(ovi): \n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Boot particija po default-u\n"
-"   (za podizanje MS-DOSa, ne za lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk-uj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Ime Loopback datoteke: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Najverovatnije je, da je ova particija\n"
-"Driver particija, pa nebi trebali\n"
-"da je dirate.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ovo je specijalna Bootstrap\n"
-"particija i koristi se\n"
-"dual-booting va¹eg sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velièina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na busu %d ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Kljuè za enkripciju fajl sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite kljuè za enkripciju fajl sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova lozinka(enkripcioni kljuè) je suvi¹e jednostavna (treba da ima bar %d "
-"znakova)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Nepodudarnost enkripcionih kljuèeva (lozinki)"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Kljuè za enkripciju"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Kljuè za enkripciju (ponovo)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Promena tipa"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Kliknite na medij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS server"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s Formatiranje  %s nije uspelo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne znam kako da formatiram %s u tipu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck provera nije uspela sa kodom %d ili signalom %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Gre¹ka pri demontiranju %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne mo¾ete koristiti JFS za particije manje od 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne mo¾ete koristiti ReiserFS za particije manje od 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Taèke montiranja moraju da poèinju sa vodeæim /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Veæ postoji particija sa taèkom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne mo¾ete koristiti logièku LVM particiju za taèku montiranja %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorijum treba da ostane u root-u  datoteènog sistema"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Potreban vam je pravi datoteèni sistem (ext2, reiserfs) za ovu taèku "
-"montiranja\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ne mo¾ete koristiti enkriptovani fajl sistem za taèku montiranja %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno slobodnog prostora za auto-alociranje"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nema ¹ta da se uradi"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gre¹ka pri otvaranju %s za ispis: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Dogodila se gre¹ka - nije naðen ispravan ureðaj na kojem bi bili krerani "
-"novi datoteènog sistemi. Proverite va¹ hardver da vidite ¹ta je uzrok ovog "
-"problema."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemate nijednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je vi¹ekorisnièki sistem, a to znaèi da svaki korisnik mo¾e imati "
-"sopstvene\n"
-"postavke, sopstvene fajlove, itd. Mo¾ete proèitati ``Upustvo za korisnike''\n"
-"da bi saznali vi¹e o tome. Ali za razliku od \"root\", koji je ustvari "
-"administrator, korisnici\n"
-"koje dodate ovde neæe moæi da menjaju bilo ¹ta osim njihovih\n"
-"fajlova i njihove konfiguracije. Trebalo bi da kreirate najmanje jednog\n"
-"obiènog korisnika za sebe. Taj raèun je onaj na koji treba da se logujete \n"
-"za rutinsko kori¹æenje. Iako je veoma praktièno da se ulogujete kao \"root\" "
-"svaki dan,\n"
-"to mo¾e biti veoma opasno! I najmanja gre¹ka mo¾e znaèiti da va¹ sistem\n"
-"neæe vi¹e raditi. Ukoliko napravite ozbiljne gre¹ke kao obièni korisnik \n"
-"mo¾ete jedino izbgubiti ne¹to informacija, ali ne i celi sistem.\n"
-"\n"
-"Prvo, morate da unesete va¹e pravo ime. Ovo nije neophodno, naravno -\n"
-"jer mo¾ete pristupiti i izmeniti ga kada god ¾elite. DrakX æe tada uzeti "
-"prvu\n"
-"reè koji ste uneli i staviti ga u prostor za uno¹enje imena korisnika "
-"\"User\n"
-"name\". Ovo je ime koje odre¾eni korisnik treba da koristi pri logovanju na\n"
-"sistem. Mo¾ete ga promeniti. YNakon toga morate uneti lozinku ovde.\n"
-"Obièni, ne-privilegovani korisnièka lozinka nije od veæeg znaèaja kao ona "
-"za\n"
-"\"root\" koriosnika sa sigurnosne taèke gledanja, ali to nije razlog za "
-"opu¹tanje\n"
-"- nakon svega, va¹i fajlovi su u pitanju.\n"
-"\n"
-"Ukoliko kliknete na Prihvati korisnika \"Accept user\", mo¾ete dodati jo¹ "
-"korisnika. Dodajte\n"
-"korisnika za svakog va¹eg prijatelja: za va¹eg oca ili sestru, na\n"
-"primer. Kada zar¹ite dodavanje svih ¾eljenih korisnika, izaberite Zvr¹eno "
-"\"Done\".\n"
-"\n"
-"Klikom na taster Napredno \"Advanced\" mo¾ete izmeniti default \"shell\"\n"
-"za trenutnog korisnika (bash po default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Iznad se nalazi lista postojeæih Linux particija koje su detektovane\n"
-"na hard disku. Mo¾ete zadr¾ati izbor koji je napravio èarobnjak, jer je "
-"dobar za a\n"
-"op¹tu upotrebu. Ukoliko promenite izbor, morate bar izabrati root\n"
-"particiju (\"/\"). Nemojte da birate suvi¹e malu particiju jer neæete moæi "
-"da\n"
-"instalirate ovoljno softvera. Ukoliko ¾elite da podatke staviljate na "
-"posebnu particiju ,\n"
-"morate da izaberetei i \"/home\" (moguæe je ukoliko imate vi¹e od jedne\n"
-"Linux particije).\n"
-"\n"
-"\n"
-"Informacija: svaka particija je prikazana na sledeæi naèin: \"Ime\", "
-"\"Kapacitet\".\n"
-"\n"
-"\n"
-"\"Ime\" je kodirano na sledeæi naèin: \"tip hard diska\", \"broj hard diska"
-"\",\n"
-"\"proj particije\" (na primer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk IDE ureðaj i  \"sd\"\n"
-"ukoliko je SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Za IDE hard "
-"diskove:\n"
-"\n"
-"   * \"a\" znaèi  \"master hard disk na primarnom  IDE kontroleru\",\n"
-"\n"
-"   * \"b\" znaèi \"slave hard disk na primarnom IDE kontroloeru\",\n"
-"\n"
-"   * \"c\" znaèi \"master hard disk na sekundranom IDE kontroloeru\",\n"
-"\n"
-"   * \"d\" znaèi \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, a \"a\" znaèi \"primarni hard disk\", a \"b\" znaèi "
-"\"sekundarni hard disk \", itd..."
-
-#: ../../help.pm_.c:72
-#, fuzzy
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalacija se nalazi na nekoliko diskova iliti CDROM-ova. "
-"DrakX\n"
-"zna ukoliko da ukoliko je selktovani paket lociran na drugom CDROM-u i "
-"izbaciæe\n"
-"ctrenutni  CD te tra¾iti od vas da ubacite odgovarajuæi."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sada je vreme da odredimo koje programe ¾elite da instalirate na va¹\n"
-"sistem. Postoje hiljade paketa dostupnih za instalaciju na Mandrake Linux, "
-"i \n"
-"predpostavljamo da ne morate da ih sve poznajete, naravno.\n"
-"\n"
-"Ukoliko izvodite standardnu instalaciju sa CDROM-a, prvo æete biti\n"
-"upitani da da specificirate koje CD-ove imate (samo u Expert modu). "
-"Proverite\n"
-"oznake na CD-ovima i oznaèite one koje posedujete\n"
-"za instalaciju. Kliknite na U redu \"OK\" kada ste spremni da nastavite.\n"
-"\n"
-"Paketi su sortirani u grupe u odnosu na odgovarajuæu upotrebu na va¹oj\n"
-"ma¹ini. Same grupe su sortirane u èetiri sekcije:\n"
-"\n"
-" * \"Radna stanica\": ukoliko planirate da koristite va¹u ma¹inu kao radnu "
-"stanicu, izaberite\n"
-"jednu ili vi¹e odgovarajuæih grupa.\n"
-"\n"
-" * \"Razvoj\": ukoliko ma¹ina treba da se koristi za programiranje, "
-"izaberite ¾eljenu(e)\n"
-"grupu(e).\n"
-"\n"
-" * \"Server\": ukoliko æe se ma¹ina koristiti kao server, moæi æete da \n"
-"izaberete koje od najèe¹æih servisa¾elite da instalirate na\n"
-"ma¹inu.\n"
-"\n"
-" * \"Grafièko Okru¾enje\": na kraju, ovde æete izabrati va¹e\n"
-"omiljeno grafièko okru¾enje. Morate izabrati bar jedno da bi imali\n"
-"grafièku radnu stanicu!\n"
-"\n"
-"Kretanjem kursora mi¹a preko imena grupe dobiæete kratko obja¹njenje\n"
-"o toj grupi. Ukoliko ne selektujete ni jednu grupu kada izvodite\n"
-"osnovnu instalaciju (za razliku od a¾uriranja), pojaviæe se dijalog\n"
-"sa razlièitim predlozima za minimalnu instalciju:\n"
-"\n"
-" * Instaliraæe minimano potrebno za rad Linux sistema,\n"
-"naravno samo u komandnoj liniji.\n"
-"\n"
-" * Instalira osnovni sistem plus osnovne alate\n"
-"\n"
-" * Instalira nekoliko paketa radi grafièkog desktopa\n"
-"\n"
-"Mo¾ete selektovati i Pojedinaèno biranje paketa \"Individual package "
-"selection\", koje je korisno ukoliko\n"
-"su vam poznati ponuðeni paketi i ¾elite da imate potpunu \n"
-"kontrolu nad svim ¹to æe biti instalirano.\n"
-"\n"
-"Ukoliko ste pokrenuli a¾uriranje ili \"Upgrade\" mod, mo¾ete deselektovati "
-"sve\n"
-"grupe da bi izbegli instalaciju bilo kog novog paketa. Ovo je korisno za "
-"popravljanje ili\n"
-"a¾uriranje postojeæeg sistema."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Na kraju, u zavisnosti od va¹eg izbora da da birate pojedinaène pakete\n"
-"ili ne, biæe vam prikazano stablo sa svim paketima klasifikovanim\n"
-"po grupama i podgrupama. Dok pretra¾ujete stablo, mo¾ete selektovati cele\n"
-"grupe, podgrupe, ili individualne pakete.\n"
-"\n"
-"Kada kod selektujete paket na stablu, opis se pojavljuje sa desne\n"
-"strane. Kada je va¹a selekcija zavr¹ena, kliknite na Instalacija \"Install\" "
-"taster koji\n"
-"æe pokreuti instalacioni proces. U zavisnosti brzine va¹eg\n"
-"hardvera i broja paketa koje treba da se instaliraju, instalacija mo¾e\n"
-"i potrajati. Procenjeno vreme do zavr¹etka instalacije je prikazano\n"
-"na ekranu da bi vam pomoglo da vi¹ak vremena iskoristite da popijete ¹olju "
-"èaja ili\n"
-"kafe.\n"
-"\n"
-"!! Ukoliko je server paket izabran sluèajno ili kao deo\n"
-"cele grupe, biæete upitani da li zaista ¾elite da instalirate\n"
-"ponuðene servere. Pod Mandrake Linux-om, svi instalirani\n"
-"serveri se startuju po default-u za vreme podizanja sistema. Èak i ako su "
-"sigurni i nemaju\n"
-"poznatih bezbednosnih propusta do vremena izlaska distribucije, mo¾e se "
-"desiti\n"
-"da sigurnosne rupe budu otkivene kasnije.\n"
-" Ukoliko ne znate koji pojedinaèni servis ¹ta treba da radi\n"
-"ili za¹to se instalira, onda kliknite \"Ne\". Klikom na \"Da\" æete\n"
-"instalirati prikazane servis i oni æe biti pokrenuti automatski po\n"
-"default-u. !!\n"
-"\n"
-"Opcija Automatske zavisnosti ili \"Automatic dependencies\" jednostavno "
-"iskljuèuje dijalog sa upozorenjem\n"
-"koji se javlja svaki put kada instaer automatski selektuje pakete. Ovo se\n"
-"javlja zato ¹to on odreðuje da mora da zadovolji zavisnosti sa drugim\n"
-"paketom da bi uspe¹no zavr¹io instalaciju.\n"
-"\n"
-"Mala ikonica flopi diska na dnu liste vam omoguæava da uèitate\n"
-"listu paketa birane tokom prethodne instalacije. Klikom na ovu ikonicu\n"
-"æe od vas biti tra¾eno da ubacite disketu kreiranu ranije na kraju \n"
-"prethodne instalacije. Pogledajte poslednji pasus (korak) da bi nauèili kako "
-"da kreirate \n"
-"takvu disketu."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Ukoliko ¾elite da pove¾ete va¹ raèunar na Internet ili na lokalnu mre¾u,\n"
-"izaberite ispravne opcije. Ukljuèite va¹e ureðaje pre izbora\n"
-"opcija da bi DrakX mogao da ih detektuje automatski.\n"
-"\n"
-"Mandrake Linux nudi pode¹avanje Internet konekcije u\n"
-"toku instalacije. Moguæe konekcije su: tradicionalni modem, ISDN\n"
-"modem, ADSL konekcija, kablovski modem, i na kraju jednostavna LAN "
-"konekcija\n"
-"(Ethernet).\n"
-"\n"
-"Ovde neæemo detaljno opisivati svaku konfiguraciju. Jednostavno proverite da "
-"li imate\n"
-"sve parametre od va¹eg Internet Provajdera ili sistemskog\n"
-"administratora.\n"
-"\n"
-"Mo¾ete konsultovati i deo upustva o Internet konekcijama za detalje\n"
-"o konfiguraciji, ili jednostavno saèekajte da vam se sistem instalira i\n"
-"onda pokrenite program koji je tamo opisan za pode¹avanje va¹e konekcije.\n"
-"\n"
-"Ukoliko ¾elite da mre¾u nakon isntalacije ili ste zavr¹ili\n"
-"konfigurisanje mre¾ne konekcije, kliknite na Poni¹ti ili \"Cancel\"."
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada mo¾ete odabrati koje servise ¾elite da se startaju pri podizanju "
-"sistema.\n"
-"\n"
-"Ovde su prikazani svi dostupni servisi na trenutnoj\n"
-"instalaciji. Pregledajte ih pa¾ljivo i deselektujte one koji vam neæe biti "
-"uvek\n"
-"potrebni pri podizanju sistema.\n"
-"\n"
-"Mo¾ete dobiti i kratko obja¹njenje o servisu selektovanjem\n"
-"odreðenog servisa. Meðutim, ukoliko niste sigurni koji od servisa jesu ili\n"
-"nisu korisni, sigurnije je ostaviti ih selektovanim.\n"
-"\n"
-"Na ovom nivou, budite veoma pa¾ljivi ukoliko ¾elite da koristite  va¹u "
-"ma¹inu kao\n"
-"server: verovatno neæete ¾eleti da startujete nijedan servis koji vam neæe\n"
-"trebati. Zapamtite da nekoliko servisa mo¾e biti opasno ukoliko\n"
-"su omoguæeni na serveru. Generano govoreæi, izaberite samo servise koje æete "
-"svarno trebati."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (skraæenica za X Window Sistem) je srce GNU/Linux grafièkog interfejsa\n"
-"na koji se sva grafièka okru¾enja (KDE, Gnome, AfterStep,\n"
-"WindowMaker, etc.) oslanjaju. U ovom delu, DrakX\n"
-"æe poku¹ati da automatski podesi X-ove.\n"
-"\n"
-"Zaista se retko de¹ava da neuspe, osim ukoliko harver nije veoma star (ili\n"
-"veoma nov). Ukoliko uspe, on æe automatski pokrenuti X-ove sa najboljom\n"
-"moguæom rezolucijom u zavisnosti od velièine monitora. Pojaviæe se prozor\n"
-"sa pitanjem da li ga vidite.\n"
-"\n"
-"Ukoliko izvodite \"Ekspert\" instalaciju, pokrenuæete Èarobnjaka za X\n"
-"konfiguraciju. Pogledajte odgovarajuæi deo uputsva za vi¹e informacija\n"
-"o ovom èarobnjaku.\n"
-"\n"
-"Ukoliko vidite gorepomenutu poruku i odgovorite sa \"Da\", tada æe DrakX "
-"nastaviti sa\n"
-"sledeæim korakom. Ukoliko ne mo¾ete da vidite poruku, to jednostavno znaèi\n"
-"da je konfiguracija pogre¹na i da æe se test sam zavr¹iti nakon\n"
-"10 sekundi, osve¾avajuæi ekran."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Kad po prvi put budete testirali X kofiguraciju, mo¾da neæete biti ba¹ "
-"zadovoljni\n"
-"sa prikazom (ekran je porevi¹e mali, pomeren ulevo ili udesno...). Sreæom,\n"
-"èak i ako se X pokrene ispravno, DrakX æe vas upitati da li vam "
-"konfiguracija\n"
-"odgovara. Takoðe æe predlo¾iti izmene u prikazu i dati listu\n"
-"moguæih modova tra¾eæi od vas da izaberete jedan.\n"
-"\n"
-"Kao poslednje re¹enje, ako jo¹ uvek ne mo¾ete da pokrenete X-ove, izaberite "
-"\"Change\n"
-"graphics card\", izaberite \"Unlisted card\", i kada vas upita koji\n"
-"server ¾elite, izaberite \"FBDev\". Ovo je sigurnosna opcija koja radi\n"
-"sa bilo kojom modernijom grafièkom karticom. Tada izaberite \"Test again\" "
-"da bi bili sigurni."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Na kraju, biæete upitani da li ¾elite grafièki interfejs\n"
-"pri startanju sistema. Ovo pitanje æe vam biti postavnjeno èak i ako niste "
-"testirali\n"
-"konfiguraciju. Naravno, odgovoriæete \"Ne\" ukoliko va¹a ma¹ina predstalja\n"
-"server, ili ukoliko niste uspe¹no podesili\n"
-"displejed."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM ima ugraðen spasilaèki mod. MO¾ete mu pristupiti\n"
-"podizaem sistema preko CDROM-a, pritisnite >>F1<< taster pri startanju i "
-"ukucajte >>rescue<< u\n"
-"promptu. Ukoliko ne mo¾ete da butujete sa CDROM-a, trebali\n"
-"bi da se vratite  na ove korake u najmanje dve situacije:\n"
-"\n"
-" * kada instalirate starter, DrakX æe prepisati sadr¾aj boot sektora (MBR)\n"
-"va¹eg osnovnog diska (osim ukoliko ne koristite neki drugi starter) da bi "
-"mogli \n"
-"da pokrenete ili Windows ili GNU/Linux (pretpostavljajuæi da imate instliran "
-"Windows na\n"
-"va¹em sistemu). Ukoliko treba da reinstalirate Windows,  Microsoft-ov "
-"instalacioni\n"
-"proces æe opet prepisati boot sektor, pa ona neæete biti u moguænosti\n"
-"da pokrene GNU/Linux!\n"
-"\n"
-" * ukoliko se problem javlja i ne mo¾ete da pokrenete GNU/Linux sa hard "
-"diska,\n"
-"ovaj flopi disk æe onda biti jedini naèin za startanje GNU/Linux-a. On\n"
-"sadr¾i dobar broj sistemskih alata za obnovu sistema, koji se\n"
-"sru¹io usled nestanka el.energije, nesretne gre¹ke u kucanju, pogre¹ne\n"
-"lozinke, ili bilo kog drugog razloga.\n"
-"\n"
-"Kada kliknete na ovaj korak, tra¾iæe se od vas da ubacite praznu disketu\n"
-"u ureðaj. Flopi disketa  mora biti prazna ili da sadr¾i podatke koji vam "
-"nisu neophodni\n"
-"Nema potrebe da je formatirate jer æe DrakX sam ponovo upisati\n"
-"celu disketu."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"U ovom trenutku, morate da izaberete gde æete instalirati\n"
-"Mandrake Linux operativni sistem na va¹ hard disk. Ukoliko je prazan ili\n"
-"postojeæi operativni sistem koristi sav postojeæi prostor na disku, treba da "
-"ga\n"
-"particionirate. U osnovi, particioniranje hard diska se sastoji logièkog\n"
-"deljenja da bi obezbedili prostor za instalaciju va¹ novi Mandrake Linux "
-"sistem.\n"
-"\n"
-"Po¹to se efekti procesa particioniranja obièno nepovratni,\n"
-"particionirnje mo¾e biti prilièno stresan za neiskusne korisnike.\n"
-"Ovaj èarobnjak pojednostavljuje ovaj proces. Pre poèetka, "
-"konsultujteupustvo\n"
-"i ne ¾urite.\n"
-"\n"
-"\n"
-"Morate da imate ili da kreirate najmanje dve particije. Jedna je za sam "
-"operativni sistem adruga\n"
-"je za virtuelnu memoriju (èesto se naziva i Swap).\n"
-"\n"
-"\n"
-"Ukoliko su particije veæ kreirane (od predhodne instalacije ilikreirane\n"
-"drugim alatom za particioniranje), morate izabrati na koje od njih "
-"æeteinstalirati \n"
-"Linux sistem.\n"
-"\n"
-"\n"
-"Ukoliko particije nisu definisane, marate da ih kreirate. \n"
-"Da bi to uradili, mo¾ete da koristite gore postavljeni èarobnjak. U "
-"zavisnosti id konfiguracije\n"
-"hard diska, postoji nekoliko moguænosti:\n"
-"\n"
-"* Koristite postojeæe particije: èarobnjak je detektovao jednu ili vi¹e "
-"postojeæihLinux particija na va¹em hard disku. Ukoliko\n"
-"  ¾elite da ih zadr¾ite, izaberite ovu opciju.\n"
-"\n"
-"\n"
-"* Brisanje celog diska: ukoliko ¾elite da izbri¹ete sve podatke i sve "
-"particije koji postoje na va¹em hard disku i zamenite ih va¹im\n"
-"  novim Mandrake Linux sistemom, mo¾ete da izaberete ovu ociju. Budite "
-"pa¾ljivisa ovom opcijom, jer neæete biti u moguænosti\n"
-"  da povratite staro stanje nakon potvrde.\n"
-"\n"
-"\n"
-"* Koristite slobodan prostor na Windows particiji: ukoliko je Microsoft "
-"Windowsinstaliran na hard disku i zauzima\n"
-"  sav prostor, morate da kreirate slobodan prostor za Linux. Da bi to "
-"uradili morate izbrisati\n"
-"  Microsoft Windows particiju i podatke (pogledaj \"Brisanje celog diska\" "
-"ili \"Ekspertni mod\" re¹enja) ili da promenite velièinu\n"
-"  Microsoft Windows particije. Taj postupak se mo¾e izvesti bez "
-"gubljenjapodataka. Ovo re¹enje se preporuèuje\n"
-"  ukoliko ¾elite da koristite Mandrake Linux i Microsoft Windows naistom "
-"kompjuteru.\n"
-"\n"
-"\n"
-"  Pre nego izaberete ovu opciju, morate znati da æe velièinaMicrosoft\n"
-"  Windows particije biti manja nego ¹to je sada. To znaèi daæete imati manje "
-"prostora pod\n"
-"  Microsoft Windows-om za podatke ili instalaciju novog softvera.\n"
-"\n"
-"\n"
-"* Ekspertni mod: ukoliko ¾elite da ruèno particionirate hard disk, mo¾eteda "
-"izaberete ovu opciju. Budite pa¾ljivi pre nego\n"
-"  izaberete ovu pociju. ¹er je ovo dobra ali i opasna stvar. Mo¾etelako "
-"izgubiti sve podatke. Dakle,\n"
-"  nemojte birati ovu opciju ukoliko ne znate ¹ta radite."
-
-#: ../../help.pm_.c:347
-#, fuzzy
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"I stigli ste. Instalacija je sada zavr¹ena i va¹ GNU/Linux sistem je \n"
-"spreman za upotrebu. Samo kliknite na U redu ili \"OK\" da bi restartovali "
-"sistem. Mo¾ete pokrenuti\n"
-"GNU/Linux ili Windows, ¹ta god vi¹e preferirate (ukoliko imate instalirana "
-"dva sistema), èim\n"
-"sse raèunar ponovo pokrene.\n"
-"\n"
-"Taster Napredno \"Advanced\" (samo u Ekspert modu) prikazuje jo¹ dva tastera "
-"za:\n"
-"\n"
-" * \"kreiranje auto-instalacione diskete\": radi kreiranja instalacionog "
-"flopi diska\n"
-"koji æe automatski pokrenuti celu instalaciju bez pomoæi operatora\n"
-", slièno ovoj instalaciji koju ste upravo izveli.\n"
-"\n"
-"   Mo¾ete primetiti da su dve razlièite opcije dostupne nakon pritiska na "
-"taster:\n"
-"\n"
-"    * \"sa ponavljanjem\". Ovo je delom automatizirana instalacija jer korak "
-"sa\n"
-"particioniranjem diska ostaje interaktivan (samo on).\n"
-"\n"
-"    * \"Automatizovano\". Potpuno automatizovana instalacija: hard disk se u "
-"potpunosti\n"
-"formatizuje, i svi podaci æe biti izgubljeni.\n"
-"\n"
-"   Ova opcija je veoma korisna ukoliko izvodite veliki broj sliènih "
-"instalacija\n"
-"na veæem broju ma¹ina. Pogledajte sekciju o auto instalaciji na na¹em web "
-"sajtu.\n"
-"\n"
-" * \"Sa¹uvaj selekciju paketa\"(*) : snima selekciju paketa koji ste\n"
-"napravili u ovoj instalaciji. Tako, da kada budete izvodili drugu "
-"instalaciju, ubacite disketu\n"
-"i pokrenete pomoæni ekran pritiskom na\n"
-"[F1] taster, i zahtevom za >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Morate da iamte  FAT-formatiranu disketu (da bi je formatirali pod GNU/"
-"Linux-om, ukucajte\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Svaka particija koja je novodefinisana mora biti\n"
-"formatirana za uptrebu (formatiranje znaèi kreiranje datoteènog(fajl) "
-"sistema).\n"
-"\n"
-"Sada mo¾da ¾elite da reformatirate postojeæe particije da bi izbrisali\n"
-"podatke koje sadr¾e. Ukoliko ¾elite to, izaberite particije \n"
-"koje ¾elite da formatizujete.\n"
-"\n"
-"\n"
-"Zapamtite da nije potrebno da reformatirate sve postojeæe particije.\n"
-"Morate da reformatirate particije koje sadr¾e operativni sistem (kao ¹to su "
-"\"/\",\n"
-"\"/usr\" ili  \"/var\") ali ne morate da reformatirate particije koje sadr¾e "
-"podatke\n"
-"koje ¾elite da zadr¾ite (obièno /home).\n"
-"\n"
-"\n"
-"Pazite pri biranju particija, posle formatiranja, sv podaci æe \n"
-"biti izbrisani i neæete ih moæi povratiti.\n"
-"\n"
-"\n"
-"Kliknite na \"U redu\" kada budete spreni za formatiranje particija.\n"
-"\n"
-"\n"
-"Kliknite na  \"Poni¹ti\" ukoliko ¾elite da izabereete druge particije za "
-"instalaciju novog\n"
-"Mandrake Linux operativnog sistema. Kliknite na \"Napredno\" ukoliko ¾elite "
-"da izaberete particije koje æe biti proverene\n"
-"od lo¹ih blokova na disku."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Va¹ novi Mandrake Linux operativni sistem se trenutno instalira.\n"
-"Ova operacija bi trebala da potraje nekoliko minuta (u zavisnosti od "
-"velièinepaketa koji se instaliraju i brzine va¹eg kompjutera).\n"
-"\n"
-"Molim Vas za strpljenje.Hvala."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Pre nego ¹to nastavite pa¾ljivo proèitajte uslove licence. Ona\n"
-"pokriva celu Mandrake Linux distribuciju, i ukoliko se ne sla¾ete\n"
-"sa svim uslovima koji se nalaze u njoj, kliknite na \"Odbijam\" taster koji "
-"æe odmah\n"
-"zaustaviti instalaciju. Da bi nastavili sa instalacijom, kliknite \n"
-"taster \"Prihvatam\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Na ovom mestu, vreme je da izaberete ¾eljeni nivo sigurnosti za va¹u\n"
-"ma¹inu. Kako pravilo nala¾e, ¹to je ma¹ina vi¹e izlo¾ena, i ¹to je vi¹e\n"
-"podataka koji su ubaèeni znaèajniji, mora biti i veæi nivo sigurnosti.\n"
-"Ipak, veæi nivo sigurnosti ida na u¹trb brzine i\n"
-"lakoæe upotrebe. Pogledajte MSEC poglavlje u ``Upustvu'' da\n"
-"bi dobili vi¹e informacija o znaèenju ovih nivoa.\n"
-"\n"
-"Ukoliko ne znate ¹ta da izaberete, ostanite na default opciji."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Na ovoj taèki, morate izbrati koju particiju(e) ¾elite da koristite za\n"
-"instalaciju novog Mandrake Linux sistema. Ukoliko su particije\n"
-"veæ definisane (od predhodne instalacije ili od strane\n"
-"drugog alata za particije), mo¾ete da koristite postojeæe particije. U "
-"drugim sluèajevima,\n"
-"hard disk particije moraju biti definisane.\n"
-"\n"
-"Da bi kreirali particije, morate prvo izabrati hard disk. Mo¾ete izabrati\n"
-"disk za particioniranje klikom na \"hda\" za prvi IDE disk, \"hdb\" ili \n"
-"za drugi ili \"sda\" za prvi SCSI disk itd.\n"
-"\n"
-"Za particioniranje selektovanog hard diska, mo¾ete koristiti sledeæe "
-"opcije:\n"
-"\n"
-"   * \"Oèisti sve\": ova opcija bri¹e sve particije na izabranom hard "
-"disku.\n"
-"\n"
-"   * \"Auto alociranje\": ova opcija dozvoljava da automatski kreirate  Ext2 "
-"i swap particije na slobodnom prostoru \n"
-"     hard diska.\n"
-"\n"
-"   * \"Spasi tabelu particija\": ukoliko je va¹a tabela particija o¹teæena, "
-"mo¾ete da probate da je oporavite koristeæi ovu opciju. Budite\n"
-"     pa¾ljivi i znajte da mo¾e da i ne uspe.\n"
-"\n"
-"   * \"Vrati na staro\": ova opcija æe poni¹titi izmenu.\n"
-"\n"
-"   * \"Ponovno uèitavanje\": ovu opciju mo¾ete koristiti ukoliko ¾elite da "
-"poni¹titisve promene i uèitate inicijalnu tabelu particija\n"
-"\n"
-"   * \"Èarobnjak\": ukoliko ¾elite da koristite èarobnjaka za "
-"particioniranje hard diska, izaberite ovu opciju. Preporuèena je ukoiko\n"
-"     nemate mnogo znanja o partcijama.\n"
-"\n"
-"   * \"Povrati sa diskete\": ukoliko ste snimili tabelu particija na "
-"disketu  tokom prethodne instalacije, mo¾ete je\n"
-"     vratiti sa ovom opcijom.\n"
-"\n"
-"   * \"Snimi na disketu\": ukoliko ¾elite da da snimite tabelu particija na "
-"disketu da bi mogli kasnije da je povratite, mo¾ete da iskoristite\n"
-"     ovu opciju. Naroèito preporuèujemo ovu opciju\n"
-"\n"
-"   * \"Uraðeno\": kada zavr¹ite sa particioniranjem hard diska, iskoristite "
-"ovu opciju da bi snimili promene.\n"
-"\n"
-"Za vi¹e informacija, mo¾ete za svaku ocpiju  dobiti kretanjem pomoæu "
-"tastature: navigacijom kroz particije pomoæu [Tab] tastera i [Up/Down] "
-"strelica.\n"
-"\n"
-"Kada je particija izabrana, mo¾ete koristiti:\n"
-"\n"
-" * Ctrl-c za kreiranje nove particije (kada je izabrana prazna particija);\n"
-"\n"
-" * Ctrl-d za brisanje particije;\n"
-"\n"
-" * Ctrl-m za postavljanje taèke montiranja.\n"
-"\n"
-"Ukoliko radite instalaciju na PPC Ma¹inu, mo¾da æete ¾eleti da kreirate "
-"malu\n"
-"HFS 'bootstrap' particiju od najmanje 1MB za upotrebu\n"
-"yaboot startera. Ukoliko se dvoumite da ovu particiju napravite malo veæom,\n"
-"na primer 50MB, mo¾ete iskoristiti taj prostor za sme¹tanje\n"
-"rezervnog kernela i ramdisk image za startanje u hitnim situacijama."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Jedna ili vi¹e Microsoft Windows particija je detektovano \n"
-"na hard disku. Izaberite koju od njih ¾elite da smanjite da bi instalirali\n"
-"novi Mandrake Linux operativni sistem.\n"
-"\n"
-"Svaka particija je ispisana na sledeæi naèin: \"Ime Linux-a\",\"Ime Windows-a"
-"\"\n"
-"\"Kapacitet\".\n"
-"\n"
-"\"Ime Linux-a\" je kodirano na sledeæi naèin: \"tip hard diska\", \"broj "
-"hard diska\",\n"
-"\"broj particije\" (na primer, \"hda1\").\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk ID ureðaj i \"sd\"\n"
-"ukoliko je SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvek slovo posle \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-" * \"a\" znaèi  \"master hard disk na primarnom  IDE kontroleru\",\n"
-"\n"
-" * \"b\" znaèi \"slave hard disk na primarnom IDE kontroloeru\",\n"
-"\n"
-" * \"c\" znaèi \"master hard disk na sekundranom IDE kontroloeru\",\n"
-"\n"
-" * \"d\" znaèi \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znaèi \"primarni hard disk\", a \"b\" znaèi "
-"\"sekundarni hard disk \", itd.\n"
-"\n"
-"\"Ime Windows-a\" je slovo hard diska pod Windows-om (prvi disk\n"
-"ili particija se zove \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Budite strpljivi.Trajanje ovih oeracija mo¾e biti nekoliko minuta"
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX sada treba da zna da li ¾elite da pokrenete default (\"Preporuèeno\")\n"
-"instalaciju ili ¾elite da imate veæu kontrolu (\"Ekspert\"). Takoðe\n"
-"iamte i pravo izbora pokretanja nove instalacije ili a¾uriranja postojeæeg\n"
-"Mandrake Linux sistema:\n"
-"\n"
-" * kompeltno uklanja stari sistem\n"
-"\n"
-" *\n"
-"\n"
-" *\n"
-"\n"
-"Sa druge strane, \"A¾uriranje\" vam dozovoljava nadogradnju postojeæeg "
-"sistema.\n"
-"Konaèno, izaberite \"A¾uriranje paketa\" ukoliko ¾elite da a¾urirate\n"
-"pakete sa prethodne instalacije, bez drugih izmena.\n"
-"\n"
-"Izaberite  \"Instalacija\" ukoliko nema prethodne verzijeMandrake Linux\n"
-"koja je instalirana ili hoæete da koristite vi¹e operativnih sistema.\n"
-"\n"
-"Izaberite \"A¾uriranje\" ukoliko ¾elite da a¾urirate postojeæu verziju "
-"Mandrake Linux-a.\n"
-"\n"
-"U zavisnosti od va¹eg poznavanja GNU/Linux-a, mo¾ete izabrati jednu od "
-"sledeæih nivoa za instalaciju ili a¾uriranje\n"
-"Mandrake Linux operativnog sistema:\n"
-"\n"
-"* Preporuèeno: ukoliko niakada niste instalirali  GNU/Linux operativni "
-"sistem izaberite ovo. Instalacija æe biti\n"
-"  veoma laka i imaæete da odgovorite na svega nekoliko pitanja.\n"
-"\n"
-"* Ekspert: ukoliko iamte dobro znanje o GNU/Linux-u, mo¾ete izabrati ovu "
-"instalacionu klasu. Kao i \"Sa pode¹avanjem\"\n"
-"instalacionoj klasi, moæi æete da birate primarnu namenu (radna stanica, "
-"server, razvojna stanica). Budite veoma\n"
-"pa¾ljivi pre izbora ove instalacione klase. Moæi æete da izvodite veoma\n"
-"podesivu instalaciju.\n"
-"Odgovori na neka pitanja mogu biti veoma te¹ki ukoliko nemate dobro znanje "
-"o\n"
-"GNU/Linux-u. Dakle, nemojte birati \n"
-"ovu instalacionu kasu ukoliko ne znate ¹ta radite."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"U principu, DrakX bira desnu tastaturu za vas (u zavisnosti od toga koji\n"
-"ste jezik izabrali) i èak i neæete videti ovaj korak. Ipak, mo¾e\n"
-"se desiti da niste dobili tastaturu koja odgovara va¹em jeziku: na\n"
-"primer, ukoliko ste ©vajcarac koji govori engleski, verovatno æete ¾eleti\n"
-"©vajcarsku tastaturu. Ili ukoliko govorite Engleski ali se nalazite\n"
-"u Kvebeku, mo¾ete se naæi u istoj situaciji. U oba\n"
-"sluèaja, moraæete da se vratite na ovaj instalacioni korak i izaberete\n"
-"odgovarajuæu tastaturu sa liste.\n"
-"\n"
-"Kliknite na taster \"Jo¹\" da bi dobili kompletnu listu\n"
-"podr¾anih tastatura."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Izaberite va¹ jezik za instalaciju i kori¹æenje sistema.\n"
-"\n"
-"Klikom na taster \"Napredno\" omoguæiæete sebi da vidite druge\n"
-"jezike koje mo¾ete instalirati na va¹u radnu stranicu. Biranjem drugih "
-"jezika\n"
-"æete instalirati fajlove vezane (za specificirane jezike) za dokumentaciju "
-"i\n"
-"aplikacije. Na primer, ukoliko æe na va¹em raèunaru hostovati korisnici iz "
-"©panije\n"
-"izaberite Engleski kao glavni a na stablu\n"
-"oznaèite i \"©paniski|©panija\".\n"
-"\n"
-"Zapamtite da mo¾ete instalirati vi¹e jezika. Kada izaberete sve ¾eljene\n"
-"dodatne lokalizacije kliknite na taster \"U redu\" da bi nastavili."
-
-#: ../../help.pm_.c:609
-#, fuzzy
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Po default-u, DrakX pretpostavlja da imate mi¹a sa dva tastera i podesiæe\n"
-"emulaciju treæeg tastera. DrakX æe automatski prepoznati da li se radi o\n"
-"PS/2, serijski ili USB mi¹u.\n"
-"\n"
-"Ukoliko ¾elite da specificirate drugi tip mi¹a odaberite odgovarajuæi\n"
-"tip sa liste.\n"
-"\n"
-"Ukoliko izberete mi¹a koji se razlikuje od default-a pojaviæe vam se\n"
-"test ekran. Koristite tastere i toèkiæe da bi proverili da li su postavke\n"
-"dobre. Ukoliko mi¹ ne radi ispravno pritisnite  taster za raznmak (space "
-"bar) ili\n"
-"taster RETURN za \"Poni¹ti\" i izaberite ponovo."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molim, izaberite odgovarajuæi port. Na primer, COM1 port pod MS Windows-om\n"
-" u Linux-u ima oznaku ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Ovo je najzanaèajnija taèka u odluèivanju o sigurnosti va¹eg GNU/Linux\n"
-"sistema: morate da unesete \"root\" lozinku. \"root\" je administrator\n"
-"sistema i jedini je ovla¹ten da vr¹i izmene, dodaje korisnike,\n"
-"menja osnovnu konfiguraciju sistema, itd. Ukratko, \"root\" mo¾e\n"
-"da uradi sve! Zbog toga morate da izaberete lozinku koja te¹ko mo¾e da se\n"
-"pogodi - DrakX æe vam reæi ukoliko je ona suvi¹e jednostavna. Kao ¹to mo¾ete "
-"da vidite, mo¾ete da\n"
-"izaberete i da ne unesete lozinku, ali vam ozbiljno preporuèujemo da to\n"
-"neradite iz jednog razloga: nemojte da mislite da to ¹to ste startovali GNU/"
-"Linux da\n"
-"va¹i drugi operativni sistemi sigurni od gre¹aka. Kako \"root\" mo¾e da\n"
-"preskoèi sva ogranièenja i nenamerno izbri¹e sve podatke na particiji\n"
-"neopreznim pristupom, va¾no je da je te¹ko\n"
-"postati \"root\".\n"
-"\n"
-"Lozinka treba da bude me¹avina brojeva i slova i treba da sadr¾i najmanje 8\n"
-"karaktera. Nikada ne zapisujte na papir \"root\" lozinku - tako lako\n"
-"mo¾ete ugroziti sistem.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-
-#: ../../help.pm_.c:663
-#, fuzzy
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO i GRUB su starteri (boot loaders) za GNU/Linux. Ovaj korak je , "
-"naravno,\n"
-"potpuno automatizovan. U stvari, DrakX analizira boot sektor hard diska\n"
-"i reaguje na osnovu onog ¹to je prona¹ao:\n"
-"\n"
-" * ukoliko je pronaðen Windows boot sektor, on æe ga zameniti sa GRUB/LILO "
-"boot\n"
-"sektorom. Sreæom, moæi æete da startujete ili GNU/Linux ili neki drugi OS;\n"
-"\n"
-" * ukoliko je pronaðen GRUB ili LILO boot sektor, on æe ga zameniti sa "
-"novim;\n"
-"\n"
-"Ukoliko je u dilemi, DrakX æe prikazadi dijalog sa razlièitim opcijama.\n"
-"\n"
-" * \"Ponuðeni starteri\": iamte tri opcije:\n"
-"\n"
-"    * \"LILO sa grafièkim menijem\": ukoliko vi¹e volite LILO sa grafièkim\n"
-"interfejsom.\n"
-"\n"
-"    * \"GRUB\": ukoliko vi¹e volite GRUB (tekstualni mod).\n"
-"\n"
-"    * \"LILO sa tekstualnim menijem\": ukoliko vi¹e volite LILO sa "
-"tekstualnim interfejsom.\n"
-"\n"
-" * \"Boot ureðaj\": u veæini sluèajeva, neæete menjati default\n"
-"(\"/dev/hda\"), ali ukoliko ¾elite, mo¾ete starter da instalirate na\n"
-"drugi hard disk (\"/dev/hdb\"), ili èak na disketu (\"/dev/fd0\").\n"
-"\n"
-" * \"Vreme do po¹etka startanja default sistema\": kada startujete raèunar,\n"
-"ova pauza vam omoguæava da izaberete - u starterovom meniju,\n"
-"drugi sistem (recimo Njinjdovs).\n"
-"\n"
-"!! Budite pa¾ljivi, jer ako izaberete da ne instalirate starterr (klikom na\n"
-"\"Poni¹ti\"), morate osigurati drugi naèin da startujete Mandrake\n"
-"Linux sistem! Budite sigurni da znate ¹t aradite pre nego izmenite\n"
-"i jednu opciju. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"Mandrake Linux installs its own boot loader, which will let you boot either\n"
-"GNU/Linux or any other operating systems which you have on your system.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"existing options. Double-clicking on an existing entry allows you to change\n"
-"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
-"on to the next installation step."
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) i Grub su starteri: oni omoguæavaju da startate \n"
-"ili Linux ili bilo koji drugi operativni sistem prisutan na va¹em raèunaru.\n"
-"Naravno, ovi drugi operativni sistemi su ispravno detektovani i "
-"instalirani.\n"
-"Ukoliko to nije tako,mo¾ete to sami urediti ovde.Pazite kada unosite\n"
-"parametre\n"
-"\n"
-"Takoðe,mo¾ete ¾eleti da ostalim operat.sistemima onemoguæite da pristupe "
-"drugi\n"
-"U tom sluèaju, treba da izbri¹ete odgovarajuæe linije za te sisteme. Ali\n"
-"onda morate imati boot disketu da bi ih vi mogli pokrenuti!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Morate oznaèiti gde ¾elite da postavite podatke potrebne za podizanje GNU/"
-"Linux-a.\n"
-"\n"
-"Ukoliko neznate taèno ¹ta radite,izaberite \"Prvi sektor\n"
-"diska (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control "
-"Centernand clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sada treba da detektuje IDE ureðaje prisutne u ve¹em raèunaru.DrakX æe "
-"potra¾iti PCI SCSI adapter(e).\n"
-"Ukoliko DrakX pronaðe SCSI adapter(e) i bude znao koji upravljaèki program \n"
-"(drajver) koristion æe ga(ih) automatski instalirati.\n"
-"\n"
-"Po¹to se mo¾e desiti da pri detekciji neka komponenta ne bude detektovana "
-"DrakX æe vas upitati da li imate PCI SCSI adapter. Kliknite \"Da\" \n"
-"ukoliko znate da imate SCSI adapter na svojoj ma¹ini. Na prikazanoj listi "
-"moæi æete da izaberete odgovoarajuæi.\n"
-"Kliknite \"Ne\" ukoliko nemate SCSI adaptera u  ma¹ini. Ukoliko niste "
-"sigurni\n"
-"proverite na listi detektovanog hardvera selektovanjem \"Pogledaj info o "
-"hardveru\"i klikom na \"U redu\". Pregledajte\n"
-"listu a onda kiknite na \"U redu\" da bi se vratili na pitanje o SCSI "
-"ureðajima.\n"
-"\n"
-"Ukoliko morate ruèno da specificirate va¹ adapter, DrakX æe\n"
-"vas upitati da odredite opcije za njega.Treba li bi da dozvolite DrakX-u da\n"
-"ispita adapter radi tih opcija. Ovo obièno i uspe.\n"
-"\n"
-"Ukoliko DrakX nije u stanju da ispita opcije koje su potrebne, moraæete da "
-"sami odredite opcije za drajver.\n"
-"Pogledajte i Instalacioni vodiè (3 poglavlje, sekcija \"Prikupljanje "
-"informacija o va¹em hardveru\")\n"
-"da bi saznali kako da pribavite informacije o parametrima potrebnim za "
-"hardver,sa svoje Windows instalacije (ukoliko je imate na sistemu),\n"
-"dokumenatciju o hardveru, ili sa proizvoðaèevog \n"
-"veb sajta (ukoliko imate pristup internetu)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mo¾ete dodati i dodatne unose za yabbot, ili za druge operativne ssisteme,\n"
-"alternativne kernele, ili za emergency boot image.\n"
-"\n"
-"Za druge OS-ove - unos sadr¾i samo oznaku i root particiju.\n"
-"\n"
-"Za Linux, postoji nekoliko moguænosti: \n"
-"\n"
-" * Oznaka: Ovo je jednostavno ime koje æete ukucati pri yaboot promptu da bi "
-"izabrali ovu \n"
-"startnu opciju.\n"
-"\n"
-" * Image: Ovo je ime kernela koji se startuje.  Obièno vmlinux ili \n"
-"varijacija vmlinux sa ekstenzijom.\n"
-"\n"
-" * Root: \"root\" ureðaj ili \"/\" za va¹u Linux instalaciju.\n"
-"\n"
-"  \n"
-" * Dodatak: Na Apple hardveru, kernelova opcija se koristi za prilièno èesto "
-"da\n"
-"asistira inicijalizaciju video hardvera, ili da omoguæi emulaciju tastera za "
-"mi¹ na tastaturi zbog \n"
-"èestog nedostatka drugog i treæeg tastera na Apple mi¹evima.  Sledi par \n"
-"primera:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: Ova opcija se mo¾e koristiti ili za podizanje inicijalnih modula, "
-"pre nego je boot \n"
-"ureðaj dostupan, ili za podizanje ramdisk image za startanje u hitnim "
-"situacijama.\n"
-"\n"
-" * Initrd-velièina: velièina default ramdisk je generalno 4096 bajta.  "
-"Ukoliko vam treba\n"
-"alociranje velikog ramdisk-a, ova opcija mo¾e biti korisna.\n"
-"\n"
-"  - Read-write: Normalno se 'root' particija inicijalno postavlja kao read-"
-"only, da bi omoguæila\n"
-"proveru datoteènog sistema pre nego sistem postane \"aktivan\".  Ovde mo¾ete "
-"poni¹titi ovu opciju.\n"
-"\n"
-" * NoVideo: Ukoliko se Apple video hardver poka¾e veoma problematiènim, "
-"mo¾ete\n"
-"izabrati ovu opciju da bi startali sistem u 'novideo' modu, sa osnovnom "
-"framebuffer podr¹kom.\n"
-"\n"
-" * Default: Kako je ovo default Linux selekcija, dovoljno je da samo\n"
-"pritisnete ENTER pri yaboot promptu.  Ovaj unos æe takoðe biti dodatno "
-"oznaèen sa \"*\", ukoliko\n"
-"pritisnete TAB da bi videli startnu selekciju."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je starter NewWorld MacIntosh hardver. On mo¾e da pokrene\n"
-"GNU/Linux, MacOS, ili MacOSX, ukoliko su prisutni na va¹oj ma¹ini.\n"
-"Normalno, ovi drugi operativni sistemi se smatraju korektno detektovani i \n"
-"instalirani. Ukoliko to nije sluèaj, mo¾ete ruèno dodati unos na ovom\n"
-"ekranu. Budite pa¾ljivi pri izboru parametara.\n"
-"\n"
-"Osnovne opcije Yaboot-a su:\n"
-"\n"
-"  - Inicijalna poruka: Jednostavna tekstualna poruka koja se prikazuje pre "
-"statrtnog\n"
-"prompta.\n"
-"\n"
-" * Boot ureðaj: Ukazuje gde ¾elite da smestite informaciju potrebnu za \n"
-"startanje GNU/Linux-a. Generalno gledano, moraæete da podesite bootstrap "
-"particiju pre \n"
-"nego podesite ovu informaciju.\n"
-"\n"
-" * Omoguæi Firmware pauzu: Za razliku od LILO-a, postoje dve vrste pauze \n"
-"yaboot-a.  Prva pauza se meri u sekundama i u tom vremenu mo¾ete \n"
-"birati izmeðu CD-a, OF starta, MacOS, ili Linux-a.\n"
-"\n"
-" * Pauza pri startanju kernela: Ova pauza je slièna pauzi kod LILO "
-"startera.  Nakon \n"
-"izbora Linux-a, imaæete pauzu od 0.1 sekunde pre nego ¹to se selektuje\n"
-"default opis kernela.\n"
-"\n"
-" * Omoguæi startanje CD-a ?: Ukoliko oznaèite ovu opciju moæi æete da "
-"izaberete \"C\" za CD pri\n"
-"prvom startnom promptu.\n"
-"\n"
-" * Omoguæi OF startanje?: Ukoliko oznaèite ovu opciju moæi æete da izaberete "
-"\"N\" za Open\n"
-"Firmware pri prvom startnom promptu.\n"
-"\n"
-" * Default OS: Mo¾ete da izaberete koji operativni sistem æe biti pokretan "
-"kao default kada Open Firmware \n"
-"pauza zavr¹i."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Ovde su prikazani razlièiti parametri vezani za va¹u ma¹inu. U zavisnosti\n"
-"od va¹eg instaliranog hardvera, mo¾etey - ili ne morate, pogledajte sledeæe "
-"unose:\n"
-"\n"
-" * \"Mi¹\": proverite trenutne postavke za mi¹a i kliknite na taster\n"
-"da bih promenili ukoliko je neophodno.\n"
-"\n"
-" * \"Tastatura\": proverite trenutni rasored tastature tion i kliknite na\n"
-"taster da bi napravili izmene ukoliko su potrebne.\n"
-"\n"
-" * \"Vremenska zona\": DrakX, po default-u, pogaða va¹u vremensku zonu u "
-"zavisnosti koji se jezik\n"
-"odabrali. Ali opet, mo¾da ste izabrali tastaturu koja se razlikuje\n"
-"od tastature zemlje koju ste naveli.\n"
-"Moraæete da kliknete na taster \"Vremenska zona\" da bi\n"
-"podesili èasovnik u skladu sa vremenskom zonom u kojoj se nalazite.\n"
-"\n"
-" * \"©tampaè\": kilkom na taster \"©tampaè\" pokrenuæete èarobnjaka za\n"
-"konfigurisanje ¹tampaèa.\n"
-"\n"
-" * \"Zvuèna kartica\": ukoliko je zvuèna kartica detektovana, onda je\n"
-"ovde prikazana. Nisu moguæe promene u toku instalacije.\n"
-"\n"
-" * \"TV kartica\": ukoliko je TV kartica detektovana, onda je\n"
-"prikazana ovde. Nisu moguæe promene u toku instalacije.\n"
-"\n"
-" * \"ISDN kartica\": ukoliko je ISDN kartica detektovana, onda je\n"
-"prikazana ovde. Mo¾ete kliknuti na tester da bi promenili parametre\n"
-"koji su vezani za nju."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk koji ¾elite da izbri¹ete da bi instalirali novu Mandrake "
-"Linux \n"
-"particiju. Budite pa¾ljivi, svi podaci na njemu æe biti izgubljeni\n"
-"i neæe se moæi povratiti!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Kliknite na \"U redu\" ukoliko ¾elite da izbri¹ete sve podatke i \n"
-"particije na ovom hard disku.Budite pa¾ljivi, posle klika na \"U redu\", vi\n"
-"neæete moæi da povratite bilo koji podatak ili particiju na hard disku,\n"
-"pa i bilo koje Windows podatke.\n"
-"\n"
-"Kliknite na \"Poni¹ti\" da bi poni¹ti ovu operaciju bez gubljenja podataka "
-"i\n"
-"particija koje su prisutne na ovom hard disku."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate i %s da formatirate"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vi ste izabrali sledeðe servere: %s\n"
-"\n"
-"\n"
-"Ovi serveri se aktiviraju po osnovnoj postavci. Oni nemaju poznatih "
-"sigurnosnih\n"
-"nedostataka, ali se ipak mogu pojaviti neki novi. Ukoliko se to desi, morate "
-"ih a¾urirati\n"
-"¹to je pre moguðe.\n"
-"\n"
-"\n"
-"Da li zaista ¾elite da instalirate ove servise?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nije moguæ prenos bez NIS domena"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu praznu disketu u ureðaj %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije formatirana sa FAT sistemom"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da bi koristili ovaj izbor za èuvanje selekcije paketa, izaberite "
-"instalaciju sa ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gre¹ka kod otvaranja datoteka %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neke hardverske komponente u va¹em raèunaru zahtevaju odgovarajuæe drajvere "
-"da bi normalno funkcionisale.\n"
-"Informacije o njima mo¾ete pronaæi na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati  root particiju.\n"
-"Za ovo, kreirajte particiju (ili kliknite na postojeæu).\n"
-"Zatim izaberite \"Taèka montiranja\" i podesite na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Hm, nema swap particije\n"
-"\n"
-"Svejedno nastaviti dalje ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu u /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za alociranje novih particija"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Koristi postojeæu particiju"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nema ni jedne pariticije za rad"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju ¾elite da korisite za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izaberite velièinu"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Velièina Root particije u MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Velièina Swap particije u MB:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Korisiti slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji  ¾elite da promenite velièinu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Proraèunavam granice Windows fajl-sistema"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program za promenu velièine FAT paritcija ne mo¾e da upravlja va¹om "
-"particijom, \n"
-"zbog sledeæe gre¹ke: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Va¹a Windows particija je previ¹e fragmentirana, prvo pokrenite ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX treba da izmeni velièinu Windows particije. Budite pa¾ljivi: ova\n"
-"operacija je opasna. Ukoliko to do sada niste radili, prvo treba da izaðete\n"
-"iz instalacije,pokrenete pod Windows-om\n"
-"scandisk (eventualno i defrag), a onda ponovo pokrenite instalaciju.\n"
-"Ako ste sigurni, pritisnite OK (U redu)."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koju velièinu ¾elite da zadr¾ite za prozore"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particija %s "
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT izmena velièine neuspela: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne postoje FAT particije kojima se mo¾e promeniti velièina ili koje se mogu "
-"korisititi za loopback (ili nema dovoljno slobodnog prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Izbri¹i celi disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Imate vi¹e od jednog hard diska, na koji od njih ¾elite da instalirate "
-"Linux ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SVE postojeæe particije i podaci na disku %s æe biti izgubljeni"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Custom disk particioniranje"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada mo¾ete particionirati va¹ %s hard disk ureðaj\n"
-"Kada zavr¹ite,ne zaboravite da potvrdite koristeæi `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na Windows particiji"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ne mogu da pronaðem slobodan prostor za instaliranje"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX èarobnjak za particioniranje je prona¹ao sledeæa re¹enja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspelo : %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Pristupam  mre¾u"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Odstupam od mre¾e"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Gre¹ka, ali neznam kako da je razre¹im.\n"
-"Nastavite na va¹ rizik!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplirana taèka montiranja %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki va¾ni paketi nisu dobro instalirani.\n"
-"Va¹ cdrom ureðaj ili cd su neispravni.\n"
-"Proverite cdrom na instaliranom kompjuteru koristeæe \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro¹li u  %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nepristupaèan disketni ureðaj"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Pokreæem korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Va¹ sistem ima manjak snage. Usled toga mo¾ete imati problema pri "
-"instalaciji\n"
-"Mandrake Linux. Ukoliko se oni pojave, mo¾ete probati tekstualnu "
-"instalaciju. Da bi to postigli,\n"
-"pritisnite `F1' pri startanju sa CDROM-a, a onda ukucajte  `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalacione klase"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Molim vas da izaberete jednu od sledeæih instalacionih klasa:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna velièina grupa koje ste izabrali iznosi  %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ukoliko ¾elite da instalirate manje,\n"
-"izaberite procentualno broj paketa koje ¾elite da instalirate.\n"
-"\n"
-"Pri malom procentu æe se instalirati samo va¾ni paketi;\n"
-"dok æe pri procentu od 100%% biti instalirani svi paketi."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na va¹em disku ima mesta samo za %d%% ovih paketa.\n"
-"\n"
-"Ukoliko ¾elite da instalirate manje od ovoga,\n"
-"izaberite procentualno broj paketa koje ¾elite da instalirate.\n"
-"Pri malom procentu æe se instalirati samo va¾ni paketi;\n"
-"dok æe pri procentu od  %d%% biti instalirano maksimalno moguæ broj paketa"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Moæi æete da ih preciznije birate u sledeæem koraku."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procenat paketa za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Odabir grupa paketa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Pojedinaèno biranje paketa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna velièina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Lo¹ paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velièina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Va¾no: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne mo¾ete selektovati ovaj paket jer nema vi¹e slobodnog prostora"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Sledeæi paketi treba da budu instalirani"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Sledeæi paketi æe biti izbrisani"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ne mo¾ete selektovati/deselektovati ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezni paket,i ne mo¾e biti deselektovan"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Mo¾ete deselektovati ovaj paket jer je veæ instaliran"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket mora biti a¾uriran\n"
-"Da li sigurno ¾elite da ga deselektujete ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne mo¾ete deselektovati ovaj paket.On mora biti a¾uriran"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Automatski prika¾i izabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instaliraj"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Uèitaj/Snimi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "A¾uriranje selekcije paketa"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalno instaliraj"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izaberi pakete za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Procenjujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostalo vreme"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Samo momenat, pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odbaci"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promenite va¹ Cd-Rom!\n"
-"\n"
-"Ubacite va¹ CD oznaèen sa \"%s\" u pogon i pritisnite \"U redu\" kada ste "
-"spremni.\n"
-"Ukoliko ga nemate pritisnite  Poni¹ti."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Svejedno nastaviti dalje ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Gre¹ka u listi paketa:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Gre¹ka pri instalaciji paketa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Upozorenje !\n"
-"\n"
-"Pa¾ljivo proèitajte dole navedene uslove. Ukoliko se ne sla¾ete sa bilo "
-"kojim \n"
-"delom, onda nemate odobrenje za instaliranje sledeæeg CD-a. Pritisnite "
-"'Odbijam' \n"
-"da bi nastavili instalaciju bez upotrebe tih CD medija.\n"
-"\n"
-"\n"
-"Neke komponente sadr¾ane u sledeæim CD medijama nisu pod\n"
-"GPL Licencom ili sliènim ugovorima. Svaka takva komponenta je onda "
-"uslovljena\n"
-"uslovima i ugovorima sopstevene lincence. \n"
-"Pa¾ljivo proèitajte i upoznajte se sa takvim specifiènim licencama pre \n"
-"nego uotrebite ili redistribuirate pomenute komponente. \n"
-"Takve licence æe u glavnom zabranjivati transfer, kopiranje \n"
-"(osim za svrhu backup-a podataka), redisribuciju, nahnadnu promenu, \n"
-"rastavljanje, de-kompajliranje ili menjanje komponenti. \n"
-"Bilo koji deo ugovora koji nije ispo¹tovan istovremeno uklanja i ostala va¹a "
-"prava\n"
-"u datoj licenci. Ukoliko vam odreðena licenca ne garantuje takva\n"
-"prava, obièno ne mo¾ete instalirati programe na vi¹e od jedanog\n"
-"aiatema, ili ih prilagoditi da se mogu koristiti na mre¾i. Ukoliko ste u "
-"dilemi, molimo vas da direktno \n"
-"kontaktirate distributera ili editora komponente. \n"
-"Prenos na treæe programe ili kopiranje takvih komponenti ukljuèujuæi i\n"
-"dokumentaciju je obièno zabranjen.\n"
-"\n"
-"\n"
-"Sva prava na komponente na sledeæim CD medijama pripadaju njihovim \n"
-"respektativnim autorima i za¹tiæene su zakonima o intelektuanoj svojini i \n"
-"pravima koji se primenjuju na softverske programe.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Xm,pojavila se gre¹ka"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Da li zaista hoæete da prekinete instalaciju?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "LIcencirani ugovor"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Upoznavanje\n"
-"\n"
-"Operativni sistem i druge komponente dostupne u Mandrake Linux "
-"distribuciji \n"
-"na dalje æe biti zvane \"Softverski Proizvodi\" . Softverski proizvodi "
-"ukljuèuju, ali nisu i \n"
-"ogranièeni na, skup programa, metoda, pravila i dokumentaciju koja je "
-"vezanaza operativni \n"
-"sistem i druge komponente Mandrake Linux distribucije.\n"
-"\n"
-"\n"
-"1. Licencni ugovor\n"
-"\n"
-"Pa¾ljivo proèitajte ovaj dokument. Ovaj dokument je licencni ugovor "
-"izmeðuizmeðu vas i   \n"
-"MandrakeSoft S.A. koji pola¾e pravo na Softverske Proizvode.\n"
-"Instaliranjem, kopiranjem ili upotrebom Softverskih Proizvoda u bilo kom "
-"vidu, vi eksplicitno \n"
-"prihvatate i potpuno se sla¾ete sa prihvatanjem postavki i uslova i stanja u "
-"ovoj Licenci. \n"
-"Ukoliko se ne sla¾ete sa bilo kojim delom Licence, nemate pravo da "
-"instalirate, kopirate ili koristite \n"
-"Softverske proizvode. \n"
-"Bilo koji poku¹aj instalacije, dupliciranja ili upotrebe Softverskih "
-"Proizvoda na naèin koji se ne sla¾e sa \n"
-"postavkama i uslovima ove Licence æe voditi gubitku va¹ih prava pod ovom \n"
-"Licencom. Na osnovu gubitka Licence, morate odmah uni¹titisve kopije \n"
-"Softverskih Proizvoda.\n"
-"\n"
-"\n"
-"2. Ogranièena Garancija\n"
-"\n"
-"Softverski Proizvodi i prateæa dokumentracija su omoguæene \"kao takve\", i "
-"bez garancije, do granica \n"
-"koje su dozvoljene zakonom.\n"
-"MandrakeSoft S.A. neæe, u svim uslovima i u granicama zakona, biti ogovoran "
-"za bilo koje specijalne,\n"
-"sluèajne, direktne ili indirektne ¹tete (ukljuèujuæi neogranièene¹tete ili "
-"gubitke \n"
-"u poslovanju, prekidu poslovanja, finansijskim gubicima, zakonske tra¾nje i "
-"kazne koje su rezultat sudske \n"
-"odluke, ili za bilo koji drugi gubitak) koje proizilaze iz upotrebe ili "
-"nemoguænosti kori¹æenja Softverskih \n"
-"Proizvoda, èak iako je MandrakeSoft S.A. savetovao i ukazivao na moguænost "
-"pojave takve \n"
-"¹tete.\n"
-"\n"
-"Ogranièena odgovornosti vezane za posedovanje ili upotrebu zabranjenog "
-"softvera u nekim zemljama\n"
-"\n"
-"Do granica koje su uslovljene zakonom, MandrakeSoft S.A. ili njegovi "
-"distributeri neæe, ni pod kojim uslovima, biti \n"
-"odgovorni za specijalne, namerne direktne ili indirektne ¹tete(ukljuèujuæi "
-"neogranièene \n"
-"¹tete ili gubitke u poslovanju, prekidu poslovanja, finansijskim gubicima, "
-"zakonske tra¾nje \n"
-"i kazne koje su rezultat sudske odluke, ili za bilo koji drugi gubitak) koje "
-"proizilaze \n"
-"iz upotrebe ili nemoguænosti kori¹æenja Softverskih Komponenti ili koje "
-"proizilaze download-ovanih softverskih komponenti \n"
-"bilo kog Mandrake Linux sajta koji su zabranjeni ili ogranièeni u nekim "
-"zemljama po lokalnim zakonima.\n"
-"Ova ogranièena prava se primenjuju, ali nisu i ogranièena na,kriptografske "
-"komponente \n"
-"koje se nalaze u Softverskim Proizvodima.\n"
-"\n"
-"\n"
-"3. GPL i za nju vezane Licence\n"
-"\n"
-"Softverski proizvodi se sastoje od komponenti kreiranih od strane razliètih "
-"lica ili entiteta. Veæina  \n"
-"od ovih komponenti se nalaze pod postavkama i uslovima GNU Op¹te Javne \n"
-"Licence, koja se od sada zove  \"GPL\", ili sliène licence. Veæina ovih "
-"licenci dozvoljava upotrebu, \n"
-"dupliciranje, adaptaciju ili redistribuciju komponenti koje one obuhvataju. "
-"Molimo Vas da pa¾ljivo proèitte postavke \n"
-"i uslove licencnog ugovora za svaku komponentu pre upotrebe bilo koje "
-"komponenete. Bilo koje pitanje \n"
-"vezano za licencu komponenti treba da bude adresirano na autora komponente a "
-"nena MandrakeSoft.\n"
-"Programi koje je razvio MandrakeSoft S.A. podle¾u pod GPL Licencu. "
-"Dokumentacija pisana od \n"
-"strane MandrakeSoft S.A. podle¾e pod posebnu licencu. Molim da pogledate "
-"dokumentaciju  \n"
-"za detalje.\n"
-"\n"
-"\n"
-"4. Prava na Intelektualnu svojinu\n"
-"\n"
-"Sva prava na komponente Softverskih proizvoda pripadaju njihovim autorima i "
-"ona \n"
-"su za¹tiæena zakonima o intelektualnoj svojini i pravima koji se primenjuju "
-"na softverske programe.\n"
-"MandrakeSoft S.A. je rezervisao svoja prava na modifikovanje ili adaptaciju "
-"SoftverskihProizvoda, kako za celinu tako i za \n"
-"delove, za sve sve svrhe i sve upotrebe.\n"
-"\"Mandrake\", \"Mandrake Linux\" i pridru¾eni logotipi i oznake MandrakeSoft "
-"S.A.  \n"
-"\n"
-"\n"
-"5. Zakonska prava \n"
-"\n"
-"Ukoliko se bilo koji deo ovog ugovora izbegava, nelegalno i van  sudske "
-"odluke, ovaj \n"
-"deo se iskljuèuje iz ovog ugvora. Obavezni ste da primenjujeteostale delove "
-"ovog\n"
-"ugovora.\n"
-"Postavke i uslovi ove Licence su odreðeni Zakonima Francuske.\n"
-"Svi nesporazumi bi trebali biti re¹eni van suda. Kao poslednje \n"
-"sredstvo, nesporazumi æe biti upuæeni na odgovarajuæe Sudske ustanove u "
-"Parizu - Francuska.\n"
-"Za bilo koje pitanje koje je vezano za ovaj dokument, kontaktirajte  "
-"MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Izaberite  raspored tastature."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ovde je predstavljena cela lista dostupnih tastatura"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Koju  instalacionu klasu birate ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalacija/A¾uriranje"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili a¾uriranje ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Preporuèeno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "A¾uriranje"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "A¾uriranje samo paketa"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Izaberite tip mi¹a."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port za mi¹a"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Izaberite na koji serijski port je va¹ mi¹ prikljuèen."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacija tastera"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 tastera"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "EmulaciÙa 3 tastera"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguri¹em PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfiguracija  IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Skeniranje particija za pronala¾enje taèke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Izaberite taèke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu proèitati tabelu particija, mnogo je iskvarena za mene :(\n"
-"Poku¹aæu dalje zaobilazeæi lo¹e particijeMogu poku¹ati da formatiram lo¹e "
-"particije (SVI PODACI æe biti izgubljeni !).\n"
-"Drugo re¹enje je da se DrakX onemoguæi da modufikuje tabelu particija.\n"
-"(gre¹ka je %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ne mo¾e da ispravno proèita tabelu particija.\n"
-"Dalji nastavak ide na va¹ rizik !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema slobodnog prostora za 1MB bootstrap! Instalacija ðe se nastaviti, ali "
-"da bi podigli va¹sistem, moraðete da kreirate bootstrap particiju u "
-"DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nije root particije potrebne za a¾uriranje"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root particija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Na kojoj particiji je root particija (/) va¹eg sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Treba da resetujete ma¹inu za primenu izmena u tabeli particija"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izaberi particije za formatiranje"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Proveri lo¹e blokove ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatiranje particiju"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiranje i formatiranje datoteke %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nema dovoljno swap-a da zavr¹i instalaciju, dodajte jo¹ swap-a"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Tra¾im pakete"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Tra¾im pakete za a¾uriranje..."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Va¹ sistem nema dovoljno mesta za instalaciju ili a¾uriranje (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporuèena (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molim Vas da izaberete uèitavanje ili snimanje selekcije paketa na disketu.\n"
-"Format koji se koristi je isti kao i kod  auto_install generisanih disketa."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Uèitaj sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Uèitavam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Odabir paketa"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadr¾i selekciju paketa"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Snimi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Selektovana velièina je veða od slobodnog prostora"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tip instalacije"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste selektovali nijednu grupu paketa\n"
-"Izaberite minimalnu instalaciju koju ¾elite"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Sa X-ovima"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporuka!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ukoliko imate gore navedene CD-ove, kliknite na  Ok.\n"
-"Ukoliko nemate nijedan CD, kliknite na  Cancel.\n"
-"Ako vam nedostaju  samo neki CD-ovi , deselektujte ix, a onda kliknite na Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom oznaèen kao \"%s"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram pakete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Postinstalaciona konfiguracija"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ubacite Boot disketu u ureðaj %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ubacite Update Modules disketu u ureðaj %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Zbog razlièitih op¹tix zahteva koji se odnose na ovaj  softver  kao i "
-"izlo¾enost\n"
-"mnogim zakonodavstvima,kupac i/ili korisnik softvera treba\n"
-"da proveri da li zakon omoguæava  download i upotrebu softvera.\n"
-"\n"
-"Kupci  i korisnici treba da znaju da ne trebada izvrdavaju\n"
-"zakon.Ukoliko se to  ipak desi, oni  æe snositi sankcije\n"
-"\n"
-"MandrakeSoft nije odgovoran za bilo kakve gubitke ili ¹tetekoje mogu nastati,"
-"niti za sudske kazne koje se mogu javiti.\n"
-"\n"
-"\n"
-"Za bilo kakva pitanja vezana za ovu temu kontaktirajte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sada imate moguænost da download-ujete a¾urirane pakete koji su\n"
-"kreirani nakon izlaska distribucije.\n"
-"\n"
-"Dobiæete sigurnosne ispravke ili ispravke u programima, ali za da bi ovo "
-"uradili morate\n"
-"da imate Internet konekciju.\n"
-"\n"
-"da li ¾elite da instalirate update-ove ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"KOntaktirajte Mandrake Linux web sajt da bi dobili listu dostupnih mirror-a"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kog æete skinuti pakete"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kantaktirajte mirror za listu moguæih paketa"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Koja je va¹a vremenska zona ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Va¹ sistemski (BIOS) èasovnik je pode¹en na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (preko NTP-a)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Bez ¹tampaèa"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Da li imate ISA zvuènu karticu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" nakon isntalacije da bi podesili svoju zvuènu karticu"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije detektovana zvuèna kartica. Pokrenite \"harddrake\" nakon instalacije"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sa¾etak"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mi¹"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "©tampaè"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvuèna kartica"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV katica"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Unesi root lozinku"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez lozinke"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ova lozinka je suvi¹e jednostavna (treba da ima bar %d znakova)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domen"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Startni disk obezbeðuje naèin podizanja va¹eg Linux sistema bez zavisnosti\n"
-"od normalnog startera. Ovo je korisno ako ne ¾elite da instalirate\n"
-"SILO(ili grub) na va¹ sistem, ako drugi operativni sistem ukloni SILO, ili "
-"SILO ne\n"
-"radi sa va¹im hardverom. Startni disk mo¾ete koristiti sa Mandrake Linux\n"
-"'diskom za spasavanje', ¹to olak¹ava oporavak u sluèaju te¾e havarije.\n"
-"Ukoliko ¾elite da kreirate startnu disketu za va¹ sistemubacite disketu u "
-"pogon i pritisnite \"Da\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prvi flopi/disketni ureðaj "
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Drugi flopi/disketni ureðaj"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Preskoèi"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Startni disk obezbeðuje naèin podizanja va¹eg Linux sistema bez zavisnosti\n"
-"od normalnog startera. Ovo je korisno ako ne ¾elite da instalirate\n"
-"LILO(ili grub) na va¹ sistem, ako drugi operativni sistem ukloni LILO, ili "
-"LILO ne\n"
-"radi sa va¹im hardverom. Startni disk mo¾ete koristiti sa Mandrake Linux\n"
-"'diskom za spasavanje', ¹to olak¹ava oporavak u sluèaju te¾e havarije.\n"
-"Da li biste da kreirate startnu disketu za va¹ sistem?"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(UPOZORENJE! Vi koristite XFS za va¹u root particiju,\n"
-"pa kreiranje startnog 1.44 Mb flopija verovatno neæe uspeti,\n"
-"zato ¹to XFS tra¾i veliki drajver)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ti malera, nema diskete"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Izabrerite disketni ureðaj koji æete koristiti  za kreiranje starne diskete"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ubacite disketu u ureðaj %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Kreiram startni disk..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripremam starter..."
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Po¹to izgleda da imate staromodnu ili nepoznatu \n"
-" ma¹inu, yaboot starter neðe raditi kod vas.\n"
-"Instalacija ðe biti nastavljena, ali ðete morati da\n"
-" BootX da bi podigli sistem"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Da li ¾elite da koristite aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gre¹ka pri instalaciji aboot-a, \n"
-"Da li da probam da instaliram èak ako to vodi uni¹tenju prve particije?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaliram starter"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija startera neuspela. Gre¹ka je:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Moraæete da promenite Open Firmware boot-ureðaj da \n"
-" bi mogli da koristite starter.  Ukoliko ne vidite prompt\n"
-" pri restartu dr¾ite Command-Option-O-F pri startanju i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Onda ukucajte: shut-down\n"
-"Kada sledeæi put startujete ma¹inu trebali bi da vidite staterov prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u ureðaj %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Kreiram auto instalacioni flopi"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Neki koraci nisu kompletirani.\n"
-"\n"
-"Da li stvarno ¾elite da zavr¹ite ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Èestitamo, instalacija je zavr¹ena.\n"
-"Izvadite disketu iz drajva i pritisnite <Enter> da se raèunar resetuje.\n"
-"\n"
-"\n"
-"Za informacije o popravkama koje su na raspolaganju za ovo izdanje\n"
-"Mandrake Linux Linux-a, proèitajte deo 'Errata' koji mo¾ete naæi na\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacije o konfigurisanju va¹eg sistema mo¾ete naæi u post-instalacionom\n"
-"poglavlju zvaniènog Mandrake Linux 'Vodièa za korisnike'."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Kreiraj auto instalacionu disketu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto instalacija mo¾e biti potpuno automatizovana ukoliko ¾elite,\n"
-"u tom sluèaju preuzeæe kontrolu nad hard-diskom!!\n"
-"(ovo se odnosi na instalaciju na drugoj ma¹ini).\n"
-"\n"
-"Mo¾da volite da ponovite instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatski"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ponavljanje"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Saèuvaj selekciju paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab>/<Alt-Tab> kret. izmeðu elemenata | <Space> izbor | <F12> sledeæi ekran"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "nedostaje kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Izaberite fajl"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Osnovno"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Samo momenat..."
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Pro¹iri stablo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Skupi stablo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Birajte: ravno ili grupno sortirano"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Lo¹ izbor, probajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Va¹ izbor ? (po default-u %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Unosi koje treba da popunite:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Va¹ izbor? (0/1, default `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Taster `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Da li ¾elite da kliknete na ovaj taster? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Va¹ izbor? (default `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari za izbor iz (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Izaberite prvi broj od 10 koje ¾elite da editujete,\n"
-"ili samo kliknite na Enter da bi nastavili.\n"
-"Va¹ izbor? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Napomena, promenjeno ime:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Re-submit"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Èe¹ki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Nemaèki"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "©panski"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finski"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francuski"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norve¹ki"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poljski"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruski"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "©vedski"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK tastatura"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US tastatura"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanski"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Jermenski (stari)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Jermenski (typewriter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Jermenski (fonetski)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejdzan  (latinica)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgijski"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bugarski (fonetski)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bugarski (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilski (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Beloruski"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "©vajcarski (Nemaèki raspored)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "©vajcarski (Francuski  raspored)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Èe¹ki (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Nemaèki (bez mrtvih tastera)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danski"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norve¹ki)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (©vedski)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonski"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijski (\"Ruski\" raspored)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijski (\"Latinièni\" rapored)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grèki"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Maðarski"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Hrvatski"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Jevrejski"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Jevrejski (Fonetski)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranski"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandski"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italijanski"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanski 106 tastera"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino-Amerièki"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanski AZERTY(stari)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanski AZERTY(novi)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanski \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanski \"fonetski\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Letonski"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonski"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Danski"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poljski (qwerty raspored)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poljski (qwertz raspored)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalski"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadski (Kvebek)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunski (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunski (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruski (Javerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenaèki"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaèki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaèki (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srpski (æirilica)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilski"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr " Thai tastatura"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tad¾ikistanska tastatura"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turski (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turski (moderni \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinski"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US tastatura (internacionalna)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamski  \"number row\"QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Srpski (latinica)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "Dobavi Windows fontove"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kru¾no montiranje  %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Ukloni prvo logièke volumene\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA podr¹ka ne postoji vi¹e za 2.2 kernele. Koristite 2.4 kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun Mi¹"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generièki PS2 mi¹ sa toèkiæem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 taster"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generièki 2 tastera mi¹"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Toèkiæ"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generièki 3 tastera mi¹"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC serija (serijski)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM serija"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus mi¹"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tastera"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tastera"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nijedan"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nema mi¹a"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Molim Vas da testirate mi¹a"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Da bi mogli da aktivirate mi¹a"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "pomerite toèkiæ !"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sledeæi  ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Prethodni"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektuj na internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najèe¹æi naèin za konekciju sa adsl je pppoe.\n"
-"Meðutim, postoje konekcije koje koriste pptp i neke koje koriste dhcp.\n"
-"Ukoliko ne znate koja je, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcpd"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Kog dhcp klijenta ¾elite da koristite ?Postavljeni je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije detektovana nijedna mre¾na kartica.\n"
-"Ne mogu da podesim ovaj tip konekcije."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Izaberite mre¾ni interfejs"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Izaberite mre¾ni adapter koji ¾elite da koristite za konekciju na internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Nije pronaðena mre¾na kartica"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Pode¹avanje mre¾e"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molim unesite  ime hosta ukoiko ga znate\n"
-"'Neki DHCP serveri zahtevaju ime hosta da bi radili.\n"
-"Va¹e ime hosta treba da bude puno ime kao npr.\n"
-"``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ime hosta:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "èarobnjak za pode¹avanje mre¾e"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksterni ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna  ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kakva je vrsta va¹e ISDN kenekcije ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju vi¹e preferirate?\n"
-"\n"
-"* Stara kofiguracja koristi isdn4net. Ona sadr¾i moðne alatke, ali je\n"
-"  problematièna za pode¹avanje pogotovo za poèetnike, i nije uobièajena.\n"
-"\n"
-"* Nova konfiguracija je jednostavnija za razumeti, standardnija,\n"
-"  ali sa manje opcija i alata.\n"
-"\n"
-"Mi preporuèujemo lak¹u (jednostavniju) konfiguraciju.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguracija"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite svog provajdera.\n"
-" Ukoliko nije na listi, izaberite Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Evropski protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za statak sveta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za Ostatak sveta \n"
-" bez D-kanala (zakupljene linije)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol ¾elite da koristite ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kakvu vrstu kartice imate?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ukoliko imate ISA karticu, vrednosti na sledeæem ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ukoliko imate PCMCIA karticu, morate znati  irq i  io za va¹u karticu.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Prekini"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Nastavi"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Koja je va¹a ISDN kartica ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Detektovana je ISDN PCI kartica, nepoznatog tipa. Izaberite jednu PCI "
-"karticu na sledeæem ekranu."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Nije pronaðena ISDN PCI kartica.Izaberite jednu na sledeæem ekranu."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Izaberite serijski port  na koji je modem povezan."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Dialup opcije"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ime konekcije"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Broj telefona"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID za logovanje"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Bazirano na skripti"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Bazirano na terminalu"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ime domena"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS Server (opcija)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS Server (opcija)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Mo¾ete se diskonektovati ili rekonfigurisati konekciju."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Podesi internet konfiguraciju"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste konektovani na Internet"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sada se mo¾ete konektovati na Internet ili rekonfigurisati konekciju"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Trenutno niste konektovani na Internet"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektuj"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Diskonektuj"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Podesi konekciju"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija i  konfiguracija"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada treba da podesimo %s konekciju."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada treba da podesimo %s konekciju.\n"
-"\n"
-"\n"
-"Pritisnite \"U redu\" za nastavak."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Pode¹avanje mre¾e"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Zbog toga ¹to radite mre¾nu instalaciju, va¹a mre¾a je veæ pode¹ena "
-"pode¹ena.\n"
-"Kliknite na  OK  zadrd¾ali konfiguraciju Network/Internet konekcije, ili "
-"cancel da bi ponovo uradili kofiguraciju.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobrodo¹li u program za Pode¹avanje Mre¾ne konekcije\n"
-"\n"
-"Sada treba da konfiguri¹emo va¹u internet/mre¾nu konekciju.\n"
-"Ukoliko ne ¾elite auto detekciju, deselektujte opciju.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za konfigurisanje"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detektujem  ureðaje..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "Detektovano na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektovano %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "Detektovano na interfejsu %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Detektovana je kablovska konekcija "
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN konekcija"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "detektovana mre¾na kartica(e)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite tip konekcije koji ¾elite da koristite"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vi ste podesili vi¹e naèina za konektovanje na Internet.\n"
-"Izaberite jedan od njih koji ¾elite da koristite.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet konekcija"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li ¾elite da startujete konektovanje pri startanju sistema ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Pode¹avanje mre¾e"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Mre¾a mora biti restartovana"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Pojavio se problem tokom restartovanja mre¾e?\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"èestitamo, mre¾na i internet konfiguracija je zavr¹ena.\n"
-"\n"
-"Konfiguracija se sada mo¾e primeniti na sistem.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Kada se to uradi, trebali bi da restartujete X\n"
-"okru¾enje da bi izbegli probleme sa promenom hostname-a."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Pojavili su se problemi tokom konfiguracije.\n"
-"Proverite svoju konekciju preko net_monitor ili mcc. Ukoliko va¹a konekcija "
-"ne radi, treba da ponovite konfiguraciju"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Upozorenje: Ovaj ureðaj je veæ prethodno konfigurisan za konektovanje na "
-"Internet.\n"
-"Samo prihvaitite da bi postavku ostavili istom.\n"
-"Izmena polja koje vidite æe poni¹titi postojeæu konfiguraciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molim unesite IP konfiguraciju za ovu ma¹inu.\n"
-"Svaka stavka treba de bude tavka treba da bude uneta kao\n"
-"IP adresa (na primer, 123.45.67.89)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Pode¹avanje mre¾nog ureðaja %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(drajver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Mre¾na maska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatski IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba da bude u formatu 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molim unesite ime va¹eg domena, ime hosta, kao IP adrese dodatnih\n"
-"'nameserver'-a. Ime va¹eg hosta treba da bude puno kvalifikovano ime hosta,\n"
-"kao na pr.  ``mybox.mylab.myco.com''.\n"
-"Ako nemate dodatnih 'nameserver'-a, ostavite ta polja prazna."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (e.g. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway ureðaj"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Pode¹avanje proksija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Track mre¾na kartica id (korisno za laptop raèunare)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy treba da bude http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba da bude ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Konfiguracija interneta"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li hoæete da se konektujete na internet sada?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testiranje konekcije..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistem je trenutno konektovan na Internet"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, on æe sada biti diskonektovan."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Izgleda da sistem nije konektovan na Internet.\n"
-"Probajte da promenite konfiguraciju."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfiguracija Internet konekcije"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Molim VAS da popunite ili oznaèite polja ispod"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "(DMA) kartice"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr " IO kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr " IO_0 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Va¹ lièni broj telefona"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Ime provajdera (npr. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provajderov dns 1 (opciono)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provajderov dns 2 (opciono)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Izaberi svoju zemlju"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Mod za biranje"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Brzina konekcije "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Vreme pauze konekcije (u sek.)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Logovanje za raèun (korisnièko ime)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Lozinka za raèun"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montiranje nije uspelo: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particija nije podr¾ana na ovoj platformi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate prazninu u va¹oj tabeli particija ali je ne mogu korisiti.\n"
-"Jedino re¹enje je da pomerite primarnu particiju tako da praznina bude\n"
-"do extended particija"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Otvaranje iz datoteke %s nije uspelo: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Lo¹e backup-ovana datoteka"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gre¹ka kod unosa u datoteka %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ne¹to lo¹e se de¹ava sa va¹im hard diskom. \n"
-"Test integriteta podataka nije pro¹ao. \n"
-"To znaèi da sve ¹to se nalazi na disku æe zavr¹iti kao ðubre"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "mora imati"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "va¾no"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "veoma lepo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "lepo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mo¾da"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Op¹ti Unix-ov sistem za ¹tampanje"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nove Generacije"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Demon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - ©tampaj, nemoj da pamti¹"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokalni  ¹tampaè"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Udaljeni ¹tampaè"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "©tampaè ili Udaljeni CUPS server"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "©tampaè ili Udaljeni lpd server"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Mre¾ni ¹tampaè (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "©tampaè na SMB/Windows 95/98/NT serveru"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "©tampaè na NetWare serveru"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Unesite URI za ¹tampaè"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Ubaci naredbu u komandu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nepoznati model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokalni ¹tampaèi"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Udaljeni ¹tampaèi"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na parelelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB ¹tampaè \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multi-funkcionalni ureðaj na paralelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multi-funkcionalni ureðaj na USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-fuunkcionalni ureðaj na HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multi-funkcionalni ureðaj"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", ¹tampaj na %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serverr \"%s\", ¹tampaè \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na Windows server \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell server \"%s\", ¹tampaè \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", koristim komandu %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raw ¹tampaè (bez drajvera)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na ovoj ma¹ini)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS server \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Podrazumevano)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izbor povezanosti ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je ¹tampaè povezan?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"©tampaèe na udaljenom CUPS serveru nemate da bi ih ovde podesili; ovi "
-"¹tampaèi æe biti automatski detektovani."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS konfiguracija"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Odredite CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Da bi dobili pristup ¹tampaèima na udaljenim CUPS serverima na va¹oj "
-"lokalnoj mre¾ine morate ni¹ta da pode¹avate; CUPS serveri automatski "
-"obave¹tavaju va¹u ma¹inuo svojim ¹tampaèima. Svi ¹tampaèi koji su trenutno "
-"poznati va¹oj ma¹ini su prikazani u \"Remote printers\" delu  glavnog "
-"prozora Printerdrake-a. Kada va¹ CUPS server nije na lokalnoj ma¹ini, morate "
-"uneti CUPS serverovu IP adresu a opciono broj porta da bi dobili informacije "
-"o ¹tampaèu od servera, ili ove linije za unos ostavite praznima."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Obièno CUPS je automatski pode¹en na osnovu mre¾nog okru¾enja, tako da "
-"mo¾ete pristupiti ¹tampaèima na CUPS serverima na va¹oj lokalnoj mre¾i. "
-"Ukoliko ovo ne funkcioni¹e kako treba, iskljuèite \"Automatsku CUPS "
-"konfiguraciju\" u izmenite va¹ fajl /etc/cups/cupsd.conf ruèno. Ne "
-"zaboravite da nakon toga restartujete CUPS (komanda: \"service cups restart"
-"\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba da izgleda kao npr. 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Broj porta bi trebao da bude broj !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "SMB server IP:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatska CUPS konfiguracija"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Detektujem ureðaje..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testiranje portova"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Dodajte novi ¹tampaè"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Dobrodo¹li u Èarobnjak za konfigurisanje ¹tampaèa\n"
-"\n"
-"Ovaj èarobnjak æe vam omoguæiti da instalirate lokalne ili udaljene ¹tampaèe "
-"sa ovema¹ine kao i drugih ma¹ina na mre¾i.\n"
-"\n"
-"Od vas æe biti tra¾ene sve neophodne informacije za pode¹avanje ¹tampaèa a "
-"dobiæete pristup svim dostypnim drajverima, njihovim opcijama, i tipovima "
-"konekcije ¹tampaèa."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokalni ¹tampaè"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Doborodo¹li u Èarobnjak za konfigurisanje ¹tampaèa\n"
-"\n"
-"Ovaj èarobnjak æe vam pomoæi da instalirate va¹ ¹tampaè(e) povezan(e) na "
-"ovaj raèunar.\n"
-"\n"
-"Prikljuèite va¹ ¹tampaè(e) u raèunar i ukljuèite ga(ih). Kliknite na on "
-"\"Sledeæe\" kada budete spremni, a \"Poni¹ti\" kada ne ¾elite da pode¹avate "
-"¹tampaè(e).\n"
-"\n"
-"Zapamtite da neki raèunari mogu da se blokiraju tokom auto-detekcije, "
-"iskljuèite  \"Auto-detekciju ¹tampaèa\" da bi ruèno instalirali ¹tampaè. "
-"Koristite \"Ekspert mod\" u printerdrake kada ¾elite  da podesite¹tampanje "
-"na udaljenom ¹tampaèu koji nije automatski prikazan."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Auto-detekcija ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Èestitamo, ba¹ ¹tampaè je sada instaliran i pode¹en!\n"
-"\n"
-"Mo¾ete da ¹tampate koristeæi \"©tampaj\" komandu u va¹oj aplikaciji (obièno "
-"u \"Fajl\" meniju).\n"
-"\n"
-"Ukoliko ¾elite da dodate, uklonite ili promenite ime ¹tampaèu, ili ¾elite da "
-"promenite default opcije (papir, kvalitet ¹tampanja, ...), izaberite "
-"\"©tampaè\" u \"Hardver\" sekciji Mandrake Kontrolnog Centra."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Auto-detekcija ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake je u moguænosti da auto-detektuje va¹ lokalno vezan paralelni "
-"ili USB ¹tampaè umesto vas, ali imajte na umu da auto-detekcija MO®E "
-"BLOKIRATI VA© SISTEM A TO MO®E VODITI O©TEæENJU FAJL SISTEMA! Radite ovo ali "
-"na  SOPSTVENI RIZIK!\n"
-"\n"
-"Da li ¾elite da auto-detektujete ¹tampaè?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Izaberite korisnike ruèno"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detektovan %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "©tampaè na paralelnom portu \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB ¹tampaè \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Nije pronaðen lokalni ¹tampaè! Da bi ruèno instalirali ¹tampaè unesite ime "
-"ureðaja/ime fajla u liniji za unos (Paralelni portovi: /dev/lp0, /dev/"
-"lp1, ..., je ekvivalentno LPT1:, LPT2:, ..., prvi USB ¹tampaè: /dev/usb/lp0, "
-"drugi USB ¹tampaè: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Morate uneti ureðaj ili ime fajla!"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Nije pronaðen lokalni ¹tampaè!"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Mre¾ni ¹tampaèi mogu biti instalirani nakon instalacije sistema. Izaberite "
-"\"Hardver\" a onda \"©tampaè\" u Mandrake Kontrolnom Centru."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Da bi instalirali mre¾ne ¹tampaèe, kliknite \"Poni¹ti\", preðite na "
-"\"Ekspert mod\", i kliknite \"Dodajte novi ¹tampaè\" ponovo."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Prikazani ¹tampaè je auto-detektovan, a ukoliko to nije onaj koji ¾elite da "
-"podesite, unesite ime/ime fajla ureðaja u liniju za unos"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Ovde se nalazi lista svih auto-detektovanih ¹tampaèa. Izaberite ¹tampaè koji "
-"¾elite ili unesite imeime fajla ureðaja u liniji za unos"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Prikazani ¹tampaè je auto-detektovan. Pode¹avanje ¹tampaèa æe biti potpuno "
-"automatsko. Ukoliko va¹ ¹tampaè nije ispravno detektovan ili ¾elite da sami "
-"pode¹avate ¹tampaè, ukljuèite \"Ruèna konfiguracija\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Ovde se nalazi lista svih auto-detektovanih ¹tampaèa. Izaberite ¹tampaè koji "
-"æelite da podesite. Pode¹avanje ¹tampaèa æe biti potpuno automatsko. Ukoliko "
-"va ¹tampaè nije pravilno detektovan ili vi¹e ¾elite da ga sami podesite, "
-"ukljuèite \"Ruèna konfiguracija\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Izaberite port na koji je va¹ ¹tampaè povezan ili unesite ime/ime fajla "
-"ureðaja u liniju za unos"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Izaberite port na koji je va¹ raèunar povezan."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalenti su LPT1:, "
-"LPT2:, ..., prvi USB ¹tampaè: /dev/usb/lp0, drugi USB ¹tampaè: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate iabrati/uneti ¹tampaè/ureðaj!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ruèna konfiguracija"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Da li je va¹ ¹tampaè multi-funkcionalni ureðaj iz HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 sa skenerom)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instaliram HPOJ paket..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Proveravam ureðaj i pode¹avam HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instaliram SANE paket..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skeniram na va¹em HP multi-funkcionalnom ureðaju"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Kreiram port dostupan za CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Uèitavam CUPS bazu podataka..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcije za udaljeni lpd"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Da bi koristili udaljeni lpd ¹tampaè, morate da obezbedite ime hosta za "
-"server za ¹tampanje kao i ime ¹tampaèa na tom serveru."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Ime udaljenog host-a"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ime udaljeni ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nedostaje ime udaljenog host-a!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nedostaje ime udaljenog ¹tampaèa!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)  opcije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Da biste mogli da ¹tampate na SMB ¹tampaèu, treba da navedete\n"
-"ime hosta (koje nije uvek isto kao TCP/IP ime ma¹ine);\n"
-"IP adresu ¹tampaèevog servera; deljeno ime ¹tampaèa kome pristupate,\n"
-"kao i potrebna korisnièka imena i lozinke."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB server  host:"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB server IP:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Deljeno (zajednièko)  ime :"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Radna grupa(Workgroup):"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Morate dati ili ime servera ili njegov IP!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Nedostaje deljeno ime za Samba-u!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare opcije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Da biste mogli da ¹tampate na NetWare ¹tampaè, treba da navedete ime  "
-"NetWare servera za ¹tampaè (koje nije uvek isto kao TCP/IPhostname! );te  "
-"ime 'reda' ¹tampaèa kome pristupate,kao i potrebna korisnièka imena i "
-"lozinke."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Server ¹tampaèa:"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Print Queue ime:"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Nedostaje ime NCP servera!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nedostaje ime za NCP red!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket Opcije ©tampaèa"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Da bi ¹tampali na TCP ili socket ¹tampaè, morate da obezbedite ime hosta za "
-"¹tampaèa te (opcija) broj porta. Na HP JetDirect serverima broj porta je "
-"obièno 9100, a na drugim serverima mo¾e biti drugaèiji. Pogledajte upustvo "
-"koje ste dobili uz hardver."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Ime hosta za ¹tampaè"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nedostaje ime hosta!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Ureðaj za ¹tampaè URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Mo¾ete direktno odrediti URI za pristup ¹tampaèu. URI mora ispunjavati ili "
-"CUPS ili Foomatic specifikacije. Zapamtite da nisu svi URI tipovi podr¾ani."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Morate uneti validan URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svaki ¹tampaè mora da ima ime (na primer \"¹tampaè\"). Polja za Opis i "
-"Lokaciju ne moraju biti popunjena. To su samo korisne napomene za korisnike."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Ime ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu podataka za ¹tampaèe..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Va¹ model ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake je uporeðivao ime modela dobijenog autodetekcijomsa modelima "
-"prikazanim u njegovoj bazi podataka da bi prona¹ao odgovarajuæi. Ovaj izbor "
-"mo¾e biti pogre¹an, posebno kada se va¹ ¹tampaè uop¹tene nalazi u bazi "
-"podataka. Zato proverite da je izbor ispravan i kliknite \"Ovaj model je "
-"ispravan\" ukoliko jeste a ukoliko nije, kliknite \"Ruèno izaberite model\" "
-"da bi mogli da sami izaberete ¹tampaè na sledeæem ekranu.\n"
-"\n"
-"Za va¹ ¹tampaè Printerdrake je prona¹ao:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Ovaj model je taèan"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Ruèno izaberite model"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Selekcija modela ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Koju model ¹tampaèa imate?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Proverite da li je Printerdrake auto-detektovao va¹ ¹tampaè korektno. "
-"Potra¾ite pravi model na listi kada kursor stoji na pogre¹no izabranom "
-"modelu ili na \"Raw ¹tampaè\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ukoliko se va¹ ¹tampaè ne nalazi na listi, izaberite kompatibilni "
-"(pogledajte upustvo za ¹tampaè) ili  slièan njemu."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI win ¹tampaè konfiguracija"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Treba da podesite  OKI laserski win ¹tampaè. Ovi ¹tampaèi\n"
-"koriste veoma specijalizovane komunikacione protokole i zbog toga oni rade "
-"samo kada su povezani na prvi paralelni port. Kada je va¹ ¹tampaè povezan na "
-"drugi port ili na server pove¾ite ¹tampaè na prvi paralelni port pre nego "
-"i¹tampate test stranicu ili va¹ ¹tampaè neæe raditi. Postavke za va¹ tip "
-"konekcije æe biti ignorisane od strane drajvera."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Konfiguracija Lexmark inkjet ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Drajveri za inkjet ¹tampaèe koje je obezbedio Lexmark samo podr¾avaju "
-"lokalne ¹tampaèe, a ne i ¹tampaèe na udaljenim ma¹inama ili print serverima. "
-"Pove¾ite va¹ ¹tampaè na lokalni port ili ga podesite na ma¹ini na koju je "
-"povezan."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Da bi mogli da ¹tampate na va¹em Lexmark inkjet ¹tampaèu morate da imate "
-"drajvere koje je kreirao Lexmark (http://www.lexmark.com/). Idite na US sajt "
-"i kliknite na taster \"Drajveri\". nakon toga izaberite va¹ model i "
-"operativni sistem, u va¹em sluèaju \"Linux\". Drajveri su upakovani u RPM "
-"pakete ili shell skripte sa interaktivnom grafièkom instalacijom. Ne morate "
-"da dradite ovu konfiguraciju. Pritisnite Cancel odmah nakon Ugovora o "
-"licenci. Onda i¹tampajte printhead alignment stranice sa \"lexmarkmaintain\" "
-"a podesite opcije za polo¾aj glave sa ovim programom."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"default opcije za ¹tampaè\n"
-"\n"
-"Proverite da li su velièina papira i vrsta tinte/mod ¹tampanja (ukoliko je "
-"dostupan) kao i hardverska konfiguracija za laserske ¹tampaèe (memorija, "
-"duplex jedinica, dodatne kasete) pode¹eni ispravno. Imajte na umu da pri "
-"visokom kvalitetu ¹tampe/rezoluciji ¹tampe ¹tampanje mo¾e biti znaèajnije "
-"usporeno."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcije %s van opsega!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li ¾elite da podesite ovaj ¹tampaè (\"%s\")\n"
-"kao default ¹tampaè?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testiranje stranica"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Izaberite test sranicu koju ¾elite da ¹tampate.\n"
-"Napomena: Ukoliko se radi o foto test stranici mo¾e biti potrebno mnogo vi¹e "
-"vremena da bi se i¹tampala a laserski ¹tampaèi sa malo memorije je èak neæe "
-"ni i¹tampati. U veæini sluèajeva dovoljno je da i¹tampate standardnu test "
-"stranicu."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Bez test stranice"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "©tampaj"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardna test stranica"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna test stranica"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alteernativna test stranica (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto test stranica"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Nemoj da ¹tampaj bilo koju test stranicu"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "©tampam test stran(ice)u..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Test stran(ice)a je poslana ¹tampaè demonu.\n"
-"To mo¾e dovesti do malog odlaganja starta ¹tampaèa.\n"
-"Status ¹tampaèa:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Test stran(ice)a je poslana ¹tampaè demonu.\n"
-"To mo¾e dovesti do malog odlaganja starta ¹tampaèa.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Da li radi ispravno?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Raw ¹tampaè"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Da bi ¹tampali fajl iz komandne linije (ili prozora terminala) mo¾ete ili "
-"koristiti komandu \"%s <fajl>\" ili prafièki alat za ¹tampanje: \"xpp <fajl>"
-"\" ili \"kprinter <fajl>\". Grafièki alati vam dozovoljavaju da izaberete "
-"¹tampaè i izmenite opcije veoma lako.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande takoðe mo¾ete koristiti u polju \"Komande za ¹tampanje\" "
-"dijaloga za ¹tampanje u veæem broju aplikacija, ali ovde nemojte da "
-"odreðujete ime fajla jer njega postavlja sama aplikacija iz koje ¹tampate.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" takoðe dozvoljava izmenu opcija za konkretni posao ¹tampanja. "
-"Jednostavno dodajte ¾eljene ocije u komandnu liniju, e. g. \"%s <fajl>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Da bi znali koje su vam opcije dostupne za tekuæi ¹tampaè proèitajte listu "
-"koja je dole prikazana ili kliknite na taster \"Listu opcija za ¹tampanje\".%"
-"s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Ovde se nalazi lista dostupnih opcija za ¹tampanje za tekuæi ¹tampaè:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Da bi ¹tampali fajl iz komandne linije (prozora terminala) koristite komandu "
-"\"%s <fajl>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ova komanda vam je dostupna i u polju \"Konade za ¹tampanje\" dijaloga za "
-"¹tampanje u veæini aplikacija. Ali u tom sluèaju nemojte da upisujete ime "
-"fajla jer je ono veæ dodeljeno od strane aplikacije.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Da bi dobili listu dostupnih opcija za trenutni ¹tampaè kliknite na taster "
-"\"Lista opcija ¹tampaèa\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Da bi ¹tampali fajl iz komandne linije (prozora terminala) koristite komandu "
-"\"%s <fajl>\" ili \"%s <fajl>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Takoðe mo¾ete da koristite i grafièki interfejs \"xpdq\" za opcije za "
-"pode¹avanje poslova ¹tampanja.\n"
-"Ako koristite KDE kao desktop okru¾enje imate \"panièno dugme\", ikonicu na "
-"desktopu, oznaèenu sa \"ZAUSTAVI ©tampaè!\",koji zaustavlja sve poslove "
-"¹tampanja jkada kliknete na taj taster. Ovo je na primer korisno kada se "
-"zaglavi papir.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komande \"%s\" i \"%s\" takoðe omoguæavaju izmenu opcija za konkretni posao "
-"¹tampanja. Jednostavno dodajte ¾eljene opcije u komandnu liniju, e. g. \"%s "
-"<fajl>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "©tampam/Skeniram na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "©tampam na ¹tampaèu \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista sa opcijama za ¹tampaè"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Va¹ HP multi-funkcionalni ureðaj je automatski pode¹en da bi mogao da "
-"skenira. Sada mo¾ete da skenirate sa \"scanimage\" (\"scanimage -d hp:%s\" "
-"da bi odredili skener koda imate vi¹e od jednog) iz komandne linije ili sa "
-"grafièkim interfejsima \"xscanimage\" ili \"xsane\". Ukoliko koristite the "
-"GIMP, mo¾ete takoðe skenirati biranjem odgovarajuæe stavke u \"Fajle\"/"
-"\"Acquire\" meniju. Pogledajte i \"man scanimage\" i \"man sane-hp\" u "
-"komandnoj liniji za vi¹e informacija.\n"
-"\n"
-"Ne koristi \"scannerdrake\" za ovaj ureðaj!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Va¹ HP multi-funkcionalni ureðaj je automatski pode¹en da bi bio u "
-"moguænosti da skenira. Sada mo¾ete da skenirate iz komandne linije sa  "
-"\"ptal-hp %s scan ...\". Skeniranje iz grafièkog interfejsa ili iz GIMP-a "
-"nije podr¾ano jo¹ uvek za va¹ ureðaj. Vi¹e informacija mo¾ete pronaæi u  \"/"
-"usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" fajlu na va¹em sistemu. Ukoliko "
-"imate HP LaserJet 1100 ili 1200 mo¾ete skenirati samo ako imate instaliranu "
-"skener opciju.\n"
-"\n"
-"Ne koristi \"scannerdrake\" za ovaj ureðaj!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Uèitavam podatke za ¹tampaè ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Konfiguracija za transfer ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mo¾ete kopirati konfiguraciju ¹tampaèa koju ste zavr¹ili za spooler %s to %"
-"s, va¹ trenutni spooler. Svi konfiguracioni podaci (ime ¹tampaèa, opis, "
-"lokacija, tip konekcije, i default opcije) se mogu preuzeti, ali ne i "
-"poslovi ¹tampanja.\n"
-"Ni svi queues ne mogu biti prebaèeni zbog sledeæih razloga:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podr¾ava ¹tampaèe na Novell serverima ili ¹tampaèima koji ¹alju "
-"podatke u slobodno-formiranu komandu.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podr¾ava samo lokalne ¹tampaèe, udaljene LPD ¹tampaèe, i Socket/TCP "
-"¹tampaèe.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podr¾avaju IPP ¹tampaèe.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Kao dodatak, queues koji su kreirani sa ovim programom ili  \"foomatic-"
-"configure\" ne mogu biti prebaèeni."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Takoðe, ¹tampaèi konfigurisani sa PPD fajlovima koji potièu od proizvoðaèa "
-"ili sa osnovnim CUPS drajverima ne mogu biti prebaèeni."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Oznaèite ¹tampaèe koje ¾elite da prebacite i kliknite na \n"
-"\"Prebaci\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Ne prebacuj ¹tampaèe"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Prebaci"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"©tampaè \"%s\" veæ postoji pod  %s. \n"
-"Klikni na \"Prebaci\" da bi pre¹li preko starog.\n"
-"Mo¾ete ukucati i novo ime ili preskoèiti ovaj ¹tampaè."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ime ¹tampaèa treba da sadr¾i samo slova, brojeve i underscore"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"©tampaè \"%s\" veæ postoji,\n"
-"da li stvarno ¾elite da ponovo upi¹ete njegove opcije?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novo ime ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transferi¹em %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Prebacili ste svoj biv¹i default ¹tampaè (\"%s\"), Da li treba da bude "
-"ponovo default ¹tampaè pod novim sistemom za ¹tampanje %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Osve¾avam podatake o ¹tampaèu..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Pode¹avanje udaljenog ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Startujem mre¾u ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Podesi mre¾u sada"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Mre¾na funkcionalnost nije pode¹ena"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Treba da podesite udaljeni ¹tampaè. Za to vam je potreban mre¾ni pristup, "
-"ali va¹a mre¾a nije jo¹ pode¹ena. Ukoliko nastavite bez mre¾e konfiguracije, "
-"neæete moæi da koristite ¹tampaè koji sada pode¹avate. Kako ¾elite da "
-"nastavite?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Nastavi dalje bez pode¹avanja mre¾e"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Mre¾na konfiguracija koja je kreirana tokom instalcije ne mo¾e sada da se "
-"pokrene. Proverite da li je mre¾a dostupna nakon restarta sistema i "
-"ispravite konfiguraciju koristeæi Mandrake CKontrolni Centar, sekcija "
-"\"Mre¾a & Internet\"/\"Konenkcija\", i nakon toga podesite ¹tampaè, takoðe "
-"kori¹tenjem Mandrake Kontrolnog Centra, sekcija \"Hardver\"/\"©tampaè\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Mre¾ni pristup nije pokrenut i ne mo¾e da se startuje. Proverite va¹u "
-"konfiguraciju i va¹e hardverske komponente. Onda probajte ponova da podesite "
-"udaljeni ¹tampaè."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Restartujem sistem za ¹tampanje ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "veliki"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidni"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za ¹tampanje u %s sigurnosnom nivou"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sada treba da instalirate sistem za ¹tampanje %s na sistemu koji se nalazi u "
-"%s sigurnosnom nivou.\n"
-"\n"
-"Ovaj sistem za ¹tampanje pokreæe demon (pozadinski proces) koji èeka na "
-"poslove ¹tampanja i upravlja njima. Ovaj demon je takoðe dostupan preko "
-"udaljenih ma¹ina preko mre¾e pa je time podlo¾an napadima. Zbog toga samo "
-"par izabranih demona se startuje po default-u na ovom sigurnosnom nivou.\n"
-"\n"
-"Da li stvarno ¾elite da podesite ¹tampanje na ovoj ma¹ini?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Pokreni sistem za ¹tampanje pri staranju sistema"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem za ¹tampanje (%s)neæe biti automatski pokrenut pri startanju ma¹ine.\n"
-"\n"
-"Moguæe je automatsko startanje iskljuèeno promenom na vi¹lji nivo "
-"sigurnosti, zbog toga ¹to je sistem za ¹tampanje primamljiv za napade.\n"
-"\n"
-"Da li ponovo ¾elite da automatski startujete sistem za ¹tampanje ?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Proveravam instalirani softver..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Uklanjam LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Uklanjam LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Izaberite Spooler za ¹tampaè"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem za ¹tampanje (spooler) ¾elite da koristite ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Pode¹avam ¹tampaè \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instaliram Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pripremam PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Pode¹avam ¹tampaè \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Da li biste da podesite ¹tampaè?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistem za ¹tampanje: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Sledeæi ¹tampaèi su pode¹eni. Dvokliknite na ¹tampaè da bi promenili njegove "
-"postavke; da bi ga postavili za default ¹tampaè; da bi videli informacije o "
-"njemu; ili da bi omoguæili ¹tampaè na udaljenom CUPS serveru dostupnim za "
-"Star/Open Office."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Sledeæi ¹taThe following printers are configured. Double-click on a printer "
-"to change its settings; to make it the default printer; or to view "
-"information about it."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Osve¾i listu ¹tampaèa (da bi prikazao sve dostupne udaljene CUPS ¹tampaèe)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Promenite sistem za ¹tampanje"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalni Mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Da li hoæete da podesite jo¹ jedan ¹tampaè?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Izmena konfiguracije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"©tampaè %s\n"
-"Da li hoæete da izmenite opcije za ovaj ¹tampaè?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Uradi to!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tip konekcije ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Ime, opis i lokacija ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvoðaè, model i drajver ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Proizoðaè i model ¹tampaèa"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Podesi ovaj ¹tampaè kao default"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Dodaj ovaj ¹tampaè u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Ukloni ovaj ¹tampaè iz Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "I¹tampaj test stranice"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Da li znate kako da koristite ovaj ¹tampaè"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Ukloni ¹tampaè"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Uklanjam stari ¹tampaè \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Default ¹tampaè"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "©tampaè  \"%s\" je sada postavljen kao default ¹tampaè."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Dodajem ¹tampaè u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "©tampaè \"%s\" je uspe¹no dodan u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Neuspelo dodavanje ¹tampaèa \"%s\" u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Uklanjanje ¹tampaèa iz Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "©tampaè \"%s\" je uspe¹no uklonjen iz Star Office/OpenOffice.org-a"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Neospeo poku¹aj uklanjanja ¹tampaèa \"%s\" iz Star Office/OpenOffice.org-a"
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li hoæete da uklonite ¹tampaè \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Uklanjam ¹tampaè \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Pode¹avanje proksija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobrodo¹li u alat za konfiguraciju proxy-ja.\n"
-"\n"
-"Ovde mo¾ete da podesite va¹e http i ftp proksije\n"
-"sa ili bez korisnièkog imena i lozinke\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molim Vas da unesete http proxy informacije\n"
-"Ostavite polja praznima ukoliko ne ¾elite da koristetite proksi"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba da poèinje sa http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Broj porta bi trebao da bude numerièka oznaka (broj)"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molim Vas da unesete informacije o ftp proxy-ju\n"
-"Polja ostavite praznima ukoliko ne ¾elite da koristite ftp proksi"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba da poèinje sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Unesite proxy korisnièko ime i lozinku, ukoliko postoje.\n"
-"Polja ostavite paznima ukoliko ne ¾elite da koristite korisnièko ime/lozinku"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "logovanje"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lozinka"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "pomovo unesite lozinke"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Nepodudarnost lozinki. Probajte ponovo!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nije moguæe dodati particiju na _formatiran_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nije moguæ unos u fajl %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neuspelo"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neuspelo (mo¾da nedostaje raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startam ALSA (Advanced Linux Sound Architecture) sistem za zvuk"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron -  podesite period.komande"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se koristi za praæenje statusa baterije i logovanje preko syslog.\n"
-"Koristi se i za ga¹enje ma¹ine (radi i na desktop ma¹inama) kada je baterija "
-"slaba"
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreæe komande zakazane at komandom,kao i  batch  komande kao je "
-"optereæenost\n"
-"sistema mala."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardni UNIX program koji pokreæe korisnièke programe\n"
-"preriodièno u zakazano vreme. vixie cron  dodaje opcije prostom UNIX cron,"
-"ukljuèujuæi bolju  sigurnost i bolju podesivost."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM daje podr¹ku za mi¹a za teksulano-bazirane aplikacije kao ¹to je\n"
-"Midnight Commander.Isto tako daje podr¹ku za  pop-up menije na  konzoli."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake starta ispitivanje haredvera, i po potrebi ðe podesiti \n"
-"novi/izmenjeni hardver."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je  WWW server. On se koristi da opslu¾uje  HTML fajlove\n"
-"i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interent super server demon (znan kao netd) starta \n"
-"razne internet servise.On je odgovoran za pokretanje mnogix servisa kao npr. "
-"elnet, ftp, rsh, i  rlogin.Iskljuèujuæi njega, iskljuèujete i servise \n"
-"za koje je on odgovoran."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokrenite filtriranje paketa za Linux kernel serije 2.2, da bi podesili\n"
-"firewall radi za¹tite va¹e ma¹ine od mre¾nih napada."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket aktivira odabranu mapu tastature kako je pode¹eno \n"
-"u  /etc/sysconfig/keyboard.Ovo se pode¹ava koristeæi kbdconfig alatku.\n"
-"Treba da bude ukljuèen na veæinu ma¹ina."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatska regeneracija kernelovog zaglavlja u /boot zar\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatska detekcija i konfiguracija hardvera pri startanju sistema."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ðe ponekad izvoditi razne zadatke tokom\n"
-"startanja sistema radi odr¾avanja i pode¹avanja sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je print demon potreban  da bi lpr radio dobro.To je \n"
-"u osnovi server koji arbitrira  print poslove ¹tampaèu(ima)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-ov Virtuelni Server, koristi se za izgradnju brzog i dostupnog\n"
-"servera."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Nazvan kao (BIND) je Domain Name Server (DNS) koji se koristi za daje host "
-"ime IP adresi."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montiranje i demontiranje svih Mre¾nih fajl sistema(NFS), SMB (Lan\n"
-"Manager/Windows), i  NCP (NetWare) taèaka montiranja. "
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiviranje i deaktiviranje svih mre¾nih interfejsa konfigurisanih za "
-"start \n"
-"pri podizanju sistema."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre¾a.\n"
-"Ovaj servis omoguæava funkcionalnost NFS servera,koji se konfiguri¹e preko \n"
-"/etc/exports datoteke."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularni protokol za razmenu  fajlova preko TCP/IP mre¾a.\n"
-"Ovaj servis omoguæava funkcionalnost NFS  file locking funkcije"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski ukljuèuje numlock taster pod konzolom\n"
-"i u XFree pri startanju."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podr¹ka za OKI 4w i kompatibilne mu  win ¹tampaèe."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podr¹ka  se obièno koristi za  eternet i modeme u laptopovima.\n"
-"Neæe se pokrenuti ukoliko nije konfigurisan tako daje bezbedno instaliran \n"
-"na sistemu kom nije potreban."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmaper uravlja  RPC konekcijama,koje koriste\n"
-"protokoli kao NFS i  NIS.Portmap server mora biti pokrenut na ma¹inama\n"
-"koje rade kao serveri za protokole koji koriste RPC mehanizam."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je  Mail Transport Agent,koji u stvaripreme¹ta po¹tu sa jedne ma¹ine "
-"na drugu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"èuva i obnavlja sistemski  entropy pool za veæi kvalitet generisanje\n"
-"sluèajnih brojeva."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodeljuje raw ureæaje za blok ureæaje (kao ¹to su hard disk\n"
-"particije), ¹to moðe biti korisno za aplikacije kao ¹to je Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon dozvoljava automatsko IP ruter update-ovanje preko\n"
-"RIP protokola.Dok se RIP dosta korisiti na malim mre¾ama,kompleksniji \n"
-" routing protokoli su potrebni za kompleksne mre¾e."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokol dozvoljava korisnicima na mre¾i da omoguæe\n"
-"merenje performansi za bilo koju ma¹inu na toj  mre¾i."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokol omoguæava korisnicima na mre¾i da otkriju ko je\n"
-"ulogovan na drugim ma¹inama."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokol dozvoljava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika ulogovanih na sistem sa pokrenutim rwho demonom (slièno finger-u)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Pokreæe sistem za zvuk na va¹oj ma¹ini"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je objekat pomoæu kog mnogi demoni koriste za logovanje poruka\n"
-"u raznim sistemskim log fajlovima. Dobra je ideja imati uvek pokrenut syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Podi¾e drajvere za va¹e usb ureðaje."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreæe X Font server (potrebno za pokretanje XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koje servisi treba automatski da se pokrenu pri startanju"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "©tampanje"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Zajednièko deljenje fajlova"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server Baze podataka"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviranih za %d registrovanih"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servisi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "pokrenuto"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljeno"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"¾alim ali nema dodatnih informacija\n"
-"o ovom servisu."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri startanju"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol za statak sveta"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internet pristup"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Razvojna"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Mre¾ni interfejs"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB server  host:"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ekspert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-#, fuzzy
-msgid "MandrakeConsulting"
-msgstr "Mandrake Alati za obja¹njenja"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu proèitati tabelu particija, mnogo je iskvarena za mene :(\n"
-"Poku¹aæu dalje zaobilazeæi lo¹e particije"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Gre¹ka!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu da pronaðem potrebni image fajl `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Autoinstalacioni konfigurator"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sada treba da podesite Autoinstalacionu Disketu. Ova opcije je donekle "
-"iopasna i mora se pa¾ljivo koristiti.\n"
-"\n"
-"Sa ovom opcijom, moæi æete da ponovite instalaciju koju steizveli na ovom "
-"raèunaru, sa povremenim upitima u cilju izmene odreðenih vrednosti "
-"parametra.\n"
-"\n"
-"RAdi maksimalne sigurnosti, particioniranje i formatiranje nikada neæe biti "
-"izvoðeno automatskiy, bez obzira ¹ta izabrali tokom instalacije na ovom "
-"raèunaru.\n"
-"\n"
-"Da li ¾elite da nastavite?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Pode¹avanje automatizovanih koraka"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"izaberite za svaki korak da li æe biti istovetan i automatizovan iliæe biti "
-"ruèno pode¹avan"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Doborodo¹li.\n"
-"\n"
-"Parametri za autoinstalaciju su dostupni u delu koji se nalazi levo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Èestitamo !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa je uspe¹no kreirana.\n"
-"Sada mo¾ete ponoviti va¹u instalaciju."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Autoinstalacija"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Dodaj vrednost"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Ukloni zadnju vrednost"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Izve¹taj \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon Izve¹taj\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Detalji Izve¹taja\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "ukupan napredak"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup sistemskih fajlova..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "backup-ovanje fajlova sa hard diska..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "backup-ovanje korsinikovih fajlova"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Napredak Backup-ovanja hard diska..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "backup-ovanje ostalih fajlova..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"lista fajlova poslana preko FTP-a : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problemi sa FTP konekcijom: Nije moguæe poslati va¹e backup fajlove "
-"preko FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Gre¹ka tokom slanja mail-a. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Odabir fajlova"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Odaberite fajlove ili direktorijume i klinite na 'Dodaj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Proverite sve opcije koje vam trebaju.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu saèuvati i kasnije obnoviti sve fajlove u va¹em /etc "
-"direktorijumu.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Saèuvajte svoje Sistemske fajlove ( /etc direktorijum )"
-
-#: ../../standalone/drakbackup_.c:793
-#, fuzzy
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-"Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ne ukljuèuj kritiène fajlove (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Sa ovom opcijom moæi æete da obnovite bilo koju verziju\n"
-" va¹eg /etc direktorijuma."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Selektujte sve korisnike koje ¾elite da ukljuèite u backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ne ukljuèuj ke¹ pretra¾ivaèa"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-"Koristi Inkrementalni Backup-ove  (ne zamenjuj ih sa starim backup-ovima)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Ukloni Selektovano"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Korisnici"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Korisiti Use FTP connection to backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Molim Vas unesete ime hosta ili IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Unesite direktorijum da bi\n"
-" stavili backup na ovaj host."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Unesite va¹e korisnièko ime"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Unesite va¹u lozinku"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Zapamti ovu lozinku"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP konekcija"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sigurnosna Konekcija"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Koristi CD/DVDROM za backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Izaberite va¹ CD prostor"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Proverite da li koristite CDRW medij"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Proverite da li ¾elite izbri¹ete va¹ CDRW pre"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Proverite da li ¾elite da ukljuèite\n"
-" install boot na va¹ CD."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Unesite ime va¹eg CD Writer ureðaja\n"
-" ex: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Koristi traku za backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Unesite ime ureðaja koji koristite za backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Unesite maksimalnu velièinu\n"
-" dozvoljenu za Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Unesite direktorijum da bi saèuvali:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Koristi quota zar backup fajlove"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Mre¾a"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "na sat"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dnevno"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "nedeljno"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "meseèno"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Koristi demon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Izaberite vremenski interval \n"
-"izmeðu svakog backup-a"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Izaberite\n"
-"medij za backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Koristi hard disk sa demonom"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Koristi FTP sa demonom"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Proverite da li je cron demon ukljuèen u va¹e servise."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Po¹alji mail izve¹taj nakon svakog backup/a na :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "©ta"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Gde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kada"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Vi¹e Opcija"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup Konfiguracija"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Izaberite ¹ta ¾elite da backup-ujete"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na Hard Disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "preko Mre¾e"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Izaberite ¹ta ¾elite da backup-ujete"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Backup-uj sistem"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Backup-uj Korisnike"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Izaberite korisnike ruèno"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Backup Izvori: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Sistemski fajlovi:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Korisnièki fajlovi:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ostali fajlovi:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Snimi na Hard Disk na putanju : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Snimi na FTP ili host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisnièko ime: %s\n"
-"\t\t na putanji: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opcije:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNe ukljuèuj Sistemske Fajlove\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackup koristi tar i bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackus koristi tar i gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Demonn (%s) ukljuèuje :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Mre¾a preko FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Mre¾a preko SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Bez konfiguracije, kliknite na Èarobnjak ili Napredno\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista podataka za obnavljanje:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista korumpiranih podataka:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Deselektujte ili uklonite ih sledeæi put."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Backup fajlovi su korumpirani"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Svi va¹i selektovani podasi su          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Uspe¹no Obnovljeni na %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "        Obnavljanje Konfiguracije         "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "U Redu za obnavanje drugih fajlova."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Obnavljanje liste korisnika (samo najnoviji podaci po korisniku su va¾ni)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Backup sistemskih fajlova pre:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "izaberite datum za obnavljanje"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Koristi Hard Disk za backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Povrati (restore) sa Hard Diska"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Unesite direktorijum gde je sme¹ten backup"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Izaberitedrugi medij za obnavljanje sa"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Drugi Medij"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Obnovi sistem"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Obnovi korisnike"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Obnovi ostalo"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "izaberite putanju za obnavljanje (umesto /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Uradi novi backup pre obnavljanja (samo za inkrementalne backup-e.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Ukloni korisnièke direktorijume pre obnavljanja"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Obnovi sve backup-ove"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Obnavljanje po ¾elji"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pomoæ"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Prethodni"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Saèuvaj"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Kreiraj backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Obnovi"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Sledeæi"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Kreirajte backup pre obnavljanja...\n"
-" ili potvrdite da je va¹a putanja ispravna."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Gre¹ka pri slanju mail-a\n"
-"  va¹ izve¹taj nije poslan\n"
-"  Podesite sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista paketi za instalaciju"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Gre¹ka tokom slanja fajla preko FTP-a.\n"
-" Ispravite va¹u FTP konfiguraciju."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Izaberite podatke za obnavljanje..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Izaberite medij koji ¾elite da korisitite za backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Izaberite podatke koji ¾elite da backup-ujete..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nije pronaðen kofiguracioni fajl \n"
-"Kliknite na Èarobnjak ili Napredno."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "U razvoju ... molim Vas saèekajte"
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup-uj sistemske fajlove"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup-uj korisnièke fajlove"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup-uj ostale fajlove"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Ukupni napredak"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "fajlovi poslani preko FTP-a"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "©aljem fajlove..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista podataka koje ukljuèujem na CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Unesite brzinu cd pisaèa"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Unesite ime va¹eg CD Pisaèa (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Proverite da li ¾elite da ukljuèite install boot na va¹ CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Backup-uj sada iz konfiguracionog fajla"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Pogledaj Backup Konfiguraciju."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Èarobnjak Konfiguracija"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Napredna Konfiguracija"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Backup Sad"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"Opis opcija:\n"
-"\n"
-" U ovom koraku Drakbackup vam omoguæava da promenite:\n"
-"\n"
-" - Mod kompresije:\n"
-"    \n"
-"      Ukoliko izaberete bzip2 kompresiju, bolje æete\n"
-"      kompresovati podatke od gzip-a (oko 2-10 %).\n"
-"      Ova opcija nije selektovana po default-u zbog\n"
-"      toga ¹to ova kompresija zahteva vi¹e vremena ( oko 1000% vi¹e).\n"
-" \n"
-" - Mod a¾uriranja:\n"
-"\n"
-"      Ova opcija æe a¾urirati va¹ backup, ali ova\n"
-"      opcija nije naroèito praktièna zato ¹to morate da\n"
-"      raspakujete va¹ backup pre nego ga mo¾ete a¾urirati.\n"
-"      \n"
-" - the .backupignore mod:\n"
-"\n"
-"      Kao sa cvs-om, Drakbackup æe ignorisati sve ukljuèene\n"
-"      reference .backupignore fajlova u svakom direktorijumu.\n"
-"      primer: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Neke gre¹ke tokom sendmail-a su uzrokovane \n"
-" lo¹om konfiguracijom postfix-a. Da bi ih re¹ili morate da\n"
-" podesite myhostname ili mydomain u /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"Opis opcija:\n"
-"\n"
-" - Backup sistemskih fajlova:\n"
-"       \n"
-"\tOva opcija dozvoljava da backup-ujete va¹ /etc direktorijum,\n"
-"\tkoji sadr¾i sve konfiguracione fajlove. Molim Vas da budete\n"
-"\tpa¾ljivi tokom obnavljanja da ne bi prepisali sledeæe fajlove:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup Korisnièkih fajlova: \n"
-"\n"
-"\tOva opcija vam omoguæava da selektujete sve korisnike koje ¾elite \n"
-"\tda backup-ujete.\n"
-"\tDa bi saèuvali prostor na disku, preporuèujemo da \n"
-"\tukljuèujete fajlove iz ke¹a internet pretra¾ivaèa.\n"
-"\n"
-" - Backup Ostalih fajlova: \n"
-"\n"
-"\tOva opcija vam omoguæava da dodate jo¹ podataka za Backup.\n"
-"\tSa ovom opcijom trenutno nije moguæe \n"
-"\tizabrati inkrementalni backup.\t\t\n"
-" \n"
-" - Inkrementalni Backup-ovi:\n"
-"\n"
-"\tInkrementalni backup je najmoænija \n"
-"\topcija za backup. Ova opcija vam omoguæava \n"
-"\tda svev va¹e podatke prvi put, a \n"
-"\tkasnije samo one izmenjene.\n"
-"\tTada æete moæi, tokom obnavljanja\n"
-"\tda obnovite va¹e podatke po odreðenom\n"
-"\tdatumu.\n"
-"\tUkoliko niste izabrali ovu opciju svi\n"
-"\tstari backup-ovi su izbrisani pre svakog backup-a.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Opis obnavljanja:\n"
-" \n"
-"Samo najnoviji podaci æe biti kori¹æeni, zato ¹to inkrementalni \n"
-"backup-u neophodno da obnavlja stare backup-ove jedan po jedan.\n"
-"\n"
-"Ukoliko ne ¾elite da obnavljate odreðenog korisnika deselektujte sve\n"
-"njegove selekcije.\n"
-"\n"
-"U drugom sluèaju, moæi æete da izaberete samo jedan od ovih\n"
-"\n"
-" - Inkrementalni Backup-ovi:\n"
-"\n"
-"\tInkrementalni backup je najmoænija opcija \n"
-"\tu backup-u, jer vam omoguæava da \n"
-"\tto backup-ujete sve podatke prvi put, a \n"
-"\tkasnije samo one koji su izmenjeni.\n"
-"\tTako æete  moæi tokom obnavljanja\n"
-"\tda obnovite va¹e podatke sa odreðenim\n"
-"\tdatumom.\n"
-"\tUkoliko niste izabrali ovu opciju svi\n"
-"\tstari backup-ovi æe biti izbrisani pre svakog backup-a.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Ovaj program je bespaltan; mo¾ete ga redistribuirati i/ili menjati\n"
-" pod uslovima GNU General Public License kako je objavljeno\n"
-" u Free Software Fondaciji; ili verziji 2, ili (u va¹em sluèaju)\n"
-" bilo kojoj novijoj verziji.\n"
-"\n"
-" Ovaj program je distribuiran u nadi da æe biti od koristi,\n"
-" sli BEZ IKAKVIH GARANCIJA; èak i bez garancije za\n"
-" KORISNOST i PRAKTIÈNU UPOTREBU.  Pogledajte\n"
-" GNU General Public Licencu za vi¹e detalja.\n"
-"\n"
-" Trebali bi da mate kopiju GNU General Public Licence\n"
-" zajedno sa ovim programom; ukoliko je nemate, pi¹ite nam na adresu Free "
-"Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Opis:\n"
-"\n"
-"  Drakbackup se koristi za backup va¹eg sistema.\n"
-"  Tokom konfiguracije mo¾ete izabrati: \n"
-"\t- Sistemske fajlove, \n"
-"\t- Korisnièke fajlove, \n"
-"\t- Ostale fajlove.\n"
-"\tili  Sve va¹ sistem ...  i Drugo (kao ¹to su Windows Particije)\n"
-"\n"
-"  Drakbackup vam dozovoljava backup yva¹eg sistema na:\n"
-"\t- Hard disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (bez autostarta, rescue i autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup dozvoljava va oblovite svoj sistem u\n"
-"  izabrani korisnièki direktorijum.\n"
-"\n"
-"  Po default-u svi backup-ovi æe biti sme¹teni u va¹\n"
-"  /var/lib/drakbackup direktorijum\n"
-"\n"
-"  Konfiguracioni fajl:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Korak za obnavljanje:\n"
-"  \n"
-"  Tokom procesa obnavljanja, DrakBackup æe ukloniti \n"
-"  va¹ orginalni direktorijum i proveriti da li su svi \n"
-"  backup fajlovi ispravni. Preporuèuje se \n"
-"  da uradite poslednji backup pre obnavljanja.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"Opis ocija:\n"
-"\n"
-"Budite pa¾ljivi kada koristite ftp backup, zato ¹to samo \n"
-"backup-ovi koji su veæ kreirani su poslati na server.\n"
-"Tako da u ovom trenutku, morate da kreirate backup na hard disku \n"
-"pre nego ga po¹aljete na server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemi pri obnavljanju:\n"
-"\n"
-"Tokom procesa obnavljanja, Drakbackup æe proveriti sve va¹e \n"
-"backup fajlovi pre nego ih obnovi.\n"
-"Pre obnavljanja, Drakbackup æe ukloniti \n"
-"va¹ orginalni direktorijum, i izgubiæete sve \n"
-"podatke. Va¾no je da budete pa¾ljivi i da nemenjate \n"
-"backup fajlove ruèno.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Opis:\n"
-"\n"
-"  Drakbackup se koristi za backup va¹eg sistema.\n"
-"  Tokom konfiguracije mo¾ete izabrati \n"
-"\t- Sistesmke fajlove, \n"
-"\t- Korisnièke fajlove, \n"
-"\t- Ostale fajlove.\n"
-"\tor Ceo va¹ sistem ...  i Drugo (npr. Windows Particija)\n"
-"\n"
-"  Drakbackup vam dozvoljava da backup-ujete va¹ sistem na:\n"
-"\t- Hard disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (sa autoboot, rescue i autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup vam dozvoljava da obnovite va¹ sistem u \n"
-"  odabranom korisnièkom direktorijumu.\n"
-"\n"
-"  Po default-u svi backup-ovi æe biti sme¹teni u va¹\n"
-"  /var/lib/drakbackup direktorijum\n"
-"\n"
-"  Konfiguracioni fajl:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Postupak obnavljanja:\n"
-"  \n"
-"  Tokom procesa obnavljanja, Drakbackup æe ukloniti\n"
-"  va¹ orginalni direktorijum i proveriti da li su svi\n"
-"  backup fajlovi ispravni. Preporuèuje se\n"
-"  da uradite poslednji backup pre obnavljanja.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %s-a neuspela. Gre¹ka je:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Tra¾i instalirane fontove"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Deselektovani fontovi instalirani"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "parsiraj sve fontove"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "fontovi nisu pronaðeni"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "uraðeno"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ne mogu da pronaðem nijedan font na montiranoj particiji"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ponovo selektuj ispravne fontove"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ne mogu da pronaðen nijedan font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Tra¾i fontove u liti instaliranih"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopija fonta"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalacija True Type fontova"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "saèekajte, u toku je ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Instalacija True Type fontova zavr¹ena"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverzija fontova"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "kreiram type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referenciranje"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Konverzija ttf fontova"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Konverzija pfm fontova"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Sa¾mi temp fajlove"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Restartuj XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Za¾mi Font fajlove"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "Restart xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Pe instalacije ijednog fonta, proverite da li imate pravo da ih instalirate "
-"i koristite na va¹em sistemu.\n"
-"\n"
-"-Mo¾ete instalirati fontove na upoobièajeni naèin. U reðim sluèajevimas, "
-"bagoviti fontovi mogu sru¹iti va¹ X Server."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Uvoz fontova"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Dobavi Windows fontove"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Deinstaliraj fontove"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Napredne opcije"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista fontova"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izaberite aplikacije koje æe podr¾avati fontove :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generic ©tampaèi"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Izaberite font ili direktorijum i kliknite na  'Dodaj'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instaliraj listu"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "kliknite ovde ukoliko ste sigurni."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "a ovde ukoliko niste."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Deselektuj Sve"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Selektuj Sve"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Ukloni Listu"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Testovi inicijala"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiraj fontove u sistem"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instliraj i konvertuj fontove"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-instalacija"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Ukloni fontove iz sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-deinstalacija"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Deljenje internet konekcije"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deljenje internet konekcije je trenutno omoguæeno "
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Pode¹avanje deljenja internet konekcije je veæ zavr¹eno.\n"
-"Trenutno je omoguæeno.\n"
-"\n"
-"¹ta ¾elite da uradite?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "onemoguæi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ukloni"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ponovo podesi"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Uklanjam servise..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Deljenje internet konekcije je onemoguæeno."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deljenje internet konekcije je trenutno onemoguæeno"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Pode¹avanje deljenja internet konekcije je veæ zavr¹eno.\n"
-"Trenutno je onemoguæeno.\n"
-"\n"
-"¹ta ¾elite da uradite?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "omoguæi"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ">Omoguæavam servisi..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Deljenje internet konekcije je omoguæeno."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Va¹ kompjuter mo¾ete podesiti za deljenje njegove Internet konekcije.\n"
-"sa ovom opcijom, drugi kompjuteri na va¹oj lokalnoj mre¾i æe moæi da "
-"koristeInternet konekciju sa ovog kompjutera.\n"
-"\n"
-"Napomena: potrebana vam je mre¾na kartica da bi podesili lokalnu mre¾u"
-"(LAN).\n"
-"\n"
-"Da li ¾elite da podesite deljenje Internet konekcije ?"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koristeæi modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nema mre¾nog adaptera u va¹em sistemu !"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nije detektovana nijedna mre¾na kartica. Pokrenite alat za konfigurisanje "
-"hardvera."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Mre¾ni interfejs"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Postoji samo jedan konfigurisan mre¾ni adapter na va¹em sistemu:\n"
-"\n"
-"%s\n"
-"\n"
-"Sada podeavam va¹u lokalnu mre¾u sa ovim adapterom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Izaberite koji æe mre¾ni adapter biti kori¹ten za LANmre¾u."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Mre¾ni interfejs je veæ pode¹¹en"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Upozorenje, mre¾ni adapter (%s) ije veæ pode¹en.\n"
-"\n"
-"Da li ¾elite da ga automatski prekonfiguri¹ete?\n"
-"\n"
-"Mo¾ete to uèiniti ruèno ali morate da znate ¹ta radite."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatska rekonfiguracija"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Prika¾i trenutnu konfiguraciju"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Trenutna konfiguracija za `%s':\n"
-"\n"
-"Mre¾a: %s\n"
-"IP adresa %s\n"
-"IP atributi: %s\n"
-"Drajver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Mogu da zadr¾im va¹u trenutnu konfiguraciju i pretpostaviti da je veæ "
-"pode¹en DHCP server; u tom sluèaju proverite da li je dobro oèitana C-Class "
-"Network koji koristite za va¹u lokalnu mre¾u; Ja je neæu rekonfigurisati i "
-"neæu dirati u va¹u DHCP server konfiguraciju.\n"
-"\n"
-"Inaèe, ja mogu da rekonfiguri¹em va¹ interfejs i (re)konfiguri¹em DHCP "
-"server za vas.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-Class Lokalna Mre¾a"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Ovaj) DHCP server IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Rekonfiguri¹i interfejs i DHCP server"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalna Mre¾a nije zavr¹ila sa`.0', bailing out."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potencijalni konflikt LAN adrese u trenutnom konfig. %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Detektovana Firewalling konfiguracija"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje ! Postojeæa firewalling konfiguracija je detektovana. Mo¾daæe "
-"biti potrebno ruèno pode¹avanje nakon instalacije."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfiguracija u toku..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurisanje skripti,instalacija softvera, startanje servisa..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi pri instalaciji %s paketa"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je pode¹eno.\n"
-"Sada mo¾ete deliti Internet konekciju sa drugim kompjuterima na va¹oj "
-"lokalnoj mre¾i  (LAN), koristeæi automatsku mre¾nu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Pode¹avanje deljenja internet konekcije je veæ zavr¹eno ali je trenutno "
-"onemoguæeno."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Pode¹avanje deljenja internet konekcije je veæ zavr¹eno i trenutno je "
-"omoguæeno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Do sada Deljenje internet konekcije nije pode¹avano."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguracija Deljenja Internet konekcije"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobrodo¹li u alat za pode¹avanje Deljenja Internet konekcije\n"
-"%s\n"
-"\n"
-"Kliknite na Podesi (Configure) da bi pokrenuli pode¹avanje."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Pode¹avanje mre¾e (%d adaptera)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Ukloni profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil za brisanje:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Ime profila koji se kreira (novi profil je kreiran kao kopija trenutnog) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ime hosta:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet pristup"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Molim Vas saèekajte"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Podesi Internet pristup..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN konfiguracija"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drajver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Stanje"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Podesi lokalni mre¾u..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknite ovde za pokretanje èarobnjaka ->"
-
-#: ../../standalone/draknet_.c:257
-#, fuzzy
-msgid "Wizard..."
-msgstr "èarobnjak (pomoænik)"
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Promeni"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Samo momenat... primena konfiguracije"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektovan"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nije konektovan"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektovanje..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Diskonektovan..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, detektovana je jo¹ jedna Internet konekcija, mo¾da koristi va¹u "
-"mre¾u"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vi nemate ni jedan interfejs koji je pode¹en.\n"
-"Morate ih prvo podesite klikom na 'Configure'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfiguracija"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Startni(Boot) protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Pokrenuto pri startanju"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "Aktiviraj sad"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiviraj sad"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Ovaj interfejs jo¹ uvek nije pode¹en.\n"
-"Pokrenite konfiguracionog èarobnjaka u glavnom prozoru"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vi nemate ni jednu pode¹enu Internet konekciju.\n"
-"Kreirajte je klikom na 'Configure'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguracija Internet konekcija"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguracija Internet Konekcija"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip konekcije: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Mre¾na kartica"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Pode¹avanje sigurnosnog nivoa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koje ¾elite da koristite"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kabl)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "SAD (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "SAD (kabl)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "SAD (kabl-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kabl)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Istoèna Evropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irska"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Zapadna Evropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australija"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Novi Zeland"
-
-#: ../../standalone/drakxtv_.c:52
-#, fuzzy
-msgid "South Africa"
-msgstr "Ju¾na Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Molim Vas da\n"
-"ukucate va¹ tv sistem i zemlju"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV sistem :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Podruèje :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Skeniranje TV kanala u toku ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Skeniranje za TV kanale"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "upotreba: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Koji  raspored tastature ¾elite ?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Da li ¾elite da BackSpace da vrati Delete u konzolu?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Promeni Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ubacite va¹ Instalacioni CD u pogon i pritisnite OK kada ste spremni.\n"
-"Ukoliko ga nemate pritisnite Poni¹ti da bi izbegli live upgrade."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu da startujem live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Prika¾i samo za izabrani dan"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/_Datoteka/_Nova"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datoteka/_Otvori"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datoteka/_Saèuvaj"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datoteka/Saèuvaj_Kao"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datoteka/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcije"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcije/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pomoæ"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoæ/_O..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Korisnik"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Poruke"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Dzyslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake Alati za obja¹njenja"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "tra¾i"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Alat za pregledanje log datoteka"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Opcije"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "poklapanje"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "ali ne poklapa se"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Izaberi datoteku"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendar"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Sadr¾aj datotekse"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Mail/SMS alarm"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "molim Vas saèekajte, parsiram datoteku: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "KOnfiguracija alarma za Mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Dobrodo¹li u alat za konfiguraciju mail/SMS\n"
-"\n"
-"Ovde mo¾ete da podesite alarmni sistem.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "pode¹avanje servisa"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Oglasiæe se alarm ukoliko jedan od izabranih servisa nebude vi¹e aktivan"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "uèitaj postavku"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Oglasiæe se alarm ukoliko je uèitano veæe od ove vrednosti"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "konfiguracija alarma"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Podesite naèin na koji æe vas sistem alarmirati"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Snimi Kao..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Izaberite tip mi¹a"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nije pronaðen serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Da imitiram rad 3 tastera?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s pronaðen na %s, da li da ga podesim ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Izaberite skener"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ovaj %s skener nije podr¾an"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Startni (boot) ureðaj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewalling konfiguracija"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewalling konfiguracija"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Vi ste veæ podesili firewall.\n"
-"Kliknite na Podesi(Configure) da bi izmenili ili uklonili firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"Kliknite na Podesi(Configure) da bi podesili standardni firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Izaberite jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Izaberite inst.klasu"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekcija hard diska"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Pode¹avanje mi¹a"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Izaberi tastaturu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podesi datoteène sisteme"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiraj particije"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paketi za instalaciju"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instaliraj sistem"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodaj korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podesi mre¾u"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Podesi servise"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instaliraj starter"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Napravi startni disk"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurisanje X-a"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instaliraj sistemske update-ove"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Izlaz iz instalacije"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Mali firewall konfigurator\n"
-"\n"
-"On konfiguri¹e lièni firewall za ovu Mandrake Linux ma¹inu.\n"
-"Za moæno firewall re¹enje, pogledajte\n"
-"specijalizovanu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada æemo vam postaviti pitanja o tome koje servise bi hteli da dozvolite\n"
-"da se pove¾u na Internet.  Razmislite pa¾ljivo o ovome\n"
-"pitanju, jer je bezbednost va¹eg kompjutera va¾na.\n"
-"\n"
-"Ukoliko trenutno ne koristite jedan od ovih servisa, uklonite firewall\n"
-"sa njih.  Mo¾ete promeniti ove opcije bilo kada ponovnim pokretanjem\n"
-"ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li pokreæete web server na ovoj ma¹ini koji treba da bude viðen\n"
-"na celom Internetu? Ukoliko pokreæete webserver koji treba da bude viðen\n"
-"samo sa ove ma¹ine, ovde mo¾ete da bezbedno odgovorite NE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li pokreæete name server na ovoj ma¹ini? Ukoliko niste podesili jo¹ "
-"jedan\n"
-"za away IP i zonske informacije za celi Internet, molim\n"
-"vas da odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li ¾elite da dozvolite Secure Shell (ssh) konekcije? Ovo\n"
-"je zamena za telnet koju mo¾ete koristiti za prijavu. Ukoliko koristite\n"
-"telnet, trebali bi da se prebacite na ssh. Telenet nije\n"
-"enkriptovan -- tako da neki napadaèi mogu ukrasti lozinku ukoliko je\n"
-"koristite. ssh je enkriptovan i ne dozovoljava ovakve stvari."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li ¾elite da dozvolite telnet konekcije?\n"
-"Ovo je u¾asno nesiguno, kako smo i objasnili na prethosnom ekranu. Mi\n"
-"vam preporuèujemo da ovde odgovorite NE i da koristite ssh umesto\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li pokreæete FTP server koji vam je potreban\n"
-"za Internet? Ukoliko to radite, preporuèujemo ga koristite samo za\n"
-"Anonymous transfere. Bilo koja lozinka poslata preko FTP mo¾e biti\n"
-"meta napadaèa, po¹to  FTP takoðe koristi nekritovane lozinke.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li pokreæete mail server? Ukoliko ¹aljete poruke preko\n"
-"pine, mutt ili nekog drugog tekstualnog mail klijenta,\n"
-"onda to verovatno koristite.  Inaèe, trebali bi da uklonite firewall za "
-"ovo.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li pokreæete POP ili IMAP server? Ovo bi koristili \n"
-"za host-ovanje non-web-baziranih  mail raèuna za ljude preko\n"
-"ove ma¹ine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Izgleda da koristite 2.2 kernel.  Ukoliko je va¹ mre¾ni IP\n"
-"automatski pode¹en za kompjuter u va¹oj kuæi ili na poslu \n"
-"(dodeljeno dinamièki), treba da ga omoguæimo za ovo.  Da\n"
-"li je ovo u pitanju?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li va¹ kompjuter dobija vreme sinhronizovano sa drugim kompjuterom?\n"
-"Uglavnom se ovo koristi na srednjim-velikim Unix/Linux organizacijama\n"
-"radi sinhronizacije vremena prijave ili za sliène stvari.  Ukoliko niste "
-"deo\n"
-"velike firme ili niste èuli za ovo, onda zaobiðite \n"
-"ovo."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfiguracija zavr¹ena. Da li da zapi¹emo ove izmene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu da otvorim  %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu da otvorim %s radi upisa: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Firewalling konfiguracija"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Samo momenat, pripremam instalaciju"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mre¾ni kompjuter, (klijent)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za Palm Pilot ili Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Ime Domena i Mre¾ni Informacioni Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office programi: tekst procesori (kword, abiword), tabele (kspread, "
-"gnumeric), pdf preglednici, itd"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio alati: mp3 ili midi plejeri,mikseri, itd"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Kako? (Howto's) za Linux i Besplatni Softver"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE padna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Set alata za el.po¹tu, vesti, web, transfer datoteka, ili chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server,Baze podataka"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL server za bazu podataka"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lako konfigurisanje kompjutera"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Alati"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolni alati"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijalna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguracija"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Jo¹ grafièkih okru¾enja (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop okru¾enje, osnovno grafièko okru¾enje sa kolekcijom prateæih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafièko Okru¾enje"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za kreiranje i pr¾enje CDa"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Radna(Office) stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafièki programi kao ¹to je Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi  i propratne datoteke"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Mre¾ni Server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, El.po¹ta/Groupware/Vesti"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Stanica za igru"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video plejeri i editori"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkade, ige na tabli, strategije, itd"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Skup alata za èitanje i slanje el.po¹te i vesti (pine, mutt, tin..) i za "
-"pretra¾ivanje Interneta"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, monitoring"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Liène finansije"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafièka okru¾enja za setom korisnièkNFS server, SMB server, Proxy serverNFS "
-"server, SMB server, Proxy serverih aplikacija i desktopalata"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razlièite protokole ukljuèujuæi i ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programi za pu¹tanje zvuka i videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Drugi grafièki desktopovi"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "editori,¹elovi, alati za datoteke, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za upravljanje va¹im finansijama, kao ¹to je gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Upravljanje privatnim informacijama"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD pr¾enje"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Nauèna radna stanica"
-
-#~ msgid "About"
-#~ msgstr "O..."
-
-#~ msgid "             Help           "
-#~ msgstr "             Pomoæ           "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Mo¾ete navesti njegove opcije za modul %s."
-
-#~ msgid "Low"
-#~ msgstr "Mala"
-
-#~ msgid "Medium"
-#~ msgstr "Srednja"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Od nekoliko pobolj¹anja na ovom sigurnosom nivou, najznaèajniji\n"
-#~ "je poveæan broj sigurnosnih upozorenja i provera."
-
-#~ msgid "Boot mode"
-#~ msgstr "Startni mod"
-
-#~ msgid "Export"
-#~ msgstr "Eksport"
-
-#~ msgid "click here"
-#~ msgstr "kliknite ovde"
-
-#~ msgid "mount failed"
-#~ msgstr "montiranje nije uspelo"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux radi sa u GMT (Greenwich Mean Time) i prevodi u lokalno\n"
-#~ "uzavisnosti koju ste vremensku zonu odabrali."
-
-#~ msgid ""
-#~ "You may choose to upload updated packages that have been released after "
-#~ "the\n"
-#~ "distribution has been made available. You will get security fixes or bug\n"
-#~ "fixes, but you need to have an Internet connection configured to "
-#~ "proceed.\n"
-#~ "Answer \"Yes\" to the dialog to choose an available mirror. After "
-#~ "choosing\n"
-#~ "a mirror, a packages selection tree appears to allow you to choose "
-#~ "packages\n"
-#~ "individually, package that need to be updated are already selected, but "
-#~ "you\n"
-#~ "may choose to install other package or deselect packages. Press \"Install"
-#~ "\"\n"
-#~ "to install the updated package or \"Cancel\" not to upgrade them. (this\n"
-#~ "*REALLY* need to be modified according to real DrakX, if you need other\n"
-#~ "help section, let us (DrakX team developer) known)."
-#~ msgstr ""
-#~ "Mo¾ete izabrati da sa Interneta skinete a¾urirane pakete koji su kreirani "
-#~ "nakon\n"
-#~ "izlaska ove distribucije. Dobiæete sigurnosne ispravke ili\n"
-#~ "ispravke gre¹aka, ali morate da imate Internet konekciju pode¹enu da bi "
-#~ "nastavili.\n"
-#~ "Odgovorite \"Da\" u dijalogu da bi odobrali dostupan miror. Nakon izbora\n"
-#~ "mirora, stablo sa paketima æe se pojaviti i moæi æete da izaberete "
-#~ "pakete\n"
-#~ "pojedinaèno, paketi koji moraju da se a¾uriraju su veæizabrani, ali vi\n"
-#~ "mo¾ete izabrati druge pakete ili ih desektovati. Pritisnite \"Instaliraj"
-#~ "\"\n"
-#~ "da bi instalirali novije pakete ili \"Poni¹ti\"da ih ne bi a¾urirali. "
-#~ "(ovo\n"
-#~ "*ZAISTA* mora biti izmenjeno u skladu sa pravim DrakX-om, ukoliko vam "
-#~ "treba\n"
-#~ "pomoæ, javite (DrakX tim za razvoj) nam)."
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Ne mogu da pristupim kernelovim modulima u radu sa va¹im kernelom (fajl %"
-#~ "s nedostaje)"
-
-#~ msgid "None"
-#~ msgstr "Nijedan"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Izaberite default ¹tampaè!"
-
-#~ msgid ""
-#~ "With remote CUPS servers, you do not have to configure any printer here; "
-#~ "CUPS servers inform your machine automatically about their printers. All "
-#~ "printers known to your machine currently are listed in the \"Default "
-#~ "printer\" field. Choose the default printer for your machine there and "
-#~ "click the \"Apply/Re-read printers\" button. Click the same button to "
-#~ "refresh the list (it can take up to 30 seconds after the start of CUPS "
-#~ "until all remote printers are visible). When your CUPS server is in a "
-#~ "different network, you have to give the CUPS server IP address and "
-#~ "optionally the port number to get the printer information from the "
-#~ "server, otherwise leave these fields blank."
-#~ msgstr ""
-#~ "Sa udaljenim CUPS serverima, nemorate da ovde da pode¹avate nijedan "
-#~ "¹tampaè; CUPS serveri automatski obeva¹tavaju va¹u ma¹inu o ¹tampaèima. "
-#~ "Svi ¹tampaèi koji su pronaðeni na va¹oj ma¹ini su prikazani u \"Default "
-#~ "printer\" polju. Izaberite default ¹tampaè za va¹u ma¹inu i klinkite na"
-#~ "\"Apply/Re-read printers\" taster. Kliknite na isti taster da bi osve¾ili "
-#~ "listu (potrebno je do 30 sekundi nakon pokretanja CUPS-a d bi svi "
-#~ "udaljeni ¹tampaèi bili vidljivi).Kada se va¹ CUPS server nalazi na "
-#~ "drugaèijoj mre¾i, morate da date CUPS serverovu IP adresu i (opcija) broj "
-#~ "porta da bi dobavili informacijeo ¹tampaèu od servera, ili ostavita ova "
-#~ "polja praznima."
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Primeni/Ponovo uèitaj ¹tampaèe"
-
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Da bi saznali koje sve komande imate na raspolaganju za tekuæi ¹tampaè "
-#~ "proèitajte donju listu ili kliknite na \"Lista opcija ¹tampaèa\" taster. %"
-#~ "s\n"
-#~ "\n"
-
-#~ msgid "Configure printing system"
-#~ msgstr "Podesi sistem za ¹tampanje"
-
-#~ msgid "Use incremental backup   \t"
-#~ msgstr "Koristi inkrementalni backup "
-
-#~ msgid "Please choose where you want to c"
-#~ msgstr "Izaberite gde ¾elite da backup-ujete podatke"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr "Ovaj %s skener koristi paralelni port, koji nije trenutno podr¾an"
diff --git a/perl-install/share/po/sv.po b/perl-install/share/po/sv.po
deleted file mode 100644
index e02271f70..000000000
--- a/perl-install/share/po/sv.po
+++ /dev/null
@@ -1,12343 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Andreas Berglund <andreas.berglund@home.se>, 1999
-# Robert Jungstedt <master@linux.nu>, 1999
-# David Hedbor <david@hedbor.org>, 2000
-# Egil Möller <redhog@mandrakesoft.com>, 2000
-# Mattias Dahlberg <voz@home.se>, 2001, 2002.
-# Mattias Newzella <newzella@linux.nu>, 2001,2002.
-# Cecilia Johnsson <datb@swipnet.se>, 2002
-# Henrik Borg <datb@swipnet.se>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-12 19:03+0100\n"
-"Last-Translator: Mattias Dahlberg <voz@home.se>\n"
-"Language-Team: Swedish <sv@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Anpassa alla huvuden separat"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Använd Xinerama-utökning"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurera endast kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Anpassa \"multi-head\""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ditt system stöder \"multi-head\"-konfiguration.\n"
-"Vad vill du göra?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikkort"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Välj ett grafikkort"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Välj en X-server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Välj en X-drivrutin"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-drivrutin"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Vilken XFree-konfiguration vill du använda?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ditt kort kan få hårdvarustöd för 3D-acceleration, men bara med XFree %s.\n"
-"Ditt kort stöds av XFree %s, som kan vara bättre för 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ditt kort kan få hårdvarustöd för 3D-acceleration med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med hårdvarubaserad 3D-acceleration"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ditt kort kan få hårdvarustöd för 3D-acceleration med XFree %s,\n"
-"OBSERVERA: DETTA ÄR EXPERIMENTELLT STÖD OCH KAN HÄNGA DIN DATOR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EXPERIMENTELLT hårdvarustöd för 3D-acceleration."
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ditt kort kan få hårdvarustöd för 3D-acceleration, men bara med XFree %s,\n"
-"OBSERVERA: DETTA ÄR EXPERIMENTELLT STÖD OCH KAN HÄNGA DIN DATOR.\n"
-"Ditt kort stöds av XFree %s som kan vara bättre för 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (skärmdrivrutininstallation)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree-konfiguration"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Välj minnesstorlek på ditt grafikkort"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Välj alternativ för server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Välj en bildskärm"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Bildskärm"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De två mest kritiska värdena är den vertikala uppdateringsfrekvensen,\n"
-"som är den hastighet som hela skärmen uppdateras i, och framförallt\n"
-"den horisontella synkroniseringshastigheten, som är den hastighet som\n"
-"scan-linjerna visas i.\n"
-"\n"
-"Det är VÄLDIGT VIKTIGT att du inte väljer värden för en skärmtyp som går\n"
-"utanför kapaciteten för din bildskärm; du kan då förstöra skärmen.\n"
-"Välj konservativa värden om du är osäker."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horisontell uppdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikal uppdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Bildskärm ej konfigurerad"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafikkortet är inte konfigurerat ännu"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Upplösningar ej valda ännu"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Vill du prova konfigurationen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varning: att prova detta grafikkort kan låsa datorn"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test av konfigurationen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"försök ändra några parametrar"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ett fel uppstod:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Avslutar om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Är denna inställning korrekt?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ett fel uppstod, försök att ändra några parametrar."
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Upplösning"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Välj upplösning och färgdjup"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkort: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mer"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Expertläge"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Visa alla"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Upplösningar"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tangentbordslayout: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Mustyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musenhet: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Bildskärm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Bildskärm horisynk: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Bildskärm vertuppdatering: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkortsidentifiering: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafikminne: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Färgdjup: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Upplösning: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drivrutin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Förbereder konfiguration av X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Vad vill du göra?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Ändra bildskärm"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ändra grafikkort"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Ändra serverinställningar"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Ändra upplösning"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Visa information"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testa igen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Avsluta"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behålla ändringarna?\n"
-"Aktuell konfiguration är:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X vid uppstart"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Datorn kan ställas in så att X startas automatiskt vid uppstart.\n"
-"Vill du att X ska starta när du startar om?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Logga in i %s igen för att aktivera ändringarna"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Logga ut och använd sedan Ctrl-Alt-Backsteg"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 färger (8 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusen färger (15 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusen färger (16 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoner färger (24 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljarder färger (32 bitar)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB eller mer"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 i 87 Hz interlaced (ingen 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 i 87 Hz interlaced, 800x600 i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 i 60 Hz, 640x480 i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 i 60 Hz, 800x600 i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency som klarar 1280x1024 i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency som klarar 1280x1024 i 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency som klarar 1280x1024 i 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Bildskärm som klarar 1600x1200 i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Bildskärm som klarar 1600x1200 i 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Första sektorn på startpartitionen"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Första sektorn på disken (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO-installation"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Var vill du installera starthanteraren?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Installation av Lilo/Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO med textbaserad meny"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk meny"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Starta från DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Starthanterarens huvudalternativ"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Starthanterare som ska användas"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installation av starthanterare"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Startenhet"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (fungerar inte med gamla BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Videoläge"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Fördröjning innan förvald avbild startar"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Lösenord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Lösenord (bekräfta)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Begränsa alternativen för kommandoraden"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "begränsa"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Rensa /tmp vid varje uppstart"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ange RAM-storlek om nödvändigt (hittade %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Aktivera användning av flera profiler"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Ange RAM-storlek i MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Alternativet \"Begränsa alternativen för kommandoraden\" är värdelöst utan "
-"lösenord."
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Försök igen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Du angav inte samma lösenord"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init Message"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware-fördröjning"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tidsgräns för kärnuppstart"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Aktivera cd-start?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Aktivera OF-start?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Standard-OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Du valde att installera starthanteraren på en partition.\n"
-"Det antyder att du redan har en starthanterare på den hårddisk du startar på "
-"(t.ex. System Commander).\n"
-"\n"
-"Vilken hårddisk startar du på?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Följande poster finns.\n"
-"Du kan lägga till fler eller ändra på befintliga."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Lägg till"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Färdig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ändra"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Vilket sorts post vill du lägga till?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Annat OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Annat OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Annat OS (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Avbild"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Lägg till"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Läs-skriv"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabell"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Osäker"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etikett"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-storlek"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ta bort post"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tom etikett tillåts inte"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Du måste ange en kärnavbild"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Du måste ange en rotpartition"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Denna etikett används redan"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Hittade %s %s gränssnitt"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Har du ett till?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du något %s-gränssnitt?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nej"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Visa hårdvaruinformation"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerar drivrutin för %s kort %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Vilken %s drivrutin ska testas?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I vissa fall behöver drivrutinen %s extra information för att fungera\n"
-"korrekt. Vanligtvis fungerar det ändå. Vill du specificera extra\n"
-"information eller låta drivrutinen leta efter informationen själv?\n"
-"Ibland kan sökningen låsa datorn, men det ska inte\n"
-"ställa till med någon skada."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Prova automatiskt"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Ange alternativ"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Du kan nu ange alternativen till modul %s.\n"
-"Notera att alla adresser ska inledas med prefixet 0x, t.ex. 0x123."
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu ange parametrar till modulen %s.\n"
-"Parametrar i formatet \"name=value name2=value2...\".\n"
-"Till exempel, \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulalternativ:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulen %s kunde inte laddas.\n"
-"Vill du försöka igen med andra parametrar?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "åtkomst till X-program"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "åtkomst till RPM-verktyg"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "tillåt \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "åtkomst till administrativa filer"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s finns redan)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Det här lösenordet är för enkelt"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Ange ett användarnamn"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Användarnamnet får endast innehålla små bokstäver, siffror,\"-\" och \"_\""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Det här användarnamnet finns redan"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Lägg till användare"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Ange en användare\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Acceptera användare"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Fullständigt namn"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Användarnamn"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Skal"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatisk inloggning"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Datorn kan ställas in så att den automatiskt loggar in en användare.\n"
-"Vill du använda denna funktion?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Välj standardanvändare:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Välj fönsterhanteraren som ska användas:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Välj språket som ska användas."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Du kan välja ytterligare språk som ska finnas tillgängliga efter "
-"installationen."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alla"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Tillåt alla användare"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Anpassad"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Dela ej med"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paketet %s måste installeras. Vill du installera det?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Du kan exportera med NFS eller Samba. Vilken vill du använda?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Det obligatoriska paketet %s saknas"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Vill du tillåta användare att exportera kataloger från deras hemkatalog?\n"
-"Det gör det möjligt för användare att klicka på \"Dela ut\" i Konqueror och "
-"Nautilus.\n"
-"\n"
-"\"Anpassad\" ställer in det per användare.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Avbryt"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Starta userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Utdelning per användare använder gruppen \"fileshare\". \n"
-"Använd userdrake för att lägga till användare till denna grupp."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Välkommen crackers!"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Låg"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hög"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Högre"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Den här nivån ska användas med försiktighet. Den gör ditt system enklare\n"
-"att använda, men även väldigt känsligt. Den ska inte användas på en dator\n"
-"som är ansluten till andra datorer eller till Internet. Lösenord används "
-"inte."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lösenord är nu aktiverade, men att använda systemet i ett nätverk är ändå "
-"inte att rekommendera."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Detta är den standardsäkerhet som rekommenderas för en dator som kommer att "
-"vara ansluten till Internet som klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Det finns några begränsningar och fler automatiska kontroller körs varje "
-"natt."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"På den här säkerhetsnivån är det möjligt att använda systemet som en "
-"server.\n"
-"Säkerheten är hög nog för en server som tillåter att många klienter ansluter "
-"mot den.\n"
-"Observera: om din dator enbart är en klient bör du välja en lägre nivå."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baserat på föregående nivå, men systemet är helt stängt.\n"
-"Alla säkerhetsfunktioner är aktiverade."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Välj säkerhetsnivå"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Säkerhetsnivå"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Använd \"libsafe\" för servrar"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Ett bibliotek som skyddar dig mot \"buffer overflow\"- och \"format string\"-"
-"attacker."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Välkommen till operativsystemväljaren %s!\n"
-"\n"
-"Välj ett operativsystem i listan ovan eller\n"
-"vänta i %d sekunder för standardstart.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Välkommen till operativsystemväljaren Grub!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Använd tangenterna %c och %c för att välja vad som ska markeras."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Tryck Enter för att starta valt operativsystem, \"e\" för att redigera."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandon innan start, eller \"c\" för kommandorad."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Markerat alternativ kommer att starta automatiskt om %d sekunder."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "inte tillräckligt med utrymme på /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Skrivbord"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start-menyn"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan inte installera starthanteraren på en %s-partition.\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ingen hjälp finns implementerad ännu.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Anpassning av startutförande"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Arkiv"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Arkiv/_Avsluta"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Ny stil kategoriseringsmonitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Ny stil monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionell monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionell Gtk+-monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Kör Aurora vid uppstart"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub-läge"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot-läge"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du använder för närvarande %s som starthanterare.\n"
-"Klicka på Konfigurera för att starta inställningsguiden."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurera"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systemläge"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Kör X-Window-systemet vid start"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nej, jag vill inte ha automatisk inloggning"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Ja, jag vill ha automatisk inloggning med denna (användare, skrivbordsmiljö)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Ok"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Kan inte öppna /etc/inittab för läsning: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuter"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kan inte ta skärmdumpar före partitionering"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Skärmdumpar kommer att finnas tillgängliga efter installationen i %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Franskt"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Ricanskt"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgiskt"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tjekiskt"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Tyskt"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grekiskt"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norskt"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Svenskt"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nederländskt"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italienskt"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Österrikiskt"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Amerikanskt"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Säkerhetskopiera din data först"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Läs noggrant!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Om du tänker använda aboot, se till att lämna ledigt utrymme (2048 sektorer "
-"räcker)\n"
-"i början av disken."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fel"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Guide"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Välj åtgärd"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har en stor FAT-partition\n"
-"(normalt använd av Microsoft DOS/Windows).\n"
-"Du rekommenderas att ändra storleken på den partitionen.\n"
-"(Klicka på den och sedan på Ändra storlek)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klicka på en partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalförande fs"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Växlingsutrymme"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Annan"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Filsystemtyper:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Skapa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Använd \"%s\" i stället"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Ta bort"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Använd \"Unmount\" först"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter ändring av partitionstyp %s kommer all data på denna partition att "
-"försvinna."
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Välj en partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Välj en annan partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Avsluta"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Byt till expertläge"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Byt till normalläge"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Ångra"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Fortsätta ändå?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Avsluta utan att spara"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Avsluta utan att skriva partitionstabellen?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Vill du spara /etc/fstab-ändringar?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Allokera automatiskt"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Nollställ"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Information om hårddisk"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alla primära partitioner används"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Det går inte att lägga till fler partitioner"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"För att få fler partitioner, ta bort en för att sedan kunna skapa en utökad "
-"partition."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Spara partitionstabell"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Återskapa partitionstabell"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Rädda partitionstabell"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ladda om partitionstabell"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatisk montering av flyttningsbar media"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Välj fil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Den säkerhetskopierade partitionstabellen har inte samma storlek.\n"
-"Fortsätta ändå?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varning"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sätt in en diskett i diskettstationen.\n"
-"All data på denna diskett kommer att tas bort."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Försöker återskapa partitionstabellen"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljerad information"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Monteringspunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Alternativ"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ändra storlek"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Flytta"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatera"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montera"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Addera till RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Addera till LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Avmontera"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ta bort från RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ta bort från LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ändra RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Använd till loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Skapa en ny partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Startsektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Storlek i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Typ av filsystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Monteringspunkt: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Inställning: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ta bort loopback-filen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Ändra partitionstyp"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Vilket filsystem vill du använda?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Byter från Ext2 till Ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Var vill du montera loopback-filen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Var vill du montera enheten %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan inte inaktivera monteringspunkten eftersom denna partition\n"
-"används för loopback. Ta bort loopback först."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Räknar ut FAT-filsystemets gränser"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ändrar storlek"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Denna partition kan inte ändra storlek"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "All data på den här partitionen bör säkerhetskopieras."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter storleksändring av partition %s, kommer all data på den att vara borta."
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Välj den nya storleken"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Ny storlek i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Vilken hårddisk vill du flytta den till?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Vilken sektor vill du flytta den till?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Flyttar"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Flyttar partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Välj en existerande RAID att addera till"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Välj en existerande LVM att addera till"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM-namn?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Denna partition kan inte användas för loopback."
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback-filnamn: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Ange ett filnamn"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen används redan av en annan loopback, välj en annan."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Filen finns redan. Använda den?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Monteringsalternativ"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "enhet"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivå"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "blockstorlek"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Var försiktig: Detta moment är farligt."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Vilken typ av partitionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jag vägrar skapa /boot så långt in på disken (på en cylinder > 1024).\n"
-"Antingen använder du Lilo, som inte kommer fungera eller så\n"
-"använder du inte Lilo och då behöver du inte /boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partitionen du har valt att använda som rot (/) är fysiskt placerad\n"
-"efter den 1024:e cylindern på hårddisken och du har ingen /boot-partition.\n"
-"Om du tänkt använda Lilo som starthanterare måste du lägga till en\n"
-"/boot-partition."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valt en mjukvaru-RAID-partition som rot (/).\n"
-"Det finns ingen starthanterare som hanterar detta utan\n"
-"en /boot-partition. Se till att skapa en /boot-partition."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen på disk %s kommer att skrivas till disk."
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du behöver starta om datorn innan ändringarna kan verkställas."
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formateringen av partition %s kommer allt data på partitionen att "
-"försvinna."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formaterar"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterar loopback-filen %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterar partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Dölj filer"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Flytta filer till den nya partitionen"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Katalogen %s innehåller redan data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Flyttar filerna till den nya partitionen"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierar %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Tar bort %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partitionen %s är känd som %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Enhet: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-enhetsbokstav: %s (bara en gissning)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Namn: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Storlek: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d till %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formaterad\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Inte formaterad\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Monterad\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Förvald partition för uppstart\n"
-"    (för MS-DOS-start, inte för Lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivå %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blockstorlek %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskar %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnamn: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Chansen finns att denna partition\n"
-"är en drivrutinspartition, du bör\n"
-"antagligen lämna den i fred.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denna speciella Bootstrap-\n"
-"partition är till för att\n"
-"kunna starta flera operativsystem på ditt system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Storlek: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometri: %s cylindrar, %s huvuden, %s sektorer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Information: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskar %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellstyp: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "på buss %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Alternativ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Krypteringsnyckel för filsystem"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Välj din krypteringsnyckel för filsystemet"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Den här krypteringsnyckeln är för enkel (den måste vara minst %d tecken lång)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Krypteringsnycklarna matchar inte"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Krypteringsnyckel"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Krypteringsnyckel (igen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Ändra typ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klicka på ett media"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Sök servrar"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering av %s misslyckades"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Vet inte hur man formaterar %s i typ %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "försöket att montera partition %s i katalog %s misslyckades"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck misslyckades, med slutkod %d eller signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fel vid avmontering %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "enkel"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "med /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan inte använda JFS på partitioner mindre än 16MB."
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan inte använda ReiserFS på partitioner mindre än 32MB."
-
-#
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringspunkter måste börja med /."
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Det finns redan en partition med monteringspunkt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan inte använda en LVM Logical Volume som monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Denna katalog bör lämnas i rotfilsystemet."
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Du behöver ett riktigt filsystem (Ext2, Reiserfs) för denna "
-"monteringspunkt.\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Du kan inte använda ett krypterat filsystem för monteringspunkten %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Inte tillräckligt med utrymme för automatisk allokering"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ingenting att göra"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fel vid öppnande av %s för läsning: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ett fel har uppstått - inga giltiga enheter som kan användas för att skapa "
-"nya filsystem kunde hittas. Kontrollera hårdvaran för orsaken till problemet."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Du har inga partitioner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux är ett fleranvändarsystem, med detta menas att varje användare\n"
-"kan ha sina egna inställningar, sina egna filer och så vidare. Du kan\n"
-"läsa i användarmanualen för att lära dig mer. Men olikt \"root\", som\n"
-"är administratör, kan användarna som du lägger till här inte ändra\n"
-"någonting förutom sina egna filer och sina egna inställningar.\n"
-"Du måste skapa åtminstone en vanlig användare åt dig själv.\n"
-"Det kontot ska du använda i ditt dagliga arbete. Det är i och för\n"
-"sig väldigt praktiskt att logga in som \"root\" varje dag men det kan\n"
-"också vara väldigt farligt! Det minsta misstag kan innebära att ditt\n"
-"system inte fungerar längre. Om du gör ett allvarligt misstag som en\n"
-"vanlig användare förlorar du bara viss information och inte hela systemet.\n"
-"\n"
-"Först måste du ange ditt riktiga namn. Det här är inte obligatoriskt,\n"
-"du kan faktiskt skriva vad du vill. DrakX kommer att ta de första två\n"
-"orden som du skrev in i rutan och flytta över de till användarnamnet.\n"
-"Detta är namnet som den här användaren kommer att använda för att logga\n"
-"in på systemet. Du kan ändra det om du vill. Du måste sedan ange ett\n"
-"lösenord. En icke-privilegierad (vanlig) användares lösenord är inte\n"
-"lika viktigt som \"roots\" sett ur säkerhetssynpunkt, men det finns\n"
-"ingen anledning att ignorera det, det är ju trots allt dina filer som\n"
-"står på spel.\n"
-"\n"
-"Efter det att du klickat på Acceptera användare kan du sedan lägga\n"
-"till så många som du vill ha. Lägg till en användare för varje kompis som\n"
-"du har: din pappa eller din syster till exempel. När du har lagt till alla\n"
-"användare som du vill ha, välj Klar.\n"
-"\n"
-"Om du klickar på Avancerat kan du ändra det förvalda \"skalet\"\n"
-"för den användaren (bash är förvalt)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Listat ovan är de existerande Linux-partitionerna som hittats på\n"
-"hårddisken. Du kan behålla valen som gjorts av guiden, de passar de flesta\n"
-"vanliga installationer. Om du gör några ändringar måste du åtminstone\n"
-"definiera en rotpartition (\"/\"). Välj inte en för liten partition för\n"
-"då kommer du inte kunna installera tillräckligt med mjukvara. Om du vill\n"
-"lagra din data på en separat partition, behöver du också skapa en partition\n"
-"för /home (endast möjligt om du har mer än en Linux-partition tillgänglig).\n"
-"\n"
-"Varje partition listas som följer: \"Namn\", \"Kapacitet\".\n"
-"\n"
-"\"Namn\" är strukturerad på följande vis: \"hårddisktyp\", \"hårddisknummer"
-"\",\n"
-"\"partitionsnummer\" (till exempel, \"hda1\").\n"
-"\n"
-"\"Hårddisktyp\" är \"hd\" om din hårddisk är en IDE-hårddisk och\n"
-"\"sd\" om det är en SCSI-hårddisk.\n"
-"\n"
-"\"Hårddisknummer\" är alltid en bokstav efter \"hd\" eller \"sd\". För IDE-\n"
-"hårddiskar:\n"
-"\n"
-" * \"a\" betyder \"master-hårddisk på den primära IDE-kontrollern\",\n"
-"\n"
-" * \"b\" betyder \"slavhårddisk på den primära IDE-kontrollern\",\n"
-"\n"
-" * \"c\" betyder \"master-hårddisk på den sekundära IDE-kontrollern\",\n"
-"\n"
-" * \"d\" betyder \"slavhårddisk på den sekundära IDE-kontrollern\".\n"
-"\n"
-"Med SCSI-hårddiskar betyder ett \"a\" \"lägsta SCSI-ID\", ett \"b\" betyder\n"
-"\"andra lägsta SCSI-ID\", etc."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Installationen av Mandrake Linux är utspridd på flera cd-skivor. DrakX\n"
-"vet om ett valt paket finns på en annan cd-skiva och kommer att mata ut\n"
-"den aktuella cd:n och be dig sätta in en annan om det blir nödvändigt."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det är nu dags att ange vilka program du vill installera på ditt\n"
-"system. Det finns flera tusen paket tillgängliga för Mandrake Linux och\n"
-"det är inte meningen att du ska känna till alla.\n"
-"\n"
-"Om du utför en standardinstallation från cd kommer du först att\n"
-"få ange vilka cd-skivor du har till hands (endast i Expert-läge).\n"
-"Kontrollera cd-skivornas etiketter och markera rutorna som\n"
-"motsvarar de cd-skivor du har. Klicka \"Ok\" när du är klar.\n"
-"\n"
-"Paketen är sorterade i grupper som motsvarar olika användningsområden\n"
-"för din dator. Grupperna är i sig sorterade i fyra sektioner:\n"
-"\n"
-" * \"Arbetsstation\": Om du ska använda datorn som arbetsstation,\n"
-"välj en eller flera av de motsvarande grupperna.\n"
-"\n"
-"* \"Utveckling\": om datorn ska användas för programmering välj de\n"
-"önskade grupperna.\n"
-"\n"
-"* \"Server\": om datorn ska användas som server, kan du här\n"
-"välja de mest vanliga tjänsterna som du vill ha installerade på den.\n"
-"\n"
-" * \"Grafisk miljö\": slutligen, här väljer du den grafiska miljö som du\n"
-"vill använda. Välj åtminstone en om du vill ha ett grafiskt gränssnitt på\n"
-"din arbetsstation.\n"
-"\n"
-"Om du flyttar muspekaren över ett gruppnamn får du se en kort\n"
-"förklaringstext för just den gruppen. Om du inte väljer någon grupp när\n"
-"du installerar (och inte uppdaterar), kommer en dialogruta att visas och\n"
-"föreslå olika minimala installationer:\n"
-"\n"
-" * \"Med X\" Installera det minsta antalet paket som behövs för att få en\n"
-"fungerande grafisk skrivbordsmiljö.\n"
-"\n"
-" * \"Med grundläggande dokumentation\" Installerar grundsystemet plus\n"
-"grundläggande verktyg och dess dokumentation. Denna installation lämpar\n"
-"sig för en server.\n"
-"\n"
-"* \"Minimal installation\" Installerar det absolut minsta antalet paket som\n"
-"behövs för ett Linux-system, utan några grafiska system. Denna installation\n"
-"är ca 65Mb stor.\n"
-"\n"
-"Du kan markera \"Välj enskilda paket\" som är användbart om du vet vilka\n"
-"paket du vill ha installerade eller om du vill ha fullständig kontroll över\n"
-"vad som blir installerat.\n"
-"\n"
-"Om du startade installationen i uppdateringsläge, kan du avmarkera alla\n"
-"grupper för att undvika installation av nya paket. Detta är användbart\n"
-"för att reparera eller uppdatera ett befintligt system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Slutligen, beroende på om du väljer att installera enskilda paket eller\n"
-"inte, kommer du att få se ett träd innehållande alla paket klassificerade\n"
-"efter grupper och undergrupper. Om du bläddrar i trädet kan du välja hela\n"
-"grupper, undergrupper, eller enskilda paket.\n"
-"\n"
-"När du väljer ett paket i trädet, visas en beskrivning till höger.\n"
-"När du har valt klart, klicka på Installera. Då kommer själva\n"
-"installationen att starta. Beroende på hastigheten på din hårdvara och\n"
-"på hur många paket som ska installeras kan det här processen ta en stund.\n"
-"En uppskattad återstående tid visas på skärmen för att visa dig ungefär hur\n"
-"lång tid som är kvar av installationen, du kanske hinner gå och dricka en\n"
-"kopp kaffe.\n"
-"\n"
-"Om det skulle visa sig att ett serverpaket har valts antingen\n"
-"oavsiktligt eller om det var med i en hel grupp, kommer du att få bekräfta\n"
-"att du verkligen vill att dessa servrar ska installeras. Under Mandrake\n"
-"Linux startas installerade servrar vid uppstart. Även fast de är säkra när\n"
-"den här distributionen släpps, kan det hända att säkerhetsluckor hittats\n"
-"i efterhand. Om du inte vet vad en specifik tjänst gör eller varför den\n"
-"blir installerad, klicka Nej här. Om du klickar Ja kommer de\n"
-"listade tjänsterna att installeras och startas automatiskt!\n"
-"\n"
-"Alternativet \"Automatiska beroenden\" inaktiverar helt enkelt\n"
-"varningsdialogrutan som visas när installationsprogrammet automatiskt\n"
-"väljer ett paket. Detta inträffar därför att det har upptäckts att ett\n"
-"beroende med ett annat paket måste tillfredsställas för att detta paket\n"
-"ska kunna installeras ordentligt.\n"
-"\n"
-"Den lilla diskettikonen i slutet på listan låter dig ladda en paketlista\n"
-"som du kan ha gjort vid en tidigare installation. När du klickar på den\n"
-"här ikonen kommer du att bli ombedd om att stoppa i en diskett som du\n"
-"tidigare kan ha skapat vid slutet av en annan installation. Se det andra\n"
-"tipset i det sista steget hur du gör för att skapa en sådan diskett."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Du ska nu ställa in din Internet/nätverksanslutning. Om du har som avsikt\n"
-"att ansluta din dator till Internet eller till ett lokalt nätverk, clicka "
-"\"OK\"\n"
-"Det startar den automatiska sökningen efter nätverksenheter och modem.\n"
-"Om sökningen misslyckas, avmarkera \"Använd automatisk identifiering\". Du\n"
-"kan också välja att inte konfigurera nätverket vid denna tidpunkt, klicka\n"
-"i så fall på knappen \"Avbryt\".\n"
-"\n"
-"Möjliga anslutningar är: vanligt modem, ISDN-modem, ADSL-anslutning,\n"
-"kabelmodem och slutligen vanlig LAN-anslutning (Ethernet).\n"
-"\n"
-"Vi går inte igenom varje anslutning i detalj. Se bara till att du har den "
-"information\n"
-"som du fått från din Internetleverantör eller administratör till hands.\n"
-"\n"
-"Du kan läsa kapitlet om Internetanslutning i manualen för en djupare "
-"genomgång\n"
-"om konfigurationen, eller helt enkelt vänta tills systemet är installerat "
-"och sedan\n"
-"använda programmet som det står om i manualen för att anpassa din "
-"anslutning.\n"
-"\n"
-"Om du vill konfigurera nätverket senare eller är klar med din anslutning\n"
-"klicka på \"Avbryt\". "
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Välj vilka tjänster du vill starta vid uppstart.\n"
-"\n"
-"Här visas alla tjänster tillgängliga med den aktuella installationen.\n"
-"Titta igenom dem och avmarkera dem du inte behöver vid uppstart.\n"
-"\n"
-"Du kan få en kort förklaringstext om en tjänst genom att välja den\n"
-"specifika tjänsten. Om du är osäker på om en tjänst är användabar eller\n"
-"inte, lämna då den tjänsten orörd.\n"
-"\n"
-"Var extra försiktig i dina val om den här datorn ska användas som en\n"
-"server: du vill antagligen inte starta tjänster som du inte behöver.\n"
-"Kom ihåg att flera tjänster kan innebära en risk om de aktiveras på\n"
-"en server. Som generell regel, välj bara de tjänster du verkligen behöver."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux utgår från GMT (Greenwich Mean Time) och översätter det till\n"
-"lokal tid enligt den tidszon du har valt. Det är dock möjligt att "
-"inaktivera\n"
-"detta genom att avmarkera \"Hårdvaruklocka ställd till GMT\" så att\n"
-"hårdvaruklockan blir samma som systemklockan. Det är användbart när\n"
-"datorn är värd för andra operativsystem såsom Windows.\n"
-"\n"
-"Alternativet \"Automatisk tidsynkronisering\" gör så att klockan ställs\n"
-"automatiskt genom att datorn kontaktar en server på Internet. I den lista\n"
-"som sedan presenteras väljer du den server som ligger närmast dig. \n"
-"Naturligtvis måste du vara uppkopplad mot Internet för att detta ska "
-"fungera.\n"
-"Det läggs in en tidserver på din dator och den kan, om så önskas, användas\n"
-"av andra datorer i ditt lokala nätverk."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (för X Window System) är hjärtat i GNU/Linux grafiska gränssnitt\n"
-"på vilket alla grafiska skrivbordsmiljöer (KDE, Gnome, AfterStep,\n"
-"WindowMaker, etc.) som kommer med Mandrake Linux stödjer sig på. I den\n"
-"här sektionen kommer DrakX att försöka konfigurera X automatiskt.\n"
-"\n"
-"Det är väldigt sällsynt att det misslyckas, det kan hända om du har\n"
-"väldigt gammal hårdvara (eller väldigt ny). Om det lyckas kommer X att\n"
-"startas automatiskt med den bästa tänkbara upplösningen beroende på\n"
-"storleken på din bildskärm. Ett fönster kommer att visas och frågar dig\n"
-"om du kan se det.\n"
-"\n"
-"Om du gör en \"Expert\"-installation kommer du in i konfigurationsguiden\n"
-"för X. Se den motsvarande sektionen i manualen för mer information\n"
-"om den här guiden.\n"
-"\n"
-"Om du kan se meddelandet och svarar Ja, kommer DrakX att fortsätta till\n"
-"nästa steg. Om du inte kan se meddelandet, betyder det att konfigurationen\n"
-"var felaktig och testet kommer automatiskt att avslutas efter 10 sekunder\n"
-"och skärmen återställs."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Första gången du provar X-konfigurationen kanske du inte är nöjd med\n"
-"bilden (skärmen är för liten, förskjuten till vänster eller höger...).\n"
-"Även om X startar korrekt kommer DrakX att fråga dig om konfigurationen\n"
-"passar dig. DrakX kommer även föreslå en ändring av konfigurationen genom\n"
-"att visa en lista på alla giltiga lägen som den kunde hitta och be dig\n"
-"välja ett.\n"
-"\n"
-"Som en sista utväg, om du fortfarande inte kan få X att fungera, välj\n"
-"Ändra grafikkort och sedan \"Unlisted card\". När du får frågan om\n"
-"vilken server du vill använda, välj \"FBDev\". Detta är ett felsäkert\n"
-"alternativ som fungerar med alla moderna grafikkort. Välj sedan\n"
-"\"Testa igen\" för att vara säker på att det fungerar."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Slutligen kommer du att få en fråga om du vill se det grafiska gränssnittet\n"
-"vid uppstart. Observera att du kommer att få den här frågan även om du\n"
-" valde att inte testa konfigurationen. Du vill nog svara \"Nej\" om datorn "
-"ska\n"
-"användas som server eller om du inte lyckades få det grafiska att fungera."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux cd-skiva har ett inbyggt reparationssläge. Du kan komma åt\n"
-"det genom att starta från cd-skivan och sedan trycka på tangenten >>F1<<\n"
-"vid uppstart och skriva >>rescue<< vid prompten. Om din dator inte kan\n"
-"starta från cd-skiva bör du komma tillbaka till det här steget i åtminstone\n"
-"två situationer:\n"
-"\n"
-" * när starthanteraren installeras kommer DrakX att skriva över "
-"startsektorn\n"
-"(MBR) på din huvuddisk (om du inte använder en annan starthanterare) så att\n"
-"du kan starta antingen Windows eller GNU/Linux (om du nu har Windows\n"
-"installerat på din dator). Om du blir tvungen att installera om Windows\n"
-"så kommer Microsofts installationsprogram att skriva över startsektorn\n"
-"vilket leder till att du inte kan starta GNU/Linux!\n"
-"\n"
-" * om ett problem uppstår så att du inte kan starta GNU/Linux från\n"
-"hårddisken kommer den här disketten att vara det enda sättet att starta\n"
-"GNU/Linux. Den innehåller ett antal systemverktyg som kan användas för att\n"
-"återställa ett system som kraschat på grund av strömavbrott, en olycklig\n"
-"felstavning, en felskrivning i ett lösenord eller av någon annan anledning.\n"
-"\n"
-"När du klickar på det här steget kommer du att bli ombedd att stoppa in en\n"
-"diskett i diskettstationen. Disketten som du stoppar in måste vara tom\n"
-"eller inte innehålla någon data som du vill ha kvar. Du behöver inte "
-"formatera\n"
-"den eftersom DrakX kommer att skriva om hela disketten."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Nu måste du välja var på hårddisken du vill installera Mandrake\n"
-"Linux operativsystem. Om den är tom eller om ett befintligt\n"
-"operativsystem använder allt tillgängligt utrymme behöver du partitionera\n"
-"den. Att partitionera en hårddisk går ut på att man logiskt delar upp den\n"
-"för att skapa utrymme för ditt nya Mandrake Linux-system.\n"
-"\n"
-"Eftersom resultatet av en partitionering vanligtvis inte går att ångra\n"
-"kan partitionering kännas skrämmande om du är en ovan användare.\n"
-"Denna guide förenklar processen. Innan du börjar, titta i manualen\n"
-"och ta den tid du behöver.\n"
-"\n"
-"Om du installerar i Expert-läget kommer du in i Mandrake Linux\n"
-"partitionsverktyg: Diskdrake. Detta program låter dig finjustera dina\n"
-"partitioner. Se kapitlet om Diskdrake i manualen. I gränssnittet för\n"
-"installation kan du starta den guide som det står om här genom att\n"
-"klicka på knappen \"Guide\".\n"
-"\n"
-"Om partitioner redan är definierade (från en tidigare installation eller av\n"
-"ett annat partitionsverktyg) behöver du bara välja dem du vill använda\n"
-"för att installera ditt Linux-system.\n"
-"\n"
-"Om partitioner inte redan har definierats, behöver du skapa dem genom\n"
-"att använda guiden. Beroende på din hårddiskkonfiguration, kommer flera\n"
-"alternativ att finnas tillgängliga:\n"
-"\n"
-" * \"Använd ledigt utrymme\": det här leder till en automatisk\n"
-"partitionering av din tomma disk. Du kommer inte att få några fler frågor.\n"
-"\n"
-" * \"Använd existerande partition\": guiden har hittat en eller flera\n"
-"Linux-partitioner på din hårddisk. Om du vill använda dem, välj detta\n"
-"alternativ.\n"
-"\n"
-" * \"Använd ledigt utrymme på Windows-partitionen\": Om Microsoft Windows\n"
-"är installerat på hårddisken och tar upp allt tillgängligt utrymme, måste\n"
-"du skapa ledigt utrymme för Linux-data. För att göra det kan du radera din\n"
-"Microsoft Windows-partition och data (se lösningarna \"Rensa hela\n"
-"hårddisken\" eller \"Expert-läge\") eller ändra storlek på din Microsoft\n"
-"Windows-partition. Ändra storlek kan utföras utan att förlora data.\n"
-"Denna lösning rekommenderas om du vill använda både Mandrake Linux\n"
-"och Microsoft Windows på samma dator.\n"
-"\n"
-"   Innan du väljer denna lösning måste du förstå att storleken på din\n"
-"Microsoft Windows-partition kommer att bli mindre än den är för närvarande.\n"
-"Det betyder att du kommer att ha mindre utrymme under Microsoft Windows för\n"
-"att lagra data eller installera ny mjukvara.\n"
-"\n"
-" * \"Rensa hela hårddisken\": Om du vill ta bort all data och alla\n"
-"partitioner som finns på din hårddisk och ersätta dem med ditt nya\n"
-"Mandrake Linux-system, väljer du detta alternativ. Var försiktig med\n"
-"detta alternativ eftersom du kan inte ångra dig efteråt.\n"
-"\n"
-"   Om du väljer detta alternativ kommer all data på din disk att "
-"försvinna!!\n"
-"\n"
-" * \"Ta bort Windows\": tar helt enkelt bort allt på disken och startar en\n"
-"fräsch partitionering från grunden. All data på din disk kommer att tas\n"
-"bort.\n"
-"\n"
-"   Om du väljer detta alternativ kommer all data på din disk att "
-"försvinna!!\n"
-"\n"
-" * \"Expert-läge\": välj detta alternativ om du vill partitionera din "
-"hårddisk\n"
-"manuellt. Var försiktig - det är ett kraftfullt men farligt alternativ. Du "
-"kan\n"
-"väldigt enkelt förlora allt ditt data. Därför, välj inte detta om du inte är "
-"helt\n"
-"säker på vad du gör."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Installationen är nu färdig och ditt GNU/Linux-system är klart\n"
-"att användas. Klicka bara på \"Ok\" för att starta om systemet. Du kan "
-"starta\n"
-"GNU/Linux eller Windows, beroende på vilket du vill använda (om du har\n"
-"dubbla operativsystem), så fort datorn har startat upp.\n"
-"\n"
-"Knappen Avancerat visar ytterligare två knappar som är till för att:\n"
-"\n"
-" * Generera en automatisk installationsdiskett: för att skapa en\n"
-"installationsdiskett som automatiskt utför en hel installation utan\n"
-"hjälp av en operatör, likande installationen du just konfigurerade.\n"
-"\n"
-"   Observera att två olika alternativ finns tillgängliga när du klickar på\n"
-"knappen:\n"
-"\n"
-"    * \"Repris\". Det här är en delvis automatisk installation eftersom\n"
-"partitioneringssteget (och endast detta) fortfarande är interaktivt.\n"
-"\n"
-"    * \"Automatisk\". Helt automatisk installation: allt innehåll på\n"
-"hårddisken skrivs om och all data går förlorad.\n"
-"\n"
-"   Den här funktionen är väldigt praktisk om du ska installera ett större\n"
-"antal likande datorer. Se sektionen \"Auto install\" på vår hemsida.\n"
-"\n"
-" * \"Spara paketval\"(*): sparar föregående paketval.\n"
-"När du sedan gör en annan installation, sätt in disketten i\n"
-"diskettstationen och kör installationen fram till hjälpskärmen\n"
-"F1, och skriv >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Du behöver en FAT-formaterad diskett (för att skapa en under GNU/Linux,\n"
-"skriv \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Alla partitioner som har blivit definierade måste formateras innan\n"
-"användning (formatering betyder skapa filsystem).\n"
-"\n"
-"I det här läget kanske du vill omformatera några redan existerande\n"
-"partitioner för att rensa dem på data. Om du vill göra det, välj de\n"
-"partitioner du vill formatera.\n"
-"\n"
-"Observera att det inte är nödvändigt att omformatera alla existerande\n"
-"partitioner. Du måste omformatera de partitioner som innehåller själva\n"
-"operativsystemet. (som t ex \"/\", \"/usr\" eller \"/var\") men du behöver\n"
-"inte formatera partitioner som innehåller data du vill behålla\n"
-"(vanligtvis /home).\n"
-"\n"
-"Var försiktig när du väljer partitioner, för efter formatering kommer all\n"
-"data att vara raderat och du kommer inte att kunna återskapa någonting.\n"
-"\n"
-"Klicka på Ok när du är redo att formatera partitionerna.\n"
-"\n"
-"Klicka på Avbryt om du vill välja andra partitioner att installera ditt\n"
-"nya Mandrake Linux-system på.\n"
-"\n"
-"Klicka på Avancerat för att välja på vilka partitioner du vill leta\n"
-"efter felaktiga block."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ditt nya operativsystem Mandrake Linux håller på att installeras.\n"
-"Beroende på hur många paket som ska installeras och på datorns\n"
-"hastighet, kan detta moment ta några minuter eller betydligt längre tid.\n"
-"\n"
-"Var god vänta."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Sedan denna version av Mandrake Linux släpptes är det troligt att\n"
-"några paket har uppdaterats. Fel kan ha rättats till och "
-"säkerhetsrelaterade\n"
-"problem kan ha lösts. För att du ska kunna ta del av dessa uppdateringar\n"
-"ges du nu möjligheten att ladda ner dem från Internet.\n"
-"Välj \"Ja\" om du har en aktiv Internetuppkoppling, eller \"Nej\" om du "
-"vill\n"
-"installera uppdaterade paket senare.\n"
-"\n"
-"När du väljer \"Ja\" visas en lista på ställen som det går att hämta "
-"paketen\n"
-"ifrån. Välj det som ligger närmast dig. Sedan dyker det upp en trädvy där "
-"det\n"
-"går att välja paket. Gå igenom valen och tryck sedan \"Installera\" för att "
-"ta\n"
-"emot, eller \"Avbryt\" för att avbryta."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Innan du fortsätter bör du noga läsa licensen. Den täcker hela\n"
-"Mandrake Linux-distributionen och om du inte samtycker med den,\n"
-"klicka då på Vägrar som omedelbart avbryter installationen.\n"
-"För att fortsätta installationen klicka på Acceptera."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nu är det dags att välja vilken säkerhetsnivå som ska tillämpas på\n"
-"datorn. En tumregel är att ju mer tillgänglig en dator är och ju viktigare\n"
-"dess data är, desto högre bör säkerhetsnivån vara.\n"
-"Det bör dock nämnas att nivån på säkerheten påverkar hur lättanvänd\n"
-"datorn blir. Se MSEC-kapitlet i \"Reference Manual\" för mer information\n"
-"om de olika säkerhetsnivåerna.\n"
-"\n"
-"Om du inte är säker på vad du ska välja, behåll det förvalda värdet."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu måste du välja vilka partitioner som ska användas för installationen av\n"
-"ditt Mandrake Linux-system. Om partitioner redan har definierats, antingen\n"
-"från en tidigare installation av GNU/Linux eller av ett annat\n"
-"partitionsverktyg, kan du använda dessa. Annars måste hårddiskpartitioner\n"
-"definieras.\n"
-"\n"
-"För att skapa partitioner måste du först välja en hårddisk. Du kan välja\n"
-"disken som ska partitioneras genom att klicka på \"hda\" för den första\n"
-"IDE-disken, \"hdb\" för den andra, \"sda\" för den första SCSI-disken\n"
-"och så vidare.\n"
-"\n"
-"För att partitionera den valda disken kan du använda dessa alternativ:\n"
-"\n"
-" * \"Nollställ\": det här alternativet tar bort alla partitioner på\n"
-"den valda hårddisken.\n"
-"\n"
-" * \"Allokera automatiskt\": det här alternativet låter dig automatiskt\n"
-"skapa Ext2- och växlingspartitioner på det lediga utrymmet på hårddisken.\n"
-"\n"
-" * \"Mer\": ger tillgång till ytterligare funktioner:\n"
-"\n"
-" * \"Spara partitionstabell\": sparar partitionstabellen på diskett. "
-"Användbart\n"
-"för eventuell framtida återskapning av partitionstabell. Det rekommenderas\n"
-"starkt att du utför detta steg.\n"
-"\n"
-" * \"Återskapa partitionstabell\": tillåter återskapning av "
-"partitionstabell\n"
-"som sparats på diskett.\n"
-"\n"
-" * \"Rädda partitionstabell\": om din partitionstabell är skadad, kan du\n"
-"försöka reparera den med detta alternativ. Var försiktig och ha i åtanke\n"
-"att det kan misslyckas.\n"
-"\n"
-" * \"Ladda om partitionstabell\": glömmer alla ändringar och laddar din\n"
-"ursprungliga partitionstabell.\n"
-"\n"
-" * \"Automatisk montering av flyttningsbar media\": avmarkering av detta\n"
-"alternativ tvingar användarna att montera och avmontera flyttbar media\n"
-"såsom disketter och cd-skivor.\n"
-"\n"
-" * \"Guide\": använd det här alternativet om du vill använda en guide för\n"
-"att partitionera hårddisken. Det rekommenderas om du inte har god kunskap\n"
-"om partitionering.\n"
-"\n"
-" * \"Ångra\": välj detta för att ångra dina ändringar.\n"
-"\n"
-" * \"Byt till normal/expertläge\": tillåter ytterligare åtgärder för "
-"partitionering\n"
-"(Typ, alternativ, format) och ger mer information.\n"
-"\n"
-" * \"Färdig\": när du har partitionerat klart hårddisken, kommer detta\n"
-"att spara ändringarna till disk.\n"
-"\n"
-"Observera: du kan hoppa till vilket alternativ som helst med tangentbordet.\n"
-"Navigera genom partitionerna med tangenten tabb och upp- och nerpilarna.\n"
-"\n"
-"När en partition är vald kan du använda:\n"
-"\n"
-" * Ctrl-c för att skapa en ny partition (när en tom partition är vald).\n"
-"\n"
-" * Ctrl-d för att ta bort en partition;\n"
-"\n"
-" * Ctrl-m för att ange monteringspunkten.\n"
-"\n"
-"För att få information om de olika typerna av filsystem, läs kapitlet\n"
-"ext2fs i \"Reference Manual\".\n"
-"\n"
-"Om du installerar på en PPC-maskin bör du skapa en en liten HFS-\n"
-"partition (\"bootstrap\") på åtminstone 1 MB. Den kommer att användas av\n"
-"starthanteraren Yaboot. Om du gör partitionen lite större, t.ex. 50 MB,\n"
-"har du ett bra ställe att lagra en reservkärna och ramdiskar för nödlägen."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Fler än en Microsoft Windows-partition har hittats på hårddisken.\n"
-"Välj vilken av dem du vill ändra storlek på för att kunna installera ditt\n"
-"nya operativsystem Mandrake Linux.\n"
-"\n"
-"Varje partition listas som följer: \"Linux-namn\", \"Windows-namn\"\n"
-"\"Kapacitet\".\n"
-"\n"
-"\"Linux-namn\" är strukturerad på följande vis: \"hårddisktyp\", "
-"\"hårddisknummer\",\n"
-"\"partitionsnummer\" (till exempel, \"hda1\").\n"
-"\n"
-"\"Hårddisktyp\" är \"hd\" om din hårddisk är en IDE-hårddisk och\n"
-"\"sd\" om det är en SCSI-hårddisk.\n"
-"\n"
-"\"Hårddisknummer\" är alltid en bokstav efter \"hd\" eller \"sd\". Med IDE-\n"
-"hårddiskar:\n"
-"\n"
-" * \"a\" betyder \"master-hårddisk på den primära IDE-kontrollern\",\n"
-"\n"
-" * \"b\" betyder \"slavhårddisk på den primära IDE-kontrollern\",\n"
-"\n"
-" * \"c\" betyder \"master-hårddisk på den sekundära IDE-kontrollern\",\n"
-"\n"
-" * \"d\" betyder \"slavhårddisk på den sekundära IDE-kontrollern\".\n"
-"\n"
-"Med SCSI-hårddiskar, betyder \"a\" \"lägsta SCSI-ID\", ett \"b\" betyder\n"
-"\"andra lägsta SCSI-ID\", etc.\n"
-"\n"
-"\"Windows-namn\" är bokstaven på din hårddisk under Windows (den första\n"
-"disken eller partitionen kallas \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Vänta. Den här operationen kan ta flera minuter."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX behöver nu veta om du vill genomföra en standardinstallation\n"
-"(\"Rekommenderad\") eller om du vill ha större kontroll (\"Expert\").\n"
-"Du har också valet mellan en ny installation eller en uppgradering av\n"
-"befintligt Mandrake Linux-system.\n"
-"\n"
-" * \"Installera\" Rensar bort det gamla systemet helt. Faktum är att\n"
-"beroende på hur ditt nuvarande system ser ut, kan du behålla en del gamla\n"
-"partitioner (Linux eller andra) orörda.\n"
-"\n"
-" * \"Uppdatera\" Denna typ av installation låter dig uppdatera paketen\n"
-"som finns i ditt nuvarande Mandrake Linux-system. Den behåller de "
-"partitioner\n"
-"som du har på hårddisken och även dina användarinställningar. Alla andra\n"
-"konfigurationssteg finns kvar som vid vanlig installation.\n"
-"\n"
-" * \"Uppdatera endast paket\" Denna helt nya installationsklass låter dig\n"
-"uppdatera ett befintligt Mandrake Linux-system och samtidigt behålla\n"
-"samtliga dina systeminställningar. Det går också att lägga till nya paket.\n"
-"\n"
-"Uppdateringar ska fungera fint för Mandrake Linux 8.1 och uppåt.\n"
-"\n"
-"Baserat på din kunskap om GNU/Linux kan du välja en av följande nivåer:\n"
-" * Rekommenderad: välj detta om du aldrig tidigare har installerat ett GNU/"
-"Linux-\n"
-"system. Installationen blir väldigt enkel och du får enbart ett fåtal "
-"frågor.\n"
-"\n"
-" * Expert: om du har god kunskap om GNU/Linux kan du välja denna\n"
-"installationsklass. Expert-installationen låter dig utföra en mycket\n"
-"anpassad installation. En del frågor kan vara svåra om du inte har god "
-"kunskap\n"
-"om GNU/Linux. Välj inte denna installationsklass om du känner dig osäker."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"I de flesta fall väljer DrakX rätt tangentbord åt dig (beroende på vilket\n"
-"språk du har valt) och det hela sker automatiskt. Men det kan hända\n"
-"att du har ett tangentbord som inte helt motsvarar ditt språk: om du\n"
-"till exempel är en engelsktalande schweizare kanske du ändå vill att\n"
-"ditt tangentbord är schweiziskt. Eller om du talar engelska och bor i\n"
-"Quebec kan du befinna dig i en liknande situation. I båda fallen behöver\n"
-"du gå tillbaka till detta installationssteg och välja önskat tangentbord\n"
-"ur listan.\n"
-"\n"
-"Klicka på Mer för en komplett lista över tillgängliga tangentbord."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Välj det språk du önskar använda för installation och systemanvändning.\n"
-"\n"
-"Om du klickar på Avancerat kan du välja andra språk som du vill\n"
-"ha installerade på datorn. Genom att välja andra språk så kommer\n"
-"språkspecifika filer för systemdokumentation och program att installeras.\n"
-"Om du till exempel får besök av personer från Spanien som behöver använda\n"
-"din dator, välj Engelska som huvudspråket i trädvyn, och under den\n"
-"avancerade sektionen, klicka på den gråa stjärnan som motsvarar\n"
-"\"Spanska|Spanien\".\n"
-"\n"
-"Observera att flera språk kan installeras. Så fort du har valt alla\n"
-"ytterligare språk, klicka på Ok för att fortsätta."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Som standard antar DrakX att du har mus med två knappar och kommer att\n"
-"ställa in den för knapp 3-emulering. DrakX kommer automatiskt att veta\n"
-"om musen är av typ PS/2, seriell eller USB.\n"
-"\n"
-"Om du vill specificera en annan mustyp välj då den i listan\n"
-"som visas.\n"
-"\n"
-"Om du väljer en annan mus än den förvalda kommer en testskärm att\n"
-"visas. Använd musknapparna och hjulet för att verifiera att inställningarna\n"
-"är korrekt. Om musen inte fungerar ordentligt tryck på mellanslag eller\n"
-"Enter för att avbryta och välja igen."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Välj den korrekta porten. Som exempel: porten som kallas \"COM1\" i\n"
-"Windows heter \"ttyS0\" i GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Det här är det viktigaste steget för säkerheten i ditt GNU/Linux-system:\n"
-"du ska ange \"root\"-lösenordet. \"root\" är systemets administratör och\n"
-"den enda som har rättigheter att göra uppdateringar, lägga till användare,\n"
-"ändra på systemets övergripande konfiguration, osv. Kort sagt, \"root\" kan\n"
-"göra allt! Därför måste du välja ett lösenord som är svårt att lista ut - \n"
-"DrakX talar om för dig om du väljer ett lösenord som är för lätt. Som du\n"
-"ser har du möjlighet att inte ange något lösenord alls, men vi avråder från\n"
-"det, om bara för att även om du kör GNU/Linux kan du ha andra\n"
-"operativsystem som begår misstag. Eftersom \"root\" kan gå förbi alla\n"
-"begränsningar och oavsiktligt radera all data på partitioner, kan de\n"
-"manipulera med partitionerna själva på ett oförsiktigt sätt, därför är\n"
-"det viktigt att det är svårt att bli \"root\".\n"
-"\n"
-"Lösenordet ska vara en blandning av numeriska tecken och bokstäver och\n"
-"minst åtta tecken långt. Skriv aldrig ner \"root\"-lösenordet - det\n"
-"ökar risken för ett intrång i systemet.\n"
-"\n"
-"Gör dock inte lösenordet för långt och komplicerat, för du måste\n"
-"kunna komma ihåg det utan allt för mycket besvär.\n"
-"\n"
-"Lösenordet visas inte på skärmen när du skriver in det. Det är därför\n"
-"du får skriva det två gånger, för att undvika att du skriver fel. Om du\n"
-"gör samma skrivfel två gånger behöver du använda detta \"felaktiga\"\n"
-"lösenord första gången du loggar in.\n"
-"\n"
-"I expertläget får du frågan om du vill ansluta mot en autentiseringsserver,\n"
-"exempelvis NIS eller LDAP.\n"
-"\n"
-"Om ditt nätverk använder LDAP (eller NIS) för autentisering, välj\n"
-"\"LDAP\" (eller \"NIS\") som autentisering. Om du är osäker, fråga\n"
-"din nätverksadministratör.\n"
-"\n"
-"Om din dator inte är ansluten till något administrerat nätverk uppmanas du\n"
-"att välja \"Lokala filer\" som autentisering."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO och Grub är starthanterare för GNU/Linux. Det här steget är\n"
-"vanligtvis helt automatiskt. DrakX analyserar startsektorn på\n"
-"disken och uppträder lite olika beroende på vad den hittar där:\n"
-"\n"
-" * om en startsektor tillhörande Windows hittas kommer den att ersättas\n"
-"med grub/LILO. På så sätt kan du välja mellan GNU/Linux och andra OS\n"
-"när du startar datorn.\n"
-"\n"
-" * om en grub- eller LILO-startsektor hittas, kommer den att ersättas med "
-"en\n"
-"ny.\n"
-"\n"
-"Vid tveksamheter kommer DrakX att visa en dialogruta med diverse "
-"alternativ.\n"
-"\n"
-" * \"Starthanterare som ska användas\": du har tre val:\n"
-"\n"
-"    * \"Grub\": om du föredrar Grub (textbaserad meny).\n"
-"\n"
-"    * \"LILO med grafisk meny\": om du föredrar Lilo med grafiskt\n"
-"gränssnitt.\n"
-"\n"
-"    * \"LILO med textbaserad meny\": om du föredrar LILO med textbaserad "
-"meny.\n"
-"\n"
-" * \"Startenhet\": i de flesta fall behöver du inte ändra det förvalda\n"
-"(\"/dev/hda\"), men om du föredrar kan starthanteraren installeras på\n"
-"andra hårddisken (\"/dev/hdb\") eller till och med på diskett (\"/dev/fd0"
-"\").\n"
-"\n"
-" * \"Fördröjning innan förvald avbild startar\": vid omstart av datorn är\n"
-"detta tiden som användaren har på sig att välja ett annat värde än det\n"
-"förvalda i starthanterarens meny.\n"
-"\n"
-"Obs! Om du väljer att inte installera någon starthanterare (genom att välja\n"
-"\"Avbryt\") måste du se till att du kan starta ditt Mandrake Linux-system\n"
-"på något annat sätt! Om du inte känner dig säker, ändra inte på några\n"
-"alternativ!\n"
-"\n"
-"Om du klickar på Avancerat i den här dialogrutan kommer du att\n"
-"erbjudas många avancerade alternativ, reserverade för expertanvändaren.\n"
-"\n"
-"Efter att du har konfigurerat de generella parametrarna för starthanteraren\n"
-"får du se de olika startalternativen som kommer att finnas vid uppstart.\n"
-"\n"
-"Om det finns något annat operativsystem installerat på datorn kommer det\n"
-"att automatiskt läggas till startmenyn. Här kan du välja att finjustera\n"
-"de existerande alternativen. Välj ett startalternativ och klicka på \"Ändra"
-"\"\n"
-"för att ändra eller ta bort. \"Lägg till\" skapar ett nytt startalternativ "
-"och\n"
-"\"Färdig\" tar dig till nästa installationssteg."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Linux Loader) och grub är starthanterare: de kan starta\n"
-"antingen GNU/Linux eller något annat operativsystem som finns\n"
-"på datorn. Vanligtvis hittas och installeras dessa andra\n"
-"operativsystem automatiskt. Om så inte är fallet kan du lägga till\n"
-"en post manuellt i den här rutan. Var försiktig så att du inte\n"
-"väljer felaktiga parametrar.\n"
-"\n"
-"Du kanske inte vill att någon annan ska få åtkomst till dessa andra\n"
-"operativsystem. Om så är fallet kan du ta bort de motsvarande posterna.\n"
-"Men om du gör det, måste du använda en startdiskett för att kunna starta\n"
-"dessa operativsystem!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Du måste indikera var du vill placera informationen som krävs för att\n"
-"starta GNU/Linux.\n"
-"\n"
-"Om du inte vet exakt vad du gör, välj \"Första sektorn på enheten\n"
-"(MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Här väljer du vilket skrivarsystem du ska använda. Andra operativsystem\n"
-"erbjuder dig kanske bara ett, men Mandrake erbjuder dig tre.\n"
-"\n"
-" * \"pdq\" - vilket betyder \"print, don't queue\", är det du ska välja om\n"
-"du har en direkt anslutning till din skrivare och vill ha möjligheten att\n"
-"stoppa utskrifter och om du inte har några nätverksskrivare. Pdq hanterar\n"
-"bara enkla nätverksfall och är ganska långsamt över nätverk. Välj\n"
-"\"pdq\" om GNU/Linux är nytt för dig. Du kan alltid ändra dig efter\n"
-"installationen genom att använda Printerdrake i Mandrakes kontrollcentral,\n"
-"och där klicka på knappen Expert.\n"
-"\n"
-" * \"CUPS\"\"Common Unix Printing System\" är mycket bra på att skriva\n"
-"ut till lokala skrivare och till skrivare på andra sidan jorden. Det är "
-"enkelt och kan\n"
-"agera som en server eller klient för det gamla skrivarsystemet \"lpd\", det\n"
-"är alltså kompatibelt med gamla skrivarsystem. CUPS kan utföra mångra "
-"tricks,\n"
-"men den grundläggande installationen är nästan lika enkel som med \"pdq\". "
-"Om\n"
-"du ska använda CUPS för att emulera en \"lpd\"-server måste du aktivera\n"
-"demonen \"cups-lpd\". CUPS har grafiska gränssnitt för utskrift och för att\n"
-"välja olika utskriftsalternativ.\n"
-"\n"
-" * \"lprNG\" - \"line printer daemon New Generation\". Det här systemet kan\n"
-"göra ungefär allt som de andra kan, men det kan också skriva ut till\n"
-"skrivare i Novell-nätverk eftersom det stödjer IPX-protokollet.\n"
-"Det kan också skriva ut direkt till skalkommandon. Om du behöver stöd för\n"
-"Novell eller för att skriva ut direkt till kommandon, utan att använda en\n"
-"separat rörkonstruktion, använd då lprNG.\n"
-"Annars rekommenderas CUPS eftersom det är enklare och har bättre stöd för\n"
-"nätverk."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX letar nu efter IDE-enheter i datorn. DrakX kommer också att\n"
-"leta efter PCI SCSI-kort på ditt system. Om DrakX hittar ett SCSI-kort\n"
-"och känner till rätt drivrutin, kommer kortet att installeras automatiskt.\n"
-"\n"
-"Om du har något SCSI-kort som DrakX inte hittar, kommer du i alla fall att\n"
-"få frågan om det finns något PCI SCSI-kort i ditt system. Om det inte finns\n"
-"något kort kan du klicka på Nej. Om du klickar Ja kommer en lista\n"
-"med kort att presenteras, från vilken du kan välja ditt specifika kort.\n"
-"Om du är osäker kan du markera \"Visa hårdvaruinformation\" och klicka\n"
-"Ok så visas en lista över vilken hårdvara som hittats i datorn.\n"
-"Undersök listan med hårdvara och klicka sedan på Ok för att\n"
-"återgå till SCSI-gränssnittsfrågan.\n"
-"\n"
-"Om du blir tvungen att manuellt specificera ditt kort kommer DrakX att\n"
-"fråga om du vill ange alternativ för det. Du bör tillåta DrakX att själv\n"
-"undersöka hårdvaran efter alternativ. Detta fungerar oftast bra.\n"
-"\n"
-"Om inte, kommer du att behöva ange alternativ för drivrutinen. Se \"User\n"
-"Guide\" (kapitel 3, avsnittet \"Collective informations on your hardware\")\n"
-"för tips om hur du får tag på information från hårdvarudokumentation,\n"
-"tillverkarens hemsida (om du har tillgång till Internet) eller från\n"
-"Microsoft Windows (om du har det på ditt system)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan lägga till ytterligare alternativ för yaboot, antingen för andra\n"
-"operativsystem, alternativa kärnor, eller startavbilder för nödsituationer.\n"
-"\n"
-"För andra operativsystem består alternativet bara av en etikett\n"
-"och rotpartitionen.\n"
-"\n"
-"För Linux finns det några olika alternativ:\n"
-"\n"
-" * Etikett: helt enkelt namnet som du behöver skriva vid yaboot-prompten\n"
-"för att välja detta startalternativ.\n"
-"\n"
-" * Avbild: namnet på kärnan du vill starta. Vanligtvis vmlinux\n"
-"eller en variant på vmlinux med ett tillägg.\n"
-"\n"
-" * Rot: rotenheten eller \"/\" för din Linux-installation.\n"
-"\n"
-"* Lägg till: med Apple-hårdvara används tilläggsalternativ för kärnan "
-"ganska\n"
-"ofta för att initialisera videohårdvara, eller för att aktivera "
-"musemulering\n"
-"med tangentbordet eftersom andra och tredje musknappen ofta saknas på en\n"
-"standardmus från Apple. Några exempel:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: detta alternativ kan användas antingen för att ladda moduler,\n"
-"innan startenheten är tillgänglig, eller för att ladda en ramdiskavbild\n"
-"vid krissituationer.\n"
-"\n"
-" * Initrd-storlek: standardstorleken på ramdisken är vanligtvis 4096 byte.\n"
-"Om du behöver allokera en större ramdisk, använd detta alternativ.\n"
-"\n"
-" * Läs-skriv: vanligtvis startar rotpartitionen i skrivskyddat läge\n"
-"för att tillåta en filsystemskontroll innan systemet startar på \"riktigt"
-"\".\n"
-"Här kan du gå runt denna funktion.\n"
-"\n"
-" * NoVideo: skulle Apple-videohårdvaran vara extra krånglig kan du välja\n"
-"detta \"novideo\"-läge, med framebuffer-stöd.\n"
-"\n"
-" * Default: vad som ska vara Linux standardalternativ, det som väljs bara\n"
-"genom att trycka Enter vid yaboot-prompten. Det blir också markerat med en\n"
-"\"*\" om du trycker tabb för att se startalternativen."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot är en starthanterare för NewWorld MacIntosh-hårdvara. Den kan ladda\n"
-"antingen GNU/Linux, MacOS eller MacOSX. I de flesta fall blir dessa\n"
-"operativsystem korrekt identifierade och installerade. Om så inte är\n"
-"fallet kan du lägga till dem manuellt här. Var försiktig så du väljer rätt\n"
-"parametrar.\n"
-"\n"
-"Yaboots huvudalternativ är:\n"
-"\n"
-" * Init Message: ett enkelt textmeddelande som visas före startprompten.\n"
-"\n"
-" * Boot Device: indikerar var du vill placera informationen som behövs\n"
-"för att starta GNU/Linux. Vanligtvis sätter man upp en \"bootstrap\"-\n"
-"partition tidigare för att lagra denna information.\n"
-"\n"
-" * Open Firmware Delay: till skillnad från LILO finns det två fördröjningar\n"
-"i yaboot. Första fördröjningen räknas i sekunder och vid detta tillfälle\n"
-"kan du välja mellan cd, OF-start, MacOS eller Linux.\n"
-"\n"
-" * Kernel Boot Timeout: denna tidsgräns motsvarar fördröjningen i LILO.\n"
-"Efter att du valt Linux kommer en fördröjning på 0.1 sekunder innan din\n"
-"förvalda kärna väljs.\n"
-"\n"
-" * Enable CD Boot?: genom att välja detta alternativ kan du välja \"C\" för\n"
-"cd vid första startprompten.\n"
-"\n"
-" * Enable OF Boot?: genom att välja detta alternativ kan du välja \"N\" för\n"
-"\"Open Firmware\" vid första startprompten.\n"
-"\n"
-"* Default OS: du kan välja vilket OS som ska starta som standard när\n"
-"\"Open Firmware\"-fördröjningen är över."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Här presenteras olika parametrar rörande din dator. Beroende på\n"
-"installerad hårdvara ser du alla eller några av följande poster:\n"
-"\n"
-" * \"Mus\": kontrollera din muskonfiguration och om nödvändigt klicka\n"
-"på knappen för att ändra.\n"
-"\n"
-" * \"Tangentbord\": kontrollera din tangentbordsuppsättning och om\n"
-"nödvändigt klicka på knappen för att ändra.\n"
-"\n"
-" * \"Tidszon\": DrakX antar vilken tidszon du har, utifrån det\n"
-"språk du har valt. Men här gäller samma sak som vid val av tangentbord,\n"
-"du kanske inte befinner dig i det land som motsvarar det språk du har valt.\n"
-"Därför kan du behöva klicka på Tidszon för att anpassa\n"
-"klockan efter din tidszon.\n"
-"\n"
-" * \"Skrivare\": om du klickar på \"Ingen skrivare\" startar skrivarguiden.\n"
-"\n"
-" * \"Ljudkort\": om ett ljudkort upptäcks i datorn visas det här.\n"
-"Ingen ändring är möjlig under installationen.\n"
-"\n"
-" * \"TV-kort\": om ett TV-kort upptäcks i datorn visas det här.\n"
-"Ingen ändring är möjlig under installationen.\n"
-"\n"
-" * \"ISDN-kort\": om ett ISDN-kort upptäcks i datorn visas det här.\n"
-"Du kan klicka på knappen för att ändra dess parametrar."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Välj vilken hårddisk du vill radera för att kunna installera din nya\n"
-"Mandrake Linux-partition. Var försiktig, all data som för tillfället\n"
-"finns på disken kommer att gå förlorad och kommer inte att kunna återställas!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klicka på Ok om du vill ta bort all data och alla partitioner som\n"
-"finns på denna hårddisk. Var försiktig, efter det att du klickat på Ok\n"
-"kommer du inte att kunna återställa någon data eller några partitioner på\n"
-"denna hårddisk, inkluderande Windows-data.\n"
-"\n"
-"Klicka på Avbryt för att avbryta denna operation utan att förlora någon\n"
-"data eller några partitioner på denna hårddisk."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kan inte hitta kärnmodulerna som motsvarar din kärna (%s saknas), det beror "
-"för det mesta på att startdisketten inte är i synk med installationsmediat "
-"(skapa en nyare startdiskett)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Du måste också formatera %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Du har valt följande server/servrar: %s\n"
-"\n"
-"\n"
-"Dessa startas automatiskt vid uppstart. De har inga kända säkerhetsproblem,\n"
-"men sådana kan upptäckas. Om så blir fallet måste du se till att uppdatera\n"
-"dem så snabbt som möjligt.\n"
-"\n"
-"\n"
-"Vill du installera dessa servrar?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan inte använda broadcast utan NIS-domän."
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sätt in en FAT-formaterad diskett i diskettstationen %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Denna diskett är inte FAT-formaterad"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"För att använda detta sparade paketval, starta installationen med \"linux "
-"defcfg=floppy\"."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fel vid läsning av fil %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"En del hårdvara i din dator behöver \"proprietära\" drivrutiner för att\n"
-"fungera. Du kan hitta en del information om dem här: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du måste ha en rotpartition.\n"
-"För detta, skapa en partition (eller klicka på en befintlig).\n"
-"Välj sedan åtgärden \"monteringspunkt\" och ange den som \"/\"."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Du måste ha en växlingspartition"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen växlingspartition.\n"
-"\n"
-"Fortsätta ändå?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du måste ha en FAT-partition monterad i /boot/efi."
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Använd ledigt utrymme"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Inte tillräckligt med utrymme för att allokera nya partitioner."
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Använd existerande partition"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Det finns ingen befintlig partition att använda."
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Använd Windows-partitionen för loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Vilken partition vill du använda för Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Välj storlekar"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Storleken på rotpartitionen i MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Storleken på växlingspartitionen i MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Använd ledigt utrymme på Windows-partitionen"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Vilken partition vill du ändra storlek på?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Räknar ut gränserna för Windows filsystem"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Det gick inte att ändra storlek på FAT-partitionen, \n"
-"följande fel uppstod: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Din Windows-partition är för fragmenterad, kör \"Defrag\" först."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VARNING!\n"
-"\n"
-"DrakX kommer nu att ändra storleken på Windows-partitionen.\n"
-"Var försiktig: detta moment är riskfyllt. Om du inte redan gjort\n"
-"det, ska du först avsluta installationen och köra Scandisk i Windows\n"
-"(och möjligtvis även Defrag), starta sedan installationen på nytt.\n"
-"Du bör också säkerhetskopiera dina data.\n"
-"När du är säker, klicka Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Vilken storlek vill du behålla för Windows på"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-storleksändring misslyckades: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Det finns ingen FAT-partition att ändra storlek på eller använda som "
-"loopback (eller ej tillräckligt utrymme)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Rensa hela hårddisken"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ta bort Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mer än en hårddisk, vilken vill du installera Linux på?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Alla existerande partitioner på %s och dess data kommer att gå förlorade."
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Anpassad diskpartitionering"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Använd fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan nu partitionera %s.\n"
-"Glöm inte att spara med \"w\" när du är klar."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har inte tillräckligt med utrymme på din Windows-partition."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Jag kan inte hitta utrymme för installation."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakXs partitioneringsguide hittade följande lösningar:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering misslyckades: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Startar nätverket"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Stoppar nätverket"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ett fel uppstod och jag vet inte hur det kan hanteras på ett\n"
-"bra sätt. Fortsätt på egen risk."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplicera monteringspunkt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Några viktiga paket blev inte installerade ordentligt.\n"
-"Antingen är cd-enheten eller cd-skivan trasig.\n"
-"Du kan kontrollera cd-skivan på en redan installerad\n"
-"Mandrake Linux-dator med kommandot \"rpm -qpl Mandrake/RPMS/*.rpm\".\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Välkommen till %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ingen diskettstation tillgänglig"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Påbörjar steg \"%s\"\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ditt system har ont om resurser. Du kan få problem med att installera\n"
-"Mandrake Linux. Om det blir problem kan du prova den textbaserade\n"
-"installationen istället. För att göra det tryck F1 när du startar\n"
-"från cd-skivan, skriv sedan \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installationsklass"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Välj en av de följande installationsklasserna:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totala storleken för de grupper du har valt är ungefär %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Om du vill installera mindre än detta, välj då hur stor del av\n"
-"paketen du vill installera. Vid en låg andel kommer endast de\n"
-"viktigaste paketen att installeras. Om du väljer 100%%, kommer alla\n"
-"valda paket att installeras."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Endast %d%% av de valda paketen får plats på hårddisken.\n"
-"Om du vill installera mindre än detta, välj då hur stor del av\n"
-"paketen du vill installera. Vid en låg andel kommer endast de\n"
-"viktigaste paketen att installeras. Om du väljer %d%%, kommer så\n"
-"många paket som möjligt att installeras."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Du kommer att få välja exakt vilka paket som ska installeras i nästa steg."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Andel (i procent) av paketen som ska installeras"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Val av paketgrupper"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Välj enskilda paket"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total storlek: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Ogiltigt paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Namn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Storlek: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Betydelsegrad: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan inte välja detta paket eftersom det inte finns tillräckligt med "
-"utrymme."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Följande paket kommer att installeras"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Följande paket kommer att tas bort"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Du kan inte välja/välja bort detta paket."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Detta är ett obligatoriskt paket som inte kan väljas bort."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan inte välja bort detta paket. Det är redan installerat."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Detta paketet måste uppdateras.\n"
-"Är du säker på att du vill välja bort det?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan inte välja bort det här paketet. Det måste uppdateras."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Visa automatiskt valda paket"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installera"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Ladda/spara på diskett"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Uppdaterar paketval"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal installation"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Välj paketen som du vill installera"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installerar"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Uppskattar"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Återstående tid "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Vänta, förbereder installation"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerar paketet %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepterar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Vägrar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Byt cd-skiva.\n"
-"\n"
-"Sätt in cd-skivan med namn \"%s\" och klicka på Ok.\n"
-"Om du inte har den, klicka på Avbryt för att hoppa över\n"
-"den delen av installationen."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Fortsätta ändå?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Det uppstod ett fel vid sortering av paket:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Det uppstod ett fel vid installation av paketen:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varning\n"
-"\n"
-"Läs reglerna nedan noga. Om du inte godkänner dem, får du\n"
-"inte installera program från nästa cd. Klicka på Vägrar för att\n"
-"fortsätta installationen utan programmen från nästa cd.\n"
-"\n"
-"\n"
-"Några av komponenterna på nästa cd är inte licensierade under GPL\n"
-"eller någon liknande licens. Varje sådan komponent är i stället\n"
-"licensierad under sitt eget licensavtal. Läs och godkänn varje\n"
-"enskild sådan licens före användning eller distribuering av dessa\n"
-"komponenter. De flesta av dessa licenser förbjuder överföring,\n"
-"kopiering (utom för backupendamål), distribuering samt modifiering av\n"
-"komponenten. Alla brott mot reglerna under någon av dessa licenser,\n"
-"förverkar omedelbart dina rättigheter under licensen i fråga. Utom i\n"
-"de fall licensen för en komponent uttryckligen ger dig den rättigheten,\n"
-"får du inte installera komponenten på mer än ett system, eller för\n"
-"användning på ett nätverk. Om du är osäker, kontakta\n"
-"tillverkaren av komponenten i fråga. Kopiering till tredje part av\n"
-"sådana komponenter, inkluderat deras dokumentation, är normalt sett\n"
-"förbjuden.\n"
-"\n"
-"\n"
-"Alla rättigheter till komponenterna på nästa cd tillhör deras\n"
-"respektive upphovsmän, och är skyddade av\n"
-"imaterialrätt/copyright-lagstiftning som kan appliceras på mjukvara.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ett fel inträffade"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Vill du verkligen lämna installationen?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licensavtal"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Detta är en inofficiell översättning av licensavtalet för\n"
-"Linux Mandrake. Denna text bestämmer inte reglerna för mjukvara i\n"
-"denna distribution - endast den franska originaltexten för\n"
-"Linux Mandrake-licensen gör det. Denna text tillhandahålls för att\n"
-"hjälpa dig som svensktalande att förstå licensen bättre.\n"
-"\n"
-"\n"
-"Introduktion\n"
-"\n"
-" Hädanefter avses med beteckningen \"Mjukvaruprodukter\",\n"
-"operativsystemet, samt de olika komponenter som ingår i\n"
-"Mandrake Linux-distributionen. Mjukvaruprodukterna inkluderar, men är\n"
-"inte begränsade till, programmen, metoderna, reglerna och\n"
-"dokumentationen relaterade till operativsystemet och de olika\n"
-"komponenterna i Mandrake Linux-distributionen.\n"
-"\n"
-"\n"
-"1. Licens\n"
-"\n"
-" Läs denna text noggrant. Den är en licensavtal mellan dig\n"
-"och MandrakeSoft S.A., gällande mjukvaruprodukterna. Genom att\n"
-"installera, kopiera, eller använda mjukvaruprodukterna på något sätt,\n"
-"accepterar du detta avtal, och godkänner att rätta dig efter dess\n"
-"regler.\n"
-" Genom att installera, kopiera eller använda mjukvaruprodukterna på\n"
-"något sätt som inte tillåts enligt detta avtal, har du brutit avtalet,\n"
-"som då upphör, och därigenom förverkat alla de rättigheter det ger\n"
-"dig. Skulle avtalet upphöra, måste du omedelbart förstöra alla kopior\n"
-"av mjukvaruprodukten.\n"
-"\n"
-"\n"
-"2. Begränsad garanti\n"
-"\n"
-" Mjukvaruprodukten och medföljande dokumentation tillhandahålls \"som\n"
-"den är\", utan någon som helst garanti, endast begränsat av vad lagen\n"
-"kräver. MandrakeSoft S.A. ska, under inga omständigheter, till den\n"
-"grad lagen tillåter det, hållas ansvariga för olycks-, direkt eller\n"
-"indirekt skada (bland annat, men inte begränsat till, minskad\n"
-"försäljning, drifts-/affärs-avbrott, finansiella förluster,\n"
-"rättsavgifter och böter i en rättsprocess mot er, eller några andra\n"
-"därav följande förluster) som orsakats av användandet, eller oförmågan\n"
-"att använda mjukvaruprodukten, även om MandrakeSoft S.A. skulle ha\n"
-"vetskap möjligheten av en sådan händelse.\n"
-"\n"
-"BEGRÄNSAT ANSVAR GÄLLANDE ÄGANDET ELLER ANVÄNDANDET AV PROGRAMVARA FÖRBJUDEN "
-"I VISSA LÄNDER\n"
-"\n"
-" MandrakeSoft S.A. ska, under inga omständigheter, till den grad\n"
-"lagen tillåter det, hållas ansvariga för olycks-, direkt eller\n"
-"indirekt skada (bland annat, men inte begränsat till, minskad\n"
-"försäljning, drifts-/affärs-avbrott, finansiella förluster,\n"
-"rättsavgifter och böter i en rättsprocess mot er, eller några andra\n"
-"därav följande förluster) som orsakats av ägandet, användandet eller\n"
-"nedladdandet, från någon av Mandrake Linuxs siter, av\n"
-"mjukvarukomponenter som är förbjudna eller begränsade av landets\n"
-"lagar. Detta begränsade ansvar gäller bland annat, men är inte\n"
-"begränsat till, det kryptografiska mjukvarukomponenter som ingår i\n"
-"Mjukvaruprodukten.\n"
-"\n"
-"\n"
-"3. GPL och relaterade licenser\n"
-"\n"
-" Mjukvaruprodukten består av komponenter med olika upphovsmän (fysiska\n"
-"eller juridiska). De flesta av dessa komponenter distribueras under\n"
-"The GNU General Public License, hädanefter kallad \"GPL\", eller\n"
-"liknande licenser. De flesta av dessa licenser tillåter dig att\n"
-"använda, kopiera, ändra och distribuera de licensierade\n"
-"komponenterna. Läs avtalet för varje enskild komponent noga\n"
-"innan ni använder komponenten i fråga. Varje fråga angående licensen\n"
-"för en given komponent ska ställas till komponentens upphovsman,\n"
-"inte till MandrakeSoft S.A.\n"
-" Program skrivna av MandrakeSoft S.A. distribueras under GPL.\n"
-" Dokumentation skriven av MandrakeSoft S.A. distribueras under en\n"
-"speciell licens. Se dokumentationen för detaljer.\n"
-"\n"
-"\n"
-"4. Upphovsrätt\n"
-"\n"
-" Alla rättigheter till Mjukvaruproduktens komponenter tillhör deras\n"
-"respektive upphovsmän och är skyddade av\n"
-"immaterialrätt/copyrightlagstiftning som kan appliceras på mjukvara.\n"
-" MandrakeSoft S.A. har rätt att ändra mjukvaruprodukten, helt eller\n"
-"delvis, på alla sätt och för alla ändamål.\n"
-" \"Mandrake\", \"Mandrake Linux\" och associerade logotyper är\n"
-"registrerade varumärken tillhörande MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Lagar\n"
-"\n"
-" Skulle någon del av detta avtal hållas olagligt, icke applicerbart\n"
-"eller ogiltigt av domstol, ska denna del exkluderas från avtalet. Ni\n"
-"fortsätter då att vara bunden av de återstående delarna av detta\n"
-"avtal.\n"
-" Detta avtals regler regleras av Frankrikes lagar.\n"
-" Alla stridigheter över reglerna i detta avtal ska i första hand\n"
-"göras upp utom domstol, och om detta ej är möjligt, inom en domstol i\n"
-"Paris, Frankrike.\n"
-" För alla frågor rörande denna text, kontakta MandrakeSoft\n"
-"S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tangentbord"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Välj tangentbordslayout."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Här är hela listan med olika tangentbord"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Vilken installationsklass vill du använda?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installera/Uppdatera"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Är detta en installation eller en uppdatering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Rekommenderad"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Uppdatera"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Uppdatera endast paket"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Välj mustyp."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Musport"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Välj vilken serieport musen är kopplad till."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Knappemulering"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Knapp 2-emulering"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Knapp 3-emulering"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerar PCMCIA-kort..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurerar IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "inga tillgängliga partitioner"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Söker av partitioner för att finna monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Välj monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Partitionstabellen kan inte läsas - den är alldeles för trasig.\n"
-"Vi kan gå vidare genom att rensa dåliga partitioner (ALL DATA försvinner!)\n"
-"Den andra lösningen är att förhindra DrakX från att ändra "
-"partitionstabellen.\n"
-"(felet är %s)\n"
-"\n"
-"Accepterar du att förlora alla partitioner?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Diskdrake misslyckades med att läsa partitionstabellen.\n"
-"Fortsätt på egen risk!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Inget ledigt utrymme för 1MB bootstrap! Installationen fortsätter, men för "
-"att starta ditt system måste du skapa en \"bootstrap\"-partition i Diskdrake."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen rotpartition hittades för uppdatering"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rotpartition"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Vad är rotpartitionen (/) i ditt system?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Du behöver starta om datorn för att ändringarna i partitionstabellen ska "
-"aktiveras."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Välj de partitioner du vill formatera"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Sök efter felaktiga block?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formaterar partitioner"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Skapar och formaterar filen %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Ej tillräckligt med växlingsutrymme för att genomföra installationen, lägg "
-"till mer."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Söker efter tillgängliga paket"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Söker efter paket att uppdatera"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ditt system har inte tillräckligt med utrymme för installation eller "
-"uppdatering (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Fullständig (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimal (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekommenderad (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Välj ladda eller spara paketval på diskett.\n"
-"Formatet är detsamma som för auto_install-genererade disketter."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Ladda från diskett"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Laddar från diskett"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Paketval"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Sätt in en diskett som innehåller ditt paketval"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Spara på diskett"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Vald storlek är större än tillgängligt utrymme."
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Installationstyp"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har inte valt några grupppaket.\n"
-"Välj den minimala installationen du vill ha."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Med X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Med grundläggande dokumentation (rekommenderas)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Minimal installation (ingen urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Om du har alla cd-skivorna i listan ovan, välj Ok.\n"
-"Om du inte har någon av dem, välj Avbryt.\n"
-"Om du bara har några av dem, se till att bara\n"
-"de du har är valda, välj sedan Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-rom med etiketten \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Förbereder installation"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerar paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Bearbetar installerade paket"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sätt in aktuell startdiskett i diskettstationen %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sätt in disketten med uppdaterade moduler i diskettstationen %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har nu möjlighet att ladda hem mjukvara för kryptering.\n"
-"\n"
-"VARNING:\n"
-"\n"
-"Beroende på olika allmänna krav tillämpningsbara på denna mjukvara och "
-"ålagda\n"
-"av olika jurisdiktioner, ska kund och/eller slutanvändare försäkra sig om "
-"att\n"
-"lagar i hennes/deras jurisdiktion tillåter henne/dem att ladda ner, lagra "
-"och/eller\n"
-"använda denna mjukvara.\n"
-"\n"
-"Dessutom ska kund och/eller slutanvändare vara extra uppmärksamma på att "
-"inte\n"
-"överträda lagar i hennes/deras jurisdiktion. Skulle kund och/eller "
-"slutanvändare inte\n"
-"respektera villkoren i dessa tillämpningsbara lagar, kommer hon/dem att ådra "
-"sig\n"
-"allvarliga sanktioner.\n"
-"\n"
-"Inte under några omständigheter ska Mandraksoft eller dess tillverkare och/"
-"eller\n"
-"leverantörer anses ansvariga för speciell, indirekt eller oförutsedd skada "
-"(inkluderat,\n"
-"men inte begränsat till förlorad inkomst, avbrott i affär, förlust av "
-"kommersiell data och\n"
-"andra pekuniära förluster och eventuellt påföljande skadestånd och kostnader "
-"i\n"
-"samband med dom i domstol) uppkomna ur användning, innehav, eller enbart\n"
-"nerladdning av denna mjukvara som kund och/eller slutanvändare kan få\n"
-" tillgång till efter att accepterat det aktuella avtalet.\n"
-"\n"
-"\n"
-"För ev. frågor relaterade till dessa avtal, kontakta \n"
-"Mandrakesoft, Inc. \n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Nu har du möjlighet att ladda hem programuppdateringar och\n"
-"säkerhetsuppdateringar som kommit ut efter att denna distribution släpptes.\n"
-"\n"
-"Du behöver en Internetanslutning för att kunna fortsätta.\n"
-"\n"
-"Vill du installera uppdateringarna?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontaktar Mandrake Linux webbplats för att hämta listan över tillgängliga "
-"speglar"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Välj en webbplats från vilken du vill hämta paketen"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktar webbplatsen för en lista över tillgängliga paket"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Vilken är din tidszon?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hårdvaruklocka ställd till GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidsynkronisering (med NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "CUPS-fjärrserver"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ingen skrivare"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Har du ett ISA-ljudkort?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Kör \"sndconfig\" efter installationen för att konfigurera ditt ljudkort"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Inget ljudkort hittades. Prova \"harddrake\" efter installationen"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sammanfattning"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tidszon"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Skrivare"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Ljudkort"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokala filer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ange root-lösenord"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Inget lösenord"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Lösenordet är för enkelt (det måste vara minst %d tecken långt)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentisering"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP-autentisering"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base DN"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS-autentisering"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-domän"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En anpassad startdiskett skapar ett sätt att starta ditt Linux-system utan\n"
-"att vara beroende av den normala starthanteraren. Det är användbart om du "
-"inte\n"
-"vill installera SILO på ditt system, eller om något annat operativsystem "
-"raderar SILO\n"
-"eller om SILO inte fungerar med din hårdvara. En anpassad startdiskett kan "
-"också\n"
-"användas i kombination med Mandrakes återskapningsavbild, vilket gör "
-"räddning\n"
-"av ett trasigt system mycket enklare.\n"
-"\n"
-"Om du vill skapa en startdiskett för ditt system, sätt in en disk i första "
-"diskett-\n"
-"stationen och klicka Ok."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Första diskettstationen"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Andra diskettstationen"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Hoppa över"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"En anpassad startdiskett skapar ett sätt att starta ditt Linux-system utan\n"
-"att vara beroende av den normala starthanteraren. Det är användbart om du\n"
-"inte vill installera Lilo (eller Grub) på ditt system, eller om något annat\n"
-"operativsystem raderar Lilo eller om Lilo inte fungerar med din hårdvara.\n"
-"En anpassad startdiskett kan också användas i kombination med Mandrakes\n"
-"återskapningsavbild, vilket gör återställningen av ett trasigt system\n"
-"mycket enklare. Vill du skapa en startdiskett för ditt system?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(VARNING! Du använder XFS på din rotpartition. Det\n"
-"kan bli problem att skapa en startdiskett eftersom XFS\n"
-"kräver en väldigt stor drivrutin)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ingen diskettstation hittades"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Välj den diskettstation du vill använda för att skapa startdisketten"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sätt in en diskett i diskettstationen %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Skapar startdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Förbereder starthanterare"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Du verkar ha en OldWorld eller okänd\n"
-" maskin, yaboot-starthanteraren kommer inte att fungera.\n"
-"Installationen fortsätter, men du behöver\n"
-" använda BootX för att starta din dator."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Vill du använda aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fel vid installationen av aboot.\n"
-"Vill du försöka ändå, fast det kan förstöra partitionen?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Installerar starthanterare"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installation av starthanteraren misslyckades. Följande fel uppstod:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du behöver eventuellt ändra din Open Firmware-startenhet för att\n"
-" aktivera starthanteraren. Om du inte ser starthanterarprompten vid\n"
-" omstart, håll ner Command-Option-O-F under uppstart och skriv:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv sedan: shut-down\n"
-"Vid nästa uppstart bör du se starthanterarprompten."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sätt in en tom diskett i diskettenhet %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Skapar automatisk installationsdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Några steg är inte slutförda.\n"
-"\n"
-"Vill du verkligen avbryta nu?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulerar! Installationen är färdig.\n"
-"Ta ur diskett och/eller cd-skiva och tryck Enter för att starta om datorn.\n"
-"\n"
-"Information om uppdateringar för denna version av Mandrake Linux hittar du "
-"på:\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information om anpassning av ditt system finns i kapitlet \"post install\" "
-"i\n"
-"boken \"Official Mandrake Linux User's Guide\"."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Genererar automatisk installationsdiskett"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automatisk installation kan göras helt automatisk, om så önskas,\n"
-"vilket gör att den tar över hårddisken!\n"
-"(syftet är att installera på en annan dator).\n"
-"\n"
-"Du kan tänkas vilja köra samma installation i repris.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatiserad"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Repris"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Spara paketval"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellan element    | <Space> väljer  | <F12> nästa skärm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu saknas"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper saknas"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Välj en fil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avancerad"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Grundläggande"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Vänta"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Information"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandera träd"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Komprimera träd"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Byt mellan rak och gruppvis sortering"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Fel val, försök igen.\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ditt val? (standard %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Alternativ du måste fylla i.\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ditt val? (0/1, standard \"%s\")"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Knapp \"%s\": %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Vill du klicka på den här knappen? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ditt val? (standard \"%s\"%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Det finns många saker att välja bland (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Välj första numret av de tio urval du vill ändra,\n"
-"eller tryck Enter för att fortsätta.\n"
-"Ditt val? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Observera, en etikett ändrades:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Skicka igen"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tjeckiskt (QWERTZ)"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Tyskt"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spanskt"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finskt"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franskt"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norskt"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polskt"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ryskt"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Svenskt"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Engelskt (UK)"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Engelskt (US)"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanskt"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeniskt (gammal)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenskt (typewriter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeniskt (fonetiskt)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgiskt"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgariskt (fonetiskt)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgariskt (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilianskt (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Vitryskt"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Schweiziskt (Tysk uppsättning)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Schweiziskt (Fransk uppsättning)"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tjeckiskt (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Tyskt (Inga döda tangenter)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danskt"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norskt)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svenskt)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estniskt"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiskt (\"Rysk\" uppsättning)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiskt (\"Latinsk\" uppsättning)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grekiskt"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungerskt"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatiskt"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeliskt"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeliskt (Fonetiskt)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranskt"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Isländskt"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italienskt"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanskt 106 tangenter"
-
-# Noteraatt de tidigare namnen, med a på slutet (t.ex. svenska) angav
-# plural. Men vad jag vet anges alltid tangentbordslaouter i singular
-# (Svenskt tangentbord, inte svenska tangentbord).
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreanskt"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinamerikanskt"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauiskt AZERTY (gamalt)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauiskt AZERTY (nytt)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauiskt \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauiskt \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettisk"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedoniskt"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holländskt"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polskt (querty-layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polskt (qwertz-layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugisiskt"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadensiskt"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumänskt (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumänskt (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ryskt (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenskt"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakiskt (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakiskt (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbiskt (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilsk"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailändskt"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkiskt (traditionell \"F\"-modell)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkisk (modern \"Q\"-modell)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainskt"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Amerikanskt (internationellt)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Litauiskt \"numerisk rad\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaviskt (latinsk)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Högra alt-tangenten"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Båda shift-tangenterna nedtryckta samtidigt"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Ctrl och shift nedtryckta samtidigt"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock-tangenten"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl och alt nedtryckta samtidigt"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt och shift nedtryckta samtidigt"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Meny\"-tangenten"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Vänstra \"Windows\"-tangenten"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Högra \"Windows\"-tangenten"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkulära monteringar %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Ta bort de logiska volymerna först\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA-stöd finns inte längre för kärnan 2.2. Välj istället kärnan 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Allmän PS2-hjulmus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1-knappars"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Allmän 2-knapparsmus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Allmänna"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriell"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Allmän 3-knapparsmus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (seriell, gammal C7-typ)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bussmus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2-knappars"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3-knappars"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ingen"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Testa musen"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "För att aktivera musen,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "SNURRA PÅ HJULET!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Slutför"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Nästa ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Föregående"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Är detta korrekt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Anslut till Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Det vanligaste sättet att koppla upp med ADSL är pppoe.\n"
-"En del anslutningar använder pptp och några få använder DHCP.\n"
-"Om du är osäker, välj \"pppoe\"."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "använd DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "använd pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "använd pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Vilken DHCP-klient vill du använda?\n"
-"Standardalternativet är dhcpcd."
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Inget Ethernet-nätverkkort har hittats i ditt system.\n"
-"Kan inte installera denna nätverkstyp."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Välj nätverksgränssnitt"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Välj vilken nätverkskort du vill använda för anslutning till Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "inget nätverkskort kunde hittas"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurera nätverket"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Ange ditt datornamn om du vet det.\n"
-"En del DHCP-servrar kräver att din dator\n"
-"har ett namn för att fungera. Ditt datornamn\n"
-"ska skrivas inklusive domännamn,\n"
-"t ex som \"mindator.mittlab.mittforetag.se\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Värddatornamn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Guiden för nätverkskonfiguration"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externt ISDN-modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Vad för slags ISDN-anslutning har du?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Vilken ISDN-konfiguration föredrar du?\n"
-"\n"
-"* Den äldre varianten använder isdn4net. Den har kraftfulla verktyg,\n"
-"  men är svår att anpassa för nybörjare och är inte standard.\n"
-"\n"
-"* Den nya varianten är lättare att förstå, mer standard, men har\n"
-"  färre verktyg.\n"
-"\n"
-"Vi rekommenderar isdn-light.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Äldre konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-konfiguration"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Välj din leverantör.\n"
-" Om den saknas i listan, välj \"Unlisted\""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protokoll för Europa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokoll för Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll för resten av världen"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll för resten av världen \n"
-" ingen D-kanal (hyrd lina)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Vilket protokoll vill du använda?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Vilket typ av kort har du?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Vet ej"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Om du har ett ISA-kort bör värdena på nästa skärm vara korrekta.\n"
-"\n"
-"Om du har ett PCMCIA-kort måste du veta IRQ och IO för ditt kort.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Avbryt"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortsätt"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Vilket är ditt ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Jag har hittat ett ISDN PCI-kort, men känner inte till modellen. Välj ett av "
-"PCI-korten på nästa skärm."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Inget ISDN PCI-kort hittat. Välj ett på nästa skärm."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ange vilken serieport ditt modem är anslutet till:"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Uppringningsalternativ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Namn på anslutningen"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Användar-ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skriptbaserad"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalbaserad"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domännamn"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primär DNS-server (frivilligt)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Sekundär DNS-server (frivilligt)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koppla ifrån eller konfigurera om anslutningen."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan konfigurera om anslutningen."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Du är för närvarande ansluten till Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan koppla upp mot Internet eller konfigurera om anslutningen."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Du är inte ansluten till Internet för närvarande."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Koppla upp"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Koppla ned"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Anpassa anslutningen"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetanslutning & konfiguration"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Kommer nu att anpassa anslutning %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Kommer nu att konfigurera anslutning %s.\n"
-"\n"
-"\n"
-"Klicka Ok för att börja."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigurera nätverk"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Eftersom du gör en nätverksinstallation är ditt nätverk redan konfigurerat.\n"
-"Klicka på Ok för att behålla konfigurationen, eller avbryt för att "
-"konfigurera om din Internet- & nätverksanslutning.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Välkommen till guiden för nätverksinstallation.\n"
-"\n"
-"Vi kommer att konfigurera din Internet/nätverksanslutning.\n"
-"Klicka bort markeringen om du inte vill använda automatisk identifiering.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Välj profil att konfigurera"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Använd automatisk identifiering"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Letar efter enheter..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normal modemuppkoppling"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "hittad på port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-uppkoppling"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "hittade %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL-anslutning"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "hittad på gränssnitt %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Anslutning med kabelmodem"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "kabelanslutning har hittats"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN-anslutning"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet-kort har hittats"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Välj den anslutning du vill konfigurera"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigurerat flera sätt att ansluta till Internet.\n"
-"Välj den du vill använda.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetanslutning"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Vill du starta din anslutning vid uppstart?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Nätverkskonfiguration"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Nätverket måste startas om"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ett fel uppstod när nätverket skulle startas om: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulerar, nätverks- och Internetkonfigurationen är klar.\n"
-"\n"
-"Konfigurationen kommer nu att läggas in i ditt system.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"När det är klart rekommenderas du att starta om din X-miljö\n"
-"för att undvika problem vid byte av värddatornamn."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Problem uppstod under konfigurationen.\n"
-"Testa anslutningen via net_monitor eller mcc. Om din anslutning inte "
-"fungerar kan du starta om konfigurationen."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VARNING: Denna enhet har tidigare varit konfigurerad för att koppla upp mot "
-"Internet.\n"
-"Genom att acceptera behåller den sin konfiguration.\n"
-"Modifiering av fälten nedan åsidosätter denna konfiguration."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Ange IP-konfigurationen för den här datorn.\n"
-"Varje adress ska skrivas som en så kallad\n"
-"dotted-quad (t ex 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerar nätverksenhet %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (drivrutin %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adress"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Nätmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Dynamisk IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adressen ska vara i formatet 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Ange ditt värddatornamn.\n"
-"Värddatornamnet ska vara ett fulltständigt datornamn,\n"
-"t ex \"mindator.mindoman.se\". Du kan också ange IP-adressen\n"
-"till en gateway om du har en sådan."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (t ex %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway-enhet"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxykonfiguration"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Spåra nätverkskortets id (användbart för bärbara datorer)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy ska vara http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ska vara ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internetkonfiguration"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Vill du ansluta till Internet nu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testar din anslutning..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Systemet är nu anslutet till Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Av säkerhetsskäl kommer den att kopplas ner nu."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Systemet verkar inte vara anslutet till Internet.\n"
-"Prova att konfigurera om anslutningen."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Anslutningskonfiguration"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Fyll i, eller kontrollera, fältet nedan"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kortets IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kortets minne (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kortets IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kortets IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kortets IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ditt personliga telefonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Leverantörens namn (t ex leverantor.se)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Leverantörens telefonnummer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Leverantörens DNS 1 (frivilligt)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Leverantörens DNS 2 (frivilligt)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Välj ditt land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Uppringningsmetod"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Anslutningshastighet"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Anslutningens tidsgräns (i sek)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kontoinloggning (användarnamn)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Kontolösenord"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montering misslyckades: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Utökade partitioner stöds inte på den här plattformen."
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Du har en lucka i partitionstabellen, men den kan inte användas.\n"
-"Den enda lösningen är att du flyttar din primära partition,\n"
-"så att den ligger bredvid den utökade partitionen."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Återställning från fil %s misslyckades: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Trasig återställningsfil"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Kunde inte skriva till fil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Det händer något dåligt med din disk. \n"
-"Ett integritetstest av data har misslyckats. \n"
-"Det betyder att skrivning till disken medför allmänt skräp."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "nödvändigt"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "viktigt"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "väldigt trevligt"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "trevligt"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "tveksamt"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - \"Print, Don't Queue\""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokal skrivare"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Nätverksskrivare"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Skrivare på CUPS-fjärrserver"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Skrivare på LPD-fjärrserver"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Nätverksskrivare (TCP/socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Skrivare på SMB/Windows-server"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Skrivare på Netware-server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Ange URI för skrivarenhet"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Skicka jobbet till kommando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Okänd modell"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokala skrivare"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Fjärrskrivare"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " på pararellport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB-skrivare \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", flerfunktionsenhet på parallellport \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", flerfunktionsenhet på USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", flerfunktionsenhet på HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", flerfunktionsenhet"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", skriver ut på %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "på LPD-server \"%s\", skrivare \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP-värd \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "på Windows-server \"%s\", utdelning \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "på Novell-server \"%s\", skrivare \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", med kommando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Rå skrivare (ingen drivrutin)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(på %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(på den här datorn)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "På CUPS-server \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Välj skrivaranslutning"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hur är skrivaren ansluten?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Skrivare på CUPS-fjärrservrar behöver du inte konfigurera här; dessa "
-"skrivare kommer att hittas automatiskt."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS-konfiguration"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Ange CUPS-server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"För att komma åt skrivare på CUPS-servrar i ditt lokala nätverk behöver du "
-"inte konfigurera någonting: CUPS-servrarna informerar din dator om skrivarna "
-"automatiskt. Alla skrivare som din dator känner till för närvarande finns "
-"listade under \"Fjärrskrivare\" i Printerdrakes huvudfönster. När din CUPS-"
-"server inte finns i ditt lokala nätverk behöver du ange CUPS-serverns IP-"
-"adress och alternativt även portnumret för att få information om skrivarna, "
-"annars lämnar du fälten tomma."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalt sätt så konfigureras CUPS automatiskt enligt din nätverksmiljö, så "
-"att du kan komma åt skrivarna på CUPS-servrarna i ditt lokala nätverk. Om "
-"det här inte fungerar, stäng av \"Automatisk konfiguration av CUPS\" och "
-"redigera filen /etc/cups/cupsd.conf manuellt. Glöm inte att starta om CUPS "
-"efter ändringarna (kommando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adressen ska vara i formatet 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Portnumret måste vara ett heltal!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-serverns IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatisk konfiguration av CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Letar efter enheter..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testar portar"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Lägg till skrivare"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Välkommen till guiden för skrivarinställning\n"
-"\n"
-"Den här guiden låter dig installera lokala eller nätverksskrivare för "
-"användning från den här datorn och/eller från andra datorer i nätverket.\n"
-"\n"
-"Den kommer att fråga dig efter informationen som krävs för att installera "
-"skrivaren och ger dig åtkomst till alla tillgängliga skrivardrivrutiner, "
-"drivrutinsinställningar och skrivaranslutningstyper."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokal skrivare"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Välkommen till guiden för skrivarinställning\n"
-"\n"
-"Den här guiden hjälper dig att installera skrivare anslutna till den här "
-"datorn.\n"
-"\n"
-"Anslut din skrivare och slå på den. Klicka på \"Nästa\" när du är klar, och "
-"på \"Avbryt\" om du inte vill installera någon skrivare just nu.\n"
-"\n"
-"Observera att vissa datorer kan krascha under den automatiska "
-"identifieringen, inaktivera \"Identifiera skrivare automatiskt\" för att "
-"installera skrivaren utan automatisk identifiering. Använd \"Expertläget\" i "
-"Printerdrake när du vill ställa in utskrift på en nätverksskrivare om inte "
-"Printerdrake hittar den automatiskt."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Identifiera skrivare automatiskt"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Gratulerar, skrivaren är nu installerad och konfigurerad!\n"
-"\n"
-"Du kan skriva ut genom att använda kommandot \"Skriv ut\" i dina program "
-"(oftast från menyn \"Arkiv\").\n"
-"\n"
-"Om du vill lägga till, ta bort eller byta namn på en skrivare, eller om du "
-"vill ändra standardinställningarna (pappersfack, utskriftskvalitet...), välj "
-"\"Skrivare\" i sektionen \"Hårdvara\" i Mandrakes kontrollcentral."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatisk identifiering av skrivare"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake kan automatiskt identifiera lokalt anslutna parallell- och USB-"
-"skrivare åt dig, men observera att på vissa system kan den automatiska "
-"identifieringen HÄNGA DIN DATOR OCH ÄVEN LEDA TILL FÖRSTÖRDA FILSYSTEM! "
-"Använd den på egen risk!\n"
-"\n"
-"Vill du verkligen att dina skrivare ska identifieras automatiskt?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Starta automatisk identifiering"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Installera skrivare manuellt"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Hittade %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Skrivare på pararellport \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-skrivare \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ingen lokal skrivare hittades! För att manuellt installera en skrivare, ange "
-"ett enhetsnamn/filnamn i inmatningsfältet (Pararellportar: /dev/lp0, /dev/"
-"lp1,..., lika med LPT1:, LPT2:,..., Första USB-skrivaren: /dev/usb/lp0, "
-"andra USB-skrivaren: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Du måste ange en enhet eller ett filnamn."
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ingen lokal skrivare funnen!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Nätverksskrivare kan endast installeras efter installationen. Välj \"Hårdvara"
-"\" sedan \"Skrivare\" i Mandrakes kontrollcentral."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"För att installera nätverksskrivare, klicka på \"Avbryt\", byt till "
-"\"Expertläget\" och klicka på \"Lägg till en ny skrivare\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Följande skrivare identifierades automatiskt, om det inte är den du vill "
-"konfigurera, ange ett enhetsnamn/filnamn i inmatningsfältet."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Här är en lista över alla automatiskt identifierade skrivare. Välj skrivaren "
-"du vill ställa in eller ange ett enhetsnamn/filnamn i inmatningsfältet."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Följande skrivare identifierades automatiskt. Konfigurationen av skrivaren "
-"kommer att ske helt automatiskt. Om din skrivare inte identifierades korrekt "
-"eller om du föredrar att konfigurera skrivaren själv, aktivera \"Manuell "
-"konfiguration\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Här är en lista över alla skrivare som identifierades automatiskt. Välj "
-"skrivaren du vill ställa in. Konfigurationen av skrivaren kommer att ske "
-"helt automatiskt. Om din skrivare inte identifierades korrekt eller om du "
-"föredrar att konfigurera skrivaren själv, aktivera \"Manuell konfiguration\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Välj porten till vilken din skrivare är ansluten eller ange ett enhetsnamn/"
-"filnamn i inmatningsfältet."
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Välj porten till vilken skrivaren är ansluten."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Pararellportar: /dev/lp0, /dev/lp1,..., lika med LPT1:, LPT2:,..., Första "
-"USB-skrivaren: /dev/usb/lp0, andra USB-skrivaren: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Du måste välja/ange en skrivare/enhet."
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuell konfiguration"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Är din skrivare en flerfunktionsenhet från HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 med en bildläsare)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installerar HPOJ-paket..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Kontrollerar enhet och konfigurerar HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installerar Sane-paket..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Söker av din HP-flerfunktionsenhet"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Gör skrivarport tillgänglig för CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Läser skrivardatabas..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Alternativ för LPD-fjärrskrivare"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"För att använda en LPD-utskriftskö måste du ange skrivarserverns "
-"värddatornamn och vad skrivarkön heter på den servern."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Fjärrvärddatornamn"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Fjärrskrivarnamn"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Namn på fjärrvärddatorn saknas."
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Namn på fjärrskrivaren saknas."
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB-skrivarinställningar (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"För att skriva ut på en SMB-skrivare ska du uppge SMB-värddatornamnet (detta "
-"är inte alltid samma som DNS-namnet) och om möjligt IP-adressen till "
-"skrivarservern. Även utdelningsnamnet för skrivaren du vill ha tillgång till "
-"och användarnamn med lösenord."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-servervärddator"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-serverns IP-adress"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Utdelningsnamn"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Arbetsgrupp"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Du måste ange antingen serverns namn eller serverns IP-adress!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Namn på Samba-utdelning saknas."
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "SÄKERHETSVARNING!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Du har valt att skriva ut via ett lösenordsskyddat Windows-konto. På grund "
-"av en svaghet i Sambaklientens konstruktion blir lösenordet synligt i "
-"klartext på kommandoraden som Sambaklienten använder för att skicka "
-"utskriftsjobbet till Windows-servern. Så varje användare på denna dator har "
-"möjlighet att se lösenordet på skärmen, genom att ange ett kommando såsom "
-"\"ps auxwww\".\n"
-"\n"
-"Vi rekommenderar att du gör något av följande (hur det än är måste du se "
-"till att bara datorer på ditt lokala nätverk har tillgång till din Windows-"
-"server, t.ex. med hjälp av en brandvägg):\n"
-"\n"
-"\n"
-"Använd ett konto utan lösenord på din Windows-server, t.ex. \"Guest\" eller "
-"annat specialkonto, för dina utskrifter. Ta inte bort lösenordet från ett "
-"personligt konto eller administratörkontot.\n"
-"\n"
-"Ställ in din Windows-server att göra skrivaren tillgänglig över LPD-"
-"protokollet. Använd sedan anslutningsmetoden \"%s\" i Printerdrake för att "
-"konfigurera utskrift från denna maskin.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Ställ in din Windows-server så att den gör skrivaren tillgänglig via IPP-"
-"protokollet och ställ sedan in din dator med anslutningsmetoden \"%s\" i "
-"Printerdrake.\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Anslut din skrivare till en Linux-server och låt dina Windows-datorer jobba "
-"som klienter mot den.\n"
-"\n"
-"Är du säker på att du vill fortsätta med denna typ av installation?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Skrivarinställningar för Netware"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"För att skriva ut på en Netware-skrivare ska du uppge Netware-skrivarnamnet "
-"(detta är inte alltid samma som DNS-namnet) såväl som namnet till skrivarkön "
-"för den skrivare du vill ha tillgång till. Du måste även uppge eventuella "
-"användarnamn med lösenord."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Skrivarserver"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Skrivarkönamn"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Namn på NCP-server saknas."
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Namn på NCP-kö saknas."
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Alternativ för TCP/socket-skrivare"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"För att skriva ut på en TCP- eller socket-skrivare behöver du ange "
-"värddatornamnet för skrivaren och eventuellt också portnummret. På HP "
-"JetDirect-servrar är portnumret vanligtvis 9100, på andra servrar kan det "
-"variera. Se manualen för din hårdvara."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Skrivarvärddatornamn"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Namn på skrivarvärddatorn saknas."
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Skrivarenhetens URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan ange URI för att komma åt skrivaren direkt. URI:n måste uppfylla "
-"antingen CUPS eller Foomatics specifikationer. Inte alla URI-typer stöds av "
-"alla utskriftshanterare."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "En giltig URI måste anges."
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Varje skrivare behöver ett namn (exempelvis \"skrivare\"). Fälten "
-"Beskrivning och Plats behöver inte fyllas i. De är kommentarer för "
-"användarna."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Skrivarens namn"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beskrivning"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Placering"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Förbereder skrivardatabas..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Din skrivarmodell"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake har jämfört modellbeteckningen den kände av automatiskt med "
-"modeller som finns i dess modellista och försökt hitta den som passar bäst. "
-"Valet kan bli fel, speciellt om din skrivare inte finns med i listan "
-"överhuvudtaget. Så kontrollera om valet är korrekt och om så är fallet "
-"klicka på \"Korrekt modell\" annars på \"Välj modell manuellt\" så du kan "
-"välja skrivarmodell manuellt på nästa skärm.\n"
-"\n"
-"För din skrivare har Printerdrake hittat:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Korrekt modell"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Välj modell manuellt"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Val av skrivarmodell"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Vilken skrivarmodell har du?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Kontrollera om Printerdrake utförde den automatiska identifieringen av "
-"skrivaren korrekt. Välj rätt modell i listan om fel modell eller \"Raw "
-"printer\" är markerad."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Om din skrivare inte finns med i listan, välj en kompatibel (se skrivarens "
-"manual) eller en liknande."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Konfiguration av OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Du konfigurerar en OKI laser winprinter. Dessa skrivare\n"
-"använder ett väldigt speciellt kommunikationsprotokoll och fungerar därför "
-"bara när de är anslutna till den första parallellporten. När din skrivare är "
-"ansluten till en annan port eller till en skrivarserver, anslut skrivaren "
-"till den första parallellporten innan du skriver ut en testsida. Annars "
-"kommer skrivaren inte att fungera. Dina inställningar för anslutningstyp "
-"kommer att ignoreras av drivrutinen."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Konfiguration av Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Drivrutinerna för inkjet som tillhandahålls av Lexmark stödjer endast lokala "
-"skrivare, inga skrivare på fjärrdatorer eller skrivarservrar. Anslut din "
-"skrivare till en lokal port eller konfigurera den på datorn till vilken den "
-"är ansluten."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"För att kunna skriva ut med din Lexmark inkjet och denna konfiguration måste "
-"du ha inkjet-drivrutinerna som tillhandahålls av Lexmark (http://www.lexmark."
-"com/). Gå till US-webbplatsen och klicka på knappen \"Drivers\". Välj sedan "
-"din modell och sedan \"Linux\" som operativsystem. Drivrutinerna är RPM-"
-"paket eller skalskript med en interaktiv grafisk installation. Om du inte "
-"vill så behöver du inte göra installationen med det grafiska gränssnittet. "
-"Avbryt direkt efter licensavtalet. Skriv sedan ut justeringssidor med "
-"\"lexmarkmaintain\" och justera huvudjusteringsinställningarna med detta "
-"program."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standardinställningar för skrivare.\n"
-"\n"
-"Du bör se till att sidstorleken och bläcktyp/skrivarläge (om tillgängligt) "
-"samt hårdvaruinställningarna för laserskrivare (minne, duplexenhet, extra "
-"magasin) är inställda korrekt. Observera att med en väldigt hög "
-"utskriftskvalitet kan utskrifterna ta längre tid."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Alternativet %s måste vara ett heltal!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Alternativet %s måste vara ett nummer!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Alternativet %s är utanför området!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Vill du använda skrivaren \"%s\"\n"
-"som standardskrivare?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testsidor"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Välj de testsidor du vill skriva ut.\n"
-"Observera: fototestsidan kan ta ganska lång tid att få utskriven och på "
-"laserskrivare med för lite minne kanske det inte går överhuvudtaget. I de "
-"flesta fall räcker det med att skriva ut standardtestsidan."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Inga testsidor"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Skriv ut"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardtestsida"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testsida (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testsida (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fototestsida"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Skriv inte ut någon testsida"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Skriver ut testsida..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsidan har skickats till skrivaren.\n"
-"Det kan ta lite tid innan skrivaren startar.\n"
-"Skrivarens status:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsidan har skickats till skrivaren.\n"
-"Det kan ta lite tid innan skrivaren startar.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Fungerade det?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Rå skrivare"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"För att skriva ut en fil från kommandoraden (terminalfönster) kan du "
-"antingen använda kommandot \"%s <fil>\" eller ett grafiskt utskriftsverktyg: "
-"\"xpp <fil>\" eller \"kprinter <fil>\". De grafiska verktygen låter dig "
-"välja skrivare och ändra alternativinställningarna på ett enkelt sätt.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Dessa kommandon kan du också använda i fältet \"Utskriftskommando\" som "
-"finns i utskriftsdialogrutan hos många program. Ange då inte filnamnet här, "
-"eftersom filen som ska skrivas ut tillhandahålls av programmet.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Kommandot \"%s\" låter dig också ändra alternativinställningarna för ett "
-"speciellt utskriftsjobb. Lägg bara till de önskade inställningarna till "
-"kommandoraden, t ex \"%s <fil>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"För att se en lista på de tillgängliga alternativen för den aktuella "
-"skrivaren, läs antingen listan som visas nedan eller klicka på "
-"\"Alternativlista för utskrift\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Här är en lista över de tillgängliga utskriftsalternativen för den aktuella "
-"skrivaren:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"För att skriva ut en fil från kommandoraden (terminalfönster) använd "
-"kommandot \"%s <fil>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Detta kommando kan du också använda i fältet \"Utskriftskommando\" som finns "
-"i utskriftsdialogrutan hos många program. Ange då inte filnamnet här, "
-"eftersom filen som ska skrivas ut tillhandahålls av programmet.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"För att se en lista på de tillgängliga alternativen för den aktuella "
-"skrivaren, klicka på \"Alternativlista för utskrift\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"För att skriva ut en fil från kommandoraden (terminalfönster) använd "
-"kommandot \"%s <fil>\" eller \"%s <fil>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan också använda det grafiska gränssnittet \"xpdq\" för att ställa in "
-"olika alternativ och hantera utskrifterna.\n"
-"Om du använder KDE som din skrivbordsmiljö har du en \"panikknapp\", en ikon "
-"på skrivbordet med namnet \"Stoppa skrivare\". Om du klickar på den avbryts "
-"omedelbart alla utskrifter. Detta kan vara användabart om papper har "
-"fastnat.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Kommandona \"%s\" och \"%s\" låter dig också ändra alternativinställningarna "
-"för ett speciellt utskriftsjobb. Lägg bara till de önskade inställningarna "
-"till kommandoraden, t ex \"%s <fil>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Stäng"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Skriver ut/läser in bild på \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Skriver ut på skrivare \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Alternativlista för utskrift"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Din HP-flerfunktionsenhet blev automatiskt konfigurerad för bildinläsning. "
-"Nu kan du läsa in bilder med \"scanimage\" (\"scanimage -d hp:%s\" för att "
-"specificera bildläsare om du har flera) från kommandoraden eller med de "
-"grafiska gränssnitten \"xscanimage\" eller \"xsane\". Om du använder Gimp "
-"kan du också läsa in bilder genom att välja passande punkt i menyn \"Arkiv\"/"
-"\"Inhämta\". Du kan också använda \"man scanimage\" och \"man sane-hp\" på "
-"kommandoraden för att få mer information.\n"
-"\n"
-"Använd inte \"Scannerdrake\" för den här enheten!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Din HP-flerfunktionsenhet blev automatiskt konfigurerad för bildinläsning. "
-"Nu kan du läsa in bilder från kommandoraden med \"ptal-hp %s scan...\". "
-"Bildinläsning från ett grafiskt gränssnitt eller från Gimp stöds inte ännu "
-"för din enhet. Du hittar mer information i dokumentet \"/usr/share/doc/hpoj-"
-"0.8/ptal-hp-scan.html\". Om du har en HP LaserJet 1100 eller 1200 kan du "
-"endast läsa in bilder om du har bildläsaralternativet installerat.\n"
-"\n"
-"Använd inte \"Scannerdrake\" för den här enheten!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Läser skrivardata..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Överför skrivarkonfiguration"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiera skrivarkonfigurationen som du har gjort för spoolern %s till %"
-"s, din aktuella spooler. All konfigurationsdata (skrivarnamn, beskrivning, "
-"plats, anslutningstyp och standardinställningar) flyttas över, men jobb "
-"överförs inte.\n"
-"Alla köer kan inte överföras på grund av följande anledning:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS stödjer inte skrivare på Novell-servrar eller skrivare som skickar data "
-"in till ett \"free-formed\"-kommando.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ stödjer endast lokala skrivare, LPD-fjärrskrivare och Socket/TCP-"
-"skrivare.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD och LPRng stödjer inte IPP-skrivare.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Köer som inte skapats med detta program eller \"foomatic-configure\" kan "
-"inte överföras."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Skrivare konfigurerade med PPD-filerna som tillhandahålls av tillverkarna "
-"eller med de ursprungliga CUPS-drivrutinerna kan inte överföras."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markera skrivarna du vill överföra och klicka på \n"
-"Överför."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Överför inte skrivare"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Överför"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En skrivare med namn \"%s\" existerar redan under %s. \n"
-"Klicka på Överför för att skriva över den.\n"
-"Du kan också ange ett nytt namn eller hoppa över den här skrivaren."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Skrivarnamnet får bara innehålla bokstäver, siffror och "
-"understrykningsstreck."
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Skrivaren \"%s\" existerar redan,\n"
-"vill du verkligen skriva över dess konfiguration?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nytt skrivarnamn"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Överför %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Du har överfört din förra standardskrivare (\"%s\"). Ska den användas som "
-"standardskrivare under det nya skrivarsystemet %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Laddar om skrivardata..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration av fjärrskrivare"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Startar nätverket..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfigurera nätverket nu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Nätverksfunktionalitet ej konfigurerad"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Du är på väg att konfigurera en fjärrskrivare. För detta krävs "
-"nätverksåtkomst, men du har inte konfigurerat ditt nätverk ännu. Om du "
-"fortsätter utan att konfigurera nätverket kommer du inte att kunna använda "
-"skrivaren som du just nu konfigurerar. Hur vill du fortsätta?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Fortsätt utan att konfigurera nätverket"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nätverkskonfigurationen som gjordes under installationen kan inte startas "
-"nu. Kontrollera om du kommer åt nätverket efter det att du har startat upp "
-"systemet och korrigera konfigurationen med Mandrakes kontrollcentral, "
-"sektionen \"Nätverk & Internet\"/\"Anslutning\". Konfigurera sedan skrivaren "
-"med samma kontrollcentral, sektionen \"Hårdvara\"/\"Skrivare\"."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Nätverksåtkomsten var inte igång och kunde inte startas. Kontrollera "
-"konfigurationen och din hårdvara. Försök sedan konfigurera fjärrskrivaren "
-"igen."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Startar om skrivarsystem..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "hög"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerar ett skrivarsystem i säkerhetsnivån %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Du är på väg att installera skrivarsystemet %s på ett system som körs i "
-"säkerhetsnivån %s.\n"
-"\n"
-"Det här skrivarsystemet körs som en demon (bakgrundsprocess) vilken väntar "
-"på skrivarjobb och sedan hanterar dem. Den här demonen är även tillgänglig "
-"för fjärrdatorer via nätverket och kan därmed utsättas för attacker. Därför "
-"startas endast ett fåtal valda demoner som standard i denna säkerhetsnivå.\n"
-"\n"
-"Vill du verkligen konfigurera utskrift på den här datorn?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Startar skrivarsystemet vid uppstart"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Skrivarsystemet (%s) kommer inte att startas automatiskt när datorn startas "
-"upp.\n"
-"\n"
-"Det är möjligt att den automatiska starten inaktiverades genom att "
-"säkerhetsnivån höjdes, eftersom skrivarsystem är en svag punkt när det "
-"gäller attacker.\n"
-"\n"
-"Vill du att den automatiska starten av skrivarsystemet ska aktiveras igen?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Kontrollerar installerad mjukvara..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Tar bort LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Tar bort LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Välj utskriftshanterare"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Vilket utskriftssystem (spooler) vill du använda?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurerar skrivare \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installerar Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Skrivarinställningar"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Förbereder Printerdrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Konfigurerar program..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Vill du konfigurera utskrift?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Skrivarsystem: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Följande skrivare är konfigurerade. Dubbelklicka på en skrivare för att "
-"ändra dess inställningar, göra den till standardskrivare, se information om "
-"den eller för att göra en fjärrskrivare på CUPS-server tillgänglig för Star/"
-"Open Office."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Följande skrivare är inställda. Dubbelklicka på någon av dem för att ändra "
-"dess inställningar, för att använda den som standard eller för att få "
-"information om den."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Uppdatera skrivarlista (för att göra alla CUPS-fjärrskrivare synliga)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Byta skrivarsystem"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalläge"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Vill du konfigurera en annan skrivare?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Ändra skrivarinställning"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Skrivare %s\n"
-"Vad vill du ändra på den här skrivaren?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Ok!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Skrivarens anslutningstyp"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Skrivarens namn, beskrivning, plats"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Skrivarens tillverkare, modell, drivrutin"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Skrivarens tillverkare, modell"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Använd denna skrivare som standardskrivare"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Lägg till den här skrivaren till Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Ta bort den här skrivaren från Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Skriv ut testsidor"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Känner till hur man använder denna skrivare"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Ta bort skrivare"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Tar bort gammal skrivare \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standardskrivare"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Skrivaren \"%s\" kommer nu att används som standardskrivare."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Lägger till skrivaren till Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Skrivare \"%s\" har lagts till Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Misslyckades med att lägga till skrivare \"%s\" till Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Tar bort skrivare från Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Skrivare \"%s\" har tagits bort från Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Misslyckades med att ta bort skrivare \"%s\" från Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Vill du verkligen ta bort skrivaren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Tar bort skrivare \"%s\"..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxykonfiguration"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Välkommen till proxyverktyget.\n"
-"\n"
-"Här kommer du att kunna sätta upp http- och ftp-proxy\n"
-"med eller utan användarnamn och lösenord.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Fyll i information om http-proxy.\n"
-"Lämna blankt om du inte vill ha någon http-proxy."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL ska börja med \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Portdelen ska vara numerisk."
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Fyll i information om ftp-proxy.\n"
-"Lämna blankt om du inte vill ha någon ftp-proxy."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL ska börja med \"ftp:\""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ange användarnamn och lösenord för proxy.\n"
-"Lämna blankt om du inte vill ha något användarnamn/lösenord."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "användarnamn"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lösenord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "bekräfta lösenord"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Du angav inte samma lösenord. Försök igen."
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan inte lägga till en partition till en _formaterad_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan inte skriva fil %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid misslyckades"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid misslyckades (kanske finns det inga raid-verktyg)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Inte tillräckligt många partitioner för RAID-nivå %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Starta ljudsystemet ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron kör kommandon vid angivna, periodiska tidpunkter."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd används för att övervaka batteristatusen i en bärbar dator,\n"
-"samt logga denna till syslog. Den kan även användas för att stänga ner\n"
-"datorn om batteriet håller på att ta slut."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Denna tjänst kör kommandon som givits till \"at\"-kommandot, vid den\n"
-"tidpunkt som angetts. At kan även köra batch-kommandon då\n"
-"datorns belastning minskat under en angiven nivå."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron-tjänsten kan köra program periodiskt vid angivna klockslag.\n"
-"Den här cron-demonen, vixie cron har ett antal utökningar och\n"
-"förbättringar över standard Unix cron, bland annat högre säkerhet\n"
-"och bättre inställningsmöjligheter."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM tillhandahåller musstöd för textbaserade Linux-program,\n"
-"så som Midnight Commander. GPM tillhandahåller också musbaserad\n"
-"kopiering och inklistring samt popupmenyer i konsollen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Harddrake letar efter hårdvara och kan användas för att\n"
-"konfigurera ny/ändrad hårdvara."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache är en www-server (webbserver). Den tillhandahåller HTML-dokument och "
-"CGI-skript."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Inetd är en basserver som startar andra Internetservrar. Den är\n"
-"ansvarig för startandet av många olika tjänster, såsom telnet, ftp,\n"
-"rsh och rlogin. Om inetd är inaktiverad, kan ingen av dessa servrar köras."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Starta paketfiltrering för 2.2-serien av Linuxkärnan, för att sätta\n"
-"upp en brandvägg som skyddar din dator från nätverksattacker."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Den här tjänsten laddar den valda tangentbordsmappningen som\n"
-"ställts in i /etc/sysconfig/keyboard. Inställningen kan ändras med\n"
-"kbdconfig-verktyget. Du bör aktivera detta paket på de flesta datorer."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk omgenerering av kärnans huvud i /boot för\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatisk identifiering och konfiguration av hårdvara vid uppstart."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf kommer emellanåt att utföra olika aktiviteter\n"
-"vid uppstart för att hålla systemet i skick."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"LPD är en skrivardemon som behövs för att lpr ska fungera korrekt.\n"
-"Det är i princip en server som tilldelar utskrifter till skrivare."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, används för att bygga en högpresterande\n"
-"och tillgänglig server."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Named (BIND) är en namnserver (Domain Name Server, DNS) som kan användas för "
-"att slå upp IP-adresser från datornamn."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr "Monterar/avmonterar alla nätverksfilsystem (NFS, SMB och NCP)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverar/inaktiverar alla de nätverkskort som konfigurerats\n"
-"att starta vid uppstart."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS är ett populärt protokoll för fildelning över TCP/IP-nätverk.\n"
-"Den här demonen är en server för detta protokoll, och konfigureras\n"
-"i filen /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS är ett populärt protokoll för fildelning över TCP/IP-nätverk.\n"
-"Den här demonen tillhandahåller NFS-fillåsning."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Aktivera automatiskt numlock för konsolläge\n"
-"och XFree vid uppstart."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Skapa stöd för OKI 4w och kompatibla Windowsskrivare."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA används för att ansluta t ex ethernet-nätverkskort och modem till\n"
-"bärbara datorer. PCMCIA-tjänsten startas inte om den inte behövs, så det är\n"
-"helt säkert att ha den installerad, även på datorer som inte använder den."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmappern hanterar RPC-anslutningar, vilka används av protokoll som t ex\n"
-"NFS och NIS. En portmapper måste köras på de datorer som ska fungera\n"
-"som server för sådana protokoll."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix är en MTA (Mail Transport Agent), vilket är det program som flyttar "
-"e-post mellan datorer."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sparar och återladdar enropi-poolen för att ge högre kvalitet\n"
-"på systemets slumptalsgenerator."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilldela raw-enheter till blockenheter (som t ex hårddiskpartitioner),\n"
-"för användning av program såsom Oracle."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed-demonen uppdaterar automatiskt IP-routing-tabeller via RIP-\n"
-"protokollet. RIP är mycket välanvänt på mindre nätverk, men för komplexare\n"
-"nät krävs kraftfullare protokoll."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat-protokollet låter användare se hur mycket en\n"
-"annan dator som kör en rstat-demon används."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers-protokollet låter användare se vilka som är inloggade på\n"
-"en annan dator som kör en rusers-demon."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho-protokollet låter fjärranvändare se en lista på alla användare\n"
-"som är inloggade på en annan dator som kör en rwho-demon (liknar finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Starta ljudsystemet på din dator"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog är en demon genom vilken andra demoner sköter sin\n"
-"loggning till diverse olika loggfiler. Det är en god idé\n"
-"att alltid köra syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Ladda drivrutinerna för dina USB-enheter."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startar X Font Server (detta är obligatoriskt för att köra XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Välj vilka tjänster som ska startas automatiskt vid uppstart"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Skrivare"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fildelning"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Fjärradministration"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databasserver"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjänster: %d aktiverad för %d registrerad"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Tjänster"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "startad"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppad"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjänster och demoner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Tyvärr, ingen ytterligare information\n"
-"om den här tjänsten."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Vid uppstart"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Tack för att du valde Mandrake Linux 8.2."
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Välkommen till de öppna källkodernas värld."
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Succén för MandrakeSoft bygger på principen fri mjukvara. Ditt nya "
-"operativsystem är resultatet av ett världsomspännande samarbete mellan "
-"människor som använder Linux."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Gå med i den fria mjukvarans värld."
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Lär känna Open Source-världen och bli en del av den. Lär, lär ut och hjälp "
-"andra genom att delta i de många diskussionsgrupperna som finns på våra "
-"\"Community\"-sidor."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet och Messaging"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 ger dig de bästa programmen för att komma åt allt som "
-"Internet har att erbjuda. Surfa på webben och se på animationer med Mozilla "
-"och Konqueror, skicka/ta emot e-post och organisera din personliga "
-"information med Evolution och KMail och mycket mer."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia och grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 låter dig använda din multimediadator fullt ut! Använd de "
-"senaste programmen för att spela musik- och ljudfiler, redigera och "
-"organisera dina bilder och foton, titta på TV och video och mycket mer."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Utveckling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 är den ultimata plattformen för programutveckling. "
-"Upptäck kraften i GNU gcc-kompilatorn och använd de bästa öppna "
-"utvecklingsmiljöerna."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrakes kontrollcentral"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Kontrollcentralen i Mandrake Linux 8.2 är allt du behöver för att anpassa "
-"och konfigurera ditt Mandrake-system."
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Användargränssnitt"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 erbjuder 11 olika grafiska skrivbordsmiljöer och "
-"fönsterhanterare att välja mellan, inklusive GNOME 1.4, KDE 2.2.2, Window "
-"Maker 0.8, m.fl."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Server-mjukvara"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Förvandla din dator till en kraftfull server genom bara några musklick: "
-"webbserver, e-postserver, brandvägg, router, fil- och skrivarserver, etc."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spel"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 levererar de bästa Open Source-spelen. Arkad, action, "
-"kort, sport, strategi, mm."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Vill du lära dig Linux på ett enkelt, snabbt och gratis sätt? MandrakeSoft "
-"erbjuder gratis Linux-träning och sätt för att testa dina framsteg. På "
-"MandrakeCampus, vårt träningscenter på Internet."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalificerad hjälp från Linux-världen och från MandrakeSoft finns precis "
-"bakom hörnet! Om du redan är en Linux-veteran, bli en \"Expert\" och dela "
-"med dig av dina kunskaper på vår supportwebb."
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"För alla dina IT-projekt finns våra konsulter redo för att analysera dina "
-"behov och erbjuda en anpassad lösning. Dra nytta av MandrakeSofts långa "
-"erfarenhet som Linux-producent för att tillhandahålla ett sant IT-alternativ "
-"för din företagsorganisation."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Ett fullt utbud av Linux-lösningar, samt specialerbjudanden på produkter och "
-"annat \"godis\" återfinns i vår nätbutik."
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"För mer information om MandrakeSofts professionella tjänster och "
-"kommersiella erbjudanden se denna webbsida:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installerar paket..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Partitionstabellen kan inte läsas - den är alldeles för trasig.\n"
-"Kommer nu att försöka rensa alla felaktiga partitioner."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fel!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Den nödvändiga avbildsfilen \"%s\" kan inte hittas."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Konfiguration för automatisk installation"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du är på väg att konfigurera en automatisk installationsdiskett. Denna "
-"funktion är en aning riskfylld och måste användas försiktigt.\n"
-"\n"
-"Med den funktionen kan du göra repris av installationen du gjorde på denna "
-"dator, genom att gå igenom några steg och ange dess värden.\n"
-"\n"
-"För maximal säkerhet sker partitionering och formatering aldrig automatiskt, "
-"oavsett vad du väljer vid installationen av denna dator.\n"
-"\n"
-"Vill du fortsätta?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration av automatiska steg"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Välj för varje steg om det ska vara en repris av din installation eller om "
-"det ska utföras manuellt."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Välkommen.\n"
-"\n"
-"Parametrarna för auto-install är tillgängliga i sektionerna till vänster"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulerar!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten har genererats.\n"
-"Du kan nu göra en repris av din installation."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automatisk installation"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Lägg till post"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Ta bort den sista posten"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      Rapport från Drakbackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      Rapport från Drakbackup-demonen\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    Detaljerad rapport från Drakbackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "total fortskridning"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Säkerhetskopiera systemfiler..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Säkerhetskopieringsfiler för hårddisk..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Säkerhetskopiera användarfiler..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Fortskridning av hårddisksäkerhetskopiering..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Säkerhetskopiera andra filer..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"fillista skickad av FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"FTP-anslutningsproblem: Det var inte möjligt att skicka din säkerhetskopia "
-"via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "Fel vid skickning av e-post. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Filval"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Välj filerna eller katalogerna och klicka på Lägg till"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Markera alla alternativ som du behöver.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Dessa alternativ kan säkerhetskopiera och återställa alla filer i katalogen /"
-"etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Säkerhetskopiera dina systemfiler (katalogen /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-"Använd inkrementell säkerhetskopiering (ersätt inte gamla säkerhetskopior)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Inkludera inte kritiska filer (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Med det här alternativet kan du återställa någon version av\n"
-" katalogen /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Markera alla användare som du vill inkludera i säkerhetskopian."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Inkludera inte webbläsarcachen"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-"Använd inkrementell säkerhetskopiering (ersätt inte gamla säkerhetskopior)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Ta bort valda"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Användare"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Använd FTP-anslutning för säkerhetskopiering"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Ange värddatornamnet eller IP-adressen."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Ange katalogen på den här värddatorn\n"
-"där säkerhetskopiorna ska lagras."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Ange ditt användarnamn"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Ange ditt lösenord"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Kom ihåg detta lösenord"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP-anslutning"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Säker anslutning"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Använd cd/dvd-rom för säkerhetskopiering"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Välj cd-utrymme"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Markera om du använder cdrw-media"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Markera om du vill radera din cdrw"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Markera om du vill inkludera\n"
-" installationsstart på cd:n."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Ange enhetsnamnet för cd-brännaren\n"
-" t ex: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Använd band för säkerhetskopiering"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Ange enhetsnamnet som ska användas för säkerhetskopiering"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Ange den maximala storleken\n"
-" som tillåts för Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Ange katalogen som ska sparas:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Använd kvota för säkerhetskopieringsfiler."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Nätverk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "Cdrom / dvdrom"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Hårddisk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "varje timma"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dagligen"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "veckovis"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "månadsvis"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Använd demon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Välj tidsintervallet mellan varje \n"
-"säkerhetskopiering"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Välj mediet för\n"
-"säkerhetskopiering."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Använd hårddisk med demon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Använd FTP med demon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Kontrollera att cron-demonen är inkluderad i dina tjänster."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Skicka en e-postrapport efter varje säkerhetskopiering till:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Vad"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Var"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "När"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Fler alternativ"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Konfiguration av Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Välj var du vill säkerhetskopiera"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "på hårddisk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "över nätverk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Välj vad du vill säkerhetskopiera"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Säkerhetskopiera system"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Säkerhetskopiera användare"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Välj användare manuellt"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Säkerhetskopieringskällor: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemfiler:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Användarfiler:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Andra filer:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Spara till hårddisk på sökväg: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Spara via FTP på värddator: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t användarnamn: %s\n"
-"\t\t på sökväg: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Alternativ:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tInkludera inte systemfiler\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSäkerhetskopiera med tar och bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSäkerhetskopiera med tar och gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Demon (%s) inkluderar:\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hårddisk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-Cd-rom.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Nätverk med FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Nätverk med SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ingen konfiguration, klicka på Guide eller Avancerat.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista på data att återställa:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista på förstörd data:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Avmarkera eller ta bort det nästa gång."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Säkerhetskopieringsfilerna är förstörda"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          All vald data har          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          Återställts på %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Återställ konfiguration       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Ok för att återställa de andra filerna."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Användarlista att återställa (endast det allra senaste datumet per användare "
-"är viktigt)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Säkerhetskopiera systemfilerna före:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "välj datumet som ska återställas"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Använd hårddisk för säkerhetskopiering"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Återställ från hårddisk."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Ange katalogen där säkerhetskopiorna lagras"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Välj ett annat media att återställa från"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Annat media"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Återställ system"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Återställ användare"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Återställ annat"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "välj sökväg att återställa (istället för /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Gör en ny säkerhetskopia före återställning (endast för inkrementella "
-"säkerhetskopior.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Ta bort användarkataloger före återställning."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Återställ alla säkerhetskopior"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Egen återställning"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Hjälp"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Föregående"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Spara"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Bygg säkerhetskopia"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Återställ"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Nästa"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Kör först Bygg säkerhetskopia för att återställa den...\n"
-" eller verifiera att spara-sökvägen är korrekt."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Fel uppstod med Sendmail.\n"
-"  Rapporten via e-post skickades inte.\n"
-"  Konfigurera Sendmail."
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Paketlista att installera"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Fel vid skickning av filer via FTP.\n"
-" Korrigera din FTP-anslutning."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Välj data att återställa..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Välj media för säkerhetskopia..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Välj data att säkerhetskopiera..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ingen konfigurationsfil hittad. \n"
-"Klicka på Guide eller Avancerat."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Under utveckling... vänta."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Säkerhetskopiera systemfiler"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Säkerhetskopiera användarfiler"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Säkerhetskopiera andra filer"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Total fortskridning"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "filer skickas med FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Skickar filer..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Datalista att inkludera på cd-rom."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Ange hastigheten på cd-brännaren"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Ange enhetsnamnet på cd-brännaren (t ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Markera om du vill inkludera installationsstart på cd:n."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Säkerhetskopiera från konfigurationsfil nu"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Visa säkerhetskopieringskonfiguration."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Guidekonfiguration"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Avancerad konfiguration"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Säkerhetskopiera nu"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"Alternativbeskrivning:\n"
-"\n"
-" I det här steget låter Drakbackup dig välja:\n"
-"\n"
-" - Kompressionsläget:\n"
-"    \n"
-"      Om du markerar bzip2-kompression, kommer du att packa\n"
-"      datat bättre än med gzip (ungefär 2-10 %).\n"
-"      Det här alternativet är inte förvalt eftersom\n"
-"      det här kompressionsläget tar längre tid (ungefär 1000% längre).\n"
-" \n"
-" - Uppdateringsläge:\n"
-"\n"
-"      Det här alternativet kommer att uppdatera din säkerhetskopia, men det\n"
-"      här alternativet är egentligen inte användbart eftersom du måste\n"
-"      dekomprimera säkerhetskopian innan du kan uppdatera den.\n"
-"      \n"
-" - Läget \".backupignore\":\n"
-"\n"
-"      Som med CVS, Drakbackup kommer att ignorera alla referenser\n"
-"      som inkluderas i .backupignore-filer i varje katalog.\n"
-"      exempel: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Vissa problem som uppstår med Sendmail orsakas av \n"
-" en felaktig konfiguration av Postfix. För att lösa problemet måste\n"
-" du ställa in myhostname eller mydomain i /etc/postfix/main.cf.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"Alternativbeskrivning:\n"
-"\n"
-" - Säkerhetskopiera systemfiler:\n"
-"       \n"
-"\tDet här alternativet låter dig säkerhetskopiera katalogen /etc,\n"
-"\tvilken innehåller alla konfigurationsfiler. Var försiktig\n"
-"\tnär du återställer så att du inte skriver över:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Säkerhetskopiera användarfiler: \n"
-"\n"
-"\tDet här alternativet låter dig välja alla användare som du vill \n"
-"\tsäkerhetskopiera.\n"
-"\tFör att spara diskutrymme rekommenderas du att \n"
-"\tinte inkludera webbläsarens cache.\n"
-"\n"
-" - Säkerhetskopiera andra filer: \n"
-"\n"
-"\tDet här alternativet låter dig lägga till mer data som du vill spara.\n"
-"\tMed det här alternativet är det ännu inte möjligt att \n"
-"\tvälja inkrementell säkerhetskopia.\t\t\n"
-" \n"
-" - Inkrementell säkerhetskopia:\n"
-"\n"
-"\tInkrementell säkerhetskopia är det kraftfullaste \n"
-"\talternativet för säkerhetskopiering. Det här alternativet låter dig \n"
-"\tsäkerhetskopiera all din data en första gång och bara \n"
-"\tdet som ändrats andra gången.\n"
-"\tUnder återställningssteget kan du återställa data från ett\n"
-"\tspeciellt datum.\n"
-"\tOm du inte väljer det här alternativet kommer\n"
-"\talla gamla säkerhetskopior att tas bort före varje "
-"säkerhetskopiering.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Återställningsbeskrivning:\n"
-" \n"
-"Bara den senaste datan kommer att användas, eftersom det med inkrementella \n"
-"säkerhetskopior är nödvändigt att återställa gamla säkerhetskopior en efter "
-"en.\n"
-"\n"
-"Om du inte vill återställa en användare, avmarkera då dennes\n"
-"kryssrutor.\n"
-"\n"
-"Annars kan du bara välja en av dessa\n"
-"\n"
-"- Inkrementell säkerhetskopia:\n"
-"\n"
-"\tInkrementell säkerhetskopia är det kraftfullaste \n"
-"\talternativet för säkerhetskopiering. Det här alternativet låter dig \n"
-"\tsäkerhetskopiera all din data en första gång och bara \n"
-"\tdet som ändrats andra gången.\n"
-"\tUnder återställningssteget kan du återställa data från ett\n"
-"\tspeciellt datum.\n"
-"\tOm du inte väljer det här alternativet kommer\n"
-"\talla gamla säkerhetskopior att tas bort före varje "
-"säkerhetskopiering.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft av DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Följande text är en informell översättning som enbart tillhandahålls i\n"
-" informativt syfte. För alla juridiska tolkningar gäller den engelska\n"
-" originaltexten.\n"
-" Detta program är fri programvara. Du kan distribuera det och/eller\n"
-" modifiera det under villkoren i GNU General Public License, publicerad\n"
-" av Free Software Foundation, antingen version 2 eller (om du så vill)\n"
-" någon senare version.\n"
-"\n"
-" Detta program distribueras i hopp om att det ska vara användbart, men\n"
-" UTAN NÅGON SOM HELST GARANTI, även utan underförstådd garanti om\n"
-" SÄLJBARHET eller LÄMPLIGHET FÖR NÅGOT SPECIELLT ÄNDAMÅL. Se GNU\n"
-" General Public License för ytterligare information.\n"
-"\n"
-" Du bör ha fått en kopia av GNU General Public License tillsammans med\n"
-" detta program. Om inte, skriv till Free Software Foundation, In.,\n"
-" 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Beskrivning:\n"
-"\n"
-"  Drakbackup används för att säkerhetskopiera ditt system.\n"
-"  Under konfigurationen kan du välja: \n"
-"\t- Systemfiler, \n"
-"\t- Användares filer, \n"
-"\t- Andra filer.\n"
-"\teller hela ditt system... och andra (som till exempel Windows-"
-"partitioner)\n"
-"\n"
-"  Drakbackup låter dig säkerhetskopiera ditt system till:\n"
-"\t- Hårddisk.\n"
-"\t- NFS.\n"
-"\t- Cd-rom (cdrw), DVD-rom (med automatisk start, räddning och automatsik "
-"installation).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Band.\n"
-"\n"
-"  Drakbackup låter dig återställa ditt system till\n"
-"  en katalog som du väljer.\n"
-"\n"
-"  Som standard lagras alla säkerhetskopior i katalogen\n"
-"  /var/drakbackup.\n"
-"\n"
-"  Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Återställningssteg:\n"
-"  \n"
-"  Under återställningssteget kommer Drakbackup att ta bort \n"
-"  din originalkatalog och verifiera att alla \n"
-"  säkerhetskopior inte är förstörda. Du rekommenderas att \n"
-"  göra en säkerhetskopiering innan återställning.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"Alternativbeskrivning:\n"
-"\n"
-"Var försiktig när du säkerhetskopierar till FTP eftersom endast \n"
-"säkerhetskopior som redan byggts skickas till servern.\n"
-"För tillfället måste du bygga säkerhetskopian på din hårddisk \n"
-"innan du skickar den till servern.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Återställningsproblem:\n"
-"\n"
-"Under återställningssteget kommer Drakbackup att verifiera\n"
-"alla dina säkerhetskopior innan den återställer dem.\n"
-"Innan återställningen kommer Drakbackup att ta bort \n"
-"din originalkatalog och all din data \n"
-"försvinner. Det är viktigt att du är försiktig och inte ändrar \n"
-"säkerhetskopiorna för hand.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Beskrivning:\n"
-"\n"
-"  Drakbackup används för att säkerhetskopiera ditt system.\n"
-"  Under konfigurationen kan du välja: \n"
-"\t- Systemfiler, \n"
-"\t- Användares filer, \n"
-"\t- Andra filer.\n"
-"\teller hela ditt system... och andra (som till exempel Windows-"
-"partitioner)\n"
-"\n"
-"  Drakbackup låter dig säkerhetskopiera ditt system till:\n"
-"\t- Hårddisk.\n"
-"\t- NFS.\n"
-"\t- Cd-rom (cdrw), DVD-rom (med automatisk start, räddning och automatsik "
-"installation).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Band.\n"
-"\n"
-"  Drakbackup låter dig återställa ditt system till\n"
-"  en katalog som du väljer.\n"
-"\n"
-"  Som standard lagras alla säkerhetskopior i katalogen\n"
-"  /var/drakbackup.\n"
-"\n"
-"  Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Återställningssteg:\n"
-"  \n"
-"  Under återställningssteget kommer Drakbackup att ta bort\n"
-"  din originalkatalog och verifiera att alla\n"
-"  säkerhetskopior inte är förstörda. Du rekommenderas att\n"
-"  göra en säkerhetskopiering innan återställning.\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installationen av %s misslyckades. Följande fel uppstod:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Sök installerade teckensnitt"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Avmarkera installerade teckensnitt"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "tolka alla teckensnitt"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "inga teckensnitt hittades"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "färdig"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "kunde inte hitta några teckensnitt på dina monterade partitioner"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Välj om korrekta teckensnitt"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "kunde inte hitta några teckensnitt.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Sök teckensnitt i installerad lista"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopiera teckensnitt"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation av True Type-teckensnitt"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "vänta medan ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installation av True Type klar"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konvertering av teckensnitt"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst-byggning"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript-referenser"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "konvertering av ttf-teckensnitt"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "konvertering av pfm-teckensnitt"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Stäng av temporära filer"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Starta om XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Stäng av teckensnittsfiler"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "starta om xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Innan du installerar några teckensnitt måste du vara säker på att du har "
-"rätt att använda och installera dem på ditt system.\n"
-"\n"
-"-Du kan installera teckensnitten på det vanliga sättet. I sällsynta fall kan "
-"felaktiga teckensnitt hänga X-servern."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importera teckensnitt"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hämta från Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Avinstallera teckensnitt"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Avancerade alternativ"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Teckensnittslista"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Välj de program som ska använda teckensnitten:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Allmänna skrivare"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Välj teckensnittsfilen eller katalogen och klicka på Lägg till"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installera lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "klicka här om du är säker."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "här om osäker."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Avmarkera alla"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Markera alla"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Ta bort lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Initiala tester"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopierar teckensnitt till ditt system"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installerar & konverterar teckensnitt"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Bearbetar installation"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Tar bort teckensnitt från ditt system"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Bearbetar avinstallation"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetdelning"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetdelning är för närvarande aktiverat"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfigurationen av Internetdelningen har redan blivit genomförd.\n"
-"Den är för närvarande aktiverad.\n"
-"\n"
-"Vad vill du göra?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "inaktivera"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "avsluta"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "konfigurera om"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Inaktiverar servrar..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetdelning är nu inaktiverat"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetdelning för närvarande inaktiverat"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Konfiguration av Internetdelning har redan genomförts.\n"
-"Den är för närvarande inaktiverad.\n"
-"\n"
-"Vad vill du göra?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktivera"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Aktiverar servrar..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetdelning är nu aktiverat"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du är på väg att konfigurera din dator för att dela sin Internetanslutning.\n"
-"Med den funktionen kan andra datorer i ditt nätverk använda din dators "
-"Internetanslutning.\n"
-"\n"
-"Observera: du behöver ett dedikerat nätverkskort för att sätta upp ett "
-"lokalt nätverk (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Gränssnitt %s (använder modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Gränssnitt %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Inget nätverkskort i ditt system."
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Inget Ethernet-nätverkskort har hittats i ditt system. Kör "
-"konfigurationsverktyget för hårdvara."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Nätverksgränssnitt"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Det finns bara ett konfigurerat nätverkskort i ditt system:\n"
-"\n"
-"%s\n"
-"\n"
-"Ditt lokala nätverk kommer att sättas upp med det kortet."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Välj vilket nätverkskort som ska kopplas mot ditt lokala nätverk."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Nätverksgränssnitt redan konfigurerat"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varning, nätverkskortet (%s) är redan konfigurerat.\n"
-"\n"
-"Vill du ha en automatisk omkonfiguration?\n"
-"\n"
-"Du kan göra det manuellt men du måste veta vad du gör."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatisk omkonfiguration"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Visa aktuell gränssnittskonfiguration"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuell konfiguration av \"%s\":\n"
-"\n"
-"Nätverk: %s\n"
-"IP-adress: %s\n"
-"IP-attribut: %s\n"
-"Drivrutin: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Vi kan behålla din aktuella konfiguration och anta att du redan har satt upp "
-"en DHCP-server; om så är fallet, verifiera att C-klassnätverket som du "
-"använder på ditt lokala nätverk blev korrekt läst. Det kommer inte att "
-"konfigureras om och din konfiguration av DHCP-servern kommer inte att "
-"röras.\n"
-"\n"
-"Annars kan vi konfigurera om ditt gränssnitt och konfigurera (om) en DHCP-"
-"server åt dig.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokalt C-klassnätverk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Den här) DHCP-serverns IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Konfigurera om gränssnitt och DHCP-server"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Det lokala nätverket slutade inte med \".0\", avbryter."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potentiell LAN-adresskonflikt hittad i aktuell konfiguration av %s.\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Brandväggskonfiguration upptäckt!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varning! En existerande brandväggskonfiguration har upptäckts. Du behöver "
-"eventuellt en manuell fix efter installationen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurerar..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerar skript, installerar mjukvara, startar servrar..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem att installera paket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Allt har nu blivit konfigurerat.\n"
-"Du kan nu dela Internetanslutning med andra datorer i ditt lokala nätverk, "
-"genom automatisk nätverkskonfiguration (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurationen är redan gjord, men är för närvarande inaktiverad."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurationen är redan gjord och är för närvarande aktiverad."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ingen Internetdelning har varit konfigurerad."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfigurera Internetanslutning och delning"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Välkommen till verktyget för Internetdelning!\n"
-"\n"
-"%s\n"
-"\n"
-"Klicka på Konfigurera för att starta inställningsguiden."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nätverkskonfiguration (%d kort)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Ta bort profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil att ta bort:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Ny profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Namn på profilen som ska skapas (den nya profilen skapas som en kopia av den "
-"aktuella):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Värddatornamn: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetåtkomst"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Gränssnitt:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Vänta"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurera Internetåtkomst..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN-konfiguration"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drivrutin"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Gränssnitt"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurera lokalt nätverk..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klicka här för att starta guiden ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Guide..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Verkställ"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Vänta... verkställer konfigurationen"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Ansluten"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Inte ansluten"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Anslut..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Koppla ner..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varning, en annan Internetanslutning har upptäckts som kanske använder ditt "
-"nätverk."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har inga gränssnitt konfigurerade.\n"
-"Konfigurera dem först genom att klicka på Konfigurera."
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN-konfiguration"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Kort %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Startprotokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Startad vid uppstart"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivera nu"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "inaktivera nu"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Gränssnittet har inte konfigurerats ännu.\n"
-"Starta konfigurationsguiden i huvudfönstret."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen Internetanslutning.\n"
-"Skapa en först genom att klicka på Konfigurera."
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguration av Internetanslutning"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration av Internetanslutning"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Anslutningstyp: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrar"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Verkställer säkerhetsnivå"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollcentral"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Välj vilket verktyg du vill använda"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Östeuropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Västeuropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australien"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nya Zeeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Sydafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Ange\n"
-"din TV-standard och ditt land"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-standard:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Område:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Sökning efter TV-kanaler pågår..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Söker efter TV-kanaler"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Inget TV-kort kunde hittas!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Inget TV-kort kunde hittas i din dator. Kontrollera att ditt TV-kort har "
-"stöd för Linux och att det sitter i ordentligt.\n"
-"\n"
-"\n"
-"Du kan besöka vår hårdvarudatabas på:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "användning: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Välj tangentbordslayout."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vill du att \"Backspace\" ska returnera \"Delete\" i konsollen?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Byt cd-skiva"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Sätt in cd-skivan med installationen och klicka på Ok.\n"
-"Om du inte har den, klicka på Avbryt för att undvika live-uppdatering."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan inte starta live-uppdateringen.\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Ändringen är genomförd men för att aktiveras måste du logga ut."
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Visa endast för den valda dagen"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Arkiv/_Ny"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Arkiv/_Öppna"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Arkiv/_Spara"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Arkiv/Spar_a som"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Arkiv/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Alternativ"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Alternativ/Testa"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hjälp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Hjälp/_Om..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Användare"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Meddelanden"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslogg"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Förklaring av Mandrake-verktyg"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "sök"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ett verktyg för att övervaka dina loggar"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Inställningar"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "matchar"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "matchar inte"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Välj fil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Innehållet i filen"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "E-post/SMS-underrättelse"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vänta, behandlar fil: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Konfiguration av e-post/SMS-underrättelse"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Välkommen till verktyget för e-post/SMS-konfiguration.\n"
-"\n"
-"Här kan du ställa in underrättelsesystemet.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "inställning för tjänst"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Du kommer att få en underrättelse om en av de valda tjänsterna inte längre "
-"körs"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "ladda inställning"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Du kommer att få en underrättelse om belastningen överskrider det här värdet"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "Underrättelsekonfiguration"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Anpassa på vilket sätt systemet ska underrätta dig"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Spara som..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Välj mustyp."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ingen serial_usb hittades\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulera tredje knappen?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s hittades på %s, konfigurera den?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Välj en bildläsare"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Bildläsaren %s stöds inte"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake kunde inte hitta din %s-scanner.\n"
-"Välj den enhet som din scanner sitter kopplad till."
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "välj enhet"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Denna %s scanner måste konfigureras av printerdrake.\n"
-"Du kan starta printerdrake från Mandrakes kontrollcentral i avdelningen "
-"Hårdvara."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Din %s-scanner har blivit konfigurerad.\n"
-"Du kan nu läsa in bilder och dokument med hjälp av \"XSane\" som finns i "
-"Multimedia/Grafik-menyn."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Brandväggskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Brandväggskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brandvägg\n"
-"\n"
-"Du har redan satt upp en brandvägg.\n"
-"Klicka på Konfigurera för att ändra eller ta bort brandväggen."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brandvägg\n"
-"\n"
-"Klicka på Konfigurera för att sätta upp en standardbrandvägg."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Välj språk"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Välj installationsklass"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Identifiering av hårddisk"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurera mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Välj tangentbord"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Säkerhet"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Konfigurera filsystem"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatera partitioner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Välj paket för installation"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installera system"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Lägg till användare"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurera nätverk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurera tjänster"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installera starthanterare"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Skapa startdiskett"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurera X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installera systemuppdateringar"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Avsluta installationen"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Tinyfirewall-konfigurator\n"
-"\n"
-"Detta konfigurerar en personlig brandvägg för denna Mandrake Linux-dator.\n"
-"För en kraftfull och dedikerad brandväggslösning, ta en titt på den\n"
-"specialiserade distributionen MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi kommer nu att ställa frågor om vilka tjänster du vill tillåta\n"
-"Internet att komma åt. Tänk efter noga innan du\n"
-"svarar, eftersom din dators säkerhet är viktig.\n"
-"\n"
-"Om du inte använder någon eller några av dessa tjänster\n"
-"se till att blockera dem. Du kan ändra denna konfiguration\n"
-"när som helst genom att köra detta program på nytt."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kör du en webbserver på denna dator som hela Internet behöver komma\n"
-"åt? Om du kör en webbserver som bara behöver kommas åt lokalt av den\n"
-"här datorn, kan du med säkerhet svara Nej här.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kör du en namnserver på denna dator? Om du inte använder en\n"
-"sådan, för att förmedla IP- och zoneinformation till hela Internet,\n"
-"svara Nej.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Vill du tillåta inkommande Secure Shell-anslutningar (SSH)? Det\n"
-"är en telnet-ersättare som du kan använda för att logga in. Om du\n"
-"använder telnet nu, borde du definitivt byta till SSH. Telnet är inte\n"
-"krypterat -- så attackerare kan stjäla dina lösenord om du använder\n"
-"det. SSH är krypterat och tillåter inte samma avlyssning."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vill du tillåta inkommande telnet-anslutningar?\n"
-"Det innebär en stor risk, som vi förklarade på förra skärmen.\n"
-"Du rekommenderas att svara Nej och använda SSH\n"
-"istället för telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kör du en FTP-server som måste vara åtkomlig från Internet? Om du gör det,\n"
-"rekommenderar vi att du bara använder den för överföringar med Anonymous.\n"
-"Alla lösenord som skickas av FTP kan stjälas av attackerare eftersom FTP\n"
-"inte använder någon kryptering vid överföringen av lösenord.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kör du en e-postserver? Om du skickar brev\n"
-"via Pine, Mutt eller någon annan textbaserad e-postklient,\n"
-"gör du antagligen det. Annars borde du blockera med brandvägg.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kör du en POP- eller IMAP-server här? Det skulle användas\n"
-"för att erbjuda icke-webbaserade e-postkonton till människor\n"
-"genom denna dator.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Du verkar köra en 2.2-kärna. Om din IP-adress ska\n"
-"tilldelas automatiskt av en dator i ditt hem eller på jobbet\n"
-"(dynamisk adressering) behöver vi tillåta det att ske.\n"
-"Är så fallet?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Blir din dator tidsynkroniserad med en annan dator?\n"
-"Vanligtvis används detta av mellanstora och stora Unix/Linux-företag\n"
-"för att synkronisera tider för loggning och dylikt. Om du inte är del\n"
-"i en större kontorsmiljö och inte har hört talas om denna funktion,\n"
-"blir den nog inte det."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurationen slutförd. Ska dessa ändringar skrivas till disken?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan inte öppna %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan inte öppna %s för skrivning: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nej, jag behöver inte DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, jag behöver DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nej, jag behöver inte NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, jag behöver NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Spara inte"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Spara och avsluta"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Brandväggsguiden"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nej (blockera detta mot Internet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ja (låt detta komma igenom brandväggen)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Vänta... Verifierar installerade paket"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Kunde inte installera nödvändiga paket: %s och Bastille.\n"
-" Försök installera dem manuellt."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Webb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Nätverksdator (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-server, SMB-server, Proxyserver, SSH-server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome arbetsstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Verktyg för din Palm Pilot eller Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbetsstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Brandvägg/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domännamns- och Network Information-Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontorsprogram: ordbehandlare (Kword, Abiword), kalkylprogram (Kspread, "
-"Gnumeric), PDF-visare, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ljudrelaterade verktyg: MP3- eller Midi-spelare, mixrar, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Böcker och \"Howto's\" om Linux och fri mjukvara"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE arbetsstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"En samling verktyg för e-post, diskussioner, webb, filöverföring och chatt"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databas"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL- eller MySQL-databasserver"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Verktyg för att underlätta konfigurationen av din dator"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Ljud"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Verktyg"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsollverktyg"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "E-postservern Postfix, Diskussionsgruppsservern Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetstation"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediastation"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Fler grafiska skrivbordsmiljöer (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, den grundläggande grafiska miljön med en samling "
-"tillhörande verktyg"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk miljö"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Verktyg för att skapa och bränna cd-skivor"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontorsarbetsstation"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiska program som till exempel Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Utvecklingsbibliotek, program och include-filer för C och C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Nätverksserver"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-post/Gruppprogram/Diskussioner"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spelstation"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospelare och editorer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underhållande program: arkad, brädspel, strategi, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"En samling verktyg för att läsa och skicka e-post och nyheter (Pine, Mutt, "
-"Tin...) och för att utforska webben"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivering, emulatorer, övervakning"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig ekonomi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"En grafisk miljö med en samling användarvänliga program och skrivbordsverktyg"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter för olika protokoll inkluderande SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Redigerings- och uppspelningsprogram för video och ljud"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andra grafiska skrivbordsmiljöer"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorer, skal, filverktyg, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Program för att hantera din ekonomi, som till exempel Gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personlig informationshantering (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - cd-bränning"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vetenskaplig arbetsstation"
diff --git a/perl-install/share/po/th.po b/perl-install/share/po/th.po
deleted file mode 100644
index 8724955b8..000000000
--- a/perl-install/share/po/th.po
+++ /dev/null
@@ -1,11570 +0,0 @@
-# SOME DESCRIPTIVE TITLE
-# Copyright (C) 1999 MandrakeSof
-#
-# Kan Yuenyong <kan@kaiwal.com>, 1999
-# Wachara Chinsettawong <wachara@yahoo.com>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-04-05 14:03GMT+7\n"
-"Last-Translator: Wachara Chinsettawong <wachara@yahoo.com>\n"
-"Language-Team: Thai\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=tis-620\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configure all heads independently"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Use Xinerama extension"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "¤Í¹¿Ô¡à©¾ÒСÒÃì´ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multi-head configuration"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"à¤Ã×èͧ¢Í§¤Ø³Ê¹ÑºÊ¹Ø¹¡Òä͹¿Ô¡áºº multihead \n"
-"¤Ø³µéͧ¡Ò÷ÓÍÐäÃ?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "¡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "àÅ×Í¡¡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "àÅ×Í¡ X à«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X à«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "àÅ×Í¡ X à«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X à«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree ª¹Ô´ã˹·Õè¤Ø³µéͧ¡ÒÃÁÕ"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Your card can have 3D hardware acceleration support with XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s with 3D hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "¡Òä͹¿Ô¡ XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "àÅ×Í¡¢¹Ò´Ë¹èǤÇÒÁ¨Ó¢Í§¡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "àÅ×Í¡ÍÍ»ªÑè¹à¾ÔèÁàµÔÁÊÓËÃѺà«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "àÅ×Í¡¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"¢Ñ鹵͹µèÍ仹Õé¨ÐµéͧãÊè¾ÒÃÒÁÔàµÍÃì·ÕèÁÕ¤ÇÒÁÊӤѭÊͧµÑÇ ä´éá¡èÍѵÃÒ¤ÇÒÁ¶Õè\n"
-"¢Í§¡ÒÃÊ᡹ÀÒ¾µÒÁá¹ÇµÑé§ (vertical refresh rate) «Öè§à»ç¹¤ÇÒÁ¶Õè·ÕèÁÕ¡ÒÃ\n"
-"ÃÕà¿Ãª¨ÍÀÒ¾·Ñé§¨Í áÅСÒÃÍѵÃÒÊ᡹ÀÒ¾µÒÁá¹Ç¹Í¹ «Öè§à»ç¹ÍѵÃҢͧ¡ÒÃÇÒ´¢Í§\n"
-"àÊ鹡ÇÒ´ÊÔ觷ÕèÊӤѭÁÒ¡¡ç¤×Í ¤Ø³¨ÐµéͧÃкت¹Ô´¢Í§Ë¹éҨͫÖè§ÍѵÃÒ¤ÇÒÁ¶Õè·Õè\n"
-"äÁèà¡Ô¹¤ÇÒÁÊÒÁÒö¢Í§¨ÍÀÒ¾ äÁèàªè¹¹Ñé¹ÍÒ¨à¡Ô´¤ÇÒÁàÊÕÂËÒ¡Ѻ¨ÍÀÒ¾ä´é\n"
-"ËÒ¡äÁèá¹èã¨â»Ã´àÅ×Í¡à«çµÍѾẺÁҵðҹ"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "ÍѵÃÒ¡ÒÃÃÕà¿ÃªµÒÁá¹Ç¹Í¹"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "ÍѵÃÒ¡ÒÃÃÕà¿ÃªµÒÁá¹ÇµÑé§"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "äÁèÁÕ¡Òä͹¿Ô¡¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "ÂѧäÁèä´é¤Í¹¿Ô¡¡ÃÒ¿¿Ô¡¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "ÂѧäÁèä´éàÅ×Í¡¤ÇÒÁ¢¹Ò´¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "¤Ø³µéͧ¡Ò÷´Êͺ¡Òä͹¿Ô¡ËÃ×ÍäÁè"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ÃÐÇѧ ¡Ò÷´Êͺ¡ÒÃì´áÊ´§¼ÅÍÒ¨·ÓãËé¤ÍÁ¾ÔÇàµÍÃìËÂØ´¡Ò÷ӧҹ"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "·´Êͺ¡Òä͹¿Ô¡"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"Åͧà»ÅÕè¹¾ÒÃÒÁÔàµÍÃìºÒ§µÑÇ"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "ÁÕ¢éͼԴ¾ÅÒ´à¡Ô´¢Öé¹:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "ÍÍ¡ÀÒÂã¹ %d ÇÔ¹Ò·Õ"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "¶Ù¡µéͧËÃ×ÍäÁè?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "à¡Ô´¤ÇÒÁ¼Ô´¾ÅÒ´¢Öé¹ â»Ã´á¡é䢾ÒÃÒÁÔàµÍÃìºÒ§ÍÂèÒ§"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "¢¹Ò´¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "àÅ×Í¡¢¹Ò´¨ÍÀÒ¾áÅФÇÒÁÅÐàÍÕ´ÊÕ"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "¡ÃÒ¿¿Ô¤¡ÒÃì´: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "à«ÔÃì¿àÇÍÃì XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "More"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "µ¡Å§"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ẻ¼ÙéàªÕèÂǪҭ (Expert)"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "áÊ´§¢éÍÁÙÅ·Ñé§ËÁ´"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "¤ÇÒÁÅÐàÍÕ´"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "àÅ×Í¡ª¹Ô´¢Í§¤ÕÂìºÍÃì´: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "àÅ×Í¡ª¹Ô´¢Í§àÁéÒÊì: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "´ÕäÇ«ì¢Í§àÁéÒÊì: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¨ÍÀÒ¾: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "ÍѵÃÒ¤ÇÒÁ¶Õè¡ÇÒ´µÒÁá¹Ç¹Í¹: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "ÍѵÃÒ¤ÇÒÁ¶Õè¡ÇÒ´µÒÁá¹ÇµÑé§: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "¡ÃÒ¿¿Ô¤¡ÒÃì´: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "¡ÃÒ¿¿Ô¤¡ÒÃì´: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "¢¹Ò´Ë¹èǤÇÒÁ¨Ó¢Í§¡ÃÒ¿¿Ô¤¡ÒÃì´: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "ͤÇÒÁÅÐàÍÕ´ÊÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "¤ÇÒÁÅÐàÍÕ´¢Í§ÀÒ¾ %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "à«ÔÃì¿àÇÍÃì XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "ä´ÃìàÇÍÃì XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "àµÃÕÂÁ¡Òä͹¿Ô¡¢Í§ X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "¤Ø³µéͧ¡ÒèзÓÍÐäÃ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "à»ÅÕ蹨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "à»ÅÕ蹡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "à»ÅÕè¹ÍÍ»ªÑ蹢ͧà«ÔÃì¿àÇÍÃì"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "à»ÅÕè¹¢¹Ò´¨ÍÀÒ¾"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "áÊ´§¢éÍÁÙÅ"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "·´ÊͺÍÕ¡¤ÃÑé§"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "ÍÍ¡"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"à¡çº¡ÒÃà»ÅÕè¹á»Å§\n"
-"¡ÒûÃѺáµè§»Ñ¨¨ØºÑ³¤×Í:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "ãËéà»ç¹¡ÃÒ¿¿Ô¤àÁ×èÍàÃÔèÁµé¹"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"â»Ãá¡ÃÁ¨Ð¡Ó˹´ãËé¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ãªé§Ò¹áºº¡ÃÒ¿¿Ô¤àÁ×èÍàÃÔèÁºÙµ\n"
-"¤Ø³µéͧ¡ÒèÐãËé·Ó§Ò¹áºº¡ÃÒ¿¿Ô¤àÁ×èÍÃÕºÙµËÃ×ÍäÁè?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "¡ÃسÒà¢éÒä»·Õè %s ÍÕ¡¤ÃÑé§à¾×èÍàÃÔèÁ¡ÒÃà»ÅÕè¹á»Å§"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "¡ÃسÒÍÍ¡ä»áÅÐãªé Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ÊÕ (8 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "ÊÒÁËÁ×è¹Êͧ¾Ñ¹ÊÕ (15 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "Ë¡ËÁ×è¹ËéҾѹÊÕ (16 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "ÊԺˡÅéÒ¹ÊÕ (24 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "ÊÕè¾Ñ¹ÅéÒ¹ÊÕ (32 ºÔµ)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ËÃ×ÍÁÒ¡¡ÇèÒ"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "¨ÍÀÒ¾ÇÕ¨ÕàÍẺÁҵðҹ 640x480 ·Õè 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA ¢¹Ò´ 800x600 ·Õè 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "¤ÍÁá¾µµÔàºÔšѺ 8514 ¢¹Ò´ 1024x768 ·Õè 87 Hz interlaced (äÁèÁÕ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA ¢¹Ò´ 1024x768 ·Õè 87 Hz interlaced ¢¹Ò´ 800x600 ·Õè 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ·Õè 60 Hz, 640x480 ·Õè 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ·Õè 60 Hz, 800x600 ·Õè 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA ¢¹Ò´ 1024x768 ·Õè 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency «Öè§ÊÒÁÒö¡Ó˹´¢¹Ò´ 1280x1024 ·Õè 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency «Öè§ÊÒÁÒö¡Ó˹´¢¹Ò´ 1280x1024 ·Õè 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency «Öè§ÊÒÁÒö¡Ó˹´¢¹Ò´ 1280x1024 ·Õè 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "¨ÍÀÒ¾·ÕèÊÒÁÒö¡Ó˹´ 1600x1200 ·Õè 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "¨ÍÀÒ¾·ÕèÊÒÁÒö¡Ó˹´ 1600x1200 ·Õè 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "à«ç¡àµÍÃìáá¢Í§ºÙµ¾ÒÃìµÔªÑè¹"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "à«ç¡àµÍÃìáá¢Í§ä´ÃÇì (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "¡ÒõԴµÑé§ SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "¤Ø³¨ÐµÔ´µÑ駺ٵâËÅ´à´ÍÃìäÇé·Õèä˹?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "¡ÒõԴµÑé§ LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO Ẻ text menu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO Ẻ graphical menu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot ¨Ò¡ DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "ÍêÍ»ªÑè¹ËÅÑ¡¢Í§ Bootloader"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader ·Õè¨Ðãªé"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "¡ÒõԴµÑé§ Bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "ÍØ»¡Ã³ìºÙµ"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (doesn't work on old BIOSes)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "ẺÍÑ´ (Compact)"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "ẺÍÑ´ (compact)"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "âËÁ´¢Í§¡ÒÃáÊ´§¼Å"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "˹èǧàÇÅÒ¡è͹·Ó¡ÒúٵÍÔÁàÁ¨·Õèãªé"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "ÃËÑʼèÒ¹"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "ÃËÑʼèÒ¹ (ãÊèÍÕ¡¤ÃÑé§)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "ÍçÍ»ªÑ蹨Óà¾ÒзÕèãªé¡Ñº¤ÍÁÁÒ¹´ìäŹì"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "¨Óà¾ÒÐ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "ź /tmp µÍ¹ boot ·Ø¡¤ÃÑé§"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "¡Ó˹´¤èÒ˹èǤÇÒÁ¨Ó (RAM) ãËé¶Ù¡µéͧ¶éÒµéͧ¡Òà (Ãкº¾º %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Enable multi profiles"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "ãËé»é͹¢éÍÁÙŢͧ¢¹Ò´Ë¹èǤÇÒÁ¨Óà»ç¹ Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ÍçÍ»ªÑè¹ ``ÍêÍ»ªÑ蹨Óà¾ÒзÕèãªé¡Ñº¤ÍÁÁÒ¹´ìäŹì'' ¨ÐµéͧãÊèÃËÑʼèÒ¹´éÇÂ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "â»Ã´ÅͧÍÕ¡¤ÃÑé§"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "ÃËÑʼèÒ¹äÁèàËÁ×͹¡Ñ¹"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "¢éͤÇÒÁ init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Enable CD Boot?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Enable OF Boot?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"µèÍ仹Õéà»ç¹¢éÍÁÙŵèÒ§æ\n"
-"¤Ø³ÊÒÁÒöà¾ÔèÁ¢éÍÁÙÅËÃ×Íá¡é䢢éÍÁÙÅ·ÕèÁÕä´é"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "à¾ÔèÁ"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "·ÓàÃÕºÃéÍÂáÅéÇ"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "á¡éä¢ RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "¢éÍÁÙÅ»ÃÐàÀ·ã´·Õè¤Ø³µéͧ¡ÒÃà¾ÔèÁ"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Åչء«ì"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ãкº»¯ÔºÑµÔ¡ÒÃÍ×è¹æ (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ãкº»¯ÔºÑµÔ¡ÒÃÍ×è¹æ (Mac OS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ãкº»¯ÔºÑµÔ¡ÒÃÍ×è¹æ (ÇÔ¹â´ÇÊì...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "ź¢éÍÁÙÅ"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "äÁè͹حҵãËéÁÕËÑÇ¢éÍÇèÒ§"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "¤Ø³¨ÐµéͧÁÕ¾ÒÃìµÔªÑè¹ÊÇÍ»"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "ËÑÇ¢é͹Õé¶Ù¡ãªéä»àÃÕºÃéÍÂáÅéÇ"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "µÃǨ¾º %s ÍÔ¹à·ÍÃìà¿Ê %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "¤Ø³ÁÕÍѹÍ×è¹æÍÕ¡ËÃ×ÍäÁè?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¤Ø³ÁÕÍÔ¹à·ÍÃìà¿Ê %s ¨Ó¹Ç¹à·èÒäËÃè?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "äÁèµéͧ"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "ãªè"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "ÍèÒ¹µèÍ¢éÍÁÙŢͧÎÒÃì´áÇÃì"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "µÔ´µÑé§ä´ÃàÇÍÃìÊÓËÃѺ %s ¡ÒÃì´ %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(âÁ´ÙÅ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "µéͧ¡ÒÃãËéâ»Ãá¡ÃÁ·´Åͧãªéä´ÃàÇÍÃì %s ª¹Ô´ã´?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"㹺ҧ¡Ã³Õ ÊÓËÃѺä´ÃàÇÍÃì %s ¨Ð¨Óà»ç¹µéͧãªé¢éÍÁÙÅà¾ÔèÁàµÔÁà¾×èÍ\n"
-"ãËéÊÒÁÒö·Ó§Ò¹ä´é¶Ù¡µéͧ áÁéÇèÒä´ÃàÇÍÃìÍÒ¨·Ó§Ò¹ä´éâ´Â»¡µÔ â´Â»ÃÒȨҡ\n"
-"¢éÍÁÙŴѧ¡ÅèÒÇ   ¤Ø³µéͧ¡ÒèÐÃкØÍêÍ»ªÑè¹à¾ÔèÁàµÔÁ¾ÔàÈÉËÃ×ÍãËéâ»Ãá¡ÃÁ·Ó¡ÒÃ\n"
-"µÃǨËÒ¢éÍÁÙÅ·Õè¨Óà»ç¹µéͧãªé? 㹺ҧ¡Ã³Õ¡ÒõÃǨËÒÍÒ¨·ÓãËé¤ÍÁ¾ÔÇàµÍÃìáΧ¤ì\n"
-"áµè¨ÐäÁèà»ç¹ÍѹµÃÒ¡Ѻ¤ÍÁ¾ÔÇàµÍÃì"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "µÃǨËÒÍѵâ¹ÁѵÔ"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "ÃкØÍêÍ»ªÑè¹"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"¤Ø³ÊÒÁÒö»é͹¢éÍÁÙÅÍêÍ»ªÑè¹ãËé¡ÑºâÁ´ÙÅ %s ä´éáÅéÇ\n"
-"ÍêÍ»ªÑ蹨ÐÍÂÙèã¹ÃٻẺ ``name=value name2=value2 ...''\n"
-"µÑÇÍÂèÒ§àªè¹, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "ÍêÍ»ªÑ蹢ͧâÁ´ÙÅ:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"¡ÒÃâËÅ´âÁ´ÙÅ %s ÅéÁàËÅÇ\n"
-"¤Ø³µéͧ¡ÒÃãËé·´ÅͧÍÕ¡¤ÃÑ駴éǾÒÃÒÁÔàµÍÃìÍ×è¹æÍÕ¡ËÃ×ÍäÁè?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(à¾ÔèÁ %s àÃÕºÃéÍÂáÅéÇ)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "ÃËÑʼèÒ¹¹Õé§èÒµèÍ¡ÒÃà´Ò"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "â»Ã´»é͹ª×èͼÙéãªé"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "ª×èͼÙéãªé¨ÐÊÒÁÒöÁÕä´é੾ÒеÑÇÍÑ¡ÉõÑÇàÅç¡ µÑÇàÅ¢ '-' áÅÐ '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "ª×èͼÙéãªé¹Õéä´é¶Ù¡à¾ÔèÁŧä»ã¹ÃкºàÃÕºÃéÍÂáÅéÇ"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "à¾ÔèÁ¼Ùéãªé"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ãËéãÊè¼Ùéãªé\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "ÂÍÁÃѺ¼Ùéãªé"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "ª×èÍàµçÁ"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "ª×èͼÙéãªé"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "àªÅÅì·Õèãªé"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"¼ÁäÁèÊÒÁÒö·ÓãËé·èÒ¹à¢éÒ·Ó§Ò¹â´Âãªéª×èͤ¹¤¹Ë¹Öè§áººÍѵâ¹ÁѵÔ\n"
-"¶éҤسäÁèµéͧ¡ÒÃãªé§Ò¹ÃٻẺ¹Õé¡Ãسҡ´»ØèÁ¡àÅÔ¡"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "àÅ×Í¡¼Ùéãªé default"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "àÅ×Í¡ window manager:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "¡ÃسÒàÅ×Í¡ÀÒÉÒ·Õèµéͧ¡ÒÃãªé"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "¤Ø³ÊÒÁÒöàÅ×Í¡ÀÒÉÒÍ×蹫Ö觨ÐÊÒÁÒöãªéä´éËÅѧµÔ´µÑé§"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "·Ñé§ËÁ´"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "à¾ÔèÁ¼Ùéãªé"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Ẻ»ÃѺá¡éä´é (Customized) "
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"ᾡࡨ¹Õé¨Óà»ç¹µéͧ¶Ù¡ upgrade\n"
-"¤Ø³á¹èã¨ÇèÒ¨ÐäÁèàÅ×Í¡ÁѹËÃ×Í"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "¡àÅÔ¡"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Welcome To Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "µèÓ¡ÇèÒÁҵðҹ"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "ÊÙ§"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "ÊÙ§"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "àÅ×Í¡ÃдѺÃкºÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "àÅ×Í¡ÃдѺÃкºÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "àÅ×Í¡ÍÍ»ªÑè¹à¾ÔèÁàµÔÁÊÓËÃѺà«ÔÃì¿àÇÍÃì"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"ÂÔ¹´Õµé͹ÃѺÊÙè %s â»Ãá¡ÃÁàÅ×Í¡ãªéÃкº»¯ÔºÑµÔ¡ÒÃ!\n"
-"\n"
-"àÅ×Í¡Ãкº»¯ÔºÑµÔ¡ÒÃËÃ×Í\n"
-"ÃÍ %d ÇÔ¹Ò·Õà¾×èÍãªé¡Òúٵ¨Ò¡µÑÇàÅ×Í¡µÑ駵é¹\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "ÂÔ¹´Õµé͹ÃѺÊÙè GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "ãªé %c áÅÐ %c à¾×èÍàÅ×Í¡."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "¡Ãسҡ´ enter Ãкº·Õèµéͧ¡Òà 'e' à¾×èÍà»ÅÕè¹á»Å§ "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "¤ÓÊÑ觡è͹ boot, ËÃ×Í 'c' ¶éÒµéͧ¡Òà command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "OS ·Õè¶Ù¡àÅ×Í¡¨Ð·Ó¡Òà boot ã¹ %d ÇÔ¹Ò·Õ"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "äÁèÁÕ·Õè¾Íã¹ /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "¤Ø³¨ÐµÔ´µÑ駺ٵâËÅ´à´ÍÃìäÇé·Õèä˹?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "no help implemented yet.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Boot Style Configuration"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_ä¿Åì"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/ä¿Åì/_àÅÔ¡"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "¨ÍÀÒ¾ª¹Ô´ãËÁè"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "¨ÍÀÒ¾·ÑèÇä»"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Gtk+ Monitor ·ÑèÇä»"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ãѹ Aurora ¢³Ð boot"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "¡ÒÃËÁعâ·ÃÈѾ·ì´éÇÂâÁà´çÁ"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Boot mode"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÂÔ¹´Õµé͹ÃѺÊÙèà¤Ã×èͧÁ×Í㹡ÒõԴµèÍ internet Ẻ share\n"
-"\n"
-"%s\n"
-"\n"
-"¡´ ``Ok'' ¶éҤسµéͧ¡ÒÃàÃÔèÁ¡Ò÷ӧҹ¢Í§ setup wizard"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "¡ÒûÃѺáµè§"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "System mode"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Ãѹ X-Window àÁ×èÍàÃÔèÁ·Ó§Ò¹"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "äÁèµéͧ¡Òà autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "ãªèáÅéÇ ¼Áµéͧ¡Òà autologin ÊÓËÃѺ¼ÙéãªéÃÒ¹Õé"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "äÁèÊÒÁÒöà»Ô´ /etc/inittab ÁÒÍèÒ¹ä´é: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ¹Ò·Õ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ¹Ò·Õ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ÇÔ¹Ò·Õ"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "â»Ãá¡ÃÁäÁèÊÒÁÒöà¾ÔèÁ¾ÒÃìµÔªÑè¹ä´éÍÕ¡"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "¤Ø³ÊÒÁÒöàÅ×Í¡ÀÒÉÒÍ×蹫Ö觨ÐÊÒÁÒöãªéä´éËÅѧµÔ´µÑé§"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "½ÃÑè§àÈÉ"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "àºÅàÂÕèÂÁ"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "àÂÍÃÁѹ"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "¡ÃÕ¡"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "¹ÍÃìàÇÂì"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "ÊÇÕà´¹"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "ÍÔµÒÅÕ"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "¾ÍÃìµÍ¹Ø¡ÃÁ"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "¡ÃØ³Ò·Ó backup ¡è͹"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "â»Ã´ÍèÒ¹ÍÂèÒ§¶Õè¶éǹ!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"¶éҤسµéͧ¡ÒÃãªé aboot ¤ÇÃÃÐÇѧÇèÒµéͧÁÕ·ÕèÇèÒ§ (2048 sectors) \n"
-"´éҹ˹éҢͧ disk"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "¼Ô´¾ÅÒ´"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Wizard"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "àÅ×Í¡¡Ô¨¡ÃÃÁ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"¶éҤسÁÕ ¾ÒÃìµÔªÑè¹ FAT ·ÕèãË­è ¾ÒÃìµÔªÑè¹ à´ÕÂÇ\n"
-"(«Öè§â´Â»¡µÔ Microsoft Dos/Windows ã¢é)\n"
-"¼Áá¹Ð¹ÓãËé¤Ø³»ÃѺ¢¹Ò´ ¾ÒÃìµÔªÑè¹ àÊÕ¡è͹\n"
-"(¡´·ÕèÁѹáÅéÇ¡´ \"»ÃѺ¢¹Ò´\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "â»Ã´àÅ×Í¡¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "ÃÒÂÅÐàÍÕ´"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "¡ÒÃàÁéÒ·ìÅéÁàËÅÇ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "ÊÇÍ»"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "ÇèÒ§"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Í×è¹æ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "»ÃÐàÀ·¢Í§Ãкºä¿Åì:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "ÊÃéÒ§"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "»ÃÐàÀ·"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ãªé ``%s'' á·¹"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "ź"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "ãªé ``Unmount'' ¡è͹"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "¡ÒÃà»ÅÕ蹪¹Ô´¾ÒÃìµÔªÑè¹ %s ¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹¹Õé¨Ð¶Ù¡Åº·Ôé§"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "àÅ×Í¡¡Ô¨¡ÃÃÁ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "ÊÃéÒ§¾ÒÃìµÔªÑè¹ãËÁè"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "»¡µÔ > ÊÓËÃѺ¼ÙéªÓ¹Ò­"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "ÊÓËÃѺ¼ÙéªÓ¹Ò­ > »¡µÔ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "¡àÅÔ¡"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "·Ó§Ò¹µèÍËÃ×ÍäÁè?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "ÍÍ¡â´ÂäÁèµéͧºÑ¹·Ö¡"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "ÍÍ¡â´ÂäÁèµéͧà¢Õ¹µÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "¤Ø³µéͧ¡Ò÷´Êͺ¡Òä͹¿Ô¡ËÃ×ÍäÁè"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "¡Ó˹´áººÍѵâ¹ÁѵÔ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "ÅéÒ§·Ñé§ËÁ´"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "¡ÒõÃǨËÒÎÒÃì´ä´ÃÇì"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "¾ÒÃìµÔªÑè¹áºº primary ¶Ù¡ãªé·Ñé§ËÁ´áÅéÇ"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "â»Ãá¡ÃÁäÁèÊÒÁÒöà¾ÔèÁ¾ÒÃìµÔªÑè¹ä´éÍÕ¡"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"ËÒ¡µéͧ¡ÒÃà¾ÔèÁ¾ÒÃìµÔªÑè¹ â»Ã´Åº¾ÒÃìµÔªÑè¹·Ôé§Ë¹Ö觾ÒÃìµÔªÑè¹à¾×èÍÊÃéÒ§\n"
-"¾ÒÃìµÔªÑè¹áºº extended ä´é"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "ºÑ¹·Ö¡µÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "¡ÙéµÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "¡ÙéµÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "¡ÙéµÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "àÅ×Í¡ä¿Åì"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"¾ÒÃìµÔªÑè¹áºç¤ÍѾäÁèÁÕ¢¹Ò´à·èҡѹ\n"
-"µéͧ¡Ò÷ӵèÍËÃ×ÍäÁè?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "¤Óàµ×͹"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"¡ÃسÒãÊèá¼è¹¿ÅéÍ»»Õéã¹ä´ÃÇì\n"
-"¢éÍÁÙÅ·Ñé§ËÁ´º¹á¼è¹¿ÅéÍ»»Õé¨Ð¶Ù¡Åº"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "¡ÓÅѧ¾ÂÒÂÒÁ¡ÙéµÒÃÒ§¾ÒÃìµÔªÑ蹤׹"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "áÊ´§¢éÍÁÙÅ"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "¡Ó˹´¨Ø´àÁéÒ·ì"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-#, fuzzy
-msgid "Options"
-msgstr "/Options/·´Åͧ"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "à»ÅÕè¹¢¹Ò´"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "ÂéÒÂ"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "¿ÍÃìáÁµ"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "àÁéÒ·ì"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "à¾ÔèÁãËé RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "à¾ÔèÁãËé LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "àÅÔ¡àÁéÒ·ììÃкºä¿Åì"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "źÍÍ¡¨Ò¡ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "źÍÍ¡¨Ò¡ LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "á¡éä¢ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "ãªéÊÓËÃѺ loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "ÊÃéÒ§¾ÒÃìµÔªÑè¹ãËÁè"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "àÃÔèÁà«ç¡àµÍÃì: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "¢¹Ò´à»ç¹ MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "»ÃÐàÀ·¢Í§Ãкºä¿Åì: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "¨Ø´àÁéÒ·ì: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "¢éÍ¡Ó˹´: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "¿ÍÃìáÁµ loopback file %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "à»ÅÕè¹»ÃÐàÀ·¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "¤Ø³µéͧ¡ÒÃàÅ×Í¡ filesystem ã´"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "¤Ø³µéͧ¡ÒÃàÁéÒ·ì loopback file %s äÇé·Õèã´?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "¤Ø³µéͧ¡ÒÃàÁéÒ·ìÍØ»¡Ã³ì %s äÇé·Õèã´?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "¤Ó¹Ç³¢Íºà¢µ¢Í§Ãкºä¿Åì"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "»ÃѺ¢¹Ò´"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "¾ÒÃìµÔªÑè¹¹ÕéäÁèÊÒÁÒöà»ÅÕè¹¢¹Ò´ä´é"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹¹Õé¤ÇèзӡÒÃÊÓÃͧäÇé"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "ËÅѧ¨Ò¡à»ÅÕè¹¢¹Ò´¾ÒÃìµÔªÑè¹ %s ¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹¹Õé¨ÐËÒÂä»"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "àÅ×Í¡¢¹Ò´ãËÁè"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "¢¹Ò´à»ç¹ MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "¤Ø³µéͧ¡ÒèÐÂéÒÂä»´ÔÊ¡ìä˹"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "à«ç¡àµÍÃì"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "¤Ø³µéͧ¡ÒÃÂéÒÂä»à«ç¡àµÍÃìä˹"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "ÂéÒÂ"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "ÂéÒ¾ÒÃìµÔªÑè¹..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "àÅ×Í¡ RAID à¾×èÍà¾ÔèÁà¢éÒä»"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ãËÁè"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "àÅ×Í¡ LVM ·ÕèÁÕÍÂÙèà¾×èÍà¾ÔèÁà¢éÒä»"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "ª×èÍ LVM"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "¾ÒÃìµÔªÑè¹¹ÕéäÁèÊÒÁÒöãªé¡Ñº loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "ª×èÍ Loopback file: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "ª×èÍàµçÁ"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "File already used by another loopback, choose another one"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "ä¿ÅìÁÕÍÂÙèáÅéÇ µéͧ¡ÒÃãªé?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "ÍêÍ»ªÑ蹢ͧâÁ´ÙÅ:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ÍØ»¡Ã³ì"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "ÃдѺ"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "¢¹Ò´¢Í§ chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "ÃÐÇѧ ¡Ò÷ӧҹ¹ÕéÍѹµÃÒÂ"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "¡ÒÃ·Ó partitioning ª¹Ô´ã´?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"¢ÍÍÀÑ â»Ãá¡ÃÁäÁèÊÒÁÒöÊÃéÒ§ /boot º¹ä´Ã¿ì (·ÕèÁÕ¢¹Ò´ä«ÅÔ¹à´ÍÃìÁÒ¡¡ÇèÒ 1024)\n"
-"ËÃ×ͤسãªé LILO áÅÐâ»Ãá¡ÃÁäÁè·Ó§Ò¹ ËÃ×ͤسäÁèä´éãªé LILO áÅФسäÁèµéͧ¡Òà /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"¾ÒÃìµÔªÑè¹·Õè¤Ø³àÅ×Í¡ãËéà»ç¹ root (/) ÁÕ¡ÒáÓ˹´·Ò§¡ÒÂÀÒ¾ãËéÁÕ¢¹Ò´à¡Ô¹\n"
-"ä«ÅÔ¹à´ÍÃì·Õè 1024 ¢Í§ÎÒÃì´´ÔÊ¡ì áÅФسäÁèÁÕ¾ÒÃìµÔªÑè¹ /boot\n"
-"¶éҤسµéͧ¡ÒÃãªé LILO à»ç¹ºÙµáÁà¹à¨ÍÃì â»Ã´ÃÐÁÑ´ÃÐÇѧ㹡ÒÃà¾ÔèÁ¾ÒÃìµÔªÑè¹ /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"¤Ø³ä´éàÅ×Í¡ Software RAID ¾ÒÃìµÔªÑè¹ à»ç¹ root (/) \n"
-"bootloader äÁèÊÒÁÒö·Ó§Ò¹â´ÂäÁèÁÕ /boot ¾ÒÃìµÔªÑè¹ \n"
-"à¾ÃÒЩ¹Ñ鹨Óà»ç¹µéͧà¾ÔèÁ /boot ¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "µÒÃÒ§¾ÒÃìµÔªÑ蹢ͧä´Ã¿ì %s ¨Ð¶Ù¡ºÑ¹·Ö¡Å§ä»ã¹´ÔÊ¡ì"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "¤Ø³¨Ðµéͧ·Ó¡ÒÃÃÕºÙµÃкº¡è͹·Õè¨Ð·Ó¡ÒÃá¡éä¢"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "ËÅѧ¨Ò¡ format ¾ÒÃìµÔªÑè¹ %s ¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹¹Õé¨Ð¶Ù¡Åº·Ôé§"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "¿ÍÃìáÁµ"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "¿ÍÃìáÁµ loopback file %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "¿ÍÃìáÁµ¾ÒÃìµÔªÑè¹ %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid failed"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "äÁèÁÕ¾×é¹·Õèà¾Õ§¾ÍÊÓËÃѺ ¾ÒÃìµÔªÑè¹ ãËÁè"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "äÁèÁÕ¾×é¹·Õèà¾Õ§¾ÍÊÓËÃѺ ¾ÒÃìµÔªÑè¹ ãËÁè"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "¤ÇÒÁÅÐàÍÕ´¢Í§ÀÒ¾ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "ÍØ»¡Ã³ì: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "ÍÑ¡ÉÃä´ÃÇìẺ´ÍÊ: %s (à»ç¹¡ÒäҴà´Ò)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "»ÃÐàÀ·: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "ª×èÍ: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "àÃÔèÁµé¹: à«ç¡àµÍÃì %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "¢¹Ò´: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s à«ç¡àµÍÃì"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "ä«ÅÔ¹à´ÍÃì %d à»ç¹ ä«ÅÔ¹à´ÍÃì %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "¿ÍÃìáÁµ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "ÂѧäÁèä´é¿ÍÃìáÁµ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "àÁéÒ·ì\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback file(s): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"¾ÒÃìµÔªÑè¹·Õè¡Ó˹´ãËéºÙµ«Ö觡Ó˹´äÇéáÅéÇ\n"
-"    (ÊÓËÃѺºÙµ¢Í§ MS-DOS äÁèãªè lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "ÃдѺ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "¢¹Ò´¢Í§ Chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "´ÔÊ¡ìẺ RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback file name: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"ÁÕ¤ÇÒÁà»ç¹ä»ä´é·Õè¾ÒÃìµÔªÑè¹¹Õé\n"
-"à»ç¹¾ÒÃìµÔªÑ蹢ͧä´ÃàÇÍÃì ¤Ø³¤Ç÷Õè¨Ð\n"
-"»ÅèÍÂÁѹ·Ôé§äÇéẺ¹Õé\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "¢¹Ò´: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "¢éÍÁÙÅ·Ò§¡ÒÂÀÒ¾: %s ä«ÅÔ¹à´ÍÃì, %s ËÑÇÍèÒ¹, %s à«é¡àµÍÃì\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "¢éÍÁÙÅ: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disks %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ª¹Ô´µÒÃÒ§¾ÒÃìµÔªÑè¹: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "º¹ºÑÊ %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "¾ÒÃìµÔªÑè¹ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "»ÃÐàÀ·¢Í§Ãкºä¿Åì: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "ÃËÑÊÅѺ§èÒÂà¡Ô¹ä» (µéͧÁÕÍÂèÒ§¹éÍ %d µÑÇÍÑ¡ÉÃ)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "ÃËÑʼèÒ¹äÁèàËÁ×͹¡Ñ¹"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "à»ÅÕè¹»ÃÐàÀ·¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "â»Ã´àÅ×Í¡¾ÒÃìµÔªÑè¹"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "à«ÔÃì¿àÇÍÃì DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "¡ÓÅѧ¿ÍÃìáÁµ %s ¢Í§ %s ·ÕèÁջѭËÒ"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "äÁè·ÃÒºÇèҨпÍÃìáÁµ %s à»ç¹ª¹Ô´ %s ä´éÍÂèÒ§äÃ"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "¼Ô´¾ÅҴ¡àÅÔ¡¡ÒÃàÁéÒ·ì %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "§èÒÂ"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "à«ÔÃì¿àÇÍÃì"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "¤Ø³äÁèÊÒÁÒöãªé JFS ÊÓËÃѺ¾ÒÃìµÔªÑè¹·Õè¹éÍ¡ÇèÒ 16MB ä´é"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "¤Ø³äÁèÊÒÁÒöãªé ReiserFS ÊÓËÃѺ¾ÒÃìµÔªÑè¹·Õè¹éÍ¡ÇèÒ 32MB ä´é"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "¨Ø´àÁéÒ·ì¨ÐµéͧàÃÔèÁ´éÇ /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "ÁÕ¾ÒÃìµÔªÑè¹·Õèà»ç¹¨Ø´àÁéÒ·ì·Õè %s àÃÕºÃéÍÂáÅéÇ\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "¤Ø³äÁèÊÒÁÒöãªé LVM Logical Volume ÊÓËÃѺ %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "This directory should remain within the root filesystem"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "¤Ø³äÁèÊÒÁÒöãªé LVM Logical Volume ÊÓËÃѺ %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "äÁèÁÕ¾×é¹·Õèà¾Õ§¾ÍÊÓËÃѺ¡ÒÃáºè§ÊÑ´Êèǹ¾ÒÃìµÔªÑè¹áººÍÍâµé"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "à¡Ô´¢éͼԴ¾ÅҴ㹡ÒÃà»Ô´ %s ÊÓËÃѺ¡ÒÃà¢Õ¹: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"à¡Ô´¢éͼԴ¾ÅÒ´¢Öé¹ - äÁ辺ÍØ»¡Ã³ì·Õè¶Ù¡µéͧà¾×èͨÐÊÃéÒ§Ãкºä¿ÅìãËÁè "
-"â»Ã´µÃǨÊͺÎÒÃì´áÇÃì¢Í§·èÒ¹à¾×èÍá¡é䢻ѭËÒ¹Õé"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "¤Ø³ÂѧäÁèä´éáºè§¾ÒÃìµÔªÑè¹!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "¡ÃسÒÍ´·¹ÃÍÊÑ¡¤ÃÙè ¡Ò÷ӧҹÍÒ¨ãªéàÇÅÒËÅÒ¹ҷÕ"
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"¡ÃسÒàÅ×Í¡ \"µÔ´µÑé§\" ¶éÒÂѧäÁèà¤ÂÁÕ¡ÒõԴµÑé§ Mandrake Linux ÁÒ¡è͹\n"
-"ËÃ×͵éͧ¡ÒõԴµÑé§ OS ËÅÒµÑÇ\n"
-"\n"
-"\n"
-"¡ÃسÒàÅ×Í¡ \"Update\" ¶éҤسµéͧ¡Òà Update Mandrake Linux ·ÕèµÔ´µÑé§ÍÂÙèáÅéÇ\n"
-"\n"
-"\n"
-"áÅéÇáµè¤ÇÒÁÃÙéã¹ Linux ¢Í§¤Ø³ ¡ÃسÒÇÔ¸Õ¡Ò÷ÕèàËÁÒÐÊÁ·ÕèÊØ´\n"
-"\n"
-"* Recommanded: ¶éҤسäÁèà¤Âŧ Linux ÁÒ¡è͹\n"
-"\n"
-"* Customized: ¶éҤسÃÙé¨Ñ¡ Linux ´Õ ¤Ø³ÊÒÁÒöàÅ×Í¡¡ÒÃŧẺ\n"
-" (workstation, server, ËÃ×Í development)\n"
-"\n"
-"\n"
-"* Expert: ¶éҤسÁÕ¤ÇÒÁÃÙé Linux à»ç¹ÍÂèÒ§´Õ àªè¹à´ÕÂǡѺ¡ÒÃŧẺ \n"
-" customized ¤Ø³ÊÒÁÒöàÅ×͡ŧẺ workstation, server, ËÃ×Í \n"
-" development) ¤Ø³¤ÇÃÃÐÇѧÍÂèÒ§Áҡ㹡ÒÃàÅ×͡ŧÅѡɳйÕé\n"
-" ¶éҤسäÁèá¹è㨡ÃسÒàÅ×͡ŧÇÔ¸ÕÍ×è¹"
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"¤Ø³¨ÐµéͧºÍ¡ãËé·ÃÒºÇèҤسµéͧ¡ÒÃãÊè¢éÍÁÙÅ\n"
-"·Õèà¡ÕèÂÇ¢éͧ¡Ñº¡ÒúٵÅչء«ìäÇé·Õèã´\n"
-"\n"
-"\n"
-"¶éҤسäÁè·ÃÒºÇèҤس¨Ðµéͧ·ÓÍÂèÒ§äà â»Ã´àÅ×Í¡ \"à«ç¡àµÍÃìáá¢Í§ä´ÃÇì (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ¨Ð¾ÂÒÂÒÁËÒ PCI SCSI adapter(s)  ¶éÒ DrakX\n"
-"ËÒà¨Í SCSI adapter áÅÐÃÙéÇèÒ¤ÇÃãªéä´ÃìàÇÍÃìÍÐäà Áѹ¡ç¨Ð\n"
-"¶Ù¡µÔ´µÑé§â´ÂÍÍâµàÁµÔ¡\n"
-"\n"
-"\n"
-"¶éҤسÁÕ SCSI adapter ISA adapter ËÃ×Í PCI SCSI adapter ·Õè DrakX\n"
-"äÁèÊÒÁÒöËÒà¨Í  ¤Ø³¨Ðâ´¹¶ÒÁÇèÒÁÕ  SCSI adapter ã¹à¤Ã×èͧ¢Í§¤Ø³\n"
-"ËÃ×ÍäÁè  ¶éÒäÁèÁÕ¡Ãسҡ´·Õè \"äÁè\"  áµè¶éҤس¡´Å§·Õè  \"äªè\" ¤Ø³¨ÐµéͧàÅ×Í¡\n"
-"ª¹Ô´¢Í§ adapter ·Õè¤Ø³ÁÕÍÂÙè\n"
-"\n"
-"\n"
-"¶éҤسà»ç¹¤¹àÅ×Í¡ Adapter àͧ DrakX ¨Ð¶ÒÁÇèҤس¨Ð»é͹¢éÍÁÙÅ\n"
-"Option ËÃ×ÍäÁè  ¶Ö§µÃ§¹Õé¤Ø³¤ÇèÐãËé DrakX ¤é¹ËÒ option ·ÕèàËÁÒÐÊÁ\n"
-"«Öè§â´Â·ÑèÇä»Áѹ¨ÐÊÒÁÒöËÒä´éàͧÍÂèÒ§¶Ù¡µéͧ\n"
-"\n"
-"\n"
-"áµè¶éÒäÁèÊÓàÃ稤س¨Óà»ç¹·Õè¨ÐµéͧãËé¢éÍÁÙÅ Option àͧ  ¤Ø³¤ÇÃËÒ¢éÍÁÙÅà¾ÔèÁ\n"
-"àµÔÁä´é¨Ò¡¤ÙèÁ×Í (º··Õè 3 µÍ¹ Collective informations on your hardware ) ËÃ×Í \n"
-"¨Ò¡ Web Site ¢Í§¼Ùé¼ÅÔµ ËÃ×Í ¨Ò¡ Microsoft Windows ¶éҤسÁÕµÔ´µÑé§"
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"àÅ×Í¡ harddisk ·Õèµéͧ¡ÒÃźáÅÐŧ Mandrake Linux\n"
-"¤ÇÃÃÐÇѧà»ç¹ÍÂèÒ§ÁÒ¡´¾ÃÒÐÇèÒ¢éÍÁÙÅ·Ø¡ÍÂèÒ§¨Ð¶Ù¡Åº\n"
-"áÅШÐäÁèÊÒÁÒö¡Ùé¤×¹ä´é"
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"¡´ \"OK\" ¶éҤسµéͧ¡ÒÃź¢éÍÁÙÅ·Ñé§ËÁ´º¹ harddisk ¹Õé\n"
-"¹ÕèÃÇÁ¶Ö§ partitions ·Ñé§ËÁ´«Öè§ÃÇÁ¶Ö§ Windows ´éÇÂ\n"
-"\n"
-"\n"
-"¡´ \"¡àÅÔ¡\" à¾×èÍ¡àÊÔ¡¡Ò÷ӧҹ¹Õé"
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õé·Õè format Ẻ FAT ŧã¹ä´ÃÇì %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "èá¼è¹¿ÅéÍ»»Õé¹Õé äÁèãªè ẺFAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "ÁջѭËҡѺ¡ÒÃÍèÒ¹¢éÍÁÙÅã¹ä¿Åì %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"hardware ºÒ§ª¹Ô´µéͧ¡Òà driver ¾ÔàÈÉ\n"
-"¤Ø³ÊÒÁÒöËÒ¢éÍÁÙÅä´é¨Ò¡: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"¤Ø³µéͧÁÕ root ¾ÒÃìµÔªÑè¹\n"
-"à¾ÃÒЩ¹Ñ鹤سµéͧÊÃéÒ§ ¾ÒÃìµÔªÑè¹ (ËÃ×Í¡´àÅ×Í¡Íѹ·ÕèÁÕÍÂÙè)\n"
-"ËÅѧ¨Ò¡¹Ñé¹àÅ×Í¡ ``Mount Point'' áÅШѴãËéÁѹà»ç¹ `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "¤Ø³¨ÐµéͧÁÕ¾ÒÃìµÔªÑè¹ÊÇÍ»"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"¤Ø³äÁèÁÕÊÇÍ»¾ÒÃìµÔªÑè¹àÅÂ\n"
-"\n"
-"µéͧ¡ÒèзӵèÍËÃ×ÍäÁè?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "¤Ø³¨ÐµéͧÁÕ¾ÒÃìµÔªÑè¹ÊÇÍ»"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "ãªé¾×é¹·Õè·ÕèÇèÒ§"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "äÁèÁÕ¾×é¹·Õèà¾Õ§¾ÍÊÓËÃѺ ¾ÒÃìµÔªÑè¹ ãËÁè"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "ãªé¾ÒÃìµÔªÑè¹·ÕèÁÕÍÂÙè"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "äÁèÁÕ¾ÒÃìµÔªÑè¹·ÕèÁÕÍÂÙè·Õèãªé§Ò¹ä´é"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "ãªé windows partion ÊÓËÃѺ¡Òà Loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "¾ÒÃìµÔªÑè¹ã˹·Õè·èÒ¹µéͧ¡ÒÃãªé¡Ñº Linux4Win"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "àÅ×Í¡¢¹Ò´"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "¢¹Ò´¢Í§¾ÒÃìµÔªÑè¹ÃÙ· MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "¢¹Ò´¾ÒÃìµÔªÑè¹ Swapà»ç¹ MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "ãªé¾×é¹·Õè·ÕèÇèҧ㹠Windows partition"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "¾ÒÃìµÔªÑè¹ä˹·Õè¤Ø³µéͧ¡ÒÃà»ÅÕè¹¢¹Ò´"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "¤Ó¹Ç³¢Íºà¢µ¢Í§Ãкºä¿Åì Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"µÑÇà»ÅÕè¹¢¹Ò´äÁèÊÒÁÒö·Ó§Ò¹¡Ñº partition ¢Í§¤Ø³\n"
-"ÁÕ¢éͼԴ¾ÅÒ´¹Õéà¡Ô´¢Öé¹: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Windows partition ¢Í§¤Ø³¡ÃШѴ¡ÃШÒÂÁÒ¡à¡Ô¹ä» ¡ÃØ³Ò Defrag ¡è͹"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÃÐÇѧ!\n"
-"DrakX ¡ÓÅѧ¨ÐÅ´¢¹Ò´¾ÒÃìµÔªÑ蹢ͧ windows ¡Ò÷ӧҹ¹ÕéÍѹµÅÒÂÁÒ¡\n"
-"¶éҤسÂѧäÁèà¤Â·ÓÁÒ¡è͹¤Ø³¤ÇÃÍÍ¡¨Ò¡¡Ò÷ӧҹ¹ÕéáÅÐÃѹ Scandisk º¹\n"
-"Windows (áÅÐ defrag) áÅéǤèÍÂàÃÔèÁ·Ó§Ò¹¹ÕéãËÁè  áÅФسÊÁ¤Ç÷Õè¨Ð·Ó¡ÒÃ\n"
-"Backup ¢éÍÁÙÅÊӤѭ¢Öé¹ÁÒ¡è͹\n"
-"àÁ×èͤسá¹èã¨áÅéÇ ¡´ OK"
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "¤Ø³µéͧ¡ÒÃà¡çº Windows äÇéã¹¢¹Ò´ã˹"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "¾ÒÃìµÔªÑè¹ %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "¡ÒáÓ˹´¢¹Ò´ FAT à¡Ô´¡ÒüԴ¾ÅÒ´: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "äÁèÁÕ ¾ÒÃìµÔªÑè¹ FAT à¾×èÍ·Ó¡ÒÃà»Õè¹¢¹Ò´ËÃ×ÍãËéãªéà»ç¹ loopback (¾×é¹·ÕèäÁè¾Í)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "ź disk ·Ñé§ËÁ´"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "ź Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "¤Ø³ÁÕ harddisk ÁÒ¡¡ÇèÒ  1 µÑÇ  ¤Ø³µéͧ¡ÒÃŧ linux º¹ harddisk µÑÇã˹"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑè¹·Ñé§ËÁ´¨ÐÊÙ­ËÒÂä» %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "¡ÓÅѧ¾ÒÃìµÔªÑè¹ Custom disk"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "ãªé fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"¤Ø³ÊÒÁÒö¾ÒÃìµÔªÑè¹ %s à´ÕëÂǹÕé\n"
-"àÁ×èÍàÊÃç¨áÅéÇÍÂèÒÅ×ÁºÑ¹·Ö¡â´Âãªé `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "¤Ø³äÁèÁÕ¾×é¹·Õèà¾Õ§¾Íã¹¾ÒÃìµÔªÑè¹ Windows!"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "¼ÁäÁèÊÒÁÒöËÒ¾×é¹·ÕèÇèÒ§à¾×èÍ·Ó¡ÒõԴµÑé§"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "The DrakX Partitioning wizard à¨Í·Ò§àÅ×Í¡´Ñ§µèÍ仹Õé"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "¡Ò÷ӾÒÃìµÔªÑè¹ÅéÁàËÅÇ: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Ãкºà¹çµàÇÔÃì¡¡ÓÅѧ¨Ð·Ó§Ò¹"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ãкºà¹çµàÇÔÃì¡¡ÓÅѧ¨ÐËÂØ´·Ó§Ò¹"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"ÁÕ¤ÇÒÁ¼Ô´¾ÅÒ´à¡Ô´¢Öé¹ áµèâ»Ãá¡ÃÁäÁèÊÒÁÒöá¡éä¢ä´é\n"
-"ËÒ¡·Ó§Ò¹µèÍÍÒ¨à¡Ô´¤ÇÒÁàÊÕÂËÒÂä´é"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "·Ó«éӨشàÁéÒ·ì %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"á¾ç¡à¡¨ÊӤѭºÒ§ÍÂèÒ§äÁèä´é¶Ù¡µÔ´µÑé§ÍÂèÒ§àÃÕºÃéÍÂ\n"
-"cdrom ËÃ×Í cdrom drive ¢Í§¤Ø³ÍÒ¨ÁÕ¡ÒÃàÊÕÂËÒÂ\n"
-"¡ÃسҵÃǨÊͺ cdrom ã¹à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃì·ÕèÁÕ¡ÒõԴµÑé§áÅéÇ\n"
-"â´Âãªé \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "ÂÔ¹´Õµé͹ÃѺÊÙè %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "äÁèÁÕä´ÃÇì¿ÅéÍ»»ÕçàËÅ×ÍÍÂÙè"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "à¢éÒÊÙè¢Ñ鹵͹ `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"à¤Ã×èͧ¢Í§¤Ø³ÁÕ·ÃѾÂҡäè͹¢éÒ§µèӤسÍÒ¨ÁջѭËÒµÔ´µÑé§ \n"
-"Mandrake Linux  ¶éÒà»ç¹àªè¹¹Ñé¹ ¡Ãسҷ´ÅͧµÔ´µÑé§áºº text \n"
-"¡Ãسҡ´ F1 ¢³Ð boot ¨Ò¡ cdrom áÅéǾÔÁ¾ì text"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "»ÃÐàÀ·¢Í§¡ÒõԴµÑé§"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "¡ÃسÒàÅ×Í¡ 1 ã¹ÇÔ¸Õ¡ÒõԴµÑ駴ѧµèÍ仹Õé"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "¢¹Ò´ÃÇÁ¢Í§ËÁÇ´·Õè¤Ø³àÅ×Í¡à¾×è͵ԴµÑé§ÁÕ¢¹Ò´»ÃÐÁÒ³ %d MB \n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"¶éҤسµéͧ¡ÒõԴµÑ駹éÍ¡ÇèÒ¢¹Ò´¹Õé\n"
-"¡ÃسÒàÅ×Í¡à»ÍÃìà«ç¹¡ÒõԴµÑ駷Õèµéͧ¡ÒÃ\n"
-"\n"
-"à»ÍÃìà«ç¹·ÕèµèÓ¹Ñé¹ËÁÒ¶֧ᾡࡨ·ÕèÊӤѭ·ÕèÊØ´à·èÒ¹Ñé¹\n"
-"·Õè¨Ð¶Ù¡µÔ´µÑé§\n"
-"100%% ËÁÒ¶֧·Ø¡ÍÂèÒ§¨Ð¶Ù¡µÔ´µÑé§"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¤Ø³ÁÕ¾×é¹·Õèá¤è %d%% ¢Í§á¾¡à¡¨\n"
-"\n"
-"¶éҤسµéͧ¡ÒõԴµÑ駹éÍ¡ÇèÒ¹Õé\n"
-"àÅ×Í¡à»ÍÃìà«ç¹¡ÒõԴµÑ駷Õè¤Ø³µéͧ¡ÒÃ\n"
-"à»ÍÃìà«ç¹·ÕèµèÓ¹Ñé¹ËÁÒ¶֧ᾡࡨ·ÕèÊӤѭ·ÕèÊØ´à·èÒ¹Ñé¹\n"
-"·Õè¨Ð¶Ù¡µÔ´µÑé§\n"
-"à»ÍÃìà«ç¹ %d%% ¨Ð·Ó¡ÒõԴµÑé§á¾¡à¡¨ÁÒ¡·ÕèÊØ´à·èÒ·Õè¨Ð·Óä´é"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "¤Ø³¨ÐµéͧàÅ×Í¡ãËé¶Ù¡µéͧÁÒ¡¢Öé¹ã¹¢Ñ鹵͹¶Ñ´ä» "
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "à»ÍÃìà«ç¹¡ÒõԴµÑé§á¾ç¤à¡ç¨"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "àÅ×Í¡¡ÅØèÁá¾ç¤à¡ç¨"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individual package selection"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "¢¹Ò´ÃÇÁ: %d / %d MB "
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "á¾ç¤à¡ç¨ªÓÃØ´"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "ª×èÍ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "àÇÍÃìªÑè¹: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "¢¹Ò´: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "¤ÇÒÁÊӤѭ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "¤Ø³äÁèÊÒÁÒöàÅ×Í¡ package ¹Õéà¹×èͧ¨Ò¡¤Ø³ÁÕ¾×é¹·ÕèäÁèà¾Õ§¾Í"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "á¾ç¤à¡ç¨àËÅèÒ¹Õé¡ÓÅѧ¨Ð¶Ù¡µÔ´µÑé§"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "á¾ç¤à¡ç¨àËÅèÒ¹Õé¡ÓÅѧ¨Ð¶Ù¡Åº"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "¤Ø³äÁèÊÒÁÒöàÅ×Í¡/äÁèàÅ×͡ᾡࡨ¹Õé"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "¹Õè¤×Íᾡࡨ·ÕèµéͧµÔ´µÑé§ äÁèÊÒÁÒöäÁèàÅ×Í¡"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "¤Ø³äÁèÊÒÁÒöäÁèàÅ×͡ᾡࡨ¹Õéà¾ÃÒÐÁѹä´é¶Ù¡µÔ´µÑé§ä»áÅéÇ"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"ᾡࡨ¹Õé¨Óà»ç¹µéͧ¶Ù¡ upgrade\n"
-"¤Ø³á¹èã¨ÇèÒ¨ÐäÁèàÅ×Í¡ÁѹËÃ×Í"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "¤Ø³äÁèÊÒÁÒöäÁèàÅ×͡ᾡࡨ¹Õé  Áѹ¨Óà»ç¹·Õè¨Ðµéͧ¶Ù¡ upgrade"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "µÔ´µÑé§"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "ºÑ¹·Ö¡Å§á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "ºÑ¹·Ö¡¡ÅØèÁá¾ç¤à¡ç¨·ÕèàÅ×Í¡"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "ÍÍ¡¨Ò¡¡ÒõԴµÑé§"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "¡ÓÅѧµÔ´µÑé§"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "¡ÒûÃÐàÁÔ¹"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "àÇÅÒ·ÕèàËÅ×Í "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "¡ÓÅѧàµÃÕÂÁ¡ÒõԴµÑé§"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "á¾ç¤à¡ç¨ %d ªØ´"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "ÂÍÁÃѺ"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "äÁèÂÍÁÃѺ"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"à»ÅÕè¹  CD-ROM\n"
-"\n"
-"¡ÃسÒãÊè CD-ROM \"%s\" áÅС´ OK\n"
-"¶éèҤسäÁèÁÕ ¡Ãسҡ´ ¡àÅÔ¡ (cancel) à¾×èÍËÅÕ¡àÅÕ觡ÒõԴµÑ駨ҡ CD-ROM ¹Õé"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "·Ó§Ò¹µèÍËÃ×ÍäÁè?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "ÁջѭËÒ¡ÒÃÅӴѺ¢Í§á¾ç¤à¡ç¨:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "ÁջѭËÒ¡ÒõԴµÑ駢ͧá¾ç¤à¡ç¨:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "ÁջѭËÒà¡Ô´¢Öé¹"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "¤Ø³µéͧ¡ÒÃàÃÔèÁ·Ó§Ò¹ Network ãËÁèËÃ×ÍäÁè"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "License agreement"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "¤ÕÂìºÍÃì´"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "¤Ø³µéͧ¡ÒÃàÅ×Í¡¤ÕÂìºÍÃì´àÅÂìàÍéÒ·ìẺ㴠"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "µèÍ仹Õé¤×Í keyboard ·Õèãªéä´é"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "¤Ø³µéͧ¡ÒõԴµÑ駻ÃÐàÀ·ã´"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "µÔ´µÑé§/ÍѾà¡Ã´ "
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "¹Õèà»ç¹¡ÒõԴµÑé§ËÃ×Í¡ÒÃÍѾà¡Ã´"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Ẻá¹Ð¹Ó (Recommended)"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ẻ¼ÙéàªÕèÂǪҭ (Expert)"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Update"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "ºÑ¹·Ö¡¡ÅØèÁá¾ç¤à¡ç¨·ÕèàÅ×Í¡"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "¤Ø³ÁÕàÁéÒÊ쪹Դã´"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "¾ÍÃ쵢ͧàÁéÒÊì"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "àÁéÒÊì¢Í§¤Ø³µèÍà¢éҡѺ¾ÍÃìµÍ¹Ø¡ÃÁã´"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "¡ÓÅѧ¤Í¹¿Ô¡¡ÒÃì´ PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "¤Í¹¿Ô¡ IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "äÁèÁÕ¾ÒÃìµÔªÑè¹àËÅ×Í"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Scanning partitions to find mount points"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "àÅ×Í¡¨Ø´àÁéÒ·ì"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"¼ÁäÁèÊÒÁÒöÍèÒ¹µÒÃÒ§¾ÒÃìµÔªÑè¹ä´é ÁѹàÊÕÂËÒÂÁÒ¡à¡Ô¹ä» \n"
-"¼ÁÊÒÁÒö¾ÂÒÂÒÁź¢éÍÁÙÅ¢éÍÁÙÅã¹¾ÒÃìµÔªÑè¹·ÕèàÊÕÂËÒÂ\n"
-"ÍÕ¡·Ò§àÅ×Í¡¤×ÍäÁèãËé DrakX ·Ó¡ÒÃà»ÅÕè¹á»Å§µÒÃÒ§\n"
-"¢éͤÇÒÁ¼Ô´¾ÅÒ´¤×Í %s\n"
-"\n"
-"¤Ø³á¹èã¨ÇèÒ¨ÐÂÍÁãËé¾ÒÃìµÔªÑè¹·Ñé§ËÁ´¶Ù¡Åºä»\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"´ÔÊ¡ìà´Ã¡ ÅéÁàËÅÇ·Õè¨ÐÍèÒ¹µÒÃÒ§¾ÒÃìµÔªÑè¹ãËé¶Ù¡µéͧ\n"
-"¶éÒ·Ó§Ò¹µèÍÍÒ¨ÁÕ¢éͼԴ¾ÅÒ´ä´é!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "àÅ×Í¡¾ÒÃìµÔªÑè¹·Õè¤Ø³µéͧ¡ÒÿÍÃìáÁµ"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "¾ÒÃìµÔªÑè¹ÃÙ·"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "¾ÒÃìµÔªÑè¹ã´à»ç¹ÃÙ·¾ÒÃìµÔªÑè¹ (/) ã¹Ãкº¢Í§¤Ø³"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "¤Ø³µéͧ·Ó¡ÒÃÃÕºÙµÃкºãËéà¤Ã×èͧÃѺ·ÃÒº¡ÒÃà»ÅÕè¹á»Å§µÒÃÒ§¾ÒÃìµÔªÑè¹"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "àÅ×Í¡¾ÒÃìµÔªÑè¹·Õè¤Ø³µéͧ¡ÒÿÍÃìáÁµ"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "µÃǨÊͺ bad blocks"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "¿ÍÃìáÁµ¾ÒÃìµÔªÑè¹"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "¡ÓÅѧÊÃéÒ§áÅÐ format ä¿Åì %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "äÁèÁÕ¾×é¹·ÕèÊÇÍ»à¾Õ§¾Í¡Ñº¡ÒõԴµÑé§ â»Ã´à¾ÔèÁà¹×éÍ·Õè"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "¡ÓÅѧËÒá¾ç¤à¡ç¨·ÕèÁÕÍÂÙè"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "¡ÓÅѧËÒá¾ç¤à¡ç¨·Õè¨Ð·Ó¡ÒÃÍѾà¡Ã´"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "à¤Ã×èͧ¢Í§¤Ø³äÁèÁÕà¹×éÍ·Õèà¾Õ§¾Í㹡ÒõԴµÑé§ËÃ×Í upgrade (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "·ÓàÊÃç¨ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "¢Ñé¹µèÓ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ẻá¹Ð¹Ó (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "àÃÕ¡¤×¹¨Ò¡á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "àÃÕ¡¤×¹¨Ò¡á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "àÅ×Í¡¡ÅØèÁá¾ç¤à¡ç¨"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "ºÑ¹·Ö¡Å§á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"¶éҤسÁÕ CD ·Ø¡ÍÂèÒ§ ¡´ OK\n"
-"¶éÒäÁèÁÕàÅ ¡´ ¡àÅÔ¡ (cancel)\n"
-"¶éÒÁÕá¤èºÒ§á¼è¹ àÅ×Í¡à·èÒ·ÕèÁÕáÅéÇ¡´ OK"
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom labeled \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "¡ÓÅѧàµÃÕÂÁ¡ÒõԴµÑé§"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "¡Òä͹¿Ô¡ËÅѧ¡ÒõԴµÑé§"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s "
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "¡ÓÅѧµÔ´µè͡ѺÁÔÅàÃÍÃì䫵ìà¾×èÍËÒÃÒ¡Òâͧá¾ç¤à¡ç¨·ÕèÁÕãËé"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "àÅ×Í¡ÁÔÅàÃÍÃì䫵ì·Õè¨Ðãªé㹡ÒôÒǹìâËÅ´á¾ç¤à¡ç¨"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "¡ÓÅѧµÔ´µè͡ѺÁÔÅàÃÍÃì䫵ìà¾×èÍËÒÃÒ¡Òâͧá¾ç¤à¡ç¨·ÕèÁÕãËé"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "¤Ø³ãªéÂèÒ¹àÇÅÒã´? "
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "¤Ø³µéͧ¡ÒÃãËéà«çµ¹ÒÌÔ¡ÒÎÒÃì´áÇÃìà»ç¹ GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "à«ÔÃì¿àÇÍÃì NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Remote CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "¤Ø³ÁÕÍѹÍ×è¹æÍÕ¡ËÃ×ÍäÁè?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "ÃÇÁ¤ÇÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "⫹àÇÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN card"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Sound card"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV card"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "ãªé NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "à«çµÃËÑʼèÒ¹ÃÙ·"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "äÁèÁÕÃËÑʼèÒ¹"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "ÃËÑÊÅѺ§èÒÂà¡Ô¹ä» (µéͧÁÕÍÂèÒ§¹éÍ %d µÑÇÍÑ¡ÉÃ)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "¡ÒõÃǨÊͺÊÔ·¸Ôì¡ÒÃãªé§Ò¹"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "¡ÒõÃǨÊͺÊÔ·¸Ôì¡ÒÃãªé§Ò¹"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "à«ÔÃì¿àÇÍÃì NIS"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "¡ÒõÃǨÊͺÊÔ·¸Ôì¡ÒÃãªé§Ò¹¢Í§ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "â´àÁ¹ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "à«ÔÃì¿àÇÍÃì NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"ºÙµ´ÔÊ¡ìẺá¡éä¢ä´éµÒÁ¤ÇÒÁµéͧ¡Òâͧ¼Ùéãªé ¨ÐªèÇÂãËé¤Ø³ÊÒÁÒöºÙµÃкºÅչء«ì\n"
-"äÁèµéͧà¢éÒÊÙè¡Ãкǹ¡ÒâͧºÙµâËÅ´à´ÍÃìµÒÁ»¡µÔ «Ö觨Ðà»ç¹»ÃÐ⪹ìÁÒ¡ËÒ¡¤Ø³\n"
-"äÁèä´éµÔ´µÑé§ LILO ŧã¹Ãкº¢Í§¤Ø³ ËÃ×ÍËÒ¡ LILO ¶Ù¡ÅºÍÍ¡ä»à¹×èͧ¨Ò¡ÁÕ¡ÒÃ\n"
-"Ãкº»¯ÔºÑµÔ¡ÒÃẺÍ×è¹æ ËÃ×Í LILO äÁè·Ó§Ò¹¡Ñº¡Òä͹¿Ô¡ÎÒÃì´áÇÃì á¼è¹ºÙµ´ÔÊ¡ì\n"
-"¨ÐÊÒÁÒöãªé¡ÑºÍÔÁàÁ¨¡Ùé¤×¹Ãкº¢Í§áÁ¹à´Ãç¡ «Ö觨ЪèÇÂãËé¤Ø³ÊÒÁÒö·Ó¡ÒáÙé\n"
-"¤×¹Ãкº¨Ò¡¤ÇÒÁ¼Ô´¾ÅÒ´ä´é´éÇ ¤Ø³µéͧ¡ÒèÐÊÃéÒ§á¼è¹ºÙµËÃ×ÍäÁè?\n"
-"¶éÒãªè ¡ÃسÒãÊèá¼è¹ Diskette áÅС´ \"OK\""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Floppy Drive à¤Ã×èͧáá"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Floppy Drive à¤Ã×èͧ·ÕèÊͧ"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "¢éÒÁä»"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"ºÙµ´ÔÊ¡ìẺá¡éä¢ä´éµÒÁ¤ÇÒÁµéͧ¡Òâͧ¼Ùéãªé ¨ÐªèÇÂãËé¤Ø³ÊÒÁÒöºÙµÃкºÅչء«ì\n"
-"äÁèµéͧà¢éÒÊÙè¡Ãкǹ¡ÒâͧºÙµâËÅ´à´ÍÃìµÒÁ»¡µÔ «Ö觨Ðà»ç¹»ÃÐ⪹ìÁÒ¡ËÒ¡¤Ø³\n"
-"äÁèä´éµÔ´µÑé§ LILO ŧã¹Ãкº¢Í§¤Ø³ ËÃ×ÍËÒ¡ LILO ¶Ù¡ÅºÍÍ¡ä»à¹×èͧ¨Ò¡ÁÕ¡ÒÃ\n"
-"Ãкº»¯ÔºÑµÔ¡ÒÃẺÍ×è¹æ ËÃ×Í LILO äÁè·Ó§Ò¹¡Ñº¡Òä͹¿Ô¡ÎÒÃì´áÇÃì á¼è¹ºÙµ´ÔÊ¡ì\n"
-"¨ÐÊÒÁÒöãªé¡ÑºÍÔÁàÁ¨¡Ùé¤×¹Ãкº¢Í§áÁ¹à´Ãç¡ «Ö觨ЪèÇÂãËé¤Ø³ÊÒÁÒö·Ó¡ÒáÙé\n"
-"¤×¹Ãкº¨Ò¡¤ÇÒÁ¼Ô´¾ÅÒ´ä´é´éÇ ¤Ø³µéͧ¡ÒèÐÊÃéÒ§á¼è¹ºÙµËÃ×ÍäÁè? \n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "¢ÍÍÀÑ äÁèÁÕ¿ÅéÍ»»Õéä´ÃÇìàÅÂ"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ãËéàÅ×Í¡¿ÅéÍ»»Õéä´ÃÇì·Õè¤Ø³µéͧ¡Ò÷Óà»ç¹á¼è¹ºÙµ"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "¡ÓÅѧÊÃéÒ§á¼è¹ºÙµ"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "¡ÓÅѧàµÃÕÂÁºÙµâËÅ´à´ÍÃì"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "¤Ø³µéͧ¡ÒÃãªé aboot ËÃ×ÍäÁè"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"¡ÒõԴµÑé§ aboot ÅéÁàËÅÇ\n"
-"¾ÂÒÂÒÁµÔ´µÑ駶֧áÁé¾ÒµÔªÑè¹ááÍÒ¨¨ÐàÊÕÂËÒÂ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "µÔ´µÑ駺ٵâËÅ´à´ÍÃì"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "¡ÒõԴµÑé§ bootloader ÅéÁàËÅÇ µèÍ仹Õéà»ç¹¢éͼԴ¾ÅÒ´·Õèà¡Ô´¢Öé¹"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ãËéãÊèá¼è¹¿ÅéÍ»»Õéŧã¹ä´ÃÇì %s "
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "¡ÓÅѧàµÃÕÂÁ¡ÒõԴµÑé§Å§º¹ floppy"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"¢Ñ鹵͹ºÒ§¢Ñ鹵͹äÁèÊÁºÙóì\n"
-"\n"
-"¤Ø³µéͧ¡ÒÃÍÍ¡¨Ò¡¡ÒõԴµÑ駨ÃÔ§æËÃ×ÍäÁè?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"¢ÍáÊ´§¤ÇÒÁÂÔ¹´Õ ¡ÒõԴµÑé§àÊÃç¨àÃÕºÃéÍÂ\n"
-"ãËéàÍÒÊ×èÍ·ÕèãªéºÙµÍÍ¡¨Ò¡ä´ÃÇì (á¼è¹¿ÅéÍ»»ÕéËÃ×Í«Õ´Õ) ¡´»ØèÁÃÕà·ÔÃì¹à¾×èÍÃÕºÙµ\n"
-"\n"
-"\n"
-"ÊÓËÃѺ·èÒ¹·Õèµéͧ¡ÒâéÍÁÙÅÊÓËÃѺ¡ÒÃá¡é䢡Ѻ Åչء«ì-áÁ¹à´Ã¡\n"
-"â»Ã´ÍèÒ¹ Errata ä´é·Õè \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"¢éÍÁÙÅÊÓËÃѺ¡Òä͹¿Ô¡Ãкº¢Í§¤Ø³ ÊÒÁÒöËÒä´é¨Ò¡ªèǧ\n"
-"º·ËÅѧ¨Ò¡¡ÒõԴµÑ駢ͧ¤ÙèÁ×Íá¹Ð¹Ó¼Ùéãªé§Ò¹Åչء«ì-áÁ¹à´Ã¡©ºÑºà»ç¹·Ò§¡ÒÃ"
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "ÊÃéÒ§floppyÊÓËÃѺ¡ÒõԴµÑé§áººÍÍâµàÁµÔ¡"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"¡ÒõԴµÑé§áººÍÍâµàÁµÔ¡ÊÒÁÒö·Ó§Ò¹áººàµçÁÃٻẺËÒ¡µéͧ¡ÒÃ\n"
-"㹡óչÑé¹Áѹ¨Ðãªé harddisk  ·Ñé§ËÁ´\n"
-"(ÁѹàËÁÒСѺ¡ÒõԴµÑ駺¹à¤Ã×èͧÍ×è¹)\n"
-"¤Ø³ÍÒ¨ÍÂÒ¡¡ÅѺä»àÃÔèÁµé¹µÔ´µÑé§ãËÁè\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Íѵâ¹ÁѵÔ"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "àÃÕ¡ÍÕ¡¤ÃÑé§"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "ºÑ¹·Ö¡¡ÅØèÁá¾ç¤à¡ç¨·ÕèàÅ×Í¡"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "¡ÒõԴµÑé§Åչء«ì-áÁ¹à´Ã¡ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> ÃÐËÇèÒ§µÑÇàÅ×Í¡ | <Space> àÅ×Í¡ | <F12> ˹éÒ¶Ñ´ä» "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "äÁèÁÕ kdesu "
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "àÅ×Í¡¡Ô¨¡ÃÃÁ"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Advanced"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "â»Ã´ÃÍÊÑ¡¤ÃÙè"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "¢éÍÁÙÅ"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "¢ÂÒ tree"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "导 tree"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "à»ÅÕè¹ä»ÁÒÃÐËÇèÒ§¡ÒèѴàÃÕ§Ẻ flat ËÃ×Í group"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "µÑÇàÅ×Í¡¼Ô´¾ÅÒ´ â»Ã´·´ÅͧÍÕ¡¤ÃÑé§\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "µÑÇàÅ×Í¡¢Í§¤Ø³? (¤èÒµÑé§µé¹ %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "µÑÇàÅ×Í¡¢Í§¤Ø³? (¤èÒµÑé§µé¹ %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "¾ÒÃìµÔªÑè¹ %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "¤Ø³µéͧ¡ÒÃãªé aboot ËÃ×ÍäÁè"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "µÑÇàÅ×Í¡¢Í§¤Ø³? (¤èÒµÑé§µé¹ %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "તâ¡ÊâÅÇÒà¡Õ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "àÂÍÃÁѹ"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Ê໹"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "¿Ô¹áŹ´ì"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "½ÃÑè§àÈÉ"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "¹ÍÃìàÇÂì"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "â»áŹ´ì"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "ÃÑÊà«ÕÂ"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "ÊÇÕà´¹"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Íѧ¡ÄÉ"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "ÍàÁÃÔ¡Ò"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iranian"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "ÍÒÃìàÁà¹Õ¹ (à¡èÒ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "ÍÒÃìàÁà¹Õ¹ (¾ÔÁ¾ì´Õ´)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "ÍÒÃìàÁà¹Õ¹ (â¿à¹µÔ¤)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "àºÅàÂÕèÂÁ"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "ÍÒÃìàÁà¹Õ¹ (â¿à¹µÔ¤)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "ºÑÅ¡ÒàÃÕÂ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "ºÃÒ«ÔÅ"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "ÊÇÔÊ (àÅÂìàÍéÒ·ìµÒÁàÂÍÃÁѹ)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "ÊÇÔÊ (àÅÂìàÍéÒ·ìµÒÁ½ÃÑè§àÈÉ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "તâ¡ÊâÅÇÒà¡Õ (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "German (no dead keys)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "à´¹ÁÒÃì¡"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonian"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "¨ÍÃìà¨Õ (àÅÂìàÍéÒ·ìẺÃÑÊà«ÕÂ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "¨ÍÃìà¨Õ (àÅÂìàÍéÒ·ìẺÅеԹ)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "¡ÃÕ¡"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Íѧ¡ÒÃÕ"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croatian"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "ÍÔÊÃÒàÍÅ"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "ÍÔÅÃÒàÍÅ (â¿à¹µÔ¤)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranian"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "äÍ«ìᏴì"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "ÍÔµÒÅÕ"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanese 106 keys"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korean keyboard"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "ÅеԹÍàÁÃÔ¡Ò"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuanian AZERTY (old)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuanian AZERTY (new)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ÅÔ¸ÑÇà¹Õ \"á¶ÇµÑÇàÅ¢\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ÅÔ¸ÑÇà¹Õ \"â¿à¹µÔ¤\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "µÓá˹è§"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonian"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "ÎÍÅᏴì"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polish (qwerty layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polish (qwertz layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "â»ÃµØà¡Ê"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "¤Ò¹Ò´Ò (¤ÇÔ຤)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "ÃÑÊà«ÕÂ (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "ÃÑÊà«ÕÂ (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "ÃÑÊà«ÕÂ (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "ÊâÅÇÒà¹ÕÂ"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "ÊâÅÇÒà¡Õ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "ÊâÅÇÒà¡Õ (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjani (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Table"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "ä·Â"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "ä·Â"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "µØÃ¡Õ (âÁà´ÅẺἹ \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "µØÃ¡Õ (âÁà´ÅÊÁÑÂãËÁè \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ÂÙà¤Ã¹"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "¤ÕÂìºÍÃì´ÍàÁÃԡѹ (¹Ò¹ÒªÒµÔ)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "ÂÙâ¡ÊÅÒàÇÕ (àÅÂìàÍéÒ·ìẺÅеԹ)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circular mounts %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "ź logical volume ¡è͹\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 »ØèÁ"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generic"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wheel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "¾ÍÃìµÍ¹Ø¡ÃÁ"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "àÁéÒÊìẺ»¡µÔ·Õèãªé§Ò¹ÊÒÁ»ØèÁ"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (¾ÍÃìµÍ¹Ø¡ÃÁ, Ẻà¡èÒ C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 buttons"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 buttons"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "äÁèÁÕ"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "äÁèÁÕàÁéÒÊì"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "¡Ãسҷ´ÊͺàÁéÒÊì"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "à¾×èÍãËéàÁéÒÊì·Ó§Ò¹"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "àÅ×è͹Åéͧ͢¤Ø³"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "¿Ô¹áŹ´ì"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Next ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ¡è͹"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "¶Ù¡µéͧËÃ×ÍäÁè?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "µèÍà¢éÒ Internet "
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"¡ÒõԴµèÍâ´Â·ÑèÇ仢ͧ adsl ¤×Í pppoe.\n"
-"ºÒ§¤ÃÑé§ÍÒ¨ãªé  pptp ÁÕ¹éͤ¹·Õèãªé  dhcp.\n"
-"¶éҤسäÁè·ÃÒº àÅ×Í¡ 'use pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ãªé dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "ãªé pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "ãªé pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ª¹Ô´¢Í§ dhcp client ·Õèµéͧ¡ÒÃãªé¤×ÍÍÐäÃ\n"
-"¡ÒÃàÅ×Í¡àº×éͧµé¹¤×Í dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"äÁ辺¡ÒÃì´ ethernet \n"
-"¼ÁäÁèÊÒÁÒö¨Ñ´·Ó¡ÒõԴµèͪ¹Ô´¹Õé"
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "àÅ×Í¡ network interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "¡ÃسÒàÅ×Í¡ Network Adaptor ÊÓËÃѺ¡ÒõèÍà¢éÒ Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "äÁ辺¡ÒÃì´à¹çµàÇÔÃì¡"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "¡ÓÅѧ¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"â»Ã´ãÊèª×èͧ͢âÎʵì\n"
-"ª×èͧ͢âÎʵì¤ÇÃãÊèàµçÁÃٻẺ (ÃÇÁª×èÍâ´àÁ¹´éÇÂ)\n"
-"µÑÇÍÂèÒ§àªè¹ ``mybox.mylab.yco.com''\n"
-"¤Ø³ÍÒ¨¨ÐãÊè¤èÒ IP ¢Í§à¡µàÇÂì´éǶéҤسÁÕà¤Ã×èͧ·Õè·Ó˹éÒ·Õèà»ç¹à¡µàÇÂìÍÂÙè"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "ª×èÍâÎʵì:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Network Configuration Wizard"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "External ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internal ISDN card"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "¡ÒõԴµèÍẺ ISDN ¢Í§¤Ø³à»ç¹áººã´"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "µÃǨ¾º¤Í¹¿Ô¡¢Í§ Firewall"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "µÃǨ¾º¤Í¹¿Ô¡¢Í§ Firewall"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "¡Òä͹¿Ô¡ ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"àÅ×Í¡¼ÙéãËéºÃÔ¡ÒÃ\n"
-"¶éÒäÁèÁÕàÅ×Í¡ äÁèÁÕ (unlisted)"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Boot Protocol"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "ÂØâû (EDS11)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Rest of the world"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Rest of the world \n"
-" no D-Channel (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Protocol ä˹·Õè¤Ø³µéͧ¡ÒÃ"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "¤Ø³ÁÕ¡ÒÃì´ª¹Ô´ã´?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "¼ÁäÁè·ÃÒº"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"¶éҤسÁÕ ¡ÒÃì´ ISA µÑÇàÅ¢ã¹Ë¹éÒµèÍ令Çèж١µéͧÍÂÙèáÅéÇ\n"
-"\n"
-"¶éҤسÁÕ¡ÒÃì´ PCMCIA ¤Ø³µéͧÃÙé irq áÅÐ io ¢Í§¡ÒÃ촢ͧ¤Ø³\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "àÅÔ¡"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "·Ó§Ò¹µèÍËÃ×ÍäÁè?"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "¤Ø³ãªé¡ÒÃì´ ISDN ã´?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr "¼Áà¨Í¡ÒÃì´ ISDN Ẻ PCI áµè¼ÁäÁè·ÃÒºª¹Ô´ ¡ÃسÒàÅ×͡˹×è§ã¹¡ÒÃì´ PCI ã¹Ë¹éÒµèÍä»"
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "äÁ辺¡ÒÃì´ ISDN PCI  ¡ÃسÒàÅ×Í¡¨Ò¡Ë¹éÒµèÍä»"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "¤Ø³µéͧ¡ÒÃãËéâÁà´çÁ¢Í§¤Ø³µè͡Ѻ¾ÍÃìµÍ¹Ø¡ÃÁã´?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "ÍçÍ»ªÑ蹢ͧ¡ÒÃËÁعâ·ÃÈѾ·ì"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "ª×èÍ¡ÒÃàª×èÍÁµèÍ"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "ËÁÒÂàÅ¢â·ÃÈѾ·ì"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ËÁÒÂàÅ¢»ÃШӵÑÇ¡ÒÃÅçÍ¡ÍÔ¹"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "ÃٻẺʤÃÔ»µì"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "ÃٻẺà·ÍÃìÁÔ¹ÍÅ"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "ª×èÍâ´àÁ¹"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "à«ÔÿìàÇÍÃì DNS à¤Ã×èͧáá (optional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "à«ÔÿìàÇÍÃì DNS à¤Ã×èͧ·ÕèÊͧ (optional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒöàÅÔ¡µÔ´µèÍËÃ×Í·Ó¡ÒûÃѺáµè§¡ÒõԴµèͧ͢¤Ø³ãËÁè"
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒö¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡ãËÁè"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "¤Ø³µÔ´µè͡Ѻ Internet ÍÂÙè"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒöàª×èÍÁµèÍ Internet ËÃ×Í·Ó¡ÒÃá¡é㢡ÒÃàª×èÍÁµèÍãËÁè"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "¤Ø³ÂѧäÁèä´éµè͡Ѻ Internet ÍÂÙè"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "àª×èÍÁµèÍÍÂÙè"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "¡àÅÔ¡µÔ´µèÍ..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "¡ÒÃàª×èÍÁµèÍ Internet áÅСÒûÃѺáµè§"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒöàÅÔ¡µÔ´µèÍËÃ×Í·Ó¡ÒûÃѺáµè§¡ÒõԴµèͧ͢¤Ø³ãËÁè"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"¤Ø³ÊÒÁÒöàÅÔ¡µÔ´µèÍËÃ×Í·Ó¡ÒûÃѺáµè§¡ÒõԴµèͧ͢¤Ø³ãËÁè"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"à¹×èͧ¨Ò¡¤Ø³ãªé¡ÒõԴµÑé§áºº network Ãкº network ¨Ö§ãªéä´éÍÂÙèáÅéÇ\n"
-"¡´ OK à¾×èÍÃÑ¡ÉÒ¤èҤ͹¿Ô¡à´ÔÁäÇé ËÃ×ÍàÅ×Í¡ ¡àÅÔ¡à¾×èÍ»ÃѺáµè§ãËÁè\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"ÂÔ¹´Õµé͹ÃѺÊÙè Network Configuration Wizard\n"
-"\n"
-"àÃÒ¡ÓÅѧ¨Ð»ÃѺáµè§ internet/network \n"
-"¶éҤسäÁèµéͧ¡Òà auto detection ¡ÃسÒ¡àÅÔ¡ checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "àÅ×Í¡ profile ·Õè¨Ð»ÃѺáµè§"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "ãªé auto detection"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "¡ÓÅѧµÃǨÊͺÍØ»¡Ã³ì..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "¡ÒõԴµèÍâ´Âãªé Modem ¸ÃÃÁ´Ò"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "¤é¹ËÒà¨Íº¹ port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "¡ÒõԴµèÍâ´Âãªé ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "¤é¹¾º %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN connection"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "¤é¹ËÒà¨Íº¹ interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "cable connection"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "cable connection"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN connection"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet card(s) ·Õ辺"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "àÅ×Í¡à¤Ã×èͧÁ×Í·Õè¤Ø³µéͧ¡ÒÃãªé"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "¤Ø³µéͧ¡Òõè͵͹ boot ËÃ×ÍäÁè"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "¤Ø³µéͧ¡ÒÃàÃÔèÁ·Ó§Ò¹ Network ãËÁèËÃ×ÍäÁè"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"¡ÒûÃѺáµè§ internet/network àÃÕºÃéÍÂáÅéÇ\n"
-"\n"
-"¤èÒµèÒ§æ¨Ð¶Ù¡¹Óä»ãªéà´ÕëÂǹÕé\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"àÁ×èÍ·Ø¡ÍÂèÒ§àÊÃç¨ÊÔé¹ ¼Áá¹Ð¹ÓãËé·èÒ¹àÃÔèÁ·Ó§Ò¹ X windows ãËÁè\n"
-"à¾×èÍ»éͧ¡Ñ¹»Ñ­ËÒ hostname ·ÕèÍÒ¨à¡Ô´¢Öé¹ä´é"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"¤Óàµ×͹: ÍØ»¡Ã³ì¹Õéä´é¶Ù¡»ÃѺáµè§ãËéãªé㹡ÒõèÍà¢éÒ internet\n"
-"¤Ø³ÊÒÁÒöÂÍÁÃѺ¤èÒµèÒ§æËÃ×Í·Ó¡ÒÃá¡é㢤èÒµèÒ§æ¢éÒ§ÅèÒ§¹Õé\n"
-" "
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"â»Ã´¡ÃÍ¡¢éÍÁÙÅ¡Òä͹¿Ô¡¤èÒ IP ÊÓËÃѺà¤Ã×èͧ¹Õé\n"
-"¢éÍÁÙÅáµèÅÐÍÂèÒ§ÊÒÁÒöãÊèà¢éÒä»ä´éâ´Âãªé¤èÒ IP ã¹ÃٻẺµÑÇàÅ¢¤Ñè¹´éǨش\n"
-"(dotted-decimal notation) µÑÇÍÂèÒ§àªè¹ 1.2.3.4"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "¡ÓÅѧ¤Í¹¿Ô¡ÍØ»¡Ã³ìà¹çµàÇÔÃì¡ %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "¤èÒ IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "à¹çµÁÒÊ¡ì"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "¡Ó˹´¤èÒ IP ẺÍѵâ¹ÁѵÔ"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "¤èҢͧ IP ¤ÇÃÍÂÙèã¹ÃٻẺ 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"â»Ã´ãÊèª×èͧ͢âÎʵì\n"
-"ª×èͧ͢âÎʵì¤ÇÃãÊèàµçÁÃٻẺ (ÃÇÁª×èÍâ´àÁ¹´éÇÂ)\n"
-"µÑÇÍÂèÒ§àªè¹ ``mybox.mylab.yco.com''\n"
-"¤Ø³ÍÒ¨¨ÐãÊè¤èÒ IP ¢Í§à¡µàÇÂì´éǶéҤسÁÕà¤Ã×èͧ·Õè·Ó˹éÒ·Õèà»ç¹à¡µàÇÂìÍÂÙè"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "à«ÔÃì¿àÇÍÃì DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "ÍØ»¡Ã³ìࡵàÇÂì"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "¡Òä͹¿Ô¡ Proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "¤èҢͧ Proxy ¤ÇèÐà»ç¹ http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "¤èҢͧ Proxy ¤ÇèÐà»ç¹ ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "¤Ø³µéͧ¡Ò÷´ÊͺµèÍà¢éÒ Internet à´ÕëÂǹÕéËÃ×ÍäÁè"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "·´Êͺ connection..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "µÔ´µèÍà¢éÒ Internet àÃÕºÃéÍÂ"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "à¾×èͤÇÒÁ»ÅÍ´ÀÑ Áѹ¨ÐËÂØ´¡ÒõԴµèÍà´ÕëÂǹÕé"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"äÁèÊÒÁÒöµèÍà¢éÒ Internet \n"
-"Åͧ·Ó¡Òä͹¿Ô¡ãËÁèÍÕ¡¤ÃÑé§"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "¡Òä͹¿Ô¡ Connection"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "¡ÃسÒàÅ×Í¡ªèͧ¢éÒ§ÅèÒ§¹Õé"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Card IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Card IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Card IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Card IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "àºÍÃìâ·ÃÈѾ·ìÊèǹµÑÇ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "ª×èͼÙéãËéºÃÔ¡Òà (ex KSC)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "ËÁÒÂàÅ¢â·ÃÈѾ·ì"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "¼ÙéãËéºÃÔ¡Òà dns 1 (optional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "¼ÙéãËéºÃÔ¡Òà dns 2 (optional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "àÅ×Í¡¤ÕÂìºÍÃì´"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "¡ÒÃËÁعâ·ÃÈѾ·ì´éÇÂâÁà´çÁ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Account Login (user name)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "ÃËÑʼèÒ¹"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "¡ÒÃàÁéÒ·ìÅéÁàËÅÇ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended partition not supported on this platform"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"¤Ø³ÁÕªèͧÇèҧ㹵ÒÃÒ§¾ÒÃìµÔªÑè¹  áµèâ»Ãá¡ÃÁ¨ÐäÁèãªé§Ò¹ªèͧÇèÒ§¹Ñé¹\n"
-"¡ÒÃá¡é䢻ѭËÒÊÒÁÒö·Óä´éâ´ÂÂéÒÂä¾ÃÁÒÃÕ¾ÒÃìµÔªÑè¹ à¾×èÍãËéªèͧÇèÒ仵èÍ·éÒ¾ÒÃìµÔªÑè¹áºº extended"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "¡ÒáÙé¤×¹¨Ò¡ä¿Åì %s ÅéÁàËÅÇ: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "¢éͼԴ¾ÅÒ´¶Ù¡ºÑ¹·Ö¡ã¹ä¿Åì %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ÁÕÊÔè§äÁè´Õà¡Ô´¢Ö鹡Ѻ disk ¢Í§¤Ø³«Öè§àÃÒäÁèÊÒÁÒöµÃǨ\n"
-"Êͺ¤ÇÒÁ¶Ù¡µéͧ¢Í§¢éÍÁÙÅä´é\n"
-"¹Ñè¹ËÁÒ¤ÇÒÁÇèÒ¡ÒÃà¢Õ¹¢éÍÁÙÅŧä»ÍÒ¨¡ÅÒÂà»ç¹¢ÂÐ"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "µéͧÁÕ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "ÊӤѭ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "´ÕÁÒ¡"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "´Õ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ÍÒ¨¨Ð"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Remote CUPS server"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "ÃÕâÁµ lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìã¹Ãкº Network (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/ÇÔ¹â´ÇÊì 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "ª×èÍà«ÔÃì¿àÇÍÃì¢Í§¾ÃÔ¹àµÍÃì"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "¢éͼԴ¾ÅÒ´¶Ù¡ºÑ¹·Ö¡ã¹ä¿Åì %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(âÁ´ÙÅ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "¤èÒ IP ¢Í§ CUPS à«ÔÃì¿àÇÍÃì"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìàª×èÍÁµèÍÍÂèÒ§äÃ?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"àÇÅÒãªé CUPS SERVER ¤Ø³äÁè¨Óà»ç¹µéͧ»ÃѺáµè§à¤Ã×èͧ¾ÔÁ¾ì\n"
-"㹵͹¹Õé  à¤Ã×èͧ¾ÔÁ¾ì¨Ð¶Ù¡¤é¹ËÒàͧ\n"
-"¡Ã³ÕÁÕ¢éÍʧÊÑ ¡ÃسÒàÅ×Í¡ \"Remote CUPS server\""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Remote CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "¤èҢͧ IP ¤ÇÃÍÂÙèã¹ÃٻẺ 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Port number ¤ÇÃà»ç¹µÑÇàÅ¢"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "¤èÒ IP ¢Í§ CUPS à«ÔÃì¿àÇÍÃì"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Boot Style Configuration"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "¡ÓÅѧµÃǨÊͺÍØ»¡Ã³ì..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "¡ÓÅѧµÃǨÊͺ¾ÍÃìµ"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "ãªé auto detection"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "¤é¹¾º %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "¤Ø³µéͧ¡ÒÃãËéâÁà´çÁ¢Í§¤Ø³µè͡Ѻ¾ÍÃìµÍ¹Ø¡ÃÁã´?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "¡Òä͹¿Ô¡"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"ËÒ¡¤Ø³µéͧ¡ÒÃãªé¤ÔÇà¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ· ¤Ø³¨Ðµéͧ»é͹¢éÍÁÙÅ\n"
-"¢Í§ª×èÍâÎʵì·ÕèãËéºÃÔ¡ÒÃà¤Ã×èͧ¾ÔÁ¾ì¹Ñé¹ áÅЪ×èͤÔǢͧà«ÔÃì¿àÇÍÃì¹Ñé¹\n"
-"«Öè§à»ç¹·Õèæ§Ò¹¾ÔÁ¾ì¨Ð¶Ù¡à¡çºäÇé"
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "ª×èÍâÎʵìÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "ª×èÍâÎʵìÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "ª×èÍâÎʵìÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìẺ SMB (à¤Ã×èͧ¾ÔÁ¾ìã¹ÃкºÇÔ¹â´ÇÊì 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"à¾×èÍãËé¤Ø³ÊÒÁÒöãªéà¤Ã×èͧ¾ÔÁ¾ì SMB ä´é ¤Ø³¨ÐµéͧãÊè¢éÍÁÙŢͧª×èÍâÎʵì·Õè\n"
-"à»ç¹ SMB (â»Ã´ÊѧࡵØÇèÒ ª×èÍâÎʵìẺ SMB ÍҨᵡµèÒ§¨Ò¡ª×èÍâÎʵì\n"
-"Ẻ TCP/IP) áÅТéÍÁÙŤèÒ IP áÍ´à´Ãʢͧ¾ÃÔ¹µìà«ÔÃì¿àÇÍÃì ÃÇÁ·Ñé§\n"
-"ª×èͧ͢à¤Ã×èͧ¾ÔÁ¾ì·Õèµéͧ¡ÒÃãªé (share name) áÅЪ×èͧ͢¼Ùéãªé (username)\n"
-"ÃËÑʼèÒ¹ (password) áÅТéÍÁÙŢͧàÇÔÃ줡ÃØê» (workgroup) ´éÇÂ"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "ª×èÍâÎʵì¢Í§ SMB server"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "¤èÒ IP ¢Í§ SMB à«ÔÃì¿àÇÍÃì"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "ª×èÍ·Õèãªé㹡ÃØê» (sharename)"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "àÇÔÃì¡¡ÃØê» (workgroup)"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìã¹Ãкºà¹çµáÇÃì"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"à¾×èÍãËé¤Ø³ÊÒÁÒöãªéà¤Ã×èͧ¾ÔÁ¾ìã¹Ãкºà¹çµáÇÃì ¤Ø³¨Ðµéͧ»é͹¢éÍÁÙÅ\n"
-"¢Í§ª×è;ÃÔ¹µìà«ÔÃì¿àÇÍÃìã¹Ãкºà¹çµáÇÃì (ª×èÍ·Õè»é͹à¢éÒä»ÍÒ¨äÁèãªèª×èͧ͢\n"
-"âÎʵìẺ TCP/IP) áÅТéÍÁÙŪ×èͤÔǢͧà¤Ã×èͧ¾ÔÁ¾ì·Õèµéͧ¡ÒÃãªé\n"
-"ÃÇÁ·Ñ駪×èͼÙéãªéáÅÐÃËÑʼèÒ¹´éÇÂ"
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "ª×èÍà«ÔÃì¿àÇÍÃì¢Í§¾ÃÔ¹àµÍÃì"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "ª×è;ÃÔ¹µì¤ÔÇ"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "ÍçÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "ª×èͧ͢à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "ª×èͧ͢à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "ª×èÍà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "ÃÒÂÅÐàÍÕ´"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "µÓá˹è§"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "¶Ù¡µéͧËÃ×ÍäÁè?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "¤Ø³ÁÕà¤Ã×èͧ¾ÔÁ¾ìª¹Ô´ã´?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "¤Ø³µéͧ¡ÒþÔÁ¾ì·´ÊͺËÃ×ÍäÁè?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "¡ÓÅѧµÃǨÊͺ¾ÍÃìµ"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "ãªé ãËé¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ·Ñé§ÊͧẺ"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "à¤Ã×èͧÁÕÍ Standard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"á¼è¹·´Êͺ¡ÒþÔÁ¾ìä´é¶Ù¡Êè§ä»·Õèà¤Ã×èͧ¾ÔÁ¾ìáÅéÇ\n"
-"¡ÃسÒÃÍÊÑ¡¤ÃÙè\n"
-"ʶҹСÒþÔÁ¾ì:\n"
-"%s\n"
-"\n"
-"Áѹ·Ó§Ò¹¶Ù¡µéͧãËÁ¤ÃѺ"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"á¼è¹·´Êͺ¡ÒþÔÁ¾ìä´é¶Ù¡Êè§ä»·Õèà¤Ã×èͧ¾ÔÁ¾ìáÅéÇ\n"
-"¡ÃسÒÃÍÊÑ¡¤ÃÙè\n"
-"Áѹ·Ó§Ò¹¶Ù¡µéͧãËÁ¤ÃѺ"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Mouse"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ãкºà¹çµàÇÔÃì¡¡ÓÅѧ¨ÐËÂØ´·Ó§Ò¹"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ãкºà¹çµàÇÔÃì¡¡ÓÅѧ¨ÐËÂØ´·Ó§Ò¹"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "¡Òä͹¿Ô¡"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "·´Êͺ connection..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "äÁèÁÕ¡Òä͹¿Ô¡¨ÍÀÒ¾"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "¡ÓÅѧ¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "»ÃÐàÀ·¢Í§¡ÒþÔÁ¾ìª¹Ô´ä˹·Õè¤Ø³µéͧ¡ÒÃ"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "ÊÙ§"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "»ÃÐàÀ·¢Í§¡ÒþÔÁ¾ìª¹Ô´ä˹·Õè¤Ø³µéͧ¡ÒÃ"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "»ÃÐàÀ·¢Í§¡ÒþÔÁ¾ìª¹Ô´ä˹·Õè¤Ø³µéͧ¡ÒÃ"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "¡Òä͹¿Ô¡à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "¡Òä͹¿Ô¡à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "¤Ø³µéͧ¡Òä͹¿Ô¡à¤Ã×èͧ¾ÔÁ¾ì´éÇÂËÃ×ÍäÁè"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"µèÍ仹Õéà»ç¹¢éÍÁÙÅÃÍ¡ÒþÔÁ¾ì\n"
-"¤Ø³ÊÒÁÒöà¾ÔèÁ¢éÍÁÙÅËÃ×Íá¡é䢢éÍÁÙÅ·ÕèÁÕä´é"
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"µèÍ仹Õéà»ç¹¢éÍÁÙÅÃÍ¡ÒþÔÁ¾ì\n"
-"¤Ø³ÊÒÁÒöà¾ÔèÁ¢éÍÁÙÅËÃ×Íá¡é䢢éÍÁÙÅ·ÕèÁÕä´é"
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "âËÁ´¸ÃÃÁ´Ò"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "¤Ø³µéͧ¡Ò÷´Êͺ¡Òä͹¿Ô¡ËÃ×ÍäÁè"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "¤Ø³µéͧ¡Ò÷´Êͺ¡Òä͹¿Ô¡ËÃ×ÍäÁè"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "¡ÓÅѧ¾ÔÁ¾ì¡ÃдÒÉ·´Êͺ"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "¤Ø³µéͧ¡Ò÷´Êͺ¡Òä͹¿Ô¡ËÃ×ÍäÁè"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ (µè͵Դ¡ÑºµÑÇà¤Ã×èͧ)"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "¤Ø³µéͧ¡ÒÃàÃÔèÁ·Ó§Ò¹ Network ãËÁèËÃ×ÍäÁè"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ÍèÒ¹ CUPS drivers database..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "¡Òä͹¿Ô¡ Proxies"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "¤èҢͧ Proxy ¤ÇèÐà»ç¹ http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Port number ¤ÇÃà»ç¹µÑÇàÅ¢"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "¤èҢͧ Proxy ¤ÇèÐà»ç¹ ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Autologin"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "ÃËÑʼèÒ¹"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "äÁèÁÕÃËÑʼèÒ¹"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "ÃËÑʼèÒ¹äÁèàËÁ×͹¡Ñ¹"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "äÁèÊÒÁÒöà¾ÔèÁ¾ÒÃìµÔªÑè¹à»ç¹ _formatted_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "äÁèÊÒÁÒöºÑ¹·Ö¡ä¿Åì %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid failed"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid failed (maybe raidtools are missing?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "äÁèÁÕ¾ÒÃìµÔªÑè¹¾ÍÊÓËÃѺ RAID ÃдѺ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ¤×Íâ»Ãá¡ÃÁÊÓËÃѺµÑé§àÇÅÒ·Ó§Ò¹"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ¤×Íâ»Ãá¡ÃÁ´ÙáÅʶҹТͧ battery \n"
-"ÁѹÊÒÁÒö¨Ð»Ô´à¤Ã×èͧàÁ×èÍàÇÅÒ battery ÁÕ俹éÍÂ"
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ¤×Íâ»Ãá¡ÃÁÁҵðҹ¢Í§ Unix ·ÕèÊÑ觷ӧҹâ»Ãá¡ÃÁã¹àÇÅÒ·Õè¡Ó˹´\n"
-"vixie cron à¾ÔèÁ¤ÇÒÁÊÒÁÒöãËé¡Ñº UNIX cron «Öè§ÃÇÁ¶Ö§à¾ÔèÁ\n"
-"Ãкº¤ÇÒÁ»ÅÍ´ÀÑÂáÅÐ option ¡ÒûÃѺáµè§Í×è¹æ"
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ·ÓãËéÊÒÁÒöãªé mouse ¡Ñºâ»Ãá¡ÃÁ·ÕèÃѹ㹠text mode\n"
-"ÁѹÂѧªèÇ·ÓãËéÊÒÁÒöãªé cut-and-paste áÅÐ popup-menu \n"
-"´éÇÂ"
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache ¤×Í World Wide Web server"
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (inetd) ¨ÐÊÑ觷ӧҹâ»Ãá¡ÃÁËÅÒÂæÍÂèÒ§\n"
-"àÁ×èÍÁÕ¤ÇÒÁµéͧ¡ÒÃà¡Ô´¢Öé¹  µÑÇÍÂèÒ§â»Ãá¡ÃÁ·ÕèÁѹÃѺ¼Ô´ªÍº¤×Í telnet\n"
-"ftp rsh áÅÐ rlogin  ¡ÒáàÅÔ¡ inetd ¨Ð·ÓãËéâ»Ãá¡ÃÁ·Ñé§ËÁ´·ÕèÁѹÃѺ\n"
-"¼Ô´ªÍºÍÂÙèäÁè·Ó§Ò¹"
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"ᾡࡨ¹Õé¨ÐàÃÕ¡ãªé keyboard map µÒÁ·ÕèÃкØÍÂÙèã¹ \n"
-"/etc/sysconfig/keyboard  «Öè§ÊÒÁöàÅ×Í¡ä´éâ´Âãªé kbdconfig\n"
-"¤Ø³¤ÇûÅèÍÂãËéÁѹ·Ó§Ò¹ã¹à¤Ã×èͧ·ÑèÇä»"
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ¤×Í print daemon ·Õè¨Óà»ç¹µéͧÁÕ¶éÒµéͧ¡ÒÃãËé lpr ·Ó§Ò¹¶Ù¡µéͧ\n"
-"·Õè¨ÃÔ§áÅéÇÁѹ¤×Í server ·Õè¨Ñ´¡ÒÃÊ觧ҹ¾ÔÁ¾ìä»à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) ¤×Í Domain Name Server (DNS) ·Ó˹éÒ·Õèá»Å§ª×èÍ\n"
-"host names à»ç¹ IP addresses."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activates/Deactivates network interfaces ·Ñé§ËÁ´ ·Õè¶Ù¡µÑé§ãËé\n"
-"àÃÔèÁ·Ó§Ò¹µÍ¹ boot"
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ¤×Í protocol ·Õèãªé¡Ñ¹ÍÂèÒ§áËÃèËÅÒÂÊÓËÃѺ¡ÒÃáªÃìä¿Å캹TCP/IP networks.\n"
-"ÁѹãËé¡Ò÷ӧҹ¢Í§NFS server ·ÕèÃкØã¹ä¿Åì /etc/exports"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ¤×Í protocol ·Õèãªé¡Ñ¹ÍÂèÒ§áËÃèËÅÒÂÊÓËÃѺ¡ÒÃáªÃìä¿Å캹TCP/IP networks.\n"
-"ÁѹãËé¡Ò÷ӧҹ¢Í§NFS server "
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ʹѺʹع¡Ò÷ӧҹ¢Í§ÍØ»¡Ã³ìËÅÒÂæÍÂèÒ§àªè¹\n"
-"ethernet ËÃ×Í modem 㹤ÍÁ¾ÔÇàµÍÃìẺ¾¡¾Ò"
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper ºÃÔËÒáÒõԴµèͧ͢ RPC «Öè§ãªé¡Ñº\n"
-"protocols àªè¹ NFS áÅÐ NIS Portmap server µéͧ·Ó§Ò¹º¹à¤Ã×èͧ\n"
-"·Õè·Ó˹éÒ·Õèà»ç¹ server ¢Í§ protocal «Öè§àÃÕ¡ãªé¡Ò÷ӧҹẺ RPC"
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix à»ç¹â»Ãá¡ÃÁ·Ó˹éÒ·ÕèÊ觨´ËÁÒ¨ҡà¤Ã×èͧ˹Öè§\n"
-"ä»ÍÕ¡à¤Ã×èͧ˹Öè§"
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Ãѹ X-Window àÁ×èÍàÃÔèÁ·Ó§Ò¹"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "àÃÔèÁáÅÐËÂØ´ X Font Server µÍ¹ boot áÅÐ àÅÔ¡"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "àÅ×Í¡¡ÒúÃÔ¡Ò÷Õèµéͧ¡ÒÃãËéàÃÔèÁµÑé§áµè¡ÒÃàÃÔèÁ·Ó§Ò¹¢Í§à¤Ã×èͧ"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "��ணயம�"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "System mode"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ÍêÍ»ªÑ蹢ͧà¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "ª×èÍà«ÔÃì¿àÇÍÃì¢Í§¾ÃÔ¹àµÍÃì"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ÍØ»¡Ã³ì"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "¡ÓÅѧ·Ó§Ò¹"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ËÂØ´"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"äÁèÁÕ¢éÍÁÙÅà¾ÔèÁàµÔÁ\n"
-"ÊÓËÃѺ¡ÒúÃÔ¡ÒùÕé ¢Íâ·É¤ÃѺ"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "¢³Ð boot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "ʶҹÐ:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "à«ç¡àµÍÃì"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Rest of the world"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "¡ÒõԴµèÍ internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "¾Ñ²¹Ò«Í¿·ìáÇÃì (Development)"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Control Center"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Network interface"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "ª×èÍâÎʵì¢Í§ SMB server"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ẻ¼ÙéàªÕèÂǪҭ (Expert)"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "¡ÓÅѧµÔ´µÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"â»Ãá¡ÃÁäÁèÊÒÁÒöÍèÒ¹µÒÃÒ§¾ÒÃìµÔªÑè¹ä´é ¢éÍÁÙÅã¹µÒÃÒ§äÁè¶Ù¡µéͧ :(\n"
-"â»Ãá¡ÃÁ¨Ð¾ÂÒÂÒÁà¤ÅÕÂÃì¾ÒÃìµÔªÑè¹·ÕèÁջѭËÒãËé"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "¼Ô´¾ÅÒ´"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "¡Òä͹¿Ô¡ËÅѧ¡ÒõԴµÑé§"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Boot Style Configuration"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "¢ÍáÊ´§¤ÇÒÁÂÔ¹´Õ"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "µÔ´µÑé§"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "à¾ÔèÁ¼Ùéãªé"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "¿ÍÃìáÁµ loopback file %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "àÅ×Í¡¡ÅØèÁá¾ç¤à¡ç¨"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§ "
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "ź¤ÔÇ"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "ź Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "ª×èͼÙéãªé"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "¡Ãسҷ´ÊͺàÁéÒÊì"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "â»Ã´ÅͧÍÕ¡¤ÃÑé§"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "â»Ã´ÅͧÍÕ¡¤ÃÑé§"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "äÁèÁÕÃËÑʼèÒ¹"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN connection"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "¤Ø³µéͧ¡ÒÃàÅ×Í¡¤ÕÂìºÍÃì´àÅÂìàÍéÒ·ìẺ㴠"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "â»Ã´àÅ×Í¡¾ÒÃìµÔªÑè¹"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§ "
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "¡Ãسҷ´ÊͺàÁéÒÊì"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Network interface"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "ª×èͼÙéãªé"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§ "
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "¡ÃسÒàÅ×Í¡ÀÒÉÒ·Õèµéͧ¡ÒÃãªé"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "¡ÒõÃǨËÒÎÒÃì´ä´ÃÇì"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "ª×èͼÙéãªé"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Wheel"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Wheel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "ÍêÍ»ªÑ蹢ͧâÁ´ÙÅ:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§ "
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§ "
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "à«çµÍѾÃкºä¿Åì"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "/Options/·´Åͧ"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "¤Ø³µéͧ¡ÒÃãËéâÁà´çÁ¢Í§¤Ø³µè͡Ѻ¾ÍÃìµÍ¹Ø¡ÃÁã´?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "¤Ø³ÁÕàÁéÒÊ쪹Դã´"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "àÃÕ¡¤×¹¨Ò¡á¼è¹¿ÅéÍ»»Õé"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "¤Ø³ÁÕàÁéÒÊ쪹Դã´"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Í×è¹æ"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "µÔ´µÑé§Ãкº"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "àÃÕ¡¤×¹¨Ò¡ä¿Åì"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "àÃÕ¡¤×¹¨Ò¡ä¿Åì"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Ẻ»ÃѺá¡éä´é (Customized) "
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_ªèÇÂàËÅ×Í"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- ¡è͹"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "ʶҹÐ:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "àÃÕ¡¤×¹¨Ò¡ä¿Åì"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Next ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "¡ÃسÒàÅ×Í¡ÀÒÉÒ·Õèµéͧ¡ÒÃãªé"
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "¡ÃسÒàÅ×Í¡ÀÒÉÒ·Õèµéͧ¡ÒÃãªé"
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "¡ÃسÒàÅ×Í¡ÀÒÉÒ·Õèµéͧ¡ÒÃãªé"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "ºÑ¹·Ö¡Å§ä¿Åì"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "¡Ãسҷ´ÊͺàÁéÒÊì"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§ "
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "à«çµÍѾÃкºä¿Åì"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "¡ÒõԴµÑé§ %s ÅéÁàËÅÇ µèÍ仹Õéà»ç¹¢éͼԴ¾ÅÒ´·Õèà¡Ô´¢Öé¹"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "äÁ辺¡ÒÃì´à¹çµàÇÔÃì¡"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "·ÓàÃÕºÃéÍÂáÅéÇ"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "¿ÍÃìáÁµ Floppy"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "¡ÓÅѧàµÃÕÂÁ¡ÒõԴµÑé§"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "¨Óà¾ÒÐ"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "¨Óà¾ÒÐ"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "¿ÍÃìáÁµ¾ÒÃìµÔªÑè¹"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "¡Ó˹´¨Ø´àÁéÒ·ì"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "àÅ×Í¡¾ÒÃìµÔªÑè¹·Õè¤Ø³µéͧ¡ÒÿÍÃìáÁµ"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "´Õ"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "àÅÔ¡"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ì"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "µÔ´µÑé§Ãкº"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "àÅ×Í¡ä¿Åì"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "¢éͤÇÒÁ init"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "äÁèÁÕÍØ»¡Ã³ì Network º¹à¤Ã×èͧ¤Ø³"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "µÔ´µÑé§"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "äÁèÁÕÍØ»¡Ã³ì Network º¹à¤Ã×èͧ¤Ø³"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "ÍÍ¡¨Ò¡¡ÒõԴµÑé§"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "¡ÒÃàª×èÍÁµèÍ internet Ẻ share ä´é·Ó§Ò¹áÅéÇ"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "disable"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "àÅÔ¡"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "¤Í¹¿Ô¡ãËÁè"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "¡àÅÔ¡¡Ò÷ӧҹ¢Í§ server"
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing ¶Ù¡Â¡àÅÔ¡áÅéÇ"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "¡ÒõԴµèÍ internet Ẻ share ¶Ù¡Â¡àÅÔ¡áÅéÇ"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "enable"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "àÃÔèÁ·Ó§Ò¹ server"
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing àÃÔèÁ·Ó§Ò¹áÅéÇ"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"¢³Ð¹Õé¡ÒõèÍà¢éÒ internet ä´é·Ó¡ÒûÃѺáµè§àÃÕºÃéÍÂáÅéÇ\n"
-"¤Ø³ÊÒÁÒö·ÓãËé¼ÙéãªéÍ×è¹æäªé internet ÃèÇÁ¡Ñº¤Ø³ä´é\n"
-"(áµè¤Ø³¨Óà»ç¹µéͧÁÕ Network Adapter à¾×èÍ¡ÒõèÍÃкº LAN )\n"
-"\n"
-"¤Ø³µéͧ¡ÒÃãËé¼ÙéÍ×è¹ãªé internet ÃèÇÁ´éÇÂËÃ×ÍäÁè\n"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (using module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "äÁèÁÕÍØ»¡Ã³ì Network º¹à¤Ã×èͧ¤Ø³"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr "äÁèÊÒÁÒöµÃǨ¾º network adapter º¹à¤Ã×èͧ¹Õé ¡ÃسÒÃѹâ»Ãá¡ÃÁ»ÃѺáµè§ hardware"
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Network interface"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ã¹à¤Ã×èͧ¢Í§¤Ø³ÁÕ network adapter Íѹà´ÕÂÇ·Õèä´éÃѺ¡ÒûÃѺáµè§áÅéÇ\n"
-"\n"
-"%s\n"
-"\n"
-"¼Á¡ÓÅѧ¨Ðãªé adapter ¹Õé¡ÑºÃкº LAN"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "¡ÃسÒàÅ×Í¡ network adapter ·Õè¨Ðãªé¡ÑºÃкº LAN"
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "äÁèÁÕ¡Òä͹¿Ô¡¨ÍÀÒ¾"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Boot Style Configuration"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "¡Òä͹¿Ô¡ Internet"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "¤èÒ IP ¢Í§ CUPS à«ÔÃì¿àÇÍÃì"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "ÁÕ¤ÇÒÁ¢Ñ´áÂ駢ͧ LAN address «Öè§à¨Í㹤͹¿Ô¡»Ñ¨¨ØºÑ¹ã¹ %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "µÃǨ¾º¤Í¹¿Ô¡¢Í§ Firewall"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "¡ÓÅѧ·Ó¡Òä͹¿Ô¡"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "¡ÓÅѧ»ÃѺáµè§ scripts µÔ´µÑé§â»Ãá¡ÃÁ áÅÐàÃÔèÁ·Ó§Ò¹ servers..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "»Ñ­ËÒ¡ÒõԴµÑé§á¾ç¤à¡ç¨ %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"·Ø¡ÍÂèÒ§ä´é¶Ù¡·Ó¡ÒûÃѺáµè§àÃÕºÃéÍÂáÅéÇ\n"
-"¤Ø³ÊÒÁÒöãªéÍÔ¹àµÍÃì๵º¹¤ÍÁ¾ÔÇàµÍÃìÍ×è¹æã¹ LAN â´Âãªé (DHCP)"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "¡ÒûÃѺáµè§àÃÕºÃéÍÂáÅéÇáÅе͹¹Õé¡çä´é·Ó§Ò¹áÅéÇ"
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "äÁèÁÕ¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "¡ÒÃàª×èÍÁµèÍ Internet áÅСÒûÃѺáµè§"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÂÔ¹´Õµé͹ÃѺÊÙèà¤Ã×èͧÁ×Í㹡ÒõԴµèÍ internet Ẻ share\n"
-"\n"
-"%s\n"
-"\n"
-"¡´ ``Ok'' ¶éҤسµéͧ¡ÒÃàÃÔèÁ¡Ò÷ӧҹ¢Í§ setup wizard"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡ (%d adapters)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profile: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "ź profile..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "profile ·Õèµéͧ¡ÒÃź:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "profile ãËÁè..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "ª×èÍâÎʵì:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "¡ÒõԴµèÍ internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "»ÃÐàÀ·: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "ࡵàÇÂì:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "ʶҹÐ:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "»ÃѺáµè§¡ÒõԴµèÍà¢éÒ internet"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "ʶҹÐ:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "»ÃѺáµè§Ãкºà¹çµàÇÔÃì¡ÀÒÂã¹..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Wizard..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Áռŷѹ·Õ"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "¡ÃسÒÃÍÊÑ¡¤ÃÙè ..."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "àª×èÍÁµèÍÍÂÙè"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "äÁèàª×èÍÁµèÍ"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "µÔ´µèÍ"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "¡àÅÔ¡µÔ´µèÍ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot Protocol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "àÃÔèÁ·Ó§Ò¹µÍ¹ boot"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP client"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "áÍ礷տ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "áÍ礷տ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "¡ÒûÃѺáµè§¡ÒõԴµèÍà¢éÒ internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "¡ÒûÃѺáµè§¡ÒõԴµèÍà¢éÒ internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "ࡵàÇÂì"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "àÅ×Í¡ÃдѺÃкºÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Control Center"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "àÅ×Í¡à¤Ã×èͧÁ×Í·Õè¤Ø³µéͧ¡ÒÃãªé"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "¤Ò¹Ò´Ò (¤ÇÔ຤)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "ÂØâû"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "äÍ«ìᏴì"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "ÂØâû"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "¾ÍÃìµÍ¹Ø¡ÃÁ"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "ÇÔ¸Õ¡ÒÃãªé: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "¤Ø³µéͧ¡ÒÃàÅ×Í¡¤ÕÂìºÍÃì´àÅÂìàÍéÒ·ìẺ㴠"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "à»ÅÕè¹ CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "äÁèÊÒÁÒöàÃÔèÁ live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/ä¿Åì/_ãËÁè"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/ä¿Åì/_à»Ô´"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/ä¿Åì/_ºÑ¹·Ö¡"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/ä¿Åì/_ºÑ¹·Ö¡à»ç¹"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/ä¿Åì/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Options"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Options/·´Êͺ"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Help"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/ªèÇÂàËÅ×Í/_About..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "mise-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "mise-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "ª×èͼÙéãªé"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "¢éͤÇÒÁ"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "¤é¹ËÒ"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "ÍØ»¡Ã³ìµÃǨÊͺ logs"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "¤èÒµÔ´µÑé§"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "matching"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "but not matching"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "àÅ×Í¡ file"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "»®Ô·Ô¹"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "¢éͤÇÒÁ¢Í§ file"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "â»Ã´¡ÃسÒÃÍ,parsing file:%s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ÍØ»¡Ã³ì"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "¿ÍÃìáÁµ"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "¡Òä͹¿Ô¡"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "ºÑ¹·Ö¡á¿éÁà»ç¹"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "¤Ø³ÁÕàÁéÒÊ쪹Դã´"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "äÁ辺 serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "µéͧ¡ÒèÓÅͧàÁéÒÊì»ØèÁ·ÕèÊÒÁ´éÇÂËÃ×ÍäÁè?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "àÅ×Í¡¡ÃÒ¿¿Ô¤¡ÒÃì´"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "ÍØ»¡Ã³ìºÙµ"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "¡ÒûÃѺáµè§ firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "¡ÒûÃѺáµè§ firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "àÅ×Í¡ÀÒÉÒ·Õè¤Ø³ãªé"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "àÅ×Í¡ªØ´¡ÒõԴµÑé§"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "¡ÒõÃǨËÒÎÒÃì´ä´ÃÇì"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "¤Í¹¿Ô¡àÁéÒÊì"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "àÅ×Í¡¤ÕÂìºÍÃì´"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Ãкº¤ÇÒÁ»éͧ¡Ñ¹"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "à«çµÍѾÃкºä¿Åì"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "¿ÍÃìáÁµ¾ÒÃìµÔªÑè¹"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "àÅ×Í¡á¾ç¤à¡ç¨"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "µÔ´µÑé§Ãкº"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "à¾ÔèÁ¼Ùéãªé"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "»ÃѺáµè§¡ÒúÃÔ¡ÒõèÒ§æ"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "µÔ´µÑ駺ٵâËÅ´à´ÍÃì"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "ÊÃéÒ§á¼è¹ºÙµ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "¤Í¹¿Ô¡Ãкº X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "µÔ´µÑé§Ãкº"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "ÍÍ¡¨Ò¡¡ÒõԴµÑé§"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"¡ÒûÃѺáµè§àÃÕºÃéÍ ãËéºÑ¹·Ö¡¢éÍÁÙÅä´éãËÁ¤ÃѺ\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adapter %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "à¡Ô´¢éͼԴ¾ÅҴ㹡ÒÃà»Ô´ %s ÊÓËÃѺ¡ÒÃà¢Õ¹: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "¡ÒûÃѺáµè§ firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "¡ÓÅѧàµÃÕÂÁ¡ÒõԴµÑé§"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìã¹Ãкº Network (Socket)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "´Õ"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "à¤Ã×èͧÁ×ÍÊÓËÃѺ Palm Pilot ËÃ×Í Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "à¤Ã×ͧÁ×Í·ÕèªèÇÂ㹡ÒûÃѺáµè§à¤Ã×èͧªÍ§¤Ø³ãËé§èÒ¢Öé¹"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "µÓá˹è§"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "¡ÒûÃѺáµè§ LAN"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Graphical Desktops Í×è¹æ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "¡Ò÷ӧҹẺ¡ÃÒ¿¿Ô¡"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "à¤Ã×èͧÁ×Í㹡ÒÃ·Ó CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "à«ÔÃì¿àÇÍÃì"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "à¤Ã×èͧ¾ÔÁ¾ìã¹Ãкº Network (Socket)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "à¤Ã×èͧÁ×Í㹡ÒÃÍèÒ¹áÅÐÊè§ mail áÅÐ news (pine, mutt, tin..) áÅзèͧÍÔ¹àµÍÃìà¹çµ"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "¡ÒÃà§Ô¹ÊèǹµÑÇ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients for different protocols including ssh"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "¡ÒõԴµèÍ internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Graphical Desktops Í×è¹æ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "â»Ãá¡ÃÁ·ÕèªèǨѴ¡ÒÃàÃ×èͧ¡ÒÃà§Ô¹ àªè¹ gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - à¢Õ¹ CD "
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Workstation ·Ò§ÇÔ·ÂÒÈÒʵÃì"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "àÅÔ¡"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "·ÓàÃÕºÃéÍÂáÅéÇ"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "àÅ×Í¡¼Ùéãªé default"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "à¤Ã×èͧ¾ÔÁ¾ìẺÃÕâÁ·"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "¤Ø³ÊÒÁÒö»é͹¢éÍÁÙÅÍêÍ»ªÑè¹ãËé¡ÑºâÁ´ÙÅ %s ä´éáÅéÇ"
-
-#~ msgid "mount failed"
-#~ msgstr "¡ÒÃàÁéÒ·ìÅéÁàËÅÇ"
-
-#~ msgid "Low"
-#~ msgstr "µèÓ"
-
-#~ msgid "Medium"
-#~ msgstr "»Ò¹¡ÅÒ§"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ẻ¼ÙéàªÕèÂǪҭ (Expert)"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "ÅÕչء«ì¨Ð¨Ñ´¡ÒÃÃкºàÇÅÒà»ç¹ GMT ËÃ×Í \"Greenwich Mean Time\" áÅÐá»Å§¤èÒ\n"
-#~ "àÇÅÒãËéà»ç¹àÇÅÒ·éͧ¶Ôè¹ «Ö觨ТÖé¹ÍÂÙè¡ÑºÂèÒ¹àÇÅÒ·Õè¤Ø³ä´éàÅ×Í¡àÍÒäÇé"
-
-#~ msgid "Connect to Internet"
-#~ msgstr "àª×èÍÁµèÍ Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "¨º¡ÒÃàª×èÍÁµèÍ Internet "
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "¤Í¹¿Ô¡Ãкºà¹çµàÇÔÃì¡ (Lan ËÃ×Í Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "¤Ø³µéͧ¡ÒèÐÂéÒÂä»´ÔÊ¡ìä˹"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "àÅ×Í¡á¾ç¤à¡ç¨·Õè¤Ø³µéͧ¡ÒõԴµÑé§ "
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "¢éÍÁÙÅ"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Workstation ·Õè·Ó§Ò¹"
-
-#~ msgid "authentification"
-#~ msgstr "authentification"
-
-#~ msgid "user"
-#~ msgstr "¼Ùéãªé"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "¤Ø³ÁÕàÁéÒÊ쪹Դã´"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "àÅÔ¡"
-
-#~ msgid "Active"
-#~ msgstr "áÍ礷տ"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "äÁèµéͧ"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "µÃǨ¾ºà¤Ã×èͧ¾ÔÁ¾ìâÁà´Å \"%s\""
-
-#~ msgid "Local Printer Device"
-#~ msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ìâŤÍÅ"
-
-#~ msgid "Printer Device"
-#~ msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Remote CUPS server"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Remote CUPS server"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Åչء«ì"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "System mode"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Í×è¹æ"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "¤Ø³µéͧ¡ÒÃàÅ×Í¡¤ÕÂìºÍÃì´àÅÂìàÍéÒ·ìẺ㴠"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "â»Ã´àÅ×Í¡¾ÒÃìµÔªÑè¹"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "»ÃÐàÀ·: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "ä¿Åìáºç¤ÍѾÁջѭËÒ"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "¤Í¹¿Ô¡Ãкº X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "ÍØ»¡Ã³ìà¤Ã×èͧ¾ÔÁ¾ì"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "¡àÅÔ¡"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "µ¡Å§"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Mouse"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "·´Êͺ connection..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "¨º¡ÒõԴµèÍ..."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "à¤Ã×èͧ¤Ø³ä´éàÅÔ¡¡ÒõԴµèÍáÅéÇ"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "àÅ×Í¡¢¹Ò´·Õè¤Ø³µéͧ¡ÒõԴµÑé§"
-
-#~ msgid "Total size: "
-#~ msgstr "¢¹Ò´ÃÇÁ: "
-
-#~ msgid "Please wait, "
-#~ msgstr "â»Ã´ÃÍÊÑ¡¤ÃÙè"
-
-#~ msgid "Total time "
-#~ msgstr "àÇÅÒ·Ñé§ËÁ´ "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "ãªé¤Í¹¿Ô¡·ÕèÁÕÍÂÙèáÅéǢͧÃкº X11 ËÃ×ÍäÁè?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "ÍØ»¡Ã³ì·Õèà¤Ã×èͧ¾ÔÁ¾ì¢Í§¤Ø³àª×èÍÁµèÍÍÂÙè¤×Í \n"
-#~ "( /dev/lp0 ¨Ðà·Õºà·èҡѺ LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "ÃÐÇѧ network adapter ä´éà¤ÂÁÕ¡ÒûÃѺáµè§àÃÕºÃéÍÂáÅéÇ áµè¼Á¨Ð·Ó¡ÒûÃѺáµè§ãËÁè"
-
-#~ msgid "New"
-#~ msgstr "ãËÁè"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "ª×èͤÔÇÃÕâÁ·"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "â»Ã´àÅ×Í¡¾ÒÃìµÔªÑè¹"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "à¡Ô´¢é͢ѴáÂé§ (%s), â»Ã´àÅ×Í¡ãËé¶Ù¡µéͧ\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (¤èÒµÑé§µé¹ %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "µÑÇàÅ×Í¡¢Í§¤Ø³? (¤èÒµÑé§µé¹ %s ãËéãÊè `none' à¾×è͵ÑÇàÅ×Í¡ÇèÒ§) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "äÁèÊÒÁÒöà»Ô´ /etc/sysconfig/autologin ÁÒÍèÒ¹ä´é: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "¤Ø³µéͧ¡ÒÃàÃÔèÁ·Ó§Ò¹ Network ãËÁèËÃ×ÍäÁè"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "¤Ø³ÂÍÁÃѺËÃ×ÍäÁè"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "¼Á¡ÓÅѧ¨ÐàÅÔèÁ·Ó§Ò¹ Network Device ãËÁè:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "¼Á¡ÓÅѧ¨ÐàÃÔèÁ·Ó§Ò¹ Network Device %s ãËÁè µ¡Å§ãËÁ?"
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "àÅ×Í¡¼Ùéãªé default"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "¡Ãسҷ´ÊͺàÁéÒÊì"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "¡ÃسÒàÅ×Í¡ÀÒÉÒ·Õèµéͧ¡ÒÃ㹡ÒõԴµÑé§áÅÐãªé§Ò¹¢Í§Ãкº"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "àÅ×Í¡ÃٻẺ¢Í§¤ÕÂìºÍÃì´µÒÁÃÒ¡ÒâéÒ§µé¹"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "àÅ×Í¡:\n"
-#~ "\n"
-#~ " - Ẻ»ÃѺá¡éä´é: ¢éÍàÅ×Í¡·Õèá¡éä¢ä´éX ¶éҤس¤Øé¹à¤Â¡ÑºÅչء«ì´ÕÍÂÙèáÅéÇ\n"
-#~ "   ¤Ø³ÍÒ¨µéͧ¡ÒÃàÅ×Í¡¡ÒõԴµÑé§ÃкºÃÐËÇèÒ§Ãкº·ÑèÇä», ÃкºÊÓËÃѺ¾Ñ²¹Ò«Í¿·ìáÇÃì\n"
-#~ "   ËÃ×ÍẺà«ÔÃì¿àÇÍÃì ãËéàÅ×Í¡ \"»¡µÔ\" ÊÓËÃѺµÔ´µÑ駵ÒÁ»¡µÔŧ㹤ÍÁ¾ÔÇàµÍÃì\n"
-#~ "   ¤Ø³ÍÒ¨àÅ×Í¡ \"¾Ñ²¹Ò«Í¿·ìáÇÃì\" ¶éҤسµéͧ¡ÒÃãËé¤ÍÁ¾ÔÇàµÍÃì¢Í§¤Ø³ÊÓËÃѺ¡Ò÷ӧҹ\n"
-#~ "   Ẻ¡ÒþѲ¹Ò«Í¿·ìáÇÃì ËÃ×ÍàÅ×Í¡ \"à«ÔÿìàÇÍÃì\" ¶éҤسµéͧ¡ÒÃ\n"
-#~ "   µÔ´µÑ駫Ϳ·ìáÇÃìÊÓËÃѺà«ÔÃì¿àÇÍÃì·ÑèÇæä» (àªè¹àÁÅÅì ¡ÒþÔÁ¾ì...)\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ẻ¼ÙéàªÕèÂǪÒ: (ÊÓËÃѺ¼ÙéªÓ¹Ò­áÅéÇ) ¶éҤسãªé§Ò¹ GNU/Linux ä´éÍÂèÒ§¤Åèͧá¤ÅèÇ\n"
-#~ "   áÅеéͧ¡ÒõԴµÑé§áººàÅ×Í¡´éǵ¹àͧ ¡ÒõԴµÑé§áºº¹Õé¨ÐàËÁÒÐÊÁ·ÕèÊØ´\n"
-#~ "   ¤Ø³ÂѧÊÒÁÒö¨ÐàÅ×Í¡ãªé§Ò¹Ãкº·Õè¤Ø³µÔ´µÑé§áºº \"Ẻ»ÃѺá¡éä´é\"ä´é´éÇÂ"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "¤Ø³µéͧàÅ×Í¡¡ÒÃãªé§Ò¹¢Í§à¤Ã×èͧ¤Ø³ ·Ò§àÅ×Í¡¤×Í:\n"
-#~ "\n"
-#~ "* Workstation\n"
-#~ "* Development\n"
-#~ "* Server"
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "µÍ¹¹Õé¤Ø³ÊÒÁÒö»é͹ÃËÑʼèÒ¹¢Í§ÃÙ· (¼Ùé´ÙáÅÃкº) «Ö觤س¨Ðµéͧ\n"
-#~ "»é͹ÃËÑʼèÒ¹Êͧ¤ÃÑé§à¾×èÍÂ×¹ÂѹÇèҤسä´é»é͹ÃËÑʼèÒ¹µÃ§¡Ñ¹\n"
-#~ "\n"
-#~ "\n"
-#~ "ÃÙ· à»ç¹¼Ùé´ÙáÅÃкº «Öè§à»ç¹¼Ùéãªé§Ò¹à¾Õ§¤¹à´ÕÂÇ·Õèä´éÃѺ͹حҵãËé\n"
-#~ "·Ó¡ÒáÒÃá¡é䢤͹¿Ô¡¢Í§Ãкºä´é ´Ñ§¹Ñ鹤س¨Óà»ç¹¨ÐµéͧàÅ×Í¡\n"
-#~ "ÃËÑʼèÒ¹ÍÂèÒ§ÃÐÁÑ´ÃÐÇѧ ¡ÒÃãªé§Ò¹ª×èͺѭªÕ¢Í§ÃÙ·â´ÂäÁèä´éÃѺ͹حҵ\n"
-#~ "ÍÒ¨¡èÍãËéà¡Ô´¤ÇÒÁàÊÕÂËÒÂÍÂèÒ§ÃéÒÂáç¡Ñº¤ÇÒÁ¶Ù¡µéͧ¢Í§¢éÍÁÙŢͧÃкº\n"
-#~ "ÃÇÁ·Ñé§à¤Ã×èͧ¤ÍÁ¾ÔÇàµÍÃìÍ×è¹·ÕèµèÍÍÂÙè´éÇÂä´é ¡ÒáÓ˹´ÃËÑʼèÒ¹¨Ðµéͧ·Ó¡ÒÃ\n"
-#~ "¼ÊÁ¼ÊÒ¹¡Ñ¹ÃÐËÇèÒ§µÑÇÍÑ¡ÉÃáÅеÑÇàÅ¢ áÅÐãËéÁÕ¤ÇÒÁÂÒÇÍÂèÒ§¹éÍ 8 µÑÇÍÑ¡ÉÃ\n"
-#~ "¤Ø³ *äÁè¤ÇÃ* ¨´ÃËÑʼèÒ¹¢Í§¤Ø³äÇé ÍÂèÒ¡Ó˹´ãËéÃËÑʼèÒ¹ÂÒÇËÃ×ͫѺ«é͹à¡Ô¹ä»\n"
-#~ "áÅÐÍÂèÒ¡Ó˹´ãËéÃËÑʼèÒ¹ÂÒ¡áÅЫѺ«é͹à¡Ô¹¡ÇèҤس¨Ð¨Óä´é´éÇÂ"
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "µÍ¹¹Õé¤Ø³ÊÒÁÒöÊÃéÒ§ª×èͺѭªÕ¼ÙéãªéẺ \"regular\" (·ÑèÇä») ä´éáÅéÇ\n"
-#~ "«Ö觺ѭªÕẺ·ÑèÇ仹Õé¤Ø³ÊÒÁÒöÊÃéÒ§ä´éÁÒ¡¡ÇèÒ˹Ö觪×èÍ (ÃÙ·¨ÐÁÕä´éª×èÍà´ÕÂÇ)\n"
-#~ "áÅЪ×èͺѭªÕáµèÅЪ×èͨСÓ˹´äÇé੾ÒмÙéãªéáµèÅФ¹·Õèãªé§Ò¹¤ÍÁ¾ÔÇàµÍÃì «Öè§\n"
-#~ "áµèÅФ¹¡ç¨ÐÁÕ¢éÍ¡Ó˹´¢Í§µ¹àͧ (ÊÀÒ¾áÇ´ÅéÍÁẺ¡ÃÒ¿¿Ô¡, ¡ÒÃà«çµâ»Ãá¡ÃÁà»ç¹µé¹)\n"
-#~ "áÅÐÁÕ \"home directory\" (ä´àÃç¡·ÍÃÕºéÒ¹) à»ç¹¢Í§µ¹àͧ´éÇ«Öè§ä´àÃç¡·ÍÃÕºéÒ¹\n"
-#~ "¨Ðà»ç¹·Õèà¡çº¢éÍ¡Ó˹´àËÅèÒ¹Õé\n"
-#~ "\n"
-#~ "\n"
-#~ "¢éÍááÊØ´ ¤Ø³¨ÐµéͧÊÃéÒ§ª×èͺѭªÕÊÓËÃѺµ¹àͧ ¶Ö§áÁéÇèҤس¨Ðà»ç¹à¾Õ§¼Ùéãªé¤¹\n"
-#~ "à´ÕÂÇã¹Ãкº¡çµÒÁ à¹×èͧ¨Ò¡¤Ø³äÁèÊÒÁÒöà¢éÒµÔ´µèÍÃкº¨Ò¡à¤Ã×Í¢èÒ¼èÒ¹·Ò§\n"
-#~ "ª×èͼÙéãªé root ä´é (à¹×èͧ¨Ò¡ÃкºÃÑ¡ÉÒ¤ÇÒÁ»ÅÍ´ÀÑÂ) «Öè§ËÒ¡äÁèÊÒÁÒöà¢éÒãªé\n"
-#~ "§Ò¹Ãкºä´é¡ç¨ÐäÁèÊÒÁÒöãªé§Ò¹ã´æä´é\n"
-#~ "\n"
-#~ "\n"
-#~ "´Ñ§¹Ñ鹤س¤ÇèеéͧµÔ´µèÍà¢éÒãªéÃкº¼èÒ¹·Ò§à¤Ã×Í¢èÒÂâ´Â·ÐàºÕ¹¢Í§¼Ùéãªé»¡µÔ\n"
-#~ "«Ö觤سä´éÊÃéÒ§äÇéã¹¢Ñ鹵͹¹Õé áÅÐà¢éÒÅçÍ¡ÍÔ¹ãªé§Ò¹ã¹°Ò¹ÐÃٷ੾ÒÐàÁ×èÍÁըش\n"
-#~ "»ÃÐʧ¤ì㹡ÒúÃÔËÒÃÃкº áÅзӡÒëèÍÁºÓÃاà·èÒ¹Ñé¹"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "µÍ¹¹Õéä´éàÇÅÒ·Õè¨Ð¤Í¹¿Ô¡Ãкº X ÇÔ¹â´ÇÊìáÅéÇ «Öè§Ãкº X ¨Ðà»ç¹á¡¹¡ÅÒ§¢Í§\n"
-#~ "Ãкº GUI (Graphical User Interface) ¢Í§Åչء«ì 㹡Òä͹¿Ô¡¤Ø³¨Ðµéͧ\n"
-#~ "·Ó¡Òä͹¿Ô¡ÇÔ´ÕâÍ¡ÒÃì´áÅШÍÀÒ¾ «Ö觢Ñ鹵͹ÊèǹãË­è¨Ðà»ç¹áººÍѵâ¹ÁѵԷÑé§ËÁ´\n"
-#~ "´Ñ§¹Ñ鹤س¡çà¾Õ§á¤èµÃǨÊͺ¤ÇÒÁ¶Ù¡µéͧ áÅÐÃѺ·ÃÒº¡ÒÃà«çµÃкºà·èÒ¹Ñé¹àͧ :)\n"
-#~ "\n"
-#~ "\n"
-#~ "ËÅѧ¨Ò¡ÊÔé¹ÊØ´¡Òä͹¿Ô¡ X ¡ç¨ÐàÃÔèÁµé¹·Ó§Ò¹ (¡àÇ鹤سäÁèÊÑè§ãËé DrakX ·Ó)\n"
-#~ "à¾×èÍãËé¤Ø³ÊÒÁÒöµÃǨáÅзÃÒºä´éÇèÒ¡ÒÃà«çµ¹Ñé¹ÊÒÁÒöãªé§Ò¹ä´é ËÒ¡äÁèÊÒÁÒö\n"
-#~ "·Ó§Ò¹ä´é ¤Ø³ÊÒÁÒö¡ÅѺä»á¡é䢡ÒÃà«çµÍѾä´éµÅÍ´àÇÅÒ"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Czech (Programmers)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakian (Programmers)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "ª×èͧ͢ profile ·Õè¨ÐÊÃéÒ§:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "à¢Õ¹ŧ㹠/etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "¿ÍÃìáÁµ·Ñé§ËÁ´"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ËÅѧ¨Ò¡¿ÍÃìáÁµ·Ø¡¾ÒÃìµÔªÑè¹"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "¢éÍÁÙÅ·Ñé§ËÁ´ã¹¾ÒÃìµÔªÑ蹨ж١ź·Ôé§"
-
-#~ msgid "Reload"
-#~ msgstr "àÃÕ¡¤×¹ÍÕ¡¤ÃÑé§"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "¤Ø³µéͧ¡ÒèзÓá¼è¹ floppy à¾×èÍ¡ÒõԴµÑé§áººÍÍâµéËÃ×ÍäÁè?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "¡Òä͹¿Ô¡ ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "àÇÅÒãªé CUPS SERVER ¤Ø³äÁè¨Óà»ç¹µéͧ»ÃѺáµè§à¤Ã×èͧ¾ÔÁ¾ì\n"
-#~ "㹵͹¹Õé  à¤Ã×èͧ¾ÔÁ¾ì¨Ð¶Ù¡¤é¹ËÒàͧ\n"
-#~ "¡àÇ鹤سÁÕ server º¹ network Í×è¹ ¡Ã³Õ¹Ñ鹤سµéͧ\n"
-#~ "ÃÐºØ IP ADDRESS áÅÐ port number ãËé¡Ñº CUPS server"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "ª×èͤÔÇÃÕâÁ·"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "ª×èÍâ´àÁ¹"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "äÁèÁÕà¤Ã×èͧ¾ÔÁ¾ì"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "¡Òä͹¿Ô¡Ãкºà¹çµàÇÔÃì¡"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "Profile: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "ª¹Ô´¡ÒÃàª×èÍÁµèÍ"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "àª×èÍÁµèÍ Internet"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "¨º¡ÒÃàª×èÍÁµèÍ Internet "
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "¨º¡ÒÃàª×èÍÁµèÍ Internet "
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "¨º¡ÒÃàª×èÍÁµèÍ Internet "
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "ª×èÍ¡ÒÃàª×èÍÁµèÍ"
-
-#~ msgid "NetWare"
-#~ msgstr "à¹çµáÇÃì"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Unrecognized config file"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "¡àÅÔ¡·Ó§Ò¹"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "àÃÔèÁ·Ó§Ò¹"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "¡ÒõԴµèÍẺ DSL ËÃ×Í ADSL"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "You can specify directly the URI to access the printer with CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "ãªè ãËé¾ÔÁ¾ì¡ÃдÒÉ·´ÊͺẺ ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "ãªè ãËé¾ÔÁ¾ì¡ÃдÒÉ·´ÊͺẺâ¾ÊµìʤÃÔ»µì"
-
-#~ msgid "Paper Size"
-#~ msgstr "¢¹Ò´¡ÃдÒÉ"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "ãËé¤×¹¡ÃдÒÉÍÍ¡ÁÒËÅѧ¨Ò¡àÊÃ稧ҹ´éÇÂËÃ×ÍäÁè?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ÍêÍ»ªÑ蹢ͧä´ÃàÇÍÃìẺ Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ÍêÍ»ªÑ蹢ͧ¤ÇÒÁÅÐàÍÕ´ÊÕ"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Print text as PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "ãËé·Ó¢éͤÇÒÁ stair-stepping Ẻ¤§·ÕèËÃ×ÍäÁè"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "¨Ó¹Ç¹Ë¹éÒµèͤÃÑé§"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "¢ÇÒ/«éÒ margins ˹èÇ points (1/72 of inch)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "º¹/ÅèÒ§ margins ˹èÇ points (1/72 of inch)"
-
-#~ msgid "Extra Text options"
-#~ msgstr "ÍêÍ»ªÑè¹µÑÇ˹ѧÊ×Í"
-
-#~ msgid "Reverse page order"
-#~ msgstr "ÊÅѺÅӴѺ˹éÒ"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "àÅ×Í¡¡ÒÃàª×èÍÁµè͡Ѻà¤Ã×èͧ¾ÔÁ¾ì"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "à¤Ã×èͧ¾ÔÁ¾ì·Ø¡à¤Ã×èͧµéͧ¡Òê×èÍ\n"
-#~ "à¤Ã×èͧ¾ÔÁ¾ì¹Õéãªéª×èÍÍÐäÃáÅÐ\n"
-#~ "à¤Ã×èͧ¾ÔÁ¾ì¹ÕéµÔ´µèÍâ´ÂÇÔ¸Õã´"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "¾ÃÔ¹µì¤ÔÇ (¾ÃÔ¹µì¤ÔÇà»ç¹·Õèæ§Ò¹¾ÔÁ¾ì¨Ðä»à¡çºäÇé·Õè¹Õè¡è͹Êè§à¤Ã×èͧ¾ÔÁ¾ì)\n"
-#~ "µéͧ¡ÒÃãËéÁÕ¡ÒõÑ駪×èÍ (»¡µÔ¨Ðà»ç¹ lp) áÅÐä´àÃç¡·ÍÃÕ·Õèà¡çº¢éÍÁÙÅ\n"
-#~ "¤Ø³µéͧ¡ÒõÑ駪×èÍ áÅСÓ˹´ä´àÃç¡·ÍÃÕãËéà»ç¹¤èÒã´ºéÒ§?"
-
-#~ msgid "Name of queue"
-#~ msgstr "ª×èͧ͢¤ÔÇ"
-
-#~ msgid "Spool directory"
-#~ msgstr "Ê»ÙÅä´àÃç¡·ÍÃÕ"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "¡ÒÃàÁéÒ·ìÅéÁàËÅÇ: "
-
-#~ msgid "yellow pages"
-#~ msgstr "ãªéÃкºÊÁش˹éÒàËÅ×ͧ (yellow pages)"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "¡ÒûÃѺáµè§ LAN"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "¤Ø³µéͧ¡ÒèеèÍà¢éÒ Internet â´ÂÇÔ¸Õã´"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "àÅ×Í¡ä¿Åì %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "àÃÔèÁ¡ÒõԴµèÍ.."
-
-#~ msgid "Configure..."
-#~ msgstr "¡ÓÅѧ·Ó¡ÒûÃѺáµè§.."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "script àÃÔèÁµé¹¹Õé¾ÂÒÂÒÁ·Õè¨ÐàÃÕ¡ãªé modules ÊÓËÃѺ usb mouse"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "¡Òä͹¿Ô¡ËÅѧÅѡɳСÒà boot"
-
-#~ msgid "Configuration complete.  May we write these changes to disk?"
-#~ msgstr "¡ÒûÃѺáµè§àÃÕºÃéÍ ãËéºÑ¹·Ö¡¢éÍÁÙÅä´éãËÁ¤ÃѺ"
-
-#, fuzzy
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "¡ÒÃàª×èÍÁµè͡Ѻ Internet Ẻ sharing"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "¤Í¹¿Ô¡ LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "ÊÃéÒ§á¼è¹ºÙµ"
-
-#~ msgid "Choice"
-#~ msgstr "·Ò§àÅ×Í¡"
diff --git a/perl-install/share/po/tr.po b/perl-install/share/po/tr.po
deleted file mode 100644
index bf8baa316..000000000
--- a/perl-install/share/po/tr.po
+++ /dev/null
@@ -1,12339 +0,0 @@
-# Turkish translation of DrakX
-# Copyright (C) 1999-2002 MandrakeSoft
-# Nilgün Belma Bugüner <nilgun@fide.org>, 2001, 2002
-# Hakan Terzioglu <hakan@gelecek.com.tr>, 1999
-# AHMET SEZEN <ahmet@gelecek.com.tr>, 1999
-# Görkem Çetin <gorkem@gelecek.com.tr>, 2000
-# Nazmi Savga <savga@catlover.com>, 2000
-# Ömer Fadıl USTA <omer_fad@hotmail.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX \n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-02 18:27+0200\n"
-"Last-Translator: Nilgün Belma Bugüner <nilgun@fide.org>\n"
-"Language-Team: Turkish <gnu-tr-u12a@lists.sourceforge.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Tüm kafalar tek tek yapılandırılıyor"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama geniÅŸletmesini kullan"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Sadece \"%s\" (%s) kartı yapılandırılsın"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Çoklu-Kafa yapılandırması"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sisteminiz Çoklu-Kafa yapılandırmasını destekliyor.\n"
-"Yapılmasını ister misiniz?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Ekran kartı"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Bir ekran kartı seçiniz"
-
-#
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Bir X sunucusu seçiniz"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X sunucusu"
-
-#
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Bir X sürücüsü seçiniz"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X sürücüsü"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hangi XFree86 yapılandırmasını kullanmak istiyorsunuz?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ekran kartınız 3D donanım hızlandırması desteğine sadece XFree %s\n"
-"ile sahip olabilir. Kartınız 2 boyutta daha iyi destek verebilen XFree %s\n"
-"tarafından da desteklenmektedir."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Ekran kartınız XFree %s ile çalıştırıldığında 3D donanım hızlandırması\n"
-"desteÄŸine sahip olabilir."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ile 3D donanım hızlandırması"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ekran kartınız XFree %s ile 3D donanım hızlandırması desteğine sahip\n"
-"olabilir, ANCAK BU DENEYSEL BÄ°R DESTEKTÄ°R VE MAKÄ°NANIZI KÄ°LÄ°TLEYEBÄ°LÄ°R."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ile deneysel 3D donanım hızlandırması"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ekran kartınız sadece XFree %s ile 3D donanım hızlandırması desteğine\n"
-"sahip olabilir, ANCAK BU DENEYSEL BÄ°R DESTEKTÄ°R VE MAKÄ°NANIZI "
-"KÄ°LÄ°TLEYEBÄ°LÄ°R.\n"
-"Kartınıza XFree %s tarafından verilen 2D desteği daha iyi durumdadır."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (kurulum ekran sürücüsü)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree yapılandırması"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Ekran kartınızın bellek miktarını seçin"
-
-#
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "X sunucusu için seçenekleri belirtin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Monitörünüzü seçin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitör"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Burada ki iki önemli parametre dikey ve yatay tazeleme hızlarıdır.\n"
-"Seçiminizi yaparken monitörünüzün kapasitesinin üstünde bir seçim\n"
-"yapmamanız oldukça önemlidir, aksi takdirde monitör zarar görebilir.\n"
-"Seçerken bir ikileme düşerseniz, düşük çözünürlükte bir ayar seçin."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Yatay tazeleme hızı"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Dikey tazeleme hızı"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitör yapılandırılmamış"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ekran kartı henüz yapılandırılmadı"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Çözünürlük henüz seçilmedi"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Yapılandırmanızı denemek ister misiniz?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Uyarı: Bu grafik kartı denenirken makinanız kilitlenebilir"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Yapılandırmanın denenmesi"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bazı parametreleri değiştirmeyi deneyin"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Bir hata oluÅŸtu:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniye sonra çıkılıyor"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Bu ayarlar doÄŸru mu?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Bir hata oluştu, bazı parametreleri değiştirmeyi deneyin"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Çözünürlük"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Çözünürlüğü ve renk derinliğini belirtin"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ekran kartı: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 sunucusu: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Daha"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Tamam"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Uzman kipi"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Hepsini Göster"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Çözünürlükler"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavye yerleÅŸimi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Fare türü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Fare aygıtı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitör: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitörün Yatay Tazelemesi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitörün Dikey Tazelemesi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ekran kartı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Ekran kartı kimliği: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ekran kartı belleği: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Renk derinliÄŸi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Çözünürlük: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 sunucusu: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 sürücüsü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window yapılandırması hazırlanıyor"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ne yapmak istiyorsunuz?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitörü Değiştir"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ekran kartını değiştir"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Sunucu seçeneklerini değiştir"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Çözünürlüğü değiştir"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Bilgileri göster"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Tekrar dene"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Çıkış"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"DeÄŸiÅŸiklikler kaydedilsin mi?\n"
-"Şu an ki yapılandırma:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Açılışta X"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Bilgisayarınız otomatik olarak X'le açılması için ayarlanabilir.\n"
-"Açılışta X Window ile başlamak ister misiniz?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Lütfen değişiklikleri etkinleştirmek için tekrar %s'e giriş yapın"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lütfen çıkın ve Ctrl-Alt-BackSpace tuşlarına basın"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 renk (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 bin renk (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 bin renk (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon renk (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyar renk (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB veya daha fazla"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standart VGA, 60 Hz'de 640x480 "
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Süper VGA, 56 Hz'de 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Uyumlu, 87 Hz'de titreÅŸimli 1024x768 (800x600 yok)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Süper VGA, 87 Hz'de titreşimli 1024x768, 56 Hz'de 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Geliştirilmiş Süper VGA, 60 Hz'de 800x600, 72 Hz'de 640x480"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "TitreÅŸimsiz SVGA, 60 Hz'de 1024x768, 72 Hz'de 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Yüksek Frekanslı SVGA, 70 Hz'de 1024x768"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "60 Hz'de 1280x1024 yapabilen çoklu frekans"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "74 Hz'de 1280x1024 yapabilen çoklu frekans"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "76 Hz'de 1280x1024 yapabilen çoklu frekans"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "70 Hz de 1600x1200 yapabilen Monitör"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "76 Hz de 1600x1200 yapabilen Monitör"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Önyükleme bölümünün ilk sektörü"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektörü (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Kurulumu"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Önyükleyiciyi nereye kurmak istiyorsunuz?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Kurulumu"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "Metin tabanlı LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "Grafik tabanlı LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Windows' dan açılış (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Önyükleyici ana seçenekleri"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Kullanılacak önyükleyici"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Önyükleyici kurulumu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Önyükleme Aygıtı"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (eski BIOS'larda çalışmaz)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Sıkışık"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "sıkışık"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Ekran kipi"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Öntanımlı görüntünün yüklenmesinden önceki gecikme"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Parola"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Parola (tekrar)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Komut satırı seçeneklerini kısıtla"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "kısıtla"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "/tmp dizinin her açılışta temizle"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Gereken bellek (%d MB bulundu)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Birden çok profil'e izin ver"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Bellek boyutunu Mb cinsinden veriniz"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"\"Komut satırı seçeneklerini kısıtla\" seçeneği parolasız bir işe yaramaz"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Lütfen tekrar deneyin"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Parolalar uyuÅŸmuyor"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init Ä°letileri"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Gömülü Sistem Gecikmesini Aç"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Çekirdek Önyükleme Zaman Aşımı"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD den açılış etkinleştirilsin mi?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF açılışı etkinleştirilsin mi?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Öntanımlı İşletim Sistemi?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Burada ki seçeneklere yenilerini ekleyebilir\n"
-"ya da mevcut olanları değiştirebilirsiniz."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ekle"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Bitti"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "DeÄŸiÅŸtir"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ne tür bir giriş yapmak istiyorsunuz?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "DiÄŸer iÅŸletim sistemleri (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "DiÄŸer iÅŸletim sistemleri (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "DiÄŸer iÅŸletim sistemleri (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Görüntü"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Kök"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Sonuna ekle"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Oku-yaz"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tablo"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Güvensiz"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Öntanımlı"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-boyutu"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Görüntüsüz"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Girdiyi sil"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "BoÅŸ etiket kabul edilemez"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Bir çekirdek belirtmelisiniz"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Bir kök disk bölümü belirtmelisiniz"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Bu etiket kullanımda"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s arayüzü bulundu"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Başka var mı?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hiç %s arayüzü var mı?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Hayır"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Evet"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Donanım bilgilerine bak"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s %s kartı için sürücü yüklenmesi"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modül %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hangi %s sürücüsü denensin?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bazı durumlarda, %s sürücü düzgün çalışmak için fazladan bilgi isteyebilir.\n"
-"Sürücüler için fazladan bir özellik belirtmek mi istersiniz, yoksa\n"
-"sürücülerin gerekli bilgiler için donanımınızı tanımasını mı istersiniz?\n"
-"Bazen tanımlama makinanızı kilitleyebilir ama kilitlenmeden dolayı\n"
-"makinanıza herhangi bir zarar gelmez."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Otomatik Algıla"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Seçenekleri belirtin"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"%s modülü için seçenekleri şimdi verebilirsiniz.\n"
-"Gireceğiniz adresler '0x123' gibi 0x öneki ile verilmelidir."
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"İsterseniz şimdi %s modülünün parametrelerini belirtebilirsiniz.\n"
-"Parametreler``isim=değer isim2=değer2...'' şeklinde olmalıdır.\n"
-"Örneğin ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modül seçenekleri:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s modülü yüklenemedi.\n"
-"Tekrar baÅŸka parametrelerle denemek ister misiniz?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "X uygulamalarına erişim"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "rpm araçlarına erişim"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "\"su\" izni"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "yönetsel dosyalara erişim"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s zaten ekli)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Zayıf bir parola seçtiniz!"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Lütfen bir kullanıcı adı verin"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Kullanıcı adında sadece küçük harfler, sayılar, `-' ve `_' karakterleri "
-"bulunabilir"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Bu kullanıcı adı daha önce eklenmiş"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Kullanıcı ekle"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir kullanıcı girin\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Kullanıcıyı etkinleştir"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Gerçek adı"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Kullanıcı adı"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Kabuk"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Simge"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Otomatik giriÅŸ"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Bilgisayarınız açıldığında otomatik olarak bir kullanıcı girişi\n"
-"olması sağlanabilir. Bu özelliği kullanmak ister misiniz?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Öntanımlı kullanıcıyı belirtin:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Çalıştırmak istediğiniz pencere yöneticisini seçin:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Lütfen kullanılacak dili seçiniz."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Kurulumdan sonra kullanabileceğiniz başka diller de seçebilirsiniz"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tümü"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Tüm kullanıcılara izin ver"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Özel"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Paylaşımsız"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "%s paketinin kurulması gerekiyor. Kurulmasını ister misiniz?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "NFS ya da Samba kullanarak sunabilirsiniz. Hangisini isterseniz"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Zorunlu %s paketi eksik"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Ä°ptal"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "userdrake'i çalıştır"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Kullanıcılar paylaşım için \"fileshare\" grubunu kullanır.\n"
-"Bu gruba bir kullanıcı eklemek için userdrake aracını kullanabilirsiniz."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Crackers'a HoÅŸ Geldiniz"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Zayıf"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standart"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Yüksek"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Daha Yüksek"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoyak"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu seviye RAID'i dikkatli kullanmanızı öneririz. Sisteminiz daha kolay \n"
-"kullanılacak, ancak güvenliğiniz azalacaktır: Parola ile erişim mümkün\n"
-"olmadığından Internet'e ya da bir ağa bağlıysanız kullanılmamalıdır."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parolalar etkinleştirildi, yine de bir ağ üzerinde kullanmamanız tavsiye "
-"edilir."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Internet'e bağlı bir makina için standart ve önerilen bir güvenlik "
-"seviyesidir."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr "Zaten her gece çok sayıda otomatik denetim ve bazı kısıtlamalar var."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Bu güvenlik seviyesiyle sistemin bir sunucu olarak kullanımı mümkündür.\n"
-"Güvenlik, birden fazla istemcinin bağlanmasına izin verecek şekilde "
-"artırılmıştır. Bilgi: Bu makina ile Internet'e sadece istemci olarak "
-"bağlanacaksanız daha düşük bir seviye seçmeniz önerilir."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Önceki seviyeye ek olarak sistem dışarıdan gelecek bağlantılara karşı "
-"tamamen\n"
-"kapalıdır. Güvenlik en yüksek seviyededir."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Güvenlik seviyesini seçin"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Güvenlik seviyesi"
-
-#
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Sunucular için libsafe kullanılsın"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Tampon bellek taşmaları ve biçem dizgesi saldırılarına karşı savunma "
-"kitaplığı."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s isletim sistemi secim programina hos geldiniz!\n"
-"\n"
-"Yukarida ki listeden bir isletim sistemi seciniz\n"
-"ya da ontanimli olanin acilmasi icin %d saniye bekleyiniz.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Ä°sletim sistemi secici GRUB'a hos geldiniz!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Bir secenegi isaretli duruma getirmek icin %c ve %c tuslarini kullaniniz."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Sistemi secili isletim sistemiyle acmak icin enter,\n"
-"acilistan "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"once komutlari duzenlemek icin 'e',\n"
-"komut satiri icin ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek ile %d saniye icinde sistem acilacak."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot içinde yeterli yer yok"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Masaüstü"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Başlat Menüsü"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Açılış yükleyicisini %s bölümüne yükleyemezsiniz\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "bu konuda yardım bulunmamaktadır.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Önyükleme Yapılandırması"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Dosya"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Dosya/Çı_kış"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Yeni Tarz Ekran Sınıflaması"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Yeni Tarz Ekran"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Geleneksel Ekran"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Geleneksel Gtk+ Ekran"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora her açılışta çalıştırılsın"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/Grub kipi"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot kipi"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"%s Önyükleme Yöneticisi kullanıyorsunuz.\n"
-"Ayar sihirbazını çalıştırmak için 'Yapılandır'a tıklayın."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Yapılandır"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistem Kipi"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "X-Pencere sistemi açılışta çalıştırılsın"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Hayır, Otomatik giriş istemiyorum"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Evet, otomatik girişi bu özelliklerle istiyorum (kullanıcı,masaüstü)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "TAMAM"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "\"/etc/inittab\" dosyası okumak için açılamıyor: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "kB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d dakika"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 dakika"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d saniye"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Disk bölümlemesi yapılmadan ekran örnekleri alınamaz."
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ekran örnekleri %s kurulduktan sonra mümkün olacak"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Fransa"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kosta Rika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belçika"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Çek Cumhuriyeti"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Almanya"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Yunanistan"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norveç"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "İsveç"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Hollanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Ä°talya"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Avusturya"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "ABD"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Önce verinizin yedeğini alınız"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Dikkatli Okuyun!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot'u kullanmayı planlıyorsanız, diskin başlangıcında\n"
-"boş disk alanı (2048 sektör yeterli) bırakmayı ihmal etmeyin."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Hata"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Sihirbaz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Birini seçin"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tek bir büyük FAT disk bölümünüz var\n"
-"(genellikle MS DOS/Windows tarafından kullanılır).\n"
-"Öncelikle bu disk bölümünün boyutunu değiştirmenizi\n"
-"öneriyoruz. Önce bölümün üzerine, sonra \"Yeniden\n"
-"Boyutlandır\" düğmesine tıklayınız"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Lütfen bir bölüm üzerine tıklayın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Ayrıntılar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Günlük FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Takas"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "BoÅŸ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "DiÄŸer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Dosya sistemi türü:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "OluÅŸtur"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Türü"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerine ``%s'' kullanın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Sil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Önce ``Ayır''ı kullanın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölümünün türü değiştirildikten sonra, üzerindeki tüm bilgiler "
-"silinecektir"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Bir disk bölümü seçiniz"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Bir başka disk bölümü seçiniz"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Çıkış"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Uzman kipine geç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Normal kipe geç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Yine de devam edilsin mi?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Kaydetmeden Çık"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Bölümlendirme tablosunu kaydetmeden mi çıkıyorsunuz?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "/etc/fstab deÄŸiÅŸikliklerini kaydetmek istiyor musunuz ?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Otomatik bölümle"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Tümünü Temizle"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Sabit Disk bilgisi"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Tüm birincil disk bölümleri kullanıldı"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Başka disk bölümü eklenemez"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Daha fazla bölüm oluşturmak için, bir bölümü silip mantıksal bölüm oluşturun"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Bölümlendirme tablosunu kaydet"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Bölümlendirme tablosunu eski durumuna getir"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Bölümlendirme tablosunu kurtar"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Bölümlendirme tablosunu yeniden yükle"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Kaldırılabilir ortam otomatik bağlanıyor"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Dosya seç"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Yedek bölümlendirme tablosu aynı değil\n"
-"Yine de devam etmek istiyor musunuz?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Uyarı"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Dİsket sürücüye bir disket yerleştirin\n"
-"Bu disketteki tüm bilgileriniz silinecektir"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Bölümlendirme tablosu kurtarılmaya çalışılıyor"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Ayrıntılı bilgi"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Bağlama noktası"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Seçenekler"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Yeniden Boyutlandır"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Taşı"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Biçemle"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "BaÄŸla"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "RAID'e ekle"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "LVM'e ekle"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ayır"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "RAID'den kaldır"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LVM'den kaldır"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID'i deÄŸiÅŸtir"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback için kullan"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Yeni bölüm oluştur"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Başlangıç sektörü: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "MB cinsinden boyut: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Dosya sistemi türü: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Bağlama noktası: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Tercih: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Loopback dosyası kaldırılsın mı ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Bölüm türünü değiştir"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hangi dosya sistemini istiyorsunuz?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ext2 yi ext3 e çevir"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%s loopback dosyasını nereye bağlamak istiyorsunuz?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s aygıtını nereye bağlamak istiyorsunuz?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Bu bağlama noktası loopback için kullanıldığından kaldırılamaz.\n"
-"Önce loopback kaldırılmalıdır."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT dosya sistemi sınırları hesaplanıyor"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Yeniden boyutlandırılma"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Bu bölüm tekrar boyutlandırılabilir değil"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölümdeki tüm bilgiler yedeklenmelidir"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s yeniden boyutlandırıldıktan sonra üzerindeki tüm bilgiler silinecektir"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Yeni boyutu belirtin"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "MB olarak yeni boyut: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hangi diske taşımak istiyorsunuz?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektör"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hangi sektöre taşımak istiyorsunuz?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Taşınıyor"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Bölüm taşınıyor..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Eklemek için mevcut bir RAID seçin"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "yeni"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Eklemek için mevcut bir LVM seçin"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ismi?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk bölümü loopback için kullanılamaz"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback dosya ismi: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Bir dosya ismi verin"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Dosya başka bir loopback tarafından kullanılıyor,\n"
-"başka bir tane seçin"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Dosya zaten var. Kullanılsın mı?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Bağlama seçenekleri"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Çeşitli"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "aygıt"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "seviye"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "parça boyutu"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Dikkatli olun: bu iÅŸlem tehlikelidir."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Ne tür bir bölümleme istiyorsunuz?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Önyükleme bölümü bu sürücünün üstünde oluşturulamaz (1024. silindirden "
-"sonra).\n"
-"Bu durumda ya LILO ve bir önyükleme bölümü kullanmayabilirsiniz ya da\n"
-"çalışmayabileceğini gözönüne alarak LILO kullanmayı deneyebilirsiniz."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Kök (/) olarak seçtiğiniz bölüm 1024. silindirden sonra ve bir önyükleme\n"
-"bölümünüz yok. LILO önyükleme yöneticisini kullanmak istiyorsanız,\n"
-"önyükleme bölümünü eklemeyi ihmal etmeyin."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Bir yazılım RAID bölümünü kök dizini (/) olarak atadınız.\n"
-"Hiçbir önyükleyici önyükleme bölümü olmadan bunu çalıştıramaz.\n"
-"Bu nedenle bir önyükleme bölümü eklemeyi ihmal etmeyin."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sürücüsünün bölümlendirme tablosu diske yazılacak!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni ayarların etkinleşmesi için sistemi yeniden başlatmalısınız"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "%s bölümü biçemlendirilirken üzerinde ki tüm bilgiler silinecektir"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Biçemlendiriliyor"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Loopback dosyası biçimlendiriliyor: %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Biçemlendirilen bölüm: %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Dosyaları gizle"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Dosyalar yeni bölüme taşınsın"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"%s dizini zaten biraz veri içeriyor\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Dosyalar yeni bölüme taşınsın"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s kopyalanıyor"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s siliniyor"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "%s bölümü şimdi %s olarak biliniyor"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Aygıt: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sürücü harfi: %s (sadece tahmin)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Türü: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ä°sim: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Başlangıç: sektör %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Boyut: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektör"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "%d. silindirden %d. silindire kadar\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Biçemlendirilmiş\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Biçemlendirilmemiş\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Bağlandı\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback dosyası:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Öntanımlı olarak yüklenecek bölüm\n"
-"    (MS-DOS açılışı için, lilo için değil)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Seviye %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Parça boyutu %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskleri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback dosyası ismi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Şans işte!, bu disk bölümü\n"
-"bir Aygıt bölümüdür ve büyük\n"
-"ihtimalle onu tek başına\n"
-"bırakacaksınız.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bu, çok önyüklemeli sistemler\n"
-"için özel bir önyükleme bölümüdür.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Boyut: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometri: %s silindir, %s kafa, %s sektör\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Bilgi: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskleri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölümlendirme tablosu türü: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d veriyolunda, %d kimlikli\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Seçenekler: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Dosya sistemi parolası"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Dosya sisteminizin parolasını seçiniz"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Bu parola çok basit (en az %d karakterlik olmalı)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Parolalar uyuÅŸmuyor"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Parola"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Parola (tekrar)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Türünü değiştir"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Lütfen bir ortam seçin"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Sunucuları ara"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s biçimlemesinde %s bölüm hatası"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s bölümünün %s türünde nasıl biçemlendirileceği bilinmiyor"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "%s bölümü %s dizinine bağlanamadı"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck %d çıkış kodu veya %d sinyali ile başarısız oldu"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrılırken hata: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "basit"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr ile"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "sunucu"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB dan küçük disk bölümlerinde JFS kullanamazsınız"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB dan küçük disk bölümlerinde ReiserFS kullanamazsınız"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Bağlama noktaları / ile başlamalıdır"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Bağlama noktası %s olan bir bölüm zaten var\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Bir LVM Havuzunu %s bağlantı noktası olarak kullanmazsınız."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu dizin kök dosya sistemi içinde kalmalı"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Bu bağlama noktası için gerçek bir dosya sistemi (ext2, reisrfs) gerekiyor.\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "%s bağlama noktası için parolalı dosya sistemi kullanamazsınız"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Otomatik bölümleme için boş alan yetersiz"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Yapacak bir ÅŸey yok"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "%s yazmak için açılırken hata: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Bir hata oluştu. Yeni dosya sisteminin oluşturulacağı geçerli bir sürücü "
-"bulunamadı. Bu sorunu çözmek için donanımınızı kontrol edin"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Hiç disk bölümünüz yok!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux çok kullanıcılı bir sistemdir, yani her kullanıcının kendi\n"
-"tercihleri, kendi dosyaları, v.s. olabilir. Daha fazla bilgi edinmek için\n"
-"\"Kullanıcı Kılavuzu\"nu okuyunuz. Sistem Yöneticisi olan \"root\" "
-"dışındaki\n"
-"kullanıcılar kendi dosyaları ve yapılandırmaları dışında hiçbir şeyi\n"
-"değiştiremezler. Kendiniz için en az bir normal kullanıcı oluşturmalısınız.\n"
-"Bu hesabı sıradan işler için kullanacaksınız. Sisteminizi \"root\" olarak\n"
-"kullanmak çok pratik gibi görünse de aslında çok tehlikelidir. En küçük bir\n"
-"yanlışlık sisteminizin çalışmamasıyla sonuçlanabilir. Ama normal kullanıcı\n"
-"olarak bir sürü yanlış da yapsanız sadece kendi bilgilerinize zarar vermiş\n"
-"olursunuz, sisteminize zarar veremezsiniz.\n"
-"\n"
-"Önce gerçek isminizi girmelisiniz. Bu zorunlu değildir. İstediğiniz bir "
-"zaman\n"
-"bu işlemi yapabilirsiniz. DrakX girdiğiniz ilk sözcüğü \"Kullanıcı ismi\"\n"
-"olarak alacaktır. Bu isim ile sisteme giriş yapacaksınız. İsterseniz\n"
-"deÄŸiÅŸtirebilirsiniz. Sonra buraya bir parola gireceksiniz. Bir normal\n"
-"kullanıcının parolası \"root\" parolası kadar önemli değildir.\n"
-"\n"
-"\"Kullanıcıyı etkinleştir\" seçtikten sonra isterseniz başka kullanıcılarda\n"
-"ekleyebilirsiniz. Örneğin arkadaşlarınızı, babanızı, kardeşinizi birer\n"
-"kullanıcı olarak ekleyebilirsiniz. Tüm kullanıcıların eklenmesini\n"
-"bitirdiğinizde \"Bitti\" seçerek buradan çıkınız. \n"
-"\"İleri Ayarlar\" düğmesi ile kullanıcıların kullanacağı \"kabuk"
-"\" (öntanımlı\n"
-"olarak bash) deÄŸiÅŸtirilebilir."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yukarıdakiler, sabit diskinizde bulunan Linux bölümleridir. Genel kullanım\n"
-"için sihirbazın sunduğu seçenekleri değiştirmeden bırakabilirsiniz.\n"
-"Seçenekleri değiştirirseniz, en azından bir kök dizini (\"/\") tanımlamak\n"
-"zorundasınız. Lütfen çok küçük bir bölüm seçmeyin, istediğiniz tüm\n"
-"uygulamaları kurabilmek için yeterli yer bulamayabilirsiniz. Verilerinizi\n"
-"ayrı bir bölümde saklamak isterseniz, ayrıca bir \"/home\" bölümü\n"
-"tanımlamanız gerekecektir. (Birden fazla Linux bölümü tanımlıysa bu işlem\n"
-"gerçekleşebilir.)\n"
-"\n"
-"\n"
-"Her bir bölüm şöyle listelenmiştir: \"İsim\", \"Kapasite\".\n"
-"\n"
-"\n"
-"\"İsim\" şöyle kodlanmıştır: \"sabit disk türü\", \"sabit disk harfi\"\n"
-"\"bölüm numarası\" (örneğin \"hda1\").\n"
-"\n"
-"\n"
-"\"Sabit disk türü\", diskiniz bir IDE sürücüsüyse \"hd\",\n"
-"bir SCSI sürücüsüyse \"sd\"'dir.\n"
-"\n"
-"\n"
-"\"Sabit disk harfi\" her zaman \"hd\" ya da \"sd\"'den sonra gelir. IDE\n"
-"sürücüleri için:\n"
-"\n"
-"   * \"a\" birincil IDE denetleyicisindeki master sabit disk,\n"
-"\n"
-"   * \"b\" birincil IDE denetleyicisindeki slave sabit disk,\n"
-"\n"
-"   * \"c\" ikincil IDE denetleyicisindeki master sabit disk,\n"
-"\n"
-"   * \"d\" ikincil IDE denetleyicisindeki slave sabit disk,\n"
-"\n"
-"\n"
-"SCSI sürücüleri için\n"
-"  * \"a\" \"birincil sabit disk\",\n"
-"  * \"b\" \"ikincil sabit disk\"\n"
-"  * ... anlamına gelir."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux kurulum CD'leri bir kaç CD'den oluşur. DrakX seçilen paketin\n"
-"hangi CD'de olduğunu bilir ve o CD'yi yerleştirmeniz için CD yuvasını açar."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Bundan sonra sisteminize hangi uygulamaları kuracağınızı belirteceksiniz.\n"
-"Mandrake Linux sisteminde kullanılabilecek binlerce paket vardır ve onları "
-"hep aklınızda tutamazsınız.\n"
-"\n"
-"CD'den kurulum yapıyorsanız önce elinizde hangi CD'lerin bulunduğunu\n"
-"belirmelisiniz (sadece uzman kipinde). CD isimlerine bakarak ilgili\n"
-"kutucukları işaretleyin.\n"
-"Bitirdiğinizde \"Tamam\" seçerek kuruluma devam ediniz.\n"
-"\n"
-"Paketler kullanım amaçlarına göre gruplanmış ve bu gruplar dört bölümde\n"
-"toplanmıştır: \n"
-"  * \"İş istasyonu\": makinasını bir iş istasyonu olarak ya da evde "
-"kullanmayı\n"
-"                      tasarlayanlar için.\n"
-"\n"
-"  *  \"Geliştirme\": makinanızı program geliştirme amacıyla kullanmak\n"
-"                     istiyenler için.\n"
-"\n"
-"  *      \"Sunucu\": makinanızı bir sunucu olarak kullanmayı "
-"tasarlıyorsanız\n"
-"                     çok kullanılan hizmetlerden hangilerini sunacağınızı\n"
-"                     bu paketlerden seçerek belirleyebilirsiniz.\n"
-"\n"
-"  * \"Grafik Ortam\": burada tercih ettiğiniz grafik ortamı seçeceksiniz.\n"
-"                      Bir grafik ortamlı iş istasyonu için en az bir grafik\n"
-"                      ortam belirlemelisiniz.\n"
-"\n"
-"Farenizi bir grup isminin üzerine götürdüğünüzde grup hakkında kısa bir\n"
-"açıklama göreceksiniz. Güncelleme değilde sıfırdan kurulum yapıyorsanız ve\n"
-"tüm grupların kurulmamasını seçmişseniz, en az yer kaplayan bir kurulum\n"
-"için size bazı seçenekler sunulacaktır:\n"
-"\n"
-"  * \"X olsun\": En az paket kurulumuyla çalışan bir masaüstü kurar.\n"
-"\n"
-"  * \"Temel bilgiler\": Linux sisteminizi çalıştırabilmek için sadece\n"
-"                 konsol için gereken en az sayıda belge kurulacaktır.\n"
-"                 Bu paketler 65Mb yer kaplar.\n"
-"\n"
-"Sistem üzerinde tam denetim sağlayabilen eski Linux kullanıcıları\n"
-"\"Tek tek paket seçimi\" kutucuğunu işaretleyerek kurulacak paketleri\n"
-"kendileri seçebilirler.\n"
-"\n"
-"\"Güncelleme\" kipinde kurulum başlattıysanız ve hiç bir yeni paketin\n"
-"kurulmamasını istiyorsanız tüm grupları seçilmemiş duruma getirebilirsiniz.\n"
-"Bu işlem mevcut sisteminizin onarımı için elverişlidir."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Son olarak, tek tek paket seçimini etkinleştirdiyseniz, paketleri gruplar\n"
-"ve alt gruplar şeklinde sıralanmış bir ağaçtan seçebilirsiniz. Ağacı\n"
-"tarayarak grup, alt grup ya da tek tek paket seçimleri yapabilirsiniz.\n"
-"\n"
-"Bir paketi seçtiğinizde sağ tarafta paket hakkında kısa bir açıklama "
-"görünür.\n"
-"Paket seçimini bitirdiğinizde \"Kur\" düğmesi ile kurulum işlemini\n"
-"başlatabilirsiniz. Kurulum için gereken süre donanım hızınıza ve seçtiğiniz\n"
-"paket sayısına  bağlıdır. Kurulumun tahmini bitme süresi bir gösterge ile\n"
-"gösterilecektir. Bu arada koltuğunuza yaslanıp çayınızı ya da kahvenizi\n"
-"yudumlayabilirsiniz.\n"
-"\n"
-"<ÖNEMLİ> İster bilerek ister belli bir grubun parçası olarak, sunucu\n"
-"bölümünden seçtiğiniz hizmetleri gerçekten kullanıp kullanmak istemediğiniz\n"
-"ayrıca sorulacaktır. Mandrake Linux başlatıldığında kurulu olan hizmetlerin\n"
-"herbiri öntanımlı olarak başlatılır. Onlar Mandrake Linux dağıtıma girerken\n"
-"kılavuzlarından güvenli oldukları anlaşılarak seçilmiş bile olsalar,\n"
-"dağıtımdan sonra bir takım güvenlik açıkları keşfedilmiş olabilir.\n"
-"Bir hizmetin ne sunduğu hakkında bir fikriniz yoksa ya da neden kurmak\n"
-"gerektiğini bilmiyorsanız \"Hayır\", listelenen hizmetlerin kurulmasını\n"
-"ve otomatik olarak başlatılmasını istiyorsanız \"Evet\" düğmesine\n"
-"tıklayınız. </ÖNEMLİ>\n"
-"\n"
-"Kurulum programının bağımlı paketleri kendiliğinden saptayıp kurması ve\n"
-"uyarı diyaloğunun görünmemesi için basitçe \"Otomatik Bağımlılıklar\"\n"
-"seçeneğini etkinleştirebilirsiniz. Kurulumun başarıyla tamamlanması ve\n"
-"kurulan paketlerin sorunsuz çalışabilmesi için bu paketlerin bağımlı\n"
-"olduğu paketlerin de kurulması gerekir.\n"
-"\n"
-"Listenin altındaki küçük disket simgesi önceki kurulumda seçilen paketlerin\n"
-"kurulmasını sağlar. Bu simgeye tıkladığınızda önceki kurulumun sonunda\n"
-"oluşturulan bir disketin sürücüye takılması istenecektir. Bu disketin nasıl\n"
-"oluşturulacağını öğrenmek için kurulumun son adımının ikinci ipucuna bakınız."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Internet ve ağ bağlantılarınızın ayarlarının yapılacağı bölümdesiniz.\n"
-"Makinanızı bir yerel ağa ya da Internet'e bağlayacaksanız \"Tamam\" "
-"düğmesini\n"
-"seçiniz. Bu, modeminizin ve ağ kartınızın otomatik algılanması işlemini\n"
-"başlatacaktır. Ancak,algılama işlemi başarılı olmazsa \"Otomatik bul\"\n"
-"seçeneğini iptal edin. Tabii ki, ağ yapılandırmanızı kurulumdan sonra "
-"kendiniz yapmak da isteyebilirsiniz. Bu durumda \"İptal\" düğmesini "
-"seçiniz.\n"
-"\n"
-"Bağlantı türleri: Geleneksel modem, ISDN modem, ADSL bağlantısı, kablo "
-"modem\n"
-"ve son olarak basit LAN bağlantısı (Eternet).\n"
-"\n"
-"Burada her yapılandırmanın ayrıntısına girilmeyecektir. Gerekli bilgileri\n"
-"Internet Servis Sağlayıcı'nızdan ya da Ağ Yöneticinizden sağlayabilirsiniz.\n"
-"\n"
-"Internet bağlantısının yapılandırılması hakkındaki bilgileri kılavuzda\n"
-"bulabilirsiniz. Ya da sistem kurulumu tamamlandıktan sonra kılavuzda\n"
-"açıklandığı gibi bağlantınızı yapılandırabilirsiniz.\n"
-"\n"
-"Ağınızın yapılandırmasını kurulum bittikten sonra kendiniz yapmak\n"
-"istiyorsanız \"İptal\" düğmesine tıklayabilirsiniz."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Şimdi, açılış sırasında otomatik olarak başlamasını istediğiniz hizmetleri\n"
-"seçebilirsiniz.\n"
-"\n"
-"Burada şu an ki kurulum sırasında kullanabileceğiniz tüm hizmetler\n"
-"listelenmiştir. Her birini dikkatle okuyun ve açılış sırasında başlamasını\n"
-"istemediğiniz hizmetleri seçilmemiş duruma getirin.\n"
-"\n"
-"Bir hizmet seçildiğinde o hizmetin ne sunduğunu belirten kısa bir açıklama\n"
-"verilecektir. Bir hizmetin ne sunduğu hakkında bir fikriniz\n"
-"yoksa ayarına dokunmadan olduğu gibi bırakmak en güvenli yöntemdir.\n"
-"\n"
-"Eğer makinanızı bir sunucu olarak kullanacaksanız bu adımda *dikkatli*\n"
-"olmalısınız:\n"
-"!!\n"
-"Muhtemelen kullanmak istemediğiniz hiçbir hizmeti başlatmak istemezsiniz.\n"
-"Bir sunucuda açık duruma getirilen hizmetlerin her birinin aslında bir\n"
-"güvenlik açığı olabileceğini lütfen unutmayınız.\n"
-"Genel olarak, sadece ihtiyacınız olan hizmetleri seçmeye dikkat ediniz.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux zamanı GMT'ye (Greenwich Zamanı) göre saat farkını baz alarak\n"
-"ayarlar. Donanım saati ile sistem saati arsında fark olmamasını "
-"istiyorsanız,\n"
-"\"Donanım saatini GMT'ye göre ayarla\" seçeneğini seçilmemiş "
-"bırakabilirsiniz.\n"
-"Bu makinanızda Windows gibi başka bir işletim sistemini de kullanıyorsanız\n"
-"faydalıdır.\n"
-"\n"
-"Sistem saatinizin Internet'teki bir zaman sunucusundan otomatik olarak\n"
-"ayarlanmasını isterseniz \"Otomatik saat ayarı\" seçeneğini "
-"etkinleÅŸtiriniz.\n"
-"Listeden size en yakın sunucuyu seçebilirsiniz. Şüphesiz bu özelliği\n"
-"kullanabilmeniz için internet bağlantınızın olması gereklidir. Bu özellik\n"
-"ayrıca yerel ağınızdaki makinaların zamanlarını sizin makinanızdan\n"
-"ayarlamalarını sağlayacak bir zaman sunucusunu da kuracaktır."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (X Pencere Sistemi) Mandrake Linux ile birlikte gelen tüm masaüstü\n"
-"yöneticileri (KDE, GNOME, AfterStep, WindowMaker, v.s.) için GNU/Linux\n"
-"grafik arayüzünün kalbidir. Bu adımda DrakX , X'i otomatik olarak\n"
-"yapılandırmaya çalışacaktır.\n"
-"\n"
-"Donanımınız çok eski ya da çok yeni ise büyük ihtimalle başarısız "
-"olacaktır.\n"
-"Başarılı olduğu takdirde monitörünüzün ve ekran kartınızın en iyi "
-"sunabildiÄŸi\n"
-"çözümle X'i otomatik olarak başlatacak ve bir pencere görüntüleyerek bu\n"
-"pencereyi görüp görmediğinizi soracaktır.\n"
-"\n"
-"Bu iletiyi görür ve \"Evet\" düğmesine tıklarsanız sonraki adıma "
-"geçeceksiniz.\n"
-"Bu iletinin görünmemesi yapılandırmanın yanlış olduğu anlamındadır ve\n"
-"10 saniyelik beklemenin ardından bir seçim yapılmadığında deneme "
-"bitirilerek\n"
-"önceki ekrana geri dönülür.\n"
-"\n"
-"\"Uzman\" kurulumu yapıyorsanız otomatik yapılandırma yerine X yapılandırma\n"
-"sihirbazına gireceksiniz. Bu sihirbaz hakkında daha ayrıntılı bilgi edinmek\n"
-"için kılavuzda ki ilgili bölümü okuyabilirsiniz."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"X yapılandırmasını ilk kez deniyorsanız, ekranı size pek kullanışlı\n"
-"gelmeyebilir (küçük, sağa ya da sola kaymış bir ekran). X doğru olarak\n"
-"başlatıldıktan sonra, DrakX yapılandırmanın sizce uygun olup olmadığını\n"
-"soracaktır. Ayrıca geçerli kiplerin bir listesini sunarak yapılandırmanızı\n"
-"değiştirebilmeniz için birini seçmenizi isteyecektir.\n"
-"\n"
-"Hala X çalışmıyorsa, son çare olarak \"Ekran kartını değiştir\" seçtikten "
-"sonra \"listelenmemiş kart\" seçin ve hangi sunucuyu kullanmak istediğiniz\n"
-"sorulduğunda ise \"FBDev\" seçin. Bu, her modern ekran kartıyla çalışabilen\n"
-"son çare bir X sunucusudur. Emin olmak için \"Tekrar dene\" seçiniz."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Son olarak açılış sırasında grafik arayüzle başlamak isteyip istemediğiniz\n"
-"sorulacaktır. Yapılandırmanızı denemeyi seçmemiş bile olsanız bu soru yine "
-"de\n"
-"sorulacaktır. Ekranınızı iyi yapılandıramamışsanız ya da makinanızın bir\n"
-"sunucu rolü üstlenmesini seçmişseniz bu soruya \"Hayır\" cevabı vermeniz\n"
-"önerilir."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CD'si içinde bir kurtarma kipi bulunmaktadır. Kurtarma "
-"kipine\n"
-"CD'den başlatırken »F1« tuşuna bastıktan sonra isteğiniz sorulduğunda\n"
-"»rescue« yazarak erişebilirsiniz. Ancak bu seçimle makinanız CD'den\n"
-"açılmaz, bunun yerine en az iki olasılıktan birini seçmeniz gerekir:\n"
-"\n"
-" * Önyükleyicinin ana diskinizin ilk sektörüne yazılması (başka bir açılış\n"
-"   yöneticisi kullanmıyorsanız): GNU/Linux ve Windows aynı makina üzerinde\n"
-"   kurulu ise ve Windows'u yeniden kurmak gerektiğinde MS kurulum programı\n"
-"   diskin önyükleme bölümünü yeniden yazdığından GNU/Linux başlatılamaz.\n"
-"\n"
-" * Herhangi bir sebepten dolayı GNU/Linux sabit diskten açılmıyorsa bir\n"
-"   açılış disketi ile sisteminizi açabilirsiniz. Elektrik kesintisi, hatalı\n"
-"   bir işlem sonucu olarak, bir parola sorunu ya da öngörülmeyen bir "
-"sebeple\n"
-"   sisteminiz açılış sırasında bir noktadan daha ileri gidemiyorsa\n"
-"   sisteminizi kurtaracak araçları içeren bu disketi kullanabilirsiniz.\n"
-"\n"
-"Bu son adımı seçerseniz sizden sürücüye bir disket yerleştirmeniz\n"
-"istenecektir. Bu disket boş olmalı ya da size gerekecek bilgiler\n"
-"içermemelidir. DrakX disketi yazmayı bitirdikten sonra artık o disketi\n"
-"biçemlendiremeyeceksiniz."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Bu noktada, Mandrake Linux iÅŸletim sisteminizi sabit diskinizde\n"
-"nereye kuracağınızı seçmeniz gerekiyor. Diskiniz boşsa, ya da\n"
-"halihazırda bir işletim sistemi diskin tamamını kullanıyorsa\n"
-"diski bölümlendirmeniz gerekmektedir. Temel olarak, bir diski\n"
-"bölümlendirmek, Mandrake Linux sistemini kurabilmek için onu\n"
-"mantıksal olarak bölmek ve böylece boş alan oluşturmak anlamına\n"
-"gelir.\n"
-"\n"
-"Bölümlendirme işleminin etkilerinin geri dönülmezliği yüzünden\n"
-"bu işlem, eğer tecrübesizseniz, korkutucu ve stresli bir iş olabilir.\n"
-"Mandrake Linux, bu işlemi oldukça kolaylaştıran bir sihirbaz sunmaktadır.\n"
-"Başlamadan önce lütfen kılavuzu okuyun.\n"
-"\n"
-"Uzman kipinde kurulum yapıyorsanız Mandrake Linux Disk Bölümlendirme Aracı\n"
-"DiskDrake'i kullanabilirsiniz. DiskDrake hakkında ayrıntılı bilgi edinmek\n"
-"için kılavuzun ilgili bölümünü okuyabilirsiniz. Ayrıca kurulum arayüzünden\n"
-"dialoğun \"Sihirbaz\" düğmesine tıklayarak burada açıklanan sihirbazları da\n"
-"kullanabilirsiniz.\n"
-"\n"
-"Önceki bir Linux kurulumunda ya da başka bir sistemin disk bölümlendirme\n"
-"aracını kullanarak disk bölümlendirmenizi zaten yapmışsanız Linux\n"
-"sisteminizi kurmak için basitçe bir disk bölümü seçiniz.\n"
-"\n"
-"Disk bölümlendirmesi yapılmamışsa sihirbazı kullanarak bu bölümleri\n"
-"oluşturabilirsiniz. Sabit disk yapılandırmanıza bağlı olarak aşağıdaki\n"
-"seçeneklerden birini kullanabilirsiniz:\n"
-"\n"
-" * \"Boş alan kullanılsın\": bu seçenek ile boş sabit disklerinizden biri\n"
-"   üzerinde otomatik bölümlendirme yapılacak, size bir şey sorulmayacaktır.\n"
-"\n"
-" * \"Mevcut disk bölümü kullanılsın\": sihirbazın sabit diskinizde bulduğu\n"
-"   Linux disk bölümlerinden birini kullanmak istiyorsanız bu seçeneği\n"
-"   kullanın.\n"
-" * \"Windows'un bulunduğu bölümdeki boş alan kullanılsın\": sabit "
-"diskinizde\n"
-"   MS Windows kurulu ve diskin tamamı ona ayrılmışsa ancak diskte boş yer\n"
-"   varsa bu seçeneği kullanarak boş kalan yerde Linux disk bölümü\n"
-"   oluşturulabilir. Bunu yapmak için MS Windows'u silebilir (\"Tüm Diski\n"
-"   sil\" veya \"Uzman kip\" çözümlerini kullanarak) ya da MS Windows disk\n"
-"   bölümünü yeniden boyutlandırabilirsiniz. Yeniden boyutlandırma veri\n"
-"   kaybına sebep olmadan gerçekleştirilebilir. Makinanızda hem MS Windows\n"
-"   hem de Mandrake Linux kullanacaksanız bu çözümü kullanmanız önerilir.\n"
-"\n"
-"   Bu seçeneği kullanacaksanız bu işlemden sonra MS Windows için ayrılan\n"
-"   yerin azalacağını gözönüne almanız gerekir.\n"
-"\n"
-" * \"Tüm diski sil\": bu seçeneği kullanarak sabit diskinizdeki tüm veriyi "
-"ve\n"
-"   disk bölümlerini kaldırabilir yerine Mandrake Linux sistemini\n"
-"   yerleştirebilirsiniz. Seçimi onayladıktan sonra artık geri dönüş mümkün\n"
-"   olmayacağını bu seçeneği kullanırken aklınızdan çıkarmayın.\n"
-"\n"
-"   !! Bu seçeneği kullandığınız takdirde diskinizdeki tüm verilerinizi\n"
-"   kaybedeceksiniz. !!\n"
-"\n"
-" * \"Windows'u Sil\": bu seçenek ile sabit diskinizdeki herşey silinecek ve\n"
-"   temiz bir disk üzerine yeniden bölümlendirme yapılacaktır.\n"
-"\n"
-"   !! Bu seçeneği kullandığınız takdirde diskinizdeki tüm verilerinizi\n"
-"   kaybedeceksiniz. !!\n"
-"\n"
-" * \"Uzman kipi\": sabit diskiniz kendiniz elle bölümlendirmek istiyorsanız\n"
-"   bu seçeneği kullanabilirsiniz. Bu çözümü seçmeden önce dikkatli olun.\n"
-"   Güçlü bir çözüm olduğu kadar tehlikelidir de. Tüm verilerinizi kolayca\n"
-"   kaybedebilirsiniz. Bu nedenle ne yaptığınızı tam olarak bilmediğiniz\n"
-"   sürece bunu seçmeyin."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Buraya kadar geldiyseniz kurulum tamamlanmış ve GNU/Linux sisteminizi\n"
-"kullanmaya hazırsınız demektir. \"TAMAM\" düğmesine tıkladığınızda "
-"sisteminiz\n"
-"yeniden başlatılacaktır. Hem Windows hem de GNU/Linux kullanımını "
-"seçtiyseniz\n"
-"makinanızın her açılışında bu sistemlerden biri için tercihinizi\n"
-"kullanabileceksiniz.\n"
-"\n"
-"\"Gelişmiş\" düğmesine (Uzman kipinde görünür) tıkladığınızda size iki\n"
-"seçenek sunulacaktır:\n"
-"\n"
-" * \"Otomatik kurulum disketi oluşturulsun\": yaptığınız kuruluma benzer "
-"bir\n"
-"   kurulumu herhangi bir yardım gerekmeksizin otomatik olarak "
-"yapılabilmesini\n"
-"   saÄŸlayacak bir kurulum disketi oluÅŸturabilirsiniz.\n"
-"\n"
-"   Bu seçeneği kullanmaya karar verdiğinizde size iki seçenek sunulacaktır:\n"
-"\n"
-"    * \"Etkileşimli\": bu sadece disk bölümlemesinin etkileşimli olduğu "
-"yarı\n"
-"      otomatik kurulumdur.\n"
-"\n"
-"    * \"Otomatik\": sabit diskin tamamen silinip yeniden yazılması\n"
-"      ile kurulumu tamamen otomatik olarak gerçekleştirebilirsiniz.\n"
-"\n"
-"      Bu seçenek aynı sistemi çok sayıda makinaya kurmak için çok\n"
-"      kullanışlıdır. Web sitemizde ki \"Auto install\" bölümünde daha\n"
-"      ayrıntılı bilgi edinebilirsiniz.\n"
-"\n"
-" * \"Paket seçim listesini kaydet\"(*): kurulum sırasında seçtiğiniz\n"
-"   paketlerin listesi kaydedilir. Bir başka kurulum sırasında disketi\n"
-"   sürücüye yerleştirdikten sonra [F1] tuşuna bastıktan sonra\n"
-"   »linux defcfg=\"floppy\"« yazarak kurulumu yardım ekranına kadar "
-"ilerletin\n"
-"\n"
-"   (*) Bu seçenek için FAT biçemli bir diskete ihtiyacınız olacak. Bu "
-"disketi\n"
-"   GNU/Linux altında \"mformat a:\" komutu ile oluşturabilirsiniz."
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Yeni tanımlanmış her bölüm, kullanım için biçemlendirilmelidir.\n"
-" (Biçemlendirmek bir dosya sistemi oluşturmak anlamına gelir.)\n"
-"\n"
-"\n"
-"Şimdi, halihazırda bulunan bölümlerinizdeki verileri silmek için onları\n"
-"tekrar biçemlendirmek isteyebilirsiniz. Bunu istiyorsanız, biçemlendirmek\n"
-"istediğiniz bu bölümleri de ayrıca seçili duruma getirin.\n"
-"\n"
-"Eskiden kalma tüm bölümlerin biçemlendirilmesi gerekmediğini lütfen\n"
-"unutmayın. İşletim sistemi içerenleri (örneğin \"/\", \"/usr\" ya da \"/var"
-"\"\n"
-"gibi) biçemlendirmelisiniz, ama sadece verilerinizin bulunduğu bölümleri\n"
-"biçemlendirmeyebilirsiniz. (örneğin \"/home\".)\n"
-"\n"
-"Biçemlendireceğiniz bölümleri seçerken dikkatli olun, içlerindeki tüm "
-"veriler\n"
-"yok olacaktır ve biçemlendirildikten sonra geri dönülmesi mümkün değildir.\n"
-"\n"
-"Bölümleri biçemlendirmeye hazır olduğunuzda \"Tamam\"'a tıklayın.\n"
-"\n"
-"Mandrake Linux sisteminizi kurmak isteyeceğiniz başka bölümler de seçmek\n"
-"isterseniz \"İptal\"'e basın.\n"
-"\n"
-"\"Gelişmiş\" düğmesine tıkladıktan sonra isterseniz, sabit diskinizindeki\n"
-"disk bölümlerinde hatalı blok sınaması yapabilirsiniz."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Yeni Mandrake Linux işletim sisteminiz şu anda diske yazılıyor. Bu işlem\n"
-"birkaç dakika sürecektir. (Bu süre, seçtiğiniz kurulumun büyüklüğüne\n"
-"ve donanımınızın hızına bağlıdır.)\n"
-"\n"
-"Lütfen bekleyin."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Mandrake Linux kurulumunuz sırasında dağıtımdan sonra güncellenmiş bazı "
-"paketler, düzeltmeler ve çözümlenmiş güvenlik unsurlarının olup olmadığını "
-"internet bağlantınız üzerinden kontrol edip varsa indirip kurabilir. Çalışan "
-"bir internet bağlantınız varsa \"Evet\" seçebilir, yoksa \"Hayır\" seçerek "
-"paket güncelleme işlemini kurulum sonrasına bırakabilirsiniz.\n"
-"\n"
-"\"Evet\" seçtiğinizde güncellemelerin alınabileceği yerlerin bir listesi "
-"gösterilir. Size en yakın olanı seçtikten sonra, paket seçim ağacı görünür. "
-"Seçimi izleyebilir ve seçilen paketlerin indirilip kurulması için \"Kur\", "
-"çıkmak için \"İptal\" seçebilirsiniz."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Devam etmeden önce lisans koşullarını dikkatle okumalısınız. Lisans tüm\n"
-"Mandrake Linux dağıtımını kapsar, bu koşullarını kabul etmiyorsanız \"Red\"\n"
-"düğmesine tıklayarak kurulumdan çıkabilirsiniz. Kuruluma devam etmek için\n"
-"\"Kabul\" düğmesine tıklayınız."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Şimdi, makinanız için düşündüğünüz güvenlik seviyesini belirteceksiniz. "
-"Kural\n"
-"olarak makinanızda sakladığınız bilgilere bağlı olarak güvenlik seviyesini\n"
-"yükselmek gerekir. Güvenlik seviyesi yükseldikçe sunulan hizmetlerin sayısı\n"
-"düşecek ve sisteminizi kullanmak zorlaşacaktır. Bu seviyeler hakkında daha\n"
-"fazla bilgi edinmek için ``Başvuru Kılavuzu''ndaki MSEC bölümüne bakınız.\n"
-"\n"
-"Ne seçeceğiniz hakkında bir fikriniz yoksa öntanımlı seçeneklere "
-"dokunmayınız."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu noktada, Mandrake Linux iÅŸletim sisteminizi sabit diskinizde nereye\n"
-"kuracağınızı seçmeniz gerekiyor. Bölümler önceki bir kurulumda ya da bir\n"
-"başka bölümlendirme aracıyla önceden tanımlanmışsa eski bölümlerinizi\n"
-"kullanabilirsiniz. Aksi takdirde, sabit disk bölümlerinin tanımlanması\n"
-"gerekir.\n"
-"\n"
-"Bölümleri oluşturmak için bir sabit disk seçmelisiniz. \"hda\"'ya\n"
-"tıklayarak ilk, \"hdb\"'ye tıklayarak ikinci IDE sürücüsünü, ya da\n"
-"\"sda\"'ya tıklayarak birinci SCSI sürücüsünü bölümlendirmek için\n"
-"seçebilirsiniz.\n"
-"\n"
-"Seçili sürücüyü bölümlendirmek için, aşağıdaki seçenekleri\n"
-"kullanabilirsiniz:\n"
-"\n"
-" * \"Tümünü temizle\": seçili sürücüdeki tüm bölümler silinecektir.\n"
-"\n"
-" * \"Otomatik bölümlendir\": sabit diskinizdeki boş alanda otomatik\n"
-"     olarak ext2 ve takas bölümlerinin tanımlanmasını sağlayacaktır.\n"
-"\n"
-" * \"Daha\": Bu seçenekle aşağıdaki özellikleri de kullanabilirsiniz:\n"
-"\n"
-"   * \"Diskete kaydet\": bölümlendirme tablonuzu diskete kaydetmek "
-"isterseniz\n"
-"     bu seçeneği kullanın. İleride disk bölümlendirme tablosunu kurtarmak\n"
-"     için bu disketi kullanabilirsiniz.\n"
-"\n"
-"   * \"Disketten al\": önceki bir kurulumda bölümlendirme tablonuzu bir\n"
-"     diskete kaydettiyseniz, bu seçenek ile onu tekrar kullanabilirsiniz.\n"
-"\n"
-"   * \"Bölümlendirme tablosunu kurtar\": bölümlendirme tablosu hasar "
-"gördüyse\n"
-"     bu seçeneği kullanarak onu kurtarabilirsiniz. Lütfen dikkatli olun ve\n"
-"     başarısız olma ihtimali olduğunu hatırlayın.\n"
-"\n"
-"   * \"Geri al\": bu seçeneği kullanarak, daha önce yaptığınız\n"
-"     değişikliklerden vazgeçebilirsiniz.\n"
-"\n"
-"   * \"Disket/CD sürücüsünü otomatik bağla\": bu seçeneği seçilmemiş duruma\n"
-"     getirerek bu sürücülerin bağlanmasını sistem kullanıcılarının\n"
-"     kendilerinin yapmasını sağlayabilirsiniz.\n"
-"\n"
-"   * \"Sihirbaz\": sabit diskinizi bölümlendirme işlemi için sihirbazı\n"
-"     kullanmak isterseniz, bu seçeneği kullanabilirsiniz. Bölümlendirme\n"
-"     hakkında fazla bir bilgiye sahip değilseniz bu seçeneği kullanmanız\n"
-"     önerilir.\n"
-"\n"
-"   * \"Geri al\": bu seçeneği kullanarak, yaptığınız tüm değişiklikleri\n"
-"     geri alıp eski bölümlendirme tablosunu yükleyebilirsiniz.\n"
-"\n"
-"   * \"Normal/Uzman kipi değiştirme\": disk bölümlendirme sırasında "
-"daha      az ya da daha fazla seçenek ve bilgi sunulur.\n"
-"\n"
-"   * \"Bitti\": sabit diskinizi bölümlendirme işlemi bittiğinde\n"
-"     değişikliklerinizin kaydedilebilmesi için bu seçeneği kullanın.\n"
-"\n"
-"Klavyeyi kullanarak herhangi bir seçeneğe gidebilirsiniz: Bölümler\n"
-"arasında gezinmek için [Sekme] ve [Yukarı/Aşağı] ok tuşlarını\n"
-"kullanabilirsiniz.\n"
-"\n"
-"Bir bölüm seçildiğinde, aşağıdaki tuşları kullanabilirsiniz:\n"
-"\n"
-"           * yeni bir bölüm oluşturmak için (boş bir bölüm seçildiğinde)\n"
-"             Ctrl-c;\n"
-"\n"
-"           * bir bölümü silmek için Ctrl-d;\n"
-"\n"
-"           * bağlama noktasını atamak için Ctrl-m\n"
-"\n"
-"Başka dosya sistemleri hakkında bilgi edinmek için \"Başvuru Kılavuzu"
-"\"ndaki\n"
-"ext2fs bölümünü okuyunuz.\n"
-"\n"
-"Bir PPC makina üzerine kurulum yapıyorsanız, yaboot önyükleyicisi "
-"tarafından\n"
-"kullanılmak üzere en az 1MB lık küçük bir HFS \"önyükleme\" bölümü "
-"oluÅŸturmak\n"
-"isteyeceksiniz. Bu disk bölümünü biraz daha büyük, örneğin 50MB yaparsanız\n"
-"bir yedek çekirdeğin ve kurtarma açılışı gereksinimleri için ramdisk\n"
-"görüntüsünün saklanacağı kullanışlı bir alan elde edebilirsiniz."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sabit diskinizde birden fazla Windows bölümü bulundu. Yeni Mandrake Linux\n"
-"işletim sisteminizi kurmak için hangi bölümün boyutunu değiştirmek\n"
-"istiyorsunuz?\n"
-"\n"
-"\n"
-"Her bir bölüm şöyle listelenmiştir; \"Linux adı\", \"Windows adı\",\n"
-"\"Kapasite\".\n"
-"\n"
-"\"Linux adı\" şöyle kodlanır: \"sabit disk türü\", \"sabit disk harfi\", \n"
-"\"bölüm numarası\" (örneğin \"hda1\").\n"
-"\n"
-"\"Sabit disk türü\", diskiniz bir IDE sürücüsüyse \"hd\", bir SCSI "
-"sürücüsüyse\n"
-"\"sd\"'dir.\n"
-"\n"
-"\n"
-"\"Sabit disk harfi\" her zaman \"hd\" ya da \"sd\"'den sonra gelir. IDE\n"
-"sürücüleri için:\n"
-"\n"
-"   * \"a\"   \"birincil IDE denetleyicisindeki master sabit disk \",\n"
-"\n"
-"   * \"b\"   \"birincil IDE denetleyicisindeki slave sabit disk \",\n"
-"\n"
-"   * \"c\"   \"ikincil IDE denetleyicisindeki master sabit disk \",\n"
-"\n"
-"   * \"d\"   \"ikincil IDE denetleyicisindeki slave sabit disk \",\n"
-"\n"
-"\n"
-"SCSI sürücüleri için\n"
-"   * \"a\"   \"birincil sabit disk\",\n"
-"   * \"b\"   \"ikincil sabit disk\"\n"
-"   * ... anlamına gelir.\n"
-"\n"
-"\"Windows adı\" ise diskinizin windows altındayken kullandığı sürücü "
-"harfidir.\n"
-"(Örneğin ilk disk ya da disk bölümünün ismi \"C:\"dir."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Lütfen bekleyin. Bu işlem birkaç dakika sürecektir."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX'e bir öntanımlı \"Önerilen\" kurulum mu yoksa üzerinde daha fazla\n"
-"denetim saÄŸlayabileceÄŸiniz \"Uzman\" kurulumunu mu tercih edeceÄŸinizi\n"
-"belirtmelisiniz. Ayrıca yeni bir kurulum mu yapacağınızı yoksa mevcut\n"
-"sisteminizi güncellemek mi istediğinizi de belirtmelisiniz. \"Kurulum\"\n"
-"seçerek eski sisteminizi tamamen yok edebilir ya da \"Güncelleme\"\n"
-"seçerek mevcut sisteminizi güncelleyebilir ya da kurtarabilirsiniz.\n"
-"\n"
-" * \"Kurulum\": Eski sistemi tamamen kaldırır. Ancak, başka disk "
-"bölümlerinde\n"
-"   bulunan mevcut sistemlerinize dokunulmaz \n"
-"\n"
-" * \"Güncelleme\": Mandrake Linux'un eski bir sürümünü güncellemek ya da\n"
-"   onarmak için faydalıdır. Mevcut disk bölümlerine ve mümkün olduğunca\n"
-"   kullanıcı ayarlarına dokunulmaz. Temiz bir kurulumun sağlanması için\n"
-"   diğer yapılandırma adımları uygulanır.\n"
-"\n"
-" * \"Sadece Paketleri Güncelle\": Eski Mandrake Linux sisteminizin\n"
-"   yapılandırması bozulmadan sadece kullanılan paketler güncellenir.\n"
-"   Ayrıca yeni paketlerin kurulması da mümkündür.\n"
-"\n"
-"Paket güncellemeleri Mandrake Linux sistemlerinin \"8.1\" dağıtımından beri\n"
-"mümkün olmaktadır.\n"
-"\n"
-"Mandrake Linux işletim sistemini kurmak ya da güncellemek için GNU/Linux\n"
-"hakkındaki deneyiminize bağlı olarak aşağıdaki düzeylerden birini\n"
-"seçebilirsiniz:\n"
-"\n"
-"\n"
-" * \"Önerilen\": daha önce hiçbir GNU/Linux işletim sistemi kurmadıysanız\n"
-"   bunu seçin. Kurulumda çok az soru sorulacak ve çok kolay olacaktır.\n"
-"\n"
-" * \"Uzman\": GNU/Linux hakkında oldukça bilgili ve deneyimliyseniz bunu\n"
-"   seçebilirsiniz. Uzman kurulumu sisteminizi özelleştirebilmeniz için\n"
-"   cevaplandırılması GNU/Linux'u az bilenler için çok güç olabilecek\n"
-"   sorularla kurulumu yönlendireceğinden bu sorulara cevap verebilecek\n"
-"   kadar iyi olmadığınız kanaatindeyseniz bu seçeneği kullanmayın."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalde seçtiğiniz dile bağlı olarak DrakX, doğru klavyeyi seçecektir.\n"
-"Ancak dilinizle ilişkili olmayan bir klavye seçmek de isteyebilirsiniz.\n"
-"Örneğin Türkçe konuşan biri olmanıza rağmen Almanya'da ikamet ediyorsanız\n"
-"Türkçe klavyeyi kullanmak isteyebileceğiniz gibi Türkçe Q ya da Türkçe F\n"
-"klavyelerden birini seçmek de isteyebilirsiniz. Her iki durumda da bu "
-"adımdan\n"
-"geriye gidip listeden kullanmak istediğiniz klavyeyi seçebilirsiniz.\n"
-"\n"
-"\"Başka\" düğmesine tıklayarak desteklenen klavyelerin tam listesini\n"
-"görebilirsiniz."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Lütfen kurulumda ve kurulumdan sonra sisteminizde kullanacağınız dili "
-"seçin.\n"
-"\n"
-"\"Gelişmiş\" düğmesine tıkladığınızda makinanızda kurulmasını istediğiniz\n"
-"diğer dilleri de seçmeniz sağlanacaktır. Bu dilleri seçtiğinizde kurulum\n"
-"sırasında belgelerden ve uygulamalardan bu dillerde olanları varsa onlar\n"
-"kurulacaktır. Örneğin Alman kullanıcıların sisteminizi kullanmasına izin\n"
-"verecekseniz, ana dili Türkçe seçtikten sonra Gelişmiş bölümünde\n"
-"\"Almanca|Almanya\" seçebilirsiniz.\n"
-"\n"
-"Çok sayıda dil seçimi yapıyorsanız, ek dil seçiminden sonra \"Tamam\"\n"
-"düğmesine tıklayarak kuruluma devam edebilirsiniz."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Öntanımlı olarak DrakX, iki düğmeli fare kullandığınızı ve 3. düğmenin "
-"taklit\n"
-"edilmesini istediğiniz varsayımına göre yapılandırılmıştır. DrakX otomatik\n"
-"olarak kullandığınız farenin PS/2 mu, seri mi yoksa USB fare mi olduğunu\n"
-"saptayacaktır.\n"
-"\n"
-"Farklı bir fare türü seçmek isterseniz listeden bu fareyi seçebilirsiniz.\n"
-"\n"
-"Öntanımlı fare dışında bir fare seçtiğiniz takdirde seçiminizi denemeniz "
-"için\n"
-"bir deneme ekranı açılacaktır. Farenizi hareket ettirerek ve düğmelere\n"
-"basarak seçiminizin doğruluğunu deneyebilirsiniz. Fareniz doğru "
-"çalışmıyorsa\n"
-"boşluk çubuğuna basarak ya da \"İptal\" düğmesi üzerinde ENTER tuşlayarak\n"
-"ekrandan çıkıp tekrar seçim yapabilirsiniz."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Lütfen doğru portu seçiniz. Örneğin, MS Windows'da ki \"COM1\"in karşılığı\n"
-"GNU/Linux'ta \"ttyS0\", \"COM2\"nin karşılığı \"ttyS1\"dir."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"GNU/Linux sisteminizin güvenliği için çok önemli karar noktasındasınız:\n"
-"\"root\" parolasını gireceksiniz.\n"
-"\"root\" sistem yöneticisidir ve güncellemeler, kullanıcıların eklenmesi,\n"
-"sistemin yapılandırılması, v.s. için en yetkili kullanıcıdır. Kısaca,\n"
-"\"root\" herşeyi yapabilir! Bu nedenle tahmin edilmesi çok zor olan bir\n"
-"parola seçmelisiniz. - DrakX bu parolanın seçim kriterlerinde size yardımcı\n"
-"olarak bu zor kararı kolaylaştıracaktır. Göreceğiniz gibi bir parola\n"
-"vermemeyi de seçebilirsiniz. Fakat tek bir sebep gösterek bu kararı "
-"almamanız\n"
-"sağlanacaktır: GNU/Linux'un diğer işletim sistemlerinden farkı normal\n"
-"kullanıcılarının sisteme zarar verememelerinin sağlanmış olmasıdır. Sisteme\n"
-"zarar verebilecek tek kullanıcı \"root\"dur. Bu bakımdan sistemde\n"
-"\"root\" kullanıcısı olmak zorlaştırılmalıdır.\n"
-"\n"
-"Parolayı çok uzun ve çok karmaşık yapmayın ki hatırlaması zor olmasın.\n"
-"\n"
-"Parolayı yazarken ekranda görmeyeceksiniz. Bu bakımdan yazdığınızın\n"
-"doÄŸruluÄŸunu ancak yeniden yazarak anlayabilirsiniz. Ä°kincisini yazarken\n"
-"hata yaparsanız DrakX sizi uyaracaktır. Ama hatayı ikisinde de yapar ve\n"
-"farkında olmazsanız bu \"yanlış\" parola ile sisteme giriş yapAMAmak\n"
-"zorunda kalabilirsiniz.\n"
-"\n"
-"Uzman kipte NIS ya da LDAP gibi bir kimlik kanıtlama sunucusuna bağlanıp\n"
-"bağlanmayacağınız sorulacaktır.\n"
-"\n"
-"Ağınızda kimlik sınaması için \"LDAP\" (ya da \"NIS\") protokolü\n"
-"kullanılıyorsa ilgili protokolü seçmelisiniz. Bu konuda bilginiz yoksa\n"
-"ağ yöneticinize danışın.\n"
-"\n"
-"Makinanız herhangi bir yönetimli ağa bağlanmayacaksa, kimlik kanıtlama için\n"
-"\"Yerel dosyalar\"ı seçeceksiniz."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO ve grub GNU/Linux'un önyükleyicileridir. Bu adım normalde otomatiktir.\n"
-"Bu adımda DrakX, diskin önyükleme bölümünü çözümler ve aşağıdaki işlemleri\n"
-"gerçekleştirir:\n"
-"\n"
-" * MS Windows önyükleme sektörü varsa, sektörün içeriği grub/LILO ile\n"
-"   deÄŸiÅŸtirilir. Bu iÅŸlem hem GNU/Linux hem de diÄŸer iÅŸletim sistemi\n"
-"   ile makinanızı kullanabilmenizi sağlar.\n"
-"\n"
-" * Bir grub ya da LILO önyükleme sektörü varsa, içeriği yeni önyükleyici "
-"ile\n"
-"   deÄŸiÅŸtirilecektir.\n"
-"\n"
-" * Bir ikilemde, DrakX bir dialog ile sizden yardım isteyecektir:\n"
-"\n"
-"  * \"Kullanılacak önyükleyici\" için üç seçenek sunulacaktır: \n"
-"    * \"Grafik arayüzlü LILO\"\n"
-"\n"
-"    * \"GRUB\" (sadece metin arayüzlü)\n"
-"\n"
-"    * \"Metin arayüzlü LILO\"\n"
-"\n"
-"  * \"Önyükleme aygıtı\": genellikle öntanımlı birincil sabit disk\n"
-"    (\"/dev/hda\") kullanılır. Ancak tercihiniz ikincil sabit disk\n"
-"    (\"/dev/hdb\") ya da disket (\"/dev/fd0\") olabilir.\n"
-"\n"
-"  * \"Öntanımlı sistem yüklenmeden önceki gecikme\": makinanızı\n"
-"    başlattığınız sırada önyükleyici, öntanımlı yüklenecek sistem yerine\n"
-"    baÅŸka bir sistemden baÅŸlatabilmenize olanak saÄŸlayacak bir bekleme\n"
-"    süresi belirtmenize izin verir.\n"
-"\n"
-"!! DİKKAT: Bir önyükleyici kurmamayı seçtiyseniz (\"İptal\" seçerek),\n"
-"           Mandrake Linux sisteminizin yüklenmesini sağlayacak\n"
-"           bir yönteminiz olduğundan emin olmalısınız. Ayrıca bir seçeneği\n"
-"           değiştirirken ne yaptığınızı bildiğinizden de emin "
-"olmalısınız. !!\n"
-"\n"
-"Uzman kullanıcılar daha fazla seçenek elde etmek için \"Gelişmiş\" düğmesini "
-"kullanabilirler.\n"
-"\n"
-"Mandrake Linux gerek GNU/Linux gerekse diÄŸer bir iÅŸletim sisteminden\n"
-"açılış yaapabilmeniz için kendi önyükleyicisini kurar.\n"
-"\n"
-"Makinanızda başka işletim sistemleri de varsa, onlar otomatikman önyükleme\n"
-"menüsüne eklenecektir. Burada sunulan seçeneklerle önyükleyicinin ince\n"
-"ayarlarını yapabilirsiniz. Bir seçenek üzerine çift tıklayarak onun\n"
-"parametrelerini silebilir ya da değiştirebilirsiniz. \"Ekle\" düğmesi ile\n"
-"yeni bir girdi ekleyebilirsiniz. İşlemlerinizi tamamladığınızda \"Bitti\"\n"
-"düğmesine tıklayarak sonraki kurulum adımına geçebilirsiniz."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO ve Grub önyükleyicilerdir: GNU/Linux ya da makinanızda bulunan başka "
-"bir\n"
-"işletim sistemini açabilirler. Normalde bu diğer işletim sistemleri doğru\n"
-"şekilde saptanmış ve kurulmuştur. Eğer bir aksilik olursa, buradan elle\n"
-"eklenebilirler. Parametreleri seçerken dikkatli olun.\n"
-"\n"
-"Ayrıca isterseniz diğer işletim sistemlerine erişim vermeyebilirsiniz\n"
-"Bu durumda ilgili girdileri silebilirsiniz. Fakat bu iÅŸletim sistemlerini\n"
-"kullanabilmek için bu sistemlerin açılış disketlerine sahip olmanız\n"
-"gerektiğini de unutmayınız!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux'u açmak için gereken bilgilerin nereye yerleştirileceğini\n"
-"belirtmelisiniz.\n"
-"\n"
-"Ne yaptığınızdan emin değilseniz, \"Diskin ilk sektörü (MBR)\" seçin."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Burada kullanacağınız yazdırma sistemini seçeceksiniz. Diğer işletim\n"
-"sistemleri bir seçenek sunarken, Mandrake size üç ayrı seçenek sunuyor.\n"
-"\n"
-" * \"PDQ\" - bir ağ yazıcısı kullanmıyorsanız, yazıcının kağıt yemesi\n"
-"   durumunda tekrar yazdırma sorunu yaşamak istemiyorsanız, bir de "
-"makinanıza\n"
-"   doğrudan bağlı bir yazıcınız varsa, 'kuyruğa değil doğrudan yazıcıya\n"
-"   yolla' deme şansınız bulunuyor. 'Bu tam da benim aradığım özellik'\n"
-"   diyorsanız \"PDQ\" seçeneğine tıklayınız. Kurulumdan sonra Mandrake\n"
-"   Kontrol Merkezi'nden PrinterDrake'i çalıştırdıktan sonra uzman düğmesine\n"
-"   tıklayarak seçimlerinizi değiştirebilirsiniz.\n"
-"\n"
-" * \"CUPS\"'Unix Ortak Yazdırma Sistemi' - hem yerel yazıcınızı hem de ağ\n"
-"   üzerindeki bir yazıcıyı kullanabilmenizi sağlayan, mevcut tüm "
-"sistemlerle\n"
-"   uyumlu, eski \"lpd\" yazdırma sistemi için hem sunucu hem de istemci "
-"gibi\n"
-"   davranabilen, basit ama mükemmel bir sistemdir. Çok çeşitli seçenekler\n"
-"   sunmasına rağmen en az \"pdq\" kadar kolay ayarlanabilir. Bir \"lpd\"\n"
-"   sunucusunu taklit etmek isterseniz \"cups-lpd\" artalan uygulamasını\n"
-"   çalıştırabilirsiniz. Yazdırma ve yazıcı seçeneklerini belirlemek için\n"
-"   bir grafik arayüze de sahiptir.\n"
-"\n"
-" * \"lprNG\" - 'Yeni Nesil lpd' - Bu sistem diğerlerinin yaptıklarını\n"
-"   yapabilmekten başka IPX protokolünü de desteklediğinden bir Novell "
-"ağında\n"
-"   bağlı yazıcıları ve komutları kullanmanızı sağlar. Novell ağınızdaki\n"
-"   yazıcıları kullanmak isterseniz ya da ayrı bir veri yolu oluşturmaksızın\n"
-"   komutlara yazdırmak isterseniz lprNG'yi kullanınız. Novell ağında,\n"
-"   deÄŸilseniz daha iyi ve daha basit olduÄŸundan CUPS tercih edilmelidir."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX PCI ve SCSI kartlarınızı tarayarak IDE aygıtlarınızı bulmaya "
-"çalışacak.\n"
-"Eğer bir SCSI arabirimi bulursa otomatik olarak bunun sürücüsünü "
-"kuracaktır.\n"
-"\n"
-"Hiç SCSI arabiriminiz yoksa, bir ISA SCSI kartınız varsa, ya da\n"
-"DrakX'in tanımadığı bir PCI SCSI kartınız bulunuyorsa, sisteminizde bir\n"
-"SCSI kartınızın olup olmadığı sorulacaktır. Bir SCSI kartına sahip "
-"deÄŸilseniz\n"
-"\"Hayır\" düğmesine tıklayın. Emin değilseniz, \"Donanım bilgilerine bak\"\n"
-"seçerek ve \"Tamam\"a tıkladıktan sonra makinanızda saptanan donanımın\n"
-"listesine göz atabilir ve tekrar \"Tamam\" düğmesine tıklayıp SCSI arayüzü\n"
-"sorusuna geri dönebilirsiniz\n"
-"\n"
-"Kartınızı elle tanıtmak zorundaysanız sizden kartınıza uygun seçenekleri\n"
-"belirlemenizi istenecektir. Bu karta özel seçeneklerle DrakX donanımınızı\n"
-"algılamaya ve başlatmaya çalışacaktır. Bu, genellikle çalışır.\n"
-"\n"
-"Eğer çalışmazsa, sürücü seçeneklerini öğrenmeniz gereklidir. İnternet\n"
-"bağlantınız bulunuyorsa, üreticinin web sitesindeki donanım belgelerinden\n"
-"ya da (eÄŸer sisteminizde bulunuyorsa) Microsoft Windows'dan elde edebilir\n"
-"veya bu bilgileri bulabilme ipuçları için 'Kullanma Kılavuzu'ndaki 3.\n"
-"bölümü (\"Donanımınızın Bilgilerinin Toplanması\") okuyun."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Yaboot'a siğer işletim sistemleri, başka çekirdekler ya da acil önyükleme\n"
-"kodu için girdiler ekleyebilirsiniz.\n"
-"\n"
-"Diğer işletim sistemleri için bir etiket ve kök disk bölümü gerekir.\n"
-"\n"
-"Linux için bir kaç seçenek mümkündür:\n"
-"\n"
-" * Label: önyükleme seçeneğini kullanıma sokmak için yaboot komut satırında\n"
-"   girilecek bir isimdir.\n"
-"\n"
-" * Image: bu önyüklenecek çekirdeğin ismi olmalıdır. Genellikle vmlinux ya "
-"da\n"
-"   bir uzantı ile vmlinux'ün alternatifi olan bir isimdir.\n"
-"\n"
-" * Root: Linux kurulumunuzun \"root\" aygıtı ya da \"/\" dır.\n"
-"\n"
-" * Append: Apple donanımında, çekirdek append seçeneği çoğunlukla ekran\n"
-"   donanımını ilklendirmek, klavye fare tuşunun 2. ya da 3. fare düğmesi\n"
-"   olarak kullanılmasını sağlamak için kullanılır. Aşağıda bazı örnekler\n"
-"   verilmiÅŸtir:\n"
-"\n"
-"video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune\n"
-"\n"
-"video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: bu seçenek önyükleme aygıtının modüllerini ya da acil önyükleme\n"
-"   görüntüsü için bir ramdisk görüntüsü yüklemekte kullanılabilir.\n"
-"\n"
-" * Initrd-size: öntanımlı ramdisk uzunluğu genelde 4096 bayttır. Daha büyük\n"
-"   bir ramdisk ayırmak gerekiyorsa bu seçenek kullanılabilir.\n"
-"\n"
-" * Read-write: normalde \"kök\" disk bölümü, sistemin \"açılması\"ndan\n"
-"   önce dosya sistemi denetiminin yapılabilmesi için salt-okunur olarak\n"
-"   bağlanır. Burada bu seçenekle bunu aşabilirsiniz.\n"
-"\n"
-" * NoVideo: Apple donanımı olağandışı sorunlar çıkarabilmektedir. Bu "
-"seçenek\n"
-"   ile yerleşik çerçeve tamponu desteği kullanılarak sistem önyüklenebilir.\n"
-"\n"
-" * Default: yaboot komut satırında sadece ENTER tuşuna basarak öntanımlı\n"
-"   olarak Linux'un önyüklenmesini sağlamak için bu seçeneğe Linux yazılır.\n"
-"   [Sekme] tuşuna basarak önyükleme seçeneklerini görmek istediğinizde\n"
-"   bu alana girilen etiket \"*\" ile belirlenmiş olacaktır."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot, NewWorld MacIntosh donanımı için bir önyükleyicidir. Onunla\n"
-"GNU/Linux, MacOS, ya da MacOSX yüklenebilir. Normalde bu diğer işletim\n"
-"sistemleri doğru saptanır ve kurulur. Bu mümkün olmamışsa, bu ekranda elle\n"
-"girdileri verebilirsiniz. Doğru parametreleri vermeye özen göstermelisiniz.\n"
-"\n"
-"Yaboot seçenekleri:\n"
-"\n"
-" * \"Açılış iletisi\": önyükleyici komut satırından önce gösterilecek basit\n"
-"   bir metindir.\n"
-"\n"
-" * \"Önyükleme Aygıtı\": GNU/Linux'un önyüklemesi için gereken bilgilerin\n"
-"   yerleştirildiği aygıtı belirtir. Genellikle bu bilgiyi saklamak üzere\n"
-"   bir önyükleme disk bölümünü belirtilir.\n"
-"\n"
-" * \"Gömülü Sistem Gecikmesi\": yaboot'da iki gecikme mümkündür. Bu ilk\n"
-"   gecikme saniyelerle ölçülür ve bu noktada CD, Gömülü Sistem, MacOS ya da\n"
-"   Linux açılışları arasında seçim yapılabilir.\n"
-"\n"
-" * \"Çekirdek Önyükleme Zaman Aşımı\": bu zaman aşımı LILO önyükleme\n"
-"   gecikmesine benzer. Linux seçildikten sonra öntanımlı çekirdek tanımı\n"
-"   seçilmeden önce 0.1 saniyelik adımlarla ölçülen bir gecikme sağlanır.\n"
-"\n"
-" * \"CD'den Açılış Etkileştirilsin\": bu seçenek işaretlenmişse\n"
-"   önyükleyicinin ilk komut satırında CD için \"C\" seçebilirsiniz.\n"
-"\n"
-" * \"Gömülü Sistem Açılışı Etkinleştirilsin\": bu seçenek işaretlenmişse\n"
-"   önyükleyicinin ilk komut satırında Gömülü Sistem Açılışı için \"N\"\n"
-"   seçebilirsiniz.\n"
-"   \"Öntanımlı İşletim Sistemi\": Gömülü sistem gecikmesi zaman aşımına\n"
-"   uğradığında öntanımlı olarak yüklenecek işletim sistemini burada\n"
-"   belirteceksiniz."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Burada makinanıza ilişkin donanımınıza bağlı olarak gösterilecek çeşitli\n"
-"parametreler sunulmuÅŸtur:\n"
-"\n"
-" * \"Fare\": kullanmakta olduğunuz fare saptandıktan sonra bu düğmeyi\n"
-"   kullanarak farenizi deÄŸiÅŸtirebilirsiniz.\n"
-"\n"
-" * \"Klavye\": klavye eşlemi yapılandırması saptandıktan sonra bu düğmeyi\n"
-"   kullanarak klavyenizde ilgili deÄŸiÅŸikliÄŸi yapabilirsiniz.\n"
-"\n"
-" * \"Zaman Dilimi\": Öntanımlı olarak seçtiğiniz dile bağlı zaman dilimi\n"
-"   seçilmektedir. Sizin için bu seçim doğru değilse, bu düğmeyi kullanarak\n"
-"   zaman diliminizi deÄŸitirebilirsiniz.\n"
-"\n"
-" * \"Yazıcı\": \"Yazıcı yok\" düğmesine tıkladığınızda yazıcı yapılandırma\n"
-"   sihirbazı açılacaktır.\n"
-"\n"
-" * \"Ses Kartı\": Algılanan ses kartınız burada gösterilir. Kurulum "
-"sırasında\n"
-"   bir değişiklik yapamayacaksınız.\n"
-"\n"
-" * \"TV Kartı\": Sisteminizde bir TV kartı algılanmışsa bunu göreceksiniz.\n"
-"   Ancak kurulum sırasında değişiklik yapamayacaksınız.\n"
-"\n"
-" * \"ISDN Kartı\": Algılanan ISDN kartı varsa bunu göreceksiniz.\n"
-"   Düğmeye tıklayarak ISDN kartınızla ilgili parametrelerde değişiklik\n"
-"   yapabilirsiniz."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Lütfen yeni Mandrake Linux disk bölümünüzü kurmak için silmek istediğiniz\n"
-"sabit diski seçin. Üzerindeki tüm verilerin yok olacağını ve geriye dönüşün\n"
-"mümkün olmayacağını unutmayın!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Bu sabit disk üzerindeki tüm verinin ve bölümlerin silinmesini istiyorsanız\n"
-"\"Tamam\"'a tıklayın. Dikkatli olun, tıkladıktan sonra Windows'daki\n"
-"verileriniz de dahil her ÅŸeyi kaybedeceksiniz.\n"
-"\n"
-"Sabit diskinizdeki hiçbir veriyi ya da bölümü silmeden bu işlemden "
-"vazgeçmek\n"
-"istiyorsanız lütfen \"İptal\"'e tıklayın."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Ayrıca %s biçemlendirilmelidir"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Bu sunucu/sunucuları seçmiştiniz:\n"
-"%s\n"
-"\n"
-"\n"
-"Bu sunucular öntanımlı olarak etkinleştirilecektir. Bilinen bir güvenlik\n"
-"açığı yoktur, ancak dağıtımdan sonra bazı açıklar bulunmuş olabilir.\n"
-"Bu durumda bu sunucuları mümkün olan en kısa sürede güncellemelisiniz.\n"
-"\n"
-"\n"
-"Bu sunucuları gerçekten kurmak istiyor musunuz?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS alanı olmadan yayın kullanamazsınız"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s sürücüsüne FAT(MsDos) biçemli bir disket yerleştiriniz"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Bu disket FAT(MsDos) biçemli değil"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Oluşturduğunuz disketteki bilgilerle kurulum yapacaksanız, kurulumu ``linux "
-"defcfg=floppy'' ile başlatmalısınız."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s dosyası okunurken hata oluştu"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Bilgisayarınızdaki bazı donanımlar çalışmak için \"özgün\" sürücüler\n"
-"gerektiriyor. Bunlar hakkında bilgi bulabileceğiniz adres: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Bir kök disk bölümüne ihtiyacınız var.\n"
-"Bunun için mevcut bir disk bölümünü seçebileceğiniz gibi\n"
-"yeni birini de oluÅŸturabilirsiniz.\n"
-"Bundan sonra da \"Bağlama Noktası\"nı '/' olarak değiştirmelisiniz."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Bir takas disk bölümüne ihtiyacınız var"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Bir takas disk bölümünüz yok\n"
-"\n"
-"Takas alanı çok önemlidir ve bilhassa 2.4 çekirdekler için belleğin\n"
-"iki katına kadar bir takas alanı önerilir!\n"
-"\n"
-"Devam edilsin mi?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "/boot/efi ye bağlanmış bir FAT bölümüne ihtiyacınız var"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Boş alan kullanılsın"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölümleri açmak için yeterli yer yok"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Mevcut disk bölümü kullanılsın"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Kullanılabilecek bir bölüm bulunamadı"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback için Windows bölümü kullanılsın"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linux4Win için hangi disk bölümünü kullanmak istiyorsunuz?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Boyutları seçiniz"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Kök bölümü boyutu (MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Takas bölümü boyutu (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Windows'un bulunduğu bölümdeki boş alan kullanılsın"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hangi bölümü yeniden boyutlandırmak istiyorsunuz?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Windows dosya sistemi sınırları hesaplanıyor"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT boyutlandırıcısı bölümü boyutlandıramıyor,\n"
-"ÅŸu hata oluÅŸtu: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Windows bölümünüz çok dağınık, lütfen önce \"defrag\" ile diskinizdeki "
-"dosyaları bir araya getirin"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UYARI!\n"
-"\n"
-"DrakX Windows disk bölümünüzü yeniden boyutlandıracaktır. Bu işlem\n"
-"tehlikeli olabilir. Daha önce yapmamışsanız kurulumdan çıkın ve Windows\n"
-"altında Scandisk (ve seçimlik olarak defrag) programını çalıştırın. "
-"Ardından\n"
-"kuruluma tekrar devam edin. Verilerinizin yedeğini almayı da unutmayın!\n"
-"Emin olduğunuzda Tamam'a basın."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Windows için"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "%s bölümünde ne kadar yer bırakacaksınız?"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT yeniden boyutlandırması başarısız: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Yeniden boyutlandırılacak ya da loopback olarak kullanılacak \n"
-"hiç FAT bölümü yok (ya da boş alan kalmamış)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Tüm disk silinsin"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "MS Windowsâ„¢ silinsin"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Birden çok sabit diskiniz var, hangisine linux kurmak istiyorsunuz?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s diski üzerindeki TÜM bölümler ve veriler silinecektir"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Özel Disk Bölümlendirme"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Fdisk kullanılsın"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Şimdi %s'i bölümlendirebilirsiniz.\n"
-"İşiniz bittiğinde `w'yi kullanarak değişiklikleri kaydetmeyi unutmayın."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Windows bölümünüzde yeterli boş yeriniz yok"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Kurulum için boş yer bulunamıyor"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Bölümlendirme sihirbazı şu çözümleri buldu:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölümlendirme başarısız: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Ağ bağlanıyor"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ağ ayrılıyor"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Bir hata oluştu, ancak sebebi saptanamadı.\n"
-"Devam edebilirsiniz, ama risk size ait!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Çok sayıda %s bağlama noktası"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Bazı paketlerin kurulumu doğru olarak tamamlanmadı.\n"
-"CDROM sürücünüz sorunlu ya da CD'niz bozuk olabilir.\n"
-"Linux kurulu baÅŸka bir makinada \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-"komutuyla CD'nizi kontrol edebilirsiniz.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s'a HoÅŸ Geldiniz"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Disket sürücünüz yok"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "`%s' adımına başlanıyor\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sistem kaynaklarınız kısıtlı. Mandrake Linux'yi kurarken sorunlarınız\n"
-"olabilir. Bu durum oluşursa, metin tabanlı kurulumu deneyebilirsiniz.\n"
-"Bunun için CDROM'dan açtıktan sonra `F1'e basın, ve komut satırına\n"
-"`text' yazın."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Kurulum Sınıfı"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Lütfen aşağıdaki kurulum sınıflarından birisini seçiniz:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Seçtiğiniz paket gruplarının toplam boyu yaklaşık %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Bu boyuttan daha azını yüklemek isterseniz,\n"
-"kurmak istediğiniz paket yüzdesini seçin.\n"
-"\n"
-"Düşük bir yüzde belirtirseniz sadece çok önemli paketler kurulacaktır.%%100 "
-"belirtirseniz seçtiğiniz bütün paketler kurulacaktır."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sabit diskinizde bu paketlerin sadece %%%d'sini kuracak kadar yer var.\n"
-"\n"
-"Bundan daha azını kurmak isterseniz,\n"
-"%%%d ile kurulabilecek tüm paketler,\n"
-"daha düşük bir yüzde ile ise sadece çok önemli paketler kurulacaktır."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sonra ki adımda daha ayrıntılı bir seçim karşınıza gelecektir."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Kurulacak paketlerin yüzdesi"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paket Grubu Seçimi"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Tek tek paket seçimi"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Toplam boyut: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Hatalı paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ä°sim: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Sürüm: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Boyut: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Önem seviyesi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Yeterli yeriniz kalmadığından bu paketi seçemezsiniz"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Aşağıdaki paketler kurulacaktır"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Aşağıdaki paketler sistemden silinecektir"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Bu paket seçimlik değildir"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu zorunlu bir pakettir, seçmemek olmaz"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi seçimlerinizden çıkaramazsınız. Zaten kurulmuş."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bu paket güncellenmek zorunda\n"
-"Seçimlerinizden çıkarmak istediğinizden emin misiniz?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi seçimlerinizden çıkaramazsınız. Güncellenmek zorunda"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Kendiliğinden seçilen paketleri göster"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Kurulum"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Disketten yükle/Diskete kaydet"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Paket seçimini güncellemesi"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "En küçük Kurulum"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Kurmak istediğiniz paketleri seçin"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Kuruluyor"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Tahminen"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Kalan süre "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Lütfen bekleyin, Kurulum hazırlanıyor"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi kuruluyor"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Kabul"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Red"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Rom'u deÄŸiÅŸtirin!\n"
-"\n"
-"\"%s\" etiketli Cd-Rom'u sürücüye takın ve TAMAM'a basın.\n"
-"Eğer Cd-Rom elinizde yoksa bu Cd-Rom'dan kurmamak için VAZGEÇ'e basın."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Yine de devam edilsin mi?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Paketler düzenlenirken bir hata oluştu:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Paketler kurulurken bir hata oluÅŸtu:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Uyarı\n"
-"\n"
-"Aşağıdaki maddeleri lütfen dikkatle okuyun. Herhangi birine\n"
-"katılmıyorsanız, bir sonraki CD ortamından kurulum yapmanız mümkün\n"
-"değildir. Bu ortamdan kurulum yapmadan devam edebilmek için 'Red'de\n"
-"basınız.\n"
-"\n"
-"\n"
-"Bir sonraki CD'deki bazı uygulamalar GPL Lisansı'na ya da benzer "
-"anlaÅŸmalara\n"
-"tabi değildir. Her parça kendine ait bir lisansın şartları ve durumları\n"
-"tarafından yönlendirilir. Lütfen ilgili lisansı dikkatle okuyup kabul "
-"etmeden\n"
-"bu parçaların dağıtımını yapmayınız.\n"
-"Genel olarak bu tür lisanslar ilgili uygulamanın transferi, kopyalanması\n"
-" (yedekleme amacı dışında nedenlerle), dağıtımı, kodlarının incelenmesi ve\n"
-"değiştirilmesini engeller. Herhangi bir anlaşmazlık, ilgili lisans\n"
-"tarafından verilen haklarınızı yok eder. Özel bir lisans anlaşmasıyla hak\n"
-"sahibi olmadıysanız, ilgili parçaları birden fazla sisteme kuramaz, ağ\n"
-"ortamında çalışmaya adapte edemezsiniz. Herhangi bir şüphe durumunda\n"
-"doğrudan dağıtıcı, ya da uygulamanın yazarıyla iletişim kurunuz.\n"
-"Üçüncü şahıslara transfer ya da dokümanlar da dahil herhangi bir kopyalama\n"
-"genel olarak mümkün değildir.\n"
-"\n"
-"\n"
-"Bir sonraki CD ortamındaki parçaların tüm hakları her bir uygulamanın kendi\n"
-"yazarına aittir. Bu haklar bilgisayar programlarına uygulanan entellektüel\n"
-"özgünlük ve telif hakkı yasalarıyla korunmaktadır.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Bir hata oluÅŸtu"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Gerçekten kurulumdan çıkacak mısınız?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisans anlaşması"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"GiriÅŸ\n"
-"\n"
-"İşletim sistemi, ve Mandrake Linux dağıtımında bulunan farklı parçalar\n"
-"buradan itibaren \"Yazılım Ürünleri\" olarak adlandırılacaktır. Yazılım\n"
-"ürünleri işletim sistemiyle ilgili program kümeleri, yötemleri, kuralları\n"
-"ve dokümanları, Linux-Mandrake'nin farklı parçalarını içermektedir, fakat\n"
-"bunlarla sınırlandırılmamaktadır.\n"
-"\n"
-"\n"
-"1. Lisans Anlaşması\n"
-"\n"
-"Lütfen bu dokümanı dikkatle okuyun. Bu doküman yazılım ürünlerini uygulayan\n"
-"MandrakeSoft S.A. ile sizin aranızdaki lisans anlaşmasıdır. Yazılım\n"
-"ürünlerini, kurulum yaparak, çoğaltarak, ya da herhangi bir amaçla "
-"kullanarak\n"
-"bu Lisans'ın şartlarına uyacağınızı açık ve tam olarak kabul etmiş\n"
-"bulunuyorsunuz. Eğer bu Lisans'ın şartlarını kabul etmiyorsanız, yazılım\n"
-"ürünlerini kurma, çoğaltma ve kullanma hakkınız yoktur. Yazılım ürünlerini\n"
-"lisansın şartlarına uymayacak herhangi bir şekilde kurma, çoğaltma ya da\n"
-"kullanma teşebbüsü, bu lisans altındaki haklarınızı yok edecektir. Lisansın\n"
-"anlaşmasının bozulması durumunda, yazılım ürünlerinin tüm kopyalarını "
-"derhal\n"
-"yok etmeniz gerekmektedir.\n"
-"\n"
-"\n"
-"2. Sınırlı Garanti\n"
-"\n"
-"Yazılım Ürünleri ve yanlarında gelen dokümanlar \"oldukları gibi\"dirler, "
-"ve\n"
-"kanunların izin verdiği açılımda garantisizdirler. MandrakeSoft S.A.,\n"
-"kullanıcının yazılım ürünlerini kullanmak konusunda yetkin olmaması "
-"nedeniyle\n"
-"oluşan (iş kaybı, işin aksaması, maddi kayıp, hukuki cezalara çarptırılma\n"
-"vb. neden olacak) doğrudan ya da dolaylı (MandrakeSoft S.A. bu tür "
-"zararların\n"
-"oluşabileceğini duyursa bile) hiçbir zarar nedeniyle sorumluluk taşımaz.\n"
-"\n"
-"\n"
-"BAZI ÃœLKELERDE YASAKLANMIÅž YAZILIMA SAHÄ°P OLMAYA YA DA ONU KULLANMAYA BAÄžLI\n"
-"SINIRLI SORUMLULUK\n"
-"\n"
-"Kanunların verdiği yetkilere göre, MandrakeSoft S.A. ya da dağıtımcıları\n"
-"kullanıcının, bulunduğu ülkede yasak olduğu halde, yazılım ürünlerini\n"
-"kullanması, onlara sahip olması, onları Mandrake Linux sitelerinden "
-"indirmesi\n"
-"nedeniyle oluşan (iş kaybı, işin aksaması, maddi kayıp, hukuki cezalara \n"
-"çarptırılma vb. neden olacak) doğrudan ya da dolaylı (MandrakeSoft S.A. bu\n"
-"tür zararların oluşabileceğini duyursa bile) hiçbir zarar nedeniyle\n"
-"sorumluluk taşımaz. Bu sınırlı sorumluluk, yazılım ürünleri içindeki güçlü\n"
-"kriptografi araçlarını kapsar, fakat bunlarla sınırlı değildir.\n"
-"\n"
-"\n"
-"3. GPL Lisansı ve İlgili Lisanslar\n"
-"\n"
-"Yazılım ürünleri farklı birçok kişi tarafından oluşturulmuş parçalardan\n"
-"oluşmaktadır. Bu parçaların çoğu GNU Genel Kamu Lisansı (GPL) ya da benzer\n"
-"lisanslara tabidirler. Bu lisansların çoğu, parçaların kullanımına,\n"
-"çoğaltılmasına, değiştirilmesine ya da tekrar dağıtımının yapılmasına izin\n"
-"vermektedir. Lütfen kullanımdan önce her bir yazılım ürünü için, onu\n"
-"ilgilendiren lisans(lar)ın tüm şartlarını okuyunuz. Bir yazılım ürünü\n"
-"hakkındaki herhangi bir soru, MandrakeSoft'a değil, o ürünün "
-"geliÅŸtiricisine\n"
-"yöneltilmelidir. MandrakeSoft tarafından geliştirilmiş yazılımlar GPL\n"
-"lisansıyla korunmaktadır. MandrakeSoft tarafından hazırlanan dokümanlar da\n"
-"özel bir lisansa tabidir. Daha fazla bilgi için lütfen dokümanlara\n"
-"göz atınız.\n"
-"\n"
-"\n"
-"4. Entellektüel Özellik Hakları\n"
-"\n"
-"Yazılım ürünleri üzerindeki tüm haklar bu yazılımın geliştiricisine aittir;\n"
-" yazılıma uygulanan entellektüel özellik ve kopyalama kanunlarıyla\n"
-"korunmaktadırlar. MandrakeSoft, yazılım ürünlerinin, bütün olarak ya da\n"
-"parça parça, herhangi bir amaç için değiştirilme ya da adapte edilme\n"
-"haklarını saklamaktadır. \"Mandrake\", ve \"Mandrake Linux\" ve ilgili\n"
-"logolar MandrakeSoft S.A.'ya ait tescilli markalardır.\n"
-"\n"
-"\n"
-"5. Yönetim Kanunları\n"
-"\n"
-"Bu lisansın herhangi bir kısmı, bir mahkeme tarafından kanunsuz ya da\n"
-"uygunsuz bulunursa, o kısım bu kontrata dahil edilmemiş olacaktır.\n"
-"Diğer kısımların sınırlamaları devam edecektir. Bu lisansın şartları Fransa\n"
-"Kanunları altındadır. Bu lisansın şartlarına her türlü itiraz\n"
-"Paris Mahkemesi tarafından görüşülecektir. Bu doküman hakkında herhangi bir\n"
-"soru için lütfen MandrakeSoft S.A'ya başvurun.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klavye"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Lütfen klavye düzeninizi seçiniz."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Bu desteklenen tüm klavyelerin listesidir"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hangi kurulum sınıfını istiyorsunuz?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Kurulum/Güncelleme"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Bu bir kurulum mu, yoksa bir güncelleme mi?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Önerilen"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Uzman"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Güncelleme"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Sadece paketlerin güncellemesi"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Lütfen kullandığınız farenin türünü seçin."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Fare Portu"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Farenizin bağlı olduğu seri portu seçiniz."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Tuş Emülasyonu"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "2. Tuş emülasyonu"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "3. Tuş Emülasyonu"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar yapılandırılıyor..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE yapılandırması"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "hiç bölüm bulunamadı"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Bağlama noktalarını bulmak için bölümler taranıyor"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Bağlama noktalarını seçin"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Bölümlendirme tablonuz okunamıyor, bozulmuş olabilir :-(\n"
-"Bozulmuş bölümler düzeltilmeye çalışılabilir ama TÜM VERİLERİNİZ yok "
-"olacak!\n"
-"Diğer bir çözüm de DrakX'in bölümlendirme tablosunu değiştirmesine izin\n"
-"vermemektir. (hata: %s)\n"
-"\n"
-"Tüm bölümleri kaybetmeye razı mısınız?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake bölümlendirme tablosunu okumakta başarısız oldu.\n"
-"Kendiniz devam edebilirsiniz."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-" 1 MB lık önyükleme bölümünün oluşturulması için disk başlangıcında yeterli "
-"alan yok! Kurulum devam edecektir fakat açılış için DiskDrake'i kullanarak "
-"bir önyükleme disk bölümü oluşturmanız gerekecek"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Güncelleme yapılacak hiç bir kök disk bölümü bulunamadı"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Kök (root) Bölümü"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Sisteminizin kök (/) bölümü hangisidir?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölümlendirme tablosundaki değişikliklerin geçerli olması için makinanızı "
-"yeniden başlatmalısınız."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Biçemlendirilecek disk bölümlerini seçin"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Hatalı bloklar sınansın mı?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Bölümler biçemlendiriliyor"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s dosyası oluşturuluyor ve biçemlendiriliyor"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Kurulumu tamamlamak için yeterli takas alanı yok, lütfen ekleme yapın"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Mevcut paketler taranıyor"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Güncellenecek paketler bulunuyor"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sisteminizde kurulum ya da güncelleme için yeterli boş yer yok (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Tamamı (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Önerilen (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Lütfen disketteki paket seçimini yükle veya kaydete tıklayınız.\n"
-"Otomatik kurulum disketleriyle aynı biçemde oluşturulacaktır."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Disketten yükle"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Disketten yükleniyor"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Paket Seçimi"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Paket seçimlerini içeren diski sürücüye yerleştirin"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Diskete kaydet"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Seçilen boyut boş disk alanından daha büyük"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Kurulum türü"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Seçilmiş bir paket grubu yok\n"
-"Lütfen en az yer kaplayacak kurulumu seçerek oluşturun"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X olsun"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Temel belgeler olsun (önerilir!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Gerçekten en küçük kurulum (özellikle urpmi-siz)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Aşağıdaki listedeki tüm CD'lere sahipseniz TAMAM'a basın.\n"
-"CD'lerin hiçbirine sahip değiseniz VAZGEÇ'e basın.\n"
-"CD'lerden birkaçı eksikse onları seçili durumdan çıkarıp TAMAM'a basın."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" etiketli Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Kurulum hazırlanıyor"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketi kuruluyor\n"
-"%%%d"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Kurulum sonrası yapılandırma"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s sürücüsüne bir açılış disketi sürün"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s sürücüsüne güncelleme modülleri disketini sürün"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Şimdi şifreleme için kullanılacak yazılımı indirebilirsiniz.\n"
-"UYARI:\n"
-"\n"
-"Bu yazılıma uygulanabilir farklı genel gereksinimler nedeniyle ve çeşitli\n"
-"yargı haklarından dolayı, bu yazılımın son kullanıcısı, kanunların ona bu\n"
-"yazılımı internetten indirme ve saklama hakkını verdiğinden emin olmalıdır.\n"
-"\n"
-"Buna ek olarak, müşteri ve/veya son kullanıcı özellikle, bulunduğu yargı\n"
-"bölgesinin yasalarını çiğnemediğinden emin olmalıdır. Müşteri ve/veya son\n"
-"kullanıcı kanunların uyguladığı yasal koşullara saygı göstermediğinde ciddi\n"
-"yaptırımlara maruz kalacaktır.\n"
-"\n"
-"Özel ya da dolaylı zararlara (kar azalması, işin sekteye uğraması, ticari\n"
-"bilgi kaybı ve diğer maddi kayıplar) yol açan hiçbir olayda ne "
-"Mandrakesoft,\n"
-"ne de üreticileri ve/veya kaynak sağlayanları sorumlu tutulamaz. Bu "
-"yazılımı\n"
-"internetten indirirken son kullanıcı işbu sözleşmeyi kabul ettiğini \n"
-"beyan etmiş sayılır.\n"
-"\n"
-"\n"
-"Bu sözleşmeyle ilgili her türlü soru için lütfen\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA adresine yazınız."
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Şimdi dağıtımdan sonra çıkan güncelleme paketlerini indirebilirsiniz.\n"
-"\n"
-"Güvenlik açıklarını ve hataları gideren güncellemeleri indirebilmek\n"
-"için Internet bağlantınızın yapılandırılmış olması gerekmektedir.\n"
-"\n"
-"Güncellemeleri kurmak istiyor musunuz?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Yansı adreslerini almak için Mandrake Linux web sayfasına bağlantı kuruluyor"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri alacağınız bir yansı adresi seçiniz"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Güncelleme paketlerinin listesini almak için yansı adresine bağlantı "
-"kuruluyor"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "BulunduÄŸunuz zaman dilimi hangisi?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Donanım saati GMT'ye göre ayarlansın"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Otomatik saat ayarı (NTP kullanarak)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Zaman sunucusu"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Uzak CUPS sunucusu"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Yazıcı yok"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Bir ISA ses kartınız var mı?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Ses kartınızı yapılandırmak için kurulumdan sonra \"sndconfig\" aracını "
-"çalıştırın."
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Ses kartı bulunamadı. Kurulumdan sonra \"harddrake\" ile deneyin."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Özet"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Fare"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zaman Dilimi"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Yazıcı"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartı"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Ses Kartı"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartı"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Yerel Dosyalar"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root parolası"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Parola yok"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Bu parola çok basit (en az %d karakter boyunda olmalıydı)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Kimlik kanıtlama"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Kimlik kanıtlaması"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Temel dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Sunucusu"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Kimlik Kanıtlaması"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS alanı"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS sunucusu"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Özel bir açılış disketi, Linux sisteminizin normal bir sistem yükleyici\n"
-"olmaksızın açılmasını sağlar. Eğer sisteminize SILO kurmayacaksanız,\n"
-"ya da başka bir işletim sistemi SILO'yu silerse ya da SILO donanımınızla\n"
-"çalışmazsa bu disket size yardımcı olacaktır. Sonradan, Mandrake kurtarma\n"
-"disketi görüntüsü kullanılarak da bu disket oluşturulabilir.\n"
-"\n"
-"Açılış disketi oluşturmak istiyorsanız, lütfen sürücüye boş bir disket\n"
-"yerleştirip \"Tamam\"'a basın."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "İlk disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "İkinci disket sürücü"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Atla"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Özel bir açılış disketi, Linux sisteminizin normal bir sistem yükleyici\n"
-"olmaksızın açılmasını sağlar. Eğer sisteminize lilo (ya da grub)\n"
-"kurmayacaksanız, ya da başka bir işletim sistemi lilo'yu silerse veya\n"
-"lilo donanımınızla çalışmazsa bu disket size yardımcı olacaktır. Sonradan,\n"
-"Mandrake kurtarma disketi görüntüsü kullanılarak da bu disket "
-"oluÅŸturulabilir.\n"
-"Açılış disketi oluşturmak istiyor musunuz?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(UYARI! XFS'i kök dik bölümü için kullanıyorsunuz, büyük\n"
-"ihtimalle 1.44 MBlık bir açılış disketi oluşturamayacaksınız,\n"
-"çünkü XFS çok büyük sürücü gerektirir)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Disket sürücü yok"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Açılış disketinin oluşturulacağı disket sürücüsünü seçin"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "%s sürücüsüne bir disket yerleştirin"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Açılış disketi oluşturuluyor"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Önyükleyici hazırlanıyor"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Eski ya da bilinmeyen bir makinaya sahipmişsiniz gibi görünüyor.\n"
-"Yaboot önyükleyicisi düzgün çalışmayabilir.\n"
-"Kurulum devam edecek ama bu makinayı açmak için\n"
-"BootX kullanmak zorunda kalacaksınız."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot'u kullanmak istiyor musunuz?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot kurulumunda hata, \n"
-"ilk disk bölümünü yok etse bile yine de kurulmasını istiyor musunuz?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Önyükleyici Kuruluyor"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Önyükleyici kurulumu başarısız. Oluşan hata:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Önyükleyiciyi etkinleştirmek için Gömülü Sistem önyükleme aygıtınızı\n"
-"değiştirme gereği duyabilirsiniz. Yeniden başlatma sırasında önyükleyici\n"
-"komut satırını göremiyorsanız, sistemi yeniden başlatırken Command-Option-O-"
-"F\n"
-"seçtikten sonra:\n"
-"  setenv boot-device %s,\\\\:tbxi\n"
-"ve ardından:   shut-down \n"
-"girerseniz, sonraki açılışta önyükleyici komut satırını görmeniz gerekir."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sürücüsüne boş bir disket yerleştirin"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Otomatik kurulum disketi hazırlanıyor"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bazı adımlar tamamlanmadı.\n"
-"\n"
-"Gerçekten çıkmak istiyormusunuz?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Tebrikler, kurulum tamamlandı.\n"
-"Cdrom ve/veya disketi çıkarttıktan sonra Enter'a basarak bilgisayarınızı\n"
-"yeniden başlatın.\n"
-"\n"
-"Mandrake Linux'nin bu sürümündeki güncellemeler hakkında bilgi almak için\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"adresine bakabilirsiniz. Sisteminizin ayarları hakkında daha geniş\n"
-"bilgiyi Mandrake Linux Kullanıcı Kılavuzunda bulabilirsiniz."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Otomatik kurulum disketi oluÅŸtur"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Tam otomatik bir kurulum yapılabilir, ancak\n"
-"bu durumda sabit diskiniz tamamen ele geçirilebilir!!\n"
-"(Yani kurulum programı bütün diski kullanmaya kalkabilir).\n"
-"\n"
-"EtkileÅŸimli bir kurulumu da tercih edebilirsiniz.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Otomatik"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "EtkileÅŸimli"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Paket seçimlerini Kaydet"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Kurulum %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  gezinmek için <Tab>/<Alt-Tab>  |  <Boşluk> seçer  |  sonraki ekran <F12> "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu kayıp"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper kayıp"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Bir dosya seçin"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "GeliÅŸmiÅŸ"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Temel"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Lütfen bekleyin"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Bilgi"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ağacı Aç"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Ağacı Kapat"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Düz ve gruplu sırama arasında seçim"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Hatalı tercih, tekrar deneyin\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçiminiz? (%s öntanımlı) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Girdiler:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Seçiminiz? (%s öntanımlı, 0/1) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Düğme `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Bu düğmeye tıklamak ister misiniz?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Seçiminiz? (`%s'%s öntanımlı) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Oradan seçilecek bir kaç şey var (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Lütfen düzenlemek istediğiniz ilk onluğu seçiniz,\n"
-"ya da devam etmek için ENTER tuşuna basınız.\n"
-"Seçiminiz? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Uyarı, değişen etiket:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Yeniden gönder"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Çek dili (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Almanca"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak dili"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Ä°spanyolca"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fince"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Fransızca"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveççe"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polonezce"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusça"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "İsveççe"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Ä°ngiliz (UK) klavye"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Amerikan (US) klavye"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Arnavutça"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Ermenice (eski) "
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Ermenice (daktilo)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Ermenice (fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerice (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belçika dili"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarca (fonetik)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaristan"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brezilya dili (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusça"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "İsveççe (Alman klavyesi)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "İsveççe (Fransız klavyesi)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Çekçe (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Almanca (ölü tuşlar yok)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danimarkaca"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvoryak dili (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvoryak (Norveççe)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvoryak dili (İsveçce)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonya dili"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gürcüce (Rus klavyesi)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gürcü dili (Latin klavye)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Yunanca"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Macarca"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Krotyan"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Ä°branice"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Ä°branice (Fonetik)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Farsça"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Ä°zlandaca"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Ä°talyanca"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonca 106 tuÅŸ"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Kore klavyesi"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latin Amerika dili"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanya dili AZERTY (eski)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY (yeni)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"üst sıra\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latviya dili"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonya dili"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollanda dili"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Lehçe (QWERTY klavye)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Lehçe (QWERTZ klavye)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portekizce"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Fransızca (Kanada/Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romence (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romence (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusça (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovence"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakça (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakça (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Sırpça (kril)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai klavye"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tacik klavye"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkçe (geleneksel \"F\" klavye)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkçe (105 tuş \"Q\" klavye)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klavye (uluslararası)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamca \"numerik satır\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "AltGr tuÅŸu"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Ä°ki shift tuÅŸu birlikte"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Cntrl ve shift tuşları birlikte"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock tuÅŸu"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl ve Alt tuşları birlikte"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt ve Shift tuşları birlikte"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Menu\" tuÅŸu"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Sol \"Windows\" tuÅŸu"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "SaÄŸ \"Windows\" tuÅŸu"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Döngüsel bağlama %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Önce mantıksal bölümleri sil\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"2.2 çekirdekler için PCMCIA desteği yok. Lütfen bir 2.4 çekirdek kullanın."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Fare"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sıradan Tekerli PS2 Fare"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 tuÅŸlu"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Sıradan 2 Tuşlu Fare"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Genel"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Tekerli"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seri"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Sıradan 3 Tuşlu Fare"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (seri ya da eski C7 tipi)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus fare"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tuÅŸlu"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tuÅŸlu"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "hiçbiri"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Fare yok"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Lütfen farenizi deneyin"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Fareyi aktif hale getirmek için"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "FARENÄ°ZÄ°N TEKERÄ°NÄ° HAREKET ETTÄ°RÄ°N!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso10646-1,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Son"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sonraki ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Önceki"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "DoÄŸru mu?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Internet'e bağlantı"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Adsl ile bağlanmanın en sık başvurulan yolu pppoe'dir.\n"
-"Fakat bazı bağlantılar pptp'yi , diğer bir kaçı ise dhcp'yi kullanır.\n"
-"Emin değilseniz lütfen \"pppoe kullanılsın\"'ı seçin"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp kullanılsın"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe kullanılsın"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp kullanılsın"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hangi dhcp istemcisini kullanmak istiyorsunuz?\n"
-"Öntanımlı olan dhcpcd'dir"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Sisteminize bağlı bir ethernet kartı bulunamadı.\n"
-"Bu bağlantı türü ayarlanamayacak."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Ağ bağdaştırıcısını seçin"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Lütfen Internet'e bağlanmak için kullanacağınız ağ bağdaştırıcısını seçin"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ağ kartı bulunamadı"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Ağ Ayarları"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Eğer biliyorsanız lütfen makinanızın ismini girin.\n"
-"Bazı DHCP sunucuları çalışabilmek için sunucu ismi gerektirirler.\n"
-"Sunucu isminiz, sunucu adı kurallarına tam olarak uygun olmalıdır,\n"
-"Örneğin ``bilgisayarım.alanadı.com'' gibi."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Sunucu ismi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Ağ Yapılandırma Sihirbazı"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Dışsal ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "İçsel ISDN kartı"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN bağlantınız hangi türde?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hangi ISDN yapılandırmasını tercih edersiniz?\n"
-"\n"
-" * \"Eski\" yapılandırma isdn4net kullanır. Güçlü araçlar\n"
-"   içermesine rağmen yapılandırma zor olabilir ve standart değildir.\n"
-"\n"
-" * \"Yeni\" yapılandırmanın anlaşılması daha kolay, daha standart\n"
-"   ancak daha az araç içerir.\n"
-"\n"
-"Size hangisi kolay geliyorsa o yapılandırmayı seçmeniz önerilir.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Yeni yapılandırma (isdn-hafif)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Eski yapılandırma (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Yapılandırması"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Servis sağlayıcınızı seçin.\n"
-" Eğer listede yoksa, Listelenmemiş'i seçin."
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Avrupa Protokolü"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Avrupa protokolü (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Dünyanın diğer kısımları için protokol"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Dünyanın diğer kısımları için protokol \n"
-" D-Kanalı yok (kiralık hat)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Hangi protokolü kullanmak istiyorsunuz ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Ne tür bir kartınız var?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Bilmiyorum"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Bir ISA karta sahipseniz bir sonraki ekrandaki değerler doğru olacaktır.\n"
-"\n"
-"Bir PCMCIA karta sahipseniz, kartınızın irq ve io değerlerini bilmek "
-"sorundasınız.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Vazgeç"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Devam"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Hangisi sizin ISDN kartınız?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Bir PCI ISDN kartı buldum, fakat türünü bilmiyorum. Lütfen bir sonraki "
-"ekrandan bir PCI kart seçin."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "PCI ISDN kart bulunamadı. Lütfen bir sonraki ekrandan bir tane seçin."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hangi seri porta bağlı olduğunu seçiniz"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Çevirmeli ağ seçenekleri"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Bağlantı adı"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefon numarası"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "GiriÅŸ ID'si"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Betik tabanlı"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal tabanlı"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Alan adı"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "İlk DNS Sunucu (isteğe bağlı)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "İkinci DNS Sunucu(isteğe bağlı)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantıyı kesebilir ya da yeniden ayarlayabilirsiniz."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı yeniden ayarlayabilirsiniz."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Şu anda internete bağlısınız."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"İnternete bağlanabilir ya da bağlantınızı yeniden ayarlayabilirsiniz."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Şu anda internete bağlı değilsiniz."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "BaÄŸlan"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Bağlantıyı Kes"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Bağlantı yapılandırması"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "İnternet bağlantısı ve yapılandırması"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "%s bağlantısının yapılandırmasına başlanıyor."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"%s bağlantısının yapılandırmasına başlanıyor.\n"
-"\n"
-"\n"
-"Devam etmek için Tamam'a tıklayınız."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Ağ Yapılandırması"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Siz şu anda Ağ yapılandırması bölümündesiniz, fakat sizin zaten "
-"yapılandırılmış bir ağınız var.\n"
-"Eski yapılandırmanızın korumak için \"TAMAM\" a, yeniden Internet ve Ağ "
-"bağlantılarınızı yapılandırmak için \"İPTAL\" e basın.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Ağ Yapılandırma Sihirbazına Hoşgeldiniz!!!\n"
-"\n"
-"Bu sihirbaz internet/ağ yapılandırmanızda size yardımcı olmak içindir.\n"
-"Eğer otomatik tanımlama istemiyorsanız , onay kutusunu temizleyin.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Yapılandırma profilini seçin"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Otomatik algılama kullanılsın"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Aygıtlar taranıyor..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normal modem bağlantısı"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s portunda algılandı"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN bağlantısı"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s algılandı"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL Bağlantısı"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s bağdaştırıcısında algılandı"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablo Bağlantısı"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kablo Bağlantısı algılandı"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN bağlantısı"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "Eternet kart(lar)ı algılandı"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Yapılandırmak istediğiniz bağlantıyı seçin"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Bu yapılandırma ile Internet'e bir çok yoldan bağlanmanız mümkün.\n"
-"Kullanmak istediğiniz birini seçiniz.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet Bağlantısı"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Bağlantınızın açılışta başlatılmasını ister misiniz?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Ağ Yapılandırması"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Ağ yeniden başlatmayı gerektiriyor."
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ağınızı yeniden başlatırken bir hata oluştu : \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Tebrikler, ağ ve internet yapılandırmasını tamamladınız.\n"
-"\n"
-"Şimdi bu yapılandırma sisteminize uygulanacak.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Bittikten sonra, makina ismi değiştirme sorunlarından kaçınmak için\n"
-"X ortamından başlatmanız önerilir."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Yapılandırmada sorun çıktı.\n"
-"Bağlantınızı net_monitor ya da mcc üzerinden kontrol edin. Eğer bağlantınız "
-"çalışmıyorsa yapılandırmayı yeniden başlatabilirsiniz"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UYARI: Bu aygıt daha önce internet bağlantısı için yapılandırılmış.\n"
-"Basitçe 'Ayarları tut'u seçin ve eski ayarlarınızla devam edin.\n"
-"Bu yapılanmayı değiştirmemek istiyorsanız devam edin."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "Lütfen bu makina için gerekli IP değerlerini girin."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s ağ aygıtı ayarlanıyor"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s sürücüsü)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresi:"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "AÄŸ maskesi:"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Otomatik IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresi 1.2.3.4 biçimide olmalıdır"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Lütfen makinanızın ismini girin.\n"
-"Örneğin ``makinaismi.alanadı.com''.\n"
-"Eğer ağ geçiti kullanıyorsanız bunun da IP numarasını girmelisiniz."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS sunucusu"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Ağ geçidi (örn: %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Ağ geçiti aygıtı"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Vekil sunucu ayarları"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP vekil sunucu"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP vekil sunucu"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Track ağ kart id'si (laptoplar için kullanışlı)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Vekil sunucu http://... şeklinde olmalı."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Vekil sunucu ftp://... olmalı."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "İnternet ayarları"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "İnternet bağlantısını şimdi denemek ister misiniz?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Bağlantınız test ediliyor..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistem şu anda internete bağlı."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Güvenlik nedenleri ile bağlantınız kapatılacaktır."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sistem internete bağlı gibi görünmüyor.\n"
-"Bağlantıyı tekrar ayarlamayı deneyin."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Bağlantı Ayarları"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Lütfen aşağıdaki alanı doldurun ya da kontrol edin."
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kartın IRQ değeri"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kartın DMA değeri"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kartın IO değeri"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kartın IO_0 değeri"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kartın IO_1 değeri"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Kişisel telefon numaranız"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Servis sağlayıcı adı"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Servis sağlayıcının telefon numarası"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1. Alan adı sunucusu"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2. Alan adı sunucusu"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Ülkenizi seçin"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Çevirme kipi"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Bağlantı hızı"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Bağlantı zaman aşımı (saniyede)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kullanıcı Adı"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Parola"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "bağlama başarısız: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Mantıksal bölüm bu platform tarafından desteklenmiyor"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Bölümlendirme tablonuzda bir boşluk var ama kullanılamaz durumda.\n"
-"Bu boşluğu, birinci bölümünüzü en yakınındaki mantıksal bölüme taşıyarak\n"
-"sorunu çözebilirsiniz."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s dosyasından kurtarılmasında hata: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Hatalı yedekleme dosyası"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s dosyasına yazarken hata oluştu"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Diskinizde bir şeyler kötü gidiyor.\n"
-"Veri bütünlüğünün denetlenmesi başarısız oldu.\n"
-"Bu durumda bu diske yazılan her şey çöpe gitmiş olacak."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "zorunlu"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "önemli"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "çok hoş"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "güzel"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "belki"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Genel Unix Yazdırma Sistemi"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Yeni OluÅŸum"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Satır yazdırma Daemonu"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Kuyruğa değil doğrudan yazıcıya gönder"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Yerel Yazıcı"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Uzaktaki Yazıcı"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Uzak CUPS sunucusundaki yazıcı"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Uzak lpd sunucusundaki yazıcı"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Ağ Yazıcısı (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT sunucusundaki yazıcı"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "NetWare Sunucusundaki yazıcı"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Yazıcı adresini girin"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Bir komuttaki baÄŸlama iÅŸi"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Bilinmeyen Model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Yerel Yazıcılar"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Uzak Yazıcılar"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " paralel port \\/*%s üstündeki"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB yazıcı \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", paralel port \\/*%s üzerindeki çok işlevli aygıt"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", USB porta bağlı çok işlevli aygıt"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", HP JetDirect üstündeki çok işlevli aygıt"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", çok işlevli aygıt"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", %s e yazdırılıyor"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "LPD sunucusu \"%s\" üzerindeki yazıcı \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP makina \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "Windows sunucusu \"%s\" üzerindeki \"%s\" paylaşımı"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "Novell sunucusu \"%s\" üzerindeki yazıcı \"%s\" "
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", %s komutu kullanılarak"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Temel yazıcı (sürücüsüz)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s de)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(bu makinada)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS sunucusu \"%s\" üzerindeki"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Öntanımlı)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Yazıcı Bağlantısı Seçimi"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Yazıcınız ne şekilde bağlı?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Uzak bir CUPS sunucusundaki yazıcıları burada yapılandırmanız\n"
-"gerekmemekte; bu yazıcılar otomatik olarak bulunacaktır."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS yapılandırması"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "CUPS sunucusunu belirtin"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Yerle ağınızdaki CUPS sunucularındaki yazıcılara erişmek için hiçbir şeyi "
-"yapılandırmak zorunda değilsiniz; CUPS sunucuları yazıcıları hakkında "
-"makinanıza bilgi verecektir. Makinanızdaki bilinen tüm yazıcılar "
-"Printerdrake'in ana penceresindeki \"Uzak Yazıcılar\" bölümünde "
-"listelenmiştir. CUPS suncusu yerel ağınızda değilse IP adresini ve isteğe "
-"bağlı olarak port numarasını vererek sunucudaki yazıcılar hakkında bilgi "
-"alabilirsiniz. O da yoksa bu alanları boş bırakın."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalde, CUPS ağ ortamınıza bağlı olarak otomatikman yapılandırılır. "
-"Böylece, yerel ağınızda ki CUPS sunucularına erişebilirsiniz. Bu işlem doğru "
-"sonuçlanmazsa \"Otomatik CUPS yapılandırması\"nı kapatır ve /etc/cups/cupsd."
-"conf dosyasını kendiniz düzenleyebilirsiniz. İşlem tamamlandıktan sonra "
-"\"service cups restart\" komutu ile CUPS'u başlatmayı unutmayınız."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresi 192.168.1.20 gibi olmalıdır"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Port numarası bir tamsayı olmalıdır."
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS sunucu IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Kapı"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Otomatik CUPS yapılandırması"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Aygıtlar taranıyor ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Portları test et"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Yeni Yazıcı Ekle"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Yazıcı Ayarları Sihirbazına Hoş Geldiniz\n"
-"\n"
-"Bu sihirbaz ile hem makinanızdaki hem de bağlı olduğunuz ağdaki yazıcıları "
-"hem kendinizin hem de ağdaki diğer makinaların kullanımına "
-"hazırlayabilirsiniz.\n"
-"\n"
-"Sihirbaz, yazıcı ayarları için gereken tüm bilgileri size soracak ve tüm "
-"yazıcılar ile sürücülerinin sçeneklerine ve yazıcı bağlantı türlerine "
-"erişiminizi sağlayacaktır."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Yerel Yazıcı"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Yazıcı Ayarları Sihirbazına Hoş Geldiniz\n"
-"\n"
-"Bu sihirbaz bu makinaya bağlı tüm yazıcıları kurmanızda size yardımcı "
-"olacaktır.\n"
-"\n"
-"Lütfen yazıcılarınızı makinanıza bağlayın ve yazmaya hazır hale getirin. "
-"Hazır olduğunuzda \"İleri\" düğmesine tıklayın. Yazıcı ayarlarınızı şimdi "
-"yapmak istemiyorsanız \"İptal\" düğmesine tıklayabilirsiniz.\n"
-"\n"
-"Bilgi:\n"
-" Bazı sistemler yazıcıların otomatik algılanması sırasında donabilir. "
-"Otomatik algılama olmaksızın yazıcı kurulumu yapmak isterseniz \"Yazıcıları "
-"otomatik algıla\" seçeneğini iptal edebilirsiniz. Eğer printerdrake uzak "
-"yazıcılarınızı otomatik olarak listelemezse, printerdrake'in \"Uzman Kipi"
-"\"ni kullanınız."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Yazıcıları otomatik algıla"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Tebrikler, yazıcınız kuruldu ve yapılandırıldı!\n"
-"\n"
-"Artık uygulamaların \"Yazdır\" komutunu kullanabilirsiniz.\n"
-"\n"
-"Bir yazıcıyı eklemek, kaldırmak, yazıcı ismini değiştirmek veya öntanımlı "
-"ayarları (kağıt besleme düzeni, yazdırma kalitesi, v.s.) değiştirmek "
-"isterseniz Mandrake Kontrol Merkezinden \"Donanım\" bölümündeki \"Yazıcı\" "
-"sekmesini seçiniz."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Yazıcıların Algılanması"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"PrinterDrake makinanızın paralel ve USB portlarına bağlı yazıcıları otomatik "
-"olarak bulabilir. Fakat bu işlem sırasında bazı sistemler DONABİLMEKTE ve "
-"bazan bu dosya sisteminin ÇÖKMESİ ve HATTA BOZULMASI İLE SONUÇLANMAKTADIR. "
-"Onu kullanıp kullanmamak tamamen sizin sorumluluğunuz olacaktır.\n"
-"\n"
-"Yazıcıların otomatik olarak algılanmasını YİNE DE istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Otomatik algılama yap"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Elle ayar yapılsın"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s algılandı"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Paralel port \\/*%s üzerindeki yazıcı"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB yazıcı \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Makinanıza bağlı bir yazıcı bulunamadı! Yazıcınızı kendiniz kurmak "
-"isterseniz girdi alanına bir aygıt ismi/dosya ismi yazın. (1. Paralel port "
-"veya LPT1: karşılığı olarak /dev/lp0, LPT2: karşılığı olarak /dev/lp1,..., "
-"1. USB yazıcı için /dev/usb/lp0, 2. USB yazıcı için /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Bir aygıt veya dosya ismi girmelisiniz!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Makinanıza bağlı yazıcı bulunamadı!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Ağ yazıcıları kurulum tamalandıktan sonra tanıtılabilir. Bunu Mandrake "
-"Kontrol Merkezinden \"Donanım\" bölümündeki \"Yazıcı\" sekmesini seçerek "
-"yapabilirsiniz."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Ağ yazıcılarını kurmak için \"İptal\" düğmesine tıkladıktan sonra \"Uzman "
-"Kipi\"ne ve ardından \"Yeni Yazıcı Ekle\"ye tıklayınız."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Aşağıdaki yazıcı otomatik algılandı, bu yazıcı yapılandırmak istediğiniz "
-"yazıcılardan biri değise, girdi alanına bu yazıcının bulunduğu /aygıt/dosya "
-"ismini yazınız."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Otomatik algılanan yazıcıların bir listesi aşağıda verilmiştir. Girdi "
-"alanına ayarlarını yapmak istediğiniz yazıcının /aygıt/dosya ismini yazınız."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Aşağıdaki yazıcı otomatik olarak algılandı. Yazıcı yapılandırması otomatik "
-"olarak yapılacak. Eğer yazıcınız doğru algılanmamışsa ya da yapılandırmayı "
-"kendiniz yapmak isterseniz, \"Elle yapılandır\" seçeneğini etkinleştiriniz."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Algılanan yazıcıların listesi aşağıdadır. Ayarlarının yapılmasını "
-"istediğiniz yazıcıyı seçiniz. Yapılandırma tamamen otomatik olarak "
-"gerçekleştirilecektir. Eğer yazıcı doğru algılanmamışsa ya da yazıcı "
-"ayarlarını kendiniz yapmak istiyorsanız, \"Elle yapılandır\" seçeneğini "
-"etkinleÅŸtiriniz."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Lütfen yazıcınızın bağlı olduğu portu seçiniz ya da aygıt/dosya ismi vererek "
-"belirtiniz."
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Lütfen yazıcınızın bağlı olduğu portu seçiniz."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (1. Paralel port veya LPT1: karşılığı olarak /dev/lp0, LPT2: karşılığı "
-"olarak /dev/lp1,..., 1. USB yazıcı için /dev/usb/lp0, 2. USB yazıcı için /"
-"dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Bir yazıcı ya da aygıt seçmeli ya da vermelisiniz!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Elle yapılandır"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Yazıcınız HP'nin çok işlevli aygıtlarından biri mi? (Tarayıcılı bir "
-"OfficeJet, PSC, PhotoSmart, LaserJet 1100/1200/1220/3200/3300 gibi)"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "HPOJ paketi kuruluyor..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Aygıt denetleniyor ve HPOJ yapılandırılıyor ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "SANE paketi kuruluyor..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Çok işlevli HP aygıtınız üzerinde taranıyor"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "CUPS için yazıcı portu etkinleştiriliyor ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Yazıcı veri tabanı okunuyor ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Uzak Yazıcı (lpd) Seçenekleri"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Uzaktaki bir lpd yazıcıyı kullanmak için, yazıcının bağlı olduğu makinanın "
-"adını ve yazıcı ismini vermeniz gerekmektedir."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Uzak makina adı"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Uzak yazıcı adı"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Uzak makina adı yok!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Uzak yazıcı ismi yok!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Yazıcı Seçenekleri"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Bir SMB yazıcıdan çıktı almak için, SMB makina adı (Dikkat! TCP/IP makina "
-"isminden farklı bir isimde olabilir), yazıcı sunucunun IP adresi, varsa "
-"yazıcının paylaşım adı, çalışma grubu, kullanıcı adı ve parolası "
-"verilmelidir."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB sunucu adı"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB sunucu IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Paylaşım adı"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Çalışma grubu"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ya sunucu ismi ya da sunucunun IP adresi verilmelidir!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba paylaşım ismi yok!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Yazıcı Ayarları"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Bir NetWare yazıcıdan çıktı alacaksanız, NetWare yazdırma sunucunun ismi "
-"(TCP/IP makina isminden farklı bir isme sahip olabilir), varsa "
-"kullanacağınız yazdırma kuyruğunun ismi, kullanıcı adı ve parolası "
-"verilmelidir."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Yazdırma Sunucusu"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Yazıcı Kuyruk Adı"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP sunucusu ismi yok!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP kuyruÄŸu ismi yok!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Soket Yazıcısı Seçenekleri"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Bir TCP ya da soket yazıcısından çıktı alacaksanız, yazıcının bağlı olduğu "
-"makina adını ve seçimlik olarak port numarasını vermeniz gereklidir. HP "
-"JetDirect sunucularda port numarası genelde 9100 dür, diğer sunucularda "
-"farklı olabileceğinden donanımın kılavuzuna bakmanız önerilir."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Yazıcının makina ismi"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Yazıcının makina ismi yok!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Yazıcı Aygıtı URI'si"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Yazıcıya erişmek için doğrudan URI belirtebilirsiniz. URI, ya CUPS ya da\n"
-"Foomatic özelliklerini içermelidir.\n"
-"Bilgi: Her URI türünü her yazıcı havuzu desteklemez."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Geçerli bir URI girilmelidir!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Her yazıcının bir ismi olmalıdır (örneğin: \"yazıcı\"). Açıklama ve Yeri "
-"alanlarını doldurmak gerekmez. Onlar kullanıcılara bilgi vermek içindir."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Yazıcının ismi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Tanım"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Konum"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Yazıcı veritabanı hazırlanıyor ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Yazıcınızın modeli"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake, otomatik yazıcı algılaması ile bulduğu özelliklere uyan "
-"yazıcıyı veritabanındaki yazıcılardan bu özelliklerine en çok uyum sağlayanı "
-"seçti. Yazıcınız bu veritabanında bulunmuyorsa bu seçim yanlış olabilir. "
-"Seçimin doğru olup olmadığını kontrol ettikten sonra seçim doğruysa, \"Model "
-"doğru\" değilse \"Medeli elle seç\"e tıklayınız. Elle seçmeyi tıkladığınızda "
-"sonraki ekrandaki listeden yazıcınızı seçebilirsiniz.\n"
-"\n"
-"Printerdrake tarafından bulunan yazıcı:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Model doÄŸru"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Modeli elle giriniz"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Yazıcı model seçimi"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "hangi model bir yazıcınız var?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Lütfen Printerdrake'in doğru yazıcıyı bulup bulmadığını kontrol edin. Yanlış "
-"model bulunmuşsa ya da \"Temel Yazıcı\" gösteriliyorsa, listeyi tarayarak "
-"doÄŸru modeli bulun."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Yazıcınız listede yoksa, uyumlu birini ya da bir benzerini seçebilirsiniz "
-"(yazıcınızın kılavuzuna bakınız)."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter yapılandırması"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Bir OKI laser winprinter yapılandıracaksanız bazı koşulları sağlamalısınız. "
-"Bu yazıcılar çok özel haberleşme protokolleri kullanırlar ve sadece ilk "
-"paralel porta bağlı olarak çalışırlar. Yazıcınız diğer paralel porta ya da "
-"bir ağ yazdırma sunucusuna bağlıysa önce onu makinanın birinci paralel "
-"portuna bağlamalısınız. Aksi takdirde, yazıcı çalışmayacak, bağlantı türü "
-"ayarlarınız sürücü tarafından yoksayılacaktır."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet yapılandırması"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark tarafından sağlanan mürekkep püskürtmeli yazıcı sürücüleri sadece "
-"yerel yazıcıları destekler. Yazıcınızı yapılandırmak için lütfen doğrudan "
-"makinanıza bağlayınız."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Lexmark inkjet ile yazdırmak ve bu kurulumda kullanmak için mürekkep "
-"püskürtmeli yazıcı sürücüsüne ihitiyacınız var. Bu sürücüyü http://www."
-"lexmark.com/ adresinde rpm paketi olarak bulabilirsiniz. Bu adrese "
-"gittiğinizde \"Drivers\" bağını kullanarak erişeceğiniz sayfadan yazıcınızı "
-"bulduktan sonra işletim sistemini \"Linux\" seçiniz. Gelen rpm paketi "
-"kurulum için bir etkileşimli grafik arayüz sağlasa da bu kurulum sırasında "
-"bu grafik arayüz kullanılmayacağından lisans kabulünün hemen ardından "
-"sürücünün kurulumunu durdurmalısınız. \"lexmarkmaintain\" ile kafa ayar "
-"sayfasını yazdırdıktan sonra bu uygulama ile kafa ayarlarını yapın."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Yazıcı öntanımlı ayarları\n"
-"\n"
-"Sayfa boyutu (ve varsa) mürekkep türünün ve ayrıca lazer yazıcının donanım "
-"yapılandırmasınını (bellek, kağıt beslemesi, çift yönlü çalışma,vs) doğru "
-"verildiğinden emin olmalısınız. Bilgi: Yazıcının yazdırma kalitesi "
-"yükseldikçe yazdırma hızı düşecektir."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s seçeneği bir tamsayı olmalıdır!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s seçeneği bir sayı olmalıdır!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s seçeneği kapsamdışı!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Bu yazıcıyı (\"%s\")\n"
-"öntanımlı yazıcı yapmak istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Deneme sayfası"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Lütfen yazdırmak istediğiniz deneme sayfalarını seçiniz.\n"
-"Bilgi: Fotoğraflı deneme sayfasının yazdırılması uzun zaman alabilir ve "
-"belleği yetersiz bir laser yazıcı ile çıktı alınamayabilir. Kurulum "
-"sırasında standart bir deneme sayfası çıktısı almak yeterlidir."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Deneme sayfasız"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Yazdır"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standart deneme sayfası"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternatif deneme sayfası(mektup)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternatif dememe sayfası (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Resim deneme sayfası"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Deneme sayfalarını yazdırMa"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Deneme sayfası basılıyor..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Deneme sayfası yazıcıya gönderildi.\n"
-"Yazıcının çalışması için bir az bir zaman geçebilir.\n"
-"Yazdırma durumu:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Deneme sayfası yazıcıya gönderildi.\n"
-"Yazdırmanın başlaması biraz zaman alabilir.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Düzgün olarak çalışıyor mu?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Temel yazıcı"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Bir dosyayı komut satırından doğrudan yazdırmak isterseniz \"%s<dosya>\" "
-"komutunu ya da bir grafik arayüzlü yazdırma aracı kullanmak\n"
-"isterseniz \"xpp <dosya>\" veya \"kprinter <dosya>\" komutlarını\n"
-"kullanabilirsiniz\n"
-"dosyayı uygulama sağlayacağından dosya ismi verilmez.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ayrıca bir çok uygulamanın yazdırma diyaloglarının \"Yazdırma komutu\" "
-"alanında\n"
-"bu komutlardan birini kullanabilirsiniz. Ancak bu tür kullanımda "
-"yazdırılacak\n"
-"dosyayı uygulama sağlayacağından dosya ismi verilmez.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\" komutu ile ayrıca herhangi bir yazdırma işleminin\n"
-"ayarlarını da değiştirebilirsiniz. Bu ayarları komut satırından\n"
-"girebilirsiniz.\n"
-"\n"
-"Kullanımı: \"%s <dosya>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Şimdiki yazıcınız için mümkün seçeneklerin bir listesini aşağıdan "
-"okuyabileceğiniz gibi \"Seçenek listesini yazdır\" düğmesine tıklayarak da "
-"alabilirsiniz.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Yazıcınız için mümkün yazdırma seçeneklerinin listesi:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Bir dosyayı komut satırından doğrudan yazdırmak isterseniz \"%s <dosya>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ayrıca bir çok uygulamanın yazdırma diyaloglarının \"Yazdırma komutu\" "
-"alanında\n"
-"bu komutu kullanabilirsiniz. Ancak bu tür kullanımda yazdırılacak\n"
-"dosyayı uygulama sağlayacağından dosya ismi verilmez.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Yazıcınız için mümkün seçeneklerin bir listesini \"Seçenek listesini yazdır"
-"\" düğmesine tıklayarak alabilirsiniz."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Bir dosyayı komut satırından doğrudan yazdırmak isterseniz \"%s <dosya>\" ya "
-"da \"%s <dosya>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Bir grafik arayüz\n"
-"tercih ediyorsanız \"xpdq\" kullanarak yazdırılacakları ve seçenekleri\n"
-"belirleyebilirsiniz.\n"
-"Masaüstü yöneticisi olarak KDE kullanıyorsanız, yazıcının kağıt yemesi "
-"halinde\n"
-"masaüstünüzde bulunan \"Yazıcıyı DURDUR!\" düğmesini kullanabilirsiniz.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" ve \"%s\" komutları ile ayrıca herhangi bir yazdırma işleminin\n"
-"ayarlarını da değiştirebilirsiniz. Bu ayarları komut satırından\n"
-"girebilirsiniz.\n"
-"\n"
-"Kullanımı: \"%s <dosya>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Kapat"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "\"%s\" ile yazdırılıyor/taranıyor"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "\"%s\" Yazıcısından yazdırılıyor"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Seçenekleri listesini yazdır"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Çok işlevli HP aygıtınız tarama işlevi etkin olacak şekilde otomatikman "
-"yapılandırıldı. Konsoldan \"scanimage\" ile (birden fazla tarama aygıtınız "
-"varsa \"scanimage -d hp:%s\" ile belirterek), X üzerinden \"xscanimage\" ya "
-"da \"xsane\" ile tarama yaptırabilirsiniz. GIMP kullanıyorsanız, \"Dosya\"/"
-"\"Tara\" menüsünden ilgili yeri seçerek de kullanabilirsiniz. Daha fazla "
-"bilgi edinmek için konsoldan \"man scanimage\" ve \"man sane-hp\" "
-"komutlarını verebilirsiniz.\n"
-"\n"
-"Bu aygıt için \"scannerdrake\" kullanmayın!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Çok işlevli HP aygıtınız tarama işlevi etkin olacak şekilde otomatikman "
-"yapılandırıldı. Konsoldan \"ptal-hp %s scan ...\" komutu ile tarama işlemini "
-"başlatabilirsiniz. X ya da GIMP üzerinden tarama bu aygıt için mümkün "
-"deÄŸildir. Daha fazla bilgiyi sisteminizdeki \"/usr/share/doc/hpoj-0.8/ptal-"
-"hp-scan.html\" dosyasından edinebilirsiniz. HP LaserJet 1100 ya da 1200 "
-"kullanıyorsanız, sadece tarayıcı seçeneği varsa tarama yaptırabilirsiniz.\n"
-"\n"
-"Bu aygıt için \"scannerdrake\" kullanmayın!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Yazıcı verisi okunuyor ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "yazıcı yapılandırmasını aktar"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Yazdırma hazuzunuzu %s yerine %s yapmak için yazıcı yapılandırmanızı "
-"kopyalayabilirsiniz. Tüm yapılandırma bilgileri (yazıcı ismi, açıklaması, "
-"yeri, bağlantı türü ve öntanımlı seçenekler) kopyalanırken, bekleyen işler "
-"aktarılmayacaktır.\n"
-"Bilgi: Aşağıdaki sebeplerden dolayı tüm kuyruklar da aktarılabilir:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"Novell sunucuları üzerindeki yazıcılara ve Novell yazıcılarına bir komutla "
-"veri gönderilmesini CUPS desteklemez.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ sadece yerel yazıcıları, LPD yazıcılarını ve Soket/TCP yazıcılarını "
-"destekler.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ve LPRng, IPP yazıcıları desteklemez.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Ek olarak, kuyruklar bu programla oluşturulmaz ya da \"foomatic-yapılandırma"
-"\" aktarılamaz."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ayrıca CUPS sürücüleri ya da üreticileri tarafından sağlanan PPD dosyaları "
-"ile yapılandırılan yazıcılar aktarılamaz."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Aktarmak istediğiniz yazıcıları işaretledikten sonra\n"
-"\"Aktar\" düğmesine tıklayınız."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Yazıcılar aktarılmasın"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Aktar"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" isimli yazıcı zaten %s altında var.\n"
-"\"Aktar\" düğmesiyle üzerine yazabilirsiniz.\n"
-"Ayrıca yeni bir isim girebilir ya da\n"
-"bu yazıcıyı atlayabilirsiniz."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Yazıcı ismi sadece harfler, rakamlar ve alt çizgi içerebilir."
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" yazıcısı zaten var.\n"
-"Onun yapılandırmasının üzerine yazılmasını\n"
-"gerçekten istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Yeni Yazıcı adı"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s Transfer ediliyor ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Öntanımlı yazıcınızı da (\"%s\") aktardınız. Yeni yazdırma sistemi %s "
-"altında da öntanımlı yazıcı olsun mu?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Yazıcı verisi tazeleniyor ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Ağ yazıcısı yapılandırması"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Ağ başlatılıyor ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Ağ şimdi yapılandırılsın"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Ağ işlevselliği yapılandırılmamış"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Bir ağ yazıcısı yapılandırmak için ağ erişimine ihtiyacınız var, ancak "
-"ağınız henüz yapılandırılmamış. Bir ağ yapılandırması olmaksızın şimdi "
-"yapılandırılacak yazıcıyı kullanamayacaksınız. Ne yapmak istersiniz?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Ağ yapılandırılmadan devam edilsin"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Kurulum sırasında yapılan ağ yapılandırması şimdi başlatılamaz. Daha sonra, "
-"sisteminizi başlattığınızda, ağ erişiminizi sağladıktan sonra Mandrake "
-"Kontrol Merkezi'nde \"Ağ ve Internet\"/\"Bağlantı\" bölümünden ya da "
-"\"Donanım\"/\"Yazıcı\" bölümünden ağ yazıcınızı yapılandırabilirsiniz."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Ağ erişiminiz yok ve başlatılamadı. Lütfen yapılandırmanızı ve "
-"donanımınızıkontrol ettikten sonra ağ yazıcınızı yapılandırmayı tekrar "
-"deneyin."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Yazdırma sistemi başlatılıyor ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "yüksek"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoyak"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "%s güvenlik seviyesinde yazdırma sistemi kurulumu"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"%s yazdırma sistemini %s güvenlik seviyesinde çalıştıracak bir kuruluma "
-"başlamak üzeresiniz.\n"
-"\n"
-"Bu yazdırma sistemi, yazdırma işlerini beklerken ve yazdırırken bir artalan "
-"süreci olarak çalışır. Bu sürece ağ üzerindeki diğer makinalar tarafından da "
-"erişilebilir ve saldırılara açıktır. Diğer yandan, sadece bir kaç benzer "
-"uygulama bu güvenlik seviyesinde öntanımlı olarak başlatılabilir.\n"
-"\n"
-"Bu makinada yazdırmanın yapılandırılmasını gerçekten istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Açılış sırasında yazdırma sisteminin başlatılması"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Yazdırma sistemi (%s) makinanın açılışı sırasında otomatik olarak "
-"başlatılmayacaktır.\n"
-"\n"
-"Yazdırma sistemi potansiyel saldırı noktası olduğundan, ve daha yüksek bir "
-"güvenlik seviyesi gerektirdiğinden otomatik başlatmayı kapatmak daha uygun "
-"olacaktır.\n"
-"\n"
-"Yazdırma sisteminin otomatik başlatılmasını yine de istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Kurulu yazılım denetleniyor..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng Kaldırılıyor..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD Kaldırılıyor..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Yazıcı makarasını seçin"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hangi yazdırma sistemini (makara) kullanmak istiyorsunuz?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "\"%s\" yazıcısını yapılandır ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Foomatic kuruluyor ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Yazıcı seçenekleri"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake hazırlanıyor ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Uygulamalar yapılandırılıyor..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Yazdırmayı ayarlamak istiyor musunuz?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistem yazıdırılıyor: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aşağıdaki yazıcılar yapılandırıldı. Öntanımlı yazıcı yapmak, ayarlarını "
-"değiştirmek, hakkında bilgi almak ya da Star Office/OpenOffice.org için "
-"kullanılmak üzere bir uzak CUPS sunucusunun yazıcısı yapmak isterseniz "
-"üzerine çift tıklayın."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aşağıdaki yazıcılar yapılandırıldı. Bir yazıcı hakkında bilgi almak ya da "
-"üzerinde değişiklik yapmak için ona tıklayınız."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Yazıcı listesini tazele (Uzak CUPS yazıcıları da göstermek için)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Yazdırma sistemini değiştir"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normal Kip"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Başka yazıcı yapılandıracak mısınız?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Yazıcı Yapılandırmasını düzenle"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Yazıcı %s\n"
-"Bu yazıcıda neyi değiştireceksiniz?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "YAP!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Yazıcı bağlantısı türü"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Yazıcı ismi, açıklama, yeri"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Yazıcı üreticisi, modeli, sürücüsü"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Yazıcı üreticisi, modeli"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Bu yazıcıyı öntanımlı yazıcı olarak belirle"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Bu yazıcıyı Star Office/OpenOffice.org'e ekle"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Bu yazıcıyı Star Office/OpenOffice.org'den kaldır"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Deneme sayfalarını yazdır"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Bu yazıcının nasıl kullanıldığını bilmek için"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Yazıcı Kaldır"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Eski '%s' yazıcısı kaldırılıyor ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Öntanımlı yazıcı"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "\"%s\" yazıcısı öntanımlı yazıcı olarak belirlendi"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Yazıcı Star Office/OpenOffice.org'e ekleniyor"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Yazıcı \"%s\" Star Office/OpenOffice.org'e başarıyla eklendi."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Yazıcı \"%s\" Star Office/OpenOffice.org'e eklenemedi."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Yazıcı Star Office/OpenOffice.org'den kaldırılıyor"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Yazıcı \"%s\" Star Office/OpenOffice.org'den başarıyla kaldırıldı."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Yazıcı \"%s\" Star Office/OpenOffice.org'den kaldırılamadı."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "'%s' Yazıcısını kaldırmak istediğinize emin misiniz ?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "'%s' yazıcısı kaldırılıyor ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Vekil ayarları"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Vekil yapılandırma aracına hoş geldiniz.\n"
-"\n"
-"Burada, http ve ftp vekillerini kullanıcı ismi ve parolası\n"
-"olsun/olmasın yapılandırabilirsiniz\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Lütfen http vekili bilgilerini giriniz.\n"
-"Bir http vekili kullanmayacaksanız boş bırakınız."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Kapı"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url başlangıcı 'http:' şeklinde olmalıdır"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Kapı numarası rakamsal olmalıdır."
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Ftp vekil sunucu bilgisini doldurunuz\n"
-"Eğer vekil sunucu kullanmak istemiyorsanız boş bırakınız."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url başlangıcı 'ftp:' şeklinde olmalıdır"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Lütfen vekil sunucu kullanıcıadı ve parolasını giriniz,\n"
-"Eğer kullanıcıadı ve parola girmek istemiyorsanız boş bırakın"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Kullanıcı"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Parola"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Parolayı tekrar biçimle"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Parolalar uyuÅŸmuyor. Tekrar deneyin!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Biçemlendirilmiş RAID md%d'ye disk bölümü eklenemedi"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s dosyasına yazılamadı"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid başarısız"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid başarısız (raidtools eksik olabilir mi?"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d. seviye RAID için yetersiz sayıda disk bölümü\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (Gelişmiş Linux Ses Mimarisi) ses sistemi başlatılıyor"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, periyodik komut zamanlayıcısı"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd pil durumunu izlemek için ve syslog aracılığıyla bunun kaydını tutmak "
-"için kullanılır.\n"
-"Ayrıca pil azaldığında sistemi kapatmak için de kullanılır."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at komutu, zamanlanan komutları çalışmaları gereken zamanlarda çalıştırır.\n"
-"Sistem yükü yeterince düşük olduğunda yığın komutları çalıştırır."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, kullanıcılara özel komutları peritodik zamanlamalarla çalıştırabilen\n"
-"standart bir UNIX programıdır. vixie cron, standart cron'a eklenmiş birçok\n"
-"yeni özellik içerir."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander gibi metin tabanlı uygulamalara fare desteği ekler.\n"
-"Ayrıca konsolda fareyle kesme ve yapıştırma işlemlerine izin verir.\n"
-"Konsolda pop-up menü desteği sağlar."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake donanım analizini ve yapılandırma seçeneklerini başlatır\n"
-"donanım yenileme/değiştirme."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache bir World Wide Web sunucusudur. HTML dosyaları ve CGI sunumu için "
-"kullanılır."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (çoğunlukla inetd olarak adlandırılır) birçok \n"
-"başka internet servisini gerektiğinde çalıştırır. İçinde telnet, ftp, rsh ve "
-"rlogin gibi pekçok programın bulunduğu servisleri çalıştırmakla yükümlüdür.\n"
-"inetd'yi sistemden çıkarmak, onun çalıştırmakla yükümlü olduğu bütün "
-"servisleri \n"
-"kaldırmak anlamına gelir."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Bilgisayarınızı diğer ağlardan koruma amacıyla ateş duvarı kurma uygulaması "
-"için\n"
-"Linux kernel 2.2 serisi için hazırlanmış paket filitrelemesini başlatır."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'daki seçili klavye düzenini yükler.\n"
-"Hangi klavye düzeninin kullanılıcağı kbdconfig ile ayarlanabilir.\n"
-"Bu, mandrake kurulan birçok makinede etkin olarak bırakılmalıdır."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h için\n"
-"/boot içinde çekirdek başlığının otomatik yeniden üretimi"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Açılışta donanım algılaması ve yapılandırması."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ile, sistem açılışı sırasında çeşitli işlemlerin uygulanışını\n"
-"sistem yapılandırması bağlamında düzenlenebilir."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd, lpr'nin düzgün olarak çalışması için gerekli yazıcı daemonudur.\n"
-"lpd temel olarak, yazdırma görevlerini yöneten ve onları yazıcıya gönderen "
-"sunucudur."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Sanal Sunucu, yüksek performans ve yüksek\n"
-"erişilebilirlik kullanımını sağlar."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) sunucu isimlerini IP adreslerine dönüştüren Alan Adı "
-"Sunucusudur (DNS)."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Bütün Ağ Dosya Sistemlerini (NFS), SMB (Lan Manager/Windows), ve \n"
-"NCP (NetWare) bağlama noktalarını bağlar ve ayırır."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Açılış sırasında başlamak için ayarlanmış bütün ağ arayüzlerini aktive eder/"
-"kapatır."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP ağlarda dosya paylaşımı için kullanılan popüler bir protokoldür.\n"
-"Bu servis, /etc/exports dosyasında ayarları bulunan NFS sunucusunun \n"
-"kullanımını sağlar."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS TCP/IP ağlarda dosya paylaşımı için kullanılan popüler bir \n"
-"protokoldür. Bu servis NFS dosya kilidi kullanımını sağlar."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Başlangıçta Xwindows ve konsol altında tuş kilidini\n"
-"her başlangıçta açar."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w ve windows uyumlu yazıcıları destekler."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA desteği, laptoplarda ethernet ve modem gibi aygıtların "
-"desteklernmesini\n"
-"sağlar. Ayarlanmadığı sürece açılışta çalışmayacaktır, çalışmasına ihtiyaç "
-"duyulmayan \n"
-"makinalarda kurulu olması sorun oluşturmayacaktır."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper, NFS ve NIS gibi protokoller tarafından kullanılan RPC \n"
-"bağlantılarını düzenler. Portmap sunucusu RPC mekanizmasını kullanan\n"
-"protokollerle servis yapan makinelerde kurulu ve çalışıyor durumda olmalıdır."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix, elektronik postaları bir makinadan diğerine yollayan Elektronik "
-"Posta Aktarma Uygulamasıdır."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Yüksek kalite rastgele sayı üretimi için sistem entropi havuzunun \n"
-"saklanması ve yeniden eski haline getirilmesini sağlar."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Oracle gibi bazı uygulamalarla kullanmak için\n"
-"blok aygıtlarını (örn: sabit disk bölümleri)\n"
-"temel aygıtlarla eşlendirir"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed daemonu otomatik IP router tablosunun RIP protokolü tarafından\n"
-"yenilenmesine izin verir. RIP genelde küşük ağlarda kullanılır, daha büyük\n"
-"ağlarda daha karmaşık routing protokollerine ihtiyaç vardır."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolü bir ağdaki kullanıcıların o ağdaki herhangi bir\n"
-"makina hakkında performans ölçüleri alabilmelerini sağlar."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolü bir ağdaki kullanıcıların o ağda bulunan makinalarda\n"
-"çalışan kullanıcıları görmenizi sağlar."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolü, uzak kullanıcıların, rwho daemonu çalıştıran bir makinada\n"
-"bulunan tüm kullanıcıları görmelerine izin verir."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Ses sistemini Makinede uygula"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog, birçok daemonun mesajlarını çeşitli sistem kayıt dosyalarında\n"
-"tutmalarına izin verir. Syslog'un her zaman çalışır durumda olması\n"
-"akıllıca bir davranıştır."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "USB aygıtlarınız için dürücülerini yükleyiniz."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "X Font Sunucusu'nu çalıştırır (bunun kullanımı için XFree gerekir)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Açılış sırasında otomatik olarak başlatılacak hizmetleri seçiniz"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Yazdırılıyor"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Ä°nternet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Dosya paylaşımı"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Uzak Yönetim"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Veritabanı Sunucusu"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Hizmetler: %d / %d etkinleÅŸtirildi"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Hizmetler"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "çalışıyor"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "durdu"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Hizmetler ve artalan süreçleri"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Bu hizmet hakkında\n"
-"baÅŸka bilgi yok."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Önyükleme"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "BaÅŸlat"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Durdur"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Mandrake Linux 8.2'yi seçtiğiniz için teşekkür ederiz"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Açık Kaynak Kodu dünyasına hoş geldiniz"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSoft başarısı Özgür Yazılım felsefesi üzerine kuruludur. Yeni "
-"işletim sisteminiz dünya çapında Linux Camiasının ortaklaşa çalışmasının bir "
-"sonucudur.\n"
-"\n"
-"Çeviri hatalarını lütfen <nilgun@fide.org> adresine bildiriniz."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Serbest Yazılım dünyasına buyrun"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Açık Kaynak Kodu Camiasında siz de yerinizi alın. Öğrenmek, öğretmek ve "
-"başkalarına yardım etmek için forumlarımıza üye olup bilgilerinizi "
-"paylaşabilirsinz. İlginizi çekiyorsa, \"Community\" web sayfamızı ziyaret "
-"edin."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet ve HaberleÅŸme"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 Internette kullanabileceÄŸiniz herÅŸeyi saÄŸlar: Web "
-"sayfalarını gezmek ve görmek için Mozilla ve Konqueror, posta alışverişi "
-"için Evolution ve KMail, v.s."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Çoklu ortam ve Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 makinanızı sınırlarını zorlayarak bir çoklu ortam "
-"makinasına dönüştürebilir! Müzik çalmak, resim ve fotoğraflarınızı "
-"düzenlemek, TV ya da film izlemek için en son çıkan yazılımları içerir."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "GeliÅŸtirme"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 en güçlü geliştirme platformudur. Açık kaynak kodu "
-"geliştirme ortamının en iyisi olan GNU gcc derleyicisinin gücünü keşfedin."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrol Merkezi"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"The Mandrake Linux 8.2 Kontrol Merkezi Mandrake sisteminizi tamamen "
-"özelleştirebileceğiniz ve yapılandırabileceğiniz komple bir yazılımdır."
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Kullanıcı arabirimleri"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2, 11 farklı masaüstü yöneticisi ve ortamı sunar: GNOME "
-"1.4, KDE 2.2.2, Window Maker 0.8, ve diÄŸerleri"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Sunucu Yazılımı"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Makinanızı farenizin bir kaç tıklaması ile güçlü bir sunucu haline "
-"getirebilirsiniz: Web sunucu, e-posta, güvenlik kalkanı, yönlendirici, dosya "
-"ve yazıcı sunucusu,..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Oyunlar"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 en iyi Açık kaynak kodlu oyunlarla gelir: savaş, kart, "
-"spor, taktik ve strateji oyunları, v.s."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Linux'u basitçe, kolayca ve ücretsiz öğrenmek ister misiniz? MandrakeSoft "
-"ücretsiz Linux eğitimi veriyor. Mandrake Kampüsünde -- internetteki eğitim "
-"merkezimiz -- bilginizi test ederek bunu sağlıyor."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Linux Camiasının ve MandrakeSoft'un kaliteli desteği hemen köşeyi dönünce "
-"karşınızda; bir Linux ustası ya da bir \"Uzman\" olmaya hazırsanız gelin "
-"bizim destek web sitemizde bilgilerinizi paylaşın"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"IT projeleriniz ekibimiz tarafından analiz edilerek sizin için en iyi iş "
-"çözümleri üretilebilir."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Linux üzerindeki özel çözümlerimize bakmak için e-mağazamızı ziyaret edin."
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"MandrakeSoft'un Profesyonel Hizmetleri ve ticari faaliyetleri hakkında daha "
-"fazla bilgi edinmek için lütfen aşağıdaki web sayfasını ziyaret ediniz:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Paketler kuruluyor..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Bölümlendirme tablonuz okunamıyor, galiba biraz bozulmuş :-(\n"
-"Bozulmuş bolümler düzeltilmeye çalışılacak"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Hata!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Gerekli imaj dosyası %s i bulamadım."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Otomatik kurulum yapılandırıcısı"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Otomatik kurulum disketini yapılandırmak üzeresiniz. Bu özellik biraz "
-"tehlikelidir ve dikkatli kullanılmalıdır.\n"
-"\n"
-"Bu disket kullanılarak yapılan kurulum bazı aşamalarda bazı değerlerin "
-"girilmesi için etkileşimli olacaktır.\n"
-"\n"
-"Güvenliğiniz için, disk bölümlendirme ve biçemlendirme kesinlikle otomatik "
-"olarak yapılmayacaktır.\n"
-"\n"
-"Devam etmek istiyor musunuz?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Otomatik adım yapılandırması"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Lütfen kurulumun etkileşimli olmasını istediğiniz aşamalarını seçiniz, "
-"seçmezseniz bu işi kendiniz elle yapmak zorunda kalacaksınız."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"HoÅŸ Geldiniz\n"
-"\n"
-"Otomatik kurulum parametrelerini soldaki bölümde bulabilirsiniz"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Tebrikler!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disket kusursuzca oluÅŸturuldu.\n"
-"Geride kalan kurulumunuza devam edebilirsiniz."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Otomatik Kurulum"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Bir öğe ekle"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Son öğeyi kaldır"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                 DrakYedekleme Raporu \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                DrakYedekleme Sunucusu Raporu\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"         DrakYedekleme Raporunun Ayrıntıları\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "toplam iÅŸlem"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sistem dosyalarını yedekle..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Sabit disk yedekleme dosyaları..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Kullanıcı dosyalarını yedekle..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Sabit Disk Yedekleme Ä°ÅŸlemi..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Diğer dosyaları yedekle..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"dosya listesini FTP ile gönder: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP bağlantısında sorun: Yedeklenen dosyaları FTP ile göndermek mümkün "
-"olmadı.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Posya gönderme sırasında hata. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Dosya Seçimi"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Dosyaları ve dizinleri seçin ve 'Ekle'ye tıklayın"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Lütfen size gereken tüm seçenekleri işaretleyiniz.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Bu seçeneklerle /etc dizinindeki tüm dosyaları yedekleyebilir ve geri "
-"alabilirsiniz.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sistem Dosyalarınızı Yedekler. (/etc dizini)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Fark yedeklemesi Kullanılsın (eski yedeklemeler kullanılmaz)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Kritik dosayalar yedeklenmesin (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Bu seçenekle /etc dizininizin herhangi bir sürümünü geri alabilirsiniz"
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Lütfen yedeklemede içerilmesini istediğiniz tüm kullanıcıları işaretleyin."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Tarayıcının bellekleme dosyaları yedeklenmesin"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Fark Yedeklemesi Yapılsın (eski yedeklemeler kullanılmaz)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Seçilenleri Sil"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Kullanıcılar"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Yedeklemede FTP bağlantısı kullanılsın"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Lütfen makina adını ya da IP numarasını giriniz."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Yedekleri yerleÅŸtireceÄŸiniz\n"
-"dizinin adını yazınız."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Lütfen kullanıcı adınızı yazınız"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Lütfen parolanızı yazınız"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Bu parolayı hatırla"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP Bağlantısı"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Güvenli Bağlantı"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Yedeklemede CD/DVDROM kullanılsın"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Lütfen CD alanınızı seçiniz."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "CDRW ortamı kullanıyorsanız işaretleyin"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Önce CDRW silinsin isterseniz işaretleyin"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"CD'nizin üzerinde kurulum önyüklemesi\n"
-"bulunmasını istiyorsanız işaretleyin."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Lütfen CD yazıcınızın aygıt ismini yazın\n"
-" örn: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Yedeklemede teyp kullan"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Lütfen yedekleme için kullanılacak aygıt ismini giriniz"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Drakbackup için izin verilen\n"
-"en büyük boyutu giriniz"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Lütfen kaydedilecek dizini yazın:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Yedekleme dosyaları için kota kullanılsın"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "AÄŸ"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Sabit Disk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "saatlik"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "günlük"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "haftalık"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "aylık"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Ardsüreç kullanılsın"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Lütfen yedeklemeler arasındaki süreyi seçin."
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Lütfen yedekleme\n"
-"ortamını seçin"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Ardsüreçli Sabit Disk Kullanılsın"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Ardsüreçli FTP kullanılsın"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Lütfen hizmetler arasında crond'nin de bulunduğundan emin olun."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Her yedeklemeden sonra raporu postala:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Ne"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Nereye"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Ne Zaman"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Diğer Seçenekler"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup Yapılandırması"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Lütfen yedeklenecek yeri seçiniz."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "Sabit Diskte"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "Ağ üzerinde"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Lütfen neyi yedekleyeceğinizi seçiniz."
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sistem yedeklensin"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Kullanıcılar yedeklensin"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Kullanıcılar elle seçilsin"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Yedekleme Kaynakları: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Sistem Dosyaları:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Kullanıcı Dosyaları:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- DiÄŸer Dosyalar:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Sabit diskteki kayıt yeri: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- FTP kaydı yapılacak makina: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t kullanıcı ismi: %s\n"
-"\t\t     dosya yolu: %s\n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Seçenekler:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tSistem Dosyaları Bulunmasın\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tYedeklerde tar ve bzip2 kullanılsın\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tYedeklerde tar ve gzip kullanılsın\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Ardsüreç (%s) bulunsun :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Sabit disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-FTP ile AÄŸ.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-SSH ile AÄŸ.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Yapılandırılmamış, lütfen 'Sihirbaz'a ya da 'Gelişmiş'e tıklayın.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Yerine konulacak verinin listesi:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Bozuk veri listesi:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Lütfen bir daha sefere işareti kaldırın ya da silin."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Yedek dosyaları bozulmuş"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "                  Seçtiğiniz her şey                    "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          %s üzerindeki yerine kondu       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "        Geri Alma Yapılandırması     "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Diğer dosyaları da geri almak için Tamam'a tıklayın."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Geri alınacak kullanıcı listesi (her kullanıcı için en son tarih önemlidir)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Önce yedeklenecek sistem dosyaları:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "geri alma tarihini lütfen seçiniz"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Yedeklemede Sabit Disk Kullanılsın"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Sabit Diskten Alınsın."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Lütfen yedeklerin bulunduğu dizini yazınız"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Yedeklerin bulunduğu ortamı seçiniz"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "DiÄŸer Ortam"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Sistemi geri al"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Kullanıcıları geri al"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "DiÄŸerlerini geri al"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Geri alınacak dizini seçin (/ yerine)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Geri almadan önce yeni yedekleme yapılsın (sadece fark yedeklemesinde)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Geri almadan önce kullanıcı dizinleri silinsin."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Tüm yedekler geri alınsın"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Özel Geri Alma"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Yardım"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Geri"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Kaydet"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Yedekle"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Geri Al"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Ä°leri"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Lütfen geri almadan önce yedekleme yapın...\n"
-"Ya da dosya yolunun doÄŸruluÄŸundan emin olun."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Posta gönderme sırasında hata\n"
-"  Rapor postası gönderilmedi\n"
-"  Lütfen sendmail yapılandırmasını\n"
-"  kontrol edin"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Kurulacak Paketler"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Dosyaların FTP üzerinden gönderilmesinde hata.\n"
-" Lütfen FTP yapılandırmanızı kontrol edin."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Lütfen geri alınacak veriyi seçin."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Lütfen yedekleme ortamını seçin."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Lütfen yedeklenecek veriyi seçin..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Yapılandırma dosyası bulunamadı.\n"
-"Lütfen Sihirbaz ya da Gelişmiş seçin."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "İnşaat Var ... lütfen bekleyin."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Sistem dosyaları yedeklensin"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Kullanıcı dosyaları yedeklensin"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "DiÄŸer dosyalar yedeklensin"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Ä°ÅŸlenen Toplam"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "dosyalar FTP üzerinden gönderiliyor"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Dosyalar gönderiliyor..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "CDROM'a atılacak verinin listesi."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Lütfen cd yazıcı hızını verin"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Lütfen CD Yazıcı aygıt ismini verin (örn: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Lütfen CD üzerinde kurulum önyüklemesi bulunacaksa işaretleyin."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Yapılandırma dosyasından Şimdi Yedekle"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Yedekleme Yapılandırmasını Göster."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Sihirbaz Yapılandırması"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Gelişmiş Yapılandırma"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Åžimdi Yedekle"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"seçenekler hakkında:\n"
-"\n"
-" Drakbackup bu adımda şunları değiştirmeye izin verir:\n"
-"\n"
-" - Sıkıştırma kipi:\n"
-"\n"
-"      Bzip2 sıkıştırmayı seçerseniz verileriniz gzip'inkinden\n"
-"      yalaşık % 2-10 daha fazla sıkıştırılır. Sıkıştırma işlemi\n"
-"      daha uzun (yaklaşık 10 katı) sürdüğünden bu seçenek\n"
-"      öntanımlı değildir.\n"
-"\n"
-" - Güncelleme kipi:\n"
-"\n"
-"      cvs'deki gibi, Drakbackup her dizindeki .backupignore\n"
-"      dosyalarını yoksayacaktır. Örneğin:\n"
-"      \t/*>cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Posta gönderme sırasında oluşan bazı hatalar postfix'in\n"
-" hatalı yapılandırmasından kaynaklanabilir. Bu sorunu\n"
-" çözmek için /etc/postfix/main.cf dosyasında alan ismi\n"
-" veya makina ismini belirtmelisiniz\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"seçenekler hakkında:\n"
-"\n"
-" - Sisten dosyaları yedeklensin:\n"
-"\n"
-"\tBu seçenek yapılandırma dosyalarınızın bulunduğu\n"
-"\t/etc dizininin yedeklenmesini sağlar. Lütfen\n"
-"\tgeri alma sırasında bu dosyaların üzerine yazılmamasına\n"
-"\tdikkat edin:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Kullanıcı dosyaları yedeklensin:\n"
-"\n"
-"\tYedeklemek istediğiniz tüm kullanıcıları seçmenizi\n"
-"\tsağlar. Yedeklemenin çok yer kaplamaması için web\n"
-"\ttarayıcı arabellekleme dizinlerinin yedeklenmemesi\n"
-"\tönerilir.\n"
-"\n"
-" - DiÄŸer dosyalar yedeklensin:\n"
-"\n"
-"\tBu seçenekle daha fazla ver yedeklenebilir. Diğer\n"
-"\tyedeklemeler gibi burada da fark yedeklemesi yapmak\n"
-"\tmümkün değildir.\n"
-"\n"
-" - Fark Yedeklemeleri:\n"
-"\n"
-"\tYedekleme için en güçlü seçenektir. Bu seçenek ilk\n"
-"\tdefasında tüm verilerinizin yedeklenmesini sağlar ve\n"
-"\tsonradan sadece farklar yedeklenir. Geri alma sırasında\n"
-"\ttarih belirterek belli bir tarihteki verilerinizi geri\n"
-"\talabilirsiniz.\n"
-"\tBu seçenek belirtilmediğinde her yedekleme bir önceki\n"
-"\tyedeklemeyi silecektir.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"geri alma hakkında:\n"
-"\n"
-"Sadece son alınan yedek kullanılacaktır, sadece fark yedeklemelerinde\n"
-"daha eski yedeklemeleri bire bir geri almak mümkündür.\n"
-"\n"
-"Bir kullanıcının yedeğinin geri alınmasını istemezseniz, onun tüm\n"
-"onay kutularındaki işaretleri kaldırın.\n"
-"\n"
-" - Fark Yedeklemeleri:\n"
-"\n"
-"\tYedekleme için en güçlü seçenektir. Bu seçenek ilk\n"
-"\tdefasında tüm verilerinizin yedeklenmesini sağlar ve\n"
-"\tsonradan sadece farklar yedeklenir. Geri alma sırasında\n"
-"\ttarih belirterek belli bir tarihteki verilerinizi geri\n"
-"\talabilirsiniz.\n"
-"\tBu seçenek belirtilmediğinde her yedekleme bir önceki\n"
-"\tyedeklemeyi silecektir.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Telif Hakkı © 2001 MandrakeSoft adına DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Bu program bir serbest yazılımdır. Bu yazılımı Free Software Foundation\n"
-" tarafından yayınlanmış olan GNU Genel Kamu Lisansının 2. ya da daha "
-"sonraki\n"
-" bir sürümünün koşulları altında kopyalayabilir, dağıtabilir ve/veya\n"
-" üzerinde değişiklik yapabilirsiniz.\n"
-"\n"
-" Bu program kullanışlı olabileceği umularak dağıtılmaktadır. Ancak,\n"
-" hiçbir GARANTİSİ YOKTUR; hatta SATILABİLİRLİĞİ veya HERHANGİ BİR\n"
-" AMACA UYGUNLUĞU için bile garanti verilmez. Daha ayrıntılı bilgi\n"
-" edinmek için GNU Genel Kamu Lisansına bakınız.\n"
-"\n"
-" GNU Genel Kamu Lisansının bir kopyasını bu programla birlikte almış\n"
-" olacaksınız; yoksa Free Software Foundation, Inc., 59 Temple Place\n"
-" Suite 330, Boston, MA  02111-1307, USA. adresinden isteyebilirsiniz."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Açıklama:\n"
-"\n"
-"  Drakbackup sisteminizin yedeklenmesi içindir.\n"
-" Yapılandırma sırasındaki seçebilecekleriniz:\n"
-"\t- Sistem dosyaları, \n"
-"\t- Kullanıcı dosyaları, \n"
-"\t- DiÄŸer dosyalar.\n"
-"\t ya da Tüm sisteminiz ... ve Başka herşey (mesela Windows bölümleri)\n"
-"\n"
-"  Drakbackup ile yedek dosyalarınızı saklayabileceğiniz yerler:\n"
-"\t- Sabit Diskler.\n"
-"\t- AÄŸ dosya sistemi (NFS).\n"
-"\t- CDROM (CDRW), DVDROM \n"
-"\t\t(önyüklemeli, otomatik kurulum ya da kurtarma ile)\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Teyp.\n"
-"\n"
-"  Drakbackup seçeceğiniz bir dizine sisteminizi geri yükleyebilir.\n"
-"\n"
-"  Her yedeklemenin bilgileri /var/lib/drakbackup dizininde\n"
-"  saklanacaktır.\n"
-"\n"
-"  Yapılandırma dosyası:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Geri Alma Adımı:\n"
-"\n"
-"  Geri alma sırasında Drakbackup mevcut dizini silecek, tüm\n"
-"  yedekleri doğruladıktan sonra yazacaktır. Geri alma\n"
-"  işleminden önce son bir yedekleme yapılamsı tavsiye edilir.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"seçenekler hakkında:\n"
-"\n"
-"FTP yedekleme kullanırken lütfen dikkatli olun, çünkü sadece\n"
-"yedekleme yapıldıktan sonra yedekler FTP ile gönderilecektir.\n"
-"Yani yedekleme dosyaları önce sabit diskinize yazılacak sonra\n"
-"sunucuya gönderilecektir.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Yedekerin geri alınmasındaki sorunlar:\n"
-"\n"
-"Geri alam sırasında, Drakbackup dosyalarınızı yerine\n"
-"yazmadan önce doğrulayacaktır. Geri yazma işlemine\n"
-"başlamadan önce yazacağı dizini sileceğinden bu\n"
-"dizindeki tüm bilgiyi kaybedeceksiniz. Yedeklenmiş\n"
-"verilerinizi elle düzenlememeniz gereklidir. Buna\n"
-"özellikle dikkat edin.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Açıklama:\n"
-"\n"
-"  Drakbackup sisteminizin yedeklenmesi içindir.\n"
-"  Yapılandırma sırasındaki seçebilecekleriniz:\n"
-"\t- Sistem dosyaları, \n"
-"\t- Kullanıcı dosyaları, \n"
-"\t- DiÄŸer dosyalar.\n"
-"\t ya da Tüm sisteminiz ... ve Başka herşey (mesela Windows bölümleri)\n"
-"\n"
-"  Drakbackup ile yedek dosyalarınızı saklayabileceğiniz yerler:\n"
-"\t- Sabit Diskler.\n"
-"\t- AÄŸ dosya sistemi (NFS).\n"
-"\t- CDROM (CDRW), DVDROM \n"
-"\t\t(önyüklemeli, otomatik kurulum ya da kurtarma ile)\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Teyp.\n"
-"\n"
-"  Drakbackup seçeceğiniz bir dizine sisteminizi geri yükleyebilir.\n"
-"\n"
-"  Her yedeklemenin bilgileri /var/lib/drakbackup dizininde\n"
-"  saklanacaktır.\n"
-"\n"
-"  Yapılandırma dosyası:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Geri Alma Adımı:\n"
-"\n"
-"  Geri alma sırasında Drakbackup mevcut dizini silecek, tüm\n"
-"  yedekleri doğruladıktan sonra yazacaktır. Geri alma\n"
-"  işleminden önce son bir yedekleme yapılamsı tavsiye edilir.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s kurulumu başarısız oldu. Oluşan hata:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Yüklü yazıtiplerini ara"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Yüklü yazı tiplerini seçimden çıkar"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "tüm yazı tiplerini çözümle"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "hiç yazı tipi bulunamadı"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "bitti"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "bağlı disk bölümlerinizde hiç bir yazı tipi bulunamadı"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Doğru yazı tiplerini yeniden seç"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "hiç yazı tipi bulunamadı.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Yüklü olanlar listesideki yazı tiplerini ara"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Yazı tipleri kopyalanıyor"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type yazı tiplerinin kurulumu"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "ttmkfdir çalışıyor, lütfen bekleyiniz..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type kurulumu bitti"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Yazı tipi dönüşümü"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1 kurulumu"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript başvuruları"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf dönüşümü"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm dönüşümü"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Geçici dosyaları engelle"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "XFS'i yeniden baÅŸlat"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Yazı tipi Dosyalarını Engelle"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs'i yeniden baÅŸlat"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Herhangi bir yazı tipini sisteminize kurmadan önce kullanım hakkınız "
-"olduğundan emin olmalısınız.\n"
-"-Yazıtiplerini normal yoldan kurabilirsiniz. Genellikle, sağdan soldan "
-"toplanan bozuk yazı tipleri X sunucunuzun çökmesine sebep olur."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Yazı tiplerinin Alınması"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Windows Yazı tiplerini Al"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Yazı tiplerini Kaldır"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "İleri Düzey Seçenekler"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Yazı tipi Listesi"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Yazıtiplerini destekleyen uygulamaları seçiniz:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Temel Yazıcı"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Yazı tipi dosyasını ya da dizinini seçtikten sonra 'Ekle' ye tıklayınız."
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Listeyi Kur"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "eminseniz buraya tıklayın."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "aksi takdirde buraya tıklayın."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Tümünü Seçimden Çıkar"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Tümünü Seç"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Listeyi Sil"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Denetimler başlıyor"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Yazı tipleri sisteminize kopyalanıyor"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Yazı tiplerini kur ve dönüştür"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Kurulum Sonrası"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Yazı tipleri siseminizden kaldırılıyor"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Kurulumun kaldırılması Sonrası"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "İnternet Bağlantısı Paylaşımı"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "İnternet Bağlantısı Paylaşımı şu anda etkin"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet bağlantısı paylaşımı ayarları zaten yapılmış durumda.\n"
-"Paylaşım şu anda etkin.\n"
-"\n"
-"Ne yapmak istersiniz?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "pasif"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "vazgeç"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "yeniden ayarla"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Servisler PasifleÅŸtiriliyor..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "İnternet bağlantısı paylaşımı şu anda pasifleştirildi."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "İnternet bağlantısı paylaşımı şu anda etkin değil"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet bağlantısı paylaşımı ayarları zaten yapılmış durumda.\n"
-"Paylaşım şu anda etkin değil.\n"
-"\n"
-"Ne yapmak istersiniz?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "EtkinleÅŸtir"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Servisler EtkinleÅŸtiriliyor..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "İnternet Bağlantısı Paylaşımı şu anda etkinleştirildi."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Bilgisayarınız internet bağlantısını paylaşmak için ayarlanabilirsiniz.\n"
-"Bu özellik sayesinde ağınıza bağlı diğer bilgisayarlarda internet üzerinden "
-"istedikleri bilgiye ulaÅŸabilirler.\n"
-"\n"
-"Not: Yerel ağınızı(LAN) ayarlamak için bir ağ bağdaştırıcısına (eternet "
-"kartına) ihtiyacınız var."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s Arayüzü (%s modülü kullanılarak)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "%s Arayüzü"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Sisteminizde ağ bağdaştırıcısı bulunamadı!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Sisteminizde eternet ağ bağdaştırıcısı bulunamadı. Lütfen donanım ayar "
-"aracını çalıştırın."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "AÄŸ arabirimi"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sisteminizde sadece bir tane yapılandırılmış ağ bağdaştırıcısı bulunuyor:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerel ağınız şimdi bu bağdaştırıcıyla yapılandırılacak."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Lütfen hangi ağ bağdaştırıcısının yerel ağınıza bağlanacağını seçin."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Ağ bağdaştırıcı zaten yapılandırılmış"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Uyarı, ağ bağdaştırıcı (%s) zaten yapılandırılmış.\n"
-"\n"
-"Bir otomatik yeniden yapılandırma ister misiniz?\n"
-"\n"
-"Ne yapılacağını biliyorsanız bu işlemi elle de yapabilirsiniz."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Otomatik yeniden yapılandırma"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Mevcut bağdaştırıcı yapılandırmasını göster"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"`%s' için mevcut yapılandırma:\n"
-"\n"
-"AÄŸ: %s\n"
-"IP adresi: %s\n"
-"IP öznitelikleri: %s\n"
-"Sürücü: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"DHCP sunucunuzun ayarları var kabuluyle mevcut yapılandırmanız saklanabilir; "
-"bu durumda yerelağınızda kullandığınız C sınıfı ağın doğru algılanıp "
-"algılanmadığını kontrol etmelisiniz; Kurulum, onu yeniden yapılandırmayacak "
-"ve DHCP sunucu yapılandırmanıza dokunmayacaktır.\n"
-"\n"
-"DHCP sunucunuz yapılandırılmamışsa, ağ bağdaştırıcınız ve bir DHCP sunucusu "
-"kurulum programı tarafından yapılandırılabilir.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-Sınıfı Yerel Ağ"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Bu) DHCP sunucu IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Bağdaştırıcıyı ve DHCP sunucusunu yeniden yapılandır"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Yerel Ağ `.0' ile bitmiyor, bırakılıyor."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s ayarlarında muhtemel bir yerel ağ adresi çakışması bulundu!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Bir güvenlik kalkanı yapılandırılması bulundu!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Uyarı! Hazır bir güvenlik kalkanı yapılandırması bulundu. Kurulumdan sonra "
-"birkaç düzeltmeye ihtiyaç duyabilir."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Yapılandırılıyor..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Betikler ayarlanıyor, yazılım kuruluyor, sunucular başlatılıyor..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi kurulumunda problem"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tüm ayarlar tamam.\n"
-"Şimdi internet bağlantısını otomatik ağ yapılandırılması (DHCP) ile yerel "
-"ağınızdaki başka bilgisayarlara paylaştırabilirsiniz."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Ayarlar daha önceden yapılmış şekilde , ama o pasif halde ayarlı."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Ayarlar daha önceden yapılmış şekilde ,ve o aktif halde ayarlı."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internet Bağlantısı Paylaşımı yapılandırması yok"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Internet bağlantısı paylaşımı yapılandırması"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Internet Bağlantısı Paylaşımı uygulama gereçlerine hoşgeldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"Ayarlama sihirbazını başlatmak için \"Yapılandır\"a basın!"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ağ Yapılandırması(%d bağdaştırıcı)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profili sil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Silinecek Profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Yeni Profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Oluşturulacak olan profilin adı( bu profil şu ankinin bir kopyası olacaktır )"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Makina adı:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet eriÅŸimi"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Türü:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Ağ geçiti:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Arayüz:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Durum:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Lütfen bekleyin"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Internet Erişimini Yapılandır..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Yerel Ağ yapılandırması"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Sürücü"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Arayüz"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Durum"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Yerel ağı yapılandır.."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Sihirbazı başlatmak için buraya tıklayınız ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Sihirbaz..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Uygula"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Lütfen Bekleyiniz... Yapılandırmalar aktifleştiriliyor"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Bağlanıldı"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Bağlanılamadı"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "BaÄŸlan..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Bağlantıyı Kes..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Uyarı, başka bir Internet bağlantısı saptandı, ağınız kullanıyor olabilir"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Hiç bir arayüz yapılandırılmamış.\n"
-"Yapılandırmak için ilk önce 'Yapılandır'a tıklayın"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Yerel ağ ayarları"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Bağdaştırıcı %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Önyükleme Protokolü"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Önyüklemede başlatılan"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP istemci"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "ÅŸimdi etkinleÅŸtir"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "ÅŸimdi pasifleÅŸtir"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Bu bağdaştırıcı henüz yapılandırılmamış.\n"
-"Ana penceredeki yapılandırma sihirbazını çalıştırın"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Siz Internet bağlantısına sahip değilsiniz \n"
-"Oluşturmak için ilk adım olarak 'Yapılandır'a tıklayınız"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internet bağlantısı ayarları"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internet Bağlantısı Ayarları"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Bağlantı türü: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Paremetreler"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Ağ geçiti"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ağ kartı"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Ä°stemci"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Güvenlik seviyesinin ayarlanması"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrol Merkezi"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Kullanmak istediğiniz araçları seçin"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kablo)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "ABD (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "ABD (kablo)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "ABD (kablo-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Çin (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonya (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonya (kablo)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "DoÄŸu Avrupa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Ä°rlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Batı Avrupa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Avusturalya"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Yeni Zelanda"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Güney Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Arjantin"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Lütfen,\n"
-"TV standardınızı ve ülkenizi yazınız"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV standardı (PAL):"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Bölge (Batı Avrupa):"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Yayındaki TV kanalları taranıyor..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "TV kanalları taranıyor"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "kullanımı: keyboarddrake [--expert] [klavye]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Lütfen, klavye yerleşimini seçiniz."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace duşunun Silme işlemi yapmasını ister misiniz?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cd-rom'u deÄŸiÅŸtir"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Lütfen kurulum CD'sini sürücünüze yerleştirin ve sonra Tamam'a basın.\n"
-"Eğer elinizde yoksa, canlı güncellemeden vazgeçmek için Vazgeç'e basın."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Canlı güncelleme başlatılamıyor !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Değişklik bitti, fakat etkinleşmesi için sistemden çıkmalısınız"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Sadece bugünlük olanları göster"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Dosya/_Yeni"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>Y"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Dosya/_Aç"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Dosya/_Kaydet"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>K"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Dosya/_Farklı Kaydet..."
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Dosya/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Seçenekler"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Seçenekler/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Yardım"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Yardım/_Hakkında..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-9,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-9,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Kullanıcı"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Ä°letiler"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Sistem Günlüğü"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake Araçları Açıklamaları"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "ara"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Günlük kayıtlarınızı görüntüleyen bir araç"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Ayarlar"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "karşılaştırılıyor"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "fakat uymuyor"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Dosya seçin"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Takvim"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Dosya içeriği"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Posta/SMS uyarısı"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Lütfen dosya ayrıştırılırken bekleyiniz: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Posta/SMS uyarı ayarları"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"posta/SMS yapılandırma aracına hoş geldiniz.\n"
-"\n"
-"Burada, uyarı sistemini yapılandırabilirsiniz\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "hizmet ayarları"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Seçili hizmetlerden biri çalışmadığında bir uyarı alacaksınız"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "yük ayarı"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Yük bu değerden fazlaysa bir uyarı alacaksınız"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "uyarı yapılandırması"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Sistemin sizi nasıl uyaracağını yapılandırır"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Farklı Kaydet..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Lütfen farenizin türünü seçin."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "bir seri_usb aygıtı bulunamadı\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "3 tuş öykünümü?"
-
-# #this format isn't supported yet by perl :-((
-# #msgid "%s found on %s, configure it ?"
-# #msgstr "%2$s üzerinde %1$s bulundu, yapılandırılsın mı?"
-#: ../../standalone/scannerdrake_.c:53
-#, fuzzy, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%2$s üzerinde %1$s bulundu, yapılandırılsın mı?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Bir tarayıcı seçiniz"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Bu %s tarayıcısı desteklenmiyor"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Önyükleme Aygıtı"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Bu %s tarayıcısı printerdrake ile yapılandırılmalı.\n"
-"printerdrake'i Mandrake Kontrol Merkezinin Donanım bölümünden "
-"çalıştırabilirsiniz."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Güvenlik Kalkanı Ayarları"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Güvenlik kalkanı ayarları"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Güvenlik Kalkanı\n"
-"\n"
-"Güvenlik kalkanı zaten yapılandırılmış.\n"
-"Değişiklik yapmak yada kaldırmak için Ayarlara tıklayın"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Güvenlik Kalkanı\n"
-"\n"
-"Bir Standart Güvenlik Kalkanı ayarı için Ayarlar'a tıklayın"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kullanacağınız dili seçin"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Kurulum sınıfını seçin"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Sabit disk algılaması"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Fare ayarları"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klavyenizi seçin"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Güvenlik"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dosya sistemleri Ayarları"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Bölümleri biçemlendir"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Kurulacak paketleri seçin"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistem kurulumu"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Kullanıcı Ekleme"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ağ Ayarları"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Hizmet Ayarları"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Önyükleyiciyi Kurulumu"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Açılış Disketi Oluşturma"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X Yapılandırması"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Sistem güncellemeleri kurulumu"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Kurulumdan Çık"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Kolay Güvenlik Duvarı Yapılandırıcı\n"
-"\n"
-"Bu Mandrake Linux makinası için kişisel güvenlik duvarınızı\n"
-"yapılandırır. Güçlü bir güvenlik duvarı çözümü için, lütfen\n"
-"\"MandrakeSecurity Firewall\" dağıtımına bakınız."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Şimdi, Internet'te kullanmak istediğiniz hizmetler hakkında sorular\n"
-"sorulacaktır. Makinanızın güvenliği çok önemlidir. Bu bakımdan bu\n"
-"soruları cevaplandırırken iyi düşünün.\n"
-"\n"
-"Lütfen, kullandırmak istemediğiniz hizmetleri güvenlik duvarı ile "
-"kapatınız.\n"
-"Bu uygulamayı yeniden çalıştırarak her zaman bu yapılandırmayı\n"
-"deÄŸiÅŸtirebilirsiniz!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Internet'ten erişilecek bir web sunucusu çalıştıracak mısınız?\n"
-"Web sunucusunu sadece kendi ihtiyaçlarınız için kullanacaksanız,\n"
-"Internet'ten erişilmesini istemiyorsanız bu soruya\n"
-"\"HAYIR\" cevabı veriniz.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Bir isim sunucusu (DNS) çalıştıracak mısınız?\n"
-"Tüm Internet'e IP ve alan bilgileri sunumu yapmayacaksanız\n"
-"lütfen bu soruya \"HAYIR\" cevabı veriniz.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Gelen Güvenlik Kabuğu (SSH) bağlantılarına izin verecek misiniz?\n"
-"Bu makinanıza giriş yapmak isteyenlerin Telnet yerine kullanacakları\n"
-"yüksek güvenlikli bir kabuk sunar. Telnet kullanıyorsanız hemen bu\n"
-"kabuğu kullanmaya başlamanız önerilir. Telnet kullanıldığında sisteme\n"
-"giriş parolanız kolayca başkaları tarafından Internet üzerinde ele\n"
-"geçirilebilir. Halbuki ssh parolanızı da şifrelediğinden buna izin\n"
-"vermez."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Telnet bağlantılarına izin verecek misiniz?\n"
-"Önceki ekranda da açıklandığı gibi ürkütücü şekilde güvensizdir.\n"
-"Bu soruya \"HAYIR\" cevabı vermeniz, gerekiyorsa telnet yerine ssh\n"
-"kullanmanız önerilir.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Internet'ten eriÅŸilebilir bir FTP hizmeti verecek misiniz?\n"
-"Bunu yapacaksanız sadece anonim dosya aktarımı için kullanılması\n"
-"önerilir. FTP parola aktarımı sırasında şifreleme yapılamadığından,\n"
-"bu parolalar Internet'te kötü niyetli kişilerce ele geçirilebilir.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Bir posta sunucusu çalıştıracak mısınız? \n"
-"İletilerinizi pine, mutt ya da herhangi bir metin tabanlı\n"
-"posta istemcisi ile gönderiyorsanız bu hizmete ihtiyacınız\n"
-"olacaktır. Aksi takdirde güvenlik duvarı bu hizmeti kapatacaktır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Bir POP ya da IMAP sunucusu çalıştıracak mısınız?\n"
-"Bu makina üzerinden web bazlı olmayan hesaplar\n"
-"sunmak için kullanılır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"Sisteminiz 2.2 serisi bir çekirdekle çalışıyor gibi gözüküyor.\n"
-"EÄŸer aÄŸ ip'niz otomatikman evinizdeki veya ofisinizdeki bir bilgisayardan\n"
-" belirleniyorsa buna izin vermelisiniz . Bu konuda ne düşünüyorsunuz ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Makinanız zamanı başka bir makinadan alacak mı?\n"
-"Çoğunlukla orta ya da büyük Unix/Linux ağlarında\n"
-"sistem girişlerinde ve çeşitli ortak işlerin yapılması\n"
-"sırasında eşzamanlamayı sağlamak üzere buna ihtiyaç\n"
-"duyulur. Büyük bir işyerinde çalışmıyorsanız ya da bu\n"
-"konuda bir şey duymadıysanız, bu özelliği kullanmayabilirsiniz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Yapılandırma Tamamlandı. Bu ayarların diskte saklanmasını ister misiniz ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s açılamıyor: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%s yazmak için açılamıyor : %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Hayır, DHCP kullanılmayacak"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Evet, DHCP gerekiyor"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Hayır, NTP kullanılmayacak"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Evet, NTP gerekiyor"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "KaydetMe"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Kaydet ve Çık"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Güvenlik Duvarı Sihirbazı"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Hayır (internetten erişilmesin)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Evet (güvenilk duvarı üzerinden buna izin ver)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Lütfen bekleyin, Kurulu paketler doğrulanıyor"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Gerekli paketler kurulurken hata oluÅŸtu: %s.\n"
-" Bunları kendiniz kurmaya çalışın."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ağ Makinası (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS sunucusu, SMB sunucusu, Vekil Sunucu, ssh Sunucu"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ofis"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Ä°ÅŸ istasyonu"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot ya da Visor'unuz için araçlar"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Ä°ÅŸ istasyonu"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Güvenlik Kalkanı/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Alan adı ve Ağ Bilgileri Sunucusu"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Ofis programları: kelime işlemciler (kword, abiword), kspread, gnumeric, pdf "
-"göstericiler, vb.."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Sesle ilgili araçlar: mp3 ya da midi çalıcılar, karıştırıcılar, vb.."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Serbest Yazılım ve Linux üzerine Kitaplar ve Nasıl belgeleri"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Ä°ÅŸ istasyonu"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Çoklu ortam - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "E-posta, haber grubu, web, dosya transferi ve sohbet araçları"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Veritabanı"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL veya MySQL veritabanı sunucusu"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Sisteminizin ayarlarını düzenleyecek uygulama"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Çoklu ortam - Ses"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Gereçler"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Belgeler"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsol Araçları"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix Posta sunucusu, Inn haber sunucusu"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet konsolu"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Çoklu ortam konsolu"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Yapılandırma"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Diğer Grafiksel Masaüstleri (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE Masaüstü Ortamı, temel grafik ortamla birlikte birleşik araçlar"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafik Ortamı"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache ve Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD-R ve CD-RW yazmaya yarayan araçlar"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Ofis iÅŸ istasyonu"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Sunucu"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, vb.."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Gimp gibi grafik programları"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ve C++ geliştirme kütüphaneleri, programlar ve include dosyaları"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Ağ Makinası sunucusu"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Posta/Posta Listesi/Haberler(News)"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Oyun Konsolu"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video göstericiler ve düzenleyiciler"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Çoklu ortam - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Eğlence programları: kart oyunları, taktik ve strateji, vb.."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"E-posta alışverişi ve haber grubu istemci programları (pine, mutt, tin..) ve "
-"web istemcileri "
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arşivleme, emülatörler, izleme"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "KiÅŸisel Finans"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Kullanıcı dostu uygulamalar ve masaüstü araçlarına sahip görsel bir ortam "
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ssh içeren diğer ağ öğeleri için protokoller"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet ağ geçidi"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Ses ve video çalma/düzenleme uygulamaları"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Diğer Görsel Masaüstleri"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Metin düzenleyiciler, kabuklar, dosya araçları, terminaller"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Gnucash gibi finans programları"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Kişisel Bilgi Yönetimi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Çoklu ortam - CD Yazma"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Bilimsel Ä°ÅŸ istasyonu"
-
-#~ msgid "About"
-#~ msgstr "Hakkında"
-
-#~ msgid "             Help           "
-#~ msgstr "            Yardım          "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso10646-1,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr "Çekirdek modüllerine erişilemiyor (%s yok)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Hiç Biri"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Öntanımlı yazıcıyı belirtin!"
-
-#~ msgid ""
-#~ "With remote CUPS servers, you do not have to configure any printer here; "
-#~ "CUPS servers inform your machine automatically about their printers. All "
-#~ "printers known to your machine currently are listed in the \"Default "
-#~ "printer\" field. Choose the default printer for your machine there and "
-#~ "click the \"Apply/Re-read printers\" button. Click the same button to "
-#~ "refresh the list (it can take up to 30 seconds after the start of CUPS "
-#~ "until all remote printers are visible). When your CUPS server is in a "
-#~ "different network, you have to give the CUPS server IP address and "
-#~ "optionally the port number to get the printer information from the "
-#~ "server, otherwise leave these fields blank."
-#~ msgstr ""
-#~ "Uzak CUPS sunucularında ki yazıcıları burada yapılandıramazsınız. CUPS "
-#~ "sunucuları kendi yazıcıları hakkında makinanıza bilgi verecektir. "
-#~ "Makinanızda ki bilinen tüm yazıcılar \"Öntanımlı yazıcı\" alanında "
-#~ "listelenmiştir. \"Yazıcıları Uygula/Yeniden-oku\" düğmesi ile burada "
-#~ "öntanımlı yazıcınızı belirtebilirsiniz. Aynı düğme ile listeyi yeniden "
-#~ "okutabilirsiniz. (bu işlem CUPS'un başlatılmasından sonra tüm uzak "
-#~ "yazıcıların görünür olmasına kadar 30 saniye kadar sürebilir) CUPS "
-#~ "sunucuları başka bir ağ üzerindeyse, CUPS sunucusunun IP adresi ile "
-#~ "seçimlik olarak yazıcı bilgilerinin alınacağı port numarasını "
-#~ "verebilirsiniz. Aynı ağdaysanız bu alanları boş bırakınız."
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Yazıcıları Uygula/Yeniden-oku"
-
-#~ msgid "Configure printing system"
-#~ msgstr "Yazıcı sistemi yapılandırması"
diff --git a/perl-install/share/po/uk.po b/perl-install/share/po/uk.po
deleted file mode 100644
index d807c18b3..000000000
--- a/perl-install/share/po/uk.po
+++ /dev/null
@@ -1,14938 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# "Dmytro Koval'ov" <kov@tokyo.email.ne.jp>, 1999, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-09-13 18:59+09:00\n"
-"Last-Translator: Dmytro Koval'ov <kov@tokyo.email.ne.jp>\n"
-"Language-Team: Ukrainian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=koi8-u\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "óËÏÎƦ­ÕÒÕ×ÁÔÉ ×Ó¦ ÍÏΦÔÏÒÉ ÎÅÚÁÌÅÖÎÏ"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÒÏÚÛÉÒÅÎÎÑÍ Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "îÁÓÔÒϧÔÉ Ô¦ÌØËÉ ÐÌÁÔÕ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Ú Ë¦ÌØËÏÍÁ ÍÏΦÔÏÒÁÍÉ"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"÷ÁÛÁ ÓÉÓÔÅÍÁ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú Ë¦ÌØËÏÍÁ ÍÏΦÔÏÒÁÍÉ.\n"
-"ýÏ ×É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "÷ÉÂÅÒ¦ÔØ X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "÷ÉÂÅÒ¦ÔØ X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ÓÅÒ×ÅÒ"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ñËÕ ËÏÎƦÇÕÒÁæÀ XFree ×É ÈÏÞÅÔÅ ÍÁÔÉ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"÷ÁÛÁ צÄÅÏÐÌÁÔÁ ÍÏÖÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÁÐÁÒÁÔÎÉÍ ÐÒÉÓËÏÒÅÎÎÑÍ\n"
-"ÔÒØÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ ÁÌÅ Ô¦ÌØËÉ Ú ÓÅÒ×ÅÒÏÍ XFree %s. ÷ÁÛÁ צÄÅÏÐÌÁÔÁ\n"
-"ЦÄÔÒÉÍÕ¤ÔØÓÑ ÓÅÒ×ÅÒÏÍ XFree %s, Õ ÑËÏÍÕ ×É ÍÏÖÌÉ×Ï ÍÁÔÉÍÅÔÅ ËÒÁÝÉÊ\n"
-"ÓÕÐÒÏ×¦Ä ÄÌÑ Ä×ÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"÷ÁÛÁ צÄÅÏÐÌÁÔÁ ÍÏÖÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÁÐÁÒÁÔÎÉÍ 3D ÐÒÉÓËÏÒÅÎÎÑÍ ÇÒÁƦËÉ\n"
-"ÁÌÅ Ô¦ÌØËÉ Ú ÓÅÒ×ÅÒÏÍ XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s Ú ÁÐÁÒÁÔÎÉÍ ÐÒÉÓËÏÒÅÎÎÑÍ ÔÒØÏÈ×ÉͦÒÎϧ ÇÒÁƦËÉ"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"ãÑ ×¦ÄÅÏÐÌÁÔÁ ÍÁ¤ ЦÄÔÒÉÍËÕ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ\n"
-"ÇÒÁƦËÉ, ÁÌÅ Ô¦ÌØËÉ ÄÌÑ XFree %s, ÷¶äí¶ôøôå, ýï ãå åëóðåòéíåîôáìøîéê\n"
-"òåöéí, ñëéê íïöå ðòé÷åóôé äï úá÷éóáîîñ ÷áûïçï ëïíð'àôåòá."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-"XFree %s Ú åëóðåòéíåîôáìøîïà ЦÄÔÒÉÍËÏÀ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ "
-"ÇÒÁƦËÉ"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"ãÑ ×¦ÄÅÏÐÌÁÔÁ ÍÁ¤ ЦÄÔÒÉÍËÕ ÁÐÁÒÁÔÎÏÇÏ ÐÒÉÓËÏÒÅÎÎÑ ÔÒØÏÈ×ÉͦÒÎϧ\n"
-"ÇÒÁƦËÉ, ÁÌÅ Ô¦ÌØËÉ ÄÌÑ XFree %s, ÷¶äí¶ôøôå, ýï ãå åëóðåòéíåîôáìøîéê\n"
-"òåöéí, ñëéê íïöå ðòé÷åóôé äï úá÷éóáîîñ ÷áûïçï ëïíð'àôåòá. ÷ÁÛÁ ÐÌÁÔÁ\n"
-"ЦÄÔÒÉÍÕ¤ÔØÓÑ XFree %s, ÑËÉÊ ÍÁ¤ ËÒÁÝÕ Ð¦ÄÔÒÉÍËÕ Ä×Ï×ÉͦÒÎϧ ÇÒÁƦËÉ."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ÄÒÁÊ×ÅÒ ÄÉÓÐÌÅÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦ ÷ÁÛϧ ÇÒÁƦÞÎϧ ÐÌÁÔÉ"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÍÏΦÔÏÒÕ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "íÏΦÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"ä×Á ÄÕÖÅ ×ÁÖÌÉ×ÉÈ ÐÁÒÁÍÅÔÒÉ - ÃÅ ÞÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ\n"
-"(ÔÏÂÔÏ - ÞÁÓÔÏÔÁ, Ú ÑËÏÀ ÏÂÎÏ×ÌÀ¤ÔØÓÑ ÚÏÂÒÁÖÅÎÎÑ ÎÁ ÅËÒÁΦ), ÔÁ\n"
-"ÎÁʦÌØÛ ×ÁÖÌÉ×Ï - ÞÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎϧ ÓÉÎÈÒÏΦÚÁæ§ (ÔÏÂÔÏ - ÔÁ\n"
-"ÞÁÓÔÏÔÁ, Ú ÑËÏÀ ÎÁ ÅËÒÁΦ ÍÁÌÀÀÔØÓÑ ÇÏÒÉÚÏÎÔÁÌØΦ ÒÑÄËÉ).\n"
-"\n"
-"äõöå ÷áöìé÷ï ðáí'ñôáôé, ÝÏ ×É ÐÏ×ÉÎΦ ×ÉÂÒÁÔÉ ÔÁËÉÊ ÍÏΦÔÏÒ, ÐÁÒÁÍÅÔÒÉ\n"
-"ÑËÏÇÏ ÎÅ ÐÅÒÅ×ÉÝÕÀÔØ ÓÐÒÁ×ÖÎ¦È ÐÁÒÁÍÅÔÒ¦× ÷ÁÛÏÇÏ ÍÏΦÔÏÒÁ: ¦ÎÁËÛÅ ÷É\n"
-"ÍÏÖÅÔÅ ÐÒÉÞÉÎÉÔÉ ÎÅÐÏÐÒÁ×ÎÕ ÛËÏÄÕ Ó×ϤÍÕ ÍÏΦÔÏÒÕ. \n"
-"ñËÝÏ ×É ÍÁ¤ÔÅ ÓÕÍΦ×É ÝÏÄÏ ÈÁÒÁËÔÅÒÉÓÔÉË Ó×ÏÇÏ ÍÏΦÔÏÒÁ ×ÉÂÅÒ¦ÔØ ÐÅ×ÎÏ\n"
-"ǦÒÛÉÊ ÍÏΦÔÏÒ."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "þÁÓÔÏÔÁ ÇÏÒÉÚÏÎÔÁÌØÎϧ ÒÏÚÇÏÒÔËÉ"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ ÝÅ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÁ"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "×É ÝÅ ÎÅ ×ÉÂÒÁÌÉ ÒÏÚĦÌØÎÕ ÚÄÁÔΦÓÔØ"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"õ×ÁÇÁ!  ôÅÓÔÕ×ÁÎÎÑ Ã¦¤§ ÇÒÁƦÞÎϧ ÐÌÁÔÉ ÍÏÖÅ ÐÒÉÚ×ÅÓÔÉ ÄÏ ÚÁ×ÉÓÁÎÎÑ\n"
-"÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ."
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "ôÅÓÔÕ×ÁÎÎÑ ËÏÎƦ­ÕÒÁæ§"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ÐÏÐÒÏÂÕÊÔÅ ÚͦÎÉÔÉ ÄÅÑ˦ ÈÁÒÁËÔÅÒÉÓÔÉËÉ"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "÷ÉÈÏÄÖÕ ÞÅÒÅÚ %d ÓÅËÕÎÄ"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "ãŠצÒΦ ÕÓÔÁÎÏ×ËÉ?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ, ÐÏÐÒÏÂÕÊÔÅ ÚͦÎÉÔÉ ÄÅÑ˦ ÈÁÒÁËÔÅÒÉÓÔÉËÉ"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚĦÌØÎÕ ÚÄÁÔΦÓÔØ ÔÁ ˦ÌØ˦ÓÔØ ËÏÌØÏÒ¦×"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "óÅÒ×ÅÒ XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "ýÅ"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "çÁÒÁÚÄ"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "åËÓÐÅÒÔÎÉÊ ÒÅÖÉÍ"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "ðÏËÁÚÁÔÉ ×ÓÅ"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "òÏÚĦÌØΦ ÚÄÁÔÎÏÓÔ¦"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "òÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "ôÉÐ ÍÉÛ¦: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "óÐÅæÁÌØÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÉÛ¦: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "íÏΦÔÏÒ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "çÏÒÉÚÏÎÔÁÌØÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÍÏΦÔÏÒÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "þÁÓÔÏÔÁ ×ÅÒÔÉËÁÌØÎϧ ÒÏÚÇÏÒÔËÉ ÍÏΦÔÏÒÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "÷¦ÄÅÏ ÐÌÁÔÁ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "÷¦ÄÅÏ ÐÁÍ'ѦÔØ: %sËÂ\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "çÌÉÂÉÎÁ ËÏÌØÏÒÕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "òÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "X ÓÅÒ×ÅÒ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ÄÒÁÊ×ÅÒ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "ð¦ÄÇÏÔÏ×ËÁ ËÏÎƦÇÕÒÁæ§ X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "ñË ×É ÈÏÞÅÔÅ ÎÁÓÔϧÔÉ Ó×ÏÀ ÓÉÓÔÅÍÕ"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "úͦΦÔØ ÍÏΦÔÏÒ"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "úͦΦÔØ ×¦ÄÅÏ ÐÌÁÔÕ"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "úͦΦÔØ ÐÁÒÁÍÅÔÒÉ ÓÅÒ×ÅÒÁ"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "úͦΦÔØ ÒÏÚĦÌØÎÕ ÚÄÁÔΦÓÔØ"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "ðÏËÁÚ ¦ÎÆÏÒÍÁæ§"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "ýÅ ÏÄÉÎ ÔÅÓÔ"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "÷ÉȦÄ"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"úÂÅÒÅÇÔÉ ÚͦÎÉ?\n"
-"¶ÓÎÕÀÞÁ ËÏÎƦÇÕÒÁæÑ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "óÔÁÒÔÕ×ÁÔÉ X Á×ÔÏÍÁÔÉÞÎÏ"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"ñ ÍÏÖÕ ÎÁÓÔÒϧÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ÔÁË, ÝÏ X ÂÕÄÅ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ЦÓÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"þÉ ×É ÈÏÞÅÔÅ, ÝÏ X ÓÔÁÒÔÕ×Á× Á×ÔÏÍÁÔÉÞÎÏ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "úÁÒŤÓÔÒÕÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ, ÝÅ ÒÁÚ Õ %s ÝÏ ÐÒÉ×ÅÓÔÉ Õ Ä¦À ÚͦÎÉ"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÉÊĦÔØ ¦Ú ÓÉÓÔÅÍÉ ¦ ÐÏÔ¦Í ÓËÏÒÉÓÔÕÊÔÅÓÑ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "265 ËÏÌØÏÒ¦× (8 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ÔÉÓÑÞ¦ ËÏÌØÏÒ¦× (15 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ÔÉÓÑÞ ËÏÌØÏÒ¦× (16 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ͦÌØÊÏÎ¦× ËÏÌØÏÒ¦× (24 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ͦÌØÊÑÒÄÉ ËÏÌØÏÒ¦× (32 ¦Ô)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ËÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ËÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 íÂ"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 í ÞÉ Â¦ÌØÛÅ"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "óÔÁÎÄÁÒÔÎÉÊ VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr " óÕÐÅÒ VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-"óÕͦÓÎÉÊ Ú 8514, 1024x768 at 87 Hz ÞÅÒÅÚÓÔÒÏÞÎÁ ÒÏÚÇÏÒÔËÁ (ÂÅÚ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "óÕÐÅÒ VGA, 1024x768 at 87 Hz ÞÅÒÅÚÓÔÒÏÞÎÁ ÒÏÚÇÏÒÔËÁ, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "òÏÚÛÉÒÅÎÉÊ óÕÐÅÒ VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA ÂÅÚ ÞÅÒÅÚÓÔÒÏÞÎϧ ÒÏÚÇÏÒÔËÉ , 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "÷ÉÓÏËÏÞÁÓÔÏÔÎÉÊ SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr ""
-"¶Ú ÚͦÎÎÏÀ ÞÁÓÔÏÔÏÀ, ÑËÉÊ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr ""
-"¶Ú ÚͦÎÎÏÀ ÞÁÓÔÏÔÏÀ, ÑËÉÊ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr ""
-"¶Ú ÚͦÎÎÏÀ ÞÁÓÔÏÔÏÀ, ÑËÉÊ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "íÏΦÔÏÒ, ÝÏ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "íÏΦÔÏÒ, ÝÏ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÒÅÖÉÍÁÍÉ ÄÏ 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÓÉÓÔÅÍÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ (boot partition)"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "ðÅÒÛÉÊ ÓÅËÔÏÒ ÄÉÓËÕ (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "õÓÔÁÎÏ×ËÁ SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÒÔÏ×ÉÊ ÂÌÏË?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "õÓÔÁÎÏ×ËÁ LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO Ú ÇÒÁƦÞÎÉÍ ÍÅÎÀ"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "úÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ Ú DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaoot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "ïÓÎÏ×Φ ÏÐæ§ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "õÓÔÁÎÏ×ËÁ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ÎÅ ÐÒÁÃÀ¤ ¦Ú ÓÔÁÒÉÍÉ BIOS'ÁÍÉ)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "ëÏÍÐÁËÔÎÉÊ"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "ËÏÍÐÁËÔÎÉÊ"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "÷¦ÄÅÏ ÒÅÖÉÍ"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "ðÁÒÏÌØ"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "ðÁÒÏÌØ (ÝÅ ÒÁÚ)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "ïÂÍÅÖÉÔÉ ÏÐæ§ ËÏÍÁÎÄÎÏÇÏ ÒÑÄËÁ"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ÏÂÍÅÖÉÔÉ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "ïÞÉÝÁÔÉ /tmp ÐÒÉ ËÏÖÎÏÍÕ ÐÅÒÅ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "ôÏÞÎÉÊ ÏÂ'¤Í ÐÁÍ'ÑÔ¦ (RAM). úÎÁÊÄÅÎÏ %d íÂ"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "äÏÚ×ÏÌÉÔÉ ÂÁÇÁÔÏÐÒÏƦÌØΦÓÔØ"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "äÁ×ÁÔÉ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦ × íÂ"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ïÐÃ¦Ñ ``ïÂÍÅÖÉÔÉ ÏÐæ§ ËÏÍÁÎÄÎÏÇÏ ÒÑÄËÁ'' ÎÅ ÍÁ¤ ÓÅÎÓÕ ÂÅÚ ÐÁÒÏÌÑ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "úÁÔÒÉÍËÁ Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "úÁÔÒÉÍËÁ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÑÄÒÁ"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "ïÓÎÏ×ÎÁ ÓÉÓÔÅÍÁ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ôÕÔ ÎÁ×ÅÄÅΦ Ò¦ÚÎÏÍÁΦÔΦ ÐÕÎËÔÉ.\n"
-"×É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "äÏÄÁÔÉ"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "úÁ˦ÎÞÅÎÏ"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "úͦÎÉÔÉ"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ñËÉÊ ÔÉÐ ×É ÈÏÞÅÔÅ ÄÏÄÁÔÉ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "ì¦ÎÁËÓ"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "¶ÎÛ¦ ÓÉÓÔÅÍÉ (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "ïÂÒÁÚ"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "ðÒɤÄÎÁÔÉ"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "úÁÐÉÓ/ÞÉÔÁÎÎÑ"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "ôÁÂÌÉÃÑ"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "îÅÂÅÚÐÅÞÎÏ"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "åÔÉËÅÔËÁ"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "ïÓÎÏ×ÎÁ"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "òÏÚÍ¦Ò Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "âÅÚ÷¦ÄÅÏ"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "óÔÅÒÔÉ ÐÕÎËÔ"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "îÅ ÄÏÚ×ÏÌÑÀÔØÓÑ ÐÕÓÔ¦ ÅÔÉËÅÔËÉ"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ Ó×ÏÐ "
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "ãÑ ÅÔÉËÅÔËÁ ×ÖÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "úÎÁÊÄÅΦ ¦ÎÔÅÒÆÅÊÓÉ %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "þÉ ×É ÍÁ¤ÔÅ ¦ÎÛ¦?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "þÉ ×É ÍÁ¤ÔÅ ÂÕÄØ-Ñ˦ %s ¦ÎÔÅÒÆÅÊÓÉ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "î¦"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "ôÁË"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "ðÅÒÅÇÌÑÎØÔÅ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÄÒÁÊ×ÅÒ ÄÌÑ %s ÐÌÁÔÉ %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(ÍÏÄÕÌØ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ñËÉÊ ÄÒÁÊ×ÅÒ %s ÍÅΦ ÓÐÒÏÂÕ×ÁÔÉ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"÷ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÄÒÁÊ×ÅÒ %s ×ÉÍÁÇÁ¤ ÄÏÄÁÔËÏ×ϧ ¦ÎÆÏÒÍÁæ§ ÄÌÑ ÔÏÇÏ,\n"
-"ÝÏ צÒÎÏ ÐÒÁÃÀ×ÁÔÉ, ÈÏÞÁ Ú×ÉÞÁÊÎÏ ÐÒÁÃÀ¤ ÎÏÒÍÁÌØÎÏ ÂÅÚ Îŧ. þÉ ÎÅ\n"
-"ÈÏÔ¦ÌÉ Â ×É ×ËÁÚÁÔÉ ÄÏÄÁÔËÏצ ÏÐæ§ ÄÌÑ ÎØÏÇÏ ÞÉ ÄÏÚ×ÏÌÉÔÉ ÄÒÁÊ×ÅÒÕ\n"
-"×ÉÐÒÏÂÕ×ÁÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ, ÝÏ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÕ ¦ÎÆÏÒÍÁæÀ? ¶ÎËÏÌÉ ÔÁËÅ\n"
-"×ÉÐÒÏÂÏ×Õ×ÁÎÎÑ ÍÏÖÅ ÐÒÉ×ÅÓÔÉ ÄÏ ÚÁ×ÉÓÁÎÎÑ ËÏÍÐ'ÀÔÅÒÁ, ÁÌÅ ÎÅ ÐÏ×ÉÎÎÏ\n"
-"ΦÑË ÚÁÛËÏÄÉÔÉ ÊÏÍÕ."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "á×ÔÏÔÅÓÔ"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "÷ËÁÖ¦ÔØ ÏÐæ§"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"×É ÍÏÖÅÔÅ ÔÅÐÅÒ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÊÏÇÏ ÏÐæ§ × ÍÏÄÕ̦ %s.\n"
-"ïÐæ§ ÍÁÀÔØ ÆÏÒÍÁÔ ``ÎÁÚ×Á=×ÅÌÉÞÉÎÁ ÎÁÚ×Á2=×ÅÌÉÞÉÎÁ2 ...''.\n"
-"îÁÐÒÉËÌÁÄ, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"úÁ×ÁÎÔÁÖÅÎÎÑ ÍÏÄÕÌÑ %s ÎÅÕÓЦÛÎÅ.\n"
-"èÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ¦ÎÛ¦ ÐÁÒÁÍÅÔÒÉ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(×ÖÅ ÓÔ×ÏÒÅÎÉÊ %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "ðÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "äÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ ÐÏ×ÉÎÎÏ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú ÍÁÌÉÈ ÌÁÔÉÎÓØËÉÈ Ì¦ÔÅÒ,\n"
-"ÞÉÓÅÌ, `-' ÔÁ `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "ãÅ ¦Í'Ñ ×ÖÅ ÚÁÊÎÑÔÅ"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"÷×ÅĦÔØ ËÏÒÉÓÔÕ×ÁÞÁ\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "ðÏ×ÎÅ ¦Í'Ñ"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "ëÏÍÁÎÄÎÁ ÏÂÏÌÏÎËÁ"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "ð¦ËÔÏÇÒÁÍÁ"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "á×ÔÏÒŤÓÔÒÁæÑ"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"ñ ÍÏÖÕ ÎÁÓÔÒϧÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ÔÁË, ÝÏ X ÂÕÄÅ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ЦÓÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"þÉ ×É ÂÁÖÁ¤ÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ Ã¦¤À ÍÏÖÌÉצÓÔÀ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "÷ÉÂÅÒ¦ÔØ ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "÷ÉÂÅÒ¦ÔØ ÍÅÎÅÄÖÅÒ ×¦ËÏÎ, ÑËÉÍ ×É ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "÷ÓÅ"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "óÐÅæÁÌØÎÉÊ"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "óÔÁÒÔÕ¤ CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "ñ˦ ÐÁËÅÔÉ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "÷¦ÄͦÎÉÔÉ"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "úÌÏÍÝÉËÉ! ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ!"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "äÕÖÅ ÎÉÚØËÉÊ"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "óÔÁÎÄÁÒÔÎÉÊ"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "÷ÉÓÏËÉÊ"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "÷ÉÓÏËÉÊ"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "ðÁÒÁÎϦÄÁÌØÎÉÊ"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"ãÅÊ Ò¦×ÅÎØ ÐÏÔÒ¦ÂÎÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ú ÏÂÅÒÅÖΦÓÔÀ. ÷¦Î ÄÏÚ×ÏÌѤ ¦ÌØÛ\n"
-"ÐÒÏÓÔÅ ËÏÒÉÓÔÕ×ÁÎÎÑ ÷ÁÛÏÀ ÓÉÓÔÅÍÏÀ, ÁÌÅ ¤ ÎÁÄÚ×ÉÞÁÊÎÏ ÎÅÎÁĦÊÎÉÍ. îÅ\n"
-"ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÔÁËÏÀ ÓÉÓÔÅÍÏÀ, ËÏÌÉ ×ÏÎÁ ЦÄ'¤ÄÎÁÎÁ ÍÅÒÅÖÅÀ ÄÏ\n"
-"¦ÎÛÉÈ ÓÉÓÔÅÍ, ÁÂÏ ÄÏ ¦ÎÔÅÒÎÅÔÕ. ðÁÒÏ̦ ÎÅ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ × Ã¦Ê\n"
-"ÓÉÓÔÅͦ."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"ðÁÒÏ̦ ÔÅÐÅÒ ×ÍÉËÎÅΦ, ÁÌÅ ×ÓÅ ÏÄÎÏ ÎÅ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÃÉÍ ËÏÍÐ'ÀÔÅÒÏÍ × ÍÅÒÅÖ¦."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"ãÅ - ÓÔÁÎÄÁÒÔÎÉÊ Ò¦×ÅÎØ ÂÅÚÐÅËÉ, ÑËÉÊ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ ÍÁÔÉ ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒ¦, ЦÄËÌÀÞÅÎÏÍÕ ÄÏ ¦ÎÔÅÒÎÅÔÕ × ÑËÏÓÔ¦ Ë̦¤ÎÔÁ. ðÅÒÅצÒËÉ\n"
-"ÂÅÚÐÅËÉ ÔÅÐÅÒ ×ÍÉËÎÅΦ."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"îÁ ÃØÏÍÕ Ò¦×Φ ÂÅÚÐÅËÉ ÓÉÓÔÅÍÕ ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ × ÑËÏÓÔ¦ ÓÅÒ×ÅÒÁ.\n"
-"ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÌÑ Ã¦¤§ ÓÉÓÔÅÍÉ ÔÅÐÅÒ ÄÏÓÔÁÔÎ¦Ê ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ §§ ÑË ÓÅÒ×ÅÒ, ÝÏ ÄÏÐÕÓËÁ¤ ЦÄ'¤ÄÎÁÎÎÑ ÄÏ ÎØÏÇÏ\n"
-"ÂÁÇÁÔØÏÈ Ë̦¤ÎÔ¦×."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"íÉ ×ÍÉËÁ¤ÍÏ 4 Ò¦×ÅÎØ ÂÅÚÐÅËÉ, ÁÌÅ ÔÅÐÅÒ ÓÉÓÔÅÍÁ ¤ ÐÏ×ΦÓÔÀ ÚÁËÒÉÔÏÀ.\n"
-"÷Ó¦ ÒÅÖÉÍÉ ÂÅÚÐÅËÉ ÔÅÐÅÒ ÎÁ ÎÁÊ×ÉÝÏÍÕ Ò¦×Φ."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "÷ÉÂÅÒ¦ÔØ Ò¦×ÅÎØ ÚÁÈÉÓÔÕ"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÓÅÒ×ÅÒÁ"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Laskavo prosymo do %s - peremykacha operaciynih system!\n"
-"\n"
-"Vyberit' odnu z operaciynikh system v spysku abo pochekajte %d sekund\n"
-"poki pochne vantazhytysja persha z inh.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Laskavo prosymo do prohramy vyboru operacijnoyi systemy GRUB!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Dlja vyboru pidsvichenogo punktu korystujtesja klavishamy %c ta %c."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Natysnit' enter shchob zavantazhyty vibranu systemu, 'e' shchob redaguvaty"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"komandy pered zavantazhennjam, ta 'c' dlja perehodu v komandnyj rezhim."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is then suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Pidsvichena systema zavantazhyt'sja avtomatichno cherez %d sekund."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "ÎÅÄÏÓÔÁÔÎØÏ Í¦ÓÃÑ × /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "òÏÂÏÞÉÊ ÓÔ¦Ì"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "óÔÁÒÔÏ×Å ÍÅÎÀ"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÒÔÏ×ÉÊ ÂÌÏË?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ЦÄËÁÚËÁ ÝÅ ÎÅ ÚÒÏÂÌÅÎÁ.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÓÔÉÌÀ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_æÁÊÌ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/æÁÊÌ/_÷ÉȦÄ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "ëÁÔÅÇÏÒ¦Ñ ÍÏΦÔÏÒÁ ÎÏ×ÏÇÏ ÓÔÉÌÀ"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "íÏΦÔÏÒ ÎÏ×ÏÇÏ ÔÉÐÕ"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ú×ÉÞÁÊÎÉÊ ÍÏΦÔÏÒ"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ôÒÁÄÉæÊÎÉÊ ÍÏΦÔÏÒ Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "÷ÍÉËÁÔÉ á×ÒÏÒÕ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "òÅÖÉÍ Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "òÅÖÉÍ Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"×É ËÏÒÉÓÔÕ¤ÔÅÓØ ÚÁ×ÁÎÔÁÖÕ×ÁÞÅÍ ÓÉÓÔÅÍ %s.\n"
-"ëÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\" ÝÏ ÓÔÁÒÔÕ×ÁÔÉ ÐÏͦÞÎÉË ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "îÁÓÔÒϧÔÉ"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "úÁÐÕÓËÁÔÉ ×¦ËÎÏ X-Window ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "î¦, ÍÅΦ ÎÅ ÐÏÔÒ¦ÂÎÁ Á×ÔÏÍÁÔÉÞÎÁ ÒŤÓÔÒÁæÑ"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"ôÁË, Ñ ÈÏÞÕ Á×ÔÏÍÁÔÉÞÎÏ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ Ú ÃÉÍ (¦ÍÅÎÅÍ, ÓÅÒÅÄÏ×ÉÝÅÍ)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "çÁÒÁÚÄ"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÎÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ /etc/inittab ÎÁ ÐÒÏÞÉÔÁÎÎÑ: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "½Â"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "ËÂ"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "íÂ"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "ôÂ"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d È×ÉÌÉÎ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 È×ÉÌÉÎÁ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ÓÅËÕÎÄ"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÔÁËÏÖ ¦ÎÛ¦ ÍÏ×É, Ñ˦ ÂÕÄÕÔØ ÄÏÓÔÕÐΦ × ÓÉÓÔÅͦ ЦÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "æÒÁÎæÑ"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "âÅÌØǦÊÓØËÁ"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "î¦ÍÅÞÞÉÎÁ"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "çÒÅÃØËÁ"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "îÏÒ×ÅÚØËÁ"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "äÉ×ÉÓØ"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "¶ÔÁ̦ÊÓØËÁ"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÔ×ÏÒ¦ÔØ ÓÐÏÞÁÔËÕ ÒÅÚÅÒÎÕ ËÏЦÀ ÷ÁÛÉÈ ÄÁÎÉÈ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "þÉÔÁÊÔÅ Õ×ÁÖÎÏ!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"ñËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ aboot, ÎÅ ÚÁÂÕÄØÔÅ ÚÁÌÉÛÉÔÉ ×¦ÌØÎÉÊ\n"
-"ÒÏÚÄ¦Ì (ÄÏÓÔÁÔÎØÏ 2048 ÓÅËÔÏÒ¦×) ÎÁ ÐÏÞÁÔËÕ ÄÉÓËÕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "ðÏÍÉÌËÁ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "ðÏͦÞÎÉË"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "÷ÉÂÅÒ¦ÔØ Ä¦À"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"×É ÍÁ¤ÔÅ ÏÄÉÎ ×ÅÌÉËÉÊ ÄÉÓËÏ×ÉÊ \n"
-"ЦÄÒÏÚÄ¦Ì ÔÉÐÕ FAT (ÑËÉÊ × ÏÓÎÏ×ÎÏÍÕ\n"
-"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÓÉÓÔÅÍÁÍÉ MicroSoft \n"
-"Dos/Windows).  òÅËÏÍÅÎÄÏ×ÁÎÏ ÓÐÅÒÛÕ \n"
-"ÚÍÅÎÛÉÔÉ ÒÏÚÍ¦Ò ÃØÏÇÏ ÒÏÚĦÌÕ (ËÌÁÃΦÔØ \n"
-"ÎÁ ÎØÏÍÕ, ¦ ÐÏÔ¦Í ËÌÁÃΦÔØ ÎÁ \"úͦÎÉÔÉ ÒÏÚͦÒ\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "ðÏÄÒÏÂÉæ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "öÕÒÎÁÌØÎÁ ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "ðÕÓÔÏ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "¶ÎÛ¦"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "ôÉÐÉ ÆÁÊÌÏ×ÉÈ ÓÉÓÔÅÍ:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "óÔ×ÏÒÉÔÉ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "ôÉÐ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "úÁͦÓÔØ ÃØÏÇÏ ÓËÏÒÉÓÔÁÊÔÅÓÑ ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "óÔÅÒÔÉ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "óÐÏÞÁÔËÕ ÓËÏÒÉÓÔÕÊÔÅÓÑ ``òÏÚÍÏÎÔÕ×ÁÔÉ''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"ð¦ÓÌÑ ÚͦÎÉ ÔÉÐÕ Ð¦ÄÒÏÚĦÌÕ ÄÉÓËÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ \n"
-"ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "óÔ×ÏÒÉÔÉ ¦ÎÛÉÊ Ð¦ÄÒÏÚĦÌ"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "÷ÉȦÄ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "ú×ÉÞÁÊÎÉÊ > åËÓÐÅÒÔ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "åËÓÐÅÒÔ > ú×ÉÞÁÊÎÉÊ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "îÁÚÁÄ"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "÷ÉÊÔÉ ÂÅÚ ÚÁÐÉÓÕ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "÷ÉÊÔÉ ÂÅÚ ÚÁÐÉÓÕ ÔÁÂÌÉæ ЦÄÒÏÚĦ̦×?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ËÏÎƦ­ÕÒÁæÀ /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "á×ÔÏÍÁÔÉÞÎÏ ÒÏÚÐÏĦÌÉÔÉ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "ïÞÉÓÔÉÔÉ ×ÓÅ"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "¶ÎÆÏÒÍÁÃ¦Ñ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "÷Ó¦ ÏÓÎÏ×Φ ЦÄÒÏÚĦÌÉ ÚÁÊÎÑÔ¦"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"ýÏ ÍÁÔÉ Â¦ÌØÛŠЦÄÒÏÚĦ̦×, Ú¦ÔÒ¦ÔØ ÏÄÉÎ ¦Ú ÔÉÈ, ÝÏ ¤. ð¦ÓÌÑ ÃØÏÇÏ\n"
-"×É ÍÏÖÅÔÅ ÓÔ×ÏÒÉÔÉ ÚÁͦÓÔØ ÎØÏÇÏ Ë¦ÌØËÁ ÒÏÚÛÉÒÅÎÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "úÁÐÉÓÁÔÉ  ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "á×ÁÒ¦ÊÎÁ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "ðÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "á×ÔÏÍÁÔÉÞÎÅ ÍÏÎÔÕ×ÁÎÎÑ ÚͦÎÎÉÈ ÎÏÓ¦§×"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"á×ÁÒ¦ÊÎÁ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÍÁ¤ ¦ÎÛÉÊ ÒÏÚͦÒ\n"
-"ðÒÏÄÏ×ÖÕ×ÁÔÉ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "ðÏÐÅÒÅÄÖÅÎÎÑ"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏצÄ\n"
-"÷Ó¦ ÄÁΦ ÎÁ Ã¦Ê ÄÉÓËÅÔ¦ ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "ðÒÏÂÕÀ צÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "äÅÔÁÌØÎÁ ¦ÎÆÏÒÍÁæÑ"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "ðÁÒÁÍÅÔÒÉ"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "úͦÎÉÔÉ ÒÏÚͦÒ"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "ðÅÒÅͦÓÔÉÔÉ"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "íÏÎÔÕ×ÁÔÉ"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "äÏÄÁÔÉ ÄÏ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "äÏÄÁÔÉ ÄÏ LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "òÏÚÍÏÎÔÕ×ÁÔÉ"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "÷ÉÄÁÌÉÔÉ Ú RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "÷ÉÄÁÌÉÔÉ Ú LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "úͦÎÉÔÉ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "óÔ×ÏÒÉÔÉ ÎÏ×ÉÊ ÒÏÚĦÌ"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "ðÏÞÁÔÏË (ÓÅËÔÏÒ): "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "òÏÚÍ¦Ò (íÂ): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "ôÉРЦÄÒÏÚĦÌÕ: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "õÓÔÁÎÏ×ËÉ: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "óÔÅÒÔÉÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "úͦÎÉÔÉ ÔÉРЦÄÒÏÚĦÌÕ"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "ñËÕ ÆÁÊÌÏ×Õ ÓÉÓÔÅÍÕ ×É ×ÉÂÉÒÁ¤ÔÅ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ðÅÒÅÍÉËÁÀÓØ Ú ext2 ÎÁ ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÆÁÊÌ Ú×ÏÒÏÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "äÅ ×É ÈÏÞÅÔÅ ÚÍÏÎÔÕ×ÁÔÉ ÐÒÉÓÔÒ¦Ê %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"îÅ ÍÏÖÕ ÚͦÎÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ ÄÁÎÏÇÏ ÒÏÚĦÌÕ, ÏÓ˦ÌØËÉ ×¦Î\n"
-"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ. óÐÏÞÁÔËÕ ×¦ÄͦΦÔØ\n"
-"Ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "ïÂÞÉÓÌÀÀ ÍÅÖ¦ ЦÄÒÏÚĦÌÕ FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "úͦÎÀÀ ÒÏÚͦÒ"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "òÏÚÍ¦Ò ÃØÏÇÏ Ð¦ÄÒÏÚĦÌÕ ÎÅÍÏÖÌÉ×Ï ÚͦÎÉÔÉ"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "ðÏÔÒ¦ÂÎÏ ÚÂÅÒÅÇÔÉ ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ð¦ÓÌÑ ÚͦÎÉ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ ÂÕÄÕÔØ\n"
-"×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "÷ÉÂÅÒ¦ÔØ ÎÏ×ÉÊ ÒÏÚͦÒ"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "îÏ×ÉÊ ÒÏÚÍ¦Ò (íÂ): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "îÁ ÑËÉÊ ÄÉÓË ×É ÈÏÞÅÔÅ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "óÅËÔÏÒ"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "îÁ ÑËÉÊ ÓÅËÔÏÒ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "ðÅÒÅͦÝÅÎÎÑ"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "ðÅÒÅͦÝÁÀ ЦÄÒÏÚĦÌ..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÓÎÕÀÞÉÊ RAID, ÄÏ ÑËÏÇÏ ÄÏÄÁÔÉ"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ÎÏ×ÉÊ"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÓÎÕÀÞÉÊ LVM, ÄÏ ÑËÏÇÏ ÄÏÄÁÔÉ"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "îÁÚ×Á LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "ãÅÊ Ð¦ÄÒÏÚÄ¦Ì ÎÅ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "îÁÚ×Á ÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "äÁÊÔÅ ÎÁÚ×Õ ÆÁÊÌÕ"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"¶ÎÛÉÊ ÐÒÉÓÔÒ¦Ê Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ ×ÖÅ ËÏÒÉÓÔÕ¤ÔØÓÑ ÃÉÍ\n"
-"ÆÁÊÌÏÍ. ÷ÉÂÅÒ¦ÔØ ¦ÎÛÉÊ."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "æÁÊÌ ×ÖÅ ¦ÓÎÕ¤. ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÉÍ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "ðÁÒÁÍÅÔÒÉ ÍÏÎÔÕ×ÁÎÎÑ:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "ò¦ÚÎÏÍÁΦÔÎÅ"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ÐÒÉÓÔÒ¦Ê"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "Ò¦×ÅÎØ"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ÒÏÚÍ¦Ò Ä¦ÌÑÎËÉ"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "ïÂÅÒÅÖÎÏ: ÃÑ ÏÐÅÒÁÃ¦Ñ ÎÅÂÅÚÐÅÞÎÁ."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "ôÉРЦÄÒÏÚĦ̦×?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"ñ ÎÅ ÍÏÖÕ ÓÔ×ÏÒÉÔÉ /boot ÔÁË ×¦ÄÄÁÌÅÎÏ ÎÁ ÄÉÓËÕ (ÎÁ ÃÉ̦ÎÄÒ¦, ÎÏÍÅÒ\n"
-"ÑËÏÇÏ > 1024).\n"
-"áÂÏ ×É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ LILO ¦ צΠÎÅ ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ, ÁÂÏ ×É ÎÅ\n"
-"ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ LILO, ÔÏĦ ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÁ ÄÉÒÅËÔÏÒ¦Ñ /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"ð¦ÄÒÏÚĦÌ, ÑËÉÊ ×É ×ÉÂÒÁÌÉ ÝÏ ÄÏÄÁÔÉ ÑË ËÏÒÅÎÅ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (/)\n"
-"ƦÚÉÞÎÏ ÒÏÚÔÁÛÏ×ÁÎÉÊ ÐÏÚÁ 1024-Í ÃÉ̦ÎÄÒÏÍ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ.  ëÒ¦Í\n"
-"ÃØÏÇÏ ×É ÎÅ ÍÁ¤ÔÅ ×ÉĦÌÅÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ Ð¦Ä ÄÉÒÅËÔÏÒ¦À /boot.  ñËÝÏ ×É\n"
-"ÐÌÁÎÕ¤ÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ LILO, ÎÅ ÚÁÂÕÄØÔÅ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"÷ ÑËÏÓÔ¦ ЦÄÒÏÚĦÌÁ ÄÌÑ root (/) ×É ×ÉÂÒÁÌÉ ÐÒÏÇÒÁÍÎÉÊ RAID.\n"
-"úÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÎÅ ÍÖÏÕÔØ ÐÒÁÃÀ×ÁÔÉ Ú ÔÁËÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ ÂÅÚ Ð¦ÄÒÏÚĦÌÕ\n"
-"/boot. ôÏÖ, ÂÕÄØ-ÌÁÓËÁ, ÎÅ ÚÁÂÕÄØÔÅ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ôÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÉÓËÕ %s ÂÕÄÅ ÚÁÐÉÓÁÎÏ ÎÁ ÄÉÓË"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ýÏ ÚͦÎÉ ÐÏÞÁÌÉ Ä¦ÑÔÉ ÷ÁÍ ÓÌ¦Ä ÐÅÒÅ×ÁÎÔÁÖÉÔÉ ËÏÍÐ'ÀÔÅÒ"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s, ×Ó¦ ÄÁΦ ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ \n"
-"ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ ÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦÌÕ %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "ÚÂ¦Ê Õ mkraid"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "ðÒÉÓÔÒ¦Ê: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "ì¦ÔÅÒÁ × äïó¦: %s (ÐÒÉÐÕÝÅÎÎÑ)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "ôÉÐ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "îÁÚ×Á: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "ðÏÞÁÔÏË: ÓÅËÔÏÒ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "òÏÚͦÒ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ÓÅËÔÏÒ¦×"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "÷¦Ä ÃÉ̦ÎÄÒÕ %d ÄÏ ÃÉ̦ÎÄÒÕ %d \n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "æÏÒÍÁÔÏ×ÁÎÉÊ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "îÅ ÆÏÒÍÁÔÏ×ÁÎÉÊ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "úÍÏÎÔÏ×ÁÎÉÊ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"æÁÊÌ(É) Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: \n"
-"  %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"ð¦ÄÒÏÚĦÌ, ÑËÉÊ ÂÕÄÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ\n"
-"     (ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ äïóÕ, ÎÅ ÄÌÑ lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "ò¦×ÅÎØ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "òÏÚÍ¦Ò Ä¦ÌÑÎËÉ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "äÉÓËÉ RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "îÁÚ×É ÆÁÊÌ¦× Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"íÏÖÌÉ×Ï ÃÅÊ Ð¦ÄÒÏÚÄ¦Ì ¤ ЦÄÒÏÚĦÌÏÍ\n"
-"ÄÒÁÊ×ÅÒÁ, ×ÁÍ ÍÁÂÕÔØ ÎÅ ÐÏÔÒ¦ÂÎÏ\n"
-"ÊÏÇÏ ÚͦÎÀ×ÁÔÉ.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ãÅ ÓÐÅæÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ \n"
-"ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÄצÊÎÏÇÏ \n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "òÏÚͦÒ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "çÅÏÍÅÔÒ¦Ñ: %s ÃÉ̦ÎÄÒ¦×, %s ÇÏÌÏ×ÏË, %s ÓÅËÔÏÒ¦×\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "¶ÎÆÏÒÍÁæÑ: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "äÉÓËÉ LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ôÉÐ ÔÁÂÌÉæ ЦÄÒÏÚĦ̦×: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ÎÁ ÛÉΦ %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "ðÁÒÁÍÅÔÒÉ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "ôÉРЦÄÒÏÚĦÌÕ: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"ãÅÊ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ (צΠÐÏ×ÉÎÅÎ ÂÕÔÉ ÈÏÞÁ  %d ̦ÔÅÒ ÚÁ×ÄÏ×ÖËÉ)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "ðÁÒÏ̦ Ò¦ÚΦ"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "úͦÎÉÔÉ ÔÉÐ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "óÅÒ×ÅÒ DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ÆÏÒÍÁÔÕ×ÁÎÎÑ %s ×ÔÒÁÞÅÎÏ"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "îÅ ÚÎÁÀ ÑË ÆÏÒÍÁÔÕ×ÁÔÉ  %s ÔÉÐÕ  %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fcsk ÚÁ˦ÎÞÉÌÁÓØ Ú ËÏÄÏÍ ÐÏÍÉÌËÉ %d ÞÉ ÓÉÇÎÁÌÏÍ %d "
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ÐÏÍÉÌËÁ ÒÏÚÍÏÎÔÕ×ÁÎÎÑ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "ÐÒÏÓÔÉÊ"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ÓÅÒ×ÅÒ"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÁ ЦÄÒÏÚĦÌÁÈ ÒÏÚͦÒÏÍ ÍÅÎÛÅ 16íÂ."
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÎÁ ЦÄÒÏÚĦÌÁÈ ÒÏÚͦÒÏÍ ÍÅÎÛÅ 32íÂ."
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ ÐÏ×ÉÎÎÁ ÐÏÞÉÎÁÔÉÓÑ Ú /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "÷ÖÅ ¤ ЦÄÒÏÚÄ¦Ì Ú ÔÏÞËÏÀ ÍÏÎÔÕ×ÁÎÎÑ %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "äÌÑ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÌÏǦÞÎÉÍ ÔÏÍÏÍ LVM"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "ãÅÊ ËÁÔÁÌÏÇ ÍÁ¤ ÚÎÁÈÏÄÉÔÉÓØ ÎÁ ËÏÒÅÎÅ×¦Ê ÆÁÊÌÏ×¦Ê ÓÉÓÔÅͦ"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"äÌÑ Ã¦¤§ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÓÐÒÁ×ÖÎÑ ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ (ext2,\n"
-"reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "äÌÑ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s ÎÅ ÍÏÖÎÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÌÏǦÞÎÉÍ ÔÏÍÏÍ LVM"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ Á×ÔÏÍÁÔÉÞÎÏÇÏ ÐÏĦÌÕ"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s ÎÁ ÚÁÐÉÓ: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"óÔÁÌÁÓÑ ÐÏÍÉÌËÁ - ÎÅ ÚÎÁÊÄÅÎÏ ×¦ÄÐÏצÄÎÉÈ ÄÉÓË¦× ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÎÏ×ÉÈÆÁÊÌÏ×ÉÈ "
-"ÓÉÓÔÅÍ. ðÅÒÅצÒÔÅ ÂÕÄØ-ÌÁÓËÁ Ó×ÏÀ ÓÉÓÔÅÍÕ ¦ ÓÐÒÏÂÕÊÔÅצÄÛÕËÁÔÉ ÐÒÉÞÉÎÕ ÃØÏÇÏ."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "õ ÷ÁÓ ÎÅÍÁ¤ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux - ÂÁÇÁÔÏËÏÒÉÓÔÕ×ÁÃØËÁ ÓÉÓÔÅÍÁ, ¦ ÃÅ ÏÚÎÁÞÁ¤, ÝÏ ËÏÖÅÎ Ú\n"
-"ËÏÒÉÓÔÕ×ÁÞ¦× ÍÏÖÅ ÍÁÔÉ Ó×ϧ ×ÌÁÓΦ ÕÓÔÁÎÏ×ËÉ, ×ÌÁÓΦ ÆÁÊÌÉ, ÔÏÝÏ. ýÏÂ\n"
-"¦ÌØÛŠĦÚÎÁÔÉÓÑ ÐÒÏ ÃÅ ÷É ÍÏÖÅÔÅ ÐÒÏÞÉÔÁÔÉ ð¦ÄÒÕÞÎÉË ËÏÒÉÓÔÕ×ÁÞÁ Ú\n"
-"ÓÉÓÔÅÍÉ. áÌÅ ÎÁ צÄͦÎÕ ×¦Ä ËÏÒÉÓÔÕ×ÁÞÁ Root, ÑËÉÊ ¤ ÁÄͦΦÓÔÒÁÔÏÒÏÍ\n"
-"ÓÉÓÔÅÍÉ, ËÏÒÉÓÔÕ×ÁÞ¦, ÑËÉÈ ÷É ÂÕÄÅÔÅ ÓÔ×ÏÒÀ×ÁÔÉ ÎÁ ÃØÏÍÕ ËÒÏæ, ÎÅ\n"
-"ÍÁÀÔØ ÐÒÁ×Á ÚͦÎÀ×ÁÔÉ Î¦ÞÏÇÏ × ÓÉÓÔÅͦ ËÒ¦Í Ó×Ï§È ×ÌÁÓÎÉÈ ÆÁÊÌ¦× ¦\n"
-"×ÌÁÓÎϧ ËÏÎƦ­ÕÒÁæ§. ÷É ÍÁ¤ÔÅ ÓÔ×ÏÒÉÔÉ ÒÁÈÕÎÏË ÄÌÑ ÈÏÞÁ  ÏÄÎÏÇÏ\n"
-"¤ÄÉÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ - ÄÌÑ ÓÁÍÏÇÏ ÓÅÂÅ. ÷É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ\n"
-"ÒÁÈÕÎËÏÍ ÄÌÑ ÔÏÇÏ, ÝÏ ×ÉËÏÎÕ×ÁÔÉ ÝÏÄÅÎΦ ÚÁÄÁÞ¦. ¶ ÈÏÞÁ ÃÅ ¦ ÄÕÖÅ\n"
-"ÚÒÕÞÎÏ ÒŤÓÔÒÕ×ÁÔÉÓØ × ÓÉÓÔÅͦ ÑË Root, ÁÌÅ ÏÄÎÏÞÁÓÎÏ ÃÅ ¦ ÄÕÖÅ\n"
-"ÎÅÂÅÚÐÅÞÎÏ! îÁÊÍÅÎÛÁ ÐÏÍÉÌËÁ ÍÏÖÅ ÐÒÉÚ×ÅÓÔÉ ÄÏ ÔÏÇÏ, ÝÏ ÓÉÓÔÅÍÁ ÂÕÄÅ\n"
-"ÎÅÒÏÂÏÞÏÀ. ñËÝÏ ÷É ÐÏÍÉÌÉÔÅÓØ ÑË Ú×ÉÞÁÊÎÉÊ ËÏÒÉÓÔÕ×ÁÞ, ÷É ÍÏÖÅÔÅ,\n"
-"Ú×ÉÞÁÊÎÏ, ×ÔÒÁÔÉÔÉ ÄÅÑ˦ Ó×ϧ ÄÁΦ, ÁÌÅ ÎÅ ×ÓÀ ÓÉÓÔÅÍÕ.\n"
-"\n"
-"óÐÏÞÁÔËÕ ÎÁÄÒÕËÕÊÔÅ Ó×Ϥ ÐÏ×ÎÅ ¦Í'Ñ. ãÅ ÎÅ ÏÂÏ×'ÑÚËÏ×Ï, ÷É ÍÏÖÅÔÅ\n"
-"ÎÁÄÒÕËÕ×ÁÔÉ ×ÓÅ, ÝÏ ÚÁ×ÇÏÄÎÏ. drakx ÐÏÔ¦Í ×¦ÚØÍÅ ÐÅÒÛÅ ÓÌÏ×Ï ¦\n"
-"×ÉËÏÒÉÓÔÁ¤ ÊÏÇÏ ÑË ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ. ãÅ - ¦Í'Ñ Ð¦Ä ÑËÉÍ ËÏÒÉÓÔÕ×ÁÞ\n"
-"ÂÕÄÅ ÒŤÓÔÒÕ×ÁÔÉÓØ Õ ÓÉÓÔÅͦ. ÷É ÍÏÖÅÔÅ ÚͦÎÉÔÉ ÃÅ ¦Í'Ñ. ðÏÔ¦Í ÷É\n"
-"ÍÁ¤ÔÅ ××ÅÓÔÉ ÐÁÒÏÌØ. ðÁÒÏÌØ Ú×ÉÞÁÊÎÏÇÏ (ÎÅ root) ËÏÒÉÓÔÕ×ÁÞÁ ÎÅ ÔÁËÁ\n"
-"ËÒÉÔÉÞÎÁ Ò¦Þ, ÑË ÐÁÒÏÌØ ÁÄͦΦÓÔÒÁÔÏÒÁ, ÁÌÅ ×ÓÅ-ÏÄÎÏ ÎÅÍÁ¤ ÐÒÉÞÉÎ ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ÎÅÈÔÕ×ÁÔÉ ÎÉÍ. ÷ÒÅÛÔ¦-ÒÅÛÔ, ÃÅ ÚÁÇÒÏÖÕ¤ ÷ÁÛÉÍ ×ÌÁÓÎÉÍ\n"
-"ÆÁÊÌÁÍ. \n"
-"\n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ ðÒÉÊÎÑÔÉ ËÏÒÉÓÔÕ×ÁÞÁ, ÷É ÍÏÖÅÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ ÝÅ ÂÁÇÁÔÏ ¦ÎÛÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×. óÔ×ÏÒ¦ÔØ ÒÁÈÕÎËÉ ÄÌÑ ËÏÖÎÏÇÏ Ú\n"
-"÷ÁÛÉÈ ÄÒÕÚ¦×, ÄÌÑ ÔÁÔÁ Ê ÓÅÓÔÒÉ, ÎÁÐÒÉËÌÁÄ. ð¦ÓÌÑ ÔÏÇÏ, ÑË ÓÔ×ÏÒÅÎÏ\n"
-"×Ó¦ ÐÏÔÒ¦ÂΦ ÒÁÈÕÎËÉ ËÏÒÉÓÔÕ×ÁÞ¦×, ÎÁÔÉÓΦÔØ ËÌÁצÛÕ úÁ˦ÎÞÅÎÏ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï, ÷É ÂÕÄÅÔÅ ÍÁÔÉ ÍÏÖÌÉצÓÔØ\n"
-"×ÓÔÁÎÏ×ÉÔÉ ËÏÍÁÎÄÎÕ ÏÂÏÌÏÎËÕ ÄÁÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ (ÎÅÑ×ÎÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
-"bash). "
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"÷ÉÝÅ ÐÅÒÅ̦ÞÅΦ ×ÖÅ ¦ÓÎÕÀÞ¦ ЦÄÒÏÚĦÌÉ, ÚÎÁÊÄÅΦ ÎÁ ÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ\n"
-"ÄÉÓËÕ. ÷É ÍÏÖÅÔÅ ÐÒÉÔÒÉÍÕ×ÁÔÉÓØ ËÏÎƦ­ÕÒÁæ§, ×ÓÔÁÎÏ×ÌÅÎϧ\n"
-"ÐÏͦÞÎÉËÏÍ. ãÑ ËÏÎƦ­ÕÒÁÃ¦Ñ Ð¦ÄÈÏÄÉÔØ ÄÌÑ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄ˦×\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ ÓÉÓÔÅÍÉ. ñËÝÏ ×É ×ÉÒ¦ÛÉÔÅ ÚͦÎÉÔÉ ÃÀ ËÏÎƦ­ÕÒÁæÀ, ÑË\n"
-"ͦΦÍÕÍ ÷É ÍÁ¤ÔÅ ×ÉÚÎÁÞÉÔÉ ËÏÒÅÎÅ×Õ ÆÁÊÌÏ×Õ ÓÉÓÔÅÍÕ (/). îÅ ×ÉĦÌÑÊÔÅ\n"
-"ÄÌÑ ÃØÏÇÏ ÚÁÎÁÄÔÏ ÍÁÌÉÊ Ð¦ÄÒÏÚĦÌ, ÂÏ ¦ÎÁËÛÅ ×É ÎÅ ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-"×ÓÅ ÐÏÔÒ¦ÂÎÅ ÐÒÏÇÒÁÍÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ. ñËÝÏ ×É ÂÁÖÁ¤ÔÅ ÚÂÅÒÅÇÔÉ ×Ó¦ Ó×ϧ\n"
-"ÄÁΦ ÎÁ ÏËÒÅÍÏÍÕ Ð¦ÄÒÏÚĦ̦, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ÔÁËÏÖ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌ\n"
-"ÄÌÑ \"/home\" (Ô¦ÌØËÉ × ÔÏÍÕ ×ÉÐÁÄËÕ, ÑËÝÏ ×É ÍÁ¤ÔŠ¦ÌØÛÅ ÏÄÎÏÇÏ\n"
-"ЦÄÒÏÚĦÌÁ ÄÌÑ ì¦ÎÁËÓÁ). \n"
-"\n"
-"ëÏÖÅΠЦÄÒÏÚÄ¦Ì ÐÏÄÁÎÉÊ × ÔÁËÏÍÕ ×ÉÇÌÑĦ: \"îÁÚ×Á\", \"ïÂ'¤Í\".\n"
-"\n"
-"îÁÚ×Á ÒÏÚÛÉÆÒÏ×Õ¤ÔØÓÑ ÔÁË: \"ÔÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\", \"ÎÏÍÅÒ ÖÏÒÓÔËÏÇÏ\n"
-"ÄÉÓËÕ\", \"ÎÏÍÅÒ Ð¦ÄÒÏÚĦÌÕ ÎÁ ÄÉÓËÕ\", (îÁÐÒÉËÌÁÄ: \"hda1\").\n"
-"\n"
-"\"ôÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\" - ÃÅ \"hd\", ÑËÝÏ ×É ÍÁ¤ÔÅ ÄÉÓË ÔÉÐÕ IDE, ¦ \"sd\",\n"
-"ÑËÝÏ ×É ÍÁ¤ÔÅ ÖÏÒÓÔËÉÊ ÄÉÓË ÔÉÐÕ SCSI.\n"
-"\n"
-"\"îÏÍÅÒ ÖÏÒÓËÏÇÏ ÄÉÓËÕ\" - ÃÅ ÚÁ×ÖÄÉ Ì¦ÔÅÒÁ ЦÓÌÑ \"hd\" ÞÉ \"sd\". äÌÑ\n"
-"ÄÉÓË¦× ÔÉÐÕ IDE ÃÅ:\n"
-"\n"
-"    * \"a\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË (master) ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"b\" - ×ÔÏÒÉÎÎÉÊ (slave) ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"c\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ  ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"d\" - ×ÔÏÒÉÎÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ  ËÏÎÔÒÏÌÅÒ¦ IDE.\n"
-"\n"
-"äÌÑ SCSI ÄÉÓË¦× \"a\" ÏÚÎÁÞÁ¤ \"ÇÏÌÏ×ÎÉÊ ÄÉÓË\", \"b\" - ÄÒÕÇÏÒÑÄÎÉÊ ÄÉÓË, "
-"¦\n"
-"Ô.Ä. ..."
-
-#: ../../help.pm_.c:72
-#, fuzzy
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"äÉÓÔÒÉÂÕÔÉ× íÁÎÄÒÅÊË ì¦ÎÁËÓ ÒÏÚͦÝÅÎÉÊ ÎÁ ˦ÌØËÏÈ\n"
-"ËÏÍÐÁËÔ-ÄÉÓËÁÈ. íÏÖÌÉ×Ï, drakX ×ÉÂÒÁ× ÐÁËÅÔÉ, ÝÏ ÚÎÁÈÏÄÑÔØÓÑ ÎÁ ¦ÎÛÉÈ\n"
-"ÄÉÓËÁÈ (צÄͦÎÎÉÈ ×¦Ä ÕÓÔÁÎÏ×ÏÞÎÏÇÏ). ëÏÌÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÂÕÄÅ ÐÏÔÒ¦ÂÅÎ\n"
-"¦ÎÛÉÊ ÄÉÓË, ÐÒÏÇÒÁÍÁ ×ÉÔÑÇÎÅ ÄÁÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË ¦ ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ\n"
-"ÐÏÔÒ¦ÂÎÉÊ.  "
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"ôÅÐÅÒ ÞÁÓ ×ÉÂÒÁÔÉ, Ñ˦ ÐÒÏÇÒÁÍÉ ÷É ÈÏÞÅÔÅ ÍÁÔÉ × Ó×ϧÊ\n"
-"ÓÉÓÔÅͦ. íÁÎÄÒÅÊË ì¦ÎÁËÓ ÍÁ¤ ÔÉÓÑÞ¦ ÐÒÏÇÒÁÍÎÉÈ ÐÁËÅÔ¦×, ¦ ÷ÁÍ ÎÅÍÁ¤\n"
-"ÎÅÏÂȦÄÎÏÓÔ¦ ÚÎÁÔÉ §È ×Ó¦. \n"
-"\n"
-"ñËÝÏ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ ¦Ú ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÍÐÁËÔ-ÄÉÓËÕ, ÷ÁÍ\n"
-"ÓÐÏÞÁÔËÕ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, Ñ˦ ÄÉÓËÉ ÷É ÍÁ¤ÔÅ. ðÅÒÅצÒÔÅ Ó×ϧ\n"
-"ËÏÍÐÁËÔ-ÄÉÓËÉ, צÄͦÔØÔŠצÄÐÏצÄΦ ÐÕÎËÔÉ ÎÁ ÅËÒÁΦ ¦ ÎÁÔÉÓΦÔØ\n"
-"çÁÒÁÚÄ.\n"
-"\n"
-"ðÁËÅÔÉ Ú¦ÂÒÁΦ Õ ÇÒÕÐÉ ÐÁËÅÔ¦×, צÄÐÏצÄÎÏ ÄÏ ËÏÎËÒÅÔÎÏÇÏ ×ÖÉÔËÕ ÄÌÑ\n"
-"ÍÁÛÉÎÉ.\n"
-"\n"
-"çÒÕÐÉ ÐÁËÅÔ¦× ÒÏÚĦÌÅΦ ÎÁ ÞÏÔÉÒÉ ×ÅÌÉ˦ ÒÏÚĦÌÉ:\n"
-"\n"
-"* òÏÂÏÞÁ ÓÔÁÎæÑ: ÑËÝÏ ÷ÁÛÁ ÍÁÛÉÎÁ ÂÕÄÅ ×ÖÉ×ÁÔÉÓÑ ÑË ÒÏÂÏÞÁ ÓÔÁÎæÑ,\n"
-"×ÉÂÅÒ¦ÔØ ÏÄÎÕ ÞÉ Ë¦ÌØËÁ צÄÐÏצÄÎÉÈ ÇÒÕÐ.\n"
-"\n"
-"* çÒÁƦÞΦ ÓÅÒÅÄÏ×ÉÝÁ: ÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ ÓϦ ÄÏ\n"
-"×ÐÏÄÏÂÉ. ÷ÉÂÅÒ¦ÔØ ÈÏÞÁ  ÏÄÎÅ, ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÖÉ×ÁÔÉ ÍÁÛÉÎÕ ÑË ÒÏÂÏÞÕ\n"
-"ÓÔÁÎæÀ.\n"
-"\n"
-"* òÏÚÒÏÂËÁ: ×ÉÂÅÒ¦ÔØ ×¦ÄÐÏצÄΦ ÇÒÕÐÉ, ÑËÝÏ ÃÑ ÍÁÛÉÎÁ ÂÕÄÅ ×ÖÉ×ÁÔÉÓÑ\n"
-"ÄÌÑ ÐÒÏÇÒÁÍÕ×ÁÎÎÑ.\n"
-"\n"
-"* óÅÒ×ÅÒ: ÎÁÒÅÛÔ¦, ÑËÝÏ ÍÁÛÉÎÁ ÂÕÄÕ¤ÔØÓÑ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ × ÑËÏÓÔ¦\n"
-"ÓÅÒ×ÅÒÁ, ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÎÁʦÌØÛ ÒÏÚÐÏ×ÓÀÄÖÅΦ ÓÅÒצÓÉ, Ñ˦ ÷É\n"
-"ÈÏÞÅÔÅ ÂÁÞÉÔÉ ÎÁ Ó×Ï§Ê ÍÁÛÉΦ.\n"
-"\n"
-"ðÅÒÅÓÕ×ÁÎÎÑ ËÕÒÓÏÒÁ ¦ ËÏÒÏÔËÁ ÚÕÐÉÎËÁ ÎÁÄ ÐÅ×ÎÉÍ ÐÕÎËÔÏÍ ÂÕÄÅ\n"
-"×ÉÓצÞÕ×ÁÔÉ Ð¦ÄËÁÚËÕ ÐÏ ÄÁÎ¦Ê ÇÒÕЦ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ÎÁ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï, ÷É ÂÕÄÅÔÅ ÍÁÔÉ ÍÏÖÌÉצÓÔØ\n"
-"×ÉÂÒÁÔÉ ÏËÒÅͦ ÐÁËÅÔÉ ÏÄÉÎ ÐÏ ÏÄÎÏÍÕ. ãÅ ÚÒÕÞÎÏ, ÑËÝÏ ÷É ÄÏÂÒÅ ÚÎÁ¤ÔÅ,\n"
-"Ñ˦ ÐÁËÅÔÉ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ, ÁÂÏ ÑËÝÏ ÷É ÈÏÞÅÔÅ ÍÁÔÉ ÐÏ×ÎÉÊ ËÏÎÔÒÏÌØ ÎÁÄ\n"
-"ÔÉÍ, ÝÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ × ÓÉÓÔÅͦ.  \n"
-"\n"
-"ñËÝÏ ÷É ÐÏÞÁÌÉ ÕÓÔÁÎÏ×ËÕ × ÒÅÖÉͦ \"ðÏÎÏ×ÌÅÎÎÑ\", ÷É ÍÏÖÅÔŠצÄͦÎÉÔÉ\n"
-"×ÉÂ¦Ò ×Ó¦È ÇÒÕÐ ÝÏÂ Õ ÓÉÓÔÅͦ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÌÉÓØ Î¦Ñ˦ ÎÏצ ÐÁËÅÔÉ ¦\n"
-"Ô¦ÌØËÉ ÓÉÓÔÅÍÁ ÐÏÎÏ×ÉÌÁÓØ. "
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"¶ ÎÁÒÅÛÔ¦, × ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÔÏÇÏ, ÞÉ ÷É ×ÉÂÒÁÌÉ ¦ÎÄÉצÄÕÁÌØÎÉÊ ×ɦÒ\n"
-"ÐÁËÅÔ¦× ÞÉ Î¦, ÷ÁÍ ÂÕÄÅ ÐÏËÁÚÁÎÏ ÐÏ×ÎÅ ÄÅÒÅ×Ï ÐÁËÅÔ¦× Ú¦ÂÒÁÎÉÈ ÐÏ\n"
-"ÇÒÕÐÁÈ ¦ ЦÄÇÒÕÐÁÈ. ðÅÒÅÇÌÑÄÁÀÞÉ ÐÁËÅÔÉ ÷É ÚÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÐÏ×Φ\n"
-"ÇÒÕÐÉ, ЦÄÇÒÕÐÉ ÔÁ ¦ÎÄÉצÄÕÁÌØΦ ÐÁËÅÔÉ.\n"
-"\n"
-"ëÏÖÎÏÇÏ ÒÁÚÕ, ËÏÌÉ ÷É ×ÉÂÉÒÁ¤ÔÅ ÐÁËÅÔ × ÄÅÒÅצ, Ú'Ñ×ÌÁ¤ÔØÓÑ Ð¦ÄËÁÚËÁ,\n"
-"ÐÒÁ×ÏÒÕÞ ×¦Ä ÎÁÚ×É. \n"
-" \n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ÚÁ˦ÎÞÉÌÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ\n"
-"÷ÓÔÁÎÏ×ÉÔÉ. ðÏÞÎÅÔØÓÑ ×ÌÁÓÎÅ ÕÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÉ. ñËÝÏ Ë¦ÌØ˦ÓÔØ\n"
-"×ÉÂÒÁÎÉÈ ÐÁËÅÔ¦× ×ÅÌÉËÁ, ÍÏÖÅÔŠЦÔÉ ÐÏÐÉÔÉ ËÁ×É.\n"
-"\n"
-"!! ñËÝÏ ÁÂÏ ÎÁ×ÍÉÓÎÅ, ÁÂÏ ÑË ÓËÌÁÄÏ×Á ÞÁÓÔÉÎÁ ÑËϧÓØ ÇÒÕÐÉ, ÂÕÌÏ\n"
-"×ÉÂÒÁÎÏ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÐÅ×Φ ÓÅÒ×ÅÒÉ, ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÞÉ ÷É\n"
-"ÓÐÒÁ×Ħ ÂÁÖÁ¤ÔÅ ÂÁÞÉÔÉ Ã¦ ÓÅÒ×ÅÒÉ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ. ÷ íÁÎÄÒÅÊËÕ ×Ó¦\n"
-"×ÓÔÁÎÏ×ÌÅΦ ÓÅÒ×ÅÒÉ Á×ÔÏÍÁÔÉÞÎÏ ÚÁÐÕÓËÁÀÔØÓÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ\n"
-"ÓÉÓÔÅÍÉ. îÁצÔØ, ÑËÝÏ ÎÁ ÞÁÓ ËÕЦ×̦ ÓÉÓÔÅÍÉ ÎÅ ÂÕÌÏ ×¦ÄÏÍÏ ÐÒÏÂÌÅÍ Ú\n"
-"ÂÅÚÐÅËÏÀ ÄÁÎÉÈ ÓÅÒ×ÅÒ¦×, ÍÏÖÌÉ×Ï, ÝÏ × Ð¦ÚΦÛÉÊ ÞÁÓ ÔÁ˦ ÐÒÏÂÌÅÍÉ\n"
-"ÂÕÄÕÔØ ×ÉÑ×ÌÅΦ. ïÓÏÂÌÉ×Ï, ÑËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÐÒÏ ÝÏ ÊÄÅ ÍÏ×Á,\n"
-"ÎÁÔÉÓΦÔØ ÔÕÔ ÎÁ î¦. ñËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ôÁË, ÓÅÒ×ÅÒÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ\n"
-"¦ ×ÍÉËÎÅΦ ÎÅÑ×ÎÏ!!\n"
-"\n"
-"ïÐÃ¦Ñ á×ÔÏÍÁÔÉÞΦ ÚÁÌÅÖÎÏÓÔ¦ ÚÁÂÏÒÏÎѤ ÐÏÐÅÒÅÄÖÅÎÎÑ ËÏÌÉ ÐÒÏÇÒÁÍÁ\n"
-"ÕÓÔÁÎÏ×ËÉ ÚÎÁÈÏÄÉÔØ, ÝÏ Ô¦ÌØËÉ ÝÏ ×ÉÂÒÁÎÉÊ (ÞÉ ×¦ÄͦÎÅÎÉÊ ×ɦÒ) ÐÁËÅÔ\n"
-"ÚÁÌÅÖÉÔØ ×¦Ä ¦ÎÛÏÇÏ ÐÁËÅÔÕ.\n"
-"\n"
-"íÁÌÅÎØËÁ ЦËÔÏÇÒÁÍÁ ÇÎÕÞËÏÇÏ ÄÉÓËÁ × ÓÁÍÏÍÕ ÎÉÚÕ ÓÐÉÓËÕ ÄÏÚ×ÏÌѤ\n"
-"ÚÁ×ÁÎÔÁÖÉÔÉ ÓÐÉÓÏË ÐÁËÅÔ¦× Ú ÄÉÓËÅÔÉ, ÑËÝÏ ÐÒÉ ÐÏÐÅÒÅÄÎ¦Ê ÕÓÔÁÎÏ×æ ÷É\n"
-"ÚÂÅÒÅÇÌÉ ÊÏÇÏ ÎÁ ÄÉÓËÅÔÕ. ð¦ÓÌÑ ÎÁÔÉÓËÁÎÎÑ Ã¦¤§ ËÎÏÐËÉ, ÓÉÓÔÅÍÁ\n"
-"ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ ÄÉÓËÅÔÕ ¦Ú ÓÐÉÓËÏÍ ÐÁËÅÔ¦× Õ ÐÒÉצÄ. äÏÄÁÔËÏ×Ï ÷É\n"
-"ÍÏÖÅÔÅ ÏÔÒÉÍÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÔÅ, ÑË ÓÔ×ÏÒÉÔÉ ÔÁËÕ ÄÉÓËÅÔÕ × ÄÒÕǦÊ\n"
-"ÐÏÒÁĦ ÏÓÔÁÎÎØÏÇÏ ÐÕÎËÔÕ."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ËÏÒÅËÔÎÕ ÏÐæÀ ÄÌÑ Ú'¤ÄÎÁÎÎÑ, ÑËÝÏ ÷É ÂÁÖÁ¤ÔŠЦÄËÌÀÞÉÔÉ ÓצÊ\n"
-"ËÏÍÐ'ÀÔÅÒ ÄÏ ÇÌÏÂÁÌØÎÉÈ ÔÅÎÅÔ ÞÉ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦. ðÅÒÛ, Î¦Ö ×ÉÂÉÒÁÔÉ\n"
-"ÏÐæÀ ÄÌÑ Ú'¤ÄÎÁÎÎÑ, ×ÍÉËΦÔØ ÐÒÉÓÔÒ¦Ê, ÝÏ DrakX Í¦Ç ×ÉÚÎÁÞÉÔÉ\n"
-"ÐÒÉÓÔÒ¦Ê Á×ÔÏÍÁÔÉÞÎÏ.\n"
-"\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ ÐÒÏÐÏÎÕ¤ ËÏÎƦ­ÕÒÁæÀ Ú'¤ÄÎÁÎÎÑ Ú ÔÅÎÅÔÁÍÉ ÐÒÉ\n"
-"ÕÓÔÁÎÏ×æ. äÏÓÔÕÐΦ ÔÉÐÉ ËÏÎƦ­ÕÒÁæÊ: Ú×ÉÞÁÊÎÉÊ ÍÏÄÅÍ, ÍÏÄÅÍ ISDN,\n"
-"Ú'¤ÄÎÁÎÎÑ ADSL, ËÁÂÅÌØÎÉÊ ÍÏÄÅÍ ¦, ÎÁÒÅÛÔ¦, Ú×ÉÞÁÊÎÅ Ú'¤ÄÎÁÎÎÑ\n"
-"ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦ (Ethernet).\n"
-"\n"
-"ôÕÔ ÍÉ ÎÅ ÒÏÚÇÌÑÄÁ¤ÍÏ ×Ó¦È ÐÏÄÒÏÂÉÃØ ËÏÖÎÏÇÏ ÔÉÐÕ Ú'¤ÄÎÁÎÎÑ. ðÒÏÓÔÏ\n"
-"ÐÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÷É ÍÁ¤ÔÅ ×Ó¦ ÎÅÏÂȦÄΦ ÄÁΦ ×¦Ä ÐÒÏ×ÁÊÄÅÒÁ ÐÏÓÌÕÇ\n"
-"ÔÅÎÅÔ ÞÉ ÓÉÓÔÅÍÎÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ.\n"
-"\n"
-"íÏÖÅÔÅ Ú×ÅÒÎÕÔÉÓÑ ÄÏ ÐÏÓ¦ÂÎÉËÁ ÚÁ ÄÏÄÁÔËÏ×ÏÀ ¦ÎÆÏÒÍÁæ¤À, ÞÉ ÐÒÏÓÔÏ\n"
-"ÚÁÞÅËÁÊÔÅ, ÄÏËÉ ÓÉÓÔÅÍÁ ×ÓÔÁÎÏ×ÉÔØÓÑ, ¦ ÓËÏÒÉÓÔÁÊÔÅÓØ ÐÒÏÇÒÁÍÏÀ ÄÌÑ\n"
-"×ÓÔÁÎÏ×ÌÅÎÎÑ ËÏÎƦ­ÕÒÁæ§ Ú'¤ÄÎÁÎÎÑ ÔÅÎÅÔ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔŠΦÑËϧ ÍÅÒÅÖ¦, Φ Ú ÇÌÏÂÁÌØÎÉÍÉ ÔÅÎÅÔÅÍÉ, Φ Ú\n"
-"ÌÏËÁÌØÎÏÀ ÍÅÒÅÖÅÀ, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ \"úÁÂÏÒÏÎÉÔÉ ÍÅÒÅÖÕ\".\n"
-"\n"
-"ñËÝÏ Ö ÷É ÈÏÞÅÔÅ ÓËÏÎƦ­ÕÒÕ×ÁÔÉ ÍÅÒÅÖÕ Ð¦ÚΦÛÅ, ЦÓÌÑ ÕÓÔÁÎÏ×ËÉ,\n"
-"ÎÁÔÉÓΦÔØ ÎÁ \"úÁ˦ÎÞÅÎÏ\"."
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Ñ˦ ÓÅÒצÓÉ ÂÕÄÕÔØ ÚÁÐÕÓËÁÔÉÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ\n"
-"ÓÔÁÒÔ¦ ÓÉÓÔÅÍÉ. \n"
-"\n"
-"ôÕÔ ÎÁÄÁ¤ÔØÓÑ ÓÐÉÓÏË ×Ó¦È ÓÌÕÖÂ, ÝÏ ÍÏÖÕÔØ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉÓÑ ÐÒÏÇÒÁÍÏÀ\n"
-"ÕÓÔÁÎÏ×ËÉ. ðÅÒÅÇÌÑÎØÔÅ Õ×ÁÖÎÏ Ã¦ ÓÌÕÖÂÉ ¦ צÄͦΦÔØ ×ÉÂ¦Ò ÔÉÈ, Ñ˦ ÎÅ\n"
-"ÐÏ×ÉÎΦ ÚÁÐÕÓËÁÔÉÓÑ ÐÒÉ ÓÔÁÒÔ¦ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"ëÏÌÉ ÷ÁÛÁ ÍÉÛËÁ ÎÁÓÕ×Á¤ÔØÓÑ ÎÁ ÏÄÉÎ ¦Ú ÐÕÎËÔ¦×, ÎÅ×ÅÌÉÞËÁ ËÕÌØËÁ ¦Ú\n"
-"ЦÄÓËÁÚËÏÀ Ú'Ñ×ÉÔØÓÑ, ÑËÁ ÏÐÉÓÕ¤ ÆÕÎËæ§ ÄÁÎÏÇÏ ÓÅÒצÓÕ.\n"
-"\n"
-"âÕÄØÔÅ ÏÓÏÂÌÉ×Ï Õ×ÁÖÎÉÍÉ, ÑËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÃÀ\n"
-"ÓÉÓÔÅÍÕ ÑË ÓÅÒ×ÅÒ: ÎÁÐÅ×ÎÅ ÎÅ ÐÏÔÒ¦ÂÎÏ ÓÔÁÒÔÕ×ÁÔÉ Î¦Ñ˦ ÓÅÒצÓÉ, Ñ˦\n"
-"ÎÅ ÂÕÄÕÔØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ. ðÁÍ'ÑÔÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, ÝÏ ÄÅÑ˦ ×ÍÉËÎÅΦ\n"
-"ÓÅÒצÓÉ ÍÏÖÕÔØ ÂÕÔÉ ÎÅÂÅÚÐÅÞÎÉÍÉ ÎÁ ÓÅÒ×ÅÒ¦.\n"
-"ñË ÚÁÇÁÌØÎÅ ÐÒÁ×ÉÌÏ, ×ÉÂÉÒÁÊÔÅ Ô¦ÌØËÉ Ô¦ ÓÅÒצÓÉ, Ñ˦ ÷ÁÍ ÓÐÒÁ×Ħ \n"
-"ÎÅÏÂȦÄΦ."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-#, fuzzy
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (×¦Ä ÎÁÚ×É X Window System) ÌÅÖÉÔØ × ÏÓÎÏצ ÇÒÁƦÞÎÏÇÏ ¦ÎÔÅÒÆÅÊÓÕ,\n"
-"ÎÁ ÑËÏÍÕ ÂÁÚÕÀÔØÓÑ ×Ó¦ ÇÒÁƦÞΦ ÓÅÒÅÄÏ×ÉÝÁ (KDE, Gnome, AfterStep,\n"
-"WindowMaker, etc.), ÝÏ ×ÈÏÄÑÔØ ÄÏ ÓËÌÁÄÕ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ. ÷ Ã¦Ê ÓÅËæ§\n"
-"ÕÓÔÁÎÏ×ËÉ drakX ÓÐÒÏÂÕ¤ ÎÁÓÔÒϧÔÉ ËÏÎƦ­ÕÒÁæÀ X Á×ÔÏÍÁÔÉÞÎÏ.\n"
-"\n"
-"ãÑ ÐÒÏÇÒÁÍÁ ÎÅ ÓÐÒÁÃØÏ×Õ¤ ÄÕÖÅ Ò¦ÄËÏ. ´ÄÉÎÏÀ ÐÒÉÞÉÎÏÀ ÎÅÕÄÁÞ¦ ÍÏÖÅ\n"
-"ÂÕÔÉ ÔÏÊ ÆÁËÔ, ÝÏ ÷ÁÛÅ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ ÚÁÎÁÄÔÏ ÓÔÁÒÅ (ÁÂÏ\n"
-"ÚÁÎÁÄÔÏ ÎÏ×Å). ñËÝÏ ËÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏÊÄÅ ÕÓЦÛÎÏ, X ÓÔÁÒÔÕ¤ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"Ú ÎÁÊ×ÉÝÏÀ ÒÏÚĦÌØÎÏÀ ÚÄÁÔΦÓÔÀ, ÎÁ ÑËÕ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ ÁÐÁÒÁÔÕÒÕ ¦\n"
-"ÚÁÌÅÖÎÏ ×¦Ä ÒÏÚͦÒÁ ÍÏΦÔÏÒÁ. ú'Ñ×ÉÔØÓÑ ×¦ËÎÏ Ú ÚÁÐÉÔÁÎÎÑÍ, ÞÉ ÍÏÖÅÔÅ\n"
-"÷É ÐÏÂÁÞÉÔÉ X. \n"
-"\n"
-"ñËÝÏ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ × åËÓÐÅÒÔÎÏÍÕ ÒÅÖÉͦ, ÷É ÐÏÔÒÁÐÉÔÅ ×\n"
-"ÐÒÏÇÒÁÍÕ ðÏͦÞÎÉËÁ ËÏÎƦ­ÕÒÁÔÏÒÁ X. ú×ÅÒΦÔØÓÑ ÄÏ ×¦ÄÐÏצÄÎÏÇÏ ÒÏÚĦÌÕ\n"
-"ÄÏËÕÍÅÎÔÁæ§ Ú ÐÒÉ×ÏÄÕ ÃØÏÇÏ. \n"
-"\n"
-"ñËÝÏ ÷É ÐÏÂÁÞÉÔÅ ÚÁÐÉÔÁÎÎÑ ¦ ÄÁÓÔÅ ÎÁ ÎØÏÇÏ ÓÔ×ÅÒÄÎÕ ×¦ÄÐÏצÄØ, drakX\n"
-"ÐÅÒÅÊÄÅ ÄÏ ÎÁÓÔÕÐÎÏÇÏ ËÒÏËÕ ÕÓÔÁÎÏ×ËÉ ÓÉÓÔÅÍÉ. ñËÝÏ ÷É ÎÅ ÂÁÞÉÔÅ\n"
-"ÚÁÐÉÔÁÎÎÑ, ÃÅ ÐÒÏÓÔÏ ÏÚÎÁÞÁ¤, ÝÏ ËÏÎƦ­ÕÒÁÃ¦Ñ ÂÕÌÁ ÎÅצÒÎÏÀ ¦ ÔÅÓÔ\n"
-"Á×ÔÏÍÁÔÉÞÎÏ ÚÁ˦ÎÞÉÔØÓÑ ÞÅÒÅÚ 10 ÓÅËÕÎÄ, צÄÎÏ×É×ÛÉ ÅËÒÁÎ."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"íÏÖÌÉ×Ï Ú ÐÅÒÛÏÇÏ ÒÁÚÕ ÷É ÎÅ ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÎÁÊËÒÁÝÉÊ ÄÉÓÐÌÅÊ\n"
-"(ÅËÒÁÎ ÚÁÍÁÌÉÊ, ÐÏÓÕÎÕÔÉÊ ×¦Ë, ÔÏÝÏ). ïÓØ ÞÏÍÕ, ÎÁצÔØ ÑËÝÏ X ÓÔÁÒÔÕ¤\n"
-"צÒÎÏ, drakX ÐÅÒÅÐÉÔÁ¤ ÷ÁÓ, ÞÉ Ð¦ÄÈÏÄÉÔØ ÷ÁÍ ÄÁÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ ¦\n"
-"ÚÁÐÒÏÐÏÎÕ¤ ÚͦÎÉÔÉ ÄÅÑ˦ צÄÅÏÒÅÖÉÍÉ, ÐÏËÁÚÁ×ÛÉ §È ÓÐÉÓÏË. \n"
-"\n"
-"ñËÝÏ Î¦ÞÏÇÏ ÎÅ ÓÐÒÁÃÀ¤, ¦ ÷É ÎÅ ÚÍÏÖÅÔÅ ÚÁÐÕÓÔÉÔÉ X ÎÁ Ó×Ï§Ê ÍÁÛÉΦ,\n"
-"×ÉÂÅÒ¦ÔØ ÐÕÎËÔ úͦÎÉÔÉ ×¦ÄÅÏ ÐÌÁÔÕ, ×ÉÂÅÒ¦ÔØ ðÌÁÔÉ ÎÅÍÁ¤ × ÓÐÉÓËÕ\n"
-"(Unlisted card) ¦, ËÏÌÉ drakX ÚÁÐÉÔÁ¤ ÑËÉÊ ÓÅÒ×ÅÒ ÷É ÈÏÞÅÔÅ\n"
-"×ÓÔÁÎÏ×ÉÔÉ, ×ÉÂÅÒ¦ÔØ FBDev. ãÅÊ ÒÅÖÉÍ ÚÁÓÔÒÁÈÏ×ÁÎÉÊ ×¦Ä ÎÅÕÄÁÞ, ÑËÉÊ\n"
-"ЦÄÔÒÉÍÕ¤ÔØÓÑ Â¦ÌØÛ¦ÓÔÀ ÓÕÞÁÓÎÉÈ ×¦ÄÅÏ ÐÌÁÔ. ð¦ÓÌÑ ÃØÏÇÏ ×ÉÂÅÒ¦ÔØ\n"
-"÷ÉÐÒÏÂÕ×ÁÔÉ ÝÅ ÒÁÚ."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"ð¦ÓÌÑ ÃØÏÇÏ ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÞÉ ÈÏÔ¦ÌÉ Â ÷É, ÝÏ ÇÒÁƦÞÎÉÊ\n"
-"¦ÎÔÅÒÆÅÊÓ ×ÍÉËÁ×ÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ. úÁÕ×ÁÖÔÅ, ÝÏ\n"
-"ÃÅ ÚÁÐÉÔÁÎÎÑ ÂÕÄÅ ÚÁÄÁÎÅ ÎÁצÔØ ÑËÝÏ ÷É ×¦ÄÍÏ×ÉÔÅÓØ ×¦Ä ×ÉÐÒÏÂÏ×Õ×ÁÎÎÑ\n"
-"ËÏÎƦ­ÕÒÁæ§. ú×ÉÞÁÊÎÏ Ö, ÑËÝÏ ÷ÁÛÁ ÍÁÛÉÎÁ ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ ÓÅÒ×ÅÒÏÍ,\n"
-"ÁÂÏ ÑËÝÏ ÷É ÎÅ ÚÍÏÇÌÉ ×¦ÒÎÏ ÎÁÓÔÒϧÔÉ X, ÔÕÔ ËÒÁÝŠצÄÐÏצÓÔÉ \"î¦\"."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"ôÅÐÅÒ ×É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÄÅ ÓÁÍÅ ×É Â ÈÏÔ¦ÌÉ ×ÓÔÁÎÏ×ÉÔÉ Ó×ÏÀ ÓÉÓÔÅÍÕ\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ ÎÁ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ.  ñËÝÏ ÄÉÓË ÐÕÓÔÉÊ, ÁÂÏ ÑËÝÏ ×¦Î\n"
-"ÐÏ×ΦÓÔÀ ÚÁÊÎÑÔÉÊ ¦ÎÛÏÀ ÏÐÅÒÁæÊÎÏÀ ÓÉÓÔÅÍÏÀ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-"ÐÅÒÅÒÏÚÐÏĦÌÉÔÉ ÄÉÓË. æÁËÔÉÞÎÏ, ÐÅÒÅÒÏÚÐÏÄ¦Ì ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ ÏÚÎÁÞÁ¤,\n"
-"ÝÏ ÄÉÓË ÂÕÄÅ ÒÏÚĦÌÅÎÏ ÎÁ ÌÏǦÞΦ ЦÄÒÏÚĦÌÉ, ÄÌÑ ÔÏÇÏ, ÝÏ ÓÔ×ÏÒÉÔÉ\n"
-"ÐÒÏÓÔ¦Ò ÄÌÑ ÕÓÔÁÎÏ×ËÉ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ.\n"
-"\n"
-"þÅÒÅÚ ÔÅ, ÝÏ ÎÁÓ̦ÄËÉ ×¦Ä ÐÅÒÅÒÏÚÐÏĦÌÕ ÄÉÓËÕ Ú×ÉÞÁÊÎÏ ÎÅÚ×ÏÒÏÔΦ, ÃÑ\n"
-"ÏÐÅÒÁÃ¦Ñ ÍÏÖÅ ÂÕÔÉ È×ÉÌÀÀÞÏÀ ÄÌÑ ÎÅÄÏÓצÄÞÅÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ.\n"
-"\n"
-"ñËÝÏ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ ÐÒÏÇÒÁÍÏÀ ÕÓÔÁÎÏ×ËÉ × ÅËÓÐÅÒÔÎÏÍÕ ÒÅÖÉͦ, ÷É\n"
-"×צÊÄÅÔÅ × ÚÁӦ ÄÌÑ ÒÏÚÂÉ×ËÉ ÄÉÓË¦× ÎÁ ЦÄÒÏÚĦÌÉ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ:\n"
-"DiskDrake. ÷¦Ä ÎÁÄÁ¤ ÍÏÖÌÉצÓÔØ ÔÏÞÎÏÇÏ ×ÉÂÏÒÕ ÒÏÚͦҦ×\n"
-"ЦÄÒÏÚĦ̦×. ðÏÄÉצÔØÓÑ ÒÏÚÄ¦Ì DiskDrake × Ð¦ÄÒÕÞÎÉËÕ. ÷É ÍÏÖÅÔÅ ÔÁËÏÖ\n"
-"ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÐÏͦÞÎÉËÁÍÉ ÄÌÑ Ò¦ÚÎÉÈ ÅÔÁÐ¦× ÕÓÔÁÎÏ×ËÉ, ÑËÝÏ ËÌÁÃÎÅÔÅ\n"
-"ËÎÏÐËÕ ðÏͦÞÎÉË.\n"
-"\n"
-"ãÅÊ ÐÏͦÞÎÉË ÓÐÒÏÝÕ¤ ÐÒÏÃÅÓ. ðÅÒÛ, Î¦Ö ÐÏÞÉÎÁÔÉ ÐÅÒÅÒÏÚÐÏÄ¦Ì ÄÉÓËÕ,\n"
-"ÐÒÏËÏÎÓÕÌØÔÕÊÔÅÓØ Ú ÐÏÓ¦ÂÎÉËÏÍ ËÏÒÉÓÔÕ×ÁÞÁ.\n"
-"\n"
-"ñËÝÏ Ð¦ÄÒÏÚĦÌÉ ×ÖÅ ÂÕÌÏ ×ÉÚÎÁÞÅÎÏ (×¦Ä ÐÏÐÅÒÅÄÎØϧ ÕÓÔÁÎÏ×ËÉ ÁÂÏ ÚÁ\n"
-"ÄÏÐÏÍÏÇÏÀ ¦ÎÛϧ ÐÒÏÇÒÁÍÉ ÒÏÚÐÏĦÌÕ ÄÉÓ˦×), ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ÉÂÒÁÔÉ\n"
-"æ ЦÄÒÏÚĦÌÉ ÄÌÑ Õ×ÓÔÁÎÏ×ÌÅÎÎÑ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ ÎÁ ÃÉÈ\n"
-"ЦÄÒÏÚĦÌÁÈ.\n"
-"\n"
-"ñËÝÏ ÔÁ˦ ЦÄÒÏÚĦÌÉ ÝÅ ÎÅ ÂÕÌÉ ×ÉÚÎÁÞÅΦ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ §È\n"
-"ÓÔ×ÏÒÉÔÉ. äÌÑ ÃØÏÇÏ ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÏͦÞÎÉËÏÍ, ÑËÉÊ ÷É\n"
-"ÂÁÞÉÔÅ ×ÇÏÒ¦. ÷ ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ËÏÎƦ­ÕÇÁæ§ ÷ÁÛÏÇÏ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÷É\n"
-"ÍÏÖÅÔÅ ÍÁÔÉ Ë¦ÌØËÁ Ò¦ÚÎÉÈ ×ÁÒ¦ÁÎÔ¦× ËÏÎƦ­ÕÒÁæ§.\n"
-"\n"
-"* ëÏÒÉÓÔÕ×ÁÔÉÓÑ ¦ÓÎÕÀÞÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ: ÐÏͦÞÎÉË ×ÉÑ×É× ÏÄÉÎ ÁÂÏ\n"
-"¦ÌØÛŠЦÄÒÏÚÄ¦Ì¦× ì¦ÎÁËÓÁ ÎÁ ÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ. ñËÝÏ ×É ÈÏÞÅÔÅ\n"
-"ÚÂÅÒÅÇÔÉ Ã¦ ЦÄÒÏÚĦÌÉ, ×ÉÂÅÒ¦ÔØ ÃÅÊ ÐÕÎËÔ.\n"
-"\n"
-"\n"
-"* óÔÅÒÔÉ ×ÅÓØ ÄÉÓË: ÑËÝÏ ×É ÈÏÞÅÔÅ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÎÁ ×Ó¦È Ð¦ÄÒÏÚĦÌÁÈ\n"
-"÷ÁÛÏÇÏ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ ¦ ÚÁͦÎÉÔÉ §È ÎÏ×ÏÀ ÓÉÓÔÅÍÏÀ íÁÎÄÒÅÊË ì¦ÎÁËÓ,\n"
-"ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÀ ÏÐæÀ. âÕÄØÔÅ Õ×ÁÖΦ, ÂÏ ×ÉÂÒÁ×ÛÉ ÃÅÊ\n"
-"ÒÅÖÉÍ, ×É ×ÖÅ ÎÅ ÚÍÏÖÅÔÅ ÐÏ×ÅÒÎÕÔÉÓØ ÎÁÚÁÄ.\n"
-"\n"
-"* óËÏÒÉÓÔÕ×ÁÔÉÓØ ×¦ÌØÎÉÍ ÐÒÏÓÔÏÒÏÍ ÎÁ ЦÄÒÏÚĦ̦ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ\n"
-"Windows: ÑËÝÏ ÎÁ ËÏÍÐ'ÀÔÅÒ¦ ×ÓÔÁÎÏ×ÌÅÎÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ Microsoft\n"
-"Windows ¦ ×ÏÎÁ ÚÁÊÍÁ¤ ×ÅÓØ ÐÒÏÓÔ¦Ò ÎÁ ÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ, ÷É\n"
-"ÐÏ×ÉÎΦ ÓÔ×ÏÒÉÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò ÎÁ ÄÉÓËÕ ÄÌÑ ì¦ÎÁËÓÁ. ãÅ ÍÏÖÎÁ\n"
-"ÚÒÏÂÉÔÉ, ÓÔÅÒÛÉ ÐÏ×ΦÓÔÀ ×ÓÀ ÓÉÓÔÅÍÕ Windows (ÄÉ×. \"óÔÅÒÔÉ ×ÅÓØ ÄÉÓË\"\n"
-"ÁÂÏ ÒÅÖÉÍ ÕÓÔÁÎÏ×ËÉ \"åËÓÐÅÒÔ\") ÁÂÏ ÚͦÎÉ×ÛÉ ÒÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ, ÑËÉÊ\n"
-"ÚÁÊÎÑÔÉÊ Windows. úͦÎÁ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ ÍÏÖÅ ÂÕÔÉ ÚÒÏÂÌÅÎÁ ÂÅÚ\n"
-"×ÔÒÁÔÉ ÄÁÎÉÈ. ãÅÊ ÓÐÏӦ ÕÓÔÁÎÏ×ËÉ ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ, ÑËÝÏ ×É ÈÏÞÅÔÅ ÍÁÔÉ\n"
-"ÏÂÉÄצ ÓÉÓÔÅÍÉ, ¦ Microsoft Windows, ¦ íÁÎÄÒÅÊË ì¦ÎÁËÓ ×ÓÔÁÎÏ×ÌÅΦ ÎÁ\n"
-"Ó×ϤÍÕ ËÏÍÐ'ÀÔÅÒ¦.\n"
-"\n"
-"ðÅÒÛ, Î¦Ö ×ÉÂÉÒÁÔÉ ÃÅÊ ÒÅÖÉÍ, ÚÒÏÚÕͦÊÔÅ, ÝÏ Õ ÃØÏÍÕ ×ÉÐÁÄËÕ ÒÏÚͦÒ\n"
-"ЦÄÒÏÚĦÌÕ ÄÌÑ Microsoft Windows ÂÕÄÅ ÍÅÎÛÉÍ, Î¦Ö ÚÁÒÁÚ. ãÅ ÏÚÎÁÞÁ¤,\n"
-"ÝÏ ×É ÂÕÄÅÔÅ ÍÁÔÉ ÍÅÎÛŠצÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÐÒÉ ÒÏÂÏÔ¦ × Microsoft\n"
-"Windows ÄÌÑ ÚÁÐÉÓÕ ÷ÁÛÉÈ ÄÁÎÉÈ ÔÁ ÐÒÏÇÒÁÍ.\n"
-"\n"
-"* óÔÅÒÔÉ Windows: ÃÅ ÐÒÏÓÔÏ Ú¦ÔÒÅ ÐÏ×ΦÓÔÀ ×ÅÓØ ÄÉÓË ¦ ÐÏÞÎÅ ÓצÖÉÊ\n"
-"ÐÏÄ¦Ì ÎÁ ЦÄÒÏÚĦÌÉ. ÷Ó¦ ÄÁΦ ÎÁ ÄÉÓËÕ ÂÕÄÅ ×ÔÒÁÞÅÎÏ.\n"
-"\n"
-"!! ñËÝÏ ÷É ×ÉÂÅÒÅÔÅ ÃÅÊ ÐÕÎËÔ, ×Ó¦ ÄÁΦ ÎÁ ÄÉÓËÕ ÂÕÄÕÔØ ×ÔÒÁÞÅΦ. !!\n"
-"\n"
-"* åËÓÐÅÒÔÎÉÊ ÒÅÖÉÍ: ÑËÝÏ ×É ÈÏÞÅÔÅ ×ÒÕÞÎÕ ÐÅÒÅÒÏÚÐÏĦÌÉÔÉ ÐÒÏÓÔ¦Ò ÎÁ\n"
-"÷ÁÛÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ, ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÅÊ ÒÅÖÉÍ. ïÄÎÁË ÂÕÄØÔÅ\n"
-"ÏÂÅÒÅÖÎÉÍÉ ÐÅÒÛ, Î¦Ö ×ÉÂÉÒÁÔÉ ÃÅÊ ÒÅÖÉÍ. ãÅ -- ÐÏÔÕÖÎÉÊ, ÁÌÅ ÄÕÖÅ\n"
-"ÎÅÂÅÚÐÅÞÎÉÊ ÒÅÖÉÍ. ÷É ÍÏÖÅÔÅ ×ÔÒÁÔÉÔÉ ×Ó¦ ÄÁΦ ÄÕÖÅ ÐÒÏÓÔÏ. ïÔÖÅ, ÎÅ\n"
-"×ÉÂÉÒÁÊÔÅ ÃÅÊ ÒÅÖÉÍ, ÑËÝÏ ÄÏÂÒÅ ÎÅ ÒÏÚÕͦ¤ÔÅ, ÝÏ ÓÁÍÅ ×É ÒÏÂÉÔÅ."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"âÕÄØ-ÑËÉÊ Ú ÎÏ×ÉÈ ×ÉÚÎÁÞÅÎÉÈ Ð¦ÄÒÏÚÄ¦Ì¦× ÍÁ¤ ÂÕÔÉ ×¦ÄÆÏÒÍÁÔÏ×ÁÎÉÊ ÄÌÑ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ (ÆÏÒÍÁÔÕ×ÁÎÎÑ ÏÚÎÁÞÁ¤ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ).\n"
-"\n"
-"úÁÒÁÚ ÷É, ÍÏÖÌÉ×Ï, ÚÁÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ ÄÅÑ˦ Ú ÕÖÅ ¦ÓÎÕÀÞÉÈ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÄÌÑ ÔÏÇÏ, ÝÏ ÓÔÅÒÔÉ ÄÁΦ, Ñ˦ ÎÁ ÎÉÈ ÚÁÐÉÓÁΦ. ñËÝÏ ÷É\n"
-"ÈÏÞÅÔÅ ÃÅ ÚÒÏÂÉÔÉ, ×ÉÂÅÒ¦ÔØ ÔÁËÏÖ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ×É ÈÏÞÅÔÅ\n"
-"צÄÆÏÒÍÁÔÕ×ÁÔÉ.\n"
-"\n"
-"úÁÕ×ÁÖÔÅ, ÏÄÎÁË, ÝÏ ÎÅ ÏÂÏ×'ÑÚËÏ×Ï ÆÏÒÍÁÔÕ×ÁÔÉ ×Ó¦ ЦÄÒÏÚĦÌÉ, Ñ˦\n"
-"¦ÓÎÕ×ÁÌÉ ÒÁΦÛÅ. ÷É ÍÁ¤ÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ͦÓÔÑÔØ\n"
-"ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ (ÔÁ˦, ÑË \"/\", \"/usr\" ÞÉ \"/var\"), ÁÌÅ ×É ÎÅ ÍÁ¤ÔÅ\n"
-"ÆÏÒÍÁÔÕ×ÁÔÉ Ô¦ ÒÏÚĦÌÉ, Ñ˦ ͦÓÔÑÔØ ÄÁΦ, Ñ˦ ×É Â ÈÏÔ¦ÌÉ ÚÂÅÒÅÇÔÉ\n"
-"(ÔÉÐÏ×Ï ÃŠЦÄÒÏÚÄ¦Ì \"/home\").\n"
-"\n"
-"âÕÄØÔÅ Õ×ÁÖΦ Ú ×ÉÂÏÒÏÍ Ð¦ÄÒÏÚĦ̦×. ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ ×Ó¦ ÄÁΦ ÎÁ\n"
-"ЦÄÒÏÚĦÌÁÈ ÂÕÄÕÔØ ÓÔÅÒÔ¦ ¦ ×É ÎÅ ÚÍÏÖÅÔŠצÄÎÏ×ÉÔÉ Î¦ÞÏÇÏ Ú ÎÉÈ.\n"
-"\n"
-"ëÌÁÃΦÔØ ÎÁ \"çÁÒÁÚÄ\" ËÏÌÉ ×É ÇÏÔÏצ ÐÒÉÓÔÕÐÉÔÉ ÄÏ ÆÏÒÍÁÔÕ×ÁÎÎÑ\n"
-"ЦÄÒÏÚĦ̦×.\n"
-"\n"
-"ëÌÁÃΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\", ÑËÝÏ ×É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ ¦ÎÛ¦ ЦÄÒÏÚĦÌÉ ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÎÏ×Õ ÓÉÓÔÅÍÕ íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
-"\n"
-"îÁÔÉÓΦÔØ ÎÁ äÏÄÁÔËÏ×Ï, ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌÉ ÄÌÑ §ÈÎØϧ\n"
-"ÐÅÒÅצÒËÉ ÎÁ ¦ÓÎÕ×ÁÎÎÑ Ú¦ÊÎÉÈ ÂÌÏ˦×."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"÷ÁÛÁ ÎÏ×Á ÓÉÓÔÅÍÁ íÁÎÄÒÅÊË ì¦ÎÁËÓ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ. ÷\n"
-"ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÒÏÚͦÒÕ ÐÁËÅÔ¦×, Ñ˦ ×É ×ÉÂÒÁÌÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÔÁ צÄ\n"
-"Û×ÉÄËÏÓÔ¦ ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ ÃÑ ÏÐÅÒÁÃ¦Ñ ÍÏÖÅ ÚÁÊÎÑÔÉ ×¦Ä Ë¦ÌØËÏÈ\n"
-"È×ÉÌÉÎ ÄÏ ×¦ÄÞÕÔÎÏÇÏ ×¦ÄÔÉÎËÕ ÞÁÓÕ.\n"
-"\n"
-"\n"
-"ðÏÔÅÒЦÔØ, ÂÕÄØ-ÌÁÓËÁ."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"ðÅÒÛ, Î¦Ö ¦ÔÉ ÄÁ̦, ÷É ÍÁ¤ÔÅ ÐÒÏÞÉÔÁÔÉ Õ×ÁÖÎÏ ÕÍÏ×É Ì¦ÃÅÎÚ¦§. ÷ÏÎÁ\n"
-"ÓÔÏÓÕ¤ÔØÓÑ ×ÓØÏÇÏ ÄÉÓÔÒÕÂÕÔÉ×Õ íÁÎÄÒÅÊË ì¦ÎÁËÓ, ¦, ÑËÝÏ ÷É ÎÅ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦§, ÎÁÔÉÓΦÔØ ËÎÏÐËÕ ÷¦ÄÍÏ×ÉÔÉÓØ. ãÅ ÔÏÇÏ\n"
-"Ö ÞÁÓÕ ×¦ÄͦÎÉÔØ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ. äÌÑ ÐÒÏÄÏ×ÖÅÎÎÑ ÕÓÔÁÎÏ×ËÉ\n"
-"ÎÁÔÉÓΦÔØ ËÎÏÐËÕ ðÏÇÏÄÉÔÉÓØ."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"ôÅÐÅÒ ÞÁÓ ×ÉÂÒÁÔÉ Ò¦×ÅÎØ ÄÏÓÔÕÐÕ (ÂÅÚÐÅËÉ) ÄÌÑ ÷ÁÛϧ ÓÉÓÔÅÍÉ. úÏÌÏÔÅ\n"
-"ÐÒÁ×ÉÌÏ: ÞÉÍ ÛÉÒÛÅ ËÏÌÏ ÄÏÓÔÕÐÕ ÍÁ¤ ÍÁÛÉÎÁ, ¦ ÞÉÍ ×ÁÖÌÉצۦ ÄÁΦ, ÝÏ ×\n"
-"Î¦Ê ÚÂÅÒ¦ÇÁÀÔØÓÑ, ÔÉÍ ×ÉÝÉÍ ÍÁ¤ ÂÕÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÓÉÓÔÅÍÉ. áÌÅ ×\n"
-"¦ÌØÛÏÓÔ¦ ×ÉÐÁÄ˦×, ×ÉÝÉÊ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÏÓÑÇÁ¤ÔØÓÑ ÚÁ ÒÁÈÕÎÏË\n"
-"ÄÏÄÁÔËÏ×ÉÈ ÎÅÚÒÕÞÎÏÓÔÅÊ × ËÏÒÉÓÔÕ×ÁÎΦ. äÏÄÁÔËÏ×Õ ¦ÎÆÏÒÍÁæÀ Ú ÃØÏÇÏ\n"
-"ÐÉÔÁÎÎÑ ÍÏÖÎÁ ÏÔÒÉÍÁÔÉ Ú ÓÅËæ§ MSEC × äÏצÄËÏ×ÏÍÕ ðÏÓ¦ÂÎÉËÕ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ, ÎÁ ÞÏÍÕ ÚÕÐÉÎÉÔÉÓØ, ÚÁÌÉÛÔÅ ×ÓÅ ÑË ¤."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"úÁÒÁÚ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ×ÉÂÒÁÔÉ, Ñ˦ ЦÄÒÏÚĦÌÉ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÷ÁÛϧ\n"
-"ÎÏ×ϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ íÁÎÄÒÅÊË. ñËÝÏ Ã¦ ЦÄÒÏÚĦÌÉ ×ÖÅ ÂÕÌÉ ×ÉÚÎÁÞÅΦ\n"
-"(×¦Ä ÐÏÐÅÒÅÄÎØϧ ÕÓÔÁÎÏ×ËÉ ÓÉÓÔÅÍÉ GNU/Linux ÁÂÏ ÓÔ×ÏÒÅΦ ¦ÎÛÏÀ\n"
-"ÐÒÏÇÒÁÍÏÀ ÒÏÚÐÏĦÌÕ ÄÉÓËÕ), ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÁÔÉÓÑ ×ÖÅ ÇÏÔÏ×ÉÍÉ\n"
-"ЦÄÒÏÚĦÌÁÍÉ. ÷ ¦ÎÛÏÍÕ ×ÉÐÁÄËÕ, ЦÄÒÏÚĦÌÉ ÎÁ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ ÍÁÀÔØ\n"
-"ÂÕÔÉ ×ÉÚÎÁÞÅÎÉÍÉ ÐÅÒÛ, Î¦Ö ÐÅÒÅÈÏÄÉÔÉ ÄÏ ÕÓÔÁÎÏ×ËÉ.\n"
-"\n"
-"äÌÑ ÓÔ×ÏÒÅÎÎÑ Ð¦ÄÒÏÚÄ¦Ì¦× ×É ÓÐÅÒÛÕ ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÖÏÒÓÔËÉÊ ÄÉÓË. ÷É\n"
-"ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÄÉÓË ËÌÁÃÎÕ×ÛÉ ÎÁ \"hda\" (ÑËÝÏ ÍÏ×Á ÊÄÅ ÐÒÏ ÐÅÒÛÉÊ ÄÉÓË\n"
-"ÔÉÐÉ IDE), ÁÂÏ ÎÁ \"hdb\" (ÄÌÑ ÄÒÕÇÏÇÏ ÄÉÓËÕ × ÓÉÓÔÅͦ ÔÉÐÕ IDE), ÁÂÏ ÎÁ\n"
-"\"sda\", ÑËÝÏ ×É ÂÕÄÅÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÓÉÓÔÅÍÕ ÎÁ ÐÅÒÛÏÍÕ ÄÉÓËÕ ÔÉÐÕ SCSI\n"
-"¦ ÔÁË ÄÁ̦.\n"
-"\n"
-"ýÏ ÒÏÚÐÏĦÌÉÔÉ ÄÉÓË ÎÁ ÒÏÚĦÌÉ, ×É ÍÏÖÅÔÅ ÓËÏÒÉÓÔÁÔÉÓÑ ÃÉÍÉ ÐÕÎËÔÁÍÉ ÍÅÎÀ:\n"
-"\n"
-"* ïÞÉÓÔÉÔÉ ×ÓÅ: ÃÅÊ ÐÕÎËÔ ÓÔÉÒÁ¤ ×Ó¦ ЦÄÒÏÚĦÌÉ ÎÁ ×ÉÂÒÁÎÏÍÕ ÖÏÒÓÔËÏÍÕ "
-"ÄÉÓËÕ.\n"
-"\n"
-"* òÏÚÐÏĦÌÉÔÉ Á×ÔÏÍÁÔÉÞÎÏ: ÃÅÊ ÐÕÎËÔ ÍÅÎÀ ÄÏÐÏÍÏÖÅ ÷ÁÍ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ÓÔ×ÏÒÉÔÉ Ð¦ÄÒÏÚÄ¦Ì ÔÉÐÕ Ext2 ÔÁ swap ÎÁ צÌØÎÏÍÕ ÐÒÏÓÔÏÒ¦ ÄÉÓËÕ.\n"
-"\n"
-"* ÷¦ÄÎÏ×ÉÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×: ÑËÝÏ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÷ÁÛÏÇÏ ÄÉÓËÕ\n"
-"Ú¦ÐÓÏ×ÁÎÁ, ×É ÍÏÖÅÔÅ ÓÐÅÒÛÕ ÓÐÒÏÂÕ×ÁÔÉ ×¦ÄÎÏ×ÉÔÉ §§ ÓËÏÒÉÓÔÕ×Á×ÛÉÓØ\n"
-"ÃÉÍ ÐÕÎËÔÏÍ. âÕÄØ-ÌÁÓËÁ, ÂÕÄØÔÅ-ÏÂÅÒÅÖÎÉÍÉ, ¦ ÐÁÍ'ÑÔÁÊÔÅ, ÝÏ ÃÅÊ ÐÕÎËÔ\n"
-"ÎÅ ÚÁ×ÖÄÉ ÓÐÒÁÃØÏ×Õ¤.\n"
-"\n"
-"* ðÏ×ÅÒÎÕÔÉÓØ: íÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÃÉÍ, ÝÏ צÄÍÏ×ÉÔÉÓØ ×¦Ä ÚͦÎ,\n"
-"×ÎÅÓÅÎÉÈ ×ÁÍÉ.\n"
-"\n"
-"* ðÅÒÅÞÉÔÁÔÉ: íÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ÃÉÍ, ÝÏ צÄÍÏ×ÉÔÉÓØ ×¦Ä ÚͦÎ,\n"
-"×ÎÅÓÅÎÉÈ ×ÁÍÉ ¦ ÐÅÒÅÐÒÏÞÉÔÁÔÉ ÏÒÉ­¦ÎÁÌØÎÕ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×.\n"
-"\n"
-"\n"
-"* ðÏͦÞÎÉË: ñËÝÏ ×É ÈÏÞÅÔÅ ÓËÏÒÉÓÔÁÔÉÓØ ÐÏͦÞÎÉËÏÍ ÄÌÑ ÒÏÚÐÏĦÌÕ\n"
-"ÄÉÓËÕ. òÅËÏÍÅÎÄÏ×ÁÎÉÊ ÒÅÖÉÍ, ÑËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÇÌÉÂÏËÉÈ ÚÎÁÎØ ÐÒÏ\n"
-"ÒÏÚÐÏÄ¦Ì ÄÉÓËÕ. \n"
-"\n"
-"* ÷¦ÄÎÏ×ÉÔÉ Ú ÇÎÕÞËÏÇÏ ÄÉÓËÕ: ñËÝÏ ×É ÚÁÐÉÓÁÌÉ ÐÏÐÅÒÅÄÎØÏ Ó×ÏÀ ÔÁÂÌÉÃÀ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÎÁ ÇÎÕÞËÉÊ ÄÉÓË. úÁÒÁÚ ×É ÍÏÖÅÔŠצÄÎÏ×ÉÔÉ ÃÀ ÔÁÂÌÉÃÀ Ú\n"
-"ÇÎÕÞËÏÇÏ ÄÉÓËÕ.\n"
-"\n"
-"* úÁÐÉÓÁÔÉ ÎÁ ÇÎÕÞËÉÊ ÄÉÓË: ñËÝÏ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ÚÁÒÁÚ ÔÁÂÌÉÃÀ\n"
-"ЦÄÒÏÚÄ¦Ì¦× ÎÁ ÇÎÕÞËÉÊ ÄÉÓË ÄÌÑ ÔÏÇÏ, ÝÏ §§ ÐÏÔ¦Í ÍÏÖÎÁ ÂÕÌÏ\n"
-"צÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ. äÕÖÅ ÒÅËÏÍÅÎÄÕ¤ÍÏ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ ÒÅÖÉÍÏÍ. \n"
-"\n"
-"* çÏÔÏ×Ï: ð¦ÓÌÑ ÔÏÇÏ, ÑË ×É ×ÖÅ ÚÁ˦ÎÞÉÌÉ Ú ÐÅÒÅÒÏÚÐÏĦÌÏÍ ÷ÁÛÏÇÏ\n"
-"ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÓËÏÒÉÓÔÁÊÔÅÓØ ÃÉÍ ÐÕÎËÔÏÍ, ÝÏ ÚÁÐÉÓÁÔÉ ÚͦÎÉ ÎÁ\n"
-"ÄÉÓË. \n"
-"\n"
-"ëÏÌÉ ÐÅ×ÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ×ÉÂÒÁÎÏ, ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓØ ËÌÁצÛÁÍÉ:\n"
-"\n"
-"        * Ctrl-c ÝÏ ÓÔ×ÏÒÉÔÉ ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (ÑËÝÏ ×ÉÂÒÁÎÏ ÐÕÓÔÉÊ "
-"ЦÄÒÏÚĦÌ)\n"
-"\n"
-"        * Ctrl-d ÝÏ ÓÔÅÒÔÉ Ð¦ÄÒÏÚĦÌ\n"
-"\n"
-"        * Ctrl-m ÝÏ ×ÉÚÎÁÞÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ\n"
-"\n"
-"ñËÝÏ ×É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÓÉÓÔÅÍÕ ÎÁ ËÏÍÐ'ÀÔÅÒ Ú ÐÒÏÃÅÓÏÒÏÍ PPC, ×É ÍÏÖÅÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ ÍÁÌÅÎØËÉÊ Ð¦ÄÒÏÚÄ¦Ì ÔÉÐÕ HFS ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ 'bootstrap'\n"
-"(ÒÏÚͦÒÏÍ ÎÅ ÍÅÎÛÅ 1í ÄÌÑ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ yaboot. ñËÝÏ ×É ×ÉÒ¦ÛÉÔÅ\n"
-"ÓÔ×ÏÒÉÔÉ Ð¦ÄÒÏÚÄ¦Ì ÔÒÏÈÉ Â¦ÌØÛÏÇÏ ÒÏÚͦÒÕ (ÓËÁÖ¦ÍÏ 50íÂ, ×É ÚÍÏÖÅÔÅ\n"
-"ÔÁËÏÖ ÚÂÅÒ¦ÇÁÔÉ ÎÁ ÎØÏÍÕ ÒÅÚÅÒ×ÎÅ ÑÄÒÏ ÓÉÓÔÅÍÉ ÔÁ צÒÔÕÁÌØÎÉÊ ÄÉÓË ÄÌÑ\n"
-"Á×ÁÒ¦ÊÎÉÈ ÚÁ×ÁÎÔÁÖÅÎØ ÓÉÓÔÅÍÉ). "
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"îÁ ÷ÁÛÏÍÕ ÄÉÓËÕ ÚÎÁÊÄÅÎÏ Â¦ÌØÛÅ ÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÁ, ÝÏ ÎÁÌÅÖÁÔØ\n"
-"ÏÐÅÒÁæÊÎ¦Ê ÓÉÓÔÅͦ ÷¦ÎÄÏ×Ó. ÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÏÄÉÎ Ú ÎÉÈ, ÒÏÚͦÒ\n"
-"ÑËÏÇÏ ÂÉ ×É ÈÏÔ¦ÌÉ ÚͦÎÉÔÉ, ÄÌÑ ÔÏÇÏ ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
-"\n"
-"ëÏÖÅΠЦÄÒÏÚÄ¦Ì ÐÏÄÁÎÏ × ÔÁËÏÍÕ ×ÉÇÌÑĦ: \"îÁÚ×Á × ì¦ÎÁËÓ¦\", \"îÁÚ×Á Õ\n"
-"÷¦ÎÄÏ×Ó\", \"òÏÚͦÒ\".\n"
-"\n"
-"\"îÁÚ×Á × ì¦ÎÁËÓ¦\" ÚÁËÏÄÏ×ÁÎÁ ÔÁËÉÍ ÞÉÎÏÍ: \"ÔÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\",\n"
-"\"ÎÏÍÅÒ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\", \"ÎÏÍÅÒ Ð¦ÄÒÏÚĦÌÕ ÎÁ ÄÉÓËÕ\", (îÁÐÒÉËÌÁÄ:\n"
-"\"hda1\").\n"
-"\n"
-"ôÉÐ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ\" - ÃÅ \"hd\", ÑËÝÏ ×É ÍÁ¤ÔÅ ÄÉÓË ÔÉÐÕ IDE, ¦ \"sd\",\n"
-"ÑËÝÏ ×É ÍÁ¤ÔÅ ÖÏÒÓÔËÉÊ ÄÉÓË ÔÉÐÕ SCSI.\n"
-"\n"
-"\"îÏÍÅÒ ÖÏÒÓËÏÇÏ ÄÉÓËÕ\" - ÃÅ ÚÁ×ÖÄÉ Ì¦ÔÅÒÁ ЦÓÌÑ \"hd\" ÞÉ \"sd\". äÌÑ\n"
-"ÄÉÓË¦× ÔÉÐÕ IDE ÃÅ:\n"
-"\n"
-"    * \"a\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË (master) ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"b\" - ×ÔÏÒÉÎÎÉÊ (slave) ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"c\" - ÇÏÌÏ×ÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ  ËÏÎÔÒÏÌÅÒ¦ IDE,\n"
-"\n"
-"    * \"d\" - ×ÔÏÒÉÎÎÉÊ ÄÉÓË ÎÁ ÄÒÕÇÏÍÕ  ËÏÎÔÒÏÌÅÒ¦ IDE.\n"
-"\n"
-"äÌÑ SCSI ÄÉÓË¦× \"a\" ÏÚÎÁÞÁ¤ \"ÇÏÌÏ×ÎÉÊ ÄÉÓË\", \"b\" - ÄÒÕÇÏÒÑÄÎÉÊ ÄÉÓË, "
-"¦\n"
-"Ô.Ä. ...\n"
-"\n"
-"\"îÁÚ×Á Õ ÷¦ÎÄÏ×Ó\" - Ê̦ÔÅÒÁ ÷ÁÛÏÇÏ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ, ÑË ×É §§ ÂÁÞÉÔÅ\n"
-"ÐÒÉ ÒÏÂÏÔ¦ Õ ÷¦ÎÄÏ×Ó (ÐÅÒÛÉÊ ÄÉÓË ÞÉ Ð¦ÄÒÏÚÄ¦Ì ÎÁÚÉ×Á¤ÔØÓÑ \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "ðÏÔÅÒЦÔØ ÂÕÄØ-ÌÁÓËÁ. ãÅ ÍÏÖÅ ÚÁÊÎÑÔÉ Ë¦ÌØËÁ È×ÉÌÉÎ."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ÚÁÐÉÔÁ¤ ÞÉ ÷É ÐÒÏ×ÁÄÉÔÅ ÓÔÁÎÄÁÒÔÎÕ ÕÓÔÁÎÏ×ËÕ (\"òÅËÏÍÅÎÄÏ×ÁÎÁ\")\n"
-"ÞÉ, ÍÏÖÌÉ×Ï, ÈÏÞÅÔÅ ÍÁÔÉ Â¦ÌØÛÉÊ ËÏÎÔÒÏÌØ ÎÁÄ ÔÉÍ, ÝÏ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
-"(\"åËÓÐÅÒÔ\").  drakX ÚÁÐÉÔÁ¤ ÐÒÏ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ. ôÕÔ ÷É ÍÏÖÅÔÅ ÔÁËÏÖ\n"
-"×ÉÂÒÁÔÉ ÞÉ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ ÎÏ×Õ ÓÉÓÔÅÍÕ, ÞÉ ÐÏÎÏ×ÌÀ¤ÔÅ ×ÖÅ ¦ÓÎÕÀÞÕ\n"
-"ÓÉÓÔÅÍÕ íÁÎÄÒÅÊË ì¦ÎÁËÓ. ÷ÉÂÅÒ¦ÔØ, ÝÏ ÷ÁÍ Ð¦ÄÈÏÄÉÔØ. ÷É ÍÏÖÅÔÅ\n"
-"×ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ, ÐÏ×ΦÓÔÀ ×ÉÔÅÒÛÉ ÓÔÁÒÕ. ÷É ÍÏÖÅÔÅ ÔÁËÏÖ ÐÏÎÏ×ÉÔÉ\n"
-"×ÖÅ ¦ÓÎÕÀÞÕ ÓÉÓÔÅÍÕ.\n"
-"\n"
-"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, \"õÓÔÁÎÏ×ËÁ\", ÑËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÐÏÐÅÒÅÄÎØϧ ×ÅÒÓ¦§\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓÁ ×ÓÔÁÎÏ×ÌÅÎÏÇÏ ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ÁÂÏ ÑËÝÏ ×É ÈÏÞÅÔÅ\n"
-"ÍÁÔÉ Ë¦ÌØËÁ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ.\n"
-"\n"
-"ñËÝÏ ×É ÈÏÞÅÔÅ ÐÏÎÏ×ÉÔÉ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÕ ×ÅÒÓ¦À íÁÎÄÒÅÊË ì¦ÎÁËÓÁ ÎÁ\n"
-"Ó×ϤÍÕ ËÏÍÐ'ÀÔÅÒ¦, ×ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, \"ðÏÎÏ×ÌÅÎÎÑ\".\n"
-"\n"
-"÷ ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÷ÁÛÏÇÏ Ò¦×ÎÑ ÚÎÁÎØ ÓÉÓÔÅÍÉ GNU/Linux ×É ÍÏÖÅÔÅ\n"
-"×ÉÂÒÁÔÉ ÏÄÉÎ ¦Ú ÎÁÓÔÕÐÎÉÈ Ò¦×Î¦× ÓËÌÁÄÎÏÓÔ¦ ÕÓÔÁÎÏ×ËÉ ÞÉ ÐÏÎÏ×ÌÅÎÎÑ\n"
-"÷ÁÛϧ ÓÉÓÔÅÍÉ íÁÎÄÒÅÊË ì¦ÎÁËÓ:\n"
-"\n"
-" * òÅËÏÍÅÎÄÏ×ÁÎÉÊ: ÷ÉÂÉÒÁÊÔÅ ÃÅÊ ÐÕÎËÔ, ÑËÝÏ ×É Î¦ËÏÌÉ × ÖÉÔÔ¦ ÎÅ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÌÉ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ GNU/Linux. õÓÔÁÎÏ×ËÁ ÂÕÄÅ ÄÕÖÅ\n"
-"ÐÒÏÓÔÁ, ¦ ÷ÁÍ ÄÏ×ÅÄÅÔØÓÑ ÄÁÔÉ ×¦ÄÐÏצÄØ Ô¦ÌØËÉ ÎÁ ˦ÌØËÁ ÚÁÐÉÔÁÎØ.\n"
-"\n"
-" * óÐÅæÁÌØÎÉÊ: ñËÝÏ ×É ÄÏÓÔÁÔÎØÏÀ ͦÒÏÀ ÚÎÁÊÏͦ Ú ÏÐÅÒÁæÊÎÏÀ\n"
-"ÓÉÓÔÅÍÏÀ GNU/Linux, ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÏÓÎÏ×ÎÉÊ ÒÅÖÉÍ ×ÉËÏÒÉÓÔÁÎÎÑ ÷ÁÛϧ\n"
-"ÓÉÓÔÅÍÉ (ÒÏÂÏÞÁ ÓÔÁÎæÑ, ÓÅÒ×ÅÒ, ÒÏÚÒÏÂËÁ). ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-"צÄÐÏצÓÔÉ ÎÁ ¦ÌØÛÅ ÚÁÐÉÔÁÎØ, Î¦Ö ÐÒÉ ÕÓÔÁÎÏ×æ ÔÉÐÕ\n"
-"\"òÅËÏÍÅÎÄÏ×ÁÎÉÊ\", ÔÏÂÔÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÚÎÁÔÉ, ÑË ÐÒÁÃÀ¤ Gnu/Linux, ÝÏÂ\n"
-"×ÉÂÒÁÔÉ ÃÅÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ.\n"
-"        \n"
-"        * åËÓÐÅÒÔ: ÑËÝÏ ×É ÍÁ¤ÔÅ ÇÌÉÂÏ˦ ÚÎÁÎÎÑ ÓÉÓÔÅÍÉ GNU/Linux,\n"
-"        ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÅÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ. ôÁË ÓÁÍÏ, ÑË ¦ × ËÌÁÓ¦\n"
-"        \"óÐÅæÁÌØÎÉÊ\", ×¦Ä ÷ÁÓ ÂÕÄÅ ×ÉÍÁÇÁÔÉÓÑ ×ÉÂÒÁÔÉ ÏÓÎÏ×ÎÉÊ ÔÉÐ\n"
-"        ×ÉËÏÒÉÓÔÁÎÎÑ Ã¦¤§ ÓÉÓÔÅÍÉ (ÒÏÂÏÞÁ ÓÔÁÎæÑ, ÓÅÒ×ÅÒ, ÒÏÚÒÏÂËÁ). "
-"âÕÄØÔÅ\n"
-"        ÄÕÖÅ Õ×ÁÖÎÉÍÉ ×ÉÂÉÒÁÀÞÉ ÃÅÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ. ÷É ÚÍÏÖÅÔÅ ×ÉËÏÎÁÔÉ\n"
-"        ÕΦËÁÌØÎÕ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ. ÷¦ÄÐÏצĦ ÎÁ ÚÁÐÉÔÁÎÎÑ ÍÏÖÕÔØ ÂÕÔÉ "
-"ÄÕÖÅ\n"
-"        ×ÁÖËÉÍÉ, ÑËÝÏ ×É ÎÅ ×ÏÌÏĦ¤ÔÅ ÇÌÉÂÏËÉÍÉ ÚÎÁÎÎÑÍÉ ÓÉÓÔÅÍÉ\n"
-"        GNU/Linux. ïÔÖÅ, ÎÅ ×ÉÂÉÒÁÊÔÅ ÃÅÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ, ÑËÝÏ ×É ÎÅ ÐÅ×Φ, "
-"ÝÏ\n"
-"        ÃÅ ÓÁÍÅ ÔÅ, ÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ. "
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"ú×ÉÞÎÏ drakX ×ÉÂÉÒÁ¤ צÒÎÕ ËÌÁצÁÔÕÒÕ (× ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÍÏ×É, ÑËÏÀ ÷É\n"
-"ËÏÒÉÓÔÕ¤ÔÅÓØ) ¦ ÷É ÎÅ ÐÏÂÁÞÉÔÅ ÃØÏÇÏ ËÒÏËÕ. ïÄÎÁË, ÍÏÖÌÉ×Ï, ÷É ÎÅ\n"
-"ÍÁ¤ÔÅ ËÌÁצÁÔÕÒÉ, ÝÏ ÔÏÞÎÏ ×¦ÄÐÏצÄÁ¤ ÷ÁÛ¦Ê ÍÏצ: ÎÁÐÒÉËÌÁÄ, ÑËÝÏ ÷É\n"
-"ÁÇÌÏÍÏ×ÎÉÊ Û×ÅÄ, ÷É ×ÓÅ-ÏÄÎÏ ÍÏÖÅÔÅ ÚÁÂÁÖÁÔÉ ËÏÒÉÓÔÕ×ÁÔÉÓØ Û×ÅÄÓØËÏÀ\n"
-"ËÌÁצÁÔÕÒÏÀ. áÂÏ, ÑËÝÏ ÷É ÇÏ×ÏÒÉÔÅ ÁÎÇ̦ÊÓØËÏÀ, ÁÌÅ ÖÉ×ÅÔÅ × ë×ÅÂÅËÕ,\n"
-"÷É ÐÏÔÒÁÐÌѤÔÅ × ÁÎÁÌÏ­¦ÞÎÕ ÓÉÔÕÁæÀ. ÷ ÏÂÏÈ ×ÉÐÁÄËÁÈ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÐÏ×ÅÒÎÕÔÉÓØ ÄÏ ÃØÏÇÏ ÅÔÁÐÕ ÕÓÔÁÎÏ×ËÉ ¦ ×ÉÂÒÁÔÉ ×¦ÄÐÏצÄÎÕ ËÌÁצÁÔÕÒÕ Ú\n"
-"ÎÁÄÁÎÏÇÏ ÓÐÉÓËÕ. ÷ÓÅ, ÝÏ ÐÏÔÒ¦ÂÎÏ, ÃÅ ×ÉÂÒÁÔÉ ÐÏÔÒ¦ÂÎÕ ËÌÁצÁÔÕÒÕ ¦Ú\n"
-"ÓÐÉÓËÕ, ÝÏ Ú'Ñ×ÌѤÔØÓÑ ÐÅÒÅÄ ÷ÁÍÉ.\n"
-"\n"
-"îÁÔÉÓΦÔØ ËÎÏÐËÕ äÏÄÁÔËÏ×Ï ¦ ÷É ÐÏÂÁÞÉÔÅ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÒÏÚËÌÁÄÏË\n"
-"ËÌÁצÁÔÕÒ."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"âÕÄØ ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÍÏ×Õ ÄÌÑ ÕÓÔÁÎÏ×ËÕ ÓÉÓÔÅÍÉ ÔÁ ËÏÒÉÓÔÕ×ÁÎÎÑ Ð¦ÓÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ. \n"
-"\n"
-"ðÒÉÓÕÔÎÑ ÔÁËÏÖ ËÎÏÐËÁ \"äÏÄÁÔËÏ×Ï\", ÑËÁ ÄÏÚ×ÏÌѤ ÷ÁÍ ×ÉÂÒÁÔÉ ¦ÎÛ¦ ÍÏ×É,\n"
-"Ñ˦ ÍÏÖÕÔØ ÂÕÔÉ ÔÁËÏÖ ÕÓÔÁÎÏ×ÌÅÎÉÍÉ × ÓÉÓÔÅͦ. ÷É ÚÍÏÖÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍÉ ÍÏ×ÁÍÉ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ. ñËÝÏ, ÎÁÐÒÉËÌÁÄ, ÎÁ ÷ÁÛ¦Ê\n"
-"ÍÁÛÉΦ (Õ ÑËϧ ÁÎÇ̦ÊÓØËÁ ×ÓÔÁÎÏ×ÌÅÎÁ ÏÓÎÏ×ÎÏÀ ÍÏ×ÏÀ) ÂÕÄÕÔØ ÐÒÁÃÀ×ÁÔÉ\n"
-"¦ÓÐÁÎæ, ×ÉÂÅÒ¦ÔØ × ÄÏÄÁÔËÏ×ÉÈ ÍÏ×ÁÈ ¶ÓÐÁÎÓØËÁ|¶ÓÐÁΦÑ.\n"
-"\n"
-"ð¦ÓÌÑ ×ÉÂÏÒÕ ÍÏ×É ¦ ЦÄÔ×ÅÒÄÖÅÎÎÑ, ÷É Á×ÔÏÍÁÔÉÞÎÏ ÐÅÒÅÈÏÄÉÔÅ ÄÏ\n"
-"ÎÁÓÔÕÐÎÏÇÏ ËÒÏËÕ."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ×¦ÒÎÉÊ ÐÏÒÔ. îÁÐÒÉËÌÁÄ, ÐÏÒÔ Ð¦Ä ÎÁÚ×ÏÀ COM1 Õ MS\n"
-"Windows ÎÏÓÉÔØ ÎÁÚ×Õ ttyS0 Õ GNU/ì¦ÎÁËÓ¦."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"îÁÓÔÕÐÎÅ - ÎÁʦÌØÛ ×ÁÛÌÉ×ÉÊ ËÒÏË Ú ÔÏÞËÉ ÚÏÒÕ ÂÅÚÐÅËÉ ÷ÁÛϧ ÓÉÓÔÅÍÉ\n"
-"GNU/Linux: ×ÉÂ¦Ò ÐÁÒÏÌÑ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞÁ Root. Root - ÃÅ ÓÉÓÔÅÍÎÉÊ\n"
-"ÁÄͦΦÓÔÒÁÔÏÒ ¦ ¤ÄÉÎÁ ÏÓÏÂÁ, ÑË¦Ê ÄÏÚ×ÏÌÅÎÏ ÒÏÂÉÔÉ ÐÏÎÏ×ÌÅÎÎÑ ÓÉÓÔÅÍÉ,\n"
-"ÄÏÄÁ×ÁÔÉ ËÏÒÉÓÔÕ×ÁÞ¦×, ÚͦÎÀ×ÁÔÉ ÚÁÇÁÌØÎÕ ËÏÎƦ­ÕÒÁæÀ ÓÉÓÔÅÍÉ, ÔÁËÅ\n"
-"¦ÎÛÅ. ëÏÒÏÔÛÅ - Root ÍÏÖÅ ×ÓÅ! ïÓØ ÞÏÍÕ ÷ÁÍ ÓÌ¦Ä ×ÉÂÉÒÁÔÉ ÐÁÒÏÌØ, ÑËÉÊ\n"
-"×ÁÖËÏ ×ÇÁÄÁÔÉ, drakX ÓËÁÖÅ ÷ÁÍ, ÑËÝÏ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÌÅÇËÉÊ. ñË\n"
-"ÐÏËÁÚÁÎÏ, ÷ÁÍ ÎÅÏÂÏ×'ÑÚËÏ×Ï ××ÏÄÉÔÉ ÐÁÒÏÌØ, ÁÌÅ ÍÉ ÎÁÓÔ¦ÊÌÉ×Ï\n"
-"ÒÅËÏÍÅÎÄÕ¤ÍÏ ÷ÁÍ ×ÓÅ-ÔÁËÉ ×ÉÂÒÁÔÉ ÐÁÒÏÌØ, ÈÏÞÁ Â Ú ÏÄΦ¤§-¤ÖÉÎϧ\n"
-"ÐÒÉÞÉÎÉ: ÎÅ ÄÕÍÁÊÔÅ, ÝÏ ÞÅÒÅÚ ÔÅ, ÝÏ ÷É ÚÁ×ÁÎÔÁÖÉÌÉ GNU/Linux, ÷ÁÛÁ\n"
-"ÓÉÓÔÅÍÁ צÌØÎÁ ×¦Ä ÐÏÍÉÌÏË. ãÅ ÎÅ ÔÁË, ÏÓ˦ÌØËÉ Root ÍÏÖÅ ÐÅÒÅ×ÁÖÉÔÉ\n"
-"×Ó¦ ÚÁÂÏÒÏÎÉ ¦ ÎÅÎÁÒÏËÏÍ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÎÁ ×ÓÉÈ Ð¦ÄÒÏÚĦÌÁÈ\n"
-"Ú×ÅÒÔÁÀÞÉÓØ ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ Ð¦ÄÒÏÚĦ̦×! ôÏÍÕ, ÄÏÓÔÕÐ ÄÏ ÒÁÈÕÎËÕ root\n"
-"ÍÁ¤ ÂÕÔÉ ÚÁÈÉÝÅÎÉÍ.\n"
-"\n"
-"ðÁÒÏÌØ ÍÁ¤ ÂÕÔÉ ÓÕͦÛÛÀ ÁÌÆÁצÔÎÏ-ÃÉÆÒÏ×ÉÈ ÓÉÍ×ÏÌ¦× ¦ ÂÕÔÉ ÚÁ×ÄÏ×ÖËÉ\n"
-"ÈÏÞÁ- 8 ÓÉÍ×Ï̦×. î¦ËÏÌÉ ÎÅ ÚÁÐÉÓÕÊÔÅ ÐÁÒÏÌØ!\n"
-"\n"
-"îÅ ×ÉÂÉÒÁÊÔÅ ÚÁÎÁÄÔÏ ÄÏ×ÇÉÊ ÞÉ ÓËÌÁÄÎÉÊ ÐÁÒÏÌØ. ÷ÁÍ ÊÏÇÏ\n"
-"ÚÁÐÁÍ'ÑÔÏ×Õ×ÁÔÉ.\n"
-"\n"
-"ëÏÌÉ ÷É ÂÕÄÅÔÅ ÄÒÕËÕ×ÁÔÉ ÐÁÒÏÌØ ÎÁ ÅËÒÁΦ, ÊÏÇÏ ÎÅ ÂÕÄÅ ×ÉÄÎÏ. ïÓØ\n"
-"ÞÏÍÕ ÐÒÉ ×ÉÂÏÒ¦ ÐÁÒÏÌÑ, ÷ÁÍ ÚÁÐÒÏÐÏÎÕ¤ÔØÓÑ ××ÅÓÔÉ ÊÏÇÏ Äצަ, ÏÓ˦ÌØËÉ\n"
-"ÐÏÍÉÌËÁ ÐÒÉ ÐÅÒÛÏÍÕ ××ÅÄÅÎΦ ÐÁÒÏÌÑ, ÍÏÖÅ ÂÕÔÉ ÐÒÏÂÌÅÍÏÀ: ÐÒÉ\n"
-"ÒŤÓÔÒÁæ§ × ÓÉÓÔÅͦ ÷ÁÍ ÔÒÅÂÁ ÂÕÄÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ \"ÎÅצÒÎÉÍ\" ÐÁÒÏÌÅÍ.\n"
-"\n"
-"÷ ÅËÓÐÅÒÔÎÏÍÕ ÒÅÖÉͦ, Õ ÷ÁÓ ÂÕÄÅ ÍÏÖÌÉצÓÔØ ×ËÁÚÁÔÉ, ÞÉ ÷É ÂÕÄÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÑËÉÍ-ÎÅÂÕÄØ ÓÅÒ×ÅÒÏÍ Á×ÔÅÎÔÉËÁæ§: NIS ÞÉ LDAP.\n"
-"\n"
-"ñËÝÏ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ NIS'ÏÍ (ÞÉ LDAP) ×ÉÂÅÒ¦ÔØ ÏÐæÀ \"ëÏÒÉÓÔÕ×ÁÔÉÓØ\n"
-"NIS'ÏÍ\" (\"LDAP\").  ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÃØÏÇÏ, ÚÁÐÉÔÁÊÔÅ × Ó×ÏÇÏ\n"
-"ÓÉÓÔÅÍÎÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ.\n"
-"\n"
-"ñËÝÏ ËÏÍÐ'ÀÔÅÒ ÎŠЦÄËÌÀÞÅÎÉÊ ÄÏ ÍÅÒÅÖ¦, ×ÉÂÅÒ¦ÔØ ìÏËÁÌØΦ ÆÁÊÌÉ ÄÌÉ\n"
-"Á×ÔÅÎÔÉËÁæ§.."
-
-#: ../../help.pm_.c:663
-#, fuzzy
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO ¦ GRUB - ÃÅ ÚÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÓÉÓÔÅÍÉ ÄÌÑ GNU/Linux. ãÅÊ ËÒÏË Ú×ÉÞÎÏ\n"
-"ÐÏ×ΦÓÔÀ Á×ÔÏÍÁÔÉÚÏ×ÁÎÉÊ. æÁËÔÉÞÎÏ, drakX ÐÒÏ×ÅÄÅ ÁÎÁ̦Ú\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÓÅËÔÏÒÁ ÄÉÓËÕ ¦ ÂÕÄŠĦÑÔÉ ×¦ÄÐÏצÄÎÏ ÄÏ ÔÏÇÏ, ÝÏ ×\n"
-"ÎØÏÍÕ ×ÉÑ×ÉÔØÓÑ:\n"
-"\n"
-" * ÑËÝÏ ÔÕÔ ÐÒÉÓÕÔÎ¦Ê ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÓÅËÔÏÒ Windows, צΠÚÁͦÎÉÔØ\n"
-"ÊÏÇÏ ÎÁ ÓÅËÔÏÒ GRUB/LILO ÔÁËÉÍ ÞÉÎÏÍ, ÝÏ ÷É ÍÏÇÌÉ ÓÔÁÒÔÕ×ÁÔÉ ÏÂϤ - ¦\n"
-"GNU/Linux, ¦ Windows;\n"
-"\n"
-" * ÑËÝÏ ÚÎÁÊÄÅÎÉÊ ÂÌÏË ×¦Ä GRUB ÞÉ LILO, צΠÂÕÄÅ ÚÁͦÎÅÎÉÊ ÎÁ ÎÏ×ÉÊ. \n"
-"\n"
-"ñËÝÏ ÓÉÔÕÁÃ¦Ñ ÎÅ ÔÁËÁ Þ¦ÔËÁ, drakX ÚÁÐÒÏÐÏÎÕ¤ ÷ÁÍ ×ÉÂ¦Ò Ú Ë¦ÌØËÏÍÁ\n"
-"ÍÏÖÌÉ×ÉÍÉ ×ÉÈÏÄÁÍÉ. \n"
-"\n"
-" * ñËÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ×ÖÉ×ÁÔÉ: ÷É ÍÁ¤ÔÅ ÔÒÉ ×ÁÒ¦ÁÎÔÉ ÎÁ ×ɦÒ:\n"
-"   \n"
-"   * LILO Ú ÇÒÁƦÞÎÉÍ ÍÅÎÀ: ÑËÝÏ ÷É ÎÁÄÁ¤ÔÅ ÐÅÒÅ×ÁÇÕ LILO Ú ÊÏÇÏ\n"
-"     ÇÒÁƦÞÎÏÀ ÏÂÏÌÏÎËÏÀ.\n"
-"\n"
-"   * Grub: ÑËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ Grub (Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ).\n"
-"\n"
-"   * LILO Ú ÔÅËÓÔÏ×ÉÍ ÍÅÎÀ: ÑËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ LILO Ú ÔÅËÓÔÏ×ÉÍ\n"
-"     ÍÅÎÀ.\n"
-"\n"
-" * ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ: Õ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-"ÚͦÎÀ×ÁÔÉ ÎÅÑ×ÎÏ ×ÓÔÁÎÏ×ÌÅÎÉÊ ÄÉÓË (/dev/hda), ÁÌÅ ÑËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ,\n"
-"÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÎÁ ÄÒÕÇÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ\n"
-"(/dev/hdb) ÞÉ ÎÁצÔØ ÎÁ ÄÉÓËÅÔ¦ (/de/fd0). \n"
-"\n"
-" * úÁÔÒÉÍËÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×ÎÏÇÏ ÑÄÒÁ: ÃÅ ÚÁÔÒÉÍËÁ ÐÒÉ\n"
-"ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ÑËÁ ÎÁÄÁ¤ÔØÓÑ ËÏÒÉÓÔÕ×ÁÞÅצ, ÝÏ צΠÍÁ×\n"
-"ÍÏÖÌÉצÓÔØ ×ÉÂÒÁÔÉ ¦ÎÛÉÊ ÐÕÎËÔ × ÍÅÎÀ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ.\n"
-"\n"
-"!! âÕÄØÔÅ Õ×ÁÖÎÉÍÉ: ÑËÝÏ ÷É ÎÁÔÉÓÎÅÔÅ ËÎÏÐËÕ \"÷¦ÄͦÎÉÔÉ\" (¦ ÔÉÍ ÓÁÍÉÍ\n"
-"×ËÁÖÅÔÅ ÐÒÏÇÒÁͦ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÓÉÓÔÅÍÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ),\n"
-"ÐÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÷É ÍÁ¤ÔÅ Õ ÚÁÐÁÓ¦ ÍÅÔÏÄ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ! âÕÄØÔÅ ÔÁËÏÖ ÐÅ×ÎÉÍÉ, ÝÏ ÷É ÄÏÂÒÅ ÚÎÁ¤ÔÅ, ÝÏ ÷É\n"
-"ÒÏÂÉÔÉ, ËÏÌÉ ÷É ÚͦÎÀ¤ÔÅ ÂÕÄØ-Ñ˦ ÐÁÒÁÍÅÔÒÉ ÔÕÔ!!\n"
-"\n"
-"îÁÔÉÓÎÕ×ÛÉ ËÎÏÐËÕ \"äÏÄÁÔËÏ×Ï\" × ÃØÏÍÕ ×¦ËΦ, ÷É ÏÔÒÉÍÁ¤ÔÅ ÄÏÓÔÕÐ ÄÏ\n"
-"ÂÁÇÁÔØÏÈ ÄÏÄÁÔËÏ×ÉÈ ËÏÎƦ­ÕÒÁæÊÎÉÈ ÐÁÒÁÍÅÔÒ¦× ÐÒÉÚÎÁÞÅÎÉÈ ÄÌÑ\n"
-"ÄÏÓצÄÞÅÎÉÈ ËÏÒÉÓÔÕ×ÁÞ¦×.\n"
-"\n"
-"íÁÎÄÒÅÊË ì¦ÎÁËÓ ×ÓÔÁÎÏ×ÌÀ¤ Ó×¦Ê ×ÌÁÓÎÉÊ ÓÉÓÔÅÍÎÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ, ÑËÉÊ\n"
-"ÄÏÚ×ÏÌÉÔØ ÷ÁÍ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÁÂÏ GNU/Linux, ÁÂÏ ÂÕÄØ-ÑËÕ ¦ÎÛÕ\n"
-"ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ, ×ÓÔÁÎÏ×ÌÅÎÕ ÎÁ Ã¦Ê ÍÁÛÉΦ.\n"
-"\n"
-"ñËÝÏ ÎÁ ÍÁÛÉΦ ×ÓÔÁÎÏ×ÌÅÎÁ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ, ×ÏÎÁ Á×ÔÏÍÁÔÉÞÎÏ\n"
-"ÂÕÄÅ ÄÏÄÁÎÁ ÄÏ ÓÐÉÓËÕ ÓÉÓÔÅÍ × ÍÅÎÀ. ôÕÔ ÍÏÖÎÁ ÚͦÎÉÔÉ ¦ÓÎÕÀÞ¦\n"
-"ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ËÏÖÎϧ ÓÉÓÔÅÍÉ. ðÏÄצÊÎÅ ËÌÁÃÁÎÎÑ ÎÁ ÐÕÎËÔ¦\n"
-"ÍÅÎÀ ÄÏÚ×ÏÌÉÔØ ÷ÁÍ ÚͦÎÉÔÉ ¦ÓÎÕÀÞ¦ ÐÁÒÁÍÅÔÒÉ, ÁÂÏ ÓÔÅÒÔÉ ÄÁÎÉÊ ÐÕÎËÔ\n"
-"ÍÅÎÀ. \"äÏÄÁÔÉ\" ÓÔ×ÏÒÀÖ ÎÏ×ÉÊ ÐÕÎËÔ. ¶ \"úÁ˦ÎÞÅÎÏ\" ÐÅÒÅÈÏÄÉÔØ ÎÁ\n"
-"ÎÁÓÔÕÐÎÉÊ ËÒÏË ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader - ÚÁ×ÁÎÔÁÖÕ×ÁÞ ì¦ÎÁËÓÁ) ÔÁ Grub -- ÃÅ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÞ¦ ÓÉÓÔÅÍÉ: ×ÏÎÉ ÍÏÖÕÔØ ÚÁ×ÁÎÔÁÖÉÔÉ ÁÂÏ GNU/ì¦ÎÁËÓ ÁÂÏ\n"
-"ÂÕÄØ-ÑËÕ ¦ÎÛÕ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦. úÁ ÎÏÒÍÁÌØÎÉÈ\n"
-"ÕÍÏ× Ã¦ ÏÐÅÒÁæÊΦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ ×ÉÚÎÁÞÁÀÔØÓÑ ÔÁ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ\n"
-"ÃÅ ÎÅ ÔÁË, ×É ÍÏÖÅÔÅ ÄÏÄÁÔÉ ÐÏÔÒ¦ÂÎÉÊ ÐÕÎËÔ ÓÁÍÏÓÔ¦ÊÎÏ. õ×ÁÖÎÏ\n"
-"×ÉÂÅÒ¦ÔØ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ.\n"
-"\n"
-"\n"
-"÷É, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÚÁÈÏÞÅÔÅ ÚÁËÒÉÔÉ ÄÏÓÔÕÐ ÄÏ ÃÉÈ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ\n"
-"¦ÎÛÉÍ, × ÃØÏÍÕ ×ÉÐÁÄËÕ ×É ÍÏÖÅÔÅ ÓÔÅÒÔÉ ×¦ÄÐÏצÄΦ ÐÕÎËÔÉ × ÆÁÊ̦\n"
-"ËÏÎƦ­ÕÒÁæ§. áÌÅ × ÃØÏÍÕ ×ÉÐÁÄËÕ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÂÕÄÅ ÓÐÅæÁÌØÎÁ\n"
-"ÄÉÓËÅÔÁ, ÝÏ ÚÁ×ÁÎÔÁÖÉÔÉ Ã¦ ÓÉÓÔÅÍÉ!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"÷É ÐÏ×ÉÎΦ ×ËÁÚÁÔÉ, ÄÅ ÓÁÍÅ ×É ÈÏÞÅÔÅ ÚÁÐÉÓÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÏÔÒ¦ÂÎÕ\n"
-"ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ GNU/ì¦ÎÁËÓÁ.\n"
-"\n"
-"\n"
-"ëÒ¦Í ÔÏÇÏ ×ÉÐÁÄËÕ, ËÏÌÉ ×É ÁÂÓÏÌÀÔÎÏ ×ÐÅ×ÎÅΦ × ÔÏÍÕ, ÝÏ ×É ÒÏÂÉÔÅ,\n"
-"×ÉÂÅÒ¦ÔØ \"ðÅÒÛÉÊ ÓÅËÔÏÒ ÄÉÓËÕ (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ÓÐÒÏÂÕ¤ צÄÛÕËÁÔÉ ×Ó¦ ÖÏÒÓÔ˦ ÄÉÓËÉ Õ ÓÉÓÔÅͦ ¦ ÏÄÎÏÞÁÓÎÏ\n"
-"צÄÛÕËÁÔÉ ÐÌÁÔÉ PCI SCSI.  ñËÝÏ DrakX ÚÎÁÊÄÅ ÐÌÁÔÕ SCSI ¦ ÚÎÁ¤ ÑËÉÊ\n"
-"ÄÒÁÊ×ÅÒ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ú Ã¦¤À ÐÌÁÔÏÀ, צΠÁ×ÔÏÍÁÔÉÞÎÏ ×ÓÔÁÎÏ×ÉÔØ ÃÅÊ\n"
-"ÄÒÁÊ×ÅÒ (æ ÄÒÁÊ×ÅÒÉ).\n"
-"\n"
-"÷ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÎÅ ×ÓÑ ÁÐÁÒÁÔÕÒÁ ÒÏÚЦÚÎÁ¤ÔØÓÑ ÐÏ×ΦÓÔÀ. ñËÝÏ ×É ÎÅ\n"
-"ÍÁ¤ÔÅ ÐÌÁÔÉ SCSI, ÍÁ¤ÔÅ ISA SCSI ÐÌÁÔÕ, ÁÂÏ PCI SCSI ÐÌÁÔÕ, ÑËÁ ÎÅ\n"
-"ÒÏÚЦÚÎÁ¤ÔØÓÑ DrakX, ÷ÁÍ ÂÕÄÅ ÚÁÄÁÎÅ ÚÁÐÉÔÁÎÎÑ, ÐÒÏ ÔÅ ÞÉ ¤ Õ ÷ÁÛ¦Ê\n"
-"ÓÉÓÔÅͦ SCSI ÐÌÁÔÁ. ñËÝÏ ÔÁËϧ ÐÌÁÔÉ Õ ÷ÁÓ ÎÅÍÁ¤, ÐÒÏÓÔÏ ËÌÁÃΦÔØ ÎÁ\n"
-"\"î¦\". ñËÝÏ ×É ËÌÁÃÎÅÔÅ ÎÁ \"ôÁË\", ÷ÁÍ ÂÕÄÅ ÎÁÄÁÎÏ ÓÐÉÓÏË ÄÒÁÊ×ÅÒ¦×, Ú\n"
-"ÑËÏÇÏ ÷ÁÍ ÔÒÅÂÁ ×ÉÂÒÁÔÉ ÐÏÔÒ¦ÂÎÉÊ.\n"
-"\n"
-"ñËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ÒÕÞÎÕ ×ÉÂÉÒÁÔÉ ÄÒÁÊ×ÅÒ, DrakX ÚÁÐÉÔÁ¤ Õ ÷ÁÓ,\n"
-"ÞÉ ×É ÈÏÞÅÔÅ ×ËÁÚÁÔÉ Ñ˦ÓØ ÐÅ×Φ ÏÐæ§ ÄÌÑ ÄÒÁÊ×ÅÒÁ. ëÒÁÝÅ, ÑËÝÏ ÷É\n"
-"ÄÏÚ×ÏÌÉÔÅ DrakX ×ÉÐÒÏÂÕ×ÁÔÉ ÐÌÁÔÕ, ÝÏ ×ÉÚÎÁÞÉÔÉ ÐÏÔÒ¦ÂΦ\n"
-"ÏÐæ§. ú×ÉÞÎÏ ÃÅ ÐÒÁÃÀ¤ ÎÏÒÍÁÌØÎÏ.\n"
-"\n"
-"ñËÝÏ ÃÅ ÎÅ ÓÐÒÁÃÀ¤, ÷ÁÍ ÓÌ¦Ä ×ËÁÚÁÔÉ ÐÏÔÒ¦ÂΦ ÏÐæ§ ÄÌÑ\n"
-"ÄÒÁÊ×ÅÒÁ. ðÅÒÅÇÌÑÎØÔÅ \"ðÏÓ¦ÂÎÉË ÐÏ ÕÓÔÁÎÏ×æ\" (òÏÚÄ¦Ì 3, ЦÄÒÏÚĦÌ\n"
-"\"úÎÁÈÏÄÖÅÎÎÑ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ÷ÁÛÕ ÁÐÁÒÁÔÕÒÕ\"), Ú ÄÏËÕÍÅÎÔÁæ§ ÐÏ\n"
-"ÁÐÁÒÁÔÎÏÍÕ ÚÁÂÅÚÐÅÞÅÎÎÀ ÁÂÏ Ú ÄÏÍÁÛÎØϧ ÓÔÏÒ¦ÎËÉ ×ÉÒÏÂÎÉËÁ ÁÐÁÒÁÔÕÒÉ\n"
-"ÁÂÏ Ä¦ÚÎÁÊÔÅÓÑ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ Ú Windows (ÑËÝÏ ×É ÍÁ¤ÔÅ ÃÀ ÓÉÓÔÅÍÕ\n"
-"ÎÁ Ó×ϤÍÕ ËÏÍÐ'ÀÔÅÒ¦)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"íÏÖÅÔÅ ÄÏÄÁÔÉ ÄÏÄÁÔËÏצ ÐÕÎËÔÉ ÄÌÑ yaboot, ÁÂÏ ÄÌÑ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ,\n"
-"¦ÎÛÉÈ ÑÄÅÒ ÞÉ ÄÌÑ Á×ÁÒ¦ÊÎÏÇÏ ÏÂÒÁÚÕ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-"äÌÑ ¦ÎÛÉÈ ïó - ÐÕÎËÔ ÓËÌÁÄÁ¤ÔØÓÑ Ô¦ÌØËÉ Ú ÅÔÉËÅÔËÉ ÔÁ ЦÄÒÏÚĦÌÕ ÄÌÑ\n"
-"ËÏÒÅÎÅ×ϧ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"äÌÑ ì¦ÎÁËÓÁ ¤ ˦ÌØËÁ ÍÏÖÌÉ×ÉÈ ÐÁÒÁÍÅÔÒ¦×: \n"
-"\n"
-"  * åÔÉËÅÔËÁ: ÃÅ ÐÒÏÓÔÏ ÎÁÚ×Á, ÑËÕ ×É ÍÁ¤ÔÅ ÎÁÄÒÕËÕ×ÁÔÉ ÐÒÉ ÚÁÐÒÏÛÅÎΦ\n"
-"yaboot, ÝÏ ×ÉÂÒÁÔÉ ÃÀ ÏÐæÀ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-"  * ïÂÒÁÚ: ÃÅ - ÎÁÚ×Á ÑÄÒÁ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ. õ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× - ÃÅ\n"
-"vmlinux ÁÂÏ ×ÁÒ¦ÁÎÔÉ ÎÁÚ×É Ú Ò¦ÚÎÉÍÉ ÒÏÚÛÉÒÅÎÎÑÍÉ.\n"
-"\n"
-"  * ëÏÒÅÎÅ×Á ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ: ÐÒÉÓÔÒ¦Ê ÄÌÑ ËÏÒÅÎÅ×ϧ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ,\n"
-"ÁÂÏ '/' ×ÁÛϧ ÓÉÓÔÅÍÉ ì¦ÎÁËÓ.\n"
-"\n"
-"\n"
-"  * äÏÄÁÔÉ: ÎÁ ÁÐÁÒÁÔÎÏÍÕ ÚÁÂÅÚÐÅÞÅÎΦ Apple ÄÏÓÉÔØ ÞÁÓÔÏ\n"
-"×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ ÄÏÄÁÔËÏצ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ¦Î¦Ã¦Á̦ÚÁæ§ צÄÅÏ-ÐÌÁÔÉ ÁÂÏ\n"
-"ÄÌÑ ÔÏÇÏ, ÝÏ ¦Î¦Ã¦Á̦ÚÕ×ÁÔÉ ËÌÁצÁÔÕÒÎÕ ÅÍÕÌÑæÀ ËÌÁ×¦Û ÍÉÛËÉ, ÞÅÒÅÚ\n"
-"ÔÅ, ÝÏ ÎÁ ÓÔÁÎÄÁÒÔÎ¦Ê ÍÉÛæ Apple ÎÅÍÁ¤ 2-§ ¦ 3-§ ËÌÁצۦ. äÁ̦ ÐÏÄÁΦ\n"
-"ÄÅÑ˦ ÐÒÉËÌÁÄÉ: \n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"        video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"\n"
-"  * Initrd: ÃÅÊ ÐÁÒÁÍÅÔÒ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÍÏÄÕ̦ ÄÏ ÔÏÇÏ, ÑË ÐÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ ÄÏÓÔÕÐÎÉÊ, ÁÂÏ\n"
-"ÝÏ ÐÒÏÞÉÔÁÔÉ ×¦ÒÔÕÁÌØÎÉÊ ÄÉÓË ÄÌÑ Á×ÁÒ¦ÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÅÎÎÑ.\n"
-"\n"
-"  * òÏÚÍ¦Ò initrd: ÓÔÁÎÄÁÒÔÎÉÊ ×¦ÒÔÕÁÌØÎÉÊ ÄÉÓË ÍÁ¤ ÒÏÚÍ¦Ò 4096 ÂÁÊÔ,\n"
-"ÑËÝÏ ×ÁÍ ÐÏÔÒ¦ÂÅÎ ÄÉÓË Â¦ÌØÛÏÇÏ ÒÏÚͦÒÕ, ÍÏÖÅÔÅ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÃÉÍ\n"
-"ÐÁÒÁÍÅÔÒÏÍ.\n"
-"\n"
-"  * úÁÐÉÓ/ÞÉÔÁÎÎÑ: Ú×ÉÞÎÏ ËÏÒÅÎÅ×Á ÆÁÊÌÏ×Á ÓÉÓÔÅÍÁ ÍÏÎÔÕ¤ÔØÓÑ × ÒÅÖÉͦ\n"
-"Ô¦ÌØËÉ ÄÌÑ ÞÉÔÁÎÎÑ, ÄÌÑ ÔÏÇÏ, ÝÏ ÍÁÔÉ ÍÏÖÌÉצÓÔØ ÐÒÏ×ÅÓÔÉ ÐÅÒÅצÒËÕ\n"
-"ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ ÐÅÒÛ, Î¦Ö ÓÉÓÔÅÍÁ ÚÁ×ÁÎÔÁÖÕ¤ÔØÓÑ × ÒÏÂÏÞÉÊ ÒÅÖÉÍ. ãÅ\n"
-"ÍÏÖÎÁ צÄͦÎÉÔÉ ÔÕÔ.\n"
-"\n"
-"  * âÅÚ÷¦ÄÅÏ: Õ ×ÉÐÁÄËÕ, ËÏÌÉ ×¦ÄÅÏ ÐÌÁÔÁ Apple ×ÉÑ×ÉÔØÓÑ ÏÓÏÂÌÉ×Ï\n"
-"ÐÒÏÂÌÅÍÁÔÉÞÎÏÀ, ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÃÅÊ ÐÁÒÁÍÅÔÒ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ÓÔÁÎÄÁÒÔÎÉÍ framebuffer'ÏÍ.\n"
-"\n"
-"  * óÔÁÎÄÁÒÎÁ: ÓÉÓÔÅÍÁ ×ÉÂÒÁÎÁ × ÃØÏÍÕ ÐÕÎËÔ¦ ÚÁ×ÁÎÔÁÖÉÔØÓÑ ÚÒÁÚÕ\n"
-"ЦÓÌÑ ÔÏÇÏ, ÑË ×É ÎÁÔÉÓÎÅÔÅ ENTER ÎÁ ÚÁÐÒÏÛÅÎΦ yaboot. ãÅÊ ÐÕÎËÔ ÂÕÄÅ\n"
-"ÔÁËÏÖ ÐÏËÁÚÁÎÉÊ ÓÉÍ×ÏÌÏÍ *, ÑËÝÏ ×É ÎÁÔÉÓÎÅÔÅ TAB, ÝÏ ÐÏÄÉ×ÉÔÉÓÑ\n"
-"ÓÐÉÓÏË ÓÉÓÔÅÍ. "
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot - ÃÅ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÓÉÓÔÅÍÉ ÄÌÑ íÁ˦ÎÔÏÛ¦× îÏ×ÏÇÏ ÔÉÐÕ. ÷¦Î ÍÏÖÅ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ÂÕÄØ-ÑËÕ ¦Ú ÓÉÓÔÅÍ: GNU/Linux, MacOS, MacOSX, ÑËÝÏ ×¦Î\n"
-"×ÓÔÁÎÏ×ÌÅÎÉÊ × ÓÉÓÔÅͦ. ÷ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× Ã¦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ\n"
-"×ÉÚÎÁÞÁÀÔØÓÑ ¦ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ ÃÅ ÎÅ ÔÁË - ÍÏÖÅÔÅ ÄÏÄÁÔÉ ÐÕÎËÔ\n"
-"×ÒÕÞÎÕ ÎÁ ÃØÏÍÕ ÅËÒÁΦ. âÕÄØÔÅ Õ×ÁÖΦ ÐÒÉ ×ÉÂÏÒ¦ ËÏÒÅËÔÎÉÊ\n"
-"ÐÁÒÁÍÅÔÒ¦×. \n"
-"\n"
-"ïÓÎÏ×Φ ÐÁÒÁÍÅÔÒÉ Yaboot:\n"
-"\n"
-"   * ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ: ÐÒÏÓÔÅ ÔÅËÓÔÏ×Å ÐÏצÄÏÍÌÅÎÎÑ, ÑËÅ\n"
-"ÄÅÍÏÎÓÔÒÕ¤ÔØÓÑ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ.\n"
-"\n"
-"  * ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ: ×ËÁÚÕ¤ ÎÁ ÔÅ, ÄÅ ÓÁÍÅ ÚÁÐÉÓÕ¤ÔØÓÑ\n"
-"¦ÎÆÏÒÍÁÃ¦Ñ ÐÏÔÒ¦ÂÎÁ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ GNU/Linux. úÁÇÁÌÏÍ, ×ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÎÁÚÎÁÞÉÔÉ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ ÔÏÇÏ, ÝÏ ÚÂÅÒ¦ÇÁÔÉ ÃÀ\n"
-"¦ÎÆÏÒÍÁæÀ. \n"
-"\n"
-"  * úÁÔÒÉÍËÁ Open Firmware: ÎÁ צÄͦÎÕ ×¦Ä Lilo, ÔÕÔ ¤ Äצ Ò¦ÚÎÉÈ\n"
-"ÐÅÒ¦ÏÄÉ ÚÁÔÒÉÍËÉ × Yaboot. ðÅÒÛÉÊ ÐÅÒ¦ÏÄ ÚÁÔÒÉÍËÉ ×ÉͦÒÀ¤ÔØÓÑ ×\n"
-"ÓÅËÕÎÄÁÈ. ð¦Ä ÞÁÓ ÃØÏÇÏ ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÚצÄËÉ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ: Ú ËÏÍÐÁËÔ-ÄÉÓËÕ, OF, MacOS ÞÉ ì¦ÎÁËÓ.\n"
-"\n"
-"  * ðÅÒ¦ÏÄ ÚÁÔÒÉÍËÉ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÑÄÒÁ: ÃÅÊ ÐÅÒ¦ÏÄ ÐÏĦÂÎÉÊ ÄÏ\n"
-"ÚÁÔÒÉÍËÉ Lilo. ð¦ÓÌÑ ×ÉÂÏÒÕ ì¦ÎÁËÓÁ, ÚÁÔÒÉÍËÁ ÏÂÞÉÓÌÀ¤ÔØÓÑ × ÄÅÓÑÔÉÈ\n"
-"ÓÅËÕÎÄÉ ÐÅÒÛ, Î¦Ö ÐÏÞÎÅ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉÓÑ ÓÔÁÎÄÁÒÔÎÅ ÑÄÒÏ.\n"
-"\n"
-"  * äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú ËÏÍÐÁËÔ-ÄÉÓËÕ?: ÑËÝÏ ÃÅÊ ÐÁÒÁÍÅÔÒ\n"
-"×ÉÂÒÁÎÏ, ×É ÍÏÖÅÔÅ ÎÁÔÉÓÎÕÔÉ 'C' ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ Ð¦Ä ÞÁÓ ÐÅÒÛÏÇÏ\n"
-"ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ.\n"
-"\n"
-"  * äÏÚ×ÏÌÉÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ OF: ÑËÝÏ ×É ×ÉÂÅÒÅÔÅ ÃÅÊ ÐÁÒÁÍÅÔÒ, ×É\n"
-"ÚÍÏÖÅÔÅ ÎÁÔÉÓÎÕÔÉ 'N' Ð¦Ä ÞÁÓ ÐÅÒÛÏÇÏ ÐÅÒ¦ÏÄÕ ÚÁÔÒÉÍËÉ ÄÌÑ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú Open Firmware.\n"
-"\n"
-"  * óÔÁÎÄÁÒÔÎÁ ïó: ÃÉÍ ×É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÎÄÁÒÔÎÕ ÓÉÓÔÅÍÕ, ÑËÁ\n"
-"ÚÁ×ÁÎÔÁÖÉÔØÓÑ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÚÁ˦ÎÞÉÔØÓÑ ÚÁÔÒÉÍËÁ Open Firmware."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÖÏÒÓÔËÉÊ ÄÉÓË, ÑËÉÊ ×É ÈÏÞÅÔÅ ÐÅÒÅÆÏÒÍÁÔÕ×ÁÔÉ ÝÏ ×ÓÔÁÎÏ×ÉÔÉ\n"
-"ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ. âÕÄØÔÅ Õ×ÁÖΦ, ÏÓ˦ÌØËÉ ×Ó¦ ÄÁΦ\n"
-"ÂÕÄÕÔØ ÚÎÉÝÅΦ, ¦ צÄÎÏ×ÉÔÉ §È ÂÕÄÅ ÎÅÍÏÖÌÉ×Ï!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ëÌÁÃΦÔØ ÎÁ ËÎÏÐæ \"çÁÒÁÚÄ\", ÑËÝÏ ×É ÈÏÞÅÔÅ ÓÔÅÒÔÉ ×Ó¦ ÄÁΦ ÔÁ\n"
-"ЦÄÒÏÚĦÌÉ ÎÁ ÃØÏÍÕ ÖÏÒÓÔËÏÍÕ ÄÉÓËÕ. âÕÄØÔÅ Õ×ÁÖΦ: ЦÓÌÑ ÔÏÇÏ, ÑË ÷É\n"
-"ÎÁÔÉÓÎÅÔÅ ÎÁ \"çÁÒÁÚÄ\" ×É ÎÅ ÚÍÏÖÅÔŠצÄÎÏ×ÉÔÉ ÖÏÄΦ ÄÁΦ ÞÉ\n"
-"ЦÄÒÏÚĦÌÉ, Ñ˦ ÍÁÀÔØÓÑ ÎÁ ÃØÏÍÕ ÄÉÓËÕ, ×ËÌÀÞÁÀÞÉ ÔÁËÏÖ ¦ ÄÁΦ\n"
-"÷¦ÎÄÏ×Ó.\n"
-"\n"
-"ñËÝÏ ÷É ×ÉÒ¦ÛÉÌÉ ×¦ÄͦÎÉÔÉ ÃÀ ÏÐÅÒÁæÀ, ÎÁÔÉÓΦÔØ ËÌÁצÛÕ\n"
-"÷¦ÄͦÎÉÔÉ. ð¦ÄÒÏÚĦÌÉ ¦ ÄÁΦ ÎÁ ÄÉÓËÕ ÚÁÌÉÛÁÔØÓÑ ÂÅÚ ÚͦÎ."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"÷É ×ÉÂÒÁÌÉ ÔÁ˦(ÉÊ) ÓÅÒ×ÅÒ(É): %s\n"
-"\n"
-"㦠ÓÅÒ×ÅÒÉ ÓÔÁÎÄÁÒÔÎÏ ÁËÔÉצÚÏ×ÁΦ. äÌÑ ÎÉÈ ÎÅצÄÏͦ ΦÑ˦ ÐÒÏÂÌÅÍÉ Ú\n"
-"ÂÅÚÐÅËÏÀ, ÁÌÅ ÄÅÑ˦ ÍÏÖÕÔØ ÂÕÔÉ ×ÉÑ×ÌÅΦ. ÷ ÔÁËÏÍÕ ×ÉÐÁÄËÕ ×É ÐÏ×ÉÎΦ\n"
-"ÑËÏÍÏÇÁ Û×ÉÄÛÅ ÐÏÎÏ×ÉÔÉ ×ÅÒÓ¦§ ÃÉÈ ÓÅÒ×ÅÒ¦×. \n"
-"\n"
-"÷É ÈÏÞÅÔÅ ÄÏÚ×ÏÌÉÔÉ ÕÓÔÁÎÏ×ËÕ ÃÉÈ ÓÅÒ×ÅÒ¦×?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "îÅ ÍÏÖÕ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÔÒÁÎÓÌÑæÀ ÂÅÚ NIS ÄÏÍÅÎÕ"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ×¦ÄÆÏÒÍÁÔÏ×ÁÎÕ Õ FAT × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "ãÑ ÄÉÓËÅÔÁ ΊצÄÆÏÒÍÁÔÏ×ÁÎÁ ÑË FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÚÁÐÉÓÁΦ ×ÉÂÒÁΦ ÐÁËÅÔÉ, ÚÁ×ÁÎÔÁÖÔÅ\n"
-"ÓÉÓÔÅÍÕ Ú ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÞÉÔÁÎΦ ÆÁÊÌÁ %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"äÅÑ˦ Ú ÁÐÁÒÁÔÎÉÈ ÚÁÓÏÂ¦× ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ×ÉÍÁÇÁÀÔØ ÄÒÁÊ×ÅÒ¦×\n"
-"ƦÒÍ-×ÉÇÏÔÏ×ÌÀ×ÁÞ¦× ÄÌÑ ÔÏÇÏ, ÝÏ ÐÒÁÃÀ×ÁÔÉ ×¦ÒÎÏ. \n"
-"\n"
-"÷É ÍÏÖÅÔÅ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÕ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÎÉÈ ÎÁ: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì root.\n"
-"äÌÑ ÃØÏÇÏ ÓÔ×ÏÒ¦ÔØ ÎÏ×ÉÊ Ð¦ÄÒÏÚÄ¦Ì (ÁÂÏ ËÌÁÃΦÔØ ÎÁ ×ÖÅ\n"
-"¦ÓÎÕÀÞÏÍÕ). ð¦ÓÌÑ ÃØÏÇÏ ×ÉÂÅÒ¦ÔØ ``ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ'' ¦ ×ÓÔÁÎÏצÔØ §§\n"
-"× `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÌÑ Ó×ÏÐ "
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"÷É ÎÅ ÍÁ¤ÔŠЦÄÒÏÚĦÌÕ ÄÌÑ Ó×ÏЦÎÇÕ\n"
-"\n"
-"÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ? "
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "÷É ÐÏ×ÉÎΦ ÍÁÔÉ FAT ЦÄÒÏÚÄ¦Ì ÚÍÏÎÔÏ×ÁÎÉÊ × /boot/efi "
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "îÅÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÎÏ×ÉÈ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ¦ÓÎÕÀÞÉÍ Ð¦ÄÒÏÚĦÌÏÍ"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "îÅÍÁ¤ ¦ÓÎÕÀÞÉÈ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ð¦ÄÒÏÚÄ¦Ì Windows ÄÌÑ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ñËÉÊ Ð¦ÄÒÏÚÄ¦Ì ×É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚͦÒÉ"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "òÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ root × íÂ:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "òÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ ÄÌÑ Ó×ÏЦÎÇÕ × íÂ: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÌØÎÉÊ ÐÒÏÓÔ¦Ò ÎÁ ЦÄÒÏÚĦ̦ Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "òÏÚÍ¦Ò ÑËÏÇÏ Ð¦ÄÒÏÚĦÌÕ ×É ÈÏÞÅÔÅ ÚͦÎÉÔÉ?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "ïÂÞÉÓÌÀÀ ÍÅÖ¦ ЦÄÒÏÚĦÌÕ Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"ðÒÏÇÒÁÍÁ ÚͦÎÉ ÒÏÚͦÒÕ Ð¦ÄÒÏÚĦÌÕ FAT ÎÅ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÷ÁÛÉÍ\n"
-"ЦÄÒÏÚĦÌÏÍ, ÐÒÉ ÒÏÂÏÔ¦ ÓÔÁÌÁÓÑ ÔÁËÁ ÐÏÍÉÌËÁ: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"ð¦ÄÒÏÚÄ¦Ì Ú Windows ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ÚÁÎÁÄÔÏ\n"
-"ÆÒÁ­ÍÅÎÔÏ×ÁÎÉÊ. ÷ÉËÏÎÁÊÔÅ ÄÅ-ÆÒÁ­ÍÅÎÔÁæÀ \n"
-"ÓÐÏÞÁÔËÕ (ËÏÍÁÎÄÁ ``defarg'')."
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"õ÷áçá!\n"
-"\n"
-"úÁÒÁÚ DrakX ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÒÏÚÍ¦Ò Ð¦ÄÒÏÚĦÌÕ ¦Ú Windows. ïÂÅÒÅÖÎÏ:\n"
-"ÃÑ ÏÐÅÒÁÃ¦Ñ ÎÅÂÅÚÐÅÞÎÁ. ñËÝÏ ×É ÝÅ ÃØÏÇÏ ÎÅ ÚÒÏÂÉÌÉ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÚÁÒÁÚ ÐÒÉÐÉÎÉÔÕ ÕÓÔÁÎÏ×ËÕ, ÓËÏÒÉÓÔÁÔÉÓÑ ÐÒÏÇÒÁÍÏÀ scandisk Ú Windows\n"
-"(Á ËÒ¦Í ÔÏÇÏ, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÄÅÆÒÁÇÍÅÎÔÕ×ÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÚÁ ÄÏÐÏÍÏÇÏÀ\n"
-"defrag) ÎÁ ÃØÏÍÕ Ð¦ÄÒÏÚĦ̦ ÔÁ ÚÒÏÂÉÔÉ ÒÅÚÅÒ×ÎÕ ËÏЦÀ ÷ÁÛÉÈ ÄÁÎÉÈ.\n"
-"ëÏÌÉ ×ÓÅ ÃÅ ÚÒÏÂÌÅÎÏ - ÎÁÔÉÓΦÔØ çÁÒÁÚÄ."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "ñËÉÊ ÒÏÚÍ¦Ò ×É ÈÏÞÅÔÅ ÚÁÌÉÛÉÔÉ ÄÌÑ Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "ЦÄÒÏÚÄ¦Ì %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ÚͦÎÁ ÒÏÚͦÒÕ FAT ÎÅ ÓÐÒÁÃÀ×ÁÌÁ: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"îÅÍÁ¤ ЦÄÒÏÚĦÌÕ FAT ÄÌÑ ÚͦÎÉ ÒÏÚͦÒÕ ÁÂÏ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ ÑË ÐÒÉÓÔÒ¦Ê "
-"Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ (ÁÂÏ ÎÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "óÔÅÒÔÉ ×ÅÓØ ÄÉÓË"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "óÔÅÒÔÉ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "õ ÷ÁÓ Â¦ÌØÛÅ ÏÄÎÏÇÏ ÄÉÓËÕ. îÁ ÑËÉÊ Ú ÎÉÈ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ì¦ÎÁËÓ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "÷ó¶ ¦ÓÎÕÀÞ¦ ЦÄÒÏÚĦÌÉ ÔÁ ×Ó¦ ÄÁΦ ÎÁ ÄÉÓËÕ %s ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "óÐÅæÁÌØÎÉÊ ÒÏÚÐÏÄ¦Ì ÄÉÓËÕ"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÒÏÚÂÉÔÉ ÎÁ ЦÄÒÏÚĦÌÉ ÷ÁÛ ÄÉÓË %s.\n"
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ×É ÚÁ˦ÎÞÉÔÅ ÎÅ ÚÁÂÕÄØÔÅ ×ÉËÏÎÁÔÉ ËÏÍÁÎÄÕ `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "îÁ ЦÄÒÏÚĦ̦ Ú ÓÉÓÔÅÍÏÀ Windows ÎÅ ×ÉÓÔÁÞÁ¤ ÐÒÏÓÔÏÒÕ"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ×¦ÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "ðÏͦÞÎÉË ÒÏÚÂÉ×ËÉ ÎÁ ЦÄÒÏÚĦÌÉ DrakX ÚÎÁÊÛÏ× ÔÁ˦ ÍÏÖÌÉצ Ò¦ÛÅÎÎÑ:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "òÏÚÂÉÔÔÑ ÎÁ  ЦÄÒÏÚĦÌÉ ÎÅ×ÄÁÌÅ: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "÷ÍÉËÁÀ ÍÅÒÅÖÕ"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"óÔÁÌÁÓÑ ÐÏÍÉÌËÁ, ÁÌÅ Ñ ÎÅ ÚÎÁÀ, ÑË Ú ÎÅÀ ÐÏ×ÏÄÉÔÉÓÑ.\n"
-"ðÒÏÄÏ×ÖÕÊÔÅ ÎÁ Ó×¦Ê ×ÌÁÓÎÉÊ ÒÉÚÉË."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "ðÏÄצÊΦ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"äÅÑ˦ ×ÁÖÌÉצ ÐÁËÅÔÉ ÎÅ ÚÍÏÇÌÉ ×¦ÒÎÏ ×ÓÔÁÎÏ×ÉÔÉÓÑ.  áÂÏ ÷ÁÛ\n"
-"ËÏÍÐÁËÔ-ÄÉÓË ÁÂÏ ÐÒÉ×¦Ä ÄÅÆÅËÔΦ.  ðÅÒÅצÒÔÅ ËÏÍÐÁËÔ ÄÉÓË ÎÁ\n"
-"×ÓÔÁÎÏ×ÌÅÎÏÍÕ ËÏÍÐ'ÀÔÅÒ¦ ËÏÍÁÎÄÏÀ \"rpm -qpl \" \"Mandrake/RPMS/*.rpm\" \n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "îÅÍÁ¤ ÐÒÉ×ÏÄÁ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ðÏÞÉÎÁ¤ÔØÓÑ ËÒÏË `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"÷ÁÛÁ ÓÉÓÔÅÍÁ ÍÁ¤ ÚÁÍÁÌÏ ÒÅÓÕÒÓ¦×. ÷É ÍÏÖÅÔÅ ÍÁÔÉ ÐÒÏÂÌÅÍÉ Ú ÕÓÔÁÎÏ×ËÏÀ\n"
-"Mandrake ì¦ÎÁËÓÁ. ñËÝÏ ÃÅ ÓÔÁÎÅÔØÓÑ, ×É ÍÏÖÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ÕÓÔÁÎÏ×ËÕ ×\n"
-"ÔÅËÓÔÏ×ÏÍÕ ÒÅÖÉͦ. äÌÑ ÃØÏÇÏ Ð¦Ä ÞÁÓ ÚÁ×ÁÎÔÁÖÅÎÎÑ ËÏÍÐÁËÔ-ÄÉÓËÕ\n"
-"ÎÁÔÉÓΦÔØ F1 ¦ ÐÏÔ¦Í ××ÅĦÔØ \"text\"."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "ëÌÁÓ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "âÕÄØ-ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÏÄÉÎ Ú ÐÏÄÁÎÉÈ ËÌÁÓ¦× ÕÓÔÁÎÏ×ËÉ:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "úÁÇÁÌØÎÉÊ ÒÏÚÍ¦Ò ×ÉÂÒÁÎϧ ÷ÁÍÉ ÇÒÕÐÉ ÂÌÉÚØËÏ %d íÂ.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ñËÝÏ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÍÅÎÛÅ, Î¦Ö ÃÅÊ ÒÏÚͦÒ, ×ÉÂÅÒ¦ÔØ ÒÏÚÍ¦Ò Õ\n"
-"צÄÓÏÔËÁÈ ÔÉÈ ÐÁËÅÔ¦×, ÝÏ ×É ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÉÔÉ.\n"
-"\n"
-"ñËÝÏ ×É ×ÉÂÅÒÅÔÅ ÍÁÌÅ ÞÉÓÌÏ, Ô¦ÌØËÉ ÐÁËÅÔÉ, ÂÅÚ ÑËÉÈ ÎÅ ÍÏÖÎÁ ϦÊÔÉÓÑ\n"
-"ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ. ðÒÉ ×ÉÂÏÒ¦ 100% ÂÕÄÅ ×ÓÔÁÎÏ×ÌÅÎÏ ×ÓÅ ×ÉÂÒÁÎÅ."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"îÁ ÷ÁÛÏÍÕ ÄÉÓËÕ ×ÉÓÔÁÞÁ¤ ͦÓÃÑ Ô¦ÌØËÉ ÄÌÑ %d%% ÃÉÈ ÐÁËÅÔ¦×.\n"
-"\n"
-"ñËÝÏ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÍÅÎÛÅ, Î¦Ö ÃÅ, ×ÉÂÅÒ¦ÔØ ÞÉÓÌÏ Õ ×¦ÄÓÏÔËÁÈ\n"
-"×¦Ä ÒÏÚͦÒÕ ÐÁËÅÔ¦× ÄÌÑ ÕÓÔÁÎÏ×ËÉ. ñËÝÏ ×É ×ÉÂÅÒÅÔÅ ÍÁÌÅ ÞÉÓÌÏ, Ô¦ÌØËÉ\n"
-"ÐÁËÅÔÉ, ÂÅÚ ÑËÉÈ ÎÅ ÍÏÖÎÁ ϦÊÔÉÓÑ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ. ðÒÉ ×ÉÂÏÒ¦\n"
-"%d%% ÂÕÄÅ ×ÓÔÁÎÏ×ÌÅÎÏ ÍÁËÓÉÍÁÌØÎÏ ÍÏÖÌÉ×Å ÞÉÓÌÏ ÐÁËÅÔ¦×."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "â¦ÌØÛ ÔÏÞÎÏ ÍÏÖÎÁ ÂÕÄÅ ×ÉÂÒÁÔÉ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÒÏæ"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "ðÒÏÃÅÎÔΦ צÄÎÏÛÅÎÎÑ ÐÁËÅÔ¦× ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "÷ÉÂ¦Ò ÇÒÕÐ ÐÁËÅÔ¦×"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "¶ÎÄÉצÄÕÌØÎÉÊ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "úÁÇÁÌØÎÉÊ ÒÏÚͦÒ: %d / %d í "
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "ðÁËÅÔÉ ÎÅÒÏÂÏÞ¦"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "îÁÚ×Á: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "÷ÅÒÓ¦Ñ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "òÏÚͦÒ: %d ëâ\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "÷ÁÖÌÉצÓÔØ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "÷ÉÂÒÁÔÉ ÃÅÊ ÐÁËÅÔ ÎÅÍÏÖÌÉ×Ï. äÌÑ ÊÏÇÏ ÕÓÔÁÎÏ×ËÉ ÎÅ ×ÉÓÔÁÞÁ¤ ͦÓÃÑ."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅÎÉÍÉ"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ÄŦÎÓÔÁÌØÏ×ÁÎÉÍÉ"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "îÅ ÍÏÖÎÁ ×ÉÂÒÁÔÉ ÁÂÏ ×¦ÄͦÎÉÔÉ ×ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "ãÅÊ ÐÁËÅÔ ÎÅÏÂȦÄÎÉÊ. îÅ ÍÏÖÎÁ צÄͦÎÉÔÉ ÊÏÇÏ ×ɦÒ"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. êÏÇÏ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÏ."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"ãÅÊ ÐÁËÅÔ ÐÏ×ÉÎÅÎ ÂÕÔÉ ÐÏÎÏ×ÌÅÎÉÊ\n"
-"÷É ÓÐÒÁ×Ħ ÈÏÞÅÔŠצÄͦÎÉÔÉ ÊÏÇÏ ×ɦÒ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "÷ÉÂ¦Ò ÃØÏÇÏ ÐÁËÅÔÕ ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ. ÷¦Î ÐÏ×ÉÎÅÎ ÂÕÔÉ ÐÏÎÏ×ÌÅÎÉÊ."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "ðÏËÁÚÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÂÒÁΦ ÐÁËÅÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "ðÒÏÞÉÔÁÔÉ/ÚÁÐÉÓÁÔÉ Ú/ÎÁ ÄÉÓËÅÔÕ"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "í¦Î¦ÍÁÌØÎÁ ÕÓÔÁÎÏ×ËÁ"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "îÁÂÌÉÖÅÎÅ ÏÂÞÉÓÌÅÎÎÑ"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "úÁÌÉÛÏË ÞÁÓÕ "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "úÁÞÅËÁÊÔÅ, ¦ÄŠЦÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ÐÁËÅÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "ðÒÉÊÎÑÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "÷¦ÄËÉÎÕÔÉ"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"úͦΦÔØ ËÏÍÐÁËÔ-ÄÉÓË!\n"
-"\n"
-"âÕÄØ-ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\" Õ ÐÒÉÓÔÒ¦Ê ¦\n"
-"ÎÁÔÉÓΦÔØ çÁÒÁÚÄ Ð¦ÓÌÑ ÃØÏÇÏ.\n"
-"\n"
-"ñËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÔÁËÏÇÏ ÄÉÓËÕ, ÎÁÔÉÓΦÔØ ÷¦ÄͦÎÉÔÉ, ÝÏ ÎÅ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ú ÃØÏÇÏ ÄÉÓËÕ."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "÷ÓÅ-ÔÁËÉ ÐÒÏÄÏ×ÖÕ×ÁÔÉ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÓÏÒÔÕ×ÁÎÎÑ ÐÁËÅÔ¦×: "
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ Ð¦Ä ÞÁÓ ÕÓÔÁÎÏ×ËÉ ÐÁËÅÔ¦×: "
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"âÕÄØ ÌÁÓËÁ, Õ×ÁÖÎÏ ÐÒÏÞÉÔÁÊÔÅ ÕÍÏ×É ÐÏÄÁΦ ÄÁ̦. ñËÝÏ ×É ÎÅ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÂÕÄØ-ÑËÏÀ ÞÁÓÔÉÎÏÀ, ×ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ\n"
-"ÎÁÓÔÕÐÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË. îÁÔÉÓΦÔØ ÎÁ ÷¦ÄÍÏ×ÉÔÉÓÑ ÄÌÑ ÔÏÇÏ, ÝÏÂ\n"
-"ÐÒÏÄÏ×ÖÉÔÉ ÕÓÔÁÎÏ×ËÕ ÂÅÚ ×ÉËÏÒÉÓÔÁÎÎÑ ÃØÏÇÏ ÎÏÓ¦Ñ.\n"
-"\n"
-"äÅÑ˦ ËÏÍÐÏÎÅÎÔÉ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÏÍÐÁËÔ-ÄÉÓËÕ ÎÅ ËÅÒÕÀÔØÓÑ Ì¦ÃÅÎÚ¦¤À\n"
-"GPL ÞÉ ÐÏĦÂÎÏÀ ÄÏ Îŧ. ÷ ÔÁËÏÍÕ ×ÉÐÁÄËÕ ËÏÖÅÎ ¦Ú ËÏÍÐÏÎÅÎÔ¦×\n"
-"ËÅÒÕ¤ÔØÓÑ Ó×ϤÀ ÓÐÅÃÉƦÞÎÏÀ ̦ÃÅÎÚ¦¤À. âÕÄØ ÌÁÓËÁ, ÐÒÏÞÉÔÁÊÔÅ Õ×ÁÖÎÏ ¦\n"
-"ÄÏÔÒÉÍÕÊÔÅÓØ ÕÍÏ× ÔÁËϧ ÓÐÅÃÉƦÞÎϧ ̦ÃÅÎÚ¦§ ÐÅÒÛ, Î¦Ö ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÁÂÏ ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÕ×ÁÔÉ ÔÁËÕ ËÏÍÐÏÎÅÎÔÕ. ôÁ˦ ̦ÃÅÎÚ¦§ Õ Â¦ÌØÛÏÓÔ¦\n"
-"×ÉÐÁÄË¦× ÚÁÂÏÒÏÎÑÀÔØ ÐÅÒÅÄÁÞÕ, ËÏЦÀ×ÁÎÎÑ (ËÒ¦Í ÓÔ×ÏÒÅÎÎÑ ÒÅÚÅÒ×Îϧ\n"
-"ËÏЦ§), ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ, Ú×ÏÒÏÔÎÀ ¦ÎÖÅÎÅÒ¦À, ÄÅ-ÁÓÅÍÂÌÀ×ÁÎÎÑ,\n"
-"ÄÅ-ËÏÍЦÌÑæÀ ÞÉ ÍÏÄÉƦËÁæÀ ËÏÍÐÏÎÅÎÔÉ. âÕÄØ-ÑËÅ ÐÏÒÕÛÅÎÎÑ Ì¦ÃÅÎÚ¦§\n"
-"ÎÅÇÁÊÎÏ ÐÒÉÐÉÎѤ ×ÁÛ¦ ÐÒÁ×Á ÝÏÄÏ ËÏÍÐÏÎÅÎÔÉ. ñËÝÏ ÓÐÅÃÉƦÞÎÏ ÎÅ\n"
-"×ËÁÚÁÎÏ ÐÒÏ ÎÁÄÁÎÎÑ ÔÁËÉÈ ÐÒÁ×, ×É ÎÅ ÍÁ¤ÔÅ ÐÒÁ×Á ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ã¦\n"
-"ÐÒÏÇÒÁÍÉ ÎÁ ¦ÌØÛ, Î¦Ö ÏÄÎ¦Ê ÓÉÓÔÅͦ, ÁÂÏ ÐÒÉÓÔÏÓÏ×Õ×ÁÔÉ §È ÄÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ × ÍÅÒÅÖ¦. ñËÝÏ ×É ÍÁ¤ÔÅ ÓÕÍΦ×É ÝÏÄÏ Ì¦ÃÅÎÚ¦§, Ú×ÅÒΦÔØÓÑ\n"
-"ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ ÄÉÓÔÒÉÂ'ÀÔÏÒÁ ÞÉ ÒÅÄÁËÔÏÒÁ ÔÁËϧ ËÏÍÐÏÎÅÎÔÉ. ðÅÒÅÄÁÞÁ\n"
-"ÔÁËÉÈ ËÏÍÐÏÎÅÎÔ (×ËÌÀÞÁÀÞÉ ÄÏËÕÍÅÎÔÁæÀ) ÔÒÅÔ¦Í ÏÓÏÂÁÍ Õ Â¦ÌØÛÏÓÔ¦\n"
-"×ÉÐÁÄË¦× ÚÁÂÏÒÏÎÅÎÁ. \n"
-"\n"
-"÷Ó¦ Á×ÔÏÒÓØ˦ ÐÒÁ×Á ËÏÍÐÏÎÅÎÔ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ËÏÍÐÁËÔ-ÄÉÓËÕ ÚÁÓÔÅÒÅÖÅΦ\n"
-"ÚÁ §È צÄÐÏצÄÎÉÍÉ Á×ÔÏÒÁÍÉ ¦ ÚÁÈÉÝÁÀÔØÓÑ ÚÁËÏÎÁÍÉ ÐÒÏ ÏÈÏÒÏÎÕ\n"
-"Á×ÔÏÒÓØËÉÈ ÐÒÁ×, Ñ˦ ÍÁÀÔØ ÐÒÁ×Ï ÚÁÓÔÏÓÏ×Õ×ÁÔÉÓÑ ÄÏ ÐÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦×.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "óÔÁÌÁÓÑ ÐÏÍÉÌËÁ"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ \"%s\"?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "ì¦ÃÅÎÚ¦ÊÎÁ ÕÍÏ×Á"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"÷ÓÔÕÐ\n"
-"\n"
-"ïÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ ÔÁ Ò¦ÚÎÏÍÁΦÔΦ ËÏÍÐÏÎÅÎÔÉ, ÝÏ ÍÁÀÔØÓÑ ×\n"
-"ÄÉÓÔÒÉÂÕÔÉצ ì¦ÎÁËÓ íÁÎÄÒÅÊË ÎÁÄÁ̦ ÍÁÀÔØ Ú×ÁÔÉÓÑ \"ðÒÏÇÒÁÍΦ\n"
-"ÐÒÏÄÕËÔÉ\". ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ×ËÌÀÞÁÀÔØ ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÔØÓÑ ÎÁÂÏÒÁÍÉ\n"
-"ÐÒÏÇÒÁÍ, ÍÅÔÏÄ¦× ÐÒÁ×ÉÌ ÔÁ ÄÏËÕÍÅÎÔÁæ¤À, ÑËÁ ÍÁ¤ צÄÎÏÛÅÎÎÑ ÄÏ\n"
-"ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ ÔÁ Ò¦ÚÎÏÍÁΦÔÎÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ ÄÉÓÔÒÉÂÕÔÉ×Á\n"
-"ì¦ÎÁËÓ íÁÎÄÒÅÊËÁ.\n"
-"\n"
-"1. ì¦ÃÅÎÚ¦ÊÎÁ ÕÇÏÄÁ\n"
-"\n"
-"âÕÄØ ÌÁÓËÁ, ÐÒÏÞÉÔÁÊÔÅ ÃÀ ÕÇÏÄÕ Õ×ÁÖÎÏ. ãÅÊ ÄÏËÕÍÅÎÔ ¤ ̦ÃÅÎÚ¦ÊÎÏÀ\n"
-"ÕÇÏÄÏÀ Í¦Ö ÷ÁÍÉ ÔÁ MandrakeSoft S.A., ÑËÁ ÓÔÏÓÕ¤ÔØÓÑ ÐÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦×. ÷ÓÔÁÎÏ×ÌÅÎÎÑÍ, ÄÕÂÌÀ×ÁÎÎÑÍ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑÍ ðÒÏÇÒÁÍÎÉÈ\n"
-"ÐÒÏÄÕËÔ¦× ÂÕÄØ-ÑËÉÍ ÞÉÎÏÍ, ÷É ÔÉÍ ÓÁÍÉÍ Ñ×ÎÏ ÐÒÉÊÍÁ¤ÔÅ ÎÁ ÐÏ×ΦÓÔÀ\n"
-"ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÕÍÏ×ÁÍÉ ÄÁÎϧ ì¦ÃÅÎÚ¦§. ñËÝÏ ÷É ÎÅ ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú\n"
-"ÂÕÄØ-ÑËÏÀ ÞÁÓÔÉÎÏÀ ì¦ÃÅÎÚ¦ÊÎϧ ÕÇÏÄÉ, ÷ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ, ÄÕÂÌÀ×ÁÔÉ ÞÉ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ðÒÏÇÒÁÍÎÉÍ\n"
-"ÐÒÏÄÕËÔÏÍ. âÕÄØ-ÑËÁ ÓÐÒÏÂÁ ×ÓÔÁÎÏ×ÌÅÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑ\n"
-"ðÒÏÇÒÁÍÎÏÇÏ ÐÒÏÄÕËÔÕ ÞÉÎÏÍ, ÑËÉÊ ÎŠצÄÐÏצÄÁ¤ ÕÍÏ×ÁÍ õÇÏÄÉ ×ÉÚÎÁ¤ÔØÓÑ\n"
-"ÐÏÒÕÛÅÎÎÑÍ õÇÏÄÉ ¦, ÔÉÍ ÓÁÍÉÍ ÷É ÐÏÚÂÁ×ÌѤÔÅÓØ ÐÒÁ× ÚÁ æ¤À\n"
-"õÇÏÄÏÀ. ð¦ÓÌÑ ÐÒÉÐÉÎÅÎÎÑ Ä¦§ 椧 õÇÏÄÉ, ÷É ÐÏ×ÉÎΦ ÎÅÇÁÊÎÏ ÚÎÉÝÉÔÉ\n"
-"×Ó¦ ËÏЦ§ ðÒÏÇÒÁÍÎÉÈ ðÒÏÄÕËÔ¦×.\n"
-"\n"
-"2. ïÂÍÅÖÅÎÁ ÇÁÒÁÎÔ¦Ñ\n"
-"\n"
-"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÔÁ ÄÏÐÏ×ÎÀÀÞÁ ÄÏËÕÍÅÎÔÁÃ¦Ñ ÐÏÓÔÁ×ÌÑÀÔØÓÑ \"ÑË ¤\",\n"
-"ÂÅÚ ÇÁÒÁÎÔ¦§, × ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ. î¦ ÚÁ ÑËÉÈ ÕÍÏ×\n"
-"MandrakeSoft S.A. ÎÅ ÂÕÄÅ ÎÅÓÔÉ ×¦ÄÐÏצÄÁÌØÎÏÓÔ¦, × ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ\n"
-"ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ, ÚÁ ×ÉÐÁÄËÏצ, ÐÒÑͦ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁΦ ( ×ËÌÀÞÁÀÞÉ ÁÌÅ\n"
-"ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ×ÔÒÁÔÁÍÉ ÞÉ ÐÅÒÅÐÉÎÁÍÉ Â¦ÚÎÅÓÕ, ƦÎÁÎÓÏ×ÉÍÉ ×ÔÒÁÔÁÍÉ,\n"
-"ÁÄ×ÏËÁÔÓØËÉÍÉ ×ÉÔÒÁÔÁÍÉ ÞÉ ÛÔÒÁÆÁÍÉ, ÑË ÒÅÚÕÌØÔÁÔ ÐÒÉÓÕÄÕ ÓÕÄÏ×ϧ\n"
-"¦ÎÓÔÁÎæ§, ÞÉ ÂÕÄØ-Ñ˦ ¦ÎÛ¦ ×ÔÒÁÔÉ), ÝÏ ÐÏÈÏÄÑÔØ ×¦Ä ×ÉËÏÒÉÓÔÁÎÎÑ,\n"
-"ÁÂÏ, ÎÁ×ÐÁËÉ, ×¦Ä ÎÅÍÏÖÌÉ×ÏÓÔ¦ ×ÉËÏÒÉÓÔÁÎÎÑ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ, ÎÁצÔØ\n"
-"Õ ×ÉÐÁÄËÕ, ÑËÝÏ MandrakeSoft S.A. ÐÏצÄÏÍÌÑÌÏÓÑ ÐÒÏ ÍÏÖÌÉ×ÏÓÔ¦ ÔÁËÉÈ\n"
-"×ÔÒÁÔ.\n"
-"\n"
-"ïâíåöåîîñ ÷¶äðï÷¶äáìøîïóô¶, úáìåöîï· ÷¶ä ïâìáäáîîñ áâï ÷éëïòéóôáîîñ\n"
-"úáâïòïîåîéè ðòïçòáíîéè ðòïäõëô¶÷ ÷ äåñëéè ëòá·îáè\n"
-"\n"
-"÷ ÍÅÖÁÈ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ, MandrakeSoft S.A. ÞÉ ÊÏÇÏ\n"
-"ÄÉÓÔÒÉÂÀÔÏÒÉ Î¦ ÚÁ ÑËÉÈ ÕÍÏ× ÎÅ ÎÅÓÕÔØ ×¦ÄÐÏצÄÁÌØÎÏÓÔ¦ ÚÁ ÖÏÄÎÅ\n"
-"ÎÁ×ÍÉÓÎÅ, ×ÉÐÁÄËÏ×Å, ÐÒÑÍÅ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁÎÅ ÐÏÛËÏÄÖÅÎÎÑ, (×ËÌÀÞÁÀÞÉ\n"
-"ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ÐÅÒÅÛËÏÄÁÍÉ ÄÌÑ Â¦ÚÎÅÓÕ, ÐÒÉÐÉÎÅÎÎÑÍ Â¦ÚÎÅÓÕ,\n"
-"ƦÎÁÎÓÏ×ÉÍÉ ×ÔÒÁÔÁÍÉ, ÁÄ×ÏËÁÔÓØËÉÍÉ ×ÉÔÒÁÔÁÍÉ ÞÉ ÛÔÒÁÆÁÍÉ, ÑË\n"
-"ÒÅÚÕÌØÔÁÔ ÐÒÉÓÕÄÕ ÓÕÄÏ×ϧ ¦ÎÓÔÁÎæ§, ÞÉ ÂÕÄØ-ÑËÉÍÉ ¦ÎÛÉÍ ×ÔÒÁÔÁÍÉ),\n"
-"Ñ˦ ×ÉÎÉËÁÀÔØ ×¦Ä ÏÂÌÁÄÁÎÎÑ ÞÉ ×ÉËÏÒÉÓÔÁÎÎÑ ÐÒÏÇÒÁÍÎÉÈ ËÏÍÐÏÎÅÎÔ ÞÉ\n"
-"×ÉÎÉËÁÀÔØ ×¦Ä ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÏÒÏÎÅÎÉÈ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ ÞÉ ÏÂÍÅÖÅÎÉÈ ÄÏ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ × ÄÅÑËÉÈ ËÒÁ§ÎÁÈ ÐÒÏÇÒÁÍÎÉÈ ËÏÍÐÏÎÅÎÔ ÐÏ ÍÅÒÅÖ¦ Ú ÏÄΦ¤§\n"
-"Ú ÄÏÍÁÛÎ¦È ÓÔÏÒ¦ÎÏË ì¦ÎÁËÓ íÁÎÄÒÅÊË. ãÑ ÏÂÍÅÖÅÎÁ צÄÐÏצÄÁÌØΦÓÔØ\n"
-"×ËÌÀÞÁ¤ ÔÁËÏÖ (ÁÌÅ ÎÅ ÏÂÍÅÖÕ¤ÔØÓÑ) ÔÁË Ú×ÁÎÉÍÉ ÓÉÌØÎÉÍÉ\n"
-"ËÒÉÐÔÏÇÒÁƦÞÎÉÍÉ ÍÅÔÏÄÁÍÉ, Ñ˦ ×ËÌÀÞÅΦ × ðÒÏÇÒÁÍÎÉÊ ÐÒÏÄÕËÔ.\n"
-"\n"
-"3. ì¦ÃÅÎÚ¦Ñ GPL ÔÁ ÐÏĦÂΦ\n"
-"\n"
-"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÓËÌÁÄÁÀÔØÓÑ Ú ËÏÍÐÏÎÅÎÔ, ÒÏÚÒÏÂÌÅÎÉÈ Ò¦ÚÎÉÍÉ\n"
-"ƦÚÉÞÎÉÍÉ ÞÉ ÀÒÉÄÉÞÎÉÍÉ ÏÓÏÂÁÍÉ. â¦ÌØÛ¦ÓÔØ ËÏÍÐÏÎÅÎÔ ËÅÒÕÀÔØÓÑ\n"
-"ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ ÚÁÇÁÌØÎϧ ÐÕÂ̦ÞÎϧ ̦ÃÅÎÚ¦§ GNU (GNU General\n"
-"Public Licence), ÑËÕ ÍÉ ÎÁÄÁ̦ ÂÕÄÅÍÏ ÎÁÚÉ×ÁÔÉ × ÄÁÎÏÍÕ ÄÏËÕÍÅÎÔ¦ GPL,\n"
-"ÁÂÏ ÐÏĦÂÎÉÍÉ ÄÏ ÄÁÎϧ ̦ÃÅÎÚ¦ÑÍÉ. â¦ÌØÛ¦ÓÔØ ÔÁËÉÈ Ì¦ÃÅÎÚ¦Ê â¦ÌØÛ¦ÓÔØ\n"
-"Ú ÃÉÈ Ì¦ÃÅÎÚ¦Ê ÄÏÚ×ÏÌÑÀÔØ ×ÉËÏÒÉÓÔÁÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ, ÐÒÉÊÎÑÔÔÑ ÔÁ\n"
-"ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ, Ñ˦ ×ÏÎÉ ÒÅÇÕÌÀÀÔØ. âÕÄØ-ÌÁÓËÁ,\n"
-"ÏÚÎÁÊÏÍÔÅÓØ Õ×ÁÖÎÏ Ú ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦ÊÎÉÈ ÕÍÏ× ÄÌÑ ËÏÖÎϧ\n"
-"ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ ÐÅÒÛ, Î¦Ö ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÂÕÄØ-ÑËÕ Ú\n"
-"ÞÁÓÔÉÎ. âÕÄØ-Ñ˦ ÚÁÐÉÔÁÎÎÑ ÓÔÏÓÏ×ÎÏ Ì¦ÃÅÎÚ¦§ ÎÁ ÏËÒÅÍÕ ÓËÌÁÄÏ×Õ\n"
-"ÞÁÓÔÉÎÕ ÍÁÀÔØ ÁÄÒÅÓÕ×ÁÔÉÓÑ Á×ÔÏÒÕ Ã¦¤§ ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ, Á ÎÅ ÄÏ\n"
-"MandrakeSoft. ðÒÏÇÒÁÍÉ, ÒÏÚÒÏÂÌÅΦ MandrakeSoft S.A. ËÅÒÕÀÔØÓÑ\n"
-"̦ÃÅÎÚ¦¤À GPL. äÏËÕÍÅÎÔÁæÑ, ÒÏÚÒÏÂÌÅÎÁ MandrakeSoft S.A. ËÅÒÕ¤ÔØÓÑ\n"
-"ÓÐÅæÁÌØÎÏÀ ̦ÃÅÎÚ¦¤À. ú×ÅÒΦÔØÓÑ, ÂÕÄØ-ÌÁÓËÁ, ÄÏ ÄÏËÕÍÅÎÔÁæ§ ÚÁ\n"
-"ÐÏÄÒÏÂÉÃÑÍÉ.\n"
-"\n"
-"4. ðÒÁ×Á ¦ÎÔÅÌÅËÔÕÁÌØÎϧ ×ÌÁÓÎÏÓÔ¦\n"
-"\n"
-"÷Ó¦ ÐÒÁ×Á ÎÁ ÓËÌÁÄÏצ ËÏÍÐÏÎÅÎÔÉ ðÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦× ÎÁÌÅÖÁÔØ\n"
-"צÄÐÏצÄÎÉÍ Á×ÔÏÒÁÍ ¦ ÚÁÈÉÝÅΦ ÚÁËÏÎÁÍÉ ÐÒÏ ¦ÎÔÅÌÅËÔÕÁÌØÎÕ ×ÌÁÓΦÓÔØ\n"
-"ÔÁ ÐÒÁ×Á ÎÁ ËÏЦÀ×ÁÎÎÑ, Ñ˦ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ ÄÏ ÐÒÏÇÒÁÍÎÏÇÏ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ. MandrakeSoft S.A. ÚÁÌÉÛÁ¤ ÚÁ ÓÏÂÏÀ ÐÒÁ×Ï ÚͦÎÀ×ÁÔÉ ÞÉ\n"
-"ÁÄÁÐÔÕ×ÁÔÉ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÑË × Ã¦ÌÏÍÕ, ÔÁË ¦ ÏËÒÅÍÉÍÉ ÞÁÓÔÉÎÁÍÉ Ú\n"
-"ÂÕÄØ-ÑËÏÀ ÍÅÔÏÀ ¦ ÄÌÑ ÂÕÄØ-ÑËÉÈ Ã¦ÌÅÊ. \"Mandrake\", \"Mandrake Linux\" ÔÁ\n"
-"צÄÐÏצÄΦ ÌÏÇÏÔÉÐÉ ¤ ÔÏÒǦ×ÅÌØÎÉÍÉ ÍÁÒËÁÍÉ MandarakeSoft S.A.\n"
-"\n"
-"5. úÁËÏÎÏÄÁ×ÓÔ×Ï\n"
-"\n"
-"ñËÝÏ ÂÕÄØ-ÑËÉÊ ÒÏÚÄ¦Ì Ã¦¤§ ÕÇÏÄÉ ÐÒÉÚÎÁÎÉÊ ÎÅĦÊÓÎÉÍ, ÔÁËÉÍ, ÝÏ ÎÅ\n"
-"צÄÐÏצÄÁ¤ ÚÁËÏÎÏÄÁ×ÓÔ×Õ ÞÉ ÎÅצÄÐÏצÄÎÉÍ ÝÏÄÏ ÓÕÄÏ×ϧ ÐÏÓÔÁÎÏ×É, ÃÅÊ\n"
-"ÒÏÚÄ¦Ì ÕÇÏÄÉ ×ÉÄÁÌѤÔØÓÑ Ú ÄÁÎÏÇÏ ËÏÎÔÒÁËÔÕ. ÷É ÚÁÌÉÛÁ¤ÔÅÓØ Ú×'ÑÚÁÎÉÍÉ\n"
-"¦ÎÛÉÍÉ ÓÅËæÑÍÉ Ã¦¤§ ÕÇÏÄÉ, Ñ˦ ÝÅ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ. ôÅÒͦÎÉ ÔÁ\n"
-"ÕÍÏ×É Ã¦¤§ ì¦ÃÅÎÚ¦§ ËÅÒÕÀÔØÓÑ úÁËÏÎÏÄÁ×ÓÔ×ÏÍ æÒÁÎæ§. ÷Ó¦ ÓЦÒΦ\n"
-"ÐÉÔÁÎÎÑ ÝÏÄÏ ÔÅÒÍ¦Î¦× ÔÁ ÕÍÏ× Ã¦¤§ ̦ÃÅÎÚ¦§ ÂÕÄÕÔØ ÒÏÚ×'ÑÚÕ×ÁÔÉÓÑ ÐÏ\n"
-"ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÚÁ ÍÅÖÁÍÉ ÓÕÄÏ×ÉÈ ÕÓÔÁÎÏ×. ÷ ËÒÁÊÎ¦È ×ÉÐÁÄËÁÈ ÓЦÒΦ\n"
-"ÐÉÔÁÎÎÑ ÂÕÄÕÔØ ×ÉÒ¦ÛÕ×ÁÔÉÓÑ ×¦ÄÐÏצÄÎÉÍ úÁËÏÎÎÉÍ óÕÄÏÍ ðÁÒÉÖÁ -\n"
-"æÒÁÎæÑ.\n"
-"\n"
-"ú ÂÕÄØ-ÑËÉÍÉ ÐÉÔÁÎÎÑÍÉ ÝÏÄÏ ÃØÏÇÏ ÄÏËÕÍÅÎÔÁ Ú×ÅÒÔÁÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ,\n"
-"ÄÏ MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "ëÌÁצÁÔÕÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "ôÕÔ ÎÁ×ÅÄÅÎÏ ÐÏ×ÎÉÊ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ËÌÁצÁÔÕÒ"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "ñËÉÊ ËÌÁÓ ÕÓÔÁÎÏ×ËÉ ×É ×ÉÂÉÒÁ¤ÔÅ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ/ðÏÎÏ×ÉÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "ãÅ ÕÓÔÁÎÏ×ËÁ ÞÉ ÐÏÎÏ×ÌÅÎÎÑ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "òÅËÏÍÅÎÄÏ×ÁÎÉÊ"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "åËÓÐÅÒÔ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "ðÏÎÏ×ÌÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "ðÏÒÔ ÍÉÛ¦"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÕ ÐÒɤÄÎÁÎÏ ÍÉÛÕ?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "åÍÕÌÑÃ¦Ñ ËÌÁצÛ"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "åÍÕÌÑÃ¦Ñ 2 ËÌÁצÛ"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "åÍÕÌÑÃ¦Ñ 3 ËÌÁצÛ"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "ëÏÎƦÇÕÒÕÀ ËÁÒÔËÉ PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ÎÅÍÁ¤ ЦÄÒÏÚĦ̦×"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "óËÁÎÕ×ÁÎÎÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ ÚÎÁÈÏÄÖÅÎÎÑ ÔÏÞÏË ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"îÅ ÍÏÖÕ ÐÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×, ×ÏÎÁ ÚÁÎÁÄÔÏ Ú¦ÐÓÏ×ÁÎÁ ÄÌÑ ÍÅÎÅ\n"
-":( ñ ÓÐÒÏÂÕÀ ÓÔÅÒÔÉ Ú¦ÐÓÏ×ÁΦ ЦÄÒÏÚĦÌÉ ¦ ÷ó¶ äáî¶ ÂÕÄÕÔØ\n"
-"×ÔÒÁÞÅΦ. ðÒÏÂÌÅͦ ÍÏÖÎÁ ÔÁËÏÖ ÚÁÐϦÇÔÉ, ÑËÝÏ ÚÁÂÏÒÏÎÉÔÉ DrakX\n"
-"ÚͦÎÀ×ÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×. (ÐÏÍÉÌËÁ: %s)\n"
-"\n"
-"÷É ÐÏÇÏÄÖÕ¤ÔÅÓØ ×ÔÒÁÔÉÔÉ ×Ó¦ ЦÄÒÏÚĦÌÉ?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ÎÅ ÍÏÖŠצÒÎÏ ÐÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×.\n"
-"ðÒÏÄÏ×ÖÕÊÔÅ ÎÁ Ó×¦Ê ×ÌÁÓÎÉÊ ÒÉÚÉË!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"îÅ ×ÉÓÔÁÞÁ¤ צÌØÎÏÇÏ Í¦ÓÃÑ ÄÌÑ 1íâ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÏÇÏ ÂÌÏËÕ! õÓÔÁÎÏ×ËÁ\n"
-"ÂÕÄÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉÓØ, ÁÌÅ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÂÕÄÅ ÓÔ×ÏÒÉÔÉ DiskDrake'ÏÍ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ Ð¦ÄÒÏÚÄ¦Ì "
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ Ð¦ÄÒÏÚÄ¦Ì root ÄÌÑ ÐÏÎÏ×ÌÅÎÎÑ ÓÉÓÔÅÍÉ"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "ð¦ÄÒÏÚÄ¦Ì root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "ñËÉÊ Ð¦ÄÒÏÚÄ¦Ì Õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ¤ ЦÄÒÏÚĦÌÏÍ root (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ÔÁÂÌÉÃÑ Ð¦ÄÒÏÚÄ¦Ì¦× ÂÕÌÁ ÁËÔÉצÚÏ×ÁÎÁ, ÷ÁÍ ÔÒÅÂÁ\n"
-"ÐÅÒÅ×ÁÎÔÁÖÉÔÉ ÓÉÓÔÅÍÕ"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ÷É ÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "ðÅÒÅצÒÑÔÉ Ú¦ÊΦ ÂÌÏËÉ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "æÏÒÍÁÔÕ×ÁÎÎÑ Ð¦ÄÒÏÚĦ̦×"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "óÔ×ÏÒÀÀ ÔÁ ÆÏÒÍÁÔÕÀ ÆÁÊÌ %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"îÅ ×ÉÓÔÁÞÁ¤ Ó×ÏÐ-ÐÁÍ'ÑÔ¦ ÝÏ ÚÁ˦ÎÞÉÔÉ ÕÓÔÁÎÏ×ËÕ. ú¦ÌØÛ¦ÔØ\n"
-"§§. ÂÕÄØ-ÌÁÓËÁ."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "ûÕËÁÀ ÎÁÑ×Φ ÐÁËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "ûÕËÁÀ ÐÁËÅÔÉ ÄÌÑ ÐÏÎÏ×ÌÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅ ÚÁÌÉÛÉÌÏÓØ ÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ Í¦ÓÃÑ ÄÌÑ ÕÓÔÁÎÏ×ËÉ\n"
-"ÞÉ ÐÏÎÏ×ÌÅÎÎÑ (%d > %d )"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "ðÏ×ÎÉÊ (%díÂ)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "í¦Î¦ÍÁÌØÎÉÊ (%díÂ)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "òÅËÏÍÅÎÄÏ×ÁÎÉÊ (%díÂ)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"âÕÄØ ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÚÁÐÉÓ/ÚÁ×ÁÎÔÁÖÅÎÎÑ ×ÉÂÏÒÕ ÐÁËÅÔ¦× ÎÁ ÄÉÓËÅÔÕ.\n"
-"æÏÒÍÁÔ ÄÉÓÔÅÔÉ ÔÁËÉÊ-ÖÅ, ÑË ¦ ÄÉÓËÅÔÉ auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "÷¦ÄÎÏ×ÌÀÀ Ú ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ, Ú ÚÁÐÉÓÁÎÉÍ ÓÐÉÓËÏÍ ÐÁËÅÔ¦×"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "úÁÐÉÓÁÔÉ ÎÁ ÄÉÓËÅÔÕ"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "÷ÉÂÒÁÎÉÊ ÒÏÚÍ¦Ò Â¦ÌØÛÉÊ ÚÁ ÎÁÑ×ÎÉÊ ÐÒÏÓÔ¦Ò"
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔ ÄÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "þÅËÁÊÔÅ"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ×Ó¦ ËÏÍÐÁËÔ-ÄÉÓËÉ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"çÁÒÁÚÄ\".\n"
-"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\".\n"
-"ñËÝÏ Ô¦ÌØËÉ ÄÅÑËÉÈ ËÏÍÐÁËÔ-ÄÉÓË¦× ÎÅ ×ÉÓÔÁÞÁ¤, צÄͦΦÔØ §È ×ɦÒ, ¦\n"
-"ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ЦÓÌÑ ÃØÏÇÏ.\"  "
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "ëÏÍÐÁËÔ-ÄÉÓË Ú ÅÔÉËÅÔËÏÀ \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "ð¦ÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"÷ÓÔÁÎÏ×ÌÀÀ ÐÁËÅÔ %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÓÉÓÔÅÍÎÕ ÄÉÓËÅÔÕ, ÑËÁ ×ÖÉ×ÁÌÁÓÑ × ÄÉÓËÏ×ÏĦ %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ðÏÎÏ×ÌÅÎÎÑ íÏÄÕÌ¦× × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"÷É ÍÁ¤ÔÅ ÍÏÖÌÉצÓÔØ ÚÁÒÁÚ Ú×ÁÎÔÁÖÉÔÉ ËÒÉÐÔÏÇÒÁƦÞÎÅ ÐÒÏÇÒÁÍÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ.\n"
-"\n"
-"õ÷áçá!\n"
-"\n"
-"þÅÒÅÚ ×¦ÄͦÎÎÏÓÔ¦ × ÚÁÇÁÌØÎÉÈ ÒÅËÏÍÅÎÄÁæÑÈ ÄÏ ÔÁËÏÇÏ ÔÉÐÕ ÐÒÏÇÒÁÍÎÏÇÏ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ, ÝÏ ÚÁÌÅÖÁÔØ ×¦Ä ×¦ÄͦÎÎÏÓÔÅÊ × ÀÒÉÓÄÉËæÑÈ, ËÏÒÉÓÔÕ×ÁÞ\n"
-"ÔÁ/ÁÂÏ Ë¦ÎÃÅ×ÉÊ ËÏÒÉÓÔÕ×ÁÞ ÃØÏÇÏ ÐÒÏÇÒÁÍÎÏÇÏ ÐÒÏÄÕËÔÕ ÍÁÀÔØ\n"
-"ÐÅÒÅÓצÄÞÉÔÉÓÑ, ÝÏ ÚÁËÏÎÏÄÏ×ÓÔ×Ï §§/ÊÏÇÏ ÀÒÉÓÄÉËæ§ ÄÏÚ×ÏÌÑÀÔØ §Ê/ÊÏÍÕ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ, ÚÂÅÒ¦ÇÁÔÉ ÔÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÔÁËÅ ÐÒÏÇÒÁÍÎÅ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ.\n"
-"\n"
-"äÏÄÁÔËÏ×Ï ËÏÒÉÓÔÕ×ÁÞ ÔÁ/ÁÂÏ Ë¦ÎÃÅ×ÉÊ ËÏÒÉÓÔÕ×ÁÞ ÏÓÏÂÌÉ×Ï ÍÁÀÔØ\n"
-"Ú×ÅÒÎÕÔÉ Õ×ÁÇÕ ÎÁ ÔÅ, ÝÏ ÎÅ ÐÏÒÕÛÕ×ÁÔÉ ÚÁËÏÎÏÄÁ×ÓÔ×Ï Ó×Ϥ§\n"
-"ÀÒÉÓÄÉËæ§. õ ÒÁÚ¦ ÐÏÒÕÛÅÎÎÑ ×¦ÄÐÏצÄÎÏÇÏ ÚÁËÏÎÏÄÁ×ÓÔ×Á ×ÏÎÉ ÍÏÖÕÔØ\n"
-"ÐÏÎÅÓÔÉ ÓÅÒÊÏÚÎÕ ËÒÉͦÎÁÌØÎÕ ×¦ÄÐÏצÄÁÌØΦÓÔØ ÚÁ ÃÅ.\n"
-"\n"
-"÷ ÖÏÄÎÏÍÕ ×ÉÐÁÄËÕ Î¦ Mandrakesoft, Φ ÊÏÇÏ ×ÉÒÏÂÎÉËÉ ÞÉ ÐÏÓÔÁÞÁÌØÎÉËÉ\n"
-"ÎÅ ÎÅÓÕÔØ ÖÏÄÎϧ צÄÐÏצÄÁÌØÎÏÓÔ¦ Φ ÚÁ Ñ˦ ÏÓÏÂÌÉצ, ÎÅÐÒÑͦ ÞÉ\n"
-"×ÉÐÁÄËÏצ ×ÔÒÁÔÉ (×ËÌÀÞÁÀÞÉ, ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÞÉÓØ ×ÔÒÁÔÁÍÉ ÐÒÉÂÕÔËÕ,\n"
-"ÐÅÒÅÒÉ×ÁÍÉ Õ Â¦ÚÎÅÓ¦, ×ÔÒÁÔÁÍÉ ËÏÍÅÒæÊÎÉÈ ÄÁÎÉÈ ÔÁ ¦ÎÛÉÍÉ ×ÔÒÁÔÁÍÉ, Á\n"
-"ÔÁËÏÖ ×ÉÐÌÁÔÁÍÉ ÐÏ ÓÕÄÏ×ÉÍ ÐÏÚÏ×ÁÍ), ÝÏ ×ÉÎÉËÁÀÔØ ×¦Ä ×ÉËÏÒÉÓÔÁÎÎÑ,\n"
-"×ÏÌÏĦÎÎÑ ÁÂÏ ×¦Ä Ú×ÁÎÔÁÖÅÎÎÑ ÃØÏÇÏ ÐÒÏÇÒÁÍÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎ, ÄÏ ÑËÏÇÏ\n"
-"ËÏÒÉÓÔÕ×ÁÞ ÍÁ¤ ÄÏÓÔÕРЦÓÌÑ Ð¦ÄÐÉÓÁÎÎÑ ÄÁÎÏÇÏ ÄÏÇÏ×ÏÒÕ.\n"
-"\n"
-"÷Ó¦ ÚÁÐÉÔÁÎÎÑ ÝÏÄÏ ÃØÏÇÏ ÄÏÇÏ×ÏÒÕ ÍÁÀÔØ ÎÁÐÒÁ×ÌÑÔÉÓÑ ÚÁ ÁÄÒÅÓÏÀ:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "ú×'ÑÚÕÀÓØ Ú ÓÅÒ×ÅÒÏÍ ÝÏ ÐÒÏÞÉÔÁÔÉ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ÐÁËÅÔ¦×"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "÷ÉÂÅÒ¦ÔØ ÓÅÒ×ÅÒ, Ú ÑËÏÇÏ Ú×ÁÎÔÁÖÉÔÉ ÐÁËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "ú×'ÑÚÕÀÓØ Ú ÓÅÒ×ÅÒÏÍ ÝÏ ÐÒÏÞÉÔÁÔÉ ÓÐÉÓÏË ÎÁÑ×ÎÉÈ ÐÁËÅÔ¦×"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "÷ ÑË¦Ê ÞÁÓÏ×¦Ê ÓÍÕÚ¦ ÷É ÚÎÁÈÏÄÉÔÅÓØ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "çÏÄÉÎÎÉË ×ÓÔÁÎÏ×ÌÅÎÏ × GMT (ÞÁÓ ÐÏ ½Ò¦ÎצÞÕ)?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ÓÉÎÈÒÏΦÚÁÃ¦Ñ ÞÁÓÕ (¦Ú ÚÁÓÔÏÓÕ×ÁÎÎÑÍ NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "óÅÒ×ÅÒ NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "þÉ ×É ÍÁ¤ÔÅ ¦ÎÛ¦?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "úÁÇÁÌÏÍ"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "íÉÛÁ"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "þÁÓÏ×ÉÊ ÐÏÑÓ"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ðÌÁÔÁ ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "ú×ÕËÏ×Á ÐÌÁÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "ôÅÌÅצڦÊÎÁ ÐÌÁÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "ìÏËÁÌØΦ ÆÁÊÌÉ"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÐÁÒÏÌØ root'Á"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "âÅÚ ÐÁÒÏÌÀ"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"ãÅÊ ÐÁÒÏÌØ ÚÁÎÁÄÔÏ ÐÒÏÓÔÉÊ (צΠÐÏ×ÉÎÅÎ ÂÕÔÉ ÈÏÞÁ  %d ̦ÔÅÒ ÚÁ×ÄÏ×ÖËÉ)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "á×ÔÅÎÔÉËÁæÑ"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "á×ÔÅÎÔÉËÁÃ¦Ñ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "dn ÎÁ ÏÓÎÏצLDAP "
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "óÅÒ×ÅÒ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Á×ÔÅÎÔÉËÁæÑ"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "äÏÍÅÎ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "óÅÒ×ÅÒ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"óÐÅæÁÌØÎÏ ÓÔ×ÏÒÅÎÉÊ ÄÉÓË ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÅÚÐÅÞÉÔØ ÷ÁÍ ÍÏÖÌÉצÓÔØ\n"
-"ÚÁÐÕÓËÕ ÓÉÓÔÅÍÉ ÎÅÚÁÌÅÖÎÏ ×¦Ä Ú×ÉÞÁÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ãÅ ÍÏÖÅ\n"
-"ÚÎÁÄÏÂÉÔÉÓÑ Õ ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÷É ÎÅ ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ SILO ×\n"
-"Ó×Ï§Ê ÓÉÓÔÅͦ, ÁÂÏ ËÏÌÉ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ \"ÐÅÒÅÔÉÒÁ¤\" SILO, ÁÂÏ\n"
-"ËÏÌÉ SILO ÎÅ ÐÒÁÃÀ¤ Ú ÎÏ×ÏÀ ËÏÎƦÇÕÒÁæ¤À ÁÐÁÒÁÔÎÉÈ ÚÁÓϦ×. á×ÁÒ¦ÊÎÉÊ\n"
-"ÄÉÓË ÍÏÖÅ ÔÁËÏÖ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÒÁÚÏÍ Ú Mandrake Á×ÁÒ¦ÊÎÉÍ ÄÉÓËÏÍ,\n"
-"ÝÏ ÒÏÂÉÔØ ×¦ÄÎÏ×ÌÅÎÎÑ ×¦Ä ÓÅÒÊÏÚÎÉÈ ÓÉÓÔÅÍÎÉÈ ËÒÁÈ¦× ÎÁÂÁÇÁÔÏ\n"
-"ÐÒÏÓÔ¦ÛÉÍ. \n"
-"\n"
-"ñËÝÏ ÷É ÂÁÖÁ¤ÔÅ ÓÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÄÌÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ ×ÓÔÁ×ÔÅ\n"
-"ÄÉÓËÅÔÕ × ÐÅÒÛÉÊ ÄÉÓËÏ×¦Ä ¦ ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "ðÅÒÛÁ ÄÉÓËÅÔÁ"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "äÒÕÇÉÊ ÐÒÉ×¦Ä ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "ðÒÏÐÕÓÔÉÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"óÐÅæÁÌØÎÏ ÓÔ×ÏÒÅÎÉÊ ÄÉÓË ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÚÁÂÅÚÐÅÞÉÔØ ÷ÁÍ ÍÏÖÌÉצÓÔØ\n"
-"ÚÁÐÕÓËÕ ÓÉÓÔÅÍÉ ÎÅÚÁÌÅÖÎÏ ×¦Ä Ú×ÉÞÁÊÎÏÇÏ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ãÅ ÍÏÖÅ\n"
-"ÚÎÁÄÏÂÉÔÉÓÑ Õ ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÷É ÎÅ ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ LILO (ÁÂÏ\n"
-"grub) × Ó×Ï§Ê ÓÉÓÔÅͦ, ÁÂÏ ËÏÌÉ ¦ÎÛÁ ÏÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ \"ÐÅÒÅÔÉÒÁ¤\"\n"
-"LILO, ÁÂÏ ËÏÌÉ LILO ÎÅ ÐÒÁÃÀ¤ Ú ÎÏ×ÏÀ ËÏÎƦÇÕÒÁæ¤À ÁÐÁÒÁÔÎÉÈ\n"
-"ÚÁÓϦ×. á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÍÏÖÅ ÔÁËÏÖ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÒÁÚÏÍ Ú Mandrake\n"
-"Á×ÁÒ¦ÊÎÉÍ ÄÉÓËÏÍ, ÝÏ ÒÏÂÉÔØ ×¦ÄÎÏ×ÌÅÎÎÑ ×¦Ä ÓÅÒÊÏÚÎÉÈ ÓÉÓÔÅÍÎÉÈ ËÒÁȦ×\n"
-"ÎÁÂÁÇÁÔÏ ÐÒÏÓÔ¦ÛÉÍ. þÉ ÂÁÖÁ¤ÔÅ ÷É ÓÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÉÊ ÄÉÓË ÄÌÑ Ó×Ϥ§\n"
-"ÓÉÓÔÅÍÉ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "ðÅÒÅÐÒÏÛÕÀ, ÎÅÍÁ¤ ÐÒÉ×ÏÄÕ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÐÒÉ×¦Ä ÄÉÓËÅÔÉ, ÑËÉÊ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ\n"
-"Á×ÁÒ¦ÊÎϧ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "óÔ×ÏÒÀÀ ÄÉÓËÅÔÕ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÂÌÏË"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"úÄÁ¤ÔØÓÑ Õ ÷ÁÓ ÍÁÛÉÎÁ OldWorld ÞÉ îÅצÄÏÍÁ. úÁ×ÁÎÔÁÖÕ×ÁÞ yaboot ÎÅ\n"
-"ÂÕÄÅ ÐÒÁÃÀ×ÁÔÉ Ú Ã¦¤À ÍÁÛÉÎÏÀ. õÓÔÁÎÏ×ËÁ ÂÕÄÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉÓØ, ÁÌÅ ÄÌÑ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ËÏÒÉÓÔÕ×ÁÔÉÓØ BootX."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"ðÏÍÉÌËÁ ÐÒÉ ×ÓÔÁÎÏ×ÌÅÎΦ aboot,\n"
-"ÐÏÐÒÏÂÕ×ÁÔÉ ×ÓÔÁÎÏ×ÉÔÉ ÓÉÌÏÀ, ÎÁצÔØ ÑËÝÏ ÃÅ ÒÏÚÒÕÛÉÔØ ÐÅÒÛÉÊ Ð¦ÄÒÏÚĦÌ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "÷ÓÔÁÎÏ×ÌÀÀ ÂÌÏË ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"íÏÖÌÉ×Ï ×ÁÍ ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÐÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ Õ Open Firmware ÄÌÑ\n"
-"ÔÏÇÏ, ÝÏ ÄÏÚ×ÏÌÉÔÉ ÒÏÂÏÔÕ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. ñËÝÏ ×É ÎÅ ÂÁÞÉÔÅ ÚÁÐÒÏÛÅÎÎÑ\n"
-"ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ÎÁÔÉÓΦÔØ Command-Option-O-F\n"
-"ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ¦ ××ÅĦÔØ setenv boot-device %s,\\\\:tbxi. ð¦ÓÌÑ\n"
-"ÃØÏÇÏ ÎÁÄÒÕËÕÊÔÅ shut-down. ðÒÉ ÎÁÓÔÕÐÎÏÍÕ ÚÁ×ÁÎÔÁÖÅÎΦ ×É ÐÏÂÁÞÉÔÅ\n"
-"ЦÄËÁÚËÕ ÚÁ×ÁÎÔÁÖÕ×ÁÞÁ. "
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "÷ÓÔÁ×ÔÅ ÞÉÓÔÕ ÄÉÓËÅÔÕ × ÄÉÓËÏ×¦Ä %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"äÅÑ˦ ËÒÏËÉ ÎÅ ÚÁ×ÅÒÛÅΦ.\n"
-"\n"
-"÷É Ä¦ÊÓÎÏ ÈÏÞÅÔÅ ÐÒÉÐÉÎÉÔÉ ÚÁÒÁÚ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"÷¦ÔÁÎÎÑ, ÕÓÔÁÎÏ×ËÁ ÚÁ˦ÎÞÅÎÁ.  ÷ÉÊͦÔØ Ú ÄÉÓËÏ×ÏÄ¦× ÚÁ×ÁÎÔÁÖÕ×ÁÌØΦ\n"
-"ÎÏÓ¦§ ¦ ÐÏÔ¦Í ÎÁÔÉÓΦÔØ Return ÄÌÑ ÐÅÒÅ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"\n"
-"äÌÑ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ×ÉÐÒÁ×ÌÅΦ ÐÏÍÉÌËÉ ÚÎÁÊÄÅΦ × ÃÍÊ ×ÅÒÓ¦§\n"
-"Mandrake Linux Ú×ÅÒΦÔØÓÑ ÄÏ ÒÏÚĦÌÕ Errata ÎÁ ÓÅÒ×ÅÒ¦\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"äÏצÄËÉ ÐÒÏ ËÏÎƦÇÕÒÁæÀ ÷ÁÛϧ ÓÉÓÔÅÍÉ ÐÒÉ×ÅÄÅΦ × ÐÏÓÔ-ÕÓÔÁÎÏ×ÏÞÎÏÍÕ\n"
-"ÒÏÚĦ̦ ïƦæÊÎÏÇÏ ëÅÒ¦×ÎÉÃÔ×Á ëÏÒÉÓÔÕ×ÁÞÁ Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "óÔ×ÏÒÅÎÎÑ Á×ÔÏÕÓÔÁÎÏ×ÏÞÎϧ ÄÉÓËÅÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"ñËÝÏ ÐÏÔÒ¦ÂÎÏ, Á×ÔÏÍÁÔÉÚÏ×ÁÎÁ ÕÓÔÁÎÏ×ËÁ ÍÏÖÅ ÂÕÔÉ ÐÏ×ΦÓÔÀ\n"
-"Á×ÔÏÍÁÔÉÞÎÏ. ÷ ÃØÏÍÕ ×ÉÐÁÄËÕ ÕÓÔÁÎÏ×ËÁ ÂÕÄÅ ÍÁÔÉ ÐÏ×ÎÉÊ ËÏÎÔÒÏÌØ ÎÁÄ\n"
-"×ÁÛÉÍ ÄÉÓËÏÍ!! (ôÁËÉÊ ÔÉÐ ÕÓÔÁÎÏ×ËÉ × ÏÓÎÏ×ÎÏÍÕ Ð¦ÄÈÏÄÉÔØ ÄÌÑ\n"
-"ÕÓÔÁÎÏ×ËÉ ÎÁ ¦ÎÛ¦Ê ÓÉÓÔÅͦ)\n"
-"\n"
-"íÏÖÌÉ×Ï ×É ÚÁÈÏÞÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "á×ÔÏÍÁÔÉÚÏ×ÁÎÁ"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "ðÏ×ÔÏÒÉÔÉ"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "úÂÅÒÅÇÔÉ ×ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "õÓÔÁÎÏ×ËÁ Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> Í¦Ö ÅÌÅÍÅÎÔÁÍÉ  |  <Space> ×ÉÂ¦Ò  |  <F12> ÎÁÓÔÕÐÎÉÊ ÅËÒÁÎ"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ÎÅÍÁ¤ kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "äÏÓצÄÞÅÎÉÊ"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "¶ÎÆÏÒÍÁæÑ"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "òÏÚÛÉÒÉÔÉ ÄÅÒÅ×Ï"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "óÔÉÓÎÕÔÉ ÄÅÒÅ×Ï"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "ðÅÒÅÍÉËÎÕÔÉ Í¦Ö ÐÏËÁÚÏÍ ÐÏ ÇÒÕÐÁÍ ¦ Ú×ÉÞÁÊÎÉÍ ÓÐÉÓËÏÍ"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "îÅ×ÄÁÌÉÊ ×ɦÒ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "ðÁÒÁÍÅÔÒÉ: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "þÅÓØËÁ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "î¦ÍÅÃØËÁ"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "ä×ÏÒÁËÁ"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "¶ÓÐÁÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "æ¦ÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "æÒÁÎÃÕÚØËÁ"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "îÏÒ×ÅÚØËÁ"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "ðÏÌØÓØËÁ"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "òÏÓ¦ÊÓØËÁ"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "û×ÅÄÓØËÁ"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "âÒÉÔÁÎÓØËÁ ËÌÁצÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "ëÌÁצÁÔÕÒÁ óûá"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "áÌÂÁÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÓÔÁÒÁ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÄÒÕËÁÒÓØËÁ ÍÁÛÉÎËÁ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "áÚÅÒÂÁÊÄÖÁÎÓØËÁ (ÌÁÔÉÎÁ)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "âÅÌØǦÊÓØËÁ"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "÷¦ÒÍÅÎÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "âÏÌÇÁÒÓØËÁ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "âÒÁڦ̦ÊÓØËÁ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "â¦ÌÏÒÕÓØËÁ"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "û×ÅÊÃÁÒÓØËÁ (ΦÍÅÃØËÁ ÒÏÚËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "û×ÅÊÃÁÒÓØËÁ (ÆÒÁÎÃÕÚØËÁ ÒÏÚËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "þÅÓØËÁ (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "î¦ÍÅÃØËÁ (ÂÅÚ ÍÅÒÔ×ÉÈ ËÌÁצÛ)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "äÁÔÓØËÁ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "ä×ÏÒÁËÁ (óûá)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "ä×ÏÒÁËÁ (îÏÒ×ÅÚØËÁ)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "ä×ÏÒÁËÁ (óûá)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "åÓÔÏÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "çÒÕÚÉÎÓØËÁ (ÒÏÓ¦ÊÓØËÁ ÒÏÚËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "çÒÕÚÉÎÓØËÁ (ÌÁÔÉÎÓØËÁ ÒÏÚËÌÁÄËÁ)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "çÒÅÃØËÁ"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "õÇÏÒÓØËÁ"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "èÏÒ×ÁÔÓØËÁ"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "¶ÚÒÁ§ÌØÓØËÁ"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "¶ÚÒÁ§ÌØÓØËÁ (ÆÏÎÅÔÉÞÎÁ)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "¶ÒÁÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "¶ÓÌÁÎÄÓØËÁ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "¶ÔÁ̦ÊÓØËÁ"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ñÐÏÎÓØËÁ 106 ËÌÁצÛ"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "ëÏÒÅÊÓØËÁ ËÌÁצÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "ìÁÔÉÎÏ-ÁÍÅÒÉËÁÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "ìÉÔÏ×ÓØËÁ AZERTY (ÓÔÁÒÁ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "ìÉÔÏ×ÓØËÁ AZERTY (ÎÏ×Á)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ìÉÔÏ×ÓØËÁ \"ÃÉÆÒÏ×ÉÊ ÒÑÄ\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ìÉÔÏ×ÓØËÁ \"ÆÏÎÅÔÉÞÎÁ\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "ìÁÔצÊÓØËÁ"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "íÁËÅÄÏÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "äÁÔÓØËÁ"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "ðÏÌØÓØËÁ (ÒÏÚËÌÁÄËÁ qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "ðÏÌØÓØËÁ (ÒÏÚËÌÁÄËÁ qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "ðÏÒÔÕÇÁÌØÓØËÁ"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "ëÁÎÁÄÓØËÁ (ë×ÅÂÅË)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "òÕÍÕÎÓØËÁ (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "òÕÍÕÎÓØËÁ (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "òÏÓ¦ÊÓØËÁ (ñ÷åòôé)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "óÌÏ×ÅÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "óÌÏ×ÁÃØËÁ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "óÌÏ×ÁÃØËÁ (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "óÅÒÂÓØËÁ (ËÉÒÉÌÉÃÑ)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "ôÁÂÌÉÃÑ"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "ôÁÊÓØËÁ ËÌÁצÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "ôÁÄÖÉÃØËÁ ËÌÁצÁÔÕÒÁ"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ôÕÒÅÃØËÁ (ÔÒÁÄÉæÊÎÁ \"F\" ÍÏÄÅÌØ)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ôÕÒÅÃØËÁ (ÔÒÁÄÉæÊÎÁ \"Q\" ÍÏÄÅÌØ)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "õËÒÁ§ÎÓØËÁ"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "ëÌÁצÁÔÕÒÁ óûá (ͦÖÎÁÒÏÄÎÁ)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "÷'¤ÔÎÁÍÓØËÁ \"ÃÉÆÒÏ×ÉÊ ÒÑÄ\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "àÇÏÓÌÁ×ÓØËÁ (ÌÁÔÉÎÓØËÁ)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ëÒÕÇÏצ ÔÏÞËÉ ÍÏÎÔÕ×ÁÎÎÑ %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "óÐÏÞÁÔËÕ Ú¦ÔÒ¦ÔØ ÌÏǦÞÎÉÊ ÔÏÍ\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "íÉÛÁ Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ú×ÉÞÁÊÎÉÊ ÔÉÐ PS2 ÍÉÛ¦ Ú ËÏ̦ÝÁÔËÏÍ"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "ïÄÎÏ ËÎÏÐÏÞÎÁ"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "ú×ÉÞÁÊÎÁ 2È ËÎÏÐÏÞÎÁ ÍÉÛËÁ"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "úÁÇÁÌØÎÅ"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "ëÏ̦ÝÁÔËÏ"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "ú×ÉÞÁÊÎÁ 3È ËÎÏÐÏÞÎÁ ÍÉÛËÁ"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "ôÉÐÕ Logitech CC"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "ôÉÐÕ MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, ÔÉÐ C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "ä×ÏÈ ËÎÏÐÏÞÎÁ"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "ôÒØÏÈ ËÎÏÐÏÞÎÁ"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "î¦ÞÏÇÏ"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "âÅÚ ÍÉÛËÉ"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "ýÏ ÁËÔÉצÚÕ×ÁÔÉ ÍÉÛËÕ, "
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ðïóõîøôå ëïì¶ýáôëï!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "æ¦ÎÓØËÁ"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "äÁ̦ ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ðÏÐÅÒÅÄΦÊ"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "÷ÓŠצÒÎÏ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"îÁʦÌØÛ ÐÏÛÉÒÅÎÉÊ ÓÐÏӦ Ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ adsl - ÃÅ ÚÁ ÄÏÐÏÍÏÇÏÀ\n"
-"pppoe. ïÄÎÁË, ÄÅÑ˦ Ú'¤ÄÎÁÎÎÑ ËÏÒÉÓÔÕÀÔØÓÑ Ô¦ÌØËÉ pptp, ÎÅ×ÅÌÉËÁ\n"
-"˦ÌØ˦ÓÔØ ËÏÒÉÓÔÕ¤ÔØÓÑ dhcp.  ñËÝÏ ÷É ÎÅ ÚÎÁ¤ÔÅ ÎÁÐÅ×ÎÅ ×ÉÂÅÒ¦ÔØ\n"
-"\"×ÖÉ×ÁÔÉ pppoe\"."
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ËÏÒÉÓÔÕ×ÁÔÉÓÑ dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "×ÖÉ×ÁÔÉ pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "×ÖÉ×ÁÔÉ pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ñËÉÊ dhcp Ë̦¤ÎÔ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?\n"
-"óÔÁÎÄÁÒÔÎÉÊ Ë̦¤ÎÔ - dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦ ethernet. îÅ\n"
-"ÍÏÖÎÁ ×ÓÔÁÎÏ×ÉÔÉ Ú'¤ÄÎÁÎÎÑ ÃØÏÇÏ ÔÉÐÕ."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "÷ÉÂÅÒ¦ÔØ ¦ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ ÑËÕ ÐÌÁÔÕ ÍÅÒÅÖ¦ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú\n"
-"¶ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ÎÅ ÚÎÁÊÄÅÎÁ ÐÌÁÔÁ ÍÅÒÅÖ¦"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "ëÏÎƦÇÕÒÕÀ ÍÅÒÅÖÕ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr "Ú"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "îÁÚ×Á ÈÏÓÔÁ"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "ðÏͦÞÎÉË ËÏÎƦÇÕÒÁæ§ ÍÅÒÅÖ¦"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "úÏ×ΦÛÎ¦Ê ÍÏÄÅÍ ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "÷ÎÕÔÒ¦ÛÎÑ ÐÌÁÔÁ ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ñËÉÊ ÔÉÐ Ú'¤ÄÎÁÎÎÑ ISDN ÷É ÍÁ¤ÔÅ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"ñËÕ ËÏÎƦ­ÕÒÁæÀ ISDN ÷É ÂÁÖÁ¤ÔÅ ×ÓÔÁÎÏ×ÉÔÉ?\n"
-"\n"
-"* óÔÁÒÁ ËÏÎƦ­ÕÒÁÃ¦Ñ ×ÉËÏÒÉÓÔÕ×Õ¤ isdn4net. äÏÓÉÔØ ÐÏÔÕÖΦ ÚÁÓÏÂÉ\n"
-"×ÈÏÄÑÔØ ÄÏ ÓËÌÁÄÕ ÐÁËÅÔÕ, ÁÌÅ ÊÏÇÏ ÄÏÓÉÔØ ÓËÌÁÄÎÏ ÎÁÌÁÇÏÄÉÔÉ, ¦ צΠÎÅ\n"
-"¤ ÓÔÁÎÄÁÒÔÎÉÍ.\n"
-"\n"
-"* îÏ×Á ËÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏÓÔ¦ÛÁ ÄÌÑ ÒÏÚÕͦÎÎÑ, ¦ÌØÛ ÓÔÁÎÄÁÒÔÉÚÏ×ÁÎÁ, ÁÌÅ\n"
-"ÍÁ¤ ÍÅÎÛÅ ¦ÎÓÔÒÕÍÅÎÔÁÒ¦À.\n"
-"\n"
-"íÉ ÒÅËÏÍÅÎÄÕ¤ÍÏ ÐÒÏÓÔÕ ËÏÎƦ­ÕÒÁæÀ.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "îÏ×Á ËÏÎƦ­ÕÒÁÃ¦Ñ (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "óÔÁÒÁ ËÏÎƦ­ÕÒÁÃ¦Ñ (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ Ó×ÏÇÏ ÐÒÏ×ÁÊÄÅÒÁ.\n"
-"ñËÝÏ ÊÏÇÏ ÎÅÍÁ¤ × ÓÐÉÓËÕ, ×ÉÂÅÒ¦ÔØ ¶ÎÛÉÊ"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "´×ÒÏÐÅÊÓØËÉÊ ÐÒÏÔÏËÏÌ"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "´×ÒÏÐÅÊÓØËÉÊ ÐÒÏÔÏËÏÌØ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ \n"
-" ÂÅÚ D-ËÁÎÁÌÕ (×ÉĦÌÅÎÉÈ Ì¦Î¦Ê)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "ñËÉÊ ÐÒÏÔÏËÏÌ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "ñËÉÊ ÔÉÐ ËÁÒÔËÉ ÷É ÍÁ¤ÔÅ"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "îÅ ÚÎÁÀ"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ÐÌÁÔÕ ISA, ÚÎÁÞÅÎÎÑ ÎÁ ÎÁÓÔÕÐÎÏÍÕ ÅËÒÁΦ ÍÁÀÔØ ÂÕÔÉ\n"
-"ËÏÒÅËÔÎÉÍÉ.\n"
-"\n"
-"ñËÝÏ ÷É ÍÁ¤ÔÅ ÐÌÁÔÕ PCMCIA, ÷É ÐÏ×ÉÎΦ ÚÎÁÔÉ IRQ ÔÁ IO ÷ÁÛϧ ÐÌÁÔÉ.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "÷¦ÄͦÎÉÔÉ"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "ðÒÏÄÏ×ÖÕ×ÁÔÉ"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ñËÁ ÷ÁÛÁ ISDN ÐÌÁÔÁ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"úÎÁÊÄÅÎÁ ISDN PCI ÐÌÁÔÁ, ÁÌÅ ÎÅצÄÏÍÏÇÏ ÔÉÐÕ. ÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÏÄÎÕ Ú "
-"ÐÌÁÔ PCI ÎÁ ÎÁÓÔÕÐÎÏÍÕ ÅËÒÁΦ."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "îÅ ÚÎÁÊÄÅÎÏ ÐÌÁÔÉ ISDN PCI. ÷ÉÂÅÒ¦ÔØ ÏÄÎÕ ¦Ú ÐÌÁÔ Õ ÎÁÓÔÕÐÎÏÍÕ ×¦ËΦ."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "ðÁÒÁÍÅÔÒÉ Ú×'ÑÚËÕ ÐÏ ÍÏÄÅÍÕ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "îÁÚ×Á Ú×'ÑÚËÕ"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "úÁ ÄÏÐÏÍÏÇÏÀ ÓËÒÉÐÔÁ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "þÅÒÅÚ ÔÅÒͦÎÁÌ"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "îÁÚ×Á ÄÏÍÅÎÕ"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "ðÅÒÛÉÊ ÓÅÒ×ÅÒ DNS (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "äÒÕÇÉÊ ÓÅÒ×ÅÒ DNS(ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"÷É ÍÏÖÅÔŠצÄ'¤ÄÎÁÔÉÓØ ÁÂÏ ÚͦÎÉÔÉ ËÏÎƦ­ÕÒÁæÀ Ó×Ϥ§ ÍÅÒÅÖ¦."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"÷É ÍÏÖÅÔÅ ÚͦÎÉÔÉ ÎÁÓÔÒÏÊËÉ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÓÔÁÎÏ×ÌÅÎÏ."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"÷É ÚÁÒÁÚ Ú'¤ÄÎÁΦ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "÷É ÚÁÒÁÚ ÎÅ Ú'¤ÄÎÁΦ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "ú'¤ÄÎÁÔÉÓØ"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "÷¦Ä'¤ÄÎÁÔÉÓØ"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ¦ ËÏÎƦÇÕÒÁæÑ"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "úÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ Ú'¤ÄÎÁÎÎÑ %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"úÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ Ú'¤ÄÎÁÎÎÑ %s.\n"
-"\n"
-"\n"
-"îÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ÄÌÑ ÐÒÏÄÏ×ÄÖÅÎÎÑ"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"þÅÒÅÚ ÔÅ, ÝÏ ×É ÒÏÂÉÔÅ ÕÓÔÁÎÏ×ËÕ ÐÏ ÍÅÒÅÖ¦, ×ÁÛÁ ÍÅÒÅÖÁ ×ÖÅ\n"
-"ÓËÏÎƦ­ÕÒÏ×ÁÎÁ.  \n"
-"\n"
-"îÁÔÉÓΦÔØ ÎÁ çÁÒÁÚÄ ÝÏ ÚÂÅÒÅÇÔÉ ÕÓÔÁÎÏ×ËÉ ÍÅÒÅÖ¦, ÁÂÏ ÎÁ ÷¦ÄͦÎÉÔÉ\n"
-"ÄÌÑ ÔÏÇÏ, ÝÏ ÚͦÎÉÔÉ ÕÓÔÁÎÏ×ËÉ Ú'¤ÄÎÁÎÎÑ ¦ÎÔÅÒÎÅÔÁ ¦ ÍÅÒÅÖ¦.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÏͦÞÎÉËÁ ÕÓÔÁÎÏ×ËÉ ÍÅÒÅÖ¦.\n"
-"\n"
-"úÁÒÁÚ ×ÁÛÁ ÍÅÒÅÖÁ ÔÁ ¦ÎÔÅÒÎÅÔ Ú'¤ÄÎÁÎÎÑ ÂÕÄÕÔØ ÎÁÓÔÒϤΦ.  ñËÝÏ ×É ÎÅ\n"
-"ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ Á×ÔÏÍÁÔÉÞÎÉÍ ×ÉÚÎÁÞÅÎÎÑÍ, צÄͦΦÔØ ×ÉÂ¦Ò ÏÐæ§.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÒÏƦÌØ ÄÌÑ ËÏÎƦÇÕÒÁæ§:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "÷ÉÚÎÁÞÁÀ ÐÒÉÓÔÒϧ..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "ú×ÉÞÁÊÎÅ Ú'¤ÄÎÁÎÎÑ ÐÏ ÍÏÄÅÍÕ"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "ÚÎÁÊÄÅÎÏ ÎÁ ÐÏÒÔÕ %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "úÎÁÊÄÅÎÏ ÎÁ ¶ÎÔÅÒÆÅÊÓ¦ %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "ëÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "úÎÁÊÄÅÎÏ ËÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ÚÎÁÊÄÅÎÏ ÐÌÁÔÁ (É) Ethernet "
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ, ÑËÅ ÷É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"÷É ÎÁÓÔÒϧÌÉ Ë¦ÌØËÁ ÓÐÏÓÏÂ¦× Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÆÏÒÍÁæÊÎÉÍÉ ÔÅÎÅÔÁÍÉ.\n"
-"÷ÉÂÅÒ¦ÔØ ÏÄÉÎ ¦Ú ÎÉÈ, ÑËÉÍ ÷É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓØ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "ú'¤ÄÎÁÎÎÑ Ú ÔÅÎÅÔÁÍÉ"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "þÉ ÷É ÈÏÞÅÔŠצÄËÒÉ×ÁÔÉ Ú'¤ÄÎÁÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"ðÒÏÂÌÅÍÁ ÐÒÉ ÐÅÒÅÚÁÐÕÓËÕ ÍÅÒÅÖ¦:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"÷¦ÔÁ¤ÍÏ, ËÏÎƦ­ÕÒÁÃ¦Ñ ÍÅÒÅÖ¦ ÚÁ˦ÎÞÅÎÁ.\n"
-"\n"
-"ôÅÐÅÒ ÃÑ ËÏÎƦ­ÕÒÁÃ¦Ñ ÂÕÄÅ ÚÁÓÔÏÓÏ×ÁÎÁ ÄÏ ×ÁÛϧ ÓÉÓÔÅÍÉ.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"ð¦ÓÌÑ ÔÏÇÏ, ÑË ÃÅ ÚÁ˦ÎÞÅÎÏ, ÂÁÖÁÎÏ ÐÅÒÅ×ÁÎÔÁÖÉÔÉ X ÓÅÒ×ÅÒ ÄÌÑ ÔÏÇÏ,\n"
-"ÝÏ ÐÏÚÂÕÔÉÓÑ ÐÒÏÂÌÅÍÉ ¦Ú ÚͦÎÏÀ ÎÁÚ×É ÈÏÓÔÁ."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"õ÷áçá: ãÅÊ ÐÒÉÓÔÒ¦Ê ÂÕÌÏ ÐÏÐÅÒÅÄÎØÏ ÎÁÓÔÒϤÎÏ ÄÌÑ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ.\n"
-"\n"
-"ðÒÏÓÔÏ ÎÁÔÉÓΦÔØ \"çÁÒÁÚÄ\" ÝÏ ÚÂÅÒÅÇÔÉ ËÏÎƦ­ÕÒÁæÀ ÐÒÉÓÔÒÏÀ.\n"
-"úͦÎÁ ÐÏÌ¦× ÎÉÖÞÅ ÐÒÉ×ÅÄÅ ÄÏ ÚͦÎÉ ËÏÎƦ­ÕÒÁæ§ ÐÒÉÓÔÒÏÀ."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"÷×ÅĦÔØ, ÂÕÄØ-ÌÁÓËÁ, ËÏÎƦÇÕÒÁæÀ IP ÄÌÑ Ã¦¤§ ÍÁÛÉÎÉ.  ëÏÖÅÎ ÐÕÎËÔ\n"
-"ÔÒÅÂÁ ××ÏÄÉÔÉ ÑË IP ÁÄÒÅÓÕ × ÔÏÞËÏ×Ï-ÄÅÓÑÔËÏ×¦Ê ÎÏÔÁæ§ (ÑË,\n"
-"ÎÁÐÒÉËÌÁÄ, 1.2.3.4)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "ëÏÎƦÇÕÒÕÀ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦ %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s ÄÒÁÊ×ÅÒ)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-ÁÄÒÅÓÁ"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "íÁÓËÁ ÍÅÒÅÖ¦"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦÇÕÒÁÃ¦Ñ IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"÷×ÅĦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁÚ×Õ ÷ÁÛÏÇÏ ÈÏÓÔÁ. îÁÚ×Á ÈÏÓÔÁ ÐÏ×ÉÎÎÁ ÂÕÔÉ\n"
-"ÐÏ×ΦÓÔÀ Ë×Á̦ƦËÏ×ÁÎÏÀ ÎÁÚ×ÏÀ ÈÏÓÔÁ, ÔÁËÏÀ, ÑË, ÎÁÐÒÉËÌÁÄ,\n"
-"``mybox.mylab.myco.com''.\n"
-"÷É ÔÁËÏÖ ÍÏÖÅÔÅ ××ÅÓÔÉ IP ÁÄÒÅÓÕ ÛÌÀÚÁ ÑËÝÏ ÷É ÔÁËÉÊ ÍÁ¤ÔÅ."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "óÅÒ×ÅÒ DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "ûÌÀÚÏ×ÉÊ ÐÒÉÓÔÒ¦Ê"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏËÓ¦"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "ðÒÏËÓ¦ HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "ðÒÏËÓ¦ FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-"úÁÐÉÓÁÔÉ id ÐÌÁÔÉ ÍÅÒÅÖ¦ (ÍÏÖÅ ÚÎÁÄÏÂÉÔØÓÑ ÐÒÉ ËÏÒÉÓÔÕ×ÁÎΦ ÍϦÌØÎÉÍ "
-"ËÏÍÐ'ÀÔÅÒÏÍ)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "÷ÉÇÌÑÄ ÐÒÏËÓ¦ ÍÁ¤ ÂÕÔÉ http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "÷ÉÇÌÑÄ ÐÒÏËÓ¦ ÍÁ¤ ÂÕÔÉ ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ Ð¦ÄËÌÀÞÉÔÉÓÑ ÄÏ ¦ÎÔÅÒÎÅÔÕ ÚÁÒÁÚ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "÷ÉÐÒÏÂÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑ..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "óÉÓÔÅÍÁ Ú'¤ÄÎÁÎÁ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "ú ÔÏÞËÉ ÚÏÒÕ ÂÅÚÐÅËÉ, ×É ÂÕÄÅÔÅ ÚÁÒÁÚ ×¦Ä'¤ÄÎÁΦ."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"óÉÓÔÅÍÁ ÚÄÁ¤ÔØÓÑ ÎŠЦÄËÌÀÞÅÎÁ ÄÏ ¦ÎÔÅÒÎÅÔÕ.\n"
-"óÐÒÏÂÕÊÔÅ ÚͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "âÕÄØ-ÌÁÓËÁ ÚÁÐÏ×ΦÔØ ÁÂÏ ×ÉÂÅÒ¦ÔØ ÐÏÌÅ ×ÎÉÚÕ"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "ðÅÒÅÐÉÎ ËÁÒÔËÉ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "ðÁÍ'ÑÔØ ËÁÒÔËÉ (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "÷/÷ ËÁÒÔËÉ"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "÷/÷_0 ËÁÒÔËÉ"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "÷/÷_1 ËÁÒÔËÉ"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "÷ÁÛ ÏÓÏÂÉÓÔÉÊ ÎÏÍÅÒ ÔÅÌÅÆÏÎÕ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "îÁÚ×Á ÐÒÏ×ÁÊÄÅÒÁ (ÔÏÂÔÏ provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "îÏÍÅÒ ÔÅÌÅÆÏÎÕ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1Ê DNS ÐÒÏ×ÁÊÄÅÒÁ (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2Ê DNS ÐÒÏ×ÁÊÄÅÒÁ  (ÎÅÏÂÏ×'ÑÚËÏ×Ï)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "÷ÉÂÅÒ¦ÔØ ËÒÁ§ÎÕ"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "òÅÖÉÍ Ú×'ÑÚËÕ ÞÅÒÅÚ ÍÏÄÅÍ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "û×ÉÄ˦ÓÔØ Ú×'ÑÚËÕ"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "úÁÔÒÉÍËÁ ÐÅÒÅÄ ÚÁËÒÉÔÔÑÓ Ú×'ÑÚËÕ (ÓÅË)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "òÁÈÕÎÏË ËÏÒÉÓÔÕ×ÁÞÁ (¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "ðÁÒÏÌØ Õ ÐÒÏ×ÁÊÄÅÒÁ"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ÐÏÍÉÌËÁ ÍÏÎÔÕ×ÁÎÎÑ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "òÏÚÛÉÒÅΦ ЦÄÒÏÚĦÌÉ ÎŠЦÄÔÒÉÍÕÀÔØÓÑ ÎÁ Ã¦Ê ÐÌÁÔÆÏÒͦ."
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"õ ÷ÁÓ ¤ ÐÒÏͦÖÏË × ÔÁÂÌÉæ ÒÏÚĦ̦×, ÁÌÅ Ñ ÎÅ ÍÏÖÕ ÎÉÍ ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ.\n"
-"´ÄÉÎÉÍ Ò¦ÛÅÎÎÑÍ ÍÏÖÅ ÂÕÔÉ ÐÅÒÅÓÕÎÕÔÉ ÷ÁÛ¦ ÏÓÎÏ×Φ ЦÄÒÏÚĦÌÉ ÔÁË, ÝÏÂ\n"
-"ÐÒÏͦÖÏË ÂÕ× ÐÏÒÕÞ Ú ÒÏÚÛÉÒÅÎÉÍÉ Ð¦ÄÒÏÚĦÌÁÍÉ."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "÷¦ÄÎÏ×ÌÅÎÎÑ Ú ÆÁÊÌÕ %s ÎÅ ÓÐÒÁÃÀ×ÁÌÏ: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÚÁÐÉÓ¦ Õ ÆÁÊÌ %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ýÏÓØ ÎÅÄÏÂÒŠצÄÂÕ×Á¤ÔØÓÑ ÎÁ ×ÁÛÏÍÕ ÄÉÓËÕ.\n"
-"ôÅÓÔÕ×ÁÎÎÑ Ã¦Ì¦ÓÎÏÓÔ¦ ÄÁÎÉÈ ÂÕÌÏ ÎÅ×ÄÁÌÉÍ.\n"
-"ãÅ ÏÚÎÁÞÁ¤, ÝÏ ÚÁÐÉÓ ÂÕÄØ-ÞÏÇÏ ÎÁ ÄÉÓË ÍÁÔÉÍÅ ÓÕÍÎÉÊ ÒÅÚÕÌØÔÁÔ."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ÐÏÔÒ¦ÂÎÉÊ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "×ÁÖÌÉ×ÉÊ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ÄÕÖÅ ÇÁÒÎÉÊ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ÇÁÒÎÏ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ÍÏÖÌÉ×Ï"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System (óЦÌØÎÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ ÄÌÑ àΦËÓ)"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation (ÎÏ×Å ÐÏËÏ̦ÎÎÑ)"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦ lpd"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "ðÒÉÎÔÅÒ × ÍÅÒÅÖ¦ (ÓÏËÅÔ)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ ÓÅÒ×ÅÒ¦ SMB/Windows 95/98/NT "
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "ðÒÉÎÔÅÒ ÎÁ NetWare ÓÅÒ×ÅÒ¦"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "ðÅÒÅÎÁÐÒÁ×ÉÔÉ ÒÏÂÏÔÕ ÐÏ ËÁÎÁÌÕ × ËÏÍÁÎÄÕ"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "îÅצÄÏÍÁ ÍÏÄÅÌØ"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "ðÏÍÉÌËÁ ÐÒÉ ÚÁÐÉÓ¦ Õ ÆÁÊÌ %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(ÎÁ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ÎÁ Ã¦Ê ÍÁÛÉΦ)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (ïÓÎÏ×ÎÁ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ñË ÐÒÉÎÔÅÒ Ú'¤ÄÎÁÎÉÊ"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"äÌÑ ×¦ÄÄÁÌÅÎÏÇÏ ÓÅÒ×ÅÒÁ CUPS ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ËÏÎƦ­ÕÒÕ×ÁÔÉ ÐÒÉÎÔÅÒ¦×,\n"
-"×Ó¦ ÐÒÉÎÔÅÒÉ ÂÕÄÕÔØ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÚÎÁÞÅΦ. ñËÝÏ ÷É ÓÕÍΦ×Á¤ÔÅÓØ,\n"
-"×ÉÂÅÒ¦ÔØ \"÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "ëÏÎƦ­ÕÒÁæÑ"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÓÅÒ×ÅÒ CUPS"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"ñËÝÏ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ ×¦ÄÄÁÌÅÎÉÍ ÓÅÒ×ÅÒÏÍ CUPS, ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ\n"
-"ËÏÎƦ­ÕÒÕ×ÁÔÉ ÐÒÉÎÔÅÒ¦×. óÅÒ×ÅÒ CUPS ÐÏצÄÏÍÉÔØ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒÕ ÐÒÏ\n"
-"ÐÒÉÎÔÅÒÉ ÓÁÍÏÓÔ¦ÊÎÏ. ÷Ó¦ ÐÒÉÎÔÅÒÉ, Ñ˦ ÎÁ ÄÁÎÉÊ ÍÏÍÅÎÔ ×¦ÄÏͦ ÷ÁÛ¦Ê\n"
-"ÍÁÛÉΦ, ÐÅÒÅ̦ÞÅΦ × ÐÏ̦ \"óÔÁÎÄÁÒÔÎÉÊ ÐÒÉÎÔÅÒ\". ÷ÉÂÅÒ¦ÔØ, ÑËÉÊ\n"
-"ÐÒÉÎÔÅÒ ÂÕÄÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ ÷ÁÛÅÀ ÍÁÛÉÎÏÀ ÎÅÑ×ÎÏ ¦ ÎÁÔÉÓΦÔØ ËÎÏÐËÕ\n"
-"\"úÁÓÔÏÓÕ×ÁÔÉ/ðÅÒÅÞÉÔÁÔÉ ÐÒÉÎÔÅÒÉ\". ýÏ ÐÏÎÏ×ÉÔÉ ÓÐÉÓÏË ÐÒÉÎÔÅÒ¦×\n"
-"ÎÁÔÉÓΦÔØ ÃÀ Ö ËÎÏÐËÕ (×¦Ä ÍÏÍÅÎÔÕ ÓÔÁÒÔÕ ÓÅÒ×ÅÒÁ CUPS ÄÏ ÔÏÇÏ ÞÁÓÕ,\n"
-"ÐÏËÉ ×Ó¦ ÐÒÉÎÔÅÒÉ Ú'Ñ×ÌÑÔØÓÑ ÎÁ ÅËÒÁΦ ÍÏÖÅ ÐÒÏÊÔÉ ÄÏ 30 ÓÅËÕÎÄ). ñËÝÏ\n"
-"ÓÅÒ×ÅÒ CUPS, ÑËÉÊ ÏÂÓÌÕÇÏ×Õ¤ ÷ÁÛÕ ÍÁÛÉÎÕ, ÚÎÁÈÏÄÉÔØÓÑ × ¦ÎÛ¦Ê ÍÅÒÅÖ¦,\n"
-"÷É ÐÏ×ÉÎΦ ×ËÁÚÁÔÉ IP-ÁÄÒÅÓÕ ÓÅÒ×ÅÒÁ ¦ (ÍÏÖÌÉ×Ï) ÎÏÍÅÒ ÐÏÒÔÕ, ÝÏÂ\n"
-"ÏÔÒÉÍÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÐÒÉÎÔÅÒ Ú ÓÅÒ×ÅÒÁ. ¶ÎÁËÛÅ ÚÁÌÉÛÔŠæ ÐÏÌÑ\n"
-"ÐÏÒÏÖΦÍÉ."
-
-#: ../../printerdrake.pm_.c:72
-#, fuzzy
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"ú×ÉÞÁÊÎÏ ÓÉÓÔÅÍÁ CUPS Á×ÔÏÍÁÔÉÞÎÏ ËÏÎƦ­ÕÒÕ¤ÔØÓÑ Õ ×¦ÄÐÏצÄÎÏÓÔ¦ Ú\n"
-"ËÏÎƦ­ÕÒÁæ¤À ÍÅÒÅÖ¦, ÔÁËÉÍ ÞÉÎÏÍ, ÝÏ ÍÏÖÎÁ ÚÒÁÚÕ Ö ÍÁÔÉ ÄÏÓÔÕÐ ÄÏ\n"
-"ÐÒÉÎÔÅÒ¦×, ÒÏÚÔÁÛÏ×ÁÎÉÈ × ÌÏËÁÌØÎ¦Ê ÍÅÒÅÖ¦. ñËÝÏ ÃÅ ÎÅ ÚÒÏÂÌÅÎÏ\n"
-"ËÏÒÅËÔÎÏ, ×ÉÍËΦÔØ ÏÐæÀ 'á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ CUPS' ¦ ×ÒÕÞÎÕ\n"
-"צÄÒÅÄÁÇÕÊÔÅ ÆÁÊÌ /etc/cups/cupsd.conf. îÅ ÚÁÂÕÄØÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔÉ CUPS\n"
-"ЦÓÌÑ ÃØÏÇÏ (ËÏÍÁÎÄÁ: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ÁÄÒÅÓÁ ÍÁ¤ ÂÕÔÉ Õ ÆÏÒÍÁÔ¦ 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÍÁ¤ ÂÕÔÉ Ã¦ÌÉÍ ÞÉÓÌÏÍ!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "ðÏÒÔ"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "÷ÉÚÎÁÞÁÀ ÐÒÉÓÔÒϧ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "ôÅÓÔÕÀ ÐÏÒÔÉ"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "äÏÄÁÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏ×ÉÚÎÁÞÅÎÎÑÍ"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "ÚÎÁÊÄÅÎÏ %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "÷×ÅĦÔØ URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"ýÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×¦ÄÄÁÌÅÎÉÊ lpd ÐÒÉÎÔÅÒ, ÷É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ ÎÁÚ×Õ\n"
-"ÈÏÓÔÁ ÐÒÉÎÔ-ÓÅÒ×ÅÒÁ ÔÁ ÎÁÚ×Õ ÐÒÉÎÔÅÒÁ ÎÁ ÃØÏÍÕ ÈÏÓÔ¦."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÈÏÓÔÁ"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ×¦ÄÄÁÌÅÎÏÇÏ ÈÏÓÔÁ!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "÷¦ÄÓÕÔÎÑ ÎÁÚ×Á ÐÒÉÎÔÅÒÁ!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ïÐæ§ SMB (Windows 9x/NT) ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"ýÏ ÄÒÕËÕ×ÁÔÉ ÎÁ SMB ÐÒÉÎÔÅÒ¦ ÷É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ ÎÁÚ×Õ SMB ÈÏÓÔÁ\n"
-"(÷¦ÄͦÔØÔÅ: ÷ÏÎÁ ÍÏÖŠצÄÒ¦ÚÎÑÔÉÓÑ ×¦Ä ÊÏÇÏ TCP/IP ÎÁÚ×É!) ¦ ÍÏÖÌÉ×Ï\n"
-"ÔÁËÏÖ IP ÁÄÒÅÓÕ ÐÒÉÎÔ ÓÅÒ×ÅÒÁ ÒÁÚÏÍ Ú ¦ÍÅÎÅÍ ÓÅÒצÓÁ ÔÁ ÂÕÄØ-ÑËÉÍ\n"
-"¦ÍÅÎÅÍ ËÏÒÉÓÔÕ×ÁÞÁ ÒÁÚÏÍ Ú ÐÁÒÏÌÅÍ, ÔÁ ÒÏÂÏÞÏÀ ÇÒÕÐÏÀ."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "îÁÚ×Á ÈÏÓÔÁ SMB ÓÅÒ×ÅÒÁ"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP ÁÄÒÅÓÁ SMB ÓÅÒ×ÅÒÁ"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "îÁÚ×Á ÒÅÓÕÒÓÕ"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "òÏÂÏÞÁ ÇÒÕÐÁ"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "íÁÀÔØ ÂÕÔÉ ×ËÁÚÁÎÉÍÉ ÁÂÏ ÎÁÚ×Á ÓÅÒ×ÅÒÁ, ÁÂÏ ÊÏÇÏ IP ÁÄÒÅÓÁ!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÒÅÓÕÒÓÕ samba!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"äÌÑ ÔÏÇÏ, ÝÏ ÄÒÕËÕ×ÁÔÉ ÎÁ NetWare ÐÒÉÎÔ-ÓÅÒ×ÅÒ¦, ÷É ÐÏ×ÉÎΦ\n"
-"×ËÁÚÁÔÉ ÎÁÚ×Õ ÐÒÉÎÔ-ÓÅÒ×ÅÒÁ (úÁÕ×ÁÖÔÅ! ×ÏÎÁ ÍÏÖŠצÄÒ¦ÚÎÑÔÉÓÑ ×¦Ä\n"
-"TCP/IP ¦ÍÅΦ ÈÏÓÔÁ!) ÒÁÚÏÍ Ú ÎÁÚ×ÏÀ ÐÒÉÎÔÅÒÁ, ÑËÉÍ ÷É ÈÏÞÅÔÅ\n"
-"ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÔÁ צÄÐÏצÄÎÉÍ ¦ÍÅÎÅÍ ËÏÒÉÓÔÕ×ÁÞÁ Ú ÐÁÒÏÌÅÍ."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "ðÒÉÎÔÅÒ ÓÅÒ×ÅÒ"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "îÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÓÅÒ×ÅÒÁ NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÞÅÒÇÉ NCP!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "ðÁÒÁÍÅÔÒÉ ÐÒÉÎÔÅÒÁ × ÍÅÒÅÖ¦"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"ýÏ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦ × ÍÅÒÅÖ¦, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÎÁÄÁÔÉ ÎÁÚ×Õ ÈÏÓÔÁ\n"
-"ÐÒÉÎÔÅÒÁ, ÔÁ ÍÏÖÌÉ×Ï ÎÏÍÅÒ ÐÏÒÔÁ. îÁ ÓÅÒ×ÅÒÁÈ HP JetDirect ÎÏÍÅÒ ÐÏÒÔÁ\n"
-"Õ Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× 9100, ÎÁ ¦ÎÛÉÈ ÍÏÖÅ\n"
-"צÄÒ¦ÚÎÑÔÉÓØ. ðÒÏËÏÎÓÕÌØÔÕÊÔÅÓØ Ú ¦ÎÓÔÒÕËæ¤À ÄÏ ÁÐÁÒÁÔÎÏÇÏ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "îÁÚ×Á ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "îÅÍÁ¤ ÎÁÚ×É ÈÏÓÔÁ ÐÒÉÎÔÅÒÁ!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI ÐÒÉÓÔÒÏÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"íÏÖÎÁ ×ËÁÚÁÔÉ ÂÅÚÐÏÓÅÒÅÄÎØÏ URI ÄÌÑ ÄÏÓÔÕÐÕ ÄÏ ÐÒÉÎÔÅÒÁ. URI ÍÁ¤\n"
-"צÄÐÏצÄÁÔÉ ÓÐÅÃÉƦËÁæÑÍ ÁÂÏ CUPS ÁÂÏ Foomatic. úÁÕ×ÁÖÔÅ, ÏÄÎÁË, ÝÏ\n"
-"ÎÅ ×Ó¦ ÔÉÐÉ URI ЦÄÔÒÉÍÕÀÔØÓÑ ÚÁÓÏÂÁÍÉ ËÅÒÕ×ÁÎÎÑ ÞÅÒÇ ÄÒÕËÕ."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "ðÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ËÏÒÅËÔÎÉÊ URI!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"ëÏÖÎÏÍÕ ÐÒÉÎÔÅÒÕ ÐÏ×ÉÎÎÁ צÄÐÏצÄÁÔÉ ÎÁÚ×Á (ÎÁÐÒÉËÌÁÄ lp).\n"
-"ðÏÌÑ ïÐÉÓ ÔÁ òÏÚÔÁÛÕ×ÁÎÎÑ ÚÁÐÏ×ÎÀ×ÁÔÉ ÎÅÏÂÏ×'ÑÚËÏ×Ï. ÷ÏÎÉ ¤\n"
-"ÌÉÛ ËÏÍÅÎÔÁÒÑÍÉ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞ¦×."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "îÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "ïÐÉÓ"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "òÏÚÔÁÛÕ×ÁÎÎÑ"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "çÏÔÕÀÔØÓÑ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "÷ÓŠצÒÎÏ?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "îÁÚ×Á צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "÷ÉÂ¦Ò ÍÏÄÅ̦ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "ñËÕ ÍÏÄÅÌØ ÐÒÉÎÔÅÒÁ ÷É ÍÁ¤ÔÅ"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-#, fuzzy
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"óÔÁÎÄÁÒÔΦ ÕÓÔÁÎÏ×ËÉ ÐÒÉÎÔÅÒÁ \n"
-"ðÅÒÅÓצÄÞ¦ÔØÓÑ, ÝÏ ÒÏÚÍ¦Ò ÓÔÏÒ¦ÎËÉ ÔÁ ÔÉÐ ÞÏÒÎÉÌ (ÑËÝÏ ÔÁËÁ ÕÓÔÁÎÏ×ËÁ\n"
-"ÐÒÉÓÕÔÎÑ) ×ÓÔÁÎÏ×ÌÅΦ צÒÎÏ. úÁÕ×ÁÖÔÅ, ÝÏ Ú Û×ÉÄ˦ÓÔØ ÄÒÕËÕ Ú\n"
-"ÎÁÄÚ×ÉÞÁÊÎÏ ×ÉÓÏËÏÀ Ñ˦ÓÔÀ ÍÏÖÅ ÂÕÔÉ ÚÎÁÞÎÏ ÐÏצÌØΦÛÁ."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "ðÁÒÁÍÅÔÒ %s ÍÁ¤ ÂÕÔÉ Ã¦ÌÉÍ ÞÉÓÌÏÍ!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "ðÁÒÁÍÅÔÒ %s ÍÁ¤ ÂÕÔÉ ÞÉÓÌÏÍ!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "ðÁÒÁÍÅÔÒ %s ×ÉÈÏÄÉÔØ ÚÁ ÒÁÍËÉ ÄÏÚ×ÏÌÅÎÉÈ ÍÅÖ!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"÷ÓÔÁÎÏ×ÉÔÉ ÐÒÉÎÔÅÒ \"%s\"\n"
-"ÑË ÓÔÁÎÄÁÒÔÎÉÊ?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "ôÅÓÔÕÀ ÓÔÏÒ¦ÎËÉ"
-
-#: ../../printerdrake.pm_.c:1583
-#, fuzzy
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ ÌÁÓËÁ, ÓÔÏÒ¦ÎËÉ ÄÌÑ ÄÒÕËÕ\n"
-"úÁÕ×ÁÖÔÅ: ÄÒÕË ÆÏÔÏÇÒÁƦÞÎÉÈ ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË ÍÏÖÅ ÂÕÔÉ ÄÏ×ÇÉÍ ¦\n"
-"ÌÁÚÅÒΦ ÐÒÉÎÔÅÒÉ Ú ÎÅ×ÅÌÉËÉÍ ÏÂ'¤ÍÏÍ ÐÁÍ'ÑÔ¦ ÍÏÖÕÔØ ÎÁצÔØ ÚÏ×Ó¦Í ÎÅ\n"
-"ÎÁÄÒÕËÕ×ÁÔÉ ÔÁËÕ ÓÔÏÒ¦ÎËÕ. õ ¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦Ä ÄÏÓÔÁÔÎØÏ ÎÁÄÒÕËÕ×ÁÔÉ\n"
-"ÓÔÁÎÄÁÒÔÎÕ ÐÒÏÂÎÕ ÓÔÏÒ¦ÎËÕ."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "îÅÍÁ¤ ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "äÒÕË"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "óÔÁÎÄÁÒÔÎÁ ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "äÏÄÁÔËÏ×Á ÔÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÆÏÔÏÇÒÁƦÞÎϧ ÑËÏÓÔ¦"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "äÒÕË ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "äÒÕËÕÀ ÔÅÓÔÏ×Õ ÓÔÏÒ¦ÎËÕ(ÓÔÏÒ¦ÎËÉ)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÐÅÒÅÄÁÎÁ ÐÒÏÇÒÁͦ ÄÒÕËÕ.\n"
-"ðÅÒÅÄ ÔÉÍ, ÑË ÐÒÉÎÔÅÒ ÐÏÞÎÅ ÄÒÕËÕ×ÁÔÉ, ÍÏÖÌÉ×Ï ÐÒÏÊÄÅ \n"
-"ÄÅÑËÉÊ ÞÁÓ.\n"
-"óÔÁÔÕÓ ÄÒÕËÕ:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"ôÅÓÔÏ×Á ÓÔÏÒ¦ÎËÁ ÐÅÒÅÄÁÎÁ ÐÒÏÇÒÁͦ ÄÒÕËÕ.\n"
-"ðÅÒÅÄ ÔÉÍ, ÑË ÐÒÉÎÔÅÒ ÐÏÞÎÅ ÄÒÕËÕ×ÁÔÉ, ÍÏÖÌÉ×Ï ÐÒÏÊÄÅ\n"
-"ÄÅÑËÉÊ ÞÁÓ. þÉ ×¦Î ÐÒÁÃÀ¤ ËÏÒÅËÔÎÏ?\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "óÐÒÁÃÀ×ÁÌÏ ÎÏÒÍÁÌØÎÏ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "îÅÍÁ¤ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "úÁËÒÉÔÉ"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "÷ÉÍÉËÁÀ ÍÅÒÅÖÕ"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "þÉÔÁÀ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "ðÅÒÅÎ¦Ó ËÏÎƦÇÕÒÁæ§ ÐÒÉÎÔÅÒ¦× "
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"ëÏÎƦ­ÕÒÁæÀ, ÝÏ ÂÕÌÁ ЦÄÇÏÔÏ×ÁÎÁ ÄÌÑ ÞÅÒÇÉ %s ÷É ÍÏÖÅÔÅ ÓËÏЦÀ×ÁÔÉ\n"
-"äÌÑ ÄÁÎϧ ÕÓÔÁÎÏ×ËÉ ÞÅÒÇÉ ÄÒÕËÕ (%s). ÷Ó¦ ÕÓÔÁÎÏ×ÏÞΦ ÄÁΦ (ÎÁÚ×Á\n"
-"ÐÒÉÎÔÅÒÁ, ÏÐÉÓ, ÒÏÚÔÁÛÕ×ÁÎÎÑ, ÔÉÐ Ú'¤ÄÎÁÎÎÑ ¦ ÓÔÁÎÄÁÒÔΦ ÕÓÔÁÎÏ×ËÉ)\n"
-"ÂÕÄÕÔØ ÐÅÒÅÎÅÓÅΦ ÎÁ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ. áÌÅ ÒÏÂÏÔÉ Ú ÞÅÒÇÉ ÐÅÒÅÎÅÓÅÎÏ\n"
-"ÎÅ ÂÕÄÅ. îÅ ×Ó¦ ÞÅÒÇÉ ÍÏÖÕÔØ ÂÕÔÉ ÐÅÒÅÎÅÓÅÎÉÍÉ Ú ÔÁËÉÈ ÐÒÉÞÉÎ: \n"
-
-#: ../../printerdrake.pm_.c:1818
-#, fuzzy
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ΊЦÄÔÒÉÍÕ¤ ÄÒÕË ÎÁ ÐÒÉÎÔÅÒÁÈ ÓÅÒ×ÅÒ¦× Novell ÞÉ ÐÒÉÎÔÅÒ¦×, ÝÏ\n"
-"ÐÅÒÅÄÁÀÔØ ÄÁΦ ÎÁ ÄÒÕË Õ ×ÉÇÌÑĦ ËÏÍÁÎÄ Ú ÄÏצÌØÎÉÍ ÓÉÎÔÁËÓÉÓÏÍ.\n"
-
-#: ../../printerdrake.pm_.c:1820
-#, fuzzy
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ЦÄÔÒÉÍÕ¤ Ô¦ÌØËÉ ÌÏËÁÌØΦ ÐÒÉÎÔÅÒÉ, צÄÄÁÌÅΦ ÐÒÉÎÔÅÒÉ LDP ¦\n"
-"ÐÒÉÎÔÅÒÉ, ÝÏ ÐÒÁÃÀÀÔØ ÞÅÒÅÚ Socket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ÔÁ LPRng ΊЦÄÔÒÉÍÕÀÔØ ÐÒÉÎÔÅÒÉ IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-#, fuzzy
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"äÏÄÁÔËÏ×Ï, ÞÅÒÇÉ ÎÅ ÐÅÒÅÎÏÓÑÔØÓÑ Ã¦¤À ËÏÍÁÎÄÏÀ ¦ ËÏÎƦ­ÕÒÁæÑ\n"
-"\"foomatic-configure\" ÎÅ ÍÏÖÅ ÂÕÔÉ ÐÅÒÅÎÅÓÅÎÁ ÔÁËÏÖ."
-
-#: ../../printerdrake.pm_.c:1825
-#, fuzzy
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"ëÒ¦Í ÔÏÇÏ, ÐÒÉÎÔÅÒÉ ÓËÏÎƦ­ÕÒÏ×ÁΦ ÚÁ ÄÏÐÏÍÏÇÏÀ ÎÁÄÁÎÉÈ ×ÉÒÏÂÎÉËÁÍÉ\n"
-"ÆÁÊÌ¦× PPD ÞÉ ÐÒÉÎÔÅÒÉ, ÝÏ ÍÁÀÔØ Ò¦ÄΦ ÄÒÁÊ×ÅÒÉ CUPS ÎÅ ÍÏÖÕÔØ ÂÕÔÉ\n"
-"ÐÅÒÅÎÅÓÅÎÉÍÉ."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"ðÏÚÎÁÞÔÅ ÐÒÉÎÔÅÒÉ ÄÌÑ ÐÅÒÅÎÏÓÕ ¦ ÎÁÔÉÓΦÔØ ÎÁ \"ðÅÒÅÎÅÓÔÉ\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "îÅ ÐÅÒÅÎÏÓÉÔÉ ÐÒÉÎÔÅÒÉ"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "ðÅÒÅÎÅÓÔÉ"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"ðÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"%s\" ×ÖÅ ¦ÓÎÕ¤ × \"%s\". îÁÔÉÓΦÔØ \"ðÅÒÅÎÅÓÔÉ\" ÝÏÂ\n"
-"ÐÅÒÅÐÉÓÁÔÉ ÊÏÇÏ ×ÉÚÎÁÞÅÎÎÑ. ÷É ÍÏÖÅÔÅ ÔÁËÏÖ ÎÁÄÒÕËÕ×ÁÔÉ ÎÏ×Õ ÎÁÚ×Õ ÞÉ\n"
-"ÐÒÏÐÕÓÔÉÔÉ ÃÅÊ ÐÒÉÎÔÅÒ."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"îÁÚ×Á ÐÒÉÎÔÅÒÁ ÍÁ¤ ÓËÌÁÄÁÔÉÓÑ Ô¦ÌØËÉ Ú Ì¦ÔÅÒ, ÃÉÆÒ ÔÁ ÓÉÍ×ÏÌÁ ЦÄËÒÅÓÌÅÎÎÑ."
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"ðÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"%s\" ×ÖÅ ¦ÓÎÕ¤.\n"
-"÷É Ä¦ÊÓÎÏ ÂÁÖÁ¤ÔÅ ÐÅÒÅÐÉÓÁÔÉ ÊÏÇÏ ËÏÎƦ­ÕÒÁæÀ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "îÏ×Á ÎÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "ðÅÒÅÎÏÛÕ %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, fuzzy, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"÷É ÐÅÒÅÎÅÓÌÉ ÷ÁÛ ËÏÌÉÛÎ¦Ê ÏÓÎÏ×ÎÉÊ ÐÒÉÎÔÅÒ (\"%s\"). úÒÏÂÉÔÉ ÔÁË, ÝÏÂ\n"
-"ÃÅÊ ÐÒÉÎÔÅÒ ÚÁÌÉÛÁ×ÓÑ ÏÓÎÏ×ÎÉÍ ¦ × ÎÏ×¦Ê ÓÉÓÔÅͦ ÄÒÕËÕ %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "ðÏÎÏ×ÌÀÀ ÄÁΦ ÐÒÉÎÔÅÒ¦×  ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "îÁÓÔÒϧÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "ðÏÞÉÎÁÀ Ú'¤ÄÎÁÎÎÑ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "ëÏÎƦÇÕÒÕÀ ÍÅÒÅÖÕ"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "÷ÉÓÏËÉÊ"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "ðÁÒÁÎϦÄÁÌØÎÉÊ"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "ñËÕ ÓÉÓÔÅÍÕ ÄÒÕËÕ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "ðÅÒÅצÒËÁ ×ÓÔÁÎÏ×ÌÅÎÏÇÏ ÐÒÏÇÒÁÍÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "óÔÉÒÁÀ LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "÷ÉÄÁÌÅÎÎÑ LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "÷ÉÂÅÒ¦ÔØ ÞÅÒÇÕ ÄÒÕËÕ ÄÌÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ñËÕ ÞÅÒÇÕ ÄÒÕËÕ (ÓÉÓÔÅÍÕ) ÷É ÈÏÞÅÔÅ ×ÖÉ×ÁÔÉ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "ïÐæ§ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "çÏÔÕÀ PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "îÁÓÔÒÏÀÀ ÐÒÉÎÔÅÒ \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "þÉ ÔÒÅÂÁ ÷ÁÍ ÎÁÓÔÒϧÔÉ ÄÒÕË?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "óÉÓÔÅÍÁ ÄÒÕËÕ: "
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "äÒÕËÁÒËÁ"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"ôÁ˦ ÐÒÉÎÔÅÒÉ ×ÖÅ ÓËÏÎƦ­ÕÒÏ×ÁΦ.\n"
-"÷É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"ôÁ˦ ÐÒÉÎÔÅÒÉ ×ÖÅ ÓËÏÎƦ­ÕÒÏ×ÁΦ.\n"
-"÷É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "ú×ÉÞÁÊÎÉÊ ÒÅÖÉÍ"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"ðÒÉÎÔÅÒ %s: %s %s\n"
-"ýÏ ÐÏÔÒ¦ÂÎÏ ÚͦÎÉÔÉ ÄÌÑ ÃØÏÇÏ ÐÒÉÎÔÅÒÁ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "÷ÉËÏÎÁÔÉ!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "ôÉÐ  Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "îÁÚ×Á, ÏÐÉÓ, ÒÏÚÔÁÛÕ×ÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "÷ÉÒÏÂÎÉË ÐÒÉÎÔÅÒÁ, ÍÏÄÅÌØ, ÄÒÁÊ×ÅÒ"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "÷ÉÒÏÂÎÉË ÐÒÉÎÔÅÒÁ, ÍÏÄÅÌØ"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÑË ÏÓÎÏ×ÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "äÒÕË ÔÅÓÔÏ×ÉÈ ÓÔÏÒ¦ÎÏË"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "þÉ ×É ÈÏÞÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÎÏ×Õ ËÏÎƦ­ÕÒÁæÀ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "óÔÉÒÁÀ ÄÁΦ ÓÔÁÒÏÇÏ ÐÒÉÎÔÅÒÁ \"%s\"  ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "óÔÁÎÄÁÒÔÎÉÊ ÐÒÉÎÔÅÒ"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "ðÒÉÎÔÅÒ \"%s\" ×ÓÔÁÎÏ×ÌÅÎÏ ÏÓÎÏ×ÎÉÍ"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "óÔÉÒÁÀ ÐÒÉÎÔÅÒ \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÐÒÏËÓ¦"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ËÏÎƦ­ÕÒÁæÊÎϧ ÐÒÏÇÒÁÍÉ ÄÌÑ ÐÒÏËÓ¦.\n"
-"\n"
-"ôÕÔ ÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÐÒÏËÓ¦ ÄÌÑ ÐÒÏÔÏËÏÌ¦× ftp ÔÁ http Ú ÐÁÒÏÌÅÍ\n"
-"ÞÉ ÂÅÚ.  \n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"úÁÐÏ×ΦÔØ ÇÒÁÆÉ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ÐÒÏËÓ¦ http\n"
-"úÁÌÉÛ¦ÔØ §È ÐÏÒÏÖΦÍÉ, ÑËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÐÒÏËÓ¦ http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ÐÏÒÔ"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "÷ÉÇÌÑÄ URL ÍÁ¤ ÂÕÔÉ http:"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "îÏÍÅÒ ÐÏÒÔÁ ÍÁ¤ ÂÕÔÉ ÞÉÓÌÏ×ÉÍ"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"úÁÐÏ×ΦÔØ ÇÒÁÆÉ ¦ÎÆÏÒÍÁæ§ ÐÒÏ ÐÒÏËÓ¦ ftp\n"
-"úÁÌÉÛ¦ÔØ §È ÐÏÒÏÖΦÍÉ, ÑËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÐÒÏËÓ¦ ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "÷ÉÇÌÑÄ URL ÍÁ¤ ÂÕÔÉ 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"âÕÄØ ÌÁÓËÁ, ÚÁÐÏ×ΦÔØ ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ ÔÁ ÐÁÒÏÌØ, ÑËÝÏ ×ÏÎÉ ¤.\n"
-"ñËÝÏ Î¦ - ÚÁÌÉÛÔÅ §È ÐÏÒÏÖΦÍÉ"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "ÒŤÓÔÒÁæÑ"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ÐÁÒÏÌØ"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ÝÅ ÒÁÚ ÐÁÒÏÌØ"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "ðÁÒÏ̦ Ò¦ÚΦ. óÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ."
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "îÅ ÍÏÖÕ ÄÏÄÁÔÉ Ð¦ÄÒÏÚÄ¦Ì ÄÏ _ÆÏÒÍÁÔÏ×ÁÎÏÇÏ_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "îÅ ÍÏÖÕ ÚÁÐÉÓÁÔÉ ÆÁÊÌ %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "ÚÂ¦Ê Õ mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "ÚÂ¦Ê Õ mkraid (ÍÏÖÌÉ×Ï ÎÅ ×ÓÔÁÎÏ×ÌÅΦ raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "îÅÄÏÓÔÁÔÎØÏ Ð¦ÄÒÏÚÄ¦Ì¦× ÄÌÑ RAID Ò¦×ÎÑ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "úÁÐÕÓË Ú×ÕËÏ×ϧ ÓÉÓÔÅÍÉ ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron ÓÌÕÖÉÔØ ÄÌÑ ÐÅÒ¦ÏÄÉÞÎÏÇÏ ×ÉËÏÎÁÎÎÑ ËÏÍÁÎÄ."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ÓÌÕÖÉÔØ ÄÌÑ ËÏÎÔÒÏÌÀ ÚÁ Ò¦×ÎÅÍ ÂÁÔÁÒŧ ÔÁ ÚÁÐÉÓÕ ÐÏצÄÏÍÌÅÎØ ÐÒÏ\n"
-"ÃÅ Õ ÓÉÓÔÍÎÉÊ ÖÕÒÎÁÌ syslog. ëÒ¦Í ÃØÏÇÏ ×¦Î ÍÏÖÅ ×ÉÍÉËÁÔÉ ËÏÍÐ'ÀÔÅÒ,\n"
-"ËÏÌÉ ÂÁÔÁÒÅÑ ÒÏÚÒÑÄÉÌÁÓÑ."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"÷ÉËÏÎÕ¤ ËÏÍÁÎÄÉ, ÚÁÐÌÁÎÏ×ÁΦ ËÏÍÁÎÄÏÀ at Ð¦Ä ÞÁÓ ×ÉËÏÎÁÎÎÑ ËÏÍÁÎÄÉ at\n"
-"¦ ×ÉËÏÎÕ¤ ÐÁËÅÔΦ ËÏÍÁÎÄÉ, ËÏÌÉ ÓÉÓÔÅÍÎÅ ÎÁ×ÁÎÔÁÖÅÎÎÑ ÄÏÓÔÁÔÎØÏ\n"
-"ÎÉÚØËÅ. "
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron - ÃÅ ÓÔÁÎÄÁÒÔÎÁ ÐÒÏÇÒÁÍÁ UNIX, ÑËÁ ×ÉËÏÎÕ¤ ×ÉÂÒÁΦ ËÏÒÉÓÔÕ×ÁÞÅÍ\n"
-"ÐÒÏÇÒÁÍÉ ÐÅÒ¦ÏÄÉÞÎÏ Õ ×ÉÂÒÁÎÉÊ ÞÁÓ. vixie cron ÄÏÄÁ¤ ÄÏ ÓÔÁÎÄÁÒÔÎÏÇÏ\n"
-"UNIX cron ˦ÌØËÁ ÎÏ×ÉÈ ÍÏÖÌÉ×ÏÓÔÅÊ, ×ËÌÀÞÁÀÞÉ Ð¦Ä×ÉÝÅÎÕ ÂÅÚÐÅËÕ ÔÁ\n"
-"¦ÌØÛ ÐÏÔÕÖΦ ËÏÎƦÇÕÒÁæÊΦ ÏÐæ§."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ÄÏÄÁ¤ ЦÄÔÒÉÍËÕ ÍÉÛËÉ ÄÏ ÔÅËÓÔÏ×ÉÈ ÐÒÏÇÒÁÍ Õ ì¦ÎÁËÓ¦, ÔÁËÉÈ ÑË,\n"
-"ÎÁÐÒÉËÌÁÄ, Midnight Commander. äÏÄÁ¤ ÔÁËÏÖ ÍÏÖÌÉ×ÏÓÔ¦ \"cut-and-paste\"\n"
-"ÄÏ ÐÒÏÇÒÁÍ, ÝÏ ÐÒÁÃÀÀÔØ ÎÁ ËÏÎÓÏ̦, ×ËÌÀÞÁÀÞÉ Ð¦ÄÔÒÉÍËÕ ÍÅÎÀ ÎÁ\n"
-"ËÏÎÓÏ̦."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ×ÉËÏÎÕ¤ ÔÅÓÔÕ×ÁÎÎÑ ÁÐÁÒÁÔÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ ¦ ÑËÝÏ ÐÏÔÒ¦ÂÎÏ\n"
-"ËÏÎƦ­ÕÒÕ¤ ÎÏ×Å ÁÂÏ ÚͦÎÅÎÅ ÁÐÁÒÁÔÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - ÃÅ ÓÅÒ×ÅÒ  ÄÌÑ World Wide Web. ÷¦Î ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÎÁÄÁÎÎÑ "
-"ÓÅÒצӦ×\n"
-"ÄÌÑ ÆÁÊÌ¦× HTML ÔÁ CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"óÕÐÅÒÓÅÒ×ÅÒ ÄÅÍÏÎ (¦ÌØÛ ×¦ÄÏÍÉÊ Ð¦Ä ÎÁÚ×ÏÀ inetd) ÓÌÕÖÉÔØ ÄÌÑ ÚÁÐÕÓËÕ\n"
-"Ò¦ÚÎÏÍÁΦÔÎÉÈ ÓÅÒ×¦Ó¦× ¶ÎÔÅÒÎÅÔÕ, ËÏÌÉ ÃÅ ÎÅÏÂȦÄÎÏ. ÷¦Î\n"
-"צÄÐÏצÄÁÌØÎÉÊ ÚÁ ÓÔÁÒÔ ÂÁÇÁÔØÏÈ ÓÅÒצӦ×, ÔÁËÉÈ ÑË telnet, ftp, rsh,\n"
-"ÔÁ rlogin. ðÒÉ ÎÅÐÒÁÃÀÀÞÏÍÕ ÓÅÒ×ÅÒ¦ inetd ÎÅ ÂÕÄÕÔØ ÔÁËÏÖ ÐÒÁÃÀ×ÁÔÉ\n"
-"×Ó¦ ¦ÎÛ¦ ÓÅÒצÓÉ."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"úÁÐÕÓËÁ¤ ÍÅÈÁΦÚÍ Æ¦ÌØÔÒÕ×ÁÎÎÑ ÐÁËÅÔ¦× ÄÌÑ ÑÄÒÁ 2.2 ì¦ÎÁËÓÁ, ÄÌÑ ÔÏÇÏ\n"
-"ÝÏ ÍÁÔÉ ÚÁÈÉÓÔ ÔÉÐÕ firewall ÎÁ ×ÁÛ¦Ê ÓÉÓÔÅͦ."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"ãÅÊ ÐÁËÅÔ ÚÁ×ÁÎÔÁÖÕ¤ ×ÉÂÒÁÎÕ ÒÏÚËÌÁÄËÕ ËÌÁצÁÔÕÒÉ, ÑËÁ ×ÓÔÁÎÏ×ÌÀ¤ÔØÓÑ\n"
-"× /etc/sysconfig/keyboard. ãÑ ËÌÁצÁÔÕÒÁ ÍÏÖÅ ÂÕÔÉ ×ÉÂÒÁÎÁ ÚÁ\n"
-"ÄÏÐÏÍÏÇÏÀ ÐÒÏÇÒÁÍÉ kbdconfig. ëÒÁÝÅ ÚÁÌÉÛÉÔÉ ÃÅÊ ÐÁËÅÔ ÐÒÁÃÀÀÞÉÍ ÎÁ\n"
-"¦ÌØÛÏÓÔ¦ ÓÉÓÔÅÍ."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"á×ÔÏÍÁÔÉÞÎÅ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌ¦× ÚÁÇÏÌÏ×Ë¦× ÄÌÑ ÑÄÒÁ × ËÁÔÁÌÏÚ¦ /boot ÄÌÑ\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"á×ÔÏÍÁÔÉÞÎÅ ×ÉÚÎÁÞÅÎÎÑ ÔÁ ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ÁÐÁÒÁÔÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ ÐÒÉ\n"
-"ÚÁ×ÁÎÔÁÖÅÎΦ."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf Õ ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ÂÕÄÅ ×ÉËÏÎÕ×ÁÔÉ ÐÅ×Φ ÐÒÏÃÅÄÕÒÉ Ð¦Ä ÞÁÓ\n"
-"ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ ÝÏ ÚÁÂÅÚÐÅÞÉÔÉ Ð¦ÄÔÒÉÍÁÎÎÑ Ã¦Ì¦ÓÎÏÓÔ¦\n"
-"ËÏÎƦ­ÕÒÁæ§ ÓÉÓÔÅÍÉ."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd - ÃÅ ÄÅÍÏÎ ÄÒÕËÕ, ÑËÉÊ ÚÁÂÅÚÐÅÞÕ¤ ÒÏÂÏÔÕ lpr. æÁËÔÉÞÎÏ ×¦Î ¤\n"
-"ÓÅÒ×ÅÒÏÍ, ÑËÉÊ ÎÁÄÓÉÌÁ¤ ÒÏÂÏÔÕ ÄÌÑ ÄÒÕËÕ×ÁÎÎÑ ÎÁ ÐÒÉÎÔÅÒ¦."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÐÏÂÕÄÏ×É ×ÉÓÏËÏÎÁĦÊÎÏÇÏ\n"
-"ÓÅÒ×ÅÒÁ Ú ×ÉÓÏËÏÀ ÐÒÏÄÕËÔÉ×ΦÓÔÀ."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) - ÃÅ óÅÒ×ÅÒ îÁÚ× äÏÍÅÎ¦× (Domain Name Server, DNS), ÑËÉÊ\n"
-"ÓÌÕÖÉÔØ ÄÌÑ ×ÉÚÎÁÞÅÎÎÑ ÎÁÚ× ÈÏÓÔ¦× ÚÁ IP ÁÄÒÅÓÁÍÉ ÔÁ ÎÁ×ÐÁËÉ."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"íÏÎÔÕ¤ ÔÁ ÒÏÚÍÏÎÔÏ×Õ¤ ×Ó¦ ÆÁÊÌÏצ ÓÉÓÔÅÍÉ ÔÉÐÕ Network File System\n"
-"(NFS), SMB (Lan Manager/Windows) ÔÁ NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"áËÔÉצÚÕ¤ ÔÁ ÄÅÁËÔÉצÚÕ¤ ×Ó¦ ¦ÎÔÅÒÆÅÊÓÉ ÍÅÒÅÖ¦, Ñ˦ ÎÁÓÔÒϤΦ\n"
-"ÓÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ÃÅ ÄÕÖÅ ÐÏÐÕÌÑÒÎÉÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÆÁÊÌ¦× ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒÁÈ, Ú'¤ÄÎÁÎÉÈ ÍÅÒÅÖÅÀ TCP/IP. ãÅÊ ÓÅÒ×¦Ó ÚÁÂÅÚÐÅÞÕ¤ NFS\n"
-"ÓÅÒ×ÅÒ, ÑËÉÊ ËÏÎƦ­ÕÒÕ¤ÔØÓÑ ÚÁ ÄÏÐÏÍÏÇÏÀ ÆÁÊÌÁ /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS - ÃÅ ÄÕÖÅ ÐÏÐÕÌÑÒÎÉÊ ÐÒÏÔÏËÏÌ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÆÁÊÌ¦× ÎÁ\n"
-"ËÏÍÐ'ÀÔÅÒÁÈ, Ú'¤ÄÎÁÎÉÈ ÍÅÒÅÖÅÀ TCP/IP. ãÅÊ ÓÅÒ×¦Ó ÚÁÂÅÚÐÅÞÕ¤\n"
-"ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÎÎÑ ÚÁÍÉËÁÎÎÑÍ ÆÁÊ̦×."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"á×ÔÏÍÁÔÉÞÎÏ ×ËÌÀÞÉÔÉ NumLock ÎÁ ËÏÎÓÏ̦ ¦ × XFree \n"
-"ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ð¦ÄÔÒÉÍËÁ ÄÌÑ OKI 4w ¦ ÐÏĦÂÎÉÈ win ÐÒÉÎÔÅÒ¦×."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ЦÄÔÒÉÍËÁ ÐÏÔÒ¦ÂÎÁ × ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÚÁÂÅÚÐÅÞÅÎÎÑ ÒÏÂÏÔÉ ÔÁËÉÈ\n"
-"ÒÅÞÅÊ, ÑË ethernet ÔÁ ÍÏÄÅÍ × ÐÅÒÅÎÏÓÎÉÈ ËÏÍÐ'ÀÔÅÒÁÈ. ðÁËÅÔ ÎÅ ÐÏÞÎÅ\n"
-"ÐÒÁÃÀ×ÁÔÉ, ÑËÝÏ ÊÏÇÏ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ. ïÔÖÅ, ÊÏÇÏ ÂÅÚÐÅÞÎÏ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÎÁ ËÏÍÐ'ÀÔÅÒÁÈ, ÎÁצÔØ ÑËÝÏ ×¦Î ÎÅ ÂÕÄÅ\n"
-"×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉÓÑ."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ËÅÒÕ¤ Ú'¤ÄÎÁÎÎÑÍÉ Ú ÐÒÏÔÏËÏÌÏÍ RPC, Ñ˦ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ\n"
-"ÔÁËÉÍÉ ÐÒÏÔÏËÏÌÁÍÉ, ÑË NFS ÔÁ NIS. portmaper ÐÏ×ÉÎÅÎ ÐÒÁÃÀ×ÁÔÉ ÎÁ\n"
-"ÍÁÛÉÎÁÈ, Ñ˦ ¤ ÓÅÒ×ÅÒÁÍÉ ÄÌÑ ÐÒÏÔÏËÏ̦×, ÝÏ ËÏÒÉÓÔÕÀÔØÓÑ RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix - ÃÅ ÐÒÏÇÒÁÍÁ ÄÌÑ ÐÅÒÅÄÁÞ¦ ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ (Mail Transport\n"
-"Agent), ÑËÁ ÐÅÒÅÄÁ¤ ÐÏÛÔÏצ ÐÏצÄÏÍÌÅÎÎÑ ×¦Ä ÏÄÎÏÇÏ ËÏÍÐ'ÀÔÅÒÁ ÄÏ\n"
-"¦ÎÛÏÇÏ."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"úÂÅÒ¦ÇÁ¤ ¦ צÄÎÏ×ÌÀ¤ ÄÖÅÒÅÌÏ ÅÎÔÒÏЦ§ × ÓÉÓÔÅͦ, ÔÉÍ ÓÁÍÉÍ Ð¦Ä×ÉÝÕÀÞÉ\n"
-"Ñ˦ÓÔØ ­ÅÎÅÒÁæ§ ×ÉÐÁÄËÏ×ÉÈ ÞÉÓÅÌ."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"ðÏÓÔÁ×ÉÔÉ \"ÓÉÒ¦\" ÆÁÊÌÉ ÓÐÅæÁÌØÎÉÈ ÐÒÉÓÔÒÏ§× Õ ×¦ÄÐÏצÄΦÓÔØ ÄÏ\n"
-"ÂÌÏÞÎÉÈ ÐÒÉÓÔÒÏ§× (ÑË, ÎÁÐÒÉËÌÁÄ, ЦÄÒÏÚĦÌÉ ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ) ÄÌÑ\n"
-"×ÉËÏÒÉÓÔÁÎÎÑ × ÐÒÏÇÒÁÍÁÈ ÐÏĦÂÎÉÈ ÄÏ Oracle."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"äÅÍÏÎ routed ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Á×ÔÏÍÁÔÉÞÎÉÍ ÐÏÎÏ×ÌÅÎÎÑÍ\n"
-"ÔÁÂÌÉæ ÍÁÒÛÒÕÔÉÚÁæ§ IP ÚÁ ÄÏÐÏÍÏÇÏÀ ÐÒÏÔÏËÏÌÁ RIP. ðÒÏÔÏËÏÌ RIP\n"
-"ÛÉÒÏËÏ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÎÁ ÎÅ×ÅÌÉËÉÈ ÍÅÒÅÖÁÈ, × ÔÏÊ ÞÁÓ, ÑË ÎÁ ¦ÌØÛ\n"
-"ÓËÌÁÄÎÉÈ ÎÅÏÂȦÄÎÅ ÚÁÓÔÏÓÕ×ÁÎÎÑ Â¦ÌØÛ ÒÏÚ×ÉÎÅÎÉÈ ÐÒÏÔÏËÏ̦×\n"
-"ÍÁÒÛÒÕÔÉÚÁæ§."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"ðÒÏÔÏËÏÌ rstat ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÞÁÍ × ÍÅÒÅÖ¦ ÏÔÒÉÍÕ×ÁÔÉ ÄÁΦ\n"
-"ÐÒÏ ÚÁ×ÁÎÔÁÎÎÑ ÂÕÄØ-ÑËÏÇÏ ËÏÍÐ'ÀÔÅÒÁ × Ã¦Ê ÍÅÒÅÖ¦."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"ðÒÏÔÏËÏÌ rusers ÄÁ¤ ÍÏÖÌÉצÓÔØ ËÏÒÉÓÔÕ×ÁÞÁÍ × ÍÅÒÅÖ¦ ÏÔÒÉÍÕ×ÁÔÉ\n"
-"¦ÎÆÏÒÍÁæÀ ÐÒÏ ÔÅ, ÈÔÏ Ú ËÏÒÉÓÔÕ×ÁÞ¦× ÚÁÒŤÓÔÒÏ×ÁÎÉÊ ÎÁ ÓÉÓÔÅÍÁÈ, ÝÏ\n"
-"צÄÐÏצÄÁÀÔØ ÎÁ ÚÁÐÉÔÉ."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"ðÒÏÔÏËÏÌ rwho ×ÉÄÁ¤ ËÏÒÉÓÔÕ×ÁÞÁÍ ÎÁ צÄÄÁÌÅÎÉÈ ÓÉÓÔÅÍÁÈ ¦ÎÆÏÒÍÁæÀ ÐÒÏ\n"
-"×Ó¦È ËÏÒÉÓÔÕ×ÁÞ¦× ÚÁÒŤÓÔÒÏ×ÁÎÉÈ × ÓÉÓÔÅͦ, ÑËÁ ÍÁ¤ ÄÅÍÏÎ rwho\n"
-"(ÐÏĦÂÎÉÊ ÄÏ ÄÅÍÏÎÁ finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "úÁÐÕÓË Ú×ÕËÏ×ϧ ÓÉÓÔÅÍÉ ÎÁ ×ÁÛ¦Ê ÍÁÛÉΦ"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"syslog - ÃÅ ÓÅÒ×¦Ó × ÓÉÓÔÅͦ, ÚÁ ÄÏÐÏÍÏÇÏÀ ÑËÏÇÏ ÄÅÍÏÎÉ ÚÁÐÉÓÕÀÔØ\n"
-"ÓÉÓÔÅÍΦ ÐÏצÄÏÍÌÅÎÎÑ Õ Ò¦ÚΦ ÓÉÓÔÅÍΦ ÆÁÊÌÉ ÒŤÓÔÒÁæ§ ÐÏצÄÏÍÌÅÎØ. ÷\n"
-"ÂÕÄØ-ÑË¦Ê ÓÉÓÔÅͦ ÎÅÐÏÇÁÎÏ ÍÁÔÉ syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "úÁ×ÁÎÔÁÖÉÔÉ ÄÒÁÊ×ÅÒÉ ÄÌÑ ÐÒÉÓÔÒÏ§× usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"óÔÁÒÔÕ¤ ÔÁ ÚÕÐÉÎѤ ÓÅÒ×ÅÒ ÛÒÉÆÔ¦× ÄÌÑ X (ÏÂÏ×'ÑÚËÏ×Å ÄÌÑ ÒÏÂÏÔÉ\n"
-"ÓÅÒ×ÅÒÁ XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ, Ñ˦ ÓÅÒצÓÉ ÍÁÀÔØ ÓÔÁÒÔÕ×ÁÔÉ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "äÒÕË"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "¶ÎÔÅÒÎÅÔ"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ïÐæ§ צÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "âÁÚÁ ÄÁÎÉÈ"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "óÅÒ×ÅÒ"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ÐÒÁÃÀÀ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ÚÕÐÉÎÅÎÏ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "óÅÒצÓÉ ÔÁ ÄÅÍÏÎÉ"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"÷ÉÂÁÞÔÅ, ÎÅÍÁ¤ ÄÏÄÁÔËÏ×ϧ \n"
-"¦ÎÆÏÒÍÁæ§ ÐÒÏ ÃÅÊ ÓÅÒצÓ."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "ðÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "óÔÁÔÕÓ"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "óÅËÔÏÒ"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "ðÒÏÔÏËÏÌ ÄÌÑ ×ÓØÏÇÏ ¦ÎÛÏÇÏ ÓצÔÕ"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "äÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - ÇÒÁƦËÁ"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "òÏÚÒÏÂÎÉË"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "ãÅÎÔÒ ËÅÒÕ×ÁÎÎÑ"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "¶ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "îÁÚ×Á ÈÏÓÔÁ SMB ÓÅÒ×ÅÒÁ"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "¶ÇÒÉ"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "ÅËÓÐÅÒÔ"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "×ÉÚÎÁÞÁÌØÎÉÊ"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "õÓÔÁÎÏ×ËÁ ÐÁËÅÔÕ %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"îÅ ÍÏÖÕ ÐÒÏÞÉÔÁÔÉ ÔÁÂÌÉÃÀ ЦÄÒÏÚĦ̦×, ×ÏÎÁ ÚÁÎÁÄÔÏ Ú¦ÐÓÏ×ÁÎÁ ÄÌÑ\n"
-"ÍÅÎÅ :(\n"
-"ñ ÓÐÒÏÂÕÀ ÓÔÅÒÔÉ Ú¦ÐÓÏ×ÁΦ ЦÄÒÏÚĦÌÉ"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "ðÏÍÉÌËÁ!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÉÊ ÆÁÊÌ ¦Ú ÚÏÂÒÁÖÅÎÎÑÍ `%s'"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ Á×ÔÏÍÁÔÉÞÎϧ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"÷É ÍÏÖÅÔÅ ÚÁÒÁÚ ÎÁÓÔÒϧÔÉ ÄÉÓËÅÔÕ ÄÌÑ Á×ÔÏÍÁÔÉÚÏ×ÁÎϧ ÕÓÔÁÎÏËÉ. ãÅÊ\n"
-"ÒÅÖÉÍ ÕÓÔÁÎÏ×ËÉ ÄÅÝÏ ÎÅÂÅÚÐÅÞÎÉÊ ¦ ÎÉÍ ÔÒÅÂÁ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-"ÐÏͦÒËÏ×ÁÎÏ.\n"
-"\n"
-"ëÏÒÉÓÔÕÀÞÉÓØ ÃÉÍ ÒÅÖÉÍÏÍ ÷É ÍÏÖÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ, ÝÏ ÷É\n"
-"Ô¦ÌØËÉ-ÝÏ ×ÉËÏÎÁÌÉ ÎÁ ÄÁÎ¦Ê ÓÉÓÔÅͦ. îÁ ÄÅÑËÉÈ ÅÔÁÐÁÈ ÷ÁÍ ÂÕÄÕÔØ\n"
-"ÚÁÄÁΦ ÚÁÐÉÔÁÎÎÑ, ÝÏ ÚͦÎÉÔÉ ÚÎÁÞÅÎÎÑ Ë¦ÌØËÏÈ ÚͦÎÎÉÈ.\n"
-"\n"
-"äÌÑ ÷ÁÛϧ ÂÅÚÐÅËÉ, ÐÏÄ¦Ì ÄÉÓËÕ ÎÁ ЦÄÒÏÚĦÌÉ ¦ ÆÏÒÍÁÔÕ×ÁÎÎÑ Î¦ËÏÌÉ ÎÅ\n"
-"ÂÕÄÅ ×ÉËÏÎÕ×ÁÔÉÓØ Á×ÔÏÍÁÔÉÞÎÏ ÎÅÚÁÌÅÖÎÏ ×¦Ä ÔÏÇÏ, ÝÏ ×ÉÂÒÁÎÏ ÐÒÉ\n"
-"ÕÓÔÁÎÏ×æ.\n"
-"\n"
-"èÏÞÅÔÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉ? "
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ËÒÏË¦× ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"äÌÑ ËÏÖÎÏÇÏ ËÒÏËÕ, ÂÕÄØ ÌÁÓËÁ, ×ËÁÖ¦ÔØ ÞÉ ÐÒÉ ÐÏ×ÔÏÒÎ¦Ê ÕÓÔÁÎÏ×æ ÃÅÊ\n"
-"ËÒÏË ×ÉËÏÎÁ¤ÔØÓÑ Á×ÔÏÍÁÔÉÞÎÏ, ÞÉ ×ÒÕÞÎÕ."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "÷¦ÔÁÎÎÑ!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"äÉÓËÅÔÁ ÓÔ×ÏÒÅÎÁ ÕÓЦÛÎÏ.\n"
-"÷É ÍÏÖÅÔÅ ÐÏ×ÔÏÒÉÔÉ ÕÓÔÁÎÏ×ËÕ."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "óÔÅÒÔÉÆÁÊÌÕ Ú×ÏÒÏÔÎØÏÇÏ ÍÏÎÔÕ×ÁÎÎÑ?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "óÔÅÒÔÉ Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "âÕÄØ-ÌÁÓËÁ, ÓÐÒÏÂÕÊÔÅ ÝÅ ÒÁÚ"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "ÝÅ ÒÁÚ ÐÁÒÏÌØ"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "ú'¤ÄÎÁÎÎÑ ÞÅÒÅÚ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ ÐÒÉÎÔÅÒÁ"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "íÅÒÅÖÁ:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÏÐÔÉͦÚÁæ¤À ÄÉÓËÕ?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÏÐÔÉͦÚÁæ¤À ÄÉÓËÕ?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "þÅËÁÊÔÅ"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "ëÏ̦ÝÁÔËÏ"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "ëÏ̦ÝÁÔËÏ"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "ïÐæ§ ÍÏÄÕÌÑ:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "íÅÒÅÖÁ:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "õÓÔÁÎÏ×ËÁ ÆÁÊÌ. ÓÉÓÔÅÍ"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "ðÁÒÁÍÅÔÒÉ"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "÷ÉÂÅÒ¦ÔØ ÄÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÁ ЦÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÄÉÓËÅÔÉ"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "¶ÎÛ¦"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "óÐÅæÁÌØÎÉÊ"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_ð¦ÄËÁÚËÁ"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- ðÏÐÅÒÅÄΦÊ"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "óÔÁÔÕÓ"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "÷¦ÄÎÏ×ÉÔÉ Ú ÆÁÊÌÕ"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "ôÅËÓÔ"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÍÏ×Õ."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "úÁÐÉÓÁÔÉ × ÆÁÊÌ"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ, ÂÕÄØ-ÌÁÓËÁ"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "ëÏÎƦ­ÕÒÁæÑ"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "õÓÔÁÎÏ×ËÁ ÆÁÊÌ. ÓÉÓÔÅÍ"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "õÓÔÁÎÏ×ËÁ %s ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "îÅ ÚÎÁÊÄÅÎÏ %s."
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "úÁ˦ÎÞÅÎÏ"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ ÄÉÓËÅÔÕ"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "ð¦ÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ÏÂÍÅÖÉÔÉ"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "äŦÎÓÔÁÌÀÀ RPM'É"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "ôÏÞËÁ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌÉ, Ñ˦ ÷É ÈÏÞÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "ïƦÓÎÁ ÓÔÁÎæÑ"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "÷¦ÄͦÎÉÔÉ"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "ðÒÉÎÔÅÒ"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "÷ÉÄÁÌÉÔÉ ÐÒÉÎÔÅÒ"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "ðÏצÄÏÍÌÅÎÎÑ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "õÓÔÁÎÏ×ËÁ"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "óЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÍÉËÎÅÎÅ"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ\n"
-"ÚÒÏÂÌÅÎÁ. óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ ÄÏÚ×ÏÌÅÎÅ.\n"
-"\n"
-"ýÏ ÷É ÂÁÖÁ¤ÔÅ ÚÒÏÂÉÔÉ?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "ÚÁÂÏÒÏÎÉÔÉ"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ÐÒÉÂÒÁÔÉ"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ÐÅÒÅÎÁÓÔÒϧÔÉ"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "úÁÂÏÒÏÎÁ ÓÅÒ×ÅÒ¦×..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÉÍËÎÅÎÅ"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÉÍËÎÅÎÅ"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ\n"
-"ÚÒÏÂÌÅÎÁ. óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ × ÄÁÎÉÊ ÍÏÍÅÎÔ ×ÉÍËÎÅÎÅ.\n"
-"\n"
-"ýÏ ÷É ÂÁÖÁ¤ÔÅ ÚÒÏÂÉÔÉ?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ÄÏÚ×ÏÌÉÔÉ"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "÷ÍÉËÁÀ ÓÅÒ×ÅÒÉ..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÍÉËÎÅÎÅ"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"ôÅÐÅÒ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÐÁÒÁÍÅÔÒÉ ÷ÁÛÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ\n"
-"×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔÅ ÓËÏƦ­ÕÒÕ×ÁÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ ÔÁËÉÍ ÞÉÎÏÍ, ÝÏÂ\n"
-"צΠÄÏÚ×ÏÌÑ× ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ ÄÏ\n"
-"¶ÎÔÅÒÎÅÔÕ. \n"
-"\n"
-"ðÒÉͦÔËÁ: ÷ÁÍ ÄÌÑ ÃØÏÇÏ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ÐÌÁÔÕ ÍÅÒÅÖ¦, ÝÏ ÎÁÓÔÒϧÔÉ\n"
-"ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¶ÎÔÅÒÆÅÊÓ %s (Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ ÍÏÄÕÌÑ %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "¶ÎÔÅÒÆÅÊÓ %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÎÅÍÁ¤ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ÁÄÁÐÔÅÒÁ ÍÅÒÅÖ¦\n"
-"ethernet. óËÏÒÉÓÔÁÊÔÅÓØ, ÂÕÄØ-ÌÁÓËÁ, ÐÒÏÇÒÁÍÏÀ ÄÌÑ ËÏÎƦÇÕÒÁæ§\n"
-"ÁÐÁÒÁÔÎÉÈ ÚÁÓϦ×."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "¶ÎÔÅÒÆÅÊÓ ÍÅÒÅÖ¦"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ÐÒÉÓÕÔÎ¦Ê Ô¦ÌØËÉ ÏÄÉÎ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦:\n"
-"\n"
-"%s\n"
-"\n"
-"úÁÒÁÚ ÂÕÄÅ ×ÓÔÁÎÏ×ÌÅÎÁ ÌÏËÁÌØÎÁ ÍÅÒÅÖÁ Ú ÃÉÍ ÁÄÁÐÔÅÒÏÍ."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÑËÉÊ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦ ÂÕÄŠЦÄËÌÀÞÅÎÏ ÄÏ ÌÏËÁÌØÎϧ\n"
-"ÍÅÒÅÖ¦."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "íÏΦÔÏÒ ÎÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÉÊ"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "á×ÔÏÍÁÔÉÞÎÁ ËÏÎƦ­ÕÒÁÃ¦Ñ CUPS"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "úͦÎÉÔÉ ËÏÎƦÇÕÒÁæÀ ÐÒÉÎÔÅÒÁ"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ÁÄÒÅÓÁ CUPS ÓÅÒ×ÅÒÁ"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "÷ ÄÁÎ¦Ê ËÏÎƦÇÕÒÁæ§ %s ÚÎÁÊÄÅÎÏ ÐÏÔÅÎæÊÎÉÊ ËÏÎÆ̦ËÔ ÁÄÒÅÓÉ ÍÅÒÅÖ¦!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "úÎÁÊÄÅÎÏ ËÏÎƦ­ÕÒÁæÀ firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"õ×ÁÇÁ! úÎÁÊÄÅÎÁ ¦ÓÎÕÀÞÁ ËÏÎƦ­ÕÒÁÃ¦Ñ firewall. íÏÖÌÉ×Ï ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-"ÂÕÄÅ ×ÉËÏÎÁÔÉ ÄÅÑ˦ ÚͦÎÉ Ð¦ÓÌÑ ÕÓÔÁÎÏ×ËÉ."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "ëÏÎƦÇÕÒÁæÑ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÓËÒÉÐÔ¦×, ÕÓÔÁÎÏ×ËÁ ÐÒÏÇÒÁÍ, ÓÔÁÒÔÕ×ÁÎÎÑ ÓÅÒ×ÅÒ¦×..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "ðÏÍÉÌËÉ ÐÒÉ ÕÓÔÁÎÏ×æ ÐÁËÅÔÕ %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"÷ÓÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ.  \n"
-"\n"
-"÷É ÍÏÖÅÔÅ ÓЦÌØÎÏ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ÒÁÚÏÍ Ú ¦ÎÛÉÍÉ\n"
-"ËÏÍÐ'ÀÔÅÒÁÍÉ × ×ÁÛ¦Ê ÌÏËÁÌØÎ¦Ê ÍÅÒÅÖ¦, Ú ×ÉËÏÒÉÓÔÁÎÎÑÍ Á×ÔÏÍÁÔÉÞÎÏÇÏ\n"
-"ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ÍÅÒÅÖ¦ (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ ÚÒÏÂÌÅÎÁ,\n"
-"ÁÌÅ ÎÁ ÄÁÎÉÊ ÍÏÍÅÎÔ ×ÏÎÏ ×¦ÄËÌÀÞÅÎÏ."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"õÓÔÁÎÏ×ËÁ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ×ÖÅ ÚÒÏÂÌÅÎÁ,\n"
-"ÎÁ ÄÁÎÉÊ ÞÁÓ ×ÏÎÏ ÄÏÚ×ÏÌÅÎÏ."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "óЦÌØÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú ¦ÎÔÅÒÎÅÔÏÍ ÓËÏÎƦÇÕÒÏ×ÁÎÏ"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÓЦÌØÎÏÇÏ ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ."
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ÐÒÏÇÒÁÍÉ ËÏÎƦ­ÕÒÁæ§ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ\n"
-"Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ\n"
-"\n"
-"%s\n"
-"\n"
-"ëÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\" ÝÏ ÚÁÐÕÓÔÉÔÉ ËÏÎƦ­ÕÒÁÔÏÒ."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ÍÅÒÅÖ¦ (%d ÐÌÁÔ)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "ðÒÏƦÌØ: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "óÔÅÒÔÉ ÐÒÏƦÌØ..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "ðÒÏƦÌØ ÄÌÑ ÓÔÉÒÁÎÎÑ:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "îÏ×ÉÊ ÐÒÏƦÌØ..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"îÁÚ×Á ÐÒÏƦÌÀ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ (ÎÏ×ÉÊ ÐÒÏƦÌØ ÓÔ×ÏÒÀ¤ÔØÓÑ ÑË ËÏÐ¦Ñ ×ÖÅ "
-"¦ÓÎÕÀÞÏÇÏ):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "¶Í'Ñ ÈÏÓÔÁ:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "äÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "ôÉÐ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "ûÌÀÚ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "¶ÎÔÅÒÆÅÊÓ:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "óÔÁÔÕÓ:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "îÁÓÔÒϧÔÉ ÄÏÓÔÕÐ ÄÏ ¦ÎÔÅÒÎÅÔÕ..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÍÅÒÅÖ¦"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "äÒÁÊ×ÅÒ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "¶ÎÔÅÒÆÅÊÓ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "ðÒÏÔÏËÏÌ"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "óÔÁÔÕÓ"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "îÁÓÔÒϧÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "ðÏͦÞÎÉË..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "úÁÓÔÏÓÕ×ÁÔÉ"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ ÌÁÓËÁ. ôÅÓÔÕ×ÁÎÎÑ ËÏÎƦ­ÕÒÁæ§"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "ú'¤ÄÎÁÎÏ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "îÅÍÁ¤ Ú'¤ÄÎÁÎÎÑ"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "ú'¤ÄÎÁÎÎÑ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "÷¦ÄËÌÀÞÅÎÎÑ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"õ ×ÁÓ ÎÅÍÁ¤ ÖÏÄÎÏÇÏ ÓËÏÎƦ­ÕÒÏ×ÁÎÏÇÏ ¦ÎÔÅÒÆÅÊÓÁ.\n"
-"óËÏÎƦ­ÕÒÕÊÔÅ §È ÓÐÏÞÁÔËÕ, ËÌÁÃÎÕ×ÛÉ ÎÁ \"îÁÓÔÒϧÔÉ\""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "ðÌÁÔÁ %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "ðÒÏÔÏËÏÌ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "óÔÁÒÔÕ×ÁÔÉ ÐÒÉ ÚÁ×ÁÎÔÁÖÅÎΦ"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Ë̦¤ÎÔ DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "ÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "ÄÅÁËÔÉצÚÕ×ÁÔÉ ÚÁÒÁÚ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"÷É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ.\n"
-"óÔ×ÏÒ¦ÔØ ÔÁËÅ Ú'¤ÄÎÁÎÎÑ ËÌÁÃÎÕ×ÛÉ ÎÁ \"îÁÓÔÒϧÔÉ\""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "ôÉÐ Ú×'ÑÚËÕ:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "ðÁÒÁÍÅÔÒÉ"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "ûÌÀÚ"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "ðÌÁÔÁ Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "ë̦¤ÎÔ DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "÷ÓÔÁÎÏ×ÌÅÎÎÑ Ò¦×ÎÑ ÂÅÚÐÅËÉ"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ãÅÎÔÒ ËÅÒÕ×ÁÎÎÑ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "÷ÉÂÅÒ¦ÔØ ÚÁÓÏÂÉ, ÑËÉÍÉ ÷É ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "ëÁÎÁÄÓØËÁ (ë×ÅÂÅË)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "´×ÒÏÐÁ"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "¶ÓÌÁÎÄÓØËÁ"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "´×ÒÏÐÁ"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "ÐÏÓ̦ÄÏ×ÎÉÊ"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "×ÉËÏÒÉÓÔÁÎÎÑ: keyboarddrake [--expert] [ËÌÁצÁÔÕÒÁ]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "÷É ÈÏÞÅÔÅ ÝÏ BackSpace ÄÁ×Á× Delete  ÎÁ ËÏÎÓÏ̦?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "úͦΦÔØ ËÏÍÐÁËÔ-ÄÉÓË"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"âÕÄØ-ÌÁÓËÁ, ×ÓÔÁ×ÔÅ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\" Õ ÐÒÉÓÔÒ¦Ê ¦\n"
-"ÎÁÔÉÓΦÔØ çÁÒÁÚÄ Ð¦ÓÌÑ ÃØÏÇÏ.\n"
-"\n"
-"ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÔÁËÏÇÏ ÄÉÓËÕ, ÎÁÔÉÓΦÔØ ÷¦ÄͦÎÉÔÉ, ÝÏ ÎÅ\n"
-"×ÓÔÁÎÏ×ÌÀ×ÁÔÉ Ú ÃØÏÇÏ ÄÉÓËÕ."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "îÅ ÍÏÖÕ ÓÔÁÒÔÕ×ÁÔÉ \"ÖÉ×Å ÐÏÎÏ×ÌÅÎÎÑ\"!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "ðÏËÁÚÕ×ÁÔÉ ÌÉÛÅ ÄÌÑ ÃØÏÇÏ ÄÎÑ"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/æÁÊÌ/_îÏ×ÉÊ"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/æÁÊÌ/_÷¦ÄËÒÉÔÉ"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/æÁÊÌ/_úÁÐÉÓÁÔÉ"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/æÁÊÌ/úͦÎÉÔÉ ÎÁ_Ú×Õ"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/æÁÊÌ/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_ðÁÒÁÍÅÔÒÉ"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/ðÁÒÁÍÅÔÒÉ/ôÅÓÔ"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_H äÏÐÏÍÏÇÁ"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/ð¦ÄËÁÚËÁ/_ðÒÏ..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-koi8-u,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-koi8-u,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ÐÏצÄÏÍÌÅÎÎÑ"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "ÐÏÛÕË"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "úÁӦ ÄÏÇÌÑÄÁÎÎÑ ÷ÁÛÉÈ ÖÕÒÎÁÌØÎÉÈ ÆÁÊ̦×"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "ðÁÒÁÍÅÔÒÉ"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "צÄÐÏצÄÁ¤"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "ÁÌŠΊצÄÐÏצÄÁ¤"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "÷ÉÂÅÒ¦ÔØ ÆÁÊÌ"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "ëÁÌÅÎÄÁÒ"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "úͦÓÔ ÆÁÊÌÕ"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ÂÕÄØ ÌÁÓËÁ ÚÁÖĦÔØ, ÐÒÏÈÏÄÖÅÎÎÑ ÆÁÊÌÕ: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"ìÁÓËÁ×Ï ÐÒÏÓÉÍÏ ÄÏ ËÏÎƦ­ÕÒÁæÊÎϧ ÐÒÏÇÒÁÍÉ ÄÌÑ ÐÒÏËÓ¦.\n"
-"\n"
-"ôÕÔ ÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÐÒÏËÓ¦ ÄÌÑ ÐÒÏÔÏËÏÌ¦× ftp ÔÁ http Ú ÐÁÒÏÌÅÍ\n"
-"ÞÉ ÂÅÚ.  \n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "Ô¦ÎØÏצ"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "÷ÉȦÄ"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "æËÁ×Ï"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "ÆÏÒÍÁÔÕ×ÁÎÎÑ"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "ëÏÎƦÇÕÒÁÃ¦Ñ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "úÂÅÒÅÇÔÉ ÑË.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ÎÅ ÚÎÁÊÄÅÎÏ serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "¶Í¦ÔÕ×Á×ÁÔÉ ÔÒÉ ËÎÏÐËÉ?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "÷ÉÂÅÒ¦ÔØ ÇÒÁƦÞÎÕ ÐÌÁÔÕ"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ firewall!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"úÁÈÉÓÔ\n"
-"\n"
-"÷É ×ÖÅ ÍÁ¤ÔÅ ×ÓÔÁÎÏ×ÌÅÎÉÊ firewall. ýÏ ÚͦÎÉÔÉ ËÏÎƦ­ÕÒÁæÀ ÞÉ\n"
-"צÄͦÎÉÔÉ ÚÁÈÉÓÔ ËÌÁÃΦÔØ ÎÁ \"îÁÓÔÒϧÔÉ\""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"úÁÈÉÓÔ\n"
-"\n"
-"ýÏ ×ÓÔÁÎÏ×ÉÔÉ ÓÔÁÎÄÁÒÔÎÕ ËÏÎƦ­ÕÒÁæÀ firewall, ËÌÁÃΦÔØ ÎÁ\n"
-"\"îÁÓÔÒϧÔÉ\""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "÷ÉÂÅÒ¦ÔØ ÍÏ×Õ"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "÷ÉÚÎÁÞÅÎÎÑ ÔÉÐÕ ÄÉÓËÕ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "óËÏÎƦÇÕÒÕÊÔÅ ÍÉÛÕ"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "÷ÉÂÅÒ¦ÔØ ÔÉÐ ËÌÁצÁÔÕÒÉ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "âÅÚÐÅËÁ"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "õÓÔÁÎÏ×ËÁ ÆÁÊÌ. ÓÉÓÔÅÍ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "æÏÒÍÁÔÕ×ÁÔÉ Ð¦ÄÒÏÚĦÌÉ"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "÷ÉÂ¦Ò ÐÁËÅÔ¦×"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "äÏÄÁÔÉ ËÏÒÉÓÔÕ×ÁÞÁ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "îÁÓÔÒϧÔÉ ÍÅÒÅÖÕ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "îÁÓÔÒϧÔÉ ÓÅÒצÓÉ"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "âÌÏË ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "óÔ×ÏÒÉÔÉ Á×ÁÒ¦ÊÎÕ ÄÉÓËÅÔÕ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "îÁÓÔÒϧÔÉ X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "÷ÉÊÔÉ Ú ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"íÁÎÀÓ¦ÎØËÉÊ ÂÒÁÎÄÍÁÕÅÒ\n"
-"\n"
-"㦠ÕÓÔÁÎÏ×ËÉ ËÏÎƦ­ÕÒÕÀÔØ ÐÅÒÓÏÎÁÌØÎÉÊ ÂÒÁÎÄÍÁÕÅÒ (a.k.a. firewall) ÎÁ\n"
-"ÄÁÎ¦Ê ÍÁÛÉΦ Ú ì¦ÎÁËÓ íÁÎÄÒÅÊË. äÌÑ ÔÏÇÏ, ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÓÅÒÊÏÚÎÉÊ\n"
-"ÐÏÔÕÖÎÉÊ ÂÒÁÎÄÍÁÕÅÒ, Ú×ÅÒΦÔØÓÑ, ÂÕÄØ ÌÁÓËÁ, ÄÏ ÓÐÅæÁ̦ÚÏ×ÁÎÏÇÏ\n"
-"ÄÉÓÔÒÉÂÕÔÉ×Á MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"úÁÒÁÚ ×ÁÍ ÂÕÄÕÔØ ÚÁÄÁΦ ÚÁÐÉÔÁÎÎÑ ÐÒÏ ÓÅÒצÓÉ, Ñ˦ ×É ÈÏÞÅÔÅ ÄÏÚ×ÏÌÉÔÉ\n"
-"ÄÌÑ Ú'¤ÄÎÁÎÎÑ × ¦ÎÔÅÒÎÅÔ¦. ïÂÅÒÅÖÎÏ ÐÏÓÔÁ×ÔÅÓÑ ÄÏ ÃÉÈ ÚÁÐÉÔÁÎØ,\n"
-"ÏÓ˦ÌØËÉ ×¦Ä ÃØÏÇÏ ÚÁÌÅÖÉÔØ ÂÅÚÐÅËÁ ×ÁÛϧ ÓÉÓÔÅÍÉ.\n"
-"\n"
-"ñËÝÏ ×É ÎÁ ÄÁÎÉÊ ÞÁÓ ÎÅ ËÏÒÉÓÔÕ¤ÔÅÓØ ÄÅÑËÉÍÉ Ú ÃÉÈ ÓÅÒצӦ×,\n"
-"ÚÁÂÏÒÏΦÔØ §È ×ÉËÏÒÉÓÔÁÎÎÑ. ð¦ÚΦÛÅ ×É ÚÍÏÖÅÔÅ ÚͦÎÉÔÉ Ó×ÏÀ\n"
-"ËÏÎƦÇÕÒÁæÀ ÂÕÄØ-ËÏÌÉ ÐÒÏÓÔÏ ÝÅ ÒÁÚ ÓËÏÒÉÓÔÕ×Á×ÛÉÓØ Ã¦¤À \n"
-"ÐÒÏÇÒÁÍÏÀ. "
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"þÉ  ÐÒÁÃÀ¤  ÎÁ Ã¦Ê  ÍÁÛÉΦ  ×ÅÂ-ÓÅÒ×ÅÒ,  ÑËÉÊ  ÐÏÔÒ¦ÂÎÏ ÂÁÞÉÔÉ  ×ÓØÏÍÕ\n"
-"¶ÎÔÅÒÎÅÔÕ? ñËÝÏ  ×É ËÏÒÉÓÔÕ¤ÔÅÓØ Ô¦ÌØËÉ ÔÁËÉÍ  ÓÅÒ×ÅÒÏÍ, ÑËÉÊ ÐÏÔÒ¦ÂÎÏ\n"
-"ÂÁÞÉÔÉ Ô¦ÌØËÉ Ú Ã¦¤§ ÍÁÛÉÎÉ, ÍÏÖÅÔÅ ÓÐÏ˦ÊÎÏ ×¦ÄÐÏצÓÔÉ ÔÕÔ \"î¦\"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"þÉ ×É ËÏÒÉÓÔÕ¤ÔÅÓØ ÓÅÒ×ÅÒÏÍ ¦ÍÅÎ ÎÁ Ã¦Ê ÍÁÛÉÎÉ? ñËÝÏ ×É ÎÅ ÒÏÂÉÌÉ\n"
-"ÕÓÔÁÎÏ×ËÉ ÓÅÒ×ÅÒÁ ÄÌÑ ÔÏÇÏ, ÝÏ צÄÐÏצÄÁÔÉ ÎÁ ÚÁÐÉÔÉ IP ÁÄÒÅÓ ×ÓØÏÇÏ\n"
-"¶ÎÔÅÒÎÅÔÕ, צÄÐÏצÄÁÊÔÅ \"î¶\".\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"þÉ ÈÏÞÅÔÅ ×É ÄÏÚ×ÏÌÉÔÉ ×ȦÄΦ Ú'¤ÄÎÁÎÎÑ Ú ×¦ÄËÒÉÔÔÑÍ ÂÅÚÐÅÞÎϧ\n"
-"ËÏÍÁÎÄÎϧ ÏÂÏÌÏÎËÉ (SSH)? ãÅ - ÚÁͦÎÁ telnet, ÑËÉÊ ×É, ÍÏÖÌÉ×Ï,\n"
-"ÚÁÈÏÔ¦ÌÉ Â ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ×¦ÄÄÁÌÅÎϧ ÒŤÓÔÒÁæ§. ñËÝÏ ×É ÚÁÒÁÚ\n"
-"ËÏÒÉÓÔÕ¤ÔÅÓØ telnet'ÏÍ, ×ÁÍ, ÎÁÐÅ×ÎÅ, ÞÁÓ ÐÏÄÕÍÁÔÉ ÐÒÏ ÚÁͦÎÕ ÊÏÇÏ ÎÁ\n"
-"ssh. telnet ÎÅ ÚÁÂÅÚÐÅÞÕ¤ ËÏÄÕ×ÁÎÎÑ ÐÅÒÅÄÁÞ¦ -- ÔÏÂÔÏ ÎÁÐÁÄÎÉËÉ ÍÏÖÕÔØ\n"
-"ÐÒÏÓÌÕÈÁÔÉ ×ÁÛ ÐÁÒÏÌØ × ÔÏÊ ÞÁÓ, ÑË ×É ÎÉÍ ËÏÒÉÓÔÕ¤ÔÅÓØ. ssh ÚÁËÏÄÏ×Õ¤\n"
-"ÐÁÒÏÌØ ¦ ÎÅ ÄÏÚ×ÏÌѤ ÊÏÇÏ \"ЦÄÓÌÕÈÁÔÉ\"."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"þÉ ÈÏÞÅÔÅ ×É ÄÏÚ×ÏÌÉÔÉ ×ȦÄΦ Ú'¤ÄÎÁÎÎÑ ÐÏ telnet? ãÅ - ÄÕÖÅ\n"
-"ÎÅÚÁÈÉÝÅÎÅ Ú'¤ÄÎÁÎÎÑ, ÑË ÂÕÌÏ ÐÏÑÓÎÅÎÏ ÎÁ ÐÏÐÅÒÅÄÎØÏÍÕ ÅËÒÁΦ. íÉ\n"
-"ÎÁÓÔ¦ÊÌÉ×Ï ÒÅËÏÍÅÎÄÕ¤ÍÏ ×¦ÄÐÏצÓÔÉ \"î¦\" ÔÕÔ ¦ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ssh\n"
-"ÚÁͦÓÔØ telnet. \n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"þÉ ×É ËÏÒÉÓÔÕ¤ÔÅÓØ ÔÕÔ ÓÅÒ×ÅÒÏÍ FTP, ÄÏ ÑËÏÇÏ ÐÏ×ÉÎÅÎ ÂÕÔÉ ÄÏÓÔÕÐ Ú\n"
-"¶ÎÔÅÒÎÅÔÕ? ñËÝÏ ÔÁË, ÎÁÓÔ¦ÊÌÉ×Ï ÒÅËÏÍÅÎÄÕ¤ÍÏ, ÝÏ ×É ÎÉÍ ËÏÒÉÓÔÕ×ÁÌÉÓÑ\n"
-"Ô¦ÌØËÉ ÄÌÑ ÁÎÏΦÍÎÉÈ ÐÅÒÅÄÁÞ ÄÁÎÉÈ. âÕÄØ-Ñ˦ ÐÁÒÏ̦, ÐÅÒÅÄÁΦ ÐÏ FTP\n"
-"ÍÏÖÕÔØ ÂÕÔÉ Ð¦ÄÓÌÕÈÁÎÉÍÉ ÎÁÐÁÄÎÉËÁÍÉ, ÏÓ˦ÌØËÉ FTP ÎÅ ËÏÒÉÓÔÕ¤ÔØÓÑ\n"
-"ËÒÉÐÔÏÇÒÁƦ¤À ÄÌÑ ÐÅÒÅÄÁÞ¦ ÐÁÒÏ̦×.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"þÉ Õ ×ÁÓ ÐÒÁÃÀ¤ ÐÏÛÔÏ×ÉÊ ÓÅÒ×ÅÒ? ñËÝÏ ×É ×¦ÄÓÉÌÁ¤ÔÅ ÐÏÛÔÕ ÞÅÒÅÚ pine,\n"
-"mutt ÞÉ ¦ÎÛÉÊ ÐÏÛÔÏ×ÉÊ Ë̦¤ÎÔ, ÝÏ ÐÒÁÃÀ¤ × ÔÅËÓÔÏ×ÏÍÕ ÒÅÖÉͦ, ÓËÏÒ¦ÛÅ\n"
-"×ÓØÏÇÏ ×¦ÄÐÏצÄØ \"ÔÁË\". ÷ ¦ÎÛÏÍÕ ×ÉÐÁÄËÕ - צÄͦΦÔØ ÃÅÊ ÓÅÒצÓ.\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"þÉ ÐÒÁÃÀ¤ Õ ×ÁÓ POP ÁÂÏ IMAP ÓÅÒ×ÅÒÉ? ÷ÏÎÉ ×ÉËÏÒÉÓÔÏ×ÕÀÔØÓÑ ÄÌÑ\n"
-"ÚÁÂÅÚÐÅÞÅÎÎÑ ÄÏÓÔÕÐÕ ËÏÒÉÓÔÕ×ÁÞÁÍ ÄÏ ÅÌÅÔÒÏÎÎϧ ÐÏÛÔÉ ÎÁ Ã¦Ê ÍÁÛÉΦ\n"
-"(צÄͦÎÎÁ ×¦Ä ÐÏÛÔÉ, Ú ×ÅÂ-¦ÎÔÅÒÆÅÊÓÏÍ).\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"÷É ËÏÒÉÓÔÕ¤ÔÅÓØ ÑÄÒÏÍ ×ÅÒÓ¦§ 2.2. ñËÝÏ IP ÁÄÒÅÓÉ ÎÁ ×ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦\n"
-"×ÓÔÁÎÏ×ÌÀÀÔØÓÑ Á×ÔÏÍÁÔÉÞÎÏ, ÃÅ ÐÏÔÒ¦ÂÎÏ ÄÏÚ×ÏÌÉÔÉ. þÉ ÃÅ ÔÁË?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"þÉ ×ÁÛ ËÏÍÐ'ÀÔÅÒ ÓÉÎÈÒÏΦÚÕ¤ÔØÓÑ Ú ¦ÎÛÉÍ × ÍÅÒÅÖ¦? õ ×ÅÌÉËÉÈ ÔÁ\n"
-"ÓÅÒÅÄÎØÏÇÏ ÒÏÚͦÒÕ ËÏÍÐÁΦÑÈ Ú ÓÉÓÔÅÍÁÍÉ àΦËÓ/ì¦ÎÁËÓ ÃÅ\n"
-"×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÄÌÑ ÓÉÎÈÒÏΦÚÁæ§ ÞÁÓÕ ÄÌÑ ÖÕÒÎÁÌ¦× ÒŤÓÔÒÁæ§\n"
-"ÐÒÏÔÏËÏÌ¦× ÔÏÝÏ. ñËÝÏ ×ÁÛÁ ÓÉÓÔÅÍÁ ÎÅ ¤ ÞÁÓÔÉÎÏÀ ¦ÌØÛÏÇÏ ÏƦÓÕ ¦ ×É\n"
-"ΦËÏÌÉ ÎÅ ÞÕÌÉ ÐÒÏ ÔÁËÅ, ÓËÏÒ¦ÛÅ ×ÓØÏÇÏ ×ÁÍ ÃÅ ÎÅ ÐÏÔÒ¦ÂÎÏ."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"ëÏÎƦ­ÕÒÕ×ÁÎÎÑ ÚÁ˦ÎÞÅÎÏ. íÏÖÎÁ ÚÁÐÉÓÁÔÉ Ã¦ ÚͦÎÉ ÎÁ ÄÉÓË?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "îÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ %s ÎÁ ÚÁÐÉÓ: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "úÁÞÅËÁÊÔÅ, ¦ÄŠЦÄÇÏÔÏ×ËÁ ÕÓÔÁÎÏ×ËÉ"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "ôÅÎÅÔÁ/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "íÅÒÅÖÅ×ÉÊ ëÏÍÐ'ÀÔÅÒ (Ë̦¤ÎÔ)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "óÅÒ×ÅÒ NFS, ÓÅÒ×ÅÒ SMB, ÐÒÏËÓ¦-ÓÅÒ×ÅÒ, ÓÅÒ×ÅÒ ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "ïƦÓÎÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "òÏÂÏÞÁ ÓÔÁÎÃ¦Ñ Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "úÁÓÏÂÉ ÄÌÑ Palm Pilot ÔÁ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "òÏÂÏÞÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/íÁÒÛÒÕÔÉÚÁÔÏÒ"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "óÅÒ×ÅÒ ¦ÍÅÎ ÔÁ ÍÅÒÅÖÅ×ÉÊ ¦ÎÆÏÒÍÁæÊÎÉÊ ÓÅÒ×ÅÒ (DNS, NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"ðÒÏÇÒÁÍÉ ÄÌÑ ÏƦÓÕ: ÔÅËÓÔÏצ ÐÒÏÃÅÓÏÒÉ (kword, abiword), ÂÕÈÇÁÌÔÅÒÓØ˦\n"
-"ÔÁÂÌÉæ (kspread, gnumeric), ÐÅÒÅÇÌÑÄÁÞ¦ ÆÁÊÌ¦× pdf, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "ú×ÕËÏצ ÚÁÓÏÂÉ: ÐÒÏÇÒÁ×ÁÞ¦ mp3 ÔÁ midi, ͦËÛÅÒÉ, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "ëÎÉÖËÉ  ÔÁ HOWTO ÐÒÏ ì¦ÎÁËÓ ÔÁ צÌØÎÅ ÐÒÏÇÒÁÍÎÅ ÚÁÂÅÚÐÅÞÅÎÎÑ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "òÏÂÏÞÁ ÓÔÁÎÃ¦Ñ KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - צÄÅÏ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "îÁÂ¦Ò ÚÁÓÏÂ¦× ÄÌÑ ÐÏÛÔÉ, ÎÏ×ÉÎ, ÔÅÎÅÔ, ÐÅÒÅÄÁÞ¦ ÆÁÊ̦×, ÔÁ \"ÂÁÌÁÞÏË\""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "âÁÚÁ ÄÁÎÉÈ"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "óÅÒ×ÅÒÉ ÂÁÚ ÄÁÎÉÈ PostgreSQL ÁÂÏ MySQL "
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "úÁÓÏÂÉ ÄÌÑ ÐÏÌÅÇÛÅÎÎÑ ËÏÎƦ­ÕÒÕ×ÁÎÎÑ ×ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - Ú×ÕË"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "õԦ̦ÔÉ"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "äÏËÕÍÅÎÔÁæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "úÁÓÏÂÉ ÄÌÑ ËÏÎÓÏ̦"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "ðÏÛÔÏ×ÉÊ ÓÅÒ×ÅÒ postfix, ÓÅÒ×ÅÒ ÎÏ×ÉÎ inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "óÔÁÎÃ¦Ñ ÄÌÑ ¦ÎÔÅÒÎÅÔÕ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "íÕÌØÔÉÍÅĦÊÎÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "ëÏÎƦ­ÕÒÁæÑ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "äÏÄÁÔËÏצ ÇÒÁƦÞΦ ÓÅÒÅÄÏ×ÉÝÁ (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"òÏÂÏÞÅ ÓÅÒÅÄÏ×ÉÝÅ K (KDE) - ÏÓÎÏ×ÎÅ ÇÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ Ú ÎÁÂÏÒÏÍ\n"
-"ÄÏÐÏͦÖÎÉÈ ÚÁÓϦ×"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "çÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "úÁÓÏÂÉ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÔÁ ÚÁÐÉÓÕ ËÏÍÐÁËÔ-ÄÉÓ˦×"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "ïƦÓÎÁ ÒÏÂÏÞÁ ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "óÅÒ×ÅÒ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "çÒÁƦÞΦ ÐÒÏÇÒÁÍÉ - ÔÁ˦ ÑË The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "â¦Â̦ÏÔÅËÉ ÄÌÑ ÐÒÏÇÒÁÍÕ×ÁÎÎÑ × C, C++ ÐÒÏÇÒÁÍÉ ÔÁ ÆÁÊÌÉ ÚÁÇÏÌÏ×˦×"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "íÅÒÅÖÅ×ÉÊ ËÏÍÐ'ÀÔÅÒ (ÓÅÒ×ÅÒ)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "ðÏÛÔÁ/ ÐÒÏÇÒÁÍÉ ÄÌÑ ÒÏÂÏÞÉÈ ÇÒÕÐ/ÎÏ×ÉÎÉ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "¶ÇÒÏ×Á ÓÔÁÎæÑ"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ðÒÏÇÒÁ×ÁÞ¦ צÄÅÏ ÔÁ צÄÅÏ-ÒÅÄÁËÔÏÒÉ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - ÇÒÁƦËÁ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ðÒÏÇÒÁÍÉ ÄÌÑ ÒÏÚ×ÁÇ: ¦ÇÒÉ-ÐÏÇÏΦ, ¦ÇÒÉ ÎÁ ÄÏÛæ, ÓÔÒÁÔÅǦÞΦ, ÔÏÝÏ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"îÁÂ¦Ò ÚÁÓÏÂ¦× ÄÌÑ ÐÒÏÞÉÔÁÎÎÑ ÔÁ ÐÅÒÅÄÁÞ¦ ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ ÔÁ ÇÒÕÐ\n"
-"ÎÏ×ÉÎ (pine, mutt, tin..) ÔÁ ÄÌÑ ÐÅÒÅÇÌÑÄÕ ¦ÎÆÏÒÍÁæÊÎÉÈ ÔÅÎÅÔ"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "áÒȦ×Õ×ÁÎÎÑ, ÅÍÕÌÑÔÏÒÉ, ÚÁÓÏÂÉ ÄÌÑ ÍÏΦÔÏÒÉέÕ"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "ðÅÒÓÏÎÁÌØΦ ƦÎÁÎÓÉ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"çÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ Ú ÄÒÕÖÎ¦Í ¦ÎÔÅÒÆÅÊÓÏÍ ÔÁ ÐÒÏÇÒÁÍÁÍÉ, ÚÁÓÏÂÉ ÄÌÑ\n"
-"ÒÏÂÏÞÏÇÏ ÓÔÏÌÁ"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ë̦¤ÎÔÉ ÄÌÑ Ò¦ÚÎÉÈ ÐÒÏÔÏËÏÌ¦× (ssh ×ËÌÀÞÎÏ)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "¶ÎÔÅÒÎÅÔ-ÛÌÀÚ"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ú×ÕËÏצ ÔÁ צÄÅÏ ÐÒÏÇÒ×ÁÞ¦ ÔÁ ÒÅÄÁËÔÏÒÉ"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "¶ÎÛ¦ ÒÏÂÏÞ¦ ÓÅÒÅÄÏ×ÉÝÁ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "òÅÄÁËÔÏÒÉ, ËÏÍÁÎÄΦ ÏÂÏÌÏÎËÉ, ÆÁÊÌÏצ ÚÁÓÏÂÉ ÔÁ ÔÅÒͦÎÁÌÉ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ðÒÏÇÒÁÍÉ ÄÌÑ ÐÅÒÓÏÎÁÌØÎÉÈ Æ¦ÎÁÎÓÏ×ÉÈ ÏÂÒÁÈÕÎË¦× (ÔÉÐÕ gnucash)"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "íÅÎÅÄÖÅÒ ÏÓÏÂÉÓÔϧ ¦ÎÆÏÒÍÁæ§"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "íÕÌØÔÉÍÅÄ¦Ñ - ÚÁÐÉÓ ËÏÍÐÁËÔ-ÄÉÓ˦×"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "îÁÕËÏ×Á ÒÏÂÏÞÁ ÓÔÁÎæÑ"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "÷¦ÄͦÎÉÔÉ"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "î¦ÞÏÇÏ"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ ÓÔÁÎÄÁÒÔÎÏÇÏ ËÏÒÉÓÔÕ×ÁÞÁ:"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "úÁÓÔÏÓÕ×ÁÔÉ/ÐÅÒÅÞÉÔÁÔÉ ÐÒÉÎÔÅÒÉ"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÎÁÄÁÔÉ ÊÏÇÏ ÏÐæ§ ÄÌÑ ÍÏÄÕÌÑ %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ÐÏÍÉÌËÁ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#~ msgid "Low"
-#~ msgstr "îÉÚØËÉÊ"
-
-#~ msgid "Medium"
-#~ msgstr "óÅÒÅÄΦÊ"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "ë¦ÌØËÁ ÐÏËÒÁÝÅÎØ ÎÁ ÃØÏÍÕ Ò¦×Φ ÚÁÈÉÓÔÕ. ïÓÎÏ×ÎÅ ÐÏËÒÁÝÅÎÎÑ - ¦ÌØÛÁ\n"
-#~ "˦ÌØ˦ÓÔØ ÐÏצÄÏÍÌÅÎØ ÐÒÏ ÐÏÒÕÛÅÎÎÑ ÂÅÚÐÅËÉ ÔÁ ¦ÌØÛÁ ˦ÌØ˦ÓÔØ\n"
-#~ "ÐÅÒÅצÒÏË."
-
-#~ msgid "Boot mode"
-#~ msgstr "òÅÖÉÍ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "åËÓÐÅÒÔ"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/ì¦ÎÁËÓ ÏÂÒÏÂÌѤ ÞÁÓ ×¦ÄÎÏÓÎÏ ÄÏ ÞÁÓÕ ÐÏ ½Ò¦ÎצÞÕ (GMT ÁÂÏ\n"
-#~ "\"Greenwich Mean Time\") ¦ ÐÅÒÅ×ÏÄÉÔØ ÊÏÇÏ × Í¦ÓÃÅ×ÉÊ ÞÁÓ Õ\n"
-#~ "צÄÐÏצÄÎÏÓÔ¦ ÄÏ ÞÁÓÏ×ÏÇÏ ÐÏÑÓÕ, × ÑËÏÍÕ ×É ÚÎÁÈÏÄÉÔÅÓØ."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "ú×'ÑÚÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "÷¦Ä'¤ÄÎÁÔÉÓÑ ×¦Ä ¦ÎÔÅÒÎÅÔÕ"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "îÁÓÔÒϧÔÉ Ú'¤ÄÎÁÎÎÑ ÍÅÒÅÖ¦ (ÌÏËÁÌØÎÁ ÍÅÒÅÖÁ ÁÂÏ ¦ÎÔÅÒÎÅÔ)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "îÁ ÑËÉÊ ÄÉÓË ×É ÈÏÞÅÔÅ ÐÅÒÅͦÓÔÉÔÉÓÑ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "÷ÉÂÅÒ¦ÔØ ÐÁËÅÔÉ, Ñ˦ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "¶ÎÆÏÒÍÁæÑ"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "òÏÂÏÞÁ ÓÔÁÎÃ¦Ñ Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "Á×ÔÅÎÔÉËÁæÑ"
-
-#~ msgid "user"
-#~ msgstr "ËÏÒÉÓÔÕ×ÁÞ"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "óËÁÎÕÀ ÄÏÓÔÕÐΦ ÒÅÓÕÒÓÉ NFS"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "óËÁÎÕÀ ÄÏÓÔÕÐΦ ÒÅÓÕÒÓÉ NFS ÎÁ ÓÅÒ×ÅÒ¦ %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "óËÁÎÕÀ ÄÏÓÔÕÐΦ ÒÅÓÕÒÓÉ Samba"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "óËÁÎÕÀ ÄÏÓÔÕÐΦ ÒÅÓÕÒÓÉ Samba ÎÁ ÓÅÒ×ÅÒ¦ %s"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "÷ÉȦÄ"
-
-#~ msgid "Removable media"
-#~ msgstr "úͦÎΦ ÎÏÓ¦§"
-
-#~ msgid "Active"
-#~ msgstr "áËÔÉ×ÎÁ"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "î¦"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "íÏÄÅÌØ \\\"%s\\\" ÐÒÉÎÔÅÒÁ ÚÎÁÊÄÅÎÁ ÎÁ "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "ìÏËÁÌØÎÉÊ ÐÒÉÓÔÒ¦Ê ÐÒÉÎÔÅÒÁ"
-
-#~ msgid "Printer Device"
-#~ msgstr "ðÒÉÓÔÒ¦Ê ÐÒÉÎÔÅÒÁ: "
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "ðÒÉÓÔÒ¦Ê/ÆÁÊÌ ÎÅ ÚÎÁÊÄÅÎÏ"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "ðÒÉÎÔÅÒ(É) ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦(ÁÈ) CUPS"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "ðÒÉÎÔÅÒ(É) ÎÁ צÄÄÁÌÅÎÏÍÕ ÓÅÒ×ÅÒ¦(ÁÈ) CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "ì¦ÎÁËÓ"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "óÉÓÔÅÍÎÉÊ ÒÅÖÉÍ"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "¶ÎÛ¦"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "ôÉÐ: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "ðÏÇÁÎÉÊ ÒÅÚÅÒ×ÎÉÊ ÆÁÊÌ"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "îÁÓÔÒϧÔÉ X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "ðÒÉÓÔÒ¦Ê ÐÒÉÎÔÅÒÁ: "
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "÷¦ÄͦÎÉÔÉ"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "çÁÒÁÚÄ"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "úÁËÒÉÔÉ"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "ðÏÞÉÎÁÀ Ú'¤ÄÎÁÎÎÑ..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "úÁËÒÉ×ÁÀ Ú'¤ÄÎÁÎÎÑ..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "ú'¤ÄÎÁÎÎÑ ÎÅ ÚÁËÒÉÔÅ.  \n"
-#~ "\n"
-#~ "óÐÒÏÂÕÊÔÅ ÚÒÏÂÉÔÉ ÃÅ ×ÒÕÞÎÕ ×ÉËÏÎÁ×ÛÉ ÓËÒÉÐÔ\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down ÑË \n"
-#~ "ÁÄͦΦÓÔÒÁÔÏÒ (root)"
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "óÉÓÔÅÍÁ צÄ'¤ÄÎÁÎÁ"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚͦÒ, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#~ msgid "Total size: "
-#~ msgstr "úÁÇÁÌØÎÉÊ ÒÏÚͦÒ: "
-
-#~ msgid "Please wait, "
-#~ msgstr "úÁÞÅËÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, "
-
-#~ msgid "Total time "
-#~ msgstr "úÁÇÁÌØÎÉÊ ÞÁÓ "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ×ÖÅ ¦ÓÎÕÀÞÕ ËÏÎƦÇÕÒÁæÀ ÄÌÑ X?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "äÏ ÑËÏÇÏ ÐÒÉÓÔÒÏÀ ЦÄ'¤ÄÎÁÎÉÊ ÷ÁÛ ÐÒÉÎÔÅÒ (צÄÚÎÁÞÔÅ,\n"
-#~ "ÝÏ /dev/lp0 ÔÅÖ ÓÁÍÅ, ÝÏ ¦ LPT1:)?\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "õ×ÁÇÁ: ÐÌÁÔÕ ÍÅÒÅÖ¦ ×ÖÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ.\n"
-#~ "ëÏÎƦ­ÕÒÁæÀ ÂÕÄÅ ÚͦÎÅÎÏ"
-
-#~ msgid "New"
-#~ msgstr "îÏ×ÉÊ"
-
-#~ msgid "Remote"
-#~ msgstr "÷¦ÄÄÁÌÅÎÉÊ"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "ëÌÁÃΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÎÁ ЦÄÒÏÚĦ̦"
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr ""
-#~ "ñËÝÏ × ÎÁ×ÅÄÅÎÏÍÕ ×ÉÝÅ ÓÐÉÓËÕ ÎÅÍÁ¤ ÐÏÔÒ¦ÂÎÏÇÏ ÐÕÎËÔÕ, ××ÅĦÔØ ÊÏÇÏ ÔÕÔ:"
-
-#~ msgid "Shared resource"
-#~ msgstr "òÅÓÕÒÓÉ ÄÌÑ ÓЦÌØÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "îÅÏÄÎÏÚÎÁÞΦÓÔØ (%s). ÷ËÁÖ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÔÏÞΦÛÅ\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "÷ÁÛ ×ɦÒ? (ÒÅËÏÍÅÎÄÏ×ÁÎÉÊ %s, ××ÅĦÔØ `none' ÄÌÑ Î¦ÑËÏÇÏ) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ÎÅ ÍÏÖÕ ×¦ÄËÒÉÔÉ /etc/sysconfig/autologin ÎÁ ÐÒÏÞÉÔÁÎÎÑ: %s\""
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "þÉ ÷É ÈÏÞÅÔÅ ÐÅÒÅÚÁÐÕÓÔÉÔÉ ÍÅÒÅÖÕ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "÷É ÐÏÇÏÄÖÕ¤ÔÅÓØ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "úÁÒÁÚ ÂÕÄÅ ÐÅÒÅÚÁÐÕÝÅÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "úÁÒÁÚ ÂÕÄÅ ÐÅÒÅÚÁÐÕÝÅÎÉÊ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦ %s. ÷É ÐÏÇÏÄÖÕ¤ÔÅÓØ?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "ñËÝÏ ÎÅ ×ËÁÚÁÎÏ ¦ÎÁËÛÅ, ÔÏ ÎÁÊÞÁÓÔ¦ÛÉÊ ×ÉÂ¦Ò - ÃÅ \"/dev/hda\" (ÐÅÒÛÉÊ\n"
-#~ "ÄÉÓË ÎÁ ÐÅÒÛÏÍÕ IDE ËÁÎÁ̦) ÁÂÏ \"/dev/sda\" (ÐÅÒÛÉÊ ÄÉÓË SCSI)."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "òÏÚÒÉ× Ú×'ÑÚËÕ ÐÒÉ ÎÅÁËÔÉ×ÎÏÓÔ¦ (ÓÅË) [beta, ÝÅ ÎÅ ×ÐÒÏ×ÁÄÖÅÎÏ]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "äÉÓÔÒÉÂÕÔÉ× íÁÎÄÒÅÊË ì¦ÎÁËÓ ÒÏÚͦÝÅÎÉÊ ÎÁ ˦ÌØËÏÈ\n"
-#~ "ËÏÍÐÁËÔ-ÄÉÓËÁÈ. íÏÖÌÉ×Ï, drakX ×ÉÂÒÁ× ÐÁËÅÔÉ, ÝÏ ÚÎÁÈÏÄÑÔØÓÑ ÎÁ ¦ÎÛÉÈ\n"
-#~ "ÄÉÓËÁÈ (צÄͦÎÎÉÈ ×¦Ä ÕÓÔÁÎÏ×ÏÞÎÏÇÏ). ëÏÌÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÂÕÄÅ ÐÏÔÒ¦ÂÅÎ\n"
-#~ "¦ÎÛÉÊ ÄÉÓË, ÐÒÏÇÒÁÍÁ ×ÉÔÑÇÎÅ ÄÁÎÉÊ ËÏÍÐÁËÔ-ÄÉÓË ¦ ÐÏÐÒÏÓÉÔØ ×ÓÔÁ×ÉÔÉ\n"
-#~ "ÐÏÔÒ¦ÂÎÉÊ."
-
-#~ msgid ""
-#~ "drakX just skips this test unless you purposely click on the "
-#~ "corresponding step\n"
-#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
-#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
-#~ "\n"
-#~ "Perhaps this is not what you want. In that case, you just have to select "
-#~ "the\n"
-#~ "right type for your mouse in the list which appears.\n"
-#~ "\n"
-#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
-#~ "are\n"
-#~ "good. If not, you can click on \"Cancel\" to choose another driver."
-#~ msgstr ""
-#~ "drakX ÐÒÏÓÔÏ ÐÒÏÐÕÓËÁ¤ ÃÅÊ ÔÅÓÔ, ÑËÝÏ ÷É Ñ×ÎÏ ÎÅ ×ËÁÖÅÔÅ ÎÁ ÃÅÊ ËÒÏË,\n"
-#~ "×ÉÂÒÁ×ÛÉ ÊÏÇÏ ÍÉÛËÏÀ Õ ÓÐÉÓËÕ Ì¦×ÏÒÕÞ. ÷ ÓÔÁÎÄÁÒÔÎ¦Ê ËÏÎƦ­ÕÒÁæ§,\n"
-#~ "drakX ÂÁÞÉÔØ ÍÉÛËÕ ÑË Ä×ÏÈ-ËÌÁצÛÎÕ, ¦ ÐÒÏÇÒÁÍÎÏ ÅÍÕÌÀ¤ ÔÒÅÔÀ\n"
-#~ "ËÌÁצÛÕ. ÷¦Î ÔÁËÏÖ ÚÎÁ¤, ÞÉ ÍÉÛËÁ PS/2, ÐÏÓ̦ÄÏ×ÎÁ ÞÉ USB.\n"
-#~ "\n"
-#~ "íÏÖÌÉ×Ï, ÃÅ ÎÅ ÔÅ, ÝÏ ÐÏÔÒ¦ÂÎÏ ÷ÁÍ. ÷ ÔÁËÏÍÕ ÒÁÚ¦ ÷ÁÍ ÐÒÏÓÔÏ ÐÏÔÒ¦ÂÎÏ\n"
-#~ "×ÉÂÒÁÔÉ ×¦ÒÎÉÊ ÔÉÐ Ó×Ϥ§ ÍÉÛËÉ × ÓÐÉÓËÕ, ÑËÉÊ Ú'Ñ×ÉÔØÓÑ.\n"
-#~ "\n"
-#~ "ð¦ÓÌÑ ÃØÏÇÏ ÍÏÖÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÍÉÛËÕ. óËÏÒÉÓÔÁÊÔÅÓØ ËÎÏÐËÁÍÉ ÞÉ\n"
-#~ "ËÏ̦ÝÁÔËÏÍ, ÝÏ ÐÅÒÅצÒÉÔÉ, ÞÉ ×Ó¦ ÕÓÔÁÎÏ×ËÉ ×¦ÒΦ. ñËÝÏ ÃÅ ÎÅ ÔÁË,\n"
-#~ "ÎÁÔÉÓΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\", ¦ ÓÐÒÏÂÕÊÔÅ ¦ÎÛÉÊ ÄÒÁÊ×ÅÒ."
-
-#~ msgid "Spooler: "
-#~ msgstr "ëÅÒÕ×ÁÎÎÑ ÞÅÒÇÏÀ:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "÷ÉÐÒÏÂÕÊÔÅ ÍÉÛËÕ ÔÕÔ"
-
-#~ msgid "Press next to continue."
-#~ msgstr "îÁÔÉÓΦÔØ ÄÁ̦ ÄÌÑ ÐÒÏÄÏ×ÖÅÎÎÑ"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ ÏÓÎÏ×ÎÕ ÍÏ×Õ, ÑËÕ ×É ÂÕÄÅÔÅ ×ÖÉ×ÁÔÉ ÐÒÉ ×ÓÔÁÎÏ×ÌÅÎΦ ÓÉÓÔÅÍÉ\n"
-#~ "ÔÁ ÐÒÉ ËÏÒÉÓÔÕ×ÁÎΦ ÓÉÓÔÅÍÏÀ"
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr "×ÓÔÁÎÏ×ÌÀ¤ÔÅ "
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ ×¦ÄÐÏצÄÎÕ ÒÏÚËÌÁÄËÕ ËÌÁצÁÔÕÒÉ ¦Ú ÓÐÉÓËÕ"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ, ÝÏÂ Õ ÷ÁÛ¦Ê ÓÉÓÔÅͦ ЦÓÌÑ ÕÓÔÁÎÏ×ËÉ ÂÕÌÉ ÐÒÉÓÕÔΦÍÉ\n"
-#~ "¦ÎÛ¦ ÍÏ×É (ËÒ¦Í Ôϧ, ÑËÕ ×É ×ÖÅ ×ÉÂÒÁÌÉ ÎÁ ÐÏÞÁÔËÕ ÕÓÔÁÎÏ×ËÉ),\n"
-#~ "×ÉÂÅÒ¦ÔØ §È, ÂÕÄØ-ÌÁÓËÁ, Ú ÐÏÄÁÎÏÇÏ ÓÐÉÓËÕ. ñËÝÏ ×É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ ×Ó¦\n"
-#~ "ÍÏ×É, ×É ÍÏÖÅÔÅ ÐÒÏÓÔÏ ×ÉÂÒÁÔÉ ÐÕÎËÔ \"÷Ó¦\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ:\n"
-#~ "\n"
-#~ "\n"
-#~ "  - óÐÅæÁÌØÎÉÊ: ñËÝÏ ×É ÚÎÁÊÏͦ Ú ì¦ÎÁËÓÏÍ, ×É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-#~ "    Ò¦×ÅÎØ ×ÉËÏÒÉÓÔÁÎÎÑ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÐÁËÅÔ¦× ÔÁ˦, ÑË Ú×ÉÞÁÊÎÉÊ, "
-#~ "ÒÏÚÒÏÂÎÉË\n"
-#~ "    ÔÁ ÓÅÒ×ÅÒ. ÷ÉÂÅÒ¦ÔØ \"ú×ÉÞÁÊÎÉÊ\", ÄÌÑ Ú×ÉÞÁÊÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ "
-#~ "ÓÉÓÔÅÍÉ,\n"
-#~ "    ÑË ÐÅÒÓÏÎÁÌØÎÉÍ ËÏÍÐ'ÀÔÅÒÏÍ. ñËÝÏ ×É ÂÕÄÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÓÉÓÔÅÍÕ "
-#~ "×\n"
-#~ "    ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÒÏÚÒÏÂËÉ, ×ÉÂÅÒ¦ÔØ \"òÏÚÒÏÂÎÉË\". áÂÏ ×ÉÂÅÒ¦ÔØ \"óÅÒ×ÅÒ"
-#~ "\",\n"
-#~ "    ÑËÝÏ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÅÒ×ÅÒ ÚÁÇÁÌØÎÏÇÏ ÐÒÉÚÎÁÞÅÎÎÑ (ÄÌÑ\n"
-#~ "    ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ, ÐÒÉÎÔ-ÓÅÒ×ÅÒ...).\n"
-#~ "\n"
-#~ "  - åËÓÐÅÒÔ: ñËÝÏ ×É ×¦ÌØÎÏ ÐÏÞÕ×Á¤ÔÅ × ÓÅÒÅÄÏ×Éݦ GNU/Linux ¦ ÈÏÞÅÔÅ\n"
-#~ "    ×ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ, ÔÁË ÑË ÷ÁÍ ÈÏÞÅÔØÓÑ - ÃÅÊ ÓÐÏӦ ÕÓÔÎÏ×ËÉ ÄÌÑ\n"
-#~ "    ÷ÁÓ. ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÏÐæÀ ×ÉËÏÒÉÓÔÁÎÎÑ ÷ÁÛϧ ÓÉÓÔÅÍÉ, ÑË\n"
-#~ "    \"óÐÅæÁÌØÎÅ\"\n"
-#~ "\n"
-#~ "    áÌÅ, ØÕÄØ-ÌÁÓËÁ, îå ÷éâéòáêôå ïóôáîî¶ê òåöéí, ëò¶í ôïçï ÷éðáäëõ,\n"
-#~ "    ñëýï ÷é óðòá÷ä¶ òïúõí¶´ôåóø îá ôïíõ, ýï ÷é òïâéôå.  "
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "ò¦ÚΦ ×ÁÒ¦ÁÎÔÉ ÄÌÑ ËÏÒÉÓÔÕ×ÁÎÎÑ ÷ÁÛÏÀ ÓÉÓÔÅÍÏÀ (ÑËÝÏ ×É ×ÉÂÒÁÌÉ ËÌÁÓ\n"
-#~ "ÕÓÔÁÎÏ×ËÉ \"óÐÅæÁÌØÎÉÊ\" ÁÂÏ \"åËÓÐÅÒÔ\") ÔÁ˦:\n"
-#~ "\n"
-#~ "  - òÏÂÏÞÁ ÓÔÁÎæÑ: ×ÉÂÅÒ¦ÔØ ÃÅ, ÑËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÷ÁÛÕ\n"
-#~ "    ÍÁÛÉÎÕ × ÏÓÔÎÏ×ÎÏÍÕ ÄÌÑ ÝÏÄÅÎÎϧ ÒÏÂÏÔÉ (ÏƦÓÎÁ ÒÏÂÏÔÁ, ÏÂÒÏÂËÁ\n"
-#~ "    ÇÒÁƦËÉ ÔÏÝÏ). îÅ ÞÅËÁÊÔÅ, ÝÏ ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ Ñ˦-ÎÅÂÕÄØ\n"
-#~ "    ËÏÍЦÌÑÔÏÒÉ, ÐÒÏÇÒÁÍÉ ÒÏÚÒÏÂËÉ, ÔÏÝÏ.\n"
-#~ "\n"
-#~ "  - òÏÚÒÏÂËÁ: ÓÁÍÁ ÎÁÚ×Á ËÁÖÅ ÚÁ ÓÅÂÅ. ÷ÉÂÅÒ¦ÔØ ÃÅÊ ×ÁÒ¦ÁÎÔ, ÑËÝÏ ÷É\n"
-#~ "    ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ó×ÏÀ ÍÁÛÉÎÕ × ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÒÏÚÒÏÂËÉ\n"
-#~ "    ÐÒÏÇÒÁÍÎÏÇÏ ÚÁÂÅÚÐÅÞÅÎÎÑ. ÷ ÃØÏÍÕ ×ÉÐÁÄËÕ ×É ÏÔÒÉÍÁ¤ÔÅ ÐÏ×ÎÉÊ "
-#~ "ËÏÍÐÌÅËÔ\n"
-#~ "    ÐÒÏÇÒÁÍ ÄÌÑ ËÏÍЦÌÑæ§, צÄÌÁÄËÉ ÔÁ ÆÏÒÍÁÔÕ×ÁÎÎÑ ×ÉȦÄÎÉÈ ÔÅËÓÔ¦×, "
-#~ "ÔÁ\n"
-#~ "    ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÐÒÏÇÒÁÍÎÉÈ ÐÁËÅÔ¦×.  \n"
-#~ "\n"
-#~ "  - óÅÒ×ÅÒ: ñËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÍÁÛÉÎÕ, ÎÁ ÑË¦Ê ÷É\n"
-#~ "    ×ÓÔÁÎÏ×ÌÀ¤ÔÅ Mandrake ì¦ÎÁËÓ, ÑË ÓÅÒ×ÅÒ. áÂÏ ÑË ÆÁÊÌ ÓÅÒ×ÅÒ (NFS ÁÂÏ\n"
-#~ "    SMB), ÓÅÒ×ÅÒ ÐÒÉÎÔÅÒÁ (ÔÉÐÕ àΦËÓ lp ÁÂÏ ÔÉÐÕ Windows SMB ÐÒÉÎÔÅÒÁ),\n"
-#~ "    ÑË ÓÅÒ×ÅÒ ÁÕÔÅÎÔÉËÁæ§ (NIS), ÓÅÒ×ÅÒ ÂÁÚÉ ÄÁÎÉÈ, ÔÏÝÏ. ïÔÖÅ, ÎÅ\n"
-#~ "    ÞÅËÁÊÔÅ, ÝÏ Ñ˦ÓØ ÐÒÉÍÏÞËÉ (ÔÉÐÕ KDE, GNOME...) ÂÕÄÕÔØ ×ÓÔÁÎÏ×ÌÅΦ."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÇÒÕÐÕ ÐÁËÅÔ¦×, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÞÉ\n"
-#~ "ÐÏÎÏ×ÉÔÉ.\n"
-#~ "\n"
-#~ "DrakX ÐÏÔ¦Í ÐÅÒÅצÒÉÔØ, ÞÉ ÄÏÓÔÁÔÎØÏ ×¦ÌØÎÏÇÏ Í¦ÓÃÑ ÎÁ ÷ÁÛÏÍÕ\n"
-#~ "ËÏÍÐ'ÀÔÅÒ¦ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÃÉÈ ÐÁËÅÔ¦×. ñËÝÏ Í¦ÓÃÑ ÎÅÄÏÓÔÁÔÎØÏ, צÎ\n"
-#~ "ÐÏÐÅÒÅÄÉÔØ ÷ÁÓ ÐÒÏ ÃÅ. ñËÝÏ ×É ×ÓÅ-ÔÁËÉ ÈÏÞÅÔÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉ, צΠÐÏÞÎÅ\n"
-#~ "ÕÓÔÁÎÏ×ËÕ ×ÉÂÒÁÎÉÈ ÇÒÕÐ ÐÁËÅÔ¦×, ÁÌÅ ÐÒÏÐÕÓÔÉÔØ ÄÅÑ˦ ÍÅÎÛ ×ÁÖÌÉצ\n"
-#~ "ÐÁËÅÔÉ. ÷ÎÉÚÕ ÓÐÉÓËÕ ×É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÏÐæÀ \"¶ÎÄÉצÄÕÁÌØÎÉÊ ×ɦÒ\n"
-#~ "ÐÁËÅÔ¦×\". ÷ ÃØÏÍÕ ×ÉÐÁÄËÕ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ÐÅÒÅÇÌÑÄÁÔÉ ÓÐÉÓÏË ¦Ú\n"
-#~ "¦ÌØÛ, Î¦Ö 1000 ÐÁËÅÔ¦×..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "úÁÒÁÚ ×É ¦ÎÄÉצÄÕÁÌØÎÏ ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÐÁËÅÔÉ, Ñ˦ ×É ÂÁÖÁÌÉ Â\n"
-#~ "×ÓÔÁÎÏ×ÉÔÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷É ÍÏÖÅÔÅ ÒÏÚÇÏÒÎÕÔÉ ÞÉ ÚÇÏÒÎÕÔÉ ÄÅÒÅ×Ï ÐÁËÅÔ¦×, ÑËÝÏ ËÌÁÃÎÅÔÅ ÎÁ\n"
-#~ "ÐÁÒÁÍÅÔÒÁÈ × Ì¦×ÏÍÕ ËÕÔËÕ ×¦ËÎÁ Ú ÐÁËÅÔÁÍÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÈÏÞÅÔŠצÄÓÏÒÔÕ×ÁÔÉ ÐÁËÅÔÉ × ÁÌÆÁצÔÎÏÍÕ ÐÏÒÑÄËÕ, ËÌÁÃΦÔØ ÎÁ\n"
-#~ "ЦËÔÏÇÒÁÍæ \"ðÅÒÅÍÉËÎÕÔÉ ÓÏÒÔÕ×ÁÎÎÑ ÐÏ ÇÒÕÐÁÍ/ÂÅÚ ÇÒÕÐ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ ÐÏÚÂÕÔÉÓÑ ÐÏÐÅÒÅÄÖÅÎØ ÐÒÏ ÎÅ×ÉËÏÎÁÎÎÑ ×ÚÁ¤ÍÏÚÁÌÅÖÎÏÓÔÅÊ\n"
-#~ "ÐÁËÅÔ¦×, ËÌÁÃΦÔØ ÎÁ \"á×ÔÏÍÁÔÉÞΦ ÚÁÌÅÖÎÏÓÔ¦\". úÁÕ×ÁÖÔÅ ÏÄÎÁË, ÝÏ ËÏÌÉ\n"
-#~ "×É ×ÉÂÅÒÅÔÅ ÃÅÊ ÒÅÖÉÍ, ÐÒÉ ×¦ÄͦΦ ×ÉÂÏÒÕ ÑËÏÇÏÓØ ÐÁËÅÔÕ ÍÏ×ÞËÉ ÍÏÖÅ\n"
-#~ "ÚÎÑÔÉÓÑ ×¦ÄͦÎÁ ÔÁËÏÖ ¦Ú ÐÁËÅÔ¦×, ×¦Ä ÑËÉÈ ×¦Î ÚÁÌÅÖÉÔØ."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÍÁ¤ÔÅ ×Ó¦ ËÏÍÐÁËÔ-ÄÉÓËÉ Ú ÐÏÄÁÎÉÈ ×ÉÝÅ, ÎÁÔÉÓΦÔØ ÎÁ \"çÁÒÁÚÄ\".\n"
-#~ "ñËÝÏ ×É ÎÅ ÍÁ¤ÔÅ ÖÏÄÎÏÇÏ, ÎÁÔÉÓΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\".  ñËÝÏ Ô¦ÌØËÉ\n"
-#~ "ÄÅÑËÉÈ ËÏÍÐÁËÔ-ÄÉÓË¦× ÎÅ ×ÉÓÔÁÞÁ¤, צÄͦΦÔØ §È ×ɦÒ, ¦ ÎÁÔÉÓΦÔØ\n"
-#~ "\"çÁÒÁÚÄ\" ЦÓÌÑ ÃØÏÇÏ."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÈÏÞÅÔŠЦÄËÌÀÞÉÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒÁ ÄÏ ¶ÎÔÅÒÎÅÔÕ ÁÂÏ ÄÏ\n"
-#~ "ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦, ×ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, צÄÐÏצÄÎÕ ÕÓÔÁÎÏ×ËÕ. ðÅÒÛ,\n"
-#~ "Î¦Ö ×ÉÂÉÒÁÔÉ ÔÕ ÞÉ ¦ÎÛÕ ÕÓÔÁÎÏ×ËÕ, ×צÍËΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÓÁÍ ÐÒÉÓÔÒ¦Ê\n"
-#~ "ÄÌÑ ÔÏÇÏ, ÝÏ DrakX Í¦Ç ×ÉÚÎÁÞÉÔÉ ÊÏÇÏ Á×ÔÏÍÁÔÉÞÎÏ.\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÎÅ ÍÁ¤ÔŠΦ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ, Φ Ú ÌÏËÁÌØÎÏÀ ÍÅÒÅÖÅÀ, "
-#~ "×ÉÂÒÅÒ¦ÔØ ÕÓÔÁÎÏ×ËÕ \"úÁÂÏÒÏÎÉÔÉ ÍÅÒÅÖÕ\".\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÚÁÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ËÏÎƦ­ÕÒÁæÀ ÍÅÒÅÖ¦ ЦÚΦÛŠЦÓÌÑ ÔÏÇÏ, ÑË\n"
-#~ "ÕÓÔÁÎÏ×ËÁ ÓÉÓÔÅÍÉ ÚÁ˦ÎÞÅÎÁ, ÁÂÏ ÑËÝÏ ×É ×ÖÅ ÚÁ˦ÎÞÉÌÉ ËÏÎƦ­ÕÒÁæÀ\n"
-#~ "ÍÅÒÅÖ¦, ÎÁÔÉÓΦÔØ \"úÁ˦ÎÞÅÎÏ\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "îÅ ÚÎÁÊÄÅÎÏ ÍÏÄÅÍÁ. ÷ËÁÖ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÐÏÓ̦ÄÏ×ÎÉÊ ÐÏÒÔ, ÄÏ ÑËÏÇÏ\n"
-#~ "ÊÏÇÏ Ð¦ÄËÌÀÞÅÎÏ. \n"
-#~ "\n"
-#~ "äÌÑ ÄÏצÄËÉ: ÐÅÒÛÉÊ ÐÏÓ̦ÄÏ×ÎÉÊ ÐÏÒÔ (ÑËÉÊ Ú×ÅÔØÓÑ \"COM1\" × ÓÉÓÔÅͦ\n"
-#~ "Microsoft Windows) ÍÁ¤ ÎÁÚ×Õ \"ttyS0\" × ì¦ÎÁËÓ¦."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "÷É ÍÏÖÅÔÅ ÔÅÐÅÒ ××ÅÓÔÉ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÄÏÚ×ÏÎÕ ÄÏ ¶ÎÔÅÒÎÅÔ\n"
-#~ "ÐÒÏ×ÁÊÄÅÒÁ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ, ÞÉ ÎÅ ÐÅ×Φ × ÔÏÍÕ, Ñ˦ ÓÁÍÅ ÐÁÒÁÍÅÔÒÉ\n"
-#~ "ÔÒÅÂÁ ××ÏÄÉÔÉ, ×É ÚÍÏÖÅÔÅ ÏÔÒÉÍÁÔÉ §È ×¦Ä ÐÒÏ×ÁÊÄÅÒÁ. ñËÝÏ ×É ÎÅ\n"
-#~ "××ÅÄÅÔÅ ÔÕÔ ÎÁÚ×Õ ÓÅÒ×ÅÒÁ DNS (ÓÅÒ×ÅÒÁ ¦ÍÅÎ), ÊÏÇÏ ÎÁÚ×Á ÍÏÖÅ ÂÕÔÉ\n"
-#~ "ÏÔÒÉÍÁÎÁ ×¦Ä ÓÁÍÏÇÏ ÓÅÒ×ÅÒÁ Ð¦Ä ÞÁÓ Ð¦ÄËÌÀÞÅÎÎÑ ÄÏ ¶ÎÔÅÒÎÅÔÕ."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÍÁ¤ÔÅ ÚÏ×ΦÛÎ¦Ê ÍÏÄÅÍ, ×ÍÉËΦÔØ ÊÏÇÏ ÚÁÒÁÚ, ÂÕÄØ-ÌÁÓËÁ, ÄÌÑ\n"
-#~ "ÔÏÇÏ ÝÏ DrakX Í¦Ç ÒÏÚЦÚÎÁÔÉ ÊÏÇÏ Á×ÔÏÍÁÔÉÞÎÏ."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "÷ÍÉËΦÔØ, ÂÕÄØ-ÌÁÓËÁ, Ó×¦Ê ÍÏÄÅÍ ÔÁ ×ÉÂÅÒ¦ÔØ ÊÏÇÏ ÔÉÐ."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÎÅ ×ÐÅ×ÎÅΦ, ÝÏ ¦ÎÆÏÒÍÁÃ¦Ñ ÐÏÄÁÎÁ ×ÉÝÅ ËÏÒÅËÔÎÁ, ÁÂÏ ×É ÎÅ\n"
-#~ "×ÐÅ×ÎÅΦ, ÝÏ ÓÁÍÅ ÔÒÅÂÁ ××ÏÄÉÔÉ ÔÕÔ, ×É ÚÍÏÖÅÔÅ ÏÔÒÉÍÁÔÉ ÐÏÔÒ¦ÂÎÕ\n"
-#~ "¦ÎÆÏÒÍÁæÀ ×¦Ä Ó×ÏÇÏ ÐÒÏ×ÁÊÄÅÒÁ ¶ÎÔÅÒÎÅÔ-ÐÏÓÌÕÇ. ñËÝÏ ×É ÎÅ ××ÅÄÅÔÅ\n"
-#~ "ÔÕÔ ÎÁÚ×Õ ÓÅÒ×ÅÒÁ DNS (ÓÅÒ×ÅÒÁ ¦ÍÅÎ), ÊÏÇÏ ÎÁÚ×Á ÍÏÖÅ ÂÕÔÉ ÏÔÒÉÍÁÎÁ\n"
-#~ "×¦Ä ÓÁÍÏÇÏ ÓÅÒ×ÅÒÁ Ð¦Ä ÞÁÓ Ð¦ÄËÌÀÞÅÎÎÑ ÄÏ ¶ÎÔÅÒÎÅÔÕ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ××ÅÓÔÉ ÎÁÚ×Õ ÈÏÓÔÁ, ÑËÝÏ ÐÏÔÒ¦ÂÎÏ. ñËÝÏ ÷É\n"
-#~ "ÓÕÍΦ×Á¤ÔÅÓØ, ÝÏ ÔÕÔ ÔÒÅÂÁ ××ÏÄÉÔÉ, ÃÑ ¦ÎÆÏÒÍÁÃ¦Ñ ÍÏÖÅ ÂÕÔÉ ÏÔÒÉÍÁÎÁ\n"
-#~ "×¦Ä ×ÁÛÏÇÏ ¶ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÎÁÓÔÒÏϧÔÉ ÐÒÉÓÔÒ¦Ê ÍÅÒÅÖ¦.\n"
-#~ "\n"
-#~ "  * IP-ÁÄÒÅÓÁ: ÑËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ ÑËÁ ×ÏÎÁ, ÚÁÐÉÔÁÊÔÅ Õ ÷ÁÛÏÇÏ\n"
-#~ "ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦ ÁÂÏ ¦ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ. ÷É ÎÅ ÐÏ×ÉÎΦ ××ÏÄÉÔÉ\n"
-#~ "IP-ÁÄÒÅÓÕ, ÑËÝÏ ×É ×ÉÂÅÒÅÔÅ ÐÁÒÁÍÅÔÒ \"á×ÔÏÍÁÔÉÞÎÉÊ ×ÉÂ¦Ò IP\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  * íÁÓËÁ ÍÅÒÅÖ¦: × ÚÁÇÁÌØÎÏÍÕ ×ÉÐÁÄËÕ \"255.255.255.0\" ¤ ÎÅÐÏÇÁÎÉÍ\n"
-#~ "×ÉÂÏÒÏÍ. ñËÝÏ ×É ÓÕÍΦ×Á¤ÔÅÓØ, ÓÐÉÔÁÊÔÅ Õ ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦ ÁÂÏ\n"
-#~ "¦ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * á×ÔÏÍÁÔÉÞÎÉÊ ×ÉÂ¦Ò IP: ÷ÉÂÅÒ¦ÔØ ÃÅÊ ÐÕÎËÔ, ÑËÝÏ ÷ÁÛÁ ÍÅÒÅÖÁ\n"
-#~ "×ÉËÏÒÉÓÔÏ×Õ¤ ÐÒÏÔÏËÏÌ DHCP ÁÂÏ BOOTP. ñËÝÏ ÃÅÊ ÐÕÎËÔ ×ÉÂÒÁÎÏ, ÷ÁÍ ÎÅ\n"
-#~ "ÐÏÔÒ¦ÂÎÏ ÚÁÐÉÓÕ×ÁÔÉ Î¦ÞÏÇÏ × ÐÏ̦ \"IP ÁÄÒÅÓÁ\". ñËÝÏ ×É ÓÕÍΦ×Á¤ÔÅÓØ,\n"
-#~ "ÓÐÉÔÁÊÔÅ Õ ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "ñËÝÏ ÐÏÔÒ¦ÂÎÏ ×É ÍÏÖÅÔÅ ××ÅÓÔÉ ÔÕÔ ÎÁÚ×Õ ÓÉÓÔÅÍÉ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ,\n"
-#~ "ÓÐÉÔÁÊÔÅ Õ Ó×ÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "ôÕÔ ×É ÍÏÖÅÔÅ ××ÅÓÔÉ ÎÁÚ×Õ ÈÏÓÔÁ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ, ÞÉ ÎÅ ×ÐÅ×ÎÅΦ,\n"
-#~ "ÝÏ ÔÕÔ ÔÒÅÂÁ ××ÏÄÉÔÉ, ÚÁÌÉÛÔÅ ÃÅ ÐÏÌÅ ÐÕÓÔÉÍ. "
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ××ÅÓÔÉ ÐÁÒÁÍÅÔÒÉ ÄÌÑ Ú'¤ÄÎÁÎÎÑ ÐÏ ÍÏÄÅÍÕ. ñËÝÏ ÷É\n"
-#~ "ÓÕÍΦ×Á¤ÔÅÓØ, ÝÏ ÔÕÔ ÔÒÅÂÁ ××ÏÄÉÔÉ, ÃÑ ¦ÎÆÏÒÍÁÃ¦Ñ ÍÏÖÅ ÂÕÔÉ ÏÔÒÉÍÁÎÁ\n"
-#~ "×¦Ä ×ÁÛÏÇÏ ¶ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÒÏËÓ¦, ÂÕÄØ-ÌÁÓËÁ, ÓËÏÎƦ­ÕÒÕÊÔÅ §È\n"
-#~ "ÔÕÔ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ, ÞÉ ×É ÂÕÄÅÔÅ ÎÉÍÉ ËÏÒÉÓÔÕ×ÁÔÉÓÑ, ĦÚÎÁÊÔÅÓÑ\n"
-#~ "ÐÒÏ ÃÅ Õ ÷ÁÛÏÇÏ ÁÄӦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦, ÁÂÏ Õ ¶ÎÔÅÒÎÅÔ-ÐÒÏ×ÁÊÄÅÒÁ."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "ñËÝÏ ÷ÁÛÅ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ ×ÓÔÁÎÏ×ÌÅÎÏ ËÏÒÅËÔÎÏ, ×É ÍÏÖÅÔÅ\n"
-#~ "×ÓÔÁÎÏ×ÉÔÉ ÐÁËÅÔ ÄÌÑ ËÒÉÐÔÏÇÒÁƦ§. óÐÏÞÁÔËÕ ×ÉÂÅÒ¦ÔØ ÓÅÒ×ÅÒ\n"
-#~ "(ÄÚÅÒËÁÌÏ), Ú ÑËÏÇÏ ×É ÈÏÞÅÔÅ Ú×ÁÎÔÁÖÉÔÉ ÐÁËÅÔÉ, Á ÐÏÔ¦Í ×ÉÂÅÒ¦ÔØ\n"
-#~ "ÐÁËÅÔÉ, Ñ˦ ×É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ.\n"
-#~ "\n"
-#~ "úÁ××ÁÖÔÅ, ÝÏ ×É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ÓÅÒ×ÅÒÉ ÔÁ ÐÁËÅÔÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ×\n"
-#~ "ÚÁÌÅÖÎÏÓÔ¦ ×¦Ä ÚÁËÏÎÏÄÁ×ÓÔ×Á ÷ÁÛϧ ËÒÁ§ÎÉ."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "÷¦ÄÐÏצÄÎÏ ÄÏ Í¦ÓÃÑ ÄÅ ×É ÖÉ×ÅÔÅ, ×É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÞÁÓÏ×ÉÊ ÐÏÑÓ."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "÷É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÌÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ (ÑËÉÊ ÂÅÚÐÏÓÅÒÅÄÎØÏ Ú'¤ÄÎÁÎÉÊ Ú\n"
-#~ "÷ÁÛÉÍ ËÏÍÐ'ÀÔÅÒÏÍ) ÁÂÏ ×¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ (ÑËÉÊ ÄÏÓÔÕÐÎÉÊ ÞÅÒÅÚ ÍÅÒÅÖÕ\n"
-#~ "Unix, Netware ÞÉ Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÚÂÉÒÁ¤ÔÅÓØ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÒÉÎÔÅÒÁÍÉ Ú ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ, ÷É\n"
-#~ "ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÓÉÓÔÅÍÕ ÄÒÕËÕ Í¦Ö CUPS ÞÉ LPR.\n"
-#~ "\n"
-#~ "CUPS - ÃÅ ÎÏ×Á, ÐÏÔÕÖÎÁ ÔÁ ÇÎÕÞËÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ ÄÌÑ ÓÉÓÔÅÍ, ÝÏ\n"
-#~ "ÐÒÁÃÀÀÔØ Ú àΦËÓÏÍ (CUPS ÏÚÎÁÞÁ¤ óЦÌØÎÁ óÉÓÔÅÍÁ äÒÕËÕ ÄÌÑ àΦËÓÕ -\n"
-#~ "Common Unix Printing System). ãÅ - ÓÔÁÎÄÁÒÔÎÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ ÄÌÑ\n"
-#~ "íÁÎÄÒÅÊË ì¦ÎÁËÓÕ.\n"
-#~ "\n"
-#~ "LPR - ÃÅ ÓÔÁÒÁ ÓÉÓÔÅÍÁ ÄÒÕËÕ, ÑËÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÌÁÓÑ × ÐÏÐÅÒÅÄΦÈ\n"
-#~ "×ÅÒÓ¦ÑÈ íÁÎÄÒÅÊË ì¦ÎÁËÓÁ.\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÐÒÉÎÔÅÒ, ËÌÁÃΦÔØ ÎÁ \"î¦ÞÏÇÏ\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ÂÁÇÁÔØÍÁ ÔÉÐÁÍÉ ÐÒÉÎÔÅÒ¦×. ëÏÖÅÎ Ú ÃÉÈ\n"
-#~ "ÔÉÐ¦× ×ÉÍÁÇÁ¤ ÏËÒÅÍϧ ÕÓÔÁÎÏ×ËÉ.\n"
-#~ "\n"
-#~ "ñËÝÏ ÐÒÉÎÔÅÒ Æ¦ÚÉÞÎÏ Ð¦ÄËÌÀÞÅÎÉÊ ÄÏ ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ, ×ÉÂÅÒ¦ÔØ "
-#~ "\"ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦, ÑËÉÊ Ð¦Ä'¤ÄÎÁÎÉÊ ÞÅÒÅÚ ÍÅÒÅÖÕ ÄÏ\n"
-#~ "¦ÎÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ Ú ÓÉÓÔÅÍÏÀ àΦËÓ, ×ÉÂÅÒ¦ÔØ \"÷¦ÄÄÁÌÅÎÉÊ ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦, ÑËÉÊ Ð¦ÄËÌÀÞÅÎÉÊ ÄÏ ËÏÍÐ'ÀÔÅÒÁ Ú\n"
-#~ "ÓÉÓÔÅÍÏÀMicrosoft Windows (ÁÂÏ ÎÁ ÍÁÛÉΦ Ú àΦËÓÏÍ, ÑËÁ ËÏÒÉÓÔÕ¤ÔØÓÑ\n"
-#~ "ÐÒÏÔÏËÏÌÏÍ SMB), ×ÉÂÅÒ¦ÔØ \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "ðÅÒÛ, Î¦Ö ÐÒÏÄÏ×ÖÕ×ÁÔÉ ×ÍÉËΦÔØ, ÂÕÄØ-ÌÁÓËÁ, ÐÒÉÎÔÅÒ ÝÏ ÄÁÔÉ\n"
-#~ "ÍÏÖÌÉצÓÔØ DrakX צÒÎÏ ×ÉÚÎÁÞÉÔÉ ÊÏÇÏ ÔÉÐ.\n"
-#~ "\n"
-#~ "÷É ÍÁ¤ÔÅ ××ÅÓÔÉ ÄÅÑËÕ ¦ÎÆÏÒÍÁæÀ ÔÕÔ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * îÁÚ×Á ÐÒÉÎÔÅÒÁ: ÐÒÏÇÒÁÍÁ ÄÒÕËÕ ËÏÒÉÓÔÕ¤ÔØÓÑ ÎÁÚ×ÏÀ \"lp\", ËÏÌÉ ÎÅ\n"
-#~ "    ×ÓÔÁÎÏ×ÌÅΦ ¦ÎÛ¦ ÎÁÚ×É. ïÔÖÅ, ×É ÐÏ×ÉÎΦ ÍÁÔÉ ÐÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"lp\" "
-#~ "×\n"
-#~ "    Ó×Ï§Ê ÓÉÓÔÅͦ. ñËÝÏ ×É ÍÁ¤ÔÅ Ô¦ÌØËÉ ÏÄÉÎ ÐÒÉÎÔÅÒ, ×É ÍÏÖÅÔÅ ÍÁÔÉ\n"
-#~ "    ˦ÌØËÁ Ò¦ÚÎÉÈ ÎÁÚ× (ÐÓÅ×Ä) ÄÌÑ ÎØÏÇÏ. ¶ÍÅÎÁ Ô¦ÌØËÉ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-#~ "    ÒÏÚĦÌÉÔÉ Í¦Ö ÓÏÂÏÀ ÓÉÍ×ÏÌÏÍ ËÁÎÁÌÕ (\"|\"). ïÔÖÅ, ÑËÝÏ ×É ×¦ÄÄÁ¤ÔÅ\n"
-#~ "    ÐÅÒÅ×ÁÇÕ Ñ˦ÊÓØ Â¦ÌØÛ ÏÓÍÉÓÌÅÎ¦Ê ÎÁÚצ, ×É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ §§ ÐÅÒÛÏÀ,\n"
-#~ "    ÔÏÂÔÏ: \"í¦Ê ÐÒÉÎÔÅÒ|lp\".\n"
-#~ "\n"
-#~ "  * ïÐÉÓ: ÃÅ ÎÅÏÂÏ×'ÚËÏ×Å ÐÏÌÅ, ÁÌÅ ËÏÒÉÓÎÏ ÊÏÇÏ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ, ÑËÝÏ\n"
-#~ "    ×É ÍÁ¤ÔŠ˦ÌØËÁ ÐÒÉÎÔÅÒ¦× Ð¦Ä'¤ÄÎÁÎÉÈ ÄÏ ËÏÍÐ'ÀÔÅÒÁ, ÁÂÏ ÑËÝÏ ÷É\n"
-#~ "    ÈÏÞÅÔÅ ÄÏÚ×ÏÌÉÔÉ ÄÏÓÔÕÐ ¦ÎÛÉÍ ËÏÍÐ'ÀÔÅÒÁÍ ÄÏ ÃØÏÇÏ ÐÒÉÎÔÅÒÁ.\n"
-#~ "\n"
-#~ "  * òÏÚÔÁÛÕ×ÁÎÎÑ: ÑËÝÏ ×É ÈÏÞÅÔÅ ×ËÁÚÁÔÉ, ÄŠƦÚÉÞÎÏ ÚÎÁÈÏÄÉÔØÓÑ ÷ÁÛ\n"
-#~ "    ÐÒÉÎÔÅÒ, ÚÁÐÉÛ¦ÔØ ÃÅ ÔÕÔ (ÍÏÖÅÔÅ ÚÁÐÉÓÕ×ÁÔÉ ÔÕÔ, ÝÏ ÚÁ×ÇÏÄÎÏ Õ "
-#~ "צÌØΦÊ\n"
-#~ "    ÆÏÒͦ. îÁÐÒÉËÌÁÄ, \"2Ê ÐÏ×ÅÒÈ\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "÷ÁÍ ÐÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ÄÅÑ˦ ÄÁΦ ÔÕÔ.\n"
-#~ "\n"
-#~ "  * îÁÚ×Á ÞÅÒÇÉ ÄÒÕËÕ: ÐÒÏÇÒÁÍÁ ÄÒÕËÕ ËÏÒÉÓÔÕ¤ÔØÓÑ ÎÁÚ×ÏÀ \"lp\", ËÏÌÉ "
-#~ "ÎÅ\n"
-#~ "    ×ÓÔÁÎÏ×ÌÅΦ ¦ÎÛ¦ ÎÁÚ×É. ïÔÖÅ, ×É ÐÏ×ÉÎΦ ÍÁÔÉ ÐÒÉÎÔÅÒ Ú ÎÁÚ×ÏÀ \"lp\" "
-#~ "×\n"
-#~ "    Ó×Ï§Ê ÓÉÓÔÅͦ. ñËÝÏ ×É ÍÁ¤ÔÅ Ô¦ÌØËÉ ÏÄÉÎ ÐÒÉÎÔÅÒ, ×É ÍÏÖÅÔÅ ÍÁÔÉ\n"
-#~ "    ˦ÌØËÁ Ò¦ÚÎÉÈ ÎÁÚ× (ÐÓÅ×Ä) ÄÌÑ ÎØÏÇÏ. ¶ÍÅÎÁ Ô¦ÌØËÉ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-#~ "    ÒÏÚĦÌÉÔÉ Í¦Ö ÓÏÂÏÀ ÓÉÍ×ÏÌÏÍ ËÁÎÁÌÕ (\"|\"). ïÔÖÅ, ÑËÝÏ ×É ×¦ÄÄÁ¤ÔÅ\n"
-#~ "    ÐÅÒÅ×ÁÇÕ Ñ˦ÊÓØ Â¦ÌØÛ ÏÓÍÉÓÌÅÎ¦Ê ÎÁÚצ, ×É ÍÁ¤ÔÅ ×ËÁÚÁÔÉ §§ ÐÅÒÛÏÀ,\n"
-#~ "    ÔÏÂÔÏ: \"í¦Ê ÐÒÉÎÔÅÒ|lp\".\n"
-#~ "\n"
-#~ "  * ëÁÔÁÌÏÇ ÞÅÒÇÉ ÄÒÕËÕ: × ÃØÏÍÕ ËÁÔÁÌÏÚ¦ ÂÕÄÕÔØ ÔÉÍÞÁÓÏ×Ï ÚÂÅÒ¦ÇÁÔÉÓÑ\n"
-#~ "    ÒÏÂÏÔÉ, ÐÅÒÅÄÁΦ ÎÁ ÄÒÕË. îÅ ÚͦÎÀÊÔÅ ÓÔÁÎÄÁÒÔÎÅ ÚÎÁÞÅÎÎÑ ÃØÏÇÏ\n"
-#~ "    ÐÁÒÁÍÅÔÒÕ, ÑËÝÏ ×É ÎÅ ×ÐÅ×ÎÅΦ × Ó×Ï§È Ä¦ÑÈ. \n"
-#~ "\n"
-#~ "  * ú'¤ÄÎÁÎÎÑ Ú ÐÒÉÎÔÅÒÏÍ: ÑËÝÏ ÐÒÉÎÔÅÒ Æ¦ÚÉÞÎÏ Ú'¤ÄÎÁÎÉÊ Ú\n"
-#~ "    ËÏÍÐ'ÀÔÅÒÏÍ, ×ÉÂÅÒ¦ÔØ \"ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ\". \n"
-#~ "    ñËÝÏ ×É ÈÏÞÅÔÅ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦, ÑËÉÊ Ð¦Ä'¤ÄÎÁÎÉÊ ÞÅÒÅÚ\n"
-#~ "    ÍÅÒÅÖÕ ÄÏ ¦ÎÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ Ú ÓÉÓÔÅÍÏÀ àΦËÓ, ×ÉÂÅÒ¦ÔØ \"÷¦ÄÄÁÌÅÎÉÊ\n"
-#~ "    ÐÒÉÎÔÅÒ\".\n"
-#~ "\n"
-#~ "    ñËÝÏ ×É ÈÏÞÅÔÅ ÄÒÕËÕ×ÁÔÉ ÎÁ ÐÒÉÎÔÅÒ¦, ÑËÉÊ Ð¦ÄËÌÀÞÅÎÉÊ ÄÏ ËÏÍÐ'ÀÔÅÒÁ "
-#~ "Ú\n"
-#~ "    ÓÉÓÔÅÍÏÀ Microsoft Windows (ÁÂÏ ÎÁ ÍÁÛÉΦ Ú àΦËÓÏÍ, ÑËÁ "
-#~ "ËÏÒÉÓÔÕ¤ÔØÓÑ\n"
-#~ "    ÐÒÏÔÏËÏÌÏÍ SMB), ×ÉÂÅÒ¦ÔØ \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "    ñËÝÏ ×É ÈÏÞÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÒÉÎÔÅÒÏÍ, ÑËÉÊ Ð¦Ä'¤ÄÎÁÎÉÊ ÄÏ ÍÅÒÅÖ¦\n"
-#~ "    NetWare, ×ÉÂÅÒ¦ÔØ \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "îÅ ×ÄÁÌÏÓÑ ×¦ÄÛÕËÁÔÉ ÷ÁÛ ÐÒÉÎÔÅÒ. âÕÄØ-ÌÁÓËÁ, ××ÅĦÔØ ÐÒÉÓÔÒ¦Ê, ÄÏ\n"
-#~ "ÑËÏÇÏ ×¦Î Ð¦ÄËÌÀÞÅÎÉÊ.\n"
-#~ "\n"
-#~ "\n"
-#~ "äÌÑ ÄÏצÄËÉ: ¦ÌØÛ¦ÓÔØ ÐÒÉÎÔÅÒ¦× Ð¦ÄËÌÀÞÁÀÔØÓÑ ÄÏ ÐÁÒÁÌÅÌØÎÏÇÏ ÐÏÒÔÕ. \n"
-#~ "\n"
-#~ "÷¦Î Ú×ÅÔØÓÑ \"/dev/lp0\" × ì¦ÎÁËÓ¦ ¦ \"LPT1\" × Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "÷É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ Ó×¦Ê ÐÒÉÎÔÅÒ Õ ÓÐÉÓËÕ ÐÏÄÁÎÏÍÕ ×ÉÝÅ."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "âÕÄØ-ÌÁÓËÁ, ×ÉÂÅÒ¦ÔØ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÷ÁÛÏÇÏ\n"
-#~ "ÐÒÉÎÔÅÒÁ. ú×ÅÒΦÔØÓÑ ÄÏ ÄÏËÕÍÅÎÔÁæ§, ÑËÝÏ ×É ÎÅ ÚÎÁ¤ÔŠצÒÎÉÈ\n"
-#~ "ÚÎÁÞÅÎØ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÁ ÎÁÓÔÕÐÎÏÍÕ ËÒÏæ ×É ÚÍÏÖÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÃÀ ËÏÎƦ­ÕÒÁæÀ ¦ ×ÉÐÒÁ×ÉÔÉ\n"
-#~ "§§ ÑËÝÏ ÝÏÓØ ÎÅ ÓÐÒÁÃÀ¤ ÔÁË, ÑË ×É ÐÅÒÅÄÂÁÞÁÌÉ."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ××ÅÓÔÉ ÐÁÒÏÌØ ÄÌÑ ËÏÒÉÓÔÕ×ÁÞÁ \"root\" ÄÌÑ ÷ÁÛϧ\n"
-#~ "ÓÉÓÔÅÍÉ Mandrake ì¦ÎÁËÓ. ðÁÒÏÌØ ÐÏÔÒ¦ÂÎÏ ××ÏÄÉÔÉ Äצަ, ÝÏÂ\n"
-#~ "ÐÅÒÅËÏÎÁÔÉÓÑ, ÝÏ ×¦Î ÂÕ× ××ÅÄÅÎÉÊ ÏÂÉÄ×Á ÒÁÚÉ ÏÄÉÎ ¦ ÔÏÊ ÖÅ\n"
-#~ "\n"
-#~ "\n"
-#~ "Root - ÃÅ ÁÄͦΦÓÔÒÁÔÏÒ ÓÉÓÔÅÍÉ ¦ ¤ÄÉÎÉÊ ËÏÒÉÓÔÕ×ÁÞ, ÑËÏÍÕ ÄÏÚ×ÏÌÅÎÏ\n"
-#~ "ÚͦÎÀ×ÁÔÉ ÓÉÓÔÅÍÎÕ ËÏÎƦÇÕÒÁæÀ. ôÏÍÕ ×ÉÂÉÒÁÊÔÅ ÃÅÊ ÐÁÒÏÌØ ÄÕÖÅ\n"
-#~ "ÄÂÁÊÌÉ×Ï! îÅÁ×ÔÏÒÉÚÏ×ÁÎÅ ËÏÒÉÓÔÕ×ÁÎÎÑ ÷ÁÛÏÀ ÓÉÓÔÅÍÏÀ ÍÏÖÅ ÂÕÔÉ\n"
-#~ "ÎÁÄÚ×ÉÞÁÊÎÏ ÎÅÂÅÚÐÅÞÎÉÍ ÄÌÑ Ã¦Ì¦ÓÎÏÓÔ¦ ÓÉÓÔÅÍÉ ÔÁ ÄÁÎÉÈ Õ Î¦Ê, Á\n"
-#~ "ÔÁËÏÖ ÄÌÑ ¦ÎÛÉÈ ÓÉÓÔÅÍ ÄÏ Îŧ ЦÄËÌÀÞÅÎÉÈ. \n"
-#~ "\n"
-#~ "\n"
-#~ "ðÁÒÏÌØ ÐÏ×ÉÎÅÎ ÓËÌÁÄÁÔÉÓÑ ¦Ú ÓÕͦۦ ÁÌÆÁצÔÎÏ-ÃÉÆÒÏ×ÉÈ ÓÉÍ×ÏÌ¦× ¦ ÂÕÔÉ\n"
-#~ "ÎÅ ÍÅÎÛÅ, Î¦Ö 8 ÓÉÍ×ÏÌ¦× ÚÁ×ÄÏ×ÖËÉ. êÏÇÏ Î¦ËÏÌÉ ÎÅ ÍÏÖÎÁ ΦÄÅ\n"
-#~ "ÚÁÐÉÓÕ×ÁÔÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "îÅ ×ÉÂÉÒÁÊÔÅ ÚÁÎÁÄÔÏ ÄÏ×ÇÉÊ ÐÁÒÏÌØ ÁÂÏ ÚÁÎÁÄÔÏ ÓËÌÁÄÎÉÊ: ÷ÁÍ ÔÒÅÂÁ\n"
-#~ "ÊÏÇÏ ÐÁÍ'ÑÔÁÔÉ."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ÓÔ×ÏÒÉÔÉ ÏÄÉÎ ÁÂÏ Â¦ÌØÛÅ \"Ú×ÉÞÁÊÎÉÈ\" ÒÁÈÕÎË¦× ÄÌÑ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÞ¦× (ÎÅ \"ÐÒÉצÌÅÊÏ×ÁÎÉÈ\" ÑË root ÒÁÈÕÎ˦×). ÷É ÍÏÖÅÔÅ\n"
-#~ "ÓÔ×ÏÒÉÔÉ ÏÄÉÎ ÁÂÏ Â¦ÌØÛÅ ÒÁÈÕÎË¦× ÄÌÑ ËÏÖÎÏÇÏ Ú ËÏÒÉÓÔÕ×ÁÞ¦× ÷ÁÛϧ\n"
-#~ "ÓÉÓÔÅÍÉ. ÷¦ÄͦÔØÔÅ, ÝÏ ËÏÖÅÎ ÒÁÈÕÎÏË ¦Ú ÓÔ×ÏÒÅÎÉÈ ÷ÁÍÉ ÂÕÄÅ ÍÁÔÉ Ó×ϧ\n"
-#~ "×ÌÁÓΦ ÕÓÔÁÎÏ×ËÉ (ÔÁ˦, ÑË ÇÒÁƦÞÎÅ ÓÅÒÅÄÏ×ÉÝÅ, ÕÓÔÁÎÏ×ËÉ ÐÒÏÇÒÁÍ,\n"
-#~ "ÔÏÝÏ) ¦ Ó×ÏÀ ×ÌÁÓÎÕ \"ÄÏÍÁÛÎÀ ÄÉÒÅËÔÏÒ¦À\", ÄÅ ÚÂÅÒ¦ÇÁÀÔØÓÑ ×Ó¦ æ\n"
-#~ "ÕÓÔÁÎÏ×ËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ðÅÒÛ ÚÁ ×ÓÅ ÓÔ×ÏÒ¦ÔØ ÒÁÈÕÎÏË ÄÌÑ ÓÅÂÅ ÓÁÍÏÇÏ! îÁצÔØ, ÑËÝÏ ×É ÂÕÄÅÔÅ\n"
-#~ "¤ÄÉÎÉÍ ËÏÒÉÓÔÕ×ÁÞÅÍ Ã¦¤§ ÓÉÓÔÅÍÉ, ×É îå ðï÷éîî¶ ËÏÒÉÓÔÕ×ÁÔÉÓÑ Ó×ϤÀ\n"
-#~ "ÓÉÓÔÅÍÏÀ ÑË root ÄÌÑ Ú×ÉÞÁÊÎϧ ÒÏÂÏÔÉ: ÃÅ ÄÕÖÅ ×ÉÓÏËÉÊ ÒÉÚÉË. ýÏÂ\n"
-#~ "ÚÒÏÂÉÔÉ Ó×ÏÀ ÓÉÓÔÅÍÕ ÎÅÐÒÉÇÏÄÎÏÀ ÄÕÖÅ ÞÁÓÔÏ ÄÏÓÔÁÔÎØÏ ÏÄΦ¤§ ÐÏÍÉÌËÉ\n"
-#~ "ÐÒÉ ÄÒÕËÕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ïÔÖÅ, ×É ÂÕÄÅÔÅ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ ¦Ú Ó×Ï§Í ×ÌÁÓÎÉÍ ¦ÍÅÎÅÍ ÔÁ\n"
-#~ "ÐÁÒÏÌÅÍ, Ñ˦ ×É ÓÔ×ÏÒÉÔÅ, ÔÁ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ ÑË root ÄÌÑ\n"
-#~ "ÁÄͦΦÓÔÒÁæ§."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "óÔ×ÏÒÅÎÎÑ ÄÉÓËÕ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÎÁÓÔ¦ÊÌÉ×Ï ÒÅËÏÍÅÎÄÕ¤ÔØÓÑ. ñËÝÏ ×É ÎÅ\n"
-#~ "ÚÍÏÖÅÔÅ ÚÁ×ÁÎÔÁÖÉÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ -- ÃÅ ¤ÄÉÎÉÊ ÛÌÑÈ ×ÒÑÔÕ×ÁÔÉ ÷ÁÛÕ\n"
-#~ "ÓÉÓÔÅÍÕ ÂÅÚ ÐÅÒÅ×ÓÔÁÎÏ×ÌÅÎÎÑ ×Ó¦¤§ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "ïÓÎÏ×Φ ÐÁÒÁÍÅÔÒÉ ÄÌÑ LILO ÔÁ grub:\n"
-#~ "  - ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÕ×ÁÎÎÑ: ÷ÓÔÁÎÏ×ÌÀ¤ ÎÁÚ×Õ ÐÒÉÓÔÒÏÀ (ÎÁÐÒÉËÌÁÄ,\n"
-#~ "ЦÄÒÏÚÄ¦Ì ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ), ÑËÉÊ Í¦ÓÔÉÔØ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÓÅËÔÏÒ. ñËÝÏ\n"
-#~ "×É ÎÁÐÅ×ÎÅ ÎÅ ÚÎÁ¤ÔÅ, ÝÏ ÔÒÅÂÁ ÚÒÏÂÉÔÉ ¦ÎÁËÛÅ, ×ËÁÖ¦ÔØ \"/dev/hda\" ÔÕÔ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ: ÷ÉÚÎÁÞÁ¤ ÞÁÓ Õ\n"
-#~ "ÏÄÉÎÉÃÑÈ, Ò¦×ÎÉÈ ÏÄÎ¦Ê ÄÅÓÑÔ¦Ê ÓÅËÕÎÄÉ, ÑËÉÊ ÓÉÓÔÅÍÁ ÂÕÄÅ ÞÅËÁÔÉ ÐÅÒÛ,\n"
-#~ "Î¦Ö ÐÏÞÁÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ, ×ËÁÚÁÎϧ × ËÏÎƦÇÕÒÁæ§. ãÅ\n"
-#~ "ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ É ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÓÉÓÔÅÍÁ ÚÒÁÚÕ Ö ÐÒÉÓÔÕÐÁ¤\n"
-#~ "ÄÏ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ Ð¦ÓÌÑ ¦Î¦Ã¦Á̦ÚÁæ§ ËÌÁצÁÔÕÒÉ. ðÒÏÇÒÁÍÁ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎÎÑ ÎÅ ÒÏÂÉÔØ ÐÁÕÚÉ ÚÏ×Ó¦Í, ÑËÝÏ ÐÁÒÁÍÅÔÒ \"delay\" ÄÏÒ¦×ÎÀ¤\n"
-#~ "ÎÕÌÀ ÁÂÏ ÐÒÏÐÕÝÅÎÏ ÚÏ×Ó¦Í.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ÷¦ÄÅÏ ÒÅÖÉÍ: ÷ËÁÚÕ¤ צÄÅÏ ÒÅÖÉÍ VGA, ÑËÉÊ ÐÏÔÒ¦ÂÎÏ ×ÍÉËÎÕÔÉ ÐÒÉ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ. íÏÖÅ ÍÁÔÉ ÔÁ˦ ÚÎÁÞÅÎÎÑ:\n"
-#~ "\n"
-#~ "    * ÎÏÒÍÁÌØÎÉÊ: ×ÓÔÁÎÏ×ÌÀ¤ Ú×ÉÞÁÊÎÉÊ ÔÅËÓÔÏ×ÉÊ ÒÅÖÉÍ 80x25.\n"
-#~ "\n"
-#~ "    * <ÞÉÓÌÏ>: ×ÓÔÁÎÏ×ÌÀ¤ צÄÐÏצÄÎÉÊ ÔÅËÓÔÏ×ÉÊ ÒÅÖÉÍ.\n"
-#~ "\n"
-#~ "  - ïÞÉÝÁÔÉ ÄÉÒÅËÔÏÒ¦À \"/tmp\" ÐÒÉ ËÏÖÎÏÍÕ ÚÁ×ÁÎÔÁÖÅÎΦ: ÑËÝÏ ×ÁÍ\n"
-#~ "ÐÏÔÒ¦ÂÎÏ ÝÏ ×Ó¦ ÆÁÊÌÉ ÔÁ ÄÉÒÅËÔÏÒ¦§ × ÄÉÒÅËÔÏÒ¦§.\n"
-#~ "\n"
-#~ "  - ôÏÞÎÉÊ ÒÏÚÍ¦Ò ÏÐÅÒÁÔÉ×Îϧ ÐÁÍ'ÑÔ¦: ÎÁ ÖÁÌØ ÎÅ ¦ÓÎÕ¤ ÓÔÁÎÄÁÒÔÎÏÇÏ\n"
-#~ "ÓÐÏÓÏÂÕ ÄÌÑ ÔÏÇÏ, ÝÏ ĦÚÎÁÔÉÓÑ ÔÏÞÎÉÊ ÒÏÚÍ¦Ò ÐÁÍ'Ô¦ Õ BIOS'Á. ñË\n"
-#~ "ÎÁÓ̦ÄÏË ÃØÏÇÏ - ì¦ÎÁËÓ ÍÏÖÅ ÎÅצÒÎÏ × ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ×ÉÚÎÁÞÉÔÉ ÏÂ'¤Í\n"
-#~ "ÐÁÍ'ÑÔ¦ ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ. ñËÝÏ ÃÅ ÔÁË, ×É ÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ×¦ÒÎÉÊ\n"
-#~ "ÏÂ'¤Í ÔÕÔ. úÁÕ×ÁÖÔÅ, ÝÏ Ò¦ÚÎÉÃÑ Õ 2-4íÂ Í¦Ö ÓÐÒÁ×ÖÎ¦Í ÏÂ'¤ÍÏÍ ¦ ÔÉÍ,\n"
-#~ "ÐÒÏ ÑËÉÊ ÐÏצÄÏÍÌѤ BIOS ÎÅÓÕÔÔ¤×Á."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ÃÅ ÓÉÓÔÅÍÎÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÄÌÑ SPARC: צΠÍÏÖÅ ÚÁ×ÁÎÔÁÖÉÔÉ ÁÂÏ\n"
-#~ "GNU/ì¦ÎÁËÓ ÁÂÏ ÂÕÄØ-ÑËÕ ¦ÎÛÕ ÏÐÅÒÁæÊÎÕ ÓÉÓÔÅÍÕ ÎÁ ÷ÁÛÏÍÕ\n"
-#~ "ËÏÍÐ'ÀÔÅÒ¦. úÁ ÎÏÒÍÁÌØÎÉÈ ÕÍÏ× Ã¦ ÏÐÅÒÁæÊΦ ÓÉÓÔÅÍÉ ×¦ÒÎÏ\n"
-#~ "×ÉÚÎÁÞÁÀÔØÓÑ ÔÁ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ñËÝÏ ÃÅ ÎÅ ÔÁË, ×É ÍÏÖÅÔÅ ÄÏÄÁÔÉ\n"
-#~ "ÐÏÔÒ¦ÂÎÉÊ ÐÕÎËÔ ÓÁÍÏÓÔ¦ÊÎÏ. õ×ÁÖÎÏ ×ÉÂÅÒ¦ÔØ ÐÏÔÒ¦ÂΦ ÐÁÒÁÍÅÔÒÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷É, ÍÏÖÌÉ×Ï, ÔÁËÏÖ ÚÁÈÏÞÅÔÅ ÚÁËÒÉÔÉ ÄÏÓÔÕÐ ÄÏ ÃÉÈ ÏÐÅÒÁæÊÎÉÈ ÓÉÓÔÅÍ\n"
-#~ "¦ÎÛÉÍ, × ÃØÏÍÕ ×ÉÐÁÄËÕ ×É ÍÏÖÅÔÅ ÓÔÅÒÔÉ ×¦ÄÐÏצÄΦ ÐÕÎËÔÉ × ÆÁÊ̦\n"
-#~ "ËÏÎƦ­ÕÒÁæ§. áÌÅ × ÃØÏÍÕ ×ÉÐÁÄËÕ ÷ÁÍ ÐÏÔÒ¦ÂÎÁ ÂÕÄÅ ÓÐÅæÁÌØÎÉÊ\n"
-#~ "ÄÉÓË, ÝÏ ÚÁ×ÁÎÔÁÖÉÔÉ Ã¦ ÓÉÓÔÅÍÉ!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "ïÓÎÏ×Φ ÐÁÒÁÍÅÔÒÉ ÄÌÑ SILO:\n"
-#~ "  - ðÒÉÓÔÒ¦Ê ÚÁ×ÁÎÔÁÖÕ×ÁÎÎÑ: ÷ÓÔÁÎÏ×ÌÀ¤ ÎÁÚ×Õ ÐÒÉÓÔÒÏÀ (ÎÁÐÒÉËÌÁÄ,\n"
-#~ "ÒÏÚÄ¦Ì ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ), ËÕÄÉ ÚÁÐÉÓÕ¤ÔØÓÑ ¦ÎÆÏÒÍÁÃ¦Ñ ÎÅÏÂȦÄÎÁ ÄÌÑ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ. ñËÝÏ ×É ÎÁÐÅ×ÎÅ ÎÅ ÚÎÁ¤ÔÅ, ÝÏ ÔÒÅÂÁ ÚÒÏÂÉÔÉ\n"
-#~ "¦ÎÁËÛÅ, ×ËÁÖ¦ÔØ \"ðÅÒÛÉÊ ÓÅËÔÏÒ ÄÉÓËÕ (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ðÁÕÚÁ ÐÅÒÅÄ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ: ÷ÉÚÎÁÞÁ¤ ÞÁÓ Õ\n"
-#~ "ÏÄÉÎÉÃÑÈ Ò¦×ÎÉÈ ÏÄÎ¦Ê ÄÅÓÑÔ¦Ê ÓÅËÕÎÄÉ, ÑËÉÊ ÓÉÓÔÅÍÁ ÂÕÄÅ ÞÅËÁÔÉ ÐÅÒÛ,\n"
-#~ "Î¦Ö ÐÏÞÁÔÉ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÏÓÎÏ×Îϧ ÓÉÓÔÅÍÉ, ×ËÁÚÁÎϧ × ËÏÎƦÇÕÒÁæ§. ãÅ\n"
-#~ "ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ É ÔÉÈ ×ÉÐÁÄËÁÈ, ËÏÌÉ ÓÉÓÔÅÍÁ ÚÒÁÚÕ Ö ÐÒÉÓÔÕÐÁ¤\n"
-#~ "ÄÏ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÓÉÓÔÅÍÉ Ð¦ÓÌÑ ¦Î¦Ã¦Á̦ÚÁæ§ ËÌÁצÁÔÕÒÉ. ðÒÏÇÒÁÍÁ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎÎÑ ÎÅ ÒÏÂÉÔØ ÐÁÕÚÉ ÚÏ×Ó¦Í, ÑËÝÏ ÐÁÒÁÍÅÔÒ \"delay\" ÄÏÒ¦×ÎÀ¤\n"
-#~ "ÎÕÌÀ ÁÂÏ ÐÒÏÐÕÝÅÎÏ ÚÏ×Ó¦Í."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ÞÁÓ ÚÁÊÎÑÔÉÓÑ ËÏÎƦÇÕÒÁæ¤À ÓÉÓÔÅÍÉ X Window, ÑËÁ ÌÅÖÉÔØ × ÓÅÒæ\n"
-#~ "ÇÒÁƦÞÎÏÇÏ ÓÅÒÅÄÏ×ÉÝÁ (GUI - Graphical User Interface)\n"
-#~ "GNU/ì¦ÎÁËÓÁ. äÌÑ ÃØÏÇÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÓËÏÎƦÇÕÒÕ×ÁÔÉ Ó×ÏÀ צÄÅÏÐÌÁÔÕ ÔÁ\n"
-#~ "ÍÏΦÔÏÒ. â¦ÌØÛ¦ÓÔØ ËÒÏË¦× ÐÒÉ ÃØÏÍÕ Á×ÔÏÍÁÔÉÚÏ×ÁΦ, ÏÔÖÅ ÷ÁÛÏÀ ÚÁÄÁÞÅÀ\n"
-#~ "ÂÕÄÅ × ÏÓ×ÎÏ×ÎÏÍÕ × ÐÅÒÅצÒæ ×ÉÚÎÁÞÅÎÉÈ ÐÁÒÁÍÅÔÒ¦× ÔÁ Õ ×¦ÄÐÏצÄÑÈ\n"
-#~ "\"ôÁË\" :)\n"
-#~ "\n"
-#~ "\n"
-#~ "ð¦ÓÌÑ ÚÁ˦ÎÞÅÎÎÑ ËÏÎƦÇÕÒÕ×ÁÎÎÑ X ÓÔÁÒÔÕ¤ (ÑËÝÏ ×É ÎÅ ×ËÁÖÅÔÅ DrakX\n"
-#~ "ÐÒÏÔÉÌÅÖÎÅ), ÏÔÖÅ ×É ÚÍÏÖÅÔÅ ÐÅÒÅצÒÉÔÉ ¦ ×ÐÅ×ÎÉÔÉÓÑ, ÝÏ ×Ó¦ ÷ÁÛ¦\n"
-#~ "ÕÓÔÁÎÏ×ËÉ ×¦ÒΦ. ñËÝÏ ÷ÁÍ ÎŠЦÄÈÏÄÑÔØ Ã¦ ÕÓÔÁÎÏ×ËÉ, ×É ÍÏÖÅÔÅ\n"
-#~ "ÐÏ×ÅÒÔÁÔÉÓÑ ÎÁÚÁÄ ¦ ÚͦÎÀ×ÁÔÉ §È ÂÕÄØ-ÑËÕ Ë¦ÌØ˦ÓÔØ ÒÁÚ¦×. "
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "ñËÝÏ ¦Ú ËÏÎƦ­ÕÒÁæ¤À X Window ÝÏÓØ ÎÅ ×ÐÏÒÑÄËÕ, ÓËÏÒÉÓÔÁÊÔÅÓÑ ÃÉÍÉ\n"
-#~ "ÏÐæÑÍÉ ÄÌÑ ÔÏÇÏ, ÝÏ צÒÎÏ ×ÓÔÁÎÏ×ÉÔÉ X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "ñËÝÏ ×É ÈÏÞÅÔÅ ÒŤÓÔÒÕ×ÁÔÉÓÑ × ÓÉÓÔÅͦ Ú ÇÒÁƦÞÎÏÇÏ ÅËÒÁÎÕ, ×ÉÂÅÒ¦ÔØ\n"
-#~ "\"ôÁË\". ¶ÎÁËÛÅ - ×ÉÂÅÒ¦ÔØ \"î¦\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "íÏÖÅÔÅ ×ÉÂÒÁÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÌÑ ÓÉÓÔÅÍÉ. ú×ÅÒΦÔØÓÑ, ÂÕÄØ ÌÁÓËÁ, ÄÏ\n"
-#~ "ЦÄÒÕÞÎÉËÁ ÄÌÑ ÏÔÒÉÍÁÎÎÑ ÐÏ×Îϧ ¦ÎÆÏÒÍÁæ§. úÁÇÁÌÏÍ, ÑËÝÏ ×É ÎÅ\n"
-#~ "ÚÎÁ¤ÔÅ, ÝÏ ×ÉÂÒÁÔÉ, ÚÁÌÉÛÔÅ ÓÔÁÎÄÁÒÎÉÊ ÐÕÎËÔ.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "÷ÁÛÁ ÓÉÓÔÅÍÁ ÂÕÄÅ ÚÁÒÁÚ ÐÅÒÅ×ÁÎÔÁÖÅÎÁ.\n"
-#~ "\n"
-#~ "ð¦ÓÌÑ ÃØÏÇÏ Á×ÔÏÍÁÔÉÞÎÏ ÚÁ×ÁÎÔÁÖÉÔØÓÑ ÷ÁÛÁ ÎÏ×Á ÓÉÓÔÅÍÁ\n"
-#~ "Mandrake Linux. ñËÝÏ ×É ÈÏÞÅÔÅ ÚÁ×ÁÎÔÁÖÉÔÉ ¦ÎÛÕ ÓÉÓÔÅÍÕ, ÞÉÔÁÊÔÅ,\n"
-#~ "ÂÕÄØ-ÌÁÓËÁ, ÄÏÄÁÔËÏצ ¦ÎÓÔÒÕËæ§."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "þÅÓØËÁ (ÐÒÏÇÒÁͦÓÔ)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "óÌÏ×ÁÃØËÁ (ÐÒÏÇÒÁͦÓÔÉ)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "îÁÚ×Á ÐÒÏƦÌÀ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "úÁÐÉÓÁÔÉ /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "æÏÒÍÁÔÕ×ÁÔÉ ×ÓÅ"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ð¦ÓÌÑ ÆÏÒÍÁÔÕ×ÁÎÎÑ ×Ó¦È Ð¦ÄÒÏÚĦ̦×,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "×Ó¦ ÄÁΦ ÎÁ ÃÉÈ Ð¦ÄÒÏÚĦÌÁÈ ÂÕÄÅ ×ÔÒÁÞÅÎÏ"
-
-#~ msgid "Reload"
-#~ msgstr "ðÅÒÅÚÁ×ÁÎÔÁÖÉÔÉ"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "þÉ ÈÏÞÅÔÅ ÷É ÓÔ×ÏÒÉÔÉ Á×ÔÏ-ÕÓÔÁÎÏ×ÏÞÎÕ ÄÉÓËÅÔÕ ÄÌÑ ÂÁÇÁÔÏÒÁÚÏ×ÉÈ "
-#~ "ÕÓÔÁÎÏ×ÏË ÓÉÓÔÅÍÉ?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ëÏÎƦ­ÕÒÁÃ¦Ñ ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "äÌÑ ×¦ÄÄÁÌÅÎÏÇÏ ÓÅÒ×ÅÒÁ CUPS ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ ËÏÎƦ­ÕÒÕ×ÁÔÉ ÐÒÉÎÔÅÒ¦×,\n"
-#~ "×Ó¦ ÐÒÉÎÔÅÒÉ ÂÕÄÕÔØ Á×ÔÏÍÁÔÉÞÎÏ ×ÉÚÎÁÞÅΦ, õ ×ÉÐÁÄËÕ, ËÏÌÉ ÓÅÒ×ÅÒ\n"
-#~ "ÚÎÁÈÏÄÉÔØÓÑ Õ ¦ÎÛ¦Ê ÍÅÒÅÖ¦, ÷É ÍÁ¤ÔÅ ÎÁÄÁÔÉ ÔÕÔ IP ÁÄÒÅÓÕ ÓÅÒ×ÅÒÁ CUPS\n"
-#~ "¦ (ÎÅÏÂÏ×'ÑÚËÏ×Ï) ÎÏÍÅÒ ÐÏÒÔÁ."
-
-#~ msgid "Remote queue"
-#~ msgstr "÷¦ÄÄÁÌÅÎÁ ÎÁÚ×Á ÐÒÉÎÔÅÒÁ"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "íÏΦÔÏÒÉέ ÍÅÒÅÖ¦"
-
-#~ msgid "Profile "
-#~ msgstr "ðÒÏƦÌØ "
-
-#~ msgid "Statistics"
-#~ msgstr "óÔÁÔÉÓÔÉËÁ"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "û×ÉÄ˦ÓÔØ ÐÅÒÅÄÁÞ¦:"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "û×ÉÄ˦ÓÔØ ÐÒÉÊÏÍÕ: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "ú×'ÑÚÕÀÓØ Ú ¦ÎÔÅÒÎÅÔÏÍ"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "÷¦Ä'¤ÄÎÕÀÓØ ×¦Ä ¦ÎÔÅÒÎÅÔÕ"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "îÅ ×ÄÁÌÏÓØ ×¦Ä'¤ÄÎÁÔÉÓÑ ×¦Ä ¦ÎÔÅÒÎÅÔÕ"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "úÁ˦ÎÞÉÌÏÓØ ×¦Ä'¤ÄÎÁÎÎÑ ×¦Ä ¦ÎÔÅÒÎÅÔÕ"
-
-#~ msgid "Connection complete."
-#~ msgstr "ú'¤ÄÎÁÎÎÑ ÚÁ˦ÎÞÉÌÏÓØ."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "îÅ×ÄÁÌÅ  Ú'¤ÄÎÁÎÎÑ.\n"
-#~ "ðÅÒÅצÒÔÅ Ó×ÏÀ ËÏÎƦ­ÕÒÁæÀ × ãÅÎÔÒ¦ ëÅÒÕ×ÁÎÎÑ íÁÎÄÒÅÊË"
-
-#~ msgid "sent: "
-#~ msgstr "ÐÅÒÅÄÁÎÏ:"
-
-#~ msgid "received: "
-#~ msgstr "ÏÔÒÉÍÁÎÏ:"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "úͦÓÔ ÆÁÊÌÕ ËÏÎƦÇÕÒÁæ§ ÎÅ ÍÏÖÎÁ ¦ÎÔÅÒÐÒÅÔÕ×ÁÔÉ."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "îÅÒÏÚЦÚÎÁÎÉÊ ÆÁÊÌ ËÏÎƦ­ÕÒÁæ§"
-
-#~ msgid "Adapter"
-#~ msgstr "ðÌÁÔÁ"
-
-#~ msgid "Disable network"
-#~ msgstr "úÁÂÏÒÏÎÉÔÉ ÍÅÒÅÖÕ"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ×É ÍÏÖÅÔÅ ×ÉÐÒÏÂÕ×ÁÔÉ ÷ÁÛÕ ÍÉÛËÕ. óÐÒÏÂÕÊÔÅ ÐÏËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-#~ "ËÌÁצÛÁÍÉ ÔÁ ËÏ̦ÝÁÔËÏÍ ÝÏ ÐÅÒÅצÒÉÔÉ ×¦ÒΦÓÔØ ÕÓÔÁÎÏ×ÏË. ñËÝÏ ÝÏÓØ\n"
-#~ "ÎÅ × ÐÏÒÑÄËÕ, ËÌÁÃΦÔØ ÎÁ \"÷¦ÄͦÎÉÔÉ\" ÝÏ ×ÉÂÒÁÔÉ ¦ÎÛÉÊ ÄÒÁÊ×ÅÒ."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ DSL (ÁÂÏ ADSL)"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "÷É ÐÒÑÍÏ ÍÏÖÅÔÅ ×ËÁÚÁÔÉ URI ÝÏ ÍÁÔÉ ÄÏÓÔÕÐ ÄÏ ÐÒÉÎÔÅÒÁ ÞÅÒÅÚ CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "ôÁË, ÎÁÄÒÕËÕ×ÁÔÉ ÔÅÓÔÏ×Õ ÓÔÏÒ¦ÎËÕ × ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "ôÁË, ÎÁÄÒÕËÕ×ÁÔÉ ÔÅÓÔÏ×Õ ÓÔÏÒ¦ÎËÕ × PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "òÏÚÍ¦Ò ÐÁÐÅÒÕ"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "÷ÉÊÎÑÔÉ ÓÔÏÒ¦ÎËÕ Ð¦ÓÌÑ ÚÁ˦ÎÞÅÎÎÑ ÄÒÕËÕ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ïÐæ§ ÄÒÁÊ×ÅÒÁ Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ïÐæ§ ÇÌÉÂÉÎÉ ËÏÌØÏÒÕ"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "äÒÕËÕ×ÁÔÉ ÔÅËÓÔ Õ ×ÉÇÌÑĦ PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "÷ÉÐÒÁ×ÌÑÔÉ ÅÆÅËÔ \"ÓÈÏÄÉÎÏË\"?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "ë¦ÌØ˦ÓÔØ ÓÔÏÒ¦ÎÏË ÎÁ ÏÄÉÎ ÄÒÕËÏ×ÁÎÉÊ ÁÒËÕÛ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "ì¦×Á/ÐÒÁ×Á ÇÒÁÎÉÃÑ × ÐÕÎËÔÁÈ (1/72 ÄÀÊÍÁ)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "÷ÅÒÈÎÑ/ÎÉÖÎÑ  ÇÒÁÎÉÃÑ × ÐÕÎËÔÁÈ (1/72 ÄÀÊÍÁ)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "äÏÄÁÔËÏצ ÐÁÒÁÍÅÔÒÉ ÄÌÑ GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "äÏÄÁÔËÏצ ÕÓÔÁÎÏ×ËÉ ÄÌÑ ÔÅËÓÔÕ"
-
-#~ msgid "Reverse page order"
-#~ msgstr "ú×ÏÒÏÔÎ¦Ê ÐÏÒÑÄÏË ÓÔÏÒ¦ÎÏË"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ Ú'¤ÄÎÁÎÎÑ ×¦ÄÄÁÌÅÎÏÇÏ ÐÒÉÎÔÅÒÁ"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "ëÏÖÎÅÎ ÐÒÉÎÔÅÒ ÐÏ×ÉÎÅÎ ÍÁÔÉ ÎÁÚ×Õ (ÎÁÐÒÉËÌÁÄ lp). íÏÖÕÔØ ÂÕÔÉ\n"
-#~ "×ÉÚÎÁÞÅΦ ÔÁËÏÖ ¦ÎÛ¦ ÐÁÒÁÍÅÔÒÉ, ÔÁ˦, ÑË ÏÐÉÓ ÐÒÉÎÔÅÒÁ ÔÁ ÊÏÇÏ\n"
-#~ "ÒÏÚÔÁÛÕ×ÁÎÎÑ. ñËÕ ÎÁÚ×Õ ÔÁ ÄÉÒÅËÔÏÒ¦À ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ ÃØÏÇÏ\n"
-#~ "ÐÒÉÎÔÅÒÁ ÔÁ ÑË ÃÅÊ ÐÒÉÎÔÅÒ Ð¦ÄËÌÀÞÅÎÉÊ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "ëÏÖÎÅÎ ÐÒÉÎÔÅÒ ÐÏ×ÉÎÅÎ ÍÁÔÉ ÞÅÒÇÕ (ÎÁ ÑËÕ ÐÏÓÉÌÁÀÔØÓÑ ÒÏÂÏÔÉ ÄÒÕËÕ) ÔÁ\n"
-#~ "ÎÁÚ×Õ (ÞÁÓÔÏ lp) ÔÁ ÄÉÒÅËÔÏÒ¦À ÄÌÑ ÓÐÕ̦έÕ, ÑËÁ Ú ÎÉÍ Ú×'ÑÚÁÎÁ. ñËÕ\n"
-#~ "ÎÁÚ×Õ ÔÁ ÄÉÒÅËÔÏÒ¦À ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ ÃØÏÇÏ ÐÒÉÎÔÅÒÁ ÔÁ ÑË ÃÅÊ\n"
-#~ "ÐÒÉÎÔÅÒ Ð¦ÄËÌÀÞÅÎÉÊ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "îÁÚ×Á ÞÅÒÇÉ ÐÒÉÎÔÅÒÁ"
-
-#~ msgid "Spool directory"
-#~ msgstr "äÉÒÅËÔÏÒ¦Ñ ÓÐÕ̦έÕ"
-
-#~ msgid "Disable"
-#~ msgstr "÷ÉÍËÎÕÔÉ"
-
-#~ msgid "Enable"
-#~ msgstr "äÏÚ×ÏÌÉÔÉ"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "äÌÑ ÚÁÂÅÚÐÅÞÅÎÎÑ Â¦ÌØÛÏÇÏ Ò¦×ÎÑ ÂÅÚÐÅËÉ ÄÌÑ ÓÉÓÔÅÍÉ, ÷ÁÍ ÓÌ¦Ä ×ÉÂÒÁÔÉ\n"
-#~ "\"÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ô¦ÎØÏצ ÐÁÒÏ̦\" ÔÁ \"ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÐÁÒÏÌÑÍÉ MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ \"÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ NIS\", ÑËÝÏ Õ ÷ÁÛ¦Ê ÍÅÒÅÖ¦ NIS\n"
-#~ "×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ. ñËÝÏ ×É ÎÅ ÚÎÁ¤ÔÅ, ÓÐÉÔÁÊÔÅ Õ Ó×ÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ\n"
-#~ "ÍÅÒÅÖ¦."
-
-#~ msgid "yellow pages"
-#~ msgstr "ÖÏ×Ô¦ ÓÔÏÒ¦ÎËÉ"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "1Ê DNS ÐÒÏ×ÁÊÄÅÒÁ"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "2Ê DNS ÐÒÏ×ÁÊÄÅÒÁ"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "ñË ÷É ÈÏÞÅÔÅ Ú'¤ÄÎÁÔÉÓÑ Ú ¦ÎÔÅÒÎÅÔÏÍ?"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "ãÅÊ ÓÔÁÒÔÏ×ÉÊ ÓËÒÉÐÔ ÐÒÏÂÕ¤ ÚÁ×ÁÎÔÁÖÉÔÉ ÍÏÄÕ̦ ÄÌÑ USB ÍÉÛËÉ."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "ôÅÐÅÒ Ð¦ÓÌÑ ÔÏÇÏ, ÑË ÐÁÒÁÍÅÔÒÉ ÷ÁÛÏÇÏ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ\n"
-#~ "×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔÅ ÓËÏƦ­ÕÒÕ×ÁÔÉ Ó×¦Ê ËÏÍÐ'ÀÔÅÒ ÔÁËÉÍ ÞÉÎÏÍ, ÝÏÂ\n"
-#~ "צΠÄÏÚ×ÏÌÑ× ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ó×ÏÇÏ Ú'¤ÄÎÁÎÎÑ ÄÏ\n"
-#~ "¶ÎÔÅÒÎÅÔÕ. ðÒÉͦÔËÁ: ÷ÁÍ ÄÌÑ ÃØÏÇÏ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ÐÌÁÔÕ ÍÅÒÅÖ¦, ÝÏÂ\n"
-#~ "ÎÁÓÔÒϧÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN).\n"
-#~ "\n"
-#~ "þÉ ÈÏÞÅÔÅ ÷É ÎÁÓÔÒϧÔÉ ÓЦÌØÎÅ ×ÉËÏÒÉÓÔÁÎÎÑ Ú'¤ÄÎÁÎÎÑ Ú ¶ÎÔÅÒÎÅÔÏÍ?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "á×ÔÏÍÁÔÉÞΦ ÚÁÌÅÖÎÏÓÔ¦"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "îÁÓÔÒϧÔÉ LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "óÔ×ÏÒÉÔÉ ÄÉÓËÅÔÕ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ"
-
-#~ msgid "Choice"
-#~ msgstr "÷ɦÒ"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÄÅÑ˦ Ò¦ÚÎÏÐÌÁÎÏצ ÏÐæ§ ÄÌÑ Ó×Ϥ§ ÓÉÓÔÅÍÉ.\n"
-#~ "\n"
-#~ "  * ëÏÒÉÓÔÕ×ÁÔÉÓÑ ÏÐÔÉͦÚÁæ¤À ÖÏÒÓÔËÏÇÏ ÄÉÓËÕ: ãÑ ÏÐÃ¦Ñ ÍÏÖÅ\n"
-#~ "ÐÏËÒÁÝÉÔÉ Û×ÉÄ˦ÓÔØ ÒÏÂÏÔÉ ÄÉÓËÕ, ÁÌÅ ×ÏÎÁ - Ô¦ÌØËÉ ÄÌÑ ÄÏÓצÄÞÅÎÉÈ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÞ¦×. ÷É ÍÏÖÅÔÅ ÚÎÉÝÉÔÉ Ó×¦Ê ÄÉÓË, ÑËÝÏ ÂÕÄÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-#~ "ÎÅÀ ÎÅËÏÒÅËÔÎÏ. ÷ ÑÄÒ¦ ¦ÓÎÕ¤ Ó×¦Ê ÞÏÒÎÉÊ ÓÐÉÓÏË ÄÉÓË¦× ÔÁ ËÏÎÔÒÏÌÅÒ¦×,\n"
-#~ "Ñ˦ ÐÒÁÃÀÀÔØ ÎÅËÏÒÅËÔÎÏ, ÁÌÅ ÑËÝÏ ÷É ÈÏÞÅÔÅ ÐÏÚÂÕÔÉÓÑ ÎÅÐÒɤÍÎÉÈ\n"
-#~ "ÓÀÒÐÒÉÚ¦×, ÎÅ ËÏÒÉÓÔÕÊÔÅÓÑ ÃÉÍ.\n"
-#~ "\n"
-#~ "  * ÷ÉÂÒÁÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ: ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Ò¦×ÅÎØ ÂÅÚÐÅËÉ ÄÌÑ Ó×Ϥ§\n"
-#~ "ÓÉÓÔÅÍÉ. úÁ ¦ÎÆÏÒÍÁæ¤À Ú×ÅÒΦÔØÓÑ ÄÏ ËÅÒ¦×ÎÉÃÔ×Á. ÷ Ä×ÏÈ ÓÌÏ×ÁÈ: ÑËÝÏ\n"
-#~ "÷É ÎÅ ÒÏÚÕͦ¤ÔÅ ÐÒÏ ÝÏ ÊÄÅÔØÓÑ, ÎÅ ÚͦÎÀÊÔÅ ÓÔÁÎÄÁÒÔÎÅ ÚÎÁÞÅÎÎÑ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * ôÏÞÎÉÊ ÒÏÚÍ¦Ò ÐÁÍ'ÑÔ¦, ÑËÝÏ ÐÏÔÒ¦ÂÎÏ: îÁ ÖÁÌØ × ÓØÏÇÏÄΦÛÎØÏÍÕ\n"
-#~ "ÓצԦ PC ÎÅ ¦ÓÎÕ¤ ÓÔÁÎÄÁÒÔÎÏÇÏ ÓÐÏÓÏÂÕ Ä¦ÚÎÁÔÉÓÑ Ú BIOS ÐÒÏ ÔÏÞÎÉÊ\n"
-#~ "ÏÂ'¤Í ÐÁÍ'ÑÔ¦ × ÓÉÓÔÅͦ. ñË ÎÁÓ̦ÄÏË ÃØÏÇÏ, × ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ\n"
-#~ "GNU/ì¦ÎÁËÓ ÎÅ × ÚÍÏÚ¦ צÒÎÏ ×ÉÚÎÁÞÉÔÉ ×ÓÀ ×ÓÔÁÎÏ×ÌÅÎÏ × ÓÉÓÔÅͦ\n"
-#~ "ÐÁÍ'ÑÔØ (ÎÁ ÄÅÑËÉÈ ÓÉÓÔÅÍÁÈ). ñËÝÏ ÃÅ ÔÒÁÐÉÌÏÓØ Õ ÷ÁÛÏÍÕ ×ÉÐÁÄËÕ,\n"
-#~ "×ËÁÖ¦ÔØ ×¦ÒÎÉÈ ÏÂ'¤Í ÐÁÍ'ÑÔ¦. ÷¦ÄͦÔØÔÅ: Ò¦ÚÎÉÃÑ Õ 2-4 í - ÃÅ\n"
-#~ "ÎÏÒÍÁÌØÎÁ Ò¦Þ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * á×ÔÏÍÁÔÉÞÎÅ ÍÏÎÔÕ×ÁÎÎÑ ÚͦÎÎÉÈ ÎÏÓ¦§×: ñËÝÏ ÷ÁÍ ÐÏÄÏÂÁ¤ÔØÓÑ ÝÏÂ\n"
-#~ "ÚͦÎΦ ÎÏÓ¦§ (ÔÉÐÕ CDROM, ÄÉÓËÅÔ, ZIP) ÍÏÎÔÕ×ÁÌÉÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÚÁͦÓÔØ\n"
-#~ "ÔÏÇÏ, ÝÏ ÷ÁÍ ×ÒÕÞÎÏ ÄÒÕËÕ×ÁÔÉ ËÏÍÁÎÄÉ \"mount\" ÔÁ \"umount\", ×ÉÂÅÒ¦ÔØ\n"
-#~ "ÃÅÊ ÐÕÎËÔ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * óÔÉÒÁÔÉ \"/tmp\" ÐÒÉ ËÏÖÎÏÍÕ ÓÔÁÒÔ¦: ñËÝÏ ÷É ÈÏÞÅÔÅ, ÝÏ ×Ó¦ ÆÁÊÌÉ\n"
-#~ "ÔÁ ЦÄËÁÔÁÌÏÇÉ Õ ËÁÔÁÌÏÚ¦ \"/tmp\" ÓÔÉÒÁÌÉÓÑ Á×ÔÏÍÁÔÉÞÎÏ ÐÒÉ ËÏÖÎÏÍÕ\n"
-#~ "ÚÁ×ÁÎÔÁÖÅÎΦ ÓÉÓÔÅÍÉ, ×ÉÂÅÒ¦ÔØ ÃÅÊ ÐÁÒÁÍÅÔÒ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  * äÏÚ×ÏÌÉÔÉ NumLock ÐÒÉ ÓÔÁÒÔ¦: ñËÝÏ ÷É ÈÏÞÅÔÅ, ÝÏ ÷ÁÛ NumLock\n"
-#~ "Á×ÔÏÍÁÔÉÞÎÏ ×ÍÉËÁ×ÓÑ ÐÒÉ ÓÔÁÒÔ¦, ×ÉÂÅÒ¦ÔØ ÃÅÊ ÐÕÎËÔ (÷¦ÄͦÔØÔÅ, ÝÏ\n"
-#~ "NumLock ×ÓÅ ÏÄÎÏ ÎÅ ÂÕÄÅ ×ÍÉËÁÔÉÓÑ × X)."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "ò¦ÚÎÅ"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "ò¦ÚΦ ÚÁÐÉÔÁÎÎÑ"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "ðÒÉ ×ÉÓÏËÏÍÕ Ò¦×Φ ÂÅÚÐÅËÉ ÎÅ ÍÏÖÕ ËÏÒÉÓÔÕ×ÁÔÉÓÑ supermount"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Õ×ÁÇÁ: ÎÁ ÃØÏÍÕ Ò¦×Φ ÂÅÚÐÅËÉ òå´óôòáã¶ñ ÷ óéóôåí¶ îá ëïîóïì¶, ñë\n"
-#~ "ëïòéóôõ÷áþ ROOT îå äïú÷ïìåîá! ñËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÚÁÒŤÓÔÒÕ×ÁÔÉÓÑ ×\n"
-#~ "ÓÉÓÔÅͦ ÑË root, ÷É ÓÐÏÞÁÔËÕ ÍÁ¤ÔÅ ×צÊÔÉ × ÓÉÓÔÅÍÕ, ÑË Ú×ÉÞÁÊÎÉÊ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÞ, Á ÐÏÔ¦Í ÓËÏÒÉÓÔÕ×ÁÔÉÓÑ ËÏÍÁÎÄÏÀ \"su\". úÁÇÁÌÏÍ, ÎÅ ÞÅËÁÊÔÅ\n"
-#~ "×¦Ä Ó×Ϥ§ ÓÉÓÔÅÍÉ, ÝÏ ÷É ÚÍÏÖÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ §§ ÄÌÑ ÂÕÄØ-ÞÏÇÏ ËÒ¦Í\n"
-#~ "ÓÅÒ×ÅÒÁ.\n"
-#~ "\n"
-#~ "÷É ÐÏÐÅÒÅÄÖÅΦ."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "âÕÄØÔÅ Õ×ÁÖÎÉÍÉ, ÑËÝÏ ÷É ÄÏÚ×ÏÌÉÔÅ ×ÍÉËÎÅÎÎÑ numlock ÃÅ ÐÒÉÚ×ÅÄÅ ÄÏ\n"
-#~ "ÔÏÇÏ, ÝÏ ÂÁÇÁÔÏ Ñ˦ ËÌÁצۦ ÂÕÄÕÔØ ÄÒÕËÕ×ÁÔÉ ÃÉÆÒÉ ÚÁͦÓÔØ\n"
-#~ "̦ÔÅÒ. (ÔÁË, ÎÁÐÒÉËÌÁÄ, ÐÒÉ ÎÁÔÉÓËÁÎΦ `p' ÷É ÏÔÒÉÍÁ¤ÔÅ `6')"
-
-#~ msgid "First DNS Server"
-#~ msgstr "ðÅÒÛÉÊ ÓÅÒ×ÅÒ DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "äÒÕÇÉÊ ÓÅÒ×ÅÒ DNS"
-
-#~ msgid "loopback"
-#~ msgstr "Ú×ÏÒÏÔΤ ÍÏÎÔÕ×ÁÎÎÑ"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "ñËÉÊ ÚÁ×ÁÎÔÁÖÕ×ÁÞ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "á×ÔÏ ÕÓÔÁÎÏ×ÏÞÎÁ ÄÉÓËÅÔÁ"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "óÐÒÏÂÕ×ÁÔÉ ×¦ÄÛÕËÁÔÉ ÍÏÄÅÍ?"
-
-#~ msgid "Configure local network"
-#~ msgstr "îÁÓÔÒϧÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "ìÏËÁÌØÎÁ ÍÅÒÅÖÁ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÁ. \n"
-#~ "þÉ ÷É ÈÏÞÅÔÅ:"
-
-#~ msgid "Configure timezone"
-#~ msgstr "÷ÓÔÁÎÏ×ÉÔÉ ÞÁÓÏ×ÉÊ ÐÏÑÓ"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ÍÏÖÅ ×ÉÚ×ÁÔÉ ×ÔÒÁÔÕ ÄÁÎÉÈ)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "äÏÚ×ÏÌÉÔÉ numlock ÐÒÉ ÓÔÁÒÔ¦"
-
-#~ msgid "Confirm Password"
-#~ msgstr "ð¦ÄÔ×ÅÒÄÖÅÎÎÑ ÐÁÒÏÌÑ"
-
-#~ msgid "default"
-#~ msgstr "ÏÓÎÏ×ÎÉÊ"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "äÌÑ ÞÏÇÏ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÷ÁÛÁ ÓÉÓÔÅÍÁ?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ ÒÏÚͦÒ, ÑËÉÊ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "óÐÅæÁÌØÎÉÊ"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "÷É ÐÅ×Φ, ÝÏ ÷É ÅËÓÐÅÒÔ?\n"
-#~ "÷ÁÍ ÂÕÄÅ ÄÏÚ×ÏÌÅÎÏ ÒÏÂÉÔÉ ÓÅÒÊÏÚΦ ÁÌÅ ÎÅÂÅÚÐÅÞΦ ÒÅÞ¦.\n"
-#~ "\n"
-#~ "÷ÁÍ ÂÕÄÕÔØ ÚÁÄÁ×ÁÔÉÓÑ ÚÁÐÉÔÁÎÎÑ ÔÉÐÕ \"ëÏÒÉÓÔÕ×ÁÔÉÓÑ Ô¦ÎØÏ×ÉÍÉ\n"
-#~ "ÐÁÒÏÌÑÍÉ?\", ÷É Ä¦ÊÓÎÏ ÇÏÔÏצ ÄÏ ÔÁËÏÇÏ ÒÏÄÕ ÚÁÐÉÔÁÎØ?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ Ô¦ÎØÏצ ÐÁÒÏ̦"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "÷ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ MD5 ÐÁÒÏ̦"
-
-#~ msgid "Search"
-#~ msgstr "ðÏÛÕË"
-
-#~ msgid "Package"
-#~ msgstr "ðÁËÅÔ"
-
-#~ msgid "Tree"
-#~ msgstr "äÅÒÅ×Ï"
-
-#~ msgid "Sort by"
-#~ msgstr "óÏÒÔÕ×ÁÔÉ ÚÁ"
-
-#~ msgid "Category"
-#~ msgstr "ëÁÔÅÇÏÒ¦Ñ"
-
-#~ msgid "Installed packages"
-#~ msgstr "÷ÓÔÁÎÏ×ÌÅΦ ÐÁËÅÔÉ"
-
-#~ msgid "Available packages"
-#~ msgstr "÷Ó¦ ÐÁËÅÔÉ"
-
-#~ msgid "Show only leaves"
-#~ msgstr "ðÏËÁÚÁÔÉ Ô¦ÌØËÉ ÚͦÎÉ"
-
-#~ msgid "Expand all"
-#~ msgstr "òÏÚÛÉÒÉÔÉ ×ÓÅ"
-
-#~ msgid "Collapse all"
-#~ msgstr "úÇÏÒÎÕÔÉ ×ÓÅ"
-
-#~ msgid "Add location of packages"
-#~ msgstr "äÏÄÁÔÉ Í¦ÓÃÅÚÎÁÈÏÄÖÅÎÎÑ ÐÁËÅÔ¦×"
-
-#~ msgid "Update location"
-#~ msgstr "ïÂÎÏ×ÉÔÉ Í¦ÓÃÅÚÎÁÈÏÄÖÅÎÎÑ"
-
-#~ msgid "Find Package"
-#~ msgstr "úÎÁÊÔÉ ÐÁËÅÔÉ"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "ûÕËÁÔÉ ÐÁËÅÔ, ÝÏ Í¦ÓÔÉÔØ ÆÁÊÌ"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "ðÅÒÅÍËÎÕÔÉ Í¦Ö ÷ÓÔÁÎÏ×ÌÅÎÉÊ ÔÁ äÏÓÔÕÐÎÉÊ"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "ðÅÒÅצÒËÁ ÚÁÌÅÖÎÏÓÔÅÊ"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "㦠ÐÁËÅÔÉ ÂÕÄÕÔØ ÄŦÎÓÔÁÌØÏ×ÁÎÉÍÉ"
-
-#~ msgid "Regexp"
-#~ msgstr "òÅÇ. ×ÉÒÁÚ"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "ñËÉÊ ÐÁËÅÔ ÛÕËÁ¤ÔÅ"
-
-#~ msgid "No match"
-#~ msgstr "îÅצÄÐÏצÄΦÓÔØ"
-
-#~ msgid "No more match"
-#~ msgstr "îÅÍÁ¤ ÐÏÔÒ¦ÂÎÉÈ"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake ÚÁÒÁÚ ÚÎÁÈÏÄÉÔØÓÑ × ÒÅÖÉͦ ``ËÏÒÏÔËϧ ÐÁÍ'ÑÔ¦''.\n"
-#~ "ñ ÚÂÉÒÁÀÓØ ÐÅÒÅÚÁÐÕÓÔÉÔÉ rpmdrake, ÝÏ ÄÏÚ×ÏÌÉÔÉ ÐÏÛÕË ÆÁÊ̦×."
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "ñËÉÊ ÆÁÊÌ ÷É ÛÕËÁ¤ÔÅ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "ýÏ ÷É ÛÕËÁ¤ÔÅ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "äÁÊÔÅ ÎÁÚ×Õ (ÑË: `ÅËÓÔÒÁ', `ËÏÍÅÒæÊÎÉÊ')"
-
-#~ msgid "Directory"
-#~ msgstr "äÉÒÅËÔÏÒ¦Ñ"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "îÅÍÁ¤ ËÏÍÐÁËÔ-ÄÉÓËÕ (ÎÅÍÁ¤ ΦÞÏÇÏ × /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL ÄÉÒÅËÔÏÒ¦§, ÝÏ Í¦ÓÔÑÔØ RPM"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "äÌÑ FTP ÔÁ HTTP ÷É ÐÏ×ÉÎΦ ÚÁÄÁÔÉ Í¦ÓÃÅÐÏÌÏÖÅÎÎÑ hdlist\n"
-#~ "÷ÏÎÏ ÐÏ×ÉÎÎÏ ×ËÁÚÕ×ÁÔÉÓØ ×¦ÄÎÏÓÎÏ URL ÎÁ×ÅÄÅÎÏÇÏ ×ÉÝÅ"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "âÕÄØ-ÌÁÓËÁ, ÎÁÄÁÊÔÅ ÔÁËÕ ¦ÎÆÏÒÍÁæÀ"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ×ÖÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "ïÂÎÏ×ÌÀÀ ÂÁÚÕ RPM"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "óÔÉÒÁÀ ÐÕÎËÔ %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "úÎÁÈÏÄÖÕ ÓÔÅÒÔ¦"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "úÎÁÈÏÄÖÅÎÎÑ ÓÔÅÒÔÉÈ ÍÏÖÅ ÚÁÊÎÑÔÉ ÄÅÑËÉÊ ÞÁÓ"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "úÎÁÊÄÅÎÁ ÐÌÁÔÁ ISDN:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "¶ÎÛ¦ ËÒÁ§ÎÉ"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "÷ ÑË¦Ê ËÒÁ§Î¦ ÷É ÚÎÁÈÏÄÉÔÅÓØ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "íÏÄÅÍ Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "íÏÄÅÍ ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "ñËÝÏ ÷ÁÛ ÍÏÄÅÍ adls ÔÉÐÕ Alctel, ×ÉÂÅÒ¦ÔØ  Alcatel. ñËÝÏ Î¦ - ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ÎÅ ×ÖÉ×ÁÔÉ pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (×ÁÖÌÉ×ÉÊ)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (ÄÕÖÅ ÇÁÒÎÉÊ)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (ÇÁÒÎÉÊ)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "äÏ ÑËÏÇÏ ÐÏÓ̦ÄÏ×ÎÏÇÏ ÐÏÒÔÕ ÐÒɤÄÎÁÎÏ ÍÉÛÕ?"
-
-#~ msgid "Czech"
-#~ msgstr "þÅÓØËÁ"
-
-#~ msgid "Slovakian"
-#~ msgstr "óÌÏ×ÁÃØËÁ"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and  \n"
-#~ "MandrakeSoft S.A., 42, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License,  you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities.  Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer,  duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A.  All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of  the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of  downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites  which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A.,  \n"
-#~ "42, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ "÷ÓÔÕÐ\n"
-#~ "\n"
-#~ "ïÐÅÒÁæÊÎÁ ÓÉÓÔÅÍÁ ÔÁ Ò¦ÚÎÏÍÁΦÔΦ ÓËÌÁÄÏצ ËÏÍÐÏÎÅÎÔÉ × ÄÉÓÔÒÉÂÕÔÉצ\n"
-#~ "íÁÎÄÒÅÊË ì¦ÎÁËÓÁ ÄÁ̦ ÂÕÄÕÔØ Ú×ÁÔÉÓÑ \"ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ \". ðÒÏÇÒÁÍΦ\n"
-#~ "ÐÒÏÄÕËÔÉ ×ËÌÀÞÁÀÔØ ÁÌÅ ÎÅ ÏÂÍÅÖÕÀÔØÓÑ ÎÁÂÏÒÁÍÉ ÐÒÏÇÒÁÍ, ÍÅÔÏĦ×,\n"
-#~ "ÐÒÁ×ÉÌ ÔÁ ÄÏËÕÍÅÎÔÁæ¤À, Ñ˦ ÍÁÀÔØ ×¦ÄÎÏÛÅÎÎÑ ÄÏ ÏÐÅÒÁæÊÎϧ ÓÉÓÔÅÍÉ\n"
-#~ "ÔÁ Ò¦ÚÎÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ ÄÉÓÔÒÉÂÕÔÉ×Á íÁÎÄÒÅÊË ì¦ÎÁËÓ.\n"
-#~ "\n"
-#~ "1. ì¦ÃÅÎÚ¦ÊÎÁ ÚÇÏÄÁ\n"
-#~ "\n"
-#~ "ðÒÏÞÉÔÁÊÔÅ, ÂÕÄØ-ÌÁÓËÁ, Õ×ÁÖÎÏ ÃÅÊ ÄÏËÕÍÅÎÔ. ãÅÊ ÄÏËÕÍÅÎÔ - ÚÇÏÄÁ ÐÒÏ\n"
-#~ "̦ÃÅÎÚÕ×ÁÎÎÑ Í¦Ö ÷ÁÍÉ ÔÁ ËÏÍÐÁΦ¤À MandrakeSoft S.A., 42, rue\n"
-#~ "d'Aboukir, 75002 Paris - France, ÑËÁ ÚÁÓÔÏÓÏ×Õ¤ÔØÓÑ ÄÏ ðÒÏÇÒÁÍÎÉÈ\n"
-#~ "ÐÒÏÄÕËÔ¦×. ÷ÓÔÁÎÏ×ÌÀÀÞÉ, ÄÕÂÌÀÀÞÉ ÞÉ ×ÉËÏÒÉÓÔÏ×ÕÀÞÉ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ\n"
-#~ "ÂÕÄØ-ÑËÉÍ ÞÉÎÏÍ ÷É ÔÉÍ ÓÁÍÉÍ Ñ×ÎÉÍ ÞÉÎÏÍ ÐÒÉÊÍÁ¤ÔÅ ÔÁ ÐÏ×ΦÓÔÀ\n"
-#~ "ÐÏÇÏÄÖÕ¤ÔÅÓØ ÐÒÉÔÒÉÍÕ×ÁÔÉÓØ ÕÍÏ× ÄÁÎϧ ì¦ÃÅÎÚ¦§. ñËÝÏ ÷É ÎÅ\n"
-#~ "ÐÏÇÏÄÖÕ¤ÔÅÓØ Ú ÂÕÄØ-ÑËÉÍ ÐÏÌÏÖÅÎÎÑÍ Ã¦¤§ ì¦ÃÅÎÚ¦§, ÷ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ\n"
-#~ "×ÓÔÁÎÏ×ÌÀ×ÁÔÉ, ÄÕÂÌÀ×ÁÔÉ ÞÉ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ðÒÏÇÒÁÍΦ\n"
-#~ "ÐÒÏÄÕËÔÉ. âÕÄØ-ÑËÁ ÓÐÒÏÂÁ ×ÓÔÁÎÏ×ÉÔÉ, ÄÕÂÌÀ×ÁÔÉ ÞÉ ×ÉËÏÒÉÓÔÁÔÉ\n"
-#~ "ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÞÉÎÏÍ, ÑËÉÊ ÎÅ ÐÅÒÅÄÂÁÞÅÎÉÊ ÕÍÏ×ÁÍÉ Ã¦¤§ ì¦ÃÅÎÚ¦§\n"
-#~ "×ÅÄÅ ÄÏ ×ÔÒÁÔÉ ÐÒÁ× ÝÏÄÏ Ã¦¤§ ì¦ÃÅÎÚ¦§. ðÒÉ ÐÒÉÐÉÎÅÎΦ ì¦ÃÅÎÚ¦§ ÷É\n"
-#~ "ÐÏ×ÉÎΦ צÄÒÁÚÕ-Ö ÚÎÉÝÉÔÉ ×Ó¦ ËÏЦ§ ðÒÏÇÒÁÍÎÏÇÏ ÐÒÏÄÕËÔÕ.\n"
-#~ "\n"
-#~ "2. ì¦ÃÅÎÚ¦Ñ GPL ÔÁ ¦ÎÛ¦ ÐÏĦÂΦ ̦ÃÅÎÚ¦§\n"
-#~ "\n"
-#~ "ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÓËÌÁÄÁÀÔØÓÑ Ú ËÏÍÐÏÎÅÎÔ¦×, Ñ˦ ÒÏÚÒÏÂÌÅΦ Ò¦ÚÎÉÍÉ\n"
-#~ "ÏÓÏÂÁÍÉ ÞÉ ÏÒÇÁΦÚÁæÑÍÉ. â¦ÌØÛ¦ÓÔØ ÃÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ ÒÅÇÕÌÀÀÔØÓÑ\n"
-#~ "ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ úÁÇÁÌØÎϧ ðÕÂ̦ÞÎϧ ì¦ÃÅÎÚ¦§ GNU (GNU General\n"
-#~ "Public Licence), ÑËÁ ÄÁ̦ × ÃØÏÍÕ ÔÅËÓÔ¦ Ú×ÅÔØÓÑ \"GPL\", ÁÂÏ ¦ÎÛÉÍÉ\n"
-#~ "ÐÏĦÂÎÉÍÉ Ì¦ÃÅÎÚ¦ÑÍÉ. â¦ÌØÛ¦ÓÔØ Ú ÃÉÈ Ì¦ÃÅÎÚ¦Ê ÄÏÚ×ÏÌÑÀÔØ\n"
-#~ "×ÉËÏÒÉÓÔÁÎÎÑ, ÄÕÂÌÀ×ÁÎÎÑ, ÐÒÉÊÎÑÔÔÑ ÔÁ ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ ÓËÌÁÄÏ×ÉÈ\n"
-#~ "ÞÁÓÔÉÎ, Ñ˦ ×ÏÎÉ ÒÅÇÕÌÀÀÔØ. âÕÄØ-ÌÁÓËÁ, ÏÚÎÁÊÏÍÔÅÓØ Õ×ÁÖÎÏ Ú ÔÅÒͦÎÁÍÉ\n"
-#~ "ÔÁ ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦ÊÎÉÈ ÕÍÏ× ÄÌÑ ËÏÖÎϧ ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ ÐÅÒÛ, ΦÖ\n"
-#~ "×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÂÕÄØ-ÑËÕ Ú ÞÁÓÔÉÎ. âÕÄØ-Ñ˦ ÚÁÐÉÔÁÎÎÑ ÓÔÏÓÏ×ÎÏ\n"
-#~ "̦ÃÅÎÚ¦§ ÎÁ ÏËÒÅÍÕ ÓËÌÁÄÏ×Õ ÞÁÓÔÉÎÕ ÍÁÀÔØ ÁÄÒÅÓÕ×ÁÔÉÓÑ Á×ÔÏÒÕ Ã¦¤§\n"
-#~ "ÓËÌÁÄÏ×ϧ ÞÁÓÔÉÎÉ, Á ÎÅ ÄÏ MandrakeSoft. ðÒÏÇÒÁÍÉ, ÒÏÚÒÏÂÌÅΦ\n"
-#~ "MandrakeSoft S.A. ËÅÒÕÀÔØÓÑ Ì¦ÃÅÎÚ¦¤À GPL. äÏËÕÍÅÎÔÁæÑ, ÒÏÚÒÏÂÌÅÎÁ\n"
-#~ "MandrakeSoft S.A. ËÅÒÕ¤ÔØÓÑ ÓÐÅæÁÌØÎÏÀ ̦ÃÅÎÚ¦¤À. ú×ÅÒΦÔØÓÑ,\n"
-#~ "ÂÕÄØ-ÌÁÓËÁ, ÄÏ ÄÏËÕÍÅÎÔÁæ§ ÚÁ ÄÏÄÁÔËÏ×ÉÍÉ ÐÏÄÒÏÂÉÃÑÍÉ. äÅÑ˦ ×ÅÒÓ¦§\n"
-#~ "ÐÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦× ÍÏÖÕÔØ Í¦ÓÔÉÔÉ ÓËÌÁÄÏצ, Ñ˦ ÎÅ ËÅÒÕÀÔØÓÑ\n"
-#~ "ì¦ÃÅÎÚ¦¤À GPL ÞÉ ÐÏĦÂÎÉÍÉ ÕÇÏÄÁÍÉ. ëÏÖÎÁ ÔÁËÁ ÓËÌÁÄÏ×Á ÞÁÓÔÉÎÁ\n"
-#~ "ËÅÒÕ¤ÔØÓÑ ÔÅÒͦÎÁÍÉ ÔÁ ÕÍÏ×ÁÍÉ Ó×Ϥ§ ÓÐÅÃÉƦÞÎϧ ̦ÃÅÎÚ¦§. âÕÄØ-ÌÁÓËÁ,\n"
-#~ "Õ×ÁÖÎÏ ÐÒÏÞÉÔÁÊÔÅ ÔÁ ÄÏÔÒÉÍÕÊÔÅÓØ ÕÍÏ× ÔÁËϧ ÓÐÅÃÉƦÞÎϧ ÕÇÏÄÉ ÐÅÒÛ,\n"
-#~ "Î¦Ö ÕÓÔÁÎÏ×ÌÀ×ÁÔÉ, ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÞÉ ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÕ×ÁÔÉ ÔÁ˦\n"
-#~ "ËÏÍÐÏÎÅÎÔÉ. úÁÇÁÌÏÍ ÔÁ˦ ̦ÃÅÎÚ¦§ ÂÕÄÕÔØ ÚÁÐÅÒÅÞÕ×ÁÔÉ ÐÒÁ×Ï ÐÅÒÅÎÏÓÕ,\n"
-#~ "ÄÕÂÌÀ×ÁÎÎÑ (ËÒ¦Í ÑË Ú ÍÅÔÏÀ ÓÔ×ÏÒÅÎÎÑ ÒÅÚÅÒ×Îϧ ËÏЦ§),\n"
-#~ "ÐÅÒÅÒÏÚÐÏ×ÓÀÄÖÅÎÎÑ, Ú×ÏÒÏÔÎÀ ¦ÎÖÅÎÅÒ¦À, ÄÅ-ÁÓÅÍÂÌÀ×ÁÎÎÑ, ÄÅ-ËÏÍЦÌÑæÀ\n"
-#~ "ÞÉ ÚͦÎÕ ÔÁËÏÇÏ ËÏÍÐÏÎÅÎÔÁ. âÕÄØ-ÑËÅ ÐÏÒÕÛÅÎÎÑ ÕÍÏ× Ì¦ÃÅÎÚ¦§ ÐÏÚÂÁ×ÌѤ\n"
-#~ "÷ÁÓ ÐÒÁ× ÚÁ ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦§. ëÒ¦Í ×ÉÐÁÄ˦×, ÓÐÅæÁÌØÎÏ ×ËÁÚÁÎÉÈ\n"
-#~ "ÕÍÏ×ÁÍÉ Ì¦ÃÅÎÚ¦§, ÷ÁÍ ÎÅ ÄÏÚ×ÏÌѤÔØÓÑ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÐÒÏÇÒÁÍÉ ÎÁ\n"
-#~ "¦ÌØÛÅ, Î¦Ö ÏÄÎ¦Ê ÓÉÓÔÅͦ, ÁÂÏ ×ÓÔÁÎÏ×ÌÀ×ÁÔÉ §§ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ ×\n"
-#~ "ÍÅÒÅÖ¦. ñËÝÏ ÷É ÓÕÍΦ×Á¤ÔÅÓØ ÝÏÄÏ ÔÅÒͦΦ×, ÂÕÄØ-ÌÁÓËÁ, Ú×ÅÒΦÔØÓÑ\n"
-#~ "ÂÅÚÐÏÓÅÒÅÄÎØÏ ÄÏ ÄÉÓÔÒÉÂÀÔÏÒÁ ÞÉ ÒÅÄÁËÔÏÒÁ ËÏÍÐÏÎÅÎÔÉ. ðÅÒÅÎ¦Ó ÄÏ\n"
-#~ "ÔÒÅÔ¦È ÐÁÒÔ¦Ê ÞÉ ËÏЦÀ×ÁÎÎÑ ÔÁËÉÈ ËÏÍÐÏÎÅÎÔ, Ú ÄÏËÕÍÅÎÔÁæ¤À ×ËÌÀÞÎÏ\n"
-#~ "Ú×ÉÞÁÊÎÏ ÚÁÂÏÒÏÎÅÎÏ.\n"
-#~ "\n"
-#~ "3. ðÒÁ×Á ¦ÎÔÅÌÅËÔÕÁÌØÎϧ ×ÌÁÓÎÏÓÔ¦\n"
-#~ "\n"
-#~ "÷Ó¦ ÐÒÁ×Á ÎÁ ÓËÌÁÄÏצ ËÏÍÐÏÎÅÎÔÉ ðÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦× ÎÁÌÅÖÁÔØ\n"
-#~ "צÄÐÏצÄÎÉÍ Á×ÔÏÒÁÍ ¦ ÚÁÈÉÝÅΦ ÚÁËÏÎÁÍÉ ÐÒÏ ¦ÎÔÅÌÅËÔÕÁÌØÎÕ ×ÌÁÓΦÓÔØ\n"
-#~ "ÔÁ ÐÒÁ×Á ÎÁ ËÏЦÀ×ÁÎÎÑ, Ñ˦ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ ÄÏ ÐÒÏÇÒÁÍÎÏÇÏ\n"
-#~ "ÚÁÂÅÚÐÅÞÅÎÎÑ. MandrakeSoft S.A. ÚÁÌÉÛÁ¤ ÚÁ ÓÏÂÏÀ ÐÒÁ×Ï ÚͦÎÀ×ÁÔÉ ÞÉ\n"
-#~ "ÁÄÁÐÔÕ×ÁÔÉ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÑË × Ã¦ÌÏÍÕ, ÔÁË ¦ ÏËÒÅÍÉÍÉ ÞÁÓÔÉÎÁÍÉ Ú\n"
-#~ "ÂÕÄØ-ÑËÏÀ ÍÅÔÏÀ ¦ ÄÌÑ ÂÕÄØ-ÑËÉÈ Ã¦ÌÅÊ. \"Mandrake\", \"Mandrake Linux\" "
-#~ "ÔÁ\n"
-#~ "צÄÐÏצÄΦ ÌÏÇÏÔÉÐÉ ¤ ÔÏÒǦ×ÅÌØÎÉÍÉ ÍÁÒËÁÍÉ MandarakeSoft\n"
-#~ "S.A. äÕÂÌÀ×ÁÎÎÑ ÚÁÂÏÒÏÎÅÎÏ ÂÅÚ ÐÏÐÅÒÅÄÎØϧ ÐÉÓØÍÏ×ϧ ÕÇÏÄÉ Ú\n"
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "4. ïÂÍÅÖÅÎÁ צÄÐÏצÄÁÌØΦÓÔØ\n"
-#~ "\n"
-#~ "ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ÔÁ ÄÏÄÁÎÁ ÄÏËÕÍÅÎÔÁÃ¦Ñ ÎÁÄÁÀÔØÓÑ ÎÁ ÕÍÏ×ÁÈ \"ÑË ¤\",\n"
-#~ "ÂÅÚ ÇÁÒÁÎÔ¦Ê, ÏÂÍÅÖÕÀÞÉÓØ ×¦ÄÐÏצÄÎÉÍÉ ÚÁËÏÎÁÍÉ. õ ×ÉÐÁÄËÕ, ËÏÌÉ\n"
-#~ "ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ ×ÉÑ×ÌÑÔØÓÑ ÄÅÆÅËÔÎÉÍÉ, MandrakeSoft S.A. ×ÌÁÓÎÉÍ\n"
-#~ "ËÏÛÔÏÍ ÁÂÏ ÚÁͦÎÉÔØ ðÒÏÇÒÁÍΦ ÐÒÏÄÕËÔÉ, ÁÂÏ ×¦ÄÛËÏÄÕ¤ §È ×ÁÒÔ¦ÓÔØ. ãÑ\n"
-#~ "ÏÂÍÅÖÅÎÁ צÄÐÏצÄÁÌØΦÓÔØ ÐÅÒÅÓÔÁ¤ ĦÑÔÉ × ÒÁÚ¦, ËÏÌÉ ÷É ÎÅ\n"
-#~ "ÄÏÔÒÉÍÕ¤ÔÅÓØ ÒÅËÏÍÅÎÄÁæÊ, ¦ÎÓÔÒÕËÃ¦Ê ÞÉ ÕÍÏ× ×ÉËÏÒÉÓÔÁÎÎÑ ÐÅÒÅ̦ÞÅÎÉÈ\n"
-#~ "× ÄÏËÕÍÅÎÔÁæ§ ÔÁ ÕÍÏצ ̦ÃÅÎÚÕ×ÁÎÎÑ ðÒÏÇÒÁÍÎÉÈ ÐÒÏÄÕËÔ¦×. ÷ ÍÅÖÁÈ,\n"
-#~ "Ñ˦ ÄÏÚ×ÏÌѤ ÚÁËÏÎÏÄÁ×ÓÔ×Ï, MandrakeSoft S.A. Φ ÚÁ ÑËÉÈ ÕÍÏ× ÎÅ\n"
-#~ "ÐÒÉÊÍÁ¤ ÎÁ ÓÅŠצÄÐÏצÄÁÌØÎÏÓÔ¦ ÚÁ ÓÐÅæÁÌØΦ, ×ÉÐÁÄËÏצ, ÐÒÑͦ ÞÉ\n"
-#~ "ÏÐÏÓÅÒÅÄËÏ×ÁΦ ×ÔÒÁÔÉ (×ËÌÀÞÁÀÞÉ ×ÔÒÁÔÕ Â¦ÚÎÅÓÕ, ÐÅÒÅÒ×É Â¦ÚÎÅÓÕ,\n"
-#~ "ƦÎÁÎÓÏצ ×ÔÒÁÔÉ, ÓÕÄÏצ ×ÉÔÒÁÔÉ ÔÁ ÛÔÒÁÆÉ, Ñ˦ ¤ ÒÅÚÕÌØÔÁÔÁÍÉ\n"
-#~ "ÂÕÄØ-ÑËÉÈ ÓÕÄÏ×ÉÈ ÒÏÚÇÌÑĦ×, ÞÉ ÂÕÄØ-Ñ˦ ×ÔÒÁÔÉ, ÝÏ ×¦Ä ÎÉÈ ÐÏÈÏÄÑÔØ),\n"
-#~ "Ñ˦ ×ÉËÌÉËÁΦ ×ÉËÏÒÉÓÔÁÎÎÑÍ ÞÉ ÎÅÍÏÖÌÉצÓÔÀ ×ÉËÏÒÉÓÔÁÎÎÑ ðÒÏÇÒÁÍÎÉÈ\n"
-#~ "ÐÒÏÄÕËÔ¦×, ÎÁצÔØ ÑËÝÏ MandrakeSoft S.A. ÂÕ× ÐÏÐÅÒÅÄÎØÏ ÐÏצÄÏÍÌÅÎÉÊ\n"
-#~ "ÐÒÏ ÍÏÖÌÉצÓÔØ ÔÁËÉÈ ×ÔÒÁÔ.\n"
-#~ "\n"
-#~ "ïâíåöåîá ÷¶äðï÷¶äïáìøî¶óôø ú÷'ñúáîá ú ÷ïìïä¶îîñí þé ÷éëïòéóôáîîñí\n"
-#~ "úáâïòïîåîïçï ðòïçòáíîïçï úáâåúðåþåîîñ ÷ äåñëéè ëòá·îáè\n"
-#~ "\n"
-#~ "÷ ÍÅÖÁÈ, Ñ˦ ÄÏÚ×ÏÌѤ ÚÁËÏÎÏÄÁ×ÓÔ×Ï, MandrakeSoft S.A. ÞÉ ÊÏÇÏ\n"
-#~ "ÄÉÓÔÒÉÂÀÔÏÒÉ Î¦ ÚÁ ÑËÉÈ ÕÍÏ× ÎÅ ÐÒÉÊÍÁ¤ ÎÁ ÓÅŠצÄÐÏצÄÁÌØÎÏÓÔ¦ ÚÁ\n"
-#~ "ÓÐÅæÁÌØΦ, ×ÉÐÁÄËÏצ, ÐÒÑͦ ÞÉ ÏÐÏÓÅÒÅÄËÏ×ÁΦ ×ÔÒÁÔÉ (×ËÌÀÞÁÀÞÉ\n"
-#~ "×ÔÒÁÔÕ Â¦ÚÎÅÓÕ, ÐÅÒÅÒ×É Â¦ÚÎÅÓÕ, ƦÎÁÎÓÏצ ×ÔÒÁÔÉ, ÓÕÄÏצ ×ÉÔÒÁÔÉ ÔÁ\n"
-#~ "ÛÔÒÁÆÉ, Ñ˦ ¤ ÒÅÚÕÌØÔÁÔÁÍÉ ÂÕÄØ-ÑËÉÈ ÓÕÄÏ×ÉÈ ÒÏÚÇÌÑĦ×, ÞÉ ÂÕÄØ-Ñ˦\n"
-#~ "×ÔÒÁÔÉ, ÝÏ ×¦Ä ÎÉÈ ÐÏÈÏÄÑÔØ), Ñ˦ ×ÉËÌÉËÁΦ ×ÏÌÏĦÎÎÑÍ ÔÁ ×ËÏÒÉÓÔÁÎÎÑÍ\n"
-#~ "ÐÒÏÇÒÁÍÎÉÈ ÓËÌÁÄÏ×ÉÈ ÞÁÓÔÉÎ, ÞÉ ×ÉËÌÉËÁΦ ÚÁ×ÁÎÔÁÖÅÎÎÑÍ ÐÒÏÇÒÁÍÎÉÈ\n"
-#~ "ËÏÍÐÏÎÅÎÔ Ú ÏÄÎÏÇÏ Ú ÓÁÊÔ¦× Mandrake Linux, Ñ˦ ÚÁÂÏÒÏÎÅΦ ÞÉ ÏÂÍÅÖÅΦ\n"
-#~ "× ×ÉËÏÒÉÓÔÁÎΦ × ÄÅÑËÉÈ ËÒÁ§ÎÁÈ Í¦ÓÃÅ×ÉÍ ÚÁËÏÎÏÄÁ×ÓÔ×ÏÍ. ãÅ ÏÂÍÅÖÅÎÁ\n"
-#~ "צÄÐÏצÄÁÌØΦÓÔØ ÚÁÓÔÏÓÏ×Õ¤ÔØÓÑ ÁÌÅ ÎÅ ÏÂÍÅÖÕ¤ÔØÓÑ ÓÉÌØÎÉÍÉ\n"
-#~ "ËÒÉÐÔÏÇÒÁƦÞÎÉÍÉ ÓÉÓÔÅÍÁÍÉ, Ñ˦ ×ËÌÀÞÅΦ × ÓËÌÁÄ ðÒÏÇÒÁÍÎÉÈ\n"
-#~ "ÐÒÏÄÕËÔ¦×.\n"
-#~ "\n"
-#~ "5. úÁËÏÎÏÄÁ×ÓÔ×Ï\n"
-#~ "\n"
-#~ "ñËÝÏ ÂÕÄØ-ÑËÉÊ ÒÏÚÄ¦Ì Ã¦¤§ ÕÇÏÄÉ ÐÒÉÚÎÁÎÉÊ ÎÅĦÊÓÎÉÍ, ÔÁËÉÍ, ÝÏ ÎÅ\n"
-#~ "צÄÐÏצÄÁ¤ ÚÁËÏÎÏÄÁ×ÓÔ×Õ ÞÉ ÎÅצÄÐÏצÄÎÉÍ ÝÏÄÏ ÓÕÄÏ×ϧ ÐÏÓÔÁÎÏ×É, ÃÅÊ\n"
-#~ "ÒÏÚÄ¦Ì ÕÇÏÄÉ ×ÉÄÁÌѤÔØÓÑ Ú ÄÁÎÏÇÏ ËÏÎÔÒÁËÔÕ. ÷É ÚÁÌÉÛÁ¤ÔÅÓØ Ú×'ÑÚÁÎÉÍÉ\n"
-#~ "¦ÎÛÉÍÉ ÓÅËæÑÍÉ Ã¦¤§ ÕÇÏÄÉ, Ñ˦ ÝÅ ÍÁÀÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ. ôÅÒͦÎÉ ÔÁ\n"
-#~ "ÕÍÏ×É Ã¦¤§ ì¦ÃÅÎÚ¦§ ËÅÒÕÀÔØÓÑ úÁËÏÎÏÄÁ×ÓÔ×ÏÍ æÒÁÎæ§. ÷Ó¦ ÓЦÒΦ\n"
-#~ "ÐÉÔÁÎÎÑ ÝÏÄÏ ÔÅÒÍ¦Î¦× ÔÁ ÕÍÏ× Ã¦¤§ ̦ÃÅÎÚ¦§ ÂÕÄÕÔØ ÒÏÚ×'ÑÚÕ×ÁÔÉÓÑ ÐÏ\n"
-#~ "ÍÏÖÌÉ×ÏÓÔ¦ ÐÏÚÁ ÍÅÖÁÍÉ ÓÕÄÏ×ÉÈ ÕÓÔÁÎÏ×. ÷ ËÒÁÊÎ¦È ×ÉÐÁÄËÁÈ ÓЦÒΦ\n"
-#~ "ÐÉÔÁÎÎÑ ÂÕÄÕÔØ ×ÉÒ¦ÛÕ×ÁÔÉÓÑ ×¦ÄÐÏצÄÎÉÍ úÁËÏÎÎÉÍ óÕÄÏÍ ðÁÒÉÖÁ -\n"
-#~ "æÒÁÎæÑ.  \n"
-#~ "ú ÂÕÄØ-ÑËÉÍÉ ÐÉÔÁÎÎÑÍÉ ÝÏÄÏ ÃØÏÇÏ ÄÏËÕÍÅÎÔÁ Ú×ÅÒÔÁÊÔÅÓÑ, ÂÕÄØ-ÌÁÓËÁ,\n"
-#~ "ÄÏ MandrakeSoft S.A., 42, rue d'Aboukir, 75002 Paris - France\n"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "þÁÓ (× ÓÅË) ÎÅÁËÔÉ×ÎÏÓÔ¦, ЦÓÌÑ ÑËϧ\n"
-#~ "צÛÁ¤ÔØÓÑ ÔÒÕÂËÁ. (ÚÁÌÉÛÔÅ ÐÕÓÔÉÍ ÝÏ \n"
-#~ "ÚÁÂÏÒÏÎÉÔÉ ÃÅÊ ÒÅÖÉÍ)"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "î¦ÍÅÞÞÉÎÁ (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "ýÏ ÷É ÈÏÞÅÔÅ ÚÒÏÂÉÔÉ?"
-
-#~ msgid "Connect to internet with a normal modem"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ Ú×ÉÞÁÊÎÉÊ ÍÏÄÅÍ"
-
-#~ msgid "Connect to internet using ISDN"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ ISDN"
-
-#~ msgid "Connect to internet using DSL (or ADSL)"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ DSL (ÁÂÏ ADSL)"
-
-#~ msgid "Connect to internet using Cable"
-#~ msgstr "ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ ËÁÂÅÌØÎÅ Ú'¤ÄÎÁÎÎÑ"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "óÔ×ÏÒÉÔÉ ÎÏ×Õ ËÏÎƦÇÕÒÁæÀ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "÷ÁÛ ËÏÍÐ'ÀÔÅÒ ÍÏÖÎÁ ÎÁÓÔÒϧÔÉ ÄÌÑ ÓЦÌØÎÏÇÏ ËÏÒÉÓÔÕ×ÁÎÎÑ Ú'¤ÄÎÁÎÎÑÍ Ú "
-#~ "¦ÎÔÅÒÎÅÔÏÍ.\n"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ ipchains ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ dhcp ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ linuxconf ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ bind ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "îÅ ÍÏÖÕ ×ÓÔÁÎÏ×ÉÔÉ RPM ÄÌÑ cahing-nameserver ÚÁ ÄÏÐÏÍÏÇÏÀ urpmi."
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "÷ÓÅ ÂÕÌÏ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ.\n"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "õÓÔÁÎÏ×ËÁ/÷¦ÄÎÏ×ÌÅÎÎÑ"
-
-#~ msgid "Rescue"
-#~ msgstr "÷¦ÄÎÏ×ÌÅÎÎÑ"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "ñËÉÊ ÔÉРЦÄÒÏÚĦÌÕ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "ñËÝÏ ÒÁΦÛÅ ÎÅ ÂÕÌÏ ×ÓÔÁÎÏ×ÌÅÎÏ ÖÏÄÎϧ ÓÉÓÔÅÍÉ Ú GNU/ì¦ÎÁËÓÏÍ ÁÂÏ ÑËÝÏ\n"
-#~ "÷É ÈÏÞÅÔÅ ÍÁÔÉ Ë¦ÌØËÁ Ò¦ÚÎÉÈ ×ÅÒÓ¦Ê ì¦ÎÁËÓÁ ×ÉÂÅÒ¦ÔØ \"õÓÔÁÎÏ×ËÁ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "÷ÉÂÅÒ¦ÔØ \"÷¦ÄÎÏ×ÌÅÎÎÑ\" ÑËÝÏ ÷É ÈÏÞÅÔŠצÄÎÏ×ÉÔÉ ×ÅÒÓ¦À íÁÎÄÒÅÊË\n"
-#~ "ì¦ÎÁËÓÁ, ÑËÁ ÂÕÌÁ ×ÖÅ ×ÓÔÁÎÏ×ÌÅÎÁ.\n"
-#~ "\n"
-#~ "÷ÉÂÅÒ¦ÔØ:\n"
-#~ "\n"
-#~ "  - òÅËÏÍÅÎÄÏ×ÁÎÉÊ: ñËÝÏ ÷É Î¦ËÏÌÉ ÄÏ ÃØÏÇÏ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÌÉ\n"
-#~ "    ì¦ÎÁËÓ.\n"
-#~ "\n"
-#~ "  - óÐÅæÁÌØÎÉÊ: ñËÝÏ ÷É ÚÎÁÊÏͦ Ú GNU/ì¦ÎÁËÓÏÍ, ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-#~ "    Ò¦×ÅÎØ ×ÉËÏÒÉÓÔÁÎÎÑ ÓÉÓÔÅÍÉ. äÉצÔØÓÑ ÐÏÄÒÏÂÉæ ÄÁ̦.\n"
-#~ "\n"
-#~ "  - åËÓÐÅÒÔ: ñËÝÏ ÷É ×¦ÌØÎÏ ÐÏÞÕ×Á¤ÔÅ × ÓÅÒÅÄÏ×Éݦ GNU/Linux ¦ ÈÏÞÅÔÅ\n"
-#~ "    ×ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ, ÔÁË ÑË ÷ÁÍ ÈÏÞÅÔØÓÑ. ôÁË ÓÁÍÏ, ÑË ¦ × ËÌÁÓ¦\n"
-#~ "    \"óÐÅæÁÌØÎÉÊ\" ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ×ÉÓÏËÏ ÓÐÅæÁ̦ÚÏ×ÁÎÕ\n"
-#~ "    ÓÉÓÔÅÍÕ. áÌÅ, ÂÕÄØ-ÌÁÓËÁ, ÷éâéòáêôå ãåê òåöéí, ô¶ìøëé ñëýï ÷é äïâòå\n"
-#~ "    òïúõí¶´ôå, ýï ÷é òïâéôå!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c  to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d  to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m  to set the mount point\n"
-#~ msgstr ""
-#~ "úÁÒÁÚ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Ð¦ÄÒÏÚĦÌÉ ÎÁ ÄÉÓËÕ, ÄÅ ÷É ÂÕÄÅÔÅ\n"
-#~ "×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÷ÁÛÕ ÓÉÓÔÅÍÕ ì¦ÎÁËÓ-Mandrake, ÑËÝÏ ÔÁ˦ ÒÏÚĦÌÉ ×ÖÅ\n"
-#~ "×ÉÚÎÁÞÅΦ (×¦Ä ÐÏÐÅÒÅÄÎØϧ ÕÓÔÁÎÏ×ËÉ ì¦ÎÁËÓÁ ÁÂÏ ÑËÝÏ ÷É ÒÏÚĦÌÉÌÉ\n"
-#~ "ÄÉÓË ¦ÎÛÉÍÉ ÚÁÓÏÂÁÍÉ). ÷ ¦ÎÛÉÈ ×ÉÐÁÄËÁÈ ÷É ÐÏ×ÉÎΦ ÓÔ×ÏÒÉÔÉ ÒÏÚĦÌÉ ÎÁ\n"
-#~ "ÄÉÓËÕ. ãÑ ÏÐÅÒÁÃ¦Ñ ÒÏÚÐÏĦÌѤ ¤ÍΦÓÔØ ×Ó¦È ÄÉÓË¦× ËÏÍÐ'ÀÔÅÒÁ × Ë¦ÌØËÁ\n"
-#~ "ÏËÒÅÍÉÈ ÏÂÌÁÓÔÅÊ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÍ ÔÒÅÂÁ ÓÔ×ÏÒÉÔÉ ÎÏצ ЦÄÒÏÚĦÌÉ, ÓËÏÒÉÓÔÁÊÔÅÓÑ ÒÅÖÉÍÏÍ\n"
-#~ "\"á×ÔÏÍÁÔÉÞÎÅ ×ÉÚÎÁÞÅÎÎÑ\" ÝÏ Á×ÔÏÍÁÔÉÞÎÏ ÓÔ×ÏÒÉÔÉ ÎÅÏÂȦÄΦ ÄÌÑ\n"
-#~ "ì¦ÎÁËÓÁ ЦÄÒÏÚĦÌÉ. ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÄÉÓË, ÄÌÑ ÒÏÚÐÏĦÌÕ ÎÁ\n"
-#~ "ЦÄÒÏÚĦÌÉ, ËÌÁÃÎÕ×ÛÉ ÎÁ \"hda\" ÝÏ ×ÉÂÒÁÔÉ ÐÅÒÛÉÊ ÄÉÓË ÔÉÐÕ IDE, \"hdb"
-#~ "\"\n"
-#~ "ÝÏ ×ÉÂÒÁÔÉ ÄÒÕÇÉÊ IDE ÄÉÓË, ÁÂÏ ËÌÁÃΦÔØ ÎÁ \"sda\" ÄÌÑ ×ÉÂÏÒÕ ÐÅÒÛÏÇÏ\n"
-#~ "SCSI ÄÉÓËÕ, ÔÏÝÏ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ä×Á ЦÄÒÏÚĦÌÉ, ÝÏ Ú×ÉÞÁÊÎÏ ÍÁÀÔØ ¦ÓÎÕ×ÁÔÉ, ÃÅ - ËÏÒÅÎÅ×Á ÆÁÊÌÏ×Á\n"
-#~ "ÓÉÓÔÅÁ (/), Ú ÑËϧ ÐÏÞÉÎÁ¤ÔØÓÑ ×ÓÑ ¦¤ÒÁÒÈ¦Ñ ÄÉÒÅËÔÏÒ¦Ê ÆÁÊÌÏ×ϧ\n"
-#~ "ÓÉÓÔÅÍÉ, ÔÁ ЦÄÒÏÚÄ¦Ì /boot, × ÑËÏÍÕ ÚÁÐÉÓÕÀÔØÓÑ ×Ó¦ ÆÁÊÌÉ, ÎÅÏÂȦÄΦ\n"
-#~ "ÄÌÑ ÔÏÇÏ, ÝÏ ËÏÍÐ'ÀÔÅÒ ÚÁ×ÁÎÔÁÖÉ×ÓÑ ÐÒÉ ×ÍÉËÁÎΦ.\n"
-#~ "\n"
-#~ "\n"
-#~ "úͦÎÉ ×¦Ä Ã¦¤§ ÏÐÅÒÁæ§ Ú×ÉÞÎÏ ÂÕ×ÁÀÔØ ÎÅÚ×ÏÒÏÔΦ. ôÏÍÕ ÐÏÄ¦Ì ÄÉÓËÕ\n"
-#~ "ÞÁÓÔÏ ÂÕ×Á¤ ÄÕÖÅ È×ÉÌÀÀÞÏÀ È×ÉÌÀÀÞÉÍ ÍÏÍÅÎÔÏÍ ÄÌÑ ÎÅÄÏÓצÄÞÅÎÏÇÏ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÞÁ. DiskDrake ÚΦÍÁ¤ ÎÅÐÏÔÒ¦ÂÎÕ ÓËÌÁÄΦÓÔØ Ú ÃØÏÇÏ\n"
-#~ "ÐÒÏÃÅÓÕ. ú×ÅÒΦÔØÓÑ ÄÏ ÄÏËÕÍÅÎÔÁæ§ ¦ ÔÒÏÈÉ ×É×Þ¦ÔØ §§ ÐÅÒÛ, ΦÖ\n"
-#~ "ÐÒÉÓÔÕÐÁÔÉ ÄÏ ÃØÏÇÏ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷É ÍÏÖÅÔÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ ËÌÁצÁÔÕÒÏÀ ÄÌÑ ×ÉËÏÎÁÎÎÑ ÏÐÅÒÁÃ¦Ê ÐÒÉ ÒÏÚĦ̦\n"
-#~ "ÄÉÓËÕ: ÐÅÒÅÈÏÄØÔÅ Ú ÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ ÎÁ ¦ÎÛÉÊ ÚÁ ÄÏÐÏÍÏÇÏÀ ËÌÁ×¦Û Tab\n"
-#~ "ÔÁ ÓÔÒ¦ÌÏË ×ÇÏÒÕ/×ÎÉÚ. ð¦ÓÌÑ ÔÏÇÏ, ÑË Ð¦ÄÒÏÚÄ¦Ì ×ÉÂÒÁÎÏ ÷É ÍÏÖÅÔÅ\n"
-#~ "ËÏÒÉÓÔÕ×ÁÔÉÓØ: \n"
-#~ "\n"
-#~ " - Ctrl-c ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÎÏ×ÏÇÏ Ð¦ÄÒÏÚĦÌÕ (ËÏÌÉ ×ÉÂÒÁÎÉÊ ÐÕÓÔÉÊ "
-#~ "ЦÄÒÏÚĦÌ)\n"
-#~ "\n"
-#~ " - Ctrl-d ÝÏ ÓÔÅÒÔÉ Ð¦ÄÒÏÚĦÌ\n"
-#~ "\n"
-#~ " - Ctrl-m ÝÏ ×ÓÔÁÎÏ×ÉÔÉ ÔÏÞËÕ ÍÏÎÔÕ×ÁÎÎÑ\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "÷Ó¦ Ô¦ ЦÄÒÏÚĦÌÉ, Ñ˦ ÂÕÌÉ ÒÏÚÐÏĦÌÅΦ ÎÁ ÐÏÐÅÒÅÄÎØÏÍÕ ÅÔÁЦ,\n"
-#~ "ÍÁÀÔØ ÂÕÔÉ ×¦ÄÆÏÒÍÁÔÏ×ÁΦ, ÐÅÒÛ, Î¦Ö ÎÉÍÉ ÍÏÖÎÁ ÂÕÄÅ ËÏÒÉÓÔÕ×ÁÔÉÓÑ\n"
-#~ "(ÆÏÒÍÁÔÕ×ÁÎÎÑ ÏÚÎÁÞÁ¤ ÓÔ×ÏÒÅÎÎÑ ÆÁÊÌÏ×ϧ ÓÉÓÔÅÍÉ). ð¦Ä ÞÁÓ ÃØÏÇÏ, ÷É\n"
-#~ "ÔÁËÏÖ ÍÏÖÅÔŠצÄÆÏÒÍÁÔÕ×ÁÔÉ ×ÖÅ ÐÏÐÅÒÅÄÎØÏ ÆÏÒÍÁÔÏ×ÁΦ ÒÏÚĦÌÉ ÄÌÑ\n"
-#~ "ÔÏÇÏ, ÝÏ ÓÔÅÒÔÉ Ô¦ ÄÁΦ, ÝÏ ÔÁÍ ÚÁÐÉÓÁΦ. ÷¦ÄͦÔØÔÅ: ÎÅÍÁ¤\n"
-#~ "ÎÅÏÂȦÄÎÏÓÔ¦ × ÏÂÏ×'ÑÚËÏ×ÏÍÕ ÆÏÒÍÁÔÕ×ÁÎΦ Ô¦ ЦÄÒÏÚĦÌÉ, ÝÏ\n"
-#~ "ÐÏÐÅÒÅÄÎØÏ ¦ÓÎÕ×ÁÌÉ. ïÓÏÂÌÉ×Ï, ÑËÝÏ ÎÁ ÎÉÈ ÚÂÅÒ¦ÇÁÀÔØÓÑ ÄÁΦ, Ñ˦ ÷É\n"
-#~ "ÈÏÔ¦ÌÉ Â ÚÁÌÉÛÉÔÉ ÎÅÕÛËÏÄÖÅÎÉÍÉ. \n"
-#~ "îÁÊÞÁÓÔ¦ÛÅ ÕÔÒÉÍÕÀÔØÓÑ ×¦Ä ÆÏÒÍÁÔÕ×ÁÎÎÑ ÔÁËÉÈ ÒÏÚĦ̦×, ÑË /home ÔÁ\n"
-#~ "/usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "÷ÉÂÒÁΦ ÐÁËÅÔÉ ÚÁÒÁÚ ×ÓÔÁÎÏ×ÌÀÀÔØÓÑ. ãÑ ÏÐÅÒÁÃ¦Ñ ÍÁ¤ ÚÁÊÎÑÔÉ Ë¦ÌØËÁ\n"
-#~ "È×ÉÌÉÎ, ÑËÝÏ ÷É ÎÅ ×ÉÂÒÁÌÉ ÏÐæÀ ÄÌÑ ÐÏÎÏ×ÌÅÎÎÑ ¦ÓÎÕÀÞϧ ÓÉÓÔÅÍÉ. ÷\n"
-#~ "ÃØÏÍÕ ×ÉÐÁÄËÕ ÃÅ ÚÁÊÍŠ¦ÌØÛÅ ÞÁÓÕ ÎÁצÔØ ÄÏ ÐÏÞÁÔËÕ ÐÏÎÏ×ÌÅÎÎÑ."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "ñËÝÏ DrakX ÎÅ ÚÍ¦Ç ÚÎÁÊÔÉ ÷ÁÛÕ ÍÉÛËÕ, ÁÂÏ, ÑËÝÏ ÷É ÈÏÞÅÔÅ ÐÅÒÅצÒÉÔÉ,\n"
-#~ "ÑËÕ ÓÁÍŠצΠ×ÉÂÒÁ×, ÷ÁÍ ÂÕÄÅ ÎÁÄÁÎÏ ÓÐÉÓÏË ¦Ú ÔÉÐÁÍÉ ÍÉÛÏË.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÓ ×ÌÁÛÔÏ×Õ¤ ×ɦÒ, ÚÒÏÂÌÅÎÉÊ DrakX, ÐÒÏÓÔÏ ËÌÁÃΦÔØ ÎÁ ËÎÏÐæ\n"
-#~ "\"çÁÒÁÚÄ\" ̦×ÏÒÕÞ. ñËÝÏ Ö Î¦, ×ÉÂÅÒ¦ÔØ ¦Ú ÓÐÉÓËÕ ÔÏÊ ÔÉÐ ÍÉÛËÉ, ÑËÉÊ ÎÁ\n"
-#~ "÷ÁÛÕ ÄÕÍËÕ ¤ ÎÁÊÂÌÉÖÞÉÍ ÔÏÍÕ ÔÉÐÕ ÍÉÛËÉ, ÝÏ ÷É ÍÁ¤ÔÅ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ëÒ¦Í ÔÏÇÏ, ÑËÝÏ ÷É  ÍÁ¤ÔÅ ÍÉÛËÕ, Ú'¤ÄÎÁÎÕ Ú ÐÏÓ̦ÄÏ×ÎÉÍ ÐÏÒÔÏÍ, ÷ÁÍ\n"
-#~ "ÔÒÅÂÁ ÂÕÄÅ ×ËÁÚÁÔÉ, ÄÏ ÑËÏÇÏ Ú ÐÏÒÔ¦× ÃÑ ÍÉÛËÁ ЦÄËÌÀÞÅÎÁ."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "÷ ÃØÏÍÕ ÒÏÚĦ̦ ÷É ÍÏÖÅÔÅ ÓËÏÎƦ­ÕÒÕ×ÁÔÉ ÌÏËÁÌØÎÕ ÍÅÒÅÖÕ (LAN) ÁÂÏ\n"
-#~ "ÍÏÄÅÍ.\n"
-#~ "\n"
-#~ "ñËÝÏ ÷É ×ÉÂÅÒÅÔÅ \"LAN\" × ÃØÏÍÕ ÐÕÎËÔ¦, DrakX ÓÐÒÏÂÕ¤ צÄÛÕËÁÔÉ ÐÌÁÔÕ\n"
-#~ "Ethernet × ÷ÁÛ¦Ê ÓÉÓÔÅͦ. ÷Ó¦ ÐÌÁÔÉ PCI ÍÏÖÕÔØ ÂÕÔÉ ÚÎÁÊÄÅΦ ÔÁ\n"
-#~ "¦Î¦Ã¦Á̦ÚÏ×ÁΦ Á×ÔÏÍÁÔÉÞÎÏ. ïÄÎÁË, ÑËÝÏ ÷ÁÛÁ ÐÌÁÔÁ ÎÁÌÅÖÉÔØ ÄÏ ËÌÁÓÕ\n"
-#~ "ISA, Á×ÔÏÍÁÔÉÞÎÅ ×ÉÚÎÁÞÅÎÎÑ ÍÏÖÅ ÎÅ ÓÐÒÁÃÀ×ÁÔÉ, ¦ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ\n"
-#~ "×ÉÂÒÁÔÉ ÄÒÁÊ×ÅÒ ÄÌÑ Ã¦¤§ ÐÌÁÔÉ ¦Ú ÔÏÇÏ ÓÐÉÓËÕ, ÑËÉÊ ÷ÁÍ ÂÕÄÅ ÐÏËÁÚÁÎÏ\n"
-#~ "\n"
-#~ "\n"
-#~ "ýÏ ÓÔÏÓÕ¤ÔØÓÑ ÁÄÁÐÔÏÒ¦× SCSI, ÷É ÍÏÖÅÔÅ ÄÏÚ×ÏÌÉÔÉ ÄÒÁÊ×ÅÒÕ ×ÉÐÒÏÂÕ×ÁÔÉ\n"
-#~ "ÐÌÁÔÕ, ÁÂÏ ÚÁͦÓÔØ ÃØÏÇÏ ×ËÁÚÁÔÉ ÄÌÑ ÃØÏÇÏ ÄÒÁÊ×ÅÒÁ ÐÏÔÒ¦ÂΦ\n"
-#~ "ÐÁÒÁÍÅÔÒÉ, Ñ˦ ÷É ÍÏÖÅÔŠĦÚÎÁÔÉÓÑ Ú ÄÏËÕÍÅÎÔÁæ§ Ú ÷ÁÛÏÇÏ ÁÐÁÒÁÔÎÏÇÏ\n"
-#~ "ÚÁÂÅÚÐÅÞÅÎÎÑ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ Mandrake ì¦ÎÁËÓ ÎÁ ËÏÍÐ'ÀÔÅÒ¦, ÝÏ ¤ ÞÁÓÔÉÎÏÀ ×ÖÅ\n"
-#~ "¦ÓÎÕÀÞϧ ÍÅÒÅÖ¦, ×¦Ä ÁÄͦΦÓÔÒÁÔÏÒÁ ÍÅÒÅÖ¦ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ÏÔÒÉÍÁÔÉ\n"
-#~ "ÎÅÏÂȦÄΦ ÄÁΦ ÝÏÄÏ ÕÓÔÁÎÏ×ËÉ ÄÁÎϧ ÓÉÓÔÅÍÉ (IP ÁÄÒÅÓÕ, ÍÁÓËÕ ÍÅÒÅÖ¦\n"
-#~ ",ÞÉ, ÑË ËÁÖÕÔØ \"netmask\", ÔÁ ¦Í'Ñ ÃØÏÇÏ ÈÏÓÔÁ). ñËÝÏ Ö ÷É ×ÓÔÁÎÏ×ÌÀ¤ÔÅ\n"
-#~ "Ó×ÏÀ ÐÒÉ×ÁÔÎÕ ÍÅÒÅÖÕ × ÓÅÂÅ ×ÄÏÍÁ, ÎÁÐÒÉËÌÁÄ, ÷É ÍÁ¤ÔÅ ×ÉÂÒÁÔÉ ×Ó¦\n"
-#~ "ÁÄÒÅÓÉ ÓÁÍÏÓÔ¦ÊÎÏ.\n"
-#~ "\n"
-#~ "\n"
-#~ "÷ÉÂÅÒ¦ÔØ \"ú×'ÑÚÏË ÞÅÒÅÚ ÍÏÄÅÍ\" ¦ ÷ÁÛ ÍÏÄÅÍ ÔÁ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ\n"
-#~ "ÂÕÄÕÔØ Á×ÔÏÍÁÔÉÞÎÏ ÓËÏÎƦ­ÕÒÏ×ÁΦ. DrakX ÓÐÒÏÂÕ¤ ÚÎÁÊÔÉ ÷ÁÛ ÍÏÄÅÍ. \n"
-#~ "ñËÝÏ ÃÅ ÎÅ ×ÄÁÓÔØÓÑ, ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ÉÂÒÁÔÉ ×¦ÒÎÉÊ ÐÏÓ̦ÄÏ×ÎÉÊ ÐÏÒÔ, \n"
-#~ "ÄÏ ÑËÏÇÏ Ð¦ÄËÌÀÞÅÎÉÊ ÷ÁÛ ÍÏÄÅÍ."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/ì¦ÎÁËÓ ÍÏÖÅ ÐÒÁÃÀ×ÁÔÉ Ú ×ÅÌÉÞÅÚÎÏÀ ˦ÌØ˦ÓÔÀ ÐÒÉÎÔÅÒ¦×. ëÏÖÅÎ Ú ÃÉÈ\n"
-#~ "ÏËÒÅÍÉÈ ÔÉÐ¦× ÐÒÉÎÔÅÒ¦× ×ÉÍÁÇÁ¤ ÏËÒÅÍϧ ÕÓÔÁÎÏ×ËÉ. ÷¦ÄͦÔØÔÅ ÏÄÎÁË, ÝÏ\n"
-#~ "ÓÐÕÌÅÒ ÐÒÉÎÔÅÒÁ Ú×ÉÞÁÊÎÏ ×ÉËÏÒÉÓÔÏ×Õ¤ ÎÁÚ×Õ 'lp'; ÏÔÖÅ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ\n"
-#~ "ÍÁÔÉ ÏÄÉÎ ÐÒÉÎÔÅÒ Ú ÔÁËÏÀ ÎÁÚ×ÏÀ. áÌÅ ÷É ÍÏÖÅÔÅ ÄÁÔÉ ÏÄÎÏÍÕ ÐÒÉÎÔÅÒÕ\n"
-#~ "˦ÌØËÁ ÎÁÚ× ÒÏÚĦÌÅÎÉÈ Í¦Ö ÓÏÂÏÀ ÚÎÁËÁÍÉ '|'. ôÏÂÔÏ, ÑËÝÏ ÷É ×¦ÄÄÁ¤ÔÅ\n"
-#~ "ÐÅÒÅ×ÁÇÕ Â¦ÌØÛ ÏÓÍÉÓÌÅÎ¦Ê ÎÁÚצ, ÷ÁÍ ÐÒÏÓÔÏ ÔÒÅÂÁ ÐÏÓÔÁ×ÉÔÉ ÃÀ ÎÁÚ×Õ\n"
-#~ "ÎÁ ÐÏÞÁÔËÕ, ÑË, ÎÁÐÒÉËÌÁÄ: \"My Printer|lp\". ðÒÉÎÔÅÒ, ÑËÉÊ ÍÁ¤ 'lp'  ×\n"
-#~ "Ó×Ï§Ê ÎÁÚצ ÂÕÄÅ ÓÔÁÎÄÁÒÔÎÉÍ ÐÒÉÎÔÅÒÏÍ ÓÉÓÔÅÍÉ. \n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÛ ÐÒÉÎÔÅÒ ÂÅÚÐÏÓÅÒÅÄÎØÏ Ð¦ÄËÌÀÞÅÎÉÊ ÄÏ ÷ÁÛÏÇÏ ËÏÍÐ'ÀÔÅÒÁ,\n"
-#~ "×ÉÂÅÒ¦ÔØ \"ìÏËÁÌØÎÉÊ ÐÒÉÎÔÅÒ\". ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ËÁÚÁÔÉ, ÄÏ ÑËÏÇÏ\n"
-#~ "ÐÏÒÔÕ ÷ÁÛ ÐÒÉÎÔÅÒ Ð¦ÄËÌÀÞÅÎÉÊ ¦ ×ÉÂÒÁÔÉ ÔÁËÏÖ ×¦ÄÐÏצÄÎÉÊ Æ¦ÌØÔÒ ÄÌÑ\n"
-#~ "ÎØÏÇÏ. \n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÐÒÉÎÔÅÒ, ÎÁ ÑËÉÊ ÷É ÂÕÄÅÔÅ ÄÒÕËÕ×ÁÔÉ, ÚÎÁÈÏÄÉÔØÓÑ ÎÁ ¦ÎÛÏÍÕ\n"
-#~ "ËÏÍÐ'ÀÔÅÒ¦ Ú UNIX'ÏÍ, ÷ÁÍ ÓÌ¦Ä ×ÉÂÒÁÔÉ \"÷¦ÄÄÁÌÅÎÁ ÞÅÒÇÁ ÄÒÕËÕ\n"
-#~ "lpq\". äÌÑ ÔÏÇÏ, ÝÏ ÄÒÕËÕ×ÁÔÉ ÎÁ ÃØÏÍÕ ÐÒÉÎÔÅÒ¦, ÷ÁÍ ÎÅ ÐÏÔÒ¦ÂÎÏ\n"
-#~ "ÍÁÔÉ Ó×¦Ê ÒÁÈÕÎÏË ÞÉ ÐÁÒÏÌØ ÎÁ צÄÄÁÌÅÎÏÍÕ ËÏÍÐ'ÀÔÅÒ¦, ÁÌÅ ÎÁÔÏͦÓÔØ\n"
-#~ "÷É ÐÏ×ÉÎΦ ÚÎÁÔÉ ÎÁÚ×Õ ×¦ÄÄÁÌÅÎϧ ÞÅÒÇÉ ÎÁ ÔÏÍÕ ÓÅÒ×ÅÒ¦. \n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÄÒÕËÕ×ÁÔÉ ÎÁ SMB ÐÒÉÎÔÅÒ (ÝÏ ÏÚÎÁÞÁ¤, ÐÒÉÎÔÅÒ\n"
-#~ "ЦÄ'¤ÄÎÁÎÉÊ ÄÏ ËÏÍÐ'ÀÔÅÒÁ Ú Windows 9x/NT), ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ÂÕÄÅ ×ËÁÚÁÔÉ\n"
-#~ "ÊÏÇÏ SMB ¦Í'Ñ (ÃÅ ¦Í'Ñ ×¦ÄÒ¦ÚÎѤÔØÓÑ ×¦Ä TCP/IP ¦ÍÅΦ), ¦ ÍÏÖÌÉ×Ï\n"
-#~ "ÔÁËÏÖ ÊÏÇÏ IP ÁÄÒÅÓÕ, Á ÔÁËÏÖ ¦Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ, ÒÏÂÏÞÕ ÇÒÕÐÕ ÔÁ\n"
-#~ "ÐÁÒÏÌØ ÐÏÔÒ¦ÂΦ ÄÌÑ ÄÏÓÔÕÐÕ ÄÏ ÐÒÉÎÔÅÒÁ, ¦, Ú×ÉÞÁÊÎÏ-Ö ¦Í'Ñ\n"
-#~ "ÐÒÉÎÔÅÒÁ. ôÅÖ ÓÁÍÅ ÓÔÏÓÕ¤ÔØÓÑ ÐÒÉÎÔÅÒÁ ÄÌÑ NetWare, ËÒ¦Í ÔÏÇÏ, ÝÏ ÷ÁÍ\n"
-#~ "ÎÅ ÐÏÔÒ¦ÂÎÏ ÍÁÔÉ ¦ÎÆÏÒÍÁæÀ ÐÒÏ ÒÏÂÏÞ¦ ÇÒÕÐÉ"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "íÉ ÎÁÓÔ¦ÊÌÉ×Ï ÒÅËÏÍÅÎÄÕ¤ÍÏ ÷ÁÍ ÄÁÔÉ ÔÕÔ ×¦ÄÐÏצÄØ \"ôÁË\". ñËÝÏ ÷É\n"
-#~ "×ÓÔÁÎÏ×ÉÔŠЦÚΦÛÅ Micrososft Windows ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦, ÃÑ\n"
-#~ "ÕÓÔÁÎÏ×ËÁ ÐÅÒÅÔÒÅ ÚÁ×ÁÎÔÁÖÕ×ÁÌØÎÉÊ ÓÅËÔÏÒ. ñËÝÏ Õ ÷ÁÓ ÎÅ ÂÕÄÅ ÄÉÓËÅÔÉ\n"
-#~ "ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ, ÷É ÎÅ ÚÍÏÖÅÔÅ ÚÁ×ÁÎÔÁÖÉÔÉÓÑ Õ GNU/ì¦ÎÁËÓ."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "÷¦ÄÍÏ×ÉÔÉÓÑ ×¦Ä ÚͦÎ?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "ñËÉÊ ÔÉÐ ÍÉÛ¦ ×É ÍÁ¤ÔÅ?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "á×ÔÏÍÁÔÉÞÎÁ ÒÏÚĦÌØÎÁ ÚÄÁÔΦÓÔØ"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "ýÏ ×ÉÚÎÁÞÉÔÉ ÒÏÚĦÌØΦ ÚÄÁÔÎÏÓÔ¦, Ñ ÓÐÒÏÂÕÀ ×ÓÔÁÎÏ×ÉÔÉ Ë¦ÌØËÁ Ú ÎÉÈ\n"
-#~ "÷ÁÛ ÅËÒÁÎ ÂÌÉÍΊ˦ÌØËÁ ÒÁÚ¦×...\n"
-#~ "÷É ÍÏÖÅÔÅ ×ÉÍËÎÕÔÉ ÍÏΦÔÏÒ, ÑËÝÏ ÈÏÞÅÔÅ. ÷É ÐÏÞÕ¤ÔÅ Ú×ÕËÏ×ÉÊ ÓÉÇÎÁÌ,\n"
-#~ "ËÏÌÉ ÔÅÓÔÕ×ÁÎÎÑ ÚÁ˦ÎÞÉÔØÓÑ"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "ñ ÍÏÖÕ ÓÐÒÏÂÕ×ÁÔÉ ÚÎÁÊÔÉ Ô¦ ÒÏÚĦÌØΦ ÚÄÁÔÎÏÓÔ¦, Ú ÑËÉÍÉ Ñ ÍÏÖÕ\n"
-#~ "ÐÒÁÃÀ×ÁÔÉ (ÑË, ÎÁÐÒÉËÌÁÄ, 800x600). \n"
-#~ "áÌÅ, × ÄÅÑËÉÈ ×ÉÐÁÄËÁÈ ËÏÍÐ'ÀÔÅÒ ÍÏÖÅ ÚÁ×ÉÓÎÕÔÉ ÐÒÉ ÃØÏÍÕ. þÉ ÷É\n"
-#~ "ÈÏÞÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ÃÅÊ ÔÅÓÔ? "
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "îÅ ÍÏÖÕ ÚÎÁÊÔÉ ÐÏÔÒ¦ÂÎÏÇÏ ÒÏÂÏÞÏÇÏ ÒÅÖÉÍÕ\n"
-#~ "ðÏÐÒÏÂÕÊÔÅ ×ÉÂÒÁÔÉ ¦ÎÛÕ ×¦ÄÅÏ ÐÌÁÔÕ ÞÉ ÍÏΦÔÏÒ"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "á×ÔÏÍÁÔÉÞÎÉÊ ÐÏÛÕË ÒÏÚĦÌØÎÉÈ ÚĦÂÎÏÓÔÅÊ"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "íÉÛÁ Apple ADB"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "íÉÛÁ Apple ADB (Ú Ä×ÏÍÁ ËÎÏÐËÁÍÉ)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "íÉÛÁ Apple ADB (Ú ÔÒØÏÍÁ ÁÂÏ Â¦ÌØÛÅ ËÎÏÐËÁÍÉ)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "íÉÛÁ USB Apple"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "íÉÛËÁ USB Apple (Ú Ä×ÏÍÁ ËÌÁצÛÁÍÉ)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "íÉÛËÁ USB Apple (Ú ÔÒØÏÍÁ ÁÂÏ Â¦ÌØÛÅ ËÌÁצÛÁÍÉ)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "íÉÛËÁ USB (Ú ÔÒØÏÍÁ ÁÂÏ Â¦ÌØÛÅ ËÌÁצÛÁÍÉ)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A ÔÁ ×ÉÝÅ (serial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (serial)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (serial)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (serial)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generic Mouse (serial)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft-ÓÕͦÓÎÁ (serial)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Generic 3 Button Mouse (serial)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (ÐÏÓ̦ÄÏ×ÎÉÊ ÐÏÒÔ)"
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ, ÑËÉÊ ÁÄÁÐÔÅÒ ÍÅÒÅÖ¦ ÂÕÄŠЦÄËÌÀÞÅÎÏ ÄÏ ÌÏËÁÌØÎϧ\n"
-#~ "ÍÅÒÅÖ¦.\n"
-#~ "Z\n"
-#~ "ñËÝÏ ÎÅ ÚÎÁ¤ÔÅ, ×ÉÂÅÒ¦ÔØ eth0.\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ÎÅ ÍÏÖÕ ÚÍÏÎÔÕ×ÁÔÉ NFS"
-
-#~ msgid "tie"
-#~ msgstr "ËÒÁ×ÁÔËÁ"
-
-#~ msgid "brunette"
-#~ msgstr "ÂÒÀÎÅÔËÁ"
-
-#~ msgid "girl"
-#~ msgstr "Ħ×ÞÉÎÁ"
-
-#~ msgid "woman-blond"
-#~ msgstr "ÂÌÏÎÄÉÎËÁ"
-
-#~ msgid "automagic"
-#~ msgstr "Á×ÔÏÍÁÔÉÞÎÏ"
-
-#~ msgid "Cryptographic"
-#~ msgstr "ëÒÉÐÔÏÇÒÁƦÑ"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "ëÏÒÉÓÔÕ×ÁÔÉÓÑ ×Ó¦Í ÖÏÒÓÔËÉÍ ÄÉÓËÏÍ"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "îÅ ÎÁÓÔÒÏÀ×ÁÔÉ ÍÅÒÅÖÕ"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "þÉ ÷É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ ÍÅÒÅÖÕ ÓÉÓÔÅÍÉ?"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX ÓÔ×ÏÒÉÔØ ËÏÎƦÇÕÒÁæÊΦ ÆÁÊÌÉ ÑË ÄÌÑ Xfree 3.3, ÔÁË ¦ ÄÌÑ XFree\n"
-#~ "4.0. ú×ÉÞÁÊÎÏ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÓÅÒ×ÅÒ 4.0, ËÒ¦Í ÔÏÇÏ ×ÉÐÁÄËÕ, ËÏÌÉ ÷ÁÛÁ "
-#~ "צÄÅÏÐÌÁÔÁ ΊЦÄÔÒÉÍÕ¤ÔØÓÑ ÃÉÍ ÓÅÒ×ÅÒÏÍ.\n"
-#~ "\n"
-#~ "þÉ ÈÏÞÅÔÅ ÚÂÅÒÅÇÔÉ ÔÁËÏÖ ÕÓÔÁÎÏ×ËÕ XFree 3.3?"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "þÉ ÷É ÏÔÒÉÍÁÌÉ ÎÁÚ×Õ ÈÏÓÔÁ?"
-
-#~ msgid "Show less"
-#~ msgstr "ðÏËÁÚÁÔÉ ×ÓÅ"
-
-#~ msgid "Show more"
-#~ msgstr "ðÏËÁÚÁÔÉ Â¦ÌØÛÅ"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "óÐÅÃÉƦËÁæ§ ÌÏËÁÌØÎϧ ÍÅÒÅÖ¦"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "úÁÒÁÚ ÷É ÍÏÖÅÔÅ ×ÉÒ¦ÛÉÔÉ ÑËÕ ÍÅÒÅÖÕ ËÌÁÓÕ C ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ.\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "óЦÌØÎÅ Ú'¤ÄÎÁÎÎÑ Ú ¦ÎÔÅÒÎÅÔÏÍ - ÕÓÔÁÎÏ×ËÁ %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "ãÅÊ ¦ÎÔÅÒÆÅÊÓ ÚÁÒÁÚ ÂÕÄÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "÷ÓÅ ÓËÏÎƦ­ÕÒÏ×ÁÎÏ!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "ñËÁ Õ ÷ÁÓ ÒÏÚËÌÁÄËÁ ËÌÁצÁÔÕÒÉ?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "óÐÒÏÂÕ×ÁÔÉ ×¦ÄÛÕËÁÔÉ PCMCIA ËÁÒÔËÉ?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "óÐÒÏÂÕ×ÁÔÉ ×¦ÄÛÕËÁÔÉ %s ÐÒÉÓÔÒϧ?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "þÉ ÷É ÈÏÞÅÔÅ ÎÁÓÔÒϧÔÉ ÓÉÓÔÅÍÕ ÄÌÑ Ú×'ÑÚËÕ Ú ¦ÎÔÅÒÎÅÔÏÍ ÞÅÒÅÚ ÐÒÏ×ÁÊÄÅÒÁ?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "óÐÒÏÂÕ×ÁÔÉ ×¦ÄÛÕËÁÔÉ PCI ÐÒÉÓÔÒϧ?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "ûÕËÁÀ ЦÄÒÏÚÄ¦Ì root..."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: ãÅ ÎÅ root ЦÄÒÏÚĦÌ. ÷ÉÂÅÒ¦ÔØ ÂÕÄØ-ÌÁÓËÁ ¦ÎÛÉÊ."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ Ð¦ÄÒÏÚĦÌ, ÑËÉÊ ÷É ÈÏÞÅÔÅ ÚÒÏÂÉÔÉ Ð¦ÄÒÏÚĦÌÏÍ root Õ ÷ÁÛ¦Ê "
-#~ "ÓÉÓÔÅͦ?"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "õ ÷ÁÓ ÎÅÍÁ¤ ÖÏÄÎÏÇÏ Ð¦ÄÒÏÚĦÌÕ ÄÌÑ Windows!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "õ ÷ÁÓ ÎÅ ×ÉÓÔÁÞÁ¤ ͦÓÃÑ ÄÌÑ Lnx4win!"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U íÂ"
-
-#~ msgid "SILO main options"
-#~ msgstr "ïÓÎÏ×Φ ÏÐæ§ SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "ôÕÔ ÎÁ×ÅÄÅΦ ÔÁ˦ ÏÐæ§ ÄÌÑ SILO.\n"
-#~ "÷É ÍÏÖÅÔÅ ÁÂÏ ÄÏÄÁÔÉ ÝÅ ÄÅÑ˦, ÁÂÏ ÚͦÎÉÔÉ Ô¦, ÝÏ ×ÖÅ ¦ÓÎÕÀÔØ."
-
-#~ msgid "This label is already in use"
-#~ msgstr "ãÑ ÅÔÉËÅÔËÁ ×ÖÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "õÓÔÁÎÏ×ËÁ SILO ÎÅÕÓЦÛÎÁ. óÔÁÌÁÓÑ ÐÏÍÉÌËÁ:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
-#~ "to use, it will insert it (them)  automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "äÌÑ ÐÏÞÁÔËÕ DrakX ÓÐÒÏÂÕ¤ צÄÛÕËÁÔÉ ÏÄÎÕ ÁÂÏ Â¦ÌØÛÅ ÐÌÁÔ PCI\n"
-#~ "SCSI. ñËÝÏ ÃÑ ÓÐÒÏÂÁ ×ÄÁÓÔØÓÑ ¦ DrakX ÚÎÁ¤, Ñ˦ ÄÒÁÊ×ÅÒÉ\n"
-#~ "×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÄÌÑ ÃÉÈ ÐÌÁÔ, צΠÚÁ×ÁÎÔÁÖÉÔØ §È Á×ÔÏÍÁÔÉÞÎÏ. \n"
-#~ "\n"
-#~ "ñËÝÏ SCSI ÐÌÁÔÁ, ÑËÏÀ ÷É ËÏÒÉÓÔÕ¤ÔÅÓØ ¤ ISA ÐÌÁÔÏÀ, ÁÂÏ ÔÁËÏÀ PCI\n"
-#~ "ÐÌÁÔÏÀ, ÐÒÏ ÑËÕ DrakX ÎÅ ÚÎÁ¤, ÁÂÏ × ÔÏÍÕ ×ÉÐÁÄËÕ, ËÏÌÉ ÷É ÎÅ ÍÁ¤ÔÅ\n"
-#~ "SCSI ÐÌÁÔ, ÷É ÐÏÂÁÞÉÔÅ ÚÁÐÒÏÛÅÎÎÑ, ÄÅ ÷ÁÍ ÔÒÅÂÁ צÄÐÏצÓÔÉ, ÎÁ\n"
-#~ "ÚÁÐÉÔÁÎÎÑ, ÞÉ ÍÁ¤ÔÅ ÷É ÔÁËÕ ÐÌÁÔÕ, ÞÉ Î¦.\n"
-#~ "ñËÝÏ ÷É ÎÅ ÍÁ¤ÔÅ ÐÌÁÔÉ, ÄÁÊÔŠצÄÐÏצÄØ \"î¦\". ñËÝÏ Õ ÷ÁÓ\n"
-#~ "×ÓÔÁÎÏ×ÌÅÎÁ ÏÄÎÁ ÁÂÏ Ë¦ÌØËÁ ÔÁËÉÈ ÐÌÁÔ, ÄÁÊÔŠצÄÐÏצÄØ\n"
-#~ "\"ôÁË\". ð¦ÓÌÑ ÃØÏÇÏ Ú'Ñ×ÉÔØÓÑ ÓÐÉÓÏË ÄÒÁÊ×ÅÒ¦×. ÷ÁÍ ÐÏÔÒ¦ÂÎÏ ×ÉÂÒÁÔÉ\n"
-#~ "ÏÄÉÎ ÄÒÁÊ×ÅÒ Ú ÃØÏÇÏ ÓÐÉÓËÕ.\n"
-#~ "\n"
-#~ "ð¦ÓÌÑ ÔÏÇÏ, ÑË ÷É ×ÉÂÅÒÅÔÅ ÄÒÁÊ×ÅÒ, DrakX ÓÐÉÔÁ¤ ÷ÁÓ, ÞÉ ÎÅ ÈÏÞÅÔÅ ÷É\n"
-#~ "×ËÁÚÁÔÉ ÐÁÒÁÍÅÔÒÉ ÄÌÑ ÎØÏÇÏ. óÐÏÞÁÔËÕ ÄÁÊÔÅ ÚÍÏÇÕ ÄÒÁÊ×ÅÒÕ ÏÐÒÏÂÕ×ÁÔÉ\n"
-#~ "÷ÁÛÕ ÁÐÁÒÁÔÕÒÕ: × Â¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× ÃÅ ÓÐÒÁÃØÏ×Õ¤.\n"
-#~ "\n"
-#~ "ñËÝÏ Ö Î¦ - ÎÅ ÚÁÂÕÄØÔÅ, ÝÏ ¦ÎÆÏÒÍÁæÀ ÐÒÏ Ô¦ ÐÒÉÓÔÒϧ, Ñ˦ Õ ÷ÁÓ\n"
-#~ "×ÓÔÁÎÏ×ÌÅΦ, ÷É ÍÏÖÅÔŠĦÓÔÁÔÉ Ú Windows (ÑËÝÏ, ×¦Î Õ ÷ÁÓ, Ú×ÉÞÁÊÎÏ,\n"
-#~ "×ÓÔÁÎÏ×ÌÅÎÉÊ), ÔÁË ÑË ÃÅ ÒÅËÏÍÅÎÄÏ×ÁÎÏ ËÅÒ¦×ÎÉÃÔ×ÏÍ ÐÏ ÕÓÔÁÎÏ×æ. ã¦\n"
-#~ "ÐÁÒÁÍÅÔÒÉ ÷É ÐÏ×ÉÎΦ ×ËÁÚÁÔÉ ÄÒÁÊ×ÅÒÕ."
-
-#~ msgid "Shutting down"
-#~ msgstr "÷ÉÍÉËÁÀ"
-
-#~ msgid "useless"
-#~ msgstr "ÎÅ ÚÎÁÈÏÄÉÔØ ÚÁÓÔÏÓÕ×ÁÎÎÑ"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "äÅÑ˦ Ú TrueType ÛÒÉÆÔ¦× Ú Windows ÚÎÁÊÄÅΦ ÎÁ ÷ÁÛÏÍÕ ËÏÍÐ'ÀÔÅÒ¦.  ÷É\n"
-#~ "ÈÏÞÅÔÅ ÎÉÍÉ ÓËÏÒÉÓÔÁÔÉÓÑ? áÌÅ ×ÐÅ×ΦÔØÓÑ, ÝÏ ÷É ÍÁ¤ÔÅ ÐÒÁ×Á ÎÁ\n"
-#~ "×ÉËÏÒÉÓÔÁÎÎÑ ÃÉÈ ÛÒÉÆÔ¦× Õ ì¦ÎÁËÓ¦."
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "ñËÝÏ ÒÁΦÛÅ ÎÅ ÂÕÌÏ ×ÓÔÁÎÏ×ÌÅÎÏ ÖÏÄÎϧ ÓÉÓÔÅÍÉ Ú ì¦ÎÁËÓÏÍ ÁÂÏ ÑËÝÏ "
-#~ "÷ÉÈÏÞÅÔÅ\n"
-#~ "ÍÁÔÉ Ë¦ÌØËÁ Ò¦ÚÎÉÈ ×ÅÒÓ¦Ê ì¦ÎÁËÓÁ ×ÉÂÅÒ¦ÔØ \"õÓÔÁÎÏ×ËÁ\".\n"
-#~ "\n"
-#~ "ñËÝÏ ÷É ÈÏÞÅÔÅ ÐÏÎÏ×ÉÔÉ ÒÁΦÛÅ ×ÓÔÁÎÏ×ÌÅΦ ×ÅÒÓ¦§ Mandrake ì¦ÎÁËÓÁ: \n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000, 7.0 (Air) ×ÉÂÅÒ¦ÔØ\"ðÏÎÏ×ÌÅÎÎÑ\""
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "þÉ ÷É ÈÏÞÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ LILO?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "ôÅÐÅÒ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÐÒÏÇÒÁÍΦ ÐÁËÅÔÉ ÄÌÑ ÕÓÔÁÎÏ×ËÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "óÐÏÞÁÔËÕ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÇÒÕÐÕ ÐÁËÅÔÁ ÄÌÑ ÕÓÔÁÎÏ×ËÉ ÞÉ\n"
-#~ "ÐÏÎÏ×ÌÅÎÎÑ. ð¦ÓÌÑ ÃØÏÇÏ ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ Â¦ÌØÛÅ ÐÁËÅÔ¦× × ÚÁÌÅÖÎÏÓÔ¦\n"
-#~ "×¦Ä ÚÁÇÁÌØÎÏÇÏ ÏÂ'¤ÍÕ ÐÁËÅÔ¦×, ÝÏ ÷É ÈÏÞÅÔÅ ×ÉÂÒÁÔÉ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ëÏÌÉ ÷É ÚÎÁÈÏÄÉÔÅÓØ × ÒÅÖÉͦ ÅËÓÐÅÒÔÁ, ÷É ÍÏÖÅÔÅ ×ÉÂÒÁÔÉ ÏËÒÅͦ\n"
-#~ "ÐÁËÅÔÉ. ðÁÍ'ÑÔÁÊÔÅ, ÝÏ ÕÓÔÁÎÏ×ËÁ ÄÅÑËÉÈ ÐÁËÅÔ¦× ×ÉÍÁÇÁ¤ ÐÏÐÅÒÅÄÎØϧ\n"
-#~ "ÕÓÔÁÎÏ×ËÉ ¦ÎÛÉÈ ÐÁËÅÔ¦×. ãÅ ÎÁÚÉ×ÁÀÔØ ÚÁÌÅÖΦÓÔÀ ÐÁËÅÔ¦×. ô¦ ÐÁËÅÔÉ,\n"
-#~ "Ñ˦ ÷É ×ÉÂÅÒÅÔÅ ¦ Ô¦ ÐÁËÅÔÉ, ×¦Ä ÑËÉÈ ×ÏÎÉ ÚÁÌÅÖÁÔØ ÂÕÄÕÔØ ×ÉÂÒÁΦ\n"
-#~ "Á×ÔÏÍÁÔÉÞÎÏ ÄÌÑ ÕÓÔÁÎÏ×ËÉ. ðÁËÅÔ ÎÅÍÏÖÌÉ×Ï ×ÓÔÁÎÏ×ÉÔÉ ÂÅÚ ÕÓÔÁÎÏ×ËÉ\n"
-#~ "×Ó¦È ÐÁËÅÔ¦×, ×¦Ä ÑËÉÈ ×¦Î ÚÁÌÅÖÉÔØ."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) ÍÏÖÅ ÚÁ×ÁÎÔÁÖÕ×ÁÔÉ ¦ÎÛ¦ ÏÐÅÒÁæÊΦ ÓÉÓÔÅÍÉ. õ\n"
-#~ "¦ÌØÛÏÓÔ¦ ×ÉÐÁÄË¦× ×ÏÎÉ ×¦ÒÎÏ ×ÉÚÎÁÞÁÀÔØÓÑ Ð¦Ä ÞÁÓ ÕÓÔÁÎÏ×ËÉ\n"
-#~ "ÓÉÓÔÅÍÉ. ñËÝÏ ÷É ÎÅ ÂÁÞÉÔÅ ÷ÁÛϧ ÓÉÓÔÅÍÉ Õ ÓÐÉÓËÕ, ÷É ÍÏÖÅÔÅ ÄÏÄÁÔÉ §§\n"
-#~ "ÚÁÒÁÚ.\n"
-#~ "\n"
-#~ "\n"
-#~ "ñËÝÏ ÷É ÎÅ ÈÏÞÅÔÅ, ÝÏ ËÏÖÅÎ Í¦Ç ÚÁ×ÁÎÔÁÖÉÔÉ ÏÄÎÕ ¦Ú ÃÉÈ ÓÉÓÔÅÍ, ÷É\n"
-#~ "ÍÏÖÅÔÅ ÚÁÂÒÁÔÉ §§ ÚÁÒÁÚ ¦Ú ÓÐÉÓËÕ (ÄÌÑ §§ ÚÁ×ÁÎÔÁÖÅÎÎÑ ÐÏÔÒ¦ÂÎÁ ÂÕÄÅ\n"
-#~ "ÄÉÓËÅÔÁ)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "ôÅÐÅÒ, ЦÓÌÑ ÔÏÇÏ, ÑË ÷É ×ÉÂÒÁÌÉ ÂÁÖÁΦ ÇÒÕÐÉ, ×ÉÂÅÒ¦ÔØ, ÂÕÄØ-ÌÁÓËÁ,\n"
-#~ "˦ÌØ˦ÓÔØ ÐÁËÅÔ¦× ÄÌÑ ÕÓÔÁÎÏ×ËÉ. ÷ ĦÁÐÁÚÏΦ ×¦Ä Í¦Î¦ÍÁÌØÎϧ ÕÓÔÁÎÏ×ËÉ\n"
-#~ "ÄÏ ÐÏ×Îϧ ÕÓÔÁÎÏ×ËÉ ËÏÖÎϧ ×ÉÂÒÁÎϧ ÇÒÕÐÉ."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "äÌÑ ÐÏ×Îϧ ÕÓÔÁÎÏ×ËÉ ×ÉÂÒÁÎÉÈ ÇÒÕÐ ÷ÁÍ ÐÏÔÒ¦ÂÎÏ %dí צÌØÎÏÇÏ ÐÒÏÓÔÏÒÕ\n"
-#~ "ÎÁ ÄÉÓËÕ. ÷É ÍÏÖÅÔÅ ÐÒÏÄÏ×ÖÕ×ÁÔÉ ÕÓÔÁÎÏ×ËÕ, ÁÌÅ ÐÁÍ'ÑÔÁÊÔÅ, ÝÏ ÷É ÎÅ\n"
-#~ "ÂÕÄÅÔÅ ÍÁÔÉ ×Ó¦ ÐÁËÅÔÉ."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "÷ÉÂÅÒ¦ÔØ:\n"
-#~ "\n"
-#~ "  - òÅËÏÍÅÎÄÏ×ÁÎÉÊ: ñËÝÏ ÷É Î¦ËÏÌÉ ÄÏ ÃØÏÇÏ ÎÅ ×ÓÔÁÎÏ×ÌÀ×ÁÌÉ ì¦ÎÁËÓ.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - óÐÅæÁÌØÎÉÊ: ñËÝÏ ÷É ÚÎÁÊÏͦ Ú ì¦ÎÁËÓÏÍ, ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ\n"
-#~ "Ò¦×ÅÎØ ×ÉËÏÒÉÓÔÁÎÎÑ ×ÓÔÁÎÏ×ÌÅÎÉÈ ÐÁËÅÔ¦× ÔÁ˦, ÑË Ú×ÉÞÁÊÎÉÊ, ÒÏÚÒÏÂÎÉË\n"
-#~ "ÔÁ ÓÅÒ×ÅÒ. ÷ÉÂÅÒ¦ÔØ \"ú×ÉÞÁÊÎÉÊ\", ÄÌÑ Ú×ÉÞÁÊÎÏÇÏ ×ÉËÏÒÉÓÔÁÎÎÑ ÓÉÓÔÅÍÉ,\n"
-#~ "ÑË ÐÅÒÓÏÎÁÌØÎÉÍ ËÏÍÐ'ÀÔÅÒÏÍ. ñËÝÏ ÷É ÂÕÄÅÔÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÓÉÓÔÅÍÕ ×\n"
-#~ "ÏÓÎÏ×ÎÏÍÕ ÄÌÑ ÒÏÚÒÏÂËÉ, ×ÉÂÅÒ¦ÔØ \"òÏÚÒÏÂÎÉË\". áÂÏ ×ÉÂÅÒ¦ÔØ \"óÅÒ×ÅÒ\",\n"
-#~ "ÑËÝÏ ÷É ÈÏÞÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÓÅÒ×ÅÒ ÚÁÇÁÌØÎÏÇÏ ÐÒÉÚÎÁÞÅÎÎÑ (ÄÌÑ\n"
-#~ "ÅÌÅËÔÒÏÎÎϧ ÐÏÛÔÉ, ÐÒÉÎÔ-ÓÅÒ×ÅÒ...).\n"
-#~ "\n"
-#~ "\n"
-#~ "  - åËÓÐÅÒÔ: ñËÝÏ ÷É ×¦ÌØÎÏ ÐÏÞÕ×Á¤ÔÅ × ÓÅÒÅÄÏ×Éݦ GNU/Linux ¦ ÈÏÞÅÔÅ\n"
-#~ "×ÓÔÁÎÏ×ÉÔÉ ÓÉÓÔÅÍÕ, ÔÁË ÑË ÷ÁÍ ÈÏÞÅÔØÓÑ - ÃÅÊ ÓÐÏӦ ÕÓÔÎÏ×ËÉ ÄÌÑ\n"
-#~ "÷ÁÓ. ÷É ÚÍÏÖÅÔÅ ×ÓÔÁÎÏ×ÉÔÉ ÏÐæÀ ×ÉËÏÒÉÓÔÁÎÎÑ ÷ÁÛϧ ÓÉÓÔÅÍÉ, ÑË\n"
-#~ "\"óÐÅæÁÌØÎÅ\""
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "ú×ÁÎÔÁÖÕÀ ÐÁËÅÔÉ ËÒÉÐÔÏÇÒÁƦ§"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "÷ÉÂÅÒ¦ÔØ SCSI"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "õÓÔÁÎÏ×ÏÞÎÉÊ CD Nr %s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "ðÏÎÏצÔØ ÕÓÔÁÎÏ×ÏÞÎÉÊ ÏÂÒÁÚ!\n"
-#~ "\n"
-#~ "ú×ÅÒΦÔØÓÑ ÄÏ ÓÉÓÔÅÍÎÏÇÏ ÁÄͦΦÓÔÒÁÔÏÒÁ, ÁÂÏ ÐÅÒÅ×ÁÎÔÁÖÔÅ ÓÉÓÔÅÍÕ, ÝÏÂ\n"
-#~ "×ËÌÀÞÉÔÉ ËÏÍÐÁËÔ-ÄÉÓË, ÐÏÚÎÁÞÅÎÉÊ \"%s\". îÁÔÉÓΦÔØ çÁÒÁÚÄ, ÑËÝÏ\n"
-#~ "ÚÏÂÒÁÖÅÎÎÑ ÂÕÌÏ ÐÏÎÏ×ÌÅÎÅ, ÁÂÏ ÷¦ÄͦÎÉÔÉ, ÑËÝÏ ÷É ÎÅ ÈÏÞÅÔÅ\n"
-#~ "×ÓÔÁÎÏ×ÌÀ×ÁÔÉ ÐÒÏÇÒÁÍÉ Ú ÏÂÒÁÚÕ ÃØÏÇÏ ËÏÍÐÁËÔ-ÄÉÓËÕ."
-
-#~ msgid "Local LAN"
-#~ msgstr "ìÏËÁÌØÎÁ ÍÅÒÅÖÁ"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "õÓÔÁÎÏ×ÏÞÎÉÊ CD Nr 1"
-
-#~ msgid "developer"
-#~ msgstr "ÒÏÚÒÏÂÎÉË"
-
-#~ msgid "beginner"
-#~ msgstr "ÐÏÞÁÔ˦×ÅÃØ "
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "ì¦Î¦ÊÎÉÊ (ÐÏÔÒ¦ÂÅÎ ÄÌÑ ÄÅÑËÉÈ SCSI ÄÉÓ˦×)"
-
-#~ msgid "linear"
-#~ msgstr "̦ΦÊÎÉÊ"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "ð¦ÓÌÑ %s ЦÄÒÏÚĦÌÕ %s"
-
-#~ msgid "changing type of"
-#~ msgstr "ÚͦÎÁ ÔÉÐÕ "
-
-#~ msgid "resizing"
-#~ msgstr "ÚͦÎÀÀ ÒÏÚͦÒ"
-
-#~ msgid "US Keyboard"
-#~ msgstr "ëÌÁצÁÔÕÒÁ óûá"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "òÏÚͦÒ: %s íÂ"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "ú¦ÐÓÏ×ÁÎÉÊ ÓÔÁÒÔÏ×ÉÊ ÆÁÊÌ %s (ÚÕÐÉÎËÁ ÎÁ %s)"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr ""
-#~ "úÂÉÒÁÀÓÑ ×ÓÔÁÎÏ×ÉÔÉ %d íÂ. ÷É ÍÏÖÅÔÅ ÄÏÄÁÔËÏ×Ï ×ÓÔÁÎÏ×ÉÔÉ ¦ÎÛ¦ ÐÒÏÇÒÁÍÉ."
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "÷ÉÂÒÁÎÏ ÚÁÎÁÄÔÏ ÂÁÇÁÔÏ ÐÁËÅÔ¦×: %dí ÎÅ ÐÏͦÝÁÀÔØÓÑ × %díÂ"
-
-#~ msgid "User name:"
-#~ msgstr "¶Í'Ñ ËÏÒÉÓÔÕ×ÁÞÁ:"
-
-#~ msgid "Password:"
-#~ msgstr "ðÁÒÏÌØ:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "îÅ ÍÏÖÕ ÓÔ×ÏÒÉÔÉ ÓÉÓÔÅÍÎÕ ÄÉÓËÅÔÕ HPT.\n"
-#~ "÷É ÍÏÖÅÔÅ ÓÐÒÏÂÕ×ÁÔÉ ÐÅÒÅÚÁÐÕÓÔÉÔÉ ÕÓÔÁÎÏ×ËÕ ¦ ÚÁÄÁÔÉ ÐÁÒÁÍÅÔÒ ``%s''"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "ðÏÔÒ¦ÂÎÏ ÐÅÒÅÚÁÐÕÓÔÉÔÉ ÕÓÔÁÎÏ×ËÕ Ú ÎÏ×ÉÍÉ ÐÁÒÁÍÅÔÒÁÍÉ"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "ðÒÏÃÅÓ ÕÓÔÁÎÏ×ËÉ ÎÅÏÂȦÄÎÏ ÐÅÒÅÚÁÐÕÓÔÉÔÉ ÚÁ×ÁÎÔÁÖÉ×ÛÉÓØ Ú ÄÉÓËÅÔÉ"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "÷ÓÔÁ×ÔÅ ÄÉÓËÅÔÕ ÄÌÑ ÓÔ×ÏÒÅÎÎÑ ÄÉÓËÅÔÉ ÄÌÑ ÚÁ×ÁÎÔÁÖÅÎÎÑ Ú HTP\n"
-#~ "÷Ó¦ ÄÁΦ ÎÁ Ã¦Ê ÄÉÓËÅÔ¦ ÂÕÄÕÔØ ×ÔÒÁÞÅΦ"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "ì¦ÎÁËÓ ÝÅ ÎÅ ÐÏ×ΦÓÔÀ ЦÄÔÒÉÍÕ¤ ultra dma 66.\n"
-#~ "ñË ÔÉÍÞÁÓÏ×Å Ò¦ÛÅÎÎÑ Ñ ÍÏÖÕ ÓÔ×ÏÒÉÔÉ ÓÐÅæÁÌØÎÕ ÄÉÓËÅÔÕ, ÝÏ\n"
-#~ "ÚÁÂÅÚÐÅÞÉÔØ ÄÏÓÔÕÐ ÄÏ IDE ÄÉÓË¦× ÎÁ ide2 ÔÁ ide3"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "ðÕÎËÔ %s ×ÖÅ ¦ÓÎÕ¤"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "÷ÉÂ¦Ò ÕÓÔÁÎÏ×ËÁ/ÐÏÎÏ×ÌÅÎÎÑ"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "ñËÅ ×ÉËÏÒÉÓÔÁÎÎÑ ÷É ×ÉÂÉÒÁ¤ÔÅ?"
-
-#~ msgid "Logitech MouseMan/FirstMouse (ps/2)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ps/2)"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (serial)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (serial)"
diff --git a/perl-install/share/po/validate.pl b/perl-install/share/po/validate.pl
deleted file mode 100755
index e2383ba9e..000000000
--- a/perl-install/share/po/validate.pl
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/usr/bin/perl -w
-
-#
-# Guillaume Cottenceau (gc@mandrakesoft.com)
-#
-# Copyright 2000 MandrakeSoft
-#
-# This software may be freely redistributed under the terms of the GNU
-# public license.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-# Tool to avoid common grammar errors in po files.
-
-
-sub get_file($)
-{
-    local *FIL;
-    open FIL, "$_[0]" or die "Can't open $_[0]";
-    my @file_content = <FIL>;
-    close FIL;
-    my @out;
-    my $msgstr = 0;
-    my $line_number = 0;
-    foreach (@file_content)
-    {
-	$line_number++;
-	/msgid/ and $msgstr = 0;
-	/msgstr/ and $msgstr = 1;
-	$msgstr and push @out, sprintf("%4d ", $line_number).$_;
-    }
-    @out;
-}
-
-
-my $line_number = 0;
-
-# --- Problems potentially common to multiple languages
-
-sub mixed_case($)
-{
-    (/[\^ ][A-Z][A-Z][a-z]/ && !/XFree/ || /[\^ ][a-z][A-Z]/) and print("**.po possible-mixed-case         $_");
-}
-
-sub uppercase_after_comma($)
-{
-    /, [A-Z]/ and print("**.po uppercase-after-comma       $_");
-}
-
-sub lowercase_after_dot($)
-{
-    /\. [a-z]/ and print("**.po lowercase-after-dot         $_");
-}
-
-sub no_space_after_simple_ponct($)
-{
-    /[a-zA-Z\.]+@[a-zA-Z]/ and return;
-    /[,\.][a-zA-Z]/ and print("**.po no-space-after-simple-ponct $_");
-}
-
-sub space_before_simple_ponct($)
-{
-    / \.\./ and return;
-    / [,\.]/ and print("**.po space-before-simple-ponct   $_");
-}
-
-
-
-# --- fr.po
-
-foreach (get_file("fr.po"))
-{
-    /\s*#/ and next;
-    /ez [^ ]+ez/ and print("fr.po infinitive-form-with-ez     $_");
-    /è[ \.,;:]/ and  print("fr.po grave-accent-at-end-of-word $_");
-    (/[éêè][éêè]/ && !/créé/) and print("fr.po strange-accents-succession  $_");
-    /G[nN][uU]\/[lL]inux/ and print("fr.po GNU-slash-Linux-found       $_");
-    mixed_case($_);
-    uppercase_after_comma($_);
-    lowercase_after_dot($_);
-    no_space_after_simple_ponct($_);
-    space_before_simple_ponct($_);
-}
diff --git a/perl-install/share/po/vi.po b/perl-install/share/po/vi.po
deleted file mode 100644
index 88a1f3ac8..000000000
--- a/perl-install/share/po/vi.po
+++ /dev/null
@@ -1,14002 +0,0 @@
-# Drake X  in Vietnamese.
-# Copyright (C) 2001 Free Software Foundation, Inc.
-# T.M.THANH <tmthanh@yahoo.com>, 2001-2002.
-# Nguyen Hung Vu <hung@vnlinux.org>, 2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-03-14 22:34+0100\n"
-"Last-Translator: Trinh Minh Thanh <tmthanh@yahoo.com>\n"
-"Language-Team: Vietnamese Team\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=tcvn-5712\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "CÊu h×nh ®éc lËp toµn bé c¸c head"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Dïng Xinerama më réng"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "ChØ cÊu h×nh card \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "CÊu h×nh Multi-head"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"HÖ thèng cña b¹n hç trî cÊu h×nh Multi-head.\n"
-"B¹n muèn lµm g×?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Card ®å häa"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Chän card ®å häa"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Chän X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Chän X driver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X driver"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "B¹n muèn cã cÊu h×nh XFree nµo?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Card cña b¹n cã thÓ cã hç trî phÇn cøng t¨ng tèc 3D nh­ng chØ víi XFree %s.\n"
-"Card nµy ®­îc hç trî bëi XFree %s, lo¹i cã thÓ hç trî tèt h¬n khi dïng 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Card cña b¹n cã thÓ cã hç trî phÇn cøng t¨ng tèc 3D víi XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s víi phÇn cøng t¨ng tèc 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Card cña b¹n cã thÓ cã hç trî phÇn cøng t¨ng tèc 3D víi XFree %s,\n"
-"L­u ý ®©y lµ hç trî cã tÝnh lý thuyÕt nªn nã cã thÓ lµm × m¸y tÝnh cña b¹n."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s víi phÇn cøng t¨ng tèc 3D thö nghiÖm"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Card cña b¹n cã thÓ cã hç trî phÇn cøng t¨ng tèc 3D nh­ng chØ víi XFree %s,\n"
-"L­u ý ®©y lµ hç trî cã tÝnh lý thuyÕt nªn nã cã thÓ lµm × m¸y tÝnh cña b¹n.\n"
-"Card nµy ®­îc hç trî bëi XFree %s, lo¹i cã thÓ hç trî tèt h¬n khi dïng 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (cµi ®Æt driver hiÓn thÞ)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "CÊu h×nh XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Chän dung l­îng bé nhí cña card ®å häa"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Chän tïy biÕn cho server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Chän monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Hai th«ng sè quan träng lµ tÇn sè quÐt däc, ®©y lµ th«ng sè\n"
-"®Ó toµn bé mµn h×nh ®­îc lµm t­¬i, vµ quan träng nhÊt lµ tÇn sè \n"
-"quÐt ngang, lµ th«ng sè ®Ó hiÓn thÞ dßng quÐt.\n"
-"\n"
-"Quan träng lµ b¹n kh«ng ®Þnh râ lo¹i mµn h×nh cã th«ng sè thÝch hîp,\n"
-"do vËy v­ît qu¸ kh¶ n¨ng cña mµn h×nh: B¹n cã thÓ lµm háng mµn h×nh.\n"
-" NÕu kh«ng râ, h·y chän mét thiÕt lËp võa ph¶i."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "TÇn sè quÐt ngang"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "TÇn sè quÐt däc"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor ch­a ®­îc cÊu h×nh"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Card ®å häa vÉn ch­a ®­îc cÊu h×nh"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "§é ph©n gi¶i vÉn ch­a ®­îc chän"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "B¹n cã muèn ch¹y thö cÊu h×nh nµy?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Chó ý: thö card ®å ho¹ nµy cã thÓ lµm × m¸y tÝnh cña b¹n"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Ch¹y thö cÊu h×nh nµy"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"h·y thö thay ®æi mét vµi th«ng sè"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "X¶y ra lçi:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Tho¸t ra sau %d gi©y"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "ThiÕt lËp nµy ®· ®óng ch­a?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "BÞ lçi, h·y thö thay ®æi mét vµi th«ng sè"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "§é ph©n gi¶i"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Chän ®é ph©n gi¶i vµ ®é s©u cña mµu"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Card ®å häa: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Thªm"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "ChÕ ®é Chuyªn gia"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "HiÓn thÞ toµn bé"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "§é ph©n gi¶i"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tæ chøc bµn phÝm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Lo¹i chuét: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "ThiÕt bÞ chuét: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "TÇn sè quÐt ngang: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "TÇn sè quÐt däc: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Card ®å ho¹: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "NhËn d¹ng card ®å ho¹: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Bé nhí ®å häa: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "§é s©u mµu: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "§é ph©n gi¶i: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "ChuÈn bÞ cÊu h×nh X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "B¹n muèn lµm g×?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Thay ®æi Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Thay ®æi Card §å häa"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Thay ®æi c¸c tïy chän cña Server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Thay ®æi ®é ph©n gi¶i"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "HiÓn thÞ th«ng tin"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Thö l¹i"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Tho¸t"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Gi÷ l¹i c¸c thay ®æi?\n"
-"CÊu h×nh hiÖn thêi:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X khi khëi ®éng"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Cã thÓ ®Æt chÕ ®é khëi ®éng tù ®éng vµo chÕ ®é ®å häa.\n"
-"B¹n cã muèn ch¹y chÕ ®é X (®å häa) khi khëi ®éng l¹i?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "H·y ®¨ng nhËp l¹i vµo %s ®Ó thay ®æi cã t¸c dông"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "H·y tho¸t ra råi dïng Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 mµu (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ngh×n mµu (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ngh×n mµu (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 triÖu mµu (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 tû mµu (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB trë lªn"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA ChuÈn, 640x480 t¹i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "VGA cao cÊp, 800x600 t¹i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "T­¬ng thÝch víi 8514, 1024x768 t¹i 87 Hz kÕt hîp (kh«ng cã 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "VGA cao cÊp, 1024x768 t¹i 87 Hz kÕt hîp, 800x600 t¹i 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "VGA cao cÊp më réng, 800x600 t¹i 60 Hz, 640x480 t¹i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA kh«ng kÕt hîp, 1024x768 t¹i 60 Hz, 800x600 t¹i 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA tÇn sè cao, 1024x768 t¹i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "§a tÇn, cã thÓ cho phÐp 1280x1024 t¹i 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "§a tÇn cã thÓ cho phÐp 1280x1024 t¹i 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "§a tÇn cã thÓ cho phÐp 1280x1024 t¹i 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor cã thÓ cho phÐp 1600x1200 t¹i 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor cã thÓ cho phÐp 1600x1200 t¹i 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Sector ®Çu tiªn cña ph©n vïng khëi ®éng"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Sector ®Çu tiªn cña ®Üa (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Cµi ®Æt SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "B¹n muèn cµi ®Æt tr×nh khëi ®éng vµo ®©u?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Cµi ®Æt LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO víi menu d¹ng v¨n b¶n"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO víi menu ®å ho¹"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Khëi ®éng tõ DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Tïy chän chÝnh cña tr×nh khëi ®éng"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Dïng tr×nh khëi ®éng"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Cµi ®Æt tr×nh khëi ®éng"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "ThiÕt bÞ khëi ®éng"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (kh«ng lµm viÖc víi c¸c BIOS cò)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "§ång ý"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "§ång ý"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "ChÕ ®é Video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Thêi gian trÔ tr­íc khi khëi ®éng ¶nh mÆc ®Þnh"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "NhËp mËt khÈu"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "NhËp l¹i mËt khÈu"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Tïy chän dßng lÖnh h¹n chÕ"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "h¹n chÕ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Xãa /tmp mçi khi khëi ®éng"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Cho biÕt râ dung l­îng RAM (cã %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Cho phÐp ®a lý lÞch"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "HiÓn thÞ dung l­îng RAM theo MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Tuú chän ``Tïy chän dßng lÖnh h¹n chÕ'' nghÜa lµ kh«ng cho sö dông nÕu kh«ng "
-"cã mËt khÈu"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "H·y thö l¹i"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "MËt khÈu kh«ng khíp nhau"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Th«ng ®iÖp cña Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Thêi gian chê khëi ®éng Kernel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Cho phÐp khëi ®éng tõ CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Cho phÐp khëi ®éng OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "HÖ ®iÒu hµnh mÆc ®Þnh nµo?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"B¹n ®· quyÕt ®Þnh cµi ®Æt tr×nh n¹p khëi ®éng lªn\n"
-"mét ph©n vïng. Nh­ vËy cã nghÜa lµ æ ®Üa khëi ®éng ®· cã mét tr×nh n¹p khëi "
-"®éng råi (vd: System Commander).\n"
-"\n"
-"B¹n ®ang khëi ®éng tõ æ nµo ?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"§©y lµ c¸c môc nhËp kh¸c nhau.\n"
-"B¹n cã thÓ thªm hoÆc thay ®æi c¸c môc hiÖn thêi."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Thªm"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hoµn thµnh"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Thay ®æi"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "B¹n muèn thªm kiÓu môc nhËp nµo?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "HÖ ®iÒu hµnh kh¸c (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "HÖ ®iÒu hµnh kh¸c (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "HÖ ®iÒu hµnh kh¸c (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "¶nh"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Bæ xung"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "§äc-Ghi"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "B¶ng ghi"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Kh«ng an toµn"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Nh·n"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "MÆc ®Þnh"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Kh«ng cã Video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Bá môc nhËp "
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Kh«ng ®­îc ®Ó nh·n trèng"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Ph¶i chØ ®Þnh mét ¶nh Kernel"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Ph¶i chØ ®Þnh mét ph©n vïng root"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Nh·n n·y ®­îc dïng råi"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "T×m thÊy giao diÖn %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "B¹n cã giao diÖn kh¸c n÷a kh«ng?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "B¹n cã giao diÖn %s nµo kh«ng?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Kh«ng"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Cã"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Xem th«ng tin phÇn cøng"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "§ang cµi ®Æt driver cho card %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Nªn ch¹y thö driver %s nµo?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Trong mét sè tr­êng hîp, driver %s cÇn thªm th«ng tin ®Ó ho¹t ®éng\n"
-"®óng c¸ch, mÆc dï nã vÉn ho¹t ®éng b×nh th­êng. B¹n cã muèn chØ râ\n"
-"tïy chän thªm cho nã hoÆc ®Ó driver th¨m dß th«ng tin mµ\n"
-"nã cÇn? §«i khi, sù th¨m dß lµm m¸y tÝnh bÞ cña b¹n treo, nh­ng nã sÏ\n"
-"kh«ng g©y h­ háng nµo."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Th¨m dß tù ®éng"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "§Þnh râ tïy chän"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"B©y giê b¹n cã thÓ cung cÊp c¸c tïy chän cña nã tíi module %s.\n"
-"L­u ý: bÊt kú ®Þa chØ nµo nªn ®­îc nhËp víi prefix 0x vÝ nh­ '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"B©y giê b¹n cã thÓ göi tïy chän ®Õn module %s.\n"
-"Tïy chän cã d¹ng thøc ``tªn=gi¸ trÞ tªn2=gi¸ trÞ2 ...''.\n"
-"VÝ dô, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Tïy chän cña module:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"N¹p module %s kh«ng ®­îc.\n"
-"B¹n cã muèn thö l¹i víi c¸c th«ng sè kh¸c?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "truy cËp tíi c¸c ch­¬ng tr×nh X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "truy cËp tíi c¸c c«ng cô rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "cho phÐp \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "truy cËp tíi c¸c file qu¶n trÞ"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(®· thªm %s råi)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "MËt khÈu nµy ®¬n gi¶n qu¸"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "NhËp tªn ng­êi dïng"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Tªn ng­êi dïng chØ sö dông ch÷ th­êng, sè , `-' vµ `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Tªn ng­êi dïng nµy ®· ®­îc nhËp vµo råi"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Thªm ng­êi dïng"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"NhËp ng­êi dïng\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "ChÊp thuËn ng­êi dïng"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Tªn thËt"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Tªn ng­êi dïng"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "BiÓu t­îng"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "§¨ng nhËp tù ®éng"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Cã thÓ thiÕt lËp khëi ®éng m¸y tù ®éng ®¨ng nhËp mét ng­êi dïng.\n"
-"B¹n cã muèn sö dông tÝnh n¨ng nµy kh«ng?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Chän ng­êi dïng mÆc ®Þnh:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Chän ch¹y tr×nh qu¶n lý window:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "H·y chän mét ng«n ng÷ ®Ó dïng."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "B¹n cã thÓ chän c¸c ng«n ng÷ kh¸c sÎn cã sau khi cµi ®Æt"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Toµn bé"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Cho phÐp mäi ng­êi dïng"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Tïy chØnh"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Kh«ng chia sÎ"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Gãi tin %s cÇn ®­îc cµi ®Æt. B¹n cã muèn cµi ®Æt kh«ng?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Cã thÓ dïng NFS hay SAMBA ®Ó xuÊt ra. Chän c¸i nµo"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "ThiÕu gãi tin b¾t buéc %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Cho phÐp ng­êi dïng xuÊt mét vµi th­ môc trong home cña hä kh«ng?\n"
-"NÕu cho phÐp, ng­êi dïng chØ viÖc nhÊn \"Chia sÎ\" trong Konqueror vµ "
-"Nautilus.\n"
-"\n"
-"\"Tïy chØnh\" cho phÐp mét chuçi ng­êi dïng.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Bá qua"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Ch¹y userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"ViÖc chia sÎ tËp tin sö dông nhãm \"chia sÎ tËp tin\".\n"
-"Cã thÓ dïng userdrake ®Ó thªm ng­êi dïng vµo nhãm nµy."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Chµo mõng c¸c Cracker"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Téi nghiÖp"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "ChuÈn"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Cao"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Cao h¬n"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Hoang t­ëng"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Møc ®é nµy ®­îc dïng víi sù l­u t©m. Nã lµm hÖ thèng dÔ sö dông h¬n,\n"
-"nh­ng dÔ bÞ tæn th­¬ng: kh«ng ®­îc dïng cho m¸y tÝnh nèi m¹ng hoÆc nèi\n"
-"víi Internet. Kh«ng cã truy cËp mËt khÈu."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"B©y giê cho phÐp mËt khÈu, nh­ng sö dông cho mét m¸y nèi m¹ng th× vÉn kh«ng "
-"nªn."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"§©y lµ møc b¶o mËt chuÈn ®­îc khuyÕn c¸o cho m¸y tÝnh sÏ ®­îc nèi víi "
-"Internet theo kiÓu m¸y kh¸ch."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"§· cã mét sè h¹n chÕ vµ c¸c thªm kiÓm tra tù ®éng sÏ ®­îc ch¹y hµng ®ªm."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Víi møc b¶o mËt nµy, cã thÓ sö dông hÖ thèng nµy lµm m¸y chñ. Møc\n"
-"®é b¶o mËt b©y giê ®ñ cao ®Ó sö dông hÖ thèng lµm m¸y chñ, cho phÐp\n"
-"c¸c m¸y kh¸ch kÕt nèi vµo. L­u ý: nÕu m¸y tÝnh nµy chØ lµ mét m¸y kh¸ch trªn "
-"Internet, tèt h¬n lµ b¹n nªn chän møc b¶o mËt thÊp h¬n."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Dùa trªn møc b¶o mËt tr­íc, nh­ng hÖ thèng bÞ ®ãng hoµn toµn.\n"
-"C¸c tÝnh n¨ng b¶o mËt ®ang ë møc tèi ®a."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Chän møc b¶o mËt"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Møc ®é b¶o mËt"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Dïng libsafe cho servers"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Mét th­ viÖn phßng chèng bÞ trµn buffer vµ c¸c cuéc tÊn c«ng chuçi ®Þnh d¹ng."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-" Cha`o mu*`ng chu*o*ng tri`nh cho.n he^. ddie^`u ha`nh %s!\n"
-"\n"
-"Ha~y cho.n he^. ddie^`u ha`nh trong danh sa'ch tre^n hay \n"
-"cho*` %d gia^y dde^? kho*?i ddo^.ng he^. ddie^`u ha`nh ma(.c ddi.nh.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Cha`o mu*`ng chu*o*ng tri`nh cho.n he^. ddie^`u ha`nh GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Du`ng ca'c phi'm %c va` %c dde^? cho.n mu.c nha^.p ddu*o*.c ba^.t s¸ng."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nha^'n Enter dde^? kho*?i ddo^.ng he^. ddie^`u ha`nh ddu*o*.c cho.n, 'e' "
-"dde^? hie^.u chi?nh"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ca'c le^.nh tru*o*'c khi kho*?i ddo^.ng, hoa(.c 'c' cho do`ng le^.nh."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-"Mu.c nha^.p ba^.t sa'ng se~ ddu*o*.c kho*?i ddo^.ng tu*. ddo^.ng sau %d "
-"gia^y."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "kh«ng ®ñ chç ë trong /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Mµn h×nh nÒn"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kh«ng thÓ cµi ®Æt tr×nh khëi ®éng vµo ph©n vïng %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "vÉn ch­a thùc thi trî gióp.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "CÊu h×nh khu«n thøc khëi ®éng"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_TÖp"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/TÖp/_Ra khái"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Mµn h×nh ph©n lo¹i kiÓu míi"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Mµn h×nh kiÓu míi"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Mµn h×nh truyÒn thèng"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Mµn h×nh truyÒn thèng Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ch¹y cùc quang lóc khëi ®éng"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "ChÕ ®é Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "ChÕ ®é Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"HiÖn thêi b¹n ®ang dïng %s lµm Tr×nh Qu¶n Lý Khëi §éng.\n"
-"NhÊn  lªn CÊu h×nh ®Ó ch¹y ®å thuËt cho thiÕt lËp."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "CÊu h×nh"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "ChÕ ®é hÖ thèng"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Ch¹y hÖ thèng X-Window khi khëi ®éng"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "T«i kh«ng muèn ®¨ng nhËp tù ®éng"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "T«i muèn ®¨ng nhËp tù ®éng víi c¸i nµy (ng­êi dïng, mµn h×nh nÒn)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kh«ng thÓ më /etc/inittab ®Ó ®äc: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d phót"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 phót"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d gi©y"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kh«ng thÓ t¹o ¶nh æ ®Üa tr­íc khi ph©n vïng"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "SÏ cã ¶nh sau khi cµi ®Æt trong %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ph¸p"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "BØ"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Czech Republic"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "§øc"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Hy l¹p"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Na uy"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Thôy ®iÓn"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Netherlands"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italy"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "¸o"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Hoa kú"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Tr­íc hÕt, b¹n h·y sao l­u d÷ liÖu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "H·y ®äc kü!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"NÕu b¹n ®Þnh dïng aboot, h·y cÈn thËn ®Ó l¹i mét kh«ng gian trèng (2048 "
-"sector lµ ®ñ)\n"
-"t¹i phÇn ®Çu tiªn cña ®Üa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Lçi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "§å thuËt"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Chän ho¹t ®éng"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"B¹n cã mét ph©n vïng FAT lín\n"
-"(th­êng dïng bëi MicroSoft Dos/Windows).\n"
-"§Çu tiªn, b¹n nªn ®Þnh l¹i ®é lín cña ph©n vïng nµy\n"
-"(nhÊp chuét vµo ®ã, råi nhÊp lªn \"LËp l¹i kÝch th­íc\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "H·y nhÊp chuét lªn ph©n vïng"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Chi tiÕt"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "HÖ thèng file ®­îc ghi nhËt ký"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Trèng"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Kh¸c"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "KiÓu hÖ thèng tËp tin:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "T¹o"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "KiÓu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Dïng ``%s'' thay thÕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Xo¸"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Dïng ``Bá g¾n kÕt'' tr­íc tiªn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Sau khi thay ®æi kiÓu ph©n vïng %s, mäi d÷ liÖu trªn ®ã sÏ mÊt"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Chän mét ph©n vïng"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Chän ph©n vïng kh¸c"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Tho¸t ra"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "ChuyÓn sang chÕ ®é Chuyªn gia"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "ChuyÓn sang chÕ ®é b×nh th­êng"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Kh«ng thùc hiÖn"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "VÉn tiÕp tôc b»ng bÊt cø gi¸ nµo?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Tho¸t mµ kh«ng l­u l¹i"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Tho¸t mµ kh«ng ghi b¶ng ph©n vïng?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "B¹n cã muèn l­u c¸c thay ®æi /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Ph©n chia tù ®éng"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Xo¸ hÕt"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Th«ng tin æ ®Üa cøng"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Toµn bé c¸c ph©n vïng chÝnh ®­îc sö dông"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Kh«ng thÓ thªm ph©n vòng"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"§Ó cã thªm ph©n vïng, h·y xo¸ mét ph©n vïng ®Ó cã thÓ t¹o mét ph©n vïng më "
-"réng"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "L­u b¶ng ph©n vïng"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Kh«i phôc b¶ng ph©n vïng"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "B¶ng ph©n vïng cøu gi¶i"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "N¹p l¹i b¶ng ph©n vïng"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Tù ®éng g¾n kÕt ph­¬ng tiÖn th¸o l¾p"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Chän tËp tin"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"B¶ng ph©n vïng sao l­u kh«ng cã cïng kÝch th­íc\n"
-"VÉn tiÕp tôc?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "C¶nh b¸o"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"N¹p ®Üa mÒm vµo æ\n"
-"Mäi d÷ liÖu trªn ®Üa sÏ bÞ mÊt"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "§ang cè g¾ng cøu b¶ng ph©n vïng"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Th«ng tin chi tiÕt"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "§iÓm g¾n kÕt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Tïy chän"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "§Æt l¹i kÝch th­íc"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "ChuyÓn"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Format"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "G¾n kÕt"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Thªm vµo RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Thªm vµo LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "bá g¾n kÕt"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Gì bá khái RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Gì bá khái LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Thay ®æi RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Dïng cho loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "T¹o ph©n vïng míi"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "B¾t ®Çu sector: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "KÝch th­íc theo MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "KiÓu hÖ thèng tËp tin: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "§iÓm g¾n kÕt:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Tïy thÝch: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Cã gì bá tËp tin loopback kh«ng?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Thay ®æi kiÓu ph©n vïng"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "HÖ thèng tËp tin nµo b¹n muèn?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ChuyÓn tõ ext2 sang ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "B¹n muèn g¾n kÕt tËp tin loopback %s vµo ®©u?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "B¹n muèn g¾n kÕt thiÕt bÞ %s vµo ®©u?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kh«ng thÓ bá thiÕt lËp ®iÓm g¾n kÕt v× ph©n vïng nµy dïng ®Ó loopback.\n"
-"H·y gì bá loopback tr­íc"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "§ang tÝnh to¸n ph¹m vi hÖ thèng tËp tin FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "§ang lËp l¹i kÝch th­íc"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ph©n vïng nµy kh«ng thÓ thiÕt lËp l¹i kÝch th­íc"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Mäi d÷ liÖu trªn ph©n vïng nµy nªn ®­îc sao l­u"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Sau khi lËp l¹i kÝch th­íc ph©n vïng %s, mäi d÷ liÖu trªn ®ã sÏ bÞ mÊt"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Chän kÝch th­íc míi"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "KÝch th­íc míi theo MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "B¹n muèn chuyÓn nã tíi ®Üa nµo?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "B¹n muèn chuyÓn nã tíi sector nµo?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "§ang chuyÓn"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "§ang chuyÓn ph©n vïng..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "H·y chän RAID ®ang tån t¹i ®Ó thªm vµo"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "míi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "H·y chän LVM ®ang tån t¹i ®Ó thªm vµo"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Tªn LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ph©n vïng nµy kh«ng thÓ dïng ®Ó loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Tªn tËp tin loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "§Æt tªn file"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "TËp tin ®· ®­îc loopback kh¸c dïng, h·y chän tËp tin kh¸c"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "TËp tin ®ang tån t¹i. Cã dïng kh«ng?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Tïy chän g¾n kÕt"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Kh¸c nhau"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "thiÕt bÞ"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "Møc ®é"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "KÝch th­íc bã"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "H·y thËn träng: thao t¸c nµy nguy hiÓm."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "KiÓu ph©n vïng nµo?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Xin lçi. Kh«ng chÊp thuËn viÖc t¹o /boot qu¸ møc trªn æ ®Üa (lªn cylinder > "
-"1024).\n"
-"HoÆc b¹n dïng LILO th× nã sÏ kh«ng lµm viÖc, hoÆc b¹n kh«ng dïng LILO th× "
-"kh«ng cÇn /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Ph©n vïng b¹n chän ®Ó thªm lµ root (/) ®­îc ®Þnh vÞ vËt lý v­ît qu¸\n"
-"cylinder thø 1024 cña ®Üa cøng , vµ b¹n kh«ng cã ph©n vïng /boot.\n"
-"NÕu ®Þnh dïng tr×nh khëi ®éng LILO, thËn träng thªm mét ph©n vïng /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Ph©n vïng phÇn mÒm RAID ®­îc chän lµ root (/).\n"
-"Kh«ng cã tr×nh khëi ®éng nµo cã thÓ ®iÒu khiÓn nã nÕu thiÕu ph©n vïng /"
-"boot.\n"
-"V× vËy, h·y thËn träng thªm ph©n vïng /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "B¶ng ph©n vïng cña ®Üa %s s¾p ®­îc ghi lªn ®Üa!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "B¹n cÇn khëi ®éng l¹i tr­íc khi thay ®æi cã t¸c dông"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Sau khi format ph©n vïng %s, mäi d÷ liÖu trªn ph©n vïng nµy sÏ bÞ mÊt"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "§ang format"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "§ang format tËp tin loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "§ang format ph©n vïng %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "C¸c file Èn"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "ChuyÓn c¸c file sang ph©n vïng míi"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Th­ môc %s ®ang chøa mét sè d÷ liÖu\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Di chuyÓn c¸c file sang ph©n vïng míi"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Sao chÐp %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Gì bá %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "b©y giê ph©n vïng %s ®­îc coi lµ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "ThiÕt bÞ:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Tªn æ ®Üa trong DOS: %s (chØ lµ pháng ®o¸n)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "KiÓu:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Tªn:"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "B¾t ®Çu: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "KÝch th­íc: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d ®Õn %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "§· format\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ch­a format\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "§· ®­îc g¾n kÕt\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"TËp tin Loopback:\n"
-"    %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ph©n vïng ®­îc khëi ®éng mÆc ®Þnh\n"
-"    (cho MS-DOS khëi ®éng, kh«ng cho lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "CÊp %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "KÝch th­íc bã %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "æ ®Üa RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Tªn tËp tin Loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"NgÉu nhiªn mµ ph©n vïng nµy lµ\n"
-"mét ph©n vïng cña ®Üa, cã lÏ b¹n nªn\n"
-"®Ó riªng ra.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"§©y lµ ph©n vïng bÉy khëi ®éng\n"
-"®Æc biÖt ®Ó\n"
-"khëi ®éng kÐp hÖ thèng cña b¹n.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "KÝch th­íc: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometry: %s cylinders, %s heads, %s sectors\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Th«ng tin: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "æ ®Üa LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "KiÓu b¶ng ph©n vïng: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "on bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Tïy chän: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Khãa m· hãa hÖ thèng tËp tin"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Chän khãa m· hãa hÖ thèng tËp tin"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Khãa m· hãa nµy ®¬n gi¶n qu¸ ( ph¶i cã ®é dµi Ýt nhÊt %d ký tù)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "C¸c khãa m· hãa kh«ng khíp nhau"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Khãa m· hãa"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Khãa m· ho¸ (nhËp l¹i)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Thay ®æi kiÓu"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "H·y nhÊp chuét lªn mét ph­¬ng tiÖn"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "T×m c¸c m¸y chñ"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "format %s cña %s kh«ng ®­îc"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Kh«ng biÕt c¸ch format %s theo kiÓu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "Kh«ng g¾n kÕt ®­îc ph©n vïng %s vµo th­ môc %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck kh«ng ®­îc víi  exit code %d hay signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Lçi khi ®ang bá g¾n kÕt %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "®¬n gi¶n"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "víi /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Kh«ng thÓ sö dông JFS  cho c¸c ph©n vïng nhá h¬n 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "B¹n kh«ng thÓ dïng ReiserFS  cho c¸c ph©n vïng nhá h¬n 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "§iÓm g¾n kÕt ph¶i b¾t ®Çu víi / ®øng ®Çu"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "§ang cã mét ph©n vïng cã ®iÓm g¾n kÕt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Kh«ng thÓ dïng mét æ lý luËn LVM cho ®iÓm g¾n kÕt %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Th­ môc nµy nªn ®Æt trong hÖ thèng tËp tin root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"B¹n cÇn mét hÖ thèng tËp tin thùc sù (ext2, reiserfs) cho ®iÓm g¾n kÕt nµy\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Kh«ng thÓ dïng mét hÖ thèng file ®· m· hãa cho ®iÓm g¾n kÕt %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Kh«ng ®ñ kh«ng gian trèng ®Ó ph©n chia tù ®éng"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Kh«ng cã g× ®Ó lµm"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Lçi khi më %s ®Ó ghi: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"BÞ lçi - kh«ng t×m thÊy thiÕt bÞ hîp lÖ ®Ó t¹o hÖ thèng tËp tin míi. H·y "
-"kiÓm tra phÇn cøng ®Ó t×m nguyªn nh©n g©y ra lçi"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Kh«ng cã bÊt kú ph©n vïng nµo!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux lµ mét hÖ thèng ®a ng­êi dïng, nã cho phÐp mçi mét ng­êi dïng\n"
-"cã riªng c¸c tïy thÝch, tËp tin vµ v.v.... B¹n cã thÓ ®äc User Guide ®Ó biÕt "
-"thªm\n"
-"®iÒu nµy.Nh­ng kh«ng nh­ Root, lµ ng­êi qu¶n trÞ, c¸c ng­êi dïng mµ b¹n "
-"thªm\n"
-"vµo ®©y sÏ kh«ng ®­îc quyÒn thay ®æi bÊt kú c¸i g× ngoµi c¸c tËp tin vµ cÊu "
-"h×nh\n"
-"cña riªng hä. B¹n sÏ ph¶i t¹o ra mét ng­êi dïng th­êng lÖ cho riªng m×nh.\n"
-"Account ®ã lµ n¬i b¹n nªn dïng ®Ó ®¨ng nhËp cho c«ng viÖc hµng ngµy. MÆc\n"
-"dï b¹n còng cã thÓ ®¨ng nhËp hµng ngµy lµ Root, nh­ng sÏ rÊt nguy hiÓm!\n"
-"ChØ mét lçi nhá nhÊt còng cã thÓ lµm hÖ thèng kh«ng ho¹t ®éng n÷a. NÕu b¹n\n"
-"g©y mét lçi trÇm träng khi lµ ng­êi dïng th«ng th­êng, b¹n cã thÓ chØ mÊt "
-"mét sè\n"
-"th«ng tin mµ kh«ng ¶nh h­ëng tíi toµn bé hÖ thèng.\n"
-"\n"
-"§Çu tiªn, b¹n ph¶i nhËp tªn thËt cña m×nh. §iÒu nµy kh«ng ph¶i b¾t buéc mµ\n"
-"thùc tÕ b¹n cã thÓ nhËp bÊt kú c¸i g× m×nh muèn. Sau ®ã, DrakX sÏ lÊy tõ "
-"®Çu\n"
-"tiªn b¹n nhËp vµo « ®Ó ®em nhËp vµo « \"Tªn Ng­êi Dïng\" (User name). §©y\n"
-"lµ tªn mµ ng­êi dïng nµy sÏ sö dông ®Ó ®¨ng nhËp vµo hÖ thèng. B¹n cã thÓ "
-"thay\n"
-"®æi nã. Sau ®ã b¹n ph¶i nhËp mét mËt khÈu vµo ®©y. MËt khÈu cña ng­êi dïng\n"
-"th«ng th­êng kh«ng cã vai trß quan träng nh­ \"Root\" nh×n trªn quan ®iÓm "
-"b¶o\n"
-"mËt, nh­ng ®õng nªn sao nh·ng nã sau nµy, v× ®ã lµ nguy c¬ ®èi víi c¸c tËp "
-"tin\n"
-"cña b¹n.\n"
-"\n"
-"NÕu nhÊn lªn \"ChÊp thuËn ng­êi dïng\", th× sau ®ã b¹n cã thÓ thªm bao "
-"nhiªu\n"
-"còng ®­îc. Thªm ng­êi dïng cho ng­êi kh¸c: anh chÞ em cña b¹n vv.... Khi ®·\n"
-"thªm xong mäi ng­êi dïng mµ b¹n muèn, h·y chän \"Hoµn thµnh\".\n"
-"\n"
-"NhÊn vµo nót \"N©ng cao\" ®Ó cho phÐp b¹n thay ®æi \"shell\" mÆc ®Þnh cho "
-"ng­êi\n"
-"dïng ®ã (mÆc ®Þnh lµ bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Trªn ®©y lµ danh s¸ch c¸c ph©n vïng Linux hiÖn cã trong æ cøng cña b¹n.\n"
-"B¹n cã thÓ gi÷ c¸c lùa chän do ®å thuËt t¹o ra, chóng thÝch hîp cho hÇu hÕt "
-"c¸c\n"
-"tr­êng hîp th«ng th­êng. NÕu b¹n thay ®æi c¸c lùa chän nµy, Ýt nhÊt ph¶i "
-"®Þnh\n"
-"ra mét ph©n vïng cho root (\"/\"). §õng chän ph©n vïng nµy nhá qu¸ v× b¹n "
-"sÏ\n"
-"kh«ng thÓ cµi ®Æt ®ñ phÇn mÒm. NÕu b¹n muèn ®Æt d÷ liÖu lªn mét ph©n vïng\n"
-"riªng biÖt, b¹n còng cÇn chän  \"/home\" (chØ lµm ®­îc nÕu b¹n cã sÎn h¬n "
-"mét\n"
-"ph©n vïng Linux).\n"
-"\n"
-"VÒ th«ng tin, mçi ph©n vïng ®­îc ghi nh­ sau: \"Tªn\", \"Dung l­îng\".\n"
-"\n"
-"\"Tªn\" cã cÊu tróc nh­ sau: \"kiÓu æ cøng\", \"sè hiÖu æ cøng\",\n"
-"\"sè hiÖu ph©n vïng\" (vÝ dô, \"hda1\").\n"
-"\n"
-"\"KiÓu æ cøng\" lµ \"hd\" nÕu æ cøng cña b¹n lµ IDE vµ \"sd\"\n"
-"nÕu lµ lo¹i SCSI.\n"
-"\n"
-"\"Sè hiÖu æ cøng\" lu«n lµ ch÷ c¸i ®øng sau \"hd\" hoÆc \"sd\". Víi c¸c\n"
-"æ cøng IDE:\n"
-"\n"
-"   * \"a\" lµ \"æ cøng chÝnh nèi víi ®iÒu khiÓn IDE ®Çu tiªn\",\n"
-"\n"
-"   * \"b\" lµ \"æ cøng phô nèi víi ®iÒu khiÓn IDE ®Çu tiªn\",\n"
-"\n"
-"   * \"c\" lµ \"æ cøng chÝnh nèi víi ®iÒu khiÓn IDE thø hai\",\n"
-"\n"
-"   * \"d\" lµ \"æ cøng phô nèi víi ®iÒu khiÓn IDE thø hai\".\n"
-"\n"
-"Víi c¸c æ ®Üa SCSI, \"a\" lµ \"æ cøng ®Çu tiªn\", \"b\" lµ \"æ cøng\n"
-"thø hai\", v.v..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"ViÖc cµi ®Æt Linux Mandrake cÇn vµi ®Üa CDROM. DrakX biÕt chç ®Æt c¸c\n"
-"gãi tin ®­îc chän nÕu trªn mét CDROM kh¸c th× sÏ bá CD hiÖn thêi vµ nh¾c\n"
-"b¹n n¹p mét ®Üa cÇn ®Õn kh¸c vµo."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"B©y giê lµ lóc chØ ®Þnh ch­¬ng tr×nh nµo mµ b¹n muèn cµi ®Æt vµo hÖ thèng.\n"
-"Cã sÎn hµng ngh×n gãi tin dïng cho Mandrake Linux vµ b¹n kh«ng cÇn ph¶i\n"
-"biÕt chóng mét c¸ch t­êng tËn.\n"
-"\n"
-"NÕu thùc hiÖn viÖc cµi ®Æt chuÈn tõ CD-ROM, ®Çu tiªn b¹n sÏ ®­îc ®Ò nghÞ\n"
-"chØ ®Þnh c¸c ®Üa CD b¹n ®ang cã (chØ cã trong chÕ ®é Chuyªn gia). H·y ®¸nh\n"
-"dÊu vµo c¸c nh·n CD vµ ®iÓm s¸ng c¸c hép tïy theo c¸c CD b¹n ®ang cã sÎn\n"
-"cho viÖc cµi ®Æt. NhÊn chuét lªn \"OK\" khi b¹n sÎn sµng ®i tiÕp.\n"
-"\n"
-"C¸c gãi tin ®­îc ph©n lo¹i trong c¸c nhãm tïy theo môc ®Ých sö dông cña m¸y\n"
-"tÝnh nµy. C¸c nhãm ®­îc chia thµnh 4 phÇn:\n"
-"\n"
-" * \"Tr¹m lµm viÖc\": nÕu b¹n ®Þnh thiÕt lËp m¸y nµy thµnh mét tr¹m lµm "
-"viÖc,\n"
-"h·y chän mét hay nhiÒu nhãm t­¬ng øng.\n"
-"\n"
-" * \"Ph¸t triÓn\": nÕu ®Þnh sö dông m¸y nµy ®Ó lËp tr×nh, h·y chän c¸c nhãm\n"
-"mong muèn.\n"
-"\n"
-" * \"M¸y chñ\": nÕu muèn lµm m¸y nµy trë thµnh m¸y chñ, b¹n sÏ cã thÓ\n"
-"chän c¸c dÞch vô th«ng dông nhÊt mµ b¹n muèn thùc hiÖn cµi ®Æt lªn m¸y\n"
-"tÝnh nµy.\n"
-"\n"
-" * \"M«i tr­êng §å häa\": Cuèi cïng th× ®ay lµ n¬i b¹n sÏ thùc hiÖn chän\n"
-"m«i tr­êng ®å häa ­a thÝch. CÇn chän Ýt nhÊt mét m«i tr­êng nÕu b¹n muèn\n"
-"cã mét tr¹m lµm viÖc ®å häa!\n"
-"\n"
-"ViÖc di chuyÓn con trá chuét lªn tªn nhãm  sÏ lµm xuÊt hiÖn mét ®o¹n chó\n"
-"gi¶i ng¾n vÒ nhãm ®ã. NÕu b¹n bá chän toµn bé c¸c nhãm khi thùc hiÖn viÖc\n"
-"cµi ®Æt (®èi lËp víi kiÓu n©ng cÊp), mét hép tho¹i sÏ bËt lªn vµ ®Ò nghÞ c¸c "
-"tïy chän kh¸c nhau cho viÖc cµi ®Æt tèi thiÓu:\n"
-"\n"
-" * \"Cã X\" thùc hiÖn cµi ®Æt Ýt c¸c gãi tin h¬n mµ vÉn cã mét tr¹m lµm "
-"viÖc\n"
-"®å häa;\n"
-"\n"
-" * \"Víi c¸c tµi liÖu c¬ b¶n\" cµi ®Æt mét hÖ thèng c¬ së céng thªm c¸c "
-"tiÖn\n"
-"Ých c¬ b¶n cïng víi tµi liÖu cho chóng. ViÖc cµi ®Æt nµy thÝch hîp ®Ó thiÕt "
-"lËp\n"
-"mét m¸y chñ.\n"
-"\n"
-" * \"Cµi ®Æt thËt tèi thiÓu\" sÏ cµi ®Æt thËt sù tèi thiÓu nh÷ng thø cÇn "
-"thiÕt ®Ó\n"
-"cã mét hÖ thèng Linux lµm viÖc chØ b»ng c¸c dßng lÖnh. KiÓu cµi ®Æt nµy\n"
-"cÇn kho¶ng 65Mb ®Üa trèng.\n"
-"\n"
-"B¹n cã thÓ ®¸nh dÊu vµo hép \"Chän c¸c gãi tin riªng\", viÖc nµy cã Ých nÕu\n"
-"b¹n ®· th«ng thuéc c¸c gãi tin ë trong danh s¸ch hay nÕu b¹n muèn cã quyÒn\n"
-"®iÒu chØnh toµn bé nh÷ng g× ®­îc cµi ®Æt.\n"
-"\n"
-"NÕu b¾t ®Çu thùc hiÖn cµi ®Æt b»ng chÕ ®é \"N©ng cÊp\", b¹n cã thÓ bá chän\n"
-"toµn bé c¸c nhãm ®Ó kh«ng ph¶i cµi ®Æt bÊt kú mét gãi míi nµo. §iÒu nµy cã\n"
-"Ých trong viÖc söa ch÷a hay cËp nhËt cho mét hÖ thèng hiÖn cã."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Cuèi cïng, tïy theo lùa chän cña b¹n lµ cã hay kh«ng chän c¸c gãi tin\n"
-"phô thuéc, b¹n sÏ ®­îc xem mét c©y chøa toµn bé c¸c gãi tin ®­îc ph©n\n"
-"lo¹i theo nhãm vµ d­íi nhãm. Trong khi duyÖt c©y nµy, b¹n cã thÓ chän\n"
-"toµn bé c¸c nhãm, d­íi nhãm, hay c¸c gãi tin riªng.\n"
-"\n"
-"BÊt kú khi nµo b¹n chän mét gãi tin trªn c©y, mét thuyÕt minh sÏ xuÊt\n"
-"hiÖn bªn ph¶i. Khi kÕt thóc lùa chän, nhÊn lªn nót \"Cµi ®Æt\" ®Ó ch¹y\n"
-"tiÕn tr×nh cµi ®Æt. Tïy thuéc vµo tèc ®é cña m¸y tÝnh vµ sè l­îng c¸c\n"
-"gãi tin cÇn ®­îc cµi ®Æt, sÏ cÇn mét kho¶ng thêi gian ®Ó hoµn thµnh\n"
-"toµn bé tiÕn tr×nh. Kho¶nh thêi gian ­íc l­îng ®Ó hoµn thµnh cµi ®Æt\n"
-"®­îc hiÓn thÞ trªn mµn h×nh ®Ó cho b¹n biÕt lµ cã thÓ th­ gi·n víi mét\n"
-"t¸ch cµ phª.\n"
-"\n"
-"!! NÕu c¸c gãi tin cho server ®­îc chän cè t×nh hoÆc do nã lµ thµnh\n"
-"phÇn cña mét nhãm, b¹n sÏ ®­îc hái ®Ó kh¼ng ®Þnh lµ b¹n thËt sù\n"
-"muèn nh÷ng server nµy ®­îc cµi ®Æt. Trong Mandrake Linux, bÊt kú\n"
-"server ®· ®­îc cµi ®Æt nµo ®Òu ch¹y vµo lóc khëi ®éng theo mÆc ®Þnh.\n"
-"ThËm chÝ ®­îc coi lµ an toµn t¹i thêi ®iÓm ph¸t hµnh, nã vÉn cã thÓ\n"
-"cã lç hæng b¶o mËt ®­îc ph¸t hiÖn sau khi ph¸t hµnh phiªn b¶n Linux\n"
-"Mandrake. NÕu kh«ng biÕt mét dÞch vô nµo ®ã ®­îc dïng ®Ó lµm g×\n"
-"hay t¹i sao l¹i ®­îc cµi ®Æt, h·y nhÊn \"Kh«ng\". NhÊn \"Cã\" sÏ cµi\n"
-"®Æt c¸c dÞch vô ®­îc liÖt kª vµ chóng sÏ khëi ch¹y tù ®éng theo mÆc\n"
-"®Þnh. !!\n"
-"\n"
-"Tïy chän \"Tù ®éng chän c¸c phô thuéc\" ®¬n gi¶n lµ ®Ó kh«ng xuÊt\n"
-"hiÖn hép tho¹i c¶nh b¸o khi ch­¬ng tr×nh cµi ®Æt tù ®éng chän gãi tin.\n"
-"ViÖc nµy x¶y ra v× nã thÊy lµ cÇn thiÕt ph¶i lµm tháa m·n sù phô thuéc\n"
-"víi gãi tin kh¸c nh»m môc ®Ýnh hoµn thµnh qu¸ tr×nh cµi ®Æt.\n"
-"\n"
-"BiÓu t­îng ®Üa mÒm nhá n»m ë bªn d­íi danh s¸ch cho phÐp n¹p danh\n"
-"s¸ch c¸c gãi tin ®­îc chän trong lÇn cµi ®Æt tr­íc. NhÊn lªn biÓu t­îng\n"
-"nµy sÏ nh¾c b¹n n¹p ®Üa mÒm ®­îc t¹o tõ lÇn tr­íc, t¹i giai ®o¹n cuèi cña\n"
-"lÇn cµi ®Æt kh¸c. H·y xem lêi khuyªn thø hai cña b­íc cuèi vÒ c¸ch t¹o\n"
-"mét ®Üa mÒm nh­ vËy."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"B©y giê b¹n ®­îc ®Ò nghÞ thiÕt lËp kÕt nèi Internet/m¹ng. NÕu b¹n muèn\n"
-"kÕt nèi m¸y tÝnh nµy víi Internet hay m¹ng lµm viÖc côc bé, h·y nhÊn\n"
-"\"OK\" ®Ó ch¹y ch­¬ng tr×nh dß t×m thiÕt bÞ m¹ng vµ modem. NÕu ph¸t\n"
-"hiÖn kh«ng ®­îc, lÇn sau h·y bá chän hép \"Dïng tù ®éng ph¸t hiÖn\".\n"
-"Còng cã thÓ lµ b¹n kh«ng chän ch¹y cÊu h×nh m¹ng hoÆc muèn lµm sau\n"
-"nµy, chØ viÖc nhÊn lªn nót \"Bá qua\".\n"
-"\n"
-"C¸c kÕt nèi sÎn cã lµ: modem truyÒn thèng, modem ISDN, kÕt nèi ADSL,\n"
-"modem c¸p vµ cuèi cïng lµ kÕt nèi m¹ng côc bé (Ethernet).\n"
-"\n"
-"Chóng t«i kh«ng cung cÊp c¸c cÊu h×nh chi tiÕt ë ®©y. B¹n chØ cÇn ®¶m b¶o\n"
-"lµ cã mäi th«ng sè tõ nhµ cung cÊp dÞch vô Internet hoÆc tõ nhµ qu¶n\n"
-"trÞ hÖ thèng.\n"
-"\n"
-"B¹n cã thÓ tham kh¶o ch­¬ng tµi liÖu vÒ c¸c kÕt nèi Internet ®Ó biÕt thªm "
-"chi\n"
-"chi tiÕt, hay ®¬n gi¶n lµ ®îi cho ®Õn khi hÖ thèng ®­îc cµi ®Æt xong vµ "
-"dïng\n"
-"ch­¬ng tr×nh ®­îc nãi ë ®ã ®Ó cÊu h×nh kÕt nèi.\n"
-"\n"
-"NÕu b¹n muèn thùc hiÖn viÖc cÊu h×nh m¹ng lµm viÖc sau khi cµi ®Æt xong\n"
-"hoÆc lµ b¹n ®· thùc hiÖn xong cÊu h×nh kÕt nèi m¹ng, nhÊn \"Bá qua\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"B©y giê cã thÓ chän khëi ch¹y dÞch vô nµo lóc khëi ®éng (hÖ thèng).\n"
-"\n"
-"§©y lµ toµn bé c¸c dÞch vô sÎn cã ®· ®­îc qu¸ tr×nh cµi ®Æt\n"
-"hiÖn thêi t¹o ra. H·y xem xÐt chóng cÈn thËn vµ bá chän nh÷ng g× kh«ng cÇn\n"
-"®Õn lóc khëi ®éng.\n"
-"\n"
-"B¹n cã thÓ nhËn ®­îc mét ®o¹n chó gi¶i ng¾n vÒ dÞch vô khi chän tõng\n"
-"dÞch vô. NÕu kh«ng biÕt râ dÞch vô ®ã h÷u Ých hay kh«ng, ®Ó an toµn,\n"
-"h·y bá ®ã theo kiÓu mÆc ®Þnh.\n"
-"\n"
-"ThËt thËn träng trong b­íc nµy nÕu b¹n ®Þnh dïng m¸y nµy lµm m¸y\n"
-"chñ: cã thÓ b¹n sÏ kh«ng muèn khëi ch¹y c¸c dÞch vô kh«ng cÇn ®Õn.\n"
-"Nªn nhí lµ mét sè dÞch vô cã thÓ g©y nguy hiÓm khi chóng ®­îc ch¹y\n"
-"trªn m¸y chñ. Nãi chung, chØ chän c¸c dÞch vô thùc sù cÇn thiÕt."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux qu¶n lý thêi gian theo GMT (Greenwich Mean Time) vµ chuyÓn\n"
-"thµnh giê ®Þa ph­¬ng tïy theo mói giê b¹n chän. Tuy vËy, b¹n cã thÓ bÊt\n"
-"ho¹t ®iÒu nµy b»ng viÖc chän \"§ång hå trong m¸y ®Æt theo GMT\" nªn\n"
-"®ång hå trong m¸y gièng nh­ ®ång hå hÑ thèng. ViÖc nµy h÷u Ých khi\n"
-"m¸y tÝnh lµm m¸y chñ cho mét hÖ ®iÒu hµnh kh¸c nh­ lµ Windows.\n"
-"\n"
-"Tïy chän \"Tù ®éng ®ång bé hãa thêi gian\" sÏ tù ®éng ®iÒu chØnh ®ång\n"
-"hå b»ng c¸ch nèi víi mét m¸y chñ thêi gian ë xa trªn Internet. Trong\n"
-"danh s¸ch hiÓn thÞ, h·y chän mét m¸y chñ ë gÇn b¹n. TÊt nhiªn, b¹n\n"
-"ph¶i cã mét kÕt nèi Internet ®Ó cho tÝnh n¨ng nµy ho¹t ®éng. Thùc tÕ\n"
-"lµ nã sÏ cµi ®Æt mét m¸y chñ thêi gian lªn m¸y tÝnh nµy ®Ó c¸c m¸y\n"
-"kh¸c trong m¹ng côc bé tïy ý sö dông."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (HÖ Thèng Cöa Sæ X) lµ h¹t nh©n cña giao diÖn ®å häa GNU/Linux trªn\n"
-"®ã, mäi m«i tr­êng ®å häa (KDE, Gnome, AfterStep, WindowMaker...)\n"
-"®­îc bÖn l¹i víi  Mandrake Linux. Trong phÇn nµy, DrakX sÏ cè g¾ng\n"
-"tù ®éng thùc hiÖn cÊu h×nh X.\n"
-"\n"
-"Nã rÊt hiÕm khi kh«ng thµnh c«ng, chØ trõ khi lµ v× phÇn cøng qu¸ cò (hay\n"
-"qu¸ míi). NÕu thµnh c«ng, nã sÏ khëi ®éng X tù ®éng víi ®é ph©n gi¶i tèt\n"
-"nhÊt trong kh¶ n¨ng cã thÓ ®­îc tïy thuéc vµo kÝch th­íc cña monitor.\n"
-"Sau ®ã, mét cöa sæ sÏ xuÊt hiÖn vµ hái xem b¹n cã nh×n thÊy nã kh«ng.\n"
-"\n"
-"NÕu thùc hiÖn cµi ®Æt kiÓu \"Chuyªn gia\", b¹n sÏ sö dông ®å thuËt cÊu\n"
-"h×nh X. H·y ®äc phÇn t­¬ng øng ë tµi liÖu h­íng dÉn ®Ó biÕt thªm th«ng\n"
-"tin vÒ ®å thuËt nµy.\n"
-"\n"
-"NÕu nh×n thÊy mét th«ng ®iÖp trong lóc ch¹y thö vµ tr¶ lêi \"Cã\", DrakX\n"
-"sÏ thùc hiÖn b­íc tiÕp theo. NÕu kh«ng nh×n thÊy th«ng ®iÖp, th× ®¬n gi¶n\n"
-"lµ v× cÊu h×nh kh«ng ®óng vµ phÐp thö sÏ tù ®éng kÕt thóc sau 10 gi©y, mµn\n"
-"h×nh ®­îc phôc håi l¹i."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"LÇn ®Çu tiªn b¹n ch¹y thö cÊu h×nh X, sù hiÓn thÞ cã thÓ lµm b¹n ch­a\n"
-"tháa m·n (mµn h×nh qu¸ nhá, lÖch ph¶i hoÆc tr¸i...). V× thÕ, thËm\n"
-"chÝ nÕu X khëi ch¹y ®óng, DrakX sÏ hái xem cÊu h×nh ®ã ®· phï hîp\n"
-"víi b¹n ch­a. Nã còng ®Ò xuÊt viÖc thay ®æi b»ng c¸ch hiÓn thÞ mét\n"
-"danh s¸ch c¸c chÕ ®é hîp lÖ vµ sÏ yªu cÇu b¹n chän\n"
-"\n"
-"C¸ch cuèi cïng nÕu nh­ X vÉn kh«ng ch¹y ®­îc, chän \"Thay ®æi\n"
-"card ®å häa\", chän \"Card kh«ng cã trong danh s¸ch\", vµ khi ®­îc\n"
-"nh¾c chän server nµo, chän \"FBDev\". §©y lµ tïy chän an toµn lµm\n"
-"viÖc ®­îc víi bÊt kú card ®å häa nµo. Sau ®ã chän \"Thö l¹i\" ®Ó xem."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Cuèi cïng, b¹n sÏ ®­îc hái xem cã muèn dïng giao diÖn ®å häa vµo lóc\n"
-"khëi ®éng. L­u ý lµ c©u hái nµy sÏ ®­îc hái nÕu b¹n chän kh«ng ch¹y\n"
-"thö cÊu h×nh. HiÓn nhiªn, b¹n muèn tr¶ lêi \"Kh«ng\" nÕu m¸y cña b¹n\n"
-"ho¹t ®éng nh­ mét m¸y chñ, hay nÕu b¹n kh«ng thµnh c«ng trong viÖc\n"
-"cÊu h×nh hiÓn thÞ."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"CDROM cña Mandrake Linux cã chÕ ®é cøu gi¶i. B¹n cã thÓ truy cËp nã b»ng\n"
-"c¸ch khëi ®éng tõ CDROM, nhÊn phÝm >>F1<< vµ gâ  >>rescue<< t¹i dÊu\n"
-"nh¾c. Nh­ng trong tr­êng hîp m¸y tÝnh kh«ng thÓ khëi ®éng tõ CDROM,\n"
-"h·y trë l¹i b­íc nµy ®Ó nhËn sù chØ dÉn trong Ýt nhÊt hai th­êng hîp:\n"
-"\n"
-" * Khi cµi ®Æt tr×nh n¹p khëi ®éng, DrakX sÏ ghi l¹i boot sector (MBR) cña\n"
-"æ ®Üa cøng chÝnh (trõ khi b¹n sö dông mét tr×nh qu¶n lý khëi ®éng kh¸c) do\n"
-"®ã b¹n cã thÓ khëi ch¹y Windows hoÆc GNU/Linux (nÕu hÖ thèng cña b¹n cã\n"
-"cµi ®Æt Windows). NÕu cÇn ph¶i cµi l¹i Windows, qu¸ tr×nh cµi ®Æt Microsoft\n"
-"Windows sÏ ghi l¹i boot sector, vµ nh­ vËy b¹n sÏ kh«ng thÓ khëi ch¹y\n"
-"GNU/Linux!\n"
-"\n"
-" * NÕu gÆp vÊn ®Ò nµy vµ b¹n kh«ng thÓ khëi ch¹y GNU/Linux tõ ®Üa cøng,\n"
-"®Üa mÒm sÏ lµ ph­¬ng tiÖn duy nhÊt ®Ó khëi ch¹y GNU/Linux. Nã chøa\n"
-"mét sè c«ng cô hÖ thèng cÇn thiÕt ®Ó phôc håi l¹i hÖ thèng bÞ háng do sù\n"
-"cè nguån ®iÖn, mét lçi ®¸nh m¸y v« ý, mét lçi gâ phÝm trong mËt khÈu, vµ\n"
-"bÊt kú mét nguyªn do kh¸c.\n"
-"\n"
-"Khi nhÊn chuét vµo b­íc nµy, b¹n sÏ ®­îc yªu cÇu n¹p mét ®Üa mÒm vµo æ.\n"
-"§Üa mÒm nµy ph¶i lµ ®Üa s¹ch hoÆc chØ chøa c¸c d÷ liÖu mµ b¹n kh«ng cÇn\n"
-"n÷a. B¹n sÏ kh«ng ph¶i thùc hiÖn format ®Üa; drakX sÏ ghi l¹i\n"
-"toµn bé ®Üa."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Lóc nµy b¹n cÇn chän n¬i nµo trªn æ cøng sÏ ®­îc cµi ®Æt hÖ ®iÒu hµnh\n"
-"Mandrake Linux. NÕu nh­ æ cøng ch­a cã g× hoÆc nÕu ®· cã mét hÖ\n"
-"®iÒu hµnh ®ang sö dông toµn bé kh«ng gian ®Üa, b¹n cÇn thùc hiÖn viÖc\n"
-"ph©n vïng ®Üa. VÒ c¬ b¶n, viÖc ph©n vïng mét æ ®Üa cøng lµ ph©n chia\n"
-"c¸c æ lý luËn, t¹o kh«ng gian ®Ó cµi ®Æt hÖ thèng Mandrake Linux míi.\n"
-"\n"
-"Do kÕt qu¶ cña qu¸ tr×nh ph©n vïng th­êng kh«ng thay ®æi l¹i ®­îc n÷a,\n"
-"nªn viÖc ph©n vïng cã thÓ g©y sî h·i vµ c¨ng th¼ng nÕu b¹n kh«ng ph¶i\n"
-"ng­êi dïng cã kinh nghiÖm. May thay, ®· cã ®å thuËt ®¬n gi¶n ho¸ viÖc nµy.\n"
-"Tr­íc khi b¾t ®Çu, h·y tham kh¶o tµi liÖu vµ ®õng véi vµng.\n"
-"\n"
-"NÕu thùc hiÖn cµi ®Æt víi chÕ ®é Chuyªn gia, b¹n sÏ thùc hiÖn DiskDrake,\n"
-"mét c«ng cô ph©n vïng cña Mandrake Linux, nã cho phÐp chØnh ®óng\n"
-"c¸c ph©n vïng. Xem ch­¬ng DiskDrake trong tµi liÖu. Tõ giao diÖn cµi ®Æt,\n"
-"b¹n cã thÓ dïng c¸c ®å thuËt ®­îc m« t¶ ë ®©y b»ng c¸ch nhÊp chuét lªn\n"
-"nót \"§å thuËt\" cña hép tho¹i.\n"
-"\n"
-"NÕu c¸c ph©n vïng ®· ®­îc thiÕt lËp, hoÆc lµ tõ lÇn cµi ®Æt tr­íc hay\n"
-"®­îc t¹o ra b»ng mét c«ng cô ph©n vïng kh¸c, ®¬n gi¶n lµ chØ viÖc\n"
-"chän chóng ®Ó cµi ®Æt hÖ thèng Linux.\n"
-"\n"
-"NÕu ch­a cã c¸c ph©n vïng, cÇn ph¶i t¹o chóng b»ng viÖc sö dông ®å\n"
-"thuËt. Tïy thuéc vµo cÊu h×nh cña æ ®Üa cøng, sÎn cã mét sè tïy chän\n"
-"cho b¹n:\n"
-"\n"
-" * \"Dïng kh«ng gian trèng\": tïy chän nµy sÏ tiÕn hµnh tù ®éng viÖc\n"
-"ph©n vïng cho æ ®Üa trèng. B¹n sÏ kh«ng bÞ nh¾c lµ ph¶i lµm g× n÷a.\n"
-"\n"
-" * \"Dïng ph©n vïng hiÖn cã\": ®å thuËt ®· ph¸t hiÖn thÊy mét hoÆc h¬n\n"
-"ph©n vïng Linux hiÖn cã trªn ®Üa cøng. NÕu muèn dïng chóng, h·y chän\n"
-"tïy chän nµy.\n"
-"\n"
-" * \"Dïng kh«ng gian trèng trªn ph©n vïng cña Windows\": nÕu Microsoft\n"
-"Windows ®· ®­îc cµi ®Æt trªn æ cøng vµ dïng toµn bé kh«ng gian ®Üa, cÇn\n"
-"ph¶i t¹o kh«ng gian trèng cho Linux. §Ó lµm viÖc ®ã, cã thÓ xãa bá d÷ liÖu\n"
-"vµ ph©n vïng cña Microsoft Windows (xem gi¶i ph¸p \"Xãa toµn bé ®Üa\" hay\n"
-"\"ChÕ ®é chuyªn gia\") hay lËp l¹i kÝch th­íc ph©n vïng cña MS Windows mµ\n"
-"cã thÓ kh«ng ph¶i mÊt bÊt kú d÷ liÖu nµo. Nªn chän gi¶i ph¸p nµy nÕu muèn\n"
-"dïng c¶ Mandrake Linux vµ Microsoft Windows trªn cïng mét m¸y tÝnh.\n"
-"\n"
-"   Tr­íc khi chän tïy chän nµy, h·y hiÓu lµ sau khi thùc hiÖn c¸ch nµy,\n"
-"kÝch th­íc ph©n vïng cña MS Windows sÏ nhá h¬n so víi lóc nµy.\n"
-"SÏ cã Ýt kh«ng gian trèng h¬n trong Microsoft Windows ®Ó l­u\n"
-"d÷ liÖu vµ cµi ®Æt phÇn mÒm míi.\n"
-"\n"
-" * \"Xãa toµn bé ®Üa\": nÕu muèn xo¸ toµn bé d÷ liÖu vµ c¸c ph©n vïng\n"
-"hiÖn cã trªn æ cøng vµ thay thÕ b»ng hÖ thèng Mandrake Linux míi,\n"
-"h·y dïng tïy chän nµy. H·y thËn träng víi tïy chän nµy v× sÏ kh«ng\n"
-"thÓ thay ®æi lùa chän sau khi ®· kh¼ng ®Þnh.\n"
-"\n"
-"   !! NÕu chän tïy chän nµy, toµn bé d÷ liÖu trªn ®Üa sÏ mÊt. !!\n"
-"\n"
-" * \"Xãa bá Windows\": ®¬n gi¶n lµ sÏ xo¸ s¹ch mäi thø cã trªn\n"
-"®Üa, lµm s¹ch, ph©n vïng tÊt c¶ tõ ®Çu. Mäi d÷ liÖu trªn ®Üa sÏ\n"
-"bÞ mÊt.\n"
-"\n"
-"   !! NÕu chän tïy chän nµy, mäi d÷ liÖu trªn ®Üa sÏ mÊt. !!\n"
-"\n"
-" * \"ChÕ ®é chuyªn gia\": dïng tïy chän nµy khi muèn tù ph©n vïng\n"
-"æ cøng. H·y cÈn thËn - ®©y lµ tïy chän m¹nh nh­ng nguy hiÓm, rÊt\n"
-"dÔ bÞ mÊt mäi d÷ liÖu. V× vËy, kh«ng nªn chän chÕ ®é nµy trõ khi\n"
-"biÕt t­êng tËn mäi thø."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Chóc mõng. ViÖc cµi ®Æt ®· hoµn thµnh vµ hÖ thèng GNU/Linux ®· sÎn sµng\n"
-"®Ó sö dông. H·y nhÊp chuét lªn \"OK\" ®Ó khëi ®éng l¹i hÖ thèng. B¹n cã thÓ\n"
-"ch¹y GNU/Linux hay Windows (nÕu b¹n cã hÖ thèng khëi ®éng kÐp), ngay\n"
-"sau khi m¸y tÝnh khëi ®éng l¹i.\n"
-"\n"
-"Nót \"N©ng cao\" (chØ cã trong chÕ ®é chuyªn gia) hiÓn thÞ thªm 2 nót ®Ó:\n"
-"\n"
-" * \"t¹o ®Üa mÒm tù ®éng cµi ®Æt\": ®Ó t¹o mét ®Üa mÒm cµi ®Æt nhê ®ã\n"
-"sÏ tù ®éng thùc hiÖn toµn bé qu¸ tr×nh cµi ®Æt mµ kh«ng cÇn cã ng­êi\n"
-"thùc hiÖn, gièng hÖt qu¸ tr×nh cµi ®Æt mµ b¹n võa tiÕn hµnh.\n"
-"\n"
-"   L­u ý: sÏ cã 2 tïy chän kh¸c nhau sau khi nhÊp chuét lªn nót:\n"
-"\n"
-"    * \"Thùc hiÖn l¹i\". lµ qu¸ tr×nh cµi ®Æt tù ®éng mét phÇn nh­ b­íc\n"
-"ph©n vïng (vµ chØ c¸i nµy) lµ cßn l¹i t­¬ng t¸c.\n"
-"\n"
-"    * \"Tù ®éng\". Cµi ®Æt hoµn toµn tù ®éng: ®Üa cøng ®­îc ghi l¹i\n"
-"hoµn toµn, mäi d÷ liÖu bÞ mÊt.\n"
-"\n"
-"   TÝnh n¨ng nµy rÊt thuËn tiÖn khi thùc hiÖn cµi ®Æt cho mét sè l­îng\n"
-"lín c¸c m¸y gièng nhau. Xem PhÇn cµi ®Æt tù ®éng t¹i website cña h·ng.\n"
-"\n"
-" * \"L­u c¸c lùa chän gãi tin\"(*) : l­u l¹i sù lùa chän gãi tin ®· ®­îc "
-"t¹o\n"
-"ra tr­íc ®ã. Sau nµy, khi thùc hiÖn lÇn cµi ®Æt kh¸c, h·y n¹p ®·i mÒm vµo\n"
-"æ vµ ch¹y qu¸ tr×nh cµi ®Æt ®i tíi mµn h×nh trî gióp b»ng c¸ch nhÊn phÝm\n"
-"[F1], vµ gâ >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) CÇn mét ®Üa mÒm ®­îc ®Þnh d¹ng FAT (®Ó t¹o nã trong GNU/Linux, gâ\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"BÊt kú ph©n vïng nµo míi ®­îc ho¹ch ®Þnh ®Òu ph¶i format ®Ó dïng\n"
-"(format nghÜa lµ t¹o mét hÖ thèng tËp tin).\n"
-"\n"
-"Vµo lóc nµy, cã thÓ thùc hiÖn format l¹i c¸c ph©n vïng ®· cã ®Ó xãa\n"
-"mäi d÷ liÖu cã trªn chóng. NÕu muèn thùc hiÖn, h·y chän c¸c ph©n\n"
-"vïng nµy.\n"
-"\n"
-"L­u ý lµ kh«ng cÇn thiÕt ph¶i format l¹i mäi ph©n vïng cã tõ tr­íc.\n"
-"B¹n ph¶i format l¹i c¸c ph©n vïng chøa hÖ ®iÒu hµnh nh­ lµ :\n"
-" \"/\", \"/usr\" hay \"/var\") nh­ng kh«ng ph¶i lµm viÖc nµy ®èi víi\n"
-"c¸c ph©n vïng cã d÷ liÖu mµ b¹n muèn gi÷ (®Æc biÖt lµ\n"
-"\"/home\").\n"
-"\n"
-"H·y thËn träng khi chän c¸c ph©n vïng. Sau khi format, mäi d÷ liÖu\n"
-"trªn ®ã sÏ bÞ xãa vµ sÏ kh«ng cã c¸ch nµo ®Ó kh«i phôc l¹i bÊt kú\n"
-"mét c¸i g×.\n"
-"\n"
-"NhÊp chuét lªn \"OK\" khi b¹n ®· sÎn sµng format c¸c ph©n vïng.\n"
-"\n"
-"NhÊn lªn \"Bá qua\" nÕu muèn chän mét ph©n vïng kh¸c cho viÖc\n"
-"cµi ®Æt hÖ ®iÒu hµnh Mandrake Linux míi.\n"
-"\n"
-"NhÊn lªn \"N©ng cao\" nÕu muèn chän c¸c ph©n vïng sÏ ®­îc kiÓm\n"
-"tra c¸c khèi bÞ háng trªn bÒ mÆt ®Üa."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"HÖ ®iÒu hµnh Mandrake Linux míi hiÖn thêi ®ang ®­îc cµi ®Æt.\n"
-"Tïy thuéc vµo sè l­îng c¸c gãi tin sÏ cµi ®Æt vµ tèc ®é m¸y tÝnh cña b¹n\n"
-"mµ qu¸ tr×nh cµi ®Æt cã thÓ sÏ kÐo dµi trong Ýt phót  hoÆc sÏ chiÕm mét "
-"thêi\n"
-"gian ®¸ng kÓ.\n"
-"\n"
-"Xin h·y kiªn nhÉn."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Vµo lóc b¹n ®ang cµi ®Æt Mandrake Linux, cã thÓ ®· cã mét sè gãi tin\n"
-"®· ®­îc cËp nhËt kÓ tõ lóc ph¸t hµnh phiªn b¶n nµy. Mét sè ch­¬ng\n"
-"tr×nh rèi ®· ®­îc gì, lçi b¶o mËt ®­îc söa. §Ó cho b¹n ®­îc h­ëng lîi\n"
-"tõ c¸c cËp nhËt nµy, b©y giê b¹n h·y kÕt nèi Internet ®Ó t¶i chóng vÒ.\n"
-"Chän \"Cã\" nÕu b¹n cã kÕt nèi Intertnet ho¹t ®éng, hay \"Kh«ng\" nÕu\n"
-"b¹n muèn cµi ®Æt c¸c gãi tin cËp nhËt sau nµy.\n"
-"\n"
-"Chän \"Cã\" sÏ hiÓn thÞ danh s¸ch nh÷ng n¬i b¹n cã thÓ lÊy c¸c gãi\n"
-"cËp nhËt. H·y chän n¬i nµo gÇn nhÊt. Sau ®ã, xuÊt hiÖn mét c©y chøa\n"
-"c¸c gãi ®Ó chän: h·y xem l¹i viÖc chän råi nhÊn \"Cµi ®Æt\" ®Ó lÊy vÒ\n"
-"vµ cµi ®Æt hoÆc nhÊn \"Bá qua\" ®Ó hñy bá viÖc cËp nhËt."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Tr­íc khi tiÕp tôc, h·y ®äc kü c¸c ®iÒu kho¶n ®­îc ghi trong b¶n quyÒn.\n"
-"B¶n quyÒn bao trïm lªn toµn bé ph©n phèi Mandrake Linux, nÕu b¹n kh«ng\n"
-"®ång ý víi mäi ®iÒu kho¶n trong ®ã, nhÊn vµo nót \"Tõ chèi\" ®Ó chÊm døt\n"
-"viÖc cµi ®Æt ngay lËp tøc. Muèn tiÕp tôc qu¸ tr×nh cµi ®Æt, nhÊn vµo nót\n"
-"\"ChÊp thuËn\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Vµo lóc nµy, b¹n cã thÓ chän møc ®é b¶o mËt phï hîp víi nhu cÇu\n"
-"cña m¸y tÝnh. Víi mét nguyªn t¾c chñ ®¹o: m¸y cµng bÞ ph¬i bµy bao nhiªu\n"
-"vµ l­u nhiÒu d÷ liÖu bao nhiªu th× møc ®é b¶o mËt cµng ph¶i cao bÊy nhiªu.\n"
-"Tuy nhiªn, møc ®é b¶o mËt cµng cao th× th­êng lµm gi¶m tÝnh dÔ sö dông\n"
-"H·y tham kh¶o ch­¬ng MSEC trong \"Reference Manual\" ®Ó biÕt thªm\n"
-"th«ng tin vÒ ý nghÜa cña c¸c møc b¶o mËt.\n"
-"\n"
-"NÕu kh«ng biÕt ph¶i chän møc ®é nµo, h·y gi÷ tïy chän mÆc ®Þnh."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Vµo lóc nµy, b¹n cÇn chän nh÷ng ph©n vïng nµo sÏ ®­îc dïng ®Ó cµi ®Æt\n"
-"hÖ thèng Mandrake Linux. NÕu c¸c ph©n vïng ®· ®­îc x¸c lËp tõ lÇn cµi\n"
-"®Æt GNU/Linux tr­íc ®ã hay ®­îc t¹o b»ng mét c«ng cô ph©n vïng kh¸c,\n"
-"b¹n cã thÓ dïng chóng. NÕu ch­a cã, b¹n sÏ sÏ ph¶i thùc hiÖn viÖc ho¹ch\n"
-"®Þnh c¸c ph©n vïng.\n"
-"\n"
-"§Ó t¹o c¸c ph©n vïng, ®Çu tiªn ph¶i chän mét æ ®Üa cøng. Cã thÓ chän\n"
-"æ ®Üa ®Ó ph©n vïng b»ng c¸ch nhÊn lªn \"hda\" ®èi víi æ IDE ®Çu tiªn,\n"
-"\"hdb\" cho æ thø hai, \"sda\" ®íi víi æ SCSI ®Çu tiªn vµ cø lµm nh­ vËy.\n"
-"\n"
-"§Ó ph©n vïng cho æ cøng ®­îc chän, cã thÓ dïng nh÷ng tïy chän nµy:\n"
-"\n"
-" * \"Xãa toµn bé\": ®Ó xãa mäi ph©n vïng cã trªn æ ®Üa cøng ®­îc\n"
-"chän.\n"
-"\n"
-" * \"Tù ®éng ph©n chia\": cho phÐp viÖc tù ®éng t¹o c¸c ph©n vïng Ext2\n"
-"vµ swap t¹i kh«ng gian trèng cña æ ®Üa cøng.\n"
-"\n"
-" * \"Thªm\" : cho phÐp thùc hiÖn thªm mét sè tÝnh n¨ng:\n"
-"\n"
-"      * \"L­u b¶ng ph©n vïng\": ®Ó l­u b¶ng ph©n vïng vµo ®Üa mÒm. Cã Ých\n"
-"khi cÇn thùc hiÖn viÖc kh«i phôc l¹i b¶ng ph©n vïng. B¹n rÊt nªn\n"
-"thùc hiÖn b­íc nµy.\n"
-"\n"
-"       * \"Kh«i phôc b¶ng ph©n vïng\": cho phÐp kh«i phôc b¶ng ph©n vïng\n"
-"®· ®­îc l­u vµo ®Üa mÒm tõ tr­íc ®ã.\n"
-"\n"
-"       * \"Cøu gi¶i b¶ng ph©n vïng\": nÕu b¶ng ph©n vïng bÞ h­, b¹n cã thÓ "
-"cè\n"
-"g¾ng kh«i phôc l¹i nã b»ng tïy chän nµy. Xin h·y thËn träng vµ nªn biÕt lµ\n"
-"cã thÓ kh«ng thµnh c«ng.\n"
-"\n"
-"       * \"N¹p l¹i b¶ng ph©n vïng\": bá qua mäi thay ®æi vµ n¹p l¹i b¶ng "
-"ph©n\n"
-"vïng ban ®Çu.\n"
-"\n"
-"       * \"tù ®éng g¾n kÕt ph­¬ng tiÖn th¸o l¾p\": bá chän tïy chän nµy sÏ "
-"Ðp\n"
-"buéc ng­êi dïng ph¶i tù thùc hiÖn g¾n kÕt/bá g¾n kÕt c¸c ph­¬ng tiÖn th¸o\n"
-"l¾p vÝ dô nh­ ®Üa mÒm vµ ®Üa CD.\n"
-"\n"
-" * \"§å thuËt\": dïng tïy chän nµy nÕu b¹n muèn sö dông ®å thuËt ®Ó ph©n "
-"vïng\n"
-"æ ®Üa cøng. B¹n nªn sö dông ®å thuËt nÕu b¹n kh«ng n¾m râ vÒ viÖc\n"
-"ph©n vïng.\n"
-"\n"
-" * \"Hoµn t¸c\": dïng ®Ó bá qua, kh«ng thùc hiÖn nh÷ng thay ®æi võa lµm.\n"
-"\n"
-" * \"ChuyÓn ®æi gi÷a chÕ ®é b×nh th­êng/chuyªn gia\": cung cÊp thªm c¸c "
-"thao\n"
-"t¸c trªn ph©n vïng (kiÓu, tïy chän, ®Þnh d¹ng) vµ thªm th«ng tin.\n"
-"\n"
-" * \"Hoµn thµnh\": khi b¹n ®· thùc hiÖn xong viÖc ph©n vïng æ cøng, nã\n"
-"sÏ l­u c¸c thay ®æi vµo ®Üa.\n"
-"\n"
-"L­u ý: cã thÓ dïng bµn phÝm ®Ó chän c¸c tïy chän. Chän qua l¹i c¸c ph©n\n"
-"vïng b»ng phÝm [Tab] vµ mòi tªn [Lªn/Xuèng].\n"
-"\n"
-"Khi mét ph©n vïng ®· ®­îc chän, cã thÓ dïng:\n"
-"\n"
-" * Ctrl-c ®Ó t¹o mét ph©n vïng míi (khi chän mét ph©n vïng trèng);\n"
-"\n"
-" * Ctrl-d ®Ó xãa mét ph©n vïng;\n"
-"\n"
-" * Ctrl-m ®Ó thiÕt lËp ®iÓm g¾n kÕt.\n"
-"\n"
-"§Ó cã thªm th«ng tin vÒ c¸c lo¹i hÖ thèng tËp tin hiÖn cã, h·y ®äc ch­¬ng\n"
-"ext2fs ë trong ``Tµi liÖu Tham kh¶o''.\n"
-"\n"
-"NÕu ®ang thùc hiÖn cµi ®Æt trªn m¸y PPC, b¹n sÏ muèn t¹o mét ph©n vïng\n"
-"\"bÉy khëi ®éng\" HFS cã kÝch th­íc Ýt nhÊt 1MB ®Ó cho tr×nh n¹p khëi ®éng\n"
-"yaboot dïng. NÕu lËp kÝch th­íc ph©n vïng lín h¬n mét chót (50MB), b¹n\n"
-"sÏ thÊy ®©y lµ n¬i h÷u Ých dïng ®Ó l­u tr÷ kernel dù phßng vµ ¶nh ramdisk\n"
-"cho c¸c tr­êng hîp khëi ®éng khÈn cÊp."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Ph¸t hiÖn ra cã h¬n mét ph©n vïng Microsoft Windows trªn ®Üa cøng.\n"
-"H·y chän mét ph©n vïng cÇn lËp l¹i kÝch th­íc ®Ó cµi ®Æt hÖ ®iÒu\n"
-"hµnh Mandrake Linux míi.\n"
-"\n"
-"Mçi ph©n vïng ®­îc liÖt kª nh­ sau: \"Tªn Linux\", \"Tªn Windows\"\n"
-"\"Dung l­îng\".\n"
-"\n"
-"\"Tªn Linux\" cã cÊu tróc: \"lo¹i æ cøng\", \"sè hiÖu æ cøng\",\n"
-"\"sè hiÖu ph©n vïng\" (vÝ dô, \"hda1\").\n"
-"\n"
-"\"Lo¹i æ cøng\" lµ \"hd\" nÕu æ ®Üa cøng lµ lo¹i IDE vµ\n"
-"\"sd\" nÕu lµ æ cøng SCSI.\n"
-"\n"
-"\"Sè hiÖu æ cøng\" lu«n lµ mét ch÷ ®øng sau \"hd\" hay \"sd\". Víi æ\n"
-"cøng IDE:\n"
-"\n"
-" * \"a\" nghÜa lµ \"æ ®Üa chÝnh nèi víi ®iÒu khiÓn IDE thø nhÊt\",\n"
-"\n"
-" * \"b\" nghÜa lµ \"æ ®Üa phô nèi víi ®iÒu khiÓn IDE thø nhÊt\",\n"
-"\n"
-" * \"c\" nghÜa lµ \"æ ®Üa chÝnh nèi víi ®iÒu khiÓn IDE thø hai\",\n"
-"\n"
-" * \"d\" nghÜa lµ \"æ ®Üa phô nèi víi ®iÒu khiÓn IDE thø hai\".\n"
-"\n"
-"Víi c¸c æ ®Üa SCSI, ch÷ \"a\" nghÜa lµ \"SCSI ID thÊp nhÊt\", \"b\" lµ\n"
-"\"SCSI ID thÊp thø nh×\", v.v...\n"
-"\n"
-"\"Tªn Windows\" lµ ch÷ c¸i g¸n cho æ cøng trong Windows (®Üa\n"
-"cøng hoÆc ph©n vïng ®Çu tiªn lµ \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "H·y kiªn nhÉn. Qu¸ tr×nh nµy thùc hiÖn mÊt vµi phót"
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX cÇn biÕt lµ b¹n muèn thùc hiÖn kiÓu cµi ®Æt mÆc ®Þnh (\"KhuyÕn c¸o\")\n"
-"hay kiÓu cµi ®Æt cã tÝnh ®iÒu khiÓn cao h¬n (\"Chuyªn gia\"). B¹n còng cã "
-"c¶\n"
-"lùa chän thùc hiÖn cµi ®Æt míi hoÆc tiÕn hµnh n©ng cÊp hÖ thèng Mandrake\n"
-"Linux sÎn cã:\n"
-"\n"
-" * \"Cµi ®Æt\": quÐt bá hoµn toµn hÖ thèng cò. Trªn thùc tÕ, tïy thuéc vµo\n"
-"nh÷ng g× ®ang cã trong m¸y mµ b¹n cã thÓ gi÷ l¹i mét sè ph©n vïng (cña\n"
-"Linux hay c¸i kh¸c).\n"
-"\n"
-" * \"N©ng cÊp\": kiÓu cµi ®Æt nµy cho phÐp thùc hiÖn cËp nhËt c¸c gãi tin\n"
-"hiÖn thêi ®· ®­îc cµi ®Æt trong hÖ thèng Mandrake Linux. Nã gi÷ l¹i c¸c\n"
-"ph©n vïng hiÖn thêi trªn ®Üa cøng còng nh­ lµ cÊu h×nh cña ng­êi dïng.\n"
-"Toµn bé c¸c b­íc cÊu h×nh kh¸c vÉn sÎn cã ®Ó thùc hiÖn cµi ®Æt thuÇn tóy.\n"
-"\n"
-" * \"ChØ n©ng cÊp c¸c gãi tin\": kiÓu cµi ®Æt míi nµy cho phÐp n©ng cÊp\n"
-"mét hÖ thèng Mandrake Linux ®ang dïng vµ kh«ng thay ®æi toµn bé cÊu\n"
-"cña h×nh hÖ thèng. Còng cã thÓ bæ xung c¸c gãi tin vµo qu¸ tr×nh cµi ®Æt\n"
-"hiÖn thêi.\n"
-"\n"
-"ViÖc n©ng cÊp lµm viÖc tèt víi c¸c hÖ thèng Mandrake Linux tõ \"8.1\"\n"
-"trë ®i.\n"
-"\n"
-"Tïy thuéc vµo sù hiÓu biÕt cña b¹n vÒ GNU/Linux, h·y chän mét trong\n"
-"nh÷ng lùa chän sau ®©y:\n"
-"\n"
-" * KhuyÕn c¸o: h·y chän nÕu b¹n ch­a bao giê cµi ®Æt hÖ ®iÒu hµnh\n"
-"GNU/Linux. ViÖc cµi ®Æt sÏ rÊt ®¬n gi¶n vµ b¹n chØ ph¶i tr¶ lêi mét\n"
-"sè Ýt c©u hái.\n"
-"\n"
-" * Chuyªn gia: nÕu cã hiÓu biÕt tèt vÒ GNU/Linux, b¹n cã thÓ chän lo¹i\n"
-"cµi ®Æt nµy. ViÖc cµi ®Æt theo chÕ ®é chuyªn gia sÏ cho phÐp thùc hiÖn\n"
-"cµi ®Æt cã tÝnh tïy chØnh cao. ViÖc tr¶ lêi mét sè c©u hái sÏ cã thÓ lµ khã\n"
-"nÕu b¹n kh«ng cã mét kiÕn thøc tèt vÒ GNU/Linux, v× vËy ®õng chän\n"
-"chÕ ®é nµy trõ khi b¹n n¾m râ mäi viÖc."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Th«ng th­êng, DrakX sÏ chän bµn phÝm thÝch hîp (phô thuéc vµo ng«n\n"
-"ng÷ ®· ®­îc chän) vµ thËm chÝ sÏ kh«ng thÊy b­íc nµy. Dï sao, còng cã\n"
-"kh¶ n¨ng lµ bµn phÝm kh«ng t­¬ng øng chÝnh x¸c víi ng«n ng÷ : vÝ dô,\n"
-"b¹n lµ ng­êi Anh nãi tiÕng Thôy sÜ, b¹n vÉn muèn gi÷ bµn phÝm lµ bµn\n"
-"phÝm Thôy sÜ. Hay b¹n nãi tiÕng Anh nh­ng l¹i ®ang ë Quebec, b¹n cã\n"
-"thÓ liªn hÖ theo t×nh huèng t­¬ng tù. Trong c¶ hai tr­êng hîp, b¹n sÏ\n"
-"ph¶i quay l¹i b­íc cµi ®Æt nµy vµ chän mét bµn phÝm thÝch hîp\n"
-"trong danh s¸ch.\n"
-"\n"
-"NhÊp chuét lªn nót \"Thªm\" ®Ó cã mét danh s¸ch ®Çy ®ñ c¸c bµn\n"
-"phÝm ®­îc hç trî."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"H·y chän ng«n ng÷ ­a thÝch ®Ó thùc hiÖn cµi ®Æt vµ dïng trong hÖ thèng.\n"
-"\n"
-"Nót \"N©ng cao\" sÏ cho phÐp lùa chän c¸c ng«n ng÷ kh¸c sÏ ®­îc\n"
-"cµi ®Æt lªn m¸y tr¹m lµm viÖc. ViÖc chän c¸c ng«n ng÷ kh¸c th× c¸c file\n"
-"®Æc tr­ng cho ng«n ng÷ sÏ ®­îc cµi ®Æt giµnh cho tµi liÖu vµ c¸c øng\n"
-"dông. LÊy vÝ dô: b¹n cã mét ng­êi tõ T©y ban nha ®Õn vµ dïng m¸y\n"
-"tÝnh cña b¹n, chän tiÕng Anh lµ ng«n ng÷ chÝnh trong danh s¸ch, vµ\n"
-"trong phÇn N©ng cao, ®¸nh dÊu vµo hép t­¬ng øng víi \"Spanish|Spain\".\n"
-"\n"
-"L­u ý: cã thÓ cµi ®Æt ®a ng«n ng÷. Mét khi ®· chän xong thªm bÊt kú\n"
-"c¸c locale, nhÊn vµo nót \"OK\" ®Ó tiÕp tôc."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Theo mÆc ®Þnh, DrakX cho lµ b¹n cã mét chuét lo¹i 2 nót vµ sÏ thiÕt lËp\n"
-"m« pháng nót thø ba. DrakX sÏ tù ®éng nhËn ra chuét lµ lo¹i PS/2,\n"
-"serial hay USB.\n"
-"\n"
-"NÕu b¹n muèn chØ ®Þnh mét lo¹i chuét kh¸c, h·y chän lo¹i thÝch hîp\n"
-"tõ danh s¸ch.\n"
-"\n"
-"NÕu chän chuét kh¸c víi mÆc ®Þnh, b¹n sÏ nhËn mét mµn h×nh ®Ó\n"
-"ch¹y thö chuét. Sö dông c¸c nót vµ b¸nh xe ®Ó x¸c minh c¸c thiÕt\n"
-"lËp lµ ®óng. NÕu chuét kh«ng ho¹t ®éng ®óng, h·y nhÊn space bar\n"
-"hoÆc Trë L¹i ®Ó  \"Bá qua\" vµ chän l¹i."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"H·y chän ®óng cæng. VÝ dô, cæng COM1 trong Microsoft Windows ®­îc gäi\n"
-"lµ ttyS0 trong GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"§©y lµ thêi ®iÓm chñ chèt nhÊt ®èi víi vÊn ®Ò b¶o mËt cho hÖ thèng Linux:\n"
-"cÇn ph¶i nhËp mét mËt khÈu cho \"root\". \"root\" lµ ng­êi qu¶n trÞ hÖ "
-"thèng,\n"
-"lµ ng­êi duy nhÊt ®­îc phÐp tiÕn hµnh cËp nhËt, thªm ng­êi dïng, thay ®æi\n"
-"toµn bé cÊu h×nh hÖ thèng, v.v... Nãi ng¾n gän lµ \"root\" cã thÓ thùc hiÖn\n"
-"mäi thø! §ã lµ lý do t¹i sao b¹n cÇn chän mét mËt khÈu ph¶i thËt khã ®o¸n;\n"
-"DrakX sÏ th«ng b¸o nÕu nã qu¸ dÔ ®o¸n. Nh­ ®· thÊy, b¹n cã thÓ kh«ng\n"
-"nhËp mËt khÈu, nh­ng chóng t«i khuyªn b¹n rÊt nªn nhËp mËt khÈu, v× mét\n"
-"lý do: ®õng cho r»ng chØ mét m×nh b¹n khëi ®éng Linux th× c¸c hÖ ®iÒu\n"
-"hµnh kh¸c vÉn an toµn khi gÆp lçi. §iÒu ®ã kh«ng ®óng v× \"root\" cã thÓ\n"
-"v­ît qua mäi giíi h¹n vµ v« ý xãa toµn bé d÷ liÖu trªn c¸c ph©n vïng do\n"
-"tù nã truy cËp thiÕu thËn träng! Quan träng lµ ph¶i ®Ó thËt khã kh¨n nÕu\n"
-"muèn trë thµnh \"root\".\n"
-"\n"
-"MËt khÈu nªn pha trén b»ng c¸c ký tù sè vµ ch÷ c¸i vµ cã ®é dµi Ýt nhÊt 8\n"
-"ký tù. Vµ kh«ng nªn ghi mËt khÈu \"root\" vµo ®©u c¶ - ®Ó tr¸nh hÖ thèng.\n"
-"bÞ x©m h¹i\n"
-"\n"
-"§õng nªn dïng mËt khÈu qu¸ dµi hoÆc phøc t¹p ®Ó cho phÐp b¹n cã kh¶\n"
-"n¨ng nhí nã mét c¸ch kh«ng khã kh¨n l¾m.\n"
-"\n"
-"MËt khÈu sÏ kh«ng hiÓn thÞ trªn mµn h×nh khi b¹n nhËp vµo. V× vËy,\n"
-"ph¶i nhËp mËt khÈu hai lÇn ®Ó tr¸nh gÆp lçi khi gâ bµn phÝm\n"
-"NÕu c¶ hai lÇn b¹n ®Òu gâ sai nh­ nhau th× mËt khÈu \"sai\" sÏ\n"
-"®­îc dïng vµo lÇn ®Çu b¹n thùc hiÖn kÕt nèi.\n"
-"\n"
-"Trong chÕ ®é chuyªn gia, b¹n sÏ ®­îc hái khi kÕt nèi víi m¸y chñ\n"
-"chøng thùc, nh­ NIS hoÆc LDAP.\n"
-"\n"
-"NÕu m¹ng lµm viÖc dïng giao thøc LDAP hay NIS ®Ó chøng thùc,\n"
-"h·y chän \"LDAP\" hay \"NIS\". NÕu b¹n kh«ng biÕt râ, h·y hái\n"
-"nhµ qu¶n trÞ hÖ thèng m¹ng.\n"
-"\n"
-"NÕu m¸y tÝnh nµy kh«ng kÕt nèi víi bÊt kú hÖ thèng m¹ng ®­îc qu¶n\n"
-"trÞ nµo, b¹n sÏ chän \"C¸c tËp tin Côc bé\" ®Ó chøng thùc."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO vµ GRUB lµ tr×nh n¹p khëi ®éng cho GNU/Linux. Th«ng th­êng, giai ®o¹n\n"
-"nµy tù ®éng hoµn toµn. Thùc tÕ, DrakX sÏ ph©n tÝch sector khëi ®éng cña ®Üa "
-"vµ\n"
-"thùc hiÖn sao cho phï hîp víi nh÷ng g× t×m thÊy ë ®©y:\n"
-"\n"
-" * nÕu t×m thÊy sector khëi ®éng cña Windows, nã sÏ thay thÕ b»ng sector "
-"khëi\n"
-"®éng cña GRUB/LILO ®Ó cho b¹n cã thÓ khëi ch¹y Linux hoÆc hÖ ®iÒu hµnh\n"
-"kh¸c\n"
-"\n"
-" * nÕu t×m thÊy sector khëi ®éng GRUB hay LILO, nã sÏ thay thÕ b»ng mét c¸i\n"
-"míi;\n"
-"\n"
-"NÕu nghi ngê, DrakX sÏ hiÓn thÞ mét hép tho¹i víi c¸c tïy chän kh¸c nhau.\n"
-"\n"
-" * \"Tr×nh n¹p khëi ®éng ®­îc dïng\": cã ba lùa chän cho b¹n:\n"
-"\n"
-"    * \"GRUB\": nÕu b¹n thÝch dïng GRUB (víi menu d¹ng v¨n b¶n).\n"
-"\n"
-"    * \"LILO víi menu ®å häa\": khi b¹n thÝch dïng LILO víi giao diÖn ®å\n"
-"häa\n"
-"\n"
-"    * \"LILO\" víi menu d¹ng v¨n b¶n: nÕu thÝch dïng LILO víi menu d¹ng v¨n\n"
-"b¶n.\n"
-"\n"
-" * \"ThiÕt bÞ khëi ®éng\": th­êng th× b¹n kh«ng thay ®æi mÆc ®Þnh (\"/dev/hda"
-"\"),\n"
-"nh­ng nÕu thÝch, tr×nh n¹p khëi ®éng cã thÓ ®­îc ghi lªn æ ®Üa cøng thø hai\n"
-"(\"/dev/ hdb\"), hay thËm chÝ trªn ®Üa mÒm (\"/dev/fd0\").\n"
-"\n"
-" * \"Tr× ho·n tr­íc khi n¹p ¶nh mÆc ®Þnh\": khi khëi ®éng l¹i m¸y, ®©y lµ "
-"thêi\n"
-"gian trÔ cho phÐp ®Ó ng­êi dïng cã thÓ chän trªn menu cña tr×nh n¹p khëi "
-"®éng\n"
-"mét môc nhËp khëi ®éng kh¸c víi mÆc ®Þnh.\n"
-"\n"
-"!! Chó ý: nÕu chän kh«ng cµi ®Æt tr×nh n¹p khëi ®éng (b»ng nhÊn \"Bá qua\" "
-"ë\n"
-"®©y), th× ph¶i ®¶m b¶o lµ ®· cã mét c¸ch kh¸c ®Ó khëi ®éng hÖ thèng Linux\n"
-"Mandrake! Còng nªn biÕt ch¾c vÒ viÖc ®ang lµm tr­íc khi thay ®æi bÊt kú tïy\n"
-"chän nµo. !!\n"
-"\n"
-"NhÊn nót \"N©ng cao\" trong hép tho¹i nµy sÏ cã thªm nhiÒu tïy chän n©ng\n"
-"cao ®Ó ®¸p øng cho ng­êi dïng thµnh th¹o.\n"
-"\n"
-"sau khi cÊu h×nh c¸c th«ng sè cña tr×nh n¹p khëi ®éng, mét danh s¸ch cho\n"
-"c¸c tïy chän khëi ®éng sÏ hiÓn thÞ khi khëi ®éng.\n"
-"\n"
-"NÕu nh­ cã mét hÖ ®iÒu hµnh kh¸c ®· ®­îc cµi ®Æt trªn m¸y, nã sÏ tù ®éng\n"
-"®­îc bæ xung vµo menu khëi ®éng. T¹i ®©y, b¹n cã thÓ chän ®óng c¸c tïy\n"
-"chän hiÖn cã. NhÊn ®óp lªn mét môc hiÖn cã sÏ cho phÐp b¹n thay ®æi c¸c\n"
-"th«ng sè hay xãa bá nã. NhÊn nót \"Thªm\" ®Ó t¹o môc nhËp míi; nhÊn nót\n"
-"\"Hoµn thµnh\" ®Ó tiÕp tôc c¸c b­íc cµi ®Æt."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) vµ GRUB lµ c¸c tr×nh qu¶n lý khëi ®éng kh«ng chØ\n"
-"cho GNU/Linux mµ cßn cho c¶ c¸c hÖ ®iÒu hµnh kh¸c trong m¸y tÝnh cña b¹n.\n"
-"Th«ng th­êng, c¸c hÖ ®iÒu hµnh kh¸c ®­îc ph¸t hiÖn chÝnh x¸c vµ ®­îc cµi\n"
-"®Æt. NÕu kh«ng ®­îc nh­ vËy, b¹n cã thÓ nhËp thªm b»ng tay vµo mµn h×nh\n"
-"nµy. H·y thËn träng chän chÝnh x¸c c¸c th«ng sè.\n"
-"\n"
-"B¹n còng cã thÓ kh«ng muèn cho ng­êi kh¸c truy cËp vµo c¸c hÖ ®iÒu hµnh\n"
-"kh¸c nµy, tr­êng hîp nµy b¹n cã thÓ xo¸ c¸c môc nhËp t­¬ng øng. Nh­ng\n"
-"b¹n ph¶i t¹o mét ®Üa khëi ®éng ®Ó khëi ®éng chóng!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"B¹n cÇn ph¶i chØ ra n¬i b¹n muèn ®Æt th«ng tin ®­îc yªu cÇu ®Ó khëi ®éng\n"
-"vµo GNU/Linux.\n"
-"\n"
-"NÕu b¹n biÕt chÝnh x¸c mäi viÖc, h·y chän \"Sector ®Çu tiªn cña ®Üa\n"
-"(MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"T¹i ®©y, chóng ta chän mét hÖ thèng in Ên dïng cho m¸y tÝnh nµy. C¸c hÖ\n"
-"thèng kh¸c cã thÓ chØ cho b¹n chän mét lo¹i, nh­ng Mandrake cã nh÷ng 3.\n"
-"\n"
-" * \"pdq\" - nghÜa lµ ``in, kh«ng xÕp hµng'', lµ mét lùa chän nÕu b¹n cã "
-"mét\n"
-"kÕt nèi trùc tiÕp tíi m¸y in vµ ®iÒu b¹n muèn lµ cã thÓ lo¹i bá hiÖn t­îng "
-"nghÏn\n"
-"m¸y in, vµ b¹n kh«ng cã bÊt kú m¸y in nµo ®­îc nèi m¹ng. Nã sÏ chØ qu¶n\n"
-"lý cho c¸c tr­êng hîp m¹ng ®¬n gi¶n vµ cã phÇn h¬i chËm cho m¹ng. Chän\n"
-"\"pdq\" nÕu ®©y lµ lÇn ®Çu tiªn b¹n sö dông GNU/Linux. Nh­ng cã thÓ chän\n"
-"l¹i sau khi cµi ®Æt b»ng viÖc ch¹y PrinterDrake tõ Trung T©m §iÒu KhiÓn\n"
-"Mandrake vµ nhÊn lªn nót Chuyªn gia.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'' rÊt tuyÖt vêi ®Ó in víi\n"
-"m¸y in côc bé vµ còng lµ mét nöa vßng thÕ giíi. Nã ®¬n gi¶n vµ cã thÓ\n"
-"ho¹t ®éng nh­ mét server hay mét client ®èi víi hÖ thèng in \"lpd\" cò,\n"
-"cho nªn nã t­¬ng thÝch víi c¸c hÖ thèng ®· cã tr­íc ®©y. Nã cã thÓ lµm\n"
-"nhiÒu viÖc, nh­ng thiÕt lËp c¬ b¶n th× l¹i ®¬n gi¶n nh­ lµ \"pdq\". NÕu cÇn\n"
-"nã ®Ó gi¶ lËp mét server \"lpd\", b¹n cÇn ph¶i bËt daemon \"cups-lpd\". Nã\n"
-"cã c¸c front-end ®å häa ®Ó in hoÆc chän c¸c tïy chän cho m¸y in.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. HÖ thèng in nµy cã\n"
-"thÓ thùc hiÖn gÇn nh­ mäi viÖc mµ c¸c hÖ thèng kh¸c lµm ®­îc, nh­ng nã\n"
-"in víi m¸y in kÕt g¾n trªn m¹ng Novell, bëi v× nã hç trî giao thøc IPX, vµ\n"
-"nã cã thÓ in trùc tiÕp tõ c¸c lÖnh shell. NÕu b¹n cÇn cã Novell hoÆc in Ên\n"
-"tíi c¸c lÖnh mµ kh«ng sö dông mét thiÕt lËp pipe riªng rÏ, h·y dïng lprNG.\n"
-"NÕu kh«ng, CUPS lµ mét lùa chän ®­îc ­a thÝch do tÝnh ®¬n gi¶n vµ lµm\n"
-"viÖc tèt h¬n th«ng qua m¹ng."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"B©y giê, DrakX tiÕn hµnh ph¸t hiÖn toµn bé phÇn cøng cã trong m¸y. Nã còng\n"
-"sÏ rµ quÐt c¸c card PCI SCSI cã trªn hÖ thèng. NÕu t×m thÊy card SCSI, "
-"DrakX\n"
-"sÏ tù ®éng cµi ®Æt driver phï hîp.\n"
-"\n"
-"ThØnh tho¶ng trong mét sè tr­êng hîp, viÖc ph¸t hiÖn phÇn cøng kh«ng\n"
-"ph¸t hiÖn ra ®­îc thiÕt bÞ nµo, DrakX sÏ hái ®Ó kh¼ng ®Þnh xem hÖ thèng\n"
-"cã card SCSI kh«ng. H·y nhÊn nót \"Cã\" nÕu trong m¸y cã thiÕt bÞ nµy vµ\n"
-"®Ó hiÓn thÞ danh s¸ch c¸c card SCSI vµ b¹n sÏ chän tõ ®ã. NhÊn lªn nót\n"
-"\"Kh«ng\" nÕu kh«ng cã phÇn cøng SCSI nµo trong m¸y. NÕu kh«ng râ,\n"
-"b¹n cã thÓ kiÓm tra danh s¸ch phÇn cøng trong m¸y b»ng viÖc chän\n"
-"\"Xem th«ng tin phÇn cøng\" vµ nhÊn lªn nót \"OK\" ®Ó quay l¹i phÇn hái\n"
-"vÒ giao diÖn SCSI.\n"
-"\n"
-"NÕu nh­ b¹n ph¶i tù ®Þnh ra adapter, DrakX sÏ hái lµ b¹n cã muèn\n"
-"®Þnh ra c¸c tïy chän cho nã. B¹n nªn cho phÐp DrakX th¨m dß phÇn\n"
-"cøng ®Ó ®­a ra c¸c tïy chän. §iÒu nµy th­êng diÔn ra mét c¸ch tr«i\n"
-"ch¶y.\n"
-"\n"
-"NÕu DrakX kh«ng thÓ th¨m dß ®­îc c¸c tïy chän thÝch hîp, b¹n cÇn\n"
-"ph¶i cung cÊp c¸c tïy chän cho driver. H·y xem l¹i \"User Guide\"\n"
-"(ch­¬ng 3, phÇn \"Collective informations on your hardware\") ®Ó xem\n"
-"gîi ý vÒ c¸c th«ng sè cña phÇn cøng tõ tµi liÖu vÒ phÇn cøng, hoÆctõ\n"
-"web site cña nhµ s¶n xuÊt (nÕu b¹n cã ®­êng truy cËp Internet) hoÆc\n"
-"tõ Microsoft Windows (nÕu b¹n còng ®ang sö dông thiÕt bÞ phÇn cøng\n"
-"nµy víi Windows trong hÖ thèng)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Cã thÓ thªm c¸c môc nhËp cho yaboot, kh«ng chØ cho c¸c hÖ ®iÒu hµnh kh¸c,\n"
-"c¸c kernel lu©n phiªn, mµ cßn cho ¶nh khëi ®éng cÊp cøu.\n"
-"\n"
-"Cho c¸c hÖ ®iÒu hµnh kh¸c - môc nhËp chØ gåm nh·n vµ ph©n vïng root.\n"
-"\n"
-"§èi víi Linux, cã mét sè tïy chän cã thÓ thùc hiÖn: \n"
-"\n"
-" * Nh·n: chØ ®¬n gi¶n lµ tªn sÏ ®­îc gâ t¹i dÊu nh¾c yaboot ®Ó lùa tïy chän "
-"khëi \n"
-"®éng nµy.\n"
-"\n"
-" * ¶nh: lµ tªn cña kernel khëi ®éng.  §iÓn h×nh lµ vmlinux hoÆc c¸c biÕn "
-"thÓ\n"
-"cña vmlinux víi phÇn më réng.\n"
-"\n"
-" * Root: thiÕt bÞ \"root\" hay \"/\" cho viÖc cµi ®Æt Linux.\n"
-"\n"
-" * Bæ sung: trªn phÇn cøng cña Apple, tïy chän bæ sung cho kernel rÊt hay\n"
-"dïng®Ó hç trî cho gi¸ trÞ ban ®Çu cña phÇn cøng video, hoÆc ®Ó m« pháng\n"
-"nót chuét trªn bµn phÝm cho c¸c chuét cña Apple kh«ng cã nót thø hai vµ ba.\n"
-"Sau ®©y lµ mét sè vÝ dô:\n"
-"\n"
-"        video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-" * Initrd: tïy chän nµy dïng ®Ó n¹p c¸c module s¬ khëi, tr­íc khi\n"
-"thiÕt bÞ khëi ®éng ®· sÎn sµng, hay ®Ó n¹p ¶nh ramdisk cho tr­êng hîp\n"
-"khëi ®éng khÈn cÊp.\n"
-"\n"
-" * Initrd-size: kÝch th­íc mÆc ®Þnh cña ramdisk lµ 4096 bytes. NÕu cÇn\n"
-"®Þnh ra mét ramdisk lín th× cã thÓ sö dông tïy chän nµy.\n"
-"\n"
-" * §äc-Ghi: th«ng th­êng ph©n vïng \"root\" s¬ khëi mang thuéc tÝnh chØ "
-"®äc,\n"
-"®Ó cho phÐp mét hÖ thèng tËp tin kiÓm tra tr­íc khi hÖ thèng trë nªn \"ho¹t "
-"®éng\".\n"
-"T¹i ®©y, b¹n cã thÓ ghi ®Ì lªn tïy chän nµy.\n"
-"\n"
-" * Kh«ng cã Video: chøng tá phÇn cøng video cña Apple cã vÊn ®Ò bÊt th­êng,\n"
-"b¹n cã thÓ lùa tïy chän nµy ®Ó khëi ®éng vµo chÕ ®é \"kh«ng cã video\" cã "
-"hç\n"
-"trî cña frame buffer néi t¹i.\n"
-"\n"
-" * MÆc ®Þnh: chän môc nhËp nµy lµ tïy chän mÆc ®Þnh cña Linux,\n"
-"chØ viÖc nhÊn phÝm Enter t¹i dÊu nh¾c cña yaboot.  Môc chän nµy\n"
-"còng sÏ bËt s¸ng víi dÊu \"*\", khi b¹n nhÊn phÝm Tab ®Ó xem c¸c lùa\n"
-"chän khëi ®éng."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot lµ tr×nh khëi ®éng cho m¸y MacIntosh . Nã cã thÓ khëi ®éng\n"
-"®­îc c¶ GNU/Linux, MacOS, hay MacOSX nÕu cã trong m¸y tÝnh\n"
-"Th«ng th­êng, cã c¸c hÖ ®iÒu hµnh kh¸c ®ã ®­îc ph¸t hiÖn vµ cµi ®Æt\n"
-"chÝnh x¸c.Trong tr­êng hîp kh«ng ph¸t hiÖn ®­îc, b¹n cã thÓ tù m×nh\n"
-"thªm vµo b»ng tay t¹i mµn h×nh nµy. Xin cÈn thËn khi chän c¸c tham sè.\n"
-"\n"
-"C¸c tïy chän chÝnh cñaYaboot lµ:\n"
-"\n"
-" * Th«ng ®iÖp s¬ khëi: th«ng ®iÖp d¹ng v¨n b¶n ®­îc hiÓn thÞ tr­íc dÊu nh¾c\n"
-"khëi ®éng.\n"
-"\n"
-" * ThiÕt bÞ Khëi ®éng: ChØ ®Þnh n¬i b¹n muèn ®Æt c¸c th«ng tin ®­îc yªu cÇu "
-"®Ó\n"
-"khëi ®éng vµo GNU/Linux. Nãi chung, b¹n thiÕt lËp mét ph©n vïng bÉy khëi "
-"®éng tr­íc ®Ó gi÷ c¸c th«ng tin nµy.\n"
-"\n"
-" * Open Firmware Delay: Kh¸c víi LILO, cã hai sù trÔ sÎn cã kÌm theo "
-"yaboot.\n"
-"Sù trÔ thø nhÊt ®­îc ®o b»ng gi©y vµ vµo lóc nµy b¹n cã thÓ chän gi÷a CD,\n"
-"OF boot, MacOS, hay Linux.\n"
-"\n"
-" * Thêi gian trÔ khëi ®éng Kernel: sù hÕt thêi gian nµy gièng nh­ thêi gian "
-"trÔ khëi\n"
-"®éng cña LILO. Sau khi chän Linux, b¹n sÏ cã ®­îc 0.1 gi©y tr­íc khi m« t¶ "
-"cña\n"
-"kernel mÆc ®Þnh cña b¹n ®­îc chän.\n"
-"\n"
-" * Cho phÐp khëi ®éng tõ CD?: tïy chän nµy sÏ cho phÐp chän \"C\" cho CD\n"
-"t¹i dÊu nh¾c khëi ®éng ®Çu tiªn.\n"
-"\n"
-" * Cho phÐp khëi ®éng OF?: tïy chän nµy sÏ cho phÐp b¹n chän \"N\" cho Open\n"
-"Firmware t¹i dÊu nh¾c khëi ®éng ®Çu tiªn.\n"
-"\n"
-" * HÖ ®iÒu hµnh mÆc ®Þnh: cã thÓ chän hÖ ®iÒu hµnh nµo sÏ ®­îc khëi ®éng\n"
-"mÆc ®Þnh khi qu¸ thêi gian trÔ cña Open Firmware."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"T¹i ®©y hiÓn thÞ nhiÒu lo¹i th«ng sè liªn quan ®Õn m¸y tÝnh. Tïy thuéc\n"
-"vµo phÇn cøng, b¹n cã thÓ hoÆc kh«ng thÓ xem nh÷ng môc sau:\n"
-"\n"
-" * \"Chuét\": kiÓm tra cÊu h×nh chuét hiÖn thêi vµ nhÊn lªn nót ®Ó\n"
-"thay ®æi nÕu thÊy cÇn thiÕt.\n"
-"\n"
-" * \"Bµn phÝm\": kiÓm tra cÊu h×nh ¸nh x¹ bµn phÝm hiÖn thêi vµ\n"
-"nhÊn nót ®Ó thay ®æi nÕu cÇn.\n"
-"\n"
-" * \"Mói giê\": DrakX, theo mÆc ®Þnh, sÏ ®o¸n mói giê theo ng«n ng÷\n"
-"®­îc chän. Nh­ng l¹i ë ®©y, lµ n¬i chän bµn phÝm, b¹n cã thÓ kh«ng\n"
-"®ang sèng ë quèc gia t­¬ng øng víi ng«n ng÷ ®· chän.\n"
-"V× vËy, b¹n cã thÓ ph¶i nhÊn lªn nót \"Mói giê\" ®Ó cÊu h×nh ®ång hå\n"
-"theo mói giê n¬i b¹n ®ang sèng.\n"
-"\n"
-" * \"M¸y in\": NhÊn nót \"Kh«ng cã M¸y in\" ®Ó më ®å thuËt cÊu h×nh\n"
-"m¸y in.\n"
-"\n"
-" * \"Card ©m thanh\": nÕu card ©m thanh ®­îc ph¸t hiÖn, nã sÏ ®hiÓn thÞ\n"
-"t¹i ®©y. Kh«ng cã kh¶ n¨ng thay ®æi trong lóc cµi ®Æt.\n"
-"\n"
-" * \"Card TV\": nÕu card TV ®­îc ph¸t hiÖn, nã sÏ hiÓn thÞ t¹i ®©y.\n"
-"Kh«ng cã kh¶ n¨ng thay ®æi trong lóc cµi ®Æt.\n"
-"\n"
-" * \"Card ISDN\": nÕu mét card ISDN ®­îc ph¸t hiÖn, nã sÏ hiÓn thÞ\n"
-"t¹i ®©y. Cã thÓ nhÊn lªn nót ®Ó thay ®æi c¸c th«ng sè liªn quan ®Õn\n"
-"card nµy."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"H·y chän æ cøng mµ b¹n muèn xo¸ ®Ó cµi ®Æt ph©n vïng Mandrake Linux\n"
-"míi. H·y thËn träng, mäi d÷ liÖu cã trªn ®ã sÏ bÞ mÊt vµ kh«ng thÓ kh«i\n"
-"phôc l¹i ®­îc."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"NhÊp chuét lªn \"OK\" nÕu b¹n muèn xãa mäi d÷ liÖu vµ c¸c ph©n vïng\n"
-"hiÖn cã trªn æ cøng nµy. H·y thËn träng, sau khi nhÊp chuét lªn \"OK\",\n"
-"b¹n sÏ kh«ng thÓ kh«i phôc d÷ liÖu vµ c¸c ph©n vïng hiÖn cã trªn æ cøng "
-"nµy,\n"
-"kÓ c¶ d÷ liÖu cña Windows.\n"
-"\n"
-"NhÊp chuét lªn \"Bá qua\" ®Ó th«i ch¹y ch­¬ng tr×nh ®Ó kh«ng lµm mÊt\n"
-"bÊt kú d÷ liÖu vµ c¸c ph©n vïng trªn æ ®Üa cøng nµy."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kh«ng thÓ truy cËp c¸c m«-®un kernel t­¬ng øng víi kernel cña b¹n (thiÕu tËp "
-"tin %s), ®¹i kh¸i lµ ®Üa mÒm khëi ®éng kh«ng ®ång bé víi c¸c ph­¬ng tiÖn cµi "
-"®Æt (h·y t¹o mét ®Üa mÒm khëi ®éng míi h¬n)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Còng ph¶i ®Þnh d¹ng %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"B¹n ®· chän c¸c m¸y chñ sau ®©y: %s\n"
-"\n"
-"\n"
-"C¸c m¸y chñ nµy sÏ ®­îc kÝch ho¹t theo mÆc ®Þnh. Chóng kh«ng cã bÊt cø mét "
-"phiªn b¶n ph¸t hµnh b¶o mËt nµo\n"
-", nh­ng mét sè m¸y chñ míi sÏ kh«ng thÓ ®­îc t×m thÊy.Trong tr­êng hîp nh­ "
-"vËy,b¹n ph¶i n©ng cÊp\n"
-"cµng sím cµng tèt.\n"
-"\n"
-"\n"
-"B¹n cã thùc sù muèn cµi ®Æt c¸c m¸y chñ nµy?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kh«ng thÓ dïng ph¸t thanh khi kh«ng cã tªn vïng NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "N¹p mét ®Üa mÒm ®· format vµo æ %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "§Üa mÒm nµy kh«ng ph¶i ®Þnh d¹ng FAT "
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"§Ó sö dông c¸c gãi cøu ch÷a ®· ®­îc l­u, khëi ®éng cµi ®Æt b»ng ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Lçi khi ®äc tËp tin %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Mét sè phÇn cøng cña m¸y tÝnh cÇn c¸c driver ``proprietary'' ®Ó ho¹t ®éng.\n"
-"B¹n cã thÓ t×m th«ng tin vÒ chóng t¹i: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"B¹n ph¶i cã mét ph©n vïng root.\n"
-"Muèn vËy, h·y t¹o mét ph©n vïng (hoÆc nhÊp chuét lªn mét ph©n vïng sÎn cã).\n"
-"Sau ®ã chän ``§iÓm g¾n kÕt'' vµ g¾n nã vµo `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "B¹n ph¶i cã mét ph©n vïng trao ®æi (swap)"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Kh«ng cã ph©n vïng trao ®æi (swap)\n"
-"\n"
-"VÉn tiÕp tôc?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "B¹n ph¶i cã mét ph©n vïng FAT ®­îc kÕt g¸n vµo /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Dïng kh«ng gian trèng"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Kh«ng ®ñ kh«ng gian trèng ®Ó t¹o c¸c ph©n vïng míi"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Dïng ph©n vïng hiÖn thêi"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Kh«ng cã ph©n vïng hiÖn thêi ®Ó dïng"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Dïng ph©n vïng Windows ®Ó loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ph©n vïng nµo b¹n muèn sö dông cho Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Chän kÝch th­íc"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "KÝch th­íc ph©n vïng root theo MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "KÝch th­íc ph©n vïng swap theo MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Dïng kh«ng gian trèng cña ph©n vïng Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "B¹n muèn lËp l¹i kÝch th­íc ph©n vïng nµo?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "§ang tÝnh to¸n ph¹m vi hÖ thèng tËp tin cña Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Sù lËp l¹i kÝch th­íc FAT kh«ng thÓ qu¶n lý ph©n vïng cña b¹n, \n"
-"x¶y ra lçi nh­ sau: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Ph©n vïng Windows bÞ ph©n m¶nh nhiÒu, h·y ch¹y ``defrag'' tr­íc"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"C¶nh B¸o!\n"
-"\n"
-"DrakX sÏ chØnh l¹i kÝch th­íc ph©n vïng Windows. H·y thËn träng:\n"
-"qu¸ tr×nh nµy nguy hiÓm. NÕu vÉn b¹n ch­a hoµn thµnh,\n"
-"tr­íc hÕt h·y tho¸t ra khái qu¸ tr×nh cµi ®Æt, ch¹y ch­¬ng\n"
-"tr×nh kiÓm tra æ ®Üa trong Windows (vµ tèt nhÊt lµ ch¹y\n"
-"c¶ tr×nh dån ®Üa sau ®ã thùc hiÖn l¹i qu¸ tr×nh cµi ®Æt.\n"
-"B¹n còng nªn sao l­u d÷ liÖu.\n"
-"Khi thùc hiÖn xong, nhÊn OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "B¹n muèn gi÷ kÝch th­íc nµo cho Windows"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Ph©n vïng %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Kh«ng thiÕt lËp l¹i ®­îc kÝch th­íc FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Kh«ng cã ph©n vïng FAT nµo ®Ó thiÕt lËp l¹i kÝch th­íc hoÆc ®Ó loopback "
-"(hoÆc kh«ng ®ñ kh«ng gian trèng)."
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Xo¸ toµn bé ®Üa"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Xo¸ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "B¹n cã h¬n mét ®Üa cøng, b¹n cµi ®Æt Linux lªn ®Üa nµo?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Toµn bé c¸c ph©n vïng vµ d÷ liÖu hiÖn cã sÏ bÞ xãa khái æ ®Üa %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Tïy chØnh ph©n vïng ®Üa "
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Dïng fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"B©y giê b¹n cã thÓ ph©n vïng %s.\n"
-"Khi hoµn thµnh, ®õng quªn l­u l¹i b»ng `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "B¹n kh«ng cã ®ñ kh«ng gian trèng trªn ph©n vïng Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Kh«ng t×m ®­îc n¬i cµi ®Æt"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "§å thuËt ph©n vïng cña DrakX t×m ra c¸c gi¶i ph¸p nh­ sau:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Qu¸ tr×nh ph©n vïng háng: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "BËt chøc n¨ng m¹ng"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "T¾t chøc n¨ng m¹ng"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Cã lçi x¶y ra, kh«ng râ c¸ch gi¶i quyÕt thÝch hîp.\n"
-"TiÕp tôc víi rñi ro."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Sao chÐp ®iÓm g¾n kÕt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Mét sè gãi ®· kh«ng ®­îc cµi ®Æt ®óng ®¾n.\n"
-"Cã thÓ do æ ®Üa cdrom hoÆc ®Üa cdrom cña b¹n bÞ lçi.\n"
-"KiÓm tra cdrom trªn m¸y tÝnh b»ng \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Chµo mõng %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Kh«ng cã æ ®Üa mÒm"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "§i vµo giai ®o¹n `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"HÖ thèng cña b¹n cã cÊu h×nh thÊp. B¹n cã thÓ gÆp ph¶i mét sè trôc trÆc khi\n"
-"cµi ®Æt Mandrake Linux. NÕu x¶y ra lçi, b¹n cã thÓ thay thÕ b»ng kiÓu cµi "
-"®Æt trong\n"
-"chÕ ®é v¨n b¶n b»ng c¸ch nhÊn phÝm `F1' khi khëi ®éng tõ CDROM, råi nhËp "
-"`text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "KiÓu cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "H·y chän mét trong c¸c lo¹i cµi ®Æt sau ®©y:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"KÝch th­íc tæng céng cña c¸c nhãm sÏ cµi ®Æt mµ b¹n chän kho¶ng %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"NÕu b¹n muèn cµi ®Æt thÊp h¬n kÝch th­íc nµy,\n"
-"h·y chän tû lÖ phÇn tr¨m cña c¸c gãi mµ b¹n muèn cµi ®Æt.\n"
-"\n"
-"Víi tû lÖ phÇn tr¨m thÊp sÏ chØ cã c¸c gãi quan träng nhÊt ®­îc cµi ®Æt;\n"
-"Víi tû lÖ 100%% sÏ cµi ®Æt toµn bé c¸c gãi ®­îc chän."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Kh«ng gian trªn ®Üa chØ cho phÐp %d%% cña c¸c gãi nµy.\n"
-"\n"
-"NÕu b¹n muèn cµi ®Æt Ýt h¬n tû lÖ nµy, h·y\n"
-"chän tû lÖ phÇn tr¨m c¸c gãi b¹n muèn cµi ®Æt.\n"
-"Víi tû lÖ phÇn tr¨m thÊp sÏ chØ cã c¸c gãi quan träng nhÊt ®­îc cµi ®Æt;\n"
-"Víi tû lÖ %d%% sÏ cµi ®Æt cµng nhiÒu gãi cµng tèt."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "B¹n sÏ cã thÓ chän chóng mét c¸ch cô thÓ h¬n ë b­íc sau."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Tû lÖ phÇn tr¨m c¸c gãi cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Nhãm gãi tin ®­îc chän"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "C¸c gãi riªng ®­îc chän"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "KÝch th­íc toµn bé: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Gãi háng"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Tªn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Phiªn b¶n: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "KÝch th­íc: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Quan träng: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "B¹n kh«ng thÓ chän gãi nµy v× kh«ng cßn ®ñ kh«ng gian ®Ó cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "C¸c gãi sau ®©y sÏ ®­îc cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "C¸c gãi sau ®©y sÏ ®­îc bá ra"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "B¹n kh«ng thÓ chän/bá chän gãi nµy"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Gãi nµy b¾t buéc chän, kh«ng thÓ bá chän nã"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "B¹n kh«ng thÓ bá chän gãi nµy. Nã ®­îc cµi ®Æt råi"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Gãi nµy ph¶i ®­îc n©ng cÊp\n"
-"B¹n cã ch¾n lµ muèn bá chän nã kh«ng?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "B¹n kh«ng thÓ kh«ng chän gãi nµy. Nã ph¶i ®­îc n©ng cÊp."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "HiÓn thÞ c¸c gãi ®­îc chän tù ®éng"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "T¶i/L­u vµo ®Üa mÒm"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "§ang cËp nhËt sù lùa chän c¸c gãi"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Cµi ®Æt tèi thiÓu"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Chän c¸c gãi b¹n muèn cµi ®Æt "
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "§ang cµi ®Æt"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "§ang ­íc l­îng"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Thêi gian cßn l¹i"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "H·y chê, ®ang chuÈn bÞ cµi ®Æt."
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d gãi"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "§ang cµi ®Æt gãi %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "ChÊp thuËn"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Tõ chèi"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"§æi ®Üa CD!\n"
-"\n"
-"H·y n¹p ®Üa CD cã nh·n \"%s\" vµo æ ®Üa råi nhÊn OK khi ®· xong.\n"
-"NÕu b¹n kh«ng cã, nhÊn Bá qua ®Ó kh«ng ch¹y cµi ®Æt tõ ®Üa nµy."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "VÉn cø tiÕp tôc?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Lçi khi ®ang xö lý c¸c gãi:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Lçi khi ®ang cµi ®Æt c¸c gãi:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"C¶nh B¸o\n"
-"\n"
-"H·y ®äc kü c¸c ®iÒu kho¶n d­íi ®©y. NÕu b¹n kh«ng chÊp thuËn víi bÊt\n"
-"cø phÇn nµo, b¹n sÏ kh«ng ®­îc phÐp cµi ®Æt ®Üa CD tiÕp theo. NhÊp vµo\n"
-"'Tõ chèi' ®Ó tiÕp tôc cµi ®Æt vµ kh«ng sö dông c¸c ®Üa nµy.\n"
-"\n"
-"\n"
-"Mét sè thµnh phÇn trong CD tiÕp theo kh«ng tu©n theo \n"
-"GPL License hoÆc t­¬ng tù. Mçi mét thµnh phÇn nµy l¹i \n"
-"tu©n theo c¸c ®iÒu kiÖn vµ ®iÒu kho¶n trong giÊy phÐp riªng cña nã. \n"
-"H·y ®äc kü vµ chÊp thuËn c¸c giÊy phÐp ®i kÌm tr­íc khi b¹n \n"
-"sö dông hoÆc ph©n phèi l¹i c¸c thµnh phÇn ®· ®­îc ®Ò cËp. \n"
-"C¸c giÊy phÐp nµy nãi chung sÏ ng¨n chÆn viÖc trao ®æi, sao \n"
-"chÐp (trõ c¸c môc ®Ých sao l­u dù phßng), ph©n phèi l¹i, ®¶o \n"
-"lén, th¸o rêi, bá biªn dÞch hoÆc thay ®æi thµnh phÇn. \n"
-"BÊt kú mét ph¹m vi chÊp thuËn nµo ®ã còng sÏ giíi h¹n ngay quyÒn \n"
-"cña b¹n bëi giÊy phÐp. Trõ khi lµ c¸c ®iÒu kho¶n trong giÊy phÐp\n"
-"cho b¹n quyÒn, b¹n kh«ng thÓ cµi ®Æt c¸c ch­¬ng tr×nh cho nhiÒu \n"
-"m¸y tÝnh, hoÆc sö dông chóng trªn m¹ng. NÕu cã vÊn ®Ò g× kh«ng \n"
-"râ, h·y liªn hÖ trùc tiÕp víi nhµ ph©n phèi hoÆc ng­êi viÕt ch­¬ng tr×nh. \n"
-"ChuyÓn cho bªn thø ba hoÆc sao chÐp c¸c thµnh phÇn nµy lu«n bÞ \n"
-"ng¨n cÊm.\n"
-"\n"
-"\n"
-"Mäi quyÒn sö dông c¸c thµnh phÇn ë CD tiÕp theo thuéc së h÷u \n"
-"cña c¸c t¸c gi¶ vµ ®­îc b¶o vÖ bëi luËt së h÷u trÝ tuÖ vµ b¶n quyÒn \n"
-"¸p dông cho c¸c ch­¬ng tr×nh phÇn mÒm.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Lçi x¶y ra"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "B¹n thùc sù muèn th«i cµi ®Æt?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "ChÊp thuËn giÊy phÐp"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Giíi ThiÖu\n"
-"\n"
-"HÖ ®iÒu hµnh vµ c¸c thµnh phÇn kh¸c cã trong s¶n phÈm ph©n phèi cña Mandrake "
-"Linux \n"
-"sÏ gäi lµ \"C¸c S¶n PhÈm PhÇn MÒm\" . C¸c S¶n PhÈm PhÇn MÒm bao gåm, nh­ng "
-"kh«ng \n"
-"bÞ giíi h¹n, mét bé c¸c ch­¬ng tr×nh, ph­¬ng ph¸p, quy t¾c vµ tµi liÖu liªn "
-"quan ®Õn hÖ ®iÒu hµnh \n"
-"vµ c¸c thµnh phÇn kh¸c cã trong s¶n phÈm ph©n phèi Mandrake Linux.\n"
-"\n"
-"\n"
-"1. ChÊp ThuËn GiÊy PhÐp\n"
-"\n"
-"H·y ®äc cÈn thËn tµi liÖu nµy. Nã lµ sù chÊp thuËn giÊy phÐp gi÷a b¹n vµ  \n"
-"MandrakeSoft S.A. ®­îc ¸p dông cho c¸c S¶n PhÈm PhÇn MÒm.\n"
-"B»ng viÖc cµi ®Æt, sao chÐp hay sö dông S¶n PhÈm PhÇn MÒm theo c¸ch \n"
-"nµo ®ã th× hiÓn nhiªn b¹n ®ång ý vµ chÊp thuËn toµn bé c¸c ®iÒu kho¶n vµ "
-"®iÒu kiÖn cña giÊy phÐp nµy. \n"
-"NÕu b¹n kh«ng chÊp thuËn bÊt kú mét ®iÒu kho¶n nµo, b¹n kh«ng ®­îc phÐp cµi "
-"®Æt, sao chÐp hay sö dông \n"
-"c¸c S¶n PhÈm PhÇn MÒm. \n"
-"Mäi cè g¾ng cµi ®Æt, sao chÐp hay sö dông S¶n PhÈm PhÇn MÒm nµy theo c¸ch "
-"kh«ng tu©n theo \n"
-"c¸c ®iÒu kho¶n vµ ®iÒu kiÖn trong giÊy phÐp sÏ bÞ cÊm vµ chÊm døt quyÒn cña "
-"b¹n theo giÊy phÐp nµy.\n"
-"B¹n ph¶i xo¸ ngay lËp tøc tÊt c¶ sù sao chÐp c¸c \n"
-"S¶n PhÈm PhÇn MÒm nµy.\n"
-"\n"
-"\n"
-"2. Giíi H¹n B¶o §¶m\n"
-"\n"
-"C¸c s¶n phÈm phÇn mÒm vµ tµi liÖu ®i kÌm ®­îc cung cÊp \"nh­ lµ\", kh«ng cã "
-"sù b¶o ®¶m, theo\n"
-"ph¹m vi cho phÐp cña luËt ph¸p.\n"
-"MandrakeSoft S.A. sÏ tù cã tr¸ch nhiÖm ph¸p lý ë mét møc ®é nµo ®ã vÒ c¸c h­ "
-"háng ¶nh h­ëng tíi c«ng viÖc lµm ¨n.\n"
-"\n"
-"3. GiÊy phÐp GPL vµ c¸c giÊy phÐp liªn quan\n"
-"\n"
-"C¸c S¶n PhÈm PhÇn MÒm gèm cã c¸c phÇn mÒm ®­îc lµm ra bëi c¸c c¸ nh©n vµ tæ "
-"chøc kh¸c nhau.\n"
-"HÇu hÕt c¸c thµnh phÇn nµy ®­îc qu¶n lý bëi c¸c ®iÒu kho¶n vµ ®iÒu kiÖncña "
-"GNU/GPL.\n"
-"sau nµy gäi lµ \"GPL\", hoÆc c¸c giÊy phÐp t­¬ng tù. HÇu hÕt c¸c giÊy phÐp "
-"nµy cho phÐp b¹n sö dông, \n"
-"sao chÐp, chØnh söa l¹i, hoÆc ph©n phèi l¹i c¸c thµnh phÇn mµ nã ®Ò cËp. H·y "
-"®äc ký c¸c ®iÒu kho¶n \n"
-"vµ c¸c ®iÒu kiÖn trong giÊy phÐp cña tõng thµnh phÇn tr­íc khi sö dông "
-"chóng. Mäi c©u hái \n"
-"vÒ giÊy phÐp cña c¸c thµnh phÇn nªn ®­îc göi tíi t¸c gi¶ mµ kh«ng göi tíi "
-"MandrakeSoft.\n"
-"C¸c ch­¬ng tr×nh do MandrakeSoft S.A.ph¸t triÓn ®­îc qu¶n lý theo giÊy phÐp "
-"GPL. Tµi liÖu do\n"
-"MandrakeSoft S.A. viÕt ®­îc qu¶n lý bëi mét giÊy phÐp ®Æc biÖt. H·y tham "
-"kh¶o tµi liÖu ®Ó \n"
-"biÕt thªm chi tiÕt.\n"
-"\n"
-"\n"
-"4. QuyÒn së h÷u trÝ tuÖ\n"
-"\n"
-"Toµn bé quyÒn ®èi víi c¸c thµnh phÇn cña S¶n PhÈm PhÇn MÒm lµ thuéc vÒ c¸c "
-"t¸c gi¶ cña chóng vµ\n"
-"®­îc b¶o vÖ bëi luËt së h÷u trÝ tuÖ vµ luËt b¶n quyÒn ¸p dông cho c¸c ch­¬ng "
-"tr×nh phÇn mÒm.\n"
-"MandrakeSoft S.A. gi÷ quyÒn thay ®æi hoÆc chØnh söa c¸c S¶n PhÈm PhÇn MÒm "
-"toµn bé hay mét\n"
-"phÇn.\n"
-"\"Mandrake\", \"Mandrake Linux\" vµ c¸c logo cña nã lµ nh·n ®¨ng ký cña "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Bµn phÝm"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "H·y chän tæ chøc bµn phÝm."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "§©y lµ danh s¸ch ®Çy ®ñ c¸c bµn phÝm hiÖn cã "
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "B¹n muèn chän kiÓu cµi ®Æt nµo?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Cµi ®Æt/CËp nhËt"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "§©y lµ cµi ®Æt hay cËp nhËt?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Gîi ý"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Chuyªn gia"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "N©ng cÊp"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "ChØ n©ng cÊp c¸c gãi tin"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "H·y chän lo¹i chuét."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Cæng chuét"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "H·y chän cæng nèi tiÕp mµ b¹n g¾n chuét vµo."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "M« pháng c¸c nót"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "M« pháng nót thø 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "M« pháng nót 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "§ang cÊu h×nh card PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "§ang cÊu h×nh IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "kh«ng cã sÎn c¸c ph©n vïng"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "QuÐt c¸c ph©n vïng ®Ó t×m ®iÓm g¾n kÕt"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Chän ®iÓm g¾n kÕt"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Kh«ng ®äc ®­îc b¶ng ph©n vïng, nã bÞ háng nÆng :(\n"
-"Cè g¾ng tiÕp tôc trªn c¸c ph©n vïng trèng bÞ háng (Mäi d÷ liÖu sÏ bÞ mÊt!).\n"
-"Gi¶i ph¸p kh¸c lµ cÊm DrakX thay ®æi b¶ng ph©n vïng.\n"
-"(Lçi nh­ sau %s)\n"
-"\n"
-"B¹n cã ®ång ý ®Ó mÊt toµn bé c¸c ph©n vïng?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kh«ng thÓ ®äc chÝnh x¸c b¶ng ph©n vïng.\n"
-"TiÕp tôc sÏ gÆp nguy c¬!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Kh«ng cßn kh«ng gian trèng 1MB cho bÉy khëi ®éng! TiÕp tôc cµi ®Æt, nh­ng ®Ó "
-"khëi ®éng hÖ thèng, b¹n cÇn t¹o ph©n vïng bÉy khëi ®éng trong DiskDrake."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Kh«ng cã ph©n vïng root ®Ó thùc hiÖn n©ng cÊp"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Ph©n vïng root"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "§©u lµ ph©n vïng root (/) cña hÖ thèng?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "B¹n cÇn khëi ®éng l¹i ®Ó c¸c thay ®æi trong b¶ng ph©n vïng cã t¸c dông"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "H·y chän c¸c ph©n vïng b¹n muèn format"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "KiÓm tra lçi bÒ mÆt ®Üa?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "§ang format c¸c ph©n vïng"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "§ang t¹o vµ format tËp tin %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Swap kh«ng ®ñ ®Ó thùc hiÖn cµi ®Æt, h·y t¨ng thªm"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "§ang t×m c¸c gãi hiÖn cã"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "§ang t×m c¸c gãi ®Ó n©ng cÊp"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"HÖ thèng kh«ng ®ñ kh«ng gian ®Ó thùc hiÖn cµi ®Æt hay n©ng cÊp (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Hoµn thµnh (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Tèi thiÓu (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Gîi ý (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"H·y chän t¶i hay l­u lùa chän gãi tin vµo ®Üa mÒm.\n"
-"§Þnh d¹ng gièng nh­ c¸c ®Üa mÒm ®­îc t¹o ra khi cµi ®Æt tù ®éng."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "T¶i tõ ®Üa mÒm"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "§ang t¶i tõ ®Üa mÒm"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Sù lùa chän gãi tin"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "N¹p mét ®Üa mÒm cã chøa sù lùa chän gãi tin"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "L­u vµo ®Üa mÒm"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Cì ®­îc chän qu¸ lín so víi kho¶ng trèng cã thÓ dïng"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "KiÓu cµi ®Æt"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"B¹n ®· kh«ng chän bÊt kú mét nhãm gãi tin nµo\n"
-"H·y chän viÖc cµi ®Æt tèi thiÓu mµ b¹n muèn"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Víi X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Víi tµi liÖu c¬ b¶n (khuyÕn nghÞ!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Thùc sù cµi ®Æt tèi thiÓu (®Æc biÖt lµ kh«ng cã urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"NÕu b¹n cã ®ñ ®Üa CD trong danh s¸ch d­íi ®©y, nhÊn OK.\n"
-"NÕu b¹n kh«ng cã CD nµo trong sè nµy, nhÊn Bá qua.\n"
-"NÕu chØ thiÕu mét sè CD, bá chän chóng, råi nhÊn OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom mang nh·n \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "ChuÈn bÞ cµi ®Æt"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"§ang cµi ®Æt gãi %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "CÊu h×nh sau khi cµi ®Æt"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "N¹p ®Üa mÒm khëi ®éng vµo æ ®Üa %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "N¹p mét ®Üa mÒm chøa c¸c m«-®un cËp nhËt vµo æ ®Üa %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"B©y giê b¹n cã thÓ t¶i phÇn mÒm m· hãa vÒ dïng.\n"
-"\n"
-"C¶nh b¸o:\n"
-"\n"
-"V× c¸c nhu cÇu chung kh¸c nhau ®Ó sö dông phÇn mÒm nµy d­íi sù r»ng buéc\n"
-"ph¸p lý kh¸c nhau, kh¸ch hµng vµ/hoÆc ng­êi dïng ®Çu cuèi sö dông phÇn\n"
-"mÒm nµy nªn kh¼ng ®Þng r»ng luËt ph¸p n­íc m×nh cho phÐp t¶i xuèng, l­u\n"
-"gi÷ vµ/hoÆc sö dông.\n"
-"\n"
-"H¬n n÷a, kh¸ch hµng vµ/hoÆc ng­êi dïng ®Çu cuèi sÏ ph¶i biÕt lµ viÖc nµy\n"
-"kh«ng vi ph¹m luËt ph¸p.\n"
-"\n"
-"\n"
-"Kh«ng mét bé phËn nµo cña Mandrakesoft vµ/hoÆc c¸c nhµ cung cÊp chÞu tr¸ch\n"
-"nhiÖn vÒ c¸c sù cè ®Æc biÖt trùc tiÕp hay gi¸n tiÕp (bao gåm, nh­ng kh«ng\n"
-"bÞ giíi h¹n cho c¸c mÊt m¸t lîi Ých, gi¸n ®o¹n c«ng viÖc, mÊt d÷ liÖu th­¬ng "
-"m¹i\n"
-"vµ c¸c vÊn ®Ò tµi chÝnh kh¸c, thËm chÝ c¸c tr¸ch nhiÖm vµ båi th­êng ph¶i "
-"tr¶\n"
-"theo quyÕt ®Þnh cña toµ ¸n) n¶y sinh khi sö dông, së h÷u, hay chØ t¶i xuèng\n"
-"c¸c phÇn mÒm nµy, do ®ã kh¸ch hµng vµ/hoÆc ng­êi dïng ®Çu cuèi cã thÓ\n"
-"tiÕn hµnh sau khi ®¨ng ký vµo phÇn giao kÌo hiÖn thêi.\n"
-"\n"
-"\n"
-"NÕu muèn hái thªm vÒ vÊn ®Ò nµy, h·y liªn hÖ víi \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"B©y giê b¹n cã thÓ t¶i xuèng c¸c gãi tin cËp nhËt ®· ®­îc ph¸t hµnh\n"
-"sau khi x©y dùng xong ph©n phèi Linux Mandrake nµy.\n"
-"\n"
-"B¹n sÏ nhËn ®­îc c¸c söa lçi b¶o mËt hay gì rèi, nh­ng cÇn ph¶i\n"
-"cã mét KÕt nèi Internet ®· cÊu h×nh ®Ó thùc hiÖn.\n"
-"\n"
-"Do you want to install the updates ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"§ang liªn hÖ víi website cña Mandrake Linux ®Ó lÊy danh s¸ch c¸c mirrors sÎn "
-"cã"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Chän mét mirror ®Ó t¶i c¸c gãi vÒ"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "§ang liªn hÖ víi mirror ®Ó lÊy danh s¸ch c¸c gãi hiÖn cã"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Mói giê nµo lµ cña b¹n?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "§ång hå trong m¸y ®Æt theo GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "§ång bé hãa tù ®éng thêi gian (dïng NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "M¸y chñ NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "M¸y chñ CUPS ë xa"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Kh«ng cã m¸y in"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "B¹n cã card ©m thanh ISA kh«ng ?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Ch¹y \"sndconfig\" sau khi cµi ®Æt ®Ó cÊu h×nh card ©m thanh"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Kh«ng ph¸t hiÖn ®­îc card ©m thanh nµo. H·y thö \"harddrake\" sau khi cµi ®Æt"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Tãm t¾t"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Chuét"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Mói giê"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "M¸y in"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Card ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Card ©m thanh"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Card TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "C¸c tËp tin côc bé"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "ThiÕt lËp mËt khÈu root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Kh«ng cã mËt khÈu"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "MËt khÈu nµy ®¬n gi¶n qu¸ ( ph¶i gåm Ýt nhÊt %d ký tù)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "X¸c nhËn"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Chøng thùc "
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "M¸y chñ LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Chøng thùc NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "MiÒn NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "M¸y chñ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mét ®Üa mÒm khëi ®éng gióp khëi ®éng hÖ thèng Linux cña b¹n mµ \n"
-"kh«ng phô thuéc vµo tr×nh khëi ®éng th«ng th­êng. C¸ch nµy h÷u dông nÕu\n"
-"b¹n kh«ng muèn cµi ®Æt SILO, hay SILO bÞ hÖ ®iÒu hµnh kh¸c xo¸, hay SILO "
-"kh«ng\n"
-"ho¹t ®éng víi cÊu h×nh phÇn cøng cña b¹n. §Üa mÒm khëi ®éng còng cã thÓ "
-"dïng\n"
-"víi ¶nh cøu gi¶i cña Mandrake, t¹o ®iÒu kiÖn dÔ dµng phôc håi hÖ thèng khi "
-"gÆp\n"
-"sù cè.\n"
-"\n"
-"NÕu b¹n muèn t¹o mét ®Üa mÒm khëi ®éng, n¹p mét ®Üa mÒm vµo æ ®Üa mÒm\n"
-"thø nhÊt vµ nhÊn \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "æ ®Üa mÒm thø nhÊt"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "æ ®Üa mÒm thø hai"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Cho qua"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mét ®Üa mÒm khëi ®éng gióp khëi ®éng hÖ thèng Linux cña b¹n mµ \n"
-"kh«ng phô thuéc vµo tr×nh khëi ®éng th«ng th­êng. C¸ch nµy h÷u dông nÕu\n"
-"b¹n kh«ng muèn cµi ®Æt LILO (hoÆc grub), hay LILO bÞ hÖ ®iÒu hµnh kh¸c xo¸, "
-"hay LILO kh«ng\n"
-"ho¹t ®éng víi cÊu h×nh phÇn cøng cña b¹n. §Üa mÒm khëi ®éng còng cã thÓ "
-"dïng\n"
-"víi ¶nh cøu gi¶i cña Mandrake, t¹o ®iÒu kiÖn dÔ dµng phôc håi hÖ thèng khi "
-"gÆp\n"
-"sù cè.B¹n cã muèn t¹o mét ®Üa mÒm khëi ®éng cho hÖ thèng kh«ng?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(C¶nh b¸o! B¹n ®ang dïng XFS cho ph©n vïng root,\n"
-"viÖc t¹o mét ®Üa mÒm khëi ®éng 1.44 Mb cã thÓ thÊt b¹i,\n"
-"v× XFS cÇn mét æ ®Üa rÊt lín)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Xin lçi, kh«ng cã æ ®Üa mÒm nµo c¶"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Chän æ ®Üa mÒm b¹n muèn dïng ®Ó t¹o ®Üa khëi ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "N¹p ®Üa mÒm vµo %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "§ang t¹o ®Üa khëi ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "§ang chuÈn bÞ tr×nh khëi ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Cã vÎ nh­ m¸y tÝnh ®· l¹c hËu hoÆc kh«ng cßn ®­îc\n"
-" biÕt ®Õn, tr×nh khëi ®éng yaboot sÏ kh«ng lµm viÖc.\n"
-"TiÕp tôc cµi ®Æt, nh­ng b¹n sÏ cÇn ph¶i\n"
-" sö dông BootX ®Ó khëi ®éng m¸y tÝnh."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "B¹n cã muèn sö dông aboot kh«ng?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Lçi khi cµi ®Æt aboot, \n"
-"Cè g¾ng cµi ®Æt kÓ c¶ khi nã cã thÓ ph¸ háng ph©n vïng ®Çu tiªn?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "§ang cµi ®Æt tr×nh n¹p khëi ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Kh«ng cµi ®Æt ®­îc tr×nh khëi ®éng. X¶y ra lçi nh­ sau:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"B¹n cÇn thay ®æi thiÕt bÞ khëi ®éng Tr×nh C¬ Së Më ®Ó cho phÐp\n"
-" ch¹y tr×nh khëi ®éng. NÕu kh«ng nh×n thÊy dÊu nh¾c cña tr×nh\n"
-" khëi ®éng khi khëi ®éng l¹i, nhÊn vµ gi÷ Command-Option-O-F\n"
-" lóc khëi ®éng l¹i råi nhËp:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Råi gâ: shut-down\n"
-"LÇn khëi ®éng tiÕp theo, b¹n sÏ nh×n thÊy dÊu nh¾c cña tr×nh khëi ®éng."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "N¹p mét ®Üa mÒm tr¾ng vµo æ %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "§ang t¹o ®Üa mÒm cµi ®Æt tù ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Mét sè b­íc ch­a ®­îc hoµn thµnh.\n"
-"\n"
-"B¹n thùc sù muèn tho¸t ra b©y giê?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Chóc mõng b¹n, qu¸ tr×nh cµi ®Æt ®· hoµn thµnh.\n"
-"LÊy ®Üa khëi ®éng ra vµ nhÊn return ®Ó khëi ®éng l¹i.\n"
-"\n"
-"VÒ th«ng tin söa lçi cã sÎn cho c¸c phiªn b¶n cña Mandrake Linux,\n"
-"h·y\n"
-"tham kh¶o Errata cã t¹i:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Th«ng tin cÊu h×nh hÖ thèng cã sÎn trong ch­¬ng sau cµi ®Æt cña\n"
-"h­íng dÉn sö dông chÝnh (Official Mandrake Linux User's Guide)."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "T¹o ®Üa mÒm cµi ®Æt tù ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Cµi ®Æt tù ®éng cã thÓ hoµn toµn tù ®éng nÕu\n"
-"muèn, trong tr­êng hîp nµy nã sÏ tiÕp nèi æ cøng!!\n"
-"(NghÜa lµ tiÕn hµnh cµi ®Æt lªn mét æ kh¸c).\n"
-"\n"
-"Cã thÓ b¹n thÝch diÔn l¹i qu¸ tr×nh cµi ®Æt.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Tù ®éng"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "DiÔn l¹i"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "L­u lùa chän c¸c gãi"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Cµi ®Æt Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> gi÷a c¸c phÇn tö  | <Space> chän | <F12> mµn h×nh tiÕp "
-"theo "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "thiÕu kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "thiÕu tr×nh trî gióp trong console"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Chän mét tËp tin"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "N©ng cao"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "C¬ b¶n"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "H·y ®îi"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Th«ng tin"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Më réng C©y"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Thu gän C©y"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "ChuyÓn gi÷a d·y vµ nhãm ®­îc ph©n lo¹i"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Chän tåi, h·y thö l¹i\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Lùa chän cña b¹n? (mÆc ®Þnh %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"C¸c môc nhËp cÇn ph¶i ®iÒn:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Lùa chän cña b¹n? (0/1, `%s' mÆc ®Þnh) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Nót: `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Cã muèn nhÊn lªn nót nµy kh«ng?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Lùa chän cña b¹n? (mÆc ®Þnh `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Cã rÊt nhiÒu thø ®Ó chän tõ (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"H·y chän sè ®Çu tiªn trong hµng 10 nÕu b¹n muèn biªn so¹n,\n"
-"hoÆc nhÊn Enter ®Ó tiÕn hµnh.\n"
-"B¹n chän g×? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Th«ng b¸o, mét nh·n bÞ ®æi:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "§Ö tr×nh l¹i"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Czech (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "§øc"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "T©y ban nha"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "PhÇn lan"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ph¸p"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Na uy"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Ba lan"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Nga"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Thôy ®iÓn"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Bµn phÝm Anh"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Bµn phÝm Mü"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanian"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Mü (cæ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Mü (m¸y ch÷)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Mü (ng÷ ©m)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "BØ"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarian (phonetic)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarian (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilian (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Thôy sü (bµn phÝm §øc)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Thôy sü (bµn phÝm Ph¸p)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Czech (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "§øc (kh«ng cã phÝm chÕt)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "§an m¹ch"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Thôy ®iÓn)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonian"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr " (Georgian (\"Russian\" layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Tæ chøc bµn phÝm Georgian (\"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Hy l¹p"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hungarian"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croatian"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeli (Phonetic)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranian"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Icelandic"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "ý"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "NhËt b¶n 106 keys"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Bµn phÝm Hµn quèc"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latin American"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuanian AZERTY (old)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuanian AZERTY (new)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuanian \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuanian \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvian"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonian"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Dutch"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polish (qwerty layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polish (qwertz layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portuguese"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadian (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanian (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanian (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russian (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenian"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakian (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakian (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbian (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai keyboard"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik keyboard"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkish (traditional \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkish (modern \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainian"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US keyboard (international)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavian (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "PhÝm Alt ph¶i"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "C¶ 2 phÝm Shift ®ång thêi"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "PhÝm Control vµ Shift ®ång thêi"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "PhÝm CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "PhÝm Ctrl vµ Alt ®ång thêi"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "PhÝm Alt vµ Shift ®ång thêi "
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "PhÝm \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "PhÝm \"Windows\" tr¸i"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "PhÝm \"Windows\" ph¶i"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "C¸c g¾n kÕt vßng %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Bá c¸c æ lý luËn tr­íc tiªn\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "C¸c nh©n Kernel 2.2 kh«ng cßn hç trî PCMCIA n÷a, h·y dïng 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Chuét cña h·ng Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr " nót 1"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Chuét chuÈn chung 2 nót"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "ChuÈn chung"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wheel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Chuét chuÈn chung 3 nót"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 nót"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 nót"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "kh«ng cã"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Kh«ng cã chuét"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "H·y thö chuét"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "§Ó chuét ho¹t ®éng,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "H·y l¨n chuét!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "KÕt thóc"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "TiÕp theo ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- VÒ tr­íc"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Cã ®óng kh«ng?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "KÕt nèi vµo Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"C¸ch th­êng dïng nhÊt ®Ó kÕt nèi b»ng ADSL lµ PPPOE.\n"
-"Mét sè kÕt nèi dïng PPTP, sè Ýt dïng DHCP.\n"
-"NÕu b¹n kh«ng râ, h·y dïng 'dïng PPPOE'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dïng DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "dïng PPPOE"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "dïng PPTP"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"B¹n muèn dïng DHCP kh¸ch (client) nµo?\n"
-"MÆc ®Þnh lµ DHCPD"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Kh«ng dß t×m ®­îc adapter m¹ng ethernet.\n"
-"Kh«ng thÓ thiÕt lËp kiÓu kÕt nèi nµy."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Chän giao diÖn m¹ng"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "H·y chän adapter m¹ng b¹n muèn dïng ®Ó kÕt nèi Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "kh«ng t×m thÊy card m¹ng"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "§ang cÊu h×nh m¹ng"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"H·y ®iÒn tªn m¸y chñ cña b¹n nÕu b¹n biÕt. Mét sè\n"
-"m¸y chñ DHCP cÇn tªn chñ (hostname) ®Ó ho¹t ®éng.\n"
-"Tªn m¸y chñ cña b¹n ph¶i cã ®ñ thµnh phÇn, vÝ dô nh­\n"
-" ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Tªn m¸y chñ"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "§å ThuËt CÊu H×nh M¹ng"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem ISDN l¾p ngoµi"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Card ISDN l¾p trong"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Lo¹i nµo lµ kÕt nèi ISDN cña b¹n?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"B¹n thÝch cÊu h×nh ISDN nµo?\n"
-"\n"
-"* CÊu h×nh cò sö dông isdn4net. Nã cã c¸c c«ng cô m¹nh,\n"
-" nh­ng l¹i phøc t¹p cho viÖc cÊu h×nh vµ kh«ng chuÈn.\n"
-"\n"
-"* CÊu h×nh kiÓu míi dÔ hiÓu vµ chuÈn h¬n, nh­ng l¹i Ýt\n"
-" c«ng cô h¬n.\n"
-"\n"
-"Chóng t«i khuyÕn c¸o nªn dïng cÊu h×nh ®¬n gi¶n nµy.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "CÊu h×nh míi (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "CÊu h×nh cò (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "CÊu h×nh ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Chän nhµ cung cÊp dÞch vô.\n"
-" NÕu kh«ng cã trong danh s¸ch, chän Kh«ng cã trong danh s¸ch"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Giao thøc ch©u ¢u"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Giao thøc ch©u ¢u (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Giao thøc cho phÇn cßn l¹i cña thÕ giíi"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Giao thøc cho phÇn cßn l¹i cña thÕ giíi \n"
-" kh«ng cã D-Channel (®­êng truyÒn thuª)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "B¹n muèn sö dông giao thøc nµo?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "B¹n cã lo¹i card nµo ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "T«i kh«ng biÕt"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"NÕu b¹n cã card ISA th× gi¸ trÞ trªn mµn h×nh tiÕp theo th­êng ®óng.\n"
-"\n"
-"NÕu b¹n cã card PCMCIA, b¹n cÇn biÕt th«ng sè IRQ vµ IO cña card.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Hñy bá"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "TiÕp tôc"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "C¸i nµo lµ card ISDN cña b¹n?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ph¸t hiÖn ra card ISDN PCI, nh­ng kh«ng biÕt lo¹i nµo. H·y chän mét card PCI "
-"ë mµn h×nh tiÕp theo."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Kh«ng t×m ®­îc card ISDN PCI. H·y chän ë mµn h×nh tiÕp theo"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "H·y chän cæng nèi tiÕp (serial) nèi víi modem cña b¹n."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Tïy chän kÕt nèi quay sè"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Tªn kÕt nèi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Sè ®iÖn tho¹i"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID ®¨ng nhËp"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-based"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-based"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Tªn miÒn"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "M¸y chñ DNS thø nhÊt"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "M¸y chñ DNS thø hai"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"B¹n cã thÓ ng¾t kÕt nèi hoÆc cÊu h×nh l¹i kÕt nèi."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"B¹n cã thÓ cÊu h×nh l¹i kÕt nèi."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "HiÖn t¹i b¹n ®ang kÕt nèi vµo Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"B¹n cã thÓ kÕt nèi vµo Internet hay cÊu h×nh l¹i kÕt nèi."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "HiÖn t¹i b¹n ch­a kÕt nèi vµo Internet"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "KÕt nèi"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Ng¾t kÕt nèi"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "CÊu h×nh kÕt nèi"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "KÕt nèi Internet vµ cÊu h×nh"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "B©y giê sÏ cÊu h×nh kÕt nèi %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"B©y giê lµ lóc cÊu h×nh cho kÕt nèi %s.\n"
-"\n"
-"\n"
-"NhÊn OK ®Ó tiÕp tôc."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "CÊu H×nh M¹ng"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"V× b¹n ®ang cµi ®Æt m¹ng, nh­ng m¹ng cña b¹n ®· ®­îc cÇu h×nh råi.\n"
-"NhÊn OK ®Ó gi÷ cÊu h×nh cña b¹n, hoÆc Bá qua ®Ó cÊu h×nh l¹i kÕt nèi "
-"Internet vµ m¹ng.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Chµo Mõng §å ThuËt CÊu H×nh M¹ng\n"
-"\n"
-"Chóng ta s¾p cÊu h×nh kÕt nèi internet/m¹ng. NÕu b¹n kh«ng\n"
-"muèn dïng chøc n¨ng dß t×m tù ®éng, h·y bá chän ë hép kiÓm.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Chän lý lÞch ®Ó cÊu h×nh"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Dïng chøc n¨ng dß t×m tù ®éng"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "§ang dß t×m thiÕt bÞ..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "KÕt nèi modem b×nh th­êng"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "dß t×m ®­îc t¹i cæng %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "KÕt nèi ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "dß t×m ®­îc %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "KÕt nèi ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "dß t×m ®­îc trªn giao diÖn %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "KÕt nèi c¸p"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Ph¸t hiÖn kÕt nèi c¸p"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "KÕt nèi LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "Dß t×m thÊy card ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Chän kÕt nèi ®Ó cÊu h×nh"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"B¹n ®· cÊu h×nh nhiÒu ®­êng kÕt nèi vµo Internet.\n"
-"H·y chän mét ®­êng kÕt nèi b¹n muèn dïng.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "KÕt nèi Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "B¹n cã muèn bËt kÕt nèi khi khëi ®éng m¸y tÝnh?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "CÊu h×nh m¹ng"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "CÇn khëi ®éng l¹i M¹ng"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Trôc trÆc x¶y ra khi khëi ®éng l¹i m¹ng: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Chóc mõng, qu¸ tr×nh cÊu h×nh M¹ng vµ Internet ®· kÕt thóc.\n"
-"CÊu h×nh b©y giê sÏ ®­îc ¸p dông cho hÖ thèng.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Sau khi xong, b¹n nªn khëi ®éng l¹i m«i tr­êng X ®Ó tr¸nh mäi sù cè liªn "
-"quan tíi tªn m¸y chñ (hostname)."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Cã vÊn ®Ò trong lóc ®ang cÊu h×nh.\n"
-"Ch¹y thö kÕt nèi qua net_monitor hay mcc. NÕu kÕt nèi kh«ng ho¹t ®éng, cã "
-"thÓ sÏ ph¶i thùc hiÖn l¹i viÖc cÊu h×nh"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"C¶nh b¸o: ThiÕt bÞ nµy tr­íc ®©y ®· ®­îc cÊu h×nh cho kÕt nèi Internet.\n"
-"§¬n gi¶n chØ viÖc ®ång ý gi÷ thiÕt bÞ ®· ®­îc cÊu h×nh nµy.\n"
-"Thay ®æi c¸c tr­êng d­íi ®©y sÏ ghi ®Ì lªn cÊu h×nh nµy."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"H·y nhËp cÊu h×nh IP cho m¸y tÝnh nµy.\n"
-"Mçi mét môc cÇn ®­îc ®iÒn vµo mét ®Þa chØ IP lµ ký hiÖu thËp\n"
-"ph©n vµ dÊu chÊm ®Çy ®ñ (VD: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "§ang cÊu h×nh thiÕt bÞ m¹ng %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "§Þa chØ IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "MÆt n¹ m¹ng"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP tù ®éng"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "§Þa chØ IP ph¶i cã d¹ng 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"H·y ®iÒn tªn m¸y chñ cña b¹n.\n"
-"Tªn m¸y chñ ph¶i lµ tªn ®Çy ®ñ, vÝ dô nh­\n"
-" ``mybox.mylab.myco.com''.\n"
-"B¹n cã thÓ ®iÒn ®Þa chØ IP cña cæng kÕt nèi nÕu b¹n biÕt"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "M¸y chñ DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (vÝ dô: %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "ThiÕt bÞ Gateway"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "CÊu h×nh m¸y chñ ñy nhiÖm"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "M¸y chñ ñy nhiÖm HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "M¸y chñ ñy nhiÖm FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "KiÓm tra ®Þnh danh card m¹ng (h÷u Ých cho laptop)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "M¸y chñ ñy nhiÖm nªn lµ http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "M¸y chñ ñy nhiÖm nªn lµ ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "CÊu h×nh Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "B¹n cã muèn thö kÕt nèi Internet b©y giê kh«ng?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "§ang kiÓm tra kÕt nèi..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "HÖ thèng b©y giê ®­îc nèi víi Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "V× lý do b¶o mËt, b©y giê ng¾t kÕt nèi."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"HÖ thèng kh«ng cã vÎ nh­ ®ang kÕt nèi víi Internet.\n"
-"Thö cÊu h×nh l¹i kÕt nèi."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "CÊu h×nh kÕt nèi"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "H·y ®iÒn hoÆc kiÓm tra tr­êng d­íi ®©y"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Card IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Card IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Card IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Card IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Sè ®iÖn tho¹i c¸ nh©n cña b¹n"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Tªn nhµ cung cÊp (VD: provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Sè ®iÖn tho¹i cña nhµ cung cÊp"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Tªn miÒn thø nhÊt cña nhµ cung cÊp"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Tªn miÒn thø hai cña nhµ cung cÊp"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Chän quèc gia cña b¹n"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "ChÕ ®é quay sè"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Tèc ®é kÕt nèi"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "HÕt thêi gian kÕt nèi (theo gi©y):"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Account ®¨ng nhËp (tªn ng­êi dïng)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "MËt khÈu account"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "G¾n kÕt kh«ng ®­îc: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ph©n vïng më réng kh«ng ®­îc hç trî trªn nÒn t¶ng nµy"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Cã mét lç trèng trong b¶ng ph©n vïng cña b¹n nh­ng ch­¬ng tr×nh kh«ng\n"
-"sö dông ®­îc. ChØ cã gi¶i ph¸p lµ chuyÓn c¸c ph©n vïng ®Çu tiªn ®Ó cã lç "
-"trèng tiÕp theo cho c¸c ph©n vïng më réng"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Kh«i phôc tõ tËp tin %s kh«ng ®­îc: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "TËp tin sao l­u háng"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Lçi ghi vµo tËp tin %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"X¶y ra vÊn ®Ò háng hãc g× ®ã trªn ®Üa cña b¹n. \n"
-"ViÖc kiÓm tra tÝnh toµn vÑn cña d÷ liÖu kh«ng thùc hiÖn ®­îc. \n"
-"§iÒu nµy cã nghÜa lµ viÖc ghi bÊt kú c¸i g× lªn ®Üa sÏ kh«ng chuÈn"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ph¶i cã"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "quan träng"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "rÊt tuyÖt"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "tuyÖt"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "cã thÓ lµ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - HÖ thèng in Ên Unix th«ng dông"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "ThÕ hÖ LPRng - LPR míi"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Daemon in Ên theo tuyÕn"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - In, kh«ng xÕp hµng"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "M¸y in côc bé"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "M¸y in ë xa"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "M¸y in cña m¸y chñ CUPS ë xa"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "M¸y in cña m¸y chñ LPD ë xa"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "M¸y in m¹ng (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "M¸y in cña m¸y chñ SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "M¸y in cña m¸y chñ NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "H·y nhËp thiÕt bÞ in URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Pipe (®Æt èng dÉn) vµo trong lÖnh"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "KiÓu kh«ng x¸c ®Þnh"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "C¸c m¸y in côc bé"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "C¸c m¸y in ë xa"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " ë cæng song song \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", m¸y in USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", thiÕt bÞ ®a n¨ng ë cæng song song \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", thiÕt bÞ ®a n¨ng trªn USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", thiÕt bÞ ®a n¨ng trªn HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", thiÕt bÞ ®a n¨ng"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", ®ang in tíi %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "trªn m¸y chñ LPD \"%s\", m¸y in \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP chñ \"%s\", cæng %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "trªn m¸y chñ Windows \"%s\", chia sÎ \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "trªn m¸y chñ Novell \"%s\", m¸y in \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", dïng trong lÖnh %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "M¸y in Raw (kh«ng cã driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(trªn %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(trªn m¸y tÝnh nµy)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Trªn m¸y chñ CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (MÆc ®Þnh)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Chän KÕt Nèi M¸y In"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "M¸y in ®­îc kÕt nèi nh­ thÕ nµo?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"C¸c m¸y in trªn m¸y chñ CUPS ë xa th× kh«ng ph¶i cÊu h×nh t¹i ®©y, c¸c m¸y "
-"in sÏ ®­îc ph¸t hiÖn tù ®éng."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CÊu h×nh CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "ChØ ®Þnh m¸y chñ CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"§Ó truy cËp c¸c m¸y in trªn c¸c m¸y chñ CUPS trong m¹ng côc bé, b¹n kh«ng "
-"cÇn ph¶i cÊu h×nh g× c¶. C¸c m¸y chñ CUPS tù ®éng th«ng b¸o víi m¸y cña b¹n "
-"vÒ c¸c m¸y in cña chóng. Toµn bé c¸c m¸y in ®­îc x¸c ®Þnh t¹i m¸y cña b¹n sÏ "
-"liÖt kª trong môc \"M¸y in ë xa\" trong cöa sæ chÝnh cña Printerdrake. Khi "
-"m¸y chñ CUPS kh«ng cã trong m¹ng côc bé, b¹n cÇn nhËp ®Þa chØ IP cña m¸y chñ "
-"CUPS vµ tïy chän sè hiÖu cæng ®Ó nhËn th«ng tin vÒ m¸y in tõ m¸y chñ. NÕu "
-"kh«ng, h·y ®Ó c¸c tr­êng nµy trèng."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Th«ng th­êng, CUPS ®­îc cÊu h×nh tù ®éng theo m«i tr­êng\n"
-"m¹ng lµm viÖc, v× vËy b¹n cã thÓ truy cËp tíi m¸y in cña m¸y chñ\n"
-"CUPS trong m¹ng lµm viÖc côc bé. NÕu cÊu h×nh nµy kh«ng ®óng,\n"
-"h·y t¾t \"CÊu h×nh CUPS tù ®éng\" vµ tù thùc hiÖn so¹n th¶o tËp\n"
-"tin /etc/cups/cupsd.conf . Sau ®ã, xin ®õng quªn khëi ®éng l¹i\n"
-"CUPS (víi lÖnh: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "§Þa chØ IP ph¶i cã d¹ng 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Sè hiÖu cæng nªn lµ mét sè nguyªn !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP cña m¸y chñ CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Cæng"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CÊu h×nh CUPS tù ®éng"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "§ang ph¸t hiÖn thiÕt bÞ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "KiÓm tra c¸c cæng"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Thªm m¸y in míi"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Chµo mõng §å thuËt ThiÕt lËp M¸y in\n"
-"\n"
-"§å thuËt nµy cho phÐp cµi ®Æt m¸y in côc bé hay ë xa ®Ó dïng tõ m¸y tÝnh nµy "
-"còng nh­ tõ c¸c m¸y tÝnh kh¸c trong m¹ng.\n"
-"\n"
-"§å thuËt sÏ hái vÒ c¸c th«ng tin cÇn thiÕt ®Ó cµi ®Æt m¸y in vµ ®Ó b¹n truy "
-"cËp tíi toµn bé driver m¸y in sÎn cã, tïy chän driver, vµ kiÓu kÕt nèi cña "
-"m¸y in."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "M¸y in Côc bé"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Chµo mõng §å thuËt ThiÕt lËp M¸y in\n"
-"\n"
-"§å thuËt nµy trî gióp viÖc cµi ®Æt m¸y in ®­îc nèi víi m¸y tÝnh nµy.\n"
-"\n"
-"H·y nèi m¸y in víi m¸y tÝnh vµ sau ®ã bËt nã lªn. NhÊn chuét lªn \"TiÕp theo"
-"\" khi ®· sÎn sµng, vµ nhÊn \"Bá qua\" nÕu b¹n ch­a muèn thiÕt lËp m¸y in "
-"vµo lóc nµy.\n"
-"\n"
-"L­u ý lµ mét sè m¸y tÝnh cã thÓ ®æ vì trong lóc tù ®éng ph¸t hiÖn m¸y in, "
-"t¾t \"Tù ®éng ph¸t hiÖn m¸y in\" ®Ó kh«ng thùc hiÖn viÖc cµi ®Æt m¸y in víi "
-"tù ®éng ph¸t hiÖn. Dïng \"ChÕ ®é Chuyªn gia\" cña PrinterDrake khi muèn "
-"thiÕt lËp viÖc in Ên víi m¸y in ë xa nÕu PrinterDrake kh«ng tù ®éng liÖt kª "
-"nã."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Tù ®éng ph¸t hiÖn M¸y in"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Chóc mõng, b©y giê m¸y in ®· ®­îc cµi ®Æt vµ cÊu h×nh!\n"
-"\n"
-"Cã thÓ in b»ng lÖnh \"In Ên\" tõ c¸c øng dông (th­êng n»m ë trªn menu \"TÖp"
-"\").\n"
-"\n"
-"NÕu kh«ng muèn thªm, bít, hoÆc ®æi tªn mét m¸y in, hay khi muèn thay ®æi "
-"c¸c  thiÕt lËp tïy chän mÆc ®Þnh (khay n¹p giÊy, chÊt l­îng in, v.v...), h·y "
-"chän \"M¸y in\" trong môc \"PhÇn cøng\" ë Mandrake Control Center."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "C¸c m¸y in ®­îc ph¸t hiÖn tù ®éng"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"PrinterDrake cã thÓ tù ®éng ph¸t hiÖn c¸c m¸y in côc bé ®­îc nèi víi cæng "
-"song song hay USB, nh­ng l­u ý lµ trªn mét sè hÖ thèng, viÖc ph¸t hiÖn tù "
-"®éng cã thÓ lµm tª liÖt hÖ thèng vµ dÉn tíi lµm háng c¸c hÖ thèng tËp tin! "
-"V× vËy, h·y tiÕn hµnh nh­ng kh«ng cã g× lµ ®¶m b¶o cho b¹n!\n"
-"\n"
-"B¹n cã thùc sù muèn m¸y in ®­îc tù ®éng ph¸t hiÖn?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Ch¹y dß t×m tù ®éng"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "ThiÕt lËp m¸y in b»ng tay"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Ph¸t hiÖn ®­îc %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "M¸y in t¹i cæng song song \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "M¸y in USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Kh«ng t×m thÊy m¸y in côc bé nµo! §Ó tù b¹n cµi ®Æt, h·y nhËp tªn thiÕt bÞ/"
-"tªn file vµo dßng nhËp (C¸c cæng song song: /dev/lp0, /dev/lp1, ..., t­¬ng "
-"®­¬ng víi LPT1:, LPT2:, ...; m¸y in USB thø nhÊt: /dev/usb/lp0, thø hai : /"
-"dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Ph¶i nhËp mét thiÕt bÞ hoÆc mét tªn file!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Kh«ng t×m thÊy m¸y in côc bé nµo!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"M¸y in m¹ng cã thÓ chØ ®­îc thiÕt lËp sau qu¸ tr×nh cµi ®Æt. H·y chän \"PhÇn "
-"cøng\" råi ®Õn \"M¸y in\" trong Mandrake Control Center."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"§Ó cµi ®Æt m¸y in m¹ng, nhÊn \"Bá qua\", chuyÓn tíi \"ChÕ ®é Chuyªn gia\" vµ "
-"nhÊn \"Thªm m¸y in míi\" mét lÇn n÷a."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Tù ®éng ph¸t hiÖn ®­îc m¸y in sau ®©y, nÕu kh«ng ph¶i lµ c¸i b¹n muèn cÊu "
-"h×nh, nhËp tªn thiÕt bÞ/file vµo dßng nhËp"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"§©y lµ danh s¸ch c¸c m¸y in ®· ®­îc tù ®éng ph¸t hiÖn. H·y chän m¸y in b¹n "
-"muèn thiÕt lËp hoÆc nhËp tªn thiÕt bÞ/file vµo dßng nhËp"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"M¸y in sau ®©y ®· ®­îc ph¸t hiÖn tù ®éng. ViÖc cÊu h×nh m¸y in sÏ hoµn toµn "
-"tù ®éng. NÕu m¸y in kh«ng ®­îc ph¸t hiÖn ®óng hoÆc nÕu muèn thùc hiÖn tïy "
-"chØnh cÊu h×nh m¸y in, h·y bËt \"CÊu h×nh b»ng tay\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"§©y lµ danh s¸ch toµn bé c¸c m¸y in ®­îc ph¸t hiÖn tù ®éng. H·y chän m¸y in "
-"b¹n muèn thiÕt lËp. ViÖc cÊu h×nh m¸y in sÏ thùc hiÖn hoµn toµn tù ®éng. NÕu "
-"m¸y in kh«ng ®­îc ph¸t hiÖn ®óng hay nÕu b¹n muèn tïy chØnh viÖc cÊu h×nh, "
-"h·y bËt \"CÊu h×nh b»ng tay\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"H·y chä cæng n¬i m¸y in ®­îc nèi vµo hoÆc nhËp mét tªn cho thiÕt bÞ /file "
-"vµo dßng nhËp"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "H·y chän cæng nèi víi m¸y in."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Cæng song song: /dev/lp0, /dev/lp1, ..., t­¬ng ®­¬ng víi LPT1:, "
-"LPT2:, ...; m¸y in USB thø nhÊt: /dev/usb/lp0, thø hai: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Ph¶i chän/nhËp mét m¸y in/thiÕt bÞ!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "CÊu h×nh b»ng tay"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Cã ph¶i m¸y in lµ thiÕt bÞ ®a n¨ng cña HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 víi m¸y quÐt)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "§ang cµi ®Æt gãi tin HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "§ang kiÓm tra thiÕt bÞ vµ cÊu h×nh HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "§ang cµi ®Æt gãi tin SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "QuÐt trªn thiÕt bÞ ®a n¨ng cña HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "T¹o cæng m¸y in sÎn sµng cho CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "§ang ®äc c¬ së d÷ liÖu m¸y in ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "C¸c tïy chän m¸y in LPD ë xa"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"§Ó sö dông m¸y in lpd ë xa, b¹n cÇn cung cÊp tªn chñ cña m¸y chñ in Ên vµ "
-"tªn m¸y in cña m¸y chñ ®ã."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Tªn m¸y chñ ë xa"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Tªn m¸y in ë xa"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "ThiÕu tªn m¸y chñ ë xa!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "ThiÕu tªn m¸y in ë xa !"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Tïy chän m¸y in SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"§Ó in b»ng m¸y in SMB, b¹n cÇn cung cÊp tªn m¸y chñ SMB (L­u ý! Tªn nµy cã "
-"thÓ kh¸c víi tªn m¸y chñ TCP/IP cña nã!) vµ cã thÓ lµ ®Þa chØ IP cña m¸y chñ "
-"in Ên, còng nh­ lµ tªn chia sÎ cho m¸y in b¹n muèn truy cËp vµ th«ng tin tªn "
-"ng­êi dïng phï hîp nµo ®ã, mËt khÈu, nhãm lµm viÖc."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "M¸y chñ SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP cña m¸y chñ SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Tªn chia sÎ"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Nhãm lµm viÖc"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ph¶i cã tªn hoÆc IP cña m¸y chñ!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "ThiÕu tªn chia sÎ SAMBA!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "C¶nh B¸o B¶o MËt !"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"B¹n s¾p thiÕt lËp viÖc in Ên cho mét tµi kho¶n Windows cã mËt khÈu. V× mét "
-"lçi trong kiÕn tróc cña phÇn mÒm Samba client, mËt khÈu ®­îc ®Æt trong v¨n "
-"b¶n thuÇn tóy vµo dßng lÖnh cña Samba client ®­îc dïng ®Ó truyÒn viÖc in Ên "
-"tíi m¸y chñ Windows. Do vËy, mäi ng­êi dïng m¸y tÝnh nµy cã thÓ hiÓn thÞ mËt "
-"khÈu lªn mµn h×nh b»ng ®­a c¸c lÖnh nh­ \"ps auxwww\".\n"
-"\n"
-"Chóng t«i khuyÕn c¸o nªn dïng mét trong c¸c c¸ch thay thÕ sau (trong mäi "
-"tr­êng hîp, b¹n ph¶i ®¶m b¶o lµ chØ cã c¸c m¸y trong m¹ng côc bé cña b¹n lµ "
-"truy cËp ®­îc m¸y chñ Windows, vÝ dô nh­ dïng t­êng löa):\n"
-"\n"
-"Dïng mét tµi kho¶n Ýt cÇn mËt khÈu t¹i m¸y chñ Windows, nh­ lµ \"GUEST\" hay "
-"mét tµi kho¶n ®Æt biÖt dïng cho viÖc in Ên. §õng bá viÖc b¶o vÖ mËt khÈu ra "
-"khái mét tµi kho¶n cña c¸ nh©n hay cña ng­êi qu¶n trÞ.\n"
-"\n"
-"H·y thiÕt lËp m¸y chñ Windows ®Ó cho m¸y in sÎn sµng víi giao thøc LPD. Sau "
-"®ã thiÕt lËp viÖc in tõ m¸y tÝnh nµy b»ng kiÓu kÕt nèi \"%s\" ë trong "
-"Printerdrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"H·y thiÕt lËp m¸y chñ Windows ®Ó cho m¸y in sÎn sµng víi giao thøc IPP råi "
-"thiÕt lËp viÖc in Ên tõ m¸y tÝnh nµy b»ng kiÓu kÕt nèi \"%s\" ë trong "
-"Printerdrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"H·y nèi m¸y in cña b¹n tíi m¸y chñ Linux vµ ®Ó cho (c¸c) m¸y Windows kÕt nèi "
-"víi nã theo liÓu m¸y kh¸ch.\n"
-"\n"
-"Cã thËt sù muèn tiÕp tôc thiÕt lËp m¸y in nµy nh­ b¹n ®ang lµm b©y giê kh«ng?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "C¸c tïy chän m¸y in NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"§Ó in b»ng m¸y in NetWare, b¹n cÇn cung cÊp tªn m¸y chñ in Ên NetWare (L­u "
-"ý! Tªn nµy cã thÓ kh¸c víi tªn m¸y chñ TCP/IP cña nã!), tªn hµng in cho m¸y "
-"in mµ b¹n muèn truy cËp vµ tªn ng­êi dïng, mËt khÈu phï hîp."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "M¸y chñ in Ên"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Tªn hµng in"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "ThiÕu tªn m¸y chñ NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "ThiÕu tªn hµng in NCP!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Tïy chän cña m¸y in TCP/Socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"§Ó in b»ng m¸y in TCP hay socket, b¹n cÇn cung cÊp tªn m¸y chñ cña m¸y in vµ "
-"sè cæng t­¬ng øng vµ sè hiÖu cæng. Trªn c¸c m¸y chñ HP JetDirect, sè cæng "
-"th­êng lµ 9100, vµ thay ®æi trªn c¸c m¸y kh¸c. H·y xem tµi liÖu ®i kÌm phÇn "
-"cøng."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Tªn m¸y chñ in Ên"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "ThiÕu tªn m¸y chñ in Ên!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "ThiÕt bÞ in URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"B¹n cã thÓ trùc tiÕp chØ ®Þnh URI ®Ó truy cËp m¸y in. URI ph¶i ®¸p øng ®­îc "
-"CUPS hay c¸c ®Æc t¶ Foomatic. L­u ý lµ kh«ng ph¶i mäi lo¹i URI ®Òu ®­îc tÊt "
-"c¶ c¸c spooler hç trî."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "CÇn nhËp mét URI hîp lÖ!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Mäi m¸y in cÇn ®­îc ®Æt tªn (vÝ dô: \"printer\"). C¸c tr­êng M« t¶ vµ VÞ trÝ "
-"kh«ng nhÊt thiÕt ph¶i ®iÒn vµo. Chóng lµ c¸c chó thÝch cho ng­êi dïng."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Tªn m¸y in"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "M« t¶"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "VÞ trÝ"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "§ang chuÈn bÞ c¬ së d÷ liÖu cña m¸y in ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model m¸y in cña b¹n"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake ®· so s¸nh tªn model cã ®­îc tõ viÖc ph¸t hiÖn m¸y in tù ®éng "
-"b»ng danh s¸ch c¸c model trong c¬ së d÷ liÖu m¸y in ®Ó t×m m¸y in ®óng nhÊt. "
-"ViÖc chän nµy cã thÓ kh«ng ®óng, nhÊt lµ khi m¸y in cña b¹n kh«ng hÒ cã "
-"trong c¬ së d÷ liÖu. Do vËy h·y xem viÖc chän nµo lµ ®óng vµ nhÊn lªn "
-"\"Model ®óng\", nÕu kh«ng h·y nhÊn \"Chän model thñ c«ng\" ®Ó thùc hiÖn chän "
-"model m¸y in thñ c«ng ë mµn h×nh tiÕp theo.\n"
-"\n"
-"Printerdrake t×m thÊy m¸y in cña b¹n lµ:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Model ®óng"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Chän model thñ c«ng"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Lùa chän lo¹i m¸y in"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "B¹n cã lo¹i m¸y in nµo?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"H·y xem thö Printerdrake ®· tù ®éng ph¸t hiÖn kiÓu m¸y in cã chÝnh x¸c "
-"kh«ng. H·y t×m kiÓu m¸y in ®óng trong danh s¸ch khi con chá n»m ë kÓu m¸y in "
-"sai hoÆc ë \"M¸y in Raw\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"NÕu m¸y in cña b¹n kh«ng ®­îc liÖt kª, h·y chän mét c¸i t­¬ng ®­¬ng hay "
-"t­¬ng tù (xem tµi liÖu m¸y in)."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "CÊu h×nh m¸y in Windows OKI"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"B¹n ®ang cÊu h×nh m¸y in OKI Laser dïng cho Windows. Nh÷ng\n"
-"m¸y in nµy sö dông giao thøc kÕt nèi ®Æc biÖt vµ v× vËy chóng chØ lµm viÖc "
-"khi nèi víi cæng song song ®Çu tiªn. Khi m¸y in ®­îc nèi víi cæng kh¸c hay "
-"mét m¸y chñ in Ên, h·y nèi m¸y in vµo cæng song song ®Çu tiªn tr­íc khi thùc "
-"hiÖn in thö. NÕu kh«ng lµm nh­ vËy, m¸y in sÏ kh«ng ch¹y. KiÓu nèi ®ã sÏ bÞ "
-"driver bá qua."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "CÊu h×nh Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"C¸c driver m¸y in Inkjet cña h·ng Lexmark chØ hç trî m¸y in côc bé, kh«ng hç "
-"trî c¸c m¸y in ë xa hay m¸y chñ in Ên. H·y nèi m¸y in vµo mét cæng cña m¸y "
-"tÝnh hoÆc cÊu h×nh nã trªn m¸y tÝnh mµ nã ®­îc nèi vµo."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"§Ó cã thÓ thùc hiÖn in b»ng Lexmark inkjet vµ cÊu h×nh nµy, b¹n cÇn driver "
-"cña m¸y in inkjet do Lexmark cung cÊp (http://www.lexmark.com/). H·y tíi "
-"site ë Mü vµ nhÊn lªn nót \"Drivers\". Sau ®ã chän kiÓu m¸y in råi ®Õn hÖ "
-"®iÒu hµnh \"Linux\". C¸c driver ë ®ã d­íi d¹ng c¸c gãi RPM hoÆc shell "
-"scripts cïng víi viÖc cµi ®Æt cã giao diÖn ®å häa. B¹n kh«ng cÇn thùc hiÖn "
-"cÊu h×nh nµy b»ng c¸c frontend ®å häa. H·y trùc tiÕp bá qua sau khi chÊp "
-"thuËn giÊy phÐp. Råi in c¸c trang ®Þnh vÞ ®Çu in víi \"b¶o tr× Lexmark\" vµ "
-"®iÒu chØnh thiÕt lËp vÞ trÝ ®Çu in b»ng ch­¬ng tr×nh nµy."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"C¸c thiÕt lËp m¸y in mÆc ®Þnh\n"
-"\n"
-"B¹n nªn b¶o ®¶m lµ khæ giÊy in, lo¹i mùc in vµ chÕ ®é in (nÕu cã), còng nh­ "
-"lµ cÊu h×nh phÇn cøng cña m¸y in Laser (bé nhí, khay kÐp, khay ngoµi) ®­îc "
-"thiÕt lËp ®óng. L­u ý lµ víi mét chÊt l­îng in cao/®é ph©n gi¶i lín, vÒ c¬ "
-"b¶n, th× qu¸ tr×nh in Ên sÏ bÞ chËm ®i."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Tïy chän %s ph¶i lµ mét sè nguyªn!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Tïy chän %s ph¶i lµ mét sè !"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Tïy chän %s kh«ng cã trong danh môc!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"B¹n cã muèn thiÕt lËp m¸y in (\"%s\") nµy\n"
-"lµ m¸y in mÆc ®Þnh?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Trang in thö"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"H·y lùa chän c¸c trang in thö mµ b¹n muèn.\n"
-"L­u ý: trang ¶nh in thö cã thÓ tèn kh¸ nhiÒu thêi gian ®Ó in xong,  vµ trªn "
-"c¸c m¸y in laser cã bé nhí qu¸ Ýt th× cã thÓ cßn kh«ng in ra ®­îc. §a sè c¸c "
-"tr­êng hîp, nã cã ®ñ kh¶ n¨ng ®Ó in thö mét trang chuÈn."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Kh«ng cã trang in thö"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "In"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Trang in thö chuÈn"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Trang in thö thay thÕ (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Trang in thö thay thÕ (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Trang ¶nh in thö"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Kh«ng in thö ra giÊy"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "§ang in thö trang..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Trang in thö ®· ®­îc göi tíi m¸y in.\n"
-"ViÖc nµy cÇn chót thêi gian tr­íc khi m¸y in khëi ch¹y.\n"
-"T×nh tr¹ng in:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Trang in thö ®· ®­îc göi tíi m¸y in.\n"
-"CÇn chót thêi gian tr­íc khi m¸y in lµm viÖc.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Trang in thö cã tèt kh«ng?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "m¸y in Raw"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"§Ó in mét tËp tin tõ dßng lÖnh (trong cöa sæ terminal), cã thÓ dïng lÖnh \"%"
-"s <tËp tin>\" hoÆc c«ng cô in Ên ®å häa: \"xpp <tËp tin>\", hoÆc lµ "
-"\"kprinter <tËp tin>\". C¸c c«ng cô ®å häa cho phÐp chän m¸y in vµ thay ®æi "
-"c¸c thiÕt lËp tïy chän dÔ dµng.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"C¸c lÖnh nµy còng cã thÓ dïng trong tr­êng \"LÖnh in\" cña c¸c tho¹i in Ên "
-"trong nhiÒu øng dông, nh­ng kh«ng cung cÊp tªn tËp tin t¹i ®©y bëi v× tËp "
-"tin ®Ó in lµ do øng dông cung cÊp.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"LÖnh \"%s\" cßn cho phÐp thay ®æi c¸c thiÕt lËp tïy chän cho mét t¸c vô in "
-"®Æc biÖt. §¬n gi¶n lµ thªm c¸c thiÕt lËp mong muèn vµo dßng lÖnh, vÝ dô: \"%"
-"s <tËp tin>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"§Ó biÕt vÒ c¸c tïy chän cã sÎn cho m¸y in hiÖn hµnh, h·y ®äc danh s¸ch bªn "
-"d­íi hoÆc nhÊn chuét lªn \"Danh s¸ch tïy chän in\" .%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"§©y lµ danh s¸ch c¸c tïy chän in cã sÎn cho m¸y in hiÖn thêi:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"§Ó in tËp tin tõ dßng lÖnh (trong cöa sæ terminal), h·y dïng lÖnh \"%s <tËp "
-"tin>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"LÖnh nµy cßn ®­îc dïng trong tr­êng \"LÖnh in\" cña c¸c hép tho¹i in cã "
-"trong rÊt nhiÒu øng dông. Nh­ng ®õng cung cÊp tªn tËp tin ë ®©y v× tËp tin "
-"®Ó in ®· ®­îc øng dông cung cÊp.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"§ª cã danh s¸ch c¸c tïy chän cã sÎn cho m¸y in hiÖn hµnh, nhÊn lªn nót "
-"\"Danh s¸ch tïy chän in\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"§Ó in mét tËp tin tõ dßng lÖnh (trong cöa sæ terminal), h·y dïng lÖnh \"%s "
-"<tËp tin>\" hoÆc \"%s <tËp tin>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Còng cã thÓ dïng giao diÖn ®å häa \"xpdq\" ®Ó thiÕt lËp tïy chän vµ qu¶n lý "
-"t¸c vô in.\n"
-"NÕu sö dông KDE lµm m«i tr­êng mµn h×nh nÒn th× cã \"nót ho¶ng lo¹n\",mét "
-"biÓu t­îng trªn mµn h×nh nÒn, cã nh·n \"Dõng M¸y in!\", ®Ó dõng ngay mäi t¸c "
-"vô in khi nhÊn chuét lªn. Nót nµy cã Ých vÝ dô nh­ khi bÞ kÑt giÊy.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"LÖnh \"%s\" vµ \"%s\" còng cho phÐp thay ®æi viÖc thiÕt lËp tïy chän cho t¸c "
-"vô in ®Æc biÖt. §¬n gi¶n lµ thªm c¸c thiÕt lËp mong muèn vµo dßng lÖnh vÝ dô "
-"\"%s <tËp tin>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "§ãng"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "In/QuÐt trªn \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "In trªn m¸y in \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Danh s¸ch tïy chän in"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"ThiÕt bÞ ®a n¨ng HP cña b¹n ®­îc cÊu h×nh tù ®éng ®Ó cã thÓ tiÕn hµnh quÐt. "
-"B©y giê cã thÓ quÐt víi \"scanimage\" (\"scanimage -d hp:%s\" ®Ó Ên ®Þnh m¸y "
-"quÐt nÕu cã h¬n mét m¸y) tõ dßng lÖnh hoÆc víi giao diÖn ®å häa \"xscanimage"
-"\" hay \"xsane\". NÕu ®ang sö dông GIMP, còng cã thÓ thùc hiÖn quÐt ¶nh b»ng "
-"viÖc chän tõ menu \"TÖp\"/\"Cã ®­îc\". Còng gäi ®­îc tõ dßng lÖnh víi \"man "
-"scanimage\" vµ \"man sane-hp\" ®Ó biÕt thªm th«ng tin.\n"
-"\n"
-"§õng dïng \"scannerdrake\" cho thiÕt bÞ nµy!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"ThiÕt bÞ ®a n¨ng HP ®· ®­îc cÊu h×nh tù ®éng ®Ó cã thÓ thùc hiÖn quÐt. B©y "
-"giê b¹n cã thÓ thù hiÖn quÐt tõ dßng lÖnh víi \"ptal-hp %s scan ...\". Thùc "
-"hiÖn quÐt tõ mét giao diÖn ®å häa hay tõ GIMP vÉn ch­a ®­îc hç trî cho thiÕt "
-"bÞ nµy. §Ó biÕt thªm th«ng tin, më \"/usr/share/doc/hpoj-0.8/ptal-hp-scan."
-"html\" trong hÖ thèng. NÕu b¹n cã mét HP LaserJet 1100 hay 1200, b¹n chØ cã "
-"thÓ quÐt khi ®· cµi ®Æt c¸c tïy chän cho m¸y quÐt.\n"
-"\n"
-"§õng dïng \"scannerdrake\" cho thiÕt bÞ nµy!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "§ang ®äc d÷ liÖu m¸y in..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "ChuyÓn t¶i cÊu h×nh m¸y in"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"B¹n cã thÓ sao chÐp cÊu h×nh m¸y in mµ b¹n ®· hoµn thµnh cho spooler %s ®Õn %"
-"s, lµ spooler hiÖn thêi cña b¹n. Mäi d÷ liÖu vÒ cÊu h×nh (tªn m¸y in, m« t¶, "
-"vÞ trÝ, lo¹i kÕt nèi, vµ c¸c thiÕt lËp tïy chän mÆc ®Þnh) ®­îc b¾t kÞp, "
-"nh­ng c¸c c«ng viÖc in Ên sÏ kh«ng ®­îc truyÒn t¶i.\n"
-"Kh«ng ph¶i toµn bé c¸c hµng ®îi in cã thÓ ®­îc truyÒn t¶i do nh÷ng nguyªn "
-"nh©n sau ®©y:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS kh«ng hç trî c¸c m¸y in cña c¸c m¸y chñ Novell hoÆc c¸c m¸y in göi d÷ "
-"liÖu vµo trong mét lÖnh cã khu«n thøc tù do.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ chØ hç trî c¸c m¸y in côc bé, c¸c m¸y in LPD ë xa, vµ c¸c m¸y in Socket/"
-"TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD vµ LPRng kh«ng hç trî m¸y in IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"H¬n n÷a, c¸c hµng ®îi in kh«ng ®­îc t¹o víi ch­¬ng tr×nh nµy hoÆc kh«ng thÓ "
-"truyÒn t¶i \"cÊu h×nh foomatic\"."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Còng nh­ vËy, c¸c m¸y in ®­îc cÊu h×nh víi c¸c file PPD do h·ng chÕ t¹o cung "
-"cÊp hoÆc ®i kÌm víi c¸c driver CUPS cã thÓ kh«ng ®­îc truyÒn t¶i."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"§¸nh dÊu vµo m¸y in mµ b¹n muèn göi tíi vµ nhÊn lªn \n"
-"\"TruyÒn\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Kh«ng truyÒn tíi m¸y in"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "TruyÒn"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"M¸y in cã tªn \"%s\" ®· tån t¹i bªn d­íi %s råi. \n"
-"NhÊn \"TruyÒn\" ®Ó ghi ®Ì lªn nã.\n"
-"B¹n còng cã thÓ gâ tªn míi hay bá qua m¸y in nµy."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Tªn m¸y in chØ nªn dïng c¸c ch÷, sè vµ dÊu g¹ch ngang thÊp"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"M¸y in \"%s\" ®ang tån t¹i,\n"
-"b¹n thùc sù muèn ghi ®Ì lªn cÊu h×nh cña nã?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Tªn m¸y in míi"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "§ang truyÒn %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"B¹n ®· hoµn thµnh viÖc truyÒn biÓu mÉu m¸y in mÆc ®Þnh (\"%s\"). B¹n cã muèn "
-"dïng nã còng lµ m¸y in mÆc ®Þnh trong hÖ thèng in Ên %s míi?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Lµm míi l¹i d÷ liÖu m¸y in ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "CÊu h×nh cña mét m¸y in ë xa"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "§ang khëi ch¹y m¹ng ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "CÊu h×nh m¹ng b©y giê"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Ch­a cÊu h×nh chøc n¨ng m¹ng"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"B¹n s¾p cÊu h×nh mét m¸y in ë xa. B¹n cÇn cã truy cËp m¹ng ®Ó thùc hiÖn, "
-"nh­ng m¹ng vÉn ch­a ®­îc cÊu h×nh. NÕu thùc hiÖn mµ kh«ng cã cÊu h×nh m¹ng, "
-"b¹n sÏ kh«ng thÓ dïng m¸y in mµ b¹n ®ang cÊu h×nh lóc nµy. B¹n muèn tiÕn "
-"hµnh thÕ nµo?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "TiÕp tôc mµ kh«ng cÊu h×nh m¹ng"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"CÊu h×nh m¹ng ®· lµm trong khi cµi ®Æt kh«ng thÓ khëi ch¹y vµo lóc nµy. H·y "
-"kiÓm tra xem cã thÓ truy cËp ®­îc m¹ng sau khi khëi ®éng hÖ thèng vµ hiÖu "
-"chØnh cÊu h×nh b»ng Trung t©m §iÒu khiÓn Mandrake, môc \"M¹ng & Internet\"/"
-"\"KÕt nèi\", råi tiÕn hµnh thiÕt lËp m¸y in, còng sö dông Trung t©m §iÒu "
-"khiÓn Mandrake, môc \"PhÇn cøng\"/\"M¸y in\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Truy cËp m¹ng ®· kh«ng ch¹y vµ kh«ng thÎ khëi ch¹y. H·y kiÓm tra cÊu h×nh vµ "
-"phÇn cøng cña b¹n. Sau ®ã thö cÊu h×nh m¸y in ë xa l¹i mét lÇn n÷a."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Khëi ch¹y l¹i hÖ thèng in Ên ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "cao"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "hoang t­ëng"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Cµi ®Æt hÖ thèng in Ên víi møc b¶o mËt %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"B¹n s¾p cµi ®Æt hÖ thèng in Ên %s lªn mét hÖ thèng ®ang ch¹y ë møc b¶o mËt %"
-"s.\n"
-"\n"
-"HÖ thèng in Ên nµy ch¹y mét daemon (tiÕn tr×nh nÒn) ®Ó ®îi c¸c t¸c vô in vµ "
-"®Ó qu¶n lý chóng. Daemon nµy còng cã thÓ truy cËp tõ mét m¸y ë xa th«ng qua "
-"m¹ng vµ ®ã còng lµ kh¶ n¨ng dÔ bÞ tÊn c«ng. Bëi vËy, chØ cã mét sè Ýt c¸c "
-"daemon lµ ®­îc khëi ch¹y theo mÆc ®Þnh ë møc b¶o mËt nµy.\n"
-"\n"
-"B¹n cã thËt sù muèn cÊu h×nh viÖc in trªn m¸y tÝnh nµy?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Khëi ch¹y hÖ thèng in Ên khi khëi ®éng m¸y"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"HÖ thèng in (%s) sÏ kh«ng tù ®éng khëi ch¹y khi m¸y tÝnh ®­îc khëi ®éng.\n"
-"\n"
-"Cã kh¶ n¨ng lµ viÖc khëi ch¹y tù ®éng ®· bÞ t¾t do viÖc thay ®æi lªn møc ®é "
-"b¶o mËt cao h¬n nh»m tr¸nh kh¶ n¨ng bÞ tÊn c«ng qua hÖ thèng in Ên.\n"
-"\n"
-"B¹n cã muèn bËt l¹i chøc n¨ng khëi ch¹y tù ®éng cña hÖ thèng in Ên kh«ng?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "§ang kiÓm tra phÇn mÒm ®· cµi ®Æt..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "§ang gì bá LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "§ang gì bá LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Chän Spooler M¸y In"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "B¹n muèn sö dông hÖ thèng in Ên (spooler) nµo?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "CÊu h×nh m¸y in \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "§ang cµi ®Æt Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "C¸c tïy chän m¸y in"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "ChuÈn bÞ PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "CÊu h×nh øng dông ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "B¹n cã muèn cÊu h×nh in Ên kh«ng?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "HÖ thèng in Ên: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"C¸c m¸y in sau ®· ®­îc cÊu h×nh. NhÊn ®óp chuét lªn m¸y in ®Ó thay ®æi thiÕt "
-"lËp: lµm nã thµnh m¸y in mÆc ®Þnh, xem th«ng tin m¸y in, hoÆc lËp mét m¸y in "
-"sÎn dïng víi Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"C¸c m¸y in sau ®©y ®· ®­îc cÊu h×nh. NhÊp ®óp chuét lªn m¸y in nÕu muèn thay "
-"®æi c¸c thiÕt lËp, ®Ó lËp nã lµ m¸y in mÆc ®Þnh, hay ®Ó xem th«ng tin m¸y in "
-"®ã."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Lµm míi l¹i danh s¸ch m¸y in (®Ó hiÓn thÞ c¸c m¸y in CUPS ë xa)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Thay ®æi hÖ thèng in"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "ChÕ ®é b×nh th­êng"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "B¹n cã muèn cÊu h×nh mét m¸y in kh¸c?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Thay ®æi cÊu h×nh m¸y in"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"M¸y in %s\n"
-"B¹n muèn thay ®æi g× trªn m¸y in nµy?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "H·y thùc hiÖn!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "KiÓu kÕt nèi m¸y in"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Tªn, m« t¶, vÞ trÝ cña m¸y in"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "H·ng s¶n xuÊt, kiÓu, driver cña m¸y in"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "H·ng s¶n xuÊt, kiÓu cña m¸y in"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "ThiÕt lËp m¸y in nµy lµm mÆc ®Þnh"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Bæ sung m¸y in nµy vµo Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Bá m¸y in nµy ra khái Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Trang in thö "
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "§Ó biÕt sö dông m¸y in nµy"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Bá m¸y in"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "§ang gì bá m¸y in \"%s\" cò ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "M¸y in mÆc ®Þnh"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "B©y giê, m¸y in \"%s\" ®­îc thiÕt lËp lµm mÆc ®Þnh."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Bæ sung m¸y in vµo Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "M¸y in \"%s\" ®· ®­îc bæ sung vµo Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Bæ sung m¸y in \"%s\" vµo Star Office/OpenOffice.org thÊt b¹i."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Bá m¸y in ra khái Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "M¸y in \"%s\" ®· ®­îc bá ra khái Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Bá m¸y in \"%s\" ra khái Star Office/OpenOffice.org thÊt b¹i."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "B¹n thùc sù muèn bá m¸y in \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "§ang gì bá m¸y in \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "CÊu h×nh Proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Chµo mõng tiÖn Ých cÊu h×nh proxy.\n"
-"\n"
-"T¹i ®©y, b¹n cã thÓ thiÕt lËp c¸c proxy cho http vµ ftp\n"
-"cã hay kh«ng ®ßi hái ®¨ng nhËp vµ mËt khÈu\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"H·y ®iÒn c¸c th«ng tin vÒ proxy cho http\n"
-"H·y ®Ó trèng nÕu kh«ng thiÕt lËp proxy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "cæng"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL nªn b¾t ®Çu b»ng 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr " Bé phËn cæng nªn lµ ch÷ sè"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"H·y ®iÒn c¸c th«ng tin cho proxy ftp\n"
-"H·y ®Ó trèng nÕu kh«ng thiÕt lËp proxy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL nªn b¾t ®Çu b»ng 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"H·y nhËp vµo phÇn ®¨ng nhËp vµ mËt khÈu, nÕu cã.\n"
-"H·y ®Ó trèng nÕu kh«ng muèn ®¨ng nhËp/mËt khÈu"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "®¨ng nhËp"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "mËt khÈu"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "gâ l¹i mËt khÈu"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "MËt khÈu kh«ng ®óng. H·y gâ l¹i!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kh«ng thÓ thªm mét ph©n vïng cho _formatted_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kh«ng thÓ ghi tËp tin %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid háng"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid háng (ph¶i ch¨ng do thiÕu raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Kh«ng ®ñ c¸c ph©n vïng cho møc ®é RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ch¹y hÖ thèng ©m thanh ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron mét lÞch tr×nh lÖnh ®Þnh kú"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ®­îc dïng ®Ó theo dâi t×nh tr¹ng pin vµ ghi nã qua  syslog.\n"
-"Nã còng ®­îc dïng ®Ó t¾t m¸y tÝnh khi pin yÕu."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ch¹y c¸c lÖnh trong lÞch tr×nh theo thêi gian Ên ®Þnh,\n"
-"vµ ch¹y c¸c lo¹t lÖnh (batch commands) khi t¶i trung b×nh ®ñ thÊp."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron lµ mét ch­¬ng tr×nh UNIX chuÈn ®Ó ch¹y c¸c ch­¬ng tr×nh do ng­êi\n"
-"dïng chØ ®Þnh trong lÞch tr×nh. vixie cron ®­a c¸c sè tÝnh n¨ng vµo cron "
-"UNIX c¬\n"
-"së, bao gåm c¸c tÝnh n¨ng b¶o mËt tèt h¬n vµ c¸c tïy chän cÊu h×nh m¹nh h¬n."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ®­a hç trî chuét vµo c¸c øng dông Linux dùa trªn v¨n b¶n nh­ lµ\n"
-"Midnight Commander. Nã còng cho phÐp tÝnh n¨ng c¾t-vµ-d¸n b»ng chuét trong,\n"
-"console vµ hç trî cho c¸c menu bËt lªn trong console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake sÏ ch¹y ®Ó kh¶o s¸t c¸c phÇn cøng, vµ tïy ý cÊu h×nh c¸c\n"
-"phÇn cøng míi/thay ®æi."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache lµ mét ch­¬ng tr×nh m¸y chñ World Wide Web. Nã dïng ®Ó\n"
-"phôc vô c¸c tËp tin HTML vµ CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Daemon siªu m¸y chñ internet (th­êng gäi lµ inetd) ®Ó ch¹y c¸c\n"
-"dÞch vô internet kh¸c khi cÇn. Nã chÞu tr¸ch nhiÖm cho nhiÒu\n"
-"dÞch vô, bao gåm telnet, ftp, rsh, vµ rlogin. Khi t¾t inetd th× nã\n"
-"sÏ t¾t mäi dÞch vô mµ nã ®¶m nhiÖm."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"B¾t ®Çu läc c¸c gãi cho chuçi nh©n 2.2, ®Ó cµi ®Æt\n"
-"bøc t­êng löa ®Ó b¶o vÖ m¸y tÝnh cña b¹n khái c¸c cuéc tÊn c«ng tõ network."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Gãi nµy ®Ó n¹p ¸nh x¹ bµn phÝm ®· chän ®­îc thiÕt lËp\n"
-"trong /etc/sysconfig/keyboard. Dïng chän lùa nµy b»ng tiÖn Ých kbdconfig.\n"
-"B¹n nªn ®Ó nã ho¹t ®éng cho hÇu hÕt c¸c m¸y tÝnh."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Sù tù ®éng t¸i-sinh thµnh cña header nh©n trªn /boot cho\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Tù ®éng dß t×m vµ cÊu h×nh phÇn cøng khi boot"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf thØng tho¶ng sÏ s¾p xÕp l¹i ®Ó thùc hiÖn nhiÒu t¸c vô\n"
-"vµo thêi gian boot ®Ó duy tr× cÊu h×nh hÖ thèng."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd lµ mét daemon in Ên gióp cho lpr ho¹t ®éng tèt. VÒ c¬\n"
-"b¶n, nã còng lµ mét server xö lý c¸c ho¹t ®éng in Ên cña m¸y in."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"M¸y chñ ¶o Linux , ®­îc dïng ®Ó x©y dùng c¸c m¸y chñ cã ®é sö dông cao vµ\n"
-"tho¶ m·n c¸c yªu cÇu cao."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Tªn BIND lµ mét m¸y chñ phô tr¸ch tªn miÒn (DNS), nã xö lý viÖc chuyÓn tªn "
-"c¸c m¸y chñ thµnh c¸c ®Þa chØ IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"G¾n kÕt vµ bá g¾n kÕt mäi ®iÓm g¾n kÕt cña hÖ thèng tËp tin\n"
-"m¹ng (NFS), SMB (tr×nh qu¶n trÞ LAN/Windows), NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"KÝch ho¹t/BÊt ho¹t mäi giao diÖn m¹ng ®· thiÕt lËp khi\n"
-"khëi ®éng."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS lµ mét giao thøc phæ biÕn ®Ó chia sÎ tËp tin qua m¹ng TCP/IP.\n"
-"DÞch vô nµy cho phÐp m¸y chñ NFS ho¹t ®éng, nã ®­îc cÊu h×nh trong\n"
-"tÖp /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS lµ mét giao thøc phæ biÕn ®Ó chia sÎ tËp tin qua m¹ng\n"
-"TCP/IP. DÞch vô nµy cho phÐp khãa chøc n¨ng cña tËp tin NFS ."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Tù ®éng bËt kho¸ numlock d­íi console\n"
-"vµ  XFree khi boot."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Hç trî OKI 4w vµ c¸c c¸c m¸y in t­¬ng thÝch Windows."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Hç trî PCMCIA th­êng dïng cho c¸c thiÕt bÞ nh­ lµ ethernet vµ\n"
-"modem cña m¸y x¸ch tay. Nã kh«ng ho¹t ®éng nÕu ch­a cÊu h×nh.V×\n"
-"vËy, cµi ®Æt nã kh«ng ¶nh h­ëng g× vÒ  mÆt an toµn nÕu kh«ng dïng nã."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"B¶ng ¸nh x¹ cæng (portmapper) qu¶n lý kÕt nèi RPC sö dông c¸c giao\n"
-"thøc nh­ lµ NFS vµ NIS. M¸y chñ ¸nh x¹ cæng ph¶i ch¹y trªn c¸c m¸y tÝnh\n"
-"cã chøc n¨ng m¸y chñ dïng c¸c giao thøc theo c¬ chÕ RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix lµ ch­¬ng tr×nh vËn chuyÓn th­, nã chuyÓn th­ tõ m¸y tÝnh nµy sang "
-"m¸y tÝnh kh¸c."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"L­u vµ kh«i phôc entropy pool cña hÖ thèng ®Ó cho ho¹t ®éng\n"
-"sinh sè ngÉu nhiªn cã chÊt l­îng cao."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"ChØ ®Þnh thiÕt bÞ raw dÓ  ng¨n chÆn c¸c thiÕt bÞ kh¸c(vÝ dô nh­ ph©n vïng "
-"®Üa cøng)\n"
-", ®Ó sö dông c¸c phÇn mÒm nh­ Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Daemon ®Þnh tuyÕn cho phÐp b¶ng ®Þnh tuyÕn IP tù ®éng ®­îc cËp nhËt\n"
-"b»ng giao thøc RIP. Khi RIP ®ang ®­îc dïng rçng r·i ë c¸c m¹ng nhá, sÏ cÇn\n"
-"thªm c¸c giao thøc ®Þnh tuyÕn phøc t¹p cho c¸c m¹ng phøc t¹p."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Giao thøc RSTAT cho phÐp ng­êi dïng trªn m¹ng gäi c¸c\n"
-"thùc thi metric cho bÊt kú m¸y nµo trªn m¹ng ®ã."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Giao thøc RUSERS cho phÐp ng­êi dïng trªn m¹ng nhËn ra ai\n"
-"®¨ng nhËp vµo t¹i c¸c m¸y ®ang ®¸p øng kh¸c."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Giao thøc RWHO cho phÐp ng­êi dïng tõ xa cã danh s¸ch toµn bé ng­êi\n"
-"dïng ®¨ng nhËp vµo mét m¸y ®ang ch¹y daemon rwho (t­¬ng tù finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Ch¹y hÖ thèng ©m thanh trªn m¸y tÝnh cña b¹n"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog lµ ph­¬ng tiÖn thuËn lîi mµ nhiÒu daemons dïng ®Ó ghi c¸c\n"
-"th«ng ®iÖp vµo c¸c tËp tin log hÖ thèng. Nªn ch¹y syslog th­êng xuyªn."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "T¶i c¸c drivers cho thiÕt bÞ usb cña b¹n."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Khëi ®éng X Font Server (nhÊt thiÕt ph¶i cã ®Ó ch¹y XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "H·y chän dÞch vô nµo ®­îc phÐp khëi ®éng tù ®éng lóc khëi ®éng m¸y"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "In Ên"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Chia se File"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "HÖ thèng"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Qu¶n trÞ tõ xa"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "M¸y chñ C¬ së D÷ liÖu"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "C¸c dÞch vô: %d ®­îc kÝch ho¹t ®Ó ®¨ng nhËp %d"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "DÞch vô"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "®ang ch¹y"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "®· dõng"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "C¸c dÞch vô vµ deamon"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Xin lçi, kh«ng cã th«ng tin\n"
-"thªm vÒ dÞch vô nµy."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "§ang khëi ®éng"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "B¾t ®Çu"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Dõng"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "C¶m ¬n ®· chän sö dông Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Chµo mõng thÕ giíi M· nguån Më"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Thµnh c«ng cña MandrakeSoft dùa vµo nguyªn t¾c c¬ b¶n cña PhÇn mÒm miÔ phÝ. "
-"HÖ ®iÒu hµnh míi lµ kÕt qu¶ cña viÖc céng t¸c trong thÕ giíi cña céng ®ång "
-"linux réng lín"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Ra nhËp thÕ giíi PhÇn mÒm MiÔn phÝ"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Muèn biÕt vÒ céng ®ång M· nguån Më vµ trë thµnh thµnh viªn. §Ó häc, d¹y vµ "
-"gióp ng­êi dïng kh¸c b»ng viÖc tham gia c¸c diÔn ®µn th¶o luËn, b¹n sÏ t×m "
-"thÊy trªn c¸c trang web \"Céng ®ång\"."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet vµ Th«ng ®iÖp"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 cung cÊp c¸c phÇn mÒm tèt nhÊt ®Ó truy cËp mäi thø cã "
-"trªn Internet. L­ít trªn web vµ xem ho¹t ¶nh b»ng Mozilla vµ Konqueror. Trao "
-"®æi th­, qu¶n lý th«ng tin c¸ nh©n b»ng Evolution, KMail vµ rÊt nhiÒu ch­¬ng "
-"tr×nh kh¸c"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "§a ph­¬ng tiÖn vµ §å häa"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 cho phÐp b¹n khai th¸c tèi ®a m¸y tÝnh ®a ph­¬ng tiÖn! Sö "
-"dông c¸c phÇm mÒm míi nhÊt ®Ó ch¬i ©m thanh, so¹n vµ qu¶n lý h×nh ¶nh, ¶nh "
-"chôp, xem v« tuyÕn, video vµ rÊt nhiÒu thø kh¸c"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Ph¸t triÓn"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 lµ mét nÒn ph¸t triÓn c¬ b¶n. Kh¸m ph¸ søc m¹nh cña tr×nh "
-"biªn dÞch gcc cña GNU còng nh­ c¸c m«i tr­êng ph¸t triÓn M· Nguån Më tèt nhÊt"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Trung t©m §iÒu khiÓn Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Trung t©m §iÒu khiÓn cña Mandrake Linux 8.2 lµ vÞ trÝ tËp trung ®Ó tïy chØnh "
-"vµ cÊu h×nh toµn bé hÖ thèng Mandrake"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Giao diÖn ng­êi dïng"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"MandrakeLinux 8.2 cung cÊp 11 m«i tr­êng mµn h×nh nÒn ®å häa vµ c¸c tr×nh "
-"qu¶n lý cöa sæ ®Ó b¹n chän dïng, gåm cã GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8 vµ ..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "PhÇn mÒm M¸y chñ"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"ChuyÓn m¸y tÝnh nµy thµnh mét m¸y chñ m¹nh chØ víi vµi lÇn nhÊn chuét: m¸y "
-"chñ web, th­, t­êng löa, ®Þnh tuyÕn, m¸y chñ tËp tin vµ in,..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "C¸c trß ch¬i"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 cung cÊp c¸c trß ch¬i m· nguån më hay nhÊt - m¸i vßm, "
-"hµnh ®éng, thÓ thao, chiÕn l­îc, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Muèn häc Linux theo c¸ch tù do, ®¬n gi¶n, nhanh chãng ? MandrakeSoft cung "
-"cÊp ch­¬ng tr×nh huÊn luyÖn miÔn phÝ vÒ Linux còng nh­ viÖc kiÓm tra qu¸ "
-"tr×nh häc th«ng qua trung t©m huÊn luyÖn trùc tuyÕn MandrakeCampus."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Hç trî cã chÊt l­îng tõ Céng ®ång Linux vµ MandrakeSoft, lµ ®iÒu cã thÓ! Vµ "
-"nÕu b¹n ®· lµ ng­êi dïng Linux kinh nghiÖm, h·y lµ \"Chuyªn gia\" ®Ó cã thÓ "
-"chia sÎ kiÕn thøc t¹i website trî gióp cña chóng t«i"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"§Ó phôc vô mäi dù ¸n CNTT, c¸c tham vÊn cña h·ng sÎn sµng ph©n tÝch yªu cÇu "
-"cña b¹n vµ ®­a ra c¸c gi¶i ph¸p phï hîp. MandrakeSoft víi bÒ dÇy kinh nghiÖm "
-"sÏ mang ®Õn mét lùa chän c«ng nghÖ ®Ých thùc cho tæ chøc/c«ng ty cña b¹n"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Víi hµng lo¹t gi¶i ph¸p toµn diÖn còng nh­ sù cung cÊp ®Æc biÖt c¸c s¶n phÈm "
-"lu«n sÎn cã t¹i cöa hµng ®iÖn tö cña chóng t«i."
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"§Ó biÕt thªm vÒ c¸c DÞch vô Chuyªn nghiÖp cña MandrakeSoft vµ c¸c ho¹t ®éng "
-"th­¬ng m¹i, h·y xem trang web sau ®©y:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "§ang cµi ®Æt c¸c gãi tin ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Kh«ng thÓ ®äc ®­îc b¶ng ph©n vïng, nã bÞ háng nÆng :(\n"
-"SÏ cè v­ît qua c¸c ph©n vïng trèng bÞ háng"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Lçi!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Kh«ng thÓ t×m thÊy tËp tin ¶nh cÇn dïng `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "CÊu h×nh cµi ®Æt tù ®éng"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"B¹n s¾p cÊu h×nh mét ®Üa mÒm cµi ®Æt tù ®éng. TÝnh n¨ng nµy cã phÇn nguy "
-"hiÓm vµ ph¶i ®­îc sö dông mét c¸ch thËn träng.\n"
-"\n"
-"Víi tÝnh n¨ng ®ã, b¹n sÏ cã kh¶ n¨ng diÔn l¹i qu¸ tr×nh cµi ®Æt mµ b¹n ®· "
-"thùc hiÖn trªn m¸y nµy, ®­îc nh¾c theo kiÓu t­¬ng t¸c cho mét sè b­íc, ®Ó "
-"thay ®æi c¸c gi¸ trÞ cña chóng.\n"
-"\n"
-"§Ó cã sù an toµn tèi ®a, viÖc ph©n vïng vµ format ®Üa sÏ kh«ng bao giê ®­îc "
-"thùc hiÖn tù ®éng theo nh÷ng g× mµ b¹n ®· chän khi cµi ®Æt trªn m¸y nµy.\n"
-"\n"
-"B¹n cã muèn tiÕp tôc?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "CÊu h×nh c¸c b­íc tù ®éng"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"H·y thùc hiÖn chän cho tõng b­íc: nã sÏ diÔn l¹i gièng nh­ b¹n ®· cµi ®Æt "
-"hay lµ sÏ ®­îc thao t¸c b»ng tay"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Chµo mõng.\n"
-"\n"
-"C¸c th«ng sè cã sÎn cho viÖc cµi ®Æt tù ®éng n»m ë c¸c môc ë bªn tr¸i"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Chóc mõng!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"§Üa mÒm tù ®éng cµi ®Æt ®· ®­îc t¹o ra.\n"
-"B¹n cã thÓ diÔn l¹i qu¸ tr×nh cµi ®Æt ®· thùc hiÖn."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Cµi ®Æt Tù ®éng"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Thªm mét môc"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Bá môc gÇn ®©y nhÊt"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      B¸o c¸o DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      B¸o c¸o Daemon cña DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    B¸o c¸o Chi tiÕt cña DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "toµn bé tiÕn tr×nh"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sao l­u c¸c tËp tin hÖ thèng..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "C¸c file Sao chÐp Dù phßng trªn HDD ..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Sao l­u TËp tin Ng­êi dïng ..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "TiÕn tr×nh Sao l­u §Üa cøng..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Sao l­u c¸c TËp tin kh¸c ..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"danh s¸ch file ®· göi b»ng FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) KÕt nèi FTP cã vÊn ®Ò: ®· kh«ng göi ®­îc c¸c tËp tin sao l­u b»ng FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Lçi khi ®ang göi mail. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Lùa chän File"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Chän c¸c tËp tin hay th­ môc vµ nhÊn 'Add'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"H·y kiÓm tra mäi tïy chän ®­îc cÇn ®Õn.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Nh÷ng tïy chän nµy cã thÓ sao l­u vµ kh«i phôc mäi tËp tin trong th­ môc /"
-"etc\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sao l­u c¸c tËp tin hÖ thèng. (th­ môc /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Dïng sao l­u míi (kh«ng thay thÕ c¸c sao l­u cò)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Kh«ng bao gåm c¸c tËp tin ®Æc biÖt (mËt khÈu, nhãm, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Víi tïy chän nµy, cã thÓ kh«i phôc bÊt kú phiªn b¶n\n"
-" trong th­ môc /etc ."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "H·y chän toµn bé ng­êi dïng b¹n muèn gi÷ trong sao l­u."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Kh«ng bao gåm cache cña tr×nh duyÖt"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Dïng c¸c sao l­u míi (kh«ng thay thÕ c¸c sao l­u cò)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "§­îc chän ë xa"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Ng­êi dïng"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Dïng kÕt nèi FTP ®Ó sao l­u"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "H·y nhËp tªn chñ hay IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"H·y nhËp th­ môc ®Ó ®Æt\n"
-" sao l­u trªn m¸y chñ nµy."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "H·y ®¨ng nhËp"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "H·y nhËp mËt khÈu"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Nhí mËt khÈu nµy"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "KÕt nèi FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "KÕt nèi B¶o mËt"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Dïng CD/DVDROM ®Ó sao l­u"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "H·y chän kh«ng gian ®Üa CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "H·y kiÓm tra nÕu ®ang dïng CD-Rewriter"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "H·y kiÓm tra nÕu muèn xo¸ CDRW tr­íc"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"§¸nh dÊu vµo nÕu muèn CD cµi ®Æt\n"
-" cã tÝnh n¨ng khëi ®éng."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"H·y nhËp tªn cña æ ghi CD\n"
-" vd: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Dïng b¨ng tõ ®Ó sao l­u"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "H·y nhËp tªn thiÕt bÞ ®Ó dïng sao l­u"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"H·y nhËp kÝch th­íc tèi ®a\n"
-" ®­îc phÐp cho Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "H·y nhËp th­ môc ®Ó l­u:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Dïng quota cho c¸c file sao l­u."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "M¹ng"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "§Üa cøng / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "hµng giê"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "hµng ngµy"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "hµng tuÇn"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "hµng th¸ng"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Dïng daemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"H·y chän kho¶ng thêi \n"
-"gi÷a c¸c lÇn sao l­u"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"H·y chän ph­¬ng\n"
-"tiÖn dïng ®Ó sao l­u."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Dïng ®Üa cøng víi Daemon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Dïng FTP víi Daemon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "H·y ®¶m b¶o lµ cron daemon ®· cã mÆt trong c¸c dÞch vô."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Göi b¸o c¸o mail sau mçi lÇn sao l­u ®Õn:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "C¸i g×"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "VÞ trÝ"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Khi"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Thªm Tïy chän"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "CÊu H×nh Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "H·y chän vÞ trÝ b¹n muèn sao l­u"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "trªn §Üa Cøng"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "qua M¹ng"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "H·y chän c¸i mµ b¹n muèn sao l­u"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sao l­u hÖ thèng"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Sao l­u Ng­êi dïng"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Chän ng­êi dïng b»ng tay"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sao l­u Nguån: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- TËp tin HÖ thèng:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- TËp tin Ng­êi dïng:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- C¸c TËp Tin Kh¸c:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- L­u trªn §Üa cøng víi ®­êng dÉn: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- L­u lªn m¸y chñ qua FTP: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t tªn ng­êi dïng: %s\n"
-"\t\t víi ®­êng dÉn: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Tïy chän:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tKh«ng bao gåm c¸c TËp tin HÖ thèng\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tC¸c sao l­u sö dông tar vµ bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tC¸c sao l­u sö dông tar vµ gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) gåm cã :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-§Üa Cøng.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-M¹ng b»ng FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-M¹ng b»ng SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ch­a ®­îc cÊu h×nh, h·y nhÊn §å thuËt hay N©ng cao.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Danh s¸ch d÷ liÖu ®Ó kh«i phôc:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Danh s¸ch d÷ liÖu háng:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "H·y bá chän hay gì bá vµo lÇn sau."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Sao l­u c¸c tËp tin bÞ háng"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          Toµn bé d÷ liÖu ®­îc chän ®· ®­îc          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          §· sao l­u thµnh c«ng lªn %s       "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         Kh«i phôc CÊu h×nh       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK ®Ó kh«i phôc c¸c tËp tin kh¸c."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Danh s¸ch ng­êi dïng ®Ó kh«i phôc (chØ cã thêi gian gÇn ®©y nhÊt cña mçi "
-"ng­êi dïng lµ quan träng)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Sao l­u c¸c tËp tin hÖ thèng tr­íc:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "H·y chän ngµy ®Ó phôc håi"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Dïng ®Üa cøng ®Ó sao l­u"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Kh«i phôc tõ ®Üa cøng"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "H·y nhËp th­ môc, n¬i sÏ ®Ó c¸c sao l­u"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Chän ph­¬ng tiÖn kh¸c ®Ó kh«i phôc tõ ®ã"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Ph­¬ng tiÖn Kh¸c"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Kh«i phôc HÖ thèng"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Kh«i phôc Ng­êi dïng"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Kh«i phôc c¸i kh¸c"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "chän ®­êng dÉn ®Ó kh«i phôc (thay cho / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Thùc hiÖn sao l­u míi tr­íc khi kh«i phôc (chØ cho c¸c sao l­u míi)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Gì bá c¸c th­ môc ng­êi dïng tr­íc khi kh«i phôc."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Kh«i phôc mäi sao l­u"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Kh«i phôc Tïy chØnh"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Gióp"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "VÒ tr­íc"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "L­u"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "T¹o Sao l­u"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Kh«i phôc"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "TiÕp theo"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"H·y t¹o sao l­u tr­íc khi kh«i phôc nã...\n"
-" hay kiÓm tra xem ®­êng dÉn ®Ó l­u lµ ®óng."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"Lçi khi göi mail\n"
-"  th­ b¸o c¸o kh«ng göi ®­îc\n"
-"  H·y cÊu h×nh sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Danh s¸ch c¸c gãi cµi ®Æt"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Lçi khi göi tËp tin qua FTP.\n"
-" H·y kiÓm tra cÊu h×nh FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "H·y chän d÷ liÖu cÇn kh«i phôc..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "H·y chän ph­¬ng tiÖn ®Ó kh«i phôc ..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "H·y chän d÷ liÖu ®Ó sao l­u..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Kh«ng thÊy tËp tin cÊu h×nh \n"
-"H·y nhÊn §å thuËt hay N©ng cao."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "§ang ph¸t triÓn... h·y ®îi."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Sao l­u c¸c file hÖ thèng"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Sao l­u c¸c tËp tin ng­êi dïng"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Sao l­u c¸c tËp tin kh¸c"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Tæng TiÕn tr×nh"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "c¸c tËp tin göi qua FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "§ang göi c¸c file..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Danh s¸ch d÷ liÖu sÏ ghi trªn CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "H·y nhËp tèc ®é cña æ ghi CD"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "H·y nhËp tªn æ ghi CD (vÝ dô: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "H·y kiÓm tra nÕu muèn t¹o ®Üa CD gåm tÝnh n¨ng khëi ®éng."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "B©y giê Sao l­u tõ file CÊu H×nh"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Xem CÊu H×nh Sao l­u."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "§å thuËt CÊu h×nh"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "CÊu h×nh N©ng cao"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Sao l­u B©y giê"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"m« t¶ c¸c tïy chän:\n"
-"\n"
-" T¹i b­íc nµy, Drakbackup cho phÐp thay ®æi:\n"
-"\n"
-" - ChÕ ®é nÐn:\n"
-"    \n"
-"      NÕu chän kiÓu nÐn bzip2, b¹n sÏ nÐn d÷\n"
-"      liÖu tèt h¬n gzip (vµo kho¶ng 2-10 %).\n"
-"      Tïy chän nµy kh«ng cã theo mÆc ®Þnh\n"
-"      v× kiÓu nÐn nµy thùc hiÖn l©u h¬n (kho¶ng trªn 1000%).\n"
-" \n"
-" - ChÕ ®é cËp nhËt:\n"
-"\n"
-"      Tïy chän nµy sÏ cËp nhËt sao l­u, nh­ng nã l¹i\n"
-"      kh«ng thËt sù h÷u Ých bëi v× sÏ ph¶i thùc hiÖn\n"
-"      gi¶i nÐn sao l­u tr­íc khi tiÕn hµnh cËp nhËt.\n"
-"      \n"
-" - ChÕ ®é .backupignore:\n"
-"\n"
-"      Gièng nh­ cvs, Drakbackup sÏ bá qua mäi tïy thÝch\n"
-"      trong c¸c tËp tin .backupignore ë tõng th­ môc.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Mét sè lçi khi ®ang göi mail lµ do mét cÊu h×nh\n"
-" sai cña postfix. §Ó gi¶i quyÕt vÊn ®Ò nµy, ph¶i thiÕt lËp\n"
-" myhostname hay mydomain trong /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"m« t¶ c¸c tïy chän:\n"
-"\n"
-" - Sao l­u c¸c tËp tin hÖ thèng:\n"
-"       \n"
-"\tTïy chän nµy cho phÐp sao l­u th­ môc /etc,\n"
-"\tlµ n¬i chøa mäi tËp tin cÊu h×nh. H·y thËn träng\n"
-"\ttrong b­íc kh«i phôc ®Ó tr¸nh viÖc ghi ®Ì:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Sao l­u c¸c tËp tin ng­êi dïng: \n"
-"\n"
-"\tTïy chän nµy cho phÐp chän mäi ng­êi dïng\n"
-"\t®Ó sao l­u.\n"
-"\t§Ó ®¶m b¶o kh«ng gian ®Üa trèng, b¹n kh«ng nªn\n"
-"\tcho c¶ cache cña tr×nh duyÖt vµo.\n"
-"\n"
-" - Sao l­u c¸c tËp tin kh¸c: \n"
-"\n"
-"\tTïy chän nµy cho phÐp ®­a thªm d÷ liÖu ®Ó l­u.\n"
-"\tVíi sao l­u kh¸c, vµo lóc nµy, kh«ng cã kh¶ n¨ng\n"
-"\t®Ó chän sao l­u míi.\t\t\n"
-" \n"
-" - C¸c sao l­u míi:\n"
-"\n"
-"\tSao l­u míi lµ mét tïy chän m¹nh nhÊt \n"
-"\t®Ó thùc hiÖn sao l­u. Tïy chän nµy cho \n"
-"\tphÐp sao l­u toµn bé d÷ liÖu lóc ban ®Çu, \n"
-"\tvµ chØ ®­îc thay ®æi sau nµy.\n"
-"\tSau ®ã, trong b­íc kh«i phôc, b¹n cã thÓ \n"
-"\tkh«i phôc d÷ liÖu tõ mét thêi ®iÓm cô\n"
-"\tthÓ.\n"
-"\tNÕu kh«ng chän tïy chän nµy, toµn bé\n"
-"\t¸c sao l­u nãi trªn sÏ bÞ xo¸ tr­íc mçi lÇn sao l­u. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"m« t¶ kh«i phôc:\n"
-" \n"
-"ChØ cã thêi gian gÇn ®©y nhÊt ®­îc chän, v× víi c¸c sao l­u \n"
-"míi, kh«ng cÇn thiÕt kh«i phôc sao l­u cò h¬n theo tõng b­íc.\n"
-"\n"
-"Do ®ã, nÕu kh«ng muèn kh«i phôc cho mét ng­êi dïng, h·y bá\n"
-"chän mäi hép kiÓm.\n"
-"\n"
-"NÕu kh«ng th× b¹n cã thÓ chØ chän mét thø.\n"
-"\n"
-" - C¸c sao l­u míi:\n"
-"\n"
-"\tSao l­u míi lµ mét tïy chän m¹nh nhÊt\n"
-"\tdïng ®Ó thùc hiÖn sao l­u, nã cho phÐp \n"
-"\tsao l­u toµn bé d÷ liÖu lóc ban ®Çu, vµ chØ\n"
-"\tbÞ thay ®æi sau nµy.\n"
-"\tDo ®ã, trong b­íc kh«i phôc, b¹n cã thÓ\n"
-"\tkh«i phôc d÷ liÖu tõ mét thêi ®iÓm vÒ thêi gian\n"
-"\tcô thÓ.\n"
-"\tNÕu ®· kh«ng chän tïy chän nµy, mäi sao\n"
-"\tl­u cò sÏ bÞ xo¸ tr­íc mçi lÇn sao l­u.    \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" B¶n quyÒn (C) 2001 cña MandrakeSoft viÕt bëi DUPONT Sebastien <dupont_s"
-"\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Ch­¬ng tr×nh nµy lµ phÇn mÒm miÔn phÝ; b¹n cã thÓ ph©n phèi l¹i hay\n"
-" thay ®æi d­íi c¸c ®iÒu kho¶n cña GNU/GPL nh­ Quü PhÇn\n"
-" MÒm Tù do ®· c«ng bè; víi phiªn b¶n 2, hay bÊt kú phiªn b¶n\n"
-" míi nhÊt nµo.\n"
-"\n"
-" Ch­¬ng tr×nh nµy ®­îc ph©n phèi víi hy väng lµ nã cã Ých,\n"
-" nh­ng Kh«ng Cã BÊt Kú B¶o §¶m Nµo; thËm chÝ kh«ng cã b¶o ®¶m vÒ\n"
-" Kh¶ N¨ng Th­¬ng M¹i hay ThÝch Hîp Víi Môc §Ých §Æc BiÖt Nµo.  H·y xem\n"
-" GNU/GPL ®Ó biÕt thªm chi tiÕt.\n"
-"\n"
-" B¹n nªn nhËn lÊy mét b¶n sao cña GNU/GPL ®i kÌm theo\n"
-" ch­¬ng tr×nh; nÕu kh«ng cã, xin viÕt th­ tíi: Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"M« t¶:\n"
-"\n"
-"  Drakbackup dïng ®Ó sao l­u hÖ thèng.\n"
-"  Trong khi cÊu h×nh, b¹n cã thÓ chän: \n"
-"\t- C¸c tËp tin hÖ thèng, \n"
-"\t- C¸c tËp tin ng­êi dïng, \n"
-"\t- C¸c tËp tin kh¸c.\n"
-"\thoÆc toµn bé hÖ thèng...  vµ thø kh¸c (nh­ ph©n vïng cña Windows)\n"
-"\n"
-"  Drakbackup cho phÐp thùc hiÖn sao l­u trªn:\n"
-"\t- §Üa cøng.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (tù khëi ®éng, cøu gi¶i, tù cµi ®Æt).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- B¨ng tõ.\n"
-"\n"
-"  Drakbackup cho phÐp kh«i phôc hÖ thèng tíi mét\n"
-"  th­ môc cña ng­êi dïng.\n"
-"\n"
-"  Theo mÆc ®Þnh, mäi sao l­u sÏ ®­îc kh«i phôc lªn\n"
-"  th­ môc /var/lib/drakbackup\n"
-"\n"
-"  TËp tin cÊu h×nh:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"B­íc kh«i phôc:\n"
-"  \n"
-"  Trong b­íc kh«i phôc, DrakBackup sÏ gì \n"
-"  bá th­ môc ban ®Çu vµ x¸c minh lµ mäi tËp \n"
-"  tin sao l­u kh«ng bÞ háng. KhuyÕn c¸o lµ b¹n \n"
-"  h·y thùc hiÖn sao l­u tr­íc khi kh«i phôc.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"M« t¶ c¸c tïy chän:\n"
-"\n"
-"H·y thËn träng khi sö dông sao l­u qua FTP, bëi v× chØ cã \n"
-"c¸c sao l­u ®· ®­îc t¹o ra míi ®­îc göi tíi m¸y chñ.\n"
-"Do ®ã, vµo lóc nµy, b¹n cÇn ph¶i t¹o b¶n sao l­u trªn æ cøng \n"
-"tr­íc khi göi nã tíi m¸y chñ.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"C¸c trôc trÆc khi kh«i phôc sao l­u:\n"
-"\n"
-"Trong b­íc kh«i phôc, Drakbackup sÏ x¸c minh toµn bé\n"
-"c¸c tËp tin sao l­u tr­íc khi kh«i phôc chóng.\n"
-"Tr­íc khi kh«i phôc, Drakbackup sÏ gì bá \n"
-"th­ môc ban ®Çu, vµ b¹n sÏ bÞ mÊt toµn bé d÷ liÖu. \n"
-"Quan träng lµ ph¶i cÈn thËn vµ kh«ng thay ®æi c¸c \n"
-"tËp tin sao l­u b»ng tay.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"M« t¶:\n"
-"\n"
-"  Drakbackup dïng ®Ó sao l­u hÖ thèng.\n"
-"  Trong lóc cÊu h×nh, b¹n cã thÓ chän: \n"
-"\t- C¸c tËp tin hÖ thèng, \n"
-"\t- C¸c tËp tin ng­êi dïng, \n"
-"\t- C¸c tËp tin kh¸c.\n"
-"\thoÆc lµ toµn bé hÖ thèng... vµ thø kh¸c (ph©n vïng cña Windows)\n"
-"\n"
-"  Drakbackup cho phÐp thùc hiÖn sao l­u trªn:\n"
-"\t- §Üa cøng.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (tù khëi ®éng, cøu gi¶i, tù cµi ®Æt).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- B¨ng tõ.\n"
-"\n"
-"  Drakbackup cho phÐp kh«i phôc hÖ thèng tíi mét\n"
-"  th­ môc ng­êi dïng ®· chän.\n"
-"\n"
-"  Theo mÆc ®Þnh, mäi sao l­u sÏ ®­îc cÊt trong th­ môc\n"
-"  /var/lib/drakbackup \n"
-"\n"
-"  TËp tin cÊu h×nh:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"B­íc kh«i phôc:\n"
-"  \n"
-"  Trong b­íc kh«i phôc, Drakbackup sÏ gì bá\n"
-"  th­ môc ban ®Çu vµ tiÕn hµnh x¸c minh lµ mäi\n"
-"  tËp tin sao l­u kh«ng bÞ háng. KhuyÕn c¸o lµ b¹n nªn\n"
-"  thùc hiÖn sao l­u tr­íc khi tiÕn hµnh kh«i phôc.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Kh«ng cµi ®Æt ®­îc %s. X¶y ra lçi nh­ sau:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "T×m c¸c ph«ng ch÷ ®· cµi ®Æt"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Bá chän c¸c ph«ng ch÷ ®· cµi ®Æt"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "ph©n tÝch toµn bé c¸c ph«ng ch÷"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "kh«ng t×m thÊy ph«ng ch÷ nµo"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hoµn thµnh"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "kh«ng t×m thÊy ph«ng ch÷ cã trong c¸c ph©n vïng ®· g¾n kÕt"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Chän l¹i c¸c ph«ng ch÷ ®óng"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "kh«ng t×m thÊy bÊt kú ph«ng ch÷ nµo.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "T×m ph«ng ch÷ trong danh s¸ch ®· cµi ®Æt"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Sao chÐp ph«ng ch÷"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Cµi ®Æt ph«ng True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "h·y ®îi khi ®ang thùc hiÖn ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Hoµn thµnh cµi ®Æt ph«ng True Type"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Sù chuyÓn ®æi c¸c ph«ng ch÷"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "t¹o cµi ®Æt Type1"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "chuyÓn giao cho Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "sù chuyÓn ®æi c¸c ph«ng ttf"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "sù chuyÓn ®æi c¸c ph«ng pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "TriÖt c¸c tËp tin t¹m thêi"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Khëi ch¹y l¹i XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "TriÖt c¸c tËp tin ph«ng ch÷"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "khëi ®éng l¹i xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Tr­íc khi cµi ®Æt bÊt kú ph«ng ch÷ nµo, h·y ®¶m b¶o lµ b¹n cã quyÒn dïng vµ "
-"cµi ®Æt chóng vµo hÖ thèng.\n"
-"\n"
-"-Cã thÓ cµi ®Æt ph«ng theo c¸ch th«ng th­êng. Trong mét sè hiÕm tr­êng hîp, "
-"ph«ng gi¶ sÏ lµm treo X Server."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "NhËp ph«ng ch÷"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "LÊy ph«ng tõ Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Bá cµi ®Æt ph«ng ch÷"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Tïy chän N©ng cao"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Danh s¸ch ph«ng"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "H·y chän c¸c øng dông sÏ hç trî cho c¸c ph«ng ch÷ :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "M¸y in Chung"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Chän tËp tin hay th­ môc chøa ph«ng råi nhÊn 'Thªm'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Danh s¸ch Cµi ®Æt"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "nhÊn vµo ®©y nÕu thÊy ®óng."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "ë ®©y nÕu kh«ng."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Mäi thø kh«ng ®­îc chän"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Mäi thø ®­îc chän"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Gìbá Danh s¸ch"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "C¸c test s¬ khëi"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Sao chÐp c¸c ph«ng ch÷ vµo hÖ thèng"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Cµi ®Æt&ChuyÓn ®æi ph«ng"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Sau Cµi ®Æt"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Gì bá ph«ng ch÷ trong hÖ thèng"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Sau Gì cµi ®Æt"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Chia SÎ KÕt Nèi Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "HiÖn t¹i chia sÎ kÕt nèi Internet ®ang ho¹t ®éng"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ThiÕt lËp chia sÎ kÕt nèi internet ®· ®­îc hoµn thµnh.\n"
-"HiÖn thêi nã ®ang ho¹t ®éng.\n"
-"\n"
-"B¹n muèn lµm g×?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "T¾t"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "g¹t bá"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "cÊu h×nh l¹i"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "®ang t¾t c¸c server..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "B©y giê chia sÎ kÕt nèi internet ®· t¾t."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "HiÖn thêi chia sÎ kÕt nèi internet kh«ng ®­îc bËt"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ThiÕt lËp chia sÎ kÕt nèi internet ®· hoµn thµnh.\n"
-"HiÖn t¹i kh«ng ho¹t ®éng.\n"
-"\n"
-"B¹n muèn lµm g×?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "cho ho¹t ®éng"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "®ang cho c¸c server ho¹t ®éng..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "B©y giê chia sÎ kÕt nèi internet cã thÓ ho¹t ®éng."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"B¹n s¾p cÊu h×nh cho m¸y tÝnh chia sÎ kÕt nèi Internet cña nã.\n"
-"Víi tÝnh n¨ng ®ã, c¸c m¸y kh¸c trong m¹ng côc bé cã thÓ sö dông kÕt nèi "
-"Internet cña m¸y tÝnh nµy.\n"
-"\n"
-"L­u ý: b¹n cÇn mét Adapter m¹ng dµnh cho viÖc thiÕt lËp mét m¹ng côc bé "
-"(LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Giao diÖn %s (®ang dïng module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Giao diÖn %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Kh«ng cã adapter m¹ng trong hÖ thèng cña b¹n!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Kh«ng cã adapter m¹ng ethernet ®­îc t×m thÊy trong hÖ thèng. H·y ch¹y c«ng "
-"cô cÊu h×nh phÇn cøng."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Giao diÖn m¹ng"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ChØ cã mét adapter m¹ng ®­îc cÊu h×nh trong hÖ thèng cña b¹n:\n"
-"\n"
-"%s\n"
-"\n"
-"ChuÈn bÞ thiÕt lËp m¹ng côc bé cña b¹n víi adapter ®ã."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "H·y chän adapter m¹ng nµo sÏ ®­îc kÕt nèi vµo m¹ng côc bé cña b¹n. "
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Giao diÖn m¹ng ®· ®­îc cÊu h×nh"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"C¶nh b¸o, bé ®iÒu hîp m¹ng (%s) ®· ®­îc cÊu h×nh.\n"
-"\n"
-"B¹n cã muèn tù ®éng cÊu h×nh l¹i?\n"
-"\n"
-"Cã thÓ thùc hiÖn b»ng tay nÕu b¹n biÕt râ c¸ch lµm."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Tù ®éng cÊu h×nh l¹i"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "HiÓn thÞ cÊu h×nh giao diÖn hiÖn thêi"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"CÊu h×nh hiÖnthêi cña `%s':\n"
-"\n"
-"M¹ng: %s\n"
-"§Þa chØ IP: %s\n"
-"Quy kÕt IP: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Cã thÓ gi÷ cÊu h×nh hiÖn thêi vµ cho r»ng server DHCP ®· ®­îc thiÕt lËp, "
-"trong tr­êng hîp®ã, h·y x¸c minh lµ M¹ng H¹ng C ®­îc ®äc chÝnh x¸c ®Ó dïng "
-"cho m¹ng côc bé. SÏ kh«ng cÊu h×nh l¹i vµ còng kh«ng ®ông ®Õn cÊuh×nh server "
-"DHCP.\n"
-"\n"
-"NÕu kh«ng th× cã thÓ cÊu h×nh l¹i giao diÖn vµ cÊu h×nh mét server DHCP ®Ó "
-"dïng.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "M¹ng Côc Bé H¹ng C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP cña server DHCP (nµy)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "CÊu h×nh l¹i giao diÖn vµ server DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "M¹ng Côc Bé ®· kh«ng kÕt thóc víi `.0', hÕt b¶o l·nh."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Kh¶ n¨ng xung ®ét ®Þa chØ LAN ®­îc t×m ra trong cÊu h×nh hiÖn thêi cña %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Ph¸t hiÖn ra cÊu h×nh t­êng löa!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"C¶nh b¸o! CÊu h×nh t­êng löa hiÖn thêi ®­îc ph¸t hiÖn. Cã thÓ b¹n cÇn Ên "
-"®Þnh thªm mét sè chi tiÕt sau khi cµi ®Æt."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "§ang cÊu h×nh..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "§ang cÊu h×nh c¸c script, cµi ®Æt phÇn mÒm, khëi ch¹y c¸c server..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "C¸c trôc trÆc cµi ®Æt gãi %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Mäi thø ®· ®­îc cÊu h×nh.\n"
-"B©y giê b¹n cã thÓ chia sÎ kÕt nèi Internet víi c¸c m¸y tÝnh kh¸c trong m¹ng "
-"côc bé cña b¹n, sö dông cÊu h×nh m¹ng tù ®éng (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "§· hoµn thµnh xong cµi ®Æt, nh­ng hiÖn t¹i nã kh«ng ®­îc ho¹t ®éng."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "§· hoµn thµnh xong cµi ®Æt, vµ hiÖn thêi nã ®­îc ho¹t ®éng."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ch­a cã mét chia sÎ kÕt nèi Internet nµo ®­îc cÊu h×nh."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "CÊu h×nh chia sÎ kÕt nèi Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Chµo mõng tiÖn Ých Chia SÎ KÕt Nèi Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"NhÊn  lªn CÊu h×nh ®Ó ch¹y ®å thuËt thiÕt lËp."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "CÊu h×nh m¹ng (c¸c bé ®iÒu hîp %d)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Lý lÞch: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Xo¸ lý lÞch..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Lý lÞch ®Ó xãa:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Lý lÞch míi..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Tªn lý lÞch ®Ó t¹o ra (lý lÞch míi ®­îc t¹o ra gièng nh­ mét b¶n sao cña lý "
-"lÞch hiÖn thêi) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Tªn m¸y chñ:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Truy cËp Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "KiÓu:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Cæng kÕt nèi:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Giao diÖn :"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "T×nh tr¹ng:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "H·y ®îi"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "CÊu h×nh truy cËp Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "CÊu h×nh LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Giao diÖn"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Giao thøc"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "T×nh tr¹ng"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "CÊu h×nh m¹ng côc bé..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "NhÊn vµo ®©y ®Ó ch¹y ®å thuËt ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "§å thuËt..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "¸p dông"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "H·y chê...®ang ¸p dông cÊu h×nh"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "§· kÕt nèi"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ch­a kÕt nèi"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "KÕt nèi..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Ng¾t kÕt nèi..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"C¶nh b¸o, ph¸t hiÖn thÊy mét kÕt nèi Internet kh¸c, cã thÓ lµ ®ang dïng m¹ng"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"B¹n kh«ng cã giao diÖn nµo ®· ®­îc ®Þnh cÊu h×nh.\n"
-"CÊu h×nh chóng b»ng c¸ch nhÊn vµo 'Configure'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "CÊu h×nh LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Giao thøc khëi ®éng"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "§­îc ch¹y lóc khëi ®éng "
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP client"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "KÝch ho¹t b©y giê"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "BÊt ho¹t b©y giê"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Giao diÖn nµy vÉn cßn ch­a ®­îc cÊu h×nh.\n"
-"H·y ch¹y ®å thuËt cÊu h×nh trong cöa sæ chÝnh"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"B¹n ch­a cã mét kÕt nèi internet nµo.\n"
-"H·y t¹o tr­íc mét kÕt nèi b»ng c¸ch nhÊn vµo 'Configure'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "CÊu h×nh kÕt nèi Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "CÊu H×nh KÕt Nèi Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "KiÓu kÕt nèi:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "C¸c th«ng sè"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Cæng kÕt nèi"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Card Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP Client"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "ThiÕt lËp møc b¶o mËt"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Trung t©m ®iÒu khiÓn"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Chän c«ng cô b¹n muèn dïng"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "§«ng ¢u"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Ireland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "T©y ¢u"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Newzealand"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Nam Phi"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Lµm ¬n,\n"
-"h·y gâ trong tiªu chuÈn TV vµ quèc gia cña b¹n"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Tiªu chuÈn TV :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Vïng :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "§ang tiÕn hµnh quÐt t×m c¸c kªnh TV..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "QuÐt t×m c¸c kªnh TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Kh«ng ph¸t hiÖn ®­îc card TV nµo!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Kh«ng ph¸t hiÖn ®­îc Card TV nµo trong m¸y. H·y kiÓm tra xem card TV/Video "
-"®­îc linux hç trî ®· ®­îc g¾n ®óng hay kh«ng.\n"
-"\n"
-"\n"
-"B¹n cã thÓ tham kh¶o c¬ së d÷ liÖu vÒ phÇn cøng t¹i:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "c¸ch dïng: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "H·y chän tæ chøc bµn phÝm"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "B¹n cã muèn phÝm BackSpace trë thµnh phÝm Delete trong console kh«ng?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Thay ®Üa CD"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"H·y n¹p ®Üa CD cµi ®Æt vµo æ ®Üa råi nhÊn OK khi n¹p xong.\n"
-"NÕu b¹n kh«ng cã ®Üa, nhÊn Bá qua ®Ó th«i kh«ng n©ng cÊp thùc."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kh«ng thÓ ch¹y n©ng cÊp thùc!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Thay ®æi ®· xong, nh­ng ®Ó cã hiÖu lùc b¹n ph¶i tho¸t ra"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "ChØ hiÓn thÞ víi ngµy ®­îc chän"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/TÖp/_Míi"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/TÖp/_Më"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/TÖp/_L­u"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/TÖp/L­u_lµ"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/TÖp/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Tïy chän"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Tïy chän/Ch¹y thö"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Gióp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Gióp/_VÒ..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Ng­êi dïng"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Th«ng ®iÖp"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "B¶n ghi hÖ thèng"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Chó gi¶i c¸c C«ng Cô cña Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "t×m kiÕm"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "C«ng cô xem b¶n ghi"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "C¸c thiÕt lËp"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "lµm khíp nhau"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "nh­ng kh«ng khíp"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Chän tËp tin"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "LÞch"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Néi dung tËp tin"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "C¶nh b¸o Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "H·y ®îi, ®ang ph©n tÝch tËp tin: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "CÊu h×nh c¶nh b¸o Mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Chµo mõng tiÖn Ých cÊu h×nh Mail/SMS.\n"
-"\n"
-"T¹i ®©y, cã thÓ thiÕt lËp hÖ thèng c¶nh b¸o.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "Proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "thiÕt lËp dÞch vô"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "B¹n sÏ nhËn ®­îc c¶nh b¸o nÕu mét dÞch vô nµo ®ã kh«ng ch¹y n÷a"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "n¹p thiÕt lËp"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "B¹n sÏ nhËn ®­îc c¶nh b¸o nÕu t¶i cao h¬n gi¸ trÞ nµy"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "CÊu h×nh c¶nh b¸o"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "CÊu h×nh c¸ch mµ hÖ thèng dïng ®Ó c¶nh b¸o"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "L­u lµ.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "H·y chän kiÓu chuét"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Kh«ng thÊy serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "M« pháng nót thø ba?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "Kh«ng thÊy %s trªn %s, cÊu h×nh nã kh«ng ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Chän m¸y quÐt"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "M¸y quÐt %s nµy kh«ng ®­îc hç trî"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake ®· kh«ng thÓ ph¸t hiÖn m¸y quÐt %s cña\n"
-"b¹n. H·y chän thiÕt bÞ n¬i mµ m¸y quÐt ®­îc nèi vµo"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "Chän thiÕt bÞ"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"M¸y quÐt %s nµy ph¶i ®­îc cÊu h×nh b»ng printerdrake.\n"
-"Cã thÓ ch¹y printerdrake trong môc PhÇn cøng t¹i Trung t©m §iÒu khiÓn "
-"Mandrake."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"M¸y quÐt %s ®· ®­îc cÊu h×nh.\n"
-"B©y giê cã thÓ quÐt c¸c tµi liÖu b»ng ``XSane'' tõ menu cña c¸c øng dông ®å "
-"häa vµ ®a ph­¬ng tiÖn."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "CÊu h×nh T­êng löa"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "CÊu h×nh t­êng löa"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"T­êng löa\n"
-"\n"
-"B¹n ®· thiÕt lËp t­êng löa råi.\n"
-"NhÊp chuét lªn CÊu h×nh ®Ó thay ®æi hoÆc bá t­êng löa"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"T­êng löa\n"
-"\n"
-"NhÊp chuét lªn CÊu h×nh ®Ó thiÕt lËp mét t­êng löa chuÈn"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Chän ng«n ng÷"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Chän kiÓu cµi ®Æt"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Dß t×m æ ®Üa cøng"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "CÊu h×nh chuét"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Chän bµn phÝm"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "B¶o mËt"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "ThiÕt lËp filesystems"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Format c¸c ph©n vïng"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Chän c¸c gãi cµi ®Æt"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Cµi ®Æt hÖ thèng"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Thªm ng­êi dïng"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "CÊu h×nh m¹ng lµm viÖc"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "CÊu h×nh c¸c dÞch vô"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Cµi ®Æt tr×nh khëi ®éng"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "T¹o ®Üa khëi ®éng"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "CÊu h×nh X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Cµi ®Æt c¸c cËp nhËt hÖ thèng"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Tho¸t khái cµi ®Æt"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Ch­¬ng tr×nh cÊu h×nh t­êng löa nhá\n"
-"\n"
-"Ch­¬ng tr×nh nµy cÊu h×nh mét t­êng löa c¸ nh©n cho Mandrake Linux.\n"
-"VÒ gi¶i ph¸p t­êng löa m¹nh vµ chuyªn dông, h·y quan t©m tíi ph©n phèi\n"
-"t­êng löa b¶o mËt chuyªn dông cña Mandrake."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"B©y giê b¹n sÏ ®­îc hái vÒ nh÷ng dÞch vô nµo mµ b¹n sÏ cho phÐp\n"
-"Internet kÕt nèi vµo.  H·y thËn träng suy nghÜ c¸c c©u hái nµy\n"
-"v× vÊn ®Ò anh ninh cho m¸y tÝnh cña b¹n lµ quan träng.\n"
-"\n"
-"NÕu hiÖn t¹i b¹n kh«ng sö dông mét trong c¸c dÞch vô nµy, h·y\n"
-"ng¨n nã l¹i b»ng t­êng löa. B¹n cã thÓ thay ®æi cÊu h×nh nµy\n"
-"bÊt kú khi nµo b¹n muèn b»ng c¸ch ch¹y l¹i øng dông nµy!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Cã ph¶i b¹n ®ang ch¹y m¸y chñ web trªn m¸y tÝnh nµy v× b¹n cÇn toµn\n"
-"bé Internet tr«ng thÊy? NÕu b¹n ®ang ch¹y mét m¸y chñ web mµ chØ cÇn\n"
-"®­îc truy cËp b»ng mµy tÝnh nµy, b¹n cã thÓ an t©m tr¶ lêi Kh«ng ë ®©y.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Cã ph¶i b¹n ®ang ch¹y mét m¸y chñ tªn miÒn trªn m¸y nµy? NÕu b¹n\n"
-"kh«ng thiÕt lËp ®Ó cung cÊp th«ng tin IP vµ vïng cho toµn bé Internet,\n"
-"h·y tr¶ lêi Kh«ng.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"B¹n cã muèn cho phÐp kÕt nèi Secure Shell (ssh) ®i vµo? §©y\n"
-"lµ mét thay thÕ telnet mµ b¹n cã thÓ dïng ®Ó ®¨ng nhËp vµo.\n"
-"NÕu b¹n ®ang dïng telnet, b¹n nªn døt kho¸t chuyÓn ssh. telnet\n"
-"kh«ng ®­îc m· ho¸ -- cho nªn mét sè kÎ cã thÓ ¨n c¾p mËt khÈu cña\n"
-"b¹n. Dïng ssh ®­îc m· ho¸ ®Ó kh«ng cho phÐp viÖc nghe trém nµy."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"B¹n cã muèn cho phÐp kÕt nèi telnet ®i vµo?\n"
-"§iÒu nµy rÊt kh«ng an toµn vµ ®· ®­îc gi¶i thÝch ë mµn h×nh tr­íc.\n"
-"B¹n rÊt nªn tr¶ lêi Kh«ng ë ®©y vµ h·y dïng ssh trong\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"B¹n ®ang ch¹y m¸y chñ FTP ®Ó cho phÐp truy cËp qua internet?\n"
-"NÕu ®óng, b¹n rÊt nªn chØ sö dông cho viÖc truyÒn (d÷ liÖu) nÆc danh.\n"
-"C¸c mËt khÈu ®­îc göi b»ng FTP cã thÓ bÞ ®¸nh c¾p bëi mét sè kÎ\n"
-"xÊu, v× FTP còng kh«ng sö dông m· hãa ®Ó truyÒn mËt khÈu.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"B¹n ®ang ch¹y m¸y chñ th­ tÝn? NÕu b¹n göi c¸c th«ng ®iÖp\n"
-"qua pine, mutt hoÆc bÊt cø mét ch­¬ng tr×nh th­ client dùa trªn\n"
-"v¨n b¶n, cã lÏ b¹n ®ang ch¹y. NÕu kh«ng, b¹n nªn ng¨n nã l¹i b»ng t­êng "
-"löa.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"B¹n ®ang ch¹y m¸y chñ POP hoÆc IMAP? B¹n nªn dïng\n"
-"®Ó qu¶n lý c¸c account th­ tÝn kh«ng dùa trªn nÒn web cho\n"
-"mäi ng­êi th«ng qua m¸y nµy.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"H×nh nh­ b¹n ®ang ch¹y víi kernel 2.2. NÕu IP m¹ng cña\n"
-"b¹n thiÕt lËp tù ®éng b»ng mét m¸y tÝnh t¹i nhµ hay c¬ quan\n"
-"(®­îc thiÕt kÕ ®éng), h·y cho phÐp ®iÒu nµy.  Cã ph¶i\n"
-"lµ nh­ vËy kh«ng?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Cã ph¶i m¸y tÝnh cña b¹n ®ång bé ho¸ thêi gian víi mét m¸y kh¸c\n"
-"kh«ng? PhÇn lín, ®iÒu nµy ®­îc dïng bëi c¸c tæ chøc Unix/Linux\n"
-"cì lín vµ trung b×nh ®Ó ®ång bé thêi gian cho b¶n ghi vµ t­¬ng tù.\n"
-"NÕu b¹n kh«ng trong c¸c tæ chøc nh­ vËy, b¹n cã lÏ\n"
-"kh«ng dïng."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Hoµn thµnh viÖc cÊu h×nh. Cã thÓ ghi c¸c thay ®æi nµy lªn ®Üa?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kh«ng më ®­îc %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kh«ng më ®­îc %s ®Ó ghi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Kh«ng, kh«ng cÇn DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Cã, cÇn DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Kh«ng, kh«ng cÇn NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Cã, cÇn NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Kh«ng l­u l¹i"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "L­u l¹i & Tho¸t"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "§å thuËt CÊu h×nh T­êng löa"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Kh«ng (chÆn nã khái Internet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Cã (cho phÐp ®i qua t­êng löa)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "H·y chê... §ang x¸c minh c¸c gãi ®­îc cµi ®Æt."
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Kh«ng cµi ®Æt ®­îc c¸c gãi cÇn thiÕt: %s vµ Bastille.\n"
-" H·y thö cµi ®Æt thñ c«ng."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "M¸y tÝnh m¹ng (kh¸ch)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "M¸y chñ NFS, SMB, SSH, ñy nhiÖm"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "V¨n phßng"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Tr¹m lµm viÖc GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "C«ng cô cho Palm Pilot hoÆc Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Tr¹m lµm viÖc"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "T­êng löa/§Þnh tuyÕn"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Tªn cña tªn vïng vµ Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"C¸c ch­¬ng tr×nh v¨n phßng: wordprocessors (kword, abiword), spreadsheets "
-"(kspread, gnumeric), pdf viewers, v.v..."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "C¸c c«ng cô ©m thanh: mp3 hay midi players, mixers,v.v..."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "C¸c s¸ch, how-to cho Linux vµ phÇn mÒm miÔn phÝ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Tr¹m lµm viÖc KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, v.v..."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "§a ph­¬ng tiÖn - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "ThiÕt lËp c«ng cô cho th­, tin tøc, web, truyÒn tËp tin, vµ trß chuyÖn"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "C¬ së d÷ liÖu"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL hay MySQL m¸y chñ c¬ së d÷ liÖu"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "C«ng cô xo¸ cÊu h×nh m¸y tÝnh cña b¹n"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "§a ph­¬ng tiÖn-¢m thanh"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "C¸c tiÖn Ých"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Tµi liÖu"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "C¸c c«ng cô console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "M¸y chñ th­ Postfix , M¸y chñ news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Tr¹m Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Tr¹m ®a ph­¬ng tiÖn"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "CÊu h×nh"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Thªm mµn h×nh nÒn ®å häa (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, mét m«i tr­êng ®å häa víi mét s­u tËp tiÖn Ých ®i kÌm"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "M«i tr­êng ®å ho¹"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache vµ Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "C¸c tiÖn Ých t¹o vµ ghi CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Tr¹m lµm viÖc v¨n phßng"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "M¸y chñ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm,v.v..."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "C¸c ch­¬ng tr×nh ®å ho¹ nh­ lµ Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"C¸c th­ viÖn ph¸t triÓn C vµ C++, c¸c ch­¬ng tr×nh vµ c¸c tËp tin ®i kÌm"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "M¸y chñ m¹ng"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Th­/PhÇn mÒm nhãm/Tin tøc"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Tr¹m trß ch¬i"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "C¸c tr×nh ch¬i Video vµ so¹n th¶o"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "§a ph­¬ng tiÖn-§å ho¹"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "C¸c ch­¬ng tr×nh gi¶i trÝ: arcade, boards, strategy, v.v..."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"C¸c c«ng cô ®äc vµ göi th­ tÝn vµ tin tøc (pine, mutt, tin..) vµ ®Ó duyÖt Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "CÊt gi÷, m« pháng, theo dâi "
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Tµi chÝnh c¸ nh©n"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"M«i tr­êng ®å häa th©n thiÖn cho c¸c øng dông vµ c¸c tiÖn Ých mµn h×nh nÒn"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "M¸y kh¸ch cho c¸c giao thøc kh¸c bao gåm ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Cæng kÕt nèi Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "C¸c ch­¬ng tr×nh ch¬i Audio-Video/so¹n th¶o"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "C¸c mµn h×nh nÒn ®å ho¹ kh¸c"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "C¸c tr×nh so¹n th¶o, c¸c tiÖn Ých tËp tin, c¸c thiÕt bÞ ®Çu cuèi"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "C¸c ch­¬ng tr×nh qu¶n lý tµi chÝnh cña b¹n, nh­ lµ gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Qu¶n lý th«ng tin c¸ nh©n"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "§a ph­¬ng tiÖn - Ghi CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tr¹m lµm viÖc khoa häc"
-
-#~ msgid "About"
-#~ msgstr "Nãi vÒ"
-
-#~ msgid "             Help           "
-#~ msgstr "           Trî gióp         "
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "XawTV ch­a ®­îc cµi ®Æt\n"
-#~ "B¹n nªn cµi ®Æt nã.\n"
-#~ " H·y gâ \"urpmi xawtv\""
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Kh«ng thÓ truy cËp c¸c m«-®un kernel t­¬ng øng víi Kernel (thiÕu file %s)"
-
-#~ msgid "None"
-#~ msgstr "Kh«ng"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Chän m¸y in mÆc ®Þnh!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "G¾n/§äc l¹i c¸c m¸y in"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "B©y giê b¹n cã thÓ göi tïy chän ®Õn module %s."
-
-#~ msgid "mount failed"
-#~ msgstr "G¾n kÕt kh«ng ®­îc"
-
-#~ msgid "Low"
-#~ msgstr "ThÊp"
-
-#~ msgid "Medium"
-#~ msgstr "Trung b×nh"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Mét Ýt c¶i thiÖn cho møc ®é b¶o mËt, chñ yÕu cã thªm kiÓm tra vµ\n"
-#~ "c¸c c¶nh b¸o b¶o mËt."
-
-#~ msgid "Art and Multimedia"
-#~ msgstr "NghÖ thuËt vµ §a ph­¬ng tiÖn"
-
-#~ msgid ""
-#~ "A total of 11 different user interfaces are provided, including GNOME "
-#~ "1.4, KDE 2.2.2, Window Maker, ..."
-#~ msgstr ""
-#~ "Víi tæng sè 11 giao diÖn ng­êi dïng kh¸c nhau, bao gåm GNOME 1.4, KDE "
-#~ "2.2.2, Window Maker, ..."
-
-#~ msgid ""
-#~ "To access to more commercial informations, please contact us on the "
-#~ "following toll free:"
-#~ msgstr ""
-#~ "§Ó truy cËp thªm th«ng tin th­¬ng m¹i, h·y liªn hÖ víi chóng t«i b»ng c¸c "
-#~ "h×nh thøc miÔn phÝ sau ®©y:"
-
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "§Ó biÕt vÒ c¸c tïy chän cã sÎn cho m¸y in hiÖn hµnh ®äc danh s¸ch ®­îc "
-#~ "hiÓn thÞ d­íi ®©y hoÆc nhÊn nót \"Danh s¸ch tïy chän m¸y in\". %s\n"
-#~ "\n"
-
-#~ msgid "Boot mode"
-#~ msgstr "ChÕ ®é khëi ®éng"
-
-#~ msgid "Export"
-#~ msgstr "XuÊt"
-
-#~ msgid "click here"
-#~ msgstr "nhÊp chuét vµo ®©y"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr ""
-#~ "M¸y quÐt %s dïng cæng song song, nã ch­a ®­îc hç trî vµo thêi ®iÓm nµy"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux qu¶n lý thêi gian theo GMT (Greenwich Mean Time)\n"
-#~ "vµ chuyÓn ®æi nã sang giê ®Þa ph­¬ng dùa vµo mói giê b¹n chän."
-
-#~ msgid ""
-#~ "You may choose to upload updated packages that have been released after "
-#~ "the\n"
-#~ "distribution has been made available. You will get security fixes or bug\n"
-#~ "fixes, but you need to have an Internet connection configured to "
-#~ "proceed.\n"
-#~ "Answer \"Yes\" to the dialog to choose an available mirror. After "
-#~ "choosing\n"
-#~ "a mirror, a packages selection tree appears to allow you to choose "
-#~ "packages\n"
-#~ "individually, package that need to be updated are already selected, but "
-#~ "you\n"
-#~ "may choose to install other package or deselect packages. Press \"Install"
-#~ "\"\n"
-#~ "to install the updated package or \"Cancel\" not to upgrade them. (this\n"
-#~ "*REALLY* need to be modified according to real DrakX, if you need other\n"
-#~ "help section, let us (DrakX team developer) known)."
-#~ msgstr ""
-#~ "Cã thÓ chän c¸c gãi tin cËp nhËt t¶i lªn ®· ®­îc ph¸t hµnh sau khi ph©n "
-#~ "phèi\n"
-#~ "Linux Mandrake nµy ®­îc lµm xong. B¹n sÏ ®­îc nhËn c¸c söa lçi b¶o mËt\n"
-#~ "hay gì rèi, nh­ng cÇn ph¶i cã mét cÊu h×nh kÕt nèi víi Internet ®Ó thùc "
-#~ "hiÖn.\n"
-#~ "Tr¶ lêi \"Cã\" trong hép tho¹i ®Ó chän mét mirror sÎn cã. Sau khi ®· chän "
-#~ "mét\n"
-#~ "mirror, xuÊt hiÖn mét c©y c¸c gãi tin ®Ó chän sÏ cho phÐp b¹n chän c¸c "
-#~ "gãi\n"
-#~ "tin riªng, gãi tin cÇn cËp nhËt ®· ®­îc chän, nh­ng b¹n cã thÓ chän cµi "
-#~ "®Æt\n"
-#~ "c¸c gãi tin kh¸c hoÆc cã thÓ bá chän c¸c gãi tin. H·y nhÊn nót \"Cµi ®Æt"
-#~ "\"\n"
-#~ "®Ó thùc hiÖn cµi ®Æt gãi tin cËp nhËt hoÆc lµ nhÊn \"Bá qua\" ®Ó kh«ng "
-#~ "n©ng\n"
-#~ "cÊp chóng. (§iÒu nµy *ThËt Sù* cÇn ®­îc thay ®æi tïy theo DrakX, nÕu cÇn\n"
-#~ "phÇn trî gióp kh¸c, xin cho chóng t«i biÕt (DrakX team developer))."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "KÕt nèi vµo Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Ng¾t kÕt nèi ra khái Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "CÊu h×nh kÕt nèi m¹ng (LAN hay Internet)"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Ph¸t hiÖn ®­îc %s, cã muèn thiÕt lËp nã kh«ng?"
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "H·y chän m¸y in b¹n muèn cµi ®Æt."
-
-#~ msgid "Infos"
-#~ msgstr "Th«ng tin"
-
-#~ msgid "Windows Importation"
-#~ msgstr "NhËp tõ Windows"
-
-#~ msgid "authentification"
-#~ msgstr "sù x¸c nhËn"
-
-#~ msgid "user"
-#~ msgstr "ng­êi dïng"
-
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "H·y chän m¸y in vµ cæng m¸y in.\n"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "§ang rµ c¸ch thøc chia sÎ NFS sÎn cã"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "§ang rµ c¸ch thøc chia sÎ NFS sÎn cã cña m¸y chñ %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "§ang rµ c¸ch thøc chia sÎ samba sÎn cã"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "§ang rµ c¸ch thøc chia sÎ samba sÎn cã cña m¸y chñ %s"
-
-#~ msgid "\\@quit"
-#~ msgstr "\\@tho¸t"
-
-#~ msgid "Removable media"
-#~ msgstr "Ph­¬ng tiÖn th¸o l¾p"
-
-#~ msgid "Active"
-#~ msgstr "Ho¹t ®éng"
-
-#~ msgid "No X"
-#~ msgstr "Kh«ng X"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "M¸y in kiÓu \"%s\", ®­îc ph¸t hiÖn t¹i"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "ThiÕt bÞ in côc bé"
-
-#~ msgid "Printer Device"
-#~ msgstr "ThiÕt bÞ m¸y in"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "ThiÕu tªn ThiÕt bÞ/TËp tin!"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "M¸y in cña m¸y chñ CUPS ë xa"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "M¸y in cña m¸y chñ ë xa"
-
-#~ msgid " Linux "
-#~ msgstr " Linux "
-
-#~ msgid " System "
-#~ msgstr " HÖ thèng "
-
-#~ msgid " Other "
-#~ msgstr " Kh¸c "
-
-#~ msgid "please choose your CD space"
-#~ msgstr "H·y chän kh«ng gian ®Üa CD"
-
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "H·y chän nÕu ®ang dïng CD-Rewriter"
-
-#~ msgid " Tape "
-#~ msgstr " B¨ng tõ "
-
-#~ msgid " Use .backupignore files"
-#~ msgstr " Dïng c¸c tËp tin .backupignore"
-
-#~ msgid "Configure it"
-#~ msgstr "CÊu h×nh nã"
-
-#~ msgid "on Tape Device"
-#~ msgstr "trªn ThiÕt bÞ B¨ng tõ"
-
-#~ msgid " Cancel "
-#~ msgstr " Bá qua "
-
-#~ msgid " Ok "
-#~ msgstr " OK "
-
-#~ msgid "close"
-#~ msgstr "®ãng"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "§ang khëi ®éng kÕt nèi..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "§ang ®ãng kÕt nèi..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "KÕt nèi ch­a ®­îc ®ãng.\n"
-#~ "Thö ®ãng b»ng c¸ch ch¹y\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "trong root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "HÖ thèng b©y giê ®É ®­îc ng¾t kÕt nèi"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Chän kÝch th­íc b¹n muèn cµi ®Æt"
-
-#~ msgid "Total size: "
-#~ msgstr "Tæng sè kÝch th­íc:"
-
-#~ msgid "Please wait, "
-#~ msgstr "H·y ®îi,"
-
-#~ msgid "Total time "
-#~ msgstr "Tæng sè thêi gian"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Dïng cÊu h×nh hiÖn cã cho X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "M¸y in cña b¹n ®­îc nèi víi thiÕt bÞ nµo?\n"
-#~ "(l­u ý lµ  /dev/lp0 t­¬ng ®­¬ng víi LPT1:)\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "C¶nh b¸o, adapter m¹ng ®· ®­îc cÊu h×nh råi. T«i sÏ cÊu h×nh l¹i nã."
-
-#~ msgid "New"
-#~ msgstr "Míi"
-
-#~ msgid "Remote"
-#~ msgstr "Tõ xa"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "H·y nhÊp chuét lªn mét nót trªn\n"
-#~ "\n"
-#~ "HoÆc dïng \"Míi\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "NÕu danh s¸ch trªn kh«ng cã môc nhËp nh­ mong muèn, h·y nhËp ë ®©y:"
-
-#~ msgid "Shared resource"
-#~ msgstr "Tµi nguyªn dïng chung"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Kh«ng râ (%s), h·y lµm chÝnh x¸c h¬n\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (mÆc ®Þnh %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "Lùa chän cña b¹n? (mÆc ®Þnh %s  nhËp `kh«ng cã' khi kh«ng cã) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kh«ng thÓ më /etc/sysconfig/autologin ®Ó ®äc: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "B¹n cã muèn khëi ®éng l¹i m¹ng"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "B¹n ®ång ý kh«ng?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "ChuÈn bÞ khëi ®éng l¹i thiÕt bÞ m¹ng:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "chuÈn bÞ khëi ®éng l¹i thiÕt bÞ m¹ng%s. B¹n ®ång ý kh«ng?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Trõ khi b¹n biÕt c¸ch kh¸c, sù lùa chän th«ng th­êng lµ \"/dev/hda\"\n"
-#~ "(æ ®Üa IDE chÝnh thø nhÊt) hay \"/dev/sda\" (æ SCSI thø nhÊt)."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "HÕt thêi gian kÕt nèi (theo gi©y) [beta, cßn ch­a thùc thi]"
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux chøa trong vµi CDROM. Do ®ã cã thÓ drakX chän\n"
-#~ "c¸c gãi n»m trªn mét CDROM kh¸c víi CDROM cµi ®Æt, vµ khi nã\n"
-#~ "yªu cÇu b¹n n¹p mét CD kh¸c vµo æ ®Üa, nã sÏ nh¶ CDROM hiÖn t¹i ra\n"
-#~ "vµ yªu cÇu b¹n n¹p ®Üa kh¸c vµo."
-
-#~ msgid ""
-#~ "drakX just skips this test unless you purposely click on the "
-#~ "corresponding step\n"
-#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
-#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
-#~ "\n"
-#~ "Perhaps this is not what you want. In that case, you just have to select "
-#~ "the\n"
-#~ "right type for your mouse in the list which appears.\n"
-#~ "\n"
-#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
-#~ "are\n"
-#~ "good. If not, you can click on \"Cancel\" to choose another driver."
-#~ msgstr ""
-#~ "drakX sÏ bá qua viÖc ch¹y thö nµy trõ khi b¹n nhÊn chuét vµo c¸c b­íc "
-#~ "t­¬ng\n"
-#~ "øng bªn tr¸i. Theo mÆc ®Þnh, drakX coi chuét cña b¹n lµ lo¹i 2 nót vµ\n"
-#~ "m« pháng nót thø ba, vµ biÕt nã lµ lo¹i chuét g×: PS/2, serial hay USB.\n"
-#~ "\n"
-#~ "Nh­ng cã thÓ ®ã kh«ng ph¶i lµ c¸i b¹n muèn. Tr­êng hîp nµy, b¹n ph¶i "
-#~ "chän\n"
-#~ "®óng lo¹i chuét cña b¹n trong danh s¸ch hiÓn thÞ.\n"
-#~ "\n"
-#~ "B©y giê cã thÓ ch¹y thö chuét. H·y dïng c¸c nót vµ b¸nh xe ®Ó xem thiÕt "
-#~ "lËp\n"
-#~ "®· ®­îc ch­a. NÕu ch­a, nhÊn chuét lªn \"Bá qua\" ®Ó chän driver kh¸c."
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Kh«ng thÓ thiÕt lËp \"%s\" lµm m¸y in mÆc ®Þnh!"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "H·y kiÓm tra chuét ë ®©y."
-
-#~ msgid "Press next to continue."
-#~ msgstr "NhÊn TiÕp theo ®Ó tiÕp tôc."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "H·y chän ng«n ng÷ phï hîp ®Ó cµi ®Æt vµ sö dông hÖ thèng."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "B¹n cÇn chÊp thuËn c¸c ®iÒu kho¶n trong giÊy phÐp kÓ trªn ®Ó tiÕp tôc cµi "
-#~ "®Æt.\n"
-#~ "\n"
-#~ "\n"
-#~ "NhÊn chuét lªn \"ChÊp thuËn\" nÕu b¹n ®ång ý.\n"
-#~ "\n"
-#~ "\n"
-#~ "NhÊn chuét lªn \"Tõ chèi\" nÕu b¹n kh«ng ®ång ý. ViÖc cµi ®Æt sÏ kÕt thóc "
-#~ "vµ hÖ thèng hiÖn cã vÉn ®­îc gi÷ nguyªn\n"
-#~ "cña b¹n."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "H·y chän tæ chøc bµn phÝm thÝch hîp tõ danh s¸ch trªn"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "NÕu b¹n muèn dïng ng«n ng÷ kh¸c (víi ng«n ng÷ b¹n chän ë\n"
-#~ "lóc b¾t ®Çu cµi ®Æt) th× còng thùc hiÖn ®­îc sau cµi ®Æt, h·y chän\n"
-#~ "ë danh s¸ch trªn. NÕu b¹n muèn chän tÊt c¶, chØ viÖc chän \"Toµn bé\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ "    the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ "    perform a highly customized installation. As for a \"Customized\"\n"
-#~ "    installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Chän:\n"
-#~ "\n"
-#~ "  - Tïy chØnh: nÕu b¹n quen thuéc víi GNU/Linux, b¹n cã thÓ chän\n"
-#~ "    môc ®Ých dïng chÝnh cho m¸y cña b¹n. Xem chi tiÕt bªn d­íi.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Chuyªn gia: B¹n n¾m v÷ng GNU/Linux vµ muèn\n"
-#~ "    thùc hiÖn kiÓu cµi ®Æt cã tÝnh tïy chän cao. Nh­ víi kiÓu \"Tïy chØnh"
-#~ "\"\n"
-#~ "    b¹n cã thÓ chän môc ®Ých sö dông cho hÖ thèng cña b¹n.\n"
-#~ "    Nh­ng h·y thËt l­u ý: kh«ng nªn chän kiÓu nµy trõ khi b¹n biÕt c«ng "
-#~ "viÖc ®ang lµm!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "  at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "  will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ "  or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "B©y giê b¹n ph¶i ®Þnh râ môc ®Ých sö dông m¸y. Víi c¸c lùa chän lµ:\n"
-#~ "\n"
-#~ "* Tr¹m lµm viÖc: kiÓu nµy phï hîp nÕu b¹n dïng m¸y tÝnh chñ yÕu cho c«ng "
-#~ "viÖc hµng ngµy, t¹i c¬ quan hay\n"
-#~ "  t¹i nhµ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ph¸t triÓn: nÕu b¹n muèn sö dông m¸y tÝnh chñ yÕu ®Ó ph¸t triÓn phÇn "
-#~ "mÒm, ®©y lµ sù lùa chän tèt. B¹n\n"
-#~ "  sÏ cã mét tËp hîp phÇn mÒm hoµn chØnh ®­îc cµi ®Æt ®Ó biªn dÞch, gì "
-#~ "rèi, ®Þnh d¹ng m· nguån,\n"
-#~ "  hoÆc t¹o c¸c gãi øng dông.\n"
-#~ "\n"
-#~ "\n"
-#~ "* M¸y chñ: nÕu b¹n muèn m¸y tÝnh lµ m¸y chñ, ®ã lµ sù lùa chän tèt. M¸y "
-#~ "chñ chia xÎ tËp tin (NFS hay\n"
-#~ "  SMB), m¸y chñ in Ên (kiÓu Unix hay Microsoft Windows), m¸y chñ x¸c thùc "
-#~ "(NIS), m¸y chñ\n"
-#~ "  c¬ së dò liÖu vµ v©n v©n... Nh­ng b¹n ®õng tr«ng mong cã bÊt kú gimmick "
-#~ "nµo (KDE, GNOME, v.v...) ®­îc cµi ®Æt."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ chän nhãm c¸c gãi (øng dông) mµ b¹n muèn\n"
-#~ "cµi ®Æt hay n©ng cÊp.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX sau ®ã sÏ kiÓm tra xem b¹n cã ®ñ kh«ng gian ®Ó cµi ®Æt tÊt c¶ chóng "
-#~ "kh«ng. NÕu kh«ng,\n"
-#~ "b¹n sÏ ®­îc th«ng b¸o. NÕu b¹n vÉn cø muèn thùc hiÖn , qu¸ tr×nh cµi ®Æt "
-#~ "vÉn\n"
-#~ "thùc hiÖn víi c¸c gãi øng dông ®­îc chän nh­ng mét sè sÏ bÞ bá r¬i vµ sÏ "
-#~ "kÐm\n"
-#~ "chøc n¨ng h¬n. PhÝa cuèi danh s¸ch, b¹n cã thÓ chän tïy chän \n"
-#~ "\"C¸c gãi chän riªng\"; trong tr­êng hîp nµy b¹n sÏ ph¶i duyÖt qua\n"
-#~ "h¬n 1000 gãi..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ chän riªng tÊt c¶ c¸c gãi mµ b¹n muèn\n"
-#~ "cµi ®Æt.\n"
-#~ "\n"
-#~ "\n"
-#~ "B¹n cã thÓ më réng hay thu hÑp c©y th­ môc b»ng nhÊp chuét lªn c¸c tïy "
-#~ "chän ë gãc tr¸i cña cöa sæ \n"
-#~ "danh s¸ch c¸c gãi.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n muèn xem danh s¸nh c¸c gãi theo vÇn ch÷ c¸i, nhÊp chuét lªn biÓu "
-#~ "t­îng\n"
-#~ "\"ChuyÓn gi÷a d·y vµ nhãm ®­îc ph©n lo¹i\".\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n kh«ng muèn xem th«ng b¸o vÒ c¸c phô thuéc, nhÊp chuét lªn \"X¸c "
-#~ "®Þnh\n"
-#~ "phô thuéc tù ®éng\". NÕu b¹n chän kiÓu nµy, mét gãi kh«ng ®­îc chän cã "
-#~ "thÓ n¹p theo vµi\n"
-#~ "gãi kh«ng ®­îc chän kh¸c phô thuéc vµo nã mét c¸ch ngÊm ngÇm."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "NÕu b¹n cã ®ñ ®Üa CD trong danh s¸ch trªn, nhÊp OK. NÕu b¹n kh«ng cã\n"
-#~ "c¸c CD nµy, nhÊp Bá qua. NÕu chØ thiÕu vµi CD , bá chän chóng,\n"
-#~ "råi nhÊp OK."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons.  This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "H·y ch¹y thö chuét. Sö dông c¸c nót vµ b¸nh xe ®Ó kiÓm tra xem\n"
-#~ "thiÕt lËp ®· ®­îc ch­a. NÕu ch­a, nhÊn lªn \"Bá qua\" ®Ó chän mét driver\n"
-#~ "kh¸c.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu ®ang thùc hiÖn cµi ®Æt trªn m¸y Apple cã chuét mét nót, b¹n sÏ cã\n"
-#~ "®iÒu kiÖn ®Þnh nghÜa mét sè phÝm cña bµn phÝm ®Ó m« pháng c¸c nót chuét\n"
-#~ "thø hai vµ thø ba. §iÒu nµy cho phÐp b¹n sö dông ®Çy ®ñ tÝnh n¨ng cña "
-#~ "chuét\n"
-#~ "trong c¶ console vµ giao diÖn ng­êi dïng ®å häa X Window.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu lµ chuét ADB, h·y chän USB, nh©n kernel Linux sÏ thùc hiÖn\n"
-#~ "¸nh x¹ chÝnh x¸c thiÕt bÞ chuét."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "NÕu b¹n muèn truy cËp vµo Internet hay\n"
-#~ "vµo mét m¹ng côc bé, h·y thiÕt lËp tïy chän chÝnh x¸c. BËt thiÕt bÞ lªn\n"
-#~ "tr­íc khi thiÕt lËp ®Ó choDrakX tù ®éng ph¸t hiÖn ra thiÕt bÞ kÕt nèi.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n kh«ng cã bÊt kú mét kÕt nèi Internet hay m¹ng côc bé nµo, chän\n"
-#~ "\"Kh«ng ch¹y tÝnh n¨ng m¹ng\".\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n muèn cÊu h×nh m¹ng sau khi cµi ®Æt hoÆc b¹n ®· cÊu h×nh xong\n"
-#~ "chøc n¨ng kÕt nèi m¹ng, chän \"Hoµn thµnh\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Kh«ng ph¸t hiÖn ®­îc modem. H·y chän cæng nèi tiÕp (serial port) ®­îc nèi "
-#~ "víi modem.\n"
-#~ "\n"
-#~ "\n"
-#~ "VÒ th«ng tin, cæng nèi tiÕp ®Çu tiªn ( \"COM1\" trong Microsoft\n"
-#~ "Windows) cã tªn lµ  \"ttyS0\" trong Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ ®iÒn vµo môc tïy chän dialup. NÕu b¹n kh«ng biÕt hay\n"
-#~ "kh«ng râ th«ng tin kÕt nèi, b¹n cã thÓ hái th«ng tin kÕt nèi cô thÓ tõ\n"
-#~ "nhµ cung cÊp dÞch vô Internet cña b¹n. NÕu b¹n kh«ng ®iÒn th«ng tin vµo\n"
-#~ "« DNS (tªn m¸y chñ), th× th«ng tin nµy tõ nhµ cung cÊp dÞch vô internet "
-#~ "sÏ ®­îc\n"
-#~ "g¸n vµo khi b¹n kÕt nèi."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "NÕu modem cña b¹n n»m ngoµi m¸y, bËt nã lªn ®Ó cho DrakX tù ®éng ph¸t "
-#~ "hiÖn."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "H·y bËt modem lªn vµ chän ®óng nã"
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "NÕu nh­ b¹n kh«ng ch¾c ch¾n c¸c th«ng tin trªn lµ chÝnh x¸c\n"
-#~ "hoÆc b¹n kh«ng biÕt chÝnh x¸c th«ng tin nhËp vµo, th× c¸c th«ng tin nµy\n"
-#~ "cã thÓ lÊy tõ nhµ cung cÊp dÞch vô Internet cña b¹n. NÕu b¹n kh«ng nhËp\n"
-#~ "th«ng tin cho DNS (tªn m¸y chñ) vµo ®©y, th× th«ng tin nµy sÏ ®­îc lÊy\n"
-#~ "tõ nhµ cung cÊp dÞch vô Internet cña b¹n khi kÕt nèi."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ ®iÒn tªn m¸y chñ nÕu cÇn thiÕt. Tr­êng hîp b¹n\n"
-#~ "kh«ng biÕt hoÆc kh«ng biÕt râ néi dung cÇn ®iÒn vµo, th«ng tin kÕt nèi "
-#~ "sÏ\n"
-#~ "®­îc lÊy tõ nhµ cung cÊp dÞch vô Internet cña b¹n."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ "   * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ "     You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ "     ask your network administrator.\n"
-#~ "\n"
-#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ "    \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ cÊu h×nh thiÕt bÞ m¹ng cña b¹n.\n"
-#~ "\n"
-#~ "   * §Þa chØ IP: nÕu b¹n kh«ng biÕt hay kh«ng râ ph¶i nhËp g× vµo, h·y "
-#~ "hái ng­êi qu¶n trÞ m¹ng.\n"
-#~ "     B¹n kh«ng nªn nhËp ®Þa chØ IP nÕu b¹n dïng tïy chän  \"IP tù ®éng\" "
-#~ "bªn d­íi.\n"
-#~ "\n"
-#~ "   * MÆt n¹ m¹ng: \"255.255.255.0\" th­êng lµ sù lùa chän tèt. NÕu b¹n "
-#~ "kh«ng biÕt hay kh«ng râ ph¶i ®iÒn g× vµo,\n"
-#~ "     h·y hái ng­êi qu¶n trÞ m¹ng.\n"
-#~ "\n"
-#~ "   * IP tù ®éng: nÕu m¹ng cña b¹n sö dông giao thøc BOOTP hoÆc DHCP, h·y "
-#~ "dïng tïy chän nµy. Khi ®· chän, kh«ng cÇn ®iÒn gi¸ trÞ nµo vµo\n"
-#~ "    \"§Þa chØ IP\". Tr­êng hîp b¹n kh«ng biÕt hay kh«ng ch¾c ch¾n cã cÇn "
-#~ "dïng tïy chän nµy hay kh«ng, h·y hái ng­êi qu¶n trÞ m¹ng."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ ®iÒn tªn m¸y chñ vµo nÕu thÊy cÇn thiÕt. NÕu b¹n "
-#~ "kh«ng\n"
-#~ "biÕt hay kh«ng ch¾c ch¾n ph¶i ®iÒn g× vµo, h·y hái ng­êi qu¶n trÞ m¹ng."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ ®iÒn tªn m¸y chñ vµo nÕu cÇn. NÕu\n"
-#~ "kh«ng biÕt hay kh«ng ch¾c ch¾n cÇn ®iÒn g× vµo, h·y ®Ó trèng."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ nhËp tïy chän dialup. NÕu b¹n kh«ng râ ph¶i ®iÒn g× "
-#~ "vµo,\n"
-#~ "th«ng tin chÝnh x¸c cã thÓ ®­îc lÊy tõ nhµ cung cÊp dÞch vô Internet cña "
-#~ "b¹n."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "NÕu dïng m¸y chñ ñy nhiÖm, h·y cÊu h×nh b©y giê. NÕu b¹n kh«ng biÕt\n"
-#~ "lµ cã nªn dïng hay kh«ng, h·y hái ng­êi qu¶n trÞ m¹ng hoÆc nhµ cung cÊp "
-#~ "dÞch vô Internet."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "B¹n cã thÓ cµi ®Æt gãi m· ho¸ (cryptographic) khi thiÕt lËp kÕt nèi "
-#~ "internet \n"
-#~ "®· ®óng. §Çu tiªn chän mét mirror mµ b¹n muèn t¶i xuèng c¸c gãi, sau\n"
-#~ "®ã chän c¸c gãi ®Ó cµi ®Æt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Chó thÝch: b¹n ph¶i chän mirror vµ c¸c gãi m· hãa theo \n"
-#~ "luËt ph¸p cña n­íc m×nh."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "B©y giê b¹n chän mói giê theo vïng b¹n ®ang ë "
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "B¹n cã thÓ cÊu h×nh m¸y in côc bé (®­îc nèi víi m¸y cña b¹n) hay m¸y in\n"
-#~ "ë xa (cã thÓ truy cËp qua mét m¹ng Unix, Netware hay Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "NÕu b¹n muèn dïng chøc n¨ng in Ên, h·y chän mét hÖ thèng in gi÷a\n"
-#~ "CUPS vµ LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS lµ mét tiÖn Ých in Ên míi, m¹nh vµ mÒm dÎo cho hÖ thèng Unix (CUPS\n"
-#~ "cã nghÜa lµ \"Common Unix Printing System\"). §©y lµ hÖ thèng in Ên mÆc "
-#~ "®Þnh trong\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR lµ hÖ thèng in Ên cò ®­îc sö dông trong c¸c b¶n ph©n phèi Mandrake "
-#~ "Linux tr­íc ®©y.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n kh«ng cã m¸y in, nhÊp chuét lªn \"Kh«ng cã\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux cã thÓ lµm viÖc víi nhiÒu lo¹i m¸y in. Mçi lo¹i l¹i cã yªu cÇu\n"
-#~ "cµi ®Æt kh¸c nhau.\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu m¸y in ®­îc nèi trùc tiÕp víi m¸y tÝnh, chän \"M¸y in\n"
-#~ "côc bé\".\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n muèn truy cËp tíi m¸y in cña mét m¸y tÝnh Unix ë xa, chän\n"
-#~ "\"M¸y in ë xa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "NÕu b¹n muèn truy cËp m¸y in cña mét m¸y tÝnh Microsoft Windows ë xa\n"
-#~ "(hoÆc m¸y tÝnh Unix sö dông giao thøc SMB), chän \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ "     If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ "     The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ "     other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Location: if you want to put some information on your\n"
-#~ "     printer location, put it here (you are free to write what\n"
-#~ "     you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "H·y bËt m¸y in tr­íc khi tiÕp tôc qu¸ tr×nh ®Ó cho DrakX ph¸t hiÖn ®­îc.\n"
-#~ "\n"
-#~ "B¹n cÇn ®iÒn mét sè th«ng tin vµo ®©y.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Tªn m¸y in: spooler cña m¸y in dïng \"lp\" lµm tªn m¸y in mÆc ®Þnh. "
-#~ "V× vËy, m¸y in ph¶i cã tªn lµ \"lp\".\n"
-#~ "     NÕu b¹n chØ cã mét m¸y in, b¹n cã thÓ dïng vµi tªn cho nã. B¹n rÊt "
-#~ "cÇn t¸ch riªng chóng b»ng ®Æc tÝnh\n"
-#~ "     èng dÉn (pipe) nh­ sau (a \"|\"). Do ®ã, nÕu b¹n thÝch mét c¸i tªn "
-#~ "cã ý nghÜa h¬n, b¹n ph¶i ®iÒn nã vµo phÇn ®Çu cña tªn, VD: \"My printer|lp"
-#~ "\".\n"
-#~ "     M¸y in cã  \"lp\" trong tªn cña nã sÏ lµ m¸y in mÆc ®Þnh.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * M« t¶: ®iÒu nµy mang tÝnh tïy thÝch nh­ng h÷u Ých khi b¹n cã vµi m¸y "
-#~ "in nèi víi m¸y tÝnh cña b¹n hoÆc khi b¹n cho phÐp\n"
-#~ "     c¸c m¸y tÝnh kh¸c truy cËp tíi m¸y in nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * VÞ trÝ: NÕu b¹n muèn ghi chó thªm th«ng tin vÒ vÞ trÝ\n"
-#~ "     ®Æt m¸y in cña b¹n, h·y ®iÒn vµo ®©y (b¹n ®­îc phÐp ghi\n"
-#~ "     g× lµ tïy b¹n, vÝ dô: \"LÇu hai\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ "    If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ "    The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ "     if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ "     If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "B¹n cÇn ®iÒn mét sè th«ng tin vµo ®©y:\n"
-#~ "\n"
-#~ "\n"
-#~ "   * Tªn hµng in: spooler cña m¸y in dïng \"lp\" lµm tªn m¸y in mÆc ®Þnh. "
-#~ "V× vËy, b¹n cÇn cã mét tªn cho m¸y in lµ \"lp\".\n"
-#~ "    NÕu b¹n chØ cã mét m¸y in, b¹n cã thÓ dïng vµi tªn cho nã. B¹n rÊt "
-#~ "cÇn t¸ch riªng chóng b»ng ®Æc tÝnh èng dÉn\n"
-#~ "    (pipe) nh­ sau (a \"|\"). V× thÕ, nÕu b¹n thÝch mét c¸i tªn cã ý "
-#~ "nghÜa h¬n, b¹n ph¶i ®iÒn nã vµo phÇn ®Çu cña tªn, VD: \"My printer|lp\".\n"
-#~ "    M¸y in cã  \"lp\" trong tªn cña nã sÏ lµ m¸y in mÆc ®Þnh.\n"
-#~ "\n"
-#~ "  \n"
-#~ "   * Th­ môc Spool: ®©y lµ th­ môc chøa c¸c c«ng viÖc in Ên. H·y gi÷ tïy "
-#~ "chän mÆc ®Þnh\n"
-#~ "     nÕu b¹n kh«ng biÕt dïng nh­ thÕ nµo.\n"
-#~ "\n"
-#~ "\n"
-#~ "   * KÕt nèi m¸y in: nÕu m¸y in ®­îc nèi trùc tiÕp víi m¸ytÝnh cña b¹n, "
-#~ "h·y chän \"M¸y in côc bé\".\n"
-#~ "     NÕu b¹n muèn truy cËp tíi m¸y in cña m¸y tÝnh Unix ë xa, h·y chän "
-#~ "\"M¸y in lpd ë xa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     NÕu b¹n muèn truy cËp tíi m¸y in cña mét m¸y tÝnh ch¹y Microsoft "
-#~ "Windows (hoÆc cña mét m¸y tÝnh Unix sö dông giao thøc SMB),\n"
-#~ "     h·y chän \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ "     NÕu b¹n muèn truy cËp tíi m¸y in cña m¹ng NetWare, h·y chän \"NetWare"
-#~ "\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Kh«ng ph¸t hiÖn ra m¸y in cña b¹n. H·y ®iÒn tªn thiÕt bÞ mµ\n"
-#~ "m¸y in ®­îc nèi vµo.\n"
-#~ "\n"
-#~ "\n"
-#~ "VÒ th«ng tin, c¸c m¸y in th­êng ®­îc nèi víi cæng song song thø nhÊt. "
-#~ "Cæng\n"
-#~ "nµy cã tªn lµ \"/dev/lp0\" trong GNU/Linux vµ \"LPT1\" trong Microsoft "
-#~ "Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "B©y giê b¹n ph¶i chän m¸y in trong danh s¸ch ë trªn."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "H·y lùa ®óng c¸c tïy chän cho m¸y in cña b¹n.\n"
-#~ "Xem tµi liÖu ®i kÌm víi m¸y in nÕu b¹n kh«ng biÕt cÇn ph¶i chän g×.\n"
-#~ "\n"
-#~ "\n"
-#~ "B¹n cã thÓ ch¹y thö ®Ó kiÓm tra cÊu h×nh ®­îc thiÕt lËp ë b­íc tiÕp theo "
-#~ "vµ còng cã thÓ thay ®æi l¹i nÕu nã ho¹t ®éng kh«ng ch­a tèt."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "B©y giê b¹n ®iÒn mËt khÈu root cho hÖ thèng Mandrake Linux .\n"
-#~ "MËt khÈu ph¶i ®­îc nhËp vµo hai lÇn ®Ó x¸c nhËn lµ mËt khÈu ë c¶ hai lÇn "
-#~ "®Òu nh­ nhau.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root lµ ng­êi qu¶n trÞ hÖ thèng vµ duy nhÊt ®­îc phÐp thay ®æi\n"
-#~ "cÊu h×nh hÖ thèng. V× vËy, h·y thËn träng khi chän mËt khÈu nµy. \n"
-#~ "Sö dông bõa b·i account cña root cã thÓ g©y nguy hiÓm trÇm träng tíi tÝnh "
-#~ "toµn vÑn\n"
-#~ "cña hÖ thèng, d÷ liÖu cña nã còng nh­ tíi c¸c hÖ thèng kh¸c kÕt nèi víi "
-#~ "nã.\n"
-#~ "\n"
-#~ "\n"
-#~ "MËt khÈu nªn gåm c¸c ký tù lµ ch÷ c¸i lÉn sè vµ ph¶i cã\n"
-#~ " ®é dµi Ýt nhÊt 8 ký tù. Kh«ng nªn ghi nã vµo (giÊy).\n"
-#~ "\n"
-#~ "\n"
-#~ "Kh«ng nªn dïng mËt khÈu qu¸ dµi vµ phøc t¹p, ®Ó b¹n cã thÓ dÔ\n"
-#~ "dµng nhí nã."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "NÕu m¹ng lµm viÖc dïng giao thøc LDAP (hay NIS) ®Ó chøng thùc, h·y chän\n"
-#~ "\"LDAP\" (hay \"NIS\") ®Ó chøng thùc. NÕu b¹n kh«ng biÕt, h·y hái ng­êi "
-#~ "qu¶n\n"
-#~ " trÞ m¹ng.\n"
-#~ "\n"
-#~ "NÕu m¸y tÝnh kh«ng kÕt nèi víi mét m¹ng ®­îc qu¶n trÞ nµo, cã lÏ b¹n sÏ\n"
-#~ " chän \"TËp tin côc bé\" ®Ó chøng thùc."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ t¹o mét hay vµi account ng­êi dïng \"th«ng th­êng\",\n"
-#~ "chóng kh«ng cã \"®Æc quyÒn\" nh­ account root. B¹n cã thÓ t¹o mét hay \n"
-#~ "vµi account cho c¸c ng­êi mµ b¹n cho phÐp sö dông m¸y tÝnh\n"
-#~ "cña b¹n. L­u ý lµ mçi mét ng­êi dïng sÏ cã mét tïy thÝch riªng\n"
-#~ "cho m×nh nh­ (m«i tr­êng ®å häa, c¸c thiÕt lËp ch­¬ng tr×nh, v.v...)\n"
-#~ "vµ \"th­ môc Home\" riªng biÖt, lµ n¬i cÊt gi÷ c¸c tïy thÝch\n"
-#~ "nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tr­íc hÕt, h·y t¹o mét account cho b¹n! ThËm chÝ b¹n kh«ng ph¶i lµ ng­êi\n"
-#~ "dïng duy nhÊt, b¹n cã thÓ kh«ng sö dông account root hµng ngµy: do cã\n"
-#~ "nguy c¬ cao vÒ vÊn ®Ò b¶o mËt. DÔ g©y cho hÖ thèng kh«ng sö dông ®­îc "
-#~ "th­êng do lçi gâ bµn phÝm.\n"
-#~ "\n"
-#~ "\n"
-#~ "V× vËy, b¹n nªn ®¨ng nhËp vµo hÖ thèng b»ng account ng­êi dïng.\n"
-#~ "B¹n sÏ t¹o nã ë ®©y, viÖc ®¨ng nhËp b»ng root chØ dµnh cho c¸c môc ®Ých\n"
-#~ "qu¶n trÞ vµ b¶o tr× hÖ thèng."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "T¹o ®Üa khëi ®éng lµ viÖc rÊt nªn thùc hiÖn. Tr­êng hîp kh«ng thÓ\n"
-#~ "khëi ®éng ®­îc m¸y tÝnh th× ®©y lµ c¸ch duy nhÊt cøu ch÷a hÖ thèng mµ\n"
-#~ "kh«ng ph¶i cµi ®Æt l¹i."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ "    * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ "    * <number>:  use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Tïy chän chÝnh cña LILO vµ Grub lµ:\n"
-#~ "  - ThiÕt bÞ khëi ®éng: ®Æt tªn cho thiÕt bÞ (VD: mét ph©n vïng\n"
-#~ "æ cøng) mµ nã chøa sector khëi ®éng. Trõ khi ban biÕt thªm c¸ch\n"
-#~ "kh¸c, h·y chän \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Tr× ho·n tr­íc khi khëi ®éng ¶nh mÆc ®Þnh: chØ ®Þnh sè hµng chôc\n"
-#~ "cña gi©y mµ tr×nh khëi ®éng ph¶i chê tr­íc khi n¹p ¶nh ®Çu tiªn.\n"
-#~ "§iÒu nµy h÷u dông cho c¸c hÖ thèng khëi ®éng tøc th× tõ æ cøng khi\n"
-#~ "nhÊn bµn phÝm. Tr×nh khëi ®éng sÏ kh«ng chê nÕu \"Tr× ho·n\" ®­îc\n"
-#~ "bá qua hoÆc ®­îc ®Æt b»ng 0.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - ChÕ ®é Video: chÕ ®é nµy ®Þnh ra chÕ ®é v¨n b¶n VGA, nªn chän dïng\n"
-#~ "khi khëi ®éng. SÎn cã c¸c gi¸ trÞ sau ®©y: \n"
-#~ "\n"
-#~ "    * B×nh th­êng: lùa tïy chän v¨n b¶n 80x25 b×nh th­êng.\n"
-#~ "\n"
-#~ "    * <sè>:  dïng tïy chän v¨n b¶n thÝch hîp.\n"
-#~ "\n"
-#~ "  - Xãa \"/tmp\" t¹i mçi lÇn khëi ®éng: nÕu b¹n muèn xãa toµn bé c¸c tËp "
-#~ "tin vµ c¸c th­ môc\n"
-#~ "n»m trong \"/tmp\" khi b¹n khëi ®éng hÖ thèng, h·y chän tïy chän nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Lµm râ RAM nÕu cÇn: kh«ng may lµ l¹i kh«ng cã ph­¬ng ph¸p chuÈn mùc "
-#~ "nµo\n"
-#~ "®Ó hái BIOS vÒ sè l­îng RAM hiÖn cã trong m¸y tÝnh. KÕt qu¶ lµ Linux cã "
-#~ "thÓ kh«ng\n"
-#~ "ph¸t hiÖn chÝnh x¸c sè l­îng RAM cña b¹n. Trong tr­êng hîp nµy, b¹n\n"
-#~ "cã thÓ ®Þnh râ sè l­îng RAM t¹i ®©y. H·y l­u ý lµ sai sè tõ 2 ®Õn 4 "
-#~ "MBgi÷a\n"
-#~ "bé nhí ph¸t hiÖn ®­îc vµ bé nhí hiÖn cã trong hÖ thèng lµ b×nh th­êng."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO lµ tr×nh khëi ®éng cho SPARC: nã cã thÓ khëi ®éng cho\n"
-#~ "c¶ GNU/Linux vµ bÊt kú hÖ ®iÒu hµnh nµo cã trong m¸y tÝnh cña b¹n.\n"
-#~ "Th«ng th­êng, c¸c hÖ ®iÒu hµnh kh¸c nµy ®­îc ph¸t hiÖn chÝnh x¸c\n"
-#~ "vµ ®­îc cµi ®Æt. NÕu kh«ng ph¸t hiÖn ®­îc, b¹n cã thÓ thªm môc nhËp\n"
-#~ "b»ng tay ë mµn h×nh nµy. H·y thËn träng chän chÝnh x¸c c¸c th«ng sè.\n"
-#~ "\n"
-#~ "\n"
-#~ "B¹n còng cã thÓ kh«ng muèn ng­êi nµo ®ã truy cËp vµo c¸c hÖ ®iÒu hµnh\n"
-#~ "kh¸c nµy, nÕu vËy th× b¹n cã thÓ xãa c¸c môc nhËp t­¬ng øng. Nh­ng\n"
-#~ "trong tr­êng hîp nµy, b¹n cÇn t¹o mét ®Üa khëi ®éng ®Ó khëi ®éng chóng!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ "  - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Tïy chän chÝnh cña SILO:\n"
-#~ "  - Cµi ®Æt tr×nh khëi ®éng: hiÓn thÞ vÞ trÝ b¹n nuèn ®Æt th«ng tin cÇn\n"
-#~ "thiÕt cho qu¸ tr×nh khëi ®éng cña GNU/Linux. NÕu b¹n biÕt chÝnh x¸c\n"
-#~ "viÖc ®ang lµm, h·y chän \"Sector ®Çu tiªn cña æ ®Üa (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ "  Tr× ho·n tr­íc khi khëi ®éng ¶nh mÆc ®Þnh: chØ ®Þnh sè hµng chôc\n"
-#~ "cña gi©y mµ tr×nh khëi ®éng ph¶i chê tr­íc khi khëi ®éng ¶nh ®Çu tiªn.\n"
-#~ "§iÒu nµy h÷u dông cho c¸c hÖ thèng khëi ®éng tøc th× tõ æ cøng khi\n"
-#~ "nhÊn bµn phÝm. Tr×nh khëi ®éng sÏ kh«ng chê nÕu \"Tr× ho·n\" ®­îc\n"
-#~ "bá qua hoÆc ®­îc ®Æt b»ng 0."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "B©y giê lµ lóc cÊu h×nh hÖ thèng X Window, ®©y lµ h¹t nh©n\n"
-#~ "cña GNU/Linux GUI (giao diÖn ng­êi dïng ®å ho¹). §Ó thùc hiÖn,\n"
-#~ "b¹n ph¶i cÊu h×nh card video vµ mµn h×nh. HÇu hÕt c¸c b­íc ®Òu\n"
-#~ "tù ®éng, cho nªn c«ng viÖc cña b¹n cã thÓ chØ lµ sù thÈm\n"
-#~ "tra phÇn nµo ®· hoµn thµnh vµ chÊp thuËn c¸c thiÕt lËp :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Khi ®· xong phÇn cÊu h×nh, X sÏ ®­îc khëi ®éng (trõ khi b¹n\n"
-#~ "yªu cÇu DrakX kh«ng thùc hiÖn) do vËy b¹n cã thÓ kiÓm tra vµ xem\n"
-#~ "c¸c thiÕt lËp cã phï hîp víi b¹n kh«ng. NÕu kh«ng, b¹n cã thÓ trë l¹i\n"
-#~ "vµ thay ®æi chóng cho tíi khi ®¹t yªu cÇu."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "NÕu cã g× ®ã ch­a ®óng khi cÊu h×nh X, h·y lùa c¸c tïy chän nµy ®Ó\n"
-#~ "cÊu h×nh chÝnh x¸c hÖ thèng X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "NÕu muèn ®¨ng nhËp b»ng chÕ ®é ®å häa, chän \"Cã\". NÕu kh«ng, chän\n"
-#~ "\"Kh«ng\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "B¹n cã thÓ chän mét møc b¶o mËt cho hÖ thèng cña b¹n. H·y tham kh¶o tµi "
-#~ "liÖu ®Ó hoµn thµnh\n"
-#~ "  c¸c th«ng tin. VÒ c¬ b¶n, nÕu b¹n kh«ng biÕt chän g×, h·y gi÷ tïy chän "
-#~ "mÆc ®Þnh.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "M¸y tÝnh cña b¹n sÏ khëi ®éng l¹i.\n"
-#~ "\n"
-#~ "Sau khi khëi ®éng l¹i, hÖ thèng Mandrake Linux míi sÏ tù ®éng n¹p.\n"
-#~ "NÕu b¹n muèn khëi ®éng vµo hÖ ®iÒu hµnh hiÖn cã kh¸c, h·y ®äc thªm\n"
-#~ "phÇn h­íng dÉn."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Czech (Programmers)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakian (Programmers)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Tªn lý lÞch ®Ó t¹o:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Ghi /ect/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Format toµn bé"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Sau khi format mäi ph©n vïng,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "tÊt c¶ d÷ liÖu trªn ®ã sÏ bÞ mÊt"
-
-#~ msgid "Reload"
-#~ msgstr "N¹p l¹i"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "B¹n cã muèn t¹o mét ®Üa mÒm cµi ®Æt tù ®éng cho thø b¶n Linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "CÊu h×nh ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Víi m¸y chñ CUPS ë xa, b¹n kh«ng ph¶i cÊu h×nh bÊt kú\n"
-#~ "m¸y in nµo ë ®©y; c¸c m¸y in sÏ ®­îc tù ®éng ph¸t hiÖn\n"
-#~ "trõ khi b¹n cã mét m¸y chñ ë m¹ng kh¸c; tr­êng hîp nµy,\n"
-#~ "b¹n ph¶i cung cÊp ®Þa chØ IP cña m¸y chñ CUPS \n"
-#~ "vµ sè cæng t­¬ng øng."
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "H·y nhËp tªn m¸y in vµ chó thÝch"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "ThiÕu tªn hµng in ë xa!"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "T¹i ®©y, b¹n cã thÓ chØ ®Þnh bÊt kú mét dßng lÖnh tïy ý, c«ng viÖc nªn "
-#~ "®­îc ®­a vµo èng dÉn (pipe) thay v× ®­îc göi trùc tiÕp tíi m¸y in."
-
-#~ msgid "Command line"
-#~ msgstr "Dßng lÖnh"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "CÇn ph¶i nhËp dßng lÖnh!"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Theo dâi m¹ng"
-
-#~ msgid "Profile "
-#~ msgstr "Lý lÞch "
-
-#~ msgid "Statistics"
-#~ msgstr "Thèng kª"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Tèc ®é göi: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Tèc ®é nhËn: "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Thêi gian kÕt nèi:"
-
-#~ msgid "Logs"
-#~ msgstr "B¶n ghi"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "§ang kÕt nèi víi Internet"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Ng¾t kÕt nèi Internet"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Kh«ng ng¾t ®­îc kÕt nèi Internet."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Ng¾t xong kÕt nèi Internet."
-
-#~ msgid "Connection complete."
-#~ msgstr "Hoµn thµnh kÕt nèi."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "KÕt nèi háng.\n"
-#~ "KiÓm tra l¹i thiÕt lËp trong Trung T©m §iÒu KhiÓn Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "®· göi: "
-
-#~ msgid "received: "
-#~ msgstr "®· nhËn: "
-
-#~ msgid "average"
-#~ msgstr "trung b×nh"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Møc ho¹t ®éng mÆc ®Þnh"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Néi dung tËp tin cÊu h×nh kh«ng thÓ xuÊt ra ®­îc."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Kh«ng nhËn ra tËp tin cÊu h×nh"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid "Disable network"
-#~ msgstr "T¾t m¹ng lµm viÖc"
-
-#~ msgid "Enable network"
-#~ msgstr "BËt m¹ng lµm viÖc"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ kiÓm tra chuét. Dïng c¸c nót vµ l¨n thö ®Ó kiÓm tra\n"
-#~ "xem ®· tèt ch­a. NÕu ch­a, b¹n cã thÓ nhÊp chuét lªn \"Bá qua\" ®Ó chän\n"
-#~ "driver kh¸c."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "KÕt nèi DSL (hoÆc ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "Chän lùa"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "B¹n cã thÓ chØ ®Þnh trùc tiÕp URI truy cËp m¸y in b»ng CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "V©ng, h·y in thö ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "V©ng, h·y in thö PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Khæ giÊy"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Nh¶ trang sau khi in?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "C¸c tïy chän driver m¸y in ®a dông "
-
-#~ msgid "Color depth options"
-#~ msgstr "Tïy chän ®é s©u cña mµu"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "In v¨n b¶n b»ng PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Cè ®Þnh v¨n b¶n bËc thang?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Sè trang cho c¸c trang in ra"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "LÒ Ph¶i/Tr¸i theo gi¸ trÞ (1/72 inch)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "LÒ Trªn/D­íi theo gi¸ trÞ (1/72 inch)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "C¸c tïy chän thªm cho GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "C¸c tïy chän thªm cho v¨n b¶n"
-
-#~ msgid "Reverse page order"
-#~ msgstr "§¶o l¹i thø tù trang"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Chän KÕt Nèi M¸y In ë xa"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Mäi m¸y in ®Òu cÇn cã tªn cho chóng (vÝ dô: lp).\n"
-#~ "C¸c th«ng sè kh¸c nh­ m« t¶ m¸y in hay vÞ trÝ m¸y in cÇn ®­îc\n"
-#~ "®Þnh râ. Tªn nµo nªn dïng cho m¸y in nµy vµ m¸y in nµy\n"
-#~ "®­îc kÕt nèi nh­ thÕ nµo?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Mäi hµng in (n¬i c«ng viÖc in Ên ®­îc göi tíi) cÇn cã\n"
-#~ "mét tªn (th­êng lµ lp) vµ mét th­ môc spool ®i kÌm víi nã.\n"
-#~ "Tªn vµ th­ môc nµo ®­îc sö dông cho hµng in nµy vµ m¸y in ®­îc kÕt nèi "
-#~ "nh­ thÕ nµo?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Tªn hµng in"
-
-#~ msgid "Spool directory"
-#~ msgstr "Th­ môc spool"
-
-#~ msgid "fsck failed: "
-#~ msgstr "fsck háng: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "§Ó hÖ thèng b¶o mËt h¬n, b¹n nªn chän \"Dïng tËp tin shadow\" vµ\n"
-#~ "\"Dïng mËt khÈu MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "NÕu m¹ng cña b¹n sö dông NIS, h·y chän \"Dïng NIS\". NÕu kh«ng biÕt, h·y "
-#~ "hái\n"
-#~ "ng­êi qu¶n trÞ m¹ng."
-
-#~ msgid "yellow pages"
-#~ msgstr "Trang vµng"
-
-#~ msgid "Light configuration"
-#~ msgstr "CÊu h×nh Light"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "B¹n muèn kÕt nèi vµo Internet nh­ thÕ nµo?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "kh«ng thÓ ph©n nh¸nh: "
-
-#~ msgid "Configure..."
-#~ msgstr "CÊu h×nh..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "KÝch th­íc ®­îc chän %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "§ang më kÕt nèi..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Scrip khëi ®éng nµy thö n¹p c¸c module cho chuét USB cña b¹n"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "CÊu h×nh khu«n thøc khëi ®éng"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "B©y giê kÕt nèi Internet ®· ®­îc cÊu h×nh,\n"
-#~ "m¸y tÝnh cña b¹n cã thÓ cÊu h×nh ®Ó chia sÎ kÕt nèi Internet.\n"
-#~ "L­u ý: b¹n cÇn dµnh ra mét adapter m¹ng ®Ó thiÕt lËp mét m¹ng côc bé "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "B¹n cã muèn thiÕt lËp chia sÎ kÕt nèi Internet kh«ng?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Chµo mõng tiÖn Ých Chia SÎ KÕt Nèi Internet!"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Tù ®éng kiÓm tra c¸c phô thuéc"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "CÊu h×nh LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "T¹o ®Üa khëi ®éng"
-
-#~ msgid "Choice"
-#~ msgstr "Lùa chän"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "cùc quang ®Ñp ®­êng ch©n trêi"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "cùc quang däc truyÒn thèng "
-
-#~ msgid "gMonitor"
-#~ msgstr "Mµn h×nh GNOME"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ "  you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ "  information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ "  your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ "  specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ "  present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ "  typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ "  select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ "  should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "B©y giê b¹n cã thÓ lùa mét sè tïy chän thªm cho hÖ thèng cña b¹n.\n"
-#~ "\n"
-#~ "* Tèi ­u hãa æ ®Üa cøng: tïy chän nµy cã thÓ c¶i thiÖn ho¹t ®éng cña æ "
-#~ "®Üa cøng nh­ng chØ dµnh cho ®èi t­îng ng­êi dïng cao cÊp. Mét sè\n"
-#~ "  chipset cã thÓ lµm háng d÷ liÖu cña b¹n, h·y cÈn thËn. L­u ý lµ kernel "
-#~ "®­îc n¹p danh s¸ch c¸c æ ®Üa vµ chipset, nh­ng nÕu b¹n muèn tr¸nh c¸c\n"
-#~ "  r¾c rèi bÊt ngê cã thÓ x¶y ra, ®õng thiÕt lËp tïy chän nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Chän møc b¶o mËt: b¹n cã thÓ chän møc b¶o mËt tõ hÖ thèng. H·y tham "
-#~ "kh¶o tµi liÖu h­íng dÉn ®Ó hoµn thµnh phÇn nµy.\n"
-#~ "  VÒ c¨n b¶n, nÕu b¹n kh«ng biÕt ph¶i chän nh÷ng g×, h·y ®Æt ë møc mÆc "
-#~ "®Þnh.\n"
-#~ "\n"
-#~ "\n"
-#~ "* KiÓm tra RAM nÕu cÇn: kh«ng cã mét ph­¬ng ph¸p chuÈn mùc nµo ®Ó lÊy "
-#~ "th«ng tin tõ BIOS vÒ kÝch th­íc RAM hiÖn cã trong m¸y tÝnh\n"
-#~ "  cña b¹n. V× vËy, Linux cã thÓ ph¸t hiÖn sai kÝch th­íc ®óng cña RAM. "
-#~ "Trong tr­êng hîp nµy, b¹n cã thÓ\n"
-#~ "  ®Þnh râ kÝch th­íc RAM t¹i ®©y. B¹n cÇn biÕt r»ng, chªnh lÖch tõ 2 ®Õn "
-#~ "4 MB gi÷a l­îng RAM ph¸t hiÖn ®­îc vµ l­îng RAM thùc cã\n"
-#~ "  trong hÖ thèng cña b¹n lµ b×nh th­êng.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Tù ®éng g¾n kÕt ph­¬ng tiÖn th¸o l¾p: nÕu b¹n kh«ng thÝch g¾n kÕt b»ng "
-#~ "tay ph­¬ng tiÖn th¸o l¾p (CD-Rom, æ ®Üa mÒm, æ Zip, v.v...) b»ng viÖc\n"
-#~ "  gâ lÖnh \"mount\" vµ \"umount\", h·y sö dông tïy chän nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Xo¸ th­ môc \"/tmp\" mçi khi khëi ®éng: nÕu b¹n muèn xo¸ tÊt c¶ c¸c tËp "
-#~ "tin vµ th­ môc trong \"/tmp\" khi khëi ®éng hÖ thèng,\n"
-#~ "  h·y dïng tïy chän nµy.\n"
-#~ "\n"
-#~ "\n"
-#~ "* KÝch ho¹t Num Lock lóc khëi ®éng: NÕu b¹n muèn phÝm NumLock ho¹t ®éng "
-#~ "sau, khi khëi ®éng, h·y dïng tïy chän nµy. L­u ý lµ b¹n kh«ng nªn\n"
-#~ "  dïng tïy chän nµy cho c¸c m¸y tÝnh x¸ch tay v× phÝm NumLock cã thÓ ho¹t "
-#~ "®éng hoÆc kh«ng ho¹t ®éng trong X."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Linh tinh"
diff --git a/perl-install/share/po/wa.po b/perl-install/share/po/wa.po
deleted file mode 100644
index b32fe471d..000000000
--- a/perl-install/share/po/wa.po
+++ /dev/null
@@ -1,12031 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 1999-2001
-# Lorint Hendschel <LorintHendschel@skynet.be>, 1999-2002
-# Lucyin Mahin <lucyin@iam.net.ma>, 2000,2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-08-25 11:07+0200\n"
-"Last-Translator: Lorint Hendschel <LorintHendschel@skynet.be>\n"
-"Language-Team: walon <linux-wa@chanae.alphanet.ch>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Apontyî totes les waitroûles separemint"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Eployî l' egztension «Xinerama»"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Apontyî rén kel cåte «%s» (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Apontiaedje po-z aveur pus d' ene waitroûle"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Li sistinme da vosse sopoite d' eployî pus d' ene\n"
-"waitroûle e minme tins. Ké voloz-ve fé?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Cåte grafike"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Tchoezixhoz ene cåte grafike"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Tchoezixhoz on sierveu X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Sierveu X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Tchoezixhoz on mineu X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Mineu X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kén apontiaedje di XFree voloz-ve?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vosse cåte pout aveur del acceleråcion 3D seulmint avou XFree %s.\n"
-"Vosse cåte est sopoirtêye pa XFree %s ki pout aveur on meyeu sopoirt pol 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vos ploz eployî l' acceleråcion 3D di vosse cåte videyo avou XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s avou del acceleråcion 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Vos ploz eployî l' acceleråcion 3D di vosse cåte videyo avou XFree86 %s,\n"
-"ASTEME: CI SOPOIRT EST CO ECSPERIMENTÅ ET POUT DJALER VOSSE COPIUTRECE."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s avou del acceleråcion 3D ECSPERIMENTÅLE"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vosse cåte pout aveur del acceleråcion 3D seulmint avou XFree %s.\n"
-"ASTEME: CI SOPOIRT EST CO ECSPERIMENTÅ ET POUT DJALER VOSSE COPIUTRECE.\n"
-"Vosse cåte est sopoirtêye pa XFree %s ki pout aveur on meyeu sopoirt pol 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (mineu di håynaedje pol astalaedje)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Apontiaedje di XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Dijhoz li memwere di vosse cåte grafike"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Tchûzes do sierveu X"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Tchoezixhoz ene waitroûle"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Waitroûle"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Les deus pus consecantès sacwès, c' est (1) li frécwénce di \n"
-"rafristaedje d' astampé (vertical refresh rate) eyet, co pus impôrtant,\n"
-"li frécwénce di rafristaedje di coûtchî (horizontal refresh rate).\n"
-"\n"
-"Ni tchoezixhoz MÅY ene frécwénce pus foite ki çu ki vosse waitroûle "
-"sopoite,\n"
-"sins cwè vos porîz distrure vosse waitroûle."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frécwénce di rafristaedje di coûtchî"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frécwénce di rafristaedje d' astampé"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Waitroûle nén apontieye"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Cåte grafike nén co apontieye"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Fintés nén co tchoezeyes"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Voloz-ve sayî l' apontiaedje?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Loukîz a vos: sayî cisse cåte grafike pout djaler vosse copiutrece"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Saye di l' apontiaedje"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"sayîz di candjî sacwantès tchûzes"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "I gn åk ki n' a nén stî:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Dji va cwiter dvins %d segondes"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "L' apontiaedje est-i totafwait comufåt?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "I gn a åk ki n' a nén stî, sayîz di candjî sacwantès tchûzes"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Finté"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Tchoezixhoz li finté et li parfondeu di coleur"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Cåte grafike: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Sierveu XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Co des ôtes"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "I va"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Môde sipepieus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostrer tot"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Fintés"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sôre del taprece: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Sôre di sori: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Éndjin del sori: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Waitroûle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frécwénce di coûtchî del waitroûle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frécwénce d' astampé del waitroûle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Cåte grafike: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Idéntifiaedje del cåte grafike: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memwere del cåte: %s Ko\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Parfondeu di coleur: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Fintés: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Sierveu XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Mineu di XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Dj' apresteye l' apontiaedje di X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ké voloz-ve fé?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Candjî waitroûle"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Candjî cåte grafike"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Candjî les tchûzes do sierveu"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Candjî finté"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrer informåcion"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Sayî co ene feye"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Cwiter"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Wårder les candjmints?\n"
-"L' apontiaedje do moumint est:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Enonder X a l' enondaedje"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Si vos voloz, voste éndjole pout esse metowe dins li môde grafike (dizo X)\n"
-"do côp k' ele s' enonde.\n"
-"Voloz-ve enonder X cwand vos renondez voste éndjole?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Rintrez di novea dins ene session %s po mete en alaedje les candjmints"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Moussîz foû (logout) et adon siervoz-ve di Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 coleurs (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 meye coleurs (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 meye coleurs (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miyons di coleurs (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miyårds di coleurs (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 Ko"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 Ko"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mo ou di pus"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA Standård, 640x480 e 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 e 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Copatibe 8514, 1024x768 e 87 Hz eterlacé (nén 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 e 87 Hz eterlacé, 800x600 e 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA Sitindou, 800x600 e 60 Hz, 640x480 e 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Nén-Eterlacé, 1024x768 e 60 Hz, 800x600 e 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA Hôte Frécwénce, 1024x768 e 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frécwénce ki pout fé do 1280x1024 e 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frécwénce ki pout fé do 1280x1024 e 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frécwénce ki pout fé do 1280x1024 e 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Waitroûle ki pout fé do 1600x1200 e 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Waitroûle ki pout fé do 1600x1200 e 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prumî secteu del pårticion d' enondaedje"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prumî secteu del plake (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Astalåcion di SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Wice ki vos voloz astaler l' enondrece?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Astalåcion di LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO avou on menu e môde tecse"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO avou on menu grafike"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Enonder a pårti di DOS/Windows (avou loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Mwaissès tchûzes di l' enondrece"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Enondrece a-z eployî"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Astalaedje di l' enondrece"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Éndjin d' enondaedje"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ni va nén avou des vîs BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compak"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compak"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Môde videyo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Tins divant d' enonder li prémetowe imådje"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Mot di passe"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Mot di passe (co ene feye)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Rastrinde les tchûzes del roye di cmande"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "rastrinde"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Netyî /tmp a tchaeke renondaedje"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Grandeu del RAM, s' i fåt (dj' a trové %d Mo)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Mete multi profils"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Dinez li grandeu del RAM e Mo"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Li tchûze «Rastrinde les tchûzes del roye di cmande» ni sieve a rén\n"
-"sins mot di passe"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Sayîz co ene feye"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Les mots di passe sont nén les minmes"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Messaedje d' enondaedje"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Tårdjaedje di l' Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tårdjaedje po l' enondaedje do nawea"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Mete en alaedje l' enondaedje pa plake lazer?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Mete en alaedje l' enondaedje pa l' Open Firmware?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Prémetou sistinme d' operance?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Vos avoz tchoezi d' astaler l' enondrece so ene pårticion.\n"
-"Çoula vout dire ki vos avoz ddja ene enondrece sol secteu d' enondaedje del "
-"deure plake (eg: System Commander).\n"
-"\n"
-"So kéne deure plake ki l' copiutrece s' enonde?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Vochal les intrêyes.\n"
-"Vos ndè poloz radjouter ou co candjî les cenes k' î sont ddja."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Radjouter"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fini"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Candjî"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kéne sôre d' intrêye voloz-ve radjouter?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ôtes sistinmes d' operance (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ôtes sistinmes d' operance (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ôtes sistinmes d' operance (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imådje"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Raecene"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Bouter å coron"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lére-sicrire"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tåvlea"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nén seur"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etikete"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Prémetou"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Grandeu-Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoleVidéyo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Bodjî intrêye foû"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Vos n' poloz avu ene vûde etikete"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Vos dvoz specifyî ene imådje di nawea"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Vos dvoz dner ene pårticion raecene"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Cisse etikete la est ddja eployeye"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Dj' a trové %s eterfaces %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Avoz-ve ene ôte?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Avoz-ve des eterfaces %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Neni"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Oyi"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Voeyîz les informåcions sol éndjolreye"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Astalant mineu po %s cåte %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kéne %s mineuse doe-dje sayî?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"A feyes, li mineuse %s a dandjî d' ene miete di pus d' informåcions po-z\n"
-"aler comufåt, ca bén k' ele va bén sins, normålmint. Voloz-ve diner des\n"
-"informåcions asteure ou leyî li mineuse cachî leye-minme dins voste éndjole\n"
-"après les informåcions k' ele a dandjî? Pa côps, çoula pout fé aroker li\n"
-"copiutrece. Mins ça n' såreut fé nou må."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Saye otomatike"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Dijhoz les tchûzes"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Vos ploz asteure diner les tchûzes pol module %s.\n"
-"Notez ki tote adresse doet esse dinêye e hecsa avou l' betchete 0x, eg: "
-"«0x123»"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Asteure, vos poloz dner les tchûzes pol module %s.\n"
-"Les tchûzes si scrijhèt: « no=valixhance no2=valixhance2... »\n"
-"Metans: « io=0x300 irq=7... »"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Tchûzes do module:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"I gn a åk ki n' a nén stî tot tcherdjant li module %s.\n"
-"Voloz-ve sayî co on côp avou des ôtes parametes?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "accès ås programes grafikes"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "accès ås usteyes rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "permete d' eployî «su»"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "accès ås fitchîs anministratifs"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s a stî ddja radjouté)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ci mot di passe chal est pår trop simpe"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Dinez on no d' ûzeu, s' i vs plait"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Li no d' ûzeu ni pout aveur ki des ptitès letes, des limerôs, «-» ou «_»"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ci no d' ûzeu a ddja stî radjouté"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Radjouter ûzeu"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Intrez on ûzeu\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accepter l' ûzeu"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Vré no"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "No di l' ûzeu"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Imådjete"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Login otomatike"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Si vos voloz, voste éndjole pout esse apontieye po fé on login\n"
-"otomatike avou in ûzeu do côp k' ele s' enonde.\n"
-"Si vos n' voloz nén çoula, clitchîz sol boton «Neni»."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Tchoezixhoz li prémetou ûzeu:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Tchoezixhoz li manaedjeu di purnea a enonder:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Tchoezixhoz li lingaedje a eployî."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vos poloz tchoezi des ôtes lingaedjes ki sront disponibes dispôy\n"
-"l' astalåcion po les ûzeus s' endè siervi."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tos"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Permete tos les ûzeus"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "A vosse môde"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nou pårtaedje"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "I gn a mezåjhe d' astaler li pacaedje «%s». El voloz astaler?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Vos ploz fé on pårtaedje avou NFS ou Samba. Li kék voloz vs?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "I manke li pacaedje obligatwere %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Rinoncî"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Enonder userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Li pårtaedje pa ûzeu eploye li groupe «fileshare».\n"
-"Vos ploz radjouter on ûzeu dins ç' groupe la avou userdrake."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Ouxh å lådje po les hacneus"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pôve"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Tipike"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hôte"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Co pus hôte"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Couyon"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ci livea chal doet esse eployî avou sogne. Avou lî vosse sistinme srè pus\n"
-"åjhey a eployî, mins avou moens di såvrité: i n' fåt nén l' eployî po ene\n"
-"éndjole raloyeye a ene rantoele. I gn a pont di mot di passe po-z intrer."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Avou ci livea chal i gn a des mots di passe, mins c' est tolminme on livea\n"
-"di såvrité trop bas ki po l' eployî avou ene copiutrece raloyeye a ene "
-"rantoele."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Çouchal c' est l' livea di såvrité standård po ene copiutrece ki va esse "
-"eployeye po si raloyî al rantoele daegnrece come client."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"I gn a ddja des rastrindaedjes, et d' ôtes verificåcions otomatikes del "
-"såvrité sont-st fwaits par nute."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Avou ci livea chal, vos poloz eployî li sistinme come on sierveu.\n"
-"Li såvrité est hôte assez ki po-z eployî li sistinme come on sierveu ki "
-"acceptrè des raloyaedjes di bråmint des clients. Note: si voste éndjole est "
-"seulmint on client sol daegntoele vos dvrîz tchoezi on livea pus bas."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Les minmes sacwès ki pol livea di dvant, mins asteure li sistinme est seré "
-"totafwait.\n"
-"Li såvrité est å pus grand."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Tchoezixhoz on livea di såvrité"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Livea di såvrité"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Eployî libsafe po les sierveus"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Ene lîvreye po disfinde l' éndjole siconte les atake di «buffer overflow» "
-"eyet les atakes so les formataedjes des tchinnes."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Wilicome a %s li tchoezixheu do sistinme d' operance a enonder!\n"
-"\n"
-"Tchoezixhoz li sistinme d' operance el djiveye\n"
-"ou taordjiz %d segondes po l' enondaedje premetou.\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Wilicome a GRUB li tchoezixheu do sistinme d' operance a enonder!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Eployiz les tapes %c et %c po mete les intreyes e sorbriyance."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tapez so Enter po-z enonder li S.O. tchoezi, so 'e' po-z aspougni"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"les comandes avant d' enonder, ou so 'c' po-z aveur ene roye di comande."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "L' intreye e sorbriyance va esse enondeye otomaticmint dins %d s."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "i gn a nén del plaece assez so /boot"
-
-# I gn a pont di modeye di Microsoft-Windows e walon, adon les nos des
-# ridants sront pår e francès...
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Bureau"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu Démarrer"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Vos n' poloz nén astaler l' enondrece so ene pårticion %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "L' aidance n' a nén co stî eplimintêye.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Apontiaedje del sôre d' enondaedje"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fitchî"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fitchî/Moussî _foû"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Categorijhaedje novea stîle do corwaitoe"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Corwaitoe novea stîle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Corwaiteu stîle tradicionel"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Corwaiteu stîle tradicionel e Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Enonder Aurora a l' enondaedje del éndjole"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Môde di lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Môde di yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Vos eployîz ddja %s come enondrece po tchoezi\n"
-"li do sistinme d' operance a enonder.\n"
-"Clitchîz so «Apontyî» po-z enonder li macrea d' apontiaedje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Apontyî"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Môde do sistinme"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Enonder li sistinme X-Windows a l' enonda di l' éndjole"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Neni, dji n' vout nén d' otologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Oyi, dji vout eployî l' otologin po ci (ûzeu, scribanne) chal"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "I Va"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "dji n' sai drovi /etc/inittab pol lere: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Go"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Ko"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mo"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "To"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d munutes"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 munute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segondes"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Dji n' pou nén fé des waitroûlêyes divant l' pårtixhaedje"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Les waitroûlêyes seront metowes el ridant %s après l' astalaedje"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "France"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Beljike"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tchekeye"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Almagne"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grece"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvedje"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suwede"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Olande"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Itåleye"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Ôtriche"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Etats Unis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Fijhoz ene copeye di såvrité divant di tcheryî pus lon."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lijhoz avou atincion!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si vos contez eployî aboot, loukîz di leyî on pô del plaece (avou 2048 \n"
-"secteus, vos froz bén) å cminçmint del plake"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Aroke"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Macrea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Accions"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vos avoz ene grande pårticion FAT.\n"
-"(normålmint eployeye pa DOS/Windows di Microsoft).\n"
-"Dji vos propôze, d' apreume, di l' raptixhî\n"
-"(clitchîz sol pårticion, et pôy so «Candjî di grandeu»)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Clitchîz so ene pårticion s' i vs plait"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Po ndè savu d' pus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "FS djournalijhî"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vûde"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ôte"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Sôre do sistinme di fitchîs:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Askepyî"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Sôre"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Eployî «%s» al plaece"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Disfacer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Eployî «Dismonter» al plaece"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Totes les dnêyes sol pårticion %s vont esse pierdowes dispôy candjî si sôre."
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Tchoezixhoz ene pårticion"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Tchoezixhoz ene ôte pårticion"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Moussî foû"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Candjî pol môde sipepieus"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Candjî pol môde normå"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Disfé"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Voloz-ve vormint continuwer?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Cwiter sins schaper"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Moussî foû sins scrire li tåvlea des pårticions?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voloz-ve wårder les candjmints di /etc/fstab ?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Grandeu otomatike"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Tot netyî"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informåcion sol deure plake"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Totes les pårticions sont ocupêyes"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Dji n' pou nén radjouter ene pårticion"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Po-z aveur pus d' pårticions, vos dvoz disfacer ene, po poleur askepyî ene "
-"stindowe pårticion"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Schaper li tåve di pårtixhaedje"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Rimete li tåve di pårtixhaedje come divant"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Rapexhî li tåve di pårtixhaedje"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ritcherdjî li tåve di pårtixhaedje"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Montaedje otomatike des sopoirts bodjåves"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Tchoezi fitchî"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Li copeye di såvrité del tåve di pårtixhaedje n' a nén li minme grandeu.\n"
-"Doe-dje continuwer tot l' minme?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Adviertixhmint"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Metoz ene plakete dvins li lijheu\n"
-"Totes les dnêyes sol plakete vont esse pierdowes"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Dji saye di rapexhî li tåve di pårtixhaedje"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Sipepieuse informåcion"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Pont di montaedje"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Tchûzes"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Candjî di grandeu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Bodjî"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Abwesner"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Radjouter å RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Radjouter å LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Dismonter"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Bodjî foû do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Bodjî foû do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Candjî l' RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Eployî po loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Fé ene novele pårticion"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Secteu di cminçmint: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grandeu e Mo:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Sôre do sistinme di fitchîs: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Pont di montaedje: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferince: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Bodjî li fitchî loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Candjî li sôre del pårticion"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Ké sistinme di fitchîs voloz-ve?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Discandjî di ext2 a ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Wice voloz-ve monter l' fitchî di loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wice voloz-ve monter l' éndjin %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Dji n' såreu dismete li pont di montaedje, ca cisse pårticion est eployeye "
-"pol loopback.\n"
-"Vos dvoz waester li loopback po cmincî."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Dji carcule les limites do sistinme di fitchîs FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Dji candje li grandeu"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Cisse pårticion ni pout nén candjî si grandeu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Totes les dnêyes so cisse pårticion chal dvèt esse schapêyes"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Totes les dnêyes sol pårticion %s vont esse pierdowes dispôy raptixhaedje"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Tchoezixhoz li novele grandeu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Novele grandeu e Mo: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Kéne deure plake voloz-ve bodjî?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Secteu"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Å ké secteu voloz-ve aler?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Bodjant"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Bodjant li pårticion..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Tchoezi on RAID ki egzisteye ddja po î radjouter"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novea"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Tchoezi on LVM ki egzisteye ddja po î radjouter"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "No do LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Cisse pårticion ni pout nén esse eployeye pol loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "No do fitchî loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dinez on no d' fitchî"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Ci fitchî chal est ddja eployî d' in ôte loopback. Purdoz e in ôte"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Li fitchî egzisteye ddja. Voloz-ve l' eployî ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Tchûzes pol montaedje"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Totès sôres"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "éndjin"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "livea"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "grandeu des bokets"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Prindoz asteme: cisse operåcion chal est dandjureuse."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kéne sôre di pårtixhaedje?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Dji rgrete, mins dji n' pou nén fé /boot si lon sol plake (so on cilinde > "
-"1024).\n"
-"Seuye-t i vos eployîz LILO eyet ça n' rotrè nén, seuye-t i vos n' eployîz "
-"nén\n"
-"LILO et vos n' avoz nén dandjî di /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Li pårticion ki vos avoz tchoezi pol ridant raecene (/) est fizicmint\n"
-"hute do 1024e cilinde del deure plake, eyet vos n' avoz nole pårticion\n"
-"/boot. Si vos vs contez siervi do manaedjeu d' enondaedje lomé LILO, loukîz\n"
-"a vos: vos dvoz radjouter ene pårticion /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Vos avoz tchoezi ene pårticion RAID e cotûzreye pol pårticion raecene (/).\n"
-"Nole enondrece pout manaedjî çoula sins ene pårticion /boot.\n"
-"Adon pinsez a radjouter ene pårticion /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Li tåve di pårtixhaedje del plake %s va esse scrite sol plake!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Vos dvoz renonder voste éndjole po les candjmints esse metous en alaedje"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Totes les dnêyes sol pårticion %s vont esse pierdowes dispôy abwesnaedje"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Abwesnant"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Abwesnant li fitchî loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Abwesnant li pårticion %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Catchî les fitchîs"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Bodjî les fitchîs viè l' novele pårticion"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Li ridant %s a ddja sacwantès dnêyes\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Dji bodje les fitchîs viè l' novele pårticion"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copiant %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Dji bodje %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "li pårticion %s est asteure kinoxhowe come %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Éndjin: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lete del plake DOS: %s (dji saye d' adviner)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Sôre: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "No: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Enondaedje: secteu %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeu: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s secteus"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Do cilinde %d å cilinde %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Abwesneye\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nén abwesneye\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montêye\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Fitchî(s) loopback:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Pårticion prémetowe po-z enonder l' éndjole\n"
-"    (po l' enondaedje di MS-DOS, nén po LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Livea %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Grandeu des bokets %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Plakes-RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "No do fitchî loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"I gn a des tchances po ki cisse\n"
-"pårticion chal seuye ene pårticion\n"
-"k' i gn a des mineus dvins, vos\n"
-"dvrîz motoit l' leyî.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Cisse sipeciåle pårticion\n"
-"d' enondaedje chal c' est po\n"
-"vos poleur tchoezi l' sistinme\n"
-"d' operance a-z enonder cwand\n"
-"vos enondez li copiutrece.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeu: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Djeometreye: %s cilindes, %s tiesses, %s secteus\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informåcion: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Plakes-LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Sôre di tåvlea di pårtixhaedje: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "sol bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Tchûzes: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Clé d' ecriptaedje do sistinme di fitchîs"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Tchoezixhoz vosse clé d' ecriptaedje pol sistinme di fitchîsé"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Cisse clé d' ecriptaedje est trop simpe (ele doet esse d' å moens %d letes)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Les clés d' ecriptaedje ni sont nén les minmes"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Clé d' ecriptaedje"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Clé d' ecriptaedje (co ene feye)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Candjî l' sôre"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Clitchîz so on sopoirt s' i vs plait"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Dji cwir les sierveus"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s l' abwesnaedje di %s a fwait berwete"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Dji n' sai cmint abwesner %s e sôre %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "li montaedje del pårticion %s el ridant %s a fwait berwete"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "li fsck a fwait berwete et rexhou avou on côde %d ou signå %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "aroke tot montant %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpe"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "avou /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "sierveu"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vos n' poloz eployî JFS po des pårticions di moens di 32Mo"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vos n' poloz eployî ReiserFS po des pårticions di moens di 32Mo"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Les ponts di montaedje dvèt comincî avou on '/'"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "I gn a ddja ene pårticion avou li pont di montaedje %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Vos n' poloz nén on volume lodjike LVM pol pont di montaedje %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ci ridant chal doet esse el mwaisse sistinme di fitchîs"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"I vos fåt on vré sistinme di fitchîs (ext2, reiserfs) po ci pont di "
-"montaedje chal\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Vos n' poloz eployî on sistinme di fitchîs ecripté pol pont di montaedje %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nén del plaece libe assez po l' atribuwaedje otomatike"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Rén a fé"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ene sacwè n' a nén stî come dji droveu %s po î scrire: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ene sacwè n' a nén stî: dji n' a trové nou valåbe éndjin po fé des noveas "
-"sistinmes di fitchîs. Loukîz vos éndjolreyes po savu çu ki n' va nén"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Vos n' avoz nole pårticion!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux est on sistinme multi-ûzeus, dj' ô bén, tchaeke ûzeu pout aveur\n"
-"on evironmint, des preferinces eyet des fitchîs da lu. Vos ploz lere li\n"
-"«Guide di l' Ûzeu» po ndè savu pus long. Mins, å contråve di «root»,\n"
-"k' est l' administråteu, les ûzeus ki vos alez radjouter chal n' åront\n"
-"nén l' droet di candjî ene sacwè so l' éndjole apu k' les fitchîs eyet\n"
-"apontiaedjes da zels. Vos dvroz fé pol moens on ûzeu normå po vos minme.\n"
-"Ci conte ûzeu la c' est po moussî el copiutrece po l' eployaedje di tos\n"
-"les djoûs. Minme si çoula sonle ahessåve di moussî tofer come «root»,\n"
-"c' est ossu ene sacwè di foirt dandjureu! Li pus ptite måcule pout\n"
-"signifyî kel sistinme da vosse ni rotrè gote pus. Si vos fjhoz ene\n"
-"consecante aroke come on ûzeu normå, li pé ki vs pout ariver c' est di\n"
-"piede sacwants fitchîs et informåcions, mins nén li sistinme en etir.\n"
-"\n"
-"D' apreume, vos dvoz dner vosse no. C' est nén obligatwere, bén seur - et\n"
-"vos ploz bén î mete çu k' vos vloz. DrakX irè adon prinde li prumî mot ki\n"
-"vos avoz tapé eyet l' passer el tchamp «No di l' ûzeu». Ci no la c' est\n"
-"l' no ki l' éndjole vos cnoxhe; çu ki vos dvoz taper el purnea di bénvnowe\n"
-"po moussî el copiutrece. Vos l' poloz candjî. Vos ploz mete çu k' vos vloz\n"
-"mins di moens di ût letes; et rén ki des ptitès letes, sins accints ou des\n"
-"chifes, li loyeure («-») ou li sene sorlignî («_»).\n"
-"Après çoula, vos dvoz taper vosse sicret. Li scret d' on ûzeu normå, sins\n"
-"priviledjes sipeciås n' est nén ossu impôrtant kel ci da «root», do pont\n"
-"d' vuwe del såvrité, mins c' est tolminme nén ene råjhon po n' nén\n"
-"fé atincion ås screts des ûzeus - c' est vos fitchîs ki sont-st e risse.\n"
-"\n"
-"Si vos clitchîz so «Accepter l' ûzeu» l' ûzeu srè radjouté po d' bon avou\n"
-"les informåcions ki vs avoz dné, et les tchamps sront vûdîs po vos pleur\n"
-"e radjouter on ôte. Vos e ploz radjouter ostant ki vos vloz: onk po tchaeke\n"
-"di vos soçons, po vosse pére, vosse sour, par egzimpe. Cwand vos avoz fini\n"
-"d' endè radjouter, clitchîz so «Fini».\n"
-"\n"
-"Si vos clitchîz sol boton «Sipepieus» vos ploz candjî li shell eployî pa\n"
-"cist ûzeu la (li prémetou shell est li «bash»)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Chal pa dzeur i gn a ene djîvêye des pårticions Linux k' i gn a so vosse\n"
-"deure plake et ki on stî detectêyes. Vos ploz wårder les tchûzes fwaites\n"
-"pa l' macrea, ele sont comufåt po les cas les pus comons.\n"
-"Si vos les voloz candjî vos dvoz fé å moens ene pårticion raecene («/»).\n"
-"Ni prindoz nén ene trop ptite grandeu ôtrumint vos n' pôrîz astaler "
-"åjheymint\n"
-"des programes, fåte di plaece. Si vos vloz mete vos dnêyes so ene pårticion\n"
-"diferinne, vos dvroz ossu fé ene po «/home» (çu ki vos poroz fé seulmint si\n"
-"vos avoz pus d' ene pårticion del sôre Linux).\n"
-"\n"
-"Pol informåcion, tchaeke pårticion est mostrêye come çoula: «no», "
-"«grandeu».\n"
-"\n"
-"Li «no» est costrut come çouchal: «sôre del deure plake» + «limerô del deure "
-"plake» +\n"
-"«limerô del pårticion» (par egzimpe, hd+a+1 --> «hda1»)\n"
-"\n"
-"Li «sôre del deure plake» est «hd» si vosse deure plake est del sôre IDE,\n"
-"oudobén «sd» si elle est del sôre SCSI.\n"
-"\n"
-"Li «limerô del deure plake» est todi ene lete pa drî «hd» ou «sd».\n"
-"Avou les plakes IDE on a:\n"
-"\n"
-"   * «a» pol plake mwaisse sol prumî controleu IDE,\n"
-"\n"
-"   * «b» pol plake esclave sol prumî controleu IDE,\n"
-"\n"
-"   * «c» pol plake mwaisse sol deuzinme controleu IDE,\n"
-"\n"
-"   * «d» pol plake esclave sol deuzinme controleu IDE.\n"
-"\n"
-"\n"
-"Avou les plakes SCSI, «a» vout dire «prumire deure plake», «b» vout dire "
-"«deuzinme deure plake», evnd..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"L' astalaedje del distribucion Mandrake Linux a si télmint di pacaedjes\n"
-"k' il a bén falou les mete so sacwantes plakes lazer. DrakX sait si on\n"
-"pacaedje k' a stî tchoezi est so ene ôte plake lazer, et i drovrè\n"
-"l' lijheu di plakes lazer po vos l' candjî et mete li çu k' i fåt."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Asteure c' est l' moumint di specifyî kés programes ki vos vloz astaler\n"
-"so voste éndjole. I gn a des meyes et des meyes di pacaedjes pol Mandrake\n"
-"Linux, eyet vos n' estoz nén supozé les cnoxhe tos.\n"
-"\n"
-"Si vos fjhoz on astalaedje sitandård a pårti d' ene plake lazer, i vos srè\n"
-"dmandé d' apreume di dire les CDs ki vos avoz (e môde sipepieus seulmint).\n"
-"Loukîz les etiketes k' i gn a so les plakes lazer et noerixhoz les boesses\n"
-"ki corespondèt ås cis k' vos avoz. Clitchîz so «I va» cwand vos estoz\n"
-"presse a continouwer.\n"
-"\n"
-"Les pacaedjes sont metous dins des groupes corespondant a des ûzaedjes\n"
-"ki porént esse fwaits. Les groupes zels minmes sont metous dins cwate\n"
-"grandès seccions:\n"
-"\n"
-" * «Posse éndjolrece»: si vos tûzez a-z eployî voste éndjole come on posse\n"
-"éndjolrece (dj' ô bén: on ûzaedje personel, å contråve d' on ûzaedje\n"
-"come sierveu metans), adon tchoezixhoz onk ou pluzieurs des groupes\n"
-"corespondants.\n"
-"\n"
-" * «Programaedje»: si l' éndjole va-z esse eployeye po programer,\n"
-"tchoezixhoz li/les groupe(s) ki vos vloz chal.\n"
-"\n"
-" * «Sierveu»: al fén, si l' såme di l' éndjole c' est d' esse on sierveu,\n"
-"vos poroz les kés siervices vos vloz voer astalés so l' éndjole.\n"
-"\n"
-" * «Evironmint grafike»: chal c' est wice ki vos alez tchoezi vosse\n"
-"evironmint grafike favori. I fåt ndè tchoezi pol moens onk si vos vloz\n"
-"on posse éndjolrece avou ene eterface grafike!\n"
-"\n"
-"Cwand vos alez avou l' sori å dzeu do no d' on groupe, ene racsegne srè\n"
-"håynêye avou on court discrijhaedje di çu a cwè i pout siervi.\n"
-"Si vos n' tchoezixhoz nou groupe po l' astalaedje (et k' c' est nén on\n"
-"metaedje a djoû), on purnea vos dmandrè li sôre del astalåcion minimom ki\n"
-"vos vloz. Çoula pout esse:\n"
-" * «Avou X11» astale li moens possibe di pacaedjes po tot l' minme aveur\n"
-"l' eterface grafike X11 en alaedje;\n"
-"\n"
-" * «Avou li documintåcion di båze» astale li sistinme di båze eyet sacantes\n"
-"usteyes avou leu documintåcion. C' est l' astalåcion a l' idêye po on\n"
-"sierveu.\n"
-"\n"
-" * «Astalåcion vormint minimom» n' astalrè ki vormint li minimom po ki\n"
-"l' éndjole s' enonde eyet aveur on sistin Linux en alaedje; rén k' e\n"
-"roye di comande. Ciste astalåcion chal a mezåjhe di 65 Mo seulmint.\n"
-"\n"
-"Vos ploz clitchî sol tchûze «Tchoezi tchaeke pacaedje separemint». C' est\n"
-"ahessåve si vos cnoxhoz on pô les pacaedjes k' i gn a et çu ki vos vloz;\n"
-"oudobén si vos vloz on contrôle totå so çu ki srè astalé ou nén.\n"
-"\n"
-"Si vos cmincîz l' astalaedje e môde «Metaedje a djoû», vos ploz disclitchî\n"
-"tos les groupes po nén aveur des noveas pacaedjes d' astalés, seulmint les\n"
-"cis k' vos avîz ddja davance sront astalés. Çouchal est ahessåve po\n"
-"reparer ou mete a djoû on sistinme k' est ddja sol deure plake."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finålmint, sorlon vosse tchûze di tchoezi ou nén les pacaedjes onk après\n"
-"l' ôte, vos voeroz on åbe avou tos les pacaedjes metous dins des groupes\n"
-"et des sorgroupes. Tot naiviant dins l' åbe vos ploz tchoezi des groupes\n"
-"ou des sorgroupes etirs, ou des pacaedjes tot seus.\n"
-"\n"
-"Tchaeke côp ki vos tchoezixhoz on pacaedje dins l' åbe, si discrijhaedje\n"
-"est mostré sol droete. Cwand vosse relijha est fini, clitchîz sol boton\n"
-"«Astalaedje» k' enondrè adon li porcessus d' astalaedje. Sorlon li\n"
-"raddisté di voste éndjole, eyet li nombe di pacaedjes a-z astaler, çoula\n"
-"prindrè ene houbonde pol porcessus completer. Li tins estimé k' ça prindré\n"
-"est mostré sol waitroûle, po vs aidî a vey s' i gn a l' tins por vos\n"
-"d' aler boere ene jate di cafè.\n"
-"\n"
-"!! Si on pacaedje di sierveu a stî tchoezi, seuye-t i en esprès, ou k' i\n"
-"fwait pårteye d' on groupe, on vos dmandrè d' acertiner ki vos vloz\n"
-"vormint aastaler ces sierveus la. Avou Mandrake Linux tot l' minme ké\n"
-"sierveu k' a stî astalé est, avou les prémetowès tchûzes, metou en\n"
-"alaedje tins di l' enondaedje di l' éndjole. Minme s' i sont seurs\n"
-"et k' i gn a nou cnoxhou problinme å moumint ki l' distribucion a stî\n"
-"fwaite, i s' pout k' des trôs di såvrité seuyexhe discovrous après ki\n"
-"cisse modêye chal di Mandrake Linux fuxhe fineye. Si vos n' savoz nén çou\n"
-"k' on siervice dné est supozé di fé, ou pocwè k' il est astalé, adon\n"
-"clitchîz so «Neni». Si vos clitchîz so «Oyi» les siervices mostrés sront\n"
-"astalés eyet enondés otomaticmint (a moens ki vos candjîz l' aprémetou\n"
-"apontiaedje). !!\n"
-"\n"
-"Li tchûze «Aloyances otomatikes» simplumint fwait ki l' purnea \n"
-"d' adviertixhmint cwand on pacaedje est tchoezi otomaticmint n' est\n"
-"nén håyné. Les pacaedjes tchoezi otomaticmint c' est pask' i gn a des\n"
-"pacaedjes tchoezis k' ont des aloyances avou des ôtes pacaedjes, et \n"
-"k' i les fåt astaler avou po-z aveur l' astalåcion fwaite a môde\n"
-"di djin.\n"
-"\n"
-"Li ptite imådje d' ene plakete al valêye del djîvêye vos permete di\n"
-"tcherdjî ene djîvêye di pacaedjes tchoezis k' åreut stî fwaite å moumint\n"
-"d' in ôte astalaedje. Si vos clitchîz so ciste imådjete chal, i vos srè\n"
-"dmandé di mete li plakete fwaite al fén di l' astalaedje di dvant.\n"
-"Loukîz l' aidance do deuzinme pont del dierinne étape po saveur kimint\n"
-"fé ene sifwaite plakete."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Asteure vos ploz apontyî li raloyaedje åzès rantoeles. Si vos vloz raloyî\n"
-"li copiutrece da vosse al daegntoele oudobén a ene rantoele locåle,\n"
-"tchoezixhoz li boune tchûze s' i vs plait. Verifyîz ki l' éndjin pol\n"
-"raloyaedje est en alaedje divant di clitchî sol tchûze po DrakX poleur\n"
-"detecter otomaticmint l' éndjolreye.\n"
-"Mandrake Linux vos propoze l' apontiaedje d' on raloyaedje al daegntoele\n"
-"tins di l' astalåcion. Les sôres di raloyaedjes k' i gn a sont: pa modem,\n"
-"cåte RDIS (ISDN), raloyaedje ADSL, modem cåbe, et po fini on simpe\n"
-"raloyaedje al rantoele locåle (avou ene cåte rantoele).\n"
-"\n"
-"Chal on n' denrè nén les detays po tchaeskene di ces tchûzes. Verifyîz\n"
-"seulmint ki vs avoz bén tos les parametes et racsegnmints di voste ahesseu\n"
-"al daegntoele, ou di vosse administrateu sistinme.\n"
-"\n"
-"Vos ploz loukî li tchaptrea do manuel so les raloyaedjes al daegntoele po\n"
-"pus di detays so l' apontiaedje, ou simplumint ratinde kel sistinme da\n"
-"vosse seuye astalé eyet eployî li programe k' î est discrit po-z\n"
-"apontyî vosse raloyaedje.\n"
-"\n"
-"Si vos vloz apontyî li rantoele pus tård, après l' astalåcion, ou si vos\n"
-"avos fini d' apontyî vosse raloyaedje al rantoele, clitchîz so «Rinoncî»."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Asteure, vos poloz bén tchoezi les kés siervices ki s' divèt mete en "
-"alaedje\n"
-"cwand c' est ki vosse copiutrece s' enonde.\n"
-"\n"
-"Chal sont prezintés tos les siervices k' i gn a el astalåcion do moumint.\n"
-"Prindoz sogne delzès verifyî et disclitchîz les cis k' i gn end a pont\n"
-"tofer mezåjhe a l' enondaedje.\n"
-"\n"
-"Cwand vosse sori passe å dzeu d' on siervice, ene racsegne aparet po\n"
-"vos dire çu ki l' siervice fwait. Si vos n' estoz nén seur si on siervice\n"
-"est ahessåve por vos ou nén, vos estoz todi a houte tot l' leyant a si\n"
-"prémetowe valixhance.\n"
-"\n"
-"Loukîz a vosse sogne si voste éndjole serè eployeye come sierveu: c' est\n"
-"dandjureu mî di n' nén enonder les siervices ki vos n' avoz nén dandjî!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux manaedje l' eure e tins GMT (coisrece di Greenwich) et l' candje\n"
-"en eure locåle sorlon li coisrece d' eureye ki vs avoz tchoezi. C' est\n"
-"possibe di l' essocter si vos tchoezixhoz «L' ôrlodje del éndjolreye\n"
-"metowe e tins universel (GMT)» po-z aveur li minme eure pol sistinme eyet\n"
-"pol divintrinne ôrlodje. Çoula pout esse ahessåve cwand i gn a in ôte\n"
-"sistinme d' operance (come li Windows metans) so l' éndjole, et k' i\n"
-"n' sait nén eployî li tins universel.\n"
-"\n"
-"Li tchûze «Sincronijhaedje otomatike del eure» va sincronijhî otomaticmint\n"
-"l' ôrlodje. Po çoula on raloyaedje est fwait so on sierveu d' eure sol\n"
-"daegntoele. Tchoezixhoz onk, sol djîvêye ki vs est prezintêye, ki n' seuye\n"
-"nén lon erî di wice ki vos dmeurez. Bén seur vos dvoz aveur on raloyaedje\n"
-"al rantoele en alaedje po-z eployî cisse tchûze chal. Çoul astalrè so voste\n"
-"éndjole on sierveu d' eure ki poreut ossu esse eployî pa d' ôtès\n"
-"copiutreces, par egzimpe les cenes d' ene rantoele locåle, si vos vloz."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (po Sistinme di Purneas X) est l' miercour di l' eterface grafike di\n"
-"GNU/Linux, ki tos les evironmints grafikes (KDE, Gnome, AfterStep,\n"
-"WindowsMaker, evnd.) ki vnèt avou Mandrake Linux end ont mezåjhe.\n"
-"Dins cisse seccion chal, DrakX va sayî d' apontyî X otomaticmint.\n"
-"\n"
-"C' est foirt foirt råle ki ça n' åye nén, a pus k' si l' éndjolreye est\n"
-"foirt viye (ou foirt noûve). Si tot va comufåt, X srè enondé otomaticmint\n"
-"avou li meyeuse finté possibe pol grandeu di vosse waitroûle. On purne\n"
-"srè adon håyné ki vos dmandrè si vos l' poloz vey.\n"
-"\n"
-"Si vos fjhoz on astalaedje «Sipepieus», vos mousroz el macrea\n"
-"d' apontiaedje di X. Loukîz li seccion corespondante do manuel po\n"
-"pus d' informåcions sol macrea.\n"
-"\n"
-"Si vos ploz vey li messaedje clitchîz so «Oyi», DrakX va adon passer a\n"
-"l' étape shûvante. Si vos n' voeyoz nén li messaedje, çoula vout dire\n"
-"tot simplumint ki l' apontiaedje n' est nén corek et l' saye va fini\n"
-"10 segondes pus tård, rimetant l' waitroûle come divant."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Li prumî côp ki vos alez sayî l' apontiaedje di X, i s' pout k' i n' vs\n"
-"åye nén (waitroûle trop ptite, imådje rideye viè l' droete ou\n"
-"l' hintche...). C' est l' råjhon ki DrakX vos dmande, minme cwand X a stî\n"
-"enondé comufåt, si vos estoz d' acoird avou l' apontiaedje. I vos propozrè\n"
-"eto del candjî, tot vs mostrant ene djîvêye des môdes di håynaedje valides\n"
-"ki vos ploz tchoezi po voste cåte vidéyo.\n"
-"\n"
-"Come dierinne solucion, si vos n' arivez todi nén a fé aler X, tchoezixhoz\n"
-"«Candjî cåte grafike», tchoezixhoz «Unlisted», eyet cwand on vos dmandrè\n"
-"li ké sierveu X ki vos vloz, prindoz li «FBDev». C' est ene tchûze ki\n"
-"rotrè avou bråmint di cåtes vidéyo modienes. Tchoezixhoz «Sayî co ene feye»\n"
-"po-z esse seur."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Al fén, on vos dmandrè si vos vloz kel eterface grafike seuye en alaedje\n"
-"cwand l' éndjole est enondêye. Notez k' cisse kesse vos srè fwaite minme\n"
-"si vos tchoezixhoz di n' nén sayî l' apontiaedje del cåte vidéyo.\n"
-"Bén seur, si voste éndjole va-st ovrer come on sierveu, ou si vos n' arivez\n"
-"nén a-z apontyî l' cåte vidéyo, vos ploz risponde «Neni»."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Li plake lazer di Mandrake Linux a-st on môde rapexhaedje. Vos l' poloz\n"
-"eployî tot-z enondant l' éndjole sol plake lazer eyet tchoukî sol tape\n"
-"«F1» pôy sicrire «rescue» sol roye d' intrêye. Mins si vosse copiutrece\n"
-"ni sait nén enonder so ene plake lazer, vos dvrîz rvini vey l' aidance\n"
-"po ciste etape dins deus ôtes situwåcions:\n"
-"\n"
-" * å moumint d' astaler l' enondrece, DrakX va riscrire li secteu\n"
-"d' enondaedje (MBR) del mwaisse deure plake (a moens ki vos eployrîz ene\n"
-"ôte enondrece) po vos poleur enonder ossu bén avou Windows k' avou\n"
-"GNU/Linux (dins l' cas ki vos årîz Windows so l' éndjole, bén seur).\n"
-"Si vos avoz mezåjhe di rastaler Windows, li porcessus d' astalåcion da\n"
-"Microsoft va riscrire li secteu d' enondaedje, et vos n' poroz pus\n"
-"enonder GNU/Linux!\n"
-"\n"
-" * s' i gn a on problinme et ki vos n' savoz nén enonder GNU/Linux a\n"
-"pårti del deure plake, cisse plakete serè li seu moyén d' enonder\n"
-"GNU/Linux. Ele a å dvins sacwantès usteyes sistinme ki vs permetront\n"
-"di fé des reparåcions sol sistinme (k' il åye divnou cromb cåze d' ene\n"
-"côpeure electrike, d' ene aroke tot tapant ene comande, on rovioaedje\n"
-"do scret di root, ou tot l' minme li kéne råjhon).\n"
-"\n"
-"Cwand vos clitchîz so ciste étape chal, i vos srè dmandé di mete ene\n"
-"plakete dins l' lijheu. Li plakete doet esse vûde oudobén aveur des\n"
-"informåcions ki polèt esse disfacêyes. I gn a nén mezåjhe ki vos\n"
-"l' abwesnîz, ca DrakX va riscrire totafwait li plactêye."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Asteure, vos dvoz tchoezi wice ki vos vloz astaler vosse sistinme\n"
-"d' operance Mandrake Linux so vosse deure plake. Si l' plake est vûde,\n"
-"ou si les sistinmes d' operance k' i gn a ddja prindèt tote li plaece,\n"
-"vos avoz mezåjhe del pårti. Fé on pårtixhaedje d' ene deure plake çoula\n"
-"vout dire del pårti lodjicmint po fé del plaece po-z astaler vosse novea\n"
-"sistinme Mandrake Linux.\n"
-"\n"
-"Come, on côp ki li pårtixhaedje est fwait, on n' sait rivni en erî\n"
-"(normålmint), les apurdisses ont sovint sogne ou peu di s' enonder.\n"
-"Awoureuzmint, i gn a on macrea ki vs aidrè po l' fé.\n"
-"Tapez on côp d' ouy sol documintåcion et purdoz vosse tins.\n"
-"\n"
-"Si vos avoz enondé l' astalaedje e môde sipepieus, vos alez intrer el\n"
-"usteye di pårtixhaedje di Mandrake Linux: li DiskDrake. Avou lu vos ploz\n"
-"apontyî foirt sipepieuzmint vos pårticions. Loukîz å tchaptrea so DiskDrake\n"
-"del documintåcion k' esplike kimint l' eployî comufåt. Vos ploz ossu\n"
-"eployî les macreas, po çoula clitchîz sol boton «Macrea» del usteye di "
-"pårtixhaedje.\n"
-"\n"
-"Si les pårticions ont ddja stî fwaites (d' on astalaedje fwait d' avance\n"
-"oudobén avou ene ôte usteye di pårtixhaedje), i sufit di tchoezi\n"
-"ces pårticions la po les eployî pol astalaedje di vosse sistinme GNU/Linux.\n"
-"\n"
-"Si les pårticions n' ont nén ddja stî fwaites, vos les dvoz askepyî.\n"
-"Po fé çoula, eployîz l' macrea k' i gn a chal pa dzeur. Sorlon "
-"l' apontiaedje\n"
-"di vosse deure plake, pluzieurès solucions sont possibes:\n"
-"\n"
-" * Eployî l' plaece libe: çouchal frè tot simplumint on pårtixhaedje\n"
-"otomatike del plaece vûde so les deures plakes da vosse;\n"
-"vos n' avoz a vos prewocuper di rén après.\n"
-"\n"
-" * Eployî les pårticions k' i gn a: li macrea a detecté ene ou pus di\n"
-"pårticions Linux k' egzistèt ddja so vosse deure plake.\n"
-"Si vos les vloz wårder, prindoz cisse tchûze chal. \n"
-"\n"
-" * Eployî l' plaece libe sol pårticion Windows: si Microsoft Windows est\n"
-"astalé so vosse deure plake et s' i prind tote li plaece k' i gn a,\n"
-"vos dvoz fé del plaece libe po les dnêyes di Linux. Po çoula vos ploz\n"
-"disfacer li pårticion Microsoft Windows et totes ses dnêyes (voeyoz les\n"
-"solucions «Disfacer li plake etire» ou «Môde sipepieus») oudobén raptixhî\n"
-"vosse pårticion Microsoft Windows.\n"
-"Li candjmint d' grandeu des pårticions si pout fé sins piede des dnêyes.\n"
-"Cisse solucions est rcomindêye si vos vloz eployî Mandrake Linux et\n"
-"Microsoft Windows sol minme copiutrece.\n"
-"\n"
-"Divant di tchoezi cisse solucion, i vos fåt comprinde kel grandeu di vosse\n"
-"pårticion Microsoft Windows srè pus ptite ki çu k' ele est asteure.\n"
-"Dj' ô bén, vos åroz moens di plaece libe so Microsoft Windows po wårder\n"
-"les dnêyes da vosse ou astaler des noveas programes.\n"
-"\n"
-" * Disfacer li plake etire: si vos vloz disfacer totes les dnêyes k' i gn a\n"
-"so vosse deure plake po mete el plaece li sistinme Mandrake Linux,\n"
-"vos ploz tchoezi cisse tchûze chal.\n"
-"Prindoz asteme k' avou cisse solucion chal vos n' poroz nén rivni en erî\n"
-"on côp ki vos avoz acertiné vosse tchûze.\n"
-"\n"
-"  !! Avou cisse tchûze chal, totes les dnêyes del deure plake sront "
-"pierdowes !!\n"
-"\n"
-" * Bodjî Windows(tm) foû: çouchal va simplumint disfacer ttafwait sol\n"
-"deure plake eyet cmincî on novea pårtixhaedje. Totes les dnêyes sol\n"
-"deure plake vont esse pierdowes.\n"
-"\n"
-"  !! Avou cisse tchûze chal, Tot çu k' i gn a el deure plake srè "
-"pierdou. !!\n"
-"\n"
-" * Môde sipepieus: si vos vloz fé manuwelmint li pårtixhaedje del deure "
-"plake,\n"
-"vos ploz tchoezi çouchal. Mins prindoz asteme, avou cisse solucion chal\n"
-"vos poroz fé es poûxhantès mins dandjureusès sacwès.\n"
-"Vos ploz åjheymint piede totes vos dnêyes. Adon, ni tchoezixhoz nén\n"
-"çouchal, a moens di vormint saveur çu k' vos fjhoz."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Vosse novea sistinme d' operance Mandrake Linux s' astale pol moumint.\n"
-"Sorlon li nombe di pacaedjes ki vos avoz prindou eyet l' roedeu del\n"
-"copiutrece da vosse, ciste operåcion pout n' prinde ki sacwantès munutes\n"
-"oudobén on consecant hopea d' tins.\n"
-"\n"
-"Tårdjîz on pô s' i vs plait."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Divant d' aler pus avant, vos dvrîz lere atintivmint l' licince.\n"
-"Ele covere li distribucion Mandrake Linux, si vos n' estoz nén d' acoird\n"
-"avou les termes del licince, clitchîz sol boton «Nén accepter». Çoula\n"
-"aresteyrè pår l' astalaedje. Po continouwer avou l' astalaedje clitchîz\n"
-"sol boton «Accepter»."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Chal, c' est po tchoezi l' livea di såvrité ki vos vloz po voste éndjole.\n"
-"Ene rîle simpe c' est ki pus voste éndjole est egzposêye, pus les dnêyes\n"
-"k' i gn a å dvins sont impôrtantes, pus li livea di såvrité doet esse hôt.\n"
-"Mins ossu, on hôt livea di såvrité çoula vout dire ki c' est moens åjhey\n"
-"d' eployî li copiutrece. Lijhoz li tchaptrea so MSEC el\n"
-"«Manuel di Referince» po-z aveur pus d' informåcions so les diferins\n"
-"liveas k' i gn a.\n"
-"\n"
-"Si vos n' savoz cwè tchoezi, leyîz li prémetou livea."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Chal, vos dvoz tchoezi so kéne/kénès pårticion(s) ki vos voloz astaler\n"
-"vosse sistinme Mandrake Linux. Si vos pårticions ont ddja stî fwaites\n"
-"(p. egz. li dierin côp ki vos avoz astalé GNU/Linux ou bén avou ene ôte\n"
-"usteye di pårtixhaedje). Dins les ôtes cas, des pårticions dvèt esse \n"
-"defineyes so vosse deure plake. Ça vout dire ki vos alez dispårti\n"
-"lodjicmint li deure plake di voste éndjole e diferinnes coines separêyes\n"
-"di ene l' ôte.\n"
-"\n"
-"Po fé les pårticions, vos dvoz d' apreume tchoezi li plake a pårti e\n"
-"clitchant so «hda» pol prumire plake IDE, «hdb» pol deuzinme, «sda» pol \n"
-"prumire plake SCSI, et vos nd åroz.\n"
-"\n"
-"Pol pårtixhaedje del deure plake tchoezeye, vos ploz prinde ene di ces\n"
-"tchûzes chal:\n"
-"\n"
-"   * Tot netyî: cisse tchûze va disfacer totes les pårticions k' i gn a sol "
-"tchoezeye deure plake.\n"
-"\n"
-"   * Grandeu otomatike: cisse tchûze va fé des pårticions Ext2 pol sistinme "
-"et ene di swap e prindant li plaece di libe k' i gn a sol deure plake et "
-"carculant otomaticmint li grandeu li meyeuse.\n"
-"\n"
-"   * Rapexhî li tåve di pårtixhaedje: si vosse tåve di pårtixhaedje est "
-"crombe, vos ploz sayî del rapexhî avou cisse tchûze chal. Prindoz asteme et "
-"rimimbrez-ve ki çoula pout ni nén roter a tos les côps.\n"
-"\n"
-"   * Disfé: clitchîz so ci boton la po disfé tos vos candjmints.\n"
-"\n"
-"   * Ritcherdjî: Cisse tchûze chal c' est si vos vloz disfé tos les "
-"candjmints et tcherdjî vosse tåve di pårtixhaedje di dpårt.\n"
-"\n"
-"   * Macrea: Si vos vloz aveur l' aidance d' on macrea po fé li pårtixhaedje "
-"del deure plake, vos ploz tchoezi cisse tchûze chal. Ele est ricomandêye si "
-"vos n' estoz nén on spepieus e pårtixhaedje.\n"
-"\n"
-"   * Rifé a pårti d' ene plakete: si vos avîz schapé vosse tåve di "
-"pårtixhaedje dins ene plakete å moumint d' ene ôte astalåcion, vos l' poloz "
-"rapexhî avou cisse tchûze chal.\n"
-"\n"
-"   * Schaper e ene plakete: si vos vloz schaper vosse tåve di pårtixhaedje "
-"dins ene plakete, ki vos poroz eployî pus tård pol rapexhî. C' est bråmint "
-"ricomande del fé.\n"
-"\n"
-"   * Fwait: on côp ki vos avoz fini li pårtixhaedje del deure plake, "
-"tchoezixhoz çouchal po schaper po d' bon les candjmints.\n"
-"\n"
-"Note: vos ploz tot fé pår avou l' taprece: naivyîz d' ene pårticion a l' ôte "
-"avou li tape Tab et les fretches Up/Down.\n"
-"\n"
-"Cwand ene pårticion a stî tchoezeye, vos poloz fé:\n"
-"\n"
-"     * Ctrl-C  po fé ene novele pårticion (cwand c' est ene vûde pårticion "
-"k' a stî tchoezeye)\n"
-"\n"
-"     * Ctrl-d  po disfacer li pårticion\n"
-"\n"
-"     * Ctrl-m  po defini li pont di montaedje\n"
-"\n"
-"si vos alez astaler sor ene éndjole PPC, motoit ki vos voroz fé ene pitite "
-"pårticion HFS «d' enondaedje» di 1 Mo å moens po l' eployî avou l' enondrece "
-"«yaboot». Si vos decidez del fé on pô pus grande, par egzimpe 50 Mo, çoula "
-"poreut fé ene clapante plaece po-z î mete on nawea et ene imådje ramdisk po "
-"des cas d' urdjince k' i gn åreut."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Chal pa dzeur i gn a ene djîvêye des pårticions Windows k' i gn a so vosse "
-"deure plake et ki on stî detectêyes. Tchoezixhoz li cene ki vos vloz candjî "
-"si grandeu, s' i vs plait.\n"
-"\n"
-"Pol informåcion, tchaeke pårticion est mostrêye come çoula:\n"
-"«no Linux», «no Windows», «grandeu».\n"
-"\n"
-"Li «no Linux» est costrut come çouchal:\n"
-"«sôre del deure plake» + «limerô del deure plake» + «limerô del "
-"pårticion» (par egzimpe, hd+a+1 --> «hda1»)\n"
-"\n"
-"Li «sôre del deure plake» est «hd» si vosse deure plake est del sôre IDE, "
-"oudobén «sd» si elle est del sôre SCSI.\n"
-"\n"
-"Li «limerô del deure plake» est todi ene lete pa drî «hd» ou «sd».\n"
-"Avou les plakes IDE on a:\n"
-"\n"
-"   * «a» pol plake mwaisse sol prumî controleu IDE,\n"
-"\n"
-"   * «b» pol plake esclave sol prumî controleu IDE,\n"
-"\n"
-"   * «c» pol plake mwaisse sol deuzinme controleu IDE,\n"
-"\n"
-"   * «d» pol plake esclave sol deuzinme controleu IDE.\n"
-"\n"
-"\n"
-"Avou les plakes SCSI, «a» vout dire «prumire deure plake», «b» vout dire "
-"«deuzinme deure plake», evnd...\n"
-"\n"
-"Li «no Windows» est li lete ki Windows eploye po-z idéntifyî li pårticion "
-"(par egzimpe li prumire pårticion Windows del prumire deure plake est lomêye "
-"«C:»)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Tårdjîz on pô s' i vs plait. Cisse operåcion pout prinde sacwantès munutes."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Asteure DrakX a mezåjhe di saveur si vos vloz fé li prémetou («Consyî») "
-"astalaedje oudobén si vos vloz aveur pus di contrôle («Sipepieus»). Vos ploz "
-"ossu tchoezi di fé on novea astalaedje oudobén on metaedje a djoû d' on "
-"sistinme Mandrake Linux dedja astalé. Si vos tchoezixhoz «Astalaedje» li vî "
-"sistinme srè totafwait disfacé del deure plake. Tchoezixhoz «Metaedje a "
-"djoû» si vos vloz mete a djoû ou rapexhî ene modêye dedja astalêye di "
-"Mandrake Linux. Tchoezixhoz «Metaedje a djoû des pacaedjes seulmint» si vos "
-"vloz mete a djoû les pacaedjes d'| ene modêye di Mandrake Linux sol deure "
-"plake sins rén candjî d'| ôte.\n"
-"\n"
-"Tchoezixhoz «Astalaedje» s' i gn a nole modêye di Mandrake Linux sol deure "
-"plake, ou si vos vloz tchoezi inte sacwants sistinmes d' operance a "
-"l' enondaedje.\n"
-"\n"
-"Tchoezixhoz «Metaedje a djoû» si vos voloz mete a djoû ou rapexhî ene modêye "
-"dedja astalêye di Mandrake Linux. Tchoezixhoz «Metaedje a djoû des pacaedjes "
-"seulmint» po n' nén candjî les apontiaedjes.\n"
-"\n"
-"Sorlon vosse livea di cnoxhance do sistinme GNU/Linux, vos ploz tchoezi onk "
-"des liveas shûvants po astaler ou mete a djoû vosse sistinme d' operance "
-"Mandrake Linux:\n"
-"\n"
-" * Consyî: si vos n' avoz co måy astalé GNU/Linux.\n"
-"L' astalaedje srè foirt åjhey et vos n' åroz ki sacwantès kesses a "
-"risponde.\n"
-"\n"
-" * Sipepieus: si vos estoz in espert di GNU/Linux eyet ki vos voloz en "
-"astalaedje tot etir a vosse môde, cisse tchûze chal est por vos! Vos poroz "
-"tchoezi li sôre d' astalaedje sorlon çu ki vos vloz fé avou voste éndjole "
-"del minme manire k' avou «A vosse môde».\n"
-"Çoula pout esse målåjhey di rsponde a des kesses k' i gn a si vos n' avoz "
-"nén ene grande conoxhance di GNU/Linux. Adon ni tchoezixhoz cisse classe "
-"d' astalaedje chal si vos n' savoz nén çu ki vos fjhoz."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normålmint, DrakX va tchoezi li bone taprece por vos (sorlon l' lingaedje ki "
-"vos avoz tchoezi) et vos n' voeroz motoit nén ciste étape. Mins, i s' pout "
-"ki vos åyoxhe ene taprece diferinne: par egzimpe, ene djin ki djåzreut "
-"inglès mins vicreut el Swisse, ele voreut cwand minme ene swisse taprece. "
-"Oudobén si vos avoz tchoezi l' walon mins ki vos avoz ene taprece francesse "
-"ou qwerty purade k' ene taprece belje. Dins les deus cas, vos dvroz aler en "
-"erî disk' al ciste étape d' astalaedje, eyet tchoezi li bone taprece foû del "
-"djîvêye.\n"
-"\n"
-"Clitchîz so «Co des ôtes» po-z aveur li djîvêye etire di totes les tapreces "
-"ki sont sopoirtêyes."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Tchoezixhoz l' lingaedje ki vos vloz eployî po l' astalaedje et come "
-"prémetou lingaedje do sistinme.\n"
-"\n"
-"Si vos clitchîz so «Sipepieus» vos poroz tchoezi d' aveur do sopoirt po ds "
-"ôtes lingaedjes avou. Cwand vos tchoezixhoz on ôte lingaedje les fitchîs "
-"specifikes po ci lingaedje la (ratournaedjes, aidance, documintåcions, "
-"coridjreces,...) sront astalés. Par egzimpe, si vos alez aveur so voste "
-"éndjole on ûzeu ki vént del Sipagne, clitchîz sol sitoele corespondant a "
-"«Spanish|Spain».\n"
-"\n"
-"Notez ki vos ploz astaler li sopoirt po bråmint des lingaedjes, si vos les "
-"vloz tos (tos les cis sopoirtés pol moumint, come di djusse), clitchîz sol "
-"sitoele «Tos» al difén del djîvêye. Cisse tchûze la est ahessåve po ene "
-"éndjole ki srè eployeye pa des djins di tolminme ké payis.\n"
-"\n"
-"On côp ki vos avoz tchoezi les locåles ki vos vloz, clitchîz so «I va» po "
-"passer a l' étape shûvante."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX, si on lî dit rén, pinsrè ki vos avoz ene sori di deus botons, et va "
-"mete en alaedje l' emulåcion do troezinme boton. DrakX sårè otomaticmint si "
-"vosse sori est ene sori PS/2, séreye oudobén USB.\n"
-"\n"
-"Si vos vloz defini ne sôre di sori diferinne, tchoezixhoz li sôre k' i fåt "
-"el djîvêye.\n"
-"\n"
-"Si vos fjhoz ene tchûze diferinne del prémetowe, DrakX vos mosterrè on "
-"purnea po sayî l' sori. Sayîz les botons et li rôlete po vey si tot va "
-"comufåt. Si l' sori ni rote nén comufåt, tapez so l' espace, oudobén so "
-"RETURN ou clitchî so «Rinoncî» po ndè tchoezi ene ôte."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Tchoezixhoz li bon pôrt.  Metans: li pôrt «COM1» dzo MS Windows si lome\n"
-"«ttyS0» dzo GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader, ou enondrece di GNU/Linux) eyet Grub siervèt a enonder\n"
-"GNU/Linux ou tot l' minme li kén ôte sistinme d' operance k' i gn åreut\n"
-"so voste éndjole.  Normålmint, les ôtes sistinmes d' operance\n"
-"sont foirt bén ricnoxhous et astalés.  Si ça n' va nén tot seu, vos poloz\n"
-"radjouter ene intrêye al mwin dins cisse pådje ci.  Loukîz do dner les\n"
-"bons parametes, seulmint. \n"
-"\n"
-"Vos poloz eto tchoezi di n' nén leyî tot l' minme kî enonder ces sistinmes\n"
-"d' operance la.  Mins a ç' moumint la, i vos fårè ene plakete d' enondaedje\n"
-"(boot disk) po ls enonder."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vaici, vos dvoz dire wice ki vos voloz mete\n"
-"l' informåcion ki GNU/Linux end a mezåjhe po s' enonder.\n"
-"\n"
-"Tchoezixhoz «Prumî secteu del plake (MBR)»... a pus ki vos\n"
-"sårîz foirt bén çu ki vos fjhoz."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX va cweri après on/des éndjins IDE so vosse copiutrece. I va ossu\n"
-"cweri après ene/des cåte(s) SCSI e PCI. Si ene cåte SCSI est trovêye\n"
-"DrakX va-st astaler otomaticmint li mineu k' i gn a mezåjhe.\n"
-"\n"
-"Come pa des côps li deteccion del éndjolreye ni sait nén trover ene sacwè\n"
-"DrakX vos dmandrè si vos avoz ene cåte PCI SCSI ou nén. Clitchîz so «Oyi»\n"
-"si vos savoz k' i gn en a ene so l' éndjole. Ene djîvêye di mineu serè\n"
-"håynêye po ki vos poloxhe tchoezi li mineu ki convént.\n"
-"Clitchîz so «Neni» si vos n' avoz nole cåte SCSI.\n"
-"Si vos n' estoz nén seur vos ploz loukî al djîvêye di l' éndjolreye k' a\n"
-"stî trovêye e voste éndjole, po çoula clitchîz sol boton «Voeyîz les\n"
-"informåcions sol éndjolreye».\n"
-"\n"
-"Si vos dvoz tchoezi manuwelmint vosse mineu, DrakX vos dmandrè si vos voloz\n"
-"mete des tchûzes por lu. Mins po cmincî, leyîz li mineu rconoxhe tot seu\n"
-"voste éndjolreye: d' acostumance, ça va tot seu.\n"
-"\n"
-"Si ça n' va nén tot seu, vos dvroz dner les informåcions pol mineu "
-"manuwelmint.\n"
-"Waitîz d' obtini tos les racsegnmints dins li documintåcion (el tchaptrea "
-"3,\n"
-"seccion «Ramexhner des informåcions sol éndjolreye») po des racsegnes so\n"
-"cmint ramexhner les parametes k' i gn a mezåjhe foû del documintåcion\n"
-"ki vént avou l' éndjin, del waibe do costrujheu (si vos avoz on accès\n"
-"al rantoele daegnrece) ou a pårti di Windows (si vos avoz Windows d' astalé)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Chal sont prezintés sacwants parametes k' ont a vey avou voste éndjole.\n"
-"Sorlon çou k' vos avoz come éndjolreye vos voeroz, ou nén, ene ou sacwantes\n"
-"des intrêyes shûvantes:\n"
-"\n"
-" * «Sori»: verifyîz l' apontiaedje del sori eyet clitchîz sol boton pol\n"
-"candjî, s' i fåt.\n"
-"\n"
-" * «Taprece»: verifyîz l' apontiaedje del taprece et clitchoz sol boton\n"
-"pol candjî, s' i fåt.\n"
-"\n"
-" * «Coisse d' eureye»: Li prémetowe coisse d' eureye est tchoezeye pa\n"
-"DrakX sorlon li lingaedje/payis ki vs avoz tchoezi. Mins chal avou, come\n"
-"avou l' tchûze del taprece, i s' pout ki vos n' seuyîz nén dins el payis\n"
-"do lingaedje ki vs avoz tchoezi. Adon vos ploz clitchî sol boton\n"
-"«Coisse d' eureye» po-z apontyî vosse ôrlodje avou l' eure locåle del\n"
-"plaece wice ki vos dmeurez.\n"
-"\n"
-" * «Sicrirece»: si vos clitchîz so «Nole sicrirece» çoula enondrè li macrea\n"
-"d' apontiaedje des scrireces.\n"
-"\n"
-" * «Cåte son»: si ene cåte son est detectêye so vosse sistinme, ele srè\n"
-"metowe chal. On pout nén modifyî ses parametes tins d' l' astalaedje.\n"
-"\n"
-" * «Cåte tévé»: si ene cåte tévé est detectêye so vosse sistinme, ele srè\n"
-"metowe chal. On pout nén modifyî ses parametes tins d' l' astalaedje.\n"
-"\n"
-" * «Cåte RDIS»: si ene cåte RDIS (ISDN) est detectêye so vosse sistinme,\n"
-"ele srè metowe chal. Vos ploz clitchî sol boton po candjî ses parametes."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Tchoezixhoz li deure plake ki vos vloz disfacer po-z î astaler vosse\n"
-"novele pårticion Mandrake Linux. Prindoz asteme, totes les dnêyes\n"
-"k' i gn a sol deure plake vont esse pierdowes, et vos n' poroz les rapexhî."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Clitchîz so «I va» si vos vloz disfacer totes les dnêyes et totes les\n"
-"pårticions k' i gn a so vosse deure plake.\n"
-"Prindoz asteme, dispôy aveur clitchî so «I va», vos n' poroz pus rapexhî\n"
-"nole dinêye ou pårticion k' i gn aveut sol deure plake, nerén les cis\n"
-"da Windows.\n"
-"\n"
-"Clitchîz so «Rinoncî» po rinoncî a cisse operåcion, et leyî les dnêyes\n"
-"et les pårticions come ele estént sol deure plake."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Dji n' sai vey les modules po vosse nawea (i gn a pont d' fitchî %s), çoula "
-"vout probablumint dire ki vosse plakete d' enondaedje n' a nén stî fwait pol "
-"sopoirt d' astalaedje ki vos vloz eployî. Vos dvrîz fé ene nouve plakete, a "
-"pårti des imådjes ki vnèt avou li modêye di Mandrake Linux ki vos vloz "
-"astaler"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Vos dvoz abwesner eto %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vos avoz tchoezi le(s) sierveu(s) shûvant(s): %s\n"
-"\n"
-"\n"
-"Ces sierveus sront activés a l' enondaedje del éndjole. I n' ont nén\n"
-"di probleme di såvrité cnoxhou, mins i s' poreut k' onk seuye trové el "
-"futeur.\n"
-"Dins ç' cas, vos dvroz a tot côp mete a djoû li pacaedje po esse a houte\n"
-"des problemes.\n"
-"\n"
-"\n"
-"Volez-ve vormint astaler ces sierveus?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Dji n' pout eployî li broadcast sins dominne NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Metoz ene plakete FAT-abwesnêye divins li lijheu %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Cisse plakete chal n' a nén stî abwesnêye e FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Po-z eployî cisse tchûze di pacaedjes k' a stî schapêye, enondez "
-"l' astalaedje avou «linux defcfg=floppy»"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Åk n' a nén stî come dji sayîve di lere li fitchî %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Vos avoz del éndjolreye k' a mezåjhe di mineus «proprietaire» po roter\n"
-"Vos trovroz del informåcion so zels so: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vos dvoz aveur ene pårticion raecene.\n"
-"Po çoula, fijhoz ene pårticion (ou clitchîz so ene ki egzisteye ddja).\n"
-"Et pôy tchoezixhoz «Pont di montaedje» et metoz-lu come «/»"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Vos dvoz aveur ene pårticion di swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vos n' avoz nole pårticion di swap\n"
-"\n"
-"Voloz-ve vormint continuwer?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vos dvoz aveur ene pårticion FAT montêye so /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Eployî l' plaece libe"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nén del plaece libe assez po fé des noveles pårticions"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Eployî les pårticions k' i gn a"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "I gn a nén des pårticions po-z eployî"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Eployî li pårticion Windows pol loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kéne pårticion voloz-ve eployî po-z î mete Linux4win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Tchoezixhoz les grandeus"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Grandeu del pårticion raecene e Mo: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Grandeu del pårticion di swap e Mo: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Eployî l' plaece libe sol pårticion Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kéne pårticion voloz-ve candjî si grandeu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Dji carcule les limites do sistinme di fitchîs di Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Li candjmint di grandeu di vosse pårticion FAT n' a nén stî, \n"
-"a cåze del aroke shûvante: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Vosse pårticion Windows est trop fragméntêye, i fåreut eployî «defrag»"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ASTEME!\n"
-"\n"
-"Asteure, DrakX va candjî li grandeu di vosse pårticion Windows.\n"
-"Loukîz a vos: çoula est dandjureu. Si vos n' l' avoz nén co fwait,\n"
-"enondez (so Windows) scandisk (et motoit defrag) so cisse pårticion\n"
-"et s' fijhoz ene copeye di såvrité di vos dnêyes dvant di renonder \n"
-"l' astalaedje.\n"
-"Cwand vos seroz seur di vos, clitchîz so «I va»."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kéne grandeu voloz-ve wårder po Windows sol "
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "pårticion %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Li candjmint di grandeu pol pårticion FAT a fwait berwete: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"I gn a pont di pårticions FAT po candjî leu grandeu, ou po-z eployî pol "
-"loopback (oudobén i n' resse nén del plaece assez)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Disfacer li plake etire"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Bodjî Windows(tm) foû"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vos avoz pus d' ene deure plake, sol kéne voloz-ve astaler Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TOTES les pårticions et totes les dnêyes å dvins vont esse pierdowes sol "
-"deure plake %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Pårtixhaedje da vosse del deure plake"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Eployî fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Asteure vos poloz pårti vosse deure plake %s\n"
-"Cwand vos åroz fini, ni rovyîz nén di schaper avou «w»"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "I gn a pont del plaece libe assez sol pårticion Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Dji n' a savu trover del plaece po l' astalåcion"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Li Macrea di Pårtixhaedje di DrakX a trové les solucions shûvantes:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Li pårtixhaedje n' a nén stî: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Metant li rantoele en alaedje"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Dj' aresteye li rantoele"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Åk n' a nén stî, et dji n' sai cmint m' saetchî l' cou foû des\n"
-"strons. Si vos continuwez, vos duvroz tirer vosse plan tot seu."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Vos avoz deus côps li pont d' montaedje %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sacwants consecants pacaedjes n' ont nén stî astalés comufåt.\n"
-"Motoit vosse lijheu di plakes lazer, oudobén vosse plake lazer, ont\n"
-"des rûjhes.\n"
-"Verifyîz vosse plake lazer sor ene copiutrece ddja astalêye, avou\n"
-"l' comande «rpm -qpl Mandrake/RPMS/*.rpm»\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Wilicome a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nou lijheu di plaketes disponibe"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Intrant e l' étape '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vosse sistinme a po di rsources. Vos pôrîz aveur des rûjhes po\n"
-"l' astalåcion di Mandrake Linux. Si çoula arive, vos ploz sayî ene\n"
-"astalåcion e môde tecse. Po çoula, tchoûkîz sol tape «F1» a l' enondaedje\n"
-"et pôy tapez «text»."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe d' astalåcion"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Tchoezixhoz ene des classes d' astalåcion shûvantes:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"Po tos les pacaedjes ki vos avoz tchoezi, i vos fårè a pô près %d Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si vos voloz astaler moens ki çoula, \n"
-"tchoezixhoz li porcintaedje di pacaedjes ki vos voloz astaler.\n"
-"\n"
-"On pus bas porcintaedje vout dire k' i gn a ki les pus consecants\n"
-"pacaedjes ki seront astalés.  100 å 100 vout dire ki tos les pacaedjes\n"
-"tchoezis seront astalés."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"So vosse deure plake, i gn a plaece po %d%% des pacaedjes tchoezis.\n"
-"\n"
-"Si vos voloz astaler moens ki çoula, tchoezixhoz on porcintaedje.\n"
-"On bas porcintaedje vout dire k' i gn a ki les pus consecants pacaedjes\n"
-"ki seront astalés.  On porcintaedje di %d%% astalrè ostant di pacaedjes\n"
-"ki possibe."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vos åroz l' ocåzion di tchoezi pus spepieuzmint djusse après."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Åcintaedje des pacaedjes a astaler"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Tchoezi les groupes di pacaedjes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Tchoezi tchaeke pacaedje separemint"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Grandeu å totå: %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Måva pacaedje"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "No: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Modêye: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grandeu: %d Ko\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Impôrtance: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Vos n' poloz tchoezi ci pacaedje chal ca gn a nén del plaece assez ki po "
-"l' astaler"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Les pacaedjes ki shûvèt vont esse astalés"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Les pacaedjes ki shûvèt vont esse disastalés"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Vos n' poloz nén tchoezi/distchoezi ci pacaedje chal"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ci pacaedje est obligatwere, vos n' poloz nén li distchoezi"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vos n' poloz nén distchoezi ci pacaedje chal. Il est ddja astalé"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ci pacaedje ci duvreut esse metou a djoû\n"
-"Estoz seur ki vos l' voloz distchoezi?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Vos n' poloz nén distchoezi ci pacaedje chal. I l' fåt mete a djoû"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostrer les pacaedjes tchoezis otomaticmint"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Astalaedje"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Tcherdjî di/schaper e ene plakete"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Metaedje a djoû del tchûze des pacaedjes"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Astalåcion minimåle"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Tchoezixhoz les pacaedjes k' vos voloz astaler"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Astalant"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Dj' asteme"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tins ki dmeure "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Tårdjîz on pô s' i vs plait, dj' apresteye l' astalaedje"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacaedjes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Astalant li pacaedje %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepter"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Nén accepter"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Candjîz vosse CDROM!\n"
-"\n"
-"Metoz li CDROM lomé «%s» dvins l' lijheu, s' i vs plait;\n"
-"et clitchîz so «I va» on côp ki c' est fwait.\n"
-"Si vos n' l' avoz nén, clitchîz so «Rinoncî» po rinoncî a astaler a pårti\n"
-"di ci CDROM chal."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Dji continowe tot l' minme?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Åk n' a nén stî come dj' arindjîve les pacaedjes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Åk n' a nén stî come dj' astaléve les pacaedjes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Dj' aroke so ene sacwè"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Voloz-ve vormint leyî hatche et matche l' astalaedje?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acoird sol licince"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Taprece"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Tchoezixhoz li sôre di vosse taprece."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Vochal li djîvêye di totes les tapreces k' i gn a"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kéne classe d' astalåcion voloz-ve?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Astaler/Mete a djoû"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "C' est ene astalåcion ou on metaedje a djoû?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Consyî"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Sipepieus"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Metaedje a djoû"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Metaedje a djoû des pacaedjes seulmint"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Tchoezixhoz li sôre di vosse sori."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Pôrt del sori"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Tchoezixhoz li pôrt séreye ki vosse sori est raloyeye dizo."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulåcion des botons"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulåcion do 2inme boton"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulåcion do 3inme boton"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Apontiant les cåtes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Apontiant les éndjins IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nole pårticion di disponibe"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Dji louke ezès pårticions po trover les ponts di montaedje"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Tchoezixhoz les ponts di montaedje"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Dji n' parvén nén a lere li tåve di pårtixhaedje: ele est trop\n"
-"crombe por mi :( Dji m' va sayî di disfacer les mwaijhès pårticions\n"
-"(mins TOTES LES DNÊYES vont esse pierdowes!).\n"
-"L' ôte solucion c' est di nén leyî DrakX candjî li tåve di pårtixhaedje.\n"
-"(l' aroke esta «%s»)\n"
-"\n"
-"Estoz ve d' acoird di piede totes les pårticions?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake n' a nén parvinou a lere li tåve di pårtixhaedje.\n"
-"Si vos continuwez, tirez vosse plan tot seu!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"I gn a pont del plaece po on secteu d' enondaedje di 1 Mo! L' astalåcion "
-"continouwrè, mins i vos fårè fé li pårticion d' enondaedje avou DiskDrake po "
-"poleur enonder vosse sistinme."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nole pårticion raecene di trovêye po-z î fé on metaedje a djoû"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Pårticion Raecene"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kéne est li pårticion raecene (/) so vosse sistinme?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vos dvoz renonder voste éndjole po vosse tåve di pårtixhaedje candjî"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Tchoezixhoz li pårticion a abwesner"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Verifyî s' i gn a des blocs di måvas?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Abwesnant les pårticions"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Dji fwai et abwesner li fitchî %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Li swap n' est nén grande assez po l' astalaedje: vos e dvoz radjouter."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Dji cwir après les pacaedjes k' i gn a"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Dji cwir après les pacaedjes a mete a djoû"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"I gn a pus del plaece assez so vosse sistinme po-z astaler ou mete a djoû (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Complet (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimom (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Consyî (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Tchoezixhoz si vos vloz tcherdjî ou schaper li tchûze des pacaedjes\n"
-"so ene plakete.\n"
-"Li cogne est l' minme ki po les plaketes fwaites pol oto-astalaedje."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Tcherdjî a pårti d' ene plakete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Tcherdjant a pårti d' ene plakete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Tchoezi les pacaedjes"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Metoz ene plakete avou li tchûze des pacaedjes"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Schaper e ene plakete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Li grandeu tchoezeye est pus grande kel plaece ki dmeure"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Sôre d' astalaedje"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Vos n' avoz tchoezi nou groupe di pacaedjes\n"
-"Tchoezixhoz li sôre d' astalåcion minimon ki vos vloz"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Avou X11"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Avou li documintåcion di båze (ricomandé!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Astalåcion vormint minimom (i gn a nén di urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si vos avoz totes les plakes lazer del djîvêye å dzo, clitchîz so «I va».\n"
-"Si vos n' en avoz nole, clitchîz so «Rinoncî».\n"
-"Si seulmint sacwantès plakes ki vos n' avoz nén, adon vos poloz\n"
-"les distchoezi et clitchî so «I va»."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM lomé «%s»"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Dj' apresteye l' astalaedje"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Astalant li pacaedje %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Apontiaedje di post-astalåcion"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Metoz li plakete d' enondaedje dvins li lijheu %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Metoz li plakete avou les modules metous a djoû dvins li lijheu %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Asteure, vos poloz aberweter des programes d' ecriptaedje.\n"
-"\n"
-"ASTEME:\n"
-"\n"
-"Ces programes la estant çu k' i sont, et les lwès di sacwants payis\n"
-"estant çu k' ele sont, les cis k' acatèt ou-z eployî ces programes la\n"
-"dvèt waitî et-z esse seur ki li lwè ls î permet d' aberweter, d' avu, di\n"
-"wårder et d' eployî cisse sôre di programes la.\n"
-"\n"
-"Di pus, l' atchteu eyet/ou l' ûzeu dvèt bén loukî di n' nén aler\n"
-"disconte des lwès di leu payis.  Si l' atchteu ou l' ûzeu finå ni shût\n"
-"nén l' droet do djeu, i pout esse felmint pûni.\n"
-"\n"
-"MandrakeSoft, ses fabricants eyet ses ahesseus ni seront måy tinous po\n"
-"responsåbes di tote rûjhe especiåle, dîreke ou indîreke (metans:\n"
-"piede di rintrêyes, djocaedje des activités, piede di dnêyes\n"
-"comerciåles ou tot l' minme li kéne ôte piede di cwårs, et co les ôtès\n"
-"responsåbilités ou reboursmints k' i fåreut payî so decizion del\n"
-"djustice), ki pôreut advini cåze k' ene sakî a, si sieve ou - tot\n"
-"simplumint - aberweteye ces programes la, ki des atchteus ou des ûzeus\n"
-"finås pôrént eployî après avu siné cist acoird ci.\n"
-"\n"
-"Po tot l' minme li ké racsegnmint å dfait di cist acoird ci, i vos fårè \n"
-"atôchî\n"
-"MandrakeSoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Vos avoz l' possibilité d' aberweter les pacaedjes k' on stî metous\n"
-"a djoû dispôy li fijhaedje del distribucion.\n"
-"\n"
-"Vos åroz des coridjaedjes di såvrité ou di bugs, mins vos dvoz aveur\n"
-"on raloyaedje al daegntoele po l' fé.\n"
-"\n"
-"Voloz vs astaler les pacaedjes metous a djoû?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Dj' atôche li waibe da Mandrake Linux po-z aveur li djîvêye di miroes k' i "
-"gn a"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Tchoezixhoz on miroe po nd aberweter des pacaedjes foû"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Dj' atôche li miroe po-z avu l' djîvêye des pacaedjes"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Dins kéne coisse d' eureye vikez?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "L' ôrlodje del éndjolreye metowe e tins universel (GMT)"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronijhaedje otomatike del eure (avou NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Sierveu NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Sierveu CUPS å lon"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nole sicrirece"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Avoz vs ene cåte son ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Enondez «sndconfig» après l' astalåcion po-z apontyî vosse cåte son"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Nole cåte son di detectêye. Sayîz «harddrake» après l' astalåcion"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Rascourti éndjolreye"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Sori"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Coisse d' eureye"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Sicrirece"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Cåte RDIS"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Cåte son"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Cåte tévé"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fitchîs locås"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Mot di passe root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Nouk mot di passe"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ci mot di passe est trop simpe (i doet esse d' å moens %d letes)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Verifiaedje"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Verifiaedje LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Sierveu LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Verifiaedje NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominne NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Sierveu NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ene plakete d' enondaedje (boot disk) da vosse vos permetrè d' enonder\n"
-"vosse sistinme GNU/Linux sins l' enondeu (boot loader) normå. Ça pout esse\n"
-"ahessåve si vos n' voloz nén astaler SILO so vosse sistinme, ou si in ôte\n"
-"sistinme d' operance waesteye SILO ou co si SILO ni va nén so voste "
-"éndjole.\n"
-"Vosse plakete d' enondaedje pout siervi eto come imådje di såvrité (rescue\n"
-"image), çu ki vos schaprè li djoû ki vosse sistinme toumrè en rac po do "
-"bon.\n"
-"\n"
-"Si vos vloz fé ene plakete d' enondaedje po vosse sistinme, metoz ene\n"
-"plakete dins l' prumî lijheu di plaketes et clitchîz so «I va»."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "prumî lijheu di plaketes"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "deuzinme lijheu di plaketes"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Passer hute"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ene plakete d' enondaedje (boot disk) da vosse vos permetrè d' enonder\n"
-"vosse sistinme GNU/Linux sins l' enondeu (boot loader) normå. Ça pout esse\n"
-"ahessåve si vos n' voloz nén astaler LILO (ou grub) so vosse sistinme,\n"
-"ou si in ôte sistinme d' operance waesteye LILO ou co si LILO ni va nén\n"
-"so voste éndjole.\n"
-"Vosse plakete d' enondaedje pout siervi eto come imådje di såvrité (rescue\n"
-"image), çu ki vos schaprè li djoû ki vosse sistinme toumrè en rac po do "
-"bon.\n"
-"Voloz-ve fé ene plakete d' enondaedje po vosse sistinme?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ASTEME! Vos eployiz on sistinme di fitchîs XFS po vosse pårticion raecene,\n"
-"li fijhaedje d' ene plakete d' enondaedje so ene plakete di 1,44 Mo frè\n"
-"seurmint berwete, ca l' XFS a mezåjhe d' on mineu ki prind del plaece.)"
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Dji rgrete, i gn a nou lijheu di plaketes"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Tchoezixhoz li lijheu di plaketes ki vos voloz eployî po fé li plakete "
-"d' enondaedje"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Metoz ene plakete divins l' %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Dji fwai ene plakete d' enondaedje"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Dj' apresteye l' enondrece"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"I sonle ki voste éndjole est pår trop vîye\n"
-" oudobén k' ele nén cnoxhowe; adon l' enondrece\n"
-" yaboot ni rotrè nén por vos.\n"
-"L' astalaedje va continouwer, mins vos dvroz\n"
-" eployî BootX po-z enonder voste éndjole"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Voloz-ve eployî aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Åk n' a nén stî tot astalant aboot, \n"
-"voloz-ve ki dji saye di foirci l' astalåcion, minme si çoula pout\n"
-"distrure li prumire pårticion ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Astalant l' enondrece"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Åk n' a nén stî e l' astalaedje di l' enondrece. Vochal l' aroke:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Vos alez dveur candjî vosse éndjin d' enondaedje (boot-device) dins\n"
-"vosse Open Firmware, po vos poleur mete en alaedje l' enondeu.\n"
-"Tchoûkîz e minme tins so les tapes Comande-Option-O-F å moumint\n"
-"di l' enondaedje, et pôy tapez:\n"
-"    setenv boot-device %s,\\\\:tbxi\n"
-"et pôy tapez: shut-down\n"
-"A l' enondaedje shûvant del copiutrece vos dvrîz voere li prompt di "
-"l' enondeu."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Metoz ene blanke plakete divins li lijheu %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Dji fé li plakete d' enondaedje otomatike"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Sacwantès étapes n' ont nén stî fwaites,\n"
-"\n"
-"Volez-ve vormint cwiter asteure?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitåcions, l' astalåcion a stî fwaite.\n"
-"Bodjîz li sopoirt d' enondaedje et tapez so Return po renonder l' éndjole.\n"
-"\n"
-"Po des informåcions so les coridjaedjes k' i gn a po cisse modêye di "
-"Mandrake Linux,\n"
-"loukîz al pådje des Errata sol waibe:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"vos trovroz del informåcion sol apontiaedje do sistinme el tchaptrea\n"
-"sol post-astalåcion do Guide di l' Ûzeu Mandrake Linux Oficir."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Fé li plakete d' astalaedje otomatike"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L' astalaedje pout esse totafwait otomatike si vos vloz,\n"
-"dins ci cas i va abwesner totafwait li deure plake!!\n"
-"(dj' ô bén c' est po-z astaler sor ene noûve éndjole).\n"
-"\n"
-"Motoit ki vos vloz rifé l' astalåcion.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Otomatike"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Rifé"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Schaper li tchûze des pacaedjes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Astalåcion di Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> candjî elemints | <espace> tchoezi | <F12> waitroûlêye shûv."
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "i gn a nou kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "i gn a nou consolehelper"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Tchoezixhoz on fitchî"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Sipepieus"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Di båze"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Tårdjîz on pô, s' i vs plait"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informåcion"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ragrandi l' coxhlaedje"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Raptixhî l' coxhlaedje"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Passer di nou relîjhaedje a on relîjhaedje pa hopeas"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Måva tchûze, sayîz co ene feye\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vosse tchûze? (prémetowe %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Intrêyes ki vos dvroz rimpli:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Vosse tchûze? (0/1, prémetowe %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Boton «%s»: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Voloz-ve clitchî so ç' boton chal?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Vosse tchûze? (prémetowe «%s»%s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> I gn a sacwantès afwaires a tchoezi (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Tchoezixhoz li prumî limerô del fortchete di 10 ki vos vloz aspougnî,\n"
-"oudobén vos ploz djusse taper so Enter po continouwer.\n"
-"Vosse tchûze? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Prindoz asteme k' ene etikete a candjî:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Evoyî cor on côp"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tcheke (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Almande"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Taprece dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espagnole"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finwesse"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francesse"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvedjyinne"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polonesse"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russe"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Suwedwesse"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Taprece do Rweyåme Uni"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Taprece des Etats Unis"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanyinne"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenyinne (vîle modêye)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenyinne (novele modêye)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenyinne (fonetike)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaydjanesse (latene)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belje"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgåre (fonetike)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgåre (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Braezilyinne (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorusse"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Swisse (cogne tîxhone)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Swisse (cogne romande)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tcheke (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Almande (sins moitès tapes"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danwesse"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Taprece dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Taprece Dvorak norvedjyinne"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Taprece dvorak suwedwesse"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonyinne"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Djeordjyinne (cogne russe)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Djeordjyinne (cogne latene)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greke"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongrwesse"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Crowåte"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelyinne"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelyinne (fonetike)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranyinne"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Izlandesse"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itålyinne"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Djaponesse di 106 tapes"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Taprece Koreyinne"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Taprece del Amerike nonnrece"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanyinne AZERTY (vîle modêye)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanyinne AZERTY (novele modêye)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanyinne QWERTY (roye des limerôs)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanyinne QWERTY (fonetike)"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Letone"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonyinne"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Neyerlandesse"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polonesse (cogne QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polonesse (cogne QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portuguesse"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadyinne (Québec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Roumin (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Roumin (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russe (YAVERTY)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenyinne"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovake (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovake (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbe (cirilike)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamoule"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tailandesse"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadjike"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turke (cogne wårdiveuse «F»)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turke (cogne modiene «Q»)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucrainyinne"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Taprece des Etats Unis (moitès tapes)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamyinne QWERTY (roye des limerôs)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslave (latene)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Li tape AltGr"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Les deus tapes de Shift e minme tins"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control eyet Shift e minme tins"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Li tape CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Control eyet Alt e minme tins"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt eyet Shift e minme tins"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Li tape «Menu»"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Li tape «Windows» di hintche"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Li tape «Windows» di droete"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Betchfessîs montaedjes %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Bodjî les volumes lodjikes d' apreume\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"I gn a pupont d' sopoirt PCMCIA avou les naweas 2.2. Eployîz on nawea 2.4 "
-"s' i vs plait."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sori SUN"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Soris tipike PS2 a rôlete"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 boton"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Soris tipike a 2 botons"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Djenerike"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rôlete"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "séreye"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Soris tipike a 3 botons"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (séreye, vî sôrt C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "sori bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botons"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botons"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nouk"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nole sori"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Sayîz on pô vosse sori"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Po mete en alaedje li sori,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BODJÎZ L' RÔLETE!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Fini"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Shûvant ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Di dvant"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Totafwait va-t i comufåt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Si raloyî al rantoele daegnrece"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Li voye li pus simpe di s' adjonde avou l' adsl, c' est pppoe.\n"
-"Mins nerén, gn a des ôtes raloyaedjes ki s' siervèt fok di pptp ou dhcp.\n"
-"Si vos n' e savoz rén, tchoezixhoz «eployî pppoe»."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "eployî dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "eployî pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "eployî pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Ké client dhcp voloz-ve eployî?\n"
-"Li prémetou est «dhcpcd»"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nole cåte rantoele a stî detectêye so vosse sistinme.\n"
-"Dji n' pou nén apontyî cisse sôre di raloyaedje."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Tchoezixhoz l' eterface rantoele"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Tchoezixhoz kéne cåte rantoele vos vloz eployî po vos raloyî al rantoele "
-"daegnrece"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nole cåte rantoele di trovêye"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Apontiant li rantoele"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Intrez chal li no IP di voste éndjole (host name) si vos l' cnoxhoz.\n"
-"Sacwants sierveus DHCP ont mezåjhe do no po-z ovrer.\n"
-"Li no doet esse etir, metans: «mybox.mylab.myco.com».\n"
-"Vos poloz dner eto l' adresse IP del pasrele s' i gn en a ene."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "No do lodjoe"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Macrea d' apontiaedje del rantoele"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Cåte RDIS difoûtrinne"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Cåte RDIS divintrinne"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kéne sôre di raloyaedje RDIS avoz-ve?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Kén apontiaedje RDIS volez-ve?\n"
-"\n"
-"* Li vî apontiaedje eploye isdn4net. Il a des poûxhantès usteyes,\n"
-"  mins i pout esse on po deur a-z apontyî po on apurdisse,\n"
-"  et n' est nén foirt sitandård.\n"
-"\n"
-"* L' apontiaedje ledjir est pus åjhey a coprinde, pus standård,\n"
-"  mins avou moens d' usteyes.\n"
-"\n"
-"Nos vs ricomandans l' apontiaedje ledjir.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Novea apontiaedje (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Vî apontiaedje (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Apontiaedje pol RDIS"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Tchoezixhoz vosse ahesseu.\n"
-" S' i n' si trove nén el djîvêye, tchoezixhoz «Unlisted»"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocole po l' Europe"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocole po l' Europe (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocole po les ôtes payis"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocole po les ôtes payis \n"
-" nou canå D (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Ké protocole voloz-ve eployî?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kéne sôre di cåte avoz-ve?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Dji n' sai nén"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si vos avoz ene cåte ISA, les valixhances sol waitroûlêye ki shût dvreut\n"
-"esse les bones.\n"
-"\n"
-"Si vos avoz ene cåte PCMCIA, vos dvoz cnoxhe l' IRQ et I/R di vosse cåte.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Rinoncî"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuwer"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kéne est li cåte RDIS da vosse ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Dj' a trové ene cåte RDIS PCI, mins dji n' sai nén ké mineu eployî.\n"
-"Tchoezixhoz li bone cåte PCI dins l' djîvêye ki shût."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nole cåte RDIS PCI di trovêye. Tchoezixhoz ene dins l' djîvêye ki shût."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Tchoezixhoz li pôrt séreye ki vosse modem est raloyî dzo"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Tchûzes di houcaedje pa modem"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "No di raloyaedje"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Limerô di telefone"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Pa scripe"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Pa terminå"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "No di dominne"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prumî sierveu DNS (opcionel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Deuzinme sierveu DNS (opcionel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Vos ploz vos disraloyî oudobén rifé l' apontiaedje do raloyaedje."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Vos ploz rifé l' apontiaedje do raloyaedje."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Vos estoz raloyî al rantoele daegnrece pol moumint."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Vos ploz vos raloyî al rantoele daegnrece oudobén rifé l' apontiaedje do "
-"raloyaedje."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Vos n' estoz nén raloyî al rantoele daegnrece pol moumint."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Si raloyî"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Si disraloyî"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Apontyî li raloyaedje"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Apontiaedje & raloyaedje al rantoele daegnrece"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Asteure nos alans fé l' apontiaedje do raloyaedje %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Asteure nos alans fé l' apontiaedje do raloyaedje %s.\n"
-"\n"
-"\n"
-"Clitchîz so «I va» po continouwer."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Apontiaedje del Rantoele"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Come vos fjhoz l' astalaedje a pårti del rantoele, li rantoele est ddja "
-"apontieye.\n"
-"Clitchîz so «I va» po wårder l' apontiaedje da vosse, ou so  «Rinoncî» po "
-"rapontyî li raloyaedje al rantoele.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Wilicome å macrea d' apontiaedje del rantoele\n"
-"\n"
-"Dji va cmincî d' apontyî vosse raloyaedje al rantoele (daegnrece).\n"
-"Si vos n' vloz nén li deteccion otomatike, disclitchîz lu.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Tchoezixhoz li profil a-z apontyî"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Eployî li deteccion otomatike"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Dji deteke les éndjins..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Raloyaedje viè modem normå"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detecté sol pôrt %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Raloyaedje viè RDIS"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s detecté"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Raloyaedje ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detecté sol eterface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Raloyaedje viè cåbe TV"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Raloyaedje viè cåbe TV detecté"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Raloyaedje al rantoele locåle"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "cåte(s) rantoele detectêye(s)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Tchoezixhoz li raloyaedje ki vos voloz apontyî"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vos avoz apontyî diferinnes manires di s' raloyî al rantoele daegnrece.\n"
-"Tchoezixhoz li cene ki vos vloz eployî.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Raloyaedje al rantoele daegnrece"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Voloz-ve vos raloyî a tchaeke côp ki l' éndjole est enondêye?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Apontiaedje del rantoele"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Li rantoele a mezåjhe di esse renondêye"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Åk n' a nén stî tot renondant li rantoele: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Proficiat, l' apontiaedje del rantoele (locåle et daegnrece) est fini.\n"
-"\n"
-"L' apontiaedje va asteure esse metou en alaedje pol sistinme da vosse.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"On côp ki ci sreut fwait, nos vos rcomindans di renonder l' evironmint\n"
-"X11 da vosse po nén risker des rûjhes avou l' candjmint d' no di l' éndjole."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Åk n' a nén stî tins di l' apontiaedje.\n"
-"Sayîz voss raloyaedje avou «net_monitor» ou «mcc». Si vosse raloyaedje ni va "
-"nén, motoit k' vos dvrîz renonder l' apontiaedje"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ASTEME: Cist éndjin a ddja stî apontyî po esse raloyî al rantoele "
-"daegnrece.\n"
-"Clitchîz so «I va» po wårder cist apontiaedje la.\n"
-"Oudobén vos ploz candjî les tchamps chal pa dzeu po spotchî l' apontiaedje "
-"avou on novea."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Chal, intrez l' apontiaedje IP di voste éndjole.\n"
-"Totafwait doet esse sicrit come ene adresse IP, avou des\n"
-"ponts inte les limerôs (metans: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Apontiant l' éndjin di rantoele %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (mineu %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adresse IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maske rantoele"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Adresses IP otomatikes"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L' adresse IP doet esse del cogne 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Intrez chal li no IP di voste éndjole (host name).\n"
-"Li no doet esse etir, metans: «mybox.mylab.myco.com».\n"
-"Vos poloz dner eto l' adresse IP del pasrele s' i gn en a ene."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Sierveu DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Pasrele (eg %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Éndjin di pasrele"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Apontiaedje des proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-"Aler vey l' idéntifiant del cåte rantoele (ça pout siervi po les poirtåves)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Li proxy doet esse http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Li proxy doet esse ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Apontiaedje pol rantoele daegnrece"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voloz-ve sayî di vos raloyî al rantoele daegnrece asteure?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Dji saye vosse raloyaedje..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Li sistinme est raloyî al rantoele daegnrece."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Po des råjhons di såvrité, i va esse disraloyî tot d' shûte."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Li sistinme ni sonle nén esse raloyî al rantoele daegnrece.\n"
-"Sayîz di rapontyî li raloyaedje."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Apontiaedje do raloyaedje"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Rimplixhoz ou verifyîz les tchamps chal pa dzo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ del cåte"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Canå DMA del cåte"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "I/R del cåte"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "I/R del cåte (0)"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "I/R del cåte (1)"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Li limerô di telefone da vosse"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "No do ahesseu (eg: walonet.be)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Limerô di telefone do ahesseu"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1î DNS do ahesseu (opcionel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2inme DNS do ahesseu (opcionel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Tchoezixhoz vosse payis"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Môde di houcaedje"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Roedeu do raloyaedje"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Tårdjaedje (e seg) pol raloyaedje"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login do conte (no d' ûzeu)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Mot di passe do conte"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "li montaedje a fwait berwete: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Sitindowe pårticion nén sopoirtêye so cisse platfôme chal"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Vos avoz on trô dvins vosse tåve di pårtixhaedje, mins dji n' pout nén "
-"l' eployî.\n"
-"Li seule solucion c' est di bodjî vos mwaissès pårticions po-z aveur li trô "
-"a costé des pårticions stindowes"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Åk n' a nén stî come dji sayîve di rifé a pårti do fitchî %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Måva fitchî di copeye di såvrité"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Åk n' a nén stî come dji sayîve di scrire el fitchî %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Ene sacwè di mwais arive a vosse deure plake. \n"
-"Åk n' a nén stî tot sayant di verifyî l' etegrité des dnêyes. \n"
-"Çoula vout dire ki tot çu ki vos alez scrire el plake va fini come \n"
-"des crombès sacwès a l' astcheyance."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "k' i fåt d' tote foice avu"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "ki vént bén a pont"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "mo plaijhi a-z avu"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "plaijhi a-z avu"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ki vénreut co bén a pont"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Li novea sistinme di comon eprimaedje po Unix"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Ene amîdreye modêye do démon d' eprimaedje LPR"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Li vî démon d' eprimaedje di GNU/Linux"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Eprimer sins caweye"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Sicrirece locåle"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Sicrirece å lon"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Sicrirece sor on sierveu CUPS å lon"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Sicrirece sor on sierveu lpd å lon"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Sicrirece rantoele (TCP/soket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Sicrirece sor on sierveu SMB/Windows"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Sicrirece sor on sierveu NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Dinez on URI d' éndjin di scrirece"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Evoyî l' bouye a ene comande å traviè d' ene bûze"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modele nén cnoxhou"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Sicrireces locåles"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Sicrireces å lon"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " sol pôrt paralele \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", sicrirece USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", éndjin multi-fonccions sol pôrt paralele \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", éndjin USB multi-fonccions"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", éndjin multi-fonccions so ene sicrirece HP Jetdirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", éndjin multi-fonccions"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", ki rexhe so %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "sol sierveu LPD «%s», sicrirece «%s»"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", lodjoe TCP/IP «%s», pôrt %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "sol sierveu Windows «%s», pårtaedje «%s»"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "sol sierveu Novell «%s», sicrirece «%s»"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", tot-z eployant li cmande %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Eprimaedje direk (sins mineu)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(so %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(so ciste éndjole chal)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Sol sierveu CUPS «%s»"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Prémetou)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Tchoezixhoz li raloyaedje del sicrirece"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kimint li scrirece est ele raloyeye?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Po les scrireces d' on sierveu CUPS å lon i gn a nou mezåjhe dels\n"
-"apontyî chal: ele sront otomaticmint trovêyes."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Apontiaedje di CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Dinez l' no d' on sierveu CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Po pleur eployî des scrireces so des sierveus CUPS å lon di vosse rantoele "
-"locåle i gn a nén mezåjhe d' apontiaedje; les sierveus CUPS dijhèt "
-"otomaticmint a voste éndjole les scrireces k' il ont. Totes les scrireces "
-"kinoxhowes pa voste éndjole sont metowes el seccion «Sicrireces å lon» do "
-"mwaisse purnea di Printerdrake. Cwand vosse sierveu CUPS n' est nén sol "
-"rantoele locåle, vos dvoz dner si adresse IP et kécfeye si limero d' pôrt po "
-"prinde les informåcions so les scrireces do sierveu, ôtrumint leyîz ces "
-"intrêyes vûdes."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normålmint, CUPS est apontyî otomaticmint sorlon l' apontiaedje di\n"
-"rantoele da vosse, çu ki fwait ki vos ploz eployî les sierveus CUPS\n"
-"k' i gn a so vosse rantoele locåle. Si çoula n' va nén comufåt,\n"
-"disclitchîz «Apontiaedje otomatike di CUPS» eyet aspougnîz vosse\n"
-"fitchî /etc/cups/cupsd.conf al mwin. Ni rovyîz nén di renonder\n"
-"CUPS par après (avou l' comande: «service cups restart»)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L' adresse IP doet esse del cogne 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Li pôrt doet esse on limerô etir!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP do sierveu CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Pôrt"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Apontiaedje otomatike di CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Dji deteke les éndjins..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Sayî les pôrts"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Radjouter ene novele sicrirece"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Wilicom å macrea d' apontiaedje des scrireces\n"
-"\n"
-"Ci macrea chal vos permetrè d' astaler des scrireces locåles ou då lon po ls "
-"eployî a pårti di ciste éndjole chal et ossu d' ôtès éndjoles sol rantoele.\n"
-"\n"
-"I vos dmandrè totes les informåcions k' i fåt po-z apontyî les scrireces et "
-"vos denrè access a tos les mineus di scrirece k' i gn a, les tchûzes po les "
-"mineus, et les sôres di raloyaedje åzès scrireces."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Sicrirece locåle"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Wilicome å macrea d' apontiaedje des sicrireces\n"
-"\n"
-"Ci macrea chal vos aidrè a-z astaler li(les) scrirece(s) ki sont raloyeyes "
-"al copiutrece.\n"
-"\n"
-"Acertinoz vs ki les scrireces sont bén raloyeyes eyet en alaedje. Clitchîz "
-"so «Shûvant» cwand vs estoz presse, eyet so so «Rinoncî» si vos n' voloz nén "
-"apontyî les scrireces da vosse asteure.\n"
-"\n"
-"Notez ki des copiutreces k' i gn a polèt crasher tins del deteccion "
-"otomatike des scrireces, essoctez l' tchûze «Oto-deteccion des scrireces» di "
-"printerdrake po fé on astalaedje sins deteccion otomatike. Eployîz li «Môde "
-"sipepieus» di printerdrake si vos vloz apontyî ene sicrirece då lon ki "
-"n' aparet nén otomaticmint el djîvêye."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Oto-deteccion des scrireces"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Proficiat! Li scrirece da vosse est asteure astalêye eyet apontieye!\n"
-"\n"
-"Vos ploz eprimî avou li comande «Eprimî» di vos programes (normålmint elle "
-"est dizo l' menu «Fitchî»).\n"
-"\n"
-"Si vos vloz radjouter, bodjî ou candjî l' no d' ene sicrirece, ou si vos "
-"vloz candjî les prémetowès tchûzes (sôre di papî, cwålité del rexhowe,...), "
-"tchoezixhoz «Sicrirece» dins l' seccion «Éndjolreye» do cinte di contrôle di "
-"Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Oto-deteccion des scrireces"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake detecter otomaticmint por vos ene sicrirece locåle raloyeye sol "
-"pôrt paralele ou USB, mins prindoz astem ki so des sistinme k' i gn a çoula "
-"POUT EDJALER VOSSE SISTINME ET MINME AVEUR DES AROKES SOL DEURE PLAKE! Adon, "
-"fijhoz çoula a VOS PROPES RISSES!\n"
-"\n"
-"Voloz vs vormint continuwer l' oto-deteccion des scrireces?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Fé li deteccion otomatike"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Apontyî li scrirece al mwin"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s detecté"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Sicrirece sol pôrt paralele \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Sicrirece USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Nole sicrirece locåle di trovêye! Po-z end astaler manuwelmint ene dinoz on "
-"no d' éndjin sol roye d' intrêye (Les pôrts paraleles: /dev/lp0, /dev/"
-"lp1,..., corespondèt a LPT1:, LPT2:,..., Li 1re sicrirece USB: /dev/usb/lp0, "
-"li 2inme sicrirece USB: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Vos dvoz taper on no d' éndjin ou d' fitchî!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Nole sicrirece locåle di trovêye!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Les scrireces rantoele ni polèt esse astalêyes k' après l' astalåcion do "
-"sistinme. Tchoezixhoz «Éndjolreye» et pôy «Sicrireces» dins l' Cinte di "
-"contrôle di Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Po-z astaler des scrireces rantoele, clitchîz so «Rinoncî», eyet candjîz e "
-"mode «Sipepieus», adon clitchîz co ene feye so «Radjouter ene novele "
-"sicrirece»."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Li scrirece shûvante a stî detectêye otomaticmint, si c' est nén li cene ki "
-"vos vloz apontyî, dnez on no d' fitchî ou d' éndjin sol roye d' intrêye, "
-"s' i vs plait."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Vochal en djîvêye di totes les scrireces k' ont stî detectêyes otomaticmint. "
-"Tchoezixhoz li scrirece ki vos vloz apontyî oudonbén dnez on no d' fitchî ou "
-"d' éndjin sol roye d' intrêye, s' i vs plait."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Li scrirece ki shût a stî detectêye otomaticmint. Si apontiaedje srè fwait "
-"totafwaitmint otomaticmint. Si vosse sicrirece n' a nén stî detectêye "
-"comufåt, ou si vos inmez mî on apontiaedje diferin, metoz en alaedje "
-"«Apontiaedje manuel»."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Vochal ene djîvêye des scrireces k' ont stî detectêyes otomaticmint. "
-"Tchoezixhoz li cene ki vos vloz apontyî, s' ivs plait. Si apontiaedje srè "
-"fwait totafwaitmint otomaticmint. Si vosse sicrirece n' a nén stî detectêye "
-"comufåt, ou si vos inmez mî on apontiaedje diferin, metoz en alaedje "
-"«Apontiaedje manuel»."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Tchoezixhoz li pôrt ki vosse sicrirece est raloyeye oudonbén dnez on no "
-"d' fitchî ou d' éndjin sol roye d' intrêye, s' i vs plait."
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Tchoezixhoz li pôrt ki vosse sicrirece est raloyeye dzo."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Les pôrts paraleles: /dev/lp0, /dev/lp1,..., corespondèt a LPT1:, "
-"LPT2:,..., Li 1re sicrirece USB: /dev/usb/lp0, li 2inme sicrirece USB: /dev/"
-"usb/lp1,...) "
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Vos dvoz tchoezi/dner ene sicrirece/on éndjin!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Apontiaedje manuel"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Est çu ki vosse sicrirece est on éndjin multi-fonccions di HP (OfficeJet, "
-"PSC, PhotoSmart LaserJet 1100/1200/1220/3200/3300 avou ene sicannrece)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Astalant li pacaedje HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Verifiant l' éndjint eyet apontiant HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Astalant li pacaedje SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Dji louke vosse éndjin multi-fonccions HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Fijhant li pôrt del sicrirece disponibe po CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Lijhant les båzes di dnêyes des scrireces..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Tchûzes scrirece lpd å lon"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Po-z eployî ene sicrirece lpd å lon, vos dvoz dner li no di lodjoe do "
-"sierveu di scrireces eyet li no del sicrirece sol sierveu."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "No do lodjoe å lon"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "No del sicrirece å lon"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nou no pol lodjoe å lon!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nou no pol sicrirece å lon!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Tchûzes scrirece SMB/Windows"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Po rexhe avou ene sicrirece SMB, vos dvoz dner li no SMB do lodjoe (ki pout "
-"ni nén esse li minme ki si no di lodjoe TCP/IP) et motoit si adresse IP, di "
-"minme ki li no del pårteye scrirece ki vos vloz eployî, eyet les nos, mots "
-"di passe des ûzeus et informåcion des hopeas d' ovraedje k' i fåreut."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Lodjoe sierveu SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP do sierveu SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "No del pårteye"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Groupe d' ovraedje"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "I fåt dner li no do sierveu oudobén l' adresse IP do sierveu!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Nou no di pårtaedje samba!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Tchûzes scrirece NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Po rexhe avou ene sicrirece NetWare, vos dvoz diner li no NetWare do sierveu "
-"di scrireces (ki pout ni nén esse li minme ki si no di lodjoe TCP/IP) di "
-"minme ki li no del caweye del scrirece ki vos voloz eployî, eyet les nos et "
-"mots di passe des ûzeus k' i fåreut."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Sierveu di scrireces"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "No del caweye del scrirece"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Nou no d' sierveu NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nou no d' caweye NCP!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Tchûzes scrirece rantoele TCP/soket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Po-z eprimî avou ene scrirece soket, vos dvoz dner li no d' lodjoe del "
-"sicrirece, et motoit ossu li limerô do pôrt. So les sierveus HP JetDirect li "
-"pôrt est normålmint li 9100, so d' ôtes sierveus çoula pout candjî. Lijhoz "
-"li manuel di voste éndjolreye."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "No do lodjoe del scrirece"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nou no pol lodjoe del scrirece!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI di l' éndjin del scrirece"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Vos ploz mete directumint li hårdêye del sicrirece. Li hårdêye doet shure "
-"les specificåcions di CUPS ou di Foomatic. Notez ki totes les sôres di "
-"hårdêyes ni sont nén sopoirtêyes pa totes les caweyes di scrireces."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Ene hårdêye di valåbe doet esse dinêye!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Totes les scrireces divèt poirter on no (par egzimpe lp).\n"
-"Les tchamps di discrijhaedje ou di l' eplaeçmint polèt esse leyîs e blanc. "
-"C' est des rawetes po les ûzeus."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "No del sicrirece"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Discrijhaedje"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Eplaeçmint"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Dji prepare les båzes di dnêyes des scrireces..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Li modele di vosse sicrirece"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake a comparé li no do modele trové avou li deteccion otomatike "
-"avou li djîvêye des modeles di s' båze di dnêyes po vey li meyeuse "
-"corespondance. Cisse tchûze otomatike pout esse fåsse, sortot si vosse "
-"sicrirece ni s' trove nén el djîvêye. Verifyîz d' abord si l' tchûze est "
-"coreke, et clitchîz so «Li modele est corek» si c' est insi, oudonbén so "
-"«Tchoezi li modele al mwin» si vos vloz l' candjî.\n"
-"\n"
-"Po vosse sicrirece Printerdrake a trové:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Li modele est corek"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Tchozi li modele al mwin"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Tchûze do modele del sicrirece"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Ké modele di scrirece avoz-ve?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Verifyîz ki Printerdrake a fwait comufåt li deteccion \n"
-"otomatike do modele di vosse sicrirece, s' i vs plait.\n"
-"Cweroz après li modele corek el djîvêye si on måva \n"
-"modele a stî trové, ou si c' est «Eprimaedje direk» \n"
-"(çou ki vout dire ki nou mineu a stî trové)."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si vosse sicrirece n' est nén el djîvêye, tchoezixhoz ene copatibe (lijhoz "
-"li manuwel del sicrirece) ou ene ki rshonne li pus."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Apontiaedje del sicrirece OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Vos estoz po-z apontyî ene sicrirece OKI laser winprinter.\n"
-"Ces scrireces la eployèt on protocole di comunicåcion foirt sipeciål, çu ki "
-"fwait k' ele ni polèt roter comufåt ki raloyeyes å prumî pôrt paralele. "
-"Cwand li scrirece est raloyeye a on ôte pôrt ou raloyeye a on sierveu "
-"d' eprimaedje, i vos l' fåt mete sol prumî pôrt paralele divant d' poleur "
-"rexhe li pådje di saye. Ôtrumint ele ni rotrè nén. Li sôre di raloyaedje ki "
-"vos avoz dné ni srè nén prindou e conte pal mineu."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Apontiaedje del sicrirece Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Les mineus po les scrireces a djet d' intche k' ont stî dné pa Lexmark "
-"sopoirtèt seulmint les scrireces locåles, nén les scrireces å lon ou so des "
-"sierveus d' eprimaedje. I vos fåt l' mete so on pôrt locå oudobén l' apontyî "
-"sol éndjole wice k' ele est raloyeye."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Po vos poleur eprimer avou vosse Lexmark inkjet eyet cist apontiaedje chal, "
-"i vs fåt les mineus po les scrireces a djet d' intche di Lexmark Alez sol "
-"waibe http://www.lexmark.com et clitchîz sol boton «Drivers». Pôy, "
-"tchoezixhoz vosse modele, et «Linux» come sistinme d' operance. Les mineus "
-"vnèt come des pacaedjes RPM ou des scripes shell avou ene eterface "
-"d' astalaedje eteractive grafike. Vos n' avoz nén mezåjhe del apontyî avou "
-"ciste eterface grafike. Clitchîz so «Rinoncî» djusse après accepter "
-"l' licince, et pôy fjhoz rexhe les pådjes po mete e roye les tiesse "
-"d' eprimaedje avou «lexmarkmaintain» et coridjîz s' i fåt l' alignmint des "
-"tiesse d' eprimaedje avou ci programe la."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Apontiaedjes pol prémetowe sicrirece\n"
-"\n"
-"Acertinez vs kel grandeu do papî eyet li sôre d' intche ou l' môde "
-"d' eprimaedje (cwand on les pout tchoezi) sont-st apontyîs comufåt. Et ossu "
-"ki l' apontaiedje del éndjolreye po les scrireces lazer (memwere, baks "
-"duplecs, baks dirawete) est fwait comufåt. Notez k' avou ene grande finté ou "
-"cwålité pol rexhowe l' eprimaedje pout esse bén pus londjin."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Li tchûze %s doet esse on limerô etir!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Li tchûze %s doet esse on limerô!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Li tchûze %s est foû limites!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Voloz ve mete cisse sicrirece chal («%s»)\n"
-"come li prémetowe sicrirece?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Rexhe les pådjes di saye"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Tchoezixhoz les pådjes di saye ki vos vloz rexhe s' i vs plait.\n"
-"Note: li pådje pol saye del cwålité foto pout bén prinde on long moumint a "
-"rexhe del sicrirece, avou des scrireces lazer ki n' ont nén beacôp "
-"d' memwere, i s' pout minme kel pådje ni rexhe måy.\n"
-"Dins l' plupårt des cas c' est assez avou l' pådje di saye sitandård."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Nén rexhe les pådjes di saye"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Rexhe"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Pådje di saye standård"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Pådje di saye alternative (grandeu «letter»)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Pådje di saye alternative (grandeu A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Pådje di saye cwålité foto"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Èn nén rexhe di pådje di saye"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Dji rexhe li/les pådje(s) di saye..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Li ou les pådjes di saye ont stî evoyeyes al sicrirece.\n"
-"Ça pout prinde ene pitite hapêye divant ki li scrirece s' enonde.\n"
-"Avançmint:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Li ou les pådjes di saye ont stî evoyeyes al sicrirece.\n"
-"Ça pout prinde ene pitite hapêye divant ki li scrirece s' enonde.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Est-ce ki çoula rota comufåt?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Eprimaedje direk"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Po-z eprimer on fitchî a pårti del roye di comande (d' on purnea terminå) "
-"eployîz li comande «%s <fitchî>» oudobén ene usteye d' eprimaedje grafike: "
-"«xpp <fitchî>» ou «kprinter <fitchî>». Les usteyes grafikes permetèt di "
-"tchoezi li scrirece a rexhe avou et candjî åjheymint les tchûzes.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Vos ploz ossu eployî ces comandes la pol tchamp «Comande po rexhe» k' i gn a "
-"el purnea di dialogue pol eprimaedje di beacôp di programes, mins chal ni "
-"metoz nén li no di fitchî ca c' est l' programe kel dinrè.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Li comande «%s» permete ossu di candjî les tchûze po ene bouye d' eprimaedje "
-"dnêye. Tot simplumint radjoutez les tchûzes ki vos vloz el roye di comande, "
-"eg: «%s <fitchî>». "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Po-z aveur ene djîvêye des tchûzes k' i gn a pol sicrirece lijhoz li djîvêye "
-"chal pa dzo oudobén clitchîz sol boton «Djîvêye des tchûzes pol eprimaedje». "
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Vochal ene djîvêye des tchûzes k' i gn a pol sicrirece do moumint:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Po-z eprimer on fitchî a pårti del roye di comande (d' on purnea terminå) "
-"eployîz li comande «%s <fitchî>».\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Cisse comande vos l' poloz ossu eployî pol tchamp «Comande po rexhe» k' i gn "
-"a el purnea di dialogue pol eprimaedje di beacôp di programes, mins chal ni "
-"metoz nén li no di fitchî ca c' est l' programe kel dinrè.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Po-z aveur ene djîvêye des tchûzes k' i gn a pol sicrirece clitchîz sol "
-"boton «Djîvêye des tchûzes pol eprimaedje»."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Po-z eprimer on fitchî a pårti del roye di comande (d' on purnea terminå) "
-"eployîz li comande «%s <fitchî>» oudobén «%s <fitchî>».\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Vos ploz ossu eployî l' eterface grafike «xpdq» po defini des tchûzes et \n"
-"manaedjî les bouyes d' eprimaedje.\n"
-"Si vos eployîz KDE come sicribanne vos avoz on boton «panike», et ene "
-"imådjete sol sicribanne, avou l' tecse «DJOKER l' eprimaedje!», ki va djoker "
-"sol moumint totes les bouyes d' eprimaedje cwand vos l' clitchîz. Çouchal "
-"pout esse ahessåve si li scrirece a des problemes avou l' papî.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les comandes «%s» et «%s» permetèt ossu di candjî les tchûzes po ene bouye "
-"d' eprimaedje dnêye. Tot simplumint radjoutez les tchûzes ki vos vloz el "
-"roye di comande, eg: «%s <fitchî>».\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Clôre"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Eprimaedje/sicannaedje so «%s»"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Dji rexhe sol sicrirece «%s»"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Djîvêye des tchûzes pol eprimaedje"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"L' éndjin multi-fonccions HP da vosse a stî apontyî otomaticmint po pleur fé "
-"des scannaedjes. Asteure vos ploz scanner e roye di comande avou "
-"«scanimage» («scanimage -d hp:%s» si vos vloz specifyî li scannrece cwand "
-"vos nd avoz pus d' ene), oudonbén avou les eterfaces grafikes «xscanimage» "
-"ou «xsane». Si vos eplyîz li GIMP, vos ploz ossu scanner tot tchoezixhant li "
-"boune intrêye el menu «/Fitchî/Adcweri». Tapez ossu «man scanimage» eyet "
-"«man sane-hp» el roye di cmande si vos vloz pus di racsegnes.\n"
-"\n"
-"N' eployîz nén «scannerdrake» po cist éndjin chal!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"L' éndjin multi-fonccions HP da vosse a stî apontyî otomaticmint po pleur fé "
-"des scannaedjes. Asteure vos ploz scanner e roye di comande avou «ptal-hp %s "
-"scan ...». Li scannaedje avou ene eterface grafike ou a pårti do GIMP n' est "
-"nén co sopoirté po vost éndjin. Vos trovroz pus d' informåcion el fitchî «/"
-"usr/share/doc/hpoj-0.8/tal-hp-scan.html» sol deure plake da vosse. Si vos "
-"avoz ene LaserJet HP 1100 ou 1200 vos n' poloz scanner k' si vos avoz "
-"l' tchûze di scannaedje astalêye.\n"
-"\n"
-"N' eployîz nén «scannerdrake» po cist éndjin chal!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Lijhant les dnêyes del sicrirece..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transferer l' apontiaedje del sicrirece"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Vos ploz copyî l' apontiaedje del sicrirece ki vos avoz fwait pol caweye %s "
-"pol caweye %s, li cene en alaedje pol moumint. Totes les dnêyes "
-"d' apontiaedje (no del sicrirece, discrijhaedje, eplaeçmint, sôre di "
-"raloyaedje, eyet prémetowes tchûzes) vont esse sipotcheyes pa les cis ki vos "
-"copeyroz, mins les bouyes k' atindèt po rexhe ni vont nén esse candjeyes di "
-"caweye.\n"
-"Totes les caweyes ni polèt nén esse transferêyes di cisse manire påzès "
-"råjhons ki shûvèt:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ni sopoite nén les scrireces so des sierveus Novell nerén les cenes "
-"k' evoyèt les dnêyes so tot l' minme kéne comande.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ sopoite seulmint les scrireces locåles, les scrireces LPD å lon eyet les "
-"scrireces viè soket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD eyet LPRng ni sopoirtèt nén les scrireces IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Sol copete di tot çoula, les caweyes ki n' ont nén stî fwaites avou ci "
-"programe chal nerén avou «foomatic-configure» ni polèt nén esse transferêyes."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ossu, les scrireces apontieyes avou des fitchîs PPD dnés pal costrujheu "
-"oudobén avou les mineus CUPS d' oridjene ni polèt nén esse transferêyes "
-"nerén."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Noerixhoz les scrireces ki vos vloz transferer et clitchîz \n"
-"so «Transfer»."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Nén transferer les scrireces"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transfer"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"I gn a ddja ene scrirece lomêye «%s» so %s. \n"
-"Clitchîz so «Transfer» pol sipotchî.\n"
-"Vos ploz ossu dner on novea no, oudobén passer houte\n"
-"l' apontiaedje di cisse sicrirece chal."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Li no del scrirece doet aveur seulmint des letes, des chifes et li sine "
-"«sorlignî» (_)"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Li scrirece «%s» egzisteye ddja,\n"
-"voloz ve vormint spotchî si apontiaedje?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novea no del sicrirece"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfer di %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Vos avoz fwait on transfer di vosse vîye prémetowe sicrirece («%s»), El "
-"voloz ve mete ossu come prémetowe sicrirece pol novea sistinme d' eprimaedje "
-"%s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Rafristant les dnêyes del sicrirece..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Apontiaedje d' ene sicrirece å lon"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Dj' enonde li rantoele..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Apontyî li rantoele asteure"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Li sopoirt del rantoele n' a nén stî apontyî"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Vos alez apontyî ene sicrirece å lon. Çouchal a mezåjhe d' ene rantoele en "
-"alaedje, mins li vosse n' est nén co apontieye. Si vos continuwez sins "
-"rantoele vos n' poroz nén sayî li scrirece ki vos apontyîz pol moumint. Cwè "
-"volez ve fé?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Continouwer sins apontyî li rantoele"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"L' apontiaedje del rantoele k' a stî fwait tins di l' astalaedje ni pout nén "
-"esse enondé asteure. Acertinoz vs kel rantoele divént accessibe djusse après "
-"l' enondaedje, eyet coridjîz l' apontiaedje avou li cinte di contrôle di "
-"Mandrake, al seccion «Rantoele & Daegntoele»/«Raloyaedje», et après apontyîz "
-"li scrirece, todi avou l' cinte di contrôle di Mandrake, al seccion "
-"«Éndjolreye»/«Sicrirece»."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Li rantoele n' esteut nén en alaedje, et dj' a nén polou l' enonder. "
-"Verifyîz vost apontiaedje et voste éndjolreye. Et pôy sayîz cor on côp "
-"d' apontyî vosse sicrirece å lon."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Renondant li sistinme d' eprimaedje..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "hôte"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "couyon"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Astalaedje d' on sistinme d' eprimaedje e livea di såvrité «%s»"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Vos aloz astaler li sistinme d' eprimaedje %s so ene éndjole k' est avou "
-"l' livea di såvrité «%s».\n"
-"\n"
-"Ci sistinme d' eprimaedje chal enonde on démon (ene bouye di fond) ki ratind "
-"après les bouyes d' eprimaedje et les manaedje. Ci démon chal pout eto esse "
-"raloyî pa des éndjoles då lons sol rantoele, dj' ô bén ça pout esse on pont "
-"possibe po les hacneus fé des atakes. Po cisse råjhon la seulment kékes "
-"démons sont-st enondés dins ci livea di såvrité chal avou l' apontiaedje "
-"prémetou.\n"
-"\n"
-"Voloz vs vormint apontyî l' eprimaedje so ciste éndjole chal?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Enonder li sistinme d' eprimaedje a l' enondaedje del éndjole"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Li sistinme d' eprimaedje (%s) ni srè nén enonder otomaticmint cwand "
-"l' éndjole s' enondrè.\n"
-"\n"
-"C' est possibe ki l' enondaedje otomatike fuxhe essocté paski l' livea di "
-"såvrité a stî ragrandi, ca l' sistinme d' eprimaedje e-st on pont possibe "
-"d' atakes po les hacneus.\n"
-"\n"
-"Voloz vs rimete en alaedje l' enondaedje otomatike do sistinme d' eprimaedje?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Cwerant après les astalés programes..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Dji bodje LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Dji bodje LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Tchoezixhoz li caweye di scrirece"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ké sistinme d' eprimaedje (sôre di caweyaedje) voloz-ve eployî?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Apontiant li scrirece «%s»..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Astalant Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Tchûzes pol scrirece"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Dji prepare PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Apontiant les programes..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Voloz-ve apontyî l' eprimaedje?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistinme d' eprimaedje: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Les scrireces shûvantes sont-st apontieyes. Dobe-clitchîz so ene di zeles "
-"pol candjî, pol mete come prémetowe sicrirece, po-z aveur des informåcions "
-"dso; ou po fé k' ene sicrirece so on sierveu CUPS å lon seuye veyåve pa Star/"
-"Open Office."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Les scrireces shûvantes sont-st apontieyes. Dobe-clitchîz so ene di zeles "
-"pol candjî, pol mete come prémetowe sicrirece, ou po-z aveur des "
-"informåcions dso."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Rafrister li djîvêye des scrireces (po-z aveur veyåves totes les scrireces "
-"CUPS å lon)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Candjî li sistinme d' eprimaedje"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Môde normå"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Voloz ve apontyî ene ôte sicrirece?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Candjî l' apontiaedje del sicrirece"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Sicrirece %s\n"
-"Cwè voloz vs candjî avou cisse sicrirece chal?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "El fé!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Sôre di raloyaedje del sicrirece"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "No, discrijhaedje, eplaeçmint del sicrirece"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Vindeu, modele, mineu del sicrirece"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Vindeu, modele del sicrirece"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Mete cisse sicrirece come prémetowe sicrirece"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Radjouter cisse sicrirece chal po Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Bodjî cisse sicrirece chal po Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Rexhe les pådjes di saye"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Saveur kimint rexhe so cisse sicrirece chal"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Bodjî ene sicrirece"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Dji bodje li vîye scrirece «%s»..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Prémetowe sicrirece"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Li scrirece «%s» a stî metowe come prémetowe sicrirece."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Radjoutaedje d' ene sicrirece po Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Li scrirece «%s» a stî radjoutêye po Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Li radjoutaedje del sicrirece «%s» po Star Office/OpenOffice.org a fwait "
-"berwete."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Bodjaedje d' ene sicrirece po Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Li scrirece «%s» a stî bodjeye po Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Li bodjaedje del sicrirece «%s» po Star Office/OpenOffice.org a fwait "
-"berwete."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voloz-ve vormint bodjî foû li scrirece «%s»?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Dji bodje li scrirece «%s»..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Apontiaedje des proxies"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bénvnowe sol usteye d' apontiaedje des proxies.\n"
-"\n"
-"Chal, vos pôroz apontyî vos proxies http eyet ftp\n"
-"avou ou sins no d' ûzeu ou sicret\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Rimplixhoz avou les informåcions pol proxy http s' i vs plait\n"
-"Leyîz e blanc si vos n' volez nén on proxy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "Hårdêye"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "pôrt"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Li hårdêye doet cmincî avou «http:»"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Li pôrt doet esse on limerô"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Rimplixhoz avou les informåcions pol proxy ftp s' i vs plait\n"
-"Leyîz e blanc si vos n' volez nén on proxy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Li hårdêye doet cmincî avou «ftp:»"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Dinez l' no d' ûzeu et li scret, s' i gn a onk.\n"
-"Leyîz e blanc si vos n' volez nén eployî di no d' ûzeu/di scret"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "no d' ûzeu"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "sicret"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "tapez li scret cor on côp"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Les screts ni sont nén les minmes. Sayîz co ene feye!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Dji n' pout radjouter ene pårticion a on RAID _abwesné_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Dji n' pout scrire li fitchî %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid n' a nén stî"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid n' a nén stî (motoit vos n' avoz nén les raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "I gn a nén des pårticions assez pol livea RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Enonder li sistinme di son ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron manaedje des comandes a enonder periodicmint.\n"
-"I ravize a «cron» mins po des sistinmes ki n' sont nén en alaedje\n"
-"24e/24e. Anacron si tchedje di s' mete a djoû et d' enonder les tårdjowès\n"
-"comandes cwand l' éndjole est enondêye."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd sieve a shure l' etat del batreye et a scrire les racsegnmints avou "
-"syslog.\n"
-"I pout eto siervi a clôre l' éndjole cwand c' est ki les batreyes divnèt "
-"flåwes."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Enonde les cmandes metowes avou li cmande at å moumint defini avou li cmande "
-"at.\n"
-"Sieve eto a enonder des cmandes batch cwand c' est ki l' éndjole n' a nén\n"
-"trop d' ovraedje so les bresses."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron est on programe sitandård po Unix.  Il enonde des programes tchoezis\n"
-"pa l' ûzeu a des moumints metous pa l' ûzeu.  Li cron da Vixie radjoute "
-"sacwants\n"
-"siervice å programe cron tradicionél di Unix, par egzimpe ene meyeuse "
-"såvrité\n"
-"eyet des pus ritchès tchûzes po l' apontiaedje."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Avou GPM vos avoz li sopoirt del sori po les programes Linux e mode tecse,\n"
-"come li «comandeu di meynute» (Midnight Commander, mc). Et vos avoz eto\n"
-"li sopoirt po côper et d' plaker sol conzôle, et sopoirt po des menus\n"
-"pop-up sol conzôle."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake fwait ene deteccion del éndjolreye, et pout ossu apontyî\n"
-"les noveas/candjîs éndjins."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache est on sierveu HTTP. Il est eployî po siervi des pådjes waibe et des "
-"CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Li démon Internet (inetd) est on «super-sierveu» k' enonde ene drigleye\n"
-"d' ôtes siervices k' ont a vey avou Internet cwand c' est k' i gn a "
-"mezåjhe.\n"
-"Metans: telnet, ftp, rsh eyet login.  Si vos n' purdoz nén inetd, nouk di "
-"ces\n"
-"siervices la ni såreut esse enondé."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Enonde ene passete po les pakets rantoele, pol séreye di naweas Linux 2.2,\n"
-"vos end avoz mezåjhe po mete so pîs on côpe feu po mete voste éndjole\n"
-"a hipe des atakes des hacneus."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ci pacaedje chal tchedje li taprece tchoezeye e /etc/sysconfig/keyboard.\n"
-"Çoula pout esse apontyî avou l' usteye kbdconfig.\n"
-"Vos l' dvoz leyî en alaedje pol plupårt des éndjoles."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Fé otomaticmint des noveles tiestîres do nawea dins /boot\n"
-"a pårti di /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Deteccion et apontiaedje otomatikes del éndjolreye a l' enondaedje."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Pa côps linuxconf va fé totès sôres di bouyes å moumint di\n"
-"l' enondaedje po wårder l' apontiaedje do sistinme."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd est li démon d' eprimaedje k' i gn en a mezåjhe po lpr poleur rexhe "
-"comufåt.\n"
-"C' est on sierveu ki manaedje les bouyes po les scrireces."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Li forveyou sierveu Linux, eployî po fé on sierveu di hôte performance\n"
-"et di hôte disponibilité (high-availability)."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) est on sierveu di nos d' dominne (DNS) eployî po-z aveur les "
-"adresses IP limerikes a pårti des nos des lodjoes."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monte et dismonte les ponts di montaedje po Network File System (NFS), \n"
-"SMB (Lan Manager/Windows) et NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Enonde ou aresteye totes les eterfaces di rantoele apontieyes po\n"
-"s' mete en alaedje cwand c' est ki l' éndjole s' enonde."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS est on protocole populaire po pårti des fitchîs so les rantoeles TCP/"
-"IP.\n"
-"Ci siervice chal c' est po-z aveur on sierveu NFS, ki est apontyî\n"
-"viè l' fitchî /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS est on protocole populaire po pårti des fitchîs so les rantoeles TCP/"
-"IP.\n"
-"Ci siervice chal c' est po-z aveur li foncsionalité di blocaedje\n"
-"di fitchîs pa NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Mete otomaticmint en alaedje li coine des tapes limerikes del taprece\n"
-"a l' enondaedje; ossu bén so X11 k' e conzôle."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Sopoirt po les scrireces OKI 4w et copatibes."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Li sopoirt PCMCIA c' est po sopoirter des sacwès come des cåtes rantoele\n"
-"ou des modems, avou les poirtåvès copiutreces. I n' srè nén enondé a moens\n"
-"di esse apontyî, adon c' est nén måva del leyî astalé minme so les éndjoles\n"
-"wice k' on n' s' e siervèt nén."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Li mapeu d' pôrts manaedje les raloyaedjes RPC, ki sont-st eployîs pa\n"
-"des protocoles come NFS ou NIS. Li sierveu portmap doet esse en alaedje\n"
-"so les éndjoles ki dvèt esse des sierveus po des protocoles ki s' e siervèt "
-"do RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix est ene usteye ki fwait voyaedjî les emiles d' ene éndjole a l' ôte."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Schaper et rprinde l' éntropeye do sistinme, po-z aveur ene askepiance\n"
-"di nombes aleatoires di meyeuse cwålité."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assinaedje di peur éndjins (raw devices) po les éndjins di sôre blok (come\n"
-"les pårticions des deures plakes), po des programas come Oracle s' endè "
-"siervi"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Li démon routed c' est po-z aveur li tåvlea di routaedje IP esse metou a "
-"djoû\n"
-"otomaticmint viè l' protocole RIP. Li protocole RIP est bråmint eployî avou\n"
-"les ptitès rantoeles, mins des pus complesses rantoeles ont mezåjhe di pus "
-"complesses protocoles."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Li protocole rstat c' est po les ûzeus k' i gn a sor ene rantoele poleur\n"
-"vey des informåcions sol performance d' ene éndjole del rantoele."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Li protocole rusers c' est po les ûzeus k' i gn a sor ene rantoele poleur\n"
-"idéntifyî kî est raloyî so des ôtès éndjoles."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Li protocole rwho c' est po des lodjoes å lon poleur vey ene djîvêye\n"
-"di tos les ûzeus ki sont raloyîs sol éndjole, si l' démon rwho est\n"
-"astalé eyet en alaedje (çoula ravize a finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Enonder li sistinme di son so voste éndjole"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog est ene usteye ki schoûte les diferins démons ki lî evoyèt\n"
-"des messaedjes di log po mete dvins les fitchîs di log do sistinme.\n"
-"C' est ene bone idêye di l' aveur todi en alaedje."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Tcherdjî les mineus po vos éndjins USB."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Enonder li sierveu d' fontes å moumint di l' enondaedje\n"
-"(çoula est obligatwere si vos vloz eployî XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Tchoezixhoz kés siervices dvèt esse enondés a l' enondaedje do sistinme"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Eprimaedje"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Rantoele"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Pårtaedje di fitchîs"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistinme"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Administråcion då lon"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Sierveu di båze di dnêyes"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Siervices: %d en alaedje po %d eredjistrés"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Siervices"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "en alaedje"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "djoké"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Siervices et démons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Mande escuzes, mins dj' a pont d' ôtès\n"
-"informåcions so ci siervice chal."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "A l' enondaedje"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Enonder"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Arester"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Gråces di tchoezi Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Wilicome amon les libes programes"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Li succès di MandrakeSoft est costrut sol principe des libes programes. "
-"Vosse novea sistinme d' operance est li rzultat d' on ovraedje e cmon del "
-"pårt del daegnrece cominålté Linux"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Ridjondoz li monde des libes programes"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Voloz vs aprinde di pus sol cominålté Open Source eyet des libes programes? "
-"Po pårtaedjî vos cnoxhances eyet aidî a fé des clapantès usteyes, abounez vs "
-"ås foroms di copinaedjes ki vos trovroz dins nos pådjes waibe «Comunity»"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Daegntoele et messaedjes"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vs dene li meyeuse dressêye di programes po-z aveur accès "
-"a tot çu k' i gn a sol daegntoele. Naivyîz so les pådjes waibe et vey les "
-"animåcions avou Mozilla ou Konqueror, lejhoz vos emiles eyet manaedjîz les "
-"informåcions da vosse avou Evolution et Kmail, et co des ôtes"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia et grafikes"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vs lai eployî vosse copiutrece multimedia disk' a ses "
-"dierinnès limites! Eployîs les dierins programes po djower des fitchîs di "
-"son, aspougnî eyet håyner vos imådjes ou fotos, et djower des films"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Programaedje"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 est ene clapante platfôme di programaedje. Eployîz tote "
-"li pouxhance do copileu GNU gcc eyet les meyeus evironmints di diswalpaedje "
-"e libe programes"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Cinte di contrôle di Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 a ene pouxhante usteye po ttafwaitmint apontyî et mete a "
-"vosse mode voste éndjole"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Eterfaces ûzeu"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 vént avou 11 evironmints di scribanne et manaedjeus di "
-"purneas diferins po vos tchoezi: GNOME 1.4, KDE 2.2.2, Window Maker 0.8, et "
-"hay vos nd åroz..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Programes sierveus"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Fé di voste éndjole on pouxhant sierveu e seulmint sacwants clitchs di vosse "
-"sori: sierveus waibe, d' emilaedje, côpe feu, routeu, di fitchîs et "
-"d' eprimaedje,..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Djeus"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 vs dene les meyeus djeus k' i gn a e libe programes - "
-"djeus d' arcåde, d' accion, di stratedjeye, cwårdjeus..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Po d' ôtès informåcions so les Siervices Profesionels da MandrakeSoft, eyet "
-"les propozucions comerciåles, waitîz l' pådje waibe shûvante:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Astalant les pacaedjes..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Dji n' parvén nén a lére li tåve di pårtixhaedje: ele est trop\n"
-"crombe por mi :( Dji m' va sayî di disfacer les mwaijhès pårticions."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Aroke!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Dji n' sai trover li fitchî imådje «%s» k' i gn a mezåjhe."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Apontieu di l' astalaedje otomatike"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Apontiaedje des étapes otomatikes"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"S' i vs plait, tchoezixhoz po tchaeke étape s' i l' fåt rifé come vos "
-"l' avoz fwait po voste astalaedje, ou s' i l' fåt fé manuwelmint"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Bénvnowe.\n"
-"\n"
-"Les parametes del astalaedje otomatike sont ezès seccions sol hintche"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Complumints!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Li plakete a stî fwaite comufåt.\n"
-"Vos ploz asteure rifé on astalaedje avou."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Astalaedje otomatike"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Radjouter on cayet"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Bodjî li dierin cayet"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      Rapoirt di DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      Rapoirt do démon DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    Détays do rapoirt di DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Copeye di såvrité des fitchîs sistinme..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Fitchîs di copeye di såvrité sol deure plake..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Copeye di såvrité des fitchîs des ûzeus..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Copeye di såvrité d' ôtes fitchîs..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Åk n' a nén stî tot-z evoyant on emile. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Tchoezi les fitchîs"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-"Tchoezixhoz les fitchîs et les ridants a radjouter, et clitchîz so "
-"«Radjouter»"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Verifyîz totes les tchûzes ki vos avoz mezåjhe, s' i vs plait.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Copeye di såvrité di vos fitchîs sistinme. ( ridant /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Tchoezixhoz les ûzeus ki vos vloz inclure dins l' copeye di såvrité."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Èn nén inclure li muchete do betchteu"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Bodjî les tchoezis"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Ûzeus"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Eployî raloyaedje FTP pol copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "dinez l' no do lodjoe ou l' adresse IP, s' i vs plait."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Sayîz co ene feye"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Dinez vosse sicret s' i vs plait"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Rimimbrez vs di ci scret chal"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Raloyaedje FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Raloyaedje di såvrité"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Eployî CD/DVDROM pol copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Tchoezixhoz li sôre di vosse taprece."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Clitchîz so on sopoirt s' i vs plait"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Tchoezixhoz les pacaedjes ki vos voloz astaler"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Dinez li no del éndjin graveu di plakes lazer\n"
-" eg: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Eployî ene binde pol copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:1156
-#, fuzzy
-msgid "Please enter the device name to use for backup"
-msgstr "dinez l' no do lodjoe eyet l' adresse IP, s' i vs plait."
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "dinez l' no do lodjoe eyet l' adresse IP, s' i vs plait."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Måva fitchî di copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Rantoele"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Deure plake / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "totes les eures"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "tos les djoûs"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "totes les samwinnes"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "tos les moes"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Eployî démon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Tchoezixhoz li tins inte deus\n"
-"fijhaedjes di copeyes di såvrité"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Tchoezixhoz li sopoirt ki les\n"
-"copeyes di såvrité vont î esse copieyes."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Trover les deurès plakes"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Eployî FTP avou l' démon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Cwè"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Wice"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Cwand"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "D' ôtès tchûzes"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Apontiaedje di Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Tchoezixhoz les pacaedjes ki vos voloz astaler"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "sol deure plake"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "å dtruviè del rantoele"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Tchoezixhoz les pacaedjes ki vos voloz astaler"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Sistinmes di fitchîs"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sourdant pol copeye di såvrité: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Fitchîs sistinme:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Fitchîs des ûzeus:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ôtes fitchîs:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Tchûzes:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Deure plake.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Tchoezixhoz li pôrt séreye ki vosse modem est raloyî dzo"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid "         Restore Configuration       "
-msgstr "Apontiaedje del Rantoele"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Måva fitchî di copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Tchoezixhoz li sôre di vosse sori."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr " Eployî li deure plake po les copeyes di såvrité"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Tchoezixhoz li sôre di vosse sori."
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Ôtes sopoirts"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Astaler sistinme"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "A vosse môde"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Aidance"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Di dvant"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Schaper"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Måva fitchî di copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "A vosse môde"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Shûvant"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Djîvêye di pacaedjes a-z astaler"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Tchoezixhoz li lingaedje a eployî."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr ""
-"Tchoezixhoz li sopoirt ki les\n"
-"copeyes di såvrité vont î esse copieyes."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr ""
-"Tchoezixhoz li sopoirt ki les\n"
-"copeyes di såvrité vont î esse copieyes."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Måva fitchî di copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Måva fitchî di copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Måva fitchî di copeye di såvrité"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Dj' evoye les fitchîs..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "dinez l' no do lodjoe eyet l' adresse IP, s' i vs plait."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Tchoezixhoz les pacaedjes ki vos voloz astaler"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Apontiaedje del Rantoele"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Apontiaedje del Rantoele"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Apontiaedje do macrea"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Spipepieus apontiaedje"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Sistinmes di fitchîs"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright © 2001 MandrakeSoft, sicrit pa DUPONT Sébastien <dupont_s\\@epita."
-"fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Çouchal, c' est on libe programe; vos l' poloz bén spåde et vos l' poloz\n"
-"bén candjî tot shûvant li Licinse Publike Djeneråle (GPL) di GNU eplaideye\n"
-"pal Free Software Foundation; ça pout esse li 2e modêye del licinse ou\n"
-"(si vos inmez mî) ene pus noûve.\n"
-"\n"
-"Li programe est spårdou avou l' espwer k' i serè ahessåve,\n"
-"mins SINS NOLE WAERANTEYE; dji n' waeranti nén minme ki vos VINDRÎZ\n"
-"bén li programe ou ki vos vs È SIEVRÎZ BÉN PO ENE SÔRE OU L' ÔTE.\n"
-"Waitîz li Licinse Publike Djeneråle (GPL) di GNU po vey les pondants\n"
-"eyet les djondants.\n"
-"\n"
-"Avou ci programe ci, vos dvrîz aveur rshût ene copeye del Licinse Publike\n"
-"Djeneråle (GPL) di GNU; si vos n' l' avoz nén avou, sicrijhoz al\n"
-"    Free SoftWare Foundation, Inc.,\n"
-"    59 Temple Place - Suite 330,\n"
-"    Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Åk n' a nén stî e l' astalaedje di %s. Vochal l' aroke:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Cweri les fontes astalêyes"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Distchoezi les fontes astalêyes"
-
-#: ../../standalone/drakfont_.c:252
-#, fuzzy
-msgid "parse all fonts"
-msgstr "Cweri les fontes astalêyes"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nole fonte di trovêye"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "fwait"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "dji n' a trové nole fonte so vos montêyès pårticions"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ritchoezi les fontes corekes"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "dji n' a trové nole fonte.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Cweri el djîvêye des fontes astalêyes"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copiaedje des fontes"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Astalaedje des fontes True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "tårdjîz s' i vs plait, dj' enonde ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Astalaedje des fontes True Type fwait"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Covertixhaedje des fontes"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "enondaedje di type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Fijhaedje di referinces po Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "covertixhaedje des fontes ttf"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "covertixhaedje des fontes pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Bodjî les fitchîs timporaires"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Renonder XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Bodjî les fitchîs di fontes"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "renondaedje di xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Avant d' astaler ene fonte, asseurez vs ki vos avoz l' droet di l' eployî et "
-"di l' astaler sol sistinme da vosse.\n"
-"\n"
-"- Vos ploz astaler les fontes del manire normåle. Dins des råres cas, des "
-"crombès fontes polèt crasher vosse sierveu X."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Abagaedje di fontes"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Prinde les fontes di Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Disastaler les fontes"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Sipepieusès tchûzes"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Djîvêye des fontes"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Tchoezixhoz li programe ki va-st eployî les fontes:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Sicrireces djenerikes"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Tchoezixhoz li fitchî d' fonte ou l' ridant a radjouter, et clitchîz so "
-"«Radjouter»"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Djîvêye a-z astaler"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "clitchîz chal si vs estoz seur."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "chal ôtrumint."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Distchoezi tot"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Tchoezi tot"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Djîvêye a bodjî"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Messaedje d' enondaedje"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copyî les fontes so vosse sistinme"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Astaler & converti les fontes"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-astalaedje"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Bodjî les fontes foû di vosse sistinme"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-disastalaedje"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Pårtaedje do raloyaedje al rantoele daegnrece"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Li pårtaedje do raloyaedje al rantoele daegnrece est en alaedje"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"L' apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece a ddja stî "
-"fwait.\n"
-"Il est en alaedje pol moumint.\n"
-"\n"
-"Cwè voloz-ve fé?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "dismete"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "passer houte"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rapontyî"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Dismetant les sierveus..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Asteure li pårtaedje do raloyaedje al rantoele daegnrece est dismetou."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Li pårtaedje do raloyaedje al rantoele daegnrece est dismetou."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"L' apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece a ddja stî "
-"fwait.\n"
-"Il est pol moumint dismetou.\n"
-"\n"
-"Cwè voloz-ve fé?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "mete en alaedje"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Metant les sierveus en alaedje..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr ""
-"Asteure li pårtaedje do raloyaedje al rantoele daegnrece est en alaedje."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Vos alez apontyî li copiutrece da vosse po pårti li raloyaedje al rantoele "
-"daegnrece.\n"
-"Avou çoula, les ôtès copiutreces di vosse rantoele locåle si polèt raloyî\n"
-"al rantoele daegnrece å dtraviè del cene da vosse.\n"
-"\n"
-"Note: vos åroz mezåjhe d' ene cåte rantoele po vosse rantoele locåle (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Eterface %s (ki eploye li module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Eterface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nole cåte rantoele so voste éndjole!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nole cåte rantoele a stî detectêye so vosse sistinme.\n"
-"Eployîz l' usteye d' apontiaedje del éndjolreye s' i vs plait."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Eterface rantoele"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"I gn a seulmint ene cåte rantoele d' apontieye so vosse sistinme:\n"
-"\n"
-"%s\n"
-"\n"
-"Dji va-z apontyî vosse rantoele locåle avou cisse cåte la."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Tchoezixhoz kéne cåte rantoele va esse raloyeye a vosse rantoele locåle"
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "L' eterface rantoele est ddja apontieye"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Asteme, li cåte rantoele (%s) est ddja apontieye.\n"
-"\n"
-"Voloz vs rifé on rapontiaedje otomatike?\n"
-"\n"
-"Vos l' poloz fé manuwelmint mins vos dvoz saveur çou k' vos fjhoz."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Rapontiaedje otomatike"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Mostrer l' apontiaedje do moumint del eterface"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Apontiaedje do moumint di «%s»:\n"
-"\n"
-"Rantoele: %s\n"
-"Adresse IP: %s\n"
-"Atribucion IP: %s\n"
-"Mineu: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Rantoele locåle di classe C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP do sierveu DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Rapontyî l' eterface et li sierveu DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"I pout î aveur on conflit d' adresses pol rantoele locåle\n"
-"avou l' apontiaedje do moumint po %s !\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Dj' a detecté l' apontiaedje d' on côpe feu!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Asteme! Dj' a detecté on côpe feu ddja apontyî. I vos fåreut motoit on po "
-"d' apontiaedje manuwel après l' astalåcion."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Apontiant..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Apontiant les scripes, astalant les programes, enondant les sierveus..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Åk n' a nén stî cwand dj' astaléve li pacaedje %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Totafwait a stî apontyî.\n"
-"Vos ploz asteure pårti li raloyaedje al rantoele daegnrece avou d' ôtes "
-"copiutreces di vosse rantoele locåle, tot eployant l' apontiaedje otomatike "
-"des éndjoles (avou DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "L' apontiaedje a ddja stî fwait. Mins il est pol moumint dismetou."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "L' apontiaedje a ddja stî fwait. Et il est en alaedje pol moumint."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Li pårtaedje do raloyaedje al rantoele daegnrece n' a måy stî apontyî."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Apontiaedje do pårtaedje do raloyaedje al rantoele daegnrece"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Wilicome al usteye d' apontiaedje do pårtaedje do raloyaedje al rantoele "
-"daegnrece!\n"
-"\n"
-"%s\n"
-"\n"
-"Clitchîz so «Apontyî» si vos vloz enonder li macrea d' apontiaedje."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Apontiaedje del rantoele (%d adaptoes)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Disfacer profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil a disfacer:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novea profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"No do profil a fé (li novea profil va esse ene copeye di ci do moumint avou "
-"on novea no):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "No do lodjoe: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Accès al rantoele daegnrece"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Sôre:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasrele:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Eterface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Sitatut:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Tårdjîz on pô s' i vs plait."
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Apontyî li raloyaedje al rantoele daegnrece..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Apontiaedje del rantoele locåle"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Mineu"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Eterface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocole"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Sitatut"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Apontyî li rantoele locåle..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Clitchîz chal po-z enonder l' macrea ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Macrea..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Mete en oûve"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Tårdjîz s' i vs plait, dji mete en alaedje l' apontiaedje"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Raloyî"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nén raloyî"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Si raloyî..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Si disraloyî..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vos n' avoz nole eterface d' apontieye.\n"
-"I vos fåt end apontyî ene, clitchîz so «Apontyî»"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Apontiaedje del rantoele locåle"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptoe %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocole d' enondaedje"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "En alaedje a l' enondaedje"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "mete en alaedje asteure"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "essocter asteure"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Ciste eterface n' a nén co stî apontieye.\n"
-"Enondez li macrea d' apontiaedje a pårti do mwaisse purnea"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vos n' avoz nou raloyaedje al rantoele daegnrece.\n"
-"Po endè fé onk clitchîz so «Apontyî»"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Apontiaedje do raloyaedje al rantoele daegnrece"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Apontiaedje do raloyaedje al rantoele daegnrece"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Sôre di raloyaedje: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametes"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasrele"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Cåte rantoele"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Dji mete li livea di såvrité"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Cinte di contrôle"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Tchoezixhoz l' usteye ki vos voloz eployî"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cåbe-TV)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (pa waches)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (cåbe-TV)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cåbe-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Chine (pa waches)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Djapon (pa waches)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Djapon (cåbe-TV)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europe ponantrece"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlande"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europe coûtchantrece"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Ostraleye"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Noûve-Zelande"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Nonne Afrike"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Årdjintene"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"S' i vs plait,\n"
-"dinez l' nôrme di vosse TV eyet vosse payis"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Nôrme TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Redjon:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Li cweraedje des canås TV e-st en alaedje ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Cweraedje des canås TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Nole cåte tévé di detectêye!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Nole cåte tévé a stî detectêye so voste éndjole. Acertinoz vs k' ene cåte "
-"videyo/tévé ricnoxhowe pa Linux est bén raloyeye al copiutrece.\n"
-"\n"
-"Vos ploz viziter nosse båze di dnêyes del sopoirtêye éndjolreye so:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "Po s' e siervi: keyboarddrake [--expert] [taprece]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Tchoezixhoz li sôre di vosse taprece."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Volez-ve kel tape «BackSpace» evoye on «Delete» el conzôle?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Candjî di plake lazer"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Metoz li CDROM d' astalåcion dvins l' lijheu, s' i vs plait;\n"
-"et clitchîz so «I va» on côp ki c' est fwait.\n"
-"Si vos n' l' avoz nén, clitchîz so «Rinoncî» po passer hute li metaedje a "
-"djoû."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Dji n' sai enonder li vicant metaedje a djoû !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Li candjmint a stî fwait, mins i vs fåt moussî foû et rvini e session po "
-"k' i prindaxhe efet"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Mostrer seulmint pol djoû tchoezi"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fitchî/_Novea"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fitchî/_Drovî"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fitchî/_Schaper"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fitchî/Schaper et r_lomer"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fitchî/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Tchûzes"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Tchûzes/Saye"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Aidance"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Aidance/Å _dfait..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Ûzeu"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messaedjes"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Esplicaedjes des usteyes di Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "cweri"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ene usteye po vey vos fitchîs d' log"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Apontiaedjes"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "avou"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mins nerén sins"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Tchoezixhoz on fitchî"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calindrî"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Håynaedje do fitchî"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Abranle pa emile/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "tårdjîz s' i vs plait, dji lé l' fitchî: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Apontiaedje des abranles pa emile/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bénvnowe sol usteye d' apontiaedje des abranles pa emile/SMS.\n"
-"\n"
-"Chal, vos pôroz apontyî li sistinme d' abranles.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "wabmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "apontiaedje des siervices"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Vos rçuroz ene abranle si onk des tchoezis siervices si djoke di roter"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "tcherdjî les apontiaedjes"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Vos rçuroz ene abranle si l' tchedje est pus hôte kel valixhance dinêye chal"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "epontiaedje del abranle"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Apontyîz cmint li sistinme vos evoyrè les abranles"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Schaper eyet rlomer..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Tchoezixhoz li sôre di vosse sori."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nou serial_usb di trové\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuler li troezinme boton?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s trové so %s, l' apontyî?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Tchoezixhoz ene sicannrece"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Cisse sicannrece %s n' est nén sopoirtêye"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake n' a nén savou detecter vosse sicannrece %s.\n"
-"Tchoezixhoz l' éndjin k' ele est raloyeye avou"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "tchoezixhoz on éndjin"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Li scannrece %s doet esse apontieye pa printerdrake.\n"
-"Vos ploz enonder printerdrake a pårti do cinte di contrôle di Mandrake, el "
-"seccion «Éndjolreye»."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Vosse sicannrece %s a stî apontieye.\n"
-"Vos ploz asteure sicanner des documints avou «XSane» a pårti di l' intrêye "
-"«Multimedia/Grafikes» do menu des programes."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Apontiaedje do côpe feu"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Apontiaedje do côpe feu"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Côpe feu\n"
-"\n"
-"Vos avoz ddja apontyî on côpe feu.\n"
-"Clitchîz so «Apontyî» po candjî ou bodjî foû li côpe feu."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Côpe feu\n"
-"\n"
-"Clitchîz so «Apontyî» po-z apontyî on sistinme côpe feu tipike."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Tchoezi vosse lingaedje"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Li classe d' astalåcion"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Trover les deurès plakes"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Apontyî li sori"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tchoezi vosse taprece"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Såvrité"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistinmes di fitchîs"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Abwesner pårticions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pacaedjes a astaler"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Astaler sistinme"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Radjouter in ûzeu"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Apontyî li rantoele"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Apontyî les siervices"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Astaler l' enondrece"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Fé ene plakete d' enondaedje"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Apontyî X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Metaedjes a djoû do sistinme"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Moussî foû"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Apontiaedje d' on ptit côpe feu\n"
-"\n"
-"Çouci apontieye on côpe feu personel (dj' ô bén, po esse eployî sor on\n"
-"posse éndjolrece) po ciste éndjole Mandrake Linux chal.\n"
-"Po ene pouxhante solucion di côpe feu, loukîz purade do costé\n"
-"del distribucion MandrakeSecurity avou on côpe feu di hôte såvrité."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Asteure nos alans vos dmander ké siervices ki vos vloz ki seuyénxhe\n"
-"veyåves a pårti del rantoele daegnrece po les djins poleur s' î raloyî.\n"
-"S' i vs plait tûzez a çu ki vos rispondez, ca li såvrité di vosse\n"
-"copiutrece est importante.\n"
-"\n"
-"Si vos n' eployîz nén onk di ces siervices la, metoz-lu pa drî del côpe\n"
-"feu (firewall), come çoula on n' pôreut nén s' î raloyî (nerén li hacner)\n"
-"d' å dfoû. Vos poloz candjî cist apontiaedje a tolminme ké moumint\n"
-"simplumint e rnondant ci programe chal!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu waibe so ciste éndjole chal ki vos vloz ki\n"
-"tos les djins sol rantoele daegnrece polexhe vey? Si vos avoz on sierveu\n"
-"waibe k' i gn a ki ciste éndjole chal ki doet poleur li vey, vos ploz\n"
-"sins rûjhe dire «Neni» chal.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu di nos (DNS) so ciste éndjole chal?\n"
-"Si vos n' en avoz nén onk apontyî po dner des informåcions so des adresses\n"
-"et zônes IP ås djins sol rantoele daegnrece, adon rispondez «Neni» chal.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Volez-ve permete di rçure des raloyaedjes avou ssh (Secure Shell) so\n"
-"voste éndjole? Ssh est on replaeçmint di telnet ki vos ploz eployî\n"
-"po fé des login då lon. Si vos avîz ddja eployî telnet, vos dvrîz vormint\n"
-"candjî po ssh. telnet n' a nole såvrité -- des hacneus k' i gn a pôrént\n"
-"vey vosse sicret et l' eployî po fé des sacwès dizo voste identité.\n"
-"Ssh eploye on canå ecripté divant minme d' evoyî les screts, çu ki fwait\n"
-"k' on hacneu ni såreut nén ddja lere çu ki vos tapez."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Volez-ve permete di rçure des raloyaedjes viè telnet so voste éndjole?\n"
-"C' est dandjureus ki c' est a nén croere, come çoula a stî espliké\n"
-"el waitroûlêye di dvant. Nos vs ricomindans foirtumint di dire «Neni» chal\n"
-"et d' eployî purade ssh ki telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu FTP en alaedje ki vos vloz k' i pôye esse\n"
-"veyou a pårti del rantoele daegnrece po les djins s' î raloyî?\n"
-"Si vos en avoz onk, nos vos rcomandans foitemint del eployî rén ki po\n"
-"des transfers anonîmes. Ca tolminme ké sicret evoyî pa FTP pout esse\n"
-"lejhou pa on hacneu, li protocole FTP n' eployant nén d' ecriptaedje\n"
-"pol evoyaedje des screts.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu d' emilaedje chal? Si vos evoyîz vos emiles\n"
-"avou pine, mutt ou on ôte client d' emilaedje e môde tecse,\n"
-"c' est foirt possibe k' oyi.  Ôtrumint, vos dvrîz apontyî li mete\n"
-"pa drî li côpe feu.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Est-ce ki vos avoz on sierveu POP ou IMAP chal? Çouchal est eployî\n"
-"po permete di lodjer so ciste éndjole chal des adresses emile po\n"
-"des djins poleur vni lere leus messaedjes (nén viè ene eterface\n"
-"waibe, mins avou POP/IMAP).\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"I sonle ki vos rotez avou on nawea 2.2. Si l' adresse IP po vosse\n"
-"rantoele est dnêye otomaticmint pa ene copiutrece di vosse burô\n"
-"ou di vosse måjhone (adresse assinêye dinamicmint), adon i fåt\n"
-"permete çouchal.  Est-ce ki c' est vosse cas?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Est-ce ki vosse copiutrece mete si ôrlodje a l' eure tot s' sincronijhant\n"
-"avou l' ôrlodje d' ene ôte copiutrece?\n"
-"Çoula est eployî sortot pa les moyenès-grandès organizåcions Unix/Linux\n"
-"po sincronijhî l' eure so totes leus éndjoles. Si vos n' fijhoz nén pårteye\n"
-"d' ene grande eterprîjhe ou burô et n' avîz måy oyou djåzer di çoula,\n"
-"adon vos n' end avoz seurmint nén mezåjhe."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"L' apontiaedje a stî fini.  Voloz-ve schaper les candjmints sol plake?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Dji n' sai drovî %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Dji n' sai drovî %s po î scrire: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Neni, dji n' a nén mezåjhe di DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Oyi, dj' a mezåjhe di DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Neni, dji n' a nén mezåjhe di NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Oyi, dj' a mezåjhe di NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Èn nén schaper"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Schaper & Cwiter"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Macrea d' apontiaedje do côpe feu"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Neni (èn nén leyî passer çoula pal côpe feu)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Oyi (leyî passer çoula å dtruviè do côpe feu)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Tårdjîz on pô s' i vs plait... dji louke ås pacaedjes astalés"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"L' astalaedje des pacaedjes shûvants a fwait berwete: %s eyet Bastille.\n"
-" Vos les dvrîz astaler al mwin."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Sierveu, Waibe/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Copiutrece rantoele (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Sierveu NFS, sierveu SMB, sierveu proxy, sierveu SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Burô"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Posse éndjolrece Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Usteyes po vosse Palm Pilot ou vosse Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Posse éndjolrece"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Côpe feu/Roûteu"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Sierveu di nos (DNS) et sierveu djaenès pådjes (NIS)"
-
-# FIXME: "aspougneu d' tecse" c' est purade po "text editor", cwè mete
-# po "word processor" ? Oudobén candjî "text editor" po ôte tchwè pattavå?
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programes di burô: aspougneus di tecse (kword, abiwrod), tåvleus (kspread, "
-"gnumeric), håyneus pdf, evnd."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Usteyes ki ont a vey avou l' son: djoweus mp3 ou MIDI, maxheus,..."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Lîves et Howtos so GNU/Linux et les libes programes"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Posse éndjolrece KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Vidéyo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Usteyes pol emilaedje, les copinreyes, naiviaedje waibe, transfer di "
-"fitchîs, eyet li chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Sierveu, båzes di dnêyes"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Sierveu båze di dnêyes PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Usteyes po vos aveur pus åjhey d' apontyî vosse copiutrece"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Usteyes"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documintåcion"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Usteyes pol conzôle"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Sierveu d' emilaedje postfix, sierveu di news INN"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Posse pol rantoele daegnrece"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Posse multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Apontiaedje"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Des ôtes scribannes grafikes (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"L' evironmint di scribanne KDE, l' evironmint grafike di båze, avou ene "
-"coleccion d' usteyes ki vnèt avou"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Evironmint grafike"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache eyet Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Usteyes po fé et graver des plakes lazer"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Posse di burô"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Sierveu"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programes grafikes come li Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Lîvreyes di programaedje C et C++, programes et fitchîs *.h"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Copiutrece sierveu sol rantoele"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Sierveu, Emilaedje/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Posse di djeus"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Djoweus et aspougneus di vidéyo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikes"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programes pasmints d' tins: årcåde, plateas, stratédjeye, evnd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Énsembe d' usteyes po lere et evoyî des messaedjes (pine, mutt, tin...) et "
-"po naivyî so les pådjes waibe"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Årtchivaedje, emulateus, corwaitaedje"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personelès finances"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"On evironmint grafike avou on amiståve énsembe di programes et d' usteyes "
-"pol scribanne"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients po les protocoles k' i gn a (ssh avou)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Pasrele pol rantoele daegnrece"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programes po vey/schoûter/candjî des sons et vidéyos"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ôtes sicribannes grafikes"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Aspougneus, shells, usteyes po fitchîs, terminås"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programes po vos manaedjî vos çanses, come li gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Manaedjmint des finances personéles"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Gravaedje di plakes lazer"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Posse éndjolrece siyintifike"
-
-#~ msgid "About"
-#~ msgstr "Å dfait"
-
-#~ msgid "             Help           "
-#~ msgstr "         Aidance         "
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "XawTV n' a nén stî astalé ...\n"
-#~ "Vos l' duvrîz astaler.\n"
-#~ " Po çoula tapez «urpmi xawtv»"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Dji n' sai trover les modules ki corespondèt a vosse nawea\n"
-#~ "(i gn a pont di fitchî %s)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Nouk"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Tchoezixhoz li prémetowe sicrirece!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Mete en oûve/lere co ene feye l' apontiaedje des scrireces"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Asteure, vos poloz dner les tchûzes pol module %s."
-
-#~ msgid "mount failed"
-#~ msgstr "li montaedje a fwait berwete"
-
-#~ msgid "Low"
-#~ msgstr "Basse"
-
-#~ msgid "Medium"
-#~ msgstr "Moyene"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Ci livea chal a sacwants ramîdraedjes pol såvrité, principålmint i gn a\n"
-#~ "pus di messaedjes d' adviertixhmint et des verificåcions."
-
-#~ msgid "Art and Multimedia"
-#~ msgstr "Årts eyet multimedia"
-
-#~ msgid ""
-#~ "A total of 11 different user interfaces are provided, including GNOME "
-#~ "1.4, KDE 2.2.2, Window Maker, ..."
-#~ msgstr ""
-#~ "Nén moens ki 11 eterfaces ûzeu diferinnes, avou GNOME 1.4, KDE 2.2.2, "
-#~ "Window Maker, et co des ôtes ..."
-
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Po-z aveur ene djîvêye des tchûzes k' i gn a pol sicrirece lijhoz li "
-#~ "djîvêye chal pa dzo oudobén clitchîz sol boton «Djîvêye des tchûzes pol "
-#~ "eprimaedje». %s\n"
-#~ "\n"
-
-#~ msgid "Boot mode"
-#~ msgstr "Môde d' enondaedje"
-
-#~ msgid "Export"
-#~ msgstr "Ebagaedje"
-
-#~ msgid "click here"
-#~ msgstr "clitchîz chal"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr ""
-#~ "Cisse sicannrece %s eploye li pôrt paralele, çoula n' est nén co sopoirté"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux comprind les eures GMT («Greenwich Mean Time») eyet les\n"
-#~ "rmete dins l' eure di vosse payis, come vos avoz tchoezi."
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Aloyances otomatikes"
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Si raloyî al rantoele daegnrece"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Si disraloyî del rantoele daegnrece"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Apontyî li raloyaedje del rantoele (locåle ou daegnrece)"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "%s detecté, el vloz apontyî?"
-
-#~ msgid "Here is a list of all auto-detected printers. "
-#~ msgstr "Vochal ene djîvêye di totes les scrireces oto-detectêyes."
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Tchoezixhoz li scrirece ki vos vloz apontyî."
-
-#~ msgid "Infos"
-#~ msgstr "Informåcions"
-
-#~ msgid "Windows Importation"
-#~ msgstr "Abagaedje di fontes di Windows"
-
-#~ msgid "window title - ask_from"
-#~ msgstr "tite do purnea - ask_from"
-
-#~ msgid ""
-#~ "message\n"
-#~ "examples of utilisation of ask_from"
-#~ msgstr ""
-#~ "messaedje\n"
-#~ "egzimpes d' eployaedje di ask_from"
-
-#~ msgid "authentification"
-#~ msgstr "oténtifiaedje"
-
-#~ msgid "user"
-#~ msgstr "ûzeu"
-
-#~ msgid ""
-#~ "Postfix is a Mail Transport Agent, which is the program that\n"
-#~ "moves mail from one machine to another."
-#~ msgstr ""
-#~ "Postfix est ene usteye ki fwait voyaedjî les emiles d' ene éndjole \n"
-#~ "a l' ôte."
-
-#~ msgid ""
-#~ "Please choose the desired printer/printer port or enter a device name/"
-#~ "file name in the input line"
-#~ msgstr ""
-#~ "Tchoezixhoz li scrirece/pôrt ki vos vloz, ou dnez on no d' éndjin ou "
-#~ "d' fitchî sol roye d' intrêye, s' i vs plait."
-
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tchoezixhoz li scrirece/pôrt ki vos vloz, s' i vs plait.\n"
-#~ "\n"
-
-#~ msgid "Your choice"
-#~ msgstr "Vosse tchûze"
-
-#~ msgid ""
-#~ "\n"
-#~ "\n"
-#~ msgstr ""
-#~ "\n"
-#~ "\n"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Cwerant après les pårteyes resources NFS"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Cwerant après les pårteyes resources NFS sol sierveu %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Cwerant après les pårteyes resources samba"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Cwerant après les pårteyes resources samba sol sierveu %s"
-
-#~ msgid "Removable media"
-#~ msgstr "Sopoirts bodjåves"
-
-#~ msgid "Active"
-#~ msgstr "En alaedje"
-
-#~ msgid "No X"
-#~ msgstr "Sins X11"
-
-#~ msgid "Base system only"
-#~ msgstr "Rén kel sistinme di båze"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Ene scrirece, modele «%s», a stî trovêye so "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Éndjin del scrirece locåle"
-
-#~ msgid "Printer Device"
-#~ msgstr "Éndjin del scrirece"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Nou no d' fitchî/d' éndjin!"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Sicrirece(s) sor on/des sierveu(s) CUPS å lon"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Sicrirece(s) sor on/des sierveu(s) å lon"
diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
deleted file mode 100644
index 2bc437986..000000000
--- a/perl-install/share/po/zh_CN.po
+++ /dev/null
@@ -1,11311 +0,0 @@
-# DrakX messages for zh_CN locale
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-#
-# Jesse Kuang <kjx@mandrakesoft.com>
-# DU Xiaoming <dxiaoming@mandrakesoft.com>, 2001
-#
-# Earlier translater:
-# Danny Zeng <zeng@synopsys.com>, 2000
-#
-# Earlier translaters:
-# Cheng Yuan-Chung <platin@ms31.hinet.net>, 1999
-# <c17@acer.17.o3.net>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-09-27 13:29+0800\n"
-"Last-Translator: DU Xiaoming <dxiaoming@mandrakesoft.com>\n"
-"Language-Team: future-cjk <future-cjk@mandrakesoft.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=gb2312\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "ÅäÖÃËùÓÐÏÔʾÆ÷"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "ʹÓà Xinerama À©Õ¹"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "ÅäÖÃÏÔ¿¨ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "¶àÏÔʾÆ÷ÅäÖÃ"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"ÄúµÄϵͳ֧³Ö¶àÏÔʾÆ÷.\n"
-"ÊÇ·ñ½øÐÐÅäÖÃ?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "ÏÔʾ¿¨"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "ÇëÑ¡ÔñÒ»ÖÖÏÔʾ¿¨"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "ÇëÑ¡ÔñÒ»ÖÖ X ·þÎñÆ÷"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ·þÎñÆ÷"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "ÇëÑ¡ÔñÒ»ÖÖ X ·þÎñÆ÷"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ·þÎñÆ÷"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ÄúÏ£ÍûÓµÓÐÄĸö XFree ÅäÖÃ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"ʹÓà XFree %s, ÄúµÄÏÔʾ¿¨¿ÉÒԵõ½ 3D Ó²¼þ¼ÓËÙÖ§³Ö.\n"
-"XFree %s Ö§³ÖÄúµÄÏÔʾ¿¨, ËüÄÜÌṩ¸üºÃµÄ 2D Ö§³Ö."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "ʹÓà XFree %s, ÄúµÄÏÔʾ¿¨¿ÉÒԵõ½ 3D Ó²¼þ¼ÓËÙÖ§³Ö."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ´øÓÐÓ²¼þ 3D ¼ÓËÙµÄÖ§³Ö"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"ʹÓà XFree %s, ÄúµÄÏÔʾ¿¨¿ÉÒԵõ½ 3D Ó²¼þ¼ÓËÙÖ§³Ö.\n"
-"×¢ÒâÕâÊÇÊÔÑé½×¶ÎµÄÖ§³Ö, Ëü¿ÉÄÜ»áʹÄúµÄµçÄÔʧȥ·´Ó¦."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ´øÓÐÊÔÑé½×¶ÎµÄ3DÓ²¼þ¼ÓËÙÖ§³Ö"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ö»ÓÐʹÓà XFree %s, ÄúµÄÏÔʾ¿¨²Å¿ÉÒԵõ½ 3D Ó²¼þ¼ÓËÙÖ§³Ö.\n"
-"×¢ÒâÕâÊÇÊÔÑé½×¶ÎµÄÖ§³Ö, Ëü¿ÉÄÜ»áʹÄúµÄµçÄÔʧȥ·´Ó¦\n"
-"XFree %s Ö§³ÖÄúµÄÏÔʾ¿¨, ËüÄÜÌṩ¸üºÃµÄ 2D Ö§³Ö."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (°²×°ÏÔ¿¨Çý¶¯)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree ÅäÖÃ"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "ÇëÑ¡ÔñÄúÏÔʾ¿¨ÉÏÄÚ´æµÄ´óС"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "ÇëÑ¡Ôñ X ·þÎñÆ÷µÄ²ÎÊý"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "ÇëÑ¡ÔñÒ»ÖÖÏÔʾÆ÷"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "ÏÔʾÆ÷"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Á½¸ö¹Ø¼üµÄ²ÎÊý:\n"
-"(1) ´¹Ö±¸üÐÂƵÂÊ, ÓÃÓÚÉèÖÃÆÁĻÿÃëÖÓ¸üеĴÎÊý;\n"
-"(2) ˮƽ¸üÐÂƵÂÊ, ÓÃÓÚÉèÖÃÏÔʾɨÃèÏßµÄËÙÂÊ.\n"
-"\n"
-"ǧÍòСÐÄ! ²»Òª°ÑÕâЩͬ²½·¶Î§É趨µÃ³¬¹ýÄúµÄÏÔʾÆ÷µÄÄÜÁ¦.\n"
-"²»Ç¡µ±µÄÉèÖÿÉÄÜ»áËðº¦ÄúµÄÏÔʾÆ÷!\n"
-"ËùÒÔû°ÑÎÕʱ, Äú¿ÉÒÔÑ¡Ôñ±£ÊصÄÉ趨."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "ˮƽ¸üÐÂƵÂÊ"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "´¹Ö±¸üÐÂƵÂÊ"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "ÉÐδÍê³ÉÏÔʾÆ÷É趨"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "ÉÐδÍê³ÉÏÔʾ¿¨É趨"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "ÉÐδѡȡҪʹÓõķֱæÂÊ"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "ÄúÏëÒª²âÊÔÄúµÄÉ趨ֵÂð ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "СÐÄ! ÏÔʾ¿¨µÄ²âÊÔ¿ÉÄÜ»áËø¶¨ÄúµÄµçÄÔ"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "²âÊÔÉ趨ֵ"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"³¢ÊԸıäһЩ²ÎÊý"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "·¢Éú´íÎó¡Ã"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "(ÔÚ %d ÃëÖÓºóÀ뿪)"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "ÕâÑùÉ趨ÕýÈ·Âð?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "·¢Éú´íÎó£¬ÇëÊÔןü¸ÄһЩ²ÎÊýµÄÖµ"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "ÆÁÄ»·Ö±æÂÊ"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Ñ¡È¡ÆÁÄ»·Ö±æÂÊÒÔ¼°ÑÕÉ«Éî¶È"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "ÏÔʾ¿¨: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ·þÎñÆ÷: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "¸ü¶à"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "È·¶¨"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "ר¼Òģʽ"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "ÏÔʾȫ²¿"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "½âÎö¶È"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "¼üÅ̵IJ¼¾Ö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Êó±êÀàÐÍ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Êó±êÁ¬½ÓÉ豸: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "ÏÔʾÆ÷: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "ÏÔʾÆ÷ˮƽ¸üÐÂƵÂÊ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "ÏÔʾÆ÷´¹Ö±¸üÐÂƵÂÊ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "ÏÔʾ¿¨: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "ÏÔʾ¿¨: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ÏÔ´æ: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "²ÊÉ«Éî¶È: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "·Ö±æÂÊ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ·þÎñÆ÷: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 Çý¶¯³ÌÐò: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "ÕýÔÚ×¼±¸ X-Window µÄÉ趨"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Äú´òËãÔõô×÷ ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "¸Ä±äÏÔʾÆ÷É趨"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "¸Ä±äÏÔʾ¿¨"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "¸Ä±ä·þÎñÆ÷³ÌÐòµÄ²ÎÊý"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "¸Ä±ä·Ö±æÂÊ"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "ÏÔʾËùÓÐÐÅÏ¢"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "ÔٴβâÊÔÉ趨ֵ"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "½áÊø"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"±£´æÐÞ¸Ä?\n"
-"µ±Ç°ÅäÖÃÊÇ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "¿ª»úʱÆô¶¯ X"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"ÎÒ¿ÉÒÔÉ趨ÄúµÄµçÄÔÔÚ¿ª»úʱ×Ô¶¯½øÈë X Window »·¾³£¬\n"
-"ÄúÏ£ÍûÕâô×öÂð?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "ÇëÖØеǼµ½ %s ʹÄúËù×öµÄ¸ü¸ÄÉúЧ"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "ÇëÍ˳ö, È»ºóͬʱ°´ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ɫ (8 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3 Íò 2 ǧɫ (15 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6 Íò 5 ǧɫ (16 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "1 ǧ 6 °ÙÍòÉ« (24 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ÒÚÉ« (32 λԪ)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB »òÒÔÉÏ"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "±ê×¼ VGA ģʽ, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 ÏàÈÝģʽ, 1024x768 at 87 Hz ¸ôÐÐɨÃè (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 at 87 Hz ¸ôÐÐɨÃè, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "À©Õ¹ Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "ÖðÐÐɨÃè SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "¸ßƵÂÊ SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "¶àƵÂÊ, ×î¸ß´ï 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "¶àƵÂÊ, ×î¸ß´ï  1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "¶àƵÂÊ, ×î¸ß´ï 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "ÄúµÄÏÔʾÆ÷¿ÉʹÓà 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "ÄúµÄÏÔʾÆ÷¿ÉʹÓà 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "¿ª»ú·ÖÇøµÄµÚÒ»ÉÈÇø"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ó²Å̵ÄÖ÷Òýµ¼Çø (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO °²×°"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "ÄúÏ£Íû¿ª»úÒýµ¼³ÌÐò°²×°µ½ÄÄÀï?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub °²×°"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "Îı¾²Ëµ¥ LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "ͼÐβ˵¥ LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "´ÓDOS/WindowsÆô¶¯"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "¸ù·ÖÇø"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "¿ª»úÒýµ¼³ÌÐòµÄÖ÷ҪѡÏî"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "¿ª»úÒýµ¼³ÌÐò"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "¿ª»úÒýµ¼³ÌÐò°²×°"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "¿ª»úÒýµ¼É豸"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ÔÚÀÏ¾ÉµÄ BIOS Éϲ»Äܹ¤×÷)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "½ô´Õ"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "½ô´Õ"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "ÏÔʾģʽ"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "¿ª»úµÈºòʱ¼ä"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "¿ÚÁî"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "¿ÚÁî (ÔÙÒ»´Î)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "ÏÞÖÆÃüÁîÐÐÑ¡Ïî"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ÏÞÖÆ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "ÿ´Î¿ª»úʱÇå³ý /tmp"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "¾«È·µÄ´æ´¢Æ÷´óС (ÕÒµ½ %dMB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "ÔËÐжàÖÖÅäÖÃ"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "¸æËßÎÒÓжàÉÙ Mb µÄÄÚ´æ"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "ûÓпÚÁî²»ÄÜʹÓà ``ÏÞ¶¨²ÎÊýÑ¡Ïî''"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "ÇëÔÙÊÔÒ»´Î"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Á½´Î¿ÚÁî²»·û"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "³õʼÐÅÏ¢"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "¹Ì¼þÑÓ³Ù"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "ºËÐÄÆô¶¯³¬Ê±"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD Æô¶¯?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF Æô¶¯?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "ȱʡ²Ù×÷ϵͳ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ÏÖÔÚÓÐÏÂÁÐÌõÄ¿.\n"
-"Äú¿ÉÒÔÔö¼Ó»òÊǸü¸ÄÒÑ´æÔÚµÄÌõÄ¿"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ôö¼Ó"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Íê³É"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "ÐÞ¸Ä"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ÒªÔö¼ÓµÄÌõÄ¿ÊÇʲôÀàÐÍ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "ÆäËû²Ù×÷ϵͳ (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "ÆäËû²Ù×÷ϵͳ (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "ÆäËû²Ù×÷ϵͳ (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Ó³ÏóÎļþ"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "¸ùĿ¼ËùÔÚ·ÖÇø"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Ôö¼Ó"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "¿É¶Áд"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "±í¸ñ"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "²»°²È«"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "±êÇ©"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "ȱʡ"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd´óС"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "ÎÞÊÓƵ"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "ɾ³ýÌõÄ¿"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "±êÇ©²»ÄÜΪ¿Õ"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Äú±ØÐëÖ¸¶¨Ò»¸öÄÚºËÎļþ"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Äú±ØÐëÖ¸¶¨¸ùĿ¼ËùÔÚ·ÖÇø"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Õâ¸öÃû×ÖÒѾ­±»Ê¹ÓÃ"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "ÕÒµ½ %s %s ½Ó¿Ú"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "ÄúÓÐÆäËûµÄÂð ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Äú»¹ÓÐÆäËû %s ½Ó¿ÚÂð ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "·ñ"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "ÊÇ"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "²é¿´Ó²ÌåÐÅÏ¢"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ÕýÔÚ°²×° %s ¿¨ %s µÄÇý¶¯³ÌÐò"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(Ä£¿é %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "³¢ÊÔʹÓÃÄĸö %s Çý¶¯³ÌÐò ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"ÓÐʱºòÐèÒª¸ø %s Çý¶¯³ÌÐòÖ¸¶¨¶îÍâµÄÐÅÏ¢²ÅÄÜÕý³£ÔËÐÐ, ¾¡¹Üͨ³£²»ÐèÒª.\n"
-"Äú¿ÉÒÔÔÚÕâÀïÖ¸¶¨Ò»Ð©¶îÍâµÄÑ¡Ïî, Ò²¿ÉÒÔÈÃÇý¶¯³ÌÐò̽²âÄúµÄ»úÆ÷, ×Ô¶¯\n"
-"È·¶¨ÐèÒªµÄÐÅÏ¢. ż¶û»á·¢Éú»úÆ÷ÔÚ̽²âÖÐÍ£Ö¹·´Ó¦, ²»¹ýÕâ²»»áËð»µÊ²Ã´. \n"
-"Äú¾ö¶¨Ôõô×ö ?"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "×Ô¶¯Ì½²â"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Ö¸¶¨²ÎÊý"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"ÏÖÔÚ¸øÄ£¿é %s Ö¸¶¨ËüµÄÑ¡Ïî. \n"
-"Ñ¡ÏîµÄ¸ñʽÊÇ ``name=value name2=value2...'' \n"
-"ÀýÈ磬 ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Ä£¿é²ÎÊý"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ä£¿é %s ¼ÓÔØʧ°Ü.\n"
-"ÄúÒª³¢ÊÔÆäËûµÄ²ÎÊýÂð ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "ÔÊÐíʹÓà X Window Ó¦ÓóÌÐò"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "ÔÊÐíʹÓðü¹ÜÀí¹¤¾ß"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "ÔÊÐíʹÓÃ\"su\"Ö¸Áî"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "ÔÊÐí·ÃÎÊϵͳÅäÖÃÎļþ"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ÒѾ­Ôö¼ÓÁË %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "¿ÚÁîÌ«¼òµ¥"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Çë¸ø³öÓйØÓû§Ãû"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Óû§ÃûÖ»ÄÜÓÐСд×Öĸ¡¢Êý×Ö£¬`-' ºÍ `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "¸ÃÓû§ÃûÒѾ­´æÔÚ"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ôö¼ÓÐÂÓû§"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ÇëÊäÈëÒ»¸öÓû§Ãû\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "½ÓÊܸÃÓû§"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Óû§ÕæʵÐÕÃû"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Óû§µÇ¼Ãû"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "ͼ±ê"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "×Ô¶¯µÇ¼"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Äú¿ÉÒÔÔÚÕâÀïÉ趨¿ª»úʱ×Ô¶¯ÒÔijÓû§µÄÉí·ÝµÇÈëϵͳ.\n"
-"ÄúÏ£ÍûʹÓÃÕâ¸öÌØÐÔÂð ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Ñ¡ÔñȱʡµÄÓû§:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Ñ¡ÔñÒªÔËÐеĴ°¿Ú¹ÜÀí³ÌÐò:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "ÇëÑ¡ÔñϵͳȱʡʹÓõÄÓïÑÔ."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Äú¿ÉÒÔÔÚÕâÀïÔö¼ÓϵͳÖÐÆäËû¿ÉÓõÄÓïÑÔ"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "È«²¿"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "ÔÊÐíËùÓÐÓû§Ê¹ÓÃ"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "¶¨ÖÆ"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "½ûÖ¹¹²Ïí"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"ÐèÒª°²×°Èí¼þ°ü %s .\n"
-". ÄúͬÒâ°²×°Âð ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Äú¿ÉÒÔͨ¹ý NFS »ò Samba À´¹²ÏíÎļþ. ÄúÏ£ÍûʹÓÃÄÄÒ»¸ö? "
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "ÎÞ·¨ÕÒµ½°üÎļþ %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "È¡Ïû"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "»¶Ó­ÈëÇÖÕß"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "²î"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "±ê×¼"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "¸ß"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "¸ß"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "¿Á¿Ì"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"ÎÞ¿ÚÁî¼ì²é!\n"
-"ÕâÒ»¼¶±ðÓ¦É÷ÖØʹÓÃ. ËüÊÇÄúµÄϵͳʹÓøü¼òµ¥, È»¶øÒ²¸ü´àÈõ:\n"
-"¼ÙÈçÕą̂»úÆ÷½«ÒªºÍÆäËû»úÆ÷ÁªÍø»òÕß½ÓÈ뻥ÁªÍø, ¾ø¶Ô²»Òª²ÉÓÃÕâ¸ö¼¶±ð."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "¿ªÆôÁË¿ÚÁî¼ì²é¹¦ÄÜ. µ«ÊÇÈÔ²»½¨ÒéÓÃÓÚÁªÍøµÄµçÄÔ."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"±ê×¼°²È«¼¶±ð: ÁªÍøµçÄԺͲ¦ºÅÓû§ÍƼöʹÓÃ.\n"
-"¸Ã¼¶±ðÓ¦ÓÃÁ˱ØÒªµÄ°²È«¼ì²é´ëÊ©."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"·þÎñÆ÷ÍƼöʹÓð²È«¼¶±ð.\n"
-"ÓµÓÐ×ã¹»µÄ°²È«ÐÔ, ϵͳ¿ÉÒÔ×÷Ϊ·þÎñÆ÷½ÓÊÜÀ´×ÔÖÚ¶à¿Í»§µÄÁ¬½Ó."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"»ùÓÚÉÏÒ»¼¶°²È«¼¶±ð, ²»¹ýϵͳ´¦ÓÚÍêÈ«·â±Õ״̬.\n"
-"ËùÓа²È«ÌØÐÔ´ïµ½×î´óÏÞ¶È."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Ñ¡Ôñ°²È«¼¶±ð"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "°²È«¼¶±ð"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "·þÎñÆ÷ʹÓà libsafe"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "·ÀÖ¹»º³åÒç³öºÍ´®¸ñʽ¹¥»÷"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-# 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr " /boot ÖÐûÓÐ×ã¹»¿Õ¼ä"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "×ÀÃæ"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "¿ªÊ¼²Ëµ¥"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "%s ·ÖÇø²»ÄÜ°²×°¿ª»úÒýµ¼³ÌÐò\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "°ïÖú¹¦ÄÜδʵÏÖ.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Æô¶¯ÅäÖÃ"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_FÎļþ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Îļþ/_QÍ˳ö"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<¿ØÖÆ>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "ÐÂÐÍÏÔʾÆ÷"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "ÐÂÐÍÏÔʾÆ÷"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "´«Í³ÏÔʾÆ÷"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "´«Í³Gtk+ÏÔʾÆ÷"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Æô¶¯Ê±ÔËÐÐAurora"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grubģʽ"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yabootģʽ"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÄãĿǰʹÓà %s ×÷Ϊ¿ª»ú³ÌÐò¹ÜÀíÆ÷.\n"
-"µã»÷''ÅäÖÃ''ÔËÐÐÅäÖþ«Áé."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "ÅäÖÃ"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "ϵͳģʽ"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Æô¶¯Ê±ÔËÐÐX´°¿Ú"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "²»£¬²»Òª×Ô¶¯Â¼Èë"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "ÊÇ, ÒÔ(Óû§,×ÀÃæ)¼Èë"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "È·¶¨"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÎÞ·¨´ò¿ª /etc/inittab ¶Á: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ·ÖÖÓ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ·ÖÖÓ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr " %d ÃëÖÓ"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "ÎÞ·¨ÔÚ·ÖÇøÍê³É֮ǰ½øÐÐÆÁÄ»²¶×½"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Äú¿ÉÒÔÔÚ°²×°µ½ %s Ö®ºóÔÙʹÓÃÆÁÄ»²¶×½¹¦ÄÜ"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "·¨¹ú"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "¸ç˹´ïÀè¼Ó"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "±ÈÀûʱ"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "½Ý¿Ë¹²ºÍ¹ú"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "µÂ¹ú"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Ï£À°"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "ŲÍþ"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Èðµä"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "ºÉÀ¼"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Òâ´óÀû"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "°ÂµØÀû"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "ÃÀ¹ú"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "ÇëÏȱ¸·ÝÄúµÄÊý¾Ý"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Çë×ÐϸÔĶÁ!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Èç¹ûÄú¼Æ»®²ÉÓà aboot, Çë×¢ÒâÔÚ´ÅÅ̵ĿªÍ·Î»ÖÃÁôÏÂÒ»¶Î×ÔÓÉ¿Õ¼ä\n"
-"( 2048 ÉÈÇø¾Í×ã¹»ÁË)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "´íÎó"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Ïòµ¼"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Ñ¡Ôñ²Ù×÷"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"ÄúÓÐÒ»¸öºÜ´óµÄ FAT ·ÖÇø£¬\n"
-"(ͨ³£ÊÇ Microsoft Dos/Windows Õ¼ÓõÄ).\n"
-"½¨ÒéÄúÏÈÖØÉèÕâ¸ö·ÖÇøµÄ´óС\n"
-"(µãÖÐËü£¬È»ºó°´ \"¸Ä±ä´óС\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "ÇëÑ¡ÖÐÒ»¸ö·ÖÇø"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "ÏêϸÇé¿ö"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "ÈÕÖ¾Îļþϵͳ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "½»»»·ÖÇø"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "¿Õ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "ÆäËû"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "ÎļþϵͳÀàÐÍ:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "н¨"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "ÀàÐÍ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ÓÃ ``%s'' ´úÌæ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "ɾ³ý"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "ÇëÏÈ×ö ``Unmount'' "
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Ôڸıä·ÖÇø±í %s µÄÀàÐÍÖ®ºó, ÔÚÕâ¸ö·ÖÇøÉϵÄËùÓÐ×ÊÁϽ«Òª±»Çå³ý"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Ñ¡Ôñ·ÖÇø"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Ñ¡ÔñÆäËû·ÖÇø"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Í˳ö"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "½øÈëר¼Òģʽ"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "½øÈëÕý³£Ä£Ê½"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "³·Ïú"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "ðÏÕ¼ÌÐøÖ´ÐÐ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "²»±£´æ¸Ä±ä¾ÍÍ˳ö"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "²»Ð´Èë·ÖÇø±í¶øÍ˳ö?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ÄúÏëÒª±£´æ /etc/fstab ÐÞ¸ÄÂð ?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "×Ô¶¯·ÖÅä"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "È«²¿Çå³ý"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Ó²ÅÌÐÅÏ¢"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Ö÷ÇøÊýÄ¿ÒѾ­ÂúÁË"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "ÎÒÎÞ·¨ÔÙÐÂÔöÈκηÖÇøÁË"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Èç¹ûÐèÒª¸ü¶àµÄ·ÖÇø£¬Çëɾ³ýÒ»¸öÖ÷·ÖÇøÒÔ´´½¨À©Õ¹·ÖÇø"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "±£´æ·ÖÇø±í"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "ÕýÔÚ³¢ÊÔ»Ö¸´·ÖÇø±í"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "ÕýÔÚ³¢ÊÔÐÞ¸´·ÖÇø±í"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "ÖØжÁÈ¡·ÖÇø±í"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "×Ô¶¯×°ÔØ¿ÉÒƶ¯½éÖÊ"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Ñ¡ÔñÎļþ"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"±¸·Ý·ÖÇø±íµÄ´óСºÍÔ­À´µÄ²»Í¬\n"
-"¼ÌÐøÂð ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "¾¯¸æ"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"ÇëÔÚÇý¶¯Æ÷ÖвåÈëÒ»ÕÅÈíÅÌ\n"
-"ÕâÕÅÈíÅÌÉÏËùÓеÄÊý¾Ý½«Òª±»Çå³ý"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "ÕýÔÚ³¢ÊÔ»Ö¸´·ÖÇø±í"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "ÏêϸÐÅÏ¢"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "×°Ôصã"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Ñ¡Ïî"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "¸Ä±ä´óС"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Òƶ¯"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "¸ñʽ»¯"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "×°ÔØ"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "¼ÓÈë´ÅÅÌÕóÁÐ"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "¼ÓÈë´ÅÅÌÕóÁÐ"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "жÔØ"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "´Ó´ÅÅÌÕóÁÐÖÐÒƳö"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "´Ó´ÅÅÌÕóÁÐÖÐÒƳö"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "¸ü¸Ä´ÅÅÌÕóÁÐÉ趨"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "ÓÃÓڻػ·"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "´´½¨Ò»¸öеķÖÇø"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "¿ªÊ¼ÉÈÇø: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "´óС (MB) "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "ÎļþϵͳÀàÐÍ: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "¼ÓÔصã:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Æ«ºÃÉ趨"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "ɾ³ý»Ø»·(loopback)Îļþ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "¸Ä±ä·ÖÇøÀàÐÍ"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "ÄúÏ£ÍûʹÓÃÄÄÖÖÎļþϵͳ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "°Ñext2Éý¼¶µ½ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "ÄúÏë°Ñ»Ø»·(loopback)Îļþ %s ×°Ôص½ÄÄÀï?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ÄúÏë°ÑÉ豸 %s ×°Ôص½ÄÄÀï?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"ÎÞ·¨È¡ÏûÉ趨µÄ×°Ôصã, Õâ¸ö·ÖÇøÕýÓÃÓڻػ·.\n"
-"ÇëÏÈɾ³ý»Ø»·"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "¼ÆËã FAT ÎļþϵͳµÄ±ß½ç"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "ÕýÔڸıä´óС"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "²»ÄܸıäÕâ¸ö·ÖÇøµÄ´óС"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Ó¦¸ÃÏȱ¸·ÝÔÚÕâ¸ö·ÖÇøÉϵÄËùÓÐÊý¾Ý"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "¸Ä±ä·ÖÇø %s µÄ´óС֮ºó, Õâ¸ö·ÖÇøÉÏÏÖÓеÄËùÓÐ×ÊÁϽ«±»Çå³ý"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Ñ¡ÔñеĴóС"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "дóС (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "ÄúÏëÒƶ¯µ½ÄĸöÅÌ ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "ÉÈÇø"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "ÄúÏëÒƶ¯µ½ÄĸöÉÈÇø ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Òƶ¯ÖÐ"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "ÕýÔÚÒƶ¯·ÖÇø..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Ñ¡Ôñ¼ÓÈëÒ»¸öÒÑ´æÔÚµÄ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "н¨"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Ñ¡Ôñ¼ÓÈëÒ»¸öÒÑ´æÔÚµÄ LVM"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVMÃû³Æ?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Õâ¸ö·ÖÇø²»Äܱ»ÓÃÓڻػ·"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "»Ø»·"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "»Ø»·ÎļþÃû: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "ÎļþÃû"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "ÎļþÒѾ­±»ÁíÒ»¸ö»Ø»·Ê¹ÓÃ, ÇëÑ¡ÔñÆäËû"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "ÎļþÒѾ­´æÔÚ. ʹÓÃÏÖÓеÄÎļþ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "×°ÔØÑ¡Ïî"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "±äÁ¿"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "É豸"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "¼¶±ð"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "×é¿é´óС"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "СÐÄ: Õâ¸ö²Ù×÷ÓÐΣÏÕ."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "ÇëÎÊÄú·ÖÇøÀàÐÍ?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Çë²»ÒªÔÚÓ²Å̵ÄÖùÃæ 1024 Ö®ºó´´½¨ /boot ·ÖÇø.\n"
-"Èç¹ûÄúʹÓà LILO, Ëüû·¨Õý³£¹¤×÷; ¼ÙÈçÄú²»Ê¹Óà LILO, \n"
-"Ôò²»ÐèÒª´´½¨ /boot ·ÖÇø"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"ÄúÑ¡Ôñ×÷Ϊ¸ù (/) ¼ÓÈëµÄ·ÖÇø, ÔÚÓ²ÅÌÉϵÄλÖÃλÓÚµÚ 1024 ÖùÃæÖ®ºó,\n"
-"²¢ÇÒÄúûÓд´½¨ /boot ·ÖÇø.\n"
-"Èç¹ûÄú¼Æ»®Ê¹Óà LILO Æô¶¯¹ÜÀí³ÌÐò, ÇëÔÚÊʵ±Î»ÖüÓÈë /boot ·ÖÇø."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"ÄúÑ¡ÔñÁË°ÑÈí¼þ RAID ·ÖÇø×÷Ϊ¸ù (/).\n"
-"Èç¹ûûÓÐ /boot ·ÖÇø, ¿ª»úÒýµ¼³ÌÐòÎÞ·¨´¦ÀíÕâÖÖÇé¿ö.\n"
-"ËùÒÔ, ÇëÔö¼ÓÒ»¸ö /boot ·ÖÇø."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Çý¶¯Æ÷ %s µÄ·ÖÇø±í½«»áдÈë´ÅÅÌÖÐ !"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Äú±ØÐèÖØпª»úʹÄú×öµÄ¸ü¶¯ÉúЧ"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "¸ñʽ»¯·ÖÇø %s Ö®ºó, ÔÚÕâ¸ö·ÖÇøÉϵÄËùÓÐ×ÊÁϽ«Òª±»Çå³ý"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "ÕýÔÚ¸ñʽ»¯"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "ÕýÔÚ¸ñʽ»¯»Ø»·(loopback)Îļþ %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "ÕýÔÚ¸ñʽ»¯·ÖÇø %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Òþ²ØÎļþ"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Òƶ¯Îļþµ½Ð·ÖÇø"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Ŀ¼ %s ÒѾ­°üº¬Êý¾Ý\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "ÕýÔÚÒƶ¯Îļþµ½Ð·ÖÇø"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "¿½±´ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "ɾ³ý %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "É豸: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ϵÄÅÌ·û: %s ( Ö»ÊDz²â )\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "ÀàÐÍ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ãû³Æ: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "¿ªÊ¼: µÚ %s ÉÈÇø\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "´óС: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", µÚ %s ÉÈÇø"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "µÚ %d ÖùÃæµ½µÚ %d ÖùÃæ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "ÒѸñʽ»¯\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "δ¸ñʽ»¯\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "ÒÑ×°ÔØ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "´ÅÅÌÕóÁÐ (RAID) md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"»Ø»·Îļþ:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ô¤ÉèµÄ¿ª»ú·ÖÇø\n"
-"    (¸ø MS-DOS ¿ª»ú³ÌÐòÓõÄ, ¸ú lilo ÎÞ¹Ø)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "¼¶±ð %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "×é¿é´óС %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID ´ÅÅÌ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "»Ø»·ÎļþÃû³Æ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"±¾·ÖÇøÊÇÇý¶¯·ÖÇø\n"
-"Çë²»Òª¸ü¸Ä.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"¸ÃÆô¶¯·ÖÇøÌرð\n"
-"ÊDZ£Áô¸øË«ÖØÆô¶¯ÏµÍ³\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "´óС: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ó²Å̲ÎÊý: %s ÖùÃæ, %s ´ÅÍ·, %s ÉÈÇø\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "ÐÅÏ¢: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM ´ÅÅÌ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "·ÖÇø±íÀàÐÍ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ÔÚ×ÜÏß %d id %d ÉÏ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Ñ¡Ïî: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Îļþϵͳ¿ÚÁî"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "ÇëÑ¡Ôñ¸ÃÎļþϵͳµÄ¿ÚÁî"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Õâ¸ö¿ÚÁîÌ«¼òµ¥ÁË (ÖÁÉÙÒªÓÐ %d ¸ö×Ö·û)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Á½´Î¿ÚÁî²»·û"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "¿ÚÁî"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "¿ÚÁî (ÔÙÒ»´Î)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "¸Ä±äÀàÐÍ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "ÇëÑ¡Ôñ½éÖÊ"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ·þÎñÆ÷"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s, ¸ñʽ»¯ %s ʧ°Ü"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "²»ÖªµÀÈçºÎ¸ñʽ»¯ %s ³É %s ÀàÐÍ"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ʧ°Ü, Í˳öÂë %d »ò ÐźŠ%d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "жÔØ %s ʧ°Ü: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "¼òµ¥"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "·þÎñÆ÷"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Äú²»ÄÜ°Ñ JFS ÓÃÓÚСÓÚ 16 MB µÄ·ÖÇø"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Äú²»ÄÜ°Ñ ReiserFS ÓÃÓÚСÓÚ 32 MB µÄ·ÖÇø"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "ÔØÈëµã±ØÐèÒªÒÔ / Ϊ¿ªÍ·"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "ÒѾ­ÓÐÒ»¸ö·ÖÇøµÄ×°ÔصãÊÇ %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "²»ÄÜÓÃLVMÂß¼­¾í×ö %s ÔØÈëµã"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Õâ¸öĿ¼Ӧ¸Ã±£ÁôÔÚ¸ù·ÖÇøÄÚ"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "Õâ¸ö¼ÓÔصãÐèÒªÒ»¸öÕæÕýµÄÎļþϵͳ(ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "²»ÄÜÓüӿÚÁîµÄÎļþϵͳ×ö %s ÔØÈëµã"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "ûÓÐ×ã¹»µÄ¿ÕÏпռ乩·ÖÅä"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "ÒÑÍê³É"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ÔÚ´ò¿ª %s дÈëʱ·¢Éú´íÎó: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"·¢Éú´íÎó! н¨ÎļþϵͳʱÕÒ²»µ½¿ÉÓõÄÉ豸¡£\n"
-"Çë¼ì²éÄúµÄÓ²¼þÒÔÈ·¶¨ÎÊÌâµÄÔ­Òò !"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "ÄúÏÖÔÚÒ»¸ö·ÖÇøҲûÓÐ!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ÊÇÒ»¸ö¶àÓû§ÏµÍ³, ÇëÔĶÁ \"Óû§ÊÖ²á\"\n"
-"µã»÷ \"½ÓÊÜ\", Ôö¼ÓÐÂÓû§, Ñ¡Ôñ \"½áÊø\", Íê³É\n"
-"µã»÷ \"¸ß¼¶\", Äã¿ÉÒÔÐÞ¸ÄÓû§µÄÃüÁî½âÊÍÆ÷ shell."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"ÒÔÉÏÊǼì²âµ½µÄLinux·ÖÇø. Äã¿ÉÒÔ²ÉÓ÷ÖÇøÏòµ¼´´½¨µÄ·ÖÇø,Èç¹ûÄãÒªÐÞ¸Ä, ÖÁÉٵö¨"
-"Òå\n"
-"root¸ù·ÖÇø(\"/\"). ·ÖÇø̫СµÄ»°, ¿ÉÄÜÎÞ·¨°²×°×ã¹»µÄÈí¼þ°ü.\n"
-"ÄãÒ²¿ÉÒÔ´´½¨\"/home\"·ÖÇøÀ´´æ·ÅÓû§Êý¾Ý.\n"
-"\n"
-"\n"
-"ÿ¸ö·ÖÇø°´ \"Ãû³Æ\",\"ÈÝÁ¿\"Áбí."
-
-#: ../../help.pm_.c:72
-#, fuzzy
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake°²×°ÐèÒªºÃ¼¸ÕÅCDROM. DrakeX\n"
-"»áÖªµÀÏàÓ¦µÄÈí¼þ°üÔÚÄÄÕÅCDROM, ²¢»áµ¯³öµ±Ç°CDÒªÇóÄã¸ü»»ÏàÓ¦µÄCD."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"ÏÖÔÚÊÇÖ¸¶¨°²×°³ÌÐòµÄʱºòÁË.\n"
-"\n"
-"³ÌÐò°²×°ÏàÓ¦µÄ×é·ÖÀàÓÐ:\n"
-"\n"
-"* \"¹¤×÷Õ¾\": °²×°¹¤×÷Õ¾×é.\n"
-"\n"
-"* \"¿ª·¢\": °²×°¿ª·¢ËùÐèµÄÏàÓ¦µÄ×é.\n"
-"\n"
-"* \"·þÎñÆ÷\": °²×°ÆÕͨ·þÎñÆ÷.\n"
-"\n"
-"* \"ͼÐλ·¾³\": °²×°Í¼Ðλ·¾³¹¤×÷Õ¾.\n"
-"\n"
-"Ñ¡ÖÐ\"µ¥¸öÈí¼þ°üÑ¡Ôñ\", Èç¹ûÄãÒªÊÖ¹¤¿ØÖÆÈí¼þ°üÑ¡Ôñ.\n"
-"\n"
-"\"Éý¼¶\"°²×°Ê±, Äã¿ÉÒÔÈ¡ÏûËùÓÐ×éµÄÑ¡Ôñ¶ø²»»á°²×°ÐµÄÈí¼þ°ü,\n"
-"ÓÃÓÚÐÞ¸´ÏµÍ³»òÉý¼¶ÏµÍ³."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"ÏÖÔÚÄú¿ÉÒÔÑ¡ÔñÔÚ¿ª»úʱÆô¶¯ÄÄЩ·þÎñ.\n"
-"\n"
-"\n"
-"Òƶ¯ÄúµÄÊó±êµ½Ñ¡ÏîÉÏÃæ»áµ¯³ö°ïÖúÌáʾ, ½âÊÍÕâ¸ö·þÎñµÄ×÷ÓÃ.\n"
-"\n"
-"\n"
-"Èç¹ûÄúµÄ»úÆ÷½«×÷Ϊ·þÎñÆ÷, ÔÚÕâÒ»²½Çë¸ñÍâСÐÄ: Çë²»ÒªÆô¶¯ÈκÎ\n"
-"Äú²»ÐèÒªµÄ·þÎñ. Çë×¢ÒâijЩ·þÎñ¶Ô·þÎñÆ÷ÓÐDZÔÚµÄΣÏÕ.ͨ³£, ֻѡÔñÄúȷʵҪʹÓõÄ"
-"ÄÇЩ·þÎñ."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Èç¹ûDrakXÎÞ·¨ÕÒµ½ºÏÊʵÄͼÐο¨, Äã¿ÉÔÚ\n"
-"\"¸Ä±äͼÐο¨\",Ñ¡Ôñ\"ÆäËü¿¨\", Ñ¡Ôñ\n"
-"\"FBDev\", È»ºóÔÙ²âÊÔ."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr "×îºó, Äã»á±»ÎÊÊÇ·ñ¿ª»ú½øÈëͼÐνçÃæ."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"ÕâÀï, ÄúÐèÒªÔÚÓ²ÅÌÉÏÑ¡ÔñÓÃÀ´°²×° Mandrake Linux ²Ù×÷ϵͳµÄλÖÃ.\n"
-"Èç¹û´ÅÅÌÊÇ¿ÕµÄ, »òÕßÏÖ´æµÄ²Ù×÷ϵͳʹÓÃÁË´ÅÅÌÉϵÄÈ«²¿¿Õ¼ä, ÄúÐèÒª\n"
-"½øÐзÖÇø. »ù±¾ÉÏ, ×öÓ²ÅÌ·ÖÇø¾ÍÊÇ°ÑËüÔÚÂß¼­ÉÏ»®·Ö³É²¿·Ö, \n"
-"ΪÄúа²×° Mandrake Linux ϵͳÁô³ö¿ÉÓÿռä.\n"
-"\n"
-"\n"
-"ÓÉÓÚ·ÖÇø¹ý³ÌµÄºó¹û¾­³£ÊDz»¿ÉÄæת\n"
-"Õâ¸öÏòµ¼³ÌÐò¼ò»¯ÁËÕâЩ¹ý³Ì, ÇëÄú²»±Ø׿±, ÔÚ¿ªÊ¼Ö®Ç°¶à¿´¿´ÊÖ²á.\n"
-"\n"
-"\n"
-"ÄúÐèÒª×îÉÙÁ½¸ö·ÖÇø.  Ò»¸öÊDzÙ×÷ϵͳ±¾ÉíʹÓÃ, \n"
-"ÁíÒ»¸öÓÃ×÷ÐéÄâÄÚ´æ( Ò²½Ð×ö Swap).\n"
-"\n"
-"\n"
-"Èç¹ûÊÂÏÈÒѾ­É趨 (À´×ÔÒÔÇ°µÄ°²×°»òÆäËü·ÖÇø¹¤¾ß), ÄúÖ»ÐèÒª´ÓÖÐÑ¡Ôñr\n"
-"ÓÃÄÄЩ°²×° Linux ϵͳ.\n"
-"\n"
-"\n"
-"Èç¹û·ÖÇøûÓÐÊÂÏȶ¨Òå, Äú¾ÍÒª×Ô¼º½¨Á¢ËüÃÇ. \n"
-"Äú¿ÉÒÔʹÓÃÉÏÊöµÄ·¨Ê¦. ¸ù¾ÝÄúµÄ´ÅÅ̵ÄÅäÖÃ, ¿ÉÄÜÓÐÕâЩ²»Í¬\n"
-"µÄ°ì·¨:\n"
-"\n"
-"* ʹÓÃÏÖÓеķÖÇø:  ·¨Ê¦ÔÚÄúµÄÓ²ÅÌÉϼì²âµ½ÁËÒ»¸ö»ò¸ü¶àLinux ·ÖÇø \n"
-" ÄúÏëÒª±£ÁôËüÃÇ, ¾ÍÑ¡ÔñÕâ¸öÑ¡Ïî. \n"
-"\n"
-"\n"
-"* Çå³ýÕû¸ö´ÅÅÌ: Èç¹ûÄúÏ£ÍûÇå³ý´ÅÅÌÉÏËùÓеķÖÇøºÍÊý¾Ý. ÒÔа²×°µÄ\n"
-"  Mandrake Linux ϵͳ´úÌæ, ¾Í²ÉÓÃÕâ¸öÑ¡Ïî.  ÇëСÐIJÉÓÃÕâ¸öÑ¡Ïî, \n"
-"  Ò»µ©È·ÈÏ, Äú¾ÍÎÞ·¨³·ÏúÄúµÄ¾ö¶¨..\n"
-"\n"
-"\n"
-"* ʹÓà Windows ·ÖÇøµÄ¿ÕÓà¿Õ¼ä: Èç¹ûÄúµÄÓ²ÅÌÉÏ °²×°ÓÐMicrosoft Windows \n"
-" ²¢ÇÒÕ¼ÓÃÁËÈ«²¿µÄ¿Õ¼ä, Äú±ØÐëΪ Linux ´´½¨ÐµķÖÇø, Äú¿ÉÒÔɾ³ýÕû¸ö\n"
-"  Microsoft Windows ·ÖÇøºÍÊý¾Ý(¼û \"Çå³ýÕû¸öÓ²ÅÌ\" »ò \"ר¼Òģʽ\"·½°¸), Ò²¿É"
-"ÒԸıä Microsoft Windows ·ÖÇøµÄ´óС. \n"
-" ¸Ä±ä´óС²»»áË𻵷ÖÇøÖеÄÊý¾Ý. ÎÒÃÇÍƼöÕâ¸ö·½·¨, Èç¹ûÄúÐèÒª\n"
-" ÔÚͬһ̨µçÄÔÉÏ Ê¹Óà Mandrake Linux ºÍ Microsoft Windows .\n"
-"\n"
-"\n"
-"  Ñ¡Ôñ֮ǰÇëÄúÀí½âÄúµÄ Microsoft  Windows ·ÖÇø½«±ÈÏÖÔÚËõСһЩ\n"
-" ÄúÔÚ Microsoft Windows Ï»ᷢÏÖ¿ÕÏеĴÅÅ̱äÉÙÁË. \n"
-"\n"
-"\n"
-"* ר¼Òģʽ: Èç¹ûÄúϲ»¶ÊÖ¹¤×öÓ²ÅÌ·ÖÇø, ¾ÍÑ¡ÔñÕâ¸öÑ¡Ïî.\n"
-"  ¿ªÊ¼Ö®Ç°Çë×Ðϸ¿¼ÂÇ.  Õâ¸ö·½·¨·Ç³£ÓÐÁ¦Ò²·Ç³£Î£ÏÕ.\n"
-"  Äú¿ÉÄÜÇáÒ׵ĻٻµËùÓеÄÊý¾Ý. Èç¹ûÄú²»Çå³þÇ벻ҪʹÓÃËü.."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"д´½¨µÄ·ÖÇø¶¼±ØÐë¸ñʽ»¯.\n"
-"\n"
-"\n"
-"ÄãÒ²¿ÉÒÔÓøñʽ»¯É¾³ý·ÖÇøÉϵÄÊý¾Ý.\n"
-"\n"
-"\n"
-"µã»÷\"È·ÈÏ\"¿ªÊ¼¸ñʽ»¯.\n"
-"\n"
-"\n"
-"µã»÷\"È¡Ïû\"Ñ¡ÔñÆäËû·ÖÇø°²×°Linux."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"ÄúµÄMandrake²Ù×÷ϵͳÕýÔÚ°²×°. °²×°½«»¨ºÃ¼¸·ÖÖÓ.\n"
-"(°²×°Ê±¼äÒÀ¾ÝÄúµÄ¼ÆËã»úËٶȺÍÄúËùÑ¡µÄ°²×°Èí¼þ°ü¶ø²»Í¬).\n"
-"\n"
-"\n"
-"ÇëÄÍÐĵȴý."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"ÕâÀï,ÄãÐèҪѡÔñ°²×°MandrakeµÄ·ÖÇø. Èç¹ûÊÇÒ»¸ö¿ÕÅÌ»òÕû¸öÅÌ°²×°Á˲Ù×÷ϵͳ, ÄãµÃ"
-"ÖØзÖÇø.\n"
-"\n"
-"\n"
-"´´½¨·ÖÇø,ÏÈÑ¡ÔñÓ²ÅÌ.\n"
-"\n"
-"\n"
-"   * Çå¿Õ: ɾ³ýÓ²ÅÌÉϵÄËùÓзÖÇø.\n"
-"\n"
-"\n"
-"   * ×Ô¶¯·ÖÅä: ×Ô¶¯·ÖÅä¿ÕÏпռä.\n"
-"\n"
-"\n"
-"   * »Ö¸´·ÖÇø±í: ÓÃÓÚÔÚ·ÖÇø±íËð»µÊ±, »Ö¸´·ÖÇø±í.\n"
-"\n"
-"\n"
-"   * È¡Ïû: È¡ÏûÐÞ¸Ä.\n"
-"\n"
-"\n"
-"   * ÖضÁ·ÖÇø±í: È¡ÏûËùÓÐÐÞ¸Ä, ÖضÁ·ÖÇø±í.\n"
-"\n"
-"\n"
-"   * ¾«Áé: ×Ô¶¯·ÖÅä.\n"
-"\n"
-"\n"
-"   * ´ÓÈíÅָ̻´: ´ÓÈíÅָ̻´ÒÔÇ°±£´æµÄ·ÖÇø±í.\n"
-"\n"
-"\n"
-"   * ±£´æ·ÖÇø±íµ½ÈíÅÌ: ±£´æ·ÖÇø±í.\n"
-"\n"
-"\n"
-"   * Íê³É: ½áÊø·ÖÇø.\n"
-"\n"
-"\n"
-"          * Ctrl-c ´´½¨Ð·ÖÇø.\n"
-"\n"
-"          * Ctrl-d ɾ³ý·ÖÇø.\n"
-"\n"
-"          * Ctrl-m ÉèÖÃÔØÈëµã.\n"
-"\n"
-"\n"
-"°²×°PPCʱ, ÄãÓ¦¸Ã´´½¨ÖÁÉÙ1MµÄHFS·ÖÇøÓÃÓÚ°²×°¿ª»ú³ÌÐò yaboot."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"·¢ÏÖÒ»¸ö»ò¶à¸öWindows·ÖÇø.\n"
-"Ñ¡ÔñÒ»¸ö·ÖÇø¸Ä±ä´óС,ÒԱ㰲װLinux.\n"
-"\n"
-"\n"
-"·ÖÇø°´ \"Linux Ãû³Æ\", \"Windows Ãû³Æ\", \"ÈÝÁ¿\"Áбí."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "ÇëÄÍÐĵȴý. ¸Ã²Ù×÷¿ÉÄÜ»¨ºÃ¼¸·ÖÖÓ."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ÏÖÔÚÐèÒªÖªµÀÄãÑ¡Ôñ(\"½¨Òé\")°²×°»¹ÊǸü¸ß¿ØÖƵÄ(\"ר¼Ò\").\n"
-"Ñ¡Ôñ \"°²×°\" Èç¹ûÔ­À´Ã»Óа²×° Mandrake Linux\n"
-"»òÕßÄúÏ£ÍûʹÓöà¸ö²Ù×÷ϵͳ.\n"
-"\n"
-"\n"
-"Ñ¡Ôñ\"Éý¼¶\", Èç¹ûÄúÏëÉý¼¶ÒÔÇ°°æ±¾µÄ Mandrake Linux.\n"
-"\n"
-"\n"
-"Äú¿ÉÒÔ¸ù¾Ý×Ô¼º¶Ô GNU/Linux Á˽âµÄ³Ì¶È, Ñ¡ÔñÏÂÁеݲװ¼¶±ð:\n"
-"\n"
-"* ½¨Òé:Èç¹ûÄú´ÓÀ´Ã»Óа²×°¹ýÈκΠGNU/Linux ²Ù×÷ϵͳ, ¾ÍÑ¡ÔñÕâ¸ö.\n"
-"  °²×°½«×Ô¶¯½øÐÐ, ·Ç³£¼òµ¥, ÄúÖ»ÐèÒª»Ø´ðºÜÉÙµÄÎÊÌâ.\n"
-"\n"
-"\n"
-"* ר¼Ò: Èç¹ûÄú¾«Í¨ GNU/Linux, Äú¿ÉÒÔÑ¡ÔñÕâ¸ö°²×°¼¶±ð,  \n"
-"¾ÍÏóÔÚ \" ¶¨ÖÆ\"°²×°ÖÐÒ»Ñù, Äú½«¿ÉÒÔÑ¡ÔñϵͳµÄÖ÷ÒªÓÃ; \n"
-" (¹¤×÷Õ¾, ·þÎñÆ÷»ò¿ª·¢Æ½Ì¨).  Çë·Ç³£Ð¡ÐĵÄʹÓÃÕâ¸ö¼¶±ð. \n"
-"  Äú½«¿ÉÒÔ¶¨ÖÆϵͳµÄºÜ¶à·½Ãæ.  Èç¹ûÄú¶Ô GNU/Linux ûÓкÜÉîÈë\n"
-" µÄÁ˽â, Äú½«ºÜÄѻشðijЩÎÊÌâ.\n"
-" ËùÒÔ, Èç¹ûÄú²»Çå³þ»á·¢Éúʲô, Ç벻ҪѡÔñÕâ¸ö¼¶±ð."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"ÇëÑ¡ÔñÕýÈ·µÄ¶Ë¿Ú.  ÀýÈç, \n"
-"MS Windows ÀïµÄ COM1, ÔÚ GNU/Linux ÀïÃæ½Ð×ö ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader µÄËõд) ºÍ Grub ÊÇ¿ª»úÆô¶¯³ÌÐò: ¿ª»úʱ, ËüÃÇ¿ÉÒÔÒýµ¼\n"
-"ÄúϵͳÀïµÄ GNU/Linux ºÍÆäËû²Ù×÷ϵͳ.  ͨ³£ËüÄÜÕýÈ·µÄ²ì¾õºÍ°²×°ÏÖÓеÄÆäËû\n"
-"²Ù×÷ϵͳ. Èç¹û²»ÊÇÕâÑù, Äú¿ÉÒÔÔÚÕâ¸ö½çÃæÊÖ¹¤Ìí¼ÓеÄÏîÄ¿. Çë×ÐϸѡÔñ\n"
-"ÕýÈ·µÄ²ÎÊý.\n"
-"\n"
-"\n"
-"Äú¿ÉÄܲ»Ï£ÍûÈÃÈËʹÓÃÕâÀïÁгöµÄÆäËû²Ù×÷ϵͳ, Ö»Òª°ÑÓйصÄÏîĿɾ³ý¾ÍºÃÁË.\n"
-"¿ÉÊÇÄúÐèÒªÏÈ×¼±¸¿ª»úÈíÅÌÀ´Òýµ¼ËüÃÇ."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"ÇëÖ¸¶¨ÔÚÄÄÀï·ÅÖÃÆô¶¯ GNU/Linux µÄÐÅÏ¢.\n"
-"\n"
-"Ñ¡Ôñ\"Ó²Å̵ĵÚÒ»¸öÉÈÇø (MBR)\", ³ý·ÇÄúÇå³þÆäËüÑ¡ÔñµÄºó¹û."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ½«Òª³¢ÊÔÑ°ÕÒ IDEÉ豸ºÍ PCI SCSI ¿¨. \n"
-"Èç¹û DrakX ÕÒµ½ÁË SCSI ¿¨²¢ÇÒÖªµÀ¸ÃʹÓÃÄĸöÇý¶¯³ÌÐò\n"
-"Ëü»á×Ô¶¯°²×°.\n"
-"\n"
-"Èç¹ûÄúûÓÐ SCSI ¿¨, »òÕßÓÐÒ»¸öISA SCSI ¿¨, »òÕßÓÐÒ»¸ö\n"
-" DrakX ²»ÈÏʶµÄ PCI SCSI ¿¨, ½«Ñ¯ÎÊÄúϵͳÖÐÊÇ·ñÓÐ\n"
-"SCSI. Èç¹ûûÓÐ, ÄúÖ»ÐèÑ¡Ôñ '·ñ'. \n"
-"Èç¹ûÄú»Ø´ð 'ÊÇ' ½«ÁгöһЩ¿É¹©Ñ¡ÔñµÄÇý¶¯³ÌÐò, \n"
-"ÄúÒª´ÓÖÐÌôÑ¡ÄúµÄ¿¨¿ÉÒÔʹÓõÄÇý¶¯³ÌÐò.\n"
-"\n"
-"\n"
-"Èç¹ûÄú²»µÃ²»ÊÖ¹¤ÌôÑ¡Çý¶¯³ÌÐò, DrakX ½«ÌáÎÊl\n"
-"ÄúÊÇ·ñÒªÖ¸¶¨ÌرðµÄ²ÎÊý.  Äú×îºÃÈà DrakX ȥ̽²âÓ²¼þ\n"
-"ÒÔÈ·¶¨²ÎÊý. Õâ¸ö°ì·¨Í¨³£¿ÉÒÔ×àЧ.\n"
-"\n"
-"Èç¹û²»³É, ÄúÖ»ºÃ×Ô¼ºÌṩÇý¶¯³ÌÐò²ÎÊý.\n"
-"Çë²é¿´ 'Óû§Ö¸ÄÏ', (µÚÈýÕÂ, Collective informations on your hardware)\n"
-"ÄÇÀïÌṩÁËһЩ»ñÈ¡ÓйØÐÅÏ¢µÄ·½·¨, Èç²é¿´Ó²¼þÎĵµ,\n"
-" ä¯ÀÀÖÆÔìÉ̵ÄÍøÕ¾ (Èç¹ûÄúÓа취ÉÏÍø)\n"
-"»ò´Ó Windows ÖлñÈ¡ÓйصÄÐÅÏ¢ (Èç¹ûÄúµÄϵͳÖÐÓÐWindows)"
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr "Äã¿ÉÒÔÊäÈëYabootµÄ¸½¼ÓÐÅÏ¢."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"YabootÊÇ NewWorld MacIntoshµÄ¿ª»úÒýµ¼ÏµÍ³, ¿ÉÒÔÒýµ¼ GNU/Linux, MacOS, ºÍ "
-"MacOSX.\n"
-"\n"
-"\n"
-"YabootÖ÷ҪѡÏî:\n"
-"\n"
-"\n"
-"  - ³õʼÐÅÏ¢: ¿ª»úÒýµ¼ÐÅÏ¢.\n"
-"\n"
-"\n"
-"  - Òýµ¼É豸: ¿ª»ú³ÌÐò°²×°µØ.\n"
-"\n"
-"\n"
-"  - ¹Ì¼þÑÓ³Ù: yabootµÄ¿ª»úÑÓ³ÙÖ®Ò».\n"
-"\n"
-"\n"
-"  - ºËÐÄÒýµ¼ÑÓ³Ù: ºËÐÄÒýµ¼ÑÓ³Ù.\n"
-"\n"
-"\n"
-"  - ʹÄÜCDÒýµ¼?: 'C' CDÒýµ¼.\n"
-"  - ʹÄÜOFÒýµ¼?: 'N' ¹Ì¼þÒýµ¼.\n"
-"  - È´Ê¡²Ù×÷ϵͳ: ¹Ì¼þÈ´Ê¡Òýµ¼µÄ²Ù×÷ϵͳ."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Ñ¡ÔñÓ²ÅÌÄú×¼±¸Çå¿ÕÀ´°²×° Mandrake·ÖÇø.\n"
-"×¢Ò⣬ËùÓÐÊý¾Ý½«¶ªÊ§²¢ÇÒÎÞ·¨»Ö¸´."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"µã»÷ \"È·¶¨\"ɾ³ý¸ÃÓ²ÅÌËùÓÐÊý¾Ý¼°·ÖÇø.\n"
-"×¢Ò⣬µã»÷ \"È·¶¨\"ºó£¬Äú½«ÎÞ·¨»Ö¸´Êý¾Ý¼°·ÖÇø(°üÀ¨WindowsÊý¾Ý).\n"
-"\n"
-"\n"
-"µã»÷ \"È¡Ïû\"È¡Ïû²Ù×÷£¬Êý¾Ý¼°·ÖÇø²»»á¶ªÊ§."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"ÄúÑ¡ÔñÁËÒÔÏ·þÎñ³ÌÐò: %s\n"
-"\n"
-"\n"
-"ÕâЩ·þÎñÈ´Ê¡»á±»¼¤»î¡£ËüÃÇûÓÐÒÑÖªµÄ°²È«ÎÊÌ⣬µ«¿ÉÄÜ»áз¢ÏÖ¡£\n"
-"Èç¹û·¢ÏÖ£¬ÄãµÃÁ¢¼´Éý¼¶.\n"
-"\n"
-"\n"
-"¹ûÕæ°²×°ÕâЩ·þÎñ?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "ûÓÐNISÓò£¬ ÎÞ·¨Ê¹Óù㲥"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Çë²åÈëÒ»ÕÅDOSÈíÅ̵½Çý¶¯Æ÷ %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "²»ÊÇDOS¸ñʽµÄÈíÅÌ"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr "ʹÓñ£´æµÄÈí¼þ°üÑ¡Ôñ, ÒÔ''linux defcfg=floppy''Æô¶¯"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "ÇëÈ¡Îļþ %s ³ö´í "
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"ÄúϵͳÖеIJ¿·ÖÓ²¼þÐèÒª 'רÓÐ' µÄÇý¶¯³ÌÐò²ÅÄܹ¤×÷. \n"
-"ÓйØËüÃǵÄÇé¿ö, ÇëÄú²é¿´: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"±ØÐëÖ¸¶¨Ò»¸ö¸ù·ÖÇø.\n"
-"ÇëÏÈ´´½¨Ò»¸ö Linux ·ÖÇø (»òÔÚͼÖеã»÷ÏÖÓеÄÒ»¸ö).\n"
-"È»ºóÔÚÁбíÀïÑ¡Ôñ \"×°Ôصã\", ÉèΪ '/'."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Äú±ØÐëÓÐÒ»¸ö½»»»·ÖÇø"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Äú»¹Ã»Óн»»»·ÖÇø\n"
-"\n"
-"Òª¼ÌÐøÂð?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Äú±ØÐëÓÐÒ»¸öFAT·ÖÇø ÔØÈë /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "ʹÓÿÕÏпռä"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "ûÓÐ×ã¹»¿ÕÏпռä·ÖÅä¸øзÖÇø"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "ʹÓÃÏÖ´æµÄ·ÖÇø"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "ÏÖ´æµÄ·ÖÇøÎÞ·¨Ê¹ÓÃ"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "ÀûÓà Windows ·ÖÇø½øÐлØËÍ"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ÇëÎÊÄúÒªÔÚÄÄÒ»¸ö·ÖÇøÀï·Å Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Ñ¡Ôñ´óС"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "¸ù·ÖÇø´óС(MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "½»»»·ÖÇø´óС (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "ʹÓÃÔÚ Windows ·ÖÇøÉϵĿÕÏпռä"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "ÄúÐèÒª¸Ä±äÄĸö·ÖÇøµÄ´óС?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "¼ÆËã Windows ÎļþϵͳµÄ±ß½ç"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"¸Ä±ä FAT ·ÖÇø´óСµÄ³ÌÐòÎÞ·¨´¦ÀíÕâ¸ö·ÖÇø, \n"
-"·¢ÉúÁËÈçÏ´íÎó: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "ÄúµÄ Windows ·ÖÇøÓÐÌ«¶àËéƬ, ÇëÏÈÔËÐÐ ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"¾¯¸æ!\n"
-"\n"
-"DrakX ÏÖÔÚÒªµ÷ÕûÄúµÄ Windows ·ÖÇøµÄ´óС. ΪÁË°²È«, ÄúÓ¦¸ÃÏÈÔÚ Windows ÏÂÔË\n"
-"ÐÐ scandisk, ²¢¸ù¾ÝÐèÒªÔËÐÐ defreg. ÏÖÔÚÄú¿ÉÒÔÍ˳ö Linux °²×°È¥×öÕâЩ\n"
-"×¼±¸, È»ºóÖØпªÊ¼°²×°.\n"
-"Ò»ÇоÍÐ÷ºó, Çë°´ \"È·¶¨\"."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Äú½«±£Áô¶àÉÙ¿Õ¼ä¸ø windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "·ÖÇø %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "×Ô¶¯µ÷Õû´óСʧ°Ü: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "ûÓпÉÒÔµ÷Õû´óС»òÕßÓÃ×÷»Ø»·µÄ FAT ·ÖÇø (»òÕßûÓÐ×㹻ʣÓà¿Õ¼ä)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Çå³ýÕû¸ö´ÅÅÌ"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "ɾ³ý Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "ÄúÓв»Ö»Ò»¸öÓ²ÅÌ, ÄúÒªÔÚÄĸöÉÏÃæ°²×° Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "´ÅÅÌ %s ÉÏÏÖ´æµÄËùÓзÖÇø¼°Æä×ÊÁϽ«±»Çå³ý"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "¶¨ÖÆ·ÖÇø"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "ʹÓà fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"ÄúÏÖÔÚ¿ÉÒÔÔÚ %s ÉÏ×ö·ÖÇø\n"
-"×öÍêÖ®ºó, ²»ÒªÍü¼ÇÓà `w' ÃüÁî±£´æÄúµÄÐÞ¸Ä"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "ÔÚ Windows ·ÖÇøÉÏûÓÐ×ã¹»µÄ¿ÕÏпռä"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "ÎÒÎÞ·¨ÕÒµ½°²×°ÐèÒªµÄ¿Õ¼ä"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX ·ÖÇø´óʦ½¨ÒéÕâЩ½â¾ö°ì·¨:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "·ÖÇøʧ°Ü: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "ÍøÂçÕýÔÚÆô¶¯"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "ÕýÔÚ½ûÓÃÍøÂ繦ÄÜ"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"·¢Éú´íÎó, ¿ÉÊÇÎÒ²»ÖªµÀ¸ÃÔõÑù´¦Àí²ÅºÃ.\n"
-"¼ÌÐøÏÂÈ¥»áÔõÑù¾Í¿´ÄúµÄÔËÆøÁË."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Öظ´µÄ×°Ôصã %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"һЩÖØÒªÈí¼þ°üûÓÐÕýÈ·µÄ°²×°. ÄúµÄ¹âÅÌ»òÕßÇý¶¯Æ÷¿ÉÄÜÓÐȱÏÝ.\n"
-"ÇëÔÚһ̨°²×°ºÃµÄµçÄÔÉϼì²é¹âÅÌ, ÃüÁîÊÇ\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "»¶Ó­À´µ½ %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "ûÓпÉÓõÄÈíÅÌÇý¶¯Æ÷."
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "½øÈë²½Öè `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"ÄúµÄϵͳ×ÊÔ´²»×ã.  ÄúÔÚ°²×° Mandrake Linux ʱ¿ÉÄÜÓöµ½ÎÊÌâ.\n"
-"Èç¹ûÕâÑù, Äú¿ÉÒÔ³¢ÊÔÎı¾Ä£Ê½µÄ°²×°. \n"
-"ÔÚ´Ó¹âÅÌÆô¶¯ºó°´ 'F1' ¼ü, È»ºóÊäÈë 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "°²×°Àà±ð"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Çë´ÓÏÂÁа²×°Àà±ðÀïÑ¡ÔñÒ»¸ö:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "±»Ñ¡ÔñµÄ×é¼þ°²×°ËùÐèÓ²ÅÌ¿Õ¼äԼΪ %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Èç¹ûÄúÏëʹÓøüÉٵĿռäÀ´°²×°, \n"
-"Çë¾ö¶¨°²×°ÒѾ­Ñ¡¶¨µÄÈí¼þ°üµÄ°Ù·Ö±È?\n"
-"\n"
-"Ñ¡Ôñ½ÏµÍµÄ°Ù·Ö±È¾ÍÖ»°²×°×îÖØÒªµÄÈí¼þ; Ñ¡Ôñ 100 %% ¾Í°²×°ËùÑ¡µÄ\n"
-"È«²¿Èí¼þ."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"ÄúµÄ´ÅÅÌ¿Õ¼äÖ»¹»°²×°ËùÓÐÕâЩÈí¼þ°üµÄ %d%%.\n"
-"Èç¹ûÄúÏëÉÙ°²×°Ò»Ð©, \n"
-"Çë¾ö¶¨°²×°ÒѾ­Ñ¡¶¨µÄÈí¼þ°üµÄ°Ù·ÖÖ®¼¸?\n"
-"\n"
-"Ñ¡Ôñ½ÏµÍµÄ°Ù·Ö±È¾ÍÖ»°²×°×îÖØÒªµÄÈí¼þ; Ñ¡Ôñ %d%% ¾Í°²×°ËùÑ¡µÄ\n"
-"È«²¿Èí¼þ."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "ÔÚÏÂÒ»¸ö²½ÖèÄú½«¿ÉÒÔ¸ü×ÐϸµÄÑ¡Ôñ"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Òª°²×°Èí¼þ°üµÄ°Ù·Ö±È"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "³ÌÐò×éÑ¡Ôñ"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Ñ¡Ôñµ¥¸öÈí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "×ܹ²´óС:  %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "ÓдíµÄÈí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ãû³Æ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "°æ±¾: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "´óС: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "ÖØÒªÐÔ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Äú²»¿ÉÒÔÑ¡ÔñÕâ¸öÈí¼þ°ü. ûÓÐ×ã¹»¿Õ¼ä°²×°Ëü."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "ÏÂÁÐÈí¼þ°ü½«Òª±»°²×°"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "ÏÂÁÐÈí¼þ°ü½«Òª±»Ð¶ÔØ"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Äú²»ÄܸıäÕâ¸öÈí¼þ°üµÄÑ¡¶¨"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Õâ¸öÈí¼þ°üÊDZØÐèµÄ, ²»ÄÜÈ¡ÏûÑ¡¶¨"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Äú²»¿ÉÒÔÈ¡ÏûÑ¡ÔñÕâ¸öÈí¼þ°ü. ËüÒѾ­°²×°¹ýÁË."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Õâ¸öÈí¼þ°ü±ØÐë½øÐÐÉý¼¶.\n"
-"ÄúÕæµÄҪɾ³ýËüÂð?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Äú²»Äܲ»Ñ¡ÔñÕâ¸öÈí¼þ°ü, Ëü±ØÐëÉý¼¶"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "ÏÔʾ×Ô¶¯Ñ¡ÖеÄÈí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "°²×°"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "ÈíÅÌÔØÈë/±£´æ"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "¸üÐÂÈí¼þ°üÑ¡Ôñ"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "×îС°²×°"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Ñ¡ÔñÄúÒª°²×°µÄÈí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "ÕýÔÚ°²×°"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "ÕýÔÚ¹À¼Æ"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Ê£Óàʱ¼ä"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "ÕýÔÚ×¼±¸°²×°"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d Èí¼þ°ü"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "ÕýÔÚ°²×°³ÌÐò %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "½ÓÊÜ"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "¾Ü¾ø"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Çë»»ÁíһƬ¹âÅÌ!\n"
-"\n"
-"ÇëÔÚÇý¶¯Æ÷ÖвåÈë±êÓÐ \"%s\" µÄ¹âÅÌ, È»ºóµã»÷ 'È·¶¨'.\n"
-"Èç¹ûÄúûÓÐÕâÕŹâÅÌ, Çëµã»÷ 'È¡Ïû', ·ÅÆú°²×°Õâ¸ö¹âÅÌÉϵÄÈí¼þ."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "ÕæµÄÒª¼ÌÐø"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "ÅÅÁÐÈí¼þ°üʱ³ö´í"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "°²×°Èí¼þ°üʱ³ö´í:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"¾¯¸æ\n"
-"\n"
-"Çë×ÐϸÔĶÁÏÂÁеÄÌõ¿î. Èç¹ûÄú²»Í¬ÒâÆäÖÐÈκβ¿·Ö, Äú¾Í²»¿ÉÒÔ°²×°ÏÂÒ»¸ö\n"
-"¹âÅÌÉϵÄÈí¼þ. Ñ¡Ôñ '¾Ü¾ø' \n"
-"½«¼ÌÐø°²×°ÆäËû½éÖÊÉϵÄÈí¼þ.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "·¢ÉúÒ»¸ö´íÎó"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "ÄúÈ·¶¨Í˳ö°²×°³ÌÐòÂð? "
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Ðí¿ÉЭÒé"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "¼üÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "ÇëÑ¡ÔñÄúʹÓõļüÅ̲¼¾Ö."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "¼üÅÌÇåµ¥"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "ÄúÏëÒª×öʲôÀà±ðµÄ°²×°?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "°²×°/Éý¼¶"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Òª°²×°ÐÂϵͳ»¹ÊÇÉý¼¶Ô­ÓÐϵͳ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "ÍƼö"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "ר¼Ò"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Éý¼¶"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Ö»¸üÐÂÈí¼þ°ü"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "ÇëÑ¡ÔñÄúµÄÊó±êÀàÐÍ."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Êó±ê¶Ë¿Ú"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "ÇëÑ¡ÔñÄúµÄÊó±êÊÇÁ¬½Óµ½ÄǸö´®ÐÐ¿Ú ?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Êó±ê¼üÄ£Äâ"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "2¼üÄ£Äâ"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "3¼üÄ£Äâ"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "ÅäÖà PCMCIA ¿¨"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "ÕýÔÚÅäÖÃ IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ûÓпÉÓõÄÓ²ÅÌ·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "ÕýÔÚɨÃè¸÷¸ö·ÖÇøÒÔÑ°ÕÒ×°Ôصã"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Ñ¡Ôñ×°Ôصã"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"ÎÒÎÞ·¨¶ÁÈ¡ÄúµÄ·ÖÇø±í, Õâ¸ö·ÖÇø±íÆÆ»µµÃÌ«ÑÏÖØÁË :(\n"
-"ÎÒ¿ÉÒÔ³¢ÊÔÇå³ý»µ·ÖÇø (ËùÓеÄÊý¾Ý½«±»Çå³ý!)\n"
-"ÁíÍâÒ»¸ö½â¾ö°ì·¨ÊǽûÖ¹ DrakX Ð޸ķÖÇø±í.\n"
-"(´íÎóÊÇ %s)\n"
-"\n"
-"ÄúͬÒâÇå³ýËùÓзÖÇøÂð?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ÎÞ·¨ÕýÈ·¶Á³ö·ÖÇø±íµÄÄÚÈÝ.\n"
-"¼ÌÐøÏÂÈ¥»áÔõÑù¾Í¿´ÄúµÄÔËÆøÁË!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"ÎÞ·¨´´½¨¿ª»úÆô¶¯¿Õ¼ä(1MB)! °²×°½«¼ÌÐø, µ«ÈçÐèÆô¶¯ÏµÍ³, Äú¿ÉÓÃDiskDrake´´½¨Æô"
-"¶¯·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Éý¼¶Ã»ÓÐÕÒµ½¸ùĿ¼·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "¸ùĿ¼·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "ÄúµÄ¸ùĿ¼·ÖÇø(/)ÊÇÄÄÒ»¸ö ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Äú½«ÐèÒªÖØÐÂÆô¶¯Ê¹¸Ä±äÉúЧ"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "ÇëÑ¡ÔñÄúÒª¸ñʽ»¯µÄ·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "ÊÇ·ñ¼ì²é»µ´Å¿é?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "ÕýÔÚ¸ñʽ»¯¸÷¸ö·ÖÇø"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "ÕýÔÚ´´½¨ºÍ¸ñʽ»¯Îļþ %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "½»»»ÇøÌ«ÉÙ, ÎÞ·¨Íê³É°²×°, ÇëÔö¼Ó½»»»·ÖÇø."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ñ°ÕÒ¿É°²×°µÄ³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ñ°ÕÒ¿ÉÉý¼¶µÄ³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "ÄúµÄϵͳËùÊ£ÓàµÄ¿Õ¼ä²»¹»½øÐа²×°»òÉý¼¶ (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Íê³É (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "×îÉÙ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "½¨Òé (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"ÇëÔÚÈíÅÌÔØÈë»ò±£´æÈí¼þ°üÑ¡ÔñÐÅÏ¢.\n"
-"¸ñʽÓëauto_installÉú³ÉµÄÈíÅÌÒ»Ñù"
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "´ÓÈíÅÌÔØÈë"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Õý´ÓÈíÅÌÔØÈë"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Èí¼þ°üÑ¡Ôñ"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Çë²åÈëÈí¼þ°üÑ¡ÔñÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "±£´æÈëÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "ËùÑ¡³¬¹ý¿ÉÓÿռä"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr "ÄúûÓÐÑ¡ÔñÈκεÄ×é¼þ, ÇëÑ¡Ôñ×îС°²×°"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "°²×° X Window ϵͳ"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "°²×°»ù´¡Îĵµ (½¨Òé)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "×îС°²×° (ÎÞ°ü¹ÜÀí¹¤¾ß)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Èç¹ûÄúÓµÓÐÏÂÁÐËùÓеĹâÅÌ, µã»÷ È·ÈÏ.\n"
-"Èç¹ûÄúûÓÐÈκÎÒ»ÕÅ, µã»÷ È¡Ïû.\n"
-"Èç¹ûÄúֻȱÆäÖÐһЩ, ²»Ñ¡ÖÐËü, È»ºóµã»÷ È·ÈÏ."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "±êºÅ %s µÄCD-ROM "
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "ÕýÔÚ×¼±¸°²×°"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"ÕýÔÚ°²×°Èí¼þ°ü %s \n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "°²×°ºóµÄÅäÖÃ"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Çë²åÈëÒ»ÕÅÆô¶¯ÈíÅ̵½Çý¶¯Æ÷ %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ÇëÔÚÇý¶¯Æ÷ %s ÖвåÈëÒ»ÕŸüÐÂÄ£¿éÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"ÏÖÔÚÄúÒª¾ö¶¨ÊÇ·ñÏÂÔØÓÃÓÚ¼ÓÃܵÄÈí¼þ°ü.\n"
-"\n"
-"¾¯¸æ!\n"
-"\n"
-"ÔÚ²»Í¬µÄ·¨ÂÉÖƶÈÖÐ, ÊÊÓÃÓÚÕâЩÈí¼þµÄÒ»°ãÒªÇóºÍÇ¿ÖƽûÁîÓкܴó²»Í¬. \n"
-"¿Í»§ºÍ/»ò×îÖÕÓû§±ØÐëÇå³þµÄÁ˽âËùÔÚ¹ú¼ÒµÄ·¨ÂÉÊÇ·ñÔÊÐí×Ô¼ºÏÂÔØ, ±£´æ, ºÍ/»ò\n"
-"ʹÓÃÕâЩÈí¼þ.\n"
-"\n"
-"ÁíÍâ, ¿Í»§ºÍ/»ò×îÖÕÓû§±ØÐëÇå³þ, ²»µÃÎ¥·´ËùÔÚ¹ú¼ÒµÄ·¨ÂÉ. Î¥·´ÓйØÊÊÓ÷¨Âɽû"
-"Áî\n"
-"µÄºó¹û, ¿ÉÄÜÊÇÊܵ½ÑÏÀ÷µÄ³Í·£.\n"
-"\n"
-"¿Í»§ºÍ/»ò×îÖÕÓû§ÔÚͬÒâÇ©ÊðÏÂÁÐЭÒéÖ®ºó, ²»ÂÛºÎÖÖÇé¿ö, Mandrakesoft, ÒÔ¼°Æä\n"
-"ÖÆÔìÉ̺;­ÏúÉÌ, ²»³Ðµ£ÈκÎÔðÈÎ, ¼´Ê¹¿Í»§ºÍ/»ò×îÖÕÓû§ÒòÏÂÔØ, ÓµÓкÍ/»òʹÓÃ\n"
-"ÕâЩÈí¼þ¶øÔâÊÜÈκÎÌض¨µÄ, ¼ä½ÓµÄ»ò¸½´øµÄË𺦠(°üÀ¨, µ«²»ÏÞÓÚÀûÈóµÄËðʧ, Éú"
-"Òâ\n"
-"µÄÖжÏ, ¹Ø¼üÊý¾ÝµÄ¶ªÊ§¼°ÆäËû²ÆÎïËðʧ, ºÍ¿ÉÄÜÓÉ·¨ÔºÅоö²úÉúµÄÕ®ÎñºÍÅâ³¥).\n"
-"\n"
-"\n"
-"¶ÔÓÚÏÂÁÐЭÒéµÄÈκÎÒÉÎÊ, ÇëÁªÏµ\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Çë·ÃÎÊ Mandrake Linux ÍøÕ¾ÒÔ»ñµÃ¾µÏñÍøÕ¾Áбí"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Ñ¡ÔñÒ»¸ö¾µÏóÍøÕ¾À´È¡µÃ³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Á¬½Ó¾µÏóÍøÕ¾ÒÔÈ¡µÃ¿É¹©°²×°³ÌÐòµÄÁбí"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Äú´¦ÔÚµÄʱÇø?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "ÄúµÄϵͳʱÖÓÉ趨Ϊ GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "×Ô¶¯Ê±¼äͬ²½(ʹÓÃNTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ·þÎñÆ÷"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Ô¶³Ì CUPS ·þÎñÆ÷"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "ûÓдòÓ¡»ú"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "ÄúÓÐÆäËûµÄÂð ?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "¸ÅÒª"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Êó±ê"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "ʱÇø"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "´òÓ¡»ú"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ÄÚÖà ISDN ¿¨"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Éù¿¨"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV ¿¨"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "ʹÓÃNIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "±¾»úÎļþ"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "³¬¼¶Óû§¿ÚÁî"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "ûÓпÚÁî"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Õâ¸ö¿ÚÁîÌ«¼òµ¥ÁË (ÖÁÉÙÒªÓÐ %d ¸ö×Ö·û)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "ÈÏÖ¤"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP ÈÏÖ¤"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP »ù±¾Ä¿Â¼Ãû dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP ·þÎñÆ÷"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS ÈÏÖ¤"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS ÍøÓò"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ·þÎñÆ÷"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"¶¨ÖƵĿª»úÈíÅÌÈÃÄúÄܲ»ÒÀÀµ³£¹æµÄ¿ª»úÒýµ¼³ÌÐò¶øÖ±½ÓÆô¶¯ÄúµÄ Linux ϵͳ.\n"
-"Èç¹ûÄú²»Ïë°²×° SILO, »òÕßÆäËû²Ù×÷ϵͳ°Ñ SILO ɾ³ýÁË, »òÕß\n"
-" SILO ÔÚÄúµÄÓ²¼þÉϲ»Äܹ¤×÷, ÄÇôÕâ¾ÍºÜÓÐÓô¦ÁË. \n"
-"¿ª»úÈíÅÌ»¹¿ÉÒÔºÍ Mandrake ÐÞ¸´ÅÌÅäºÏʹÓÃ, °ïÖúÄú¸üÇáËɵĻָ´ÑÏÖعÊÕϵÄϵͳ.\n"
-"ÏÖÔھ͸øÄúµÄϵͳ×öÒ»ÕÅ¿ª»úÈíÅÌ, ºÃÂð? \n"
-"ÔÚµÚÒ»¸öÈíÅÌÇý¶¯Æ÷Àï·ÅһƬÈíÅÌ, È»ºó°´\"È·¶¨\""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "µÚÒ»¸öÈíÅÌÇý¶¯Æ÷"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "µÚ¶þ¸öÈíÅÌÇý¶¯Æ÷"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "ÂÔ¹ý"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"¶¨ÖƵĿª»úÈíÅÌÈÃÄúÄܲ»ÒÀÀµ³£¹æµÄ¿ª»úÒýµ¼³ÌÐò¶øÖ±½ÓÆô¶¯ÄúµÄ Linux ϵͳ.\n"
-"Èç¹ûÄú²»Ïë°²×° LILO (»ò grub), »òÕßÆäËû²Ù×÷ϵͳ°Ñ LILO ɾ³ýÁË, »òÕß\n"
-" LILO ÔÚÄúµÄÓ²¼þÉϲ»Äܹ¤×÷, ÄÇôÕâ¾ÍºÜÓÐÓô¦ÁË. \n"
-"¿ª»úÈíÅÌ»¹¿ÉÒÔºÍ Mandrake ÐÞ¸´ÅÌÅäºÏʹÓÃ, °ïÖúÄú¸üÇáËɵĻָ´ÑÏÖعÊÕϵÄϵͳ.\n"
-"ÏÖÔھ͸øÄúµÄϵͳ×öÒ»ÕÅ¿ª»úÈíÅÌ, ºÃÂð?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "±§Ç¸£¬Ã»ÓпÉÓõÄÈíÅÌ»ú"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Ñ¡ÔñÄúÒªÖÆ×÷¿ª»úÈíÅ̵ÄÈíÅÌ»ú"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Çë²åÈëÒ»ÕÅÈíÅ̵½Çý¶¯Æ÷ %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "ÕýÔÚÖÆ×÷¿ª»úÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "×¼±¸¿ª»úÒýµ¼³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"ÄãºÃÏñÓõÄÊǸöÀϵôÑÀ»ò²»ÈÏʶµÄ»úÆ÷,\n"
-"yabootÎÞ·¨¿ª»úÆô¶¯.\n"
-"°²×°¼ÌÐø, ÄãµÃʹÓÃBootXÆô¶¯"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "ÄúҪʹÓà aboot Âð?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"°²×° aboot ʱ³ö´í, \n"
-"Ç¿ÆÈ°²×°»á»Ù»µµÚÒ»¸ö·ÖÇø, Òª¼ÌÐøÂð?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "°²×°Òýµ¼³ÌÐò"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "°²×°ÏµÍ³Òýµ¼³ÌÐòʧ°Ü£¬³öÏÖÏÂÁдíÎó:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Äã¿ÉÄܵøıä¹Ì¼þÒýµ¼É豸À´Ê¹ÄÜ¿ª»úÒýµ¼³ÌÐò.\n"
-"Èç¹û¿ª»úʱûÓÐÒýµ¼³ÌÐòÌáʾ, °´Command-Option-O-FÈ»ºóÊäÈë:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" È»ºóÊäÈë: shut-down\n"
-"Ä㽫ÔÚÏ´οª»úʱ¿´µ½Òýµ¼³ÌÐòÌáʾ."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ÇëÔÚÇý¶¯Æ÷ %s ÖвåÈëÒ»ÕÅ¿Õ°×ÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "ÕýÔÚ´´½¨×Ô¶¯°²×°ÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"ijЩ²½ÖèûÓÐÍê³É.\n"
-"\n"
-"ÄúÈ·ÐÅÒªÏÖÔÚÍ˳öÂð?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"¹§Ï². °²×°Íê³ÉÁË.\n"
-"È¡³ö¿ª»úµÄ¹âÅÌ»òÈíÅÌ, È»ºó°´ ENTER, ÖØÐÂÆô¶¯ÄúµÄϵͳ.\n"
-"\n"
-"\n"
-"ÒªÁ˽â Mandrake Linux µÄÐ޸ĺ͸üÐÂ,\n"
-"Çë·ÃÎÊÎÒÃǵÄÍøÕ¾ \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"¹ØÓÚÈçºÎÅäÖÃÄúµÄϵͳ, Çë²é¿´ Mandrake Linux Óû§ÊÖ²á."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "ÕýÔÚ´´½¨×Ô¶¯°²×°ÈíÅÌ"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr "×Ô¶¯°²×°ÄÜÈ«×Ô¶¯´¦ÀíÓ²ÅÌ°²×°, Äã¿ÉÄÜÔ¸ÒâÖØÏÖ°²×°.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "×Ô¶¯"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "ÖØÏÖ"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "±£´æÈí¼þ°üÑ¡Ôñ"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux °²×° %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> ÔÚÏîÄ¿¼äÒƶ¯  |  <Space> Ñ¡Ôñ  |  <F12> ϸö»­Ãæ  "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ȱÉÙkdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Ñ¡ÔñÎļþ"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "¸ß¼¶"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "»ù±¾"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "ÇëÉÔºò"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "ÐÅÏ¢"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Õ¹¿ª·ÖÀàÊ÷"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "ÊÕËõ·ÖÀàÊ÷"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Çл»Æ½ÆÌ»ò·Ö×éÅÅÁÐ"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "´íÎóµÄÑ¡Ôñ£¬ÇëÖØÊÔ\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "ÄúµÄÑ¡Ôñ ? (ȱʡ %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "ÄúµÄÑ¡Ôñ ? (0/1, ȱʡ %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "°´Å¥: %s : %s"
-
-#
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "ÄúÏ£Íûµã»÷´Ë°´Å¥Âð?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "ÄúµÄÑ¡Ôñ ? (ȱʡ `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, fuzzy, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Äú¿ÉÒÔ´Ó (%s) Ñ¡Ôñ."
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> ×¢Òâ, ±êÇ©±»¸ü¸Ä:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "ÖØÐÂÌá½»"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "½Ý¿Ë (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "µÂ¹ú"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Î÷°àÑÀ"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "·ÒÀ¼"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "·¨¹ú"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "ŲÍþ"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "²¨À¼"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "¶í¹ú"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "ÈðµäÓï"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Ó¢¹ú"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "ÃÀ¹ú¼üÅÌ"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "°¢¶û°ÍÄáÑÇ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "ÃÀ¹ú (ÀÏʽ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "ÃÀ¹ú (´ò×Ö)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "ÃÀ¹ú (Òô±ê)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "±ÈÀûʱ"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "±£¼ÓÀûÑÇ (Òô±ê)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "±£¼ÓÀûÑÇ (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "°ÍÎ÷ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "°×¶íÂÞ˹"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "ÈðÊ¿ (µÂÓï²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "ÈðÊ¿ (·¨Óï²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "½Ý¿Ë (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "µÂ¹ú (ûÓÐdead keys)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "µ¤Âó"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedish)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "°£Ë¹ÍÐÄáÑÇ"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "¸ñ³¼ªÑÇ(\"¶íÓï\"²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "¸ñ³¼ªÑÇ(\"À­¶¡\" ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Ï£À°"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "ÐÙÑÀÀû"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "¿ËÂÞµØÑÇ"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "ÒÔÉ«ÁÐ"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "ÒÔÉ«ÁÐ (Òô±ê)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "ÒÁÀÊ"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "±ùµº"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Òâ´óÀû"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ÈÕÎÄ106¼üÅÌ"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "º«¹ú¼üÅÌ"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "À­ÃÀ¼üÅÌ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Á¢ÌÕÍð AZERTY (ÀÏʽ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Á¢ÌÕÍð AZERTY (ÐÂʽ)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Á¢ÌÕÍð \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Á¢ÌÕÍð \"phonetic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "À­ÍÑάÑÇ"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "ÂíÆä¶Ù"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "ºÉÀ¼"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "²¨À¼ (QWERTY ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "²¨À¼ (QWERTZ ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "ÆÏÌÑÑÀÓï"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "¼ÓÄôó (¿ý±±¿Ë)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "ÂÞÂíÄáÑÇ (QWERTZ ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "ÂÞÂíÄáÑÇ (QWERTY ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "¶íÓï (YAWERTY ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "˹ÂåÎÄÄáÑÇ"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "˹Âå·¥¿Ë (QWERTZ ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "˹Âå·¥¿Ë (QWERTY ²¼¾Ö)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Èü¶ûάÑÇ (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "̹Ã׶û"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Ì©¹ú¼üÅÌ"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Ì©¹úÓï"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ÍÁ¶úÆä (´«Í³ \"F\" ʽ)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ÍÁ¶úÆä (ÏÖ´ú \"Q\" ʽ)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ÎÚ¿ËÀ¼"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "ÃÀʽ¼üÅÌ (¹ú¼Ê)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Ô½ÄϼüÅÌ \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "ÄÏ˹À­·ò (À­¶¡)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "ÒýÈë Windows ×Ö¿â"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ñ­»·×°ÔØ %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "ÏȲðжÂß¼­¾í\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "2.2 µÄÄں˲»Ö§³Ö PCMCIA É豸, ÇëʹÓà 2.4 µÄÄÚºË."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Êó±ê"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "ÂÞ¼¼ MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ÆÕͨ PS2 ¹öÂÖÊó±ê"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "µ¥ ¼ü"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "ÆÕͨ 2 ¼üÊó±ê"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "ÆÕͨ"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "¹öÂÖ"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "´®ÐÐ"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "ÆÕͨ 3 ¼üÊó±ê"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "΢ÈíÖÇÄÜÊó±ê"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "ÂÞ¼¼ MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 ¼ü"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 ¼ü"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ûÓÐ"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "ûÓÐÊó±ê"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Çë²âÊÔÄúµÄÊó±ê."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Òª¼¤»îÊó±ê,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ת¶¯¹öÂÖ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Íê³É"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "ÏÂÒ»²½ ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<-Ç°Ò»²½"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "ÕâÑùÕýÈ·Âð?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Á¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ÀûÓà ADSL Á¬½Ó×î³£Óõķ½·¨ÊÇ dhcp + pppoe.\n"
-"²»¹ý, ȷʵÓÐһЩÁ¬½ÓÊÇÖ»Óà dhcp. \n"
-"Èç¹ûÄúûÓаÑÎÕ¾ÍÑ¡Ôñ 'ʹÓà pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "ʹÓÃdhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "ʹÓà pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "ʹÓà pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ÄúÏëҪʹÓÃÄÄÖÖ DHCP ¿Í»§³ÌÐò?\n"
-"ȱʡµÄÊÇ dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"ûÓÐÔÚÄúµÄϵͳÀï·¢ÏÖÒÔÌ«Íø¿¨. \n"
-"ÎÞ·¨ÉèÖÃÕâ¸öÁ¬½ÓÀàÐÍ."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Ñ¡ÔñÍøÂç½Ó¿Ú"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "ÇëÑ¡ÔñÓÃÄĸöÍø¿¨Á¬½Ó»¥ÁªÍø."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ÕÒ²»µ½ÍøÂ翨"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "ÕýÔÚÅäÖÃÍøÂç"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Èç¹ûÄúÖªµÀ, ¾ÍÇëÊäÈëÄúµÄÖ÷»úÃû×Ö\n"
-"ÓÐЩ DHCP ·þÎñÆ÷ÐèÒªÖ÷»úÃû³Æ²ÅÄܹ¤×÷.\n"
-"ÄúµÄÖ÷»úÃû³Æ±ØÐèÊǸöÍêÈ«ÏÞ¶¨Ö÷»úÃû×Ö£¬\n"
-"ÀýÈç ``mybox.mylab.myco.com''"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ö÷»úÃû×Ö"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "ÍâÖÃISDNµ÷Öƽâµ÷Æ÷"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "ÄÚÖà ISDN ¿¨"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ÄúµÄ ISDN Á¬½ÓÊÇʲôÀàÐÍ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Äãϲ»¶ÄĸöISDNÅäÖÃ?\n"
-"\n"
-"* ÀϵÄÅäÖÃʹÓÃisdn4net, ¹¦ÄÜÇ¿´ó, ÅäÖÃÀ§ÄÑ.\n"
-"\n"
-"* еÄÅäÖüòµ¥Ò׶®£¬±ê×¼£¬¹¤¾ß½ÏÉÙ.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "ÐÂÅäÖÃ(isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ÀÏÅäÖÃ(isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN ÅäÖÃ"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"ÌôÑ¡ÄúµÄÌṩÉÌ. \n"
-"Èç¹ûËü²»ÔÚÁбíÀï, Ñ¡Ôñ  Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Å·ÖÞЭÒé"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Å·ÖÞ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "ÆäËûµØÇøЭÒé"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"ÆäËûµØÇø \n"
-" ûÓÐ D-ÐŵÀ(רÏß)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Äú½«Ê¹ÓÃÄÄÖÖЭÒé?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "ÇëÎÊÄúÊÊÅ俨µÄÖÖÀà?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "ÎÒ²»ÖªµÀ"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Èç¹ûÄúµÄ¿¨ÊÇ ISA ¿¨, ÏÂÒ»ÆÁÄ»ÏÔʾµÄÖµÓ¦¸ÃÊÇÕýÈ·µÄ.\n"
-"\n"
-"Èç¹ûÄúµÄ¿¨ ÊÇ PCMCIA ¿¨, Äú±ØÐëÖªµÀËüµÄ irq ºÍ io.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "ÖÐÖ¹"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "¼ÌÐø"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ÄúµÄ ISDN ¿¨ÊÇÄĸö?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ÎÒ̽²âµ½Ò»¿é ISDN PCI ¿¨, ²»¹ýÎÞ·¨Ê¶±ðËüµÄÐͺÅ. ÇëÔÚÏÂÒ»ÆÁÄ»Àï\n"
-"Ñ¡ÔñÄúµÄ PCI ¿¨"
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ûÓÐ̽²âµ½ ISDN PCI ¿¨. ÇëÔÚÏÂÒ»ÆÁÄ»ÀïÌôÑ¡Ò»ÖÖ."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "ÇëÎÊÄúµÄµ÷Öƽâµ÷Æ÷ÊÇÁ¬½Óµ½ÄǸö´®Ðж˿Ú?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "²¦ºÅ½ÓÈëÑ¡Ïî"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Á¬½ÓÃû³Æ"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "µç»°ºÅÂë"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "µÇ¼ÕʺÅ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "»ùÓڽű¾µÇ¼"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Öն˷½Ê½µÇ¼"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "ÍøÓòÃû³Æ"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Ê×Ñ¡ DNS ·þÎñÆ÷"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "µÚ¶þ¸ö ±¸Ñ¡DNS ·þÎñÆ÷"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Äú¿ÉÒÔÇжϵ½»¥ÁªÍøµÄÁ¬½Ó,»òÖØÐÂÅäÖÃÍøÂçÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Äú¿ÉÒÔÖØÐÂÅäÖû¥ÁªÍøÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "ÄúÏÖÔÚÕýÁ¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Á¬½Óµ½»¥ÁªÍø, »òÖØÐÂÅäÖÃÍøÂçÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "ÄúÏÖÔÚûÓÐÁ¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Á¬½Ó"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "¶Ï¿ª..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "ÕýÔÚÅäÖÃÍøÂç"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "»¥ÁªÍøÁ¬½ÓºÍÅäÖÃ"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "ÏÖÔÚÅäÖÃ%sÍøÂçÁ¬½Ó."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"ÏÖÔÚÅäÖà %s ÍøÂçÁ¬½Ó.\n"
-"\n"
-"\n"
-"°´ Íê³É ¼ÌÐø."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"ÄãÕýÔÚ°²×°ÍøÂç,ÄãµÄÍøÂçÒѾ­ÅäÖúÃ.\n"
-"µã»÷ È·¶¨ ±£´æÅäÖÃ, »ò È¡Ïû ÖØÐÂÅäÖÃÍøÂç.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"»¶Ó­Ê¹ÓÃÍøÂçÅäÖþ«Áé\n"
-"\n"
-"ÅäÖÃinternet/ÍøÂçÁ¬½Ó.\n"
-"Èç¹ûÄã²»Ïë×Ô¶¯¼ì²â, ²»Ñ¡ ¼ìÑéºÐ.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Ñ¡ÔñÒªÅäÖõÄprofile"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "ʹÓÃ×Ô¶¯¼ì²â"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "ÕýÔÚ̽²âÉ豸..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "ÅäÖÃÆÕͨµ÷Öƽâµ÷Æ÷Á¬½Ó"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "¼ì²â´®¿Ú %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ÅäÖà ISDN Á¬½Ó"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "¼ì²â %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSLÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "ÍøÂç½Ó¿Ú¿¨ %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "ÅäÖÃÓÐÏßµçÀÂÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "¼ì²âµ½ÓÐÏßµçÀÂÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "ÅäÖþÖÓòÍøÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "¼ì²âµ½Íø¿¨"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Ñ¡ÔñÄúÏëÒªÅäÖõÄÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"ÄãÅäÖÃÁ˶àÖÖInternet·ÃÎÊ·½Ê½.\n"
-"Ñ¡ÔñÄãҪʹÓõÄÒ»ÖÖ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "¹²Ïí»¥ÁªÍøÁ¬½Ó"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "ÄúÊÇ·ñÏ£ÍûÒ»¿ª»ú¾ÍÆô¶¯Á¬½Ó?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "ÍøÂçÐèÒªÖØÐÂÆô¶¯"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"ÖØÐÂÆô¶¯ÍøÂç´íÎó: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr "×£ºØ,ÍøÂçºÍinternetÅäÖÃÍê³É.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr "½¨ÒéÖØÆô¶¯X"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"¾¯¸æ: Õâ¸öÉ豸ÒѾ­±»ÅäÖÃÓÃÓÚ»¥ÁªÍøÁ¬½Ó..\n"
-"Òª±£ÁôÏÖÓеÄÅäÖÃֻҪѡÔñ È·¶¨.\n"
-"ÐÞ¸ÄÒÔϵÄÏîÄ¿½«¸²¸ÇÔ­ÓеÄÉ趨.."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"ÇëÊäÈëÕą̂µçÄ﵀ IP ÅäÖÃ. \n"
-"ÏÂÁÐÏîÄ¿ÒªÇóÊäÈëÒÔ¾äµã·Ö¸ôÊ®½øÖƸñʽ±íʾµÄ IP µØÖ·.\n"
-" (ÀýÈç 192.168.1.1) "
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "ÕýÔÚÅäÖÃÍøÂçÉ豸 %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(Çý¶¯ %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP µØÖ·"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "×ÓÍøÑÚÂë:"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "×Ô¶¯ÉèÖà IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP µØÖ·µÄ¸ñʽӦ¸ÃÊÇ 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"ÇëÊäÈëÄúµÄÖ÷»úÃû³Æ\n"
-"ÄúµÄÖ÷»úÃû³Æ±ØÐèÊǸöÍêÈ«ÏÞ¶¨µÄÃû³Æ£¬ÀýÈç ``mybox.mylab.myco.com''\n"
-"Èç¹ûÄúÓÐÍø¹ØµÄ»°£¬Ò²ÇëÊäÈëÆä IP µØÖ·"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ·þÎñÆ÷"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Íø¹ØÉ豸"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "´úÀí·þÎñÆ÷ÅäÖÃ"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP ´úÀí·þÎñÆ÷"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP ´úÀí·þÎñÆ÷"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "¼Ç¼Íø¿¨±êÖ¾"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "´úÀí·þÎñÆ÷Ó¦¸ÃÊÇÏó http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "´úÀí·þÎñÆ÷Ó¦¸ÃÊÇÏó ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "»¥ÁªÍøÉ趨"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ÄúÏëÒª²âÊÔÁ¬½Óµ½»¥ÁªÍøÂð?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "ÕýÔÚ²âÊÔÁ¬½Ó..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "ÄúÏÖÔÚÕýÁ¬½Óµ½»¥ÁªÍø"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "ΪÁË°²È«, ¶Ï¿ªÁª½Ó"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"ϵͳûÓÐÁ¬½Óµ½»¥ÁªÍø.\n"
-"ÇëÖØг¢ÊÔÅäÖÃÄúµÄÁ¬½Ó."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Á¬½ÓÅäÖÃ"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "ÇëÌîд»òÑ¡ÔñÏÂÁÐÏîÄ¿"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Íø¿¨µÄ IRQÖжÏ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Card IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Card IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Card IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Äú×Ô¼ºµÄµç»°ºÅÂë"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "·þÎñÉÌÃû³Æ (Èç provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "·þÎñÉ̵绰ºÅÂë"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "·þÎñÉÌ dns 1"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "·þÎñÉÌ dns 2"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Ñ¡Ôñ¹ú¼Ò"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "²¦ºÅģʽ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Á¬½ÓËÙÂÊ"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Á¬½Ó³¬Ê±(Ãë)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "ÕÊ»§Ãû³Æ"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "ÕÊ»§¿ÚÁî"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "×°ÔØʧ°Ü: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Õâ¸öƽ̨Éϲ»Ö§³ÖÀ©Õ¹·ÖÇø"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"·ÖÇø±íÀïÓÐÒ»¶ÎÊÇ¿ÕµÄ, ¿ÉÊÇÎÒû·¨Ê¹ÓÃËü.\n"
-"ΨһµÄ°ì·¨ÊÇÒƶ¯ÄúµÄÖ÷·ÖÇø, °Ñ¿ÕÏв¿·Ö»»µ½ÓëÀ©Õ¹·ÖÇøÏàÁÚµÄλÖÃ."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "´ÓÎļþ %s »Ö¸´Ê§°Ü: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "´íÎóµÄ±¸·ÝÎļþ"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "дÈëÎļþ %s ʧ°Ü"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ÄãµÄÓ²ÅÌÓдí.\n"
-"ÍêÕûÐÔ¼ì²éʧ°Ü."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "±ØÐëÓµÓÐ"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "ÖØÒª"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "·Ç³£ºÃ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "²»´í"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "»òÐíÓÐÓÃ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - ÆÕͨUnix´òӡϵͳ"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - ÐÂÒ»´úLPR"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - ÐÐʽ´òÓ¡¾«Áé"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - ´òÓ¡£¬ ²»ÅŶÓÁÐ"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "±¾»ú´òÓ¡»ú"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Ô¶³Ì´òÓ¡»ú"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Ô¶³Ì CUPS ·þÎñÆ÷µÄ´òÓ¡»ú"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Ô¶¶Ë lpd ·þÎñÆ÷µÄ´òÓ¡»ú"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "ÍøÂç´òÓ¡»ú (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NTÉϵĴòÓ¡»ú"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Novell·þÎñÆ÷´òÓ¡»ú"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "´òÓ¡»úÉ豸URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "×÷Òµpipe¶¨Ïòµ½ÃüÁî"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "δ֪ģʽ"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "±¾»ú´òÓ¡»ú"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Ô¶³Ì´òÓ¡»ú"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " ²¢ÐÐ¿Ú \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB ´òÓ¡»ú \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", ´òÓ¡µ½ %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr " LPD ·þÎñÆ÷ \"%s\", ´òÓ¡»ú \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP Ö÷»ú \"%s\", ¶Ë¿Ú %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "Windows ´òÓ¡·þÎñÆ÷ \"%s\", ¹²ÏíÃû \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "Novell ´òÓ¡·þÎñÆ÷ \"%s\", ´òÓ¡»ú \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", ʹÓÃÃüÁî %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Ö±½Ó´òÓ¡Êä³ö (²»Ê¹ÓÃÇý¶¯³ÌÐò)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(ÔÚ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ÔڸûúÆ÷ÉÏ)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "ÔÚ CUPS ·þÎñÆ÷ \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (ȱʡ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Ñ¡Ôñ´òÓ¡»úÁ¬½Ó"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "´òÓ¡»úÊÇÈçºÎÁ¬½ÓµÄ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Äú²»ÐèÒªÅäÖÃÔ¶³ÌµÄ CUPS ·þÎñÆ÷;ËüÃǻᱻ×Ô¶¯Ì½²âµ½."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "ÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Ô¶³Ì CUPS ·þÎñÆ÷"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"ʹÓÃÔ¶³ÌCUPS·þÎñÆ÷£¬Äã²»±ØÔÚÕâÅäÖôòÓ¡»ú£»CUPS·þÎñÆ÷»á×Ô¶¯Í¨ÖªÆä´òÓ¡»úÐÅÏ¢. "
-"ËùÓÐÄã»úÆ÷ÖªµÀµÄ´òÓ¡»úÁÐÔÚ\"ȱʡ´òÓ¡»ú\"Óò. Ñ¡Ôñȱʡ´òÓ¡»ú²¢°´\"Ó¦ÓÃ/ÖضÁ´òÓ¡"
-"»ú\"°´Å¥. °´Ïàͬ°´Å¥Ë¢ÐÂÁбí. Èç¹ûÄãµÄCUPS·þÎñÆ÷ÔÚÆäËûµÄÍøÂ磬ÄãÐèÒªÅäÖÃCUPS"
-"µÄIPµØÖ·¼°¶Ë¿Ú."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Ò»°ã¶øÑÔ, CUPS»á¸ù¾ÝÍøÂç»·¾³×Ô¶¯ÅäÖÃ. Èç¹û×Ô¶¯ÅäÖò»ÕýÈ·,\n"
-"¹Ø±Õ \"×Ô¶¯CUPSÅäÖÃ\", ÊÖ¹¤ÅäÖà /etc/cups/cupsd.conf, ¶øºó²»ÒªÍü¼ÇÖØÐÂÆô¶¯"
-"CUPS·þÎñ(ÃüÁî: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP µØÖ·µÄ¸ñʽӦ¸ÃÊÇÏó 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "¶Ë¿ÚÐëΪÊý×Ö!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS ·þÎñÆ÷ IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "¶Ë¿Ú"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CUPS×Ô¶¯²½ÖèÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "ÕýÔÚ̽²âÉ豸..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "²âÊԶ˿Ú"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Ôö¼Ó´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "±¾»ú´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "×Ô¶¯Ì½²â´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "×Ô¶¯Ì½²â´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "ʹÓÃ×Ô¶¯¼ì²â"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "ÊÖ¹¤Ñ¡ÔñÓû§"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "¼ì²âµ½ %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "²¢Ðж˿ڴòÓ¡»ú \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB ´òÓ¡»ú \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "ÄúÐèÒªÊäÈë´òÓ¡»úÉ豸Ãû»òÒ»ÎļþÃû!"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "ÎÞ±¾»ú´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-#, fuzzy
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr "ÇëÑ¡ÔñÄú´òÓ¡»úʹÓõĶ˿ڻòÊäÈëÀ¸ÄÚÌîÈëÒ»ºÏ·¨É豸»òÎļþ"
-
-#: ../../printerdrake.pm_.c:408
-#, fuzzy
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr "ÇëÑ¡ÔñÄú´òÓ¡»úʹÓõĶ˿ڻòÊäÈëÀ¸ÄÚÌîÈëÒ»ºÏ·¨É豸»òÎļþ"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr "ÇëÑ¡ÔñÄú´òÓ¡»úʹÓõĶ˿ڻòÊäÈëÀ¸ÄÚÌîÈëÒ»ºÏ·¨É豸»òÎļþ"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "ÇëÎÊÄúµÄ´òÓ¡»úÊÇÁ¬½Óµ½ÄǸö¶Ë¿Ú?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (²¢ÐпÚ: /dev/lp0, /dev/lp1, ..., Ï൱ÓÚ LPT1:, LPT2:, ..., µÚÒ»¸ö USB É豸"
-"¿Ú: /dev/usb/lp0, µÚ¶þ¸ö USB É豸¿Ú: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "ÄúÐèÒªÅäÖÃһ̨´òÓ¡»úÉ豸"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "»¥ÁªÍøÉ趨"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "ÕýÔÚ°²×°³ÌÐò ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "ÕýÔÚ°²×°³ÌÐò ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Êä³ö´òÓ¡»ú¶Ë¿Úµ½ CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "¶ÁÈ¡´òÓ¡»úÊý¾Ý¿â..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Ô¶¶Ë lpd ´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"ҪʹÓÃÒ»¸öÔ¶¶ËµÄ lpd ´òÓ¡¶ÓÁÐ, ÄúÐèÒªÖ¸¶¨´òÓ¡·þÎñÆ÷µÄ\n"
-"Ö÷»úÃûºÍ´òÓ¡ÈÎÎñÒªËÍÍùµÄ´òÓ¡¶ÓÁеÄÃû×Ö."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Ô¶¶ËÖ÷»úÃû"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ô¶³Ì´òÓ¡»úÃû"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "δÕÒµ½Ô¶¶ËÖ÷»ú!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "ûÓÐÕÒµ½Ô¶¶Ë´òÓ¡»ú!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) ´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Èç¹ûÄúҪʹÓõÄÊÇ SMB ´òÓ¡»ú (¾ÍÊÇ Windows 9x/NT ÍøÂç¹²Ïí´òÓ¡»ú),\n"
-"ÄúÐèҪ˵Ã÷Ö÷»úµÄ SMB Ãû×Ö (×¢Òâ! ÊÇÄúÔÚ Windows ÍøÂç\n"
-"ÁÚ¾ÓÀï¿´µ½µÄÖ÷»úÃû, ¿ÉÄÜÓëËüµÄ TCP/IP Ö÷»úÃû²»Í¬,), ¿ÉÄÜ»¹ÐèÒªËüµÄ IP µØÖ·,\n"
-"ÒÔ¼°ÓÐȨ·ÃÎÊ´òÓ¡»úµÄÓû§Ãû, ¹¤×÷×éºÍ¿ÚÁî, µ±È»»¹ÓдòÓ¡»úµÄ¹²ÏíÃû. "
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB ·þÎñÆ÷Ö÷»ú"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB ·þÎñÆ÷ IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "¹²ÏíÃû"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "¹¤×÷×é"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "ÊäÈë·þÎñÆ÷Ãû»ò·þÎñÆ÷µÄIP"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba¹²ÏíÃû ûÓÐÕÒµ½"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare ´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Èç¹ûÄúҪʹÓõÄÊÇ NetWare ´òÓ¡»ú, ÄúÐèҪ˵Ã÷Ö÷»úµÄ NetWare Ãû×Ö (×¢Òâ! \n"
-"¿ÉÄÜÓëËüµÄ TCP/IP Ö÷»úÃû²»Í¬), ÒÔ¼°ÓÐȨ·ÃÎÊ´òÓ¡»úµÄÓû§ÃûºÍ¿ÚÁî, \n"
-"µ±È»»¹ÓдòÓ¡»úµÄ´òÓ¡¶ÓÁÐÃû. "
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "´òÓ¡·þÎñÆ÷"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "´òÓ¡¶ÓÁÐÃû"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP ·þÎñÆ÷δÕÒµ½"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP ¶ÓÁÐÃûδÕÒµ½"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket ´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Òª´òÓ¡µ½Ò»Ì¨ TCP »ò Socket´òÓ¡»ú, ÄúÐèÒªÌṩ\n"
-"´òÓ¡»úµÄÖ÷»úÃûºÍ¿ÉÑ¡µÄ¶Ë¿ÚºÅÂë.\n"
-"HP JetDirectͨ³£Óö˿Ú9100."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "´òÓ¡»úÖ÷»úÃû"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "ûÓдòÓ¡»úÖ÷»úÃû!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "´òÓ¡»úÉ豸 URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Äã¿ÉÒÔÖ±½ÓʹÓà URI ·ÃÎÊ´òÓ¡»ú. URI ±ØÐë·ûºÏCUPS »ò Foomatic ¹æ¶¨.µ«×¢Òâ²»ÊÇËù"
-"ÓеĴòÓ¡¶ÓÁÐ (spooler) ¶¼Ö§³Ö URI."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "±ØÐëÊÇÓÐЧµÄURI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"ÿ̨´òÓ¡»úÐèÒªÒ»¸öÃû×Ö(Èç \"printer\").\n"
-"´òÓ¡»úÃèÊöºÍλÖÃÊÇ¿ÉÑ¡Ïî."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "´òÓ¡»úÃû×Ö"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "ÃèÊö"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "λÖÃ"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "×¼±¸´òÓ¡»úÊý¾Ý..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Ô¶³Ì´òÓ¡»úÃû"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "ÕâÑùÕýÈ·Âð?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "ÊÖ¹¤Ñ¡ÔñÓû§"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "´òÓ¡»úÑ¡Ôñ"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "ÇëÎÊÄú´òÓ¡»úµÄÐͺŠ?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter ´òÓ¡»úÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr "ÄãÕýÔÚÅäÖÃOKI win´òÓ¡»ú, ÒòÆäʹÓÃÌرðµÄͨѶЭÒé, Ö»ÄÜÁ¬ÔÚµÚÒ»¸ö´òÓ¡¿Ú."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "ÀûÃË(Lexmark)ÅçÄ«´òÓ¡»úÉ趨"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr "ÀûÃËÅçÄ«´òÓ¡»ú½ö½öÖ§³Ö±¾µØ´òÓ¡."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"ÅäÖÃÀûÃËÅçÄ«´òÓ¡»úÐèÒª´ÓÀûÃËÍøÕ¾(http://www.lexmark.com/)\n"
-"ÏÂÔØ\"Linux\"Çý¶¯."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"´òÓ¡»úȱʡÉèÖÃ\n"
-"ÈçÖ½ÕÅ´óС¡¢Ä«Ë®ÀàÐ͵ȵÈ."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Ñ¡Ïî %s ±ØÐëÊÇÕûÊý!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Ñ¡Ïî %s ±ØÐëÊÇÊý×Ö!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Ñ¡Ïî %s ³¬³ö·¶Î§!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"ÄãÏ£ÍûÉèÖôòÓ¡»ú(\"%s\")\n"
-"³ÉΪȱʡ´òÓ¡»ú?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"ÇëÑ¡ÔñÒª´òÓ¡µÄ²âÊÔÒ³.\n"
-"×¢Òâ: ÔÚijЩ´òÓ¡»úÉÏ´òÓ¡ÕÕƬ¿ÉÄÜÒª»¨Ï൱³¤µÄʱ¼ä.\n"
-"Ò»°ãÇëÑ¡Ôñ±ê×¼²âÊÔÒ³."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "ûÓвâÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "´òÓ¡"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "±ê×¼²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "¿É»»²âÊÔÒ³(ÐÅÖ½)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Ìæ»»²âÊÔÒ³ (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "ÕÕƬ²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "´òÓ¡²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "ÕýÔÚ´òÓ¡²âÊÔÒ³..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"²âÊÔÒ³ÒѾ­·¢Ë͵½´òÓ¡»úºǫ́³ÌÐò. ¹ýһС¶Îʱ¼ä´òÓ¡»ú½«¿ªÊ¼¹¤×÷.\n"
-"´òӡ״̬:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr "²âÊÔÒ³ÒѾ­·¢Ë͵½´òÓ¡»úºǫ́³ÌÐò. ¹ýÒ»ÉÙ¶Îʱ¼ä´òÓ¡»ú½«¿ªÊ¼¹¤×÷.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "¹¤×÷Õý³£?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Âã´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"ÃüÁîÐдòÓ¡¿ÉʹÓÃÃüÁî\"%s <Îļþ>\" »òͼÐδòÓ¡¹¤¾ß: \"xpp <Îļþ>\" »ò "
-"\"kprinter <Îļþ>\".\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr "¸ÃÃüÁîÄã¿ÉÓÃÔÚÐí¶àÓ¦ÓõĴòÓ¡¶Ô»°¿òµÄ\"´òÓ¡ÃüÁî\"Ïî.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\"ÃüÁîÒ²¿ÉÓÃÀ´Ð޸ĴòÓ¡×÷ÒµµÄÑ¡Ïî, ÀýÈç: \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"µã»÷\"´òÓ¡Ñ¡Ïî\"ÁоٴòÓ¡»úµÄÑ¡Ïî.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-#, fuzzy
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"ÒÔÏÂÊÇ¿ÉÓÃÓÚµ±Ç°´òÓ¡»úµÄһЩ²ÎÊý: \n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr "ÃüÁîÐдòÓ¡ÎļþʹÓÃÃüÁî\"%s <Îļþ>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr "¸ÃÃüÁîÄã¿ÉÓÃÔÚÐí¶àÓ¦ÓõĴòÓ¡¶Ô»°¿òµÄ\"´òÓ¡ÃüÁî\"Ïî.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-#, fuzzy
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"µã»÷\"´òÓ¡Ñ¡Ïî\"ÁоٴòÓ¡»úµÄÑ¡Ïî.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr "ÓÃÃüÁî\"%s <Îļþ>\"»ò\"%s <Îļþ>\"´òÓ¡Îļþ.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Äã¿ÉÒÔÓÃͼÐνӿÚ\"xpdq\"ÉèÖôòÓ¡Ñ¡ÏîºÍ´¦Àí´òÓ¡×÷Òµ.\n"
-"Èç¹ûÄãʹÓÃKDE, ×ÀÃæÉÏÓÐ\"Í£Ö¹´òÓ¡»ú!\"°´Å¥ÓÃÓÚÈ¡Ïû´òÓ¡×÷Òµ.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\"ºÍ\"%s\"ÃüÁîÔÊÐíÐ޸ĴòÓ¡×÷ÒµµÄÑ¡Ïî, ÀýÈç: \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "¹Ø±Õ"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ÕýÔÚ\"%s\"´òÓ¡»úÉÏ´òÓ¡"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ÕýÔÚ\"%s\"´òÓ¡»úÉÏ´òÓ¡"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "¶ÁÈ¡´òÓ¡»úÊý¾Ý..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "´«ËÍ´òÓ¡»úÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Äã¿ÉÒÔ¸´ÖÆ×öºÃµÄ´òÓ¡»úÅäÖÃ´Ó %s µ½µ±Ç°µÄ %s .\n"
-"ËùÓÐÅäÖÃÊý¾Ý½«±»¸²¸Ç£¬´òÓ¡×÷Òµ²»»á´«ËÍ.\n"
-"ÓÉÓÚÒÔÏÂÔ­ÒòijЩ´òÓ¡×÷Òµ²»»á±»´«ËÍ:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr "CUPS²»Ö§³ÖNovell·þÎñÆ÷ÉϵĴòÓ¡»ú¼°·¢ËÍÊý¾Ýµ½ÎÞ¸ñʽÃüÁîµÄ´òÓ¡»ú.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr "PDQÖ»Ö§³Ö±¾µØ´òÓ¡»ú,Ô¶³ÌLPD´òÓ¡»ú, ºÍ Socket/TCP ´òÓ¡»ú.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ºÍ LPRng²»Ö§³ÖIPP´òÓ¡»ú.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"¸Ã³ÌÐòûÓн¨Á¢¶ÓÁлò\n"
-"\"foomatic ÅäÖÃ\"ÎÞ·¨´«ËÍ"
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"´òÓ¡»ú²úÉÌÌṩµÄ PPD »ò´òÓ¡»úµÄ CUPS Çý¶¯³ÌÐòÎÞ·¨´«ËÍ."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Ñ¡ÔñÄãÒª´«Ë͵ĴòÓ¡»ú²¢µã»÷\"´«ËÍ\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "²»´«ËÍ´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "´«ËÍ"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"´òÓ¡»ú\"%s\"ÒѾ­ÔÚ%s´æÔÚ.\n"
-"µã»÷ \"´«ËÍ\" ¸²¸ÇÅäÖÃ.\n"
-"ÄãÒ²¿ÉÒÔÑ¡ÔñеÄÃû³Æ»òÂÔ¹ý¸Ã´òÓ¡»ú."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "´òÓ¡»úÃû³Æ¿ÉÒÔ°üº¬×Öĸ, Êý×Ö ºÍ Ï»®Ïß"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"´òÓ¡»ú \"%s\"ÒѾ­´æÔÚ,\n"
-"ÕæµÄ¸²¸ÇÅäÖÃ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "дòÓ¡»úÃû³Æ"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "´«ËÍ %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"ÄãÒѾ­´«ËÍÒÔǰϵͳÖеÄȱʡ´òÓ¡»ú(\"%s\"),\n"
-"ÊÇ·ñÉèÖÃΪдòӡϵͳµÄȱʡ´òÓ¡»ú %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "ˢдòÓ¡»úÊý¾Ý..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "ÅäÖÃÔ¶³Ì´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "ÕýÔÚÆô¶¯ÍøÂç..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "ÕýÔÚÅäÖÃÍøÂç"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "ÉÐδÍê³ÉÍøÂçÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"ÄãÔÚÅäÖÃÔ¶³Ì´òÓ¡»ú. ÅäÖÃÔ¶³Ì´òÓ¡ÐèÒªÍøÂç·ÃÎÊ,\n"
-"µ«Ä㻹ûÓÐÅäÖÃÍøÂç. ¼ÌÐøÂð?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "ÂÔ¹ýÍøÂçÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"°²×°Ê±µÄÍøÂçÅäÖÃÎÞ·¨Æô¶¯.\n"
-"¿ª»úºó¼ì²éÍøÂç»òÓà Mandrake ÅäÖÃÖÐÐÄÐÞ¸Ä,½Ú \"ÍøÂçºÍÒòÌØÍø\"/\"Á¬½Ó\", È»ºóÓÃ"
-"\"Ó²¼þ\"/\"´òÓ¡»ú\"ÅäÖôòÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"ÍøÂç·ÃÎʳöÏÖ´íÎó.\n"
-"Çë¼ì²éÓ²¼þ»÷ÅäÖÃ. È»ºóÔÙÅäÖÃÔ¶³Ì´òÓ¡."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "ÖØÐÂÆô¶¯´òÓ¡»úϵͳ ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "¸ß"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Ñϸñ"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "ÔÚ %s °²È«¼¶±ðÉÏ°²×°´òӡϵͳ"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"ÄãÕýÔÚ°²×° %s ´òӡϵͳµ½ %s °²È«¼¶±ðµÄϵͳÉÏ.\n"
-"\n"
-"¸Ã´òӡϵͳÔÚºǫ́ÔËÐÐÁôÊسÌÐò, ÁôÊسÌÐòÄÜͨ¹ýÍøÂç\n"
-"½øÐÐÔ¶³Ì·ÃÎÊ,¶ø¿ÉÄÜÔâÊܹ¥»÷. ¸Ã°²È«¼¶±ðÈ´Ê¡\n"
-"Æô¶¯ÉÙÊýÑ¡ÔñµÄÁôÊسÌÐò.\n"
-"\n"
-"ÄãÒªÅäÖôòÓ¡Âð?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "¿ª»úʱÆô¶¯´òӡϵͳ"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"´òӡϵͳ(%s) ¿ª»úʱ²»»á×Ô¶¯Æô¶¯.\n"
-"\n"
-"ÄãÏ£ÍûÈôòӡϵͳ×Ô¶¯Æô¶¯Âð?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "¼ì²éÒѾ­°²×°µÄÈí¼þ..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "ɾ³ý LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "ɾ³ý LPD ..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Ñ¡Ôñ´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ÄúÐèҪʹÓÃÄÄÖÖ´òӡϵͳ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "É趨´òÓ¡»ú\"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "ÕýÔÚ°²×°³ÌÐò ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "´òÓ¡»úÑ¡Ïî"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "×¼±¸´òÓ¡»úÅäÖÃÏòµ¼..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "É趨´òÓ¡»ú\"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "ÄúÏëÒªÅäÖôòÓ¡»úÂð ?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "´òӡϵͳ:"
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "´òÓ¡»úÅäÖÃÏòµ¼"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"ÏÂÁдòÓ¡»úÒÑÅäÖÃ.\n"
-"µã»÷È¥Ð޸Ļò¶ÁÈ¡ÐÅÏ¢,\n"
-"µã»÷\"Ôö¼Ó´òÓ¡»ú\"Ôö¼ÓеĴòÓ¡»ú."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"ÏÂÁдòÓ¡»úÒÑÅäÖÃ.\n"
-"µã»÷È¥Ð޸Ļò¶ÁÈ¡ÐÅÏ¢,\n"
-"µã»÷\"Ôö¼Ó´òÓ¡»ú\"Ôö¼ÓеĴòÓ¡»ú."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "¸üÐÂÁбí (ÏÔʾԶ³Ì CUPS ´òÓ¡·þÎñÆ÷)"
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "ÅäÖôòӡϵͳ"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "ÆÕͨģʽ"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "ÄúÏëÒªÅäÖÃÆäËû´òÓ¡»úÂð ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Ð޸ĴòÓ¡»úÅäÖÃ"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"´òÓ¡»ú %s\n"
-"ÒªÐÞ¸ÄÂð?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Ö´ÐÐ!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "´òÓ¡»úÁ¬½ÓÀàÐÍ"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "´òÓ¡»úÃû³Æ, ÃèÊö, λÖÃ"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "´òÓ¡»ú³§¼Ò, ÐͺÅ, Çý¶¯"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "´òÓ¡»ú³§¼Ò, ÐͺÅ"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "ÉèÖøôòÓ¡»úΪȴʡ"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "´òÓ¡²âÊÔÒ³"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "ÖªµÀÔõÑùÓøôòÓ¡»ú´òÓ¡"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "ɾ³ý´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "ɾ³ý¾É´òÓ¡»úÊý¾Ý\"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "ȱʡ´òÓ¡»ú"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "´òÓ¡»ú \"%s\" ÉèΪȴʡ´òÓ¡»ú."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ÕæµÄɾ³ý´òÓ¡»ú\"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ɾ³ý´òÓ¡»ú\"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "´úÀí·þÎñÆ÷ÅäÖÃ"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"»¶Ó­Ê¹ÓôúÀíÅäÖù¤¾ß.\n"
-"\n"
-"Äã¿ÉÒÔÉèÖÃÐèÒªÓû§ÃûºÍ¿ÚÁîÒÔ¼°\n"
-"²»ÐèÒªÓû§ÃûºÍ¿ÚÁîµÄhttpºÍftp´úÀí\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr "ÇëÊäÈë HTTP ´úÀíÐÅÏ¢"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "¶Ë¿Ú"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "´úÀí·þÎñÆ÷Ó¦¸ÃÊÇÒÔ 'http:'¿ªÍ·"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "¶Ë¿ÚÐëΪÊý×Ö"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr "ÊäÈë FTP ´úÀíÐÅÏ¢"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "´úÀí·þÎñÆ÷Ó¦¸ÃÊÇÒÑ 'ftp:'¿ªÍ·"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr "ÊäÈëʹÓøôúÀí·þÎñÆ÷µÄÓû§ÃûºÍÃÜÂë"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "̞"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "¿ÚÁî"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ÖØÊä¿ÚÁî"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Á½´Î¿ÚÁî²»·û.ÖØÊÔ!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "ÎÞ·¨¼ÓÈëÒ»¸ö·ÖÇøµ½ÒѾ­¸ñʽ»¯µÄÓ²ÅÌÕóÁÐ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "ÎÞ·¨Ð´Èë %s Îļþ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ʧ°Ü"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ʧ°Ü (¿ÉÄÜȱÉÙ raidtools ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "ûÓÐ×ã¹»µÄ·ÖÇø½¨Á¢ %d ¼¶µÄÓ²ÅÌÕóÁÐ\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Æô¶¯ALSAÓïÒôϵͳ"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron Ò»¸öÃüÁÆÚµ÷¶È³ÌÐò."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ¼àÊÓµç³Ø״̬, ²¢Í¨¹ý syslog ×÷¼Ç¼.\n"
-"Ëü»¹ÄÜÓÃÀ´ÔÚµç³Ø²»×ãʱ¹Ø±Õ»úÆ÷."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"ʹÓà at ÃüÁî¿ÉÒÔÔÚÖ¸¶¨Ê±¼äÔËÐÐÄúµÄÃüÁî. \n"
-"»¹¿ÉÒÔÔÚƽ¾ù¸ºÔØ×ã¹»µÍµÄʱºòÔËÐÐÅú´¦ÀíÃüÁî."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ÊÇÒ»¸ö±ê×¼µÄ UNIX ³ÌÐò, Ëü¿ÉÒÔ¶¨ÆÚµÄÖ´ÐÐÓû§Ö¸¶¨µÄ³ÌÐò.\n"
-"vixie cron ÔÚ»ù±¾µÄ UNIX cron ÉÏÔö¼ÓÁËһЩÌØÐÔ, °üÀ¨¸Ä½øµÄ°²È«ÐÔ, \n"
-"ºÍ¸üÇ¿´óµÄÅäÖÃÑ¡Ïî."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM Ϊ»ùÓÚÎı¾µÄ Linux Ó¦ÓóÌÐòÌṩ¶ÔÊó±êµÄÖ§³Ö, Èç MC ÃüÁî½âÊÍÆ÷.\n"
-"ËüͬʱÌṩÁËÀûÓÃÊó±êµÄ¿ØÖÆ̨ '¸´ÖÆ-Õ³Ìù' ²Ù×÷, »¹Ö§³Ö¿ØÖÆ̨ÉϵÄ\n"
-"µ¯³öʽ²Ëµ¥."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"ħÁ¦Ó²ÅÌHardDrake½øÐÐÓ²¼þ¼ì²â£¬ÒÔ¼°Ñ¡ÏîÅäÖÃ\n"
-"ÐÂÔö/ÐÞ¸ÄÓ²¼þ"
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ÊÇÒ»¸ö WWW ÍòάÍø·þÎñÆ÷. ËüÌṩ HTML Îļþ\n"
-"ºÍ CGI µÈ·þÎñ."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"»¥ÁªÍø³¬¼¶ºǫ́·þÎñÆ÷ (³£³Æ×÷ inetd) ÔÚÐèҪʱÆô¶¯ºÜ¶àÆäËûµÄ»¥ÁªÍø·þÎñ.\n"
-"Ëü¸ºÔðÏìÓ¦¶àÖÖ·þÎñ, °üÀ¨ telnet, ftp, rsh, ºÍ rlogin.\n"
-"½ûÖ¹ inetd ¾Íͬʱ½ûÖ¹ÁËËü¸ºÔðµÄËùÓзþÎñ."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Æô¶¯ ºËÐÄ 2.2, ÉèÖ÷À»ðǽ\n"
-"ÒÔ±£»¤ÄãµÄ»úÆ÷²»ÊÜÍøÂç¹¥»÷"
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Õâ¸ö³ÌÐò°´ÕÕ /etc/sysconfig/keyboard µÄÉ趨¼ÓÔØÑ¡ÔñµÄ¼üÅÌÓ³Éä.\n"
-"Äú¿ÉÒÔʹÓà kbdconfig ¹¤¾ßÐÞ¸ÄÕâ¸öÉ趨.¶Ô´ó¶àÊý»úÆ÷, Ó¦¸Ã¿ªÆôÕâ¸ö·þÎñ."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"×Ô¶¯Éú³É /bootϵÄ\n"
-"/usr/include/linux/{autoconf,version}.hÍ·Îļþ"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "¿ª»úʱ×Ô¶¯¼à²âºÍÅäÖÃÓ²¼þ"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "LinuxconfÔÚ¿ª»úʱ»áÖ´ÐÐһЩÈÎÎñÀ´Î¬»¤ÏµÍ³ÅäÖÃ"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ÊDZ£Ö¤ lpr Õý³£¹¤×÷µÄºǫ́´òÓ¡·þÎñ. Õâ¸ö·þÎñÆ÷µÄ»ù±¾¹¦ÄÜÊÇ\n"
-"°Ñ´òÓ¡·þÎñÖ¸Òýµ½ÏàÓ¦µÄ´òÓ¡»ú."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr "LinuxÐéÄâ·þÎñÆ÷£¬ ÓÃÀ´¹¹¼Ü¸ßЧºÍ¸ß¿ÉÓÃϵͳ"
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ÊÇÒ»¸öÓʼþ´«µÝ´úÀí, Õâ¸ö³ÌÐò°ïÖúÄú°Ñµç×ÓÓʼþ´Ó\n"
-"һ̨»úÆ÷Ë͵½Áíһ̨."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr "ΪÁ˲úÉú¸ü¸ßÆ·ÖʵÄËæ»úÊý, ±£´æºÍ»Ö¸´ÏµÍ³µÄ entropy pool"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Ö¸¶¨¿éÉ豸(ÈçÓ²ÅÌ·ÖÇø)µÄRAWԭʼÉ豸\n"
-"¹©OracleÖ®ÀàµÄÓ¦ÓÃÓÃ"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"ºǫ́·þÎñ routed ÔÊÐíͨ¹ý RIP ЭÒé×Ô¶¯¸üÐ嵀 IP ·Óɱí.\n"
-"ÔÚСÐÍÍøÂçÉϹ㷺µÄ²ÉÓà RIP, È»¶øÔÚ¸ü¸´ÔÓµÄÍøÂçÉÏÐèÒª¸ü¸´ÔӵķÓÉЭÒé."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr "rstat ЭÒéÔÊÐíÍøÂçÉϵÄÓû§»ñÈ¡ÍøÂçÉÏÈκλúÆ÷µÄÐÔÄÜÖ¸±ê."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr "rusers ЭÒéÔÊÐíÍøÂçÉϵÄÓû§Ê¶±ðÔÚÆäËû×÷³öÓ¦´ðµÄ»úÆ÷ÉÏÓÐÄÄЩÓû§µÇ¼."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ЭÒéʹԶ¶ËµÄÓû§¿ÉÒԵõ½ÔËÐÐÁË rwho ºǫ́·þÎñµÄ\n"
-"»úÆ÷ÉÏËùÓеǼÓû§µÄÇåµ¥ (ÀàËÆ finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Æô¶¯ÓïÒôϵͳ"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog ÊÇÕâÑùÒ»¸öÉèÊ©, ºÜ¶àÆäËûµÄºǫ́·þÎñÀûÓÃËüÔÚ\n"
-"¸÷ÖÖϵͳÈÕÖ¾ÎļþÖмǼÈÕÖ¾ÏûÏ¢. Ò»Ö±ÔËÐÐ syslog ÊǸöºÃÖ÷Òâ."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "ÔØÈëUSBÉ豸µÄÇý¶¯"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Æ𶯠X ×ÖÌå·þÎñ(X´°¿Úϵͳ±ØÐë)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Ñ¡Ôñ¿ª»úʱ×Ô¶¯Æô¶¯µÄ·þÎñ"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "ÕýÔÚ´òÓ¡"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "»¥ÁªÍø"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Îļþ¹²Ïí"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "ϵͳ"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Ô¶¶Ë¹ÜÀí"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Êý¾Ý¿â·þÎñÆ÷"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "·þÎñ: %d µÇ¼ÇµÄ %d ¼¤»î"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "·þÎñ"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ÔËÐÐ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "Í£Ö¹"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "·þÎñ¼°ÁôÊسÌÐò"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "ûÓи÷þÎñµÄ¸½¼ÓÐÅÏ¢."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Æô¶¯Ê±"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Æô¶¯"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Í£Ö¹"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "ÆäËûµØÇøЭÒé"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "»¥ÁªÍø·ÃÎÊ"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "¶àýÌå - ͼÐÎ"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "¿ª·¢Æ½Ì¨"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "¿ØÖÆÖÐÐÄ"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "ÍøÂç½Ó¿Ú¿¨"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB ·þÎñÆ÷Ö÷»ú"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "ÓÎÏ·"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "ר¼Ò"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "ÕýÔÚ°²×°³ÌÐò ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"ÎÒ¶Á²»³ö·ÖÇø±í, Õâ¸ö·ÖÇø±íÆÆ»µµÃÌ«ÑÏÖØÁË :(\n"
-"ÎÒÏÖÔÚ³¢ÊÔÇå³ý»µ·ÖÇø."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "´íÎó!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "ÎÞ·¨ÕÒµ½Ó³ÏóÎļþ '%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "×Ô¶¯°²×°ÅäÖÃ"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"ÏÖÔÚÅäÖÃ×Ô¶¯°²×°ÈíÅÌ. СÐĵã.\n"
-"\n"
-"Äã¿ÉÒÔÖظ´¸Ã»úÆ÷µÄ°²×°, ½»»¥Ìáʾ²½Öè, ÐÞ¸ÄÊýÖµ.\n"
-"\n"
-"Ϊ°²È«Æð¼û, ·ÖÇø¼°¸ñʽ»¯²»»á×Ô¶¯Ö´ÐÐ.\n"
-"\n"
-"¼ÌÐøÂð?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "×Ô¶¯²½ÖèÅäÖÃ"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr "Ñ¡ÔñÒªÖظ´µÄÿһ²½°²×°, ·ñÔòÊÖ¹¤"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "¹§Ï²!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"ÈíÅ̳ɹ¦Éú³É.\n"
-"Äã¿ÉÒÔÖظ´°²×°."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "×Ô¶¯°²×°"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Ôö¼ÓÌõÄ¿"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "ɾ³ý×îºóÒ»ÏîÂð?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      ±¸·ÝÏòµ¼±¨¸æ \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup ÊØ»¤½ø³Ì±¨¸æ\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Ïêϸ±¨¸æ\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "½ø¶È"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "±¸·ÝϵͳÎļþ..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "±¸·ÝÓ²ÅÌÎļþ..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "±¸·ÝÓû§Îļþ..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Ó²ÅÌÎļþ±¸·Ý½ø¶È..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "±¸·ÝÆäËüÎļþ..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP Áª½Ó´íÎó: ÎÞ·¨´«ËÍÎļþ.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Ñ¡ÔñÎļþ"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Ñ¡ÔñÎļþ»òĿ¼, È»ºóµã»÷ 'Ôö¼Ó'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "ÇëÑ¡ÔñÄúÏ£Íû±¸·ÝµÄÓû§"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "ÔöÁ¿±¸·Ý"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "ÒƳýÑ¡Ôñ"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Óû§"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "ʹÓà FTP ±¸·Ý"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "ÇëÊäÈëÖ÷»úÃû»ò IP µØÖ·."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "ÇëÊäÈëÄúµÄµÇ¼Ãû"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "ÇëÊäÈëÄúµÄ¿ÚÁî"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "¼Çס¿ÚÁî"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP Á¬½Ó"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "¼ÓÃÜÁ¬½Ó"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "ʹÓà CD/DVDROM ±¸·Ý"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "ÇëÑ¡ÔñÄúʹÓÃµÄ CD ¿Õ¼ä´óС."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "ÇëÑ¡ÖÐÕâÀï, Èç¹ûÄúʹÓà CDRW É豸"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"ÇëÑ¡ÖÐÕâÀï, Èç¹ûÄúÏ£ÍûÖÆ×÷Æô¶¯¹âÅÌ\n"
-"¸Ã¹âÅÌ¿É×ÔÆô¶¯."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "ʹÓôŴø±¸·Ý"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "ÇëÊäÈëĿ¼Ãû:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "±¸·ÝÎļþ´ÅÅÌÏÞ¶î"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "ÍøÂç"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "ÿСʱ"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "ÿÈÕ"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "ÿÖÜ"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "ÿÔÂ"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "ʹÓÃÊØ»¤½ø³Ì"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "ÇëÑ¡ÔñÄúÏ£Íû±¸·Ýʱ¼ä¼ä¸ô"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "ÇëÑ¡Ôñ±¸·Ý½éÖÊ."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "ʹÓÃÓ²ÅÌ"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "ʹÓà FTP"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "λÖÃ"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "ʱ¼ä"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "²ÎÊý"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "DrakBackup ÅäÖÃ"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "ÇëÑ¡ÔñÄúÏ£Íû±¸·ÝÎļþµ½ÄÄÀï"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "ÇëÑ¡ÔñÄúÒª±¸·ÝµÄÎļþ"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "±¸·Ýϵͳ"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "±¸·ÝÓû§"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "ÊÖ¹¤Ñ¡ÔñÓû§"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Ñ¡Ïî:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "ÇëÈ¡ÏûÑ¡Ôñ²¢É¾³ýËü."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "±¸·ÝÎļþËð»µÁË"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "        »Ö¸´¸ü¸Ä       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "±¸·ÝϵͳÎļþ֮ǰ:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "ÇëÑ¡ÔñÐèÒª»Ö¸´µÄÊý¾Ý"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "ʹÓÃÓ²Å̱¸·ÝÎļþ"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "´ÓÓ²Åָ̻´"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "ÇëÑ¡ÔñÁíÒ»ÔØÌå"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "ÔØÌå"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "»Ö¸´ÏµÍ³"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "»Ö¸´Óû§Îļþ"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "»Ö¸´ÆäËüÎļþ"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "¶¨ÖÆ"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Ç°Ò»²½"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "±£´æ"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "ÕýÔÚ±¸·Ý"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "»Ö¸´"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "ÏÂÒ»²½"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Ñ¡ÔñÈí¼þ°ü"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "ÇëÑ¡ÔñÒª»Ö¸´µÄÊý¾Ý..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "ÇëÑ¡ÔñʹÓõÄÔØÌå..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "ÇëÑ¡ÔñÐ豸·ÝµÄÊý¾Ý..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "´íÎóµÄ±¸·ÝÎļþ"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "´íÎóµÄ±¸·ÝÎļþ"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "´íÎóµÄ±¸·ÝÎļþ"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "ÕýÔÚ̽²âÉ豸..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Çë²âÊÔÄúµÄÊó±ê."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "ÇëÑ¡ÔñÄúÒª°²×°µÄÈí¼þ°ü"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "ÅäÖÃ"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN ÅäÖÃ"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "É趨Îļþϵͳ"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "°²×° %s ʧ°Ü£¬³öÏÖÏÂÁдíÎó:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "²éÕÒÒÑ°²×°µÄ×ÖÌå"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "²»Ñ¡ÒÑ°²×°µÄÎļþ"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "·ÖÎöËùÓÐ×ÖÌå"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "ÕÒ²»µ½×Ö¿âÎļþ"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "Íê³É"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ÔÚ·ÖÇøÖÐÕÒ²»µ½ÈκÎ×Ö¿â"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ÕÒ²»µ½ÈκÎ×Ö¿â\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "ÔÚ°²×°¼Ç¼ÖвéÕÒ×Ö¿â"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "¿½±´×Ö¿â"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "°²×° TTF ×Ö¿â"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "ÕýÔÚÔËÐÐ ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "TTF ×Ö¿â°²×°Íê³É"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "ת»»×Ö¿â"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "ÕýÔÚ¹¹Ôì type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript ÒýÓÃ"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf ×Ö¿âת»»"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm ×Ö¿âת»»"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "ɾ³ýÁÙʱÎļþ"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "ÖØÐÂÆô¶¯ XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "ɾ³ý×Ö¿âÎļþ"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs restart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "ÒýÈë×Ö¿â"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "ÒýÈë Windows ×Ö¿â"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "жÔØ×Ö¿â"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "¸ß¼¶Ñ¡Ïî"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "ËùÓÐ×Ö¿â"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "ÇëÑ¡ÔñʹÓÃÐÂ×ÖÌåµÄÓ¦ÓóÌÐò :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "»ù±¾´òÓ¡"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "°²×°Áбí"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "È·ÈÏ"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "·ÅÆú"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "È¡ÏûÑ¡Ôñ"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Ñ¡ÔñËùÓÐ"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "ɾ³ýÁбí"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "³õʼ²âÊÔ"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "¿½±´×Ö¿â"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "°²×°²¢×ª»»×Ö¿â"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "°²×°ºóµÄÉ趨"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "ɾ³ý×Ö¿â"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "ɾ³ýºóµÄÉ趨"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "¹²Ïí»¥ÁªÍøÁ¬½Ó"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÏÖÔÚÒѾ­¼¤»î"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"»¥ÁªÍøÁ¬½Ó¹²ÏíµÄÉ趨ÒѾ­Íê³É.\n"
-"Ëüµ±Ç°ÒѾ­±»Æô¶¯.\n"
-"\n"
-"ÄúÒª×öʲô?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "½ûÖ¹"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "À뿪"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ÖØÐÂÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Í£Ö¹·þÎñ..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÏÖÔÚ±»½ûÖ¹ÁË"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÏÖÔÚ±»½ûÖ¹"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"»¥ÁªÍøÁ¬½Ó¹²ÏíµÄÉ趨ÒѾ­Íê³É.\n"
-"Ëüµ±Ç°ÒѾ­±»½ûÖ¹.\n"
-"\n"
-"ÄúÒª×öʲô?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "Æô¶¯"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Æô¶¯·þÎñ..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÏÖÔÚÒѾ­¼¤»î"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Äú»¹¿ÉÒÔÅäÖÃÄúµÄµçÄÔ, ÈÃÆäËüµçÄÔ¹²ÏíËüµÄ»¥ÁªÍøÁ¬½Ó.\n"
-"\n"
-"×¢Òâ: ÄúÐèÒªÓоÖÓòÍø(LAN)ʹÓõÄÍø¿¨."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Íø¿¨ %s (ʹÓà %s Ä£¿é)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Íø¿¨ %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "ÄúϵͳÖÐûÓÐÍøÂ翨!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr "ÄúµÄϵͳÀïûÓÐÅäÖÃÒÔÌ«Íø¿¨. ÇëÔËÐÐÓ²¼þÅäÖù¤¾ß."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "ÍøÂç½Ó¿Ú¿¨"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ÄúµÄϵͳÖÐÖ»ÅäÖÃÁËÒ»¸öÍø¿¨:\n"
-"\n"
-"%s\n"
-"\n"
-"¶ÔÕâ¿éÍø¿¨ÅäÖÃÄúµÄ¾ÖÓòÍø."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "ÇëÑ¡ÔñÄĸöÍø¿¨½«Á¬½ÓÄúµÄ¾ÖÓòÍø."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "ÒÑÍê³ÉÍøÂçÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "×Ô¶¯ÖØÐÂÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Ð޸ĵ±Ç°ÍøÂç½çÃæµÄÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"µ±Ç°µÄ `%s' ÅäÖÃΪ:\n"
-"\n"
-"ÍøÂç: %s\n"
-"IP µØÖ·: %s\n"
-"IP ÊôÐÔ: %s\n"
-"ÆäËü: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C ¼¶¾ÖÓòÍø"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "DHCP ·þÎñÆ÷ IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "ÖØÐÂÅäÖÃÍøÂç½çÃæºÍ DHCP "
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "ÔÚµ±Ç°µÄ %s ÅäÖÃÖз¢ÏÖ¿ÉÄÜµÄ LAN µØÖ·³åÍ»! \n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "·¢ÏÖ·À»ðǽÅäÖÃ!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"¾¯¸æ! ·¢ÏÖÔ­À´µÄÅäÖÃÀûÓÃÁË·À»ðǽ¹¦ÄÜ.\n"
-"ÄúÐèÒªÔÚ°²×°Ö®ºóÊÖ¹¤ÐÞ¸Ä."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "ÕýÔÚÅäÖÃ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "ÕýÔÚÅäÖýű¾, °²×°Èí¼þ, Æô¶¯·þÎñ³ÌÐò ..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "°²×° %s Èí¼þ°ü³öÏÖÎÊÌâ"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"ËùÓÐÅäÖö¼Íê³ÉÁË.\n"
-"ÄúÏÖÔÚ¿ÉÒÔÀûÓÃ×Ô¶¯ÍøÂçÉèÖà (DHCP).ÈÃÄúµÄ¾ÖÓòÍøÉÏÆäËüµÄµçÄÔ¹²ÏíÄúµÄ»¥ÁªÍøÁ¬½Ó"
-"ÁË."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "ÅäÖÃÒѾ­Íê³É.Ëüµ±Ç°ÒѾ­±»½ûÖ¹."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "ÅäÖÃÒѾ­Íê³É.Ëüµ±Ç°ÒѾ­±»Æô¶¯."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíûÓÐÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "»¥ÁªÍøÁ¬½Ó¹²ÏíÅäÖÃ"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"»¶Ó­Ê¹Óû¥ÁªÍøÁ¬½Ó¹²ÏíÅäÖÃ!\n"
-"\n"
-"%s\n"
-"\n"
-"µã»÷''ÅäÖÃ''ÔËÐÐÅäÖþ«Áé."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ÍøÂçÅäÖÃ(%d Íø¿¨)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profile: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "ɾ³ýprofile..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Ҫɾ³ýµÄprofile:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "н¨profile..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "н¨profileÃû:"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ö÷»úÃû×Ö:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "»¥ÁªÍø·ÃÎÊ"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "ÀàÐÍ: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Íø¹Ø:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Íø¿¨:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "״̬:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "É趨ÒòÌØÍø·ÃÎÊ·þÎñ"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "¾ÖÓòÍøÅäÖÃ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Çý¶¯³ÌÐò"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "½Ó¿Ú"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "ЭÒé"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "״̬"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "ÅäÖþÖÓòÍøÂç..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "µã»÷¸Ã´¦Æô¶¯¾«Áé ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Ïòµ¼..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Ó¦ÓÃ"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "ÇëµÈ´ý...É趨ÅäÖÃ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Á¬½Ó"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "δÁ¬½Ó"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Á¬½Ó..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "¶Ï¿ª..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"ÄãûÓÐÅäÖúõĽӿÚ.\n"
-"µã»÷ 'ÅäÖÃ' ÏÈÅäÖýӿÚ"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN ÅäÖÃ"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "ÊÊÅäÆ÷ %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Æô¶¯Ð­Òé"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "¿ª»úʱÆô¶¯"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP¿Í»§¶Ë"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "ÏÖÔÚ¼¤»î"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "ÏÖÔÚ½ûÓÃ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"ÄãûÓÐÒòÌØÍøÁª½Ó.\n"
-"µã»÷ 'ÅäÖÃ' ÏȽ¨Á¢Áª½Ó"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "»¥ÁªÍøÁ¬½ÓÅäÖÃ"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "»¥ÁªÍøÁ¬½ÓÅäÖÃ"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Á¬½ÓÀàÐÍ:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "²ÎÊý"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Íø¹Ø"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Íø¿¨"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP¿Í»§¶Ë"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "É趨°²È«¼¶±ð"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "¿ØÖÆÖÐÐÄ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Ñ¡ÔñÄúÏëÒªµÄ¹¤¾ß"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "¼ÓÄôó (¿ý±±¿Ë)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "±ùµº"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "°ÂµØÀû"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Newzealand"
-msgstr "ºÉÀ¼"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "Ó÷¨: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "ÇëÑ¡ÔñÄúʹÓõļüÅ̲¼¾Ö."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "ÔÚ¿ØÖÆ̨ÓÃBackSpace×÷ɾ³ý¼ü"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "»»¹âÅÌ"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"ÇëÔÚÇý¶¯Æ÷ÖвåÈë°²×°¹âÅÌ, È»ºóµã»÷ 'È·¶¨'.\n"
-"Èç¹ûÄúûÓÐÕâÕŹâÅÌ, Çëµã»÷ 'È¡Ïû', ·ÅÆúlive upgrade."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "ÎÞ·¨¿ªÊ¼ live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "½öÏÔʾ±»Ñ¡ÔñµÄÈÕÆÚ"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Îļþ(F)/н¨(_N)"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Îļþ(F)/´ò¿ª(_O)"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Îļþ(F)/±£´æ(_S)"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Îļþ(F)/Áí´æΪ(_A)"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Îļþ(F)/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/Ñ¡Ïî(_O)"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Ñ¡Ïî(O)/²âÊÔ"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/°ïÖú(_H)"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/°ïÖú(H)/¹ØÓÚ(_A)..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Óû§"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "ÐÅÏ¢"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "ËÑË÷"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "ÈÕÖ¾²ì¿´¹¤¾ß"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "ÉèÖÃ"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "Æ¥Åä"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "²»Æ¥Åä"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Ñ¡ÔñÎļþ"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "ÈÕÀú"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "ÎļþÄÚÈÝ"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ÇëµÈ´ý, ·ÖÎöÎļþ: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "»¥ÁªÍøÉ趨"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"»¶Ó­Ê¹Óà Mail/SMS ÅäÖù¤¾ß.\n"
-"\n"
-"ÔÚÕâÀïÄú¿ÉÒÔÄãÅäÖÃÒÔÏ·þÎñ \n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "·þÎñÅäÖÃ"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "µ÷ÈëÅäÖÃ"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "»¥ÁªÍøÉ趨"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Áí´æΪ..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "ÇëÑ¡ÔñÄúµÄÊó±êÊÇÄÇÒ»ÖÖÀàÐÍ."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ÕÒ²»µ½ serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Ä£ÄâÈý¼ü"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Ñ¡ÔñɨÃèÒÇ"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "ɨÃèÒÇ %s ÔÝʱ²»Ö§³Ö"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "¿ª»úÒýµ¼É豸"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "ÅäÖ÷À»ðǽ"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "ÅäÖ÷À»ðǽ"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"·À»ðǽ\n"
-"\n"
-"ÄãÒѾ­ÅäÖÃÁË·À»ðǽ.\n"
-"µã»÷ ÅäÖà Ð޸Ļòɾ³ý·À»ðǽ"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"·À»ðǽ\n"
-"\n"
-"µã»÷ ÅäÖà ÉèÖÃÒ»±ê×¼·À»ðǽ"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Ñ¡ÔñÓïÑÔ"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Ñ¡Ôñ°²×°Àà±ð"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "̽²âÓ²ÅÌ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "É趨Êó±ê"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Ñ¡Ôñ¼üÅÌÀàÐÍ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "°²È«"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "É趨Îļþϵͳ"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "¸ñʽ»¯Ó²ÅÌ·ÖÇø"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Ñ¡ÔñÈí¼þ°ü"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "°²×°ÏµÍ³"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ôö¼ÓÓû§"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "ÍøÂçÅäÖÃ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "É趨ºǫ́·þÎñ"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "°²×°Òýµ¼³ÌÐò"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "ÖÆ×÷¿ª»úÈíÅÌ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "ÅäÖÃ X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "°²×°ÏµÍ³¸üаü"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Í˳ö°²×°"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"С·À»ðǽÅäÖÃ\n"
-"\n"
-"ÅäÖÃMandrake¸öÈË·À»ðǽ, ÅäÖÃÇ¿´óרÓ÷À»ðǽ, ²Î¼û MandrakeSecurity ·À»ðǽ."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"ÄãµÃÑ¡Ôñ¿ª·ÅµÄ·þÎñ, ·À»ðǽ½«¹Ø±Õ²»Ê¹ÓõķþÎñ. ÄãÖ»ÓÐÖØÐÂÔËÐиóÌÐò²ÅÄܸıäÅä"
-"ÖÃ!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"¿ª·ÅWeb·þÎñ?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"ÔËÐÐÓòÃû·þÎñ?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr "¿ª·Åssh½ÓÈë?"
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr "¿ª·Åtelnet·þÎñ?\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr "¿ª·Åftp·þÎñ?\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"ÔËÐÐemail·þÎñÆ÷? Èç¹ûÄãÓà pine, mutt»òÆäËûÃüÁîÐÐemail¿Í»§¶Ë,\n"
-"·¢ËÍemail. Èç¹û²»ÔËÐÐemail·þÎñÆ÷, ·À»ðǽ¹Øµô email ·þÎñ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"ÄúÔËÐÐPOPºÍIMAP·þÎñ? \n"
-"¸Ã»úÆ÷ÓÃÓÚÍйܷÇWEB»¯µÄemail.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr "ÄúºÃÏñÔËÐÐ 2.2ºËÐÄ. ÄúµÄÍøÂ綯̬·ÖÅä IP£¬¶Ô²»¶Ô?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"ÄúµÄ¼ÆËã»úÊÇ·ñÓëÆäËü»úÆ÷ͬ²½Ê±¼ä?\n"
-"ͨ³££¬´óÖÐÐÍ Unix/Linux×é֯ͬ²½¼ÆËã»úµÄʱ¼äÓÃÓÚÈÕÖ¾µÈ.\n"
-"Èç¹ûÄú²»Çå³þ£¬ÄÇÄú¾Í²»ÐèÒª."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"ÅäÖÃÍê³É. ÐÞ¸ÄдÈëÓ²ÅÌ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "ÎÞ·¨´ò¿ª %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "ÔÚ´ò¿ª %s дÈëʱ·¢Éú´íÎó: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "ÅäÖ÷À»ðǽ"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "ÕýÔÚ×¼±¸°²×°"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "WebÍøÕ¾/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "ÍøÂç¼ÆËã»ú (¿Í»§¶Ë)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS Îļþ·þÎñÆ÷, SMB Îļþ·þÎñÆ÷, SSH Îļþ·þÎñÆ÷, ´úÀí·þÎñÆ÷"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "°ì¹«"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "ÅäºÏ Palm Pilot, Visor µÈÊÖ³ÖÉ豸µÄ¹¤¾ß "
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "·À»ðǽ/·ÓÉÆ÷"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "ÓòÃûºÍÍøÂçÐÅÏ¢·þÎñ DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"°ì¹«³ÌÐò: ×Ö´¦Àí (kword, abiword), µç×Ó±í¸ñ(kspread,gnumeric) pdf ÔĶÁÆ÷, µÈ"
-"µÈ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "ÓйØÒôƵµÄ¹¤¾ß: mp3 ºÍ midi ²¥·ÅÆ÷, »ìÒôÆ÷µÈ "
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "ÓÐ¹Ø Linux ºÍ×ÔÓÉÈí¼þµÄÊé¼®ºÍÖ¸ÄÏ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, µÈ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¶àýÌå - ÊÓƵ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Ò»×éÓÃÓÚ Óʼþ, ÐÂÎÅ, Îļþ´«Êä, ÁÄÌìµÄ¹¤¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Êý¾Ý¿â"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL»ò MySQLÊý¾Ý¿â·þÎñ"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "¼ò»¯ÅäÖõŤ¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¶àýÌå - ÉùÒô"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Ó¦Óù¤¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Îĵµ"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "¿ØÖÆ̨¹¤¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "PostfixÓʼþ·þÎñ£¬ Inn ÐÂÎÅ×é·þÎñ"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "»¥ÁªÍø¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¶àýÌ幤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "ÅäÖÃ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "¸ü¶àµÄͼÐÎ×ÀÃæ (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE ×ÀÃæ»·¾³, »ù±¾µÄͼÐλ·¾³ºÍÒ»×éÅäÌ׵Ť¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "ͼÐλ·¾³"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "ApacheºÍ Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "ÓÃÓÚ´´½¨ºÍÉÕ¼¹âÅ̵Ť¾ß"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "°ì¹«¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "·þÎñÆ÷"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, µÈ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "ͼÏñ´¦Àí ³ÌÐò Èç Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "CºÍC++¿ª·¢¿â£¬³ÌÐò¼°Í·Îļþ"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "ÍøÂçÎļþ·þÎñÆ÷"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Óʼþ/×é¼þ/ÐÂÎÅ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "ÓÎÏ·¹¤×÷Õ¾"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ÊÓƵ²¥·ÅºÍ±à¼­"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¶àýÌå - ͼÐÎ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ÓÎÏ·³ÌÐò: ½Ö»ú, ÆåÅÌ, Õ½ÂÔ µÈµÈ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "ÉÏÍø¹¤¾ß, ÈçÊÕ·¢µç×ÓÓʼþ¼°ÐÂÎÅ×é (pine, mutt, tin..) , ä¯ÀÀÍøÕ¾."
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "´æµµ£¬·ÂÕ棬¼à¿Ø"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "¸öÈ˲ÆÎñ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Å䱸ÁËÓû§ÓÑÉƵÄÓ¦ÓÃÓë×ÀÃ湤¾ßµÄͼÐÎ×ÀÃæ»·¾³"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "sshµÈЭÒé¿Í»§¶Ë"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "»¥ÁªÍø·ÃÎÊÍø¹Ø"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ÉùÒôºÍÊÓƵ²¥·Å/±à¼­³ÌÐò"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "ÆäËüͼÐÎ×ÀÃæ"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "±à¼­Æ÷, shell, Îļþ¹¤¾ß, ÖÕ¶Ë"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ÓÃÓÚ¹ÜÀíÄúµÄ²ÆÎñ, Èç gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "¸öÈËÐÅÏ¢¹ÜÀí"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¶àýÌå - ÉÕ¼¹âÅÌ"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "¿Æѧ¼ÆË㹤×÷Õ¾"
-
-#~ msgid "About"
-#~ msgstr "ÖÐÖ¹"
-
-#~ msgid "             Help           "
-#~ msgstr "           °ïÖú            "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr "ÎÞ·¨·ÃÎÊÏàÓ¦ºËÐĵĺËÐÄÄ£¿é(ÕÒ²»µ½ %sÎļþ)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "ûÓÐ"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Ñ¡ÔñȱʡµÄÓû§!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Ó¦ÓÃ/ÖضÁ´òÓ¡»ú"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "ÇëÖ¸¶¨Ä£¿é %s µÄ²ÎÊý"
-
-#~ msgid "mount failed"
-#~ msgstr "×°ÔØʧ°Ü"
-
-#~ msgid "Low"
-#~ msgstr "µÍ"
-
-#~ msgid "Medium"
-#~ msgstr "ÖÐ"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Õâ¸ö°²È«¼¶±ðÓÚÉÏÒ»¸ö»ù±¾Ïàͬ, \n"
-#~ "µ«Ôö¼ÓÁ˸ü¶àµÄÓйذ²È«ÐԵľ¯¸æºÍ¼ìÑé."
-
-#, fuzzy
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "µã»÷\"´òÓ¡Ñ¡Ïî\"ÁоٴòÓ¡»úµÄÑ¡Ïî.\n"
-#~ "\n"
-
-#~ msgid "Boot mode"
-#~ msgstr "¿ª»úÒýµ¼Ä£Ê½"
-
-#~ msgid "Export"
-#~ msgstr "Êä³ö"
-
-#~ msgid "click here"
-#~ msgstr "µã»÷ÕâÀï"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr "ɨÃèÒÇ %s ʹÓò¢Ðж˿Ú, ÔÝʱ²»Ö§³Ö"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux ÄÚ²¿Ê¹Óà GMT (¸ñÁÖÄáÖαê׼ʱ¼ä), È»ºó¸ù¾ÝÄúÑ¡ÔñµÄʱÇøת»»³Éµ±µØ"
-#~ "ʱ¼ä."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Á¬½Óµ½»¥ÁªÍø"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "¶Ï¿ªµ½»¥ÁªÍøµÄÁ¬½Ó"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "ÍøÂçÁ¬½ÓÅäÖÃ(LAN »ò»¥ÁªÍø)"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "̽²âµ½ %s, ÄúÏ£ÍûÅäÖÃËüÂð ?"
-
-#~ msgid "Here is a list of all auto-detected printers. "
-#~ msgstr "ÕâÀïÊDZ»×Ô¶¯Ì½²âµ½µÄ´òÓ¡»úµÄÁбí. "
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "ÇëÑ¡ÔñÄúÒª°²×°µÄ´òÓ¡»ú."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "ÐÅÏ¢"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome¹¤×÷Õ¾"
-
-#~ msgid "authentification"
-#~ msgstr "¼ø±ð"
-
-#~ msgid "user"
-#~ msgstr "Óû§"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "ÇëÑ¡ÔñÄúµÄÊó±êÊÇÄÇÒ»ÖÖÀàÐÍ."
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "ɨÃèÓÐЧµÄNFS¹²Ïí×ÊÔ´"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "ɨÃè·þÎñÆ÷ %s µÄÓÐЧµÄNFS¹²Ïí×ÊÔ´"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "ɨÃèÓÐЧµÄsamba¹²Ïí×ÊÔ´"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "ɨÃè·þÎñÆ÷ %s µÄÓÐЧµÄsamba¹²Ïí×ÊÔ´"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Í˳ö"
-
-#~ msgid "Removable media"
-#~ msgstr "¿ÉÒƶ¯½éÖÊ"
-
-#~ msgid "Active"
-#~ msgstr "¿ÉÆô¶¯"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "·ñ"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "ÕÒµ½Ò»Ì¨´òÓ¡»ú, ÐͺÅÊÇ \"%s\". "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "±¾»ú´òÓ¡É豸"
-
-#~ msgid "Printer Device"
-#~ msgstr "´òÓ¡»úÉ豸"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "É豸/ÎļþÃû ûÓÐÕÒµ½"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Ô¶³Ì CUPS ·þÎñÆ÷µÄ´òÓ¡»ú"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Ô¶³Ì CUPS ·þÎñÆ÷µÄ´òÓ¡»ú"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "ϵͳ"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "ÆäËû"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "ÇëÑ¡ÔñÄúʹÓõļüÅ̲¼¾Ö."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "ÇëÑ¡ÖÐÒ»¸ö½éÖÊ"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "ÀàÐÍ: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "´íÎóµÄ±¸·ÝÎļþ"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "ÅäÖÃ X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "´òÓ¡»úÉ豸"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "È¡Ïû"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "È·¶¨"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "¹Ø±Õ"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "ÕýÔÚ³¢ÊÔÁ¬½Ó..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "ÕýÔڶϿªÁ¬½Ó..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Á¬½Óδ¶Ï¿ª.\n"
-#~ "ÔËÐÐ\n"
-#~ "/etc/sysconfig/network-script/net_cnx_down\n"
-#~ "¶Ï¿ªÁ¬½Ó."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "ÄúÏÖÔÚûÓÐÁ¬½Óµ½»¥ÁªÍø"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Òª°²×°Èí¼þ°üµÄ¿Õ¼ä"
-
-#~ msgid "Total size: "
-#~ msgstr "×ܹ²´óС:"
-
-#~ msgid "Please wait, "
-#~ msgstr "ÇëÉÔºò, "
-
-#~ msgid "Total time "
-#~ msgstr "×ܹ²Ê±¼ä"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "¶Ô X11 ʹÓÃÏÖÓеÄÅäÖÃ?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "ÄúµÄ´òÓ¡»úÁ¬½ÓÔÚÄĸöÉ豸¶Ë¿Ú\n"
-#~ "(Çë×¢Òâ /dev/lp0 Ï൱ÓÚ LPT1)?\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "¾¯¸æ, Õâ¸öÍø¿¨ÒѾ­ÅäÖùýÁË.\n"
-#~ "ÒªÖØÐÂÅäÖÃ."
-
-#~ msgid "New"
-#~ msgstr "н¨"
-
-#~ msgid "Remote"
-#~ msgstr "Ô¶¶Ë"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "Çëµã»÷ÒÔÉϵİ´Å¥\n"
-#~ "\n"
-#~ "»òʹÓà \"н¨\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "ʹÓà \"н¨\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "Èç¹ûÉÏÊöÁбíÖÐûÓÐÄãÒªµÄÏî, ÇëÊäÈë:"
-
-#~ msgid "Shared resource"
-#~ msgstr "¹²Ïí×ÊÔ´"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "ÎÒ²»Ã÷°×ÄúµÄÒâ˼ (%s) £¬Çë¸üÃ÷È·µÄÖ¸¶¨\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr "? (ȱʡ %s) "
-
-#~ msgid "Your choice? (default %s  enter `none' for none) "
-#~ msgstr "ÄúµÄÑ¡Ôñ ? (ȱʡ %s  Èç¹ûûÓÐ ÊäÈë `none') "
diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
deleted file mode 100644
index aca583f19..000000000
--- a/perl-install/share/po/zh_TW.po
+++ /dev/null
@@ -1,11721 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Cheng Yuan-Chung <platin@ms31.hinet.net>, 1999
-# Benny Chuang <ben1981@hotmail.com>, 2001
-# Kenduest Lee <kenduest@i18n.linux.org.tw>, 2001, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-12 5:01+CST\n"
-"Last-Translator: Kenduest Lee <kenduest@i18n.linux.org.tw>\n"
-"Language-Team: <zh-l10n@linux.org.tw>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=Big5\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "³]©w©Ò¦³Åã¥Ü¥d"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "¨Ï¥Î Xinerama ©µ¦ù¤ä´©"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "¥u¦³³o³]©w³o±i \"%s\" (%s) ¥d"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "¦h­«Åã¥Ü¥d³]©w"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"±zªº¨t²Î¤ä´©¦h­«Åã¥Ü¥dÀô¹Ò¡C\n"
-"±z¥´ºâ«ç»ò°µ©O¡H"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Åã¥Ü¥d"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "¿ï¨ú±zªºÅã¥Ü¥d"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "¿ï¨ú¦X¾Aªº X ¦øªAµ{¦¡"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ¦øªAµ{¦¡"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "¿ï¨ú¦X¾Aªº X ¦øªAµ{¦¡"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X ¦øªAµ{¦¡"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "±z­n¥Î­þ¤@­Ó XFree ³]©w ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"±zªºÅã¥Ü¥d¦³¤ä´© 3D ¥[³t¥\¯à¡A¦ý¬O¥u¯à°÷°t¦X XFree %s ¤~¯à°÷µo´§§@¥Î¡C\n"
-"±zªºÅã¥Ü¥d°t¦X XFree %s ¦b 2D Åã¥Ü¤W·|¦³¤ñ¸û¦nªº®Ä¯à¡C"
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "±zªºÅã¥Ü¥d·f°t XFree %s ¦³ 3D µwÅé¥[³t¥\¯à¡C"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ¥]§t 3D µwÅé¥[³t¥\¯à"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"±zªºÅã¥Ü¥d·f°t XFree %s ¯à°÷±Ò¥Î 3D µwÅé¥[³t¥\¯à¡C\n"
-"¦ý¬O½Ðª`·N¡A³o¬O¹êÅç©Ê½èªº¤ä´©¶µ¥Ø¡A¦Ó¥B¤W¥i¯à·|¦³¤£¹w´Áªº±¡ªp¡C"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ·f°t¹êÅç©Ê½è 3D µwÅé¥[³t"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"±zªºÅã¥Ü¥d·f°t XFree %s ¤~¯à°÷±Ò¥Î 3D µwÅé¥[³t¥\¯à¡A¦ý¬O½Ðª`·N¡A\n"
-"³o¬O¹êÅç©Ê½èªº¤ä´©¶µ¥Ø¡A¦Ó¥B¤W¥i¯à·|¦³¤£¹w´Áªº±¡ªp¡C±zªºÅã¥Ü¥d\n"
-"·f°t XFree %s ¦b 2D Åã¥Ü¤Wªº¤ä´©«×À³¸Ó·|¤ñ¸û¨}¦n¡C"
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Åã¥Ü¥dÅX°Êµ{¦¡ªº¦w¸Ë)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree ³]©w"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "³]©wÅã¥Ü¥d¤WªºÃ¸¹Ï°O¾ÐÅé¤j¤p"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "¿ï¨ú X ¦øªAµ{¦¡ªº°Ñ¼Æ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "¿ï¨ú¦X¾Aªº¿Ã¹õ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "¿Ã¹õ"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"³o¨â­Ó°Ñ¼Æ¤D¬O±z¿Ã¹õªº««ª½§ó·sÀW²v¡A¥H¤Î«Ü­«­n\n"
-"ªº¤ô¥­§ó·sÀW²v¡A«eªÌ¬O±z¾ã­Ó¿Ã¹õ¼v¹³§ó·sªº¶g´Á¡A\n"
-"«áªÌ¬O¹q¤lºj±½´yªº³t²v¡C\n"
-"\n"
-"±z¥²¶·¯S§Oª`·N¡A¤£­n³]©w¶W¹L¿Ã¹õÀW¼eÅã¥Ü¯à¤Oªº\n"
-"¼Æ­È¡G¹L°ªªºÀW²v¦³¥i¯à¶Ë®`±zÄ_¶Qªº¿Ã¹õ¡C\n"
-"­Y±z¤£½T©w¿Ã¹õ³W®æªº¸Ü¡A½Ð¿ï¾Ü«O¦u¤@ÂIªº³]©w­È¡C"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "¤ô¥­§ó·sÀW²v"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "««ª½§ó·sÀW²v"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "¨S¦³§¹¦¨³]©w¿Ã¹õªº°Ê§@"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "©|¥¼§¹¦¨Åã¥Ü¥dªº³]©w"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "©|¥¼¿ï¨ú­n¨Ï¥Îªº¸ÑªR«×"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "±z·Q­n´ú¸Õ±zªº³]©w­È¶Ü ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ĵ§i¡G¦b³o±i¥d¤W­±§@Åã¥Ü´ú¸Õ®É¥i¯à·|Åý±z¨t²Î°±¤î¦^À³"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "´ú¸Õ³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"½Ð¸ÕµÛ¥h§ó§ï¤@¨Ç°Ñ¼Æªº³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "µo¥Í¿ù»~¡G"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d ¬í¤ºÂ÷¶}"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "³o­Ó³]©w­È¥¿½T¶Ü¡H"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "µo¥Í¿ù»~¡A½Ð¸ÕµÛ§ó§ï¤@¨Ç°Ñ¼Æªº³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "¸ÑªR«×"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "¿ï¨ú¸ÑªR«×¥H¤ÎÃC¦â¼Æ"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Åã¥Ü¥d: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ¦øªAµ{¦¡¡G %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "§ó¦h"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "½T©w"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "±M®a¼Ò¦¡"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Åã¥Ü¥þ³¡"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "¸ÑªR«×"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Áä½Lªº§Î¦¡¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "·Æ¹«ªººØÃþ¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "·Æ¹«³s±µªº¦ì¸m¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "¿Ã¹õ¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "¿Ã¹õ¤ô¥­§ó·sÀW²v¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "¿Ã¹õ««ª½§ó·sÀW²v¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Åã¥Ü¥d¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Åã¥Ü¥dÃѧO¸ê®Æ¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ø¹Ï°O¾ÐÅé¡G %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "ÃC¦â²`«×¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "¸ÑªR«×¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ¦øªAµ{¦¡¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ÅX°Êµ{¦¡¡G %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "¥¿¦b·Ç³Æ X-Window ªº³]©w"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "±z¥´ºâ«ç»ò§@ ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "§ïÅܿùõ³]©w"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "§ïÅÜÅã¥Ü¥d³]©w"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "§ïÅܦøªAµ{¦¡ªº°Ñ¼Æ³]©w"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "§ïÅܸѪR«×³]©w"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Åã¥Ü©Ò¦³¸ê°T"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "¦A¦¸´ú¸Õ³]©w­È"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "µ²§ô"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Àx¦s¥Ø«eªºÅܧó¡H\n"
-"¥Ø«eªº²ÕºA¬O¡G\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "¶}¾÷®É±Ò°Ê X Àô¹Ò"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"µ{¦¡¥i¥HÀ°±z³]©w¦b¶}¾÷®É¦Û°Ê¶i¤J X Àô¹Ò¡A\n"
-"±z§Æ±æ¦b­«·s¶}¾÷¥H«á´N¦Û°Ê¶i¤J X Àô¹Ò¶Ü ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "½Ð­«·sµn¤J %s ¦nÅýÅܧó¥Í®Ä"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "½Ðµn¥X¡AµM«á¥Î Ctrl-Alt-BackSpace ­«·s±Ò°Ê X"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ¦â (8 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "3 ¸U 2 ¤d¦â (15 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "6 ¸U 5 ¤d¦â (16 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "1 ¤d 6 ¦Ê¸U¦â (24 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 »õ¦â (32 ¦ì¤¸)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "16 MB ©ÎªÌ§ó¦h"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor that can do 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor that can do 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "¶}¾÷¤À³Î°Ïªº²Ä¤@­ÓºÏ°Ï"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "µwºÐªº²Ä¤@­ÓºÏ°Ï (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO ¦w¸Ë"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "±z­n±N¶}¾÷µ{¦¡¦w¸Ë¦b¨º­Ó¦ì¸m ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "¦w¸Ë LILO ©Î GRUB"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SLILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "¤å¦r¿ï³æ LILO µ{¦¡"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "¹Ï§Î¤¶­± LILO µ{¦¡"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub ¶}¾÷µ{¦¡"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "¥ÑDOS/Windows¶}¾÷(¨Ï¥Îloadlinµ{¦¡)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "¶}¾÷µ{¦¡¥D­n¿ï¶µ"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "­n¨Ï¥Î¨º­Ó¶}¾÷µ{¦¡"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "¦w¸Ë¶}¾÷µ{¦¡"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "¶}¾÷¸Ë¸m"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA ¼Ò¦¡(¬Y¨Ç«¬ BIOS ¤WµLªk¨Ï¥Î)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "ºò±K¼Ò¦¡"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "ºò±K¼Ò¦¡"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Åã¥Ü¼Ò¦¡"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "¦b±Ò°Ê§@·~¨t²Î«e¥ý©µ¿ðªº®É¶¡"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "±K½X"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "±K½X½T»{"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "­­¨î¦b boot: «ü¥O¦æ¿é¤J°Ñ¼Æ"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "­­¨î°Ñ¼Æ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "¨C¦¸¶}¾÷®É¦Û°Ê²M²z /tmp ¥Ø¿ý¼È¦sÀÉ"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "»Ý­nªº¸Ü¡A¿é¤J¥¿½Tªº°O¾ÐÅé¤j¤p (§ä¨ì %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "¨Ï¥Î¦h­«³]©wÀÉ"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "¿é¤J°O¾ÐÅé¤j¤p (¥H MB ¬°³æ¦ì)"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "¿ï¶µ¡u­­¨î«ü¥O¦æ°Ñ¼Æ¡v¦b¨S¦³³]©w±K½Xªº±¡ªp¤U·|¥¢®Ä"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "½Ð¦A¸Õ¤@¦¸"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "¿é¤Jªº±K½X¤£²Å¦X"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "±Ò°Ê°T®§"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "¶}±Ò Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "®Ö¤ß±Ò°Ê®É¶¡¹O®É®É¶¡"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "¤¹³\ CD ¶}¾÷¡H"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "¤¹³\ OF ¶}¾÷ ¡H"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "¹w³] OS ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"¤U­±ÁÙ¦³¤@¨Ç¨ä¥Lªº¿ï¶µ¡A±z¥i¥H¿ï¾Ü·s¼W©Î\n"
-"­×§ï¬J¦³ªº¿ï¶µ¡C"
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "·s¼W"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "§¹¦¨"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "­×§ï"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "±z­n·s¼W­þ¤@Ãþªº¶µ¥Ø ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "¨ä¥L§@·~¨t²Î (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "¨ä¥L§@·~¨t²Î (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "¨ä¥L§@·~¨t²Î (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "®Ö¤ß"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "/ ¤À³Î°Ï"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "ªþ¥[°Ñ¼Æ"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "/ ¥iŪ¼g"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "¤À³Îªí"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "¸Ñ°£ºÏºÐÀˬd"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "¼ÐÅÒ"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "¹w³]¶}¾÷"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd ¤j¤p"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "²¾°£¶µ¥Ø"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "¼ÐÅÒ¤£¥i¥HªÅ¥Õ"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "±z»Ý­n«ü©w¤@­Ó®Ö¤ß¶}¾÷ÀÉ®×"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "±z»Ý­n«ü©w¤@­Ó root ¤À³Î°Ï"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "³o­Ó¼ÐÅÒ¤w¸g¥Î¹L¤F"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "§ä¨ì %s %s ¤¶­±"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "±zÁÙ¦³¨ä¥Lªº¶Ü?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¨t²Î¤W¬O§_¦³¥ô¦ó %s ¤¶­±?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "§_"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "¬Oªº"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "À˵øµwÅé¸ê°T"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "¥¿¦b¦w¸Ë %s ¥d %s ªºÅX°Êµ{¦¡"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(¼Ò²Õ %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "§ÚÀ³¸Ó¸Õ¨º­Ó %s ÅX°Êµ{¦¡©O?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"ÁöµM¤j³¡¤À®É­Ô¤£»Ý­nÃB¥~ªº°Ñ¼Æ¡A¥i¬O¦³¨Ç®É­Ô %s ªºÅX°Ê\n"
-"µ{¦¡»Ý­n¥[¤W¤@¨Ç°Ñ¼Æ¤~¯à¥¿±`¹B§@¡F±z­n«ü©wÃB¥~ªº°Ñ¼Æµ¹\n"
-"ÅX°Êµ{¦¡¡AÁÙ¬OÅýµ{¦¡¦Û¦æ°»´úµwÅé³]©w©O? ¦³®É­Ô¦Û°Ê°»´ú\n"
-"·|Åý¹q¸£·í¾÷¡A¤£¹LÀ³¸Ó¤£¦Ü©ó³y¦¨¥ô¦ó¶Ë®`¤~¹ï¡C"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "¦Û°Ê°»´ú"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "«ü©w°Ñ¼Æ"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"±z¤]³\»Ý­n¬°¸Ó¼Ò²Õ %s «ü©w¬ÛÃö¿ï¶µ¡C½Ðª`·N¤@¤U¡A\n"
-"¿é¤Jªº°O¾ÐÅé¦ì¸m±Ô­z¡AÀ³¸Ó¨Ï¥Î 0x ¶}ÀY¡A¤ñ¤è¹³¬O¡u0x123¡v"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"±z²{¦b¥i¥H¿é¤J­nµ¹ %s ¼Ò²Õ¨Ï¥Îªº°Ñ¼Æ¡C\n"
-"°Ñ¼Æªº®æ¦¡¬° \"name=value name2=value2 ...\"\n"
-"¨Ò¦p¡uio=0x300 irq=7¡v"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "¼Ò²Õ°Ñ¼Æ¡G"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"¸ü¤J %s ¼Ò²Õ¥¢±Ñ¡A\n"
-"±z­n¥Î¨ä¥L°Ñ¼Æ¦A¸Õ¤@¦¸¶Ü?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "¦s¨ú X µo¥Í¿ù»~"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "¦s¨ú rpm ¤u¨ãµ{¦¡"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "¤¹³\¡usu¡v"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "¦s¨ú¨t²Î­±ªº³]©wÀÉ"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "( %s ¤w¸g¥[¤J)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "¿é¤Jªº±K½X¤Ó²³æ¤F"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "½Ð¿é¤J¨Ï¥ÎªÌ±b¸¹"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "¨Ï¥ÎªÌ±b¸¹¥u¯à§t¦³¤p¼g­^¤å¦r¥À¡B¼Æ¦r¡B `-' ©Î `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "³o­Ó¨Ï¥ÎªÌ¤w¸g¦s¦b¤F"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "·s¼W¨Ï¥ÎªÌ"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"¿é¤J¤@¦ì¨Ï¥ÎªÌ±b¸¹\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "±µ¨ü¨Ï¥ÎªÌ"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "¨Ï¥ÎªÌ¦WºÙ"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "¨Ï¥ÎªÌ±b¸¹"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell µ{¦¡"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "¹Ï¥Ü"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "¦Û°Êµn¤J"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"²{¦b¯à°÷³]©w©ó¶}¾÷«á¦Û°Ê¥H¬Y­Ó¨Ï¥ÎªÌ¨­¥÷µn¤J¨t²Î¡C\n"
-"±z­n¨Ï¥Î³o­Ó¥\¯à¶Ü¡H"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "½Ð¿ï¨ú¹w³]ªº¨Ï¥ÎªÌ¡G"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "¿ï¨ú±z·Q¨Ï¥Îªºµøµ¡ºÞ²zµ{¦¡¡G"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "½Ð¿ï¾Ü­n¨Ï¥Î¨º­Ó»y¨t¡C"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "±z¥i¥H¿ï¾Ü¦b¦w¸Ë§¹¦¨¥H«á¨Ï¥Î¨ä¥Lªº»y¨¥"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "©Ò¦³"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "¤¹³\©Ò¦³¨Ï¥ÎªÌ"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "¦Û­q"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "¤£¤À¨É"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "³o­Ó %s ®M¥ó»Ý­n¦w¸Ë¤W¡A±z­n¦w¸Ë¸Ó®M¥ó¶Ü¡H"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "±z¯à°÷¤À¨É¥X NFS ©ÎªÌ¬O Samba ¸ê·½¡C±z¥´ºâ¥Î¨º­Ó"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "¿ù»~! %s ®M¥ó¥¼¦w¸Ë©ÎªÌ¬O¿ò¥¢"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "¨ú®ø"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "±Ò°Ê userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"¨C­Ó¨Ï¥ÎªÌªº¤À¨É³£¬O¨Ï¥Î¡yfileshare¡z¸Ó¸s²Õªº³]©w¡C\n"
-"±z¥i¥H°õ¦æ¡yuserdrake¡zµ{¦¡¦b¸Ó¸s²Õ¤º¥[¤J¨Ï¥ÎªÌ§Y¥i¡C"
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "¦H"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "®t"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "¼Ð·Ç"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "°ª"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "¸û°ª"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "ÄY±K"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"§â¦w¥þ¾÷¨î³]©w¦b³o­Óµ¥¯Å®É¥²¶·­n«D±`ÂÔ·V¡A\n"
-"¥¦·|Åý±zªº¨t²Î¥Î°_¨Ó§ó¥[²©ö¤è«K¡A¥i¬O«o·¥©ö\n"
-"¨ü¨ì¯}Ãa: ³o­Ó³]©w¤£À³¸Ó³Q¥Î¦b¦³³s½u¨ìInternet\n"
-"ªº¥D¾÷¡A¦]¬°©Ò¦³ªº¦s¨ú°Ê§@³£¨S¦³¥Î±K½X¥[¥H\n"
-"­­¨î¡C"
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "¤w±Ò°Ê±K½X»{ÃÒ¥\¯à¡A¦ý¤´µM¤£«Øij±N¦¹¨t²Î¹B§@©óºô¸ô¤Wºô¸ôÀô¹Ò¡C"
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr "¼Ð·Çªº¨t²Î¦w¥þ©Ê³]©w¡A«Øij¥Î¦b¦³¹ï¥~³s½uªº¥D¾÷¤W¨Ï¥Î¡C"
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr "¥]§t¤F¬ÛÃö¦s¨ú­­¨î¡A¥H¤Î¨C¤é©w´Á¨t²Î½]®ÖÀˬd°Ê§@¡C"
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr "°ª«×ªº¦w¥þ©Ê¬ÛÃöªºÀˬd»P³]©w¡A¾A¦X´£¨Ñ¦b¬[³]¹ï¥~ªA°Èªº¦øªA¾¹¨Ï¥Î¡C"
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"»P¤W¤@­Ó¼Ò¦¡¬Û¦P¡A¤£¹L¾ã­Ó¨t²Î´X¥G³£¬O«Ê³¬ªº¡C¨t²Î¾ã­Ó¦w¥þ³]©w¾÷¨î³£¬O¦b³ÌÄY"
-"±Kªºª¬ºA¡C"
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "¿ï¨ú¦w¥þµ¥¯Å"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "¦w¥þµ¥¯Å"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "±Ò¥Î¡ulibsafe¡v¨¾Å@¥\¯à"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "¯à°÷°»´ú¨¾¿m½w½Ä°Ï·¸¦ì»P®æ¦¡¤Æ¦r¦ê³oÃþ§ðÀ»ªºµ{¦¡®w®M¥ó¡C"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot ¨S¦³¨¬°÷ªºªÅ¶¡"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "®à­±"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "¶}©l¥\¯àªí"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "±z¤£¯à§â¶}¾÷ºÞ²zµ{¦¡¦w¸Ë¦b %s ¤À³Î°Ï¤W\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "©|¥¼¹ê§@¨D§U¥\¯à\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "¶}¾÷¼Ë¦¡²ÕºA³]©w"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "_File"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "File/_Quit"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditional Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditional Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "¶}¾÷®É±Ò°Ê Aurora ¹Ï§Î¤¶­±"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub ¼Ò¦¡"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot ¼Ò¦¡"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"§A¥Ø«e¬O¿ï¥Î %s ·í§@±z¥Ø«eªº¶}¾÷ºÞ²zµ{¦¡¡C\n"
-"±z¥i¥HÂI¿ï³]©w¨Ó±Ò°Ê³]©wºëÆF"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "³]©w"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "¨t²Î¼Ò¦¡"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "¶}¾÷®É±Ò°Ê X Window ¹Ï§Î§@·~Àô¹Ò"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "¤£¡A§Ú¤£»Ý­n¦Û°Êµn¤J (AutoLogin)"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "¬Oªº¡A§Ú»Ý­n¥Î³o­Ó (¨Ï¥ÎªÌ¡B®à­±) ¨Ó¦Û°Êµn¤J"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "½T©w"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "µLªk¶}±Ò /etc/inittab Àɮ׶i¦æŪ¨ú¡G %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ¤ÀÄÁ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ¤ÀÄÁ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ’"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "¦b©|¥¼¶i¦æ¤À³Î«eµLªk´£¨Ñµe­±®·®»¥\¯à"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "¦b¦w¸Ë %s «á´N¯à°÷´£¨Ñµe­±®·®»¥\¯à"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "ªk°ê"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "­ô´µ¤j¾¤¥["
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "¤ñ§Q®É"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "±¶§J¦@©M°ê"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "¼w°ê"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "§Æþ"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "®¿«Â"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "·ç¨å"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "²üÄõ"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "¸q¤j§Q"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "¿D¬w"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "¬ü°ê"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "½Ð±z¥ý³Æ¥÷±zªº¸ê®Æ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "½Ð¸Ô²Ó¾\Ū!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"¦pªG§A¥´ºâ¨Ï¥Î aboot µ{¦¡ªº¸Ü¡A½Ðª`·N±z¦Ü¤Ö»Ý­n¦b©óºÏºÐ³Ì«eºÝ«O¯d¤@¶ô¥i¥ÎªºªÅ"
-"¶¡ (2048 ºÏ°Ï´N¨¬°÷¤F)¡C"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "¿ù»~"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "ºëÆF"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "¿ï¾Ü°Ê§@"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"±z¦³¤@­Ó«Ü¤jªº fat ¤À³Î°Ï (MicroSoft ªº\n"
-"Dos/Windows §@·~¨t²Î¥Îªº®æ¦¡)¡A«Øij±z­«\n"
-"³]³o­Ó¤À³Î°Ïªº¤j¤p (ÂI¿ï³o­Ó¤À³Î°Ï¡AµM\n"
-"«á«ö \"§ïÅܤj¤p\" )"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "½ÐÂI¿ï¤@­Ó¤À³Î°Ï"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "¸Ô²Ó¸ê°T"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Empty"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "¨ä¥L"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Àɮרt²Î®æ¦¡¡G"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "·s«Ø"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "®æ¦¡"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "¥Î¡y%s¡z¥N´À"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "§R°£"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "­n¥ý ``Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "§ïÅܤÀ³Î°Ï %s ªº®æ¦¡¥H«á¡A©Ò¦³¦b³o­Ó¤À³Î°Ï¤Wªº¸ê®Æ³£·|³Q²M°£"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "¿ï¾Ü¤À³Î°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "¿ï¾Ü¥t¤@­Ó¤À³Î°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Â÷¶}"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "¤Á´«¨ì±M®a¼Ò¦¡"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "¤Á´«¨ì¤@¯ë¼Ò¦¡"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "´_­ì"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "¤£ºÞ¦p¦ó³£­nÄ~Äò¶Ü ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "¤£Àx¦s´NÂ÷¶}"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "©ñ±ó¼g¤JµwºÐ¤À³Îªí´NÂ÷¶}¡H"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "±z·Q­nÀx¦s /etc/fstab Àɮתº­×§ï¶Ü¡H"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "¦Û°Ê¤À°t"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "¥þ³¡²M°£"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "µwºÐ¸ê°T"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "¥D¤À³Î°Ï¼Æ¥Ø¤w¸gº¡¤F"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "µ{¦¡µLªk¦A·s¼W¥ô¦ó¤À³Î°Ï¤F"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "»Ý­n¦³§ó¦hªº¤À³Î°Ïªº¸Ü¡A½Ð§R°£¤@­Ó¥D¤À³Î°Ï¥H«Ø¥ß©µ¦ù¤À³Î°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "¼g¤JµwºÐ¤À³Îªí"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "¦^¦sµwºÐ¤À³Îªí"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "·m±ÏµwºÐ¤À³Îªí"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "¸ü¤JµwºÐ¤À³Îªí"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "©â¨ú¦¡¸Ë¸m¦Û°Ê±¾¸ü"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "¿ï¾ÜÀÉ®×"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"³Æ¥÷ªºµwºÐ¤À³Îªí¦³¤£¤@¼Ëªº¤j¤p\n"
-"ÁÙ­nÄ~Äò ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "ĵ§i"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"´¡¤J³nºÐ¤ù\n"
-"©Ò¦³¦b³o¤ù³nºÐ¤¤ªº¸ê®Æ³£±N³Q²M°£"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "¥¿¦b¸Õ¹Ï±Ï¦^µwºÐ¤À³Îªí"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "¸Ô²Ó¸ê°T"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "±¾¸üÂI"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "¿ï¶µ"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Åܧó¤j¤p"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "²¾°Ê"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "®æ¦¡¤Æ"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "±¾¸ü"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "¥[¤JºÏºÐ°}¦C"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "¥[¤JºÏºÐ°}¦C"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "¨ø¸ü"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "¥ÑºÏºÐ°}¦C¤¤²¾°£"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "¥ÑºÏºÐ°}¦C¤¤²¾°£"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "ÅܧóºÏºÐ°}¦C³]©w"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "§@¬° loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "«Ø¥ß·sªº¤À³Î°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "¶}©lªººÏ°Ï¡G "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "¤j¤p (MB)¡G "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Àɮרt²Î®æ¦¡¡G "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "±¾¸üÂI¡G"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "³]©w­È¡G"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "²¾°£Â¶¦^¸Ë¸m (loopback) ÀɮסH"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "§ïÅܤÀ³Î°Ï®æ¦¡"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "±z­n¥Î¨º¤@ºØÀɮרt²Î¡H"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "¥Ñ ext2 ¥¿¦b¤Á´«¨ì ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "±z­n§â loopback ÀÉ®× %s ±¾¸ü¦b¨º¸Ì ?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "±z­n§â³o­Ó¸Ë¸m %s ±¾¸ü¦b¨º¸Ì ?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"¦]¬°³o­Ó¤À³Î°Ï³Q¥Î§@ loop back ¨Ï¥Î¡A©Ò¥HµLªk¸Ñ°£\n"
-"³o­Ó±¾¸üÂI¡F½Ð¥ý¨ú®ø loopback ªº³]©w¡C"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "¥¿¦b­pºâ fat ¤À³Î°ÏªºÃä¬É"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "¥¿¦b­«³]¤j¤p"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "³o­Ó¤À³Î°ÏµLªk½Õ¾ã¤j¤p"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "©Ò¦³¦b³o­Ó¤À³Î°Ï¤Wªº¸ê®Æ³£À³¸Ó¥ý¸g¹L³Æ¥÷"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "¦b§ïÅܤÀ³Î°Ï %s ªº¤j¤p¥H«á¡A©Ò¦³¦b³o­Ó¤À³Î°Ï¤Wªº¸ê®Æ³£·|³Q²M°£"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "¿ï¨ú·sªº¤j¤p"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "·s¤j¤p (MB)¡G "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "±z­n²¾°Ê¨ì¨º­ÓºÏºÐ¾÷ ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "ºÏ°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "±z­n²¾°Ê¨ì¨º­ÓºÏ°Ï¡H"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "¥¿¦b²¾°Ê"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "¥¿¦b²¾°Ê¤À³Î°Ï..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "¿ï¨ú­n¥[¤JªººÏºÐ°}¦C"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "·sªº"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "¿ï¨ú­n¥[¤JªººÏºÐ°}¦C"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ¦WºÙ¡H"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "³o­Ó¤À³Î°Ï¤£¯à¥Î¨Ó§@¬° loopback ¸Ë¸m"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback ÀɮצWºÙ¡G"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "¿é¤JÀɮצWºÙ"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Àɮפw³Q¥Î¨Ó§@¬°¨ä¥Lªº loopback¡A½Ð¿ï¾Ü¨ä¥LÀÉ®×"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Àɮפw¸g¦s¦b¤F¡A­n¨Ï¥Î³o­ÓÀɮ׶Ü?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "±¾¸ü°Ñ¼Æ"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "¸Ë¸m"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "¶¥¼h"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "²Õ¶ô¤j¤p"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "½Ð¤p¤ß¡A³o­Ó°Ê§@«D±`¦MÀI¡C"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "¥H¨ººØ¤è¦¡¤À³Î¡H"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"¤£¦n·N«ä¡Aµ{¦¡¤£±µ¨ü¦b³o­ÓºÏºÐ¤W«Ø¥ß /boot ¤À³Î°Ïªº«ü¥O (ºÏ¬W > 1024).\n"
-"¦]¬° LILO ·|¥¢®Ä¾É­PµLªk¶}¾÷¡F­Y±z¤£¥Î LILO¡A®Ú¥»¤£»Ý­n /boot ¤À³Î°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"±z¿ï¨ú§@¬°®Ú¥Ø¿ý (/) ªº¤À³Î°Ï¦ì¸m¦bµwºÐªº²Ä 1024 ­ÓºÏ¬W¤§«á¡A\n"
-"¦Ó¥B±z¤]¨S¦³³]©w /root ¤À³Î°Ï¡A°²¦p±z·Ç³Æ¥Î LILO ·í¶}¾÷µ{¦¡ªº¸Ü¡A\n"
-"°O±o­n¥[¤J¤@­Ó /boot ¤À³Î°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"§A¤w¸g¿ï¾Ü¤F¤@¶ô software RAID ªº¤À³Î°Ï·í§@¬° ®Ú¤À³Î°Ï (/) ªº±¾¸üÂI\n"
-"±z­n¥t¥~¹º¤À¤@­Ó¤£¬O¦b software RAID ªº¤À³Î°Ï§@¬° /boot ªº±¾¸üÂI¨Ï¥Î¡A\n"
-"¦p¦¹¶}¾÷ºÞ²zµ{¦¡¤~¯à°÷¥¿±`±Ò°Ê±zªº¨t²Î¡C"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "·Ç³Æ¼g¤JºÏºÐ %s ªºµwºÐ¤À³Îªí!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "±z»Ý­n­«·s¶}¾÷¥H«K©óÅý²§°Êªº³]©w¥Í®Ä"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "¦b¹ï¤À³Î°Ï %s ¶i¦æ®æ¦¡¤Æªº°Ê§@¥H«á¡A©Ò¦³¦b³o­Ó¤À³Î°Ï¤Wªº¸ê®Æ³£·|³Q²M°£"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "¥¿¦b®æ¦¡¤Æ"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "¥¿¦b®æ¦¡¤Æ loopback ÀÉ®× %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "¥¿¦b®æ¦¡¤Æ¤À³Î°Ï %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "ÁôÂÃÀÉ®×"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "±NÀÉ®×·h²¾¨ì·sªº¤À³Î°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"%s ¥Ø¿ý¤w¸g¥]§t¤F¸ê®Æ¤F\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "¥¿¦b±NÀÉ®×·h²¾¨ì·sªº¤À³Î°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "¥¿¦b½Æ»s %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "¥¿¦b²¾°£ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "¸Ó¤À³Î°Ï %s ¥Ø«e¬° %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "¸Ë¸m¡G"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ©³¤UªººÏºÐ¥N¸¹¡G %s (²q´ú­È¡A¶È¨Ñ°Ñ¦Ò)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "®æ¦¡¡G"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "¦WºÙ¡G"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "¶}©l: ²Ä %s ºÏ°Ï\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "¤j¤p¡G %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr "¡A²Ä %s ºÏ°Ï"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "²Ä %d ºÏ¬W¨ì²Ä %d ºÏ¬W\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "¤w®æ¦¡¤Æ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "¥¼®æ¦¡¤Æ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "¤w±¾¸ü\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "ºÏºÐ°}¦C (RAID) md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"¶¦^¸Ë¸m (loopback) ÀÉ®×:\n"
-"   %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"¹w³]¶}¾÷ªº¤À³Î°Ï\n"
-"    (µ¹ MS-DOS ¶}¾÷µ{¦¡¥Îªº, ¸ò lilo µLÃö)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "RAID ¶¥¼h %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "²Õ¶ô¤j¤p %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID ºÏºÐ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback ÀɮצWºÙ¡G %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Chances are,³o­Ó¤À³Î°Ï¬Ý°_¨Ó¦ü¥G\n"
-"¬O³z¹LÅX°Êµ{¦¡²£¥Í¥X¨Óªº¡C©Ò¥H\n"
-"±zÀ³¸Ó¤£­n¥h²§°Ê³o­Ó¤À³Î°Ï¸ê®Æ¡C\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"³o¬O¤@­Ó¥Î¨Ó§@¬°¦h­«¶}¾÷\n"
-"¨Ï¥Îªº¯S®í¤À³Î°Ï¡C\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "¤j¤p¡G %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "µwºÐ¸ê°T¡G %s ºÏ¬W, %s Ū¼gÀY, %s ºÏ°Ï\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "¸ê°T¡G"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM ºÏºÐ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "µwºÐ¤À³Îªí§Î¦¡¡G %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "¦ì¦b bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "¿ï¶µ¡G %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Àɮרt²Î¥[±Kª÷Æ_"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "¿ï¾Ü±zÀɮרt²Î©Ò¨Ï¥Îªº¥[±Kª÷Æ_"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "³o­Ó±K½X¤Ó²³æ¤F (¤@©w¦Ü¤Ö­n¦³ %d ­Ó¦r¤¸¤~¦æ)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "¿é¤Jªº¥[±Kª÷Æ_¤£²Å¦X"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "¥[±Kª÷Æ_"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "¦A¦¸¿é¤J¥[±Kª÷Æ_"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "§ïÅܤÀ³Î°Ï®æ¦¡"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "½ÐÂI¿ï¤@­ÓºÏºÐ"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "·j´M¦øªA¾¹"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "¥H %s ®æ¦¡¤Æ %s ¥¢±Ñ"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "¤£ª¾¹D­n¦p¦ó±N %s ®æ¦¡¤Æ¬° %s ®æ¦¡"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "±N %s ¤À³Î°Ï±¾¸ü©ó %s ¥Ø¿ý®Éµo¥Í¿ù»~"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck ¥¢±Ñ¡A¶Ç¦^ %d ¿ù»~¥N½X©ÎªÌ¬O %d «H¸¹"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "¨ø¤U %s ªº±¾¸ü®Éµo¥Í¿ù»~¡G %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr ""
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "¤p©ó 16MB ªº¤À³Î°Ï¤£¯à³]¦¨ JFS ®æ¦¡"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "¤p©ó 32MB ªº¤À³Î°Ï¤£¯à³]¦¨ ReiserFS ®æ¦¡"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "«ü©wªº±¾¸üÂI»Ý¥H / ¶}ÀY"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "¤w¸g¦³¤À³Î°Ï¤À°t¨ì±¾¸üÂI %s ¤F\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "±z¤£¯à¨Ï¥Î LVM Logical Volume ¨Ó³Ì¬° %s ªº±¾¸üÂI"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "±z»Ý­n¤@­Ó¯u¥¿ªº¤À³Î°Ï (ext2, reiserfs) ¨Ó©ñ³o­Ó±¾¸üÂI\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "±z¤£¯à¨Ï¥Î½s±K¹LªºÀɮרt²Î¨Ó³Ì¬° %s ªº±¾¸üÂI"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "¨S¦³¨¬°÷ªºªÅ¶¡¯à°÷¦Û°Ê°t¸m"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "¨S¦³°µ¥ô¦ó°Ê§@"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "¥¿¦b¶}±Ò %s ¥H¼g¤JÀɮ׮ɵo¥Í¿ù»~¡G %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"µo¥Í¤F¤@­Ó¿ù»~ - §ä¤£¨ì¥ô¦ó¥i¥Îªº¸Ë¸m¥i¥H¥Î¨Ó«Ø¥ß·sªºÀɮרt²Î¡A½ÐÀˬd±zªºµwÅé"
-"ª¬ªp¥H§ä¥X°ÝÃDªº"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "±z¨S¦³¥ô¦ó¥i¥Îªº¤À³Î°Ï !"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"¡uGNU/Linux¡v¬O¤@­Ó¦h¤Hªº¨t²Î¡A²³æ»¡¨C­Ó¨Ï¥ÎªÌ³£¦³¨ä¿W¥ßªº§@·~Àô¹Ò¡C±z¥i¥H¸Ô"
-"¾\¡yUser Guide¡z¤å¥ó»¡©ú¥H«K©ó±oª¾§ó¦h¸ê°T¡C¨t²Î¦³¤@­Ó±b¸¹¬° \"root\"¡A³o¬O¨t"
-"²ÎªººÞ²zªÌ¡C¨t²ÎºÞ²zªÌ¯à°÷Åܧó¨t²Î©Ò¦³³]©w¡A¥]§t¨Ï¥ÎªÌªºÀɮ׸ê®Æ¡C¹ê»Ú¤W¨Ï¥Î"
-"¨t²Î®É¡A±z»Ý­n«Ø¥ß¤@­Ó¤@¯ë¨Ï¥ÎªÌ±b¸¹¶i¦æ¤@¯ë¨Æ°È¾Þ§@¡A·í»Ý­n¶i¦æ¨t²ÎºÞ²zºûÅ@"
-"®É¡A¤~»Ý­n¤Á´«¦¨¬°¨t²ÎºÞ²zªÌ¨­¥÷¨Ó³B²z¡C¦Ó¥Ñ©ó¨t²ÎºÞ²zªÌ¦³³Ì°ªªºÅv§Q¡A©Ò¥H¤£"
-"·í¾Þ§@¨t²Î®É¡A¦³¥i¯à»´©öªºÅý¨t²Î³y¦¨¤£¥i¹w´Áªº¿ù»~¡C\n"
-"\n"
-"±µ¤U¨Óªº¨BÆJ¡A¬O«Ø¥ß¨Ï¥ÎªÌ±b¸¹¡A¥]§t³]©w¸Ó¨Ï¥ÎªÌ±K½X¡C¸ê®Æ³£¿é¤J§¹²¦«á¡A½ÐÂI"
-"¿ï\"±µ¨ü¨Ï¥ÎªÌ\"´N¥i¥H«Ø¥ß¸Ó±b¸¹¡C³£¿é¤J§¹¦¨­n¨ì¤U¤@­Ó¨BÆJ®É¡A½Ð¿ï¨ú\"§¹¦¨"
-"\"§Y¥i¡C\n"
-"­Y¬O±z¿ï¾Ü\"¶i¶¥\"«ö¶s¡A¥i¥H³]©w¸Ó¨Ï¥ÎªÌÃB¥~ªº¶µ¥Ø¡C¤ñ¤è¥]§t¸Ó¨Ï¥ÎªÌªºShellµ{"
-"¦¡¦WºÙ¡C"
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"¥Ø«e©Ò¦C¥X¨Óªº¬Oµ{¦¡°»´ú¨ì¥Ø«eªº¤À³Î°Ïª¬ºA¡C\n"
-"«ç»ò¹º¤À¤À³Î°Ï¨Ó¨Ï¥Î¡A±z¥i¥H²³æ¿ï¾ÜºëÆF¼Ò¦¡Åý¦w¸Ëµ{¦¡À°±z\n"
-"¦Û°Ê¨M©w«ç»ò¹º¤À¡A¤@¯ë¨Ó»¡³£¯à°÷±o¨ì¤£¿ùªº¤À°t¤è¦¡¡C\n"
-"¦pªG±z¤â°Ê³B²z¤À³Î°Ï¹º¤Àªº¸Ü¡A°O±o±z¦Ü¤Ö­n©w¸q¥X¤@¶ô·í§@ /\n"
-"¤À³Î°Ï¨Ó¨Ï¥Î¡C\n"
-"¥Ø«e°»´ú¨ì±zªºµwºÐ¤W¦³¦h­Ó Windows ¤À³Î°Ï¡A½Ð¿ï¾Ü±z§Æ±æ­nÁY¤p Windows\n"
-"ªº¤À³Î°Ï¡A¥H«K©ó§âªÅ¶¡®¿¥X¨Ó¦w¸Ë Mandrake Linux §@·~¨t²Î¡C\n"
-"\n"
-"¤U¦C¨C­Ó¤À³Î°Ï³£¦C¥X¤F: \"¦WºÙ\", \"®e¶q\"¡C\n"
-"\n"
-"\"¦WºÙ\" ³£¬O¦³²Î¤@ªº©R¦W¤è¦¡: \"µwºÐÃþ«¬\"¡A\"µwºÐ½s¸¹\"¡A\n"
-"\"¤À³Î°Ï½s¸¹\" (¤ñ¤è¡A\"hda1\")¡C\n"
-"\n"
-"\"µwºÐÃþ«¬\" ³¡¥÷¡AIDE µwºÐ¨Ï¥Î \"hd\"¡ASCSI «h¬O \"sd\"¡C\n"
-"\"µwºÐ½s¸¹\" ³¡¥÷¡A¦ñÀH¦b \"hd\" ©ÎªÌ¬O \"sd\" «á­±¡A¤ñ¤è\n"
-"\n"
-" * \"a\" ³o¬O«ü \"primary IDE controller ¤W²Ä¤@¥x (master) µwºÐ\",\n"
-"\n"
-" * \"b\" ³o¬O«ü \"primmary IDE controller ¤W²Ä¤G¥x (slave) µwºÐ\",\n"
-"\n"
-" * \"c\" ³o¬O«ü \"secondary IDE controller ¤W²Ä¤@¥x (master) µwºÐ\",\n"
-"\n"
-" * \"d\" ³o¬O«ü \"secondary IDE controller ¤W²Ä¤G¥x (slave) µwºÐ\"¡C\n"
-"\n"
-"¥H SCSI µwºÐ¨Ó»¡¡A\"a\" ´N¬O«ü \"SCSI IDE ½s¸¹³Ì¤pªº¨º¤@¥x\", \"b\"\n"
-"´N¬O«ü \"SCSI IDE ½s¸¹¬°¤Gªº¨º¤@¥xµwºÐ\"¡AµM«á¨Ì¦¹Ãþ±À¤U¥h....."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux ¦w¸Ë¤ù¥]§t¼Æ±i¥úºÐ¤ù¡CDrakeX ¦w¸Ëµ{¦¡¦w¸Ë¨ì¬Y­Ó\n"
-"©Ò»Ý­nªº®M¥ó®É¡A·|´£¥Ü±z©ñ¤J©Ò»Ý­nªº¥úºÐ¤ù¡C"
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"¤U­±­n¶i¦æºô¸ôªº³s½u³]©w¡C­Y¬O±z§Æ±æ¯à°÷¦³ºô¸ô³s½u¥\¯à¡A½ÐÂI¿ï¡y½T©w¡z«ö¶s¡C"
-"¤U­±ªº¹Lµ{³£·|¥Ñµ{¦¡¦Û°Ê°»´ú³]©w¡A­Y¬OµLªk¦Û°Ê°»´úªº¸Ü¡A½Ð¤U­±¡y¨Ï¥Î¦Û°Ê°»"
-"´ú¡zªº«ö¶s¨ú®ø¤â°Ê³]©w¤§¡C­Y¬O±z¤£­n³]©wºô¸ôªº¸Ü¡A©ÎªÌ¬O§Æ±æ¨Æ«á¦A³]©w¡A½ÐÂI"
-"¿ï¡y¨ú®ø¡z«ö¶s§Y¥i¡C\n"
-"\n"
-"¡yMandrake-Linux¡z¯à°÷¦b¦w¸Ë®É³]©w¦n Internet ³s½u³]©w¡A¨ä¤¤¥]§t¹³¬O¶Ç²Îªº "
-"Modem ³s½u¡BIDSN Modem ³s½u¡BADSL¡BCable¥H¤Î¤@¯ëªº Lan ³s½u (Ethernet) ¥\"
-"¯à¡C\n"
-"\n"
-"±µ¤U¨Óµe­±¡A½Ð¨Ì·Óµe­±¬ÛÃö«ü¥Ü¿é¤J¬ÛÃö¸ê®Æ§Y¥i¡C­Y¬O±z¤£½T©w±z©Ò»Ý­n¶ñ¤Jªº¬Û"
-"Ãö¶µ¥Ø¡A«Øij½Ð¸ß°Ý±zªººô¸ôºÞ²zªÌ´£¨Ñ¬ÛÃö¸ê°T¡C\n"
-"\n"
-"¬ÛÃöºô¸ô³]©w¡A±z¤]¥i¥H¨Æ«á¦A³z¹L±±¨î¥xºô¸ô³s½u³]©w¨Ó¶i¦æ¡C³o­Ó¨BÆJ­Y¬O±z¤£·Ç"
-"³Æ³]©w¡A¥i¥HÂI¿ï¡y¨ú®ø¡z¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"±µ¤U¨Ó±z»Ý­n¿ï¾Ü§A¥´ºâ©ó±Ò°Ê¨t²Î®É­nÅý¨º¨ÇªA°È°õ¦æ¹B§@¡C\n"
-"\n"
-"©Ò¥X²{ªº©Ò¦³¥i¿ï¾Ü¶µ¥Ø¡A³£¬O¦w¸Ë¹Lµ{¤¤©Ò¦w¸Ë¶i¥hªº¬ÛÃö¨t²ÎªA°È\n"
-"®M¥ó¡C½Ð¥J²Ó¸Ô²Ó¬d¬Ý¨M©w¨º¨ÇªA°È­nÅý¥¦©ó¶}¾÷®É¯à°÷±Ò°Ê¡C\n"
-"\n"
-"·í§A¿ï¨ú¸Ó¶µ¥Ø®É¡A¿Ã¹õ®ÇÃä·|¥X²{¤@­Ó²²¤»¡©ú¡A§i¶D±z³o­ÓªA°È\n"
-"¶µ¥Øªº¥Î³~¡C¹ï¤F¡A­Y¬O±z¹ï©ó¸Ó¶µ¥Ø¹ê¦b¤£½T©w¬O§_­n±Ò¥Îªº¸Ü¡A\n"
-"¤ñ¸û¦w¥þªº§@ªk´N¬Oºû«ù­ì¼Ë¤£­n°Ê§@§Y¥i¡C\n"
-"\n"
-"½Ðª`·N¤@¤U¡A¦pªG±z³o¥x¾÷¾¹¬O±Mªù­n·í§@Internet¦øªA¾¹´£¨Ñºô¸ô¤W\n"
-"¬ÛÃöªA°Èªº¸Ü¡A«Øij±z¸Ô²Ó«ä¦Ò¨M©w¨º¨ÇªA°È­n¶}±ÒÃö³¬¡A¦]¬°¬Y¨Ç\n"
-"ªA°È®M¥ó±Ò°Ê«á¥i¯à·|¦³¤@¨Ç¼ç¦bªº¦w¥þ©Ê­·ÀI°ÝÃD¡C«Øij±z¡A¥u¿ï¨ú\n"
-"­n§A¶}©ñªºªA°È¶µ¥Ø§Y¥i¡C"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (for X Window System)¡AX Àô¹Ò¬O Unix ¨t²Î¤Uªº¤@®MGUI ¹Ï§Î¤¶­±Àô¹Ò¡C¦b¥Ø«e±z"
-"¦w¸Ë¨Ï¥Îªº Mandrake Linux ¤¤¡A§Ú­Ì´£¨Ñ¤F¥i¥H¦bX¤W¹B§@¨Ï¥Îªº¾ã¦X¬O¹Ï§Î¾Þ§@¤¶"
-"­±¡A¤ñ¤è¹³¬O KDE¡BGnome¡BAfterStep¡BWindowMaker µ¥¡C¦b³o­Ó¦a¤è¡ADrakX µ{¦¡±N"
-"·|³]©w¦n±Ò°Ê X ©Ò»Ý­nªº²ÕºAÀô¹Ò¡C\n"
-"\n"
-"³q±` DrakX µ{¦¡¥i¥H«ÜÁo©úªº°»´ú¥X¨t²ÎµwÅéÀô¹Ò¡A°£«D±zªº¨t²ÎµwÅé¹L©ó¦Ñ©Ϊ̬O"
-"¤Ó·s¤F¡A­n¤£µM¤@¯ë¨Ó»¡³£¥i¥H«Ü¶¶§Q°»´ú³]©w¦n¡C·íDrakX°»´ú§¹²¦«á¡A¥¦·|±Ò°ÊXÀô"
-"¹Ò¶i¦æÅã¥Üªº°Ê§@¡AµM«á°T°Ý±z¬O§_¥i¥H¥¿½Tªº¬Ý¨ì¿Ã¹õÅã¥Üªºµe­±¡C\n"
-"\n"
-"­Y¬O§A·íªì¬O¨Ï¥Î \"±M®a«¬\" ¼Ò¦¡¨Ó¦w¸Ëªº¸Ü¡A¦w¸ËºëÆFµ{¦¡±N·|«Ý±z¶i¤J±Ð¸Ô²Óªº"
-"³]©w¹Lµ{¡C¬ÛÃö¸ê°T±z¥i¥H°Ñ¦Ò¤â¥U¤W§ó¶i¤@¨Bªº»¡©ú¡C\n"
-"·í´ú¸Õ¶i¤J X Àô¹Ò®É¡A­Y¬OÅã¥Ü¥¿½T¡A§A¥i¥H¬Ý¨ì¤@­Ó¹ï¸Ü¤è¶ô¸ß°Ý±z¬O§_º¡·N¥Ø«eªº"
-"³]©w¡C·í§A¿ï¾Ü¡yYes¡z½T©w«á¡ADrakXµ{¦¡±N·|Ä~Äò¶i¦æ¤U­±ªº¨BÆJ¡C­Y¬O¶i¤J X Àô¹Ò"
-"´ú¸Õ®Éµo¥Í¿ù»~¡A§A¬Ý¤£¨ì¥ô¦ó¿Ã¹õ¿é¤JÅã¥Ü¡A©ÎªÌ¬O¦b 10 ¬íªº®É¶¡¤º§A¨S¦³¦^À³¹ï"
-"¸Ü¤è¶ô°T°Ý°Ê§@ªº¸Ü¡A´ú¸Õ·|¦Û¦æµ²§ôµM«á«ì´_¤Á´«¨ì­ì¥»ªºµe­±¡A§A¥i¥H¦AÄ~Äò¿ï¾Ü"
-"¬ÛÃö²ÕºA¨Ã´ú¸Õª½¨ì¨S°ÝÃDµ¥¡C"
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"·í²Ä¤@¦¸³]©wXÀô¹Ò²ÕºA®É¡A¤]³\±z¤£¬O«Üº¡·N©Ò³]©w¥X¨Óªºµ²ªG¡C¤ñ¤è§A³]©w¦nªº X "
-"Àô¹Ò¡A¬Ý°_¨Ó¿Ã¹õÅã¥Ü«Ü¤p¡B©ÎªÌ¬O¸ÑªR«×¤£¹ï¡A¬Æ¦Ü¿Ã¹õ¦³°¾²¾µ¥±¡ªp¡C½Ð¤£­n¦Ç"
-"¤ß¡A¦³­@¤ßªº¦h´ú¸Õ´X¦¸´N¥i¥H¦¨¥\¤F¡CDrakXµ{¦¡µ¥µ¥·|¸ß°Ý±z¬O§_º¡·N¥Ø«eªº³]©w"
-"­È¡A§A¥i¥H«ùÄò´ú¸Õ¿ï¾Üª½¨ìº¡·N®É¦A§i¶DDrakXµ{¦¡¥i¥H¨Ï¥Î·í®É±z©Ò¿ï¥Îªº²ÕºA¡C\n"
-"\n"
-"¦pªG§A´ú¸Õ¹Lµ{¤¤¡A¥X²{µLªk¥¿±`±Ò°Ê X Àô¹Òªº±¡ªp¡A¨º¥i¯à¬O¦w¸Ëµ{¦¡¨S¦³¥¿½T°»´ú"
-"¥X§AÅã¥Ü¥dºØÃþ¡A­Y¬O¦p¦¹½Ð¿ï¨ú¡y§ïÅÜÅã¥Ü¥d³]©w¡z¡A¦A¿ï¾Ü¡yUnlisted card¡z¤â°Ê"
-"¿ï¾Ü±z¨t²Î©Ò¦w¸ËªºÅã¥Ü¥d§Y¥i¡C¤@¯ë¨Ó»¡¡A­Y¬Oµ{¦¡µLªk¶¶§Q°»´ú¥X¨t²Î©Ò¨Ï¥ÎªºÅã"
-"¥Ü¥dªº¸Ü¡A¸Ó´ÚÅã¥Ü¥d¥i¯à¤ñ¸û¯S®í¡A¤]³\¤@¯ë¶Ç²ÎªºXFree86 ­ì¥Í©ÊªºÅX°Êµ{¦¡µLªk"
-"ÅX°Ê¸ÓÅã¥Ü¥d¤u§@¡C¦]¦¹·í¦w¸Ëµ{¦¡¥X²{±z­n¨Ï¥Î­þ¤@´Úªº X Server ¶µ¥Ø®É¡A½Ð¿ï¾Ü"
-"¡yFBDev¡z¶µ¥Ø¡C\"FBDev\" ¶µ¥ØªºÅã¥Ü¤è¦¡¬O³z¹L VESA 2.0 ªº¤u·~¼Ð·ÇÅã¥Ü³W®æ¤¶­±"
-"¨ÓÅX°ÊÅã¥Ü¥d¹F¨ìø¹Ïªº¥Øªº¡A¥Ø«e¤@¯ëªº AGP Åã¥Ü¥d³£¨ã³Æ³o­ÓÅã¥Ü¼Ð·Ç³W®æ¡C¿ï¨ú"
-"¦n«á¡A½Ð¿ï¾Ü¡y¦A¦¸´ú¸Õ³]©w­È¡z½T©w©Ò¿ï¾Üªº¶µ¥Ø¬O§_¥¿½T¨S°ÝÃD¡C"
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"³Ì«áªº®É­Ô¡A§AÀ³¸Ó·|¬Ý¨ì¸ß°Ý±z¬O§_­n¦b¶}¾÷§¹¦¨«á\n"
-"ª½±µ¶i¤J¹Ï§Îµn¤J¤¶­±¡C¤@¯ë§Ú­Ì«Øij¡A­Y¬O±zªº¹q¸£\n"
-"¬O¥Î¨Ó·í§@¦øªA¾¹¨Ï¥Îªº¸Ü¡A³o­Ó¶µ¥Ø¥i¥H¿ï¾Ü¡y§_¡z¡A\n"
-"¦]¬°¤@¯ë Server ¦øªA¾¹¨Ã¤£¶] X Àô¹Ò°õ¦æ¬ÛÃöGUI¹Ï§Î\n"
-"¤¶­±³nÅéµ{¦¡¡C"
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM ¤º«Ø´£¨Ñ rescue ±Ï´©¥\¯à¼Ò¦¡¡C±z¥i¥H¦b¨Ï¥Î¦w¸Ë CD ¤ù¶}¾÷"
-"®É¡A«ö¤U F1 Áä¡AµM«á©ó´£¥Ü°T®§®É¿é¤J\"rescue\"§Y¥i¶i¤J¡C­Y¬O±zªº¹q¸£¤£¤ä´©ª½"
-"±µ¨Ï¥Î CDROM ¶}¾÷±Ò°Êªº¸Ü¡A§A¦³´X­Ó¤è¦¡¥i¥H¶i¦æ:\n"
-"\n"
-"* ·í±z¦w¸Ë¶}¾÷±Ò°Êµ{¦¡®É¡ADrakX µ{¦¡±N·|§ó·s¶}¾÷ºÏ°Ï(MBR) ªº¬ö¿ý¡A¨º±z´N¯à°÷"
-"±Ò°Ê±zµwºÐ¤W©Ò¦w¸Ëªº Windows¨t²Î (¦pªG±z¨t²Î¦³¦w¸Ëªº¸Ü) ©ÎªÌ¬O¡uGNU/Linux¡v¨t"
-"²Î¡C¦pªG±z»Ý­n­«·s¦w¸Ë Windows ªº¸Ü¡AMicrosoft Windows ªº¦w¸Ëµ{¦¡±N·|§ó·s¶}¾÷"
-"ºÏ°Ï¡A³o·|§â­ì¥»¦w¸Ë¦b¶}¾÷ºÏ°Ï¤WªºLinux ±Ò°Êµ{¦¡Âл\¹L¥h¡A¨º³o®É­Ô´NµLªk±Ò°Ê "
-"Linux ¨t²Î¤F¡C\n"
-"\n"
-"¦pªGµo¥Í¤F³o­Ó±¡ªp¡A±zªº Linux ¨t²Î±NµLªkª½±µ¥ÑµwºÐ±Ò°Ê¡A³o®É­Ô·N¨ýµÛ±z»Ý­n¤@"
-"±i¯à°÷±Ò°Ê Linux ¨t²Îªº¶}¾÷ºÏ¤ù¶i¦æ¶}¾÷ªº°Ê§@¡Crescue ±Ï´©ºÏ¤ù¤º¥]§t¤F³\¦h¨t"
-"²Î¤u¨ã¡A¯à°÷Åý±z¦b¶}¾÷¤§«áÀ˵ø­ì¥»¦bµwºÐªº Linux ¨t²Î¡A¨Ã¶i¦æ¬ÛÃöÀˬd¡B­×´_µ¥"
-"°Ê§@¡C\n"
-"\n"
-"·í§A¿ï¨ú³o­Ó¨BÆJ¶µ¥Ø®É¡A±z»Ý­n¤@±iºÏºÐ¤ù¥H«K©ó»s§@¤@±iresuce ±Ï´©ºÏ¤ù¡A½Ðª`·N"
-"ªº¬O¡ADrakX µ{¦¡·|¹ï³o¤@±iºÏ¤ù¶i¦æ®æ¦¡¤Æ°Ê§@¡A­ì¥»¸ê®Æ³£·|®ø¥¢¡C"
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"±µ¤U¨Ó¡A±z»Ý­n¿ï¾Ü¤@Áû·Ç³Æ¥Î¨Ó¦w¸Ë¡yMandrake-Linux¡z§@·~¨t²ÎªºµwºÐ¡C¦pªG±zªº"
-"µwºÐ¬O¥þ·s©|¥¼¨Ï¥Îªº¸Ü¡A±z»Ý­n¶i¦æ¤À³Îªº°Ê§@¥H«K©ó¤~¯à°÷¨Ï¥Î©Ò¹º¤À¥X¨Óªº¤À³Î"
-"°Ï¶i¦æ¦w¸Ë¡C¦Ó­Y¬O±zµwºÐ­ì¥»´N¤w¸g¦³¦w¸Ë¨ä¥L§@·~¨t²Îªº¸Ü¡A¥u­nµwºÐÁÙ¦³ªÅªº¨S"
-"¨Ï¥Îªº¤À³Î°Ï¡A¬Æ¦Ü¬O¤w¸g¹º¤Àµ¹¬Y§@·~¨t²Î¨Ï¥Î¡A³£ÁÙ¬O¯à°÷¤ä´©½Õ¾ã¤w¸g³Q¨Ï¥Îªº"
-"¤À³Î°Ï¡A®¿¥X¥i¥Î¤À³Î°ÏªÅ¶¡¨Ó¶i¦æ¡yMandrake-Linux¡zªº¦w¸Ë¡C\n"
-"\n"
-"­Y¬O±zµwºÐ­ì¥»´N¤w¸g¦³¸ê®Æªº¸Ü¡A«á­±ªº¤À³Î°Ê§@¡A°ò¥»¤W¬O«Ü¦MÀIªº¡A­Y¬O¾Þ§@¥¢"
-"»~±N¾É­P¤£¥i¹w´Áªº¸ê®Æ·´·lµ¥±¡ªp¡C­Y¬O±z¤£¼ô±x¤À³Îªº¤è¦¡¡A«Øij±z¥i¥H¨Ï¥ÎºëÆF"
-"¼Ò¦¡¦Û°ÊÀ°±z¹º¤À¡C¬ÛÃö°ÝÃD¡A«Øij±z¥ý¾\Ū¤â¥U¤Wªº¬ÛÃö¸ê°T¡A¥H«K©ó¸`¬Ù±zªº®É"
-"¶¡¡C\n"
-"\n"
-"­Y¬O±z·íªì¬O¿ï¾Ü¨Ï¥Î±M®a¼Ò¦¡¶i¦æ¦w¸Ëªº¸Ü¡A±N·|¶i¤JDiskDrakeµ{¦¡¡A±z·|¬Ý¨ì¤@­Ó"
-"¾ã¦X¦¡ªº¤À³Î¤¶­±¡A±z±N¯à°÷«Ü¤è«Kªº¶i¦æ¤À³Î°Ê§@¡C­Y¬O±z¤£¼ô±x¤À³Îªº¤è¦¡¡A«Øij"
-"±z¥i¥HÂI¿ïºëÆF¼Ò¦¡«ö¶sÅýµ{¦¡¦Û°ÊÀ°±z¨M©w¹º¤À¤è¦¡¡C\n"
-"\n"
-"¦pªG¸ÓµwºÐ¸Ë¸m¥ý«e¤w¸g¤À³Î¹L¤F¡A±z¥i¥Hª½±µ¿ï¾Ü¨M©w«ç»ò¨Ï¥Î³o¨Ç¤À³Î°Ï§@¬°Linux"
-"¨t²Î¦w¸Ë¨Ï¥Î¡C\n"
-"\n"
-"¦pªGÁÙ¨S¦³¤À³Î°Ï«Ø¥ß¡A±z»Ý­n«Ø¥ß¾A·íµ¹Linux¨Ï¥Îªº¤À³Î°Ï¥H«K©ó¯à°÷§âLinux¨t²Î"
-"¦w¸Ë¶i¥h¡C¥t¥~¡A¨Ì¾Ú±zµwºÐ³]©w²ÕºA¡A¥i¯à·|¦³³o¨Ç¶µ¥Ø¨Ï¥Î:\n"
-"\n"
-" ¡¯¡y¨Ï¥Î³Ñ¾lªÅ¶¡¡z¡G¸Ó¶µ¥Ø±N·|¦Û°Ê¹º¤À¥i¥Îªº³Ñ¾lªÅ¶¡¨Ó¨Ï¥Î¡C\n"
-"\n"
-" ¡¯¡y¨Ï¥Î²{¦³¤À³Î°Ï¡z¡G¸Ó¶µ¥Ø±N·|¦Û°Ê¨Ï¥Î­ì¥»¤w¸g¹º¤À¦nªº¤À³Î°Ï¡C\n"
-"\n"
-" ¡¯¡y¨Ï¥Î³Ñ¾l¥i¥ÎªºWindowsªÅ¶¡¡z¡G¦pªG±z¨t²Î¦³¦w¸Ë¡uMicrosoftWindows¡vªº¸Ü¡A"
-"¨Ã¥BWindows¤À³Î°Ï¤W¦³³Ñ¾l¥i¥ÎªºªÅ¶¡ªº¸Ü¡A¸Ó¶µ¥Ø±N¯à°÷§Q¥Î³o¨ÇªÅ¶¡¡A³z¹L½Õ¾ã¸Ó"
-"¤À³Î°Ï®¿¥X¥i¥ÎªÅ¶¡¥H«K©ó¨Ó¦w¸ËLinux¡C¤£¹Lª`·Nªº¬O¡A½Õ¾ã¸Ó¤À³Î°Ï¤j¤p¡A¦³¤@©wµ{"
-"«×ªº­·ÀI¡A«Øij§A­n¨Ï¥Î¸Ó¶µ¥Øªº¸Ü¡A¥ý³Æ¥÷±zWindows¤Wªº­«­n¸ê®Æ¥H¨¾¤£´ú¡C\n"
-"\n"
-"¦¹¥~¡A½Ðª`·N¤@¤U¡A·í¨Ï¥Î³o­Ó¶µ¥Ø«á¡AWindows¥i¥Îªº³Ñ¾lªÅ¶¡±N·|´î¤Ö¡A³o·N¨ý±z¦b"
-"WindowsÀô¹Ò¤U¥i¥ÎªºªÅ¶¡·|´î¤Ö¡C\n"
-"\n"
-" ¡¯¡y§R°£¾ã­ÓºÏºÐ¡z¡G¦pªG±z­n²MªÅ¬Y­ÓµwºÐ¤W©Ò¦³ªº¤À³Î°Ï¡A±z¥i¥H¿ï¾Ü¨Ï¥Î³o­Ó¶µ"
-"¥Ø¡C¦ý¬O¤p¤ß¨Ï¥Î¡A¦]¬°§R°£«á­ì¥»µwºÐ¬ÛÃö¤À³Î°Ï¥H¤ÎÀx¦sªº¸ê®Æ³£·|®ø¥¢¡C\n"
-"\n"
-"¡¯¡y±M®a¼Ò¦¡¡z¡G³o­Ó¶µ¥Ø¯à°÷Åý±z¤â°Ê¦Û¦æ¨M©w¹º¤À¤è¦¡¡C¤£¹L½Ð¤p¤ß¨Ï¥Î¡A¦]¬°³o"
-"¬Û·í¦n¥Î¡A¤]·N¨ýµÛ­Y¬O¾Þ§@¤£·í¥¢»~¥i¯à·|·´·l±zªºµwºÐ¸ê®Æ¡A¦]¦¹\n"
-"½Ð¤p¤ß¨Ï¥Î¡C"
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"·í¾ã­Ó¦w¸Ë¨BÆJ¨ì³o¸Ìªº®É­Ô¡A¨º´N¥Nªí±z¤w¸g§¹¦¨¤F¡yGNU/Linux¡z¨t²Îªº¦w¸Ë¨BÆJ¡A"
-"±z¥i¥HÂI¿ï¡y½T©w¡z­«·s±Ò°Ê¹q¸£¡C\n"
-"\n"
-"¡¯¡y¶i¶¥¡z«ö¶s¶µ¥Ø(±M®a¼Ò¦¡¤~·|¥X²{)¡A±N·|Åã¥Ü¨â­Ó¥i¥Îªº¶µ¥ØÅý±z¿ï¾Ü:\n"
-"\n"
-" ¡¯ ¡y²£¥Í¦Û°Ê¦w¸ËºÏ¤ù¡z¡G³o±N·|«Ø¥ß¤@±i¯à°÷¦Û°Ê¦w¸ËªººÏ¤ù¡A\n"
-"¾ã­Ó¦Û°Ê¤Æ¦w¸Ëªº¨BÆJ¡A±N·|¨Ì·Ó±zªº¾Þ§@¹Lµ{¨Ó¶i¦æ¡C\n"
-"\n"
-"  ½Ðª`·N³oÃä¡A·í±zÂI¿ï³o­Ó¶µ¥Ø«á¡A¥i¥H¬Ý¨ìÁÙ¦³¨â­Ó°Ñ¼Æ¶µ¥Ø¥i¨Ñ¿ï¾Ü:\n"
-"\n"
-"   ¡¯¡y­«¼½¡z¡G³o¬O¥b¦Û°Ê¦w¸Ë¤è¦¡¡AºÏºÐ¤À³Î¶µ¥Ø±N·|ºû«ù¤â°Ê¤è¦¡¾Þ§@¡C\n"
-"\n"
-"   ¡¯¡y¦Û°Ê¤Æ¡z¡G³o¬O¥þ¦Û°Êªº¦w¸Ë¤è¦¡¡A¥]§tºÏºÐµ¥¦MÀI°Ê§@³£·|¦Û°Ê³B²z¡C\n"
-"\n"
-"  ³o¸Ìªº¥\¯à¡A¹ï©ó±z»Ý­n¤j¶q¦w¸Ë«Ü¦hLinux¨t²Î¦b¤@¤j¸s¾÷¾¹¤Wªº¸Ü¨Ó»¡³o¬O¬Û·í¦³"
-"À°§Uªº¡CÃö©ó³o¸Ì¬ÛÃö¶i¤@¨B¸ê®Æ¡A±z¥i¥H°Ñ¦Òºô­¶¤W¦Û°Ê¦w¸Ë³¹¸`ªº¬ÛÃö»¡©ú¡C\n"
-"\n"
-" ¡¯ ¡yÀx¦s®M¥ó¿ï¾Ü¡z(*)¡G³o­Ó¶µ¥Ø´N¬O±N±z¥ý«e¾Þ§@¿ï¾Ü©Ò­n¦w¸Ëªº®M¥ó²M³æ¶µ¥Ø³£"
-"¬ö¿ý°_¨Ó¦s©ñ¨ìºÏ¤ù¤º¡A¥H«K©ó±z¥i¥H¦b¨Æ«áÁٻݭn¦w¸ËMandrake Linux ®É¡A¥i¥Hª½±µ"
-"¸ü¤J¥ý«e©Ò¿ï¾Ü­n¦w¸Ëªº®M¥ó²M³æ¡A¤£»Ý­n¦A¤@¦¸­«·s¿ï¾Ü¤F¡C\n"
-"­Y¬O±z­n¨Ï¥Î³o±iºÏ¤ù¬ö¿ýªº®M¥ó²M³æ¶i¦æ¦w¸Ëªº¸Ü¡A¶}¾÷®É¥X²{¡yMandrake Logo¡z"
-"®É¡A«ö¤U F1 «ö¥ó¡AµM«á¿é¤J¡ulinux defcfg=\"floppy\"¡v §Y¥i¡C\n"
-"\n"
-"(¡¯) ­n¨Ï¥Î¡yÀx¦s®M¥ó¿ï¾Ü¡z¥\¯à¡A±z»Ý­n¤@±i¤w¸g¨Ï¥ÎDOS/Windowsµ¥®æ¦¡¤Æ¦nªº "
-"FAT ®æ¦¡ºÏ¤ù¥H«K©ó¨Ï¥Î¡C(GNU/Linux Àô¹Ò¤U¡A¥i¥H¥Î mformat a: »s§@¤@±iªÅ¥ÕºÏ"
-"¤ù¡C)"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"¥ô¦ó·s«Ø¥ßªº¤À³Î°Ï³£¥²¶·®æ¦¡¤Æ«á¤~¯à°÷¨Ó¨Ï¥Î¡C(®æ¦¡¤Æ¥]§t«Ø¥ßÀɮרt²Î)¡C\n"
-"\n"
-"·íµM¡A³o®É­Ô±z¤]¥i¥H¿ï¾Ü®æ¦¡¤Æ³o¨Ç¤w¸g¦s¦bªº¤À³Î°Ï¡A¨º­ì¥»¸Ì­±ªº¸ê®Æ³£±N·|®ø"
-"¥¢¡C­Y¬O­n¨Ï¥Î¦¹¶µ¥Ø¡A½Ð¿ï¾Ü­n®æ¦¡¤Æªº¤À³Î°Ï¡C½Ðª`·N¤@¤U¡A¨Ã¤£¬O©Ò¦³¥ý«e¤w¸g"
-"¦s¦bªº¤À³Î°Ï³£±o­«·s®æ¦¡¤Æ¡A³q±`±z¤]³\·|±N¨t²Î¹º¤À¥X³\¦h¤À³Î°Ï·í§@¤£¦Pªº¥Î"
-"³~¡A¤ñ¤è§â ¡u\\¡v¡B¡uusr¡v¡B¡u/var¡v»P¡u/home¡v¿W¥ß¹º¤À¤@­Ó¤À³Î°Ï¨Ï¥Î¡C¨º³o­Ó"
-"±¡ªp¡A¨Ï¥ÎªÌ¡u/home¡v¤À³Î°Ï¤W­±¦s©ñ³\¦hªº¸ê®Æ¡A¨º±z´N¿ï¾Ü¤£»Ý­n­«·s®æ¦¡¤Æ¡C\n"
-"\n"
-"·í±z­n¿ï¾Ü­n®æ¦¡¤Æªº¤À³Î°Ï®É¡A½Ð¤p¤ß¿ï¾Ü¡A¦]¬°¿ï¿ùªº¸Ü¡A±zªº¸ê®Æ±N·|¤@¥hµL"
-"¦^¡A¦A¤]µLªk±Ï¦^¨Ó¤F¡A¦]¦¹±z­n¯S§O¤p¤ß¿ï¾Ü¡C\n"
-"\n"
-"·í±z¿ï¾Ü¦n«á¡A½ÐÂI¿ï¡y½T©w¡z¡A¦w¸Ëµ{¦¡·|¶i¦æ®æ¦¡¤Æªº°Ê§@¡C\n"
-"\n"
-"­Y¬O±zÂI¿ï¤F¡y¨ú®ø¡z¡A¨º±N·|·|¨ì¥ý«eªº¾Þ§@¨BÆJ¡AÄ~Äò¿ï¾Ü­n¦w¸Ëªº¤À³Î°Ï¡A°²³]"
-"±zÂI¿ï¤F¡y¶i¶¥¡zªº¶µ¥Ø«á¡A±N·|´£¨Ñ¬O§_­n¶i¦æÃa­y±½´y°Ê§@ªº¿ï¶µ¡C"
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"¡uMandrake-Linux¡v¤w¸g¶}©l¶i¦æ¦w¸Ë¤F¡C§¹¦¨¾ã­Ó¦w¸Ëªº®É¶¡¡A±N·|¨Ì·Ó±z¿ï¾Ü¦w¸Ë"
-"®M¥ó¼Æ¶q¦h¹è¡A¥H¤Î¹q¸£ªº°t³Æ¦Ó¦³©Ò¤£¦P¡C\n"
-"\n"
-"®M¥ó¦w¸Ë¤¤¡A½Ðµy«á¡D¡D¡D"
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"¦b¶i¦æ¤U­±°Ê§@«e¡A±z¤w¸g¥J²Óªº¾\Ū¤U­±¬ÛÃöª©Åv±ø´Ú¡C³o¥]§t¾ã­Ó¡uMandrake-"
-"Linux-Distriubtion¡vª©Åv¤º®e¡A¦Ó­Y¬O±z¤£¦P·N¤º¤å©Ò´£¤Îªº¬ÛÃöª©Åv±ø´Ú«Å§i¡A±z"
-"¥i¥HÂI¿ï¡y©Úµ´¡z«ö¶s©ñ±ó¡A¦w¸Ëµ{¦¡±N·|¥ß§Yµ²§ô¡C­Y¬O±z±µ¨üªº¸Ü¡A¥i¥HÂI¿ï¡y±µ"
-"¨ü¡z«ö¶s¥H«K©óÄ~Äò¶i¦æ¤U­±ªº¦w¸Ë¡C "
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"±µ¤U¨Ó¡A·Ç³Æ¿ï¾Ü¨t²Î¦w¥þµ¥¯Åªº¶µ¥Ø¡C¤@¯ë¨Ó»¡¡A­Y¬O¾÷¾¹Àô¹Ò¶V¼ÉÅS©óÀô¹Ò¤U¡A¸Ì"
-"­±©ÒÀx¦sªº¸ê®Æ´N¤ñ¸û¦³¦w¥þ©Êªº°ÝÃD¦Ò¶q¡C¬Û¹ï¨Ó»¡¡A¨t²Î©Ò¨Ï¥Îªº¦w¸Ëµ¥¯Å¤]´NÀ³"
-"¸Ó¶V°ª¡A¥H«K©ó¸ê®Æ«O¦s·|¤ñ¸û¦w¥þ¡C½Ð¾\Ū°Ñ¦Ò¤â¥U¤ºÃö©ó MSEC ³¹¸`ªº¤º®e¡A¥H«K"
-"©ó¨ú±o§ó¦h³o¤è­±ªº¬ÛÃö¸ê°T¡C\n"
-"­Y¬O±z¤£ª¾¹D¸Ó¦p¦ó¿ï¾Üªº¸Ü¡A¨Ï¥Î¹w³]­È´N¥i¥H¤F¡C"
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-"    * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"¦b³o­Ó¶¥¬q¡A±z»Ý­n¿ï¾Ü­n¥Î¨Ó¦w¸Ë¡yMandrake-Linux¡z¨t²Îªº¤À³Î°Ï¡C±z¥i¥H­«·s¹º"
-"¤À·sªº¤À³Î°Ï¨Ó¨Ï¥Î¡A©ÎªÌ¬O¨Ï¥Î­ì¥»¤w¸g¹º¤À¦nªº´N¦³¤À³Î°Ï¡C\n"
-"\n"
-"­n«Ø¥ß·s¤À³Î°Ï¡A±z»Ý­n¥ý¿ï¾Ü¤@¥xµwºÐ¶i¦æ¾Þ§@¡C¤ñ¤è¿ï¨ú¡uhda¡v¡B¡uhdb¡v³oÃþ "
-"IDE µwºÐ¸Ë¸m¡A©ÎªÌ¬O¡usda¡v.. µ¥ SCSI µwºÐ¸Ë¸m¡C\n"
-"\n"
-"¶i¦æ¤À³Îªº°Ê§@¡A¦b±z¿ï¦n¤@¥xµwºÐ¸Ë¸m«á¡A±z¦³³o¨Ç¶µ¥Ø¥i¥H¨Ï¥Î:\n"
-"\n"
-" *¡y²M°£¥þ³¡¡z¡G³o­Ó¶µ¥Ø±N·|§â©Ò¿ï¨úªºµwºÐ¤W©Ò¦³¤À³Î°Ï³£²M°£±¼¡C\n"
-"\n"
-" *¡y¦Û°Ê°t¸m¡z¡G³o­Ó¶µ¥Ø±N·|¦Û°Ê§ä´M©Ò¿ï¨úªºµwºÐ³Ñ¾l¥i¥ÎªºªÅ¶¡¡A¦Û°Ê¹º¤À¥X"
-"¡uExt2¡v»P¡uswap¡v¤À³Î°Ï¶i¦æ¦w¸Ë¨Ï¥Î¡C\n"
-"\n"
-" *¡y§ó¦h¡z¡G´£¨Ñ¶i¶¥ªº¿ï¶µ³]©w:\n"
-"\n"
-" *¡yÀx¦s¦ÜºÏ¤ù¡z¡G§â¥Ø«e¤À³Îªí¹º¤Àª¬ºAÀx¦s¨ìºÏ¤ù¤º¡A¥H«K©ó¦b¬Y¨ÇÀô¹Ò¤U¥i¥H¥Î"
-"¨Ó«æ±Ï´_­ì¡C«Øij§A­Y¬O¤£¼ô±xºÏºÐ¹º¤À¡A¥i¥H¦h§Q¥Î³o­Ó¶µ¥Ø¡C\n"
-"\n"
-" *¡y¸ü¤J³nºÐ¤¤ªº³]©w­È¡z¡G³o­Ó¶µ¥Ø¯à°÷¦^¦s¥ý«eÀx¦s¦bºÏ¤ùªºµwºÐªº¤À³Îªí¹º¤Àª¬"
-"ºA\n"
-"\n"
-" *¡y±Ï´©¤À³Î°Ï¡z¡G¦pªG±zªº¤À³Î°Ï·´·l¤F¡A¤]³\±z¥i¥H¨Ï¥Î³o­Ó¶µ¥Ø¶i¦æ«æ±Ïªº°Ê"
-"§@¡C¤£¹L½Ð¤p¤ß¨Ï¥Î³o­Ó¶µ¥Ø¡A¥HÁקK²£¥Í§ó¦hªº§ó¦h¿ù»~¡C\n"
-"\n"
-" *¡y´_­ì¤À³Î°Ï¡z¡G¨ú®ø­è­èªººÏºÐ¤À³Îªº¹º¤À¾Þ§@ªºÅܧó¡C\n"
-"\n"
-" *¡y­«Åª¤À³Î°Ï¡z¡G­n©ñ±ó­è­è¹ïºÏºÐ¥ô¦ó¹º¤À°Ê§@¡A¨Ã¦^¨ì³Ì­ì¥»ª¬ºA¡AÅýµ{¦¡­«·s"
-"Ū¨ú±z³Ì­ì¥»ªºª¬ºA¡C\n"
-"\n"
-" *¡y¥i²¾°£¸Ë¸m¦Û°Ê±¾¸ü¡z¡G­Y¬O±z§Æ±æ¯à°÷¦Û°Êªº±¾¤JºÏºÐ¤ù»P¥úºÐ¤ùªº¸Ü¡A½Ð¿ï¨ú"
-"¸Ó¶µ¥Ø¡C\n"
-"\n"
-" *¡yºëÆF¡z¡G¦pªG±z§Æ±æ¥Ñµ{¦¡À°±z¦Û°Ê¤À°tºÏºÐ¤À³Îªº¸Ü¡A¥i¥H¨Ï¥Î¸Ó¶µ¥Ø¡C¤@¯ë«Ø"
-"ijµ¹ªì¾ÇªÌ¨Ó¨Ï¥Î¡C\n"
-"\n"
-" *¡y¤Á´«¦Ü¤@¯ë/±M®a¼Ò¦¡¡z¡G´£¨Ñ§ó¦hÃB¥~ªº¤À³Î°Ï¸ê°T¶µ¥Ø (Ãþ«¬¡B¿ï¶µ¡B®æ¦¡¤Æ) "
-"杭C\n"
-"\n"
-" *¡y§¹¦¨¡z¡G·í±z§¹¦¨ºÏºÐ¹º¤À°Ê§@®É¡A½Ð¿ï¾Ü³o­Ó¶µ¥Ø¡A¥H«K©ó§â¥Ø«e¤À³Îªºµ²ªG¼g"
-"¤J¨ìµwºÐ§ó·s¡C\n"
-"\n"
-"½Ðª`·N¡G³oÃä±z¥i¥H¦h§Q¥Î [Tab] »P [Up/Down] Áä¨Ó©¹ªðºÏºÐ¤À³Îµe­±¾Þ§@¡C\n"
-"\n"
-"·í¿ï¨ú¦n¤@­Ó¤À³Î°Ï®É¡A±z¥i¥H¨Ï¥Î:\n"
-"\n"
-" * Ctrl-c¡G«Ø¥ß¤@­Ó·s¤À³Î°Ï (·íªÅªº¤À³Î°Ï³Q¿ï¨ú®É¨Ï¥Î);\n"
-"\n"
-" * Ctrl-d¡G§R°£¸Ó¤À³Î°Ï;\n"
-"\n"
-" * Ctrl-m¡G³]©w¸Ó¤À³Î°Ïªº±¾¸üÂI¡C\n"
-"\n"
-"¦pªG±z¬O¨Ï¥Î PowerPC ªº¾÷¾¹¡A±z»Ý­n«Øij¤@­Ó¤j¬ù 1MB ªº HFS¤À³Î°Ï§@¬°yaboot¶}"
-"¾÷µ{¦¡¨Ï¥Î¡A¥H«K©ó¯à°÷Åý yaboot ¶}¾÷µ{¦¡¯à°÷±Ò°Ê Linux ¨t²Î¡C·íµM¡A¤@¯ë§Ú­Ì«Ø"
-"ij¡A±z¥i¥HÅý³o¶ô«O¯dªº¤À³Î°Ï¦³¤j¤@ÂIªºªÅ¶¡¡A¤ñ¤è«O¯d¤@¶ô¡u20M¡vªº¤À³Î°Ï¡A¨º±z"
-"´N¯à°÷¦b¸Ó¤À³Î°Ï¤W©ñ¸m³\¦h¥÷ªº¶}¾÷®Ö¤ß¬ÛÃöÀɮרӨϥΡC"
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"¥Ø«e°»´ú¨ì±zªºµwºÐ¤W¦³¦h­Ó Windows ¤À³Î°Ï¡A½Ð¿ï¾Ü±z§Æ±æ­nÁY¤pWindowsªº¤À³Î"
-"°Ï¡A¥H«K©ó§âªÅ¶¡®¿¥X¨Ó¦w¸Ë¡uMandrake Linux¡v§@·~¨t²Î¡C\n"
-"\n"
-"¨C­Ó¤À³Î°Ï³£¦C¥X¤F¹³¬O:¡yLinux ¦WºÙ¡z,¡yWindows ¦WºÙ¡z,¡y®e¶q¡z¡C\n"
-"\n"
-"¡yLinux ¦WºÙ¡z¬O¦³µ²ºc©Êªº:¡yµwºÐ«¬ºA¡z,¡yµwºÐ½s¸¹¡z,¡y¤À³Î°Ï½s¸¹¡z(¤ñ¤è¹³"
-"¬O: hda )¡C\n"
-"\n"
-"¡yµwºÐ«¬ºA¡z´N¬O¡A­Y±z¨Ï¥Îªº¬O IDE µwºÐ¡A·|Åã¥Ü¡uhd¡v, ­Y¬OSCSIµwºÐªº¸Ü¡A´N¬O"
-"Åã¥Ü¡usd¡v¡C\n"
-"\n"
-"¡yµwºÐ½s¸¹¡z´N¬O¦b¡uhd¡v©ÎªÌ¬O¡usd¡v«á­±ªº¦r¥À¡C¥H IDE µwºÐ¸Ë¸m¨Ó»¡¨ä·N¸q"
-"¬°:\n"
-"\n"
-" ¡¯¡ua¡v³o¬O«ü¡uprimary IDE controller ¤W²Ä¤@¥x (master) µwºÐ¡v¡A\n"
-"\n"
-" ¡¯¡ub¡v³o¬O«ü¡uprimmary IDE controller ¤W²Ä¤G¥x (slave) µwºÐ¡v¡A\n"
-"\n"
-" ¡¯¡uc¡v³o¬O«ü¡usecondary IDE controller ¤W²Ä¤@¥x (master) µwºÐ¡v¡A\n"
-"\n"
-" ¡¯¡ud¡v³o¬O«ü¡usecondary IDE controller ¤W²Ä¤G¥x (slave) µwºÐ¡v¡C\n"
-"\n"
-"¥H SCSI µwºÐ¨Ó»¡¡A¡ua¡v´N¬O«ü¡uSCSI IDE ½s¸¹³Ì¤pªº¨º¤@¥x¡v, ¡ub¡v´N¬O«ü"
-"¡uSCSI IDE¡v½s¸¹¬°¤Gªº¨º¤@¥xµwºÐ¡v¡AµM«á¨Ì¦¹Ãþ±À¤U¥h.....\n"
-"\n"
-"¡uWindows ¦WºÙ¡v´N¬O¦b Windows ¤UªººÏºÐ¾÷¥N¸¹¦WºÙ¡A¤ñ¤è¹³¬O¡uC:\\¡v¡C"
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "½Ðµy«á¡A³o­Ó¨BÆJ¯à°÷»Ý­nªá¶O¤@¨Ç®É¶¡¤~¯à°÷°õ¦æ§¹²¦¡C"
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"³o¸Ì¡A±z»Ý­n¨M©w¤@­Ó¦w¸Ëªº¼Ò¦¡¡A¤ñ¤è§A§Æ±æ¨Ï¥Î¹w³]¡y«Øij­È¡z©ÎªÌ¬O¨Ï¥Î¤ñ¸û¦³"
-"¦Û¥DÅv¡y±M®a¼Ò¦¡¡z¼Ò¦¡¶i¦æ¦w¸Ë¡C·íµM¡A±z¤]¥i¥H¦w¸Ë¤@®M¥þ·sªº¨t²Î¡A©ÎªÌ¬O±N¥Ø"
-"«eªº¡yMandrake Linux¡z¨t²Î§ó·s¡G\n"
-"\n"
-" ¡¯¡u¦w¸Ë¡v: ·í±z¥´ºâ¦w¸Ë¤@®M¥þ·sªº¡yMandrake Linux¡z¨t²Îªº¸Ü¡A¥i¥H¿ï¾Ü³o­Ó¶µ"
-"¥Ø¡C\n"
-"\n"
-" ¡¯ ¡u¤É¯Å¡v: ·í±zªºµwºÐ¤w¸g¦³¦w¸Ë¹Lª©¥»ªº Mandrake Linux¨t²Îªº¸Ü¡A±z¥i¥H¿ï"
-"¾Ü³o­Ó¶µ¥Ø¡C\n"
-"\n"
-" ¡¯¡u¶È§ó·s®M¥ó¡v: ¥u·|§ó·s¬ÛÃöµ{¦¡®M¥ó¡A¤£·|²§°Ê¨t²Î­ì¥»³]©w¡C\n"
-"\n"
-"¨Ì·Ó±z¹ï©ó¡uGNU/Linux¡vªº»{ÃѼô±xµ{«×¨Ó¬Ý¡A±z¥i¥H¨Ï¥Î¤U­±ªº¼Ò¦¡¨Ó¶i¦æ²Îªº¦w¸Ë"
-"©ÎªÌ¬O¤É¯Åªº¨BÆJ:\n"
-"\n"
-" ¡¯ «Øij­È : ¦pªG±z¨S¦w¸Ë¹L¡yGNU/Linux¡z§@·~¨t²Î¡A½Ð¿ï¾Ü³o­Ó¶µ¥Ø¡A¾ã­Ó¦w¸Ë¹L"
-"µ{±N·|¬Û·í»´ÃP²³æ¡AµM«á¤]¥u·|°Ý±z´X­Ó°ÝÃD\n"
-"´N¥i¥H§â¾ã­Ó¨t²Î¦w¸Ë§´·í¡C\n"
-"\n"
-" ¡¯ ¦Û­q: ¦pªG±z¥»¨­¦³±µÄ²¹L¡yLinux¡z¨t²Î¡A¬Æ¦Ü¹ï³o­Ó¨t²Î¬Û·í¼ô±xªº¸Ü¡A±z¥i¥H"
-"¿ï¾Ü³o­Ó¦w¸Ë¼Ò¦¡¡C·í±z¨Ï¥Î±M®a¼Ò¦¡¦w¸Ë®É¡A¦w¸Ëµ{¦¡·|Åý±z§¹¥þªº¾Þ±±¾ã­Ó¨t²Î¦w"
-"¸Ë¨BÆJ¡C¨Ï¥Î¸Ó¼Ò¦¡«á¡A¦w¸Ë¹Lµ{³°Äò¥i¯à·|¥X²{«Ü¦h°ÝÃD­n±z¥h¦^µª¡A­Y¬O±z¤£¬O«Ü"
-"¯à°÷¾r¶¿³o¨Ç¸ß°Ýªº¸Ü¡A«Øij±z°£«D±zª¾¹D±z©Ò¿ï¾Üªº¶µ¥Ø¥Nªí·N¸q¬°¦ó¡A­n¤£µM½Ð¨Ï"
-"¥Î¹w³]­È¦Ó¤£­n¦A¥h¿ï¨ú¬ÛÃö³]©w¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"¥¿±`±¡ªp¨Ó»¡¡A¡uDrakX¡v¯à°÷¥¿½Tªº¨Ì·Ó±z¿ï¾Üªº»y¨t¡A¦Û°Ê°»´ú±z¨t²ÎªºÁä½L,©Ò¥H"
-"±z¤£·|·|¬Ý¨ì³o­Ó¨BÆJªº³]©w¡C¦ý¬O¡A­Y¬O±z¦³¯S®íªºÀô¹Ò»Ý¨D¡A³oÃä´N¯à°÷Åý±z¿ï"
-"¾Ü¡C\n"
-"\n"
-"½ÐÂI¿ï¡u§ó¦h¡v«ö¶s¡A¥H«K©ó¿ï¾Ü±z©Ò»Ý­n¨Ï¥ÎªºÁä½L¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"½Ð¿ï¨ú±z¦w¸Ë¹Lµ{©Ò­n¨Ï¥Îªº»y¨t¡CÂI¿ï¡y¶i¶¥¡z«ö¶s¥i¥HÅý±z\n"
-"¿ï¨ú¨ä¥L»y¨t¡A¸Ó¿ï¨úªº»y¨t±N·|¤@¦P¦w¸Ë¨ì¨t²Î¤º¡C\n"
-"·í§A¿ï¾Ü¦w¸Ë©Ò»Ý­nªº»y¨t¶µ¥Ø«á¡A¨t²Î±N·|¦w¸Ë¤Wµ¹¨t²Î¤å¥ó¡B\n"
-"À³¥Îµ{¦¡©Ò¨Ï¥Îªº¬ÛÃö»y¨t¸ê®Æ¡A³o·N¨ýµÛ·í±z¤Á´«¨ì¸Ó»y¨tÀô¹Ò®É¡A\n"
-"´N¯à°÷¨Ï¥Î¸Ó»y¨t©w¸qªºÀô¹Ò¡BÅã¥Ü¡B¿é¤J¶i¦æ¤@¯ë¨t²Î¾Þ§@¨Ï¥Î¡C\n"
-"\n"
-"·í±z¿ï¾Ü¦n¤F¤§«á¡A½ÐÂI¿ï¡y½T©w¡z«ö¶sÄ~Äò¡C"
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"¹w³]ªº±¡ªp¡A¡yDrakX¡zµ{¦¡·|¹w³]±z¨t²Î¥u¦³¨â­Ó«ö¶s¦¡ªº·Æ¹«¡A¨Ã¦Û°Ê¿ï¾Ü¼ÒÀÀ¤TÁä"
-"ªº¥\¯à¡C¦¹¥~¡A¡yDrakX¡z¤]¯à°÷«Ü¦Û°Ê¤Æªº°»´ú¨ì±z¨t²Î¨Ï¥Îªº·Æ¹«¬OÄÝ©ó§Ç¦C¡B"
-"¡uPS/2¡v©ÎªÌ¬O¡uUSB¡v³W®æªº·Æ¹«Ãþ«¬¡C\n"
-"\n"
-"¦pªG¹w³]ªº¶µ¥Ø¤£¬O§A©Ò¹w´Áªº¡A±z¥i¥H¥Ñ¤U­±²M³æ¦Cªí¿ï¾Ü±z©Ò­n¨Ï¥Îªº·Æ¹«Ãþ"
-"«¬¡C\n"
-"\n"
-"·í§A¿ï¾Ü«D¦w¸Ëµ{¦¡¹w³]ªº·Æ¹«¶µ¥Ø®É¡Aµ¥µ¥·|¦³¤@­Ó·Æ¹«´ú¸Õªºµe­±¡A±z¥i¥H¦b¸Ó³B"
-"´ú¸Õ·Æ¹«¬O§_¥i¥H¥¿±`¨Ï¥Î¡A¥H«K©ó½T»{±z¿ï¾Üªº¶µ¥Ø¥¿½TµL»~¡C­Y¬O±z¿ï¾Üªº¶µ¥ØµL"
-"ªk¥¿±`¤u§@¡A¨Ï¥ÎÁä½L«ö¤UªÅ¥ÕÁä©ÎªÌ¬O¡uEnterÁä¡v¡AµM«á¿ï¾Ü¡y¨ú®ø¡z¦^¨ì·Æ¹«¿ï¾Ü"
-"¶µ¥Ø§Y¥i¡C"
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"½Ð¿ï¾Ü¥¿½Tªº³sµ²°ð¦WºÙ¡C¤ñ¤è¡AMS Windows ©ÒºÙ©Iªº¡uCOM1¡v¡A\n"
-"¦b GNU/Linux Àô¹Ò¬OºÙ©I¬°¡uttyS0¡v¡C"
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"³oÃä¬OÃö©ó GNU/Linux ¨t²Î¦w¥þ³]©w: §A»Ý­n³]©w¨t²ÎºÞ²z­ûrootªº±K½X¡Croot ¬O¨t"
-"²ÎªººÞ²zªÌ¡A¦³³Ì°ªªº¨t²ÎÅv­­¡A¨ã³Æ¦¹Åv­­ªº¤H¡A¯à°÷§¹¥þªº±±ºÞ³]©w¨t²Îªº©Ò¦³¹B"
-"§@¡C¤ñ¤è¹³¬O«Ø¥ß±b¸¹¡A§ó·s¨t²Î®M¥ó¡AºÞ²z¾ã­ÓÀɮרt²Îµ¥µ¥¡C\n"
-"«Øij±z³]©w root ¨t²ÎºÞ²zªÌªº±K½X®É¡A¸Ó±K½X¤£­n¹L©ó²³æ¡A¥H§K®e©ö¾D¨ì¥L¤H±ÀºV"
-"¥X¨Ó«á´c·N¯}Ãa±zªº¨t²Î¡C³oÃä³]©w±K½X®É¡A­Y¬O±K½X¹L©ó²³æ©ÎªÌ¬O¦³³W«h©Êªº¸Ü¡A"
-"µ{¦¡±N·|ĵ§i±z»Ý­n­«·s¦A¿é¤J¤@¹M¡C\n"
-"\n"
-"±K½X¥i¥H¥]§t¤@¯ë¥i¨£ªº­^¤å¦r¥À¦r¤¸¡A¥]§t­^¤å¦r¥À¦r¤¸¡BªÅ¥Õ¡B¼Æ¦rµ¥¡A¥i¥]§t¤j"
-"¤p¼g²V¦Xªº¿é¤J¡C¦¹¥~¡A±K½Xªø«×«Øij¦Ü¤Ö¦³8­Ó¦r¤¸©ÎªÌ§ó¦h¡C¦A¨Ó´N¬O¤£­n§â¨t²ÎºÞ"
-"²z­ûªº±K½X¼g¦b¯È¤W©ÎªÌ¬O¬ö¿ý©ó¹q¸£¤W¡A¦]¬°¥i¯à¦³³QÅѨú¡B°½¿sµ¥ªº±¡ªpµo¥Í¡C\n"
-"\n"
-"·íµM¡A±K½X¤]¤£¥Î¨úªº¤Óªø¡A¦]¬°¤Óªø¥i¯à®e©ö§Ñ°O¡A¬Æ¦Ü¬O¿é¤J®É®e©ö¦³¿ù»~¡C\n"
-"\n"
-"±z¦b¿é¤J±K½X®É¡A¿Ã¹õ¤W¤£·|Åã¥Ü¥X§A¹ê»ÚºV¤Jªº¤º®e¡C¥t¥~´N¬O±z»Ý­n¿é¤J¨â¦¸¥H«K"
-"©ó½T©w©Ò¿é¤Jªº±K½X¨S¦³¥´¿ù¡C\n"
-"\n"
-"¦b±M®a¼Ò¦¡¦w¸ËªºÀô¹Ò¡A±z¤U­±ÁÙ¥i¥H¿ï¾Ü¬O§_­n¨Ï¥Î NIS¡BLDAPµ¥ªº¦øªA¾¹³sµ²§@¬°"
-"±b¸¹»{ÃÒªº¤è¦¡¡C\n"
-"\n"
-"Ãö©ó LDAP¡BNIS »{ÃÒªº¤è¦¡¡A­Y¬O§Aª¾¹D±z©Ò¦bºô¸ô¦³¨Ï¥Î³oÃþ»{ÃҤ覡ªº¸Ü¡A±z¤]³\"
-"n\"»Ý­n¦Vºô¸ôºÞ²zªÌ¸ß°Ý¬ÛÃö¸ê°T¥H«K©ó¯à°÷³]©w¨Ï¥Î¡C\n"
-"\n"
-"­Y¬O»{ÃҤ覡´N¬O³æ¯Â¸Ó¹q¸£¤Wªº±b¸¹¤è¦¡¡A¿ï¾Ü¨Ï¥Î¥»¦aºÝ±K½XÀɮ׶µ¥Ø§Y¥i¡C"
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO »P GRUB ³£¬O GNU/Linux ªº¶}¾÷±Ò°Êµ{¦¡¡C¤@¯ë¨Ó»¡¡A³o­Ó³]©w¶¥¬q¬O¥þ¦Û°Ê"
-"ªº¡C¨Æ¹ê¤W¡ADrakX ·|¤ÀªR¨t²ÎºÏºÐ¶}¾÷ºÏ°Ï¤W­±ªº¤º®e¡A¨Ó¨M©w¤@¨Ç¨Æ±¡:\n"
-"\n"
-" * ­Y¬O¦³§ä¨ì Windows ªº¶}¾÷ºÏ°Ï¡Aµ{¦¡±N·|¨Ï¥ÎGRUB/LILOµ{¦¡¥[¥H¨ú¥N¡A¦p¦¹¡A±z"
-"´N¥i¥H¨Ï¥Î GRUB ©ÎªÌ¬O LILO ¶}¾÷µ{¦¡¨Ó±Ò°Ê Linux ¨t²Î¡A¬Æ¦Ü¬O¥i¥H±Ò°Ê¥t¥~¤@­Ó"
-"§@·~¨t²Î(¤ñ¤è¹³¬O Windows µ¥)¡C\n"
-"\n"
-" * ¦pªG¦b¶}¾÷ºÏ°Ï¤W¤w¸g§ä¨ì¤F GRUB ©ÎªÌ¬O LILO ¶}¾÷µ{¦¡¡Aµ{¦¡±N·|¨Ï¥Î·sªº³]©w"
-"­ÈÂл\¡A¦pªG¦w¸Ëµ{¦¡¦³µLªk¦Û°Ê³B²zªº±¡ªp¡A¥¦·|Åã¥Ü¥X¤U­±ªº¿ï¶µ¡C\n"
-"\n"
-" * \"­n¨Ï¥Î¨º­Ó¶}¾÷ºÞ²zµ{¦¡\": ±z¦³¤T¦U¶µ¥Ø¥i¥H¿ï¾Ü:\n"
-"\n"
-"    * ¡uGRUB¡v: ¦pªG±z¤ñ¸û³ßÅw¨Ï¥Î GRUB (³o¬O¤å¦r¼Ò¦¡ªº¶}¾÷¿ï³æ)¡C\n"
-"\n"
-"    * ¡u¹Ï§Î¿ï³æ LILO ¤¶­±¡v: ¦pªG±z§Æ±æ¨Ï¥Î¹Ï§Î¤Æªº LILO ¶}¾÷¿ï³æ¡C\n"
-"\n"
-"    * ¡u¤å¦r¿ï³æ LILO ¤¶­±¡v: ¦pªG±z§Æ±æ¨Ï¥Î¤å¦r¼Ò¦¡ªº LILO ¶}¾÷¿ï³æ¡C\n"
-"\n"
-" * \"¶}¾÷¸Ë¸m\" ³o­Ó¦a¤è¡A¤@¯ë¨Ó»¡¥i¥H¤£¥Î§ó§ï¡A¤ñ¤è¹³¬O¤@¯ë\n"
-"¦w¸Ë¦b²Ä¤@¥xµwºÐ (/dev/hda) ¤W¡A±z¤]¥i¥HÅܧó¿ï¾Ü¡A¤ñ¤è¹³¬O\n"
-"¦w¸Ë¨ì²Ä¤G¥xµwºÐ (/dev/hdb)¡A¬Æ¦Ü¬O¦w¸Ë¨ì³nºÐ (/dev/fd0)\n"
-"³£¬O¥i¦æªº¡C\n"
-"\n"
-" * \"¦b±Ò°Ê§@·~¨t²Î«e¥ý©µ¿ðªº®É¶¡\": ·í±Ò°Ê¹q¸£®É¡A·|¥ý¼È°±¤@·|®É¶¡µM«áÅý¨Ï¥Î"
-"ªÌ¿ï¾Ü­n±Ò°Ê¨º­Ó¶µ¥Ø¶i¦æ¶}¾÷¡C\n"
-"\n"
-"!! ½Ðª`·N¡A¦pªG±z¿ï¨ú¡y¨ú®ø¡z¥´ºâ¤£¦w¸Ë¶}¾÷±Ò°Êµ{¦¡ªº¸Ü¡A±z±o½T©w±z¦³¿ìªk¯à°÷"
-"¦b¤U¦¸­«·s±Ò°Ê¹q¸£«á¯à°÷¶i¤J Mandrake Linux ¨t²ÎÀô¹Ò¡C¦]¦¹¡A·í§A­n¿ï¾Ü¨ú®ø³o"
-"­Ó¦w¸Ë¶µ¥Ø«e¡A½Ð¤T«ä!!!\n"
-"\n"
-"±z¥i¥HÂI¿ï¡y¶i¶¥¡z«ö¶s¡A±z±N¦³§ó¦hµ¹±M®aµ¥¯Å¨Ï¥ÎªÌ©Ò¨Ï¥Îªº¶i¶¥¿ï¶µ¡C\n"
-"\n"
-"Mandrake Linux ¦w¸Ëµ{¦¡±N·|§â¶}¾÷ºÞ²zµ{¦¡¦w¸Ë¨ì¨t²Î¤º¡A¦p¦¹±z´N¯à°÷³z¹L³o­Ó¶}"
-"¾÷ºÞ²zµ{¦¡±Ò°Ê±z¹q¸£ªº GNU/Linux Àô¹Ò¡A¬Æ¦Ü¬O¨ä¥L¤w¸g¦w¸Ë©ó²Îªº§@·~¨t²ÎÀô"
-"¹Ò¡C\n"
-"\n"
-"·í¦w¸Ëµ{¦¡°»´ú¨ì±z¨t²Î¤w¸g¦³¦w¸Ë¤F¨ä¥L§@·~¨t²Î¡A±Ò°Ê¸Ó§@·~¨t²Îªº¶µ¥Ø±N·|¦Û°Ê"
-"ªº¥[¤J¶}¾÷¿ï³æ¤º¡A¨Ã¥]§t¤â°Ê·s¼W¶}¾÷¶µ¥Ø»P­×§ï¶}¾÷¶µ¥Øªº¤º®e³]©w¡C\n"
-"±z¥i¥H¦bÅã¥Ü¥X¥i¨Ñ¿ï¾Ü¶}¾÷¶µ¥Ø¤W§Ö³tÂI¨â¦¸Åܧ󤺮e¬Æ¦Ü¬O§R°£¸Ó±Ò°Ê¶µ¥Ø;¨Ï¥Î"
-"¡y·s¼W¡z¨Ó«Ø¥ß¶}¾÷¶µ¥Ø¤º®e; µM«áÂI¿ï¡y§¹¦¨¡z¥H«K©óÄ~Äò¶i¦æ¤U­±ªº¦w¸Ë¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) »P GRUB ³oÃþ³£¬O Linux ªº¶}¾÷®Ö¤ß¸ü¤Jµ{¦¡¡A³oÃþµ{¦¡¥»"
-"¨­°£¤F¯à°÷¥Î¨Ó¸ü¤J Linux ®Ö¤ß¶i¤J Linux ¨t²Î¡A¤]¨ã³Æ¯à°÷¥Î¨Ó±Ò°Ê¨ä¥L§@·~¨t"
-"²Î¡A¤ñ¤è¹³¬O DOS¡BWindows µ¥¡C§Ú­Ì±N·|°»´ú±z¥Ø«e¹q¸£¤W¤w¸g¦w¸Ë¦nªº§@·~¨t²Î¡A"
-"¨Ã³]©w¦n³oÃþ¶}¾÷µ{¦¡¯à°÷Åý±z©ó¶}¾÷®É¿ï¾Ü­n±Ò°Ê§A§Æ±æ­n¶i¤Jªº§@·~¨t²ÎÀô¹Ò¡C­Y"
-"¬O§A¨t²Î¦³¦w¸Ë¬Y­Ó§@·~¨t²Î¡A¦ý¬O³oÃä¨Ã¨S¦³°»´ú¥X¨Óªº¸Ü¡A±z¥i¥H©ó³oÃä¥Î¤â°Êªº"
-"¤è¦¡¨Ó·s¼W¤@­Ó±Ò°Ê¶µ¥Ø¡C\n"
-"\n"
-"¥Ø«e°»´ú¦C¥Xªº¶µ¥Ø³¡¥÷¡A­Y¬O§A¥´ºâ§R°£¨ä¤¤´X­Ó±Ò°Êªº¶µ¥Øªº¸Ü¡A¨º±z±N·|¥¢¥h¯à"
-"°÷¨Ï¥Î¸Ó¶µ¥Ø¶i¦æªº¶}¾÷¥\¯à¡C³o­Ó±¡ªp¤U¡A·í§A§R°£¨ä¤¤¤@­Ó±Ò°Ê¶µ¥Ø«á¡A«áÄò§A¤]"
-"³\´N»Ý­n¨Ï¥Î¸Ó§@·~¨t²Îªº¶}¾÷¤ù¤~¯à°÷¶i¤J³o­Ó§@·~¨t²Î¤F!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"±z¥²¶·­n«ü©w©ñ Linux ¶}¾÷µ{¦¡ªº¦ì¸m¡C\n"
-"\n"
-"°£«D±z«Ü²M·¡±z¦b°µ¤°»ò¡A§_«h³£À³¸Ó¿ï¨ú \"µwºÐªº²Ä¤@­ÓºÏ°Ï (MBR)\"¡C"
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"³o¸Ì±N­n¿ï¾Ü©Ò­n¨Ï¥Îªº¦C¦LªA°È¨t²Î¶µ¥Ø¡AMandrake Linux ³oÃä´£¨Ñ¤F¤TºØ¨Ñ±z¿ï¾Ü"
-"ªº¶µ¥Ø¡C\n"
-"\n"
-" *¡ypdq¡z- pdq ¨ä¹ê´N¬O¡uprint, don't queue¡vªºÁY¼g¡C¤@¯ë³o­Ó¦C¦LªA°Èµ{¦¡¯à°÷"
-"¦b¦Lªí¾÷¬Oª½±µ³sµ²¨ì¥»¾÷¹q¸£¤W«Ü§Ö³tªº¦C¦L¡A¥t¥~¦b¤p«¬Â²³æ¡A¦Ó¥B³t«×¤£§Öªººô"
-"¸ô¤W¨Ó¨Ï¥Î¤]¬Û·í«K§Q¡C³o­Ó¶µ¥Ø¡A¥]§t¤U­±¥i¨Ñ¿ï¾Üªº¦C¦L¨t²Î¡A³£¥i¥H¨Æ«á¨Ï¥Î "
-"PrinterDrake µ{¦¡¡AµM«á¨Ï¥Î±M®a¼Ò¦¡´N¥i¥HÅܧó³]©w¡C\n"
-"\n"
-" *¡yCUPS¡z - ¡uCommon Unix Printing System¡v¡A³o¬O¤@®M­Ó¬Û·í¦nªº¦C¦LªA°È¨t"
-"²Î¡A¹ï©óª½±µ³s½u¦w¸Ë¦b¥»¾÷¤W¡A©ÎªÌ¬O¤@¯ëºô¸ô¨Ï¥Î¤W³£¬Û·í¤£¿ù¡C³o­ÓªA°Èµ{¦¡¬Û"
-"·í²³æ¡A¤]¯à°÷¥Î¨Ï¥Î lpd ªº Server ºÝ©ÎªÌ¬O Client ºÝ³£¯à°÷¬Û®e¨Ï¥Î¡C³o­Óµ{¦¡"
-"´£¨Ñ³\¦h¥\¯à¾÷¨î¡A¨Ï¥Î³]©w¤W¤]¯à°÷¹³¬O¡updq¡vµ{¦¡ªºÂ²³æ¡C¦pªG±z§Æ±æ¯à°÷Åý "
-"CUPS ¯à°÷¼ÒÀÀ¡ulpd¡vªA°Èµ{¦¡¥\¯àªº¸Ü¡A±z»Ý­n¶}±Ò¡ucups-lpd¡v³o­ÓªA°Èµ{¦¡¡C¥t"
-"¥~¡A¥¦´£¨Ñ¤F¹Ï§Îªº¤¶­±¯à°÷Åý¨Ï¥ÎªÌ¿ï¾Ü­n¦C¦Lªº¦Lªí¾÷¡A¥]§t¬ÛÃö¦C¦L°Ñ¼Æªº½Õ"
-"¾ã¡C\n"
-"\n"
-" *¡ylprNG¡z - ¡uline printer daemon New Generation¡v¡A³o¤@®M¦C¦LªA°È¨t²Î¡A»P"
-"¥ý«e´£¨ìªº¶µ¥Ø³£¬O¨ã³Æ®t¤£¦hªº¥\¯à¡A¤£¹L³o­Ó¦C¦L¨t²Î¤ñ¸û¯S®íªº¦a¤è´N¬O¡A¦]¬°"
-"¥¦¤ä´© IPX ¨ó©w¡A©Ò¥H¯à°÷§â­n¦C¦Lªº¸ê®Æ³z¹L Novell ºô¸ô¦Lªí¾÷¡C¦C¦L¥X¨Ó¦pªG±z"
-"»Ý­n³z¹L Novellºô¸ô¦Lªí¾÷¶i¦æ¦C¦Lªº°Ê§@¡A±z¥i¥H¦Ò¼{¨Ï¥Î³o¤@®M¦C¦L¨t²Î¡C"
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX µ{¦¡¥Ø«e¥¿¦b°»´ú±z¨t²Î¤Wªº IDE ¸Ë¸m¡C¦¹¥~¡A¥¦¤]·|¶¶«K±½´y¨t²Î©Ò¦w¸Ëªº "
-"SCSI ¤¶­±¥d¡C·í°»´ú¨ì SCSI ¥d®É¡ADrakX µ{¦¡±N·|¦Û°Ê¦w¸Ë¾A·íªºSCSI ÅX°Êµ{¦¡ÅX"
-"°Ê¸Ó SCSI ³]³Æ¡C\n"
-"\n"
-"¦]¬°¦w¸Ëµ{¦¡¤]³\µLªk§¹¥þªº°»´ú¥X±zªº¨t²Î¬O§_ÁÙ¦³§ó¦hªºµwÅé¸Ë¸m¡A©Ò¥HDrakXµ{¦¡"
-"·|¸ß°Ý±zªº¨t²Î¬O§_¦³¡uPCI SCSI¡v¤¶­±¥d¦s¦b¡C·í§A¿ï¾Ü¡y¬Oªº¡zªº®É­Ô±z±N¥i¥H¤â"
-"°Ê¿ï¾Ü±z¨t²Î©Ò¦w¸ËªºSCSI¤¶­±¥dªº¶µ¥Ø¡C­Y¬O¨S¦³ªº¸Ü¡A¿ï¾Ü¡y§_¡z´N¥i¥H¤F¡C­Y¬O"
-"±z¹ê¦bµLªk½T©w¦³¨º¨ÇµwÅ鶵¥Ø¦s¦b¡A±z¥i¥H¿ï¨ú¡yÀ˵øµwÅé¸ê°T¡z¨ÃÂI¿ï¡y½T©w¡z¦^"
-"¨ì­ì¥»µe­±¡C\n"
-"\n"
-"·í±z¨Ï¥Î¤â°Ê¤è¦¡«ü©w±z¨t²Îªº¤¶­±¥d®É¡ADrakXµ{¦¡·|¸ß°Ý±z¬O§_­n¹ï³o­ÓÅX°Êµ{¦¡ÃB"
-"¥~¿é¤J¨ä¥L°Ñ¼Æ¡C±zÀ³¸Ó­n¤¹³\ DrakX ¯à°÷¥ý¦Û°Ê°»´ú¸Ó¶gÃä¸Ë¸mª¬ºA¡A°£«D¯uªºµLªk"
-"°»´ú®É¤~¤â°Ê«ü©w°Ñ¼Æ¶Ç¹Fµ¹¸ÓÅX°Êµ{¦¡¡C\n"
-"\n"
-"½Ðª`·Nªº¬O¡A­Y¬O±z­n¤â°Ê«ü©w¶Ç¤Jªº°Ñ¼Æ¡A«Øij±z½Ð°Ñ¦Ò¨Ï¥Î¤â¥Uªº²Ä¤T³¹ "
-"(\"Collecting Information on Your hardware\") ¥H«K©óÀò±o§ó¦h¬ÛÃö¸ê°T¡C"
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"±z¥i¥H¦b yaboot ¤º·s¼WÃB¥~ªº¶µ¥Ø¡A¹³¬O¥Î¨Ó±Ò°Ê¨ä¥L§@·~¨t²Î¶µ¥Ø¡B®Ö¤ß¶µ¥Ø©ÎªÌ"
-"¬Oĵ«æ¶}¾÷®Ö¤ßÀÉ®×µ¥¡C\n"
-"\n"
-"°w¹ï­n·s¼W¤@­Ó±Ò°Ê¨ä¥L§@·~¨t²Î¶µ¥Ø¨Ó¬Ý¡A¦Ü¤Ö­n¥]§t¤@­Ó \"¼ÐÅÒ\" »P®Ú¤À³Î°Ï©Ò"
-"¦b¦ì¸mªº¶µ¥Ø¡C\n"
-"\n"
-"°w¹ï Linux ¨Ó»¡¡A¦Ü¤Ö¥]§t¹³¬O:\n"
-"\n"
-" * ¼ÐÅÒ: ´N¬O Label¡A³o­Ó¶µ¥Ø´N¬O¤@­Ó¥i¥HÅý±z¦b¶}¾÷´£¥Ü°T®§®É¿é¤J¸Ó¦WºÙ¡A§Y¥i"
-"¨Ï¥Î¸Ó§@·~¨t²Î¶}¾÷¡C\n"
-"\n"
-" * ®Ö¤ß: ´N¬O Image¡A³o­Ó¶µ¥Ø¬O«ü¦V¨ì­n¨Ï¥Î¸Ó®Ö¤ßÀɮ׶}¾÷ªºÀɮצWºÙ¡C¤@¯ë¨Ó"
-"»¡¡A´N¬O¨Ï¥Î vmlinuz ©ÎªÌ¬O vmlinuz-2.4.8 µ¥³oÃþ¦WºÙ¡C\n"
-"\n"
-" * / ¤À³Î°Ï: «ü¦V¸Ó Linux ¨t²Î©Ò¦bªº / ®Ú¤À³Î°Ï¦ì¸m¡C\n"
-"\n"
-" * ªþ¥[°Ñ¼Æ: ³oÃä¥i¥H¿é¤J¤@¨ÇÃB¥~­n¶Çµ¹®Ö¤ßªº°Ñ¼Æ¡C¦b Apple ÀWªG¹q¸£µwÅé¶gÃä"
-"¸Ë¸m¤W¡A³o¸Ì¥i¥H«ü©w¤@¨Ç°Ñ¼Æ¥H«K©óªì©l¸ÜÅã¥Ü¥d¸Ë¸m¡A©ÎªÌ¬O±Ò°Ê¦bÁä½L¤Wªº·Æ¹«"
-"¸Ë¸m¡C¤U­±¬O¤@¨Ç¥i¥Îªº°Ñ¼Æ«ü©w¡A¤ñ¤è¹³¬O:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: ³o­Ó°Ñ¼Æ¬O¥Î¨Ó¯à°÷¦b®Ö¤ß¸ü¤J®É¡A¹w¥ý¸ü¤J¥i¥Îªº¼Ò²Õ¸Ë¸mÀɮסA¥H«K©ó"
-"¯à°÷¦b±¾¤J¨t²Î / ¤À³Î°Ï®É´N¤w¸g¯à°÷¦s¨ú / ©Ò¦b¸Ë¸m¡C¤@¯ë¨Ó»¡¡A·í±z¨t²Î¦w¸Ë¦b "
-"RAID¡BSCSI ¸Ë¸m¤W®É¡A¨t²Î»Ý­n¦b®Ö¤ß¸ü¤J®É¶¶«K±¾¤JÅX°Ê³o¨ÇµwÅé¸Ë¸mªºÅX°Êµ{¦¡¡A"
-"¥H«K©ó¤U­±¤~¯à°÷¥¿±`¦s¨ú³o¨Ç¸Ë¸m¡C¨Ï¥Î¸Ó¶µ¥Ø®É¡A¨t²Î·|©ó¶}¾÷®É¸ü¤J¤@­Ó©Ò¿×ªº"
-"initrd-image Àɮ׶i¦æ«áÄò°Ê§@¡C\n"
-"\n"
-" * Initrd-size: ·í±z­n¨Ï¥Î initrd-image ®É¡A¨t²Î·|¹w¥ý°t¸m¤@¶ôramdisk¥H«K©ó¸ü"
-"¤J initrd-image ÀɮרӨϥΡC¸Ó¶µ¥Ø¹w³]¼Æ­È¬°4096 KBytes¡C­Y¬O±z»Ý­n°t¸m¤@­Ó«Ü"
-"¤jªº ramdisk ¨Ï¥Î¡A³oÃä¥i¥H¤â°Ê«ü©w¡C\n"
-"\n"
-" * / ¥iŪ¼g: ¤@¯ë¨Ó»¡¡A®Ö¤ß¸ü¤J¨t²Î«á¡A¹w³]±¾¤J / ®Ú¤À³Î°Ï®É¡A¬O¨Ï¥Îread-"
-"only °ßŪ¼Ò¦¡¡A¥H«K©ó¥i¥H¦b¶}¾÷®É°»´ú¨t²ÎµwºÐ±¡ªp¡A©I¥s fsck µ{¦¡¶i¦æÀË´ú°Ê"
-"§@¡C­Y¬O§A¦³¨ä¥L»Ý­nªº¸Ü¡A§A¤~»Ý­n§â³o­Ó¶µ¥Ø¶}±Ò¡A­n¤£µM«Øij±z¤£¥Î¿ï¨ú³o­Ó¶µ"
-"¥Ø¡C\n"
-"\n"
-" * NoVideo: ¤@¯ë¬Oµ¹ Apple Åã¥Ü¥dµwÅé¸Ë¸m¸Ñ¨M¤@¨Ç°ÝÃD¨Ï¥Îªº¡C·íµM±z¥i¥H§â³o­Ó"
-"¶µ¥Ø¿ï¾Ü©ó \"novideo\" ¼Ò¦¡¡AÅý¨t²Î¨Ï¥Î­ì¥»Åã¥Ü¤è¦¡¡C\n"
-"\n"
-" * ¹w³]: ¿ï¾Ü¥Î¨Ó¹w³]¶}¾÷ªº¼ÐÅÒ¶µ¥Ø¡C¨Ì·Ó¦w¸Ë¤è¦¡ªº¤£¦P¡A¶}¾÷®É±z¥i¯à·|¬Ý¨ì¿ï"
-"³æ¼Ò¦¡¡A³o®É­Ô±z¥i¥H¥Î¤è¦VÁä¿ï¾Ü§A­n±Ò°Êªº¶µ¥Ø¡C©ÎªÌ¬O§A¬Ý¨ìªº¬O³æ¯Âªº boot: "
-"´£¥Ü°T®§¡A¦¹®É±z¥i¥H«ö¤U [Tab] «öÁä¥i¥HÀò±o¯à°÷¿ï¾Ü¿é¤Jªº¶}¾÷¶µ¥Ø¼ÐÅÒ¡C"
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot ¬O±Mªù¥Î¨Óµ¹ NewWorld MacIntosh µwÅé¹q¸£¨Ï¥Îªº¶}¾÷µ{¦¡¡C¥¦¯à°÷¥Î¨Ó±Ò"
-"°Ê GNU/Linux, MacOS ©ÎªÌ¬O MacOSX ³o¨Ç§@·~¨t²Î¡C¤@¯ë¨Ó»¡¡Aµ{¦¡±N·|°»´ú¨t²Î¥Ø"
-"«e¦w¸Ë¤F¨º¨Ç§@·~¨t²Î¡AµM«á±z´N¥i¥H«Ü¤è«Kªº¨Ï¥Î Yaboot µ{¦¡¨Ó±Ò°Ê©Ò»Ý­n¨Ï¥Îªº"
-"§@·~¨t²ÎÀô¹Ò¡C­Y³oÃä¨Ã¨S¦³°»´ú¨ì±z¥Ø«e¨t²Î¦³¦w¸Ëªº§@·~¨t²ÎÀô¹Ò¡A±z¥i¥H¦b³o­Ó"
-"¿Ã¹õ¤W¨Ï¥Î¤â°Ê¤è¦¡·s¼W©Ò»Ý­nªº¶µ¥Ø¡C½Ðª`·N¤@¤U±z¤U­±©Ò¿ï¾Ü¨Ï¥Îªº¬ÛÃö°Ñ¼Æ¡C\n"
-"\n"
-"Yaboot ªº¥D­n°Ñ¼Æ¥]§t:\n"
-"\n"
-" * Init Messages: ¥Î©ó¥X²{¶}¾÷´£¥Ü¦r¤¸®É¡A¹w¥ýÅã¥Üªº¤@¬q¤å¦r¤º®e¡C\n"
-"\n"
-" * Boot Device: «ü©w±z­n¥Î¨Ó©ñ¸m¥Î¨Ó±Ò°Ê GNU/Linux ©Ò»Ý­nªº¶}¾÷¸Ë¸m¡C\n"
-"\n"
-" * Open Firemare Delay: »P LILO ¤£¦Pªº¦a¤è´N¬O¡AYaboot ¦³¨â­Ó¥i¥Îªºdelay°Ñ¼Æ"
-"¥i¥H¨Ï¥Î¡C²Ä¤@­Ó delay °Ñ¼Æ´N¬O¥Î¨Ó«ü©w±z¥i¥H¦b¦h¤Ö®É¶¡¤º(¬í¬°³æ¦ì)¿ï¾Ü¨Ï¥Î "
-"CD, OF boot, MacOS ©ÎªÌ¬O Linux ¨Ó¶i¦æ¶}¾÷°Ê§@¡C\n"
-"\n"
-" * Kernel Boot Timeout: ³o­Ó timeout Ãþ¦ü©ó LILO ªº delay °Ñ¼Æ¡A¤]´N¬O·í¿ï¾Ü"
-"¤F¤@­Ó¶µ¥Ø«á¡A­n°±¦h¤[®É¶¡¤~¯u¥¿¶i¦æ¤U­±¶}¾÷ªº°Ê§@¡C¤@¯ë¹w³]®É¶¡¬O0.1 ¬í¡C\n"
-"\n"
-" * Enable CD Boot?: ³]©w¸Ó¶µ¥Ø¡A¨Ó¶}°_Ãö³¬¤¹³\¿ï¾Ü \"C\" ¶µ¥Ø¥Î CD ¶}¾÷¡C\n"
-"\n"
-" * Enable OF Boot?: ³]©w¸Ó¶µ¥Ø¡A¨Ó¶}°_Ãö³¬¤¹³\¿ï¾Ü \"N\" ¶}±Ò Open Firemare "
-"Delay ªº¥\¯à¡C\n"
-" * Default OS: §@¬°¹w³]¶}¾÷ªº¿ï¾Ü¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"³oÃä¥Ø«e¦C¥Xªº¬O±z¨t²Î¬ÛÃö²ÕºA¤º®e³]©w¡C¨Ì¾Ú±z¨t²Î©Ò¦w¸ËªºµwÅéÀô¹Ò¡A\n"
-"±z¥i¥H¨Ï¥Î - ½Õ¾ã¤U­±©Ò¦C¥Ü¶µ¥Ø:\n"
-"\n"
-" * \"·Æ¹«\": ¬d¬Ý¥Ø«e·Æ¹«ªº³]©w¡AÂI¿ï¸Ó«ö¶s¯à°÷§ïÅܨä³]©w­È¡C\n"
-"\n"
-" * \"Áä½L\": ¬d¬Ý¥Ø«eÁä½L°t¸m³]©w¡AÂI¿ï¸Ó«ö¶s¯à°÷§ïÅܨä³]©w­È¡C\n"
-"\n"
-" * \"®É°Ï\": ¬d¬Ý¥Ø«e®É°Ï³]©w¡AÂI¿ï¸Ó«ö¶s¯à°÷§ïÅܨä³]©w­È¡C\n"
-"\n"
-" * \"¦Lªí¾÷\": ¬d¬Ý¦Lªí¾÷³]©w¡AÂI¿ï \"¨S¦³¦Lªí¾÷\" «ö¶s±Ò°Ê¦Lªí¾÷ºëÆF¡C\n"
-"\n"
-" * \"­µ®Ä¥d\": ¦w¸Ë®É©Ò°»´ú¨ìªº¨t²Î­µ®Ä¥d¶µ¥Ø¡A¦w¸Ë¹Lµ{µLªk³]©w¤§¡C\n"
-"\n"
-" * \"¹qµø¥d\": ¦w¸Ë®É©Ò°»´ú¨ìªº¨t²Î¹qµø¥d¶µ¥Ø¡A¦w¸Ë¹Lµ{µLªk³]©w¤§¡C\n"
-"\n"
-" * \"ISDN ¥d\n"
-": ¦w¸Ë®É©Ò°»´ú¨ìªº¨t²ÎISDN¤¶­±¥d¶µ¥Ø¡AÂI¿ï¸Ó¶µ¥Ø¯à°÷³]©w¤§¡C"
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"¿ï¾Ü±z§Æ±æ¥Î¨Ó¦w¸Ë Mandrake Linux ¨t²ÎªºµwºÐ¡C·í§A¿ï¾Ü¦n«á¡A¸ÓÁûµwºÐ¤W­±©Ò¦³"
-"ªº¸ê®Æ±N·|³Q²M°£¦ÓµLªk®¾±Ï¡A½Ð¤p¤ß¾Þ§@³o­Ó¶µ¥Ø¡C"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"¦pªG±z¯uªº½T©w­n²M°£³o­ÓµwºÐ¤W­±©Ò¦³ªº¤À³Î°Ï»P¸ê®Æªº¸Ü¡AÂI¿ï¡y½T©w¡z«ö¶s¡C·í"
-"±z¿ï¾Ü³o­Ó¶µ¥Ø«á¡A´N¯uªº¨S¦³¿ìªk±Ï¦^¸ÓÁûµwºÐ¤Wªº¸ê®Æ¤F¡C\n"
-"\n"
-"±z¥i¥HÂI¿ï¡y¨ú®ø¡z«ö¶s©ñ±ó³o­Ó¿ï¾Ü¡C"
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "±z¤]¥²¶·­n®æ¦¡¤Æ %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"±z¤w¸g¿ï¾Ü¦w¸Ë¤F¤U­±ªº®M¥ó: %s\n"
-"\n"
-"\n"
-"³o¨Ç®M¥ó¦w¸Ë¦n«á¹w³]¬O±Ò°Êªº¡A¦]¬°³o¨Ç®M¥ó¬Y¨Ç¼h­±\n"
-"¨Ó»¡¬O¤ñ¸û¤£¦w¥þªº¡A©Ò¥H«Ü¦³¥i¯à¥L¤H·|¸g¥Ñ³o¨Ç®M¥ó\n"
-"ªºº|¬}¦M®`±zªº¨t²Î¡C¦]¦¹«Øij§A¦w¸Ë¦n¨t²Î«á¡A¤@©w­n\n"
-"¥ý½T©w³o¨Ç®M¥ó¬O§_¤w¸g¦³§ó·sªºª©¥»¡A­Y¬O¦³ªº¸Ü½Ð°O±o\n"
-"¤@©w­n§ó·s¡C\n"
-"\n"
-"\n"
-"±z½T©w¯uªº­n¦w¸Ë³o¨Ç®M¥ó¶µ¥Ø¶Ü¡H\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "¨S¦³ NIS °ì¦WµLªk¬d¸ßºô¸ô¸ê°T"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "½Ð¦b %s ¤¤´¡¤J¤w¸g®æ¦¡¤Æ(FAT®æ¦¡)ºÏºÐ¤ù"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "³o±i¨Ã¤£¬O FAT ®æ¦¡¤ÆªººÏºÐ¤ù"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"­n¨Ï¥Î©ÒÀx¦sªº®M¥ó¿ï¾Ü¡A¦b¶}¾÷¦w¸Ë±Ò°Ê LILO µ{¦¡ªº®É­Ô¡A©ó boot ¿é¤J:linux "
-"defcfg=floopy §Y¥i¡C"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ū¨úÀÉ®× %s ®Éµo¥Í¿ù»~"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¨t²Î¬Y¨ÇµwÅé»Ý­nÃB¥~ªºÅX°Êµ{¦¡¥H«K©ó¯à°÷ÅX°Ê¤u§@¡C\n"
-"±z¥i¥H¦b³o¸Ì§ä¨ì¤@¨Ç¬ÛÃöªº¸ê°T: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"±z¤@©w±o­n«ü©w¤@­Ó¤À³Î°Ï¨Ó©ñ®Ú¥Ø¿ý¡A­n¶i¦æ³o­Ó¤u§@\n"
-"ªº¸Ü¡A½Ð«Ø¥ß¤@­Ó¤À³Î°Ï (©Î¿ï¤@­Ó¤w¸g¦s¦bªº¤À³Î°Ï)¡A\n"
-"±µµÛ¿ï \"±¾¸üÂI\" ³o­Ó¾Þ§@¡A§â±¾¸üÂI³]¦¨ `/'¡C"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "±z¥²¶·¦³¦Ü¤Ö¤@­Ó¸m´«¤À³Î°Ï"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"±z¨S¦³³]©w¸m´«¤À³Î°Ï¡A\n"
-"\n"
-"¤£ºÞ¦p¦ó³£­nÄ~Äò ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "±z¥²¶·¦³¤@­Ó±¾¸ü©ó /boot/efi ªº FAT ¤À³Î°Ï"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "¨Ï¥Î¥¼¥Î¨ìªºªÅ¶¡"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "¨S¦³¨¬°÷ªºªÅ¶¡¥i¥H«Ø¥ß·sªº¤À³Î°Ï¤F"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "¨Ï¥Î¤w¸g¦s¦bªº¤À³Î°Ï"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "¨S¦³¤w¸g¦s¦bªº¤À³Î°Ï¥i¨Ñ¨Ï¥Î"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "¨Ï¥Î Windows ¤À³Î°Ï§@¬° loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "±z§Æ±æ­n¥Î¨º­Ó¤À³Î°Ïµ¹ Linux4Win ¨Ó¨Ï¥Î©O¡H"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "¿ï¨ú¤j¤p"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "®Ú¥Ø¿ý¤À³Î°Ïªº¤j¤p (MB)¡G "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "¸m´«¤À³Î°Ïªº¤j¤p (MB)¡G "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "¨Ï¥Î Windows ¤À³Î°Ï©Ò³Ñ¾lªº¥i¥ÎªÅ¶¡"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "±z­n±q·s³]©w¨º­Ó¤À³Î°Ïªº¤j¤p ?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "¥¿¦b­pºâ Windows Àɮרt²ÎªºÃä¬É"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"µLªk½Õ¾ã¸Ó FAT ¤À³Î°Ïªº¤j¤p¡Aµo¥Í¤F¤U­±ªº¿ù»~:\n"
-"%s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "±zªº Windows ¤À³Î°ÏÀɮרt²Î¦³ÄY­«ªºÂ_Â÷±¡ªp¡A½Ð¥ý­«²Õ°Ê§@¦A¶i¦æ"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ĵ§i!\n"
-"\n"
-"DrakX ²{¦b­n­«©w±z Windows ¤À³Î°Ïªº¤j¤p¡A½Ð¤p¤ß!! \n"
-"³o­Ó°Ê§@¬O«Ü¦MÀIªº¡A½Ð¥ýÂ÷¶}¦w¸Ëµ{¦¡¡A¦b Windows \n"
-"©³¤U°õ¦æ scandisk ¸ò defrag ¥H«á¦A¨Ó¦w¸Ë Linux¡A¦Ó¥B\n"
-"³Ì¦n¥ý±N Windows ¤À³Î°Ï©³¤Uªº¸ê®Æ°µ¦n³Æ¥÷¡C½T©w³£\n"
-"¨S°ÝÃD¥H«á¡A¤~«ö¡y½T©w¡z¶s¡C"
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "±z­n«O¯d¦h¤ÖªÅ¶¡µ¹ windows ¨Ï¥Î"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "¤À³Î°Ï %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT ­«©w¤j¤p¥¢±Ñ¡G %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "¨S¦³¥i¥Îªº FAT ¤À³Î°Ï¯à°÷½Õ¾ã¤j¤p¡A©ÎªÌ¬O¸Ó¤À³Î°Ï¨S¨¬°÷ªÅ¶¡"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "§R°£©Ò¦³ºÏºÐ¤º®e"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "²¾°£ Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "§A¨t²Î¤W¦³¦hÁûµwºÐ¥i¨Ñ¦w¸Ë Linux ¨t²Î¡A±z¥´ºâ­n·Ç³Æ¨º¤@Áû¨Ñ¦w¸Ë¨Ï¥Î¡H"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "©Ò¦³¦b %s ºÏºÐ¤Wªº¤À³Î°Ï¸ò¸ê®Æ³£·|³Q²M°£±¼"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "¦Û­qºÏºÐ¤À³Î"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "¨Ï¥Î fdisk µ{¦¡"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"±z¥Ø«e­n¹ï %s ¤À³Î°Ï¶i¦æ¹º¤À°Ê§@¡C\n"
-"·í±z§¹¦¨®É¡A§O§Ñ¤F¿é¤J 'w' ¼g¤J±zªºÅܧó"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "±zªº Windows ¤À³Î°Ï¨Ã¨S¦³¨¬°÷ªº¤À³Î°Ï !"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "§ä¤£¨ì¥ô¦ó¥i¥Îªº¦w¸ËªÅ¶¡"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX ¤À³ÎºëÆF§ä¨ì¤F¤U­±¥i¥Îªº¸Ñ¨M¤è®×¡G"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "µwºÐ¤À³Î¥¢±Ñ¡G %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "±Ò°Êºô¸ô³s½u"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ãö³¬ºô¸ô³s½u"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"µo¥Í¤F¤@­Óµ{¦¡¤£ª¾¹D¸Ó¦p¦ó§´µ½³B¸mªº¿ù»~¡A\n"
-"­nÄ~Äò¦w¸Ë¤u§@ªº¸Ü½Ð¤p¤ß¡C"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "­«½Æªº±¾¸üÂI %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"¦³¤@³¡¤À­«­nªº®M¥óµLªk¦w¸Ë¨ì¨t²Î¡C\n"
-"¥i¯à¬O±zªº cdrom µwÅ馳°ÝÃD¡A©ÎªÌ¬O CD ¦w¸Ë¤ù·´·l¤F\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Åwªï¨Ó¨ì %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "¨S¦³¥i¥Îªº³nºÐ¾÷"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "¶i¤J¨BÆJ `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"±zªº¨t²Î¸ê·½¦ü¥G¤Ó§C (¹êÅé°O¾ÐÅé¤Ó¤Öµ¥)¡A³o¥i¯à¾É­P¦b¦w¸Ë¹Lµ{¤¤·|µo¥Í\n"
-"¤£¥i¹w´Áªº¿ù»~¾É­P¦w¸Ë¥¢±Ñ¡C«Øij±z¡A­Y¬O±µ¤U¨Óªº½TµLªk¥¿±`¦w¸Ëªº¸Ü¡A\n"
-"½Ð§ï¥Î¤å¦r¼Ò¦¡ªº¤è¦¡¦w¸Ë¸û¨Î¡C\n"
-"¤]´N¬O¶}¾÷®É¥X²{ boot: °T®§®É¡A½Ð¿é¤J text ¶i¦æ¤å¦r¦w¸Ë§Y¥i¡C"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "¦w¸Ëªº¤è¦¡"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "½Ð±q¤U¦Cªº¿ï¶µ¸Ì­±¿ï¨ú¾A¦Xªº¦w¸ËºØÃþ¡G"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "±z¿ï¨úªº©Ò¦³¸s²ÕªºÁ`¦@¤j¤p¬ù¬° %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"¦pªG±z§Æ±æ¦w¸Ë¤Ö©ó¸Ó®e¶q¤j¤pªº®M¥ó¡A\n"
-"¿ï¾Ü±z§Æ±æ­n¦w¸Ë®M¥óªº¦Ê¤À¤ñ¡C\n"
-"¦Ê¤À¤ñ¶V¤Ö¡A·N¨ýµÛ¥u·|¦w¸Ë¨t²Î¥²³Æªº®M¥ó¶µ¥Ø;\n"
-"­Y¬O¦Ê¤À¤ñ¬O 100%% ªº¸Ü¡A´N¬O¦w¸Ë©Ò¦³¿ï¾Üªº®M¥ó¡C"
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"±z¥Ø«e¨t²Î¥i¥ÎªÅ¶¡¥u¯à°÷¦w¸Ë %d%% ªº®M¥ó¼Æ¶q¡C\n"
-"\n"
-"¦pªG±z§Æ±æ¦w¸Ë¤Ö©ó¸Ó®e¶q¤j¤pªº®M¥ó¡A\n"
-"¿ï¾Ü±z§Æ±æ­n¦w¸Ë®M¥óªº¦Ê¤À¤ñ¡C\n"
-"¦Ê¤À¤ñ¶V¤Ö¡A·N¨ýµÛ¥u·|¦w¸Ë¨t²Î¥²³Æªº®M¥ó¶µ¥Ø;\n"
-"¦Ê¤À¤ñ %d%% ¬OºÉ¥i¯à¦w¸Ë¶V¦h®M¥ó¡C"
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "±zÁÙ¥i¥H¦b±µ¤U¨Óªº¨BÆJ¤¤§@§óºë½Tªº®M¥ó¿ï¾Ü"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "·Ç³Æ¦w¸Ëªº®M¥ó¦û©Ò¦³®M¥óªº¤ñ¨Ò"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "¨Ì¸s²Õ¿ï¨ú­n¦w¸Ëªº®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "¿ï¨ú³æ¤@®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Á`¦@¤j¤p¡G %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "·´·lªº®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "¦WºÙ¡G %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "ª©¥»½s¸¹¡G %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "¤j¤p¡G %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "­«­n©Ê¡G %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "¦]¬°µwºÐªÅ¶¡¤£¨¬¡A±z¤£¥i¥H¿ï¨ú³o­Ó®M¥ó¡C"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "¤U¦Cªº®M¥ó±N·|³Q¦w¸Ë¤W"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "¤U¦Cªº®M¥ó±N·|³Q²¾°£"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "±z¤£¥i¥H¤Á´«³o­Ó®M¥óªºª¬ºA"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "³o¬O¤@­Ó¥²­nªº®M¥ó¡A±z¤£¥i¥H¿ï¾Ü¤£­n¦w¸Ë³o­Ó®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "³o­Ó®M¥ó¤w¸g¦w¸Ë¦b¨t²Î¤W¤F¡A±z¤£¥i¥H¤£¿ï³o­Ó®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"³o­Ó®M¥ó¤@©w­n§ó·s¤~¦æ¡A\n"
-"±z½T©w±z¤£­n¿ï¥¦¶Ü?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "³o­Ó®M¥ó¤@©w­n§ó·s¤~¦æ¡A±z¤£¥i¥H¤£¿ï³o­Ó®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Åã¥Ü¦Û°Ê¿ï¨úªº®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "¦w¸Ë"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "¥Ñ³nºÐ¸ü¤J/Àx¦s"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "¥¿¦b§ó·s®M¥óªº¿ï¾Ü"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "³Ì¤p¦w¸Ë"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "¿ï¾Ü±z·Q­n¦w¸Ëªº®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "¥¿¦b¦w¸Ë"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "¥¿¦b¦ô­p"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "³Ñ¾l®É¶¡"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "¥¿¦b·Ç³Æ¦w¸Ë¤u§@..."
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ­Ó®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "¥¿¦b¦w¸Ë %s ®M¥ó"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "±µ¨ü"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "©Úµ´"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"´«¤ù¤F!\n"
-"\n"
-"½Ð§ó´«©R¦W¬° \"%s\" ªº¦w¸Ë¤ù¡AµM«á«ö¤U½T©wÄ~Äò¡C\n"
-"­Y¬O±z¨Ã¨S¦³³o±i¦w¸Ë¤ù¡A½ÐÂI¿ï¨ú®ø²¤¹L³o¤@¤ùªº¦w¸Ëªº°Ê§@¡C"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "µL½×¦p¦ó³£­nÄ~Äò¶Ü ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "±Æ¦C®M¥ó®Éµo¥Í¿ù»~¡G"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "¦w¸Ë®M¥ó®Éµo¥Í¿ù»~¡G"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "µo¥Í¤@­Ó¿ù»~"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "±z½T©w­nµ²§ô¦w¸Ëµ{¦¡¶Ü¡H"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "ª©Åv¨óij"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Áä½L"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "½Ð¿ï¨úÁä½L±Æ¦Cªº®æ¦¡¬O¨º¤@ºØ¡C"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "¤U­±²M³æ¬O¥i¨Ñ¿ï¾ÜªºÁä½L¦Cªí"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "±z·Q¥Î¨ººØ¦w¸Ë¤è¦¡ ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "¦w¸Ë/¤É¯Å"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "±z­n¶i¦æ¦w¸Ë©Î¬O¤É¯Å¡H"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "«Øij­È"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "¦Û­q"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "¤É¯Å"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "¶È¤É¯Å®M¥ó"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "½Ð¿ï¨ú·Æ¹«ªº§Î¦¡¡C"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "·Æ¹«³s±µ°ð"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "½Ð¿ï¨ú±z·Æ¹«³s±µªº§Ç¦C°ð¡C"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "«öÁä¼ÒÀÀ"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "¨âÁä¼ÒÀÀ"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "¤TÁä¼ÒÀÀ"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "¥¿¦b³]©w PCMCIA ¥d..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "³]©w IDE ¸Ë¸m"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "§ä¤£¨ì¥i¥Îªº¤À³Î°Ï"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "¥¿¦b±½´y¤À³Î°Ï©ÒÄݪº±¾¤JÂI"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "¿ï¨ú±¾¸üÂI"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"µ{¦¡µLªkŪ¨ú±zªºµwºÐ¤À³Î°Ï°t¸mªí¡A³o­Ó°t¸mªí¦³°ÝÃD :(\n"
-"µ{¦¡¥i¥HÄ~Äò¨Ã²MªÅÃaªº¤À³Î°Ï (©Ò¦³ªº¸ê®Æ³£·|®ø¥¢)¡A©ÎªÌ\n"
-"±z¤]¥i¥H¸T¤î DrakX ¦w¸Ëµ{¦¡­×§ïµwºÐ¤À³Îªí¡C\n"
-"(¿ù»~¬O %s)\n"
-"\n"
-"±z¦P·N²M°£©Ò¦³ªº³o¨Ç¤À³Î°Ï¶Ü?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake µLªk¥¿½TŪ¨úµwºÐ¤À³Î°Ï°t¸mªí¡A\n"
-"Ä~Äò¦w¸Ë¤u§@¬O«Ü¦MÀIªº !!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"¨S¦³¨¬°÷ªº¥i¥ÎªÅ¶¡¦w¸Ë¶}¾÷ºÞ²zµ{¦¡! ¦w¸ËÁÙ¬O·|Ä~Äò¡A¦ý¬O±z»Ý­n¨Ï¥Î ¶}¾÷¤ù¤~¯à"
-"°÷¥¿½T±Ò°Ê¨t²Î¡C"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "§ä¤£¨ì¨t²Î®Ú¥Ø¿ý©Ò¦bªº¤À³Î°Ï¦]¦¹µLªk¤É¯Å"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "®Ú¥Ø¿ý©Ò¦bªº¤À³Î°Ï"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "±z¨t²Î¤W¥Î¨Ó§@¬°®Ú¥Ø¿ý (/) ªº¤À³Î°Ï¬O¨º¤@­Ó ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "±z¶·­n­«·s¶}¾÷¥H¨Ï¥Î§ó°Ê¹LªºµwºÐ¤À³Îªí"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "¿ï¾Ü­n®æ¦¡¤Æªº¤À³Î°Ï"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "ÀˬdÃa±¼ªººÏ°Ï?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "¥¿¦b®æ¦¡¤Æ¤À³Î°Ï"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "«Ø¥ß¨Ã®æ¦¡¤ÆÀÉ®× %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "¨S¦³¨¬°÷ªºµêÀÀ°O¾ÐÅé¥i¥H¥Î¨Ó§¹¦¨¦w¸Ë§@·~¡A½Ð¼W¥[¸m´«ªÅ¶¡"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "¥¿¦b·j´M¥i¥H¦w¸Ëªº®M¥ó"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "¥¿¦b·j´M»Ý­n¤É¯Åªº®M¥ó"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "±zªº¨t²Î¨S¦³¨¬°÷ªºªÅ¶¡¥i¥H¥Î¨Ó¦w¸Ë©Î¤É¯Å¤F (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "§¹¾ã (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "³Ì¤p (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "«Øij (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"½Ð¿ï¾Ü¦b¸ü¤J©ÎªÌ¬OÀx¦s©Ò¿ï¾Üªº®M¥ó¨ìºÏ¤ù¤º¡C\n"
-"¸ÓºÏ¤ù®æ¦¡´N¬O¦Û°Ê¦w¸Ë®É©Ò»s§@²£¥ÍªººÏ¤ù®æ¦¡¡C"
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "¸ü¤J³nºÐ¤¤ªº³]©w­È"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "¥¿¦b¸ü¤J³nºÐ¤¤ªº³]©w­È"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "®M¥ó¿ï¨ú"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "½Ð´¡¤J¤@±i¥]§t³nÅé¿ï¨ú²M³æ¬ö¿ýªººÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Àx¦s³]©w¨ìºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "©Ò¿ï¨ú¬ö¿ýªº¶µ¥Ø¶W¹L¥i¥ÎªººÏºÐªÅ¶¡"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "¦w¸ËÃþ«¬"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"±z¨Ã¥¼¿ï¨ú¥ô¦ó®M¥ó¸s²Õ\n"
-"½Ð¿ï¾Ü±z©Ò»Ý­nªº³Ì¤p¦w¸Ë"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "¥]§t X Àô¹Ò"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "¥]§t°ò¥»ªº»¡©ú¤å¥ó («Øij)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "¯u¥¿³Ì¤p¦w¸Ë (µL urpmi µ{¦¡ )"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"¦pªG±z¦³¤U­±²M³æ¤º©Ò¦C¥Xªº CD ¥úºÐ¤ù¡A½Ð¿ï¾Ü½T©w¡C\n"
-"¦pªG³£¨S¦³ªº¸Ü¡A½Ð¿ï¾Ü¨ú®ø¡C\n"
-"¦pªG¦³¤@¨Ç¶µ¥Ø±z¨Ã¨S¦³ªº¸Ü¡A§â¸Ó¶µ¥Ø¨ú®ø¿ï¨ú¡AµM«á«ö¤U½T©wÄ~Äò¡C"
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "¼Ð¬° \"%s\" ªº¥úºÐ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "¥¿¦b·Ç³Æ¦w¸Ë¤u§@"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"¥¿¦b¦w¸Ë %s ®M¥ó\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "¦w¸Ë«áªº¶i¤@¨B³]©w"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "½Ð¦b %s ºÏºÐ¾÷¤º´¡¤J¤@±i¥i¶}¾÷ºÏºÐ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "½Ð¦b %s ºÏºÐ¾÷¤º´¡¤J¤@±i¥]§t§ó·s¼Ò²Õ¸ê®ÆªººÏºÐ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"¦b¡uLinux Distribution¡v¨C¹jµo¦æ¤@¬q®É¶¡«á¡A\n"
-"¼t°Ó³£·|©ñ¥X¬ÛÃöªº­×¥¿®M¥ó¨Ñ¨Ï¥ÎªÌ¦w¸Ë§ó·s¡C\n"
-"\n"
-"±z²{¦b´N¯à°÷ª½±µ¨ú±o¥Ø«e³Ì·sªº¬ÛÃö®M¥ó­×¥¿¸ê°T¡A\n"
-"¤£¹L«e´£´N¬O±zªººô¸ô³s½u³]©w¤w¸gµL»~¥i¥H¥¿±`¨Ï¥Î¡C\n"
-"\n"
-"¨º±z¥´ºâ­n¦w¸Ë§ó·s®M¥ó¶Ü¡H"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "³sµ²¨ì Mirror Linux Web Site ¬d¸ß¥i¥Îªº¬M®g¯¸¥x"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "¿ï¨ú­n¥Î¨Ó§ì¨úµ{¦¡®M¥óÀɪº FTP ¬M®g¯¸¥x"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "¦V FTP ¬M®g¯¸¥x¬d¸ß¥i¥Îªºµ{¦¡®M¥ó¦Cªí"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "±zªº®É°Ï¬°¦ó ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "µwÅé®ÉÄÁ³]©w¬° GMT ®É¶¡"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "¦Û°Ê³z¹L NTP ªA°È®Õ®É"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ¦øªA¥D¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "»·ºÝ CUPS ¦øªA¾¹"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "µL¦Lªí¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "±z¨t²Î¦³ ISA ­µ®Ä¥d¶Ü¡H"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "½Ð¦b¦w¸Ë§¹²¦«á¡A°õ¦æ \"sndconfig\" ¨Ó³]©w­µ®Ä¥d"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "¨S°»´ú¨ì¥ô¦ó­µ®Ä¥d¡C½Ð¦b¦w¸Ë«á°õ¦æ \"harddrake\" ¶i¦æ³]©w"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Á`µ²"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "·Æ¹«"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "®É°Ï"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "¦Lªí¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN ¤¶­±¥d"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "­µ®Ä¥d"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "¹qµø¥d"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "¨Ï¥Î LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "¨Ï¥Î NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "¥»¾÷±K½XÀÉ"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "³]©w root ±K½X"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "¨S¦³±K½X"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "³o­Ó±K½X¤Ó²³æ¤F (¤@©w¦Ü¤Ö­n¦³ %d ­Ó¦r¤¸¤~¦æ)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "»{ÃҤ覡"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP »{ÃÒ"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP ªº dn Äæ¦ì"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP ¦øªA¥D¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS »{ÃÒ"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS °ì¦W"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ¦øªA¥D¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"»s§@¤@¶ô¶}¾÷¤ù¥i¥HÅý±z¤£¥²¨Ì¾aµwºÐ¤Wªº¶}¾÷\n"
-"µ{¦¡´N¥i¥H¶}¾÷¶i¤J±zªº Linux ¨t²Î¡A·í±z¤£§Æ\n"
-"±æ¦b¨t²Î¤W¦w¸Ë SILO ªº®É­Ô·|«Ü¦³¥Î¡A\n"
-"©ÎªÌ·í¨ä¥L§@·~¨t²Î»\±¼ SILO¡B·í SILO ¦b±zªºµw\n"
-"Åé¤WµLªk¥¿±`¹B§@ªº®É­Ô¡A¦³¤@¶ô¶}¾÷¤ù±N·|Åý±z\n"
-"¬Ù¨Æ¤£¤Ö¡A¦¹¥~¡A³o¶ô¶}¾÷¤ùÁÙ¥i¥H¸ò Mandrake ´£\n"
-"¨Ñªº±Ï´©ºÏ¤ù (rescue disk) ¤@°_¨Ï¥Î¡AÅý±z¦b¨t²Î\n"
-"µo¥Í°ÝÃD®É¥i¥H¶}¾÷¶i¥h¶i¦æ­×´_ªº¤u§@¡C\n"
-"­Y±z§Æ±æ¦w¸Ëµ{¦¡À°±z»s§@¤@±i¶}¾÷ºÏ¤ùªº¸Ü¡A½Ð¦b\n"
-"³nºÐ¾÷¸Ì­±´¡¤J¤@¶ôºÏ¤ù¨Ã¿ï¨ú¡y½T©w¡z¡C"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "²Ä¤@¥x³nºÐ"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "²Ä¤G¥x³nºÐ"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "²¤¹L"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"»s§@¤@¶ô¶}¾÷¤ù¥i¥HÅý±z¤£¥²¨Ì¾aµwºÐ¤Wªº¶}¾÷\n"
-"µ{¦¡´N¥i¥H¶}¾÷¶i¤J±zªº Linux ¨t²Î¡A·í±z¤£§Æ\n"
-"±æ¦b¨t²Î¤W¦w¸Ë LILO (©Î grub) ªº®É­Ô·|«Ü¦³¥Î¡A\n"
-"©ÎªÌ·í¨ä¥L§@·~¨t²Î»\±¼ LILO¡B·í LILO ¦b±zªºµw\n"
-"Åé¤WµLªk¥¿±`¹B§@ªº®É­Ô¡A¦³¤@¶ô¶}¾÷¤ù±N·|Åý±z\n"
-"¬Ù¨Æ¤£¤Ö¡A¦¹¥~¡A³o¶ô¶}¾÷¤ùÁÙ¥i¥H¸ò Mandrake ´£\n"
-"¨Ñªº±Ï´©ºÏ¤ù (rescue disk) ¤@°_¨Ï¥Î¡AÅý±z¦b¨t²Î\n"
-"µo¥Í°ÝÃD®É¥i¥H¶}¾÷¶i¥h¶i¦æ­×´_ªº¤u§@¡F±z§Æ±æ\n"
-"¦w¸Ëµ{¦¡À°±z»s§@¤@±i¶}¾÷ºÏ¤ù¶Ü?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ĵ§i¡I±zªº root ¤À³Î°Ï¥Ø«e¬O¨Ï¥Î XFS Àɮרt²Î¡A\n"
-"¥Ñ©ó XFS ÅX°Êµ{¦¡¤Ó¤j¤F¡A©Ò¥H»s§@¶}¾÷¤ù®É±NµLªk\n"
-"¥¿½Tªº±N XFS ¼Ò²ÕÅX°Êµ{¦¡Àɮשñ¤J)¡C"
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "¤£¦n·N«ä¡A§ä¤£¨ì³nºÐ¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "¿ï¾Ü­n¥Î¨Ó»s§@¶}¾÷ºÏ¤ùªº³nºÐ¾÷"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "½Ð¦b %s ¤¤´¡¤JºÏºÐ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "¥¿¦b»s§@¶}¾÷ºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "¥¿¦b·Ç³Æ¶}¾÷µ{¦¡"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"±zªº¨t²Î¦ü¥G¦³ OldWorld ©ÎªÌ¬O¨ä¥L¤£»{ÃѪº¶µ¥Ø¡A\n"
-"³o±N·|¾É­Pyaboot ¶}¾÷±Ò°Êµ{¦¡µLªk¥¿±`¹B§@¡C¦w¸ËÁÙ¬O·|\n"
-"Ä~Äò¤U¥h¡A¤£¹L±z¤]³\»Ý­n¨Ï¥Î bootX ¨Ó±Ò°Ê§Aªº¹q¸£¡C"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "±z­n¨Ï¥Î aboot ¶Ü ?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"¦w¸Ë aboot ®Éµo¥Í¿ù»~¡A\n"
-"§A­n«_µÛ¥i¯à·´·l²Ä¤@­Ó¤À³Î°Ïªº±jªp±j­¢¦A¦¸¦w¸Ë¶Ü¡H"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "¥¿¦b¦w¸Ë¶}¾÷µ{¦¡"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "¶}¾÷µ{¦¡¦w¸Ë¥¢±Ñ¡Aµo¥Í¦p¤U¤§¿ù»~¡G"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"±z¤]³\»Ý­n§ïÅܱzªº Open Firmware ¤W­±ªº¶}¾÷¸Ë¸m³]©w¡A¥H«K©ó¶}±Ò\n"
-"¶}¾÷±Ò°Êµ{¦¡ªº¥\¯à¡C¦pªG±z¶}¾÷®É¨Ã¨S¦³¶}¨ì¶}¾÷µ{¦¡ªº¥ô¦ó°T®§¡A\n"
-"©ó­«·s¶}¾÷®É«ö¦í Command-Option-O-F¡AµM«á¿é¤J:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"µM«á¦A¿é¤J: shut-down\n"
-"µM«á§A¤U¤@¦¸¶}¾÷®ÉÀ³¸Ó´N¥i¥H¬Ý¨ì¶}¾÷±Ò°Êµ{¦¡ªº°T®§¤F¡C"
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "½Ð¦b %s ¤¤´¡¤J¤@¤ùªÅ¥ÕºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "¥¿¦b»s§@¦Û°Ê¦w¸ËºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"ÁÙ¦³¨Ç¨BÆJ¨S¦³§¹¦¨¡A\n"
-"\n"
-"±z½T©w­nµ²§ô¦w¸Ëµ{¦¡¡H"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"®¥³ß!! ¨t²Î¤w¸g§¹¦¨¦w¸Ë¡A½Ð¨ú¥X¶}¾÷¥úºÐ©ÎºÏ¤ù¡A\n"
-"±µµÛ«ö Enter Áä­«·s¶}¾÷¡C\n"
-"\n"
-"\n"
-"­nÀò±o Mandrake Linux ªº¬ÛÃö¸ê°T©Îµ{¦¡­×¥¿°T®§ªº¸Ü¡A\n"
-"½Ð°Ñ¦Ò Mandrake ¤½¥qªººô­¶¥H¤Îµ{¦¡°É»~ªí: \n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Ãö©ó³]©w¨t²Îªº¸ê°T¡A±z¥i¥H¦b Mandrake Linux ¨Ï¥Î\n"
-"¤â¥U (Official Mandrake Linux User's Guide) ¸Ì­±§ä¨ì¡C"
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "»s§@¦Û°Ê¦w¸ËºÏ¤ù"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"¦Û°Ê¦w¸Ë¥\¯à¡A¥i¥H§¹¥þº¡¨¬±z§Æ±æ¯à°÷¦Û°Ê¤Æªº¦b¤@¥x\n"
-"¹q¸£¤W¶i¦æ¨t²Î¦w¸Ëªº°Ê§@¡C\n"
-"\n"
-"³o­Ó¥\¯à¡A±z´N¥i¥H¶i¦æ©Ò¿×ªº¦Û°Ê¤Æ¶i¦æ¦w¸Ëªº¾÷¨î¡C\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "¦Û°Ê¤Æ"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "­«¼½"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Àx¦s©Ò¿ï¨úªºÀÉ®×"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux ¦w¸Ëµ{¦¡ %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> ¦b¶µ¥Ø¶¡²¾°Ê    | <Space> ¿ï¨ú    | <F12> ¤U­Ó¿Ã¹õ"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu µ{¦¡¤£¨£¤F"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper µ{¦¡¿ò¥¢"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "¿ï¾ÜÀÉ®×"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "¶i¶¥"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "°ò¥»"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "½Ðµy­Ô"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "¸ê°T"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "®i¶}¾ðª¬µ²ºc"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "ÁYÅ|¾ðª¬µ²ºc"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "¤Á´«¬O§_¨Ì·Ó¸s²Õ¨Ó¥[¥H±Æ§Ç"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Ãa¿ï¾Ü¡A½Ð¦A¸Õ¤@¹M\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "±zªº¿ï¾Ü? (¹w³]¬° %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "±zªº¿ï¾Ü? (0/1¡A¹w³]¬° `%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "«ö¶s `%s'¡G %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "±z­n«ö³o­Ó«ö¶s¶Ü¡H"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "±zªº¿ï¾Ü? (¹w³]¬° `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "%s ¤W¦³«Ü¦hªº¶µ¥Ø¥i¨Ñ¿ï¾Ü¡C\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"½Ð¿ï¨ú±z­n½s¿èªº«e10­Ó¶µ¥Ø¡A«ö¤UEnterÄ~Äò¡C\n"
-"±z¥Ø«e¿ï¾Ü¬O¡H"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> ½Ðª`·N¡A¸Ó¶µ¥Ø¤w¸gÅܧó¤F:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "­«·s°e¥X"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "±¶§J (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "¼w°ê"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "¦è¯Z¤ú"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "ªâÄõ"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "ªk°ê"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "®¿«Â"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "ªiÄõ"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "«Xù´µ"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "·ç¨å"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "­^¦¡Áä½L"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "¬ü¦¡Áä½L"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "ªüº¸¤Ú¥§¨È"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "¨È¬ü¥§¨È (old)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "¨È¬ü¥§¨È (typewriter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "¨È¬ü¥§¨È (phonetic)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "ĬÁp¦@©M°ê (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "¤ñ§Q®É"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "«O¥[§Q¨È (phonetic)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "«O¥[§Q¨È"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "¤Ú¦è (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusian"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "·ç¤h (¼w°ê¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "·ç¤h (ªk°ê¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "±¶§J (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "¼w°ê (no dead keys)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "¤¦³Á"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedish)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "·R¨F¥§¨È"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "³ìªv¨È (\"«X°ê¦¡\" °t¸m)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "³ìªv¨È (\"©Ô¤B¦¡\" °t¸m)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "§Æþ"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "¦I¤ú§Q"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "§Jù®J¦è¨È"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "¥H¦â¦C"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "¥H¦â¦C (­µ¼Ð)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "¥ì®Ô"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "¦B®q"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "¸q¤j§Q"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "¤é¥» 106 Áä"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Áú¦¡Áä½L"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "©Ô¤B¬ü¬w"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "¥ß³³©{ ( AZERTY ¦¡)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "¥ß³³©{ (·s AZERTY ¦¡)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "¥ß³³©{ (number row, QWERTY ¦¡)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "¥ß³³©{ (phonetic, QWERTY ¦¡)"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "©Ô¦«ºû¨È"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "°¨¨ä¹y"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "²üÄõ"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "ªiÄõ (qwerty ¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "ªiÄõ (qwertz ¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "¸²µå¤ú"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "¥[®³¤j (»í¥_§J)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "ù°¨¥§¨È (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "ù°¨¥§¨È (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "«Xù´µ (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "´µ¬¥ªk¥§¨È"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "´µ¬¥ªk§J (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "´µ¬¥ªk§J (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "¶ëº¸ºû¨È¤H (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "®õ¦¡Áä½L"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik Áä½L"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "¤g¦Õ¨ä (¶Ç²Î¦¡ \"F\" «¬)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "¤g¦Õ¨ä (²{¥N¦¡ \"Q\" «¬)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "¯Q§JÄõ"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "¬ü¦¡Áä½L (°ê»Ú³q¥Î«¬)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "¶V«n \"numeric row\" QWERTY ¦¡"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "«n´µ©Ô¤Ò (©Ô¤B¦¡°t¸m)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "¥k¤è Alt «öÁä"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "¦P®É¨âÃä Shift «öÁä"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Ctrl »P Shift ²Õ¦X«öÁä"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock «öÁä"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl »P Alt ²Õ¦X«öÁä"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt »P Shift ²Õ¦X«öÁä"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"¿ï³æ\" «öÁä"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "¥ªÃä \"Windows\" «öÁä"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "¥kÃä \"Windows\" «öÁä"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "%s ³Q´`Àô±¾¸ü\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "¥ý²¾°£ logical volume ¸Ë¸m\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "³oÃ䪺 PCMCIA ¤£¦A¤ä´© kernel 2.2 ªºª©¥»¡A«Øij½Ð¨Ï¥Î kernel 2.4¡C"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - ·Æ¹«"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "¤@¯ë PS/2 Wheel ·Æ¹«"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "¤@­Ó«öÁä"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "¤@¯ëªº¨âÁ䦡·Æ¹«"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "¤@¯ë"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "ºu½ü"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "§Ç¦C"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "¤@¯ëªº¤TÁ䦡·Æ¹«"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech Bus Mouse"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "¨â­Ó«öÁä"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "¤T­Ó«öÁä"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "µL"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "µL·Æ¹«"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "½Ð´ú¸Õ·Æ¹«"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "¬°¤FÅý±zªº·Æ¹«¯à°÷¨Ï¥Î"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "²¾°Ê±zªººu½ü !"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "§¹¦¨"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "¤U¤@¨B ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ¤W¤@¨B"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "³o¼Ë¤l¥¿½T¶Ü¡H"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "³s½u¨ì Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"±`¨£¼·±µ¦¡ ADSL ´N¬O¨Ï¥Î pppoe µ{¦¡\n"
-"¦³¨Ç³s½u¬O¨Ï¥Î pptp µ{¦¡¡A¬Æ¦Ü¦³ªº¬O¨Ï¥Î dhcp\n"
-"­Y¬O±z¤£²M·¡ªº¸Ü¡A½Ð¿ï¾Ü¨Ï¥Î pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "¨Ï¥Î dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "¨Ï¥Î pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "¨Ï¥Î pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"±z­n¨Ï¥Î­þ¤@­Ó dhcp ¨Ï¥ÎºÝµ{¦¡?\n"
-"¹w³]¬O¥Î dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr "¨t²Î°»´ú¤£¨ì¦³¥ô¦óºô¸ô¥dªº¦w¸Ë¡C©Ò¥HµLªk³]©w³sµ²Ãþ«¬¡C"
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "¿ï¨úºô¸ô¤¶­±"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "½Ð¿ï¾Ü±z­n¥Î¨Ó³s¤W Internet ªººô¸ô¥d"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "§ä¤£¨ìºô¸ô¥d"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "³]©wºô¸ô¤¤"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"½Ð¿é¤J±zªº¥D¾÷¦WºÙ¡A¬Y¨Ç DHCP ¥D¾÷·|­n¨D¦³\n"
-"¥D¾÷¦WºÙ¤~¯à¨Ï¥Î¡A±zªº¥D¾÷¦WºÙÀ³¸Ó­n¬O¤@­Ó\n"
-"¦X®æ¥D¾÷¥þ¦W (FQDN)¡A¦p ¡umybox.mylab.myco.com¡v¡C"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "¥D¾÷¦WºÙ"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "ºô¸ô³]©wºëÆF"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "¥~³¡ ISDN Modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "¤º³¡ ISDN ¤¶­±¥d"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "±zªº ISDN ³s½uºØÃþ¬°¦ó ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"±z­n¨Ï¥Î¨º¤@ºØ ISDN ²ÕºA¡H\n"
-"\n"
-"* ªº²ÕºA³]©w¬O¨Ï¥Î isdn4net¡A¥¦¥]§t³\¦h«Ü¦n¥Îªº¤u¨ã¡A¦ý¬O\n"
-"  ¦ý¬O³o­Óµ{¦¡«ÜÃø³]©w¡A¤]¤£¬O«Ü¼Ð·Ç¡C\n"
-"\n"
-"* ·sªº²ÕºA³]©w¤ñ¸û®e©ö¤F¸Ñ¡A¤]§ó¼Ð·Ç¡A¥u¤£¹L¥i¥Îªº¤u¨ã·|¤Ö¤@ÂI¡C\n"
-"\n"
-"«Øij±z¨Ï¥Î light ²ÕºA³]©w¸û¨Î¡C\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "·sªº²ÕºA³]©w (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ªº²ÕºA³]©w (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN ³]©w"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"¿ï¾Ü±zªº ISP ¼t°Ó¡C\n"
-" ¦pªG¨Ã¨S¦³¥]§t¦b²M³æ¤º¡A½Ð¿ï¾Ü¥¼¦C¦b²M³æ¤º"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europe ³q°T¨ó©w"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europe ³q°T¨ó©w (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "¨ä¥Lªº¨ó©w"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"¨ä¥Lªº³q°T¨ó©w \n"
-"µL D-Channel (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "±z­n¨Ï¥Î¨º­Ó³q°T¨ó©w ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "±zªº¥dÄݩ󨺺اΦ¡?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "¤£²M·¡"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"¦pªG¨t²Î¦w¸Ëªº¬O¡uISA ¤¶­±¥d¡v¡A¤U¤@­Ó¿Ã¹õ©ÒÅã¥Üªº¼Æ­ÈÀ³¸Ó\n"
-"¬O¥¿½Tªº¡C\n"
-"\n"
-"¦pªG¨t²Î¦w¸Ëªº¬O ¡uPCMCIA¤¶­±¥d¡v¡A¨º±zÀ³¸Ó­nª¾¹D³o±i¥dªº\n"
-"¡uIO ³sµ²°ð¡v»P ¡uIRQ¡v¡C\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "©ñ±ó"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Ä~Äò"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "±zªº ISDN ¥d¬°¦ó ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"°»´ú¨ì ISDN PCI ¥d¡A¦ý¬O¤£²M·¡¬O¨º­ÓÃþ«¬¡C½Ð¦b¤U¤@­Ó¿Ã¹õ¿ï¾Ü³o±i¥dªºÃþ«¬¡C"
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "§ä¤£¨ì ISDN PCI ¤¶­±¥d¡A½Ð¦b¤U¤@­Ó¿Ã¹õ¤â°Ê¿ï¾Ü¤@±i¡C"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "½Ð¿ï¨ú±z¼Æ¾Ú¾÷³s±µªº§Ç¦C°ð¡C"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "¼·¸¹¿ï¶µ"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "³s½u¦WºÙ"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "¹q¸Ü¸¹½X"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "µn¤Jªº±b¸¹¦WºÙ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-based"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-based"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "ºô°ì¦WºÙ"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "²Ä¤@¥xDNS¦øªA¾¹ (¥i¤£¿é¤J)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "²Ä¤G¥xDNS¦øªA¾¹ (¥i¤£¿é¤J)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"±z¥i¥H¤ÁÂ_³s½u©ÎªÌ¬O­«·s³]©w±zªº³s½u¡C"
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"±z¥i¥H­«·s³]©w±zªº³s½u¡C"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "±z¥Ø«e¥¿³s½u¨ì Internet¡C"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"±z¥i¥H³s½u¨ì Internet ©ÎªÌ¬O­«·s³]©w±zªº³s½u¡C"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "±z¥Ø«e©|¥¼³s½u¨ì Internet¡C"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "³s½u"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "¤ÁÂ_³s½u"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "³s½u³]©w"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Intenet ³s½u»P³]©w"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "·Ç³Æ³]©w %s ªº³s½u¡C"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"·Ç³Æ³]©w %s ªº³s½u¡C\n"
-"\n"
-"\n"
-"«ö½T©wÄ~Äò¡C"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "ºô¸ô³]©w"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"¦]¬°±z¬O³z¹Lºô¸ô¦w¸Ë¡A©Ò¥H±zªººô¸ô²ÕºA¤w¸g³]©w¹L¤F¡C\n"
-"±z¥i¥HÂI¿ï½T©w¨Ï¥Î­ì¥»ºô¸ôªº³]©w²ÕºA¡A©ÎªÌ¬O¿ï¨ú¨ú®ø\n"
-"¨Ó­«·s³]©wºô¸ô³s½u¤è¦¡¡C\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Åwªï¨Ó¨ìºô¸ô³]©wºëÆF\n"
-"\n"
-"¥Ø«e¥¿·Ç³Æ¨Ó³]©w±zªººô¸ô³s½u¡C\n"
-"\n"
-"¦pªG±z­n¤â°Ê³]©wªº¸Ü¡A½Ð¨ú®ø¤U­±ªº¶µ¥Ø¡C\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "½Ð¿ï¨ú­n³]©wªº¶µ¥Ø"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "¨Ï¥Î¦Û°Ê°»´ú"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "¥¿¦b°»´ú¸Ë¸m..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "¤@¯ë modem ³s½u¤è¦¡"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "©ó port %s °»´ú¨ì"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ³s½u"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "°»´ú¨ì %s "
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL ³s½u"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "©ó %s ¤¶­±°»´ú¨ì"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Cable ³s½u"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "°»´ú¨ì cable ³s½u"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "°Ï°ìºô¸ô³s½u"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "°»´ú¨ì ethernet ºô¸ô¥d"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "¿ï¾Ü±z­n³]©wªº³s½u¶µ¥Ø"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"±z¤w¸g¿ï¾Ü³]©w¦h­Ó¯à°÷³s½u¨ì Internet ªº¤è¦¡¡C\n"
-"½Ð±z¿ï¾Ü¨ä¤¤¤@­Ó­n¨Ï¥Îªº¶µ¥Ø¡C\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet ³s½u"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "±z­n¦b¶}¾÷®É¦Û°Ê±Ò°Ê¸Ó³s½u¶Ü¡H"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "ºô¸ô³]©w"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "ºô¸ôªA°È»Ý­n­«·s±Ò°Ê"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"­«·s±Ò°Êºô¸ô®Éµo¥Í¤F¤U­±ªº¿ù»~¡G\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"®¥³ß ! ºô¸ô³]©w²ÕºA¤w¸g³]©w§¹¦¨¤F¡C\n"
-"±zªº¨t²Î¤w¸g¯à°÷¨Ï¥Î¸Ó³]©w¡C\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"¦b§¹¦¨³o­Ó¶µ¥Ø«á¡A«Øij±z­«·s±Ò°Ê±zªº X Àô¹Ò¡A\n"
-"¥HÁקK¦]¬°±z½Õ¾ã¤F¥D¾÷¦WºÙ³y¦¨ X ±Ò°Ê¤Wªº¤@¨Ç°ÝÃD¡C"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ĵ§i: ³o­Ó¸Ë¸m¥ý«e¤w¸g³Q³]©w³Ì¬°³s½u¨ìInternetªº¶µ¥Ø¤F¡C\n"
-"­Y¬O±z­nºû«ù³o­Ó¸Ë¸mªº³]©w¡A½Ð¿ï¾Ü±µ¨ü¡C\n"
-"­Y¬O±z­×§ï¤U­±Äæ¦ì¡A±N·|­â¶V­ì¥»ªº³]©w¡C"
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"½Ð¿é¤J³o¥x¥D¾÷ªº IP ³]©w­È¡A³oÃ䪺¨C­Ó¶µ¥Øªº®æ¦¡\n"
-"³£À³¸Ó¥Î¤p¼ÆÂI¶¡¹jªº¥|­Ó¤Q¶i¦ìªü©Ô§B¼Æ¦r¨Ó¿é¤J \n"
-"(¨Ò¦p 1.2.3.4)¡C"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "¥¿¦b³]©wºô¸ô¸Ë¸m %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ¦ì§}"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "ºô¸ô¾B¸n"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "¦Û°Ê¤À°t IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ¦ì§}¥²¶·­n¥ÎÃþ¦ü 1.2.3.4 ªº®æ¦¡¨Ó¿é¤J"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"½Ð¿é¤J±zªº¥D¾÷¦WºÙ¡A\n"
-"±zªº¥D¾÷¦WºÙÀ³¸Ó¬O¤@­Ó¦X®æªº¥D¾÷¥þ¦W (FQDN)¡A\n"
-"Ãþ¦ü ``mybox.mylab.myco.com'' ªº®æ¦¡¡F°²¦p±z¦³\n"
-"¨Ï¥Î¹h¹D¾¹ªº¸Ü¡A¤]½Ð¦b³oÃä¿é¤J¹h¹D¾¹ªº IP ¦ì§}¡C"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ¦øªA¾¹"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "³q°T¹h (¤ñ¤è %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "¹h¹D¸Ë¸m"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "³]©w­n¨Ï¥Îªº¥N²z¦øªA¾¹"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP ¥N²z¦øªA¾¹"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP ¥N²z¦øªA¾¹"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "¬ö¿ýºô¸ô¥dªº ID (¹ï©óµ§°O«¬¹q¸£¬Û·í¦³¥Î)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "¥N²z¦øªA¾¹ªº³]©w®æ¦¡¥²¶·¬° http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "¥N²z¦øªA¾¹ªº³]©w®æ¦¡¥²¶·¬° ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet ³]©w"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "±z·Q­n¸ÕµÛ³s½u¨ì Internet ¤W­±¶Ü?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "¥¿¦b´ú¸Õºô¸ô³s½u"
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "¨t²Î¥Ø«e¤w¸g³s¤W Internet ¤F¡C"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "¦]¬°¦w¥þ¦]¯À¦Ò¶q¡A²{¦b±N·|¤ÁÂ_³s½u¡C"
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"¨t²Î¥Ø«e¬Ý°_¨Ó¦ü¥G¨Ã¨S¦³³s¤W Internet¡C\n"
-"½Ð­«·s³]©w±zªº³s½u³]©w¡C"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "³s½u²ÕºA"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "½Ð±z¶ñ¤J¨Ã¥BÀˬd¤U­±Äæ¦ì¬ö¿ý"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "¤¶­±¥d IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "¤¶­±¥d mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "¤¶­±¥d IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "¤¶­±¥d IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "¤¶­±¥d IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "±zªº­Ó¤H¹q¸Ü¸¹½X"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "ISP ªº¦WºÙ (ºô¸ô´£¨ÑªÌ¦WºÙ)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "ISP ¹q¸Ü¸¹½X"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "ISP ²Ä¤@¥x dns (¥i¤£¥Î¿é¤J)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "ISP ²Ä¤G¥x dns (¥i¤£¥Î¿é¤J)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "¿ï¾Ü±zªº°ê®a"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "¼·±µªº¼Ò¦¡"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "³s½u³t«×"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "³s½u¹O®É (¥H¬í¬°³æ¦ì)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "µn¤Jªº±b¸¹ (¨Ï¥ÎªÌ¦WºÙ)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "±b¸¹ªº±K½X"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "±¾¸ü¥¢±Ñ¡G"
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "³o­Ó¥­¥x¨Ã¤£¤ä´©©µ¦ù¤À³Î°Ï"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"±zªºµwºÐ¤À³Îªí¤¤¦³µ{¦¡µLªk¨Ï¥ÎªºªÅ¥ÕºÏ°Ï¡A°ß¤@ªº¸Ñ¨M¤èªk¬O\n"
-"±N¥D¤À³Î°Ïªº¦ì¸m·h²¾¡AÅý³o¨ÇªÅ¥ÕºÏ°Ï»P©µ¦ù¤À³Î°Ï¬Û¾F¡C"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "¸Õ¹Ï±qÀÉ®× %s «ì´_®Éµo¥Í¿ù»~¡G %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "¿ù»~ªº³Æ¥÷ÀÉ®×"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "¼g¤JÀÉ®× %s ®Éµo¥Í¿ù»~"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"±zªºµwºÐµo¥Í¤F¤@­ÓÄY­«ªº¿ù»~¡C\n"
-"µwºÐŪ¨ú¼g¤JÀË´ú¥¢±Ñ¤F....\n"
-"³o·N¨ýµÛ±zªºµwºÐ¦³¹êÅ骺·´·l°ÝÃD¡A¥ô¦ó¸ê®Æªº¼g¤J\n"
-"¥i¯à³£·|µo¥Í¿ù»~¡C"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "¥²³Æªº"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "­«­nªº"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "·¥¦nªº"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "¦n¥Îªº"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "¥i¥H¤@¸Õ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "¥»¾÷¦Lªí¾÷"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "»·ºÝ¦Lªí¾÷"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "»·ºÝªº CUPS ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "»·ºÝªº lpd ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "ºô¸ô¦Lªí¾÷ (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Netware ¦øªA¾¹¦Lªí¾÷"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "¿é¤J¦Lªí¾÷©Ò¦b URI ¦ì§}"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "¨Ï¥Î Pipe ºÞ½u¤è¦¡²Õ¦¨¦C¦L¤u§@"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "¥¼ª¾ªº«¬¸¹"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "¥»¾÷¦Lªí¾÷"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "»·ºÝ¦Lªí¾÷"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr "©ó¨Ã¦C°ð¤W \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr "¡AUSB ¦Lªí¾÷  \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr "¡A¦ì©ó¨Ã¦C°ð¦h¥\¯à¸Ë¸m \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr "¡A¦ì©ó USB ªº¦h¥\¯à¸Ë¸m"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr "HP JetDirect ¤Wªº¦h¥\¯à¸Ë¸m"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr "¡A¦h¥\¯à¸Ë¸m"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr "¡A¦C¦L¦Ü %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "¦ì©ó LPD ¥D¾÷ \"%s\"¡A¦Lªí¾÷ \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr "¡ATCP/IP ¥D¾÷ \"%s\"¡A³sµ²°ð %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "¦ì©ó Windows ¥D¾÷ \"%s\"¡A¤À¨É¦WºÙ \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "¦ì©ó Novell ¥D¾÷ \"%s\"¡A¦Lªí¾÷ \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr "¡A¨Ï¥Î©R¥O %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raw ¦Lªí¾÷ (µLÅX°Êµ{¦¡)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(©ó %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(¦ì©ó³o­Ó¾÷¾¹¤W)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "¦ì©ó CUPS ¦øªA¾¹ \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (¹w³]¶}¾÷)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "¿ï¾Ü¦Lªí¾÷³s½u"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "¦Lªí¾÷ªº³s½u¤è¦¡¬°¦ó?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"±zªº Printer ¦ì©ó CUPS ªA°È¥D¾÷¤W¡A©Ò¥H±z³oÃä¨Ã¤£»Ý­n³]©w¡F\n"
-"³o¨Ç¦Lªí¾÷±N¯à°÷¦Û°Ê°»´ú¨ì¡C"
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS ²ÕºA"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "«ü©w CUPS ¦øªA¾¹"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"­Y¬O±z­n¨Ï¥Î»·ºÝªº¡uCUPS ¦øªA¾¹¡vªº¦Lªí¾÷¡A¤@¯ë¨Ó»¡\n"
-"±z¤£»Ý­n¶i¦æÃB¥~³]©w¡A¦]¬°¡uCUPS ¦øªA¾¹¡v¯à°÷¦Û°Ê\n"
-"°e¥X¬ÛÃö²ÕºA¸ê°TÅý¥Î¤áºÝ¹q¸£ª½±µ¨Ï¥Î¡C±z¥D¾÷¥Ø«e¤wª¾\n"
-"¥i¥Îªº¦Lªí¾÷¶µ¥Ø¡A³£¦ì©ó¤U­±ªº¡u»·ºÝ¦Lªí¾÷¡v¶µ¥Ø¤º¡C\n"
-"­Y¬O§A­n¨Ï¥Îªº¡uCUPS ¦øªA¾¹¡v¨Ã¤£¬O¦ì©ó°Ï°ìºô¸ô¤º¡A\n"
-"¨º±z»Ý­n«ü©w¸Ó¥D¾÷ªº IP ¦ì§}¡A¥i¯à»Ý­n¥]§t«ü©w³s±µ°ð¡C"
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"¤@¯ë¨Ó»¡¡ACUPS ¯à°÷«Ü¦Û°Êªº¨Ì¾Ú±zªººô¸ôÀô¹Ò¶i¦æ³]©wªº°Ê§@¡A\n"
-"¦]¦¹±z¥i¥H«Ü§Ö³t¤è«Kªº¨Ó¨Ï¥Î°Ï°ìºô¸ô¤ºªº CUPS ¦Lªí¾÷¦øªA¾¹¡C\n"
-"­Y¬O³o­Ó¶µ¥Ø¨Ã¨S¦³¥¿½T¤u§@¡A±z¥i¥H§â¡yCPUS ¦Û°Ê¤Æ³]©w¡zªº\n"
-"¶µ¥ØÃö³¬¡AµM«á¤â°Ê½s¿è¡u/etc/cups/cupsd.conf¡vÀɮפº®e¡A\n"
-"µM«á¨Ï¥Î¤U¦Cªº©R¥O­«·s±Ò°ÊCUPSªA°È¥H«K©óÅýÅܧó¥Í®Ä¡C\n"
-"\n"
-"(©R¥O: service cups restart)"
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ¦ì§}À³¸Óªø±o¹³¬O 1.2.3.4 ªº®æ¦¡"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Port Äæ¦ìÀ³¸Ó¬°¼Æ¦r"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS ¦øªA¾¹ IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "³s±µ°ð"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CPUS ¦Û°Ê¤Æ³]©w"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "¥¿¦b°»´ú¸Ë¸m ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "´ú¸Õ³s±µ°ð"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "·s¼W¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Åwªï¨Ó¨ì¦Lªí¾÷³]©wºëÆF\n"
-"\n"
-"³]©wºëÆF±N·|±a»â±z§¹¦¨¥»¦aºÝ¥H¤Î»·ºÝ¦Lªí¾÷ªº³]©w¡C\n"
-"\n"
-"³]©w¹Lµ{¤¤¡A½Ð¨Ì´£¥Ü¿ï¾Ü¬ÛÃö¶µ¥Ø¡A¥]§t¦Lªí¾÷ºØÃþ¡B\n"
-"ÃB¥~°Ñ¼Æµ¥¡C"
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "¥»¾÷¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Åwªï¨Ó¨ì¦Lªí¾÷³]©wºëÆF\n"
-"\n"
-"³]©wºëÆF±N·|±a»â±z§¹¦¨¦Lªí¾÷ªº¦w¸Ë¡C\n"
-"\n"
-"¶i¦æ¤U­±°Ê§@«e¡A½Ð½T»{±z¤w¸g¶}±Ò¦Lªí¾÷¹q·½¡AµM«á¿ï¾Ü¡y¤U¤@¨B¡z\n"
-"Ä~Äò¡A©ÎªÌ¬O¿ï¾Ü¡y¨ú®ø¡z©ñ±ó³]©w¡C\n"
-"\n"
-"¥Ñ©ó¦b¬Y¨Ç¾÷¾¹¤W¨Ï¥Î¦Û°Ê°»´ú¥\¯à®É¡A±N·|Åý¨t²Î·í¾÷¥¢¥h¦^À³¡A\n"
-"©Ò¥H³o®É­Ô³Ì¦n¬O¿ï¾ÜÃö³¬¡y¦Û°Ê°»´ú¦Lªí¾÷¡z¶µ¥Ø¡C¥t¥~¡A±z¥i¥H\n"
-"¿ï¾Ü¡y±M®a¼Ò¦¡¡z¶µ¥Ø¡A¯à°÷Åý¨Ï¥ÎªÌ¨Ï¥Î¤â°Êªº¤è¦¡¿ï¾Ü¬ÛÃö¶µ¥Ø¡C"
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "¦Û°Ê°»´ú¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"®¥³ß¡I¦Lªí¾÷³]©w¤w¸g§¹¦¨¡C\n"
-"\n"
-"­Y¬O±z¨Æ«á»Ý­n·s¼W¡B§R°£¡B­«·s©R¦W¬ÛÃö¦Lªí¾÷µ¥³]©wªº¸Ü¡A\n"
-"½Ð¦b Mandrake ±±¨î¥x¤º¿ï¾Ü¡yµwÅé¡z¦A¿ï¾Ü¡y¦Lªí¾÷¡z¶µ¥Ø\n"
-"§Y¥i¶i¦æ³]©w°Ê§@¡C"
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "¦Lªí¾÷¦Û°Ê°»´ú"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"PrinterDrake ¯à°÷¦Û°Ê°»´ú¨t²Î¤Wªº¨Ã¦C°ð©ÎªÌ¬OUSB¤Wªº¦Lªí¾÷¡A\n"
-"¤£¹L¦Û°Ê°»´ú¥i¯à·|Åý±zªº¨t²Î¥¢¥h¦^À³¡A¬Æ¦Ü·´ÃaÀɮרt²Î¡C\n"
-"­Y¬O±z­n¨Ï¥Î¸Ó¶µ¥Ø¡A½Ð¦h¥[¤p¤ß!!\n"
-"\n"
-"¤@¯ë¨Ó»¡¡A¥»¦aºÝ¦Lªí¾÷´N¦w¸Ë¦b±z¹q¸£ªþªñ¡A±z¥i¥H²³æ¬d¬Ý\n"
-"¸Ó¦Lªí¾÷ªº«¬¸¹¡A¤£¤@©w±o¨Ï¥Î¦Û°Ê°»´úªº¥\¯à¡C¦]¦¹¡A±z½T©w\n"
-"­n¨Ï¥Î¦Û°Ê°»´úªº¥\¯à¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "¨Ï¥Î¦Û°Ê°»´ú"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "¤â°Ê³]©w¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "°»´ú¨ì %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "¦Lªí¾÷¦ì©ó¨Ã¦C°ð \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB ¦Lªí¾÷ \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"µLªk§ä¨ì¥»¦aºÝ¦Lªí¾÷! ½Ð¤â°Ê«ü©w¦Lªí¾÷ªº©Ò¦b¸Ë¸m¦WºÙ¡C\n"
-"(¨Ã¦C°ð¡G/dev/lp0¡A/dev/lp1¡A... ¬Û·í©ó LPT1:¡ALPT2:...¡A\n"
-"²Ä¤@¥x USB ¦Lªí¾÷¬O¡G/dev/usb/lp0¡A²Ä¤G¥x¡G/dev/usb/lp1)¡C"
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "±z»Ý­n¿ï¾Ü©Î¿é¤J¸Ó¦Lªí¾÷¦WºÙ©Î¸Ë¸m¶µ¥Ø!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"§ä¤£¨ì¥»¦aºÝ¦Lªí¾÷¡I\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"ºô¸ô¦Lªí¾÷³]©w¡A»Ý­n¦b¦w¸Ë«á¤~¯à°÷¶i¦æ¡C¨Æ«á±z¥i¥H³z¹L\n"
-"Mandrake ±±¨î¤¤¤ß¤ºªº\"µwÅé\"¶µ¥Ø¤ºªº¡y¦Lªí¾÷¡z¨Ó³]©w¡C"
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"­Y¬O­n¦w¸Ëºô¸ô¦Lªí¾÷¡A½ÐÂI¿ï¡y¨ú®ø¡z¡AµM«á¥t¥~\n"
-"¿ï¾Ü¦³¡y±M®a¼Ò¦¡¡z¡A¦AÂI¿ï¡y·s¼W¦Lªí¾÷¡z§Y¥i¡C"
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"¤U­±©Ò¦C¥Xªº¬O¨Ï¥Î¦Û°Ê°»´ú©Ò§ä¨ìªº¦Lªí¾÷¡C­Y¬O§ä¨ìªº¶µ¥Ø\n"
-"¨Ã¤£¬O§A©Ò¹w´Áªº¡A¨º½Ð¤â°Ê¿é¤J¸Ë¸m¦WºÙ/ÀɮצWºÙ"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"¤U­±©Ò¦C¥Xªº¬O¨Ï¥Î¦Û°Ê°»´ú©Ò§ä¨ìªº¦Lªí¾÷¡C½Ð¿ï¾Ü±z­n³]©wªº\n"
-"¦Lªí¾÷¶µ¥Ø¡A©ÎªÌ¬O¤â°Ê¿é¤J¸Ë¸m¦WºÙ/ÀɮצWºÙ"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"¤U­±¦C¥Xªº¬O¦Û°Ê°»´ú©Ò§ä¨ìªº¦Lªí¾÷¡C¬ÛÃö¦Lªí¾÷ªº²ÕºA³]©w\n"
-"³£¯à°÷¦Û°Ê§¹¦¨¦Ó¤£»Ý­n¥t¥~³]©w¡C­Y¬O¤U­±¦C¥X©Ò§ä¨ìªº¦Lªí¾÷\n"
-"¨Ã¤£¬O±z©Ò¹w´Áªº¡A©ÎªÌ¬O§A§Æ±æ¤â°Ê¤è¦¡³]©w¡A½Ð¿ï¾Ü¡y¤â°Ê³]©w¡z¡C"
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr "½Ð¿ï¾Ü±z¦Lªí¾÷ªº³sµ²°ð¡A©ÎªÌ¬O¿é¤J¸Ó¸Ë¸mªº¦WºÙ"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "½Ð¿ï¨ú¦Lªí¾÷©Ò³s±µªº³s±µ°ð¡C"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (¨Ã¦C°ð¡G/dev/lp0¡A/dev/lp1¡A...... ¬Û·í©ó LPT1:¡ALPT2:....\n"
-"²Ä¤@¥x USB ¦Lªí¾÷¬O¡G/dev/usb/lp0¡A²Ä¤G¥x¡G/dev/usb/lp1)¡C"
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "±z»Ý­n¿ï¾Ü©Î¿é¤J¸Ó¦Lªí¾÷¦WºÙ©Î¸Ë¸m¶µ¥Ø!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "¤â°Ê²ÕºA³]©w"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"±zªº¦Lªí¾÷¬OÄÝ©ó HP (OfficeJet, PSC, PhotoSmart, LaserJet\n"
-"1100/1200/1220/3200/3300 ·f°t±½´y¾¹) ªº¦h¥\¯à¸Ë¸m¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "¥¿¦b¦w¸Ë HPOJ ®M¥ó..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "¥¿¦bÀˬd¸Ë¸m¶µ¥Ø¨Ã¥B³]©w HPOJ"
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "¥¿¦b¦w¸Ë SANE ®M¥ó..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "¥¿¦b HP ±½´y¦h¥\¯à¸Ë¸m"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "¥¿¦b³]©w¦Lªí¾÷³sµ²°ðÅý CUPS ¦s¨ú¨Ï¥Î..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "¥¿¦bŪ¨ú¦Lªí¾÷¸ê®Æ ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "»·ºÝ lpd ¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"¦p­n¨Ï¥Î»·ºÝªº lpd ¦Lªí¾÷¡A±z¥²¶·­n«ü©w¥Î¨Ó´£¨Ñ\n"
-"¦LªíªA°Èªº»·ºÝ¦C¦L¦øªA¥D¾÷¦WºÙ¡A¥H¤Î¤À¨É¥X¨Ó\n"
-"¦Lªí¾÷¦WºÙ¡C"
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "»·ºÝ¥D¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "»·ºÝ¦Lªí¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "¨S«ü©w»·ºÝ¥D¾÷¦WºÙ !"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "¨S«ü©w¦Lªí¾÷¦WºÙ !"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ºô¸ôªÚ¾F (SMB, Windows 9x/NT) ¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"¦p­n¨Ï¥Îºô¸ôªÚ¾F¦Lªí¾÷¡A±z¥²¶·­n´£¨Ñ¥D¾÷ºôªÚ¦WºÙ \n"
-"(ª`·N! ³o­Ó¦WºÙ»P TCP/IP ªº¥D¾÷¦WºÙ¥i¯à¨Ã¤£¬Û¦P)¡A\n"
-"¦³®ÉÁÙ¥²¶·«ü©w¦C¦L¦øªA¾¹ªº IP ¦ì§}¡B¤À¨É¥X¨Óªº¦Lªí\n"
-"¾÷¦WºÙ¡B¾A·íªº¨Ï¥ÎªÌ±b¸¹»P±K½X¡A¥H¤Î¤u§@¸s²Õªº¸ê°T¡C"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "ºôªÚ¥D¾÷¦WºÙ¡¨"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "ºôªÚ¥D¾÷ IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "¦Lªí¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "¤u§@¸s²Õ"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "¦øªA¾¹ªº¥D¾÷¦WºÙ©ÎªÌ¬O IP ¥²¶·«ü©w"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba ¤À¨Éªº¦WºÙ¨S«ü©w !"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare ¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"¦p­n¨Ï¥Î NetWare ¦Lªí¾÷¡A±z¥²¶·­n´£¨Ñ NetWare\n"
-"¦C¦L¦øªA¾¹ªº¥D¾÷¦WºÙ (ª`·N! ³o­Ó¦WºÙ»P TCP/IP \n"
-"ªº¥D¾÷¦WºÙ¥i¯à¨Ã¤£¬Û¦P)¡AÁÙ­n¦³¤À¨É¥X¨Óªº¦C¦L\n"
-"¦î¦C¦WºÙ¡A¥H¤Î¾A·íªº¨Ï¥ÎªÌ±b¸¹»P±K½X¡C"
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "¦C¦L¦øªA¾¹¦WºÙ"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "¦C¦L¦î¦C¦WºÙ"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP ¦øªA¾¹¦WºÙ¨S«ü©w!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP ¦C¦L¦î¦C¦WºÙ¦WºÙ¨S«ü©w"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket ¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"­n³z¹L socket ³oÃþ«¬ªº¦Lªí¾÷¶i¦æ¦C¦L¡A±z»Ý­n´£¨Ñ\n"
-"¸Ó¦Lªí¾÷ªº¥D¾÷¦WºÙ¡A¦P®É¤]¥i¯à»Ý­n¿ï¾Ü©Ê¿é¤J©Ò\n"
-"¦bPort ªº¦ì§}¡C¦b¤j³¡¤Àªº HP JetDirect ¦Lªí¾÷¦øªA\n"
-"¥D¾÷©Ò¨Ï¥ÎªºPort¦h¥b¬°9100¡A¨ä¾lÃþ«¬ªº¦Lªí¾÷´N\n"
-"¤£¤@©w¬°³o­Ó¼Æ­È¡C«Øij±z¥ý¾\Ū¦Lªí¾÷©Ò´£¨Ñªº¤â\n"
-"¥U¡A´M§ä¥X§A¥Ø«e¨Ï¥Î³o´Ú¦Lªí¾÷ªº¬ÛÃöµwÅé¸ê°T¡C"
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "¦Lªí¾÷¥D¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "¨S«ü©w¦Lªí¾÷¥D¾÷¦WºÙ !"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "¦Lªí¸Ë¸mªº URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"±z¥i¥Hª½±µ¨Ï¥Î URI ªº¤è¦¡¦s¨ú¸Ó¦Lªí¾÷¡CURI ¥²¶·§¹¾ã¿é¤J\n"
-"CUPS¦øªA¾¹©Ò¦b¦ì§}¡A©ÎªÌ¬O¥Î Foomatic ³W®æ¤è¦¡¿é¤J¡C\n"
-"½Ðª`·N¡A¨Ã¤£¬O©Ò¦³ªº URI Ãþ«¬³£¯à°÷³Q©Ò¦³ªº spooler ¤ä´©¡C"
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "¥²¶·¿é¤J§¹¾ãªº URI ¦ì§}"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"¨C¤@­Ó¦Lªí¾÷³£»Ý­n«ü©w¤@­Ó¦WºÙ (¤ñ¤è¹³¬O printer)¡C\n"
-"¦Ü©ó´y­z»P¦ì¸mÄæ¦ì¥i¥H¤£¥²¶ñ¤J¡A¦]¬°³o¨ÇÄæ¦ì¬Oµù¸Ñ¡C"
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "¦Lªí¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "´y­z"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "¦ì¸m"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "¥¿¦b·Ç³Æ¦Lªí¾÷¸ê®Æ"
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "±zªº¦Lªí¾÷«¬¸¹"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "¸Ó«¬¸¹¥¿½T"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "¤â°Ê¿ï¾Ü«¬¸¹"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "¦Lªí¾÷«¬¸¹¿ï¾Ü"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "±zªº¦Lªí¾÷Äݩ󨺺ث¬¸¹¡H"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"½ÐÀ˵ø PrinterDrake µ{¦¡©Ò¦Û°Ê°»´ú¨ìªº\n"
-"¦Lªí¾÷«¬¸¹¬O§_¥¿½T¡C±z¤]¥i¥H´M§äÀ˵ø\n"
-"¤U­±ªº¦Lªí¾÷²M³æ¡C"
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr "¦pªG¸Ó¦Lªí¾÷¨Ã¥¼¦C¥X¡A½Ð¿ï¾Ü¬Û®e©ÎªÌ¬O¬Û«Hªº¦Lªí¾÷«¬¸¹¡C"
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI Windows ¦Lªí¾÷³]©w"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"±z¥Ø«e¬O³]©w¨Ï¥Î OKI ¹p®g¦Lªí¾÷¶µ¥Ø¡C³oÃþªº¦Lªí¾÷\n"
-"¨Ï¥Î¤@ºØ«Ü¯S®íªº¶Ç¿é·¾³q¨ó©w¡A¦]¦¹³oÃþ¦Lªí¾÷¤@©w­n\n"
-"¦w¸Ë¦b¹q¸£²Ä¤@­Ó³sµ²°ð¦ì¸m¤W¤~¯à°÷¥¿±`¤u§@¡C\n"
-"©Ò¥H²{¦b½Ð±z¥ý½T©w±z¥Ø«eªº¦Lªí¾÷¤w¸g¥¿½T¦a¦w¸m¦b\n"
-"²Ä¤@­Ó³sµ²°ð¤W¡A¥H«K©ó¤~¯à°÷¥¿¦b¦C¦L´ú¸Õ­¶¤º®e¡C\n"
-"§_«h¦C¦L¥\¯à±N·|µLªk¥¿±`¤u§@¡C"
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark ¼Q¾¥¦Lªí¾÷³]©w"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark ©Ò´£¨Ñªº¼Q¾¥¦Lªí¾÷ÅX°Êµ{¦¡¥u¦³¤ä´©¥»¾÷¦Lªí¾÷\n"
-"ªº¦C¦Lªº¥\¯à¡A±NµLªk¨Ï¥Î³oÃþ»·ºÝ¦Lªí¾÷¡C½Ð½T»{±z¥Ø«e\n"
-"¦Lªí¾÷¤w¸g¥¿½T³sµ²¨ì±z¥»¦aºÝ¹q¸£¤W¡A³]©w¸Ó¦Lªí¾÷ªº\n"
-"³sµ²¦ì¸m¡C"
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"­Y¬O§Æ±æ¯à°÷¨Ï¥Î³o¥x Lexmark ¼Q¾¥¦Lªí¾÷¶i¦æ¦C¦Lªº¸Ü\n"
-"±z»Ý­n¥Ñ Lexmark ºô¯¸ (http://www.lexmark.com) ­º­¶¤W\n"
-"´M§ä¬ÛÃö³sµ²¡A¤U¸ü³o¥x¦Lªí¾÷ªºÅX°Êµ{¦¡¡C¤ñ¤è·í±z³s¤W\n"
-"Lexmark ºô¯¸­º­¶«á¡A½ÐÂI¿ï \"Drivers\" «ö¶s¡A¿ï¾Ü±z\n"
-"¥Ø«e¨Ï¥Î¸Ó´Ú¦Lªí¾÷«¬¸¹¡A¨Ã½T»{¬O¿ï¨ú¨Ï¥Î \"Linux\"ªº\n"
-"ª©¥»¡C¤@¯ë¨Ó»¡¡A±z¤U¸ü¦^¨ÓªºÀɮסA¥i¯à¬O RPM ®M¥óÀÉ®×\n"
-"©ÎªÌ¬O´X­Ó shell script (°õ¦æ¸ÓÀÉ®×±N·|±Ò°Ê¦w¸Ëµ{¦¡)¡C\n"
-"¤@¯ë¨Ó»¡¡A±z¨Ã¤£»Ý­n³z¹L¹Ï¦æ¤Æªº«eºÝ¤¶­±¨Ó¶i¦æ¬ÛÃöªº\n"
-"ªº³]©w¡CµM«á¨Ï¥Î \"lexmarkmaintain\" µ{¦¡¶µ¥Ø¨Ó¦C¦L¼QÀY\n"
-"®Õ¥¿ªº¤u§@³]©w¡C"
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"¹w³]¦Lªí¾÷³]©w\n"
-"\n"
-"±z»Ý­n½T©w¯È±iªº¤j¤p»P¾¥¤ôªººØÃþ³]©w³£¥¿½TµL»~¡C\n"
-"½Ðª`·N¤@¤U¡A·í¨Ï¥Î°ª«~½è¦C¦L®É©Òªá¶Oªº®É¶¡·|¶V¤[¡C"
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s °Ñ¼Æ»Ý­n¬°¾ã¼Æ !"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s °Ñ¼Æ»Ý­n¬°¾ã¼Æ"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s °Ñ¼Æ¶W¥X¤¹³\½d³ò"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "±z­n¨Ï¥Î³o¥x¦Lªí¾÷ (\"%s\") ¬°¹w³]¦Lªí¾÷¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"±z¿ï¨ú§A­n¦C¦Lªº´ú¸Õ­¶¡C\n"
-"ª`·N: ¹Ï§Î´ú¸Õ­¶·|ªá¶O¤ñ¸û¤[ªº®É¶¡¨Ó¦C¦L¡A\n"
-"­Y¬O¸Ó¦Lªí¾÷µwÅé¥i¥Î°O¾ÐÅé«Ü¤Öªº¸Ü¡A¦C¦L®É¶¡\n"
-"¯à°÷·|»Ý­nªá¶O§ó¤[®É¶¡¡C\n"
-"¤@¯ë±¡ªp¨Ó»¡¡A¿ï¾Ü¼Ð·Çªº´ú¸Õ­¶´N«Ü¨¬°÷¤F¡C"
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "¤£¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "¦C¦L"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "¼Ð·Ç¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Letter ¯È±i¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "A4 ¯È±i¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "¹Ï§Î¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "¤£­n¦C¦L´ú¸Õ­¶"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "¥¿¦b¦C¦L´ú¸Õ­¶..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"´ú¸Õ­¶¤w¸g³Q°e¨ì¦C¦L¦øªAµ{¦¡¤F¡A±µµÛ¥i¯à»Ý­nªá\n"
-"¤@ÂI®É¶¡¡A¦Lªí¾÷¤~·|§âµ²ªG¦L¥X¨Ó¡C\n"
-"¥Ø«eªº¦C¦Lª¬ºA:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"´ú¸Õ­¶¤w¸g³Q°e¨ì¦C¦L¦øªAµ{¦¡¤F¡A±µµÛ¥i¯à»Ý­nªá\n"
-"¤@ÂI®É¶¡¡A¦Lªí¾÷¤~·|§âµ²ªG¦L¥X¨Ó¡C\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "¦C¦L¥¿±`¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Raw ¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"­n¦b²×ºÝ¾÷©R¥O¦CÀô¹Ò¦C¦LÀɮתº¸Ü¡A±z¥i¥H°õ¦æ³o­Ó«ü¥O: \n"
-"\"%s <ÀɮצWºÙ>\"\n"
-"©ÎªÌ¬O¨Ï¥Î¹Ï«¬¤¶­±µ{¦¡:\n"
-"\"xpp <ÀɮצWºÙ>\"\n"
-"©ÎªÌ¬O\n"
-"\"kprinter <ÀɮצWºÙ>\"\n"
-"§Y¥i¡C±z¥i¥H³z¹L¹Ï«¬¤¶­±µ{¦¡Â²³æªº¿ï¾Ü¦Lªí¾÷¶µ¥Ø¡A\n"
-"¥]§t­×§ï¬ÛÃöªº¦C¦L¿ï¶µ¡C\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"³o­Ó«ü¥O¥\¯à¡A¨ä¹ê±z¤]¥i¥H¦b³\¦hÀ³¥Îµ{¦¡¦C¦L¹ï¸Ü¤è¶ôªº \"¦C¦L©R¥O\" ¨Ï¥Î"
-"¥¦¡C\n"
-"¦ý¬O³oÃ䤣´£¨Ñ©Ò¿×ªºÀɮצWºÙ¡A¦]¬°¬ÛÃöÀɮתº¦C¦L¥\¯à¬O¥Ñ¬ÛÃöÀ³¥Îµ{¦¡´£¨Ñ¡C\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"¡u%s¡v«ü¥O¡A¯à°÷Åý±z­×§ï¬Y­Ó³]©w¦C¦L¤u§@¶µ¥Øªº°Ñ¼Æ³]©w¡C\n"
-"²³æ¤@ÂIªº¤è¦¡´N¬O¦b©R¥O¦C¥[¤W±z­n¶ñ¤Jªº³]©w­È¡A¤ñ¤è¡u%s <ÀÉ®×>¡v¡C "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"­nÀò±o¥Ø«e³o¥x¦Lªí¾÷¥i¥Îªº¬ÛÃö°Ñ¼Æ¿ï¶µ¡A©ÎªÌ¬O¬d¬Ý¤U­±²M³æ\n"
-"©ÒÅã¥Üªº¶µ¥Ø¡A½ÐÂI¿ïÂI¿ï¡y¦C¦L¿ï¶µ²M³æ¡z«ö¶s¡C%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"¤U­±¥]§t¤F¥Ø«e¦Lªí¾÷¤ä´©ªº¿ï¶µ²M³æ:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"­n¦b²×ºÝ¾÷©R¥O¦CÀô¹Ò¦C¦LÀɮתº¸Ü¡A±z¥i¥H°õ¦æ³o­Ó«ü¥O:\n"
-"\"%s <ÀÉ®×>\"¡C\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"³o­Ó«ü¥O¥\¯à¡A¨ä¹ê±z¤]¥i¥H¦b³\¦hÀ³¥Îµ{¦¡¦C¦L¹ï¸Ü¤è¶ôªº\n"
-"¡y¦C¦L©R¥O¡z¨Ï¥Î¥¦¡C\n"
-"¦ý¬O³oÃ䤣´£¨Ñ©Ò¿×ªºÀɮצWºÙ¡A¦]¬°¬ÛÃöÀɮתº¦C¦L¥\¯à¬O¥Ñ\n"
-"¬ÛÃöÀ³¥Îµ{¦¡´£¨Ñ¡C\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr "­nÀò±o¥Ø«e³o¥x¦Lªí¾÷¥i¥Îªº¬ÛÃö°Ñ¼Æ¿ï¶µ¡A½ÐÂI¿ï¡y¦C¦L¿ï¶µ²M³æ¡z«ö¶s¡C"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"­n¦b²×ºÝ¾÷©R¥O¦CÀô¹Ò¦C¦LÀɮתº¸Ü¡A±z¥i¥H°õ¦æ³o­Ó«ü¥O: \"%s <ÀÉ®×>\" ©ÎªÌ¬O "
-"\"%s <ÀÉ®×>\"¡C\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"±z¤]¥i¥H¨Ï¥Î¹Ï§Î¤¶­±ºÞ²zµ{¦¡ - \"xpdq\" ¨Ó³]©w°Ñ¼Æ³]©w¡A\n"
-"¥]§t­n¦C¦Lªº¤u§@¶µ¥Ø¡C\n"
-"¦pªG±z¥Ø«e¬O¨Ï¥Î KDE ®à­±Àô¹Òªº¸Ü¡A¦b®à­±ªº¤u§@¦C¤W¡A\n"
-"±zÀ³¸Ó¥i¥H§ä¨ì¤@­Ó©R¦W¬° \"°±¤î¦Lªí¾÷!\" ªº¶µ¥Ø¡C·í±z\n"
-"ÂI¿ï¸Ó¶µ¥Ø«á¡A¥Ø«e¥¿¦b¦C¦Lªº¤u§@³£·|¥ß§Y¼È°±¡C\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" »P \"%s\" «ü¥O¡A¯à°÷Åý±z­×§ï¬Y­Ó³]©w¦C¦L¤u§@¶µ¥Ø\n"
-"ªº°Ñ¼Æ³]©w¡C²³æ¤@ÂIªº¤è¦¡´N¬O¦b©R¥O¦C¥[¤W±z­n¶ñ¤Jªº³]©w­È¡A\n"
-"¤ñ¤è \"%s <ÀÉ®×>\"¡C\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Ãö³¬"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "©ó¡u%s¡v ¦C¦L/±½´y"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "¨Ï¥Î¡u%s¡v¦Lªí¾÷¶i¦æ¦C¦L"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "¦C¦L¿ï¶µ²M³æ"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Ū¨ú¦Lªí¾÷¸ê®Æ ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "¦Lªí¾÷¶Ç°e³]©w"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"­Y¬O±z¤w¸g³]©w¹L %s spooler ¦Lªí¾÷¶µ¥Øªº¸Ü¡A±z¥i¥H«Ü²³æ\n"
-"±N²ÕºA³]©w¤º®e®M¥Îµ¹ %s ¶µ¥Ø¡C¯à°÷®M¥Îªº²ÕºA¶µ¥Ø¡A¥]§t¹³¬O\n"
-"¦Lªí¾÷ªº¦WºÙ¡B´y­z¸ê°T¡B¦ì¸m¡B³s½uÃþ«¬¡B¹w³]°Ñ¼Æµ¥µ¥¶µ¥Ø¡A\n"
-"¤£¹L¤£¥]§t¶Ç°e­n¦C¦Lªº¤u§@¶µ¥Ø¥\¯à¡C\n"
-"¥t¥~¨Ã¤£¬O©Ò¦³ªº¦C¦L¤u§@³£¯à°÷³Q¶Ç¿é¹L¨Ó¡A¦]¬°¤U­±­ì¦]¡G\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ¥Ø«e¨Ã¤£¤ä´©¦ì©óNovell¥D¾÷¤Wªº¦Lªí¾÷¡A¥]§t¤£¨Ï¥Îfree-formed\n"
-"©R¥O¶Ç°e¦C¦L¸ê®Æªº¦Lªí¾÷¡C\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ¶È¤ä´©¥»¦aºÝ¦Lªí¾÷¡A©ÎªÌ¬O»·ºÝ LPD ªº¦Lªí¾÷¡A¥H¤Î\n"
-"TCP/Socket ¦Lªí¾÷Ãþ«¬¡C\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "PD »P LPRng ¤£¤ä´© IPP Ãþ«¬ªº¦Lªí¾÷¡C\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"°£¦¹¤§¥~¡Aqueues µLªk³z¹L¸Óµ{¦¡«Ø¥ß¡A©ÎªÌ¬O \"foomatic-configure\"\n"
-"µLªk¶i¦æ¶Ç¿é¡C"
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"¦Lªí¾÷À³¸Ó¤w¸g³z¹L¼t°Ó©Ò´£¨Ñªº PPD Àɮפº®e³]©w¦n¤F¡C©ÎªÌ¬O\n"
-"­ì¥Í©Êªº CUPS ÅX°Êµ{¦¡µLªk³Q¶i¦æÂà´«°Ê§@¡C"
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"½ÐÂI¿ï¼Ð°O±z­n¶Ç°eªº¦Lªí¾÷¶µ¥Ø¡AµM«áÂI¿ï \"¶Ç°e\" §Y¥i¡C"
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "¤£¶Ç°e¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "¶Ç°e"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"¦b %s ¤w¸g¦s¦b¤F¤@­Ó¦WºÙ¬° %s ªº¦Lªí¾÷¦WºÙ¡C\n"
-"½ÐÂI¿ï¡y¶Ç°e¡zÂл\¤º®e¡C\n"
-"±z¤]¥i¥H¥t¥~¿é¤J¤@­Ó¦WºÙ¡A©ÎªÌ¬O²¤¹L³o¥x¦Lªí¾÷¡C"
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "¦Lªí¾÷ªº¦WºÙÀ³¸Ó¥u¦³¥]§t­^¤å¦r¥À¡B¼Æ¦r»P©³½u³oÃþ¦r¤¸"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"³o¥x \"%s\" ¦Lªí¾÷¤w¸g¦s¦b¤F¡A\n"
-"±z½T©w­nÂл\³o¥x¦Lªí¾÷ªº²ÕºA³]©w¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "·s¦Lªí¾÷¦WºÙ"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "¥¿¦b¶Ç°e %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "¥¿¦b§ó·s¦Lªí¾÷¸ê®Æ ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "³]©w»·ºÝ¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "±Ò°Êºô¸ô¤¤ ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "¥ß§Y³]©wºô¸ô"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "¥Ø«eºô¸ô¥\¯à©|¥¼³]©w"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"±z¥Ø«e­n¶}©l³]©w»·ºÝ¦Lªí¾÷¦C¦Lªº¶µ¥Ø¡C­n¶i¦æ¦¹¶µ¥Ø³]©wªº«e´£¡A\n"
-"±zªº¨t²Î»Ý­n¨ã³Æºô¸ô¥\¯à¥H«K©ó¶i¦æ¦s¨ú°Ê§@¡A¦ý¬O¥Ø«eºô¸ô©|¥¼\n"
-"³]©w¡C¦pªG±z¥´ºâ²¤¹Lºô¸ô³]©w¶µ¥ØÄ~Äò¶i¦æ¤U­±ªº¨BÆJªº¸Ü¡AÃö©ó\n"
-"³]©w¨Ï¥Î»·ºÝ¦Lªí¾÷¥\¯àªº¶µ¥Ø±NµLªk³]©w¡C±z¥´ºâ­n«ç»ò§@©O¡H"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "²¤¹Lºô¸ô³]©w¶µ¥ØÄ~Äò¶i¦æ¤U­±ªº¨BÆJ"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"¦b¨t²Î¾ã­Ó¦w¸Ë¹Lµ{¤¤¡A¨t²Îªººô¸ôªA°È¨Ã¥¼±Ò°Ê¡C«Øij±z¥i¥H¦b\n"
-"¾ã­Ó¦w¸Ë§¹¦¨¡A­«·s¶}¾÷¶i¤J¨t²Î«á¡A³z¹L Mandrake ±±¨î¥xµ{¦¡\n"
-"¿ï¾Ü¡yºô¸ô¡z¡y³s½u¡z¶µ¥Ø¶i¦æ³]©w¡C¦¹¥~¡A«áÄò¹³¬O¦Lªí¾÷\n"
-"ªº³]©w¡A±z¤]¥i¥H³z¹L Mandrake ±±¨î¥xµ{¦¡¡A¦b¡yµwÅé¡z¤ºªº\n"
-"¡y¦Lªí¾÷¡z¶µ¥Ø¨Ó¶i¦æ³]©w"
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"ºô¸ôªA°Èªº¦s¨ú¥\¯à¨Ã¥¼¶}±Ò¡A¦Ó¥B¤]µLªk±Ò°Ê³o­ÓªA°È¶µ¥Ø¡C\n"
-"½ÐÀˬd¤@¤U±zªº³]©w¡A¬Æ¦Ü¥]§t±zªºµwÅé¬O§_³]©w¥¿½TµL»~¡C\n"
-"·íÀˬd§¹²¦«á¡A¦A­«·s³]©w»·ºÝ¦C¦Lªº¬ÛÃö¶µ¥Ø¡C"
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "¥¿¦b­«·s±Ò°Ê¦C¦L¨t²ÎªA°È ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "°ª"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "ºÆ¨gª¬ºA"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "¦b %s ¦w¥þµ¥¯ÅÀô¹Ò¤U¥¿¦b¦w¸Ë¦C¦LªA°È¨t²Î¶µ¥Ø"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"±z¥Ø«e¥¿·Ç³Æ¦b¡u%s¡v¦w¥þµ¥¯ÅªºÀô¹Ò¦w¸Ë¨Ó¦w¸Ë¡u%s¡z\n"
-"³o­Ó¦C¦L¨t²Î¶µ¥Ø¡C\n"
-"\n"
-"³o­Ó¦C¦LªA°È¶µ¥Ø¡A¬ÛÃöµ{¦¡±N·|¦b¹õ«á¹B§@¡A¥H«K©ó¯à°÷\n"
-"´£¨Ñ¬ÛÃö¦Lªí¥\¯à¡C¦¹¥~¡A¦C¦L¬ÛÃöªºªA°È¡A¤]¯à°÷¸g¥Ñºô¸ô\n"
-"ªº¤è¦¡¶i¦æ¦s¨ú¡A©Ò¥H¬Y­Ó¼h­±¨Ó»¡³o¥i¯à¦³³Q§ðÀ»ªº¦MÀI¡C\n"
-"¦]¦¹¡A¦b³o­Ó¦w¥þµ¥¯ÅÀô¹Ò¤U¡A±N¥u¦³¤Ö³¡¥÷ªºªA°Èµ{¦¡¹w³]\n"
-"·|¦b¶}¾÷®É±Ò°Ê¡C\n"
-"\n"
-"±z½T©w­n¶}©l³]©w³o¥x¾÷¾¹¤Wªº¦C¦L¶µ¥Ø³]©w¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "©ó¶}¾÷®É±Ò°Ê¦C¦LªA°È¨t²Î"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"¦C¦LªA°È¨t²Î (%s) ±N¤£·|¦b¨t²Î¶}¾÷®É¸ü¤J¡C\n"
-"\n"
-"­Y¬O±z¨t²Î³]©w¬O¿ï¾Ü¤ñ¸û°ªªº¦w¥þµ¥¯Å¶µ¥Øªº¸Ü¡A\n"
-"¹w³]¤]¬O¤£·|±Ò°Ê¦C¦LªA°Èªº¶µ¥Øªº¡C\n"
-"\n"
-"±z§Æ±æ³oÃä¯à°÷³]©w¦b¶}¾÷®É¯à°÷¹w³]±Ò°Ê¦C¦L\n"
-"ªA°Èªº¶µ¥Ø¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "¥¿¦bÀˬd¤w¸g¦w¸Ëªº³nÅé"
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "¥¿¦b²¾°£ LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "¥¿¦b²¾°£ LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "¿ï¾Ü¦Lªí¦C¦L¨t²Î"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "±z¥´ºâ¥Î¨º¤@®M¦C¦L¨t²Î¡H"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "¥¿¦b³]©w¡u%s¡v¦Lªí¾÷¤¤ ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "¥¿¦b¦w¸Ë Foomatic ®M¥ó..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "¦Lªí¾÷¿ï¶µ"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "¥¿¦b·Ç³Æ Mandrake ¦Lªí¾÷³]©wºëÆF..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "¥¿¦b³]©wÀ³¥Îµ{¦¡..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "±z­n³]©w¦Lªí¾÷¦C¦L¶µ¥Ø¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "¦C¦L¨t²Î¡G"
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"¤U¦Cªº¦Lªí¾÷³£¤w¸g³]©w¹L¤F¡A±z¥i¥HÂI¿ï¨ä¤¤¤@­Ó¶µ¥Ø¡A\n"
-"¥i¥H¬d¬Ý¤º®e¸ê°T©ÎªÌ¬O­×§ï¤º®e³]©w¡A¥]§t³]©w¬°¹w³]¦Lªí¾÷¡C\n"
-"­nÀ˵øÃö©ó³o¥x¦Lªí¾÷ªº¸ê°T¡A©ÎªÌ¬O³]©wÅý³o¥x¦Lªí¾÷¦b\n"
-"Star Office/OpenOffice.org ¤º¦¨¤@¥x¥i³Q¨Ï¥Îªº CUPS ªA°È¥D¾÷¡C"
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"¤U¦Cªº¦Lªí¾÷³£¤w¸g³]©w¹L¤F¡A±z¥i¥HÂI¿ï¨ä¤¤¤@­Ó¶µ¥Ø¡A\n"
-"¥i¥H¬d¬Ý¤º®e¸ê°T©ÎªÌ¬O­×§ï¤º®e³]©w¡A¥]§t³]©w¬°¹w³]¦Lªí¾÷¡C"
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "§ó·s¦Lªí¾÷²M³æ (­«·s´M§ä»·ºÝ¥i¥Îªº©Ò¦³ CUPS ¦Lªí¾÷)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Åܧó¦C¦L¨t²Î"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "¤@¯ë¼Ò¦¡"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "±zÁٻݭn³]©w¥t¥~¤@¥x¦Lªí¾÷¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "­×§ï¦Lªí¾÷³]©w"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"¦Lªí¾÷ %s\n"
-"±z­n­×§ï³o­Ó¦Lªí¾÷ªº¨º­Ó¶µ¥Ø¡H"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "°µ§a !"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "¦Lªí¾÷³s½u¤è¦¡"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "¦Lªí¾÷¦WºÙ,´y­z,¦ì¸m"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "¦Lªí¾÷¼t°Ó,«¬¸¹,ÅX°Êµ{¦¡"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "¦Lªí¾÷¼t°Ó,«¬¸¹"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "¨Ï¥Î³o¥x¦Lªí¾÷¬°¹w³]¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "·s¼W³o¥x¦Lªí¾÷¦Ü Star Office/OpenOffice.org ¤º"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "²¾°£¦ì©ó Star Office/OpenOffice.org ªº¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "¦C¦L´ú¸Õ­¶..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "ÁA¸Ñ¦p¦ó¨Ï¥Î³o¥x¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "§R°£¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "¥¿¦b§R°£Â¦³¦Lªí¾÷ \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "¹w³]¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "³o¥x¦Lªí¾÷ \"%s\" ±N·|³Q³]©w¦¨¬°¹w³]¦Lªí¾÷¡C"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "·s¼W¦Lªí¾÷¦Ü Star Office/OpenOffice.org ¤º"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "³o¥x¦Lªí¾÷ \"%s\" ¤w¸g¦¨¥\ªº·s¼W©ó Star Office/OpenOffice.org ¤º¡C"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "µLªk·s¼W¦Lªí¾÷ \"%s\" ¨ì Star Office/OpenOffice.org ¤º¡C"
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "²¾°£ Star Office/OpenOffice.org ¤ºªº¦Lªí¾÷"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "¤w¸g¦¨¥\ªº±N Star Office/OpenOffice.org ªº¦Lªí¾÷ \"%s\" ²¾°£¡C"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "µLªk²¾°£¦b Star Office/OpenOffice.org ªº¦Lªí¾÷ \"%s\"¡C"
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "±z½T©w­n§R°£ \"%s\" ¦Lªí¾÷¶Ü¡H"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "²¾°£¦Lªí¾÷ \"%s\" ¤¤ ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy ¥N²z³]©w"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Åwªï¨Ó¨ì proxy ¥N²z³]©w¤u¨ã¡C\n"
-"\n"
-"¦b³o¸Ì¡A±z¯à°÷³]©w±zªº http ©ÎªÌ¬O ftp Ãþ«¬ªº¥N²z³]©w¡A¨Ã¥]§t\n"
-"¬O§_­n¨Ï¥Î±K½Xµn¤Jµ¥¾÷¨î\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr "­Y¬O±z¤£­n¨Ï¥Î http ¥N²zªº¸Ü¡A¯d¤UªÅ¥Õ¸ê°T¤£¶ñ¤J§Y¥i"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "³s±µ°ð"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "¥N²z¦øªA¾¹ªº³]©w®æ¦¡¥²¶·¬° http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "³s±µ°ðªºÄæ¦ì³]©w»Ý­n¬°¼Æ¦r"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr "­Y¬O±z¤£­n¨Ï¥Î ftp ¥N²zªº¸Ü¡A¯d¤UªÅ¥Õ¸ê°T¤£¶ñ¤J§Y¥i"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "¥N²z¦øªA¾¹ªº³]©w®æ¦¡¥²¶·¬° ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"½Ð¿é¤J­nµn¤J proxy ¨Ï¥Îªº id »P±K½X¡C­Y¬O¤£¥Îµn¤Jªº¸Ü¡A\n"
-"¯d¤UªÅ¥Õ¤£¶ñ§Y¥i"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "µn¤JID"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "±K½X"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "¦A¦¸¿é¤J±K½X"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "¿é¤Jªº±K½X¤£²Å¦X¡A½Ð­«·s¿é¤J"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "µLªk¦b _¤w®æ¦¡_ ¤ÆªººÏºÐ°}¦C md%d ¤¤¥[¤J¤À³Î°Ï"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "µLªk¼g¤JÀÉ®× %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ¥¢±Ñ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "©I¥s mkraid ¥¢±Ñ (¤]³\¬O raidtools ¨S¦w¸Ë©Ò¾É­Pªº)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "¤À³Î°Ï¼Æ¥Ø¤£¨¬¥H¥Î¨Ó³]©w¦¨¬°¶¥¼h %d ªººÏºÐ°}¦C\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "±Ò°Ê ALSA (Advanced Linux Sound Architecture) ­µ®Ä¨t²Î"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "´£¨Ñ¶g´Á©Êªº©R¥O±Æµ{µ{¦¡"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"´£¨ÑºÊ·þ¹q¦Àª¬ºA¡A¥H¤Î©I¥s syslog ¬ö¿ý¬ÛÃöª¬ºA¡C¦¹¥~¡A\n"
-"·í¹q¦À¹q·½¤£°÷®É¡A¤]¥i¯à¦Û°Ê©I¥sÃö¾÷µ{¦¡¶i¦æÃö¾÷°Ê§@¡C"
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr "atd ªA°Èµ{¦¡¡A¯à°÷Åý±z¦b¦b©R¥O¦C«ü©w¬Y­Ó®É¶¡°õ¦æ¬Y­Óµ{¦¡¡C"
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ¬O­Ó¼Ð·Ç unix ¨t²Îµ{¦¡¡A¯à°÷´£¨Ñ¨Ï¥ÎªÌ©w´Á°õ¦æ¯S©wµ{¦¡¡C\n"
-"vixie ª©¥»ªº cron ¼W¥[¤F³\¦h¥\¯à¡A\n"
-"¦b¦w¥þ©Ê»P³]©w¤è­±¯à°÷§ó¼u©Ê¦n¥Î¡C"
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ¯à°÷Åý¨t²Î¦b¤å¦r¼Ò¦¡¤UÅX°ÊÅã¥Ü¥X·Æ¹«´å¼Ð¡A¯à°÷¦b Midnight Commander\n"
-"³oÃþµ{¦¡¤¤©Ò¨Ï¥Î¡C¥t¥~ÁÙ¯à°÷¤ä´©¦b¤å¦r¼Ò¦¡¤U¿Ã¹õ¤å¦rªº°Å¶K½Æ»s¥\¯à¡C"
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake µ{¦¡·|¶i¦æµwÅé°»´ú°Ê§@¡A¥H«K©ó³]©w·s¥[¤J©ÎªÌ¬O¦³Åܧó¹L\n"
-"ªº¶gÃä¸Ë¸m¡C"
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache ¬O¤@­Ó´£¨Ñ Web ªA°Èªºµ{¦¡¡A´£¨Ñ¬[³] Web Server Åý¨Ï¥ÎªÌÂsÄý¡C"
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"internet superserver daemon (¤@¯ëºÙ©I¬° inetd)¡A¥¦¥N¬°¹³¬O telnet¡Bftp,\n"
-"rsh¡Brlogin µ¥µ¥³oÃþªA°ÈªººÊÅ¥¡AµM«á¦³³s½u½Ð¨D®É¡A¦b¹ê»Ú©I¥s´£¨ÑªA°Èªº\n"
-"µ{¦¡¶i¦æ«áÄò¥æ½Í·¾³qªº°Ê§@¡CÃö³¬³o­Ó¶µ¥Ø¡A¥õ¿à©ó³o­ÓªA°È¥N¬°ºÊÅ¥±Ò°Êªº\n"
-"¶µ¥Ø±N·|µLªk¨Ï¥Î"
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"±Ò°Ê Linux Kernel 2.2 ¨t¦Cªº¨¾¤õÀð¾÷¨î¡A¥Î¨Ó«OÅ@±zªº¾÷¾¹¤£·|¾D¨ü\n"
-"¥~¨Óªººô¸ô§ðÀ»¡C"
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"³o­ÓªA°È¶µ¥Ø±N·|¸ü¤J\n"
-"/etc/sysconfig/keyboard\n"
-"ÀɮתºÁä½L¹ïÀ³³]©w²ÕºA¡C\n"
-"±z¥i¥H¨Æ«á¨Ï¥Î kdbconfig µ{¦¡¨Ó³]©w¡C\n"
-"¤@¯ë¨Ó»¡¡A¥Ø«e¤j³¡¤À¾÷¾¹¨Ã¤£»Ý­n³o­Ó¶µ¥Ø¡C"
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"¦Û°Ê²£¥Í kernel header ¸ê°T¬ö¿ý¡Aµ¹³o¨ÇÀɮרϥÎ:\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "¨t²Î¶}¾÷®É¯à°÷¦Û°Ê°»´ú¶gÃä¸Ë¸mªºª¬ºA¨Ã¥B³]©w¡C"
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "Linuxconf µ{¦¡·|¦b¶}¾÷®É°»´ú¤@¨Ç¶µ¥Ø¡A½Õ¾ãºûÅ@¨t²Î¤@¨Ç²ÕºA³]©w¡C"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ªA°Èµ{¦¡¬O lpr µ{¦¡¹B§@¤W¤£¥i¯Êªºµ{¦¡¡C­Y¬O­n¬[³]¦C¦LªA°È¦øªA¾¹\n"
-"ªº¸Ü¡Alpd ¬O«Ü±`¨£ªº¿ï¾Ü¡C"
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr "Linux Virtual Server, ¥Î¨Ó¬[³]¤@­Ó°ª®Ä¯à»P°ª®Ä²vªº LVS ¦øªA¾¹¡C"
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) ¾A¥Î¨Ó´£¨Ñ Domain Name Server (DNS) ªA°Èªºµ{¦¡¡A\n"
-"¥Î¨Ó¸ÑªR¥D¾÷¦WºÙ»P IP ¹ïÀ³ªºÃö«Y¡C"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"±¾¸ü»P¨ø¤U©Ò¦³ºô¸ôÀɮרt²Î¡A¤ñ¤è¹³¬O ºô¸ôÀɮרt²Î(NFS), SMB, \n"
-"NCP (NetWare) ³oÃþ¡C"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr "¦b¨t²Î¶}¾÷®É¡A¿ï¾Ü±Ò°Êºô¸ô¥\¯à¡A©ÎªÌ¬OÃö³¬¤£±Ò°Ê¸ÓªA°È¡C"
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ¬O¤@­Ó±`¥Îªººô¸ô³q°T¨ó©w¡A¯à°÷´£¨Ñ¸óºô¸ô¤À¨É¨ä¥L¥D¾÷ªºÀɮרt²Î¡C\n"
-"³o­ÓªA°È¶µ¥Ø·|¨Ì·Ó¨t²Îªº /etc/exports Àɮ׳]©w¨Ó±Ò°Ê NFS ¤À¨É¥\¯à¡C"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ¬O¤@­Ó±`¥Îªººô¸ô³q°T¨ó©w¡A¯à°÷´£¨Ñ¸óºô¸ô¤À¨É¨ä¥L¥D¾÷ªºÀɮרt²Î¡C\n"
-"³o­ÓªA°È´£¨Ñ NFS ÀɮפÀ¨É®ÉªºÂê©w¾÷¨î¡C"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"¯à°÷¦b¶}¾÷®É¶}±Ò NumLock ¿O¡A¥H«K©ó¦b console ©ÎªÌ¬O X ¤U¨Ï¥Î\n"
-"¤E®cÁä¼Æ¦r¥\¯à¡C"
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "¤ä´© OKI 4w ¥H¤Î WindowsPrinter ¦Lªí¾÷¡C"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ¤ä´©¡A¤@¯ë¬O¥Î¨ÓÅýµ§°O«¬¹q¸£ªººô¸ô¥d¡BModem ÅX°Ê©Ò³]­p¡C\n"
-"¤@¯ë¨Ó»¡¡A­nÃB¥~³]©w¦n PCMCIA «á¤~·|¯u¥¿±Ò°Ê PCMCIA ªA°È¡A¦]¦¹\n"
-"´Nºâ¬O¨t²Î¤£»Ý­n³o­Ó¥\¯à¡A¹w¥ý±Ò°Ê¥L¤]¤£·|¦³¥ô¦ó¼vÅT¡C"
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper µ{¦¡ºÞ²z¤F RPC ³s½u¡A¤@¯ë¥Î©ó NFS »P NIS ³q°T¨ó©w¤º¡C\n"
-"­Y¬O±z¨t²Î­n¨Ï¥Î¨ì RPC ¬ÛÃöªA°È¡A±z´N¥²¶·±Ò°Ê¥¦¡C"
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr "Postfix ¬O¤@­Ó¶l¥ó¶Ç°e¥N²zµ{¦¡¡A¥Î¨Ó§ë»¼«H¥ó´£¨Ñ SMTP ªA°È¡C"
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr "Àx¦s»P¦^¦s°ª«~½è¨t²Î¶Ã¼Æ²£¥Í¾¹"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"µ¹ block ³oÃþ°Ï¶ô¸Ë¸m«ü¬£ raw ¸Ë¸m (´N¹³¬OµwºÐªº¤À³Î°Ï)¡A\n"
-"¤@¯ë¬Oµ¹ oracle ³oÃþ¯S®íµ{¦¡¨Ï¥Î¡C"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed ªA°Èµ{¦¡¤¹³\³z¹L RIP ³q°T¨ó©w¨Ó§ó·s¸ô¥Ñªíªº¸ê°T¡C\n"
-"¤@¯ë¨Ó»¡¡ARIP ¬Oµ¹¤p«¬ºô¸ô¥Î³~¨Ï¥Î¡C"
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ³q°T¨ó©w¡A¯à°÷Åý¦ì©óºô¸ô¤Wªº¨Ï¥ÎªÌ±µ¦¬¨ìºô¸ô¤W¥ô¦ó¤@¥x\n"
-"¥D¾÷ªº¹B§@®Ä¯à¸ê°T¡C"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ³q°T¨ó©w¡A¯à°÷Åý¦ì©óºô¸ô¤Wªº¨Ï¥ÎªÌ±oª¾¨º¨Ç¨Ï¥ÎªÌµn¤J¦b¨º¨Ç\n"
-"¾÷¾¹¤W"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ³q°T¨ó©w¡A¯à°÷Åý»·ºÝªº¨Ï¥ÎªÌÀò±o¸Ó¾÷¾¹¤W©Ò¦³µn¤J¦b¥D¾÷¤Wªº\n"
-"¨Ï¥Î§ä (Ãþ¦ü©ó finger)¡C"
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "¦b±zªº¨t²Î¤W±Ò°Ê­µ®ÄªA°È¨t²Î"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"syslog ªA°Èµ{¦¡¯à°÷Åý¨t²Î³\¦hªA°Èµ{¦¡¥Î¬ö¿ýÀɮרӦ^À³¨t²Î\n"
-"©Òµo¥Í¤@¨Ç¨Æ±¡¡C«Øij±z¤@©w­n±Ò°Ê syslog ªA°Èµ{¦¡"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "¸ü¤J usb ¸Ë¸m©Ò»Ý­nªºÅX°Êµ{¦¡"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"±Ò°Ê X Font Server\n"
-"(X Window Àô¹Ò·|»Ý­n¥Î¨ì)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "¿ï¾Ü§Æ±æ¦b¤U¤@¦¸¶}¾÷®É±Ò°ÊªºªA°Èµ{¦¡¶µ¥Ø"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "¦C¦L"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "ÀɮפÀ¨É"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "¨t²Î"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "»·ºÝºÞ²z"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "¸ê®Æ®w³nÅé"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "ªA°Èµ{¦¡¡G %d ¤w¸g±Ò°Ê¡A¦@¦³ %d µù¥Uªº¶µ¥Ø"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Server µ{¦¡"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "°õ¦æ¤¤"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "¥¼±Ò°Ê"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "ªA°Èµ{¦¡"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"©êºp ! ³o­ÓªA°È¶µ¥Ø¨Ã¨S¦³\n"
-"ÃB¥~ªº¬ÛÃö¸ê°T¡C"
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "¶}¾÷¦Û°Ê¸ü¤J"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "±Ò°Ê"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Ãö³¬"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "·PÁ±z¿ï¾Ü Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Åwªï¨Ó¨ì¶}©ñ·½½Xªº¥@¬É"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSoft ªº¦¨¥\¡A¨Ó¦Û©ó¦Û¥Ñ³nÅ骺µo®i·Ç«h¡CMandrake Linux\n"
-"³\¦h·sªº¥\¯à»P¾÷¨î¡A³£¬O¨Ó¦Û©ó¥þ¥@¬É Linux ªÀ¸s§V¤Oªº¦@¦P¦¨ªG¡C"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "°Ñ»P¦Û¥Ñ³nÅé¥@¬É"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"­nÀò±o¶i¤@¨B¶}©ñ·½½XªÀ¸s¸ê°T»P¦¨¬°·|­û¤è¦¡¡A¥]§t¾Ç²ß¡B\n"
-"±Ð¾Ç¡B¨D§U»P°Ñ»P°Q½×¡A½Ð°Ñ¦Ò§Ú­Ì­º­¶¤Wªº \"Community\" ºô­¶¶µ¥Ø"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "ºô¸ô»P°T®§¶Ç»¼"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 ´£¨Ñ¤F¬Û·íÂ×´Iªº³nÅéÅý±z¤è«Kªº¨Ï¥Î\n"
-"Internet¸ê°T¡C¨ä¤¤´£¨Ñ¤F Mozilla¡BKonqueror\n"
-"Åý±zÂsÄýºô­¶¸ê®Æ¡F¨Ï¥Î Kmail¡BEvolution µ¥¶l¥ó¦¬µo\n"
-"³nÅé³B²z­Ó¤H¶l¥ó¡A¥Î Xchat µ¥³nÅé¶i¦æ½u¤W²á¤Ñ"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "¦h´CÅé»Pø¹Ï"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 ´£¨Ñ¤FÅý±zºÉ±¡µo´§¦h´CÅ骺»Ý¨D¡A\n"
-"Åý¨Ï¥ÎªÌ¯à°÷¶i¦æ¹Ï¤ùªºÂsÄý¡B­µ¼Öªº¼·©ñ¡BÆ[¬Ý¹qµøµ¥"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "µ{¦¡¶}µo¥­¥x"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 ´£¨Ñ§¹³Æªºµ{¦¡µo®i¥­¥xªº®M¥ó¡A\n"
-"Åýµ{¦¡³]­p®v¯à°÷¨Ï¥ÎÂ×´Iªº¸ê·½¶}µo¥X±j¤jªºµ{¦¡³nÅé"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake ±±¨î¤¤¤ß"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 ´£¨Ñ¤F¤@¾ã®M±j¤jªº¥\¯à¨ó§U¨Ï¥ÎªÌ¨Ó³]©w¨t²Î¡A\n"
-"±z¥i¥H³z¹L Mandrake Linux ±±¨î¤¤¤ß¶i¦æ³]©w°Ê§@"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "¨Ï¥ÎªÌ¤¶­±"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 ´£¨Ñ¤F¼Æ¤QºØ¹Ï§Î¤¶­±ºÞ²zµ{¦¡¡A¥]§t\n"
-"GNOME 1.4¡BKDE 2.2.2¡BWindows Maker¡BIceWM¡BBlackBox..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "¦øªA¾¹³nÅé"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"·í±z¥Î·Æ¹«¿ï¾Ü¤U­±¶µ¥Ø®É¡A±zªº¾÷¾¹±N¨ã³Æ±j¤jªº¦øªA¾¹¥\¯à¡C\n"
-"¨ä¤¤¹³¬O: Web Server¡BMail Server¡BFirewall¡BRouter¡BPrinter..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "¹CÀ¸"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 ´£¨Ñ¤F³\¦h¦nª±ªº¹CÀ¸¡A\n"
-"¤ñ¤è¹³¬O¡G¯q´¼¡B°Ê§@¡B¯ÈµP¡B¾Ô²¤... µ¥¹CÀ¸¶µ¥Ø"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "Mandrake ®Õ¶é"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"±z§Æ±æ¯à°÷²³æ¡B§Ö³t¥H¤Î§K¶Oªº¾Ç²ß Linux ¨t²Î¶Ü¡H\n"
-"MandrakeSoft ´£¨Ñªº§K¶Oªº Linux °V½m¡C¸Ô²Ó³¡¥÷¡A\n"
-"½Ð°Ñ¦Ò¤@¤U§Ú­Ìºô¯¸¤Wªº MandrakeCampus ¶µ¥Ø"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "Mandrake ±M®a"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"¨Ó¦Û©ó¶Ç²Î Linux ªÀ¸s¡BMandrakeSoft ªº Linux ¤ä´©¹M¤Î¥@¬É\n"
-"­Y¬O±z¬O Linux ªº¦Ñ¤â¡A½Ð¥[¤J MandrakeExpert¡A¦b Mandrake\n"
-"ªº¤ä´©ºô¯¸¤º¨Ó¤À¨É±zªº±M·~§Þ³N"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "Mandrake ¿Ô¸ß"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"¹ï©ó±zªº IT ±M®×­pµe¡A§Ú­Ìªº±M·~¿Ô¸ß®a¯à°÷¤ÀªR¥X\n"
-"±zªº»Ý¨D¨Ã´£¨Ñ©Ò»Ý­nªº¸Ñ¨M¤è®×¡C¨­¬° Linux ®M¥ó\n"
-"´£¨Ñ¼t°Ó¥H¤Î§Ú­ÌªºÂ×´I¸gÅç¡A¯à°÷¬°±zªº°Ó·~»Ý¨D\n"
-"´£¨Ñ§¹³Æªº¿Ô¸ß"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "Mandrake °Ó©±"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"¤@¨t¦C§¹¾ãªº Linux ¸Ñ¨M¤è®×¡A¨Ã¥B¥]§t§Ú­Ì¦U¦¡°Ó«~¡A\n"
-"©Ò¦³¸ê°T³£©ñ¸m¦b§Ú­Ìªº½u¤W¹q¤l°Ó©±¤º"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"­nÀò±o§ó¦hÃö©ó MandrakeSoft ±M·~ªA°È¥H¤Î°Ó·~ªº¤ä´©¡A\n"
-"½Ð°Ñ¾\¤U­±ªººô­¶¸ê°T¡G"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "¥¿¦b¦w¸Ë®M¥ó..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"µ{¦¡µLªkŪ¨ú±zªºµwºÐ¤À³Î°Ï°t¸mªí¡A³o­Ó°t¸mªí¦³°ÝÃD :(\n"
-"µ{¦¡·|¸ÕµÛ©¿²¤Ãa±¼ªº¤À³Î°Ï¥H«á¦AÄ~Äò¡C"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "¿ù»~¡I"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "§Ú§ä¤£¨ì³o­Ó­«­nªºÀÉ®× %s ¡C"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "¦Û°Ê¦w¸Ë³]©wµ{¦¡"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"¥Ø«e·Ç³Æ³]©w¦Û°Ê¦w¸ËºÏ¤ù¡C³o­Ó¥\¯à¦³ÂI¦MÀI¡A¨Ï¥Î¤W­n«Ü·V­«¡C\n"
-"\n"
-"³o­Ó¥\¯à¡A±z±N¯à°÷«Ü¦Û°Êªº¦b©Ò­n¦w¸Ëªº¹q¸£¤W¦Û°Ê¶i¦æ¦w¸Ëªº\n"
-"°Ê§@¡A¦³¨Ç¨BÆJ«h¯à°÷°±¤U¨ÓÅý¨Ï¥ÎªÌ¦Û¤v¤â°Ê¶i¦æ¤@¨Ç¾Þ§@¡C\n"
-"\n"
-"¬°¤F³Ì¦w¥þ¦Ò¶q¡A©Ò¦³¤À³Î°Ï¹º¤À¥H¤Î®æ¦¡¤Æ°Ê§@±N·|¦Û°Ê¶i¦æ¡C\n"
-"\n"
-"±z§Æ±æÄ~Äò¶Ü¡H"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "¦Û°Ê¤Æ¨BÆJ³]©w"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr "½Ð¿ï¾Ü¨C¤@­Ó¦w¸Ëªº¨BÆJ¡A³o¨Ç±N·|¬O±z©Ò¾Þ§@ªº¦w¸Ë¹Lµ{"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Åwªï!\n"
-"\n"
-"¦Û°Ê¦w¸Ë¤º¥i¥Îªº°Ñ¼Æ¶µ¥Ø³£¦b¥ªÃ䪺°Ï¬q¤º"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "®¥³ß!!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"¤w¸g¦¨¥\«Ø¥ß¦Û°Ê¦w¸ËºÏ¤ù¡C\n"
-"±z¥i¥H¨Ï¥Î³o±iºÏ¤ù¶i¦æ¦Û°Ê¦w¸Ëªºµ{§Ç"
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "¦Û°Ê¦w¸Ë"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "·s¼W¶µ¥Ø"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "²¾°£¤§«e¶µ¥Ø"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup ³øªí²M³æ \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                      DrakBackup ±Æµ{³Æ¥÷³øªí²M³æ\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup ¸ê®Æ³Æ¥÷³øªí²Ó¥Ø\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "¥þ³¡¶i«×"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "³Æ¥÷¨t²ÎÀÉ®×..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "µwºÐ³Æ¥÷ÀÉ®×..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "³Æ¥÷¨Ï¥ÎªÌÀÉ®×..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "µwºÐ³Æ¥÷¶i«×..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "³Æ¥÷¨ä¥LÀÉ®×..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"³z¹L FTP ¶Ç°eÀɮײM³æ: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP ³sµ²¿ù»~¡G¥Ñ©ó FTP ³s½u¿ù»~¡A³Æ¥÷ÀÉ®×±N¨S³z¹L FTP ³Æ¥÷¶Ç°e¥X¥h¡C\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) ¶l¥óµo°e®Éµo¥Í¿ù»~¡C\n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Àɮ׿ï¨ú"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "¿ï¨úÀɮשΪ̬O¥Ø¿ý¡AµM«áÂI¿ï '¥[¤J'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"½ÐÀ˵ø±z©Ò»Ý­nªº¥þ³¡¶µ¥Ø¡C\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "³o­Ó¿ï¶µ¯à°÷³Æ¥÷»PÁÙ­ì±z¨t²Îªº /etc ¥Ø¿ý¡C\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "³Æ¥÷±z¨t²ÎÀɮסC(/etc ¥Ø¿ý)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "¨Ï¥Î»¼¼W³Æ¥÷ (¤£­nÂл\¦³³Æ¥÷)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "¤£­n¥]§t­«­nªºÀÉ®× (passwd¡Bgroup¡Bfstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "¨Ï¥Î¸Ó¿ï¶µ¡A±z±N¯à°÷ÁÙ­ì /etc ¥Ø¿ý¤º¥ô¦óª©¥»ªºÀɮץؿý"
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "½ÐÀˬd§Æ±æ­n³Æ¥÷ªº©Ò¦³¨Ï¥ÎªÌ¶µ¥Ø¡C"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "¤£­n¥]§tÂsÄý¾¹ªº§Ö¨ú¸ê®ÆÀÉ"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "¨Ï¥Î»¼¼W³Æ¥÷ (¤£·|Âл\¦³³Æ¥÷)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "²¾°£¿ï¨ú¶µ¥Ø"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "¨Ï¥ÎªÌ"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "¨Ï¥Î FTP ³s½u³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "½Ð¿é¤J¥D¾÷¦WºÙ©Î¬O IP"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr "½Ð¿é¤J­n³Æ¥÷¨ì¸Ó¥D¾÷ªº©Ò¦b¥Ø¿ý¦WºÙ"
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "½Ð¿é¤Jµn¤J±b¸¹"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "½Ð¿é¤Jµn¤J±K½X"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "°O¦í¸Ó±K½X"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP ³s½u"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "¦w¥þ³s½u"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "¨Ï¥Î CD/DVDROM ³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "½Ð¿ï¨ú±z CD ¤ù®e¶q"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "¦pªG±z¨Ï¥Îªº¬O CDRW ¸Ë¸m¡A½Ð¿ï¨ú¸Ó¶µ¥Ø"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "¦pªG±z­n¥ý²M°£ CDRW ­ì¦³¸ê®Æ¡A½Ð¿ï¨ú¸Ó¶µ¥Ø"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"¦pªG±z§Æ±æ¥]§t¦w¸Ë¥i¶}¾÷\n"
-"CD ªº¸Ü¡A½Ð¿ï¨ú¸Ó¶µ¥Ø"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"½Ð¿é¤J±zªº¿N¿ý¾¹¸Ë¸m¦WºÙ\n"
-"¤ñ¤è¹³¬O: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "¨Ï¥ÎºÏ±a¶i¦æ³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "½Ð¿é¤J±z­n¥Î¨Ó³Æ¥÷¨Ï¥Îªº¸Ë¸m¦WºÙ"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr "½Ð¿é¤J³Æ¥÷¤¹³\³Ì¤jªº¤j¤p"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "½Ð¿é¤J±z­nÀx¦sªº¥Ø¿ý¦WºÙ¡G"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "³Æ¥÷Àɮױҥγ̤j®e¶q°tµ¹­­¨î¡C"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "ºô¸ô"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "µwºÐ / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "¨C¤p®É"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "¨C¤Ñ"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "¨C¬P´Á"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "¨C­Ó¤ë"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "¨Ï¥Î±Æµ{µ{¦¡"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"½Ð¿é¤J¨C¤@¦¸³Æ¥÷ªº\n"
-"¶¡¹j®É¶¡"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "½Ð¿ï¾Ü­n¥Î¨Ó³Æ¥÷ªº¸Ë¸m"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "°t¦X±Æµ{¨Ï¥ÎµwºÐ³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "°t¦X±Æµ{¨Ï¥ÎFTP¶Ç¿é³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "½Ð½T©w±z¨t²Î¦³¦w¸Ë¨Ã¥B¦³±Ò¥Î cron ±Æµ{ªA°Èµ{¦¡"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "¦b¨C¦¸³Æ¥÷§¹¦¨«áµo°e¶l¥ó³qª¾¸Ó¨Ï¥ÎªÌ¡G"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "³Æ¥÷¶µ¥Ø³]©w"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "³Æ¥÷Àx¦s¦ì¸m³]©w"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "³Æ¥÷®É¶¡³]©w"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "§ó¦h¿ï¶µ"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup ²ÕºA"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "½Ð¿ï¨ú±z­n³Æ¥÷ªº¶µ¥Ø"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "¦ì©óµwºÐ"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "³z¹Lºô¸ô"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "½Ð¿ï¨ú±z­n³Æ¥÷ªº¶µ¥Ø"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "³Æ¥÷¨t²Î¸ê®Æ"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "³Æ¥÷¨Ï¥ÎªÌ¸ê®Æ"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "¤â°Ê¿ï¨ú¨Ï¥ÎªÌ"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"³Æ¥÷¨Ó·½ÀÉ: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- ¨t²ÎÀÉ®×:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- ¨Ï¥ÎªÌÀÉ®×:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ¨ä¥LÀÉ®×:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Àx¦s©óµwºÐªº¸ô®|: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Àx¦s©ó FTP ¯¸¥x: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t ¨Ï¥ÎªÌ¦WºÙ: %s\n"
-"\t\t ¦ì©ó¸ô®|: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- ¿ï¶µ:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\t¤£­n¥]§t¨t²ÎÀÉ®×\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t¨Ï¥Î tar »P bzip2 ¶i¦æ³Æ¥÷\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\t¨Ï¥Î tar »P gzip ¶i¦æ³Æ¥÷\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) ªA°Èµ{¦¡¥]§t :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-µwºÐ\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-¥úºÐ¾÷\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-ºô¸ô (³z¹L FTP)\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\tºô¸ô (³z¹L SSH)\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "©|¥¼³]©w¥ô¦ó²ÕºA¶µ¥Ø¡A½ÐÂI¿ïºëÆF©ÎªÌ¬O¶i¶¥¼Ò¦¡«Ø¥ß¤§¡C\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"­n¦^¦sªº¸ê®Æ²M³æ:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"·´·lªº¸ê®ÆÀɮײM³æ:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "¤U¤@¦¸½Ð¨ú®ø©ÎªÌ¬O²¾°£¸Ó¶µ¥Ø¡C"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "³Æ¥÷ªºÀɮפw¸g·´·l"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid "          All your selectionned data have been          "
-msgstr "          ±z©Ò¿ï¨úªº©Ò¦³¸ê®Æ¤w¸g          "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          ¦¨¥\¦^¦s¨ì %s         "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid "         Restore Configuration       "
-msgstr "         ¦^¦s²ÕºA³]©w       "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "¿ï¨ú OK ¨Ó¦^¦s¨ä¥LÀɮסC"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "½Ð¿ï¨ú­n¦^¦sªº¤é´Á"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "¨Ï¥ÎµwºÐ¶i¦æ³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "¥ÑµwºÐ¦^¦s¡C"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "½Ð¿é¤J³Æ¥÷¸ê®Æ©Ò­n¦^¦sªº¥Ø¿ý"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "½Ð¿ï¨ú­n¥Î¨Ó¦^¦s¸ê®Æªº¸Ë¸m¨Ó·½"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "¨ä¥L¸Ë¸m"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "¦^¦s¨t²Î"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "¦^¦s¨Ï¥ÎªÌÀÉ®×"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "¦^¦s¨ä¥LÀÉ®×"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "¿ï¾Ü­n¦^¦sªº¸ô®|¦WºÙ (¥N´À¹w³]ªº /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "¦b¦^¦s«e¶i¦æ·sªº³Æ¥÷°Ê§@ (¥u¯à°÷¥Î¦b»¼¼W¦¡³Æ¥÷®É¡C)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "¦b¦^¦s¸ê®Æ®É¥ý§R°£¨Ï¥ÎªÌªº¬ÛÃö¥Ø¿ý"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "¦^¦s©Ò¦³³Æ¥÷¸ê®Æ"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "¦Û­q¦^¦s¤è¦¡"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "¨D§U"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "¤W¤@¨B"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Àx¦s"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "«Ø¥ß³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "¦^¦s"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "¤U¤@¨B"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"±z­n¥ý«Ø¥ß³Æ¥÷¸ê®Æ¤~¯à°÷¦^¦s...\n"
-"©ÎªÌ¬O½T»{±z­n¦^¦s¸ê®Æªº¨Ó·½¦ì¸m¥¿½TµL»~!"
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-"  your report mail was not sent\n"
-"  Please configure sendmail"
-msgstr ""
-"»P sendmail Ápôµo¥Í¿ù»~\n"
-"  ¥Ñ©ó¸Ó¿ù»~¡A³Æ¥÷³øªíÀÉ®×±NµLªk°e¥X\n"
-"  ½ÐÀ˵ø±z¨t²Îªº sendmail ¬O§_¦³¿ù»~¡C"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "­n¦w¸Ëªº®M¥ó²M³æ"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"¨Ï¥Î FTP ¤W¶ÇÀɮ׮ɵo¥Í¿ù»~¡C\n"
-"½ÐÀ˵ø±zªº FTP ³]©w¬O§_³]©w¡C"
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "½Ð¿ï¨ú­n¦^¦sªº¸ê®Æ..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "½Ð¿ï¨ú­n³Æ¥÷¨Ï¥Îªº¸Ë¸m..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "½Ð¿ï¾Ü¥Î¨Ó³Æ¥÷¸ê®Æªº¸Ë¸m..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"©|¥¼²£¥Í²ÕºA³]©wÀɮסA½ÐÂI¿ï\n"
-"ºëÆF©ÎªÌ¬O¶i¶¥¼Ò¦¡«Ø¥ß¤§¡C"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "³Æ¥÷¨t²ÎÀÉ®×"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "³Æ¥÷¨Ï¥ÎªÌÀÉ®×"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "³Æ¥÷¨ä¥LÀÉ®×"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "¥þ³¡¶i«×"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "³z¹L FTP °e¥XÀɮפ¤"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "¥¿¦b°e¥XÀÉ®×..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "¸ê®Æ²M³æ¥]§t¬ö¿ý©ó CDROM"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "½Ð¿é¤J¿N¿ý¾¹ªº¼g¤J­¿¼Æ"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "½Ð¿é¤J¿N¿ý¾¹ªº¸Ë¸m¦WºÙ (¤ñ¤è: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "­Y¬O±z§Æ±æ CD ¯à°÷±Ò°Ê¨t²Î¡A½Ð¿ï¨ú¸Ó¶µ¥Ø"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "¨Ì¾Ú¥Ø«e²ÕºA³]©w¶}©l³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "À˵ø³Æ¥÷²ÕºA³]©w"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "ºëÆF³]©w¼Ò¦¡"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "¶i¶¥³]©w¼Ò¦¡"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "¥ß§Y³Æ¥÷"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         /*> cat .backupignore*/\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-"¥Ñ©ó¤£¥¿½Tªº³]©w©Î¬Oµ{¦¡¿ù»~¡A¾É­P«H¥óµLªk¥¿±`µo°e\n"
-"¥X¥h¡C½ÐÀ˵ø±zªº postfix ©ÎªÌ¬O sendmail ³]©w²ÕºA¡C\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"´y­z:\n"
-"\n"
-"  DrakBackup µ{¦¡¬O¤@®M¥Î¨Ó³Æ¥÷¸ê®Æªºµ{¦¡¡C\n"
-"  ³]©w¹Lµ{¤¤¡A±z¥i¥H¿ï¾Ü: \n"
-"\t- ¨t²ÎÀɮסA\n"
-"\t- ¨Ï¥ÎªÌÀɮסA\n"
-"\t- ¨ä¥LÀɮסC\n"
-"\t©ÎªÌ¬O±z¨t²Î©Ò¦³ªºÀɮסA¥]§t¨ä¥L Windows µ¥§@·~¨t²Î¤À³Î°ÏÀÉ®×\n"
-"\n"
-"  DrakBavkup µ{¦¡¤¹³\±z¨Ï¥Î¤U­±ªº¸Ë¸m³Æ¥÷ÀÉ®×:\n"
-"\t- Hard Disk µwºÐ¸Ë¸m¡C\n"
-"\t- NFS ºô¸ôºÏºÐ¡C\n"
-"\t- ¥úºÐ¾÷(CDRW)¡BDVDROM (¥]§t¤ä´©¥i¶}¾÷¥úºÐ»s§@¡B«æ±Ï»P­«·s¦w¸Ëµ¥)¡C\n"
-"\t- FTP ºô¸ô¶Ç¿é¡C\n"
-"\t- RSYNC ºô¸ô¦P¨B¡C\n"
-"\t- Webdav Web¡C\n"
-"\t- Tape ºÏ±a¾÷¡C\n"
-"\n"
-"  DrakBackup ¯à°÷¨Ì·Ó¨Ï¥ÎªÌ³]©w¦^¦s¨ì¯S©w¥Ø¿ý¡C\n"
-"\n"
-"  ¤@¯ë¹w´ÁÀô¹Ò¤U¡A©Ò¦³ªº³Æ¥÷Àɮ׳£°£¦s¦b¨t²Îªº\n"
-"  /var/drakbackup ¥Ø¿ý¤º¡C\n"
-"\n"
-"  ²ÕºA³]©wÀÉ®×:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"¦^¦s¨BÆJ:\n"
-"  \n"
-"  ¦b¦^¦sªº¨BÆJ¤¤¡ADrakBackup ±N·|²¾°£±z¨t²Î­ì¥»ªº¥Ø¿ý¡A\n"
-"  ¨Ã¥B½T»{©Ò¦³ªº³Æ¥÷Àɮ׳£¬O§¹¾ã¨S¿ù»~ªº¡C¤@¯ë«Øij±z\n"
-"  ³Ì¦n¦A¦^¦s¤§«e¦b¶i¦æ¤@¦¸³Æ¥÷¡C\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"¦^¦s³Æ¥÷µo¥Í¿ù»~:\n"
-"\n"
-"¦b¦^¦s¸ê®Æ¹Lµ{¤¤¡ADrakBackup µ{¦¡·|À˵ø³Æ¥÷Àɮ׬O§_\n"
-"¦³·´Ãa¡A¥H«K©ó½T»{¦^¦sªºÀÉ®×¥¿½TµL»~¡C\n"
-"¦b¦^¦s¤§«e¡ADrakBackup µ{¦¡·|¥ý²¾°£­n¦^¦s¸ô®|¤ºªº\n"
-"©Ò¦³Àɮץؿý¡C½Ðª`·N³o¤@ÂI¡A¦]¦¹¤£­n¶Ã­×§ï³Æ¥÷¸ê®ÆÀÉ¡C\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backup will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, Drakbackup will remove\n"
-"  your original directory and verify that all\n"
-"  backup files are not corrupted. It is recommended\n"
-"  you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"´y­z:\n"
-"\n"
-"  DrakBackup µ{¦¡¬O¤@®M¥Î¨Ó³Æ¥÷¸ê®Æªºµ{¦¡¡C\n"
-"  ³]©w¹Lµ{¤¤¡A±z¥i¥H¿ï¾Ü: \n"
-"\t- ¨t²ÎÀɮסA\n"
-"\t- ¨Ï¥ÎªÌÀɮסA\n"
-"\t- ¨ä¥LÀɮסC\n"
-"\n"
-"\t©ÎªÌ¬O±z¨t²Î©Ò¦³ªºÀɮסA¥]§t¨ä¥L Windows µ¥§@·~¨t²Î¤À³Î°ÏÀÉ®×\n"
-"\n"
-"  DrakBavkup µ{¦¡¤¹³\±z¨Ï¥Î¤U­±ªº¸Ë¸m³Æ¥÷ÀÉ®×:\n"
-"\t- Hard Disk µwºÐ¸Ë¸m¡C\n"
-"\t- NFS ºô¸ôºÏºÐ¡C\n"
-"\t- ¥úºÐ¾÷(CDRW)¡BDVDROM (¥]§t¤ä´©¥i¶}¾÷¥úºÐ»s§@¡B«æ±Ï»P­«·s¦w¸Ëµ¥)¡C\n"
-"\t- FTP ºô¸ô¶Ç¿é¡C\n"
-"\t- RSYNC ºô¸ô¦P¨B¡C\n"
-"\t- Webdav Web¡C\n"
-"\t- Tape ºÏ±a¾÷¡C\n"
-"\n"
-"  DrakBackup ¯à°÷¨Ì·Ó¨Ï¥ÎªÌ³]©w¦^¦s¨ì¯S©w¥Ø¿ý¡C\n"
-"\n"
-"  ¤@¯ë¹w´ÁÀô¹Ò¤U¡A©Ò¦³ªº³Æ¥÷Àɮ׳£°£¦s¦b¨t²Îªº\n"
-"  /var/drakbackup ¥Ø¿ý¤º¡C\n"
-"\n"
-"  ²ÕºA³]©wÀÉ®×:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"¦^¦s¨BÆJ:\n"
-"  \n"
-"  ¦b¦^¦sªº¨BÆJ¤¤¡ADrakBackup ±N·|²¾°£±z¨t²Î­ì¥»ªº¥Ø¿ý¡A\n"
-"  ¨Ã¥B½T»{©Ò¦³ªº³Æ¥÷Àɮ׳£¬O§¹¾ã¨S¿ù»~ªº¡C¤@¯ë«Øij±z\n"
-"  ³Ì¦n¦A¦^¦s¤§«e¦b¶i¦æ¤@¦¸³Æ¥÷¡C\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "¦w¸Ë %s ¥¢±Ñ¡Aµo¥Í¦p¤U¤§¿ù»~¡G"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "´M§ä¤w¦w¸Ë¦r«¬"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "¤Ï¦V¿ï¨ú¤w¦w¸Ë¦r«¬"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "¸ÑªR©Ò¦³¦r«¬"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "§ä¤£¨ì¦r«¬ÀÉ"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "§¹¦¨"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "¦b±z¨t²Î¥H¨ø¤Wªº¤À³Î°Ï¤º§ä¤£¨ì¥ô¦ó¦r«¬ÀÉ®×"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "­«·s¿ï¨ú¥¿½Tªº¦r«¬"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "§ä¤£¨ì¥ô¦ó¦r«¬¡C\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "©ó¤w¦w¸Ë²M³æ¤º·j´M¦r«¬"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "¦r«¬½Æ»s"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type ¦rÅéÀɦw¸Ë"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "½Ðµy«á¡A°õ¦æ ttmkfdir µ{¦¡¤¤..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type ¦rÅé¦w¸Ë§¹¦¨"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "¦r«¬Âà´«"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf ¦r«¬Âà´«"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm ¦r«¬Âà´«"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "¤£§R°£¼È®ÉÀÉ®×"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "­«·s±Ò°Ê XFS ªA°È"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "¤£§R°£¦r«¬ÀÉ"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"¶i¦æ¦w¸Ë¦r«¬«e¡A½Ð°È¥²½T»{±z¦³¾A·íªºÅv­­¯à°÷¦s¨ú¨Ï¥Î¡A\n"
-"¨ä¤¤¥]§t³o¨Ç¦r«¬³£¬O¥¿½T¨S¿ù»~ªº¡C­n¤£µM¡A·¥ºÝ±¡ªp¤U¡A\n"
-"±zªº X ¦øªA¾¹¥i¯à·|¦]¬°¤£¥¿½Tªº¦r«¬ÀɮצӤ£¹w´Áµ²§ô¡C"
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "¦r«¬¶×¤J"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "¦w¸ËWindows¦r«¬"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "²¾°£¦r«¬"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "¶i¶¥¿ï¶µ"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "¦r«¬²M³æ"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "¿ï¾Ü¯à°÷¨Ï¥Î¸Ó¦rÅ骺À³¥Îµ{¦¡¡G"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "GhostScript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "¤@¯ë¦Lªí¾÷"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "¿ï¨ú¦rÅéÀɮסA©ÎªÌ¬O©Ò¦b¥Ø¿ý¡AÂI¿ï«á«ö¤U '¥[¤J'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "¦w¸Ë²M³æ"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "½T©wªº¸Ü½ÐÂI¿ï³o¸Ì"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "¤£½T©wÂI¿ï³o¸Ì"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "¨ú®ø¿ï¨ú©Ò¦³¶µ¥Ø"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "¿ï¨ú©Ò¦³¶µ¥Ø"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "²¾°£²M³æ"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "ªì©l´ú¸Õ"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "½Æ»s¦rÅé¦Ü¨t²Î"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "¦w¸Ë»PÂà´«¦rÅé"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "«áÄò¦w¸Ë³]©w"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "¥Ñ±zªº¨t²Î²¾°£¸Ó¦rÅéÀÉ®×"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "«áÄò¤Ï¦w¸Ë³]©w"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internet ³s½u¤À¨É"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internet ³s½u¤À¨É¥Ø«e³B©ó¥i¥Îª¬ºA"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"¥Ø«e Internet ³s½u¤À¨Éªº³]©w¤w¸g§¹¦¨¤F.. ¥Ø«e¤w¸g¥i¥Î¤F..\n"
-"±z¥Ø«e¥´ºâ­n°µ¤°»ò©O¡H"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "Ãö³¬"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "¨ú®ø"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "­«·s³]©w"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "¥¿¦bÃö³¬¦øªA¾¹..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internet ³s½u¦@¨É¥Ø«eÃö³¬¤F¡C"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internet ³s½u¦@¨É¥Ø«eÃö³¬¤F¡C"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internet ³s½u¦@¨É¤w¸g³]©w§¹¦¨¤F¡C¥Ø«e¬O³B©óÃö³¬¤£¨Ï¥Îª¬ºA¡C\n"
-"\n"
-"±z§Æ±æ­n³B²z¨º­Ó¡H"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "¶}±Ò"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "¶}±Ò¦øªA¾¹¤¤..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internet ³s½u¤u·Q¥Ø«e¶}±Ò¤F¡C"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"¥Ø«e­n¶i¦æInternet³s½u¤À¨Éªº³]©w¡A³o­Ó¥\¯à¯à°÷\n"
-"Åý¨ä¥L°Ï°ìºô¸ô¤ºªº¹q¸£³z¹L³o¥x¥D¾÷ªºÀW¼e¤À¨É\n"
-"³s¤W Internet¡C½Ðª`·N: ±z»Ý­n¥t¥~¤@±iºô¸ô¥d¥H«K\n"
-"©ó´£¨Ñ°Ï°ìºô¸ô¹q¸£³s½u¦s¨ú¤À¨É¨Ï¥Î¡C"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "¤¶­± %s (¨Ï¥Î %s ¼Ò²Õ)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "¤¶­± %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "±z¨t²Î¨Ã¨S¦³ºô¸ô¥d¦s¦b"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr "±z¨t²Î°»´ú¤£¨ì¦³ºô¸ô¥dªº¦s¦b¡A½Ð­«·s°õ¦æµwÅé³]©w¤u¨ã¡C"
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "ºô¸ô¤¶­±"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"±zªº¨t²Î¥Ø«e¦³¤@±i¤w¸g³]©w¦nªººô¸ô¥d:\n"
-"\n"
-"%s\n"
-"\n"
-"²{¦b­n¶i¦æ³o±iºô¸ô¥d»P°Ï°ìºô¸ôªº³s½u²ÕºA³]©w¡C"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "½Ð¿ï¾Ü­n³s½u¨ì°Ï°ìºô¸ô¤ºªººô¸ô¥d¡C"
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "ºô¸ô¤¶­±¤w¸g³]©w§¹¦¨"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"ĵ§i¡A¨t²Îºô¸ô¥d¤¶­± (%s) ¤w¸g³]©w¹L¤F¡C\n"
-"\n"
-"±z½T©w­n¦Û°Ê­«·s³]©w¹L¡H\n"
-"\n"
-"¦pªG±z¦³¯S®í»Ý¨D¡A¥i¥H¿ï¾Ü¤â°Ê¤è¦¡³]©w¡C"
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "¦Û°Ê­«·s³]©w"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Åã¥Ü¥Ø«eºô¸ô¤¶­±²ÕºA³]©w"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"¥Ø«e '%s' ªº²ÕºA³]©w:\n"
-"\n"
-"ºô¸ô: %s\n"
-"IP ¦ì§}: %s\n"
-"IP ÄÝ©Ê: %s\n"
-"ÅX°Êµ{¦¡: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"³]©wµ{¦¡¤w¸g¬ö¿ý¤F¥Ø«eªº²ÕºA³]©w¸ê°T¡A¨Ã°²³]±z¤w¸g³]©w¦n¤F\n"
-"DHCP ªA°È¡F±µ¤U¨Ó½Ð½T»{³]©wµ{¦¡¯à°÷¥¿½T¨úªº±z°Ï°ìºô¸ô¸ê°T¡F\n"
-"¦pªG³]©wµ{¦¡µLªk¥¿½T¨ú±o DHCP ªA°È²ÕºAªº¸Ü¡A¬ÛÃö³]©w±N¤£·|Ä~Äò¡C\n"
-"\n"
-"¨S°ÝÃDªº¸Ü¡A¦w¸Ëµ{¦¡±N·|­«·s³]©w±zªººô¸ô¤¶­±¡A³]©w¥Ñ DHCP ¥D¾÷\n"
-"¨ú±oIP¸ê°T¡C\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C µ¥¯Åªº°Ï°ìºô¸ô"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "¸Ó DHCP ¥D¾÷ IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "­«·s³]©w¸Óºô¸ô¤¶­±»P DHCP ¦øªA¾¹"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "¸Ó°Ï°ìºô¸ô¨Ã¤£¬O¥H .0 µ²§À¡A©ñ±ó..."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Potential LAN ¦ì§}»P¥Ø«e¦b %s §ä¨ìªº³]©w¤¬½Ä¬ð!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "¨¾¤õÀð³]©w¤w¸g°»´ú¨ì¤F!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"ĵ§i ! °»´ú¨ì²{¦³¤w¸g¦s¦bªº¨¾¤õÀð²ÕºA³]©w¡C\n"
-"±zÀ³¸Ó¦b¦w¸Ë¤§«á¤â°Ê­×¥¿¤@¨Ç¥²­nªº³]©w¶µ¥Ø¡C"
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "³]©w¤¤..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "³]©w script, ¦w¸Ë³nÅé¡A±Ò°Ê¬ÛÃöªº servers ªA°È"
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "¦w¸Ë %s ®M¥óµo¥Í¿ù»~"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"¨C­Ó¶µ¥Ø³£¤w¸g³]©w¦n¤F¡C\n"
-"²{¦b±zªº¨t²Î¤w¸g³z¹L DHCP °ÊºA IP ¤À°tªº¤è¦¡¨ú±o³s½u IP¡A\n"
-"¨Ã¥B¤]¤w¸g¯à°÷³z¹L¨ä¥L¹q¸£ªºÀW¼e¤À¨É¦s¨ú Internet ªA°È¡C"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "³o­Ó³]©w¥ý«e¤w¸g§¹¦¨¤F¡A¤£¹L¥Ø«e¬O³B²zÃö³¬¨S±Ò¥Îªºª¬ºA"
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "³o­Ó³]©w¥ý«e¤w¸g§¹¦¨¤F¡A¥Ø«e¬O³B²z¶}±Ò¥i¥Îªºª¬ºA"
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internet ³s½u¤À¨É©|¥¼³]©w¡C"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Internet ³s½u¤À¨É³]©w"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Åwªï¨Ó¨ì Internet ³s½u¤À¨É³]©w¤u¨ã¡I\n"
-"\n"
-"%s\n"
-"\n"
-"ÂI¿ï³]©w¨Ó±Ò°Ê³]©wºëÆF¡C"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ºô¸ô²ÕºA (%d ¤¶­±¥d)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "³]©wÀÉ¡G"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "§R°£³]©wÀɤ¤..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "­n§R°£¨º­Ó³]©wÀÉ¡G"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "·s³]©wÀÉ ..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "­n«Ø¥ßªº³]©wÀɦWºÙ (·sªº³]©wÀÉ·|¥ý¥Ñ¥Ø«eªº³]©wÀɽƻs¤º®e¹L¨Ó)¡G"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "¥D¾÷¦WºÙ¡G"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet ¦s¨ú"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "®æ¦¡¡G"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "¹h¹D¾¹¡G"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "¤¶­±¡G"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "ª¬ºA¡G"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "½Ðµy«á"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "³]©w internet ¦s¨ú"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "°Ï°ìºô¸ô³]©w"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "ÅX°Êµ{¦¡"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "¤¶­±"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "³q°T¨ó©w"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "ª¬ºA"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "³]©w°Ï°ìºô¸ô..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "ÂI¿ï³o¸Ì±Ò°Ê³]©wºëÆF ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "ºëÆF..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "®M¥Î"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "½Ðµy«Ý... ¥¿¦b®M¥Î¸Ó³]©w"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "¤w³s½u"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "©|¥¼³s½u"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "³s½u..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Â_½u..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "ĵ§i¡A°»´ú¨ì±z¨t²Î¤w¸g¦³²{¦¨ªººô¸ô³s½u¡A¤]³\¥¿¦b¦s¨ú±zªººô¸ôªA°È"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"±zÁÙ¨S¦³¥ô¦ó¤w¸g³]©w¦nªººô¸ô¤¶­±¡C\n"
-"½ÐÂI¿ï³]©w¨Ó¶i¦æºô¸ô¤¶­±³]©w°Ê§@"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "°Ï°ìºô¸ô³]©w"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "¤¶­±¥d %s¡G %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "³q°T¨ó©w"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "©ó¶}¾÷®É±Ò°Ê"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP ¥Î¤áºÝ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "¥ß§Y±Ò°Ê"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "¥ß§YÃö³¬"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr "ºô¸ô¤¶­±©|¥¼³]©w¡A½Ð°õ¦æ³]©wºëÆF"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"±zÁÙ¨S¦³¥ô¦ó Internet ³s½u³]©w¡C½Ð¥ýÂI¿ï\n"
-"³]©w«ö¶s¨Ó«Ø¥ß¤@­Ó Internet ³s½u³]©w¤º®e"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internet ³s½u³]©w"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internet ³s½u³]©w"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "³s½u¶µ¥Ø¡G"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "°Ñ¼Æ"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "¹h¹D"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Etnernet ¤¶­±¥d"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP ¥Î¤áºÝ"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "³]©w¦w¥þµ¥¯Å"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "±±¨î¤¤¤ß"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "¿ï¨ú±z·Q¨Ï¥Îªº¤u¨ã"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "¥[®³¤j (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "¬ü°ê (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "¬ü°ê (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "¬ü°ê (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "¤¤°ê (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "¤é¥»  (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "¤é¥» (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "ªF¼Ú"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "·Rº¸Äõ"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "¦è¼Ú"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "¿D¤j§Q¨È"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "¤¦³Á"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "«n«D"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "ªü®Ú§Ê"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "°Ï°ì¡G"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "·Ç³Æ¶}©l±½´y¹qµøÀW¹D"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "¥¿¦b±½´y¹qµøÀW¹D"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "usage¡G keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "½Ð¿ï¨úÁä½L±Æ¦Cªº®æ¦¡¬O¨º¤@ºØ¡C"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "±z§Æ±æ BackSpace «á°hÁä¯à°÷¦b console ¤U¦^À³ Delete «öÁ䪺¥\¯à¶Ü¡H"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "§ó´«¥úºÐ¤ù"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"½Ð©ñ¤J¦w¸Ë CD ¥úºÐ¤ù¡AµM«á«ö¤U¡y½T©w¡z«ö¶sÄ~Äò¦w¸Ë¡C¦pªG±z¨Ã¨S¦³³o¤ù\n"
-"¥úºÐ¤ùªº¸Ü¡A½Ð«ö¤U¨ú®ø«ö¶s¥HÁקK±Ò°Ê½u¤W¤É¯Åªºµ{¦¡¡C"
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "µLªk±Ò°Ê½u¤W§ó·sµ{¦¡ !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Åܧó¤w¸g§¹¦¨¡A¤£¹L±z»Ý­n­«·sµn¤J¤~¯à°÷¥Í®Ä"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "¶ÈÅã¥Ü©Ò¿ï¨ú¤é´Á¶µ¥Ø"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/ÀÉ®× (F)/·s¼W (_N)"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/ÀÉ®× (F)/¶}±Ò (_O)"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/ÀÉ®× (F)/Àx¦s (_S)"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/ÀÉ®× (F)/¥t¦s·sÀÉ (_A)"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/ÀÉ®× (F)/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/¿ï¶µ (_O)"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/¿ï¶µ (O)/´ú¸Õ"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/»¡©ú (_H)"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/»¡©ú (H)/Ãö©ó (_A)..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "User (¨Ï¥ÎªÌ)"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messages (°T®§)"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog (¨t²Î°O¿ý)"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake ¤u¨ã¸ÑªR"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "´M§ä"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "ºÊ¹î°O¿ýÀɪº¤u¨ã"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "³]©w"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "¬Û°tªº"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "¦ý¬O¤£¬Û°t"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "¿ï¨úÀÉ®×"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "¦æ¨Æ¾ä"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Àɮתº¤º®e"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "¶l¥ó/²°Tĵ¥Ü"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "½Ðµy­Ô¡A¥¿¦b¸ÑªRÀɮסG%s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "¶l¥ó/²°T ĵ¥Ü³qª¾²ÕºA³]©w"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Åwªï¨Ó¨ì¡y¶l¥ó/²°T¡z³]©w¤u¨ã¡C\n"
-"\n"
-"¦b³o¸Ì¡A±z¯à°÷³]©w±zªºÄµ¥Ü³qª¾ªº¤è¦¡¡C\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "ªA°È³]©w"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "­Y¬O±z©Ò¿ï¨úªºªA°È¶µ¥Ø­Y¬O¨S°õ¦æªº¸Ü¡A±z±N·|¦¬¨ìĵ¥Ü³qª¾"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "¸ü¤J³]©w"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "·í¨t²Î­t¸ü¶W¹L¸Ó¼Æ­È®É¡A±z±N·|¦¬¨ìĵ¥Ü³qª¾"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "ĵ¥Ü³]©w"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "³]©w¨t²Î³qª¾Äµ¥Üªº¤è¦¡"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "¥t¦s·sÀÉ..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "½Ð¿ï¨ú·Æ¹«ªº§Î¦¡¡C"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "§ä¤£¨ì§Ç¦C usb °ð\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "¼ÒÀÀ¤TÁä·Æ¹«ªº¥\¯à ¡H"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "§ä¨ì¤F %s ¸Ë¸m (©ó %s)¡A²{¦b­n³]©w¶Ü¡H"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "¿ï¨ú±zªº±½´y¾¹"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "¥Ø«eÁÙ¤£¤ä´©³o´Ú %s ±½´y¾¹"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "¶}¾÷¸Ë¸m"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"³o¥x %s ±½´y¾¹»Ý­n¥ý°õ¦æ printerdrake µ{¦¡¶i¦æ³]©w¡C\n"
-"±z¥i¥H³z¹L Mandrake ±±¨î¥x¤ºªºµwÅ鶵¥Ø¤º°õ¦æ¸Óµ{¦¡¡C"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "¨¾¤õÀð³]©w"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "¨¾¤õÀð³]©w"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"±z¤w¸g³]©w¹L¨¾¤õÀ𪺾÷¨î¤F¡C\n"
-"½ÐÂI¿ï³]©w¨Ó§ïÅܤº®e²ÕºA¡A©ÎªÌ¬O¿ï¾Ü²¾°£§â­ì¥»³]©w§R°£"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"¨¾¤õÀð\n"
-"\n"
-"ÂI¿ï¨¾¤õÀð¨Ó³]©w²£¥Í¤@­Ó¼Ð·Çªº¨¾¤õÀð¨¾Å@¥\¯à"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "¿ï¾Ü»y¨t"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "¿ï¾Ü¦w¸Ë¼Ò¦¡"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "µwºÐ°»´ú"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "³]©w·Æ¹«"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "¿ï¨úÁä½L§Î¦¡"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "¦w¥þ©Ê³]©w"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "³]©wÀɮרt²Î"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "µwºÐ®æ¦¡¤Æ"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "¿ï¨úµ{¦¡®M¥ó"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "¦w¸Ë¨t²Î"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "·s¼W¨Ï¥ÎªÌ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "³]©wºô¸ô³s½u"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "³]©w¨t²ÎªA°È"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "¦w¸Ë¶}¾÷µ{¦¡"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "»s§@¶}¾÷ºÏ¤ù"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "³]©w X Àô¹Ò"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "¦w¸Ë¨t²Î§ó·s"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Â÷¶}¦w¸Ëµ{¦¡"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Åwªï¨Ó¨ì»´¶q«¬¨¾¤õÀð³]©wµ{¦¡\n"
-"\n"
-"³o¬O¥Î¨Ó³]©wMandrake-Linux¾÷¾¹¤Wªº­Ó¤H¨¾¤õÀ𪺲պA¡A\n"
-"¯à°÷¨ó§U±z§¹¦¨Â²©öªº¨¾¤õÀð³]©w¡C\n"
-"\n"
-"­Y¬O±z»Ý­n«Ü§¹³Æ±j¤jªº¨¾¤õÀð¸Ñ¨M¤è®×¡A±z¥i¥H°Ñ¾\\n"
-"¡yMandrakeSecurity Firewall distribution¡z²£«~¸ê°T¡C"
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to.  Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off.  You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"¤U­±§Ú­Ì±N·|¶i¦æ¤@¨Ç°ÝÃDªº¸ß°Ý¡A¹³¬O¤¹³\¶}©ñ¨º¨ÇªA°È¯àÅý\n"
-"¥~­±¯à°÷¦s¨ú¨ì¡C½Ð¥J²ÓªºÆ[¬Ý¤U­±ªº¤@¨Ç°ÝÃD¡A¦]¬°³oÃö«Y©ó\n"
-"±z¹q¸£ªººô¸ô¦w¥þ°ÝÃD\n"
-"\n"
-"½Ðª`·N¤@¤U¡A¦pªG±z¨Ã¨S¦³­n¨Ï¥Î³o¨ÇªA°È¡A¨¾¤õÀð³]©w¥i¥HÃö³¬¡C\n"
-"­Y¬O±z©¹«á¦³³]©w»Ý­n¡A¦A°õ¦æ³]©wµ{¦¡¶i¦æ½Õ¾ã¡C"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"±z¥´ºâÅý³o¥x¦øªA¾¹¦¨¬° Web ¦øªA¾¹¶Ü¡H\n"
-"\n"
-"­Y¬O§A³o¥x¾÷¾¹¨Ã¤£¥´ºâ¥Î¨Ó©ñ¸mºô­¶ÀɮסA\n"
-"µM«á´£¨Ñ¥L¤H¯à°÷³z¹LÂsÄý¾¹ÂsÄý¦s¨úªº¸Ü¡A\n"
-"³o¸Ì±z¥i¥H¿ï¾Ü¡y§_¡z¡C\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"±z¥´ºâÅý³o¥x¦øªA¾¹¦¨¬° DNS ¦øªA¾¹¶Ü¡H\n"
-"\n"
-"­Y¬O±z¤£¥´ºâ¦b¥D¾÷¤W¬[³] Domain Name Server\n"
-"´£¨Ñ¡uIP¡v»P¡u¥D¾÷¦WºÙ¡v¸ÑªRªA°Èªº¸Ü¡A\n"
-"½Ð¿ï¾Ü¡y§_¡z¡C\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"±z§Æ±æ¯à°÷¤¹³\¡uSecure Shell - ssh ¡v»·ºÝµn¤Jªº³s½uªA°È¶Ü¡H\n"
-"\n"
-"¡ussh¡v¬O¤@­Ó¥Î¨Ó¨ú¥N¡utelnet¡vªº³s½uµ{¦¡¡A»P¡utelnet¡vµ{¦¡\n"
-"ªº®t²§©Ê¦b©ó¨Ï¥Î¡ussh¡v³s½u¹Lµ{¤¤©Ò¦³ªº¶Ç¿é¤º®e³£·|¥[±K¡C\n"
-"\n"
-"©Ò¥H§Ú­Ì«Øij­Y¬O§A­ì¥»¦³¥´ºâ¶}©ñ¡utelnet »·ºÝµn¤JªA°È¡v\n"
-"ªº¸Ü¡A¥i¥H¦Ò¼{§ï¥Î¡ussh¡v¨ú¥N­ì¥»¡utelnet¡vªº¨Ï¥Î¡C\n"
-"\n"
-"·í¨Ï¥Î¡ussh¡v«á¡A¦]¬°¾ã­Óºô¸ô¶Ç¿é¤º®e³£¬O¥[±K¹Lªº¡A¦]¦¹\n"
-"¦³¤ß¤H¤hµLªk»´©öªºÅѨúºô¸ô¶Ç¿é¤¤ªº¤º®e¡A¦p¦¹ºô¸ô§@·~\n"
-"Àô¹Ò·|§ó¥[¦w¥þ¡C"
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"±z§Æ±æ¯à°÷¤¹³\ telnet »·ºÝµn¤Jªº³s½uªA°È¶Ü¡H\n"
-"\n"
-"¶}©ñ¡utelnet¡v»·ºÝµn¤J¥\¯à¬O¬Û·í¤£¦w¥þªº¡A¦b¥ý«eªº\n"
-"¿Ã¹õµe­±¤¤§Ú­Ì¤w¸g´£¤Î¹L¤F¡C\n"
-"\n"
-"¦]¦¹§Ú­Ì«Øij±z³oÃ䤣­n¿ï¾Ü¶}©ñ¡utelnet»·ºÝµn¤J¡v\n"
-"ªºªA°È¡A§ï¥Î¡ussh¡v³oÃþ¦³¦w¥þ¥[±Kªº»·ºÝµn¤Jµ{¦¡·|\n"
-"¤ñ¸û¦w¥þ¡C\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"±z¥´ºâÅý³o¥x¦øªA¾¹¦¨¬° FTP ¥D¾÷¨Ã¥B´£¨Ñ¥~¨Ó Internet \n"
-"ªº¦s¨ú¶Ü¡H\n"
-"\n"
-"¦pªG¬Oªº¸Ü¡A¤@¯ë§Ú­Ì«Øij±z¥u¶}©ñ¡uanonymous °Î¦W¨Ï¥ÎªÌ¡v\n"
-"µn¤J¨Ï¥Î¸û¨Î¡C\n"
-"\n"
-"¦]¬°­Y¬O¶}©ñ¤¹³\¯u¹ê±b¸¹µn¤J¦s¨úªº¸Ü¡A¦]¬°ºô¸ô¶Ç¿é¤º®e\n"
-"³£¬O¥¼¸g¹L¥[±Kªº¡A©Ò¥Hµn¤J®É©Ò¿é¤Jªº±K½X´N«Ü¦³¥i¯à³Q¦³\n"
-"¦³¤H¤hºÊÅ¥¨ì¡C\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are.  Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"±z¥´ºâÅý³o¥x¦øªA¾¹¦¨¬°¶l¥ó¦øªA¾¹¶Ü¡H\n"
-"\n"
-"¦pªG§A§Æ±æ¨Ï¥Î¡upine¡v¡B¡umutt¡v©ÎªÌ¬O¤@¨Ç\n"
-"¤å¦r¼Ò¦¡ªºÅª«H³nÅ馬µomail ªº¸Ü¡A¨º´NÀ³¸Ó¬O¤F¡C\n"
-"­n¤£µM¡A§AÀ³¸Ó³]©w§â³o­Ó firewall ³]©wÃö³¬¡C\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"±z³o¥x¦øªA¾¹¦³­n¶] POP ©ÎªÌ¬O IMAP ³oÃþªA°È¶Ü¡H\n"
-"\n"
-"³o¨ÇªA°È¯à°÷Åý³o¥x¦³±b¸¹ªº¨Ï¥ÎªÌ¯à°÷¨Ï¥Î¤@¨Ç\n"
-"¶l¥ó³nÅé¦s¨ú³o¥x¥D¾÷¤Wªº­Ó¤H«H¥ó¡C\n"
-"\n"
-"­Y¬O±z¥D¾÷¤£´£¨Ñ POP¡BIMAP ³oÃþ«H¥ó»·ºÝ¦s¨úªA°È\n"
-"ªº¸Ü¡A¨ºÀ³¸Ó¿ï¾Ü¡u§_¡v¡C\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel.  If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this.  Is\n"
-"this the case?\n"
-msgstr ""
-"±z¥Ø«e¨t²Î¦ü¥G¬O¨Ï¥Î kernel 2.2 ªºª©¥»¡C\n"
-"\n"
-"¦pªG±z¹q¸£ IP ¬O¥ÑDHCP µ¥µ¥³oÃþ¦øªA¾¹¤À°tµ¹±zªº¡A\n"
-"§Ú­Ì´N»Ý­n¤¹³\³o­Ó¶µ¥Ø¡C¨º¥Ø«e¬O³o­Ó±¡ªp¶Ü¡H\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such.  If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"±z­n³]©wÅý±zªº¹q¸£¨t²Î®É¶¡»P¥t¥~¤@¥x¹q¸£¦P¨B¹ï®É¶Ü¡H\n"
-"\n"
-"¤@¯ë¨Ó»¡¡A³o¹ï©ó±z¨t²Î­Y¬O·í¤@­Ó¦øªA¾¹´£¨Ñ¹B§@¡AµM«á¦³\n"
-"log µ¥³oÃþ¬ö¿ýªº¸Ü¡A¨t²Î®É¶¡ªº¥¿½T©Ê´N¬Û·í­«­n¡C\n"
-"­Y¬O±z¹q¸£¬O¤@¯ë®à¤W«¬ªº¥Î³~¡A³o­Ó¶µ¥Ø±z¤]³\´N¤£¬O\n"
-"¬Û·í»Ý­n¡C"
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete.  May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"³]©w¤w¸g§¹¦¨¡C\n"
-"\n"
-"±z­n§â³o¨ÇÅܧó¼g¤JºÏºÐ¶Ü¡H\n"
-"\n"
-"­Y¬O¤£¥´ºâÀx¦s¡A½Ð¿ï¾Ü¡y¤£Àx¦s¡z¡C\n"
-"­Y¬O±z­n±N³]©wªº²ÕºAÀx¦s°_¨Ó¡A½Ð¿ï¾Ü\n"
-"¡yÀx¦s¨Ãµ²§ô¡z¡C©ÎªÌ¬O¿ï¾Ü¡y¤W¤@¨B¡z\n"
-"­«·sÀ˵ø³]©w¶µ¥Ø¡C\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "µLªk¶}±Ò %s ÀɮסG %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "¹ï %s Àɮ׶i¦æ¼g¤J®Éµo¥Í¿ù»~¡G %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "§_¡A§Ú¤£»Ý­n DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "¬Oªº¡A§Ú»Ý­n DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "§_¡A§Ú¤£»Ý­n NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "¬Oªº¡A§Ú»Ý­n NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "¤£Àx¦s"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Àx¦s¨Ãµ²§ô"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "¨¾¤õÀð³]©wºëÆF"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "§_ (³]©w¨¾¤õÀð²ÕºAªýÄd¸ÓªA°È)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "¬O (³]©w©w¨¾¤õÀð²ÕºA¤¹³\¸ÓªA°È)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "½Ðµy«á... À˵ø¤w¦w¸Ëªº®M¥óµ{¦¡"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"¦w¸Ë¤U­±¥²³Æªº®M¥ó®Éµo¥Í¿ù»~¡G%s »P Bastille¡C\n"
-" ½Ð¤â°Ê¦w¸Ë¤W³o¨Ç®M¥ó¡C"
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "¥Î¤áºÝºô¸ôÀô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server¡BSMB server¡BProxy server¡BSsh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office ³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Àô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm¡BVisor ¬ÛÃö¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "¤u§@¯¸¥­¥x"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "¨¾¤õÀð/¸ô¥Ñ¾¹"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "DNS »P NIS ¦øªA¾¹"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"¿ì¤½³nÅé¡G ¤å®Ñ³B²z³nÅé (kword¡Babiword), ¸Õºâªí (kspread¡Bgnumeric), pdf ¾\"
-"Ūµ{¦¡µ¥µ¥"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "»PÁn­µ¡B­µ®Ä¦³Ãöªº¤u¨ã¡G mp3¡Bmidi¡Bmixer µ¥¬ÛÃöµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linux ¨t²Î»P¤@¨Ç§K¶O³nÅ骺®ÑÄy¡BHOWTO ¤å¥ó"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Àô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, µ¥µ¥ºÞ²zµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "¦h´CÅé - ¼v¹³"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "mail¡Bnews¡Bweb¡Bftp client »P chat µ¥¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "¸ê®Æ®w³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL¡BMySQL ¸ê®Æ®w"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Åý±z¤è«K³]©w±z¨t²Îªº¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "¦h´CÅé - ­µ®Ä"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "µ{¦¡¤u¨ã®w"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "¤å¥óÀÉ®×"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Console ¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix MTA ³nÅé¡BINN ·s»D¸s²Õ³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet ¥­¥x"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "¦h´CÅ饭¥x"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "²ÕºA³]©w"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "§ó¦h¹Ï§Î¤Æªº®à­±ºÞ²zµ{¦¡ (Gnome¡BICEWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE (The K Desktop Environment) ¹Ï§Î¤¶­±Àô¹Ò¡A¥]§t³\¦h¦n¥Îªº¹Ï«¬¤¶­±¤u¨ãµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "¹Ï§Î¤¶­±Àô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache¡BProFTPD"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "«Ø¥ß»P¶i¦æ CD ¿N¿ýµ¥¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "¿ì¤½³nÅ饭¥x"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "¦øªA¾¹¥­¥x"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome¡BIcewm¡B Window Maker¡BEnlightenment¡BFvwm µ¥µ¥¶µ¥Ø"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "gimp µ¥Ã¸¹Ï³nÅéµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS ªA°È"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C/C++ µo®iÀô¹Ò¡A¥]§t½sĶ¾¹¡Bµ{¦¡®w»P¤Î¤@¨Ç¤Þ¤JÀÉ®×"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "ºô¸ô¦øªA¾¹"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "¶l¥ó/¸s²Õ³nÅé/·s»D¸s²Õ"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "¹CÀ¸¥­¥x"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "¼v¹³¼·©ñµ{¦¡¥H¤Î½s¿èµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "¦h´CÅé - ø¹Ï"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "®T¼Öªº¤@¨Çµ{¦¡¡G ¯ÈµP¡B¯q´¼¡B°Ê§@¡Bµ¦²¤ µ¥"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"¥]§tŪ«H¡B¼g«H¥H¤Î¾\Ūºô¸ô½×¾Âªº¤u¨ã (pine¡Bmutt¡Btin ..) »P¤Î web ÂsÄý¤u¨ã"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "ÀÉ®×À£ÁYµ{¦¡, ¼ÒÀÀ¾¹, ºÊµø³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "­Ó¤H²z°]"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "¥]§t¤Íµ½ªºÀ³¥Îµ{¦¡¡B®à­±³nÅ骺¹Ï«¬¤Æ¨Ï¥ÎÀô¹Ò"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "¥]§t ssh µ¥¨ä¥L¤£¦P³q°T¨ó©wªº¥Î¤áºÝµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet ¹h¹D¾¹"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "­µ®Ä¥H¤Î¼v¹³¼·©ñ½s¿èµ{¦¡"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "¨ä¥L¹Ï«¬®à­±³nÅé"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "½s¿è¾¹, shell, Àɮפu¨ã, ²×ºÝ¾÷"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "¨ÓºÞ²z±z°]°Èª÷¿úªº¤u¨ã¡A¤ñ¤è¹³¬O gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "­Ó¤H¸ê°TºÞ²z"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "¦h´CÅé - CD ¿N¿ý"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "¬ì¾Ç­pºâ¥­¥x"
-
-#~ msgid "About"
-#~ msgstr "Ãö©ó"
-
-#~ msgid "             Help           "
-#~ msgstr "             ¨D§U           "
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "XavTV ©|¥¼¦w¸Ë...\n"
-#~ "±zÀ³¸Ó¥ý¦w¸Ë¤W¸Ó®M¥ó¡C\n"
-#~ "¦w¸Ë¤è¦¡¡A°õ¦æ¡Gurpmi xawtv"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr "µLªk¦s¨ú±z¥Ø«e¨t²Îªº®Ö¤ß¼Ò²ÕÀÉ®× (§ä¤£¨ì %s ÀÉ®×)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "µL"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "½Ð¿ï¨ú¹w³]ªº¦Lªí¾÷!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "®M¥Î/­«Åª¦Lªí¾÷²M³æ"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "±z²{¦b¥i¥H¿é¤J­nµ¹ %s ¼Ò²Õ¨Ï¥Îªº°Ñ¼Æ¡C"
-
-#~ msgid "mount failed"
-#~ msgstr "±¾¸ü¥¢±Ñ"
-
-#~ msgid "Low"
-#~ msgstr "§C"
-
-#~ msgid "Medium"
-#~ msgstr "¤¤"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "³o­Óµ{«×ªº¦w¥þ¾÷¨î³]©w¤S°µ¤F¨Ç·Lªº§ïµ½¡A\n"
-#~ "¥D­nªº¤@ÂI¬OÅýµ{¦¡²£¥Í§ó¦h»P¨t²Î¦w¥þ©Ê¬ÛÃö\n"
-#~ "ªºÄµ§i¡A¨Ã§@§ó¦hªºÀˬd¡C"
-
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "­nÀò±o¥Ø«e³o¥x¦Lªí¾÷¥i¥Îªº¬ÛÃö°Ñ¼Æ¿ï¶µ¡A½ÐÂI¿ï \"¦C¦L¿ï¶µ²M³æ\" \n"
-#~ "«ö¶s¡C%s\n"
-
-#~ msgid "Boot mode"
-#~ msgstr "¶}¾÷¼Ò¦¡"
-
-#~ msgid "click here"
-#~ msgstr "ÂI¿ï³o¸Ì"
-
-#~ msgid ""
-#~ "This %s scanner uses parallel port, which is unsupported for the moment"
-#~ msgstr "³o¥x %s ±½´y¾¹¬O¨Ï¥Î¨Ã¦C°ð¸Ë¸m¡A¦ý¬O¥Ø«e©|¤£¤ä´©³o­Ó¸Ë¸m"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "¡uGNU/Linux¡v¨t²Î¤º³¡¨Ï¥Î GMT (®æªL«Âªv®É¶¡)¡AµM«á¨Ì·Ó±z©Ò³]©wªº\n"
-#~ "®É°Ï¶µ¥Ø§â®É¶¡Âà´«¦¨¬°±z¥»¦aºÝ©ÒÅã¥Ü¨Ï¥Îªº®É¶¡¡C"
-
-#~ msgid ""
-#~ "You may choose to upload updated packages that have been released after "
-#~ "the\n"
-#~ "distribution has been made available. You will get security fixes or bug\n"
-#~ "fixes, but you need to have an Internet connection configured to "
-#~ "proceed.\n"
-#~ "Answer \"Yes\" to the dialog to choose an available mirror. After "
-#~ "choosing\n"
-#~ "a mirror, a packages selection tree appears to allow you to choose "
-#~ "packages\n"
-#~ "individually, package that need to be updated are already selected, but "
-#~ "you\n"
-#~ "may choose to install other package or deselect packages. Press \"Install"
-#~ "\"\n"
-#~ "to install the updated package or \"Cancel\" not to upgrade them. (this\n"
-#~ "*REALLY* need to be modified according to real DrakX, if you need other\n"
-#~ "help section, let us (DrakX team developer) known)."
-#~ msgstr ""
-#~ "¦b¸Ó³]©w¶µ¥Ø¤º¡A±z¯à°÷³z¹Lºô¸ô³s½uªA°Èª½±µ©ó¦w¸Ë¹Lµ{¤¤³s½u¦Ü\n"
-#~ "¦w¥þ¡B¯äÂέץ¿¯¸¥x§ì¨ú³Ì·sªº§ó·s®M¥ó¡C©Ò¥H±z­n¶i¦æ§ó·s¨BÆJ¡A\n"
-#~ "±z»Ý­n¿ï¾Ü¤@­Ó mirror ¯¸¥x¥H«K©ó¶i¦æ§ó·sªº°Ê§@¡C¿ï¾Ü¦n¨Ã³s½u\n"
-#~ "§¹²¦«á¡A½Ð¿ï¾Ü \"¦w¸Ë\" ¨Ó§ó·s¦Ü³Ì·sªº­×¥¿®M¥ó¡A©ÎªÌ¬O¿ï¾Ü\n"
-#~ "\"¨ú®ø\"©ñ±ó§ó·s¡C"
-
-#~ msgid "Connect to Internet"
-#~ msgstr "³s½u¨ì Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "¤ÁÂ_ Internet ³s½u"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "³]©wºô¸ô³s½u¤è¦¡ (°Ï°ìºô¸ô©ÎªÌ¬O Internet)"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "°»´ú¨ì %s¡A±z²{¦b­n³]©w¸Ó¸Ë¸m¶Ü¡H"
-
-#~ msgid "Here is a list of all auto-detected printers. "
-#~ msgstr "¤U­±¦C¥X¤F¦Û°Ê°»´ú¨ìªº¦Lªí¾÷²M³æ¡C"
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "½Ð¿ï¨ú±z­n³]©wªº¦Lªí¾÷¶µ¥Ø¡C"
-
-#~ msgid ""
-#~ "Please choose the desired printer/printer port or enter a device name/"
-#~ "file name in the input line"
-#~ msgstr "½Ð¿ï¾Ü±z©Ò¹w´Áªº¦Lªí¾÷/¦Lªí¾÷³s±µ°ð¡A©ÎªÌ¬O¿é¤J¸Ó¸Ë¸mªº¦WºÙ"
-
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "½Ð¿ï¾Ü±z©Ò¹w´Áªº¦Lªí¾÷/¦Lªí¾÷³sµ²°ð¡C\n"
-
-#~ msgid "Infos"
-#~ msgstr "¸ê°T"
-
-#~ msgid "Windows Importation"
-#~ msgstr "Windows ¦r«¬¶×¤J"
-
-#~ msgid "authentification"
-#~ msgstr "»{ÃÒ"
-
-#~ msgid "user"
-#~ msgstr "¨Ï¥ÎªÌ"
-
-#~ msgid ""
-#~ "To access to more commercial informations, please contact us on the "
-#~ "following toll free:"
-#~ msgstr "­nÀò±o§ó¦h°Ó·~¸ê°T¡A½Ð¨Ï¥Î¤U­±ºÞ¹D»P§Ú­ÌÁpµ¸:"
-
-#~ msgid ""
-#~ "With remote CUPS servers, you do not have to configure any printer here; "
-#~ "CUPS servers inform your machine automatically about their printers. All "
-#~ "printers known to your machine currently are listed in the \"Default "
-#~ "printer\" field. Choose the default printer for your machine there and "
-#~ "click the \"Apply/Re-read printers\" button. Click the same button to "
-#~ "refresh the list (it can take up to 30 seconds after the start of CUPS "
-#~ "until all remote printers are visible). When your CUPS server is in a "
-#~ "different network, you have to give the CUPS server IP address and "
-#~ "optionally the port number to get the printer information from the "
-#~ "server, otherwise leave these fields blank."
-#~ msgstr ""
-#~ "·í¨Ï¥Î­ìºÝªº CUPS ¦C¦L¦øªA¾¹®É¡A±z¦b³oÃä¨Ã¤£»Ý­nÃB\n"
-#~ "¥~¶i¦æ³]©wªº°Ê§@¡A¦]¬° CUPS ¦C¦L¦øªA¾¹·|¦Û°Ê´£¨Ñ¬Û\n"
-#~ "Ãö¦Lªí¾÷³]©wÀô¹Ò¡C¥Ø«e±z¹q¸£©Ò¦³¤wª¾¥i¥Îªº¦Lªí¾÷³£\n"
-#~ "¦C©ó \"¹w³]¦Lªí¾÷\" Äæ¦ì¸Ì­±¡C\n"
-#~ "\n"
-#~ "½Ð¿ï¾Ü±z¹q¸£©Ò­n¨Ï¥Îªº¹w³]¦Lªí¾÷¶µ¥Ø¡AµM«áÂI¿ï\n"
-#~ "\"®M¥Î/­«Åª¦Lªí¾÷²M³æ\" «ö¶s¡CÂI¿ï¬Û¦Pªº«ö¶s¤]¯à°÷\n"
-#~ "§ó·s²M³æ¤ºªº¶µ¥Ø(¦b±Ò°Ê CUPS ªA°È«á¡A±z¦Aµ¥«Ý 30 \n"
-#~ "¬í«á¡A«K¯à°÷¬Ý¨ì©Ò¦³»·ºÝ¥i¥Îªº¦Lªí¾÷²M³æ)¡C\n"
-#~ "·í±z­n¨Ï¥Îªº CUPS ¦C¦L¦øªA¾¹­Y¬O¦b¤£¦Pªººô¸ô¤W¡A\n"
-#~ "¨º±z´N»Ý­n«ü©w¸Ó¥x¦øªA¾¹¥D¾÷IP(¥i¯à»Ý­n«ü©w Port)¡A\n"
-#~ "¥H«K©ó¯à°÷¦s¨ú¦C¦L¦øªA¾¹ªº¸ê°T¡A­n¤£µM¸ÓÄæ¦ì\n"
-#~ "¥i¥H¤£¥Î¿é¤J¡C"
-
-#~ msgid "Configure printing system"
-#~ msgstr "³]©w¦C¦LªA°È¨t²Î"
diff --git a/perl-install/share/reload.png b/perl-install/share/reload.png
deleted file mode 100644
index 26d503283..000000000
--- a/perl-install/share/reload.png
+++ /dev/null
diff --git a/perl-install/share/rpmsrate b/perl-install/share/rpmsrate
deleted file mode 100644
index 0e96a750b..000000000
--- a/perl-install/share/rpmsrate
+++ /dev/null
@@ -1,571 +0,0 @@
-GRAPHICAL_DESKTOP
-  4 WindowMaker icewm
-  3 Epplets WMRack blackbox enlightenment ethemes icepref
-    wmakerconf xlockmore xfce
-  2 wmnet
-  2 GNOME
-  1 lesstif-mwm xbanner
-
-GNOME
-  5 gnome-panel nautilus
-  4 gnome-tiles gdm gnome-applets gnome-user-docs gtk-themes sawfish-themes
-    gnome-network gnome-utils xlockmore gtk-engines2 mdk-eazel-engine-capplet 
-    gnome-control-center gnome-vfs-extras sawfish yelp gconf-editor
-    gnome-terminal 
-  3 gnome-pilot
-  2 bug-buddy
-
-KDE
-  5 kdebase kdebase-nsplugins
-  5 kde-i18n-de kde-i18n-fr 
-  4 kdeaddutils kdeadmin kdegraphics kdemultimedia kdenetwork krozat
-    kdepim kdetoys kdeutils quanta 
-
-  2 kdesdk kdoc
-
-VIDEO
-  4 xine-ui xine-oss xine-xv powerdvd RealPlayer-mdk-cdcom
-  3 nist xanim xmms-smpeg xmovie 
-  2 mtv mtv-fullscreen-extension
-  1 bcast mpeg2_movie
-TV
-  4 zapping xawtv gatos
-  4 KDE kwintv
-
-OFFICE
-  4 staroffice-en staroffice-de staroffice-es staroffice-fr staroffice-it
-    acroread acroread-nppdf
-  4 cbb gaddr xpdf moneydance
-  3 wv ical pyDict
-  2 openoffice
-  2 units lyx
-  2 freegica-MDK-mdk-cdcom quasar-mdk-cdcom VShop-mdk-cdcom WXpaye-mdk-cdcom
-  GNOME
-    4 gnome-pim gnome-pim-conduits gnumeric mrproject
-    3 dia gnome-pilot-conduits Guppi
-    2 ggv gnucash
-  KDE
-    5 koffice
-    5 koffice-i18n-fr koffice-i18n-de
-    2 klyx
-
-SOUND
-  5 sox
-  4 aumix
-  4 KDE xmms-arts
-
-AUDIO
-  4 grip xmms xmms-skins
-  4 GNOME gnome-audio gnome-media
-  4 KDE kdelibs-sound
-  4 3D xmms-mesa
-  3 cdp cdparanoia cdrecord-cdda2wav space_sounds timidity-instruments xmms-esd
-    xmms-kjofol-skins xmms-more-vis-plugins eMusic
-  3 GNOME gnome-audio-extra 
-  2 mokmod mp3info mpg123 playmidi playmidi-X11 xmms-mikmod
-
-  4 HW"Rio 500" rio500 grio500
-
-ACCESSIBILITY
-  2 gtkeyboard
-
-PUBLISHING
-  5 enscript ghostscript-module-X
-  4 ghostscript-utils gv psutils texinfo nlpr
-  2 latex2html jadetex tetex-afm tetex-dvips tetex-latex tetex-xdvi tetex-latex-arab tetex-latex-heb docbook-dtd31-sgml
-  2 BOOKS tetex-doc
-  1 docbook-style-dsssl openjade sgml-tools ghostscript-module-SVGALIB cttex
-  1 BOOKS docbook-style-dsssl-doc
-
-  5 CUPS 
-      cups-drivers xpp
-  5 CUPS || LPR foomatic
-  1 CUPS hpoj
-
-SHELLS
-  3 zsh
-  3 BOOKS bash-doc zsh-doc
-  2 eshell pdksh tcsh
-  1 bash1
-
-SCIENCES
-  5 3D openuniverse
-  4 gnuplot gtkgraphh
-  3 xlispstat HDF
-  2 mathplot octave
-  1 xoscope
-
-EDITORS
-  5 vim-enhanced
-  4 emacs-X11
-  3 GXedit vim-X11
-  2 nedit cooledit emacs-tramp joe emacs-leim jed-xjed xemacs xemacs-extras xemacs-info yudit
-  1 auctex emacs-el jed xemacs-el emacs-nox xwpe xwpe-X11
-  GNOME
-    4 gedit
-
-TEXT_TOOLS
-  5 words
-  4 groff patch recode rgrep
-  4 ispell-de ispell-fr
-  3 ed
-  2 groff-gxditview lout
-  BOOKS
-    3 gawk-doc
-    1 lout-doc
-
-COMMUNICATIONS
-  4 efax
-  3 jpilot pilot-link
-  2 hylafax-server hylafax-client dip
-  2 lrzsz mgetty mgetty-contrib mgetty-sendfax mgetty-viewfax mgetty-voice minicom
-  1 jpilot-Mail jpilot-syncmal statserial tkbabel
-
-TERMINALS
-  5 open xterm
-  4 screen kon2
-  3 Eterm vlock
-  1 aterm x3270
-
-  4 KDE ktelnet
-  4 GNOME gnome-telnet
-  4 LOCALES"ja" kterm 
-
-NETWORKING_CHAT
-  3 talk ytalk
-NETWORKING_CHAT_SERVER
-  4 jabber 
-  3 talk-server
-    
-NETWORKING_FILE_TRANSFER
-  5 lftp mirrordir rsync
-  4 gftp rdist
-  3 fmirror ncftp tftp
-  3 GNOME dpsftp
-  2 uucp
-
-NETWORKING_FILE_TRANSFER_SERVER
-  4 proftpd bwbserver_linux
-  4 WIZARDS wizards_lib-ftp
-  2 wu-ftpd anonftp
-
-NETWORKING_LDAP_SERVER
-  4 openldap directory_administrator
-
-NETWORKING_INSTANT_MESSAGING
-  4 licq
-  3 everybuddy licq-autoreply licq-console licq-forwarder licq-rms licq-update-hosts
-  GNOME
-    5 aspell-fr aspell-en
-    4 gnomeicu gabber gaim
-    3 gtk+licq
-
-NETWORKING_IRC
-  4 KDE kvirc
-  3 BitchX mozilla-irc
-  3 GNOME xchat
-  2 irssi
-  1 eggdrop
-
-NETWORKING_FIREWALLING_SERVER
-  5 iproute2 routed iptables
-  5 WIZARDS wizards_lib-firewall
-  3 prelude
-  1 portsentry 
-
-NETWORKING_GROUPWARE_SERVER
-  4 phpgroupware bwbserver_linux
-
-NETWORKING_MAIL
-  5 mailx metamail
-  4 faces mozilla-mail evolution
-  3 fetchmail urlview sylpheed
-  3 !GNOME !KDE xmailbox
-  2 FaxMail comsat elm faces-xface
-  1 exmh mutt fetchmail-daemon fetchmailconf pine
-NETWORKING_MAIL_SERVER
-  5 postfix 
-  5 WIZARDS wizards_lib-postfix
-  4 sympa 
-  2 iems-mdk-cdcom
-
-NETWORKING_NEWS
-  5 GNOME pan
-  2 slrn tin trn 
-  1 slrn-pull xrn
-NETWORKING_NEWS_SERVER
-  4 inn 
-  4 WIZARDS wizards_lib-news
-  3 inews 
-
-NETWORKING_OTHER
-  2 finger fwhois ucd-snmp-utils
-    htdig macutils queso
-NETWORKING_OTHER_SERVER
-  3 dhcp gated timed xntp3 
-  3 WIZARDS wizards_lib-dhcp wizards_lib-time 
-
-  3 intimed mcserv nscd imap pidentd
-    rdate bootparamd 
-    cleanfeed ucd-snmp leafnode
-    cvsweb
-    XFree86-Xvfb XFree86-Xnest
-  2 heartbeat diald finger-server mars-nwe cvsweb
-
-NIS
-  5 ypbind
-NIS_SERVER
-  5 ypserv
-
-NETWORKING_REMOTE_ACCESS
-  5 openssh-clients telnet telnet-client-krb5
-  4 traceroute rfbdrake
-  3 vnc
-  2 rsh vnc-SVGALIB vnc-java
-  2 BOOKS vnc-doc
-  1 sftp
-NETWORKING_REMOTE_ACCESS_SERVER
-  5 openssh-server
-  4 rfbdrake
-  2 vnc-server
-  1 telnet-server-krb5 rsh-server
-
-NETWORKING_DNS
-  4 bind-utils 
-NETWORKING_DNS_SERVER
-  5 bind 
-  5 WIZARDS wizards_lib-dns
-  4 caching-nameserver
-  1 nslint
-
-NETWORKING_FILE
-  4 samba-client nfs-utils-clients
-  2 arkeia-gui arkeia-client arkeia-arkc
-  2 GNOME gnomba gtm
-  2 autofs
-  1 am-utils
-NETWORKING_FILE_SERVER 
-  5 nfs-utils
-  4 WIZARDS wizards_lib-samba
-  4 samba bwbserver_linux
-  3 BOOKS samba-doc 
-  2 arkeia-server samba-winbind
-  3 squid squidGuard
-
-NETWORKING_WWW
-  3 lynx 
-  4 !LOCALES"eu" netscape-communicator netscape-plugins 
-  4 wget links mozilla Flashplayer-mdk-cdcom crossover-plugin-demo j2re-mdk-cdcom opera-mdk-cdcom
-  4 GNOME 
-      screem 
-      !LOCALES"eu" galeon 
-  3 plugger opera bluefish
-  4 !LOCALES"eu" netscape-castellano netscape-catalan netscape-chinese_gb2312 netscape-chinese_big5 netscape-euskara netscape-francais netscape-german netscape-japanese netscape-polish netscape-russian netscape-walon
-NETWORKING_WWW_SERVER
-  5 apache apache-mod_perl mod_ssl
-  4 apache-suexec bwbserver_linux
-  4 WIZARDS wizards_lib-web
-  4 BOOKS apache-manual
-  3 php-dba_gdbm_db2 php-gd php-imap php-ldap php-manual php-mysql php-oracle
-    php-pgsql php-readline php mod_php mod_ssl-sxnet auth_ldap HTML-Embperl PHP-nuke
-  2 ApacheJServ
-  1 Zope Zope-core Zope-pcgi Zope-zserver
-
-GRAPHICS
-  4 ImageMagick giftrans gimp gphoto gphoto2 qiv ac3d
-  3 gimp-data-extras gqview sketch xloadimage xpcd xwpick xli
-  2 blender-mdk-cdcom
-  2 gif2png gimp-perl xfig xpcd-gimp gd-utils cameleo VariCAD-mdk-cdcom
-  1 libgr-progs libungif-progs qcad transfig zgv xpaint xmorph
-  1 3D Mesa-demos
-  GNOME
-    4 gnome-iconedit
-    3 ee
-
-ARCHIVING
-  5 dump ncompress sharutils unzip
-  4 gtkzip zip
-  3 unarj unstuff mt-st
-  2 taper
-  1 lha
-  GNOME
-    4 gnozip
-    3 gtktalog
-
-BURNER
-  5 mkisofs cdrecord
-  4 GNOME gnome-toaster gcombust
-  4 X xcdroast
-  2 X eroaster 
-  DEVELOPMENT
-    3 cdrecord-devel
-
-SCANNER
-  5 sane-frontends
-  4 gimp
-  4 xsane
-
-PHOTO
-  4 gphoto gphoto2
-  3 gnomemeeting openmcu
-
-DATABASES
-  5 postgresql
-  3 MySQL-client MySQL-shared
-  DATABASES_SERVER
-    4 postgresql-server
-    3 MySQL
-    3 postgresql-perl postgresql-python
-    2 postgresql-jdbc postgresql-tk postgresql-odbc postgresql-tcl postgresql-test
-  DEVELOPMENT 
-    4 perl-Mysql
-    3 postgresql-devel
-    1 MySQL-bench MySQL-devel
-
-GAMES
-  4 sin-demo
-  4 clanbomber freeciv lbreakout2 toppler frozen-bubble uplink-mdk-cdcom
-  3 shogo-demo 
-  3 cxhextris nethack_falconseye rocksndiamonds tuxpuck teg powermanga mures methane
-  2 Maelstrom pingus ltris penguin-command pysol xtrojka bunnies xpilot trophy xboard xgammon xkobo xpat2 xpuzzles xsoldier xfishtank
-  1 7colors xrally fortune-mod nil
-  GNOME
-    4 gnome-games
-    3 gnome-chess
-    2 3D gtulpas
-    1 gtkgo
-    DEVELOPMENT
-      2 gnomes-games-devel
-  KDE
-    4 kdegames
-    DEVELOPMENT
-      2 kdegames-devel
-  3D
-    4 csmash armagetron
-      !HW"Riva.*128" chromium tuxracer
-
-    3 !HW"Riva.*128" !HW"Rage X[CL]" !HW"Rage Mobility (?:P\/M|L) " !HW"3D Rage (?:LT|Pro)" # XF3 3D
-        bzflag
-    3 flightgear glaxium
-
-DEVELOPMENT
-  5 autoconf automake m4 make 
-  3 autoconf2.5
-  1 tmake pmake pmake-customs
-
-  5 libtool binutils ltrace gdb gcc
-  2 gperf cdecl cproto indent ElectricFence
-  2 gcc3.0
-  1 egcs glibc-profile xxgdb
-
-  4 gcc-c++ libstdc++-devel
-  2 gcc3.0-c++ libstdc++3.0-devel
-  2 libsigc++-examples
-  1 egcs-c++ 
-
-  3 bison flex
-  2 byacc
-
-  2 doxygen C++2LaTeX
-
-  3 jikes kaffe
-  2 gcc3.0-java
-  1 gcc-java
-  1 gcc3.0-g77
-
-  5 cvs rcs
-  2 diffstat tkcvs
-
-  3 swig
-
-  4 python veepee tkinter
-  3 python-devel python-imaging pygtk-glarea pygtk pygtk-libglade rpm-python
-
-  4 perl perl-Term-Readline-Gnu perl-libnet perl-libwww-perl perl-devel
-  3 perl-DBI perl-Digest-MD5 perl-IO-stringy perl-PDL perl-Parse-RecDescent 
-    perl-GTK-GLArea perl-Tk perlftlib eperl perl-URI perl-DB_File
-    perl-Data-ShowTable perl-HTML-Parser perl-HTML-SimpleParse perl-MIME-Base64
-    perl-MIME-tools perl-MP3-Info perl-MailTools perl-Msgcat
-
-  4 rpm-build
-  3 rpmlint rpm-devel
-  3 kernel-source
-
-  2 gcc-g77 nasm dev86 
-  1 egcs-g77 egcs-objc gcc-objc gcc-chill
-
-  2 teyjus gprolog ocaml umb-scheme mawk guile clisp SmallEiffel p2c 
-    ghc ghc-prof happy haskell-GTK haskell-GTK-devel hugs98 mercury swi-prolog 
-    ruby-extensions ruby-gtk ruby 
-
-  4 gettext-devel
-
-  2 j2sdk-mdk-cdcom
-
-  BOOKS
-    2 pam-doc python-docs slang-doc kernel-doc nasm-doc qt2-doc ruby-doc lkmpg
-
-  KDE
-    4 kdevelop
-    3 kdebase-devel kdegraphics-devel kdelibs-devel kdelibs-sound-devel
-      kdemultimedia-devel kdenetwork-devel
-    1 kdesupport-devel kdeaddutils-devel koffice-devel
-
-  GNOME
-    4 perl-GTK-Glade perl-GTK-Gnome 
-    3 memprof glade gnome-guile pygnome libgnomeui2_0-devel gnome-guile-devel
-      gnome-pim-devel gob 
-    2 pygnome-applet pygnome-capplet pygnome-libglade rep-gtk-gnome
-      gnomemm-devel gnome-pilot-devel glademm 
-    1 gnucash-devel rep-gtk-libglade
-
-  DEVELOPMENT_OTHER
-    2 ImageMagick-devel Mesa-common-devel Xaw3d-devel detect-devel
-      gd-devel p2c-devel gmp-devel guile-devel libgr-devel libjpeg-devel libpng-devel
-      libtermcap-devel libtiff-devel libungif-devel libxml-devel libxml2-devel
-      linuxconf-devel slang-devel sox-devel zlib-devel XFree86-devel dev86-devel
-      gdk-pixbuf-devel gimp-devel gpm-devel kudzu-devel libghttp-devel libgtop-devel
-      libmikmod-devel librep-devel libunicode-devel popt-devel pwdb-devel t1lib-devel
-      ucd-snmp-devel mpeg_lib-devel WindowMaker-devel aalib-devel adns-devel
-      alsa-lib-devel audiofile-devel cups-devel e2fsprogs-devel egcs-objc-devel
-      g-wrap-devel gkrellm-devel ibtk libPropList-devel licq-devel openldap-devel
-      parted-devel pciutils-devel pilot-link-devel svgalib-devel
-      recode-devel aspell-devel cracklib-devel faces-devel fnlib-devel
-      freetype-devel gtk+mdk-devel gtkglarea-devel XFree86-static-libs imap-devel
-      php-devel pth-devel sane-devel swig-devel xdelta-devel isapnptools-devel
-      pango-devel readline-devel
-
-MONITORING
-  5 procinfo psacct
-  5 PCMCIA apmd
-  4 lsof swatch tcpdump traceroute
-  3 iplog arpwatch lslk nmap nmap-frontend procps-X11 xcpustate xsysinfo 
-  2 cfengine gkrellm gps rusers mon xosview 3D xtraceroute
-  1 logcheck bonnie
-  GNOME
-    4 gnome-system-monitor
-
-FILE_TOOLS
-  5 file gnupg mkxauth mtools slocate
-  4 symlinks
-  3 dosfstools draksync mc tree
-  2 git gentoo sfm xwc FileRunner
-  1 xdelta
-
-WEBMIN
-  3 webmin
-
-CONFIG
-  4 linuxconf linuxconf-lang-fr linuxconf-lang-de
-  4 GNOME gnome-linuxconf
-  3 Bastille-Curses-module
-  3 ipvsadm quota usernet
-  2 gfcc control-panel adjtimex isicom xinput timeconfig Bastille-Tk-module 
-    samba-swat
-  1 ipxutils
-
-BOOKS
-  4 mandrake_doc-de mandrake_doc-en mandrake_doc-es mandrake_doc-fr mandrake_doc-it
-
-X
-  5 XFree86 rxvt XFree86-75dpi-fonts urw-fonts
-  5 icewm-light
-
-  4 gurpmi rpmdrake drakconf userdrake fonts-ttf-decoratives harddrake fonts-ttf-west_european
-    mandrake-mime menudrake drakfloppy drakfont mandrake_desk mdk-cdcom-html-pages 
-    mdkonline drakfirsttime mdk-eazel-engine bootsplash
-  4 LOCALES"ja" || LOCALES"ko" || LOCALES"zh" rxvt-CJK 
-
-  3 XFree86-100dpi-fonts draksync drakprofile
-  3 USB usbview
-  2 LOCALES"ja" || LOCALES"ko" || LOCALES"zh" jmcce 
-  2 tksysv imlib-cfgeditor
-    Aurora-Monitor-NewStyle-Categorizing-WsLib
-    Aurora-Monitor-NewStyle-WsLib Aurora-Monitor-Traditional-Gtk+
-    Aurora-Monitor-Traditional-WsLib
-  1 DrakeLogo drakprofile Mesa xtoolwait X11R6-contrib 
-
-  GNOME
-    3 gnorpm
-
-  5 xcin Chinput xa+cv xvnkb FreeWnn ami kinput2-wnn4
-
-  5 GNOME ami-gnome
-  2 app-defaults-be app-defaults-cs app-defaults-ga app-defaults-ru app-defaults-th app-defaults-uk
-
-  5 CHARSET"iso-8859-13" fonts-type1-baltic
-    LOCALES"ru" || LOCALES"uk" XFree86-cyrillic-fonts
-    LOCALES"he" fonts-hebrew-elmar
-    LOCALES"hy" fonts-ttf-armenian
-    LOCALES"ja" fonts-ttf-japanese
-    LOCALES"ko" fonts-ttf-korean
-    LOCALES"th" fonts-ttf-thai
-    LOCALES"zh_CN" || LOCALES"zh" fonts-ttf-gb2312
-    LOCALES"zh_TW" || LOCALES"zh" taipeifonts fonts-ttf-big5
-
-DOCS
-  5 man info man-pages
-
-SYSTEM
-  5 at MAKEDEV anacron eject kudzu ldetect devfsd
-    locales iputils urpmi cpio msec tmpwatch
-
-  5 HIGH_SECURITY libsafe kernel-secure
-  5 BIGMEM kernel-enterprise
-  5 SMP kernel-smp
-  5 PCMCIA pcmcia-cs
-  5 USB hotplug
-
-  5 HW"nForce.*(?:Audio|Network)" 
-     NVIDIA_nforce-2.4.18-6mdk
-     BIGMEM NVIDIA_nforce-2.4.18-6mdk-enterprise
-
-  4 ftp ftp-client-krb5 gpm hexedit strace sudo grub procmail gnupg
-
-  3 bc
-  2 sndconfig kernel-utils sane acpid adns audiofile freeswan awesfx fbset vlan-utils
-  1 fdutils genromfs mailcap pinfo
-
-  BOOKS 
-    5 man-pages-cs man-pages-de man-pages-es man-pages-fr man-pages-hu man-pages-id man-pages-ja man-pages-ko man-pages-pl man-pages-ru man-pages-zh
-    4 grub-doc lilo-doc
-      howto-html-de howto-html-fr
-
-  4 NIS yp-tools
-  3 PCMCIA irda-utils
-  3 USB usbutils
-
-  4 LOCALES"ar" || LOCALES"fa" || LOCALES"he" || LOCALES"yi" acon
-  3 LOCALES"zh" zh-autoconvert
-
-EMULATORS
-  3 wine
-  2 codeweavers-wine-mdk-cdcom
-  2 BasiliskII-jit
-  1 BasiliskII
-  2 xdosemu 
-  1 xmame xmess
-
-INSTALL
-  NOCOPY
-    5 kernel22 kernel22-smp kernel22-secure kernel kernel-smp kernel-enterprise
-      raidtools lvm reiserfsprogs jfsprogs xfsprogs 
-      alsa alsa-utils
-    4 XFree86
-
-  5 pptp-adsl dhcpcd dhcpxd dhcp-client isdn4net isdn-light isdn4k-utils ibod rp-pppoe pump wireless-tools speedtouch
-    ppp nfs-utils-clients
-    autologin ntp cups-drivers samba ncpfs hpoj ucd-snmp libptal0
-    ipchains printer-utils rlpr samba-client
-    xpp pdq printer-testpages 
-    autologin ntp ipchains 
-    cups LPRng lpr foomatic printer-utils printer-testpages gimpprint xpp 
-    nc qtcups kups sndconfig
-    ImageMagick ghostscript printer-filters mpage a2ps ppdfilt libppd1 gpr groff libgimpprint1 numlock curl
-    sane-backends sane-frontends xsane xsane-gimp
-    hotplug dev ypbind speedtouch_mgmt
-  4 XFree86-SVGA XFree86-server XFree86-Mach64 XFree86-FBDev
-    XFree86-glide-module Device3Dfx Glide_V3-DRI Glide_V5 Mesa
-  3 XFree86-S3 XFree86-S3V XFree86-VGA16
-  2 XFree86-8514 XFree86-AGX XFree86-I128 XFree86-Mach32 XFree86-Mach8 XFree86-Mono XFree86-P9000 XFree86-W32
-  1 XFree86-3DLabs XFree86-Sun XFree86-SunMono XFree86-Sun24
diff --git a/perl-install/share/step-green-click.xpm b/perl-install/share/step-green-click.xpm
deleted file mode 100644
index a8f7068c5..000000000
--- a/perl-install/share/step-green-click.xpm
+++ /dev/null
@@ -1,245 +0,0 @@
-/* XPM */
-static char * step_green_click_xpm[] = {
-"21 21 221 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #455896",
-"* 	c #374570",
-"= 	c #20232D",
-"- 	c #1A1A1A",
-"; 	c #1B1B1B",
-"> 	c #202020",
-", 	c #2A2C34",
-"' 	c #3F4D78",
-") 	c #333F64",
-"! 	c #1A1A1B",
-"~ 	c #1E1E1E",
-"{ 	c #242424",
-"] 	c #282828",
-"^ 	c #2A2A2A",
-"/ 	c #2C2C2C",
-"( 	c #303030",
-"_ 	c #343434",
-": 	c #424C6D",
-"< 	c #303A5A",
-"[ 	c #262626",
-"} 	c #6E736C",
-"| 	c #A3AE9D",
-"1 	c #AFC5A5",
-"2 	c #9FBE90",
-"3 	c #789A68",
-"4 	c #4F6943",
-"5 	c #3E413C",
-"6 	c #3F3F3F",
-"7 	c #434343",
-"8 	c #4A5370",
-"9 	c #3B3D3A",
-"0 	c #A8B1A5",
-"a 	c #E2F2DA",
-"b 	c #CFEBC2",
-"c 	c #B8E1A5",
-"d 	c #A3D68A",
-"e 	c #88C66A",
-"f 	c #60AF3A",
-"g 	c #3A7B1B",
-"h 	c #4B5745",
-"i 	c #4F4F4F",
-"j 	c #525459",
-"k 	c #4D619E",
-"l 	c #2E2F2D",
-"m 	c #9DAC95",
-"n 	c #D6EECA",
-"o 	c #BDE4AB",
-"p 	c #98D57B",
-"q 	c #7AC656",
-"r 	c #6CBD46",
-"s 	c #62B33B",
-"t 	c #49A31E",
-"u 	c #349506",
-"v 	c #48832C",
-"w 	c #5B5F59",
-"x 	c #5E5E5E",
-"y 	c #59627F",
-"z 	c #272727",
-"A 	c #62725B",
-"B 	c #B8E1A4",
-"C 	c #ACDD95",
-"D 	c #82CC5F",
-"E 	c #5ABA2C",
-"F 	c #46AE14",
-"G 	c #40A70F",
-"H 	c #40A211",
-"I 	c #359706",
-"J 	c #369609",
-"K 	c #439C1A",
-"L 	c #5E7D4F",
-"M 	c #6A6A6A",
-"N 	c #696C76",
-"O 	c #242730",
-"P 	c #252525",
-"Q 	c #333333",
-"R 	c #749D60",
-"S 	c #94D176",
-"T 	c #7EC85A",
-"U 	c #54B525",
-"V 	c #3CA907",
-"W 	c #35A300",
-"X 	c #339D00",
-"Y 	c #339701",
-"Z 	c #319401",
-"` 	c #38960A",
-" .	c #489F1E",
-"..	c #609547",
-"+.	c #7A7A7A",
-"@.	c #7B7B7D",
-"#.	c #272829",
-"$.	c #2F2F2F",
-"%.	c #3C3C3C",
-"&.	c #61A342",
-"*.	c #5CB630",
-"=.	c #40A90E",
-"-.	c #34A200",
-";.	c #329900",
-">.	c #309500",
-",.	c #309201",
-"'.	c #39970C",
-").	c #4CA123",
-"!.	c #63A145",
-"~.	c #878787",
-"{.	c #888888",
-"].	c #33363F",
-"^.	c #383838",
-"/.	c #444444",
-"(.	c #42901C",
-"_.	c #45A517",
-":.	c #42A413",
-"<.	c #379E05",
-"[.	c #329B00",
-"}.	c #329700",
-"|.	c #2F9300",
-"1.	c #319303",
-"2.	c #3D9911",
-"3.	c #52A42B",
-"4.	c #6AA44C",
-"5.	c #949494",
-"6.	c #939494",
-"7.	c #3F465C",
-"8.	c #404040",
-"9.	c #4A4A4A",
-"0.	c #418023",
-"a.	c #369906",
-"b.	c #339803",
-"c.	c #329701",
-"d.	c #309400",
-"e.	c #2F9200",
-"f.	c #359508",
-"g.	c #469D1C",
-"h.	c #5AA834",
-"i.	c #78A761",
-"j.	c #A0A0A0",
-"k.	c #999BA0",
-"l.	c #47547D",
-"m.	c #494949",
-"n.	c #525252",
-"o.	c #507141",
-"p.	c #3F9B13",
-"q.	c #3C990F",
-"r.	c #37970A",
-"s.	c #339405",
-"t.	c #329404",
-"u.	c #429B17",
-"v.	c #53A42C",
-"w.	c #61AB3D",
-"x.	c #91AB84",
-"y.	c #ADADAD",
-"z.	c #9398AA",
-"A.	c #4B5F9C",
-"B.	c #51545B",
-"C.	c #5A5A5A",
-"D.	c #626560",
-"E.	c #568E3B",
-"F.	c #4BA022",
-"G.	c #479E1E",
-"H.	c #439C18",
-"I.	c #409B15",
-"J.	c #499F1F",
-"K.	c #55A52E",
-"L.	c #60AB3C",
-"M.	c #80AF69",
-"N.	c #B4B7B2",
-"O.	c #B8B8B8",
-"P.	c #7381AE",
-"Q.	c #515F8A",
-"R.	c #616161",
-"S.	c #6B6B6B",
-"T.	c #747E6F",
-"U.	c #689A50",
-"V.	c #5AA835",
-"W.	c #59A733",
-"X.	c #58A632",
-"Y.	c #5EAA39",
-"Z.	c #63AC3F",
-"`.	c #83B26C",
-" +	c #B5BEB1",
-".+	c #C2C2C2",
-"++	c #A6ABBB",
-"@+	c #5F677F",
-"#+	c #757575",
-"$+	c #828282",
-"%+	c #8C908B",
-"&+	c #86A078",
-"*+	c #7AA863",
-"=+	c #73AC57",
-"-+	c #75AD59",
-";+	c #84B16D",
-">+	c #9EB891",
-",+	c #C1C5C0",
-"'+	c #C9C9C9",
-")+	c #B5B8C4",
-"!+	c #5A6EAE",
-"~+	c #647095",
-"{+	c #86878C",
-"]+	c #979797",
-"^+	c #A2A2A2",
-"/+	c #ACACAC",
-"(+	c #B3B3B3",
-"_+	c #BBBBBB",
-":+	c #C8C8C8",
-"<+	c #CACBCB",
-"[+	c #B0B5C4",
-"}+	c #5B6FAF",
-"|+	c #5669A7",
-"1+	c #7C85A3",
-"2+	c #9B9EA8",
-"3+	c #AFB0B2",
-"4+	c #B9B9B9",
-"5+	c #C0C0C1",
-"6+	c #BEBFC4",
-"7+	c #ABB0C2",
-"8+	c #7D8BB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # @ & . . . . . . ",
-". . . . . * = - - - - - ; > , ' . . . . . ",
-". . . . ) ! - - - ~ { ] ^ / ( _ : . . . . ",
-". . . < ! - - [ } | 1 2 3 4 5 6 7 8 . . . ",
-". . + = - - 9 0 a b c d e f g h i j k . . ",
-". . @ - - l m n o p q r s t u v w x y . . ",
-". . # ; z A B C D E F G H I J K L M N . . ",
-". . O P Q R S T U V W X Y Z `  ...+.@.. . ",
-". . #.$.%.&.r *.=.-.X ;.>.,.'.).!.~.{.. . ",
-". . ].^./.(._.:.<.[.}.>.|.1.2.3.4.5.6.. . ",
-". . 7.8.9.0.a.b.c.>.d.e.,.f.g.h.i.j.k.. . ",
-". . l.m.n.o.p.q.r.s.1.t.J u.v.w.x.y.z.. . ",
-". . A.B.C.D.E.F.G.H.I.u.J.K.L.M.N.O.P.. . ",
-". . . Q.R.S.T.U.V.W.X.W.Y.Z.`. +.+++. . . ",
-". . . . @+#+$+%+&+*+=+-+;+>+,+'+)+!+. . . ",
-". . . . . ~+{+]+^+/+(+_+.+:+<+[+}+. . . . ",
-". . . . . . |+1+2+3+4+5+6+7+8+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/step-green-on.xpm b/perl-install/share/step-green-on.xpm
deleted file mode 100644
index d1edbd483..000000000
--- a/perl-install/share/step-green-on.xpm
+++ /dev/null
@@ -1,242 +0,0 @@
-/* XPM */
-static char * step_green_on_xpm[] = {
-"21 21 218 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #36436C",
-"* 	c #465996",
-"= 	c #374570",
-"- 	c #20232D",
-"; 	c #1A1A1A",
-"> 	c #1F1F1F",
-", 	c #252525",
-"' 	c #282828",
-") 	c #272727",
-"! 	c #262626",
-"~ 	c #2C2F36",
-"{ 	c #404E79",
-"] 	c #333F64",
-"^ 	c #1A1A1B",
-"/ 	c #383938",
-"( 	c #858881",
-"_ 	c #B1BAA9",
-": 	c #C3D3B3",
-"< 	c #B5CD9C",
-"[ 	c #8FAA75",
-"} 	c #667951",
-"| 	c #3E423B",
-"1 	c #383838",
-"2 	c #434D6E",
-"3 	c #303A5A",
-"4 	c #515250",
-"5 	c #ACB1A8",
-"6 	c #E9F2E2",
-"7 	c #EDF9E2",
-"8 	c #E1F5CE",
-"9 	c #CCECAC",
-"0 	c #B1DF82",
-"a 	c #90C857",
-"b 	c #6A8F45",
-"c 	c #4F5649",
-"d 	c #474747",
-"e 	c #4B5470",
-"f 	c #202020",
-"g 	c #535551",
-"h 	c #C5CEBC",
-"i 	c #F1FAE8",
-"j 	c #F4FBEC",
-"k 	c #F0FAE6",
-"l 	c #E3F6D1",
-"m 	c #CAECA8",
-"n 	c #A9DC75",
-"o 	c #85CA40",
-"p 	c #82C440",
-"q 	c #77A14B",
-"r 	c #5C6256",
-"s 	c #55575B",
-"t 	c #4E619F",
-"u 	c #1C1C1C",
-"v 	c #41433F",
-"w 	c #A3AF97",
-"x 	c #E6F7D5",
-"y 	c #F3FBEB",
-"z 	c #F2FBEA",
-"A 	c #E5F6D4",
-"B 	c #C7EBA3",
-"C 	c #9FD865",
-"D 	c #84C93E",
-"E 	c #85C545",
-"F 	c #86C24A",
-"G 	c #779558",
-"H 	c #636363",
-"I 	c #5B6481",
-"J 	c #2B3248",
-"K 	c #7B896D",
-"L 	c #CBE9AF",
-"M 	c #DAF3C2",
-"N 	c #E4F6D3",
-"O 	c #EEF9E3",
-"P 	c #F1FAE7",
-"Q 	c #E3F5D0",
-"R 	c #BFE797",
-"S 	c #8ED04B",
-"T 	c #87C843",
-"U 	c #89C64C",
-"V 	c #8BC351",
-"W 	c #8BBC58",
-"X 	c #76806C",
-"Y 	c #6E717B",
-"Z 	c #272A33",
-"` 	c #333333",
-" .	c #92B074",
-"..	c #BDE892",
-"+.	c #C7ECA1",
-"@.	c #D2F0B5",
-"#.	c #DDF4C7",
-"$.	c #E2F5CF",
-"%.	c #D3EFB7",
-"&.	c #A9DC74",
-"*.	c #86CB40",
-"=.	c #8BC94C",
-"-.	c #8EC754",
-";.	c #91C55A",
-">.	c #92C45F",
-",.	c #859971",
-"'.	c #7F7F81",
-").	c #2A2B2C",
-"!.	c #3D3D3D",
-"~.	c #8DBD5C",
-"{.	c #9EDA62",
-"].	c #A5DE6C",
-"^.	c #AEE27A",
-"/.	c #B6E487",
-"(.	c #B7E48A",
-"_.	c #A4DA6B",
-":.	c #87CB40",
-"<.	c #8CCB4D",
-"[.	c #92CA58",
-"}.	c #94C95F",
-"|.	c #97C763",
-"1.	c #97C766",
-"2.	c #8FA875",
-"3.	c #898989",
-"4.	c #353841",
-"5.	c #434343",
-"6.	c #7BB443",
-"7.	c #86CD40",
-"8.	c #88CF41",
-"9.	c #89CF41",
-"0.	c #88CD42",
-"a.	c #8BCD48",
-"b.	c #90CD52",
-"c.	c #95CC5D",
-"d.	c #99CB65",
-"e.	c #9ACA68",
-"f.	c #99C869",
-"g.	c #9AC86B",
-"h.	c #93AC7B",
-"i.	c #8F9090",
-"j.	c #3F465D",
-"k.	c #76A04C",
-"l.	c #8ACA47",
-"m.	c #8CCC4A",
-"n.	c #8ECE4D",
-"o.	c #90CE50",
-"p.	c #92CD54",
-"q.	c #95CE5C",
-"r.	c #99CD63",
-"s.	c #9BCD68",
-"t.	c #9CCA6B",
-"u.	c #9BC96B",
-"v.	c #99AA86",
-"w.	c #95969B",
-"x.	c #48557D",
-"y.	c #4B4B4B",
-"z.	c #6B8254",
-"A.	c #8AC150",
-"B.	c #8FC954",
-"C.	c #92CB57",
-"D.	c #98CD62",
-"E.	c #9BCD67",
-"F.	c #9BCC6A",
-"G.	c #9CCB6B",
-"H.	c #9AC46E",
-"I.	c #A3AB9B",
-"J.	c #9095A7",
-"K.	c #4C5F9D",
-"L.	c #50535B",
-"M.	c #5E625B",
-"N.	c #7C9A5D",
-"O.	c #91C75A",
-"P.	c #95C95F",
-"Q.	c #98CB65",
-"R.	c #9BCB69",
-"S.	c #A1B888",
-"T.	c #B3B3B3",
-"U.	c #7381AD",
-"V.	c #515F8A",
-"W.	c #626262",
-"X.	c #71776C",
-"Y.	c #8AAD66",
-"Z.	c #98C865",
-"`.	c #9AC969",
-" +	c #A0BE80",
-".+	c #B8BCB4",
-"++	c #A6ABBA",
-"@+	c #606780",
-"#+	c #777777",
-"$+	c #858A80",
-"%+	c #91AA76",
-"&+	c #98C36D",
-"*+	c #9BC570",
-"=+	c #A6BE8E",
-"-+	c #BEC2BA",
-";+	c #B2B6C1",
-">+	c #5A6EAE",
-",+	c #657096",
-"'+	c #88898E",
-")+	c #979797",
-"!+	c #9DA695",
-"~+	c #A0B28D",
-"{+	c #A1B987",
-"]+	c #A3BB8A",
-"^+	c #AABC98",
-"/+	c #B8C0B0",
-"(+	c #C7C7C7",
-"_+	c #AFB4C3",
-":+	c #5A6FAE",
-"<+	c #5669A7",
-"[+	c #7D86A3",
-"}+	c #9DA0AA",
-"|+	c #B0B1B3",
-"1+	c #B8B8B8",
-"2+	c #BCBCBD",
-"3+	c #BABCC0",
-"4+	c #A8AEC0",
-"5+	c #7C8AB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # & * . . . . . . ",
-". . . . . = - ; ; > , ' ) ! ~ { . . . . . ",
-". . . . ] ^ ; / ( _ : < [ } | 1 2 . . . . ",
-". . . 3 ^ > 4 5 6 7 8 9 0 a b c d e . . . ",
-". . + - f g h i j k l m n o p q r s t . . ",
-". . @ u v w x 7 y z A B C D E F G H I . . ",
-". . J ' K L M N O P Q R S T U V W X Y . . ",
-". . Z `  ...+.@.#.$.%.&.*.=.-.;.>.,.'.. . ",
-". . ).!.~.{.].^./.(._.:.<.[.}.|.1.2.3.. . ",
-". . 4.5.6.7.8.9.8.0.a.b.c.d.e.f.g.h.i.. . ",
-". . j.d k.l.m.n.o.p.q.r.s.t.u.u.u.v.w.. . ",
-". . x.y.z.A.B.C.c.D.E.F.G.u.u.u.H.I.J.. . ",
-". . K.L.M.N.O.P.Q.R.G.t.u.u.u.u.S.T.U.. . ",
-". . . V.W.X.Y.Z.`.u.u.u.u.u.u. +.+++. . . ",
-". . . . @+#+$+%+&+u.u.u.u.*+=+-+;+>+. . . ",
-". . . . . ,+'+)+!+~+{+]+^+/+(+_+:+. . . . ",
-". . . . . . <+[+}+|+1+2+3+4+5+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/step-green.xpm b/perl-install/share/step-green.xpm
deleted file mode 100644
index adfefd698..000000000
--- a/perl-install/share/step-green.xpm
+++ /dev/null
@@ -1,243 +0,0 @@
-/* XPM */
-static char * step_green_xpm[] = {
-"21 21 219 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #36436C",
-"* 	c #465996",
-"= 	c #374570",
-"- 	c #20232D",
-"; 	c #1A1A1A",
-"> 	c #1F1F1F",
-", 	c #252525",
-"' 	c #282828",
-") 	c #272727",
-"! 	c #262626",
-"~ 	c #2C2F36",
-"{ 	c #404E79",
-"] 	c #333F64",
-"^ 	c #1A1A1B",
-"/ 	c #383938",
-"( 	c #81867E",
-"_ 	c #A8B5A2",
-": 	c #B1CAA5",
-"< 	c #9AC088",
-"[ 	c #739B5F",
-"} 	c #4F6E40",
-"| 	c #3B4038",
-"1 	c #383838",
-"2 	c #434D6E",
-"3 	c #303A5A",
-"4 	c #50514F",
-"5 	c #A8AFA4",
-"6 	c #E1EDDB",
-"7 	c #E1F2D8",
-"8 	c #CBEABD",
-"9 	c #A9DA91",
-"0 	c #7EC55B",
-"a 	c #52A828",
-"b 	c #427A26",
-"c 	c #485243",
-"d 	c #474747",
-"e 	c #4B5470",
-"f 	c #202020",
-"g 	c #515450",
-"h 	c #BBC8B5",
-"i 	c #E7F5E0",
-"j 	c #EBF7E6",
-"k 	c #E5F4DE",
-"l 	c #CFEBC1",
-"m 	c #A5D98C",
-"n 	c #70BF49",
-"o 	c #3AA407",
-"p 	c #3A9E09",
-"q 	c #478927",
-"r 	c #565F51",
-"s 	c #55575B",
-"t 	c #4E619F",
-"u 	c #1C1C1C",
-"v 	c #3F423E",
-"w 	c #96A88C",
-"x 	c #D3EDC7",
-"y 	c #EAF6E4",
-"z 	c #E9F6E3",
-"A 	c #D3ECC6",
-"B 	c #A0D686",
-"C 	c #5FB734",
-"D 	c #37A104",
-"E 	c #3EA10F",
-"F 	c #44A018",
-"G 	c #55833F",
-"H 	c #636363",
-"I 	c #5B6481",
-"J 	c #2B3248",
-"K 	c #6C8162",
-"L 	c #ABD796",
-"M 	c #C0E5AE",
-"N 	c #D1ECC4",
-"O 	c #E1F3D9",
-"P 	c #E6F5DF",
-"Q 	c #CEEBC1",
-"R 	c #94D076",
-"S 	c #45AB14",
-"T 	c #3DA20B",
-"U 	c #45A318",
-"V 	c #4BA221",
-"W 	c #529F2D",
-"X 	c #6B7A64",
-"Y 	c #6E717B",
-"Z 	c #272A33",
-"` 	c #333333",
-" .	c #719F5B",
-"..	c #8DD06E",
-"+.	c #9DD682",
-"@.	c #B2DF9C",
-"#.	c #C4E7B4",
-"$.	c #CDEABF",
-"%.	c #B4DFA0",
-"&.	c #6FBE48",
-"*.	c #39A407",
-"=.	c #45A517",
-"-.	c #4FA623",
-";.	c #55A62D",
-">.	c #59A733",
-",.	c #6F8D60",
-"'.	c #7F7F81",
-").	c #2A2B2C",
-"!.	c #3D3D3D",
-"~.	c #57A233",
-"{.	c #5CB82F",
-"].	c #67BE3D",
-"^.	c #75C44F",
-"/.	c #83CA61",
-"(.	c #85CA64",
-"_.	c #66BB3D",
-":.	c #3AA406",
-"<.	c #47A719",
-"[.	c #52A928",
-"}.	c #59AB33",
-"|.	c #5FAA39",
-"1.	c #61AB3D",
-"2.	c #72995F",
-"3.	c #898989",
-"4.	c #353841",
-"5.	c #434343",
-"6.	c #3D9414",
-"7.	c #39A605",
-"8.	c #3AA705",
-"9.	c #3BA708",
-"0.	c #42A811",
-"a.	c #4CAA1F",
-"b.	c #58AD2F",
-"c.	c #60AD39",
-"d.	c #64AD3F",
-"e.	c #64AD41",
-"f.	c #66AD43",
-"g.	c #789D66",
-"h.	c #8F9090",
-"i.	c #3F465D",
-"j.	c #488729",
-"k.	c #42A411",
-"l.	c #44A714",
-"m.	c #47A918",
-"n.	c #4AAA1C",
-"o.	c #4FAA21",
-"p.	c #56AC2C",
-"q.	c #5EAF36",
-"r.	c #63AF3E",
-"s.	c #66AF42",
-"t.	c #66AE43",
-"u.	c #67AE44",
-"v.	c #85A077",
-"w.	c #95969B",
-"x.	c #48557D",
-"y.	c #4B4B4B",
-"z.	c #527541",
-"A.	c #4BA122",
-"B.	c #4EA822",
-"C.	c #53AA27",
-"D.	c #57AC2E",
-"E.	c #5CAE34",
-"F.	c #63AF3C",
-"G.	c #65B041",
-"H.	c #67AF43",
-"I.	c #67AF44",
-"J.	c #6BAC4B",
-"K.	c #9AA794",
-"L.	c #9095A7",
-"M.	c #4C5F9D",
-"N.	c #50535B",
-"O.	c #5B6059",
-"P.	c #5A8844",
-"Q.	c #55A92D",
-"R.	c #5BAB33",
-"S.	c #60AE3A",
-"T.	c #64AE40",
-"U.	c #86AB75",
-"V.	c #B3B3B3",
-"W.	c #7381AD",
-"X.	c #515F8A",
-"Y.	c #626262",
-"Z.	c #6B7467",
-"`.	c #629848",
-" +	c #61AB3C",
-".+	c #7EAC67",
-"++	c #B4BAB1",
-"@+	c #A6ABBA",
-"#+	c #606780",
-"$+	c #777777",
-"%+	c #7F877B",
-"&+	c #749B61",
-"*+	c #68AA48",
-"=+	c #6CAD4C",
-"-+	c #8CB07A",
-";+	c #B9BFB6",
-">+	c #B2B6C1",
-",+	c #5A6EAE",
-"'+	c #657096",
-")+	c #88898E",
-"!+	c #979797",
-"~+	c #94A18D",
-"{+	c #8BA77D",
-"]+	c #85AB73",
-"^+	c #88AD75",
-"/+	c #96B289",
-"(+	c #AFBBA9",
-"_+	c #C7C7C7",
-":+	c #AFB4C3",
-"<+	c #5A6FAE",
-"[+	c #5669A7",
-"}+	c #7D86A3",
-"|+	c #9DA0AA",
-"1+	c #B0B1B3",
-"2+	c #B8B8B8",
-"3+	c #BCBCBD",
-"4+	c #BABCC0",
-"5+	c #A8AEC0",
-"6+	c #7C8AB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # & * . . . . . . ",
-". . . . . = - ; ; > , ' ) ! ~ { . . . . . ",
-". . . . ] ^ ; / ( _ : < [ } | 1 2 . . . . ",
-". . . 3 ^ > 4 5 6 7 8 9 0 a b c d e . . . ",
-". . + - f g h i j k l m n o p q r s t . . ",
-". . @ u v w x 7 y z A B C D E F G H I . . ",
-". . J ' K L M N O P Q R S T U V W X Y . . ",
-". . Z `  ...+.@.#.$.%.&.*.=.-.;.>.,.'.. . ",
-". . ).!.~.{.].^./.(._.:.<.[.}.|.1.2.3.. . ",
-". . 4.5.6.7.8.8.8.9.0.a.b.c.d.e.f.g.h.. . ",
-". . i.d j.k.l.m.n.o.p.q.r.s.t.u.u.v.w.. . ",
-". . x.y.z.A.B.C.D.E.F.G.H.I.u.u.J.K.L.. . ",
-". . M.N.O.P.Q.R.S.T.H.I.u.u.u.u.U.V.W.. . ",
-". . . X.Y.Z.`. +e.t.u.u.u.u.u..+++@+. . . ",
-". . . . #+$+%+&+*+u.u.u.u.=+-+;+>+,+. . . ",
-". . . . . '+)+!+~+{+]+^+/+(+_+:+<+. . . . ",
-". . . . . . [+}+|+1+2+3+4+5+6+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/step-orange-click.xpm b/perl-install/share/step-orange-click.xpm
deleted file mode 100644
index 072f43acb..000000000
--- a/perl-install/share/step-orange-click.xpm
+++ /dev/null
@@ -1,246 +0,0 @@
-/* XPM */
-static char * step_orange_click_xpm[] = {
-"21 21 222 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #455896",
-"* 	c #374570",
-"= 	c #20232D",
-"- 	c #1A1A1A",
-"; 	c #1B1B1B",
-"> 	c #202020",
-", 	c #2A2C34",
-"' 	c #3F4D78",
-") 	c #333F64",
-"! 	c #1A1A1B",
-"~ 	c #1E1E1E",
-"{ 	c #242424",
-"] 	c #282828",
-"^ 	c #2A2A2A",
-"/ 	c #2C2C2C",
-"( 	c #303030",
-"_ 	c #343434",
-": 	c #424C6D",
-"< 	c #303A5A",
-"[ 	c #272626",
-"} 	c #76726D",
-"| 	c #B6AB9E",
-"1 	c #D5BFA6",
-"2 	c #D3B491",
-"3 	c #B18F69",
-"4 	c #7A6144",
-"5 	c #44403C",
-"6 	c #3F3F3F",
-"7 	c #434343",
-"8 	c #4A5370",
-"9 	c #3F3C3A",
-"0 	c #B6AEA5",
-"a 	c #FEEEDB",
-"b 	c #FFE3C3",
-"c 	c #FDD5A7",
-"d 	c #F9C78C",
-"e 	c #F2B46C",
-"f 	c #E6983D",
-"g 	c #A9681D",
-"h 	c #5F5346",
-"i 	c #4F4F4F",
-"j 	c #525459",
-"k 	c #4D619E",
-"l 	c #302F2D",
-"m 	c #B7A796",
-"n 	c #FFE7CB",
-"o 	c #FFD9AD",
-"p 	c #FFC37E",
-"q 	c #FBB059",
-"r 	c #F5A54A",
-"s 	c #ED9B3E",
-"t 	c #E28922",
-"u 	c #D9780A",
-"v 	c #AC712F",
-"w 	c #615D59",
-"x 	c #5E5E5E",
-"y 	c #59627F",
-"z 	c #272727",
-"A 	c #7D6D5B",
-"B 	c #FED5A6",
-"C 	c #FFCF97",
-"D 	c #FFB662",
-"E 	c #FD9D30",
-"F 	c #F78F19",
-"G 	c #EE8814",
-"H 	c #E68515",
-"I 	c #DD7B0A",
-"J 	c #D8790C",
-"K 	c #DA811D",
-"L 	c #937450",
-"M 	c #6A6A6A",
-"N 	c #696C76",
-"O 	c #242730",
-"P 	c #252525",
-"Q 	c #333333",
-"R 	c #B99162",
-"S 	c #FCBF79",
-"T 	c #FCB25D",
-"U 	c #FA9929",
-"V 	c #F6890C",
-"W 	c #F08305",
-"X 	c #E87E04",
-"Y 	c #E07B05",
-"Z 	c #DA7605",
-"` 	c #D97A0E",
-" .	c #DC8422",
-"..	c #BA8548",
-"+.	c #7A7A7A",
-"@.	c #7B7B7D",
-"#.	c #272829",
-"$.	c #2F2F2F",
-"%.	c #3C3C3C",
-"&.	c #D08F45",
-"*.	c #F49B34",
-"=.	c #F28A13",
-"-.	c #ED8105",
-";.	c #E27B04",
-">.	c #DC7804",
-",.	c #D77505",
-"'.	c #D97B10",
-").	c #DD8727",
-"!.	c #CC8E48",
-"~.	c #878787",
-"{.	c #888888",
-"].	c #33363F",
-"^.	c #383838",
-"/.	c #444444",
-"(.	c #C7791F",
-"_.	c #E9891B",
-":.	c #EA8817",
-"<.	c #E78009",
-"[.	c #E47C04",
-"}.	c #E07A04",
-"|.	c #D87504",
-"1.	c #D77607",
-"2.	c #DA7D15",
-"3.	c #DE8B2E",
-"4.	c #CF924F",
-"5.	c #949494",
-"6.	c #939494",
-"7.	c #3F465C",
-"8.	c #404040",
-"9.	c #4A4A4A",
-"0.	c #AD6E26",
-"a.	c #DF7C0A",
-"b.	c #DF7B07",
-"c.	c #DE7905",
-"d.	c #DA7604",
-"e.	c #D77404",
-"f.	c #D8780B",
-"g.	c #DB831F",
-"h.	c #DF9038",
-"i.	c #C99863",
-"j.	c #A0A0A0",
-"k.	c #999BA0",
-"l.	c #47547D",
-"m.	c #494949",
-"n.	c #525252",
-"o.	c #886742",
-"p.	c #DB7F17",
-"q.	c #DA7D13",
-"r.	c #D97A0D",
-"s.	c #D87709",
-"t.	c #D87608",
-"u.	c #DB801A",
-"v.	c #DE8B2F",
-"w.	c #E19440",
-"x.	c #BFA385",
-"y.	c #ADADAD",
-"z.	c #9398AA",
-"A.	c #4B5F9C",
-"B.	c #51545B",
-"C.	c #5A5A5A",
-"D.	c #686460",
-"E.	c #B67D3E",
-"F.	c #DC8626",
-"G.	c #DC8421",
-"H.	c #DB811B",
-"I.	c #DA7F19",
-"J.	c #DC8523",
-"K.	c #DE8C31",
-"L.	c #E0943F",
-"M.	c #D1A16B",
-"N.	c #BAB6B2",
-"O.	c #B8B8B8",
-"P.	c #7381AE",
-"Q.	c #515F8A",
-"R.	c #616161",
-"S.	c #6B6B6B",
-"T.	c #857B6F",
-"U.	c #BF8B52",
-"V.	c #DE9039",
-"W.	c #DF8F36",
-"X.	c #DF8E35",
-"Y.	c #DF8F37",
-"Z.	c #E0923C",
-"`.	c #E19542",
-" +	c #D4A36E",
-".+	c #C5BCB1",
-"++	c #C2C2C2",
-"@+	c #A6ABBB",
-"#+	c #5F677F",
-"$+	c #757575",
-"%+	c #828282",
-"&+	c #928F8B",
-"*+	c #B49879",
-"=+	c #CA9A65",
-"-+	c #D59A5A",
-";+	c #D79C5C",
-">+	c #D2A36F",
-",+	c #CCB092",
-"'+	c #C7C4C0",
-")+	c #C9C9C9",
-"!+	c #B5B8C4",
-"~+	c #5A6EAE",
-"{+	c #647095",
-"]+	c #86878C",
-"^+	c #979797",
-"/+	c #A2A2A2",
-"(+	c #ACACAC",
-"_+	c #B3B3B3",
-":+	c #BBBBBB",
-"<+	c #C8C8C8",
-"[+	c #CACBCB",
-"}+	c #B0B5C4",
-"|+	c #5B6FAF",
-"1+	c #5669A7",
-"2+	c #7C85A3",
-"3+	c #9B9EA8",
-"4+	c #AFB0B2",
-"5+	c #B9B9B9",
-"6+	c #C0C0C1",
-"7+	c #BEBFC4",
-"8+	c #ABB0C2",
-"9+	c #7D8BB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # @ & . . . . . . ",
-". . . . . * = - - - - - ; > , ' . . . . . ",
-". . . . ) ! - - - ~ { ] ^ / ( _ : . . . . ",
-". . . < ! - - [ } | 1 2 3 4 5 6 7 8 . . . ",
-". . + = - - 9 0 a b c d e f g h i j k . . ",
-". . @ - - l m n o p q r s t u v w x y . . ",
-". . # ; z A B C D E F G H I J K L M N . . ",
-". . O P Q R S T U V W X Y Z `  ...+.@.. . ",
-". . #.$.%.&.r *.=.-.X ;.>.,.'.).!.~.{.. . ",
-". . ].^./.(._.:.<.[.}.>.|.1.2.3.4.5.6.. . ",
-". . 7.8.9.0.a.b.c.>.d.e.,.f.g.h.i.j.k.. . ",
-". . l.m.n.o.p.q.r.s.1.t.J u.v.w.x.y.z.. . ",
-". . A.B.C.D.E.F.G.H.I.u.J.K.L.M.N.O.P.. . ",
-". . . Q.R.S.T.U.V.W.X.Y.Z.`. +.+++@+. . . ",
-". . . . #+$+%+&+*+=+-+;+>+,+'+)+!+~+. . . ",
-". . . . . {+]+^+/+(+_+:+++<+[+}+|+. . . . ",
-". . . . . . 1+2+3+4+5+6+7+8+9+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/step-orange-on.xpm b/perl-install/share/step-orange-on.xpm
deleted file mode 100644
index 5775a8606..000000000
--- a/perl-install/share/step-orange-on.xpm
+++ /dev/null
@@ -1,243 +0,0 @@
-/* XPM */
-static char * step_orange_on_xpm[] = {
-"21 21 219 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #36436C",
-"* 	c #465996",
-"= 	c #374570",
-"- 	c #20232D",
-"; 	c #1A1A1A",
-"> 	c #1F1F1F",
-", 	c #252525",
-"' 	c #282828",
-") 	c #272727",
-"! 	c #262626",
-"~ 	c #2C2F36",
-"{ 	c #404E79",
-"] 	c #333F64",
-"^ 	c #1A1A1B",
-"/ 	c #393938",
-"( 	c #8A8882",
-"_ 	c #BEB7AA",
-": 	c #DBCFB5",
-"< 	c #D9C7A0",
-"[ 	c #B7A379",
-"} 	c #847455",
-"| 	c #43413B",
-"1 	c #383838",
-"2 	c #434D6E",
-"3 	c #303A5A",
-"4 	c #535250",
-"5 	c #B3B0A9",
-"6 	c #F5F0E3",
-"7 	c #FFF6E4",
-"8 	c #FFF0D1",
-"9 	c #FCE5B1",
-"0 	c #F7D589",
-"a 	c #E5BA60",
-"b 	c #A2864A",
-"c 	c #59544A",
-"d 	c #474747",
-"e 	c #4B5470",
-"f 	c #202020",
-"g 	c #565552",
-"h 	c #D2CBBD",
-"i 	c #FFF8E9",
-"j 	c #FFF9ED",
-"k 	c #FFF8E8",
-"l 	c #FFF1D3",
-"m 	c #FDE3AE",
-"n 	c #F7D07C",
-"o 	c #EDBA4B",
-"p 	c #E6B44A",
-"q 	c #B89752",
-"r 	c #656157",
-"s 	c #55575B",
-"t 	c #4E619F",
-"u 	c #1C1C1C",
-"v 	c #434240",
-"w 	c #B5AC98",
-"x 	c #FFF2D8",
-"y 	c #FFF9EC",
-"z 	c #FFF9EB",
-"A 	c #FFF2D7",
-"B 	c #FCE2A9",
-"C 	c #F5CA6D",
-"D 	c #ECB849",
-"E 	c #E6B54E",
-"F 	c #E0B354",
-"G 	c #A58D5D",
-"H 	c #636363",
-"I 	c #5B6481",
-"J 	c #2B3248",
-"K 	c #90856F",
-"L 	c #F7E1B2",
-"M 	c #FFEDC6",
-"N 	c #FFF2D6",
-"O 	c #FFF7E4",
-"P 	c #FEF1D3",
-"Q 	c #FBDD9D",
-"R 	c #F2BF55",
-"S 	c #EBB84E",
-"T 	c #E6B755",
-"U 	c #E1B55A",
-"V 	c #D6AF5F",
-"W 	c #857D6E",
-"X 	c #6E717B",
-"Y 	c #272A33",
-"Z 	c #333333",
-"` 	c #BFA979",
-" .	c #FDDD99",
-"..	c #FFE3A7",
-"+.	c #FFE9BA",
-"@.	c #FFEECA",
-"#.	c #FEF0D2",
-"$.	c #FDE8BC",
-"%.	c #EDBA4C",
-"&.	c #E9B955",
-"*.	c #E4B95D",
-"=.	c #E1B862",
-"-.	c #DFB766",
-";.	c #A39474",
-">.	c #7F7F81",
-",.	c #2A2B2C",
-"'.	c #3D3D3D",
-").	c #D7B263",
-"!.	c #F8CC6B",
-"~.	c #FAD175",
-"{.	c #FCD583",
-"].	c #FBD98F",
-"^.	c #FAD990",
-"/.	c #F7CD74",
-"(.	c #EFBB4B",
-"_.	c #EBBC58",
-":.	c #E7BC60",
-"<.	c #E4BC67",
-"[.	c #E2BB6C",
-"}.	c #E1BB6D",
-"|.	c #B6A279",
-"1.	c #898989",
-"2.	c #353841",
-"3.	c #434343",
-"4.	c #CFA64C",
-"5.	c #F1BB4A",
-"6.	c #F3BE4B",
-"7.	c #F4BE4B",
-"8.	c #F1BC4C",
-"9.	c #EEBD53",
-"0.	c #ECBE5D",
-"a.	c #E9BE65",
-"b.	c #E6BF6C",
-"c.	c #E3BD70",
-"d.	c #E1BC70",
-"e.	c #E1BD71",
-"f.	c #B9A67E",
-"g.	c #8F9090",
-"h.	c #3F465D",
-"i.	c #B59552",
-"j.	c #EBBA52",
-"k.	c #EDBC54",
-"l.	c #EEBE57",
-"m.	c #EEBF5A",
-"n.	c #EDBE5E",
-"o.	c #EBBF64",
-"p.	c #E9C06B",
-"q.	c #E7C070",
-"r.	c #E4BE72",
-"s.	c #E2BD72",
-"t.	c #B4A689",
-"u.	c #95969B",
-"v.	c #48557D",
-"w.	c #4B4B4B",
-"x.	c #8E7D58",
-"y.	c #DEB359",
-"z.	c #E8BA5C",
-"A.	c #E9BD61",
-"B.	c #E9C06A",
-"C.	c #E7C06F",
-"D.	c #E6C072",
-"E.	c #E4BF73",
-"F.	c #E2BE73",
-"G.	c #DBB975",
-"H.	c #B0A99C",
-"I.	c #9095A7",
-"J.	c #4C5F9D",
-"K.	c #50535B",
-"L.	c #63615C",
-"M.	c #AA9262",
-"N.	c #E3BA63",
-"O.	c #E5BC68",
-"P.	c #E5BE6D",
-"Q.	c #E5BE71",
-"R.	c #E5BF73",
-"S.	c #E3BE73",
-"T.	c #C5B28C",
-"U.	c #B3B3B3",
-"V.	c #7381AD",
-"W.	c #515F8A",
-"X.	c #626262",
-"Y.	c #7A756D",
-"Z.	c #BFA46B",
-"`.	c #E2BC6E",
-" +	c #E2BD71",
-".+	c #CEB685",
-"++	c #BEBBB5",
-"@+	c #A6ABBA",
-"#+	c #606780",
-"$+	c #777777",
-"%+	c #8D8980",
-"&+	c #B7A37A",
-"*+	c #DAB973",
-"=+	c #DCBA76",
-"-+	c #CAB891",
-";+	c #C4C1BA",
-">+	c #B2B6C1",
-",+	c #5A6EAE",
-"'+	c #657096",
-")+	c #88898E",
-"!+	c #979797",
-"~+	c #ABA496",
-"{+	c #BCAD90",
-"]+	c #C6B38B",
-"^+	c #C8B58E",
-"/+	c #C6B79B",
-"(+	c #C4BEB1",
-"_+	c #C7C7C7",
-":+	c #AFB4C3",
-"<+	c #5A6FAE",
-"[+	c #5669A7",
-"}+	c #7D86A3",
-"|+	c #9DA0AA",
-"1+	c #B0B1B3",
-"2+	c #B8B8B8",
-"3+	c #BCBCBD",
-"4+	c #BABCC0",
-"5+	c #A8AEC0",
-"6+	c #7C8AB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # & * . . . . . . ",
-". . . . . = - ; ; > , ' ) ! ~ { . . . . . ",
-". . . . ] ^ ; / ( _ : < [ } | 1 2 . . . . ",
-". . . 3 ^ > 4 5 6 7 8 9 0 a b c d e . . . ",
-". . + - f g h i j k l m n o p q r s t . . ",
-". . @ u v w x 7 y z A B C D E F G H I . . ",
-". . J ' K L M N O i P Q R S T U V W X . . ",
-". . Y Z `  ...+.@.#.$.n %.&.*.=.-.;.>.. . ",
-". . ,.'.).!.~.{.].^./.(._.:.<.[.}.|.1.. . ",
-". . 2.3.4.5.6.7.6.8.9.0.a.b.c.d.e.f.g.. . ",
-". . h.d i.j.k.l.m.n.o.p.q.r.s.s.s.t.u.. . ",
-". . v.w.x.y.z.A.a.B.C.D.E.F.s.s.G.H.I.. . ",
-". . J.K.L.M.N.O.P.Q.R.S.s.s.s.s.T.U.V.. . ",
-". . . W.X.Y.Z.`. +s.s.s.s.s.s..+++@+. . . ",
-". . . . #+$+%+&+*+s.s.s.s.=+-+;+>+,+. . . ",
-". . . . . '+)+!+~+{+]+^+/+(+_+:+<+. . . . ",
-". . . . . . [+}+|+1+2+3+4+5+6+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/step-orange.xpm b/perl-install/share/step-orange.xpm
deleted file mode 100644
index e87bd6b3a..000000000
--- a/perl-install/share/step-orange.xpm
+++ /dev/null
@@ -1,245 +0,0 @@
-/* XPM */
-static char * step_orange_xpm[] = {
-"21 21 221 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #36436C",
-"* 	c #465996",
-"= 	c #374570",
-"- 	c #20232D",
-"; 	c #1A1A1A",
-"> 	c #1F1F1F",
-", 	c #252525",
-"' 	c #282828",
-") 	c #272727",
-"! 	c #262626",
-"~ 	c #2C2F36",
-"{ 	c #404E79",
-"] 	c #333F64",
-"^ 	c #1A1A1B",
-"/ 	c #393838",
-"( 	c #8A857F",
-"_ 	c #BEB1A3",
-": 	c #DBC3A6",
-"< 	c #D9B58A",
-"[ 	c #B78F61",
-"} 	c #846542",
-"| 	c #433E38",
-"1 	c #383838",
-"2 	c #434D6E",
-"3 	c #303A5A",
-"4 	c #53514F",
-"5 	c #B3ACA5",
-"6 	c #F5E9DC",
-"7 	c #FFEDD9",
-"8 	c #FFE1BE",
-"9 	c #FCCC93",
-"0 	c #F7B15E",
-"a 	c #E58E2B",
-"b 	c #A26929",
-"c 	c #594F44",
-"d 	c #474747",
-"e 	c #4B5470",
-"f 	c #202020",
-"g 	c #565350",
-"h 	c #D2C5B5",
-"i 	c #FFF1E1",
-"j 	c #FFF4E6",
-"k 	c #FFF0DF",
-"l 	c #FFE3C2",
-"m 	c #FDC98E",
-"n 	c #F7A84D",
-"o 	c #ED840C",
-"p 	c #E6800C",
-"q 	c #B8762A",
-"r 	c #655C52",
-"s 	c #55575B",
-"t 	c #4E619F",
-"u 	c #1C1C1C",
-"v 	c #43413E",
-"w 	c #B5A38D",
-"x 	c #FFE6C8",
-"y 	c #FFF3E5",
-"z 	c #FFF2E4",
-"A 	c #FFE5C7",
-"B 	c #FCC788",
-"C 	c #F59E38",
-"D 	c #EC8209",
-"E 	c #E68413",
-"F 	c #E0851B",
-"G 	c #A57641",
-"H 	c #636363",
-"I 	c #5B6481",
-"J 	c #2B3248",
-"K 	c #907A62",
-"L 	c #F7CB98",
-"M 	c #FFDAB0",
-"N 	c #FFE4C5",
-"O 	c #FFEEDA",
-"P 	c #FFF0E0",
-"Q 	c #FEE2C2",
-"R 	c #FBBE79",
-"S 	c #F28D19",
-"T 	c #EB8510",
-"U 	c #E6881B",
-"V 	c #E18925",
-"W 	c #D68830",
-"X 	c #857665",
-"Y 	c #6E717B",
-"Z 	c #272A33",
-"` 	c #333333",
-" .	c #BF925D",
-"..	c #FDBC71",
-"+.	c #FFC684",
-"@.	c #FFD29E",
-"#.	c #FFDDB5",
-"$.	c #FEE1C0",
-"%.	c #FDD2A2",
-"&.	c #F7A74C",
-"*.	c #E9881A",
-"=.	c #E48C27",
-"-.	c #E18E30",
-";.	c #DF8F37",
-">.	c #A38461",
-",.	c #7F7F81",
-"'.	c #2A2B2C",
-").	c #3D3D3D",
-"!.	c #D78C36",
-"~.	c #F89C33",
-"{.	c #FAA441",
-"].	c #FCAD52",
-"^.	c #FBB564",
-"/.	c #FAB567",
-"(.	c #F7A241",
-"_.	c #EF850B",
-":.	c #EB8B1D",
-"<.	c #E7902B",
-"[.	c #E49336",
-"}.	c #E2943C",
-"|.	c #E19440",
-"1.	c #B68D61",
-"2.	c #898989",
-"3.	c #353841",
-"4.	c #434343",
-"5.	c #CF7A18",
-"6.	c #F1850A",
-"7.	c #F3870A",
-"8.	c #F4870A",
-"9.	c #F1870C",
-"0.	c #EE8916",
-"a.	c #EC8E24",
-"b.	c #E99332",
-"c.	c #E6973C",
-"d.	c #E39742",
-"e.	c #E19644",
-"f.	c #E19746",
-"g.	c #B99267",
-"h.	c #8F9090",
-"i.	c #3F465D",
-"j.	c #B5752B",
-"k.	c #EB8716",
-"l.	c #ED8A19",
-"m.	c #EE8C1C",
-"n.	c #EE8D20",
-"o.	c #ED8F26",
-"p.	c #EB922F",
-"q.	c #E99739",
-"r.	c #E79941",
-"s.	c #E49945",
-"t.	c #E29846",
-"u.	c #E29847",
-"v.	c #B49778",
-"w.	c #95969B",
-"x.	c #48557D",
-"y.	c #4B4B4B",
-"z.	c #8E6A42",
-"A.	c #DE8824",
-"B.	c #E88D26",
-"C.	c #E98F2A",
-"D.	c #E99331",
-"E.	c #E99638",
-"F.	c #E7983F",
-"G.	c #E69A44",
-"H.	c #E49946",
-"I.	c #DB974D",
-"J.	c #B0A395",
-"K.	c #9095A7",
-"L.	c #4C5F9D",
-"M.	c #50535B",
-"N.	c #635E59",
-"O.	c #AA7B45",
-"P.	c #E39030",
-"Q.	c #E59337",
-"R.	c #E5963D",
-"S.	c #E59943",
-"T.	c #E59946",
-"U.	c #E39947",
-"V.	c #C59F76",
-"W.	c #B3B3B3",
-"X.	c #7381AD",
-"Y.	c #515F8A",
-"Z.	c #626262",
-"`.	c #7A7168",
-" +	c #BF884B",
-".+	c #E2953F",
-"++	c #E29744",
-"@+	c #CE9E69",
-"#+	c #BEB8B1",
-"$+	c #A6ABBA",
-"%+	c #606780",
-"&+	c #777777",
-"*+	c #8D857B",
-"=+	c #B78F63",
-"-+	c #DA964B",
-";+	c #DC994F",
-">+	c #CAA57B",
-",+	c #C4BDB6",
-"'+	c #B2B6C1",
-")+	c #5A6EAE",
-"!+	c #657096",
-"~+	c #88898E",
-"{+	c #979797",
-"]+	c #AB9D8E",
-"^+	c #BC9F7F",
-"/+	c #C69F74",
-"(+	c #C8A177",
-"_+	c #C6A98A",
-":+	c #C4B7A9",
-"<+	c #C7C7C7",
-"[+	c #AFB4C3",
-"}+	c #5A6FAE",
-"|+	c #5669A7",
-"1+	c #7D86A3",
-"2+	c #9DA0AA",
-"3+	c #B0B1B3",
-"4+	c #B8B8B8",
-"5+	c #BCBCBD",
-"6+	c #BABCC0",
-"7+	c #A8AEC0",
-"8+	c #7C8AB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # & * . . . . . . ",
-". . . . . = - ; ; > , ' ) ! ~ { . . . . . ",
-". . . . ] ^ ; / ( _ : < [ } | 1 2 . . . . ",
-". . . 3 ^ > 4 5 6 7 8 9 0 a b c d e . . . ",
-". . + - f g h i j k l m n o p q r s t . . ",
-". . @ u v w x 7 y z A B C D E F G H I . . ",
-". . J ' K L M N O P Q R S T U V W X Y . . ",
-". . Z `  ...+.@.#.$.%.&.o *.=.-.;.>.,.. . ",
-". . '.).!.~.{.].^./.(._.:.<.[.}.|.1.2.. . ",
-". . 3.4.5.6.7.8.7.9.0.a.b.c.d.e.f.g.h.. . ",
-". . i.d j.k.l.m.n.o.p.q.r.s.t.u.u.v.w.. . ",
-". . x.y.z.A.B.C.D.E.F.G.H.u.u.u.I.J.K.. . ",
-". . L.M.N.O.P.Q.R.S.T.U.u.u.u.u.V.W.X.. . ",
-". . . Y.Z.`. +.+++t.u.u.u.u.u.@+#+$+. . . ",
-". . . . %+&+*+=+-+u.u.u.u.;+>+,+'+)+. . . ",
-". . . . . !+~+{+]+^+/+(+_+:+<+[+}+. . . . ",
-". . . . . . |+1+2+3+4+5+6+7+8+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/step-red-click.xpm b/perl-install/share/step-red-click.xpm
deleted file mode 100644
index ea0101259..000000000
--- a/perl-install/share/step-red-click.xpm
+++ /dev/null
@@ -1,245 +0,0 @@
-/* XPM */
-static char * step_red_click_xpm[] = {
-"21 21 221 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #455896",
-"* 	c #374570",
-"= 	c #20232D",
-"- 	c #1A1A1A",
-"; 	c #1B1B1B",
-"> 	c #202020",
-", 	c #2A2C34",
-"' 	c #3F4D78",
-") 	c #333F64",
-"! 	c #1A1A1B",
-"~ 	c #1E1E1E",
-"{ 	c #242424",
-"] 	c #282828",
-"^ 	c #2A2A2A",
-"/ 	c #2C2C2C",
-"( 	c #303030",
-"_ 	c #343434",
-": 	c #424C6D",
-"< 	c #303A5A",
-"[ 	c #272626",
-"} 	c #766D6C",
-"| 	c #B69F9D",
-"1 	c #D5A9A5",
-"2 	c #D39590",
-"3 	c #B16E68",
-"4 	c #7A4843",
-"5 	c #443D3C",
-"6 	c #3F3F3F",
-"7 	c #434343",
-"8 	c #4A5370",
-"9 	c #3F3A3A",
-"0 	c #B6A6A5",
-"a 	c #FEDDDA",
-"b 	c #FFC7C2",
-"c 	c #FDACA5",
-"d 	c #F9938A",
-"e 	c #F2756A",
-"f 	c #E6483A",
-"g 	c #A9261B",
-"h 	c #5F4745",
-"i 	c #4F4F4F",
-"j 	c #525459",
-"k 	c #4D619E",
-"l 	c #302E2D",
-"m 	c #B79895",
-"n 	c #FFCECA",
-"o 	c #FFB2AB",
-"p 	c #FF857B",
-"q 	c #FB6356",
-"r 	c #F55546",
-"s 	c #ED493B",
-"t 	c #E22E1E",
-"u 	c #D91706",
-"v 	c #AC362C",
-"w 	c #615959",
-"x 	c #5E5E5E",
-"y 	c #59627F",
-"z 	c #272727",
-"A 	c #7D5D5B",
-"B 	c #FEABA4",
-"C 	c #FF9D95",
-"D 	c #FF6C5F",
-"E 	c #FD3D2C",
-"F 	c #F72614",
-"G 	c #EE210F",
-"H 	c #E62211",
-"I 	c #DD1806",
-"J 	c #D81A09",
-"K 	c #DA291A",
-"L 	c #93544F",
-"M 	c #6A6A6A",
-"N 	c #696C76",
-"O 	c #242730",
-"P 	c #252525",
-"Q 	c #333333",
-"R 	c #B96760",
-"S 	c #FC8176",
-"T 	c #FC675A",
-"U 	c #FA3625",
-"V 	c #F61A07",
-"W 	c #F01400",
-"X 	c #E81200",
-"Y 	c #E01301",
-"Z 	c #DA1301",
-"` 	c #D91B0A",
-" .	c #DC2D1E",
-"..	c #BA4F47",
-"+.	c #7A7A7A",
-"@.	c #7B7B7D",
-"#.	c #272829",
-"$.	c #2F2F2F",
-"%.	c #3C3C3C",
-"&.	c #D04D42",
-"*.	c #F44030",
-"=.	c #F2210E",
-"-.	c #ED1300",
-";.	c #E21200",
-">.	c #DC1200",
-",.	c #D71301",
-"'.	c #D91D0C",
-").	c #DD3123",
-"!.	c #CC4F45",
-"~.	c #878787",
-"{.	c #888888",
-"].	c #33363F",
-"^.	c #383838",
-"/.	c #444444",
-"(.	c #C72A1C",
-"_.	c #E92717",
-":.	c #EA2413",
-"<.	c #E71705",
-"[.	c #E41200",
-"}.	c #E01200",
-"|.	c #D81200",
-"1.	c #D71503",
-"2.	c #DA2111",
-"3.	c #DE382B",
-"4.	c #CF564C",
-"5.	c #949494",
-"6.	c #939494",
-"7.	c #3F465C",
-"8.	c #404040",
-"9.	c #4A4A4A",
-"0.	c #AD2E23",
-"a.	c #DF1706",
-"b.	c #DF1503",
-"c.	c #DE1301",
-"d.	c #DA1200",
-"e.	c #D71200",
-"f.	c #D81908",
-"g.	c #DB2B1C",
-"h.	c #DF4134",
-"i.	c #C96861",
-"j.	c #A0A0A0",
-"k.	c #999BA0",
-"l.	c #47547D",
-"m.	c #494949",
-"n.	c #525252",
-"o.	c #884641",
-"p.	c #DB2313",
-"q.	c #DA200F",
-"r.	c #D81605",
-"s.	c #D81504",
-"t.	c #DB2617",
-"u.	c #DE392C",
-"v.	c #E1483D",
-"w.	c #BF8884",
-"x.	c #ADADAD",
-"y.	c #9398AA",
-"z.	c #4B5F9C",
-"A.	c #51545B",
-"B.	c #5A5A5A",
-"C.	c #686060",
-"D.	c #B6453B",
-"E.	c #DC3122",
-"F.	c #DC2C1E",
-"G.	c #DB2718",
-"H.	c #DA2515",
-"I.	c #DC2E1F",
-"J.	c #DE3B2E",
-"K.	c #E0483C",
-"L.	c #D17069",
-"M.	c #BAB2B2",
-"N.	c #B8B8B8",
-"O.	c #7381AE",
-"P.	c #515F8A",
-"Q.	c #616161",
-"R.	c #6B6B6B",
-"S.	c #85706F",
-"T.	c #BF5850",
-"U.	c #DE4235",
-"V.	c #DF3F33",
-"W.	c #DF3E32",
-"X.	c #DF4033",
-"Y.	c #E04539",
-"Z.	c #E14A3F",
-"`.	c #D4746C",
-" +	c #C5B2B1",
-".+	c #C2C2C2",
-"++	c #A6ABBB",
-"@+	c #5F677F",
-"#+	c #757575",
-"$+	c #828282",
-"%+	c #928B8B",
-"&+	c #B47D78",
-"*+	c #CA6A63",
-"=+	c #D56057",
-"-+	c #D76259",
-";+	c #D2746D",
-">+	c #CC9591",
-",+	c #C7C0C0",
-"'+	c #C9C9C9",
-")+	c #B5B8C4",
-"!+	c #5A6EAE",
-"~+	c #647095",
-"{+	c #86878C",
-"]+	c #979797",
-"^+	c #A2A2A2",
-"/+	c #ACACAC",
-"(+	c #B3B3B3",
-"_+	c #BBBBBB",
-":+	c #C8C8C8",
-"<+	c #CACBCB",
-"[+	c #B0B5C4",
-"}+	c #5B6FAF",
-"|+	c #5669A7",
-"1+	c #7C85A3",
-"2+	c #9B9EA8",
-"3+	c #AFB0B2",
-"4+	c #B9B9B9",
-"5+	c #C0C0C1",
-"6+	c #BEBFC4",
-"7+	c #ABB0C2",
-"8+	c #7D8BB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # @ & . . . . . . ",
-". . . . . * = - - - - - ; > , ' . . . . . ",
-". . . . ) ! - - - ~ { ] ^ / ( _ : . . . . ",
-". . . < ! - - [ } | 1 2 3 4 5 6 7 8 . . . ",
-". . + = - - 9 0 a b c d e f g h i j k . . ",
-". . @ - - l m n o p q r s t u v w x y . . ",
-". . # ; z A B C D E F G H I J K L M N . . ",
-". . O P Q R S T U V W X Y Z `  ...+.@.. . ",
-". . #.$.%.&.r *.=.-.X ;.>.,.'.).!.~.{.. . ",
-". . ].^./.(._.:.<.[.}.>.|.1.2.3.4.5.6.. . ",
-". . 7.8.9.0.a.b.c.>.d.e.,.f.g.h.i.j.k.. . ",
-". . l.m.n.o.p.q.` r.1.s.J t.u.v.w.x.y.. . ",
-". . z.A.B.C.D.E.F.G.H.t.I.J.K.L.M.N.O.. . ",
-". . . P.Q.R.S.T.U.V.W.X.Y.Z.`. +.+++. . . ",
-". . . . @+#+$+%+&+*+=+-+;+>+,+'+)+!+. . . ",
-". . . . . ~+{+]+^+/+(+_+.+:+<+[+}+. . . . ",
-". . . . . . |+1+2+3+4+5+6+7+8+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/step-red-on.xpm b/perl-install/share/step-red-on.xpm
deleted file mode 100644
index 820034e55..000000000
--- a/perl-install/share/step-red-on.xpm
+++ /dev/null
@@ -1,245 +0,0 @@
-/* XPM */
-static char * step_red_on_xpm[] = {
-"21 21 221 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #36436C",
-"* 	c #465996",
-"= 	c #374570",
-"- 	c #20232D",
-"; 	c #1A1A1A",
-"> 	c #1F1F1F",
-", 	c #252525",
-"' 	c #282828",
-") 	c #272727",
-"! 	c #262626",
-"~ 	c #2C2F36",
-"{ 	c #404E79",
-"] 	c #333F64",
-"^ 	c #1A1A1B",
-"/ 	c #393838",
-"( 	c #8A8381",
-"_ 	c #BEADA9",
-": 	c #DBBBB3",
-"< 	c #D9A89C",
-"[ 	c #B78275",
-"} 	c #845C51",
-"| 	c #433D3B",
-"1 	c #383838",
-"2 	c #434D6E",
-"3 	c #303A5A",
-"4 	c #535050",
-"5 	c #B3AAA8",
-"6 	c #F5E5E2",
-"7 	c #FFE8E2",
-"8 	c #FFD7CE",
-"9 	c #FCBCAC",
-"0 	c #F79A82",
-"a 	c #E57357",
-"b 	c #A25745",
-"c 	c #594C49",
-"d 	c #474747",
-"e 	c #4B5470",
-"f 	c #202020",
-"g 	c #565251",
-"h 	c #D2C0BC",
-"i 	c #FFECE8",
-"j 	c #FFF0EC",
-"k 	c #FFEBE6",
-"l 	c #FFDAD1",
-"m 	c #FDB9A8",
-"n 	c #F78F75",
-"o 	c #ED6240",
-"p 	c #E66140",
-"q 	c #B8604B",
-"r 	c #655956",
-"s 	c #55575B",
-"t 	c #4E619F",
-"u 	c #1C1C1C",
-"v 	c #43403F",
-"w 	c #B59C97",
-"x 	c #FFDDD5",
-"y 	c #FFEFEB",
-"z 	c #FFEEEA",
-"A 	c #FFDDD4",
-"B 	c #FCB5A3",
-"C 	c #F58265",
-"D 	c #EC603E",
-"E 	c #E66445",
-"F 	c #E0674A",
-"G 	c #A56758",
-"H 	c #636363",
-"I 	c #5B6481",
-"J 	c #2B3248",
-"K 	c #90746D",
-"L 	c #F7BDAF",
-"M 	c #FFCEC2",
-"N 	c #FFDCD3",
-"O 	c #FFE8E3",
-"P 	c #FFECE7",
-"Q 	c #FEDAD0",
-"R 	c #FBAB97",
-"S 	c #F26C4B",
-"T 	c #EB6543",
-"U 	c #E6694C",
-"V 	c #E16D51",
-"W 	c #D67058",
-"X 	c #85716C",
-"Y 	c #6E717B",
-"Z 	c #272A33",
-"` 	c #333333",
-" .	c #BF8374",
-"..	c #FDA792",
-"+.	c #FFB4A1",
-"@.	c #FFC4B5",
-"#.	c #FFD2C7",
-"$.	c #FED8CF",
-"%.	c #FDC5B7",
-"&.	c #F78E74",
-"*.	c #ED6340",
-"=.	c #E96A4C",
-"-.	c #E47054",
-";.	c #E1745A",
-">.	c #DF775F",
-",.	c #A37A71",
-"'.	c #7F7F81",
-").	c #2A2B2C",
-"!.	c #3D3D3D",
-"~.	c #D7755C",
-"{.	c #F88062",
-"].	c #FA896C",
-"^.	c #FC947A",
-"/.	c #FB9F87",
-"(.	c #FAA08A",
-"_.	c #F7886B",
-":.	c #EF6340",
-"<.	c #EB6D4D",
-"[.	c #E77358",
-"}.	c #E4785F",
-"|.	c #E27A63",
-"1.	c #E17D66",
-"2.	c #B68175",
-"3.	c #898989",
-"4.	c #353841",
-"5.	c #434343",
-"6.	c #CF5F43",
-"7.	c #F16340",
-"8.	c #F36541",
-"9.	c #F46541",
-"0.	c #F16542",
-"a.	c #EE6948",
-"b.	c #EC7152",
-"c.	c #E9785D",
-"d.	c #E67D65",
-"e.	c #E38068",
-"f.	c #E17F69",
-"g.	c #E1816B",
-"h.	c #B9867B",
-"i.	c #8F9090",
-"j.	c #3F465D",
-"k.	c #B5604C",
-"l.	c #EB6847",
-"m.	c #ED6A4A",
-"n.	c #EE6D4D",
-"o.	c #EE6F50",
-"p.	c #ED7254",
-"q.	c #EB775C",
-"r.	c #E97C63",
-"s.	c #E78068",
-"t.	c #E4816B",
-"u.	c #E2816B",
-"v.	c #B48F86",
-"w.	c #95969B",
-"x.	c #48557D",
-"y.	c #4B4B4B",
-"z.	c #8E5F54",
-"A.	c #DE6C50",
-"B.	c #E87054",
-"C.	c #E97457",
-"D.	c #E9775D",
-"E.	c #E97B62",
-"F.	c #E77F67",
-"G.	c #E6816A",
-"H.	c #E4826B",
-"I.	c #DB826E",
-"J.	c #B09F9B",
-"K.	c #9095A7",
-"L.	c #4C5F9D",
-"M.	c #50535B",
-"N.	c #635D5B",
-"O.	c #AA6C5D",
-"P.	c #E3745A",
-"Q.	c #E5785F",
-"R.	c #E57D65",
-"S.	c #E58069",
-"T.	c #E5826B",
-"U.	c #E3816B",
-"V.	c #C59488",
-"W.	c #B3B3B3",
-"X.	c #7381AD",
-"Y.	c #515F8A",
-"Z.	c #626262",
-"`.	c #7A6F6C",
-" +	c #BF7666",
-".+	c #E27C65",
-"++	c #E27F69",
-"@+	c #CE8F80",
-"#+	c #BEB6B4",
-"$+	c #A6ABBA",
-"%+	c #606780",
-"&+	c #777777",
-"*+	c #8D8280",
-"=+	c #B78376",
-"-+	c #DA816D",
-";+	c #DC8470",
-">+	c #CA998E",
-",+	c #C4BBBA",
-"'+	c #B2B6C1",
-")+	c #5A6EAE",
-"!+	c #657096",
-"~+	c #88898E",
-"{+	c #979797",
-"]+	c #AB9995",
-"^+	c #BC968D",
-"/+	c #C69387",
-"(+	c #C8958A",
-"_+	c #C6A098",
-":+	c #C4B3B0",
-"<+	c #C7C7C7",
-"[+	c #AFB4C3",
-"}+	c #5A6FAE",
-"|+	c #5669A7",
-"1+	c #7D86A3",
-"2+	c #9DA0AA",
-"3+	c #B0B1B3",
-"4+	c #B8B8B8",
-"5+	c #BCBCBD",
-"6+	c #BABCC0",
-"7+	c #A8AEC0",
-"8+	c #7C8AB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # & * . . . . . . ",
-". . . . . = - ; ; > , ' ) ! ~ { . . . . . ",
-". . . . ] ^ ; / ( _ : < [ } | 1 2 . . . . ",
-". . . 3 ^ > 4 5 6 7 8 9 0 a b c d e . . . ",
-". . + - f g h i j k l m n o p q r s t . . ",
-". . @ u v w x 7 y z A B C D E F G H I . . ",
-". . J ' K L M N O P Q R S T U V W X Y . . ",
-". . Z `  ...+.@.#.$.%.&.*.=.-.;.>.,.'.. . ",
-". . ).!.~.{.].^./.(._.:.<.[.}.|.1.2.3.. . ",
-". . 4.5.6.7.8.9.8.0.a.b.c.d.e.f.g.h.i.. . ",
-". . j.d k.l.m.n.o.p.q.r.s.t.u.u.u.v.w.. . ",
-". . x.y.z.A.B.C.D.E.F.G.H.u.u.u.I.J.K.. . ",
-". . L.M.N.O.P.Q.R.S.T.U.u.u.u.u.V.W.X.. . ",
-". . . Y.Z.`. +.+++u.u.u.u.u.u.@+#+$+. . . ",
-". . . . %+&+*+=+-+u.u.u.u.;+>+,+'+)+. . . ",
-". . . . . !+~+{+]+^+/+(+_+:+<+[+}+. . . . ",
-". . . . . . |+1+2+3+4+5+6+7+8+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/step-red.xpm b/perl-install/share/step-red.xpm
deleted file mode 100644
index e07991540..000000000
--- a/perl-install/share/step-red.xpm
+++ /dev/null
@@ -1,245 +0,0 @@
-/* XPM */
-static char * step_red_xpm[] = {
-"21 21 221 2",
-"  	c None",
-". 	c #4B62AB",
-"+ 	c #435794",
-"@ 	c #35426A",
-"# 	c #293047",
-"$ 	c #20232C",
-"% 	c #1B1B1C",
-"& 	c #36436C",
-"* 	c #465996",
-"= 	c #374570",
-"- 	c #20232D",
-"; 	c #1A1A1A",
-"> 	c #1F1F1F",
-", 	c #252525",
-"' 	c #282828",
-") 	c #272727",
-"! 	c #262626",
-"~ 	c #2C2F36",
-"{ 	c #404E79",
-"] 	c #333F64",
-"^ 	c #1A1A1B",
-"/ 	c #393838",
-"( 	c #8A7F7E",
-"_ 	c #BEA4A2",
-": 	c #DBA9A5",
-"< 	c #D98F88",
-"[ 	c #B7665F",
-"} 	c #844640",
-"| 	c #433938",
-"1 	c #383838",
-"2 	c #434D6E",
-"3 	c #303A5A",
-"4 	c #534F4F",
-"5 	c #B3A5A4",
-"6 	c #F5DDDB",
-"7 	c #FFDBD8",
-"8 	c #FFC2BD",
-"9 	c #FC9A91",
-"0 	c #F7685B",
-"a 	c #E53728",
-"b 	c #A23026",
-"c 	c #594543",
-"d 	c #474747",
-"e 	c #4B5470",
-"f 	c #202020",
-"g 	c #565050",
-"h 	c #D2B7B5",
-"i 	c #FFE2E0",
-"j 	c #FFE8E6",
-"k 	c #FFE1DE",
-"l 	c #FFC6C1",
-"m 	c #FD958C",
-"n 	c #F75749",
-"o 	c #ED1907",
-"p 	c #E61A09",
-"q 	c #B83227",
-"r 	c #655351",
-"s 	c #55575B",
-"t 	c #4E619F",
-"u 	c #1C1C1C",
-"v 	c #433E3E",
-"w 	c #B5908C",
-"x 	c #FFCBC7",
-"y 	c #FFE6E4",
-"z 	c #FFE5E3",
-"A 	c #FFCAC6",
-"B 	c #FC8F86",
-"C 	c #F54434",
-"D 	c #EC1604",
-"E 	c #E6200F",
-"F 	c #E02718",
-"G 	c #A5473F",
-"H 	c #636363",
-"I 	c #5B6481",
-"J 	c #2B3248",
-"K 	c #906562",
-"L 	c #F79E96",
-"M 	c #FFB4AE",
-"N 	c #FFC9C4",
-"O 	c #FFDCD9",
-"P 	c #FFE2DF",
-"Q 	c #FEC6C1",
-"R 	c #FB8176",
-"S 	c #F22614",
-"T 	c #EB1D0B",
-"U 	c #E62718",
-"V 	c #E13021",
-"W 	c #D63A2D",
-"X 	c #856664",
-"Y 	c #6E717B",
-"Z 	c #272A33",
-"` 	c #333333",
-" .	c #BF635B",
-"..	c #FD796E",
-"+.	c #FF8C82",
-"@.	c #FFA49C",
-"#.	c #FFBAB4",
-"$.	c #FEC4BF",
-"%.	c #FDA7A0",
-"&.	c #F75648",
-"*.	c #E92617",
-"=.	c #E43123",
-"-.	c #E13A2D",
-";.	c #DF4033",
-">.	c #A36560",
-",.	c #7F7F81",
-"'.	c #2A2B2C",
-").	c #3D3D3D",
-"!.	c #D74033",
-"~.	c #F83F2F",
-"{.	c #FA4C3D",
-"].	c #FC5D4F",
-"^.	c #FB6D61",
-"/.	c #FA7064",
-"(.	c #F74C3D",
-"_.	c #EF1906",
-":.	c #EB2919",
-"<.	c #E73628",
-"[.	c #E43F33",
-"}.	c #E24539",
-"|.	c #E1483D",
-"1.	c #B6655F",
-"2.	c #898989",
-"3.	c #353841",
-"4.	c #434343",
-"5.	c #CF2314",
-"6.	c #F11805",
-"7.	c #F31805",
-"8.	c #F41805",
-"9.	c #F11B08",
-"0.	c #EE2211",
-"a.	c #EC2F1F",
-"b.	c #E93C2F",
-"c.	c #E64539",
-"d.	c #E34A3F",
-"e.	c #E14C41",
-"f.	c #E14E43",
-"g.	c #B96B66",
-"h.	c #8F9090",
-"i.	c #3F465D",
-"j.	c #B53429",
-"k.	c #EB2211",
-"l.	c #ED2514",
-"m.	c #EE2818",
-"n.	c #EE2C1C",
-"o.	c #ED3121",
-"p.	c #EB392C",
-"q.	c #E94336",
-"r.	c #E7493E",
-"s.	c #E44D42",
-"t.	c #E24E43",
-"u.	c #E24E44",
-"v.	c #B47B77",
-"w.	c #95969B",
-"x.	c #48557D",
-"y.	c #4B4B4B",
-"z.	c #8E4641",
-"A.	c #DE3022",
-"B.	c #E83122",
-"C.	c #E93527",
-"D.	c #E93B2E",
-"E.	c #E94134",
-"F.	c #E7483C",
-"G.	c #E64C41",
-"H.	c #E44E43",
-"I.	c #DB544B",
-"J.	c #B09694",
-"K.	c #9095A7",
-"L.	c #4C5F9D",
-"M.	c #50535B",
-"N.	c #635959",
-"O.	c #AA4B44",
-"P.	c #E33A2D",
-"Q.	c #E54033",
-"R.	c #E5463A",
-"S.	c #E54B40",
-"T.	c #E54E43",
-"U.	c #E34E44",
-"V.	c #C57A75",
-"W.	c #B3B3B3",
-"X.	c #7381AD",
-"Y.	c #515F8A",
-"Z.	c #626262",
-"`.	c #7A6967",
-" +	c #BF5148",
-".+	c #E2483C",
-"++	c #E24C41",
-"@+	c #CE6D67",
-"#+	c #BEB2B1",
-"$+	c #A6ABBA",
-"%+	c #606780",
-"&+	c #777777",
-"*+	c #8D7C7B",
-"=+	c #B76761",
-"-+	c #DA5248",
-";+	c #DC554C",
-">+	c #CA7F7A",
-",+	c #C4B7B6",
-"'+	c #B2B6C1",
-")+	c #5A6EAE",
-"!+	c #657096",
-"~+	c #88898E",
-"{+	c #979797",
-"]+	c #AB8F8D",
-"^+	c #BC817D",
-"/+	c #C67873",
-"(+	c #C87B75",
-"_+	c #C68D89",
-":+	c #C4ABA9",
-"<+	c #C7C7C7",
-"[+	c #AFB4C3",
-"}+	c #5A6FAE",
-"|+	c #5669A7",
-"1+	c #7D86A3",
-"2+	c #9DA0AA",
-"3+	c #B0B1B3",
-"4+	c #B8B8B8",
-"5+	c #BCBCBD",
-"6+	c #BABCC0",
-"7+	c #A8AEC0",
-"8+	c #7C8AB7",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . + @ # $ % $ # & * . . . . . . ",
-". . . . . = - ; ; > , ' ) ! ~ { . . . . . ",
-". . . . ] ^ ; / ( _ : < [ } | 1 2 . . . . ",
-". . . 3 ^ > 4 5 6 7 8 9 0 a b c d e . . . ",
-". . + - f g h i j k l m n o p q r s t . . ",
-". . @ u v w x 7 y z A B C D E F G H I . . ",
-". . J ' K L M N O P Q R S T U V W X Y . . ",
-". . Z `  ...+.@.#.$.%.&.o *.=.-.;.>.,.. . ",
-". . '.).!.~.{.].^./.(._.:.<.[.}.|.1.2.. . ",
-". . 3.4.5.6.7.8.7.9.0.a.b.c.d.e.f.g.h.. . ",
-". . i.d j.k.l.m.n.o.p.q.r.s.t.u.u.v.w.. . ",
-". . x.y.z.A.B.C.D.E.F.G.H.u.u.u.I.J.K.. . ",
-". . L.M.N.O.P.Q.R.S.T.U.u.u.u.u.V.W.X.. . ",
-". . . Y.Z.`. +.+++t.u.u.u.u.u.@+#+$+. . . ",
-". . . . %+&+*+=+-+u.u.u.u.;+>+,+'+)+. . . ",
-". . . . . !+~+{+]+^+/+(+_+:+<+[+}+. . . . ",
-". . . . . . |+1+2+3+4+5+6+7+8+. . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . ",
-". . . . . . . . . . . . . . . . . . . . . "};
diff --git a/perl-install/share/theme-editor.pl b/perl-install/share/theme-editor.pl
deleted file mode 100755
index fba31a346..000000000
--- a/perl-install/share/theme-editor.pl
+++ /dev/null
@@ -1,161 +0,0 @@
-#!/usr/bin/perl -w
-
-# Theme editor
-
-# Copyright (C) 1999 damien@mandrakesoft.com
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX);
-use my_gtk qw(:helpers :wrappers);
-use common;
-
-init Gtk;
-
-if ("@ARGV" =~ /-h/) {
-    print q(DrakX theme editor by dam's.
-
-Options :
-    -f specify the input theme file. Default is themes-mdk.rc
-    -o specify the output file. Default is input file.
-    -h print this help.
-)
-}
-my ($file) = "@ARGV" =~ /-f (.+)/;
-my ($file2) = "@ARGV" =~ /-o (.+)/;
-$file ||= "themes-mdk.rc";
-$file2 ||= $file;
-my $window1 = new Gtk::Window -toplevel;
-$window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-$window1->set_title(_("Theme editor"));
-$window1->set_policy(0, 1, 0);
-$window1->set_border_width(5);
-gtkadd($window1, my $vb = new Gtk::VBox(0,5));
-$window1->show_all;
-$window1->realize;
-my $f;
-my $vb2;
-my $hb;
-my $style;
-my $ref = 0;
-my %color;
-my $cpt = 0;
-my $do_style;
-foreach (cat_($file)) {
-    chomp;
-    if(/style "(.*)"/) {
-	$style = $1;
-	print " -- $style \n";
-	$do_style = 1;
-    }
-    if(/(\w+)\[(\w+)\]\s*=\s*\{\s*([0-9\.]+)\s*,\s*([0-9\.]+)\s*,\s*([0-9\.]+)\s*\}/) {
-	my ($a1, $a2) = ($1, $2);
-	my $style2 = $style;
-	if ($do_style) {
-	    $cpt == 0 and gtkpack__($vb, $hb = new Gtk::HBox(0,5));
-	    $cpt++;
-	    $cpt == 4 and $cpt = 0;
-	    gtkpack__($hb,
-		      gtkadd(gtkset_shadow_type($f = new Gtk::Frame(" $style "), 'etched_out'),
-			     $vb2 = gtkset_border_width(new Gtk::VBox(0,5),5)
-			    )
-		     );
-	    $do_style = 0;
-	}
-	my $c =my_gtk::gtkcolor($3*65535, $4*65535, $5*65535);
-	$color{$style}{$1}{$2} = $c;
-	my $gc = new Gtk::Gdk::GC($window1->window);
-	$gc->set_foreground($c);
-	gtkpack__($vb2,
-		  gtkpack_(new Gtk::HBox(0,0),
-			   1, gtkpack__(new Gtk::HBox(0,0),"$1 [$2] : "),
-			   0, gtksignal_connect(gtkset_relief(my $b = new Gtk::Button(), 'none'), clicked => sub {
-						    $c = change_color($c);
-						    $gc->set_foreground($c);
-						    $color{$style2}{$a1}{$a2} = $c;
-						    $_[0]->draw(undef);
-						})
-			  )
-		 );
-	$b->add(gtksignal_connect(gtksize(gtkset_usize(new Gtk::DrawingArea(), 60, 20), 60, 20), expose_event => sub{ $_[0]->window->draw_rectangle ($gc, 1, 0, 0, 60, 20)} ));
-    }
-    /\{/ and $ref++;
-    if (/\}/) { $ref--; $ref == 0 and undef $style }
-}
-gtkpack__($vb,
-	  gtkadd(gtkset_layout(new Gtk::HButtonBox, -end),
-			      gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { doit(); Gtk->main_quit() }),
-			      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { Gtk->main_quit() }),
-			     )
-	 );
-
-$window1->set_position(1);
-$window1->show_all;
-Gtk->main;
-Gtk->exit(0);
-
-sub doit {
-    system("rm -f /tmp/plop");
-    foreach (cat_($file)) {
-	my $output;
-	chomp;
-	if(/style "(.*)"/) {
-	    $style = $1;
-	    $do_style = 1;
-	}
-	if(/(\w+)\[(\w+)\]\s*=\s*\{\s*([0-9\.]+)\s*,\s*([0-9\.]+)\s*,\s*([0-9\.]+)\s*\}/) {
-	    #	print " - $_ - \n" foreach ($1, $2, $3, $4, $5);
-	    my ($a1, $a2) = ($1, $2);
-	    my $c = $color{$style}{$1}{$2};
-	    $output = $1 . "[" . $2 . "] = { " .
-	      round($c->red()/65535*100)/100 . ", " . round($c->green()/65535*100)/100 . ", " . round($c->blue()/65535*100)/100 . " }";
-	}
-	/\{/ and $ref++;
-	if (/\}/) { $ref--; $ref == 0 and undef $style }
-	$output ||= $_;
-	$output =~ s/ 1 / 1.0 /;
-	$output =~ s/ 1, / 1.0, /;
-	$output =~ s/ 1, / 1.0, /;
-	system("echo '$output' >> /tmp/plop");
-    }
-    system("mv -f /tmp/plop $file2");
-}
-
-sub change_color {
-    my ($color) = @_;
-    my $window = new Gtk::Window -toplevel;
-    my $doit;
-    $window->signal_connect ( delete_event => sub { Gtk->main_quit() });
-    $window->set_position(1);
-    $window->set_title(_("Color configuration"));
-    $window->set_border_width(5);
-    gtkadd(gtkset_modal($window,1),
-	   gtkpack_(new Gtk::VBox(0,5),
-		    1, my $colorsel = new Gtk::ColorSelection,
-		    0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -end),
-			      gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { $doit=1; Gtk->main_quit() }),
-			      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { Gtk->main_quit() }),
-			     )
-		   )
-	  );
-    $colorsel->set_color($color->red()/65535, $color->green()/65535, $color->blue()/65535, $color->pixel());
-    $window->show_all();
-    Gtk->main;
-    $window->destroy();
-    $doit or return $color;
-    my (@color) = $colorsel->get_color();
-    my_gtk::gtkcolor($color[0]*65535, $color[1]*65535, $color[2]*65535);
-}
diff --git a/perl-install/share/themes-blackwhite.rc b/perl-install/share/themes-blackwhite.rc
deleted file mode 100644
index 112d2ea42..000000000
--- a/perl-install/share/themes-blackwhite.rc
+++ /dev/null
@@ -1,62 +0,0 @@
-style "any"
-{
-  base[NORMAL]    = { 0.67, 0.67, 0.67 }
-  bg[NORMAL]      = { 0.67, 0.67, 0.67 }
-  bg[INSENSITIVE] = { 0.67, 0.67, 0.67 }
-  base[INSENSITIVE]={ 0.67, 0.67, 0.67 }
-  bg[ACTIVE]      = { 0, 0, 0 }
-  bg[PRELIGHT]    = { 0, 0, 0 }
-  
-  text[NORMAL] 	  = { 1.0, 1.0, 1.0 }
-  fg[NORMAL]  	  = { 1.0, 1.0, 1.0 }
-  fg[ACTIVE]  	  = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT]    = { 1.0, 1.0, 1.0 }
-  fg[INSENSITIVE] = { 0.0, 0.0, 0.0 }
-  text[INSENSITIVE]={ 1.0, 1.0, 1.0 }
-
-  bg[SELECTED]    = { 1.0, 1.0, 1.0 }
-  fg[SELECTED]    = { 0, 0, 0 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 1.0, 1.0, 1.0 }
-  base[ACTIVE] = { 1.0, 1.0, 1.0 }
-  fg[NORMAL] = { 0.67, 0.67, 0.67 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  bg[ACTIVE]	  = { 0.67, 0.67, 0.67 }
-  fg[NORMAL]      = { 0, 0, 0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  fg[NORMAL] = { 0, 0, 0 }
-  bg[PRELIGHT] = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-}
-
-style "steps"
-{
-  bg[NORMAL] = { 0, 0, 0 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton*" style "button"
-widget "*background*" style "background"
diff --git a/perl-install/share/themes-blue.rc b/perl-install/share/themes-blue.rc
deleted file mode 100644
index 0c1e7d318..000000000
--- a/perl-install/share/themes-blue.rc
+++ /dev/null
@@ -1,62 +0,0 @@
-style "any"
-{
-  base[NORMAL]	  = { 0, 0, 0.67 }
-  bg[NORMAL]      = { 0, 0, 0.67 }
-  bg[INSENSITIVE] = { 0, 0, 0.67 }
-  base[INSENSITIVE]={ 0, 0, 0.67 }
-  bg[ACTIVE]      = { 0, 0.67, 1.0 }
-  bg[PRELIGHT]    = { 0, 0, 1.0 }
-  
-  text[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  fg[NORMAL]  	  = { 1.0, 1.0, 1.0 }
-  fg[INSENSITIVE] = { 0.0, 0.0, 0.0 }
-  text[INSENSITIVE]={ 1.0, 1.0, 1.0 }
-  fg[ACTIVE]  	  = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT]    = { 1.0, 1.0, 1.0 }
-
-  bg[SELECTED] = { 1.0, 1.0, 1.0 }
-  fg[SELECTED] = { 0, 0, 1.0 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 0, 1.0, 1.0 }
-  base[ACTIVE] = { 0, 1.0, 1.0 }
-  fg[NORMAL]   = { 0.67, 0, 0.67 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]      = { 0, 0, 1.0 }
-  bg[ACTIVE]      = { 0, 0, 0.67 }
-  fg[NORMAL]      = { 1.0, 1.0, 1.0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 0, 0, 1.0 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0, 0, 1.0 }
-  fg[PRELIGHT] = { 0, 1.0, 1.0 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 0, 0.67, 0.99 }
-  bg[PRELIGHT] = { 0, 0, 0.67 }
-}
-
-style "steps"
-{
-  bg[NORMAL] = { 0, 0, 1.0 }
-  fg[NORMAL] = { 1.0, 1.0, 0 }
-}
-
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton*" style "button"
-widget "*background*" style "background"
diff --git a/perl-install/share/themes-marble3d.rc b/perl-install/share/themes-marble3d.rc
deleted file mode 100644
index 78a441049..000000000
--- a/perl-install/share/themes-marble3d.rc
+++ /dev/null
@@ -1,208 +0,0 @@
-style "checkradiobutton" {
-  engine "pixmap" {
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "marble3d-check1.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "marble3d-check2.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "marble3d-check1.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "marble3d-check2.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-  }
-}
-
-style "button"
-{
-  engine "pixmap" 
-    {
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	detail          = "buttondefault"
-	shadow          = IN
-	file            = "marble3d-button_def.png"
-	border          = { 9, 9, 9, 9 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = OUT
-	file            = "marble3d-button1.png"
-	border          = { 3, 3, 3, 3 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = PRELIGHT
-	shadow          = OUT
-	file            = "marble3d-button2.png"
-	border          = { 3, 3, 3, 3 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = IN
-	file            = "marble3d-button4.png"
-	border          = { 2, 2, 2, 2 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = SELECTED
-	shadow          = IN
-	file            = "marble3d-button4.png"
-	border          = { 3, 3, 3, 3 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = ACTIVE
-	shadow          = IN
-	file            = "marble3d-button4.png"
-	border          = { 3, 3, 3, 3 }
-	stretch         = TRUE
-      }
-   }
-}
-
-style "window" 
-{
-  engine "pixmap" {
-    image 
-      {
-	function        = FLAT_BOX
-	recolorable     = TRUE
-	file            = "marble3d-bg1.png"
-	stretch         = FALSE
-      }
-  }
-}
-
-
-style "any"
-{
-text[NORMAL] = { 0, 0, 0 }
-fg[NORMAL] = { 0, 0, 0 }
-fg[PRELIGHT] = { 0.25, 0.25, 0.25 }
-fg[ACTIVE] = { 0, 0, 0 }
-fg[SELECTED] = { 0, 0, 0 }
-fg[INSENSITIVE] = { 0.5, 0.5, 0.5 }
-  
-base[NORMAL] = { 0.75, 0.75, 0.75 }
-bg[NORMAL] = { 0.8, 0.8, 0.8 }
-bg[PRELIGHT] = { 0.85, 0.85, 0.85 }
-bg[ACTIVE] = { 0.9, 0.9, 0.9 }
-bg[SELECTED] = { 0.9, 0.8, 0.7 }
-bg[INSENSITIVE] = { 0.8, 0.75, 0.7 }
-}
-
-style "entry"
-{
-base[NORMAL] = { 1.0, 1.0, 1.0 }
-base[ACTIVE] = { 1.0, 1.0, 1.0 }
-fg[NORMAL] = { 0, 0, 0 }
-}
-
-style "notebook"
-{
-bg[NORMAL] = { 0.82, 0.8, 0.8 }
-bg[ACTIVE] = { 0.72, 0.7, 0.7 }
-fg[NORMAL] = { 0, 0, 0 }
-}
-
-style "button" = "any"
-{
-bg[NORMAL] = { 1.0, 1.0, 1.0 }
-fg[NORMAL] = { 0, 0, 0 }
-bg[PRELIGHT] = { 1.0, 1.0, 1.0 }
-fg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-}
-
-style "background"
-{
-bg[NORMAL] = { 0.8, 0.8, 0.8 }
-bg[PRELIGHT] = { 0.74, 0.72, 0.7 }
-}
-
-
-style "steps"
-{
-fg[NORMAL] = { 0.4, 0.3, 0.2 }
-
-  engine "pixmap" {
-    image 
-      {
-	function        = FLAT_BOX
-	recolorable     = TRUE
-	file            = "marble3d-bg1.png"
-	stretch         = FALSE
-      }
-  }
-}
-
-widget_class "GtkWindow" style "window"
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton" style "button"
-widget "*background*" style "background"
-
-class "GtkRadioButton" style "checkradiobutton"
-class "GtkCheckButton" style "checkradiobutton"
diff --git a/perl-install/share/themes-mdk-Desktop.rc b/perl-install/share/themes-mdk-Desktop.rc
deleted file mode 100644
index 12ecb86b5..000000000
--- a/perl-install/share/themes-mdk-Desktop.rc
+++ /dev/null
@@ -1,203 +0,0 @@
-style "checkradiobutton" {
-  engine "pixmap" {
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "mdk-check_off.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "mdk-check_on.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "mdk-toggle_off.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "mdk-toggle_on.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-  }
-}
-
-style "button"
-{
-  bg[NORMAL] = "#909090"
-
-  engine "pixmap" 
-    {
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	detail          = "buttondefault"
-	shadow          = IN
-	file            = "blueHeart-button_def.png"
-	border          = { 9, 9, 9, 9 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = OUT
-	file            = "mdk-button1.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = PRELIGHT
-	shadow          = OUT
-	file            = "mdk-button1.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = SELECTED
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = ACTIVE
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-   }
-}
-
-style "window" 
-{
-  engine "pixmap" {
-    image 
-      {
-	function        = FLAT_BOX
-	recolorable     = TRUE
-	file            = "mdk-Desktop-bg.png"
-	stretch         = FALSE
-      }
-  }
-}
-
-style "any"
-{
-  base[NORMAL]	  = { 0.6, 0.6, 0.8 }
-  bg[NORMAL]      = { 0.6, 0.6, 0.8 }
-  bg[INSENSITIVE] = { 0.2, 0.2, 0.4 }
-  base[INSENSITIVE]={ 0.2, 0.2, 0.4 }
-  bg[ACTIVE]      = { 0.2, 0.2, 0.4 }
-  bg[PRELIGHT]    = { 0.4, 0.4, 0.6 }
-  
-  text[NORMAL]	  = { 0, 0, 0 }
-  fg[NORMAL]  	  = { 1.0, 1.0, 1.0 }
-  fg[INSENSITIVE] = { 0.0, 0.0, 0.0 }
-  text[INSENSITIVE]={ 1.0, 1.0, 1.0 }
-  fg[ACTIVE]  	  = { 1.0, 1.0, 1.0 }
-  fg[PRELIGHT]    = { 0.8, 0.8, 1.0 }
-
-  bg[SELECTED] = { 1.0, 1.0, 1.0 }
-  fg[SELECTED] = { 0.6, 0.6, 0.8 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 0.4, 0.4, 0.6 }
-  base[ACTIVE] = { 0.4, 0.4, 0.6 }
-  fg[NORMAL]   = { 1.0, 1.0, 1.0 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]      = { 0.4, 0.4, 0.6 }
-  bg[ACTIVE]      = { 0.2, 0.2, 0.4 }
-  fg[NORMAL]      = { 1.0, 1.0, 1.0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 0.4, 0.4, 0.6 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.36, 0.36, 0.56 }
-  fg[PRELIGHT] = { 0.8, 0.8, 1.0 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 0.2, 0.2, 0.4 }
-  bg[PRELIGHT] = { 0.8, 0.8, 0.99 }
-}
-
-style "steps"
-{
-  engine "pixmap" { image { function = FLAT_BOX } }
-  bg[NORMAL] = { 0.4, 0.4, 0.6 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-widget_class "GtkWindow" style "window"
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton" style "button"
-widget "*background*" style "background"
-
-class "GtkRadioButton" style "checkradiobutton"
-class "GtkCheckButton" style "checkradiobutton"
diff --git a/perl-install/share/themes-mdk.rc b/perl-install/share/themes-mdk.rc
deleted file mode 100644
index ca17576d3..000000000
--- a/perl-install/share/themes-mdk.rc
+++ /dev/null
@@ -1,225 +0,0 @@
-style "checkradiobutton" {
-  engine "pixmap" {
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "mdk-check_off.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = CHECK
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "mdk-check_on.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = OUT
-	overlay_file    = "mdk-toggle_off.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = OPTION
-	recolorable     = TRUE
-	shadow          = IN
-	overlay_file    = "mdk-toggle_on.png"
-	overlay_stretch = FALSE
-      }
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-  }
-}
-
-style "button"
-{
-  bg[NORMAL] = "#909090"
-
-  engine "pixmap" 
-    {
-    image 
-      {
-        function        = FOCUS
-	recolorable     = TRUE
-	overlay_file    = "focus.png"
-	overlay_border  = { 4, 4, 4, 4 }
-	overlay_stretch = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	detail          = "buttondefault"
-	shadow          = IN
-	file            = "blueHeart-button_def.png"
-	border          = { 9, 9, 9, 9 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = OUT
-	file            = "mdk-button1.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = PRELIGHT
-	shadow          = OUT
-	file            = "mdk-button1.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = NORMAL
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = SELECTED
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-    image 
-      {
-        function        = BOX
-	recolorable     = TRUE
-	state           = ACTIVE
-	shadow          = IN
-	file            = "mdk-button4.png"
-	border          = { 7, 7, 7, 7 }
-	stretch         = TRUE
-      }
-   }
-}
-
-style "window" 
-{
-  engine "pixmap" {
-    image 
-      {
-	function        = FLAT_BOX
-	recolorable     = TRUE
-	file            = "mdk-bg.png"
-	stretch         = FALSE
-      }
-  }
-}
-
-style "any"
-{
-base[NORMAL] = { 0.13, 0.27, 0.61 }
-bg[NORMAL] = { 0.13, 0.27, 0.61 }
-bg[INSENSITIVE] = { 0.46, 0.51, 0.74 }
-base[INSENSITIVE] = { 0.46, 0.51, 0.74 }
-bg[ACTIVE] = { 0.46, 0.51, 0.74 }
-bg[PRELIGHT] = { 0.17, 0.33, 0.75 }
-  
-text[NORMAL] = { 1.0, 1.0, 1.0 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-fg[INSENSITIVE] = { 1.0, 1.0, 1.0 }
-text[INSENSITIVE] = { 1.0, 1.0, 1.0 }
-fg[ACTIVE] = { 1.0, 1.0, 1.0 }
-fg[PRELIGHT] = { 0.72, 0.74, 0.86 }
-
-bg[SELECTED] = { 1.0, 1.0, 1.0 }
-fg[SELECTED] = { 0.13, 0.27, 0.61 }
-}
-
-style "drawing"
-{
-base[NORMAL] = { 0.29, 0.38, 0.67 }
-bg[NORMAL] = { 0.29, 0.38, 0.67 }
-bg[INSENSITIVE] = { 0.13, 0.27, 0.61 }
-base[INSENSITIVE] = { 0.13, 0.27, 0.61 }
-bg[ACTIVE] = { 0.13, 0.27, 0.61 }
-bg[PRELIGHT] = { 0.29, 0.38, 0.67 }
-  
-bg[SELECTED] = { 1.0, 1.0, 1.0 }
-fg[SELECTED] = { 1.0, 1.0, 1.0 }
-}
-
-style "entry"
-{
-base[NORMAL] = { 0.29, 0.38, 0.67 }
-base[ACTIVE] = { 0.13, 0.27, 0.61 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-style "tooltips"
-{
-base[NORMAL] = { 0.96, 0.81, 0.21 }
-base[ACTIVE] = { 0.96, 0.81, 0.21 }
-fg[NORMAL] = { 0, 0, 0 }
-}
-
-style "notebook"
-{
-bg[NORMAL] = { 0.29, 0.38, 0.67 }
-bg[ACTIVE] = { 0.13, 0.27, 0.61 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-style "button" = "any"
-{
-bg[NORMAL] = { 0.13, 0.27, 0.61 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-bg[PRELIGHT] = { 0.46, 0.51, 0.74 }
-fg[PRELIGHT] = { 0.72, 0.74, 0.86 }
-}
-
-style "background"
-{
-bg[NORMAL] = { 0.29, 0.38, 0.67 }
-bg[PRELIGHT] = { 0.72, 0.74, 0.86 }
-}
-
-style "steps"
-{
-  engine "pixmap" { image { function = FLAT_BOX } }
-bg[NORMAL] = { 0.29, 0.38, 0.67 }
-fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-widget_class "GtkWindow" style "window"
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkTooltips*" style "tooltips"
-widget_class "*GtkDrawingArea*" style "drawing"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton" style "button"
-widget "*background*" style "background"
-
-class "GtkRadioButton" style "checkradiobutton"
-class "GtkCheckButton" style "checkradiobutton"
diff --git a/perl-install/share/themes-savane.rc b/perl-install/share/themes-savane.rc
deleted file mode 100644
index aed22ac41..000000000
--- a/perl-install/share/themes-savane.rc
+++ /dev/null
@@ -1,62 +0,0 @@
-style "any"
-{
-  base[NORMAL]	  = { 0.67, 0.33, 0 }
-  bg[NORMAL]	  = { 0.67, 0.33, 0 }
-  bg[INSENSITIVE] = { 0.67, 0.33, 0 }
-  base[INSENSITIVE]={ 0.67, 0.33, 0 }
-  bg[ACTIVE]	  = { 1.0, 0.67, 0 }
-  bg[PRELIGHT]	  = { 1.0, 1.0, 0 }
-  
-  text[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  fg[NORMAL]	  = { 1.0, 1.0, 1.0 }
-  fg[ACTIVE]	  = { 0, 0, 0 }
-  fg[PRELIGHT]	  = { 0, 0, 0 }
-  fg[INSENSITIVE] = { 0, 0, 0 }
-  text[INSENSITIVE]={ 0, 0, 0 }
-
-  bg[SELECTED]    = { 1.0, 1.0, 1.0 }
-  fg[SELECTED]    = { 0.67, 0.33, 0 }
-}
-
-style "entry"
-{
-  base[NORMAL] = { 1.0, 1.0, 1.0 }
-  base[ACTIVE] = { 1.0, 1.0, 1.0 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-
-style "notebook"
-{
-  bg[NORMAL]	  = { 1.0, 0.67, 0 }
-  bg[ACTIVE]	  = { 0.67, 0.33, 0 }
-  fg[NORMAL]      = { 0, 0, 0 }
-}
-
-style "button" = "any"
-{
-  bg[NORMAL] = { 1.0, 0.67, 0 }
-  fg[NORMAL] = { 0, 0, 0 }
-  bg[PRELIGHT] = { 1.0, 1.0, 0 }
-  fg[PRELIGHT] = { 0, 0, 0 }
-}
-
-style "background"
-{
-  bg[NORMAL] = { 1.0, 0.67, 0 }
-  bg[PRELIGHT] = { 0.67, 0.33, 0 }
-}
-
-style "steps"
-{
-  bg[NORMAL] = { 0, 0, 0 }
-  fg[NORMAL] = { 1.0, 1.0, 1.0 }
-}
-
-widget_class "*" style "any"
-widget_class "*GtkSpin*" style "entry"
-widget_class "*GtkEntry*" style "entry"
-widget_class "*Gtk*List*" style "entry"
-widget_class "*GtkCTree*" style "entry"
-widget_class "*GtkNotebook*" style "notebook"
-widget "*GtkButton*" style "button"
-widget "*background*" style "background"
diff --git a/perl-install/share/themes.rc b/perl-install/share/themes.rc
deleted file mode 100644
index f662c5bc0..000000000
--- a/perl-install/share/themes.rc
+++ /dev/null
@@ -1,30 +0,0 @@
-style "mdk"
-{
-bg[NORMAL] = { 0.3, 0.38, 0.67 }
-bg[PRELIGHT] = { 0.45, 0.51, 0.74 }
-}
-style "marble3d"
-{
-bg[NORMAL] = { 0.8, 0.8, 0.8 }
-bg[PRELIGHT] = { 0.9, 0.9, 0.9 }
-}
-style "savane"
-{
-bg[NORMAL] = { 1.0, 0.67, 0 }
-bg[PRELIGHT] = { 0.67, 0.33, 0 }
-}
-style "blackwhite"
-{
-bg[NORMAL] = { 0.67, 0.67, 0.67 }
-bg[PRELIGHT] = { 1.0, 1.0, 1.0 }
-}
-style "blue"
-{
-bg[NORMAL] = { 0, 0, 0.67 }
-bg[PRELIGHT] = { 0, 0, 1.0 }
-}
-widget "*mdk*" style "mdk"
-widget "*marble3d*" style "marble3d"
-widget "*savane*" style "savane"
-widget "*blackwhite*" style "blackwhite"
-widget "*blue*" style "blue"
diff --git a/perl-install/share/themes/blueHeart-button_def.png b/perl-install/share/themes/blueHeart-button_def.png
deleted file mode 100644
index b35781416..000000000
--- a/perl-install/share/themes/blueHeart-button_def.png
+++ /dev/null
diff --git a/perl-install/share/themes/focus.png b/perl-install/share/themes/focus.png
deleted file mode 100644
index 70afb1797..000000000
--- a/perl-install/share/themes/focus.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-bg1.png b/perl-install/share/themes/marble3d-bg1.png
deleted file mode 100644
index b4e1afd66..000000000
--- a/perl-install/share/themes/marble3d-bg1.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-button1.png b/perl-install/share/themes/marble3d-button1.png
deleted file mode 100644
index 9119ac89c..000000000
--- a/perl-install/share/themes/marble3d-button1.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-button2.png b/perl-install/share/themes/marble3d-button2.png
deleted file mode 100644
index 70696538c..000000000
--- a/perl-install/share/themes/marble3d-button2.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-button4.png b/perl-install/share/themes/marble3d-button4.png
deleted file mode 100644
index 7b6aae23a..000000000
--- a/perl-install/share/themes/marble3d-button4.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-button_def.png b/perl-install/share/themes/marble3d-button_def.png
deleted file mode 100644
index 4bd67d0d9..000000000
--- a/perl-install/share/themes/marble3d-button_def.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-check1.png b/perl-install/share/themes/marble3d-check1.png
deleted file mode 100644
index f3c31d09c..000000000
--- a/perl-install/share/themes/marble3d-check1.png
+++ /dev/null
diff --git a/perl-install/share/themes/marble3d-check2.png b/perl-install/share/themes/marble3d-check2.png
deleted file mode 100644
index 5261472f9..000000000
--- a/perl-install/share/themes/marble3d-check2.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-Desktop-bg.png b/perl-install/share/themes/mdk-Desktop-bg.png
deleted file mode 100644
index 14db97364..000000000
--- a/perl-install/share/themes/mdk-Desktop-bg.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-bg.png b/perl-install/share/themes/mdk-bg.png
deleted file mode 100644
index 69754ee04..000000000
--- a/perl-install/share/themes/mdk-bg.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-button1.png b/perl-install/share/themes/mdk-button1.png
deleted file mode 100644
index bc4d2e674..000000000
--- a/perl-install/share/themes/mdk-button1.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-button4.png b/perl-install/share/themes/mdk-button4.png
deleted file mode 100644
index e85c86748..000000000
--- a/perl-install/share/themes/mdk-button4.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-check_off.png b/perl-install/share/themes/mdk-check_off.png
deleted file mode 100644
index 74778fc11..000000000
--- a/perl-install/share/themes/mdk-check_off.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-check_on.png b/perl-install/share/themes/mdk-check_on.png
deleted file mode 100644
index f3a099909..000000000
--- a/perl-install/share/themes/mdk-check_on.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-toggle_off.png b/perl-install/share/themes/mdk-toggle_off.png
deleted file mode 100644
index 74778fc11..000000000
--- a/perl-install/share/themes/mdk-toggle_off.png
+++ /dev/null
diff --git a/perl-install/share/themes/mdk-toggle_on.png b/perl-install/share/themes/mdk-toggle_on.png
deleted file mode 100644
index f3a099909..000000000
--- a/perl-install/share/themes/mdk-toggle_on.png
+++ /dev/null
diff --git a/perl-install/share/verify_modules.pl b/perl-install/share/verify_modules.pl
deleted file mode 100755
index 52b6ae8fc..000000000
--- a/perl-install/share/verify_modules.pl
+++ /dev/null
@@ -1,102 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use common;
-use modules;
-
-my $all = $ARGV[0] eq '-a';
-
-my %modules = map {
-    chomp;
-    my @l = split "\t";
-    my $mod = $l[-2];
-    $mod =~ s/"(.*)"/$1/;
-    if_(!/^\s*#/ && $mod !~ /:/ && $mod ne 'unknown', $mod => $l[-1])
-} map { cat_("/usr/share/ldetect-lst/$_") } 'pcitable', 'usbtable';
-
-my %l;
-my $kernel = $all ? '/lib/modules' : '../../kernel';
-foreach (`find $kernel -name "*.o" -o -name "*.o.gz"`) {
-    s|.*/lib/modules/.*?/||;
-    s|kernel/drivers/||;
-    m|(.*)/(.*)\.o(\.gz)?$|;
-    $l{$2} = $1;
-}
-
-foreach (keys %modules) {
-    my $ktype = $l{$_};
-    my $dtype = $modules::drivers{$_};
-    if (!$ktype && !$dtype) {
-	print "unused module $_ (descr $modules{$_}) (not in modules.pm nor in the kernel)\n";
-    } elsif (!$dtype) {
-	$missing{$_} = $ktype;
-    } elsif (!$ktype) {
-	$unused{$_} = $dtype->{type} 
-	  if !member($dtype->{type}, 'sound');
-    }
-}
-
-foreach (sort keys %missing) {
-    print "missing $_ in modules.pm (type $missing{$_}, descr $modules{$_})\n";
-}
-foreach (sort keys %unused) {
-    print "unused module $_ (type $unused{$_}) (not in the kernel)\n";
-}
-
-__END__
-my %m = %l;
-my (%missing, %missing2);
-while (my ($k, $v) = each %pci_probing::pcitable::ids) {
-    next if $v->[1] =~ /^(unknown$|ignore$|Card:|Server:|Bad:)/;
-
-    $l{$v->[1]} or $missing{$v->[1]} = 1;
-    $modules::drivers{$v->[1]} or push @{$missing2{$v->[1]}}, $v->[0];
-    delete $m{$v->[1]};
-}
-print "W: unused entry in modules.pm $_\n" 
-  foreach grep { !$l{$_} && !$missing{$_} #- will be reported below
-	     } keys %modules::drivers;
-
-print qq|W: missing entry in modules.pm for $l{$_} "$_"\n| foreach grep { !$modules::drivers{$_} } keys %l;
-
-my %known; @known{qw(net scsi misc)} = ();
-if ($ARGV[0] eq "-v") {
-    print "W: has no pci entry: $_ \n" foreach grep { exists $known{$m{$_}} } keys %m;
-}
-
-print "E: missing module $_\n" 
-  foreach grep { $modules::drivers{$_}{type} ne "sound" #- don't care about sound modules
-	     } keys %missing;
-
-foreach (keys %missing2) {
-    print qq|E: missing entry in modules.pm for $l{$_} "$_"|;
-    print qq| => "|, join("<>", @{$missing2{$_}}), '"';
-    print "\n";
-}
-
-#exit;
-
-my %devices_c = (
-  net => "checkEthernetDev, DRIVER_NET, DRIVER_MINOR_ETHERNET",
-  scsi => "checkSCSIDev, DRIVER_SCSI, DRIVER_MINOR_NONE",
-  disk => "checkSCSIDev, DRIVER_SCSI, DRIVER_MINOR_NONE",
-  pcmcia => "NULL, DRIVER_PCMCIA, DRIVER_MINOR_NONE",
-  paride => "NULL, DRIVER_PARIDE, DRIVER_MINOR_NONE",
-  cdrom => "NULL, DRIVER_CDROM, DRIVER_MINOR_NONE",
-);
-my $devices_c = join "|", keys %devices_c;
-
-my %drivers = %modules::drivers;
-$drivers{$_}{type} =~ /$devices_c/ or delete $drivers{$_} foreach keys %drivers;
-foreach (cat_("../../install/devices.c")) {
-    if (/static struct driver drivers/ .. /^};/) {
-	/\s*{\s*"[^"]*"\s*,\s*"(.*)"/ or next;
-	delete $drivers{$1} or print qq|W: unused entry in devices.c $1\n|;
-    }
-}
-foreach (sort { $drivers{$a}{type} cmp $drivers{$b}{type} } keys %drivers) {
-    my ($m, $v) = ($_, $drivers{$_});
-    /^(8390|sunrpc|lockd|dummy|st)$/ and next;
-
-    print qq|E: missing entry in devices.c { "$v->{text}", "$m", 0, $devices_c{$v->{type}} }\n|;
-}
diff --git a/perl-install/standalone.pm b/perl-install/standalone.pm
deleted file mode 100644
index 40405c156..000000000
--- a/perl-install/standalone.pm
+++ /dev/null
@@ -1,186 +0,0 @@
-package standalone; # $Id$
-
-use c;
-
-$::isStandalone = 1;
-
-$ENV{SHARE_PATH} ||= "/usr/share";
-
-c::setlocale();
-c::bindtextdomain('libDrakX', "/usr/share/locale");
-
-
-
-################################################################################
-package pkgs_interactive;
-
-sub interactive::do_pkgs {
-    my ($in) = @_;
-    bless { in => $in }, 'pkgs_interactive';
-}
-
-sub install {
-    my ($o, @l) = @_;
-    $o->{in}->suspend;
-    my $wait = $o->{in}->wait_message('', _("Installing packages..."));
-    standalone::explanations("installed packages @l");
-    my $ret = system('urpmi', '--allow-medium-change', '--auto', '--best-output', @l) == 0;
-    undef $wait;
-    $o->{in}->resume;
-    $ret;
-}
-
-sub is_installed {
-    my ($o, @l) = @_;
-    system('rpm', '-q', @l) == 0;
-}
-
-sub remove {
-    my ($o, @l) = @_;
-    $o->{in}->suspend;
-    standalone::explanations("removed packages @l");
-    my $ret = system('rpm', '-e', @l) == 0;
-    $o->{in}->resume;
-    $ret;
-}
-
-sub remove_nodeps {
-    my ($o, @l) = @_;
-    $o->{in}->suspend;
-    standalone::explanations("removed (with --nodeps) packages @l");
-    my $ret = system('rpm', '-e', '--nodeps', @l) == 0;
-    $o->{in}->resume;
-    $ret;
-}
-################################################################################
-
-
-package standalone;
-
-#- stuff will go to special /var/log/explanations file
-my $standalone_name;
-sub explanations { c::syslog(c::LOG_INFO()|c::LOG_LOCAL1(), "@_") }
-
-@common_functs = qw(renamef linkf symlinkf output substInFile mkdir_p rm_rf cp_af touch setVarsInSh setVarsInCsh update_gnomekderc);
-@builtin_functs = qw(chmod chown unlink link symlink rename system);
-@drakx_modules = qw(Xconfig Xconfigurator Xconfigurator_consts any bootloader bootlook c class_discard commands crypto detect_devices devices diskdrake diskdrake::hd_gtk diskdrake::interactive diskdrake::removable diskdrake::removable_gtk diskdrake::smbnfs_gtk fs fsedit http keyboard lang log loopback lvm modparm modules mouse my_gtk network network::adsl network::ethernet network::isdn_consts network::isdn network::modem network::netconnect network::network network::nfs network::smb network::tools partition_table partition_table_bsd partition_table_dos partition_table_empty partition_table_gpt partition_table_mac partition_table_raw partition_table_sun printer printerdrake proxy raid run_program scanner services steps swap timezone tinyfirewall);
-
-
-sub import {
-    ($standalone_name = $0) =~ s|.*/||;
-    c::openlog("$standalone_name"."[$$]");
-    explanations('### Program is starting ###');
-
-    eval "*MDK::Common::$_ = *$_" foreach @common_functs;
-
-    foreach my $f (@builtin_functs) {
-	eval "*$_"."::$f = *$f" foreach @drakx_modules;
-	eval "*".caller()."::$f = *$f";
-    }
-}
-
-
-sub renamef {
-    explanations "moved file $_[0] to $_[1]";
-    goto &MDK::Common::File::renamef;
-}
-
-sub linkf {
-    explanations "hard linked file $_[0] to $_[1]";
-    goto &MDK::Common::File::linkf;
-}
-
-sub symlinkf {
-    explanations "symlinked file $_[0] to $_[1]";
-    goto &MDK::Common::File::symlinkf;
-}
-
-sub output {
-    explanations "created file $_[0]";
-    goto &MDK::Common::File::output;
-}
-
-sub substInFile(&@) {
-    explanations "modified file $_[1]";
-    goto &MDK::Common::File::substInFile;
-}
-
-sub mkdir_p {
-    explanations "created directory $_[0] (and parents if necessary)";
-    goto &MDK::Common::File::mkdir_p;
-}
-
-sub rm_rf {
-    explanations "removed files/directories (recursively) @_";
-    goto &MDK::Common::File::rm_rf;
-}
-
-sub cp_af {
-    my $retval = MDK::Common::File::cp_af @_;
-    my $dest = pop @_;
-    explanations "copied recursively @_ to $dest";
-    return $retval;
-}
-
-sub touch {
-    explanations "touched file @_";
-    goto &MDK::Common::File::touch;
-}
-
-sub setVarsInSh {
-    explanations "modified file $_[0]";
-    goto &MDK::Common::System::setVarsInSh;
-}
-
-sub setVarsInCsh {
-    explanations "modified file $_[0]";
-    goto &MDK::Common::System::setVarsInCsh;
-}
-
-sub update_gnomekderc {
-    explanations "modified file $_[0]";
-    goto &MDK::Common::System::update_gnomekderc;
-}
-
-
-sub chmod {
-    my $retval = CORE::chmod @_;
-    my $mode = shift @_;
-    explanations sprintf("changed mode of %s to %o", $_, $mode) foreach @_;
-    return $retval;
-}
-
-sub chown {
-    my $retval = CORE::chown @_;
-    my $uid = shift @_;
-    my $gid = shift @_;
-    explanations sprintf("changed owner of $_ to $uid.$gid") foreach @_;
-    return $retval;
-}
-
-sub unlink {
-    explanations "removed files/directories @_";
-    CORE::unlink @_;
-}
-
-sub link {
-    explanations "hard linked file $_[0] to $_[1]";
-    CORE::link $_[0], $_[1];
-}
-
-sub symlink {
-    explanations "symlinked file $_[0] to $_[1]";
-    CORE::symlink $_[0], $_[1];
-}
-
-sub rename {
-    explanations "renamed file $_[0] to $_[1]";
-    CORE::rename $_[0], $_[1];
-}
-
-sub system {
-    explanations "launched command: @_";
-    CORE::system @_;
-}
-
-1;
diff --git a/perl-install/standalone/XFdrake b/perl-install/standalone/XFdrake
deleted file mode 100755
index e432b9681..000000000
--- a/perl-install/standalone/XFdrake
+++ /dev/null
@@ -1,110 +0,0 @@
-#!/usr/bin/perl
-
-# XFdrake
-# Copyright (C) 1999 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use modules;
-use Xconfigurator;
-use Xconfig;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: XFdrake [--xf3] [--beginner] [--expert] [--auto] [--noauto] [--skiptest] [--testing]\n";
-
-my $i = {};
-
-$::force_xf3 = /-xf3/;
-$::beginner = /-beginner/;
-$::expert = /-expert/;
-$::auto = /-auto/;
-$::noauto = /-noauto/;
-$::testing = /-testing/;
-$i->{skiptest} = /-skiptest/;
-
-my $in = 'interactive'->vnew('su', 'X');
-
--r '/etc/modules.conf' and modules::mergein_conf('/etc/modules.conf');
-
-my $f = "/usr/X11R6/lib/X11/rgb.txt"; #- this one is on all platform (instead of Cards ?)
-$in->do_pkgs->install('XFree86', 'XFree86-75dpi-fonts') if !-e $f;
--e $f or die "install XFree86 first!\n";
-
-`pidof xfs` > 0 or system("/etc/rc.d/init.d/xfs start") if !$i->{skiptest};
-
-system("mount /proc 2>/dev/null"); # ensure /proc is mounted for pci probing
-
-begin:
-Xconfig::getinfo($i);
-Xconfig::getinfoFromXF86Config($i); #- take default from here at least.
-
-my $allowNVIDIA_rpms;
-my (%list, %select);
-#- local *F;
-#- open F, "/var/lib/urpmi/depslist.ordered";
-#- while (<F>) {
-#-     /(.*NVIDIA.*)-([^-]*)-([^-]*)\s+/ and $list{$1} = 1;
-#- }
-#- close F;
-#-   now replaced by the following code using directly urpm library.
-eval {
-    require urpm;
-    my $urpm = new urpm;
-    $urpm->read_config(nocheck_access => 1);
-    foreach (grep { !$_->{ignore} } @{$urpm->{media} || []}) {
-	$urpm->parse_synthesis($_);
-    }
-    foreach (@{$urpm->{params}{depslist} || []}) {
-	$_->{name} =~ /NVIDIA/ and $list->{$_->{name}} = 1;
-    }
-};
-if ($list{NVIDIA_GLX}) {
-    eval {
-	my ($version, $release, $ext) = `uname -r` =~ /([^-]*)-([^-]*mdk)(\S*)/;
-	$ext and $ext = "-$ext";
-	$list{"NVIDIA_kernel-$version-$release$ext"} or die "no NVIDIA kernel for current kernel";
-	$select{"NVIDIA_kernel-$version-$release$ext"} = 1;
-	foreach (`rpm -qa kernel-2* kernel-smp-2* kernel-enterprise-2* kernel-secure-2* kernel kernel-smp kernel-entreprise kernel22 kernel22-smp kernel22-secure`) {
-	    ($ext, $version, $release) = /kernel[^-]*(-\D[^-]*)-([^-]*)-([^-]*mdk)?/;
-	    $release or ($version, $release) = $version =~ /(.*?)\.(\d+mdk)/;
-	    $list{"NVIDIA_kernel-$version-$release$ext"} and $select{"NVIDIA_kernel-$version-$release$ext"} = 1;
-	}
-	$allowNVIDIA_rpms = [ keys(%select), "NVIDIA_GLX" ];
-    }
-}
-if (!$allowNVIDIA_rpms) {
-    my ($uname_r) = `uname -r` =~ /(\S+)/;
-    $allowNVIDIA_rpms = ((-e "/lib/modules/$uname_r/kernel/drivers/char/NVdriver.o.gz" ||
-			  -e "/lib/modules/$uname_r/kernel/drivers/char/NVdriver.o") &&
-			 -e "/usr/X11R6/lib/modules/drivers/nvidia_drv.o" &&
-			 -e "/usr/X11R6/lib/modules/extensions/libglx.so") && []; #- empty list but true.
-}
-
-$::isEmbedded and kill USR2, $::CCPID;
-Xconfigurator::main('', $i, $in, $in->do_pkgs, 
-		    { allowFB          => $::expert,
-		      allowNVIDIA_rpms => $allowNVIDIA_rpms });
-!$::isEmbedded and $in->exit(0);
-kill USR1, $::CCPID;
-goto begin;
diff --git a/perl-install/standalone/adduserdrake b/perl-install/standalone/adduserdrake
deleted file mode 100755
index c176f5936..000000000
--- a/perl-install/standalone/adduserdrake
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use interactive;
-use any;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: adduserdrake [--beginner] [--expert] [<users...>]\n";
-
-$::beginner = /-beginner/;
-$::expert = /-expert/;
-
-my @etc_pass_fields = qw(name pw uid gid realname home shell);
-my @shells = grep { -x $_ } map { "/bin/$_" } qw(bash tcsh zsh ash ksh);
-my $isMD5 = cat_("/etc/pam.d/passwd") =~ /md5/;
-my $isShadow = cat_("/etc/pam.d/passwd") =~ /shadow/;
-
-
-my $users = []; 
-my $in;
-
-if (my @l = grep { ! /^-/ } @ARGV) {
-    $users = [ map { { name => $_, realname => $_ } } @l ];
-} else {
-    $in = 'interactive'->vnew('su', 'user');
-    any::ask_users('', $in, $users, $ENV{SECURE_LEVEL});
-}
-
-system("adduser", $_->{name}) foreach @$users;
-any::addUsers('', $users);
-
-any::write_passwd_user('', $_, $isMD5) foreach @$users;
-system("pwconv") if $isShadow;
-
-#$in->do_pkgs->install("autologin") if $o->{autologin};
-#any::set_autologin('', $o->{autologin}, $o->{desktop});
-
-$in->exit(0) if $in;
diff --git a/perl-install/standalone/diskdrake b/perl-install/standalone/diskdrake
deleted file mode 100755
index 69b84b0dc..000000000
--- a/perl-install/standalone/diskdrake
+++ /dev/null
@@ -1,120 +0,0 @@
-#!/usr/bin/perl
-
-# DiskDrake
-# Copyright (C) 1999 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# DiskDrake uses resize_fat which is a perl rewrite of the work of Andrew
-# Clausen (libresize).
-# DiskDrake is also based upon the libfdisk and the install from Red Hat Software
-
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use diskdrake::interactive;
-use interactive;
-use detect_devices;
-use fsedit;
-use fs;
-use log;
-use c;
-
-
-my %options;
-my @l = @ARGV;
-while (my $e = shift @l) {
-    my ($option) = $e =~ /--?(.*)/ or next;
-    if ($option eq 'embedded') {
-	$::isEmbedded = 1;
-	($::XID, $::CCPID, @l) = @l;
-    } elsif ($option =~ /(.*?)=(.*)/) {
-	$options{$1} = $2;
-    } else {
-	$options{$option} = '';
-    }
-}
-$::expert = defined(delete $options{expert});
-$::testing = defined(delete $options{testing});
-
-my @types = qw(hd nfs smb removable fileshare);
-my ($type, $para) = ('hd', '');
-foreach (@types) {
-    if (exists $options{$_}) {
-        $para = delete $options{$_};
-	$type = $_;
-	last;
-    }
-}
-%options and die "usage: diskdrake [--expert] [--testing] [--{" . join(",", @types) . "}]\n";
-
-if ($>) {
-    $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-}
-
-
-my $in = 'interactive'->vnew('su');
-
-if ($type eq 'fileshare') {
-    any::fileshare_config($in);
-    $in->exit(0);
-}
-
-my $all_hds = do {
-    if ($type eq 'hd') {
-	catch_cdie { fsedit::hds([ detect_devices::hds() ], {}) }
-	  sub {
-	      my $err = formatError($@);
-	      if ($err =~ s/ask_before_blanking://) {
-		  $in->ask_okcancel(_("Error"),
-[_("I can't read your partition table, it's too corrupted for me :(
-I'll try to go on blanking bad partitions"), $err]);
-              } else {
-	          $in->ask_warn('', $err);
-		  1;
-	      }
-	  };
-    } else { fsedit::empty_all_hds() }
-};
-
-$SIG{__DIE__} = sub { my $m = chomp_($_[0]); log::l("ERROR: $m") };
-my $fstab = [ fsedit::get_all_fstab($all_hds) ];
-
-fs::get_raw_hds('', $all_hds);
-
-fs::merge_info_from_fstab([ fsedit::get_really_all_fstab($all_hds) ]);
-fs::merge_info_from_mtab([ fsedit::get_really_all_fstab($all_hds) ]);
-
-$all_hds->{current_fstab} = fs::fstab_to_string($all_hds);
-
-if ($type eq 'hd') {
-    diskdrake::interactive::main($in, $all_hds);
-} elsif ($type eq 'removable') {
-    require diskdrake::removable;
-    $para =~ s|^/dev/||;
-    my ($raw_hd) = $para ?
-      first(grep { $para eq $_->{device} } @{$all_hds->{raw_hds}}) || die "unknown removable $para\n" :
-      $in->ask_from_listf('', '', \&diskdrake::interactive::format_raw_hd_info, $all_hds->{raw_hds}) or $in->exit(0);
-    diskdrake::removable::main($in, $all_hds, $raw_hd);
-} else {
-    $in->ask_warn('', "Sorry only a gtk frontend is available") if !$in->isa('interactive_gtk');
-    require diskdrake::smbnfs_gtk;
-    diskdrake::smbnfs_gtk::main($in, $all_hds, $type);
-}
-
-$in->exit(0);
diff --git a/perl-install/standalone/drakTermServ b/perl-install/standalone/drakTermServ
deleted file mode 100755
index 82b75c580..000000000
--- a/perl-install/standalone/drakTermServ
+++ /dev/null
@@ -1,1288 +0,0 @@
-#!/usr/bin/perl 
-#
-# Copyright (C) 2001 by MandrakeSoft (sbenedict@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# first pass at an interactive tool to help setup/maintain the Mandrake 
-# Terminal Server implementation
-#
-#	Requires: etherboot, mkinitrd-net, terminal-server, dhcpd-server
-#			clusternfs, tftpserver
-#
-#	Tasks:
-#		1) creation/management of boot images (kernel+initrd, etherboot enabled)
-#			mkinitrd-net is the command line interface for this
-#		2) create/modify /etc/dhcpd.conf for diskless clients
-#		3) create/modify /etc/exports for clusternfs export of "/"
-#		4) add/remove entries in /etc/shadow$$CLIENTS$$ to allow user access
-#		5) per client XF86Config-4, using /etc/XF86Config-4$$IP-ADDRESS$$
-#		6) other per client customizations (modules.conf, keyboard, mouse)
-#		7) enable/modify /etc/xinetd.d/tftp for etherboot
-#		8) create etherboot floppies for client machines
-#
-#	Thanks to the fine work of the folks involved in ltsp.org, and 
-#	Michael Brown <mbrown@fensystems.co.uk>
-#
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX );
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use my_gtk qw(:helpers :wrappers);
-use common;
-use run_program;
-
-#use strict;
-use Config;
-use POSIX;
-
-#turn off su for now - just testing - need to run as root or sudo
-my $in = 'interactive'->vnew('su');
-
-my @buff;	#- used o display status info
-
-my $central_widget;
-my $window1;
-my $windows;
-my $status_box;
-my $main_box;
-
-my $nfs_subnet;
-my $nfs_mask;
-
-my $in = 'interactive'->vnew;
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\S*) (\S*)/;
-
-if ("@ARGV" =~ /--help|-h/) {
-    print q(Mandrake Terminal Server Configurator
---enable         : enable MTS
---disable        : disable MTS
---start          : start MTS
---stop           : stop MTS
---adduser        : add an existing system user to MTS (requires username)
---deluser        : delete an existing system user from MTS (requires username)
---addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)
---delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)
-);
-    exit(0);
-}
-
-if ("@ARGV" =~ /--enable/) {
-	my $cmd_line = 1;
-	enable_ts($cmd_line);
-	exit(0);	
-}
-
-if ("@ARGV" =~ /--disable/) {
-	my $cmd_line = 1;
-	disable_ts($cmd_line);
-	exit(0);	
-}
-
-if ("@ARGV" =~ /--start/) {
-	my $cmd_line = 1;
-	start_ts($cmd_line);
-	exit(0);	
-}
-
-if ("@ARGV" =~ /--stop/) {
-	my $cmd_line = 1;
-	stop_ts($cmd_line);
-	exit(0);	
-}
-
-if ("@ARGV" =~ /--adduser/) {
-	die "$0 $ARGV[0] requires a username...\n" if $#ARGV<1;
-	my $cmd_line = 1;
-	adduser($cmd_line, $ARGV[1]);
-	exit(0);	
-}
-
-if ("@ARGV" =~ /--deluser/) {
-	die "$0 $ARGV[0] requires a username...\n" if $#ARGV<1;
-	my $cmd_line = 1;
-	deluser($cmd_line, $ARGV[1]);
-	exit(0);	
-}
-
-if ("@ARGV" =~ /--addclient/) {
-	die "$0 $ARGV[0] requires hostname, MAC address, IP, nbi-image...\n" if $#ARGV<4;
-	my $cmd_line = 1;
-	addclient($cmd_line, $ARGV[1], $ARGV[2], $ARGV[3], $ARGV[4]);
-	exit(0);	
-}
-
-if ("@ARGV" =~ /--delclient/) {
-	die "$0 $ARGV[0] requires hostname...\n" if $#ARGV<1;
-	my $cmd_line = 1;
-	delclient($cmd_line, $ARGV[1], $ARGV[2], $ARGV[3]);
-	exit(0);	
-}
-	
-interactive_mode() if $#ARGV<1;
-
-sub cursor_wait {
-	# turn the cursor to a watch
-	$window1->window->set_cursor( new Gtk::Gdk::Cursor( 150 ) );	
-	Gtk->main_iteration while Gtk->events_pending;
-}
-
-sub cursor_norm {
-	# restore normal cursor
-	$window1->window->set_cursor( new Gtk::Gdk::Cursor( 68 ) );
-	Gtk->main_iteration while Gtk->events_pending;
-}
-
-sub display_error {
-    my ($message) = @_;
-    my $label;
-    my $error_box;
-    ${$central_widget}->destroy();
-    gtkpack($status_box,
-	    $error_box = gtkpack_(new Gtk::VBox(0,0),
-		  1, new Gtk::Label($message),
-				  0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					    gtksignal_connect(new Gtk::Button(_("OK")), clicked => 
-							      sub { ${$central_widget}->destroy(); create_fontsel() }),
-					    ),
-				  )
-	    );
-    $central_widget = \$error_box;
-}
-
-sub interactive_mode {
-    my $font_sel;
-#    $interactive = 1;
-    init Gtk;
-    $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-    $window1->signal_connect (delete_event => sub { Gtk->exit(0) });
-    $window1->set_position(1);
-    $window1->set_title(_("Mandrake Terminal Server Configuration"));
-    $window1->set_border_width(5);
-    my ($pix_user_map, $pix_user_mask) = gtkcreate_png("ic82-network-40");    
-    my ($pix_u_map, $pix_u_mask) = gtkcreate_png("drakTS.620x57");
-
-    gtkadd($window1,
-	   gtkpack_(new Gtk::VBox(0,2),
-		    if_(!$::isEmbedded, 0,  new Gtk::Pixmap($pix_u_map, $pix_u_mask)),
-		    1, gtkpack_(new Gtk::HBox(0,2),
-			     1, gtkpack_(new Gtk::VBox(0,2),
-					1, gtkpack ($status_box = new Gtk::VBox(0,5),
-						$main_box = new Gtk::VBox(0,10),
-					),
-					1, gtkpack_(new Gtk::HBox(0,2),
-						     0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-							       gtksignal_connect(new Gtk::Button(_("Enable Server")), clicked 	=>
-									 sub { ${$central_widget}->destroy(); 
-									 	$windows = 1;
-									 	cursor_wait(); 
-									 	enable_ts();
-									 	cursor_norm();
-									 }),
-							       gtksignal_connect(new Gtk::Button(_("Disable Server")), clicked => 
-									 sub { ${$central_widget}->destroy(); 
-									 	cursor_wait();
-									 	disable_ts();
-									 	cursor_norm(); 
-									 }),
-							      ),
-						     0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-							       gtksignal_connect(new Gtk::Button(_("Start Server")), clicked =>
-								sub {  ${$central_widget}->destroy(); 
-									$windows = 0; 
-									cursor_wait();	
-									start_ts();
-									cursor_norm();
-								}),
-							       gtksignal_connect(new Gtk::Button(_("Stop Server")), clicked 	=>
-								 sub { ${$central_widget}->destroy(); 
-								 	cursor_wait();
-								 	stop_ts();
-								 	cursor_norm();
-								 }),
-							      ),
-							 0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-							       gtksignal_connect(new Gtk::Button(_("Etherboot Floppy/ISO")), clicked 	=>
-									 sub { ${$central_widget}->destroy(); $windows = 1; make_boot();}),
-							       gtksignal_connect(new Gtk::Button(_("Net Boot Images")), clicked => 
-									 sub { ${$central_widget}->destroy(); make_nbi() }),
-							      ),
-						     0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-							       gtksignal_connect(new Gtk::Button(_("Add/Del Users")), clicked =>
-								 sub {  ${$central_widget}->destroy(); $windows = 0; maintain_users();}),
-							       gtksignal_connect(new Gtk::Button(_("Add/Del Clients")), clicked 	=>
-								 sub { ${$central_widget}->destroy(); maintain_clients()}),
-							      ),     
-						     1, new Gtk::HBox(0,2),
-						     0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-							       gtksignal_connect(new Gtk::Button(_("Help")),clicked =>
-										 sub { ${$central_widget}->destroy(); help() }),
-							       gtksignal_connect(new Gtk::Button(_("Close")), clicked => sub {
-										     $::isEmbedded and kill USR1, $::CCPID;
-										     Gtk->main_quit() }),
-							      ),
-						    ),
-					),
-			     ),
-		    ),
-	   );
-    $central_widget = \$main_box;
-    $window1->show_all;
-    $window1->realize;
-    $window1->show_all();    
-
-    Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill USR2, $::CCPID;
-    Gtk->main;
-    Gtk->exit(0);
-}
-
-sub about {
-    my $text = new Gtk::Text(undef, undef);
-    my $about_box;
-    gtkpack($status_box,
-	    $about_box = gtkpack_(new Gtk::VBox(0,10),
-	       1, gtkpack_(new Gtk::HBox(0,0),
-			   1, gtktext_insert(gtkset_editable($text, 1), "
- Copyright (C) 2002 by MandrakeSoft 
-	Stew Benedict sbenedict\@mandrakesoft.com
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- Thanks:
-	- LTSP Project http://www.ltsp.org
-	- Michael Brown <mbrown\@fensystems.co.uk>
-
-"),
-			   0, new Gtk::VScrollbar($text->vadj),
-			   ),
-				  0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					    gtksignal_connect(new Gtk::Button(_("OK")), clicked => 
-							      sub { ${$central_widget}->destroy(); create_fontsel() }),
-					    ),
-				  )
-	    );
-    $central_widget = \$about_box;
-    $status_box->show_all();
-}
-
-sub help {
-    my $text = new Gtk::Text(undef, undef);
-    my $help_box;
-    gtkpack($status_box,
-	    $help_box = gtkpack_(new Gtk::VBox(0,10),
-	       1, gtkpack_(new Gtk::HBox(0,0),
-			   1, gtktext_insert(gtkset_editable($text, 1), "drakTermServ Overview
-			   
-        - Create Etherboot Enabled Boot Images:
-        		To boot a kernel via etherboot, a special kernel/initrdrd image must be created.
-        		mkinitrd-net does much of this work and drakTermServ is just a graphical interface
-        		to help manage/customize these images.
-
-        - Maintain /etc/dhcpd.conf:
-        		To net boot clients, each client needs a dhcpd.conf entry, assigning an IP address
-        		and net boot images to the machine. drakTermServ helps create/remove these entries.
-
-        		A typical dhcpd.conf stanza to support a diskless client looks like:
-        		
-				host curly {
-					hardware ethernet        00:20:af:2f:f7:9d;
-					fixed-address              192.168.192.3;
-					filename                      \"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";
-				}
-			
-			While you can use a pool of IP addresses, rather than setup a specific entry for
-			a client machine, using a fixed address scheme facilitates using the functionality
-			of client-specific configuration files that ClusterNFS provides.
-			
-			Note: You must stop/start the server after adding or changing clients/
-			
-        - Maintain /etc/exports:
-        		Clusternfs allows export of the root filesystem to diskless clients. drakTermServ
-        		sets up the correct entry to allow anonymous access to the root filesystem from
-        		diskless clients.
-
-        		A typical exports entry for clusternfs is:
-        		
-        		/                  (ro,all_squash)
-        		
-        - Maintain /etc/shadow\$\$CLIENT\$\$:
-        		For users to be able to log into the system from a diskless client, their entry in
-        		/etc/shadow needs to be duplicated in /etc/shadow\$\$CLIENTS\$\$. drakTermServ helps
-        		in this respect by adding or removing system users from this file.
-
-        - Per client /etc/X11XF86Config-4\$\$IP-ADDRESS\$\$:
-        		Through clusternfs, each diskless client can have it's own unique configuration files
-        		on the root filesystem of the server. In the future drakTermServ will help create these
-        		files.
-
-        - Per client system configuration files:
-        		Through clusternfs, each diskless client cand have it's own unique configuration files
-        		on the root filesystem of the server. In the future, drakTermServ can help create files
-        		such as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/keyboard on a per-client
-        		basis.
-
-        - /etc/xinetd.d/tftp:
-        		drakTermServ will configure this file to work in conjunction with the images created by
-        		mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each
-        		diskless client.
-
-        		A typical tftp configuration file looks like:
-        		
-        		service tftp
-        		(
-                        disable         = no
-                        socket_type  = dgram
-                        protocol        = udp
-                        wait             = yes
-                        user             = root
-                        server          = /usr/sbin/in.tftpd
-                        server_args  = -s /var/lib/tftpboot
-        		}
-        		
-        		The changes here from the default installation are changing the disable flag to
-        		'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net
-        		puts it's images.
-
-        - Create etherboot floppies/CDs:
-        		The diskless client machines need either ROM images on the NIC, or a boot floppy
-        		or CD to initate the boot sequence.  drakTermServ will help generate these images,
-        		based on the NIC in the client machine.
-        		
-        		A basic example of creating a boot floppy for a 3Com 3c509 manually:
-        		
-        		cat /usr/lib/etherboot/boot1a.bin /\
-        			/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0
- 
-
-"),
-			   0, new Gtk::VScrollbar($text->vadj),
-			   ),
-				 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					   gtksignal_connect(new Gtk::Button(_("OK")), clicked => 
-							     sub { ${$central_widget}->destroy(); }),
-					   ),
-				 )
-	    );
-    $central_widget = \$help_box;
-    $status_box->show_all();
-}
-
-sub make_boot {
-	#- make a boot image on floppy or iso from etherboot images
-	my $boot_box;
-	my $rom_path = "/usr/lib/etherboot";
-	my @nics = all("/usr/lib/etherboot/lzrom");
-	my $list_nics = new Gtk::List();
-	my $nic;
-	
-	foreach (@nics) {
-		my $t = $_;
-		$list_nics->add(gtkshow(gtksignal_connect(new Gtk::ListItem($t), 
-		select => sub { $nic = $t; })));
-	}
-	$list_nics->set_selection_mode('single');
-    
-	gtkpack($status_box,
-		$boot_box = gtkpack_(new Gtk::VBox(0,10),
-			0, gtkadd(new Gtk::HBox(0,10),
-				new Gtk::HBox(0,5),
-				createScrolledWindow($list_nics),
-				gtkadd(new Gtk::VBox(1,10),
-					new Gtk::HBox(0,20),
-					gtksignal_connect(new Gtk::Button(_("Boot Floppy")), clicked => 
-						sub {write_eb_image($nic, $rom_path, "floppy"); }),
-					gtksignal_connect(new Gtk::Button(_("Boot ISO")), clicked => 
-						sub {write_eb_image($nic, $rom_path, "iso"); }),
-					new Gtk::HBox(0,20),
-				),
-				new Gtk::HBox(0,5),
-			),
-		),
-	);
-	
-	$central_widget = \$boot_box;
-	$boot_box->show_all();
-}
-
-sub make_nbi {
-	my $nbi_box;
-	my @kernels = grep(/vmlinuz/, all("/boot"));
-	my $kernel;
-	my $nic;
-	
-	#- just a static list for the moment
-	#- method in mknbi-net is much better
-	my @nics = ("3c509", "3c59x", "3c90x", "8139cp", "8139too", "acenic", "airo",
-		"aironet4500_card","bcm5700", "dgrs", "dl2k", "dmfe", "e100",
-		"e1000", "eepro100", "epic100", "fealnx", "hamachi", "hp100",
-		"hysdn", "natsemi", "natsemi_old", "ne", "ne2k-pci", "ns83820",
-		"pcnet32", "prism2_pci", "prism2_plx", "rcpci", "sis900",
-		"starfire", "sundance", "sungem", "sunhme", "tlan", "tulip-old",
-		"via-rhine", "winbond-840", "xircom_cb", "xircom_tulip_cb", "yellowfin");
-	
-	#- kernel/module info in tree view
-	my $tree_kernels = new Gtk::Tree();
-	
-	foreach (@kernels){
-		my $t = $_;
-		my $t_kernel= new_with_label Gtk::TreeItem($t);
-		gtksignal_connect($t_kernel, select => sub { $kernel = $t;
-								$nic = ''; });
-		$tree_kernels->append($t_kernel);
-		
-		my $k_detail = new Gtk::Tree();
-		$t_kernel->set_subtree($k_detail);
-		
-		foreach (@nics) {
-			my $m = $_;
-			my $k_det_nic = new_with_label Gtk::TreeItem($m);
-			gtksignal_connect($k_det_nic, select => sub { $nic = $m;
-								$kernel = $t; });
-			$k_detail->append($k_det_nic);
-			$k_det_nic->show();
-		}		
-	}	
-
-	# existing nbi images in list
-	my $list_nbis = new Gtk::List();
-	my @nbis = grep(/\.nbi/, all("/var/lib/tftpboot"));
-	my $nbi;
-	
-	foreach (@nbis) {
-		my $t = $_;
-		$list_nbis->add(gtkshow(gtksignal_connect(new Gtk::ListItem($t), 
-				select => sub { $nbi = $t; })));
-	}
-	$list_nbis->set_selection_mode('single');		
-				
-	gtkpack($status_box,
-		$nbi_box = gtkpack_(new Gtk::VBox(1,10),
-			0, gtkadd(new Gtk::HBox(0,10),
-				createScrolledWindow($tree_kernels),
-				gtkadd(new Gtk::VBox(1,10),
-					gtksignal_connect(new Gtk::Button(_("Build Whole Kernel -->")), clicked => 
-						sub { if ($kernel) { 
-								$in->ask_warn('',_("This will take a few minutes."));
-								cursor_wait();
-								system("/usr/bin/mknbi-set -k /boot/$kernel");
-								$list_nbis->clear_items();
-								@nbis = grep(/\.nbi/, all("/var/lib/tftpboot"));
-								foreach (@nbis) {
-									my $t = $_;
-									$list_nbis->add(gtkshow(gtksignal_connect(new Gtk::ListItem($t), 
-									select => sub { $nbi = $t; })));
-								}
-								cursor_norm(); 
-							} else {
-								$in->ask_warn('',_("No kernel selected!")) if !($kernel); 
-							}
-						}),
-					gtksignal_connect(new Gtk::Button(_("Build Single NIC -->")), clicked => 
-						sub { if ($nic) {
-								system("/usr/bin/mknbi-set -k /boot/$kernel -r $nic");
-								$list_nbis->clear_items();
-								@nbis = grep(/\.nbi/, all("/var/lib/tftpboot"));
-								foreach (@nbis) {
-									my $t = $_;
-									$list_nbis->add(gtkshow(gtksignal_connect(new Gtk::ListItem($t), 
-									select => sub { $nbi = $t; })));
-								} 
-							} else {
-								$in->ask_warn('',_("No nic selected!"));
-							}
-						}),
-					gtksignal_connect(new Gtk::Button(_("Build All Kernels -->")), clicked => 
-						sub { $in->ask_warn('',_("This will take a few minutes."));
-							cursor_wait();
-							system("/usr/bin/mknbi-set");
-							$list_nbis->clear_items();
-							@nbis = grep(/\.nbi/, all("/var/lib/tftpboot"));
-							foreach (@nbis) {
-								my $t = $_;
-								$list_nbis->add(gtkshow(gtksignal_connect(new Gtk::ListItem($t), 
-								select => sub { $nbi = $t; })));
-							}
-							cursor_norm(); 
-						}),
-					new Gtk::HBox(1,1),
-					gtksignal_connect(new Gtk::Button(_("<-- Delete")), clicked => 
-						sub { my $nbi = "/var/lib/tftpboot/" . $nbi;
-							my $result = unlink("$nbi") || warn("Can't delete $nbi...");
-							if ($result eq 1) {
-								$list_nbis->remove_items($list_nbis->selection);
-							}
-						}),
-					gtksignal_connect(new Gtk::Button(_("Delete All NBIs")), clicked => 
-						sub { cursor_wait(); 
-							foreach (grep(/\.nbi/, all("/var/lib/tftpboot"))) {
-								my $nbi = "/var/lib/tftpboot/" . $_;
-								my $result = unlink("$nbi") || warn("Can't delete $nbi...");
-								#- wanted to walk through these and delete
-								#- but can't figure out how to get the item from
-								#- the label :(
-							}
-							$list_nbis->clear_items();
-							cursor_norm();
-						}),	
-					new Gtk::HBox(1,1),
-				),
-				createScrolledWindow($list_nbis),
-			),),
-	);
-	
-	$central_widget = \$nbi_box;
-	$nbi_box->show_all();
-}
-
-sub maintain_users {
-	#- copy users from /etc/shadow to /etc/shadow$$CLIENT$$ to allow ts login
-	my $user_box;
-	my @sys_users = cat_("/etc/shadow");
-	my @ts_users = cat_("/etc/shadow\$\$CLIENT\$\$");
-	
-	#- use /homes to filter system daemons
-	my @homes = all("/home");
-	
-	my $list_sys_users = new Gtk::List();
-	my $sys_user;
-	
-	foreach (@sys_users) {		
-		my ($s_label, $dummy) = split(/:/, $_, 2);
-		if (grep(/$s_label/, @homes)) {
-			$list_sys_users->add(gtkshow(gtksignal_connect(new Gtk::ListItem($s_label), 
-				select => sub { $sys_user = $s_label; })));
-		}
-	}
-	$list_sys_users->set_selection_mode('single');
-  
-	my $list_ts_users =  new Gtk::List();
-	my $ts_user;
-	
-	foreach (@ts_users) {
-		my ($t_label, $dummy) = split(/:/, $_, 2);
-		my @system_entry = grep(/$t_label/, @sys_users); 
-		$t_label = $t_label . " !!!" if ($_ ne $system_entry[0]);
-		$list_ts_users->add(gtkshow(gtksignal_connect(new Gtk::ListItem($t_label), 
-		select => sub { $ts_user = $t_label; })));
-	}
-	$list_ts_users->set_selection_mode('single');
-	
-	gtkpack($status_box,
-		$user_box = gtkpack_(new Gtk::VBox(0,10),
-			0, gtkadd(new Gtk::Label( "!!! Indicates the password in the system database is different than\n the one in the Terminal Server database.\nDelete/re-add the user to the Terminal Server to enable login." )),
-			0, gtkadd(new Gtk::HBox(0,20),
-				createScrolledWindow($list_sys_users),
-				gtkadd(new Gtk::VBox(1,10),
-					new Gtk::HBox(0,10),
-					gtksignal_connect(new Gtk::Button(_("Add User -->")), clicked => 
-						sub { my $result = adduser(0, $sys_user);
-							if ($result eq 0) { 
-								$list_ts_users->add(gtkshow(gtksignal_connect(new Gtk::ListItem($sys_user), 
-								select => sub { $ts_user = $sys_user;
-								$list_ts_users->show(); })));
-							}
-						}),
-					gtksignal_connect(new Gtk::Button(_("<-- Del User")), clicked => 
-						sub { deluser(0, $ts_user);
-							$list_ts_users->remove_items($list_ts_users->selection);
-						}),
-					new Gtk::HBox(0,10),
-				),
-				createScrolledWindow($list_ts_users),
-			),),
-	);
-	
-	$central_widget = \$user_box;
-	$user_box->show_all();
-}
-
-sub maintain_clients {
-	#- add client machines to Terminal Server config
-	my $client_box;
-	my %clients = read_dhcpd_conf();
-	my $client;
-	
-	#- client info in tree view
-	my $tree_clients = new Gtk::Tree();
-	foreach my $key(keys(%clients)){
-		my $t = $key;
-		my $t_client= new_with_label Gtk::TreeItem($t);
-		gtksignal_connect($t_client, select => sub { $client = $t; });
-		$tree_clients->append($t_client);
-		
-		my $c_detail = new Gtk::Tree();
-		$t_client->set_subtree($c_detail);
-		
-		my $c_det_hw = new_with_label Gtk::TreeItem($clients{$key}->{hardware});
-		$c_detail->append($c_det_hw);
-		$c_det_hw->show();
-
-		my $c_det_ip = new_with_label Gtk::TreeItem($clients{$key}->{address});
-		$c_detail->append($c_det_ip);
-		$c_det_ip->show();
-		
-		my $c_det_nbi = new_with_label Gtk::TreeItem($clients{$key}->{filename});
-		$c_detail->append($c_det_nbi);
-		$c_det_nbi->show();		
-	}
-	$tree_clients->set_selection_mode('single');
-
-	#- entry boxes for client data entry
-	my $label_host = new Gtk::Label("Client Name:");
-	$label_host->set_justify(left);
-	my $entry_host = new Gtk::Entry(20);
-	my $label_mac = new Gtk::Label("MAC Address:");
-	$label_mac->set_justify(left);
-	my $entry_mac = new Gtk::Entry(20);
-	my $label_ip = new Gtk::Label("IP Address:");
-	$label_ip->set_justify(left);
-	my $entry_ip = new Gtk::Entry(20);
-	my $label_nbi = new Gtk::Label("Kernel Netboot Image:");
-	$label_nbi->set_justify(left);
-	my $entry_nbi = new Gtk::Combo();
-
-	my @images = grep(/\.nbi/, all("/var/lib/tftpboot/"));
-	$entry_nbi->set_popdown_strings(@images);
-	$entry_nbi->set_value_in_list(1, 0);
-			 
-	gtkpack($status_box,
-		my $client_box = gtkpack_(new Gtk::VBox(1,10),
-			0, gtkadd(new Gtk::HBox(0,10),
-				gtkadd(new Gtk::VBox(0,5),
-					gtkadd($label_host), gtkadd($entry_host),
-					gtkadd($label_mac), gtkadd($entry_mac),
-					gtkadd($label_ip), gtkadd($entry_ip),
-					gtkadd($label_nbi), gtkadd($entry_nbi),
-				),
-				gtkadd(new Gtk::VBox(1,10),
-					new Gtk::HBox(1,1),
-					gtksignal_connect(new Gtk::Button(_("Add Client -->")), clicked => 
-						sub { my $hostname = $entry_host->get_text();
-							my $mac = $entry_mac->get_text();
-							my $ip = $entry_ip->get_text();
-							my $nbi = $entry_nbi->entry->get_text(); 
-							if ( $hostname ne '' && $mac ne '' && $ip ne '' && $nbi ne '') {
-	
-								my $result = addclient(0, $hostname, $mac, $ip, $nbi);
-								
-								if ( $result eq 0 ) {
-									my $t_client= new_with_label Gtk::TreeItem($hostname);
-									gtksignal_connect($t_client, select => sub { $client = $hostname; });
-									$tree_clients->append($t_client);
-		
-									my $c_detail = new Gtk::Tree();
-									$t_client->set_subtree($c_detail);
-		
-									my $c_det_hw = new_with_label Gtk::TreeItem($mac);
-									$c_detail->append($c_det_hw);
-									$c_det_hw->show();
-								
-									my $c_det_ip = new_with_label Gtk::TreeItem($ip);
-									$c_detail->append($c_det_ip);
-									$c_det_ip->show();
-		
-									my $c_det_nbi = new_with_label Gtk::TreeItem($nbi);
-									$c_detail->append($c_det_nbi);
-									$c_det_nbi->show();
-									$t_client->show();
-								}		
-							}
-						}),
-					gtksignal_connect(new Gtk::Button(_("<-- Del Client")), clicked => 
-						sub { my $result = delclient(0, $client);
-							if ( $result eq 0 ) {
-								$tree_clients->remove_items($tree_clients->selection);
-							}
-						}),
-					gtksignal_connect(new Gtk::Button(_("dhcpd Config...")), clicked => 
-						sub { ${$central_widget}->destroy(); dhcpd_config(); }),
-					new Gtk::HBox(1,1),
-				),
-				createScrolledWindow($tree_clients),
-			),),
-	);
-	
-	$central_widget = \$client_box;
-	$client_box->show_all();
-}
-
-sub dhcpd_config {
-	#- do main dhcp server config
-	my $dhcpd_box;
-	my @netmask = ();
-	my @broadcast = ();
-	my @netconfig = ();
-	my @ifconfig = ();
-	my @ifvalues = ();
-	my @resolve = ();
-	my @nserve = ();
-	my %netconfig;
-	my @subnet = ();
-	my @nservers = ();
-						
-	#- entry boxes for data entry
-	my $box_subnet = new Gtk::HBox(0,0);
-	my $label_subnet = new Gtk::Label("Subnet:");
-	$label_subnet->set_justify(right);
-	my $entry_subnet = new Gtk::Entry(20);	
-	$box_subnet->pack_end($entry_subnet, 0, 0, 10);
-	$box_subnet->pack_end($label_subnet, 0, 0, 10);
-	
-	my $box_netmask = new Gtk::HBox(0,0);
-	my $label_netmask = new Gtk::Label("Netmask:");
-	$label_netmask->set_justify(left);
-	my $entry_netmask = new Gtk::Entry(20);
-	$box_netmask->pack_end($entry_netmask, 0, 0, 10);
-	$box_netmask->pack_end($label_netmask, 0, 0, 10);
-	
-	my $box_routers = new Gtk::HBox(0,0);
-	my $label_routers = new Gtk::Label("Routers:");
-	$label_routers->set_justify(left);
-	my $entry_routers = new Gtk::Entry(20);
-	$box_routers->pack_end($entry_routers, 0, 0, 10);
-	$box_routers->pack_end($label_routers, 0, 0, 10);
-	
-	my $box_subnet_mask = new Gtk::HBox(0,0);
-	my $label_subnet_mask = new Gtk::Label("Subnet Mask:");
-	$label_subnet_mask->set_justify(left);
-	my $entry_subnet_mask = new Gtk::Entry();
-	$box_subnet_mask->pack_end($entry_subnet_mask, 0, 0, 10);
-	$box_subnet_mask->pack_end($label_subnet_mask, 0, 0, 10);
-	
-	my $box_broadcast = new Gtk::HBox(0,0);
-	my $label_broadcast = new Gtk::Label("Broadcast Address:");
-	$label_broadcast->set_justify(left);
-	my $entry_broadcast = new Gtk::Entry(20);
-	$box_broadcast->pack_end($entry_broadcast, 0, 0, 10);
-	$box_broadcast->pack_end($label_broadcast, 0, 0, 10);
-	
-	my $box_domain = new Gtk::HBox(0,0);
-	my $label_domain = new Gtk::Label("Domain Name:");
-	$label_domain->set_justify(left);
-	my $entry_domain = new Gtk::Entry(20);
-	$box_domain->pack_end($entry_domain, 0, 0, 10);
-	$box_domain->pack_end($label_domain, 0, 0, 10);
-	
-	my $box_name_servers = new Gtk::HBox(0,0);
-	my $box_name_servers_entry = new Gtk::VBox(0,0);
-	my $label_name_servers = new Gtk::Label("Name Servers:");
-	$label_name_servers->set_justify(left);
-	my $entry_name_server1 = new Gtk::Entry();
-	my $entry_name_server2 = new Gtk::Entry();
-	my $entry_name_server3 = new Gtk::Entry();
-	$box_name_servers_entry->pack_start($entry_name_server1, 0, 0, 0);
-	$box_name_servers_entry->pack_start($entry_name_server2, 0, 0, 0);
-	$box_name_servers_entry->pack_start($entry_name_server3, 0, 0, 0);
-	$box_name_servers->pack_end($box_name_servers_entry, 0, 0, 10);
-	$box_name_servers->pack_end($label_name_servers, 0, 0, 10);
-
-	#- grab some default entries from the running system
-	
-	if ( -e "/etc/sysconfig/network") {
-		%netconfig = getVarsFromSh("/etc/sysconfig/network");
-		$entry_domain->set_text($netconfig{DOMAINNAME});
-	}
-	
-	if ( -e "/etc/sysconfig/network-scripts/ifcfg-eth0") {
-		%netconfig = getVarsFromSh("/etc/sysconfig/network-scripts/ifcfg-eth0");
-		$entry_netmask->set_text($netconfig{NETMASK});
-		$entry_subnet_mask->set_text($netconfig{NETMASK});
-		
-	}
-	
-	@ifconfig = grep(/inet/, `/sbin/ifconfig eth0`);
-	@ifvalues = split(/[: \t]+/, $ifconfig[0]);
-	$entry_broadcast->set_text($ifvalues[5]);
-	
-	@broadcast = split(/\./, $ifvalues[5]);
-	@netmask = split(/\./, $netconfig{NETMASK});
-	
-	foreach (0..3) {
-		#- wasn't evaluating the & as expected
-		my $val1= $broadcast[$_] + 0;
-		my $val2 = $netmask[$_] + 0;
-		$subnet[$_] = $val1 & $val2;
-	}
-	
-	$entry_subnet->set_text(join(".", @subnet));
-		
-	my @route = grep(/^0.0.0.0/, `/sbin/route -n`);
-	@ifvalues = split(/[ \t]+/, $route[0]);
-	$entry_routers->set_text($ifvalues[1]);
-	
-	@resolve = cat_("/etc/resolv.conf");
-	my $i = 1;
-	chop(@resolve);
-	
-	foreach (@resolve) {
-		@ifvalues = split(/ /, $_);
-		if (($ifvalues[0] =~ /nameserver/) && ($i lt 4)){
-			$nservers[$i] = $ifvalues[1]; $i++;
-		}
-	}
-	
-	$entry_name_server1->set_text($nservers[1]);
-	$entry_name_server2->set_text($nservers[2]);
-	$entry_name_server3->set_text($nservers[3]);
-	
-	gtkpack($status_box, 
-		$dhcpd_box = gtkpack_(new Gtk::HBox(1,10),
-			0, gtkadd((new Gtk::VBox),
-				gtkadd($box_subnet),
-				gtkadd($box_netmask),
-				gtkadd($box_routers),
-				gtkadd($box_subnet_mask),
-				gtkadd($box_broadcast),
-				gtkadd($box_domain),
-				gtkadd($box_name_servers),
-			),
-			0, gtkadd(new Gtk::VBox(0,0),
-				new Gtk::Label("dhcpd Server Configuration\n\n
-					Most of these values were extracted
-					from your running system.  You can
-					modify as needed."),
-				gtksignal_connect(new Gtk::Button(_("Write Config")), clicked => 
-						sub { write_dhcpd_config(
-							$entry_subnet->get_text(),
-							$entry_netmask->get_text(),
-							$entry_routers->get_text(),
-							$entry_subnet_mask->get_text(),
-							$entry_broadcast->get_text(),
-							$entry_domain->get_text(),
-							$entry_name_server1->get_text(),
-							$entry_name_server2->get_text(),
-							$entry_name_server3->get_text()						
-						);}),
-				new Gtk::HBox(0,10),
-			),
-		),
-	);	
-
-	$central_widget = \$dhcpd_box;
-	$dhcpd_box->show_all();	
-}
-
-sub write_dhcpd_config {
-	my( $subnet, $netmask, $routers, $subnet_mask, $broadcast, $domain, $ns1, $ns2, $ns3) = @_;
-
-	$nfs_subnet = $subnet;
-	$nfs_mask = $subnet_mask;
-	
-	open(FHANDLE, "> /etc/dhcpd.conf");
-	print FHANDLE "#dhcpd.conf - generated by drakTermServ\n\n";
-	print FHANDLE "ddns-update-style none;\n\n";
-	print FHANDLE "# Long leases (48 hours)\ndefault-lease-time 172800;\nmax-lease-time 172800;\n\n";
-	print FHANDLE "# Include Etherboot definitions and defaults\ninclude \"/etc/dhcpd.conf.etherboot.include\";\n\n";
-	print FHANDLE "# Network-specific section\n\n";
-	
-	print FHANDLE "subnet $subnet netmask $netmask {\n";
-	print FHANDLE "\toption routers $routers;\n" if $routers;
-	print FHANDLE "\toption subnet-mask $subnet_mask;\n" if $subnet_mask;
-	print FHANDLE "\toption broadcast-address $broadcast;\n" if $broadcast;
-	print FHANDLE "\toption domain-name \"$domain\";\n" if $domain;
-	
-	my $ns_string = "\toption domain-name-servers " . $ns1 if $ns1;
-	$ns_string = $ns_string . ", " . $ns2 if $ns2;
-	$ns_string = $ns_string . ", " . $ns3 if $ns3;
-	$ns_string = $ns_string . ";\n" if $ns_string;
-	print FHANDLE $ns_string if $ns_string;
-
-	print FHANDLE "}\n\n";
-	
-	print FHANDLE "# Include client machine configurations\ninclude \"/etc/dhcpd.conf.etherboot.clients\";\n";
-	close FHANDLE	
-}
-
-sub write_eb_image {
-	#- write a bootable etherboot CD image or floppy
-	my ($nic, $rom_path, $type) = @_;	 	
-	if ($type eq 'floppy') {
-		my $in = interactive->vnew;
-		if ( -e "/dev/fd0" ) {
-			my $result = $in->ask_okcancel(_("Please insert floppy disk:"));
-			return if !($result);
-			$result = system("cat $rom_path/boot1a.bin $rom_path/lzrom/$nic > /dev/fd0") if $result;
-			if ($result) {
-				$in->ask_warn('',_("Couldn't access the floppy!"))
-			} else { 
-				$in->ask_warn('',_("Floppy can be removed now"))
-			}
-		} else {
-			$in->ask_warn('',_("No floppy drive available!"));
-		}
-	} else {
-		mkdir_p("/tmp/eb");
-		system("cat $rom_path/boot1a.bin $rom_path/lzrom/$nic > /tmp/eb/eb.img");
-		system("dd if=/dev/zero of=/tmp/eb/eb.img bs=512 seek=72 count=2808");
-		system("mkisofs -b eb.img -o /tmp/$nic.iso /tmp/eb");
-		rm_rf("/tmp/eb");
-		if ( -e "/tmp/eb.iso" ) {
-			$in->ask_warn('',_("Etherboot ISO image is /tmp/$nic.iso"))
-		} else { 
-			$in->ask_warn('',_("Something went wrong!"))
-		}		
-	}
-}
-
-sub enable_ts {
-	#- setup default config files for terminal server
-
-	my $cmd_line = @_;
-
-	@buff = ();
-	$buff[0] = "Enabling Terminal Server...\n\n";
-	$buff[1] = "\tChecking default /etc/dhcpd.conf...\n";
-	my @my_conf = cat_("/etc/dhcpd.conf");
-	if ($my_conf[0] !~ /drakTermServ/) {
-		if ($cmd_line eq 1) {
-			print("No /etc/dhcpd.conf built yet - use GUI to create!!\n");
-			return;
-		} else {
-			$in->ask_warn('',_("Need to create /etc/dhcpd.conf first!"));
-			#$central_widget->destroy;
-			dhcpd_config();
-			return;		
-		}
-	}
-	my $buff_index = toggle_chkconfig("on", "dhcpd", 2);
-	$buff[$buff_index] = "\tSetting up default /etc/exports...\n";
-	cp_af("/etc/exports", "/etc/exports.mdkTS");
-	open(FHANDLE, "> /etc/exports");
-	print FHANDLE "#/etc/exports - generated by drakTermServ\n\n";
-	print FHANDLE "/\t(ro,all_squash)\n";
-	print FHANDLE "/home\t$nfs_subnet/$nfs_mask(rw,root_squash)\n";
-	close FHANDLE;
-	$buff_index = toggle_chkconfig("on", "clusternfs", $buff_index+1);
-	$buff_index = toggle_chkconfig("on", "tftp", $buff_index);	
-	$buff_index = service_change("xinetd", "restart", $buff_index);
-	$buff[$buff_index] = "\n\tDone!";	
-	
-	if ($cmd_line == 1){
-		print "@buff\n";
-		return;
-	}
-
-    show_status(@buff);
-}
-
-sub disable_ts {
-	#- restore pre-terminal server configs 
-	my $cmd_line = @_;
-
-	@buff = ();
-	$buff[0] = "Disabling Terminal Server...\n\n";
-	$buff[1] = "\tRestoring original /etc/dhcpd.conf...\n";
-	cp_af("/etc/dhcpd.conf.mdkTS", "/etc/dhcpd.conf");
-	my $buff_index = toggle_chkconfig("off", "dhcpd", 2);
-	$buff[$buff_index] = "\tRestoring default /etc/exports...\n";
-	cp_af("/etc/exports.mdkTS", "/etc/exports");
-	$buff_index = toggle_chkconfig("off", "clusternfs", $buff_index+1);
-	$buff_index = toggle_chkconfig("off", "tftp", $buff_index);
-	$buff_index = service_change("xinetd", "restart", $buff_index);
-	$buff[$buff_index] = "\n\tDone!";	
-	
-	if ($cmd_line == 1){
-		print "@buff\n";
-		return;
-	}
-	
-	show_status(@buff);	
-}
-
-sub toggle_chkconfig {
-	#- change service config
-	my ($state, $service, $buff_index) = @_;
-	system("/sbin/chkconfig $service $state");
-	$buff[$buff_index] = "\tTurning $service $state...\n";
-	$buff_index++;
-	$buff_index;
-}
-
-sub service_change {
-	my ($service, $command, $buff_index) = @_;
-	system("/sbin/service $service $command > /tmp/drakTSservice.status 2>&1");
-	open(STATUS, "/tmp/drakTSservice.status");
-	while(<STATUS>) {
-		my ($phrase, $result) = split(':',$_);
-		$result = "[ OK ]" if ($result =~ /OK/);
-		$result = "[ FAIL ]" if ($result =~ /FAIL/);
-		$buff[$buff_index] = "\t$phrase:\t\t\t" . $result . "\n";
-		$buff_index++;
-	}
-	close STATUS;
-	unlink "/tmp/drakTSservice.status" or warn("Can't delete /tmp/drakTSservice.status\n");
-	$buff_index;		
-}
-	
-sub start_ts {
-	#- start the terminal server
-	my $cmd_line = @_;
-	
-	@buff = ();
-	$buff[0] = "Starting Terminal Server...\n\n";
-	my $buff_index = service_change("dhcpd", "start", 2);
-	$buff_index = service_change("clusternfs", "start", $buff_index);
-	$buff[$buff_index] = "\n\tDone!";	
-	
-	if ($cmd_line == 1){
-		print "@buff\n";
-		return;
-	}
-
-	show_status(@buff);
-}
-
-sub stop_ts {
-	#- stop the terminal server
-	my $cmd_line = @_;
-
-	@buff = ();
-	$buff[0] = "Stopping Terminal Server...\n\n";
-	my $buff_index = service_change("dhcpd", "stop", 2);
-	$buff_index = service_change("clusternfs", "stop", $buff_index);
-	$buff[$buff_index] = "\n\tDone!";	
-	
-	if ($cmd_line == 1){
-		print "@buff\n";
-		return;
-	}
-
-	show_status(@buff);
-
-}
-
-sub show_status {
-	#- just a generic routine to display an array of text in the GUI screen
-	my @buff = @_;
-	
-	my $text = new Gtk::Text(undef, undef);
-	my $status_t_box;
-	gtkpack($status_box,
-	    $status_t_box = gtkpack_(new Gtk::VBox(0,10),
-	       1, gtkpack_(new Gtk::HBox(0,0),
-			   1, gtktext_insert(gtkset_editable($text, 1), "@buff"),
-			),
-			),
-	);
-			   
-	$central_widget = \$status_t_box;		   
-	$status_box->show_all();	
-}
-
-sub adduser {
-	my ($cmd_line, $username) = @_;
-	my @active_users = cat_("/etc/shadow");
-	my @ts_users = cat_("/etc/shadow\$\$CLIENT\$\$");
-	my $is_user = grep(/$username/, @active_users);
-	my $add_fail = 0;
-	my $in_already;
-	
-	if ($is_user) {
-		my @shadow_entry = grep(/$username/, @active_users);
-		my $is_ts_user = grep(/$username/, @ts_users);
-		if ($is_ts_user) {
-			my @ts_shadow = grep(/$username/, @ts_users);
-			if ($shadow_entry[0] eq $ts_shadow[0]) {
-				$in_already = 1;
-			} else {
-				#in but password changed
-				print "$username passwd bad in Terminal Server - rewriting...\n";
-				deluser($cmd_line, $username);				
-				adduser($cmd_line, $username);				
-			}
-		} else {
-			# new ts user
-			open(FHANDLE, ">> /etc/shadow\$\$CLIENT\$\$");
-			print FHANDLE "$shadow_entry[0]" or $add_fail = 1; 
-			close FHANDLE;
-			$in_already = 0;
-		}
-	}	
-		
-	if ($cmd_line == 1){
-		print "$username is not a user..\n" if !($is_user);
-		print "$username is already a Terminal Server user\n" if $in_already;
-		if ($add_fail== 1 || $in_already || !$is_user) {
-			print "Addition of $username to Terminal Server failed!\n";
-		} else {		
-			print "$username added to Terminal Server\n";	
-		}
-		return;
-	} else {
-		$in_already;
-	}	
-}
-
-sub deluser {
-	# del a user from the shadow$$CLIENT$$ file
-	my ($cmd_line, $username) = @_;
-	my $i;
-	my $user;
-	my $user_deleted;
-		
-	my @ts_users = cat_("/etc/shadow\$\$CLIENT\$\$");
-	my $is_ts_user = grep(/$username/, @ts_users);
-	
-	if ($is_ts_user) {
-		$i = 0;
-		foreach $user (@ts_users) {
-			if ($user =~ /$username/) {
-				splice (@ts_users, $i, 1);
-				$user_deleted = 1;
-				break;
-			}
-			$i++;
-		}			
-		open(FHANDLE, "> /etc/shadow\$\$CLIENT\$\$");
-		foreach $user (@ts_users) {
-			print FHANDLE "$user";
-		} 
-		close FHANDLE;
-	}
-	
-	if ($cmd_line == 1){
-		if ($user_deleted) {
-			print "Deleted $username...\n";
-		} else {
-			print "$username not found...\n";
-		}
-		return;
-	}	
-}
-
-sub addclient {
-	#- add a new client entry after checking for dups
-	my ($cmd_line, $hostname, $mac, $ip, $nbi) = @_;
-
-	my $host_in_use = 0;
-	my $mac_in_use = 0;
-	my $ip_in_use = 0;
-	my $client;
-			
-	my %ts_clients = read_dhcpd_conf();
-
-	foreach $client(keys(%ts_clients)){
-		$host_in_use = 1 if ($hostname eq $client);
-		$mac_in_use = 1 if ($mac eq $ts_clients{$client}->{hardware});
-		$ip_in_use = 1 if ($ip eq $ts_clients{$client}->{address});
-	}
-	
-	if ($cmd_line == 1){
-		print "$hostname already in use\n" if $host_in_use;
-		print "$mac already in use\n" if $mac_in_use;
-		print "$ip already in use\n" if $ip_in_use;
-		if ($host_in_use || $mac_in_use || $ip_in_use) {
-			return;
-		}
-	}
-
-	if (!$host_in_use && !$mac_in_use && !$ip_in_use) {
-		$ts_clients{$hostname}->{hardware} = $mac;
-		$ts_clients{$hostname}->{address} = $ip;
-		$ts_clients{$hostname}->{filename} = $nbi;
-
-		my $clients = "/etc/dhcpd.conf.etherboot.clients";
-		open(CLIENT, ">> $clients") || warn ("Can't open $clients!");
-		print_client_entry("CLIENT", $hostname, %ts_clients);
-		close CLIENT;	
-		0;
-	} 
-}
-	
-sub delclient {
-	#- find a client and delete the entry in dhcpd.conf
-	my ($cmd_line, $hostname) = @_;
-	my $client;
-	my $host_found;
-	
-	my %ts_clients = read_dhcpd_conf();
-	
-	foreach $client(keys(%ts_clients)){
-		if ($hostname eq $client) {
-			$host_found = 1;
-			delete $ts_clients{$client};
-			write_dhcpd_conf(%ts_clients);
-			return 0;			
-		}
-	}
-		
-	if ($cmd_line == 1){
-		print "$hostname not found...\n" if (!$host_found);
-		return;
-	}	
-}
-
-sub print_client_entry {
-	#- print a client entry, in proper format
-	my ($handle, $client, %ts_clients) = @_;
-
-	print $handle "host $client {\n";
-	print $handle "\thardware ethernet\t$ts_clients{$client}->{hardware};\n";
-	print $handle "\tfixed-address\t\t$ts_clients{$client}->{address};\n";
-	print $handle "\tfilename\t\t\"$ts_clients{$client}->{filename}\";\n";
-	print $handle "}\n";
-}
-
-sub write_dhcpd_conf {
-	my %ts_clients = @_;
-	my $clients = "/etc/dhcpd.conf.etherboot.clients";
-	my $key;
-	
-	open(CLIENT, "> $clients") || warn ("Can't open $clients!");
-	foreach $key(keys(%ts_clients)){
-		print_client_entry("CLIENT", $key, %ts_clients);
-	}
-	close CLIENT	
-}
-
-sub read_dhcpd_conf {
-	my $clients = "/etc/dhcpd.conf.etherboot.clients";
-	my %ts_clients;
-	my $hostname;
-	
-	#- read and parse current client entries
-	open(CLIENTS, $clients) || warn("Can't open $clients\n"); 
-	while(<CLIENTS>) {
-		my ($name, $val, $val2) = split(' ',$_);
-		$val = $val2 if ($name =~ /hardware/);
-		$val =~ s/[;"]//g;
-		if ($name !~ /}/) {
-			if ($name =~ /host/) {
-				$hostname = $val;
-			} else {
-				$name = "address" if ($name =~ /fixed-address/);
-				$ts_clients{$hostname}->{$name} = $val;
-			}
-		}	
-	}
-	close CLIENTS;
-	%ts_clients;	
-}
diff --git a/perl-install/standalone/drakautoinst b/perl-install/standalone/drakautoinst
deleted file mode 100755
index ae7ce1e9a..000000000
--- a/perl-install/standalone/drakautoinst
+++ /dev/null
@@ -1,436 +0,0 @@
-#!/usr/bin/perl
-
-#
-# Guillaume Cottenceau (gc@mandrakesoft.com)
-#
-# Copyright 2001 MandrakeSoft
-#
-# This software may be freely redistributed under the terms of the GNU
-# public license.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use interactive;
-use devices;
-use detect_devices;
-use steps;
-use commands;
-use fs;
-use Data::Dumper;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakautoinst [--version]\n";
-/-version/ and die 'version: $Id$ '."\n";
-$::direct = /-direct/;
-$::direct = 1; #DEBUG
-
-my $in = 'interactive'->vnew('su', 'default');
-
-begin:
-$::isEmbedded and kill USR2, $::CCPID;
-
-my $imagefile = "/root/drakx/replay_install.img";
--f $imagefile or $in->ask_okcancel(_("Error!"), 
-				   _("I can't find needed image file `%s'.", $imagefile), 1), quit_global($in, 0);
-
-$::direct or $in->ask_okcancel(_("Auto Install Configurator"),
-_("You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.
-
-With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.
-
-For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.
-
-Do you want to continue?"), 1) or quit_global($in, 0);
-
-
-my @manual_steps = qw(doPartitionDisks formatPartitions);
-my @all_steps;
-my @choices;
-
-my $st = \%steps::installSteps;
-
-for (my $f = $st->{first}; $f; $f = $st->{$f}{next}) {
-    next if member($f, @manual_steps);
-    my $def_choice = 'replay';
-    push @choices, { label => _($st->{$f}{text}), val => \$def_choice, list => [ _('replay'), _('manual') ] };
-    push @all_steps, [ $f, \$def_choice ];
-}
-
-$in->ask_from(_("Automatic Steps Configuration"),
-	      _("Please choose for each step whether it will replay like your install, or it will be manual"),
-	      \@choices
-	     ) or quit_global($in, 0);
-
-${$_->[1]} eq _('manual') and push @manual_steps, $_->[0] foreach @all_steps;
-
-my $mountdir = "/root/tmp/drakautoinst-mountdir"; -d $mountdir or mkdir $mountdir, 0755;
-my $floppy = detect_devices::floppy();
-my $dev = devices::make($floppy);
-$in->ask_okcancel('', _("Insert a blank floppy in drive %s", $floppy), 1) or quit_global($in, 0);
-{
-    my $w = $in->wait_message('', _("Creating auto install floppy"));
-    commands::dd("if=$imagefile", "of=$dev", "bs=1440", "count=1024");
-    common::sync();
-}
-fs::mount($dev, $mountdir, 'vfat', 0);
-my $cfgfile = "$mountdir/auto_inst.cfg";
-eval(cat_($cfgfile));
-my $o_old = $o;
-
-if (!$::isEmbedded && $in->isa('interactive_gtk')) {
-    require Gtk;
-    init Gtk;
-    require my_gtk;
-    import my_gtk qw(:helpers :wrappers);
-
-    my %tree;
-    $struct_gui{$_} = 'General' foreach qw(lang isUpgrade autoExitInstall timezone default_packages mkbootdisk);
-    $struct_gui{$_} = 'Security' foreach qw(crypto security);
-    $struct_gui{$_} = 'Harddrive' foreach qw(partitions manualFstab useSupermount partitioning);
-    $struct_gui{$_} = 'Network' foreach qw(intf netc netcnx);
-    $struct_gui{$_} = 'Users' foreach qw(superuser users authentication);
-    $struct_gui{$_} = 'Hardware' foreach qw(keyboard mouse X printer wacom nomouseprobe);
-
-    %pixmap = ( lang => 'language',
-		isUpgrade => '',
-		security => 'security',
-		autoExitInstall => '',
-		timezone => '',
-		default_packages => '',
-		partitions => 'harddrive',
-		manualFstab => 'partition',
-		useSupermount => '',
-		partitioning => 'partition',
-		intf => 'network',
-		netc => 'network',
-		netcnx => 'network',
-		superuser => 'user',
-		users => 'user',
-		authentication => '',
-		keyboard => 'keyboard',
-		mouse => 'mouse',
-		X => 'X',
-		printer => 'printer',
-		wacom => '',
-	      );
-
-    member($_, keys %struct_gui) and push @{$tree{$struct_gui{$_}}}, [$_ , $pixmap{$_}, h2widget($o->{$_}, "\$o->\{$_\}") ] foreach (keys %$o);
-
-    my $W = my_gtk->new(_('$o edition'));
-    my @box_to_hide;
-    my $nb_pages=0;
-    my $notebook = new Gtk::Notebook;
-    $notebook->set_show_border(0);
-    $notebook->set_show_tabs(0);
-    $notebook->append_page(gtkpack_(gtkset_border_width(new Gtk::VBox(0,0), 10),
-				    1, new Gtk::VBox(0,0),
-				    0, gtkpack_(new Gtk::HBox(0,0),
-						1, new Gtk::VBox(0,0),
-						0, gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched-in'),
-							  new Gtk::Pixmap(gtkcreate_png('mdk_logo'))),
-						1, new Gtk::VBox(0,0),
-					       ),
-				    0, _("\nWelcome.\n\nThe parameters of the auto-install are available in the sections on the left"),
-				    1, new Gtk::VBox(0,0),
-				   ), undef);
-    $notebook->show_all;
-    $notebook->set_page(0);
-
-    gtkadd($W->{window},
-	   gtkpack_(new Gtk::VBox(0,5),
-	   1, gtkpack_(new Gtk::HBox(0,0),
-		    0, gtkadd(gtkset_usize(gtkset_shadow_type(new Gtk::Frame, 'in'), 130, 470),
-			    gtkpack_(new Gtk::VBox(0,0),
-				     map {
-					 my $box = new Gtk::VBox(0,0);
-					 push @box_to_hide, $box;
-					 $box->{vis} = 0;
-					 my @button_to_hide;
-					 0, gtksignal_connect(new Gtk::Button($_), clicked => sub {
-								if($box->{vis}) { $box->hide(); $box->{vis} = 0; $notebook->set_page(0); }
-								else {
-								    $_->hide, $_->{vis}=0 foreach @box_to_hide;
-								    $box->show; $box->{vis} = 1;
-								    $box->{active_function} and $box->{active_function}->();
-								}
-							    }), 1, gtkpack__($box,
-							  map {
-							      my $button = gtkset_relief(new Gtk::ToggleButton(), 'none');
-							      push @button_to_hide, $button;
-							      my $gru = $_->[0];
-							      $notebook->append_page(gtkshow($_->[2]), undef);
-							      $nb_pages++;
-							      my $local_page = $nb_pages;
-							      my $function = sub { $notebook->set_page($local_page) };
-							      gtksignal_connect($button, toggled => sub {
-										    $button->get_active() and $function->()
-										});
-							      my $b;
-							      if ($_->[1] ne "") { $b = new Gtk::Pixmap(gtkcreate_png($_->[1]))} else { $b = ()};
-							      gtksignal_connect(gtkadd($button,
-										       gtkpack__(new Gtk::VBox(0,3),
-												 $b,
-												 _($_->[0]),
-												)
-										      ), released => sub {
-											  $button->get_active() or $button->set_active(1),return;
-											  $_->set_active(0) foreach @button_to_hide;
-											  $button->set_active(1);
-											  $box->{active_function} = $function;
-											  $function->();
-										      })
-									    } @{$tree{$_}}
-									   )
-							} keys(%tree)
-				    )
-			   ),
-		    1, $notebook,
-		   ),
-	    0, new Gtk::HSeparator,
-	    0, gtkadd(gtkset_border_width(gtkset_layout(new Gtk::HButtonBox, 'end'), 5),
-		      gtksignal_connect(new Gtk::Button(_("Accept")), clicked => sub { Gtk->main_quit;  }),
-		      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { $o = $o_old; Gtk->main_quit; quit_global($in, 0) }),
-		     )
-	   )
-	  );
-    $_->hide foreach @box_to_hide;
-#    $W->{window}->show_all;
-#      gtkadd($W->{window},
-#  	   gtkpack_($W->create_box_with_title(_("Edit variables")),
-#  		    1, my $notebook = create_notebook( map { $_, h2widget($o->{$_}, "\$o->\{$_\}") } keys %$o ),
-#  		    0, gtkpack(gtkset_border_width(new Gtk::HBox(0,0),5), $W->create_okcancel),
-#  		   ),
-#  	  );
-#    $notebook->set_tab_pos('left');
-#    $::isEmbedded and Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill (12, $::CCPID);
-    $W->main;
-#    $W->destroy();
-}
-
-my $str = join('',
-"#!/usr/bin/perl -cw
-#
-# Special file generated by ``drakautoinst''.
-#
-# You should check the syntax of this file before using it in an auto-install.
-# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
-# (note the '#!/usr/bin/perl -cw' on the first line).
-",
-	       Data::Dumper->Dump([$o], ['$o']), q(
-package install_steps_auto_install;
-$graphical = 1;
-), Data::Dumper->Dump([\@manual_steps], ['$msteps']),
-q(push @graphical_steps, @$msteps;
-), "\0");
-$str =~ s/ {8}/\t/g; #- replace all 8 space char by only one tabulation, this reduces file size so much :-)
-output($cfgfile, $str);
-
-fs::umount($mountdir);
-
-$in->ask_okcancel(_("Congratulations!"), 
-_("The floppy has been successfully generated.
-You may now replay your installation."));
-
-quit_global($in, 0);
-
-
-sub quit_global {
-    my ($in, $exitcode) = @_;
-    $::isEmbedded ? kill USR1, $::CCPID : $in->exit($exitcode);
-    goto begin;
-}
-
-
-
-sub h2widget {
-    my ($k, $label) = @_;
-    my $w;
-    if(ref($k) =~ /HASH/) {
-	my $vb;
-	my @widget_list;
-	my $i = -1;
-	my @list_keys = keys(%{$k});
-	if (ref(${$k}{$list_keys[0]}) =~ /HASH/) {
-	    $i++;
-	    my ($button_add, $button_remove);
-	    $w = gtkpack_(new Gtk::VBox(0,0),
-			  1, createScrolledWindow(gtkpack__($vb = new Gtk::VBox(0,10),
-							    $widget_list[$i] = create_packtable({ col_spacings => 10, row_spacings => 3 },
-					map {
-					    my $e;
-					    $e = h2widget(${$k}{$_}, "$label\{$_\}");
-					    [ "$_ : ", $e ] } @list_keys
-									    ),
-						       )
-					     ),
-			  control_buttons(${$k}{$list_keys[0]},
-					  sub { my ($vb, $widget_list2, $ref_local_k, $i) = @_;
-						my @widget_list = @{$widget_list2};
-			my $field = $in->ask_from_entry(_("Auto Install"), ("Enter the name of the new field you want to add")) or return undef;
-						$field eq '' and return undef;
-						gtkpack__($vb,
-							  $widget_list[$i] = create_packtable({ col_spacings => 10, row_spacings => 3 },
-										      [ "$field : ", h2widget($ref_local_k, "$label\{$field\}")])
-							 );
-						@{$widget_list2} = @widget_list;
-					    },
-					  $vb, \$i, \@widget_list)
-			 );
-	} else {
-	    $w = create_packtable({ col_spacings => 10, row_spacings => 3 },
-				  map { create_entry_element(${$k}{$_}, "$label\{$_\}", $_) } @list_keys
-				 )
-	}
-    } elsif(ref($k) =~ /ARRAY/) {
-	my $vb;
-	my @widget_list;
-	my $i = -1;
-	$w = gtkpack_(new Gtk::VBox(0,0),
-		      1, createScrolledWindow(
-					      gtkpack__($vb = new Gtk::VBox(0,5),
-							map { $i++; $widget_list[$i] = h2widget($_, "$label\[$i\]") } @{$k},
-						       )
-					     ),
-		      control_buttons(@{$k}[0],
-				      sub { my ($vb, $widget_list2, $ref_local_k, $i) = @_;
-					    my @widget_list = @{$widget_list2};
-					    gtkpack__($vb, $widget_list[$i] = h2widget($ref_local_k, "$label\[$i\]"));
-					    @{$widget_list2} = @widget_list;
-					},
-				      $vb, \$i, \@widget_list)
-		     );
-    } else {
-	$label =~ /\$o->\{(.+)\}/;
-	$w = create_packtable({ col_spacings => 10, row_spacings => 3 },
-			      create_entry_element($k, $label, $1))
-    }
-    return $w;
-}
-
-
-sub create_entry_element {
-    my ($text, $value, $label) = @_;
-    my $e;
-    if(ref ($text) =~ /HASH/) {
-	return ([ "$label : ", h2widget($text, $label) ]);
-    } elsif (ref ($text) =~ /ARRAY/) {
-	return ([ "$label : ", h2widget($text, $label) ]);
-    } else {
-	$e = new Gtk::Entry;
-	$e->{value} = $value;
-	my $tag = Gtk->timeout_add(1000, sub { $e->set_text($text); 0 });
-	gtksignal_connect($e, changed => sub {
-			      my $exe = $e->{value} . "='" . $e->get_text() . "'";
-			      print "EXEC : $exe\n ";
-			      eval "$exe";
-			  });
-    }
-    [ $label ? "$label : " : "" , $e ]
-}
-
-sub control_buttons {
-    my ($ref_local_k, $local_gui, $vb, $j, $widget_list2) = @_;
-    my @widget_list = @{$widget_list2};
-    my $i = ${$j};
-    ref($ref_local_k) =~ /HASH/ or return();
-    my (%local_k) = %{$ref_local_k};
-    my ($button_add, $button_remove);
-    0, gtkadd(gtkset_border_width(gtkset_layout(new Gtk::HButtonBox, 'spread'), 5),
-	      gtksignal_connect($button_add = new Gtk::Button(_("Add an item")), clicked => sub {
-				    $local_k{$_} = undef foreach keys %local_k;
-				    $i++;
-				    $local_gui->($vb, \@widget_list, \%local_k, $i) or $i--, return;
-				    $i>=0 and $button_remove->set_sensitive(1);
-				}
-			       ),
-	      gtksignal_connect($button_remove = new Gtk::Button(_("Remove the last item")), clicked => sub {
-				    $i>=0 or return;
-				    $widget_list[$i]->destroy();
-				    $i--;
-				    $i>=0 or $button_remove->set_sensitive(0);
-				}
-			       )
-	     )
-}
-
-#-------------------------------------------------
-#- $Log$
-#- Revision 1.18  2002/03/06 20:17:51  damien
-#- corrected HASH and ARRAY label
-#-
-#- Revision 1.17  2002/01/29 22:38:31  gc
-#- move /root/* files (ddebug.log, install.log, report.bug,
-#- auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
-#- and also save stage1.log there
-#-
-#- Revision 1.16  2002/01/18 20:22:20  gc
-#- - write the 'common' part of the 'explanations' stuff,
-#-   with nice help from Pixel for the tough Perl part
-#- - move 'use standalone' up in all standalone apps,
-#-   to comply to 'explanations'
-#-
-#- Revision 1.15  2002/01/08 10:21:15  fpons
-#- removed stupid invocation of _("$_"), is it correct code to change it to $_ only ?
-#-
-#- Revision 1.14  2001/11/05 16:07:21  damien
-#- typo
-#-
-#- Revision 1.13  2001/10/30 20:11:31  damien
-#- corrected ref($in) =~ /gtk/
-#-
-#- Revision 1.12  2001/10/30 17:00:05  damien
-#- updated
-#-
-#- Revision 1.11  2001/10/26 13:45:11  damien
-#- progress bar hack
-#-
-#- Revision 1.10  2001/10/25 11:59:58  damien
-#- simple variables handled, code compression.
-#-
-#- Revision 1.9  2001/10/25 11:17:03  damien
-#- The new and shiny drakautoinst is coming. P|-|34R
-#-
-#- Revision 1.8  2001/10/25 02:18:24  damien
-#- The new drakautoinst is coming. P|-|34R
-#-
-#- Revision 1.7  2001/09/18 17:35:50  gc
-#- have "manual" and "replay" translated
-#-
-#- Revision 1.6  2001/09/14 17:30:23  siegel
-#- Check exisence of "/root/replay_install.img" before anything else ...
-#-
-#- Revision 1.5  2001/08/29 21:58:24  gc
-#- quit_global
-#-
-#- Revision 1.4  2001/08/26 14:34:10  gc
-#- require -> use
-#-
-#- Revision 1.3  2001/08/18 17:52:21  prigaux
-#- big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_
-#-
-#- Revision 1.2  2001/08/13 19:08:27  gc
-#- ouch! use lib from /usr/lib/libDrakX, rather than from ..
-#-
-#- Revision 1.1  2001/08/13 19:06:50  gc
-#- initial revision for drakautoinst
-#- - put %installSteps in a separate package (steps.pm) (for drakxtools)
-#- - use additional fields {auto} and {noauto}, by step, to ease interactive auto install and oem stuff
-#- - in install2.pm, perform each step either from the interactive class or from install_steps, according to the {auto} flag
-#- - id, tell each step to not try to be automatic if {noauto}
-#- - in the install, have auto install bootdisk created in install_any so we can always write a bootdisk (from install_steps) for further use from drakautoinst in standalone
-#- - interactive version of install_steps_auto_install is now inheriting from the interactive class, so we can click on a previous automatic step and have it interactively during an interactive auto install
-#-
-#-
diff --git a/perl-install/standalone/drakbackup b/perl-install/standalone/drakbackup
deleted file mode 100755
index 0a2414641..000000000
--- a/perl-install/standalone/drakbackup
+++ /dev/null
@@ -1,3352 +0,0 @@
-#!/usr/bin/perl -w
-#
-#  Copyright (C) 2001 MandrakeSoft by Sebastien DUPONT <dupont_s@epita.fr>
-#  Redistribution of this file is permitted under the terms of the GNU
-#  Public License (GPL)
-#
-#  This program is free software; you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation; either version 2, or (at your option)
-#  any later version.
-#
-#  This program is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with this program; if not, write to the Free Software
-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-#________________________________________________________________
-#
-#  Description:
-#
-#   Drakbackup is used to backup your system.
-#   During the configuration you can select 
-# 	- System files, 
-# 	- Users files, 
-# 	- Other files.
-# 	or All your system ...  and Other (like windows Partitions)
-#
-#   Drakbackup allows you to backup your system on:
-# 	- Harddrive.
-# 	- NFS.
-# 	- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).
-# 	- FTP.
-# 	- Rsync.
-# 	- Webdav.
-# 	- Tape.
-#
-#   Drakbackup allows you to Restore your system on
-#   choosen directory.
-#
-#   Per default all backup will be stored on your
-#   /var/lib/drakbackup directory
-#
-#   Configuration file:
-# 	/etc/drakconf/drakbackup/drakbakup.conf
-#
-#________________________________________________________________
-#
-#  Backup files formats:
-#	
-#	no incremental backup:
-#			backup_sys_date_hour.tar.*
-#			backup_user_toto_date_hour.tar.*
-#			backup_other_date_hour.tar.*
-#
-#	first incremental backup: (if backup_base* does not exist )
-#
-#			backup_base_sys_date_hour.tar.*
-#			backup_base_user_toto_date_hour.tar.*
-#			backup_base_other_date_hour.tar.*
-#			
-#	other incremental backup: (if backup_base* already exist )
-#
-#			backup_incr_sys_date_hour.tar.*
-#			backup_incr_user_toto_date_hour.tar.*
-#			backup_incr_other_date_hour.tar.*
-#
-#________________________________________________________________
-# 
-# REQUIRE:      cron if daemon
-#               cdrecord & mkisofs
-#		perl Net::FTP
-#		ssh-askpass
-#
-# BUGS :
-#		restore->other_media->next->previous => crash ...
-#		selection des sources a inclure dans le backup cd. 
-#		help -> ok after install_rpm
-#               
-# TODO:
-#		1 - print ftp problem for user. 
-#	        2 - calcul disk space.
-#		   use quota.
-#               3 - ssh & rsync -> expect or .identity.pub/authorized_keys 
-#		4 - write on cd --> ! change Joliet to HFS for Apple
-#		5 - cd writer detection  -> cdrw: /sys/dev/cdrom/info  /scsi/host0/bus0/target4/lun0 
-#			/proc/sys/dev/cdrom/
-#		6 - total backup.( all partitions wanted, windows partitions for example!)
-#		    dump use for total backup.
-#		7 - custom deamon
-#		8 - placer README dans $save_path -> prevenir des danger de supprimer la premier version
-#		    explain configuration file variables (mainly for non X users)
-#		9 - webdav
-#	        10- backend : --resore_all, --restore_sys, --restore_users
-#			  --build_cd_autoinst 	
-#			  --backup_now --backup_default_now
-#		11- tape device support		 
-#		12- cpio use !!
-#		13- boot floppy disk (with dialog)
-#		14- build autoboot with backup and install cd 
-#		15- use .backupignore like on CVS
-#		16- afficher les modif dans un fichier texte du meme nom 
-#			pour afficher durant le restore.
-#		17- futur: could be possible to restore a specific file 
-#			or directory at specific date. 
-#		18- possible all files each time from directory.
-#		               
-# DONE TODAY:
-#________________________________________________________________
-
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX );
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use my_gtk qw(:helpers :wrappers);
-use common;
-use strict;
-use Time::localtime;
-
-my $in = 'interactive'->vnew('', 'default');
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-if ("@ARGV" =~ /--help|-h/) {
-    print q(Backup and Restore application
-
---default             : save default directories.
---debug		      : show all debug messages.
---show-conf           : list of files or directories to backup.
---daemon              : use daemon configuration. 
---help                : show this message.
---version             : show version name.
-);
-    exit(0);
-}
-
-if ("@ARGV" =~ /--version/) {
-    print "DrakBakckup Version 1.0\n";
-    exit(0);
-}
-
-# Backend Options.      
-my $central_widget;
-my $previous_widget;
-my $current_widget;
-my $interactive;
-my $up_box;
-my $advanced_box;
-my $box2;
-my $cfg_file_exist = 0;
-my @all_user_list;
-my $list_other;
-my $DEBUG = 0;
-my $restore_sys = 1; 
-my $restore_user = 1; 
-my $restore_other = 1; 
-my $restore_step_sys_date = "";
-my @user_backuped = ();
-my @sys_backuped = ();
-my $sys_backuped = 0;
-my $other_backuped = 0;
-my @user_list_to_restore= ();
-my @sys_list_to_restore = ();
-my $cd_devive_entry;
-my $custom_help;
-my $button_box;
-my $button_box_tmp;
-my $next_widget;
-my $sav_next_widget;
-my $system_state;
-my $restore_state;
-my $save_path_entry;
-my $restore_find_path_entry;
-my $pbar;
-my $pbar1;
-my $pbar2;
-my $pbar3;
-my $the_time;
-my @user_list_to_restore2 = ();
-my @data_backuped = ();
-my $label_tail;
-my @list_to_build_on_cd = (); 
-my $restore_path = "/";
-my $restore_other_path = 0;
-my $restore_other_src;
-my $path_to_find_restore;
-my $other_media_hd;
-my $backup_bef_restore = 0;
-my $table;
-my @user_list_backuped = ();
-my @files_corrupted = ();
-my $remove_user_before_restore = 1;
-my @file_list_to_send_by_ftp = ();
-my $results;
-
-# config. FILES -> Default PATH  & Global variables.
-my @sys_files = ("/etc");
-my @user_list;
-my @list_other = () ;
-my $cfg_file = "/etc/drakxtools/drakbackup/drakbackup.conf";
-my $save_path = "/var/lib/drakbackup";
-my $comp_mode = 0;
-my $backup_sys = 1;
-my $backup_user = 1;
-my $backup_daemon = 1;
-my $backup_sys_versions = 1;
-my $backup_user_versions = 1;
-my $backup_other_versions = 0;
-my $what_no_browser = 1;
-my $cdrw = 0;
-my $net_proto= '';
-my $host_path = '';
-my $login_user = '';
-my $daemon = 0;
-my $ssh_daemon = 0;
-my $ftp_daemon = 0;
-my $hd_daemon = 0;
-my $cd_daemon = 0;
-my $hd_quota = 0;
-my $where_net_ftp = 0;
-my $where_net_ssh = 0;
-my $where_net = 0;
-my $where_hd = 1;
-my $where_cd = 0;
-my $where_tape = 0;
-my $cd_time = 650;
-my $when_space;
-my $cd_with_install_boot = 0;
-my $cd_devive = '';
-my $host_name = '';
-my $backupignore = 0; 
-my $auth_choice = 0;
-my $remember_pass = 0;
-my $passwd_user= '';
-my $save_device_tape = ();
-my $cdrw_erase = 0;
-my $no_critical_sys = 1;
-my $send_mail = 0;
-my $user_mail;
-my @user_info;
-
-foreach (@ARGV) {
-    /--default/ and backend_mode();
-    /--daemon/ and daemon_mode();
-    /--show-conf/ and show_conf();
-    /--debug/ and $DEBUG = 1, next;
-}
-
-sub show_conf {
-    print "DrakBakckup configuration:\n\n";
-    read_conf_file();
-    system_state();
-    print $system_state . "\n";
-    exit(0);
-}
-
-sub backend_mode {
-    build_backup_files();
-    exit(0);
-}
-
-sub daemon_mode {
-    $daemon = 1;
-    build_backup_files();
-    exit(0);
-}
-
-interactive_mode();
-
-sub all_user_list {
-    my ($uname, $uid);
-    @all_user_list = ();
-    setpwent();
-    do {
-	@user_info = getpwent();
-	($uname, $uid) = @user_info[0,2];
-	push (@all_user_list, $uname) if ($uid > 500) and !($uname eq "nobody");
-    } while (@user_info);
-}
-
-sub the_time {
-    $the_time = "_";
-    $the_time .= localtime->year() + 1900;
-    if (localtime->mon() < 9 ) { $the_time .= "0"; }
-    $the_time .= localtime->mon() +1;
-    if (localtime->mday() < 10 ) { $the_time .= "0"; }
-    $the_time .= localtime->mday();
-    $the_time .= "_";
-    if (localtime->hour() < 10 ) { $the_time .= "0"; }
-    $the_time .= localtime->hour();
-    if (localtime->min() < 10 ) { $the_time .= "0"; }
-    $the_time .= localtime->min();
-    if (localtime->sec() < 10 ) { $the_time .= "0"; }
-    $the_time .= localtime->sec();    
-}
-
-sub save_conf_file {
-    my @cfg_list = ( "SYS_FILES=@sys_files\n",
-		     "HOME_FILES=@user_list\n", 
-		     "OTHER_FILES=@list_other\n",
-		     "PATH_TO_SAVE=$save_path\n",
-		     "HOST_PATH=$host_path\n",
-		     "NET_PROTO=$net_proto\n",
-		     "CD_TIME=$cd_time\n",
-		     "USER_MAIL=$user_mail\n",		     
-		     "DAEMON_TIME_SPACE=$when_space\n",
-		     "CDRW_DEVICE=$cd_devive\n",
-		     "LOGIN=$login_user\n",
-		     "TAPE_DEVICE=$save_device_tape\n",
-		     "HOST_NAME=$host_name\n"
-		     );
-    $no_critical_sys and push @cfg_list, "NO_CRITICAL_SYS\n" ; 
-    $no_critical_sys or push @cfg_list, "CRITICAL_SYS\n" ; 
-    $send_mail and push @cfg_list, "SEND_MAIL\n";
-    $backup_sys_versions and push @cfg_list, "SYS_INCREMENTAL_BACKUPS\n" ; 
-    $backup_user_versions and push @cfg_list, "USER_INCREMENTAL_BACKUPS\n" ; 
-    $backup_other_versions  and push @cfg_list, "OTHER_INCREMENTAL_BACKUPS\n" ; 
-    $cdrw_erase and push @cfg_list, "CDRW_ERASE\n" ; 
-    $where_net_ftp and push @cfg_list, "USE_NET_FTP\n" ; 
-    $where_net_ssh and push @cfg_list, "USE_NET_SSH\n" ; 
-    $remember_pass and push @cfg_list, "LOGIN=$login_user\n" ; 
-    $remember_pass and push @cfg_list, "PASSWD=$passwd_user\n" ;
-    $remember_pass and push @cfg_list, "REMEMBER_PASS\n" ;
-    $auth_choice or push @cfg_list, "AUTH_CHOICE=0\n" ;
-    if ($auth_choice == 1) { push @cfg_list, "AUTH_CHOICE=1\n" ;}
-    if ($auth_choice == 2) { push @cfg_list, "AUTH_CHOICE=2\n" ;}
-    $cd_with_install_boot and push @cfg_list, "CD_WITH_INSTALL_BOOT\n" ;
-    $ssh_daemon and push @cfg_list, "SSH_DAEMON\n" ;
-    $ftp_daemon and push @cfg_list, "FTP_DAEMON\n" ;
-    $hd_daemon and push @cfg_list, "HD_DAEMON\n" ;
-    $cd_daemon and push @cfg_list, "CD_DAEMON\n" ;
-    $hd_quota and  push @cfg_list, "HD_QUOTA\n" ;
-    $where_hd and  push @cfg_list, "USE_HD\n" ;
-    $where_cd and  push @cfg_list, "USE_CD\n" ;
-    $where_net and  push @cfg_list, "USE_NET\n" ;
-    $cdrw and push @cfg_list, "CDRW\n"; 
-    $what_no_browser or push @cfg_list, "BROWSER_CACHE\n" ;
-    $backup_sys or push @cfg_list,  "NO_SYS_FILES\n";
-    if ($comp_mode) {push @cfg_list, "OPTION_COMP=TAR.BZ2\n"} 
-    else { push @cfg_list, "OPTION_COMP=TAR.GZ\n"   }
-    output_p($cfg_file, @cfg_list);
-    system("chmod 600 $cfg_file");
-    save_cron_files();
-}
-
-sub read_cron_files {
-    my $daemon_found = 0;
-    foreach (qw(hourly daily weekly monthly)) {
-	if (-f "/etc/cron.$_/drakbackup") {
-	    $when_space = $_;	    
-	    $daemon_found = 1;
-	    last;
-	}
-
-    }
-    !$daemon_found and $backup_daemon = 0; 
-}
-
-sub save_cron_files {
-    my @cron_file = ("#!/bin/sh\n", "\n", "/usr/sbin/drakbackup --daemon" );
-
-    if ($backup_daemon) {
-	foreach (qw(hourly daily weekly monthly)) {
-	    -f "/etc/cron.$_/drakbackup" and rm_rf("/etc/cron.$_/drakbackup");
-	}
-	output_p("/etc/cron.$when_space/drakbackup",  @cron_file );
-	system("chmod +x /etc/cron.$when_space/drakbackup");
-    } else {
-	foreach (qw(hourly daily weekly monthly)) {
-	    -f "/etc/cron.$_/drakbackup" and rm_rf("/etc/cron.$_/drakbackup");
-	}
-    }
-}
-
-sub read_conf_file {
-    if (-e $cfg_file) {
-        open ( CONF_FILE, "<"."$cfg_file") || print "You must be root to read configuration file. \n" ;
-        while (<CONF_FILE>) {
-	    next unless /\S/;
-	    next if /^#/;
-	    chomp;
-	    if (/^SYS_FILES/)           { s/^SYS_FILES=//gi;    @sys_files = split(' ', $_ );	}
-	    if (/^HOME_FILES/)		{ s/^HOME_FILES=//gi;   @user_list = split(' ', $_ );	}
-	    if (/^OTHER_FILES/)		{ s/^OTHER_FILES=//gi;  @list_other = split(' ', $_ );	}
-	    if (/^PATH_TO_SAVE/)	{ s/^PATH_TO_SAVE=//gi; $save_path = $_;	}
-	    if (/^NO_SYS_FILES/)   { $backup_sys = 0;}
-	    if (/^NO_USER_FILES/)  { $backup_user = 0;}
-	    if (/^OPTION_COMP/)    { s/^OPTION_COMP=//gi; /TAR.GZ/ and  $comp_mode = 0; /TAR.BZ2/ and $comp_mode = 1; }
-	    if (/^BROWSER_CACHE/)  { $what_no_browser = 0; }
-	    if (/^CDRW/)           { $cdrw = 1; }
-	    if (/^NET_PROTO/)      { s/^NET_PROTO=//gi; $net_proto = $_; }
-	    if (/^HOST_PATH/)      { s/^HOST_PATH=//gi; $host_path = $_; } 
-	    if (/^SSH_DAEMON/)	   { $ssh_daemon = 1; }
-	    if (/^FTP_DAEMON/)	   { $ftp_daemon = 1; }
-	    if (/^HD_DAEMON/)	   { $hd_daemon = 1; }
-	    if (/^CD_DAEMON/)	   { $cd_daemon = 1; }
-	    if (/^HD_QUOTA/)       { $hd_quota = 1;  }
-	    if (/^USE_HD/)         { $where_hd = 1;  }
-	    if (/^USE_CD/)         { $where_cd = 1;  }
-	    if (/^USE_NET/)        { $where_net = 1; }
-	    if (/^USE_TAPE/)       { $where_tape = 1; }
-	    if (/^CD_TIME/)        { s/^CD_TIME=//gi; $cd_time = $_; }
-	    if (/^DAEMON_TIME_SPACE/) { s/^DAEMON_TIME_SPACE=//gi; $when_space = $_; }
-	    if (/^CD_WITH_INSTALL_BOOT/) { $cd_with_install_boot = 1; }
-	    if (/^CDRW_DEVICE/)    { s/^CDRW_DEVICE=//gi; $cd_devive = $_;}
-	    if (/^HOST_NAME/)      { s/^HOST_NAME=//gi; $host_name = $_;} 
-	    if (/^AUTH_CHOICE/)    { s/^AUTH_CHOICE=//gi; $auth_choice = $_; }
-	    if (/^REMEMBER_PASS/)  { $remember_pass = 1; }
-	    if (/^LOGIN/)          { s/^LOGIN=//gi;  $login_user  = $_; $remember_pass = 1; }
-	    if (/^PASSWD/)         { s/^PASSWD=//gi; $passwd_user = $_; $remember_pass = 1; }
-	    if (/^USER_MAIL/)      { s/^USER_MAIL=//gi; $user_mail= $_; }		     
-	    if (/^USE_NET_FTP/)    { $where_net_ftp = 1;  }
-	    if (/^SEND_MAIL/)      { $send_mail = 1;  }
-	    if (/^USE_NET_SSH/)    { $where_net_ssh = 1;  }
-	    if (/^TAPE_DEVICE/)    { s/TAPE_DEVICE=//gi; $save_device_tape = $_;}
-	    if (/^CDRW_ERASE/)     { $cdrw_erase = 1;}
-	    if (/^SYS_INCREMENTAL_BACKUPS/)   { $backup_sys_versions = 1;}
-	    if (/^USER_INCREMENTAL_BACKUPS/)  { $backup_user_versions = 1;}
-	    if (/^OTHER_INCREMENTAL_BACKUPS/) { $backup_other_versions = 1;}
-	    if (/^NO_CRITICAL_SYS/)  { $no_critical_sys = 1;}
-	    if (/^CRITICAL_SYS/)  { $no_critical_sys = 0;}
-	}
-	read_cron_files();
-	$cfg_file_exist = 1;
-    } 
-    else { $cfg_file_exist = 0; }
-    close CONF_FILE;    
-}
-
-sub complete_results {
-    system_state();
-    $results .=  "***********************************************************************\n\n";
-    $daemon or $results .=  _("\n                      DrakBackup Report \n\n");
-    $daemon and $results .= _("\n                      DrakBackup Daemon Report\n\n\n");
-    $results .=  "***********************************************************************\n\n";
-    $results .= $system_state;
-    $results .=  "\n\n***********************************************************************\n\n";
-    $results .=             _("\n                    DrakBackup Report Details\n\n\n");
-    $results .=  "***********************************************************************\n\n";
-}
-
-
-sub ftp_client {
-    use Net::FTP; 
-    my $ftp;
-
-    $DEBUG and print "file list to send : $_\n "  foreach @file_list_to_send_by_ftp;
-    if ($DEBUG && $interactive) { $ftp = Net::FTP->new("$host_name", Debug => 1) or return(1);  }
-    elsif ($interactive)  {  $ftp = Net::FTP->new("$host_name", Debug => 0) or return(1); }
-    else {  $ftp = Net::FTP->new("$host_name", Debug => 0) or return(1); }
-    $ftp->login("$login_user","$passwd_user");
-    $ftp->cwd("$host_path"); 
-    foreach (@file_list_to_send_by_ftp) {
-	$pbar->set_value(0);
-	$interactive and progress($pbar, 0.5, $_);
-	$interactive and $pbar->set_show_text( $_ );
-	$ftp->put("$_");
-	$interactive and progress($pbar, 0.5, $_);
-	$interactive and $pbar->set_show_text( $_ );
-	$interactive and progress($pbar3, 1/@file_list_to_send_by_ftp, _("total progess"));
-    }
-    $ftp->quit; 
-    return(0);
-}
-
-sub ssh_client {
-    system("scp @file_list_to_send_by_ftp root\@petra:.");
-}
-
-sub write_on_cd {
-#  system("cdrecord ");
-}
-
-sub build_iso {
-#    system("mkisofs -r -J -T -v -V 'Drakbackup' -o drakbackup.iso /var/lib/drakbackup");
-}
-
-sub build_cd {
-    build_iso();
-}
-
-sub send_mail {
-    my ($result) = @_;
-    my $datem = `date`;
-
-    open F, "|/usr/sbin/sendmail -f$user_mail $user_mail" or return(1);
-    print F "From: drakbackup\n";
-    print F "To: $user_mail \n";
-    print F "Subject: DrakBackup report on $datem \n";
-    print F "\n";
-    print F "$result\n";
-    close F or  return(1);
-    return(0);
-}
-
-
-sub build_backup_files {
-    my $path_name;
-    my $tar_cmd;
-    my $more_recent;
-    my $tar_cmd_sys;
-    my $tar_cmd_user;
-    my $tar_cmd_other;
-    my $tar_ext;
-    my $vartemp;
-    my $base_sys_exist = 0;
-    my $base_user_exist = 0;
-    my $base_other_exist = 0;
-    my @list_temp = ();
-    my @list_other_;
-    my @dir_content = ();
-    my $file_date;
-    $results = "";
-
-    read_conf_file();
-    the_time();    
-    $send_mail and complete_results();
-    -d  $save_path or mkdir_p($save_path);
-    if ($comp_mode) { 
-	$DEBUG and $tar_cmd = "tar cv --use-compress-program /usr/bin/bzip2 ";
-	$DEBUG or $tar_cmd = "tar c --use-compress-program /usr/bin/bzip2 "; 
-	$tar_ext = "tar.bz2" ;
-    }
-    else { 
-	$DEBUG and $tar_cmd = "tar cvpz "; 
-	$DEBUG or $tar_cmd = "tar cpz "; 
-	$tar_ext = "tar.gz"
-	}
-    $tar_cmd_sys = $tar_cmd;
-    $tar_cmd_user = $tar_cmd;
-    $tar_cmd_other = $tar_cmd;
-    $no_critical_sys and $tar_cmd_sys .= "--exclude passwd --exclude fstab --exclude group --exclude mtab";
-    $what_no_browser and $tar_cmd_user .= "--exclude NewCache --exclude Cache --exclude cache";
-
-    -d $save_path and @dir_content = all($save_path);
-    grep (/^backup\_base\_sys/, @dir_content) and $base_sys_exist = 1;
-
-    if (($where_hd && !$daemon) || ($daemon && $hd_daemon)) {
-	$interactive and progress($pbar, 0.5, _("Backup system files..."));
-	if ($backup_sys) { 
-	    if ($backup_sys_versions) {
- 		if (grep /^backup\_incr\_sys/, @dir_content) { 
-		    my @more_recent = grep /^backup\_incr\_sys/, sort @dir_content; 
-		    $more_recent = pop @more_recent;
-		    $DEBUG and print "more recent file: $more_recent\n";
- system("find @sys_files -cnewer $save_path/$more_recent \! -type d -print > $save_path/list_incr_sys$the_time.txt");
-		    if (!cat_("$save_path/list_incr_sys$the_time.txt")) {
-			system("rm $save_path/list_incr_sys$the_time.txt");
-		    } else {
- system("$tar_cmd_sys -f $save_path/backup_incr_sys$the_time.$tar_ext -T $save_path/list_incr_sys$the_time.txt");
- push @file_list_to_send_by_ftp, "$save_path/backup_incr_sys$the_time.$tar_ext";
- push @file_list_to_send_by_ftp, "$save_path/list_incr_sys$the_time.txt";
- $results .= "\nfile: $save_path/backup_incr_sys$the_time.$tar_ext\n";
- $results .= cat_("$save_path/list_incr_sys$the_time.txt");
-		    }
-		}
-  		elsif (grep /^backup\_base\_sys/,  @dir_content) { 
-		    my @more_recent = grep /^backup\_base\_sys/, sort @dir_content; 
-		    $more_recent = pop @more_recent;
-		    $DEBUG and print "more recent file: $more_recent\n";
-  system("find @sys_files -cnewer $save_path/$more_recent \! -type d -print > $save_path/list_incr_sys$the_time.txt");
-		    if (!cat_("$save_path/list_incr_sys$the_time.txt")) {
-			system("rm $save_path/list_incr_sys$the_time.txt");
-		    } else {
-  system("$tar_cmd_sys -f $save_path/backup_incr_sys$the_time.$tar_ext -T $save_path/list_incr_sys$the_time.txt");
-  push @file_list_to_send_by_ftp, "$save_path/backup_incr_sys$the_time.$tar_ext";
-  push @file_list_to_send_by_ftp, "$save_path/list_incr_sys$the_time.txt";
-  $results .= "\nfile: $save_path/backup_incr_sys$the_time.$tar_ext\n";
-  $results .= cat_("$save_path/list_incr_sys$the_time.txt");
-		    }
-		   }
-		else { 
-  system("$tar_cmd_sys -f $save_path/backup_base_sys$the_time.$tar_ext @sys_files"); 
-  push @file_list_to_send_by_ftp, "$save_path/backup_base_sys$the_time.$tar_ext";
-  $results .= "\nfile: $save_path/backup_base_sys$the_time.$tar_ext\n";
-		}
-	    }
-	    else {
-#  system("cd $save_path && rm -f backup_sys* backup_base_sys* backup_incr_sys*");
-  system("$tar_cmd_sys -f $save_path/backup_sys$the_time.$tar_ext @sys_files");
-  push @file_list_to_send_by_ftp, "$save_path/backup_sys$the_time.$tar_ext";
-  $results .= "\nfile: $save_path/backup_sys$the_time.$tar_ext\n";
-	    }
-	}
-	
-	$interactive and progress($pbar, 0.5, _("Backup system files..."));
-	$interactive and progress($pbar3, 0.3, _("Hard Disk Backup files..."));
-
-	if (@list_other) {
-  system("cd $save_path && rm -f backup_other* ");
-  system("$tar_cmd_other -f $save_path/backup_other$the_time.$tar_ext @list_other");
-  push @file_list_to_send_by_ftp, "$save_path/backup_other$the_time.$tar_ext";
-  $results .= "\nfile: $save_path/backup_other$the_time.$tar_ext\n";
-#old	    foreach (@list_other) { push @list_other_, $_ . "\n"; }
-	    @list_other_ = map { "$_\n" } @list_other;
-	    output_p( $save_path . '/list_other', @list_other_);    
-	}
-	
-	$interactive and progress($pbar1, 1, _("Backup User files..."));
-	$interactive and progress($pbar3, 0.3, _("Hard Disk Backup Progress..."));
-	
-	if ($backup_user) {
-	    foreach (@user_list) {
-		my $user = $_;
-		$path_name = return_path($user);
-		if ($backup_user_versions) {
-		    if (grep(/^backup\_incr\_user\_$user\_/, @dir_content)) { 
-			my @more_recent = grep /^backup\_incr\_user\_$user\_/, sort @dir_content; 
-			$more_recent = pop @more_recent;
-			$DEBUG and print "more recent file: $more_recent\n";
- system("find $path_name -cnewer $save_path/$more_recent \! -type d -print > $save_path/list_incr_user_$user$the_time.txt");
-			if (!cat_("$save_path/list_incr_user_$user$the_time.txt")) {
-			    system("rm $save_path/list_incr_user_$user$the_time.txt");
-			} else {
- system("$tar_cmd_user -f $save_path/backup_incr_user_$user$the_time.$tar_ext -T $save_path/list_incr_user_$user$the_time.txt");
- push @file_list_to_send_by_ftp, "$save_path/backup_incr_user_$user$the_time.$tar_ext";
- push @file_list_to_send_by_ftp, "$save_path/list_incr_user_$user$the_time.txt";
- $results .= " \nfile: $save_path/backup_incr_user_$user$the_time.$tar_ext\n";
- $results .= cat_("$save_path/list_incr_user_$user$the_time.txt");
-			}
-		    }
-		    elsif (grep /^backup\_base\_user\_$user\_/, @dir_content) { 
-			my @more_recent = grep /^backup\_base\_user\_$user\_/, sort @dir_content; 
-			$more_recent = pop @more_recent;			
-			$DEBUG and print "more recent file: $more_recent\n";
- system("find $path_name -cnewer $save_path/$more_recent \! -type d -print > $save_path/list_incr_user_$user$the_time.txt");
-			if (!cat_("$save_path/list_incr_user_$user$the_time.txt")) {
-			    system("rm $save_path/list_incr_user_$user$the_time.txt");
-			} else {
- system("$tar_cmd_user -f $save_path/backup_incr_user_$user$the_time.$tar_ext -T $save_path/list_incr_user_$user$the_time.txt");
- push @file_list_to_send_by_ftp, "$save_path/backup_incr_user_$user$the_time.$tar_ext";
- push @file_list_to_send_by_ftp, "$save_path/list_incr_user_$user$the_time.txt";
- $results .= "\nfile: $save_path/backup_incr_user_$user$the_time.$tar_ext\n";
- $results .= cat_("$save_path/list_incr_user_$user$the_time.txt");
-			}
-		    }
-		    else {
-			system("$tar_cmd_user -f $save_path/backup_base_user_$user$the_time.$tar_ext $path_name");
-			push @file_list_to_send_by_ftp, "$save_path/backup_base_user_$user$the_time.$tar_ext";
-			$results .= "\nfile: $save_path/backup_base_user_$user$the_time.$tar_ext\n";
-		    }
-		} else {
-		    system("cd $save_path && rm -f backup_user_$_* backup_base_user_$_* backup_incr_user_$_*");
-		    system("$tar_cmd_user -f $save_path/backup_user_$_$the_time.$tar_ext $path_name");
-		    push @file_list_to_send_by_ftp, "$save_path/backup_user_$_$the_time.$tar_ext";
-		    $results .= "\nfile: $save_path/backup_user_$user$the_time.$tar_ext\n";
-		}
-	    }
-	}
-	$interactive and progress($pbar2, 1, _("Backup Other files..."));
-	$interactive and progress($pbar3, 0.4, _("Hard Disk Backup files..."));
-    }
-
-    if (($where_net_ssh && !$daemon) || ($daemon && $ssh_daemon)) {
-	#ssh_client();
-    }
-    if (($where_net_ftp && !$daemon) || ($daemon && $ftp_daemon)) {
-	$results .= _("file list send by FTP : %s\n ", $_)  foreach @file_list_to_send_by_ftp;
-	$interactive and build_backup_ftp_status();
-	if (ftp_client()) { 
-	    $results .= _("\n FTP connexion problem: It was not possible to send your backup files by FTP.\n");
-	    $interactive and client_ftp_pb();
-	} 
-    }
-    if (($where_cd && !$daemon) || ($daemon && $cd_daemon)) {
-	build_cd();
-    }
-    if ($send_mail) { 
-	if (send_mail("$results")) { 
-	    $interactive and send_mail_pb();
-	    $interactive or print _(" Error during mail sending. \n");
-	} 
-    }
-}
-
-
-my @list_of_rpm_to_install;
-sub require_rpm {
-    my $all_rpms_found = 1;
-    my $res;
-    my @file_cache =  cat_("/var/log/rpmpkgs");
-    @list_of_rpm_to_install = ();
-#    my($pkg) = @_;
-    foreach my $pkg (@_) {
-	$res = grep /$pkg/, @file_cache;
-#	$res = system("rpm -qa | grep $_");
-	if ($res == 0) { $all_rpms_found = 0; push @list_of_rpm_to_install, $pkg;}
-    }
-    return($all_rpms_found);
-}
-
-sub list_remove {
-    my($widget, $list) = @_;
-    my @to_remove;
-    push @to_remove, $list->child_position($_) foreach($list->selection);
-    splice @list_other, $_, 1 foreach(reverse sort @to_remove);
-    $list->remove_items($list->selection);
-}
-
-sub file_ok_sel { 
-    my ( $widget, $file_selection ) = @_;     
-    my $file_name = $file_selection->get_filename();
-    if(!member($file_name, @list_other)) {
-	push(@list_other, $file_name);
-	$list_other->add(gtkshow(new Gtk::ListItem($file_name)));
-    }
-}
-
-sub filedialog_where_hd {
-    my $file_dialog;
-
-    $file_dialog = gtksignal_connect(new Gtk::FileSelection(_("File Selection")), destroy => sub { $file_dialog->destroy(); } );
-    $file_dialog->ok_button->signal_connect(clicked => sub { 
-	$save_path_entry->set_text($file_dialog->get_filename()); 
-	$file_dialog->destroy() });
-    $file_dialog->cancel_button->signal_connect(clicked => sub { $file_dialog->destroy() });
-    $file_dialog->show();
-}
-
-sub filedialog_restore_find_path {
-    my $file_dialog;
-
-    $file_dialog = gtksignal_connect(new Gtk::FileSelection(_("File Selection")), destroy => sub { $file_dialog->destroy(); } );
-    $file_dialog->ok_button->signal_connect(clicked => sub { 
-	$restore_find_path_entry->set_text($file_dialog->get_filename()); 
-	$file_dialog->destroy() });
-    $file_dialog->cancel_button->signal_connect(clicked => sub { $file_dialog->destroy() });
-    $file_dialog->show();
-}
-
-sub filedialog {
-    my $file_dialog;
-
-    $file_dialog = gtksignal_connect(new Gtk::FileSelection(_("File Selection")), destroy => sub { $file_dialog->destroy(); } );
-    $file_dialog->ok_button->signal_connect(clicked => \&file_ok_sel, $file_dialog);
-    $file_dialog->ok_button->child->set(_("Add"));
-    $file_dialog->cancel_button->signal_connect(clicked => sub { $file_dialog->destroy() });
-    $file_dialog->cancel_button->child->set(_("Close"));
-    $file_dialog->set_filename(_("Select the files or directories and click on 'Add'"));
-    $file_dialog->show();
-}
-
-################################################  ADVANCED  ################################################  
-
-sub check_list {
-    foreach (@_) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { invbool $ref })
-	}
-}
-
-sub fonction_env {
-    ($central_widget, $current_widget, $previous_widget, $custom_help, $next_widget) = @_;
-}
-
-# sub redraw_during_check {
-#     my ($tmp1, $tmp2) = @_;
-#     gtksignal_connect(gtkset_active($tmp1, $tmp2), toggled => sub { 
-# #	invbool \$tmp2;
-# 	print "tmp2 bef = $tmp2\n";
-# 	$tmp2 = $tmp2 ? 0 : 1;
-# 	${$central_widget}->destroy();
-# 	print "tmp2 after = $tmp2\n";
-# 	$current_widget->();
-# 	return ($tmp2);
-#     });
-# }
-
-sub advanced_what_sys {
-    my $box_what_sys;
-    
-    gtkpack($advanced_box,
-	    $box_what_sys =  gtkpack_(new Gtk::VBox(0, 15),
-		     1, _("\nPlease check all options that you need.\n"),
-		     1, _("These options can backup and restore all files in your /etc directory.\n"),
-		     0, my $check_what_sys = new Gtk::CheckButton( _("Backup your System files. ( /etc directory )")),
-		     0, my $check_what_versions = new Gtk::CheckButton( _("Use incremental backup  (do not replace old backups)") ),
-		     0, my $check_what_critical = new Gtk::CheckButton( _("Do not include critical files (passwd, group, fstab)") ),
-		     0, _("With this option you will be able to restore any version\n of your /etc directory."),
-		     1, new Gtk::VBox(0, 15),
-		     ),
-	    );
-    check_list([$check_what_sys, \$backup_sys], [$check_what_critical, \$no_critical_sys], [$check_what_versions, \$backup_sys_versions]);
-    fonction_env(\$box_what_sys, \&advanced_what_sys, \&advanced_what, "what");
-    $up_box->show_all();
-}
-
-sub advanced_what_user {
-    my ($previous_function) = @_,
-    my $box_what_user;
-    my %check_what_user;
-    
-    all_user_list();
-    gtkpack($advanced_box,
-	    $box_what_user = gtkpack_(new Gtk::VBox(0, 15),
-				      0, _("Please check all users that you want to include in your backup."),
-				      0, new Gtk::HSeparator,
-				      1, createScrolledWindow( 
-						gtkpack__(new Gtk::VBox(0,0),
-							map { my $name = $_;
-							      my @user_list_tmp;
-							      my $b = new Gtk::CheckButton($name); 
-							      if (grep /^$name$/, @user_list) {
-								  $check_what_user{$_}[1] = 1;
-								  gtkset_active($b, 1);
-							      } else {
-								  $check_what_user{$_}[1] = 0;
-								  gtkset_active($b, 0);
-							      }
-							      $b->signal_connect(toggled => sub { 
-								  if ($check_what_user{$name}[1] ) {
-								      $check_what_user{$name}[1] = 0;
-								      @user_list_tmp = grep(!/^$name$/, @user_list);
-								      @user_list = @user_list_tmp;
-								  } else { 
-								      $check_what_user{$name}[1] = 1;
-								      if (!member($name, @user_list) ) {push @user_list, $name;}
-								  }
-							      });
-							      $b } (@all_user_list) 
-							),
-							       ),
-				      0, my $check_what_browser = new Gtk::CheckButton( _("Do not include the browser cache") ),
-	    0, my $check_what_user_versions = new Gtk::CheckButton( _("Use Incremental Backups  (do not replace old backups)") ),
-				      ),
-	    );
-    check_list([$check_what_browser, \$what_no_browser], [$check_what_user_versions, \$backup_user_versions]);
-    if ($previous_function) { fonction_env(\$box_what_user, \&advanced_what_user, \&$previous_function, "what", \&$previous_function);}
-    else { fonction_env(\$box_what_user, \&advanced_what_user, \&advanced_what, "what");}
-    $up_box->show_all();
-}
-
-sub advanced_what_other {
-    my $box_what_other;
-    $list_other = new Gtk::List();
-    $list_other->set_selection_mode(-extended);
-    $list_other->add(gtkshow(new Gtk::ListItem($_))) foreach (@list_other);
-    
-    gtkpack($advanced_box,
-	    $box_what_other = gtkpack_(new Gtk::VBox(0, 15),
-		     1, gtkpack_(new Gtk::HBox(0,4),
-				 1, createScrolledWindow($list_other),
-				 ),
-		     0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-			       gtksignal_connect(new Gtk::Button(_("Add")), clicked => sub {filedialog()  }),
-			       gtksignal_connect(new Gtk::Button(_("Remove Selected")), clicked => \&list_remove, $list_other),
-			       ),
-		     0, gtkset_sensitive(my $check_what_other_versions = new Gtk::CheckButton( _("Use Incremental Backups  (do not replace old backups)") ), 0),
-		     ),
-	    );
-    check_list([$check_what_other_versions, \$backup_other_versions]);
-    fonction_env(\$box_what_other, \&advanced_what_other, \&advanced_what, "what");
-    $up_box->show_all();
-}
-
-sub advanced_what_entire_sys{
-    my $box_what;
-    
-    my ($pix_user_map, $pix_user_mask) = gtkcreate_png("user");
-    my ($pix_other_map, $pix_other_mask) = gtkcreate_png("net_u");
-    my ($pix_sys_map, $pix_sys_mask) = gtkcreate_png("bootloader");
-
-    gtkpack($advanced_box,
-	    $box_what = gtkpack_(new Gtk::HBox(0, 15),
-		     1, new Gtk::VBox(0, 5),
-		     1, gtkpack_(new Gtk::VBox(0, 15),	
-				 1, new Gtk::VBox(0, 5),
-				 1, gtksignal_connect(my $button_what_other = new Gtk::Button(), 
-						      clicked => sub { ${$central_widget}->destroy(); message_underdevel(); }),
-				 1, gtksignal_connect(my $button_what_all = new Gtk::Button(), 
-						      clicked => sub { ${$central_widget}->destroy(); message_underdevel(); }),
-				 1, new Gtk::VBox(0, 5),
-				 ),
-		     1, new Gtk::VBox(0, 5),	
-		     ),
-	    );
-    $button_what_other->add(gtkpack(new Gtk::HBox(0,10),
-				    new Gtk::Pixmap($pix_sys_map, $pix_sys_mask),
-				    new Gtk::Label(_("Linux")),
-				    new Gtk::HBox(0, 5)
-				    ));
-    $button_what_all->add(gtkpack(new Gtk::HBox(0,10),
-				  new Gtk::Pixmap($pix_user_map, $pix_user_mask),
-				   new Gtk::Label(_("Windows (FAT32)")),
-				  new Gtk::HBox(0, 5)
-				  ));
-    fonction_env(\$box_what, \&advanced_what_entire_sys, \&advanced_what, "");
-    $up_box->show_all();
-}
-
-sub advanced_what{
-    my $box_what;    
-    my ($pix_user_map, $pix_user_mask) = gtkcreate_png("ic82-users-40");
-    my ($pix_other_map, $pix_other_mask) = gtkcreate_png("ic82-others-40");
-    my ($pix_sys_map, $pix_sys_mask) = gtkcreate_png("ic82-system-40");
-    my ($pix_sysp_map, $pix_sysp_mask) = gtkcreate_png("ic82-systemeplus-40");
-
-    gtkpack($advanced_box,
-	    $box_what =  gtkpack_(new Gtk::HBox(0, 15),
-		     1, new Gtk::VBox(0, 5),
-		     1, gtkpack_(new Gtk::VBox(0, 15),	
-				 1, new Gtk::VBox(0, 5),
-				 1, gtksignal_connect(my $button_what_sys = new Gtk::Button(), 
-						      clicked => sub { $box_what->destroy(); advanced_what_sys(); }),
-				 1, gtksignal_connect(my $button_what_user = new Gtk::Button(), 
-						      clicked => sub { ${$central_widget}->destroy(); advanced_what_user();}),
-				 1, gtksignal_connect(my $button_what_other = new Gtk::Button(), 
-						      clicked => sub { ${$central_widget}->destroy(); advanced_what_other(); }),
-#				 1, gtksignal_connect(my $button_what_all = new Gtk::Button(), 
-#						  clicked => sub { ${$central_widget}->destroy(); advanced_what_entire_sys(); }),
-				 1, new Gtk::VBox(0, 5),
-				 ),
-		     1, new Gtk::VBox(0, 5),	
-				 ),
-	    );
-    $button_what_sys->add(  gtkpack(new Gtk::HBox(0,10),
-				    new Gtk::Pixmap($pix_sys_map, $pix_sys_mask),
-				    new Gtk::Label(_("System")),
-				    new Gtk::HBox(0, 5)
-				    ));
-    $button_what_user->add( gtkpack(new Gtk::HBox(0,10),
-				    new Gtk::Pixmap($pix_user_map, $pix_user_mask),
-				    new Gtk::Label(_("Users")),
-				    new Gtk::HBox(0, 5)
-				    ));
-    $button_what_other->add(gtkpack(new Gtk::HBox(0,10),
-				    new Gtk::Pixmap($pix_other_map, $pix_other_mask),
-				    new Gtk::Label(_("Other")),
-				    new Gtk::HBox(0, 5)
-				    ));
-#     $button_what_all->add(gtkpack(new Gtk::HBox(0,10),
-# 				    new Gtk::Pixmap($pix_sysp_map, $pix_sysp_mask),
-# 				    new Gtk::Label(_("An Entire System")),
-# 				    new Gtk::HBox(0, 5)
-# 				    ));
-
-    fonction_env(\$box_what, \&advanced_what, \&advanced_box, "");
-    $up_box->show_all();
-}
-
-
-sub advanced_where_net_ftp {
-    my ($previous_function) = @_,
-    my $box_where_net;
-    
-    gtkpack($advanced_box,
-	    $box_where_net = gtkpack_(new Gtk::VBox(0, 15),
-	 0, new Gtk::HSeparator,
-	 0, my $check_where_net_ftp = new Gtk::CheckButton( _("Use FTP connection to backup") ),
-	 0, new Gtk::HSeparator,
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please enter the host name or IP.")), $where_net_ftp),
-		     1, new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(my $host_name_entry = new Gtk::Entry(), $where_net_ftp),
-		     ),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-	 0, gtkset_sensitive(new Gtk::Label(_("Please enter the directory to\n put the backup on this host.")), $where_net_ftp),
-		     1, new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(my $host_path_entry = new Gtk::Entry(), $where_net_ftp), 
-		     ),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please enter your login")), $where_net_ftp),
-		     1, new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(my $login_user_entry = new Gtk::Entry(), $where_net_ftp),
-		     ),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please enter your password")),  $where_net_ftp),
-		     1, new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(my $passwd_user_entry = new Gtk::Entry(), $where_net_ftp),
-		     ),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-	   1, new Gtk::HBox(0,10),
-	   0, gtkset_sensitive(my $check_remember_pass = new Gtk::CheckButton( _("Remember this password")), $where_net_ftp),
-		     ),
-	 ),
-	    );
-    $passwd_user_entry->set_visibility(0);
-    $passwd_user_entry->set_text( $passwd_user );
-    $passwd_user_entry->signal_connect( 'changed', sub { $passwd_user = $passwd_user_entry->get_text()});
-    $host_path_entry->set_text( $host_path );
-    $host_name_entry->set_text( $host_name );
-    $login_user_entry->set_text( $login_user );
-    $host_name_entry->signal_connect( 'changed', sub { $host_name = $host_name_entry->get_text()});
-    $host_path_entry->signal_connect( 'changed', sub { $host_path = $host_path_entry->get_text()});
-    $login_user_entry->signal_connect( 'changed', sub { $login_user = $login_user_entry->get_text()});
-    check_list ([$check_remember_pass, \$remember_pass]);
-    gtksignal_connect(gtkset_active($check_where_net_ftp, $where_net_ftp), toggled => sub { 
-	invbool \$where_net_ftp;
- 	${$central_widget}->destroy();
- 	$current_widget->();
-    });
-    if ($previous_function) { fonction_env (\$box_where_net, \&advanced_where_net_ftp, \&$previous_function, "ftp" );}
-    else { fonction_env (\$box_where_net, \&advanced_where_net_ftp, \&advanced_where, "ftp" );}
-    $up_box->show_all();
-}
-
-sub advanced_where_net_ssh {
-    my ($previous_function) = @_,
-    my $box_where_ssh;
-    
-    gtkpack($advanced_box,
-	    $box_where_ssh =  gtkpack_(new Gtk::VBox(0, 15),
-	     1, gtkpack(new Gtk::HBox(0, 15),	
-			 new Gtk::VBox(0, 15),
-			 gtkpack_(new Gtk::VBox(0, 15),	
-				     1, new Gtk::VBox(0, 5),
-				     1, gtksignal_connect(new Gtk::Button("rsync"),  clicked => sub {
-					 ${$central_widget}->destroy(); message_underdevel(); }),
-				     1, gtksignal_connect(new Gtk::Button("WebDav"), clicked => sub { 
-					 ${$central_widget}->destroy(); message_underdevel(); }),
-				     1, gtksignal_connect(new Gtk::Button("scp"),   clicked => sub { 
-					 ${$central_widget}->destroy(); message_underdevel(); }),
-				     1, new Gtk::VBox(0, 5),
-				     ),
-			 new Gtk::VBox(0, 15),
-			 ),
-				       ),
-	    );
-# test si x11
-#print system("xterm -fn 7x14 -bg black -fg white -e ssh-keygen -f ~/.ssh/identity-backup && scp") . "\n";
-
-    if ($previous_function) { fonction_env (\$box_where_ssh, \&advanced_where_net_ssh, \&$previous_function, "ssh" );}
-    else { fonction_env (\$box_where_ssh, \&advanced_where_net_ssh, \&advanced_where, "ssh" );}
-    $up_box->show_all();
-}
-
-sub advanced_where_net {
-    my ($previous_function) = @_,
-    my $box_where_net;
-    
-    gtkpack($advanced_box,
-	    $box_where_net = gtkpack_(new Gtk::HBox(0, 15),
-				      1, new Gtk::VBox(0, 5),
-				      1, gtkpack_(new Gtk::VBox(0, 15),	
-						  1, new Gtk::VBox(0, 5),
-						  1, new Gtk::VBox(0,10),
-						  1, gtksignal_connect(new Gtk::Button(_("FTP Connection")), clicked => sub { 
-						      $box_where_net->destroy(); 
-						      if ($previous_function ) {
-							  advanced_where_net_ftp(\&$previous_function);
-						      } else {
-							  advanced_where_net_ftp();
-						      }}),
-						  if_(0, 1, gtksignal_connect(new Gtk::Button(_("Secure Connection")),  clicked => sub {
-						      $box_where_net->destroy(); 
-						      if ($previous_function ) {
-							  advanced_where_net_ssh(\&$previous_function);
-						      } else {
-							  advanced_where_net_ssh();
-						      }})),
-						  1, new Gtk::VBox(0, 5),
-						  1, new Gtk::VBox(0,10),
-						  ),
-				      1, new Gtk::VBox(0, 5),	
-				      ),
-	    );
-    if ($previous_function) { fonction_env (\$box_where_net, \&advanced_where_net, \&$previous_function, "remote" );}
-    else { fonction_env (\$box_where_net, \&advanced_where_net, \&advanced_where, "remote" );}
-    $up_box->show_all();
-}
-
-sub advanced_where_cd {
-    my ($previous_function) = @_,
-    my $box_where_cd;
-    my $combo_where_cd_time = new Gtk::Combo();
-    $combo_where_cd_time->set_popdown_strings ("650","700", "750", "800");    
- 
-    gtkpack($advanced_box,
-	    $box_where_cd = gtkpack_(new Gtk::VBox(0, 6),
-	 0, my $check_where_cd = new Gtk::CheckButton( _("Use CD/DVDROM to backup")),
-	 0, new Gtk::HSeparator,
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please choose your CD space")), $where_cd),
-		     1, new Gtk::VBox(0, 5),
-		     0, gtkset_sensitive(gtkset_usize($combo_where_cd_time, 200, 20), $where_cd),
-		     ),
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please check if you are using CDRW media")), $where_cd),
-		     1, new Gtk::VBox(0, 5),
-		     0, gtkset_sensitive(my $check_cdrw = new Gtk::CheckButton(), $where_cd),
-		     ),
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-	    0, gtkset_sensitive(new Gtk::Label(_("Please check if you want to erase your CDRW before")), $cdrw && $where_cd),
-	    1, new Gtk::VBox(0, 5),
-	    0, gtkset_sensitive(my $check_cdrw_erase = new Gtk::CheckButton(), $cdrw && $where_cd),
-		     ),
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-	   0, gtkset_sensitive(new Gtk::Label(_("Please check if you want to include\n install boot on your CD.")),  $where_cd),
-	   1, new Gtk::VBox(0, 5),
- 	   0, gtkset_sensitive(my $check_cd_with_install_boot = new Gtk::CheckButton(), $where_cd),
-		     ),
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please enter your CD Writer device name\n ex: 0,1,0")),  $where_cd),
-		     1, new Gtk::VBox(0, 5),
-		     0, gtkset_usize(gtkset_sensitive($cd_devive_entry = new Gtk::Entry(), $where_cd), 200, 20),
-		     ),
-	 ),
-	    );
-
-    foreach ([$check_cdrw_erase, \$cdrw_erase], [$check_cd_with_install_boot, \$cd_with_install_boot ]) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; })
-	}
-    gtksignal_connect(gtkset_active($check_where_cd, $where_cd), toggled => sub { 
-	$where_cd = $where_cd ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-    });
-    gtksignal_connect(gtkset_active($check_cdrw, $cdrw), toggled => sub { 
-	$cdrw = $cdrw ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-    });
-    $cd_devive_entry->set_text( $cd_devive );
-    $cd_devive_entry->signal_connect( 'changed', sub { $cd_devive = $cd_devive_entry->get_text(); });
-    $combo_where_cd_time->entry->set_text($cd_time);
-    $combo_where_cd_time->entry->signal_connect( 'changed', sub { $cd_time = $combo_where_cd_time->entry->get_text()});	       
-
-    if ($previous_function) { fonction_env(\$box_where_cd, \&advanced_where_cd, \&$previous_function, ""); }
-    else { fonction_env(\$box_where_cd, \&advanced_where_cd, \&advanced_where, ""); }
-    $up_box->show_all();
-}
-
-sub advanced_where_tape {
-    my ($previous_function) = @_,
-    my $box_where_tape;
-    my $button;
-    my $adj = new Gtk::Adjustment 550.0, 1.0, 10000.0, 1.0, 5.0, 0.0;
-    my ($pix_fs_map, $pix_fs_mask) = gtkcreate_png("filedialog");
-    
-    gtkpack($advanced_box,
-	    $box_where_tape = gtkpack_(new Gtk::VBox(0, 6),
-		 0, new Gtk::HSeparator,
-		 0, my $check_where_tape = new Gtk::CheckButton( _("Use tape to backup") ),
-		 0, new Gtk::HSeparator,
-		 0, gtkpack_(new Gtk::HBox(0,10),
-			     0, gtkset_sensitive(new Gtk::Label(_("Please enter the device name to use for backup")), $where_tape ),
-			     1, new Gtk::VBox(0, 6),
-			     0, gtkset_usize(gtkset_sensitive(my $save_device_tape_entry = new Gtk::Entry(), $where_tape), 200, 20),
-				 ),
-		 0, new Gtk::VBox(0, 6),
-		 0, gtkpack_(new Gtk::HBox(0,10),
-		  0, gtkset_sensitive(new Gtk::Label(_("Please enter the maximum size\n allowed for Drakbackup")), $where_tape),
-		  1, new Gtk::VBox(0, 6),
-		  0, gtkset_usize(gtkset_sensitive(my $spinner = new Gtk::SpinButton( $adj, 0, 0), $where_tape ), 200, 20),
-			     ),
-		     0, gtkpack_(new Gtk::HBox(0,10),
-				 ),
-		 ),
-	    );
-    gtksignal_connect(gtkset_active($check_where_tape, $where_tape), toggled => sub { 
-	$where_tape = $where_tape ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-    });
-    $save_device_tape_entry->set_text( $save_device_tape );
-    $save_device_tape_entry->signal_connect( 'changed', sub { $save_device_tape = $save_device_tape_entry->get_text()});
-    if ($previous_function) { fonction_env(\$box_where_tape, \&advanced_where_tape, \&$previous_function, ""); }
-    else { fonction_env(\$box_where_tape, \&advanced_where_tape, \&advanced_where, ""); }
-    $up_box->show_all();
-}
-
-sub advanced_where_hd {
-    my ($previous_function) = @_,
-    my $box_where_hd;
-    my $button;
-    my $adj = new Gtk::Adjustment 550.0, 1.0, 10000.0, 1.0, 5.0, 0.0;
-    my ($pix_fs_map, $pix_fs_mask) = gtkcreate_png("ic82-dossier-32");
-    
-    gtkpack($advanced_box,
-	    $box_where_hd = gtkpack_(new Gtk::VBox(0, 6),
-	 0, new Gtk::HSeparator,
-#	 0, my $check_where_hd = new Gtk::CheckButton( _("Use Hard Disk to backup") ),
-#	 0, new Gtk::HSeparator,
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please enter the directory to save:")), $where_hd ),
-		     1, new Gtk::VBox(0, 6),
-		     0, gtkset_usize(gtkset_sensitive($save_path_entry = new Gtk::Entry(), $where_hd), 152, 20),
-		     0, gtkset_sensitive($button = gtksignal_connect(new Gtk::Button(),  clicked => sub {
-			 filedialog_where_hd();}), $where_hd ),
-		     ),
-	 0, new Gtk::VBox(0, 6),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-	   0, gtkset_sensitive(new Gtk::Label(_("Please enter the maximum size\n allowed for Drakbackup")),  $where_hd ),
-	   1, new Gtk::VBox(0, 6),
-	   0, gtkset_usize(gtkset_sensitive(my $spinner = new Gtk::SpinButton( $adj, 0, 0), $where_hd ), 200, 20),
-		     ),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     1, new Gtk::VBox(0, 6),
-	   0, gtkset_sensitive(my $check_where_hd_quota = new Gtk::CheckButton( _("Use quota for backup files.")), $where_hd ),
-		     0, new Gtk::VBox(0, 6),
-		     ),
-	 ),
-	    );
-    foreach ([$check_where_hd_quota, \$hd_quota]) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; })
-	}
-#    gtksignal_connect(gtkset_active($check_where_hd, $where_hd), toggled => sub { 
-#	$where_hd = $where_hd ? 0 : 1;
-#	$where_hd = 1;
-#	${$central_widget}->destroy();
-#	$current_widget->();
-#    });
-    $button->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_fs_map, $pix_fs_mask)));
-    $save_path_entry->set_text( $save_path );
-    $save_path_entry->signal_connect( 'changed', sub { $save_path = $save_path_entry->get_text()});
-    if ($previous_function) { fonction_env(\$box_where_hd, \&advanced_where_hd, \&$previous_function, ""); }
-    else { fonction_env(\$box_where_hd, \&advanced_where_hd, \&advanced_where, ""); }
-    $up_box->show_all();
-}
-
-sub advanced_where{
-    my $box_where;
-    my ($pix_net_map, $pix_net_mask) = gtkcreate_png("ic82-network-40");
-    my ($pix_cd_map, $pix_cd_mask) = gtkcreate_png("ic82-CD-40");
-    my ($pix_hd_map, $pix_hd_mask) = gtkcreate_png("ic82-discdurwhat-40");
-    my ($pix_tape_map, $pix_tape_mask) = gtkcreate_png("ic82-tape-40");
-
-    gtkpack($advanced_box,
-	    $box_where = gtkpack_(new Gtk::HBox(0, 15),
-				  1, new Gtk::VBox(0, 5),
-				  1, gtkpack_(new Gtk::VBox(0, 15),	
-					  1, new Gtk::VBox(0, 5),
-					  1, gtksignal_connect(my $button_where_net = new Gtk::Button(), clicked => sub { 
-#					      $box_where->destroy(); advanced_where_net(); }),
-					      $box_where->destroy(); advanced_where_net_ftp(); }),
-#					  1, gtksignal_connect(my $button_where_cd = new Gtk::Button(),  clicked => sub { 
-#					      ${$central_widget}->destroy(); 
-#					      if (require_rpm("mkisofs", "cdrecord", "toto")) { advanced_where_cd(); }
-#					      else { 
-#						  print "have to install @list_of_rpm_to_install...\n";
-#						  ${$central_widget}->destroy();
-#						  install_rpm(\&advanced_where);
-#						  }
-#					  }),
-					  1, gtksignal_connect(my $button_where_hd = new Gtk::Button(),  clicked => sub { 
-					      ${$central_widget}->destroy(); advanced_where_hd(); }),
-#					  1, gtksignal_connect(my $button_where_tape = new Gtk::Button(),  clicked => sub { 
-#					      ${$central_widget}->destroy(); message_underdevel();}), #advanced_where_tape(); }),
-					  1, new Gtk::VBox(0, 5),
-					     ),
-				  1, new Gtk::VBox(0, 5),	
-				  ),
-	    );
-    $button_where_net->add(gtkpack(new Gtk::HBox(0,10),
-				   new Gtk::Pixmap($pix_net_map, $pix_net_mask),
-				   new Gtk::Label(_("Network")),
-				   new Gtk::HBox(0, 5)
-				   ));
-#    $button_where_cd->add(gtkpack(new Gtk::HBox(0,10),
-#				  new Gtk::Pixmap($pix_cd_map, $pix_cd_mask),
-#				  new Gtk::Label(_("CDROM / DVDROM")),
-#				  new Gtk::HBox(0, 5)
-# 				  ));
-    $button_where_hd->add(gtkpack(new Gtk::HBox(0,10),
-				  new Gtk::Pixmap($pix_hd_map, $pix_hd_mask),
-				  new Gtk::Label(_("HardDrive / NFS")),
-				  new Gtk::HBox(0, 5)
-				  ));
-#     $button_where_tape->add(gtkpack(new Gtk::HBox(0,10),
-# 				  new Gtk::Pixmap($pix_tape_map, $pix_tape_mask),
-# 				  new Gtk::Label(_("Tape")),
-# 				  new Gtk::HBox(0, 5)
-# 				  ));
-    fonction_env(\$box_where, \&advanced_where, \&advanced_box, ""); 
-    $up_box->show_all();
-}
-
-sub advanced_when{
-    my $box_when;
-    my $check_where_cd_daemon;
-    my $check_where_hd_daemon;
-    my $check_where_ssh_daemon;
-    my $check_where_ftp_daemon;
-    my ($pix_time_map, $pix_time_mask) = gtkcreate_png("ic82-when-40");
-    my $combo_when_space = new Gtk::Combo();
-    my %trans = (_("hourly") => 'hourly',
-		 _("daily") => 'daily',
-		 _("weekly") => 'weekly',
-		 _("monthly") => 'monthly');
-    my %trans2 = ('hourly' => _("hourly"),
-		  'daily' => _("daily"),
-		  'weekly' => _("weekly"),
-		  'monthly' => _("monthly"));
-    $combo_when_space->set_popdown_strings (_("hourly"),_("daily"),_("weekly"),_("monthly"));    
-
-    gtkpack($advanced_box,
-	    $box_when = gtkpack_(new Gtk::VBox(0, 15),
-	  0, gtkpack_(new Gtk::HBox(0,10),
-		      1, new Gtk::HBox(0,10),
-		      1, new Gtk::Pixmap($pix_time_map, $pix_time_mask),
-		      0, my $check_when_daemon  = new Gtk::CheckButton( _("Use daemon")  ), 
-		      1, new Gtk::HBox(0,10),
-		      ),
-	  0, new Gtk::HSeparator,
-	  0, gtkpack_(new Gtk::HBox(0,10),
-		      0, gtkset_sensitive(new Gtk::Label(_("Please choose the time \ninterval between each backup")),  $backup_daemon),
-		      1, new Gtk::HBox(0,10),
-		      0, gtkset_sensitive($combo_when_space, $backup_daemon),
-		      ),
-	  0, new Gtk::HBox(0,10),
-	  0, gtkpack_(new Gtk::HBox(0,10),
-		   0, gtkset_sensitive(new Gtk::Label(_("Please choose the\nmedia for backup.")), $backup_daemon),
-		   1, new Gtk::HBox(0,10),
-		   0, gtkpack_(new Gtk::VBox(0,10),
-#	   0, gtkset_sensitive($check_where_cd_daemon = new Gtk::CheckButton(_("Use CD/DVDROM with daemon")), $backup_daemon),
-	   0, gtkset_sensitive($check_where_hd_daemon = new Gtk::CheckButton( _("Use Hard Drive with daemon")), $backup_daemon),
-#	   0, gtkset_sensitive($check_where_ssh_daemon = new Gtk::CheckButton( _("Use SSH with daemon")), $backup_daemon),
-	   0, gtkset_sensitive($check_where_ftp_daemon = new Gtk::CheckButton( _("Use FTP with daemon")), $backup_daemon),
-			       ),
-		      ),
-	  0, new Gtk::HSeparator,
-	  1, gtkset_sensitive(new Gtk::Label(_("Please be sure that the cron daemon is included in your services.")),  $backup_daemon),
-	  ),
-	    );
-
-    check_list([$check_where_hd_daemon, \$hd_daemon], [$check_where_ftp_daemon, \$ftp_daemon]);
-#    check_list([$check_where_hd_daemon, \$hd_daemon], [$check_where_ftp_daemon, \$ftp_daemon], 
-#	       [$check_where_cd_daemon, \$cd_daemon],[$check_where_ssh_daemon, \$ssh_daemon] );
-    gtksignal_connect(gtkset_active($check_when_daemon, $backup_daemon), toggled => sub { 
-	$backup_daemon = $backup_daemon ? 0 : 1;
-	${$central_widget}->destroy();
-	advanced_when();
-    });
-    $combo_when_space->entry->set_text( $trans2{$when_space} );
-    $combo_when_space->entry->signal_connect( 'changed', sub { 	$when_space = $trans{$combo_when_space->entry->get_text()}; });
-    fonction_env(\$box_when, \&advanced_when, \&advanced_box, "");
-    $up_box->show_all();
-}
-
-sub advanced_options{
-    my $box_options;
-    my ($pix_options_map, $pix_options_mask) = gtkcreate_png("ic82-moreoption-40");
-    
-    gtkpack($advanced_box,
-	    $box_options = gtkpack_(new Gtk::VBox(0, 15),
-# 				 0, gtkpack_(new Gtk::HBox(0,10),
-# 					     1, new Gtk::VBox(0,10),
-# 					     1, new Gtk::Pixmap($pix_options_map, $pix_options_mask),
-# 					     1, _("Please choose correct options to backup."),
-# 					     1, new Gtk::VBox(0,10),
-# 					     ),
-# 				 0, new Gtk::HSeparator,
-# 				 0, gtkpack_(new Gtk::VBox(0,10),
-# 					     0, gtkset_sensitive(my $check_tar_bz2  = new Gtk::CheckButton( _("Use Tar and bzip2 (very slow) [Please be careful if you\n (un)select this option, as all your old backups will be deleted.]") ), 0),
-# 			 0, gtkset_sensitive(my $check_backupignore = new Gtk::CheckButton( _("Use .backupignore files")), 0),
-				    0, new Gtk::VBox(0,10),
-				    0, gtkpack_(new Gtk::HBox(0,10),
-						0, my $check_mail = new Gtk::CheckButton( _("Send mail report after each backup to :")),
-						1, new Gtk::HBox(0,10),
-						0, my $mail_entry = new Gtk::Entry(),
-						),
-#					     ),
-				    ),
-	    );
-    check_list([$check_mail, \$send_mail]);
-#    check_list([$check_mail, \$send_mail], [$check_tar_bz2, \$comp_mode], [$check_backupignore, \$backupignore]);
-    $mail_entry->set_text( $user_mail );
-    $mail_entry->signal_connect( 'changed', sub { $user_mail = $mail_entry->get_text()});
-    fonction_env(\$box_options, \&advanced_options, \&advanced_box, "options");
-    $up_box->show_all();
-}
-
-sub advanced_box{
-    my $box_adv;
-    my ($pix_hd_map, $pix_hd_mask) = gtkcreate_png("ic82-discdurwhat-40");
-    my ($pix_time_map, $pix_time_mask) = gtkcreate_png("ic82-when-40");
-    my ($pix_net_map, $pix_net_mask) = gtkcreate_png("ic82-where-40");
-    my ($pix_options_map, $pix_options_mask) = gtkcreate_png("ic82-moreoption-40");
-
-    gtkpack($advanced_box,
-	    $box_adv = gtkpack_(new Gtk::HBox(0, 15),
-				    1, new Gtk::VBox(0, 5),	
-				    1, gtkpack_(new Gtk::VBox(0, 15),	
-						1, new Gtk::VBox(0, 5),	
-						1, gtksignal_connect(my $button_what = new Gtk::Button(), clicked => sub { 
-						    ${$central_widget}->destroy(); advanced_what(); }),
-						1, gtksignal_connect(my $button_where = new Gtk::Button(), clicked => sub { 
-						    ${$central_widget}->destroy();  advanced_where(); }),
-						1, gtksignal_connect(my $button_when = new Gtk::Button(), clicked => sub { 
-						    ${$central_widget}->destroy();  advanced_when(); }),
-						1, gtksignal_connect(my $button_options = new Gtk::Button(), clicked => sub {
-						    ${$central_widget}->destroy(); advanced_options();}),
-						1, new Gtk::VBox(0, 5),	
-						),
-				    1, new Gtk::VBox(0, 5),	
-				    ),
-	    );
-    $button_what->add(gtkpack(new Gtk::HBox(0,10),
-			      new Gtk::Pixmap($pix_hd_map, $pix_hd_mask),
-			      new Gtk::Label(_("What")),
-			      new Gtk::HBox(0, 5)
-			      ));
-    $button_where->add(gtkpack(new Gtk::HBox(0,10),
-			      new Gtk::Pixmap($pix_net_map, $pix_net_mask),
-			      new Gtk::Label(_("Where")),
-			      new Gtk::HBox(0, 5)
-			      ));
-    $button_when->add(gtkpack(new Gtk::HBox(0,10),
-			      new Gtk::Pixmap($pix_time_map, $pix_time_mask),
-			      new Gtk::Label(_("When")),
-			      new Gtk::HBox(0, 5)
-			      ));
-    $button_options->add(gtkpack(new Gtk::HBox(0,10),
-			      new Gtk::Pixmap($pix_options_map, $pix_options_mask),
-			      new Gtk::Label(_("More Options")),
-			      new Gtk::HBox(0, 5)
-			      ));
-    fonction_env(\$box_adv, \&advanced_box, \&interactive_mode_box, "");
-    $up_box->show_all();
-}
-
-################################################  WIZARD  ################################################  
-
-sub wizard_step3 {
-    my $box2;    
-    my $text = new Gtk::Text(undef, undef);
-    system_state();
-    gtktext_insert($text, $system_state);
-    button_box_restore_main();
-
-    gtkpack($advanced_box,
-	    $box2 =  gtkpack_(new Gtk::HBox(0, 15),	
-			      1, gtkpack_(new Gtk::VBox(0,10),
-					  0, _("Drakbackup Configuration"),
-					  1, createScrolledWindow($text),
-					  ),
-			      ),
-	    );
-    fonction_env(\$box2, \&wizard_step3, \&wizard_step2, "");
-    button_box_wizard_end();
-    $up_box->show_all();
-}
-
-sub wizard_step2 {
-    my $box2;    
-    
-    gtkpack($advanced_box,
-	    $box2 =  gtkpack_(new Gtk::HBox(0, 15),	
-			      1, new Gtk::VBox(0, 5),	
-			      1, gtkpack_(new Gtk::VBox(0, 15),	
-					  1, new Gtk::VBox(0, 5),
-					  0, _("Please choose where you want to backup"),
-					  0, gtkpack_(new Gtk::HBox(0, 15),	      
-						      0, my $check_wizard_hd = new Gtk::CheckButton(_("on Hard Drive")),
-						      1, new Gtk::VBox(0, 5),
-						      0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Configure")),
-											    clicked => sub {
-												${$central_widget}->destroy();
-												to_ok();
-												advanced_where_hd(\&wizard_step2);
-												to_normal();
-											    }), $where_hd ),
-									  ),
-					  0, gtkpack_(new Gtk::HBox(0, 15),	      
-						      0, my $check_wizard_net = new Gtk::CheckButton(_("across Network")),
-						      1, new Gtk::VBox(0, 5),
-						      0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Configure")),
-											    clicked => sub {
-												${$central_widget}->destroy();
-												to_ok();
-												advanced_where_net(\&wizard_step2);
-												to_normal();
-											    }), $where_net ),
-						      ),
-# 					  0, gtkpack_(new Gtk::HBox(0, 15),	      
-# 						      0, my $check_wizard_cd = new Gtk::CheckButton(_("on CDROM")),
-# 						      1, new Gtk::VBox(0, 5),	
-# 						      0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Configure")),
-# 											    clicked => sub {
-# 												${$central_widget}->destroy();
-# 												advanced_where_cd(\&wizard_step2);
-# 											    }), $where_cd ),
-# 						      ),
-# 					  0, gtkpack_(new Gtk::HBox(0, 15),	      
-# 						      0, my $check_wizard_tape = new Gtk::CheckButton(_("on Tape Device")),
-# 						      1, new Gtk::VBox(0, 5),
-# 						      0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Configure")), 
-# 											    clicked => sub {
-# 												${$central_widget}->destroy();
-# 												advanced_where_tape(\&wizard_step2);
-# 											    }), $where_tape),
-# 						      ),
-					  1, new Gtk::VBox(0, 5),
-					  ),
-			      1, new Gtk::VBox(0, 5),	
-			      ),
-	    );
-    $where_net = $where_net_ssh || $where_net_ftp;
-    foreach ([$check_wizard_hd, \$where_hd], 
-#	     [$check_wizard_cd, \$where_cd], 
-#	     [$check_wizard_tape, \$where_tape],
-	     [$check_wizard_net, \$where_net]) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => 
-			  sub { ${$ref} = ${$ref} ? 0 : 1;
-				$where_hd = 1;
-				if (!$where_hd && !$where_cd && !$where_net) {  $next_widget = \&message_noselect_box; }
-				else { $next_widget = \&wizard_step3;   }
-				if(!$where_net) {$where_net_ssh = 0; $where_net_ftp = 0; }
-				else {$where_net_ftp = 1;}
-				${$central_widget}->destroy();
-				wizard_step2();
-			    })
-	}
-    if (!$where_hd && !$where_cd && !$where_net) { fonction_env(\$box2, \&wizard_step2, \&wizard, "", \&message_noselect_box)}
-    else { fonction_env(\$box2, \&wizard_step2, \&wizard, "", \&wizard_step3)}
-    button_box_wizard();
-    $up_box->show_all();
-}
-
-sub wizard   {
-    my $box2;    
-    
-    gtkpack($advanced_box,
-	    $box2 =  gtkpack_(new Gtk::HBox(0, 15),	
-			      1, new Gtk::VBox(0, 5),	
-			      1, gtkpack_(new Gtk::VBox(0, 15),	
-					  1, new Gtk::VBox(0, 5),
-					  0, _("Please choose what you want to backup"),
-					  0, my $check_wizard_sys = new Gtk::CheckButton(_("Backup system")),
-					  0, my $check_wizard_user = new Gtk::CheckButton(_("Backup Users")),
-					  0, gtkpack_(new Gtk::HBox(0, 15),
-					       1, new Gtk::VBox(0, 5),	
-					       0, gtksignal_connect(new Gtk::Button(_("Select user manually")), clicked => sub {
-						   ${$central_widget}->destroy();
-						   advanced_what_user(\&wizard);
-					       }),
-						      ),
-					  1, new Gtk::VBox(0, 5),	
-					  ),
-			      1, new Gtk::VBox(0, 5),	
-			      ),
-	    );
-    foreach ([$check_wizard_sys, \$backup_sys], [$check_wizard_user, \$backup_user]) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => 
-			  sub { ${$ref} = ${$ref} ? 0 : 1;
-				if ($backup_sys || $backup_user && @user_list ) { $next_widget = \&wizard_step2; } 
-				else { $next_widget = \&message_noselect_what_box; }
-			    })}
-    if ($backup_sys || $backup_user && @user_list ) { fonction_env(\$box2, \&wizard, \&interactive_mode_box, "", \&wizard_step2) } 
-    else { fonction_env(\$box2, \&wizard, \&interactive_mode_box, "", \&message_noselect_what_box) } 
-    button_box_wizard();
-    $up_box->show_all();
-}
-
-################################################  RESTORE  ################################################  
-
-sub find_backup_to_restore {
-	# fixme: 
-	# faire test existance cd
-	# faire reponse si non existance de  $path_to_find_restore
-    my @list_backup = ();
-    my @list_backup_tmp2 = ();
-    my $to_put;
-    @sys_backuped = ();
-    my @list_backup_tmp;
-    my @user_backuped_tmp;
-
-    @user_backuped = ();
-    -d $path_to_find_restore and @list_backup_tmp2 = all($path_to_find_restore);
-    foreach (@list_backup_tmp2) {
-	s/\_base//gi;
-	s/\_incr//gi;
-	push @list_backup , $_;
-    }
-    if (grep /^backup_other/, @list_backup) {$other_backuped = 1;}
-    if (grep /^backup_sys/, @list_backup) {$sys_backuped = 1;}
-    foreach (grep /^backup_sys_/, @list_backup) {
-	chomp;
-	s/^backup_sys_//gi;
-	s/.tar.gz$//gi;
-	s/.tar.bz2$//gi;
- 	my ( $date, $heure) = /^(.*)_([^_]*)$/; 
-	my $year = substr($date, 0, 4);
-	my $month = substr($date, 4,  2);
-	my $day =  substr($date, 6, 2);
-	my $hour = substr($heure, 0,  2);
-	my $min =  substr($heure, 2, 2);
-	$to_put = "$day/$month/$year $hour:$min                   $_";
- 	push @sys_backuped , $to_put;
-    }
-    $restore_step_sys_date  = $to_put;
-    foreach (grep /^backup_user_/, @list_backup) {
-	chomp;
-	s/^backup_user_//gi;
-	s/.tar.gz$//gi;
-	s/.tar.bz2$//gi;
-	my ($nom, $date, $heure) = /^(.*)_([^_]*)_([^_]*)$/;
-	my $year = substr($date, 0, 4);
-	my $month = substr($date, 4,  2);
-	my $day =  substr($date, 6, 2);
-	my $hour = substr($heure, 0,  2);
-	my $min =  substr($heure, 2, 2);
-#	my $to_put = "  $nom,  (date: $date, hour: $heure)";
-	$to_put = "$_       user: $nom,   date: $day/$month/$year,   hour: $hour:$min";
-	push @user_backuped , $to_put;
-	grep ( /^$nom$/, @user_list_backuped) or push @user_list_backuped, $nom;
-    }
-}
-
-sub system_state {
-    $system_state = ();
-
-    if ($cfg_file_exist) { 
-	$system_state .= _("\nBackup Sources: \n");
-        $backup_sys and $system_state .= _("\n- System Files:\n"); 
-        $backup_sys and $system_state .= "\t\t$_\n" foreach @sys_files; 
-        $backup_user and $system_state .= _("\n- User Files:\n");
-        $backup_user and $system_state .= "\t\t$_\n" foreach @user_list;
-        @list_other and $system_state .= _("\n- Other Files:\n"); 
-        @list_other and $system_state .= "\t\t$_\n" foreach @list_other;
-        $where_hd and $system_state .= _("\n- Save on Hard drive on path : %s\n", $save_path);
-	$where_net_ftp and $system_state .= _("\n- Save on FTP on host : %s\n", $host_name);
-	$where_net_ftp and $system_state .= _("\t\t user name: %s\n\t\t on path: %s \n", $login_user, $host_path);
-	$system_state .= _("\n- Options:\n");
-	$backup_sys or $system_state .= _("\tDo not include System Files\n");
-	if ($comp_mode) { $system_state .= _("\tBackups use tar and bzip2\n"); }
-	else { $system_state .= _("\tBackups use tar and gzip\n"); }   
-	$system_state .= _("\n- Daemon (%s) include :\n", $when_space);
-	$hd_daemon and $system_state .= _("\t-Hard drive.\n");    
-	$cd_daemon and $system_state .= _("\t-CDROM.\n");    
-	$ftp_daemon and $system_state .= _("\t-Network by FTP.\n");    
-	$ssh_daemon and $system_state .= _("\t-Network by SSH.\n");    
-    }
-    else {$system_state = _("No configuration, please click Wizard or Advanced.\n")}
-}
-
-sub restore_state {
-    my @tmp = split( ' ', $restore_step_sys_date);
-    $restore_state = _("List of data to restore:\n\n");
-    if ($restore_sys) { $restore_state .= "- Restore System Files.\n";
-			$restore_state .= "   - from date: $tmp[0] $tmp[1]\n";
-			}
-    if ($restore_user) { 
-	$restore_state .= "- Restore User Files: \n" ;
-	$restore_state .= "\t\t$_\n" foreach @user_list_to_restore2 ;
-	push @user_list_to_restore, (split(',', $_))[0] foreach @user_list_to_restore2 ;
-    }
-    if ($restore_other) { 
-	$restore_state .= "- Restore Other Files: \n";
-	-f "$path_to_find_restore/list_other" and $restore_state .= "\t\t$_\n" foreach split( "\n", cat_("$path_to_find_restore/list_other"));  
-    }
-    if ($restore_other_path) {
-	$restore_state .= "- Path to Restore: $restore_path \n";
-    }
-}
-
-sub select_most_recent_selected_of {
-    my ($user_name) = @_;
-    my @list_tmp2;
-    my @tmp = sort @user_list_to_restore2;
-    foreach (grep /$user_name\_/, sort @tmp) { push @list_tmp2 , $_; }
-    return pop @list_tmp2;
-}
-
-sub select_user_data_to_restore {
-    my $var_eq = 1;
-    my @list_backup = ();
-    my @list_tmp = ();
-    my @list_tmp2 = ();
-    @user_list_to_restore = ();
-
-    -d $path_to_find_restore and my @list_backup_tmp2 = grep /^backup/, all($path_to_find_restore);
-    @list_tmp2 = @list_backup_tmp2;
-    foreach (@list_backup_tmp2) {
-	s/\_base//gi;
-	s/\_incr//gi;
-	push @list_backup , $_;
-    }
-    foreach my $var_tmp (@user_list_backuped) {
-	$var_eq = 1;
-	my $more_recent = (split( ' ', select_most_recent_selected_of($var_tmp)))[0]; 
-	foreach (grep /^backup\_user\_$var_tmp\_/, sort @list_backup) {
-	    s/.tar.gz//gi;
-	    s/.tar.bz2//gi;	    
-	    if ($more_recent) {
-		if ( $_ =~ /$more_recent/ ) {
-		    push @list_tmp , $_;
-		    $var_eq = 0;    
-		}
-		else { $var_eq and push @list_tmp , $_;}
-	    }
-	}
-    }
-     foreach my $var_to_restore (@list_tmp) {
-	$var_to_restore =~ s/backup_//gi;
-	foreach my $var_exist ( sort @list_tmp2) {
-	    if ($var_exist =~ /$var_to_restore/ ) {
-		push @user_list_to_restore, $var_exist;
-	    }
-	}
-    }
-    $DEBUG and print "(incremental restore) real user list to restore :  $_ \n" foreach (@user_list_to_restore);
-}
-
-sub select_sys_data_to_restore {
-    my $var_eq = 1;
-    my @list_tmp = ();
-    @sys_list_to_restore = ();
-
-    -d $path_to_find_restore and @list_tmp = grep /^backup/, all($path_to_find_restore);
-    my @more_recent = split( ' ', $restore_step_sys_date); 
-    my $more_recent = pop @more_recent;
-    foreach my $var_exist (grep /\_sys\_/, sort @list_tmp) {
-	if ($var_exist =~ /$more_recent/ ) {
-	    push @sys_list_to_restore, $var_exist;
-	    $var_eq = 0; }
-	 else {  $var_eq and push @sys_list_to_restore, $var_exist; }
-    }
-    $DEBUG and print "sys list to restore: $_\n " foreach (@sys_list_to_restore);
-}
-
-sub valid_backup_test {
-    my (@files_list) = @_;
-    @files_corrupted = ();
-    my $is_corrupted = 0;
-    foreach (@files_list) {
-	if (system("gzip -l $path_to_find_restore/$_") > 1 ) {
-	    push @files_corrupted, $_;
-	    $is_corrupted = -1;
-	}
-    }
-    return $is_corrupted;
-}
-
-sub restore_aff_backup_problems {
-    my $do_restore;
-    my $button_restore;
-    my $text = new Gtk::Text(undef, undef);
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-    my $restore_pbs_state = _("List of data corrupted:\n\n");
-    $restore_pbs_state .= "\t\t$_\n" foreach @files_corrupted ;
-    $restore_pbs_state .= _("Please uncheck or remove it on next time.");
-    gtktext_insert($text, $restore_pbs_state);
-    button_box_restore_main();    
-
-    gtkpack($advanced_box,
-	    $do_restore = gtkpack_(new Gtk::VBox(0,10),
-				   0, new Gtk::VBox(0,10),
-				   1, gtkpack_(new Gtk::HBox(0, 15),	
-					      1, new Gtk::VBox(0, 5),	
-					      0, new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-					      0, _("Backup files are corrupted"),
-					      1, new Gtk::VBox(0, 5),	
-					  ),
-				   0, new Gtk::VBox(0,10),
-				   1, createScrolledWindow($text),
-				   ),
-	    );
-    button_box_restore_pbs_end();
-    fonction_env(\$do_restore, \&restore_aff_backup_problems, "", "restore_pbs");
-    $up_box->show_all();
-}
-
-sub restore_aff_result {
-    my $do_restore;
-    my $text = new Gtk::Text(undef, undef);
-    gtktext_insert($text, $restore_state);
-    button_box_restore_main();
-    
-    gtkpack($advanced_box,
-	    $do_restore = gtkpack_(new Gtk::VBox(0,10),
-				   1, new Gtk::VBox(0,10),
-				   0, _("          All your selectionned data have been          "),
-				   0, _("          Successfuly Restored on %s       ", $restore_path),
-				   1, new Gtk::VBox(0,10),
-				   ),
-	    );
-    button_box_build_backup_end();
-    $central_widget = \$do_restore;
-    $up_box->show_all();
-
-}
-
-sub return_path {
-    my ($username) = @_;
-    my $usr;
-    my $home_dir;
-    my $passwdfile = "/etc/passwd";
-    open (PASSWD, $passwdfile) or exit 1; 
-    while (defined(my $line = <PASSWD>)) {
-	chomp($line);
-	($usr,$home_dir) = (split(/:/, $line))[0,5];
-	last if ($usr eq $username); 
-    }
-    close (PASSWD);
-    return $home_dir;
-}
-
-sub restore_backend {
-    my $untar_cmd;
-    my $exist_problem = 0;
-    my $user_dir;
-    if (grep /tar.gz$/, all($path_to_find_restore)) { $untar_cmd = 0; } 
-    else { $untar_cmd = 1; }
-    if ($restore_user)  { 
-	if ($backup_user_versions) {
-	    select_user_data_to_restore();
-	    if (valid_backup_test(@user_list_to_restore) == -1) {
-		$exist_problem = 1;
-		restore_aff_backup_problems();
-	    } else {
-		foreach (@user_list_to_restore) {
-		    my ($tnom, $username, $theure2) = /^(\w+\_\w+\_user_)(.*)_(\d+\_\d+.*)$/;
-		    $DEBUG and print "user name to restore: $username, user directory: $user_dir\n";		    
-		    if ($remove_user_before_restore) {
-			$user_dir = return_path($username);
-			-d $user_dir and rm_rf($user_dir);
-		    }
-		    $untar_cmd or system(" tar xfz  $path_to_find_restore/$_ -C $restore_path") ;
-		    $untar_cmd and system("/usr/bin/bzip2 -cd $path_to_find_restore/$_ | tar xf -C $restore_path ") ;
-		}
-	    }
-	}
-    }
-    if ($restore_sys)   { 
-	if ($backup_sys_versions) {
-	    select_sys_data_to_restore();
-	    if (valid_backup_test(@sys_list_to_restore) == -1) {
-		$exist_problem = 1;
-		restore_aff_backup_problems();
-	    } else {
- $untar_cmd or system("tar xfz $path_to_find_restore/$_  -C $restore_path ") foreach @sys_list_to_restore;
- $untar_cmd and system("/usr/bin/bzip2 -cd $path_to_find_restore/$_  | tar xf -C $restore_path ") foreach @sys_list_to_restore;
-		}
-	} else {
- $untar_cmd or system("tar xfz $path_to_find_restore/backup_sys.tar.gz  -C $restore_path ");
- $untar_cmd and system("/usr/bin/bzip2 -cd $path_to_find_restore/backup_sys.tar.bz2  | tar xf -C $restore_path ");
-	}	    
-    }
-    if ($restore_other) { 
- $untar_cmd or system("tar xfz $path_to_find_restore/backup_other.tar.gz  -C $restore_path ");
- $untar_cmd and system("/usr/bin/bzip2 -cd $path_to_find_restore/backup_other.tar.bz2  | tar xf -C $restore_path ");
-    }
-    $exist_problem or restore_aff_result();
-}
-
-sub restore_do {
-    if ($backup_bef_restore) {
-	if ($restore_sys) { $backup_sys = 1;}
-	else { $backup_sys = 0;}
-	if ($restore_user) { 
-	    $backup_user = 1;
-	    @user_list = @user_list_to_restore;
-	} else { $backup_user = 0;}
-	build_backup_status();
-	read_conf_file();
-	build_backup_files();
-	$table->destroy();
-    }
-    restore_do2();
-}
-
-sub restore_do2 {
-    my $do_restore;
-    my $button_restore;
-    my $text = new Gtk::Text(undef, undef);
-    restore_state();
-    gtktext_insert($text, $restore_state);
-    button_box_restore_main();
-    
-    gtkpack($advanced_box,
-	    $do_restore = gtkpack_(new Gtk::VBox(0,10),
-				   0, _("         Restore Configuration       "),
-				   1, createScrolledWindow($text),
-				   ),
-	    );
-    button_box_restore_end();
-    fonction_env(\$do_restore, \&restore_do2, \&restore_box, "restore");
-    $up_box->show_all();
-}
-
-sub restore_step_other {
-    my $retore_step_other;
-    my $text = new Gtk::Text(undef, undef);
-    my $other_rest = cat_("$path_to_find_restore/list_other");
-    gtktext_insert($text, $other_rest); 
-    gtkpack($advanced_box,
-	    $retore_step_other = gtkpack_(new Gtk::VBox(0,10),
-					  1, new Gtk::VBox(0,10),
-					  1, createScrolledWindow($text),
-			      0, my $check_restore_other_sure = new Gtk::CheckButton(_("OK to restore the other files.")),
-					  1, new Gtk::VBox(0,10),
-					  ),
-	    );
-    check_list([$check_restore_other_sure, \$restore_other]);
-    fonction_env(\$retore_step_other, \&restore_step_other, \&restore_step2, "restore", \&restore_do);
-    $up_box->show_all();
-}
-
-my %check_user_to_restore;
-sub restore_step_user {
-    my $retore_step_user;
-    my @tmp_list = sort @user_backuped;
-    @user_backuped   = @tmp_list;
-
-    gtkpack($advanced_box,
-	    $retore_step_user = gtkpack_(new Gtk::VBox(0,10),
-		     0, new Gtk::VBox(0,10),
-		     0, _("User list to restore (only the most recent date per user is important)"),
-		     1, createScrolledWindow( gtkpack__(new Gtk::VBox(0,0),
-							map { my $name;
-							      my $var2;
-							      my $name_complet = $_;
-							      $name = (split( ' ',$name_complet))[0];
-							      my @user_list_tmp = ();
-							      
-							      my $b = new Gtk::CheckButton($name_complet); 
-							      if ( grep $name_complet, @user_list_to_restore2)  {
-								  gtkset_active($b, 1);
-								  $check_user_to_restore{$name_complet}[1] = 1;
-							      } else {
-								  gtkset_active($b, 0);
-								  $check_user_to_restore{$name_complet}[1] = 0;
-							      }
-							      $b->signal_connect(toggled => sub { 
-								  if (!$check_user_to_restore{$name_complet}[1] ) {
-								      $check_user_to_restore{$name_complet}[1] = 1;
-								      if (!grep (/$name/, @user_list_to_restore2)) {
-									  push @user_list_to_restore2, $name_complet;}
-								  } else {
-								      $check_user_to_restore{$name_complet}[1] = 0;
-								      foreach (@user_list_to_restore2) {
-									  $var2 =  (split( ' ',$_))[0];
-									  if ($name ne $var2) {
-									      push @user_list_tmp, $_;
-									  }
-								      }
-								      @user_list_to_restore2 = @user_list_tmp;
-								  }
-							      });
-							      $b } (@user_backuped) 
-							),
-					      ),
-					 ),
-	    );
-    if ($restore_other) { fonction_env(\$retore_step_user, \&restore_step_user, "", "restore", \&restore_step_other)}
-    else{ fonction_env(\$retore_step_user, \&restore_step_user, "", "restore", \&restore_do)}
-    $up_box->show_all();
-}
-
-sub restore_step_sys {
-    my $restore_step_sys;
-    my $combo_restore_step_sys = new Gtk::Combo();
-    $combo_restore_step_sys->set_popdown_strings (@sys_backuped);
-
-    gtkpack($advanced_box,
-	    $restore_step_sys = gtkpack_(new Gtk::VBox(0,10),
-					1, new Gtk::VBox(0,10),
-					0, my $check_backup_before = new Gtk::CheckButton(_("Backup the system files before:")),
-					0, gtkpack_(new Gtk::HBox(0,10),
-						    1, _("please choose the date to restore"),
-						    0, $combo_restore_step_sys,
-						    0, new Gtk::HBox(0,10),
-						    ),
-					1, new Gtk::VBox(0,10),
-					),
-	    );
-    $combo_restore_step_sys->entry->signal_connect( 'changed', sub {
-	$restore_step_sys_date = $combo_restore_step_sys->entry->get_text();
-	});
-    $combo_restore_step_sys->entry->set_text($restore_step_sys_date);
-    fonction_env(\$restore_step_sys, \&restore_step_sys, "", "restore",  );
-    if ($restore_user) { fonction_env(\$restore_step_sys, \&restore_step_sys, "", "restore", \&restore_step_user)}
-    elsif ($restore_other){ fonction_env(\$restore_step_sys, \&restore_step_sys, "", "restore", \&restore_step_other)}
-    else{ fonction_env(\$restore_step_sys, \&restore_step_sys, "", "restore", \&restore_do)}
-    $up_box->show_all();
-}
-
-sub restore_other_media_hd {
-    my ($previous_function) = @_,
-    my $box_where_hd;
-    my $button;
-    my $adj = new Gtk::Adjustment 550.0, 1.0, 10000.0, 1.0, 5.0, 0.0;
-    my ($pix_fs_map, $pix_fs_mask) = gtkcreate_png("ic82-dossier-32");
-    
-    gtkpack($advanced_box,
-	    $box_where_hd = gtkpack_(new Gtk::VBox(0, 6),
-	 0, new Gtk::HSeparator,
-	 0, my $check_where_hd = new Gtk::CheckButton( _("Use Hard Disk to backup") ),
-	 0, new Gtk::HSeparator,
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please enter the directory to save:")), $where_hd ),
-		     1, new Gtk::VBox(0, 6),
-		     0, gtkset_usize(gtkset_sensitive($save_path_entry = new Gtk::Entry(), $where_hd), 152, 20),
-		     0, gtkset_sensitive($button = gtksignal_connect(new Gtk::Button(),  clicked => sub {
-			 filedialog_where_hd();}), $where_hd ),
-		     ),
-	 0, new Gtk::VBox(0, 6),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-	    0, gtkset_sensitive(new Gtk::Label(_("Please enter the maximum size\n allowed for Drakbackup")),  $where_hd ),
-	    1, new Gtk::VBox(0, 6),
-	    0, gtkset_usize(gtkset_sensitive(my $spinner = new Gtk::SpinButton( $adj, 0, 0), $where_hd ), 200, 20),
-		     ),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-	    1, new Gtk::VBox(0, 6),
-	    0, gtkset_sensitive(my $check_where_hd_quota = new Gtk::CheckButton( _("Use quota for backup files.")), $where_hd ),
-	    0, new Gtk::VBox(0, 6),
-		     ),
-	 ),
-	    );
-    check_list([$check_where_hd_quota, \$hd_quota]);
-    gtksignal_connect(gtkset_active($check_where_hd, $where_hd), toggled => sub { 
-	$where_hd = $where_hd ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-    });
-    $button->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_fs_map, $pix_fs_mask)));
-    $save_path_entry->set_text( $save_path );
-    $save_path_entry->signal_connect( 'changed', sub { $save_path = $save_path_entry->get_text()});
-    if ($previous_function) { fonction_env( \$box_where_hd, \&advanced_where_hd, \&$previous_function, "")}
-    else { fonction_env( \$box_where_hd, \&advanced_where_hd, \&advanced_where, "")}
-    $up_box->show_all();
-}
-
-sub restore_find_net {
-    my ($previous_function) = @_,
-    my $box_where_net;
-    
-    gtkpack($advanced_box,
-	    $box_where_net = gtkpack_(new Gtk::HBox(0, 15),
-				      1, new Gtk::VBox(0, 5),
-				      1, gtkpack_(new Gtk::VBox(0, 15),	
-						  1, new Gtk::VBox(0, 5),
-						  1, new Gtk::VBox(0,10),
-						  1, gtksignal_connect(new Gtk::Button(_("FTP Connection")), clicked => sub { 
-						      $box_where_net->destroy(); 
-						      if ($previous_function ) {
-							  message_underdevel();
-#							  advanced_where_net_ftp(\&$previous_function);
-						      } else {
-							  advanced_where_net_ftp();
-						      }}),
-						  1, gtksignal_connect(new Gtk::Button(_("Secure Connection")),  clicked => sub {
-						      $box_where_net->destroy(); 
-						      if ($previous_function ) {
-							  advanced_where_net_ssh(\&$previous_function);
-						      } else {
-							  advanced_where_net_ssh();
-						      }}),
-						  1, new Gtk::VBox(0, 5),
-						  1, new Gtk::VBox(0,10),
-						  ),
-				      1, new Gtk::VBox(0, 5),	
-				      ),
-	    );
-    if ($previous_function) { fonction_env( \$box_where_net, \&advanced_where_net, \&$previous_function, "")}
-    else { fonction_env( \$box_where_net, \&advanced_where_net, \&advanced_where, "")}
-    $up_box->show_all();
-}
-
-sub restore_other_media {
-    my $box_find_restore;
-    my $button;
-    my $adj = new Gtk::Adjustment 550.0, 1.0, 10000.0, 1.0, 5.0, 0.0;
-    my ($pix_fs_map, $pix_fs_mask) = gtkcreate_png("ic82-dossier-32");
-    
-    gtkpack($advanced_box,
-	    $box_find_restore = gtkpack_(new Gtk::VBox(0, 6),
-	 0, new Gtk::HSeparator,
-	 0, my $check_other_media_hd = new Gtk::CheckButton( _("Restore from Hard Disk.") ),
-				 0, gtkpack_(new Gtk::HBox(0,10),
-				 0, gtkset_sensitive(new Gtk::Label(_("Please enter the directory where backups are stored")), $other_media_hd ),
-				 1, new Gtk::VBox(0, 6),
-				 0, gtkset_usize(gtkset_sensitive($restore_find_path_entry = new Gtk::Entry(), $other_media_hd), 152, 20),
-				 0, gtkset_sensitive($button = gtksignal_connect(new Gtk::Button(),  clicked => sub {
-				     filedialog_restore_find_path();}), $other_media_hd ),
-					     ),
-					 1, new Gtk::VBox(0, 6),
-#					 0, new Gtk::HSeparator,
-# 					 0, my $check_other_media_net = new Gtk::CheckButton( _("Restore from Network") ),
-# 					 0, new Gtk::VBox(0, 6),
-# 					 1, gtkpack(new Gtk::HBox(0,10),
-# 						    new Gtk::VBox(0, 6),
-# 						    gtkset_sensitive(gtksignal_connect(new Gtk::Button("Network"),  clicked => sub {
-# 							${$central_widget}->destroy();
-# 							restore_find_net(\&restore_other_media);}), !$other_media_hd ),
-# 						    new Gtk::VBox(0, 6),
-# 						    ),
-# 					 1, new Gtk::VBox(0, 6),
-# 					 0, new Gtk::HSeparator,
-					 0, new Gtk::VBox(0, 6),
-					 ),
-	    );
-    gtksignal_connect(gtkset_active($check_other_media_hd, $other_media_hd), toggled => sub { 
-	$other_media_hd = $other_media_hd ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-    });
-#     gtksignal_connect(gtkset_active($check_other_media_net, !$other_media_hd), toggled => sub { 
-# 	$other_media_hd = $other_media_hd ? 0 : 1;
-# 	${$central_widget}->destroy();
-# 	$current_widget->();
-#    });
-    $button->add(gtkpack(new Gtk::HBox(0,10), new Gtk::Pixmap($pix_fs_map, $pix_fs_mask)));
-    $restore_find_path_entry->set_text( $path_to_find_restore );
-    $restore_find_path_entry->signal_connect( 'changed', sub { $path_to_find_restore = $restore_find_path_entry->get_text()});
-    fonction_env(\$box_find_restore, \&restore_other_media, \&restore_step2, "other_media");
-    $up_box->show_all();
-}
-
-sub restore_step2 {
-    my $retore_step2;
-    my $other_exist;
-    my $sys_exist;
-    my $user_exist;
-
-    if (-f "$save_path/backup_other*") { $other_exist = 1; } 
-    else { my $other_exist = 0; $restore_other = 0; }
-    if (grep /\_sys\_/, grep /^backup/, all("$save_path/")) { $sys_exist = 1; } 
-    else { my $sys_exist = 0; $restore_sys = 0; }
-    if (grep /\_user\_/, grep /^backup/, all("$save_path/")) { $user_exist = 1; } 
-    else { my $user_exist = 0; $restore_user = 0; }
-    $backup_sys_versions || $backup_user_versions and $backup_bef_restore = 1;
-
-    gtkpack($advanced_box,
-	    $retore_step2 = gtkpack_(new Gtk::VBox(0,10),
-	 1, new Gtk::VBox(0,10),
-	 1, new Gtk::VBox(0,10),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, my $check_restore_other_src = new Gtk::CheckButton(_("Select another media to restore from")),
-		     1, new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("Other Media")),
-							   clicked => sub {
-							       ${$central_widget}->destroy();
-							       restore_other_media();
-							   }), $restore_other_src ),
-		     ),
-	 0, gtkset_sensitive(my $check_restore_sys = new Gtk::CheckButton(_("Restore system")), $sys_exist),
-	 0, gtkset_sensitive(my $check_restore_user = new Gtk::CheckButton(_("Restore Users")), $user_exist),
-	 0, gtkset_sensitive( my $check_restore_other = new Gtk::CheckButton(_("Restore Other")), $other_exist),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, my $check_restore_other_path = new Gtk::CheckButton(_("select path to restore (instead of / )")),
-		     1, new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(my $restore_path_entry = new Gtk::Entry(), $restore_other_path),
-		     ),
-         0, gtkset_sensitive(my $check_backup_bef_restore = new Gtk::CheckButton(_("Do new backup before restore (only for incremental backups.)")), $backup_sys_versions || $backup_user_versions  ),
-	 0, gtkset_sensitive(my $check_remove_user_dir = new Gtk::CheckButton(_("Remove user directories before restore.")), $sys_exist),
-	 1, new Gtk::VBox(0,10),
-	 ),
-	    );
-    foreach  ([$check_restore_sys, \$restore_sys], 
-	      [$check_backup_bef_restore, \$backup_bef_restore],
-	      [$check_restore_user, \$restore_user],
-	      [$check_remove_user_dir, \$remove_user_before_restore ],
-	      [$check_restore_other, \$restore_other]) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { 
-	    ${$ref} = ${$ref} ? 0 : 1;
-	    if (!$restore_sys && !$restore_user && !$restore_other) { $next_widget = \&message_norestore_box; }
-	    elsif ($restore_sys && $backup_sys_versions) { $next_widget = \&restore_step_sys; }
-	    elsif ($restore_user) { $next_widget = \&restore_step_user;}
-	    elsif ($restore_other){ $next_widget = \&restore_step_other;}
-	    else{ $next_widget = \&restore_do;}
-	})
-	}
-    gtksignal_connect(gtkset_active($check_restore_other_path, $restore_other_path), toggled => sub {
-	$restore_other_path = $restore_other_path ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-    });
-    gtksignal_connect(gtkset_active($check_restore_other_src, $restore_other_src), toggled => sub {
-	$restore_other_src = $restore_other_src ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-    });
-    fonction_env(\$retore_step2, \&restore_step2, \&restore_box, "restore");
-    if (!$restore_sys && !$restore_user && !$restore_other) { $next_widget = \&message_norestore_box; }
-    elsif ($restore_sys && $backup_sys_versions) { $next_widget = \&restore_step_sys; }
-    elsif ($restore_user) { $next_widget = \&restore_step_user;}
-    elsif ($restore_other){ $next_widget = \&restore_step_other;}
-    else{ $next_widget = \&restore_do;}
-    $restore_path_entry->set_text($restore_path); 
-    $restore_path_entry->signal_connect( 'changed', sub { $restore_path = $restore_path_entry->get_text(); });
-    $up_box->show_all();
-}
-
-sub restore_box {
-    my $retore_box;
-    my $retore_box3;
-    my $check_restore_sys;
-    my $check_restore_user;
-    my $check_restore_other;
-    $path_to_find_restore = $save_path;
-    find_backup_to_restore();
-    button_box_restore_main();
-
-    if ($other_backuped || $sys_backuped || @user_backuped) {
-	gtkpack($advanced_box,
-		$retore_box = gtkpack_(new Gtk::HBox(0,1),
-				       1, new Gtk::VBox(0,10),
-				       1, gtkpack_(new Gtk::VBox(0,10),
-						   1, new Gtk::VBox(0,10),
-						   1, new Gtk::VBox(0,10),
-						   1, gtksignal_connect(new Gtk::Button(_("Restore all backups")), 
-						       clicked => sub { $retore_box->destroy();
-									button_box_restore();
-									@user_list_to_restore2 = sort @user_backuped; 
-									$restore_sys = 1;
-									$restore_other = 1;
-									$restore_user = 1;
-									restore_do(); }),
-						   1, gtksignal_connect(new Gtk::Button(_("Custom Restore")), 
-						       clicked => sub { $retore_box->destroy();
-									button_box_restore(); 
-									restore_step2();
-								    }),
-						   1, new Gtk::VBox(0,10),
-						   1, new Gtk::VBox(0,10),
-						   ),
-				       1, new Gtk::HBox(0,10),
-				       ),
-		);
-    } else {
-	gtkpack($advanced_box,
-		$retore_box = gtkpack_(new Gtk::HBox(0,1),
-				       message_norestorefile_box(),
-				       ),
-		),
-     }
-    fonction_env(\$retore_box, \&restore_box, \&interactive_mode_box, "restore");
-    $up_box->show_all();
-}
-
-################################################  BUTTON_BOX  ################################################  
-
-
-
-# sub generic_button_box {
-# # 1-n -  [button name, fonctions associated]
-#     $button_box_tmp->destroy();
-#     gtkpack($button_box,
-# 	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox,				         
-# 				       0, gtksignal_connect(new Gtk::Button($_->[0]), clicked => sub {$_->[1]}) foreach (@_), 
-# 				       } ), );    
-# }
-
-sub button_box_adv {
-    $button_box_tmp->destroy();
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox,
-				       0, gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-					   ${$central_widget}->destroy(); interactive_mode_box();  }),
-				       0, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub { 
-					   ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help );  }),
-				       1, new Gtk::HBox(0, 1),	
-				       0, gtksignal_connect(new Gtk::Button(_("Previous")), clicked => sub { 
-					   ${$central_widget}->destroy(); $previous_widget->(); }),
-				       0, gtksignal_connect(new Gtk::Button(_("Save")), clicked => sub { 
-					   ${$central_widget}->destroy();  save_conf_file(); $previous_widget->(); }),
-				       ),
-	    );
-}
-
-
-# sub button_box_adv {
-#     generic_button_box(["cancel", ${$central_widget}->destroy() ]);
-# }
-
-
-
-sub button_box_restore_main {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(gtkpack_(new Gtk::HButtonBox, 
-					       0, gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-						   ${$central_widget}->destroy(); interactive_mode_box();  }),
-					       0, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub {
-						   ${$central_widget}->destroy(); 
-						   adv_help(\&$current_widget, $custom_help);
-					       }),
-					       1, new Gtk::HBox(0, 1),	
-					       0, gtksignal_connect(new Gtk::Button(_("Previous")), clicked => sub { 
-						   ${$central_widget}->destroy(); interactive_mode_box(); }),
-					       0, gtksignal_connect(new Gtk::Button(_("Ok")), clicked => sub { 
-						   ${$central_widget}->destroy(); interactive_mode_box(); }),
-					       ),
-				       ),
-	    );
-}
-
-sub button_box_backup_end {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox,
-				       0, gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-					   ${$central_widget}->destroy(); interactive_mode_box();  }),
-				       0, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub { 
-					   ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help );  }),
-				       1, new Gtk::HBox(0, 1),	
-				       0, gtksignal_connect(new Gtk::Button(_("Previous")), clicked => sub { 
-					   ${$central_widget}->destroy(); $previous_widget->(); }),
-				       0, gtksignal_connect(new Gtk::Button(_("Build Backup")), clicked => sub { 
-					   ${$central_widget}->destroy();
-					   build_backup_status();
-					   build_backup_files(); 
-				       }),
-				       ),
-	    );
-}
-
-sub button_box_wizard_end {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox,
-				       0, gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-					   ${$central_widget}->destroy(); interactive_mode_box();  }),
-				       0, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub { 
-					   ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help );  }),
-				       1, new Gtk::HBox(0, 1),	
-				       0, gtksignal_connect(new Gtk::Button(_("Previous")), clicked => sub { 
-					   ${$central_widget}->destroy(); $previous_widget->(); }),
-				       0, gtksignal_connect(new Gtk::Button(_("Save")), clicked => sub { 
- 					   ${$central_widget}->destroy();  save_conf_file(); interactive_mode_box(); }),
-				       ),
-	    );
-}
-
-sub button_box_restore_end {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox,
-				       0, gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-					   ${$central_widget}->destroy(); interactive_mode_box();  }),
-				       0, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub { 
-					   ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help );  }),
-				       1, new Gtk::HBox(0, 1),	
-				       0, gtksignal_connect(new Gtk::Button(_("Previous")), clicked => sub { 
-					   ${$central_widget}->destroy(); $previous_widget->(); }),
-				       0, gtksignal_connect(new Gtk::Button(_("Restore")), clicked => sub { 
- 					   ${$central_widget}->destroy(); restore_backend(); }),
-				       ),
-	    );
-}
-
-sub button_box_build_backup_end {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 
-				       1, new Gtk::HBox(0, 5),	
-				       1, new Gtk::HBox(0, 5),	
-				       0, gtksignal_connect(new Gtk::Button(_("Ok")), clicked => sub { 
-					   ${$central_widget}->destroy(); interactive_mode_box();  }),
-
-				       ),
-	    );
-}
-
-sub button_box_restore_pbs_end {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox, 
-				       1, new Gtk::HBox(0, 5),	
-				       1, new Gtk::HBox(0, 5),	
-				       1, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub {
-					   ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help); }),
-				       0, gtksignal_connect(new Gtk::Button(_("Ok")), clicked => sub { 
-					   ${$central_widget}->destroy(); interactive_mode_box();  }),
-
-				       ),
-	    );
-}
-
-sub button_box_build_backup {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox,
-				       1, gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-					   ${$central_widget}->destroy(); interactive_mode_box();  }),
-				       1, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub {
-					   ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help); }),
-				       1, new Gtk::HBox(0, 0),
-				       0, gtksignal_connect(new Gtk::Button(_("Previous")), clicked => sub { 
-					   ${$central_widget}->destroy(); $previous_widget->(); }),
-				       1, gtksignal_connect(new Gtk::Button(_("Next")), clicked => sub {
-					   ${$central_widget}->destroy(); $next_widget->();
-				       }),
-				       ),
-	    );
-}
-
-sub button_box_restore {
-
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox,
-				       1, gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-					   ${$central_widget}->destroy(); interactive_mode_box();  }),
-				       1, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub {
-					   ${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help); }),
-				       1, new Gtk::HBox(0, 0),
-				       0, gtksignal_connect(new Gtk::Button(_("Previous")), clicked => sub { 
-					   ${$central_widget}->destroy(); $previous_widget->(); }),
-				       1, gtksignal_connect(new Gtk::Button(_("Next")), clicked => sub {
-					   ${$central_widget}->destroy(); $next_widget->();
-				       }),
-				       ),
-	    );
-}
-
-sub button_box_wizard {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack_(new Gtk::HButtonBox,
-				       1, gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-								${$central_widget}->destroy(); interactive_mode_box();  }),
-				       1, gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub {
-								${$central_widget}->destroy(); adv_help(\&$current_widget,$custom_help); }),
-				       1, new Gtk::HBox(0, 0),
-				       0, gtksignal_connect(new Gtk::Button($next_widget ? _("Previous") : _("OK")), clicked => sub { 
-								${$central_widget}->destroy();
-								$previous_widget ? $previous_widget->() : $next_widget->();
-							    }),
-				       if_($next_widget, 1, gtksignal_connect(new Gtk::Button(_("Next")), clicked => sub {
-										  ${$central_widget}->destroy();
-										  $next_widget ? $next_widget->() : $previous_widget->();
-									      })),
-				      ),
-	    );
-}
-
-sub button_box_main {
-    $button_box_tmp->destroy();
-
-    gtkpack($button_box,
-	    $button_box_tmp = gtkpack(gtkset_layout(new Gtk::HButtonBox, -start),
-				      gtksignal_connect(new Gtk::Button(_("Close")), clicked => sub {  
-					  Gtk->main_quit() }),
-				      gtksignal_connect(new Gtk::Button(_("Help")), clicked => sub { 
-					  ${$central_widget}->destroy(); adv_help(\&interactive_mode_box,$custom_help) }),
-				      ),
-	    );
-}
-
-################################################  MESSAGES  ################################################  
-
-sub message_norestorefile_box {
-    $box2->destroy();
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-    
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    1, gtkpack(new Gtk::HBox(0, 15),	
-				       new Gtk::VBox(0, 5),	
-				       new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-			     _("Please Build backup before to restore it...\n or verify that your path to save is correct."),
-				       new Gtk::VBox(0, 5),	
-				       ),
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    button_box_restore_main();
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-sub send_mail_pb {
-    $table->destroy();
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-    
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    0, gtkpack_(new Gtk::HBox(0, 15),	
-					0, new Gtk::VBox(0, 5),	
-					0, new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-					0, _("Error durind sendmail
-  your report mail was not sent
-  Please configure sendmail"),
-					),
-			    0, new Gtk::VBox(0, 5),	
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    button_box_restore_main();
-    $custom_help = "mail_pb";
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-
-
-
-sub install_rpm {
-    my ($previous_function) = @_,
-    my $box_what_user;
-    
-    gtkpack($advanced_box,
-	    $box_what_user = gtkpack_(new Gtk::VBox(0, 15),
-				      0, _("Package List to Install"),
-				      0, new Gtk::HSeparator,
-				      0, createScrolledWindow( 
-						gtkpack__(new Gtk::VBox(0,0),
-							map { my $b = new Gtk::Button($_); } (@list_of_rpm_to_install) 
-							  ),), ),
-	    );
-    fonction_env(\$box_what_user, \&install_rpm, \&$previous_function, "what");
-    $up_box->show_all();
-}
-
-
-
-
-
-
-
-
-sub client_ftp_pb {
-    $table->destroy();
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-    
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    0, gtkpack_(new Gtk::HBox(0, 15),	
-					0, new Gtk::VBox(0, 5),	
-					0, new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-					0, _("Error durind sending file via FTP.
- Please correct your FTP configuration."),
-					),
-			    0, new Gtk::VBox(0, 5),	
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    button_box_restore_main();
-    $custom_help = "mail_pb";
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-sub message_norestore_box {
-    $box2->destroy();
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-    
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    1, gtkpack(new Gtk::HBox(0, 15),	
-				       new Gtk::VBox(0, 5),	
-				       new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-				       _("Please select data to restore..."),
-				       new Gtk::VBox(0, 5),	
-				       ),
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    button_box_restore_main();
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-sub message_noselect_box {
-    $box2->destroy();
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-    
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    1, gtkpack(new Gtk::HBox(0, 15),	
-				       new Gtk::VBox(0, 5),	
-				       new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-				       _("Please select media for backup..."),
-				       new Gtk::VBox(0, 5),	
-				       ),
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    $previous_widget = \&wizard_step2;
-    $next_widget = \&wizard_step2;
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-sub message_noselect_what_box {
-    $box2->destroy();
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-    
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    1, gtkpack(new Gtk::HBox(0, 15),	
-				       new Gtk::VBox(0, 5),	
-				       new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-				       _("Please select data to backup..."),
-				       new Gtk::VBox(0, 5),	
-				       ),
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    $previous_widget = \&wizard;
-    $next_widget = \&wizard;
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-sub message_noconf_box {
-    $box2->destroy();
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    1, gtkpack(new Gtk::HBox(0, 15),	
-				       new Gtk::VBox(0, 5),	
-				       new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-				       _("No configuration file found \nplease click Wizard or Advanced."),
-				       new Gtk::VBox(0, 5),	
-				       ),
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    button_box_restore_main();
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-sub message_underdevel {
-    $box2->destroy();
-    my ($pix_warn_map, $pix_warn_mask) = gtkcreate_png('warning');
-
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    1, gtkpack(new Gtk::HBox(0, 15),	
-				       new Gtk::VBox(0, 5),	
-				       new Gtk::Pixmap($pix_warn_map, $pix_warn_mask),
-				       _("Under Devel ... please wait."),
-				       new Gtk::VBox(0, 5),	
-				       ),
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-################################################  BUILD_BACKUP  ################################################  
-
-sub progress {
-    my ($progressbar, $incr, $label_text) = @_;
-    my($new_val) = $progressbar->get_current_percentage;
-    $new_val += $incr;
-    if ($new_val > 1) {$new_val = 1}
-    $progressbar->update($new_val);
-    $progressbar->{label}->set($label_text);
-    Gtk->main_iteration while Gtk->events_pending;
-}
-
-sub find_backup_to_put_on_cd {
-    my @list_backup_tmp;
-    my @data_backuped_tmp;
-    @data_backuped = ();
-    -d $save_path and my @list_backup = all($save_path);
-    foreach (grep /^backup_other/, @list_backup) {
-	$other_backuped = 1;
-	chomp;
-	my $tail  = (split(' ',`du $save_path/$_` ))[0] ;
-	s/^backup_other//gi;
-	s/.tar.gz$//gi;
-	s/.tar.bz2$//gi;
-	my @user_date = split(/\_20/,$_ );
-	my @user_date2 = split(/\_/,$user_date[1] );
-	my $to_put = "  other_data,          (tail: $tail ko, date: 20$user_date2[0], hour: $user_date2[1])";
-	push @data_backuped , $to_put;
-    }
-    foreach (grep /_sys_/, @list_backup) {
-	$sys_backuped = 1;
-	chomp;
-	my $tail  = (split(' ',`du $save_path/$_` ))[0] ;
-	s/^backup_other//gi;
-	s/.tar.gz$//gi;
-	s/.tar.bz2$//gi;
-	my @user_date = split(/\_20/,$_ );
-	my @user_date2 = split(/\_/,$user_date[1] );
-	my $to_put = "  system,          (tail: $tail ko, date: 20$user_date2[0], hour: $user_date2[1])";
-	push @data_backuped , $to_put;
-    }
-    foreach (grep /user_/, @list_backup) {
-	chomp;
-	my $tail  = (split(' ',`du $save_path/$_` ))[0] ;
-	s/^backup_user_//gi;
-	s/.tar.gz$//gi;
-	s/.tar.bz2$//gi;
-	my @user_date = split(/\_20/,$_ );
-	my @user_date2 = split(/\_/,$user_date[1] );
-	my $to_put = "  $user_date[0],          (tail: $tail ko, date: 20$user_date2[0], hour: $user_date2[1])";
-	push @data_backuped , $to_put;
-    }
-}
-
-sub build_backup_status {
-    $pbar =   new Gtk::ProgressBar;
-    $pbar1 =  new Gtk::ProgressBar;
-    $pbar2 =  new Gtk::ProgressBar;
-    $pbar3 =  new Gtk::ProgressBar;
-    button_box_build_backup_end();
-    gtkpack($advanced_box,
-	    $table = create_packtable({ col_spacings => 10, row_spacings => 5},
-   [""], 
-   [""], 
-   [""], 
-   [""], 
-   [""], 
-   [""], 
-   [""], 
-   [""], 
-   [_("Backup system files")],
-   [ $pbar, $pbar->{label} = new Gtk::Label(' ' )],
-   [_("Backup user files") ],
-   [$pbar1,$pbar1->{label} = new Gtk::Label(' ' ) ],
-   [_("Backup other files")],
-   [ $pbar2, $pbar2->{label} = new Gtk::Label(' ' ) ],
-   [_("Total Progress")],
-   [$pbar3,$pbar3->{label} = new Gtk::Label(' ' ) ],
-				      ),
-	    );
-    $custom_help = "options";
-    $central_widget = \$table;
-    $up_box->show_all();
-    Gtk->main_iteration while Gtk->events_pending;
-}
-
-
-sub build_backup_ftp_status {
-    $pbar =   new Gtk::ProgressBar;
-    $pbar3 =  new Gtk::ProgressBar;
-    $table->destroy();
-    button_box_build_backup_end();
-    $pbar->set_value(0);
-    $pbar3->set_value(0);
-
-
-    gtkpack($advanced_box,
-	    $table =  gtkpack_(new Gtk::VBox(0, 15),
-			       1, _("files sending by FTP"),
-			       1, new Gtk::VBox(0, 15),
-			       1, create_packtable({ col_spacings => 10, row_spacings => 5},
-#						    [ $pbar->set_show_text( $show_text );
-						    [_("Sending files...")],
-						    [""], 
-						    [ $pbar->{label} = new Gtk::Label(' ' )],
-						    [ $pbar],
-						    [""], 
-						    [_("Total Progress")],
-						    [ $pbar3->{label} = new Gtk::Label(' ' ) ],
-						    [$pbar3],
-						    ),
-			       1, new Gtk::VBox(0, 15),
-			      ),
-	    );
-    $custom_help = "options";
-    $central_widget = \$table;
-    $up_box->show_all();
-    Gtk->main_iteration while Gtk->events_pending;
-}
-
-
-
-sub build_backup_box_see_conf {
-    my $box2;    
-    my $text = new Gtk::Text(undef, undef);
-    system_state();
-    gtktext_insert($text, $system_state);
-    button_box_restore_main();
-
-    gtkpack($advanced_box,
-	    $box2 =  gtkpack_(new Gtk::HBox(0, 15),	
-			      1, gtkpack_(new Gtk::VBox(0,10),
-					  0, _("Drakbackup Configuration"),
-					  1, createScrolledWindow($text),
-					  ),
-			      ),
-	    );
-    button_box_backup_end();
-    $custom_help = "";
-    $central_widget = \$box2;
-    $current_widget = \&build_backup_box_see_conf;
-    $previous_widget =\&build_backup_box;
-    $up_box->show_all();
-}
-
-sub build_backup_box_progress {
-#    build_backup_files(); 
-}
-
-sub aff_total_tail {
-    my @toto = ();
-    my $total = 0;
-    push @toto, (split (",", $_))[1]  foreach @list_to_build_on_cd;
-    foreach (@toto) {
-	s/\s+\(tail://gi;
-	s/\s+//gi;
-	s/ko//gi;
-	$total += $_; 
-	}
-    $label_tail->set("total tail: $total ko");
-}
-
-my %check_data_to_backup_cd;
-sub build_backup_cd_select_data {
-    my $retore_step_user;
-    find_backup_to_put_on_cd();
-    @list_to_build_on_cd = sort @data_backuped;
-    @data_backuped = @list_to_build_on_cd;
-
-    gtkpack($advanced_box,
-	    $retore_step_user = gtkpack_(new Gtk::VBox(0,10),
-		     0, new Gtk::VBox(0,10),
-		     0, _("Data list to include on CDROM."),
-		     1, createScrolledWindow( gtkpack__(new Gtk::VBox(0,0),
-						      map { my $name = $_;
-							    my @user_list_tmp = ();
-							    my $b = new Gtk::CheckButton($name); 
-							    if ( grep $name , @list_to_build_on_cd)  {
-								gtkset_active($b, 1);
-							    } else {
-								gtkset_active($b, 0);
-							    }
-							    $b->signal_connect(toggled => sub {
-								if (!$check_data_to_backup_cd{$name}[1] ) {
-								    $check_data_to_backup_cd{$name}[1] = 1;
-								    if (!grep ( /$name$/, @list_to_build_on_cd) ) {
-									push @list_to_build_on_cd, $name;}
-								} else {
-								    $check_data_to_backup_cd{$name}[1] = 0;
-								    foreach (@list_to_build_on_cd) {
-									if ($name ne $_) {
-									    push @user_list_tmp, $_;
-									}
-								    }
-								    @list_to_build_on_cd = @user_list_tmp;
-								}
-								aff_total_tail();
-							    });
-							    $b } (@data_backuped) 
-						      ),
-					      ),
-		      0, new Gtk::HSeparator,
-		      0, $label_tail = new Gtk::Label(" "),
-		      0, new Gtk::HSeparator,
-					 ),
-	    );
-    aff_total_tail();
-    fonction_env(\$retore_step_user, \&restore_step_user, \&build_backup_cd_box, "restore", \&build_backup_box_see_conf);
-    $up_box->show_all();
-}
-
-sub build_backup_cd_box {
-    my $box_build_backup_cd;
-    my $combo_where_cd_time = new Gtk::Combo();
-    my $adj = new Gtk::Adjustment 4.0, 1.0, 10000.0, 1.0, 5.0, 0.0;
-    $combo_where_cd_time->set_popdown_strings ("650","700", "750", "800");
-
-    button_box_build_backup();
-    gtkpack($advanced_box,
-	    $box_build_backup_cd = gtkpack_(new Gtk::VBox(0, 6),
-	 0, my $check_where_cd = new Gtk::CheckButton( _("Use CD/DVDROM to backup")),
-	 0, new Gtk::HSeparator,
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please choose your CD space")), $where_cd),
-		     1, new Gtk::VBox(0, 5),
-		     0, gtkset_usize(gtkset_sensitive($combo_where_cd_time, $where_cd), 100, 20),
-		     ),
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please enter the cd writer speed")),  $where_cd ),
-		     1, new Gtk::VBox(0, 6),
-		     0, gtkset_usize(gtkset_sensitive(my $spinner = new Gtk::SpinButton( $adj, 0, 0), $where_cd ),  100, 20),
-		     ),				 
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please check if you are using CDRW media")), $where_cd),
-		     1, new Gtk::VBox(0, 5),
-		     0, gtkset_sensitive(my $check_cdrw = new Gtk::CheckButton(), $where_cd),
-		     ),
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-	    0, gtkset_sensitive(new Gtk::Label(_("Please check if you want to erase your CDRW before")), $cdrw && $where_cd),
-	    1, new Gtk::VBox(0, 5),
-	    0, gtkset_sensitive(my $check_cdrw_erase = new Gtk::CheckButton(), $cdrw && $where_cd),
-		     ),
-					    0, new Gtk::VBox(0, 5),
-					    0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please enter your CD Writer device name (ex: 0,1,0)")),  $where_cd),
-		     1, new Gtk::VBox(0, 5),
-		     0, gtkset_usize(gtkset_sensitive($cd_devive_entry = new Gtk::Entry(), $where_cd), 100, 20),
-		     ),
-	 0, new Gtk::VBox(0, 5),
-	 0, gtkpack_(new Gtk::HBox(0,10),
-		     0, gtkset_sensitive(new Gtk::Label(_("Please check if you want to include install boot on your CD.")),  0),
-		     1, new Gtk::VBox(0, 5),
-		     0, gtkset_sensitive(my $check_cd_with_install_boot = new Gtk::CheckButton(), 0),
-		     ),
-	 ),
-	    );
-    foreach ([$check_cdrw_erase, \$cdrw_erase], [$check_cd_with_install_boot, \$cd_with_install_boot ]) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; })
-	}
-    gtksignal_connect(gtkset_active($check_where_cd, $where_cd), toggled => sub { 
-	$where_cd = $where_cd ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-	if($where_cd) { $next_widget = \&build_backup_cd_select_data;}
-	else { $next_widget = \&build_backup_cd_box;}
-    });
-    gtksignal_connect(gtkset_active($check_cdrw, $cdrw), toggled => sub { 
-	$cdrw = $cdrw ? 0 : 1;
-	${$central_widget}->destroy();
-	$current_widget->();
-    });
-    if($where_cd) { $next_widget = \&build_backup_cd_select_data;}
-    else { $next_widget = \&build_backup_cd_box;}
-    $cd_devive_entry->set_text( $cd_devive );
-    $cd_devive_entry->signal_connect( 'changed', sub { $cd_devive = $cd_devive_entry->get_text(); });
-    $combo_where_cd_time->entry->set_text($cd_time);
-    $combo_where_cd_time->entry->signal_connect( 'changed', sub { $cd_time = $combo_where_cd_time->entry->get_text()});	       
-    fonction_env(\$box_build_backup_cd, \&build_backup_cd_box, \&build_backup_box, "");
-    $up_box->show_all();
-}
-
-sub build_backup_box {
-    $box2->destroy();
-    my ($pix_cd_map, $pix_cd_mask) = gtkcreate_png("ic82-CD-40");
-    my ($pix_hd_map, $pix_hd_mask) = gtkcreate_png("ic82-discdurwhat-40");
-    my ($pix_options_map, $pix_options_mask) = gtkcreate_png("ic82-moreoption-40");
-
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    1, gtkpack_(new Gtk::VBox(0, 15),	
-					1, new Gtk::VBox(0, 5),	
-					1, gtksignal_connect(my $button_from_conf_file = new Gtk::Button(),
-							     clicked => sub { ${$central_widget}->destroy();
-									      build_backup_box_see_conf();
-									  }),
-					0, new Gtk::VBox(0, 5),	
-# 					1, gtksignal_connect(my $button_on_cd = new Gtk::Button(), 
-# 							     clicked => sub { ${$central_widget}->destroy(); 
-# 									      $where_cd = 1;
-# 									      build_backup_cd_box();
-# 									  }),
-# 					0, new Gtk::VBox(0, 5),	
-					1, gtksignal_connect(my $button_see_conf = new Gtk::Button(), 
-							     clicked => sub { ${$central_widget}->destroy();
-									      build_backup_box_see_conf();
-									  }),
-					1, new Gtk::VBox(0, 5),	
-					),
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-
-    $button_from_conf_file->add(gtkpack(new Gtk::HBox(0,10),
-			      new Gtk::Pixmap($pix_hd_map, $pix_hd_mask),
-			      new Gtk::Label(_("Backup Now from configuration file")),
-			      new Gtk::HBox(0, 5)
-			      ));
-#     $button_on_cd->add(gtkpack(new Gtk::HBox(0,10),
-# 			      new Gtk::Pixmap($pix_cd_map, $pix_cd_mask),
-# 			      new Gtk::Label(_("Backup Now on CDROM")),
-# 			      new Gtk::HBox(0, 5)
-# 			      ));
-    $button_see_conf->add(gtkpack(new Gtk::HBox(0,10),
-			      new Gtk::Pixmap($pix_options_map, $pix_options_mask),
-			      new Gtk::Label(_("View Backup Configuration.")),
-			      new Gtk::HBox(0, 5)
-			      ));
-
-
-    button_box_restore_main();
-    fonction_env(\$box2, \&build_backup_box, \&interactive_mode_box, "options");
-    $up_box->show_all();    
-}
-
-################################################  INTERACTIVE  ################################################  
-
-sub interactive_mode_box {
-    $box2->destroy();
-
-    read_conf_file();
-    gtkadd($advanced_box,
-	   $box2 = gtkpack_(new Gtk::HBox(0, 15),	
-			    1, new Gtk::VBox(0, 5),	
-			    1, gtkpack_(new Gtk::VBox(0, 15),	
-					1, new Gtk::VBox(0, 5),	
-					1, gtksignal_connect(new Gtk::Button(_("Wizard Configuration")), 
-							     clicked => sub { ${$central_widget}->destroy();
-									      read_conf_file();
-									      wizard(); }),
-					1, gtksignal_connect(new Gtk::Button(_("Advanced Configuration")), 
-							     clicked => sub { button_box_adv();
-									      ${$central_widget}->destroy();
-									      advanced_box(); }),
-					1, gtksignal_connect(new Gtk::Button(_("Backup Now")), 
-							     clicked => sub { ${$central_widget}->destroy();
-									      if ($cfg_file_exist) { build_backup_box();}
-									      else { message_noconf_box();}
-									  }),
-					1, gtksignal_connect(new Gtk::Button(_("Restore")), 
-							     clicked => sub {${$central_widget}->destroy(); restore_box();}),
-					1, new Gtk::VBox(0, 5),	
-					),
-			    1, new Gtk::VBox(0, 5),	
-			    ),
-	   );
-    button_box_main();
-    $custom_help = "main";
-    $central_widget = \$box2;
-    $up_box->show_all();    
-}
-
-sub interactive_mode {
-    $interactive = 1;
-    my $box;
-    my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-    init Gtk;
-    $window1->signal_connect (delete_event => sub { Gtk->exit(0) });
-    $window1->set_position(1);
-    $window1->set_title(_("Drakbackup"));
-    my ($pix_u_map, $pix_u_mask) = gtkcreate_png("drakbackup.540x57");
-    read_conf_file();    
-
-    gtkadd($window1,
-	   gtkpack(new Gtk::VBox(0,0),
-		   gtkpack(gtkset_usize($up_box = new Gtk::VBox(0, 5), 540, 400),
-		      $box = gtkpack_(new Gtk::VBox(0, 3),
-			 0,  new Gtk::Pixmap($pix_u_map, $pix_u_mask),
-			    1, gtkpack_(new Gtk::HBox(0, 3),
-				  1, gtkpack_(new Gtk::HBox(0, 15),	
-					     0, new Gtk::HBox(0, 5),	
-					     1, $advanced_box = gtkpack_(new Gtk::HBox(0, 15),	
-								      1, $box2 = gtkpack_(new Gtk::VBox(0, 15),	
-											  ),
-									  ),
-					      0, new Gtk::HBox(0, 5),	
-					      ),
-					),
-				      0, new Gtk::HSeparator,
-				      0, $button_box = gtkpack(new Gtk::VBox(0, 15),	
-							       $button_box_tmp = gtkpack(new Gtk::VBox(0, 0),	
-											 ),
-							       ),
-				      ),
-			   ),
-		   ),
-	   );
-    interactive_mode_box();
-    $custom_help = "main";
-    button_box_main();
-    $central_widget = \$box2;
-    $window1->show_all;
-    $window1->realize;
-    $window1->show_all();    
-    Gtk->main;
-    Gtk->exit(0);
-}
-
-################################################  HELP & ABOUT  ################################################  
-
-
-sub adv_help {
-    my ($function, $custom_help) = @_,
-    my $text = new Gtk::Text(undef, undef);
-    my $advanced_box_help;
-
-################################################  help definition ##############################################
-
-    my %custom_helps = (
-			"options" => 
-			_("options description:
-
- In this step Drakbackup allow you to change:
-
- - The compression mode:
-    
-      If you check bzip2 compression, you will compress
-      your data better than gzip (about 2-10 %).
-      This option is not checked by default because
-      this compression mode needs more time ( about 1000% more).
- 
- - The update mode:
-
-      This option will update your backup, but this
-      option is not really useful because you need to
-      decompress your backup before you can update it.
-      
- - the .backupignore mode:
-
-      Like with cvs, Drakbackup will ignore all references
-      included in .backupignore files in each directories.
-      ex: 
-         #> cat .backupignore
-         *.o
-         *~
-         ...
-      
-
-"), 
-			"mail_pb" =>
-			_("
- Some errors during sendmail are caused by 
- a bad configuration of postfix. To solve it you have to
- set myhostname or mydomain in /etc/postfix/main.cf
-
-"),
-
-			"what" =>
-			_("options description:
-
- - Backup system files:
-       
-	This option allows you to backup your /etc directory,
-	which contains all configuration files. Please be
-	careful during the restore step to not overwrite:
-		/etc/passwd 
-		/etc/group 
-		/etc/fstab
-
- - Backup User files: 
-
-	This option allows you select all users that you want 
-	to backup.
-	To preserve disk space, it is recommended that you 
-	do not include web browser's cache.
-
- - Backup Other files: 
-
-	This option allows you to add more data to save.
-	With the other backup it's not possible at the 
-	moment to select select incremental backup.		
- 
- - Incremental Backups:
-
-	The incremental backup is the most powerful 
-	option for backup. This option allows you 
-	to backup all your data the first time, and 
-	only the changed afterward.
-	Then you will be able, during the restore
-	step, to restore your data from a specified
-	date.
-	If you have not selected this option all
-	old backups are deleted before each backup.    
-
-
-"), 
-			"restore" =>
-			_("restore description:
- 
-Only the most recent date will be used ,because with incremental 
-backups it is necesarry to restore one by one each older backups.
-
-So if you don't like to restore an user please unselect all his
-check box.
-
-Otherwise, you are able to select only one of this
-
- - Incremental Backups:
-
-	The incremental backup is the most powerfull 
-	option to use backup, this option allow you 
-	to backup all your data the first time, and 
-	only the changed after.
-	So you will be able during the restore
-	step, to restore your data from a specified
-	date.
-	If you have not selected this options all
-	old backups are deleted before each backup.    
-
-
-
-"),  
-			"main" =>
-			_(" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\@epita.fr>") .
-"\n\n" .
-_(" This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.") .
-"\n\n                                            _____________________\n" .
-_("Description:
-
-  Drakbackup is used to backup your system.
-  During the configuration you can select: 
-	- System files, 
-	- Users files, 
-	- Other files.
-	or All your system ...  and Other (like Windows Partitions)
-
-  Drakbackup allows you to backup your system on:
-	- Harddrive.
-	- NFS.
-	- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).
-	- FTP.
-	- Rsync.
-	- Webdav.
-	- Tape.
-
-  Drakbackup allows you to restore your system to
-  a user selected directory.
-
-  Per default all backup will be stored on your
-  /var/lib/drakbackup directory
-
-  Configuration file:
-	/etc/drakconf/drakbackup/drakbakup.conf
-
-
-Restore Step:
-  
-  During the restore step, DrakBackup will remove 
-  your original directory and verify that all 
-  backup files are not corrupted. It is recommended 
-  you do a last backup before restoring.
-
-
-"),
-			"ftp" =>
-			_("options description:
-
-Please be careful when you are using ftp backup, because only 
-backups that are already built are sent to the server.
-So at the moment, you need to build the backup on your hard 
-drive before sending it to the server.
-
-"),
-			"restore_pbs" =>
-			_("
-Restore Backup Problems:
-
-During the restore step, Drakbackup will verify all your
-backup files before restoring them.
-Before the restore, Drakbackup will remove 
-your original directory, and you will loose all your 
-data. It is important to be careful and not modify the 
-backup data files by hand.
-")
-);
-
-    my $default_help = _(" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\@epita.fr>") .
-"\n\n" .
-_(" This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.") .
-"\n\n                                            _____________________\n" .
-_("Description:
-
-  Drakbackup is used to backup your system.
-  During the configuration you can select 
-	- System files, 
-	- Users files, 
-	- Other files.
-	or All your system ...  and Other (like Windows Partitions)
-
-  Drakbackup allows you to backup your system on:
-	- Harddrive.
-	- NFS.
-	- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).
-	- FTP.
-	- Rsync.
-	- Webdav.
-	- Tape.
-
-  Drakbackup allows you to restore your system to
-  a user selected directory.
-
-  Per default all backup will be stored on your
-  /var/lib/drakbackup directory
-
-  Configuration file:
-	/etc/drakconf/drakbackup/drakbakup.conf
-
-Restore Step:
-  
-  During the restore step, Drakbackup will remove
-  your original directory and verify that all
-  backup files are not corrupted. It is recommended
-  you do a last backup before restoring.
- 
-
-");
-
-################################################  help fonction ##############################################
-
-    gtktext_insert($text, $custom_helps{$custom_help} || $default_help);
-    gtkpack($advanced_box,
-	    $advanced_box_help = gtkpack_(new Gtk::VBox(0,10),
-					  1, gtkpack_(new Gtk::HBox(0,0),
-						      1, $text, 
-						      0, new Gtk::VScrollbar($text->vadj),
-						      ),
-					  0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-						    gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { 
-							${$central_widget}->destroy(); $function->();}),
-						    ),
-					  )
-	    );
-    $central_widget = \$advanced_box_help;
-    $up_box->show_all();
-}
-
-sub to_ok {
-    $sav_next_widget = $next_widget;
-    $next_widget = undef;
-    button_box_wizard();
-}
-
-sub to_normal {
-    $next_widget = $sav_next_widget;
-}
diff --git a/perl-install/standalone/drakboot b/perl-install/standalone/drakboot
deleted file mode 100755
index e7e283c0d..000000000
--- a/perl-install/standalone/drakboot
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use interactive;
-use any;
-use bootloader;
-use detect_devices;
-use fsedit;
-use fs;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakboot [--expert] [--testing]\n";
-
-$::expert = /-expert/;
-$::testing = /-testing/;
-
-my $in = 'interactive'->vnew('su', 'bootloader');
-
-$::lilo_choice = \&lilo_choice;
-
-if ($in->isa('interactive_gtk')) {
-    require 'bootlook.pm';
-} else {
-    lilo_choice();
-}
-
-!$::isEmbedded and $in->exit(0);
-kill(USR1, $::CCPID);
-goto ask;
-
-sub lilo_choice
-{
-    my $bootloader = arch() =~ /ppc/ ? bootloader::read('', '/etc/yaboot.conf') : bootloader::read('', '/etc/lilo.conf');
-    local ($_) = `detectloader`;
-    $bootloader->{methods} = { lilo => 1, grub => !!/grub/i, if_(arch() =~ /ppc/, yaboot => 1) };
-    
-    my ($all_hds) = catch_cdie { fsedit::hds([ detect_devices::hds() ], {}) } sub { 1 };
-    my $fstab = [ fsedit::get_all_fstab($all_hds) ];
-    fs::merge_info_from_fstab($fstab);
- 
-    $::expert=1;
-    
-  ask:
-    local $::isEmbedded = 0;
-    any::setupBootloader($in, $bootloader, $all_hds, $fstab, $ENV{SECURE_LEVEL}) or return;
-    eval { bootloader::install('', $bootloader, $fstab, $all_hds->{hds}) };
-
-    my $loader = arch() =~ /ppc/ ? "Yaboot" : "LILO";
-    if ($@) {
-	$in->ask_warn('', 
-		      [ _("Installation of %s failed. The following error occured:", $loader),
-			grep { !/^Warning:/ } cat_("/tmp/.error") ]);
-	unlink "/tmp/.error";
-	goto ask;
-    }
-}
diff --git a/perl-install/standalone/drakbug b/perl-install/standalone/drakbug
deleted file mode 100755
index 25fe0d8fc..000000000
--- a/perl-install/standalone/drakbug
+++ /dev/null
@@ -1,132 +0,0 @@
-#!/usr/bin/perl -w
-
-# Drak Bug Report 
-# Copyright (C) 2002 MandrakeSoft (daouda@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;
-use interactive;
-use MDK::Common;
-require Gtk;
-require Gtk::Gdk::ImlibImage;
-use my_gtk qw(:helpers :wrappers :ask);
-
-Gtk::Gdk::ImlibImage->init;
-
-my $in = 'interactive'->vnew;
-$::bugzilla_url = "https://qa.mandrakesoft.com";
-
-my $window_g = new Gtk::Window -toplevel;
-$window_g->set_policy($false,$false,$true);
-$window_g->set_position( 1 );
-$window_g->border_width( 5 );
-$window_g->set_title(_("Mandrake Bug Report Tool"));
-#$window_g->set_usize(540, 350);
-$window_g->signal_connect( "delete_event", \&quit_global);
-
-chomp(my $kernel_release = `uname -m -r -s`);
-$kernel_release.="";
-chomp(my $mdk_release = cat_("/etc/mandrake-release"));
-
-my $mdk_app = { 
-	       _("Mandrake Control Center") => 'drakconf',
-	       _("First Time Wizard") => 'drakfw',
-	       _("Synchronization tool") => 'draksync',  
-	       _("Standalone Tools") =>['adduserdrake','diskdrake','drakautoinst','drakbackup','drakboot','drakbug','drakfloppy','drakfont','drakgw','draknet','drakxservices','drakxtv','keyboardrake','logdrake','mousedrake','net_monitor','printerdrake','scannerdrake','tinyfirewall','XFdrake'],
-	       _("HardDrake") => 'harddrake',
-	       _("Mandrake Online") => ['mdkonline','mdkupdate'],
-	       _("Menudrake") => 'menudrake',
-	       _("Remote Control") => 'rfbdrake',
-	       _("Software Manager") => ['rpmdrake','MandrakeUpdate'],
-	       _("Urpmi") => ['urpmi','urpmq','urpme'],
-	       _("Windows Migration tool") => 'transfugdrake',
-	       _("Userdrake") => 'userdrake',
-	       _("Configuration Wizards") => 'wizdrake',
-	      };
-
-gtkpack2__(
-	   gtkpack2__(my $vbx = new Gtk::VBox(0,5),
-		      gtkpack(new Gtk::HBox(0,0),
-			      gtkpack(new Gtk::Label(_("Application:"))),
-			      gtkpack(gtkcombo_setpopdown_strings(my $comb_app = new Gtk::Combo(),("",keys %{$mdk_app}))),
-			     ),
-		      gtkpack(new Gtk::HBox(0,5),
-			      gtkpack(new Gtk::Label(_("Package: "))),
-			      gtkpack(gtkset_text(my $version = new Gtk::Entry(50),"...")),
-			     ),
-		      gtkpack(new Gtk::HBox(0,5),
-			      gtkpack(new Gtk::Label(_("Kernel:"))),
-			      gtkpack(gtkset_text(my $kernel_rel = new Gtk::Entry(50),"$kernel_release")),
-			     ),
-		      gtkpack(new Gtk::HBox(0,0),
-			      gtkpack(new Gtk::Label(_("Release: "))),
-			      gtkpack(gtkset_text(my $compiler = new Gtk::Entry(50),"$mdk_release")),
-			     ),
-		      gtkpack(new Gtk::HBox(0,0),
-			      gtkpack(gtkset_justify(new Gtk::Label(_("\n\nTo submit a bug report, click on the button report.\nThis will open a web browser window  on https://www.bugzilla.com\n where you'll find a form to fill in.The information displayed above will be \ntransferred to that server\n\n")),"left")),
-			     ),
-		      gtkpack(new Gtk::HSeparator),
-		      
-		     ),
-	  );
-my $app_choice;
-
-$comb_app->entry->signal_connect('changed', sub {
-				     if ((my $text = $comb_app->entry->get_text()) ne '') {
- #					 wantarray ? 
-					 exists $mdk_app->{$text}[1] ? chomp($which_app =`which '$mdk_app->{$text}[1]'`) : chomp($which_app = `which '$mdk_app->{$text}'`);
-					 chomp($app_choice = `rpm -qf '$which_app'`); 
-					 $app_choice ne '' ? $version->set_text("$app_choice") : $version->set_text(_("Not installed"));
-				     }
-				 }
-				);
-
-my $hbx = new Gtk::HBox(0,0);
-my $Close_Button = new Gtk::Button(_("Close"));
-$Close_Button->signal_connect(clicked => sub { Gtk->exit(0)});
-$hbx->pack_start($Close_Button,0,0,0);
-my $Report_Button = new Gtk::Button(_("Report"));
-$Report_Button->signal_connect(clicked => sub { connect_bugzilla("https://qa.mandrakesoft.com/wizard.php/");});
-$hbx->pack_end($Report_Button,0,0,0);
-$vbx->pack_start($hbx,0,0,0);
-$window_g->add($vbx);
-
-$window_g->show_all();
-Gtk->main();
-Gtk->exit(0);
-in->exit(0);
-
-
-sub connect_bugzilla {
-    my($url) = @_;
-    my $w = $in->wait_message('',_("connecting to Bugzilla wizard ..."));
-    exec $ENV{BROWSER},$url if $ENV{BROWSER};
-    $in->ask_warn('', _("No browser available please! Please install one"));
-}
-
-sub read_app_context {
-    my ($name) = @_;
-    $na
-}
-
-sub quit_global {
-    Gtk->exit(0);
-}
-
-
-
diff --git a/perl-install/standalone/drakbug_report b/perl-install/standalone/drakbug_report
deleted file mode 100755
index 6b70acb35..000000000
--- a/perl-install/standalone/drakbug_report
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use MDK::Common;
-use any;
-
-my %other = (
-    'rpm -qa' => join('', sort `rpm -qa`),
-    'mandrake version' => cat_('/etc/redhat-release'),
-    'df' => join('', `df`),
-);
-
-print any::report_bug('', %other);
diff --git a/perl-install/standalone/drakfloppy b/perl-install/standalone/drakfloppy
deleted file mode 100755
index 6c59311ec..000000000
--- a/perl-install/standalone/drakfloppy
+++ /dev/null
@@ -1,456 +0,0 @@
-#!/usr/bin/perl -w
-
-# Control-center
-# $Id$
-# 
-# Copyright (C) 2001-2002 MandrakeSoft
-# Yves Duret <yduret at mandrakesoft.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, 
-# MA 02111-1307, USA.
-
-
-use POSIX;
-use Gtk;
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use Config;
-use any;
-init Gtk;
-Gtk->set_locale;
-
-#-------------------------------------------------------------
-# i18n routines
-# IMPORTANT: next two routines have to be redefined here to
-#         get correct namespace (drakconf instead of libDrakX)
-#         (This version is now UTF8 compliant - Sg 2001-08-18)
-#-------------------------------------------------------------
-
-sub _ {
-    my $s = shift @_; my $t = translate($s);
-    sprintf $t, @_;
-}
-
-sub translate {
-    my ($s) = @_;
-    $s ? c::dgettext('drakfloppy', $s) : '';
-}
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\S*) (\S*)/;
-if ($::isEmbedded) {
-  print "EMBED\n";
-  print "XID : $::XID\n";
-  print "CCPID :  $::CCPID\n";
-}
-
-$in = 'interactive'->vnew('su', 'default');
-local $_ = join '', @ARGV;
-
-/-h/ and die _("usage: drakfloppy\n");
-
-$expert_mode = 0;
-# we have put here the list in order to do $list->clear() when we have to do
-$fixed_font = Gtk::Gdk::Font->fontset_load(_("-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"));
-my @titles = ( _("Module name"), _("Size") );
-my $list = new_with_titles Gtk::CList( @titles );
-
-my $window = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-$window->signal_connect( 'delete_event', sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) });
-$window->set_title( _("drakfloppy") );
-$window->set_policy(1, 1, 1);
-$window->border_width (5);
-
-### menus definition
-# the menus are not shown
-# but they provides shiny shortcut like C-q
-my @menu_items = ( 
-		  { path => _("/_File"), type => '<Branch>' },
-		  { path => _("/File/_Quit"), accelerator => _("<control>Q"), callback => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) } },
-		 );
-my $menubar = get_main_menu( $window );
-
-######### menus end
-
-my $global_vbox = new Gtk::VBox();
-
-$::isEmbedded or $global_vbox->pack_start (new Gtk::Label(_("boot disk creation")), 0, 0, 0);
-
-######## up part
-my $up_vbox  = new Gtk::VBox (0, 0);
-
-# device part
-my $dev_hbox = new Gtk::HBox (1, 0);
-my $device_combo = new Gtk::Combo();
-my $device_button = new Gtk::Button( _("default") );
-
-$device_combo->set_popdown_strings( "/dev/fd0", "/dev/fd1", );
-$device_button->signal_connect( 'clicked', sub { $device_combo->entry->set_text("/dev/fd0");});
-
-$dev_hbox->pack_start (new Gtk::Label( _("device") ), 0, 0, 0);
-$dev_hbox->pack_start ($device_combo, 0, 0, 0);
-$dev_hbox->pack_start ($device_button, 0, 0, 0);
-$up_vbox->pack_start  ($dev_hbox, 0, 0, 0);
-
-# kernel part
-my $ker_hbox = new Gtk::HBox (1, 0);
-my $kernel_combo = new Gtk::Combo();
-my $kernel_button = new Gtk::Button( _("default") );
-$kernel_combo->disable_activate();
-$kernel_combo->set_popdown_strings( do {
-    opendir YREP, "/lib/modules" or die _("DrakFloppy Error: %s", $!);
-    my @files_modules = grep !/^\.\.?$/, readdir YREP;
-    closedir YREP;
-    @files_modules;
-});
-#$kernel_combo->entry->set_text(`uname -r`);
-$kernel_combo->entry->signal_connect( "changed", sub { change_tree($kernel_combo->entry->get_text()); $list->clear();});
-$aaaa= `uname -r`;
-chomp ($aaaa);
-$kernel_button->signal_connect( 'clicked', sub { $kernel_combo->entry->set_text($aaaa); $list->clear(); });
-
-$ker_hbox->pack_start (new Gtk::Label( _("kernel version") ), 0, 0, 0);
-$ker_hbox->pack_start ($kernel_combo, 0, 0, 0);
-$ker_hbox->pack_start ($kernel_button, 0, 0, 0);
-$up_vbox->pack_start  ($ker_hbox, 0, 0, 5);
-
-# vbox part
-my $up_frame = new Gtk::Frame( _("General") );
-$up_frame->add($up_vbox);
-$global_vbox->pack_start ($up_frame, 1, 1, 0);
-
-### expert mode
-my $expert_main_frame = new Gtk::Frame( _("Expert Area") );
-my $expert_dedans = new Gtk::VBox( 0, 5 );
-$expert_dedans->border_width (5);
-my $expert_button_frame = new Gtk::Frame( _("mkinitrd optional arguments") );
-my $expert_mod_frame = new Gtk::Frame( _("Add a module") );
-my $expert_pane = new Gtk::HPaned();
-$expert_pane->set_handle_size( 10 );
-$expert_pane->set_gutter_size( 8 );
-
-my $expert_button = new Gtk::Button( _("Expert Mode") );
-$expert_button->signal_connect( "clicked", sub {
-				  if ($expert_mode) {
-				    $expert_mod_frame->hide();
-				    $expert_button_frame->hide()
-				  } else {
-				    $expert_mod_frame->show();
-				    $expert_button_frame->show();
-				  }
-				    $expert_mode = !$expert_mode;
-				});
-
-my $expert_button_vbox = new Gtk::VBox(0, 5);
-my $expert_button_hbox = new Gtk::HBox(0, 5);
-my $expert_button_hbox2 = new Gtk::HBox(0, 5);
-my $force_button = new Gtk::ToggleButton( _("force") );
-my $needed_button = new Gtk::ToggleButton( _("if needed") );
-my $scsi_button = new Gtk::ToggleButton( _("omit scsi modules") );
-my $raid_button = new Gtk::ToggleButton( _("omit raid modules") );
-$expert_button_hbox->pack_start( $force_button, 0, 0, 0 );
-$expert_button_hbox->pack_start( $raid_button, 0, 0, 0 );
-
-$expert_button_hbox2->pack_start( $needed_button, 0, 0, 0 );
-$expert_button_hbox2->pack_start( $scsi_button, 0, 0, 0 );
-
-$expert_button_vbox->pack_start($expert_button_hbox, 0, 0, 0);
-$expert_button_vbox->pack_start($expert_button_hbox2, 0, 0, 0);
-$expert_button_frame->add($expert_button_vbox);
-$expert_dedans->pack_start ($expert_button_frame, 0, 0, 0);
-$expert_mod_frame->add($expert_pane);
-$expert_dedans->pack_start ($expert_mod_frame, 1, 1, 0);
-$expert_main_frame->add($expert_dedans);
-$global_vbox->pack_start ($expert_main_frame, 1, 1, 0);
-
-### the tree
-
-# Create a ScrolledWindow for the tree
-my $tree_scrolled_win = new Gtk::ScrolledWindow();
-$tree_scrolled_win->set_usize( 200, $::isEmbedded ? 0 : 175);
-$expert_pane->add1( $tree_scrolled_win );
-$tree_scrolled_win->set_policy( 'automatic', 'automatic' );
-
-# Create root tree
-my $tree = new Gtk::Tree();
-my $leaf;
-my $root_dir;
-$tree_scrolled_win->add_with_viewport( $tree );
-$tree->set_selection_mode( 'single' );
-$tree->set_view_mode( 'item' );
-
-fill_tree ($kernel_combo->entry->get_text());
-
-# Create a ScrolledWindow for the list
-my $list_scrolled_win = new Gtk::ScrolledWindow( undef, undef );
-my $rmmod_button = new Gtk::Button( _("Remove a module") );
-my $expert_inside_pane2 = new Gtk::VBox (0, 0);
-my $list_selected_row;
-
-$expert_inside_pane2->pack_start ($list_scrolled_win, 1, 1, 0);
-$expert_inside_pane2->pack_start ($rmmod_button, 0, 0, 0);
-$expert_pane->add2( $expert_inside_pane2 );
-$list_scrolled_win->set_policy( 'automatic', 'automatic' );
-$rmmod_button->signal_connect('clicked', sub {$list->remove($list_selected_row);});
-
-# Create list box
-########################################################## from here my $list
-$list->signal_connect('select_row', sub { (undef, $list_selected_row) = @_; });
-$list_scrolled_win->add( $list );
-$list->set_column_justification(1, 'right');
-$list->set_column_width( 0, 200 );
-$list->set_column_width( 1, 50 );
-$list->set_selection_mode( 'single' );
-$list->set_shadow_type( 'none' );
-$list->show();
-
-### output
-my $output_frame = new Gtk::Frame( _("Output") );
-my $output = new Gtk::Text( undef, undef );
-my $vscrollbar = new Gtk::VScrollbar( $output->vadj );
-my $output_hbox = new Gtk::HBox (0, 0);
-$output_hbox->border_width (5);
-$output_hbox->set_usize( 30, 75 );
-$output_hbox->pack_start( $output, 1, 1, 0 );
-$output_hbox->pack_start( $vscrollbar, 0, 0, 0 );
-$output_frame->add ($output_hbox);
-$global_vbox->pack_start ($output_frame, 0, 0, 0);
-
-### final buttons
-my $build_button = new Gtk::Button( _("Build the disk") );
-my $cancel_button = new Gtk::Button( _("Cancel") );
-my $fin_hbox = new Gtk::HBox( 0, 0 );
-$cancel_button->signal_connect( clicked=> sub {$::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0)});
-$build_button->signal_connect('clicked', \&build_it);
-$fin_hbox->pack_end($cancel_button, 0, 0, 0);
-$fin_hbox->pack_end($build_button,  0, 0, 10);
-$fin_hbox->pack_end($expert_button, 0, 0, 10);
-$global_vbox->pack_start ($fin_hbox, 0, 0, 0);
-
-### back to window
-$window->add( $global_vbox );
-
-$window->show_all();
-$expert_mod_frame->hide();
-$expert_button_frame->hide();
-
-Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill USR2, $::CCPID;
-Gtk->main;
-
-
-
-#-------------------------------------------------------------
-# tree functions
-#-------------------------------------------------------------
-### Subroutines
-
-sub fill_tree {
-  ($root_dir) = @_;
-  $root_dir = "/lib/modules/" . $root_dir;
-  # Create root tree item widget
-  $leaf = new_with_label Gtk::TreeItem( $root_dir );
-  $tree->append( $leaf );
-  $leaf->signal_connect( 'select', \&select_item, $root_dir );
-  $leaf->set_user_data( $root_dir );
-
-  # Create the subtree
-  if ( has_sub_trees( $root_dir ) ) {
-    my $subtree = new Gtk::Tree();
-    $leaf->set_subtree( $subtree );
-    $leaf->signal_connect( 'expand', \&expand_tree, $subtree );
-    $leaf->signal_connect( 'collapse', \&collapse_tree );
-    $leaf->expand();
-  }
-}
-
-sub change_tree {
-  $leaf->destroy();
-  fill_tree (@_);
-  $leaf->show();
-}
-
-# Callback for expanding a tree - find subdirectories, files and add them to tree
-sub expand_tree
-  {
-    my ( $item, $subtree ) = @_;
-
-    my $dir_entry;
-    my $path;
-    my $item_new;
-    my $new_subtree;
-
-    my $dir = $item->get_user_data();
-
-    chdir( $dir );
-
-    foreach $dir_entry ( <*> ) {
-      if (( -d $dir_entry ) or ( $dir_entry =~ /\.o(\.gz)?$/)) {
-	$path = $dir . "/" . $dir_entry;
-	$path =~ s|//|/|g;
-	$item_new = new_with_label Gtk::TreeItem( $dir_entry );
-	$item_new->set_user_data( $path );
-	$item_new->signal_connect( 'select', \&select_item, $path );
-	$subtree->append( $item_new );
-	$item_new->show();
-
-	if ( has_sub_trees( $path ) ) {
-	  $new_subtree = new Gtk::Tree();
-	  $item_new->set_subtree( $new_subtree );
-	  $item_new->signal_connect( 'expand', \&expand_tree, $new_subtree );
-	  $item_new->signal_connect( 'collapse', \&collapse_tree );
-	}
-      }
-    }
-    chdir( ".." );
-  }
-
-
-# Callback for collapsing a tree -- removes the subtree
-sub collapse_tree
-  {
-    my ( $item ) = @_;
-    my $subtree = new Gtk::Tree();
-
-    $item->remove_subtree();
-    $item->set_subtree( $subtree );
-    $item->signal_connect( 'expand', \&expand_tree, $subtree );
-  }
-
-# Called whenever an item is clicked on the tree widget.
-sub select_item  {
-  my ( $widget, $file ) = @_;
-  return  if (-d $file);
-  my  $size = ( lstat( $file ) )[ 7 ];
-  my $lr = $list->rows();
-  my $i;
-  $file =~ s|/lib/modules/.*?/||g;
-  for ($i=0; $i < $lr; $i++) {
-    last if ($file eq $list->get_text($i, 0));
-  }
-  print $file,"\n";
-  
-  $list->append($file, $size) if ($i == $lr) or ($lr == 0);
-}
-
-#-------------------------------------------------------------
-# menu callback functions
-#-------------------------------------------------------------
-
-sub print_hello {
-  print "mcdtg !\n";
-}
-
-sub get_main_menu {
-  my ( $window ) = @_;
-  my $accel_group = new Gtk::AccelGroup();
-  my $item_factory = new Gtk::ItemFactory( 'Gtk::MenuBar', '<main>', $accel_group );
-  $item_factory->create_items( @menu_items );
-  $window->add_accel_group( $accel_group );
-  return ( $item_factory->get_widget( '<main>' ) );
-}
-
-
-sub create_dialog {
-    my ( $label, $c ) = @_;
-    my $ret = 0;
-    my $dialog = new Gtk::Dialog;
-    $dialog->signal_connect ( delete_event => sub {Gtk->main_quit();});
-    $dialog->set_title(_("drakfloppy"));
-    $dialog->border_width(10);
-    $dialog->vbox->pack_start(new Gtk::Label($label),1,1,0);
-
-    my $button = new Gtk::Button _("OK");
-    $button->can_default(1);
-    $button->signal_connect(clicked => sub { $ret = 1; $dialog->destroy(); Gtk->main_quit(); });
-    $dialog->action_area->pack_start($button, 1, 1, 0);
-    $button->grab_default;
-
-    if ($c) {
-	my $button2 = new Gtk::Button _("Cancel");
-	$button2->signal_connect(clicked => sub { $ret = 0; $dialog->destroy(); Gtk->main_quit(); });
-	$button2->can_default(1);
-	$dialog->action_area->pack_start($button2, 1, 1, 0);
-    }
-
-    $dialog->show_all;
-    Gtk->main();
-    $ret;
-}
-
-sub destroy_window {
-	my($widget, $windowref, $w2) = @_;
-	$$windowref = undef;
-	$w2 = undef if defined $w2;
-	0;
-}
-
-
-#-------------------------------------------------------------
-# the function
-#-------------------------------------------------------------
-sub build_it {
-  my $y;
-  my $co = "/sbin/mkbootdisk --noprompt --verbose --device ". $device_combo->entry->get_text();
-  if ($expert_mode) {
-    $co .= " --mkinitrdargs -f" if $force_button->get_active;
-    $co .= " --mkinitrdargs --ifneeded" if $needed_button->get_active;
-    $co .= " --mkinitrdargs --omit-scsi-modules" if $scsi_button->get_active;
-    $co .= " --mkinitrdargs --omit-raid-modules" if $raid_button->get_active;
-    for (my $i=0; $i<$list->rows(); $i++) {
-      $y = $list->get_text($i, 0);
-      $y =~ s|.*?/||g;
-      $co .= " --mkinitrdargs --with=" . $y; #. "/usr/lib/" . $kernel_combo->entry->get_text() . "/" . $y;
-    }
-  }
-  $co .= " " . $kernel_combo->entry->get_text();
-  $co .= " 2>&1 |";
-  create_dialog(_("Be sure a media is present for the device %s",  $device_combo->entry->get_text()), 1) or return;
-# we test if the media is present
- test:
-  my $a = "dd count=1 if=/dev/null of=". $device_combo->entry->get_text() ." 2>&1";
-  my $b= `$a`;
-  if ($b =~ "dd") {create_dialog(_("There is no medium or it is write-protected for device %s.\nPlease insert one.", $device_combo->entry->get_text()), 1) ? goto test : return 0; }
-  
-  open STATUS, $co or do { create_dialog(_("Unable to fork: %s", $!), 0); return; };
-  while (<STATUS>) {
-      $output->insert( $fixed_font, undef, undef, $_ );
-  }
-  close STATUS or create_dialog(_("Unable to close properly mkbootdisk: \n %s \n %s", $!, $?), 0);
-  
-  return (0);
-}
-
-####
-# This is put at the end of the file because any translatable string
-# appearing after this will not be found by xgettext, and so wont end in
-# the pot file...
-####
-
-# Test whether a directory has subdirectories
-sub has_sub_trees
-  {
-    my ( $dir ) = @_;
-    my $file;
-
-    foreach $file ( <$dir/*> ) {
-      return 1 if ( -d $file ) or ($file =~ /\.o(\.gz)?$/);
-    }
-
-    return (0);
-  }
-
diff --git a/perl-install/standalone/drakfont b/perl-install/standalone/drakfont
deleted file mode 100755
index cdfba00b8..000000000
--- a/perl-install/standalone/drakfont
+++ /dev/null
@@ -1,957 +0,0 @@
-#!/usr/bin/perl 
-#
-# Copyright (C) 2001 by MandrakeSoft (sdupont@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# drakfont Future Overview
-#         - Fonts import :
-#                 pfb ( Adobe Type 1 binary )
-#                 pfa ( Adobe Type 1 ASCII )
-#                 ttf ( True-Type  )
-#                 pcf.gz
-#                 Speedo
-#                 and Bitmap (PCF, BDF, and SNF)
-#         - Features
-#                 - Install fonts from any directory
-#                 - Get windows fonts on any vfat partitions
-#                 - Get fonts on any partitions.
-#                 - UN-installation of any fonts (even if not installed through drakfont)
-#         - Support
-#               - Xfs
-#               - ghostscript & printer
-#               - Staroffice & printer
-#               - abiword
-#		- netscape
-#               - Koffice, Gnumeric, ... studying
-#               - all fonts supported by printer
-#               - anti-aliases by RENDER in Xfree86 .... 
-# 				supported by KDE.
-# 				will be supported by gnome 1.2.
-# Visual Interface:
-#         Window interface:
-#           - Fontselectiondialog widget
-#           - Command buttons under Fontselectiondialog (like the actual frontend).
-#         Commands buttons:
-#           - import from windows partition.
-#                 import from all fat32 partitions and look for winnt/windows/font
-#                 and import all (delete doublon) but don't import if already exist.
-#           - import from directory
-#                 look for if it exist before for each font and not delete the original.
-#                 (replace all, no, none)
-#                 expert options:
-#                         ask the directory, and look for if it exist before
-#                         if it exist ask: (replace all, no, none)
-#           - uninstall with list per font type
-#         Expert additional switch
-#           - option support:   ghostscript, Staroffice, etc...
-#                 check-button. (by default all check)
-#           - Printer Application Fonts Support...
-#                 check-button. (by default all check)
-#
-# TODO:
-#     - abiword, Koffice, Gnumeric, ...  
-#     - Speedo  and Bitmap (PCF, BDF, and SNF)
-#     - option strong: strong verification with ttmkfdir -c ?
-#                
-# REQUIRE:
-#     - font-tools.*.mdk.i586.rpm
-#
-# USING:
-#    -  pfm2afm:   by Ken Borgendale: Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)
-#    -  type1inst: by James Macnicol: type1inst generates files fonts.dir fonts.scale & Fontmap.
-#    -  ttf2pt1:   by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  convert ttf font files to afm and pfb fonts
-#
-#
-# directory to install fonts /usr/X11R6/lib/X11/fonts/
-# -->> /usr/X11R6/lib/X11/fonts/drakfont
-
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX );
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use my_gtk qw(:helpers :wrappers);
-use common;
-#use strict;
-#use Config;
-#use POSIX;
-
-my $in = 'interactive'->vnew('su', 'network');
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\S*) (\S*)/;
-
-if ("@ARGV" =~ /--help|-h/) {
-    print q(Font Importation and monitoring application
---windows_import : import from all available windows partitions.
---xls_fonts      : show all fonts that already exist from xls
---strong         : strong verification of font.
---install        : accept any font file and any directry.
---uninstall      : uninstall any font or any directory of font.
---replace        : replace all font if already exist
---application    : 0 none application.
-                 : 1 all application available supported.
-                 : name_of_application like  so for staroffice 
-                 : and gs for ghostscript for only this one.
-);
-    exit(0);
-}
-
-#   global variables needed by each functions
-my $xlsfonts = 0;
-my $windows = 0;
-my $strong;
-my $replace;
-my $application;
-my $install;
-my $uninstall;
-my $so = 1;
-my $gs = 1;
-my $abi = 1;
-my $printer = 1;
-my $mode = -1;
-my @application;
-my @install;
-my @uninstall;
-my $interactive;
-my $text;
-my $vscrollbar;
-my $check4;
-my $check1;
-my $check2;
-my $check3;
-my $pbar;
-my $pbar1;
-my $pbar2;
-my $pbar3;
-my $font_box;
-my $central_widget;
-my $label1;
-my $label2;
-my $label3;
-my $label4;
-my $list_path;
-my $path_list;
-my $current_path;
-my $list;
-my $list_all_font_path;
-
-foreach (@ARGV) {
-    /--list|-l/ and $list_all_font_path = 1, $mode=-1;
-    /--xls_fonts/ and $xlsfonts = 1, $mode=-1;
-    /--windows_import|-wi/ and $windows = 1, $mode=-1;
-    /--strong|-s/ and $strong = 1, $mode=-1;
-    /--replace|-r/ and $replace = 1, $mode=-1;
-    /--application/ and $mode = 0, next;
-    $mode == 0 and push @application, $_;
-    /--install/ and $mode = 1, next;
-    $mode == 1 and push @install, $_;
-    /--uninstall/ and $mode = 2, next;
-    $mode == 2 and push @uninstall, $_;
-}
-
-foreach my $i (@application) {
-    if ( $i =~ /so/i) {
-	if ( $gs != 2 ) { $gs = 0;}
-	$so = 2;
-    }
-    if ($i  =~ /gs/i){ 
-	if ( $so != 2 ) { $so = 0; }
-	$gs = 2;
-    }
-}
-
-# PATH and binary full path
-my $xfs_conffile = '/etc/X11/fs/config';
-my $drakfont_dir = '/usr/X11R6/lib/X11/fonts/drakfont';
-my $ttf2pt1 = '/usr/sbin/ttf2pt1';
-my $pfm2afm = '/usr/sbin/pfm2afm';
-my $type1inst = '/usr/sbin/type1inst';
-my $chkfontpath = '/usr/sbin/chkfontpath';
-my $mkttfdir = '/usr/X11R6/bin/mkttfdir';
-my $ghostscript;
-#my $ttmkfdir = '/usr/sbin/ttmkfdir';
-
-# Global lists, just to manipulate it easily.
-# my @font_list                    => list of fonts to install.
-# my @installed_fonts;             => list of installed fonts.
-# my @installed_fonts_path;        => list of path included in xfs.
-# my @fontsdir_to_install;         => list of fonts to uninstall.
-# my @fontsdir_to_uninstall;       => path to remove in xfs font file.
-# my @installed_fonts_full_path;   => full path list of fonts to uninstall.
-
-my @font_list;
-my @installed_fonts;
-my @installed_fonts_path;
-my @fontsdir_to_install;
-my @fontsdir_to_uninstall;
-my @installed_fonts_full_path;
-
-sub list_fontpath {
-    foreach (grep { /\d+:\s/ } `$chkfontpath -l`) {
-	chomp;
-	s/\d+:\s//gi;
-	s/:\w*$//gi;
-	push @installed_fonts_path, $_;
-    }
-}
-
-sub chk_empty_xfs_path {
-    my @temp3;
-    foreach  my $tmp_path (@installed_fonts_path) {
-	@temp3 = ();
-	foreach my $temp2 (all($tmp_path)) {
-	    if (!(($temp2 =~ /^fonts/ ) || ($temp2 =~ /^type/ ))) {
-		push @temp3, $temp2;
-	    }
-	}
-	if(!(@temp3)) {
-	    system("chkfontpath -r $tmp_path ") or 
-		print "PERL::system command failed during chkfontpath\n";
-	}
-    }
-}
-
-sub search_installed_fonts {
-    list_fontpath();
-    $interactive and progress($pbar, 0.1, _("Search installed fonts"));
-    push @installed_fonts, all($_) foreach @installed_fonts_path;
-    $interactive and progress($pbar, 0.1, _("Unselect fonts installed"));
-}
-
-sub search_installed_fonts_full_path {
-    list_fontpath();
-    foreach my $i (@installed_fonts_path) {
-	foreach my $j (all($i)) {
-	    push @installed_fonts_full_path, "$i/$j";
-	}
-    }
-}
-
-sub search_windows_font {
-    foreach my $fstab_line (grep { /vfat|ntfs/ } cat_('/etc/mtab') ) {
-	my $win_dir = (split('\s', $fstab_line))[1];
-	my @list_fonts_win = all("$win_dir/windows/fonts");
-	my @list_fonts_winnt = all("$win_dir/winnt/fonts");
-	my $nb_dir = @list_fonts_win + @list_fonts_winnt;
-	foreach ([\@list_fonts_win, "windows"], [\@list_fonts_winnt, "winnt"]) {
-	    foreach my $i (@{$_->[0]}) {
-		if($interactive) {
-		    if($nb_dir) { progress($pbar, 0.25/$nb_dir, _("parse all fonts")) } else {
-			display_error(_("no fonts found"));
-			return 0;
-		    }
-		}
-		!$replace && grep(/$i/, @installed_fonts) and next;
-		grep ( /$i$/, @font_list) or push @font_list, "$win_dir/$_->[1]/fonts/$i";
-	    }
-	}
-	$interactive && $nb_dir and  progress($pbar, 1, _("done"));
-    }
-    if(!@font_list) {
-	print "drakfont:: could not find any font in /win*/fonts \n";
-	$interactive and display_error(_("could not find any font in your mounted partitions"));
-	return 0;
-    }
-    1;
-}
-
-sub is_a_font {
-    local $_ = $_[0];
-    /\.ttf$/i || /\.pfa$/i || /\.pfb$/i || /\.pcf$/i || /\.pcf\.gz$/i || /\.pfm$/i || /\.gsf$/;
-}
-
-# Optimisation de cette etape indispensable
-sub search_dir_font {
-    foreach my $fn (@install) {
-	my @font_list_tmp = ();
-	my @font_list_tmpp = ();
-	my $dir ;
-	if (!(-e $fn )) { print "$_ :: no such file or directory \n" } else {
-	    if ( -d $fn ) {
-		$dir = $fn;
-		foreach my $i (all($fn)) {
-		    if (is_a_font($i)) {
-			push @font_list_tmp, "$i";
-			foreach my $i (@font_list_tmp) {
-			    !$replace && grep(/$i/, @installed_fonts) and next;
-			    grep /$i/, @font_list or push @font_list, "$fn/$i";
-			}
-		    }
-		}
-	    } else {
-		if (is_a_font($fn)) {
-		    !$replace && grep(/$fn/, @installed_fonts) and next;
-		    !grep /$fn/, (@installed_fonts) and push @font_list, "$fn";
-		}
-	    }
-	}
-	$interactive and progress($pbar, 0.50/@install, _("Reselect correct fonts"));
-    }
-    $interactive and progress($pbar, 1, _("done"));
-    !@font_list && $interactive and display_error(_("could not find any font.\n"));
-}
-
-sub search_dir_font_uninstall {
-    my @font_list_tmp = ();
-    my $fn = $_;
-    if ( -d $fn ) { 
-	foreach my $i (all($fn)) {
-	    if (is_a_font($i)) { push @font_list_tmp, "$i"; }
-	}
-    }
-    else { if (is_a_font($fn)) { push @font_list_tmp, "$fn"; }
-       }
-    foreach my $i (@installed_fonts_full_path) {
-	foreach my $j (@font_list_tmp) {
-	    if ( $i =~ /$j/) { push @font_list, "$i" ;}
-	}
-    }
-    print "Fonts to uninstal : " . $_ . "\n" foreach (@font_list);
-}
-
-sub search_dir_font_uninstall_gi {
-    @font_list = @uninstall;
-    $interactive and progress($pbar, 1, _("Search fonts in installed list"));
-}
-
-sub print_list { print "Font(s) to Install :\n\n"; print "$_\n" foreach (@font_list) }
-
-sub dir_created {
-    -e $drakfont_dir		    || mkdir_p($drakfont_dir);
-    -e $drakfont_dir . "/Type1"	    || mkdir_p($drakfont_dir."/Type1"); 
-    -e $drakfont_dir . "/ttf"	    || mkdir_p($drakfont_dir."/ttf");
-    -e $drakfont_dir . "/tmp"	    || mkdir_p($drakfont_dir."/tmp");
-    -e $drakfont_dir . "/tmp/ttf"   || mkdir_p($drakfont_dir."/tmp/ttf");
-    -e $drakfont_dir . "/tmp/Type1" || mkdir_p($drakfont_dir."/tmp/Type1");
-    -e $drakfont_dir . "/tmp/tmp"   || mkdir_p($drakfont_dir."/tmp/tmp");
-}
-
-sub put_font_dir {
-    my @tmpl;
-    my @list_ttf;
-    -e "/usr/share/ghostscript" or $gs = 0 && print "ghostscript is not installed on your system...\n"  ;
-    if (@font_list) {
-	dir_created();
-	foreach my $i (@font_list) {
-	    cp_af($i, $drakfont_dir . "/tmp/tmp");
-	    $interactive and progress($pbar1, 1/@font_list, _("Fonts copy"));
-	}
-	$interactive and progress($pbar1, 0.01, _("done"));
-	$interactive and progress($pbar2, 0.10, _("True Type fonts installation"));
-	glob ("$drakfont_dir/tmp/tmp/*.TTF") and 
-	system ('cd '.$drakfont_dir.'/tmp/tmp ; for foo in *.TTF; do mv $foo `basename $foo .TTF`.ttf; done');
-	system ('cd '.$drakfont_dir.'/tmp/tmp  && cp *.ttf ../../ttf');
-	$interactive and progress($pbar2, 0.20, _("please wait during ttmkfdir..."));
-#	system ('cd '.$drakfont_dir.'/ttf && $ttmkfdir > fonts.dir' );
-	my $ttfdir = $drakfont_dir . "/ttf";
-	`$mkttfdir $ttfdir`;
-	$interactive and progress($pbar2, 0.10, _("True Type install done"));
-	my $update_chkfontpath = "$chkfontpath -a $drakfont_dir/ttf";
-	
-	if ($so && $gs)  {
-	    my @glob_drak = glob ("$drakfont_dir/tmp/tmp/*.ttf");
-	    foreach my $fontname (@glob_drak) { 
-		system ("cd $drakfont_dir/tmp/tmp && $ttf2pt1 -b $fontname");
-		$interactive and progress($pbar2, 0.50/@glob_drak, _("Fonts conversion"));
-	    }
-	    system ("cd $drakfont_dir/tmp/tmp && mv *.gsf *.pfb *.pfm *.afm ../Type1");
-	    system ("cd $drakfont_dir/tmp/Type1 && $type1inst" );
-	    $interactive and progress($pbar2, 0.10, _("type1inst building"));
-	    -e "$drakfont_dir/tmp/Type1/Fontmap" and
-	    system ("cd $drakfont_dir/tmp/Type1 && cat Fontmap >> `rpm -ql ghostscript | grep Fontmap.GS` " );
-	    system ("cd $drakfont_dir/tmp/Type1 && mv *.pfm *.gsf *.afm *.pfb ../../Type1 ");
-	    system ("cd $drakfont_dir/Type1 && $type1inst");
-	    $interactive and progress($pbar2, 0.05, _("Ghostscript referencing"));
-	    $update_chkfontpath .= "; $chkfontpath -a $drakfont_dir/Type1";
-	}
-	
-	if (!$so && $gs)  {
-	    foreach my $fontname ( @tmpl = glob ("$/drakfont_dir/tmp/tmp/*.ttf") ) { 
-		system ("cd $/drakfont_dir/tmp/tmp && $ttf2pt1 -b $fontname");
-		$interactive and progress($pbar2, 0.50/@tmpl, _("Fonts conversion"));
-	    }
-	    system ("cd $drakfont_dir/tmp/tmp && mv *.gsf *.pfb *.pfm ../Type1");
-	    system ("cd $drakfont_dir/tmp/Type1 && $type1inst" );
-	    $interactive and progress($pbar2, 0.1, _("type1inst building"));
-	    system ("cd $drakfont_dir/tmp/Type1 && cat Fontmap >> `rpm -ql ghostscript | grep Fontmap.GS` " );
-	    system ("cd $drakfont_dir/tmp/Type1 && mv *.pfm *.afm *.gsf *.pfb ../../Type1 ");
-	    system ("cd $drakfont_dir/Type1 && $type1inst");
-	    $interactive and progress($pbar2, 0.05, _("Ghostscript referencing"));
-	    $update_chkfontpath .= "; $chkfontpath -a $drakfont_dir/Type1";
-	}
-	
-	if ($so && !$gs)  {
-	    foreach my $fontname ( @tmpl = glob ("$drakfont_dir/tmp/tmp/*.ttf") ) { 
-		system ("cd $drakfont_dir/tmp/tmp && $ttf2pt1 $fontname");
-		$interactive and progress($pbar2, 0.25/@tmpl, _("ttf fonts conversion"));
-	    }
-	    foreach my $fontname ( @tmpl = glob ("$drakfont_dir/tmp/tmp/*.pfm") ) { 
-		system ("cd $drakfont_dir/tmp/tmp && $pfm2afm $fontname");
-		$interactive and progress($pbar2, 0.25/@tmpl, _("pfm fonts conversion"));
-	    }
-	    system ("cd $drakfont_dir/tmp/tmp && mv  *.afm ../Type1");
-	    system ("cd $drakfont_dir/tmp/Type1 && mv *.afm ../../Type1 ");
-	    system ("cd $drakfont_dir/Type1 && $type1inst");
-	    $interactive and progress($pbar2, 0.14, _("type1inst building"));
-	    $update_chkfontpath .= "; $chkfontpath -a $drakfont_dir/Type1";
-	}
-	
-	$interactive and  progress($pbar2, 0.01, _("done"));
-	$interactive and  progress($pbar3, 0.25, _("Suppress temporary Files"));
-	rm_rf("$drakfont_dir/tmp/");
-	print "\n\nretarting xfs......\n";
-	$interactive and  progress($pbar3, 0.5 , _("Restart XFS"));
-	system ($update_chkfontpath);
-#	system ($restart_xfs);
-#	system('kill -USR1 `/sbin/pidof xfs` 2&1>/dev/null');
-	system ('/etc/rc.d/init.d/xfs restart');
-	$interactive and  progress($pbar3, 0.30, _("done"));
-    }
-}
-
-sub remove_gs_fonts {
-    my @Fontmap_new;
-    
-    if (all("$drakfont_dir/remove"))  {
-	system (" cd $drakfont_dir/remove && $type1inst");
-	my @Fontmap_out = cat_("$drakfont_dir/remove/Fontmap");
-	my $FontmapGS = `rpm -ql ghostscript | grep Fontmap.GS`;
-	chomp ($FontmapGS);
-	my @FontmapGS_list = cat_($FontmapGS);
-	foreach my $font_gs (@FontmapGS_list) {
-	    my @tmp_list = split (' ',$font_gs);
-	    grep ( $_ =~ /$tmp_list[0]/ , @Fontmap_out) or  push @Fontmap_new, $font_gs;
-	}
-	print $_ foreach @Fontmap_new;
-	output($FontmapGS, @Fontmap_new );
-    }
-
-}
-
-sub remove_fonts {
-    my @list_dir;
-    -e $drakfont_dir . "/remove"  || mkdir_p($drakfont_dir . "/remove");
-    $interactive and  progress($pbar, 1, _("done"));
-    foreach my $i (@font_list) {
-	$_ = $i;
-	if ( /.pfb$/ || /.gsf$/ || /.pfm$/ || /.pfa$/ ) {
-	    system ("mv $_ $drakfont_dir/remove ");
-	} else {
-	    rm_rf($i);
-	}
-	$i =~ s/\/\w*\.\w*//gi;
-	grep ( $i, (@list_dir)) or push @list_dir, $i;
-	$interactive and  progress($pbar1, 1/@font_list, _("Suppress Fonts Files"));
-    }
-    $interactive and  progress($pbar1, 0.01, _("done"));
-    -e "/usr/share/ghostscript" and  remove_gs_fonts();
-    foreach my $i (@list_dir) {
-	if (listlength all("$i") < 3)  {
-	    system("chkfontpath -r $i") or print "PERL::system command failed during chkfontpath\n";
-	} else {
-	    system("cd $i && type1inst") or print "PERL::system command failed during cd or type1inst\n";
-	}
-	$interactive and  progress($pbar2, 1/@list_dir, _("Suppress Fonts Files"));
-    }
-    $interactive and  progress($pbar2, 0.01, _("xfs restart"));
-    system ("/etc/rc.d/init.d/xfs restart");
-    -e "/usr/share/ghostscript" and  rm_rf("$drakfont_dir/remove");
-    $interactive and  progress($pbar2, 0.01, _("done"));
-}
-
-sub license_msg {
-    print _("Before installing any fonts, be sure that you have the right to use and install them on your system.\n\n-You can install the fonts using the normal way. In rare cases, bogus fonts may hang up your X Server.")."\n";
-}
-
-$list_all_font_path || $xlsfonts || $windows || @install || @uninstall ? backend_mod() : interactive_mode();
-
-sub backend_mod {
-    if ($xlsfonts) {
-	system ("xlsfonts");
-    }
-    if ($list_all_font_path) {
-	system ("$chkfontpath");
-    }
-    if ($windows) {
-	license_msg();
-	print "\nWindows fonts Installation........\n";
-	search_installed_fonts();
-	if(search_windows_font()) {
-	    print_list();
-	    put_font_dir();
-	}
-	print "\nThe End...........................\n";
-    }
-
-    if (@install) {
-	license_msg();
-	print "\nInstall Specifics Fonts...........\n";
-	search_installed_fonts();
-	search_dir_font;
-	print "Font to install : " . $_ . "\n" foreach (@font_list);
-	put_font_dir();
-	print "\nThe End...........................\n";
-    }
-
-    if (@uninstall) {
-	print "\nUninstall Specifics Fonts.........\n";
-	search_installed_fonts_full_path();
-	if ($interactive) { search_dir_font_uninstall_gi() }
-	else { search_dir_font_uninstall $_ foreach (@uninstall) }
-	remove_fonts();
-	print "\nThe End............................\n";
-    }
-}
-
-sub create_fontsel {
-    my $font_sel;
-    gtkpack($font_box,
-	    $font_sel = new Gtk::FontSelection,
-	    );
-    $central_widget = \$font_sel;
-}
-
-sub display_error {
-    my ($message) = @_;
-    my $label;
-    my $error_box;
-    ${$central_widget}->destroy();
-    gtkpack($font_box,
-	    $error_box = gtkpack_(new Gtk::VBox(0,0),
-		  1, new Gtk::Label($message),
-				  0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					    gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { ${$central_widget}->destroy(); create_fontsel() }),
-					    ),
-				  )
-	    );
-    $central_widget = \$error_box;
-}
-
-sub interactive_mode {
-    my $font_sel;
-    $interactive = 1;
-    init Gtk;
-    my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-    $window1->signal_connect (delete_event => sub { Gtk->exit(0) });
-    $window1->set_position(1);
-    $window1->set_title(_("Fonts Importation"));
-    $window1->set_border_width(5);
-    my ($pix_user_map, $pix_user_mask) = gtkcreate_png("ic-drakfont-48");    
-    my ($pix_u_map, $pix_u_mask) = gtkcreate_png("drakfont.620x57");
-
-    gtkadd($window1,
-	   gtkpack_(new Gtk::VBox(0,2),
-		    if_(!$::isEmbedded, 0,  new Gtk::Pixmap($pix_u_map, $pix_u_mask)),
-		    1, gtkpack_(new Gtk::HBox(0,2),
-			     1, gtkpack_(new Gtk::VBox(0,2),
-					 1, gtkpack($font_box = new Gtk::VBox(0,5),
-						    $font_sel = new Gtk::FontSelection,
-						    ),
-					 1, gtkpack_(new Gtk::HBox(0,2),
-						     0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-							       gtksignal_connect(new Gtk::Button(_("Get Windows Fonts")), clicked 	=>
-sub { ${$central_widget}->destroy(); $windows = 1; appli_choice();}),
-							       gtksignal_connect(new Gtk::Button(_("Uninstall Fonts")), clicked => sub { ${$central_widget}->destroy(); uninstall() }),
-							      ),
-						     0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-							       gtksignal_connect(new Gtk::Button(_("Advanced Options")), clicked =>
-sub {  ${$central_widget}->destroy(); $windows = 0; advanced_install();}),
-							       gtksignal_connect(new Gtk::Button(_("Font List")), clicked 	=>
-sub { ${$central_widget}->destroy(); create_fontsel()}),
-							      ),
-						     1, new Gtk::HBox(0,2),
-						     0, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-							       gtksignal_connect(new Gtk::Button(_("Help")),clicked =>
-sub { ${$central_widget}->destroy(); help() }),
-							       gtksignal_connect(new Gtk::Button(_("Close")), clicked => sub {
-										     $::isEmbedded and kill USR1, $::CCPID;
-										     Gtk->main_quit() }),
-							      ),
-						    ),
-					),
-# 			     0, gtkpack_(new Gtk::VBox(0,5),
-# 					 0, new Gtk::VBox(0,0),
-# 					 0, new Gtk::Pixmap($pix_user_map, $pix_user_mask),
-# 					 1, new Gtk::VBox(0,0),
-# 					 1, gtkadd(gtkset_layout(new Gtk::VButtonBox, -end),
-# 						   gtksignal_connect(new Gtk::Button(_("About")), clicked => sub { 
-# 						       ${$central_widget}->destroy(); about() }),
-# 						   gtksignal_connect(new Gtk::Button(_("             Help           ")), clicked => sub { 
-# 						       ${$central_widget}->destroy(); help() }),
-# 						   gtksignal_connect(new Gtk::Button(_("Close")), clicked => sub {
-# 									 $::isEmbedded and kill USR1, $::CCPID;
-# 									 Gtk->main_quit() }),
-# 						   ),
-# 					 )
-			     ),
-		    ),
-	   );
-    $central_widget = \$font_sel;
-    $window1->show_all;
-    $font_sel->set_page(1);  
-    $font_sel->cur_page->child->hide();
-    $font_sel->set_page(2);  
-    $font_sel->cur_page->child->hide();
-    $font_sel->set_page(0);  
-    $window1->realize;
-#    $window1->show_all();    
-    Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill USR2, $::CCPID;
-    Gtk->main;
-    Gtk->exit(0);
-}
-
-sub about {
-    my $text = new Gtk::Text(undef, undef);
-    my $about_box;
-    gtkpack($font_box,
-	    $about_box = gtkpack_(new Gtk::VBox(0,10),
-	       1, gtkpack_(new Gtk::HBox(0,0),
-			   1, gtktext_insert(gtkset_editable($text, 1), "
- Copyright (C) 2001 by MandrakeSoft 
-	DUPONT Sebastien sdupont\@mandrakesoft.com
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- Thanks:
-    -  pfm2afm:   
-	 by Ken Borgendale:
-	    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)
-    -  type1inst:
-	 by James Macnicol: 
-	    type1inst generates files fonts.dir fonts.scale & Fontmap.
-    -  ttf2pt1:   
-	  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  
-             Convert ttf font files to afm and pfb fonts
-
-
-"),
-			   0, new Gtk::VScrollbar($text->vadj),
-			   ),
-				  0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					    gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { ${$central_widget}->destroy(); create_fontsel() }),
-					    ),
-				  )
-	    );
-    $central_widget = \$about_box;
-    $font_box->show_all();
-}
-
-sub help {
-    my $text = new Gtk::Text(undef, undef);
-    my $help_box;
-    gtkpack($font_box,
-	    $help_box = gtkpack_(new Gtk::VBox(0,10),
-	       1, gtkpack_(new Gtk::HBox(0,0),
-			   1, gtktext_insert(gtkset_editable($text, 1), "drakfont Future Overview
-        - Fonts import :
-                pfb ( Adobe Type 1 binary )
-                pfa ( Adobe Type 1 ASCII )
-                ttf ( True-Type  )
-                pcf.gz
-                Speedo
-                and Bitmap (PCF, BDF, and SNF)
-        - Features
-                - Install fonts from any directory
-                - Get windows fonts on any vfat partitions
-                - Get fonts on any partitions.
-                - UN-installation of any fonts (even if not installed through drakfont)
-        - Support
-              - Xfs
-              - ghostscript & printer
-              - Staroffice & printer
-              - abiword
-	      - netscape
-              - Koffice, Gnumeric, ... studying
-              - all fonts supported by printer
-              - anti-aliases by RENDER in Xfree86 .... 
-				supported by KDE.
-				will be supported by gnome 1.2.
-Visual Interface:
-        Window interface:
-          - Fontselectiondialog widget
-          - Command buttons under Fontselectiondialog (like the actual frontend).
-        Commands buttons:
-          - import from windows partition.
-                import from all fat32 partitions and look for winnt/windows/font
-                and import all (delete doublon) but don't import if already exist.
-          - import from directory
-                look for if it exist before for each font and not delete the original.
-                (replace all, no, none)
-                expert options:
-                        ask the directory, and look for if it exist before
-                        if it exist ask: (replace all, no, none)
-          - uninstall with list per font type
-        Expert additional switch
-          - option support:   ghostscript, Staroffice, etc...
-                check-button. (by default all check)
-          - Printer Application Fonts Support...
-
-
-"),
-			   0, new Gtk::VScrollbar($text->vadj),
-			   ),
-				 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					   gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { ${$central_widget}->destroy(); create_fontsel() }),
-					   ),
-				 )
-	    );
-    $central_widget = \$help_box;
-    $font_box->show_all();
-}
-
-sub appli_choice {
-    my $choice_box;
-    my $text = new Gtk::Text(undef, undef);
-    gtkpack($font_box,
-	    $choice_box = gtkpack_(new Gtk::HBox(0,10),
-				   0, new Gtk::VBox(0,10),
-				   0, new Gtk::VBox(0,10),
-				   1, gtkpack_(new Gtk::VBox(0,10),
-					       1, gtkpack_(new Gtk::VBox(0,10),
-							   1, gtkpack(new Gtk::HBox(0,10),
-								      new Gtk::HBox(0,10),
-								      _("Choose the applications that will support the fonts :"),
-								      new Gtk::HBox(0,10),),
-							   0, new Gtk::HBox(0,10),
-							   0, gtkpack_(new Gtk::HBox(0,10),
-								       0, _("Ghostscript"), 
-								       1, new Gtk::HBox(0,10),
-								       0, my $check11 = new Gtk::CheckButton(),),
-							   0, gtkpack_(new Gtk::HBox(0,10),
-								       0, _("StarOffice"),
-								       1, new Gtk::HBox(0,10),
-								       0, my $check22 = new Gtk::CheckButton(),),
-							   0, gtkpack_(new Gtk::HBox(0,10),
-								       0, _("Abiword"), 
-								       1, new Gtk::HBox(0,10),
-								       0, my $check33 = new Gtk::CheckButton(),),
-							   0, gtkpack_(new Gtk::HBox(0,10),
-								       0, _("Generic Printers"),
-								       1, new Gtk::HBox(0,10),
-								       0, my $check44 = new Gtk::CheckButton(),),
-							   ),
-					       0, gtkpack_(new Gtk::HBox(0,10),
-							   1, gtktext_insert(gtkset_editable($text, 0), _("Before installing any fonts, be sure that you have the right to use and install them on your system.\n\n-You can install the fonts using the normal way. In rare cases, bogus fonts may hang up your X Server.")),
-							   0, new Gtk::VScrollbar($text->vadj),
-							   0, new Gtk::VBox(0,10),
-							   ),
-					       0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-							 gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { 
-							     ${$central_widget}->destroy(); import_status() }),
-							 gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { 
-							     ${$central_widget}->destroy(); create_fontsel() }),
-							 ),
-					       ),
-				   0, new Gtk::VBox(0,10),
-				   0, new Gtk::VBox(0,10),
-				   ),
-
-	    );
-    foreach ([$check11, \$gs], [$check22, \$so], [$check33, \$abi], [$check44, \$printer]) {
-	my $ref = $_->[1];
-	gtksignal_connect(gtkset_active($_->[0], ${$ref}), toggled => sub { ${$ref} = ${$ref} ? 0 : 1; })
-	}
-    $central_widget = \$choice_box;
-    $font_box->show_all();
-}
-
-sub font_choice {
-    my $file_dialog;
-
-    $file_dialog = gtksignal_connect(new Gtk::FileSelection(_("File Selection")), destroy => sub { $file_dialog->destroy(); } );
-    $file_dialog->ok_button->signal_connect(clicked => \&file_ok_sel, $file_dialog);
-    $file_dialog->ok_button->child->set(_("Add"));
-    $file_dialog->cancel_button->signal_connect(clicked => sub { $file_dialog->destroy() });
-    $file_dialog->cancel_button->child->set(_("Close"));
-    $file_dialog->set_filename(_("Select the font file or directory and click on 'Add'"));
-    $file_dialog->show();
-}
-
-sub file_ok_sel { 
-    my ( $widget, $file_selection ) = @_;     
-    my $file_name = $file_selection->get_filename();
-    print "-- @install\n";
-    if(!member($file_name, @install)) {
-	push(@install, $file_name);
-	$list->add(gtkshow(new Gtk::ListItem($file_name)));
-    }
-}
-
-sub list_remove {
-    my($widget, $list) = @_;
-    my @to_remove;
-    push @to_remove, $list->child_position($_) foreach($list->selection);
-    splice @install, $_, 1 foreach(reverse sort @to_remove);
-    $list->remove_items($list->selection);
-}
-
-sub advanced_install {
-    my $scrolled_window;
-    my $adv_box;
-    $list = new Gtk::List();
-    $list->set_selection_mode(-extended);
-    
-    gtkpack($font_box,
-	    $adv_box = gtkpack_(new Gtk::VBox(0,10),
-				1, gtkpack_(new Gtk::HBox(0,4),
-					    1, createScrolledWindow($list),
-					    ),
-				0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					  gtksignal_connect(new Gtk::Button(_("Add")), clicked => sub { font_choice() }),
-					  gtksignal_connect(new Gtk::Button(_("Remove Selected")), clicked => \&list_remove, $list),
-					  gtksignal_connect(new Gtk::Button(_("Install List")), clicked => sub { 
-					      ${$central_widget}->destroy(); appli_choice()  }),
-					  ),
-				)
-	    );
-    $central_widget = \$adv_box;
-    $adv_box->show_all();
-}
-
-sub list_to_remove {
-    my @number_to_remove;
-    my @files_path = grep( !/fonts/ ,all($current_path));
-    Gtk->main_iteration while Gtk->events_pending;
-    push @number_to_remove, $path_list->child_position($_) foreach($path_list->selection);
-    @uninstall = ();
-    push @uninstall, $current_path . "/"  . $files_path[$_] foreach (@number_to_remove);
-    ${$central_widget}->destroy(); 
-    show_list_to_remove();
-}
-
-sub show_list_to_remove {
-    my $show_box;
-    my $show_list = new Gtk::List();
-    $show_list->add(gtkshow(new Gtk::ListItem($_))) foreach @uninstall ;
-    gtkpack($font_box,
-	    $show_box = gtkpack_(new Gtk::VBox(0,10),
-				 1, gtkpack_(new Gtk::HBox(0,4),
-					     1, createScrolledWindow($show_list)
-					     ),
-				 0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					   gtksignal_connect(new Gtk::Button(_("click here if you are sure.")), clicked => sub {  ${$central_widget}->destroy(); import_status_uninstall() }),
-					   gtksignal_connect(new Gtk::Button(_("here if no.")), clicked => sub {  ${$central_widget}->destroy(); create_fontsel() } ),
-					   ),
-				 )
-	    );
-    $central_widget = \$show_box;
-    $show_box->show_all();
-}
-
-sub uninstall {
-    my $scrolled_window;
-    my $scrolled_window2;
-    my $uninst_box;
-    @install=  ();
-    @installed_fonts_path = ();
-    list_fontpath();    
-    chk_empty_xfs_path();
-    $list_path = new Gtk::List();
-    $list_path->set_selection_mode(-extended);
-    foreach (@installed_fonts_path) {
-	my $t = $_;
-	$list_path->add(gtkshow(gtksignal_connect(new Gtk::ListItem($t), select => sub {
-	    $current_path = $t;
-	    $path_list->clear_items(0, -1);
-	    $path_list->append_items(map { /fonts/ ? () : gtkshow(new Gtk::ListItem($_)) } all($t)); })));
-    }
-    $list_path->set_selection_mode(-single);
-    $path_list = new Gtk::List();
-    $path_list->set_selection_mode(-extended);
-    
-    gtkpack($font_box,
-	    $uninst_box = gtkpack_(new Gtk::VBox(0,10),
-				   1, gtkpack_(new Gtk::HBox(0,4),
-					       1, createScrolledWindow($list_path),
-					       1, createScrolledWindow($path_list)
-					       ),
-				   0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -spread),
-					     gtksignal_connect(new Gtk::Button(_("Unselected All")), clicked => sub {$path_list->unselect_all (); }),
-					     gtksignal_connect(new Gtk::Button(_("Selected All")), clicked => sub {$path_list->select_all (); } ),
-					     gtksignal_connect(new Gtk::Button(_("Remove List")), clicked => sub { list_to_remove() }),
-					     ),
-				  )
-	    );
-    $central_widget = \$uninst_box;
-    $uninst_box->show_all();
-}
-
-sub import_status {
-    my $table;
-    $pbar =   new Gtk::ProgressBar;
-    $pbar1 =  new Gtk::ProgressBar;
-    $pbar2 =  new Gtk::ProgressBar;
-    $pbar3 =  new Gtk::ProgressBar;
-    gtkpack($font_box,
-	    $table = create_packtable({ col_spacings => 10, row_spacings => 50},
-   ["",""], 
-   [_("Initials tests"), $pbar, $pbar->{label} = new Gtk::Label(' ' )],
-   [_("Copy fonts on your system"), $pbar1,$pbar1->{label} = new Gtk::Label(' ' ) ],
-   [_("Install & convert Fonts"), $pbar2, $pbar2->{label} = new Gtk::Label(' ' ) ],
-   [_("Post Install"), $pbar3,$pbar3->{label} = new Gtk::Label(' ' ) ],
-				      ),
-	    );
-    $central_widget = \$table;
-    $font_box->show_all();
-    Gtk->main_iteration while Gtk->events_pending;
-    backend_mod();
-}
-
-sub import_status_uninstall {
-    my $table;
-    $pbar =   new Gtk::ProgressBar;
-    $pbar1 =  new Gtk::ProgressBar;
-    $pbar2 =  new Gtk::ProgressBar;
-    gtkpack($font_box,
-	    $table = create_packtable({ col_spacings => 10, row_spacings => 50},
-   ["",""], ["",""],
-   [_("Initials tests"), $pbar, $pbar->{label} = new Gtk::Label(' ' )],
-   [_("Remove fonts on your system"), $pbar1,$pbar1->{label} = new Gtk::Label(' ' ) ],
-   [_("Post Uninstall"), $pbar2,$pbar2->{label} = new Gtk::Label(' ' ) ],
-			    ),
-	    );
-    $central_widget = \$table;
-    $font_box->show_all();
-    Gtk->main_iteration while Gtk->events_pending;
-    backend_mod();
-}
-
-sub progress {
-    my ($progressbar, $incr, $label_text) = @_;
-    my($new_val) = $progressbar->get_current_percentage;
-    $new_val += $incr;
-    if ($new_val > 1) {$new_val = 1}
-    $progressbar->update($new_val);
-    $progressbar->{label}->set($label_text);
-    Gtk->main_iteration while Gtk->events_pending;
-}
-
-
-
diff --git a/perl-install/standalone/drakgw b/perl-install/standalone/drakgw
deleted file mode 100755
index cc35a1dc2..000000000
--- a/perl-install/standalone/drakgw
+++ /dev/null
@@ -1,767 +0,0 @@
-#!/usr/bin/perl
-
-#
-# Guillaume Cottenceau (gc@mandrakesoft.com)
-#
-# Copyright 2000, 2001, 2002 MandrakeSoft
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2, as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use detect_devices;
-use interactive;
-use log;
-use c;
-use network::netconnect;
-
-$::isInstall and die "Not supported during install.\n";
-
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakgw [--version]\n";
-/-version/ and die 'version: $Id$ '."\n";
-$::Wizard_pix_up = "wiz_drakgw.png";
-$::Wizard_title = _("Internet Connection Sharing");
-$::direct = /-direct/;
-
-
-my $sysconf_network = "/etc/sysconfig/network";
-my $sysconf_dhcpd = "/etc/sysconfig/dhcpd";
-my $rc_firewall_generic = "/etc/rc.d/rc.firewall";
-my $rc_firewall_drakgw = "/etc/rc.d/rc.firewall.inet_sharing";
-my $rc_firewall_24 = "/etc/rc.d/rc.firewall.inet_sharing-2.4";
-my $dhcpd_conf = "/etc/dhcpd.conf";
-my $cups_conf = "/etc/cups/cupsd.conf";
-my $drakgw_setup = "/etc/sysconfig/inet_sharing";
-
-
-my $in = 'interactive'->vnew('su', 'default');
-
-!$::isEmbedded && $in->isa('interactive_gtk') and $::isWizard=1;
-
-pur_gtk_mode() if $::isEmbedded && $in->isa('interactive_gtk');
-
-sub sys { system(@_) == 0 or log::l("[drakgw] Warning, sys failed for $_[0]") }
-
-sub outpend { 
-    standalone::explanations("modified file $_[0]");
-    my $f = shift; local *F; open F, ">>$f" or die "outpend in file $f failed: $!\n"; print F foreach @_;
-}
-
-sub start_daemons ()
-{
-    my $cups_used = 0;
-    standalone::explanations("Starting daemons");
-    if (-f "/etc/rc.d/init.d/cups") {
-        if (system("/etc/rc.d/init.d/cups status >/dev/null") == 0) {
-           $cups_used = 1;
-           sys("/etc/rc.d/init.d/cups stop");
-        }
-    }
-    system("/etc/rc.d/init.d/dhcpd status >/dev/null") == 0 and sys("/etc/rc.d/init.d/dhcpd stop");
-    system("/etc/rc.d/init.d/named status >/dev/null 2>/dev/null") == 0 and sys("/etc/rc.d/init.d/named stop");
-
-    my $netmon = '/usr/sbin/net_monitor';
-    my $netmon_need_start;
-    if (-x $netmon && `$netmon --status` eq 1) {
-	$netmon_need_start = 1;
-	system("$netmon --disconnect --force --quiet >/dev/null");
-    }
-    sys("/etc/rc.d/init.d/network restart");
-    $netmon_need_start and system("$netmon --connect --force --quiet >/dev/null");
-
-    sys("sh $rc_firewall_generic");
-
-    sys("/etc/rc.d/init.d/$_ start"), sys("/sbin/chkconfig --level 345 $_ on") foreach 'named', 'dhcpd';
-    sys("/etc/rc.d/init.d/cups start") if $cups_used;
-
-    substInFile { s/^INET_SHARING.*\n//; $_ .= "INET_SHARING=enabled\n" if eof } $drakgw_setup;
-}
-
-sub stop_daemons ()
-{
-    standalone::explanations("Stopping daemons");
-    system("/etc/rc.d/init.d/dhcpd status >/dev/null") == 0 and sys("/etc/rc.d/init.d/dhcpd stop");
-    system("/etc/rc.d/init.d/named status >/dev/null 2>/dev/null") == 0 and sys("/etc/rc.d/init.d/named stop");
-    sys("/sbin/iptables -t nat -F");
-    sys("/sbin/chkconfig --level 345 $_ off") foreach 'named', 'dhcpd';
-
-    substInFile { s/^INET_SHARING.*\n//; $_ .= "INET_SHARING=disabled\n" if eof } $drakgw_setup;
-}
-
-sub fatal_quit ($)
-{
-    log::l("[drakgw] FATAL: $_[0]");
-    undef $wait_configuring;
-    $in->ask_warn('', $_[0]);
-    quit_global($in, -1);
-}
-
-my ($kernel_version) = c::kernel_version() =~ /(...)/;
-log::l("[drakgw] kernel_version $kernel_version");
-
-$kernel_version eq '2.4' or fatal_quit(_("Sorry, we support only 2.4 kernels."));
-
-
-begin:
-
-#- **********************************
-#- * 0th step: verify if we are already set up
-
-if (-f $drakgw_setup) {
-    $::Wizard_no_previous = 1;
-
-    if (grep(/enabled/, cat_($drakgw_setup))) {
-	my $r = $in->ask_from_list_(_("Internet Connection Sharing currently enabled"),
-_("The setup of Internet connection sharing has already been done.
-It's currently enabled.
-
-What would you like to do?"),
-				   [ __("disable"), __("reconfigure"), __("dismiss") ]) or quit_global($in, 0);
-	if ($r eq "disable") {
-	    {
-		my $wait_disabl = $in->wait_message('', _("Disabling servers..."));
-		stop_daemons();
-	    }
-	    foreach ($dhcpd_conf, $rc_firewall_24) {
-		renamef($_, "$_.drakgwdisable") or die "Could not rename $_ to $_.drakgwdisable" 
-	    }
-	    log::l("[drakgw] Disabled");
-	    $::Wizard_finished = 1;
-	    $in->ask_okcancel('', _("Internet connection sharing is now disabled."));
-	    quit_global($in, 0);
-	}
-	if ($r eq "dismiss") {
-	    quit_global($in, 0);
-	}
-    }
-    elsif (grep(/disabled/, cat_($drakgw_setup)))
-    {
-	my $r = $in->ask_from_list_(_("Internet Connection Sharing currently disabled"),
-_("The setup of Internet connection sharing has already been done.
-It's currently disabled.
-
-What would you like to do?"),
-				   [ __("enable"), __("reconfigure"), __("dismiss") ]);
-	if ($r eq "enable") {
-	    foreach ($dhcpd_conf, $rc_firewall_24) {
-		rename($_, "$_.old") if -f $_;
-		rename("$_.drakgwdisable", $_) or die "Could not find configuration. Please reconfigure.";
-	    }
-	    {
-		my $wait_enabl = $in->wait_message('', _("Enabling servers..."));
-		start_daemons();
-	    }
-            log::l("[drakgw] Enabled");
-	    $::Wizard_finished = 1;
-	    $in->ask_okcancel('', _("Internet connection sharing is now enabled."));
-	    quit_global($in, 0);
-	}
-	if ($r eq "dismiss") {
-	    quit_global($in, 0);
-	}
-    }
-    else {
-	log::l("[drakgw] Warning, unrecognized config file, ignoring");
-	renamef($drakgw_setup, "$drakgw_setup.unrecognized");
-    }
-}
-
-
-#- **********************************
-#- * 1st step: detect/setup
-step_ask_confirm:
-
-$::Wizard_no_previous = 1;
-    
-$::direct or $in->ask_okcancel(_("Internet Connection Sharing"),
-_("You are about to configure your computer to share its Internet connection.
-With that feature, other computers on your local network will be able to use this computer's Internet connection.
-
-Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."), 1) or quit_global($in, 0);
-
-undef $::Wizard_no_previous;
-
-
-step_detectsetup:
-
-my @configured_devices = map { /ifcfg-(\S+)/ } glob('/etc/sysconfig/network-scripts/ifcfg*');
-
-my %aliased_devices; 
-/^\s*alias\s+(eth[0-9])\s+(\S+)/ and $aliased_devices{$1} = $2 foreach cat_("/etc/modules.conf");
-
-my $card_netconnect = network::netconnect::get_net_device();
-defined $card_netconnect and log::l("[drakgw] Information from netconnect: ignore card $card_netconnect");
-
-my @cards = grep {
-    log::l("[drakgw] Have network card: $_");
-    $_ ne $card_netconnect
-} detect_devices::getNet();
-log::l("[drakgw] Available network cards: ", join(", ", @cards));
-
-my $format = sub {
-    $aliased_devices{$_[0]} ?
-      _("Interface %s (using module %s)", $_[0], $aliased_devices{$_[0]}) :
-      _("Interface %s", $_[0]);
-};
-
-#- setup the network interface we shall use
-
-my $device;
-if (!@cards)
-{
-    $in->ask_warn(_("No network adapter on your system!"), 
-		  _("No ethernet network adapter has been detected on your system. Please run the hardware configuration tool."));
-    quit_global($in, 0);
-}
-elsif (@cards == 1)
-{
-    $device = $cards[0];
-    $in->ask_okcancel(_("Network interface"),
-_("There is only one configured network adapter on your system:
-
-%s
-
-I am about to setup your Local Area Network with that adapter.", $format->($device)), 1) or goto step_ask_confirm;
-}
-else
-{
-    $device = $in->ask_from_listf(_("Choose the network interface"),
-				    _("Please choose what network adapter will be connected to your Local Area Network."),
-				     $format,
-				    \@cards,
-				    ) or goto step_ask_confirm;
-    defined $device or quit_global($in, 0);
-}
-standalone::explanations("Choosing network device: $device");
-
-
-my $lan_address = "192.168.0.0";
-my $server_ip = "192.168.0.1";
-
-my $reconf_dhcp_server_intf = 1;
-
-if (grep(/$device/, @configured_devices)) {
-  step_warning_already_conf:
-    my $auto = _('Yes');
-    my $conf = network::read_interface_conf("/etc/sysconfig/network-scripts/ifcfg-$device");
-    $in->ask_from(_("Network interface already configured"),
-		  _("Warning, the network adapter (%s) is already configured.
-
-Do you want an automatic re-configuration?
-
-You can do it manually but you need to know what you're doing.", $device),
-		  [ { label => _("Automatic reconfiguration"), val => \$auto, list => [ _('Yes'), _('No (experts only)') ] },
-		    { val => _("Show current interface configuration"), clicked =>
-		      sub { $in->ask_warn(_('Current interface configuration'),
-					  _("Current configuration of `%s':
-
-Network: %s
-IP address: %s
-IP attribution: %s
-Driver: %s", $device, $conf->{NETWORK}, $conf->{IPADDR}, $conf->{BOOTPROTO}, $aliased_devices{$device} || '(unknown)')) } } ]) or goto step_detectsetup;
-    
-    if ($auto ne _('Yes')) {
-	$reconf_dhcp_server_intf = 0;
-	$server_ip = $conf->{IPADDR};
-	$lan_address = $conf->{NETWORK};
-	$in->ask_from('',
-		      _("I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the C-Class Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.
-
-Else, I can reconfigure your interface and (re)configure a DHCP server for you.
-
-", $device),
-		      [ { label => _("C-Class Local Network"), val => \$lan_address, type => 'entry' },
-			{ label => _("(This) DHCP Server IP"), val => \$server_ip, type => 'entry' },
-			{ label => _("Re-configure interface and DHCP server"), val => \$reconf_dhcp_server_intf, type => 'bool' } ])
-	  or goto step_warning_already_conf;
-    }
-}
-    
-if (!($lan_address =~ s/\.0$//)) {
-    $in->ask_warn('', 
-		  _("The Local Network did not finish with `.0', bailing out."));
-    quit_global($in, 0);
-}
-standalone::explanations("Using LAN address <$lan_address>");
-
-
-#- test for potential conflict with other networks
-
-foreach (grep { $_ ne $device } @configured_devices)
-{
-    grep(/$lan_address/, cat_("/etc/sysconfig/network-scripts/ifcfg-$_")) and
-      ($in->ask_warn('', _("Potential LAN address conflict found in current config of %s!\n", $_)) or goto step_detectsetup);
-}
-
-
-#- test for potential conflict with previous firewall config
-
-system('modprobe iptable_nat');
-if (-f '/etc/sysconfig/iptables' || -x '/sbin/iptables' && listlength(`/sbin/iptables -t nat -nL`) > 8) {
-    $in->ask_okcancel(_("Firewalling configuration detected!"),
-		      _("Warning! An existing firewalling configuration has been detected. You may need some manual fix after installation.")) or goto step_detectsetup;
-}
-
-
-#- **********************************
-#- * 2nd step: configure
-
-$wait_configuring = $in->wait_message(_("Configuring..."), 
-				      _("Configuring scripts, installing software, starting servers..."));
-
-
-#- setup the /etc/sysconfig/network-script/ script
-
-if ($reconf_dhcp_server_intf) {
-    standalone::explanations("Reconfiguring network parameters of $device");
-    my $network_scripts = "/etc/sysconfig/network-scripts";
-    my $ifcfg = "$network_scripts/ifcfg-$device";
-    renamef($ifcfg, "$network_scripts/old.ifcfg-$device");
-    output($ifcfg, qq(DEVICE=$device
-BOOTPROTO=static
-IPADDR=$server_ip
-NETMASK=255.255.255.0
-NETWORK=$lan_address.0
-BROADCAST=$lan_address.255
-ONBOOT=yes
-));
-}
-
-
-#- install and setup the RPM packages
-
-my $rpms_to_install;
-my %rpm2file = (  iptables => '/sbin/iptables',
-		 'dhcp-server' => '/usr/sbin/dhcpd',
-		 bind => '/usr/sbin/named',
-		 'caching-nameserver' => '/var/named/named.local');
-
-#- first: try to install all in one step
-my @needed_to_install = grep { !-e $rpm2file{$_} } keys %rpm2file;
-@needed_to_install and $in->do_pkgs->install(@needed_to_install);
-#- second: try one by one if failure detected
-if (grep { !-e $rpm2file{$_} } keys %rpm2file) {
-    foreach (keys %rpm2file) {
-	-e $rpm2file{$_} or $in->do_pkgs->install($_);
-	-e $rpm2file{$_} or fatal_quit(_("Problems installing package %s", $_));
-    }
-}
-
-
-#- setup the masquerading configuration
-standalone::explanations("Modifying firewalling configuration");
-if (!-f $rc_firewall_generic) {
-    output($rc_firewall_generic, "#!/bin/sh
-#
-# Automatically generated by drakgw
-[ -x $rc_firewall_drakgw ] && $rc_firewall_drakgw
-");
-    chmod 0700, $rc_firewall_generic;
-}
-elsif (!grep(/drakgw/, cat_($rc_firewall_generic))) {
-    outpend($rc_firewall_generic, "
-# Automatically added by drakgw
-[ -x $rc_firewall_drakgw ] && $rc_firewall_drakgw
-
-");
-}
-
-output($rc_firewall_drakgw, q(#!/bin/sh
-KERNELMAJ=`uname -r | sed                   -e 's,\..*,,'`
-KERNELMIN=`uname -r | sed -e 's,[^\.]*\.,,' -e 's,\..*,,'`
-
-if [ "$KERNELMAJ" -eq 2 -a "$KERNELMIN" -eq 4 ]; then
-    [ -x ) . $rc_firewall_24 . ' ] && ' . $rc_firewall_24 . q(
-fi
-    ));
-
-chmod 0700, $rc_firewall_drakgw;
-
-
-output($rc_firewall_24, qq(#!/bin/sh
-# Load the NAT module (this pulls in all the others).
-modprobe iptable_nat
-
-# Turn on IP forwarding
-echo 1 > /proc/sys/net/ipv4/ip_forward
-
-# In the NAT table (-t nat), Append a rule (-A) after routing (POSTROUTING)
-# which says to MASQUERADE the connection (-j MASQUERADE).
-/sbin/iptables -t nat -A POSTROUTING -s $lan_address.0/24 -j MASQUERADE
-
-# Allows forwarding specifically to our LAN
-/sbin/iptables -A FORWARD -s $lan_address.0/24 -j ACCEPT
-
-# Allow dhcp requests
-/sbin/iptables -A INPUT -i $device -p udp --sport bootpc --dport bootps -j ACCEPT
-/sbin/iptables -A INPUT -i $device -p tcp --sport bootpc --dport bootps -j ACCEPT
-/sbin/iptables -A INPUT -i $device -p udp --sport bootps --dport bootpc -j ACCEPT
-/sbin/iptables -A INPUT -i $device -p tcp --sport bootps --dport bootpc -j ACCEPT
-
-# Allow dns requests
-/sbin/iptables -A INPUT -i $device -p udp --dport domain -j ACCEPT
-/sbin/iptables -A INPUT -i $device -p tcp --dport domain -j ACCEPT
-));
-chmod 0700, $rc_firewall_24;
-
-
-#- be sure that FORWARD_IPV4 is enabled in /etc/sysconfig/network
-
-substInFile { s/^FORWARD_IPV4.*\n//; $_ .= "FORWARD_IPV4=true\n" if eof } $sysconf_network;
-
-
-#- setup the DHCP server
-
-if ($reconf_dhcp_server_intf) {
-    standalone::explanations("Configuring a DHCP server on $lan_address.0");
-    renamef($dhcpd_conf, "$dhcpd_conf.old");
-    output($dhcpd_conf, qq(subnet $lan_address.0 netmask 255.255.255.0 {
-	# default gateway
-	option routers $server_ip;
-	option subnet-mask 255.255.255.0;
-
-	option domain-name "homelan.org";
-	option domain-name-servers $server_ip;
-
-	range dynamic-bootp $lan_address.16 $lan_address.253;
-	default-lease-time 21600;
-	max-lease-time 43200;
-}
-));
-}
-
-my $update_dhcp = '/usr/sbin/update_dhcp.pl';
--e $update_dhcp and system($update_dhcp);
-
-
-#- put the interface for the dhcp server in the sysconfig-dhcp config, for the /etc/init.d script of dhcpd
-
-substInFile { s/^INTERFACES\n//; $_ .= "INTERFACES=\"$device\"\n" if eof } $sysconf_dhcpd;
-
-
-#- Set up /etc/cups/cupsd.conf to make the broadcasting of the printer info
-#- working correctly: 
-#- 
-#-  1. ServerName <server's IP address>  # because clients do necessarily 
-#-                                       # know the server's name
-#-
-#-  2. BrowseAddress <server's Broadcast IP> # broadcast printer info into
-#-                                           # the local network.
-#-
-#-  3. BrowseOrder Deny,Allow
-#-     BrowseDeny All
-#-     BrowseAllow <IP mask for local net> # Only accept broadcast signals 
-#-                                         # coming from local network
-#-
-#-  4. <Location />
-#-     Order Deny,Allow
-#-     Deny From All
-#-     Allow From <IP mask for local net> # Allow only machines of local 
-#-     </Location>                        # network to access the server
-#-     
-#- These steps are only done when the CUPS package is installed.
-
-#- Modify the root location block in /etc/cups/cupsd.conf
-
-if (-f $cups_conf) {
-    standalone::explanations("Updating CUPS configuration accordingly");
-
-    substInFile {
-        s/^ServerName[^:].*\n//; $_ .= "ServerName $server_ip\n" if eof;
-        s/^BrowseAddress.*\n//; $_ .= "BrowseAddress $lan_address.255\n" if eof;
-        s/^BrowseOrder.*\n//; $_ .= "BrowseOrder Deny,Allow\n" if eof;
-        s/^BrowseDeny.*\n//; $_ .= "BrowseDeny All\n" if eof;
-        s/^BrowseAllow.*\n//; $_ .= "BrowseAllow $lan_address.*\n" if eof;
-    } $cups_conf;
-
-    my @cups_conf_content = cat_($cups_conf);
-    my @root_location; my $root_location_start; my $root_location_end;
-
-    # Cut out the root location block so that it can be treated seperately
-    # without affecting the rest of the file
-    if (grep(m|^\s*<Location\s+/\s*>|, @cups_conf_content)) {
-	$root_location_start = -1;
-	$root_location_end = -1;
-	# Go through all the lines, bail out when start and end line found
-	for (my $i = 0; $i < @cups_conf_content && $root_location_end == -1; $i++) {
-	    if ($cups_conf_content[$i] =~ m|^\s*<\s*Location\s+/\s*>|) {
-		$root_location_start = $i;
-	    } elsif (($cups_conf_content[$i] =~ m|^\s*<\s*/Location\s*>|) && ($root_location_start != -1)) {
-		$root_location_end = $i;
-	    }
-	}
-	# Rip out the block and store it seperately
-	@root_location = splice(@cups_conf_content, $root_location_start, $root_location_end - $root_location_start + 1);
-    } else {
-	# If there is no root location block, create one
-	$root_location_start = @cups_conf_content;
-	@root_location = ("<Location />\n", "</Location>\n");
-    }
- 
-    # Delete all former "Order", "Allow", and "Deny" lines from the root location block
-    s/^\s*Order.*//, s/^\s*Allow.*//, s/^\s*Deny.*// foreach @root_location;
- 
-    # Add the new "Order" and "Deny" lines, add an "Allow" line for the local network
-    splice(@root_location, -1, 0, $_) foreach ("Order Deny,Allow\n", "Deny From All\n", "Allow From 127.0.0.1\n",
-					       "Allow From $lan_address.*\n");
- 
-    # Put the changed root location block back into the file
-    splice(@cups_conf_content, $root_location_start, 0, @root_location);
- 
-    output $cups_conf, @cups_conf_content;
-}
-
-
-#- start the daemons
-
-substInFile { s/^INTERFACE.*\n//; $_ .= "INTERFACE=$device\n" if eof } $drakgw_setup;
-start_daemons();
-
-
-#- bye-bye message
-
-undef $wait_configuring;
-
-$::Wizard_no_previous = 1;
-$::Wizard_finished = 1;
-
-$in->ask_okcancel(_("Congratulations!"), 
-_("Everything has been configured.
-You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP)."));
-
-
-log::l("[drakgw] Installation complete, exiting");
-quit_global($in, 0);
-
-sub quit_global {
-    my ($in, $exitcode) = @_;
-    $in->exit($exitcode);
-    goto begin
-}
-
-sub pur_gtk_mode
-{
-    require Gtk;
-    init Gtk;
-    my $setup_state = grep(/disabled/, cat_($drakgw_setup)) ? _("The setup has already been done, but it's currently disabled.") :
-                      grep(/enabled/, cat_($drakgw_setup))  ? _("The setup has already been done, and it's currently enabled.") :
-                      _("No Internet Connection Sharing has ever been configured.");
-    
-    my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-    $window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-    $window1->set_position(1);
-    $window1->set_title(_("Internet connection sharing configuration"));
-    $window1->border_width(10);
-    my $vbox1 = new Gtk::VBox(0,0);
-    $window1->add($vbox1);
-    my $hbox1 = new Gtk::HBox(0,0);
-    $vbox1->pack_start($hbox1,1,1,0);
-    my $label1 = new Gtk::Label(
-_("Welcome to the Internet Connection Sharing utility!
-
-%s
-
-Click on Configure to launch the setup wizard.", $setup_state));
-    $hbox1->pack_start($label1,1,1,0);
-    my $hbox2 = new Gtk::HBox(0,0);
-    $vbox1->pack_start($hbox2,1,1,0);
-    
-    my $bbox1 = new Gtk::HButtonBox;
-    $vbox1->pack_start($bbox1,0,0,0);
-    $bbox1->set_layout(-end);
-    my $button_conf = new Gtk::Button _("Configure");
-    $button_conf->signal_connect ( clicked => sub {
-				       system("/usr/sbin/drakgw --wizard");
-				       kill(USR1, $::CCPID);
-				   });
-    $bbox1->add($button_conf);
-    my $button_cancel = new Gtk::Button _("Cancel");
-    $button_cancel->signal_connect ( clicked => sub {
-					 kill(USR1, $::CCPID);
-				     });
-    $bbox1->add($button_cancel);
-    $window1->show_all();
-    Gtk->main_iteration while Gtk->events_pending;
-    $::isEmbedded and kill USR2, $::CCPID;
-    Gtk->main;
-    Gtk->exit(0);
-    
-}
-
-
-#-------------------------------------------------
-#- $Log$
-#- Revision 1.61  2002/04/09 08:50:36  gc
-#- time to remove ipchains/2.2 stuff since now ipchains and iptables
-#- packages conflict
-#-
-#- Revision 1.60  2002/03/07 13:10:06  gc
-#- - call net_monitor to disable internet
-#-   connection before network-restart
-#- - user return value when status'ing the
-#-   initscripts rather than grepping their
-#-   text output
-#-
-#- Revision 1.59  2002/02/22 18:58:22  gc
-#- exit the pur_gtk version after launching the wizard version
-#-
-#- Revision 1.58  2002/01/18 20:19:44  gc
-#- - move 'use standalone' up to comply to 'explanations'
-#- - write higher-level 'explanations'
-#- - small fix, s/`ls ..`/glob(..)/
-#-
-#- Revision 1.57  2001/12/17 17:58:20  gc
-#- drakgw for gold
-#-
-#- Revision 1.56  2001/10/30 19:10:41  gc
-#- use isa rather than ref to test if we're gtk
-#-
-#- Revision 1.55  2001/10/02 10:28:14  gc
-#- don't call pkgs_install when no package needs to be installed
-#-
-#- Revision 1.54  2001/09/18 20:36:20  damien
-#- debug
-#-
-#- Revision 1.53  2001/09/12 10:57:01  damien
-#- corrected wizard mode in newt mode
-#-
-#- Revision 1.52  2001/09/06 15:38:09  gc
-#- works now ;p
-#-
-#- Revision 1.51  2001/08/29 21:52:34  gc
-#- quit_global
-#-
-#- Revision 1.50  2001/08/18 00:06:32  siegel
-#- fixed i18n
-#-
-#- Revision 1.49  2001/08/09 09:35:37  gc
-#- use vnew the right way everywhere
-#-
-#- Revision 1.48  2001/08/09 09:15:38  gc
-#- - if package installs fail, redo one by one to know which one failed
-#- - try to not end up with a failing configuration file, if program is brutally stopped
-#- - if unrecognized config file, don't fail, rather ignore it and proceed
-#- - run dhcpd_update feature (if present) after setup of dhcp server
-#-
-#- Revision 1.47  2001/08/08 18:26:31  prigaux
-#- add interactive_pkgs stuff
-#-
-#- Revision 1.46  2001/08/06 13:11:35  yduret
-#- use MDK::Common;
-#- use network::netconnect; and update functions call from netconnect
-#-
-#- Revision 1.45  2001/07/24 22:39:28  prigaux
-#- move to MDK::Common, bool->to_bool
-#-
-#- Revision 1.44  2001/05/16 11:13:21  damien
-#- added icon management
-#-
-#- Revision 1.43  2001/05/15 14:36:31  gc
-#- full path for iptables
-#-
-#- Revision 1.42  2001/04/12 13:50:24  gc
-#- add some rule so later on tinyfirewall will not prevent everything from working
-#-
-#- Revision 1.41  2001/04/11 15:28:36  gc
-#- kosmetik
-#-
-#- Revision 1.40  2001/04/11 15:16:34  gc
-#- do i18n for title also
-#-
-#- Revision 1.39  2001/04/10 21:33:15  gc
-#- add INTERFACE param in sysconfig parameter for smooth interoperation with bastille-firewall
-#-
-#- Revision 1.38  2001/04/09 18:09:38  yduret
-#- deyvounification : remove some un-useful comments in code
-#-
-#- Revision 1.37  2001/04/09 16:29:20  gc
-#- do not die when an initscript returns non-0 (initscripts too buggy)
-#-
-#- Revision 1.36  2001/04/09 11:39:40  gc
-#- fix for when there is an already existing rc.firewall
-#- complies with old format of drakgw so that upgrades will work
-#-
-#- Revision 1.35  2001/04/08 05:33:14  damien
-#- updated
-#-
-#- Revision 1.34  2001/04/06 15:09:15  yduret
-#- swap cancel/configure button
-#-
-#- Revision 1.33  2001/04/06 14:12:06  gc
-#- - correct yvounetification in i18n stuff
-#- - remove some remaining debugging printings
-#- - add a bit more of explanations when starting drakgw in wizard mode
-#-
-#- Revision 1.32  2001/04/06 01:34:44  yduret
-#- recoded a embedded && gtk mode
-#-
-#- Revision 1.31  2001/03/31 14:21:10  pablo
-#- Updated po files and help messages (patch from Pixel)
-#-
-#- Revision 1.30  2001/03/29 11:52:15  damien
-#- updated for new wiz png policy
-#-
-#- Revision 1.29  2001/03/26 15:29:01  gc
-#- first attempt at pixelization of code (till's cups patches)
-#-
-#- Revision 1.28  2001/03/21 18:07:36  gc
-#- honour embedded mode
-#-
-#- Revision 1.27  2001/03/13 16:23:29  gc
-#- fix for bind
-#-
-#- Revision 1.26  2001/03/13 15:31:05  gc
-#- - fix destructive parts of pixelization
-#- - fix some own bugs
-#-
-#- Revision 1.25  2001/03/13 00:00:11  prigaux
-#- pixelization
-#-
-#- Revision 1.24  2001/03/12 18:26:16  gc
-#- - make it work as a wizard
-#- - make it work with iptables (kernel-2.4)
-#-
-#- Revision 1.23  2001/03/01 00:18:17  damien
-#- updated embedded mode
-#-
-#- Revision 1.22  2001/02/26 18:39:12  prigaux
-#- pixelization
-#-
-#- Revision 1.21  2001/02/08 10:11:37  damien
-#- implemented or updated embedded mode
-#-
-#- Revision 1.20  2001/02/08 07:00:41  damien
-#- added embedded and (ugly) wizard mode.
-#-
-#- Revision 1.19  2001/01/10 00:32:42  prigaux
-#- use standalone and standalone::pkgs_install
-#-
-#- Revision 1.18  2000/12/16 16:13:34  prigaux
-#- use ldetect-lst
-#-
-#- Revision 1.17  2000/11/13 15:48:33  gc
-#- Integrate Till's patches for better work with Cups.
-#-
-#- Revision 1.16  2000/10/10 15:31:50  gc
-#- make only one call to urpmi in order to install all the needed rpm's
-#-
diff --git a/perl-install/standalone/drakproxy b/perl-install/standalone/drakproxy
deleted file mode 100755
index 07f624bbe..000000000
--- a/perl-install/standalone/drakproxy
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/usr/bin/perl
-
-# DrakNet
-
-# Copyright (C) 1999 MandrakeSoft (damien@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-use interactive;
-use network::network;
-
-$::o->{miscellaneous} ||= {};
-$::o->{miscellaneous} = { getVarsFromSh('/etc/profile.d/proxy.sh') };
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-my $in = 'interactive'->vnew('su', 'network');
-network::network::miscellaneousNetwork($in, 1, 1);
-any::miscellaneousNetwork('');
-$in->exit(0);
-
diff --git a/perl-install/standalone/draksec b/perl-install/standalone/draksec
deleted file mode 100755
index ca7337c81..000000000
--- a/perl-install/standalone/draksec
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/usr/bin/perl
-
-# DrakSec
-
-# Copyright (C) 2002 MandrakeSoft (cbelisle@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use interactive;
-use any;
-use c;
-use security::msec;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: draksec [--expert]\n";
-
-$::expert = /-expert/ || cat_("/etc/sysconfig/system") =~ /^CLASS="?expert/m; #"
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-my $in = 'interactive'->vnew('su', 'security');
-
-begin:
-$::isEmbedded and kill USR2, $::CCPID;
-
-my $security = any::get_secure_level('');
-my $libsafe = any::config_libsafe('');
-my @logins = security::msec::get_user_list('');
-my $email = "put.your\@email.here";
-my $w;
-my (@options) = security::msec::get_config('', $security);
-
-my $expert_file = "/etc/security/msec/expert_mode";
-my $expert_section = "";
-
-#for $href (@options) {
-#    for $href2 (keys %$href) {
-#	    %noref = %$href;
-#            print "$href2 = $noref{$href2}{description}\n";
-#    }
-#}
-
-if (any::choose_security_level($in, \$security, \$libsafe, \$email)) {
-    any::config_libsafe('', $libsafe);
-
-    $w = $in->wait_message('', _("Setting security level"));
-    $in->suspend;
-    $ENV{LILO_PASSWORD} = ''; # make it non interactive
-    system "/usr/sbin/msec", $security;
-    $in->resume;
-
-    $w = $in->wait_message('', _("Setting security user"));
-    $in->suspend;
-    security::msec::add_config('', "set_security_conf", "MAIL_USER", $email);
-    security::msec::commit_changes('');
-    $in->resume;
-}
-
-while (-f $expert_file) {
-    $expert_section = cat_($expert_file);
-
-    %config_hash = %{ $options[$expert_section] };
-   
-#    foreach $key (keys %config_hash) {
-#        print "$key = $config_hash{$key}{val}\n";
-#    }
-
-    if(any::choose_security_options($in, $security, $libsafe, \$email, \%config_hash)) {
-       $w = $in->wait_message('', _("Setting security options"));
-       $in->suspend;
-       $in->resume;
-    }
-
-    rm_rf($expert_file);
-}
-
-!$::isEmbedded ? $in->exit(0) : kill(USR1, $::CCPID);
-goto begin;
diff --git a/perl-install/standalone/drakxservices b/perl-install/standalone/drakxservices
deleted file mode 100755
index f5249475b..000000000
--- a/perl-install/standalone/drakxservices
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use interactive;
-use services;
-use log;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: drakxservices\n";
-
-
-my $in = 'interactive'->vnew('su', 'services');
-begin:
-my $l = services::ask($in);
-services::doit($in, $l) if $l;
-!$::isEmbedded and $in->exit(0);
-kill USR1, $::CCPID;
-goto begin;
diff --git a/perl-install/standalone/drakxtv b/perl-install/standalone/drakxtv
deleted file mode 100755
index 16b64ecec..000000000
--- a/perl-install/standalone/drakxtv
+++ /dev/null
@@ -1,166 +0,0 @@
-#!/usr/bin/perl -w
-# DrakxTV
-# $Id$
-
-# Copyright (C) 2002 MandrakeSoft (tvignaud@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# If we ever want to autoconf the tv card at install time, we should
-# make a package out of this.
-# Maybe we'll have to for harddrake2
-#
-#package tvdrake;
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use strict;
-use detect_devices;
-use lang;
-use log;
-use common;
-
-("@ARGV" =~ /--help|-h/) and die "usage: drakxtv [-h] [--help] [--no-guess]\n";
-
-#$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-my $in = 'interactive'->vnew();
-
-sub scan4channels {
-#    xawtv has been installed by DrakX when/if it's detected a
-#    tv card.
-#    In the future, we might try to install xawtv if it'sn't there
-#    as we're just a, xawtv wraper
-#    -x "/usr/bin/scantv" or $in->do_pkgs->install('xawtv');
-#    -x "/usr/bin/scantv" or { 
-#{	   exec {'consolehelper'} $0, ("urpmi", "xawtv") or die _("consolehelper missing");
-#    };
-    if (! -x "/usr/bin/scantv") {
-#	standalone::explanations("package xawtv isn't installed");
-	   $in->ask_warn("XawTV isn't installed!", 
-				  formatAlaTeX(_("XawTV isn't installed!
-
-
-If you do have a TV card but DrakX has neither detected it (no bttv
-module in \"/etc/modules\") nor installed xawtv, please send the
-results of \"lspcidrake -v -f\" to \"install\@mandrakesoft.com\"
-with subject \"undetected TV card\".
-
-
-You can install it by typing \"urpmi xawtv\" as root, in a console.")));
-	   
-    } else {
-	   my ($ftable_id, $norm);
-
-#   my %freqtables = map {$i=$_;$i =~ s/ (.*)/-\1/;_($_) => $i} (...)
-#   this table must be checked on each xawtv release :
-	   my %freqtables = 
-		  ("us-bcast" => _("USA (broadcast)"), "us-cable" => _("USA (cable)"), "us-cable-hrc" => _("USA (cable-hrc)"), "canada-cable" => _("Canada (cable)"),
-		   "japan-bcast" => _("Japan (broadcast)"), "japan-cable" => _("Japan (cable)"), "china-bcast" => _("China (broadcast)"),
-		   "europe-west" => _("West Europe"), "europe-east" => _("East Europe"), "italy" => _("Italy"), "ireland" => _("Ireland"), "france" => _("France [SECAM]"),
-		   "newzealand" => _("Newzealand"), "australia" => _("Australia"),
-		   "southafrica" => _("South Africa"),
-		   "argentina" => _("Argentina"),
-		   -1 =>_("All")
-		   );
-#   Info: HRC means "Harmonically Related Carrier"
-
-	   # default to pal since most people use that
-	   $norm = "PAL";
-	   if("@ARGV" !~ /--help|-h/) {
-		  my %countries =
-			 (
-			  "ar" => [ "argentina" ],
-			  "au" => [ "australia" ],
-			  "(br|fr)" => ["france", "SECAM"],
-			  "ca" => [ "canada-cable" ],
-			  "(ga|ie)" => [ "ireland" ],
-			  "it" => [ "italy" ],
-			  "jp" => [ "japan-bcast", "NTSC-JP"],
-			  "nz" => [ "newzealand" ],
-			  "(at|be|ch|de|eu|gb|se)" => [ "europe-west" ],
-			  "us" => [ "us-bcast", "NTSC" ],
-			  "za" => [ "southafrica" ],
-			  "(zh|TW|Big5|CN.GB2312|CN)" => [ "china-bcast" ]
-			  );
-
-		  ($_) = lang::read('', $>);
-		  foreach my $i (keys %countries) {
-			 if (/($i|$i.UTF-8)$/i) {
-				my $tbl = $countries{$i};
-				$ftable_id = $tbl->[0];
-				$norm = $tbl->[1] if ($tbl->[1]);
-			 }
-		  }
-		  log::l("[drakxtv] guess lang=>$_, norm=>$norm, area=>$ftable_id");
-	   }
-
-	   if ($in->ask_from("TVdrake", _("Please,\ntype in your tv norm and country"),
-					 [
-					  { label => _("TV norm :"), val => \$norm, list => ["NTSC", "NTSC-JP","PAL", "PAL-M", "PAL-N", "PAL-NC", "SECAM"], type => 'combo'},
-					  { label => _("Area :"), val => \$ftable_id, list => [keys %freqtables], format => sub { $freqtables{$_[0]} }, sort => 1},
-					  ]
-					 ))
-	   {   my $wait = $in->wait_message(_('Please wait'),
-								 _("Scanning for TV channels in progress ..."));
-#       we provide scantv a bogus table (france) which will
-#       will be ignored since "All" is selected (because of -a)
-		  $ftable_id = "france -a " if ($ftable_id eq -1);
-		  # Note that this'll be broken if/when we implement interactive_qt
-		  my $use_X =$in->isa('interactive_gtk') && -x "/usr/X11R6/bin/xvt";
-		  my $home = $ENV{HOME};
-		  my $i=system ( (($use_X ) ?
-					   "xvt -T '"._("Scanning for TV channels")." ...' -e ":"")
-					  . "scantv -n $norm -f $ftable_id -o $home/.xawtv".(($use_X )?"":" &>$home/tmp/scantv.log;"));
-		  if ($i) {
-			 $in->ask_warn(_("There was an error while scanning for TV channels"),
-						_("XawTV isn't installed!")); }
-		  else {
-			 standalone::explanations("created file $home/.xawtv");
-			   $in->ask_warn(_("Have a nice day!"),
-						  _("Now, you can run xawtv (under X Window!) !\n")) if (! $use_X);
-		    };
-		  
-	   };
-    }
-}
-
-my @devices = detect_devices::probeall(1);
-if (grep { $_->{media_type} eq 'MULTIMEDIA_VIDEO' } @devices) {
-    if (($< == 0) && (grep { $_->{driver} eq 'bttv' } @devices)) {
-	   use harddrake::bttv;
-	   harddrake::bttv::config($in);
-    }
-    scan4channels();
-    $in->exit(0);
-} else {
-    $in->ask_warn(_("No TV Card detected!"), formatAlaTeX(
-											   _("No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.
-
-
-You can visit our hardware database at:
-
-
-http://www.linux-mandrake.com/en/hardware.php3")));
-}
-
-
-# TODO :
-# - offer to sort channels after
-# - use Video-Capture-V4l-0.221 ?
-# - configure kwintv and zapping ? => they've already wizards :-(
-# - install xawtv if needed through consolhelper
diff --git a/perl-install/standalone/fileshareset b/perl-install/standalone/fileshareset
deleted file mode 100755
index f5390a382..000000000
--- a/perl-install/standalone/fileshareset
+++ /dev/null
@@ -1,389 +0,0 @@
-#!/usr/bin/perl -T
-use strict;
-
-########################################
-# config files
-$nfs_exports::default_options = '*(ro,all_squash)';
-$nfs_exports::conf_file = '/etc/exports';
-$smb_exports::conf_file = '/etc/samba/smb.conf';
-my $authorisation_file = '/etc/security/fileshare.conf';
-my $authorisation_group = 'fileshare';
-
-
-########################################
-# fileshare utility $Id$
-# Copyright (C) 2001-2002 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-
-########################################
-my $uid = $<;
-my $username = getpwuid($uid);
-
-########################################
-# errors
-my $usage =
-"usage: fileshareset --add <dir>
-       fileshareset --remove <dir>";
-my $non_authorised =
-qq(You are not authorised to use fileshare'ing
-To grant you the rights:
-- put "RESTRICT=no" in $authorisation_file
-- or put user "$username" in group "$authorisation_group");
-my $no_export_method = "can't export anything: no nfs, no smb";
-
-my %exit_codes = reverse (
-  1 => $non_authorised,
-  2 => $usage,
-
-# when adding
-  3 => "already exported", 
-  4 => "invalid mount point",
-
-# when removing
-  5 => "not exported",
-
-  6 => $no_export_method,
-
-  255 => "various",
-);
-
-################################################################################
-# correct PATH needed to call /etc/init.d/... ? seems not, but...
-%ENV = ();#(PATH => '/bin:/sbin:/usr/bin:/usr/sbin');
-
-my $modify = $0 =~ /fileshareset/;
-
-authorisation::check($modify);
-
-my @exports = (
-	       -e $nfs_exports::conf_file ? nfs_exports::read() : (),
-	       -e $smb_exports::conf_file ? smb_exports::read() : (),
-	      );
-@exports or error($no_export_method);
-
-if ($modify) {
-    my ($cmd, $dir) = @ARGV;
-    $< = $>;
-    @ARGV == 2 && ($cmd eq '--add' || $cmd eq '--remove') or error($usage);
-
-    verify_mntpoint($dir);
-
-    if ($cmd eq '--add') {
-	my @errs = map { eval { $_->add($dir) }; $@ } @exports;
-	grep { !$_ } @errs or error("already exported");
-    } else {
-	my @errs = map { eval { $_->remove($dir) }; $@ } @exports;
-	grep { !$_ } @errs or error("not exported");
-    }    
-    foreach my $export (@exports) {
-	$export->write;
-	$export->update_server;
-    }
-}
-my @mntpoints = grep {$_} uniq(map { map { $_->{mntpoint} } @$_ } @exports);
-print "$_\n" foreach grep { own($_) } @mntpoints;
-
-
-sub own { $uid == 0 || (stat($_[0]))[4] == $uid }
-
-sub verify_mntpoint {
-    local ($_) = @_;
-    my $ok = 1;
-    $ok &&= m|^/|;
-    $ok &&= !m|/../|;
-    $ok &&= !m|[\0\n\r]|;
-    $ok &&= -d $_;
-    $ok &&= own($_);
-    $ok or error("invalid mount point");
-}
-
-sub error {
-    my ($string) = @_;
-    print STDERR "$string\n";
-    exit($exit_codes{$string} || 255);
-}
-sub member { my $e = shift; foreach (@_) { $e eq $_ and return 1 } 0 }
-sub uniq { my %l; $l{$_} = 1 foreach @_; grep { delete $l{$_} } @_ }
-
-
-################################################################################
-package authorisation;
-
-sub read_conf {
-    my ($exclusive_lock) = @_;
-    open F_lock, $authorisation_file; # don't care if it's missing
-    flock(F_lock, $exclusive_lock ? 2 : 1) or die "can't lock";
-    my %conf;
-    foreach (<F_lock>) {
-	s/#.*//; # remove comments
-	s/^\s+//; 
-	s/\s+$//;
-	/^$/ and next;
-	my ($cmd, $value) = split('=', $_, 2);
-	$conf{$cmd} = $value || warn qq(suspicious line "$_" in $authorisation_file\n);
-    }
-    # no close F_lock, keep it locked
-    \%conf
-}
-
-sub check {
-    my ($exclusive_lock) = @_;
-    my $conf = read_conf($exclusive_lock);
-
-    if (lc($conf->{RESTRICT}) eq 'no') {
-	# ok, access granted for everybody
-    } else {
-	my @l;
-	while (@l = getgrent) {
-	    last if $l[0] eq $authorisation_group;
-	}
-	::member($username, split(' ', $l[3])) or ::error($non_authorised);
-    }
-}
-
-################################################################################
-package exports;
-
-sub find {
-    my ($exports, $mntpoint) = @_;
-    foreach (@$exports) {
-	$_->{mntpoint} eq $mntpoint and return $_;
-    }
-    undef;
-}
-
-sub add {
-    my ($exports, $mntpoint) = @_;
-    foreach (@$exports) {
-	$_->{mntpoint} eq $mntpoint and die 'add';
-    }
-    push @$exports, my $e = { mntpoint => $mntpoint };
-    $e;
-}
-
-sub remove {
-    my ($exports, $mntpoint) = @_;
-    my @l = grep { $_->{mntpoint} ne $mntpoint } @$exports;
-    @l < @$exports or die 'remove';
-    @$exports = @l;  
-}
-
-
-################################################################################
-package nfs_exports;
-
-use vars qw(@ISA $conf_file $default_options);
-BEGIN { @ISA = 'exports' }
-
-sub read {
-    my $file = $conf_file;
-    local *F;
-    open F, $file or return [];
-
-    my ($prev_raw, $prev_line, %e, @l);
-    my $line_nb = 0;
-    foreach my $raw (<F>) {
-	$line_nb++;
-	local $_ = $raw;
-	$raw .= "\n" if !/\n/;
-
-	s/#.*//; # remove comments
-
-	s/^\s+//; 
-	s/\s+$//; # remove unuseful spaces to help regexps
-
-	if (/^$/) {
-	    # blank lines ignored
-	    $prev_raw .= $raw;
-	    next;
-	}
-
-	if (/\\$/) {
-	    # line continue across lines
-	    chop; # remove the backslash
-	    $prev_line .= "$_ ";
-	    $prev_raw .= $raw;
-	    next;
-	}
-	my $line = $prev_line . $_;
-	my $raw_line = $prev_raw . $raw;
-	($prev_line, $prev_raw) = ('', '');
-
-	my ($mntpoint, $options) = $line =~ /("[^"]*"|\S+)\s+(.*)/ or die "$file:$line_nb: bad line $line\n";
-
-	# You can also specify spaces or any other unusual characters in the
-	# export path name using a backslash followed by the character code as
-	# 3 octal digits.
-	$mntpoint =~ s/\\(\d{3})/chr(oct $1)/ge;
-
-	# not accepting weird characters that would break the output
-	$mntpoint =~ m/[\0\n\r]/ and die "i won't handle this";
-	push @l, { mntpoint => $mntpoint, option => $options, raw => $raw_line };
-    }
-    bless \@l, 'nfs_exports';
-}
-
-sub write {
-    my ($nfs_exports) = @_;
-    foreach (@$nfs_exports) {
-	if (!exists $_->{options}) {
-	    $_->{options} = $default_options;
-	}
-	if (!exists $_->{raw}) {	    
-	    my $mntpoint = $_->{mntpoint} =~ /\s/ ? qq("$_->{mntpoint}") : $_->{mntpoint};
-	    $_->{raw} = sprintf("%s %s\n", $mntpoint, $_->{options});
-	}
-    }
-    local *F;
-    open F, ">$conf_file" or die "can't write $conf_file";
-    print F $_->{raw} foreach @$nfs_exports;
-}
-
-sub update_server {
-    if (fork) {
-	system('/usr/sbin/exportfs', '-r');
-	if (system('/sbin/pidof rpc.mountd >/dev/null') != 0 ||
-	    system('/sbin/pidof nfsd >/dev/null') != 0) {
-	    # trying to start the server...
-	    system('/etc/init.d/portmap start') if system('/etc/init.d/portmap status') != 0;
-	    system('/etc/init.d/nfs', $_) foreach 'stop', 'start';
-	}
-	exit 0;
-    }
-}
-
-################################################################################
-package smb_exports;
-
-use vars qw(@ISA $conf_file);
-BEGIN { @ISA = 'exports' }
-
-sub read {
-    my ($s, @l);
-    local *F;
-    open F, $conf_file;
-    local $_;
-    while (<F>) {
-	if (/^\s*\[.*\]/ || eof F) {
-	    #- first line in the category
-	    my ($label) = $s =~ /^\s*\[(.*)\]/;
-	    my ($mntpoint) = $s =~ /^\s*path\s*=\s*(.*)/m;
-	    push @l, { mntpoint => $mntpoint, raw => $s, label => $label };
-	    $s = '';
-	}
-	$s .= $_;
-    }
-    bless \@l, 'smb_exports';
-}
-
-sub write {
-    my ($smb_exports) = @_;
-    foreach (@$smb_exports) {
-	if (!exists $_->{raw}) {
-	    $_->{raw} = <<EOF;
-
-[$_->{label}]
-   path = $_->{mntpoint}
-   comment = $_->{mntpoint}
-   public = yes
-   guest ok = yes
-   writable = no
-   wide links = no
-EOF
-	}
-    }
-    local *F;
-    open F, ">$conf_file" or die "can't write $conf_file";
-    print F $_->{raw} foreach @$smb_exports;
-}
-
-sub add {
-    my ($exports, $mntpoint) = @_;
-    my $e = $exports->exports::add($mntpoint);
-    $e->{label} = name_mangle($mntpoint, map { $_->{label} } @$exports);
-}
-
-sub name_mangle {
-    my ($input, @others) = @_;
-
-    local $_ = $input;
-
-    # 1. first only keep legal characters. "/" is also kept for the moment
-    tr|a-z|A-Z|;
-    s|[^A-Z0-9#\-_!/]|_|g; # "$" is allowed except at the end, remove it in any case
-    
-    # 2. removing non-interesting parts
-    s|^/||;
-    s|^home/||;
-    s|_*/_*|/|g;
-    s|_+|_|g;
-
-    # 3. if size is too small (!), make it bigger
-    $_ .= "_" while length($_) < 3;
-
-    # 4. if size is too big, shorten it
-    while (length > 12) {
-	my ($s) = m|.*?/(.*)|;
-	if (length($s) > 8 && !grep { /\Q$s/ } @others) {
-	    # dropping leading directories when the resulting is still long and meaningful
-	    $_ = $s;
-	    next;
-	}
-	s|(.*)[0-9#\-_!/]|$1| and next;
-
-	# inspired by "Christian Brolin" "Long names are doom" on comp.lang.functional
-	s|(.+)[AEIOU]|$1| and next; # allButFirstVowels
-	s|(.*)(.)\2|$1$2| and next; # adjacentDuplicates
-
-	s|(.*).|$1|; # booh, :'-(
-    }
-
-    # 5. remove "/"s still there
-    s|/|_|g;
-
-    # 6. resolving conflicts
-    my $l = join("|", map { quotemeta } @others);
-    my $conflicts = qr|^($l)$|;
-    if (/$conflicts/) {
-      A: while (1) {
-	    for (my $nb = 1; length("$_$nb") <= 12; $nb++) {
-		if ("$_$nb" !~ /$conflicts/) {
-		    $_ = "$_$nb";
-		    last A;
-		}
-	    }
-	    $_ or die "can't find a unique name";
-	    # can't find a unique name, dropping the last letter
-	    s|(.*).|$1|;
-	}
-    }
-
-    # 7. done
-    $_;
-}
-
-sub update_server {
-    if (fork) {
-	system('/usr/bin/killall -HUP smbd 2>/dev/null');
-	if (system('/sbin/pidof smbd >/dev/null') != 0 ||
-	    system('/sbin/pidof nmbd >/dev/null') != 0) {
-	    # trying to start the server...
-	    system('/etc/init.d/smb', $_) foreach 'stop', 'start';
-	}
-	exit 0;
-    }
-}
diff --git a/perl-install/standalone/harddrake2 b/perl-install/standalone/harddrake2
deleted file mode 100755
index 89375e8fc..000000000
--- a/perl-install/standalone/harddrake2
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/usr/bin/perl -w
-
-use lib qw(/usr/lib/libDrakX);
-use harddrake::ui;
-
-harddrake::ui->run;
diff --git a/perl-install/standalone/icons/categ.png b/perl-install/standalone/icons/categ.png
deleted file mode 100644
index b466e0f43..000000000
--- a/perl-install/standalone/icons/categ.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/drakTS.620x57.png b/perl-install/standalone/icons/drakTS.620x57.png
deleted file mode 100644
index d4735df1d..000000000
--- a/perl-install/standalone/icons/drakTS.620x57.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/drakbackup.540x57.png b/perl-install/standalone/icons/drakbackup.540x57.png
deleted file mode 100644
index 5af42dfea..000000000
--- a/perl-install/standalone/icons/drakbackup.540x57.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/drakfont.620x57.png b/perl-install/standalone/icons/drakfont.620x57.png
deleted file mode 100644
index 1eb7feb46..000000000
--- a/perl-install/standalone/icons/drakfont.620x57.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/eth_card_mini2.png b/perl-install/standalone/icons/eth_card_mini2.png
deleted file mode 100644
index 6efbe637c..000000000
--- a/perl-install/standalone/icons/eth_card_mini2.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/fileopen.xpm b/perl-install/standalone/icons/fileopen.xpm
deleted file mode 100644
index 74049e224..000000000
--- a/perl-install/standalone/icons/fileopen.xpm
+++ /dev/null
@@ -1,34 +0,0 @@
-/* XPM */
-/* Drawn  by Mark Donohoe for the K Desktop Environment */
-/* See http://www.kde.org */
-static char*fileopen[]={
-"22 22 6 1",
-"# c #000000",
-"d c #808080",
-"c c #c0c0c0",
-"b c #ffffff",
-"a c #dcdcdc",
-". c None",
-"......................",
-"......................",
-"............####......",
-"...............##.#...",
-"................###...",
-"................###...",
-"...............####...",
-"....####..............",
-"....#aba#######.......",
-"....#babababab#.......",
-"....#aa##########.....",
-"....#ba#aacccccd#.....",
-"....#a#aacacccd#......",
-"....#a#aacccdcd#......",
-"....##aacacccd#.......",
-"....##aacccdcd#.......",
-"....#dddddddd#........",
-"....##########........",
-"......................",
-"......................",
-"......................",
-"......................"};
-
diff --git a/perl-install/standalone/icons/find.xpm b/perl-install/standalone/icons/find.xpm
deleted file mode 100644
index 3145ca7fe..000000000
--- a/perl-install/standalone/icons/find.xpm
+++ /dev/null
@@ -1,34 +0,0 @@
-/* XPM */
-/* Drawn  by Mark Donohoe for the K Desktop Environment */
-/* See http://www.kde.org */
-static char*find[]={
-"22 22 6 1",
-"# c #000000",
-"c c #ffffff",
-"b c #dcdcdc",
-"a c #a0a0a4",
-"d c #dcdcdc",
-". c None",
-"......................",
-"......................",
-"......................",
-".......####...........",
-".....a#bccd#a.........",
-".....#ccaacc#a........",
-"....#dcaccccd#........",
-"....#cccccccc#........",
-"....#cccccccc#........",
-"....#dccccccd#........",
-"....a#cccccc#a........",
-".....a#dccd###........",
-"......a####a###.......",
-".......aaaaaa###......",
-"............aa###.....",
-".............aa###....",
-"..............aa###...",
-"...............aa#a...",
-"................aa....",
-"......................",
-"......................",
-"......................"};
-
diff --git a/perl-install/standalone/icons/findf.xpm b/perl-install/standalone/icons/findf.xpm
deleted file mode 100644
index 792007335..000000000
--- a/perl-install/standalone/icons/findf.xpm
+++ /dev/null
@@ -1,31 +0,0 @@
-/* XPM */
-static char * findf_xpm[] = {
-"16 22 6 1",
-" 	c None",
-".	c #000000",
-"+	c #FFFFFF",
-"@	c #0000FF",
-"#	c #BEBEFF",
-"$	c #C0C0C0",
-"                ",
-"                ",
-"                ",
-" ...........    ",
-".+++++++++++.   ",
-".++++++++@#+.   ",
-".+++++++++@+.   ",
-".++++$...$++.   ",
-".+++$.+++.$+.   ",
-".+++.+#+#+.+.   ",
-".+++.+@@++.+.   ",
-".+++.++@#+.+.   ",
-".+++$.+++..+.   ",
-".@#++$....+..   ",
-".+@+++++++.+.   ",
-".++++++++++.+.  ",
-".++@#+++++++.+. ",
-" ........... .+.",
-"              . ",
-"                ",
-"                ",
-"                "};
diff --git a/perl-install/standalone/icons/ftin.xpm b/perl-install/standalone/icons/ftin.xpm
deleted file mode 100644
index d0326d3ce..000000000
--- a/perl-install/standalone/icons/ftin.xpm
+++ /dev/null
@@ -1,30 +0,0 @@
-/* XPM */
-static char * ftin_xpm[] = {
-"15 22 5 1",
-" 	c None",
-".	c #CD0000",
-"+	c #FFFFFF",
-"@	c #C0C0C0",
-"#	c #808080",
-"               ",
-"               ",
-"               ",
-"               ",
-"               ",
-"    . .        ",
-"    ...        ",
-"    ...++++++++",
-"    ...@@@@@@++",
-"  .......+++++#",
-"   .....@@@++#+",
-"  ++...+++++#+#",
-" +@@@.@@@++#+#+",
-"++++++++++#+#+ ",
-"##########+#+  ",
-"++++++++++#+   ",
-"##########+    ",
-"++++++++++     ",
-"               ",
-"               ",
-"               ",
-"               "};
diff --git a/perl-install/standalone/icons/ftout.xpm b/perl-install/standalone/icons/ftout.xpm
deleted file mode 100644
index b4e0135b8..000000000
--- a/perl-install/standalone/icons/ftout.xpm
+++ /dev/null
@@ -1,30 +0,0 @@
-/* XPM */
-static char * ftout_xpm[] = {
-"15 22 5 1",
-" 	c None",
-".	c #00008B",
-"+	c #FFFFFF",
-"@	c #C0C0C0",
-"#	c #808080",
-"               ",
-"               ",
-"               ",
-"               ",
-"               ",
-"     .         ",
-"    ...        ",
-"   .....+++++++",
-"  .......@@@@++",
-"    ...+++++++#",
-"   +...@@@@++#+",
-"  ++...+++++#+#",
-" +@@.+.@@++#+#+",
-"++++++++++#+#+ ",
-"##########+#+  ",
-"++++++++++#+   ",
-"##########+    ",
-"++++++++++     ",
-"               ",
-"               ",
-"               ",
-"               "};
diff --git a/perl-install/standalone/icons/gmon.png b/perl-install/standalone/icons/gmon.png
deleted file mode 100644
index 182adca81..000000000
--- a/perl-install/standalone/icons/gmon.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/cd.png b/perl-install/standalone/icons/harddrake2/cd.png
deleted file mode 100644
index 08180b54f..000000000
--- a/perl-install/standalone/icons/harddrake2/cd.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/cpu.png b/perl-install/standalone/icons/harddrake2/cpu.png
deleted file mode 100644
index 89d800c45..000000000
--- a/perl-install/standalone/icons/harddrake2/cpu.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/floppy.png b/perl-install/standalone/icons/harddrake2/floppy.png
deleted file mode 100644
index ca9f8bae9..000000000
--- a/perl-install/standalone/icons/harddrake2/floppy.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/harddisk.png b/perl-install/standalone/icons/harddrake2/harddisk.png
deleted file mode 100644
index 6a70153fe..000000000
--- a/perl-install/standalone/icons/harddrake2/harddisk.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/harddrake.png b/perl-install/standalone/icons/harddrake2/harddrake.png
deleted file mode 100644
index d2a64591e..000000000
--- a/perl-install/standalone/icons/harddrake2/harddrake.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/hw_mouse.png b/perl-install/standalone/icons/harddrake2/hw_mouse.png
deleted file mode 100644
index 239363e00..000000000
--- a/perl-install/standalone/icons/harddrake2/hw_mouse.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/hw_network.png b/perl-install/standalone/icons/harddrake2/hw_network.png
deleted file mode 100644
index 12ea7cff9..000000000
--- a/perl-install/standalone/icons/harddrake2/hw_network.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/hw_printer.png b/perl-install/standalone/icons/harddrake2/hw_printer.png
deleted file mode 100644
index ea0377005..000000000
--- a/perl-install/standalone/icons/harddrake2/hw_printer.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/ide_hd.png b/perl-install/standalone/icons/harddrake2/ide_hd.png
deleted file mode 100644
index 8ecac9aa4..000000000
--- a/perl-install/standalone/icons/harddrake2/ide_hd.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/isdn.png b/perl-install/standalone/icons/harddrake2/isdn.png
deleted file mode 100644
index e7c153d10..000000000
--- a/perl-install/standalone/icons/harddrake2/isdn.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/joystick.png b/perl-install/standalone/icons/harddrake2/joystick.png
deleted file mode 100644
index 6a025f4b5..000000000
--- a/perl-install/standalone/icons/harddrake2/joystick.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/keyboard.png b/perl-install/standalone/icons/harddrake2/keyboard.png
deleted file mode 100644
index 1acf4a75c..000000000
--- a/perl-install/standalone/icons/harddrake2/keyboard.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/memory.png b/perl-install/standalone/icons/harddrake2/memory.png
deleted file mode 100644
index 6159d0ab6..000000000
--- a/perl-install/standalone/icons/harddrake2/memory.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/modem.png b/perl-install/standalone/icons/harddrake2/modem.png
deleted file mode 100644
index d25c378ed..000000000
--- a/perl-install/standalone/icons/harddrake2/modem.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/scanner.png b/perl-install/standalone/icons/harddrake2/scanner.png
deleted file mode 100644
index d1c1e6eca..000000000
--- a/perl-install/standalone/icons/harddrake2/scanner.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/scsi.png b/perl-install/standalone/icons/harddrake2/scsi.png
deleted file mode 100644
index ad4690b6d..000000000
--- a/perl-install/standalone/icons/harddrake2/scsi.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/scsi_hd.png b/perl-install/standalone/icons/harddrake2/scsi_hd.png
deleted file mode 100644
index 51155d984..000000000
--- a/perl-install/standalone/icons/harddrake2/scsi_hd.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/sound.png b/perl-install/standalone/icons/harddrake2/sound.png
deleted file mode 100644
index faa893211..000000000
--- a/perl-install/standalone/icons/harddrake2/sound.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/tape.png b/perl-install/standalone/icons/harddrake2/tape.png
deleted file mode 100644
index 9b95fdb3b..000000000
--- a/perl-install/standalone/icons/harddrake2/tape.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/tv.png b/perl-install/standalone/icons/harddrake2/tv.png
deleted file mode 100644
index 4cfe5f869..000000000
--- a/perl-install/standalone/icons/harddrake2/tv.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/unknown.png b/perl-install/standalone/icons/harddrake2/unknown.png
deleted file mode 100644
index d30cdf167..000000000
--- a/perl-install/standalone/icons/harddrake2/unknown.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/usb.png b/perl-install/standalone/icons/harddrake2/usb.png
deleted file mode 100644
index 8538918f5..000000000
--- a/perl-install/standalone/icons/harddrake2/usb.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/video.png b/perl-install/standalone/icons/harddrake2/video.png
deleted file mode 100644
index 7ac95ca36..000000000
--- a/perl-install/standalone/icons/harddrake2/video.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/harddrake2/webcam.png b/perl-install/standalone/icons/harddrake2/webcam.png
deleted file mode 100644
index f5bbce103..000000000
--- a/perl-install/standalone/icons/harddrake2/webcam.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/hori.png b/perl-install/standalone/icons/hori.png
deleted file mode 100644
index 595805edf..000000000
--- a/perl-install/standalone/icons/hori.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic-drakfont-48.png b/perl-install/standalone/icons/ic-drakfont-48.png
deleted file mode 100644
index 07d8156e7..000000000
--- a/perl-install/standalone/icons/ic-drakfont-48.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-CD-40.png b/perl-install/standalone/icons/ic82-CD-40.png
deleted file mode 100644
index 16e9ded83..000000000
--- a/perl-install/standalone/icons/ic82-CD-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-back-up-16.png b/perl-install/standalone/icons/ic82-back-up-16.png
deleted file mode 100644
index fa2eff689..000000000
--- a/perl-install/standalone/icons/ic82-back-up-16.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-back-up-32.png b/perl-install/standalone/icons/ic82-back-up-32.png
deleted file mode 100644
index bfd292e0a..000000000
--- a/perl-install/standalone/icons/ic82-back-up-32.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-back-up-48.png b/perl-install/standalone/icons/ic82-back-up-48.png
deleted file mode 100644
index 3f4992134..000000000
--- a/perl-install/standalone/icons/ic82-back-up-48.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-discdurwhat-40.png b/perl-install/standalone/icons/ic82-discdurwhat-40.png
deleted file mode 100644
index 25817dabc..000000000
--- a/perl-install/standalone/icons/ic82-discdurwhat-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-dossier-32.png b/perl-install/standalone/icons/ic82-dossier-32.png
deleted file mode 100644
index 80198d443..000000000
--- a/perl-install/standalone/icons/ic82-dossier-32.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-moreoption-40.png b/perl-install/standalone/icons/ic82-moreoption-40.png
deleted file mode 100644
index bc9b10ac7..000000000
--- a/perl-install/standalone/icons/ic82-moreoption-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-network-40.png b/perl-install/standalone/icons/ic82-network-40.png
deleted file mode 100644
index cebb8bccd..000000000
--- a/perl-install/standalone/icons/ic82-network-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-others-40.png b/perl-install/standalone/icons/ic82-others-40.png
deleted file mode 100644
index 5ffc1e822..000000000
--- a/perl-install/standalone/icons/ic82-others-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-system-40.png b/perl-install/standalone/icons/ic82-system-40.png
deleted file mode 100644
index e92873674..000000000
--- a/perl-install/standalone/icons/ic82-system-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-systemeplus-40.png b/perl-install/standalone/icons/ic82-systemeplus-40.png
deleted file mode 100644
index a5699dff5..000000000
--- a/perl-install/standalone/icons/ic82-systemeplus-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-tape-40.png b/perl-install/standalone/icons/ic82-tape-40.png
deleted file mode 100644
index 5889f1074..000000000
--- a/perl-install/standalone/icons/ic82-tape-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-users-40.png b/perl-install/standalone/icons/ic82-users-40.png
deleted file mode 100644
index c87fa4135..000000000
--- a/perl-install/standalone/icons/ic82-users-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-when-40.png b/perl-install/standalone/icons/ic82-when-40.png
deleted file mode 100644
index ec5bf2bcf..000000000
--- a/perl-install/standalone/icons/ic82-when-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/ic82-where-40.png b/perl-install/standalone/icons/ic82-where-40.png
deleted file mode 100644
index 6a8125a9d..000000000
--- a/perl-install/standalone/icons/ic82-where-40.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/mdk_logo.png b/perl-install/standalone/icons/mdk_logo.png
deleted file mode 100644
index 960d079e3..000000000
--- a/perl-install/standalone/icons/mdk_logo.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/net_c.png b/perl-install/standalone/icons/net_c.png
deleted file mode 100644
index 5688f4be1..000000000
--- a/perl-install/standalone/icons/net_c.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/net_d.png b/perl-install/standalone/icons/net_d.png
deleted file mode 100644
index 1bfdd3ef2..000000000
--- a/perl-install/standalone/icons/net_d.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/net_u.png b/perl-install/standalone/icons/net_u.png
deleted file mode 100644
index 5c4a16079..000000000
--- a/perl-install/standalone/icons/net_u.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/reload.xpm b/perl-install/standalone/icons/reload.xpm
deleted file mode 100644
index 658cf36f0..000000000
--- a/perl-install/standalone/icons/reload.xpm
+++ /dev/null
@@ -1,31 +0,0 @@
-/* XPM */
-/* Drawn  by Mark Donohoe for the K Desktop Environment */
-/* See http://www.kde.org */
-static char*reload[]={
-"22 22 3 1",
-"# c #808080",
-"a c #000000",
-". c None",
-"......................",
-"......................",
-"......................",
-"......................",
-"........##aaa#........",
-".......#aaaaaaa.......",
-"......#aa#....#a......",
-"......aa#.............",
-".....aaa.......a......",
-"...aaaaaaa....aaa.....",
-"....aaaaa....aaaaa....",
-".....aaa....aaaaaaa...",
-"......a.......aaa.....",
-".............#aa......",
-"......a#....#aa#......",
-".......aaaaaaa#.......",
-"........#aaa##........",
-"......................",
-"......................",
-"......................",
-"......................",
-"......................"};
-
diff --git a/perl-install/standalone/icons/smbnfs_default.png b/perl-install/standalone/icons/smbnfs_default.png
deleted file mode 100644
index 546f06227..000000000
--- a/perl-install/standalone/icons/smbnfs_default.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/smbnfs_has_mntpoint.png b/perl-install/standalone/icons/smbnfs_has_mntpoint.png
deleted file mode 100644
index cbbbc1ec2..000000000
--- a/perl-install/standalone/icons/smbnfs_has_mntpoint.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/smbnfs_mounted.png b/perl-install/standalone/icons/smbnfs_mounted.png
deleted file mode 100644
index 49f47ec4d..000000000
--- a/perl-install/standalone/icons/smbnfs_mounted.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/smbnfs_server.png b/perl-install/standalone/icons/smbnfs_server.png
deleted file mode 100644
index 92af7a316..000000000
--- a/perl-install/standalone/icons/smbnfs_server.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/tradi.png b/perl-install/standalone/icons/tradi.png
deleted file mode 100644
index a9b19f468..000000000
--- a/perl-install/standalone/icons/tradi.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/verti.png b/perl-install/standalone/icons/verti.png
deleted file mode 100644
index 6bc84225b..000000000
--- a/perl-install/standalone/icons/verti.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/wiz_default_left.png b/perl-install/standalone/icons/wiz_default_left.png
deleted file mode 100644
index 2300ab36e..000000000
--- a/perl-install/standalone/icons/wiz_default_left.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/wiz_default_up.png b/perl-install/standalone/icons/wiz_default_up.png
deleted file mode 100644
index 20f386d17..000000000
--- a/perl-install/standalone/icons/wiz_default_up.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/wiz_drakgw.png b/perl-install/standalone/icons/wiz_drakgw.png
deleted file mode 100644
index aedff1dca..000000000
--- a/perl-install/standalone/icons/wiz_drakgw.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/wiz_firewall.png b/perl-install/standalone/icons/wiz_firewall.png
deleted file mode 100644
index 26923a00b..000000000
--- a/perl-install/standalone/icons/wiz_firewall.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/wiz_printerdrake.png b/perl-install/standalone/icons/wiz_printerdrake.png
deleted file mode 100644
index a49290702..000000000
--- a/perl-install/standalone/icons/wiz_printerdrake.png
+++ /dev/null
diff --git a/perl-install/standalone/icons/wiz_scannerdrake.png b/perl-install/standalone/icons/wiz_scannerdrake.png
deleted file mode 100644
index 297f0deca..000000000
--- a/perl-install/standalone/icons/wiz_scannerdrake.png
+++ /dev/null
diff --git a/perl-install/standalone/interactive_http/Makefile b/perl-install/standalone/interactive_http/Makefile
deleted file mode 100644
index 5607112c9..000000000
--- a/perl-install/standalone/interactive_http/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-NAME=libDrakX
-FNAME=$(NAME)/drakxtools_http
-PREFIX=
-DATADIR=$(PREFIX)/usr/share
-
-all: index.html
-
-index.html: index.html.pl
-	perl $^ > $@
-
-install:	
-	install -D miniserv.init $(PREFIX)/etc/init.d/drakxtools_http
-	install -D -m 644 authorised_progs $(PREFIX)/etc/drakxtools_http/authorised_progs
-	install -D -m 644 miniserv.conf $(PREFIX)/etc/drakxtools_http/conf
-	install -D -m 644 miniserv.pam $(PREFIX)/etc/pam.d/miniserv
-	install -D -m 644 miniserv.logrotate $(PREFIX)/etc/logrotate.d/drakxtools-http
-
-	install -d $(DATADIR)/$(FNAME)/www
-	install -m 644 miniserv.pl miniserv.pem miniserv.users $(DATADIR)/$(FNAME)
-	install -m 644 index.html $(DATADIR)/$(FNAME)/www
-	install interactive_http.cgi $(DATADIR)/$(FNAME)/www
diff --git a/perl-install/standalone/interactive_http/authorised_progs b/perl-install/standalone/interactive_http/authorised_progs
deleted file mode 100644
index d113e1297..000000000
--- a/perl-install/standalone/interactive_http/authorised_progs
+++ /dev/null
@@ -1,13 +0,0 @@
-/usr/sbin/XFdrake
-/usr/sbin/adduserdrake
-/usr/sbin/diskdrake
-/usr/sbin/drakautoinst
-/usr/sbin/drakboot
-/usr/sbin/drakgw
-/usr/sbin/draknet
-/usr/sbin/draksec
-/usr/sbin/drakxservices
-/usr/sbin/keyboarddrake
-/usr/sbin/mousedrake
-/usr/sbin/printerdrake
-/usr/sbin/tinyfirewall
diff --git a/perl-install/standalone/interactive_http/index.html.pl b/perl-install/standalone/interactive_http/index.html.pl
deleted file mode 100644
index afd91459b..000000000
--- a/perl-install/standalone/interactive_http/index.html.pl
+++ /dev/null
@@ -1,14 +0,0 @@
-use MDK::Common;
-
-print '<html>
-';
-foreach (map { chomp_($_) } cat_('authorised_progs')) {
-    my $name = basename($_);
-    print 
-qq(<a href="/interactive_http.cgi?state=new&prog=$_">$name</a>
-<br>
-);
-}
-print '
-</html>
-';
diff --git a/perl-install/standalone/interactive_http/interactive_http.cgi b/perl-install/standalone/interactive_http/interactive_http.cgi
deleted file mode 100755
index 935a4a765..000000000
--- a/perl-install/standalone/interactive_http/interactive_http.cgi
+++ /dev/null
@@ -1,95 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-use CGI;
-use common;
-use c;
-
-my $q = CGI->new;
-$| = 1;
-
-my $script_name = $q->url(-relative => 1);
-
-# name inversed (must be in sync with interactive_http.html)
-my $pipe_r = "/tmp/interactive_http_w";
-my $pipe_w = "/tmp/interactive_http_r";
-
-if ($q->param('state') eq 'new') {
-    force_exit_dead_prog();
-    mkfifo($pipe_r); mkfifo($pipe_w);
-
-    spawn_server($q->param('prog'));
-    first_step();
-
-} elsif ($q->param('state') eq 'next_step') {
-    next_step();
-} else {
-    error("booh...");
-}
-
-sub read_ {
-    local *F;
-    open F, "<$pipe_r" or error("Failed to connect to the prog");
-    my $t;
-    print $t while sysread F, $t, 1;
-}
-sub write_ {
-    local *F;
-    open F, ">$pipe_w" or die;
-    my $q = CGI->new;
-    $q->save(\*F);
-}
-
-sub first_step { read_() }
-sub next_step { write_(); read_() }
-
-
-sub force_exit_dead_prog {
-    -p $pipe_w or return;
-    {
-	local *F;
-	sysopen F, $pipe_w, 1 | c::O_NONBLOCK() or return;
-	syswrite F, "force_exit_dead_prog=1\n";
-    }
-
-    my $cnt = 10;
-    while (-p $pipe_w) {
-	sleep 1;
-	$cnt-- or error("Dead prog failed to exit");
-    }
-}
-
-sub spawn_server {
-    my ($prog) = @_;
-
-    my @authorised_progs = map { chomp_($_) } cat_('/etc/drakxtools_http/authorised_progs');
-    member($prog, @authorised_progs) or error("You tried to call a non-authorised program");
-
-    fork and return;
-
-    $ENV{INTERACTIVE_HTTP} = $script_name;
-
-    open STDIN, "</dev/zero";
-    open STDOUT, ">/dev/null"; #tmp/log";
-    open STDERR, ">&STDOUT";
-
-    c::setsid();
-    exec $prog or die "prog $prog not found\n";
-}
-
-sub error {
-    my $msg = join '', @_;
-
-    print $q->header(), $q->start_html();
-    print $q->h1(_("Error")), @_;
-    print $q->end_html(), "\n";
-    exit 0;
-}
-
-sub mkfifo {
-    my ($f) = @_;
-    -p $f and return;
-    unlink $f;
-    syscall_('mknod', $f, c::S_IFIFO() | 0600, 0) or die "mkfifo failed";
-    chmod 0666, $f;
-}
diff --git a/perl-install/standalone/interactive_http/miniserv.conf b/perl-install/standalone/interactive_http/miniserv.conf
deleted file mode 100644
index 99f6a5172..000000000
--- a/perl-install/standalone/interactive_http/miniserv.conf
+++ /dev/null
@@ -1,13 +0,0 @@
-ssl=1
-log=1
-port=10001
-listen=10001
-forkcgis=1
-realm=Drakxtools Server
-
-addtype_cgi=internal/cgi
-logfile=/var/log/drakxtools_http.log
-pidfile=/var/run/drakxtools_http.pid
-root=/usr/share/libDrakX/drakxtools_http/www
-keyfile=/usr/share/libDrakX/drakxtools_http/miniserv.pem
-userfile=/usr/share/libDrakX/drakxtools_http/miniserv.users
diff --git a/perl-install/standalone/interactive_http/miniserv.init b/perl-install/standalone/interactive_http/miniserv.init
deleted file mode 100644
index e7673083c..000000000
--- a/perl-install/standalone/interactive_http/miniserv.init
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-# chkconfig: 235 99 00
-# description: Start or stop the miniserv administration server
-
-name=drakxtools_http
-server=/usr/share/libDrakX/$name/miniserv.pl
-
-case "$1" in
-'start')
-	echo -n "Starting $name: "
-	perl $server /etc/$name/conf
-	touch /var/lock/subsys/drakxtools_http
-	echo $name
-	;;
-'stop')
-	echo -n "Shutting down $name: "
-	kill `cat /var/run/$name.pid`
-	rm -f /var/lock/subsys/drakxtools_http
-	echo $name
-	;;
-'status')
-	if [ -s /var/run/$name.pid ]; then
-	    pid=`cat /var/run/$name.pid`
-		kill -0 $pid >/dev/null 2>&1
-		if [ "$?" = "0" ]; then
-			echo "$name (pid $pid) is running"
-		else
-			echo "$name is stopped"
-		fi
-	else
-		echo "$name is stopped"
-	fi
-	;;
-'restart')
-	$0 stop
-	$0 start
-	;;
-'reload')
-        $0 stop
-        $0 start
-        ;;
-'condrestart')
-	if [ -f /var/lock/subsys/drakxtools_http ]; then
-            $0 restart
-        fi
-        ;;
-*)
-	echo "Usage: $0 {start|stop|restart|status|reload|condrestart}"
-	;;
-esac
-exit 0
diff --git a/perl-install/standalone/interactive_http/miniserv.logrotate b/perl-install/standalone/interactive_http/miniserv.logrotate
deleted file mode 100644
index b1e833f9b..000000000
--- a/perl-install/standalone/interactive_http/miniserv.logrotate
+++ /dev/null
@@ -1,7 +0,0 @@
-# Logrotate file for drakxtools-http RPM
-
-/var/log/drakxtools_http.log {
-    weekly
-    notifempty
-    missingok
-}
diff --git a/perl-install/standalone/interactive_http/miniserv.pam b/perl-install/standalone/interactive_http/miniserv.pam
deleted file mode 100644
index 37eae44e0..000000000
--- a/perl-install/standalone/interactive_http/miniserv.pam
+++ /dev/null
@@ -1,5 +0,0 @@
-#%PAM-1.0
-auth       required	/lib/security/pam_stack.so service=system-auth
-account    required	/lib/security/pam_stack.so service=system-auth
-password   required	/lib/security/pam_stack.so service=system-auth
-session    required	/lib/security/pam_stack.so service=system-auth
diff --git a/perl-install/standalone/interactive_http/miniserv.pem b/perl-install/standalone/interactive_http/miniserv.pem
deleted file mode 100644
index e11919e37..000000000
--- a/perl-install/standalone/interactive_http/miniserv.pem
+++ /dev/null
@@ -1,18 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIBOgIBAAJBANaRBV7X6DWUbTm8KBjjHx4CAHVSQCmei8QIwruVPngwOkEhsgzf
-IT1IY6jyY3QM6a4ASl7xokoy5U4QZ8E/q40CAwEAAQJBAIwMLA0zr4UJVCGTBjj4
-RZ84f0QUY3zG10Mk1LXLO/MFlRol+640x/PB76fPKP+Gx+88s8F6lcx7uV+jB0bM
-F6ECIQD3aYxjgxLinAmTjZf5gJDm/5LeEogML7nJ+aXJs8oAFwIhAN4DnKUfjiim
-pOowhaRqy8b9fjXG8L+SG/+KcZDsWzP7AiBO2gXTRVgEfwSSUUNJUo9b/8I4IqHX
-eHJ3C6ip8zIC+wIgdhsVygHvblC4ip0le0IVBdb0vUcH6+GeY2MS5zXVjuECIEP0
-GLnMXcQ02f8rQz0eeBYVHTNXKRMesgo3ZNcpDB2k
------END RSA PRIVATE KEY-----
------BEGIN CERTIFICATE-----
-MIIBNTCB4AIBADANBgkqhkiG9w0BAQQFADAmMRgwFgYDVQQKEw9XZWJtaW4gU29m
-dHdhcmUxCjAIBgNVBAMUASowHhcNOTgwMTAzMTAzNDUwWhcNMDcxMDAzMTAzNDUw
-WjAmMRgwFgYDVQQKEw9XZWJtaW4gU29mdHdhcmUxCjAIBgNVBAMUASowXDANBgkq
-hkiG9w0BAQEFAANLADBIAkEA1pEFXtfoNZRtObwoGOMfHgIAdVJAKZ6LxAjCu5U+
-eDA6QSGyDN8hPUhjqPJjdAzprgBKXvGiSjLlThBnwT+rjQIDAQABMA0GCSqGSIb3
-DQEBBAUAA0EAFCoYeLlWcClpv2sSc7zIchsMR3DKeH/O1ZtfEezzkaonre78HeYV
-wSQvuoVleb7A497TFcSB6+FON6azoVqPyQ==
------END CERTIFICATE-----
diff --git a/perl-install/standalone/interactive_http/miniserv.pl b/perl-install/standalone/interactive_http/miniserv.pl
deleted file mode 100644
index b11ce26e2..000000000
--- a/perl-install/standalone/interactive_http/miniserv.pl
+++ /dev/null
@@ -1,1817 +0,0 @@
-#!/usr/bin/perl
-# A very simple perl web server used by Webmin
-
-# Require basic libraries
-package miniserv;
-use Socket;
-use POSIX;
-use Sys::Hostname;
-
-# Find and read config file
-if (@ARGV != 1) {
-	die "Usage: miniserv.pl <config file>";
-	}
-if ($ARGV[0] =~ /^\//) {
-	$conf = $ARGV[0];
-	}
-else {
-	chop($pwd = `pwd`);
-	$conf = "$pwd/$ARGV[0]";
-	}
-open(CONF, $conf) || die "Failed to open config file $conf : $!";
-while(<CONF>) {
-	s/\r|\n//g;
-	if (/^#/ || !/\S/) { next; }
-	/^([^=]+)=(.*)$/;
-	$name = $1; $val = $2;
-	$name =~ s/^\s+//g; $name =~ s/\s+$//g;
-	$val =~ s/^\s+//g; $val =~ s/\s+$//g;
-	$config{$name} = $val;
-	}
-close(CONF);
-
-# Check is SSL is enabled and available
-if ($config{'ssl'}) {
-	eval "use Net::SSLeay";
-	if (!$@) {
-		$use_ssl = 1;
-		# These functions only exist for SSLeay 1.0
-		eval "Net::SSLeay::SSLeay_add_ssl_algorithms()";
-		eval "Net::SSLeay::load_error_strings()";
-		if (defined(&Net::SSLeay::X509_STORE_CTX_get_current_cert) &&
-		    defined(&Net::SSLeay::CTX_load_verify_locations) &&
-		    defined(&Net::SSLeay::CTX_set_verify)) {
-			$client_certs = 1;
-			}
-		}
-	}
-
-# Check if the syslog module is available to log hacking attempts
-if ($config{'syslog'}) {
-	eval "use Sys::Syslog qw(:DEFAULT setlogsock)";
-	if (!$@) {
-		$use_syslog = 1;
-		}
-	}
-
-# check if the PAM module is available to authenticate
-eval "use Authen::PAM";
-if (!$@) {
-	# check if the PAM authentication can be used by opening a handle
-	if (! ref($pamh = new Authen::PAM("miniserv", "root", \&pam_conv_func))) {
-		print STDERR "PAM module available, but error during init !\n";
-		print STDERR "Disabling PAM functions.\n";
-		}
-	else {
-		$use_pam = 1;
-		}
-	}
-
-# check if the TCP-wrappers module is available
-if ($config{'libwrap'}) {
-	eval "use Authen::Libwrap qw(hosts_ctl STRING_UNKNOWN)";
-	if (!$@) {
-		$use_libwrap = 1;
-		}
-	}
-
-# Get miniserv's perl path and location
-$miniserv_path = $0;
-open(SOURCE, $miniserv_path);
-<SOURCE> =~ /^#!(\S+)/; $perl_path = $1;
-close(SOURCE);
-@miniserv_argv = @ARGV;
-
-# Check vital config options
-%vital = ("port", 80,
-	  "root", "./",
-	  "server", "MiniServ/0.01",
-	  "index_docs", "index.html index.htm index.cgi",
-	  "addtype_html", "text/html",
-	  "addtype_txt", "text/plain",
-	  "addtype_gif", "image/gif",
-	  "addtype_jpg", "image/jpeg",
-	  "addtype_jpeg", "image/jpeg",
-	  "realm", "MiniServ",
-	  "session_login", "/session_login.cgi"
-	 );
-foreach $v (keys %vital) {
-	if (!$config{$v}) {
-		if ($vital{$v} eq "") {
-			die "Missing config option $v";
-			}
-		$config{$v} = $vital{$v};
-		}
-	}
-if (!$config{'sessiondb'}) {
-	$config{'pidfile'} =~ /^(.*)\/[^\/]+$/;
-	$config{'sessiondb'} = "$1/sessiondb";
-	}
-die "Session authentication cannot be used in inetd mode"
-	if ($config{'inetd'} && $config{'session'});
-
-# init days and months for http_date
-@weekday = ( "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" );
-@month = ( "Jan", "Feb", "Mar", "Apr", "May", "Jun",
-	   "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" );
-
-# Change dir to the server root
-chdir($config{'root'});
-$user_homedir = (getpwuid($<))[7];
-
-# Read users file
-if ($config{'userfile'}) {
-	open(USERS, $config{'userfile'});
-	while(<USERS>) {
-		s/\r|\n//g;
-		local @user = split(/:/, $_);
-		$users{$user[0]} = $user[1];
-		$certs{$user[0]} = $user[3] if ($user[3]);
-		if ($user[4] =~ /^allow\s+(.*)/) {
-			$allow{$user[0]} = [ &to_ipaddress(split(/\s+/, $1)) ];
-			}
-		elsif ($user[4] =~ /^deny\s+(.*)/) {
-			$deny{$user[0]} = [ &to_ipaddress(split(/\s+/, $1)) ];
-			}
-		}
-	close(USERS);
-	}
-
-# Setup SSL if possible and if requested
-if ($use_ssl) {
-	$ssl_ctx = Net::SSLeay::CTX_new() ||
-		die "Failed to create SSL context : $!";
-	$client_certs = 0 if (!$config{'ca'} || !%certs);
-	if ($client_certs) {
-		Net::SSLeay::CTX_load_verify_locations(
-			$ssl_ctx, $config{'ca'}, "");
-		Net::SSLeay::CTX_set_verify(
-			$ssl_ctx, &Net::SSLeay::VERIFY_PEER, \&verify_client);
-		}
-
-	Net::SSLeay::CTX_use_RSAPrivateKey_file(
-		$ssl_ctx, $config{'keyfile'},
-		&Net::SSLeay::FILETYPE_PEM) || die "Failed to open SSL key";
-	Net::SSLeay::CTX_use_certificate_file(
-		$ssl_ctx, $config{'keyfile'},
-		&Net::SSLeay::FILETYPE_PEM);
-	}
-
-# Setup syslog support if possible and if requested
-if ($use_syslog) {
-	eval { openlog("miniserv", "cons,pid,ndelay", "daemon") };
-	$use_syslog = 0 if ($@);
-	}
-
-# Read MIME types file and add extra types
-if ($config{"mimetypes"} ne "") {
-	open(MIME, $config{"mimetypes"});
-	while(<MIME>) {
-		chop; s/#.*$//;
-		if (/^(\S+)\s+(.*)$/) {
-			$type = $1; @exts = split(/\s+/, $2);
-			foreach $ext (@exts) {
-				$mime{$ext} = $type;
-				}
-			}
-		}
-	close(MIME);
-	}
-foreach $k (keys %config) {
-	if ($k !~ /^addtype_(.*)$/) { next; }
-	$mime{$1} = $config{$k};
-	}
-	
-# get the time zone
-if ($config{'log'}) {
-	local(@gmt, @lct, $days, $hours, $mins);
-	@make_date_marr = ("Jan", "Feb", "Mar", "Apr", "May", "Jun",
-		 	   "Jul", "Aug", "Sep", "Oct", "Nov", "Dec");
-	@gmt = gmtime(time());
-	@lct = localtime(time());
-	$days = $lct[3] - $gmt[3];
-	$hours = ($days < -1 ? 24 : 1 < $days ? -24 : $days * 24) +
-		 $lct[2] - $gmt[2];
-	$mins = $hours * 60 + $lct[1] - $gmt[1];
-	$timezone = ($mins < 0 ? "-" : "+"); $mins = abs($mins);
-	$timezone .= sprintf "%2.2d%2.2d", $mins/60, $mins%60;
-	}
-
-if ($config{'inetd'}) {
-	# We are being run from inetd - go direct to handling the request
-	$SIG{'HUP'} = 'IGNORE';
-	$SIG{'TERM'} = 'DEFAULT';
-	$SIG{'PIPE'} = 'DEFAULT';
-	open(SOCK, "+>&STDIN");
-
-	# Check if it is time for the logfile to be cleared
-	if ($config{'logclear'}) {
-		local $write_logtime = 0;
-		local @st = stat("$config{'logfile'}.time");
-		if (@st) {
-			if ($st[9]+$config{'logtime'}*60*60 < time()){
-				# need to clear log
-				$write_logtime = 1;
-				unlink($config{'logfile'});
-				}
-			}
-		else { $write_logtime = 1; }
-		if ($write_logtime) {
-			open(LOGTIME, ">$config{'logfile'}.time");
-			print LOGTIME time(),"\n";
-			close(LOGTIME);
-			}
-		}
-
-	# Initialize SSL for this connection
-	if ($use_ssl) {
-		$ssl_con = Net::SSLeay::new($ssl_ctx);
-		Net::SSLeay::set_fd($ssl_con, fileno(SOCK));
-		#Net::SSLeay::use_RSAPrivateKey_file(
-		#	$ssl_con, $config{'keyfile'},
-		#	&Net::SSLeay::FILETYPE_PEM);
-		#Net::SSLeay::use_certificate_file(
-		#	$ssl_con, $config{'keyfile'},
-		#	&Net::SSLeay::FILETYPE_PEM);
-		Net::SSLeay::accept($ssl_con) || exit;
-		}
-
-	# Work out the hostname for this web server
-	if (!$config{'host'}) {
-		($myport, $myaddr) =
-			unpack_sockaddr_in(getsockname(SOCK));
-		$myname = gethostbyaddr($myaddr, AF_INET);
-		if ($myname eq "") {
-			$myname = inet_ntoa($myaddr);
-			}
-		$host = $myname;
-		}
-	else { $host = $config{'host'}; }
-	$port = $config{'port'};
-
-	while(&handle_request(getpeername(SOCK), getsockname(SOCK))) { }
-	close(SOCK);
-	exit;
-	}
-
-# Open main socket
-$proto = getprotobyname('tcp');
-socket(MAIN, PF_INET, SOCK_STREAM, $proto) ||
-	die "Failed to open main socket : $!";
-setsockopt(MAIN, SOL_SOCKET, SO_REUSEADDR, pack("l", 1));
-$baddr = $config{"bind"} ? inet_aton($config{"bind"}) : INADDR_ANY;
-for($i=0; $i<5; $i++) {
-	last if (bind(MAIN, sockaddr_in($config{port}, $baddr)));
-	sleep(1);
-	}
-die "Failed to bind port $config{port} : $!" if ($i == 5);
-listen(MAIN, SOMAXCONN);
-
-if ($config{'listen'}) {
-	# Open the socket that allows other miniserv servers to find this one
-	$proto = getprotobyname('udp');
-	if (socket(LISTEN, PF_INET, SOCK_DGRAM, $proto)) {
-		setsockopt(LISTEN, SOL_SOCKET, SO_REUSEADDR, pack("l", 1));
-		bind(LISTEN, sockaddr_in($config{'listen'}, INADDR_ANY));
-		listen(LISTEN, SOMAXCONN);
-		}
-	else {
-		print STDERR "Failed to open listening socket : $!\n";
-		$config{'listen'} = 0;
-		}
-	}
-
-
-# Split from the controlling terminal
-if (fork()) { exit; }
-setsid();
-
-# write out the PID file
-open(PIDFILE, "> $config{'pidfile'}");
-printf PIDFILE "%d\n", getpid();
-close(PIDFILE);
-
-# Start the log-clearing process, if needed. This checks every minute
-# to see if the log has passed its reset time, and if so clears it
-if ($config{'logclear'}) {
-	if (!($logclearer = fork())) {
-		while(1) {
-			local $write_logtime = 0;
-			local @st = stat("$config{'logfile'}.time");
-			if (@st) {
-				if ($st[9]+$config{'logtime'}*60*60 < time()){
-					# need to clear log
-					$write_logtime = 1;
-					unlink($config{'logfile'});
-					}
-				}
-			else { $write_logtime = 1; }
-			if ($write_logtime) {
-				open(LOGTIME, ">$config{'logfile'}.time");
-				print LOGTIME time(),"\n";
-				close(LOGTIME);
-				}
-			sleep(5*60);
-			}
-		exit;
-		}
-	push(@childpids, $logclearer);
-	}
-
-# Setup the logout time dbm if needed
-if ($config{'session'}) {
-	eval "use SDBM_File";
-	dbmopen(%sessiondb, $config{'sessiondb'}, 0700);
-	eval { $sessiondb{'1111111111'} = 'foo bar' };
-	if ($@) {
-		dbmclose(%sessiondb);
-		eval "use NDBM_File";
-		dbmopen(%sessiondb, $config{'sessiondb'}, 0700);
-		}
-	}
-
-# Run the main loop
-$SIG{'HUP'} = 'miniserv::trigger_restart';
-$SIG{'TERM'} = 'miniserv::term_handler';
-$SIG{'PIPE'} = 'IGNORE';
-@deny = &to_ipaddress(split(/\s+/, $config{"deny"}));
-@allow = &to_ipaddress(split(/\s+/, $config{"allow"}));
-$p = 0;
-while(1) {
-	# wait for a new connection, or a message from a child process
-	undef($rmask);
-	vec($rmask, fileno(MAIN), 1) = 1;
-	if ($config{'passdelay'} || $config{'session'}) {
-		for($i=0; $i<@passin; $i++) {
-			vec($rmask, fileno($passin[$i]), 1) = 1;
-			}
-		}
-	vec($rmask, fileno(LISTEN), 1) = 1 if ($config{'listen'});
-
-	local $sel = select($rmask, undef, undef, 10);
-	if ($need_restart) { &restart_miniserv(); }
-	local $time_now = time();
-
-	# Clean up finished processes
-	local($pid);
-	do {	$pid = waitpid(-1, WNOHANG);
-		@childpids = grep { $_ != $pid } @childpids;
-		} while($pid > 0);
-
-	# run the unblocking procedure to check if enough time has passed to
-	# unblock hosts that heve been blocked because of password failures
-	if ($config{'blockhost_failures'}) {
-		$i = 0;
-		while ($i <= $#deny) {
-			if ($blockhosttime{$deny[$i]} && $config{'blockhost_time'} != 0 &&
-			    ($time_now - $blockhosttime{$deny[$i]}) >= $config{'blockhost_time'}) {
-				# the host can be unblocked now
-				$hostfail{$deny[$i]} = 0;
-				splice(@deny, $i, 1);
-				}
-			$i++;
-			}
-		}
-
-	if ($config{'session'}) {
-		# Remove sessions with more than 7 days of inactivity
-		foreach $s (keys %sessiondb) {
-			local ($user, $ltime) = split(/\s+/, $sessiondb{$s});
-			if ($time_now - $ltime > 7*24*60*60) {
-				delete($sessiondb{$s});
-				}
-			}
-		}
-	next if ($sel <= 0);
-	if (vec($rmask, fileno(MAIN), 1)) {
-		# got new connection
-		$acptaddr = accept(SOCK, MAIN);
-		if (!$acptaddr) { next; }
-
-		# create pipes
-		if ($config{'passdelay'} || $config{'session'}) {
-			$PASSINr = "PASSINr$p"; $PASSINw = "PASSINw$p";
-			$PASSOUTr = "PASSOUTr$p"; $PASSOUTw = "PASSOUTw$p";
-			$p++;
-			pipe($PASSINr, $PASSINw);
-			pipe($PASSOUTr, $PASSOUTw);
-			select($PASSINw); $| = 1; select($PASSINr); $| = 1;
-			select($PASSOUTw); $| = 1; select($PASSOUTw); $| = 1;
-			}
-		select(STDOUT);
-
-		# Check username of connecting user
-		local ($peerp, $peera) = unpack_sockaddr_in($acptaddr);
-		$localauth_user = undef;
-		if ($config{'localauth'} && inet_ntoa($peera) eq "127.0.0.1") {
-			if (open(TCP, "/proc/net/tcp")) {
-				# Get the info direct from the kernel
-				while(<TCP>) {
-					s/^\s+//;
-					local @t = split(/[\s:]+/, $_);
-					if ($t[1] eq '0100007F' &&
-					    $t[2] eq sprintf("%4.4X", $peerp)) {
-						$localauth_user = getpwuid($t[11]);
-						last;
-						}
-					}
-				close(TCP);
-				}
-			else {
-				# Call lsof for the info
-				local $lsofpid = open(LSOF,
-					"$config{'localauth'} -i TCP\@127.0.0.1:$peerp |");
-				while(<LSOF>) {
-					if (/^(\S+)\s+(\d+)\s+(\S+)/ &&
-					    $2 != $$ && $2 != $lsofpid) {
-						$localauth_user = $3;
-						}
-					}
-				close(LSOF);
-				}
-			}
-
-		# fork the subprocess
-		if (!($handpid = fork())) {
-			# setup signal handlers
-			$SIG{'TERM'} = 'DEFAULT';
-			$SIG{'PIPE'} = 'DEFAULT';
-			#$SIG{'CHLD'} = 'IGNORE';
-			$SIG{'HUP'} = 'IGNORE';
-
-			# Initialize SSL for this connection
-			if ($use_ssl) {
-				$ssl_con = Net::SSLeay::new($ssl_ctx);
-				Net::SSLeay::set_fd($ssl_con, fileno(SOCK));
-				#Net::SSLeay::use_RSAPrivateKey_file(
-				#	$ssl_con, $config{'keyfile'},
-				#	&Net::SSLeay::FILETYPE_PEM);
-				#Net::SSLeay::use_certificate_file(
-				#	$ssl_con, $config{'keyfile'},
-				#	&Net::SSLeay::FILETYPE_PEM);
-				Net::SSLeay::accept($ssl_con) || exit;
-				}
-
-			# close useless pipes
-			if ($config{'passdelay'} || $config{'session'}) {
-				foreach $p (@passin) { close($p); }
-				foreach $p (@passout) { close($p); }
-				close($PASSINr); close($PASSOUTw);
-				}
-			close(MAIN);
-
-			# Work out the hostname for this web server
-			if (!$config{'host'}) {
-				($myport, $myaddr) =
-					unpack_sockaddr_in(getsockname(SOCK));
-				$myname = gethostbyaddr($myaddr, AF_INET);
-				if ($myname eq "") {
-					$myname = inet_ntoa($myaddr);
-					}
-				$host = $myname;
-				}
-			else { $host = $config{'host'}; }
-			$port = $config{'port'};
-
-			local $switched = 0;
-			if ($config{'remoteuser'} && $localauth_user && !$<) {
-				# Switch to the UID of the remote user
-				local @u = getpwnam($localauth_user);
-				if (@u) {
-					$( = $u[3]; $) = "$u[3] $u[3]";
-					$< = $> = $u[2];
-					$switched = 1;
-					}
-				}
-			if ($config{'switchuser'} && !$< && !$switched) {
-				# Switch to the UID of server user
-				local @u = getpwnam($config{'switchuser'});
-				if (@u) {
-					$( = $u[3]; $) = "$u[3] $u[3]";
-					$< = $> = $u[2];
-					}
-				}
-
-			while(&handle_request($acptaddr, getsockname(SOCK))) { }
-			shutdown(SOCK, 1);
-			close(SOCK);
-			close($PASSINw); close($PASSOUTw);
-			exit;
-			}
-		push(@childpids, $handpid);
-		if ($config{'passdelay'} || $config{'session'}) {
-			close($PASSINw); close($PASSOUTr);
-			push(@passin, $PASSINr); push(@passout, $PASSOUTw);
-			}
-		close(SOCK);
-		}
-
-	if ($config{'listen'} && vec($rmask, fileno(LISTEN), 1)) {
-		# Got UDP packet from another miniserv server
-		local $rcvbuf;
-		local $from = recv(LISTEN, $rcvbuf, 1024, 0);
-		next if (!$from);
-		local $fromip = inet_ntoa((unpack_sockaddr_in($from))[1]);
-		local $toip = inet_ntoa((unpack_sockaddr_in(
-					 getsockname(LISTEN)))[1]);
-		if ((!@deny || !&ip_match($fromip, $toip, @deny)) &&
-		    (!@allow || &ip_match($fromip, $toip, @allow))) {
-			send(LISTEN, "$config{'host'}:$config{'port'}:".
-				     "$use_ssl", 0, $from);
-			}
-		}
-
-	# check for password-timeout messages from subprocesses
-	for($i=0; $i<@passin; $i++) {
-		if (vec($rmask, fileno($passin[$i]), 1)) {
-			# this sub-process is asking about a password
-			$infd = $passin[$i]; $outfd = $passout[$i];
-			$inline = <$infd>;
-			if ($inline =~ /^delay\s+(\S+)\s+(\S+)\s+(\d+)/) {
-				# Got a delay request from a subprocess.. for
-				# valid logins, there is no delay (to prevent
-				# denial of service attacks), but for invalid
-				# logins the delay increases with each failed
-				# attempt.
-				if ($3) {
-					# login OK.. no delay
-					print $outfd "0 0\n";
-					$hostfail{$2} = 0;
-					}
-				else {
-					# login failed..
-					$hostfail{$2}++;
-					# add the host to the block list if necessary
- 					if ($config{'blockhost_failures'} &&
-					    $hostfail{$2} >= $config{'blockhost_failures'}) {
-						push(@deny, $2);					
-						$blockhosttime{$2} = $time_now;
-						$blocked = 1;
-						if ($use_syslog) {
-							local $logtext = "Security alert: Host $2 ".
-							  "blocked after $config{'blockhost_failures'} ".
-							  "failed logins for user $1";
-							syslog("crit", $logtext);
-							}
-						}
-					else {
-						$blocked = 0;
-						}
-					$dl = $userdlay{$1} -
-					      int(($time_now - $userlast{$1})/50);
-					$dl = $dl < 0 ? 0 : $dl+1;
-					print $outfd "$dl $blocked\n";
-					$userdlay{$1} = $dl;
-					}
-				$userlast{$1} = $time_now;
-				}
-			elsif ($inline =~ /^verify\s+(\S+)/) {
-				# Verifying a session ID
-				local $session_id = $1;
-				if (!defined($sessiondb{$session_id})) {
-					print $outfd "0 0\n";
-					}
-				else {
-					local ($user, $ltime) = split(/\s+/, $sessiondb{$session_id});
-					if ($config{'logouttime'} &&
-					    $time_now - $ltime > $config{'logouttime'}*60) {
-						print $outfd "1 ",$time_now - $ltime,"\n";
-						delete($sessiondb{$session_id});
-						}
-					else {
-						print $outfd "2 $user\n";
-						$sessiondb{$session_id} = "$user $time_now";
-						}
-					}
-				}
-			elsif ($inline =~ /^new\s+(\S+)\s+(\S+)/) {
-				# Creating a new session
-				$sessiondb{$1} = "$2 $time_now";
-				}
-			elsif ($inline =~ /^delete\s+(\S+)/) {
-				# Logging out a session
-				print $outfd $sessiondb{$1} ? 1 : 0,"\n";
-				delete($sessiondb{$1});
-				}
-			else {
-				# close pipe
-				close($infd); close($outfd);
-				$passin[$i] = $passout[$i] = undef;
-				}
-			}
-		}
-	@passin = grep { defined($_) } @passin;
-	@passout = grep { defined($_) } @passout;
-	}
-
-# handle_request(remoteaddress, localaddress)
-# Where the real work is done
-sub handle_request
-{
-$acptip = inet_ntoa((unpack_sockaddr_in($_[0]))[1]);
-$localip = $_[1] ? inet_ntoa((unpack_sockaddr_in($_[1]))[1]) : undef;
-if ($config{'loghost'}) {
-	$acpthost = gethostbyaddr(inet_aton($acptip), AF_INET);
-	$acpthost = $acptip if (!$acpthost);
-	}
-else {
-	$acpthost = $acptip;
-	}
-$datestr = &http_date(time());
-$ok_code = 200;
-$ok_message = "Document follows";
-
-# Wait at most 60 secs for start of headers (but only for the first time)
-if (!$checked_timeout) {
-	local $rmask;
-	vec($rmask, fileno(SOCK), 1) = 1;
-	local $sel = select($rmask, undef, undef, 60);
-	$sel || &http_error(400, "Timeout");
-	$checked_timeout++;
-	}
-
-# Read the HTTP request and headers
-($reqline = &read_line()) =~ s/\r|\n//g;
-if (!($reqline =~ /^(GET|POST|HEAD)\s+(.*)\s+HTTP\/1\..$/)) {
-	&http_error(400, "Bad Request");
-	}
-$method = $1; $request_uri = $page = $2;
-%header = ();
-local $lastheader;
-while(1) {
-	($headline = &read_line()) =~ s/\r|\n//g;
-	last if ($headline eq "");
-	if ($headline =~ /^(\S+):\s+(.*)$/) {
-		$header{$lastheader = lc($1)} = $2;
-		}
-	elsif ($headline =~ /^\s+(.*)$/) {
-		$header{$lastheader} .= $headline;
-		}
-	else {
-		&http_error(400, "Bad Header $headline");
-		}
-	}
-if (defined($header{'host'})) {
-	if ($header{'host'} =~ /^([^:]+):([0-9]+)$/) { $host = $1; $port = $2; }
-	else { $host = $header{'host'}; }
-	}
-undef(%in);
-if ($page =~ /^([^\?]+)\?(.*)$/) {
-	# There is some query string information
-	$page = $1;
-	$querystring = $2;
-	if ($querystring !~ /=/) {
-		$queryargs = $querystring;
-		$queryargs =~ s/\+/ /g;
-    		$queryargs =~ s/%(..)/pack("c",hex($1))/ge;
-		$querystring = "";
-		}
-	else {
-		# Parse query-string parameters
-		local @in = split(/\&/, $querystring);
-		foreach $i (@in) {
-			local ($k, $v) = split(/=/, $i, 2);
-			$k =~ s/\+/ /g; $k =~ s/%(..)/pack("c",hex($1))/ge;
-			$v =~ s/\+/ /g; $v =~ s/%(..)/pack("c",hex($1))/ge;
-			$in{$k} = $v;
-			}
-		}
-	}
-$posted_data = undef;
-if ($method eq 'POST' &&
-    $header{'content-type'} eq 'application/x-www-form-urlencoded') {
-	# Read in posted query string information
-	$clen = $header{"content-length"};
-	while(length($posted_data) < $clen) {
-		$buf = &read_data($clen - length($posted_data));
-		if (!length($buf)) {
-			&http_error(500, "Failed to read POST request");
-			}
-		$posted_data .= $buf;
-		}
-	local @in = split(/\&/, $posted_data);
-	foreach $i (@in) {
-		local ($k, $v) = split(/=/, $i, 2);
-		$k =~ s/\+/ /g; $k =~ s/%(..)/pack("c",hex($1))/ge;
-		$v =~ s/\+/ /g; $v =~ s/%(..)/pack("c",hex($1))/ge;
-		$in{$k} = $v;
-		}
-	}
-
-# replace %XX sequences in page
-$page =~ s/%(..)/pack("c",hex($1))/ge;
-
-# check address against access list
-if (@deny && &ip_match($acptip, $localip, @deny) ||
-    @allow && !&ip_match($acptip, $localip, @allow)) {
-	&http_error(403, "Access denied for $acptip");
-	return 0;
-	}
-
-if ($use_libwrap) {
-	# Check address with TCP-wrappers
-	if (!hosts_ctl("miniserv", STRING_UNKNOWN, $acptip, STRING_UNKNOWN)) {
-		&http_error(403, "Access denied for $acptip");
-		return 0;
-		}
-	}
-
-# check for the logout flag file, and if existant deny authentication
-if ($config{'logout'} && -r $config{'logout'}.$in{'miniserv_logout_id'}) {
-	$deny_authentication++;
-	open(LOGOUT, $config{'logout'}.$in{'miniserv_logout_id'});
-	chop($count = <LOGOUT>);
-	close(LOGOUT);
-	$count--;
-	if ($count > 0) {
-		open(LOGOUT, ">$config{'logout'}$in{'miniserv_logout_id'}");
-		print LOGOUT "$count\n";
-		close(LOGOUT);
-		}
-	else {
-		unlink($config{'logout'}.$in{'miniserv_logout_id'});
-		}
-	}
-
-# Check for password if needed
-if (%users) {
-	$validated = 0;
-	$blocked = 0;
-
-	# Session authentication is never used for connections by
-	# another miniserv server
-	if ($header{'user-agent'} =~ /miniserv/i) {
-		$config{'session'} = 0;
-		}
-
-	# check for SSL authentication
-	if ($use_ssl && $verified_client) {
-		$peername = Net::SSLeay::X509_NAME_oneline(
-				Net::SSLeay::X509_get_subject_name(
-					Net::SSLeay::get_peer_certificate(
-						$ssl_con)));
-		foreach $u (keys %certs) {
-			if ($certs{$u} eq $peername) {
-				$authuser = $u;
-				$validated = 2;
-				last;
-				}
-			}
-		}
-
-	# Check for normal HTTP authentication
-	if (!$validated && !$deny_authentication && !$config{'session'} &&
-	    $header{authorization} =~ /^basic\s+(\S+)$/i) {
-		# authorization given..
-		($authuser, $authpass) = split(/:/, &b64decode($1));
-		$validated = &validate_user($authuser, $authpass);
-
-		if ($config{'passdelay'} && !$config{'inetd'}) {
-			# check with main process for delay
-			print $PASSINw "delay $authuser $acptip $validated\n";
-			<$PASSOUTr> =~ /(\d+) (\d+)/;
-			$blocked = $2;
-			sleep($1);
-			}
-		}
-
-	# Check for new session validation
-	if ($config{'session'} && !$deny_authentication && $page eq $config{'session_login'}) {
-		local $ok = &validate_user($in{'user'}, $in{'pass'});
-
-		# check if the test cookie is set
-		if ($header{'cookie'} !~ /testing=1/ && $in{'user'}) {
-			&http_error(500, "No cookies",
-				    "Your browser does not support cookies, ".
-				    "which are required for Webmin to work in ".
-				    "session authentication mode");
-			}
-
-		# check with main process for delay
-		if ($config{'passdelay'} && $in{'user'}) {
-			print $PASSINw "delay $in{'user'} $acptip $ok\n";
-			<$PASSOUTr> =~ /(\d+) (\d+)/;
-			$blocked = $2;
-			sleep($1);
-			}
-
-		if ($ok) {
-			# Logged in OK! Tell the main process about the new SID
-			local $sid = time();
-			local $mul = 1;
-			foreach $c (split(//, crypt($in{'pass'}, substr($$, -2)))) {
-				$sid += ord($c) * $mul;
-				$mul *= 3;
-				}
-			print $PASSINw "new $sid $in{'user'}\n";
-
-			# Set cookie and redirect
-			&write_data("HTTP/1.0 302 Moved Temporarily\r\n");
-			&write_data("Date: $datestr\r\n");
-			&write_data("Server: $config{'server'}\r\n");
-			$portstr = $port == 80 && !$use_ssl ? "" :
-				   $port == 443 && $use_ssl ? "" : ":$port";
-			$prot = $use_ssl ? "https" : "http";
-			if ($in{'save'}) {
-				&write_data("Set-Cookie: sid=$sid; path=/; expires=\"Fri, 1-Jan-2038 00:00:01\"\r\n");
-				}
-			else {
-				&write_data("Set-Cookie: sid=$sid; path=/\r\n");
-				}
-			&write_data("Location: $prot://$host$portstr$in{'page'}\r\n");
-			&write_keep_alive(0);
-			&write_data("\r\n");
-			&log_request($acpthost, $authuser, $reqline, 302, 0);
-			return 0;
-			}
-		elsif ($in{'logout'} && $header{'cookie'} =~ /sid=(\d+)/) {
-			# Logout clicked .. remove the session
-			print $PASSINw "delete $1\n";
-			local $dummy = <$PASSINr>;
-			$logout = 1;
-			$already_session_id = undef;
-			}
-		else {
-			# Login failed .. display the form again
-			$failed_user = $in{'user'};
-			$request_uri = $in{'page'};
-			$already_session_id = undef;
-			}
-		}
-
-	# Check for an existing session
-	if ($config{'session'} && !$validated) {
-		if ($already_session_id) {
-			$session_id = $already_session_id;
-			$authuser = $already_authuser;
-			$validated = 1;
-			}
-		elsif (!$deny_authentication && $header{'cookie'} =~ /sid=(\d+)/) {
-			$session_id = $1;
-			print $PASSINw "verify $session_id\n";
-			<$PASSOUTr> =~ /(\d+)\s+(\S+)/;
-			if ($1 == 2) {
-				# Valid session continuation
-				$validated = 1;
-				$authuser = $2;
-				$already_session_id = $session_id;
-				$already_authuser = $authuser;
-				}
-			elsif ($1 == 1) {
-				# Session timed out
-				$timed_out = $2;
-				}
-			else {
-				# Invalid session ID .. don't set verified
-				}
-			}
-		}
-
-	# Check for local authentication
-	if ($localauth_user) {
-		if (defined($users{$localauth_user})) {
-			$validated = 1;
-			$authuser = $localauth_user;
-			}
-		else {
-			$localauth_user = undef;
-			}
-		}
-
-	if (!$validated) {
-		if ($blocked == 0) {
-			# No password given.. ask
-			if ($config{'session'}) {
-				# Force CGI for session login
-				$validated = 1;
-				if ($logout) {
-					$querystring .= "&logout=1&page=/";
-					}
-				else {
-					$querystring = "page=".&urlize($request_uri);
-					}
-				$querystring .= "&failed=$failed_user" if ($failed_user);
-				$querystring .= "&timed_out=$timed_out" if ($timed_out);
-				$queryargs = "";
-				$page = $config{'session_login'};
-				}
-			else {
-				# Ask for login with HTTP authentication
-				&write_data("HTTP/1.0 401 Unauthorized\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{'server'}\r\n");
-				&write_data("WWW-authenticate: Basic ".
-					   "realm=\"$config{'realm'}\"\r\n");
-				&write_keep_alive(0);
-				&write_data("Content-type: text/html\r\n");
-				&write_data("\r\n");
-				&reset_byte_count();
-				&write_data("<html>\n");
-				&write_data("<head><title>Unauthorized</title></head>\n");
-				&write_data("<body><h1>Unauthorized</h1>\n");
-				&write_data("A password is required to access this\n");
-				&write_data("web server. Please try again. <p>\n");
-				&write_data("</body></html>\n");
-				&log_request($acpthost, undef, $reqline, 401, &byte_count());
-				return 0;
-				}
-			}
-		else {
-			# when the host has been blocked, give it an error message
-			&http_error(403, "Access denied for $acptip. The host has been blocked "
-				."because of too many authentication failures.");
-			}
-		}
-
-	# Check per-user IP access control
-	if ($deny{$authuser} && &ip_match($acptip, $localip, @{$deny{$authuser}}) ||
-	    $allow{$authuser} && !&ip_match($acptip, $localip, @{$allow{$authuser}})) {
-		&http_error(403, "Access denied for $acptip");
-		return 0;
-		}
-	}
-
-# Figure out what kind of page was requested
-rerun:
-$simple = &simplify_path($page, $bogus);
-$simple =~ s/[\000-\037]//g;
-if ($bogus) {
-	&http_error(400, "Invalid path");
-	}
-undef($full);
-if ($config{'preroot'}) {
-	# Look in the template root directory first
-	$is_directory = 1;
-	$sofar = "";
-	$full = $config{"preroot"} . $sofar;
-	$scriptname = $simple;
-	foreach $b (split(/\//, $simple)) {
-		if ($b ne "") { $sofar .= "/$b"; }
-		$full = $config{"preroot"} . $sofar;
-		@st = stat($full);
-		if (!@st) { undef($full); last; }
-
-		# Check if this is a directory
-		if (-d $full) {
-			# It is.. go on parsing
-			$is_directory = 1;
-			next;
-			}
-		else { $is_directory = 0; }
-
-		# Check if this is a CGI program
-		if (&get_type($full) eq "internal/cgi") {
-			$pathinfo = substr($simple, length($sofar));
-			$pathinfo .= "/" if ($page =~ /\/$/);
-			$scriptname = $sofar;
-			last;
-			}
-		}
-	if ($full) {
-		if ($sofar eq '') {
-			$cgi_pwd = $config{'root'};
-			}
-		else {
-			"$config{'root'}$sofar" =~ /^(.*\/)[^\/]+$/;
-			$cgi_pwd = $1;
-			}
-		if ($is_directory) {
-			# Check for index files in the directory
-			foreach $idx (split(/\s+/, $config{"index_docs"})) {
-				$idxfull = "$full/$idx";
-				if (-r $idxfull && !(-d $idxfull)) {
-					$full = $idxfull;
-					$is_directory = 0;
-					$scriptname .= "/"
-						if ($scriptname ne "/");
-					last;
-					}
-				}
-			}
-		}
-	}
-if (!$full || $is_directory) {
-	$sofar = "";
-	$full = $config{"root"} . $sofar;
-	$scriptname = $simple;
-	foreach $b (split(/\//, $simple)) {
-		if ($b ne "") { $sofar .= "/$b"; }
-		$full = $config{"root"} . $sofar;
-		@st = stat($full);
-		if (!@st) { &http_error(404, "File not found"); }
-
-		# Check if this is a directory
-		if (-d $full) {
-			# It is.. go on parsing
-			next;
-			}
-
-		# Check if this is a CGI program
-		if (&get_type($full) eq "internal/cgi") {
-			$pathinfo = substr($simple, length($sofar));
-			$pathinfo .= "/" if ($page =~ /\/$/);
-			$scriptname = $sofar;
-			last;
-			}
-		}
-	$full =~ /^(.*\/)[^\/]+$/; $cgi_pwd = $1;
-	}
-
-# check filename against denyfile regexp
-local $denyfile = $config{'denyfile'};
-if ($denyfile && $full =~ /$denyfile/) {
-	&http_error(403, "Access denied to $page");
-	return 0;
-	}
-
-# Reached the end of the path OK.. see what we've got
-if (-d $full) {
-	# See if the URL ends with a / as it should
-	if ($page !~ /\/$/) {
-		# It doesn't.. redirect
-		&write_data("HTTP/1.0 302 Moved Temporarily\r\n");
-		$portstr = $port == 80 && !$use_ssl ? "" :
-			   $port == 443 && $use_ssl ? "" : ":$port";
-		&write_data("Date: $datestr\r\n");
-		&write_data("Server: $config{server}\r\n");
-		$prot = $use_ssl ? "https" : "http";
-		&write_data("Location: $prot://$host$portstr$page/\r\n");
-		&write_keep_alive(0);
-		&write_data("\r\n");
-		&log_request($acpthost, $authuser, $reqline, 302, 0);
-		return 0;
-		}
-	# A directory.. check for index files
-	foreach $idx (split(/\s+/, $config{"index_docs"})) {
-		$idxfull = "$full/$idx";
-		if (-r $idxfull && !(-d $idxfull)) {
-			$cgi_pwd = $full;
-			$full = $idxfull;
-			$scriptname .= "/" if ($scriptname ne "/");
-			last;
-			}
-		}
-	}
-if (-d $full) {
-	# This is definately a directory.. list it
-	&write_data("HTTP/1.0 $ok_code $ok_message\r\n");
-	&write_data("Date: $datestr\r\n");
-	&write_data("Server: $config{server}\r\n");
-	&write_data("Content-type: text/html\r\n");
-	&write_keep_alive(0);
-	&write_data("\r\n");
-	&reset_byte_count();
-	&write_data("<h1>Index of $simple</h1>\n");
-	&write_data("<pre>\n");
-	&write_data(sprintf "%-35.35s %-20.20s %-10.10s\n",
-			"Name", "Last Modified", "Size");
-	&write_data("<hr>\n");
-	opendir(DIR, $full);
-	while($df = readdir(DIR)) {
-		if ($df =~ /^\./) { next; }
-		(@stbuf = stat("$full/$df")) || next;
-		if (-d "$full/$df") { $df .= "/"; }
-		@tm = localtime($stbuf[9]);
-		$fdate = sprintf "%2.2d/%2.2d/%4.4d %2.2d:%2.2d:%2.2d",
-				$tm[3],$tm[4]+1,$tm[5]+1900,
-				$tm[0],$tm[1],$tm[2];
-		$len = length($df); $rest = " "x(35-$len);
-		&write_data(sprintf 
-		 "<a href=\"%s\">%-${len}.${len}s</a>$rest %-20.20s %-10.10s\n",
-		 $df, $df, $fdate, $stbuf[7]);
-		}
-	closedir(DIR);
-	&log_request($acpthost, $authuser, $reqline, $ok_code, &byte_count());
-	return 0;
-	}
-
-# CGI or normal file
-local $rv;
-if (&get_type($full) eq "internal/cgi") {
-	# A CGI program to execute
-	$envtz = $ENV{"TZ"};
-	$envuser = $ENV{"USER"};
-	$envpath = $ENV{"PATH"};
-	foreach (keys %ENV) { delete($ENV{$_}); }
-	$ENV{"PATH"} = $envpath if ($envpath);
-	$ENV{"TZ"} = $envtz if ($envtz);
-	$ENV{"USER"} = $envuser if ($envuser);
-	$ENV{"HOME"} = $user_homedir;
-	$ENV{"SERVER_SOFTWARE"} = $config{"server"};
-	$ENV{"SERVER_NAME"} = $host;
-	$ENV{"SERVER_ADMIN"} = $config{"email"};
-	$ENV{"SERVER_ROOT"} = $config{"root"};
-	$ENV{"SERVER_PORT"} = $port;
-	$ENV{"REMOTE_HOST"} = $acpthost;
-	$ENV{"REMOTE_ADDR"} = $acptip;
-	$ENV{"REMOTE_USER"} = $authuser if (defined($authuser));
-	$ENV{"SSL_USER"} = $peername if ($validated == 2);
-	$ENV{"DOCUMENT_ROOT"} = $config{"root"};
-	$ENV{"GATEWAY_INTERFACE"} = "CGI/1.1";
-	$ENV{"SERVER_PROTOCOL"} = "HTTP/1.0";
-	$ENV{"REQUEST_METHOD"} = $method;
-	$ENV{"SCRIPT_NAME"} = $scriptname;
-	$ENV{"REQUEST_URI"} = $request_uri;
-	$ENV{"PATH_INFO"} = $pathinfo;
-	$ENV{"PATH_TRANSLATED"} = "$config{root}/$pathinfo";
-	$ENV{"QUERY_STRING"} = $querystring;
-	$ENV{"MINISERV_CONFIG"} = $conf;
-	$ENV{"HTTPS"} = "ON" if ($use_ssl);
-	$ENV{"SESSION_ID"} = $session_id if ($session_id);
-	$ENV{"LOCAL_USER"} = $localauth_user if ($localauth_user);
-	if (defined($header{"content-length"})) {
-		$ENV{"CONTENT_LENGTH"} = $header{"content-length"};
-		}
-	if (defined($header{"content-type"})) {
-		$ENV{"CONTENT_TYPE"} = $header{"content-type"};
-		}
-	foreach $h (keys %header) {
-		($hname = $h) =~ tr/a-z/A-Z/;
-		$hname =~ s/\-/_/g;
-		$ENV{"HTTP_$hname"} = $header{$h};
-		}
-	$ENV{"PWD"} = $cgi_pwd;
-	foreach $k (keys %config) {
-		if ($k =~ /^env_(\S+)$/) {
-			$ENV{$1} = $config{$k};
-			}
-		}
-	delete($ENV{'HTTP_AUTHORIZATION'});
-	$ENV{'HTTP_COOKIE'} =~ s/;?\s*sid=(\d+)//;
-
-	# Check if the CGI can be handled internally
-	open(CGI, $full);
-	local $first = <CGI>;
-	close(CGI);
-	$first =~ s/[#!\r\n]//g;
-	$nph_script = ($full =~ /\/nph-([^\/]+)$/);
-	if (!$config{'forkcgis'} && $first eq $perl_path && $] >= 5.004) {
-		# setup environment for eval
-		chdir($ENV{"PWD"});
-		@ARGV = split(/\s+/, $queryargs);
-		$0 = $full;
-		if ($posted_data) {
-			# Already read the post input
-			$postinput = $posted_data;
-			}
-		elsif ($method eq "POST") {
-			$clen = $header{"content-length"};
-			while(length($postinput) < $clen) {
-				$buf = &read_data($clen - length($postinput));
-				if (!length($buf)) {
-					&http_error(500, "Failed to read ".
-							 "POST request");
-					}
-				$postinput .= $buf;
-				}
-			}
-		$SIG{'CHLD'} = 'DEFAULT';
-		eval {
-			# Have SOCK closed if the perl exec's something
-			use Fcntl;
-			fcntl(SOCK, F_SETFD, FD_CLOEXEC);
-			};
-		shutdown(SOCK, 0);
-
-		if ($config{'log'}) {
-			open(MINISERVLOG, ">>$config{'logfile'}");
-			chmod(0600, $config{'logfile'});
-			}
-		$doing_eval = 1;
-		eval {
-			package main;
-			tie(*STDOUT, 'miniserv');
-			tie(*STDIN, 'miniserv');
-			do $miniserv::full;
-			die $@ if ($@);
-			};
-		$doing_eval = 0;
-		if ($@) {
-			# Error in perl!
-			&http_error(500, "Perl execution failed", $@);
-			}
-		elsif (!$doneheaders && !$nph_script) {
-			&http_error(500, "Missing Headers");
-			}
-		#close(SOCK);
-		$rv = 0;
-		}
-	else {
-		# fork the process that actually executes the CGI
-		pipe(CGIINr, CGIINw);
-		pipe(CGIOUTr, CGIOUTw);
-		pipe(CGIERRr, CGIERRw);
-		if (!($cgipid = fork())) {
-			chdir($ENV{"PWD"});
-			close(SOCK);
-			open(STDIN, "<&CGIINr");
-			open(STDOUT, ">&CGIOUTw");
-			open(STDERR, ">&CGIERRw");
-			close(CGIINw); close(CGIOUTr); close(CGIERRr);
-			exec($full, split(/\s+/, $queryargs));
-			print STDERR "Failed to exec $full : $!\n";
-			exit;
-			}
-		close(CGIINr); close(CGIOUTw); close(CGIERRw);
-
-		# send post data
-		if ($posted_data) {
-			# already read the posted data
-			print CGIINw $posted_data;
-			}
-		elsif ($method eq "POST") {
-			$got = 0; $clen = $header{"content-length"};
-			while($got < $clen) {
-				$buf = &read_data($clen-$got);
-				if (!length($buf)) {
-					kill('TERM', $cgipid);
-					&http_error(500, "Failed to read ".
-							 "POST request");
-					}
-				$got += length($buf);
-				print CGIINw $buf;
-				}
-			}
-		close(CGIINw);
-		shutdown(SOCK, 0);
-
-		if (!$nph_script) {
-			# read back cgi headers
-			select(CGIOUTr); $|=1; select(STDOUT);
-			$got_blank = 0;
-			while(1) {
-				$line = <CGIOUTr>;
-				$line =~ s/\r|\n//g;
-				if ($line eq "") {
-					if ($got_blank || %cgiheader) { last; }
-					$got_blank++;
-					next;
-					}
-				($line =~ /^(\S+):\s+(.*)$/) ||
-					&http_error(500, "Bad Header",
-						    &read_errors(CGIERRr));
-				$cgiheader{lc($1)} = $2;
-				}
-			if ($cgiheader{"location"}) {
-				&write_data("HTTP/1.0 302 Moved Temporarily\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{'server'}\r\n");
-				&write_keep_alive(0);
-				# ignore the rest of the output. This is a hack, but
-				# is necessary for IE in some cases :(
-				close(CGIOUTr); close(CGIERRr);
-				}
-			elsif ($cgiheader{"content-type"} eq "") {
-				&http_error(500, "Missing Content-Type Header",
-					    &read_errors(CGIERRr));
-				}
-			else {
-				&write_data("HTTP/1.0 $ok_code $ok_message\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{'server'}\r\n");
-				&write_keep_alive(0);
-				}
-			foreach $h (keys %cgiheader) {
-				&write_data("$h: $cgiheader{$h}\r\n");
-				}
-			&write_data("\r\n");
-			}
-		&reset_byte_count();
-		while($line = <CGIOUTr>) {
-			&write_data($line);
-			}
-		close(CGIOUTr); close(CGIERRr);
-		$rv = 0;
-		}
-	}
-else {
-	# A file to output
-	local @st = stat($full);
-	open(FILE, $full) || &http_error(404, "Failed to open file");
-	&write_data("HTTP/1.0 $ok_code $ok_message\r\n");
-	&write_data("Date: $datestr\r\n");
-	&write_data("Server: $config{server}\r\n");
-	&write_data("Content-type: ".&get_type($full)."\r\n");
-	&write_data("Content-length: $st[7]\r\n");
-	&write_data("Last-Modified: ".&http_date($st[9])."\r\n");
-	&write_keep_alive();
-	&write_data("\r\n");
-	&reset_byte_count();
-	while(read(FILE, $buf, 1024) > 0) {
-		&write_data($buf);
-		}
-	close(FILE);
-	$rv = &check_keep_alive();
-	}
-
-# log the request
-&log_request($acpthost, $authuser, $reqline,
-	     $cgiheader{"location"} ? "302" : $ok_code, &byte_count());
-return $rv;
-}
-
-# http_error(code, message, body, [dontexit])
-sub http_error
-{
-close(CGIOUT);
-local $eh = $error_handler_recurse ? undef :
-	    $config{"error_handler_$_[0]"} ? $config{"error_handler_$_[0]"} :
-	    $config{'error_handler'} ? $config{'error_handler'} : undef;
-if ($eh) {
-	# Call a CGI program for the error
-	$page = "/$eh";
-	$querystring = "code=$_[0]&message=".&urlize($_[1]).
-		       "&body=".&urlize($_[2]);
-	$error_handler_recurse++;
-	$ok_code = $_[0];
-	$ok_message = $_[1];
-	goto rerun;
-	}
-else {
-	# Use the standard error message display
-	&write_data("HTTP/1.0 $_[0] $_[1]\r\n");
-	&write_data("Server: $config{server}\r\n");
-	&write_data("Date: $datestr\r\n");
-	&write_data("Content-type: text/html\r\n");
-	&write_keep_alive(0);
-	&write_data("\r\n");
-	&reset_byte_count();
-	&write_data("<h1>Error - $_[1]</h1>\n");
-	if ($_[2]) {
-		&write_data("<pre>$_[2]</pre>\n");
-		}
-	}
-&log_request($acpthost, $authuser, $reqline, $_[0], &byte_count())
-	if ($reqline);
-shutdown(SOCK, 1);
-exit if (!$_[3]);
-}
-
-sub get_type
-{
-if ($_[0] =~ /\.([A-z0-9]+)$/) {
-	$t = $mime{$1};
-	if ($t ne "") {
-		return $t;
-		}
-	}
-return "text/plain";
-}
-
-# simplify_path(path, bogus)
-# Given a path, maybe containing stuff like ".." and "." convert it to a
-# clean, absolute form.
-sub simplify_path
-{
-local($dir, @bits, @fixedbits, $b);
-$dir = $_[0];
-$dir =~ s/^\/+//g;
-$dir =~ s/\/+$//g;
-@bits = split(/\/+/, $dir);
-@fixedbits = ();
-$_[1] = 0;
-foreach $b (@bits) {
-        if ($b eq ".") {
-                # Do nothing..
-                }
-        elsif ($b eq "..") {
-                # Remove last dir
-                if (scalar(@fixedbits) == 0) {
-                        $_[1] = 1;
-                        return "/";
-                        }
-                pop(@fixedbits);
-                }
-        else {
-                # Add dir to list
-                push(@fixedbits, $b);
-                }
-        }
-return "/" . join('/', @fixedbits);
-}
-
-# b64decode(string)
-# Converts a string from base64 format to normal
-sub b64decode
-{
-    local($str) = $_[0];
-    local($res);
-    $str =~ tr|A-Za-z0-9+=/||cd;
-    $str =~ s/=+$//;
-    $str =~ tr|A-Za-z0-9+/| -_|;
-    while ($str =~ /(.{1,60})/gs) {
-        my $len = chr(32 + length($1)*3/4);
-        $res .= unpack("u", $len . $1 );
-    }
-    return $res;
-}
-
-# ip_match(remoteip, localip, [match]+)
-# Checks an IP address against a list of IPs, networks and networks/masks
-sub ip_match
-{
-local(@io, @mo, @ms, $i, $j);
-@io = split(/\./, $_[0]);
-local $hn;
-if (!defined($hn = $ip_match_cache{$_[0]})) {
-	$hn = gethostbyaddr(inet_aton($_[0]), AF_INET);
-	$hn = "" if ((&to_ipaddress($hn))[0] ne $_[0]);
-	$ip_match_cache{$_[0]} = $hn;
-	}
-for($i=2; $i<@_; $i++) {
-	local $mismatch = 0;
-	if ($_[$i] =~ /^(\S+)\/(\S+)$/) {
-		# Compare with network/mask
-		@mo = split(/\./, $1); @ms = split(/\./, $2);
-		for($j=0; $j<4; $j++) {
-			if ((int($io[$j]) & int($ms[$j])) != int($mo[$j])) {
-				$mismatch = 1;
-				}
-			}
-		}
-	elsif ($_[$i] =~ /^\*(\S+)$/) {
-		# Compare with hostname regexp
-		$mismatch = 1 if ($hn !~ /$1$/);
-		}
-	elsif ($_[$i] eq 'LOCAL') {
-		# Compare with local network
-		local @lo = split(/\./, $_[1]);
-		if ($lo[0] < 128) {
-			$mismatch = 1 if ($lo[0] != $io[0]);
-			}
-		elsif ($lo[0] < 192) {
-			$mismatch = 1 if ($lo[0] != $io[0] ||
-					  $lo[1] != $io[1]);
-			}
-		else {
-			$mismatch = 1 if ($lo[0] != $io[0] ||
-					  $lo[1] != $io[1] ||
-					  $lo[2] != $io[2]);
-			}
-		}
-	else {
-		# Compare with IP or network
-		@mo = split(/\./, $_[$i]);
-		while(@mo && !$mo[$#mo]) { pop(@mo); }
-		for($j=0; $j<@mo; $j++) {
-			if ($mo[$j] != $io[$j]) {
-				$mismatch = 1;
-				}
-			}
-		}
-	return 1 if (!$mismatch);
-	}
-return 0;
-}
-
-# restart_miniserv()
-# Called when a SIGHUP is received to restart the web server. This is done
-# by exec()ing perl with the same command line as was originally used
-sub restart_miniserv
-{
-close(SOCK); close(MAIN);
-foreach $p (@passin) { close($p); }
-foreach $p (@passout) { close($p); }
-if ($logclearer) { kill('TERM', $logclearer);	}
-exec($perl_path, $miniserv_path, @miniserv_argv);
-die "Failed to restart miniserv with $perl_path $miniserv_path";
-}
-
-sub trigger_restart
-{
-$need_restart = 1;
-}
-
-sub to_ipaddress
-{
-local (@rv, $i);
-foreach $i (@_) {
-	if ($i =~ /(\S+)\/(\S+)/ || $i =~ /^\*\S+$/ ||
-	    $i eq 'LOCAL') { push(@rv, $i); }
-	else { push(@rv, join('.', unpack("CCCC", inet_aton($i)))); }
-	}
-return @rv;
-}
-
-# read_line()
-# Reads one line from SOCK or SSL
-sub read_line
-{
-local($idx, $more, $rv);
-if ($use_ssl) {
-	while(($idx = index($read_buffer, "\n")) < 0) {
-		# need to read more..
-		if (!($more = Net::SSLeay::read($ssl_con))) {
-			# end of the data
-			$rv = $read_buffer;
-			undef($read_buffer);
-			return $rv;
-			}
-		$read_buffer .= $more;
-		}
-	$rv = substr($read_buffer, 0, $idx+1);
-	$read_buffer = substr($read_buffer, $idx+1);
-	return $rv;
-	}
-else { return <SOCK>; }
-}
-
-# read_data(length)
-# Reads up to some amount of data from SOCK or the SSL connection
-sub read_data
-{
-if ($use_ssl) {
-	local($rv);
-	if (length($read_buffer)) {
-		$rv = $read_buffer;
-		undef($read_buffer);
-		return $rv;
-		}
-	else {
-		return Net::SSLeay::read($ssl_con, $_[0]);
-		}
-	}
-else {
-	local $buf;
-	read(SOCK, $buf, $_[0]) || return undef;
-	return $buf;
-	}
-}
-
-# write_data(data)
-# Writes a string to SOCK or the SSL connection
-sub write_data
-{
-if ($use_ssl) {
-	Net::SSLeay::write($ssl_con, $_[0]);
-	}
-else {
-	syswrite(SOCK, $_[0], length($_[0]));
-	}
-$write_data_count += length($_[0]);
-}
-
-# reset_byte_count()
-sub reset_byte_count { $write_data_count = 0; }
-
-# byte_count()
-sub byte_count { return $write_data_count; }
-
-# log_request(hostname, user, request, code, bytes)
-sub log_request
-{
-if ($config{'log'}) {
-	local(@tm, $dstr, $user, $ident, $headers);
-	if ($config{'logident'}) {
-		# add support for rfc1413 identity checking here
-		}
-	else { $ident = "-"; }
-	@tm = localtime(time());
-	$dstr = sprintf "%2.2d/%s/%4.4d:%2.2d:%2.2d:%2.2d %s",
-			$tm[3], $make_date_marr[$tm[4]], $tm[5]+1900,
-	                $tm[2], $tm[1], $tm[0], $timezone;
-	$user = $_[1] ? $_[1] : "-";
-	if (fileno(MINISERVLOG)) {
-		seek(MINISERVLOG, 0, 2);
-		}
-	else {
-		open(MINISERVLOG, ">>$config{'logfile'}");
-		chmod(0600, $config{'logfile'});
-		}
-	foreach $h (split(/\s+/, $config{'logheaders'})) {
-		$headers .= " $h=\"$header{$h}\"";
-		}
-	print MINISERVLOG "$_[0] $ident $user [$dstr] \"$_[2]\" ",
-			  "$_[3] $_[4]$headers\n";
-	close(MINISERVLOG);
-	}
-}
-
-# read_errors(handle)
-# Read and return all input from some filehandle
-sub read_errors
-{
-local($fh, $_, $rv);
-$fh = $_[0];
-while(<$fh>) { $rv .= $_; }
-return $rv;
-}
-
-sub write_keep_alive
-{
-local $mode;
-if (@_) { $mode = $_[0]; }
-else { $mode = &check_keep_alive(); }
-&write_data("Connection: ".($mode ? "Keep-Alive" : "close")."\r\n");
-}
-
-sub check_keep_alive
-{
-return $header{'connection'} =~ /keep-alive/i;
-}
-
-sub term_handler
-{
-if (@childpids) {
-	kill('TERM', @childpids);
-	}
-exit(1);
-}
-
-sub http_date
-{
-local @tm = gmtime($_[0]);
-return sprintf "%s, %d %s %d %2.2d:%2.2d:%2.2d GMT",
-		$weekday[$tm[6]], $tm[3], $month[$tm[4]], $tm[5]+1900,
-		$tm[2], $tm[1], $tm[0];
-}
-
-sub TIEHANDLE
-{
-my $i; bless \$i, shift;
-}
- 
-sub WRITE
-{
-$r = shift;
-my($buf,$len,$offset) = @_;
-&write_to_sock(substr($buf, $offset, $len));
-}
- 
-sub PRINT
-{
-$r = shift;
-$$r++;
-&write_to_sock(@_);
-}
- 
-sub PRINTF
-{
-shift;
-my $fmt = shift;
-&write_to_sock(sprintf $fmt, @_);
-}
- 
-sub READ
-{
-$r = shift;
-substr($_[0], $_[2], $_[1]) = substr($postinput, $postpos, $_[1]);
-$postpos += $_[1];
-}
-
-sub OPEN
-{
-print STDERR "open() called - should never happen!\n";
-}
- 
-sub READLINE
-{
-if ($postpos >= length($postinput)) {
-	return undef;
-	}
-local $idx = index($postinput, "\n", $postpos);
-if ($idx < 0) {
-	local $rv = substr($postinput, $postpos);
-	$postpos = length($postinput);
-	return $rv;
-	}
-else {
-	local $rv = substr($postinput, $postpos, $idx-$postpos+1);
-	$postpos = $idx+1;
-	return $rv;
-	}
-}
- 
-sub GETC
-{
-return $postpos >= length($postinput) ? undef
-				      : substr($postinput, $postpos++, 1);
-}
- 
-sub CLOSE { }
- 
-sub DESTROY { }
-
-# write_to_sock(data, ...)
-sub write_to_sock
-{
-foreach $d (@_) {
-	if ($doneheaders || $miniserv::nph_script) {
-		&write_data($d);
-		}
-	else {
-		$headers .= $d;
-		while(!$doneheaders && $headers =~ s/^(.*)(\r)?\n//) {
-			if ($1 =~ /^(\S+):\s+(.*)$/) {
-				$cgiheader{lc($1)} = $2;
-				}
-			elsif ($1 !~ /\S/) {
-				$doneheaders++;
-				}
-			else {
-				&http_error(500, "Bad Header");
-				}
-			}
-		if ($doneheaders) {
-			if ($cgiheader{"location"}) {
-				&write_data(
-					"HTTP/1.0 302 Moved Temporarily\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{server}\r\n");
-				&write_keep_alive(0);
-				}
-			elsif ($cgiheader{"content-type"} eq "") {
-				&http_error(500, "Missing Content-Type Header");
-				}
-			else {
-				&write_data("HTTP/1.0 $ok_code $ok_message\r\n");
-				&write_data("Date: $datestr\r\n");
-				&write_data("Server: $config{server}\r\n");
-				&write_keep_alive(0);
-				}
-			foreach $h (keys %cgiheader) {
-				&write_data("$h: $cgiheader{$h}\r\n");
-				}
-			&write_data("\r\n");
-			&reset_byte_count();
-			&write_data($headers);
-			}
-		}
-	}
-}
-
-sub verify_client
-{
-local $cert = Net::SSLeay::X509_STORE_CTX_get_current_cert($_[1]);
-if ($cert) {
-	local $errnum = Net::SSLeay::X509_STORE_CTX_get_error($_[1]);
-	$verified_client = 1 if (!$errnum);
-	}
-return 1;
-}
-
-sub END
-{
-if ($doing_eval) {
-	# A CGI program called exit! This is a horrible hack to 
-	# finish up before really exiting
-	close(SOCK);
-	&log_request($acpthost, $authuser, $reqline,
-		     $cgiheader{"location"} ? "302" : $ok_code, &byte_count());
-	}
-}
-
-# urlize
-# Convert a string to a form ok for putting in a URL
-sub urlize {
-  local($tmp, $tmp2, $c);
-  $tmp = $_[0];
-  $tmp2 = "";
-  while(($c = chop($tmp)) ne "") {
-	if ($c !~ /[A-z0-9]/) {
-		$c = sprintf("%%%2.2X", ord($c));
-		}
-	$tmp2 = $c . $tmp2;
-	}
-  return $tmp2;
-}
-
-# validate_user(username, password)
-sub validate_user
-{
-return 0 if (!$_[0] || !$users{$_[0]});
-if ($users{$_[0]} eq 'x' && $use_pam) {
-	$pam_username = $_[0];
-	$pam_password = $_[1];
-	local $pamh = new Authen::PAM("miniserv", $pam_username, \&pam_conv_func);
-	if (!ref($pamh)) {
-		print STDERR "PAM init failed : $pamh\n";
-		return 0;
-		}
-	local $pam_ret = $pamh->pam_authenticate();
-	return $pam_ret == PAM_SUCCESS ? 1 : 0;
-	}
-else {
-	return $users{$_[0]} eq crypt($_[1], $users{$_[0]}) ? 1 : 0;
-	}
-}
-
-# the PAM conversation function for interactive logins
-sub pam_conv_func
-{
-my @res;
-while ( @_ ) {
-	my $code = shift;
-	my $msg = shift;
-	my $ans = "";
-
-	$ans = $pam_username if ($code == PAM_PROMPT_ECHO_ON() );
-	$ans = $pam_password if ($code == PAM_PROMPT_ECHO_OFF() );
-
-	push @res, PAM_SUCCESS();
-	push @res, $ans;
-	}
-push @res, PAM_SUCCESS();
-return @res;
-}
-
diff --git a/perl-install/standalone/interactive_http/miniserv.users b/perl-install/standalone/interactive_http/miniserv.users
deleted file mode 100644
index f7338497a..000000000
--- a/perl-install/standalone/interactive_http/miniserv.users
+++ /dev/null
@@ -1 +0,0 @@
-root:x:0
diff --git a/perl-install/standalone/keyboarddrake b/perl-install/standalone/keyboarddrake
deleted file mode 100755
index 0ac98cb49..000000000
--- a/perl-install/standalone/keyboarddrake
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use keyboard;
-use Xconfigurator_consts;
-use common;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-local $_ = join '', @ARGV;
-
-/-h/ and die _("usage: keyboarddrake [--expert] [keyboard]\n");
-
-$::expert = /-expert/;
-
-print "[$::expert]\n";
-my $keyboard='';
-if ($::expert) { ($keyboard) = grep { !/^-/ } @ARGV;}
-print "[$keyboard]\n";
-my $in = 'interactive'->vnew('su', 'keyboard');
-
-begin:
-$::isEmbedded and kill USR2, $::CCPID;
-$keyboard ||= $in->ask_from_listf_(_("Keyboard"),
-				   _("Please, choose your keyboard layout."),
-				   \&keyboard::keyboard2text,
-				   [ keyboard::keyboards() ],
-				   keyboard::read());
-if ($keyboard) {
-    keyboard::keyboard2text($keyboard) or die "bad keyboard $keyboard\n";
-
-    my $isNotDelete = $::expert && !$in->ask_yesorno("BackSpace", _("Do you want the BackSpace to return Delete in console?"), 1);
-
-    my $kmap = keyboard::keyboard2kmap($keyboard);
-    system('loadkeys', $kmap);
-
-    my $xkb = keyboard::keyboard2xkb($keyboard);
-    system('setxkbmap', $xkb);
-
-    my $f = "/etc/X11/XF86Config";
-    my $g = "/etc/X11/XF86Config-4";
-
-    substInFile {
-	if (/^Section\s+"Keyboard"/ .. /^EndSection/) {
-	    s|^(\s*XkbLayout\s+).*|$1"$xkb"| 
-	      and $_ .= join '', map { "    $_\n" } @{$Xconfigurator::xkb_options{$xkb} || []};
-	    $_ = '' if m,^(\s*(XkbVariant|XkbOptions)\s+),; # remove existing one
-	}
-    } $f if -e $f && !$::testing;
-
-    substInFile {
-	if (/Identifier\s+"Keyboard1"/ .. /^EndSection/) {
-	    s|^(\s*Option\s+"XkbLayout"\s+).*|$1"$xkb"| 
-	      and $_ .= join '', map { /(\S+)(.*)/; qq(    Option "$1" $2\n) } @{$Xconfigurator::xkb_options{$xkb} || []};
-	    $_ = '' if m,^(\s*Option\s+"(XkbVariant|XkbOptions)"\s+),; # remove existing one
-	}
-    } $g if -e $g && !$::testing;
-
-    keyboard::write('', $keyboard, $isNotDelete);
-}
-
-if ($::isEmbedded) {
-    kill(USR1, $::CCPID);
-    $keyboard = '';
-    goto begin;
-} else {
-    $in->exit(0);
-}
diff --git a/perl-install/standalone/livedrake b/perl-install/standalone/livedrake
deleted file mode 100755
index 9c2af4c03..000000000
--- a/perl-install/standalone/livedrake
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use interactive;
-use run_program;
-use c;
-
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: livedrake [--testing]\n";
-
-$::testing = /-testing/;
-
-my $in = 'interactive'->vnew('su', 'default');
-
-my $cd_mntpoint = "/mnt/cdrom";
-
-while (! -x "$cd_mntpoint/Mandrake/mdkinst/usr/bin/perl-install/live_install") {
-    ejectCdrom();
-    $in->ask_okcancel(_("Change Cd-Rom"),
-_("Please insert the Installation Cd-Rom in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid live upgrade."), 1) or $in->exit(0);
-    run_program::run("mount", "/mnt/cdrom");
-}
-
-if (-x "$cd_mntpoint/Mandrake/mdkinst/usr/bin/perl-install/live_install") {
-    chdir "/$cd_mntpoint/Mandrake/mdkinst/usr/bin/perl-install/";
-    $::testing or exec "./live_install";
-}
-
-$in->ask_warn('', _("Unable to start live upgrade !!!\n"));
-$in->exit(1);
-
-sub ejectCdrom {
-    my ($cdrom) = @_;
-    $cdrom or cat_("/proc/mounts") =~ m|(/dev/\S+)\s+/mnt/cdrom\s| and $cdrom = $1;
-    $cdrom or cat_("/etc/fstab") =~ m|(/dev/\S+)\s+/mnt/cdrom\s| and $cdrom = $1;
-    my $f = eval { $cdrom && detect_devices::tryOpen($cdrom) } or return;
-    run_program::run("umount", "/mnt/cdrom");
-    ioctl $f, c::CDROM_LOCKDOOR(), 0;
-    ioctl $f, c::CDROMEJECT(), 1;
-}
diff --git a/perl-install/standalone/localedrake b/perl-install/standalone/localedrake
deleted file mode 100644
index ef72f498e..000000000
--- a/perl-install/standalone/localedrake
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use lang;
-use any;
-
-my ($klang, $country, $apply);
-
-foreach (@ARGV) {
-    $apply = /--apply/;
-    $klang = $1 if /--kde_lang=(.*)/;
-    $country = $1 if /--kde_country=(.*)/;
-}
-if ($klang) {
-    my $lang = lang::kde_lang_country2lang($klang, $country);
-    lang::write('', $lang, $>, 'dont_touch_kde_files') if $apply;
-
-    #- help KDE defaulting to the right charset
-    print lang::charset2kde_charset(lang::lang2charset($lang)), "\n";
-} else {
-    my ($lang) = lang::read('', $>);
-
-    my $in = 'interactive'->vnew;
-    if ($lang = any::selectLanguage($in, $lang)) {
-	lang::write('', $lang, $>);
-	if ($>) {
-	    if (my $wm = any::running_window_manager()) {
-		$in->ask_okcancel('', _("The change is done, but to be effective you must logout"), 1)
-		  && any::ask_window_manager_to_logout($wm);
-	    }
-	}
-    }
-    $in->exit(0);
-}
-
-
diff --git a/perl-install/standalone/logdrake b/perl-install/standalone/logdrake
deleted file mode 100755
index 3d9c2b8ab..000000000
--- a/perl-install/standalone/logdrake
+++ /dev/null
@@ -1,681 +0,0 @@
-#! /usr/bin/perl
-# $Id$
-
-# Copyright (C) 2001 MandrakeSoft
-# Yves Duret <yduret at mandrakesoft.com>
-# some code is Copyright: (C) 1999, Michael T. Babcock <mikebabcock@pobox.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-
-use POSIX;
-use Gtk;
-use lib qw(/usr/lib/libDrakX);
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use any;
-use Config;
-init Gtk;
-Gtk->set_locale;
-use my_gtk qw(:helpers :wrappers);
-
-use MDK::Common;
-use Data::Dumper;
-#-------------------------------------------------------------
-# i18n routines
-# IMPORTANT: next two routines have to be redefined here to
-#         get correct namespace (drakconf instead of libDrakX)
-#         (This version is now UTF8 compliant - Sg 2001-08-18)
-#-------------------------------------------------------------
-
-{
-    no warnings;
-    sub _ {
-	my $s = shift @_; my $t = translate($s);
-	sprintf $t, @_;
-    }
-
-    no warnings;
-    sub translate {
-	my ($s) = @_;
-	$s ? c::dgettext('drakconf', $s) : '';
-    }
-}
-
-$::isInstall and die "Not supported during install.\n";
-
-my $in = 'interactive'->vnew('su', 'default');
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-if ($::isEmbedded) {
-  print "EMBED\n";
-  print "parent XID\t$::XID\n";
-  print "mcc pid\t$::CCPID\n";
-}
-
-#- parse arguments list.
-for (@ARGV) {
-    /^--version$/ and die 'version: $Id$ '."\n";
-    /^--help$/ and die 'logdrake [--version] [--file=myfyle] [--word=myword] [--explain=regexp] [--alert]';
-    /^--explain=(.*)$/ and do { $::isExplain = ($::Explain) = $1; $::isFile=1; $::File="/var/log/explanations"; next };
-    /^--file=(.*)$/ and do { $::isFile = ($::File) = $1; next };
-    /^--word=(.*)$/ and do { $::isWord = ($::Word) = $1; next };
-    /^--alert$/ and do { alert_config(); quit(); };
-}
-
-$::isTail=1 if ($::isFile);
-$|= 1 if ($::isTail);
-my $h=chomp_(`hostname -s`);
-
-my $window = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-$window->signal_connect( delete_event => sub { $::isEmbedded ? kill('USR1', $::CCPID) : Gtk->exit(0) });
-$window->set_title( _("logdrake") );
-$window->set_policy(1, 1, 1);
-$window->border_width (5) unless ($::isEmbedded);
-#$window->set_default_size( 540,460 );
-
-my $cal = gtkset_sensitive(new Gtk::Calendar(),0);
-my (undef,undef,undef,$mday) = localtime(time);
-$cal->select_day($mday);
-my @months = qw(Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec);
-my $cal_mode=0;
-my $cal_butt = gtksignal_connect(new Gtk::CheckButton(_("Show only for the selected day")), clicked =>sub{$cal_mode =!$cal_mode; gtkset_sensitive($cal,$cal_mode);});
-
-### menus definition
-# the menus are not shown
-# but they provides shiny shortcut like C-q
-my @menu_items = ( 
-		  { path => _("/_File"), type => '<Branch>' },
-		  { path => _("/File/_New"), accelerator => _("<control>N"), callback => \&print_hello },
-		  { path => _("/File/_Open"), accelerator => _("<control>O"),callback => \&print_hello },
-		  { path => _("/File/_Save"), accelerator => _("<control>S"),callback => \&save },
-		  { path => _("/File/Save _As") },
-		  { path => _("/File/-"),type => '<Separator>' },
-		  { path => _("/File/_Quit"), accelerator => _("<control>Q"), callback => \&quit },
-		  { path => _("/_Options"), type => '<Branch>' },
-		  { path => _("/Options/Test") },
-		  { path => _("/_Help"),type => '<LastBranch>' },
-		  { path => _("/Help/_About...") } 
-		 );
-my $menubar = get_main_menu( $window );
-######### menus end
-
-
-########## font and colors
-my $n = Gtk::Gdk::Font->fontset_load(_("-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"));
-my $b = Gtk::Gdk::Font->fontset_load(_("-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"));
-
-#$black    = "\033[30m";
-#$red      = "\033[31m";
-#$green    = "\033[32m";
-#$yellow   = "\033[33m";
-#$blue     = "\033[34m";
-#$magenta  = "\033[35m";
-#$purple   = "\033[35m";
-#$cyan     = "\033[36m";
-#$white    = "\033[37m";
-#$darkgray = "\033[30m";
-#$col_norm =             "\033[00m";
-#$col_background =       "\033[07m";
-#$col_brighten =         "\033[01m";
-#$col_underline =        "\033[04m";
-#$col_blink =            "\033[05m";
-
-my $white    = my_gtk::gtkcolor(50400, 655, 20000);
-my $black    = my_gtk::gtkcolor(0, 0, 0);
-my $red      = my_gtk::gtkcolor(0xFFFF, 655, 655);
-my $green    = my_gtk::gtkcolor(0x0, 0x9898,0x0);
-my $yellow   = my_gtk::gtkcolor(0xFFFF, 0xD7D7, 0);
-my $blue     = my_gtk::gtkcolor(655, 655, 0xFFFF);
-my $magenta  = my_gtk::gtkcolor(0xFFFF, 655, 0xFFFF);
-my $purple   = my_gtk::gtkcolor(0xA0A0, 0x2020, 0xF0F0);
-my $cyan     = my_gtk::gtkcolor(0x0, 0x9898, 0x9898);
-my $darkgray = my_gtk::gtkcolor(0x2F2F, 0x4F4F, 0x4F4F);
-
-    
-# Define global terms:
-# Define good notables:
-my @word_good=("starting\n", "Freeing", "Detected", "starting.", "accepted.\n", "authenticated.\n", "Ready", "active", "reloading", "saved;", "restarting", "ONLINE\n");
-my @word_warn=("dangling", "closed.\n", "Assuming", "root", "root\n", "exiting\n", "missing", "Ignored", "adminalert:", "deleting", "OFFLINE\n");
-my @word_bad=("bad");
-my @word_note=("LOGIN", "DHCP_OFFER", "optimized", "reset:", "unloaded", "disconnected", "connect", "Successful", "registered\n");
-my @line_good=("up", "DHCP_ACK", "Cleaned", "Initializing", "Starting", "success", "successfully", "alive", "found", "ONLINE\n");
-my @line_warn=("warning:", "WARNING:", "invalid", "obsolete", "bad", "Password", "detected", "timeout", "timeout:", "attackalert:", "wrong", "Lame", "FAILED", "failing", "unknown", "obsolete", "stopped.\n", "terminating.", "disabled\n", "disabled", "Lost");
-my @line_bad=("DENY", "lost", "shutting", "dead", "DHCP_NAK", "failure;", "Unable", "inactive", "terminating", "refused", "rejected", "down", "OFFLINE\n", "error\n", "ERROR\n", "ERROR:", "error", "ERROR", "error:", "failed:");
-
-# Define specifics:
-my @daemons=("named");
-
-# Now define what we want to use when:
-my $col_good = $green;
-my $col_warn = $yellow;
-my $col_bad = $red;
-my $col_note = $purple;
-my $col=$cyan;
-
-######### font and colors end
-
-my %files = (
-	     "auth" => { file => "/var/log/auth.log", desc => _("Authentication") },
-	     "user" => { file => "/var/log/user.log", desc => _("User") },
-	     "messages" => { file => "/var/log/messages", desc => _("Messages") },
-	     "syslog" => { file => "/var/log/syslog", desc => _("Syslog") },
-	     "explanations" => { file => "/var/log/explanations", desc => _("Mandrake Tools Explanations")}
-);
-
-my $yy=gtkset_sensitive(gtksignal_connect(new Gtk::Button(_("search")) , clicked => \&search),0);
-my $log_text = new Gtk::Text(undef, undef);
-my $refcount_search;
-#### far from window
-gtkadd($window,
-       gtkpack_(new Gtk::VBox(0,5),
-		if_(!$::isExplain, 0, _("A tool to monitor your logs")),
-		if_(!$::isFile, 0, gtkadd(new Gtk::Frame(_("Settings")),
-					   gtkpack__(new Gtk::VBox(0,2),
-						     gtkpack__(new Gtk::VBox(0,2),
-							       # _("Show lines"),
-							       gtkpack__(new Gtk::HBox(0,0),
-									 " " . _("matching") . " ", $e_yes = new Gtk::Entry(),
-									 " " . _("but not matching") . " ", $e_no = new Gtk::Entry()
-									)
-							      ),
-						     gtkpack_(new Gtk::HBox(0,0),
-							      1, gtkadd(gtkset_border_width(new Gtk::Frame(_("Choose file")),2),
-									gtkpack (gtkset_border_width(new Gtk::VBox(0,0),0),
-										 map { ${"b_". $_} = gtksignal_connect(new Gtk::CheckButton($files{$_}{desc}), clicked=> sub{$refcount_search++;gtkset_sensitive($yy,$refcount_search)}) } keys %files,
-										)
-								       ),
-							      0, gtkadd(gtkset_border_width(new Gtk::Frame(_("Calendar")),2),
-									gtkpack__(gtkset_border_width(new Gtk::VBox(0,0),5),
-										  $cal_butt, $cal
-										 )
-								       )
-							      ),
-						     $yy,
-						    )
-					  )
-		   ),
-		!$::isExplain ? (1, gtkadd(new Gtk::Frame(_("Content of the file")),
-					 createScrolledWindow($log_text)
-					)) : (1, $log_text),
-		if_(!$::isExplain, 0, gtkadd (gtkset_border_width(gtkset_layout(new Gtk::HButtonBox,-end), 5),
-					      if_ (!$::isFile, gtksignal_connect(new Gtk::Button (_("Mail/SMS alert")), clicked => sub {eval {alert_config()};  
-																	if ($@ =~ /wizcancel/) {
-																	        $::Wizard_no_previous = 1;
-																		$::Wizard_no_cancel = 1;
-																		#$::Wizard_finished = 1;
-#																	        undef $::isWizard;
-																		$::WizardWindow->destroy if defined $::WizardWindow;
-																		undef $::WizardWindow;
-}; })),
-			   gtksignal_connect(new Gtk::Button (_("Save")), clicked => \&save),
-			   gtksignal_connect(new Gtk::Button ($::isEmbedded ? _("Cancel") : _("Quit")), clicked => \&quit)
-			  )
-		   )
-       	       )
-       
-      );
-
-$::isFile and gtkset_usize($log_text,400,500);
-$window->realize;
-$window->show_all();
-search() if ($::isFile);
-#Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill 'USR2', $::CCPID;
-Gtk->main;
-
-sub quit {
-$::isEmbedded ? kill('USR1', $::CCPID) : Gtk->exit(0);
-}
-
-#-------------------------------------------------------------
-# search functions
-#-------------------------------------------------------------
-sub search {
-    $log_text->backward_delete($log_text->get_length());
-    $log_text->freeze();
-    if ($::isFile) {
-	parse_file($::File);
-    } else {
-	foreach (keys %files) {
-	    parse_file($files{$_}{file}) if ${$::{"b_". $_}}->active 
-	};
-    }
-    $log_text->thaw();
-    Gtk->main_iteration while Gtk->events_pending;    
-}
-
-sub parse_file {
-  my $file = $_[0];
-
-  $file =~ s/\.gz$//;
-  my $i=0;
-  gtkadd(my $win_pb = (gtkset_modal new Gtk::Window(), 1),
-	 gtkpack(new Gtk::VBox(5,0), 
-		 " " . _("please wait, parsing file: %s", $files{$_}{desc}) . " ",
-		 my $pbar = new Gtk::ProgressBar()
-		)
-	);
-  $win_pb->set_position('center');
-  $win_pb->realize();
-  $win_pb->show_all();
-  my $ey = $e_yes->get_chars(0, -1);
-  my $en = $e_no->get_chars(0, -1);
-  $ey =~ s/ OR /\|/;
-  $ey =~ s/^\*$//;
-  $en =~ s/^\*$/.*/;
-  $ey = $ey .($::Word) if ($::isWord);
-
-  if ($cal_mode) {
-      my ($year, $month, $day) = $cal->get_date();
-      $ey= $months[$month]."\\s{1,2}$day\\s.*$ey.*\n";
-  }
-
-  my @all=catMaybeCompressed ($file);
-
-  if ($::isExplain) {
-      my (@t, $t);
-      while (@all) {
-	  $t = pop @all;
-	  next if ($t =~ /logdrake/);
-	  last if !($t =~ /$::Explain/);
-	  push @t, $t;
-      }
-      @all=reverse @t;
-  }
-
-  my $taille= @all;
-  foreach (@all) {
-      $i++;
-      if ($i % 10) { 
-	  $pbar->update($i/$taille);
-	  Gtk->main_iteration while Gtk->events_pending;
-      }
-      
-      if (($en eq "") and /$ey/i)     {logcolorize($_); next}
-      if ((! /$en/i) and /$ey/i)      {logcolorize($_); next}
-      if ((! /$en/i) and ($ey eq "")) {logcolorize($_); next}
-  }
-  $win_pb->destroy();
-
-  if ($::isTail) {
-      open F, $file or die "E: $!";
-      while (<F>) {}; #to prevent to output the file twice..
-      $log_text->set_point($log_text->get_length());
-      my $timer = Gtk->timeout_add( 1000, \&input_callback);
-  }     
-}
-
-sub input_callback  {
-    logcolorize($_) while <F>;
-    seek F, 0, 1;
-}
-
-
-##########################################################################################
-
-sub logcolorize {
-
-    # we get date & time if it is date & time (dmesg)
-    s/(\D{3} .. \d\d:\d\d:\d\d )//;
-    $timestamp=$1;
-    @rec = split;
-
-    log_output($cyan,$timestamp,$b); # date & time if any...
-    log_output(($rec[0] eq $h) ? $blue : $col,"$rec[0] ",$b);  # hostname
-    
-    if ($rec[1] eq "last") {
-	log_output($green," last message repeated ",$n);
-	log_output($green, $rec[4], $b);
-	log_output($green," times\n",$n);
-	return;
-    }
-    # Extract PID if present
-    if ($rec[1] =~ /\[(\d+)\]\:/) {
-	my($pid) = $1;
-	$rec[1]=~s/\[$1\]\:// ;
-	log_output ($green, $rec[1] ."[",$n);
-	log_output ($black, $pid,$b);
-	log_output ($green, "]: ",$n);
-    }
-    else {
-	log_output($green, $rec[1] ." ",$n);
-    }
-
- 
-    for ($therest=(2); $therest<=$#rec; $therest++) {
-	$col=$cyan;
-
-	# Check for keywords to highlight
-	foreach (@word_good) { $col=$col_good if ($_ eq $rec[$therest]);}
-	foreach (@word_warn) { $col=$col_warn if ($_ eq $rec[$therest]);}
-	foreach (@word_bad)  { $col=$col_bad  if ($_ eq $rec[$therest]);}
-	foreach (@word_note) { $col=$col_note if ($_ eq $rec[$therest]);}
-	
- 	# Watch for words that indicate entire lines should be highlighted
- 	#foreach (@line_good) { $col=$col_good if ($_ eq $rec[$therest]);}
- 	#foreach (@line_warn) { $col=$col_warn if ($_ eq $rec[$therest]);}
-	#foreach (@line_bad)  { $col=$col_bad  if ($_ eq $rec[$therest]);}
- 	
-	log_output($col,"$rec[$therest] ",$n);
-    }
-    log_output($black,"\n",$n);
-}
-
-
-sub log_output {
-      $log_text->insert($_[2],$_[0], undef,$_[1]);
-}
-
-
-#-------------------------------------------------------------
-# mail/sms alert
-#-------------------------------------------------------------
-
-sub alert_config {
-
-    $::isWizard = 1;
-    $::Wizard_pix_up = "wiz_drakgw.png";    # FIXME
-    $::Wizard_title = _("Mail/SMS alert");
-
-my $cron =q(#!/usr/bin/perl
-# generated by logdrake
-use MDK::Common;
-my $r= "*** ". chomp_(`date`) . " ***\n";
-
-);
-
-    my ($load,$mail,$email,$smtp,$sms,$smssend); 
-    $load=3;
-
-  begin:
-    $::Wizard_finished = 0;
-    $::Wizard_no_previous = 1;
-    $in->ask_okcancel(_("Mail/SMS alert configuration"),
-                      _("Welcome to the mail/SMS configuration utility.\n\nHere, you'll be able to set up the alert system.\n"),
-		      1) or quit();
-
-  step_service:
-    undef $::Wizard_no_previous;
-    my $l ={
-	    http => ["/etc/init.d/httpd", _("Apache is a World Wide Web server. It is used to serve HTML files and CGI."), '$r .= "Apache is not running\n" if (`[ -x /etc/init.d/httpd ] && LC_ALL=C /etc/init.d/httpd status` =~ /\*not\* running/);'],
-	    bind => ["/etc/init.d/named", _("named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."), ],
-	    ftp => ["/etc/init.d/proftpd", _("proftpd"), '$r .= "FTP server (proftpd) is not running\n" unless (`[ -x /etc/init.d/proftpd ] && /etc/init.d/proftpd status 2>&1 > /dev/null`);'],
-	    postfix => ["/etc/init.d/postfix", _("Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."), '$r .= "Postfix is not running\n" unless (`[ -x /etc/init.d/postfix ] && LC_ALL=C /etc/init.d/postfix status`);'],
-	    samba => ["/etc/init.d/smb", ("samba"), '$r .= "samba is not running\n" unless (`[ -x /etc/init.d/smb ] && LC_ALL=C /etc/init.d/smb status`);'],
-	    sshd => ["/etc/init.d/sshd", _("sshd"), '$r .= "sshd is not running\n" unless (`[ -x /etc/init.d/sshd ] && LC_ALL=C /etc/init.d/sshd status`);'],
-	    webmin => ["/etc/init.d/webmin", _("webmin"), '$r .= "webmin is not running\n" unless (`[ -x /etc/init.d/webmin ] && LC_ALL=C /etc/init.d/webmin status`);'],
-	    xinetd=> ["/etc/init.d/xinetd", _("xinetd"), '$r .= "xinetd is not running\n" unless (`[ -x /etc/init.d/xinetd ] && LC_ALL=C /etc/init.d/yxinetd status`);'],
-	   };
-
-    $in->ask_from(_("service setting"),
-		  _("You will receive an alert if one of the selected service is no more running"),
-		  [ map { {label => "$_", val=> \${$_}, type => "bool", text => "$l->{$_}[1]" }; } keys %$l
-		  ]) or goto begin;
-
-    $cron .= "#- check services\n";
-    for (keys %$l) {
-	$cron .= $l->{$_}[2]."\n" if (${$_}); 
-    }
-
-  step_load:
-    $in->ask_from(_("load setting"),
-		  _("You will receive an alert if the load is higher than this value"),
-		  [
-		   { label => "load ", val => \$load, type => 'range', min => 1, max => 50 },
-		  ]) or goto step_service;
-
-    $cron .= q@
-#- load
-my ($load) = split ' ', first(cat_("/proc/loadavg"));
-$r .= "Load is huge: $load\n" if ($load >@ . "$load);\n\n";
-    
-  step_output:
-    $::Wizard_no_previous = 1;
-    $::Wizard_finished = 1;
-    $in->ask_from(_("alert configuration"),
-		  _("Configure the way the system will alert you"),
-		  [
-		   { label => "mail", val => \$mail, type => "bool", text => "mail output" },
-		   { label => "email", val => \$email, disabled => sub { !$mail; }},
-		   #{ label => "smtp", val => \$smtp, disabled => sub { !$mail; } },
-		   { label => "" },
-		   { label => "sms output", val => \$sms, type => "bool", text => "You need to have smsend set up (works only for some countries)" },
-		   { label => "smssend output", val => \$smssend , disabled => sub {!$sms;}},
-		  ]) or goto step_load;
-
-#output("/etc/cron.hourly/logdrake_alert.pl", ($cron));
-    $cron .= q@#- report it@;
-    if ($mail) {
-	$cron .= q!
-open F, '|/usr/sbin/sendmail -oi -t';
-
-print F
-q(Subject: logdrake Mail Alert
-From: root@localhost
-To: ), "$email\n";
-print F $r;
-
-# EOF!;
-    } elsif ($sms) {
-	$in->do_pkgs->install('smssend');
-	$cron .= q!system(smssend !, $smssend, q! chomp_(`date`));!
-    }
-
-    undef $::isWizard; 
-    $::WizardWindow->destroy if defined $::WizardWindow;
-    undef $::WizardWindow;
-
-}
-
-
-#-------------------------------------------------------------
-# menu callback functions
-#-------------------------------------------------------------
-
-
-sub save {
-    #$file_dialog = new Gtk::FileSelection(_("Save as.."));
-    #$file_dialog->show();
-    $yy= $in->ask_file(_("Save as.."),"/root") or return;
-    output($yy,$log_text->get_chars(0,$log_text->get_length()));
-}
-
-sub print_hello {
-  print "mcdtg !\n";
-}
-
-sub get_main_menu {
-  my ($window) = @_;
-
-  my $accel_group = new Gtk::AccelGroup();
-  my $item_factory = new Gtk::ItemFactory( 'Gtk::MenuBar', '<main>', $accel_group );
-  $item_factory->create_items( @menu_items );
-  $window->add_accel_group( $accel_group );
-  return ( $item_factory->get_widget( '<main>' ) );
-}
-
-sub create_dialog {
-    my ($label, $c) = @_;
-    my $ret = 0;
-    my $dialog = new Gtk::Dialog;
-    $dialog->signal_connect ( delete_event => sub {Gtk->main_quit();});
-    $dialog->set_title(_("logdrake"));
-    $dialog->border_width(10);
-    $dialog->vbox->pack_start(new Gtk::Label($label),1,1,0);
-
-    my $button = new Gtk::Button _("OK");
-    $button->can_default(1);
-    $button->signal_connect(clicked => sub { $ret=1; $dialog->destroy(); Gtk->main_quit(); });
-    $dialog->action_area->pack_start($button, 1, 1, 0);
-    $button->grab_default;
-
-    if ($c) {
-	my $button2 = new Gtk::Button _("Cancel");
-	$button2->signal_connect(clicked => sub { $ret=0; $dialog->destroy(); Gtk->main_quit(); });
-	$button2->can_default(1);
-	$dialog->action_area->pack_start($button2, 1, 1, 0);
-    }
-
-    $dialog->show_all;
-    Gtk->main();
-    $ret;
-}
-
-sub destroy_window {
-	my($widget, $windowref, $w2) = @_;
-	$$windowref = undef;
-	$w2 = undef if defined $w2;
-	0;
-}
-
-
-# log
-# $Log$
-# Revision 1.15  2002/03/14 18:09:12  yduret
-# fix some bug
-#
-# Revision 1.14  2002/03/14 12:25:43  yduret
-# fix * bug in field matching/ not matching
-#
-# Revision 1.13  2002/03/05 06:56:27  yduret
-# mail alert: use eval {} to catch wizcancel
-#
-# Revision 1.12  2002/02/20 10:50:37  damien
-# cosmetic change, mcc compliance
-#
-# Revision 1.11  2002/02/05 11:26:29  damien
-# wizard updated
-#
-# Revision 1.10  2002/02/05 11:16:28  damien
-# correction for mcc.
-#
-# Revision 1.9  2002/02/04 14:02:14  damien
-# corrected typo. Yvounet, check your code!!
-#
-# Revision 1.8  2002/02/04 14:00:52  damien
-# embedded, explain
-#
-# Revision 1.7  2002/02/01 22:59:27  yduret
-# ergo fix thx dadou report
-#
-# Revision 1.6  2002/02/01 18:10:06  yduret
-# fix --explain=foo bug that prevent to show anything
-#
-# Revision 1.5  2002/02/01 10:01:39  pablo
-# changed some strings to make translation easier
-#
-# Revision 1.4  2002/01/29 23:19:31  yduret
-# logdrake is now under gi/perl-install/standalone
-#
-# Revision 1.32  2002/01/27 20:47:58  yduret
-# updated, added button in logdrake main screen, bug fix
-#
-# Revision 1.31  2002/01/27 01:58:23  yduret
-# added --alert feature
-#
-# Revision 1.30  2002/01/26 20:42:30  yduret
-# --explain= feature
-#
-# Revision 1.29  2001/09/15 15:44:22  siegel
-# added missing space in "matching" line
-#
-# Revision 1.28  2001/09/15 15:34:55  siegel
-# added missing _()
-#
-# Revision 1.27  2001/09/05 16:07:22  warly
-# fix regexp for day matching
-#
-# Revision 1.26  2001/09/03 20:34:37  yduret
-# remove ok boutton taht does nothing !
-#
-# Revision 1.25  2001/09/03 20:27:29  yduret
-# fix proper call to kill 'USRx'
-#
-# Revision 1.24  2001/09/03 20:26:25  yduret
-# fix
-#
-# Revision 1.23  2001/08/28 15:43:01  yduret
-# fix window size in embedded mode
-#
-# Revision 1.22  2001/08/27 12:22:03  yduret
-# back from chamonix
-#
-# Revision 1.21  2001/08/20 15:04:55  siegel
-# added "Gtk->set_locale;"
-#
-# Revision 1.20  2001/08/18 19:46:35  siegel
-# made i18n UTF8 compliant
-#
-# Revision 1.19  2001/08/13 09:57:55  yduret
-# added a timeout to watch file
-#
-# Revision 1.18  2001/08/10 10:36:17  yduret
-# fixes
-#
-# Revision 1.17  2001/08/10 10:20:53  yduret
-# calendar added more
-#
-# Revision 1.16  2001/08/10 09:28:35  yduret
-# added calendar functionnality
-#
-# Revision 1.15  2001/08/10 01:46:05  yduret
-# corrected vnew usage (thc gc)
-#
-# Revision 1.14  2001/08/06 14:58:12  yduret
-# added isFile mode for daminounet
-#
-# Revision 1.13  2001/08/03 05:49:10  yduret
-# really fixed bug when embeded in mcc
-# use plain english instead of bad french
-#
-# Revision 1.12  2001/08/02 08:28:18  pablo
-# update pot file, s/ :/:/ for English text
-#
-# Revision 1.11  2001/08/01 19:06:05  yduret
-# pour boblack
-#
-# Revision 1.10  2001/08/01 17:30:21  yduret
-# added mapping..
-#
-# Revision 1.9  2001/08/01 13:19:14  yduret
-# ask_many_from_list
-#
-# Revision 1.8  2001/07/19 13:24:54  pablo
-# updated Croatian file
-#
-# Revision 1.7  2001/07/16 16:48:21  yduret
-# update
-#
-# Revision 1.6  2001/07/03 19:40:48  pablo
-# updated Danish file,
-# i18n'd logdrake
-#
-# Revision 1.5  2001/07/03 08:54:43  yduret
-# powered by DrakX technologie
-#
-# Revision 1.4  2001/07/02 09:47:55  yduret
-# fix bug in regexp
-#
-# Revision 1.3  2001/06/29 16:14:01  yduret
-# great upgrade
-#
-# Revision 1.2  2001/06/28 10:50:27  yduret
-# full support of color
-#
-# Revision 1.1  2001/06/27 09:22:59  yduret
-# added it..
-#
diff --git a/perl-install/standalone/lsnetdrake b/perl-install/standalone/lsnetdrake
deleted file mode 100755
index 9865cee27..000000000
--- a/perl-install/standalone/lsnetdrake
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-use network::nfs;
-use network::smb;
-
-"@ARGV" =~ /-h/ and die "usage: lsnetdrake [-h] [--nfs] [--smb]\n";
-
-my $nfs = !@ARGV || "@ARGV" =~ /-(nfs)/;
-my $smb = !@ARGV || "@ARGV" =~ /-(smb)/;
-
-$| = 1;
-$ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-
-my @l;
-push @l, network::nfs->new if $nfs;
-push @l, network::smb->new if $smb;
-
-foreach my $class (@l) {
-    foreach my $server (sort_names($class->find_servers)) {
-	foreach (sort_names($class->find_exports($server))) {
-	    print $class->to_fullstring($_), "\n";
-	}
-    }
-}
-
-sub sort_names { 
-    sort { $a->{name} cmp $b->{name} } @_;
-}
diff --git a/perl-install/standalone/mousedrake b/perl-install/standalone/mousedrake
deleted file mode 100755
index 64501a531..000000000
--- a/perl-install/standalone/mousedrake
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use common;
-use interactive;
-use modules;
-use detect_devices;
-use Xconfig;
-use mouse;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: mousedrake [--auto] [--testing]\n";
-
-$::auto = /-auto/;
-$::testing = /-testing/;
-
-my $in = 'interactive'->vnew('su', 'mouse');
-
--r '/etc/modules.conf' and modules::mergein_conf('/etc/modules.conf');
-
-undef $::Plug;
-begin:
-my ($curr_env) = Xconfig::getinfoFromXF86Config('');
-my ($mouse) = mouse::detect() unless $::noauto;
-my $time_tag2;
-
-#- now try to merge $curr_env->{mouse} with $mouse.
-$mouse->{XMOUSETYPE} eq $curr_env->{mouse}{XMOUSETYPE} ||
-    $mouse->{XMOUSETYPE} eq 'PS/2' && ($curr_env->{mouse}{XMOUSETYPE} =~ m|PS/2| ||
-				       $curr_env->{mouse}{auxmouse}{XMOUSETYPE} =~ m|PS/2|) and $mouse = $curr_env->{mouse};
-
-$::isEmbedded and kill USR2, $::CCPID;
-if (!$mouse || !$::auto) {
-    $mouse ||= mouse::fullname2mouse("serial|Generic 2 Button Mouse");
-    if ($::isEmbedded && $in->isa('interactive_gtk')) {
-	require my_gtk;
-	my $time_tag = Gtk->timeout_add(100, sub {
-					    defined $::Plug && defined $::Plug->child or return 1;
-					    mouse::test_mouse_standalone($mouse,$::Plug->child);
-					    0;
-					});
-    }
-    my $name = $in->ask_from_treelistf('mousedrake', _("Please, choose the type of your mouse."), '|',
-				       sub { join '|', map { translate($_) } split '\|', $_[0] },
-				       [ mouse::fullnames ], 
-				       $mouse->{type} . '|' . $mouse->{name});
-    Gtk->timeout_remove($time_tag2) if $::isEmbedded  && $in->isa('interactive_gtk');
-    $name or $::isEmbedded ? do { kill(USR1, $::CCPID); goto begin } : $in->exit(0);
-    my $mouse_chosen = mouse::fullname2mouse($name);
-    $mouse->{type} eq $mouse_chosen->{type} && $mouse->{name} eq $mouse_chosen->{name} or $mouse = $mouse_chosen;
-
-    if ($mouse->{device} eq "usbmouse") {
-	my ($c) = grep { $_->{driver} =~ /usb-[ou]hci/ } detect_devices::pci_probe(0) or die _("no serial_usb found\n");
-	eval { modules::load($c->{driver}, "serial_usb") };
-    }
-
-    $mouse->{XEMU3} = 'yes' if $mouse->{nbuttons} < 3 && (!$::noauto || $in->ask_yesorno('', _("Emulate third button?"), 1));
-
-    $mouse->{device} = $in->ask_from_listf(_("Mouse Port"),
-					   _("Please choose on which serial port your mouse is connected to."),
-					   \&mouse::serial_port2text,
-					   [ mouse::serial_ports ],
-					   $mouse->{device},
-					  ) || goto begin if $mouse->{type} eq 'serial';
-}
-
-mouse::write_conf($mouse);
--e "/var/lock/subsys/gpm" and system "service", "gpm", "restart";
-
-$::isEmbedded ? kill(USR1, $::CCPID) : $in->exit(0);
-goto begin;
diff --git a/perl-install/standalone/net_monitor b/perl-install/standalone/net_monitor
deleted file mode 100755
index 72e15bf22..000000000
--- a/perl-install/standalone/net_monitor
+++ /dev/null
@@ -1,540 +0,0 @@
-#!/usr/bin/perl
-
-# Monitor
-
-# Copyright (C) 1999 MandrakeSoft (damien@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use Gtk;
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use my_gtk qw(:helpers :wrappers);
-#-use Data::Dumper;
-use common;
-use strict;
-use network::netconnect;
-use network::tools;
-use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file $connect_prog);
-
-if ("@ARGV" =~ /--help|-h/) {
-    print q(Network & Internet connection and monitoring application
-
---defaultintf interface : show this interface by default
---connect : connect to internet if not already connected
---disconnect : disconnect to internet if already connected
---force : used with (dis)connect : force (dis)connection.
---status : returns 1 if connected 0 otherwise, then exit.
---quiet : don't be interactive. To be used with (dis)connect.
-);
-    exit(0);
-}
-
-if ("@ARGV" =~ /--status/) { print connected(); exit(0) }
-my $force = "@ARGV" =~ /--force/;
-my $quiet = "@ARGV" =~ /--quiet/;
-my $connect = "@ARGV" =~ /--connect/;
-my $disconnect = "@ARGV" =~ /--disconnect/;
-my ($default_intf) = "@ARGV" =~ /--defaultintf (\w+)/;
-
-if ($force) {
-    $connect and system("/etc/sysconfig/network-scripts/net_cnx_up");
-    $disconnect and system("/etc/sysconfig/network-scripts/net_cnx_down");
-    $connect = $disconnect = 0;
-}
-$quiet and exit(0);
-init Gtk;
-my $in = 'interactive'->vnew('su', 'default');
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-
-
-my $window1 = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window -toplevel;
-$window1->signal_connect ( delete_event => sub { Gtk->exit(0); });
-$window1->set_position(1);
-$window1->set_title(_("Network Monitoring"));
-$window1->set_policy(1, 1, 1);
-$window1->set_border_width(5);
-#$::isEmbedded or $window1->set_usize(580, 320);
-
-my $colorr = my_gtk::gtkcolor(50400, 655, 20000);
-my $colort = my_gtk::gtkcolor(55400, 55400, 655);
-my $colora = my_gtk::gtkcolor(655, 50400, 655);
-my $isconnected=-1;
-my @interfaces;
-my $monitor = {};
-my $netcnx = {};
-my $netc = {};
-my $intf = {};
-my $c_time = 0;
-my $ct_tag;
-my $style= new Gtk::Style;
-$style->font(Gtk::Gdk::Font->fontset_load("-adobe-times-medium-r-normal-*-12-*-75-75-p-*-iso8859-*,*-r-*"));
-
-network::netconnect::load_conf($netcnx, $netc, $intf);
-network::netconnect::read_net_conf('', $netcnx, $netc);
-my $combo1 = new Gtk::Combo;
-$combo1->set_popdown_strings (network::netconnect::get_profiles() );
-$combo1->entry->set_text($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
-$combo1->entry->set_editable(0);
-MDK::Common::Globals::init(
-			   in => $in,
-			   prefix => '',
-			   connect_file => "/etc/sysconfig/network-scripts/net_cnx_up",
-			   disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down",
-			   connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg" );
-
-gtkadd($window1,
-       gtkpack_(new Gtk::VBox(0,5),
-		0, _("Network Monitoring"),
-		1, gtkpack_(new Gtk::HBox(0,5),
-			    1, my $notebook = new Gtk::Notebook,
-			    0, gtkpack_(new Gtk::VBox(0,5),
-					0, gtkadd(gtkset_shadow_type(new Gtk::Frame(_("Settings")), 'etched_out'),
-						  gtkpack__(gtkset_border_width(new Gtk::VBox(0,5),5),
-							    gtkpack__(new Gtk::HBox(0,0),
-								      _("Connection type: "), my $label_cnx_type = new Gtk::Label("")),
-							    gtkpack__(new Gtk::HBox(0,0),
-								      _("Profile "), $combo1)
-							   )
-						 ),
-					1, gtkadd(gtkset_shadow_type(new Gtk::Frame(_("Statistics")), 'etched_out'),
-						  gtkpack__(new Gtk::VBox(0,0),
-						  create_packtable({ col_spacings => 1, row_spacings => 1},
-						   [ "", "instantaneous" , "average"],
-						   [ _("Sending Speed:"), my $label_st = new Gtk::Label(""), my $label_sta=new Gtk::Label("na")],
-						   [ _("Receiving Speed:"),my $label_sr= new Gtk::Label(""), my $label_sra=new Gtk::Label("na")],
-								  ),
-						   gtkpack__(new Gtk::HBox(0,0), "  "._("Connection Time: "), my $label_ct = new Gtk::Label("")),
-							   )
-						 ),
-					0, gtkpack_(new Gtk::HBox(0,5),
-						   1, gtksignal_connect(my $button_connect = gtkset_sensitive(new Gtk::Button(), 0), clicked => \&connection),
-						   0, new Gtk::VSeparator,
-						   0, gtkpack(new Gtk::VBox(0,5),
-							      gtksignal_connect(new Gtk::Button(_("Logs")), clicked => sub {
-							        -e "/usr/sbin/logdrake"
-								  ? system('/usr/sbin/logdrake --file=/var/log/messages &')
-								    : system('/usr/X11R6/bin/xvt -e "tail -f /var/log/messages " &')
-						 }),
-							      gtksignal_connect(my $button_close = new Gtk::Button(_("Close")), clicked => sub { Gtk->exit(0) }),
-							     )
-						  )
-				       )
-			   ),
-		0, my $statusbar = new Gtk::Statusbar
-	       )
-      );
-$window1->show_all;
-$window1->realize;
-$combo1->entry->signal_connect( 'changed', sub {
-				    network::netconnect::set_profile($netcnx, $combo1->entry->get_text());
-				    network::netconnect::load_conf($netcnx, $netc, $intf);
-				    network::netconnect::set_net_conf($netcnx, $netc, $intf);
-				    network::netconnect::read_net_conf('', $netcnx, $netc);
-				});
-my $gct = new Gtk::Gdk::GC($window1->window);
-$gct->set_foreground($colort);
-my $gcr = new Gtk::Gdk::GC($window1->window);
-$gcr->set_foreground($colorr);
-my $gca = new Gtk::Gdk::GC($window1->window);
-$gca->set_foreground($colora);
-my ($pix_c_map, $pix_c_mask) = gtkcreate_png("net_c.png");
-my ($pix_d_map, $pix_d_mask) = gtkcreate_png("net_d.png");
-my ($pix_u_map, $pix_u_mask) = gtkcreate_png("net_u.png");
-$button_connect->add(gtkpack__(new Gtk::VBox(0,3),
-				   my $pix_c = new Gtk::Pixmap($pix_u_map, $pix_u_mask),
-				   my $label_c = new Gtk::Label(_("Wait please"))
-				  ));
-$statusbar->push(1, _("Wait please, testing your connection..."));
-$window1->show_all();
-#$window1->set_policy (1, 1, 1);
-my $time_tag = Gtk->timeout_add(1000, \&rescan);
-my $time_tag2 = Gtk->timeout_add(20000, \&update);
-
-update();
-rescan();
-while ($isconnected == -1) {
-    Gtk->main_iteration while Gtk->events_pending;
-}
-connection() if ($connect && !$isconnected || $disconnect && $isconnected);
-Gtk->main;
-Gtk->exit(0);
-
-my $during_connection;
-sub connection {
-    $during_connection = 1;
-    my $isconnected2 = $isconnected;
-    $button_connect->set_sensitive(0);
-    $button_close->set_sensitive(0);
-    $statusbar->pop(1);
-    $statusbar->push(1, $isconnected2 ? _("Disconnecting from Internet ") : _("Connecting to Internet "));
-    if(!$isconnected2) {
-	$c_time = time();
-	$ct_tag = Gtk->timeout_add(1000, sub {
-				       my ($sec,$min,$hour) = gmtime(time() - $c_time);
-				       my $e = sprintf ("%02d:%02d:%02d", $hour, $min, $sec);
-				       $label_ct->set($e); 1; });
-    } else { Gtk->timeout_remove($ct_tag) }
-    my $nb_point=1;
-    my $tag = Gtk->timeout_add(100, sub {
-				   $statusbar->pop(1);
-				   $statusbar->push(1, ($isconnected2 ? _("Disconnecting from Internet ") : _("Connecting to Internet "))
-						    . join('', map { "." } (1..$nb_point)));
-				   $nb_point++;
-				   1;
-			       });
-    my $netc = {};
-    my $tag2 = Gtk->timeout_add(10000, sub {
-				    Gtk->timeout_remove($tag);
-				    $statusbar->pop(1);
-				    $statusbar->push(1, $isconnected2 ? ( $isconnected ?
-									  _("Disconnection from Internet failed.") :
-									  _("Disconnection from Internet complete.")) :
-						     ( $isconnected ?
-						       _("Connection complete.") :
-						       _("Connection failed.\nVerify your configuration in the Mandrake Control Center."))
-						    );
-				    my $tag3 = Gtk->timeout_add(10000, sub {
-					    $statusbar->pop(1);
-					    $statusbar->push(1, $isconnected ? _("Connected") : _("Not connected"));
-					    0;
-					});
-				    $button_connect->set_sensitive(1);
-				    $button_close->set_sensitive(1);
-				    undef $during_connection;
-				    0;
-				});
-    Gtk->main_iteration while Gtk->events_pending;
-    $tag2 = Gtk->timeout_add(1000, sub { system( $isconnected2 ? "/etc/sysconfig/network-scripts/net_cnx_down &" : "/etc/sysconfig/network-scripts/net_cnx_up &"); 0; });
-}
-
-sub rescan {
-    get_val();
-    foreach(@interfaces) {
-	my $intf = $_;
-	my $recv = $monitor->{$intf}{val}->[0];
-	my $transmit = $monitor->{$intf}{val}->[8];
-	my $refr = $monitor->{$intf}{referencer};
-	my $reft = $monitor->{$intf}{referencet};
-	$monitor->{sr} += $recv - $refr;
-	$monitor->{st} += $transmit - $reft;
-
-	$monitor->{$intf}{recva} += $recv - $refr;
-	$monitor->{$intf}{recvan}++;
-	if ($monitor->{$intf}{recvan} > 9) {
-	    push(@{$monitor->{$intf}{stack_ra}}, $monitor->{$intf}{recva}/10);
-	    $monitor->{$intf}{recva} = $monitor->{$intf}{recvan} = 0;
-	} else { push(@{$monitor->{$intf}{stack_ra}}, -1) }
-	shift @{$monitor->{$intf}{stack_ra}} if @{$monitor->{$intf}{stack_ra}} > 250;
-
-	push(@{$monitor->{$intf}{stack_r}}, $recv - $refr);
-	shift @{$monitor->{$intf}{stack_r}} if @{$monitor->{$intf}{stack_r}} > 250;
-	$monitor->{$intf}{labelr}->set(formatXiB($recv - $monitor->{$intf}{initialr}));
-	$monitor->{$intf}{referencer} = $recv;
-
-	$monitor->{$intf}{transmita} += $transmit - $reft;
-	$monitor->{$intf}{transmitan}++;
-	if ($monitor->{$intf}{transmitan} > 9) {
-	    push(@{$monitor->{$intf}{stack_ta}}, $monitor->{$intf}{transmita}/10);
-	    $monitor->{$intf}{transmita} = $monitor->{$intf}{transmitan} = 0;
-	} else { push(@{$monitor->{$intf}{stack_ta}}, -1) }
-	shift @{$monitor->{$intf}{stack_ta}} if @{$monitor->{$intf}{stack_ta}} > 250;
-
-	push(@{$monitor->{$intf}{stack_t}}, $transmit - $reft);
-	shift @{$monitor->{$intf}{stack_t}} if @{$monitor->{$intf}{stack_t}} > 250;
-	$monitor->{$intf}{labelt}->set(formatXiB($transmit - $monitor->{$intf}{initialt}));
-	$monitor->{$intf}{referencet} = $transmit;
-
-	draw_monitor($monitor->{$intf});
-    }
-    $label_sr->set(formatXiB($monitor->{sr}) . "/s");
-    $label_st->set(formatXiB($monitor->{st}) . "/s");
-    $monitor->{sra} += $monitor->{sr};
-    $monitor->{sta} += $monitor->{st};
-    $monitor->{nba} ++;
-    if($monitor->{nba} > 9) {
-	$label_sra->set(formatXiB($monitor->{sra}/10) . "/s");
-	$label_sta->set(formatXiB($monitor->{sta}/10) . "/s");
-	$monitor->{sra} = 0;
-	$monitor->{sta} = 0;
-	$monitor->{nba} = 0;
-    }
-    $label_cnx_type->set($netcnx->{type});
-    $monitor->{$_} = 0 foreach ('sr', 'st');
-    1;
-}
-
-sub get_val {
-    my @ret;
-    my $a = cat_("/proc/net/dev");
-    $a =~ s/^.*?\n.*?\n//;
-    $a =~ s/^\s*lo:.*?\n//;
-    my @line = split(/\n/, $a);
-    foreach(@line) {
-	s/\s*(\w*)://;
-	my $intf=$1;
-	push (@ret,$intf);
-	$monitor->{$intf}{val} = [split()];
-	$monitor->{$intf}{intf} = $intf;
-    }
-    @ret;
-}
-
-sub change_color {
-    my ($color) = @_;
-    my $window = new Gtk::Window -toplevel;
-    my $doit;
-    $window->signal_connect ( delete_event => sub { Gtk->main_quit() });
-    $window->set_position(1);
-    $window->set_title(_("Color configuration"));
-    $window->set_border_width(5);
-    gtkadd(gtkset_modal($window,1),
-	   gtkpack_(new Gtk::VBox(0,5),
-		    1, my $colorsel = new Gtk::ColorSelection,
-		    0, gtkadd(gtkset_layout(new Gtk::HButtonBox, -end),
-			      gtksignal_connect(new Gtk::Button(_("OK")), clicked => sub { $doit=1; Gtk->main_quit() }),
-			      gtksignal_connect(new Gtk::Button(_("Cancel")), clicked => sub { Gtk->main_quit() }),
-			     )
-		   )
-	  );
-    $colorsel->set_color($color->red()/65535, $color->green()/65535, $color->blue()/65535, $color->pixel());
-    $window->show_all();
-    Gtk->main;
-    $window->destroy();
-    $doit or return $color;
-    my (@color) = $colorsel->get_color();
-    my_gtk::gtkcolor($color[0]*65535, $color[1]*65535, $color[2]*65535);
-}
-
-my $scale;
-sub update {
-    connected_bg(\$isconnected);
-    my @intfs = get_val();
-    if($combo1->entry->get_text ne ($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default")) {
-	$combo1->entry->set_text($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
-    }
-    foreach(@intfs) {
-	my $intf = $_;
-	if(!member($intf,@interfaces)) {
-	    $default_intf = $intf;
-	    $monitor->{$intf}{initialr} = $monitor->{$intf}{val}->[0];
-	    $monitor->{$intf}{initialt} = $monitor->{$intf}{val}->[8];
-	    $monitor->{$intf}{darea} = new Gtk::DrawingArea();
-	    $monitor->{$intf}{darea}->set_events(["pointer_motion_mask"]);
-	    $notebook->append_page(gtkshow(my $page = gtkpack_(new Gtk::VBox(0,0),
-					       0, gtkpack__(gtkset_border_width(new Gtk::HBox(0,0), 5),
-							    gtksize($monitor->{$intf}{darea},300, 150)),
-					       0, gtkpack_(new Gtk::HBox(0,0),
-							    1, gtkpack__(new Gtk::VBox(0,0),
-								      gtkpack__(gtkset_border_width(new Gtk::HBox(0,5), 5),
-										   gtksignal_connect(my $button_t = gtkset_relief(new Gtk::Button(), 'none'), clicked => sub {
-													 $colort = change_color($colort);
-													 $gct->set_foreground($colort);
-													 $_[0]->draw(undef);
-												     }),
-										   _("sent: "), $monitor->{$intf}{labelt} = new Gtk::Label("0")),
-								      gtkpack__(gtkset_border_width(new Gtk::HBox(0,5), 5),
-										   gtksignal_connect(my $button_r = gtkset_relief(new Gtk::Button(), 'none'), clicked => sub {
-													 $colorr = change_color($colorr);
-													 $gcr->set_foreground($colorr);
-													 $_[0]->draw(undef);
-												     }),
-										   _("received: "), $monitor->{$intf}{labelr} = new Gtk::Label("0")),
-								      gtkpack__(gtkset_border_width(new Gtk::HBox(0,5), 5),
-										   gtksignal_connect(my $button_a = gtkset_relief(new Gtk::Button(), 'none'), clicked => sub {
-													 $colora = change_color($colora);
-													 $gca->set_foreground($colora);
-													 $_[0]->draw(undef);
-												     }),
-										   _("average"))
-								     ),
-							    0, gtkpack__(gtkset_border_width(new Gtk::VBox(0,0), 5),
-							      gtkadd(gtkset_shadow_type(new Gtk::Frame(_("Local measure")), 'etched_out'),
-								     gtkpack__(gtkset_border_width(new Gtk::VBox(0,0), 5),
-									       gtkpack__(new Gtk::HBox(0,0),
-											 _('sent: '),
-											 my $measure_t = new Gtk::Label("0")
-											),
-									       gtkpack__(new Gtk::HBox(0,0),
-											 _('received: '),
-											 my $measure_r = new Gtk::Label("0")
-											)
-									      )
-									)
-									)
-							  )
-					       )),
-				   new Gtk::Label($intf));
-	    foreach my $i ([$button_t, $gct],[$button_r, $gcr],[$button_a, $gca]) {
-		$i->[0]->add(gtksignal_connect(gtkshow(gtksize(gtkset_usize(new Gtk::DrawingArea(), 10, 10), 10, 10)), expose_event => sub{ $_[0]->window->draw_rectangle ($i->[1], 1, 0, 0, 10, 10)} ));
-	    }
-	    $notebook->set_page($notebook->page_num($page));
-	    $monitor->{$intf}{page}=($notebook->page_num($page));
-	    $monitor->{$intf}{pixmap_db} = new Gtk::Gdk::Pixmap($monitor->{$intf}{darea}->window, 300, 150);
-	    $monitor->{$intf}{referencer} = $monitor->{$intf}{val}->[0];
-	    $monitor->{$intf}{referencet} = $monitor->{$intf}{val}->[8];
-	    $monitor->{$intf}{pixmap_db}->draw_rectangle ($monitor->{$intf}{darea}->style->black_gc, 1, 0, 0, 300, 150);
-	    $monitor->{$intf}{darea}->signal_connect( motion_notify_event =>
-					      sub { my ($w, $e) = @_;
-						    my $x = $e->{'x'} - 50;
-						    my $y = $e->{'y'};
-						    my $received = $x >= 0 ? $monitor->{$intf}{stack_r}[$x] : 0;
-						    my $transmitted = $x >= 0 ? $monitor->{$intf}{stack_t}[$x] : 0;
-						    my $type;
-						    $y * $scale / 150 < $transmitted and $type = _('transmitted');
-						    (150 - $y) * $scale / 150 < $received and $type = _('received');
-						    $measure_r->set(formatXiB($received));
-						    $measure_t->set(formatXiB($transmitted));
-						});
-	    $monitor->{$intf}{darea}->signal_connect( expose_event => sub {
-					$monitor->{$intf}{darea}->window->draw_pixmap ($monitor->{$intf}{darea}->style->bg_gc('normal'),
-								     $monitor->{$intf}{pixmap_db}, 0, 0, 0, 0, 300, 150);
-				    });
-	}
-    }
-    foreach(@interfaces) {
-	my $intf = $_;
-	if(!member($intf,@intfs)) {
-	    $notebook->remove_page($monitor->{$intf}{page});
-	}
-    }
-    @interfaces = @intfs;
-    my $netc={};
-    my $tmp;
-    connected_bg(\$tmp);
-    if(defined $tmp) {
-	$isconnected = $tmp;
-	if ($isconnected != -1 && !$during_connection) {
-	    if($isconnected && !in_ifconfig($netcnx->{NET_INTERFACE})) {
-		$isconnected=0;
-		$statusbar->pop(1);
-		$statusbar->push(1, _("Warning, another internet connexion has been detected, maybe using your network"));
-	    } else {
-		#- translators : $netcnx->{type} is the type of network connection (modem, adsl...)
-		$statusbar->pop(1);
-		$statusbar->push(1, $isconnected ? _("Connected") : _("Not connected"));
-	    }
-	    $label_c->set($isconnected ? _("Disconnect %s", $netcnx->{type}) : _("Connect %s", $netcnx->{type}));
-	    $isconnected ? $pix_c->set($pix_c_map, $pix_c_mask) : $pix_c->set($pix_d_map, $pix_d_mask);
-	    $button_connect->set_sensitive(1);
-	}
-    }
-    if (!(-e $connect_file && -e $disconnect_file)) {
-	$button_connect->set_sensitive(0);
-	$label_c->set("No internet connection configured");
-    }
-    1;
-}
-
-sub in_ifconfig {
-    my ($intf) = @_;
-    -e '/sbin/ifconfig' or return 1;
-    $intf eq '' and return 1;
-    `/sbin/ifconfig` =~ /$intf/;
-}
-
-sub draw_monitor {
-    my ($o) = @_;
-    defined $o->{darea} or return;
-    $o->{pixmap_db}->draw_rectangle ($o->{darea}->style->black_gc, 1, 0, 0, 300, 150);
-    my $maxr = 0;
-    foreach (@{$o->{stack_r}}) { $maxr = $_ if $_>$maxr }
-    my $maxt = 0;
-    foreach (@{$o->{stack_t}}) { $maxt = $_ if $_>$maxt }
-    my $ech = $maxr + $maxt;
-    $ech == 0 and $ech = 1;
-    $scale = $ech;
-    my $step=49;
-    foreach (@{$o->{stack_t}}) {
-	$o->{pixmap_db}->draw_rectangle($gct, 1, $step, 0, 1, $_*150/$ech);
-	$step++;
-    }
-    $step=49;
-    my ($av1, $av2, $last_a);
-    foreach (@{$o->{stack_ta}}) {
-	if($_ != -1) {
-	    if( !defined $av1) { $av1 = $_ } else { defined $av2 or $av2 = $_ }
-	    if ($av1 && $av2) {
-		$o->{pixmap_db}->draw_line($gca, $step-15, $av1*150/$ech, $step-5, $av2*150/$ech);
-		$av1 = $av2;
-		undef $av2;
-		$last_a = $step-50;
-	    }
-	}
-	$step++;
-    }
-    $step=49;
-    foreach (@{$o->{stack_r}}) {
-	$o->{pixmap_db}->draw_rectangle($gcr, 1, $step, 151-$_*150/$ech, 1, $_*150/$ech);
-	$step++;
-    }
-    $step=49;
-    ($av1, $av2) = undef;
-    foreach (@{$o->{stack_ra}}) {
-	if($_ != -1) {
-	    if(!defined $av1) { $av1 = $_ } else { defined $av2 or $av2 = $_ }
-	    if ((defined $av1) && (defined $av2)) {
-		$o->{pixmap_db}->draw_line($gca, $step-15, 151-$av1*150/$ech, $step-5, 151-$av2*150/$ech);
-		$av1 = $av2;
-		undef $av2;
-	    }
-	}
-	$step++;
-    }
-
-    my $switch = 1;
-    my $gcl = new Gtk::Gdk::GC($o->{darea}->window);
-    $gcl->set_foreground($o->{darea}->window->get_colormap->color_white());
-    $gcl->set_line_attributes (1, 'on-off-dash', 'not-last', 'round');
-    for (my $i = 30;$i<=120;$i+=30) {
-	$o->{pixmap_db}->draw_line($gcl, 50, $i, 300, $i);
-	my ($gc2, $text);
-	my ($dif1, $dif2);
-	if ($last_a) {
-	    $dif1 = abs(150-@{$o->{stack_ra}}[$last_a]*150/$ech - $i);
-	    $dif2 = abs(@{$o->{stack_ta}}[$last_a]*150/$ech - $i);
-	} else {
-	    $dif1 = abs(150-@{$o->{stack_r}}[@{$o->{stack_r}}-1]*150/$ech - $i);
-	    $dif2 = abs(@{$o->{stack_t}}[@{$o->{stack_t}}-1]*150/$ech - $i);
-	}
-	if ($dif1 < $dif2) {
-	    $text = formatXiB((150-$i)*$ech/150);
-	    $gc2=$gcr;
-	    my $x_l=5;
-	    if ($i > 30 && $switch) {
-		$o->{pixmap_db}->draw_line($gct, $x_l, 0, $x_l, $i-30);
-		$o->{pixmap_db}->draw_line($gct, $x_l-1, 0, $x_l-1, $i-30);
-		$o->{pixmap_db}->draw_line($gct, $x_l+1, 0, $x_l+1, $i-30);
-		$o->{pixmap_db}->draw_polygon($gct, 1, $x_l-4, $i-30, $x_l+5, $i-30, $x_l, $i-25);
-	    }
-	    if ($switch) {
-		$o->{pixmap_db}->draw_line($gcr, $x_l, 150, $x_l, $i);
-		$o->{pixmap_db}->draw_line($gcr, $x_l-1, 150, $x_l-1, $i);
-		$o->{pixmap_db}->draw_line($gcr, $x_l+1, 150, $x_l+1, $i);
-		$o->{pixmap_db}->draw_polygon($gcr, 1, $x_l-5, $i, $x_l+5, $i, $x_l, $i-6);
-	    }
-	    undef $switch;
-	} else {
-	    $text = formatXiB($i*$ech/150);
-	    $gc2=$gct;
-	}
-	my $w = $style->font->string_width($text);
-	$o->{pixmap_db}->draw_string($style->font, $gc2, 45-$w, $i+5, ($text) );
-    }
-    $o->{darea}->draw(undef);
-}
diff --git a/perl-install/standalone/printerdrake b/perl-install/standalone/printerdrake
deleted file mode 100755
index 501119148..000000000
--- a/perl-install/standalone/printerdrake
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/usr/bin/perl
-
-# printerdrake
-# Copyright (C) 1999 MandrakeSoft (fpons@mandrakesoft.com)
-# Original version for printer configuration from pad.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use printerdrake;
-use printer;
-use c;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-local $_ = join '', @ARGV;
-
-/-h/ and die "usage: printerdrake [--beginner] [--expert] [--auto] [--noauto] [--skiptest] [--testing] [--cups] [--lprng] [--lpd] [--pdq]\n";
-
-$::expert = /-expert/;
-$::noauto = /-noauto/;
-$::testing = /-testing/;
-
-my $printer;
-
-my $in = 'interactive'->vnew('su', 'printer');
-
-my $commandline = $_;
-
-{
-# Check whether Foomatic is installed and install it if necessary
-printerdrake::install_foomatic($in);
-
-my $w = $in->wait_message('', _("Reading printer data ..."));
-# Get what was installed before
-eval { $printer = printer::getinfo('') };
-# Choose the spooler by command line options
-$commandline =~ /-cups/ and
-    $printer->{SPOOLER} = 'cups' and printer::read_configured_queues($printer);
-$commandline =~ /-lpr/ and 
-    $printer->{SPOOLER} = 'lpd' and printer::read_configured_queues($printer);
-$commandline =~ /-lpd/ and 
-    $printer->{SPOOLER} = 'lpd' and printer::read_configured_queues($printer);
-$commandline =~ /-lprng/ and 
-    $printer->{SPOOLER} ='lprng' and printer::read_configured_queues($printer);
-$commandline =~ /-pdq/ and 
-    $printer->{SPOOLER} = 'pdq' and printer::read_configured_queues($printer);
--r '/etc/modules.conf' and modules::mergein_conf('/etc/modules.conf');
-}
-
-begin:
-$::isEmbedded and kill USR2, $::CCPID;
-
-printerdrake::main($printer, $in, 1);
-
-$::isEmbedded ? kill(USR1, $::CCPID) : $in->exit(0);
-goto begin;
diff --git a/perl-install/standalone/scannerdrake b/perl-install/standalone/scannerdrake
deleted file mode 100755
index b3b4dd402..000000000
--- a/perl-install/standalone/scannerdrake
+++ /dev/null
@@ -1,148 +0,0 @@
-#!/usr/bin/perl
-
-# scannerdrake $Id$
-# Yves Duret <yduret at mandrakesoft.com>
-# Copyright (C) 2001 MandrakeSoft
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(/usr/lib/libDrakX);
-
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-use interactive;
-use common;
-use scanner;
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/;
-for (@ARGV) {
-    /^--version$/ and die 'version: $Id$ '."\n";
-    /^--help$/ and die 'logdrake [--version] [--help] [--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] [--dynamic=dev]';
-    /^--update-usbtable$/ and do {scanner::updateScannerDBfromUsbtable(); exit;};
-    /^--update-sane=(.*)$/ and do {scanner::updateScannerDBfromSane($1); exit;};
-    /^--manual$/ and $::Manual=1;
-    /^--dynamic=(.*)$/ and do { dynamic($1); exit;};
-}
-
-$in = 'interactive'->vnew('su', 'default');
-$in->do_pkgs->install('sane-backends', 'xsane', if_($in->do_pkgs->is_installed('gimp'),'xsane-gimp'));
-if ($::Manual) {manual(); quit();}
-my $wait = $in->wait_message(_("Test ports"), _("Detecting devices ..."));
-@f = scanner::findScannerUsbport();
-$wait=undef;
-(@f) ? auto() : manual();
-quit();
-
-sub auto {
-    foreach (@f) { 
-	if (member($_->{val}{DESCRIPTION}), keys %$scanner::scannerDB) {
-	    my $name = $_->{val}{DESCRIPTION};
-	    $name =~ s/\s$//; #some HP entry have a trailing space, i will correct usbtable asap
-	    $in->ask_yesorno('scannerdrake',_("%s found on %s, configure it ?",$name,$_->{port}),1) or manual();
-	    tryConfScanner($name, $_->{port});
-	}
-    }
-}
-
-sub manual {
-    my $s = $in->ask_from_treelist('scannerdrake', _("Select a scanner"), '|', [' None', keys %$scanner::scannerDB], '' ) or return;
-    return if $s eq ' None';
-    tryConfScanner($s);
-}
-
-sub dynamic {
-    @f = scanner::findScannerUsbport();
-    foreach (@f) { 
-	if (member($_->{val}{DESCRIPTION}), keys %$scanner::scannerDB) {
-	    my $name = $_->{val}{DESCRIPTION};
-	    $name =~ s/\s$//; #some HP entry have a trailing space, i will correct usbtable asap
-	    scanner::confScanner($name, $_->{port}) unless($scanner::scannerDB->{$model}{flags}{unsupported});
-	}
-    }
-}
-
-sub tryConfScanner {
-    # take care if interactive ouptut is needed (unsupported, parallel..)
-    my ($model, $port) = @_;
-    if ($scanner::scannerDB->{$model}{flags}{unsupported}) {
-	$in->ask_warn('scannerdrake', _("This %s scanner is unsupported", $model));
-	return;
-    }
-    # if ($scanner::scannerDB->{$model}{driver} =~ /Parport/) {
-    # 	$in->ask_warn('scannerdrake', _("This %s scanner uses parallel port, which is unsupported for the moment", $model));
-    # 	return;
-    #     }
-    if ($scanner::scannerDB->{$model}{driver} =~ /SCSI/) {
-     	#$in->ask_warn('scannerdrake', _("This %s scanner uses parallel port, which is unsupported for the moment", $model));
-     	#return;
-    }
-    if ($scanner::scannerDB->{$model}{ask} =~ /DEVICE/) {
-	$port='/dev/sg0';
-	$in->ask_from('scannerdrake',
-		      _("Scannerdrake was not able to detect your %s scanner.\nPlease select the device where your scanner is plugged", $model),
-		      [
-		       { label => _("choose device"), val => \$port, list => ['/dev/sg0', '/dev/sg1', '/dev/sg2', '/dev/sg3', '/dev/sg4' ], not_edit => 0, sort => 1},
-		      ],
-		     ) or manual();
-    }
-
-    if ($scanner::scannerDB->{$model}{server} =~ /printerdrake/) {
-     	$in->ask_warn('scannerdrake', _("This %s scanner must be configured by printerdrake.\nYou can launch printerdrake from the Mandrake Control Center in Hardware section.", $model));
-     	return;
-    }
-    scanner::confScanner($model,$port);
-    $in->ask_warn(_("Congratulations!"),
-		  _("Your %s scanner has been configured.\nYou may now scan documents using ``XSane'' from Multimedia/Graphics in the applications menu.", $model));
-    
-}
-
-sub quit {
-    $::isEmbedded ? kill(USR1, $::CCPID) : $in->exit(0);
-}
-
-#-----------------------------------------------
-# $Log$
-# Revision 1.11  2002/03/11 06:43:36  yduret
-# re-re-re-re-re-re-uncomment the pkgs check line.
-#
-# Revision 1.10  2002/03/10 15:25:10  yduret
-# added ASK DEVICE support
-#
-# Revision 1.9  2002/03/09 14:23:48  yduret
-# added sum up at the end
-#
-# Revision 1.8  2002/03/09 00:58:36  yduret
-# uncomment line that checks if sane rpm is installed or not (thx gc).
-# i sux,
-#
-# Revision 1.7  2002/02/18 17:32:42  yduret
-# HP OfficeJet support
-#
-# Revision 1.6  2002/02/18 16:12:07  yduret
-# scsi/parport preliminary support
-#
-# Revision 1.5  2002/01/18 20:16:48  gc
-# - move 'use standalone' up to comply to 'explanations'
-# - fix a small english problem
-#
-# Revision 1.4  2001/11/19 17:39:03  pablo
-# Corrected English errors
-#
-# Revision 1.3  2001/11/19 10:50:37  yduret
-# added dynamic support
-#
-# Revision 1.2  2001/11/12 15:19:54  yduret
-# update
-#
diff --git a/perl-install/standalone/service_harddrake b/perl-install/standalone/service_harddrake
deleted file mode 100755
index 56fbfdbb5..000000000
--- a/perl-install/standalone/service_harddrake
+++ /dev/null
@@ -1,107 +0,0 @@
-#!/usr/bin/perl -w
-# harddrake2         This service runs the HardDrake hardware probe.
-#
-# chkconfig: 345 05 95
-# description:  This runs the hardware probe, and optionally configures \
-#               changed hardware.
-
-
-# TODO: start/stop/status/
-
-use lib qw(/usr/lib/libDrakX);
-
-use strict;
-use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
-
-if ($ARGV[0] !~ /^start$/) {
-	print "service harddrake [start|stop]\n";
-	exit 0;
-}
-
-use MDK::Common;
-use POSIX;
-
-use interactive;
-
-use harddrake::data;
-use Data::Dumper;
-
-my $hw_sysconfdir = "/etc/sysconfig/harddrake2";
-my $last_boot_config = "$hw_sysconfdir/previous_hw";
-
-my $str = '#!/usr/bin/perl -w
-#
-# Special file generated by harddrake service (cvs revision $Revision$).
-# Do not alter it; it\'ll be overwritten by harddrake2 service
-#
-# Format is : { Config_class_ID => {
-#                 Device => {
-#                   _Fields => values} ...} ...}
-#
-';
-
-my $in = 'interactive'->vnew('su');
-my $w = $in->wait_message(_("Please wait"), _("Hardware probing in progress"));
-
-# first run ? if not read old hw config
-my $previous_config = -f $last_boot_config ? do $last_boot_config : {};
-
-my %config;
-
-# For each hw, class, detect device, compare and offer to reconfigure if
-# needed
-foreach (@harddrake::data::tree) {
-    my ($Ident, $item, undef, $configurator, $detector) = @$_;
-
-    # No detector ? (should never happen but who know ?)
-    ref($detector) eq 'CODE' or next;
-
-    my %ID = map {
-	   my $i = $_;
-	   my $name = do {
-		  if ($item eq "Mouse") {
-			 $i->{media_type} = "MOUSE";
-			 $i->{device};
-		  } elsif (defined $i->{device}) {
-			 $i->{media_type} = "MASS_STORAGE_MEDIA";
-			 $i->{device};
-		  } else {
-			 join ':', map { $i->{$_} } qw(vendor id subvendor subid);
-		  }
-	   };
-	   $name => $i;
-    } &$detector;
-    $config{$Ident} = \%ID;
-
-    next if is_empty_hash_ref $previous_config;
-    my $oldconfig = $previous_config->{$Ident};
-
-    my $msg;
-    my @was_removed = difference2([ keys %$oldconfig ], [ keys %ID ]);
-    $msg .= _("Some devices in the \"%s\" hardware class were removed:\n", $item) if @was_removed;
-    $msg .= "- $_ was removed\n" foreach @was_removed;
-    
-    my @added = difference2([ keys %ID ], [ keys %$oldconfig ]);
-    $msg .= _("\nSome devices in the %s class were added:\n", $item) if @added;
-    $msg .= "- $_ was added\n" foreach @added;
-    @added || @was_removed or next;
-   
-    next unless (-x $configurator);
-    undef $w;
-
-    if ($in->ask_okcancel("Hardware changes in $Ident class",
-					 $msg . "\nDo you want to run the appropriate config tool ?", 1)) {
-	   
-	   if (my $pid = fork) {
-		  POSIX::wait();
-		} else {
-		    exec($configurator) or die "$configurator missing\n";
-		}
-    }
-}
-
-
-$Data::Dumper::Terse = 1;          # don't output names where feasible
-$Data::Dumper::Purity = 1;         # fill in the holes for eval
-# output new hw config
-output("$last_boot_config",  $str . Dumper(\%config) . ";\n");
diff --git a/perl-install/steps.pm b/perl-install/steps.pm
deleted file mode 100644
index d2506cf8a..000000000
--- a/perl-install/steps.pm
+++ /dev/null
@@ -1,51 +0,0 @@
-package steps;
-
-use strict;
-use vars qw(%installSteps @orderedInstallSteps);
-use common;
-
-#-######################################################################################
-#- Steps table
-#-######################################################################################
-{
-    my @installStepsFields = qw(text redoable onError hidden needs icon); 
-    #entered reachable toBeDone next done;
-    my @installSteps = (
-  selectLanguage     => [ __("Choose your language"), 1, 1, '', '', 'language' ],
-  selectInstallClass => [ __("Select installation class"), 1, 1, '', '', '' ],
-  setupSCSI          => [ __("Hard drive detection"), 1, 0, '', '', 'harddrive' ],
-  selectMouse        => [ __("Configure mouse"), 1, 1, '', "selectInstallClass", 'mouse' ],
-  selectKeyboard     => [ __("Choose your keyboard"), 1, 1, '', "selectInstallClass", 'keyboard' ],
-  miscellaneous      => [ __("Security"), 1, 1, '!$::expert', '', 'security' ],
-  doPartitionDisks   => [ __("Setup filesystems"), 1, 0, '', "selectInstallClass", 'partition' ],
-  formatPartitions   => [ __("Format partitions"), 1, -1, '$o->{isUpgrade}', "doPartitionDisks", 'partition' ],
-  choosePackages     => [ __("Choose packages to install"), 1, -2, '!$::expert', "formatPartitions", 'partition' ],
-  installPackages    => [ __("Install system"), 1, -1, '', ["formatPartitions", "selectInstallClass"], '' ],
-  setRootPassword    => [ __("Set root password"), 1, 1, '', "installPackages", 'rootpasswd' ],
-  addUser            => [ __("Add a user"), 1, 1, '', "installPackages", 'user' ],
-  configureNetwork   => [ __("Configure networking"), 1, 1, '', "formatPartitions", 'network' ],
-  summary            => [ __("Summary"), 1, 0, '', "installPackages", 'summary' ],
-  configureServices  => [ __("Configure services"), 1, 1, '!$::expert', "installPackages", 'services' ],
-  setupBootloader    => [ __("Install bootloader"), 1, 0, '', "installPackages", 'bootloader' ],
-if_((arch() !~ /alpha/) && (arch() !~ /ppc/),
-  createBootdisk     => [ __("Create a bootdisk"), 1, 0, '', "installPackages", 'bootdisk' ],
-),
-  configureX         => [ __("Configure X"), 1, 1, '', ["formatPartitions", "setupBootloader"], 'X' ],
-  installUpdates     => [ __("Install system updates"), 1, 1, '',  ["installPackages", "configureNetwork", "summary"], '' ],
-  exitInstall        => [ __("Exit install"), 0, 0, '!$::expert && !$::live', '', 'exit' ],
-);
-    for (my $i = 0; $i < @installSteps; $i += 2) {
-	my %h; @h{@installStepsFields} = @{ $installSteps[$i + 1] };
-	$h{next}    = $installSteps[$i + 2];
-	$h{entered} = 0;
-	$h{onError} = $installSteps[$i + 2 * $h{onError}];
-	$h{reachable} = !$h{needs};
-	$installSteps{ $installSteps[$i] } = \%h;
-	push @orderedInstallSteps, $installSteps[$i];
-    }
-    $installSteps{first} = $installSteps[0];
-}
-
-
-#- Wonderful perl :(
-1;
diff --git a/perl-install/swap.pm b/perl-install/swap.pm
deleted file mode 100644
index 7b7597c10..000000000
--- a/perl-install/swap.pm
+++ /dev/null
@@ -1,136 +0,0 @@
-package swap; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::DataStructure;
-use common;
-use log;
-use devices;
-use c;
-
-
-my $pagesize = c::getpagesize();
-my $signature_page = "\0" x $pagesize;
-
-# Maximum allowable number of pages in one swap.
-# From 2.2.0 onwards, this depends on how many offset bits
-# the architectures can actually store into the page tables
-# and on 32bit architectures it is limited to 2GB at the
-# same time.
-# Old swap format keeps the limit of 8*pagesize*(pagesize - 10)
-
-my $V0_MAX_PAGES = 8 * $pagesize - 10;
-my $V1_OLD_MAX_PAGES = int 0x7fffffff / $pagesize - 1;
-my $V1_MAX_PAGES = $V1_OLD_MAX_PAGES; #- (1 << 24) - 1;
-my $MAX_BADPAGES = int ($pagesize - 1024 - 128 * $sizeof_int - 10) / $sizeof_int;
-my $signature_format_v1 = "x1024 I I I I125"; #- bootbits, version, last_page, nr_badpages, padding
-
-1;
-
-sub kernel_greater_or_equal($$$) {
-    c::kernel_version() =~ /(\d*)\.(\d*)\.(\d*)/;
-    ($1 <=> $_[0] || $2 <=> $_[1] || $3 <=> $_[2]) >= 0;
-}
-
-sub check_blocks {
-    my ($fd, $version, $nbpages) = @_;
-    my ($last_read_ok, $badpages) = (0, 0);
-    my ($buffer);
-    my $badpages_field_v1 = \substr($signature_page, psizeof($signature_format_v1));
-
-    for (my $i = 0; $i < $nbpages; $i++) {
-
-	$last_read_ok || sysseek($fd, $i * $pagesize, 0) or die "seek failed";
-
-	unless ($last_read_ok = sysread($fd, $buffer, $pagesize)) {
-	    if ($version == 1) {
-		$badpages == $MAX_BADPAGES and die "too many bad pages";
-		vec($$badpages_field_v1, $badpages, $bitof_int) = $i;
-	    }
-	    $badpages++;
-	}
-	vec($signature_page, $i, 1) = to_bool($last_read_ok) if $version == 0;
-    }
-
-    #- TODO: add interface
-
-    $badpages and log::l("$badpages bad pages\n");
-    return $badpages;
-}
-
-sub make($;$) {
-    my ($devicename, $checkBlocks) = @_;
-    my $tmpdev = 0;
-    my $badpages = 0;
-    my ($version, $maxpages);
-
-    $devicename = devices::make($devicename);
-
-    my $nbpages = divide(devices::size($devicename), $pagesize);
-
-    if ($nbpages <= $V0_MAX_PAGES || !kernel_greater_or_equal(2,1,117) || $pagesize < 2048) {
-	$version = 0;
-    } else {
-	$version = 1;
-    }
-
-    $nbpages >= 10 or die "swap area needs to be at least " . (10 * $pagesize / 1024) . "kB";
-
-    -b $devicename or $checkBlocks = 0;
-    my $rdev = (stat $devicename)[6];# or log::l("stat of $devicename failed: $!");
-    $rdev == 0x300 || $rdev == 0x340 and die "$devicename is not a good device for swap";
-
-    sysopen F, $devicename, 2 or die "opening $devicename for writing failed: $!";
-
-    if ($version == 0) { $maxpages = $V0_MAX_PAGES; }
-    elsif (kernel_greater_or_equal(2,2,1)) { $maxpages = $V1_MAX_PAGES; }
-    else { $maxpages = min($V1_OLD_MAX_PAGES, $V1_MAX_PAGES); }
-
-    if ($nbpages > $maxpages) {
-	$nbpages = $maxpages;
-	log::l("warning: truncating swap area to " . ($nbpages * $pagesize / 1024) . "kB");
-    }
-
-    if ($checkBlocks) {
-	$badpages = check_blocks(*F, $version, $nbpages);
-    } elsif ($version == 0) {
-	for (my $i = 0; $i < $nbpages; $i++) { vec($signature_page, $i, 1) = 1; }
-    }
-
-    $version == 0 and !vec($signature_page, 0, 1) and die "bad block on first page";
-    vec($signature_page, 0, 1) = 0;
-
-    $version == 1 and MDK::Common::DataStructure::strcpy($signature_page, pack($signature_format_v1, $version, $nbpages - 1, $badpages));
-
-    my $goodpages = $nbpages - $badpages - 1;
-    $goodpages > 0 or die "all blocks are bad";
-
-    log::l("Setting up swapspace on $devicename version $version, size = " . $goodpages * $pagesize . " bytes");
-
-    MDK::Common::DataStructure::strcpy($signature_page, $version == 0 ? "SWAP-SPACE" : "SWAPSPACE2", $pagesize - 10);
-
-    my $offset = ($version == 0) ? 0 : 1024;
-    sysseek(F, $offset, 0) or die "unable to rewind swap-device: $!";
-
-    syswrite(F, substr($signature_page, $offset)) or die "unable to write signature page: $!";
-
-    #- A subsequent swapon() will fail if the signature is not actually on disk. (This is a kernel bug.)
-    syscall_('fsync', fileno(F)) or die "fsync failed: $!";
-    close F;
-}
-
-sub enable($;$) {
-    my ($devicename, $checkBlocks) = @_;
-    make($devicename, $checkBlocks);
-    swapon($devicename);
-}
-
-sub swapon($) {
-    log::l("swapon called with $_[0]");
-    syscall_('swapon', devices::make($_[0]), 0) or die "swapon($_[0]) failed: $!";
-}
-
-sub swapoff($) {
-    syscall_('swapoff', devices::make($_[0])) or die "swapoff($_[0]) failed: $!";
-}
diff --git a/perl-install/timezone.pm b/perl-install/timezone.pm
deleted file mode 100644
index bf78d4ff1..000000000
--- a/perl-install/timezone.pm
+++ /dev/null
@@ -1,198 +0,0 @@
-package timezone; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($ntp_servers);
-
-use common;
-use log;
-
-
-sub getTimeZones {
-    my ($prefix) = @_;
-    local *F;
-    open F, "cd $prefix/usr/share/zoneinfo && find [A-Z]* -type f |";
-    my @l = chomp_(<F>);
-    close F or die "cannot list the available zoneinfos";
-    sort @l;
-}
-
-sub read {
-    my ($prefix) = @_;
-    my $f = "$prefix/etc/sysconfig/clock";
-    my %t = getVarsFromSh($f) or return;
-
-    (timezone => $t{ZONE}, UTC => text2bool($t{UTC}));
-}
-
-sub ntp_server {
-    my ($prefix, $server) = @_;
-
-    my $f = "$prefix/etc/ntp.conf";
-    -e $f or return;
-
-    if (@_ > 1) {
-	my $added = 0;
-	substInFile {
-	    if (/^#?\s*server\s+(\S*)/ && $1 ne '127.127.1.0') {
-		$_ = $added ? "#server $1\n" : "server $server\n";
-		$added = 1;
-	    }
-	} $f;
-	output("$prefix/etc/ntp/step-tickers", "$server\n");
-    } else {
-	($server) = grep { $_ ne '127.127.1.0' } map { if_(/^\s*server\s+(\S*)/, $1) } cat_($f);
-    }
-    $server;
-}
-
-sub write {
-    my ($prefix, $t) = @_;
-
-    ntp_server($prefix, $t->{ntp});
-
-    eval { cp_af("$prefix/usr/share/zoneinfo/$t->{timezone}", "$prefix/etc/localtime") };
-    $@ and log::l("installing /etc/localtime failed");
-    setVarsInSh("$prefix/etc/sysconfig/clock", {
-	ZONE => $t->{timezone},
-	UTC  => bool2text($t->{UTC}),
-	ARC  => "false",
-    });
-}
-
-my %l2t = (
-'Afrikaans (South Africa)' => 'Africa/Johannesburg',
-'Arabic' => 'Africa/Cairo',
-'Armenian (Armenia)' => 'Asia/Yerevan',
-'Azeri (Azerbaijan)' => 'Asia/Baku',
-'Belarussian (Belarus)' => 'Europe/Minsk',
-'Bosnian (Bosnia)' => 'Europe/Sarajevo',
-'Brezhoneg (Brittany)' => 'Europe/Paris',
-'Bulgarian (Bulgaria)' => 'Europe/Sofia',
-'Catalan' => 'Europe/Madrid',
-'Chinese Traditional (Taiwan)' => 'Asia/Taipei',
-'Chinese Simplified (China)' => 'Asia/Beijing',
-'Croatian (Bosnia)' => 'Europe/Sarajevo',
-'Croatian (Croatia)' => 'Europe/Zagreb',
-'Cymraeg (Welsh)' => 'Europe/London',
-'Czech' => 'Europe/Prague',
-'Danish (Denmark)' => 'Europe/Copenhagen',
-'Dutch (Netherlands)' => 'Europe/Amsterdam',
-'English (United States)' => 'America/New_York',
-'English (United Kingdom)' => 'Europe/London',
-'Esperanto' => 'Europe/Warsaw',
-'Estonian (Estonia)' => 'Europe/Tallinn',
-'Euskara (Basque)' => 'Europe/Madrid',
-'Finnish (Finland)' => 'Europe/Helsinki',
-'French (France)' => 'Europe/Paris',
-'French (Belgium)' => 'Europe/Brussels',
-'French (Canada)' => 'Canada/Atlantic', # or Newfoundland ? or Eastern ?
-'Gaeilge (Ireland)' => 'Europe/Dublin',
-'Galego' => 'Europe/Madrid',
-'Georgian (Georgia)' => 'Asia/Yerevan',
-'German (Austria)' => 'Europe/Vienna',
-'German (Germany)' => 'Europe/Berlin',
-'Greek (Greece)' => 'Europe/Athens',
-'Greenlandic' => 'Arctic/Longyearbyen',
-'Hebrew (Israel)' => 'Asia/Tel_Aviv',
-'Hungarian (Hungary)' => 'Europe/Budapest',
-'Icelandic (Iceland)' => 'Atlantic/Reykjavik',
-'Indonesian (Indonesia)' => 'Asia/Jakarta',
-'Iranian (Iran)' => 'Asia/Tehran',
-'Italian (Italy)' => 'Europe/Rome',
-#-'Italian (San Marino)' => 'Europe/San_Marino',
-#-'Italian (Vatican)' => 'Europe/Vatican',
-#-'Italian (Switzerland)' => 'Europe/Zurich',
-'Japanese (Japon)' => 'Asia/Tokyo',
-'Korean (Korea)' => 'Asia/Seoul',
-'Latvian (Latvia)' => 'Europe/Riga',
-'Lithuanian (Lithuania)' => 'Europe/Vilnius',
-'Macedonian (Macedonia)' => 'Europe/Skopje',
-'Maori (New Zealand)' => 'Australia/Sydney',
-'Norwegian (Bokmaal)' => 'Europe/Oslo',
-'Norwegian (Nynorsk)' => 'Europe/Oslo',
-'Polish (Poland)' => 'Europe/Warsaw',
-'Portuguese (Brazil)' => 'Brazil/East', # most people live on the east coast
-'Portuguese (Portugal)' => 'Europe/Lisbon',
-'Romanian (Rumania)' => 'Europe/Bucharest',
-'Russian (Russia)' => 'Europe/Moscow',
-'Serbian (Serbia)' => 'Europe/Belgrade',
-'Slovak (Slovakia)' => 'Europe/Bratislava',
-'Slovenian (Slovenia)' => 'Europe/Ljubljana',
-'Spanish (Argentina)' => 'America/Buenos_Aires',
-'Spanish (Mexico)' => 'America/Mexico_City',
-'Spanish (Spain)' => 'Europe/Madrid',
-'Swedish (Sweden)' => 'Europe/Stockholm',
-'Tajik (Tajikistan)' => 'Asia/Dushanbe',
-'Tamil (Sri Lanka)' => 'Asia/Colombo',
-'Tatar' => 'Europe/Minsk',
-'Thai (Thailand)' => 'Asia/Bangkok',
-'Turkish (Turkey)' => 'Europe/Istanbul',
-'Ukrainian (Ukraine)' => 'Europe/Kiev',
-'Uzbek (Uzbekistan)' => 'Asia/Tashkent',
-'Vietnamese (Vietnam)' => 'Asia/Saigon',
-'Walon (Belgium)' => 'Europe/Brussels',
-);
-
-sub fuzzyChoice { 
-    my ($b, $count) = common::bestMatchSentence($_[0], keys %l2t);
-    $count ? $b : '';
-}
-sub bestTimezone { $l2t{fuzzyChoice($_[0])} || 'GMT' }
-
-my %sex = (
-fr_FR => { '[iln]a$' => 1, '[cdilnst]e$' => 1, 'e$' => .8, 'n$' => .1, 'd$' => .05, 't$' => 0 },
-en => { 'a$' => 1, 'o$' => 0, '[ln]$' => .3, '[rs]$' => .2 },
-);
-
-
-sub sexProb($) {
-    local ($_) = @_;
-    my $l = $sex{$ENV{LC_ALL}} or return 0.5;
-
-    my ($prob, $nb) = (0, 0);
-    foreach my $k (keys %$l) {
-	/$k/ and $prob += $l->{$k}, $nb++;
-    }
-    $nb ? $prob / $nb : 0.5;
-}
-
-$ntp_servers = 
-q(Australia (ntp.adelaide.edu.au)
-Australia (ntp.saard.net)
-Australia (time.esec.com.au)
-Canada (ntp.cpsc.ucalgary.ca)
-Canada (ntp1.cmc.ec.gc.ca)
-Canada (ntp2.cmc.ec.gc.ca)
-Canada (time.chu.nrc.ca)
-Canada (time.nrc.ca)
-Canada (timelord.uregina.ca)
-Spain (slug.ctv.es)
-France (ntp.univ-lyon1.fr)
-Croatia (zg1.ntp.carnet.hr)
-Croatia (zg2.ntp.carnet.hr)
-Croatia (st.ntp.carnet.hr)
-Croatia (ri.ntp.carnet.hr)
-Croatia (os.ntp.carnet.hr)
-Indonesia (ntp.incaf.net)
-Italy (time.ien.it)
-Korea, republic of (time.nuri.net)
-Norway (fartein.ifi.uio.no)
-Russia (ntp.landau.ac.ru)
-Singapore (ntp.shim.org)
-Slovenia (time.ijs.si)
-United kingdom (ntp.cs.strath.ac.uk)
-United kingdom (ntp2a.mcc.ac.uk)
-United kingdom (ntp2b.mcc.ac.uk)
-United kingdom (ntp2c.mcc.ac.uk)
-United kingdom (ntp2d.mcc.ac.uk)
-United states DE (louie.udel.edu)
-United states IL (ntp-0.cso.uiuc.edu)
-United states IL (ntp-1.cso.uiuc.edu)
-United states IL (ntp-2.cso.uiuc.edu)
-United states IN (gilbreth.ecn.purdue.edu)
-United states IN (harbor.ecn.purdue.edu)
-United states IN (molecule.ecn.purdue.edu)
-);
-
-1;
diff --git a/perl-install/unused/.cvsignore b/perl-install/unused/.cvsignore
deleted file mode 100644
index 72e8ffc0d..000000000
--- a/perl-install/unused/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-*
diff --git a/perl-install/unused/cdrom.pm b/perl-install/unused/cdrom.pm
deleted file mode 100644
index 040ac7e98..000000000
--- a/perl-install/unused/cdrom.pm
+++ /dev/null
@@ -1,41 +0,0 @@
-package cdrom; # $Id$
-
-use diagnostics;
-use strict;
-
-use detect_devices;
-
-
-my %transTable = ( cm206 => 'cm206cd', sonycd535 => 'cdu535');
-
-1;
-
-
-sub setupCDdevicePanel {
-    my ($type) = @_;
-}
-
-sub findAtapi {
-    my $ide = ideGetDevices();
-    foreach (@$ide) { $_->{type} eq 'cdrom' and return $_->{device} }
-    error();
-}
-
-sub findSCSIcdrom {
-    detect_devices::isSCSI() or return error();
-    my $scsi = detect_devices::getSCSI();
-    foreach (@$scsi) { $_->{type} eq 'cdrom' and return $_->{device} }
-    error();
-}
-
-sub setupCDdevice {
-    my ($cddev, $dl) = @_;
-    #-TODO
-}
-
-sub removeCDmodule {
-    #- this wil fail silently if no CD module has been loaded
-    removeDeviceDriver('cdrom');
-    1;
-}
-
diff --git a/perl-install/unused/christmas-karaoke.patch b/perl-install/unused/christmas-karaoke.patch
deleted file mode 100644
index a700bc2c1..000000000
--- a/perl-install/unused/christmas-karaoke.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-Index: Makefile
-===================================================================
-RCS file: /home/cvs/cooker/gi/perl-install/Makefile,v
-retrieving revision 1.151
-diff -u -r1.151 Makefile
---- Makefile	2000/12/19 18:21:05	1.151
-+++ Makefile	2000/12/20 23:29:33
-@@ -44,7 +44,7 @@
- 
- 	cp share/*.rc $(DESTREP4PMS)
- 	install -d $(DESTREP4PMS)/po
--	cp -f share/po/*.po* $(DESTREP4PMS)/po ||:
-+#	cp -f share/po/*.po* $(DESTREP4PMS)/po ||:
- 	chmod a+x $(DESTREP4PMS)/install2
- 	chmod a+x $(DESTREP4PMS)/commands
- 	chmod a+x $(DESTREP4PMS)/standalone/*
-@@ -61,6 +61,21 @@
- 	cat `../tools/specific_arch share/list` >> /tmp/list
- 	find auto -follow -name "*.so" >> /tmp/list
- 
-+	rpm -ql icewm-light | grep /usr/X11R6 >> /tmp/list
-+	rpm -ql xmms libao0 | grep /usr/lib >> /tmp/list
-+	echo /sbin/isapnp >> /tmp/list
-+	echo /sbin/pnpdump >> /tmp/list
-+	echo /usr/sbin/sndconfig >> /tmp/list
-+	echo /usr/bin/vim >> /tmp/list
-+	echo /usr/bin/aumix >> /tmp/list
-+	echo /usr/bin/ogg123 >> /tmp/list
-+	echo /usr/bin/qiv >> /tmp/list
-+	echo /usr/lib/libimlib-jpeg.so >> /tmp/list
-+	echo /usr/bin/xmms >> /tmp/list
-+	echo /usr/lib/xmms/Visualization/libxmms_singit.so >> /tmp/list
-+	echo /usr/X11R6/lib/X11/rgb.txt >> /tmp/list
-+	echo /bin/bash >> /tmp/list
-+
- 	for i in $(LOCALFILES) `cat /tmp/list` ; do \
- 		ldd $$i 2>/dev/null | grep "=>" | sed -e 's/.*=> //' -e 's/ .*//' | uniq | sort >> /tmp/list; \
- 	done
-@@ -106,6 +121,7 @@
- 	    fi; \
- 	done
- 	mv -f $(DEST)/lib/libimlib-png.so $(DEST)/usr/lib
-+	mv -f $(DEST)/lib/libimlib-jpeg.so $(DEST)/usr/lib
- 
- 	mv -f $(DEST)/bin/* $(DEST)/sbin/* $(DEST)/usr/bin
- 	cd $(DEST)/usr/bin ; mv insmod insmod_
-@@ -135,6 +151,16 @@
- 
- #	echo -e '#!/bin/sh\n\nexec "/usr/bin/sh"' > $(DEST)/usr/bin/runinstall2
- #	chmod a+x $(DEST)/usr/bin/runinstall2
-+
-+	rm -f $(DEST)/usr/X11R6/lib/X11/fonts/{gb16st,k14,taipei16,baekmuk_gulim_12}.pcf.gz
-+	cp -f /usr/X11R6/lib/X11/fonts2/75dpi/helv* $(DEST)/usr/X11R6/lib/X11/fonts/
-+	mkfontdir $(DEST)/usr/X11R6/lib/X11/fonts 2>/dev/null
-+	install $(ROOTDEST)/Mandrake/images/rotate $(DEST)/usr/bin
-+
-+	echo -e "prog xmms xmms xmms\nprog aumix aumix aumix" > $(DEST)/usr/X11R6/lib/X11/icewm/toolbar
-+	echo -e "prog xmms xmms xmms\nprog aumix aumix aumix" > $(DEST)/usr/X11R6/lib/X11/icewm/menu
-+	echo -e "Theme=bluePlastic/default.theme\nTaskBarAutoHide=1" > $(DEST)/usr/X11R6/lib/X11/icewm/preferences
-+
- 
- ifeq (i386,$(ARCH))
- 	cp -a /etc/pcmcia $(DEST)/etc
-Index: install_steps_gtk.pm
-===================================================================
-RCS file: /home/cvs/cooker/gi/perl-install/install_steps_gtk.pm,v
-retrieving revision 1.171
-diff -u -r1.171 install_steps_gtk.pm
---- install_steps_gtk.pm	2000/12/20 21:57:35	1.171
-+++ install_steps_gtk.pm	2000/12/20 23:29:33
-@@ -99,6 +99,27 @@
- 	}
-     }
-   OK:
-+    keyboard::setup("fr");
-+    commands::mknod("/dev/dsp", "c", 14, 3);
-+    commands::mknod("/dev/mixer", "c", 14, 0);
-+    if (!$::expert) {
-+	if (!modules::load_thiskind("sound")) {
-+	    eval {
-+		symlink "/usr/bin/pnpdump", "/sbin/pnpdump";
-+		run_program::run("sndconfig", "--quiet");
-+		run_program::run("isapnp", "/etc/isapnp.conf");
-+		my @l = cat_("/etc/modules.conf");
-+		my $module; /alias sound-slot-0 (\S+)/ and $module = $1 foreach @l;
-+		my @options; /options\s+$module\s+(.*)/ and @options = split ' ', $1 foreach @l;
-+		modules::load($module, 'sound', @options);
-+	    }
-+	}
-+    }
-+    symlink "/tmp/rhimage/lyrics", "/lyrics";
-+    symlink "/tmp/rhimage", "/Sound";
-+    fork or exec "rotate /tmp/rhimage/Mandrake/images" or die;
-+    fork or exec $_ or die foreach "xmms";
-+    exec "icewm-light" or die;
-     install_gtk::init_sizes();
-     install_gtk::default_theme($o);
-     install_gtk::create_logo_window($o);
diff --git a/perl-install/unused/dns.pm b/perl-install/unused/dns.pm
deleted file mode 100644
index 5e6bb5f5b..000000000
--- a/perl-install/unused/dns.pm
+++ /dev/null
@@ -1,64 +0,0 @@
-use diagnostics;
-use strict;
-
-# This is dumb, but glibc doesn't like to do hostname lookups w/o libc.so
-
-
-#TODO TODO
-sub doQuery {
-#    my ($query, $queryType, $domainName, $ipNum) = @_;
-#
-#    _res.retry = 2;
-#
-#    len = res_search(query, C_IN, queryType, (void *) &response,
-#		     sizeof(response));
-#    if (len <= 0) return -1;
-#
-#    if (ntohs(response.hdr.rcode) != NOERROR) return -1;
-#    ancount = ntohs(response.hdr.ancount);
-#    if (ancount < 1) return -1;
-#
-#    data = response.buf + sizeof(HEADER);
-#    end = response.buf + len;
-#
-#    # skip the question
-#    data += dn_skipname(data, end) + QFIXEDSZ;
-#
-#    # parse the answer(s)
-#    while (--ancount >= 0 && data < end) {
-#
-#      # skip the domain name portion of the RR record
-#      data += dn_skipname(data, end);
-#
-#      # get RR information
-#      GETSHORT(type, data);
-#      data += INT16SZ; # skipp class
-#      data += INT32SZ; # skipp TTL
-#      GETSHORT(len,  data);
-#
-#      if (type == T_PTR) {
-#	 # we got a pointer
-#	 len = dn_expand(response.buf, end, data, name, sizeof(name));
-#	 if (len <= 0) return -1;
-#	 if (queryType == T_PTR && domainName) {
-#	   # we wanted a pointer
-#	   *domainName = malloc(strlen(name) + 1);
-#	   strcpy(*domainName, name);
-#	   return 0;
-#	 }
-#      } else if (type == T_A) {
-#	 # we got an address
-#	 if (queryType == T_A && ipNum) {
-#	   # we wanted an address
-#	   memcpy(ipNum, data, sizeof(*ipNum));
-#	   return 0;
-#	 }
-#      }
-#
-#      # move ahead to next RR
-#      data += len;
-#    }
-#
-#    return -1;
-}
-
diff --git a/perl-install/unused/otherinsmod.pm b/perl-install/unused/otherinsmod.pm
deleted file mode 100644
index 1a8eee9ff..000000000
--- a/perl-install/unused/otherinsmod.pm
+++ /dev/null
@@ -1,26 +0,0 @@
-use diagnostics;
-use strict;
-
-sub insmod {
-
-    @_ or die "usage: insmod <module>.o [params]\n";
-
-    my $file = shift;
-    my $tmpname;
-
-    unless (-r $file) {
-	local *F;
-	open F, "/modules/modules.cgz" or die "error opening /modules/modules.cgz";
-
-	$tmpname = "/tmp/" . basename($file);
-
-	installCpioFile(\*F, $file, $tmpname, 0) or die "error extracting file";
-    }
-
-    my $rc = insmod_main($tmpname || $file, @_);
-
-    unlink($tmpname);
-
-    return $rc;
-}
-sub modprobe { &insmod }
diff --git a/perl-install/unused/scsi.pm b/perl-install/unused/scsi.pm
deleted file mode 100644
index 8e20f7d70..000000000
--- a/perl-install/unused/scsi.pm
+++ /dev/null
@@ -1,104 +0,0 @@
-use diagnostics;
-use strict;
-
-my $scsiDeviceAvailable;
-my $CSADeviceAvailable;
-
-1;
-
-sub scsiDeviceAvailable {
-    defined $scsiDeviceAvailable and return $scsiDeviceAvailable;
-    local *F;
-    open F, "/proc/scsi/scsi" or log::l("failed to open /proc/scsi/scsi: $!"), return 0;
-    foreach (<F>) {
-	/devices: none/ and log::l("no scsi devices are available"), return $scsiDeviceAvailable = 0;
-    }
-    log::l("scsi devices are available");
-    $scsiDeviceAvailable = 1;
-}
-
-sub CompaqSmartArrayDeviceAvailable {
-    defined $CSADeviceAvailable and return $CSADeviceAvailable;
-    -r "/proc/array/ida0" or log::l("failed to open /proc/array/ida0: $!"), return $CSADeviceAvailable = 0;
-    log::l("Compaq Smart Array controllers available");
-    $CSADeviceAvailable = 1;
-}
-
-sub scsiGetDevices {
-    my @drives;
-    my ($driveNum, $cdromNum, $tapeNum) = qw(0 0 0);
-    my $err = sub { chop; log::l("unexpected line in /proc/scsi/scsi: $_"); error() };
-    local $_;
-
-    local *F;
-    open F, "/proc/scsi/scsi" or return &$err();
-    $_ = <F>; /^Attached devices:/ or return &$err();
-    while ($_ = <F>) {
-	my ($id) = /^Host:.*?Id: (\d+)/ or return &$err();
-	$_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or return &$err();
-	$_ = <F>; my ($type) = /^\s*Type:\s*(.*)/ or &$err();
-	my $device;
-	if ($type =~ /Direct-Access/) {
-	    $type = 'hd';
-	    $device = "sd" . chr($driveNum++ + ord('a'));
-	} elsif ($type =~ /Sequential-Access/) {
-	    $type = 'tape';
-	    $device = "st" . $tapeNum++;
-	} elsif ($type =~ /CD-ROM/) {
-	    $type = 'cdrom';
-	    $device = "scd" . $cdromNum++;
-	}
-	$device and push @drives, { device => $device, type => $type, info => "$vendor $model", id => $id, bus => 0 };
-    }
-    [ @drives ];
-}
-
-sub ideGetDevices {
-    my @idi;
-
-    -r "/proc/ide" or die "sorry, /proc/ide not available, seems like you have a pre-2.2 kernel\n => not handled yet :(";
-
-    #- Great. 2.2 kernel, things are much easier and less error prone.
-    foreach my $d (glob_('/proc/ide/hd*')) {
-	my ($t) = chomp_(cat_("$d/media"));
-	my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
-	my ($info) = chomp_(cat_("$d/model")); $info ||= "(none)";
-
-	my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
-	push @idi, { type => $type, device => basename($d), info => $info, bus => $num/2, id => $num%2 };
-    }
-    [ @idi ];
-}
-
-
-sub CompaqSmartArrayGetDevices {
-    my @idi;
-    my $f;
-
-    for (my $i = 0; -r ($f = "/proc/array/ida$i"); $i++) {
-	local *F;
-	open F, $f or die;
-	local $_ = <F>;
-	my ($name) = m|ida/(.*?):| or next;
-	push @idi, { device => $name, info => "Compaq RAID logical disk", type => 'hd' };
-    }
-    [ @idi ];
-}
-
-sub dac960GetDevices {
-    my @idi;
-    my $file = "/var/log/dmesg";
-    -r $file or $file = "/tmp/syslog";
-
-    local *F;
-    open F, $file or die "Failed to open $file: $!";
-
-    #- We are looking for lines of this format:DAC960#0:
-    #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
-    foreach (<F>) {
-	my ($devicename, $info) = m|/dev/rd/(.*?): (.*?),| or next;
-	push @idi, { info => $info, type => 'hd', devicename => $devicename };
-	log::l("DAC960: $devicename: $info");
-    }
-    [ @idi ];
-}
diff --git a/perl-install/verify_c b/perl-install/verify_c
deleted file mode 100755
index b07355b2f..000000000
--- a/perl-install/verify_c
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/bin/perl -n
-
-/^#/ and next;
-/c::to_utf8/ and next;
-/\bc::(\w+)/ and push @c, [ $1, $ARGV, $. ] ;
-
-eof && close ARGV;
-
-END {
-    $_ = join '', `cat c/stuff.xs.pm`; 
-    foreach $c (@c) {
-	/$c->[0]/ or $err = print "$c->[1]:$c->[2]: $c->[0] not in c.xs\n";
-    }
-    exit $err;
-}